diff options
1631 files changed, 103492 insertions, 95501 deletions
diff --git a/ANNOUNCE.13_0 b/ANNOUNCE.13_0 deleted file mode 100644 index 464591329..000000000 --- a/ANNOUNCE.13_0 +++ /dev/null @@ -1,214 +0,0 @@ - -Yes it's that time again! After many months of development and careful -testing, we are proud to announce the release of Slackware version 13.0! - -We are sure you'll agree that the improvements made in this release more -than warrant the major version bump up from the 12.x series. We've done our -best to bring the latest technology to Slackware while still maintaining the -stability and security that you have come to expect. Slackware is well known -for it's simplicity and the fact that we try to bring software to you in the -condition that the authors intended. - -Probably the biggest change is the addition of an official 64-bit port. -While the 32-bit (x86) version continues to be developed, this release brings -to you a complete port to 64-bit (x86_64). We know that many of you have -been waiting eagerly for this, and once you try it you'll see it was well -worth the wait. - -Slackware 13.0 brings many updates and enhancements, among which you'll find -two of the most advanced desktop environments available today: Xfce 4.6.1, -a fast and lightweight but visually appealing and easy to use desktop -environment, and KDE 4.2.4, a recent stable release of the new 4.2.x series -of the award-winning K Desktop Environment. We continue to make use of HAL -(Hardware Abstraction Layer) which allows the system administrator to grant -use of various hardware devices according to users' group membership so that -they will be able to use items such as USB flash sticks, USB cameras that -appear like USB storage, portable hard drives, CD and DVD media, MP3 players, -and more, all without requiring sudo, the mount or umount command. Just plug -and play. Properly set up, Slackware's desktop should be suitable for any -level of Linux experience. - -Slackware uses the 2.6.29.6 kernel bringing you advanced performance -features such as journaling filesystems, SCSI and ATA RAID volume support, -SATA support, Software RAID, LVM (the Logical Volume Manager), and -encrypted filesystems. Kernel support for X DRI (the Direct Rendering -Interface) brings high-speed hardware accelerated 3D graphics to Linux. - -There are two kinds of kernels in Slackware -- the huge kernels, which -contain support for just about every driver in the Linux kernel. These are -primarily intended to be used for installation, but there's no real reason -that you couldn't continue to run them after you have installed. The -other type of kernel is the generic kernel, in which nearly every driver -is built as a module. To use a generic kernel you'll need to build an -initrd to load your filesystem module and possibly your drive controller -or other drivers needed at boot time, configure LILO to load the initrd at -boot, and reinstall LILO. See the docs in /boot after installing for more -information. Slackware's Linux kernels come in both SMP and non-SMP types -now. The SMP kernel supports multiple processors, multi-core CPUs, -HyperThreading, and about every other optimization available. In our own -testing this kernel has proven to be fast, stable, and reliable. We -recommend using the SMP kernel even on single processor machines if it -will run on them. - -From the beginning, Slackware has offered a stable and secure Linux -distribution for UNIX veterans as well as an easy-to-use system for -beginners. Slackware includes everything you'll need to run a powerful -server or workstation. Each Slackware package follows the setup and -installation instructions from its author(s) as closely as possible, -offering you the most stable and easily expandable setup. - -Here are some of the advanced features of Slackware 13.0: - -- Runs the 2.6.29.6 version of the Linux kernel from ftp.kernel.org. - Also included is a kernel patched with Speakup to support speech - synthesizers providing access to Linux for the visually impaired - community. The 2.6.x kernel series has matured into a stable - kernel, and provides reliable performance for your desktop or - your production server. - -- System binaries are linked with the GNU C Library, version 2.9. - This version of glibc also has excellent compatibility with - existing binaries. - -- X11 based on the X.Org Foundation's modular X Window System. - There's been much activity in the X development world, and the - improvements in terms of performance and hardware support are - too numerous to mention them all here. - -- Installs gcc-4.3.3 as the default C, C++, Objective-C, - Fortran-77/95, and Ada 95 compiler. - -- Support for fully encrypted network connections with OpenSSL, - OpenSSH, OpenVPN, and GnuPG. - -- Apache (httpd) 2.2.13 web server with Dynamic Shared Object - support, SSL, and PHP 5.2.10. - -- PCMCIA, CardBus, USB, IEE1394 (FireWire) and ACPI support. This - makes Slackware a great operating system for your laptop. - -- The udev dynamic device management system for Linux 2.6.x. - This locates and configures most hardware automatically as it - is added (or removed) from the system, and creates the access - nodes in /dev. It also loads the kernel modules required by - sound cards and other hardware at boot time. - -- New development tools, including Perl 5.10.0, Python 2.6.2, - Ruby 1.8.7-p174, Subversion 1.6.4, git-1.6.4, mercurial-1.2.1, - graphical tools like Qt designer and KDevelop, and much more. - -- Updated versions of the Slackware package management tools make it - easy to add, remove, upgrade, and make your own Slackware packages. - Package tracking makes it easy to upgrade from Slackware 12.2 to - Slackware 13.0 (see CHANGES_AND_HINTS.TXT). The slackpkg tool can - also help update from an older version of Slackware to a newer one, - and keep your Slackware system up to date. In addition, the - slacktrack utility (in extra/) will help you build and maintain - your own packages. - -- Web browsers galore! Includes KDE's Konqueror 4.2.4, - SeaMonkey 1.1.17 (this is the replacement for the Mozilla - Suite), and the immensely popular Firefox 3.5.2, as well as - the Thunderbird 2.0.0.23 email and news client with advanced - junk mail filtering. - -- The complete K Desktop Environment (KDE) version 4.2.4, including - the KOffice productivity suite, networking tools, GUI development - with KDevelop, multimedia tools (including the amazing Amarok - music player and K3B disc burning software), the Konqueror web - browser and file manager, dozens of games and utilities, - international language support, and more. - -- A collection of GTK+ based applications including pidgin-2.5.9, - gimp-2.6.6, gkrellm-2.3.2, gxine-0.5.903, xchat-2.8.6, xsane-0.996, - and pan-0.133. - -- A repository of extra software packages compiled and ready to run. - This includes the Java(TM) 2 Software Development Kit Standard - Edition, an MPlayer browser plugin, alternate Intel video drivers - for X, and more (see the /extra directory). - -- Many more improved and upgraded packages than we can list here. For - a complete list of core packages in Slackware 13.0, see this file: - - ftp://ftp.slackware.com/pub/slackware/slackware-13.0/PACKAGES.TXT - - -Downloading Slackware 13.0: ---------------------------- - -The full version of Slackware Linux 13.0 is available for download from -the central Slackware FTP sites hosted by our friends at www.cwo.com -and osuosl.org: - - ftp://slackware.osuosl.org/pub/slackware/slackware-13.0/ - ftp://ftp.slackware.com/pub/slackware/slackware-13.0/ - -If the sites are busy, see the list of official mirror sites here: - - http://slackware.com/getslack/ - -We will be setting up BitTorrent downloads for the official ISO images. -Stay tuned to http://slackware.com for the latest updates. - -Instructions for burning the Slackware tree onto install discs may be -found in the isolinux directory. - - -Purchasing Slackware on CD-ROM or DVD: --------------------------------------- - -Or, please consider purchasing the Slackware Linux 13.0 six CD-ROM set -or deluxe dual-sided DVD release directly from Slackware Linux, and -you'll be helping to support the continued development of Slackware Linux! - -The DVD release has the 32-bit x86 Slackware 13.0 release on one side, -and the 64-bit x86_64 Slackware 13.0 release on the other. Both sides -are bootable for easy installation, and includes everything from both -releases of Slackware 13.0, including the complete source code trees. - -The 6 CD-ROM release of Slackware 13.0 is the 32-bit x86 edition. It -includes a bootable first CD-ROM for easy installation, and everything -from the Slackware 13.0 32-bit x86 release is contained on 6 discs -labeled for easy reference. - -The Slackware 13.0 x86 6 CD-ROM set is $49.95 plus shipping, or choose -the Slackware 13.0 x86/x86_64 dual-sided DVD (also $49.95 plus shipping). - -Slackware Linux is also available by subscription. When we release a new -version of Slackware (which is normally once or twice a year) we ship it -to you and bill your credit card for a reduced subscription price -($32.99 for the CD-ROM set, or $39.95 for the DVD) plus shipping. - -For shipping options, see the Slackware store website. Before ordering -express shipping, you may wish to check that we have the product in stock. -We make releases to the net at the same time as disc production begins, -so there is a lag between the online release and the shipping of media. -But, even if you download now you can still buy the official media later. -You'll feel good, be helping the project, and have a great decorative -item perfect for any computer room shelf. :-) - - -Ordering Information: ---------------------- - - You can order online at the Slackware Linux store: - http://store.slackware.com - - Other Slackware items like t-shirts, caps, pins, and stickers - can also be found here. These will help you find and identify - yourself to your fellow Slackware users. :-) - - Order inquiries (including questions about becoming a Slackware - reseller) may be directed to this address: - info@slackware.com - - -Have fun! :^) I hope you find Slackware to be useful, and thanks -very much for your support of this project over the years. - ---- -Patrick J. Volkerding <volkerdi@slackware.com> - -Visit us on the web at: http://slackware.com - diff --git a/ANNOUNCE.13_1 b/ANNOUNCE.13_1 new file mode 100644 index 000000000..b64686582 --- /dev/null +++ b/ANNOUNCE.13_1 @@ -0,0 +1,212 @@ + + Yes, it's that time again! After many months of development and +careful testing, we are proud to announce the release of Slackware +version 13.1! + + We are sure you'll enjoy the many improvements. We've done our best +to bring the latest technology to Slackware while still maintaining the +stability and security that you have come to expect. Slackware is well +known for its simplicity and the fact that we try to bring software to +you in the condition that the authors intended. + + Slackware 13.1 brings many updates and enhancements, among which +you'll find two of the most advanced desktop environments available +today: Xfce 4.6.1, a fast and lightweight but visually appealing and +easy to use desktop environment, and KDE 4.4.3, a recent stable release +of the new 4.4.x series of the award-winning KDE desktop environment. +We continue to make use of HAL (Hardware Abstraction Layer) and udev, +which allow the system administrator to grant use of various hardware +devices according to users' group membership so that they will be able +to use items such as USB flash sticks, USB cameras that appear like USB +storage, portable hard drives, CD and DVD media, MP3 players, and more, +all without requiring sudo, the mount or umount command. Just plug and +play. Properly set up, Slackware's desktop should be suitable for any +level of Linux experience. New to the desktop framework are ConsoleKit +and PolicyKit. ConsoleKit handles "seats", things like dealing with +devices when switching from one user to another. PolicyKit is a system +for fine-grained access control, allowing a non-root user to run certain +tasks with elevated privilege, but more securely than if the entire task +were simply run as root. + + Slackware uses the 2.6.33.4 kernel bringing you advanced performance +features such as journaling filesystems, SCSI and ATA RAID volume +support, SATA support, Software RAID, LVM (the Logical Volume Manager), +and encrypted filesystems. Kernel support for X DRI (the Direct +Rendering Interface) brings high-speed hardware accelerated 3D graphics +to Linux. + + There are two kinds of kernels in Slackware. First there are the +huge kernels, which contain support for just about every driver in the +Linux kernel. These are primarily intended to be used for installation, +but there's no real reason that you couldn't continue to run them after +you have installed. The other type of kernel is the generic kernel, in +which nearly every driver is built as a module. To use a generic kernel +you'll need to build an initrd to load your filesystem module and +possibly your drive controller or other drivers needed at boot time, +configure LILO to load the initrd at boot, and reinstall LILO. See the +docs in /boot after installing for more information. Slackware's Linux +kernels come in both SMP and non-SMP types now. The SMP kernel supports +multiple processors, multi-core CPUs, HyperThreading, and about every +other optimization available. In our own testing this kernel has proven +to be fast, stable, and reliable. We recommend using the SMP kernel +even on single processor machines if it will run on them. + + +Here are some of the advanced features of Slackware 13.1: + +- Runs the 2.6.33.4 version of the Linux kernel from ftp.kernel.org. + Also included is a kernel patched with Speakup to support speech + synthesizers providing access to Linux for the visually impaired + community. The 2.6.x kernel series has matured into a stable + kernel, and provides reliable performance for your desktop or + your production server. + +- System binaries are linked with the GNU C Library, version 2.11.1. + This version of glibc also has excellent compatibility with + existing binaries. + +- X11 based on the X.Org Foundation's modular X Window System. + There's been much activity in the X development world, and the + improvements in terms of performance and hardware support are + too numerous to mention them all here. + +- Installs gcc-4.4.4 as the default C, C++, Objective-C, + Fortran-77/95, and Ada 95 compiler. + +- Support for fully encrypted network connections with OpenSSL, + OpenSSH, OpenVPN, and GnuPG. + +- Apache (httpd) 2.2.15 web server with Dynamic Shared Object + support, SSL, and PHP 5.2.13. + +- PCMCIA, CardBus, USB, IEE1394 (FireWire) and ACPI support. This + makes Slackware a great operating system for your laptop. + +- The udev dynamic device management system for Linux 2.6.x. + This locates and configures most hardware automatically as it + is added (or removed) from the system, and creates the access + nodes in /dev. It also loads the kernel modules required by + sound cards and other hardware at boot time. + +- New development tools, including Perl 5.10.1, Python 2.6.4, + Ruby 1.9.1-p378, Subversion 1.6.11, git-1.7.1, mercurial-1.5.2, + graphical tools like Qt designer and KDevelop, and much more. + +- Updated versions of the Slackware package management tools make it + easy to add, remove, upgrade, and make your own Slackware packages. + Package tracking makes it easy to upgrade from Slackware 13.0 to + Slackware 13.1 (see CHANGES_AND_HINTS.TXT). The slackpkg tool can + also help update from an older version of Slackware to a newer one, + and keep your Slackware system up to date. In addition, the + slacktrack utility (in extra/) will help you build and maintain + your own packages. + +- Web browsers galore! Includes KDE's Konqueror 4.4.3, + SeaMonkey 2.0.4 (this is the replacement for the Mozilla + Suite), and the immensely popular Firefox 3.6.3, as well as + the Thunderbird 3.0.4 email and news client with advanced + junk mail filtering. + +- The KDE Software Compilation 4.4.3, a complete desktop environment. + This includes the KOffice productivity suite, networking tools, GUI + development with KDevelop, multimedia tools (including the amazing + Amarok music player and K3B disc burning software), the Konqueror web + browser and file manager, dozens of games and utilities, + international language support, and more. + +- A collection of GTK+ based applications including pidgin-2.7.0, + gimp-2.6.8, gkrellm-2.3.4, gxine-0.5.903, xchat-2.8.6, xsane-0.996, + and pan-0.133. + +- A repository of extra software packages compiled and ready to run. + This includes the Java(TM) 2 Software Development Kit Standard + Edition, an MPlayer browser plugin, and more (see the /extra directory). + +- Many more improved and upgraded packages than we can list here. For + a complete list of core packages in Slackware 13.1, see this file: + + ftp://ftp.slackware.com/pub/slackware/slackware-13.1/PACKAGES.TXT + + +Downloading Slackware 13.1: +--------------------------- + + The full version of Slackware Linux 13.1 is available for download +from the central Slackware FTP sites hosted by our friends at +www.cwo.com and osuosl.org: + + ftp://slackware.osuosl.org/pub/slackware/slackware-13.1/ + ftp://ftp.slackware.com/pub/slackware/slackware-13.1/ + +If the sites are busy, see the list of official mirror sites here: + + http://slackware.com/getslack/ + + We will be setting up BitTorrent downloads for the official ISO +images. Stay tuned to http://slackware.com for the latest updates. + + Instructions for burning the Slackware tree onto install discs may +be found in the isolinux directory. + + +Purchasing Slackware on CD-ROM or DVD: +-------------------------------------- + + Or, please consider purchasing the Slackware Linux 13.1 six CD-ROM +set or deluxe dual-sided DVD release directly from Slackware Linux, and +you'll be helping to support the continued development of Slackware +Linux! + + The DVD release has the 32-bit x86 Slackware 13.1 release on one +side, and the 64-bit x86_64 Slackware 13.1 release on the other. Both +sides are bootable for easy installation, and includes everything from +both releases of Slackware 13.1, including the complete source code +trees. + + The 6 CD-ROM release of Slackware 13.1 is the 32-bit x86 edition. +It includes a bootable first CD-ROM for easy installation. The 6 +CD-ROMs are labeled for easy reference. + + + The Slackware 13.1 x86 6 CD-ROM set is $49.95 plus shipping, or +choose the Slackware 13.1 x86/x86_64 dual-sided DVD (also $49.95 plus +shipping). + + + Slackware Linux is also available by subscription. When we release +a new version of Slackware (which is normally once or twice a year) we +ship it to you and bill your credit card for a reduced subscription +price ($32.99 for the CD-ROM set, or $39.95 for the DVD) plus shipping. + + For shipping options, see the Slackware store website. Before +ordering express shipping, you may wish to check that we have the +product in stock. We make releases to the net at the same time as disc +production begins, so there is a lag between the online release and the +shipping of media. But, even if you download now you can still buy the +official media later. You'll feel good, be helping the project, and have +a great decorative item perfect for any computer room shelf. :-) + + +Ordering Information: +--------------------- + + You can order online at the Slackware Linux store: + + http://store.slackware.com + + Other Slackware items like t-shirts, caps, pins, and stickers can +also be found here. These will help you find and identify yourself to +your fellow Slackware users. :-) + + Order inquiries (including questions about becoming a Slackware +reseller) may be directed to this address: info@slackware.com + + +Have fun! :^) I hope you find Slackware to be useful, and thanks +very much for your support of this project over the years. + +--- +Patrick J. Volkerding <volkerdi@slackware.com> + +Visit us on the web at: http://slackware.com + diff --git a/CHANGES_AND_HINTS.TXT b/CHANGES_AND_HINTS.TXT index f4dbb456e..2f980b8f3 100644 --- a/CHANGES_AND_HINTS.TXT +++ b/CHANGES_AND_HINTS.TXT @@ -1,154 +1,150 @@ -This file documents the instructions for upgrading to Slackware 13.0, the
+This file documents the instructions for upgrading to Slackware 13.1, the
packages added, removed, renamed, and/or split during the development cycle
-from Slackware 12.2 through 13.0, and some potential "gotchas" that users
+from Slackware 13.0 through 13.1, and some potential "gotchas" that users
can avoid by arming themselves with a little knowledge.
-*** INSTRUCTIONS FOR UPGRADING FROM 12.2 ***
+*** INSTRUCTIONS FOR UPGRADING FROM 13.0 ***
Follow the instructions detailed in the UPGRADE.TXT located in this
- directory. Note that upgrading from a Slackware version earlier
- than 12.2 is NOT supported at all and will most likely not work.
-
-Also note that upgrading from 12.2 to 13.0 (64bit) is not supported.
-
-
-*** PACKAGE ADDITIONS SINCE 12.2 ***
-
-a/xz
-ap/cupsddk
-ap/dc3dd
-d/swig
-kde/guidance-power-manager
-kde/kaudiocreator
-kde/kdebase-runtime
-kde/kdebase-workspace
-kde/kdepimlibs
-kde/kdeplasma-addons
-kde/kdevelop
-kde/kdevplatform
-kde/konq-plugins
-kde/ktorrent (moved from /extra)
-kde/mplayerthumbs
-kde/skanlite
-l/M2Crypto
-l/PyQt
-l/QScintilla
-l/akonadi
-l/automoc4
-l/babl
-l/boost
-l/chmlib
-l/clucene
-l/djvulibre
-l/eigen2
-l/exiv2
-l/gegl
-l/gmm
-l/ilmbase
-l/iso-codes
-l/jasper
-l/libarchive
-l/libdvdread
-l/libical
-l/libmcrypt
-l/libmsn
-l/libnl
-l/libspectre
-l/libvncserver
-l/libxklavier
-l/libzip
-l/openexr
-l/phonon
-l/pil
-l/pycups
-l/qca-cyrus-sasl
-l/qca-gnupg
-l/qca-ossl
-l/qimageblitz
-l/qtscriptgenerator
-l/raptor
-l/rasqal
-l/redland
-l/seamonkey-solibs
-l/sip
-l/soprano
-l/strigi
-l/taglib-extras
-l/urwid
-n/crda
-n/iw
-n/iwlwifi-5150-ucode
-n/snownews
-x/intel-gpu-tools
-x/scim-input-pad
-x/xcb-util
-x/xorg-server-xephyr
-x/xpyb
-x/xscope
-xap/MPlayer
-xap/electricsheep
-xap/thunar-volman
-xap/xfce4-power-manager
-
-extra/kde3-compat/arts
-extra/kde3-compat/kdelibs3
-extra/kde3-compat/qca-tls1
-extra/kde3-compat/qca1
-extra/kde3-compat/qt3
-extra/xf86-video-intel-alternate/xf86-video-intel-* (several alternate
- versions of the Xorg intel driver just in case the default doesn't work
- properly for you)
-
-
-*** PACKAGE REMOVALS SINCE 12.2 ***
-
-kde/kdeaddons
-kde/knemo
-l/arts
-l/beecrypt
-l/dbus-qt3
-l/qca-tls
-l/svgalib_helper (won't build on 2.6.28+ kernels)
-n/bitchx
-x/liboldX
-x/xf86-input-calcomp
-x/xf86-input-digitaledge
-x/xf86-input-dmc
-x/xf86-input-dynapro
-x/xf86-input-elo2300
-x/xf86-input-jamstudio
-x/xf86-input-magellan
-x/xf86-input-magictouch
-x/xf86-input-microtouch
-x/xf86-input-palmax
-x/xf86-input-spaceorb
-x/xf86-input-summa
-x/xf86-input-tek4957
-x/xf86-input-ur98
-x/xf86-video-cyrix
-x/xf86-video-fbdev
-x/xf86-video-i810 (use xf86-video-intel instead)
-x/xf86-video-imstt
-x/xf86-video-nsc
-x/xf86-video-vga
-x/xf86-video-via (use xf86-video-openchrome instead)
-x/xphelloworld
-x/xrx
-xap/gimp-help-2
+ directory. You will also need to read the "LIBATA SWITCHOVER" section
+ later in this document.
+Note that upgrading from a Slackware version earlier than 13.0 is NOT
+ supported at all and will most likely not work.
-*** OTHER NOTABLE CHANGES AND HINTS ***
-l/dbus moved to a/dbus
+*** PACKAGE ADDITIONS SINCE 13.0 ***
-New system user accounts:
- oprofile (uid=51)
+a/cpufrequtils
+a/usb_modeswitch
+ap/mpg123 (moved from /extra)
+ap/powertop
+kde/kdepim-runtime
+kde/kopete-cryptography
+kde/oxygen-icons
+kde/polkit-kde-1
+kde/polkit-qt-1
+l/ConsoleKit
+l/QScintilla
+l/attica
+l/ebook-tools
+l/eggdbus
+l/fftw
+l/giflib
+l/gst-plugins-good
+l/hunspell
+l/libdiscid
+l/libiodbc
+l/liblastfm
+l/libnotify
+l/libsamplerate
+l/v4l-utils
+l/loudmouth
+l/notify-python
+l/polkit
+l/polkit-gnome
+l/shared-desktop-ontologies
+l/system-config-printer
+l/virtuoso-ose
+n/epic5 (replaces epic4)
+n/iwlwifi-1000-ucode
+n/iwlwifi-6000-ucode
+n/bluez
+n/obex-data-server
+n/obexfs
+n/rt2860-firmware
+n/rt2870-firmware
+x/xf86-input-wacom
+x/xf86-video-nouveau-blacklist
+xap/blueman
+xap/geeqie
+xap/xfce4-notifyd
+/testing/btrfs-progs
+
+
+*** PACKAGE REMOVALS SINCE 13.0 ***
+
+a/device-mapper (part of lvm2 now)
+a/loadlin (mostly unneeded now)
+ap/cupsddk (part of cups now)
+ap/mpg321 (replaced by mpg123)
+l/libgtkhtml (obsolete)
+l/libungif (replaced by giflib)
+n/bluez-libs (part of bluez now)
+n/bluez-utils (part of bluez now)
+n/epic4 (replaced by epic5)
+x/lbxproxy (obsolete)
+x/liblbxutil (obsolete)
+x/proxymngr (obsolete)
+x/xf86-input-citron (does not compile)
+x/xf86-input-elographics (does not compile)
+x/xf86-input-fpit (does not compile)
+x/xf86-input-hyperpen (does not compile)
+x/xf86-input-mutouch (does not compile)
+x/xf86-video-newport (unneeded)
+x/xf86-video-xgixp (at least partially breaks X)
+xap/gqview (replaced with geeqie)
+kde/mplayerthumbs (part of kdemultimedia now)
+extra/mpg123 (moved to AP series)
+
+
+*** LIBATA SWITCHOVER ***
+
+The "old" ide subsystem in the the linux kernel is now deprecated in favor
+ of the newer libata subsystem, and this affects the naming of device nodes
+ for almost all types of disk drives -- hard drives in particular will now
+ have an "sd" named node. The following information should allow you to
+ handle that changeover gracefully.
+
+ 1. Upgrade the kernel and kernel-modules packages normally.
+
+ 2. Edit /etc/fstab to reflect the change from hd* to sd*.
+
+ If you have multiple SATA devices, and especially if you have some of
+ both hd* and sd* devices present already, then you're basically going
+ to be playing a guessing game right now, and you probably want to
+ consider using some of the persistent symlinks in the /dev/disk/by-*/
+ directories instead of raw device nodes -- for example, the links in
+ /dev/disk/by-id/ should always point to the same device, even if its
+ raw device node changes from e.g. sda1 to sdc1 or some such across
+ reboots.
+
+ * If you are using one of the generic kernels (requiring an initrd),
+ then use the sd* name for the root device when creating the image.
+
+ * You will almost surely want to remove the udev rules file for cdrom
+ devices (it will be regenerated on the next boot with correct
+ information reflecting the new libata stuff):
+ # rm -f /etc/udev/rules.d/70-persistent-cd.rules
+
+ * Speaking of optical devices, if you have multiple disk drives and an
+ optical drive using the old ide subsystem, then be aware that the
+ optical drive will get a /dev/sr* name instead of /dev/sd* -- this is
+ relevant because you might see something like this (if your optical
+ drive is currently /dev/hdb):
+
+ Old Name --> New Name
+ /dev/hda /dev/sda
+ /dev/hdb /dev/sr0
+ /dev/hdc /dev/sdb
+
+ 3. Run lilo. Note that you have made no edits at all to it yet, unless
+ you needed to edit it for the new kernel. Specifically, do not make
+ any changes with respect to hd* --> sd*.
+
+ 4. Reboot. At the lilo prompt, press <TAB> and add an append for the
+ real root device (which will no longer be /dev/hd*). For example, if
+ the old root device was /dev/hda1, and it will now be /dev/sda1, and
+ the name of your kernel image is "Linux" then you would do this:
+
+ Linux root=/dev/sda1
+
+ 5. Once the system comes back up, then fix /etc/lilo.conf, run lilo, and
+ reboot again to be sure everything is correct.
-New system group accounts:
- oprofile (gid=51)
- dialout (gid=16)
- netdev (gid=86)
+
+*** OTHER NOTABLE CHANGES AND HINTS ***
The Slackware installer now uses udev to initialize your hardware, including
the network interface card(s). This has positive consequences for network
@@ -168,6 +164,7 @@ The Slackware installer now uses udev to initialize your hardware, including your card. If you do not want to use udev, you must add the parameter
"noudev" to the command line that boots the Slackware installer, and the
original ("old") Slackware hardware configuration scripts will be used.
+ Also note that this is not supported...
Use one of the provided generic kernels for daily use. Do not report
bugs until/unless you have reproduced them using one of the stock
@@ -185,14 +182,14 @@ Use one of the provided generic kernels for daily use. Do not report ATI proprietary drivers) if you use the SMP kernel.
If you decide to use one of the non-SMP kernels, you will need to follow the
- instructions in /extra/linux-2.6.29.6-nosmp-sdk/README.TXT to modify your
+ instructions in /extra/linux-2.6.33.4-nosmp-sdk/README.TXT to modify your
kernel sources for non-SMP usage. Note that this only applies if you are
using the Slackware-provided non-SMP kernel - if you build a custom kernel,
the symlinks at /lib/modules/$(uname -r)/{build,source} will point to the
correct kernel source so long as you don't (re)move it.
As usual, there are changes in udev packaging that need mentioning...
- As with 12.2, the system udev rules now reside in /lib/udev/rules.d/
+ As with 13.0, the system udev rules now reside in /lib/udev/rules.d/
instead of /etc/udev/rules.d/ in older versions. There should never be
a reason to edit anything in /lib/udev/rules.d/, so if you think you have
a case where this is required, either you're wrong or it needs to be
@@ -201,22 +198,12 @@ As usual, there are changes in udev packaging that need mentioning... files in /etc/udev/rules.d/ are still intended to (maybe) be edited as
needed by local system administrators, and as such, the rules for optical
and network devices will still be placed there.
- Also, be sure to have the new dialout group added to your system, or udev
- will kindly remind you in the system logs...
-Due to the upgrade of kde from 3.5.10 to 4.2.4, you will need to move your
- existing $HOME/.kde/ out of the way (either completely remove it or back
- it up somewhere else if you think you might need it again for whatever
- reason); otherwise, you will almost surely experience odd configuration
- problems with kde applications.
-
-If mailto: links don't work properly (or at all) in firefox, you may have
- to remove an existing $HOME/.mozilla/mimeTypes.rdf file and restart Firefox.
-
-If you are unable to access the cups configuration web interface from your
- browser, you may have to blacklist the ipv6 module and reboot. This is
- not an acceptable solution, of course, but it's the only one we have at
- the moment.
+Speaking of udev, pay particular attention to 70-persistent-net.rules and
+ 70-persistent-cd.rules in /etc/udev/rules.d/ -- these two are automatically
+ generated by the system. If you remove, add, and/or replace some hardware
+ (specifically network cards and/or optical drives) in a machine, you will
+ probably need to edit one or both of the rules files mentioned above.
HP multifunction printer/scanners require that your user account be a member
of the "lp" group for hp-toolbox to work properly, and to use the scanner
@@ -224,8 +211,8 @@ HP multifunction printer/scanners require that your user account be a member This is because hplip's udev rules set the device with group "lp" ownership.
HAL is not new anymore, but here are a few notes related to it:
- 1. User accounts with permission to mount removable devices must be in at
- least the "plugdev" group.
+ 1. User accounts with permission to mount removable devices and manipulate
+ bluetooth devices must be in at least the "plugdev" group.
2. User accounts with permission to do power-management tasks, such as
suspend, hibernate, reboot, and shutdown, via HAL methods should be in
the "power" group.
@@ -237,7 +224,7 @@ HAL is not new anymore, but here are a few notes related to it: cdrom/dvd drive includes the "owner" option, you will not be able to
mount it as a normal user.
4. If you find a need for modified fdi files, those should be placed in the
- relevant directories in /etc/hal/ instead of /usr/share/hal/
+ relevant directories in /etc/hal/fdi/ instead of /usr/share/hal/fdi/
If you notice Xfce's Terminal and perhaps some other applications being drawn
very slowly in X, then you should try explicitly disabling the Composite
@@ -247,7 +234,7 @@ If you notice Xfce's Terminal and perhaps some other applications being drawn We've also gotten a report of some other things (such as VirtualBox) that
might benefit from this.
-Speaking of Xorg, the version of Xorg shipped with Slackware 13.0 will not
+Speaking of Xorg, the version of Xorg shipped with Slackware 13.1 will not
(in most cases) require an /etc/X11/xorg.conf file at all. Configuration of
input devices and such is handled by HAL, and the X server autoconfigures
everything else. You can still create an xorg.conf file if you wish, or you
@@ -270,13 +257,29 @@ If you need to use a non-US keyboard layout, then copy the file located at reason.
If you are using input hotplugging via HAL and a synaptics touchpad, then you
- might need to copy /usr/share/hal/fdi/policy/11-x11-synaptics.fdi to
- /etc/hal/fdi/policy/ and edit it to suit your needs. You can also use
- synclient(1) to make changes "on the fly."
-
-If you want to try the new kernel mode setting (KMS), you don't have to
- build a custom kernel; add this to your kernel's lilo stanza:
- append = "i915.modeset=1"
+ might need to copy /usr/share/hal/fdi/policy/10osvendor/11-x11-synaptics.fdi
+ to /etc/hal/fdi/policy/ and edit it to suit your needs. You can also use
+ synclient(1) to make changes "on the fly."
+Also note that any touchpads that include actual buttons as part of the
+ touchpad hardware will not have tap-to-click enabled by default.
+
+In KDE, you can access the "System Settings" menu in Administrator mode by
+ running "kdesu systemsettings" as your normal user.
+
+If you see errors like this related to alsa during boot:
+ Loading ALSA mixer settings: /usr/sbin/alsactl restore
+ Unknown hardware: "HDA-Intel" ...
+ Hardware is initialized using a guess method
+ /usr/sbin/alsactl: set_control:1256: failed to obtain info for control #31
+ /usr/sbin/alsactl: set_control:1256: failed to obtain info for control #32
+ then you will need to remove /etc/asound.state, reboot (so that it is
+ regenerated with correct information), and reset the volume and such.
+
+If you see warnings like this when logging in:
+ configuration error - unknown item 'DIALUPS_CHECK_ENAB' (notify administrator)
+ configuration error - unknown item 'NOLOGIN_STR' (notify administrator)
+ then you need to move/merge /etc/login.defs.new with /etc/login.defs (and
+ also move/merge the other .new files that you have obviously neglected).
If you are using a KVM switch, you might experience problems with the mouse
when switching from one system to another. If so, you probably need to be
@@ -358,16 +361,3 @@ If you have an older machine (with a BIOS released prior to 2001) and it will not power off on shutdown, try adding this to your kernel's lilo stanza:
append = "acpi=force"
-If you have a Dell Optiplex 760 (or perhaps some other machine that has the
- newer ICH10 chipset), and it won't boot, try one of these:
- 1. Update the BIOS image to at least A03
- 2. Turn C-States control off in the BIOS
- 3. Boot with "hpet=disabled"
-
-If your wireless and/or bluetooth radios are not turned on by default after
- booting up, you might need to load the rfkill-input module. If that solves
- the problem for you, edit /etc/rc.d/rc.modules.local or /etc/rc.d/rc.local
- to load the module on boot, or create /etc/modprobe.d/rfkill.conf and put
- the following line in it:
- install rfkill /sbin/modprobe -i rfkill ; /sbin/modprobe -i rfkill-input
-
diff --git a/ChangeLog.txt b/ChangeLog.txt index e7cd15efd..478a419d1 100644 --- a/ChangeLog.txt +++ b/ChangeLog.txt @@ -1,1441 +1,1999 @@ -Wed Aug 26 10:00:38 CDT 2009 -Slackware 13.0 x86_64 is released as stable! Thanks to everyone who -helped make this release possible -- see the RELEASE_NOTES for the -credits. The ISOs are off to the replicator. This time it will be a -6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD. -We're taking pre-orders now at store.slackware.com. Please consider -picking up a copy to help support the project. Once again, thanks to -the entire Slackware community for all the help testing and fixing -things and offering suggestions during this development cycle. -As always, have fun and enjoy! -P. -a/aaa_base-13.0-x86_64-2.txz: Rebuilt. - Updated the initial email to root. -extra/xf86-video-intel-alternate/xf86-video-intel-2.8.1-x86_64-1.txz: - Added. -extra/wicd/wicd-1.6.2.1-x86_64-1.txz: Upgraded. - Thanks to Adam Blackburn of the Wicd team working with us on this, - and to macavity for testing the hidden network changes. +Wed May 19 08:58:23 UTC 2010 +Slackware 13.1 x86_64 stable is released! +Lots of thanks are due -- see the RELEASE_NOTES and the rest of the +ChangeLog for credits. The ISOs are on their way to replication, +a 6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD. +We are taking pre-orders now at store.slackware.com, and offering +a discount if you sign up for a subscription. Consider picking up +a copy to help support the project. Thanks again to the Slackware +community for testing, contributing, and generally holding us to a +high level of quality. :-) +Enjoy! ++--------------------------+ +Wed May 19 02:59:47 UTC 2010 +a/acpid-2.0.5-x86_64-1.txz: Upgraded. +n/slrn-0.9.9p1-x86_64-3.txz: Rebuilt. + Fixed hardcoded spool directory path in slrnpull. Thanks to Andrew. ++--------------------------+ +Tue May 18 22:17:13 UTC 2010 +Slackware 13.1 RC2. Expect a stable release when it's ready. +l/system-config-printer-1.2.2-x86_64-1.txz: Upgraded. +xap/pidgin-2.7.0-x86_64-1.txz: Upgraded. + Upgraded to pidgin-2.7.0 and pidgin-encryption-3.1. + The msn_emoticon_msg function in slp.c in the MSN protocol plugin in + libpurple in Pidgin before 2.7.0 allows remote attackers to cause + a denial of service (application crash) via a custom emoticon in a + malformed SLP message. + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1624 + (* Security fix *) +testing/packages/btrfs-progs-20100518-x86_64-1.txz: Upgraded. ++--------------------------+ +Tue May 18 06:48:06 UTC 2010 +d/mercurial-1.5.2-x86_64-1.txz: Upgraded. + Added hgk extension, bash and zsh completion, and Emacs .el files. + Thanks to Qun-Ying. ++--------------------------+ +Tue May 18 02:41:17 UTC 2010 +kde/kdegraphics-4.4.3-x86_64-2.txz: Rebuilt. + Patched gwenview for libjpeg8 (fixes save after rotate). + Thanks to V'yacheslav Stetskevych. ++--------------------------+ +Mon May 17 23:19:08 UTC 2010 +a/minicom-2.1-x86_64-4.txz: Rebuilt. + Fixed zero length lrz. Thanks to Todd Aiken for the bug report. + Patched to fix compiling against newer glibc. Thanks to alienBOB. +n/epic4-2.8-x86_64-2.txz: Removed. +n/epic5-1.1.2-x86_64-1.txz: Added. +t/tetex-3.0-x86_64-8.txz: Rebuilt. + Fix fmtutil so that it doesn't quit working after an arbitrary date. + Thanks to Markus M. +t/tetex-doc-3.0-x86_64-8.txz: Rebuilt. +--------------------------+ -Tue Aug 25 05:31:05 CDT 2009 -f/linux-howtos-20090805-noarch-1.txz: Upgraded. +Mon May 17 07:54:23 UTC 2010 +a/cups-1.4.3-x86_64-3.txz: Rebuilt. + Merged Till Kamppeter's patch to restore the ability to use usblp with + the USB backend (in addition to the libusb method). This package will + remove any cups.blacklist.usblp.conf from a previous installation. + Thanks to Martin on linuxquestions.org for pointing out the patch. ++--------------------------+ +Mon May 17 04:28:49 UTC 2010 +a/aaa_base-13.1-x86_64-2.txz: Rebuilt. +a/mdadm-2.6.9-x86_64-1.txz: Upgraded. + At this point it's probably best to stick with the 2.6.x branch for + Slackware 13.1. We will switch to the 3.x mdadm branch in the next + devel cycle -- it's going to take some init script changes, new udev + rules, and lots of testing. +n/rt2860-firmware-26-fw-1.txz: Added. +n/rt2870-firmware-22-fw-1.txz: Added. +xap/xfce-4.6.1-x86_64-8.txz: Rebuilt. + Patched Terminal to fix a bug with the preferences dialog. + Thanks to Jesse Allen for pointing out the problem and a patch in git. isolinux/initrd.img: Rebuilt. - Make the CD install disc swap more reliable on slow CD drives. + Upgraded to mdadm-2.6.9. usb-and-pxe-installers/usbboot.img: Rebuilt. - Make the CD install disc swap more reliable on slow CD drives. -+--------------------------+ -Mon Aug 24 23:44:38 CDT 2009 -a/kbd-1.15-x86_64-3.txz: Rebuilt. Fixed the default font in unicode_start. - Thanks to Conraid and Dugan Chen. -ap/vim-7.2.245-x86_64-1.txz: Upgraded. -l/boost-1.38.0-x86_64-2.txz: Rebuilt. - Patched wrong BOOST_NO_EXCEPTIONS define placement. - Thanks to Steve from the GNOME SlackBuild project, and Christoph Willing. -n/network-scripts-13.0-noarch-2.txz: Rebuilt. Correct the comments about - DHCP timeout to say that it is 10 seconds. Thanks to Mark Payne. -xap/vim-gvim-7.2.245-x86_64-1.txz: Upgraded. -+--------------------------+ -Mon Aug 24 04:16:26 CDT 2009 -a/infozip-6.0-x86_64-1.txz: Upgraded. - Upgraded to Zip 3.0 and Unzip 6.0. - Thanks to Michal Dorocinski for the notice. -ap/sox-14.3.0-x86_64-1.txz: Upgraded. -n/bluez-utils-3.36-x86_64-7.txz: Rebuilt. - Fixed hardcoded /usr/lib path in rc.bluetooth and register-passkey. - Thanks to Michael Wagner. ++--------------------------+ +Sun May 16 06:00:06 UTC 2010 +a/bash-4.1.007-x86_64-1.txz: Upgraded. +ap/slackpkg-2.81.1-noarch-1.tgz: Upgraded. + Thanks to Piter Punk. +n/fetchmail-6.3.17-x86_64-1.txz: Upgraded. + A crafted header or POP3 UIDL list could cause a memory leak and crash + leading to a denial of service. + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1167 + (* Security fix *) +y/bsd-games-2.13-x86_64-11.txz: Rebuilt. isolinux/initrd.img: Rebuilt. - Fixed bad block checking option for ext* filesystems. - Thanks to Pete Cervasio. usb-and-pxe-installers/usbboot.img: Rebuilt. - Fixed bad block checking option for ext* filesystems. - Thanks to Pete Cervasio. +--------------------------+ -Sun Aug 23 23:17:38 CDT 2009 -a/cryptsetup-1.0.7-x86_64-1.txz: Upgraded. -isolinux/initrd.img: Rebuilt. Upgraded cryptsetup. -usb-and-pxe-installers/usbboot.img: Rebuilt. Upgraded cryptsetup. +Fri May 14 19:37:13 UTC 2010 +Good hello! We will call this update Slackware 13.1 RC1. With this, the + kernel, compiler, and glibc versions are "golden", and everything is + pretty much ready to release. Last call for bug reports... +a/aaa_base-13.1-x86_64-1.txz: Bumped version number to 13.1, and updated + root's initial email. +a/aaa_elflibs-13.1-x86_64-1.txz: Upgraded. +a/coreutils-8.5-x86_64-3.txz: Rebuilt. + Patched /etc/profile.d/coreutils-dircolors.sh to work with ash. + Thanks to Gary Langshaw. +a/cups-1.4.3-x86_64-2.txz: Rebuilt. + Blacklist the kernel usblp module which interferes with CUPS 1.4.x. +a/cxxlibs-6.0.13-x86_64-2.txz: Rebuilt. + Rebuilt from gcc-4.4.4 sources. +a/gawk-3.1.8-x86_64-1.txz: Upgraded. +a/glibc-solibs-2.11.1-x86_64-3.txz: Rebuilt. +a/glibc-zoneinfo-2.11.1-noarch-3.txz: Rebuilt. + Upgraded to tzcode2010j and tzdata2010j. +a/kernel-firmware-2.6.33.4-x86_64-1.txz: Upgraded. +a/kernel-generic-2.6.33.4-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.33.4-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.33.4-x86_64-1.txz: Upgraded. +a/pkgtools-13.1-noarch-1.tgz: Upgraded. + Bumped version number in pkgtool to 13.1. + Changed pkgtool hard drive example from /dev/hda to /dev/sda. + Changed explodepkg usage to not show incorrect tar 'z' flag. + Patched upgradepkg to use /sbin/{install,remove}pkg. Thanks to Endre Hajas. +ap/diffutils-3.0-x86_64-1.txz: Upgraded. +ap/mc-20100509_git-x86_64-1.txz: Upgraded. +ap/vim-7.2.416-x86_64-1.txz: Upgraded. +d/gcc-4.4.4-x86_64-1.txz: Upgraded. +d/gcc-g++-4.4.4-x86_64-1.txz: Upgraded. +d/gcc-gfortran-4.4.4-x86_64-1.txz: Upgraded. +d/gcc-gnat-4.4.4-x86_64-1.txz: Upgraded. +d/gcc-java-4.4.4-x86_64-1.txz: Upgraded. +d/gcc-objc-4.4.4-x86_64-1.txz: Upgraded. +d/kernel-headers-2.6.33.4-x86-1.txz: Upgraded. +d/libtool-2.2.6b-x86_64-2.txz: Rebuilt. + Recompiled to fix references to the previous GCC. Thanks to Max. +k/kernel-source-2.6.33.4-noarch-1.txz: Upgraded. +kde/kdebindings-4.4.3-x86_64-2.txz: Rebuilt. + Enabled libsmokephonon build. +kde/kdenetwork-4.4.3-x86_64-2.txz: Rebuilt. + Patched vulnerabilities in kget where it could be tricked into creating or + overwriting arbitrary files, as well as an issue where a download would + proceed without user authorization after a timeout. + For more information, see: + http://kde.org/info/security/advisory-20100513-1.txt + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1000 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1511 + (* Security fix *) +l/desktop-file-utils-0.16-x86_64-2.txz: Rebuilt. + Quiet down some obnoxious warnings generated by the latest version. + Thanks to Stuart Winter. +l/glibc-2.11.1-x86_64-3.txz: Rebuilt. +l/glibc-i18n-2.11.1-x86_64-3.txz: Rebuilt. +l/glibc-profile-2.11.1-x86_64-3.txz: Rebuilt. +l/libaio-0.3.109-x86_64-1.txz: Upgraded. +l/libraw1394-2.0.5-x86_64-1.txz: Upgraded. +l/libv4l-0.6.1-x86_64-1.txz: Removed. +l/v4l-utils-0.8.0-x86_64-1.txz: Added. + This replaces the libv4l package. +n/iputils-s20100418-x86_64-1.txz: Upgraded. +n/traceroute-2.0.14-x86_64-1.txz: Upgraded. +x/xf86-video-siliconmotion-1.7.4-x86_64-1.txz: Upgraded. +xap/gv-3.6.9-x86_64-1.txz: Upgraded. +xap/pidgin-2.6.6-x86_64-2.txz: Rebuilt. + Removed empty /usr/lib/perl5/ directories. +xap/vim-gvim-7.2.416-x86_64-1.txz: Upgraded. +y/bsd-games-2.13-x86_64-10.txz: Rebuilt. + Patched to fix collisions with glibc's getline(). Thanks to Vincent Batts. + Patched bsd-games-login-fortune.sh to work properly with ash. + Thanks to Gary Langshaw. +extra/bittornado/bittornado-0.3.18-noarch-2.txz: Added. +extra/brltty/brltty-4.2-x86_64-1.txz: Upgraded. +extra/emacspeak/emacspeak-32.0-x86_64-1.txz: Added. +isolinux/initrd.img: Rebuilt. + Fixed Apple USB keyboard support. Thanks to Alan Hicks. + Added missing BCM57* firmware. Thanks to Kees Theunissen. + Scan /dev/sr0 first when looking for CD/DVD, not the old IDE device. +kernels/*: Upgraded. +usb-and-pxe-installers/usbboot.img: Rebuilt. ++--------------------------+ +Sun May 9 03:22:17 UTC 2010 +a/inotify-tools-3.14-x86_64-1.txz: Upgraded. +e/emacs-23.2-x86_64-1.txz: Upgraded. +kde/koffice-2.1.2-x86_64-2.txz: Rebuilt. + Krita needed to be recompiled against the new libkdcraw.so.8. + Thanks to Jurgen Van Ham for the bug report. +l/jre-6u20-x86_64-1.txz: Upgraded. + Upgraded to Java(TM) 2 Platform Standard Edition Runtime Environment + Version 6.0 update 20. +extra/jdk-6/jdk-6u20-x86_64-1.txz: Upgraded. + Upgraded to Java(TM) 2 Platform Standard Edition Development Kit + Version 6.0 update 20. ++--------------------------+ +Sat May 8 06:45:05 UTC 2010 +a/mkinitrd-1.4.5-x86_64-2.txz: Rebuilt. + Fixed a bug in the init script. Thanks to bonaire. +l/libpng-1.4.2-x86_64-1.txz: Upgraded. +l/pcre-8.02-x86_64-1.txz: Upgraded. +l/polkit-gnome-0.96-x86_64-1.txz: Upgraded. +--------------------------+ -Sun Aug 23 16:53:59 CDT 2009 +Thu May 6 21:02:02 UTC 2010 +Hi folks! We have some pretty big changes today, with an update to the latest +KDE SC 4.4.3, and the addition of support for ConsoleKit and PolicyKit which +have been enhanced to use shadow authentication. Thanks to Andrew Psaltis for +doing some great work on polkit-1, and to Robby Workman for spending months +following the sometimes random developments coming from the CK/PK camp. :-) +Thanks to Eric Hameleers for leading the KDE 4.4.x Slackware development and +handling the out-of-tree testing through http://alien.slackbook.org/blog/. +And with that, we're calling this Slackware 13.1 BETA1. A stable release +should be just around the corner... +ap/mysql-5.1.46-x86_64-2.txz: Rebuilt. + Added some headers that are needed to compile external database engines. + Thanks to Heinz Wiesinger. +kde/guidance-power-manager-4.4.0-x86_64-1.txz: Upgraded. +kde/k3b-1.91.0-x86_64-3.txz: Upgraded. +kde/kaudiocreator-r1118889-x86_64-1.txz: Upgraded. +kde/kdeaccessibility-4.4.3-x86_64-1.txz: Upgraded. +kde/kdeadmin-4.4.3-x86_64-1.txz: Upgraded. +kde/kdeartwork-4.4.3-x86_64-1.txz: Upgraded. +kde/kdebase-4.4.3-x86_64-1.txz: Upgraded. +kde/kdebase-runtime-4.4.3-x86_64-1.txz: Upgraded. +kde/kdebase-workspace-4.4.3-x86_64-1.txz: Upgraded. +kde/kdebindings-4.4.3-x86_64-1.txz: Upgraded. +kde/kdeedu-4.4.3-x86_64-1.txz: Upgraded. +kde/kdegames-4.4.3-x86_64-1.txz: Upgraded. +kde/kdegraphics-4.4.3-x86_64-1.txz: Upgraded. +kde/kdelibs-4.4.3-x86_64-1.txz: Upgraded. +kde/kdelibs-experimental-4.3.5-x86_64-1.txz: Removed. +kde/kdemultimedia-4.4.3-x86_64-1.txz: Upgraded. +kde/kdenetwork-4.4.3-x86_64-1.txz: Upgraded. +kde/kdepim-4.4.3-x86_64-1.txz: Upgraded. +kde/kdepim-runtime-4.4.3-x86_64-1.txz: Upgraded. +kde/kdepimlibs-4.4.3-x86_64-1.txz: Upgraded. +kde/kdeplasma-addons-4.4.3-x86_64-1.txz: Upgraded. +kde/kdesdk-4.4.3-x86_64-1.txz: Upgraded. +kde/kdetoys-4.4.3-x86_64-1.txz: Upgraded. +kde/kdeutils-4.4.3-x86_64-1.txz: Upgraded. +kde/kdevelop-4.0.0-x86_64-1.txz: Upgraded. +kde/kdevplatform-1.0.0-x86_64-1.txz: Upgraded. +kde/kdewebdev-4.4.3-x86_64-1.txz: Upgraded. +kde/konq-plugins-4.4.0-x86_64-1.txz: Upgraded. +kde/kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz: Upgraded. +kde/oxygen-icons-4.4.3-x86_64-1.txz: Upgraded. +kde/polkit-kde-1-r1120537-x86_64-1.txz: Added. +kde/polkit-qt-1-r1118744-x86_64-1.txz: Added. +kde/skanlite-0.4_kde4.4.0-x86_64-1.txz: Upgraded. +l/ConsoleKit-20100129-x86_64-1.txz: Added. +l/PyQt-4.7.3-x86_64-1.txz: Upgraded. +l/QScintilla-2.4.3-x86_64-1.txz: Upgraded. +l/akonadi-1.3.1-x86_64-1.txz: Upgraded. +l/attica-0.1.3-x86_64-1.txz: Added. +l/boost-1.42.0-x86_64-1.txz: Upgraded. +l/ebook-tools-0.1.1-x86_64-2.txz: Added. +l/eggdbus-0.6-x86_64-1.txz: Added. +l/hunspell-1.2.9-x86_64-1.txz: Added. +l/libdiscid-0.2.2-x86_64-1.txz: Added. +l/libiodbc-3.52.7-x86_64-2.txz: Added. +l/libmsn-4.1-x86_64-1.txz: Upgraded. +l/libspectre-0.2.5-x86_64-1.txz: Upgraded. +l/phonon-4.4.1-x86_64-1.txz: Upgraded. +l/polkit-1_14bdfd8-x86_64-1.txz: Added. +l/polkit-gnome-0.95-x86_64-1.txz: Added. +l/qt-4.6.2_2d3d3e5-x86_64-1.txz: Upgraded. +l/rasqal-0.9.19-x86_64-1.txz: Upgraded. +l/redland-1.0.10-x86_64-1.txz: Upgraded. +l/shared-desktop-ontologies-0.3-x86_64-1.txz: Added. +l/sip-4.10.2-x86_64-1.txz: Upgraded. +l/soprano-2.4.3-x86_64-1.txz: Upgraded. +l/system-config-printer-1.2.1-x86_64-1.txz: Added. +l/virtuoso-ose-6.1.1-x86_64-1.txz: Added. +x/xdg-utils-1.0.2-noarch-4.txz: Upgraded. + Upgraded to 20100506 cvs snapshot. +x/xterm-258-x86_64-1.txz: Upgraded. +xap/xfce-4.6.1-x86_64-7.txz: Rebuilt. + In xinitrc.xfce, launch xfce4-session with ck-launch-session. +testing/packages/amarok-2.3.0.90-x86_64-1.txz: Added. ++--------------------------+ +Wed May 5 07:17:07 UTC 2010 +a/lvm2-2.02.64-x86_64-1.txz: Upgraded. + Fixed dangling .so symlinks. Thanks to oneforall for the bug report. +ap/powertop-1.11-x86_64-1.txz: Added. +n/libgcrypt-1.4.5-x86_64-2.txz: Rebuilt. + Moved shared library to /lib{,64} for cryptsetup. +n/libgpg-error-1.7-x86_64-2.txz: Rebuilt. + Moved shared library to /lib{,64} for cryptsetup. +l/libcap-2.19-x86_64-1.txz: Upgraded. +l/libmtp-1.0.1-x86_64-2.txz: Rebuilt. + Restored some missing symlinks. +x/xorg-server-1.7.7-x86_64-1.txz: Upgraded. +x/xorg-server-xephyr-1.7.7-x86_64-1.txz: Upgraded. +x/xorg-server-xnest-1.7.7-x86_64-1.txz: Upgraded. +x/xorg-server-xvfb-1.7.7-x86_64-1.txz: Upgraded. isolinux/initrd.img: Rebuilt. + Fixed the cryptsetup binary, and changed the NFS mount command in the + installer script to work with the new nfs-utils. + Thanks to Robby Workman, Eric Hameleers, Stuart Winter, and Piter Punk. usb-and-pxe-installers/usbboot.img: Rebuilt. +extra/xf86-video-intel-alternate/*: Removed. +--------------------------+ -Sun Aug 23 02:32:16 CDT 2009 -a/etc-13.0-x86_64-2.txz: Rebuilt. Build package with $ARCH, not noarch. - Ensure that groups added through the install script have "root" as - members where appropriate. -l/icon-naming-utils-0.8.90-x86_64-2.txz: Rebuilt. - Build package with $ARCH, not noarch. -n/getmail-4.11.0-x86_64-1.txz: Upgraded. -xap/xgames-0.3-x86_64-2.txz: Rebuilt. - Merged fixes to xlander: - Avoid "warping" spacecraft position after pause for mouse click due to - paused time being added to frame time. - Decrease lateral thrust, but increase initial lateral velocity, to better - match the original gameplay (DEC microVAX, early 1990s). - Don't use unsigned (fix unsigned comparison warning). - Bump patchlevel. - Thanks to Gary Carvell. -Added 2.6.30.5 generic Linux kernel packages in /testing. Release time -is getting close, so we're sticking with the 2.6.29.6 kernels as the main -kernels for Slackware 13.0. Besides, we know of at least one tricky issue -with 2.6.30.x and the LILO bootloader, and the workaround that we know of -likely isn't going to work on BIOSes older than 2001. Be sure to read the -README_FIRST.TXT (really!) in the directory with the kernel packages if you -intend to try these. -testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txz: - Added. -testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txz: - Added. -testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txz: - Added. -testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txz: - Added. -testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txz: - Added. +Mon May 3 08:46:55 UTC 2010 +a/aaa_elflibs-13.013-x86_64-5.txz: Rebuilt. +ap/lm_sensors-3.1.2-x86_64-1.txz: Upgraded. +d/clisp-2.48-x86_64-1.txz: Upgraded. + Upgraded to clisp-2.48 and libsigsegv-2.8. +d/cscope-15.7a-x86_64-1.txz: Upgraded. +d/mercurial-1.5.1-x86_64-1.txz: Upgraded. +l/cairo-1.8.8-x86_64-3.txz: Reverted. + Gecko based applications running against cairo-1.8.10 are crashing with a + "RenderBadPicture" error. Research indicates that this may be a Gecko bug + exposed by recent changes to cairo, but in any case the best fix for now + is to go back to 1.8.8. Thanks to Jesse Allen for the heads-up. +n/crda-1.1.1-x86_64-1.txz: Upgraded. +n/ethtool-2.6.33-x86_64-1.txz: Upgraded. +n/fetchmail-6.3.16-x86_64-1.txz: Upgraded. +n/getmail-4.17.0-x86_64-1.txz: Upgraded. +n/ipw2200-fw-3.1-fw-1.txz: Upgraded. +n/iwlwifi-1000-ucode-128.50.3.1-fw-1.txz: Added. +n/iwlwifi-6000-ucode-9.193.4.1-fw-1.txz: Added. +n/mtr-0.75-x86_64-1.txz: Upgraded. +n/ncftp-3.2.4-x86_64-1.txz: Upgraded. +n/nfs-utils-1.2.2-x86_64-1.txz: Upgraded. +n/nmap-5.21-x86_64-1.txz: Upgraded. +n/openvpn-2.1.1-x86_64-1.txz: Upgraded. +n/pssh-2.1.1-noarch-1.txz: Upgraded. +n/snownews-1.5.12-x86_64-1.txz: Upgraded. +n/stunnel-4.33-x86_64-1.txz: Upgraded. +n/tftp-hpa-0.49-x86_64-1.txz: Upgraded. +n/yptools-2.12-x86_64-1.txz: Upgraded. + Upgraded to yp-tools-2.12, ypbind-mt-1.31, and ypserv-2.23. +xap/xscreensaver-5.11-x86_64-1.txz: Upgraded. +extra/partitionmanager/partitionmanager-1.0.2-x86_64-1.txz: Upgraded. ++--------------------------+ +Sun May 2 21:53:27 UTC 2010 +l/pilot-link-0.12.5-x86_64-1.txz: Upgraded. +n/bluez-hcidump-1.42-x86_64-3.txz: Rebuilt. +n/bluez-4.64-x86_64-1.txz: Added. + It's been about a year since we last tried the Bluez 4.x branch, and support + for it has greatly improved since then. Thanks to Robby Workman for getting + all this stuff to play together nicely. +n/bluez-libs-3.36-x86_64-2.txz: Removed. +n/bluez-utils-3.36-x86_64-8.txz: Removed. +n/obex-data-server-0.4.5-x86_64-1.txz: Added. +n/obexfs-0.12-x86_64-1.txz: Added. +n/obexftp-0.23-x86_64-3.txz: Rebuilt. +n/openobex-1.5-x86_64-1.txz: Upgraded. +xap/blueman-1.21-x86_64-1.txz: Added. + This is a graphical configuration manager for Bluetooth. ++--------------------------+ +Sun May 2 01:04:42 UTC 2010 +a/kernel-firmware-2.6.33.3-x86_64-1.txz: Upgraded. +a/kernel-generic-2.6.33.3-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.33.3-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.33.3-x86_64-1.txz: Upgraded. +d/kernel-headers-2.6.33.3-x86-1.txz: Upgraded. +f/linux-howtos-20100501-noarch-1.txz: Upgraded. +k/kernel-source-2.6.33.3-noarch-1.txz: Upgraded. +x/xf86-input-vmmouse-12.6.9-x86_64-2.txz: Rebuilt. + Added --with-udev-rules-dir=none option. +isolinux/initrd.img: Rebuilt. +kernels/*: Upgraded. +usb-and-pxe-installers/usbboot.img: Rebuilt. ++--------------------------+ +Sat May 1 18:27:52 UTC 2010 +a/cryptsetup-1.1.0-x86_64-2.txz: Rebuilt. + Moved /usr/sbin/cryptsetup to /sbin/cryptsetup. +a/dbus-1.2.24-x86_64-2.txz: Rebuilt. + Removed $LOCKFILE creation from rc.messagebus.new. +a/rpm2tgz-1.2.1-x86_64-1.txz: Upgraded. + Thanks to Igor Murzov for the bugfixes and improvements. +--------------------------+ -Sat Aug 22 02:00:23 CDT 2009 -a/aaa_elflibs-13.0-x86_64-2.txz: Rebuilt. Upgraded CUPS libraries. -a/cups-1.3.11-x86_64-1.txz: Upgraded. -ap/ghostscript-8.70-x86_64-1.txz: Upgraded. -ap/gutenprint-5.2.4-x86_64-1.txz: Upgraded. +Fri Apr 30 07:37:25 UTC 2010 +a/coreutils-8.5-x86_64-2.txz: Upgraded. + Thanks to Angelo Brigante, Jr for fixing a long-standing bug + in the csh profile script. +a/cryptsetup-1.1.0-x86_64-1.txz: Upgraded. + Moved the libraries to /lib{,64}, and removed the static binary, + which wasn't working right anyway. +a/dbus-1.2.24-x86_64-1.txz: Upgraded. +a/e2fsprogs-1.41.11-x86_64-1.txz: Upgraded. +a/gawk-3.1.7-x86_64-1.txz: Upgraded. +a/kbd-1.15.2-x86_64-1.txz: Upgraded. +a/lvm2-2.02.63-x86_64-1.txz: Upgraded. +a/sysvinit-scripts-1.2-noarch-32.txz: Upgraded. + Fixed rc.S to use cryptsetup instead of cryptsetup.static. +a/tar-1.23-x86_64-1.tgz: Upgraded. +a/udev-153-x86_64-1.txz: Upgraded. + Thanks to Robby Workman for major updates on udev and friends. +a/usb_modeswitch-1.1.2-x86_64-1.txz: Added. + This is a utility to switch some USB devices out of a "here's the Windows + driver" USB storage mode. +a/usbutils-0.87-x86_64-1.txz: Upgraded. +a/util-linux-ng-2.17.2-x86_64-1.txz: Upgraded. +ap/alsa-utils-1.0.23-x86_64-1.txz: Upgraded. +ap/cdrtools-2.01.01a78-x86_64-1.txz: Upgraded. +ap/diffutils-2.9-x86_64-1.txz: Upgraded. +ap/gphoto2-2.4.9-x86_64-1.txz: Upgraded. +ap/hplip-3.10.2-x86_64-2.txz: Rebuilt. + Recompiled with --enable-hpijs-install. Thanks to R. Andrew Bailey. +ap/mysql-5.1.46-x86_64-1.txz: Upgraded. +ap/pm-utils-1.3.0-x86_64-1.txz: Upgraded. +ap/sqlite-3.6.23.1-x86_64-1.txz: Upgraded. +d/bison-2.4.2-x86_64-1.txz: Upgraded. +d/gdb-7.1-x86_64-1.txz: Upgraded. +d/git-1.7.1-x86_64-1.txz: Upgraded. +d/intltool-0.40.6-x86_64-1.txz: Upgraded. +d/m4-1.4.14-x86_64-1.txz: Upgraded. +d/subversion-1.6.11-x86_64-1.txz: Upgraded. +l/alsa-lib-1.0.23-x86_64-1.txz: Upgraded. +l/atk-1.30.0-x86_64-1.txz: Upgraded. +l/cairo-1.8.10-x86_64-1.txz: Upgraded. +l/dbus-glib-0.86-x86_64-1.txz: Upgraded. +l/dbus-python-0.83.1-x86_64-1.txz: Upgraded. +l/desktop-file-utils-0.16-x86_64-1.txz: Upgraded. +l/glib2-2.22.5-x86_64-1.txz: Upgraded. +l/gnome-icon-theme-2.30.2-x86_64-1.txz: Upgraded. +l/gst-plugins-base-0.10.29-x86_64-1.txz: Upgraded. +l/gst-plugins-good-0.10.22-x86_64-1.txz: Upgraded. +l/gstreamer-0.10.29-x86_64-1.txz: Upgraded. +l/gtk+2-2.18.9-x86_64-1.txz: Upgraded. +l/hicolor-icon-theme-0.12-noarch-1.txz: Upgraded. +l/libgphoto2-2.4.9-x86_64-1.txz: Upgraded. +l/popt-1.7-x86_64-3.txz: Rebuilt. + Library moved for cryptsetup, which might need it before /usr is mounted. +l/shared-mime-info-0.71-x86_64-1.txz: Upgraded. +l/vte-0.24.1-x86_64-1.txz: Upgraded. +n/curl-7.20.1-x86_64-1.txz: Upgraded. +n/dhcpcd-5.2.2-x86_64-1.txz: Upgraded. +n/lftp-4.0.7-x86_64-1.txz: Upgraded. +n/openssh-5.5p1-x86_64-1.txz: Upgraded. +n/whois-5.0.2-x86_64-1.txz: Upgraded. +x/xorg-server-1.7.6-x86_64-2.txz: Rebuilt. + Patched a bug that could cause the X server to crash. +x/xorg-server-xephyr-1.7.6-x86_64-2.txz: Rebuilt. +x/xorg-server-xnest-1.7.6-x86_64-2.txz: Rebuilt. +x/xorg-server-xvfb-1.7.6-x86_64-2.txz: Rebuilt. +xap/sane-1.0.21-x86_64-1.txz: Upgraded. + Upgraded to sane-backends-1.0.21. +extra/wicd/wicd-1.7.0-x86_64-2.txz: Rebuilt. + Added a couple patches recommended by upstream. +--------------------------+ -Thu Aug 20 22:41:16 CDT 2009 -x/xf86-input-evdev-2.2.5-x86_64-1.txz: Upgraded. -xap/mozilla-thunderbird-2.0.0.23-x86_64-1.txz: Upgraded. - This upgrade fixes a security bug. +Tue Apr 27 22:37:30 UTC 2010 +Thanks to Robby Workman for this huge batch of X updates! +ap/radeontool-1.6.1-x86_64-1.txz: Upgraded. +x/compiz-0.8.6-x86_64-1.txz: Upgraded. +x/imake-1.0.3-x86_64-1.txz: Upgraded. +x/libdrm-2.4.20-x86_64-1.txz: Upgraded. +x/libxcb-1.6-x86_64-1.txz: Upgraded. +x/mesa-7.8.1-x86_64-1.txz: Upgraded. +x/util-macros-1.7.0-noarch-1.txz: Upgraded. +x/xdm-1.1.10-x86_64-1.txz: Upgraded. +x/xf86-input-evdev-2.3.3-x86_64-1.txz: Upgraded. +x/xf86-input-vmmouse-12.6.9-x86_64-1.txz: Upgraded. +x/xf86-input-wacom-0.10.5-x86_64-1.txz: Upgraded. +x/xf86-video-ati-6.13.0-x86_64-1.txz: Upgraded. +x/xf86-video-intel-2.11.0-x86_64-1.txz: Upgraded. +x/xf86-video-newport-0.2.3-x86_64-1.txz: Removed. + This driver supports a video chipset used only on MIPS hardware. +x/xf86-video-nouveau-blacklist-noarch-1.txz: Added. + This is NOT the nouveau driver! It installs a file in /etc/modprobe.d/ + to prevent the kernel module from autoloading. We don't want the nouveau + loaded since we do not ship the nouveau driver (yet), and having the + module loaded prevents the nv and binary nVidia drivers from working. +x/xf86-video-xgixp-1.7.99.4-x86_64-1.txz: Removed. + This driver breaks X -configure and running X.Org without a config file. + Besides that, x.x.99.x is not a stable release version. + If anyone actually uses this driver, please let us know. +x/xorg-server-1.7.6-x86_64-1.txz: Upgraded. +x/xorg-server-xephyr-1.7.6-x86_64-1.txz: Upgraded. +x/xorg-server-xnest-1.7.6-x86_64-1.txz: Upgraded. +x/xorg-server-xvfb-1.7.6-x86_64-1.txz: Upgraded. +x/xorg-sgml-doctools-1.4-noarch-1.txz: Upgraded. +x/xterm-257-x86_64-1.txz: Upgraded. ++--------------------------+ +Mon Apr 26 05:15:14 UTC 2010 +a/acpid-2.0.4-x86_64-1.txz: Upgraded. +a/bash-4.1.005-x86_64-1.txz: Upgraded. +a/cups-1.4.3-x86_64-1.txz: Upgraded. +a/mkinitrd-1.4.5-x86_64-1.txz: Upgraded. + Thanks to Eric Hameleers, and thanks to GazL for contributing improvements + that allow unlocking multiple LUKS/LVM volumes at boot. +a/smartmontools-5.39.1-x86_64-1.txz: Upgraded. +ap/ash-0.4.0-x86_64-2.txz: Rebuilt. + Patched to fix a crash backspacing on the command line. + Thanks to Gary Langshaw. +ap/ghostscript-8.71-x86_64-2.txz: Rebuilt. + Patched to fix problems with PDF processing. Thanks to Ken L. +ap/slackpkg-2.81-noarch-2.tgz: Upgraded. + Thanks to Piter Punk. +ap/sysstat-9.0.6.1-x86_64-1.txz: Upgraded. +d/binutils-2.20.51.0.8-x86_64-1.txz: Upgraded. +d/oprofile-0.9.6-x86_64-2.txz: Rebuilt. +d/ruby-1.9.1_p378-x86_64-1.txz: Upgraded. +l/libglade-2.6.4-x86_64-4.txz: Rebuilt. + Restored libglade-2.0.la (generally we would like to see .la files go). +n/irssi-0.8.15-x86_64-1.txz: Upgraded. + From the NEWS file: + - Check if an SSL certificate matches the hostname of the server we are + connecting to. + - Fix crash when checking for fuzzy nick match when not on the channel. + Reported by Aurelien Delaitre (SATE 2009). For more information, see: - http://www.mozilla.org/security/known-vulnerabilities/thunderbird20.html + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1155 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1156 (* Security fix *) -extra/brltty/brltty-4.0-x86_64-1.txz: Added. Braille display support. -+--------------------------+ -Wed Aug 19 16:02:54 CDT 2009 -xap/pidgin-2.5.9-x86_64-1.txz: Upgraded. - This update fixes a bug in Pidgin's MSN protocol implementation can allow - a remote attacker to send a malicious MSN message to a Pidgin user, which - will possibly cause arbitrary code to be executed as that user. - This issue was discovered by Federico Muttis of Core Security Technologies. +n/mcabber-0.10.0-x86_64-1.txz: Upgraded. +n/ntp-4.2.6p1-x86_64-1.txz: Upgraded. +n/samba-3.5.2-x86_64-1.txz: Upgraded. +n/sendmail-8.14.4-x86_64-1.txz: Upgraded. +n/sendmail-cf-8.14.4-noarch-1.txz: Upgraded. +x/xf86-input-synaptics-1.2.2-x86_64-1.txz: Upgraded. + Enabled tap-to-click (thanks to Piter Punk). +xap/audacious-2.3-x86_64-1.txz: Upgraded. + Thanks to Robby Workman. +xap/audacious-plugins-2.3-x86_64-1.txz: Upgraded. + Thanks to Robby Workman. ++--------------------------+ +Tue Apr 20 14:45:24 UTC 2010 +a/kernel-firmware-2.6.33.2-x86_64-1.txz: Upgraded. +a/kernel-generic-2.6.33.2-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.33.2-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.33.2-x86_64-1.txz: Upgraded. +ap/mpg123-1.12.1-x86_64-1.txz: Upgraded. +ap/mysql-5.1.45-x86_64-1.txz: Upgraded. +ap/nano-2.2.4-x86_64-1.txz: Upgraded. +ap/sudo-1.7.2p6-x86_64-1.txz: Upgraded. + This update fixes security issues that may give a user with permission + to run sudoedit the ability to run arbitrary commands. For more information, see: - http://www.coresecurity.com/content/libpurple-arbitrary-write - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2694 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0426 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-1163 + http://www.gratisoft.us/sudo/alerts/sudoedit_escalate.html + http://www.gratisoft.us/sudo/alerts/sudoedit_escalate2.html (* Security fix *) +d/cmake-2.8.1-x86_64-1.txz: Upgraded. +d/kernel-headers-2.6.33.2-x86-1.txz: Upgraded. +d/git-1.7.0.5-x86_64-1.txz: Upgraded. +e/emacs-23.1-x86_64-3.txz: Rebuilt. + Fixed a broken icon and updated to the upstream .desktop file. +kde/amarok-2.3.0-x86_64-1.txz: Upgraded. +kde/kdebase-workspace-4.3.5-x86_64-2.txz: Rebuilt. + Patched a security issue with KDM. + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0436 + (* Security fix *) +kde/koffice-2.1.2-x86_64-1.txz: Upgraded. +kdei/koffice-l10n-*: Upgraded. +k/kernel-source-2.6.33.2-noarch-1.txz: Upgraded. +l/lesstif-0.95.2-x86_64-1.txz: Upgraded. +l/libmtp-1.0.1-x86_64-1.txz: Upgraded. +l/loudmouth-1.4.3-x86_64-1.txz: Added. + This is a Jabber library used by Amarok's mp3tunes service. + Thanks to Eric Hameleers. +l/taglib-1.6.2-x86_64-1.txz: Upgraded. +n/gnutls-2.8.6-x86_64-1.txz: Upgraded. +isolinux/initrd.img: Rebuilt. +kernels/*: Upgraded. +usb-and-pxe-installers/usbboot.img: Rebuilt. +--------------------------+ -Tue Aug 18 18:50:46 CDT 2009 - Patched kernels and kernel packages for Linux 2.6.29.6 to address - a bug in proto_ops structures which could allow a user to use the - kernel sendpage operation to execute arbitrary code in page zero. - This could allow local users to gain escalated privileges. - This flaw was discovered by Tavis Ormandy and Julien Tinnes of the - Google Security Team. +Mon Apr 5 03:06:19 UTC 2010 +kde/k3b-1.91.0-x86_64-1.txz: Upgraded. +l/libjpeg-v8a-x86_64-1.txz: Upgraded. +l/seamonkey-solibs-2.0.4-x86_64-1.txz: Upgraded. +xap/mozilla-firefox-3.6.3-x86_64-1.txz: Upgraded. + This fixes some security issues. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2692 - In addition, these kernels change the CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR - kernel config option value to 4096, which should prevent the execution - of arbitrary code by future NULL dereference bugs that might be found - in the kernel. If you are compiling your own kernel, please check this - option in your .config. If it is set to =0, you may wish to edit it - to 4096 (or some other value > 0) and then reconfigure, or the kernel - will not have default protection against zero page attacks from - userspace. + http://www.mozilla.org/security/known-vulnerabilities/firefox36.html (* Security fix *) -a/kernel-firmware-2.6.29.6-noarch-2.txz: Rebuilt. -a/kernel-generic-2.6.29.6-x86_64-2.txz: Rebuilt. - Patched CVE-2009-2692, changed default vm.mmap_min_addr to 4096. +xap/mozilla-thunderbird-3.0.4-x86_64-1.txz: Upgraded. + This upgrade fixes some more security bugs. + For more information, see: + http://www.mozilla.org/security/known-vulnerabilities/thunderbird30.html (* Security fix *) -a/kernel-huge-2.6.29.6-x86_64-2.txz: Rebuilt. - Patched CVE-2009-2692, changed default vm.mmap_min_addr to 4096. +xap/seamonkey-2.0.4-x86_64-1.txz: Upgraded. + This release fixes some more security vulnerabilities. + For more information, see: + http://www.mozilla.org/security/known-vulnerabilities/seamonkey20.html (* Security fix *) -a/kernel-modules-2.6.29.6-x86_64-2.txz: Rebuilt. -a/pkgtools-13.0-noarch-3.tgz: Rebuilt. - Fixed hardcoded gzip in installpkg --warn. Thanks to Mathieu Bouillaguet. - Fixed upgradepkg to reject invalid extensions. Thanks to Andrew Psaltis. -ap/foomatic-filters-4.0.2-x86_64-1.txz: Upgraded. -d/kernel-headers-2.6.29.6-x86-2.txz: Rebuilt. -k/kernel-source-2.6.29.6-noarch-2.txz: Rebuilt. - Patched CVE-2009-2692, changed default vm.mmap_min_addr to 4096. ++--------------------------+ +Wed Mar 31 18:33:50 UTC 2010 +a/kernel-firmware-2.6.33.1-x86_64-1.txz: Upgraded. +a/kernel-generic-2.6.33.1-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.33.1-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.33.1-x86_64-1.txz: Upgraded. +a/openssl-solibs-0.9.8n-x86_64-1.txz: Upgraded. +ap/mpg123-1.11.0-x86_64-1.txz: Upgraded. +d/kernel-headers-2.6.33.1-x86-1.txz: Upgraded. +l/jre-6u19-x86_64-1.txz: Upgraded. + Upgraded to Java(TM) 2 Platform Standard Edition Runtime Environment + Version 6.0 update 19. +l/sdl-1.2.14-x86_64-2.txz: Rebuilt. + Restored missing .mod support. Thanks to Niels Horn. +k/kernel-source-2.6.33.1-noarch-1.txz: Upgraded. +n/openssl-0.9.8n-x86_64-1.txz: Upgraded. + This OpenSSL update contains some security related bugfixes. + For more information, see the included CHANGES and NEWS files, and: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0433 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0740 + (* Security fix *) +n/php-5.2.13-x86_64-2.txz: Rebuilt. + Patched for libpng-1.4.x. + Thanks to Dan Church for the patch. +n/proftpd-1.3.3-x86_64-2.txz: Rebuilt. + Recompiled against openssl-0.9.8n. +x/libXt-1.0.8-x86_64-1.txz: Upgraded. +x/util-macros-1.6.1-noarch-1.txz: Upgraded. +x/xf86-video-ati-6.12.6-x86_64-1.txz: Upgraded. +x/xf86-video-nv-2.1.17-x86_64-1.txz: Upgraded. +x/xinit-1.2.1-x86_64-1.txz: Upgraded. +x/xinput-1.5.1-x86_64-1.txz: Upgraded. +xap/gkrellm-2.3.4-x86_64-1.txz: Upgraded. +xap/mozilla-firefox-3.6.2-x86_64-1.txz: Upgraded. + Upgraded to firefox-3.6.2. + This fixes some security issues. + For more information, see: + http://www.mozilla.org/security/known-vulnerabilities/firefox36.html (* Security fix *) -l/libzip-0.9-x86_64-2.txz: Rebuilt. Get rid of hardlinked man pages. -n/pinentry-0.7.6-x86_64-1.txz: Upgraded. Thanks to Stuart Winter. -xap/x11-ssh-askpass-1.2.4.1-x86_64-1.txz: Added. - Thanks to Vincent Batts for the build script. +xap/xmms-1.2.11-x86_64-4.txz: Rebuilt. + Added missing icon for the .desktop file. + Added .mod support. +extra/jdk-6/jdk-6u19-x86_64-1.txz: Upgraded. + Upgraded to Java(TM) 2 Platform Standard Edition Development Kit + Version 6.0 update 19. isolinux/initrd.img: Rebuilt. - Patched CVE-2009-2692, changed default vm.mmap_min_addr to 4096. - (* Security fix *) -kernels/*: Rebuilt. - Patched CVE-2009-2692, changed default vm.mmap_min_addr to 4096. +kernels/*: Upgraded. +usb-and-pxe-installers/usbboot.img: Rebuilt. ++--------------------------+ +Tue Mar 16 19:16:29 UTC 2010 +e/emacs-23.1-x86_64-2.txz: Rebuilt. ++--------------------------+ +Tue Mar 16 04:59:28 UTC 2010 +e/emacs-23.1-x86_64-1.txz: Upgraded. ++--------------------------+ +Sat Mar 13 02:08:44 UTC 2010 +a/lvm2-2.02.62-x86_64-1.txz: Upgraded. +a/ntfs-3g-2010.3.6-x86_64-1.txz: Upgraded. +ap/lsof-4.83-x86_64-1.txz: Upgraded. +ap/sqlite-3.6.23-x86_64-1.txz: Upgraded. +d/git-1.7.0.2-x86_64-1.txz: Upgraded. +l/hal-0.5.14-x86_64-2.txz: Rebuilt. +l/parted-2.2-x86_64-1.txz: Upgraded. +n/dhcp-4.1.1-x86_64-2.txz: Rebuilt. + Add PATH setting to /sbin/dhclient-script. +n/dhcpcd-5.2.1-x86_64-1.txz: Upgraded. +n/iproute2-2.6.33-x86_64-1.txz: Upgraded. +n/iptables-1.4.7-x86_64-1.txz: Upgraded. +n/samba-3.5.1-x86_64-1.txz: Upgraded. + This fixes a security flaw present in Samba 3.3.11, 3.4.6, and 3.5.0 + that allows nmbd processes filesystem access when permissions should + have denied it. For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0728 (* Security fix *) -usb-and-pxe-installers/: Rebuilt. - Patched CVE-2009-2692, changed default vm.mmap_min_addr to 4096. +xap/xfce4-power-manager-0.8.5-x86_64-1.txz: Upgraded. ++--------------------------+ +Fri Mar 12 05:57:50 UTC 2010 +a/cpufrequtils-007-x86_64-1.txz: Added. +ap/vim-7.2.394-x86_64-1.txz: Upgraded. + Also updated the runtime syntax files. +l/freetype-2.3.12-x86_64-1.txz: Upgraded. +l/gst-plugins-good-0.10.21-x86_64-1.txz: Upgraded. +l/gst-plugins-base-0.10.28-x86_64-1.txz: Upgraded. +l/gstreamer-0.10.28-x86_64-1.txz: Upgraded. +n/mcabber-0.9.10-x86_64-1.txz: Upgraded. +x/mesa-7.7-x86_64-3.txz: Rebuilt. + Removed --enable-gallium-intel from ./configure. +x/xdm-1.1.9-x86_64-2.txz: Rebuilt. + Added missing /var/lib/xdm directory. +xap/geeqie-1.0-x86_64-1.txz: Added. + This fork of GQview is actively maintained, and seems improved. +xap/gqview-2.1.5-x86_64-2.txz: Removed. +xap/vim-gvim-7.2.394-x86_64-1.txz: Upgraded. +extra/bash-completion/bash-completion-1.1-noarch-3.txz: Rebuilt. + Fixed txz completion for pkgtools. ++--------------------------+ +Wed Mar 10 22:38:18 UTC 2010 +xap/pidgin-2.6.6-x86_64-1.txz: Upgraded. + This fixes a few denial-of-service flaws as well as other bugs. + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0277 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0420 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0423 (* Security fix *) +--------------------------+ -Fri Aug 14 15:12:05 CDT 2009 -a/aaa_elflibs-13.0-x86_64-1.txz: Upgraded. -a/mkinitrd-1.3.4-x86_64-3.txz: Rebuilt. Fixed quoting of "${MODULE_LIST}" -a/usbutils-0.82-x86_64-2.txz: Rebuilt. Updated usb.ids, removed usb.ids.gz. -ap/man-pages-3.22-noarch-2.txz: Rebuilt. Fixed missing part of doinst.sh. -kde/koffice-2.0.2-x86_64-1.txz: Upgraded. -kdei/koffice-l10n-*-2.0.2-noarch-1.txz: - Upgraded to KOffice 2.0.2 l10n packages. -l/jre-6u16-x86_64-1.txz: Upgraded. - Upgraded to Java(TM) 2 Platform Standard Edition Runtime Environment - Version 6.0 update 16. -n/curl-7.19.6-x86_64-1.txz: Upgraded. - This update fixes a security issue where a zero byte embedded in an SSL - or TLS certificate could fool cURL into validating the security of a - connection to a system that the certificate was not issued for. It has - been reported that at least one Certificate Authority allowed such - certificates to be issued. +Tue Mar 9 21:31:21 UTC 2010 +a/openssl-solibs-0.9.8m-x86_64-2.txz: Rebuilt. +n/openssl-0.9.8m-x86_64-2.txz: Rebuilt. + The OpenSSL package has been patched and recompiled to revert a change that + broke decrypting some files encrypted with previous versions of OpenSSL. + This same fix appears in the latest upstream snapshots. ++--------------------------+ +Mon Mar 8 20:49:02 UTC 2010 +ap/cupsddk-1.2.3-x86_64-2.txz: Removed. + The CUPS Driver Development Kit (DDK) is part of the main CUPS package now. +ap/hplip-3.10.2-x86_64-1.txz: Upgraded. +n/httpd-2.2.15-x86_64-1.txz: Upgraded. + This update addresses a few security issues. + mod_ssl: A partial fix for the TLS renegotiation prefix injection attack + by rejecting any client-initiated renegotiations. + mod_proxy_ajp: Respond with HTTP_BAD_REQUEST when the body is not sent + when request headers indicate a request body is incoming; not a case of + HTTP_INTERNAL_SERVER_ERROR. + mod_isapi: Do not unload an isapi .dll module until the request processing + is completed, avoiding orphaned callback pointers. + [This is the most serious flaw, but does not affect Linux systems] For more information, see: - http://curl.haxx.se/docs/security.html - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2417 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3555 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0408 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0425 (* Security fix *) -n/elm-2.5.8-x86_64-3.txz: Rebuilt. Fixed mailermode. -t/transfig-3.2.4-x86_64-2.txz: Reverted. This version is matched to - xfig-3.2.4. -t/xfig-3.2.4-x86_64-4.txz: Reverted. This is due to xfig-3.2.5b not working - correctly. .fig files will load, but making any changes causes xfig to - hang consuming 100% CPU. We couldn't find a fix, and honestly RC2 just - wasn't a good time to upgrade xfig (3.2.4 also required many patches to - work right). Sorry, but we'll look at this again in the next -current. -extra/aspell-word-lists/aspell-nb-0.50.1_0-noarch-4.txz: Added. -extra/jdk-6/jdk-6u16-x86_64-1.txz: Upgraded. - Upgraded to Java(TM) 2 Platform Standard Edition Development Kit - Version 6.0 update 16. -extra/wicd/wicd-1.6.2-x86_64-2.txz: Rebuilt. - Fixed a problem with hidden networks. Thanks to Robby Workman. +n/openssh-5.4p1-x86_64-1.txz: Upgraded. ++--------------------------+ +Sun Mar 7 21:44:07 UTC 2010 +a/kernel-huge-2.6.33-x86_64-2.txz: Rebuilt. + Adjusted the config to improve kernel module compatibility. +l/libarchive-2.8.0-x86_64-1.txz: Upgraded. isolinux/initrd.img: Rebuilt. -usb-and-pxe-installers/: Rebuilt. -+--------------------------+ -Tue Aug 11 01:04:25 CDT 2009 -a/etc-13.0-noarch-1.txz: Upgraded. - Added root to power, netdev, and scanner groups in /etc/group. -a/pciutils-3.1.3-x86_64-1.txz: Upgraded. -a/rpm2tgz-1.1-x86_64-1.txz: Upgraded. Make .tgz with makepkg, not tar. -ap/man-1.6f-x86_64-2.txz: In man.conf, change nroff from using -Tlatin1 to - using -mandoc. Thanks to Ricardo Garcia. -ap/man-pages-3.22-noarch-1.txz: Upgraded. -d/guile-1.8.7-x86_64-1.txz: Upgraded. -kde/kaudiocreator-r1008583-x86_64-1.txz: Upgraded. -kde/kdelibs-4.2.4-x86_64-3.txz: Rebuilt. Patched kdesu to fix NOPASS option. - Thanks to Piter Punk! -l/imlib-1.9.15-x86_64-5.txz: Rebuilt. Fixed doc directory perms. -l/qt-r1008952-x86_64-1.txz: Upgraded. - Fixed symlink to QtDesignerComponents.pc. Thanks to oneforall. -n/httpd-2.2.13-x86_64-1.txz: Upgraded. - This is a bugfix release. It also upgrades the internal versions of apr and - apr-util to address CVE-2009-2412, but Slackware uses the system versions of - these libraries which have already been upgraded. -n/mailx-12.4-x86_64-1.txz: Upgraded. -n/netatalk-2.0.4-x86_64-2.txz: Rebuilt. - Don't install rc.atalk as executable by default. -t/transfig-3.2.5a-x86_64-1.txz: Upgraded. -t/xfig-3.2.5b-x86_64-1.txz: Upgraded. -x/xorg-cf-files-1.0.2-noarch-3.txz: Rebuilt. Fixed LibDir in X11.tmpl. -xap/gnuplot-4.2.5-x86_64-1.txz: Upgraded. -xap/xlockmore-5.28-x86_64-1.txz: Upgraded. -+--------------------------+ -Fri Aug 7 01:26:38 CDT 2009 -d/subversion-1.6.4-x86_64-1.txz: Upgraded. - Fixed heap overflow vulnerability on server and client. +kernels/*: Rebuilt. +usb-and-pxe-installers/usbboot.img: Rebuilt. ++--------------------------+ +Sat Mar 6 06:46:22 UTC 2010 +a/aaa_elflibs-13.013-x86_64-4.txz: Rebuilt. + Updated libcurl.so.4.2.0. +d/git-1.7.0.1-x86_64-1.txz: Upgraded. +l/apr-1.3.9-x86_64-1.txz: Upgraded. +l/apr-util-1.3.9-x86_64-2.txz: Rebuilt. +l/raptor-1.4.21-x86_64-1.txz: Upgraded. +n/alpine-2.00-x86_64-3.txz: Rebuilt. +n/autofs-5.0.5-x86_64-1.txz: Upgraded. +n/curl-7.20.0-x86_64-1.txz: Upgraded. +n/dirmngr-1.0.3-x86_64-2.txz: Rebuilt. +n/gnupg-1.4.10-x86_64-1.txz: Upgraded. +n/gnupg2-2.0.14-x86_64-2.txz: Rebuilt. +n/gpgme-1.2.0-x86_64-1.txz: Upgraded. +n/httpd-2.2.14-x86_64-2.txz: Rebuilt. +n/libassuan-1.0.5-x86_64-1.txz: Upgraded. +n/libgcrypt-1.4.5-x86_64-1.txz: Upgraded. +n/libksba-1.0.7-x86_64-1.txz: Upgraded. +n/php-5.2.13-x86_64-1.txz: Upgraded. +n/pinentry-0.8.0-x86_64-1.txz: Upgraded. +x/mesa-7.7-x86_64-2.txz: Rebuilt. + Recompiled with an upstream fix for a crash in driNewRenderbuffer(). + Thanks to David Houlden for the bug report. +x/xf86-input-penmount-1.4.1-x86_64-1.txz: Upgraded. +x/xf86-video-ati-6.12.5-x86_64-1.txz: Upgraded. +xap/mozilla-thunderbird-3.0.3-x86_64-1.txz: Upgraded. + This upgrade fixes some more security bugs. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2411 - http://subversion.tigris.org/security/CVE-2009-2411-advisory.txt + http://www.mozilla.org/security/known-vulnerabilities/thunderbird30.html (* Security fix *) -l/apr-1.3.8-x86_64-1.txz: Upgraded. - Fix overflow in pools and rmm, where size alignment was taking place. - [Matt Lewis <mattlewis@google.com>, Sander Striker] +extra/bash-completion/bash-completion-1.1-noarch-2.txz: Rebuilt. + Patched to recognize bash-4. ++--------------------------+ +Tue Mar 2 19:07:31 UTC 2010 +a/aaa_elflibs-13.013-x86_64-3.txz: Rebuilt. +a/coreutils-8.4-x86_64-2.txz: Rebuilt. + Use --without-gmp, at least for now. We don't want utilities in /bin + requiring a library in /usr/lib{,64} that may not be available. +l/gtk+2-2.18.7-x86_64-2.txz: Rebuilt. +l/libpng-1.4.1-x86_64-2.txz: Rebuilt. + Now with less rat. +xap/xchat-2.8.6-x86_64-5.txz: Rebuilt. ++--------------------------+ +Mon Mar 1 22:43:53 UTC 2010 +Hey folks, we have a whole bunch of updates! Huge thanks to Robby Workman, +Eric Hameleers, and Piter Punk for all the help. :-) +a/aaa_elflibs-13.013-x86_64-2.txz: Rebuilt. +a/acpid-2.0.2-x86_64-1.txz: Upgraded. +a/bash-4.1.002-x86_64-1.txz: Upgraded. +a/coreutils-8.4-x86_64-1.txz: Upgraded. +a/cups-1.4.2-x86_64-1.txz: Upgraded. + Patched for the new lvm2. Thanks to Piter Punk. +a/cxxlibs-6.0.13-x86_64-1.txz: Upgraded. +a/dbus-1.2.16-x86_64-1.txz: Upgraded. +a/dcron-4.4-x86_64-1.txz: Upgraded. +a/device-mapper-1.02.28-x86_64-1.txz: Removed. + This is now included in lvm2. +a/e2fsprogs-1.41.10-x86_64-1.txz: Upgraded. +a/etc-13.013-x86_64-1.txz: Rebuilt. + Removed root from several groups in /etc/group where the group is only used + for root-owned files anyway. Updated /etc/services. +a/file-5.04-x86_64-1.txz: Upgraded. +a/glibc-solibs-2.11.1-x86_64-2.txz: Rebuilt. +a/glibc-zoneinfo-2.11.1-noarch-2.txz: Rebuilt. + Upgraded to tzcode2010a and tzdata2010b. +a/gzip-1.4-x86_64-1.tgz: Upgraded. + gzip -d could segfault and/or clobber the stack, possibly leading to + arbitrary code execution. This affects x86_64 but not 32-bit systems. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2412 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0001 (* Security fix *) -l/apr-util-1.3.9-x86_64-1.txz: Upgraded. - Fix overflow in rmm, where size alignment was taking place. - [Matt Lewis <mattlewis@google.com>, Sander Striker] +a/kernel-firmware-2.6.33-x86_64-1.txz: Upgraded. +a/kernel-generic-2.6.33-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.33-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.33-x86_64-1.txz: Upgraded. +a/less-436-x86_64-1.txz: Upgraded. +a/lilo-22.8-x86_64-15.txz: Rebuilt. +a/logrotate-3.7.8-x86_64-1.txz: Upgraded. +a/lvm2-2.02.61-x86_64-1.txz: Upgraded. +a/mkinitrd-1.4.3-x86_64-1.txz: Upgraded. +a/module-init-tools-3.11.1-x86_64-1.txz: Upgraded. +a/ntfs-3g-2010.1.16-x86_64-1.txz: Upgraded. +a/openssl-solibs-0.9.8m-x86_64-1.txz: Upgraded. +a/pciutils-3.1.5-x86_64-1.txz: Upgraded. +a/rpm2tgz-1.2-x86_64-1.txz: Upgraded. + Thanks to Vincent Batts for the improvements. +a/sdparm-1.04-x86_64-1.txz: Upgraded. +a/shadow-4.1.4.2-x86_64-3.txz: Rebuilt. + Fixed default user group in /etc/default/useradd (100). +a/sysvinit-scripts-1.2-noarch-31.txz: Rebuilt. + Don't warn about already mounted /proc, or already activated swap. + Look for either tmpfs or devtmpfs when starting rc.udev. +a/udev-151-x86_64-1.txz: Upgraded. +a/usbutils-0.86-x86_64-1.txz: Upgraded. +a/util-linux-ng-2.17.1-x86_64-1.txz: Upgraded. +a/xfsprogs-3.1.1-x86_64-1.txz: Upgraded. +ap/alsa-utils-1.0.21-x86_64-1.txz: Upgraded. +ap/cdrtools-2.01.01a74-x86_64-1.txz: Upgraded. +ap/cupsddk-1.2.3-x86_64-2.txz: Rebuilt. +ap/foomatic-filters-4.0.4-x86_64-1.txz: Upgraded. +ap/ghostscript-8.71-x86_64-1.txz: Upgraded. +ap/gphoto2-2.4.8-x86_64-1.txz: Upgraded. +ap/gutenprint-5.2.4-x86_64-2.txz: Rebuilt. +ap/hplip-3.9.12-x86_64-1.txz: Upgraded. +ap/jed-0.99_19-x86_64-1.txz: Upgraded. +ap/linuxdoc-tools-0.9.66-x86_64-2.txz: Rebuilt. + Patched a problem with gtk-doc-1.13. Thanks to Stuart Winter. +ap/man-pages-3.24-noarch-1.txz: Upgraded. +ap/mc-20100206_git-x86_64-1.txz: Upgraded. +ap/mpg123-1.10.1-x86_64-1.txz: Upgraded. +ap/mysql-5.1.42-x86_64-1.txz: Upgraded. +ap/nano-2.2.3-x86_64-1.txz: Upgraded. +ap/pm-utils-1.2.6.1-x86_64-1.txz: Upgraded. +ap/sox-14.3.0-x86_64-3.txz: Rebuilt. +ap/sqlite-3.6.22-x86_64-1.txz: Upgraded. +ap/xfsdump-3.0.4-x86_64-1.txz: Upgraded. +d/doxygen-1.6.3-x86_64-1.txz: Upgraded. +d/gcc-4.4.3-x86_64-2.txz: Rebuilt. +d/gcc-g++-4.4.3-x86_64-2.txz: Rebuilt. +d/gcc-gfortran-4.4.3-x86_64-2.txz: Rebuilt. +d/gcc-gnat-4.4.3-x86_64-2.txz: Rebuilt. +d/gcc-java-4.4.3-x86_64-2.txz: Rebuilt. +d/gcc-objc-4.4.3-x86_64-2.txz: Rebuilt. +d/git-1.7.0-x86_64-1.txz: Upgraded. +d/guile-1.8.7-x86_64-3.txz: Rebuilt. +d/kernel-headers-2.6.33-x86-1.txz: Upgraded. +d/mercurial-1.4.3-x86_64-1.txz: Upgraded. +d/oprofile-0.9.6-x86_64-1.txz: Upgraded. +d/subversion-1.6.9-x86_64-1.txz: Upgraded. +k/kernel-source-2.6.33-noarch-1.txz: Upgraded. +kde/amarok-2.2.2-x86_64-1.txz: Upgraded. +kde/guidance-power-manager-4.3.3-x86_64-1.txz: Upgraded. +kde/k3b-1.70.0-x86_64-1.txz: Upgraded. +kde/kaudiocreator-r1038308-x86_64-2.txz: Rebuilt. +kde/kdeaccessibility-4.3.5-x86_64-1.txz: Upgraded. +kde/kdeadmin-4.3.5-x86_64-1.txz: Upgraded. +kde/kdeartwork-4.3.5-x86_64-1.txz: Upgraded. +kde/kdebase-4.3.5-x86_64-1.txz: Upgraded. +kde/kdebase-runtime-4.3.5-x86_64-1.txz: Upgraded. +kde/kdebase-workspace-4.3.5-x86_64-1.txz: Upgraded. +kde/kdebindings-4.3.5-x86_64-1.txz: Upgraded. +kde/kdeedu-4.3.5-x86_64-1.txz: Upgraded. +kde/kdegames-4.3.5-x86_64-1.txz: Upgraded. +kde/kdegraphics-4.3.5-x86_64-1.txz: Upgraded. +kde/kdelibs-4.3.5-x86_64-1.txz: Upgraded. +kde/kdelibs-experimental-4.3.5-x86_64-1.txz: Upgraded. +kde/kdemultimedia-4.3.5-x86_64-1.txz: Upgraded. +kde/kdenetwork-4.3.5-x86_64-1.txz: Upgraded. +kde/kdepim-4.3.5-x86_64-1.txz: Upgraded. +kde/kdepim-runtime-4.3.5-x86_64-1.txz: Upgraded. +kde/kdepimlibs-4.3.5-x86_64-1.txz: Upgraded. +kde/kdeplasma-addons-4.3.5-x86_64-1.txz: Upgraded. +kde/kdesdk-4.3.5-x86_64-1.txz: Upgraded. +kde/kdetoys-4.3.5-x86_64-1.txz: Upgraded. +kde/kdeutils-4.3.5-x86_64-1.txz: Upgraded. +kde/kdevelop-3.9.98-x86_64-1.txz: Upgraded. +kde/kdevplatform-0.9.98-x86_64-1.txz: Upgraded. +kde/kdewebdev-4.3.5-x86_64-1.txz: Upgraded. +kde/koffice-2.1.1-x86_64-1.txz: Upgraded. +kde/konq-plugins-4.3.1-x86_64-2.txz: Rebuilt. +kde/kopete-cryptography-1.3.0_kde4.3.3-x86_64-1.txz: Upgraded. +kde/ktorrent-3.3.4-x86_64-1.txz: Upgraded. +kde/oxygen-icons-4.3.5-x86_64-1.txz: Upgraded. +kde/skanlite-0.3_kde4.3.1-x86_64-2.txz: Rebuilt. +kdei/*: Upgraded. +l/PyQt-4.6.2-x86_64-2.txz: Rebuilt. +l/QScintilla-2.4-x86_64-3.txz: Rebuilt. +l/alsa-lib-1.0.22-x86_64-1.txz: Upgraded. +l/cairo-1.8.8-x86_64-2.txz: Rebuilt. + Recompiled against libpng-1.4.x. +l/djvulibre-3.5.22-x86_64-2.txz: Rebuilt. +l/freetype-2.3.11-x86_64-1.txz: Upgraded. +l/fuse-2.8.1-x86_64-1.txz: Upgraded. +l/gd-2.0.35-x86_64-4.txz: Rebuilt. + Recompiled against libpng-1.4.x. +l/gegl-0.1.0-x86_64-2.txz: Rebuilt. +l/giflib-4.1.6-x86_64-1.txz: Added. +l/glib2-2.22.4-x86_64-1.txz: Upgraded. +l/glibc-2.11.1-x86_64-2.txz: Rebuilt. +l/glibc-i18n-2.11.1-x86_64-2.txz: Rebuilt. +l/glibc-profile-2.11.1-x86_64-2.txz: Rebuilt. +l/gmime-2.4.15-x86_64-1.txz: Upgraded. +l/gmp-5.0.1-x86_64-1.txz: Upgraded. +l/gnome-icon-theme-2.28.0-x86_64-1.txz: Upgraded. +l/gst-plugins-base-0.10.26-x86_64-1.txz: Upgraded. +l/gst-plugins-good-0.10.18-x86_64-1.txz: Upgraded. +l/gstreamer-0.10.26-x86_64-1.txz: Upgraded. +l/gtk+2-2.18.7-x86_64-1.txz: Upgraded. +l/hal-0.5.14-x86_64-1.txz: Upgraded. +l/hal-info-20091130-noarch-1.txz: Upgraded. +l/imlib-1.9.15-x86_64-6.txz: Rebuilt. +l/jasper-1.900.1-x86_64-3.txz: Rebuilt. +l/lcms-1.19-x86_64-1.txz: Upgraded. +l/libexif-0.6.19-x86_64-1.txz: Upgraded. +l/libglade-2.6.4-x86_64-3.txz: Rebuilt. + Recompiled against libpng-1.4.x. +l/libgphoto2-2.4.8-x86_64-1.txz: Upgraded. +l/libgsf-1.14.16-x86_64-1.txz: Upgraded. +l/libgtkhtml-2.11.1-x86_64-2.txz: Removed. +l/libjpeg-v8-x86_64-1.txz: Upgraded. + This changes the soname to .so.8. +l/libmng-1.0.10-x86_64-2.txz: Rebuilt. +l/libnotify-0.4.5-x86_64-2.txz: Rebuilt. + Recompiled against libpng-1.4.x. +l/libogg-1.1.4-x86_64-1.txz: Upgraded. +l/libpng-1.4.1-x86_64-1.txz: Upgraded. + Includes libpng-1.2.43 and libpng-1.4.1. +l/librsvg-2.26.0-x86_64-3.txz: Rebuilt. + Recompiled against libpng-1.4.x. +l/libtheora-1.1.1-x86_64-1.txz: Upgraded. +l/libtiff-3.9.2-x86_64-1.txz: Upgraded. +l/libungif-4.1.4-x86_64-4.txz: Removed. + Replaced by giflib. +l/libusb-1.0.6-x86_64-1.txz: Upgraded. + Also added libusb-compat-0.1.3 to the package. +l/libv4l-0.6.1-x86_64-1.txz: Added. +l/libvncserver-0.9.7-x86_64-2.txz: Rebuilt. +l/libvorbis-1.2.3-x86_64-1.txz: Upgraded. +l/libwmf-0.2.8.4-x86_64-5.txz: Rebuilt. + Patched to compile with libpng-1.4.x. +l/libwmf-docs-0.2.8.4-noarch-5.txz: Rebuilt. +l/libwnck-2.28.0-x86_64-1.txz: Upgraded. +l/libxklavier-5.0-x86_64-1.txz: Upgraded. +l/mpfr-2.4.2p03-x86_64-1.txz: Upgraded. +l/netpbm-10.49.02-x86_64-1.txz: Upgraded. +l/notify-python-0.1.1-x86_64-1.txz: Added. +l/pango-1.26.2-x86_64-1.txz: Upgraded. +l/parted-2.1-x86_64-1.txz: Upgraded. +l/pil-1.1.7-x86_64-1.txz: Upgraded. +l/pilot-link-0.12.3-x86_64-11.txz: Rebuilt. + Patched to compile with libpng-1.4.x. +l/poppler-0.12.4-x86_64-1.txz: Upgraded. + Removed Qt3 support. +l/poppler-data-0.4.0-noarch-1.txz: Upgraded. +l/pycairo-1.8.8-x86_64-1.txz: Upgraded. +l/pycups-1.9.48-x86_64-1.txz: Upgraded. +l/pygobject-2.20.0-x86_64-1.txz: Upgraded. +l/pygtk-2.16.0-x86_64-1.txz: Upgraded. +l/qt-4.5.3_063bded-x86_64-4.txz: Rebuilt. + Patched to compile with libpng-1.4.x. +l/qtscriptgenerator-0.1.0-x86_64-2.txz: Rebuilt. +l/sdl-1.2.14-x86_64-1.txz: Upgraded. + Upgraded to SDL-1.2.14, SDL_image-1.2.10, and SDL_mixer-1.2.11. +l/seamonkey-solibs-2.0.3-x86_64-1.txz: Upgraded. +l/slang-2.2.2-x86_64-1.txz: Upgraded. +l/startup-notification-0.10-x86_64-1.txz: Upgraded. +l/strigi-0.7.2-x86_64-1.txz: Upgraded. +l/vte-0.22.5-x86_64-1.txz: Upgraded. +n/bluez-utils-3.36-x86_64-8.txz: Rebuilt. + This will quiet down udev until we figure out if we want bluez4 yet. +n/dhcp-4.1.1-x86_64-1.txz: Upgraded. +n/dhcpcd-5.1.5-x86_64-1.txz: Upgraded. +n/dnsmasq-2.52-x86_64-1.txz: Upgraded. +n/gnupg2-2.0.14-x86_64-1.txz: Upgraded. +n/gnutls-2.8.5-x86_64-2.txz: Rebuilt. +n/iptables-1.4.6-x86_64-1.txz: Upgraded. +n/lftp-4.0.5-x86_64-1.txz: Upgraded. +n/links-2.3pre1-x86_64-1.txz: Upgraded. +n/lynx-2.8.7-x86_64-1.txz: Upgraded. +n/netatalk-2.0.5-x86_64-1.txz: Upgraded. +n/openldap-client-2.4.21-x86_64-1.txz: Upgraded. +n/openssl-0.9.8m-x86_64-1.txz: Upgraded. + This OpenSSL update contains some security related bugfixes. + For more information, see the included CHANGES and NEWS files, and: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2008-1678 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1378 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1377 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1379 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3245 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4355 + (* Security fix *) +n/ppp-2.4.5-x86_64-1.txz: Upgraded. +n/proftpd-1.3.3-x86_64-1.txz: Upgraded. +n/rsync-3.0.7-x86_64-1.txz: Upgraded. +n/samba-3.4.6-x86_64-1.txz: Upgraded. +n/vsftpd-2.2.2-x86_64-1.txz: Upgraded. +n/wget-1.12-x86_64-1.txz: Upgraded. +n/wpa_supplicant-0.6.10-x86_64-1.txz: Upgraded. +t/tetex-3.0-x86_64-7.txz: Rebuilt. +t/tetex-doc-3.0-x86_64-7.txz: Rebuilt. +t/transfig-3.2.4-x86_64-3.txz: Rebuilt. + Patched to compile with libpng-1.4.x. +t/xfig-3.2.4-x86_64-5.txz: Rebuilt. + Patched to compile with libpng-1.4.x. +x/appres-1.0.2-x86_64-1.txz: Upgraded. +x/bdftopcf-1.0.2-x86_64-1.txz: Upgraded. +x/bigreqsproto-1.1.0-noarch-1.txz: Upgraded. +x/bitmap-1.0.4-x86_64-1.txz: Upgraded. +x/compiz-0.8.4-x86_64-1.txz: Upgraded. +x/compositeproto-0.4.1-noarch-1.txz: Upgraded. +x/damageproto-1.2.0-noarch-1.txz: Upgraded. +x/dmxproto-2.3-noarch-1.txz: Upgraded. +x/dri2proto-2.3-x86_64-1.txz: Upgraded. +x/editres-1.0.4-x86_64-1.txz: Upgraded. +x/encodings-1.0.3-noarch-1.txz: Upgraded. +x/evieext-1.1.0-noarch-1.txz: Upgraded. +x/fixesproto-4.1.1-noarch-1.txz: Upgraded. +x/font-adobe-100dpi-1.0.1-noarch-1.txz: Upgraded. +x/font-adobe-75dpi-1.0.1-noarch-1.txz: Upgraded. +x/font-adobe-utopia-100dpi-1.0.2-noarch-1.txz: Upgraded. +x/font-adobe-utopia-75dpi-1.0.2-noarch-1.txz: Upgraded. +x/font-adobe-utopia-type1-1.0.2-noarch-1.txz: Upgraded. +x/font-alias-1.0.2-noarch-1.txz: Upgraded. +x/font-arabic-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-bh-100dpi-1.0.1-noarch-1.txz: Upgraded. +x/font-bh-75dpi-1.0.1-noarch-1.txz: Upgraded. +x/font-bh-lucidatypewriter-100dpi-1.0.1-noarch-1.txz: Upgraded. +x/font-bh-lucidatypewriter-75dpi-1.0.1-noarch-1.txz: Upgraded. +x/font-bh-ttf-1.0.1-noarch-1.txz: Upgraded. +x/font-bh-type1-1.0.1-noarch-1.txz: Upgraded. +x/font-bitstream-100dpi-1.0.1-noarch-1.txz: Upgraded. +x/font-bitstream-75dpi-1.0.1-noarch-1.txz: Upgraded. +x/font-bitstream-speedo-1.0.1-noarch-1.txz: Upgraded. +x/font-bitstream-type1-1.0.1-noarch-1.txz: Upgraded. +x/font-cronyx-cyrillic-1.0.1-noarch-1.txz: Upgraded. +x/font-cursor-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-daewoo-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-dec-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-ibm-type1-1.0.1-noarch-1.txz: Upgraded. +x/font-isas-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-jis-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-micro-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-misc-cyrillic-1.0.1-noarch-1.txz: Upgraded. +x/font-misc-ethiopic-1.0.1-noarch-1.txz: Upgraded. +x/font-misc-meltho-1.0.1-noarch-1.txz: Upgraded. +x/font-misc-misc-1.1.0-noarch-1.txz: Upgraded. +x/font-mutt-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-schumacher-misc-1.1.0-noarch-1.txz: Upgraded. +x/font-screen-cyrillic-1.0.2-noarch-1.txz: Upgraded. +x/font-sony-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-sun-misc-1.0.1-noarch-1.txz: Upgraded. +x/font-util-1.1.1-x86_64-1.txz: Upgraded. +x/font-winitzki-cyrillic-1.0.1-noarch-1.txz: Upgraded. +x/font-xfree86-type1-1.0.2-noarch-1.txz: Upgraded. +x/fontcacheproto-0.1.3-noarch-1.txz: Upgraded. +x/fontconfig-2.8.0-x86_64-1.txz: Upgraded. +x/fontconfig-2.8.0-x86_64-1.txz: Upgraded. +x/fontsproto-2.1.0-noarch-1.txz: Upgraded. +x/glproto-1.4.11-noarch-1.txz: Upgraded. +x/iceauth-1.0.3-x86_64-1.txz: Upgraded. +x/inputproto-2.0-noarch-1.txz: Upgraded. +x/intel-gpu-tools-1.0.2-x86_64-1.txz: Upgraded. +x/kbproto-1.0.4-noarch-1.txz: Upgraded. +x/lbxproxy-1.0.1-x86_64-2.txz: Removed. +x/libICE-1.0.6-x86_64-1.txz: Upgraded. +x/libSM-1.1.1-x86_64-1.txz: Upgraded. +x/libX11-1.3.3-x86_64-1.txz: Upgraded. +x/libXScrnSaver-1.2.0-x86_64-1.txz: Upgraded. +x/libXau-1.0.5-x86_64-1.txz: Upgraded. +x/libXaw-1.0.7-x86_64-1.txz: Upgraded. +x/libXcomposite-0.4.1-x86_64-1.txz: Upgraded. +x/libXcursor-1.1.10-x86_64-1.txz: Upgraded. +x/libXdamage-1.1.2-x86_64-1.txz: Upgraded. +x/libXdmcp-1.0.3-x86_64-1.txz: Upgraded. +x/libXext-1.1-x86_64-1.txz: Upgraded. +x/libXfixes-4.0.4-x86_64-1.txz: Upgraded. +x/libXfont-1.4.1-x86_64-1.txz: Upgraded. +x/libXfontcache-1.0.5-x86_64-1.txz: Upgraded. +x/libXft-2.1.14-x86_64-1.txz: Upgraded. +x/libXi-1.3-x86_64-1.txz: Upgraded. +x/libXinerama-1.1-x86_64-1.txz: Upgraded. +x/libXmu-1.0.5-x86_64-1.txz: Upgraded. +x/libXpm-3.5.8-x86_64-1.txz: Upgraded. +x/libXrender-0.9.5-x86_64-1.txz: Upgraded. +x/libXres-1.0.4-x86_64-1.txz: Upgraded. +x/libXt-1.0.7-x86_64-1.txz: Upgraded. +x/libXtst-1.1.0-x86_64-1.txz: Upgraded. +x/libXv-1.0.5-x86_64-1.txz: Upgraded. +x/libXvMC-1.0.5-x86_64-1.txz: Upgraded. +x/libXxf86dga-1.1.1-x86_64-1.txz: Upgraded. +x/libXxf86misc-1.0.2-x86_64-1.txz: Upgraded. +x/libXxf86vm-1.1.0-x86_64-1.txz: Upgraded. +x/libdmx-1.1.0-x86_64-1.txz: Upgraded. +x/libdrm-2.4.18-x86_64-1.txz: Upgraded. +x/libfontenc-1.0.5-x86_64-1.txz: Upgraded. +x/liblbxutil-1.0.1-x86_64-2.txz: Removed. +x/libpciaccess-0.11.0-x86_64-1.txz: Upgraded. +x/libpthread-stubs-0.3-noarch-1.txz: Upgraded. +x/libxcb-1.5-x86_64-1.txz: Upgraded. +x/libxkbfile-1.0.6-x86_64-1.txz: Upgraded. +x/listres-1.0.2-x86_64-1.txz: Upgraded. +x/luit-1.0.5-x86_64-1.txz: Upgraded. +x/makedepend-1.0.2-x86_64-1.txz: Upgraded. +x/mesa-7.7-x86_64-1.txz: Upgraded. +x/mkcomposecache-1.2.1-x86_64-1.txz: Upgraded. +x/mkfontdir-1.0.5-noarch-1.txz: Upgraded. +x/mkfontscale-1.0.7-x86_64-1.txz: Upgraded. +x/pixman-0.16.6-x86_64-1.txz: Upgraded. +x/proxymngr-1.0.1-x86_64-2.txz: Removed. +x/randrproto-1.3.1-noarch-1.txz: Upgraded. +x/recordproto-1.14-noarch-1.txz: Upgraded. +x/resourceproto-1.1.0-noarch-1.txz: Upgraded. +x/scrnsaverproto-1.2.0-noarch-1.txz: Upgraded. +x/sessreg-1.0.5-x86_64-1.txz: Upgraded. +x/smproxy-1.0.3-x86_64-1.txz: Upgraded. +x/twm-1.0.4-x86_64-3.txz: Rebuilt. +x/util-macros-1.6.0-noarch-1.txz: Upgraded. +x/videoproto-2.3.0-noarch-1.txz: Upgraded. +x/viewres-1.0.2-x86_64-1.txz: Upgraded. +x/x11perf-1.5.1-x86_64-1.txz: Upgraded. +x/xauth-1.0.4-x86_64-1.txz: Upgraded. +x/xbacklight-1.1.1-x86_64-1.txz: Upgraded. +x/xbiff-1.0.2-x86_64-1.txz: Upgraded. +x/xbitmaps-1.1.0-noarch-1.txz: Upgraded. +x/xcalc-1.0.3-x86_64-1.txz: Upgraded. +x/xcb-proto-1.6-noarch-1.txz: Upgraded. +x/xcb-util-0.3.6-x86_64-1.txz: Upgraded. +x/xclipboard-1.1.0-x86_64-1.txz: Upgraded. +x/xclock-1.0.4-x86_64-1.txz: Upgraded. +x/xcmiscproto-1.2.0-noarch-1.txz: Upgraded. +x/xcmsdb-1.0.2-x86_64-1.txz: Upgraded. +x/xcompmgr-1.1.5-x86_64-1.txz: Upgraded. +x/xcursor-themes-1.0.2-noarch-1.txz: Upgraded. +x/xcursorgen-1.0.3-x86_64-1.txz: Upgraded. +x/xdm-1.1.9-x86_64-1.txz: Upgraded. +x/xdpyinfo-1.1.0-x86_64-1.txz: Upgraded. +x/xdriinfo-1.0.3-x86_64-1.txz: Upgraded. +x/xev-1.0.4-x86_64-1.txz: Upgraded. +x/xextproto-7.1.1-noarch-1.txz: Upgraded. +x/xeyes-1.1.0-x86_64-1.txz: Upgraded. +x/xf86-input-acecad-1.4.0-x86_64-1.txz: Upgraded. +x/xf86-input-aiptek-1.3.0-x86_64-1.txz: Upgraded. +x/xf86-input-citron-2.2.2-x86_64-1.txz: Removed. +x/xf86-input-elographics-1.2.3-x86_64-2.txz: Removed. +x/xf86-input-evdev-2.3.2-x86_64-1.txz: Upgraded. +x/xf86-input-fpit-1.3.0-x86_64-1.txz: Removed. +x/xf86-input-hyperpen-1.3.0-x86_64-1.txz: Removed. +x/xf86-input-joystick-1.4.99.2-x86_64-1.txz: Upgraded. +x/xf86-input-keyboard-1.4.0-x86_64-1.txz: Upgraded. +x/xf86-input-mouse-1.5.0-x86_64-1.txz: Upgraded. +x/xf86-input-mutouch-1.2.1-x86_64-2.txz: Removed. +x/xf86-input-penmount-1.4.0-x86_64-2.txz: Rebuilt. +x/xf86-input-synaptics-1.2.1-x86_64-1.txz: Upgraded. +x/xf86-input-vmmouse-12.6.6-x86_64-1.txz: Upgraded. +x/xf86-input-void-1.3.0-x86_64-1.txz: Upgraded. +x/xf86-input-wacom-0.10.4-x86_64-1.txz: Upgraded. +x/xf86-video-apm-1.2.2-x86_64-2.txz: Rebuilt. +x/xf86-video-ark-0.7.2-x86_64-1.txz: Upgraded. +x/xf86-video-ast-0.89.9-x86_64-2.txz: Rebuilt. +x/xf86-video-ati-6.12.4-x86_64-1.txz: Upgraded. +x/xf86-video-chips-1.2.2-x86_64-1.txz: Upgraded. +x/xf86-video-cirrus-1.3.2-x86_64-2.txz: Rebuilt. +x/xf86-video-dummy-0.3.3-x86_64-1.txz: Upgraded. +x/xf86-video-glint-1.2.4-x86_64-2.txz: Rebuilt. +x/xf86-video-i128-1.3.3-x86_64-2.txz: Rebuilt. +x/xf86-video-i740-1.3.2-x86_64-2.txz: Rebuilt. +x/xf86-video-intel-2.10.0-x86_64-1.txz: Upgraded. +x/xf86-video-mach64-6.8.2-x86_64-2.txz: Rebuilt. +x/xf86-video-mga-1.4.11-x86_64-2.txz: Rebuilt. +x/xf86-video-neomagic-1.2.4-x86_64-2.txz: Rebuilt. +x/xf86-video-newport-0.2.3-x86_64-1.txz: Upgraded. +x/xf86-video-nv-2.1.16-x86_64-1.txz: Upgraded. +x/xf86-video-openchrome-0.2.904-x86_64-1.txz: Upgraded. +x/xf86-video-r128-6.8.1-x86_64-2.txz: Rebuilt. +x/xf86-video-radeonhd-1.3.0-x86_64-1.txz: Upgraded. +x/xf86-video-rendition-4.2.3-x86_64-1.txz: Upgraded. +x/xf86-video-s3-0.6.3-x86_64-2.txz: Rebuilt. +x/xf86-video-s3virge-1.10.4-x86_64-2.txz: Rebuilt. +x/xf86-video-savage-2.3.1-x86_64-2.txz: Rebuilt. +x/xf86-video-siliconmotion-1.7.3-x86_64-1.txz: Upgraded. +x/xf86-video-sis-0.10.2-x86_64-2.txz: Rebuilt. +x/xf86-video-sisusb-0.9.3-x86_64-2.txz: Rebuilt. +x/xf86-video-tdfx-1.4.3-x86_64-2.txz: Rebuilt. +x/xf86-video-tga-1.2.1-x86_64-1.txz: Upgraded. +x/xf86-video-trident-1.3.3-x86_64-1.txz: Upgraded. +x/xf86-video-tseng-1.2.3-x86_64-1.txz: Upgraded. +x/xf86-video-v4l-0.2.0-x86_64-3.txz: Rebuilt. +x/xf86-video-vesa-2.3.0-x86_64-2.txz: Rebuilt. +x/xf86-video-vmware-10.16.9-x86_64-2.txz: Rebuilt. +x/xf86-video-voodoo-1.2.3-x86_64-2.txz: Rebuilt. +x/xf86-video-xgi-1.5.1-x86_64-1.txz: Upgraded. +x/xf86-video-xgixp-1.7.99.4-x86_64-1.txz: Upgraded. +x/xf86bigfontproto-1.2.0-noarch-1.txz: Upgraded. +x/xf86dgaproto-2.1-noarch-1.txz: Upgraded. +x/xf86driproto-2.1.0-noarch-1.txz: Upgraded. +x/xf86miscproto-0.9.3-noarch-1.txz: Upgraded. +x/xf86vidmodeproto-2.3-noarch-1.txz: Upgraded. +x/xgamma-1.0.3-x86_64-1.txz: Upgraded. +x/xgc-1.0.2-x86_64-2.txz: Rebuilt. +x/xhost-1.0.3-x86_64-1.txz: Upgraded. +x/xineramaproto-1.2-noarch-1.txz: Upgraded. +x/xinit-1.2.0-x86_64-1.txz: Upgraded. +x/xinput-1.5.0-x86_64-1.txz: Upgraded. +x/xkbcomp-1.1.1-x86_64-1.txz: Upgraded. +x/xkbevd-1.1.0-x86_64-1.txz: Upgraded. +x/xkbprint-1.0.2-x86_64-1.txz: Upgraded. +x/xkbutils-1.0.2-x86_64-1.txz: Upgraded. +x/xkeyboard-config-1.8-noarch-1.txz: Upgraded. +x/xkill-1.0.2-x86_64-1.txz: Upgraded. +x/xlogo-1.0.2-x86_64-1.txz: Upgraded. +x/xlsatoms-1.0.2-x86_64-1.txz: Upgraded. +x/xlsclients-1.0.2-x86_64-1.txz: Upgraded. +x/xmag-1.0.3-x86_64-1.txz: Upgraded. +x/xman-1.1.0-x86_64-1.txz: Upgraded. +x/xmessage-1.0.3-x86_64-1.txz: Upgraded. +x/xmodmap-1.0.4-x86_64-1.txz: Upgraded. +x/xorg-cf-files-1.0.3-noarch-1.txz: Upgraded. +x/xorg-docs-1.5-noarch-1.txz: Upgraded. +x/xorg-server-1.7.5-x86_64-1.txz: Upgraded. +x/xorg-server-xephyr-1.7.5-x86_64-1.txz: Upgraded. +x/xorg-server-xnest-1.7.5-x86_64-1.txz: Upgraded. +x/xorg-server-xvfb-1.7.5-x86_64-1.txz: Upgraded. +x/xorg-sgml-doctools-1.3-noarch-1.txz: Upgraded. +x/xpr-1.0.3-x86_64-1.txz: Upgraded. +x/xprop-1.1.0-x86_64-1.txz: Upgraded. +x/xproto-7.0.16-noarch-1.txz: Upgraded. +x/xproxymanagementprotocol-1.0.3-noarch-1.txz: Upgraded. +x/xpyb-1.2-x86_64-1.txz: Upgraded. +x/xrandr-1.3.2-x86_64-1.txz: Upgraded. +x/xrdb-1.0.6-x86_64-1.txz: Upgraded. +x/xrefresh-1.0.3-x86_64-1.txz: Upgraded. +x/xscope-1.2-x86_64-1.txz: Upgraded. +x/xset-1.1.0-x86_64-1.txz: Upgraded. +x/xsetroot-1.0.3-x86_64-1.txz: Upgraded. +x/xterm-255-x86_64-1.txz: Upgraded. +x/xtrans-1.2.5-noarch-1.txz: Upgraded. +x/xvidtune-1.0.2-x86_64-1.txz: Upgraded. +x/xvinfo-1.1.0-x86_64-1.txz: Upgraded. +x/xwd-1.0.3-x86_64-1.txz: Upgraded. +x/xwininfo-1.0.5-x86_64-1.txz: Upgraded. +x/xwud-1.0.2-x86_64-1.txz: Upgraded. +xap/MPlayer-20100218-x86_64-1.txz: Upgraded. +xap/blackbox-0.70.1-x86_64-3.txz: Upgraded. +xap/electricsheep-20090306-x86_64-3.txz: Rebuilt. +xap/fluxbox-1.1.1-x86_64-2.txz: Rebuilt. + Fixed paths in xinitrc.fluxbox. +xap/gimp-2.6.8-x86_64-2.txz: Rebuilt. + Patched to compile with libpng-1.4.x. +xap/gnuchess-5.07-x86_64-5.txz: Rebuilt. + Upgraded to eboard-1.1.1 and xboard-4.4.2. +xap/gnuplot-4.2.6-x86_64-1.txz: Upgraded. +xap/gucharmap-2.28.2-x86_64-1.txz: Upgraded. +xap/imagemagick-6.5.9_6-x86_64-1.txz: Upgraded. +xap/pan-0.133-x86_64-2.txz: Rebuilt. + Patched to use gmime-2.4.x. +xap/sane-1.0.20-x86_64-3.txz: Rebuilt. +xap/seamonkey-2.0.3-x86_64-1.txz: Upgraded. + This release fixes some more security vulnerabilities. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2412 + http://www.mozilla.org/security/known-vulnerabilities/seamonkey20.html (* Security fix *) -l/qt-r1008078-x86_64-1.txz: Upgraded. - Added some missing symlinks to binaries and pkgconfig files. - Thanks to Heinz Wiesinger for the build script improvements! -n/httpd-2.2.12-x86_64-2.txz: Rebuilt. - Recompiled against the new apr and apr-util. This allows external modules - to be built without having to edit the new apr/apr-util version numbers into - the httpd config files. -+--------------------------+ -Thu Aug 6 00:48:30 CDT 2009 -Hi folks! We're going to call this set of updates RC2. There are still -README files to be handled (that's the nature of documentation, I guess), as -well as some other things remaining on the TODO list, but X seems pretty -stable now, and it seems like a release soon would be in order so that we -can march right back into development territory with -current again soon. :-) -Enjoy, and let us know about any problems you run into! -ap/mysql-5.0.84-x86_64-1.txz: Upgraded. -kde/kdebase-runtime-4.2.4-x86_64-2.txz: Rebuilt. - Applied patchset 969192 to fix improper clipping of text labels under icons - (such as in KMail). Thanks to Andrzej Szelachowski. -l/jre-6u15-x86_64-1.txz: Upgraded. +xap/windowmaker-20060427cvs-x86_64-3.txz: Rebuilt. + Fixed paths in xinitrc.wmaker. Patched to compile with libpng-1.4.x. +xap/xchat-2.8.6-x86_64-4.txz: Rebuilt. +xap/xfce-4.6.1-x86_64-6.txz: Rebuilt. + Upgraded to Terminal-0.4.4, exo-0.3.106, libxfcegui4-4.6.3, + xfce4-dev-tools-4.7.2, xfce4-panel-4.6.3, and xfce4-settings-4.6.4. +xap/xfce4-notifyd-0.1.0-x86_64-1.txz: Added. +xap/xfce4-power-manager-0.8.4.2-x86_64-1.txz: Upgraded. +xap/xine-lib-1.1.17-x86_64-1.txz: Upgraded. +xap/xine-ui-0.99.5-x86_64-3.txz: Rebuilt. + Patched to compile with libpng-1.4.x. +xap/xpaint-2.8.16-x86_64-1.txz: Upgraded. +xap/xpdf-3.02pl4-x86_64-2.txz: Rebuilt. + Moved the icon from the icons to the pixmaps directory, as the icons + directory should only be used for themed icons. + Thanks to mancha for the heads-up. +xap/xsane-0.996-x86_64-2.txz: Rebuilt. +xap/xscreensaver-5.10-x86_64-1.txz: Upgraded. +xap/xv-3.10a-x86_64-6.txz: Rebuilt. + More patches and enhancements via Greg Roelofs. +extra/bash-completion/bash-completion-1.1-noarch-1.txz: Upgraded. +isolinux/initrd.img: Rebuilt. +kernels/*: Upgraded. +testing/packages/bash-4.0.024-x86_64-1.txz: Removed. +usb-and-pxe-installers/usbboot.img: Rebuilt. +usb-and-pxe-installers/usbimg2disk.sh: Upgraded. + Thanks to Eric Hameleers. ++--------------------------+ +Sun Jan 31 19:28:54 UTC 2010 +a/shadow-4.1.4.2-x86_64-2.txz: Rebuilt. + Removed /etc/login.defs that was not supposed to be installed directly. + Thanks to sahko. +ap/mpg123-1.10.0-x86_64-2.txz: Rebuilt. ++--------------------------+ +Sun Jan 31 00:14:48 UTC 2010 +Thanks to Robby Workman for most of the non-kernel updates below! +a/kernel-firmware-2.6.32.7-noarch-1.txz: Upgraded. +a/kernel-generic-2.6.32.7-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.32.7-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.32.7-x86_64-1.txz: Upgraded. +a/shadow-4.1.4.2-x86_64-1.txz: Upgraded. +ap/linuxdoc-tools-0.9.66-x86_64-1.txz: Upgraded. + Thanks to Stuart Winter. +ap/mpg123-1.10.0-x86_64-1.txz: Added. + Moved from /extra, and upgraded to the latest version. +ap/mpg321-0.2.10-x86_64-2.txz: Removed. +d/git-1.6.6.1-x86_64-1.txz: Upgraded. +d/kernel-headers-2.6.32.7-x86-1.txz: Upgraded. +k/kernel-source-2.6.32.7-noarch-1.txz: Upgraded. +l/urwid-0.9.9.1-x86_64-1.txz: Upgraded. +extra/mpg123/mpg123-0.65-x86_64-1.txz: Removed. +isolinux/initrd.img: Rebuilt. +kernels/*: Upgraded. +usb-and-pxe-installers/usbboot.img: Rebuilt. ++--------------------------+ +Mon Jan 25 23:13:23 UTC 2010 +a/eject-2.1.5-x86_64-2.txz: Rebuilt. + Fixed a problem handling spaces within mount points. + Thanks to Andrea Amerini for the bug report. +a/syslinux-3.84-x86_64-2.txz: Rebuilt. + Fixed missing files. +l/seamonkey-solibs-2.0.2-x86_64-2.txz: Rebuilt. +n/rdist-6.1.5-x86_64-2.txz: Rebuilt. + Merged Fedora patches to fix symlink creation by rdistd. + Thanks to Vincent Liggio for the bug report. +xap/seamonkey-2.0.2-x86_64-2.txz: Rebuilt. + Added js.msg "header" needed to compile google-gadgets. + Thanks to Heinz Wiesinger for the bug report. ++--------------------------+ +Sun Jan 24 20:22:46 UTC 2010 +a/aaa_elflibs-13.013-x86_64-1.txz: Rebuilt. + Added libltdl.so.3.1.6. +a/gettext-0.17-x86_64-3.txz: Rebuilt. +a/kernel-firmware-2.6.32.5-noarch-1.txz: Upgraded. +a/kernel-generic-2.6.32.5-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.32.5-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.32.5-x86_64-1.txz: Upgraded. +a/syslinux-3.84-x86_64-1.txz: Upgraded. +ap/gphoto2-2.4.7-x86_64-2.txz: Rebuilt. + Recompiled against libtool-2.2.6b. +ap/rpm-4.8.0-x86_64-1.txz: Upgraded. +ap/sox-14.3.0-x86_64-2.txz: Rebuilt. + Recompiled against libtool-2.2.6b. +d/autoconf-2.65-noarch-1.txz: Upgraded. +d/automake-1.11.1-noarch-1.txz: Upgraded. +d/cmake-2.8.0-x86_64-1.txz: Upgraded. +d/gcc-4.4.3-x86_64-1.txz: Upgraded. +d/gcc-g++-4.4.3-x86_64-1.txz: Upgraded. +d/gcc-gfortran-4.4.3-x86_64-1.txz: Upgraded. +d/gcc-gnat-4.4.3-x86_64-1.txz: Upgraded. +d/gcc-java-4.4.3-x86_64-1.txz: Upgraded. +d/gcc-objc-4.4.3-x86_64-1.txz: Upgraded. +d/gettext-tools-0.17-x86_64-4.txz: Rebuilt. + Recompiled against libgcj.so.10. +d/guile-1.8.7-x86_64-2.txz: Rebuilt. + Recompiled against libtool-2.2.6b. +d/kernel-headers-2.6.32.5-x86-1.txz: Upgraded. +d/libtool-2.2.6b-x86_64-1.txz: Upgraded. +d/nasm-2.07-x86_64-1.txz: Upgraded. +k/kernel-source-2.6.32.5-noarch-1.txz: Upgraded. +l/jre-6u18-x86_64-1.txz: Upgraded. Upgraded to Java(TM) 2 Platform Standard Edition Runtime Environment - Version 6.0 update 15. -l/qt-r1006620-x86_64-1.txz: Upgraded to qt-copy r1006620 from svn. - We know about qt-copy.git and plan to adopt it sometime after the 13.0 - release, but would like to stick to close to the same Qt branch that - KDE 4.2.4 was developed on for now. -n/fetchmail-6.3.11-x86_64-1.txz: Upgraded. - This update fixes an SSL NUL prefix impersonation attack through NULs in a - part of a X.509 certificate's CommonName and subjectAltName fields. + Version 6.0 update 18. +l/libgphoto2-2.4.7-x86_64-2.txz: Rebuilt. + Recompiled against libtool-2.2.6b. +l/libnotify-0.4.5-x86_64-1.txz: Added. +l/phonon-4.3.1-x86_64-3.txz: Rebuilt. + Fixed problems with UTF8 filenames (noted with Amarok). + Thanks to Vincent Batts for tracking down the upstream patches. +l/seamonkey-solibs-2.0.2-x86_64-1.txz: Upgraded. +l/urwid-0.9.9-x86_64-1.txz: Upgraded. +n/dhcpcd-5.1.4-x86_64-1.txz: Upgraded. +n/gnutls-2.8.5-x86_64-1.txz: Upgraded. +n/httpd-2.2.14-x86_64-1.txz: Upgraded. + This fixes a couple of security bugs when using mod_proxy_ftp. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2666 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3094 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3095 (* Security fix *) -n/network-scripts-13.0-noarch-1.txz: Upgraded. Added new options to the - rc.inet1.conf file to adjust debugging level, or to turn off ipv4ll - (zeroconf) IP address assignment. Thanks to Eric Hameleers. -x/glew-1.5.1-x86_64-1.txz: Added. Needed by the Mesa demos. -x/libICE-1.0.5-x86_64-2.txz: Rebuilt. -x/libX11-1.2.2-x86_64-1.txz: Upgraded. -x/libdrm-2.4.12-x86_64-1.txz: Upgraded. -x/mesa-7.5-x86_64-1.txz: Upgraded. -x/pixman-0.15.18-x86_64-1.txz: Upgraded. -x/renderproto-0.11-noarch-1.txz: Upgraded. -x/rstart-1.0.3-x86_64-1.txz: Upgraded. -x/setxkbmap-1.1.0-x86_64-1.txz: Upgraded. -x/xf86-input-evdev-2.2.4-x86_64-1.txz: Upgraded. -x/xf86-input-synaptics-1.1.3-x86_64-1.txz: Upgraded. -x/xf86-video-apm-1.2.2-x86_64-1.txz: Upgraded. -x/xf86-video-ast-0.89.9-x86_64-1.txz: Upgraded. -x/xf86-video-cirrus-1.3.2-x86_64-1.txz: Upgraded. -x/xf86-video-glint-1.2.4-x86_64-1.txz: Upgraded. -x/xf86-video-i128-1.3.3-x86_64-1.txz: Upgraded. -x/xf86-video-i740-1.3.2-x86_64-1.txz: Upgraded. -x/xf86-video-intel-2.8.0-x86_64-1.txz: Upgraded. -x/xf86-video-mach64-6.8.2-x86_64-1.txz: Upgraded. -x/xf86-video-mga-1.4.11-x86_64-1.txz: Upgraded. -x/xf86-video-neomagic-1.2.4-x86_64-1.txz: Upgraded. -x/xf86-video-r128-6.8.1-x86_64-1.txz: Upgraded. -x/xf86-video-s3-0.6.3-x86_64-1.txz: Upgraded. -x/xf86-video-s3virge-1.10.4-x86_64-1.txz: Upgraded. -x/xf86-video-savage-2.3.1-x86_64-1.txz: Upgraded. -x/xf86-video-sis-0.10.2-x86_64-1.txz: Upgraded. -x/xf86-video-sisusb-0.9.3-x86_64-1.txz: Upgraded. -x/xf86-video-tdfx-1.4.3-x86_64-1.txz: Upgraded. -x/xf86-video-vesa-2.2.1-x86_64-1.txz: Upgraded. -x/xf86-video-voodoo-1.2.3-x86_64-1.txz: Upgraded. -x/xfs-1.1.0-x86_64-1.txz: Upgraded. -x/xkbcomp-1.1.0-x86_64-1.txz: Upgraded. -x/xorg-server-1.6.3-x86_64-1.txz: Upgraded. -x/xorg-server-xephyr-1.6.3-x86_64-1.txz: Upgraded. -x/xorg-server-xnest-1.6.3-x86_64-1.txz: Upgraded. -x/xorg-server-xvfb-1.6.3-x86_64-1.txz: Upgraded. -x/xtrans-1.2.4-noarch-1.txz: Upgraded. - Huge thanks to Robby Workman for preparing these X updates and getting - people to help test them! The new libdrm, mesa, xorg-server, and - the new Intel driver seem especially improved. :-) -xap/xfce-4.6.1-x86_64-5.txz: Rebuilt. Upgraded to Terminal-0.4.0 and added - some missing icons. Thanks to Robby Workman. -extra/jdk-6/jdk-6u15-x86_64-1.txz: Upgraded. - Upgraded to Java(TM) 2 Platform Standard Edition Development Kit - Version 6.0 update 15. -extra/xf86-video-intel-alternate/xf86-video-intel-2.7.1-x86_64-2.txz: - Moved from slackware64/x. -+--------------------------+ -Mon Aug 3 14:40:36 CDT 2009 -xap/mozilla-firefox-3.5.2-x86_64-1.txz: Upgraded. - This is thought to be just a regular update, as MFSA 2009-42 and MFSA 2009-43 - say that 3.5 is not vulnerable to those flaws. -+--------------------------+ -Sun Aug 2 16:25:44 CDT 2009 -ap/linuxdoc-tools-0.9.56-x86_64-5.txz: Rebuilt. Added a symlink to - isogrk4.ent that fixes the problems that we mentioned earlier. -d/git-1.6.4-x86_64-1.txz: Upgraded. -n/httpd-2.2.12-x86_64-1.txz: Upgraded. - This update fixes some security issues (from the CHANGES file): - *) SECURITY: CVE-2009-1891 (cve.mitre.org) - Fix a potential Denial-of-Service attack against mod_deflate or other - modules, by forcing the server to consume CPU time in compressing a - large file after a client disconnects. PR 39605. - [Joe Orton, Ruediger Pluem] - *) SECURITY: CVE-2009-1195 (cve.mitre.org) - Prevent the "Includes" Option from being enabled in an .htaccess - file if the AllowOverride restrictions do not permit it. - [Jonathan Peatfield <j.s.peatfield damtp.cam.ac.uk>, Joe Orton, - Ruediger Pluem, Jeff Trawick] - *) SECURITY: CVE-2009-1890 (cve.mitre.org) - Fix a potential Denial-of-Service attack against mod_proxy in a - reverse proxy configuration, where a remote attacker can force a - proxy process to consume CPU time indefinitely. [Nick Kew, Joe Orton] - *) SECURITY: CVE-2009-1191 (cve.mitre.org) - mod_proxy_ajp: Avoid delivering content from a previous request which - failed to send a request body. PR 46949 [Ruediger Pluem] - *) SECURITY: CVE-2009-0023, CVE-2009-1955, CVE-2009-1956 (cve.mitre.org) - The bundled copy of the APR-util library has been updated, fixing three - different security issues which may affect particular configurations - and third-party modules. - These last three CVEs were addressed in Slackware previously with an - update to new system apr and apr-util packages. +n/net-snmp-5.5-x86_64-2.txz: Rebuilt. + It looks like net-snmp has to be compiled twice if the library sonames + are bumped, otherwise the perl module will remain linked against the + old library versions. +n/network-scripts-13.0-noarch-3.txz: Upgraded. + rc.inet1 is now compatible with dhcpcd-5.1.x. +n/php-5.2.12-x86_64-1.txz: Upgraded. + This fixes many bugs, including a few security issues. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1891 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1195 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1890 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1191 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0023 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1955 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1956 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3557 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3558 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4017 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4142 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4143 (* Security fix *) -n/irssi-0.8.14-x86_64-1.txz: Upgraded. -+--------------------------+ -Sat Aug 1 00:51:37 CDT 2009 -a/shadow-4.0.3-x86_64-18.txz: Rebuilt. In adduser, adjusted the search of - /etc/passwd to exclude the NIS inclusion string. - Thanks to Dominik L. Borkowski. -ap/linuxdoc-tools-0.9.56-x86_64-4.txz: Rebuilt. Upgraded a number of - component packages. - We also need some help debugging a problem with this package. - For details please see: - /usr/doc/linuxdoc-tools-0.9.56/Slackware-ChangeLog.txt -ap/slackpkg-2.80.2-noarch-3.tgz: Upgraded. Thanks to Piter Punk. -l/hal-0.5.11-x86_64-6.txz: Rebuilt. Rebuilt with some backported patches - from upstream to fix some bugs. - Patched the 10-keymap.fdi with comments and examples for configuring - keyboard layouts, both with and without input hotplugging. - Important changes to /etc/dbus-1/system.d/hal.conf, so be sure to move - the new config into place. - Thanks to Robby Workman. -l/hal-info-20090716-noarch-1.txz: Upgraded. -+--------------------------+ -Wed Jul 29 23:10:01 CDT 2009 -n/bind-9.4.3_P3-x86_64-1.txz: Upgraded. - This BIND update fixes a security problem where a specially crafted - dynamic update message packet will cause named to exit resulting in - a denial of service. - An active remote exploit is in wide circulation at this time. +xap/mozilla-firefox-3.6-x86_64-1.txz: Upgraded. +xap/mozilla-thunderbird-3.0.1-x86_64-1.txz: Upgraded. + This upgrade fixes some more security bugs. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0696 - https://www.isc.org/node/479 + http://www.mozilla.org/security/known-vulnerabilities/thunderbird30.html (* Security fix *) -+--------------------------+ -Fri Jul 24 19:43:51 CDT 2009 -a/cxxlibs-6.0.10-x86_64-1.txz: Upgraded. Replaced libstdc++.so.6.0.9 with - libstdc++.so.6.0.10, and added libstdc++.so.5.0.7, which is needed by some - commercial software. Thanks to Fred Emmott for the build script help. -ap/dc3dd-6.12.3-x86_64-1.txz: Added. This is a version of dd that has been - patched to include a number of features useful for computer forensics. - Thanks to Barry J. Grundy for the build script. -+--------------------------+ -Sat Jul 18 20:17:35 CDT 2009 -a/pkgtools-13.0-noarch-2.tgz: Rebuilt. Patched installpkg to fix handling - of (some) broken packages. Thanks to Jan Rafaj. -+--------------------------+ -Sat Jul 18 16:04:24 CDT 2009 -x/pixman-0.15.10-x86_64-2.txz: Reverted to pixman-0.15.10. There seem to - be problems with all the newer versions we have tested, for example broken - compositing, or missing icons in the KDE4 tray. -+--------------------------+ -Fri Jul 17 21:05:16 CDT 2009 -a/e2fsprogs-1.41.8-x86_64-1.txz: Upgraded. -a/slocate-3.1-x86_64-3.txz: Rebuilt. Changed the daily updatedb cron job - to use "ionice -c3 nice -n 19". Thanks to Andy Alt. -a/sysvinit-scripts-1.2-noarch-30.txz: Rebuilt. Updated rescan-scsi-bus. -n/getmail-4.9.2-noarch-1.txz: Upgraded. -n/nmap-5.00-x86_64-1.txz: Upgraded. -n/snownews-1.5.11-x86_64-2.txz: Rebuilt. - Linked with ncursesw instead of regular ncurses for unicode support. - Thanks to Gwenhael Pierre Élie. -x/mesa-7.4.4-x86_64-2.txz: Rebuilt. Fixed paths in .pc files. - Thanks to Markus Rinne. -xap/mozilla-firefox-3.5.1-x86_64-2.txz: Rebuilt. - Updated to the slightly different 3.5.x Firefox logo png. -extra/slacktrack/slacktrack-2.06-x86_64-1.txz: Upgraded. +xap/pidgin-2.6.5-x86_64-1.txz: Upgraded. + This fixes a directory traversal vulnerability in Pidgin's MSN protocol + handling that may allow attackers to download arbitrary files. + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-0013 + (* Security fix *) +xap/sane-1.0.20-x86_64-2.txz: Rebuilt. + Recompiled against libtool-2.2.6b. +xap/seamonkey-2.0.2-x86_64-1.txz: Upgraded. +extra/jdk-6/jdk-6u18-x86_64-1.txz: Upgraded. + Upgraded to Java(TM) 2 Platform Standard Edition Development Kit + Version 6.0 update 18. +extra/slacktrack/slacktrack-2.07-x86_64-1.txz: Upgraded. Thanks to Stuart Winter. -extra/xf86-video-intel-alternate/xf86-video-intel-2.7.99.901-x86_64-1.txz: - Added. The .902 driver seems to require KMS, while this one doesn't. -+--------------------------+ -Thu Jul 16 19:25:26 CDT 2009 -x/dri2proto-2.1-x86_64-1.txz: Upgraded. -x/inputproto-1.5.1-noarch-1.txz: Upgraded. -x/libFS-1.0.2-x86_64-1.txz: Upgraded. -x/libXaw-1.0.6-x86_64-1.txz: Upgraded. -x/libXt-1.0.6-x86_64-1.txz: Upgraded. -x/pixman-0.15.16-x86_64-1.txz: Upgraded. -x/util-macros-1.2.2-noarch-1.txz: Upgraded. -x/xf86-video-ati-6.12.2-x86_64-2.txz: Upgraded. -x/xf86-video-cirrus-1.3.1-x86_64-1.txz: Upgraded. -x/xf86-video-dummy-0.3.2-x86_64-1.txz: Upgraded. -x/xf86-video-glint-1.2.3-x86_64-1.txz: Upgraded. -x/xf86-video-i128-1.3.2-x86_64-1.txz: Upgraded. -x/xf86-video-i740-1.3.1-x86_64-1.txz: Upgraded. -x/xf86-video-intel-2.7.1-x86_64-2.txz: Rebuilt. -x/xf86-video-neomagic-1.2.3-x86_64-1.txz: Upgraded. -x/xf86-video-nv-2.1.14-x86_64-1.txz: Upgraded. -x/xf86-video-rendition-4.2.2-x86_64-1.txz: Upgraded. -x/xf86-video-s3-0.6.2-x86_64-1.txz: Upgraded. -x/xf86-video-s3virge-1.10.3-x86_64-1.txz: Upgraded. -x/xf86-video-savage-2.3.0-x86_64-1.txz: Upgraded. -x/xf86-video-siliconmotion-1.7.2-x86_64-1.txz: Upgraded. -x/xf86-video-sisusb-0.9.2-x86_64-1.txz: Upgraded. -x/xf86-video-tdfx-1.4.2-x86_64-1.txz: Upgraded. -x/xf86-video-trident-1.3.2-x86_64-1.txz: Upgraded. -x/xf86-video-tseng-1.2.2-x86_64-1.txz: Upgraded. -x/xf86-video-voodoo-1.2.2-x86_64-1.txz: Upgraded. -x/xorg-server-1.6.2-x86_64-1.txz: Upgraded. -x/xorg-server-xephyr-1.6.2-x86_64-1.txz: Upgraded. -x/xorg-server-xnest-1.6.2-x86_64-1.txz: Upgraded. -x/xorg-server-xvfb-1.6.2-x86_64-1.txz: Upgraded. -Just in case xf86-video-intel-2.7.1 has problems on your machine, perhaps -one of these versions will work better: -extra/xf86-video-intel-alternate/xf86-video-intel-2.5.1-x86_64-1.txz: - Added. -extra/xf86-video-intel-alternate/xf86-video-intel-2.6.3-x86_64-1.txz: - Added. -extra/xf86-video-intel-alternate/xf86-video-intel-2.7.99.902-x86_64-1.txz: - Added. - Thanks to Robby Workman for preparing these X updates. +extra/wicd/wicd-1.7.0-x86_64-1.txz: Upgraded. +isolinux/initrd.img: Rebuilt. +kernels/*: Upgraded. +testing/packages/btrfs-progs-20100120-x86_64-1.txz: Added. +usb-and-pxe-installers/usbboot.img: Rebuilt. +--------------------------+ -Thu Jul 16 13:14:54 CDT 2009 -xap/mozilla-firefox-3.5.1-x86_64-1.txz: Upgraded. - This fixes a vulnerability in Firefox 3.5's Just-in-time (JIT) JavaScript - compiler. For more information, see: - http://blog.mozilla.com/security/2009/07/14/critical-javascript-vulnerability-in-firefox-35/ - (* Security fix *) +Sat Jan 9 01:42:22 UTC 2010 +a/kernel-firmware-2.6.32.3-noarch-1.txz: Upgraded. +a/kernel-generic-2.6.32.3-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.32.3-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.32.3-x86_64-1.txz: Upgraded. +d/kernel-headers-2.6.32.3-x86-1.txz: Upgraded. +k/kernel-source-2.6.32.3-noarch-1.txz: Upgraded. +n/samba-3.4.4-x86_64-1.txz: Upgraded. +xap/mozilla-firefox-3.5.7-x86_64-1.txz: Upgraded. +isolinux/initrd.img: Rebuilt. +kernels/*: Upgraded. +usb-and-pxe-installers/usbboot.img: Rebuilt. +--------------------------+ -Wed Jul 15 20:51:29 CDT 2009 -a/kernel-firmware-2.6.29.6-noarch-1.txz: Upgraded. -a/kernel-generic-2.6.29.6-x86_64-1.txz: Upgraded. -a/kernel-huge-2.6.29.6-x86_64-1.txz: Upgraded. -a/kernel-modules-2.6.29.6-x86_64-1.txz: Upgraded. -a/mkinitrd-1.3.4-x86_64-2.txz: Rebuilt. Added a small patch to mkinitrd to - avoid an error message (harmless, but still) about a missing udevadm. - Thanks to Robby Workman. -a/shadow-4.0.3-x86_64-17.txz: Rebuilt. Added "power" and "netdev" to the - list of suggested groups for desktop users. -a/udev-141-x86_64-3.txz: Rebuilt. Added aic94xx to /etc/modprobe.d/blacklist. - Change config files in /etc/modprobe.d/ to use a .conf suffix in preparation - for newer versions of module-init-tools. - Let the psmouse module load with the default kernel configuration, rather - than forcing proto=imps. If this causes problems with your KVM, uncomment - the line in /etc/modprobe.d/psmouse. -ap/zsh-4.3.10-x86_64-1.txz: Upgraded. - Added support for xz file formats to zsh's completion. - Thanks to Andrew Psaltis for the patch. -d/kernel-headers-2.6.29.6-x86-1.txz: Upgraded. -k/kernel-source-2.6.29.6-noarch-1.txz: Upgraded. -n/dirmngr-1.0.3-x86_64-1.txz: Upgraded. -n/gnupg2-2.0.12-x86_64-1.txz: Upgraded. -n/iwlwifi-4965-ucode-228.61.2.24-fw-1.txz: Upgraded. -n/iwlwifi-5150-ucode-8.24.2.2-fw-1.txz: Added. -n/libksba-1.0.6-x86_64-1.txz: Upgraded. -x/mesa-7.4.4-x86_64-1.txz: Upgraded. (moved from /testing) -extra/bash-completion/bash-completion-20060301-noarch-2.txz: Added. +Mon Jan 4 21:43:02 UTC 2010 + New kernels... and this deserves a mention/warning: the last bits of the + "old" IDE/ATA system have been removed now. Everything should be using + the libata based drivers now, so if you have any drives that are currently + running as /dev/hda, /dev/hdb, etc., when you reboot with these kernels all + drives will be renamed as /dev/sda, /dev/sdb, etc. If you had any /dev/sd* + already, they might get renamed. Adjustments may be required in + /etc/lilo.conf, /etc/fstab, the initrd, and elsewhere. Good luck! +a/glibc-solibs-2.11.1-x86_64-1.txz: Upgraded. +a/glibc-zoneinfo-2.11.1-noarch-1.txz: Upgraded. +a/kernel-firmware-2.6.32.2-noarch-1.txz: Upgraded. +a/kernel-generic-2.6.32.2-x86_64-1.txz: Upgraded. +a/kernel-huge-2.6.32.2-x86_64-1.txz: Upgraded. +a/kernel-modules-2.6.32.2-x86_64-1.txz: Upgraded. +d/gcc-4.4.2-x86_64-1.txz: Moved from /testing. +d/gcc-g++-4.4.2-x86_64-1.txz: Moved from /testing. +d/gcc-gfortran-4.4.2-x86_64-1.txz: Moved from /testing. +d/gcc-gnat-4.4.2-x86_64-1.txz: Moved from /testing. +d/gcc-java-4.4.2-x86_64-1.txz: Moved from /testing. +d/gcc-objc-4.4.2-x86_64-1.txz: Moved from /testing. +d/kernel-headers-2.6.32.2-x86-1.txz: Upgraded. +k/kernel-source-2.6.32.2-noarch-1.txz: Upgraded. +l/glibc-2.11.1-x86_64-1.txz: Upgraded. +l/glibc-i18n-2.11.1-x86_64-1.txz: Upgraded. +l/glibc-profile-2.11.1-x86_64-1.txz: Upgraded. +n/wireless-tools-29-x86_64-6.txz: Rebuilt. + In rc.wireless, look for /sys/class/net/$dev/wireless rather than at the + contents of /proc/net/wireless to determine if an interface is wireless. + In recent kernels, interfaces that are not active will not appear in + /proc/net/wireless. Thanks to Marin Glibic and Piter Punk. isolinux/initrd.img: Rebuilt. -kernels/*: Rebuilt. -usb-and-pxe-installers/: Rebuilt. -+--------------------------+ -Tue Jul 14 18:10:01 CDT 2009 -a/e2fsprogs-1.41.7-x86_64-1.txz: Upgraded. -ap/mc-20090714_git-x86_64-1.txz: Upgraded. -ap/slackpkg-2.80.1-noarch-2.tgz: Upgraded. Thanks to Piter Punk. -l/gnome-icon-theme-2.26.0-x86_64-1.txz: Upgraded. -l/libgsf-1.14.15-x86_64-1.txz: Upgraded. -n/dhcp-3.1.2p1-x86_64-1.txz: Upgraded. - A stack overflow vulnerability was fixed in dhclient that could allow - remote attackers to execute arbitrary commands as root on the system, - or simply terminate the client, by providing an over-long subnet-mask - option. +kernels/*: Upgraded. +usb-and-pxe-installers/usbboot.img: Rebuilt. ++--------------------------+ +Sat Dec 19 00:09:53 UTC 2009 +l/akonadi-1.2.1-x86_64-2.txz: Rebuilt. +l/liblastfm-0.3.0-x86_64-2.txz: Rebuilt. + Make sure that libraries are installed in /usr/lib64/. + Thanks to Heinz Wiesinger for the bug report. +l/seamonkey-solibs-2.0.1-x86_64-1.txz: Upgraded. + Upgraded to seamonkey-2.0.1 shared libraries. +xap/seamonkey-2.0.1-x86_64-1.txz: Upgraded. + Upgraded to seamonkey-2.0.1. + This release fixes some more security vulnerabilities. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0692 + http://www.mozilla.org/security/known-vulnerabilities/seamonkey20.html (* Security fix *) -extra/wicd/wicd-1.6.2-x86_64-1.txz: Upgraded. -+--------------------------+ -Sat Jul 11 18:31:32 CDT 2009 -l/qt-r994599-x86_64-1.txz: Upgraded to qt-copy-r994599. -n/php-5.2.10-x86_64-2.txz: Rebuilt. Installed the pear.php.net.reg and - pecl.php.net.reg files from php-5.2.9, since the ones installed by - php-5.2.10 are broken. Thanks to Mike Peachey for the bug report. -xap/mozilla-firefox-3.5-x86_64-1.txz: Upgraded to mozilla-firefox-3.5. -+--------------------------+ -Wed Jul 1 16:04:35 CDT 2009 -Hi folks -- the TODO isn't entirely empty here, but it's pretty much down -to minor nits, and so we're going to call this release candidate #1 and -(mostly) freeze further updates unless they happen to fix problems. -Regarding the kernel, 2.6.29.x has been well tested with this userspace -and seems like the best choice to ship for production use. Perhaps we -can put something else (at least source and configs) in /testing, though. -a/slocate-3.1-x86_64-2.txz: Rebuilt. Don't index cifs or tmpfs. - Add a few more directories to the list of paths to prune. - Thanks to Cor Molenaar and Erik Jan Tromp. -l/urwid-0.9.8.4-x86_64-1.txz: Added. Needed for wicd. -n/dnsmasq-2.49-x86_64-1.txz: Upgraded. -n/httpd-2.2.11-x86_64-2.txz: Rebuilt. This needed a recompile against the - new apr package to fix building new modules. - Thanks to Michael Johnson and Ian Carolan for reporting this issue. -n/iwlwifi-3945-ucode-15.32.2.9-fw-1.txz: Upgraded. -n/iwlwifi-5000-ucode-8.24.2.12-fw-1.txz: Upgraded. -n/php-5.2.10-x86_64-1.txz: Upgraded. -x/xorg-server-1.6.1-x86_64-2.txz: Rebuilt. - Fixed default-font-path. Thanks to Bruce Hill. - Patched a key repeat problem in XineramaCheckMotion. - Thanks to Adam Kennedy for pointing out the fix. -x/xorg-server-xephyr-1.6.1-x86_64-2.txz: Rebuilt. -x/xorg-server-xnest-1.6.1-x86_64-2.txz: Rebuilt. -x/xorg-server-xvfb-1.6.1-x86_64-2.txz: Rebuilt. -xap/electricsheep-20090306-x86_64-2.txz: Rebuilt. Patched to fix an issue - where mplayer needs a buffer when reading from a pipe. - Thanks to Eric Hameleers. -extra/wicd/wicd-1.6.1-x86_64-1.txz: Upgraded. Thanks to Robby Workman. +--------------------------+ -Tue Jun 30 00:39:54 CDT 2009 -ap/ghostscript-8.64-x86_64-2.txz: Rebuilt. - Patched various problems with ghostscript that could lead to a denial - of service or the execution of arbitrary code when processing a malicious - or malformed file. +Thu Dec 17 20:51:37 UTC 2009 +d/ruby-1.9.1_p243-x86_64-4.txz: Rebuilt. + Added deprecated headers needed to build kdebindings. +kde/amarok-2.2.1-x86_64-1.txz: Upgraded. +kde/k3b-1.69.0-x86_64-2.txz: Rebuilt. +kde/kdeaccessibility-4.3.4-x86_64-1.txz: Upgraded. +kde/kdeadmin-4.3.4-x86_64-1.txz: Upgraded. +kde/kdeartwork-4.3.4-x86_64-1.txz: Upgraded. +kde/kdebase-4.3.4-x86_64-1.txz: Upgraded. +kde/kdebase-runtime-4.3.4-x86_64-1.txz: Upgraded. +kde/kdebase-workspace-4.3.4-x86_64-1.txz: Upgraded. +kde/kdebindings-4.3.4-x86_64-1.txz: Upgraded. + Thanks to oneforall for the Ruby 1.9.1 compatibility patches. +kde/kdeedu-4.3.4-x86_64-1.txz: Upgraded. +kde/kdegames-4.3.4-x86_64-1.txz: Upgraded. +kde/kdegraphics-4.3.4-x86_64-1.txz: Upgraded. +kde/kdelibs-4.3.4-x86_64-1.txz: Upgraded. +kde/kdelibs-experimental-4.3.4-x86_64-1.txz: Upgraded. +kde/kdemultimedia-4.3.4-x86_64-1.txz: Upgraded. +kde/kdenetwork-4.3.4-x86_64-1.txz: Upgraded. +kde/kdepim-4.3.4-x86_64-1.txz: Upgraded. +kde/kdepim-runtime-4.3.4-x86_64-1.txz: Upgraded. +kde/kdepimlibs-4.3.4-x86_64-1.txz: Upgraded. +kde/kdeplasma-addons-4.3.4-x86_64-1.txz: Upgraded. +kde/kdesdk-4.3.4-x86_64-1.txz: Upgraded. +kde/kdetoys-4.3.4-x86_64-1.txz: Upgraded. +kde/kdeutils-4.3.4-x86_64-1.txz: Upgraded. +kde/kdevelop-3.9.97-x86_64-1.txz: Upgraded. +kde/kdevplatform-0.9.97-x86_64-1.txz: Upgraded. +kde/kdewebdev-4.3.4-x86_64-1.txz: Upgraded. +kde/ktorrent-3.3.2-x86_64-1.txz: Upgraded. +kde/oxygen-icons-4.3.4-x86_64-1.txz: Upgraded. +kdei/kde-l10n-*: Upgraded. +l/PyQt-4.6.2-x86_64-1.txz: Upgraded. +l/boost-1.41.0-x86_64-1.txz: Upgraded. +l/cairo-1.8.8-x86_64-1.txz: Upgraded. + Firefox 3.5.6 requires a new cairo to fix a bug on Windows. :-/ +l/djvulibre-3.5.22-x86_64-1.txz: Upgraded. +l/eigen2-2.0.10-x86_64-1.txz: Upgraded. +l/enchant-1.5.0-x86_64-1.txz: Upgraded. +l/exiv2-0.18.2-x86_64-1.txz: Upgraded. +l/fftw-3.2.2-x86_64-1.txz: Added. + Thanks to Kyle Guinn for the build script. +l/liblastfm-0.3.0-x86_64-1.txz: Added. + Thanks to Vincent Batts for the build script. +l/libsamplerate-0.1.7-x86_64-1.txz: Added. + Thanks to Paul Wisehart and Robby Workman for the build script. +l/poppler-0.12.2-x86_64-1.txz: Upgraded. +l/poppler-data-0.3.1-noarch-1.txz: Upgraded. +l/raptor-1.4.20-x86_64-1.txz: Upgraded. +l/sip-4.9.3-x86_64-1.txz: Upgraded. +l/taglib-1.6.1-x86_64-1.txz: Upgraded. +l/wv2-0.4.2-x86_64-1.txz: Upgraded. +xap/mozilla-firefox-3.5.6-x86_64-1.txz: Upgraded. + Upgraded to firefox-3.5.6. + This fixes some security issues. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0196 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0583 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0584 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0792 + http://www.mozilla.org/security/known-vulnerabilities/firefox35.html (* Security fix *) +xap/pidgin-2.6.4-x86_64-1.txz: Upgraded. +--------------------------+ -Mon Jun 29 14:44:25 CDT 2009 -kde/kdenetwork-4.2.4-x86_64-2.txz: Rebuilt. - Patched to fix Yahoo! protocol. Thanks to Matt Rogers. -xap/pidgin-2.5.8-x86_64-1.txz: Upgraded. -+--------------------------+ -Mon Jun 29 02:14:32 CDT 2009 -d/git-1.6.3.3-x86_64-1.txz: Upgraded. -d/subversion-1.6.3-x86_64-1.txz: Upgraded. -kde/amarok-2.1.1-x86_64-1.txz: Upgraded. -kde/koffice-2.0.1-x86_64-1.txz: Upgraded. -kdei/koffice-l10n-*-2.0.1-noarch-1.txz: - Upgraded to KOffice 2.0.1 l10n packages. -+--------------------------+ -Sat Jun 27 19:02:36 CDT 2009 -ap/most-5.0.0a-x86_64-2.txz: Fixed doc directory. - Thanks to Ellington Santos. -xap/mozilla-thunderbird-2.0.0.22-x86_64-1.txz: - Upgraded to thunderbird-2.0.0.22. - This upgrade fixes some more security bugs. +Mon Dec 14 18:57:37 UTC 2009 +kde/k3b-1.69.0-x86_64-1.txz: Upgraded. ++--------------------------+ +Sat Dec 12 04:51:11 UTC 2009 +xap/gimp-2.6.8-x86_64-1.txz: Upgraded. + This fixes integer overflows in the image handling plugins that could + lead to the execution of arbitrary code or an application crash if a + malicious image is loaded. For more information, see: - http://www.mozilla.org/security/known-vulnerabilities/thunderbird20.html + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1570 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3909 (* Security fix *) +xap/mozilla-thunderbird-3.0-x86_64-1.txz: Upgraded. + Congrats to Mozilla Messaging on the great new Thunderbird release! +--------------------------+ -Fri Jun 26 22:06:58 CDT 2009 -n/samba-3.2.13-x86_64-1.txz: Upgraded. - This upgrade fixes the following security issues: - o CVE-2009-1888: - In Samba 3.0.31 to 3.3.5 (inclusive), an uninitialized read of a - data value can potentially affect access control when "dos filemode" - is set to "yes". - o CVE-2009-1886: - In Samba 3.2.0 to 3.2.12 (inclusive), the smbclient commands dealing - with file names treat user input as a format string to asprintf. - With a maliciously crafted file name smbclient can be made - to execute code triggered by the server. +Thu Dec 10 00:12:58 UTC 2009 +n/ntp-4.2.4p8-x86_64-1.txz: Upgraded. + Prevent a denial-of-service attack involving spoofed mode 7 packets. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1888 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1886 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3563 (* Security fix *) -n/sendmail-8.14.3-x86_64-2.txz: Rebuilt. - Fixed missing praliases. Thanks to Mark Post. -n/sendmail-cf-8.14.3-noarch-2.txz: Rebuilt. -xap/MPlayer-r29390-x86_64-1.txz: Upgraded. -testing/packages/mesa-7.4.4-x86_64-1.txz: Upgraded. -+--------------------------+ -Wed Jun 24 19:48:10 CDT 2009 -l/seamonkey-solibs-1.1.17-x86_64-1.txz: - Upgraded to seamonkey-1.1.17 shared libraries. -xap/seamonkey-1.1.17-x86_64-1.txz: - Upgraded to seamonkey-1.1.17. - This release fixes some more security vulnerabilities. ++--------------------------+ +Tue Dec 8 20:44:44 UTC 2009 +a/kernel-firmware-2.6.29.6-noarch-3.txz: Rebuilt. +a/kernel-generic-2.6.29.6-x86_64-3.txz: Rebuilt. + Patched a bug (CVE-2009-1298) where oversized IP packets cause a + NULL pointer dereference and immediate hang. For more information, see: - http://www.mozilla.org/security/known-vulnerabilities/seamonkey11.html + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1298 + http://lkml.org/lkml/2009/11/25/104 + (* Security fix *) +a/kernel-huge-2.6.29.6-x86_64-3.txz: Rebuilt. + Patched CVE-2009-1298. + (* Security fix *) +a/kernel-modules-2.6.29.6-x86_64-3.txz: Rebuilt. +d/kernel-headers-2.6.29.6-x86-3.txz: Rebuilt. +k/kernel-source-2.6.29.6-noarch-3.txz: Rebuilt. + Patched CVE-2009-1298, and included the diff in /usr/src/linux-2.6.29.6. + (* Security fix *) +kernels/*: Rebuilt. + Patched CVE-2009-1298. (* Security fix *) +--------------------------+ -Mon Jun 22 22:24:01 CDT 2009 -a/quota-3.17-x86_64-1.txz: Upgraded. -a/sharutils-4.7-x86_64-1.txz: Upgraded. -ap/lm_sensors-3.1.1-x86_64-1.txz: Upgraded. -ap/mc-20090621_git-x86_64-1.txz: Upgraded. -ap/most-5.0.0a-x86_64-1.txz: Upgraded. -l/exiv2-0.18.1-x86_64-1.txz: Upgraded. -l/slang-2.1.4-x86_64-1.txz: Upgraded. -extra/aspell-word-lists/aspell-pt_BR-20080707_0-noarch-4.txz: Added. -+--------------------------+ -Sun Jun 21 13:23:07 CDT 2009 -xap/pidgin-2.5.7-x86_64-1.txz: Upgraded. - This fixes the Yahoo protocol plugin. Thanks to Willy Sudiarto Raharjo - for letting us know about the problem and the new Pidgin release. -+--------------------------+ -Sat Jun 20 12:49:02 CDT 2009 -testing/packages/bash-4.0.024-x86_64-1.txz: Added. -testing/packages/mesa-7.4.3-x86_64-1.txz: Upgraded. -+--------------------------+ -Sat Jun 20 00:10:23 CDT 2009 -x/mesa-7.4.1-x86_64-2.txz: Rebuilt. The software rasterizer was missing - again. Thanks to Mark Post for catching the omission. -+--------------------------+ -Fri Jun 19 18:22:20 CDT 2009 -d/ruby-1.8.7_p174-x86_64-1.txz: Upgraded. - This fixes a denial of service issue caused by the BigDecimal method - handling large input values improperly that may allow attackers to - crash the interpreter. The issue affects most Rails applications. +Mon Dec 7 02:13:13 UTC 2009 +d/ruby-1.9.1_p243-x86_64-3.txz: Rebuilt. + Added an explicit --enable-pthread. This is mostly to make sure that we get + the expected option set from future releases of Ruby -- it appears that not + only is --enable-pthread the default in ruby-1.9.1, but trying to use + --disable-pthread doesn't work. Furthermore, Ruby and Tcl/Tk no longer work + together unless both Ruby and Tcl/Tk are compiled with thread support. + Compiling Tcl/Tk with thread support has caused some problems in the past. + If a threaded Tcl app tries to fork(), it will hang, but by now most affected + Tcl apps (such as eggdrop) should have patches available. + Anyway, this should fix the issues with Ruby and Tk. Please test it, and + report any other problems that arise. +tcl/tcl-8.5.8-x86_64-1.txz: Upgraded. + Compiled using --enable-threads, since Ruby requires it to work with Tk. +tcl/tclx-8.4-x86_64-3.txz: Rebuilt. + Recompiled using --enable-threads. +tcl/tix-8.4.3-x86_64-2.txz: Rebuilt. + Recompiled using --enable-threads. +tcl/tk-8.5.8-x86_64-1.txz: Upgraded. + Compiled using --enable-threads, since Ruby requires it to work with Tk. ++--------------------------+ +Sun Dec 6 03:23:23 UTC 2009 +a/sed-4.2.1-x86_64-1.txz: Upgraded. +d/git-1.6.5.4-x86_64-1.txz: Upgraded. +d/python-2.6.4-x86_64-1.txz: Upgraded. +d/subversion-1.6.6-x86_64-1.txz: Upgraded. +l/libxml2-2.7.6-x86_64-1.txz: Upgraded. +l/libxslt-1.1.26-x86_64-1.txz: Upgraded. +l/neon-0.29.0-x86_64-1.txz: Upgraded. ++--------------------------+ +Fri Dec 4 20:02:12 UTC 2009 +d/ruby-1.9.1_p243-x86_64-2.txz: Rebuilt. + Fixed /usr/include/ruby symlink. Thanks to Francisco Ambrozio. ++--------------------------+ +Fri Dec 4 05:03:50 UTC 2009 +kde/koffice-2.1.0-x86_64-2.txz: Rebuilt. + Fixed compiling krita by wrapping jpeglib.h with 'extern "C" { }'. + Thanks to Heinz Wiesinger and Francisco Ambrozio. ++--------------------------+ +Wed Dec 2 20:51:55 UTC 2009 +a/xz-4.999.9beta-x86_64-1.tgz: Upgraded. +ap/rpm-4.7.2-x86_64-1.txz: Upgraded. +ap/sudo-1.6.8p12-x86_64-2.txz: Rebuilt. + Added --with-env-editor to ./configure flags so that users can do this: + VISUAL=/usr/bin/pico visudo OR EDITOR=/usr/bin/pico visudo +d/ruby-1.9.1_p243-x86_64-1.txz: Upgraded. +kde/koffice-2.1.0-x86_64-1.txz: Upgraded. + Note that there's a _really_ ugly patch that was used to make this compile, + otherwise it fails with this error: + kis_jpeg_source.cpp:(.text+0x79): undefined reference to + `jpeg_resync_to_restart(jpeg_decompress_struct*, int)' + I would welcome any hints about how to compile koffice without this patch. +kdei/koffice-l10n-*: Upgraded. +n/bind-9.4.3_P4-x86_64-1.txz: Upgraded. + BIND 9.4.3-P4 is a SECURITY PATCH for BIND 9.4.3-P3. It addresses a + potential cache poisoning vulnerability, in which data in the additional + section of a response could be cached without proper DNSSEC validation. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1904 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-4022 + http://www.kb.cert.org/vuls/id/418861 (* Security fix *) -l/libpng-1.2.37-x86_64-1.txz: Upgraded. - This update fixes a possible security issue. Jeff Phillips discovered an - uninitialized-memory-read bug affecting interlaced images that may have - security implications. +n/proftpd-1.3.2b-x86_64-1.txz: Upgraded. +n/tcpdump-4.0.0-x86_64-2.txz: Rebuilt. + Patched to fix '-i any'. Thanks to Laurence Darby and Kanedaaa Bohater + for the bug report. + Added shared libpcap (and .so.0 compatibility symlink). + Thanks to Niels Horn for suggesting this, and testing compatibility with + programs that expect libpcap.so.0. +xap/sane-1.0.20-x86_64-1.txz: Upgraded. ++--------------------------+ +Mon Nov 16 18:56:26 UTC 2009 +a/openssl-solibs-0.9.8l-x86_64-1.txz: Upgraded. + Disables SSL renegotiation. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2042 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3555 (* Security fix *) -x/mesa-7.4.1-x86_64-1.txz: Upgraded. - Well, actually more like "switched", or "reverted". After many hours - trying to track down the reason for reported instability with X and - compositing (such as crashes when adjusting advanced desktop settings in - KDE), we've found that it seems to happen only with MesaLib 7.4.2. Rather - than trying to cherry-pick changes between 7.4.1 and 7.4.2, we've switched - to shipping 7.4.1 in the main tree, and have not run into any such problems - since making the switch. If people want to continue testing 7.4.2, we've - moved it into /testing. Let us know if you run into any problems with - 7.4.1 that are fixed with 7.4.2, and we'll take a look at individual diffs. -extra/kde3-compat/arts-1.5.10-x86_64-opt1.txz: Added. -extra/kde3-compat/k3b3-1.0.5-x86_64-opt1.txz: Added. - In case the KDE4 version of k3b is not stable, this KDE3 version may be - used along with the KDE3 compatibility packages in extra/kde3-compat/. -extra/kde3-compat/kdelibs3-3.5.10-x86_64-opt1.txz: Added. -extra/kde3-compat/qt3-3.3.8b-x86_64-opt2.txz: Rebuilt. -testing/packages/mesa-7.4.2-x86_64-2.txz: Moved to /testing due to apparent - regressions. -+--------------------------+ -Thu Jun 18 21:21:04 CDT 2009 -The last kernel updates had the wrong names in the ChangeLog due to a cut -and paste error from the IA32 ChangeLog, but it was actually a good thing -because we realized some of the slack-desc files were incorrect as well. -a/kernel-firmware-2.6.29.5-noarch-2.txz: Rebuilt. -a/kernel-generic-2.6.29.5-x86_64-2.txz: Rebuilt. -a/kernel-huge-2.6.29.5-x86_64-2.txz: Rebuilt. -a/kernel-modules-2.6.29.5-x86_64-2.txz: Rebuilt. -d/kernel-headers-2.6.29.5-x86-2.txz: Rebuilt. -l/seamonkey-solibs-1.1.16-x86_64-3.txz: Rebuilt. Fixed /usr/lib64/seamonkey - symlink and path in /etc/ld.so.conf. Thanks to Andy Holder. -k/kernel-source-2.6.29.5-noarch-2.txz: Rebuilt. -n/samba-3.2.12-x86_64-1.txz: Upgraded. -xap/seamonkey-1.1.16-x86_64-3.txz: Rebuilt. -+--------------------------+ -Wed Jun 17 22:11:29 CDT 2009 -a/cryptsetup-1.0.6-x86_64-2.txz: Rebuilt. Fixed cryptsetup to use - "udevadm settle" instead of the deprecated "udevsettle". - Thanks to Robby Workman. -a/kernel-firmware-2.6.29.5-noarch-1.tgz: Upgraded to Linux 2.6.29.5 firmware. -a/kernel-generic-2.6.29.5-x86_64-1.tgz: Upgraded to Linux 2.6.29.5. -a/kernel-huge-2.6.29.5-x86_64-1.tgz: Upgraded to Linux 2.6.29.5. -a/kernel-modules-2.6.29.5-x86_64-1.tgz: Upgraded to Linux 2.6.29.5 modules. -a/pkgtools-13.0-noarch-1.tgz: Bumped version number. -d/kernel-headers-2.6.29.5-x86-1.tgz: Upgraded to Linux 2.6.29.5 headers. -k/kernel-source-2.6.29.5-noarch-1.tgz: Upgraded to Linux 2.6.29.5 source. -l/jre-6u14-x86_64-1.txz: Upgraded to Java(TM) 2 Platform Standard Edition - Runtime Environment Version 6.0 update 14. -n/iproute2-2.6.29_1-x86_64-2.txz: Rebuilt. This needed a recompile - against the new iptables. Thanks to Lars Lindqvist. -extra/jdk-6/jdk-6u14-x86_64-1.txz: Upgraded to Java(TM) 2 Platform Standard - Edition Development Kit Version 6.0 update 14. -isolinux/initrd.img: Rebuilt. -kernels/*: Rebuilt. - Added speakup.s kernel. -usb-and-pxe-installers/: Rebuilt. -+--------------------------+ -Tue Jun 16 17:50:30 CDT 2009 -a/aaa_base-13.0-noarch-1.txz: Rebuilt. Updated slackware-version, and - fixed the /var/X11R6 symlink. -a/e2fsprogs-1.41.6-x86_64-1.txz: Upgraded. -a/ed-1.3-x86_64-1.txz: Upgraded. -a/file-5.03-x86_64-1.txz: Upgraded. -a/findutils-4.4.2-x86_64-1.txz: Upgraded. -a/jfsutils-1.1.14-x86_64-1.txz: Upgraded. -a/ntfs-3g-2009.4.4-x86_64-1.txz: Upgraded. -a/usbutils-0.82-x86_64-1.txz: Upgraded. -a/xfsprogs-3.0.1-x86_64-1.txz: Upgraded. -ap/dmapi-2.2.10-x86_64-1.txz: Upgraded. -ap/man-pages-3.21-noarch-1.txz: Upgraded. -ap/jove-4.16.0.70-x86_64-2.txz: Rebuilt. Fixed jove-recover symlink. -ap/sqlite-3.6.14.2-x86_64-1.txz: Upgraded. -ap/xfsdump-3.0.1-x86_64-1.txz: Upgraded. -d/git-1.6.3.2-x86_64-1.txz: Upgraded. -d/m4-1.4.13-x86_64-1.txz: Upgraded. -d/subversion-1.6.2-x86_64-1.txz: Upgraded. - Thanks to Robby Workman and Vincent Batts for work done on enabling the - bindings for Python, perl, and Ruby. -kde/kdelibs-4.2.4-x86_64-2.txz: Rebuilt. Patched popupapplet.cpp to fix - plasmaboard, a virtual keyboard for plasma. -l/apr-1.3.5-x86_64-1.txz: Upgraded. -l/apr-util-1.3.7-x86_64-1.txz: Upgraded. - Fix underflow in apr_strmatch_precompile. - Fix a denial of service attack against the apr_xml_* interface - using the "billion laughs" entity expansion technique. +kde/mplayerthumbs-1.2-x86_64-2.txz: Removed. + mplayerthumbs has been merged into kdemultimedia in KDE 4.3.3. + It is recommended to reinstall kdemultimedia after removing this package. +l/seamonkey-solibs-2.0-x86_64-3.txz: Rebuilt. +n/nn-6.7.3-x86_64-3.txz: Rebuilt. + Patched to retrieve hostname from /etc/HOSTNAME, use gpg rather than pgp, + and to use correct sizeof(long) depending on the system architecture. + Thanks to Aaron W. Hsu. +n/openssl-0.9.8l-x86_64-1.txz: Upgraded. + Disables SSL renegotiation. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0023 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1955 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3555 (* Security fix *) -l/neon-0.28.4-x86_64-1.txz: Upgraded. -l/sdl-1.2.13-x86_64-4.txz: Upgraded. Use SDL_image-1.2.7, and compile SDL - without esd, as linking to esd breaks audio within VirtualBox. Thanks to - Luigi Trovato for the bug report. Also, compile without arts support. -l/seamonkey-solibs-1.1.16-x86_64-2.txz: Added. This is a subset of the - shared libraries from the seamonkey package used for runtime support of - programs (such as rpm) on machines without X, or applications for X. -n/bluez-utils-3.36-x86_64-6.txz: Rebuilt. Edited rc.bluetooth to start hidd - before any other bluetooth service. This avoids an address conflict that - can cause devices to fail to reconnect if the connection is lost. - Thanks to Heinz Wiesinger. -n/iptables-1.4.3.2-x86_64-1.txz: Upgraded. -n/iw-0.9.14-x86_64-1.txz: Upgraded. -n/lftp-3.7.14-x86_64-1.txz: Upgraded. -xap/mozilla-firefox-3.0.11-x86_64-1.txz: - Upgraded to firefox-3.0.11. +xap/seamonkey-2.0-x86_64-3.txz: Rebuilt. + Restored header files needed to build vlc and other programs. ++--------------------------+ +Wed Nov 11 21:17:19 UTC 2009 +l/seamonkey-solibs-2.0-x86_64-2.txz: Rebuilt. +xap/seamonkey-2.0-x86_64-2.txz: Rebuilt. + As of version 2.0, SeaMonkey no longer includes a shared libgtkmozembed + library, so the pkgconfig and header files for this have been removed from + the package to avoid confusion over why trying to compile programs that + use it no longer works. There's not really any way to avoid this issue -- + it's either upgrade SeaMonkey and lose libgtkmozembed, or keep using version + 1.1.18 and miss out on SeaMonkey security updates. If you really need + libgtkmozembed, the seamonkey-1.1.18 packages will be retained in either + /patches or /pasture for Slackware versions 13.0 and earlier. ++--------------------------+ +Sun Nov 8 04:14:58 UTC 2009 +l/seamonkey-solibs-2.0-x86_64-1.txz: Upgraded. +xap/mozilla-firefox-3.5.5-x86_64-1.txz: Upgraded. + Upgraded to firefox-3.5.5. + This fixes some stability bugs. +xap/seamonkey-2.0-x86_64-1.txz: Upgraded. ++--------------------------+ +Sat Nov 7 22:09:46 UTC 2009 +l/phonon-4.3.1-x86_64-2.txz: Added. + Phonon in Qt is missing support files needed by KDE, so this package + restores the missing pieces. The Phonon library, include files, and + pkgconfig files will remain in the Qt package, as those are the most + up-to-date versions. This package will contain the xine and gstreamer + backends and other files needed by KDE. The gstreamer backend source + is taken from the newer sources in Qt, not from the standalone Phonon. + Sorry about the misfire last time... this stuff should work. :-) +l/qt-4.5.3_063bded-x86_64-3.txz: Rebuilt. + Use -phonon -no-phonon-backend options. ++--------------------------+ +Fri Nov 6 00:22:35 UTC 2009 +a/less-418-x86_64-4.txz: Rebuilt. + Patched lesspipe.sh to handle files of the form *.{1,2,3,4,5,6,7,8,9,n}.gz + that are not gzipped *roff. Thanks to Mark Post. +kde/kdeaccessibility-4.3.3-x86_64-1.txz: Upgraded. +kde/kdeadmin-4.3.3-x86_64-1.txz: Upgraded. +kde/kdeartwork-4.3.3-x86_64-1.txz: Upgraded. +kde/kdebase-4.3.3-x86_64-1.txz: Upgraded. +kde/kdebase-runtime-4.3.3-x86_64-1.txz: Upgraded. +kde/kdebase-workspace-4.3.3-x86_64-1.txz: Upgraded. +kde/kdebindings-4.3.3-x86_64-1.txz: Upgraded. +kde/kdeedu-4.3.3-x86_64-1.txz: Upgraded. +kde/kdegames-4.3.3-x86_64-1.txz: Upgraded. +kde/kdegraphics-4.3.3-x86_64-1.txz: Upgraded. +kde/kdelibs-4.3.3-x86_64-1.txz: Upgraded. +kde/kdelibs-experimental-4.3.3-x86_64-1.txz: Upgraded. +kde/kdemultimedia-4.3.3-x86_64-1.txz: Upgraded. +kde/kdenetwork-4.3.3-x86_64-1.txz: Upgraded. +kde/kdepim-4.3.3-x86_64-1.txz: Upgraded. +kde/kdepim-runtime-4.3.3-x86_64-1.txz: Upgraded. +kde/kdepimlibs-4.3.3-x86_64-1.txz: Upgraded. +kde/kdeplasma-addons-4.3.3-x86_64-1.txz: Upgraded. +kde/kdesdk-4.3.3-x86_64-1.txz: Upgraded. +kde/kdetoys-4.3.3-x86_64-1.txz: Upgraded. +kde/kdeutils-4.3.3-x86_64-1.txz: Upgraded. +kde/kdevelop-3.9.96-x86_64-1.txz: Upgraded. +kde/kdevplatform-0.9.96-x86_64-1.txz: Upgraded. +kde/kdewebdev-4.3.3-x86_64-1.txz: Upgraded. +kde/koffice-2.0.91-x86_64-1.txz: Upgraded. +kde/oxygen-icons-4.3.3-x86_64-1.txz: Upgraded. +kdei/*: Upgraded. +l/gst-plugins-base-0.10.25-x86_64-1.txz: Upgraded. +l/gst-plugins-good-0.10.16-x86_64-1.txz: Added. +l/gstreamer-0.10.25-x86_64-1.txz: Upgraded. +l/jre-6u17-x86_64-1.txz: Upgraded. + Upgraded to Java(TM) 2 Platform Standard Edition Runtime Environment + Version 6.0 update 17. +l/phonon-4.3.1-x86_64-1.txz: Removed. +l/qca-2.0.2-x86_64-1.txz: Upgraded. +l/qt-4.5.3_063bded-x86_64-2.txz: Rebuilt. + Recompiled to add the included version of the Phonon multimedia framework. +l/strigi-0.7.0-x86_64-1.txz: Upgraded. +x/dejavu-fonts-ttf-2.30-noarch-1.txz: Upgraded. +extra/jdk-6/jdk-6u17-x86_64-1.txz: Upgraded. + Upgraded to Java(TM) 2 Platform Standard Edition Development Kit + Version 6.0 update 17. ++--------------------------+ +Mon Nov 2 20:41:16 UTC 2009 +xap/mozilla-firefox-3.5.4-x86_64-1.txz: Upgraded. + Upgraded to firefox-3.5.4. This fixes some security issues. For more information, see: - http://www.mozilla.org/security/known-vulnerabilities/firefox30.html + http://www.mozilla.org/security/known-vulnerabilities/firefox35.html (* Security fix *) -xap/seamonkey-1.1.16-x86_64-2.txz: Rebuilt. -xap/xfce4-power-manager-0.6.6-x86_64-1.txz: Upgraded. -+--------------------------+ -Thu Jun 11 13:57:36 CDT 2009 -l/gtk+2-2.14.7-x86_64-4.txz: Rebuilt. - Fixed update-gdk-pixbuf-loaders and update-gtk-immodules on x86_64. -l/pango-1.22.4-x86_64-4.txz: Rebuilt. - Fixed update-pango-querymodules on x86_64. -l/pycairo-1.8.4-x86_64-3.txz: Rebuilt. -l/vte-0.20.5-x86_64-1.txz: Upgraded. This reverts the soname bump in the - previous version of vte. :-/ -x/mesa-7.4.2-x86_64-2.txz: Rebuilt. Fixed missing DRI drivers. - Thanks to Jason Detring. -xap/xfce-4.6.1-x86_64-4.txz: Rebuilt against the new vte package. -+--------------------------+ -Wed Jun 10 13:23:30 CDT 2009 -This batch of updates includes a major overhaul of X.Org -- thanks to Robby -Workman for doing a huge amount of work updating the build scripts and testing -everything. A large number of packages were recompiled or upgraded to drop -references to the now-obsolete libxcb-xlib and libXaw8 libraries. We have -workarounds in place for old binaries so it wasn't strictly required, but -recompiling anyway gives a cleaner system. Enjoy! -a/apmd-3.2.2-x86_64-2.txz: Rebuilt. -a/dbus-1.2.14-x86_64-1.txz: Upgraded. -ap/gphoto2-2.4.5-x86_64-1.txz: Upgraded. -ap/gutenprint-5.2.3-x86_64-3.txz: Rebuilt. -ap/hplip-3.9.4b-x86_64-2.txz: Rebuilt. Changed the ./configure options to - restore foomatic-rip-hplip, as some printers still don't work using the - regular foomatic-rip filter. This might require your PPDs to be regenerated - by removing the printer and reinstalling it. Thanks to Robby Workman. -ap/normalize-0.7.7-x86_64-1.txz: Upgraded. -ap/pm-utils-1.2.5-x86_64-1.txz: Upgraded. -d/oprofile-0.9.4-x86_64-2.txz: Rebuilt. -d/python-2.6.2-x86_64-3.txz: Rebuilt. Fixed set_pre_input_hook in readline - module. Thanks to Sébastien Renard. -l/cairo-1.8.6-x86_64-3.txz: Rebuilt. -l/gd-2.0.35-x86_64-3.txz: Rebuilt. -l/gegl-0.0.22-x86_64-1.txz: Upgraded. -l/gstreamer-0.10.23-x86_64-1.txz: Upgraded. -l/gst-plugins-base-0.10.23-x86_64-1.txz: Upgraded. -l/gtk+-1.2.10-x86_64-5.txz: Rebuilt. -l/gtk+2-2.14.7-x86_64-3.txz: Rebuilt. Switched from using a patch for changing - the sysconfdir directory to a sed substitution in the SlackBuild. - Thanks to Andrey V. Panov for this improvement. -l/gtkspell-2.0.15-x86_64-1.txz: Upgraded. -l/hal-0.5.11-x86_64-5.txz: Rebuilt. Patched 10-keymap.fdi to allow the - Ctrl-Alt-Backspace key combination to continue to "zap" the X server as - the default has been for decades. Thanks to Robby Workman. -l/imlib-1.9.15-x86_64-4.txz: Rebuilt. -l/jasper-1.900.1-x86_64-2.txz: Rebuilt. -l/lesstif-0.95.0-x86_64-5.txz: Rebuilt. -l/libcaca-0.99.beta16-x86_64-3.txz: Rebuilt. -l/libglade-2.6.4-x86_64-2.txz: Rebuilt. -l/libgphoto2-2.4.6-x86_64-1.txz: Upgraded. -l/libgtkhtml-2.11.1-x86_64-2.txz: Rebuilt. -l/librsvg-2.26.0-x86_64-2.txz: Rebuilt. -l/libvisual-plugins-0.4.0-x86_64-2.txz: Rebuilt. -l/libwmf-0.2.8.4-x86_64-4.txz: Rebuilt. -l/libwmf-docs-0.2.8.4-noarch-4.txz: Rebuilt. -l/libwnck-2.26.1-x86_64-1.txz: Upgraded. -l/libxklavier-3.9-x86_64-2.txz: Rebuilt. -l/pango-1.22.4-x86_64-3.txz: Rebuilt, added x86_64 multilib support to - update script. -l/poppler-0.10.7-x86_64-1.txz: Upgraded. -l/pycairo-1.8.4-x86_64-2.txz: Rebuilt. -l/pygtk-2.14.1-x86_64-2.txz: Rebuilt. -l/sdl-1.2.13-x86_64-3.txz: Rebuilt. -l/startup-notification-0.9-x86_64-2.txz: Rebuilt. -l/t1lib-5.1.2-x86_64-1.txz: Upgraded. -l/vte-0.20.4-x86_64-1.txz: Upgraded. -t/tetex-3.0-x86_64-6.txz: Rebuilt. -t/tetex-doc-3.0-x86_64-6.txz: Rebuilt. -xap/gimp-2.6.6-x86_64-2.txz: Rebuilt. -xap/gucharmap-2.26.2-x86_64-1.txz: Upgraded. -xap/gxine-0.5.903-x86_64-2.txz: Rebuilt. -xap/imagemagick-6.5.3_3-x86_64-1.txz: Upgraded. -xap/pidgin-2.5.6-x86_64-2.txz: Rebuilt. -xap/rxvt-2.7.10-x86_64-4.txz: Rebuilt. -xap/windowmaker-20060427cvs-x86_64-2.txz: Rebuilt. -xap/xchat-2.8.6-x86_64-3.txz: Rebuilt. -xap/xfce-4.6.1-x86_64-3.txz: Rebuilt. -xap/xine-lib-1.1.16.3-x86_64-5.txz: Rebuilt. -xap/xmms-1.2.11-x86_64-3.txz: Rebuilt. Patched wmxmms to fix a problem with - ARGB visuals and GTK+ v1 apps. Thanks to Jason Detring. -Here are the package changes for the upgraded X series. -First we will list the removed X packages: -x/liboldX-1.0.1-x86_64-1.txz: Removed. -x/xf86-input-calcomp-1.1.2-x86_64-1.txz: Removed. -x/xf86-input-digitaledge-1.1.1-x86_64-1.txz: Removed. -x/xf86-input-dmc-1.1.2-x86_64-1.txz: Removed. -x/xf86-input-dynapro-1.1.2-x86_64-1.txz: Removed. -x/xf86-input-elo2300-1.1.2-x86_64-1.txz: Removed. -x/xf86-input-jamstudio-1.2.0-x86_64-1.txz: Removed. -x/xf86-input-magellan-1.2.0-x86_64-1.txz: Removed. -x/xf86-input-magictouch-1.0.0.5-x86_64-2.txz: Removed. -x/xf86-input-microtouch-1.2.0-x86_64-1.txz: Removed. -x/xf86-input-palmax-1.2.0-x86_64-1.txz: Removed. -x/xf86-input-spaceorb-1.1.1-x86_64-1.txz: Removed. -x/xf86-input-summa-1.2.0-x86_64-1.txz: Removed. -x/xf86-input-tek4957-1.2.0-x86_64-1.txz: Removed. -x/xf86-input-ur98-1.1.0-x86_64-2.txz: Removed. -x/xf86-video-cyrix-1.1.0-x86_64-2.txz: Removed. -x/xf86-video-fbdev-0.4.0-x86_64-1.txz: Removed. -x/xf86-video-i810-1.7.4-x86_64-2.txz: Removed. -x/xf86-video-imstt-1.1.0-x86_64-2.txz: Removed. -x/xf86-video-nsc-2.8.3-x86_64-1.txz: Removed. -x/xf86-video-vga-4.1.0-x86_64-2.txz: Removed. -x/xf86-video-via-0.2.2-x86_64-2.txz: Removed. -x/xphelloworld-1.0.1-x86_64-1.txz: Removed. -x/xrx-1.0.1-x86_64-1.txz: Removed. -Now, here are the upgraded, added, and rebuilt X packages: -x/appres-1.0.1-x86_64-2.txz: Rebuilt. -x/bdftopcf-1.0.1-x86_64-2.txz: Rebuilt. -x/beforelight-1.0.3-x86_64-1.txz: Upgraded. -x/bigreqsproto-1.0.2-noarch-2.txz: Rebuilt. -x/bitmap-1.0.3-x86_64-2.txz: Rebuilt. -x/compiz-0.7.8-x86_64-4.txz: Rebuilt. -x/compositeproto-0.4-noarch-2.txz: Rebuilt. -x/damageproto-1.1.0-noarch-2.txz: Rebuilt. -x/dmxproto-2.2.2-noarch-2.txz: Rebuilt. -x/dri2proto-2.0-x86_64-1.txz: Upgraded. -x/editres-1.0.3-x86_64-2.txz: Rebuilt. -x/encodings-1.0.2-noarch-2.txz: Rebuilt. -x/evieext-1.0.2-noarch-2.txz: Rebuilt. -x/fixesproto-4.0-noarch-2.txz: Rebuilt. -x/font-adobe-100dpi-1.0.0-noarch-3.txz: Rebuilt. -x/font-adobe-75dpi-1.0.0-noarch-3.txz: Rebuilt. -x/font-adobe-utopia-100dpi-1.0.1-noarch-3.txz: Rebuilt. -x/font-adobe-utopia-75dpi-1.0.1-noarch-3.txz: Rebuilt. -x/font-adobe-utopia-type1-1.0.1-noarch-3.txz: Rebuilt. -x/font-alias-1.0.1-noarch-2.txz: Rebuilt. -x/font-arabic-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-bh-100dpi-1.0.0-noarch-3.txz: Rebuilt. -x/font-bh-75dpi-1.0.0-noarch-3.txz: Rebuilt. -x/font-bh-lucidatypewriter-100dpi-1.0.0-noarch-3.txz: Rebuilt. -x/font-bh-lucidatypewriter-75dpi-1.0.0-noarch-3.txz: Rebuilt. -x/font-bh-ttf-1.0.0-noarch-3.txz: Rebuilt. -x/font-bh-type1-1.0.0-noarch-3.txz: Rebuilt. -x/font-bitstream-100dpi-1.0.0-noarch-3.txz: Rebuilt. -x/font-bitstream-75dpi-1.0.0-noarch-3.txz: Rebuilt. -x/font-bitstream-speedo-1.0.0-noarch-3.txz: Rebuilt. -x/font-bitstream-type1-1.0.0-noarch-3.txz: Rebuilt. -x/font-cronyx-cyrillic-1.0.0-noarch-3.txz: Rebuilt. -x/font-cursor-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-daewoo-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-dec-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-ibm-type1-1.0.0-noarch-3.txz: Rebuilt. -x/font-isas-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-jis-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-micro-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-misc-cyrillic-1.0.0-noarch-3.txz: Rebuilt. -x/font-misc-ethiopic-1.0.0-noarch-3.txz: Rebuilt. -x/font-misc-meltho-1.0.0-noarch-3.txz: Rebuilt. -x/font-misc-misc-1.0.0-noarch-4.txz: Rebuilt. -x/font-mutt-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-schumacher-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-screen-cyrillic-1.0.1-noarch-3.txz: Rebuilt. -x/font-sony-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-sun-misc-1.0.0-noarch-3.txz: Rebuilt. -x/font-util-1.0.1-x86_64-2.txz: Rebuilt. -x/font-winitzki-cyrillic-1.0.0-noarch-3.txz: Rebuilt. -x/font-xfree86-type1-1.0.1-noarch-2.txz: Rebuilt. -x/fontcacheproto-0.1.2-noarch-2.txz: Rebuilt. -x/fontsproto-2.0.2-noarch-2.txz: Rebuilt. -x/fonttosfnt-1.0.4-x86_64-1.txz: Upgraded. -x/fslsfonts-1.0.2-x86_64-1.txz: Upgraded. -x/fstobdf-1.0.3-x86_64-1.txz: Upgraded. -x/gccmakedep-1.0.2-noarch-2.txz: Rebuilt. -x/glproto-1.4.10-noarch-1.txz: Upgraded. -x/iceauth-1.0.2-x86_64-2.txz: Rebuilt. -x/ico-1.0.2-x86_64-2.txz: Rebuilt. -x/imake-1.0.2-x86_64-3.txz: Rebuilt. -x/inputproto-1.5.0-noarch-1.txz: Upgraded. -x/intel-gpu-tools-1.0.1-x86_64-1.txz: Added. -x/kbproto-1.0.3-noarch-2.txz: Rebuilt. -x/lbxproxy-1.0.1-x86_64-2.txz: Rebuilt. -x/libFS-1.0.1-x86_64-1.txz: Upgraded. -x/libICE-1.0.5-x86_64-1.txz: Upgraded. -x/libSM-1.1.0-x86_64-1.txz: Upgraded. -x/libX11-1.2-x86_64-1.txz: Upgraded. -x/libXScrnSaver-1.1.3-x86_64-2.txz: Rebuilt. -x/libXTrap-1.0.0-x86_64-2.txz: Rebuilt. -x/libXau-1.0.4-x86_64-2.txz: Rebuilt. -x/libXaw-1.0.5-x86_64-1.txz: Upgraded. -x/libXcomposite-0.4.0-x86_64-2.txz: Rebuilt. -x/libXcursor-1.1.9-x86_64-2.txz: Rebuilt. -x/libXdamage-1.1.1-x86_64-2.txz: Rebuilt. -x/libXdmcp-1.0.2-x86_64-2.txz: Rebuilt. -x/libXevie-1.0.2-x86_64-2.txz: Rebuilt. -x/libXext-1.0.5-x86_64-1.txz: Upgraded. -x/libXfixes-4.0.3-x86_64-2.txz: Rebuilt. -x/libXfont-1.4.0-x86_64-1.txz: Upgraded. -x/libXfontcache-1.0.4-x86_64-2.txz: Rebuilt. -x/libXft-2.1.13-x86_64-2.txz: Rebuilt. -x/libXi-1.2.1-x86_64-1.txz: Upgraded. -x/libXinerama-1.0.3-x86_64-2.txz: Rebuilt. -x/libXmu-1.0.4-x86_64-2.txz: Rebuilt. -x/libXp-1.0.0-x86_64-2.txz: Rebuilt. -x/libXpm-3.5.7-x86_64-2.txz: Rebuilt. -x/libXprintAppUtil-1.0.1-x86_64-2.txz: Rebuilt. -x/libXprintUtil-1.0.1-x86_64-2.txz: Rebuilt. -x/libXrandr-1.3.0-x86_64-1.txz: Upgraded. -x/libXrender-0.9.4-x86_64-2.txz: Rebuilt. -x/libXres-1.0.3-x86_64-2.txz: Rebuilt. -x/libXt-1.0.5-x86_64-2.txz: Rebuilt. -x/libXtst-1.0.3-x86_64-2.txz: Rebuilt. -x/libXv-1.0.4-x86_64-2.txz: Rebuilt. -x/libXvMC-1.0.4-x86_64-2.txz: Rebuilt. -x/libXxf86dga-1.0.2-x86_64-2.txz: Rebuilt. -x/libXxf86misc-1.0.1-x86_64-2.txz: Rebuilt. -x/libXxf86vm-1.0.2-x86_64-2.txz: Rebuilt. -x/libdmx-1.0.2-x86_64-2.txz: Rebuilt. -x/libdrm-2.4.11-x86_64-1.txz: Upgraded. -x/libfontenc-1.0.4-x86_64-2.txz: Rebuilt. -x/liblbxutil-1.0.1-x86_64-2.txz: Rebuilt. -x/libpciaccess-0.10.6-x86_64-1.txz: Upgraded. -x/libpthread-stubs-0.1-noarch-2.txz: Rebuilt. -x/libxcb-1.3-x86_64-1.txz: Upgraded. -x/libxkbfile-1.0.5-x86_64-2.txz: Rebuilt. -x/libxkbui-1.0.2-x86_64-2.txz: Rebuilt. -x/listres-1.0.1-x86_64-2.txz: Rebuilt. -x/lndir-1.0.1-x86_64-2.txz: Rebuilt. -x/luit-1.0.3-x86_64-2.txz: Rebuilt. -x/makedepend-1.0.1-x86_64-2.txz: Rebuilt. -x/mesa-7.4.2-x86_64-1.txz: Upgraded. -x/mkcomposecache-1.2-x86_64-2.txz: Rebuilt. -x/mkfontdir-1.0.4-noarch-2.txz: Rebuilt. -x/mkfontscale-1.0.6-x86_64-1.txz: Upgraded. -x/oclock-1.0.1-x86_64-2.txz: Rebuilt. -x/pixman-0.15.10-x86_64-1.txz: Upgraded. -x/printproto-1.0.4-noarch-2.txz: Rebuilt. -x/proxymngr-1.0.1-x86_64-2.txz: Rebuilt. -x/randrproto-1.3.0-noarch-1.txz: Upgraded. -x/recordproto-1.13.2-noarch-2.txz: Rebuilt. -x/rendercheck-1.3-x86_64-2.txz: Rebuilt. -x/renderproto-0.9.3-noarch-2.txz: Rebuilt. -x/resourceproto-1.0.2-noarch-2.txz: Rebuilt. -x/rgb-1.0.3-x86_64-1.txz: Upgraded. -x/rstart-1.0.2-x86_64-2.txz: Rebuilt. -x/scim-1.4.9-x86_64-4.txz: Rebuilt. -x/scim-anthy-1.2.4-x86_64-2.txz: Rebuilt. -x/scim-bridge-0.4.16-x86_64-4.txz: Rebuilt. -x/scim-hangul-0.3.2-x86_64-2.txz: Rebuilt. -x/scim-pinyin-0.5.91-x86_64-2.txz: Rebuilt. -x/scim-input-pad-0.1.2-x86_64-4.txz: Rebuilt. -x/scim-tables-0.5.9-x86_64-3.txz: Rebuilt. -x/scripts-1.0.1-noarch-2.txz: Rebuilt. -x/scrnsaverproto-1.1.0-noarch-2.txz: Rebuilt. -x/sessreg-1.0.4-x86_64-1.txz: Upgraded. -x/setxkbmap-1.0.4-x86_64-2.txz: Rebuilt. -x/showfont-1.0.2-x86_64-1.txz: Upgraded. -x/smproxy-1.0.2-x86_64-2.txz: Rebuilt. -x/trapproto-3.4.3-noarch-2.txz: Rebuilt. -x/twm-1.0.4-x86_64-2.txz: Rebuilt. -x/util-macros-1.2.1-noarch-1.txz: Upgraded. -x/videoproto-2.2.2-noarch-2.txz: Rebuilt. -x/viewres-1.0.1-x86_64-3.txz: Rebuilt. -x/x11-skel-7.4-x86_64-1.txz: Upgraded. -x/x11perf-1.5-x86_64-2.txz: Rebuilt. -x/xauth-1.0.3-x86_64-2.txz: Rebuilt. -x/xbacklight-1.1-x86_64-2.txz: Rebuilt. -x/xbiff-1.0.1-x86_64-2.txz: Rebuilt. -x/xbitmaps-1.0.1-noarch-2.txz: Rebuilt. -x/xcalc-1.0.2-x86_64-2.txz: Rebuilt. -x/xcb-proto-1.5-noarch-1.txz: Upgraded. -x/xcb-util-0.3.5-x86_64-1.txz: Added. -x/xclipboard-1.0.1-x86_64-2.txz: Rebuilt. -x/xclock-1.0.3-x86_64-2.txz: Rebuilt. -x/xcmiscproto-1.1.2-noarch-2.txz: Rebuilt. -x/xcmsdb-1.0.1-x86_64-2.txz: Rebuilt. -x/xcompmgr-1.1.4-x86_64-2.txz: Rebuilt. -x/xconsole-1.0.3-x86_64-2.txz: Rebuilt. -x/xcursor-themes-1.0.1-noarch-2.txz: Rebuilt. -x/xcursorgen-1.0.2-x86_64-2.txz: Rebuilt. -x/xdbedizzy-1.0.2-x86_64-2.txz: Rebuilt. -x/xditview-1.0.1-x86_64-2.txz: Rebuilt. -x/xdm-1.1.8-x86_64-1.txz: Upgraded. -x/xdpyinfo-1.0.3-x86_64-1.txz: Upgraded. -x/xdriinfo-1.0.2-x86_64-2.txz: Rebuilt. -x/xedit-1.1.2-x86_64-1.txz: Upgraded. -x/xev-1.0.3-x86_64-2.txz: Rebuilt. -x/xextproto-7.0.5-noarch-1.txz: Upgraded. -x/xeyes-1.0.1-x86_64-2.txz: Rebuilt. -x/xf86-input-acecad-1.3.0-x86_64-1.txz: Upgraded. -x/xf86-input-aiptek-1.2.0-x86_64-1.txz: Upgraded. -x/xf86-input-citron-2.2.2-x86_64-1.txz: Upgraded. -x/xf86-input-elographics-1.2.3-x86_64-2.txz: Rebuilt. -x/xf86-input-evdev-2.2.2-x86_64-1.txz: Upgraded. -x/xf86-input-fpit-1.3.0-x86_64-1.txz: Upgraded. -x/xf86-input-hyperpen-1.3.0-x86_64-1.txz: Upgraded. -x/xf86-input-joystick-1.4.0-x86_64-1.txz: Upgraded. -x/xf86-input-keyboard-1.3.2-x86_64-1.txz: Upgraded. -x/xf86-input-mouse-1.4.0-x86_64-1.txz: Upgraded. -x/xf86-input-mutouch-1.2.1-x86_64-2.txz: Rebuilt. -x/xf86-input-penmount-1.4.0-x86_64-1.txz: Upgraded. -x/xf86-input-synaptics-1.1.2-x86_64-1.txz: Upgraded. -x/xf86-input-vmmouse-12.6.4-x86_64-1.txz: Upgraded. -x/xf86-input-void-1.2.0-x86_64-1.txz: Upgraded. -x/xf86-video-apm-1.2.1-x86_64-1.txz: Upgraded. -x/xf86-video-ark-0.7.1-x86_64-1.txz: Upgraded. -x/xf86-video-ast-0.89.8-x86_64-1.txz: Upgraded. -x/xf86-video-ati-6.12.2-x86_64-1.txz: Upgraded. -x/xf86-video-chips-1.2.1-x86_64-1.txz: Upgraded. -x/xf86-video-cirrus-1.3.0-x86_64-1.txz: Upgraded. -x/xf86-video-dummy-0.3.1-x86_64-1.txz: Upgraded. -x/xf86-video-glint-1.2.2-x86_64-1.txz: Upgraded. -x/xf86-video-i128-1.3.1-x86_64-2.txz: Rebuilt. -x/xf86-video-i740-1.3.0-x86_64-1.txz: Upgraded. -x/xf86-video-intel-2.7.1-x86_64-1.txz: Upgraded. -x/xf86-video-mach64-6.8.1-x86_64-1.txz: Upgraded. -x/xf86-video-mga-1.4.10-x86_64-1.txz: Upgraded. -x/xf86-video-neomagic-1.2.2-x86_64-1.txz: Upgraded. -x/xf86-video-newport-0.2.2-x86_64-1.txz: Upgraded. -x/xf86-video-nv-2.1.13-x86_64-1.txz: Upgraded. -x/xf86-video-openchrome-0.2.903-x86_64-2.txz: Rebuilt. -x/xf86-video-r128-6.8.0-x86_64-2.txz: Rebuilt. -x/xf86-video-radeonhd-1.2.5-x86_64-1.txz: Upgraded. -x/xf86-video-rendition-4.2.1-x86_64-1.txz: Upgraded. -x/xf86-video-s3-0.6.1-x86_64-1.txz: Upgraded. -x/xf86-video-s3virge-1.10.2-x86_64-1.txz: Upgraded. -x/xf86-video-savage-2.2.1-x86_64-2.txz: Rebuilt. -x/xf86-video-siliconmotion-1.7.1-x86_64-1.txz: Upgraded. -x/xf86-video-sis-0.10.1-x86_64-1.txz: Upgraded. -x/xf86-video-sisusb-0.9.1-x86_64-1.txz: Upgraded. -x/xf86-video-tdfx-1.4.1-x86_64-1.txz: Upgraded. -x/xf86-video-tga-1.2.0-x86_64-1.txz: Upgraded. -x/xf86-video-trident-1.3.1-x86_64-1.txz: Upgraded. -x/xf86-video-tseng-1.2.1-x86_64-1.txz: Upgraded. -x/xf86-video-v4l-0.2.0-x86_64-2.txz: Rebuilt. -x/xf86-video-vesa-2.2.0-x86_64-1.txz: Upgraded. -x/xf86-video-vmware-10.16.6-x86_64-1.txz: Upgraded. -x/xf86-video-voodoo-1.2.1-x86_64-1.txz: Upgraded. -x/xf86bigfontproto-1.1.2-noarch-2.txz: Rebuilt. -x/xf86dga-1.0.2-x86_64-2.txz: Rebuilt. -x/xf86dgaproto-2.0.3-noarch-2.txz: Rebuilt. -x/xf86driproto-2.0.4-noarch-2.txz: Rebuilt. -x/xf86miscproto-0.9.2-noarch-2.txz: Rebuilt. -x/xf86rushproto-1.1.2-noarch-2.txz: Rebuilt. -x/xf86vidmodeproto-2.2.2-noarch-2.txz: Rebuilt. -x/xfd-1.0.1-x86_64-2.txz: Rebuilt. -x/xfindproxy-1.0.1-x86_64-2.txz: Rebuilt. -x/xfontsel-1.0.2-x86_64-2.txz: Rebuilt. -x/xfs-1.0.8-x86_64-1.txz: Upgraded. -x/xfsinfo-1.0.2-x86_64-1.txz: Upgraded. -x/xfwp-1.0.1-x86_64-2.txz: Rebuilt. -x/xgamma-1.0.2-x86_64-2.txz: Rebuilt. -x/xgc-1.0.1-x86_64-2.txz: Rebuilt. -x/xhost-1.0.2-x86_64-2.txz: Rebuilt. -x/xineramaproto-1.1.2-noarch-2.txz: Rebuilt. -x/xinit-1.1.1-x86_64-1.txz: Upgraded. -x/xinput-1.4.2-x86_64-1.txz: Upgraded. -x/xkbcomp-1.0.5-x86_64-1.txz: Upgraded. -x/xkbevd-1.0.2-x86_64-2.txz: Rebuilt. -x/xkbprint-1.0.1-x86_64-2.txz: Rebuilt. -x/xkbutils-1.0.1-x86_64-2.txz: Rebuilt. -x/xkeyboard-config-1.6-noarch-1.txz: Upgraded. -x/xkill-1.0.1-x86_64-2.txz: Rebuilt. -x/xload-1.0.2-x86_64-2.txz: Rebuilt. -x/xlogo-1.0.1-x86_64-2.txz: Rebuilt. -x/xlsatoms-1.0.1-x86_64-2.txz: Rebuilt. -x/xlsclients-1.0.1-x86_64-2.txz: Rebuilt. -x/xlsfonts-1.0.2-x86_64-2.txz: Rebuilt. -x/xmag-1.0.2-x86_64-2.txz: Rebuilt. -x/xman-1.0.3-x86_64-2.txz: Rebuilt. -x/xmessage-1.0.2-x86_64-2.txz: Rebuilt. -x/xmh-1.0.1-x86_64-2.txz: Rebuilt. -x/xmodmap-1.0.3-x86_64-2.txz: Rebuilt. -x/xmore-1.0.1-x86_64-2.txz: Rebuilt. -x/xorg-cf-files-1.0.2-noarch-2.txz: Rebuilt. -x/xorg-docs-1.4-noarch-2.txz: Rebuilt. -x/xorg-server-1.6.1-x86_64-1.txz: Upgraded. -x/xorg-server-xephyr-1.6.1-x86_64-1.txz: Added. -x/xorg-server-xnest-1.6.1-x86_64-1.txz: Upgraded. -x/xorg-server-xvfb-1.6.1-x86_64-1.txz: Upgraded. -x/xorg-sgml-doctools-1.2-noarch-2.txz: Rebuilt. -x/xplsprinters-1.0.1-x86_64-2.txz: Rebuilt. -x/xpr-1.0.2-x86_64-2.txz: Rebuilt. -x/xprehashprinterlist-1.0.1-x86_64-2.txz: Rebuilt. -x/xprop-1.0.4-x86_64-2.txz: Rebuilt. -x/xproto-7.0.15-noarch-1.txz: Upgraded. -x/xproxymanagementprotocol-1.0.2-noarch-2.txz: Rebuilt. -x/xpyb-1.1-x86_64-1.txz: Added. -x/xrandr-1.3.0-x86_64-1.txz: Upgraded. -x/xrdb-1.0.5-x86_64-2.txz: Rebuilt. -x/xrefresh-1.0.2-x86_64-2.txz: Rebuilt. -x/xscope-1.1-x86_64-1.txz: Added. -x/xset-1.0.4-x86_64-2.txz: Rebuilt. -x/xsetmode-1.0.0-x86_64-2.txz: Rebuilt. -x/xsetpointer-1.0.1-x86_64-2.txz: Rebuilt. -x/xsetroot-1.0.2-x86_64-2.txz: Rebuilt. -x/xsm-1.0.1-x86_64-2.txz: Rebuilt. -x/xstdcmap-1.0.1-x86_64-2.txz: Rebuilt. -x/xterm-243-x86_64-2.txz: Rebuilt. -x/xtrans-1.2.3-noarch-1.txz: Upgraded. -x/xtrap-1.0.2-x86_64-2.txz: Rebuilt. -x/xvidtune-1.0.1-x86_64-2.txz: Rebuilt. -x/xvinfo-1.0.2-x86_64-2.txz: Rebuilt. -x/xwd-1.0.2-x86_64-1.txz: Upgraded. -x/xwininfo-1.0.4-x86_64-1.txz: Upgraded. -x/xwud-1.0.1-x86_64-2.txz: Rebuilt. -+--------------------------+ -Sun Jun 7 17:48:06 CDT 2009 -kde/amarok-2.1-x86_64-2.txz: Recompiled to restore libgpod support. - Thanks to Carlos Corbacho. -l/libgpod-0.7.2-x86_64-1.txz: Upgraded to libgpod-0.7.2. -l/libkarma-0.1.1-x86_64-1.txz: Upgraded to libkarma-0.1.1. -l/libmtp-0.3.6-x86_64-1.txz: Upgraded to libmtp-0.3.6. -+--------------------------+ -Sat Jun 6 16:43:18 CDT 2009 -This batch of updates includes KDE 4.2.4. Thanks to the KDE team (it just keeps -getting better! :-), and to Eric Hameleers for updating the KDE build scripts. -a/kernel-modules-2.6.29.4-x86_64-3.txz: Fixed rc.modules to apply CPUfreq - settings to all online CPUs, not just cpu0. Thanks to Ellington Santos. -ap/linuxdoc-tools-0.9.56-x86_64-3.txz: Fixed to remove .pyc files already - present in the Python package. Thanks to Stuart Winter. -ap/mysql-5.0.82-x86_64-1.txz: Upgraded to mysql-5.0.82. -ap/rpm-4.7.0-x86_64-2.txz: Recompiled to add python bindings. -ap/slackpkg-2.71.2-noarch-2.tgz: Configure Slackware64 defaults for ARCH and - PKGMAIN. Thanks to Eric Hameleers. -d/pkg-config-0.23-x86_64-3.txz: Fixed lib64 pathnames in - /etc/profile.d/pkgconfig.* Thanks to Eric Hameleers. -kde/amarok-2.1-x86_64-1.txz: Upgraded to amarok-2.1. -kde/guidance-power-manager-4.2.4-x86_64-1.txz: - Upgraded to guidance-power-manager-4.2.4. -kde/kdeaccessibility-4.2.4-x86_64-1.txz: Upgraded to kdeaccessibility-4.2.4. -kde/kdeadmin-4.2.4-x86_64-1.txz: Upgraded to kdeadmin-4.2.4. -kde/kdeartwork-4.2.4-x86_64-1.txz: Upgraded to kdeartwork-4.2.4. -kde/kdebase-4.2.4-x86_64-1.txz: Upgraded to kdebase-4.2.4. -kde/kdebase-runtime-4.2.4-x86_64-1.txz: Upgraded to kdebase-runtime-4.2.4. -kde/kdebase-workspace-4.2.4-x86_64-1.txz: Upgraded to kdebase-workspace-4.2.4. -kde/kdebindings-4.2.4-x86_64-1.txz: Upgraded to kdebindings-4.2.4. -kde/kdeedu-4.2.4-x86_64-1.txz: Upgraded to kdeedu-4.2.4. -kde/kdegames-4.2.4-x86_64-1.txz: Upgraded to kdegames-4.2.4. -kde/kdegraphics-4.2.4-x86_64-1.txz: Upgraded to kdegraphics-4.2.4. -kde/kdelibs-4.2.4-x86_64-1.txz: Upgraded to kdelibs-4.2.4. -kde/kdemultimedia-4.2.4-x86_64-1.txz: Upgraded to kdemultimedia-4.2.4. -kde/kdenetwork-4.2.4-x86_64-1.txz: Upgraded to kdenetwork-4.2.4. -kde/kdepim-4.2.4-x86_64-1.txz: Upgraded to kdepim-4.2.4. -kde/kdepimlibs-4.2.4-x86_64-1.txz: Upgraded to kdepimlibs-4.2.4. -kde/kdeplasma-addons-4.2.4-x86_64-1.txz: Upgraded to kdeplasma-addons-4.2.4. -kde/kdesdk-4.2.4-x86_64-1.txz: Upgraded to kdesdk-4.2.4. -kde/kdetoys-4.2.4-x86_64-1.txz: Upgraded to kdetoys-4.2.4. -kde/kdeutils-4.2.4-x86_64-1.txz: Upgraded to kdeutils-4.2.4. -kde/kdewebdev-4.2.4-x86_64-1.txz: Upgraded to kdewebdev-4.2.4. -kde/koffice-2.0.0-x86_64-1.txz: Upgraded to koffice-2.0.0. -kde/konq-plugins-4.2.4-x86_64-1.txz: Upgraded to konq-plugins-4.2.4. -kde/ktorrent-3.2.2-x86_64-1.txz: Upgraded to ktorrent-3.2.2. -kde/mplayerthumbs-1.2-x86_64-2.txz: Recompiled. -kde/skanlite-0.3_kde4.2.4-x86_64-1.txz: Upgraded to skanlite-0.3_kde4.2.4. -kdei/kde-l10n-*-4.2.4-noarch-1.txz: Upgraded to KDE 4.2.4 l10n packages. -kdei/koffice-l10n-*-2.0.0-noarch-1.txz: - Upgraded to KOffice 2.0.0 l10n packages. -l/qtscriptgenerator-0.1.0-x86_64-1.txz: Added qtscriptgenerator-0.1.0, - needed by amarok. Thanks to Heinz Wiesinger for the build script. -l/taglib-extras-0.1.3-x86_64-1.txz: Added taglib-extras-0.1.3, - needed by amarok. -n/netatalk-2.0.4-x86_64-1.txz: Upgraded to netatalk-2.0.4. - Thanks to Robby Workman. -n/vsftpd-2.1.2-x86_64-1.txz: Upgraded to vsftpd-2.1.2. - Thanks to Robby Workman. -extra/slacktrack/slacktrack-2.05-x86_64-1.txz: Upgraded to slacktrack-2.05. - Thanks to Stuart Winter. +--------------------------+ -Wed Jun 3 18:17:33 CDT 2009 -a/kernel-modules-2.6.29.4-x86_64-2.txz: Fixed missing rc.modules symlink. - Thanks to Ricardo Felipe Klein. -a/pkgtools-12.34567890-noarch-6.tgz: Patched makepkg to warn about possible - problems with /usr/share/info usage. Thanks to Robby Workman. -l/liboil-0.3.16-x86_64-1.txz: Upgraded to liboil-0.3.16. -n/ntp-4.2.4p7-x86_64-1.txz: Upgraded to ntp-4.2.4p7. - Stack-based buffer overflow in the cookedprint function in ntpq/ntpq.c in ntpq - in NTP before 4.2.4p7-RC2 allows arbitrary code execution by a malicious - remote NTP server. - Stack-based buffer overflow in the crypto_recv function in ntp_crypto.c in - ntpd in NTP before 4.2.4p7 allows remote attackers to execute arbitrary code. - This does not affect the Slackware ntpd as it does not link with openssl. +Sat Oct 31 21:40:29 UTC 2009 +l/PyQt-4.6.1-x86_64-1.txz: Upgraded. +l/sip-4.9.1-x86_64-1.txz: Upgraded. ++--------------------------+ +Fri Oct 30 23:37:47 UTC 2009 +testing/packages/gcc-4.4.2/gcc-4.4.2-x86_64-1.txz: Upgraded. +testing/packages/gcc-4.4.2/gcc-g++-4.4.2-x86_64-1.txz: Upgraded. +testing/packages/gcc-4.4.2/gcc-gfortran-4.4.2-x86_64-1.txz: Upgraded. +testing/packages/gcc-4.4.2/gcc-gnat-4.4.2-x86_64-1.txz: Upgraded. +testing/packages/gcc-4.4.2/gcc-java-4.4.2-x86_64-1.txz: Upgraded. +testing/packages/gcc-4.4.2/gcc-objc-4.4.2-x86_64-1.txz: Upgraded. ++--------------------------+ +Fri Oct 30 05:54:05 UTC 2009 +l/QScintilla-2.4-x86_64-2.txz: Rebuilt. + This fixes missing PyQt bindings -- perhaps a compile order issue. + Thanks to Raffaele Sgarro and Grigorios Bouzakis. ++--------------------------+ +Wed Oct 28 22:50:35 UTC 2009 +kde/kdegraphics-4.3.2-x86_64-2.txz: Rebuilt. + Recompiled against new libpoppler. +kde/koffice-2.0.83-x86_64-2.txz: Rebuilt. + Recompiled against new libpoppler. +l/babl-0.1.0-x86_64-1.txz: Upgraded. +l/gegl-0.1.0-x86_64-1.txz: Upgraded. +l/poppler-0.12.1-x86_64-1.txz: Upgraded. + Security fixes based on xpdf 3.02pl4 were integrated. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-0159 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1252 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3603 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3604 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3605 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3606 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3608 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3609 (* Security fix *) -extra/tightvnc/tightvnc-1.3.10-x86_64-1.txz: Upgraded to tightvnc-1.3.10. -+--------------------------+ -Sun May 31 13:11:58 CDT 2009 -xap/xine-lib-1.1.16.3-x86_64-4.txz: Fixed $ARCH typo, and added the - ${LIBDIRSUFFIX} to the created codecs directory. -+--------------------------+ -Fri May 29 17:16:40 CDT 2009 -a/kernel-firmware-2.6.29.4-noarch-1.txz: Upgraded to Linux 2.6.29.4 firmware. -a/kernel-generic-2.6.29.4-x86_64-1.txz: Upgraded to Linux 2.6.29.4. -a/kernel-huge-2.6.29.4-x86_64-1.txz: Upgraded to Linux 2.6.29.4. -a/kernel-modules-2.6.29.4-x86_64-1.txz: Upgraded to Linux 2.6.29.4 modules. -ap/vim-7.2.191-x86_64-1.txz: Patched vimrc to add the option - 'set backupskip+=/var/spool/cron/*', which should fix the problems with - using vim with "crontab -e". Note that if a global vimrc already exists - the new one will be installed as vimrc.new and must be moved into place. - Thanks to Rodrigo Bistolfi for the patch. -d/kernel-headers-2.6.29.4-x86-1.txz: Upgraded to Linux 2.6.29.4 headers. -k/kernel-source-2.6.29.4-noarch-1.txz: Upgraded to Linux 2.6.29.4 source. -xap/MPlayer-r29328-x86_64-1.txz: Upgraded to MPlayer-r29328, and changed the - codecs directory to /usr/lib64/codecs. -xap/vim-gvim-7.2.191-x86_64-1.txz: Recompiled. -xap/xine-lib-1.1.16.3-x86-64-3.txz: Recompiled, changed the codecs directory - to /usr/lib64/codecs. -isolinux/initrd.img: Rebuilt. -usb-and-pxe-installers/usbboot.img: Rebuilt. +l/poppler-data-0.3.0-noarch-1.txz: Upgraded. +xap/gimp-2.6.7-x86_64-1.txz: Upgraded. +xap/xpdf-3.02pl4-x86_64-1.txz: Upgraded. + This update fixes several security issues that could lead to an + application crash, or execution of arbitrary code. + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3603 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3604 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3605 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3606 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3608 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3609 + (* Security fix *) ++--------------------------+ +Thu Oct 22 22:09:40 UTC 2009 +New KDE and other updates. Thanks to Vincent Batts, Robby Workman, Piter Punk, + and Eric Hameleers for the help! +ap/gphoto2-2.4.7-x86_64-1.txz: Upgraded. +kde/guidance-power-manager-4.3.1-x86_64-1.txz: Upgraded. +kde/k3b-1.68.0-x86_64-1.txz: Upgraded. +kde/kaudiocreator-r1038308-x86_64-1.txz: Upgraded. +kde/kdeaccessibility-4.3.2-x86_64-1.txz: Upgraded. +kde/kdeadmin-4.3.2-x86_64-1.txz: Upgraded. +kde/kdeartwork-4.3.2-x86_64-1.txz: Upgraded. +kde/kdebase-4.3.2-x86_64-1.txz: Upgraded. +kde/kdebase-runtime-4.3.2-x86_64-1.txz: Upgraded. +kde/kdebase-workspace-4.3.2-x86_64-1.txz: Upgraded. +kde/kdebindings-4.3.2-x86_64-1.txz: Upgraded. +kde/kdeedu-4.3.2-x86_64-1.txz: Upgraded. +kde/kdegames-4.3.2-x86_64-1.txz: Upgraded. +kde/kdegraphics-4.3.2-x86_64-1.txz: Upgraded. +kde/kdelibs-4.3.2-x86_64-1.txz: Upgraded. +kde/kdelibs-experimental-4.3.2-x86_64-1.txz: Added. +kde/kdemultimedia-4.3.2-x86_64-1.txz: Upgraded. +kde/kdenetwork-4.3.2-x86_64-1.txz: Upgraded. +kde/kdepim-4.3.2-x86_64-1.txz: Upgraded. +kde/kdepim-runtime-4.3.2-x86_64-1.txz: Added. +kde/kdepimlibs-4.3.2-x86_64-1.txz: Upgraded. +kde/kdeplasma-addons-4.3.2-x86_64-1.txz: Upgraded. +kde/kdesdk-4.3.2-x86_64-1.txz: Upgraded. +kde/kdetoys-4.3.2-x86_64-1.txz: Upgraded. +kde/kdeutils-4.3.2-x86_64-1.txz: Upgraded. +kde/kdevelop-3.9.95-x86_64-1.txz: Upgraded. +kde/kdevplatform-0.9.95-x86_64-1.txz: Upgraded. +kde/kdewebdev-4.3.2-x86_64-1.txz: Upgraded. +kde/koffice-2.0.83-x86_64-1.txz: Upgraded. +kde/konq-plugins-4.3.1-x86_64-1.txz: Upgraded. +kde/kopete-cryptography-1.3.0_kde4.3.1-x86_64-1.txz: Added. +kde/ktorrent-3.2.3-x86_64-1.txz: Upgraded. +kde/oxygen-icons-4.3.2-x86_64-1.txz: Added. +kde/skanlite-0.3_kde4.3.1-x86_64-1.txz: Upgraded. +kdei/*: Upgraded. +l/PyQt-4.6-x86_64-1.txz: Upgraded. +l/QScintilla-2.4-x86_64-1.txz: Upgraded. +l/akonadi-1.2.1-x86_64-1.txz: Upgraded. +l/alsa-lib-1.0.21a-x86_64-1.txz: Upgraded. +l/eigen2-2.0.6-x86_64-1.txz: Upgraded. +l/libgphoto2-2.4.7-x86_64-1.txz: Upgraded. +l/qt-4.5.3_063bded-x86_64-1.txz: Upgraded. +l/sip-4.9-x86_64-1.txz: Upgraded. +l/wv2-0.4.1-x86_64-1.txz: Upgraded. +xap/MPlayer-r29789-x86_64-1.txz: Upgraded. +extra/wicd/wicd-1.6.2.2-x86_64-1.txz: Upgraded. ++--------------------------+ +Sun Oct 18 23:09:03 UTC 2009 +l/shared-mime-info-0.70-x86_64-2.txz: Rebuilt. + Fixed the install script to run update-mime-database for each user on the + system, fixing an issue with missing or broken icons. +--------------------------+ -Tue May 26 18:05:17 CDT 2009 -a/kbd-1.15-x86_64-2.txz: Fixed directory perms in the documentation. -ap/linuxdoc-tools-0.9.56-x86_64-2.txz: Added missing asciidoc filters. - Thanks to 'oneforall' for the report. -xap/MPlayer-r29324-x86_64-1.txz: Upgraded to MPlayer-r29324. - Enable runtime CPU detection only for x86 and x86_64. -xap/pidgin-2.5.6-x86_64-1.txz: Upgraded to pidgin-2.5.6. - This version fixes security issues that could lead to a denial of service or - the execution of arbitrary code as the user running Pidgin. +Sat Oct 17 23:56:15 UTC 2009 +a/hdparm-9.27-x86_64-1.txz: Upgraded. +ap/hplip-3.9.4b-x86_64-3.txz: Rebuilt. +ap/linuxdoc-tools-0.9.56-x86_64-6.txz: Rebuilt. + Recompiled against perl-5.10.1. +ap/mysql-5.1.39-x86_64-2.txz: Rebuilt. + Added --with-innodb option. This was omitted from the last package version + since ./configure --help no longer lists --with-innodb or --without-innodb, + but evidently the option is still supported (and needed). + Thanks to Amritpal Bath. +d/git-1.6.5-x86_64-1.txz: Upgraded. + Compiled against perl-5.10.1. +d/subversion-1.6.5-x86_64-1.txz: Upgraded. + Compiled against perl-5.10.1. +l/pilot-link-0.12.3-x86_64-10.txz: Rebuilt. + Recompiled against perl-5.10.1. +l/shared-mime-info-0.70-x86_64-1.txz: Upgraded. +n/gnutls-2.8.4-x86_64-1.txz: Upgraded. + This contains a correct fix for the NUL in CN/SAN SSL vulnerability. For more information, see: - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1373 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1374 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1375 - http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-1376 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2730 + (* Security fix *) +n/irssi-0.8.14-x86_64-2.txz: Rebuilt. + Recompiled against perl-5.10.1. +n/net-snmp-5.5-x86_64-1.txz: Upgraded. +n/obexftp-0.23-x86_64-2.txz: Rebuilt. + Recompiled against perl-5.10.1. +n/php-5.2.11-x86_64-2.txz: Rebuilt. + Changed a ./configure option from --with-pdo-sqlite=shared to + --with-pdo-sqlite=shared,/usr to use the system sqlite library. + Thanks to Jeff MacLoue. +n/samba-3.4.2-x86_64-2.txz: Rebuilt. + Fixed missing libnss_winbind.so.2 and libnss_wins.so.2. + Thanks to oneforall. +xap/imagemagick-6.5.6_10-x86_64-1.txz: Upgraded. + Compiled against perl-5.10.1. +xap/pidgin-2.6.3-x86_64-1.txz: Upgraded. + This update fixes an issue where a remote user can cause libpurple-based + clients to crash. + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3615 (* Security fix *) +--------------------------+ -Mon May 25 17:52:56 CDT 2009 -a/cryptsetup-1.0.6-x86_64-1.txz: Upgraded to cryptsetup-1.0.6. -d/binutils-2.18.50.0.9-x86_64-2.txz: Changes to enable multilib support. - Thanks to Fred Emmott. -d/gcc-4.3.3-x86_64-4.txz: Changes in specs file to enable multilib support. - Thanks to Fred Emmott. -d/gcc-g++-4.3.3-x86_64-4.txz: Recompiled. -d/gcc-gfortran-4.3.3-x86_64-4.txz: Recompiled. -d/gcc-gnat-4.3.3-x86_64-4.txz: Recompiled. -d/gcc-java-4.3.3-x86_64-4.txz: Recompiled. -d/gcc-objc-4.3.3-x86_64-4.txz: Recompiled. -xap/MPlayer-r29322-x86_64-1.txz: Upgraded to revision r29322. -isolinux/initrd.img: Rebuilt. -usb-and-pxe-installers/usbboot.img: Rebuilt. +Sun Oct 4 15:53:07 CDT 2009 +l/redland-1.0.9-x86_64-2.txz: Fixed a bug that broke nepomuk. + Thanks to Heinz Wiesinger. +--------------------------+ -Sat May 23 03:09:39 CDT 2009 -We had to recompile ncurses with a couple extra ./configure options to fix -corruption in the nVidia driver installer screens, and this in turn required -recompiling quite a few more packages... -Thanks to Fred Emmott for helping us out with this. :-) -a/aaa_elflibs-12.34-x86_64-2.txz: Rebuilt. -a/dialog-1.1_20080819-x86_64-3.txz: Recompiled. -a/gawk-3.1.6-x86_64-2.txz: Recompiled. -a/less-418-x86_64-3.txz: Recompiled. -a/minicom-2.1-x86_64-3.txz: Recompiled. -a/procps-3.2.7-x86_64-3.txz: Recompiled. -a/shadow-4.0.3-x86_64-16.txz: Recompiled. -a/util-linux-ng-2.14.2-x86_64-2.txz: Recompiled. -ap/a2ps-4.14-x86_64-4.txz: Recompiled. -ap/alsa-utils-1.0.18-x86_64-2.txz: Recompiled. -ap/aumix-2.8-x86_64-2.txz: Recompiled. -ap/bc-1.06.95-x86_64-2.txz: Recompiled. -ap/bpe-2.01.00-x86_64-2.txz: Recompiled. -ap/cdrtools-2.01.01a57-x86_64-3.txz: Recompiled. -ap/gphoto2-2.4.4-x86_64-2.txz: Recompiled. -ap/gutenprint-5.2.3-x86_64-2.txz: Recompiled. -ap/joe-3.5-x86_64-2.txz: Recompiled. -ap/mysql-5.0.81-x86_64-2.txz: Recompiled. -ap/nano-2.0.9-x86_64-2.txz: Recompiled. -ap/rexima-1.4-x86_64-2.txz: Recompiled. -ap/sc-7.16-x86_64-2.txz: Recompiled. -ap/screen-4.0.3-x86_64-2.txz: Recompiled. -ap/sqlite-3.6.14-x86_64-2.txz: Recompiled. -ap/texinfo-4.13a-x86_64-3.txz: Recompiled. -ap/xfsdump-3.0.0-x86_64-2.txz: Recompiled. -ap/zsh-4.3.6-x86_64-2.txz: Recompiled. -d/clisp-2.47-x86_64-2.txz: Recompiled. -d/cmake-2.6.2-x86_64-2.txz: Recompiled. -d/cscope-15.6-x86_64-2.txz: Recompiled. -d/dev86-0.16.17-x86_64-2.txz: Recompiled. -d/gdb-6.8-x86_64-2.txz: Recompiled. -d/gettext-tools-0.17-x86_64-3.txz: Recompiled. -d/guile-1.8.6-x86_64-2.txz: Recompiled. -d/perl-5.10.0-x86_64-2.txz: Recompiled. -d/python-2.6.2-x86_64-2.txz: Recompiled. -d/ruby-1.8.7_p160-x86_64-2.txz: Recompiled. -e/emacs-22.3-x86_64-3.txz: Recompiled. -kde/kdeedu-4.2.3-x86_64-2.txz: Recompiled. -kde/kdepim-4.2.3-x86_64-2.txz: Recompiled. -kde/kdesdk-4.2.3-x86_64-2.txz: Recompiled. -kde/mplayerthumbs-1.2-x86_64-2.txz: Recompiled. -l/exiv2-0.18-x86_64-2.txz: Recompiled. -l/libcaca-0.99.beta16-x86_64-2.txz: Recompiled. -l/libgphoto2-2.4.4-x86_64-2.txz: Recompiled. -l/libnjb-2.2.6-x86_64-4.txz: Recompiled. -l/ncurses-5.7-x86_64-2.txz: Recompiled with --with-chtype=long - --with-mmask-t=long to fix issues with the nVidia installer. - Thanks to Fred Emmott. -l/openexr-1.6.1-x86_64-2.txz: Recompiled. -l/pilot-link-0.12.3-x86_64-9.txz: Recompiled. -l/vte-0.20.1-x86_64-2.txz: Recompiled. -n/alpine-2.00-x86_64-2.txz: Recompiled. -n/bind-9.4.3_P2-x86_64-2.txz: Use /dev/urandom to stop blocking on install. -n/elm-2.5.8-x86_64-2.txz: Recompiled. -n/epic4-2.8-x86_64-2.txz: Recompiled. -n/gnupg2-2.0.11-x86_64-2.txz: Recompiled. -n/gnutls-2.6.6-x86_64-2.txz: Recompiled. -n/imapd-2.00-x86_64-2.txz: Recompiled. -n/iptraf-3.0.0-x86_64-3.txz: Recompiled. -n/irssi-0.8.13-x86_64-2.txz: Recompiled. -n/lftp-3.7.8-x86_64-2.txz: Recompiled. -n/lynx-2.8.6rel.5-x86_64-2.txz: Recompiled. -n/mcabber-0.9.9-x86_64-2.txz: Recompiled. -n/metamail-2.7-x86_64-4.txz: Recompiled. -n/mtr-0.73-x86_64-2.txz: Recompiled. -n/mutt-1.4.2.3-x86_64-2.txz: Recompiled. -n/ncftp-3.2.2-x86_64-2.txz: Recompiled. -n/net-snmp-5.4.2.1-x86_64-2.txz: Recompiled. -n/netatalk-2.0.3-x86_64-2.txz: Recompiled. -n/netkit-bootparamd-0.17-x86_64-2.txz: Recompiled. -n/netkit-ntalk-0.17-x86_64-3.txz: Recompiled. -n/netwatch-1.3.0-x86_64-2.txz: Recompiled. -n/nn-6.7.3-x86_64-2.txz: Recompiled. -n/ntp-4.2.4p6-x86_64-2.txz: Recompiled. -n/openssh-5.2p1-x86_64-2.txz: Recompiled. -n/proftpd-1.3.2-x86_64-2.txz: Recompiled. -n/samba-3.2.10-x86_64-2.txz: Recompiled. -n/telnet-0.17-x86_64-2.txz: Recompiled. -n/tin-1.8.2-x86_64-2.txz: Recompiled. -n/trn-3.6-x86_64-2.txz: Recompiled. -n/wpa_supplicant-0.6.9-x86_64-2.txz: Recompiled. -n/ytalk-3.3.0-x86_64-2.txz: Recompiled. -x/scim-1.4.9-x86_64-3.txz: Recompiled. -x/scim-bridge-0.4.16-x86_64-3.txz: Recompiled. -x/scim-input-pad-0.1.2-x86_64-3.txz: Recompiled. -x/scim-tables-0.5.9-x86_64-2.txz: Recompiled. -x/xorg-server-1.4.2-x86_64-2.txz: Recompiled. -x/xorg-server-xnest-1.4.2-x86_64-2.txz: Recompiled. -x/xorg-server-xvfb-1.4.2-x86_64-2.txz: Recompiled. -xap/MPlayer-r29301-x86_64-2.txz: Recompiled. -xap/gftp-2.0.19-x86_64-2.txz: Recompiled. -xap/gnuchess-5.07-x86_64-4.txz: Recompiled. -xap/pidgin-2.5.5-x86_64-4.txz: Recompiled. -xap/sane-1.0.19-x86_64-4.txz: Recompiled. -xap/xine-lib-1.1.16.3-x86_64-2.txz: Recompiled. -xap/xine-ui-0.99.5-x86_64-2.txz: Recompiled. -y/bsd-games-2.13-x86_64-9.txz: Recompiled. -+--------------------------+ -Tue May 19 15:36:49 CDT 2009 -<tick> <tick> Ermm... is this thing on? - -Initial public release of Slackware64-current. -He's trying to lay low, but thanks to Eric Hameleers for the huge amount -of work he did to make this possible. :-) - -Enjoy! +Sun Oct 4 00:17:50 CDT 2009 +ap/mysql-5.1.39-x86_64-1.txz: Upgraded. + This bumps the version of the shared libraries to .so.16.0.0. +d/perl-5.10.1-x86_64-1.txz: Upgraded. + Compiled against mysql-5.1.39, upgraded to perl-5.10.1, DBD-mysql-4.013, + DBI-1.609, and URI-1.40. +kde/amarok-2.2.0-x86_64-1.txz: Upgraded. +l/qt-4.5_0bd8418-x86_64-1.txz: Upgraded. + This is the KDE Qt 4.5.2-patched git branch, compiled against mysql-5.1.39. +l/redland-1.0.9-x86_64-1.txz: Upgraded. + Compiled against mysql-5.1.39. +l/soprano-2.3.1-x86_64-1.txz: Upgraded. +l/taglib-1.6-x86_64-1.txz: Upgraded. +l/taglib-extras-1.0.1-x86_64-1.txz: Upgraded. +n/openssh-5.3p1-x86_64-1.txz: Upgraded. +n/php-5.2.11-x86_64-1.txz: Upgraded. + This release fixes some possible security issues, all of which have + "unknown impact and attack vectors". + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3291 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3292 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-3293 + (* Security fix *) + Also, thanks to Frank Gingras and Rich Bowen for helping to improve the + syntax in mod_php.conf. +n/samba-3.4.2-x86_64-1.txz: Upgraded. + This update fixes the following security issues. + A misconfigured /etc/passwd with no defined home directory could allow + security restrictions to be bypassed. + mount.cifs could allow a local user to read the first line of an arbitrary + file if installed setuid. (On Slackware, it was not installed setuid) + Specially crafted SMB requests could cause a denial of service. + For more information, see: + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2813 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2948 + http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2009-2906 + (* Security fix *) +testing/packages/gcc-4.4.1/gcc-4.4.1-x86_64-1.txz: Added. +testing/packages/gcc-4.4.1/gcc-g++-4.4.1-x86_64-1.txz: Added. +testing/packages/gcc-4.4.1/gcc-gfortran-4.4.1-x86_64-1.txz: Added. +testing/packages/gcc-4.4.1/gcc-gnat-4.4.1-x86_64-1.txz: Added. +testing/packages/gcc-4.4.1/gcc-java-4.4.1-x86_64-1.txz: Added. +testing/packages/gcc-4.4.1/gcc-objc-4.4.1-x86_64-1.txz: Added. ++--------------------------+ +Sat Sep 19 17:16:06 CDT 2009 +x/mesa-7.5.1-x86_64-1.txz: Upgraded. + Fixed install script to add glxinfo and other programs that were part + of previous Mesa patches. I was under the impression that these no longer + built, and had been deprecated upstream. Thanks to Adam Kirchhoff for + setting me straight on that. ++--------------------------+ +Mon Sep 14 01:38:35 CDT 2009 +xap/mozilla-firefox-3.5.3-x86_64-1.txz: Upgraded. + Upgraded to firefox-3.5.3. + This fixes some security issues. + For more information, see: + http://www.mozilla.org/security/known-vulnerabilities/firefox35.html + (* Security fix *) ++--------------------------+ +Fri Sep 11 20:17:06 CDT 2009 +l/seamonkey-solibs-1.1.18-x86_64-2.txz: Rebuilt. + Added libnssutil3.so, as several other libraries in the package depend + on it, and otherwise it is found only in the main seamonkey package + (which sort of defeats the purpose of this one). + Thanks to Grigorios Bouzakis for the bug report. ++--------------------------+ +Mon Sep 7 20:58:42 CDT 2009 +ap/sysstat-9.0.4-x86_64-1.txz: Upgraded. +l/seamonkey-solibs-1.1.18-x86_64-1.txz: + Upgraded to seamonkey-1.1.18 shared libraries. + (* Security fix *) +xap/seamonkey-1.1.18-x86_64-1.txz: Upgraded. + Upgraded to seamonkey-1.1.18. + This release fixes some more security vulnerabilities. + For more information, see: + http://www.mozilla.org/security/known-vulnerabilities/seamonkey11.html + (* Security fix *) ++--------------------------+ +Wed Aug 26 10:00:38 CDT 2009 +Slackware 13.0 x86_64 is released as stable! Thanks to everyone who +helped make this release possible -- see the RELEASE_NOTES for the +credits. The ISOs are off to the replicator. This time it will be a +6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD. +We're taking pre-orders now at store.slackware.com. Please consider +picking up a copy to help support the project. Once again, thanks to +the entire Slackware community for all the help testing and fixing +things and offering suggestions during this development cycle. +As always, have fun and enjoy! -P. +a/aaa_base-13.0-x86_64-2.txz: Rebuilt. + Updated the initial email to root. +extra/xf86-video-intel-alternate/xf86-video-intel-2.8.1-x86_64-1.txz: + Added. +extra/wicd/wicd-1.6.2.1-x86_64-1.txz: Upgraded. + Thanks to Adam Blackburn of the Wicd team working with us on this, + and to macavity for testing the hidden network changes. diff --git a/FILELIST.TXT b/FILELIST.TXT index 1d4c84c0f..63a903b65 100644 --- a/FILELIST.TXT +++ b/FILELIST.TXT @@ -1,39 +1,40 @@ -Wed Aug 26 16:45:17 UTC 2009 +Wed May 19 18:54:09 UTC 2010 Here is the file list for this directory. If you are using a mirror site and find missing or extra files in the disk subdirectories, please have the archive administrator refresh the mirror. -drwxr-xr-x 11 root root 4096 2009-08-26 16:44 . --rw-r--r-- 1 root root 10116 2009-08-26 14:01 ./ANNOUNCE.13_0 +drwxr-xr-x 12 root root 4096 2010-05-19 18:53 . +-rw-r--r-- 1 root root 9697 2010-05-19 08:00 ./ANNOUNCE.13_1 -rw-r--r-- 1 root root 20933 2006-10-02 04:36 ./BOOTING.TXT --rw-r--r-- 1 root root 16707 2009-08-26 00:32 ./CHANGES_AND_HINTS.TXT --rw-r--r-- 1 root root 631081 2009-08-26 15:20 ./CHECKSUMS.md5 --rw-r--r-- 1 root root 197 2009-08-26 15:20 ./CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 18599 2010-05-17 23:07 ./CHANGES_AND_HINTS.TXT +-rw-r--r-- 1 root root 648880 2010-05-19 09:04 ./CHECKSUMS.md5 +-rw-r--r-- 1 root root 198 2010-05-19 09:04 ./CHECKSUMS.md5.asc -rw-r--r-- 1 root root 17976 1994-06-10 02:28 ./COPYING -rw-r--r-- 1 root root 35147 2007-06-30 04:21 ./COPYING3 -rw-r--r-- 1 root root 19531 2009-08-26 02:07 ./COPYRIGHT.TXT -rw-r--r-- 1 root root 616 2006-10-02 04:37 ./CRYPTO_NOTICE.TXT --rw-r--r-- 1 root root 70342 2009-08-26 15:01 ./ChangeLog.txt --rw-r--r-- 1 root root 823491 2009-08-26 15:18 ./FILELIST.TXT +-rw-r--r-- 1 root root 91096 2010-05-19 08:58 ./ChangeLog.txt +-rw-r--r-- 1 root root 851093 2010-05-19 09:02 ./FILELIST.TXT -rw-r--r-- 1 root root 1565 2003-02-26 23:34 ./GPG-KEY --rw-r--r-- 1 root root 518105 2009-08-26 15:15 ./PACKAGES.TXT --rw-r--r-- 1 root root 9634 2009-08-26 02:12 ./README.TXT --rw-r--r-- 1 root root 3723 2009-08-18 22:19 ./README.initrd --rw-r--r-- 1 root root 33350 2009-07-22 22:28 ./README_CRYPT.TXT --rw-r--r-- 1 root root 9068 2009-07-24 22:35 ./README_LVM.TXT +-rw-r--r-- 1 root root 534446 2010-05-19 03:18 ./PACKAGES.TXT +-rw-r--r-- 1 root root 9025 2010-05-19 00:45 ./README.TXT +-rw-r--r-- 1 root root 3650 2010-05-18 21:50 ./README.initrd +-rw-r--r-- 1 root root 33350 2010-05-18 21:22 ./README_CRYPT.TXT +-rw-r--r-- 1 root root 9068 2010-05-18 21:20 ./README_LVM.TXT -rw-r--r-- 1 root root 17384 2009-08-25 06:31 ./README_RAID.TXT --rw-r--r-- 1 root root 7700 2009-08-26 14:09 ./RELEASE_NOTES +-rw-r--r-- 1 root root 5190 2010-05-19 08:02 ./RELEASE_NOTES -rw-r--r-- 1 root root 13855 2008-12-08 18:13 ./SPEAKUP_DOCS.TXT -rw-r--r-- 1 root root 17294 2008-12-08 18:13 ./SPEAK_INSTALL.TXT --rw-r--r-- 1 root root 57204 2009-08-26 14:19 ./Slackware-HOWTO -drwxr-xr-x 18 root root 4096 2009-08-26 15:12 ./extra --rw-r--r-- 1 root root 33318 2009-08-26 15:12 ./extra/CHECKSUMS.md5 --rw-r--r-- 1 root root 197 2009-08-26 15:12 ./extra/CHECKSUMS.md5.asc --rw-r--r-- 1 root root 42466 2009-08-26 15:11 ./extra/FILE_LIST --rw-r--r-- 1 root root 274995 2009-08-26 15:12 ./extra/MANIFEST.bz2 --rw-r--r-- 1 root root 36016 2009-08-26 15:12 ./extra/PACKAGES.TXT +-rw-r--r-- 1 root root 58732 2010-05-18 21:47 ./Slackware-HOWTO +-rw-r--r-- 1 root root 6934 2010-05-18 03:08 ./UPGRADE.TXT +drwxr-xr-x 18 root root 4096 2010-05-14 19:51 ./extra +-rw-r--r-- 1 root root 32963 2010-05-14 19:51 ./extra/CHECKSUMS.md5 +-rw-r--r-- 1 root root 198 2010-05-14 19:51 ./extra/CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 42083 2010-05-14 19:51 ./extra/FILE_LIST +-rw-r--r-- 1 root root 298193 2010-05-14 19:51 ./extra/MANIFEST.bz2 +-rw-r--r-- 1 root root 34532 2010-05-14 19:51 ./extra/PACKAGES.TXT -rw-r--r-- 1 root root 149 2002-02-09 00:18 ./extra/README.TXT drwxr-xr-x 2 root root 20480 2009-08-14 20:40 ./extra/aspell-word-lists -rw-r--r-- 1 root root 171 2008-10-03 20:55 ./extra/aspell-word-lists/aspell-af-0.50_0-noarch-4.txt @@ -279,24 +280,32 @@ drwxr-xr-x 2 root root 20480 2009-08-14 20:40 ./extra/aspell-word-lists -rw-r--r-- 1 root root 166 2008-10-03 20:57 ./extra/aspell-word-lists/aspell-zu-0.50_0-noarch-4.txt -rw-r--r-- 1 root root 489764 2008-10-03 20:57 ./extra/aspell-word-lists/aspell-zu-0.50_0-noarch-4.txz -rw-r--r-- 1 root root 197 2008-10-03 20:57 ./extra/aspell-word-lists/aspell-zu-0.50_0-noarch-4.txz.asc -drwxr-xr-x 2 root root 4096 2009-07-16 02:03 ./extra/bash-completion --rw-r--r-- 1 root root 671 2009-07-15 22:52 ./extra/bash-completion/bash-completion-20060301-noarch-2.txt --rw-r--r-- 1 root root 71528 2009-07-15 22:52 ./extra/bash-completion/bash-completion-20060301-noarch-2.txz --rw-r--r-- 1 root root 197 2009-07-15 22:52 ./extra/bash-completion/bash-completion-20060301-noarch-2.txz.asc +drwxr-xr-x 2 root root 4096 2010-03-12 05:30 ./extra/bash-completion +-rw-r--r-- 1 root root 669 2010-03-12 00:35 ./extra/bash-completion/bash-completion-1.1-noarch-3.txt +-rw-r--r-- 1 root root 95012 2010-03-12 00:35 ./extra/bash-completion/bash-completion-1.1-noarch-3.txz +-rw-r--r-- 1 root root 198 2010-03-12 00:35 ./extra/bash-completion/bash-completion-1.1-noarch-3.txz.asc +drwxr-xr-x 2 root root 4096 2010-05-14 19:51 ./extra/bittornado +-rw-r--r-- 1 root root 444 2010-05-13 22:08 ./extra/bittornado/bittornado-0.3.18-noarch-2.txt +-rw-r--r-- 1 root root 235960 2010-05-13 22:08 ./extra/bittornado/bittornado-0.3.18-noarch-2.txz +-rw-r--r-- 1 root root 198 2010-05-13 22:08 ./extra/bittornado/bittornado-0.3.18-noarch-2.txz.asc drwxr-xr-x 2 root root 4096 2009-05-19 20:54 ./extra/bittorrent -rw-r--r-- 1 root root 1279 2006-02-08 01:38 ./extra/bittorrent/README -rw-r--r-- 1 root root 613 2009-05-01 11:16 ./extra/bittorrent/bittorrent-4.4.0-noarch-3.txt -rw-r--r-- 1 root root 336536 2009-05-01 11:16 ./extra/bittorrent/bittorrent-4.4.0-noarch-3.txz -rw-r--r-- 1 root root 197 2009-05-01 11:16 ./extra/bittorrent/bittorrent-4.4.0-noarch-3.txz.asc -drwxr-xr-x 2 root root 4096 2009-08-21 04:03 ./extra/brltty --rw-r--r-- 1 root root 326 2009-08-20 03:38 ./extra/brltty/brltty-4.0-x86_64-1.txt --rw-r--r-- 1 root root 948368 2009-08-20 03:38 ./extra/brltty/brltty-4.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-20 03:38 ./extra/brltty/brltty-4.0-x86_64-1.txz.asc -lrwxrwxrwx 1 root root 25 2009-08-26 16:30 ./extra/flashplayer-plugin -> source/flashplayer-plugin -drwxr-xr-x 2 root root 4096 2009-08-14 20:41 ./extra/jdk-6 --rw-r--r-- 1 root root 402 2009-08-13 21:17 ./extra/jdk-6/jdk-6u16-x86_64-1.txt --rw-r--r-- 1 root root 69476144 2009-08-13 21:17 ./extra/jdk-6/jdk-6u16-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-13 21:17 ./extra/jdk-6/jdk-6u16-x86_64-1.txz.asc +drwxr-xr-x 2 root root 4096 2010-05-14 19:51 ./extra/brltty +-rw-r--r-- 1 root root 326 2010-05-11 05:18 ./extra/brltty/brltty-4.2-x86_64-1.txt +-rw-r--r-- 1 root root 973460 2010-05-11 05:18 ./extra/brltty/brltty-4.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-11 05:18 ./extra/brltty/brltty-4.2-x86_64-1.txz.asc +drwxr-xr-x 2 root root 4096 2010-05-14 19:51 ./extra/emacspeak +-rw-r--r-- 1 root root 665 2010-05-14 00:04 ./extra/emacspeak/emacspeak-32.0-x86_64-1.txt +-rw-r--r-- 1 root root 5489232 2010-05-14 00:04 ./extra/emacspeak/emacspeak-32.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-14 00:04 ./extra/emacspeak/emacspeak-32.0-x86_64-1.txz.asc +lrwxrwxrwx 1 root root 25 2009-08-23 23:37 ./extra/flashplayer-plugin -> source/flashplayer-plugin +drwxr-xr-x 2 root root 4096 2010-05-09 03:46 ./extra/jdk-6 +-rw-r--r-- 1 root root 402 2010-05-09 01:49 ./extra/jdk-6/jdk-6u20-x86_64-1.txt +-rw-r--r-- 1 root root 68713432 2010-05-09 01:49 ./extra/jdk-6/jdk-6u20-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-09 01:49 ./extra/jdk-6/jdk-6u20-x86_64-1.txz.asc drwxr-xr-x 2 root root 4096 2009-06-19 23:56 ./extra/kde3-compat -rw-r--r-- 1 root root 422 2009-06-19 01:27 ./extra/kde3-compat/arts-1.5.10-x86_64-opt1.txt -rw-r--r-- 1 root root 941508 2009-06-19 01:27 ./extra/kde3-compat/arts-1.5.10-x86_64-opt1.txz @@ -310,46 +319,53 @@ drwxr-xr-x 2 root root 4096 2009-06-19 23:56 ./extra/kde3-compat -rw-r--r-- 1 root root 557 2009-06-19 18:43 ./extra/kde3-compat/qt3-3.3.8b-x86_64-opt2.txt -rw-r--r-- 1 root root 6269156 2009-06-19 18:43 ./extra/kde3-compat/qt3-3.3.8b-x86_64-opt2.txz -rw-r--r-- 1 root root 197 2009-06-19 18:43 ./extra/kde3-compat/qt3-3.3.8b-x86_64-opt2.txz.asc -drwxr-xr-x 2 root root 4096 2009-05-19 20:54 ./extra/mpg123 --rw-r--r-- 1 root root 501 2009-03-17 23:08 ./extra/mpg123/mpg123-0.65-x86_64-1.txt --rw-r--r-- 1 root root 137592 2009-03-17 23:08 ./extra/mpg123/mpg123-0.65-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-17 23:08 ./extra/mpg123/mpg123-0.65-x86_64-1.txz.asc drwxr-xr-x 2 root root 4096 2009-05-19 20:54 ./extra/mplayerplug-in -rw-r--r-- 1 root root 534 2009-05-19 19:32 ./extra/mplayerplug-in/mplayerplug-in-3.55-x86_64-1.txt -rw-r--r-- 1 root root 176148 2009-05-19 19:32 ./extra/mplayerplug-in/mplayerplug-in-3.55-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-05-19 19:32 ./extra/mplayerplug-in/mplayerplug-in-3.55-x86_64-1.txz.asc -drwxr-xr-x 2 root root 4096 2009-05-19 20:54 ./extra/partitionmanager --rw-r--r-- 1 root root 391 2009-01-13 21:35 ./extra/partitionmanager/partitionmanager-1.0.0_BETA1-x86_64-1.txt --rw-r--r-- 1 root root 1541968 2009-01-13 21:35 ./extra/partitionmanager/partitionmanager-1.0.0_BETA1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-01-13 21:35 ./extra/partitionmanager/partitionmanager-1.0.0_BETA1-x86_64-1.txz.asc +drwxr-xr-x 2 root root 4096 2010-05-03 08:59 ./extra/partitionmanager +-rw-r--r-- 1 root root 391 2010-05-03 08:42 ./extra/partitionmanager/partitionmanager-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 423800 2010-05-03 08:42 ./extra/partitionmanager/partitionmanager-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 08:42 ./extra/partitionmanager/partitionmanager-1.0.2-x86_64-1.txz.asc drwxr-xr-x 2 root root 4096 2009-05-19 20:54 ./extra/recordmydesktop -rw-r--r-- 1 root root 675 2009-05-12 22:09 ./extra/recordmydesktop/recordmydesktop-0.3.8.1-x86_64-2.txt -rw-r--r-- 1 root root 128724 2009-05-12 22:09 ./extra/recordmydesktop/recordmydesktop-0.3.8.1-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-12 22:09 ./extra/recordmydesktop/recordmydesktop-0.3.8.1-x86_64-2.txz.asc -drwxr-xr-x 2 root root 4096 2009-07-18 02:15 ./extra/slacktrack +drwxr-xr-x 2 root root 4096 2010-01-24 20:57 ./extra/slacktrack -rw-r--r-- 1 root root 27340 2009-05-15 22:42 ./extra/slacktrack/OVERVIEW --rw-r--r-- 1 root root 464 2009-07-17 19:08 ./extra/slacktrack/slacktrack-2.06-x86_64-1.txt --rw-r--r-- 1 root root 94400 2009-07-17 19:08 ./extra/slacktrack/slacktrack-2.06-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-17 19:08 ./extra/slacktrack/slacktrack-2.06-x86_64-1.txz.asc -drwxr-xr-x 18 root root 4096 2009-08-26 05:02 ./extra/source -drwxr-xr-x 2 root root 4096 2009-07-15 22:32 ./extra/source/bash-completion --rw-r--r-- 1 root root 102357 2006-03-01 16:40 ./extra/source/bash-completion/bash-completion-20060301.tar.bz2 --rw-r--r-- 1 root root 449 2009-07-15 21:46 ./extra/source/bash-completion/bash-completion-xz.diff.gz --rwxr-xr-x 1 root root 1268 2009-07-15 22:51 ./extra/source/bash-completion/bash-completion.SlackBuild --rw-r--r-- 1 root root 224 2004-09-06 20:22 ./extra/source/bash-completion/bash_completion.sh.gz --rw-r--r-- 1 root root 1137 2008-02-11 03:48 ./extra/source/bash-completion/slack-desc +-rw-r--r-- 1 root root 464 2010-01-10 19:28 ./extra/slacktrack/slacktrack-2.07-x86_64-1.txt +-rw-r--r-- 1 root root 94708 2010-01-10 19:28 ./extra/slacktrack/slacktrack-2.07-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-01-10 19:28 ./extra/slacktrack/slacktrack-2.07-x86_64-1.txz.asc +drwxr-xr-x 18 root root 4096 2010-05-14 00:06 ./extra/source +drwxr-xr-x 2 root root 4096 2010-03-08 18:50 ./extra/source/bash-completion +-rw-r--r-- 1 root root 369 2010-03-08 03:05 ./extra/source/bash-completion/bash-completion-1.1-pkgtools_tgxz.diff.gz +-rw-r--r-- 1 root root 135741 2009-10-10 14:47 ./extra/source/bash-completion/bash-completion-1.1.tar.bz2 +-rwxr-xr-x 1 root root 2687 2010-03-08 18:50 ./extra/source/bash-completion/bash-completion.SlackBuild +-rw-r--r-- 1 root root 226 2010-03-05 20:08 ./extra/source/bash-completion/bash_completion.sh.gz +-rw-r--r-- 1 root root 1135 2009-07-15 06:04 ./extra/source/bash-completion/slack-desc +drwxr-xr-x 2 root root 4096 2007-02-10 02:08 ./extra/source/bittornado +-rw-r--r-- 1 root root 159270 2006-12-23 20:52 ./extra/source/bittornado/BitTornado-0.3.18.tar.bz2 +-rwxr-xr-x 1 root root 1026 2010-05-13 22:08 ./extra/source/bittornado/bittornado.SlackBuild +-rw-r--r-- 1 root root 913 2005-07-14 22:53 ./extra/source/bittornado/btdownloadxterm.sh.gz +-rw-r--r-- 1 root root 283 2006-02-08 01:28 ./extra/source/bittornado/doinst.sh.gz +-rw-r--r-- 1 root root 905 2005-01-04 06:25 ./extra/source/bittornado/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 19:16 ./extra/source/bittorrent -rw-r--r-- 1 root root 678768 2006-01-31 20:24 ./extra/source/bittorrent/BitTorrent-4.4.0.tar.bz2 -rw-r--r-- 1 root root 940 2006-02-08 01:07 ./extra/source/bittorrent/bittorrent-xterm.sh.gz -rwxr-xr-x 1 root root 2473 2009-05-19 20:11 ./extra/source/bittorrent/bittorrent.SlackBuild -rw-r--r-- 1 root root 270 2006-02-08 01:08 ./extra/source/bittorrent/doinst.sh.gz -rw-r--r-- 1 root root 1074 2003-09-21 04:50 ./extra/source/bittorrent/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-20 03:22 ./extra/source/brltty --rw-r--r-- 1 root root 1272748 2009-05-15 04:09 ./extra/source/brltty/brltty-4.0.tar.xz --rwxr-xr-x 1 root root 2315 2009-08-20 03:37 ./extra/source/brltty/brltty.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-11 05:15 ./extra/source/brltty +-rw-r--r-- 1 root root 1328272 2010-05-10 10:24 ./extra/source/brltty/brltty-4.2.tar.xz +-rwxr-xr-x 1 root root 4010 2010-05-11 05:18 ./extra/source/brltty/brltty.SlackBuild -rw-r--r-- 1 root root 783 2002-06-07 04:09 ./extra/source/brltty/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-14 01:14 ./extra/source/emacspeak +-rw-r--r-- 1 root root 5606552 2010-05-12 22:35 ./extra/source/emacspeak/emacspeak-32.0.tar.xz +-rw-r--r-- 1 root root 534 2010-05-13 22:18 ./extra/source/emacspeak/emacspeak-32.0.tcl8.5.diff.gz +-rwxr-xr-x 1 root root 4437 2010-05-14 01:14 ./extra/source/emacspeak/emacspeak.SlackBuild +-rw-r--r-- 1 root root 1125 2002-06-07 01:43 ./extra/source/emacspeak/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 19:25 ./extra/source/flashplayer-plugin --rwxr-xr-- 1 root root 5699 2009-08-10 23:52 ./extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild +-rwxr-xr-- 1 root root 5825 2009-12-14 20:27 ./extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild -rw-r--r-- 1 root root 1017 2008-12-16 13:11 ./extra/source/flashplayer-plugin/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 21:29 ./extra/source/grub -rw-r--r-- 1 root root 7697 2009-03-14 03:58 ./extra/source/grub/grub-0.97-x86_64.patch.gz @@ -360,21 +376,22 @@ drwxr-xr-x 2 root root 4096 2009-05-19 21:29 ./extra/source/grub -rw-r--r-- 1 root root 11715 2006-03-25 17:05 ./extra/source/grub/grubconfig-1.28.tar.gz -rw-r--r-- 1 root root 466 2007-06-06 03:32 ./extra/source/grub/grubconfig_localefix.patch.gz -rw-r--r-- 1 root root 959 2005-09-01 15:26 ./extra/source/grub/slack-desc -drwxr-xr-x 3 root root 4096 2009-08-13 21:39 ./extra/source/jdk-6 --r--r--r-- 1 root root 3767 2009-07-02 22:54 ./extra/source/jdk-6/COPYRIGHT --rw-r--r-- 1 root root 270 2009-06-18 02:36 ./extra/source/jdk-6/HOWTO-BUILD-TXZ --r--r--r-- 1 root root 17179 2009-07-02 22:54 ./extra/source/jdk-6/LICENSE --r--r--r-- 1 root root 28329 2009-07-02 22:54 ./extra/source/jdk-6/README.html --r--r--r-- 1 root root 25390 2009-07-02 22:54 ./extra/source/jdk-6/README_ja.html --r--r--r-- 1 root root 20768 2009-07-02 22:54 ./extra/source/jdk-6/README_zh_CN.html --rwxr-xr-x 1 root root 3894 2009-08-13 21:13 ./extra/source/jdk-6/jdk.SlackBuild +drwxr-xr-x 3 root root 4096 2010-05-09 04:39 ./extra/source/jdk-6 +-r--r--r-- 1 root root 3767 2010-04-12 21:24 ./extra/source/jdk-6/COPYRIGHT +-rw-r--r-- 1 root root 270 2010-05-09 01:46 ./extra/source/jdk-6/HOWTO-BUILD-TXZ +-r--r--r-- 1 root root 17179 2010-04-12 21:24 ./extra/source/jdk-6/LICENSE +-r--r--r-- 1 root root 28329 2010-04-12 21:24 ./extra/source/jdk-6/README.html +-r--r--r-- 1 root root 25390 2010-04-12 21:24 ./extra/source/jdk-6/README_ja.html +-r--r--r-- 1 root root 20768 2010-04-12 21:24 ./extra/source/jdk-6/README_zh_CN.html +-r--r--r-- 1 root root 183173 2010-04-12 21:24 ./extra/source/jdk-6/THIRDPARTYLICENSEREADME.txt +-rwxr-xr-x 1 root root 3900 2010-05-09 01:43 ./extra/source/jdk-6/jdk.SlackBuild drwxr-xr-x 2 root root 4096 2007-09-01 23:13 ./extra/source/jdk-6/profile.d -rwxr-xr-x 1 root root 143 2007-08-29 00:32 ./extra/source/jdk-6/profile.d/jdk.csh -rwxr-xr-x 1 root root 146 2007-08-29 00:33 ./extra/source/jdk-6/profile.d/jdk.sh --r--r--r-- 1 root root 5295 2009-08-06 00:48 ./extra/source/jdk-6/register.html --r--r--r-- 1 root root 5727 2009-08-06 00:48 ./extra/source/jdk-6/register_ja.html --r--r--r-- 1 root root 4905 2009-08-06 00:48 ./extra/source/jdk-6/register_zh_CN.html --rw-r--r-- 1 root root 857 2009-08-13 21:13 ./extra/source/jdk-6/slack-desc +-r--r--r-- 1 root root 5284 2010-05-09 01:43 ./extra/source/jdk-6/register.html +-r--r--r-- 1 root root 5716 2010-05-09 01:43 ./extra/source/jdk-6/register_ja.html +-r--r--r-- 1 root root 4894 2010-05-09 01:43 ./extra/source/jdk-6/register_zh_CN.html +-rw-r--r-- 1 root root 857 2010-05-09 01:43 ./extra/source/jdk-6/slack-desc drwxr-xr-x 6 root root 4096 2009-06-19 18:53 ./extra/source/kde3-compat drwxr-xr-x 2 root root 4096 2008-09-15 18:16 ./extra/source/kde3-compat/arts -rw-r--r-- 1 root root 973382 2008-08-21 18:32 ./extra/source/kde3-compat/arts/arts-1.5.10.tar.bz2 @@ -405,28 +422,23 @@ drwxr-xr-x 2 root root 4096 2002-03-26 03:53 ./extra/source/kde3-compat/qt3 -rw-r--r-- 1 root root 274 2006-01-19 22:12 ./extra/source/kde3-compat/qt3/qt.x86.cflags.diff.gz -rwxr-xr-x 1 root root 6215 2009-06-19 18:39 ./extra/source/kde3-compat/qt3/qt3.SlackBuild -rw-r--r-- 1 root root 1011 2008-08-10 20:31 ./extra/source/kde3-compat/qt3/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 19:16 ./extra/source/mpg123 --rw-r--r-- 1 root root 529154 2007-02-07 09:27 ./extra/source/mpg123/mpg123-0.65.tar.bz2 --rw-r--r-- 1 root root 65 2007-02-07 09:27 ./extra/source/mpg123/mpg123-0.65.tar.bz2.sig --rwxr-xr-x 1 root root 3124 2009-05-19 20:11 ./extra/source/mpg123/mpg123.SlackBuild --rw-r--r-- 1 root root 958 2007-02-14 20:29 ./extra/source/mpg123/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 19:29 ./extra/source/mplayerplug-in -rw-r--r-- 1 root root 281845 2008-06-24 13:19 ./extra/source/mplayerplug-in/mplayerplug-in-3.55.tar.gz -rwxr-xr-- 1 root root 8298 2009-05-19 20:12 ./extra/source/mplayerplug-in/mplayerplug-in.SlackBuild -rw-r--r-- 1 root root 999 2006-11-06 21:20 ./extra/source/mplayerplug-in/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 19:16 ./extra/source/partitionmanager +drwxr-xr-x 2 root root 4096 2010-05-03 07:40 ./extra/source/partitionmanager -rw-r--r-- 1 root root 118 2007-12-24 16:27 ./extra/source/partitionmanager/doinst.sh.gz --rw-r--r-- 1 root root 1406194 2009-01-13 12:00 ./extra/source/partitionmanager/partitionmanager-1.0.0-BETA1.tar.bz2 --rwxr-xr-x 1 root root 2941 2009-05-19 20:12 ./extra/source/partitionmanager/partitionmanager.SlackBuild +-rw-r--r-- 1 root root 292808 2010-04-24 10:00 ./extra/source/partitionmanager/partitionmanager-1.0.2.tar.xz +-rwxr-xr-x 1 root root 3258 2010-05-03 07:41 ./extra/source/partitionmanager/partitionmanager.SlackBuild -rw-r--r-- 1 root root 852 2009-01-13 16:02 ./extra/source/partitionmanager/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:26 ./extra/source/recordmydesktop -rw-r--r-- 1 root root 185528 2008-11-23 15:35 ./extra/source/recordmydesktop/qt-recordmydesktop-0.3.8.tar.gz -rw-r--r-- 1 root root 198732 2008-12-13 17:56 ./extra/source/recordmydesktop/recordmydesktop-0.3.8.1.tar.gz -rwxr-xr-- 1 root root 8324 2009-05-19 20:26 ./extra/source/recordmydesktop/recordmydesktop.SlackBuild --rw-r--r-- 1 root root 1141 2008-12-17 13:36 ./extra/source/recordmydesktop/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-17 19:08 ./extra/source/slacktrack --rw-r--r-- 1 root root 97578 2009-07-17 14:16 ./extra/source/slacktrack/slacktrack-2.06-source.tar.gz --rwxr-xr-x 1 root root 379 2009-07-17 19:08 ./extra/source/slacktrack/slacktrack.SlackBuild +-rw-r--r-- 1 root root 1140 2010-02-19 15:58 ./extra/source/recordmydesktop/slack-desc +drwxr-xr-x 2 root root 4096 2009-12-18 15:40 ./extra/source/slacktrack +-rw-r--r-- 1 root root 98139 2009-12-18 15:30 ./extra/source/slacktrack/slacktrack-2.07-source.tar.gz +-rwxr-xr-x 1 root root 351 2009-12-18 15:37 ./extra/source/slacktrack/slacktrack.SlackBuild drwxr-xr-x 2 root root 4096 2009-06-03 00:11 ./extra/source/tightvnc -rw-r--r-- 1 root root 8109 2009-06-02 21:35 ./extra/source/tightvnc/_tightvnc.tar.gz -rw-r--r-- 1 root root 387 2009-06-02 22:04 ./extra/source/tightvnc/doinst.sh.gz @@ -434,13 +446,14 @@ drwxr-xr-x 2 root root 4096 2009-06-03 00:11 ./extra/source/tightvnc -rw-r--r-- 1 root root 1549080 2009-03-06 05:15 ./extra/source/tightvnc/tightvnc-1.3.10_unixsrc.tar.xz -rwxr-xr-- 1 root root 4093 2009-06-14 18:18 ./extra/source/tightvnc/tightvnc.SlackBuild -rw-r--r-- 1 root root 728 2009-06-02 21:57 ./extra/source/tightvnc/tightvnc.paths-and-perms.diff.gz -drwxr-xr-x 2 root root 4096 2009-08-26 03:57 ./extra/source/wicd +drwxr-xr-x 2 root root 4096 2010-04-02 19:47 ./extra/source/wicd -rw-r--r-- 1 root root 775 2009-06-21 04:34 ./extra/source/wicd/README.SLACKWARE -rw-r--r-- 1 root root 500 2009-05-30 01:47 ./extra/source/wicd/doinst.sh.gz -rw-r--r-- 1 root root 863 2009-06-05 15:22 ./extra/source/wicd/slack-desc --rw-r--r-- 1 root root 385828 2009-08-26 03:56 ./extra/source/wicd/wicd-1.6.2.1.tar.bz2 --rwxr-xr-x 1 root root 2678 2009-08-26 03:40 ./extra/source/wicd/wicd.SlackBuild -drwxr-xr-x 2 root root 4096 2009-03-08 01:06 ./extra/source/xfce-goodies +-rw-r--r-- 1 root root 439 2010-04-02 19:47 ./extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff.gz +-rw-r--r-- 1 root root 475 2010-04-02 19:47 ./extra/source/wicd/wicd-1.7.0-fix_script_bug.diff.gz +-rw-r--r-- 1 root root 411166 2010-01-15 00:55 ./extra/source/wicd/wicd-1.7.0.tar.bz2 +-rwxr-xr-x 1 root root 3091 2010-04-02 19:46 ./extra/source/wicd/wicd.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-19 19:16 ./extra/source/yasm -rw-r--r-- 1 root root 1047 2008-06-16 08:56 ./extra/source/yasm/slack-desc -rw-r--r-- 1 root root 1419273 2009-04-10 06:10 ./extra/source/yasm/yasm-0.8.0.tar.gz @@ -449,267 +462,261 @@ drwxr-xr-x 2 root root 4096 2009-06-03 23:48 ./extra/tightvnc -rw-r--r-- 1 root root 530 2009-06-03 00:11 ./extra/tightvnc/tightvnc-1.3.10-x86_64-1.txt -rw-r--r-- 1 root root 777368 2009-06-03 00:11 ./extra/tightvnc/tightvnc-1.3.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-03 00:11 ./extra/tightvnc/tightvnc-1.3.10-x86_64-1.txz.asc -drwxr-xr-x 2 root root 4096 2009-08-26 15:11 ./extra/wicd +drwxr-xr-x 2 root root 4096 2010-04-30 07:59 ./extra/wicd -rw-r--r-- 1 root root 775 2009-06-21 04:34 ./extra/wicd/README.SLACKWARE --rw-r--r-- 1 root root 407 2009-08-26 04:30 ./extra/wicd/wicd-1.6.2.1-x86_64-1.txt --rw-r--r-- 1 root root 347028 2009-08-26 04:30 ./extra/wicd/wicd-1.6.2.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-26 04:30 ./extra/wicd/wicd-1.6.2.1-x86_64-1.txz.asc -drwxr-xr-x 2 root root 4096 2009-08-26 15:11 ./extra/xf86-video-intel-alternate --rw-r--r-- 1 root root 400 2009-07-16 22:32 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.5.1-x86_64-1.txt --rw-r--r-- 1 root root 215412 2009-07-16 22:32 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.5.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:32 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.5.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-07-16 22:33 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.6.3-x86_64-1.txt --rw-r--r-- 1 root root 232544 2009-07-16 22:33 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.6.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:33 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.6.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-07-16 22:36 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.7.1-x86_64-2.txt --rw-r--r-- 1 root root 236692 2009-07-16 22:36 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.7.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-07-16 22:36 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.7.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 400 2009-08-26 03:50 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.8.1-x86_64-1.txt --rw-r--r-- 1 root root 239368 2009-08-26 03:50 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.8.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-26 03:50 ./extra/xf86-video-intel-alternate/xf86-video-intel-2.8.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 407 2010-04-30 06:01 ./extra/wicd/wicd-1.7.0-x86_64-2.txt +-rw-r--r-- 1 root root 356948 2010-04-30 06:01 ./extra/wicd/wicd-1.7.0-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-04-30 06:01 ./extra/wicd/wicd-1.7.0-x86_64-2.txz.asc drwxr-xr-x 2 root root 4096 2009-05-19 20:54 ./extra/yasm -rw-r--r-- 1 root root 592 2009-05-19 19:50 ./extra/yasm/yasm-0.8.0-x86_64-1.txt -rw-r--r-- 1 root root 650504 2009-05-19 19:50 ./extra/yasm/yasm-0.8.0-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-05-19 19:50 ./extra/yasm/yasm-0.8.0-x86_64-1.txz.asc -drwxr-xr-x 3 root root 4096 2009-08-25 10:30 ./isolinux +drwxr-xr-x 3 root root 4096 2010-05-17 02:11 ./isolinux -rw-r--r-- 1 root root 4739 2009-03-23 19:25 ./isolinux/README.TXT -rw-r--r-- 1 root root 788 2007-03-17 19:50 ./isolinux/README_SPLIT.TXT -rw-r--r-- 1 root root 653 2008-10-28 22:16 ./isolinux/f2.txt --rw-r--r-- 1 root root 10656079 2009-08-25 10:28 ./isolinux/initrd.img +-rw-r--r-- 1 root root 13497671 2010-05-17 02:10 ./isolinux/initrd.img -rw-r--r-- 1 root root 50 2003-01-18 00:02 ./isolinux/iso.sort --rw-r--r-- 1 root root 11559 2008-10-27 11:39 ./isolinux/isolinux.bin +-rw-r--r-- 1 root root 14336 2010-01-19 19:58 ./isolinux/isolinux.bin -rw-r--r-- 1 root root 347 2008-10-28 22:13 ./isolinux/isolinux.cfg --rw-r--r-- 1 root root 568 2009-07-28 19:32 ./isolinux/message.txt +-rw-r--r-- 1 root root 568 2010-05-13 01:46 ./isolinux/message.txt drwxr-xr-x 2 root root 4096 2003-03-17 07:31 ./isolinux/sbootmgr -rwxr-xr-x 1 root root 36064 1995-05-12 01:23 ./isolinux/sbootmgr/RAWRITE.EXE -rw-r--r-- 1 root root 2138 1997-12-01 01:21 ./isolinux/sbootmgr/RAWRITE12.DOC -rwxr-xr-x 1 root root 13052 1997-12-01 01:21 ./isolinux/sbootmgr/RAWRITE12.EXE -lrwxrwxrwx 1 root root 11 2009-08-26 16:31 ./isolinux/sbootmgr/RAWRITE13.EXE -> RAWRITE.EXE +lrwxrwxrwx 1 root root 11 2009-08-23 23:37 ./isolinux/sbootmgr/RAWRITE13.EXE -> RAWRITE.EXE -rw-r--r-- 1 root root 6170 2000-08-29 08:23 ./isolinux/sbootmgr/RAWRITENT.DOC -rwxr-xr-x 1 root root 24576 2000-08-29 08:26 ./isolinux/sbootmgr/RAWRITENT.EXE -rw-r--r-- 1 root root 1291 2003-03-17 07:31 ./isolinux/sbootmgr/README.TXT -rw-r--r-- 1 root root 110592 2003-03-16 08:38 ./isolinux/sbootmgr/sbootmgr.dsk -rw-r--r-- 1 root root 2823 2005-05-02 03:53 ./isolinux/setpkg -drwxr-xr-x 4 root root 4096 2009-08-18 22:40 ./kernels --rw-r--r-- 1 root root 41 2009-07-15 21:54 ./kernels/VERSIONS.TXT -drwxr-xr-x 2 root root 4096 2009-08-17 16:59 ./kernels/huge.s --rw-r--r-- 1 root root 405558 2009-08-17 16:58 ./kernels/huge.s/System.map.gz --rw-r--r-- 1 root root 5004096 2009-08-17 16:58 ./kernels/huge.s/bzImage --rw-r--r-- 1 root root 90685 2009-08-17 16:55 ./kernels/huge.s/config -drwxr-xr-x 2 root root 4096 2009-08-17 17:22 ./kernels/speakup.s --rw-r--r-- 1 root root 410490 2009-08-17 17:05 ./kernels/speakup.s/System.map.gz --rw-r--r-- 1 root root 5037536 2009-08-17 17:05 ./kernels/speakup.s/bzImage --rw-r--r-- 1 root root 91169 2009-08-17 17:03 ./kernels/speakup.s/config --rw-r--r-- 1 root root 11015 2009-08-17 17:13 ./kernels/speakup.s/speakup_decpc.ko +drwxr-xr-x 4 root root 4096 2010-05-13 07:24 ./kernels +-rw-r--r-- 1 root root 41 2010-05-13 07:23 ./kernels/VERSIONS.TXT +drwxr-xr-x 2 root root 4096 2010-05-13 04:13 ./kernels/huge.s +-rw-r--r-- 1 root root 538782 2010-05-13 04:13 ./kernels/huge.s/System.map.gz +-rw-r--r-- 1 root root 5529440 2010-05-13 04:13 ./kernels/huge.s/bzImage +-rw-r--r-- 1 root root 103629 2010-05-13 04:07 ./kernels/huge.s/config +drwxr-xr-x 2 root root 4096 2010-05-01 05:07 ./kernels/speakup.s +-rw-r--r-- 1 root root 544179 2010-05-13 04:16 ./kernels/speakup.s/System.map.gz +-rw-r--r-- 1 root root 5569520 2010-05-13 04:16 ./kernels/speakup.s/bzImage +-rw-r--r-- 1 root root 104113 2010-05-13 04:16 ./kernels/speakup.s/config +-rw-r--r-- 1 root root 15231 2010-05-13 04:17 ./kernels/speakup.s/speakup_decpc.ko +drwxr-xr-x 3 root root 4096 2007-07-02 01:04 ./misc +drwxr-xr-x 3 root root 4096 2006-09-25 06:28 ./misc/slackbook +drwxr-xr-x 11 root root 4096 2006-09-25 06:25 ./misc/slackbook/html +-rw-r--r-- 1 root root 3259 2005-05-12 01:37 ./misc/slackbook/html/TRADEMARKS.html +-rw-r--r-- 1 root root 4361 2005-04-23 19:49 ./misc/slackbook/html/archive-files-bzip2.html +-rw-r--r-- 1 root root 9821 2005-05-10 15:25 ./misc/slackbook/html/archive-files-tar.html +-rw-r--r-- 1 root root 3978 2005-04-23 19:49 ./misc/slackbook/html/archive-files-zip.html +-rw-r--r-- 1 root root 5345 2005-04-23 19:49 ./misc/slackbook/html/archive-files.html +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/basic-network-commands +-rw-r--r-- 1 root root 6838 2005-05-12 01:37 ./misc/slackbook/html/basic-network-commands-dns.html +-rw-r--r-- 1 root root 9768 2005-05-05 12:47 ./misc/slackbook/html/basic-network-commands-email.html +-rw-r--r-- 1 root root 4453 2005-05-05 12:47 ./misc/slackbook/html/basic-network-commands-finger.html +-rw-r--r-- 1 root root 9338 2005-05-12 01:37 ./misc/slackbook/html/basic-network-commands-ftp.html +-rw-r--r-- 1 root root 3890 2005-04-23 19:49 ./misc/slackbook/html/basic-network-commands-ssh.html +-rw-r--r-- 1 root root 6210 2005-05-12 01:37 ./misc/slackbook/html/basic-network-commands-talk.html +-rw-r--r-- 1 root root 6298 2005-05-12 01:37 ./misc/slackbook/html/basic-network-commands-telnet.html +-rw-r--r-- 1 root root 4092 2005-05-05 12:47 ./misc/slackbook/html/basic-network-commands-traceroute.html +-rw-r--r-- 1 root root 7857 2005-05-12 01:37 ./misc/slackbook/html/basic-network-commands-web.html +-rw-r--r-- 1 root root 5418 2005-05-12 01:37 ./misc/slackbook/html/basic-network-commands.html +-rw-r--r-- 1 root root 3421 2005-05-01 07:38 ./misc/slackbook/html/basic-network-commands/elm.png +-rw-r--r-- 1 root root 5204 2005-05-01 07:38 ./misc/slackbook/html/basic-network-commands/links.png +-rw-r--r-- 1 root root 7544 2005-05-01 07:38 ./misc/slackbook/html/basic-network-commands/lynx.png +-rw-r--r-- 1 root root 2489 2005-05-01 07:38 ./misc/slackbook/html/basic-network-commands/mutt.png +-rw-r--r-- 1 root root 4689 2005-05-01 07:38 ./misc/slackbook/html/basic-network-commands/pine.png +-rw-r--r-- 1 root root 491 2005-05-01 07:38 ./misc/slackbook/html/basic-network-commands/talk.png +-rw-r--r-- 1 root root 952 2005-05-01 07:38 ./misc/slackbook/html/basic-network-commands/ytalk.png +-rw-r--r-- 1 root root 13925 2005-05-05 12:47 ./misc/slackbook/html/book-preface.html +-rw-r--r-- 1 root root 517269 2005-05-12 01:38 ./misc/slackbook/html/book.html +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/booting +-rw-r--r-- 1 root root 12607 2005-05-12 01:37 ./misc/slackbook/html/booting-dual.html +-rw-r--r-- 1 root root 4110 2005-04-23 19:49 ./misc/slackbook/html/booting-loadlin.html +-rw-r--r-- 1 root root 8952 2005-05-05 12:47 ./misc/slackbook/html/booting.html +-rw-r--r-- 1 root root 6986 2005-05-01 10:05 ./misc/slackbook/html/booting/setup-lilo-expert-w.png +-rw-r--r-- 1 root root 5824 2005-05-01 10:05 ./misc/slackbook/html/booting/setup-lilo-w.png +-rw-r--r-- 1 root root 2950 2005-04-24 18:51 ./misc/slackbook/html/docbook.css +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/emacs +-rw-r--r-- 1 root root 7301 2005-04-24 12:49 ./misc/slackbook/html/emacs-basic-editing.html +-rw-r--r-- 1 root root 4989 2005-05-05 12:47 ./misc/slackbook/html/emacs-buffers.html +-rw-r--r-- 1 root root 6305 2005-05-05 12:47 ./misc/slackbook/html/emacs-modes.html +-rw-r--r-- 1 root root 4466 2005-05-05 12:47 ./misc/slackbook/html/emacs-saving-files.html +-rw-r--r-- 1 root root 7785 2005-05-12 01:37 ./misc/slackbook/html/emacs.html +-rw-r--r-- 1 root root 7842 2005-04-24 16:56 ./misc/slackbook/html/emacs/emacs.png +-rw-r--r-- 1 root root 9989 2005-05-05 12:47 ./misc/slackbook/html/essential-sysadmin-hardusers.html +-rw-r--r-- 1 root root 10340 2005-05-05 12:47 ./misc/slackbook/html/essential-sysadmin-shutdown.html +-rw-r--r-- 1 root root 18830 2005-05-05 12:47 ./misc/slackbook/html/essential-sysadmin.html +-rw-r--r-- 1 root root 5492 2005-05-12 01:37 ./misc/slackbook/html/file-commands-copymove.html +-rw-r--r-- 1 root root 4959 2005-05-12 01:37 ./misc/slackbook/html/file-commands-creation.html +-rw-r--r-- 1 root root 6218 2005-05-12 01:37 ./misc/slackbook/html/file-commands-deletion.html +-rw-r--r-- 1 root root 4034 2005-04-25 16:19 ./misc/slackbook/html/file-commands-link.html +-rw-r--r-- 1 root root 5596 2005-05-12 01:37 ./misc/slackbook/html/file-commands-output.html +-rw-r--r-- 1 root root 5798 2005-05-12 01:37 ./misc/slackbook/html/file-commands-pagers.html +-rw-r--r-- 1 root root 10160 2005-05-12 01:37 ./misc/slackbook/html/file-commands.html +-rw-r--r-- 1 root root 4506 2005-04-25 15:47 ./misc/slackbook/html/filesystem-structure-links.html +-rw-r--r-- 1 root root 8053 2005-05-12 01:37 ./misc/slackbook/html/filesystem-structure-mounting.html +-rw-r--r-- 1 root root 3139 2005-04-15 07:18 ./misc/slackbook/html/filesystem-structure-nfs.html +-rw-r--r-- 1 root root 10810 2005-05-12 01:37 ./misc/slackbook/html/filesystem-structure-permissions.html +-rw-r--r-- 1 root root 6249 2005-05-05 12:47 ./misc/slackbook/html/filesystem-structure.html +-rw-r--r-- 1 root root 18013 2005-05-05 12:47 ./misc/slackbook/html/glossary.html +-rw-r--r-- 1 root root 21544 2005-05-12 01:37 ./misc/slackbook/html/gpl.html +-rw-r--r-- 1 root root 9377 2006-06-20 20:42 ./misc/slackbook/html/help-online.html +-rw-r--r-- 1 root root 10039 2005-05-12 01:37 ./misc/slackbook/html/help.html +drwxr-xr-x 3 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/imagelib +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/imagelib/admon +-rw-r--r-- 1 root root 338 2005-04-24 14:04 ./misc/slackbook/html/imagelib/admon/note.png +-rw-r--r-- 1 root root 1090 2005-04-24 14:04 ./misc/slackbook/html/imagelib/admon/warning.png +-rw-r--r-- 1 root root 27647 2005-05-12 01:37 ./misc/slackbook/html/index.html +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/installation +-rw-r--r-- 1 root root 9134 2005-04-24 14:04 ./misc/slackbook/html/installation-partitioning.html +-rw-r--r-- 1 root root 13788 2005-05-12 01:37 ./misc/slackbook/html/installation-requirements.html +-rw-r--r-- 1 root root 17913 2005-05-12 01:37 ./misc/slackbook/html/installation-setup.html +-rw-r--r-- 1 root root 6196 2005-05-12 01:37 ./misc/slackbook/html/installation.html +-rw-r--r-- 1 root root 4010 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-bootdisk-w.png +-rw-r--r-- 1 root root 3856 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-font-w.png +-rw-r--r-- 1 root root 3916 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-hardware-clock-w.png +-rw-r--r-- 1 root root 4715 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-help-w.png +-rw-r--r-- 1 root root 7100 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-install-w.png +-rw-r--r-- 1 root root 6442 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-kernel-w.png +-rw-r--r-- 1 root root 4526 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-keymap-w.png +-rw-r--r-- 1 root root 5824 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-lilo-w.png +-rw-r--r-- 1 root root 5356 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-modem-w.png +-rw-r--r-- 1 root root 6516 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-mouse-w.png +-rw-r--r-- 1 root root 5705 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-program-w.png +-rw-r--r-- 1 root root 6817 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-select-w.png +-rw-r--r-- 1 root root 3238 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-source-w.png +-rw-r--r-- 1 root root 3066 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-swap-w.png +-rw-r--r-- 1 root root 3153 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-target-w.png +-rw-r--r-- 1 root root 3593 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-timezone-w.png +-rw-r--r-- 1 root root 6767 2005-05-01 09:28 ./misc/slackbook/html/installation/setup-xwmconfig-w.png +-rw-r--r-- 1 root root 6602 2005-05-05 12:47 ./misc/slackbook/html/introduction-opensource.html +-rw-r--r-- 1 root root 4353 2005-04-15 07:18 ./misc/slackbook/html/introduction-slackware.html +-rw-r--r-- 1 root root 5703 2005-05-05 12:47 ./misc/slackbook/html/introduction.html +-rw-r--r-- 1 root root 9336 2005-05-07 01:34 ./misc/slackbook/html/network-configuration-hardware.html +-rw-r--r-- 1 root root 13205 2005-05-07 01:34 ./misc/slackbook/html/network-configuration-nfs.html +-rw-r--r-- 1 root root 5671 2005-05-12 01:37 ./misc/slackbook/html/network-configuration-ppp.html +-rw-r--r-- 1 root root 14339 2005-05-07 01:34 ./misc/slackbook/html/network-configuration-tcpip.html +-rw-r--r-- 1 root root 8762 2005-05-12 01:37 ./misc/slackbook/html/network-configuration-wireless.html +-rw-r--r-- 1 root root 4503 2005-05-07 01:34 ./misc/slackbook/html/network-configuration.html +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/package-management +-rw-r--r-- 1 root root 5411 2005-05-05 12:47 ./misc/slackbook/html/package-management-making-packages.html +-rw-r--r-- 1 root root 4408 2005-05-12 01:37 ./misc/slackbook/html/package-management-making-tags-and-tagfiles.html +-rw-r--r-- 1 root root 11962 2005-05-12 01:37 ./misc/slackbook/html/package-management-package-utilities.html +-rw-r--r-- 1 root root 5784 2005-05-10 15:35 ./misc/slackbook/html/package-management.html +-rw-r--r-- 1 root root 5817 2005-05-01 10:05 ./misc/slackbook/html/package-management/pkgtool-view-w.png +-rw-r--r-- 1 root root 4784 2005-05-01 10:05 ./misc/slackbook/html/package-management/pkgtool-w.png +-rw-r--r-- 1 root root 4873 2005-04-25 15:56 ./misc/slackbook/html/process-control-foregrounding.html +-rw-r--r-- 1 root root 6934 2005-05-05 12:47 ./misc/slackbook/html/process-control-kill.html +-rw-r--r-- 1 root root 11978 2005-05-09 18:46 ./misc/slackbook/html/process-control-ps.html +-rw-r--r-- 1 root root 7703 2005-04-23 19:49 ./misc/slackbook/html/process-control-top.html +-rw-r--r-- 1 root root 5264 2005-04-25 22:24 ./misc/slackbook/html/process-control.html +-rw-r--r-- 1 root root 5421 2005-05-10 14:53 ./misc/slackbook/html/security-current.html +-rw-r--r-- 1 root root 9659 2005-05-10 14:53 ./misc/slackbook/html/security-host.html +-rw-r--r-- 1 root root 7349 2005-05-12 01:37 ./misc/slackbook/html/security.html +-rw-r--r-- 1 root root 9018 2005-05-05 12:47 ./misc/slackbook/html/shell-bash.html +-rw-r--r-- 1 root root 12375 2005-05-09 16:13 ./misc/slackbook/html/shell-command-line.html +-rw-r--r-- 1 root root 6609 2005-05-12 01:37 ./misc/slackbook/html/shell-vt.html +-rw-r--r-- 1 root root 6764 2005-05-12 01:37 ./misc/slackbook/html/shell.html +-rw-r--r-- 1 root root 3675 2005-05-03 13:25 ./misc/slackbook/html/slackware_logo.png +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/system-configuration +-rw-r--r-- 1 root root 14395 2005-05-12 01:37 ./misc/slackbook/html/system-configuration-kernel.html +-rw-r--r-- 1 root root 21909 2005-05-12 01:37 ./misc/slackbook/html/system-configuration.html +-rw-r--r-- 1 root root 6421 2005-05-01 10:05 ./misc/slackbook/html/system-configuration/make-menuconfig-w.png +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/vi +-rw-r--r-- 1 root root 4292 2005-04-24 14:17 ./misc/slackbook/html/vi-configuration.html +-rw-r--r-- 1 root root 6414 2005-05-12 01:37 ./misc/slackbook/html/vi-keys.html +-rw-r--r-- 1 root root 9546 2005-05-12 01:37 ./misc/slackbook/html/vi-modes.html +-rw-r--r-- 1 root root 4019 2005-04-24 14:17 ./misc/slackbook/html/vi-opening-files.html +-rw-r--r-- 1 root root 3434 2005-04-23 21:44 ./misc/slackbook/html/vi-quitting-vi.html +-rw-r--r-- 1 root root 3698 2005-04-23 19:49 ./misc/slackbook/html/vi-saving-files.html +-rw-r--r-- 1 root root 7379 2005-05-05 12:47 ./misc/slackbook/html/vi.html +-rw-r--r-- 1 root root 3515 2005-05-01 07:38 ./misc/slackbook/html/vi/vim-splitedit.png +drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./misc/slackbook/html/x-window-system +-rw-r--r-- 1 root root 7131 2005-04-23 19:49 ./misc/slackbook/html/x-window-system-xdm.html +-rw-r--r-- 1 root root 5093 2005-05-05 12:47 ./misc/slackbook/html/x-window-system-xinitrc.html +-rw-r--r-- 1 root root 3027 2005-04-23 19:49 ./misc/slackbook/html/x-window-system-xorgsetup.html +-rw-r--r-- 1 root root 6352 2005-05-05 12:47 ./misc/slackbook/html/x-window-system-xwmconfig.html +-rw-r--r-- 1 root root 9651 2005-05-09 14:36 ./misc/slackbook/html/x-window-system.html +-rw-r--r-- 1 root root 4003 2005-05-01 10:05 ./misc/slackbook/html/x-window-system/xorgconfig1-w.png +-rw-r--r-- 1 root root 6872 2005-05-01 10:05 ./misc/slackbook/html/x-window-system/xorgconfig2-w.png +-rw-r--r-- 1 root root 3069 2005-05-01 10:05 ./misc/slackbook/html/x-window-system/xorgconfig3-w.png +-rw-r--r-- 1 root root 5245 2005-05-01 10:05 ./misc/slackbook/html/x-window-system/xorgconfig4-w.png +-rw-r--r-- 1 root root 6767 2005-05-01 10:05 ./misc/slackbook/html/x-window-system/xwmconfig-w.png +-rw-r--r-- 1 root root 3839 2005-05-05 12:47 ./misc/slackbook/html/zipslack-booting.html +-rw-r--r-- 1 root root 4577 2005-05-05 12:47 ./misc/slackbook/html/zipslack-getting.html +-rw-r--r-- 1 root root 4260 2005-04-24 13:06 ./misc/slackbook/html/zipslack.html +-rw-r--r-- 1 root root 1863038 2005-05-16 20:23 ./misc/slackbook/slackbook-2.0.pdf +-rw-r--r-- 1 root root 3223923 2005-05-16 14:53 ./misc/slackbook/slackbook-2.0.ps drwxr-xr-x 3 root root 4096 2009-05-19 20:55 ./pasture -rw-r--r-- 1 root root 0 1993-07-11 05:00 ./pasture/CHECKSUMS.md5.asc drwxr-xr-x 2 root root 4096 2009-05-19 20:16 ./pasture/source -drwxr-xr-x 3 root root 4096 2006-09-25 06:28 ./slackbook -drwxr-xr-x 11 root root 4096 2006-09-25 06:25 ./slackbook/html --rw-r--r-- 1 root root 3259 2005-05-12 01:37 ./slackbook/html/TRADEMARKS.html --rw-r--r-- 1 root root 4361 2005-04-23 19:49 ./slackbook/html/archive-files-bzip2.html --rw-r--r-- 1 root root 9821 2005-05-10 15:25 ./slackbook/html/archive-files-tar.html --rw-r--r-- 1 root root 3978 2005-04-23 19:49 ./slackbook/html/archive-files-zip.html --rw-r--r-- 1 root root 5345 2005-04-23 19:49 ./slackbook/html/archive-files.html -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/basic-network-commands --rw-r--r-- 1 root root 6838 2005-05-12 01:37 ./slackbook/html/basic-network-commands-dns.html --rw-r--r-- 1 root root 9768 2005-05-05 12:47 ./slackbook/html/basic-network-commands-email.html --rw-r--r-- 1 root root 4453 2005-05-05 12:47 ./slackbook/html/basic-network-commands-finger.html --rw-r--r-- 1 root root 9338 2005-05-12 01:37 ./slackbook/html/basic-network-commands-ftp.html --rw-r--r-- 1 root root 3890 2005-04-23 19:49 ./slackbook/html/basic-network-commands-ssh.html --rw-r--r-- 1 root root 6210 2005-05-12 01:37 ./slackbook/html/basic-network-commands-talk.html --rw-r--r-- 1 root root 6298 2005-05-12 01:37 ./slackbook/html/basic-network-commands-telnet.html --rw-r--r-- 1 root root 4092 2005-05-05 12:47 ./slackbook/html/basic-network-commands-traceroute.html --rw-r--r-- 1 root root 7857 2005-05-12 01:37 ./slackbook/html/basic-network-commands-web.html --rw-r--r-- 1 root root 5418 2005-05-12 01:37 ./slackbook/html/basic-network-commands.html --rw-r--r-- 1 root root 3421 2005-05-01 07:38 ./slackbook/html/basic-network-commands/elm.png --rw-r--r-- 1 root root 5204 2005-05-01 07:38 ./slackbook/html/basic-network-commands/links.png --rw-r--r-- 1 root root 7544 2005-05-01 07:38 ./slackbook/html/basic-network-commands/lynx.png --rw-r--r-- 1 root root 2489 2005-05-01 07:38 ./slackbook/html/basic-network-commands/mutt.png --rw-r--r-- 1 root root 4689 2005-05-01 07:38 ./slackbook/html/basic-network-commands/pine.png --rw-r--r-- 1 root root 491 2005-05-01 07:38 ./slackbook/html/basic-network-commands/talk.png --rw-r--r-- 1 root root 952 2005-05-01 07:38 ./slackbook/html/basic-network-commands/ytalk.png --rw-r--r-- 1 root root 13925 2005-05-05 12:47 ./slackbook/html/book-preface.html --rw-r--r-- 1 root root 517269 2005-05-12 01:38 ./slackbook/html/book.html -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/booting --rw-r--r-- 1 root root 12607 2005-05-12 01:37 ./slackbook/html/booting-dual.html --rw-r--r-- 1 root root 4110 2005-04-23 19:49 ./slackbook/html/booting-loadlin.html --rw-r--r-- 1 root root 8952 2005-05-05 12:47 ./slackbook/html/booting.html --rw-r--r-- 1 root root 6986 2005-05-01 10:05 ./slackbook/html/booting/setup-lilo-expert-w.png --rw-r--r-- 1 root root 5824 2005-05-01 10:05 ./slackbook/html/booting/setup-lilo-w.png --rw-r--r-- 1 root root 2950 2005-04-24 18:51 ./slackbook/html/docbook.css -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/emacs --rw-r--r-- 1 root root 7301 2005-04-24 12:49 ./slackbook/html/emacs-basic-editing.html --rw-r--r-- 1 root root 4989 2005-05-05 12:47 ./slackbook/html/emacs-buffers.html --rw-r--r-- 1 root root 6305 2005-05-05 12:47 ./slackbook/html/emacs-modes.html --rw-r--r-- 1 root root 4466 2005-05-05 12:47 ./slackbook/html/emacs-saving-files.html --rw-r--r-- 1 root root 7785 2005-05-12 01:37 ./slackbook/html/emacs.html --rw-r--r-- 1 root root 7842 2005-04-24 16:56 ./slackbook/html/emacs/emacs.png --rw-r--r-- 1 root root 9989 2005-05-05 12:47 ./slackbook/html/essential-sysadmin-hardusers.html --rw-r--r-- 1 root root 10340 2005-05-05 12:47 ./slackbook/html/essential-sysadmin-shutdown.html --rw-r--r-- 1 root root 18830 2005-05-05 12:47 ./slackbook/html/essential-sysadmin.html --rw-r--r-- 1 root root 5492 2005-05-12 01:37 ./slackbook/html/file-commands-copymove.html --rw-r--r-- 1 root root 4959 2005-05-12 01:37 ./slackbook/html/file-commands-creation.html --rw-r--r-- 1 root root 6218 2005-05-12 01:37 ./slackbook/html/file-commands-deletion.html --rw-r--r-- 1 root root 4034 2005-04-25 16:19 ./slackbook/html/file-commands-link.html --rw-r--r-- 1 root root 5596 2005-05-12 01:37 ./slackbook/html/file-commands-output.html --rw-r--r-- 1 root root 5798 2005-05-12 01:37 ./slackbook/html/file-commands-pagers.html --rw-r--r-- 1 root root 10160 2005-05-12 01:37 ./slackbook/html/file-commands.html --rw-r--r-- 1 root root 4506 2005-04-25 15:47 ./slackbook/html/filesystem-structure-links.html --rw-r--r-- 1 root root 8053 2005-05-12 01:37 ./slackbook/html/filesystem-structure-mounting.html --rw-r--r-- 1 root root 3139 2005-04-15 07:18 ./slackbook/html/filesystem-structure-nfs.html --rw-r--r-- 1 root root 10810 2005-05-12 01:37 ./slackbook/html/filesystem-structure-permissions.html --rw-r--r-- 1 root root 6249 2005-05-05 12:47 ./slackbook/html/filesystem-structure.html --rw-r--r-- 1 root root 18013 2005-05-05 12:47 ./slackbook/html/glossary.html --rw-r--r-- 1 root root 21544 2005-05-12 01:37 ./slackbook/html/gpl.html --rw-r--r-- 1 root root 9377 2006-06-20 20:42 ./slackbook/html/help-online.html --rw-r--r-- 1 root root 10039 2005-05-12 01:37 ./slackbook/html/help.html -drwxr-xr-x 3 root root 4096 2006-09-25 06:25 ./slackbook/html/imagelib -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/imagelib/admon --rw-r--r-- 1 root root 338 2005-04-24 14:04 ./slackbook/html/imagelib/admon/note.png --rw-r--r-- 1 root root 1090 2005-04-24 14:04 ./slackbook/html/imagelib/admon/warning.png --rw-r--r-- 1 root root 27647 2005-05-12 01:37 ./slackbook/html/index.html -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/installation --rw-r--r-- 1 root root 9134 2005-04-24 14:04 ./slackbook/html/installation-partitioning.html --rw-r--r-- 1 root root 13788 2005-05-12 01:37 ./slackbook/html/installation-requirements.html --rw-r--r-- 1 root root 17913 2005-05-12 01:37 ./slackbook/html/installation-setup.html --rw-r--r-- 1 root root 6196 2005-05-12 01:37 ./slackbook/html/installation.html --rw-r--r-- 1 root root 4010 2005-05-01 09:28 ./slackbook/html/installation/setup-bootdisk-w.png --rw-r--r-- 1 root root 3856 2005-05-01 09:28 ./slackbook/html/installation/setup-font-w.png --rw-r--r-- 1 root root 3916 2005-05-01 09:28 ./slackbook/html/installation/setup-hardware-clock-w.png --rw-r--r-- 1 root root 4715 2005-05-01 09:28 ./slackbook/html/installation/setup-help-w.png --rw-r--r-- 1 root root 7100 2005-05-01 09:28 ./slackbook/html/installation/setup-install-w.png --rw-r--r-- 1 root root 6442 2005-05-01 09:28 ./slackbook/html/installation/setup-kernel-w.png --rw-r--r-- 1 root root 4526 2005-05-01 09:28 ./slackbook/html/installation/setup-keymap-w.png --rw-r--r-- 1 root root 5824 2005-05-01 09:28 ./slackbook/html/installation/setup-lilo-w.png --rw-r--r-- 1 root root 5356 2005-05-01 09:28 ./slackbook/html/installation/setup-modem-w.png --rw-r--r-- 1 root root 6516 2005-05-01 09:28 ./slackbook/html/installation/setup-mouse-w.png --rw-r--r-- 1 root root 5705 2005-05-01 09:28 ./slackbook/html/installation/setup-program-w.png --rw-r--r-- 1 root root 6817 2005-05-01 09:28 ./slackbook/html/installation/setup-select-w.png --rw-r--r-- 1 root root 3238 2005-05-01 09:28 ./slackbook/html/installation/setup-source-w.png --rw-r--r-- 1 root root 3066 2005-05-01 09:28 ./slackbook/html/installation/setup-swap-w.png --rw-r--r-- 1 root root 3153 2005-05-01 09:28 ./slackbook/html/installation/setup-target-w.png --rw-r--r-- 1 root root 3593 2005-05-01 09:28 ./slackbook/html/installation/setup-timezone-w.png --rw-r--r-- 1 root root 6767 2005-05-01 09:28 ./slackbook/html/installation/setup-xwmconfig-w.png --rw-r--r-- 1 root root 6602 2005-05-05 12:47 ./slackbook/html/introduction-opensource.html --rw-r--r-- 1 root root 4353 2005-04-15 07:18 ./slackbook/html/introduction-slackware.html --rw-r--r-- 1 root root 5703 2005-05-05 12:47 ./slackbook/html/introduction.html --rw-r--r-- 1 root root 9336 2005-05-07 01:34 ./slackbook/html/network-configuration-hardware.html --rw-r--r-- 1 root root 13205 2005-05-07 01:34 ./slackbook/html/network-configuration-nfs.html --rw-r--r-- 1 root root 5671 2005-05-12 01:37 ./slackbook/html/network-configuration-ppp.html --rw-r--r-- 1 root root 14339 2005-05-07 01:34 ./slackbook/html/network-configuration-tcpip.html --rw-r--r-- 1 root root 8762 2005-05-12 01:37 ./slackbook/html/network-configuration-wireless.html --rw-r--r-- 1 root root 4503 2005-05-07 01:34 ./slackbook/html/network-configuration.html -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/package-management --rw-r--r-- 1 root root 5411 2005-05-05 12:47 ./slackbook/html/package-management-making-packages.html --rw-r--r-- 1 root root 4408 2005-05-12 01:37 ./slackbook/html/package-management-making-tags-and-tagfiles.html --rw-r--r-- 1 root root 11962 2005-05-12 01:37 ./slackbook/html/package-management-package-utilities.html --rw-r--r-- 1 root root 5784 2005-05-10 15:35 ./slackbook/html/package-management.html --rw-r--r-- 1 root root 5817 2005-05-01 10:05 ./slackbook/html/package-management/pkgtool-view-w.png --rw-r--r-- 1 root root 4784 2005-05-01 10:05 ./slackbook/html/package-management/pkgtool-w.png --rw-r--r-- 1 root root 4873 2005-04-25 15:56 ./slackbook/html/process-control-foregrounding.html --rw-r--r-- 1 root root 6934 2005-05-05 12:47 ./slackbook/html/process-control-kill.html --rw-r--r-- 1 root root 11978 2005-05-09 18:46 ./slackbook/html/process-control-ps.html --rw-r--r-- 1 root root 7703 2005-04-23 19:49 ./slackbook/html/process-control-top.html --rw-r--r-- 1 root root 5264 2005-04-25 22:24 ./slackbook/html/process-control.html --rw-r--r-- 1 root root 5421 2005-05-10 14:53 ./slackbook/html/security-current.html --rw-r--r-- 1 root root 9659 2005-05-10 14:53 ./slackbook/html/security-host.html --rw-r--r-- 1 root root 7349 2005-05-12 01:37 ./slackbook/html/security.html --rw-r--r-- 1 root root 9018 2005-05-05 12:47 ./slackbook/html/shell-bash.html --rw-r--r-- 1 root root 12375 2005-05-09 16:13 ./slackbook/html/shell-command-line.html --rw-r--r-- 1 root root 6609 2005-05-12 01:37 ./slackbook/html/shell-vt.html --rw-r--r-- 1 root root 6764 2005-05-12 01:37 ./slackbook/html/shell.html --rw-r--r-- 1 root root 3675 2005-05-03 13:25 ./slackbook/html/slackware_logo.png -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/system-configuration --rw-r--r-- 1 root root 14395 2005-05-12 01:37 ./slackbook/html/system-configuration-kernel.html --rw-r--r-- 1 root root 21909 2005-05-12 01:37 ./slackbook/html/system-configuration.html --rw-r--r-- 1 root root 6421 2005-05-01 10:05 ./slackbook/html/system-configuration/make-menuconfig-w.png -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/vi --rw-r--r-- 1 root root 4292 2005-04-24 14:17 ./slackbook/html/vi-configuration.html --rw-r--r-- 1 root root 6414 2005-05-12 01:37 ./slackbook/html/vi-keys.html --rw-r--r-- 1 root root 9546 2005-05-12 01:37 ./slackbook/html/vi-modes.html --rw-r--r-- 1 root root 4019 2005-04-24 14:17 ./slackbook/html/vi-opening-files.html --rw-r--r-- 1 root root 3434 2005-04-23 21:44 ./slackbook/html/vi-quitting-vi.html --rw-r--r-- 1 root root 3698 2005-04-23 19:49 ./slackbook/html/vi-saving-files.html --rw-r--r-- 1 root root 7379 2005-05-05 12:47 ./slackbook/html/vi.html --rw-r--r-- 1 root root 3515 2005-05-01 07:38 ./slackbook/html/vi/vim-splitedit.png -drwxr-xr-x 2 root root 4096 2006-09-25 06:25 ./slackbook/html/x-window-system --rw-r--r-- 1 root root 7131 2005-04-23 19:49 ./slackbook/html/x-window-system-xdm.html --rw-r--r-- 1 root root 5093 2005-05-05 12:47 ./slackbook/html/x-window-system-xinitrc.html --rw-r--r-- 1 root root 3027 2005-04-23 19:49 ./slackbook/html/x-window-system-xorgsetup.html --rw-r--r-- 1 root root 6352 2005-05-05 12:47 ./slackbook/html/x-window-system-xwmconfig.html --rw-r--r-- 1 root root 9651 2005-05-09 14:36 ./slackbook/html/x-window-system.html --rw-r--r-- 1 root root 4003 2005-05-01 10:05 ./slackbook/html/x-window-system/xorgconfig1-w.png --rw-r--r-- 1 root root 6872 2005-05-01 10:05 ./slackbook/html/x-window-system/xorgconfig2-w.png --rw-r--r-- 1 root root 3069 2005-05-01 10:05 ./slackbook/html/x-window-system/xorgconfig3-w.png --rw-r--r-- 1 root root 5245 2005-05-01 10:05 ./slackbook/html/x-window-system/xorgconfig4-w.png --rw-r--r-- 1 root root 6767 2005-05-01 10:05 ./slackbook/html/x-window-system/xwmconfig-w.png --rw-r--r-- 1 root root 3839 2005-05-05 12:47 ./slackbook/html/zipslack-booting.html --rw-r--r-- 1 root root 4577 2005-05-05 12:47 ./slackbook/html/zipslack-getting.html --rw-r--r-- 1 root root 4260 2005-04-24 13:06 ./slackbook/html/zipslack.html --rw-r--r-- 1 root root 1863038 2005-05-16 20:23 ./slackbook/slackbook-2.0.pdf --rw-r--r-- 1 root root 3223923 2005-05-16 14:53 ./slackbook/slackbook-2.0.ps -drwxr-xr-x 17 root root 4096 2009-08-26 15:15 ./slackware64 --rw-r--r-- 1 root root 206654 2009-08-26 15:15 ./slackware64/CHECKSUMS.md5 --rw-r--r-- 1 root root 197 2009-08-26 15:15 ./slackware64/CHECKSUMS.md5.asc --rw-r--r-- 1 root root 255808 2009-08-26 15:12 ./slackware64/FILE_LIST --rw-r--r-- 1 root root 2189265 2009-08-26 15:14 ./slackware64/MANIFEST.bz2 -lrwxrwxrwx 1 root root 15 2009-08-26 16:31 ./slackware64/PACKAGES.TXT -> ../PACKAGES.TXT -drwxr-xr-x 2 root root 24576 2009-08-26 15:12 ./slackware64/a --rw-r--r-- 1 root root 327 2009-08-26 03:23 ./slackware64/a/aaa_base-13.0-x86_64-2.txt --rw-r--r-- 1 root root 10400 2009-08-26 03:23 ./slackware64/a/aaa_base-13.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-26 03:23 ./slackware64/a/aaa_base-13.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 568 2009-08-22 05:49 ./slackware64/a/aaa_elflibs-13.0-x86_64-2.txt --rw-r--r-- 1 root root 3286488 2009-08-22 05:49 ./slackware64/a/aaa_elflibs-13.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-22 05:49 ./slackware64/a/aaa_elflibs-13.0-x86_64-2.txz.asc +drwxr-xr-x 2 root root 4096 2010-05-18 22:40 ./patches +-rw-r--r-- 1 root root 531 2010-05-18 22:40 ./patches/CHECKSUMS.md5 +-rw-r--r-- 1 root root 198 2010-05-18 22:40 ./patches/CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 575 2010-05-18 22:40 ./patches/FILE_LIST +-rw-r--r-- 1 root root 14 2010-05-18 22:40 ./patches/MANIFEST.bz2 +-rw-r--r-- 1 root root 224 2010-05-18 22:40 ./patches/PACKAGES.TXT +drwxr-xr-x 17 root root 4096 2010-05-19 03:18 ./slackware64 +-rw-r--r-- 1 root root 212525 2010-05-19 03:18 ./slackware64/CHECKSUMS.md5 +-rw-r--r-- 1 root root 198 2010-05-19 03:18 ./slackware64/CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 262975 2010-05-19 03:15 ./slackware64/FILE_LIST +-rw-r--r-- 1 root root 2311298 2010-05-19 03:17 ./slackware64/MANIFEST.bz2 +lrwxrwxrwx 1 root root 15 2009-08-23 23:34 ./slackware64/PACKAGES.TXT -> ../PACKAGES.TXT +drwxr-xr-x 2 root root 20480 2010-05-19 03:14 ./slackware64/a +-rw-r--r-- 1 root root 327 2010-05-16 17:45 ./slackware64/a/aaa_base-13.1-x86_64-2.txt +-rw-r--r-- 1 root root 10544 2010-05-16 17:45 ./slackware64/a/aaa_base-13.1-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-16 17:45 ./slackware64/a/aaa_base-13.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 568 2010-05-13 18:41 ./slackware64/a/aaa_elflibs-13.1-x86_64-1.txt +-rw-r--r-- 1 root root 3796116 2010-05-13 18:41 ./slackware64/a/aaa_elflibs-13.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-13 18:41 ./slackware64/a/aaa_elflibs-13.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 505 2009-02-22 16:06 ./slackware64/a/aaa_terminfo-5.7-noarch-1.txt -rw-r--r-- 1 root root 42264 2009-02-22 16:06 ./slackware64/a/aaa_terminfo-5.7-noarch-1.txz -rw-r--r-- 1 root root 197 2009-02-22 16:06 ./slackware64/a/aaa_terminfo-5.7-noarch-1.txz.asc -rw-r--r-- 1 root root 365 2008-09-24 20:28 ./slackware64/a/acl-2.2.47_1-x86_64-1.txt -rw-r--r-- 1 root root 131136 2008-09-24 20:28 ./slackware64/a/acl-2.2.47_1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-24 20:28 ./slackware64/a/acl-2.2.47_1-x86_64-1.txz.asc --rw-r--r-- 1 root root 411 2008-11-26 21:39 ./slackware64/a/acpid-1.0.8-x86_64-2.txt --rw-r--r-- 1 root root 19988 2008-11-26 21:39 ./slackware64/a/acpid-1.0.8-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-11-26 21:39 ./slackware64/a/acpid-1.0.8-x86_64-2.txz.asc +-rw-r--r-- 1 root root 411 2010-05-19 02:50 ./slackware64/a/acpid-2.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 38680 2010-05-19 02:50 ./slackware64/a/acpid-2.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-19 02:50 ./slackware64/a/acpid-2.0.5-x86_64-1.txz.asc -rw-r--r-- 1 root root 554 2009-06-10 01:19 ./slackware64/a/apmd-3.2.2-x86_64-2.txt -rw-r--r-- 1 root root 55280 2009-06-10 01:19 ./slackware64/a/apmd-3.2.2-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-06-10 01:19 ./slackware64/a/apmd-3.2.2-x86_64-2.txz.asc -rw-r--r-- 1 root root 556 2009-03-08 22:21 ./slackware64/a/attr-2.4.43_1-x86_64-1.txt -rw-r--r-- 1 root root 71360 2009-03-08 22:21 ./slackware64/a/attr-2.4.43_1-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-08 22:21 ./slackware64/a/attr-2.4.43_1-x86_64-1.txz.asc --rw-r--r-- 1 root root 510 2008-09-21 15:56 ./slackware64/a/bash-3.1.017-x86_64-2.txt --rw-r--r-- 1 root root 627892 2008-09-21 15:56 ./slackware64/a/bash-3.1.017-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-09-21 15:56 ./slackware64/a/bash-3.1.017-x86_64-2.txz.asc +-rw-r--r-- 1 root root 510 2010-05-15 02:48 ./slackware64/a/bash-4.1.007-x86_64-1.txt +-rw-r--r-- 1 root root 961464 2010-05-15 02:48 ./slackware64/a/bash-4.1.007-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-15 02:48 ./slackware64/a/bash-4.1.007-x86_64-1.txz.asc -rw-r--r-- 1 root root 227 2008-09-21 22:01 ./slackware64/a/bin-11.1-x86_64-1.txt -rw-r--r-- 1 root root 44196 2008-09-21 22:01 ./slackware64/a/bin-11.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-21 22:01 ./slackware64/a/bin-11.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 478 2008-09-21 16:05 ./slackware64/a/bzip2-1.0.5-x86_64-1.txt -rw-r--r-- 1 root root 125916 2008-09-21 16:05 ./slackware64/a/bzip2-1.0.5-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-21 16:05 ./slackware64/a/bzip2-1.0.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 525 2009-05-08 19:52 ./slackware64/a/coreutils-7.4-x86_64-1.txt --rw-r--r-- 1 root root 1892440 2009-05-08 19:52 ./slackware64/a/coreutils-7.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-05-08 19:52 ./slackware64/a/coreutils-7.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 525 2010-05-11 20:53 ./slackware64/a/coreutils-8.5-x86_64-3.txt +-rw-r--r-- 1 root root 2104624 2010-05-11 20:53 ./slackware64/a/coreutils-8.5-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-11 20:53 ./slackware64/a/coreutils-8.5-x86_64-3.txz.asc -rw-r--r-- 1 root root 487 2009-03-16 10:50 ./slackware64/a/cpio-2.9-x86_64-2.txt -rw-r--r-- 1 root root 153068 2009-03-16 10:50 ./slackware64/a/cpio-2.9-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-03-16 10:50 ./slackware64/a/cpio-2.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 579 2009-08-24 03:29 ./slackware64/a/cryptsetup-1.0.7-x86_64-1.txt --rw-r--r-- 1 root root 487912 2009-08-24 03:29 ./slackware64/a/cryptsetup-1.0.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-24 03:29 ./slackware64/a/cryptsetup-1.0.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 644 2009-08-22 05:31 ./slackware64/a/cups-1.3.11-x86_64-1.txt --rw-r--r-- 1 root root 2059832 2009-08-22 05:31 ./slackware64/a/cups-1.3.11-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-22 05:31 ./slackware64/a/cups-1.3.11-x86_64-1.txz.asc --rw-r--r-- 1 root root 280 2009-07-24 23:41 ./slackware64/a/cxxlibs-6.0.10-x86_64-1.txt --rw-r--r-- 1 root root 870244 2009-07-24 23:41 ./slackware64/a/cxxlibs-6.0.10-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-24 23:41 ./slackware64/a/cxxlibs-6.0.10-x86_64-1.txz.asc --rw-r--r-- 1 root root 491 2009-06-09 02:52 ./slackware64/a/dbus-1.2.14-x86_64-1.txt --rw-r--r-- 1 root root 298920 2009-06-09 02:52 ./slackware64/a/dbus-1.2.14-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 02:52 ./slackware64/a/dbus-1.2.14-x86_64-1.txz.asc --rw-r--r-- 1 root root 359 2008-10-21 12:32 ./slackware64/a/dcron-2.3.3-x86_64-6.txt --rw-r--r-- 1 root root 20132 2008-10-21 12:32 ./slackware64/a/dcron-2.3.3-x86_64-6.txz --rw-r--r-- 1 root root 197 2008-10-21 12:32 ./slackware64/a/dcron-2.3.3-x86_64-6.txz.asc --rw-r--r-- 1 root root 518 2008-10-07 17:36 ./slackware64/a/device-mapper-1.02.28-x86_64-1.txt --rw-r--r-- 1 root root 334852 2008-10-07 17:36 ./slackware64/a/device-mapper-1.02.28-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-07 17:36 ./slackware64/a/device-mapper-1.02.28-x86_64-1.txz.asc +-rw-r--r-- 1 root root 620 2010-03-11 20:18 ./slackware64/a/cpufrequtils-007-x86_64-1.txt +-rw-r--r-- 1 root root 35360 2010-03-11 20:18 ./slackware64/a/cpufrequtils-007-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-11 20:18 ./slackware64/a/cpufrequtils-007-x86_64-1.txz.asc +-rw-r--r-- 1 root root 579 2010-04-30 21:56 ./slackware64/a/cryptsetup-1.1.0-x86_64-2.txt +-rw-r--r-- 1 root root 79632 2010-04-30 21:56 ./slackware64/a/cryptsetup-1.1.0-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-04-30 21:56 ./slackware64/a/cryptsetup-1.1.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 644 2010-05-17 07:40 ./slackware64/a/cups-1.4.3-x86_64-3.txt +-rw-r--r-- 1 root root 2043864 2010-05-17 07:40 ./slackware64/a/cups-1.4.3-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-17 07:40 ./slackware64/a/cups-1.4.3-x86_64-3.txz.asc +-rw-r--r-- 1 root root 280 2010-05-13 18:40 ./slackware64/a/cxxlibs-6.0.13-x86_64-2.txt +-rw-r--r-- 1 root root 876964 2010-05-13 18:40 ./slackware64/a/cxxlibs-6.0.13-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-13 18:40 ./slackware64/a/cxxlibs-6.0.13-x86_64-2.txz.asc +-rw-r--r-- 1 root root 491 2010-05-01 02:31 ./slackware64/a/dbus-1.2.24-x86_64-2.txt +-rw-r--r-- 1 root root 304824 2010-05-01 02:31 ./slackware64/a/dbus-1.2.24-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-01 02:31 ./slackware64/a/dbus-1.2.24-x86_64-2.txz.asc +-rw-r--r-- 1 root root 359 2010-02-11 23:27 ./slackware64/a/dcron-4.4-x86_64-1.txt +-rw-r--r-- 1 root root 32528 2010-02-11 23:27 ./slackware64/a/dcron-4.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-11 23:27 ./slackware64/a/dcron-4.4-x86_64-1.txz.asc -rw-r--r-- 1 root root 311 2008-09-25 21:53 ./slackware64/a/devs-2.3.1-noarch-25.txt -rw-r--r-- 1 root root 98596 2008-09-25 21:53 ./slackware64/a/devs-2.3.1-noarch-25.txz -rw-r--r-- 1 root root 197 2008-09-25 21:53 ./slackware64/a/devs-2.3.1-noarch-25.txz.asc @@ -719,115 +726,115 @@ drwxr-xr-x 2 root root 24576 2009-08-26 15:12 ./slackware64/a -rw-r--r-- 1 root root 281 2008-09-23 20:57 ./slackware64/a/dosfstools-2.11-x86_64-1.txt -rw-r--r-- 1 root root 48568 2008-09-23 20:57 ./slackware64/a/dosfstools-2.11-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-23 20:57 ./slackware64/a/dosfstools-2.11-x86_64-1.txz.asc --rw-r--r-- 1 root root 343 2009-07-17 19:29 ./slackware64/a/e2fsprogs-1.41.8-x86_64-1.txt --rw-r--r-- 1 root root 695200 2009-07-17 19:29 ./slackware64/a/e2fsprogs-1.41.8-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-17 19:29 ./slackware64/a/e2fsprogs-1.41.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 343 2010-04-30 04:19 ./slackware64/a/e2fsprogs-1.41.11-x86_64-1.txt +-rw-r--r-- 1 root root 657044 2010-04-30 04:19 ./slackware64/a/e2fsprogs-1.41.11-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 04:19 ./slackware64/a/e2fsprogs-1.41.11-x86_64-1.txz.asc -rw-r--r-- 1 root root 352 2009-06-12 21:01 ./slackware64/a/ed-1.3-x86_64-1.txt -rw-r--r-- 1 root root 63748 2009-06-12 21:01 ./slackware64/a/ed-1.3-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-12 21:01 ./slackware64/a/ed-1.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 430 2008-10-02 11:28 ./slackware64/a/eject-2.1.5-x86_64-1.txt --rw-r--r-- 1 root root 34388 2008-10-02 11:28 ./slackware64/a/eject-2.1.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-02 11:28 ./slackware64/a/eject-2.1.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 430 2010-01-25 22:05 ./slackware64/a/eject-2.1.5-x86_64-2.txt +-rw-r--r-- 1 root root 34532 2010-01-25 22:05 ./slackware64/a/eject-2.1.5-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-01-25 22:05 ./slackware64/a/eject-2.1.5-x86_64-2.txz.asc -rw-r--r-- 1 root root 389 2008-09-23 19:35 ./slackware64/a/elvis-2.2_0-x86_64-2.txt -rw-r--r-- 1 root root 699236 2008-09-23 19:35 ./slackware64/a/elvis-2.2_0-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-09-23 19:35 ./slackware64/a/elvis-2.2_0-x86_64-2.txz.asc --rw-r--r-- 1 root root 203 2009-08-22 19:42 ./slackware64/a/etc-13.0-x86_64-2.txt --rw-r--r-- 1 root root 205512 2009-08-22 19:42 ./slackware64/a/etc-13.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-22 19:42 ./slackware64/a/etc-13.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 225 2009-06-12 22:45 ./slackware64/a/file-5.03-x86_64-1.txt --rw-r--r-- 1 root root 200252 2009-06-12 22:45 ./slackware64/a/file-5.03-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-12 22:45 ./slackware64/a/file-5.03-x86_64-1.txz.asc +-rw-r--r-- 1 root root 203 2010-02-05 23:32 ./slackware64/a/etc-13.013-x86_64-1.txt +-rw-r--r-- 1 root root 207624 2010-02-05 23:32 ./slackware64/a/etc-13.013-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-05 23:32 ./slackware64/a/etc-13.013-x86_64-1.txz.asc +-rw-r--r-- 1 root root 225 2010-02-06 03:08 ./slackware64/a/file-5.04-x86_64-1.txt +-rw-r--r-- 1 root root 203388 2010-02-06 03:08 ./slackware64/a/file-5.04-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-06 03:08 ./slackware64/a/file-5.04-x86_64-1.txz.asc -rw-r--r-- 1 root root 368 2009-06-13 00:03 ./slackware64/a/findutils-4.4.2-x86_64-1.txt -rw-r--r-- 1 root root 414500 2009-06-13 00:03 ./slackware64/a/findutils-4.4.2-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-13 00:03 ./slackware64/a/findutils-4.4.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 271 2008-10-23 11:06 ./slackware64/a/floppy-5.4-x86_64-3.txt -rw-r--r-- 1 root root 350400 2008-10-23 11:06 ./slackware64/a/floppy-5.4-x86_64-3.txz -rw-r--r-- 1 root root 197 2008-10-23 11:06 ./slackware64/a/floppy-5.4-x86_64-3.txz.asc --rw-r--r-- 1 root root 588 2009-05-23 04:34 ./slackware64/a/gawk-3.1.6-x86_64-2.txt --rw-r--r-- 1 root root 758316 2009-05-23 04:34 ./slackware64/a/gawk-3.1.6-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:34 ./slackware64/a/gawk-3.1.6-x86_64-2.txz.asc +-rw-r--r-- 1 root root 588 2010-05-09 18:52 ./slackware64/a/gawk-3.1.8-x86_64-1.txt +-rw-r--r-- 1 root root 796264 2010-05-09 18:52 ./slackware64/a/gawk-3.1.8-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-09 18:52 ./slackware64/a/gawk-3.1.8-x86_64-1.txz.asc -rw-r--r-- 1 root root 498 2008-12-13 17:25 ./slackware64/a/genpower-1.0.5-x86_64-2.txt -rw-r--r-- 1 root root 42648 2008-12-13 17:25 ./slackware64/a/genpower-1.0.5-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-12-13 17:25 ./slackware64/a/genpower-1.0.5-x86_64-2.txz.asc --rw-r--r-- 1 root root 279 2008-09-21 18:25 ./slackware64/a/gettext-0.17-x86_64-2.txt --rw-r--r-- 1 root root 107164 2008-09-21 18:25 ./slackware64/a/gettext-0.17-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-09-21 18:25 ./slackware64/a/gettext-0.17-x86_64-2.txz.asc +-rw-r--r-- 1 root root 279 2010-01-13 00:52 ./slackware64/a/gettext-0.17-x86_64-3.txt +-rw-r--r-- 1 root root 109788 2010-01-13 00:52 ./slackware64/a/gettext-0.17-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-01-13 00:52 ./slackware64/a/gettext-0.17-x86_64-3.txz.asc -rw-r--r-- 1 root root 510 2008-10-02 14:18 ./slackware64/a/getty-ps-2.1.0b-x86_64-1.txt -rw-r--r-- 1 root root 64504 2008-10-02 14:18 ./slackware64/a/getty-ps-2.1.0b-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-02 14:18 ./slackware64/a/getty-ps-2.1.0b-x86_64-1.txz.asc --rw-r--r-- 1 root root 323 2009-04-04 22:46 ./slackware64/a/glibc-solibs-2.9-x86_64-3.txt --rw-r--r-- 1 root root 2358376 2009-04-04 22:46 ./slackware64/a/glibc-solibs-2.9-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-04-04 22:46 ./slackware64/a/glibc-solibs-2.9-x86_64-3.txz.asc --rw-r--r-- 1 root root 500 2009-04-04 22:43 ./slackware64/a/glibc-zoneinfo-2.9-noarch-3.txt --rw-r--r-- 1 root root 155692 2009-04-04 22:43 ./slackware64/a/glibc-zoneinfo-2.9-noarch-3.txz --rw-r--r-- 1 root root 197 2009-04-04 22:43 ./slackware64/a/glibc-zoneinfo-2.9-noarch-3.txz.asc +-rw-r--r-- 1 root root 323 2010-05-13 06:23 ./slackware64/a/glibc-solibs-2.11.1-x86_64-3.txt +-rw-r--r-- 1 root root 2404868 2010-05-13 06:23 ./slackware64/a/glibc-solibs-2.11.1-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-13 06:23 ./slackware64/a/glibc-solibs-2.11.1-x86_64-3.txz.asc +-rw-r--r-- 1 root root 500 2010-05-13 06:22 ./slackware64/a/glibc-zoneinfo-2.11.1-noarch-3.txt +-rw-r--r-- 1 root root 158696 2010-05-13 06:22 ./slackware64/a/glibc-zoneinfo-2.11.1-noarch-3.txz +-rw-r--r-- 1 root root 198 2010-05-13 06:22 ./slackware64/a/glibc-zoneinfo-2.11.1-noarch-3.txz.asc -rw-r--r-- 1 root root 511 2008-10-02 14:25 ./slackware64/a/gpm-1.20.1-x86_64-5.txt -rw-r--r-- 1 root root 190476 2008-10-02 14:25 ./slackware64/a/gpm-1.20.1-x86_64-5.txz -rw-r--r-- 1 root root 197 2008-10-02 14:25 ./slackware64/a/gpm-1.20.1-x86_64-5.txz.asc -rw-r--r-- 1 root root 292 2009-03-04 21:56 ./slackware64/a/grep-2.5.4-x86_64-1.txt -rw-r--r-- 1 root root 228932 2009-03-04 21:56 ./slackware64/a/grep-2.5.4-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-04 21:56 ./slackware64/a/grep-2.5.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 99203 2008-09-21 19:59 ./slackware64/a/gzip-1.3.12-x86_64-1.tgz --rw-r--r-- 1 root root 197 2008-09-21 19:59 ./slackware64/a/gzip-1.3.12-x86_64-1.tgz.asc --rw-r--r-- 1 root root 315 2008-09-21 19:59 ./slackware64/a/gzip-1.3.12-x86_64-1.txt --rw-r--r-- 1 root root 348 2008-12-14 15:46 ./slackware64/a/hdparm-9.3-x86_64-1.txt --rw-r--r-- 1 root root 54808 2008-12-14 15:46 ./slackware64/a/hdparm-9.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-14 15:46 ./slackware64/a/hdparm-9.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 127483 2010-02-09 03:01 ./slackware64/a/gzip-1.4-x86_64-1.tgz +-rw-r--r-- 1 root root 197 2010-02-09 03:01 ./slackware64/a/gzip-1.4-x86_64-1.tgz.asc +-rw-r--r-- 1 root root 315 2010-02-09 03:01 ./slackware64/a/gzip-1.4-x86_64-1.txt +-rw-r--r-- 1 root root 348 2009-10-13 22:55 ./slackware64/a/hdparm-9.27-x86_64-1.txt +-rw-r--r-- 1 root root 61772 2009-10-13 22:55 ./slackware64/a/hdparm-9.27-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-10-13 22:55 ./slackware64/a/hdparm-9.27-x86_64-1.txz.asc -rw-r--r-- 1 root root 466 2009-08-24 08:48 ./slackware64/a/infozip-6.0-x86_64-1.txt -rw-r--r-- 1 root root 405240 2009-08-24 08:48 ./slackware64/a/infozip-6.0-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-08-24 08:48 ./slackware64/a/infozip-6.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 513 2008-10-02 14:34 ./slackware64/a/inotify-tools-3.13-x86_64-1.txt --rw-r--r-- 1 root root 44260 2008-10-02 14:34 ./slackware64/a/inotify-tools-3.13-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-02 14:34 ./slackware64/a/inotify-tools-3.13-x86_64-1.txz.asc +-rw-r--r-- 1 root root 513 2010-05-08 07:59 ./slackware64/a/inotify-tools-3.14-x86_64-1.txt +-rw-r--r-- 1 root root 43908 2010-05-08 07:59 ./slackware64/a/inotify-tools-3.14-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-08 07:59 ./slackware64/a/inotify-tools-3.14-x86_64-1.txz.asc -rwxr-xr-x 1 root root 2897 2009-06-24 22:05 ./slackware64/a/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/a/install.end -rw-r--r-- 1 root root 539 2009-06-12 23:20 ./slackware64/a/jfsutils-1.1.14-x86_64-1.txt -rw-r--r-- 1 root root 199652 2009-06-12 23:20 ./slackware64/a/jfsutils-1.1.14-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-12 23:20 ./slackware64/a/jfsutils-1.1.14-x86_64-1.txz.asc --rw-r--r-- 1 root root 465 2009-08-25 01:23 ./slackware64/a/kbd-1.15-x86_64-3.txt --rw-r--r-- 1 root root 1062556 2009-08-25 01:23 ./slackware64/a/kbd-1.15-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-08-25 01:23 ./slackware64/a/kbd-1.15-x86_64-3.txz.asc --rw-r--r-- 1 root root 344 2009-08-17 07:48 ./slackware64/a/kernel-firmware-2.6.29.6-noarch-2.txt --rw-r--r-- 1 root root 259884 2009-08-17 07:48 ./slackware64/a/kernel-firmware-2.6.29.6-noarch-2.txz --rw-r--r-- 1 root root 197 2009-08-17 07:48 ./slackware64/a/kernel-firmware-2.6.29.6-noarch-2.txz.asc --rw-r--r-- 1 root root 626 2009-08-17 07:48 ./slackware64/a/kernel-generic-2.6.29.6-x86_64-2.txt --rw-r--r-- 1 root root 2813668 2009-08-17 07:48 ./slackware64/a/kernel-generic-2.6.29.6-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-17 07:48 ./slackware64/a/kernel-generic-2.6.29.6-x86_64-2.txz.asc --rw-r--r-- 1 root root 638 2009-08-17 16:59 ./slackware64/a/kernel-huge-2.6.29.6-x86_64-2.txt --rw-r--r-- 1 root root 5281220 2009-08-17 16:59 ./slackware64/a/kernel-huge-2.6.29.6-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-17 16:59 ./slackware64/a/kernel-huge-2.6.29.6-x86_64-2.txz.asc --rw-r--r-- 1 root root 520 2009-08-17 16:55 ./slackware64/a/kernel-modules-2.6.29.6-x86_64-2.txt --rw-r--r-- 1 root root 15431916 2009-08-17 16:55 ./slackware64/a/kernel-modules-2.6.29.6-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-17 16:55 ./slackware64/a/kernel-modules-2.6.29.6-x86_64-2.txz.asc --rw-r--r-- 1 root root 386 2009-05-23 04:40 ./slackware64/a/less-418-x86_64-3.txt --rw-r--r-- 1 root root 110488 2009-05-23 04:40 ./slackware64/a/less-418-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-05-23 04:40 ./slackware64/a/less-418-x86_64-3.txz.asc +-rw-r--r-- 1 root root 465 2010-04-29 06:15 ./slackware64/a/kbd-1.15.2-x86_64-1.txt +-rw-r--r-- 1 root root 1097948 2010-04-29 06:15 ./slackware64/a/kbd-1.15.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 06:15 ./slackware64/a/kbd-1.15.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 344 2010-05-13 03:31 ./slackware64/a/kernel-firmware-2.6.33.4-noarch-1.txt +-rw-r--r-- 1 root root 830364 2010-05-13 03:31 ./slackware64/a/kernel-firmware-2.6.33.4-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-13 03:31 ./slackware64/a/kernel-firmware-2.6.33.4-noarch-1.txz.asc +-rw-r--r-- 1 root root 626 2010-05-13 03:31 ./slackware64/a/kernel-generic-2.6.33.4-x86_64-1.txt +-rw-r--r-- 1 root root 3054128 2010-05-13 03:31 ./slackware64/a/kernel-generic-2.6.33.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-13 03:31 ./slackware64/a/kernel-generic-2.6.33.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 638 2010-05-13 04:13 ./slackware64/a/kernel-huge-2.6.33.4-x86_64-1.txt +-rw-r--r-- 1 root root 5935792 2010-05-13 04:13 ./slackware64/a/kernel-huge-2.6.33.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-13 04:13 ./slackware64/a/kernel-huge-2.6.33.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 520 2010-05-13 04:06 ./slackware64/a/kernel-modules-2.6.33.4-x86_64-1.txt +-rw-r--r-- 1 root root 18307188 2010-05-13 04:06 ./slackware64/a/kernel-modules-2.6.33.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-13 04:06 ./slackware64/a/kernel-modules-2.6.33.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 386 2010-02-09 01:05 ./slackware64/a/less-436-x86_64-1.txt +-rw-r--r-- 1 root root 112032 2010-02-09 01:05 ./slackware64/a/less-436-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-09 01:05 ./slackware64/a/less-436-x86_64-1.txz.asc -rw-r--r-- 1 root root 152 2008-10-02 14:54 ./slackware64/a/lha-114i-x86_64-1.txt -rw-r--r-- 1 root root 47640 2008-10-02 14:54 ./slackware64/a/lha-114i-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-02 14:54 ./slackware64/a/lha-114i-x86_64-1.txz.asc --rw-r--r-- 1 root root 590 2009-02-27 11:49 ./slackware64/a/lilo-22.8-x86_64-14.txt --rw-r--r-- 1 root root 260692 2009-02-27 11:49 ./slackware64/a/lilo-22.8-x86_64-14.txz --rw-r--r-- 1 root root 197 2009-02-27 11:49 ./slackware64/a/lilo-22.8-x86_64-14.txz.asc --rw-r--r-- 1 root root 533 2008-10-02 14:55 ./slackware64/a/logrotate-3.7.4-x86_64-1.txt --rw-r--r-- 1 root root 31948 2008-10-02 14:55 ./slackware64/a/logrotate-3.7.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-02 14:55 ./slackware64/a/logrotate-3.7.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 557 2008-10-07 17:38 ./slackware64/a/lvm2-2.02.40-x86_64-1.txt --rw-r--r-- 1 root root 791744 2008-10-07 17:38 ./slackware64/a/lvm2-2.02.40-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-07 17:38 ./slackware64/a/lvm2-2.02.40-x86_64-1.txz.asc --rw-r--r-- 1 root root 7749 2009-07-15 23:35 ./slackware64/a/maketag --rw-r--r-- 1 root root 7749 2009-07-15 23:35 ./slackware64/a/maketag.ez --rw-r--r-- 1 root root 472 2008-10-02 15:21 ./slackware64/a/mdadm-2.6.4-x86_64-1.txt --rw-r--r-- 1 root root 368524 2008-10-02 15:21 ./slackware64/a/mdadm-2.6.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-02 15:21 ./slackware64/a/mdadm-2.6.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 323 2009-05-23 04:44 ./slackware64/a/minicom-2.1-x86_64-3.txt --rw-r--r-- 1 root root 229152 2009-05-23 04:44 ./slackware64/a/minicom-2.1-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-05-23 04:44 ./slackware64/a/minicom-2.1-x86_64-3.txz.asc --rw-r--r-- 1 root root 529 2009-08-13 20:00 ./slackware64/a/mkinitrd-1.3.4-x86_64-3.txt --rw-r--r-- 1 root root 1106712 2009-08-13 20:00 ./slackware64/a/mkinitrd-1.3.4-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-08-13 20:00 ./slackware64/a/mkinitrd-1.3.4-x86_64-3.txz.asc --rw-r--r-- 1 root root 388 2009-03-13 11:53 ./slackware64/a/module-init-tools-3.6-x86_64-2.txt --rw-r--r-- 1 root root 331584 2009-03-13 11:53 ./slackware64/a/module-init-tools-3.6-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-03-13 11:53 ./slackware64/a/module-init-tools-3.6-x86_64-2.txz.asc +-rw-r--r-- 1 root root 590 2010-02-15 02:09 ./slackware64/a/lilo-22.8-x86_64-15.txt +-rw-r--r-- 1 root root 260752 2010-02-15 02:09 ./slackware64/a/lilo-22.8-x86_64-15.txz +-rw-r--r-- 1 root root 197 2010-02-15 02:09 ./slackware64/a/lilo-22.8-x86_64-15.txz.asc +-rw-r--r-- 1 root root 533 2010-02-12 00:20 ./slackware64/a/logrotate-3.7.8-x86_64-1.txt +-rw-r--r-- 1 root root 36996 2010-02-12 00:20 ./slackware64/a/logrotate-3.7.8-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-12 00:20 ./slackware64/a/logrotate-3.7.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 557 2010-05-04 07:28 ./slackware64/a/lvm2-2.02.64-x86_64-1.txt +-rw-r--r-- 1 root root 1146288 2010-05-04 07:28 ./slackware64/a/lvm2-2.02.64-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 07:28 ./slackware64/a/lvm2-2.02.64-x86_64-1.txz.asc +-rw-r--r-- 1 root root 7837 2010-05-13 07:21 ./slackware64/a/maketag +-rw-r--r-- 1 root root 7837 2010-05-13 07:21 ./slackware64/a/maketag.ez +-rw-r--r-- 1 root root 472 2010-05-17 01:57 ./slackware64/a/mdadm-2.6.9-x86_64-1.txt +-rw-r--r-- 1 root root 406796 2010-05-17 01:57 ./slackware64/a/mdadm-2.6.9-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-17 01:57 ./slackware64/a/mdadm-2.6.9-x86_64-1.txz.asc +-rw-r--r-- 1 root root 323 2010-05-17 22:12 ./slackware64/a/minicom-2.1-x86_64-4.txt +-rw-r--r-- 1 root root 271284 2010-05-17 22:12 ./slackware64/a/minicom-2.1-x86_64-4.txz +-rw-r--r-- 1 root root 198 2010-05-17 22:12 ./slackware64/a/minicom-2.1-x86_64-4.txz.asc +-rw-r--r-- 1 root root 529 2010-05-08 05:29 ./slackware64/a/mkinitrd-1.4.5-x86_64-2.txt +-rw-r--r-- 1 root root 551568 2010-05-08 05:29 ./slackware64/a/mkinitrd-1.4.5-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-08 05:29 ./slackware64/a/mkinitrd-1.4.5-x86_64-2.txz.asc +-rw-r--r-- 1 root root 388 2010-02-06 20:31 ./slackware64/a/module-init-tools-3.11.1-x86_64-1.txt +-rw-r--r-- 1 root root 336044 2010-02-06 20:31 ./slackware64/a/module-init-tools-3.11.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-06 20:31 ./slackware64/a/module-init-tools-3.11.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 487 2008-10-02 19:42 ./slackware64/a/mt-st-0.9b-x86_64-2.txt -rw-r--r-- 1 root root 30000 2008-10-02 19:42 ./slackware64/a/mt-st-0.9b-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-02 19:42 ./slackware64/a/mt-st-0.9b-x86_64-2.txz.asc @@ -837,24 +844,24 @@ drwxr-xr-x 2 root root 24576 2009-08-26 15:12 ./slackware64/a -rw-r--r-- 1 root root 560 2008-09-21 20:07 ./slackware64/a/ncompress-4.2.4-x86_64-1.txt -rw-r--r-- 1 root root 16192 2008-09-21 20:07 ./slackware64/a/ncompress-4.2.4-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-21 20:07 ./slackware64/a/ncompress-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 546 2009-06-12 23:24 ./slackware64/a/ntfs-3g-2009.4.4-x86_64-1.txt --rw-r--r-- 1 root root 181388 2009-06-12 23:24 ./slackware64/a/ntfs-3g-2009.4.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-12 23:24 ./slackware64/a/ntfs-3g-2009.4.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 678 2009-04-29 11:07 ./slackware64/a/openssl-solibs-0.9.8k-x86_64-2.txt --rw-r--r-- 1 root root 715688 2009-04-29 11:07 ./slackware64/a/openssl-solibs-0.9.8k-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-29 11:07 ./slackware64/a/openssl-solibs-0.9.8k-x86_64-2.txz.asc +-rw-r--r-- 1 root root 546 2010-03-13 00:51 ./slackware64/a/ntfs-3g-2010.3.6-x86_64-1.txt +-rw-r--r-- 1 root root 257476 2010-03-13 00:51 ./slackware64/a/ntfs-3g-2010.3.6-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-13 00:51 ./slackware64/a/ntfs-3g-2010.3.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 678 2010-03-29 22:38 ./slackware64/a/openssl-solibs-0.9.8n-x86_64-1.txt +-rw-r--r-- 1 root root 725512 2010-03-29 22:38 ./slackware64/a/openssl-solibs-0.9.8n-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-29 22:38 ./slackware64/a/openssl-solibs-0.9.8n-x86_64-1.txz.asc -rw-r--r-- 1 root root 564 2008-09-23 17:41 ./slackware64/a/patch-2.5.4-x86_64-1.txt -rw-r--r-- 1 root root 58092 2008-09-23 17:41 ./slackware64/a/patch-2.5.4-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-23 17:41 ./slackware64/a/patch-2.5.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 436 2009-08-09 02:53 ./slackware64/a/pciutils-3.1.3-x86_64-1.txt --rw-r--r-- 1 root root 231404 2009-08-09 02:53 ./slackware64/a/pciutils-3.1.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-09 02:53 ./slackware64/a/pciutils-3.1.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 436 2010-02-09 03:45 ./slackware64/a/pciutils-3.1.5-x86_64-1.txt +-rw-r--r-- 1 root root 236560 2010-02-09 03:45 ./slackware64/a/pciutils-3.1.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-09 03:45 ./slackware64/a/pciutils-3.1.5-x86_64-1.txz.asc -rw-r--r-- 1 root root 451 2009-04-21 18:56 ./slackware64/a/pcmciautils-015-x86_64-2.txt -rw-r--r-- 1 root root 27608 2009-04-21 18:56 ./slackware64/a/pcmciautils-015-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-04-21 18:56 ./slackware64/a/pcmciautils-015-x86_64-2.txz.asc --rw-r--r-- 1 root root 41328 2009-08-16 21:55 ./slackware64/a/pkgtools-13.0-noarch-3.tgz --rw-r--r-- 1 root root 197 2009-08-16 21:55 ./slackware64/a/pkgtools-13.0-noarch-3.tgz.asc --rw-r--r-- 1 root root 624 2009-08-16 21:55 ./slackware64/a/pkgtools-13.0-noarch-3.txt +-rw-r--r-- 1 root root 39364 2010-05-11 16:49 ./slackware64/a/pkgtools-13.1-noarch-1.tgz +-rw-r--r-- 1 root root 198 2010-05-11 16:49 ./slackware64/a/pkgtools-13.1-noarch-1.tgz.asc +-rw-r--r-- 1 root root 624 2010-05-11 16:49 ./slackware64/a/pkgtools-13.1-noarch-1.txt -rw-r--r-- 1 root root 282 2009-05-23 06:22 ./slackware64/a/procps-3.2.7-x86_64-3.txt -rw-r--r-- 1 root root 231048 2009-05-23 06:22 ./slackware64/a/procps-3.2.7-x86_64-3.txz -rw-r--r-- 1 root root 197 2009-05-23 06:22 ./slackware64/a/procps-3.2.7-x86_64-3.txz.asc @@ -864,27 +871,27 @@ drwxr-xr-x 2 root root 24576 2009-08-26 15:12 ./slackware64/a -rw-r--r-- 1 root root 476 2009-03-04 20:34 ./slackware64/a/reiserfsprogs-3.6.21-x86_64-1.txt -rw-r--r-- 1 root root 224836 2009-03-04 20:34 ./slackware64/a/reiserfsprogs-3.6.21-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-04 20:34 ./slackware64/a/reiserfsprogs-3.6.21-x86_64-1.txz.asc --rw-r--r-- 1 root root 398 2009-08-08 22:50 ./slackware64/a/rpm2tgz-1.1-x86_64-1.txt --rw-r--r-- 1 root root 4508 2009-08-08 22:50 ./slackware64/a/rpm2tgz-1.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-08 22:50 ./slackware64/a/rpm2tgz-1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 467 2008-10-02 20:41 ./slackware64/a/sdparm-1.01-x86_64-2.txt --rw-r--r-- 1 root root 91424 2008-10-02 20:41 ./slackware64/a/sdparm-1.01-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-02 20:41 ./slackware64/a/sdparm-1.01-x86_64-2.txz.asc --rw-r--r-- 1 root root 408 2008-09-20 20:07 ./slackware64/a/sed-4.1.5-x86_64-1.txt --rw-r--r-- 1 root root 142116 2008-09-20 20:07 ./slackware64/a/sed-4.1.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-09-20 20:07 ./slackware64/a/sed-4.1.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 536 2009-08-01 02:00 ./slackware64/a/shadow-4.0.3-x86_64-18.txt --rw-r--r-- 1 root root 610600 2009-08-01 02:00 ./slackware64/a/shadow-4.0.3-x86_64-18.txz --rw-r--r-- 1 root root 197 2009-08-01 02:00 ./slackware64/a/shadow-4.0.3-x86_64-18.txz.asc +-rw-r--r-- 1 root root 398 2010-04-30 22:47 ./slackware64/a/rpm2tgz-1.2.1-x86_64-1.txt +-rw-r--r-- 1 root root 5260 2010-04-30 22:47 ./slackware64/a/rpm2tgz-1.2.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 22:47 ./slackware64/a/rpm2tgz-1.2.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 467 2010-02-12 02:13 ./slackware64/a/sdparm-1.04-x86_64-1.txt +-rw-r--r-- 1 root root 92524 2010-02-12 02:13 ./slackware64/a/sdparm-1.04-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-12 02:13 ./slackware64/a/sdparm-1.04-x86_64-1.txz.asc +-rw-r--r-- 1 root root 408 2009-12-06 02:15 ./slackware64/a/sed-4.2.1-x86_64-1.txt +-rw-r--r-- 1 root root 173168 2009-12-06 02:15 ./slackware64/a/sed-4.2.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-06 02:15 ./slackware64/a/sed-4.2.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 536 2010-02-28 20:19 ./slackware64/a/shadow-4.1.4.2-x86_64-3.txt +-rw-r--r-- 1 root root 1196168 2010-02-28 20:19 ./slackware64/a/shadow-4.1.4.2-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-28 20:19 ./slackware64/a/shadow-4.1.4.2-x86_64-3.txz.asc -rw-r--r-- 1 root root 627 2009-06-22 18:50 ./slackware64/a/sharutils-4.7-x86_64-1.txt -rw-r--r-- 1 root root 166144 2009-06-22 18:50 ./slackware64/a/sharutils-4.7-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-22 18:50 ./slackware64/a/sharutils-4.7-x86_64-1.txz.asc -rw-r--r-- 1 root root 553 2009-07-18 00:43 ./slackware64/a/slocate-3.1-x86_64-3.txt -rw-r--r-- 1 root root 28148 2009-07-18 00:43 ./slackware64/a/slocate-3.1-x86_64-3.txz -rw-r--r-- 1 root root 197 2009-07-18 00:43 ./slackware64/a/slocate-3.1-x86_64-3.txz.asc --rw-r--r-- 1 root root 710 2008-10-02 20:55 ./slackware64/a/smartmontools-5.38-x86_64-1.txt --rw-r--r-- 1 root root 199512 2008-10-02 20:55 ./slackware64/a/smartmontools-5.38-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-02 20:55 ./slackware64/a/smartmontools-5.38-x86_64-1.txz.asc +-rw-r--r-- 1 root root 710 2010-04-25 23:34 ./slackware64/a/smartmontools-5.39.1-x86_64-1.txt +-rw-r--r-- 1 root root 266680 2010-04-25 23:34 ./slackware64/a/smartmontools-5.39.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-25 23:34 ./slackware64/a/smartmontools-5.39.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 285 2008-10-02 20:57 ./slackware64/a/splitvt-1.6.5-x86_64-1.txt -rw-r--r-- 1 root root 28700 2008-10-02 20:57 ./slackware64/a/splitvt-1.6.5-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-02 20:57 ./slackware64/a/splitvt-1.6.5-x86_64-1.txz.asc @@ -894,22 +901,22 @@ drwxr-xr-x 2 root root 24576 2009-08-26 15:12 ./slackware64/a -rw-r--r-- 1 root root 457 2008-09-23 17:49 ./slackware64/a/sysklogd-1.4.1-x86_64-10.txt -rw-r--r-- 1 root root 57760 2008-09-23 17:49 ./slackware64/a/sysklogd-1.4.1-x86_64-10.txz -rw-r--r-- 1 root root 197 2008-09-23 17:49 ./slackware64/a/sysklogd-1.4.1-x86_64-10.txz.asc --rw-r--r-- 1 root root 518 2008-09-25 21:56 ./slackware64/a/syslinux-3.52-x86_64-1.txt --rw-r--r-- 1 root root 232496 2008-09-25 21:56 ./slackware64/a/syslinux-3.52-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-09-25 21:56 ./slackware64/a/syslinux-3.52-x86_64-1.txz.asc +-rw-r--r-- 1 root root 518 2010-01-25 20:40 ./slackware64/a/syslinux-3.84-x86_64-2.txt +-rw-r--r-- 1 root root 450952 2010-01-25 20:40 ./slackware64/a/syslinux-3.84-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-01-25 20:40 ./slackware64/a/syslinux-3.84-x86_64-2.txz.asc -rw-r--r-- 1 root root 513 2008-09-25 17:31 ./slackware64/a/sysvinit-2.86-x86_64-6.txt -rw-r--r-- 1 root root 60428 2008-09-25 17:31 ./slackware64/a/sysvinit-2.86-x86_64-6.txz -rw-r--r-- 1 root root 197 2008-09-25 17:31 ./slackware64/a/sysvinit-2.86-x86_64-6.txz.asc -rw-r--r-- 1 root root 695 2008-09-23 17:55 ./slackware64/a/sysvinit-functions-8.53-x86_64-2.txt -rw-r--r-- 1 root root 30356 2008-09-23 17:55 ./slackware64/a/sysvinit-functions-8.53-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-09-23 17:55 ./slackware64/a/sysvinit-functions-8.53-x86_64-2.txz.asc --rw-r--r-- 1 root root 379 2009-07-18 01:39 ./slackware64/a/sysvinit-scripts-1.2-noarch-30.txt --rw-r--r-- 1 root root 17316 2009-07-18 01:39 ./slackware64/a/sysvinit-scripts-1.2-noarch-30.txz --rw-r--r-- 1 root root 197 2009-07-18 01:39 ./slackware64/a/sysvinit-scripts-1.2-noarch-30.txz.asc --rw-r--r-- 1 root root 1160 2009-07-15 23:35 ./slackware64/a/tagfile --rw-r--r-- 1 root root 980855 2009-05-06 21:52 ./slackware64/a/tar-1.22-x86_64-2.tgz --rw-r--r-- 1 root root 197 2009-05-06 21:52 ./slackware64/a/tar-1.22-x86_64-2.tgz.asc --rw-r--r-- 1 root root 380 2009-05-06 21:52 ./slackware64/a/tar-1.22-x86_64-2.txt +-rw-r--r-- 1 root root 379 2010-04-30 03:13 ./slackware64/a/sysvinit-scripts-1.2-noarch-32.txt +-rw-r--r-- 1 root root 17344 2010-04-30 03:13 ./slackware64/a/sysvinit-scripts-1.2-noarch-32.txz +-rw-r--r-- 1 root root 198 2010-04-30 03:13 ./slackware64/a/sysvinit-scripts-1.2-noarch-32.txz.asc +-rw-r--r-- 1 root root 1178 2010-05-13 07:21 ./slackware64/a/tagfile +-rw-r--r-- 1 root root 1025407 2010-04-30 02:41 ./slackware64/a/tar-1.23-x86_64-1.tgz +-rw-r--r-- 1 root root 198 2010-04-30 02:41 ./slackware64/a/tar-1.23-x86_64-1.tgz.asc +-rw-r--r-- 1 root root 380 2010-04-30 02:41 ./slackware64/a/tar-1.23-x86_64-1.txt -rw-r--r-- 1 root root 431 2008-10-02 21:05 ./slackware64/a/tcsh-6.15.00-x86_64-1.txt -rw-r--r-- 1 root root 273964 2008-10-02 21:05 ./slackware64/a/tcsh-6.15.00-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-02 21:05 ./slackware64/a/tcsh-6.15.00-x86_64-1.txz.asc @@ -919,49 +926,52 @@ drwxr-xr-x 2 root root 24576 2009-08-26 15:12 ./slackware64/a -rw-r--r-- 1 root root 418 2009-04-11 20:16 ./slackware64/a/tree-1.5.2.2-x86_64-1.txt -rw-r--r-- 1 root root 29464 2009-04-11 20:16 ./slackware64/a/tree-1.5.2.2-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-04-11 20:16 ./slackware64/a/tree-1.5.2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 369 2009-07-15 03:59 ./slackware64/a/udev-141-x86_64-3.txt --rw-r--r-- 1 root root 168680 2009-07-15 03:59 ./slackware64/a/udev-141-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-07-15 03:59 ./slackware64/a/udev-141-x86_64-3.txz.asc +-rw-r--r-- 1 root root 369 2010-04-30 03:04 ./slackware64/a/udev-153-x86_64-1.txt +-rw-r--r-- 1 root root 267032 2010-04-30 03:04 ./slackware64/a/udev-153-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 03:04 ./slackware64/a/udev-153-x86_64-1.txz.asc -rw-r--r-- 1 root root 392 2008-10-02 21:07 ./slackware64/a/unarj-265-x86_64-1.txt -rw-r--r-- 1 root root 16528 2008-10-02 21:07 ./slackware64/a/unarj-265-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-02 21:07 ./slackware64/a/unarj-265-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-08-13 02:56 ./slackware64/a/usbutils-0.82-x86_64-2.txt --rw-r--r-- 1 root root 143932 2009-08-13 02:56 ./slackware64/a/usbutils-0.82-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-13 02:56 ./slackware64/a/usbutils-0.82-x86_64-2.txz.asc +-rw-r--r-- 1 root root 720 2010-04-30 04:04 ./slackware64/a/usb_modeswitch-1.1.2-x86_64-1.txt +-rw-r--r-- 1 root root 37352 2010-04-30 04:04 ./slackware64/a/usb_modeswitch-1.1.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 04:04 ./slackware64/a/usb_modeswitch-1.1.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-04-30 01:58 ./slackware64/a/usbutils-0.87-x86_64-1.txt +-rw-r--r-- 1 root root 156160 2010-04-30 01:58 ./slackware64/a/usbutils-0.87-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 01:58 ./slackware64/a/usbutils-0.87-x86_64-1.txz.asc -rw-r--r-- 1 root root 350 2008-09-28 20:45 ./slackware64/a/utempter-1.1.4-x86_64-1.txt -rw-r--r-- 1 root root 13872 2008-09-28 20:45 ./slackware64/a/utempter-1.1.4-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-28 20:45 ./slackware64/a/utempter-1.1.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 446 2009-05-23 06:43 ./slackware64/a/util-linux-ng-2.14.2-x86_64-2.txt --rw-r--r-- 1 root root 1179332 2009-05-23 06:43 ./slackware64/a/util-linux-ng-2.14.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 06:43 ./slackware64/a/util-linux-ng-2.14.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 446 2010-04-30 04:17 ./slackware64/a/util-linux-ng-2.17.2-x86_64-1.txt +-rw-r--r-- 1 root root 1341524 2010-04-30 04:17 ./slackware64/a/util-linux-ng-2.17.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 04:17 ./slackware64/a/util-linux-ng-2.17.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 582 2009-03-03 23:24 ./slackware64/a/which-2.20-x86_64-1.txt -rw-r--r-- 1 root root 28780 2009-03-03 23:24 ./slackware64/a/which-2.20-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-03 23:24 ./slackware64/a/which-2.20-x86_64-1.txz.asc --rw-r--r-- 1 root root 495 2009-06-13 04:33 ./slackware64/a/xfsprogs-3.0.1-x86_64-1.txt --rw-r--r-- 1 root root 609544 2009-06-13 04:33 ./slackware64/a/xfsprogs-3.0.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-13 04:33 ./slackware64/a/xfsprogs-3.0.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 195779 2009-04-08 20:27 ./slackware64/a/xz-4.999.8beta-x86_64-1.tgz --rw-r--r-- 1 root root 197 2009-04-08 20:27 ./slackware64/a/xz-4.999.8beta-x86_64-1.tgz.asc --rw-r--r-- 1 root root 499 2009-04-08 20:27 ./slackware64/a/xz-4.999.8beta-x86_64-1.txt +-rw-r--r-- 1 root root 495 2010-02-09 21:23 ./slackware64/a/xfsprogs-3.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 652872 2010-02-09 21:23 ./slackware64/a/xfsprogs-3.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-09 21:23 ./slackware64/a/xfsprogs-3.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 397239 2009-11-24 00:25 ./slackware64/a/xz-4.999.9beta-x86_64-1.tgz +-rw-r--r-- 1 root root 197 2009-11-24 00:25 ./slackware64/a/xz-4.999.9beta-x86_64-1.tgz.asc +-rw-r--r-- 1 root root 499 2009-11-24 00:25 ./slackware64/a/xz-4.999.9beta-x86_64-1.txt -rw-r--r-- 1 root root 542 2008-10-02 21:13 ./slackware64/a/zoo-2.10-x86_64-1.txt -rw-r--r-- 1 root root 54236 2008-10-02 21:13 ./slackware64/a/zoo-2.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-02 21:13 ./slackware64/a/zoo-2.10-x86_64-1.txz.asc -drwxr-xr-x 2 root root 16384 2009-08-25 04:55 ./slackware64/ap +drwxr-xr-x 2 root root 16384 2010-05-16 05:15 ./slackware64/ap -rw-r--r-- 1 root root 445 2009-05-23 04:17 ./slackware64/ap/a2ps-4.14-x86_64-4.txt -rw-r--r-- 1 root root 760096 2009-05-23 04:17 ./slackware64/ap/a2ps-4.14-x86_64-4.txz -rw-r--r-- 1 root root 197 2009-05-23 04:17 ./slackware64/ap/a2ps-4.14-x86_64-4.txz.asc -rw-r--r-- 1 root root 599 2008-11-30 13:17 ./slackware64/ap/acct-6.4pre1-x86_64-1.txt -rw-r--r-- 1 root root 87636 2008-11-30 13:17 ./slackware64/ap/acct-6.4pre1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-11-30 13:17 ./slackware64/ap/acct-6.4pre1-x86_64-1.txz.asc --rw-r--r-- 1 root root 625 2009-05-23 04:17 ./slackware64/ap/alsa-utils-1.0.18-x86_64-2.txt --rw-r--r-- 1 root root 912916 2009-05-23 04:17 ./slackware64/ap/alsa-utils-1.0.18-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:17 ./slackware64/ap/alsa-utils-1.0.18-x86_64-2.txz.asc +-rw-r--r-- 1 root root 625 2010-04-29 23:48 ./slackware64/ap/alsa-utils-1.0.23-x86_64-1.txt +-rw-r--r-- 1 root root 925836 2010-04-29 23:48 ./slackware64/ap/alsa-utils-1.0.23-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 23:48 ./slackware64/ap/alsa-utils-1.0.23-x86_64-1.txz.asc -rw-r--r-- 1 root root 275 2008-10-02 22:32 ./slackware64/ap/amp-0.7.6-x86_64-1.txt -rw-r--r-- 1 root root 44568 2008-10-02 22:32 ./slackware64/ap/amp-0.7.6-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-02 22:32 ./slackware64/ap/amp-0.7.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 525 2008-10-02 22:40 ./slackware64/ap/ash-0.4.0-x86_64-1.txt --rw-r--r-- 1 root root 79140 2008-10-02 22:40 ./slackware64/ap/ash-0.4.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-02 22:40 ./slackware64/ap/ash-0.4.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 525 2010-04-25 21:36 ./slackware64/ap/ash-0.4.0-x86_64-2.txt +-rw-r--r-- 1 root root 81548 2010-04-25 21:36 ./slackware64/ap/ash-0.4.0-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-04-25 21:36 ./slackware64/ap/ash-0.4.0-x86_64-2.txz.asc -rw-r--r-- 1 root root 284 2008-10-21 13:01 ./slackware64/ap/at-3.1.10-x86_64-1.txt -rw-r--r-- 1 root root 38884 2008-10-21 13:01 ./slackware64/ap/at-3.1.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-21 13:01 ./slackware64/ap/at-3.1.10-x86_64-1.txz.asc @@ -980,21 +990,18 @@ drwxr-xr-x 2 root root 16384 2009-08-25 04:55 ./slackware64/ap -rw-r--r-- 1 root root 296 2008-10-21 11:12 ./slackware64/ap/cdrdao-1.2.1-x86_64-1.txt -rw-r--r-- 1 root root 305140 2008-10-21 11:12 ./slackware64/ap/cdrdao-1.2.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-21 11:12 ./slackware64/ap/cdrdao-1.2.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 409 2009-05-23 04:20 ./slackware64/ap/cdrtools-2.01.01a57-x86_64-3.txt --rw-r--r-- 1 root root 843064 2009-05-23 04:20 ./slackware64/ap/cdrtools-2.01.01a57-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-05-23 04:20 ./slackware64/ap/cdrtools-2.01.01a57-x86_64-3.txz.asc --rw-r--r-- 1 root root 531 2009-03-09 11:10 ./slackware64/ap/cupsddk-1.2.3-x86_64-1.txt --rw-r--r-- 1 root root 291460 2009-03-09 11:10 ./slackware64/ap/cupsddk-1.2.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-09 11:10 ./slackware64/ap/cupsddk-1.2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 409 2010-04-29 01:19 ./slackware64/ap/cdrtools-2.01.01a78-x86_64-1.txt +-rw-r--r-- 1 root root 813272 2010-04-29 01:19 ./slackware64/ap/cdrtools-2.01.01a78-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 01:19 ./slackware64/ap/cdrtools-2.01.01a78-x86_64-1.txz.asc -rw-r--r-- 1 root root 456 2009-07-22 22:13 ./slackware64/ap/dc3dd-6.12.3-x86_64-1.txt -rw-r--r-- 1 root root 116972 2009-07-22 22:13 ./slackware64/ap/dc3dd-6.12.3-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-07-22 22:13 ./slackware64/ap/dc3dd-6.12.3-x86_64-1.txz.asc -rw-r--r-- 1 root root 409 2008-10-21 13:20 ./slackware64/ap/diffstat-1.43-x86_64-1.txt -rw-r--r-- 1 root root 15012 2008-10-21 13:20 ./slackware64/ap/diffstat-1.43-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-21 13:20 ./slackware64/ap/diffstat-1.43-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2008-09-21 16:13 ./slackware64/ap/diffutils-2.8.1-x86_64-3.txt --rw-r--r-- 1 root root 185580 2008-09-21 16:13 ./slackware64/ap/diffutils-2.8.1-x86_64-3.txz --rw-r--r-- 1 root root 197 2008-09-21 16:13 ./slackware64/ap/diffutils-2.8.1-x86_64-3.txz.asc +-rw-r--r-- 1 root root 283 2010-05-10 02:37 ./slackware64/ap/diffutils-3.0-x86_64-1.txt +-rw-r--r-- 1 root root 313968 2010-05-10 02:37 ./slackware64/ap/diffutils-3.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-10 02:37 ./slackware64/ap/diffutils-3.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 348 2009-06-13 04:42 ./slackware64/ap/dmapi-2.2.10-x86_64-1.txt -rw-r--r-- 1 root root 30804 2009-06-13 04:42 ./slackware64/ap/dmapi-2.2.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-13 04:42 ./slackware64/ap/dmapi-2.2.10-x86_64-1.txz.asc @@ -1010,35 +1017,35 @@ drwxr-xr-x 2 root root 16384 2009-08-25 04:55 ./slackware64/ap -rw-r--r-- 1 root root 603 2008-10-21 20:53 ./slackware64/ap/flac-1.2.1-x86_64-2.txt -rw-r--r-- 1 root root 761720 2008-10-21 20:53 ./slackware64/ap/flac-1.2.1-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-21 20:53 ./slackware64/ap/flac-1.2.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 637 2009-08-18 20:55 ./slackware64/ap/foomatic-filters-4.0.2-x86_64-1.txt --rw-r--r-- 1 root root 105692 2009-08-18 20:55 ./slackware64/ap/foomatic-filters-4.0.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-18 20:55 ./slackware64/ap/foomatic-filters-4.0.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 549 2009-08-22 05:42 ./slackware64/ap/ghostscript-8.70-x86_64-1.txt --rw-r--r-- 1 root root 10665648 2009-08-22 05:42 ./slackware64/ap/ghostscript-8.70-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-22 05:42 ./slackware64/ap/ghostscript-8.70-x86_64-1.txz.asc +-rw-r--r-- 1 root root 637 2010-02-16 08:54 ./slackware64/ap/foomatic-filters-4.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 77004 2010-02-16 08:54 ./slackware64/ap/foomatic-filters-4.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-16 08:54 ./slackware64/ap/foomatic-filters-4.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 549 2010-04-25 21:16 ./slackware64/ap/ghostscript-8.71-x86_64-2.txt +-rw-r--r-- 1 root root 10806596 2010-04-25 21:16 ./slackware64/ap/ghostscript-8.71-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-04-25 21:16 ./slackware64/ap/ghostscript-8.71-x86_64-2.txz.asc -rw-r--r-- 1 root root 368 2008-10-01 19:55 ./slackware64/ap/ghostscript-fonts-std-8.11-noarch-1.txt -rw-r--r-- 1 root root 3517036 2008-10-01 19:55 ./slackware64/ap/ghostscript-fonts-std-8.11-noarch-1.txz -rw-r--r-- 1 root root 197 2008-10-01 19:55 ./slackware64/ap/ghostscript-fonts-std-8.11-noarch-1.txz.asc --rw-r--r-- 1 root root 303 2009-06-09 19:20 ./slackware64/ap/gphoto2-2.4.5-x86_64-1.txt --rw-r--r-- 1 root root 144544 2009-06-09 19:20 ./slackware64/ap/gphoto2-2.4.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 19:20 ./slackware64/ap/gphoto2-2.4.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 303 2010-04-29 02:48 ./slackware64/ap/gphoto2-2.4.9-x86_64-1.txt +-rw-r--r-- 1 root root 162768 2010-04-29 02:48 ./slackware64/ap/gphoto2-2.4.9-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 02:48 ./slackware64/ap/gphoto2-2.4.9-x86_64-1.txz.asc -rw-r--r-- 1 root root 431 2009-03-04 21:45 ./slackware64/ap/groff-1.20.1-x86_64-1.txt -rw-r--r-- 1 root root 1867680 2009-03-04 21:45 ./slackware64/ap/groff-1.20.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-04 21:45 ./slackware64/ap/groff-1.20.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 549 2009-08-22 05:45 ./slackware64/ap/gutenprint-5.2.4-x86_64-1.txt --rw-r--r-- 1 root root 2000156 2009-08-22 05:45 ./slackware64/ap/gutenprint-5.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-22 05:45 ./slackware64/ap/gutenprint-5.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 477 2009-06-09 20:29 ./slackware64/ap/hplip-3.9.4b-x86_64-2.txt --rw-r--r-- 1 root root 9340524 2009-06-09 20:29 ./slackware64/ap/hplip-3.9.4b-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 20:29 ./slackware64/ap/hplip-3.9.4b-x86_64-2.txz.asc +-rw-r--r-- 1 root root 549 2010-02-16 09:02 ./slackware64/ap/gutenprint-5.2.4-x86_64-2.txt +-rw-r--r-- 1 root root 2001944 2010-02-16 09:02 ./slackware64/ap/gutenprint-5.2.4-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-16 09:02 ./slackware64/ap/gutenprint-5.2.4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 477 2010-04-29 18:51 ./slackware64/ap/hplip-3.10.2-x86_64-2.txt +-rw-r--r-- 1 root root 12083844 2010-04-29 18:51 ./slackware64/ap/hplip-3.10.2-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-04-29 18:51 ./slackware64/ap/hplip-3.10.2-x86_64-2.txz.asc -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/ap/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/ap/install.end -rw-r--r-- 1 root root 600 2009-03-16 21:02 ./slackware64/ap/ispell-3.2.06-x86_64-1.txt -rw-r--r-- 1 root root 347684 2009-03-16 21:02 ./slackware64/ap/ispell-3.2.06-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-16 21:02 ./slackware64/ap/ispell-3.2.06-x86_64-1.txz.asc --rw-r--r-- 1 root root 484 2008-10-23 13:25 ./slackware64/ap/jed-0.99_18-x86_64-3.txt --rw-r--r-- 1 root root 499568 2008-10-23 13:25 ./slackware64/ap/jed-0.99_18-x86_64-3.txz --rw-r--r-- 1 root root 197 2008-10-23 13:25 ./slackware64/ap/jed-0.99_18-x86_64-3.txz.asc +-rw-r--r-- 1 root root 484 2010-02-18 23:13 ./slackware64/ap/jed-0.99_19-x86_64-1.txt +-rw-r--r-- 1 root root 527460 2010-02-18 23:13 ./slackware64/ap/jed-0.99_19-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-18 23:13 ./slackware64/ap/jed-0.99_19-x86_64-1.txz.asc -rw-r--r-- 1 root root 145 2009-05-23 04:40 ./slackware64/ap/joe-3.5-x86_64-2.txt -rw-r--r-- 1 root root 288256 2009-05-23 04:40 ./slackware64/ap/joe-3.5-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 04:40 ./slackware64/ap/joe-3.5-x86_64-2.txz.asc @@ -1051,62 +1058,65 @@ drwxr-xr-x 2 root root 16384 2009-08-25 04:55 ./slackware64/ap -rw-r--r-- 1 root root 316 2008-12-12 21:14 ./slackware64/ap/libx86-1.1-x86_64-1.txt -rw-r--r-- 1 root root 59200 2008-12-12 21:14 ./slackware64/ap/libx86-1.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-12-12 21:14 ./slackware64/ap/libx86-1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 701 2009-08-02 20:39 ./slackware64/ap/linuxdoc-tools-0.9.56-x86_64-5.txt --rw-r--r-- 1 root root 4536640 2009-08-02 20:39 ./slackware64/ap/linuxdoc-tools-0.9.56-x86_64-5.txz --rw-r--r-- 1 root root 197 2009-08-02 20:39 ./slackware64/ap/linuxdoc-tools-0.9.56-x86_64-5.txz.asc --rw-r--r-- 1 root root 644 2009-06-22 21:43 ./slackware64/ap/lm_sensors-3.1.1-x86_64-1.txt --rw-r--r-- 1 root root 123048 2009-06-22 21:43 ./slackware64/ap/lm_sensors-3.1.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-22 21:43 ./slackware64/ap/lm_sensors-3.1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 333 2008-09-28 15:34 ./slackware64/ap/lsof-4.78-x86_64-1.txt --rw-r--r-- 1 root root 263356 2008-09-28 15:34 ./slackware64/ap/lsof-4.78-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-09-28 15:34 ./slackware64/ap/lsof-4.78-x86_64-1.txz.asc +-rw-r--r-- 1 root root 701 2010-02-10 21:31 ./slackware64/ap/linuxdoc-tools-0.9.66-x86_64-2.txt +-rw-r--r-- 1 root root 4816884 2010-02-10 21:31 ./slackware64/ap/linuxdoc-tools-0.9.66-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-10 21:31 ./slackware64/ap/linuxdoc-tools-0.9.66-x86_64-2.txz.asc +-rw-r--r-- 1 root root 644 2010-05-03 07:29 ./slackware64/ap/lm_sensors-3.1.2-x86_64-1.txt +-rw-r--r-- 1 root root 127248 2010-05-03 07:29 ./slackware64/ap/lm_sensors-3.1.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 07:29 ./slackware64/ap/lm_sensors-3.1.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 333 2010-03-13 01:05 ./slackware64/ap/lsof-4.83-x86_64-1.txt +-rw-r--r-- 1 root root 277000 2010-03-13 01:05 ./slackware64/ap/lsof-4.83-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-13 01:05 ./slackware64/ap/lsof-4.83-x86_64-1.txz.asc -rw-r--r-- 1 root root 367 2009-03-08 23:30 ./slackware64/ap/lsscsi-0.22-x86_64-1.txt -rw-r--r-- 1 root root 30620 2009-03-08 23:30 ./slackware64/ap/lsscsi-0.22-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-08 23:30 ./slackware64/ap/lsscsi-0.22-x86_64-1.txz.asc -rw-r--r-- 1 root root 339 2008-11-26 18:35 ./slackware64/ap/madplay-0.15.2b-x86_64-2.txt -rw-r--r-- 1 root root 60436 2008-11-26 18:35 ./slackware64/ap/madplay-0.15.2b-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-11-26 18:35 ./slackware64/ap/madplay-0.15.2b-x86_64-2.txz.asc --rw-r--r-- 1 root root 5392 2009-07-22 22:22 ./slackware64/ap/maketag --rw-r--r-- 1 root root 5392 2009-07-22 22:22 ./slackware64/ap/maketag.ez +-rw-r--r-- 1 root root 5404 2010-05-05 07:06 ./slackware64/ap/maketag +-rw-r--r-- 1 root root 5404 2010-05-05 07:06 ./slackware64/ap/maketag.ez -rw-r--r-- 1 root root 447 2009-08-09 02:17 ./slackware64/ap/man-1.6f-x86_64-2.txt -rw-r--r-- 1 root root 211888 2009-08-09 02:17 ./slackware64/ap/man-1.6f-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-08-09 02:17 ./slackware64/ap/man-1.6f-x86_64-2.txz.asc --rw-r--r-- 1 root root 490 2009-08-11 21:36 ./slackware64/ap/man-pages-3.22-noarch-2.txt --rw-r--r-- 1 root root 2440520 2009-08-11 21:36 ./slackware64/ap/man-pages-3.22-noarch-2.txz --rw-r--r-- 1 root root 197 2009-08-11 21:36 ./slackware64/ap/man-pages-3.22-noarch-2.txz.asc --rw-r--r-- 1 root root 451 2009-07-14 21:22 ./slackware64/ap/mc-20090714_git-x86_64-1.txt --rw-r--r-- 1 root root 1507816 2009-07-14 21:22 ./slackware64/ap/mc-20090714_git-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-14 21:22 ./slackware64/ap/mc-20090714_git-x86_64-1.txz.asc +-rw-r--r-- 1 root root 490 2010-02-28 20:30 ./slackware64/ap/man-pages-3.24-noarch-1.txt +-rw-r--r-- 1 root root 2447632 2010-02-28 20:30 ./slackware64/ap/man-pages-3.24-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-28 20:30 ./slackware64/ap/man-pages-3.24-noarch-1.txz.asc +-rw-r--r-- 1 root root 451 2010-05-09 23:19 ./slackware64/ap/mc-20100509_git-x86_64-1.txt +-rw-r--r-- 1 root root 1527984 2010-05-09 23:19 ./slackware64/ap/mc-20100509_git-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-09 23:19 ./slackware64/ap/mc-20100509_git-x86_64-1.txz.asc -rw-r--r-- 1 root root 378 2009-06-25 23:08 ./slackware64/ap/most-5.0.0a-x86_64-2.txt -rw-r--r-- 1 root root 45504 2009-06-25 23:08 ./slackware64/ap/most-5.0.0a-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-06-25 23:08 ./slackware64/ap/most-5.0.0a-x86_64-2.txz.asc --rw-r--r-- 1 root root 459 2008-10-23 18:33 ./slackware64/ap/mpg321-0.2.10-x86_64-2.txt --rw-r--r-- 1 root root 35488 2008-10-23 18:33 ./slackware64/ap/mpg321-0.2.10-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-23 18:33 ./slackware64/ap/mpg321-0.2.10-x86_64-2.txz.asc --rw-r--r-- 1 root root 360 2009-08-04 01:45 ./slackware64/ap/mysql-5.0.84-x86_64-1.txt --rw-r--r-- 1 root root 6027560 2009-08-04 01:45 ./slackware64/ap/mysql-5.0.84-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 01:45 ./slackware64/ap/mysql-5.0.84-x86_64-1.txz.asc --rw-r--r-- 1 root root 415 2009-05-23 04:48 ./slackware64/ap/nano-2.0.9-x86_64-2.txt --rw-r--r-- 1 root root 304420 2009-05-23 04:48 ./slackware64/ap/nano-2.0.9-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:48 ./slackware64/ap/nano-2.0.9-x86_64-2.txz.asc +-rw-r--r-- 1 root root 331 2010-04-14 20:23 ./slackware64/ap/mpg123-1.12.1-x86_64-1.txt +-rw-r--r-- 1 root root 239336 2010-04-14 20:23 ./slackware64/ap/mpg123-1.12.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-14 20:23 ./slackware64/ap/mpg123-1.12.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 360 2010-05-05 19:34 ./slackware64/ap/mysql-5.1.46-x86_64-2.txt +-rw-r--r-- 1 root root 8587140 2010-05-05 19:34 ./slackware64/ap/mysql-5.1.46-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-05 19:34 ./slackware64/ap/mysql-5.1.46-x86_64-2.txz.asc +-rw-r--r-- 1 root root 415 2010-04-20 10:53 ./slackware64/ap/nano-2.2.4-x86_64-1.txt +-rw-r--r-- 1 root root 376072 2010-04-20 10:53 ./slackware64/ap/nano-2.2.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-20 10:53 ./slackware64/ap/nano-2.2.4-x86_64-1.txz.asc -rw-r--r-- 1 root root 514 2009-06-10 01:27 ./slackware64/ap/normalize-0.7.7-x86_64-1.txt -rw-r--r-- 1 root root 60608 2009-06-10 01:27 ./slackware64/ap/normalize-0.7.7-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-10 01:27 ./slackware64/ap/normalize-0.7.7-x86_64-1.txz.asc -rw-r--r-- 1 root root 604 2008-10-23 19:18 ./slackware64/ap/ntfsprogs-2.0.0-x86_64-2.txt -rw-r--r-- 1 root root 273544 2008-10-23 19:18 ./slackware64/ap/ntfsprogs-2.0.0-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-23 19:18 ./slackware64/ap/ntfsprogs-2.0.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 375 2009-06-09 23:36 ./slackware64/ap/pm-utils-1.2.5-x86_64-1.txt --rw-r--r-- 1 root root 41868 2009-06-09 23:36 ./slackware64/ap/pm-utils-1.2.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 23:36 ./slackware64/ap/pm-utils-1.2.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 345 2008-12-12 21:07 ./slackware64/ap/radeontool-1.5-x86_64-1.txt --rw-r--r-- 1 root root 5368 2008-12-12 21:07 ./slackware64/ap/radeontool-1.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-12 21:07 ./slackware64/ap/radeontool-1.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 375 2010-04-30 04:15 ./slackware64/ap/pm-utils-1.3.0-x86_64-1.txt +-rw-r--r-- 1 root root 64828 2010-04-30 04:15 ./slackware64/ap/pm-utils-1.3.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 04:15 ./slackware64/ap/pm-utils-1.3.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 548 2010-05-04 04:42 ./slackware64/ap/powertop-1.11-x86_64-1.txt +-rw-r--r-- 1 root root 58112 2010-05-04 04:42 ./slackware64/ap/powertop-1.11-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 04:42 ./slackware64/ap/powertop-1.11-x86_64-1.txz.asc +-rw-r--r-- 1 root root 345 2010-04-27 21:20 ./slackware64/ap/radeontool-1.6.1-x86_64-1.txt +-rw-r--r-- 1 root root 52080 2010-04-27 21:20 ./slackware64/ap/radeontool-1.6.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 21:20 ./slackware64/ap/radeontool-1.6.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 372 2009-05-23 06:26 ./slackware64/ap/rexima-1.4-x86_64-2.txt -rw-r--r-- 1 root root 16960 2009-05-23 06:26 ./slackware64/ap/rexima-1.4-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 06:26 ./slackware64/ap/rexima-1.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 493 2009-06-04 21:38 ./slackware64/ap/rpm-4.7.0-x86_64-2.txt --rw-r--r-- 1 root root 821012 2009-06-04 21:38 ./slackware64/ap/rpm-4.7.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-04 21:38 ./slackware64/ap/rpm-4.7.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 493 2010-01-13 20:37 ./slackware64/ap/rpm-4.8.0-x86_64-1.txt +-rw-r--r-- 1 root root 804656 2010-01-13 20:37 ./slackware64/ap/rpm-4.8.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-01-13 20:37 ./slackware64/ap/rpm-4.8.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 268 2008-10-23 19:33 ./slackware64/ap/rzip-2.1-x86_64-1.txt -rw-r--r-- 1 root root 20372 2008-10-23 19:33 ./slackware64/ap/rzip-2.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-23 19:33 ./slackware64/ap/rzip-2.1-x86_64-1.txz.asc @@ -1119,68 +1129,68 @@ drwxr-xr-x 2 root root 16384 2009-08-25 04:55 ./slackware64/ap -rw-r--r-- 1 root root 455 2008-12-14 23:45 ./slackware64/ap/seejpeg-1.10-x86_64-1.txt -rw-r--r-- 1 root root 53832 2008-12-14 23:45 ./slackware64/ap/seejpeg-1.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-12-14 23:45 ./slackware64/ap/seejpeg-1.10-x86_64-1.txz.asc --rw-r--r-- 1 root root 51970 2009-07-30 18:04 ./slackware64/ap/slackpkg-2.80.2-noarch-3.tgz --rw-r--r-- 1 root root 197 2009-07-30 18:04 ./slackware64/ap/slackpkg-2.80.2-noarch-3.tgz.asc --rw-r--r-- 1 root root 441 2009-07-30 18:04 ./slackware64/ap/slackpkg-2.80.2-noarch-3.txt --rw-r--r-- 1 root root 256 2009-08-24 07:02 ./slackware64/ap/sox-14.3.0-x86_64-1.txt --rw-r--r-- 1 root root 336520 2009-08-24 07:02 ./slackware64/ap/sox-14.3.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-24 07:02 ./slackware64/ap/sox-14.3.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 484 2009-06-12 23:11 ./slackware64/ap/sqlite-3.6.14.2-x86_64-1.txt --rw-r--r-- 1 root root 307424 2009-06-12 23:11 ./slackware64/ap/sqlite-3.6.14.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-12 23:11 ./slackware64/ap/sqlite-3.6.14.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 414 2008-10-13 19:07 ./slackware64/ap/sudo-1.6.8p12-x86_64-1.txt --rw-r--r-- 1 root root 114472 2008-10-13 19:07 ./slackware64/ap/sudo-1.6.8p12-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-13 19:07 ./slackware64/ap/sudo-1.6.8p12-x86_64-1.txz.asc --rw-r--r-- 1 root root 338 2008-09-28 15:36 ./slackware64/ap/sysstat-7.0.0-x86_64-1.txt --rw-r--r-- 1 root root 100508 2008-09-28 15:36 ./slackware64/ap/sysstat-7.0.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-09-28 15:36 ./slackware64/ap/sysstat-7.0.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 782 2009-07-22 22:22 ./slackware64/ap/tagfile +-rw-r--r-- 1 root root 57975 2010-05-14 23:21 ./slackware64/ap/slackpkg-2.81.1-noarch-1.tgz +-rw-r--r-- 1 root root 198 2010-05-14 23:21 ./slackware64/ap/slackpkg-2.81.1-noarch-1.tgz.asc +-rw-r--r-- 1 root root 441 2010-05-14 23:21 ./slackware64/ap/slackpkg-2.81.1-noarch-1.txt +-rw-r--r-- 1 root root 256 2010-02-17 23:14 ./slackware64/ap/sox-14.3.0-x86_64-3.txt +-rw-r--r-- 1 root root 355216 2010-02-17 23:14 ./slackware64/ap/sox-14.3.0-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-17 23:14 ./slackware64/ap/sox-14.3.0-x86_64-3.txz.asc +-rw-r--r-- 1 root root 484 2010-04-30 00:00 ./slackware64/ap/sqlite-3.6.23.1-x86_64-1.txt +-rw-r--r-- 1 root root 320332 2010-04-30 00:00 ./slackware64/ap/sqlite-3.6.23.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 00:00 ./slackware64/ap/sqlite-3.6.23.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 414 2010-04-20 12:19 ./slackware64/ap/sudo-1.7.2p6-x86_64-1.txt +-rw-r--r-- 1 root root 140844 2010-04-20 12:19 ./slackware64/ap/sudo-1.7.2p6-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-20 12:19 ./slackware64/ap/sudo-1.7.2p6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 444 2010-04-25 23:27 ./slackware64/ap/sysstat-9.0.6.1-x86_64-1.txt +-rw-r--r-- 1 root root 185340 2010-04-25 23:27 ./slackware64/ap/sysstat-9.0.6.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-25 23:27 ./slackware64/ap/sysstat-9.0.6.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 783 2010-05-05 07:06 ./slackware64/ap/tagfile -rw-r--r-- 1 root root 616 2009-05-23 06:39 ./slackware64/ap/texinfo-4.13a-x86_64-3.txt -rw-r--r-- 1 root root 760236 2009-05-23 06:39 ./slackware64/ap/texinfo-4.13a-x86_64-3.txz -rw-r--r-- 1 root root 197 2009-05-23 06:39 ./slackware64/ap/texinfo-4.13a-x86_64-3.txz.asc -rw-r--r-- 1 root root 375 2008-12-12 21:18 ./slackware64/ap/vbetool-1.1-x86_64-1.txt -rw-r--r-- 1 root root 22748 2008-12-12 21:18 ./slackware64/ap/vbetool-1.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-12-12 21:18 ./slackware64/ap/vbetool-1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 385 2009-08-25 01:13 ./slackware64/ap/vim-7.2.245-x86_64-1.txt --rw-r--r-- 1 root root 6243108 2009-08-25 01:13 ./slackware64/ap/vim-7.2.245-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-25 01:13 ./slackware64/ap/vim-7.2.245-x86_64-1.txz.asc +-rw-r--r-- 1 root root 385 2010-05-10 23:04 ./slackware64/ap/vim-7.2.416-x86_64-1.txt +-rw-r--r-- 1 root root 6277344 2010-05-10 23:04 ./slackware64/ap/vim-7.2.416-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-10 23:04 ./slackware64/ap/vim-7.2.416-x86_64-1.txz.asc -rw-r--r-- 1 root root 608 2008-10-23 20:24 ./slackware64/ap/vorbis-tools-1.2.0-x86_64-1.txt -rw-r--r-- 1 root root 138612 2008-10-23 20:24 ./slackware64/ap/vorbis-tools-1.2.0-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-23 20:24 ./slackware64/ap/vorbis-tools-1.2.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 230 2008-10-23 20:36 ./slackware64/ap/workbone-2.40-x86_64-3.txt -rw-r--r-- 1 root root 11892 2008-10-23 20:36 ./slackware64/ap/workbone-2.40-x86_64-3.txz -rw-r--r-- 1 root root 197 2008-10-23 20:36 ./slackware64/ap/workbone-2.40-x86_64-3.txz.asc --rw-r--r-- 1 root root 525 2009-06-13 04:43 ./slackware64/ap/xfsdump-3.0.1-x86_64-1.txt --rw-r--r-- 1 root root 301164 2009-06-13 04:43 ./slackware64/ap/xfsdump-3.0.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-13 04:43 ./slackware64/ap/xfsdump-3.0.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 525 2010-02-09 21:26 ./slackware64/ap/xfsdump-3.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 299376 2010-02-09 21:26 ./slackware64/ap/xfsdump-3.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-09 21:26 ./slackware64/ap/xfsdump-3.0.4-x86_64-1.txz.asc -rw-r--r-- 1 root root 508 2009-07-16 00:07 ./slackware64/ap/zsh-4.3.10-x86_64-1.txt -rw-r--r-- 1 root root 2252580 2009-07-16 00:07 ./slackware64/ap/zsh-4.3.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-07-16 00:07 ./slackware64/ap/zsh-4.3.10-x86_64-1.txz.asc -drwxr-xr-x 2 root root 12288 2009-08-19 00:23 ./slackware64/d --rw-r--r-- 1 root root 631 2008-10-07 17:08 ./slackware64/d/autoconf-2.63-noarch-1.txt --rw-r--r-- 1 root root 621992 2008-10-07 17:08 ./slackware64/d/autoconf-2.63-noarch-1.txz --rw-r--r-- 1 root root 197 2008-10-07 17:08 ./slackware64/d/autoconf-2.63-noarch-1.txz.asc --rw-r--r-- 1 root root 627 2008-10-07 17:09 ./slackware64/d/automake-1.10.1-noarch-1.txt --rw-r--r-- 1 root root 529340 2008-10-07 17:09 ./slackware64/d/automake-1.10.1-noarch-1.txz --rw-r--r-- 1 root root 197 2008-10-07 17:09 ./slackware64/d/automake-1.10.1-noarch-1.txz.asc --rw-r--r-- 1 root root 443 2009-05-24 18:33 ./slackware64/d/binutils-2.18.50.0.9-x86_64-2.txt --rw-r--r-- 1 root root 2402568 2009-05-24 18:33 ./slackware64/d/binutils-2.18.50.0.9-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-24 18:33 ./slackware64/d/binutils-2.18.50.0.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 471 2009-02-22 16:31 ./slackware64/d/bison-2.4.1-x86_64-1.txt --rw-r--r-- 1 root root 411800 2009-02-22 16:31 ./slackware64/d/bison-2.4.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-02-22 16:31 ./slackware64/d/bison-2.4.1-x86_64-1.txz.asc +drwxr-xr-x 2 root root 12288 2010-05-18 07:05 ./slackware64/d +-rw-r--r-- 1 root root 631 2010-01-12 20:10 ./slackware64/d/autoconf-2.65-noarch-1.txt +-rw-r--r-- 1 root root 685600 2010-01-12 20:10 ./slackware64/d/autoconf-2.65-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-01-12 20:10 ./slackware64/d/autoconf-2.65-noarch-1.txz.asc +-rw-r--r-- 1 root root 627 2010-01-12 20:12 ./slackware64/d/automake-1.11.1-noarch-1.txt +-rw-r--r-- 1 root root 571032 2010-01-12 20:12 ./slackware64/d/automake-1.11.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-01-12 20:12 ./slackware64/d/automake-1.11.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 443 2010-04-25 21:50 ./slackware64/d/binutils-2.20.51.0.8-x86_64-1.txt +-rw-r--r-- 1 root root 2661424 2010-04-25 21:50 ./slackware64/d/binutils-2.20.51.0.8-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-25 21:50 ./slackware64/d/binutils-2.20.51.0.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 471 2010-04-30 00:43 ./slackware64/d/bison-2.4.2-x86_64-1.txt +-rw-r--r-- 1 root root 419344 2010-04-30 00:43 ./slackware64/d/bison-2.4.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 00:43 ./slackware64/d/bison-2.4.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 314 2008-10-31 22:57 ./slackware64/d/ccache-2.4-x86_64-1.txt -rw-r--r-- 1 root root 24380 2008-10-31 22:57 ./slackware64/d/ccache-2.4-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-31 22:57 ./slackware64/d/ccache-2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 665 2009-05-23 04:27 ./slackware64/d/clisp-2.47-x86_64-2.txt --rw-r--r-- 1 root root 3894640 2009-05-23 04:27 ./slackware64/d/clisp-2.47-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:27 ./slackware64/d/clisp-2.47-x86_64-2.txz.asc --rw-r--r-- 1 root root 397 2009-05-23 04:28 ./slackware64/d/cmake-2.6.2-x86_64-2.txt --rw-r--r-- 1 root root 3584996 2009-05-23 04:28 ./slackware64/d/cmake-2.6.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:28 ./slackware64/d/cmake-2.6.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 350 2009-05-23 04:28 ./slackware64/d/cscope-15.6-x86_64-2.txt --rw-r--r-- 1 root root 90572 2009-05-23 04:28 ./slackware64/d/cscope-15.6-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:28 ./slackware64/d/cscope-15.6-x86_64-2.txz.asc +-rw-r--r-- 1 root root 665 2010-05-03 07:07 ./slackware64/d/clisp-2.48-x86_64-1.txt +-rw-r--r-- 1 root root 4164440 2010-05-03 07:07 ./slackware64/d/clisp-2.48-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 07:07 ./slackware64/d/clisp-2.48-x86_64-1.txz.asc +-rw-r--r-- 1 root root 397 2010-04-16 18:32 ./slackware64/d/cmake-2.8.1-x86_64-1.txt +-rw-r--r-- 1 root root 3915892 2010-04-16 18:32 ./slackware64/d/cmake-2.8.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-16 18:32 ./slackware64/d/cmake-2.8.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 350 2010-05-03 07:16 ./slackware64/d/cscope-15.7a-x86_64-1.txt +-rw-r--r-- 1 root root 98548 2010-05-03 07:16 ./slackware64/d/cscope-15.7a-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 07:16 ./slackware64/d/cscope-15.7a-x86_64-1.txz.asc -rw-r--r-- 1 root root 538 2008-10-15 23:21 ./slackware64/d/cvs-1.11.23-x86_64-1.txt -rw-r--r-- 1 root root 859048 2008-10-15 23:21 ./slackware64/d/cvs-1.11.23-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-15 23:21 ./slackware64/d/cvs-1.11.23-x86_64-1.txz.asc @@ -1190,543 +1200,567 @@ drwxr-xr-x 2 root root 12288 2009-08-19 00:23 ./slackware64/d -rw-r--r-- 1 root root 483 2008-11-04 11:53 ./slackware64/d/distcc-2.18.3-x86_64-2.txt -rw-r--r-- 1 root root 116144 2008-11-04 11:53 ./slackware64/d/distcc-2.18.3-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-11-04 11:53 ./slackware64/d/distcc-2.18.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 511 2009-03-09 19:35 ./slackware64/d/doxygen-1.5.8-x86_64-1.txt --rw-r--r-- 1 root root 2556604 2009-03-09 19:35 ./slackware64/d/doxygen-1.5.8-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-09 19:35 ./slackware64/d/doxygen-1.5.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 511 2010-02-23 21:40 ./slackware64/d/doxygen-1.6.3-x86_64-1.txt +-rw-r--r-- 1 root root 2632292 2010-02-23 21:40 ./slackware64/d/doxygen-1.6.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-23 21:40 ./slackware64/d/doxygen-1.6.3-x86_64-1.txz.asc -rw-r--r-- 1 root root 331 2008-10-22 21:35 ./slackware64/d/flex-2.5.35-x86_64-1.txt -rw-r--r-- 1 root root 270228 2008-10-22 21:35 ./slackware64/d/flex-2.5.35-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-22 21:35 ./slackware64/d/flex-2.5.35-x86_64-1.txz.asc --rw-r--r-- 1 root root 302 2009-05-24 20:28 ./slackware64/d/gcc-4.3.3-x86_64-4.txt --rw-r--r-- 1 root root 6870956 2009-05-24 20:28 ./slackware64/d/gcc-4.3.3-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-05-24 20:28 ./slackware64/d/gcc-4.3.3-x86_64-4.txz.asc --rw-r--r-- 1 root root 295 2009-05-24 20:29 ./slackware64/d/gcc-g++-4.3.3-x86_64-4.txt --rw-r--r-- 1 root root 4533548 2009-05-24 20:29 ./slackware64/d/gcc-g++-4.3.3-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-05-24 20:29 ./slackware64/d/gcc-g++-4.3.3-x86_64-4.txz.asc --rw-r--r-- 1 root root 768 2009-05-24 20:29 ./slackware64/d/gcc-gfortran-4.3.3-x86_64-4.txt --rw-r--r-- 1 root root 3203716 2009-05-24 20:29 ./slackware64/d/gcc-gfortran-4.3.3-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-05-24 20:29 ./slackware64/d/gcc-gfortran-4.3.3-x86_64-4.txz.asc --rw-r--r-- 1 root root 384 2009-05-24 20:30 ./slackware64/d/gcc-gnat-4.3.3-x86_64-4.txt --rw-r--r-- 1 root root 8963896 2009-05-24 20:30 ./slackware64/d/gcc-gnat-4.3.3-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-05-24 20:30 ./slackware64/d/gcc-gnat-4.3.3-x86_64-4.txz.asc --rw-r--r-- 1 root root 358 2009-05-24 20:33 ./slackware64/d/gcc-java-4.3.3-x86_64-4.txt --rw-r--r-- 1 root root 31737284 2009-05-24 20:33 ./slackware64/d/gcc-java-4.3.3-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-05-24 20:33 ./slackware64/d/gcc-java-4.3.3-x86_64-4.txz.asc --rw-r--r-- 1 root root 503 2009-05-24 20:33 ./slackware64/d/gcc-objc-4.3.3-x86_64-4.txt --rw-r--r-- 1 root root 2716672 2009-05-24 20:33 ./slackware64/d/gcc-objc-4.3.3-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-05-24 20:33 ./slackware64/d/gcc-objc-4.3.3-x86_64-4.txz.asc --rw-r--r-- 1 root root 757 2009-05-23 04:36 ./slackware64/d/gdb-6.8-x86_64-2.txt --rw-r--r-- 1 root root 1910156 2009-05-23 04:36 ./slackware64/d/gdb-6.8-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:36 ./slackware64/d/gdb-6.8-x86_64-2.txz.asc --rw-r--r-- 1 root root 629 2009-05-23 04:00 ./slackware64/d/gettext-tools-0.17-x86_64-3.txt --rw-r--r-- 1 root root 2286532 2009-05-23 04:00 ./slackware64/d/gettext-tools-0.17-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-05-23 04:00 ./slackware64/d/gettext-tools-0.17-x86_64-3.txz.asc --rw-r--r-- 1 root root 397 2009-08-02 03:08 ./slackware64/d/git-1.6.4-x86_64-1.txt --rw-r--r-- 1 root root 2473360 2009-08-02 03:08 ./slackware64/d/git-1.6.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-02 03:08 ./slackware64/d/git-1.6.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 302 2010-05-12 04:04 ./slackware64/d/gcc-4.4.4-x86_64-1.txt +-rw-r--r-- 1 root root 7178776 2010-05-12 04:04 ./slackware64/d/gcc-4.4.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-12 04:04 ./slackware64/d/gcc-4.4.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 295 2010-05-12 04:04 ./slackware64/d/gcc-g++-4.4.4-x86_64-1.txt +-rw-r--r-- 1 root root 4482756 2010-05-12 04:04 ./slackware64/d/gcc-g++-4.4.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-12 04:04 ./slackware64/d/gcc-g++-4.4.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 768 2010-05-12 04:04 ./slackware64/d/gcc-gfortran-4.4.4-x86_64-1.txt +-rw-r--r-- 1 root root 3642748 2010-05-12 04:04 ./slackware64/d/gcc-gfortran-4.4.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-12 04:04 ./slackware64/d/gcc-gfortran-4.4.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 384 2010-05-12 04:05 ./slackware64/d/gcc-gnat-4.4.4-x86_64-1.txt +-rw-r--r-- 1 root root 9158420 2010-05-12 04:05 ./slackware64/d/gcc-gnat-4.4.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-12 04:05 ./slackware64/d/gcc-gnat-4.4.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 358 2010-05-12 04:07 ./slackware64/d/gcc-java-4.4.4-x86_64-1.txt +-rw-r--r-- 1 root root 34172304 2010-05-12 04:07 ./slackware64/d/gcc-java-4.4.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-12 04:07 ./slackware64/d/gcc-java-4.4.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 503 2010-05-12 04:07 ./slackware64/d/gcc-objc-4.4.4-x86_64-1.txt +-rw-r--r-- 1 root root 3101468 2010-05-12 04:07 ./slackware64/d/gcc-objc-4.4.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-12 04:07 ./slackware64/d/gcc-objc-4.4.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 757 2010-04-29 04:05 ./slackware64/d/gdb-7.1-x86_64-1.txt +-rw-r--r-- 1 root root 2291124 2010-04-29 04:05 ./slackware64/d/gdb-7.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 04:05 ./slackware64/d/gdb-7.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 629 2010-01-13 00:55 ./slackware64/d/gettext-tools-0.17-x86_64-4.txt +-rw-r--r-- 1 root root 2285452 2010-01-13 00:55 ./slackware64/d/gettext-tools-0.17-x86_64-4.txz +-rw-r--r-- 1 root root 197 2010-01-13 00:55 ./slackware64/d/gettext-tools-0.17-x86_64-4.txz.asc +-rw-r--r-- 1 root root 397 2010-04-29 01:58 ./slackware64/d/git-1.7.1-x86_64-1.txt +-rw-r--r-- 1 root root 2563024 2010-04-29 01:58 ./slackware64/d/git-1.7.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 01:58 ./slackware64/d/git-1.7.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 562 2008-10-14 21:07 ./slackware64/d/gperf-3.0.3-x86_64-1.txt -rw-r--r-- 1 root root 85320 2008-10-14 21:07 ./slackware64/d/gperf-3.0.3-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-14 21:07 ./slackware64/d/gperf-3.0.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 438 2009-08-11 00:58 ./slackware64/d/guile-1.8.7-x86_64-1.txt --rw-r--r-- 1 root root 1526564 2009-08-11 00:58 ./slackware64/d/guile-1.8.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-11 00:58 ./slackware64/d/guile-1.8.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 438 2010-02-24 02:43 ./slackware64/d/guile-1.8.7-x86_64-3.txt +-rw-r--r-- 1 root root 1534976 2010-02-24 02:43 ./slackware64/d/guile-1.8.7-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-24 02:43 ./slackware64/d/guile-1.8.7-x86_64-3.txz.asc -rw-r--r-- 1 root root 432 2009-03-04 22:25 ./slackware64/d/indent-2.2.10-x86_64-1.txt -rw-r--r-- 1 root root 122708 2009-03-04 22:25 ./slackware64/d/indent-2.2.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-04 22:25 ./slackware64/d/indent-2.2.10-x86_64-1.txz.asc -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/d/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/d/install.end --rw-r--r-- 1 root root 233 2008-10-22 22:24 ./slackware64/d/intltool-0.40.5-x86_64-1.txt --rw-r--r-- 1 root root 53588 2008-10-22 22:24 ./slackware64/d/intltool-0.40.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-22 22:24 ./slackware64/d/intltool-0.40.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 332 2009-08-17 07:42 ./slackware64/d/kernel-headers-2.6.29.6-x86-2.txt --rw-r--r-- 1 root root 536468 2009-08-17 07:42 ./slackware64/d/kernel-headers-2.6.29.6-x86-2.txz --rw-r--r-- 1 root root 197 2009-08-17 07:42 ./slackware64/d/kernel-headers-2.6.29.6-x86-2.txz.asc --rw-r--r-- 1 root root 500 2008-10-07 17:07 ./slackware64/d/libtool-1.5.26-x86_64-1.txt --rw-r--r-- 1 root root 305596 2008-10-07 17:07 ./slackware64/d/libtool-1.5.26-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-07 17:07 ./slackware64/d/libtool-1.5.26-x86_64-1.txz.asc --rw-r--r-- 1 root root 475 2009-06-12 22:10 ./slackware64/d/m4-1.4.13-x86_64-1.txt --rw-r--r-- 1 root root 239340 2009-06-12 22:10 ./slackware64/d/m4-1.4.13-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-12 22:10 ./slackware64/d/m4-1.4.13-x86_64-1.txz.asc +-rw-r--r-- 1 root root 233 2010-04-30 03:00 ./slackware64/d/intltool-0.40.6-x86_64-1.txt +-rw-r--r-- 1 root root 61140 2010-04-30 03:00 ./slackware64/d/intltool-0.40.6-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 03:00 ./slackware64/d/intltool-0.40.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 332 2010-05-13 03:23 ./slackware64/d/kernel-headers-2.6.33.4-x86-1.txt +-rw-r--r-- 1 root root 535508 2010-05-13 03:23 ./slackware64/d/kernel-headers-2.6.33.4-x86-1.txz +-rw-r--r-- 1 root root 198 2010-05-13 03:23 ./slackware64/d/kernel-headers-2.6.33.4-x86-1.txz.asc +-rw-r--r-- 1 root root 500 2010-05-13 06:03 ./slackware64/d/libtool-2.2.6b-x86_64-2.txt +-rw-r--r-- 1 root root 371720 2010-05-13 06:03 ./slackware64/d/libtool-2.2.6b-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-13 06:03 ./slackware64/d/libtool-2.2.6b-x86_64-2.txz.asc +-rw-r--r-- 1 root root 475 2010-04-30 00:03 ./slackware64/d/m4-1.4.14-x86_64-1.txt +-rw-r--r-- 1 root root 239720 2010-04-30 00:03 ./slackware64/d/m4-1.4.14-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 00:03 ./slackware64/d/m4-1.4.14-x86_64-1.txz.asc -rw-r--r-- 1 root root 468 2008-09-21 20:43 ./slackware64/d/make-3.81-x86_64-1.txt -rw-r--r-- 1 root root 381000 2008-09-21 20:43 ./slackware64/d/make-3.81-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-21 20:43 ./slackware64/d/make-3.81-x86_64-1.txz.asc --rw-r--r-- 1 root root 3573 2009-07-15 23:35 ./slackware64/d/maketag --rw-r--r-- 1 root root 3573 2009-07-15 23:35 ./slackware64/d/maketag.ez --rw-r--r-- 1 root root 664 2009-04-30 20:29 ./slackware64/d/mercurial-1.2.1-x86_64-1.txt --rw-r--r-- 1 root root 878320 2009-04-30 20:29 ./slackware64/d/mercurial-1.2.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-30 20:29 ./slackware64/d/mercurial-1.2.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 310 2009-03-24 10:40 ./slackware64/d/nasm-2.05.01-x86_64-1.txt --rw-r--r-- 1 root root 360016 2009-03-24 10:40 ./slackware64/d/nasm-2.05.01-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-24 10:40 ./slackware64/d/nasm-2.05.01-x86_64-1.txz.asc --rw-r--r-- 1 root root 506 2009-06-09 18:33 ./slackware64/d/oprofile-0.9.4-x86_64-2.txt --rw-r--r-- 1 root root 624520 2009-06-09 18:33 ./slackware64/d/oprofile-0.9.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 18:33 ./slackware64/d/oprofile-0.9.4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 3573 2010-05-13 07:21 ./slackware64/d/maketag +-rw-r--r-- 1 root root 3573 2010-05-13 07:21 ./slackware64/d/maketag.ez +-rw-r--r-- 1 root root 664 2010-05-18 06:45 ./slackware64/d/mercurial-1.5.2-x86_64-1.txt +-rw-r--r-- 1 root root 1164736 2010-05-18 06:45 ./slackware64/d/mercurial-1.5.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-18 06:45 ./slackware64/d/mercurial-1.5.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 310 2010-01-19 19:56 ./slackware64/d/nasm-2.07-x86_64-1.txt +-rw-r--r-- 1 root root 368952 2010-01-19 19:56 ./slackware64/d/nasm-2.07-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-01-19 19:56 ./slackware64/d/nasm-2.07-x86_64-1.txz.asc +-rw-r--r-- 1 root root 506 2010-04-25 21:51 ./slackware64/d/oprofile-0.9.6-x86_64-2.txt +-rw-r--r-- 1 root root 729852 2010-04-25 21:51 ./slackware64/d/oprofile-0.9.6-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-04-25 21:51 ./slackware64/d/oprofile-0.9.6-x86_64-2.txz.asc -rw-r--r-- 1 root root 546 2008-11-04 12:43 ./slackware64/d/p2c-1.21alpha2-x86_64-3.txt -rw-r--r-- 1 root root 314736 2008-11-04 12:43 ./slackware64/d/p2c-1.21alpha2-x86_64-3.txz -rw-r--r-- 1 root root 197 2008-11-04 12:43 ./slackware64/d/p2c-1.21alpha2-x86_64-3.txz.asc --rw-r--r-- 1 root root 516 2009-05-23 06:17 ./slackware64/d/perl-5.10.0-x86_64-2.txt --rw-r--r-- 1 root root 13025648 2009-05-23 06:17 ./slackware64/d/perl-5.10.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 06:17 ./slackware64/d/perl-5.10.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 516 2009-10-02 19:55 ./slackware64/d/perl-5.10.1-x86_64-1.txt +-rw-r--r-- 1 root root 13618736 2009-10-02 19:55 ./slackware64/d/perl-5.10.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-10-02 19:55 ./slackware64/d/perl-5.10.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 446 2009-06-06 21:19 ./slackware64/d/pkg-config-0.23-x86_64-3.txt -rw-r--r-- 1 root root 60320 2009-06-06 21:19 ./slackware64/d/pkg-config-0.23-x86_64-3.txz -rw-r--r-- 1 root root 197 2009-06-06 21:19 ./slackware64/d/pkg-config-0.23-x86_64-3.txz.asc -rw-r--r-- 1 root root 339 2008-09-21 20:59 ./slackware64/d/pmake-1.111-x86_64-3.txt -rw-r--r-- 1 root root 82500 2008-09-21 20:59 ./slackware64/d/pmake-1.111-x86_64-3.txz -rw-r--r-- 1 root root 197 2008-09-21 20:59 ./slackware64/d/pmake-1.111-x86_64-3.txz.asc --rw-r--r-- 1 root root 438 2009-06-09 19:37 ./slackware64/d/python-2.6.2-x86_64-3.txt --rw-r--r-- 1 root root 11911080 2009-06-09 19:37 ./slackware64/d/python-2.6.2-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-09 19:37 ./slackware64/d/python-2.6.2-x86_64-3.txz.asc +-rw-r--r-- 1 root root 438 2009-12-06 02:01 ./slackware64/d/python-2.6.4-x86_64-1.txt +-rw-r--r-- 1 root root 12032764 2009-12-06 02:01 ./slackware64/d/python-2.6.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-06 02:01 ./slackware64/d/python-2.6.4-x86_64-1.txz.asc -rw-r--r-- 1 root root 322 2008-10-15 23:23 ./slackware64/d/rcs-5.7-x86_64-2.txt -rw-r--r-- 1 root root 151448 2008-10-15 23:23 ./slackware64/d/rcs-5.7-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-15 23:23 ./slackware64/d/rcs-5.7-x86_64-2.txz.asc --rw-r--r-- 1 root root 410 2009-06-19 20:29 ./slackware64/d/ruby-1.8.7_p174-x86_64-1.txt --rw-r--r-- 1 root root 2363856 2009-06-19 20:29 ./slackware64/d/ruby-1.8.7_p174-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-19 20:29 ./slackware64/d/ruby-1.8.7_p174-x86_64-1.txz.asc +-rw-r--r-- 1 root root 410 2010-04-25 23:05 ./slackware64/d/ruby-1.9.1_p378-x86_64-1.txt +-rw-r--r-- 1 root root 3221056 2010-04-25 23:05 ./slackware64/d/ruby-1.9.1_p378-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-25 23:05 ./slackware64/d/ruby-1.9.1_p378-x86_64-1.txz.asc -rw-r--r-- 1 root root 550 2008-11-04 13:20 ./slackware64/d/strace-4.5.18-x86_64-1.txt -rw-r--r-- 1 root root 96832 2008-11-04 13:20 ./slackware64/d/strace-4.5.18-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-11-04 13:20 ./slackware64/d/strace-4.5.18-x86_64-1.txz.asc --rw-r--r-- 1 root root 597 2009-08-07 02:14 ./slackware64/d/subversion-1.6.4-x86_64-1.txt --rw-r--r-- 1 root root 3319480 2009-08-07 02:14 ./slackware64/d/subversion-1.6.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-07 02:14 ./slackware64/d/subversion-1.6.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 597 2010-04-30 02:15 ./slackware64/d/subversion-1.6.11-x86_64-1.txt +-rw-r--r-- 1 root root 3335196 2010-04-30 02:15 ./slackware64/d/subversion-1.6.11-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 02:15 ./slackware64/d/subversion-1.6.11-x86_64-1.txz.asc -rw-r--r-- 1 root root 561 2009-03-09 08:59 ./slackware64/d/swig-1.3.38-x86_64-1.txt -rw-r--r-- 1 root root 1980624 2009-03-09 08:59 ./slackware64/d/swig-1.3.38-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-09 08:59 ./slackware64/d/swig-1.3.38-x86_64-1.txz.asc --rw-r--r-- 1 root root 483 2009-07-15 23:35 ./slackware64/d/tagfile -drwxr-xr-x 2 root root 4096 2009-05-23 08:11 ./slackware64/e --rw-r--r-- 1 root root 471 2009-05-23 04:32 ./slackware64/e/emacs-22.3-x86_64-3.txt --rw-r--r-- 1 root root 29344592 2009-05-23 04:32 ./slackware64/e/emacs-22.3-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-05-23 04:32 ./slackware64/e/emacs-22.3-x86_64-3.txz.asc +-rw-r--r-- 1 root root 483 2010-05-13 07:21 ./slackware64/d/tagfile +drwxr-xr-x 2 root root 4096 2010-05-09 03:47 ./slackware64/e +-rw-r--r-- 1 root root 471 2010-05-08 21:26 ./slackware64/e/emacs-23.2-x86_64-1.txt +-rw-r--r-- 1 root root 34941936 2010-05-08 21:26 ./slackware64/e/emacs-23.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-08 21:26 ./slackware64/e/emacs-23.2-x86_64-1.txz.asc -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/e/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/e/install.end --rw-r--r-- 1 root root 953 2009-04-30 20:00 ./slackware64/e/maketag --rw-r--r-- 1 root root 953 2009-04-30 20:00 ./slackware64/e/maketag.ez --rw-r--r-- 1 root root 10 2009-04-30 20:00 ./slackware64/e/tagfile -drwxr-xr-x 2 root root 4096 2009-08-25 10:42 ./slackware64/f +-rw-r--r-- 1 root root 953 2010-05-08 22:51 ./slackware64/e/maketag +-rw-r--r-- 1 root root 953 2010-05-08 22:51 ./slackware64/e/maketag.ez +-rw-r--r-- 1 root root 10 2010-05-08 22:51 ./slackware64/e/tagfile +drwxr-xr-x 2 root root 4096 2010-05-02 00:13 ./slackware64/f -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/f/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/f/install.end -rw-r--r-- 1 root root 502 2006-03-01 02:48 ./slackware64/f/linux-faqs-20060228-noarch-1.txt -rw-r--r-- 1 root root 287176 2006-03-01 02:48 ./slackware64/f/linux-faqs-20060228-noarch-1.txz -rw-r--r-- 1 root root 197 2006-03-01 02:48 ./slackware64/f/linux-faqs-20060228-noarch-1.txz.asc --rw-r--r-- 1 root root 341 2009-08-25 06:54 ./slackware64/f/linux-howtos-20090805-noarch-1.txt --rw-r--r-- 1 root root 6592280 2009-08-25 06:54 ./slackware64/f/linux-howtos-20090805-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-25 06:54 ./slackware64/f/linux-howtos-20090805-noarch-1.txz.asc --rw-r--r-- 1 root root 1064 2009-04-30 20:00 ./slackware64/f/maketag --rw-r--r-- 1 root root 1064 2009-04-30 20:00 ./slackware64/f/maketag.ez --rw-r--r-- 1 root root 32 2009-04-30 20:00 ./slackware64/f/tagfile -drwxr-xr-x 2 root root 4096 2009-08-19 00:23 ./slackware64/k +-rw-r--r-- 1 root root 341 2010-05-01 23:55 ./slackware64/f/linux-howtos-20100501-noarch-1.txt +-rw-r--r-- 1 root root 6560784 2010-05-01 23:55 ./slackware64/f/linux-howtos-20100501-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-01 23:55 ./slackware64/f/linux-howtos-20100501-noarch-1.txz.asc +-rw-r--r-- 1 root root 1064 2010-03-01 01:46 ./slackware64/f/maketag +-rw-r--r-- 1 root root 1064 2010-03-01 01:46 ./slackware64/f/maketag.ez +-rw-r--r-- 1 root root 32 2010-03-01 01:46 ./slackware64/f/tagfile +drwxr-xr-x 2 root root 4096 2010-05-14 19:52 ./slackware64/k -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/k/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/k/install.end --rw-r--r-- 1 root root 394 2009-08-18 22:13 ./slackware64/k/kernel-source-2.6.29.6-noarch-2.txt --rw-r--r-- 1 root root 49136492 2009-08-18 22:13 ./slackware64/k/kernel-source-2.6.29.6-noarch-2.txz --rw-r--r-- 1 root root 197 2009-08-18 22:13 ./slackware64/k/kernel-source-2.6.29.6-noarch-2.txz.asc --rw-r--r-- 1 root root 1161 2009-07-15 23:35 ./slackware64/k/maketag --rw-r--r-- 1 root root 1161 2009-07-15 23:35 ./slackware64/k/maketag.ez --rw-r--r-- 1 root root 18 2009-07-15 23:35 ./slackware64/k/tagfile -drwxr-xr-x 2 root root 4096 2009-08-14 20:41 ./slackware64/kde --rw-r--r-- 1 root root 322 2009-06-29 00:39 ./slackware64/kde/amarok-2.1.1-x86_64-1.txt --rw-r--r-- 1 root root 4974340 2009-06-29 00:39 ./slackware64/kde/amarok-2.1.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-29 00:39 ./slackware64/kde/amarok-2.1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 474 2009-06-03 17:43 ./slackware64/kde/guidance-power-manager-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 54664 2009-06-03 17:43 ./slackware64/kde/guidance-power-manager-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 17:43 ./slackware64/kde/guidance-power-manager-4.2.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 317 2010-05-13 03:22 ./slackware64/k/kernel-source-2.6.33.4-noarch-1.txt +-rw-r--r-- 1 root root 57174016 2010-05-13 03:22 ./slackware64/k/kernel-source-2.6.33.4-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-13 03:22 ./slackware64/k/kernel-source-2.6.33.4-noarch-1.txz.asc +-rw-r--r-- 1 root root 1161 2010-05-13 07:21 ./slackware64/k/maketag +-rw-r--r-- 1 root root 1161 2010-05-13 07:21 ./slackware64/k/maketag.ez +-rw-r--r-- 1 root root 18 2010-05-13 07:21 ./slackware64/k/tagfile +drwxr-xr-x 2 root root 12288 2010-05-18 02:53 ./slackware64/kde +-rw-r--r-- 1 root root 322 2010-04-10 21:44 ./slackware64/kde/amarok-2.3.0-x86_64-1.txt +-rw-r--r-- 1 root root 7428688 2010-04-10 21:44 ./slackware64/kde/amarok-2.3.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 21:44 ./slackware64/kde/amarok-2.3.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 472 2010-05-04 06:18 ./slackware64/kde/guidance-power-manager-4.4.0-x86_64-1.txt +-rw-r--r-- 1 root root 57684 2010-05-04 06:18 ./slackware64/kde/guidance-power-manager-4.4.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 06:18 ./slackware64/kde/guidance-power-manager-4.4.0-x86_64-1.txz.asc -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/kde/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/kde/install.end --rw-r--r-- 1 root root 382 2009-04-08 21:55 ./slackware64/kde/k3b-r948463-x86_64-1.txt --rw-r--r-- 1 root root 3803460 2009-04-08 21:55 ./slackware64/kde/k3b-r948463-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-08 21:55 ./slackware64/kde/k3b-r948463-x86_64-1.txz.asc --rw-r--r-- 1 root root 295 2009-08-07 23:21 ./slackware64/kde/kaudiocreator-r1008583-x86_64-1.txt --rw-r--r-- 1 root root 115600 2009-08-07 23:21 ./slackware64/kde/kaudiocreator-r1008583-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-07 23:21 ./slackware64/kde/kaudiocreator-r1008583-x86_64-1.txz.asc --rw-r--r-- 1 root root 381 2009-06-03 12:30 ./slackware64/kde/kdeaccessibility-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 5170012 2009-06-03 12:30 ./slackware64/kde/kdeaccessibility-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 12:30 ./slackware64/kde/kdeaccessibility-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 152 2009-06-03 13:18 ./slackware64/kde/kdeadmin-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 1723992 2009-06-03 13:18 ./slackware64/kde/kdeadmin-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 13:18 ./slackware64/kde/kdeadmin-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 215 2009-06-03 13:20 ./slackware64/kde/kdeartwork-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 17040280 2009-06-03 13:20 ./slackware64/kde/kdeartwork-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 13:20 ./slackware64/kde/kdeartwork-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 290 2009-06-03 11:42 ./slackware64/kde/kdebase-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 4491108 2009-06-03 11:42 ./slackware64/kde/kdebase-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 11:42 ./slackware64/kde/kdebase-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 274 2009-08-05 19:09 ./slackware64/kde/kdebase-runtime-4.2.4-x86_64-2.txt --rw-r--r-- 1 root root 59300296 2009-08-05 19:09 ./slackware64/kde/kdebase-runtime-4.2.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-05 19:09 ./slackware64/kde/kdebase-runtime-4.2.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 366 2009-06-03 12:14 ./slackware64/kde/kdebase-workspace-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 51549124 2009-06-03 12:14 ./slackware64/kde/kdebase-workspace-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 12:14 ./slackware64/kde/kdebase-workspace-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 419 2009-06-03 16:30 ./slackware64/kde/kdebindings-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 6011244 2009-06-03 16:30 ./slackware64/kde/kdebindings-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 16:30 ./slackware64/kde/kdebindings-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 129 2009-06-03 15:50 ./slackware64/kde/kdeedu-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 50847768 2009-06-03 15:50 ./slackware64/kde/kdeedu-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 15:50 ./slackware64/kde/kdeedu-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 172 2009-06-03 13:37 ./slackware64/kde/kdegames-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 31238492 2009-06-03 13:37 ./slackware64/kde/kdegames-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 13:37 ./slackware64/kde/kdegames-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 320 2009-06-03 13:51 ./slackware64/kde/kdegraphics-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 3669340 2009-06-03 13:51 ./slackware64/kde/kdegraphics-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 13:51 ./slackware64/kde/kdegraphics-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 177 2009-08-07 22:54 ./slackware64/kde/kdelibs-4.2.4-x86_64-3.txt --rw-r--r-- 1 root root 10474008 2009-08-07 22:54 ./slackware64/kde/kdelibs-4.2.4-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-08-07 22:54 ./slackware64/kde/kdelibs-4.2.4-x86_64-3.txz.asc --rw-r--r-- 1 root root 457 2009-06-03 12:44 ./slackware64/kde/kdemultimedia-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 1562720 2009-06-03 12:44 ./slackware64/kde/kdemultimedia-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 12:44 ./slackware64/kde/kdemultimedia-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 228 2009-06-29 19:41 ./slackware64/kde/kdenetwork-4.2.4-x86_64-2.txt --rw-r--r-- 1 root root 7485748 2009-06-29 19:41 ./slackware64/kde/kdenetwork-4.2.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-29 19:41 ./slackware64/kde/kdenetwork-4.2.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 366 2009-06-03 15:20 ./slackware64/kde/kdepim-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 13861308 2009-06-03 15:20 ./slackware64/kde/kdepim-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 15:20 ./slackware64/kde/kdepim-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 250 2009-06-03 10:55 ./slackware64/kde/kdepimlibs-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 1778440 2009-06-03 10:55 ./slackware64/kde/kdepimlibs-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 10:55 ./slackware64/kde/kdepimlibs-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 298 2009-06-03 15:56 ./slackware64/kde/kdeplasma-addons-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 4525256 2009-06-03 15:56 ./slackware64/kde/kdeplasma-addons-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 15:56 ./slackware64/kde/kdeplasma-addons-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 295 2009-06-03 14:16 ./slackware64/kde/kdesdk-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 6296572 2009-06-03 14:16 ./slackware64/kde/kdesdk-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 14:16 ./slackware64/kde/kdesdk-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 216 2009-06-03 13:38 ./slackware64/kde/kdetoys-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 1205168 2009-06-03 13:38 ./slackware64/kde/kdetoys-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 13:38 ./slackware64/kde/kdetoys-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 297 2009-06-03 12:39 ./slackware64/kde/kdeutils-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 2422476 2009-06-03 12:39 ./slackware64/kde/kdeutils-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 12:39 ./slackware64/kde/kdeutils-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 216 2009-02-07 14:13 ./slackware64/kde/kdevelop-3.9.91-x86_64-1.txt --rw-r--r-- 1 root root 1320996 2009-02-07 14:13 ./slackware64/kde/kdevelop-3.9.91-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-02-07 14:13 ./slackware64/kde/kdevelop-3.9.91-x86_64-1.txz.asc --rw-r--r-- 1 root root 247 2009-02-07 14:04 ./slackware64/kde/kdevplatform-0.9.91-x86_64-1.txt --rw-r--r-- 1 root root 1561424 2009-02-07 14:04 ./slackware64/kde/kdevplatform-0.9.91-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-02-07 14:04 ./slackware64/kde/kdevplatform-0.9.91-x86_64-1.txz.asc --rw-r--r-- 1 root root 291 2009-06-06 02:15 ./slackware64/kde/kdewebdev-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 1793132 2009-06-06 02:15 ./slackware64/kde/kdewebdev-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-06 02:15 ./slackware64/kde/kdewebdev-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 493 2009-08-12 22:18 ./slackware64/kde/koffice-2.0.2-x86_64-1.txt --rw-r--r-- 1 root root 38711064 2009-08-12 22:18 ./slackware64/kde/koffice-2.0.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:18 ./slackware64/kde/koffice-2.0.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 519 2009-06-03 16:42 ./slackware64/kde/konq-plugins-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 1159904 2009-06-03 16:42 ./slackware64/kde/konq-plugins-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 16:42 ./slackware64/kde/konq-plugins-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 594 2009-06-03 17:51 ./slackware64/kde/ktorrent-3.2.2-x86_64-1.txt --rw-r--r-- 1 root root 2525444 2009-06-03 17:51 ./slackware64/kde/ktorrent-3.2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 17:51 ./slackware64/kde/ktorrent-3.2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 3413 2009-06-06 01:36 ./slackware64/kde/maketag --rw-r--r-- 1 root root 3413 2009-06-06 01:36 ./slackware64/kde/maketag.ez --rw-r--r-- 1 root root 413 2009-05-23 04:44 ./slackware64/kde/mplayerthumbs-1.2-x86_64-2.txt --rw-r--r-- 1 root root 32300 2009-05-23 04:44 ./slackware64/kde/mplayerthumbs-1.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:44 ./slackware64/kde/mplayerthumbs-1.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 207 2009-06-03 17:51 ./slackware64/kde/skanlite-0.3_kde4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 1183844 2009-06-03 17:51 ./slackware64/kde/skanlite-0.3_kde4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 17:51 ./slackware64/kde/skanlite-0.3_kde4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 468 2009-06-06 01:36 ./slackware64/kde/tagfile -drwxr-xr-x 2 root root 24576 2009-08-14 20:42 ./slackware64/kdei +-rw-r--r-- 1 root root 382 2010-05-04 06:45 ./slackware64/kde/k3b-1.91.0-x86_64-3.txt +-rw-r--r-- 1 root root 9801948 2010-05-04 06:45 ./slackware64/kde/k3b-1.91.0-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-04 06:45 ./slackware64/kde/k3b-1.91.0-x86_64-3.txz.asc +-rw-r--r-- 1 root root 295 2010-05-04 06:36 ./slackware64/kde/kaudiocreator-r1118889-x86_64-1.txt +-rw-r--r-- 1 root root 130900 2010-05-04 06:36 ./slackware64/kde/kaudiocreator-r1118889-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 06:36 ./slackware64/kde/kaudiocreator-r1118889-x86_64-1.txz.asc +-rw-r--r-- 1 root root 414 2010-05-04 03:15 ./slackware64/kde/kdeaccessibility-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 3687560 2010-05-04 03:15 ./slackware64/kde/kdeaccessibility-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:15 ./slackware64/kde/kdeaccessibility-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 182 2010-05-04 03:31 ./slackware64/kde/kdeadmin-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 1369456 2010-05-04 03:31 ./slackware64/kde/kdeadmin-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:31 ./slackware64/kde/kdeadmin-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 233 2010-05-04 03:33 ./slackware64/kde/kdeartwork-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 63109624 2010-05-04 03:33 ./slackware64/kde/kdeartwork-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:33 ./slackware64/kde/kdeartwork-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 238 2010-05-04 02:15 ./slackware64/kde/kdebase-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 4466824 2010-05-04 02:15 ./slackware64/kde/kdebase-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 02:15 ./slackware64/kde/kdebase-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 292 2010-05-04 02:28 ./slackware64/kde/kdebase-runtime-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 7692132 2010-05-04 02:28 ./slackware64/kde/kdebase-runtime-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 02:28 ./slackware64/kde/kdebase-runtime-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 348 2010-05-04 04:26 ./slackware64/kde/kdebase-workspace-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 77989848 2010-05-04 04:26 ./slackware64/kde/kdebase-workspace-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 04:26 ./slackware64/kde/kdebase-workspace-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 513 2010-05-14 18:56 ./slackware64/kde/kdebindings-4.4.3-x86_64-2.txt +-rw-r--r-- 1 root root 8167900 2010-05-14 18:56 ./slackware64/kde/kdebindings-4.4.3-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-14 18:56 ./slackware64/kde/kdebindings-4.4.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 181 2010-05-06 05:37 ./slackware64/kde/kdeedu-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 47624488 2010-05-06 05:37 ./slackware64/kde/kdeedu-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-06 05:37 ./slackware64/kde/kdeedu-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 187 2010-05-04 03:38 ./slackware64/kde/kdegames-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 60830096 2010-05-04 03:38 ./slackware64/kde/kdegames-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:38 ./slackware64/kde/kdegames-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 345 2010-05-18 02:14 ./slackware64/kde/kdegraphics-4.4.3-x86_64-2.txt +-rw-r--r-- 1 root root 4045832 2010-05-18 02:14 ./slackware64/kde/kdegraphics-4.4.3-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-18 02:14 ./slackware64/kde/kdegraphics-4.4.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 18:25 ./slackware64/kde/kdelibs-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 13627284 2010-05-05 18:25 ./slackware64/kde/kdelibs-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 18:25 ./slackware64/kde/kdelibs-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 513 2010-05-04 03:22 ./slackware64/kde/kdemultimedia-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 1505340 2010-05-04 03:22 ./slackware64/kde/kdemultimedia-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:22 ./slackware64/kde/kdemultimedia-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 231 2010-05-14 03:03 ./slackware64/kde/kdenetwork-4.4.3-x86_64-2.txt +-rw-r--r-- 1 root root 9145692 2010-05-14 03:03 ./slackware64/kde/kdenetwork-4.4.3-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-14 03:03 ./slackware64/kde/kdenetwork-4.4.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 417 2010-05-04 21:39 ./slackware64/kde/kdepim-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 12578520 2010-05-04 21:39 ./slackware64/kde/kdepim-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 21:39 ./slackware64/kde/kdepim-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 508 2010-05-04 03:53 ./slackware64/kde/kdepim-runtime-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 1123480 2010-05-04 03:53 ./slackware64/kde/kdepim-runtime-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:53 ./slackware64/kde/kdepim-runtime-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 274 2010-05-04 02:12 ./slackware64/kde/kdepimlibs-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 2735660 2010-05-04 02:12 ./slackware64/kde/kdepimlibs-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 02:12 ./slackware64/kde/kdepimlibs-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-05-04 04:07 ./slackware64/kde/kdeplasma-addons-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 2237988 2010-05-04 04:07 ./slackware64/kde/kdeplasma-addons-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 04:07 ./slackware64/kde/kdeplasma-addons-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-05-04 02:34 ./slackware64/kde/kdesdk-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 6709696 2010-05-04 02:34 ./slackware64/kde/kdesdk-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 02:34 ./slackware64/kde/kdesdk-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2010-05-04 03:39 ./slackware64/kde/kdetoys-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 1242360 2010-05-04 03:39 ./slackware64/kde/kdetoys-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:39 ./slackware64/kde/kdetoys-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 330 2010-05-04 03:20 ./slackware64/kde/kdeutils-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 2903480 2010-05-04 03:20 ./slackware64/kde/kdeutils-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:20 ./slackware64/kde/kdeutils-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 220 2010-05-04 06:16 ./slackware64/kde/kdevelop-4.0.0-x86_64-1.txt +-rw-r--r-- 1 root root 1922064 2010-05-04 06:16 ./slackware64/kde/kdevelop-4.0.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 06:16 ./slackware64/kde/kdevelop-4.0.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 247 2010-05-04 06:13 ./slackware64/kde/kdevplatform-1.0.0-x86_64-1.txt +-rw-r--r-- 1 root root 2376416 2010-05-04 06:13 ./slackware64/kde/kdevplatform-1.0.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 06:13 ./slackware64/kde/kdevplatform-1.0.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 260 2010-05-04 04:10 ./slackware64/kde/kdewebdev-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 1397500 2010-05-04 04:10 ./slackware64/kde/kdewebdev-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 04:10 ./slackware64/kde/kdewebdev-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 493 2010-05-08 21:27 ./slackware64/kde/koffice-2.1.2-x86_64-2.txt +-rw-r--r-- 1 root root 13855168 2010-05-08 21:27 ./slackware64/kde/koffice-2.1.2-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-08 21:27 ./slackware64/kde/koffice-2.1.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 519 2010-05-04 06:18 ./slackware64/kde/konq-plugins-4.4.0-x86_64-1.txt +-rw-r--r-- 1 root root 1380872 2010-05-04 06:18 ./slackware64/kde/konq-plugins-4.4.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 06:18 ./slackware64/kde/konq-plugins-4.4.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 340 2010-05-04 21:57 ./slackware64/kde/kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txt +-rw-r--r-- 1 root root 113788 2010-05-04 21:57 ./slackware64/kde/kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 21:57 ./slackware64/kde/kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 582 2010-02-24 05:01 ./slackware64/kde/ktorrent-3.3.4-x86_64-1.txt +-rw-r--r-- 1 root root 2771600 2010-02-24 05:01 ./slackware64/kde/ktorrent-3.3.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-24 05:01 ./slackware64/kde/ktorrent-3.3.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 3731 2010-05-16 18:19 ./slackware64/kde/maketag +-rw-r--r-- 1 root root 3731 2010-05-16 18:19 ./slackware64/kde/maketag.ez +-rw-r--r-- 1 root root 329 2010-05-04 03:30 ./slackware64/kde/oxygen-icons-4.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 21122280 2010-05-04 03:30 ./slackware64/kde/oxygen-icons-4.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 03:30 ./slackware64/kde/oxygen-icons-4.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 225 2010-05-05 23:45 ./slackware64/kde/polkit-kde-1-r1120537-x86_64-1.txt +-rw-r--r-- 1 root root 94300 2010-05-05 23:45 ./slackware64/kde/polkit-kde-1-r1120537-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 23:45 ./slackware64/kde/polkit-kde-1-r1120537-x86_64-1.txz.asc +-rw-r--r-- 1 root root 442 2010-05-05 23:46 ./slackware64/kde/polkit-qt-1-r1118744-x86_64-1.txt +-rw-r--r-- 1 root root 67692 2010-05-05 23:46 ./slackware64/kde/polkit-qt-1-r1118744-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 23:46 ./slackware64/kde/polkit-qt-1-r1118744-x86_64-1.txz.asc +-rw-r--r-- 1 root root 207 2010-05-04 06:20 ./slackware64/kde/skanlite-0.4_kde4.4.0-x86_64-1.txt +-rw-r--r-- 1 root root 1219164 2010-05-04 06:20 ./slackware64/kde/skanlite-0.4_kde4.4.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 06:20 ./slackware64/kde/skanlite-0.4_kde4.4.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 543 2010-05-16 18:19 ./slackware64/kde/tagfile +drwxr-xr-x 2 root root 20480 2010-05-06 21:24 ./slackware64/kdei -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/kdei/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/kdei/install.end --rw-r--r-- 1 root root 188 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-ar-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1963216 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-ar-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-ar-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 191 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-bg-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 958368 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-bg-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-bg-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 225 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-bn_IN-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 229920 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-bn_IN-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 18:58 ./slackware64/kdei/kde-l10n-bn_IN-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 19:03 ./slackware64/kdei/kde-l10n-ca-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 3428040 2009-06-03 19:03 ./slackware64/kdei/kde-l10n-ca-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:03 ./slackware64/kdei/kde-l10n-ca-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 187 2009-06-03 19:04 ./slackware64/kdei/kde-l10n-cs-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 2347852 2009-06-03 19:04 ./slackware64/kdei/kde-l10n-cs-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:04 ./slackware64/kdei/kde-l10n-cs-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 203 2009-06-03 19:04 ./slackware64/kdei/kde-l10n-csb-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 315064 2009-06-03 19:04 ./slackware64/kdei/kde-l10n-csb-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:04 ./slackware64/kdei/kde-l10n-csb-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 19:10 ./slackware64/kdei/kde-l10n-da-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 16860936 2009-06-03 19:10 ./slackware64/kdei/kde-l10n-da-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:10 ./slackware64/kdei/kde-l10n-da-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 19:18 ./slackware64/kdei/kde-l10n-de-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 17287888 2009-06-03 19:18 ./slackware64/kdei/kde-l10n-de-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:18 ./slackware64/kdei/kde-l10n-de-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 187 2009-06-03 19:18 ./slackware64/kdei/kde-l10n-el-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1847204 2009-06-03 19:18 ./slackware64/kdei/kde-l10n-el-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:18 ./slackware64/kdei/kde-l10n-el-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 230 2009-06-03 19:21 ./slackware64/kdei/kde-l10n-en_GB-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 2968980 2009-06-03 19:21 ./slackware64/kdei/kde-l10n-en_GB-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:21 ./slackware64/kdei/kde-l10n-en_GB-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 19:28 ./slackware64/kdei/kde-l10n-es-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 15724708 2009-06-03 19:28 ./slackware64/kdei/kde-l10n-es-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:28 ./slackware64/kdei/kde-l10n-es-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 190 2009-06-03 19:35 ./slackware64/kdei/kde-l10n-et-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 7758616 2009-06-03 19:35 ./slackware64/kdei/kde-l10n-et-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:35 ./slackware64/kdei/kde-l10n-et-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 19:35 ./slackware64/kdei/kde-l10n-eu-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1104620 2009-06-03 19:35 ./slackware64/kdei/kde-l10n-eu-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:35 ./slackware64/kdei/kde-l10n-eu-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 19:36 ./slackware64/kdei/kde-l10n-fi-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1289824 2009-06-03 19:36 ./slackware64/kdei/kde-l10n-fi-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:36 ./slackware64/kdei/kde-l10n-fi-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 19:44 ./slackware64/kdei/kde-l10n-fr-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 18832360 2009-06-03 19:44 ./slackware64/kdei/kde-l10n-fr-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:44 ./slackware64/kdei/kde-l10n-fr-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 187 2009-06-03 19:44 ./slackware64/kdei/kde-l10n-ga-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1096476 2009-06-03 19:44 ./slackware64/kdei/kde-l10n-ga-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:44 ./slackware64/kdei/kde-l10n-ga-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 190 2009-06-03 19:46 ./slackware64/kdei/kde-l10n-gl-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 3089772 2009-06-03 19:46 ./slackware64/kdei/kde-l10n-gl-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:46 ./slackware64/kdei/kde-l10n-gl-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 190 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-gu-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 411380 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-gu-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-gu-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-he-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1212988 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-he-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-he-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 187 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-hi-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 991136 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-hi-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:47 ./slackware64/kdei/kde-l10n-hi-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 191 2009-06-03 19:49 ./slackware64/kdei/kde-l10n-hu-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 3660752 2009-06-03 19:49 ./slackware64/kdei/kde-l10n-hu-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:49 ./slackware64/kdei/kde-l10n-hu-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 191 2009-06-03 19:50 ./slackware64/kdei/kde-l10n-is-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 889140 2009-06-03 19:50 ./slackware64/kdei/kde-l10n-is-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 19:50 ./slackware64/kdei/kde-l10n-is-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:01 ./slackware64/kdei/kde-l10n-it-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 9874236 2009-06-03 20:01 ./slackware64/kdei/kde-l10n-it-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:01 ./slackware64/kdei/kde-l10n-it-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 190 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-ja-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 2165364 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-ja-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-ja-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-kk-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 772824 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-kk-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-kk-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 187 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-km-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1339200 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-km-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:02 ./slackware64/kdei/kde-l10n-km-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-kn-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 255064 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-kn-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-kn-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-ko-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 864844 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-ko-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-ko-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-ku-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 278408 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-ku-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:03 ./slackware64/kdei/kde-l10n-ku-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 192 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-lt-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1076124 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-lt-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-lt-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-lv-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1083572 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-lv-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-lv-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 202 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-mai-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 449408 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-mai-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:04 ./slackware64/kdei/kde-l10n-mai-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 192 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-mk-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 841812 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-mk-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-mk-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 191 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-ml-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 19126956 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-ml-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-ml-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-mr-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 200592 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-mr-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:05 ./slackware64/kdei/kde-l10n-mr-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 201 2009-06-03 20:06 ./slackware64/kdei/kde-l10n-nb-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1872308 2009-06-03 20:06 ./slackware64/kdei/kde-l10n-nb-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:06 ./slackware64/kdei/kde-l10n-nb-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 203 2009-06-03 20:07 ./slackware64/kdei/kde-l10n-nds-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 2915236 2009-06-03 20:07 ./slackware64/kdei/kde-l10n-nds-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:07 ./slackware64/kdei/kde-l10n-nds-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 187 2009-06-03 20:12 ./slackware64/kdei/kde-l10n-nl-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 11785764 2009-06-03 20:12 ./slackware64/kdei/kde-l10n-nl-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:12 ./slackware64/kdei/kde-l10n-nl-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 201 2009-06-03 20:13 ./slackware64/kdei/kde-l10n-nn-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1357592 2009-06-03 20:13 ./slackware64/kdei/kde-l10n-nn-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:13 ./slackware64/kdei/kde-l10n-nn-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:13 ./slackware64/kdei/kde-l10n-pa-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 767928 2009-06-03 20:13 ./slackware64/kdei/kde-l10n-pa-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:13 ./slackware64/kdei/kde-l10n-pa-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 20:14 ./slackware64/kdei/kde-l10n-pl-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 2883392 2009-06-03 20:14 ./slackware64/kdei/kde-l10n-pl-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:14 ./slackware64/kdei/kde-l10n-pl-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 192 2009-06-03 20:23 ./slackware64/kdei/kde-l10n-pt-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 5640556 2009-06-03 20:23 ./slackware64/kdei/kde-l10n-pt-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:23 ./slackware64/kdei/kde-l10n-pt-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 238 2009-06-03 20:30 ./slackware64/kdei/kde-l10n-pt_BR-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 10807452 2009-06-03 20:30 ./slackware64/kdei/kde-l10n-pt_BR-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:30 ./slackware64/kdei/kde-l10n-pt_BR-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 190 2009-06-03 20:31 ./slackware64/kdei/kde-l10n-ro-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 2390076 2009-06-03 20:31 ./slackware64/kdei/kde-l10n-ro-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:31 ./slackware64/kdei/kde-l10n-ro-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:38 ./slackware64/kdei/kde-l10n-ru-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 4486976 2009-06-03 20:38 ./slackware64/kdei/kde-l10n-ru-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:38 ./slackware64/kdei/kde-l10n-ru-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 188 2009-06-03 20:38 ./slackware64/kdei/kde-l10n-sk-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1137504 2009-06-03 20:38 ./slackware64/kdei/kde-l10n-sk-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:38 ./slackware64/kdei/kde-l10n-sk-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 191 2009-06-03 20:39 ./slackware64/kdei/kde-l10n-sl-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 2762260 2009-06-03 20:39 ./slackware64/kdei/kde-l10n-sl-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:39 ./slackware64/kdei/kde-l10n-sl-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:45 ./slackware64/kdei/kde-l10n-sr-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 3408380 2009-06-03 20:45 ./slackware64/kdei/kde-l10n-sr-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:45 ./slackware64/kdei/kde-l10n-sr-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:54 ./slackware64/kdei/kde-l10n-sv-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 19270940 2009-06-03 20:54 ./slackware64/kdei/kde-l10n-sv-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:54 ./slackware64/kdei/kde-l10n-sv-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 187 2009-06-03 20:54 ./slackware64/kdei/kde-l10n-tg-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 871372 2009-06-03 20:54 ./slackware64/kdei/kde-l10n-tg-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:54 ./slackware64/kdei/kde-l10n-tg-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 186 2009-06-03 20:55 ./slackware64/kdei/kde-l10n-th-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 831272 2009-06-03 20:55 ./slackware64/kdei/kde-l10n-th-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:55 ./slackware64/kdei/kde-l10n-th-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 20:55 ./slackware64/kdei/kde-l10n-tr-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1444844 2009-06-03 20:55 ./slackware64/kdei/kde-l10n-tr-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 20:55 ./slackware64/kdei/kde-l10n-tr-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 191 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-uk-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 7475956 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-uk-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-uk-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 189 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-wa-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 452408 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-wa-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-wa-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 236 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-zh_CN-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 2788680 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-zh_CN-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 21:05 ./slackware64/kdei/kde-l10n-zh_CN-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 225 2009-06-03 21:06 ./slackware64/kdei/kde-l10n-zh_TW-4.2.4-noarch-1.txt --rw-r--r-- 1 root root 1780256 2009-06-03 21:06 ./slackware64/kdei/kde-l10n-zh_TW-4.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 21:06 ./slackware64/kdei/kde-l10n-zh_TW-4.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 241 2009-08-12 22:29 ./slackware64/kdei/koffice-l10n-ca-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 777000 2009-08-12 22:29 ./slackware64/kdei/koffice-l10n-ca-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:29 ./slackware64/kdei/koffice-l10n-ca-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 239 2009-08-12 22:29 ./slackware64/kdei/koffice-l10n-cs-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 131880 2009-08-12 22:29 ./slackware64/kdei/koffice-l10n-cs-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:29 ./slackware64/kdei/koffice-l10n-cs-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 240 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-da-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 768308 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-da-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-da-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 240 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-de-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 4885012 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-de-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-de-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 239 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-el-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 222360 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-el-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:30 ./slackware64/kdei/koffice-l10n-el-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 282 2009-08-12 22:31 ./slackware64/kdei/koffice-l10n-en_GB-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 139784 2009-08-12 22:31 ./slackware64/kdei/koffice-l10n-en_GB-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:31 ./slackware64/kdei/koffice-l10n-en_GB-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 241 2009-08-12 22:31 ./slackware64/kdei/koffice-l10n-es-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 5225336 2009-08-12 22:31 ./slackware64/kdei/koffice-l10n-es-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:31 ./slackware64/kdei/koffice-l10n-es-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 242 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-et-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 851784 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-et-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-et-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 240 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-fr-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 4247592 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-fr-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-fr-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 243 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-fy-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 175772 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-fy-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:32 ./slackware64/kdei/koffice-l10n-fy-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 242 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-gl-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 240936 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-gl-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-gl-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 239 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-hi-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 143628 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-hi-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-hi-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 241 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-it-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 748480 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-it-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-it-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 242 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-ja-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 175780 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-ja-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-ja-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 240 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-kk-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 213432 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-kk-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-kk-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 253 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-nb-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 203240 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-nb-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:33 ./slackware64/kdei/koffice-l10n-nb-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 255 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-nds-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 206288 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-nds-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-nds-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 239 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-nl-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 2565304 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-nl-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-nl-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 240 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-pl-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 174328 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-pl-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:34 ./slackware64/kdei/koffice-l10n-pl-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 244 2009-08-12 22:35 ./slackware64/kdei/koffice-l10n-pt-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 803840 2009-08-12 22:35 ./slackware64/kdei/koffice-l10n-pt-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:35 ./slackware64/kdei/koffice-l10n-pt-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 287 2009-08-12 22:36 ./slackware64/kdei/koffice-l10n-pt_BR-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 1865328 2009-08-12 22:36 ./slackware64/kdei/koffice-l10n-pt_BR-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:36 ./slackware64/kdei/koffice-l10n-pt_BR-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 241 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-sv-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 5179632 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-sv-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-sv-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 241 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-tr-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 145868 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-tr-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-tr-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 243 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-uk-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 591408 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-uk-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-uk-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 241 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-wa-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 144512 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-wa-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-wa-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 288 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-zh_CN-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 145104 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-zh_CN-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-zh_CN-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 277 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-zh_TW-2.0.2-noarch-1.txt --rw-r--r-- 1 root root 200292 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-zh_TW-2.0.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-12 22:37 ./slackware64/kdei/koffice-l10n-zh_TW-2.0.2-noarch-1.txz.asc --rw-r--r-- 1 root root 7414 2009-06-29 02:02 ./slackware64/kdei/maketag --rw-r--r-- 1 root root 7414 2009-06-29 02:02 ./slackware64/kdei/maketag.ez --rw-r--r-- 1 root root 1467 2009-06-29 02:02 ./slackware64/kdei/tagfile -drwxr-xr-x 2 root root 40960 2009-08-25 04:55 ./slackware64/l +-rw-r--r-- 1 root root 188 2010-05-05 00:56 ./slackware64/kdei/kde-l10n-ar-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 2063644 2010-05-05 00:56 ./slackware64/kdei/kde-l10n-ar-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 00:56 ./slackware64/kdei/kde-l10n-ar-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 00:56 ./slackware64/kdei/kde-l10n-bg-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1025384 2010-05-05 00:56 ./slackware64/kdei/kde-l10n-bg-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 00:56 ./slackware64/kdei/kde-l10n-bg-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 01:00 ./slackware64/kdei/kde-l10n-ca-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 4430640 2010-05-05 01:00 ./slackware64/kdei/kde-l10n-ca-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:00 ./slackware64/kdei/kde-l10n-ca-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 266 2010-05-05 01:00 ./slackware64/kdei/kde-l10n-ca@valencia-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1997504 2010-05-05 01:00 ./slackware64/kdei/kde-l10n-ca@valencia-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:00 ./slackware64/kdei/kde-l10n-ca@valencia-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 187 2010-05-05 01:01 ./slackware64/kdei/kde-l10n-cs-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 2436612 2010-05-05 01:01 ./slackware64/kdei/kde-l10n-cs-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:01 ./slackware64/kdei/kde-l10n-cs-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 203 2010-05-05 01:01 ./slackware64/kdei/kde-l10n-csb-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 375948 2010-05-05 01:01 ./slackware64/kdei/kde-l10n-csb-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:01 ./slackware64/kdei/kde-l10n-csb-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 01:04 ./slackware64/kdei/kde-l10n-da-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 16660808 2010-05-05 01:04 ./slackware64/kdei/kde-l10n-da-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:04 ./slackware64/kdei/kde-l10n-da-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 01:10 ./slackware64/kdei/kde-l10n-de-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 17824548 2010-05-05 01:10 ./slackware64/kdei/kde-l10n-de-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:10 ./slackware64/kdei/kde-l10n-de-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 187 2010-05-05 01:10 ./slackware64/kdei/kde-l10n-el-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1809404 2010-05-05 01:10 ./slackware64/kdei/kde-l10n-el-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:10 ./slackware64/kdei/kde-l10n-el-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 230 2010-05-05 01:12 ./slackware64/kdei/kde-l10n-en_GB-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 3232252 2010-05-05 01:12 ./slackware64/kdei/kde-l10n-en_GB-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:12 ./slackware64/kdei/kde-l10n-en_GB-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 01:13 ./slackware64/kdei/kde-l10n-eo-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 825464 2010-05-05 01:13 ./slackware64/kdei/kde-l10n-eo-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:13 ./slackware64/kdei/kde-l10n-eo-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 01:18 ./slackware64/kdei/kde-l10n-es-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 26665308 2010-05-05 01:18 ./slackware64/kdei/kde-l10n-es-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:18 ./slackware64/kdei/kde-l10n-es-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 190 2010-05-05 01:24 ./slackware64/kdei/kde-l10n-et-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 8264620 2010-05-05 01:24 ./slackware64/kdei/kde-l10n-et-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:24 ./slackware64/kdei/kde-l10n-et-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 01:25 ./slackware64/kdei/kde-l10n-eu-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1359236 2010-05-05 01:25 ./slackware64/kdei/kde-l10n-eu-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:25 ./slackware64/kdei/kde-l10n-eu-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 01:25 ./slackware64/kdei/kde-l10n-fi-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1484884 2010-05-05 01:25 ./slackware64/kdei/kde-l10n-fi-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:25 ./slackware64/kdei/kde-l10n-fi-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 01:30 ./slackware64/kdei/kde-l10n-fr-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 19389372 2010-05-05 01:30 ./slackware64/kdei/kde-l10n-fr-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:30 ./slackware64/kdei/kde-l10n-fr-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 01:30 ./slackware64/kdei/kde-l10n-fy-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 539820 2010-05-05 01:30 ./slackware64/kdei/kde-l10n-fy-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:30 ./slackware64/kdei/kde-l10n-fy-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 187 2010-05-05 01:31 ./slackware64/kdei/kde-l10n-ga-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 2400540 2010-05-05 01:31 ./slackware64/kdei/kde-l10n-ga-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:31 ./slackware64/kdei/kde-l10n-ga-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 190 2010-05-05 01:32 ./slackware64/kdei/kde-l10n-gl-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 3316472 2010-05-05 01:32 ./slackware64/kdei/kde-l10n-gl-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:32 ./slackware64/kdei/kde-l10n-gl-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 190 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-gu-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 436672 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-gu-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-gu-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-he-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1209312 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-he-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-he-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 187 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-hi-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 898900 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-hi-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:33 ./slackware64/kdei/kde-l10n-hi-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 190 2010-05-05 01:34 ./slackware64/kdei/kde-l10n-hr-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 792424 2010-05-05 01:34 ./slackware64/kdei/kde-l10n-hr-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:34 ./slackware64/kdei/kde-l10n-hr-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-hu-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 3831752 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-hu-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-hu-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 192 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-id-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 315192 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-id-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-id-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-is-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 849688 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-is-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:35 ./slackware64/kdei/kde-l10n-is-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 01:41 ./slackware64/kdei/kde-l10n-it-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 10171600 2010-05-05 01:41 ./slackware64/kdei/kde-l10n-it-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:41 ./slackware64/kdei/kde-l10n-it-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 190 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-ja-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1882384 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-ja-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-ja-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-kk-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1024436 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-kk-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-kk-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 187 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-km-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1406516 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-km-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:42 ./slackware64/kdei/kde-l10n-km-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-kn-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 320252 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-kn-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-kn-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-ko-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1002264 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-ko-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-ko-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 192 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-lt-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1186260 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-lt-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:43 ./slackware64/kdei/kde-l10n-lt-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-lv-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1439268 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-lv-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-lv-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 202 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-mai-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 372136 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-mai-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-mai-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 192 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-mk-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 769352 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-mk-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:44 ./slackware64/kdei/kde-l10n-mk-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 01:45 ./slackware64/kdei/kde-l10n-ml-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 19133580 2010-05-05 01:45 ./slackware64/kdei/kde-l10n-ml-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:45 ./slackware64/kdei/kde-l10n-ml-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 201 2010-05-05 01:45 ./slackware64/kdei/kde-l10n-nb-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 2212892 2010-05-05 01:45 ./slackware64/kdei/kde-l10n-nb-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:45 ./slackware64/kdei/kde-l10n-nb-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 203 2010-05-05 01:46 ./slackware64/kdei/kde-l10n-nds-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 3158224 2010-05-05 01:46 ./slackware64/kdei/kde-l10n-nds-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:46 ./slackware64/kdei/kde-l10n-nds-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 187 2010-05-05 01:50 ./slackware64/kdei/kde-l10n-nl-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 13205332 2010-05-05 01:50 ./slackware64/kdei/kde-l10n-nl-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:50 ./slackware64/kdei/kde-l10n-nl-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 201 2010-05-05 01:50 ./slackware64/kdei/kde-l10n-nn-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1767716 2010-05-05 01:50 ./slackware64/kdei/kde-l10n-nn-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:50 ./slackware64/kdei/kde-l10n-nn-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 01:51 ./slackware64/kdei/kde-l10n-pa-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 853152 2010-05-05 01:51 ./slackware64/kdei/kde-l10n-pa-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:51 ./slackware64/kdei/kde-l10n-pa-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 01:54 ./slackware64/kdei/kde-l10n-pl-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 5217844 2010-05-05 01:54 ./slackware64/kdei/kde-l10n-pl-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 01:54 ./slackware64/kdei/kde-l10n-pl-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 192 2010-05-05 02:00 ./slackware64/kdei/kde-l10n-pt-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 5689424 2010-05-05 02:00 ./slackware64/kdei/kde-l10n-pt-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:00 ./slackware64/kdei/kde-l10n-pt-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 238 2010-05-05 02:06 ./slackware64/kdei/kde-l10n-pt_BR-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 16869156 2010-05-05 02:06 ./slackware64/kdei/kde-l10n-pt_BR-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:06 ./slackware64/kdei/kde-l10n-pt_BR-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 190 2010-05-05 02:07 ./slackware64/kdei/kde-l10n-ro-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 2471196 2010-05-05 02:07 ./slackware64/kdei/kde-l10n-ro-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:07 ./slackware64/kdei/kde-l10n-ro-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 02:10 ./slackware64/kdei/kde-l10n-ru-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 4728316 2010-05-05 02:10 ./slackware64/kdei/kde-l10n-ru-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:10 ./slackware64/kdei/kde-l10n-ru-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 02:10 ./slackware64/kdei/kde-l10n-si-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 322008 2010-05-05 02:10 ./slackware64/kdei/kde-l10n-si-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:10 ./slackware64/kdei/kde-l10n-si-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 188 2010-05-05 02:11 ./slackware64/kdei/kde-l10n-sk-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 3472092 2010-05-05 02:11 ./slackware64/kdei/kde-l10n-sk-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:11 ./slackware64/kdei/kde-l10n-sk-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 02:12 ./slackware64/kdei/kde-l10n-sl-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 2790880 2010-05-05 02:12 ./slackware64/kdei/kde-l10n-sl-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:12 ./slackware64/kdei/kde-l10n-sl-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 02:14 ./slackware64/kdei/kde-l10n-sr-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 2962476 2010-05-05 02:14 ./slackware64/kdei/kde-l10n-sr-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:14 ./slackware64/kdei/kde-l10n-sr-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 02:20 ./slackware64/kdei/kde-l10n-sv-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 17603088 2010-05-05 02:20 ./slackware64/kdei/kde-l10n-sv-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:20 ./slackware64/kdei/kde-l10n-sv-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 187 2010-05-05 02:20 ./slackware64/kdei/kde-l10n-tg-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 770408 2010-05-05 02:20 ./slackware64/kdei/kde-l10n-tg-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:20 ./slackware64/kdei/kde-l10n-tg-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 02:21 ./slackware64/kdei/kde-l10n-tr-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1794852 2010-05-05 02:21 ./slackware64/kdei/kde-l10n-tr-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:21 ./slackware64/kdei/kde-l10n-tr-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 191 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-uk-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 13292700 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-uk-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-uk-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 189 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-wa-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 1247352 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-wa-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-wa-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 236 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-zh_CN-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 3006908 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-zh_CN-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:27 ./slackware64/kdei/kde-l10n-zh_CN-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 225 2010-05-05 02:28 ./slackware64/kdei/kde-l10n-zh_TW-4.4.3-noarch-1.txt +-rw-r--r-- 1 root root 2036268 2010-05-05 02:28 ./slackware64/kdei/kde-l10n-zh_TW-4.4.3-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 02:28 ./slackware64/kdei/kde-l10n-zh_TW-4.4.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 241 2010-04-10 05:05 ./slackware64/kdei/koffice-l10n-ca-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 424724 2010-04-10 05:05 ./slackware64/kdei/koffice-l10n-ca-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:05 ./slackware64/kdei/koffice-l10n-ca-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 370 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-ca@valencia-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 213544 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-ca@valencia-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-ca@valencia-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 240 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-da-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 419592 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-da-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-da-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 240 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-de-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 1263624 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-de-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-de-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 239 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-el-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 206512 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-el-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-el-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 282 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-en_GB-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 144468 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-en_GB-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:06 ./slackware64/kdei/koffice-l10n-en_GB-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 241 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-es-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 2771316 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-es-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-es-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 242 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-et-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 534504 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-et-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-et-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 240 2010-04-10 18:27 ./slackware64/kdei/koffice-l10n-fr-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 1095256 2010-04-10 18:27 ./slackware64/kdei/koffice-l10n-fr-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 18:27 ./slackware64/kdei/koffice-l10n-fr-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 243 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-fy-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 165856 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-fy-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-fy-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 242 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-gl-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 235332 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-gl-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-gl-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 259 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-hne-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 143384 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-hne-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-hne-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 241 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-it-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 427280 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-it-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-it-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 242 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-ja-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 165316 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-ja-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-ja-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 240 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-kk-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 200552 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-kk-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:07 ./slackware64/kdei/koffice-l10n-kk-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 253 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nb-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 213444 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nb-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nb-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 255 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nds-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 212696 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nds-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nds-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 239 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nl-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 1564424 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nl-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-nl-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 240 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-pl-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 176872 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-pl-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:08 ./slackware64/kdei/koffice-l10n-pl-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 244 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-pt-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 847732 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-pt-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-pt-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 287 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-pt_BR-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 659048 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-pt_BR-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-pt_BR-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 241 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-sv-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 3992956 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-sv-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-sv-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 241 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-tr-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 151140 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-tr-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:09 ./slackware64/kdei/koffice-l10n-tr-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 243 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-uk-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 463848 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-uk-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-uk-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 241 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-wa-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 143604 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-wa-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-wa-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 288 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-zh_CN-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 143680 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-zh_CN-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-zh_CN-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 277 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-zh_TW-2.1.2-noarch-1.txt +-rw-r--r-- 1 root root 207144 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-zh_TW-2.1.2-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 05:10 ./slackware64/kdei/koffice-l10n-zh_TW-2.1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 7659 2010-05-16 18:19 ./slackware64/kdei/maketag +-rw-r--r-- 1 root root 7659 2010-05-16 18:19 ./slackware64/kdei/maketag.ez +-rw-r--r-- 1 root root 1515 2010-05-16 18:19 ./slackware64/kdei/tagfile +drwxr-xr-x 2 root root 36864 2010-05-18 22:33 ./slackware64/l +-rw-r--r-- 1 root root 330 2010-05-04 00:51 ./slackware64/l/ConsoleKit-20100129-x86_64-1.txt +-rw-r--r-- 1 root root 96712 2010-05-04 00:51 ./slackware64/l/ConsoleKit-20100129-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 00:51 ./slackware64/l/ConsoleKit-20100129-x86_64-1.txz.asc -rw-r--r-- 1 root root 592 2009-04-30 21:19 ./slackware64/l/M2Crypto-0.19.1-x86_64-2.txt -rw-r--r-- 1 root root 212264 2009-04-30 21:19 ./slackware64/l/M2Crypto-0.19.1-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-04-30 21:19 ./slackware64/l/M2Crypto-0.19.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 276 2009-04-30 21:41 ./slackware64/l/PyQt-4.4.4-x86_64-2.txt --rw-r--r-- 1 root root 7003204 2009-04-30 21:41 ./slackware64/l/PyQt-4.4.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-30 21:41 ./slackware64/l/PyQt-4.4.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 670 2009-05-01 08:15 ./slackware64/l/QScintilla-2.3.2-x86_64-2.txt --rw-r--r-- 1 root root 1052696 2009-05-01 08:15 ./slackware64/l/QScintilla-2.3.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-01 08:15 ./slackware64/l/QScintilla-2.3.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 276 2010-05-04 00:58 ./slackware64/l/PyQt-4.7.3-x86_64-1.txt +-rw-r--r-- 1 root root 8095348 2010-05-04 00:58 ./slackware64/l/PyQt-4.7.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 00:58 ./slackware64/l/PyQt-4.7.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 670 2010-05-04 01:01 ./slackware64/l/QScintilla-2.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 1153356 2010-05-04 01:01 ./slackware64/l/QScintilla-2.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:01 ./slackware64/l/QScintilla-2.4.3-x86_64-1.txz.asc -rw-r--r-- 1 root root 995 2008-10-23 12:12 ./slackware64/l/aalib-1.4rc5-x86_64-2.txt -rw-r--r-- 1 root root 148996 2008-10-23 12:12 ./slackware64/l/aalib-1.4rc5-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-23 12:12 ./slackware64/l/aalib-1.4rc5-x86_64-2.txz.asc --rw-r--r-- 1 root root 383 2009-04-30 20:06 ./slackware64/l/akonadi-1.1.2-x86_64-1.txt --rw-r--r-- 1 root root 404084 2009-04-30 20:06 ./slackware64/l/akonadi-1.1.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-30 20:06 ./slackware64/l/akonadi-1.1.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 402 2009-05-02 09:42 ./slackware64/l/alsa-lib-1.0.18-x86_64-2.txt --rw-r--r-- 1 root root 364108 2009-05-02 09:42 ./slackware64/l/alsa-lib-1.0.18-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-02 09:42 ./slackware64/l/alsa-lib-1.0.18-x86_64-2.txz.asc +-rw-r--r-- 1 root root 383 2010-05-06 05:32 ./slackware64/l/akonadi-1.3.1-x86_64-1.txt +-rw-r--r-- 1 root root 535736 2010-05-06 05:32 ./slackware64/l/akonadi-1.3.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-06 05:32 ./slackware64/l/akonadi-1.3.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 402 2010-04-29 23:46 ./slackware64/l/alsa-lib-1.0.23-x86_64-1.txt +-rw-r--r-- 1 root root 371452 2010-04-29 23:46 ./slackware64/l/alsa-lib-1.0.23-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 23:46 ./slackware64/l/alsa-lib-1.0.23-x86_64-1.txz.asc -rw-r--r-- 1 root root 503 2008-10-03 21:46 ./slackware64/l/alsa-oss-1.0.17-x86_64-1.txt -rw-r--r-- 1 root root 31944 2008-10-03 21:46 ./slackware64/l/alsa-oss-1.0.17-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-03 21:46 ./slackware64/l/alsa-oss-1.0.17-x86_64-1.txz.asc --rw-r--r-- 1 root root 275 2009-08-06 23:07 ./slackware64/l/apr-1.3.8-x86_64-1.txt --rw-r--r-- 1 root root 220360 2009-08-06 23:07 ./slackware64/l/apr-1.3.8-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-06 23:07 ./slackware64/l/apr-1.3.8-x86_64-1.txz.asc --rw-r--r-- 1 root root 483 2009-08-06 23:09 ./slackware64/l/apr-util-1.3.9-x86_64-1.txt --rw-r--r-- 1 root root 114340 2009-08-06 23:09 ./slackware64/l/apr-util-1.3.9-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-06 23:09 ./slackware64/l/apr-util-1.3.9-x86_64-1.txz.asc +-rw-r--r-- 1 root root 275 2010-03-05 21:07 ./slackware64/l/apr-1.3.9-x86_64-1.txt +-rw-r--r-- 1 root root 203908 2010-03-05 21:07 ./slackware64/l/apr-1.3.9-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-05 21:07 ./slackware64/l/apr-1.3.9-x86_64-1.txz.asc +-rw-r--r-- 1 root root 483 2010-03-05 21:20 ./slackware64/l/apr-util-1.3.9-x86_64-2.txt +-rw-r--r-- 1 root root 115492 2010-03-05 21:20 ./slackware64/l/apr-util-1.3.9-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-03-05 21:20 ./slackware64/l/apr-util-1.3.9-x86_64-2.txz.asc -rw-r--r-- 1 root root 251 2008-10-03 20:52 ./slackware64/l/aspell-0.60.5-x86_64-2.txt -rw-r--r-- 1 root root 598772 2008-10-03 20:52 ./slackware64/l/aspell-0.60.5-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-03 20:52 ./slackware64/l/aspell-0.60.5-x86_64-2.txz.asc -rw-r--r-- 1 root root 175 2008-10-03 20:58 ./slackware64/l/aspell-en-6.0_0-noarch-4.txt -rw-r--r-- 1 root root 1090944 2008-10-03 20:58 ./slackware64/l/aspell-en-6.0_0-noarch-4.txz -rw-r--r-- 1 root root 197 2008-10-03 20:58 ./slackware64/l/aspell-en-6.0_0-noarch-4.txz.asc --rw-r--r-- 1 root root 173 2009-04-01 10:18 ./slackware64/l/atk-1.26.0-x86_64-1.txt --rw-r--r-- 1 root root 227492 2009-04-01 10:18 ./slackware64/l/atk-1.26.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-01 10:18 ./slackware64/l/atk-1.26.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 173 2010-04-30 00:35 ./slackware64/l/atk-1.30.0-x86_64-1.txt +-rw-r--r-- 1 root root 232352 2010-04-30 00:35 ./slackware64/l/atk-1.30.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 00:35 ./slackware64/l/atk-1.30.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 373 2010-05-04 01:02 ./slackware64/l/attica-0.1.3-x86_64-1.txt +-rw-r--r-- 1 root root 112608 2010-05-04 01:02 ./slackware64/l/attica-0.1.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:02 ./slackware64/l/attica-0.1.3-x86_64-1.txz.asc -rw-r--r-- 1 root root 315 2008-10-13 20:08 ./slackware64/l/audiofile-0.2.6-x86_64-2.txt -rw-r--r-- 1 root root 118384 2008-10-13 20:08 ./slackware64/l/audiofile-0.2.6-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-13 20:08 ./slackware64/l/audiofile-0.2.6-x86_64-2.txz.asc -rw-r--r-- 1 root root 454 2009-01-22 19:43 ./slackware64/l/automoc4-0.9.88-x86_64-1.txt -rw-r--r-- 1 root root 25480 2009-01-22 19:43 ./slackware64/l/automoc4-0.9.88-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-01-22 19:43 ./slackware64/l/automoc4-0.9.88-x86_64-1.txz.asc --rw-r--r-- 1 root root 517 2009-03-05 00:57 ./slackware64/l/babl-0.0.22-x86_64-1.txt --rw-r--r-- 1 root root 77180 2009-03-05 00:57 ./slackware64/l/babl-0.0.22-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-05 00:57 ./slackware64/l/babl-0.0.22-x86_64-1.txz.asc --rw-r--r-- 1 root root 433 2009-08-25 02:32 ./slackware64/l/boost-1.38.0-x86_64-2.txt --rw-r--r-- 1 root root 4493448 2009-08-25 02:32 ./slackware64/l/boost-1.38.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-25 02:32 ./slackware64/l/boost-1.38.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 394 2009-06-09 00:46 ./slackware64/l/cairo-1.8.6-x86_64-3.txt --rw-r--r-- 1 root root 373352 2009-06-09 00:46 ./slackware64/l/cairo-1.8.6-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-09 00:46 ./slackware64/l/cairo-1.8.6-x86_64-3.txz.asc +-rw-r--r-- 1 root root 517 2009-10-28 19:59 ./slackware64/l/babl-0.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 65988 2009-10-28 19:59 ./slackware64/l/babl-0.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-10-28 19:59 ./slackware64/l/babl-0.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 433 2010-05-06 05:24 ./slackware64/l/boost-1.42.0-x86_64-1.txt +-rw-r--r-- 1 root root 4773520 2010-05-06 05:24 ./slackware64/l/boost-1.42.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-06 05:24 ./slackware64/l/boost-1.42.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 394 2010-05-03 05:13 ./slackware64/l/cairo-1.8.8-x86_64-3.txt +-rw-r--r-- 1 root root 378188 2010-05-03 05:13 ./slackware64/l/cairo-1.8.8-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-03 05:13 ./slackware64/l/cairo-1.8.8-x86_64-3.txz.asc -rw-r--r-- 1 root root 472 2008-12-16 19:11 ./slackware64/l/chmlib-0.39-x86_64-1.txt -rw-r--r-- 1 root root 24700 2008-12-16 19:11 ./slackware64/l/chmlib-0.39-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-12-16 19:11 ./slackware64/l/chmlib-0.39-x86_64-1.txz.asc @@ -1739,176 +1773,194 @@ drwxr-xr-x 2 root root 40960 2009-08-25 04:55 ./slackware64/l -rw-r--r-- 1 root root 363 2008-09-29 20:01 ./slackware64/l/db44-4.4.20-x86_64-2.txt -rw-r--r-- 1 root root 705520 2008-09-29 20:01 ./slackware64/l/db44-4.4.20-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-09-29 20:01 ./slackware64/l/db44-4.4.20-x86_64-2.txz.asc --rw-r--r-- 1 root root 222 2009-03-09 21:05 ./slackware64/l/dbus-glib-0.80-x86_64-1.txt --rw-r--r-- 1 root root 111816 2009-03-09 21:05 ./slackware64/l/dbus-glib-0.80-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-09 21:05 ./slackware64/l/dbus-glib-0.80-x86_64-1.txz.asc --rw-r--r-- 1 root root 246 2009-04-30 20:20 ./slackware64/l/dbus-python-0.83.0-x86_64-2.txt --rw-r--r-- 1 root root 106036 2009-04-30 20:20 ./slackware64/l/dbus-python-0.83.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-30 20:20 ./slackware64/l/dbus-python-0.83.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 655 2008-11-05 15:01 ./slackware64/l/desktop-file-utils-0.15-x86_64-1.txt --rw-r--r-- 1 root root 34924 2008-11-05 15:01 ./slackware64/l/desktop-file-utils-0.15-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-05 15:01 ./slackware64/l/desktop-file-utils-0.15-x86_64-1.txz.asc --rw-r--r-- 1 root root 561 2008-12-16 19:38 ./slackware64/l/djvulibre-3.5.21-x86_64-1.txt --rw-r--r-- 1 root root 917520 2008-12-16 19:38 ./slackware64/l/djvulibre-3.5.21-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-16 19:38 ./slackware64/l/djvulibre-3.5.21-x86_64-1.txz.asc --rw-r--r-- 1 root root 257 2009-04-03 15:22 ./slackware64/l/eigen2-r948353-x86_64-1.txt --rw-r--r-- 1 root root 176108 2009-04-03 15:22 ./slackware64/l/eigen2-r948353-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-03 15:22 ./slackware64/l/eigen2-r948353-x86_64-1.txz.asc --rw-r--r-- 1 root root 346 2008-10-03 21:06 ./slackware64/l/enchant-1.4.2-x86_64-1.txt --rw-r--r-- 1 root root 133920 2008-10-03 21:06 ./slackware64/l/enchant-1.4.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-03 21:06 ./slackware64/l/enchant-1.4.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 222 2010-04-30 04:13 ./slackware64/l/dbus-glib-0.86-x86_64-1.txt +-rw-r--r-- 1 root root 117560 2010-04-30 04:13 ./slackware64/l/dbus-glib-0.86-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 04:13 ./slackware64/l/dbus-glib-0.86-x86_64-1.txz.asc +-rw-r--r-- 1 root root 246 2010-04-30 04:14 ./slackware64/l/dbus-python-0.83.1-x86_64-1.txt +-rw-r--r-- 1 root root 106608 2010-04-30 04:14 ./slackware64/l/dbus-python-0.83.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 04:14 ./slackware64/l/dbus-python-0.83.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 655 2010-05-11 14:02 ./slackware64/l/desktop-file-utils-0.16-x86_64-2.txt +-rw-r--r-- 1 root root 45080 2010-05-11 14:02 ./slackware64/l/desktop-file-utils-0.16-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-11 14:02 ./slackware64/l/desktop-file-utils-0.16-x86_64-2.txz.asc +-rw-r--r-- 1 root root 561 2010-02-14 23:33 ./slackware64/l/djvulibre-3.5.22-x86_64-2.txt +-rw-r--r-- 1 root root 935108 2010-02-14 23:33 ./slackware64/l/djvulibre-3.5.22-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-14 23:33 ./slackware64/l/djvulibre-3.5.22-x86_64-2.txz.asc +-rw-r--r-- 1 root root 323 2010-05-04 01:02 ./slackware64/l/ebook-tools-0.1.1-x86_64-2.txt +-rw-r--r-- 1 root root 20544 2010-05-04 01:02 ./slackware64/l/ebook-tools-0.1.1-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:02 ./slackware64/l/ebook-tools-0.1.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 230 2010-05-04 01:04 ./slackware64/l/eggdbus-0.6-x86_64-1.txt +-rw-r--r-- 1 root root 276116 2010-05-04 01:04 ./slackware64/l/eggdbus-0.6-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:04 ./slackware64/l/eggdbus-0.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2009-12-17 02:23 ./slackware64/l/eigen2-2.0.10-x86_64-1.txt +-rw-r--r-- 1 root root 161064 2009-12-17 02:23 ./slackware64/l/eigen2-2.0.10-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-17 02:23 ./slackware64/l/eigen2-2.0.10-x86_64-1.txz.asc +-rw-r--r-- 1 root root 346 2009-12-17 03:02 ./slackware64/l/enchant-1.5.0-x86_64-1.txt +-rw-r--r-- 1 root root 137616 2009-12-17 03:02 ./slackware64/l/enchant-1.5.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-17 03:02 ./slackware64/l/enchant-1.5.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 505 2009-04-08 20:17 ./slackware64/l/esound-0.2.41-x86_64-1.txt -rw-r--r-- 1 root root 98952 2009-04-08 20:17 ./slackware64/l/esound-0.2.41-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-04-08 20:17 ./slackware64/l/esound-0.2.41-x86_64-1.txz.asc --rw-r--r-- 1 root root 257 2009-06-22 19:24 ./slackware64/l/exiv2-0.18.1-x86_64-1.txt --rw-r--r-- 1 root root 705080 2009-06-22 19:24 ./slackware64/l/exiv2-0.18.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-22 19:24 ./slackware64/l/exiv2-0.18.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2009-12-17 02:22 ./slackware64/l/exiv2-0.18.2-x86_64-1.txt +-rw-r--r-- 1 root root 729632 2009-12-17 02:22 ./slackware64/l/exiv2-0.18.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-17 02:22 ./slackware64/l/exiv2-0.18.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 264 2008-09-28 21:05 ./slackware64/l/expat-2.0.1-x86_64-1.txt -rw-r--r-- 1 root root 109568 2008-09-28 21:05 ./slackware64/l/expat-2.0.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-09-28 21:05 ./slackware64/l/expat-2.0.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 344 2009-03-14 10:43 ./slackware64/l/freetype-2.3.9-x86_64-1.txt --rw-r--r-- 1 root root 406944 2009-03-14 10:43 ./slackware64/l/freetype-2.3.9-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-14 10:43 ./slackware64/l/freetype-2.3.9-x86_64-1.txz.asc +-rw-r--r-- 1 root root 506 2009-12-17 01:50 ./slackware64/l/fftw-3.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 1060684 2009-12-17 01:50 ./slackware64/l/fftw-3.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-17 01:50 ./slackware64/l/fftw-3.2.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 344 2010-03-12 00:34 ./slackware64/l/freetype-2.3.12-x86_64-1.txt +-rw-r--r-- 1 root root 415240 2010-03-12 00:34 ./slackware64/l/freetype-2.3.12-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-12 00:34 ./slackware64/l/freetype-2.3.12-x86_64-1.txz.asc -rw-r--r-- 1 root root 353 2008-10-08 20:29 ./slackware64/l/fribidi-0.10.9-x86_64-2.txt -rw-r--r-- 1 root root 45716 2008-10-08 20:29 ./slackware64/l/fribidi-0.10.9-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-08 20:29 ./slackware64/l/fribidi-0.10.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 391 2008-10-22 23:03 ./slackware64/l/fuse-2.7.4-x86_64-2.txt --rw-r--r-- 1 root root 113692 2008-10-22 23:03 ./slackware64/l/fuse-2.7.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-22 23:03 ./slackware64/l/fuse-2.7.4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 391 2010-02-09 21:37 ./slackware64/l/fuse-2.8.1-x86_64-1.txt +-rw-r--r-- 1 root root 122084 2010-02-09 21:37 ./slackware64/l/fuse-2.8.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-09 21:37 ./slackware64/l/fuse-2.8.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 297 2009-04-30 20:22 ./slackware64/l/gamin-0.1.10-x86_64-2.txt -rw-r--r-- 1 root root 98416 2009-04-30 20:22 ./slackware64/l/gamin-0.1.10-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-04-30 20:22 ./slackware64/l/gamin-0.1.10-x86_64-2.txz.asc --rw-r--r-- 1 root root 469 2009-06-09 00:40 ./slackware64/l/gd-2.0.35-x86_64-3.txt --rw-r--r-- 1 root root 144172 2009-06-09 00:40 ./slackware64/l/gd-2.0.35-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-09 00:40 ./slackware64/l/gd-2.0.35-x86_64-3.txz.asc +-rw-r--r-- 1 root root 469 2010-02-18 03:20 ./slackware64/l/gd-2.0.35-x86_64-4.txt +-rw-r--r-- 1 root root 145516 2010-02-18 03:20 ./slackware64/l/gd-2.0.35-x86_64-4.txz +-rw-r--r-- 1 root root 197 2010-02-18 03:20 ./slackware64/l/gd-2.0.35-x86_64-4.txz.asc -rw-r--r-- 1 root root 186 2008-09-28 22:46 ./slackware64/l/gdbm-1.8.3-x86_64-4.txt -rw-r--r-- 1 root root 43824 2008-09-28 22:46 ./slackware64/l/gdbm-1.8.3-x86_64-4.txz -rw-r--r-- 1 root root 197 2008-09-28 22:46 ./slackware64/l/gdbm-1.8.3-x86_64-4.txz.asc --rw-r--r-- 1 root root 405 2009-06-09 19:00 ./slackware64/l/gegl-0.0.22-x86_64-1.txt --rw-r--r-- 1 root root 345144 2009-06-09 19:00 ./slackware64/l/gegl-0.0.22-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 19:00 ./slackware64/l/gegl-0.0.22-x86_64-1.txz.asc +-rw-r--r-- 1 root root 405 2010-02-16 04:20 ./slackware64/l/gegl-0.1.0-x86_64-2.txt +-rw-r--r-- 1 root root 299344 2010-02-16 04:20 ./slackware64/l/gegl-0.1.0-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-16 04:20 ./slackware64/l/gegl-0.1.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 320 2010-02-06 22:20 ./slackware64/l/giflib-4.1.6-x86_64-1.txt +-rw-r--r-- 1 root root 171608 2010-02-06 22:20 ./slackware64/l/giflib-4.1.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-06 22:20 ./slackware64/l/giflib-4.1.6-x86_64-1.txz.asc -rw-r--r-- 1 root root 302 2008-09-28 19:59 ./slackware64/l/glib-1.2.10-x86_64-3.txt -rw-r--r-- 1 root root 146248 2008-09-28 19:59 ./slackware64/l/glib-1.2.10-x86_64-3.txz -rw-r--r-- 1 root root 197 2008-09-28 19:59 ./slackware64/l/glib-1.2.10-x86_64-3.txz.asc --rw-r--r-- 1 root root 235 2009-03-29 10:41 ./slackware64/l/glib2-2.18.4-x86_64-1.txt --rw-r--r-- 1 root root 1770076 2009-03-29 10:41 ./slackware64/l/glib2-2.18.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-29 10:41 ./slackware64/l/glib2-2.18.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 389 2009-04-04 22:46 ./slackware64/l/glibc-2.9-x86_64-3.txt --rw-r--r-- 1 root root 10948996 2009-04-04 22:46 ./slackware64/l/glibc-2.9-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-04-04 22:46 ./slackware64/l/glibc-2.9-x86_64-3.txz.asc --rw-r--r-- 1 root root 333 2009-04-04 22:44 ./slackware64/l/glibc-i18n-2.9-x86_64-3.txt --rw-r--r-- 1 root root 5890028 2009-04-04 22:44 ./slackware64/l/glibc-i18n-2.9-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-04-04 22:44 ./slackware64/l/glibc-i18n-2.9-x86_64-3.txz.asc --rw-r--r-- 1 root root 508 2009-04-04 22:43 ./slackware64/l/glibc-profile-2.9-x86_64-3.txt --rw-r--r-- 1 root root 1096816 2009-04-04 22:43 ./slackware64/l/glibc-profile-2.9-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-04-04 22:43 ./slackware64/l/glibc-profile-2.9-x86_64-3.txz.asc --rw-r--r-- 1 root root 297 2008-10-08 21:08 ./slackware64/l/gmime-2.2.23-x86_64-1.txt --rw-r--r-- 1 root root 285512 2008-10-08 21:08 ./slackware64/l/gmime-2.2.23-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-08 21:08 ./slackware64/l/gmime-2.2.23-x86_64-1.txz.asc +-rw-r--r-- 1 root root 235 2010-04-30 00:14 ./slackware64/l/glib2-2.22.5-x86_64-1.txt +-rw-r--r-- 1 root root 2018660 2010-04-30 00:14 ./slackware64/l/glib2-2.22.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 00:14 ./slackware64/l/glib2-2.22.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 389 2010-05-13 06:24 ./slackware64/l/glibc-2.11.1-x86_64-3.txt +-rw-r--r-- 1 root root 11927760 2010-05-13 06:24 ./slackware64/l/glibc-2.11.1-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-13 06:24 ./slackware64/l/glibc-2.11.1-x86_64-3.txz.asc +-rw-r--r-- 1 root root 333 2010-05-13 06:23 ./slackware64/l/glibc-i18n-2.11.1-x86_64-3.txt +-rw-r--r-- 1 root root 6605844 2010-05-13 06:23 ./slackware64/l/glibc-i18n-2.11.1-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-13 06:23 ./slackware64/l/glibc-i18n-2.11.1-x86_64-3.txz.asc +-rw-r--r-- 1 root root 508 2010-05-13 06:22 ./slackware64/l/glibc-profile-2.11.1-x86_64-3.txt +-rw-r--r-- 1 root root 1125268 2010-05-13 06:22 ./slackware64/l/glibc-profile-2.11.1-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-13 06:22 ./slackware64/l/glibc-profile-2.11.1-x86_64-3.txz.asc +-rw-r--r-- 1 root root 297 2010-02-03 23:45 ./slackware64/l/gmime-2.4.15-x86_64-1.txt +-rw-r--r-- 1 root root 245244 2010-02-03 23:45 ./slackware64/l/gmime-2.4.15-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-03 23:45 ./slackware64/l/gmime-2.4.15-x86_64-1.txz.asc -rw-r--r-- 1 root root 579 2008-12-16 19:49 ./slackware64/l/gmm-3.1-noarch-1.txt -rw-r--r-- 1 root root 110636 2008-12-16 19:49 ./slackware64/l/gmm-3.1-noarch-1.txz -rw-r--r-- 1 root root 197 2008-12-16 19:49 ./slackware64/l/gmm-3.1-noarch-1.txz.asc --rw-r--r-- 1 root root 312 2009-03-03 23:40 ./slackware64/l/gmp-4.2.4-x86_64-1.txt --rw-r--r-- 1 root root 344696 2009-03-03 23:40 ./slackware64/l/gmp-4.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-03 23:40 ./slackware64/l/gmp-4.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 299 2009-07-14 21:49 ./slackware64/l/gnome-icon-theme-2.26.0-x86_64-1.txt --rw-r--r-- 1 root root 2813824 2009-07-14 21:49 ./slackware64/l/gnome-icon-theme-2.26.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-14 21:49 ./slackware64/l/gnome-icon-theme-2.26.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 609 2009-06-09 18:50 ./slackware64/l/gst-plugins-base-0.10.23-x86_64-1.txt --rw-r--r-- 1 root root 1029512 2009-06-09 18:50 ./slackware64/l/gst-plugins-base-0.10.23-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 18:50 ./slackware64/l/gst-plugins-base-0.10.23-x86_64-1.txz.asc --rw-r--r-- 1 root root 602 2009-06-09 18:44 ./slackware64/l/gstreamer-0.10.23-x86_64-1.txt --rw-r--r-- 1 root root 1027328 2009-06-09 18:44 ./slackware64/l/gstreamer-0.10.23-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 18:44 ./slackware64/l/gstreamer-0.10.23-x86_64-1.txz.asc +-rw-r--r-- 1 root root 312 2010-02-24 02:23 ./slackware64/l/gmp-5.0.1-x86_64-1.txt +-rw-r--r-- 1 root root 469224 2010-02-24 02:23 ./slackware64/l/gmp-5.0.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-24 02:23 ./slackware64/l/gmp-5.0.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 299 2010-04-30 05:13 ./slackware64/l/gnome-icon-theme-2.30.2-x86_64-1.txt +-rw-r--r-- 1 root root 7996060 2010-04-30 05:13 ./slackware64/l/gnome-icon-theme-2.30.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 05:13 ./slackware64/l/gnome-icon-theme-2.30.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 609 2010-04-30 05:50 ./slackware64/l/gst-plugins-base-0.10.29-x86_64-1.txt +-rw-r--r-- 1 root root 992124 2010-04-30 05:50 ./slackware64/l/gst-plugins-base-0.10.29-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 05:50 ./slackware64/l/gst-plugins-base-0.10.29-x86_64-1.txz.asc +-rw-r--r-- 1 root root 444 2010-04-30 05:52 ./slackware64/l/gst-plugins-good-0.10.22-x86_64-1.txt +-rw-r--r-- 1 root root 807236 2010-04-30 05:52 ./slackware64/l/gst-plugins-good-0.10.22-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 05:52 ./slackware64/l/gst-plugins-good-0.10.22-x86_64-1.txz.asc +-rw-r--r-- 1 root root 602 2010-04-30 05:35 ./slackware64/l/gstreamer-0.10.29-x86_64-1.txt +-rw-r--r-- 1 root root 1065376 2010-04-30 05:35 ./slackware64/l/gstreamer-0.10.29-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 05:35 ./slackware64/l/gstreamer-0.10.29-x86_64-1.txz.asc -rw-r--r-- 1 root root 351 2009-06-09 02:23 ./slackware64/l/gtk+-1.2.10-x86_64-5.txt -rw-r--r-- 1 root root 1046588 2009-06-09 02:23 ./slackware64/l/gtk+-1.2.10-x86_64-5.txz -rw-r--r-- 1 root root 197 2009-06-09 02:23 ./slackware64/l/gtk+-1.2.10-x86_64-5.txz.asc --rw-r--r-- 1 root root 335 2009-06-11 17:25 ./slackware64/l/gtk+2-2.14.7-x86_64-4.txt --rw-r--r-- 1 root root 5980120 2009-06-11 17:25 ./slackware64/l/gtk+2-2.14.7-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-11 17:25 ./slackware64/l/gtk+2-2.14.7-x86_64-4.txz.asc +-rw-r--r-- 1 root root 335 2010-04-30 01:54 ./slackware64/l/gtk+2-2.18.9-x86_64-1.txt +-rw-r--r-- 1 root root 6534268 2010-04-30 01:54 ./slackware64/l/gtk+2-2.18.9-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 01:54 ./slackware64/l/gtk+2-2.18.9-x86_64-1.txz.asc -rw-r--r-- 1 root root 330 2009-06-09 05:28 ./slackware64/l/gtkspell-2.0.15-x86_64-1.txt -rw-r--r-- 1 root root 32692 2009-06-09 05:28 ./slackware64/l/gtkspell-2.0.15-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-09 05:28 ./slackware64/l/gtkspell-2.0.15-x86_64-1.txz.asc --rw-r--r-- 1 root root 601 2009-08-01 05:47 ./slackware64/l/hal-0.5.11-x86_64-6.txt --rw-r--r-- 1 root root 572964 2009-08-01 05:47 ./slackware64/l/hal-0.5.11-x86_64-6.txz --rw-r--r-- 1 root root 197 2009-08-01 05:47 ./slackware64/l/hal-0.5.11-x86_64-6.txz.asc --rw-r--r-- 1 root root 297 2009-08-01 05:48 ./slackware64/l/hal-info-20090716-noarch-1.txt --rw-r--r-- 1 root root 46420 2009-08-01 05:48 ./slackware64/l/hal-info-20090716-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-01 05:48 ./slackware64/l/hal-info-20090716-noarch-1.txz.asc --rw-r--r-- 1 root root 445 2009-03-14 10:54 ./slackware64/l/hicolor-icon-theme-0.10-noarch-5.txt --rw-r--r-- 1 root root 11656 2009-03-14 10:54 ./slackware64/l/hicolor-icon-theme-0.10-noarch-5.txz --rw-r--r-- 1 root root 197 2009-03-14 10:54 ./slackware64/l/hicolor-icon-theme-0.10-noarch-5.txz.asc +-rw-r--r-- 1 root root 464 2010-03-13 00:58 ./slackware64/l/hal-0.5.14-x86_64-2.txt +-rw-r--r-- 1 root root 487564 2010-03-13 00:58 ./slackware64/l/hal-0.5.14-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-03-13 00:58 ./slackware64/l/hal-0.5.14-x86_64-2.txz.asc +-rw-r--r-- 1 root root 297 2010-02-09 03:17 ./slackware64/l/hal-info-20091130-noarch-1.txt +-rw-r--r-- 1 root root 47520 2010-02-09 03:17 ./slackware64/l/hal-info-20091130-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-09 03:17 ./slackware64/l/hal-info-20091130-noarch-1.txz.asc +-rw-r--r-- 1 root root 445 2010-04-30 00:40 ./slackware64/l/hicolor-icon-theme-0.12-noarch-1.txt +-rw-r--r-- 1 root root 11776 2010-04-30 00:40 ./slackware64/l/hicolor-icon-theme-0.12-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 00:40 ./slackware64/l/hicolor-icon-theme-0.12-noarch-1.txz.asc +-rw-r--r-- 1 root root 509 2010-05-04 01:04 ./slackware64/l/hunspell-1.2.9-x86_64-1.txt +-rw-r--r-- 1 root root 234676 2010-05-04 01:04 ./slackware64/l/hunspell-1.2.9-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:04 ./slackware64/l/hunspell-1.2.9-x86_64-1.txz.asc -rw-r--r-- 1 root root 464 2009-08-22 19:44 ./slackware64/l/icon-naming-utils-0.8.90-x86_64-2.txt -rw-r--r-- 1 root root 14068 2009-08-22 19:44 ./slackware64/l/icon-naming-utils-0.8.90-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-08-22 19:44 ./slackware64/l/icon-naming-utils-0.8.90-x86_64-2.txz.asc -rw-r--r-- 1 root root 371 2008-12-16 19:54 ./slackware64/l/ilmbase-1.0.1-x86_64-1.txt -rw-r--r-- 1 root root 108700 2008-12-16 19:54 ./slackware64/l/ilmbase-1.0.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-12-16 19:54 ./slackware64/l/ilmbase-1.0.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 401 2009-08-11 04:01 ./slackware64/l/imlib-1.9.15-x86_64-5.txt --rw-r--r-- 1 root root 463196 2009-08-11 04:01 ./slackware64/l/imlib-1.9.15-x86_64-5.txz --rw-r--r-- 1 root root 197 2009-08-11 04:01 ./slackware64/l/imlib-1.9.15-x86_64-5.txz.asc +-rw-r--r-- 1 root root 401 2010-02-11 21:11 ./slackware64/l/imlib-1.9.15-x86_64-6.txt +-rw-r--r-- 1 root root 466824 2010-02-11 21:11 ./slackware64/l/imlib-1.9.15-x86_64-6.txz +-rw-r--r-- 1 root root 197 2010-02-11 21:11 ./slackware64/l/imlib-1.9.15-x86_64-6.txz.asc -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/l/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/l/install.end -rw-r--r-- 1 root root 392 2009-04-03 19:12 ./slackware64/l/iso-codes-3.8-noarch-1.txt -rw-r--r-- 1 root root 1042596 2009-04-03 19:12 ./slackware64/l/iso-codes-3.8-noarch-1.txz -rw-r--r-- 1 root root 197 2009-04-03 19:12 ./slackware64/l/iso-codes-3.8-noarch-1.txz.asc --rw-r--r-- 1 root root 382 2009-06-09 01:00 ./slackware64/l/jasper-1.900.1-x86_64-2.txt --rw-r--r-- 1 root root 156644 2009-06-09 01:00 ./slackware64/l/jasper-1.900.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 01:00 ./slackware64/l/jasper-1.900.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 554 2009-08-13 21:40 ./slackware64/l/jre-6u16-x86_64-1.txt --rw-r--r-- 1 root root 19434728 2009-08-13 21:40 ./slackware64/l/jre-6u16-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-13 21:40 ./slackware64/l/jre-6u16-x86_64-1.txz.asc --rw-r--r-- 1 root root 210 2009-03-24 10:31 ./slackware64/l/lcms-1.18-x86_64-1.txt --rw-r--r-- 1 root root 176456 2009-03-24 10:31 ./slackware64/l/lcms-1.18-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-24 10:31 ./slackware64/l/lcms-1.18-x86_64-1.txz.asc --rw-r--r-- 1 root root 526 2009-06-09 05:54 ./slackware64/l/lesstif-0.95.0-x86_64-5.txt --rw-r--r-- 1 root root 1382932 2009-06-09 05:54 ./slackware64/l/lesstif-0.95.0-x86_64-5.txz --rw-r--r-- 1 root root 197 2009-06-09 05:54 ./slackware64/l/lesstif-0.95.0-x86_64-5.txz.asc --rw-r--r-- 1 root root 505 2008-10-08 21:20 ./slackware64/l/libaio-0.3.106-x86_64-1.txt --rw-r--r-- 1 root root 12992 2008-10-08 21:20 ./slackware64/l/libaio-0.3.106-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-08 21:20 ./slackware64/l/libaio-0.3.106-x86_64-1.txz.asc +-rw-r--r-- 1 root root 382 2010-02-11 20:19 ./slackware64/l/jasper-1.900.1-x86_64-3.txt +-rw-r--r-- 1 root root 158076 2010-02-11 20:19 ./slackware64/l/jasper-1.900.1-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-11 20:19 ./slackware64/l/jasper-1.900.1-x86_64-3.txz.asc +-rw-r--r-- 1 root root 554 2010-05-09 01:28 ./slackware64/l/jre-6u20-x86_64-1.txt +-rw-r--r-- 1 root root 19618716 2010-05-09 01:28 ./slackware64/l/jre-6u20-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-09 01:28 ./slackware64/l/jre-6u20-x86_64-1.txz.asc +-rw-r--r-- 1 root root 210 2010-02-20 05:52 ./slackware64/l/lcms-1.19-x86_64-1.txt +-rw-r--r-- 1 root root 178476 2010-02-20 05:52 ./slackware64/l/lcms-1.19-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-20 05:52 ./slackware64/l/lcms-1.19-x86_64-1.txz.asc +-rw-r--r-- 1 root root 526 2010-04-19 20:13 ./slackware64/l/lesstif-0.95.2-x86_64-1.txt +-rw-r--r-- 1 root root 1397028 2010-04-19 20:13 ./slackware64/l/lesstif-0.95.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-19 20:13 ./slackware64/l/lesstif-0.95.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 505 2010-05-11 01:13 ./slackware64/l/libaio-0.3.109-x86_64-1.txt +-rw-r--r-- 1 root root 13524 2010-05-11 01:13 ./slackware64/l/libaio-0.3.109-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-11 01:13 ./slackware64/l/libaio-0.3.109-x86_64-1.txz.asc -rw-r--r-- 1 root root 428 2008-10-08 21:22 ./slackware64/l/libao-0.8.8-x86_64-1.txt -rw-r--r-- 1 root root 35288 2008-10-08 21:22 ./slackware64/l/libao-0.8.8-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-08 21:22 ./slackware64/l/libao-0.8.8-x86_64-1.txz.asc --rw-r--r-- 1 root root 415 2009-03-08 22:47 ./slackware64/l/libarchive-2.6.2-x86_64-1.txt --rw-r--r-- 1 root root 177548 2009-03-08 22:47 ./slackware64/l/libarchive-2.6.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-08 22:47 ./slackware64/l/libarchive-2.6.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 415 2010-03-06 19:41 ./slackware64/l/libarchive-2.8.0-x86_64-1.txt +-rw-r--r-- 1 root root 230844 2010-03-06 19:41 ./slackware64/l/libarchive-2.8.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-06 19:41 ./slackware64/l/libarchive-2.8.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 361 2008-10-08 21:23 ./slackware64/l/libart_lgpl-2.3.20-x86_64-1.txt -rw-r--r-- 1 root root 74044 2008-10-08 21:23 ./slackware64/l/libart_lgpl-2.3.20-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-08 21:23 ./slackware64/l/libart_lgpl-2.3.20-x86_64-1.txz.asc -rw-r--r-- 1 root root 359 2009-06-09 01:22 ./slackware64/l/libcaca-0.99.beta16-x86_64-3.txt -rw-r--r-- 1 root root 433140 2009-06-09 01:22 ./slackware64/l/libcaca-0.99.beta16-x86_64-3.txz -rw-r--r-- 1 root root 197 2009-06-09 01:22 ./slackware64/l/libcaca-0.99.beta16-x86_64-3.txz.asc --rw-r--r-- 1 root root 380 2009-04-11 20:17 ./slackware64/l/libcap-2.16-x86_64-2.txt --rw-r--r-- 1 root root 48764 2009-04-11 20:17 ./slackware64/l/libcap-2.16-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-11 20:17 ./slackware64/l/libcap-2.16-x86_64-2.txz.asc +-rw-r--r-- 1 root root 380 2010-05-05 05:58 ./slackware64/l/libcap-2.19-x86_64-1.txt +-rw-r--r-- 1 root root 52292 2010-05-05 05:58 ./slackware64/l/libcap-2.19-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 05:58 ./slackware64/l/libcap-2.19-x86_64-1.txz.asc -rw-r--r-- 1 root root 328 2008-10-08 21:31 ./slackware64/l/libcddb-1.3.0-x86_64-1.txt -rw-r--r-- 1 root root 64056 2008-10-08 21:31 ./slackware64/l/libcddb-1.3.0-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-08 21:31 ./slackware64/l/libcddb-1.3.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 554 2008-10-08 21:33 ./slackware64/l/libcdio-0.79-x86_64-1.txt -rw-r--r-- 1 root root 280832 2008-10-08 21:33 ./slackware64/l/libcdio-0.79-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-08 21:33 ./slackware64/l/libcdio-0.79-x86_64-1.txz.asc +-rw-r--r-- 1 root root 480 2010-05-04 01:04 ./slackware64/l/libdiscid-0.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 19936 2010-05-04 01:04 ./slackware64/l/libdiscid-0.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:04 ./slackware64/l/libdiscid-0.2.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 398 2009-03-09 11:04 ./slackware64/l/libdvdread-4.1.3-x86_64-1.txt -rw-r--r-- 1 root root 69700 2009-03-09 11:04 ./slackware64/l/libdvdread-4.1.3-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-09 11:04 ./slackware64/l/libdvdread-4.1.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 397 2008-10-08 21:39 ./slackware64/l/libexif-0.6.16-x86_64-1.txt --rw-r--r-- 1 root root 154192 2008-10-08 21:39 ./slackware64/l/libexif-0.6.16-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-08 21:39 ./slackware64/l/libexif-0.6.16-x86_64-1.txz.asc --rw-r--r-- 1 root root 349 2009-06-09 05:43 ./slackware64/l/libglade-2.6.4-x86_64-2.txt --rw-r--r-- 1 root root 78356 2009-06-09 05:43 ./slackware64/l/libglade-2.6.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 05:43 ./slackware64/l/libglade-2.6.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 293 2009-06-09 19:18 ./slackware64/l/libgphoto2-2.4.6-x86_64-1.txt --rw-r--r-- 1 root root 939364 2009-06-09 19:18 ./slackware64/l/libgphoto2-2.4.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 19:18 ./slackware64/l/libgphoto2-2.4.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 397 2010-02-07 23:29 ./slackware64/l/libexif-0.6.19-x86_64-1.txt +-rw-r--r-- 1 root root 280152 2010-02-07 23:29 ./slackware64/l/libexif-0.6.19-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-07 23:29 ./slackware64/l/libexif-0.6.19-x86_64-1.txz.asc +-rw-r--r-- 1 root root 349 2010-04-25 20:44 ./slackware64/l/libglade-2.6.4-x86_64-4.txt +-rw-r--r-- 1 root root 89064 2010-04-25 20:44 ./slackware64/l/libglade-2.6.4-x86_64-4.txz +-rw-r--r-- 1 root root 198 2010-04-25 20:44 ./slackware64/l/libglade-2.6.4-x86_64-4.txz.asc +-rw-r--r-- 1 root root 293 2010-04-29 02:46 ./slackware64/l/libgphoto2-2.4.9-x86_64-1.txt +-rw-r--r-- 1 root root 1026504 2010-04-29 02:46 ./slackware64/l/libgphoto2-2.4.9-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 02:46 ./slackware64/l/libgphoto2-2.4.9-x86_64-1.txz.asc -rw-r--r-- 1 root root 518 2009-06-07 20:32 ./slackware64/l/libgpod-0.7.2-x86_64-1.txt -rw-r--r-- 1 root root 270828 2009-06-07 20:32 ./slackware64/l/libgpod-0.7.2-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-07 20:32 ./slackware64/l/libgpod-0.7.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 336 2009-07-13 17:15 ./slackware64/l/libgsf-1.14.15-x86_64-1.txt --rw-r--r-- 1 root root 180184 2009-07-13 17:15 ./slackware64/l/libgsf-1.14.15-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-13 17:15 ./slackware64/l/libgsf-1.14.15-x86_64-1.txz.asc --rw-r--r-- 1 root root 340 2009-06-09 00:50 ./slackware64/l/libgtkhtml-2.11.1-x86_64-2.txt --rw-r--r-- 1 root root 167168 2009-06-09 00:50 ./slackware64/l/libgtkhtml-2.11.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 00:50 ./slackware64/l/libgtkhtml-2.11.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 336 2010-02-07 03:26 ./slackware64/l/libgsf-1.14.16-x86_64-1.txt +-rw-r--r-- 1 root root 198844 2010-02-07 03:26 ./slackware64/l/libgsf-1.14.16-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-07 03:26 ./slackware64/l/libgsf-1.14.16-x86_64-1.txz.asc -rw-r--r-- 1 root root 466 2009-04-03 19:34 ./slackware64/l/libical-0.43-x86_64-1.txt -rw-r--r-- 1 root root 242064 2009-04-03 19:34 ./slackware64/l/libical-0.43-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-04-03 19:34 ./slackware64/l/libical-0.43-x86_64-1.txz.asc @@ -1924,12 +1976,18 @@ drwxr-xr-x 2 root root 40960 2009-08-25 04:55 ./slackware64/l -rw-r--r-- 1 root root 380 2009-04-30 20:35 ./slackware64/l/libieee1284-0.2.11-x86_64-2.txt -rw-r--r-- 1 root root 75032 2009-04-30 20:35 ./slackware64/l/libieee1284-0.2.11-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-04-30 20:35 ./slackware64/l/libieee1284-0.2.11-x86_64-2.txz.asc --rw-r--r-- 1 root root 662 2008-09-28 21:31 ./slackware64/l/libjpeg-6b-x86_64-5.txt --rw-r--r-- 1 root root 225196 2008-09-28 21:31 ./slackware64/l/libjpeg-6b-x86_64-5.txz --rw-r--r-- 1 root root 197 2008-09-28 21:31 ./slackware64/l/libjpeg-6b-x86_64-5.txz.asc +-rw-r--r-- 1 root root 438 2010-05-04 01:05 ./slackware64/l/libiodbc-3.52.7-x86_64-2.txt +-rw-r--r-- 1 root root 260652 2010-05-04 01:05 ./slackware64/l/libiodbc-3.52.7-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:05 ./slackware64/l/libiodbc-3.52.7-x86_64-2.txz.asc +-rw-r--r-- 1 root root 662 2010-04-05 02:34 ./slackware64/l/libjpeg-v8a-x86_64-1.txt +-rw-r--r-- 1 root root 178868 2010-04-05 02:34 ./slackware64/l/libjpeg-v8a-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-05 02:34 ./slackware64/l/libjpeg-v8a-x86_64-1.txz.asc -rw-r--r-- 1 root root 357 2009-06-07 20:28 ./slackware64/l/libkarma-0.1.1-x86_64-1.txt -rw-r--r-- 1 root root 56268 2009-06-07 20:28 ./slackware64/l/libkarma-0.1.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-07 20:28 ./slackware64/l/libkarma-0.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 204 2009-12-19 00:06 ./slackware64/l/liblastfm-0.3.0-x86_64-2.txt +-rw-r--r-- 1 root root 152816 2009-12-19 00:06 ./slackware64/l/liblastfm-0.3.0-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-12-19 00:06 ./slackware64/l/liblastfm-0.3.0-x86_64-2.txz.asc -rw-r--r-- 1 root root 600 2008-10-09 14:07 ./slackware64/l/libmad-0.15.1b-x86_64-3.txt -rw-r--r-- 1 root root 70860 2008-10-09 14:07 ./slackware64/l/libmad-0.15.1b-x86_64-3.txz -rw-r--r-- 1 root root 197 2008-10-09 14:07 ./slackware64/l/libmad-0.15.1b-x86_64-3.txz.asc @@ -1939,164 +1997,179 @@ drwxr-xr-x 2 root root 40960 2009-08-25 04:55 ./slackware64/l -rw-r--r-- 1 root root 509 2009-03-08 23:26 ./slackware64/l/libmcs-0.7.1-x86_64-1.txt -rw-r--r-- 1 root root 16104 2009-03-08 23:26 ./slackware64/l/libmcs-0.7.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-08 23:26 ./slackware64/l/libmcs-0.7.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 484 2008-10-09 14:27 ./slackware64/l/libmng-1.0.10-x86_64-1.txt --rw-r--r-- 1 root root 207044 2008-10-09 14:27 ./slackware64/l/libmng-1.0.10-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-09 14:27 ./slackware64/l/libmng-1.0.10-x86_64-1.txz.asc +-rw-r--r-- 1 root root 484 2010-02-14 23:25 ./slackware64/l/libmng-1.0.10-x86_64-2.txt +-rw-r--r-- 1 root root 211592 2010-02-14 23:25 ./slackware64/l/libmng-1.0.10-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-14 23:25 ./slackware64/l/libmng-1.0.10-x86_64-2.txz.asc -rw-r--r-- 1 root root 399 2008-10-09 13:37 ./slackware64/l/libmowgli-0.6.0-x86_64-1.txt -rw-r--r-- 1 root root 28444 2008-10-09 13:37 ./slackware64/l/libmowgli-0.6.0-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-09 13:37 ./slackware64/l/libmowgli-0.6.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 315 2009-04-30 20:31 ./slackware64/l/libmsn-r96-x86_64-1.txt --rw-r--r-- 1 root root 242684 2009-04-30 20:31 ./slackware64/l/libmsn-r96-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-30 20:31 ./slackware64/l/libmsn-r96-x86_64-1.txz.asc --rw-r--r-- 1 root root 599 2009-06-07 22:23 ./slackware64/l/libmtp-0.3.6-x86_64-1.txt --rw-r--r-- 1 root root 204092 2009-06-07 22:23 ./slackware64/l/libmtp-0.3.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-07 22:23 ./slackware64/l/libmtp-0.3.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 315 2010-05-04 01:05 ./slackware64/l/libmsn-4.1-x86_64-1.txt +-rw-r--r-- 1 root root 264324 2010-05-04 01:05 ./slackware64/l/libmsn-4.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:05 ./slackware64/l/libmsn-4.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 602 2010-05-03 18:41 ./slackware64/l/libmtp-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 244572 2010-05-03 18:41 ./slackware64/l/libmtp-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-03 18:41 ./slackware64/l/libmtp-1.0.1-x86_64-2.txz.asc -rw-r--r-- 1 root root 540 2009-05-23 04:43 ./slackware64/l/libnjb-2.2.6-x86_64-4.txt -rw-r--r-- 1 root root 219696 2009-05-23 04:43 ./slackware64/l/libnjb-2.2.6-x86_64-4.txz -rw-r--r-- 1 root root 197 2009-05-23 04:43 ./slackware64/l/libnjb-2.2.6-x86_64-4.txz.asc -rw-r--r-- 1 root root 330 2009-03-31 10:18 ./slackware64/l/libnl-1.1-x86_64-1.txt -rw-r--r-- 1 root root 119472 2009-03-31 10:18 ./slackware64/l/libnl-1.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-03-31 10:18 ./slackware64/l/libnl-1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 305 2008-10-09 14:04 ./slackware64/l/libogg-1.1.3-x86_64-2.txt --rw-r--r-- 1 root root 57256 2008-10-09 14:04 ./slackware64/l/libogg-1.1.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-09 14:04 ./slackware64/l/libogg-1.1.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 251 2010-02-12 19:52 ./slackware64/l/libnotify-0.4.5-x86_64-2.txt +-rw-r--r-- 1 root root 42680 2010-02-12 19:52 ./slackware64/l/libnotify-0.4.5-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-12 19:52 ./slackware64/l/libnotify-0.4.5-x86_64-2.txz.asc +-rw-r--r-- 1 root root 305 2010-02-06 21:41 ./slackware64/l/libogg-1.1.4-x86_64-1.txt +-rw-r--r-- 1 root root 66736 2010-02-06 21:41 ./slackware64/l/libogg-1.1.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-06 21:41 ./slackware64/l/libogg-1.1.4-x86_64-1.txz.asc -rw-r--r-- 1 root root 576 2009-06-02 22:11 ./slackware64/l/liboil-0.3.16-x86_64-1.txt -rw-r--r-- 1 root root 159048 2009-06-02 22:11 ./slackware64/l/liboil-0.3.16-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-02 22:11 ./slackware64/l/liboil-0.3.16-x86_64-1.txz.asc --rw-r--r-- 1 root root 492 2009-06-19 21:52 ./slackware64/l/libpng-1.2.37-x86_64-1.txt --rw-r--r-- 1 root root 316160 2009-06-19 21:52 ./slackware64/l/libpng-1.2.37-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-19 21:52 ./slackware64/l/libpng-1.2.37-x86_64-1.txz.asc --rw-r--r-- 1 root root 330 2008-10-09 14:56 ./slackware64/l/libraw1394-2.0.0-x86_64-1.txt --rw-r--r-- 1 root root 51916 2008-10-09 14:56 ./slackware64/l/libraw1394-2.0.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-09 14:56 ./slackware64/l/libraw1394-2.0.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 174 2009-06-09 00:47 ./slackware64/l/librsvg-2.26.0-x86_64-2.txt --rw-r--r-- 1 root root 134920 2009-06-09 00:47 ./slackware64/l/librsvg-2.26.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 00:47 ./slackware64/l/librsvg-2.26.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 413 2009-04-03 19:37 ./slackware64/l/libspectre-0.2.2-x86_64-1.txt --rw-r--r-- 1 root root 36788 2009-04-03 19:37 ./slackware64/l/libspectre-0.2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-03 19:37 ./slackware64/l/libspectre-0.2.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 492 2010-05-08 03:25 ./slackware64/l/libpng-1.4.2-x86_64-1.txt +-rw-r--r-- 1 root root 530920 2010-05-08 03:25 ./slackware64/l/libpng-1.4.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-08 03:25 ./slackware64/l/libpng-1.4.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 351 2010-05-11 01:18 ./slackware64/l/libraw1394-2.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 63360 2010-05-11 01:18 ./slackware64/l/libraw1394-2.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-11 01:18 ./slackware64/l/libraw1394-2.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 174 2010-02-12 21:37 ./slackware64/l/librsvg-2.26.0-x86_64-3.txt +-rw-r--r-- 1 root root 142780 2010-02-12 21:37 ./slackware64/l/librsvg-2.26.0-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-12 21:37 ./slackware64/l/librsvg-2.26.0-x86_64-3.txz.asc +-rw-r--r-- 1 root root 653 2009-12-17 01:35 ./slackware64/l/libsamplerate-0.1.7-x86_64-1.txt +-rw-r--r-- 1 root root 988712 2009-12-17 01:35 ./slackware64/l/libsamplerate-0.1.7-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-17 01:35 ./slackware64/l/libsamplerate-0.1.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 413 2010-05-04 01:05 ./slackware64/l/libspectre-0.2.5-x86_64-1.txt +-rw-r--r-- 1 root root 38076 2010-05-04 01:05 ./slackware64/l/libspectre-0.2.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:05 ./slackware64/l/libspectre-0.2.5-x86_64-1.txz.asc -rw-r--r-- 1 root root 477 2008-09-28 22:17 ./slackware64/l/libtermcap-1.2.3-x86_64-7.txt -rw-r--r-- 1 root root 59224 2008-09-28 22:17 ./slackware64/l/libtermcap-1.2.3-x86_64-7.txz -rw-r--r-- 1 root root 197 2008-09-28 22:17 ./slackware64/l/libtermcap-1.2.3-x86_64-7.txz.asc --rw-r--r-- 1 root root 625 2009-04-07 17:26 ./slackware64/l/libtheora-1.0-x86_64-1.txt --rw-r--r-- 1 root root 153448 2009-04-07 17:26 ./slackware64/l/libtheora-1.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-07 17:26 ./slackware64/l/libtheora-1.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 394 2008-09-23 22:07 ./slackware64/l/libtiff-3.8.2-x86_64-3.txt --rw-r--r-- 1 root root 385396 2008-09-23 22:07 ./slackware64/l/libtiff-3.8.2-x86_64-3.txz --rw-r--r-- 1 root root 197 2008-09-23 22:07 ./slackware64/l/libtiff-3.8.2-x86_64-3.txz.asc --rw-r--r-- 1 root root 344 2008-10-09 15:34 ./slackware64/l/libungif-4.1.4-x86_64-4.txt --rw-r--r-- 1 root root 168452 2008-10-09 15:34 ./slackware64/l/libungif-4.1.4-x86_64-4.txz --rw-r--r-- 1 root root 197 2008-10-09 15:34 ./slackware64/l/libungif-4.1.4-x86_64-4.txz.asc --rw-r--r-- 1 root root 246 2008-10-01 21:17 ./slackware64/l/libusb-0.1.12-x86_64-2.txt --rw-r--r-- 1 root root 91620 2008-10-01 21:17 ./slackware64/l/libusb-0.1.12-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-01 21:17 ./slackware64/l/libusb-0.1.12-x86_64-2.txz.asc +-rw-r--r-- 1 root root 625 2010-02-17 23:33 ./slackware64/l/libtheora-1.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 183020 2010-02-17 23:33 ./slackware64/l/libtheora-1.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-17 23:33 ./slackware64/l/libtheora-1.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 394 2010-02-19 19:46 ./slackware64/l/libtiff-3.9.2-x86_64-1.txt +-rw-r--r-- 1 root root 467312 2010-02-19 19:46 ./slackware64/l/libtiff-3.9.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-19 19:46 ./slackware64/l/libtiff-3.9.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 387 2010-02-06 21:52 ./slackware64/l/libusb-1.0.6-x86_64-1.txt +-rw-r--r-- 1 root root 64240 2010-02-06 21:52 ./slackware64/l/libusb-1.0.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-06 21:52 ./slackware64/l/libusb-1.0.6-x86_64-1.txz.asc -rw-r--r-- 1 root root 544 2008-10-10 08:57 ./slackware64/l/libvisual-0.4.0-x86_64-2.txt -rw-r--r-- 1 root root 127060 2008-10-10 08:57 ./slackware64/l/libvisual-0.4.0-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-10 08:57 ./slackware64/l/libvisual-0.4.0-x86_64-2.txz.asc -rw-r--r-- 1 root root 722 2009-06-10 01:25 ./slackware64/l/libvisual-plugins-0.4.0-x86_64-2.txt -rw-r--r-- 1 root root 220752 2009-06-10 01:25 ./slackware64/l/libvisual-plugins-0.4.0-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-06-10 01:25 ./slackware64/l/libvisual-plugins-0.4.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 374 2009-04-03 18:56 ./slackware64/l/libvncserver-0.9.7-x86_64-1.txt --rw-r--r-- 1 root root 187868 2009-04-03 18:56 ./slackware64/l/libvncserver-0.9.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-03 18:56 ./slackware64/l/libvncserver-0.9.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 560 2008-10-09 14:05 ./slackware64/l/libvorbis-1.2.0-x86_64-1.txt --rw-r--r-- 1 root root 401704 2008-10-09 14:05 ./slackware64/l/libvorbis-1.2.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-09 14:05 ./slackware64/l/libvorbis-1.2.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 288 2009-06-09 02:26 ./slackware64/l/libwmf-0.2.8.4-x86_64-4.txt --rw-r--r-- 1 root root 749260 2009-06-09 02:26 ./slackware64/l/libwmf-0.2.8.4-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-09 02:26 ./slackware64/l/libwmf-0.2.8.4-x86_64-4.txz.asc --rw-r--r-- 1 root root 305 2009-06-09 02:26 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-4.txt --rw-r--r-- 1 root root 206948 2009-06-09 02:26 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-4.txz --rw-r--r-- 1 root root 197 2009-06-09 02:26 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-4.txz.asc --rw-r--r-- 1 root root 475 2009-06-09 02:17 ./slackware64/l/libwnck-2.26.1-x86_64-1.txt --rw-r--r-- 1 root root 324120 2009-06-09 02:17 ./slackware64/l/libwnck-2.26.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 02:17 ./slackware64/l/libwnck-2.26.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-15 01:27 ./slackware64/l/libvncserver-0.9.7-x86_64-2.txt +-rw-r--r-- 1 root root 198772 2010-02-15 01:27 ./slackware64/l/libvncserver-0.9.7-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-15 01:27 ./slackware64/l/libvncserver-0.9.7-x86_64-2.txz.asc +-rw-r--r-- 1 root root 560 2010-02-06 03:12 ./slackware64/l/libvorbis-1.2.3-x86_64-1.txt +-rw-r--r-- 1 root root 275416 2010-02-06 03:12 ./slackware64/l/libvorbis-1.2.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-06 03:12 ./slackware64/l/libvorbis-1.2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 288 2010-02-15 00:25 ./slackware64/l/libwmf-0.2.8.4-x86_64-5.txt +-rw-r--r-- 1 root root 752556 2010-02-15 00:25 ./slackware64/l/libwmf-0.2.8.4-x86_64-5.txz +-rw-r--r-- 1 root root 197 2010-02-15 00:25 ./slackware64/l/libwmf-0.2.8.4-x86_64-5.txz.asc +-rw-r--r-- 1 root root 305 2010-02-15 00:25 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-5.txt +-rw-r--r-- 1 root root 207316 2010-02-15 00:25 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-5.txz +-rw-r--r-- 1 root root 197 2010-02-15 00:25 ./slackware64/l/libwmf-docs-0.2.8.4-noarch-5.txz.asc +-rw-r--r-- 1 root root 475 2010-02-12 08:17 ./slackware64/l/libwnck-2.28.0-x86_64-1.txt +-rw-r--r-- 1 root root 339736 2010-02-12 08:17 ./slackware64/l/libwnck-2.28.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-12 08:17 ./slackware64/l/libwnck-2.28.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 316 2008-10-20 20:14 ./slackware64/l/libwpd-0.8.14-x86_64-1.txt -rw-r--r-- 1 root root 198748 2008-10-20 20:14 ./slackware64/l/libwpd-0.8.14-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-20 20:14 ./slackware64/l/libwpd-0.8.14-x86_64-1.txz.asc --rw-r--r-- 1 root root 292 2009-06-09 02:19 ./slackware64/l/libxklavier-3.9-x86_64-2.txt --rw-r--r-- 1 root root 72804 2009-06-09 02:19 ./slackware64/l/libxklavier-3.9-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 02:19 ./slackware64/l/libxklavier-3.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 522 2009-05-18 08:17 ./slackware64/l/libxml2-2.7.3-x86_64-3.txt --rw-r--r-- 1 root root 1381656 2009-05-18 08:17 ./slackware64/l/libxml2-2.7.3-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-05-18 08:17 ./slackware64/l/libxml2-2.7.3-x86_64-3.txz.asc --rw-r--r-- 1 root root 220 2009-04-30 21:17 ./slackware64/l/libxslt-1.1.24-x86_64-2.txt --rw-r--r-- 1 root root 398616 2009-04-30 21:17 ./slackware64/l/libxslt-1.1.24-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-30 21:17 ./slackware64/l/libxslt-1.1.24-x86_64-2.txz.asc +-rw-r--r-- 1 root root 292 2010-02-12 00:23 ./slackware64/l/libxklavier-5.0-x86_64-1.txt +-rw-r--r-- 1 root root 76000 2010-02-12 00:23 ./slackware64/l/libxklavier-5.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-12 00:23 ./slackware64/l/libxklavier-5.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 522 2009-12-05 22:11 ./slackware64/l/libxml2-2.7.6-x86_64-1.txt +-rw-r--r-- 1 root root 1390800 2009-12-05 22:11 ./slackware64/l/libxml2-2.7.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-05 22:11 ./slackware64/l/libxml2-2.7.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 220 2009-12-05 22:16 ./slackware64/l/libxslt-1.1.26-x86_64-1.txt +-rw-r--r-- 1 root root 408116 2009-12-05 22:16 ./slackware64/l/libxslt-1.1.26-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-05 22:16 ./slackware64/l/libxslt-1.1.26-x86_64-1.txz.asc -rw-r--r-- 1 root root 429 2009-08-16 22:11 ./slackware64/l/libzip-0.9-x86_64-2.txt -rw-r--r-- 1 root root 89568 2009-08-16 22:11 ./slackware64/l/libzip-0.9-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-08-16 22:11 ./slackware64/l/libzip-0.9-x86_64-2.txz.asc +-rw-r--r-- 1 root root 440 2010-04-10 20:56 ./slackware64/l/loudmouth-1.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 76796 2010-04-10 20:56 ./slackware64/l/loudmouth-1.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 20:56 ./slackware64/l/loudmouth-1.4.3-x86_64-1.txz.asc -rw-r--r-- 1 root root 273 2008-10-10 09:38 ./slackware64/l/lzo-2.02-x86_64-1.txt -rw-r--r-- 1 root root 70632 2008-10-10 09:38 ./slackware64/l/lzo-2.02-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-10 09:38 ./slackware64/l/lzo-2.02-x86_64-1.txz.asc --rw-r--r-- 1 root root 12155 2009-07-01 18:29 ./slackware64/l/maketag --rw-r--r-- 1 root root 12155 2009-07-01 18:29 ./slackware64/l/maketag.ez +-rw-r--r-- 1 root root 13664 2010-05-14 04:09 ./slackware64/l/maketag +-rw-r--r-- 1 root root 13664 2010-05-14 04:09 ./slackware64/l/maketag.ez -rw-r--r-- 1 root root 468 2008-10-10 09:43 ./slackware64/l/mhash-0.9.9-x86_64-1.txt -rw-r--r-- 1 root root 112176 2008-10-10 09:43 ./slackware64/l/mhash-0.9.9-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-10 09:43 ./slackware64/l/mhash-0.9.9-x86_64-1.txz.asc -rw-r--r-- 1 root root 550 2008-10-10 09:58 ./slackware64/l/mm-1.4.2-x86_64-2.txt -rw-r--r-- 1 root root 32612 2008-10-10 09:58 ./slackware64/l/mm-1.4.2-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-10 09:58 ./slackware64/l/mm-1.4.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 587 2008-10-10 10:18 ./slackware64/l/mpfr-2.3.1-x86_64-1.txt --rw-r--r-- 1 root root 231972 2008-10-10 10:18 ./slackware64/l/mpfr-2.3.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-10 10:18 ./slackware64/l/mpfr-2.3.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 587 2010-02-24 02:36 ./slackware64/l/mpfr-2.4.2p03-x86_64-1.txt +-rw-r--r-- 1 root root 267756 2010-02-24 02:36 ./slackware64/l/mpfr-2.4.2p03-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-24 02:36 ./slackware64/l/mpfr-2.4.2p03-x86_64-1.txz.asc -rw-r--r-- 1 root root 446 2009-05-23 03:58 ./slackware64/l/ncurses-5.7-x86_64-2.txt -rw-r--r-- 1 root root 1152080 2009-05-23 03:58 ./slackware64/l/ncurses-5.7-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 03:58 ./slackware64/l/ncurses-5.7-x86_64-2.txz.asc --rw-r--r-- 1 root root 343 2009-06-13 02:29 ./slackware64/l/neon-0.28.4-x86_64-1.txt --rw-r--r-- 1 root root 213476 2009-06-13 02:29 ./slackware64/l/neon-0.28.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-13 02:29 ./slackware64/l/neon-0.28.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 231 2008-12-15 00:06 ./slackware64/l/netpbm-10.35.22-x86_64-1.txt --rw-r--r-- 1 root root 1513060 2008-12-15 00:06 ./slackware64/l/netpbm-10.35.22-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-15 00:06 ./slackware64/l/netpbm-10.35.22-x86_64-1.txz.asc +-rw-r--r-- 1 root root 343 2009-12-05 22:17 ./slackware64/l/neon-0.29.0-x86_64-1.txt +-rw-r--r-- 1 root root 192576 2009-12-05 22:17 ./slackware64/l/neon-0.29.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-05 22:17 ./slackware64/l/neon-0.29.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 231 2010-02-15 01:22 ./slackware64/l/netpbm-10.49.02-x86_64-1.txt +-rw-r--r-- 1 root root 1629468 2010-02-15 01:22 ./slackware64/l/netpbm-10.49.02-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-15 01:22 ./slackware64/l/netpbm-10.49.02-x86_64-1.txz.asc +-rw-r--r-- 1 root root 354 2010-02-20 18:25 ./slackware64/l/notify-python-0.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 18960 2010-02-20 18:25 ./slackware64/l/notify-python-0.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-20 18:25 ./slackware64/l/notify-python-0.1.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 457 2009-05-23 06:03 ./slackware64/l/openexr-1.6.1-x86_64-2.txt -rw-r--r-- 1 root root 2948284 2009-05-23 06:03 ./slackware64/l/openexr-1.6.1-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 06:03 ./slackware64/l/openexr-1.6.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 429 2009-06-11 17:13 ./slackware64/l/pango-1.22.4-x86_64-4.txt --rw-r--r-- 1 root root 480168 2009-06-11 17:13 ./slackware64/l/pango-1.22.4-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-11 17:13 ./slackware64/l/pango-1.22.4-x86_64-4.txz.asc --rw-r--r-- 1 root root 384 2008-10-07 17:42 ./slackware64/l/parted-1.8.8-x86_64-2.txt --rw-r--r-- 1 root root 395636 2008-10-07 17:42 ./slackware64/l/parted-1.8.8-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-07 17:42 ./slackware64/l/parted-1.8.8-x86_64-2.txz.asc --rw-r--r-- 1 root root 364 2008-10-10 11:27 ./slackware64/l/pcre-7.7-x86_64-1.txt --rw-r--r-- 1 root root 355980 2008-10-10 11:27 ./slackware64/l/pcre-7.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-10 11:27 ./slackware64/l/pcre-7.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 172 2009-02-28 23:50 ./slackware64/l/phonon-4.3.1-x86_64-1.txt --rw-r--r-- 1 root root 284324 2009-02-28 23:50 ./slackware64/l/phonon-4.3.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-02-28 23:50 ./slackware64/l/phonon-4.3.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 419 2009-04-30 20:45 ./slackware64/l/pil-1.1.6-x86_64-1.txt --rw-r--r-- 1 root root 341512 2009-04-30 20:45 ./slackware64/l/pil-1.1.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-30 20:45 ./slackware64/l/pil-1.1.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 416 2009-05-23 07:21 ./slackware64/l/pilot-link-0.12.3-x86_64-9.txt --rw-r--r-- 1 root root 537704 2009-05-23 07:21 ./slackware64/l/pilot-link-0.12.3-x86_64-9.txz --rw-r--r-- 1 root root 197 2009-05-23 07:21 ./slackware64/l/pilot-link-0.12.3-x86_64-9.txz.asc --rw-r--r-- 1 root root 494 2009-06-09 04:02 ./slackware64/l/poppler-0.10.7-x86_64-1.txt --rw-r--r-- 1 root root 882696 2009-06-09 04:02 ./slackware64/l/poppler-0.10.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 04:02 ./slackware64/l/poppler-0.10.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 601 2009-03-05 01:26 ./slackware64/l/poppler-data-0.2.1-noarch-1.txt --rw-r--r-- 1 root root 1456256 2009-03-05 01:26 ./slackware64/l/poppler-data-0.2.1-noarch-1.txz --rw-r--r-- 1 root root 197 2009-03-05 01:26 ./slackware64/l/poppler-data-0.2.1-noarch-1.txz.asc --rw-r--r-- 1 root root 592 2008-09-28 20:21 ./slackware64/l/popt-1.7-x86_64-2.txt --rw-r--r-- 1 root root 40680 2008-09-28 20:21 ./slackware64/l/popt-1.7-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-09-28 20:21 ./slackware64/l/popt-1.7-x86_64-2.txz.asc --rw-r--r-- 1 root root 286 2009-06-11 16:58 ./slackware64/l/pycairo-1.8.4-x86_64-3.txt --rw-r--r-- 1 root root 61264 2009-06-11 16:58 ./slackware64/l/pycairo-1.8.4-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-11 16:58 ./slackware64/l/pycairo-1.8.4-x86_64-3.txz.asc --rw-r--r-- 1 root root 239 2009-04-30 20:18 ./slackware64/l/pycups-1.9.45-x86_64-2.txt --rw-r--r-- 1 root root 44540 2009-04-30 20:18 ./slackware64/l/pycups-1.9.45-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-30 20:18 ./slackware64/l/pycups-1.9.45-x86_64-2.txz.asc --rw-r--r-- 1 root root 398 2009-04-30 20:11 ./slackware64/l/pygobject-2.16.1-x86_64-1.txt --rw-r--r-- 1 root root 290264 2009-04-30 20:11 ./slackware64/l/pygobject-2.16.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-30 20:11 ./slackware64/l/pygobject-2.16.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 320 2009-06-09 04:08 ./slackware64/l/pygtk-2.14.1-x86_64-2.txt --rw-r--r-- 1 root root 1622568 2009-06-09 04:08 ./slackware64/l/pygtk-2.14.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 04:08 ./slackware64/l/pygtk-2.14.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 429 2010-02-12 07:15 ./slackware64/l/pango-1.26.2-x86_64-1.txt +-rw-r--r-- 1 root root 493356 2010-02-12 07:15 ./slackware64/l/pango-1.26.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-12 07:15 ./slackware64/l/pango-1.26.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 384 2010-03-13 00:56 ./slackware64/l/parted-2.2-x86_64-1.txt +-rw-r--r-- 1 root root 508568 2010-03-13 00:56 ./slackware64/l/parted-2.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-13 00:56 ./slackware64/l/parted-2.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 364 2010-05-08 03:22 ./slackware64/l/pcre-8.02-x86_64-1.txt +-rw-r--r-- 1 root root 401796 2010-05-08 03:22 ./slackware64/l/pcre-8.02-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-08 03:22 ./slackware64/l/pcre-8.02-x86_64-1.txz.asc +-rw-r--r-- 1 root root 304 2010-05-04 01:22 ./slackware64/l/phonon-4.4.1-x86_64-1.txt +-rw-r--r-- 1 root root 345140 2010-05-04 01:22 ./slackware64/l/phonon-4.4.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:22 ./slackware64/l/phonon-4.4.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 419 2010-02-14 23:52 ./slackware64/l/pil-1.1.7-x86_64-1.txt +-rw-r--r-- 1 root root 365828 2010-02-14 23:52 ./slackware64/l/pil-1.1.7-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-14 23:52 ./slackware64/l/pil-1.1.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 416 2010-05-02 08:12 ./slackware64/l/pilot-link-0.12.5-x86_64-1.txt +-rw-r--r-- 1 root root 552880 2010-05-02 08:12 ./slackware64/l/pilot-link-0.12.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-02 08:12 ./slackware64/l/pilot-link-0.12.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 450 2010-05-04 01:06 ./slackware64/l/polkit-1_14bdfd8-x86_64-1.txt +-rw-r--r-- 1 root root 391808 2010-05-04 01:06 ./slackware64/l/polkit-1_14bdfd8-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:06 ./slackware64/l/polkit-1_14bdfd8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 367 2010-05-08 05:27 ./slackware64/l/polkit-gnome-0.96-x86_64-1.txt +-rw-r--r-- 1 root root 85816 2010-05-08 05:27 ./slackware64/l/polkit-gnome-0.96-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-08 05:27 ./slackware64/l/polkit-gnome-0.96-x86_64-1.txz.asc +-rw-r--r-- 1 root root 494 2010-02-18 22:46 ./slackware64/l/poppler-0.12.4-x86_64-1.txt +-rw-r--r-- 1 root root 946936 2010-02-18 22:46 ./slackware64/l/poppler-0.12.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-18 22:46 ./slackware64/l/poppler-0.12.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 601 2010-02-19 05:29 ./slackware64/l/poppler-data-0.4.0-noarch-1.txt +-rw-r--r-- 1 root root 1492848 2010-02-19 05:29 ./slackware64/l/poppler-data-0.4.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-19 05:29 ./slackware64/l/poppler-data-0.4.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 592 2010-04-30 02:44 ./slackware64/l/popt-1.7-x86_64-3.txt +-rw-r--r-- 1 root root 41380 2010-04-30 02:44 ./slackware64/l/popt-1.7-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-04-30 02:44 ./slackware64/l/popt-1.7-x86_64-3.txz.asc +-rw-r--r-- 1 root root 286 2010-02-16 05:05 ./slackware64/l/pycairo-1.8.8-x86_64-1.txt +-rw-r--r-- 1 root root 44292 2010-02-16 05:05 ./slackware64/l/pycairo-1.8.8-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-16 05:05 ./slackware64/l/pycairo-1.8.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 239 2010-02-17 20:51 ./slackware64/l/pycups-1.9.48-x86_64-1.txt +-rw-r--r-- 1 root root 55492 2010-02-17 20:51 ./slackware64/l/pycups-1.9.48-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-17 20:51 ./slackware64/l/pycups-1.9.48-x86_64-1.txz.asc +-rw-r--r-- 1 root root 398 2010-02-07 01:45 ./slackware64/l/pygobject-2.20.0-x86_64-1.txt +-rw-r--r-- 1 root root 369704 2010-02-07 01:45 ./slackware64/l/pygobject-2.20.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-07 01:45 ./slackware64/l/pygobject-2.20.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 320 2010-02-23 19:48 ./slackware64/l/pygtk-2.16.0-x86_64-1.txt +-rw-r--r-- 1 root root 1659324 2010-02-23 19:48 ./slackware64/l/pygtk-2.16.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-23 19:48 ./slackware64/l/pygtk-2.16.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 392 2009-04-30 21:22 ./slackware64/l/pyrex-0.9.8.5-x86_64-2.txt -rw-r--r-- 1 root root 234088 2009-04-30 21:22 ./slackware64/l/pyrex-0.9.8.5-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-04-30 21:22 ./slackware64/l/pyrex-0.9.8.5-x86_64-2.txz.asc --rw-r--r-- 1 root root 567 2008-12-16 15:22 ./slackware64/l/qca-2.0.1-x86_64-1.txt --rw-r--r-- 1 root root 539204 2008-12-16 15:22 ./slackware64/l/qca-2.0.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-16 15:22 ./slackware64/l/qca-2.0.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 567 2009-11-03 22:37 ./slackware64/l/qca-2.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 543344 2009-11-03 22:37 ./slackware64/l/qca-2.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-11-03 22:37 ./slackware64/l/qca-2.0.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 280 2008-12-16 15:26 ./slackware64/l/qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txt -rw-r--r-- 1 root root 25916 2008-12-16 15:26 ./slackware64/l/qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-12-16 15:26 ./slackware64/l/qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txz.asc @@ -2109,110 +2182,119 @@ drwxr-xr-x 2 root root 40960 2009-08-25 04:55 ./slackware64/l -rw-r--r-- 1 root root 395 2009-04-03 19:40 ./slackware64/l/qimageblitz-r948358-x86_64-1.txt -rw-r--r-- 1 root root 70036 2009-04-03 19:40 ./slackware64/l/qimageblitz-r948358-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-04-03 19:40 ./slackware64/l/qimageblitz-r948358-x86_64-1.txz.asc --rw-r--r-- 1 root root 235 2009-08-08 20:27 ./slackware64/l/qt-r1008952-x86_64-1.txt --rw-r--r-- 1 root root 41978140 2009-08-08 20:27 ./slackware64/l/qt-r1008952-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-08 20:27 ./slackware64/l/qt-r1008952-x86_64-1.txz.asc --rw-r--r-- 1 root root 488 2009-06-05 14:59 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-1.txt --rw-r--r-- 1 root root 3644212 2009-06-05 14:59 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-05 14:59 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 545 2008-12-16 10:53 ./slackware64/l/raptor-1.4.18-x86_64-1.txt --rw-r--r-- 1 root root 394868 2008-12-16 10:53 ./slackware64/l/raptor-1.4.18-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-16 10:53 ./slackware64/l/raptor-1.4.18-x86_64-1.txz.asc --rw-r--r-- 1 root root 428 2008-12-16 11:25 ./slackware64/l/rasqal-0.9.16-x86_64-1.txt --rw-r--r-- 1 root root 173012 2008-12-16 11:25 ./slackware64/l/rasqal-0.9.16-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-16 11:25 ./slackware64/l/rasqal-0.9.16-x86_64-1.txz.asc +-rw-r--r-- 1 root root 266 2010-05-04 01:40 ./slackware64/l/qt-4.6.2_2d3d3e5-x86_64-1.txt +-rw-r--r-- 1 root root 50348364 2010-05-04 01:40 ./slackware64/l/qt-4.6.2_2d3d3e5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:40 ./slackware64/l/qt-4.6.2_2d3d3e5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 488 2010-02-19 01:59 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-2.txt +-rw-r--r-- 1 root root 3635940 2010-02-19 01:59 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-19 01:59 ./slackware64/l/qtscriptgenerator-0.1.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 545 2010-03-05 21:45 ./slackware64/l/raptor-1.4.21-x86_64-1.txt +-rw-r--r-- 1 root root 319968 2010-03-05 21:45 ./slackware64/l/raptor-1.4.21-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-05 21:45 ./slackware64/l/raptor-1.4.21-x86_64-1.txz.asc +-rw-r--r-- 1 root root 428 2010-05-04 01:40 ./slackware64/l/rasqal-0.9.19-x86_64-1.txt +-rw-r--r-- 1 root root 218312 2010-05-04 01:40 ./slackware64/l/rasqal-0.9.19-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:40 ./slackware64/l/rasqal-0.9.19-x86_64-1.txz.asc -rw-r--r-- 1 root root 559 2009-02-22 15:40 ./slackware64/l/readline-5.2-x86_64-4.txt -rw-r--r-- 1 root root 280136 2009-02-22 15:40 ./slackware64/l/readline-5.2-x86_64-4.txz -rw-r--r-- 1 root root 197 2009-02-22 15:40 ./slackware64/l/readline-5.2-x86_64-4.txz.asc --rw-r--r-- 1 root root 528 2008-12-16 11:31 ./slackware64/l/redland-1.0.8-x86_64-1.txt --rw-r--r-- 1 root root 235308 2008-12-16 11:31 ./slackware64/l/redland-1.0.8-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-16 11:31 ./slackware64/l/redland-1.0.8-x86_64-1.txz.asc --rw-r--r-- 1 root root 487 2009-06-16 01:50 ./slackware64/l/sdl-1.2.13-x86_64-4.txt --rw-r--r-- 1 root root 594476 2009-06-16 01:50 ./slackware64/l/sdl-1.2.13-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-16 01:50 ./slackware64/l/sdl-1.2.13-x86_64-4.txz.asc --rw-r--r-- 1 root root 782 2009-06-24 19:08 ./slackware64/l/seamonkey-solibs-1.1.17-x86_64-1.txt --rw-r--r-- 1 root root 983996 2009-06-24 19:08 ./slackware64/l/seamonkey-solibs-1.1.17-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-24 19:08 ./slackware64/l/seamonkey-solibs-1.1.17-x86_64-1.txz.asc --rw-r--r-- 1 root root 512 2009-03-09 20:57 ./slackware64/l/shared-mime-info-0.60-x86_64-1.txt --rw-r--r-- 1 root root 276020 2009-03-09 20:57 ./slackware64/l/shared-mime-info-0.60-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-09 20:57 ./slackware64/l/shared-mime-info-0.60-x86_64-1.txz.asc --rw-r--r-- 1 root root 395 2009-04-30 21:20 ./slackware64/l/sip-4.7.9-x86_64-2.txt --rw-r--r-- 1 root root 221548 2009-04-30 21:20 ./slackware64/l/sip-4.7.9-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-30 21:20 ./slackware64/l/sip-4.7.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 538 2009-06-22 02:49 ./slackware64/l/slang-2.1.4-x86_64-1.txt --rw-r--r-- 1 root root 358544 2009-06-22 02:49 ./slackware64/l/slang-2.1.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-22 02:49 ./slackware64/l/slang-2.1.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 528 2010-05-04 01:41 ./slackware64/l/redland-1.0.10-x86_64-1.txt +-rw-r--r-- 1 root root 269104 2010-05-04 01:41 ./slackware64/l/redland-1.0.10-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:41 ./slackware64/l/redland-1.0.10-x86_64-1.txz.asc +-rw-r--r-- 1 root root 487 2010-03-25 21:52 ./slackware64/l/sdl-1.2.14-x86_64-2.txt +-rw-r--r-- 1 root root 663140 2010-03-25 21:52 ./slackware64/l/sdl-1.2.14-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-03-25 21:52 ./slackware64/l/sdl-1.2.14-x86_64-2.txz.asc +-rw-r--r-- 1 root root 782 2010-04-02 20:02 ./slackware64/l/seamonkey-solibs-2.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 1213436 2010-04-02 20:02 ./slackware64/l/seamonkey-solibs-2.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-02 20:02 ./slackware64/l/seamonkey-solibs-2.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 642 2010-05-05 23:33 ./slackware64/l/shared-desktop-ontologies-0.3-x86_64-1.txt +-rw-r--r-- 1 root root 89836 2010-05-05 23:33 ./slackware64/l/shared-desktop-ontologies-0.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 23:33 ./slackware64/l/shared-desktop-ontologies-0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 512 2010-04-30 05:10 ./slackware64/l/shared-mime-info-0.71-x86_64-1.txt +-rw-r--r-- 1 root root 314792 2010-04-30 05:10 ./slackware64/l/shared-mime-info-0.71-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 05:10 ./slackware64/l/shared-mime-info-0.71-x86_64-1.txz.asc +-rw-r--r-- 1 root root 395 2010-05-04 01:41 ./slackware64/l/sip-4.10.2-x86_64-1.txt +-rw-r--r-- 1 root root 314336 2010-05-04 01:41 ./slackware64/l/sip-4.10.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:41 ./slackware64/l/sip-4.10.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 538 2010-02-18 23:07 ./slackware64/l/slang-2.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 393412 2010-02-18 23:07 ./slackware64/l/slang-2.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-18 23:07 ./slackware64/l/slang-2.2.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 549 2008-10-13 21:08 ./slackware64/l/slang1-1.4.9-x86_64-1.txt -rw-r--r-- 1 root root 191920 2008-10-13 21:08 ./slackware64/l/slang1-1.4.9-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-13 21:08 ./slackware64/l/slang1-1.4.9-x86_64-1.txz.asc --rw-r--r-- 1 root root 389 2009-03-29 10:46 ./slackware64/l/soprano-2.2.3-x86_64-1.txt --rw-r--r-- 1 root root 1992288 2009-03-29 10:46 ./slackware64/l/soprano-2.2.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-29 10:46 ./slackware64/l/soprano-2.2.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 359 2009-06-09 02:21 ./slackware64/l/startup-notification-0.9-x86_64-2.txt --rw-r--r-- 1 root root 36124 2009-06-09 02:21 ./slackware64/l/startup-notification-0.9-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 02:21 ./slackware64/l/startup-notification-0.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 509 2009-04-03 19:30 ./slackware64/l/strigi-0.6.4-x86_64-1.txt --rw-r--r-- 1 root root 608604 2009-04-03 19:30 ./slackware64/l/strigi-0.6.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-03 19:30 ./slackware64/l/strigi-0.6.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 389 2010-05-04 01:42 ./slackware64/l/soprano-2.4.3-x86_64-1.txt +-rw-r--r-- 1 root root 595504 2010-05-04 01:42 ./slackware64/l/soprano-2.4.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:42 ./slackware64/l/soprano-2.4.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 359 2010-02-06 03:36 ./slackware64/l/startup-notification-0.10-x86_64-1.txt +-rw-r--r-- 1 root root 29620 2010-02-06 03:36 ./slackware64/l/startup-notification-0.10-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-06 03:36 ./slackware64/l/startup-notification-0.10-x86_64-1.txz.asc +-rw-r--r-- 1 root root 509 2010-02-08 23:15 ./slackware64/l/strigi-0.7.2-x86_64-1.txt +-rw-r--r-- 1 root root 675980 2010-02-08 23:15 ./slackware64/l/strigi-0.7.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-08 23:15 ./slackware64/l/strigi-0.7.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 344 2009-03-10 11:44 ./slackware64/l/svgalib-1.9.25-x86_64-2.txt -rw-r--r-- 1 root root 596412 2009-03-10 11:44 ./slackware64/l/svgalib-1.9.25-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-03-10 11:44 ./slackware64/l/svgalib-1.9.25-x86_64-2.txz.asc +-rw-r--r-- 1 root root 745 2010-05-18 20:25 ./slackware64/l/system-config-printer-1.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 572004 2010-05-18 20:25 ./slackware64/l/system-config-printer-1.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-18 20:25 ./slackware64/l/system-config-printer-1.2.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 357 2009-06-09 00:44 ./slackware64/l/t1lib-5.1.2-x86_64-1.txt -rw-r--r-- 1 root root 932020 2009-06-09 00:44 ./slackware64/l/t1lib-5.1.2-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-09 00:44 ./slackware64/l/t1lib-5.1.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 2094 2009-07-01 18:29 ./slackware64/l/tagfile --rw-r--r-- 1 root root 340 2008-10-09 14:09 ./slackware64/l/taglib-1.5-x86_64-1.txt --rw-r--r-- 1 root root 169972 2008-10-09 14:09 ./slackware64/l/taglib-1.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-09 14:09 ./slackware64/l/taglib-1.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 521 2009-06-05 10:12 ./slackware64/l/taglib-extras-0.1.3-x86_64-1.txt --rw-r--r-- 1 root root 73116 2009-06-05 10:12 ./slackware64/l/taglib-extras-0.1.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-05 10:12 ./slackware64/l/taglib-extras-0.1.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 2394 2010-05-14 04:09 ./slackware64/l/tagfile +-rw-r--r-- 1 root root 340 2010-04-10 19:53 ./slackware64/l/taglib-1.6.2-x86_64-1.txt +-rw-r--r-- 1 root root 234272 2010-04-10 19:53 ./slackware64/l/taglib-1.6.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 19:53 ./slackware64/l/taglib-1.6.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 521 2009-10-03 00:39 ./slackware64/l/taglib-extras-1.0.1-x86_64-1.txt +-rw-r--r-- 1 root root 28432 2009-10-03 00:39 ./slackware64/l/taglib-extras-1.0.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-10-03 00:39 ./slackware64/l/taglib-extras-1.0.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 523 2009-03-06 09:44 ./slackware64/l/tango-icon-theme-0.8.90-noarch-1.txt -rw-r--r-- 1 root root 1245240 2009-03-06 09:44 ./slackware64/l/tango-icon-theme-0.8.90-noarch-1.txz -rw-r--r-- 1 root root 197 2009-03-06 09:44 ./slackware64/l/tango-icon-theme-0.8.90-noarch-1.txz.asc -rw-r--r-- 1 root root 541 2008-10-23 08:28 ./slackware64/l/tango-icon-theme-extras-0.1.0-noarch-1.txt -rw-r--r-- 1 root root 55540 2008-10-23 08:28 ./slackware64/l/tango-icon-theme-extras-0.1.0-noarch-1.txz -rw-r--r-- 1 root root 197 2008-10-23 08:28 ./slackware64/l/tango-icon-theme-extras-0.1.0-noarch-1.txz.asc --rw-r--r-- 1 root root 386 2009-07-01 18:23 ./slackware64/l/urwid-0.9.8.4-x86_64-1.txt --rw-r--r-- 1 root root 193868 2009-07-01 18:23 ./slackware64/l/urwid-0.9.8.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-01 18:23 ./slackware64/l/urwid-0.9.8.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 256 2009-06-11 18:08 ./slackware64/l/vte-0.20.5-x86_64-1.txt --rw-r--r-- 1 root root 318296 2009-06-11 18:08 ./slackware64/l/vte-0.20.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-11 18:08 ./slackware64/l/vte-0.20.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 386 2010-01-27 20:40 ./slackware64/l/urwid-0.9.9.1-x86_64-1.txt +-rw-r--r-- 1 root root 251080 2010-01-27 20:40 ./slackware64/l/urwid-0.9.9.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-01-27 20:40 ./slackware64/l/urwid-0.9.9.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 571 2010-05-14 03:56 ./slackware64/l/v4l-utils-0.8.0-x86_64-1.txt +-rw-r--r-- 1 root root 212436 2010-05-14 03:56 ./slackware64/l/v4l-utils-0.8.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-14 03:56 ./slackware64/l/v4l-utils-0.8.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 427 2010-05-04 01:44 ./slackware64/l/virtuoso-ose-6.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 6960216 2010-05-04 01:44 ./slackware64/l/virtuoso-ose-6.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 01:44 ./slackware64/l/virtuoso-ose-6.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 256 2010-04-30 04:20 ./slackware64/l/vte-0.24.1-x86_64-1.txt +-rw-r--r-- 1 root root 374572 2010-04-30 04:20 ./slackware64/l/vte-0.24.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 04:20 ./slackware64/l/vte-0.24.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 381 2008-10-13 21:17 ./slackware64/l/wavpack-4.41.0-x86_64-1.txt -rw-r--r-- 1 root root 100568 2008-10-13 21:17 ./slackware64/l/wavpack-4.41.0-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-13 21:17 ./slackware64/l/wavpack-4.41.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 422 2008-10-20 20:16 ./slackware64/l/wv2-0.2.3-x86_64-1.txt --rw-r--r-- 1 root root 227912 2008-10-20 20:16 ./slackware64/l/wv2-0.2.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-20 20:16 ./slackware64/l/wv2-0.2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 422 2009-12-17 02:12 ./slackware64/l/wv2-0.4.2-x86_64-1.txt +-rw-r--r-- 1 root root 263140 2009-12-17 02:12 ./slackware64/l/wv2-0.4.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-17 02:12 ./slackware64/l/wv2-0.4.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 359 2008-09-21 08:11 ./slackware64/l/zlib-1.2.3-x86_64-2.txt -rw-r--r-- 1 root root 83180 2008-09-21 08:11 ./slackware64/l/zlib-1.2.3-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-09-21 08:11 ./slackware64/l/zlib-1.2.3-x86_64-2.txz.asc -drwxr-xr-x 2 root root 28672 2009-08-25 04:55 ./slackware64/n --rw-r--r-- 1 root root 645 2009-05-23 04:11 ./slackware64/n/alpine-2.00-x86_64-2.txt --rw-r--r-- 1 root root 1929600 2009-05-23 04:11 ./slackware64/n/alpine-2.00-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:11 ./slackware64/n/alpine-2.00-x86_64-2.txz.asc --rw-r--r-- 1 root root 416 2008-10-23 23:01 ./slackware64/n/autofs-3.1.7-x86_64-1.txt --rw-r--r-- 1 root root 52024 2008-10-23 23:01 ./slackware64/n/autofs-3.1.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-23 23:01 ./slackware64/n/autofs-3.1.7-x86_64-1.txz.asc +drwxr-xr-x 2 root root 24576 2010-05-19 03:14 ./slackware64/n +-rw-r--r-- 1 root root 645 2010-03-06 03:08 ./slackware64/n/alpine-2.00-x86_64-3.txt +-rw-r--r-- 1 root root 1937736 2010-03-06 03:08 ./slackware64/n/alpine-2.00-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-03-06 03:08 ./slackware64/n/alpine-2.00-x86_64-3.txz.asc +-rw-r--r-- 1 root root 416 2010-03-05 23:03 ./slackware64/n/autofs-5.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 304952 2010-03-05 23:03 ./slackware64/n/autofs-5.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-05 23:03 ./slackware64/n/autofs-5.0.5-x86_64-1.txz.asc -rw-r--r-- 1 root root 686 2008-10-23 23:09 ./slackware64/n/biff+comsat-0.17-x86_64-1.txt -rw-r--r-- 1 root root 10972 2008-10-23 23:09 ./slackware64/n/biff+comsat-0.17-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-23 23:09 ./slackware64/n/biff+comsat-0.17-x86_64-1.txz.asc --rw-r--r-- 1 root root 336 2009-07-29 22:13 ./slackware64/n/bind-9.4.3_P3-x86_64-1.txt --rw-r--r-- 1 root root 1679332 2009-07-29 22:13 ./slackware64/n/bind-9.4.3_P3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-29 22:13 ./slackware64/n/bind-9.4.3_P3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 336 2009-11-27 20:56 ./slackware64/n/bind-9.4.3_P4-x86_64-1.txt +-rw-r--r-- 1 root root 1679348 2009-11-27 20:56 ./slackware64/n/bind-9.4.3_P4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-11-27 20:56 ./slackware64/n/bind-9.4.3_P4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 347 2010-05-02 08:11 ./slackware64/n/bluez-4.64-x86_64-1.txt +-rw-r--r-- 1 root root 452308 2010-05-02 08:11 ./slackware64/n/bluez-4.64-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-02 08:11 ./slackware64/n/bluez-4.64-x86_64-1.txz.asc -rw-r--r-- 1 root root 367 2008-10-23 23:26 ./slackware64/n/bluez-firmware-1.2-x86_64-1.txt -rw-r--r-- 1 root root 71980 2008-10-23 23:26 ./slackware64/n/bluez-firmware-1.2-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-23 23:26 ./slackware64/n/bluez-firmware-1.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 449 2008-11-26 18:51 ./slackware64/n/bluez-hcidump-1.42-x86_64-2.txt --rw-r--r-- 1 root root 93036 2008-11-26 18:51 ./slackware64/n/bluez-hcidump-1.42-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-11-26 18:51 ./slackware64/n/bluez-hcidump-1.42-x86_64-2.txz.asc --rw-r--r-- 1 root root 338 2008-11-26 18:41 ./slackware64/n/bluez-libs-3.36-x86_64-2.txt --rw-r--r-- 1 root root 63732 2008-11-26 18:41 ./slackware64/n/bluez-libs-3.36-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-11-26 18:41 ./slackware64/n/bluez-libs-3.36-x86_64-2.txz.asc --rw-r--r-- 1 root root 324 2009-08-24 09:09 ./slackware64/n/bluez-utils-3.36-x86_64-7.txt --rw-r--r-- 1 root root 408672 2009-08-24 09:09 ./slackware64/n/bluez-utils-3.36-x86_64-7.txz --rw-r--r-- 1 root root 197 2009-08-24 09:09 ./slackware64/n/bluez-utils-3.36-x86_64-7.txz.asc +-rw-r--r-- 1 root root 445 2010-05-02 08:11 ./slackware64/n/bluez-hcidump-1.42-x86_64-3.txt +-rw-r--r-- 1 root root 85692 2010-05-02 08:11 ./slackware64/n/bluez-hcidump-1.42-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-02 08:11 ./slackware64/n/bluez-hcidump-1.42-x86_64-3.txz.asc -rw-r--r-- 1 root root 420 2008-10-14 11:45 ./slackware64/n/bootp-2.4.3-x86_64-2.txt -rw-r--r-- 1 root root 49328 2008-10-14 11:45 ./slackware64/n/bootp-2.4.3-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-14 11:45 ./slackware64/n/bootp-2.4.3-x86_64-2.txz.asc @@ -2222,63 +2304,63 @@ drwxr-xr-x 2 root root 28672 2009-08-25 04:55 ./slackware64/n -rw-r--r-- 1 root root 613 2008-10-25 11:36 ./slackware64/n/bsd-finger-0.17-x86_64-1.txt -rw-r--r-- 1 root root 18984 2008-10-25 11:36 ./slackware64/n/bsd-finger-0.17-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-25 11:36 ./slackware64/n/bsd-finger-0.17-x86_64-1.txz.asc --rw-r--r-- 1 root root 415 2009-04-11 20:18 ./slackware64/n/crda-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 13208 2009-04-11 20:18 ./slackware64/n/crda-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-11 20:18 ./slackware64/n/crda-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 555 2009-08-13 03:36 ./slackware64/n/curl-7.19.6-x86_64-1.txt --rw-r--r-- 1 root root 616704 2009-08-13 03:36 ./slackware64/n/curl-7.19.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-13 03:36 ./slackware64/n/curl-7.19.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 415 2010-05-03 01:19 ./slackware64/n/crda-1.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 13484 2010-05-03 01:19 ./slackware64/n/crda-1.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 01:19 ./slackware64/n/crda-1.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 555 2010-04-29 01:30 ./slackware64/n/curl-7.20.1-x86_64-1.txt +-rw-r--r-- 1 root root 665452 2010-04-29 01:30 ./slackware64/n/curl-7.20.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 01:30 ./slackware64/n/curl-7.20.1-x86_64-1.txz.asc -rw-r--r-- 1 root root 375 2009-05-15 17:09 ./slackware64/n/cyrus-sasl-2.1.23-x86_64-1.txt -rw-r--r-- 1 root root 413528 2009-05-15 17:09 ./slackware64/n/cyrus-sasl-2.1.23-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-05-15 17:09 ./slackware64/n/cyrus-sasl-2.1.23-x86_64-1.txz.asc --rw-r--r-- 1 root root 644 2009-07-14 21:58 ./slackware64/n/dhcp-3.1.2p1-x86_64-1.txt --rw-r--r-- 1 root root 493060 2009-07-14 21:58 ./slackware64/n/dhcp-3.1.2p1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-14 21:58 ./slackware64/n/dhcp-3.1.2p1-x86_64-1.txz.asc --rw-r--r-- 1 root root 443 2009-03-09 15:38 ./slackware64/n/dhcpcd-3.2.3-x86_64-1.txt --rw-r--r-- 1 root root 35992 2009-03-09 15:38 ./slackware64/n/dhcpcd-3.2.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-09 15:38 ./slackware64/n/dhcpcd-3.2.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 494 2009-07-15 01:48 ./slackware64/n/dirmngr-1.0.3-x86_64-1.txt --rw-r--r-- 1 root root 202748 2009-07-15 01:48 ./slackware64/n/dirmngr-1.0.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-15 01:48 ./slackware64/n/dirmngr-1.0.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 396 2009-07-01 03:46 ./slackware64/n/dnsmasq-2.49-x86_64-1.txt --rw-r--r-- 1 root root 204152 2009-07-01 03:46 ./slackware64/n/dnsmasq-2.49-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-01 03:46 ./slackware64/n/dnsmasq-2.49-x86_64-1.txz.asc +-rw-r--r-- 1 root root 644 2010-03-13 00:20 ./slackware64/n/dhcp-4.1.1-x86_64-2.txt +-rw-r--r-- 1 root root 617572 2010-03-13 00:20 ./slackware64/n/dhcp-4.1.1-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-03-13 00:20 ./slackware64/n/dhcp-4.1.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 443 2010-04-30 01:55 ./slackware64/n/dhcpcd-5.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 60212 2010-04-30 01:55 ./slackware64/n/dhcpcd-5.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 01:55 ./slackware64/n/dhcpcd-5.2.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 494 2010-03-05 20:25 ./slackware64/n/dirmngr-1.0.3-x86_64-2.txt +-rw-r--r-- 1 root root 211600 2010-03-05 20:25 ./slackware64/n/dirmngr-1.0.3-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-03-05 20:25 ./slackware64/n/dirmngr-1.0.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 396 2010-02-11 21:47 ./slackware64/n/dnsmasq-2.52-x86_64-1.txt +-rw-r--r-- 1 root root 210924 2010-02-11 21:47 ./slackware64/n/dnsmasq-2.52-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-11 21:47 ./slackware64/n/dnsmasq-2.52-x86_64-1.txz.asc -rw-r--r-- 1 root root 224 2009-08-13 19:06 ./slackware64/n/elm-2.5.8-x86_64-3.txt -rw-r--r-- 1 root root 254788 2009-08-13 19:06 ./slackware64/n/elm-2.5.8-x86_64-3.txz -rw-r--r-- 1 root root 197 2009-08-13 19:06 ./slackware64/n/elm-2.5.8-x86_64-3.txz.asc --rw-r--r-- 1 root root 321 2009-05-23 04:32 ./slackware64/n/epic4-2.8-x86_64-2.txt --rw-r--r-- 1 root root 629208 2009-05-23 04:32 ./slackware64/n/epic4-2.8-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:32 ./slackware64/n/epic4-2.8-x86_64-2.txz.asc --rw-r--r-- 1 root root 441 2008-12-13 17:21 ./slackware64/n/ethtool-6-x86_64-1.txt --rw-r--r-- 1 root root 50184 2008-12-13 17:21 ./slackware64/n/ethtool-6-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-13 17:21 ./slackware64/n/ethtool-6-x86_64-1.txz.asc --rw-r--r-- 1 root root 607 2009-08-06 04:49 ./slackware64/n/fetchmail-6.3.11-x86_64-1.txt --rw-r--r-- 1 root root 566672 2009-08-06 04:49 ./slackware64/n/fetchmail-6.3.11-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-06 04:49 ./slackware64/n/fetchmail-6.3.11-x86_64-1.txz.asc --rw-r--r-- 1 root root 363 2009-08-22 19:55 ./slackware64/n/getmail-4.11.0-x86_64-1.txt --rw-r--r-- 1 root root 141184 2009-08-22 19:55 ./slackware64/n/getmail-4.11.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-22 19:55 ./slackware64/n/getmail-4.11.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 371 2008-10-14 12:11 ./slackware64/n/gnupg-1.4.9-x86_64-1.txt --rw-r--r-- 1 root root 1072076 2008-10-14 12:11 ./slackware64/n/gnupg-1.4.9-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-14 12:11 ./slackware64/n/gnupg-1.4.9-x86_64-1.txz.asc --rw-r--r-- 1 root root 601 2009-07-15 01:49 ./slackware64/n/gnupg2-2.0.12-x86_64-1.txt --rw-r--r-- 1 root root 1572996 2009-07-15 01:49 ./slackware64/n/gnupg2-2.0.12-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-15 01:49 ./slackware64/n/gnupg2-2.0.12-x86_64-1.txz.asc --rw-r--r-- 1 root root 493 2009-05-23 04:37 ./slackware64/n/gnutls-2.6.6-x86_64-2.txt --rw-r--r-- 1 root root 1448772 2009-05-23 04:37 ./slackware64/n/gnutls-2.6.6-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:37 ./slackware64/n/gnutls-2.6.6-x86_64-2.txz.asc +-rw-r--r-- 1 root root 321 2010-05-17 19:25 ./slackware64/n/epic5-1.1.2-x86_64-1.txt +-rw-r--r-- 1 root root 706312 2010-05-17 19:25 ./slackware64/n/epic5-1.1.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-17 19:25 ./slackware64/n/epic5-1.1.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 441 2010-05-03 01:28 ./slackware64/n/ethtool-2.6.33-x86_64-1.txt +-rw-r--r-- 1 root root 61900 2010-05-03 01:28 ./slackware64/n/ethtool-2.6.33-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 01:28 ./slackware64/n/ethtool-2.6.33-x86_64-1.txz.asc +-rw-r--r-- 1 root root 607 2010-05-16 05:40 ./slackware64/n/fetchmail-6.3.17-x86_64-1.txt +-rw-r--r-- 1 root root 570892 2010-05-16 05:40 ./slackware64/n/fetchmail-6.3.17-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-16 05:40 ./slackware64/n/fetchmail-6.3.17-x86_64-1.txz.asc +-rw-r--r-- 1 root root 363 2010-05-03 01:46 ./slackware64/n/getmail-4.17.0-x86_64-1.txt +-rw-r--r-- 1 root root 144744 2010-05-03 01:46 ./slackware64/n/getmail-4.17.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 01:46 ./slackware64/n/getmail-4.17.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 371 2010-03-05 23:42 ./slackware64/n/gnupg-1.4.10-x86_64-1.txt +-rw-r--r-- 1 root root 1129148 2010-03-05 23:42 ./slackware64/n/gnupg-1.4.10-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-05 23:42 ./slackware64/n/gnupg-1.4.10-x86_64-1.txz.asc +-rw-r--r-- 1 root root 601 2010-03-06 01:05 ./slackware64/n/gnupg2-2.0.14-x86_64-2.txt +-rw-r--r-- 1 root root 1629912 2010-03-06 01:05 ./slackware64/n/gnupg2-2.0.14-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-03-06 01:05 ./slackware64/n/gnupg2-2.0.14-x86_64-2.txz.asc +-rw-r--r-- 1 root root 493 2010-04-10 20:15 ./slackware64/n/gnutls-2.8.6-x86_64-1.txt +-rw-r--r-- 1 root root 1520468 2010-04-10 20:15 ./slackware64/n/gnutls-2.8.6-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-10 20:15 ./slackware64/n/gnutls-2.8.6-x86_64-1.txz.asc -rw-r--r-- 1 root root 287 2008-10-20 21:14 ./slackware64/n/gpa-0.7.5-x86_64-1.txt -rw-r--r-- 1 root root 185464 2008-10-20 21:14 ./slackware64/n/gpa-0.7.5-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-20 21:14 ./slackware64/n/gpa-0.7.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 539 2009-03-09 10:31 ./slackware64/n/gpgme-1.1.8-x86_64-1.txt --rw-r--r-- 1 root root 233608 2009-03-09 10:31 ./slackware64/n/gpgme-1.1.8-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-09 10:31 ./slackware64/n/gpgme-1.1.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 539 2010-03-06 01:03 ./slackware64/n/gpgme-1.2.0-x86_64-1.txt +-rw-r--r-- 1 root root 251412 2010-03-06 01:03 ./slackware64/n/gpgme-1.2.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-06 01:03 ./slackware64/n/gpgme-1.2.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 435 2008-10-15 16:36 ./slackware64/n/htdig-3.2.0b6-x86_64-3.txt -rw-r--r-- 1 root root 939096 2008-10-15 16:36 ./slackware64/n/htdig-3.2.0b6-x86_64-3.txz -rw-r--r-- 1 root root 197 2008-10-15 16:36 ./slackware64/n/htdig-3.2.0b6-x86_64-3.txz.asc --rw-r--r-- 1 root root 514 2009-08-10 19:08 ./slackware64/n/httpd-2.2.13-x86_64-1.txt --rw-r--r-- 1 root root 1441112 2009-08-10 19:08 ./slackware64/n/httpd-2.2.13-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-10 19:08 ./slackware64/n/httpd-2.2.13-x86_64-1.txz.asc +-rw-r--r-- 1 root root 514 2010-03-08 19:37 ./slackware64/n/httpd-2.2.15-x86_64-1.txt +-rw-r--r-- 1 root root 1468228 2010-03-08 19:37 ./slackware64/n/httpd-2.2.15-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-08 19:37 ./slackware64/n/httpd-2.2.15-x86_64-1.txz.asc -rw-r--r-- 1 root root 366 2008-10-25 12:08 ./slackware64/n/icmpinfo-1.11-x86_64-1.txt -rw-r--r-- 1 root root 9396 2008-10-25 12:08 ./slackware64/n/icmpinfo-1.11-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-25 12:08 ./slackware64/n/icmpinfo-1.11-x86_64-1.txz.asc @@ -2290,30 +2372,33 @@ drwxr-xr-x 2 root root 28672 2009-08-25 04:55 ./slackware64/n -rw-r--r-- 1 root root 197 2008-10-14 15:47 ./slackware64/n/inetd-1.79s-x86_64-8.txz.asc -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/n/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/n/install.end --rw-r--r-- 1 root root 478 2009-06-17 18:55 ./slackware64/n/iproute2-2.6.29_1-x86_64-2.txt --rw-r--r-- 1 root root 366748 2009-06-17 18:55 ./slackware64/n/iproute2-2.6.29_1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-17 18:55 ./slackware64/n/iproute2-2.6.29_1-x86_64-2.txz.asc --rw-r--r-- 1 root root 670 2009-06-12 23:01 ./slackware64/n/iptables-1.4.3.2-x86_64-1.txt --rw-r--r-- 1 root root 297212 2009-06-12 23:01 ./slackware64/n/iptables-1.4.3.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-12 23:01 ./slackware64/n/iptables-1.4.3.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 478 2010-03-13 00:52 ./slackware64/n/iproute2-2.6.33-x86_64-1.txt +-rw-r--r-- 1 root root 381976 2010-03-13 00:52 ./slackware64/n/iproute2-2.6.33-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-13 00:52 ./slackware64/n/iproute2-2.6.33-x86_64-1.txz.asc +-rw-r--r-- 1 root root 670 2010-03-13 00:21 ./slackware64/n/iptables-1.4.7-x86_64-1.txt +-rw-r--r-- 1 root root 276548 2010-03-13 00:21 ./slackware64/n/iptables-1.4.7-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-13 00:21 ./slackware64/n/iptables-1.4.7-x86_64-1.txz.asc -rw-r--r-- 1 root root 549 2009-05-23 04:39 ./slackware64/n/iptraf-3.0.0-x86_64-3.txt -rw-r--r-- 1 root root 280608 2009-05-23 04:39 ./slackware64/n/iptraf-3.0.0-x86_64-3.txz -rw-r--r-- 1 root root 197 2009-05-23 04:39 ./slackware64/n/iptraf-3.0.0-x86_64-3.txz.asc --rw-r--r-- 1 root root 423 2008-10-25 12:10 ./slackware64/n/iputils-s20070202-x86_64-2.txt --rw-r--r-- 1 root root 68752 2008-10-25 12:10 ./slackware64/n/iputils-s20070202-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-25 12:10 ./slackware64/n/iputils-s20070202-x86_64-2.txz.asc +-rw-r--r-- 1 root root 423 2010-05-10 08:07 ./slackware64/n/iputils-s20100418-x86_64-1.txt +-rw-r--r-- 1 root root 76096 2010-05-10 08:07 ./slackware64/n/iputils-s20100418-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-10 08:07 ./slackware64/n/iputils-s20100418-x86_64-1.txz.asc -rw-r--r-- 1 root root 479 2008-11-04 11:29 ./slackware64/n/ipw2100-fw-1.3-fw-1.txt -rw-r--r-- 1 root root 119440 2008-11-04 11:29 ./slackware64/n/ipw2100-fw-1.3-fw-1.txz -rw-r--r-- 1 root root 197 2008-11-04 11:29 ./slackware64/n/ipw2100-fw-1.3-fw-1.txz.asc --rw-r--r-- 1 root root 532 2008-11-04 11:29 ./slackware64/n/ipw2200-fw-3.0-fw-2.txt --rw-r--r-- 1 root root 117360 2008-11-04 11:29 ./slackware64/n/ipw2200-fw-3.0-fw-2.txz --rw-r--r-- 1 root root 197 2008-11-04 11:29 ./slackware64/n/ipw2200-fw-3.0-fw-2.txz.asc --rw-r--r-- 1 root root 333 2009-08-01 20:54 ./slackware64/n/irssi-0.8.14-x86_64-1.txt --rw-r--r-- 1 root root 1090896 2009-08-01 20:54 ./slackware64/n/irssi-0.8.14-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-01 20:54 ./slackware64/n/irssi-0.8.14-x86_64-1.txz.asc +-rw-r--r-- 1 root root 532 2010-05-03 03:32 ./slackware64/n/ipw2200-fw-3.1-fw-1.txt +-rw-r--r-- 1 root root 118824 2010-05-03 03:32 ./slackware64/n/ipw2200-fw-3.1-fw-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 03:32 ./slackware64/n/ipw2200-fw-3.1-fw-1.txz.asc +-rw-r--r-- 1 root root 333 2010-04-22 03:51 ./slackware64/n/irssi-0.8.15-x86_64-1.txt +-rw-r--r-- 1 root root 1107648 2010-04-22 03:51 ./slackware64/n/irssi-0.8.15-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-22 03:51 ./slackware64/n/irssi-0.8.15-x86_64-1.txz.asc -rw-r--r-- 1 root root 426 2009-06-12 23:55 ./slackware64/n/iw-0.9.14-x86_64-1.txt -rw-r--r-- 1 root root 24904 2009-06-12 23:55 ./slackware64/n/iw-0.9.14-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-12 23:55 ./slackware64/n/iw-0.9.14-x86_64-1.txz.asc +-rw-r--r-- 1 root root 484 2010-05-03 03:38 ./slackware64/n/iwlwifi-1000-ucode-128.50.3.1-fw-1.txt +-rw-r--r-- 1 root root 115892 2010-05-03 03:38 ./slackware64/n/iwlwifi-1000-ucode-128.50.3.1-fw-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 03:38 ./slackware64/n/iwlwifi-1000-ucode-128.50.3.1-fw-1.txz.asc -rw-r--r-- 1 root root 518 2009-07-01 18:12 ./slackware64/n/iwlwifi-3945-ucode-15.32.2.9-fw-1.txt -rw-r--r-- 1 root root 65720 2009-07-01 18:12 ./slackware64/n/iwlwifi-3945-ucode-15.32.2.9-fw-1.txz -rw-r--r-- 1 root root 197 2009-07-01 18:12 ./slackware64/n/iwlwifi-3945-ucode-15.32.2.9-fw-1.txz.asc @@ -2326,59 +2411,62 @@ drwxr-xr-x 2 root root 28672 2009-08-25 04:55 ./slackware64/n -rw-r--r-- 1 root root 509 2009-07-15 01:51 ./slackware64/n/iwlwifi-5150-ucode-8.24.2.2-fw-1.txt -rw-r--r-- 1 root root 115588 2009-07-15 01:51 ./slackware64/n/iwlwifi-5150-ucode-8.24.2.2-fw-1.txz -rw-r--r-- 1 root root 197 2009-07-15 01:51 ./slackware64/n/iwlwifi-5150-ucode-8.24.2.2-fw-1.txz.asc --rw-r--r-- 1 root root 582 2009-06-12 22:12 ./slackware64/n/lftp-3.7.14-x86_64-1.txt --rw-r--r-- 1 root root 646052 2009-06-12 22:12 ./slackware64/n/lftp-3.7.14-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-12 22:12 ./slackware64/n/lftp-3.7.14-x86_64-1.txz.asc --rw-r--r-- 1 root root 252 2008-10-14 13:01 ./slackware64/n/libassuan-1.0.4-x86_64-1.txt --rw-r--r-- 1 root root 91588 2008-10-14 13:01 ./slackware64/n/libassuan-1.0.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-14 13:01 ./slackware64/n/libassuan-1.0.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 245 2009-03-31 10:23 ./slackware64/n/libgcrypt-1.4.4-x86_64-1.txt --rw-r--r-- 1 root root 393880 2009-03-31 10:23 ./slackware64/n/libgcrypt-1.4.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-31 10:23 ./slackware64/n/libgcrypt-1.4.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 393 2009-03-09 10:25 ./slackware64/n/libgpg-error-1.7-x86_64-1.txt --rw-r--r-- 1 root root 63760 2009-03-09 10:25 ./slackware64/n/libgpg-error-1.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-09 10:25 ./slackware64/n/libgpg-error-1.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 332 2009-07-15 01:47 ./slackware64/n/libksba-1.0.6-x86_64-1.txt --rw-r--r-- 1 root root 127008 2009-07-15 01:47 ./slackware64/n/libksba-1.0.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-15 01:47 ./slackware64/n/libksba-1.0.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 446 2008-10-28 18:55 ./slackware64/n/links-2.2-x86_64-1.txt --rw-r--r-- 1 root root 1838132 2008-10-28 18:55 ./slackware64/n/links-2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-28 18:55 ./slackware64/n/links-2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 498 2009-05-23 04:43 ./slackware64/n/lynx-2.8.6rel.5-x86_64-2.txt --rw-r--r-- 1 root root 1520412 2009-05-23 04:43 ./slackware64/n/lynx-2.8.6rel.5-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:43 ./slackware64/n/lynx-2.8.6rel.5-x86_64-2.txz.asc +-rw-r--r-- 1 root root 484 2010-05-03 03:43 ./slackware64/n/iwlwifi-6000-ucode-9.193.4.1-fw-1.txt +-rw-r--r-- 1 root root 137572 2010-05-03 03:43 ./slackware64/n/iwlwifi-6000-ucode-9.193.4.1-fw-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 03:43 ./slackware64/n/iwlwifi-6000-ucode-9.193.4.1-fw-1.txz.asc +-rw-r--r-- 1 root root 582 2010-04-30 00:21 ./slackware64/n/lftp-4.0.7-x86_64-1.txt +-rw-r--r-- 1 root root 692932 2010-04-30 00:21 ./slackware64/n/lftp-4.0.7-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 00:21 ./slackware64/n/lftp-4.0.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 252 2010-03-06 00:55 ./slackware64/n/libassuan-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 99256 2010-03-06 00:55 ./slackware64/n/libassuan-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-06 00:55 ./slackware64/n/libassuan-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 245 2010-05-05 05:37 ./slackware64/n/libgcrypt-1.4.5-x86_64-2.txt +-rw-r--r-- 1 root root 398748 2010-05-05 05:37 ./slackware64/n/libgcrypt-1.4.5-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-05 05:37 ./slackware64/n/libgcrypt-1.4.5-x86_64-2.txz.asc +-rw-r--r-- 1 root root 393 2010-05-05 05:42 ./slackware64/n/libgpg-error-1.7-x86_64-2.txt +-rw-r--r-- 1 root root 69904 2010-05-05 05:42 ./slackware64/n/libgpg-error-1.7-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-05 05:42 ./slackware64/n/libgpg-error-1.7-x86_64-2.txz.asc +-rw-r--r-- 1 root root 332 2010-03-06 00:33 ./slackware64/n/libksba-1.0.7-x86_64-1.txt +-rw-r--r-- 1 root root 129080 2010-03-06 00:33 ./slackware64/n/libksba-1.0.7-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-06 00:33 ./slackware64/n/libksba-1.0.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 446 2010-02-18 20:46 ./slackware64/n/links-2.3pre1-x86_64-1.txt +-rw-r--r-- 1 root root 1869348 2010-02-18 20:46 ./slackware64/n/links-2.3pre1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-18 20:46 ./slackware64/n/links-2.3pre1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 498 2010-02-12 01:57 ./slackware64/n/lynx-2.8.7-x86_64-1.txt +-rw-r--r-- 1 root root 1615412 2010-02-12 01:57 ./slackware64/n/lynx-2.8.7-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-12 01:57 ./slackware64/n/lynx-2.8.7-x86_64-1.txz.asc -rw-r--r-- 1 root root 567 2009-08-11 01:02 ./slackware64/n/mailx-12.4-x86_64-1.txt -rw-r--r-- 1 root root 240064 2009-08-11 01:02 ./slackware64/n/mailx-12.4-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-08-11 01:02 ./slackware64/n/mailx-12.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 9610 2009-07-15 01:52 ./slackware64/n/maketag --rw-r--r-- 1 root root 9610 2009-07-15 01:52 ./slackware64/n/maketag.ez --rw-r--r-- 1 root root 418 2009-05-23 04:44 ./slackware64/n/mcabber-0.9.9-x86_64-2.txt --rw-r--r-- 1 root root 232524 2009-05-23 04:44 ./slackware64/n/mcabber-0.9.9-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:44 ./slackware64/n/mcabber-0.9.9-x86_64-2.txz.asc +-rw-r--r-- 1 root root 10104 2010-05-17 19:48 ./slackware64/n/maketag +-rw-r--r-- 1 root root 10104 2010-05-17 19:48 ./slackware64/n/maketag.ez +-rw-r--r-- 1 root root 418 2010-04-22 19:24 ./slackware64/n/mcabber-0.10.0-x86_64-1.txt +-rw-r--r-- 1 root root 217856 2010-04-22 19:24 ./slackware64/n/mcabber-0.10.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-22 19:24 ./slackware64/n/mcabber-0.10.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 468 2009-05-23 04:44 ./slackware64/n/metamail-2.7-x86_64-4.txt -rw-r--r-- 1 root root 125932 2009-05-23 04:44 ./slackware64/n/metamail-2.7-x86_64-4.txz -rw-r--r-- 1 root root 197 2009-05-23 04:44 ./slackware64/n/metamail-2.7-x86_64-4.txz.asc --rw-r--r-- 1 root root 325 2009-05-23 04:45 ./slackware64/n/mtr-0.73-x86_64-2.txt --rw-r--r-- 1 root root 50584 2009-05-23 04:45 ./slackware64/n/mtr-0.73-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:45 ./slackware64/n/mtr-0.73-x86_64-2.txz.asc +-rw-r--r-- 1 root root 325 2010-05-03 03:51 ./slackware64/n/mtr-0.75-x86_64-1.txt +-rw-r--r-- 1 root root 53848 2010-05-03 03:51 ./slackware64/n/mtr-0.75-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 03:51 ./slackware64/n/mtr-0.75-x86_64-1.txz.asc -rw-r--r-- 1 root root 411 2009-05-23 04:45 ./slackware64/n/mutt-1.4.2.3-x86_64-2.txt -rw-r--r-- 1 root root 702520 2009-05-23 04:45 ./slackware64/n/mutt-1.4.2.3-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 04:45 ./slackware64/n/mutt-1.4.2.3-x86_64-2.txz.asc -rw-r--r-- 1 root root 628 2008-10-28 20:33 ./slackware64/n/nc-1.10-x86_64-1.txt -rw-r--r-- 1 root root 53592 2008-10-28 20:33 ./slackware64/n/nc-1.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-28 20:33 ./slackware64/n/nc-1.10-x86_64-1.txz.asc --rw-r--r-- 1 root root 337 2009-05-23 04:48 ./slackware64/n/ncftp-3.2.2-x86_64-2.txt --rw-r--r-- 1 root root 260568 2009-05-23 04:48 ./slackware64/n/ncftp-3.2.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:48 ./slackware64/n/ncftp-3.2.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 451 2009-05-23 07:13 ./slackware64/n/net-snmp-5.4.2.1-x86_64-2.txt --rw-r--r-- 1 root root 1933716 2009-05-23 07:13 ./slackware64/n/net-snmp-5.4.2.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 07:13 ./slackware64/n/net-snmp-5.4.2.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 337 2010-05-03 05:25 ./slackware64/n/ncftp-3.2.4-x86_64-1.txt +-rw-r--r-- 1 root root 271316 2010-05-03 05:25 ./slackware64/n/ncftp-3.2.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 05:25 ./slackware64/n/ncftp-3.2.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 451 2010-01-12 23:47 ./slackware64/n/net-snmp-5.5-x86_64-2.txt +-rw-r--r-- 1 root root 1952068 2010-01-12 23:47 ./slackware64/n/net-snmp-5.5-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-01-12 23:47 ./slackware64/n/net-snmp-5.5-x86_64-2.txz.asc -rw-r--r-- 1 root root 449 2008-09-28 16:04 ./slackware64/n/net-tools-1.60-x86_64-2.txt -rw-r--r-- 1 root root 120592 2008-09-28 16:04 ./slackware64/n/net-tools-1.60-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-09-28 16:04 ./slackware64/n/net-tools-1.60-x86_64-2.txz.asc --rw-r--r-- 1 root root 581 2009-08-11 00:22 ./slackware64/n/netatalk-2.0.4-x86_64-2.txt --rw-r--r-- 1 root root 476224 2009-08-11 00:22 ./slackware64/n/netatalk-2.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-11 00:22 ./slackware64/n/netatalk-2.0.4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 581 2010-02-17 20:49 ./slackware64/n/netatalk-2.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 480208 2010-02-17 20:49 ./slackware64/n/netatalk-2.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-17 20:49 ./slackware64/n/netatalk-2.0.5-x86_64-1.txz.asc -rw-r--r-- 1 root root 649 2008-10-28 20:59 ./slackware64/n/netdate-bsd4-x86_64-1.txt -rw-r--r-- 1 root root 8812 2008-10-28 20:59 ./slackware64/n/netdate-bsd4-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-28 20:59 ./slackware64/n/netdate-bsd4-x86_64-1.txz.asc @@ -2415,127 +2503,139 @@ drwxr-xr-x 2 root root 28672 2009-08-25 04:55 ./slackware64/n -rw-r--r-- 1 root root 306 2009-05-23 04:52 ./slackware64/n/netwatch-1.3.0-x86_64-2.txt -rw-r--r-- 1 root root 95588 2009-05-23 04:52 ./slackware64/n/netwatch-1.3.0-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 04:52 ./slackware64/n/netwatch-1.3.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 583 2009-08-25 04:38 ./slackware64/n/network-scripts-13.0-noarch-2.txt --rw-r--r-- 1 root root 20032 2009-08-25 04:38 ./slackware64/n/network-scripts-13.0-noarch-2.txz --rw-r--r-- 1 root root 197 2009-08-25 04:38 ./slackware64/n/network-scripts-13.0-noarch-2.txz.asc +-rw-r--r-- 1 root root 583 2010-01-18 23:53 ./slackware64/n/network-scripts-13.0-noarch-3.txt +-rw-r--r-- 1 root root 19968 2010-01-18 23:53 ./slackware64/n/network-scripts-13.0-noarch-3.txz +-rw-r--r-- 1 root root 197 2010-01-18 23:53 ./slackware64/n/network-scripts-13.0-noarch-3.txz.asc -rw-r--r-- 1 root root 560 2008-10-28 21:07 ./slackware64/n/netwrite-0.17-x86_64-1.txt -rw-r--r-- 1 root root 6836 2008-10-28 21:07 ./slackware64/n/netwrite-0.17-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-28 21:07 ./slackware64/n/netwrite-0.17-x86_64-1.txz.asc -rw-r--r-- 1 root root 511 2008-10-28 21:08 ./slackware64/n/newspost-2.1.1-x86_64-1.txt -rw-r--r-- 1 root root 42084 2008-10-28 21:08 ./slackware64/n/newspost-2.1.1-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-28 21:08 ./slackware64/n/newspost-2.1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2008-10-28 10:50 ./slackware64/n/nfs-utils-1.1.4-x86_64-1.txt --rw-r--r-- 1 root root 161716 2008-10-28 10:50 ./slackware64/n/nfs-utils-1.1.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-28 10:50 ./slackware64/n/nfs-utils-1.1.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 652 2009-07-17 05:05 ./slackware64/n/nmap-5.00-x86_64-1.txt --rw-r--r-- 1 root root 1835304 2009-07-17 05:05 ./slackware64/n/nmap-5.00-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-17 05:05 ./slackware64/n/nmap-5.00-x86_64-1.txz.asc --rw-r--r-- 1 root root 444 2009-05-23 06:02 ./slackware64/n/nn-6.7.3-x86_64-2.txt --rw-r--r-- 1 root root 304732 2009-05-23 06:02 ./slackware64/n/nn-6.7.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 06:02 ./slackware64/n/nn-6.7.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 532 2009-06-03 21:07 ./slackware64/n/ntp-4.2.4p7-x86_64-1.txt --rw-r--r-- 1 root root 1195940 2009-06-03 21:07 ./slackware64/n/ntp-4.2.4p7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 21:07 ./slackware64/n/ntp-4.2.4p7-x86_64-1.txz.asc --rw-r--r-- 1 root root 466 2009-05-01 08:43 ./slackware64/n/obexftp-0.23-x86_64-1.txt --rw-r--r-- 1 root root 97928 2009-05-01 08:43 ./slackware64/n/obexftp-0.23-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-05-01 08:43 ./slackware64/n/obexftp-0.23-x86_64-1.txz.asc --rw-r--r-- 1 root root 565 2008-09-28 23:07 ./slackware64/n/openldap-client-2.3.43-x86_64-1.txt --rw-r--r-- 1 root root 311860 2008-09-28 23:07 ./slackware64/n/openldap-client-2.3.43-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-09-28 23:07 ./slackware64/n/openldap-client-2.3.43-x86_64-1.txz.asc --rw-r--r-- 1 root root 538 2008-11-26 18:53 ./slackware64/n/openobex-1.3-x86_64-3.txt --rw-r--r-- 1 root root 51396 2008-11-26 18:53 ./slackware64/n/openobex-1.3-x86_64-3.txz --rw-r--r-- 1 root root 197 2008-11-26 18:53 ./slackware64/n/openobex-1.3-x86_64-3.txz.asc --rw-r--r-- 1 root root 676 2009-05-23 06:04 ./slackware64/n/openssh-5.2p1-x86_64-2.txt --rw-r--r-- 1 root root 494148 2009-05-23 06:04 ./slackware64/n/openssh-5.2p1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 06:04 ./slackware64/n/openssh-5.2p1-x86_64-2.txz.asc --rw-r--r-- 1 root root 561 2009-04-29 11:07 ./slackware64/n/openssl-0.9.8k-x86_64-2.txt --rw-r--r-- 1 root root 2467436 2009-04-29 11:07 ./slackware64/n/openssl-0.9.8k-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-04-29 11:07 ./slackware64/n/openssl-0.9.8k-x86_64-2.txz.asc --rw-r--r-- 1 root root 430 2008-10-28 21:33 ./slackware64/n/openvpn-2.0.9-x86_64-1.txt --rw-r--r-- 1 root root 281992 2008-10-28 21:33 ./slackware64/n/openvpn-2.0.9-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-28 21:33 ./slackware64/n/openvpn-2.0.9-x86_64-1.txz.asc --rw-r--r-- 1 root root 376 2009-07-11 21:23 ./slackware64/n/php-5.2.10-x86_64-2.txt --rw-r--r-- 1 root root 4556872 2009-07-11 21:23 ./slackware64/n/php-5.2.10-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-07-11 21:23 ./slackware64/n/php-5.2.10-x86_64-2.txz.asc +-rw-r--r-- 1 root root 322 2010-05-03 05:37 ./slackware64/n/nfs-utils-1.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 186516 2010-05-03 05:37 ./slackware64/n/nfs-utils-1.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 05:37 ./slackware64/n/nfs-utils-1.2.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 652 2010-05-03 05:47 ./slackware64/n/nmap-5.21-x86_64-1.txt +-rw-r--r-- 1 root root 2743580 2010-05-03 05:47 ./slackware64/n/nmap-5.21-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 05:47 ./slackware64/n/nmap-5.21-x86_64-1.txz.asc +-rw-r--r-- 1 root root 444 2009-11-12 00:31 ./slackware64/n/nn-6.7.3-x86_64-3.txt +-rw-r--r-- 1 root root 303276 2009-11-12 00:31 ./slackware64/n/nn-6.7.3-x86_64-3.txz +-rw-r--r-- 1 root root 197 2009-11-12 00:31 ./slackware64/n/nn-6.7.3-x86_64-3.txz.asc +-rw-r--r-- 1 root root 532 2010-04-22 04:53 ./slackware64/n/ntp-4.2.6p1-x86_64-1.txt +-rw-r--r-- 1 root root 1498840 2010-04-22 04:53 ./slackware64/n/ntp-4.2.6p1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-22 04:53 ./slackware64/n/ntp-4.2.6p1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 430 2010-05-02 08:12 ./slackware64/n/obex-data-server-0.4.5-x86_64-1.txt +-rw-r--r-- 1 root root 69992 2010-05-02 08:12 ./slackware64/n/obex-data-server-0.4.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-02 08:12 ./slackware64/n/obex-data-server-0.4.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 419 2010-05-02 08:13 ./slackware64/n/obexfs-0.12-x86_64-1.txt +-rw-r--r-- 1 root root 20300 2010-05-02 08:13 ./slackware64/n/obexfs-0.12-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-02 08:13 ./slackware64/n/obexfs-0.12-x86_64-1.txz.asc +-rw-r--r-- 1 root root 466 2010-05-02 08:12 ./slackware64/n/obexftp-0.23-x86_64-3.txt +-rw-r--r-- 1 root root 96804 2010-05-02 08:12 ./slackware64/n/obexftp-0.23-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-02 08:12 ./slackware64/n/obexftp-0.23-x86_64-3.txz.asc +-rw-r--r-- 1 root root 565 2010-02-12 04:06 ./slackware64/n/openldap-client-2.4.21-x86_64-1.txt +-rw-r--r-- 1 root root 385660 2010-02-12 04:06 ./slackware64/n/openldap-client-2.4.21-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-12 04:06 ./slackware64/n/openldap-client-2.4.21-x86_64-1.txz.asc +-rw-r--r-- 1 root root 538 2010-05-02 08:12 ./slackware64/n/openobex-1.5-x86_64-1.txt +-rw-r--r-- 1 root root 52832 2010-05-02 08:12 ./slackware64/n/openobex-1.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-02 08:12 ./slackware64/n/openobex-1.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 676 2010-04-30 01:29 ./slackware64/n/openssh-5.5p1-x86_64-1.txt +-rw-r--r-- 1 root root 544756 2010-04-30 01:29 ./slackware64/n/openssh-5.5p1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 01:29 ./slackware64/n/openssh-5.5p1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 561 2010-03-29 22:38 ./slackware64/n/openssl-0.9.8n-x86_64-1.txt +-rw-r--r-- 1 root root 2405720 2010-03-29 22:38 ./slackware64/n/openssl-0.9.8n-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-29 22:38 ./slackware64/n/openssl-0.9.8n-x86_64-1.txz.asc +-rw-r--r-- 1 root root 430 2010-05-03 05:59 ./slackware64/n/openvpn-2.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 319900 2010-05-03 05:59 ./slackware64/n/openvpn-2.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 05:59 ./slackware64/n/openvpn-2.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 376 2010-03-21 21:05 ./slackware64/n/php-5.2.13-x86_64-2.txt +-rw-r--r-- 1 root root 4455072 2010-03-21 21:05 ./slackware64/n/php-5.2.13-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-03-21 21:05 ./slackware64/n/php-5.2.13-x86_64-2.txz.asc -rw-r--r-- 1 root root 578 2008-10-28 21:36 ./slackware64/n/pidentd-3.0.19-x86_64-1.txt -rw-r--r-- 1 root root 42368 2008-10-28 21:36 ./slackware64/n/pidentd-3.0.19-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-28 21:36 ./slackware64/n/pidentd-3.0.19-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-08-18 18:44 ./slackware64/n/pinentry-0.7.6-x86_64-1.txt --rw-r--r-- 1 root root 105260 2009-08-18 18:44 ./slackware64/n/pinentry-0.7.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-18 18:44 ./slackware64/n/pinentry-0.7.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-03-06 00:39 ./slackware64/n/pinentry-0.8.0-x86_64-1.txt +-rw-r--r-- 1 root root 117340 2010-03-06 00:39 ./slackware64/n/pinentry-0.8.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-06 00:39 ./slackware64/n/pinentry-0.8.0-x86_64-1.txz.asc -rw-r--r-- 1 root root 545 2008-10-31 09:53 ./slackware64/n/popa3d-1.0.2-x86_64-2.txt -rw-r--r-- 1 root root 20584 2008-10-31 09:53 ./slackware64/n/popa3d-1.0.2-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-31 09:53 ./slackware64/n/popa3d-1.0.2-x86_64-2.txz.asc -rw-r--r-- 1 root root 529 2008-10-14 18:37 ./slackware64/n/portmap-6.0-x86_64-1.txt -rw-r--r-- 1 root root 27588 2008-10-14 18:37 ./slackware64/n/portmap-6.0-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-14 18:37 ./slackware64/n/portmap-6.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 451 2008-10-31 10:30 ./slackware64/n/ppp-2.4.4-x86_64-1.txt --rw-r--r-- 1 root root 351424 2008-10-31 10:30 ./slackware64/n/ppp-2.4.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-31 10:30 ./slackware64/n/ppp-2.4.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 451 2010-02-12 02:08 ./slackware64/n/ppp-2.4.5-x86_64-1.txt +-rw-r--r-- 1 root root 367944 2010-02-12 02:08 ./slackware64/n/ppp-2.4.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-12 02:08 ./slackware64/n/ppp-2.4.5-x86_64-1.txz.asc -rw-r--r-- 1 root root 687 2008-10-31 11:09 ./slackware64/n/procmail-3.22-x86_64-2.txt -rw-r--r-- 1 root root 132440 2008-10-31 11:09 ./slackware64/n/procmail-3.22-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-31 11:09 ./slackware64/n/procmail-3.22-x86_64-2.txz.asc --rw-r--r-- 1 root root 339 2009-05-23 06:23 ./slackware64/n/proftpd-1.3.2-x86_64-2.txt --rw-r--r-- 1 root root 730776 2009-05-23 06:23 ./slackware64/n/proftpd-1.3.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 06:23 ./slackware64/n/proftpd-1.3.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 488 2008-10-31 11:31 ./slackware64/n/pssh-1.3.1-noarch-1.txt --rw-r--r-- 1 root root 11096 2008-10-31 11:31 ./slackware64/n/pssh-1.3.1-noarch-1.txz --rw-r--r-- 1 root root 197 2008-10-31 11:31 ./slackware64/n/pssh-1.3.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 339 2010-03-29 23:43 ./slackware64/n/proftpd-1.3.3-x86_64-2.txt +-rw-r--r-- 1 root root 779392 2010-03-29 23:43 ./slackware64/n/proftpd-1.3.3-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-03-29 23:43 ./slackware64/n/proftpd-1.3.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 534 2010-05-03 06:05 ./slackware64/n/pssh-2.1.1-noarch-1.txt +-rw-r--r-- 1 root root 15736 2010-05-03 06:05 ./slackware64/n/pssh-2.1.1-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 06:05 ./slackware64/n/pssh-2.1.1-noarch-1.txz.asc -rw-r--r-- 1 root root 472 2008-10-14 13:00 ./slackware64/n/pth-2.0.7-x86_64-1.txt -rw-r--r-- 1 root root 101100 2008-10-14 13:00 ./slackware64/n/pth-2.0.7-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-14 13:00 ./slackware64/n/pth-2.0.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 355 2008-10-31 11:33 ./slackware64/n/rdist-6.1.5-x86_64-1.txt --rw-r--r-- 1 root root 55360 2008-10-31 11:33 ./slackware64/n/rdist-6.1.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-31 11:33 ./slackware64/n/rdist-6.1.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 355 2010-01-25 21:41 ./slackware64/n/rdist-6.1.5-x86_64-2.txt +-rw-r--r-- 1 root root 59660 2010-01-25 21:41 ./slackware64/n/rdist-6.1.5-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-01-25 21:41 ./slackware64/n/rdist-6.1.5-x86_64-2.txz.asc -rw-r--r-- 1 root root 499 2008-10-31 11:43 ./slackware64/n/rp-pppoe-3.10-x86_64-1.txt -rw-r--r-- 1 root root 84764 2008-10-31 11:43 ./slackware64/n/rp-pppoe-3.10-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-31 11:43 ./slackware64/n/rp-pppoe-3.10-x86_64-1.txz.asc --rw-r--r-- 1 root root 494 2009-05-16 00:21 ./slackware64/n/rsync-3.0.6-x86_64-1.txt --rw-r--r-- 1 root root 267532 2009-05-16 00:21 ./slackware64/n/rsync-3.0.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-05-16 00:21 ./slackware64/n/rsync-3.0.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 494 2010-03-01 01:33 ./slackware64/n/rsync-3.0.7-x86_64-1.txt +-rw-r--r-- 1 root root 270884 2010-03-01 01:33 ./slackware64/n/rsync-3.0.7-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-03-01 01:33 ./slackware64/n/rsync-3.0.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 450 2010-05-16 23:04 ./slackware64/n/rt2860-firmware-26-fw-1.txt +-rw-r--r-- 1 root root 4656 2010-05-16 23:04 ./slackware64/n/rt2860-firmware-26-fw-1.txz +-rw-r--r-- 1 root root 198 2010-05-16 23:04 ./slackware64/n/rt2860-firmware-26-fw-1.txz.asc +-rw-r--r-- 1 root root 341 2010-05-16 23:04 ./slackware64/n/rt2870-firmware-22-fw-1.txt +-rw-r--r-- 1 root root 3692 2010-05-16 23:04 ./slackware64/n/rt2870-firmware-22-fw-1.txz +-rw-r--r-- 1 root root 198 2010-05-16 23:04 ./slackware64/n/rt2870-firmware-22-fw-1.txz.asc -rw-r--r-- 1 root root 273 2008-11-04 11:37 ./slackware64/n/rt61-firmware-1.2-fw-1.txt -rw-r--r-- 1 root root 7224 2008-11-04 11:37 ./slackware64/n/rt61-firmware-1.2-fw-1.txz -rw-r--r-- 1 root root 197 2008-11-04 11:37 ./slackware64/n/rt61-firmware-1.2-fw-1.txz.asc -rw-r--r-- 1 root root 287 2008-11-04 11:49 ./slackware64/n/rt71w-firmware-1.8-fw-1.txt -rw-r--r-- 1 root root 2808 2008-11-04 11:49 ./slackware64/n/rt71w-firmware-1.8-fw-1.txz -rw-r--r-- 1 root root 197 2008-11-04 11:49 ./slackware64/n/rt71w-firmware-1.8-fw-1.txz.asc --rw-r--r-- 1 root root 555 2009-06-26 04:22 ./slackware64/n/samba-3.2.13-x86_64-1.txt --rw-r--r-- 1 root root 17557044 2009-06-26 04:22 ./slackware64/n/samba-3.2.13-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-26 04:22 ./slackware64/n/samba-3.2.13-x86_64-1.txz.asc --rw-r--r-- 1 root root 503 2009-06-26 19:59 ./slackware64/n/sendmail-8.14.3-x86_64-2.txt --rw-r--r-- 1 root root 942004 2009-06-26 19:59 ./slackware64/n/sendmail-8.14.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-26 19:59 ./slackware64/n/sendmail-8.14.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 588 2009-06-26 19:59 ./slackware64/n/sendmail-cf-8.14.3-noarch-2.txt --rw-r--r-- 1 root root 114356 2009-06-26 19:59 ./slackware64/n/sendmail-cf-8.14.3-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-26 19:59 ./slackware64/n/sendmail-cf-8.14.3-noarch-2.txz.asc --rw-r--r-- 1 root root 309 2008-11-26 20:05 ./slackware64/n/slrn-0.9.9p1-x86_64-2.txt --rw-r--r-- 1 root root 454304 2008-11-26 20:05 ./slackware64/n/slrn-0.9.9p1-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-11-26 20:05 ./slackware64/n/slrn-0.9.9p1-x86_64-2.txz.asc --rw-r--r-- 1 root root 415 2009-07-17 23:03 ./slackware64/n/snownews-1.5.11-x86_64-2.txt --rw-r--r-- 1 root root 126472 2009-07-17 23:03 ./slackware64/n/snownews-1.5.11-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-07-17 23:03 ./slackware64/n/snownews-1.5.11-x86_64-2.txz.asc --rw-r--r-- 1 root root 510 2008-10-31 13:17 ./slackware64/n/stunnel-4.17-x86_64-1.txt --rw-r--r-- 1 root root 103788 2008-10-31 13:17 ./slackware64/n/stunnel-4.17-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-31 13:17 ./slackware64/n/stunnel-4.17-x86_64-1.txz.asc --rw-r--r-- 1 root root 1594 2009-07-15 01:52 ./slackware64/n/tagfile +-rw-r--r-- 1 root root 555 2010-04-26 02:55 ./slackware64/n/samba-3.5.2-x86_64-1.txt +-rw-r--r-- 1 root root 20139000 2010-04-26 02:55 ./slackware64/n/samba-3.5.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-26 02:55 ./slackware64/n/samba-3.5.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 503 2010-04-23 22:56 ./slackware64/n/sendmail-8.14.4-x86_64-1.txt +-rw-r--r-- 1 root root 949108 2010-04-23 22:56 ./slackware64/n/sendmail-8.14.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-23 22:56 ./slackware64/n/sendmail-8.14.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 588 2010-04-23 22:56 ./slackware64/n/sendmail-cf-8.14.4-noarch-1.txt +-rw-r--r-- 1 root root 114172 2010-04-23 22:56 ./slackware64/n/sendmail-cf-8.14.4-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-23 22:56 ./slackware64/n/sendmail-cf-8.14.4-noarch-1.txz.asc +-rw-r--r-- 1 root root 309 2010-05-19 02:27 ./slackware64/n/slrn-0.9.9p1-x86_64-3.txt +-rw-r--r-- 1 root root 460120 2010-05-19 02:27 ./slackware64/n/slrn-0.9.9p1-x86_64-3.txz +-rw-r--r-- 1 root root 198 2010-05-19 02:27 ./slackware64/n/slrn-0.9.9p1-x86_64-3.txz.asc +-rw-r--r-- 1 root root 415 2010-05-03 01:12 ./slackware64/n/snownews-1.5.12-x86_64-1.txt +-rw-r--r-- 1 root root 125584 2010-05-03 01:12 ./slackware64/n/snownews-1.5.12-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 01:12 ./slackware64/n/snownews-1.5.12-x86_64-1.txz.asc +-rw-r--r-- 1 root root 510 2010-05-03 06:39 ./slackware64/n/stunnel-4.33-x86_64-1.txt +-rw-r--r-- 1 root root 127456 2010-05-03 06:39 ./slackware64/n/stunnel-4.33-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 06:39 ./slackware64/n/stunnel-4.33-x86_64-1.txz.asc +-rw-r--r-- 1 root root 1691 2010-05-17 19:48 ./slackware64/n/tagfile -rw-r--r-- 1 root root 649 2008-10-13 20:26 ./slackware64/n/tcp_wrappers-7.6-x86_64-1.txt -rw-r--r-- 1 root root 78592 2008-10-13 20:26 ./slackware64/n/tcp_wrappers-7.6-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-10-13 20:26 ./slackware64/n/tcp_wrappers-7.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2008-11-26 16:23 ./slackware64/n/tcpdump-4.0.0-x86_64-1.txt --rw-r--r-- 1 root root 471672 2008-11-26 16:23 ./slackware64/n/tcpdump-4.0.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-26 16:23 ./slackware64/n/tcpdump-4.0.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2009-11-23 21:02 ./slackware64/n/tcpdump-4.0.0-x86_64-2.txt +-rw-r--r-- 1 root root 491728 2009-11-23 21:02 ./slackware64/n/tcpdump-4.0.0-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-11-23 21:02 ./slackware64/n/tcpdump-4.0.0-x86_64-2.txz.asc -rw-r--r-- 1 root root 557 2009-05-23 06:39 ./slackware64/n/telnet-0.17-x86_64-2.txt -rw-r--r-- 1 root root 63900 2009-05-23 06:39 ./slackware64/n/telnet-0.17-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 06:39 ./slackware64/n/telnet-0.17-x86_64-2.txz.asc --rw-r--r-- 1 root root 555 2008-10-31 13:28 ./slackware64/n/tftp-hpa-0.48-x86_64-1.txt --rw-r--r-- 1 root root 49792 2008-10-31 13:28 ./slackware64/n/tftp-hpa-0.48-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-31 13:28 ./slackware64/n/tftp-hpa-0.48-x86_64-1.txz.asc +-rw-r--r-- 1 root root 555 2010-05-03 06:43 ./slackware64/n/tftp-hpa-0.49-x86_64-1.txt +-rw-r--r-- 1 root root 49348 2010-05-03 06:43 ./slackware64/n/tftp-hpa-0.49-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 06:43 ./slackware64/n/tftp-hpa-0.49-x86_64-1.txz.asc -rw-r--r-- 1 root root 490 2009-05-23 06:40 ./slackware64/n/tin-1.8.2-x86_64-2.txt -rw-r--r-- 1 root root 523776 2009-05-23 06:40 ./slackware64/n/tin-1.8.2-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 06:40 ./slackware64/n/tin-1.8.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 508 2008-10-31 13:36 ./slackware64/n/traceroute-1.4a12-x86_64-2.txt --rw-r--r-- 1 root root 20048 2008-10-31 13:36 ./slackware64/n/traceroute-1.4a12-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-31 13:36 ./slackware64/n/traceroute-1.4a12-x86_64-2.txz.asc +-rw-r--r-- 1 root root 508 2010-05-10 08:27 ./slackware64/n/traceroute-2.0.14-x86_64-1.txt +-rw-r--r-- 1 root root 47144 2010-05-10 08:27 ./slackware64/n/traceroute-2.0.14-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-10 08:27 ./slackware64/n/traceroute-2.0.14-x86_64-1.txz.asc -rw-r--r-- 1 root root 290 2009-05-23 06:43 ./slackware64/n/trn-3.6-x86_64-2.txt -rw-r--r-- 1 root root 188992 2009-05-23 06:43 ./slackware64/n/trn-3.6-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 06:43 ./slackware64/n/trn-3.6-x86_64-2.txz.asc @@ -2545,49 +2645,49 @@ drwxr-xr-x 2 root root 28672 2009-08-25 04:55 ./slackware64/n -rw-r--r-- 1 root root 433 2008-10-31 13:54 ./slackware64/n/vlan-1.9-x86_64-2.txt -rw-r--r-- 1 root root 24048 2008-10-31 13:54 ./slackware64/n/vlan-1.9-x86_64-2.txz -rw-r--r-- 1 root root 197 2008-10-31 13:54 ./slackware64/n/vlan-1.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 496 2009-06-06 21:25 ./slackware64/n/vsftpd-2.1.2-x86_64-1.txt --rw-r--r-- 1 root root 119856 2009-06-06 21:25 ./slackware64/n/vsftpd-2.1.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-06 21:25 ./slackware64/n/vsftpd-2.1.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 398 2008-10-07 17:50 ./slackware64/n/wget-1.11.4-x86_64-1.txt --rw-r--r-- 1 root root 379692 2008-10-07 17:50 ./slackware64/n/wget-1.11.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-07 17:50 ./slackware64/n/wget-1.11.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 385 2008-10-14 18:24 ./slackware64/n/whois-4.7.26-x86_64-1.txt --rw-r--r-- 1 root root 37112 2008-10-14 18:24 ./slackware64/n/whois-4.7.26-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-14 18:24 ./slackware64/n/whois-4.7.26-x86_64-1.txz.asc --rw-r--r-- 1 root root 682 2009-04-28 17:32 ./slackware64/n/wireless-tools-29-x86_64-5.txt --rw-r--r-- 1 root root 129932 2009-04-28 17:32 ./slackware64/n/wireless-tools-29-x86_64-5.txz --rw-r--r-- 1 root root 197 2009-04-28 17:32 ./slackware64/n/wireless-tools-29-x86_64-5.txz.asc --rw-r--r-- 1 root root 603 2009-05-23 06:44 ./slackware64/n/wpa_supplicant-0.6.9-x86_64-2.txt --rw-r--r-- 1 root root 326344 2009-05-23 06:44 ./slackware64/n/wpa_supplicant-0.6.9-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 06:44 ./slackware64/n/wpa_supplicant-0.6.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 407 2008-10-31 14:00 ./slackware64/n/yptools-2.9-x86_64-1.txt --rw-r--r-- 1 root root 161816 2008-10-31 14:00 ./slackware64/n/yptools-2.9-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-31 14:00 ./slackware64/n/yptools-2.9-x86_64-1.txz.asc +-rw-r--r-- 1 root root 496 2010-02-09 21:51 ./slackware64/n/vsftpd-2.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 118712 2010-02-09 21:51 ./slackware64/n/vsftpd-2.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-09 21:51 ./slackware64/n/vsftpd-2.2.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 398 2010-02-09 21:45 ./slackware64/n/wget-1.12-x86_64-1.txt +-rw-r--r-- 1 root root 444808 2010-02-09 21:45 ./slackware64/n/wget-1.12-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-09 21:45 ./slackware64/n/wget-1.12-x86_64-1.txz.asc +-rw-r--r-- 1 root root 385 2010-04-29 02:25 ./slackware64/n/whois-5.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 43972 2010-04-29 02:25 ./slackware64/n/whois-5.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-29 02:25 ./slackware64/n/whois-5.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 682 2010-01-03 00:15 ./slackware64/n/wireless-tools-29-x86_64-6.txt +-rw-r--r-- 1 root root 130976 2010-01-03 00:15 ./slackware64/n/wireless-tools-29-x86_64-6.txz +-rw-r--r-- 1 root root 197 2010-01-03 00:15 ./slackware64/n/wireless-tools-29-x86_64-6.txz.asc +-rw-r--r-- 1 root root 603 2010-02-20 06:46 ./slackware64/n/wpa_supplicant-0.6.10-x86_64-1.txt +-rw-r--r-- 1 root root 326792 2010-02-20 06:46 ./slackware64/n/wpa_supplicant-0.6.10-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-20 06:46 ./slackware64/n/wpa_supplicant-0.6.10-x86_64-1.txz.asc +-rw-r--r-- 1 root root 407 2010-05-03 06:51 ./slackware64/n/yptools-2.12-x86_64-1.txt +-rw-r--r-- 1 root root 178848 2010-05-03 06:51 ./slackware64/n/yptools-2.12-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 06:51 ./slackware64/n/yptools-2.12-x86_64-1.txz.asc -rw-r--r-- 1 root root 289 2009-05-23 06:55 ./slackware64/n/ytalk-3.3.0-x86_64-2.txt -rw-r--r-- 1 root root 49704 2009-05-23 06:55 ./slackware64/n/ytalk-3.3.0-x86_64-2.txz -rw-r--r-- 1 root root 197 2009-05-23 06:55 ./slackware64/n/ytalk-3.3.0-x86_64-2.txz.asc -rw-r--r-- 1 root root 651 2008-11-04 11:50 ./slackware64/n/zd1211-firmware-1.4-fw-1.txt -rw-r--r-- 1 root root 33896 2008-11-04 11:50 ./slackware64/n/zd1211-firmware-1.4-fw-1.txz -rw-r--r-- 1 root root 197 2008-11-04 11:50 ./slackware64/n/zd1211-firmware-1.4-fw-1.txz.asc -drwxr-xr-x 2 root root 4096 2009-08-13 01:18 ./slackware64/t +drwxr-xr-x 2 root root 4096 2010-05-17 23:32 ./slackware64/t -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/t/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/t/install.end --rw-r--r-- 1 root root 1157 2009-04-30 20:01 ./slackware64/t/maketag --rw-r--r-- 1 root root 1157 2009-04-30 20:01 ./slackware64/t/maketag.ez --rw-r--r-- 1 root root 46 2009-04-30 20:01 ./slackware64/t/tagfile --rw-r--r-- 1 root root 338 2009-06-09 20:01 ./slackware64/t/tetex-3.0-x86_64-6.txt --rw-r--r-- 1 root root 36557048 2009-06-09 20:01 ./slackware64/t/tetex-3.0-x86_64-6.txz --rw-r--r-- 1 root root 197 2009-06-09 20:01 ./slackware64/t/tetex-3.0-x86_64-6.txz.asc --rw-r--r-- 1 root root 524 2009-06-09 20:02 ./slackware64/t/tetex-doc-3.0-x86_64-6.txt --rw-r--r-- 1 root root 43928904 2009-06-09 20:02 ./slackware64/t/tetex-doc-3.0-x86_64-6.txz --rw-r--r-- 1 root root 197 2009-06-09 20:02 ./slackware64/t/tetex-doc-3.0-x86_64-6.txz.asc --rw-r--r-- 1 root root 444 2009-03-16 21:31 ./slackware64/t/transfig-3.2.4-x86_64-2.txt --rw-r--r-- 1 root root 208876 2009-03-16 21:31 ./slackware64/t/transfig-3.2.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-03-16 21:31 ./slackware64/t/transfig-3.2.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 431 2009-03-16 21:44 ./slackware64/t/xfig-3.2.4-x86_64-3.txt --rw-r--r-- 1 root root 3022232 2009-03-16 21:44 ./slackware64/t/xfig-3.2.4-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-03-16 21:44 ./slackware64/t/xfig-3.2.4-x86_64-3.txz.asc -drwxr-xr-x 2 root root 4096 2009-05-19 20:55 ./slackware64/tcl +-rw-r--r-- 1 root root 1157 2010-03-01 01:46 ./slackware64/t/maketag +-rw-r--r-- 1 root root 1157 2010-03-01 01:46 ./slackware64/t/maketag.ez +-rw-r--r-- 1 root root 46 2010-03-01 01:46 ./slackware64/t/tagfile +-rw-r--r-- 1 root root 338 2010-05-17 19:37 ./slackware64/t/tetex-3.0-x86_64-8.txt +-rw-r--r-- 1 root root 36585468 2010-05-17 19:37 ./slackware64/t/tetex-3.0-x86_64-8.txz +-rw-r--r-- 1 root root 198 2010-05-17 19:37 ./slackware64/t/tetex-3.0-x86_64-8.txz.asc +-rw-r--r-- 1 root root 524 2010-05-17 19:38 ./slackware64/t/tetex-doc-3.0-x86_64-8.txt +-rw-r--r-- 1 root root 43929492 2010-05-17 19:38 ./slackware64/t/tetex-doc-3.0-x86_64-8.txz +-rw-r--r-- 1 root root 198 2010-05-17 19:38 ./slackware64/t/tetex-doc-3.0-x86_64-8.txz.asc +-rw-r--r-- 1 root root 444 2010-02-20 01:27 ./slackware64/t/transfig-3.2.4-x86_64-3.txt +-rw-r--r-- 1 root root 209952 2010-02-20 01:27 ./slackware64/t/transfig-3.2.4-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-20 01:27 ./slackware64/t/transfig-3.2.4-x86_64-3.txz.asc +-rw-r--r-- 1 root root 431 2010-02-21 17:16 ./slackware64/t/xfig-3.2.4-x86_64-5.txt +-rw-r--r-- 1 root root 3014444 2010-02-21 17:16 ./slackware64/t/xfig-3.2.4-x86_64-5.txz +-rw-r--r-- 1 root root 197 2010-02-21 17:16 ./slackware64/t/xfig-3.2.4-x86_64-5.txz.asc +drwxr-xr-x 2 root root 4096 2009-12-07 02:34 ./slackware64/tcl -rw-r--r-- 1 root root 533 2009-05-12 20:41 ./slackware64/tcl/expect-5.44.1.11-x86_64-3.txt -rw-r--r-- 1 root root 301320 2009-05-12 20:41 ./slackware64/tcl/expect-5.44.1.11-x86_64-3.txz -rw-r--r-- 1 root root 197 2009-05-12 20:41 ./slackware64/tcl/expect-5.44.1.11-x86_64-3.txz.asc @@ -2596,3196 +2696,3391 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:55 ./slackware64/tcl -rw-r--r-- 1 root root 197 2008-11-06 11:59 ./slackware64/tcl/hfsutils-3.2.6-x86_64-4.txz.asc -rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/tcl/install-packages -rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/tcl/install.end --rw-r--r-- 1 root root 1285 2009-04-30 20:01 ./slackware64/tcl/maketag --rw-r--r-- 1 root root 1285 2009-04-30 20:01 ./slackware64/tcl/maketag.ez --rw-r--r-- 1 root root 56 2009-04-30 20:01 ./slackware64/tcl/tagfile --rw-r--r-- 1 root root 259 2009-04-29 19:40 ./slackware64/tcl/tcl-8.5.7-x86_64-1.txt --rw-r--r-- 1 root root 1703356 2009-04-29 19:40 ./slackware64/tcl/tcl-8.5.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-29 19:40 ./slackware64/tcl/tcl-8.5.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 555 2008-11-04 11:21 ./slackware64/tcl/tclx-8.4-x86_64-2.txt --rw-r--r-- 1 root root 112680 2008-11-04 11:21 ./slackware64/tcl/tclx-8.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-11-04 11:21 ./slackware64/tcl/tclx-8.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 406 2008-12-13 18:46 ./slackware64/tcl/tix-8.4.3-x86_64-1.txt --rw-r--r-- 1 root root 536384 2008-12-13 18:46 ./slackware64/tcl/tix-8.4.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-12-13 18:46 ./slackware64/tcl/tix-8.4.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 198 2009-04-29 19:43 ./slackware64/tcl/tk-8.5.7-x86_64-1.txt --rw-r--r-- 1 root root 1648848 2009-04-29 19:43 ./slackware64/tcl/tk-8.5.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-29 19:43 ./slackware64/tcl/tk-8.5.7-x86_64-1.txz.asc -drwxr-xr-x 2 root root 77824 2009-08-21 04:04 ./slackware64/x +-rw-r--r-- 1 root root 1285 2010-03-01 01:46 ./slackware64/tcl/maketag +-rw-r--r-- 1 root root 1285 2010-03-01 01:46 ./slackware64/tcl/maketag.ez +-rw-r--r-- 1 root root 56 2010-03-01 01:46 ./slackware64/tcl/tagfile +-rw-r--r-- 1 root root 259 2009-12-07 00:44 ./slackware64/tcl/tcl-8.5.8-x86_64-1.txt +-rw-r--r-- 1 root root 1712164 2009-12-07 00:44 ./slackware64/tcl/tcl-8.5.8-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-07 00:44 ./slackware64/tcl/tcl-8.5.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 555 2009-12-07 00:52 ./slackware64/tcl/tclx-8.4-x86_64-3.txt +-rw-r--r-- 1 root root 113312 2009-12-07 00:52 ./slackware64/tcl/tclx-8.4-x86_64-3.txz +-rw-r--r-- 1 root root 197 2009-12-07 00:52 ./slackware64/tcl/tclx-8.4-x86_64-3.txz.asc +-rw-r--r-- 1 root root 406 2009-12-07 00:50 ./slackware64/tcl/tix-8.4.3-x86_64-2.txt +-rw-r--r-- 1 root root 538204 2009-12-07 00:50 ./slackware64/tcl/tix-8.4.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-12-07 00:50 ./slackware64/tcl/tix-8.4.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 198 2009-12-07 00:48 ./slackware64/tcl/tk-8.5.8-x86_64-1.txt +-rw-r--r-- 1 root root 1654524 2009-12-07 00:48 ./slackware64/tcl/tk-8.5.8-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-12-07 00:48 ./slackware64/tcl/tk-8.5.8-x86_64-1.txz.asc +drwxr-xr-x 2 root root 57344 2010-05-14 19:52 ./slackware64/x -rw-r--r-- 1 root root 258 2008-11-05 12:50 ./slackware64/x/anthy-9100e-x86_64-1.txt -rw-r--r-- 1 root root 4869552 2008-11-05 12:50 ./slackware64/x/anthy-9100e-x86_64-1.txz -rw-r--r-- 1 root root 197 2008-11-05 12:50 ./slackware64/x/anthy-9100e-x86_64-1.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:36 ./slackware64/x/appres-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 5028 2009-06-03 05:36 ./slackware64/x/appres-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:36 ./slackware64/x/appres-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:36 ./slackware64/x/bdftopcf-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 5044 2009-06-03 05:36 ./slackware64/x/bdftopcf-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:36 ./slackware64/x/bdftopcf-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:09 ./slackware64/x/appres-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 8972 2010-02-22 20:09 ./slackware64/x/appres-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:09 ./slackware64/x/appres-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:09 ./slackware64/x/bdftopcf-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 9056 2010-02-22 20:09 ./slackware64/x/bdftopcf-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:09 ./slackware64/x/bdftopcf-1.0.2-x86_64-1.txz.asc -rw-r--r-- 1 root root 335 2009-06-03 05:36 ./slackware64/x/beforelight-1.0.3-x86_64-1.txt -rw-r--r-- 1 root root 5568 2009-06-03 05:36 ./slackware64/x/beforelight-1.0.3-x86_64-1.txz -rw-r--r-- 1 root root 197 2009-06-03 05:36 ./slackware64/x/beforelight-1.0.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 348 2009-06-03 05:25 ./slackware64/x/bigreqsproto-1.0.2-noarch-2.txt --rw-r--r-- 1 root root 1804 2009-06-03 05:25 ./slackware64/x/bigreqsproto-1.0.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/bigreqsproto-1.0.2-noarch-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:36 ./slackware64/x/bitmap-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 47404 2009-06-03 05:36 ./slackware64/x/bitmap-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:36 ./slackware64/x/bitmap-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:37 ./slackware64/x/compiz-0.7.8-x86_64-4.txt --rw-r--r-- 1 root root 410788 2009-06-03 05:37 ./slackware64/x/compiz-0.7.8-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-03 05:37 ./slackware64/x/compiz-0.7.8-x86_64-4.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:25 ./slackware64/x/compositeproto-0.4-noarch-2.txt --rw-r--r-- 1 root root 6828 2009-06-03 05:25 ./slackware64/x/compositeproto-0.4-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/compositeproto-0.4-noarch-2.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:25 ./slackware64/x/damageproto-1.1.0-noarch-2.txt --rw-r--r-- 1 root root 5240 2009-06-03 05:25 ./slackware64/x/damageproto-1.1.0-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/damageproto-1.1.0-noarch-2.txz.asc --rw-r--r-- 1 root root 536 2009-04-11 20:19 ./slackware64/x/dejavu-fonts-ttf-2.29-noarch-1.txt --rw-r--r-- 1 root root 2045904 2009-04-11 20:19 ./slackware64/x/dejavu-fonts-ttf-2.29-noarch-1.txz --rw-r--r-- 1 root root 197 2009-04-11 20:19 ./slackware64/x/dejavu-fonts-ttf-2.29-noarch-1.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:25 ./slackware64/x/dmxproto-2.2.2-noarch-2.txt --rw-r--r-- 1 root root 4132 2009-06-03 05:25 ./slackware64/x/dmxproto-2.2.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/dmxproto-2.2.2-noarch-2.txz.asc --rw-r--r-- 1 root root 309 2009-07-16 22:27 ./slackware64/x/dri2proto-2.1-x86_64-1.txt --rw-r--r-- 1 root root 2396 2009-07-16 22:27 ./slackware64/x/dri2proto-2.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:27 ./slackware64/x/dri2proto-2.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:38 ./slackware64/x/editres-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 34480 2009-06-03 05:38 ./slackware64/x/editres-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/editres-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:55 ./slackware64/x/encodings-1.0.2-noarch-2.txt --rw-r--r-- 1 root root 570668 2009-06-03 05:55 ./slackware64/x/encodings-1.0.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:55 ./slackware64/x/encodings-1.0.2-noarch-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:25 ./slackware64/x/evieext-1.0.2-noarch-2.txt --rw-r--r-- 1 root root 2328 2009-06-03 05:25 ./slackware64/x/evieext-1.0.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/evieext-1.0.2-noarch-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:25 ./slackware64/x/fixesproto-4.0-noarch-2.txt --rw-r--r-- 1 root root 3536 2009-06-03 05:25 ./slackware64/x/fixesproto-4.0-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/fixesproto-4.0-noarch-2.txz.asc --rw-r--r-- 1 root root 413 2009-06-03 05:56 ./slackware64/x/font-adobe-100dpi-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 6179928 2009-06-03 05:56 ./slackware64/x/font-adobe-100dpi-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:56 ./slackware64/x/font-adobe-100dpi-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:56 ./slackware64/x/font-adobe-75dpi-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 5467284 2009-06-03 05:56 ./slackware64/x/font-adobe-75dpi-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:56 ./slackware64/x/font-adobe-75dpi-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 504 2009-06-03 05:56 ./slackware64/x/font-adobe-utopia-100dpi-1.0.1-noarch-3.txt --rw-r--r-- 1 root root 1461380 2009-06-03 05:56 ./slackware64/x/font-adobe-utopia-100dpi-1.0.1-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:56 ./slackware64/x/font-adobe-utopia-100dpi-1.0.1-noarch-3.txz.asc --rw-r--r-- 1 root root 491 2009-06-03 05:57 ./slackware64/x/font-adobe-utopia-75dpi-1.0.1-noarch-3.txt --rw-r--r-- 1 root root 1214572 2009-06-03 05:57 ./slackware64/x/font-adobe-utopia-75dpi-1.0.1-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:57 ./slackware64/x/font-adobe-utopia-75dpi-1.0.1-noarch-3.txz.asc --rw-r--r-- 1 root root 491 2009-06-03 05:57 ./slackware64/x/font-adobe-utopia-type1-1.0.1-noarch-3.txt --rw-r--r-- 1 root root 166912 2009-06-03 05:57 ./slackware64/x/font-adobe-utopia-type1-1.0.1-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:57 ./slackware64/x/font-adobe-utopia-type1-1.0.1-noarch-3.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:57 ./slackware64/x/font-alias-1.0.1-noarch-2.txt --rw-r--r-- 1 root root 2656 2009-06-03 05:57 ./slackware64/x/font-alias-1.0.1-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:57 ./slackware64/x/font-alias-1.0.1-noarch-2.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:57 ./slackware64/x/font-arabic-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 14108 2009-06-03 05:57 ./slackware64/x/font-arabic-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:57 ./slackware64/x/font-arabic-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:57 ./slackware64/x/font-bh-100dpi-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 3778212 2009-06-03 05:57 ./slackware64/x/font-bh-100dpi-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:57 ./slackware64/x/font-bh-100dpi-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:57 ./slackware64/x/font-bh-75dpi-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 3243672 2009-06-03 05:57 ./slackware64/x/font-bh-75dpi-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:57 ./slackware64/x/font-bh-75dpi-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 595 2009-06-03 05:58 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 852164 2009-06-03 05:58 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 582 2009-06-03 05:58 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 743200 2009-06-03 05:58 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:58 ./slackware64/x/font-bh-ttf-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 276072 2009-06-03 05:58 ./slackware64/x/font-bh-ttf-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-bh-ttf-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:58 ./slackware64/x/font-bh-type1-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 529980 2009-06-03 05:58 ./slackware64/x/font-bh-type1-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-bh-type1-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 465 2009-06-03 05:58 ./slackware64/x/font-bitstream-100dpi-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 161336 2009-06-03 05:58 ./slackware64/x/font-bitstream-100dpi-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-bitstream-100dpi-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 452 2009-06-03 05:58 ./slackware64/x/font-bitstream-75dpi-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 141068 2009-06-03 05:58 ./slackware64/x/font-bitstream-75dpi-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-bitstream-75dpi-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 465 2009-06-03 05:58 ./slackware64/x/font-bitstream-speedo-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 239452 2009-06-03 05:58 ./slackware64/x/font-bitstream-speedo-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-bitstream-speedo-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 452 2009-06-03 05:58 ./slackware64/x/font-bitstream-type1-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 300696 2009-06-03 05:58 ./slackware64/x/font-bitstream-type1-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-bitstream-type1-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 452 2009-06-03 05:58 ./slackware64/x/font-cronyx-cyrillic-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 303200 2009-06-03 05:58 ./slackware64/x/font-cronyx-cyrillic-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-cronyx-cyrillic-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:58 ./slackware64/x/font-cursor-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 6200 2009-06-03 05:58 ./slackware64/x/font-cursor-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-cursor-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:58 ./slackware64/x/font-daewoo-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 661760 2009-06-03 05:58 ./slackware64/x/font-daewoo-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-daewoo-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:58 ./slackware64/x/font-dec-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 4284 2009-06-03 05:58 ./slackware64/x/font-dec-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-dec-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:58 ./slackware64/x/font-ibm-type1-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 279916 2009-06-03 05:58 ./slackware64/x/font-ibm-type1-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-ibm-type1-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:58 ./slackware64/x/font-isas-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 798336 2009-06-03 05:58 ./slackware64/x/font-isas-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-isas-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:58 ./slackware64/x/font-jis-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 537344 2009-06-03 05:58 ./slackware64/x/font-jis-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-jis-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 387 2009-06-03 05:58 ./slackware64/x/font-micro-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 2632 2009-06-03 05:58 ./slackware64/x/font-micro-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:58 ./slackware64/x/font-micro-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 426 2009-06-03 05:59 ./slackware64/x/font-misc-cyrillic-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 66932 2009-06-03 05:59 ./slackware64/x/font-misc-cyrillic-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-misc-cyrillic-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 426 2009-06-03 05:59 ./slackware64/x/font-misc-ethiopic-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 128860 2009-06-03 05:59 ./slackware64/x/font-misc-ethiopic-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-misc-ethiopic-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:59 ./slackware64/x/font-misc-meltho-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 737260 2009-06-03 05:59 ./slackware64/x/font-misc-meltho-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-misc-meltho-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:59 ./slackware64/x/font-misc-misc-1.0.0-noarch-4.txt --rw-r--r-- 1 root root 3479852 2009-06-03 05:59 ./slackware64/x/font-misc-misc-1.0.0-noarch-4.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-misc-misc-1.0.0-noarch-4.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:59 ./slackware64/x/font-mutt-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 209208 2009-06-03 05:59 ./slackware64/x/font-mutt-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-mutt-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 452 2009-06-03 05:59 ./slackware64/x/font-schumacher-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 154656 2009-06-03 05:59 ./slackware64/x/font-schumacher-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-schumacher-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 452 2009-06-03 05:59 ./slackware64/x/font-screen-cyrillic-1.0.1-noarch-3.txt --rw-r--r-- 1 root root 10136 2009-06-03 05:59 ./slackware64/x/font-screen-cyrillic-1.0.1-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-screen-cyrillic-1.0.1-noarch-3.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:59 ./slackware64/x/font-sony-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 20868 2009-06-03 05:59 ./slackware64/x/font-sony-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-sony-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:59 ./slackware64/x/font-sun-misc-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 26820 2009-06-03 05:59 ./slackware64/x/font-sun-misc-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-sun-misc-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:59 ./slackware64/x/font-util-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 22324 2009-06-03 05:59 ./slackware64/x/font-util-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-util-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 478 2009-06-03 05:59 ./slackware64/x/font-winitzki-cyrillic-1.0.0-noarch-3.txt --rw-r--r-- 1 root root 5784 2009-06-03 05:59 ./slackware64/x/font-winitzki-cyrillic-1.0.0-noarch-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-winitzki-cyrillic-1.0.0-noarch-3.txz.asc --rw-r--r-- 1 root root 426 2009-06-03 05:59 ./slackware64/x/font-xfree86-type1-1.0.1-noarch-2.txt --rw-r--r-- 1 root root 28372 2009-06-03 05:59 ./slackware64/x/font-xfree86-type1-1.0.1-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:59 ./slackware64/x/font-xfree86-type1-1.0.1-noarch-2.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:25 ./slackware64/x/fontcacheproto-0.1.2-noarch-2.txt --rw-r--r-- 1 root root 2676 2009-06-03 05:25 ./slackware64/x/fontcacheproto-0.1.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/fontcacheproto-0.1.2-noarch-2.txz.asc --rw-r--r-- 1 root root 348 2008-10-14 20:47 ./slackware64/x/fontconfig-2.6.0-x86_64-2.txt --rw-r--r-- 1 root root 240284 2008-10-14 20:47 ./slackware64/x/fontconfig-2.6.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-10-14 20:47 ./slackware64/x/fontconfig-2.6.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:25 ./slackware64/x/fontsproto-2.0.2-noarch-2.txt --rw-r--r-- 1 root root 9328 2009-06-03 05:25 ./slackware64/x/fontsproto-2.0.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/fontsproto-2.0.2-noarch-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:38 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txt --rw-r--r-- 1 root root 16584 2009-06-03 05:38 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:38 ./slackware64/x/fslsfonts-1.0.2-x86_64-1.txt --rw-r--r-- 1 root root 7476 2009-06-03 05:38 ./slackware64/x/fslsfonts-1.0.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/fslsfonts-1.0.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:38 ./slackware64/x/fstobdf-1.0.3-x86_64-1.txt --rw-r--r-- 1 root root 6916 2009-06-03 05:38 ./slackware64/x/fstobdf-1.0.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/fstobdf-1.0.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:26 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txt --rw-r--r-- 1 root root 3016 2009-06-03 05:26 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txz.asc --rw-r--r-- 1 root root 385 2009-08-04 00:34 ./slackware64/x/glew-1.5.1-x86_64-1.txt --rw-r--r-- 1 root root 221688 2009-08-04 00:34 ./slackware64/x/glew-1.5.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:34 ./slackware64/x/glew-1.5.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:25 ./slackware64/x/glproto-1.4.10-noarch-1.txt --rw-r--r-- 1 root root 17212 2009-06-03 05:25 ./slackware64/x/glproto-1.4.10-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/glproto-1.4.10-noarch-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:38 ./slackware64/x/iceauth-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 12140 2009-06-03 05:38 ./slackware64/x/iceauth-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/iceauth-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:38 ./slackware64/x/ico-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 12316 2009-06-03 05:38 ./slackware64/x/ico-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/ico-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:26 ./slackware64/x/imake-1.0.2-x86_64-3.txt --rw-r--r-- 1 root root 27928 2009-06-03 05:26 ./slackware64/x/imake-1.0.2-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/imake-1.0.2-x86_64-3.txz.asc --rw-r--r-- 1 root root 322 2009-07-16 22:27 ./slackware64/x/inputproto-1.5.1-noarch-1.txt --rw-r--r-- 1 root root 12456 2009-07-16 22:27 ./slackware64/x/inputproto-1.5.1-noarch-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:27 ./slackware64/x/inputproto-1.5.1-noarch-1.txz.asc --rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/x/install-packages --rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/x/install.end --rw-r--r-- 1 root root 420 2009-06-03 05:38 ./slackware64/x/intel-gpu-tools-1.0.1-x86_64-1.txt --rw-r--r-- 1 root root 29568 2009-06-03 05:38 ./slackware64/x/intel-gpu-tools-1.0.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/intel-gpu-tools-1.0.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:25 ./slackware64/x/kbproto-1.0.3-noarch-2.txt --rw-r--r-- 1 root root 22192 2009-06-03 05:25 ./slackware64/x/kbproto-1.0.3-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/kbproto-1.0.3-noarch-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:38 ./slackware64/x/lbxproxy-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 72016 2009-06-03 05:38 ./slackware64/x/lbxproxy-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/lbxproxy-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-07-16 22:27 ./slackware64/x/libFS-1.0.2-x86_64-1.txt --rw-r--r-- 1 root root 23296 2009-07-16 22:27 ./slackware64/x/libFS-1.0.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:27 ./slackware64/x/libFS-1.0.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 270 2009-08-04 00:34 ./slackware64/x/libICE-1.0.5-x86_64-2.txt --rw-r--r-- 1 root root 42520 2009-08-04 00:34 ./slackware64/x/libICE-1.0.5-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-04 00:34 ./slackware64/x/libICE-1.0.5-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:28 ./slackware64/x/libSM-1.1.0-x86_64-1.txt --rw-r--r-- 1 root root 18640 2009-06-03 05:28 ./slackware64/x/libSM-1.1.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:28 ./slackware64/x/libSM-1.1.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 270 2009-08-04 00:35 ./slackware64/x/libX11-1.2.2-x86_64-1.txt --rw-r--r-- 1 root root 1599136 2009-08-04 00:35 ./slackware64/x/libX11-1.2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/libX11-1.2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:29 ./slackware64/x/libXScrnSaver-1.1.3-x86_64-2.txt --rw-r--r-- 1 root root 10652 2009-06-03 05:29 ./slackware64/x/libXScrnSaver-1.1.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:29 ./slackware64/x/libXScrnSaver-1.1.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:30 ./slackware64/x/libXTrap-1.0.0-x86_64-2.txt --rw-r--r-- 1 root root 13612 2009-06-03 05:30 ./slackware64/x/libXTrap-1.0.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:30 ./slackware64/x/libXTrap-1.0.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:30 ./slackware64/x/libXau-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 9044 2009-06-03 05:30 ./slackware64/x/libXau-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:30 ./slackware64/x/libXau-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-07-16 22:28 ./slackware64/x/libXaw-1.0.6-x86_64-1.txt --rw-r--r-- 1 root root 247384 2009-07-16 22:28 ./slackware64/x/libXaw-1.0.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:28 ./slackware64/x/libXaw-1.0.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:30 ./slackware64/x/libXcomposite-0.4.0-x86_64-2.txt --rw-r--r-- 1 root root 9024 2009-06-03 05:30 ./slackware64/x/libXcomposite-0.4.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:30 ./slackware64/x/libXcomposite-0.4.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:31 ./slackware64/x/libXcursor-1.1.9-x86_64-2.txt --rw-r--r-- 1 root root 25596 2009-06-03 05:31 ./slackware64/x/libXcursor-1.1.9-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:31 ./slackware64/x/libXcursor-1.1.9-x86_64-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:31 ./slackware64/x/libXdamage-1.1.1-x86_64-2.txt --rw-r--r-- 1 root root 5400 2009-06-03 05:31 ./slackware64/x/libXdamage-1.1.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:31 ./slackware64/x/libXdamage-1.1.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:31 ./slackware64/x/libXdmcp-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 9884 2009-06-03 05:31 ./slackware64/x/libXdmcp-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:31 ./slackware64/x/libXdmcp-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:31 ./slackware64/x/libXevie-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 5852 2009-06-03 05:31 ./slackware64/x/libXevie-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:31 ./slackware64/x/libXevie-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:31 ./slackware64/x/libXext-1.0.5-x86_64-1.txt --rw-r--r-- 1 root root 71068 2009-06-03 05:31 ./slackware64/x/libXext-1.0.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:31 ./slackware64/x/libXext-1.0.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:31 ./slackware64/x/libXfixes-4.0.3-x86_64-2.txt --rw-r--r-- 1 root root 10712 2009-06-03 05:31 ./slackware64/x/libXfixes-4.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:31 ./slackware64/x/libXfixes-4.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:32 ./slackware64/x/libXfont-1.4.0-x86_64-1.txt --rw-r--r-- 1 root root 117940 2009-06-03 05:32 ./slackware64/x/libXfont-1.4.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:32 ./slackware64/x/libXfont-1.4.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:32 ./slackware64/x/libXfontcache-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 5636 2009-06-03 05:32 ./slackware64/x/libXfontcache-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:32 ./slackware64/x/libXfontcache-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:32 ./slackware64/x/libXft-2.1.13-x86_64-2.txt --rw-r--r-- 1 root root 45100 2009-06-03 05:32 ./slackware64/x/libXft-2.1.13-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:32 ./slackware64/x/libXft-2.1.13-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:32 ./slackware64/x/libXi-1.2.1-x86_64-1.txt --rw-r--r-- 1 root root 60916 2009-06-03 05:32 ./slackware64/x/libXi-1.2.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:32 ./slackware64/x/libXi-1.2.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:32 ./slackware64/x/libXinerama-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 6396 2009-06-03 05:32 ./slackware64/x/libXinerama-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:32 ./slackware64/x/libXinerama-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:32 ./slackware64/x/libXmu-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 53032 2009-06-03 05:32 ./slackware64/x/libXmu-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:32 ./slackware64/x/libXmu-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:33 ./slackware64/x/libXp-1.0.0-x86_64-2.txt --rw-r--r-- 1 root root 77220 2009-06-03 05:33 ./slackware64/x/libXp-1.0.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXp-1.0.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:33 ./slackware64/x/libXpm-3.5.7-x86_64-2.txt --rw-r--r-- 1 root root 46672 2009-06-03 05:33 ./slackware64/x/libXpm-3.5.7-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXpm-3.5.7-x86_64-2.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:33 ./slackware64/x/libXprintAppUtil-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 7672 2009-06-03 05:33 ./slackware64/x/libXprintAppUtil-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXprintAppUtil-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:33 ./slackware64/x/libXprintUtil-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 15644 2009-06-03 05:33 ./slackware64/x/libXprintUtil-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXprintUtil-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:33 ./slackware64/x/libXrandr-1.3.0-x86_64-1.txt --rw-r--r-- 1 root root 20872 2009-06-03 05:33 ./slackware64/x/libXrandr-1.3.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXrandr-1.3.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:33 ./slackware64/x/libXrender-0.9.4-x86_64-2.txt --rw-r--r-- 1 root root 17612 2009-06-03 05:33 ./slackware64/x/libXrender-0.9.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXrender-0.9.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:33 ./slackware64/x/libXres-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 6436 2009-06-03 05:33 ./slackware64/x/libXres-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXres-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-07-16 22:28 ./slackware64/x/libXt-1.0.6-x86_64-1.txt --rw-r--r-- 1 root root 418692 2009-07-16 22:28 ./slackware64/x/libXt-1.0.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:28 ./slackware64/x/libXt-1.0.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:34 ./slackware64/x/libXtst-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 12320 2009-06-03 05:34 ./slackware64/x/libXtst-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:34 ./slackware64/x/libXtst-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:34 ./slackware64/x/libXv-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 26028 2009-06-03 05:34 ./slackware64/x/libXv-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:34 ./slackware64/x/libXv-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:34 ./slackware64/x/libXvMC-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 11224 2009-06-03 05:34 ./slackware64/x/libXvMC-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:34 ./slackware64/x/libXvMC-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:35 ./slackware64/x/libXxf86dga-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 14092 2009-06-03 05:35 ./slackware64/x/libXxf86dga-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:35 ./slackware64/x/libXxf86dga-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 348 2009-06-03 05:35 ./slackware64/x/libXxf86misc-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 7904 2009-06-03 05:35 ./slackware64/x/libXxf86misc-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:35 ./slackware64/x/libXxf86misc-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:35 ./slackware64/x/libXxf86vm-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 11748 2009-06-03 05:35 ./slackware64/x/libXxf86vm-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:35 ./slackware64/x/libXxf86vm-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:35 ./slackware64/x/libdmx-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 30944 2009-06-03 05:35 ./slackware64/x/libdmx-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:35 ./slackware64/x/libdmx-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 260 2009-08-04 00:30 ./slackware64/x/libdrm-2.4.12-x86_64-1.txt --rw-r--r-- 1 root root 89912 2009-08-04 00:30 ./slackware64/x/libdrm-2.4.12-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:30 ./slackware64/x/libdrm-2.4.12-x86_64-1.txz.asc --rw-r--r-- 1 root root 581 2008-11-06 15:32 ./slackware64/x/liberation-fonts-ttf-1.04-noarch-1.txt --rw-r--r-- 1 root root 683360 2008-11-06 15:32 ./slackware64/x/liberation-fonts-ttf-1.04-noarch-1.txz --rw-r--r-- 1 root root 197 2008-11-06 15:32 ./slackware64/x/liberation-fonts-ttf-1.04-noarch-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:35 ./slackware64/x/libfontenc-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 12980 2009-06-03 05:35 ./slackware64/x/libfontenc-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:35 ./slackware64/x/libfontenc-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 381 2008-11-05 14:32 ./slackware64/x/libhangul-0.0.7-x86_64-1.txt --rw-r--r-- 1 root root 1857876 2008-11-05 14:32 ./slackware64/x/libhangul-0.0.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-05 14:32 ./slackware64/x/libhangul-0.0.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:35 ./slackware64/x/liblbxutil-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 14760 2009-06-03 05:35 ./slackware64/x/liblbxutil-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:35 ./slackware64/x/liblbxutil-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 348 2009-06-03 05:35 ./slackware64/x/libpciaccess-0.10.6-x86_64-1.txt --rw-r--r-- 1 root root 13408 2009-06-03 05:35 ./slackware64/x/libpciaccess-0.10.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:35 ./slackware64/x/libpciaccess-0.10.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:35 ./slackware64/x/libpthread-stubs-0.1-noarch-2.txt --rw-r--r-- 1 root root 1844 2009-06-03 05:35 ./slackware64/x/libpthread-stubs-0.1-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:35 ./slackware64/x/libpthread-stubs-0.1-noarch-2.txz.asc --rw-r--r-- 1 root root 446 2009-06-03 05:27 ./slackware64/x/libxcb-1.3-x86_64-1.txt --rw-r--r-- 1 root root 217132 2009-06-03 05:27 ./slackware64/x/libxcb-1.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:27 ./slackware64/x/libxcb-1.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:36 ./slackware64/x/libxkbfile-1.0.5-x86_64-2.txt --rw-r--r-- 1 root root 64492 2009-06-03 05:36 ./slackware64/x/libxkbfile-1.0.5-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:36 ./slackware64/x/libxkbfile-1.0.5-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:36 ./slackware64/x/libxkbui-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 8080 2009-06-03 05:36 ./slackware64/x/libxkbui-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:36 ./slackware64/x/libxkbui-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:38 ./slackware64/x/listres-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 6272 2009-06-03 05:38 ./slackware64/x/listres-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/listres-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:26 ./slackware64/x/lndir-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 6580 2009-06-03 05:26 ./slackware64/x/lndir-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/lndir-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 244 2009-06-03 05:38 ./slackware64/x/luit-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 18164 2009-06-03 05:38 ./slackware64/x/luit-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/luit-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 416 2009-04-20 14:11 ./slackware64/x/m17n-lib-1.5.4-x86_64-1.txt --rw-r--r-- 1 root root 2163616 2009-04-20 14:11 ./slackware64/x/m17n-lib-1.5.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-20 14:11 ./slackware64/x/m17n-lib-1.5.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:26 ./slackware64/x/makedepend-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 17904 2009-06-03 05:26 ./slackware64/x/makedepend-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/makedepend-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 24094 2009-08-04 17:39 ./slackware64/x/maketag --rw-r--r-- 1 root root 24094 2009-08-04 17:39 ./slackware64/x/maketag.ez --rw-r--r-- 1 root root 335 2009-08-04 00:32 ./slackware64/x/mesa-7.5-x86_64-1.txt --rw-r--r-- 1 root root 4099312 2009-08-04 00:32 ./slackware64/x/mesa-7.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:32 ./slackware64/x/mesa-7.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:38 ./slackware64/x/mkcomposecache-1.2-x86_64-2.txt --rw-r--r-- 1 root root 3800 2009-06-03 05:38 ./slackware64/x/mkcomposecache-1.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/mkcomposecache-1.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:38 ./slackware64/x/mkfontdir-1.0.4-noarch-2.txt --rw-r--r-- 1 root root 4136 2009-06-03 05:38 ./slackware64/x/mkfontdir-1.0.4-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/mkfontdir-1.0.4-noarch-2.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:38 ./slackware64/x/mkfontscale-1.0.6-x86_64-1.txt --rw-r--r-- 1 root root 14996 2009-06-03 05:38 ./slackware64/x/mkfontscale-1.0.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/mkfontscale-1.0.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:38 ./slackware64/x/oclock-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 9056 2009-06-03 05:38 ./slackware64/x/oclock-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/oclock-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 337 2009-08-04 00:35 ./slackware64/x/pixman-0.15.18-x86_64-1.txt --rw-r--r-- 1 root root 123344 2009-08-04 00:35 ./slackware64/x/pixman-0.15.18-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/pixman-0.15.18-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:25 ./slackware64/x/printproto-1.0.4-noarch-2.txt --rw-r--r-- 1 root root 8176 2009-06-03 05:25 ./slackware64/x/printproto-1.0.4-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/printproto-1.0.4-noarch-2.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:38 ./slackware64/x/proxymngr-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 15644 2009-06-03 05:38 ./slackware64/x/proxymngr-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/proxymngr-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:25 ./slackware64/x/randrproto-1.3.0-noarch-1.txt --rw-r--r-- 1 root root 23408 2009-06-03 05:25 ./slackware64/x/randrproto-1.3.0-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/randrproto-1.3.0-noarch-1.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:25 ./slackware64/x/recordproto-1.13.2-noarch-2.txt --rw-r--r-- 1 root root 3956 2009-06-03 05:25 ./slackware64/x/recordproto-1.13.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/recordproto-1.13.2-noarch-2.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:38 ./slackware64/x/rendercheck-1.3-x86_64-2.txt --rw-r--r-- 1 root root 18748 2009-06-03 05:38 ./slackware64/x/rendercheck-1.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/rendercheck-1.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 335 2009-08-04 00:35 ./slackware64/x/renderproto-0.11-noarch-1.txt --rw-r--r-- 1 root root 15320 2009-08-04 00:35 ./slackware64/x/renderproto-0.11-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/renderproto-0.11-noarch-1.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:25 ./slackware64/x/resourceproto-1.0.2-noarch-2.txt --rw-r--r-- 1 root root 1448 2009-06-03 05:25 ./slackware64/x/resourceproto-1.0.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/resourceproto-1.0.2-noarch-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:39 ./slackware64/x/rgb-1.0.3-x86_64-1.txt --rw-r--r-- 1 root root 7676 2009-06-03 05:39 ./slackware64/x/rgb-1.0.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/rgb-1.0.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 270 2009-08-04 00:52 ./slackware64/x/rstart-1.0.3-x86_64-1.txt --rw-r--r-- 1 root root 16596 2009-08-04 00:52 ./slackware64/x/rstart-1.0.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:52 ./slackware64/x/rstart-1.0.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 403 2008-11-06 16:24 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txt --rw-r--r-- 1 root root 5974804 2008-11-06 16:24 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txz --rw-r--r-- 1 root root 197 2008-11-06 16:24 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txz.asc --rw-r--r-- 1 root root 330 2009-06-09 00:28 ./slackware64/x/scim-1.4.9-x86_64-4.txt --rw-r--r-- 1 root root 1055072 2009-06-09 00:28 ./slackware64/x/scim-1.4.9-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-09 00:28 ./slackware64/x/scim-1.4.9-x86_64-4.txz.asc --rw-r--r-- 1 root root 508 2009-06-10 01:43 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txt --rw-r--r-- 1 root root 250080 2009-06-10 01:43 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-10 01:43 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 505 2009-06-10 01:46 ./slackware64/x/scim-bridge-0.4.16-x86_64-4.txt --rw-r--r-- 1 root root 115348 2009-06-10 01:46 ./slackware64/x/scim-bridge-0.4.16-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-10 01:46 ./slackware64/x/scim-bridge-0.4.16-x86_64-4.txz.asc --rw-r--r-- 1 root root 611 2009-06-10 01:52 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txt --rw-r--r-- 1 root root 44956 2009-06-10 01:52 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-10 01:52 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 356 2009-06-10 01:53 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txt --rw-r--r-- 1 root root 69624 2009-06-10 01:53 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-10 01:53 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txz.asc --rw-r--r-- 1 root root 402 2009-04-20 14:18 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txt --rw-r--r-- 1 root root 32356 2009-04-20 14:18 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-04-20 14:18 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 386 2009-06-10 01:55 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txt --rw-r--r-- 1 root root 1670432 2009-06-10 01:55 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-10 01:55 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txz.asc --rw-r--r-- 1 root root 289 2009-06-10 01:56 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txt --rw-r--r-- 1 root root 3977628 2009-06-10 01:56 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-10 01:56 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:39 ./slackware64/x/scripts-1.0.1-noarch-2.txt --rw-r--r-- 1 root root 6628 2009-06-03 05:39 ./slackware64/x/scripts-1.0.1-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/scripts-1.0.1-noarch-2.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:25 ./slackware64/x/scrnsaverproto-1.1.0-noarch-2.txt --rw-r--r-- 1 root root 3344 2009-06-03 05:25 ./slackware64/x/scrnsaverproto-1.1.0-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/scrnsaverproto-1.1.0-noarch-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:39 ./slackware64/x/sessreg-1.0.4-x86_64-1.txt --rw-r--r-- 1 root root 6516 2009-06-03 05:39 ./slackware64/x/sessreg-1.0.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/sessreg-1.0.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 309 2009-08-04 00:35 ./slackware64/x/setxkbmap-1.1.0-x86_64-1.txt --rw-r--r-- 1 root root 10400 2009-08-04 00:35 ./slackware64/x/setxkbmap-1.1.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/setxkbmap-1.1.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:39 ./slackware64/x/showfont-1.0.2-x86_64-1.txt --rw-r--r-- 1 root root 6660 2009-06-03 05:39 ./slackware64/x/showfont-1.0.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/showfont-1.0.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 473 2008-11-06 18:22 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txt --rw-r--r-- 1 root root 67728 2008-11-06 18:22 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txz --rw-r--r-- 1 root root 197 2008-11-06 18:22 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:39 ./slackware64/x/smproxy-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 10800 2009-06-03 05:39 ./slackware64/x/smproxy-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/smproxy-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 4874 2009-08-04 17:39 ./slackware64/x/tagfile --rw-r--r-- 1 root root 561 2008-11-06 18:23 ./slackware64/x/tibmachuni-font-ttf-1.901-noarch-1.txt --rw-r--r-- 1 root root 860064 2008-11-06 18:23 ./slackware64/x/tibmachuni-font-ttf-1.901-noarch-1.txz --rw-r--r-- 1 root root 197 2008-11-06 18:23 ./slackware64/x/tibmachuni-font-ttf-1.901-noarch-1.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:25 ./slackware64/x/trapproto-3.4.3-noarch-2.txt --rw-r--r-- 1 root root 12824 2009-06-03 05:25 ./slackware64/x/trapproto-3.4.3-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/trapproto-3.4.3-noarch-2.txz.asc --rw-r--r-- 1 root root 621 2008-11-06 18:24 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txt --rw-r--r-- 1 root root 2183528 2008-11-06 18:24 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txz --rw-r--r-- 1 root root 197 2008-11-06 18:24 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:39 ./slackware64/x/twm-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 93544 2009-06-03 05:39 ./slackware64/x/twm-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/twm-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 335 2009-07-16 22:27 ./slackware64/x/util-macros-1.2.2-noarch-1.txt --rw-r--r-- 1 root root 5852 2009-07-16 22:27 ./slackware64/x/util-macros-1.2.2-noarch-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:27 ./slackware64/x/util-macros-1.2.2-noarch-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:25 ./slackware64/x/videoproto-2.2.2-noarch-2.txt --rw-r--r-- 1 root root 6984 2009-06-03 05:25 ./slackware64/x/videoproto-2.2.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/videoproto-2.2.2-noarch-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:39 ./slackware64/x/viewres-1.0.1-x86_64-3.txt --rw-r--r-- 1 root root 12932 2009-06-03 05:39 ./slackware64/x/viewres-1.0.1-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/viewres-1.0.1-x86_64-3.txz.asc --rw-r--r-- 1 root root 686 2009-04-20 19:13 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txt --rw-r--r-- 1 root root 5752036 2009-04-20 19:13 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz --rw-r--r-- 1 root root 197 2009-04-20 19:13 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz.asc --rw-r--r-- 1 root root 607 2009-06-08 20:29 ./slackware64/x/x11-skel-7.4-x86_64-1.txt --rw-r--r-- 1 root root 12176 2009-06-08 20:29 ./slackware64/x/x11-skel-7.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-08 20:29 ./slackware64/x/x11-skel-7.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:39 ./slackware64/x/x11perf-1.5-x86_64-2.txt --rw-r--r-- 1 root root 55076 2009-06-03 05:39 ./slackware64/x/x11perf-1.5-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/x11perf-1.5-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:39 ./slackware64/x/xauth-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 19740 2009-06-03 05:39 ./slackware64/x/xauth-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/xauth-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 519 2008-11-04 22:19 ./slackware64/x/xaw3d-1.5E-x86_64-1.txt --rw-r--r-- 1 root root 166100 2008-11-04 22:19 ./slackware64/x/xaw3d-1.5E-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-04 22:19 ./slackware64/x/xaw3d-1.5E-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:39 ./slackware64/x/xbacklight-1.1-x86_64-2.txt --rw-r--r-- 1 root root 5360 2009-06-03 05:39 ./slackware64/x/xbacklight-1.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/xbacklight-1.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:39 ./slackware64/x/xbiff-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 9536 2009-06-03 05:39 ./slackware64/x/xbiff-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/xbiff-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:26 ./slackware64/x/xbitmaps-1.0.1-noarch-2.txt --rw-r--r-- 1 root root 18084 2009-06-03 05:26 ./slackware64/x/xbitmaps-1.0.1-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/xbitmaps-1.0.1-noarch-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:39 ./slackware64/x/xcalc-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 20380 2009-06-03 05:39 ./slackware64/x/xcalc-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/xcalc-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:27 ./slackware64/x/xcb-proto-1.5-noarch-1.txt --rw-r--r-- 1 root root 45456 2009-06-03 05:27 ./slackware64/x/xcb-proto-1.5-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:27 ./slackware64/x/xcb-proto-1.5-noarch-1.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:27 ./slackware64/x/xcb-util-0.3.5-x86_64-1.txt --rw-r--r-- 1 root root 44636 2009-06-03 05:27 ./slackware64/x/xcb-util-0.3.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:27 ./slackware64/x/xcb-util-0.3.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:39 ./slackware64/x/xclipboard-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 14112 2009-06-03 05:39 ./slackware64/x/xclipboard-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/xclipboard-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:39 ./slackware64/x/xclock-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 20296 2009-06-03 05:39 ./slackware64/x/xclock-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/xclock-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:25 ./slackware64/x/xcmiscproto-1.1.2-noarch-2.txt --rw-r--r-- 1 root root 1928 2009-06-03 05:25 ./slackware64/x/xcmiscproto-1.1.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xcmiscproto-1.1.2-noarch-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:39 ./slackware64/x/xcmsdb-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 13724 2009-06-03 05:39 ./slackware64/x/xcmsdb-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/xcmsdb-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:39 ./slackware64/x/xcompmgr-1.1.4-x86_64-2.txt --rw-r--r-- 1 root root 15212 2009-06-03 05:39 ./slackware64/x/xcompmgr-1.1.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/xcompmgr-1.1.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:40 ./slackware64/x/xconsole-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 8736 2009-06-03 05:40 ./slackware64/x/xconsole-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xconsole-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:26 ./slackware64/x/xcursor-themes-1.0.1-noarch-2.txt --rw-r--r-- 1 root root 293464 2009-06-03 05:26 ./slackware64/x/xcursor-themes-1.0.1-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/xcursor-themes-1.0.1-noarch-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:40 ./slackware64/x/xcursorgen-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 6632 2009-06-03 05:40 ./slackware64/x/xcursorgen-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xcursorgen-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:40 ./slackware64/x/xdbedizzy-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 8492 2009-06-03 05:40 ./slackware64/x/xdbedizzy-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xdbedizzy-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 550 2009-02-03 19:45 ./slackware64/x/xdg-utils-1.0.2-noarch-3.txt --rw-r--r-- 1 root root 42388 2009-02-03 19:45 ./slackware64/x/xdg-utils-1.0.2-noarch-3.txz --rw-r--r-- 1 root root 197 2009-02-03 19:45 ./slackware64/x/xdg-utils-1.0.2-noarch-3.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:40 ./slackware64/x/xditview-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 21056 2009-06-03 05:40 ./slackware64/x/xditview-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xditview-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:40 ./slackware64/x/xdm-1.1.8-x86_64-1.txt --rw-r--r-- 1 root root 97808 2009-06-03 05:40 ./slackware64/x/xdm-1.1.8-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xdm-1.1.8-x86_64-1.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:40 ./slackware64/x/xdpyinfo-1.0.3-x86_64-1.txt --rw-r--r-- 1 root root 15544 2009-06-03 05:40 ./slackware64/x/xdpyinfo-1.0.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xdpyinfo-1.0.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:40 ./slackware64/x/xdriinfo-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 3892 2009-06-03 05:40 ./slackware64/x/xdriinfo-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xdriinfo-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:40 ./slackware64/x/xedit-1.1.2-x86_64-1.txt --rw-r--r-- 1 root root 282684 2009-06-03 05:40 ./slackware64/x/xedit-1.1.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xedit-1.1.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:40 ./slackware64/x/xev-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 10480 2009-06-03 05:40 ./slackware64/x/xev-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xev-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:25 ./slackware64/x/xextproto-7.0.5-noarch-1.txt --rw-r--r-- 1 root root 31640 2009-06-03 05:25 ./slackware64/x/xextproto-7.0.5-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xextproto-7.0.5-noarch-1.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:40 ./slackware64/x/xeyes-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 7188 2009-06-03 05:40 ./slackware64/x/xeyes-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xeyes-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 413 2009-06-03 05:44 ./slackware64/x/xf86-input-acecad-1.3.0-x86_64-1.txt --rw-r--r-- 1 root root 9472 2009-06-03 05:44 ./slackware64/x/xf86-input-acecad-1.3.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:44 ./slackware64/x/xf86-input-acecad-1.3.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 413 2009-06-03 05:44 ./slackware64/x/xf86-input-aiptek-1.2.0-x86_64-1.txt --rw-r--r-- 1 root root 13680 2009-06-03 05:44 ./slackware64/x/xf86-input-aiptek-1.2.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:44 ./slackware64/x/xf86-input-aiptek-1.2.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 413 2009-06-03 05:44 ./slackware64/x/xf86-input-citron-2.2.2-x86_64-1.txt --rw-r--r-- 1 root root 23828 2009-06-03 05:44 ./slackware64/x/xf86-input-citron-2.2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:44 ./slackware64/x/xf86-input-citron-2.2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 478 2009-06-03 05:45 ./slackware64/x/xf86-input-elographics-1.2.3-x86_64-2.txt --rw-r--r-- 1 root root 9236 2009-06-03 05:45 ./slackware64/x/xf86-input-elographics-1.2.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:45 ./slackware64/x/xf86-input-elographics-1.2.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 400 2009-08-21 03:15 ./slackware64/x/xf86-input-evdev-2.2.5-x86_64-1.txt --rw-r--r-- 1 root root 18612 2009-08-21 03:15 ./slackware64/x/xf86-input-evdev-2.2.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-21 03:15 ./slackware64/x/xf86-input-evdev-2.2.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 387 2009-06-03 05:45 ./slackware64/x/xf86-input-fpit-1.3.0-x86_64-1.txt --rw-r--r-- 1 root root 7800 2009-06-03 05:45 ./slackware64/x/xf86-input-fpit-1.3.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:45 ./slackware64/x/xf86-input-fpit-1.3.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 439 2009-06-03 05:45 ./slackware64/x/xf86-input-hyperpen-1.3.0-x86_64-1.txt --rw-r--r-- 1 root root 8452 2009-06-03 05:45 ./slackware64/x/xf86-input-hyperpen-1.3.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:45 ./slackware64/x/xf86-input-hyperpen-1.3.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 439 2009-06-03 05:45 ./slackware64/x/xf86-input-joystick-1.4.0-x86_64-1.txt --rw-r--r-- 1 root root 38372 2009-06-03 05:45 ./slackware64/x/xf86-input-joystick-1.4.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:45 ./slackware64/x/xf86-input-joystick-1.4.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 439 2009-06-03 05:46 ./slackware64/x/xf86-input-keyboard-1.3.2-x86_64-1.txt --rw-r--r-- 1 root root 12080 2009-06-03 05:46 ./slackware64/x/xf86-input-keyboard-1.3.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:46 ./slackware64/x/xf86-input-keyboard-1.3.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:46 ./slackware64/x/xf86-input-mouse-1.4.0-x86_64-1.txt --rw-r--r-- 1 root root 24608 2009-06-03 05:46 ./slackware64/x/xf86-input-mouse-1.4.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:46 ./slackware64/x/xf86-input-mouse-1.4.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 426 2009-06-03 05:46 ./slackware64/x/xf86-input-mutouch-1.2.1-x86_64-2.txt --rw-r--r-- 1 root root 9072 2009-06-03 05:46 ./slackware64/x/xf86-input-mutouch-1.2.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:46 ./slackware64/x/xf86-input-mutouch-1.2.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 439 2009-06-03 05:46 ./slackware64/x/xf86-input-penmount-1.4.0-x86_64-1.txt --rw-r--r-- 1 root root 7344 2009-06-03 05:46 ./slackware64/x/xf86-input-penmount-1.4.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:46 ./slackware64/x/xf86-input-penmount-1.4.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 452 2009-08-04 00:35 ./slackware64/x/xf86-input-synaptics-1.1.3-x86_64-1.txt --rw-r--r-- 1 root root 53688 2009-08-04 00:35 ./slackware64/x/xf86-input-synaptics-1.1.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/xf86-input-synaptics-1.1.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 426 2009-06-03 05:47 ./slackware64/x/xf86-input-vmmouse-12.6.4-x86_64-1.txt --rw-r--r-- 1 root root 11292 2009-06-03 05:47 ./slackware64/x/xf86-input-vmmouse-12.6.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:47 ./slackware64/x/xf86-input-vmmouse-12.6.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 387 2009-06-03 05:47 ./slackware64/x/xf86-input-void-1.2.0-x86_64-1.txt --rw-r--r-- 1 root root 4108 2009-06-03 05:47 ./slackware64/x/xf86-input-void-1.2.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:47 ./slackware64/x/xf86-input-void-1.2.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-08-04 00:35 ./slackware64/x/xf86-video-apm-1.2.2-x86_64-1.txt --rw-r--r-- 1 root root 50348 2009-08-04 00:35 ./slackware64/x/xf86-video-apm-1.2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/xf86-video-apm-1.2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:47 ./slackware64/x/xf86-video-ark-0.7.1-x86_64-1.txt --rw-r--r-- 1 root root 9412 2009-06-03 05:47 ./slackware64/x/xf86-video-ark-0.7.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:47 ./slackware64/x/xf86-video-ark-0.7.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-08-04 00:35 ./slackware64/x/xf86-video-ast-0.89.9-x86_64-1.txt --rw-r--r-- 1 root root 21168 2009-08-04 00:35 ./slackware64/x/xf86-video-ast-0.89.9-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/xf86-video-ast-0.89.9-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-07-16 22:31 ./slackware64/x/xf86-video-ati-6.12.2-x86_64-2.txt --rw-r--r-- 1 root root 235436 2009-07-16 22:31 ./slackware64/x/xf86-video-ati-6.12.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-07-16 22:31 ./slackware64/x/xf86-video-ati-6.12.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:48 ./slackware64/x/xf86-video-chips-1.2.1-x86_64-1.txt --rw-r--r-- 1 root root 58656 2009-06-03 05:48 ./slackware64/x/xf86-video-chips-1.2.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:48 ./slackware64/x/xf86-video-chips-1.2.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 413 2009-08-04 00:36 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-1.txt --rw-r--r-- 1 root root 28780 2009-08-04 00:36 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:36 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-07-16 22:31 ./slackware64/x/xf86-video-dummy-0.3.2-x86_64-1.txt --rw-r--r-- 1 root root 7004 2009-07-16 22:31 ./slackware64/x/xf86-video-dummy-0.3.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:31 ./slackware64/x/xf86-video-dummy-0.3.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-08-04 00:36 ./slackware64/x/xf86-video-glint-1.2.4-x86_64-1.txt --rw-r--r-- 1 root root 77132 2009-08-04 00:36 ./slackware64/x/xf86-video-glint-1.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:36 ./slackware64/x/xf86-video-glint-1.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 387 2009-08-04 00:36 ./slackware64/x/xf86-video-i128-1.3.3-x86_64-1.txt --rw-r--r-- 1 root root 22124 2009-08-04 00:36 ./slackware64/x/xf86-video-i128-1.3.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:36 ./slackware64/x/xf86-video-i128-1.3.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 387 2009-08-04 00:36 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-1.txt --rw-r--r-- 1 root root 20844 2009-08-04 00:36 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:36 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-08-04 00:37 ./slackware64/x/xf86-video-intel-2.8.0-x86_64-1.txt --rw-r--r-- 1 root root 239016 2009-08-04 00:37 ./slackware64/x/xf86-video-intel-2.8.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:37 ./slackware64/x/xf86-video-intel-2.8.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 413 2009-08-04 00:37 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-1.txt --rw-r--r-- 1 root root 70800 2009-08-04 00:37 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:37 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-08-04 00:37 ./slackware64/x/xf86-video-mga-1.4.11-x86_64-1.txt --rw-r--r-- 1 root root 74336 2009-08-04 00:37 ./slackware64/x/xf86-video-mga-1.4.11-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:37 ./slackware64/x/xf86-video-mga-1.4.11-x86_64-1.txz.asc --rw-r--r-- 1 root root 439 2009-08-04 00:37 ./slackware64/x/xf86-video-neomagic-1.2.4-x86_64-1.txt --rw-r--r-- 1 root root 29836 2009-08-04 00:37 ./slackware64/x/xf86-video-neomagic-1.2.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:37 ./slackware64/x/xf86-video-neomagic-1.2.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 426 2009-06-03 05:51 ./slackware64/x/xf86-video-newport-0.2.2-x86_64-1.txt --rw-r--r-- 1 root root 15988 2009-06-03 05:51 ./slackware64/x/xf86-video-newport-0.2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:51 ./slackware64/x/xf86-video-newport-0.2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 361 2009-07-16 22:34 ./slackware64/x/xf86-video-nv-2.1.14-x86_64-1.txt --rw-r--r-- 1 root root 70340 2009-07-16 22:34 ./slackware64/x/xf86-video-nv-2.1.14-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:34 ./slackware64/x/xf86-video-nv-2.1.14-x86_64-1.txz.asc --rw-r--r-- 1 root root 465 2009-06-03 05:52 ./slackware64/x/xf86-video-openchrome-0.2.903-x86_64-2.txt --rw-r--r-- 1 root root 120584 2009-06-03 05:52 ./slackware64/x/xf86-video-openchrome-0.2.903-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:52 ./slackware64/x/xf86-video-openchrome-0.2.903-x86_64-2.txz.asc --rw-r--r-- 1 root root 387 2009-08-04 00:37 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-1.txt --rw-r--r-- 1 root root 43168 2009-08-04 00:37 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:37 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 485 2009-06-03 05:52 ./slackware64/x/xf86-video-radeonhd-1.2.5-x86_64-1.txt --rw-r--r-- 1 root root 180840 2009-06-03 05:52 ./slackware64/x/xf86-video-radeonhd-1.2.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:52 ./slackware64/x/xf86-video-radeonhd-1.2.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 452 2009-07-16 22:34 ./slackware64/x/xf86-video-rendition-4.2.2-x86_64-1.txt --rw-r--r-- 1 root root 35940 2009-07-16 22:34 ./slackware64/x/xf86-video-rendition-4.2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:34 ./slackware64/x/xf86-video-rendition-4.2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 361 2009-08-04 00:38 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-1.txt --rw-r--r-- 1 root root 29404 2009-08-04 00:38 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 426 2009-08-04 00:38 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-1.txt --rw-r--r-- 1 root root 32672 2009-08-04 00:38 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 413 2009-08-04 00:38 ./slackware64/x/xf86-video-savage-2.3.1-x86_64-1.txt --rw-r--r-- 1 root root 60368 2009-08-04 00:38 ./slackware64/x/xf86-video-savage-2.3.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xf86-video-savage-2.3.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 504 2009-07-16 22:34 ./slackware64/x/xf86-video-siliconmotion-1.7.2-x86_64-1.txt --rw-r--r-- 1 root root 47860 2009-07-16 22:34 ./slackware64/x/xf86-video-siliconmotion-1.7.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:34 ./slackware64/x/xf86-video-siliconmotion-1.7.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-08-04 00:38 ./slackware64/x/xf86-video-sis-0.10.2-x86_64-1.txt --rw-r--r-- 1 root root 232268 2009-08-04 00:38 ./slackware64/x/xf86-video-sis-0.10.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xf86-video-sis-0.10.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 413 2009-08-04 00:38 ./slackware64/x/xf86-video-sisusb-0.9.3-x86_64-1.txt --rw-r--r-- 1 root root 35096 2009-08-04 00:38 ./slackware64/x/xf86-video-sisusb-0.9.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xf86-video-sisusb-0.9.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 387 2009-08-04 00:38 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-1.txt --rw-r--r-- 1 root root 30684 2009-08-04 00:38 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:54 ./slackware64/x/xf86-video-tga-1.2.0-x86_64-1.txt --rw-r--r-- 1 root root 22740 2009-06-03 05:54 ./slackware64/x/xf86-video-tga-1.2.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:54 ./slackware64/x/xf86-video-tga-1.2.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 426 2009-07-16 22:35 ./slackware64/x/xf86-video-trident-1.3.2-x86_64-1.txt --rw-r--r-- 1 root root 59696 2009-07-16 22:35 ./slackware64/x/xf86-video-trident-1.3.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:35 ./slackware64/x/xf86-video-trident-1.3.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-07-16 22:35 ./slackware64/x/xf86-video-tseng-1.2.2-x86_64-1.txt --rw-r--r-- 1 root root 21792 2009-07-16 22:35 ./slackware64/x/xf86-video-tseng-1.2.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-07-16 22:35 ./slackware64/x/xf86-video-tseng-1.2.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 374 2009-06-03 05:54 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-2.txt --rw-r--r-- 1 root root 8580 2009-06-03 05:54 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:54 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 387 2009-08-04 00:38 ./slackware64/x/xf86-video-vesa-2.2.1-x86_64-1.txt --rw-r--r-- 1 root root 11952 2009-08-04 00:38 ./slackware64/x/xf86-video-vesa-2.2.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xf86-video-vesa-2.2.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 413 2009-06-03 05:55 ./slackware64/x/xf86-video-vmware-10.16.6-x86_64-1.txt --rw-r--r-- 1 root root 20968 2009-06-03 05:55 ./slackware64/x/xf86-video-vmware-10.16.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:55 ./slackware64/x/xf86-video-vmware-10.16.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 413 2009-08-04 00:38 ./slackware64/x/xf86-video-voodoo-1.2.3-x86_64-1.txt --rw-r--r-- 1 root root 13332 2009-08-04 00:38 ./slackware64/x/xf86-video-voodoo-1.2.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xf86-video-voodoo-1.2.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:25 ./slackware64/x/xf86bigfontproto-1.1.2-noarch-2.txt --rw-r--r-- 1 root root 1948 2009-06-03 05:25 ./slackware64/x/xf86bigfontproto-1.1.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xf86bigfontproto-1.1.2-noarch-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:41 ./slackware64/x/xf86dga-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 4784 2009-06-03 05:41 ./slackware64/x/xf86dga-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xf86dga-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 348 2009-06-03 05:25 ./slackware64/x/xf86dgaproto-2.0.3-noarch-2.txt --rw-r--r-- 1 root root 4408 2009-06-03 05:25 ./slackware64/x/xf86dgaproto-2.0.3-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xf86dgaproto-2.0.3-noarch-2.txz.asc --rw-r--r-- 1 root root 348 2009-06-03 05:25 ./slackware64/x/xf86driproto-2.0.4-noarch-2.txt --rw-r--r-- 1 root root 3256 2009-06-03 05:25 ./slackware64/x/xf86driproto-2.0.4-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xf86driproto-2.0.4-noarch-2.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:25 ./slackware64/x/xf86miscproto-0.9.2-noarch-2.txt --rw-r--r-- 1 root root 2860 2009-06-03 05:25 ./slackware64/x/xf86miscproto-0.9.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xf86miscproto-0.9.2-noarch-2.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:25 ./slackware64/x/xf86rushproto-1.1.2-noarch-2.txt --rw-r--r-- 1 root root 2148 2009-06-03 05:25 ./slackware64/x/xf86rushproto-1.1.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xf86rushproto-1.1.2-noarch-2.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:25 ./slackware64/x/xf86vidmodeproto-2.2.2-noarch-2.txt --rw-r--r-- 1 root root 4428 2009-06-03 05:25 ./slackware64/x/xf86vidmodeproto-2.2.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xf86vidmodeproto-2.2.2-noarch-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:41 ./slackware64/x/xfd-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 14136 2009-06-03 05:41 ./slackware64/x/xfd-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfd-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:41 ./slackware64/x/xfindproxy-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 7372 2009-06-03 05:41 ./slackware64/x/xfindproxy-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfindproxy-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:41 ./slackware64/x/xfontsel-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 21676 2009-06-03 05:41 ./slackware64/x/xfontsel-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfontsel-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 231 2009-08-04 00:38 ./slackware64/x/xfs-1.1.0-x86_64-1.txt --rw-r--r-- 1 root root 55536 2009-08-04 00:38 ./slackware64/x/xfs-1.1.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xfs-1.1.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:41 ./slackware64/x/xfsinfo-1.0.2-x86_64-1.txt --rw-r--r-- 1 root root 4592 2009-06-03 05:41 ./slackware64/x/xfsinfo-1.0.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfsinfo-1.0.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 244 2009-06-03 05:41 ./slackware64/x/xfwp-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 21568 2009-06-03 05:41 ./slackware64/x/xfwp-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfwp-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:41 ./slackware64/x/xgamma-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 5540 2009-06-03 05:41 ./slackware64/x/xgamma-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xgamma-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:41 ./slackware64/x/xgc-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 23680 2009-06-03 05:41 ./slackware64/x/xgc-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xgc-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:41 ./slackware64/x/xhost-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 8988 2009-06-03 05:41 ./slackware64/x/xhost-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xhost-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 361 2009-06-03 05:25 ./slackware64/x/xineramaproto-1.1.2-noarch-2.txt --rw-r--r-- 1 root root 3176 2009-06-03 05:25 ./slackware64/x/xineramaproto-1.1.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xineramaproto-1.1.2-noarch-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:41 ./slackware64/x/xinit-1.1.1-x86_64-1.txt --rw-r--r-- 1 root root 14244 2009-06-03 05:41 ./slackware64/x/xinit-1.1.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xinit-1.1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 468 2009-06-03 05:41 ./slackware64/x/xinput-1.4.2-x86_64-1.txt --rw-r--r-- 1 root root 11296 2009-06-03 05:41 ./slackware64/x/xinput-1.4.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xinput-1.4.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 283 2009-08-04 00:39 ./slackware64/x/xkbcomp-1.1.0-x86_64-1.txt --rw-r--r-- 1 root root 78844 2009-08-04 00:39 ./slackware64/x/xkbcomp-1.1.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:39 ./slackware64/x/xkbcomp-1.1.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:41 ./slackware64/x/xkbevd-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 16852 2009-06-03 05:41 ./slackware64/x/xkbevd-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xkbevd-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:41 ./slackware64/x/xkbprint-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 42012 2009-06-03 05:41 ./slackware64/x/xkbprint-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xkbprint-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:41 ./slackware64/x/xkbutils-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 13912 2009-06-03 05:41 ./slackware64/x/xkbutils-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xkbutils-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 400 2009-06-03 05:26 ./slackware64/x/xkeyboard-config-1.6-noarch-1.txt --rw-r--r-- 1 root root 394820 2009-06-03 05:26 ./slackware64/x/xkeyboard-config-1.6-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/xkeyboard-config-1.6-noarch-1.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:41 ./slackware64/x/xkill-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 7024 2009-06-03 05:41 ./slackware64/x/xkill-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xkill-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:42 ./slackware64/x/xload-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 7856 2009-06-03 05:42 ./slackware64/x/xload-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xload-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:42 ./slackware64/x/xlogo-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 8868 2009-06-03 05:42 ./slackware64/x/xlogo-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xlogo-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:42 ./slackware64/x/xlsatoms-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 5036 2009-06-03 05:42 ./slackware64/x/xlsatoms-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xlsatoms-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 322 2009-06-03 05:42 ./slackware64/x/xlsclients-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 5676 2009-06-03 05:42 ./slackware64/x/xlsclients-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xlsclients-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:42 ./slackware64/x/xlsfonts-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 11372 2009-06-03 05:42 ./slackware64/x/xlsfonts-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xlsfonts-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 244 2009-06-03 05:42 ./slackware64/x/xmag-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 16192 2009-06-03 05:42 ./slackware64/x/xmag-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xmag-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 244 2009-06-03 05:42 ./slackware64/x/xman-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 32776 2009-06-03 05:42 ./slackware64/x/xman-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xman-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:42 ./slackware64/x/xmessage-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 10120 2009-06-03 05:42 ./slackware64/x/xmessage-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xmessage-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:42 ./slackware64/x/xmh-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 71004 2009-06-03 05:42 ./slackware64/x/xmh-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xmh-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 283 2009-06-03 05:42 ./slackware64/x/xmodmap-1.0.3-x86_64-2.txt --rw-r--r-- 1 root root 17852 2009-06-03 05:42 ./slackware64/x/xmodmap-1.0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xmodmap-1.0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:42 ./slackware64/x/xmore-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 4936 2009-06-03 05:42 ./slackware64/x/xmore-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xmore-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 361 2009-08-11 03:33 ./slackware64/x/xorg-cf-files-1.0.2-noarch-3.txt --rw-r--r-- 1 root root 163608 2009-08-11 03:33 ./slackware64/x/xorg-cf-files-1.0.2-noarch-3.txz --rw-r--r-- 1 root root 197 2009-08-11 03:33 ./slackware64/x/xorg-cf-files-1.0.2-noarch-3.txz.asc --rw-r--r-- 1 root root 309 2009-06-03 05:44 ./slackware64/x/xorg-docs-1.4-noarch-2.txt --rw-r--r-- 1 root root 5630612 2009-06-03 05:44 ./slackware64/x/xorg-docs-1.4-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:44 ./slackware64/x/xorg-docs-1.4-noarch-2.txz.asc --rw-r--r-- 1 root root 698 2009-08-04 00:40 ./slackware64/x/xorg-server-1.6.3-x86_64-1.txt --rw-r--r-- 1 root root 1643972 2009-08-04 00:40 ./slackware64/x/xorg-server-1.6.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:40 ./slackware64/x/xorg-server-1.6.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 370 2009-08-04 00:40 ./slackware64/x/xorg-server-xephyr-1.6.3-x86_64-1.txt --rw-r--r-- 1 root root 690832 2009-08-04 00:40 ./slackware64/x/xorg-server-xephyr-1.6.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:40 ./slackware64/x/xorg-server-xephyr-1.6.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 595 2009-08-04 00:40 ./slackware64/x/xorg-server-xnest-1.6.3-x86_64-1.txt --rw-r--r-- 1 root root 534068 2009-08-04 00:40 ./slackware64/x/xorg-server-xnest-1.6.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:40 ./slackware64/x/xorg-server-xnest-1.6.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 693 2009-08-04 00:40 ./slackware64/x/xorg-server-xvfb-1.6.3-x86_64-1.txt --rw-r--r-- 1 root root 621068 2009-08-04 00:40 ./slackware64/x/xorg-server-xvfb-1.6.3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:40 ./slackware64/x/xorg-server-xvfb-1.6.3-x86_64-1.txz.asc --rw-r--r-- 1 root root 426 2009-06-03 05:44 ./slackware64/x/xorg-sgml-doctools-1.2-noarch-2.txt --rw-r--r-- 1 root root 1276 2009-06-03 05:44 ./slackware64/x/xorg-sgml-doctools-1.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:44 ./slackware64/x/xorg-sgml-doctools-1.2-noarch-2.txz.asc --rw-r--r-- 1 root root 348 2009-06-03 05:42 ./slackware64/x/xplsprinters-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 5424 2009-06-03 05:42 ./slackware64/x/xplsprinters-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xplsprinters-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:42 ./slackware64/x/xpr-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 29956 2009-06-03 05:42 ./slackware64/x/xpr-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xpr-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 439 2009-06-03 05:42 ./slackware64/x/xprehashprinterlist-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 3848 2009-06-03 05:42 ./slackware64/x/xprehashprinterlist-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xprehashprinterlist-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:42 ./slackware64/x/xprop-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 19868 2009-06-03 05:42 ./slackware64/x/xprop-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xprop-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:26 ./slackware64/x/xproto-7.0.15-noarch-1.txt --rw-r--r-- 1 root root 59632 2009-06-03 05:26 ./slackware64/x/xproto-7.0.15-noarch-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/xproto-7.0.15-noarch-1.txz.asc --rw-r--r-- 1 root root 504 2009-06-03 05:26 ./slackware64/x/xproxymanagementprotocol-1.0.2-noarch-2.txt --rw-r--r-- 1 root root 2008 2009-06-03 05:26 ./slackware64/x/xproxymanagementprotocol-1.0.2-noarch-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/xproxymanagementprotocol-1.0.2-noarch-2.txz.asc --rw-r--r-- 1 root root 244 2009-06-03 05:27 ./slackware64/x/xpyb-1.1-x86_64-1.txt --rw-r--r-- 1 root root 101144 2009-06-03 05:27 ./slackware64/x/xpyb-1.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:27 ./slackware64/x/xpyb-1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:42 ./slackware64/x/xrandr-1.3.0-x86_64-1.txt --rw-r--r-- 1 root root 30304 2009-06-03 05:42 ./slackware64/x/xrandr-1.3.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xrandr-1.3.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 244 2009-06-03 05:42 ./slackware64/x/xrdb-1.0.5-x86_64-2.txt --rw-r--r-- 1 root root 15544 2009-06-03 05:42 ./slackware64/x/xrdb-1.0.5-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xrdb-1.0.5-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:42 ./slackware64/x/xrefresh-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 6096 2009-06-03 05:42 ./slackware64/x/xrefresh-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xrefresh-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:43 ./slackware64/x/xscope-1.1-x86_64-1.txt --rw-r--r-- 1 root root 52100 2009-06-03 05:43 ./slackware64/x/xscope-1.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xscope-1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 244 2009-06-03 05:43 ./slackware64/x/xset-1.0.4-x86_64-2.txt --rw-r--r-- 1 root root 17292 2009-06-03 05:43 ./slackware64/x/xset-1.0.4-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xset-1.0.4-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:43 ./slackware64/x/xsetmode-1.0.0-x86_64-2.txt --rw-r--r-- 1 root root 3428 2009-06-03 05:43 ./slackware64/x/xsetmode-1.0.0-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xsetmode-1.0.0-x86_64-2.txz.asc --rw-r--r-- 1 root root 335 2009-06-03 05:43 ./slackware64/x/xsetpointer-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 3908 2009-06-03 05:43 ./slackware64/x/xsetpointer-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xsetpointer-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:43 ./slackware64/x/xsetroot-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 8308 2009-06-03 05:43 ./slackware64/x/xsetroot-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xsetroot-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:43 ./slackware64/x/xsm-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 41896 2009-06-03 05:43 ./slackware64/x/xsm-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xsm-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:43 ./slackware64/x/xstdcmap-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 6512 2009-06-03 05:43 ./slackware64/x/xstdcmap-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xstdcmap-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 308 2009-06-09 00:02 ./slackware64/x/xterm-243-x86_64-2.txt --rw-r--r-- 1 root root 224644 2009-06-09 00:02 ./slackware64/x/xterm-243-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 00:02 ./slackware64/x/xterm-243-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-08-04 00:40 ./slackware64/x/xtrans-1.2.4-noarch-1.txt --rw-r--r-- 1 root root 37704 2009-08-04 00:40 ./slackware64/x/xtrans-1.2.4-noarch-1.txz --rw-r--r-- 1 root root 197 2009-08-04 00:40 ./slackware64/x/xtrans-1.2.4-noarch-1.txz.asc --rw-r--r-- 1 root root 257 2009-06-03 05:43 ./slackware64/x/xtrap-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 16856 2009-06-03 05:43 ./slackware64/x/xtrap-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xtrap-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:43 ./slackware64/x/xvidtune-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 16548 2009-06-03 05:43 ./slackware64/x/xvidtune-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xvidtune-1.0.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 270 2009-06-03 05:43 ./slackware64/x/xvinfo-1.0.2-x86_64-2.txt --rw-r--r-- 1 root root 5052 2009-06-03 05:43 ./slackware64/x/xvinfo-1.0.2-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xvinfo-1.0.2-x86_64-2.txz.asc --rw-r--r-- 1 root root 231 2009-06-03 05:43 ./slackware64/x/xwd-1.0.2-x86_64-1.txt --rw-r--r-- 1 root root 14344 2009-06-03 05:43 ./slackware64/x/xwd-1.0.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xwd-1.0.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 296 2009-06-03 05:43 ./slackware64/x/xwininfo-1.0.4-x86_64-1.txt --rw-r--r-- 1 root root 14856 2009-06-03 05:43 ./slackware64/x/xwininfo-1.0.4-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xwininfo-1.0.4-x86_64-1.txz.asc --rw-r--r-- 1 root root 244 2009-06-03 05:43 ./slackware64/x/xwud-1.0.1-x86_64-2.txt --rw-r--r-- 1 root root 13624 2009-06-03 05:43 ./slackware64/x/xwud-1.0.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xwud-1.0.1-x86_64-2.txz.asc -drwxr-xr-x 2 root root 12288 2009-08-25 04:55 ./slackware64/xap --rw-r--r-- 1 root root 479 2009-06-26 00:18 ./slackware64/xap/MPlayer-r29390-x86_64-1.txt --rw-r--r-- 1 root root 7493452 2009-06-26 00:18 ./slackware64/xap/MPlayer-r29390-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-26 00:18 ./slackware64/xap/MPlayer-r29390-x86_64-1.txz.asc --rw-r--r-- 1 root root 615 2009-04-11 15:56 ./slackware64/xap/audacious-1.5.1-x86_64-3.txt --rw-r--r-- 1 root root 849348 2009-04-11 15:56 ./slackware64/xap/audacious-1.5.1-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-04-11 15:56 ./slackware64/xap/audacious-1.5.1-x86_64-3.txz.asc --rw-r--r-- 1 root root 424 2008-11-30 13:00 ./slackware64/xap/audacious-plugins-1.5.1-x86_64-4.txt --rw-r--r-- 1 root root 1032960 2008-11-30 13:00 ./slackware64/xap/audacious-plugins-1.5.1-x86_64-4.txz --rw-r--r-- 1 root root 197 2008-11-30 13:00 ./slackware64/xap/audacious-plugins-1.5.1-x86_64-4.txz.asc --rw-r--r-- 1 root root 441 2008-10-25 18:05 ./slackware64/xap/blackbox-0.65.0-x86_64-4.txt --rw-r--r-- 1 root root 260988 2008-10-25 18:05 ./slackware64/xap/blackbox-0.65.0-x86_64-4.txz --rw-r--r-- 1 root root 197 2008-10-25 18:05 ./slackware64/xap/blackbox-0.65.0-x86_64-4.txz.asc --rw-r--r-- 1 root root 652 2009-07-01 20:32 ./slackware64/xap/electricsheep-20090306-x86_64-2.txt --rw-r--r-- 1 root root 2460256 2009-07-01 20:32 ./slackware64/xap/electricsheep-20090306-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-07-01 20:32 ./slackware64/xap/electricsheep-20090306-x86_64-2.txz.asc --rw-r--r-- 1 root root 229 2008-10-29 10:30 ./slackware64/xap/fluxbox-1.1.1-x86_64-1.txt --rw-r--r-- 1 root root 726900 2008-10-29 10:30 ./slackware64/xap/fluxbox-1.1.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-29 10:30 ./slackware64/xap/fluxbox-1.1.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 337 2008-10-25 22:52 ./slackware64/xap/fvwm-2.4.20-x86_64-1.txt --rw-r--r-- 1 root root 1000700 2008-10-25 22:52 ./slackware64/xap/fvwm-2.4.20-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-25 22:52 ./slackware64/xap/fvwm-2.4.20-x86_64-1.txz.asc --rw-r--r-- 1 root root 444 2009-05-23 04:36 ./slackware64/xap/gftp-2.0.19-x86_64-2.txt --rw-r--r-- 1 root root 589988 2009-05-23 04:36 ./slackware64/xap/gftp-2.0.19-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 04:36 ./slackware64/xap/gftp-2.0.19-x86_64-2.txz.asc --rw-r--r-- 1 root root 473 2009-06-09 19:11 ./slackware64/xap/gimp-2.6.6-x86_64-2.txt --rw-r--r-- 1 root root 9795212 2009-06-09 19:11 ./slackware64/xap/gimp-2.6.6-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 19:11 ./slackware64/xap/gimp-2.6.6-x86_64-2.txz.asc --rw-r--r-- 1 root root 513 2008-10-29 10:13 ./slackware64/xap/gkrellm-2.3.2-x86_64-1.txt --rw-r--r-- 1 root root 514812 2008-10-29 10:13 ./slackware64/xap/gkrellm-2.3.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-10-29 10:13 ./slackware64/xap/gkrellm-2.3.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 337 2009-05-23 04:36 ./slackware64/xap/gnuchess-5.07-x86_64-4.txt --rw-r--r-- 1 root root 853964 2009-05-23 04:36 ./slackware64/xap/gnuchess-5.07-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-05-23 04:36 ./slackware64/xap/gnuchess-5.07-x86_64-4.txz.asc --rw-r--r-- 1 root root 647 2009-08-11 00:49 ./slackware64/xap/gnuplot-4.2.5-x86_64-1.txt --rw-r--r-- 1 root root 1051980 2009-08-11 00:49 ./slackware64/xap/gnuplot-4.2.5-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-11 00:49 ./slackware64/xap/gnuplot-4.2.5-x86_64-1.txz.asc --rw-r--r-- 1 root root 272 2008-11-04 14:14 ./slackware64/xap/gqview-2.1.5-x86_64-2.txt --rw-r--r-- 1 root root 650192 2008-11-04 14:14 ./slackware64/xap/gqview-2.1.5-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-11-04 14:14 ./slackware64/xap/gqview-2.1.5-x86_64-2.txz.asc --rw-r--r-- 1 root root 209 2009-06-09 05:41 ./slackware64/xap/gucharmap-2.26.2-x86_64-1.txt --rw-r--r-- 1 root root 1926508 2009-06-09 05:41 ./slackware64/xap/gucharmap-2.26.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 05:41 ./slackware64/xap/gucharmap-2.26.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 370 2009-05-09 21:44 ./slackware64/xap/gv-3.6.7-x86_64-1.txt --rw-r--r-- 1 root root 183192 2009-05-09 21:44 ./slackware64/xap/gv-3.6.7-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-05-09 21:44 ./slackware64/xap/gv-3.6.7-x86_64-1.txz.asc --rw-r--r-- 1 root root 336 2009-06-10 01:22 ./slackware64/xap/gxine-0.5.903-x86_64-2.txt --rw-r--r-- 1 root root 366732 2009-06-10 01:22 ./slackware64/xap/gxine-0.5.903-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-10 01:22 ./slackware64/xap/gxine-0.5.903-x86_64-2.txz.asc --rw-r--r-- 1 root root 540 2009-06-09 05:51 ./slackware64/xap/imagemagick-6.5.3_3-x86_64-1.txt --rw-r--r-- 1 root root 4313328 2009-06-09 05:51 ./slackware64/xap/imagemagick-6.5.3_3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-09 05:51 ./slackware64/xap/imagemagick-6.5.3_3-x86_64-1.txz.asc --rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/xap/install-packages --rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/xap/install.end --rw-r--r-- 1 root root 4073 2009-08-19 00:07 ./slackware64/xap/maketag --rw-r--r-- 1 root root 4073 2009-08-19 00:07 ./slackware64/xap/maketag.ez --rw-r--r-- 1 root root 527 2009-08-03 19:09 ./slackware64/xap/mozilla-firefox-3.5.2-x86_64-1.txt --rw-r--r-- 1 root root 8883560 2009-08-03 19:09 ./slackware64/xap/mozilla-firefox-3.5.2-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-03 19:09 ./slackware64/xap/mozilla-firefox-3.5.2-x86_64-1.txz.asc --rw-r--r-- 1 root root 702 2009-08-21 02:53 ./slackware64/xap/mozilla-thunderbird-2.0.0.23-x86_64-1.txt --rw-r--r-- 1 root root 10010248 2009-08-21 02:53 ./slackware64/xap/mozilla-thunderbird-2.0.0.23-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-21 02:53 ./slackware64/xap/mozilla-thunderbird-2.0.0.23-x86_64-1.txz.asc --rw-r--r-- 1 root root 267 2008-11-06 15:38 ./slackware64/xap/pan-0.133-x86_64-1.txt --rw-r--r-- 1 root root 740284 2008-11-06 15:38 ./slackware64/xap/pan-0.133-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-06 15:38 ./slackware64/xap/pan-0.133-x86_64-1.txz.asc --rw-r--r-- 1 root root 469 2009-08-19 18:02 ./slackware64/xap/pidgin-2.5.9-x86_64-1.txt --rw-r--r-- 1 root root 6119640 2009-08-19 18:02 ./slackware64/xap/pidgin-2.5.9-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-19 18:02 ./slackware64/xap/pidgin-2.5.9-x86_64-1.txz.asc --rw-r--r-- 1 root root 395 2008-11-06 15:45 ./slackware64/xap/rdesktop-1.6.0-x86_64-1.txt --rw-r--r-- 1 root root 130948 2008-11-06 15:45 ./slackware64/xap/rdesktop-1.6.0-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-06 15:45 ./slackware64/xap/rdesktop-1.6.0-x86_64-1.txz.asc --rw-r--r-- 1 root root 425 2009-06-09 19:32 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txt --rw-r--r-- 1 root root 162500 2009-06-09 19:32 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-06-09 19:32 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txz.asc --rw-r--r-- 1 root root 321 2009-05-23 06:36 ./slackware64/xap/sane-1.0.19-x86_64-4.txt --rw-r--r-- 1 root root 2413448 2009-05-23 06:36 ./slackware64/xap/sane-1.0.19-x86_64-4.txz --rw-r--r-- 1 root root 197 2009-05-23 06:36 ./slackware64/xap/sane-1.0.19-x86_64-4.txz.asc --rw-r--r-- 1 root root 534 2009-06-24 19:08 ./slackware64/xap/seamonkey-1.1.17-x86_64-1.txt --rw-r--r-- 1 root root 13176452 2009-06-24 19:08 ./slackware64/xap/seamonkey-1.1.17-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-24 19:08 ./slackware64/xap/seamonkey-1.1.17-x86_64-1.txz.asc --rw-r--r-- 1 root root 609 2009-03-16 23:11 ./slackware64/xap/seyon-2.20c-x86_64-3.txt --rw-r--r-- 1 root root 113164 2009-03-16 23:11 ./slackware64/xap/seyon-2.20c-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-03-16 23:11 ./slackware64/xap/seyon-2.20c-x86_64-3.txz.asc --rw-r--r-- 1 root root 588 2009-08-19 00:07 ./slackware64/xap/tagfile --rw-r--r-- 1 root root 488 2009-03-16 12:27 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txt --rw-r--r-- 1 root root 70548 2009-03-16 12:27 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-03-16 12:27 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txz.asc --rw-r--r-- 1 root root 505 2009-08-25 01:14 ./slackware64/xap/vim-gvim-7.2.245-x86_64-1.txt --rw-r--r-- 1 root root 1450992 2009-08-25 01:14 ./slackware64/xap/vim-gvim-7.2.245-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-25 01:14 ./slackware64/xap/vim-gvim-7.2.245-x86_64-1.txz.asc --rw-r--r-- 1 root root 455 2009-06-09 20:06 ./slackware64/xap/windowmaker-20060427cvs-x86_64-2.txt --rw-r--r-- 1 root root 1783284 2009-06-09 20:06 ./slackware64/xap/windowmaker-20060427cvs-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-06-09 20:06 ./slackware64/xap/windowmaker-20060427cvs-x86_64-2.txz.asc --rw-r--r-- 1 root root 308 2009-08-18 23:17 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-1.txt --rw-r--r-- 1 root root 20584 2009-08-18 23:17 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-18 23:17 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-1.txz.asc --rw-r--r-- 1 root root 310 2008-11-06 15:59 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txt --rw-r--r-- 1 root root 508772 2008-11-06 15:59 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-06 15:59 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txz.asc --rw-r--r-- 1 root root 164 2009-06-09 19:34 ./slackware64/xap/xchat-2.8.6-x86_64-3.txt --rw-r--r-- 1 root root 1723072 2009-06-09 19:34 ./slackware64/xap/xchat-2.8.6-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-09 19:34 ./slackware64/xap/xchat-2.8.6-x86_64-3.txz.asc --rw-r--r-- 1 root root 309 2009-08-06 03:16 ./slackware64/xap/xfce-4.6.1-x86_64-5.txt --rw-r--r-- 1 root root 12328656 2009-08-06 03:16 ./slackware64/xap/xfce-4.6.1-x86_64-5.txz --rw-r--r-- 1 root root 197 2009-08-06 03:16 ./slackware64/xap/xfce-4.6.1-x86_64-5.txz.asc --rw-r--r-- 1 root root 472 2009-06-12 20:54 ./slackware64/xap/xfce4-power-manager-0.6.6-x86_64-1.txt --rw-r--r-- 1 root root 237912 2009-06-12 20:54 ./slackware64/xap/xfce4-power-manager-0.6.6-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-12 20:54 ./slackware64/xap/xfce4-power-manager-0.6.6-x86_64-1.txz.asc --rw-r--r-- 1 root root 411 2008-11-06 14:17 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txt --rw-r--r-- 1 root root 837944 2008-11-06 14:17 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-06 14:17 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txz.asc --rw-r--r-- 1 root root 239 2009-08-22 21:21 ./slackware64/xap/xgames-0.3-x86_64-2.txt --rw-r--r-- 1 root root 103428 2009-08-22 21:21 ./slackware64/xap/xgames-0.3-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-08-22 21:21 ./slackware64/xap/xgames-0.3-x86_64-2.txz.asc --rw-r--r-- 1 root root 468 2009-06-09 18:54 ./slackware64/xap/xine-lib-1.1.16.3-x86_64-5.txt --rw-r--r-- 1 root root 3579360 2009-06-09 18:54 ./slackware64/xap/xine-lib-1.1.16.3-x86_64-5.txz --rw-r--r-- 1 root root 197 2009-06-09 18:54 ./slackware64/xap/xine-lib-1.1.16.3-x86_64-5.txz.asc --rw-r--r-- 1 root root 374 2009-05-23 06:54 ./slackware64/xap/xine-ui-0.99.5-x86_64-2.txt --rw-r--r-- 1 root root 1278736 2009-05-23 06:54 ./slackware64/xap/xine-ui-0.99.5-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-23 06:54 ./slackware64/xap/xine-ui-0.99.5-x86_64-2.txz.asc --rw-r--r-- 1 root root 462 2009-08-08 01:11 ./slackware64/xap/xlockmore-5.28-x86_64-1.txt --rw-r--r-- 1 root root 985268 2009-08-08 01:11 ./slackware64/xap/xlockmore-5.28-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-08-08 01:11 ./slackware64/xap/xlockmore-5.28-x86_64-1.txz.asc --rw-r--r-- 1 root root 379 2009-06-09 20:22 ./slackware64/xap/xmms-1.2.11-x86_64-3.txt --rw-r--r-- 1 root root 1025152 2009-06-09 20:22 ./slackware64/xap/xmms-1.2.11-x86_64-3.txz --rw-r--r-- 1 root root 197 2009-06-09 20:22 ./slackware64/xap/xmms-1.2.11-x86_64-3.txz.asc --rw-r--r-- 1 root root 445 2008-11-06 21:50 ./slackware64/xap/xpaint-2.7.8.1-x86_64-2.txt --rw-r--r-- 1 root root 319984 2008-11-06 21:50 ./slackware64/xap/xpaint-2.7.8.1-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-11-06 21:50 ./slackware64/xap/xpaint-2.7.8.1-x86_64-2.txz.asc --rw-r--r-- 1 root root 256 2009-05-10 10:58 ./slackware64/xap/xpdf-3.02pl3-x86_64-1.txt --rw-r--r-- 1 root root 1509652 2009-05-10 10:58 ./slackware64/xap/xpdf-3.02pl3-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-05-10 10:58 ./slackware64/xap/xpdf-3.02pl3-x86_64-1.txz.asc --rw-r--r-- 1 root root 499 2008-11-06 22:11 ./slackware64/xap/xsane-0.996-x86_64-1.txt --rw-r--r-- 1 root root 1624816 2008-11-06 22:11 ./slackware64/xap/xsane-0.996-x86_64-1.txz --rw-r--r-- 1 root root 197 2008-11-06 22:11 ./slackware64/xap/xsane-0.996-x86_64-1.txz.asc --rw-r--r-- 1 root root 424 2009-05-16 00:18 ./slackware64/xap/xscreensaver-5.08-x86_64-2.txt --rw-r--r-- 1 root root 3422516 2009-05-16 00:18 ./slackware64/xap/xscreensaver-5.08-x86_64-2.txz --rw-r--r-- 1 root root 197 2009-05-16 00:18 ./slackware64/xap/xscreensaver-5.08-x86_64-2.txz.asc --rw-r--r-- 1 root root 235 2008-11-06 22:31 ./slackware64/xap/xv-3.10a-x86_64-5.txt --rw-r--r-- 1 root root 925876 2008-11-06 22:31 ./slackware64/xap/xv-3.10a-x86_64-5.txz --rw-r--r-- 1 root root 197 2008-11-06 22:31 ./slackware64/xap/xv-3.10a-x86_64-5.txz.asc --rw-r--r-- 1 root root 418 2008-11-06 22:42 ./slackware64/xap/xxgdb-1.12-x86_64-2.txt --rw-r--r-- 1 root root 50184 2008-11-06 22:42 ./slackware64/xap/xxgdb-1.12-x86_64-2.txz --rw-r--r-- 1 root root 197 2008-11-06 22:42 ./slackware64/xap/xxgdb-1.12-x86_64-2.txz.asc -drwxr-xr-x 2 root root 4096 2009-05-23 08:11 ./slackware64/y --rw-r--r-- 1 root root 596 2009-05-23 04:18 ./slackware64/y/bsd-games-2.13-x86_64-9.txt --rw-r--r-- 1 root root 1754988 2009-05-23 04:18 ./slackware64/y/bsd-games-2.13-x86_64-9.txz --rw-r--r-- 1 root root 197 2009-05-23 04:18 ./slackware64/y/bsd-games-2.13-x86_64-9.txz.asc --rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/y/install-packages --rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/y/install.end --rw-r--r-- 1 root root 1136 2009-04-30 20:01 ./slackware64/y/maketag --rw-r--r-- 1 root root 1136 2009-04-30 20:01 ./slackware64/y/maketag.ez --rw-r--r-- 1 root root 14 2009-04-30 20:01 ./slackware64/y/tagfile -drwxr-xr-x 18 root root 4096 2009-08-26 15:18 ./source --rw-r--r-- 1 root root 311441 2009-08-26 15:18 ./source/CHECKSUMS.md5 --rw-r--r-- 1 root root 197 2009-08-26 15:18 ./source/CHECKSUMS.md5.asc --rw-r--r-- 1 root root 434507 2009-08-26 15:17 ./source/FILE_LIST --rw-r--r-- 1 root root 6118676 2009-08-26 15:17 ./source/MANIFEST.bz2 -drwxr-xr-x 90 root root 4096 2009-08-26 03:22 ./source/a -drwxr-xr-x 2 root root 4096 2009-08-26 03:17 ./source/a/aaa_base --rw-r--r-- 1 root root 11004 2009-08-26 03:17 ./source/a/aaa_base/_aaa_base.tar.gz --rwxr-xr-x 1 root root 1812 2009-08-26 03:23 ./source/a/aaa_base/aaa_base.SlackBuild --rw-r--r-- 1 root root 786 2002-03-28 08:05 ./source/a/aaa_base/slack-desc --rw-r--r-- 1 root root 21 2009-06-16 18:05 ./source/a/aaa_base/slackware-version -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/aaa_elflibs --rwxr-xr-x 1 root root 2335 2009-08-22 05:48 ./source/a/aaa_elflibs/aaa_elflibs.SlackBuild --rw-r--r-- 1 root root 1030 2004-06-14 04:14 ./source/a/aaa_elflibs/slack-desc --rw-r--r-- 1 root root 1233 2009-03-30 07:39 ./source/a/aaa_elflibs/symlinks-to-tracked-libs --rw-r--r-- 1 root root 170 2008-04-03 04:10 ./source/a/aaa_elflibs/tracked-files -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/aaa_terminfo --rwxr-xr-x 1 root root 2183 2009-05-19 20:05 ./source/a/aaa_terminfo/aaa_terminfo.SlackBuild --rw-r--r-- 1 root root 968 2007-01-02 23:40 ./source/a/aaa_terminfo/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/acl --rwxr-xr-x 1 root root 3474 2009-05-19 20:05 ./source/a/acl/acl.SlackBuild --rw-r--r-- 1 root root 507 2008-04-01 04:58 ./source/a/acl/acl.destdir.diff.gz --rw-r--r-- 1 root root 154823 2008-02-11 06:35 ./source/a/acl/acl_2.2.47-1.tar.gz --rw-r--r-- 1 root root 819 2006-02-21 04:39 ./source/a/acl/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/acpid --rw-r--r-- 1 root root 224 2004-02-05 01:54 ./source/a/acpid/acpi_handler.sh.gz --rw-r--r-- 1 root root 23988 2008-10-29 03:57 ./source/a/acpid/acpid-1.0.8.tar.bz2 --rwxr-xr-x 1 root root 2592 2009-05-19 20:05 ./source/a/acpid/acpid.SlackBuild --rw-r--r-- 1 root root 399 2002-05-16 21:44 ./source/a/acpid/default.gz --rw-r--r-- 1 root root 277 2008-11-19 23:29 ./source/a/acpid/doinst.sh.gz --rw-r--r-- 1 root root 258 2003-08-28 06:56 ./source/a/acpid/rc.acpid.gz --rw-r--r-- 1 root root 867 2002-05-16 21:59 ./source/a/acpid/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/apmd --rw-r--r-- 1 root root 61686 2004-04-30 04:29 ./source/a/apmd/apmd-3.2.2.tar.bz2 --rwxr-xr-x 1 root root 3158 2009-06-10 01:19 ./source/a/apmd/apmd.SlackBuild --rw-r--r-- 1 root root 1009 2002-02-22 00:45 ./source/a/apmd/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/attr --rwxr-xr-x 1 root root 3521 2009-05-19 20:05 ./source/a/attr/attr.SlackBuild --rw-r--r-- 1 root root 510 2008-04-01 04:54 ./source/a/attr/attr.destdir.diff.gz --rw-r--r-- 1 root root 116991 2008-07-03 07:41 ./source/a/attr/attr_2.4.43-1.tar.gz --rw-r--r-- 1 root root 88 2006-02-28 00:02 ./source/a/attr/build --rw-r--r-- 1 root root 1011 2006-02-21 04:44 ./source/a/attr/slack-desc -drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/a/bash --rw-r--r-- 1 root root 2533934 2005-12-08 16:51 ./source/a/bash/bash-3.1.tar.gz --rwxr-xr-x 1 root root 3185 2009-05-19 20:05 ./source/a/bash/bash.SlackBuild --rw-r--r-- 1 root root 205 2002-08-27 00:02 ./source/a/bash/doinst.sh.gz -drwxr-xr-x 2 root root 4096 2006-05-13 23:54 ./source/a/bash/patches --rw-r--r-- 1 root root 1120 2005-12-21 22:49 ./source/a/bash/patches/bash31-001.gz --rw-r--r-- 1 root root 2247 2006-01-09 17:02 ./source/a/bash/patches/bash31-002.gz --rw-r--r-- 1 root root 762 2006-01-09 17:02 ./source/a/bash/patches/bash31-003.gz --rw-r--r-- 1 root root 684 2006-01-09 17:02 ./source/a/bash/patches/bash31-004.gz --rw-r--r-- 1 root root 692 2006-01-09 17:02 ./source/a/bash/patches/bash31-005.gz --rw-r--r-- 1 root root 730 2006-02-03 20:46 ./source/a/bash/patches/bash31-006.gz --rw-r--r-- 1 root root 1289 2006-02-03 20:46 ./source/a/bash/patches/bash31-007.gz --rw-r--r-- 1 root root 669 2006-02-15 22:20 ./source/a/bash/patches/bash31-008.gz --rw-r--r-- 1 root root 872 2006-02-20 13:30 ./source/a/bash/patches/bash31-009.gz --rw-r--r-- 1 root root 914 2006-02-20 13:30 ./source/a/bash/patches/bash31-010.gz --rw-r--r-- 1 root root 682 2006-02-27 22:45 ./source/a/bash/patches/bash31-011.gz --rw-r--r-- 1 root root 614 2006-03-16 14:14 ./source/a/bash/patches/bash31-012.gz --rw-r--r-- 1 root root 589 2006-03-16 14:14 ./source/a/bash/patches/bash31-013.gz --rw-r--r-- 1 root root 1155 2006-03-16 14:14 ./source/a/bash/patches/bash31-014.gz --rw-r--r-- 1 root root 1084 2006-03-30 14:20 ./source/a/bash/patches/bash31-015.gz --rw-r--r-- 1 root root 696 2006-03-30 14:20 ./source/a/bash/patches/bash31-016.gz --rw-r--r-- 1 root root 1276 2006-04-12 15:26 ./source/a/bash/patches/bash31-017.gz --rw-r--r-- 1 root root 965 2002-03-23 21:47 ./source/a/bash/slack-desc -drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/a/bin --rw-r--r-- 1 root root 7275 1994-12-30 09:11 ./source/a/bin/banners.tar.gz --rwxr-xr-x 1 root root 4222 2009-05-19 20:05 ./source/a/bin/bin.SlackBuild --rw-r--r-- 1 root root 478 2004-02-24 17:32 ./source/a/bin/debianutils_2.7.dsc --rw-r--r-- 1 root root 165590 2004-02-24 17:32 ./source/a/bin/debianutils_2.7.tar.gz --rw-r--r-- 1 root root 27721 1999-10-07 14:42 ./source/a/bin/fbset-2.1.tar.gz -drwxr-xr-x 2 root root 4096 2006-12-23 06:28 ./source/a/bin/scripts --rw-r--r-- 1 root root 195 2002-02-21 21:08 ./source/a/bin/scripts/diskcopy.gz --rw-r--r-- 1 root root 595 1993-05-02 00:04 ./source/a/bin/scripts/xx.gz --rw-r--r-- 1 root root 681 2006-12-21 20:40 ./source/a/bin/slack-desc --rw-r--r-- 1 root root 2403 1997-06-15 20:38 ./source/a/bin/todos.tar.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/bzip2 --rw-r--r-- 1 root root 280 2007-01-24 04:02 ./source/a/bzip2/bzip2-1.0.4.saneso.diff.gz --rw-r--r-- 1 root root 841402 2008-03-17 23:25 ./source/a/bzip2/bzip2-1.0.5.tar.gz --rwxr-xr-x 1 root root 3679 2009-05-19 20:05 ./source/a/bzip2/bzip2.SlackBuild --rw-r--r-- 1 root root 934 2002-02-19 04:26 ./source/a/bzip2/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/coreutils --rw-r--r-- 1 root root 1723 2009-04-11 18:47 ./source/a/coreutils/DIR_COLORS.gz --rw-r--r-- 1 root root 4048924 2009-05-07 17:05 ./source/a/coreutils/coreutils-7.4.tar.xz --rw-r--r-- 1 root root 835 2009-05-07 17:05 ./source/a/coreutils/coreutils-7.4.tar.xz.sig --rw-r--r-- 1 root root 779 2007-01-01 22:56 ./source/a/coreutils/coreutils-dircolors.csh.gz --rw-r--r-- 1 root root 1066 2007-01-01 22:57 ./source/a/coreutils/coreutils-dircolors.sh.gz --rwxr-xr-x 1 root root 6211 2009-05-19 20:05 ./source/a/coreutils/coreutils.SlackBuild --rw-r--r-- 1 root root 1794 2009-02-23 03:30 ./source/a/coreutils/coreutils.uname.diff.gz --rw-r--r-- 1 root root 270 2009-02-23 03:00 ./source/a/coreutils/doinst.sh.gz --rw-r--r-- 1 root root 985 2003-05-20 21:33 ./source/a/coreutils/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 02:17 ./source/a/cpio --rw-r--r-- 1 root root 348 2009-03-15 20:17 ./source/a/cpio/cpio-2.9.gcc43.diff.gz --rw-r--r-- 1 root root 758195 2007-06-29 16:51 ./source/a/cpio/cpio-2.9.tar.bz2 --rwxr-xr-x 1 root root 3664 2009-05-19 20:05 ./source/a/cpio/cpio.SlackBuild --rw-r--r-- 1 root root 942 2002-03-23 21:52 ./source/a/cpio/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-24 03:23 ./source/a/cryptsetup --rw-r--r-- 1 root root 417339 2009-07-22 11:28 ./source/a/cryptsetup/cryptsetup-1.0.7.tar.bz2 --rw-r--r-- 1 root root 197 2009-07-22 11:29 ./source/a/cryptsetup/cryptsetup-1.0.7.tar.bz2.asc --rwxr-xr-x 1 root root 4440 2009-08-24 03:28 ./source/a/cryptsetup/cryptsetup.SlackBuild --rw-r--r-- 1 root root 1042 2007-05-26 11:18 ./source/a/cryptsetup/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-22 02:31 ./source/a/cups --rw-r--r-- 1 root root 3048852 2009-07-02 22:13 ./source/a/cups/cups-1.3.11-source.tar.xz --rw-r--r-- 1 root root 199167 2004-01-03 18:49 ./source/a/cups/cups-samba-5.0rc3.tar.gz --rw-r--r-- 1 root root 38284 2006-04-19 23:55 ./source/a/cups/cups-windows-6.0-source.tar.bz2 --rwxr-xr-x 1 root root 5487 2009-08-22 05:30 ./source/a/cups/cups.SlackBuild --rw-r--r-- 1 root root 286 2009-08-22 01:18 ./source/a/cups/cups.firefox.desktop.diff.gz --rw-r--r-- 1 root root 453 2007-05-09 21:13 ./source/a/cups/doinst.sh.gz --rw-r--r-- 1 root root 1099 2002-02-01 20:47 ./source/a/cups/slack-desc -drwxr-xr-x 3 root root 4096 2009-07-24 23:40 ./source/a/cxxlibs --rwxr-xr-x 1 root root 1825 2009-07-24 23:41 ./source/a/cxxlibs/cxxlibs.SlackBuild -drwxr-xr-x 2 root root 4096 2009-07-24 21:14 ./source/a/cxxlibs/oldgcc --rw-r--r-- 1 root root 23972413 2007-05-31 19:07 ./source/a/cxxlibs/oldgcc/gcc-3.3.6.tar.bz2 --rw-r--r-- 1 root root 65 2007-05-31 19:07 ./source/a/cxxlibs/oldgcc/gcc-3.3.6.tar.bz2.sig --rwxr-xr-x 1 root root 2455 2009-07-24 21:15 ./source/a/cxxlibs/oldgcc/oldgcc.build --rw-r--r-- 1 root root 738 2002-03-23 21:52 ./source/a/cxxlibs/slack-desc --rw-r--r-- 1 root root 224 2008-04-03 05:03 ./source/a/cxxlibs/symlinks-to-tracked-libs --rw-r--r-- 1 root root 52 2009-07-24 23:39 ./source/a/cxxlibs/symlinks-to-tracked-libs64 -drwxr-xr-x 2 root root 4096 2009-06-09 02:52 ./source/a/dbus --rw-r--r-- 1 root root 1001892 2009-05-13 03:29 ./source/a/dbus/dbus-1.2.14.tar.xz --rwxr-xr-x 1 root root 3600 2009-06-09 02:52 ./source/a/dbus/dbus.SlackBuild --rw-r--r-- 1 root root 355 2008-09-23 18:06 ./source/a/dbus/doinst.sh.gz --rw-r--r-- 1 root root 773 2008-10-08 00:14 ./source/a/dbus/rc.messagebus.gz --rw-r--r-- 1 root root 945 2007-10-21 22:41 ./source/a/dbus/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/dcron --rw-r--r-- 1 root root 1127 2006-12-13 22:28 ./source/a/dcron/_dcron.tar.gz --rw-r--r-- 1 root root 350 2002-02-20 22:33 ./source/a/dcron/dcron-2.3.3.crontab.diff4.gz --rw-r--r-- 1 root root 544 1999-08-26 21:57 ./source/a/dcron/dcron-2.3.3.diff.gz --rw-r--r-- 1 root root 3987 2000-05-12 22:10 ./source/a/dcron/dcron-2.3.3.diff2.gz --rw-r--r-- 1 root root 192 2001-05-30 21:13 ./source/a/dcron/dcron-2.3.3.diff3.gz --rw-r--r-- 1 root root 594 1998-02-16 19:35 ./source/a/dcron/dcron-2.3.3.lsm --rw-r--r-- 1 root root 22962 1998-02-16 19:35 ./source/a/dcron/dcron-2.3.3.tar.gz --rw-r--r-- 1 root root 168 2002-04-09 08:07 ./source/a/dcron/dcron-2.3.3.version.diff.gz --rwxr-xr-x 1 root root 2957 2009-05-19 20:05 ./source/a/dcron/dcron.SlackBuild --rw-r--r-- 1 root root 208 2005-09-11 23:38 ./source/a/dcron/dcron.fork.diff.gz --rw-r--r-- 1 root root 198 1999-04-05 02:13 ./source/a/dcron/dcron.tmpdir.diff.gz --rw-r--r-- 1 root root 699 2002-04-15 02:48 ./source/a/dcron/run-parts.8.gz --rw-r--r-- 1 root root 566 2002-04-15 02:48 ./source/a/dcron/run-parts.gz --rw-r--r-- 1 root root 815 2002-02-21 22:50 ./source/a/dcron/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/device-mapper --rw-r--r-- 1 root root 1364 2008-10-06 11:19 ./source/a/device-mapper/64-device-mapper.rules --rw-r--r-- 1 root root 167532 2008-10-06 11:19 ./source/a/device-mapper/device-mapper.1.02.28.tar.bz2 --rwxr-xr-x 1 root root 3645 2009-05-19 20:05 ./source/a/device-mapper/device-mapper.SlackBuild --rw-r--r-- 1 root root 983 2008-02-08 17:25 ./source/a/device-mapper/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/devs --rw-r--r-- 1 root root 92572 2006-09-20 03:46 ./source/a/devs/_devs.tar.gz --rwxr-xr-x 1 root root 2044 2009-05-19 20:05 ./source/a/devs/devs.SlackBuild --rw-r--r-- 1 root root 423 2002-06-09 19:32 ./source/a/devs/makedev.hd.diff.gz --rw-r--r-- 1 root root 27096 2000-11-11 19:33 ./source/a/devs/makedev_2.3.1-46.2.diff.gz --rw-r--r-- 1 root root 602 2003-09-02 20:00 ./source/a/devs/makedev_2.3.1.hd.diff.gz --rw-r--r-- 1 root root 10037 1998-09-07 17:52 ./source/a/devs/makedev_2.3.1.orig.tar.gz --rw-r--r-- 1 root root 262 2004-05-21 02:29 ./source/a/devs/makedev_2.3.1.slack.diff.gz --rw-r--r-- 1 root root 766 2002-03-20 01:10 ./source/a/devs/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/dialog --rw-r--r-- 1 root root 301393 2008-08-20 00:36 ./source/a/dialog/dialog-1.1-20080819.tar.bz2 --rwxr-xr-x 1 root root 3537 2009-05-23 00:41 ./source/a/dialog/dialog.SlackBuild --rw-r--r-- 1 root root 334 2009-04-23 01:28 ./source/a/dialog/dialog.smaller.min.height.diff.gz --rw-r--r-- 1 root root 970 2007-01-02 22:29 ./source/a/dialog/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/dosfstools --rw-r--r-- 1 root root 68346 2005-03-12 16:33 ./source/a/dosfstools/dosfstools-2.11.src.tar.gz --rwxr-xr-x 1 root root 2605 2009-05-19 20:05 ./source/a/dosfstools/dosfstools.SlackBuild --rw-r--r-- 1 root root 742 2006-12-21 20:33 ./source/a/dosfstools/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-17 06:50 ./source/a/e2fsprogs --rw-r--r-- 1 root root 325 2009-05-30 01:25 ./source/a/e2fsprogs/doinst.sh.gz --rw-r--r-- 1 root root 3339836 2009-07-16 00:12 ./source/a/e2fsprogs/e2fsprogs-1.41.8.tar.xz --rwxr-xr-x 1 root root 4945 2009-07-17 06:41 ./source/a/e2fsprogs/e2fsprogs.SlackBuild --rw-r--r-- 1 root root 803 2009-05-30 01:25 ./source/a/e2fsprogs/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-12 20:59 ./source/a/ed --rw-r--r-- 1 root root 69427 2009-05-23 22:58 ./source/a/ed/ed-1.3.tar.bz2 --rwxr-xr-x 1 root root 3177 2009-06-12 21:01 ./source/a/ed/ed.SlackBuild --rw-r--r-- 1 root root 805 2006-12-13 23:11 ./source/a/ed/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/eject --rw-r--r-- 1 root root 107301 2006-06-04 19:58 ./source/a/eject/eject-2.1.5.tar.bz2 --rwxr-xr-x 1 root root 3093 2009-05-19 20:05 ./source/a/eject/eject.SlackBuild --rw-r--r-- 1 root root 886 2006-12-14 01:32 ./source/a/eject/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/elvis --rw-r--r-- 1 root root 1143603 2003-10-21 02:35 ./source/a/elvis/elvis-2.2_0.tar.bz2 --rwxr-xr-x 1 root root 3567 2009-05-19 20:05 ./source/a/elvis/elvis.SlackBuild --rw-r--r-- 1 root root 1633 2004-02-22 06:19 ./source/a/elvis/elvis.clr --rw-r--r-- 1 root root 1584 2003-10-21 02:32 ./source/a/elvis/elvis.clr.orig --rw-r--r-- 1 root root 845 2008-02-11 03:44 ./source/a/elvis/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-22 19:29 ./source/a/etc --rw-r--r-- 1 root root 31788 2009-08-22 19:29 ./source/a/etc/_etc.tar.gz --rwxr-xr-x 1 root root 1761 2009-08-22 19:42 ./source/a/etc/etc.SlackBuild --rw-r--r-- 1 root root 536 2002-10-11 20:17 ./source/a/etc/nsswitch.conf.gz --rw-r--r-- 1 root root 657 2002-03-23 21:54 ./source/a/etc/slack-desc --rw-r--r-- 1 root root 226973 2000-03-02 23:51 ./source/a/etc/termcap-BSD.gz -drwxr-xr-x 2 root root 4096 2009-06-12 23:07 ./source/a/file --rw-r--r-- 1 root root 471570 2009-05-06 20:52 ./source/a/file/file-5.03.tar.bz2 --rwxr-xr-x 1 root root 4399 2009-06-12 22:44 ./source/a/file/file.SlackBuild --rw-r--r-- 1 root root 195 2009-02-23 01:20 ./source/a/file/file.crdaregbin.magic.gz --rw-r--r-- 1 root root 212 2009-06-12 22:40 ./source/a/file/file.etc.file.diff.gz --rw-r--r-- 1 root root 336 2009-02-09 04:19 ./source/a/file/file.quiet.diff.gz --rw-r--r-- 1 root root 272 2009-02-09 04:17 ./source/a/file/file.short.diff.gz --rw-r--r-- 1 root root 248 2009-04-23 04:50 ./source/a/file/file.xz.magic.gz --rw-r--r-- 1 root root 214 2005-09-07 03:59 ./source/a/file/file.zisofs.magic.gz --rw-r--r-- 1 root root 680 2006-12-13 22:49 ./source/a/file/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-13 00:01 ./source/a/findutils --rw-r--r-- 1 root root 1114432 2009-06-06 14:38 ./source/a/findutils/findutils-4.4.2.tar.xz --rwxr-xr-x 1 root root 3575 2009-06-13 00:02 ./source/a/findutils/findutils.SlackBuild --rw-r--r-- 1 root root 186 2009-02-21 21:50 ./source/a/findutils/findutils.no.default.options.warnings.diff.gz --rw-r--r-- 1 root root 359 2009-02-21 21:19 ./source/a/findutils/findutils.nolocate.diff.gz --rw-r--r-- 1 root root 828 2002-04-07 10:22 ./source/a/findutils/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 02:17 ./source/a/floppy --rw-r--r-- 1 root root 25310 2002-05-01 02:18 ./source/a/floppy/fdutils-5.4-20020222.diff.gz --rw-r--r-- 1 root root 190535 2001-02-04 04:36 ./source/a/floppy/fdutils-5.4.tar.gz --rw-r--r-- 1 root root 182 2001-02-04 05:02 ./source/a/floppy/fdutils.mediaprm.diff.gz --rwxr-xr-x 1 root root 3386 2009-05-19 20:05 ./source/a/floppy/floppy.SlackBuild --rw-r--r-- 1 root root 11298 2002-05-01 02:21 ./source/a/floppy/mediaprm --rw-r--r-- 1 root root 286730 2001-05-27 12:42 ./source/a/floppy/mtools-3.9.8.tar.gz --rw-r--r-- 1 root root 1914 2001-02-04 04:50 ./source/a/floppy/mtools.conf --rw-r--r-- 1 root root 728 2002-03-23 21:55 ./source/a/floppy/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/gawk --rw-r--r-- 1 root root 1861630 2007-10-25 21:58 ./source/a/gawk/gawk-3.1.6.tar.bz2 --rw-r--r-- 1 root root 189 2007-10-25 21:58 ./source/a/gawk/gawk-3.1.6.tar.bz2.sig --rwxr-xr-x 1 root root 2901 2009-05-23 00:41 ./source/a/gawk/gawk.SlackBuild --rw-r--r-- 1 root root 1043 2002-03-23 21:56 ./source/a/gawk/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/genpower --rw-r--r-- 1 root root 66728 2005-01-04 22:32 ./source/a/genpower/genpower-1.0.5.tar.gz --rwxr-xr-x 1 root root 3077 2009-05-19 20:05 ./source/a/genpower/genpower.SlackBuild --rw-r--r-- 1 root root 514 2008-12-03 00:22 ./source/a/genpower/genpower.halt.diff.gz --rw-r--r-- 1 root root 460 2002-04-11 03:18 ./source/a/genpower/genpower.var.diff.gz --rw-r--r-- 1 root root 957 2002-04-11 05:06 ./source/a/genpower/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/gettext --rw-r--r-- 1 root root 8236607 2007-11-07 03:14 ./source/a/gettext/gettext-0.17.tar.bz2 --rwxr-xr-x 1 root root 3274 2009-05-22 22:33 ./source/a/gettext/gettext-tools.SlackBuild --rwxr-xr-x 1 root root 3106 2009-05-19 20:05 ./source/a/gettext/gettext.SlackBuild --rw-r--r-- 1 root root 737 2008-02-11 03:44 ./source/a/gettext/slack-desc --rw-r--r-- 1 root root 1093 2008-02-11 03:44 ./source/a/gettext/slack-desc.gettext-tools -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/getty-ps --rwxr-xr-x 1 root root 2667 2009-05-19 20:05 ./source/a/getty-ps/getty-ps.SlackBuild --rw-r--r-- 1 root root 3609 2005-07-21 12:27 ./source/a/getty-ps/getty.bugfixes.diff.gz --rw-r--r-- 1 root root 1223 2002-10-04 05:00 ./source/a/getty-ps/getty_ps-2.1.0.lsm --rw-r--r-- 1 root root 117414 2005-07-21 12:27 ./source/a/getty-ps/getty_ps-2.1.0b.tar.gz --rw-r--r-- 1 root root 969 2008-02-11 03:44 ./source/a/getty-ps/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/gpm --rw-r--r-- 1 root root 344 2004-10-13 20:51 ./source/a/gpm/gpm-1.20.1-consolename.patch.gz --rw-r--r-- 1 root root 404 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-gpmopen.patch.gz --rw-r--r-- 1 root root 274 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-idie.patch.gz --rw-r--r-- 1 root root 289 2006-12-12 02:00 ./source/a/gpm/gpm-1.20.1-input-defines.diff.gz --rw-r--r-- 1 root root 301 2004-09-23 18:46 ./source/a/gpm/gpm-1.20.1-input.patch.gz --rw-r--r-- 1 root root 362 2006-01-18 12:07 ./source/a/gpm/gpm-1.20.1-lib-silent.patch.gz --rw-r--r-- 1 root root 294 2004-09-09 05:51 ./source/a/gpm/gpm-1.20.1-math.patch.gz --rw-r--r-- 1 root root 791 2004-10-20 21:28 ./source/a/gpm/gpm-1.20.1-multilib.patch.gz --rw-r--r-- 1 root root 356 2006-01-18 12:07 ./source/a/gpm/gpm-1.20.1-no-console-error.patch.gz --rw-r--r-- 1 root root 249 2004-10-13 20:03 ./source/a/gpm/gpm-1.20.1-nodebug.patch.gz --rw-r--r-- 1 root root 237 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-subscript.patch.gz --rw-r--r-- 1 root root 515 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-weak-wgetch.patch.gz --rw-r--r-- 1 root root 651 2006-08-20 19:46 ./source/a/gpm/gpm-1.20.1.send-noise-to-syslogs.diff.gz --rw-r--r-- 1 root root 565014 2004-06-25 18:13 ./source/a/gpm/gpm-1.20.1.tar.bz2 --rw-r--r-- 1 root root 59408 2004-09-09 05:52 ./source/a/gpm/gpm-evdev-cumulative.patch.gz --rwxr-xr-x 1 root root 5475 2009-05-19 20:05 ./source/a/gpm/gpm.SlackBuild --rw-r--r-- 1 root root 285 2006-02-07 21:26 ./source/a/gpm/gpm.evdevmakefile.patch.gz --rw-r--r-- 1 root root 4268 2004-09-09 05:52 ./source/a/gpm/inputattach.c.gz --rw-r--r-- 1 root root 168 2001-04-15 23:47 ./source/a/gpm/mouseconfig.gz --rw-r--r-- 1 root root 2117 2008-03-15 20:30 ./source/a/gpm/setup.mouse.gz --rw-r--r-- 1 root root 965 2002-05-29 01:05 ./source/a/gpm/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/grep --rw-r--r-- 1 root root 723181 2009-02-10 13:58 ./source/a/grep/grep-2.5.4.tar.bz2 --rwxr-xr-x 1 root root 3292 2009-05-19 20:05 ./source/a/grep/grep.SlackBuild --rw-r--r-- 1 root root 747 2002-04-02 08:53 ./source/a/grep/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/gzip --rw-r--r-- 1 root root 383783 2007-04-14 02:32 ./source/a/gzip/gzip-1.3.12.tar.bz2 --rw-r--r-- 1 root root 189 2007-04-14 02:32 ./source/a/gzip/gzip-1.3.12.tar.sig --rwxr-xr-x 1 root root 4295 2009-05-19 20:05 ./source/a/gzip/gzip.SlackBuild --rw-r--r-- 1 root root 770 2002-03-23 21:58 ./source/a/gzip/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/hdparm --rw-r--r-- 1 root root 82912 2008-11-04 18:01 ./source/a/hdparm/hdparm-9.3.tar.bz2 --rwxr-xr-x 1 root root 2226 2009-05-19 20:05 ./source/a/hdparm/hdparm.SlackBuild --rw-r--r-- 1 root root 805 2002-02-22 00:10 ./source/a/hdparm/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-24 08:47 ./source/a/infozip --rwxr-xr-x 1 root root 3159 2009-08-24 08:48 ./source/a/infozip/infozip.SlackBuild --rw-r--r-- 1 root root 924 2002-03-29 01:12 ./source/a/infozip/slack-desc --rw-r--r-- 1 root root 882180 2009-01-02 16:33 ./source/a/infozip/unzip60.tar.xz --rw-r--r-- 1 root root 775420 2008-07-05 17:31 ./source/a/infozip/zip30.tar.xz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/inotify-tools --rw-r--r-- 1 root root 283893 2008-01-01 08:51 ./source/a/inotify-tools/inotify-tools-3.13.tar.bz2 --rwxr-xr-x 1 root root 3344 2009-05-19 20:05 ./source/a/inotify-tools/inotify-tools.SlackBuild --rw-r--r-- 1 root root 977 2008-02-11 03:44 ./source/a/inotify-tools/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-12 23:20 ./source/a/jfsutils --rw-r--r-- 1 root root 414662 2009-04-06 19:17 ./source/a/jfsutils/jfsutils-1.1.14.tar.bz2 --rwxr-xr-x 1 root root 3047 2009-06-12 23:20 ./source/a/jfsutils/jfsutils.SlackBuild --rw-r--r-- 1 root root 998 2003-02-16 21:43 ./source/a/jfsutils/slack-desc -drwxr-xr-x 3 root root 4096 2009-05-16 19:10 ./source/a/kbd --rwxr-xr-x 1 root root 5901 2009-08-25 01:23 ./source/a/kbd/kbd.SlackBuild --rw-r--r-- 1 root root 11611 2009-05-16 22:41 ./source/a/kbd/setconsolefont --rw-r--r-- 1 root root 283 2009-05-14 19:13 ./source/a/kbd/setup.setconsolefont --rw-r--r-- 1 root root 919 2003-02-27 23:42 ./source/a/kbd/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-25 01:23 ./source/a/kbd/sources --rw-r--r-- 1 root root 24797 2001-05-26 05:49 ./source/a/kbd/sources/extraf.tgz --rw-r--r-- 1 root root 960 2009-01-08 14:46 ./source/a/kbd/sources/kbd-1.15-keycodes-man.patch.gz --rw-r--r-- 1 root root 522 2009-01-08 14:46 ./source/a/kbd/sources/kbd-1.15-po.patch.gz --rw-r--r-- 1 root root 659 2009-03-05 12:52 ./source/a/kbd/sources/kbd-1.15-quiet_doc.patch.gz --rw-r--r-- 1 root root 270 2009-01-08 14:46 ./source/a/kbd/sources/kbd-1.15-resizecon-x86_64.patch.gz --rw-r--r-- 1 root root 1243 2009-01-08 14:46 ./source/a/kbd/sources/kbd-1.15-sparc.patch.gz --rw-r--r-- 1 root root 399 2009-08-25 01:23 ./source/a/kbd/sources/kbd-1.15-unicode_start.patch.gz --rw-r--r-- 1 root root 875463 2008-12-01 19:58 ./source/a/kbd/sources/kbd-1.15.tar.bz2 --rw-r--r-- 1 root root 248 2008-12-01 19:58 ./source/a/kbd/sources/kbd-1.15.tar.bz2.sign --rw-r--r-- 1 root root 4291 2007-10-15 12:16 ./source/a/kbd/sources/kbd-latarcyrheb-16-fixed.tar.bz2 --rw-r--r-- 1 root root 6155 2006-09-29 11:13 ./source/a/kbd/sources/kbd-latsun-fonts.tar.bz2 --rw-r--r-- 1 root root 224 2004-05-30 04:18 ./source/a/kbd/sources/nl.euro.diff.gz --rw-r--r-- 1 root root 2338 2007-11-14 11:41 ./source/a/kbd/sources/ro_maps.tar.bz2 --rw-r--r-- 1 root root 3543 2002-05-24 21:22 ./source/a/kbd/sources/speakup-jfw.tar.gz --rw-r--r-- 1 root root 2246 2001-10-05 13:14 ./source/a/kbd/sources/speakupmap.map.gz -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/less --rw-r--r-- 1 root root 241227 2008-01-08 22:20 ./source/a/less/less-418.tar.bz2 --rwxr-xr-x 1 root root 3097 2009-05-23 00:41 ./source/a/less/less.SlackBuild --rw-r--r-- 1 root root 313 2002-05-28 00:15 ./source/a/less/less.sysconfdir.diff.gz --rw-r--r-- 1 root root 1343 2009-04-11 17:48 ./source/a/less/lesspipe.sh.gz --rw-r--r-- 1 root root 841 2002-03-23 22:00 ./source/a/less/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/lha --rw-r--r-- 1 root root 64608 2000-12-15 12:20 ./source/a/lha/lha-114i.tar.gz --rwxr-xr-x 1 root root 2533 2009-05-19 20:05 ./source/a/lha/lha.SlackBuild --rw-r--r-- 1 root root 45132 2006-12-13 19:47 ./source/a/lha/lha_1.14i-10.1.diff.gz --rw-r--r-- 1 root root 606 2006-12-23 05:46 ./source/a/lha/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/lilo --rw-r--r-- 1 root root 437555 2007-02-19 18:18 ./source/a/lilo/lilo-22.8.src.tar.gz --rw-r--r-- 1 root root 536 2007-02-19 18:18 ./source/a/lilo/lilo-22.8.src.tar.gz.sig --rwxr-xr-x 1 root root 2785 2009-05-19 20:05 ./source/a/lilo/lilo.SlackBuild --rw-r--r-- 1 root root 38380 2009-02-23 11:00 ./source/a/lilo/liloconfig --rw-r--r-- 1 root root 105 2002-03-09 08:27 ./source/a/lilo/setup.liloconfig --rw-r--r-- 1 root root 1045 2002-03-23 22:00 ./source/a/lilo/slack-desc --rw-r--r-- 1 root root 15754 2008-02-22 00:08 ./source/a/lilo/slack.bmp --rw-r--r-- 1 root root 133 2008-02-22 00:08 ./source/a/lilo/slack.dat --rw-r--r-- 1 root root 17318 2008-12-09 00:56 ./source/a/lilo/slack64.bmp --rw-r--r-- 1 root root 3331 1994-07-08 18:55 ./source/a/lilo/text.lilohelp -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/logrotate --rw-r--r-- 1 root root 1258 2006-09-21 06:38 ./source/a/logrotate/_logrotate.tar.gz --rw-r--r-- 1 root root 38611 2006-07-24 12:13 ./source/a/logrotate/logrotate-3.7.4.tar.gz --rwxr-xr-x 1 root root 2255 2009-05-19 20:05 ./source/a/logrotate/logrotate.SlackBuild --rw-r--r-- 1 root root 775 2006-09-21 06:09 ./source/a/logrotate/logrotate.slackware.diff.gz --rw-r--r-- 1 root root 989 2002-04-07 06:41 ./source/a/logrotate/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 02:17 ./source/a/lvm2 --rw-r--r-- 1 root root 474231 2008-10-06 12:21 ./source/a/lvm2/LVM2.2.02.40.tar.bz2 --rw-r--r-- 1 root root 271 2008-10-06 12:21 ./source/a/lvm2/doinst.sh.gz --rwxr-xr-x 1 root root 3093 2009-05-19 20:05 ./source/a/lvm2/lvm2.SlackBuild --rw-r--r-- 1 root root 1012 2008-02-08 17:26 ./source/a/lvm2/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/mdadm --rw-r--r-- 1 root root 261 2004-05-27 18:31 ./source/a/mdadm/doinst.sh.gz --rw-r--r-- 1 root root 152401 2007-10-19 04:12 ./source/a/mdadm/mdadm-2.6.4.tar.bz2 --rw-r--r-- 1 root root 248 2007-10-19 04:12 ./source/a/mdadm/mdadm-2.6.4.tar.bz2.sign --rwxr-xr-x 1 root root 2543 2009-05-19 20:05 ./source/a/mdadm/mdadm.SlackBuild --rw-r--r-- 1 root root 347 2006-06-25 05:30 ./source/a/mdadm/mdadm.static.small.diff.gz --rw-r--r-- 1 root root 928 2004-05-27 18:23 ./source/a/mdadm/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/minicom --rw-r--r-- 1 root root 503 2008-09-30 10:20 ./source/a/minicom/config.sub-x86_64.diff.gz --rw-r--r-- 1 root root 289 2004-09-04 21:22 ./source/a/minicom/doinst.sh.gz --rw-r--r-- 1 root root 16580 2001-03-25 19:17 ./source/a/minicom/lrzsz_0.12.21-4.diff.gz --rw-r--r-- 1 root root 287790 1999-09-19 19:01 ./source/a/minicom/lrzsz_0.12.21.orig.tar.gz --rw-r--r-- 1 root root 607939 2003-09-17 21:55 ./source/a/minicom/minicom-2.1.tar.gz --rw-r--r-- 1 root root 189 2003-09-17 21:54 ./source/a/minicom/minicom-2.1.tar.gz.asc --rwxr-xr-x 1 root root 4338 2009-05-23 00:41 ./source/a/minicom/minicom.SlackBuild --rw-r--r-- 1 root root 570 2004-09-04 21:17 ./source/a/minicom/minicom.users.gz --rw-r--r-- 1 root root 92 2004-09-04 21:16 ./source/a/minicom/minirc.dfl.gz --rw-r--r-- 1 root root 781 2002-03-29 01:13 ./source/a/minicom/slack-desc --rw-r--r-- 1 root root 568 2008-10-02 19:18 ./source/a/minicom/wintcap.diff.gz -drwxr-xr-x 3 root root 4096 2009-07-15 19:16 ./source/a/mkinitrd --rw-r--r-- 1 root root 3723 2009-06-17 06:49 ./source/a/mkinitrd/README.initrd --rw-r--r-- 1 root root 2386 2009-04-21 03:21 ./source/a/mkinitrd/_initrd-tree.tar.gz -drwxr-xr-x 2 root root 4096 2008-11-30 10:20 ./source/a/mkinitrd/archive --rw-r--r-- 1 root root 1924980 2008-08-21 19:40 ./source/a/mkinitrd/archive/busybox-1.11.2.tar.bz2 --rw-r--r-- 1 root root 2017989 2008-08-20 23:27 ./source/a/mkinitrd/archive/busybox-1.12.0.tar.bz2 --rw-r--r-- 1 root root 280 2007-11-27 21:36 ./source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff.gz --rw-r--r-- 1 root root 470 2007-10-09 23:51 ./source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff.gz --rw-r--r-- 1 root root 1729040 2007-10-09 23:52 ./source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2 --rw-r--r-- 1 root root 535 2007-10-09 23:52 ./source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2.sign --rw-r--r-- 1 root root 20223 2008-09-23 21:26 ./source/a/mkinitrd/archive/busybox-dot-config.1.11.2 --rw-r--r-- 1 root root 20380 2008-09-25 10:39 ./source/a/mkinitrd/archive/busybox-dot-config.1.12.0 --rw-r--r-- 1 root root 20369 2008-11-07 10:25 ./source/a/mkinitrd/archive/busybox-dot-config.1.12.1 --rw-r--r-- 1 root root 17000 2008-04-03 23:06 ./source/a/mkinitrd/archive/busybox-dot-config.1.7.2 --rw-r--r-- 1 root root 2022321 2008-09-28 18:08 ./source/a/mkinitrd/busybox-1.12.1.tar.bz2 --rw-r--r-- 1 root root 218 2008-11-07 01:40 ./source/a/mkinitrd/busybox-1.12.1_inotify.diff.gz --rw-r--r-- 1 root root 20369 2008-11-30 10:19 ./source/a/mkinitrd/busybox-dot-config --rwxr-xr-x 1 root root 7749 2009-04-02 22:13 ./source/a/mkinitrd/init --rw-r--r-- 1 root root 29903 2009-05-17 07:21 ./source/a/mkinitrd/keymaps.tar.gz --rw-r--r-- 1 root root 16243 2009-08-13 19:41 ./source/a/mkinitrd/mkinitrd --rw-r--r-- 1 root root 5889 2008-04-20 05:17 ./source/a/mkinitrd/mkinitrd.8 --rwxr-xr-x 1 root root 4150 2009-08-13 20:00 ./source/a/mkinitrd/mkinitrd.SlackBuild --rw-r--r-- 1 root root 4227 2008-12-19 13:11 ./source/a/mkinitrd/mkinitrd.conf.5 --rw-r--r-- 1 root root 343 2008-04-03 23:06 ./source/a/mkinitrd/mkinitrd.conf.sample --rw-r--r-- 1 root root 27049 2009-05-17 07:21 ./source/a/mkinitrd/mkinitrd_command_generator.sh --rw-r--r-- 1 root root 454 2008-12-11 11:02 ./source/a/mkinitrd/mkinitrd_kernelcheck.diff --rw-r--r-- 1 root root 988 2008-04-03 23:07 ./source/a/mkinitrd/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/module-init-tools --rw-r--r-- 1 root root 467 2007-09-24 14:55 ./source/a/module-init-tools/doinst.sh.gz --rw-r--r-- 1 root root 642 2009-02-08 07:43 ./source/a/module-init-tools/modprobe.favor.etc.modprobe.d.diff.gz --rw-r--r-- 1 root root 801 2009-02-08 07:58 ./source/a/module-init-tools/modprobe.ignore_some_suffixes.diff.gz --rw-r--r-- 1 root root 960 2009-03-13 11:48 ./source/a/module-init-tools/modprobe.no_sys_check.diff.gz --rw-r--r-- 1 root root 230327 2009-02-04 21:30 ./source/a/module-init-tools/module-init-tools-3.6.tar.bz2 --rwxr-xr-x 1 root root 4097 2009-05-19 20:05 ./source/a/module-init-tools/module-init-tools.SlackBuild --rw-r--r-- 1 root root 856 2007-02-21 20:22 ./source/a/module-init-tools/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/mt-st --rw-r--r-- 1 root root 375 2007-05-15 02:19 ./source/a/mt-st/_mt-st.tar.gz --rw-r--r-- 1 root root 36537 2005-08-21 19:14 ./source/a/mt-st/mt-st-0.9b.tar.gz --rwxr-xr-x 1 root root 2702 2009-05-19 20:05 ./source/a/mt-st/mt-st.SlackBuild --rw-r--r-- 1 root root 949 2005-04-07 06:26 ./source/a/mt-st/mt-st.config.diff.gz --rw-r--r-- 1 root root 358 2005-10-25 10:17 ./source/a/mt-st/mt-st.man.diff.gz --rw-r--r-- 1 root root 236 2004-09-09 08:51 ./source/a/mt-st/mt-st.sdlt.diff.gz --rw-r--r-- 1 root root 943 2002-02-24 20:29 ./source/a/mt-st/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/mtx --rw-r--r-- 1 root root 220990 2007-01-25 23:16 ./source/a/mtx/mtx-1.3.9.tar.gz --rwxr-xr-x 1 root root 2745 2009-05-19 20:05 ./source/a/mtx/mtx.SlackBuild --rw-r--r-- 1 root root 854 2007-01-25 23:21 ./source/a/mtx/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/ncompress --rw-r--r-- 1 root root 304 2006-08-11 11:44 ./source/a/ncompress/ncompress-4.2.4-bssUnderflow.patch.gz --rw-r--r-- 1 root root 207 2006-09-19 12:34 ./source/a/ncompress/ncompress-4.2.4-endians.patch.gz --rw-r--r-- 1 root root 32533 1996-12-24 07:00 ./source/a/ncompress/ncompress-4.2.4.tar.gz --rw-r--r-- 1 root root 220 2004-10-05 09:15 ./source/a/ncompress/ncompress.2GB.diff.gz --rwxr-xr-x 1 root root 3100 2009-05-19 20:05 ./source/a/ncompress/ncompress.SlackBuild --rw-r--r-- 1 root root 1164 2004-09-09 09:01 ./source/a/ncompress/ncompress.filenamelen.diff.gz --rw-r--r-- 1 root root 773 2004-09-09 09:01 ./source/a/ncompress/ncompress.lfs2.diff.gz --rw-r--r-- 1 root root 952 2004-09-09 09:00 ./source/a/ncompress/ncompress.make.diff.gz --rw-r--r-- 1 root root 389 2006-04-21 12:20 ./source/a/ncompress/ncompress.zerobyteforce.diff.gz --rw-r--r-- 1 root root 1020 2006-12-14 01:48 ./source/a/ncompress/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-12 23:23 ./source/a/ntfs-3g --rw-r--r-- 1 root root 481 2008-03-15 01:38 ./source/a/ntfs-3g/10-ntfs-3g-policy.fdi --rw-r--r-- 1 root root 492893 2009-04-02 23:01 ./source/a/ntfs-3g/ntfs-3g-2009.4.4.tar.bz2 --rwxr-xr-x 1 root root 3350 2009-06-12 23:23 ./source/a/ntfs-3g/ntfs-3g.SlackBuild --rw-r--r-- 1 root root 1003 2008-03-15 03:46 ./source/a/ntfs-3g/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/patch --rw-r--r-- 1 root root 186879 1999-08-31 09:17 ./source/a/patch/patch-2.5.4.tar.gz --rwxr-xr-x 1 root root 2191 2009-05-19 20:05 ./source/a/patch/patch.SlackBuild --rw-r--r-- 1 root root 1020 2006-12-14 02:21 ./source/a/patch/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-29 07:48 ./source/a/pciutils --rw-r--r-- 1 root root 271733 2009-07-29 07:19 ./source/a/pciutils/pciutils-3.1.3.tar.bz2 --rwxr-xr-x 1 root root 3190 2009-08-09 02:53 ./source/a/pciutils/pciutils.SlackBuild --rw-r--r-- 1 root root 306 2009-07-29 07:26 ./source/a/pciutils/pciutils.ids.dest.diff.gz --rw-r--r-- 1 root root 92 2008-04-01 21:00 ./source/a/pciutils/pciutils.url --rw-r--r-- 1 root root 895 2006-12-19 23:55 ./source/a/pciutils/slack-desc -drwxr-xr-x 3 root root 4096 2009-05-23 02:18 ./source/a/pcmciautils --rw-r--r-- 1 root root 1429 2007-03-16 14:50 ./source/a/pcmciautils/cis-cs-3.2.8.tar.gz -drwxr-xr-x 2 root root 4096 2008-09-12 04:35 ./source/a/pcmciautils/config --rw-r--r-- 1 root root 926 2007-03-16 20:00 ./source/a/pcmciautils/config/60-pcmcia.rules --rw-r--r-- 1 root root 2577 2008-03-05 03:14 ./source/a/pcmciautils/config/config.opts --rwxr-xr-x 1 root root 1722 2007-03-16 21:09 ./source/a/pcmciautils/config/rc.pcmcia --rw-r--r-- 1 root root 277 2009-04-14 04:38 ./source/a/pcmciautils/doinst.sh.gz --rw-r--r-- 1 root root 43239 2008-07-15 04:16 ./source/a/pcmciautils/pcmciautils-015.tar.bz2 --rwxr-xr-x 1 root root 3555 2009-05-19 20:05 ./source/a/pcmciautils/pcmciautils.SlackBuild --rw-r--r-- 1 root root 914 2009-04-14 04:35 ./source/a/pcmciautils/slack-desc -drwxr-xr-x 5 root root 4096 2009-05-19 20:05 ./source/a/pkgtools -drwxr-xr-x 2 root root 4096 2009-04-11 21:15 ./source/a/pkgtools/manpages --rw-r--r-- 1 root root 1256 2009-04-11 20:54 ./source/a/pkgtools/manpages/explodepkg.8 --rw-r--r-- 1 root root 2561 2009-04-11 20:52 ./source/a/pkgtools/manpages/installpkg.8 --rw-r--r-- 1 root root 4557 2009-04-11 20:51 ./source/a/pkgtools/manpages/makepkg.8 --rw-r--r-- 1 root root 2518 2009-04-11 21:11 ./source/a/pkgtools/manpages/pkgtool.8 --rw-r--r-- 1 root root 3080 2009-04-11 21:15 ./source/a/pkgtools/manpages/removepkg.8 --rw-r--r-- 1 root root 3199 2001-06-07 08:29 ./source/a/pkgtools/manpages/setup.8-deprecated --rw-r--r-- 1 root root 2665 2009-04-11 21:14 ./source/a/pkgtools/manpages/upgradepkg.8 -drwxr-xr-x 2 root root 4096 2008-04-19 23:44 ./source/a/pkgtools/obsolete-scripts --rw-r--r-- 1 root root 155 2008-04-19 23:44 ./source/a/pkgtools/obsolete-scripts/README --rw-r--r-- 1 root root 1326 2003-02-16 00:57 ./source/a/pkgtools/obsolete-scripts/setup.90.modem-device --rwxr-xr-x 1 root root 2483 2009-08-16 21:35 ./source/a/pkgtools/pkgtools.SlackBuild -drwxr-xr-x 2 root root 4096 2009-06-02 04:12 ./source/a/pkgtools/scripts --rw-r--r-- 1 root root 3170 2009-04-06 02:21 ./source/a/pkgtools/scripts/explodepkg --rw-r--r-- 1 root root 19653 2009-08-16 21:22 ./source/a/pkgtools/scripts/installpkg --rw-r--r-- 1 root root 13749 2009-04-06 02:14 ./source/a/pkgtools/scripts/makebootdisk --rw-r--r-- 1 root root 11315 2009-06-02 04:12 ./source/a/pkgtools/scripts/makepkg --rw-r--r-- 1 root root 22615 2009-06-18 02:24 ./source/a/pkgtools/scripts/pkgtool --rw-r--r-- 1 root root 14048 2009-04-28 20:44 ./source/a/pkgtools/scripts/removepkg --rw-r--r-- 1 root root 170 2003-02-16 00:56 ./source/a/pkgtools/scripts/setup.70.install-kernel --rw-r--r-- 1 root root 6356 2008-03-18 19:39 ./source/a/pkgtools/scripts/setup.80.make-bootdisk --rw-r--r-- 1 root root 1070 2007-06-27 00:28 ./source/a/pkgtools/scripts/setup.htmlview --rw-r--r-- 1 root root 7421 2008-03-19 08:13 ./source/a/pkgtools/scripts/setup.services --rw-r--r-- 1 root root 12087 2009-08-16 21:38 ./source/a/pkgtools/scripts/upgradepkg --rw-r--r-- 1 root root 1083 2002-03-23 04:15 ./source/a/pkgtools/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/procps --rw-r--r-- 1 root root 24365 2001-03-02 18:54 ./source/a/procps/procinfo-18.tar.gz --rw-r--r-- 1 root root 213 2003-02-07 21:39 ./source/a/procps/procinfo.gcc3.diff.gz --rw-r--r-- 1 root root 504 2001-03-02 18:54 ./source/a/procps/procinfo.lsm --rw-r--r-- 1 root root 824 2008-09-19 19:04 ./source/a/procps/procps-3.2.7-ps-eip64.diff.gz --rw-r--r-- 1 root root 281965 2006-06-25 06:14 ./source/a/procps/procps-3.2.7.tar.gz --rwxr-xr-x 1 root root 6216 2009-05-23 00:41 ./source/a/procps/procps.SlackBuild --rw-r--r-- 1 root root 854 2004-08-17 01:30 ./source/a/procps/procps.nowarning.diff.gz --rw-r--r-- 1 root root 182 2003-02-02 19:47 ./source/a/procps/procps.w.showfrom.diff.gz --rw-r--r-- 1 root root 257325 2006-09-14 23:06 ./source/a/procps/psmisc-22.3.tar.gz --rw-r--r-- 1 root root 739 2004-05-27 21:01 ./source/a/procps/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-22 20:00 ./source/a/quota --rw-r--r-- 1 root root 216356 2009-01-05 14:29 ./source/a/quota/quota-3.17.tar.xz --rwxr-xr-x 1 root root 3539 2009-06-22 19:58 ./source/a/quota/quota.SlackBuild --rw-r--r-- 1 root root 980 2002-03-31 08:30 ./source/a/quota/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/reiserfsprogs --rw-r--r-- 1 root root 324847 2009-01-12 22:13 ./source/a/reiserfsprogs/reiserfsprogs-3.6.21.tar.bz2 --rwxr-xr-x 1 root root 3507 2009-05-19 20:05 ./source/a/reiserfsprogs/reiserfsprogs.SlackBuild --rw-r--r-- 1 root root 940 2008-02-11 03:44 ./source/a/reiserfsprogs/slack-desc -drwxr-xr-x 2 root root 4096 2006-12-23 06:44 ./source/a/rpm2tgz --rw-r--r-- 1 root root 1809 2002-11-27 21:47 ./source/a/rpm2tgz/getrpmtype.tar.gz --rw-r--r-- 1 root root 4439 2009-08-08 22:26 ./source/a/rpm2tgz/rpm2targz --rw-r--r-- 1 root root 986 2006-12-23 06:51 ./source/a/rpm2tgz/rpm2targz.README --rwxr-xr-x 1 root root 2128 2009-08-08 22:50 ./source/a/rpm2tgz/rpm2tgz.SlackBuild --rw-r--r-- 1 root root 835 2004-06-13 23:10 ./source/a/rpm2tgz/rpmoffset.c --rw-r--r-- 1 root root 856 2008-02-11 03:44 ./source/a/rpm2tgz/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sdparm --rw-r--r-- 1 root root 195605 2007-04-07 21:15 ./source/a/sdparm/sdparm-1.01.tar.bz2 --rwxr-xr-x 1 root root 3176 2009-05-19 20:05 ./source/a/sdparm/sdparm.SlackBuild --rw-r--r-- 1 root root 924 2007-06-02 18:27 ./source/a/sdparm/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sed --rw-r--r-- 1 root root 799584 2006-02-03 09:51 ./source/a/sed/sed-4.1.5.tar.gz --rw-r--r-- 1 root root 65 2006-02-03 09:51 ./source/a/sed/sed-4.1.5.tar.gz.sig --rwxr-xr-x 1 root root 2485 2009-05-19 20:05 ./source/a/sed/sed.SlackBuild --rw-r--r-- 1 root root 862 2003-09-01 21:35 ./source/a/sed/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/a/shadow --rw-r--r-- 1 root root 1293 2006-08-22 20:06 ./source/a/shadow/_shadow.tar.gz --rw-r--r-- 1 root root 15448 2009-08-01 01:59 ./source/a/shadow/adduser --rw-r--r-- 1 root root 778357 2002-03-14 04:27 ./source/a/shadow/shadow-4.0.3.tar.bz2 --rw-r--r-- 1 root root 1471 2008-11-30 19:01 ./source/a/shadow/shadow-4.0.3.x86_64.diff.gz --rwxr-xr-x 1 root root 5002 2009-08-01 00:25 ./source/a/shadow/shadow.SlackBuild --rw-r--r-- 1 root root 178 2006-08-13 00:03 ./source/a/shadow/shadow.gcc34.diff.gz --rw-r--r-- 1 root root 1108 2008-03-24 20:11 ./source/a/shadow/shadow.login.defs.diff.gz --rw-r--r-- 1 root root 353 2003-06-01 04:21 ./source/a/shadow/shadow.newgrp.getlogin.gz --rw-r--r-- 1 root root 366 2002-10-13 19:47 ./source/a/shadow/shadow.newgrp.nopam.gz --rw-r--r-- 1 root root 1248 2006-08-20 23:32 ./source/a/shadow/shadow.remove.obsolete.options.diff.gz --rw-r--r-- 1 root root 657 2003-06-23 23:35 ./source/a/shadow/shadow.shadowconfig.diff.gz --rw-r--r-- 1 root root 993 2002-04-30 23:51 ./source/a/shadow/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-22 18:47 ./source/a/sharutils --rw-r--r-- 1 root root 640932 2007-07-01 12:05 ./source/a/sharutils/sharutils-4.7.tar.bz2 --rw-r--r-- 1 root root 65 2007-07-01 12:05 ./source/a/sharutils/sharutils-4.7.tar.bz2.sig --rwxr-xr-x 1 root root 2632 2009-06-22 18:50 ./source/a/sharutils/sharutils.SlackBuild --rw-r--r-- 1 root root 1087 2006-05-19 01:57 ./source/a/sharutils/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-30 19:16 ./source/a/slocate --rw-r--r-- 1 root root 941 2009-07-18 00:05 ./source/a/slocate/_slocate.tar.gz --rw-r--r-- 1 root root 1011 2002-04-07 09:50 ./source/a/slocate/slack-desc --rw-r--r-- 1 root root 37748 2006-03-08 05:05 ./source/a/slocate/slocate-3.1.tar.gz --rw-r--r-- 1 root root 189 2006-03-08 05:05 ./source/a/slocate/slocate-3.1.tar.gz.sign --rwxr-xr-x 1 root root 2430 2009-07-18 00:43 ./source/a/slocate/slocate.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/smartmontools --rw-r--r-- 1 root root 270 2004-04-12 02:03 ./source/a/smartmontools/doinst.sh.gz --rw-r--r-- 1 root root 1174 2002-10-21 22:55 ./source/a/smartmontools/slack-desc --rw-r--r-- 1 root root 500392 2008-03-10 11:08 ./source/a/smartmontools/smartmontools-5.38.tar.bz2 --rwxr-xr-x 1 root root 2485 2009-05-19 20:05 ./source/a/smartmontools/smartmontools.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/splitvt --rw-r--r-- 1 root root 743 2006-12-13 23:26 ./source/a/splitvt/slack-desc --rw-r--r-- 1 root root 64301 2001-01-18 07:58 ./source/a/splitvt/splitvt-1.6.5.tar.gz --rwxr-xr-x 1 root root 2281 2009-05-19 20:05 ./source/a/splitvt/splitvt.SlackBuild --rw-r--r-- 1 root root 10403 2005-07-19 22:17 ./source/a/splitvt/splitvt_1.6.5-9.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sysfsutils --rw-r--r-- 1 root root 1005 2006-08-03 23:45 ./source/a/sysfsutils/slack-desc --rw-r--r-- 1 root root 288189 2006-12-12 01:33 ./source/a/sysfsutils/sysfsutils-2.1.0.tar.bz2 --rwxr-xr-x 1 root root 3195 2009-05-19 20:05 ./source/a/sysfsutils/sysfsutils.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sysklogd --rw-r--r-- 1 root root 2289 2007-04-09 23:11 ./source/a/sysklogd/_sysklogd.tar.gz --rw-r--r-- 1 root root 916 2002-03-23 22:05 ./source/a/sysklogd/slack-desc --rw-r--r-- 1 root root 862 2007-04-09 23:25 ./source/a/sysklogd/sysklogd-1.4.1-owl-syslogd-crunch_list.diff.gz --rw-r--r-- 1 root root 1197 2001-03-11 21:33 ./source/a/sysklogd/sysklogd-1.4.1.lsm --rw-r--r-- 1 root root 81784 2001-03-11 21:33 ./source/a/sysklogd/sysklogd-1.4.1.tar.gz --rwxr-xr-x 1 root root 2850 2009-05-19 20:05 ./source/a/sysklogd/sysklogd.SlackBuild --rw-r--r-- 1 root root 26587 2006-09-28 21:52 ./source/a/sysklogd/sysklogd_1.4.1-20.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/syslinux --rw-r--r-- 1 root root 977 2002-03-22 08:06 ./source/a/syslinux/slack-desc --rw-r--r-- 1 root root 1691659 2007-09-25 23:37 ./source/a/syslinux/syslinux-3.52.tar.bz2 --rw-r--r-- 1 root root 248 2007-09-25 23:37 ./source/a/syslinux/syslinux-3.52.tar.bz2.sign --rwxr-xr-x 1 root root 2829 2009-05-19 20:05 ./source/a/syslinux/syslinux.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sysvinit -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sysvinit-functions --rw-r--r-- 1 root root 832 2007-04-29 18:51 ./source/a/sysvinit-functions/README.functions --rw-r--r-- 1 root root 226 2007-05-15 02:38 ./source/a/sysvinit-functions/doinst.sh.gz --rw-r--r-- 1 root root 10001 2007-04-29 18:21 ./source/a/sysvinit-functions/function-src-8.53.tar.bz2 --rw-r--r-- 1 root root 13913 2006-10-26 20:57 ./source/a/sysvinit-functions/functions --rw-r--r-- 1 root root 1164 2007-05-15 02:46 ./source/a/sysvinit-functions/slack-desc --rwxr-xr-x 1 root root 3054 2009-05-19 20:05 ./source/a/sysvinit-functions/sysvinit-functions.SlackBuild -drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/a/sysvinit-scripts --rw-r--r-- 1 root root 339 2008-03-19 08:28 ./source/a/sysvinit-scripts/doinst.sh.gz -drwxr-xr-x 2 root root 4096 2008-03-31 03:07 ./source/a/sysvinit-scripts/scripts --rw-r--r-- 1 root root 60 2006-08-01 03:00 ./source/a/sysvinit-scripts/scripts/fetch-rescan-scsi-bus.sh --rw-r--r-- 1 root root 2467 2006-07-26 23:41 ./source/a/sysvinit-scripts/scripts/inittab --rw-r--r-- 1 root root 1282 2007-03-27 01:12 ./source/a/sysvinit-scripts/scripts/rc.4 --rw-r--r-- 1 root root 7453 2008-12-02 20:32 ./source/a/sysvinit-scripts/scripts/rc.6 --rw-r--r-- 1 root root 2425 2008-12-02 20:31 ./source/a/sysvinit-scripts/scripts/rc.K --rw-r--r-- 1 root root 10906 2009-04-25 22:01 ./source/a/sysvinit-scripts/scripts/rc.M --rw-r--r-- 1 root root 14253 2009-04-22 02:48 ./source/a/sysvinit-scripts/scripts/rc.S --rw-r--r-- 1 root root 272 2006-08-12 02:07 ./source/a/sysvinit-scripts/scripts/rc.local --rw-r--r-- 1 root root 1740 1999-09-11 20:48 ./source/a/sysvinit-scripts/scripts/rc.sysvinit --rw-r--r-- 1 root root 15654 2008-10-29 10:07 ./source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh --rw-r--r-- 1 root root 846 2007-05-15 02:47 ./source/a/sysvinit-scripts/slack-desc --rwxr-xr-x 1 root root 2177 2009-07-18 01:39 ./source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild --rw-r--r-- 1 root root 681 2007-04-16 19:42 ./source/a/sysvinit/doinst.sh.gz --rw-r--r-- 1 root root 972 2002-03-22 05:59 ./source/a/sysvinit/slack-desc --rw-r--r-- 1 root root 489 2008-09-22 09:55 ./source/a/sysvinit/sysvinit-2.86-timeval.patch.gz --rw-r--r-- 1 root root 99009 2006-12-08 20:10 ./source/a/sysvinit/sysvinit-2.86.tar.gz --rwxr-xr-x 1 root root 3836 2009-05-19 20:05 ./source/a/sysvinit/sysvinit.SlackBuild --rw-r--r-- 1 root root 1729 2008-04-03 02:33 ./source/a/sysvinit/sysvinit.diff.gz --rw-r--r-- 1 root root 1107 2005-12-19 21:12 ./source/a/sysvinit/sysvinit.pidof.rhforkseverything.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/tar --rw-r--r-- 1 root root 2429 1995-01-07 08:18 ./source/a/tar/rmt.8.gz --rw-r--r-- 1 root root 834 2002-03-23 22:06 ./source/a/tar/slack-desc --rw-r--r-- 1 root root 949 2006-11-30 21:52 ./source/a/tar/tar-1.13.bzip2.diff.gz --rw-r--r-- 1 root root 1052531 1999-07-08 05:50 ./source/a/tar/tar-1.13.tar.gz --rw-r--r-- 1 root root 218 2009-05-06 21:08 ./source/a/tar/tar-1.22-support_txz.diff.gz --rw-r--r-- 1 root root 2094575 2009-03-05 07:46 ./source/a/tar/tar-1.22.tar.bz2 --rw-r--r-- 1 root root 2676 2002-02-22 03:24 ./source/a/tar/tar.1.gz --rwxr-xr-x 1 root root 4539 2009-05-19 20:05 ./source/a/tar/tar.SlackBuild --rw-r--r-- 1 root root 498 2004-06-06 20:15 ./source/a/tar/tar.nolonezero.diff.gz --rw-r--r-- 1 root root 312 2009-03-10 01:18 ./source/a/tar/tar.norecordsizespam.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/tcsh --rw-r--r-- 1 root root 146 1995-08-06 23:12 ./source/a/tcsh/doinst.sh.gz --rw-r--r-- 1 root root 886 2002-03-23 22:06 ./source/a/tcsh/slack-desc --rw-r--r-- 1 root root 727440 2007-03-03 20:08 ./source/a/tcsh/tcsh-6.15.00.tar.bz2 --rwxr-xr-x 1 root root 3004 2009-05-19 20:05 ./source/a/tcsh/tcsh.SlackBuild --rw-r--r-- 1 root root 202 2006-02-09 20:33 ./source/a/tcsh/tcsh.nobuiltincolorls.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/time --rw-r--r-- 1 root root 887 2008-02-11 03:44 ./source/a/time/slack-desc --rw-r--r-- 1 root root 103066 1996-07-11 15:08 ./source/a/time/time-1.7.tar.gz --rwxr-xr-x 1 root root 2263 2009-05-19 20:05 ./source/a/time/time.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/tree --rw-r--r-- 1 root root 873 2006-12-23 06:19 ./source/a/tree/slack-desc --rw-r--r-- 1 root root 31732 2009-01-22 15:17 ./source/a/tree/tree-1.5.2.2.tar.bz2 --rwxr-xr-x 1 root root 2260 2009-05-19 20:05 ./source/a/tree/tree.SlackBuild -drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/a/udev -drwxr-xr-x 6 root root 4096 2008-12-01 02:00 ./source/a/udev/config -drwxr-xr-x 2 root root 4096 2009-07-15 03:58 ./source/a/udev/config/modprobe.d --rw-r--r-- 1 root root 6251 2009-07-15 02:38 ./source/a/udev/config/modprobe.d/blacklist.conf.new --rw-r--r-- 1 root root 443 2009-04-20 23:01 ./source/a/udev/config/modprobe.d/isapnp.conf.new --rw-r--r-- 1 root root 265 2009-07-15 03:54 ./source/a/udev/config/modprobe.d/psmouse.conf.new --rw-r--r-- 1 root root 244 2008-12-01 02:00 ./source/a/udev/config/modprobe.d/usb-controller.conf.new -drwxr-xr-x 2 root root 4096 2008-12-01 02:59 ./source/a/udev/config/rc.d --rw-r--r-- 1 root root 4231 2009-04-22 02:01 ./source/a/udev/config/rc.d/rc.udev.new -drwxr-xr-x 2 root root 4096 2008-08-31 06:31 ./source/a/udev/config/rules.d --rw-r--r-- 1 root root 444 2008-12-03 23:46 ./source/a/udev/config/rules.d/40-slackware.rules --rw-r--r-- 1 root root 1828 2009-04-22 02:06 ./source/a/udev/config/rules.d/65-permissions.rules --rw-r--r-- 1 root root 305 2007-10-15 19:09 ./source/a/udev/config/rules.d/90-network.rules -drwxr-xr-x 2 root root 4096 2008-08-30 22:16 ./source/a/udev/config/scripts --rwxr-xr-x 1 root root 1978 2007-09-22 22:06 ./source/a/udev/config/scripts/nethelper.sh --rw-r--r-- 1 root root 485 2008-08-31 03:46 ./source/a/udev/config/udev.conf --rw-r--r-- 1 root root 555 2009-07-15 03:52 ./source/a/udev/doinst.sh.gz --rw-r--r-- 1 root root 758 2007-08-22 23:19 ./source/a/udev/rule_generator.diff.gz --rw-r--r-- 1 root root 825 2009-04-20 23:01 ./source/a/udev/slack-desc --rw-r--r-- 1 root root 448373 2009-04-09 12:53 ./source/a/udev/udev-141.tar.bz2 --rw-r--r-- 1 root root 248 2009-04-08 23:38 ./source/a/udev/udev-141.tar.bz2.sign --rw-r--r-- 1 root root 455 2008-10-09 12:40 ./source/a/udev/udev-fixed-devices.tar.gz --rwxr-xr-x 1 root root 4370 2009-07-15 02:42 ./source/a/udev/udev.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/unarj --rw-r--r-- 1 root root 269 2006-12-23 05:36 ./source/a/unarj/Makefile.gz --rw-r--r-- 1 root root 848 2006-12-23 05:29 ./source/a/unarj/slack-desc --rwxr-xr-x 1 root root 1993 2009-05-19 20:05 ./source/a/unarj/unarj.SlackBuild --rw-r--r-- 1 root root 23151 2002-06-05 05:00 ./source/a/unarj/unarj265.tar.gz -drwxr-xr-x 2 root root 4096 2009-08-13 02:53 ./source/a/usbutils --rw-r--r-- 1 root root 781 2009-05-30 01:47 ./source/a/usbutils/slack-desc --rw-r--r-- 1 root root 218443 2009-05-06 22:22 ./source/a/usbutils/usbutils-0.82.tar.bz2 --rwxr-xr-x 1 root root 3735 2009-08-13 02:56 ./source/a/usbutils/usbutils.SlackBuild --rw-r--r-- 1 root root 220 2009-05-30 01:47 ./source/a/usbutils/usbutils.ids.dest.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/utempter --rw-r--r-- 1 root root 230 2006-12-12 23:47 ./source/a/utempter/doinst.sh.gz --rw-r--r-- 1 root root 14583 2005-12-11 13:16 ./source/a/utempter/libutempter-1.1.4.tar.bz2 --rw-r--r-- 1 root root 189 2005-12-12 12:56 ./source/a/utempter/libutempter-1.1.4.tar.bz2.asc --rw-r--r-- 1 root root 809 2003-06-08 01:36 ./source/a/utempter/slack-desc --rwxr-xr-x 1 root root 2843 2009-05-19 20:05 ./source/a/utempter/utempter.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/a/util-linux-ng --rw-r--r-- 1 root root 43150 2007-10-07 02:17 ./source/a/util-linux-ng/adjtimex_1.23-1.diff.gz --rw-r--r-- 1 root root 56580 2007-10-07 02:17 ./source/a/util-linux-ng/adjtimex_1.23.orig.tar.gz --rw-r--r-- 1 root root 4513 2008-03-17 05:37 ./source/a/util-linux-ng/bsdstrings.tar.gz --rw-r--r-- 1 root root 337 2008-03-17 05:47 ./source/a/util-linux-ng/doinst.sh.gz --rw-r--r-- 1 root root 198520 2001-04-15 14:21 ./source/a/util-linux-ng/net-tools-1.60.tar.bz2 --rw-r--r-- 1 root root 650 2001-03-22 05:23 ./source/a/util-linux-ng/net-tools.diff.gz --rw-r--r-- 1 root root 173444 2007-12-02 05:47 ./source/a/util-linux-ng/net-tools_1.60-19.diff.gz --rw-r--r-- 1 root root 1266 2009-02-09 22:33 ./source/a/util-linux-ng/scsi_ioctl.h --rw-r--r-- 1 root root 52437 2008-03-17 05:37 ./source/a/util-linux-ng/setserial-2.17.tar.gz --rw-r--r-- 1 root root 729 2008-03-17 05:37 ./source/a/util-linux-ng/setserial-rc.serial.diff.gz --rw-r--r-- 1 root root 904 2008-03-17 04:45 ./source/a/util-linux-ng/slack-desc --rw-r--r-- 1 root root 2956769 2009-02-09 17:06 ./source/a/util-linux-ng/util-linux-ng-2.14.2.tar.bz2 --rwxr-xr-x 1 root root 8503 2009-05-23 00:42 ./source/a/util-linux-ng/util-linux-ng.SlackBuild --rw-r--r-- 1 root root 266 2008-03-31 19:54 ./source/a/util-linux-ng/util-linux-ng.fdisk-no-solaris.diff.gz --rw-r--r-- 1 root root 11130 2008-03-17 05:37 ./source/a/util-linux-ng/ziptool-1.4.0.tar.bz2 --rw-r--r-- 1 root root 386 2009-02-09 22:34 ./source/a/util-linux-ng/ziptool-fix_build.patch.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/which --rw-r--r-- 1 root root 1038 2006-12-14 02:00 ./source/a/which/slack-desc --rw-r--r-- 1 root root 135372 2008-08-06 15:21 ./source/a/which/which-2.20.tar.gz --rw-r--r-- 1 root root 152 2008-08-06 15:21 ./source/a/which/which-2.20.tar.gz.sig --rwxr-xr-x 1 root root 2806 2009-05-19 20:05 ./source/a/which/which.SlackBuild -drwxr-xr-x 2 root root 4096 2009-06-16 06:30 ./source/a/xfsprogs --rw-r--r-- 1 root root 954 2006-02-21 05:35 ./source/a/xfsprogs/slack-desc --rw-r--r-- 1 root root 840452 2009-05-05 17:29 ./source/a/xfsprogs/xfsprogs-3.0.1.tar.xz --rwxr-xr-x 1 root root 3487 2009-06-13 04:32 ./source/a/xfsprogs/xfsprogs.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/xz --rw-r--r-- 1 root root 952 2009-04-08 00:19 ./source/a/xz/slack-desc --rw-r--r-- 1 root root 666579 2009-03-23 02:00 ./source/a/xz/xz-4.999.8beta.tar.bz2 --rwxr-xr-x 1 root root 4125 2009-05-19 20:05 ./source/a/xz/xz.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/zoo --rw-r--r-- 1 root root 996 2006-12-14 01:08 ./source/a/zoo/slack-desc --rw-r--r-- 1 root root 173607 1994-12-30 20:19 ./source/a/zoo/zoo-2.10.tar.gz --rwxr-xr-x 1 root root 2565 2009-05-19 20:05 ./source/a/zoo/zoo.SlackBuild --rw-r--r-- 1 root root 12333 2006-05-29 21:19 ./source/a/zoo/zoo_2.10-18.diff.gz -drwxr-xr-x 70 root root 4096 2009-08-22 05:44 ./source/ap -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/a2ps --rw-r--r-- 1 root root 1814364 2007-12-29 03:53 ./source/ap/a2ps/a2ps-4.14.tar.bz2 --rwxr-xr-x 1 root root 4858 2009-05-23 00:41 ./source/ap/a2ps/a2ps.SlackBuild --rw-r--r-- 1 root root 298 2009-03-31 01:11 ./source/ap/a2ps/a2ps.a2ps_cfg.in.diff.gz --rw-r--r-- 1 root root 249 2001-01-19 05:15 ./source/ap/a2ps/a2ps.diff.gz --rw-r--r-- 1 root root 62039 1997-08-28 13:11 ./source/ap/a2ps/psutils-1.17.tar.gz --rw-r--r-- 1 root root 574 2009-03-04 01:22 ./source/ap/a2ps/psutils.destdir.diff.gz --rw-r--r-- 1 root root 471 2001-01-19 04:54 ./source/ap/a2ps/psutils.diff.gz --rw-r--r-- 1 root root 900 2002-03-29 03:05 ./source/ap/a2ps/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/acct --rw-r--r-- 1 root root 23954 2008-03-08 08:47 ./source/ap/acct/acct-6.4pre1-6.diff.gz --rw-r--r-- 1 root root 261410 2006-11-04 12:47 ./source/ap/acct/acct-6.4pre1.tar.bz2 --rwxr-xr-x 1 root root 4051 2009-05-19 20:05 ./source/ap/acct/acct.SlackBuild --rw-r--r-- 1 root root 309 2008-11-12 18:52 ./source/ap/acct/acct.logdir.fhs.diff.gz --rw-r--r-- 1 root root 1054 2008-11-12 20:20 ./source/ap/acct/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/alsa-utils --rw-r--r-- 1 root root 1039779 2008-10-29 12:51 ./source/ap/alsa-utils/alsa-utils-1.0.18.tar.bz2 --rwxr-xr-x 1 root root 3220 2009-05-23 00:41 ./source/ap/alsa-utils/alsa-utils.SlackBuild --rw-r--r-- 1 root root 899 2007-06-06 00:01 ./source/ap/alsa-utils/alsa-utils.alsaconf.diff.gz --rw-r--r-- 1 root root 1090 2008-12-03 01:49 ./source/ap/alsa-utils/rc.alsa.gz --rw-r--r-- 1 root root 1086 2003-08-29 06:09 ./source/ap/alsa-utils/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/amp --rw-r--r-- 1 root root 236 2002-02-24 19:46 ./source/ap/amp/_amp.tar.gz --rw-r--r-- 1 root root 100337 1999-03-17 18:11 ./source/ap/amp/amp-0.7.6.tar.gz --rw-r--r-- 1 root root 239 2008-10-01 07:38 ./source/ap/amp/amp-gcc34.diff.gz --rwxr-xr-x 1 root root 2004 2009-05-19 20:05 ./source/ap/amp/amp.SlackBuild --rw-r--r-- 1 root root 1514 1999-03-17 18:33 ./source/ap/amp/license_excerpts --rw-r--r-- 1 root root 729 2002-03-29 01:09 ./source/ap/amp/slack-desc -drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/ap/ash --rw-r--r-- 1 root root 7174 1998-10-19 21:42 ./source/ap/ash/_ash.tar.gz --rw-r--r-- 1 root root 121233 2001-01-12 16:50 ./source/ap/ash/ash-0.4.0.tar.gz --rwxr-xr-x 1 root root 2761 2009-05-19 20:05 ./source/ap/ash/ash.SlackBuild -drwxr-xr-x 2 root root 4096 2002-06-02 18:56 ./source/ap/ash/patches --rw-r--r-- 1 root root 6275 2002-06-02 18:57 ./source/ap/ash/patches/ash-builtin.patch.gz --rw-r--r-- 1 root root 6506 2002-06-02 18:57 ./source/ap/ash/patches/ash-debian.patch.gz --rw-r--r-- 1 root root 832 2002-06-02 18:57 ./source/ap/ash/patches/ash-echo.patch.gz --rw-r--r-- 1 root root 707 2002-06-02 18:57 ./source/ap/ash/patches/ash-freebsd.patch.gz --rw-r--r-- 1 root root 312 2002-06-02 18:57 ./source/ap/ash/patches/ash-getcwd.patch.gz --rw-r--r-- 1 root root 1585 2002-06-02 18:57 ./source/ap/ash/patches/ash-getopt.patch.gz --rw-r--r-- 1 root root 2937 2002-06-02 18:57 ./source/ap/ash/patches/ash-glob.patch.gz --rw-r--r-- 1 root root 4555 2002-06-02 18:57 ./source/ap/ash/patches/ash-hetio.patch.gz --rw-r--r-- 1 root root 1004 2002-06-02 18:57 ./source/ap/ash/patches/ash-jobs.patch.gz --rw-r--r-- 1 root root 5625 2002-06-02 18:57 ./source/ap/ash/patches/ash-kill.patch.gz --rw-r--r-- 1 root root 1338 2002-06-02 18:57 ./source/ap/ash/patches/ash-makefile.patch.gz --rw-r--r-- 1 root root 718 2002-06-02 18:57 ./source/ap/ash/patches/ash-manpage.patch.gz --rw-r--r-- 1 root root 2357 2002-06-02 18:57 ./source/ap/ash/patches/ash-memout.patch.gz --rw-r--r-- 1 root root 1499 2002-06-02 18:57 ./source/ap/ash/patches/ash-misc.patch.gz --rw-r--r-- 1 root root 388 2002-06-02 18:57 ./source/ap/ash/patches/ash-ppid.patch.gz --rw-r--r-- 1 root root 3928 2002-06-02 18:57 ./source/ap/ash/patches/ash-redir.patch.gz --rw-r--r-- 1 root root 4570 2002-06-02 18:57 ./source/ap/ash/patches/ash-setmode.patch.gz --rw-r--r-- 1 root root 261 2002-06-02 18:57 ./source/ap/ash/patches/ash-sighup.patch.gz --rw-r--r-- 1 root root 2215 2002-06-02 18:57 ./source/ap/ash/patches/ash-syntax.patch.gz --rw-r--r-- 1 root root 3668 2002-06-02 18:57 ./source/ap/ash/patches/ash-test.patch.gz --rw-r--r-- 1 root root 585 2002-06-02 18:57 ./source/ap/ash/patches/ash-times.patch.gz --rw-r--r-- 1 root root 979 2002-06-02 19:04 ./source/ap/ash/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/at --rw-r--r-- 1 root root 86817 2006-01-03 07:32 ./source/ap/at/at-3.1.10.tar.bz2 --rwxr-xr-x 1 root root 3083 2009-05-19 20:05 ./source/ap/at/at.SlackBuild --rw-r--r-- 1 root root 414 2006-08-03 00:45 ./source/ap/at/doinst.sh.gz --rw-r--r-- 1 root root 737 2003-11-23 18:46 ./source/ap/at/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/aumix --rw-r--r-- 1 root root 157503 2002-11-25 01:36 ./source/ap/aumix/aumix-2.8.tar.bz2 --rwxr-xr-x 1 root root 2149 2009-05-23 00:41 ./source/ap/aumix/aumix.SlackBuild --rw-r--r-- 1 root root 609 2003-08-29 06:17 ./source/ap/aumix/aumix.alsa.diff.gz --rw-r--r-- 1 root root 764 2002-06-05 04:41 ./source/ap/aumix/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/bc --rw-r--r-- 1 root root 290069 2006-09-05 02:43 ./source/ap/bc/bc-1.06.95.tar.bz2 --rw-r--r-- 1 root root 184 2006-09-05 02:43 ./source/ap/bc/bc-1.06.95.tar.bz2.sig --rwxr-xr-x 1 root root 3270 2009-05-23 00:41 ./source/ap/bc/bc.SlackBuild --rw-r--r-- 1 root root 839 2002-05-13 17:58 ./source/ap/bc/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/bpe --rw-r--r-- 1 root root 115498 2001-01-02 06:38 ./source/ap/bpe/bpe-2.01.00.tar.gz --rwxr-xr-x 1 root root 2200 2009-05-23 00:41 ./source/ap/bpe/bpe.SlackBuild --rw-r--r-- 1 root root 789 2004-06-06 22:28 ./source/ap/bpe/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/cdparanoia --rw-r--r-- 1 root root 183236 2008-09-11 21:36 ./source/ap/cdparanoia/cdparanoia-III-10.2.src.tar.gz --rw-r--r-- 1 root root 3327 2008-10-19 15:49 ./source/ap/cdparanoia/cdparanoia-III-10.2_cdda_private.patch.gz --rwxr-xr-x 1 root root 3882 2009-05-19 20:05 ./source/ap/cdparanoia/cdparanoia.SlackBuild --rw-r--r-- 1 root root 1056 2007-11-17 04:37 ./source/ap/cdparanoia/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/cdrdao --rw-r--r-- 1 root root 1384615 2005-11-24 07:55 ./source/ap/cdrdao/cdrdao-1.2.1.tar.bz2 --rwxr-xr-x 1 root root 2536 2009-05-19 20:05 ./source/ap/cdrdao/cdrdao.SlackBuild --rw-r--r-- 1 root root 753 2002-03-23 22:15 ./source/ap/cdrdao/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/cdrtools --rw-r--r-- 1 root root 1779673 2009-01-30 00:08 ./source/ap/cdrtools/cdrtools-2.01.01a57.tar.bz2 --rwxr-xr-x 1 root root 4684 2009-05-23 00:41 ./source/ap/cdrtools/cdrtools.SlackBuild --rw-r--r-- 1 root root 281 2008-02-28 05:50 ./source/ap/cdrtools/doinst.sh.gz --rw-r--r-- 1 root root 868 2008-02-11 03:44 ./source/ap/cdrtools/slack-desc --rw-r--r-- 1 root root 52968 2007-05-17 05:50 ./source/ap/cdrtools/zisofs-tools-1.0.8.tar.bz2 --rw-r--r-- 1 root root 248 2007-05-17 05:50 ./source/ap/cdrtools/zisofs-tools-1.0.8.tar.bz2.sign -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/cupsddk --rw-r--r-- 1 root root 2082214 2009-03-04 20:19 ./source/ap/cupsddk/cupsddk-1.2.3-source.tar.bz2 --rwxr-xr-x 1 root root 2686 2009-05-19 20:05 ./source/ap/cupsddk/cupsddk.SlackBuild --rw-r--r-- 1 root root 989 2009-03-05 16:01 ./source/ap/cupsddk/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-22 21:58 ./source/ap/dc3dd --rw-r--r-- 1 root root 2138588 2009-03-19 19:59 ./source/ap/dc3dd/dc3dd-6.12.3.tar.xz --rwxr-xr-x 1 root root 2910 2009-07-22 22:07 ./source/ap/dc3dd/dc3dd.SlackBuild --rw-r--r-- 1 root root 913 2009-02-14 22:30 ./source/ap/dc3dd/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/diffstat --rw-r--r-- 1 root root 88470 2006-07-17 00:14 ./source/ap/diffstat/diffstat-1.43.tar.bz2 --rwxr-xr-x 1 root root 3016 2009-05-19 20:05 ./source/ap/diffstat/diffstat.SlackBuild --rw-r--r-- 1 root root 868 2006-09-20 05:07 ./source/ap/diffstat/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/diffutils --rw-r--r-- 1 root root 780086 2002-04-06 01:13 ./source/ap/diffutils/diffutils-2.8.1.tar.gz --rw-r--r-- 1 root root 357 2006-08-21 02:41 ./source/ap/diffutils/diffutils-sdiff-no-waitpid.patch.gz --rwxr-xr-x 1 root root 3271 2009-05-19 20:05 ./source/ap/diffutils/diffutils.SlackBuild --rw-r--r-- 1 root root 321 2006-08-21 02:46 ./source/ap/diffutils/doinst.sh.gz --rw-r--r-- 1 root root 743 2002-03-23 22:17 ./source/ap/diffutils/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-13 04:41 ./source/ap/dmapi --rw-r--r-- 1 root root 196416 2009-05-05 17:24 ./source/ap/dmapi/dmapi-2.2.10.tar.xz --rwxr-xr-x 1 root root 3523 2009-06-13 04:42 ./source/ap/dmapi/dmapi.SlackBuild --rw-r--r-- 1 root root 526 2008-04-01 05:05 ./source/ap/dmapi/dmapi.destdir.diff.gz --rw-r--r-- 1 root root 804 2006-02-21 05:56 ./source/ap/dmapi/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/dmidecode --rw-r--r-- 1 root root 51904 2008-11-23 20:56 ./source/ap/dmidecode/dmidecode-2.10.tar.bz2 --rw-r--r-- 1 root root 65 2008-11-23 20:56 ./source/ap/dmidecode/dmidecode-2.10.tar.bz2.sig --rwxr-xr-x 1 root root 2905 2009-05-19 20:05 ./source/ap/dmidecode/dmidecode.SlackBuild --rw-r--r-- 1 root root 215 2007-05-02 19:54 ./source/ap/dmidecode/dmidecode.makefile.diff.gz --rw-r--r-- 1 root root 933 2007-05-02 20:04 ./source/ap/dmidecode/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/dvd+rw-tools --rw-r--r-- 1 root root 140846 2008-03-05 08:44 ./source/ap/dvd+rw-tools/dvd+rw-tools-7.1.tar.gz --rwxr-xr-x 1 root root 2462 2009-05-19 20:05 ./source/ap/dvd+rw-tools/dvd+rw-tools.SlackBuild --rw-r--r-- 1 root root 185 2008-04-07 04:06 ./source/ap/dvd+rw-tools/dvd+rw-tools.limits.h.diff.gz --rw-r--r-- 1 root root 49 2003-09-02 03:20 ./source/ap/dvd+rw-tools/dvd+rw-tools.url --rw-r--r-- 1 root root 823 2008-02-11 03:44 ./source/ap/dvd+rw-tools/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/enscript --rw-r--r-- 1 root root 814308 2002-01-24 07:39 ./source/ap/enscript/enscript-1.6.3.tar.gz --rwxr-xr-x 1 root root 2878 2009-05-19 20:05 ./source/ap/enscript/enscript.SlackBuild --rw-r--r-- 1 root root 920 2002-03-23 22:26 ./source/ap/enscript/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/flac --rw-r--r-- 1 root root 1459486 2007-09-18 20:12 ./source/ap/flac/flac-1.2.1.tar.bz2 --rwxr-xr-x 1 root root 3497 2009-05-19 20:05 ./source/ap/flac/flac.SlackBuild --rw-r--r-- 1 root root 371 2008-03-08 21:48 ./source/ap/flac/flac.man.diff.gz --rw-r--r-- 1 root root 1058 2002-08-26 19:03 ./source/ap/flac/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-18 20:29 ./source/ap/foomatic-filters --rw-r--r-- 1 root root 275 2007-09-26 20:11 ./source/ap/foomatic-filters/doinst.sh.gz --rw-r--r-- 1 root root 238373 2009-06-24 11:54 ./source/ap/foomatic-filters/foomatic-filters-4.0.2.tar.gz --rwxr-xr-x 1 root root 3684 2009-08-18 20:55 ./source/ap/foomatic-filters/foomatic-filters.SlackBuild --rw-r--r-- 1 root root 1104 2008-02-11 03:44 ./source/ap/foomatic-filters/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-22 01:42 ./source/ap/ghostscript -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/ghostscript-fonts-std --rw-r--r-- 1 root root 165 2007-02-19 00:49 ./source/ap/ghostscript-fonts-std/doinst.sh.gz --rw-r--r-- 1 root root 3621829 2003-07-24 12:38 ./source/ap/ghostscript-fonts-std/ghostscript-fonts-std-8.11.tar.bz2 --rwxr-xr-x 1 root root 2267 2009-05-19 20:05 ./source/ap/ghostscript-fonts-std/ghostscript-fonts-std.SlackBuild --rw-r--r-- 1 root root 840 2007-02-19 00:47 ./source/ap/ghostscript-fonts-std/slack-desc --rw-r--r-- 1 root root 1436 2008-04-11 20:41 ./source/ap/ghostscript/cidfmap.gz --rw-r--r-- 1 root root 12676720 2009-07-31 22:59 ./source/ap/ghostscript/ghostscript-8.70.tar.xz --rwxr-xr-x 1 root root 4956 2009-08-22 05:34 ./source/ap/ghostscript/ghostscript.SlackBuild --rw-r--r-- 1 root root 1011 2008-03-02 02:54 ./source/ap/ghostscript/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 19:18 ./source/ap/gphoto2 --rw-r--r-- 1 root root 598659 2009-04-02 15:16 ./source/ap/gphoto2/gphoto2-2.4.5.tar.bz2 --rwxr-xr-x 1 root root 2934 2009-06-09 19:18 ./source/ap/gphoto2/gphoto2.SlackBuild --rw-r--r-- 1 root root 762 2008-09-11 03:57 ./source/ap/gphoto2/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/groff --rw-r--r-- 1 root root 2842508 2009-01-09 14:34 ./source/ap/groff/groff-1.20.1.tar.bz2 --rwxr-xr-x 1 root root 4105 2009-05-19 20:05 ./source/ap/groff/groff.SlackBuild --rw-r--r-- 1 root root 270 2009-01-14 04:15 ./source/ap/groff/groff.docdir.diff.gz --rw-r--r-- 1 root root 459 2005-06-23 01:46 ./source/ap/groff/groff.man.mdoc.local.gz --rw-r--r-- 1 root root 887 2002-03-23 22:27 ./source/ap/groff/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-22 02:33 ./source/ap/gutenprint --rw-r--r-- 1 root root 4017848 2009-07-30 01:49 ./source/ap/gutenprint/gutenprint-5.2.4.tar.xz --rwxr-xr-x 1 root root 3525 2009-08-22 05:44 ./source/ap/gutenprint/gutenprint.SlackBuild --rw-r--r-- 1 root root 1010 2006-08-12 05:40 ./source/ap/gutenprint/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 20:27 ./source/ap/hplip --rw-r--r-- 1 root root 118 2009-03-05 16:38 ./source/ap/hplip/doinst.sh.gz --rw-r--r-- 1 root root 14039442 2009-04-29 21:21 ./source/ap/hplip/hplip-3.9.4b.tar.bz2 --rwxr-xr-x 1 root root 3550 2009-06-09 20:28 ./source/ap/hplip/hplip.SlackBuild --rw-r--r-- 1 root root 583 2009-06-09 05:44 ./source/ap/hplip/hplip.prevent_segfault.diff.gz --rw-r--r-- 1 root root 935 2009-03-05 17:13 ./source/ap/hplip/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/ispell --rw-r--r-- 1 root root 580742 2001-08-01 22:17 ./source/ap/ispell/ispell-3.2.06.tar.gz --rwxr-xr-x 1 root root 3076 2009-05-19 20:05 ./source/ap/ispell/ispell.SlackBuild --rw-r--r-- 1 root root 5808 2001-06-08 20:52 ./source/ap/ispell/ispell.diff.gz --rw-r--r-- 1 root root 1057 2002-03-23 22:27 ./source/ap/ispell/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/jed --rw-r--r-- 1 root root 762826 2006-04-03 02:18 ./source/ap/jed/jed-0.99-18.tar.bz2 --rw-r--r-- 1 root root 261 2006-04-03 02:28 ./source/ap/jed/jed-0.99-18.tar.bz2.sig --rwxr-xr-x 1 root root 2986 2009-05-19 20:05 ./source/ap/jed/jed.SlackBuild --rw-r--r-- 1 root root 305 2006-06-26 04:10 ./source/ap/jed/jed.mouse.diff.gz --rw-r--r-- 1 root root 258 2006-06-26 04:15 ./source/ap/jed/jed.multibyte.diff.gz --rw-r--r-- 1 root root 938 2002-03-23 22:28 ./source/ap/jed/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/joe --rw-r--r-- 1 root root 492145 2006-07-20 19:45 ./source/ap/joe/joe-3.5.tar.bz2 --rwxr-xr-x 1 root root 2375 2009-05-23 00:41 ./source/ap/joe/joe.SlackBuild --rw-r--r-- 1 root root 599 2002-02-24 21:25 ./source/ap/joe/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/jove --rwxr-xr-x 1 root root 2850 2009-06-16 18:40 ./source/ap/jove/jove.SlackBuild --rw-r--r-- 1 root root 1709 2009-03-04 05:45 ./source/ap/jove/jove.makefile.diff.gz --rw-r--r-- 1 root root 451492 2009-03-04 05:45 ./source/ap/jove/jove4.16.0.70.tar.gz --rw-r--r-- 1 root root 792 2009-03-04 05:45 ./source/ap/jove/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/ksh93 --rw-r--r-- 1 root root 12885 2004-12-16 17:19 ./source/ap/ksh93/CPL --rw-r--r-- 1 root root 344670 2007-04-15 20:14 ./source/ap/ksh93/INIT.2007-03-28.tgz --rw-r--r-- 1 root root 611444 2007-04-15 20:15 ./source/ap/ksh93/ast-ksh-locale.2007-03-28.tgz --rw-r--r-- 1 root root 1646999 2007-04-15 20:15 ./source/ap/ksh93/ast-ksh.2007-03-28.tgz --rwxr-xr-x 1 root root 4943 2009-05-19 20:05 ./source/ap/ksh93/ksh93.SlackBuild --rw-r--r-- 1 root root 996 2002-03-23 22:28 ./source/ap/ksh93/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/libx86 --rw-r--r-- 1 root root 87428 2008-05-19 09:30 ./source/ap/libx86/libx86-1.1.tar.gz --rwxr-xr-x 1 root root 2627 2009-05-19 20:05 ./source/ap/libx86/libx86.SlackBuild --rw-r--r-- 1 root root 127 2008-11-24 18:21 ./source/ap/libx86/libx86.info --rw-r--r-- 1 root root 324 2008-11-24 08:27 ./source/ap/libx86/lrmi.c.diff.gz --rw-r--r-- 1 root root 769 2008-11-24 18:22 ./source/ap/libx86/slack-desc -drwxr-xr-x 4 root root 4096 2009-08-02 20:41 ./source/ap/linuxdoc-tools --rw-r--r-- 1 root root 4268 2009-08-02 19:03 ./source/ap/linuxdoc-tools/ChangeLog.txt -drwxr-xr-x 2 root root 4096 2005-10-04 18:51 ./source/ap/linuxdoc-tools/arm --rwxr-xr-x 1 root root 1591 2009-07-18 12:15 ./source/ap/linuxdoc-tools/arm/build --rwxr-xr-x 1 root root 28 2006-02-05 00:16 ./source/ap/linuxdoc-tools/linuxdoc-tools.SlackBuild --rwxr-xr-x 1 root root 30046 2009-08-02 18:28 ./source/ap/linuxdoc-tools/linuxdoc-tools.build --rwxr-xr-x 1 root root 2739 2009-08-02 19:26 ./source/ap/linuxdoc-tools/postbuildfixes.sh --rw-r--r-- 1 root root 1166 2006-06-26 15:17 ./source/ap/linuxdoc-tools/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-31 23:53 ./source/ap/linuxdoc-tools/sources --rw-r--r-- 1 root root 1189280 2009-05-26 21:26 ./source/ap/linuxdoc-tools/sources/asciidoc-8.4.5.tar.gz --rw-r--r-- 1 root root 277650 2007-05-05 12:33 ./source/ap/linuxdoc-tools/sources/docbook-dsssl-1.79.tar.bz2 --rw-r--r-- 1 root root 142278 2004-11-12 12:42 ./source/ap/linuxdoc-tools/sources/docbook-dsssl-doc-1.79.tar.bz2 --rw-r--r-- 1 root root 3748236 2009-07-18 10:12 ./source/ap/linuxdoc-tools/sources/docbook-style-xsl-1.75.1-1.fc12.src.rpm --rw-r--r-- 1 root root 163253 2009-07-18 09:01 ./source/ap/linuxdoc-tools/sources/docbook-utils-0.6.14-17.fc12.src.rpm --rw-r--r-- 1 root root 98497 2006-10-26 17:17 ./source/ap/linuxdoc-tools/sources/docbook-xml-4.5.zip --rw-r--r-- 1 root root 13530 2007-09-26 22:02 ./source/ap/linuxdoc-tools/sources/docbook_4.5-4.diff.gz --rw-r--r-- 1 root root 476372 2007-04-11 01:17 ./source/ap/linuxdoc-tools/sources/docbook_4.5.orig.tar.gz --rw-r--r-- 1 root root 725038 2009-06-28 03:16 ./source/ap/linuxdoc-tools/sources/gnome-doc-utils-0.17.2.tar.bz2 --rw-r--r-- 1 root root 453459 2008-11-16 19:21 ./source/ap/linuxdoc-tools/sources/gtk-doc-1.11.tar.bz2 --rw-r--r-- 1 root root 8329 2008-01-04 17:02 ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii-32.diff.gz --rw-r--r-- 1 root root 92130 2001-04-15 16:15 ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii.orig.tar.gz --rw-r--r-- 1 root root 328 2009-05-12 19:19 ./source/ap/linuxdoc-tools/sources/linuxdoc-tools.lib64.diff --rw-r--r-- 1 root root 610443 2008-07-07 11:17 ./source/ap/linuxdoc-tools/sources/linuxdoc-tools_0.9.56.tar.gz --rw-r--r-- 1 root root 1058451 2003-04-18 20:32 ./source/ap/linuxdoc-tools/sources/openjade-1.3.3-pre1.tar.gz --rw-r--r-- 1 root root 1524905 2009-03-13 19:31 ./source/ap/linuxdoc-tools/sources/opensp-1.5.2-11.fc11.src.rpm --rw-r--r-- 1 root root 95270 2009-07-18 09:10 ./source/ap/linuxdoc-tools/sources/sgml-common-0.6.3-29.fc12.src.rpm --rwxr-xr-x 1 root root 3511 2009-07-31 23:17 ./source/ap/linuxdoc-tools/sources/source.download --rw-r--r-- 1 root root 103939 2009-03-25 15:02 ./source/ap/linuxdoc-tools/sources/xmlto-0.0.22.tar.bz2 --rwxr-xr-x 1 root root 2612 2009-08-02 19:09 ./source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools -drwxr-xr-x 2 root root 4096 2009-06-22 22:26 ./source/ap/lm_sensors --rw-r--r-- 1 root root 154551 2009-06-21 19:03 ./source/ap/lm_sensors/lm_sensors-3.1.1.tar.bz2 --rw-r--r-- 1 root root 65 2009-06-21 19:03 ./source/ap/lm_sensors/lm_sensors-3.1.1.tar.bz2.sig --rwxr-xr-x 1 root root 3453 2009-06-22 21:43 ./source/ap/lm_sensors/lm_sensors.SlackBuild --rw-r--r-- 1 root root 312 2008-10-26 01:06 ./source/ap/lm_sensors/lm_sensors.makefile.diff.gz --rw-r--r-- 1 root root 1105 2006-09-20 03:52 ./source/ap/lm_sensors/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/lsof --rwxr-xr-x 1 root root 2459 2009-05-19 20:05 ./source/ap/lsof/lsof.SlackBuild --rw-r--r-- 1 root root 756729 2007-04-24 19:05 ./source/ap/lsof/lsof_4.78.tar.bz2 --rw-r--r-- 1 root root 152 2007-04-24 19:05 ./source/ap/lsof/lsof_4.78.tar.bz2.sig --rw-r--r-- 1 root root 789 2002-03-17 00:42 ./source/ap/lsof/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/lsscsi --rw-r--r-- 1 root root 107376 2009-01-23 16:50 ./source/ap/lsscsi/lsscsi-0.22.tar.bz2 --rwxr-xr-x 1 root root 3183 2009-05-19 20:05 ./source/ap/lsscsi/lsscsi.SlackBuild --rw-r--r-- 1 root root 36 2008-11-29 19:46 ./source/ap/lsscsi/lsscsi.url --rw-r--r-- 1 root root 825 2007-05-02 19:26 ./source/ap/lsscsi/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/madplay --rw-r--r-- 1 root root 590929 2004-02-23 23:28 ./source/ap/madplay/madplay-0.15.2b.tar.gz --rw-r--r-- 1 root root 174 2004-02-23 23:28 ./source/ap/madplay/madplay-0.15.2b.tar.gz.sign --rwxr-xr-x 1 root root 2458 2009-05-19 20:05 ./source/ap/madplay/madplay.SlackBuild --rw-r--r-- 1 root root 797 2003-09-10 00:59 ./source/ap/madplay/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-09 01:53 ./source/ap/man -drwxr-xr-x 2 root root 4096 2009-08-11 21:10 ./source/ap/man-pages --rw-r--r-- 1 root root 147 2008-07-17 17:25 ./source/ap/man-pages/doinst.sh.gz --rw-r--r-- 1 root root 1090236 2009-07-26 18:30 ./source/ap/man-pages/man-pages-3.22.tar.bz2 --rw-r--r-- 1 root root 971300 2008-06-17 11:18 ./source/ap/man-pages/man-pages-posix-2003-a.tar.bz2 --rwxr-xr-x 1 root root 3616 2009-08-11 21:10 ./source/ap/man-pages/man-pages.SlackBuild --rw-r--r-- 1 root root 950 2008-07-17 17:29 ./source/ap/man-pages/slack-desc --rw-r--r-- 1 root root 156268 2009-06-14 02:57 ./source/ap/man-pages/whatis.sample.xz --rw-r--r-- 1 root root 274 2008-04-09 19:04 ./source/ap/man/doinst.sh.gz --rw-r--r-- 1 root root 215 2009-08-09 01:53 ./source/ap/man/man-1.6f.nroff.mandoc.diff.gz --rw-r--r-- 1 root root 223765 2007-12-31 22:38 ./source/ap/man/man-1.6f.tar.bz2 --rwxr-xr-x 1 root root 3000 2009-08-09 02:17 ./source/ap/man/man.SlackBuild --rw-r--r-- 1 root root 901 2002-03-23 22:29 ./source/ap/man/slack-desc -drwxr-xr-x 3 root root 4096 2009-07-14 20:22 ./source/ap/mc --rw-r--r-- 1 root root 1456708 2009-07-14 18:50 ./source/ap/mc/mc-20090714_git.tar.xz --rwxr-xr-x 1 root root 3233 2009-07-14 21:21 ./source/ap/mc/mc.SlackBuild -drwxr-xr-x 2 root root 4096 2009-07-14 20:23 ./source/ap/mc/profile.d --rwxr-xr-x 1 root root 389 2008-11-29 19:55 ./source/ap/mc/profile.d/mc-wrapper.csh --rwxr-xr-x 1 root root 315 2008-11-29 19:55 ./source/ap/mc/profile.d/mc-wrapper.sh --rwxr-xr-x 1 root root 51 2008-11-29 19:55 ./source/ap/mc/profile.d/mc.csh --rwxr-xr-x 1 root root 45 2008-11-29 19:55 ./source/ap/mc/profile.d/mc.sh --rw-r--r-- 1 root root 904 2002-02-26 05:38 ./source/ap/mc/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-22 02:44 ./source/ap/most --rw-r--r-- 1 root root 131130 2007-09-09 16:16 ./source/ap/most/most-5.0.0a.tar.bz2 --rwxr-xr-x 1 root root 2651 2009-06-25 23:08 ./source/ap/most/most.SlackBuild --rw-r--r-- 1 root root 833 2003-06-06 00:54 ./source/ap/most/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/mpg321 --rw-r--r-- 1 root root 113449 2002-03-24 05:53 ./source/ap/mpg321/mpg321-0.2.10.tar.gz --rwxr-xr-x 1 root root 2286 2009-05-19 20:05 ./source/ap/mpg321/mpg321.SlackBuild --rw-r--r-- 1 root root 916 2002-05-17 20:39 ./source/ap/mpg321/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-04 01:40 ./source/ap/mysql --rw-r--r-- 1 root root 330 2008-10-02 04:21 ./source/ap/mysql/doinst.sh.gz --rw-r--r-- 1 root root 81 2009-06-06 19:32 ./source/ap/mysql/mirror-url --rw-r--r-- 1 root root 24660560 2009-07-07 14:05 ./source/ap/mysql/mysql-5.0.84.tar.xz --rwxr-xr-x 1 root root 1304 2009-08-04 01:40 ./source/ap/mysql/mysql-embedded.build --rwxr-xr-x 1 root root 5124 2009-08-04 01:40 ./source/ap/mysql/mysql.SlackBuild --rw-r--r-- 1 root root 1208 2008-04-17 20:26 ./source/ap/mysql/rc.mysqld.gz --rw-r--r-- 1 root root 816 2002-03-23 22:31 ./source/ap/mysql/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/nano --rw-r--r-- 1 root root 935683 2008-09-10 15:58 ./source/ap/nano/nano-2.0.9.tar.bz2 --rwxr-xr-x 1 root root 3323 2009-05-23 00:41 ./source/ap/nano/nano.SlackBuild --rw-r--r-- 1 root root 870 2007-04-07 20:52 ./source/ap/nano/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-10 01:26 ./source/ap/normalize --rw-r--r-- 1 root root 388777 2005-09-14 18:46 ./source/ap/normalize/normalize-0.7.7.tar.bz2 --rwxr-xr-x 1 root root 2475 2009-06-10 01:26 ./source/ap/normalize/normalize.SlackBuild --rw-r--r-- 1 root root 971 2004-05-25 04:30 ./source/ap/normalize/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/ntfsprogs --rw-r--r-- 1 root root 678114 2007-09-29 07:37 ./source/ap/ntfsprogs/ntfsprogs-2.0.0.tar.bz2 --rwxr-xr-x 1 root root 3560 2009-05-19 20:05 ./source/ap/ntfsprogs/ntfsprogs.SlackBuild --rw-r--r-- 1 root root 1064 2008-02-29 05:35 ./source/ap/ntfsprogs/slack-desc -drwxr-xr-x 2 root root 4096 2009-04-14 04:07 ./source/ap/pm-utils --rw-r--r-- 1 root root 5411 2009-04-14 04:05 ./source/ap/pm-utils/README.SLACKWARE --rw-r--r-- 1 root root 131736 2009-04-14 04:02 ./source/ap/pm-utils/pm-utils-1.2.5.tar.xz --rwxr-xr-x 1 root root 3191 2009-06-09 23:36 ./source/ap/pm-utils/pm-utils.SlackBuild --rw-r--r-- 1 root root 32 2009-04-14 04:05 ./source/ap/pm-utils/pm-utils.url --rw-r--r-- 1 root root 835 2009-04-14 04:05 ./source/ap/pm-utils/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/radeontool --rw-r--r-- 1 root root 20869 2008-11-24 19:14 ./source/ap/radeontool/radeontool-1.5.tar.gz --rwxr-xr-x 1 root root 2280 2009-05-19 20:05 ./source/ap/radeontool/radeontool.SlackBuild --rw-r--r-- 1 root root 219 2008-11-24 19:22 ./source/ap/radeontool/radeontool.c.diff.gz --rw-r--r-- 1 root root 247 2008-11-24 19:15 ./source/ap/radeontool/radeontool.info --rw-r--r-- 1 root root 802 2008-11-24 19:37 ./source/ap/radeontool/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/rexima --rw-r--r-- 1 root root 15903 2003-07-01 08:56 ./source/ap/rexima/rexima-1.4.tar.gz --rwxr-xr-x 1 root root 2106 2009-05-23 00:41 ./source/ap/rexima/rexima.SlackBuild --rw-r--r-- 1 root root 829 2002-05-29 20:44 ./source/ap/rexima/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/rpm --rw-r--r-- 1 root root 133 2008-06-30 19:30 ./source/ap/rpm/Packages.gz --rw-r--r-- 1 root root 132 2001-05-22 21:12 ./source/ap/rpm/doinst.sh.gz --rw-r--r-- 1 root root 2596088 2009-04-22 19:31 ./source/ap/rpm/rpm-4.7.0.tar.xz --rwxr-xr-x 1 root root 3745 2009-06-04 21:37 ./source/ap/rpm/rpm.SlackBuild --rw-r--r-- 1 root root 948 2009-04-23 03:04 ./source/ap/rpm/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/rzip --rw-r--r-- 1 root root 46785 2006-02-14 00:41 ./source/ap/rzip/rzip-2.1.tar.gz --rwxr-xr-x 1 root root 2451 2009-05-19 20:05 ./source/ap/rzip/rzip.SlackBuild --rw-r--r-- 1 root root 723 2004-06-03 03:13 ./source/ap/rzip/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/ap/sc --rw-r--r-- 1 root root 309 1999-08-03 23:52 ./source/ap/sc/_sc.tar.gz --rw-r--r-- 1 root root 636 2002-09-20 05:00 ./source/ap/sc/sc-7.16.lsm --rw-r--r-- 1 root root 210809 2002-09-20 05:00 ./source/ap/sc/sc-7.16.tar.gz --rw-r--r-- 1 root root 187 2008-10-23 19:40 ./source/ap/sc/sc-gcc34.diff.gz --rw-r--r-- 1 root root 208 2008-10-23 19:41 ./source/ap/sc/sc-malloc.diff.gz --rwxr-xr-x 1 root root 2764 2009-05-23 00:42 ./source/ap/sc/sc.SlackBuild --rw-r--r-- 1 root root 576 2002-02-24 21:19 ./source/ap/sc/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/ap/screen --rw-r--r-- 1 root root 741741 2006-10-23 13:10 ./source/ap/screen/screen-4.0.3.tar.bz2 --rwxr-xr-x 1 root root 3756 2009-05-23 00:42 ./source/ap/screen/screen.SlackBuild --rw-r--r-- 1 root root 1111 2002-03-23 22:34 ./source/ap/screen/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/seejpeg --rw-r--r-- 1 root root 227 2000-04-30 06:01 ./source/ap/seejpeg/_seejpeg.tar.gz --rw-r--r-- 1 root root 500701 1996-07-25 23:00 ./source/ap/seejpeg/libjpeg-6a.tar.gz --rw-r--r-- 1 root root 654 2000-04-30 05:52 ./source/ap/seejpeg/seejpeg-1.10.diff.gz --rw-r--r-- 1 root root 855 1999-11-09 00:03 ./source/ap/seejpeg/seejpeg-1.10.lsm --rw-r--r-- 1 root root 46550 1999-11-09 00:03 ./source/ap/seejpeg/seejpeg-1.10.tgz --rwxr-xr-x 1 root root 2281 2009-05-19 20:05 ./source/ap/seejpeg/seejpeg.SlackBuild --rw-r--r-- 1 root root 913 2002-03-23 22:34 ./source/ap/seejpeg/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 19:16 ./source/ap/slackpkg --rw-r--r-- 1 root root 69 2008-11-21 19:07 ./source/ap/slackpkg/README -drwxr-xr-x 2 root root 4096 2009-08-24 07:00 ./source/ap/sox --rw-r--r-- 1 root root 710 2002-03-23 22:35 ./source/ap/sox/slack-desc --rw-r--r-- 1 root root 688296 2009-06-21 20:05 ./source/ap/sox/sox-14.3.0.tar.xz --rwxr-xr-x 1 root root 2835 2009-08-24 07:00 ./source/ap/sox/sox.SlackBuild -drwxr-xr-x 2 root root 4096 2009-06-12 23:10 ./source/ap/sqlite --rw-r--r-- 1 root root 1684 2008-08-01 05:31 ./source/ap/sqlite/COPYRIGHT.gz --rw-r--r-- 1 root root 942 2008-08-01 01:21 ./source/ap/sqlite/slack-desc --rw-r--r-- 1 root root 1838140 2009-06-02 19:20 ./source/ap/sqlite/sqlite-3.6.14.2.tar.xz --rwxr-xr-x 1 root root 3381 2009-06-12 22:07 ./source/ap/sqlite/sqlite.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/sudo --rw-r--r-- 1 root root 275 2004-09-19 00:25 ./source/ap/sudo/doinst.sh.gz --rw-r--r-- 1 root root 869 2002-03-23 22:36 ./source/ap/sudo/slack-desc --rw-r--r-- 1 root root 585643 2005-11-08 18:28 ./source/ap/sudo/sudo-1.6.8p12.tar.gz --rw-r--r-- 1 root root 65 2005-11-08 18:50 ./source/ap/sudo/sudo-1.6.8p12.tar.gz.sig --rwxr-xr-x 1 root root 2765 2009-05-19 20:05 ./source/ap/sudo/sudo.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/sysstat --rw-r--r-- 1 root root 796 2006-08-15 03:11 ./source/ap/sysstat/slack-desc --rw-r--r-- 1 root root 120803 2006-07-09 09:57 ./source/ap/sysstat/sysstat-7.0.0.tar.bz2 --rwxr-xr-x 1 root root 3638 2009-05-19 20:05 ./source/ap/sysstat/sysstat.SlackBuild --rw-r--r-- 1 root root 673 2006-08-15 02:41 ./source/ap/sysstat/sysstat.etc.sysstat.diff.gz --rw-r--r-- 1 root root 498 2006-08-15 02:55 ./source/ap/sysstat/sysstat.prefix.usr.diff.gz --rw-r--r-- 1 root root 454 2006-08-15 03:04 ./source/ap/sysstat/sysstat.var.run.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/ap/texinfo --rw-r--r-- 1 root root 5853 2008-11-20 23:57 ./source/ap/texinfo/dir.gz --rw-r--r-- 1 root root 251 2008-11-21 00:01 ./source/ap/texinfo/doinst.sh.gz --rw-r--r-- 1 root root 1074 2002-03-22 20:41 ./source/ap/texinfo/slack-desc --rw-r--r-- 1 root root 1969110 2008-09-29 15:17 ./source/ap/texinfo/texinfo-4.13a.tar.bz2 --rwxr-xr-x 1 root root 2867 2009-05-23 00:42 ./source/ap/texinfo/texinfo.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/vbetool --rw-r--r-- 1 root root 833 2008-11-24 18:23 ./source/ap/vbetool/slack-desc --rw-r--r-- 1 root root 182826 2008-05-16 12:56 ./source/ap/vbetool/vbetool-1.1.tar.gz --rwxr-xr-x 1 root root 2546 2009-05-19 20:05 ./source/ap/vbetool/vbetool.SlackBuild --rw-r--r-- 1 root root 129 2008-11-24 18:23 ./source/ap/vbetool/vbetool.info -drwxr-xr-x 3 root root 4096 2009-05-28 18:09 ./source/ap/vim --rw-r--r-- 1 root root 287496 2007-09-05 04:42 ./source/ap/vim/ctags-5.7.tar.gz --rw-r--r-- 1 root root 118 2006-08-23 23:20 ./source/ap/vim/doinst.sh.gz --rw-r--r-- 1 root root 4203 2007-02-16 22:42 ./source/ap/vim/gvim.desktop --rw-r--r-- 1 root root 8249 2006-01-19 17:01 ./source/ap/vim/gvim.png -drwxr-xr-x 2 root root 12288 2009-08-25 01:11 ./source/ap/vim/patches --rw-r--r-- 1 root root 972 2008-08-17 21:03 ./source/ap/vim/patches/7.2.001.gz --rw-r--r-- 1 root root 829 2008-08-17 21:45 ./source/ap/vim/patches/7.2.002.gz --rw-r--r-- 1 root root 1380 2008-08-25 02:14 ./source/ap/vim/patches/7.2.003.gz --rw-r--r-- 1 root root 1324 2008-08-25 02:36 ./source/ap/vim/patches/7.2.004.gz --rw-r--r-- 1 root root 1621 2008-08-25 02:51 ./source/ap/vim/patches/7.2.005.gz --rw-r--r-- 1 root root 871 2008-08-25 03:04 ./source/ap/vim/patches/7.2.006.gz --rw-r--r-- 1 root root 4921 2008-09-01 14:53 ./source/ap/vim/patches/7.2.007.gz --rw-r--r-- 1 root root 934 2008-09-01 15:33 ./source/ap/vim/patches/7.2.008.gz --rw-r--r-- 1 root root 1032 2008-09-01 15:56 ./source/ap/vim/patches/7.2.009.gz --rw-r--r-- 1 root root 2228 2008-09-06 14:45 ./source/ap/vim/patches/7.2.010.gz --rw-r--r-- 1 root root 1257 2008-09-07 11:55 ./source/ap/vim/patches/7.2.011.gz --rw-r--r-- 1 root root 739 2008-09-07 13:50 ./source/ap/vim/patches/7.2.012.gz --rw-r--r-- 1 root root 1726 2008-09-07 19:49 ./source/ap/vim/patches/7.2.013.gz --rw-r--r-- 1 root root 846 2008-09-10 13:39 ./source/ap/vim/patches/7.2.014.gz --rw-r--r-- 1 root root 936 2008-09-10 16:27 ./source/ap/vim/patches/7.2.015.gz --rw-r--r-- 1 root root 2018 2008-09-14 12:43 ./source/ap/vim/patches/7.2.016.gz --rw-r--r-- 1 root root 1895 2008-09-14 13:59 ./source/ap/vim/patches/7.2.017.gz --rw-r--r-- 1 root root 774 2008-09-14 19:42 ./source/ap/vim/patches/7.2.018.gz --rw-r--r-- 1 root root 1131 2008-09-18 10:45 ./source/ap/vim/patches/7.2.019.gz --rw-r--r-- 1 root root 822 2008-09-18 18:56 ./source/ap/vim/patches/7.2.020.gz --rw-r--r-- 1 root root 1689 2008-09-18 19:30 ./source/ap/vim/patches/7.2.021.gz --rw-r--r-- 1 root root 1596 2008-09-20 14:27 ./source/ap/vim/patches/7.2.022.gz --rw-r--r-- 1 root root 992 2008-10-01 19:10 ./source/ap/vim/patches/7.2.023.gz --rw-r--r-- 1 root root 800 2008-10-02 20:49 ./source/ap/vim/patches/7.2.024.gz --rw-r--r-- 1 root root 796 2008-10-02 20:56 ./source/ap/vim/patches/7.2.025.gz --rw-r--r-- 1 root root 1362 2008-11-01 12:53 ./source/ap/vim/patches/7.2.026.gz --rw-r--r-- 1 root root 1144 2008-11-06 09:24 ./source/ap/vim/patches/7.2.027.gz --rw-r--r-- 1 root root 788 2008-11-06 10:06 ./source/ap/vim/patches/7.2.028.gz --rw-r--r-- 1 root root 690 2008-11-06 16:16 ./source/ap/vim/patches/7.2.029.gz --rw-r--r-- 1 root root 834 2008-11-06 19:47 ./source/ap/vim/patches/7.2.030.gz --rw-r--r-- 1 root root 10923 2008-11-09 12:45 ./source/ap/vim/patches/7.2.031.gz --rw-r--r-- 1 root root 795 2008-11-09 16:21 ./source/ap/vim/patches/7.2.032.gz --rw-r--r-- 1 root root 1000 2008-11-11 20:57 ./source/ap/vim/patches/7.2.033.gz --rw-r--r-- 1 root root 1057 2008-11-12 11:52 ./source/ap/vim/patches/7.2.034.gz --rw-r--r-- 1 root root 1286 2008-11-12 12:09 ./source/ap/vim/patches/7.2.035.gz --rw-r--r-- 1 root root 2305 2008-11-12 12:36 ./source/ap/vim/patches/7.2.036.gz --rw-r--r-- 1 root root 822 2008-11-12 13:10 ./source/ap/vim/patches/7.2.037.gz --rw-r--r-- 1 root root 985 2008-11-12 13:52 ./source/ap/vim/patches/7.2.038.gz --rw-r--r-- 1 root root 776 2008-11-12 14:29 ./source/ap/vim/patches/7.2.039.gz --rw-r--r-- 1 root root 986 2008-11-12 15:06 ./source/ap/vim/patches/7.2.040.gz --rw-r--r-- 1 root root 5431 2008-11-15 13:11 ./source/ap/vim/patches/7.2.041.gz --rw-r--r-- 1 root root 1757 2008-11-15 15:07 ./source/ap/vim/patches/7.2.042.gz --rw-r--r-- 1 root root 1074 2008-11-20 09:28 ./source/ap/vim/patches/7.2.043.gz --rw-r--r-- 1 root root 1818 2008-11-20 09:37 ./source/ap/vim/patches/7.2.044.gz --rw-r--r-- 1 root root 1035 2008-11-20 10:04 ./source/ap/vim/patches/7.2.045.gz --rw-r--r-- 1 root root 892 2008-11-20 10:56 ./source/ap/vim/patches/7.2.046.gz --rw-r--r-- 1 root root 1196 2008-11-20 15:12 ./source/ap/vim/patches/7.2.047.gz --rw-r--r-- 1 root root 1681 2008-11-20 15:12 ./source/ap/vim/patches/7.2.048.gz --rw-r--r-- 1 root root 6742 2008-11-20 16:10 ./source/ap/vim/patches/7.2.049.gz --rw-r--r-- 1 root root 2154 2008-11-28 09:09 ./source/ap/vim/patches/7.2.050.gz --rw-r--r-- 1 root root 3820 2008-11-28 10:01 ./source/ap/vim/patches/7.2.051.gz --rw-r--r-- 1 root root 1066 2008-11-28 10:16 ./source/ap/vim/patches/7.2.052.gz --rw-r--r-- 1 root root 849 2008-11-28 10:48 ./source/ap/vim/patches/7.2.053.gz --rw-r--r-- 1 root root 879 2008-11-28 11:06 ./source/ap/vim/patches/7.2.054.gz --rw-r--r-- 1 root root 8518 2008-11-28 20:27 ./source/ap/vim/patches/7.2.055.gz --rw-r--r-- 1 root root 846 2008-11-29 19:11 ./source/ap/vim/patches/7.2.056.gz --rw-r--r-- 1 root root 1293 2008-11-29 19:19 ./source/ap/vim/patches/7.2.057.gz --rw-r--r-- 1 root root 1183 2008-11-30 11:15 ./source/ap/vim/patches/7.2.058.gz --rw-r--r-- 1 root root 904 2008-11-30 14:16 ./source/ap/vim/patches/7.2.059.gz --rw-r--r-- 1 root root 8301 2008-11-30 20:13 ./source/ap/vim/patches/7.2.060.gz --rw-r--r-- 1 root root 966 2008-12-03 08:53 ./source/ap/vim/patches/7.2.061.gz --rw-r--r-- 1 root root 842 2008-12-03 10:22 ./source/ap/vim/patches/7.2.062.gz --rw-r--r-- 1 root root 1095 2008-12-03 11:45 ./source/ap/vim/patches/7.2.063.gz --rw-r--r-- 1 root root 922 2008-12-03 12:21 ./source/ap/vim/patches/7.2.064.gz --rw-r--r-- 1 root root 1578 2008-12-03 17:50 ./source/ap/vim/patches/7.2.065.gz --rw-r--r-- 1 root root 1155 2008-12-09 09:57 ./source/ap/vim/patches/7.2.066.gz --rw-r--r-- 1 root root 774 2008-12-09 10:20 ./source/ap/vim/patches/7.2.067.gz --rw-r--r-- 1 root root 1138 2008-12-09 11:29 ./source/ap/vim/patches/7.2.068.gz --rw-r--r-- 1 root root 827 2008-12-09 21:35 ./source/ap/vim/patches/7.2.069.gz --rw-r--r-- 1 root root 4840 2008-12-21 12:04 ./source/ap/vim/patches/7.2.070.gz --rw-r--r-- 1 root root 1147 2008-12-24 11:44 ./source/ap/vim/patches/7.2.071.gz --rw-r--r-- 1 root root 790 2008-12-31 13:03 ./source/ap/vim/patches/7.2.072.gz --rw-r--r-- 1 root root 1423 2008-12-24 11:54 ./source/ap/vim/patches/7.2.073.gz --rw-r--r-- 1 root root 922 2008-12-24 11:57 ./source/ap/vim/patches/7.2.074.gz --rw-r--r-- 1 root root 1032 2008-12-24 12:11 ./source/ap/vim/patches/7.2.075.gz --rw-r--r-- 1 root root 1330 2008-12-30 15:17 ./source/ap/vim/patches/7.2.076.gz --rw-r--r-- 1 root root 1797 2008-12-31 15:22 ./source/ap/vim/patches/7.2.077.gz --rw-r--r-- 1 root root 1310 2009-01-06 14:03 ./source/ap/vim/patches/7.2.078.gz --rw-r--r-- 1 root root 2377 2009-01-06 15:15 ./source/ap/vim/patches/7.2.079.gz --rw-r--r-- 1 root root 2883 2009-01-13 11:30 ./source/ap/vim/patches/7.2.080.gz --rw-r--r-- 1 root root 908 2009-01-13 15:39 ./source/ap/vim/patches/7.2.081.gz --rw-r--r-- 1 root root 1085 2009-01-13 15:58 ./source/ap/vim/patches/7.2.082.gz --rw-r--r-- 1 root root 852 2009-01-13 16:28 ./source/ap/vim/patches/7.2.083.gz --rw-r--r-- 1 root root 1594 2009-01-13 17:12 ./source/ap/vim/patches/7.2.084.gz --rw-r--r-- 1 root root 934 2009-01-22 17:33 ./source/ap/vim/patches/7.2.085.gz --rw-r--r-- 1 root root 1244 2009-01-22 19:49 ./source/ap/vim/patches/7.2.086.gz --rw-r--r-- 1 root root 804 2009-01-22 20:32 ./source/ap/vim/patches/7.2.087.gz --rw-r--r-- 1 root root 1254 2009-01-22 20:50 ./source/ap/vim/patches/7.2.088.gz --rw-r--r-- 1 root root 1158 2009-01-28 13:18 ./source/ap/vim/patches/7.2.089.gz --rw-r--r-- 1 root root 1521 2009-01-28 14:43 ./source/ap/vim/patches/7.2.090.gz --rw-r--r-- 1 root root 1036 2009-01-28 15:05 ./source/ap/vim/patches/7.2.091.gz --rw-r--r-- 1 root root 1839 2009-01-28 18:09 ./source/ap/vim/patches/7.2.092.gz --rw-r--r-- 1 root root 2221 2009-01-28 20:23 ./source/ap/vim/patches/7.2.093.gz --rw-r--r-- 1 root root 1373 2009-02-04 10:21 ./source/ap/vim/patches/7.2.094.gz --rw-r--r-- 1 root root 907 2009-02-04 10:46 ./source/ap/vim/patches/7.2.095.gz --rw-r--r-- 1 root root 759 2009-02-04 12:15 ./source/ap/vim/patches/7.2.096.gz --rw-r--r-- 1 root root 933 2009-02-04 13:19 ./source/ap/vim/patches/7.2.097.gz --rw-r--r-- 1 root root 843 2009-02-04 15:27 ./source/ap/vim/patches/7.2.098.gz --rw-r--r-- 1 root root 1459 2009-02-04 16:29 ./source/ap/vim/patches/7.2.099.gz --rw-r--r-- 1 root root 1654 2009-02-04 16:51 ./source/ap/vim/patches/7.2.100.gz --rw-r--r-- 1 root root 755 2009-02-04 17:35 ./source/ap/vim/patches/7.2.101.gz --rw-r--r-- 1 root root 813 2009-02-05 19:48 ./source/ap/vim/patches/7.2.102.gz --rw-r--r-- 1 root root 1643 2009-02-11 10:35 ./source/ap/vim/patches/7.2.103.gz --rw-r--r-- 1 root root 881 2009-02-11 15:04 ./source/ap/vim/patches/7.2.104.gz --rw-r--r-- 1 root root 1034 2009-02-11 15:47 ./source/ap/vim/patches/7.2.105.gz --rw-r--r-- 1 root root 1380 2009-02-11 16:59 ./source/ap/vim/patches/7.2.106.gz --rw-r--r-- 1 root root 917 2009-02-11 17:48 ./source/ap/vim/patches/7.2.107.gz --rw-r--r-- 1 root root 891 2009-02-11 21:48 ./source/ap/vim/patches/7.2.108.gz --rw-r--r-- 1 root root 4064 2009-02-21 19:29 ./source/ap/vim/patches/7.2.109.gz --rw-r--r-- 1 root root 731 2009-02-21 19:38 ./source/ap/vim/patches/7.2.110.gz --rw-r--r-- 1 root root 1151 2009-02-21 20:12 ./source/ap/vim/patches/7.2.111.gz --rw-r--r-- 1 root root 827 2009-02-21 20:26 ./source/ap/vim/patches/7.2.112.gz --rw-r--r-- 1 root root 1079 2009-02-21 21:04 ./source/ap/vim/patches/7.2.113.gz --rw-r--r-- 1 root root 1001 2009-02-21 21:14 ./source/ap/vim/patches/7.2.114.gz --rw-r--r-- 1 root root 1192 2009-02-21 21:30 ./source/ap/vim/patches/7.2.115.gz --rw-r--r-- 1 root root 898 2009-02-21 21:58 ./source/ap/vim/patches/7.2.116.gz --rw-r--r-- 1 root root 1090 2009-02-21 23:03 ./source/ap/vim/patches/7.2.117.gz --rw-r--r-- 1 root root 979 2009-02-21 23:59 ./source/ap/vim/patches/7.2.118.gz --rw-r--r-- 1 root root 759 2009-02-22 00:15 ./source/ap/vim/patches/7.2.119.gz --rw-r--r-- 1 root root 2555 2009-02-22 01:38 ./source/ap/vim/patches/7.2.120.gz --rw-r--r-- 1 root root 1839 2009-02-22 05:54 ./source/ap/vim/patches/7.2.121.gz --rw-r--r-- 1 root root 1243 2009-02-22 20:14 ./source/ap/vim/patches/7.2.122.gz --rw-r--r-- 1 root root 874 2009-02-22 22:44 ./source/ap/vim/patches/7.2.123.gz --rw-r--r-- 1 root root 1315 2009-02-22 23:55 ./source/ap/vim/patches/7.2.124.gz --rw-r--r-- 1 root root 1454 2009-02-24 03:12 ./source/ap/vim/patches/7.2.125.gz --rw-r--r-- 1 root root 1784 2009-02-24 03:30 ./source/ap/vim/patches/7.2.126.gz --rw-r--r-- 1 root root 881 2009-02-24 03:38 ./source/ap/vim/patches/7.2.127.gz --rw-r--r-- 1 root root 815 2009-03-01 01:46 ./source/ap/vim/patches/7.2.128.gz --rw-r--r-- 1 root root 1012 2009-03-02 01:13 ./source/ap/vim/patches/7.2.129.gz --rw-r--r-- 1 root root 4075 2009-03-02 01:46 ./source/ap/vim/patches/7.2.130.gz --rw-r--r-- 1 root root 1138 2009-03-04 03:17 ./source/ap/vim/patches/7.2.131.gz --rw-r--r-- 1 root root 2826 2009-03-05 02:16 ./source/ap/vim/patches/7.2.132.gz --rw-r--r-- 1 root root 856 2009-03-11 11:47 ./source/ap/vim/patches/7.2.133.gz --rw-r--r-- 1 root root 960 2009-03-11 12:11 ./source/ap/vim/patches/7.2.134.gz --rw-r--r-- 1 root root 940 2009-03-11 14:10 ./source/ap/vim/patches/7.2.135.gz --rw-r--r-- 1 root root 740 2009-03-11 14:37 ./source/ap/vim/patches/7.2.136.gz --rw-r--r-- 1 root root 3549 2009-03-11 15:29 ./source/ap/vim/patches/7.2.137.gz --rw-r--r-- 1 root root 1347 2009-03-11 15:37 ./source/ap/vim/patches/7.2.138.gz --rw-r--r-- 1 root root 995 2009-03-11 16:29 ./source/ap/vim/patches/7.2.139.gz --rw-r--r-- 1 root root 984 2009-03-11 16:46 ./source/ap/vim/patches/7.2.140.gz --rw-r--r-- 1 root root 2187 2009-03-11 16:58 ./source/ap/vim/patches/7.2.141.gz --rw-r--r-- 1 root root 886 2009-03-18 11:22 ./source/ap/vim/patches/7.2.142.gz --rw-r--r-- 1 root root 2618 2009-03-18 11:52 ./source/ap/vim/patches/7.2.143.gz --rw-r--r-- 1 root root 1053 2009-03-18 13:22 ./source/ap/vim/patches/7.2.144.gz --rw-r--r-- 1 root root 1396 2009-03-18 13:34 ./source/ap/vim/patches/7.2.145.gz --rw-r--r-- 1 root root 1461 2009-03-18 14:41 ./source/ap/vim/patches/7.2.146.gz --rw-r--r-- 1 root root 791 2009-03-18 15:29 ./source/ap/vim/patches/7.2.147.gz --rw-r--r-- 1 root root 1566 2009-03-20 11:33 ./source/ap/vim/patches/7.2.148.gz --rw-r--r-- 1 root root 4591 2009-04-22 10:56 ./source/ap/vim/patches/7.2.149.gz --rw-r--r-- 1 root root 6762 2009-04-22 11:08 ./source/ap/vim/patches/7.2.150.gz --rw-r--r-- 1 root root 782 2009-04-22 11:52 ./source/ap/vim/patches/7.2.151.gz --rw-r--r-- 1 root root 1353 2009-04-22 12:44 ./source/ap/vim/patches/7.2.152.gz --rw-r--r-- 1 root root 1187 2009-04-22 13:39 ./source/ap/vim/patches/7.2.153.gz --rw-r--r-- 1 root root 1144 2009-04-22 13:58 ./source/ap/vim/patches/7.2.154.gz --rw-r--r-- 1 root root 710 2009-04-22 14:10 ./source/ap/vim/patches/7.2.155.gz --rw-r--r-- 1 root root 1842 2009-04-22 14:24 ./source/ap/vim/patches/7.2.156.gz --rw-r--r-- 1 root root 1572 2009-04-22 15:45 ./source/ap/vim/patches/7.2.157.gz --rw-r--r-- 1 root root 958 2009-04-22 15:45 ./source/ap/vim/patches/7.2.158.gz --rw-r--r-- 1 root root 918 2009-04-22 15:53 ./source/ap/vim/patches/7.2.159.gz --rw-r--r-- 1 root root 705 2009-04-22 16:45 ./source/ap/vim/patches/7.2.160.gz --rw-r--r-- 1 root root 1802 2009-04-29 09:03 ./source/ap/vim/patches/7.2.161.gz --rw-r--r-- 1 root root 1029 2009-04-29 09:53 ./source/ap/vim/patches/7.2.162.gz --rw-r--r-- 1 root root 962 2009-04-29 15:42 ./source/ap/vim/patches/7.2.163.gz --rw-r--r-- 1 root root 1471 2009-04-29 15:42 ./source/ap/vim/patches/7.2.164.gz --rw-r--r-- 1 root root 828 2009-04-29 16:04 ./source/ap/vim/patches/7.2.165.gz --rw-r--r-- 1 root root 3389 2009-04-29 16:47 ./source/ap/vim/patches/7.2.166.gz --rw-r--r-- 1 root root 13059 2009-05-13 12:09 ./source/ap/vim/patches/7.2.167.gz --rw-r--r-- 1 root root 1051 2009-05-13 12:50 ./source/ap/vim/patches/7.2.168.gz --rw-r--r-- 1 root root 8954 2009-05-13 16:56 ./source/ap/vim/patches/7.2.169.gz --rw-r--r-- 1 root root 1387 2009-05-13 18:48 ./source/ap/vim/patches/7.2.170.gz --rw-r--r-- 1 root root 1004 2009-05-14 19:52 ./source/ap/vim/patches/7.2.171.gz --rw-r--r-- 1 root root 983 2009-05-14 20:01 ./source/ap/vim/patches/7.2.172.gz --rw-r--r-- 1 root root 4735 2009-05-14 20:20 ./source/ap/vim/patches/7.2.173.gz --rw-r--r-- 1 root root 9716 2009-05-15 19:32 ./source/ap/vim/patches/7.2.174.gz --rw-r--r-- 1 root root 735 2009-05-16 14:16 ./source/ap/vim/patches/7.2.175.gz --rw-r--r-- 1 root root 2061 2009-05-16 14:37 ./source/ap/vim/patches/7.2.176.gz --rw-r--r-- 1 root root 10066 2009-05-16 15:31 ./source/ap/vim/patches/7.2.177.gz --rw-r--r-- 1 root root 1390 2009-05-16 19:07 ./source/ap/vim/patches/7.2.178.gz --rw-r--r-- 1 root root 1233 2009-05-17 09:59 ./source/ap/vim/patches/7.2.179.gz --rw-r--r-- 1 root root 25733 2009-05-17 11:31 ./source/ap/vim/patches/7.2.180.gz --rw-r--r-- 1 root root 11581 2009-05-17 14:24 ./source/ap/vim/patches/7.2.181.gz --rw-r--r-- 1 root root 988 2009-05-17 21:26 ./source/ap/vim/patches/7.2.182.gz --rw-r--r-- 1 root root 9233 2009-05-21 13:21 ./source/ap/vim/patches/7.2.183.gz --rw-r--r-- 1 root root 16204 2009-05-21 21:26 ./source/ap/vim/patches/7.2.184.gz --rw-r--r-- 1 root root 2598 2009-05-22 16:21 ./source/ap/vim/patches/7.2.185.gz --rw-r--r-- 1 root root 1610 2009-05-22 19:08 ./source/ap/vim/patches/7.2.186.gz --rw-r--r-- 1 root root 1211 2009-05-23 12:28 ./source/ap/vim/patches/7.2.187.gz --rw-r--r-- 1 root root 2785 2009-05-24 11:41 ./source/ap/vim/patches/7.2.188.gz --rw-r--r-- 1 root root 1195 2009-05-26 09:03 ./source/ap/vim/patches/7.2.189.gz --rw-r--r-- 1 root root 1894 2009-05-26 16:13 ./source/ap/vim/patches/7.2.190.gz --rw-r--r-- 1 root root 22827 2009-05-26 20:59 ./source/ap/vim/patches/7.2.191.gz --rw-r--r-- 1 root root 1455 2009-06-03 11:22 ./source/ap/vim/patches/7.2.192.gz --rw-r--r-- 1 root root 759 2009-06-03 12:26 ./source/ap/vim/patches/7.2.193.gz --rw-r--r-- 1 root root 741 2009-06-03 13:05 ./source/ap/vim/patches/7.2.194.gz --rw-r--r-- 1 root root 1054 2009-06-03 20:06 ./source/ap/vim/patches/7.2.195.gz --rw-r--r-- 1 root root 1474 2009-06-03 20:08 ./source/ap/vim/patches/7.2.196.gz --rw-r--r-- 1 root root 778 2009-06-10 16:16 ./source/ap/vim/patches/7.2.197.gz --rw-r--r-- 1 root root 967 2009-06-16 09:08 ./source/ap/vim/patches/7.2.198.gz --rw-r--r-- 1 root root 860 2009-06-16 12:32 ./source/ap/vim/patches/7.2.199.gz --rw-r--r-- 1 root root 3075 2009-06-16 13:12 ./source/ap/vim/patches/7.2.200.gz --rw-r--r-- 1 root root 4092 2009-06-16 13:23 ./source/ap/vim/patches/7.2.201.gz --rw-r--r-- 1 root root 996 2009-06-16 13:36 ./source/ap/vim/patches/7.2.202.gz --rw-r--r-- 1 root root 9493 2009-06-16 14:02 ./source/ap/vim/patches/7.2.203.gz --rw-r--r-- 1 root root 1525 2009-06-16 14:35 ./source/ap/vim/patches/7.2.204.gz --rw-r--r-- 1 root root 1150 2009-06-16 14:45 ./source/ap/vim/patches/7.2.205.gz --rw-r--r-- 1 root root 809 2009-06-16 15:23 ./source/ap/vim/patches/7.2.206.gz --rw-r--r-- 1 root root 1183 2009-06-16 15:23 ./source/ap/vim/patches/7.2.207.gz --rw-r--r-- 1 root root 1250 2009-06-16 15:51 ./source/ap/vim/patches/7.2.208.gz --rw-r--r-- 1 root root 1125 2009-06-16 16:16 ./source/ap/vim/patches/7.2.209.gz --rw-r--r-- 1 root root 914 2009-06-24 09:59 ./source/ap/vim/patches/7.2.210.gz --rw-r--r-- 1 root root 799 2009-06-24 14:26 ./source/ap/vim/patches/7.2.211.gz --rw-r--r-- 1 root root 846 2009-06-24 14:41 ./source/ap/vim/patches/7.2.212.gz --rw-r--r-- 1 root root 761 2009-06-24 14:51 ./source/ap/vim/patches/7.2.213.gz --rw-r--r-- 1 root root 888 2009-06-24 15:05 ./source/ap/vim/patches/7.2.214.gz --rw-r--r-- 1 root root 2692 2009-06-24 15:32 ./source/ap/vim/patches/7.2.215.gz --rw-r--r-- 1 root root 1668 2009-06-24 15:51 ./source/ap/vim/patches/7.2.216.gz --rw-r--r-- 1 root root 924 2009-06-24 16:08 ./source/ap/vim/patches/7.2.217.gz --rw-r--r-- 1 root root 765 2009-06-24 16:32 ./source/ap/vim/patches/7.2.218.gz --rw-r--r-- 1 root root 981 2009-07-01 14:13 ./source/ap/vim/patches/7.2.219.gz --rw-r--r-- 1 root root 1189 2009-07-01 15:13 ./source/ap/vim/patches/7.2.220.gz --rw-r--r-- 1 root root 2458 2009-07-01 16:02 ./source/ap/vim/patches/7.2.221.gz --rw-r--r-- 1 root root 980 2009-07-01 18:19 ./source/ap/vim/patches/7.2.222.gz --rw-r--r-- 1 root root 1935 2009-07-09 13:56 ./source/ap/vim/patches/7.2.223.gz --rw-r--r-- 1 root root 1164 2009-07-09 16:16 ./source/ap/vim/patches/7.2.224.gz --rw-r--r-- 1 root root 1237 2009-07-09 16:24 ./source/ap/vim/patches/7.2.225.gz --rw-r--r-- 1 root root 2108 2009-07-09 18:06 ./source/ap/vim/patches/7.2.226.gz --rw-r--r-- 1 root root 773 2009-07-09 18:14 ./source/ap/vim/patches/7.2.227.gz --rw-r--r-- 1 root root 4016 2009-07-09 19:22 ./source/ap/vim/patches/7.2.228.gz --rw-r--r-- 1 root root 776 2009-07-14 10:20 ./source/ap/vim/patches/7.2.229.gz --rw-r--r-- 1 root root 932 2009-07-14 11:45 ./source/ap/vim/patches/7.2.230.gz --rw-r--r-- 1 root root 827 2009-07-14 14:05 ./source/ap/vim/patches/7.2.231.gz --rw-r--r-- 1 root root 1232 2009-07-14 15:39 ./source/ap/vim/patches/7.2.232.gz --rw-r--r-- 1 root root 1228 2009-07-14 16:38 ./source/ap/vim/patches/7.2.233.gz --rw-r--r-- 1 root root 1397 2009-07-14 19:42 ./source/ap/vim/patches/7.2.234.gz --rw-r--r-- 1 root root 1129 2009-07-22 09:06 ./source/ap/vim/patches/7.2.235.gz --rw-r--r-- 1 root root 1016 2009-07-22 09:17 ./source/ap/vim/patches/7.2.236.gz --rw-r--r-- 1 root root 788 2009-07-22 11:28 ./source/ap/vim/patches/7.2.237.gz --rw-r--r-- 1 root root 1526 2009-07-22 12:28 ./source/ap/vim/patches/7.2.238.gz --rw-r--r-- 1 root root 1653 2009-07-22 14:23 ./source/ap/vim/patches/7.2.239.gz --rw-r--r-- 1 root root 1074 2009-07-29 09:11 ./source/ap/vim/patches/7.2.240.gz --rw-r--r-- 1 root root 2103 2009-07-29 10:11 ./source/ap/vim/patches/7.2.241.gz --rw-r--r-- 1 root root 1091 2009-07-29 13:42 ./source/ap/vim/patches/7.2.242.gz --rw-r--r-- 1 root root 954 2009-07-29 14:09 ./source/ap/vim/patches/7.2.243.gz --rw-r--r-- 1 root root 1843 2009-07-29 16:07 ./source/ap/vim/patches/7.2.244.gz --rw-r--r-- 1 root root 1759 2009-07-29 16:31 ./source/ap/vim/patches/7.2.245.gz --rw-r--r-- 1 root root 839 2006-07-21 04:09 ./source/ap/vim/slack-desc.vim --rw-r--r-- 1 root root 964 2006-07-21 06:24 ./source/ap/vim/slack-desc.vim-gvim --rw-r--r-- 1 root root 565740 2008-08-09 16:48 ./source/ap/vim/vim-7.2-lang.tar.xz --rw-r--r-- 1 root root 5866332 2008-09-06 14:35 ./source/ap/vim/vim-7.2.tar.xz --rwxr-xr-x 1 root root 5712 2009-05-28 18:24 ./source/ap/vim/vim-gvim.SlackBuild --rwxr-xr-x 1 root root 6007 2009-05-28 18:24 ./source/ap/vim/vim.SlackBuild --rw-r--r-- 1 root root 303 2009-05-28 18:19 ./source/ap/vim/vim.vimrc.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/vorbis-tools --rw-r--r-- 1 root root 1071 2003-12-19 00:21 ./source/ap/vorbis-tools/slack-desc --rw-r--r-- 1 root root 739539 2008-03-03 06:30 ./source/ap/vorbis-tools/vorbis-tools-1.2.0.tar.bz2 --rwxr-xr-x 1 root root 2426 2009-05-19 20:05 ./source/ap/vorbis-tools/vorbis-tools.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/workbone --rw-r--r-- 1 root root 689 2002-03-23 22:37 ./source/ap/workbone/slack-desc --rw-r--r-- 1 root root 262 2003-02-14 08:22 ./source/ap/workbone/workbone.1.diff.gz --rwxr-xr-x 1 root root 2275 2009-05-19 20:05 ./source/ap/workbone/workbone.SlackBuild --rw-r--r-- 1 root root 3330 2002-04-24 15:17 ./source/ap/workbone/workbone_2.40-3.diff.gz --rw-r--r-- 1 root root 21877 1998-10-15 07:00 ./source/ap/workbone/workbone_2.40.orig.tar.gz -drwxr-xr-x 2 root root 4096 2009-06-13 04:43 ./source/ap/xfsdump --rw-r--r-- 1 root root 983 2006-02-22 20:00 ./source/ap/xfsdump/slack-desc --rw-r--r-- 1 root root 560820 2009-05-05 17:21 ./source/ap/xfsdump/xfsdump-3.0.1.tar.xz --rwxr-xr-x 1 root root 3205 2009-06-13 04:43 ./source/ap/xfsdump/xfsdump.SlackBuild --rw-r--r-- 1 root root 509 2008-04-01 05:07 ./source/ap/xfsdump/xfsdump.destdir.diff.gz -drwxr-xr-x 2 root root 4096 2009-07-15 04:39 ./source/ap/zsh --rw-r--r-- 1 root root 140 2007-04-10 01:12 ./source/ap/zsh/doinst.sh.gz --rw-r--r-- 1 root root 962 2002-02-14 08:13 ./source/ap/zsh/slack-desc --rw-r--r-- 1 root root 560 2009-07-15 04:38 ./source/ap/zsh/zsh-4.3.10-add_new_pkg_completion.diff.gz --rw-r--r-- 1 root root 2533240 2009-07-15 04:33 ./source/ap/zsh/zsh-4.3.10-doc.tar.xz --rw-r--r-- 1 root root 2302728 2009-07-15 04:34 ./source/ap/zsh/zsh-4.3.10.tar.xz --rwxr-xr-x 1 root root 3391 2009-07-16 00:05 ./source/ap/zsh/zsh.SlackBuild -drwxr-xr-x 39 root root 4096 2009-08-11 00:57 ./source/d -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/autoconf --rw-r--r-- 1 root root 1195259 2008-09-26 20:15 ./source/d/autoconf/autoconf-2.63.tar.bz2 --rwxr-xr-x 1 root root 2165 2009-05-19 20:05 ./source/d/autoconf/autoconf.SlackBuild --rw-r--r-- 1 root root 339 2001-05-30 01:40 ./source/d/autoconf/doinst.sh.gz --rw-r--r-- 1 root root 1090 2002-03-23 22:38 ./source/d/autoconf/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/automake --rw-r--r-- 1 root root 918341 2008-09-26 20:15 ./source/d/automake/automake-1.10.1.tar.bz2 --rwxr-xr-x 1 root root 2590 2009-05-19 20:05 ./source/d/automake/automake.SlackBuild --rw-r--r-- 1 root root 348 2001-05-30 01:49 ./source/d/automake/doinst.sh.gz --rw-r--r-- 1 root root 1086 2002-03-23 22:39 ./source/d/automake/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-25 20:50 ./source/d/binutils --rw-r--r-- 1 root root 15081266 2008-10-14 19:21 ./source/d/binutils/binutils-2.18.50.0.9.tar.bz2 --rwxr-xr-x 1 root root 3953 2009-05-24 18:28 ./source/d/binutils/binutils.SlackBuild --rw-r--r-- 1 root root 36546 2008-08-23 18:53 ./source/d/binutils/release.binutils-2.18.50.0.9 --rw-r--r-- 1 root root 902 2002-03-22 21:41 ./source/d/binutils/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/bison --rw-r--r-- 1 root root 1467784 2008-12-11 22:29 ./source/d/bison/bison-2.4.1.tar.bz2 --rw-r--r-- 1 root root 65 2008-12-11 22:29 ./source/d/bison/bison-2.4.1.tar.bz2.sig --rwxr-xr-x 1 root root 2556 2009-05-19 20:05 ./source/d/bison/bison.SlackBuild --rw-r--r-- 1 root root 927 2002-03-23 22:41 ./source/d/bison/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/ccache --rw-r--r-- 1 root root 86363 2004-09-13 20:14 ./source/d/ccache/ccache-2.4.tar.gz --rwxr-xr-x 1 root root 2171 2009-05-19 20:05 ./source/d/ccache/ccache.SlackBuild --rw-r--r-- 1 root root 771 2003-03-18 06:44 ./source/d/ccache/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/d/clisp --rw-r--r-- 1 root root 7543689 2008-10-24 02:33 ./source/d/clisp/clisp-2.47.tar.bz2 --rw-r--r-- 1 root root 65 2008-10-24 02:33 ./source/d/clisp/clisp-2.47.tar.bz2.sig --rwxr-xr-x 1 root root 5482 2009-05-23 00:41 ./source/d/clisp/clisp.SlackBuild --rw-r--r-- 1 root root 898945 2008-09-11 09:39 ./source/d/clisp/ffcall-20080704cvs.tar.bz2 --rw-r--r-- 1 root root 281651 2008-08-24 23:36 ./source/d/clisp/libsigsegv-2.6.tar.bz2 --rw-r--r-- 1 root root 1121 2003-07-17 21:01 ./source/d/clisp/slack-desc --rwxr-xr-x 1 root root 242 2008-09-11 11:59 ./source/d/clisp/source.download -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/d/cmake --rw-r--r-- 1 root root 2713258 2008-09-25 14:28 ./source/d/cmake/cmake-2.6.2.tar.bz2 --rwxr-xr-x 1 root root 2766 2009-05-23 00:41 ./source/d/cmake/cmake.SlackBuild --rw-r--r-- 1 root root 852 2008-04-09 20:37 ./source/d/cmake/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/d/cscope --rw-r--r-- 1 root root 332824 2006-09-30 21:37 ./source/d/cscope/cscope-15.6.tar.bz2 --rwxr-xr-x 1 root root 2350 2009-05-23 00:41 ./source/d/cscope/cscope.SlackBuild --rw-r--r-- 1 root root 805 2003-08-20 00:37 ./source/d/cscope/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/cvs --rw-r--r-- 1 root root 2942652 2008-05-08 04:58 ./source/d/cvs/cvs-1.11.23.tar.bz2 --rw-r--r-- 1 root root 65 2008-05-08 04:58 ./source/d/cvs/cvs-1.11.23.tar.bz2.sig --rwxr-xr-x 1 root root 2850 2009-05-19 20:05 ./source/d/cvs/cvs.SlackBuild --rw-r--r-- 1 root root 992 2002-02-23 03:00 ./source/d/cvs/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/d/dev86 --rw-r--r-- 1 root root 703028 2007-10-16 12:48 ./source/d/dev86/Dev86src-0.16.17.tar.gz --rw-r--r-- 1 root root 408 2008-03-28 23:59 ./source/d/dev86/README --rw-r--r-- 1 root root 361 2008-09-23 19:43 ./source/d/dev86/dev86-x86_64.noelks.patch.gz --rw-r--r-- 1 root root 342 2008-09-22 21:52 ./source/d/dev86/dev86-x86_64.patch.gz --rwxr-xr-x 1 root root 3352 2009-05-23 00:41 ./source/d/dev86/dev86.SlackBuild --rw-r--r-- 1 root root 312 2008-03-29 05:05 ./source/d/dev86/dev86.info --rw-r--r-- 1 root root 490 2008-09-18 05:36 ./source/d/dev86/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/distcc --rw-r--r-- 1 root root 341601 2004-12-22 00:09 ./source/d/distcc/distcc-2.18.3.tar.bz2 --rw-r--r-- 1 root root 189 2004-12-22 00:09 ./source/d/distcc/distcc-2.18.3.tar.bz2.asc --rwxr-xr-x 1 root root 2645 2009-05-19 20:05 ./source/d/distcc/distcc.SlackBuild --rw-r--r-- 1 root root 940 2003-02-19 22:05 ./source/d/distcc/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 02:19 ./source/d/doxygen --rw-r--r-- 1 root root 3331513 2008-12-27 13:14 ./source/d/doxygen/doxygen-1.5.8.src.tar.bz2 --rwxr-xr-x 1 root root 2971 2009-05-19 20:05 ./source/d/doxygen/doxygen.SlackBuild --rw-r--r-- 1 root root 331 2009-03-09 19:22 ./source/d/doxygen/doxygen.qt4.diff.gz --rw-r--r-- 1 root root 969 2008-02-11 03:44 ./source/d/doxygen/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/flex --rw-r--r-- 1 root root 1256501 2008-02-26 21:40 ./source/d/flex/flex-2.5.35.tar.bz2 --rwxr-xr-x 1 root root 3290 2009-05-19 20:05 ./source/d/flex/flex.SlackBuild --rw-r--r-- 1 root root 786 2006-09-20 03:05 ./source/d/flex/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-25 20:50 ./source/d/gcc --rw-r--r-- 1 root root 1377431 2007-07-27 21:07 ./source/d/gcc/ecj-4.3.jar --rw-r--r-- 1 root root 48427828 2009-01-24 13:42 ./source/d/gcc/gcc-4.3.3.tar.xz --rw-r--r-- 1 root root 522 2009-01-29 07:18 ./source/d/gcc/gcc-no_fixincludes.diff.gz --rwxr-xr-x 1 root root 19164 2009-05-24 17:41 ./source/d/gcc/gcc.SlackBuild --rw-r--r-- 1 root root 756 2002-02-21 23:00 ./source/d/gcc/slack-desc.gcc --rw-r--r-- 1 root root 753 2002-02-21 23:00 ./source/d/gcc/slack-desc.gcc-g++ --rw-r--r-- 1 root root 1231 2007-11-08 22:00 ./source/d/gcc/slack-desc.gcc-gfortran --rw-r--r-- 1 root root 843 2006-07-30 03:26 ./source/d/gcc/slack-desc.gcc-gnat --rw-r--r-- 1 root root 817 2006-07-30 03:26 ./source/d/gcc/slack-desc.gcc-java --rw-r--r-- 1 root root 962 2006-07-30 03:27 ./source/d/gcc/slack-desc.gcc-objc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/d/gdb --rw-r--r-- 1 root root 15581509 2008-03-27 18:46 ./source/d/gdb/gdb-6.8.tar.bz2 --rw-r--r-- 1 root root 65 2008-03-27 18:46 ./source/d/gdb/gdb-6.8.tar.bz2.sig --rwxr-xr-x 1 root root 3434 2009-05-23 00:41 ./source/d/gdb/gdb.SlackBuild --rw-r--r-- 1 root root 1211 2008-02-11 03:44 ./source/d/gdb/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-02 02:06 ./source/d/git --rw-r--r-- 1 root root 248 2009-07-29 08:18 ./source/d/git/git-1.6.4.tar.sign --rw-r--r-- 1 root root 1950436 2009-07-29 08:18 ./source/d/git/git-1.6.4.tar.xz --rwxr-xr-x 1 root root 4273 2009-08-02 03:02 ./source/d/git/git.SlackBuild --rw-r--r-- 1 root root 851 2009-05-30 01:25 ./source/d/git/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/gperf --rw-r--r-- 1 root root 708380 2007-05-08 16:14 ./source/d/gperf/gperf-3.0.3.tar.bz2 --rwxr-xr-x 1 root root 3061 2009-05-19 20:05 ./source/d/gperf/gperf.SlackBuild --rw-r--r-- 1 root root 1018 2007-02-14 20:50 ./source/d/gperf/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-10 23:18 ./source/d/guile --rw-r--r-- 1 root root 2303124 2009-07-05 20:52 ./source/d/guile/guile-1.8.7.tar.xz --rwxr-xr-x 1 root root 3040 2009-08-11 00:57 ./source/d/guile/guile.SlackBuild --rw-r--r-- 1 root root 894 2008-02-11 03:44 ./source/d/guile/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/indent --rw-r--r-- 1 root root 531879 2009-03-04 04:05 ./source/d/indent/indent-2.2.10.tar.bz2 --rwxr-xr-x 1 root root 3283 2009-05-19 20:05 ./source/d/indent/indent.SlackBuild --rw-r--r-- 1 root root 889 2009-03-04 04:05 ./source/d/indent/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/intltool --rw-r--r-- 1 root root 141110 2008-10-15 02:52 ./source/d/intltool/intltool-0.40.5.tar.bz2 --rwxr-xr-x 1 root root 3124 2009-05-19 20:05 ./source/d/intltool/intltool.SlackBuild --rw-r--r-- 1 root root 692 2008-09-18 04:58 ./source/d/intltool/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-29 19:19 ./source/d/kernel-headers --rw-r--r-- 1 root root 797 2003-09-04 03:56 ./source/d/kernel-headers/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/libtool --rw-r--r-- 1 root root 385 2000-06-19 08:58 ./source/d/libtool/doinst.sh.gz --rw-r--r-- 1 root root 1875269 2008-09-29 15:20 ./source/d/libtool/libtool-1.5.26.tar.bz2 --rwxr-xr-x 1 root root 2781 2009-05-19 20:05 ./source/d/libtool/libtool.SlackBuild --rw-r--r-- 1 root root 380 2008-10-01 19:00 ./source/d/libtool/libtool.no.moved.warning.diff.gz --rw-r--r-- 1 root root 958 2002-03-23 22:44 ./source/d/libtool/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-14 03:01 ./source/d/m4 --rw-r--r-- 1 root root 835808 2009-04-01 14:55 ./source/d/m4/m4-1.4.13.tar.xz --rwxr-xr-x 1 root root 3538 2009-06-12 22:09 ./source/d/m4/m4.SlackBuild --rw-r--r-- 1 root root 928 2008-10-15 04:26 ./source/d/m4/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/make --rw-r--r-- 1 root root 1151445 2006-04-01 06:48 ./source/d/make/make-3.81.tar.bz2 --rw-r--r-- 1 root root 65 2006-04-01 06:49 ./source/d/make/make-3.81.tar.bz2.sig --rwxr-xr-x 1 root root 2696 2009-05-19 20:05 ./source/d/make/make.SlackBuild --rw-r--r-- 1 root root 923 2002-03-23 22:51 ./source/d/make/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/mercurial --rw-r--r-- 1 root root 944023 2009-03-20 23:26 ./source/d/mercurial/mercurial-1.2.1.tar.bz2 --rwxr-xr-x 1 root root 2239 2009-05-19 20:05 ./source/d/mercurial/mercurial.SlackBuild --rw-r--r-- 1 root root 1253 2006-05-14 00:35 ./source/d/mercurial/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/nasm --rw-r--r-- 1 root root 791984 2008-10-29 21:24 ./source/d/nasm/nasm-2.05.01.tar.bz2 --rwxr-xr-x 1 root root 2427 2009-05-19 20:05 ./source/d/nasm/nasm.SlackBuild --rw-r--r-- 1 root root 765 2002-05-28 01:27 ./source/d/nasm/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/oprofile --rw-r--r-- 1 root root 896285 2008-07-17 23:29 ./source/d/oprofile/oprofile-0.9.4.tar.bz2 --rwxr-xr-x 1 root root 2882 2009-06-09 18:32 ./source/d/oprofile/oprofile.SlackBuild --rw-r--r-- 1 root root 965 2003-09-08 04:40 ./source/d/oprofile/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/p2c --rw-r--r-- 1 root root 409 2007-06-02 17:34 ./source/d/p2c/_p2c.tar.gz --rw-r--r-- 1 root root 423399 1996-07-04 13:29 ./source/d/p2c/p2c-1.21alpha2.tar.gz --rwxr-xr-x 1 root root 4107 2009-05-19 20:05 ./source/d/p2c/p2c.SlackBuild --rw-r--r-- 1 root root 268 2007-06-02 17:54 ./source/d/p2c/p2c.examples.diff.gz --rw-r--r-- 1 root root 4450 2005-05-05 14:47 ./source/d/p2c/p2c_1.21alpha2-2.1.diff.gz --rw-r--r-- 1 root root 168 2008-10-31 22:43 ./source/d/p2c/p2c_time.diff.gz --rw-r--r-- 1 root root 1000 2002-03-23 22:52 ./source/d/p2c/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 02:15 ./source/d/perl --rw-r--r-- 1 root root 125033 2008-08-15 14:06 ./source/d/perl/DBD-mysql-4.008.tar.gz --rw-r--r-- 1 root root 504385 2008-07-22 21:50 ./source/d/perl/DBI-1.607.tar.gz --rw-r--r-- 1 root root 96676 2008-06-16 09:04 ./source/d/perl/URI-1.37.tar.gz --rw-r--r-- 1 root root 230002 2007-11-20 14:35 ./source/d/perl/XML-Parser-2.36.tar.gz --rw-r--r-- 1 root root 71129 2007-08-15 10:39 ./source/d/perl/XML-Simple-2.18.tar.gz --rw-r--r-- 1 root root 304 2008-09-07 22:44 ./source/d/perl/doinst.sh.gz --rw-r--r-- 1 root root 12426022 2007-12-18 17:41 ./source/d/perl/perl-5.10.0.tar.bz2 --rwxr-xr-x 1 root root 8128 2009-05-23 00:41 ./source/d/perl/perl.SlackBuild --rw-r--r-- 1 root root 606 2008-09-21 00:04 ./source/d/perl/perl.configure.multilib.patch.gz --rw-r--r-- 1 root root 971 2002-07-23 05:23 ./source/d/perl/slack-desc -drwxr-xr-x 3 root root 4096 2009-06-06 21:40 ./source/d/pkg-config --rw-r--r-- 1 root root 143 2008-04-09 21:47 ./source/d/pkg-config/doinst.sh.gz --rw-r--r-- 1 root root 749443 2008-01-16 22:54 ./source/d/pkg-config/pkg-config-0.23.tar.bz2 --rwxr-xr-x 1 root root 3092 2009-06-06 21:18 ./source/d/pkg-config/pkg-config.SlackBuild -drwxr-xr-x 2 root root 4096 2006-08-20 04:13 ./source/d/pkg-config/scripts --rwxr-xr-x 1 root root 194 2007-05-24 05:41 ./source/d/pkg-config/scripts/pkgconfig.csh --rwxr-xr-x 1 root root 204 2007-05-24 05:41 ./source/d/pkg-config/scripts/pkgconfig.sh --rw-r--r-- 1 root root 907 2008-02-11 03:44 ./source/d/pkg-config/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/pmake --rw-r--r-- 1 root root 264383 2005-07-07 09:32 ./source/d/pmake/pmake-1.111.tar.gz --rwxr-xr-x 1 root root 3801 2009-05-19 20:05 ./source/d/pmake/pmake.SlackBuild --rw-r--r-- 1 root root 265 2007-03-24 23:38 ./source/d/pmake/pmake.strerror.strdup.diff.gz --rw-r--r-- 1 root root 38071 2007-02-09 20:45 ./source/d/pmake/pmake.txt.gz --rw-r--r-- 1 root root 26675 2005-07-07 09:32 ./source/d/pmake/pmake_1.111-1.diff.gz --rw-r--r-- 1 root root 795 2007-02-09 21:04 ./source/d/pmake/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 19:23 ./source/d/python --rw-r--r-- 1 root root 9415824 2009-04-15 00:05 ./source/d/python/Python-2.6.2.tar.xz --rw-r--r-- 1 root root 1240232 2009-04-29 05:44 ./source/d/python/python-2.6.2-docs-text.tar.xz --rwxr-xr-x 1 root root 4399 2009-08-14 19:19 ./source/d/python/python.SlackBuild --rw-r--r-- 1 root root 477 2009-04-29 20:18 ./source/d/python/python.pure64.diff.gz --rw-r--r-- 1 root root 325 2009-06-09 19:23 ./source/d/python/python.readline.set_pre_input_hook.diff.gz --rw-r--r-- 1 root root 2164 2009-04-29 20:12 ./source/d/python/python.x86_64.diff.gz --rw-r--r-- 1 root root 895 2002-03-23 22:54 ./source/d/python/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/rcs --rw-r--r-- 1 root root 10982 2007-06-27 22:53 ./source/d/rcs/_rcs.tar.gz --rw-r--r-- 1 root root 270 1995-08-12 19:26 ./source/d/rcs/rcs-5.7.diff.gz --rw-r--r-- 1 root root 282413 1995-06-16 14:53 ./source/d/rcs/rcs-5.7.tar.gz --rwxr-xr-x 1 root root 2738 2009-05-19 20:05 ./source/d/rcs/rcs.SlackBuild --rw-r--r-- 1 root root 776 2002-03-23 22:58 ./source/d/rcs/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-19 20:23 ./source/d/ruby --rw-r--r-- 1 root root 3554372 2009-06-15 23:58 ./source/d/ruby/ruby-1.8.7-p174.tar.xz --rwxr-xr-x 1 root root 3167 2009-06-19 20:24 ./source/d/ruby/ruby.SlackBuild --rw-r--r-- 1 root root 372 2009-04-29 18:35 ./source/d/ruby/ruby.x86_64.diff.gz --rw-r--r-- 1 root root 865 2006-07-20 06:49 ./source/d/ruby/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/strace --rw-r--r-- 1 root root 1007 2002-04-06 20:28 ./source/d/strace/slack-desc --rw-r--r-- 1 root root 480973 2008-08-29 00:40 ./source/d/strace/strace-4.5.18.tar.bz2 --rwxr-xr-x 1 root root 2446 2009-05-19 20:05 ./source/d/strace/strace.SlackBuild -drwxr-xr-x 2 root root 4096 2009-08-07 01:30 ./source/d/subversion --rwxr-xr-x 1 root root 185 2009-05-30 01:45 ./source/d/subversion/get-svn-book.sh --rw-r--r-- 1 root root 1058 2009-05-30 01:45 ./source/d/subversion/slack-desc --rw-r--r-- 1 root root 4444148 2009-08-06 20:56 ./source/d/subversion/subversion-1.6.4.tar.xz --rwxr-xr-x 1 root root 4973 2009-08-07 02:09 ./source/d/subversion/subversion.SlackBuild --rw-r--r-- 1 root root 414263 2009-08-06 06:02 ./source/d/subversion/svn-book-html.tar.bz2 -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/swig --rw-r--r-- 1 root root 1018 2009-03-08 02:10 ./source/d/swig/slack-desc --rw-r--r-- 1 root root 3888548 2009-01-31 23:59 ./source/d/swig/swig-1.3.38.tar.bz2 --rwxr-xr-x 1 root root 3231 2009-05-19 20:05 ./source/d/swig/swig.SlackBuild --rw-r--r-- 1 root root 61 2009-02-23 00:35 ./source/d/swig/swig.url -drwxr-xr-x 3 root root 4096 2008-11-05 12:24 ./source/e -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/e/emacs --rw-r--r-- 1 root root 478 2008-04-06 03:10 ./source/e/emacs/doinst.sh --rw-r--r-- 1 root root 31856408 2008-09-05 16:34 ./source/e/emacs/emacs-22.3.tar.bz2 --rwxr-xr-x 1 root root 4981 2009-05-23 00:41 ./source/e/emacs/emacs.SlackBuild --rw-r--r-- 1 root root 267 2008-04-06 03:18 ./source/e/emacs/emacs.info --rw-r--r-- 1 root root 549 2008-04-06 03:11 ./source/e/emacs/slack-desc -drwxr-xr-x 2 root root 4096 2009-03-16 21:18 ./source/f --rw-r--r-- 1 root root 963 2002-02-25 21:44 ./source/f/slack-desc.linux-faqs --rw-r--r-- 1 root root 804 2002-02-25 21:55 ./source/f/slack-desc.linux-howtos -drwxr-xr-x 3 root root 4096 2009-06-01 17:18 ./source/installer --rw-r--r-- 1 root root 2022321 2008-09-28 18:08 ./source/installer/busybox-1.12.1.tar.bz2 --rw-r--r-- 1 root root 218 2008-11-07 01:40 ./source/installer/busybox-1.12.1_inotify.diff.gz --rw-r--r-- 1 root root 22377 2009-05-06 22:27 ./source/installer/busybox-dot-config --rwxr-xr-x 1 root root 2067 2009-06-01 17:18 ./source/installer/busybox.SlackBuild -drwxr-xr-x 2 root root 4096 2008-03-13 13:43 ./source/installer/dropbear --rw-r--r-- 1 root root 372 2008-03-13 13:43 ./source/installer/dropbear/doinst.sh --rw-r--r-- 1 root root 1589729 2008-03-13 13:43 ./source/installer/dropbear/dropbear-0.50.tar.bz2 --rwxr-xr-- 1 root root 4332 2008-03-13 13:43 ./source/installer/dropbear/dropbear.Slackbuild --rw-r--r-- 1 root root 414 2008-03-13 13:43 ./source/installer/dropbear/dropbear.xauth.patch --rw-r--r-- 1 root root 582 2008-03-13 13:43 ./source/installer/dropbear/dropbear_dbclientpath.patch --rw-r--r-- 1 root root 1887 2008-03-13 13:43 ./source/installer/dropbear/dropbear_emptypass.patch --rw-r--r-- 1 root root 1795 2008-03-13 13:43 ./source/installer/dropbear/rc.dropbear.new --rw-r--r-- 1 root root 890 2008-03-13 13:43 ./source/installer/dropbear/slack-desc -drwxr-xr-x 6 root root 4096 2009-08-18 22:38 ./source/k --rw-r--r-- 1 root root 788 2009-07-14 19:15 ./source/k/2.6.29.x-intel-crash-patch.diff.gz --rw-r--r-- 1 root root 1208 2009-07-15 22:54 ./source/k/README.TXT --rw-r--r-- 1 root root 292 2009-08-18 21:57 ./source/k/README_SECURITY.TXT --rw-r--r-- 1 root root 2586 2009-07-15 22:54 ./source/k/README_SPEAKUP_PATCH.TXT --rw-r--r-- 1 root root 90657 2009-08-17 07:22 ./source/k/config-generic-2.6.29.6 --rw-r--r-- 1 root root 90685 2009-08-17 16:55 ./source/k/config-huge-2.6.29.6 --rw-r--r-- 1 root root 91169 2009-08-17 17:03 ./source/k/config-speakup-2.6.29.6 -drwxr-xr-x 2 root root 4096 2009-08-17 07:48 ./source/k/kernel-firmware --rwxr-xr-x 1 root root 1679 2009-08-17 07:48 ./source/k/kernel-firmware/kernel-firmware.SlackBuild --rw-r--r-- 1 root root 344 2008-10-16 03:59 ./source/k/kernel-firmware/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-17 07:48 ./source/k/kernel-generic --rwxr-xr-x 1 root root 2909 2009-08-17 07:48 ./source/k/kernel-generic/kernel-generic.SlackBuild --rw-r--r-- 1 root root 1091 2009-06-18 17:37 ./source/k/kernel-generic/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-17 16:59 ./source/k/kernel-huge --rwxr-xr-x 1 root root 2906 2009-08-17 16:59 ./source/k/kernel-huge/kernel-huge.SlackBuild --rw-r--r-- 1 root root 1100 2009-06-18 17:36 ./source/k/kernel-huge/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-17 07:48 ./source/k/kernel-modules --rwxr-xr-x 1 root root 2872 2009-08-17 07:48 ./source/k/kernel-modules/kernel-modules.SlackBuild --rwxr-xr-x 1 root root 35406 2009-06-04 22:36 ./source/k/kernel-modules/rc.modules.new --rw-r--r-- 1 root root 985 2009-06-18 17:37 ./source/k/kernel-modules/slack-desc --rw-r--r-- 1 root root 248 2009-08-17 01:17 ./source/k/linux-2.6.29.6-01-sendpage.diff.gz --rw-r--r-- 1 root root 293 2009-08-17 02:04 ./source/k/linux-2.6.29.6-02-default-mmap_min_addr-4096.diff.gz --rw-r--r-- 1 root root 248 2009-07-02 23:43 ./source/k/linux-2.6.29.6.tar.sign --rw-r--r-- 1 root root 46465516 2009-07-02 23:43 ./source/k/linux-2.6.29.6.tar.xz --rw-r--r-- 1 root root 262123 2009-02-26 23:24 ./source/k/speakup-2009-02-24.tar.bz2 -drwxr-xr-x 34 root root 4096 2009-08-07 22:41 ./source/kde --rwxr-xr-x 1 root root 1859 2009-05-19 20:05 ./source/kde/KDE.SlackBuild --rw-r--r-- 1 root root 1027 2009-06-03 07:54 ./source/kde/KDE.options -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/amarok --rwxr-xr-x 1 root root 4691 2009-07-30 19:48 ./source/kde/amarok/amarok.SlackBuild --rw-r--r-- 1 root root 452 2009-06-05 10:59 ./source/kde/amarok/amarok.qtscript.optional.diff.gz --rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/amarok/doinst.sh.gz --rw-r--r-- 1 root root 23 2009-06-29 00:35 ./source/kde/amarok/local.options --rw-r--r-- 1 root root 779 2008-05-26 06:10 ./source/kde/amarok/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/guidance-power-manager --rwxr-xr-x 1 root root 2775 2009-05-19 20:05 ./source/kde/guidance-power-manager/guidance-power-manager.SlackBuild --rw-r--r-- 1 root root 947 2008-08-01 06:02 ./source/kde/guidance-power-manager/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/k3b --rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/k3b/doinst.sh.gz --rwxr-xr-x 1 root root 2914 2009-05-19 20:05 ./source/kde/k3b/k3b.SlackBuild --rw-r--r-- 1 root root 311591 2009-04-03 19:16 ./source/kde/k3b/k3b.internal.libsamplerate.diff.gz --rw-r--r-- 1 root root 15 2009-06-03 09:43 ./source/kde/k3b/local.options --rw-r--r-- 1 root root 836 2004-06-15 19:08 ./source/kde/k3b/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kaudiocreator --rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/kaudiocreator/doinst.sh.gz --rwxr-xr-x 1 root root 2785 2009-05-19 20:05 ./source/kde/kaudiocreator/kaudiocreator.SlackBuild --rw-r--r-- 1 root root 17 2009-08-07 23:21 ./source/kde/kaudiocreator/local.options --rw-r--r-- 1 root root 752 2008-08-01 06:02 ./source/kde/kaudiocreator/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdeaccessibility --rw-r--r-- 1 root root 118 2007-12-21 07:15 ./source/kde/kdeaccessibility/doinst.sh.gz --rwxr-xr-x 1 root root 2915 2009-05-19 20:05 ./source/kde/kdeaccessibility/kdeaccessibility.SlackBuild --rw-r--r-- 1 root root 848 2004-02-02 21:16 ./source/kde/kdeaccessibility/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdeadmin --rw-r--r-- 1 root root 118 2007-12-21 07:36 ./source/kde/kdeadmin/doinst.sh.gz --rwxr-xr-x 1 root root 2874 2009-05-19 20:05 ./source/kde/kdeadmin/kdeadmin.SlackBuild --rw-r--r-- 1 root root 609 2007-12-21 07:36 ./source/kde/kdeadmin/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdeartwork --rw-r--r-- 1 root root 118 2007-12-21 07:45 ./source/kde/kdeartwork/doinst.sh.gz --rwxr-xr-x 1 root root 2880 2009-05-19 20:05 ./source/kde/kdeartwork/kdeartwork.SlackBuild --rw-r--r-- 1 root root 671 2007-12-21 07:46 ./source/kde/kdeartwork/slack-desc -drwxr-xr-x 4 root root 4096 2009-06-06 01:24 ./source/kde/kdebase -drwxr-xr-x 2 root root 4096 2009-08-05 19:04 ./source/kde/kdebase-runtime --rw-r--r-- 1 root root 118 2007-12-21 04:58 ./source/kde/kdebase-runtime/doinst.sh.gz --rw-r--r-- 1 root root 404 2009-08-05 18:57 ./source/kde/kdebase-runtime/kdebase-runtime-text-render-969192.diff.gz --rwxr-xr-x 1 root root 3206 2009-08-05 19:04 ./source/kde/kdebase-runtime/kdebase-runtime.SlackBuild --rw-r--r-- 1 root root 8 2009-08-05 19:04 ./source/kde/kdebase-runtime/local.options --rw-r--r-- 1 root root 739 2008-08-01 06:03 ./source/kde/kdebase-runtime/slack-desc -drwxr-xr-x 4 root root 4096 2009-06-06 01:24 ./source/kde/kdebase-workspace -drwxr-xr-x 2 root root 4096 2007-12-21 06:08 ./source/kde/kdebase-workspace/config --rw-r--r-- 1 root root 2551 2007-12-21 05:56 ./source/kde/kdebase-workspace/config/Xsession --rw-r--r-- 1 root root 1844 2007-12-21 05:53 ./source/kde/kdebase-workspace/config/Xsession.orig --rw-r--r-- 1 root root 361 2007-12-21 06:10 ./source/kde/kdebase-workspace/doinst.sh.gz --rwxr-xr-x 1 root root 3966 2009-05-19 20:05 ./source/kde/kdebase-workspace/kdebase-workspace.SlackBuild --rw-r--r-- 1 root root 456 2008-08-01 06:04 ./source/kde/kdebase-workspace/slack-desc -drwxr-xr-x 2 root root 4096 2001-02-06 04:04 ./source/kde/kdebase-workspace/xinit --rwxr-xr-x 1 root root 516 2007-02-15 09:18 ./source/kde/kdebase-workspace/xinit/xinitrc.kde -drwxr-xr-x 2 root root 4096 2008-09-16 01:19 ./source/kde/kdebase/config --rw-r--r-- 1 root root 69 2006-08-23 21:34 ./source/kde/kdebase/config/kdeglobals --rw-r--r-- 1 root root 124 2009-01-21 23:18 ./source/kde/kdebase/doinst.sh.gz --rwxr-xr-x 1 root root 3769 2009-05-19 20:05 ./source/kde/kdebase/kdebase.SlackBuild -drwxr-xr-x 2 root root 4096 2001-02-06 04:04 ./source/kde/kdebase/profile.d --rwxr-xr-x 1 root root 274 2008-07-11 02:34 ./source/kde/kdebase/profile.d/kde.csh --rwxr-xr-x 1 root root 261 2008-07-11 02:33 ./source/kde/kdebase/profile.d/kde.sh --rw-r--r-- 1 root root 748 2008-08-01 06:04 ./source/kde/kdebase/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdebindings --rwxr-xr-x 1 root root 3296 2009-05-19 20:05 ./source/kde/kdebindings/kdebindings.SlackBuild --rw-r--r-- 1 root root 881 2008-08-01 06:06 ./source/kde/kdebindings/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdeedu --rw-r--r-- 1 root root 118 2007-12-21 12:20 ./source/kde/kdeedu/doinst.sh.gz --rwxr-xr-x 1 root root 2860 2009-05-19 20:05 ./source/kde/kdeedu/kdeedu.SlackBuild --rw-r--r-- 1 root root 586 2002-03-27 03:31 ./source/kde/kdeedu/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdegames --rw-r--r-- 1 root root 118 2007-12-21 12:16 ./source/kde/kdegames/doinst.sh.gz --rwxr-xr-x 1 root root 2874 2009-05-19 20:05 ./source/kde/kdegames/kdegames.SlackBuild --rw-r--r-- 1 root root 631 2006-07-24 07:01 ./source/kde/kdegames/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdegraphics --rw-r--r-- 1 root root 118 2007-12-21 13:11 ./source/kde/kdegraphics/doinst.sh.gz --rwxr-xr-x 1 root root 2908 2009-05-19 20:05 ./source/kde/kdegraphics/kdegraphics.SlackBuild --rw-r--r-- 1 root root 782 2008-08-01 06:09 ./source/kde/kdegraphics/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-07 22:17 ./source/kde/kdelibs --rw-r--r-- 1 root root 142 2007-12-20 04:10 ./source/kde/kdelibs/doinst.sh.gz --rw-r--r-- 1 root root 749 2009-06-12 19:53 ./source/kde/kdelibs/fixPopupForPlasmaboard.diff.gz --rwxr-xr-x 1 root root 3126 2009-08-07 22:17 ./source/kde/kdelibs/kdelibs.SlackBuild --rw-r--r-- 1 root root 1064 2009-08-06 07:20 ./source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch.gz --rw-r--r-- 1 root root 8 2009-08-07 22:17 ./source/kde/kdelibs/local.options --rw-r--r-- 1 root root 635 2006-07-24 06:55 ./source/kde/kdelibs/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdemultimedia --rw-r--r-- 1 root root 118 2007-12-21 07:19 ./source/kde/kdemultimedia/doinst.sh.gz --rwxr-xr-x 1 root root 2917 2009-05-19 20:05 ./source/kde/kdemultimedia/kdemultimedia.SlackBuild --rw-r--r-- 1 root root 921 2008-08-01 06:10 ./source/kde/kdemultimedia/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-29 19:34 ./source/kde/kdenetwork --rw-r--r-- 1 root root 118 2007-12-21 07:33 ./source/kde/kdenetwork/doinst.sh.gz --rwxr-xr-x 1 root root 2955 2009-06-29 19:18 ./source/kde/kdenetwork/kdenetwork.SlackBuild --rw-r--r-- 1 root root 3565 2009-06-29 19:16 ./source/kde/kdenetwork/kopete-r986796.diff.gz --rw-r--r-- 1 root root 8 2009-06-29 19:18 ./source/kde/kdenetwork/local.options --rw-r--r-- 1 root root 689 2003-09-14 13:23 ./source/kde/kdenetwork/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdepim --rw-r--r-- 1 root root 118 2007-12-21 13:41 ./source/kde/kdepim/doinst.sh.gz --rwxr-xr-x 1 root root 2866 2009-05-19 20:05 ./source/kde/kdepim/kdepim.SlackBuild --rw-r--r-- 1 root root 822 2007-12-21 15:19 ./source/kde/kdepim/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdepimlibs --rwxr-xr-x 1 root root 2877 2009-05-19 20:05 ./source/kde/kdepimlibs/kdepimlibs.SlackBuild --rw-r--r-- 1 root root 711 2008-08-01 06:11 ./source/kde/kdepimlibs/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdeplasma-addons --rw-r--r-- 1 root root 118 2007-12-21 12:17 ./source/kde/kdeplasma-addons/doinst.sh.gz --rwxr-xr-x 1 root root 2915 2009-05-19 20:05 ./source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild --rw-r--r-- 1 root root 765 2008-08-01 06:15 ./source/kde/kdeplasma-addons/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdesdk --rw-r--r-- 1 root root 118 2007-12-21 13:10 ./source/kde/kdesdk/doinst.sh.gz --rwxr-xr-x 1 root root 2852 2009-05-19 20:05 ./source/kde/kdesdk/kdesdk.SlackBuild --rw-r--r-- 1 root root 751 2007-12-21 14:37 ./source/kde/kdesdk/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdetoys --rw-r--r-- 1 root root 118 2007-12-21 12:17 ./source/kde/kdetoys/doinst.sh.gz --rwxr-xr-x 1 root root 2867 2009-05-19 20:05 ./source/kde/kdetoys/kdetoys.SlackBuild --rw-r--r-- 1 root root 674 2008-08-01 06:17 ./source/kde/kdetoys/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdeutils --rw-r--r-- 1 root root 118 2007-12-21 07:16 ./source/kde/kdeutils/doinst.sh.gz --rwxr-xr-x 1 root root 2883 2009-05-19 20:05 ./source/kde/kdeutils/kdeutils.SlackBuild --rw-r--r-- 1 root root 753 2008-08-01 06:20 ./source/kde/kdeutils/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdevelop --rw-r--r-- 1 root root 118 2007-12-24 16:27 ./source/kde/kdevelop/doinst.sh.gz --rwxr-xr-x 1 root root 2912 2009-05-19 20:05 ./source/kde/kdevelop/kdevelop.SlackBuild --rw-r--r-- 1 root root 15 2009-02-07 13:45 ./source/kde/kdevelop/local.options --rw-r--r-- 1 root root 675 2008-02-11 03:44 ./source/kde/kdevelop/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/kdevplatform --rw-r--r-- 1 root root 118 2007-12-24 16:27 ./source/kde/kdevplatform/doinst.sh.gz --rwxr-xr-x 1 root root 2922 2009-05-19 20:05 ./source/kde/kdevplatform/kdevplatform.SlackBuild --rw-r--r-- 1 root root 15 2009-02-07 13:44 ./source/kde/kdevplatform/local.options --rw-r--r-- 1 root root 710 2009-01-13 15:04 ./source/kde/kdevplatform/slack-desc -drwxr-xr-x 3 root root 4096 2009-06-06 01:24 ./source/kde/kdewebdev --rw-r--r-- 1 root root 118 2007-12-21 15:17 ./source/kde/kdewebdev/doinst.sh.gz --rw-r--r-- 1 root root 391 2008-12-29 21:48 ./source/kde/kdewebdev/kde4-kdewebdev-findtidy.diff.gz --rwxr-xr-x 1 root root 3286 2009-05-19 20:05 ./source/kde/kdewebdev/kdewebdev.SlackBuild --rw-r--r-- 1 root root 747 2007-12-21 13:38 ./source/kde/kdewebdev/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 02:12 ./source/kde/kdewebdev/tidy --rwxr-xr-x 1 root root 1682 2009-05-07 03:57 ./source/kde/kdewebdev/tidy/get-tidy-cvs.sh --rw-r--r-- 1 root root 338376 2009-06-05 04:03 ./source/kde/kdewebdev/tidy/tidy-20090604T2303.tar.xz --rwxr-xr-x 1 root root 2973 2009-06-06 02:12 ./source/kde/kdewebdev/tidy/tidy.SlackBuild --rwxr-xr-x 1 root root 2591 2009-06-06 02:12 ./source/kde/kdewebdev/tidy/tidy.build -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/koffice --rw-r--r-- 1 root root 118 2007-12-24 16:27 ./source/kde/koffice/doinst.sh.gz --rwxr-xr-x 1 root root 2868 2009-05-19 20:05 ./source/kde/koffice/koffice.SlackBuild --rw-r--r-- 1 root root 14 2009-08-12 20:53 ./source/kde/koffice/local.options --rw-r--r-- 1 root root 951 2007-12-24 16:26 ./source/kde/koffice/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/konq-plugins --rwxr-xr-x 1 root root 2880 2009-05-19 20:05 ./source/kde/konq-plugins/konq-plugins.SlackBuild --rw-r--r-- 1 root root 982 2008-11-24 21:25 ./source/kde/konq-plugins/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/ktorrent --rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/ktorrent/doinst.sh.gz --rwxr-xr-x 1 root root 2876 2009-05-19 20:05 ./source/kde/ktorrent/ktorrent.SlackBuild --rw-r--r-- 1 root root 14 2009-06-03 09:48 ./source/kde/ktorrent/local.options --rw-r--r-- 1 root root 1053 2006-08-30 03:35 ./source/kde/ktorrent/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/mplayerthumbs --rw-r--r-- 1 root root 20492 2009-03-20 12:49 ./source/kde/mplayerthumbs/mplayerthumbs-1.2.tar.gz --rwxr-xr-x 1 root root 3571 2009-05-23 00:41 ./source/kde/mplayerthumbs/mplayerthumbs.SlackBuild --rw-r--r-- 1 root root 877 2009-03-20 21:14 ./source/kde/mplayerthumbs/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/kde/skanlite --rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/skanlite/doinst.sh.gz --rw-r--r-- 1 root root 21 2009-06-03 07:29 ./source/kde/skanlite/local.options --rwxr-xr-x 1 root root 2843 2009-05-19 20:05 ./source/kde/skanlite/skanlite.SlackBuild --rw-r--r-- 1 root root 666 2009-01-14 00:18 ./source/kde/skanlite/slack-desc -drwxr-xr-x 3 root root 4096 2009-08-12 20:55 ./source/kde/src -drwxr-xr-x 2 root root 4096 2009-08-07 23:21 ./source/kde/src/extragear --rw-r--r-- 1 root root 3914560 2009-06-12 16:08 ./source/kde/src/extragear/amarok-2.1.1.tar.xz --rw-r--r-- 1 root root 75076 2009-06-02 21:18 ./source/kde/src/extragear/guidance-power-manager-4.2.4.tar.xz --rw-r--r-- 1 root root 3405904 2009-04-03 06:18 ./source/kde/src/extragear/k3b-r948463.tar.xz --rw-r--r-- 1 root root 56272 2009-08-07 23:20 ./source/kde/src/extragear/kaudiocreator-r1008583.tar.xz --rw-r--r-- 1 root root 817500 2009-06-02 21:19 ./source/kde/src/extragear/konq-plugins-4.2.4.tar.xz --rw-r--r-- 1 root root 1864716 2009-06-01 17:06 ./source/kde/src/extragear/ktorrent-3.2.2.tar.xz --rw-r--r-- 1 root root 1152100 2009-06-02 21:20 ./source/kde/src/extragear/skanlite-0.3-kde4.2.4.tar.xz --rw-r--r-- 1 root root 5292216 2009-05-28 20:49 ./source/kde/src/kdeaccessibility-4.2.4.tar.xz --rw-r--r-- 1 root root 1704248 2009-05-28 20:49 ./source/kde/src/kdeadmin-4.2.4.tar.xz --rw-r--r-- 1 root root 20787568 2009-05-28 20:49 ./source/kde/src/kdeartwork-4.2.4.tar.xz --rw-r--r-- 1 root root 3881684 2009-05-28 20:49 ./source/kde/src/kdebase-4.2.4.tar.xz --rw-r--r-- 1 root root 57911848 2009-05-28 20:49 ./source/kde/src/kdebase-runtime-4.2.4.tar.xz --rw-r--r-- 1 root root 49513980 2009-05-28 20:49 ./source/kde/src/kdebase-workspace-4.2.4.tar.xz --rw-r--r-- 1 root root 3965692 2009-05-28 20:50 ./source/kde/src/kdebindings-4.2.4.tar.xz --rw-r--r-- 1 root root 52980056 2009-05-28 20:50 ./source/kde/src/kdeedu-4.2.4.tar.xz --rw-r--r-- 1 root root 33984356 2009-05-28 20:49 ./source/kde/src/kdegames-4.2.4.tar.xz --rw-r--r-- 1 root root 3311800 2009-05-28 20:50 ./source/kde/src/kdegraphics-4.2.4.tar.xz --rw-r--r-- 1 root root 8392792 2009-05-31 15:41 ./source/kde/src/kdelibs-4.2.4.tar.xz --rw-r--r-- 1 root root 1413780 2009-05-28 20:50 ./source/kde/src/kdemultimedia-4.2.4.tar.xz --rw-r--r-- 1 root root 6151504 2009-05-31 15:41 ./source/kde/src/kdenetwork-4.2.4.tar.xz --rw-r--r-- 1 root root 10864672 2009-05-29 12:19 ./source/kde/src/kdepim-4.2.4.tar.xz --rw-r--r-- 1 root root 1341996 2009-05-28 20:49 ./source/kde/src/kdepimlibs-4.2.4.tar.xz --rw-r--r-- 1 root root 4114396 2009-05-28 20:50 ./source/kde/src/kdeplasma-addons-4.2.4.tar.xz --rw-r--r-- 1 root root 4732836 2009-05-28 20:50 ./source/kde/src/kdesdk-4.2.4.tar.xz --rw-r--r-- 1 root root 1144236 2009-05-28 20:49 ./source/kde/src/kdetoys-4.2.4.tar.xz --rw-r--r-- 1 root root 2192328 2009-05-28 20:49 ./source/kde/src/kdeutils-4.2.4.tar.xz --rw-r--r-- 1 root root 2481808 2009-02-07 13:43 ./source/kde/src/kdevelop-3.9.91.tar.xz --rw-r--r-- 1 root root 752324 2009-02-07 13:43 ./source/kde/src/kdevplatform-0.9.91.tar.xz --rw-r--r-- 1 root root 2364684 2009-05-28 20:49 ./source/kde/src/kdewebdev-4.2.4.tar.xz --rw-r--r-- 1 root root 77165068 2009-08-06 19:15 ./source/kde/src/koffice-2.0.2.tar.xz -drwxr-xr-x 5 root root 4096 2009-06-05 22:52 ./source/kdei --rw-r--r-- 1 root root 3047691 2009-05-28 21:39 ./source/kdei/kde-l10n-ar-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1648875 2009-05-28 21:40 ./source/kdei/kde-l10n-bg-4.2.4.tar.bz2 --rw-r--r-- 1 root root 298627 2009-05-28 21:39 ./source/kdei/kde-l10n-bn_IN-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3803446 2009-05-28 21:40 ./source/kdei/kde-l10n-ca-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3099171 2009-05-28 21:39 ./source/kdei/kde-l10n-cs-4.2.4.tar.bz2 --rw-r--r-- 1 root root 407541 2009-05-28 21:40 ./source/kdei/kde-l10n-csb-4.2.4.tar.bz2 --rw-r--r-- 1 root root 17846324 2009-05-28 21:39 ./source/kdei/kde-l10n-da-4.2.4.tar.bz2 --rw-r--r-- 1 root root 18456609 2009-05-28 21:40 ./source/kdei/kde-l10n-de-4.2.4.tar.bz2 --rw-r--r-- 1 root root 2137632 2009-05-28 21:39 ./source/kdei/kde-l10n-el-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3709411 2009-05-28 21:39 ./source/kdei/kde-l10n-en_GB-4.2.4.tar.bz2 --rw-r--r-- 1 root root 18086558 2009-05-28 21:40 ./source/kdei/kde-l10n-es-4.2.4.tar.bz2 --rw-r--r-- 1 root root 8530370 2009-05-28 21:39 ./source/kdei/kde-l10n-et-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1919053 2009-05-28 21:39 ./source/kdei/kde-l10n-eu-4.2.4.tar.bz2 --rw-r--r-- 1 root root 2015413 2009-05-28 21:39 ./source/kdei/kde-l10n-fi-4.2.4.tar.bz2 --rw-r--r-- 1 root root 21447207 2009-05-28 21:39 ./source/kdei/kde-l10n-fr-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1885743 2009-05-28 21:39 ./source/kdei/kde-l10n-ga-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3459538 2009-05-28 21:39 ./source/kdei/kde-l10n-gl-4.2.4.tar.bz2 --rw-r--r-- 1 root root 552252 2009-05-28 21:39 ./source/kdei/kde-l10n-gu-4.2.4.tar.bz2 --rw-r--r-- 1 root root 2023647 2009-05-28 21:39 ./source/kdei/kde-l10n-he-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1632630 2009-05-28 21:39 ./source/kdei/kde-l10n-hi-4.2.4.tar.bz2 --rw-r--r-- 1 root root 4178697 2009-05-28 21:40 ./source/kdei/kde-l10n-hu-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1631051 2009-05-28 21:40 ./source/kdei/kde-l10n-is-4.2.4.tar.bz2 --rw-r--r-- 1 root root 10820811 2009-05-28 21:39 ./source/kdei/kde-l10n-it-4.2.4.tar.bz2 --rw-r--r-- 1 root root 2438865 2009-05-28 21:39 ./source/kdei/kde-l10n-ja-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1208684 2009-05-28 21:40 ./source/kdei/kde-l10n-kk-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1821029 2009-05-28 21:40 ./source/kdei/kde-l10n-km-4.2.4.tar.bz2 --rw-r--r-- 1 root root 317775 2009-05-28 21:39 ./source/kdei/kde-l10n-kn-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1264073 2009-05-28 21:39 ./source/kdei/kde-l10n-ko-4.2.4.tar.bz2 --rw-r--r-- 1 root root 612206 2009-05-28 21:39 ./source/kdei/kde-l10n-ku-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1887943 2009-05-28 21:40 ./source/kdei/kde-l10n-lt-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1529255 2009-05-28 21:40 ./source/kdei/kde-l10n-lv-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1358375 2009-05-28 21:40 ./source/kdei/kde-l10n-mai-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1672657 2009-05-28 21:39 ./source/kdei/kde-l10n-mk-4.2.4.tar.bz2 --rw-r--r-- 1 root root 20144243 2009-05-28 21:40 ./source/kdei/kde-l10n-ml-4.2.4.tar.bz2 --rw-r--r-- 1 root root 283455 2009-05-28 21:39 ./source/kdei/kde-l10n-mr-4.2.4.tar.bz2 --rw-r--r-- 1 root root 2366916 2009-05-28 21:39 ./source/kdei/kde-l10n-nb-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3389897 2009-05-28 21:40 ./source/kdei/kde-l10n-nds-4.2.4.tar.bz2 --rw-r--r-- 1 root root 12591866 2009-05-28 21:39 ./source/kdei/kde-l10n-nl-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1997128 2009-05-28 21:39 ./source/kdei/kde-l10n-nn-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1453172 2009-05-28 21:40 ./source/kdei/kde-l10n-pa-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3247123 2009-05-28 21:39 ./source/kdei/kde-l10n-pl-4.2.4.tar.bz2 --rw-r--r-- 1 root root 6319138 2009-05-28 21:39 ./source/kdei/kde-l10n-pt-4.2.4.tar.bz2 --rw-r--r-- 1 root root 11571252 2009-05-28 21:39 ./source/kdei/kde-l10n-pt_BR-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3086549 2009-05-28 21:39 ./source/kdei/kde-l10n-ro-4.2.4.tar.bz2 --rw-r--r-- 1 root root 5497566 2009-05-28 21:40 ./source/kdei/kde-l10n-ru-4.2.4.tar.bz2 --rw-r--r-- 1 root root 2095473 2009-05-28 21:40 ./source/kdei/kde-l10n-sk-4.2.4.tar.bz2 --rw-r--r-- 1 root root 4171478 2009-05-28 21:39 ./source/kdei/kde-l10n-sl-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3704778 2009-05-28 21:40 ./source/kdei/kde-l10n-sr-4.2.4.tar.bz2 --rw-r--r-- 1 root root 21055599 2009-05-28 21:39 ./source/kdei/kde-l10n-sv-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1849772 2009-05-28 21:40 ./source/kdei/kde-l10n-tg-4.2.4.tar.bz2 --rw-r--r-- 1 root root 1121341 2009-05-28 21:39 ./source/kdei/kde-l10n-th-4.2.4.tar.bz2 --rw-r--r-- 1 root root 2014892 2009-05-28 21:40 ./source/kdei/kde-l10n-tr-4.2.4.tar.bz2 --rw-r--r-- 1 root root 7868780 2009-05-28 21:40 ./source/kdei/kde-l10n-uk-4.2.4.tar.bz2 --rw-r--r-- 1 root root 813463 2009-05-28 21:40 ./source/kdei/kde-l10n-wa-4.2.4.tar.bz2 --rw-r--r-- 1 root root 3150800 2009-05-28 21:39 ./source/kdei/kde-l10n-zh_CN-4.2.4.tar.bz2 --rw-r--r-- 1 root root 2086297 2009-05-28 21:39 ./source/kdei/kde-l10n-zh_TW-4.2.4.tar.bz2 --rwxr-xr-x 1 root root 3985 2009-06-05 18:51 ./source/kdei/kde-l10n.SlackBuild -drwxr-xr-x 3 root root 4096 2009-08-12 22:28 ./source/kdei/koffice --rw-r--r-- 1 root root 854883 2009-08-06 19:16 ./source/kdei/koffice/koffice-l10n-ca-2.0.2.tar.bz2 --rw-r--r-- 1 root root 254180 2009-08-06 19:20 ./source/kdei/koffice/koffice-l10n-cs-2.0.2.tar.bz2 --rw-r--r-- 1 root root 906844 2009-08-06 19:21 ./source/kdei/koffice/koffice-l10n-da-2.0.2.tar.bz2 --rw-r--r-- 1 root root 5148595 2009-08-06 19:19 ./source/kdei/koffice/koffice-l10n-de-2.0.2.tar.bz2 --rw-r--r-- 1 root root 261106 2009-08-06 19:17 ./source/kdei/koffice/koffice-l10n-el-2.0.2.tar.bz2 --rw-r--r-- 1 root root 280251 2009-08-06 19:19 ./source/kdei/koffice/koffice-l10n-en_GB-2.0.2.tar.bz2 --rw-r--r-- 1 root root 5663403 2009-08-06 19:17 ./source/kdei/koffice/koffice-l10n-es-2.0.2.tar.bz2 --rw-r--r-- 1 root root 922171 2009-08-06 19:18 ./source/kdei/koffice/koffice-l10n-et-2.0.2.tar.bz2 --rw-r--r-- 1 root root 6205784 2009-08-06 19:21 ./source/kdei/koffice/koffice-l10n-fr-2.0.2.tar.bz2 --rw-r--r-- 1 root root 263453 2009-08-06 19:15 ./source/kdei/koffice/koffice-l10n-fy-2.0.2.tar.bz2 --rw-r--r-- 1 root root 297305 2009-08-06 19:21 ./source/kdei/koffice/koffice-l10n-gl-2.0.2.tar.bz2 --rw-r--r-- 1 root root 224589 2009-08-06 19:16 ./source/kdei/koffice/koffice-l10n-hi-2.0.2.tar.bz2 --rw-r--r-- 1 root root 903186 2009-08-06 19:18 ./source/kdei/koffice/koffice-l10n-it-2.0.2.tar.bz2 --rw-r--r-- 1 root root 225427 2009-08-06 19:17 ./source/kdei/koffice/koffice-l10n-ja-2.0.2.tar.bz2 --rw-r--r-- 1 root root 247510 2009-08-06 19:20 ./source/kdei/koffice/koffice-l10n-kk-2.0.2.tar.bz2 --rw-r--r-- 1 root root 273104 2009-08-06 19:19 ./source/kdei/koffice/koffice-l10n-nb-2.0.2.tar.bz2 --rw-r--r-- 1 root root 872871 2009-08-06 19:16 ./source/kdei/koffice/koffice-l10n-nds-2.0.2.tar.bz2 --rw-r--r-- 1 root root 2732895 2009-08-06 19:16 ./source/kdei/koffice/koffice-l10n-nl-2.0.2.tar.bz2 --rw-r--r-- 1 root root 265677 2009-08-06 19:15 ./source/kdei/koffice/koffice-l10n-pl-2.0.2.tar.bz2 --rw-r--r-- 1 root root 874297 2009-08-06 19:16 ./source/kdei/koffice/koffice-l10n-pt-2.0.2.tar.bz2 --rw-r--r-- 1 root root 2008686 2009-08-06 19:21 ./source/kdei/koffice/koffice-l10n-pt_BR-2.0.2.tar.bz2 --rw-r--r-- 1 root root 5428252 2009-08-06 19:20 ./source/kdei/koffice/koffice-l10n-sv-2.0.2.tar.bz2 --rw-r--r-- 1 root root 232596 2009-08-06 19:20 ./source/kdei/koffice/koffice-l10n-tr-2.0.2.tar.bz2 --rw-r--r-- 1 root root 653243 2009-08-06 19:19 ./source/kdei/koffice/koffice-l10n-uk-2.0.2.tar.bz2 --rw-r--r-- 1 root root 234910 2009-08-06 19:19 ./source/kdei/koffice/koffice-l10n-wa-2.0.2.tar.bz2 --rw-r--r-- 1 root root 217799 2009-08-06 19:19 ./source/kdei/koffice/koffice-l10n-zh_CN-2.0.2.tar.bz2 --rw-r--r-- 1 root root 244029 2009-08-06 19:15 ./source/kdei/koffice/koffice-l10n-zh_TW-2.0.2.tar.bz2 --rwxr-xr-x 1 root root 4017 2009-08-12 22:25 ./source/kdei/koffice/koffice-l10n.SlackBuild --rw-r--r-- 1 root root 94 2009-08-12 22:28 ./source/kdei/koffice/languages -drwxr-xr-x 2 root root 4096 2009-06-05 22:51 ./source/kdei/koffice/slack-desc --rw-r--r-- 1 root root 709 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-af --rw-r--r-- 1 root root 240 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ar --rw-r--r-- 1 root root 711 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-az --rw-r--r-- 1 root root 243 2007-06-11 08:45 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-bg --rw-r--r-- 1 root root 706 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-br --rw-r--r-- 1 root root 241 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-bs --rw-r--r-- 1 root root 241 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ca --rw-r--r-- 1 root root 705 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-cs --rw-r--r-- 1 root root 239 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-cy --rw-r--r-- 1 root root 706 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-da --rw-r--r-- 1 root root 706 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-de --rw-r--r-- 1 root root 239 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-el --rw-r--r-- 1 root root 751 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-en_GB --rw-r--r-- 1 root root 709 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-eo --rw-r--r-- 1 root root 707 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-es --rw-r--r-- 1 root root 708 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-et --rw-r--r-- 1 root root 706 2006-01-29 02:25 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-eu --rw-r--r-- 1 root root 249 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-fa --rw-r--r-- 1 root root 241 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-fi --rw-r--r-- 1 root root 706 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-fr --rw-r--r-- 1 root root 243 2008-11-24 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-fy --rw-r--r-- 1 root root 712 2006-04-17 05:24 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ga --rw-r--r-- 1 root root 708 2007-02-16 22:10 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-gl --rw-r--r-- 1 root root 240 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-he --rw-r--r-- 1 root root 239 2006-04-17 05:25 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hi --rw-r--r-- 1 root root 259 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hsb --rw-r--r-- 1 root root 709 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hu --rw-r--r-- 1 root root 243 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-is --rw-r--r-- 1 root root 707 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-it --rw-r--r-- 1 root root 708 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ja --rw-r--r-- 1 root root 240 2008-11-24 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-kk --rw-r--r-- 1 root root 705 2007-04-22 20:28 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-km --rw-r--r-- 1 root root 237 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-lo --rw-r--r-- 1 root root 710 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-lt --rw-r--r-- 1 root root 241 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-lv --rw-r--r-- 1 root root 244 2007-02-16 22:11 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-mk --rw-r--r-- 1 root root 705 2006-06-02 20:44 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ms --rw-r--r-- 1 root root 707 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-mt --rw-r--r-- 1 root root 253 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-nb --rw-r--r-- 1 root root 255 2007-06-11 08:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-nds --rw-r--r-- 1 root root 240 2007-06-11 08:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ne --rw-r--r-- 1 root root 705 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-nl --rw-r--r-- 1 root root 253 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-nn --rw-r--r-- 1 root root 719 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-no --rw-r--r-- 1 root root 758 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-no_NY --rw-r--r-- 1 root root 706 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-pl --rw-r--r-- 1 root root 710 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-pt --rw-r--r-- 1 root root 756 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-pt_BR --rw-r--r-- 1 root root 708 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ro --rw-r--r-- 1 root root 707 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ru --rw-r--r-- 1 root root 713 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-se --rw-r--r-- 1 root root 706 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sk --rw-r--r-- 1 root root 709 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sl --rw-r--r-- 1 root root 707 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sr --rw-r--r-- 1 root root 788 2005-07-27 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sr@Latn --rw-r--r-- 1 root root 707 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sv --rw-r--r-- 1 root root 705 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ta --rw-r--r-- 1 root root 239 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-tg --rw-r--r-- 1 root root 238 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-th --rw-r--r-- 1 root root 707 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-tr --rw-r--r-- 1 root root 709 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-uk --rw-r--r-- 1 root root 239 2006-04-17 05:27 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-uz --rw-r--r-- 1 root root 251 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ven --rw-r--r-- 1 root root 707 2009-06-03 08:13 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-wa --rw-r--r-- 1 root root 239 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-xh --rw-r--r-- 1 root root 288 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-zh_CN --rw-r--r-- 1 root root 277 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-zh_TW --rw-r--r-- 1 root root 238 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-zu --rw-r--r-- 1 root root 186 2009-06-05 18:53 ./source/kdei/languages -drwxr-xr-x 2 root root 4096 2008-05-26 07:17 ./source/kdei/local.options -drwxr-xr-x 2 root root 4096 2009-03-31 12:51 ./source/kdei/slack-desc --rw-r--r-- 1 root root 188 2009-01-21 22:32 ./source/kdei/slack-desc/slack-desc.kde-l10n-ar --rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-bg --rw-r--r-- 1 root root 225 2009-03-06 20:29 ./source/kdei/slack-desc/slack-desc.kde-l10n-bn_IN --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-ca --rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-cs --rw-r--r-- 1 root root 203 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-csb --rw-r--r-- 1 root root 188 2008-07-26 01:24 ./source/kdei/slack-desc/slack-desc.kde-l10n-da --rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-de --rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-el --rw-r--r-- 1 root root 230 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-en_GB --rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-eo --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-es --rw-r--r-- 1 root root 190 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-et --rw-r--r-- 1 root root 188 2009-03-06 22:05 ./source/kdei/slack-desc/slack-desc.kde-l10n-eu --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-fi --rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-fr --rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-fy --rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-ga --rw-r--r-- 1 root root 190 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-gl --rw-r--r-- 1 root root 190 2009-01-21 22:33 ./source/kdei/slack-desc/slack-desc.kde-l10n-gu --rw-r--r-- 1 root root 188 2009-01-21 22:34 ./source/kdei/slack-desc/slack-desc.kde-l10n-he --rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-hi --rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-hu --rw-r--r-- 1 root root 191 2009-03-06 22:06 ./source/kdei/slack-desc/slack-desc.kde-l10n-is --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-it --rw-r--r-- 1 root root 190 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-ja --rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-kk --rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-km --rw-r--r-- 1 root root 189 2009-03-06 20:30 ./source/kdei/slack-desc/slack-desc.kde-l10n-kn --rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-ko --rw-r--r-- 1 root root 189 2008-07-26 01:59 ./source/kdei/slack-desc/slack-desc.kde-l10n-ku --rw-r--r-- 1 root root 192 2008-07-26 01:58 ./source/kdei/slack-desc/slack-desc.kde-l10n-lt --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-lv --rw-r--r-- 1 root root 202 2009-01-27 05:28 ./source/kdei/slack-desc/slack-desc.kde-l10n-mai --rw-r--r-- 1 root root 192 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-mk --rw-r--r-- 1 root root 191 2008-07-26 01:59 ./source/kdei/slack-desc/slack-desc.kde-l10n-ml --rw-r--r-- 1 root root 189 2009-03-06 20:31 ./source/kdei/slack-desc/slack-desc.kde-l10n-mr --rw-r--r-- 1 root root 201 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-nb --rw-r--r-- 1 root root 203 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-nds --rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-nl --rw-r--r-- 1 root root 201 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-nn --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-pa --rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-pl --rw-r--r-- 1 root root 192 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-pt --rw-r--r-- 1 root root 238 2008-05-26 07:01 ./source/kdei/slack-desc/slack-desc.kde-l10n-pt_BR --rw-r--r-- 1 root root 190 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-ro --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-ru --rw-r--r-- 1 root root 188 2009-04-03 21:25 ./source/kdei/slack-desc/slack-desc.kde-l10n-sk --rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-sl --rw-r--r-- 1 root root 189 2008-07-26 01:58 ./source/kdei/slack-desc/slack-desc.kde-l10n-sr --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-sv --rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-ta --rw-r--r-- 1 root root 187 2009-03-06 22:07 ./source/kdei/slack-desc/slack-desc.kde-l10n-tg --rw-r--r-- 1 root root 186 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-th --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-tr --rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-uk --rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-wa --rw-r--r-- 1 root root 236 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-zh_CN --rw-r--r-- 1 root root 225 2008-05-26 06:46 ./source/kdei/slack-desc/slack-desc.kde-l10n-zh_TW -drwxr-xr-x 167 root root 4096 2009-08-25 02:11 ./source/l -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/M2Crypto --rw-r--r-- 1 root root 309578 2009-02-23 00:48 ./source/l/M2Crypto/M2Crypto-0.19.1.tar.bz2 --rwxr-xr-x 1 root root 2428 2009-05-19 20:05 ./source/l/M2Crypto/M2Crypto.SlackBuild --rw-r--r-- 1 root root 1050 2009-03-31 01:47 ./source/l/M2Crypto/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/PyQt --rw-r--r-- 1 root root 6085598 2008-12-18 19:57 ./source/l/PyQt/PyQt-x11-gpl-4.4.4.tar.bz2 --rwxr-xr-x 1 root root 2580 2009-05-19 20:05 ./source/l/PyQt/PyQt.SlackBuild --rw-r--r-- 1 root root 158 2008-05-26 07:48 ./source/l/PyQt/PyQt.info --rw-r--r-- 1 root root 732 2008-07-31 03:50 ./source/l/PyQt/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/QScintilla --rw-r--r-- 1 root root 1449615 2008-11-17 13:54 ./source/l/QScintilla/QScintilla-gpl-2.3.2.tar.bz2 --rwxr-xr-x 1 root root 2758 2009-05-19 20:05 ./source/l/QScintilla/QScintilla.SlackBuild --rw-r--r-- 1 root root 310 2008-05-26 02:36 ./source/l/QScintilla/QScintilla.info --rw-r--r-- 1 root root 1127 2008-07-31 04:32 ./source/l/QScintilla/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/aalib --rw-r--r-- 1 root root 391028 2001-04-26 15:56 ./source/l/aalib/aalib-1.4rc5.tar.gz --rwxr-xr-x 1 root root 3396 2009-05-19 20:05 ./source/l/aalib/aalib.SlackBuild --rw-r--r-- 1 root root 1451 2002-03-28 07:45 ./source/l/aalib/slack-desc --rw-r--r-- 1 root root 1305 2002-03-28 07:43 ./source/l/aalib/slack-desc.11line -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/akonadi --rw-r--r-- 1 root root 135407 2009-04-30 19:29 ./source/l/akonadi/akonadi-1.1.2.tar.bz2 --rwxr-xr-x 1 root root 2809 2009-05-19 20:05 ./source/l/akonadi/akonadi.SlackBuild --rw-r--r-- 1 root root 110 2008-04-30 19:12 ./source/l/akonadi/doinst.sh.gz --rw-r--r-- 1 root root 840 2008-08-01 03:37 ./source/l/akonadi/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/alsa-lib --rw-r--r-- 1 root root 790052 2008-10-29 12:51 ./source/l/alsa-lib/alsa-lib-1.0.18.tar.bz2 --rwxr-xr-x 1 root root 2621 2009-05-19 20:05 ./source/l/alsa-lib/alsa-lib.SlackBuild --rw-r--r-- 1 root root 861 2003-08-29 05:32 ./source/l/alsa-lib/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/alsa-oss --rw-r--r-- 1 root root 248726 2008-07-14 09:20 ./source/l/alsa-oss/alsa-oss-1.0.17.tar.bz2 --rwxr-xr-x 1 root root 2601 2009-05-19 20:05 ./source/l/alsa-oss/alsa-oss.SlackBuild --rw-r--r-- 1 root root 962 2003-08-29 06:30 ./source/l/alsa-oss/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-06 20:37 ./source/l/apr -drwxr-xr-x 2 root root 4096 2009-08-06 20:38 ./source/l/apr-util --rw-r--r-- 1 root root 589942 2009-08-04 21:09 ./source/l/apr-util/apr-util-1.3.9.tar.bz2 --rw-r--r-- 1 root root 835 2009-08-04 21:09 ./source/l/apr-util/apr-util-1.3.9.tar.bz2.asc --rwxr-xr-x 1 root root 3205 2009-08-06 23:09 ./source/l/apr-util/apr-util.SlackBuild --rw-r--r-- 1 root root 942 2006-07-29 21:51 ./source/l/apr-util/slack-desc --rw-r--r-- 1 root root 940394 2009-08-04 21:08 ./source/l/apr/apr-1.3.8.tar.bz2 --rw-r--r-- 1 root root 835 2009-08-04 21:08 ./source/l/apr/apr-1.3.8.tar.bz2.asc --rwxr-xr-x 1 root root 2694 2009-08-06 23:06 ./source/l/apr/apr.SlackBuild --rw-r--r-- 1 root root 729 2006-07-29 07:49 ./source/l/apr/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/aspell -drwxr-xr-x 2 root root 4096 2009-08-13 02:39 ./source/l/aspell-dict --rw-r--r-- 1 root root 256111 2004-03-15 00:39 ./source/l/aspell-dict/aspell-af-0.50-0.tar.bz2 --rw-r--r-- 1 root root 68055 2003-04-17 02:03 ./source/l/aspell-dict/aspell-br-0.50-2.tar.bz2 --rw-r--r-- 1 root root 117652 2003-04-17 02:03 ./source/l/aspell-dict/aspell-cy-0.50-3.tar.bz2 --rwxr-xr-x 1 root root 2446 2009-05-19 20:05 ./source/l/aspell-dict/aspell-dict.SlackBuild --rw-r--r-- 1 root root 328225 2003-04-17 02:03 ./source/l/aspell-dict/aspell-el-0.50-3.tar.bz2 --rw-r--r-- 1 root root 89703 2003-04-17 02:03 ./source/l/aspell-dict/aspell-eo-0.50-2.tar.bz2 --rw-r--r-- 1 root root 157809 2003-04-17 02:03 ./source/l/aspell-dict/aspell-es-0.50-2.tar.bz2 --rw-r--r-- 1 root root 283086 2003-04-17 02:03 ./source/l/aspell-dict/aspell-fr-0.50-3.tar.bz2 --rw-r--r-- 1 root root 112313 2004-03-10 09:57 ./source/l/aspell-dict/aspell-gl-0.50-0.tar.bz2 --rw-r--r-- 1 root root 69462 2004-04-05 21:17 ./source/l/aspell-dict/aspell-gv-0.50-0.tar.bz2 --rw-r--r-- 1 root root 208118 2004-03-30 08:07 ./source/l/aspell-dict/aspell-hr-0.51-0.tar.bz2 --rw-r--r-- 1 root root 70883 2004-03-30 10:04 ./source/l/aspell-dict/aspell-ia-0.50-1.tar.bz2 --rw-r--r-- 1 root root 323850 2004-03-13 11:17 ./source/l/aspell-dict/aspell-is-0.51.1-0.tar.bz2 --rw-r--r-- 1 root root 57818 2004-03-15 00:40 ./source/l/aspell-dict/aspell-mi-0.50-0.tar.bz2 --rw-r--r-- 1 root root 122690 2004-04-23 18:46 ./source/l/aspell-dict/aspell-mk-0.50-0.tar.bz2 --rw-r--r-- 1 root root 50368 2004-03-15 00:40 ./source/l/aspell-dict/aspell-ms-0.50-0.tar.bz2 --rw-r--r-- 1 root root 124114 2004-03-25 00:02 ./source/l/aspell-dict/aspell-mt-0.50-0.tar.bz2 --rw-r--r-- 1 root root 423161 2009-07-21 19:10 ./source/l/aspell-dict/aspell-nb-0.50.1-0.tar.bz2 --rw-r--r-- 1 root root 428365 2003-04-17 02:03 ./source/l/aspell-dict/aspell-nl-0.50-2.tar.bz2 --rw-r--r-- 1 root root 335156 2004-04-05 07:11 ./source/l/aspell-dict/aspell-nn-0.50.1-1.tar.bz2 --rw-r--r-- 1 root root 286696 2003-04-17 02:03 ./source/l/aspell-dict/aspell-no-0.50-2.tar.bz2 --rw-r--r-- 1 root root 624458 2004-03-10 09:47 ./source/l/aspell-dict/aspell-pl-0.51-0.tar.bz2 --rw-r--r-- 1 root root 201341 2003-04-17 02:03 ./source/l/aspell-dict/aspell-pt-0.50-2.tar.bz2 --rw-r--r-- 1 root root 64110 2003-04-17 02:03 ./source/l/aspell-dict/aspell-ro-0.50-2.tar.bz2 --rw-r--r-- 1 root root 21821 2004-05-19 18:04 ./source/l/aspell-dict/aspell-rw-0.50-0.tar.bz2 --rw-r--r-- 1 root root 383840 2004-04-16 02:14 ./source/l/aspell-dict/aspell-sk-0.52-0.tar.bz2 --rw-r--r-- 1 root root 215463 2004-03-15 00:40 ./source/l/aspell-dict/aspell-sl-0.50-0.tar.bz2 --rw-r--r-- 1 root root 93942 2004-03-10 09:48 ./source/l/aspell-dict/aspell-sv-0.51-0.tar.bz2 --rw-r--r-- 1 root root 102172 2004-03-29 12:07 ./source/l/aspell-dict/aspell-sw-0.50-0.tar.bz2 --rw-r--r-- 1 root root 84846 2004-03-29 10:22 ./source/l/aspell-dict/aspell-tr-0.50-0.tar.bz2 --rw-r--r-- 1 root root 382513 2004-03-10 09:48 ./source/l/aspell-dict/aspell-uk-0.51-0.tar.bz2 --rw-r--r-- 1 root root 50363 2004-03-29 09:35 ./source/l/aspell-dict/aspell-wa-0.50-0.tar.bz2 --rw-r--r-- 1 root root 168226 2004-03-29 12:07 ./source/l/aspell-dict/aspell-zu-0.50-0.tar.bz2 --rw-r--r-- 1 root root 653405 2004-07-05 21:42 ./source/l/aspell-dict/aspell5-be-0.01.tar.bz2 --rw-r--r-- 1 root root 176676 2004-05-28 15:49 ./source/l/aspell-dict/aspell5-bg-4.0-0.tar.bz2 --rw-r--r-- 1 root root 317688 2004-08-13 02:35 ./source/l/aspell-dict/aspell5-da-1.4.42-1.tar.bz2 --rw-r--r-- 1 root root 165901 2004-08-13 02:36 ./source/l/aspell-dict/aspell5-fo-0.2.16-1.tar.bz2 --rw-r--r-- 1 root root 539910 2005-01-07 21:36 ./source/l/aspell-dict/aspell5-ga-3.6-0.tar.bz2 --rw-r--r-- 1 root root 51167 2004-08-13 02:37 ./source/l/aspell-dict/aspell5-gd-0.1.1-1.tar.bz2 --rw-r--r-- 1 root root 46288 2005-04-06 22:05 ./source/l/aspell-dict/aspell5-hil-0.11-0.tar.bz2 --rw-r--r-- 1 root root 76958 2004-08-12 15:04 ./source/l/aspell-dict/aspell5-id-1.2-0.tar.bz2 --rw-r--r-- 1 root root 23870 2004-09-22 17:27 ./source/l/aspell-dict/aspell5-ku-0.12-0.tar.bz2 --rw-r--r-- 1 root root 45331 2004-09-10 23:38 ./source/l/aspell-dict/aspell5-mg-0.03-0.tar.bz2 --rw-r--r-- 1 root root 22952 2004-08-10 14:49 ./source/l/aspell-dict/aspell5-ny-0.01-0.tar.bz2 --rw-r--r-- 1 root root 281538 2004-06-01 13:33 ./source/l/aspell-dict/aspell5-sc-1.0.tar.bz2 --rw-r--r-- 1 root root 33044 2004-06-02 14:11 ./source/l/aspell-dict/aspell5-tet-0.1.1.tar.bz2 --rw-r--r-- 1 root root 40642 2004-08-06 15:21 ./source/l/aspell-dict/aspell5-tl-0.02-1.tar.bz2 --rw-r--r-- 1 root root 22127 2004-08-13 02:38 ./source/l/aspell-dict/aspell5-tn-1.0.1-0.tar.bz2 --rw-r--r-- 1 root root 40493 2004-12-28 14:21 ./source/l/aspell-dict/aspell6-am-0.03-1.tar.bz2 --rw-r--r-- 1 root root 50588 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-az-0.02-0.tar.bz2 --rw-r--r-- 1 root root 117436 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-bn-0.01.1-1.tar.bz2 --rw-r--r-- 1 root root 222986 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-ca-20040130-1.tar.bz2 --rw-r--r-- 1 root root 451507 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-cs-20040614-1.tar.bz2 --rw-r--r-- 1 root root 32694 2005-03-11 20:40 ./source/l/aspell-dict/aspell6-csb-0.02-0.tar.bz2 --rw-r--r-- 1 root root 274407 2004-11-04 02:48 ./source/l/aspell-dict/aspell6-de-20030222-1.tar.bz2 +-rw-r--r-- 1 root root 348 2010-02-22 19:59 ./slackware64/x/bigreqsproto-1.1.0-noarch-1.txt +-rw-r--r-- 1 root root 4052 2010-02-22 19:59 ./slackware64/x/bigreqsproto-1.1.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 19:59 ./slackware64/x/bigreqsproto-1.1.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:09 ./slackware64/x/bitmap-1.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 51764 2010-02-22 20:09 ./slackware64/x/bitmap-1.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:09 ./slackware64/x/bitmap-1.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-04-27 21:02 ./slackware64/x/compiz-0.8.6-x86_64-1.txt +-rw-r--r-- 1 root root 805548 2010-04-27 21:02 ./slackware64/x/compiz-0.8.6-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 21:02 ./slackware64/x/compiz-0.8.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 19:59 ./slackware64/x/compositeproto-0.4.1-noarch-1.txt +-rw-r--r-- 1 root root 10188 2010-02-22 19:59 ./slackware64/x/compositeproto-0.4.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 19:59 ./slackware64/x/compositeproto-0.4.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 335 2010-02-22 19:59 ./slackware64/x/damageproto-1.2.0-noarch-1.txt +-rw-r--r-- 1 root root 7500 2010-02-22 19:59 ./slackware64/x/damageproto-1.2.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 19:59 ./slackware64/x/damageproto-1.2.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 536 2009-11-05 22:11 ./slackware64/x/dejavu-fonts-ttf-2.30-noarch-1.txt +-rw-r--r-- 1 root root 2049780 2009-11-05 22:11 ./slackware64/x/dejavu-fonts-ttf-2.30-noarch-1.txz +-rw-r--r-- 1 root root 197 2009-11-05 22:11 ./slackware64/x/dejavu-fonts-ttf-2.30-noarch-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 19:59 ./slackware64/x/dmxproto-2.3-noarch-1.txt +-rw-r--r-- 1 root root 5132 2010-02-22 19:59 ./slackware64/x/dmxproto-2.3-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 19:59 ./slackware64/x/dmxproto-2.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 309 2010-02-22 20:00 ./slackware64/x/dri2proto-2.3-x86_64-1.txt +-rw-r--r-- 1 root root 10420 2010-02-22 20:00 ./slackware64/x/dri2proto-2.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/dri2proto-2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:10 ./slackware64/x/editres-1.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 39848 2010-02-22 20:10 ./slackware64/x/editres-1.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:10 ./slackware64/x/editres-1.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 309 2010-02-22 20:25 ./slackware64/x/encodings-1.0.3-noarch-1.txt +-rw-r--r-- 1 root root 574420 2010-02-22 20:25 ./slackware64/x/encodings-1.0.3-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:25 ./slackware64/x/encodings-1.0.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:00 ./slackware64/x/evieext-1.1.0-noarch-1.txt +-rw-r--r-- 1 root root 4576 2010-02-22 20:00 ./slackware64/x/evieext-1.1.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/evieext-1.1.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:00 ./slackware64/x/fixesproto-4.1.1-noarch-1.txt +-rw-r--r-- 1 root root 11796 2010-02-22 20:00 ./slackware64/x/fixesproto-4.1.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/fixesproto-4.1.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:25 ./slackware64/x/font-adobe-100dpi-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 6182516 2010-02-22 20:25 ./slackware64/x/font-adobe-100dpi-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:25 ./slackware64/x/font-adobe-100dpi-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:25 ./slackware64/x/font-adobe-75dpi-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 5470236 2010-02-22 20:25 ./slackware64/x/font-adobe-75dpi-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:25 ./slackware64/x/font-adobe-75dpi-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 504 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-100dpi-1.0.2-noarch-1.txt +-rw-r--r-- 1 root root 1464476 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-100dpi-1.0.2-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-100dpi-1.0.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 491 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-75dpi-1.0.2-noarch-1.txt +-rw-r--r-- 1 root root 1217608 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-75dpi-1.0.2-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-75dpi-1.0.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 491 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-type1-1.0.2-noarch-1.txt +-rw-r--r-- 1 root root 169884 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-type1-1.0.2-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-adobe-utopia-type1-1.0.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:26 ./slackware64/x/font-alias-1.0.2-noarch-1.txt +-rw-r--r-- 1 root root 5016 2010-02-22 20:26 ./slackware64/x/font-alias-1.0.2-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-alias-1.0.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:26 ./slackware64/x/font-arabic-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 17128 2010-02-22 20:26 ./slackware64/x/font-arabic-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-arabic-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:26 ./slackware64/x/font-bh-100dpi-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 3781452 2010-02-22 20:26 ./slackware64/x/font-bh-100dpi-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-bh-100dpi-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:26 ./slackware64/x/font-bh-75dpi-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 3247528 2010-02-22 20:26 ./slackware64/x/font-bh-75dpi-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-bh-75dpi-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 595 2010-02-22 20:26 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 854580 2010-02-22 20:26 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-bh-lucidatypewriter-100dpi-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 582 2010-02-22 20:26 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 745396 2010-02-22 20:26 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:26 ./slackware64/x/font-bh-lucidatypewriter-75dpi-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 335 2010-02-22 20:27 ./slackware64/x/font-bh-ttf-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 279216 2010-02-22 20:27 ./slackware64/x/font-bh-ttf-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-bh-ttf-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:27 ./slackware64/x/font-bh-type1-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 526492 2010-02-22 20:27 ./slackware64/x/font-bh-type1-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-bh-type1-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 465 2010-02-22 20:27 ./slackware64/x/font-bitstream-100dpi-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 164148 2010-02-22 20:27 ./slackware64/x/font-bitstream-100dpi-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-bitstream-100dpi-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 452 2010-02-22 20:27 ./slackware64/x/font-bitstream-75dpi-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 143880 2010-02-22 20:27 ./slackware64/x/font-bitstream-75dpi-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-bitstream-75dpi-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 465 2010-02-22 20:27 ./slackware64/x/font-bitstream-speedo-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 241008 2010-02-22 20:27 ./slackware64/x/font-bitstream-speedo-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-bitstream-speedo-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 452 2010-02-22 20:27 ./slackware64/x/font-bitstream-type1-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 303132 2010-02-22 20:27 ./slackware64/x/font-bitstream-type1-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-bitstream-type1-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 452 2010-02-22 20:27 ./slackware64/x/font-cronyx-cyrillic-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 305844 2010-02-22 20:27 ./slackware64/x/font-cronyx-cyrillic-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-cronyx-cyrillic-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:27 ./slackware64/x/font-cursor-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 8340 2010-02-22 20:27 ./slackware64/x/font-cursor-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-cursor-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:27 ./slackware64/x/font-daewoo-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 664104 2010-02-22 20:27 ./slackware64/x/font-daewoo-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-daewoo-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:27 ./slackware64/x/font-dec-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 6968 2010-02-22 20:27 ./slackware64/x/font-dec-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-dec-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:27 ./slackware64/x/font-ibm-type1-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 279648 2010-02-22 20:27 ./slackware64/x/font-ibm-type1-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-ibm-type1-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:27 ./slackware64/x/font-isas-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 801296 2010-02-22 20:27 ./slackware64/x/font-isas-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-isas-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:27 ./slackware64/x/font-jis-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 539560 2010-02-22 20:27 ./slackware64/x/font-jis-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-jis-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 387 2010-02-22 20:27 ./slackware64/x/font-micro-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 5036 2010-02-22 20:27 ./slackware64/x/font-micro-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-micro-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 426 2010-02-22 20:27 ./slackware64/x/font-misc-cyrillic-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 69684 2010-02-22 20:27 ./slackware64/x/font-misc-cyrillic-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-misc-cyrillic-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 426 2010-02-22 20:27 ./slackware64/x/font-misc-ethiopic-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 132084 2010-02-22 20:27 ./slackware64/x/font-misc-ethiopic-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-misc-ethiopic-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:27 ./slackware64/x/font-misc-meltho-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 739524 2010-02-22 20:27 ./slackware64/x/font-misc-meltho-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:27 ./slackware64/x/font-misc-meltho-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:28 ./slackware64/x/font-misc-misc-1.1.0-noarch-1.txt +-rw-r--r-- 1 root root 3516952 2010-02-22 20:28 ./slackware64/x/font-misc-misc-1.1.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-misc-misc-1.1.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:28 ./slackware64/x/font-mutt-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 212312 2010-02-22 20:28 ./slackware64/x/font-mutt-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-mutt-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 452 2010-02-22 20:28 ./slackware64/x/font-schumacher-misc-1.1.0-noarch-1.txt +-rw-r--r-- 1 root root 157508 2010-02-22 20:28 ./slackware64/x/font-schumacher-misc-1.1.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-schumacher-misc-1.1.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 452 2010-02-22 20:28 ./slackware64/x/font-screen-cyrillic-1.0.2-noarch-1.txt +-rw-r--r-- 1 root root 13056 2010-02-22 20:28 ./slackware64/x/font-screen-cyrillic-1.0.2-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-screen-cyrillic-1.0.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:28 ./slackware64/x/font-sony-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 23476 2010-02-22 20:28 ./slackware64/x/font-sony-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-sony-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:28 ./slackware64/x/font-sun-misc-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 29608 2010-02-22 20:28 ./slackware64/x/font-sun-misc-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-sun-misc-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 309 2010-02-22 20:28 ./slackware64/x/font-util-1.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 30340 2010-02-22 20:28 ./slackware64/x/font-util-1.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-util-1.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 478 2010-02-22 20:28 ./slackware64/x/font-winitzki-cyrillic-1.0.1-noarch-1.txt +-rw-r--r-- 1 root root 8272 2010-02-22 20:28 ./slackware64/x/font-winitzki-cyrillic-1.0.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-winitzki-cyrillic-1.0.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 426 2010-02-22 20:28 ./slackware64/x/font-xfree86-type1-1.0.2-noarch-1.txt +-rw-r--r-- 1 root root 31532 2010-02-22 20:28 ./slackware64/x/font-xfree86-type1-1.0.2-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:28 ./slackware64/x/font-xfree86-type1-1.0.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:00 ./slackware64/x/fontcacheproto-0.1.3-noarch-1.txt +-rw-r--r-- 1 root root 5180 2010-02-22 20:00 ./slackware64/x/fontcacheproto-0.1.3-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/fontcacheproto-0.1.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 348 2010-02-20 20:56 ./slackware64/x/fontconfig-2.8.0-x86_64-1.txt +-rw-r--r-- 1 root root 272112 2010-02-20 20:56 ./slackware64/x/fontconfig-2.8.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-20 20:56 ./slackware64/x/fontconfig-2.8.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:00 ./slackware64/x/fontsproto-2.1.0-noarch-1.txt +-rw-r--r-- 1 root root 11360 2010-02-22 20:00 ./slackware64/x/fontsproto-2.1.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/fontsproto-2.1.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 322 2009-06-03 05:38 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 16584 2009-06-03 05:38 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/fonttosfnt-1.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 309 2009-06-03 05:38 ./slackware64/x/fslsfonts-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 7476 2009-06-03 05:38 ./slackware64/x/fslsfonts-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/fslsfonts-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2009-06-03 05:38 ./slackware64/x/fstobdf-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 6916 2009-06-03 05:38 ./slackware64/x/fstobdf-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/fstobdf-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2009-06-03 05:26 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txt +-rw-r--r-- 1 root root 3016 2009-06-03 05:26 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/gccmakedep-1.0.2-noarch-2.txz.asc +-rw-r--r-- 1 root root 385 2009-08-04 00:34 ./slackware64/x/glew-1.5.1-x86_64-1.txt +-rw-r--r-- 1 root root 221688 2009-08-04 00:34 ./slackware64/x/glew-1.5.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-08-04 00:34 ./slackware64/x/glew-1.5.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:00 ./slackware64/x/glproto-1.4.11-noarch-1.txt +-rw-r--r-- 1 root root 27336 2010-02-22 20:00 ./slackware64/x/glproto-1.4.11-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/glproto-1.4.11-noarch-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:10 ./slackware64/x/iceauth-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 16684 2010-02-22 20:10 ./slackware64/x/iceauth-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:10 ./slackware64/x/iceauth-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 231 2009-06-03 05:38 ./slackware64/x/ico-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 12316 2009-06-03 05:38 ./slackware64/x/ico-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/ico-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 257 2010-04-27 20:52 ./slackware64/x/imake-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 38152 2010-04-27 20:52 ./slackware64/x/imake-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 20:52 ./slackware64/x/imake-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:00 ./slackware64/x/inputproto-2.0-noarch-1.txt +-rw-r--r-- 1 root root 22796 2010-02-22 20:00 ./slackware64/x/inputproto-2.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/inputproto-2.0-noarch-1.txz.asc +-rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/x/install-packages +-rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/x/install.end +-rw-r--r-- 1 root root 420 2010-02-22 20:10 ./slackware64/x/intel-gpu-tools-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 34396 2010-02-22 20:10 ./slackware64/x/intel-gpu-tools-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:10 ./slackware64/x/intel-gpu-tools-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:00 ./slackware64/x/kbproto-1.0.4-noarch-1.txt +-rw-r--r-- 1 root root 25024 2010-02-22 20:00 ./slackware64/x/kbproto-1.0.4-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/kbproto-1.0.4-noarch-1.txz.asc +-rw-r--r-- 1 root root 257 2009-07-16 22:27 ./slackware64/x/libFS-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 23296 2009-07-16 22:27 ./slackware64/x/libFS-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-07-16 22:27 ./slackware64/x/libFS-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:02 ./slackware64/x/libICE-1.0.6-x86_64-1.txt +-rw-r--r-- 1 root root 52056 2010-02-22 20:02 ./slackware64/x/libICE-1.0.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:02 ./slackware64/x/libICE-1.0.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:02 ./slackware64/x/libSM-1.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 25720 2010-02-22 20:02 ./slackware64/x/libSM-1.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:02 ./slackware64/x/libSM-1.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:04 ./slackware64/x/libX11-1.3.3-x86_64-1.txt +-rw-r--r-- 1 root root 3198720 2010-02-22 20:04 ./slackware64/x/libX11-1.3.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:04 ./slackware64/x/libX11-1.3.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:04 ./slackware64/x/libXScrnSaver-1.2.0-x86_64-1.txt +-rw-r--r-- 1 root root 17332 2010-02-22 20:04 ./slackware64/x/libXScrnSaver-1.2.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:04 ./slackware64/x/libXScrnSaver-1.2.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:30 ./slackware64/x/libXTrap-1.0.0-x86_64-2.txt +-rw-r--r-- 1 root root 13612 2009-06-03 05:30 ./slackware64/x/libXTrap-1.0.0-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:30 ./slackware64/x/libXTrap-1.0.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:04 ./slackware64/x/libXau-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 20456 2010-02-22 20:04 ./slackware64/x/libXau-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:04 ./slackware64/x/libXau-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:05 ./slackware64/x/libXaw-1.0.7-x86_64-1.txt +-rw-r--r-- 1 root root 499568 2010-02-22 20:05 ./slackware64/x/libXaw-1.0.7-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:05 ./slackware64/x/libXaw-1.0.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:05 ./slackware64/x/libXcomposite-0.4.1-x86_64-1.txt +-rw-r--r-- 1 root root 13500 2010-02-22 20:05 ./slackware64/x/libXcomposite-0.4.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:05 ./slackware64/x/libXcomposite-0.4.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:05 ./slackware64/x/libXcursor-1.1.10-x86_64-1.txt +-rw-r--r-- 1 root root 34320 2010-02-22 20:05 ./slackware64/x/libXcursor-1.1.10-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:05 ./slackware64/x/libXcursor-1.1.10-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:05 ./slackware64/x/libXdamage-1.1.2-x86_64-1.txt +-rw-r--r-- 1 root root 9708 2010-02-22 20:05 ./slackware64/x/libXdamage-1.1.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:05 ./slackware64/x/libXdamage-1.1.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:05 ./slackware64/x/libXdmcp-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 19764 2010-02-22 20:05 ./slackware64/x/libXdmcp-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:05 ./slackware64/x/libXdmcp-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:31 ./slackware64/x/libXevie-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 5852 2009-06-03 05:31 ./slackware64/x/libXevie-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:31 ./slackware64/x/libXevie-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:05 ./slackware64/x/libXext-1.1-x86_64-1.txt +-rw-r--r-- 1 root root 93096 2010-02-22 20:05 ./slackware64/x/libXext-1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:05 ./slackware64/x/libXext-1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 309 2010-02-22 20:06 ./slackware64/x/libXfixes-4.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 15224 2010-02-22 20:06 ./slackware64/x/libXfixes-4.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:06 ./slackware64/x/libXfixes-4.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:06 ./slackware64/x/libXfont-1.4.1-x86_64-1.txt +-rw-r--r-- 1 root root 131792 2010-02-22 20:06 ./slackware64/x/libXfont-1.4.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:06 ./slackware64/x/libXfont-1.4.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:06 ./slackware64/x/libXfontcache-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 14896 2010-02-22 20:06 ./slackware64/x/libXfontcache-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:06 ./slackware64/x/libXfontcache-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:06 ./slackware64/x/libXft-2.1.14-x86_64-1.txt +-rw-r--r-- 1 root root 52548 2010-02-22 20:06 ./slackware64/x/libXft-2.1.14-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:06 ./slackware64/x/libXft-2.1.14-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:06 ./slackware64/x/libXi-1.3-x86_64-1.txt +-rw-r--r-- 1 root root 106512 2010-02-22 20:06 ./slackware64/x/libXi-1.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:06 ./slackware64/x/libXi-1.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 335 2010-02-22 20:06 ./slackware64/x/libXinerama-1.1-x86_64-1.txt +-rw-r--r-- 1 root root 12448 2010-02-22 20:06 ./slackware64/x/libXinerama-1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:06 ./slackware64/x/libXinerama-1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:06 ./slackware64/x/libXmu-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 61300 2010-02-22 20:06 ./slackware64/x/libXmu-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:06 ./slackware64/x/libXmu-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2009-06-03 05:33 ./slackware64/x/libXp-1.0.0-x86_64-2.txt +-rw-r--r-- 1 root root 77220 2009-06-03 05:33 ./slackware64/x/libXp-1.0.0-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXp-1.0.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:07 ./slackware64/x/libXpm-3.5.8-x86_64-1.txt +-rw-r--r-- 1 root root 62692 2010-02-22 20:07 ./slackware64/x/libXpm-3.5.8-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:07 ./slackware64/x/libXpm-3.5.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2009-06-03 05:33 ./slackware64/x/libXprintAppUtil-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 7672 2009-06-03 05:33 ./slackware64/x/libXprintAppUtil-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXprintAppUtil-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 361 2009-06-03 05:33 ./slackware64/x/libXprintUtil-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 15644 2009-06-03 05:33 ./slackware64/x/libXprintUtil-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXprintUtil-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 309 2009-06-03 05:33 ./slackware64/x/libXrandr-1.3.0-x86_64-1.txt +-rw-r--r-- 1 root root 20872 2009-06-03 05:33 ./slackware64/x/libXrandr-1.3.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:33 ./slackware64/x/libXrandr-1.3.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:07 ./slackware64/x/libXrender-0.9.5-x86_64-1.txt +-rw-r--r-- 1 root root 26120 2010-02-22 20:07 ./slackware64/x/libXrender-0.9.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:07 ./slackware64/x/libXrender-0.9.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:07 ./slackware64/x/libXres-1.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 14520 2010-02-22 20:07 ./slackware64/x/libXres-1.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:07 ./slackware64/x/libXres-1.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2010-03-18 21:45 ./slackware64/x/libXt-1.0.8-x86_64-1.txt +-rw-r--r-- 1 root root 428064 2010-03-18 21:45 ./slackware64/x/libXt-1.0.8-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-18 21:45 ./slackware64/x/libXt-1.0.8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:08 ./slackware64/x/libXtst-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 19736 2010-02-22 20:08 ./slackware64/x/libXtst-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libXtst-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:08 ./slackware64/x/libXv-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 37304 2010-02-22 20:08 ./slackware64/x/libXv-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libXv-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:08 ./slackware64/x/libXvMC-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 24040 2010-02-22 20:08 ./slackware64/x/libXvMC-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libXvMC-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 335 2010-02-22 20:08 ./slackware64/x/libXxf86dga-1.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 20708 2010-02-22 20:08 ./slackware64/x/libXxf86dga-1.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libXxf86dga-1.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 348 2010-02-22 20:08 ./slackware64/x/libXxf86misc-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 11912 2010-02-22 20:08 ./slackware64/x/libXxf86misc-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libXxf86misc-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:08 ./slackware64/x/libXxf86vm-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 17528 2010-02-22 20:08 ./slackware64/x/libXxf86vm-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libXxf86vm-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:08 ./slackware64/x/libdmx-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 36392 2010-02-22 20:08 ./slackware64/x/libdmx-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libdmx-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 260 2010-04-27 20:04 ./slackware64/x/libdrm-2.4.20-x86_64-1.txt +-rw-r--r-- 1 root root 124076 2010-04-27 20:04 ./slackware64/x/libdrm-2.4.20-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 20:04 ./slackware64/x/libdrm-2.4.20-x86_64-1.txz.asc +-rw-r--r-- 1 root root 581 2008-11-06 15:32 ./slackware64/x/liberation-fonts-ttf-1.04-noarch-1.txt +-rw-r--r-- 1 root root 683360 2008-11-06 15:32 ./slackware64/x/liberation-fonts-ttf-1.04-noarch-1.txz +-rw-r--r-- 1 root root 197 2008-11-06 15:32 ./slackware64/x/liberation-fonts-ttf-1.04-noarch-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:08 ./slackware64/x/libfontenc-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 17432 2010-02-22 20:08 ./slackware64/x/libfontenc-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libfontenc-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 381 2008-11-05 14:32 ./slackware64/x/libhangul-0.0.7-x86_64-1.txt +-rw-r--r-- 1 root root 1857876 2008-11-05 14:32 ./slackware64/x/libhangul-0.0.7-x86_64-1.txz +-rw-r--r-- 1 root root 197 2008-11-05 14:32 ./slackware64/x/libhangul-0.0.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 348 2010-02-22 20:08 ./slackware64/x/libpciaccess-0.11.0-x86_64-1.txt +-rw-r--r-- 1 root root 32516 2010-02-22 20:08 ./slackware64/x/libpciaccess-0.11.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:08 ./slackware64/x/libpciaccess-0.11.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:01 ./slackware64/x/libpthread-stubs-0.3-noarch-1.txt +-rw-r--r-- 1 root root 1904 2010-02-22 20:01 ./slackware64/x/libpthread-stubs-0.3-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:01 ./slackware64/x/libpthread-stubs-0.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 446 2010-04-27 20:53 ./slackware64/x/libxcb-1.6-x86_64-1.txt +-rw-r--r-- 1 root root 221768 2010-04-27 20:53 ./slackware64/x/libxcb-1.6-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 20:53 ./slackware64/x/libxcb-1.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:09 ./slackware64/x/libxkbfile-1.0.6-x86_64-1.txt +-rw-r--r-- 1 root root 70656 2010-02-22 20:09 ./slackware64/x/libxkbfile-1.0.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:09 ./slackware64/x/libxkbfile-1.0.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:36 ./slackware64/x/libxkbui-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 8080 2009-06-03 05:36 ./slackware64/x/libxkbui-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:36 ./slackware64/x/libxkbui-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:10 ./slackware64/x/listres-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 14712 2010-02-22 20:10 ./slackware64/x/listres-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:10 ./slackware64/x/listres-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2009-06-03 05:26 ./slackware64/x/lndir-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 6580 2009-06-03 05:26 ./slackware64/x/lndir-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:26 ./slackware64/x/lndir-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 244 2010-02-22 20:10 ./slackware64/x/luit-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 28828 2010-02-22 20:10 ./slackware64/x/luit-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:10 ./slackware64/x/luit-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 416 2009-04-20 14:11 ./slackware64/x/m17n-lib-1.5.4-x86_64-1.txt +-rw-r--r-- 1 root root 2163616 2009-04-20 14:11 ./slackware64/x/m17n-lib-1.5.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-04-20 14:11 ./slackware64/x/m17n-lib-1.5.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:01 ./slackware64/x/makedepend-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 23500 2010-02-22 20:01 ./slackware64/x/makedepend-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:01 ./slackware64/x/makedepend-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 23599 2010-04-27 21:56 ./slackware64/x/maketag +-rw-r--r-- 1 root root 23599 2010-04-27 21:56 ./slackware64/x/maketag.ez +-rw-r--r-- 1 root root 335 2010-04-27 20:25 ./slackware64/x/mesa-7.8.1-x86_64-1.txt +-rw-r--r-- 1 root root 3862240 2010-04-27 20:25 ./slackware64/x/mesa-7.8.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 20:25 ./slackware64/x/mesa-7.8.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:10 ./slackware64/x/mkcomposecache-1.2.1-x86_64-1.txt +-rw-r--r-- 1 root root 9244 2010-02-22 20:10 ./slackware64/x/mkcomposecache-1.2.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:10 ./slackware64/x/mkcomposecache-1.2.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 309 2010-02-22 20:10 ./slackware64/x/mkfontdir-1.0.5-noarch-1.txt +-rw-r--r-- 1 root root 8476 2010-02-22 20:10 ./slackware64/x/mkfontdir-1.0.5-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:10 ./slackware64/x/mkfontdir-1.0.5-noarch-1.txz.asc +-rw-r--r-- 1 root root 335 2010-02-22 20:10 ./slackware64/x/mkfontscale-1.0.7-x86_64-1.txt +-rw-r--r-- 1 root root 20944 2010-02-22 20:10 ./slackware64/x/mkfontscale-1.0.7-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:10 ./slackware64/x/mkfontscale-1.0.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2009-06-03 05:38 ./slackware64/x/oclock-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 9056 2009-06-03 05:38 ./slackware64/x/oclock-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/oclock-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 337 2010-02-22 20:09 ./slackware64/x/pixman-0.16.6-x86_64-1.txt +-rw-r--r-- 1 root root 136520 2010-02-22 20:09 ./slackware64/x/pixman-0.16.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:09 ./slackware64/x/pixman-0.16.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2009-06-03 05:25 ./slackware64/x/printproto-1.0.4-noarch-2.txt +-rw-r--r-- 1 root root 8176 2009-06-03 05:25 ./slackware64/x/printproto-1.0.4-noarch-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/printproto-1.0.4-noarch-2.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:00 ./slackware64/x/randrproto-1.3.1-noarch-1.txt +-rw-r--r-- 1 root root 31216 2010-02-22 20:00 ./slackware64/x/randrproto-1.3.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/randrproto-1.3.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 335 2010-02-22 20:00 ./slackware64/x/recordproto-1.14-noarch-1.txt +-rw-r--r-- 1 root root 5704 2010-02-22 20:00 ./slackware64/x/recordproto-1.14-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/recordproto-1.14-noarch-1.txz.asc +-rw-r--r-- 1 root root 335 2009-06-03 05:38 ./slackware64/x/rendercheck-1.3-x86_64-2.txt +-rw-r--r-- 1 root root 18748 2009-06-03 05:38 ./slackware64/x/rendercheck-1.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:38 ./slackware64/x/rendercheck-1.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 335 2009-08-04 00:35 ./slackware64/x/renderproto-0.11-noarch-1.txt +-rw-r--r-- 1 root root 15320 2009-08-04 00:35 ./slackware64/x/renderproto-0.11-noarch-1.txz +-rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/renderproto-0.11-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:00 ./slackware64/x/resourceproto-1.1.0-noarch-1.txt +-rw-r--r-- 1 root root 4236 2010-02-22 20:00 ./slackware64/x/resourceproto-1.1.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/resourceproto-1.1.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 231 2009-06-03 05:39 ./slackware64/x/rgb-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 7676 2009-06-03 05:39 ./slackware64/x/rgb-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/rgb-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2009-08-04 00:52 ./slackware64/x/rstart-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 16596 2009-08-04 00:52 ./slackware64/x/rstart-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-08-04 00:52 ./slackware64/x/rstart-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 403 2008-11-06 16:24 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txt +-rw-r--r-- 1 root root 5974804 2008-11-06 16:24 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txz +-rw-r--r-- 1 root root 197 2008-11-06 16:24 ./slackware64/x/sazanami-fonts-ttf-20040629-noarch-1.txz.asc +-rw-r--r-- 1 root root 330 2009-06-09 00:28 ./slackware64/x/scim-1.4.9-x86_64-4.txt +-rw-r--r-- 1 root root 1055072 2009-06-09 00:28 ./slackware64/x/scim-1.4.9-x86_64-4.txz +-rw-r--r-- 1 root root 197 2009-06-09 00:28 ./slackware64/x/scim-1.4.9-x86_64-4.txz.asc +-rw-r--r-- 1 root root 508 2009-06-10 01:43 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txt +-rw-r--r-- 1 root root 250080 2009-06-10 01:43 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-10 01:43 ./slackware64/x/scim-anthy-1.2.4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 505 2009-06-10 01:46 ./slackware64/x/scim-bridge-0.4.16-x86_64-4.txt +-rw-r--r-- 1 root root 115348 2009-06-10 01:46 ./slackware64/x/scim-bridge-0.4.16-x86_64-4.txz +-rw-r--r-- 1 root root 197 2009-06-10 01:46 ./slackware64/x/scim-bridge-0.4.16-x86_64-4.txz.asc +-rw-r--r-- 1 root root 611 2009-06-10 01:52 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txt +-rw-r--r-- 1 root root 44956 2009-06-10 01:52 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-10 01:52 ./slackware64/x/scim-hangul-0.3.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 356 2009-06-10 01:53 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txt +-rw-r--r-- 1 root root 69624 2009-06-10 01:53 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txz +-rw-r--r-- 1 root root 197 2009-06-10 01:53 ./slackware64/x/scim-input-pad-0.1.2-x86_64-4.txz.asc +-rw-r--r-- 1 root root 402 2009-04-20 14:18 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txt +-rw-r--r-- 1 root root 32356 2009-04-20 14:18 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-04-20 14:18 ./slackware64/x/scim-m17n-0.2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 386 2009-06-10 01:55 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txt +-rw-r--r-- 1 root root 1670432 2009-06-10 01:55 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-10 01:55 ./slackware64/x/scim-pinyin-0.5.91-x86_64-2.txz.asc +-rw-r--r-- 1 root root 289 2009-06-10 01:56 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txt +-rw-r--r-- 1 root root 3977628 2009-06-10 01:56 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txz +-rw-r--r-- 1 root root 197 2009-06-10 01:56 ./slackware64/x/scim-tables-0.5.9-x86_64-3.txz.asc +-rw-r--r-- 1 root root 283 2009-06-03 05:39 ./slackware64/x/scripts-1.0.1-noarch-2.txt +-rw-r--r-- 1 root root 6628 2009-06-03 05:39 ./slackware64/x/scripts-1.0.1-noarch-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/scripts-1.0.1-noarch-2.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:00 ./slackware64/x/scrnsaverproto-1.2.0-noarch-1.txt +-rw-r--r-- 1 root root 5052 2010-02-22 20:00 ./slackware64/x/scrnsaverproto-1.2.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/scrnsaverproto-1.2.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:11 ./slackware64/x/sessreg-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 11724 2010-02-22 20:11 ./slackware64/x/sessreg-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/sessreg-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 309 2009-08-04 00:35 ./slackware64/x/setxkbmap-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 10400 2009-08-04 00:35 ./slackware64/x/setxkbmap-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-08-04 00:35 ./slackware64/x/setxkbmap-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:39 ./slackware64/x/showfont-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 6660 2009-06-03 05:39 ./slackware64/x/showfont-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:39 ./slackware64/x/showfont-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 473 2008-11-06 18:22 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txt +-rw-r--r-- 1 root root 67728 2008-11-06 18:22 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txz +-rw-r--r-- 1 root root 197 2008-11-06 18:22 ./slackware64/x/sinhala_lklug-font-ttf-20060929-noarch-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:11 ./slackware64/x/smproxy-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 13256 2010-02-22 20:11 ./slackware64/x/smproxy-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/smproxy-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 4756 2010-04-27 21:56 ./slackware64/x/tagfile +-rw-r--r-- 1 root root 561 2008-11-06 18:23 ./slackware64/x/tibmachuni-font-ttf-1.901-noarch-1.txt +-rw-r--r-- 1 root root 860064 2008-11-06 18:23 ./slackware64/x/tibmachuni-font-ttf-1.901-noarch-1.txz +-rw-r--r-- 1 root root 197 2008-11-06 18:23 ./slackware64/x/tibmachuni-font-ttf-1.901-noarch-1.txz.asc +-rw-r--r-- 1 root root 309 2009-06-03 05:25 ./slackware64/x/trapproto-3.4.3-noarch-2.txt +-rw-r--r-- 1 root root 12824 2009-06-03 05:25 ./slackware64/x/trapproto-3.4.3-noarch-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/trapproto-3.4.3-noarch-2.txz.asc +-rw-r--r-- 1 root root 621 2008-11-06 18:24 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txt +-rw-r--r-- 1 root root 2183528 2008-11-06 18:24 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txz +-rw-r--r-- 1 root root 197 2008-11-06 18:24 ./slackware64/x/ttf-indic-fonts-0.4.7.4-noarch-1.txz.asc +-rw-r--r-- 1 root root 231 2010-02-22 20:11 ./slackware64/x/twm-1.0.4-x86_64-3.txt +-rw-r--r-- 1 root root 98568 2010-02-22 20:11 ./slackware64/x/twm-1.0.4-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/twm-1.0.4-x86_64-3.txz.asc +-rw-r--r-- 1 root root 335 2010-04-27 20:52 ./slackware64/x/util-macros-1.7.0-noarch-1.txt +-rw-r--r-- 1 root root 23128 2010-04-27 20:52 ./slackware64/x/util-macros-1.7.0-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 20:52 ./slackware64/x/util-macros-1.7.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:00 ./slackware64/x/videoproto-2.3.0-noarch-1.txt +-rw-r--r-- 1 root root 9452 2010-02-22 20:00 ./slackware64/x/videoproto-2.3.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/videoproto-2.3.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:11 ./slackware64/x/viewres-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 22048 2010-02-22 20:11 ./slackware64/x/viewres-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/viewres-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 686 2009-04-20 19:13 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txt +-rw-r--r-- 1 root root 5752036 2009-04-20 19:13 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz +-rw-r--r-- 1 root root 197 2009-04-20 19:13 ./slackware64/x/wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz.asc +-rw-r--r-- 1 root root 607 2009-06-08 20:29 ./slackware64/x/x11-skel-7.4-x86_64-1.txt +-rw-r--r-- 1 root root 12176 2009-06-08 20:29 ./slackware64/x/x11-skel-7.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-08 20:29 ./slackware64/x/x11-skel-7.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:11 ./slackware64/x/x11perf-1.5.1-x86_64-1.txt +-rw-r--r-- 1 root root 60156 2010-02-22 20:11 ./slackware64/x/x11perf-1.5.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/x11perf-1.5.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:11 ./slackware64/x/xauth-1.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 25428 2010-02-22 20:11 ./slackware64/x/xauth-1.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/xauth-1.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 519 2008-11-04 22:19 ./slackware64/x/xaw3d-1.5E-x86_64-1.txt +-rw-r--r-- 1 root root 166100 2008-11-04 22:19 ./slackware64/x/xaw3d-1.5E-x86_64-1.txz +-rw-r--r-- 1 root root 197 2008-11-04 22:19 ./slackware64/x/xaw3d-1.5E-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:11 ./slackware64/x/xbacklight-1.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 7612 2010-02-22 20:11 ./slackware64/x/xbacklight-1.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/xbacklight-1.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:11 ./slackware64/x/xbiff-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 17920 2010-02-22 20:11 ./slackware64/x/xbiff-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/xbiff-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:01 ./slackware64/x/xbitmaps-1.1.0-noarch-1.txt +-rw-r--r-- 1 root root 20784 2010-02-22 20:01 ./slackware64/x/xbitmaps-1.1.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:01 ./slackware64/x/xbitmaps-1.1.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:11 ./slackware64/x/xcalc-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 29876 2010-02-22 20:11 ./slackware64/x/xcalc-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/xcalc-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 309 2010-02-22 20:02 ./slackware64/x/xcb-proto-1.6-noarch-1.txt +-rw-r--r-- 1 root root 51536 2010-02-22 20:02 ./slackware64/x/xcb-proto-1.6-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:02 ./slackware64/x/xcb-proto-1.6-noarch-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:02 ./slackware64/x/xcb-util-0.3.6-x86_64-1.txt +-rw-r--r-- 1 root root 45544 2010-02-22 20:02 ./slackware64/x/xcb-util-0.3.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:02 ./slackware64/x/xcb-util-0.3.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:11 ./slackware64/x/xclipboard-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 19048 2010-02-22 20:11 ./slackware64/x/xclipboard-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/xclipboard-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:11 ./slackware64/x/xclock-1.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 31708 2010-02-22 20:11 ./slackware64/x/xclock-1.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/xclock-1.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 335 2010-02-22 20:00 ./slackware64/x/xcmiscproto-1.2.0-noarch-1.txt +-rw-r--r-- 1 root root 4192 2010-02-22 20:00 ./slackware64/x/xcmiscproto-1.2.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xcmiscproto-1.2.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:11 ./slackware64/x/xcmsdb-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 17004 2010-02-22 20:11 ./slackware64/x/xcmsdb-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/xcmsdb-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:11 ./slackware64/x/xcompmgr-1.1.5-x86_64-1.txt +-rw-r--r-- 1 root root 21896 2010-02-22 20:11 ./slackware64/x/xcompmgr-1.1.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:11 ./slackware64/x/xcompmgr-1.1.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:40 ./slackware64/x/xconsole-1.0.3-x86_64-2.txt +-rw-r--r-- 1 root root 8736 2009-06-03 05:40 ./slackware64/x/xconsole-1.0.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xconsole-1.0.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:01 ./slackware64/x/xcursor-themes-1.0.2-noarch-1.txt +-rw-r--r-- 1 root root 315296 2010-02-22 20:01 ./slackware64/x/xcursor-themes-1.0.2-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:01 ./slackware64/x/xcursor-themes-1.0.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:12 ./slackware64/x/xcursorgen-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 14080 2010-02-22 20:12 ./slackware64/x/xcursorgen-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:12 ./slackware64/x/xcursorgen-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 309 2009-06-03 05:40 ./slackware64/x/xdbedizzy-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 8492 2009-06-03 05:40 ./slackware64/x/xdbedizzy-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xdbedizzy-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 550 2010-05-06 19:28 ./slackware64/x/xdg-utils-1.0.2-noarch-4.txt +-rw-r--r-- 1 root root 46956 2010-05-06 19:28 ./slackware64/x/xdg-utils-1.0.2-noarch-4.txz +-rw-r--r-- 1 root root 198 2010-05-06 19:28 ./slackware64/x/xdg-utils-1.0.2-noarch-4.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:40 ./slackware64/x/xditview-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 21056 2009-06-03 05:40 ./slackware64/x/xditview-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xditview-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 231 2010-04-27 21:02 ./slackware64/x/xdm-1.1.10-x86_64-1.txt +-rw-r--r-- 1 root root 117264 2010-04-27 21:02 ./slackware64/x/xdm-1.1.10-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 21:02 ./slackware64/x/xdm-1.1.10-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:12 ./slackware64/x/xdpyinfo-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 26344 2010-02-22 20:12 ./slackware64/x/xdpyinfo-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:12 ./slackware64/x/xdpyinfo-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:12 ./slackware64/x/xdriinfo-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 10572 2010-02-22 20:12 ./slackware64/x/xdriinfo-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:12 ./slackware64/x/xdriinfo-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2009-06-03 05:40 ./slackware64/x/xedit-1.1.2-x86_64-1.txt +-rw-r--r-- 1 root root 282684 2009-06-03 05:40 ./slackware64/x/xedit-1.1.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:40 ./slackware64/x/xedit-1.1.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 231 2010-02-22 20:12 ./slackware64/x/xev-1.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 14548 2010-02-22 20:12 ./slackware64/x/xev-1.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:12 ./slackware64/x/xev-1.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 309 2010-02-22 20:00 ./slackware64/x/xextproto-7.1.1-noarch-1.txt +-rw-r--r-- 1 root root 24472 2010-02-22 20:00 ./slackware64/x/xextproto-7.1.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xextproto-7.1.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:12 ./slackware64/x/xeyes-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 13956 2010-02-22 20:12 ./slackware64/x/xeyes-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:12 ./slackware64/x/xeyes-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:15 ./slackware64/x/xf86-input-acecad-1.4.0-x86_64-1.txt +-rw-r--r-- 1 root root 18124 2010-02-22 20:15 ./slackware64/x/xf86-input-acecad-1.4.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:15 ./slackware64/x/xf86-input-acecad-1.4.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:16 ./slackware64/x/xf86-input-aiptek-1.3.0-x86_64-1.txt +-rw-r--r-- 1 root root 19348 2010-02-22 20:16 ./slackware64/x/xf86-input-aiptek-1.3.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:16 ./slackware64/x/xf86-input-aiptek-1.3.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-04-27 20:58 ./slackware64/x/xf86-input-evdev-2.3.3-x86_64-1.txt +-rw-r--r-- 1 root root 32984 2010-04-27 20:58 ./slackware64/x/xf86-input-evdev-2.3.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 20:58 ./slackware64/x/xf86-input-evdev-2.3.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 439 2010-02-22 20:17 ./slackware64/x/xf86-input-joystick-1.4.99.2-x86_64-1.txt +-rw-r--r-- 1 root root 33156 2010-02-22 20:17 ./slackware64/x/xf86-input-joystick-1.4.99.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:17 ./slackware64/x/xf86-input-joystick-1.4.99.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 439 2010-02-22 20:17 ./slackware64/x/xf86-input-keyboard-1.4.0-x86_64-1.txt +-rw-r--r-- 1 root root 24064 2010-02-22 20:17 ./slackware64/x/xf86-input-keyboard-1.4.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:17 ./slackware64/x/xf86-input-keyboard-1.4.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:17 ./slackware64/x/xf86-input-mouse-1.5.0-x86_64-1.txt +-rw-r--r-- 1 root root 49512 2010-02-22 20:17 ./slackware64/x/xf86-input-mouse-1.5.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:17 ./slackware64/x/xf86-input-mouse-1.5.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 439 2010-03-06 06:16 ./slackware64/x/xf86-input-penmount-1.4.1-x86_64-1.txt +-rw-r--r-- 1 root root 12824 2010-03-06 06:16 ./slackware64/x/xf86-input-penmount-1.4.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-06 06:16 ./slackware64/x/xf86-input-penmount-1.4.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 452 2010-04-24 18:02 ./slackware64/x/xf86-input-synaptics-1.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 48688 2010-04-24 18:02 ./slackware64/x/xf86-input-synaptics-1.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-24 18:02 ./slackware64/x/xf86-input-synaptics-1.2.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 426 2010-05-02 00:52 ./slackware64/x/xf86-input-vmmouse-12.6.9-x86_64-2.txt +-rw-r--r-- 1 root root 22632 2010-05-02 00:52 ./slackware64/x/xf86-input-vmmouse-12.6.9-x86_64-2.txz +-rw-r--r-- 1 root root 198 2010-05-02 00:52 ./slackware64/x/xf86-input-vmmouse-12.6.9-x86_64-2.txz.asc +-rw-r--r-- 1 root root 387 2010-02-22 20:18 ./slackware64/x/xf86-input-void-1.3.0-x86_64-1.txt +-rw-r--r-- 1 root root 10148 2010-02-22 20:18 ./slackware64/x/xf86-input-void-1.3.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:18 ./slackware64/x/xf86-input-void-1.3.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-04-27 20:59 ./slackware64/x/xf86-input-wacom-0.10.5-x86_64-1.txt +-rw-r--r-- 1 root root 59752 2010-04-27 20:59 ./slackware64/x/xf86-input-wacom-0.10.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 20:59 ./slackware64/x/xf86-input-wacom-0.10.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:18 ./slackware64/x/xf86-video-apm-1.2.2-x86_64-2.txt +-rw-r--r-- 1 root root 55460 2010-02-22 20:18 ./slackware64/x/xf86-video-apm-1.2.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:18 ./slackware64/x/xf86-video-apm-1.2.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:18 ./slackware64/x/xf86-video-ark-0.7.2-x86_64-1.txt +-rw-r--r-- 1 root root 9764 2010-02-22 20:18 ./slackware64/x/xf86-video-ark-0.7.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:18 ./slackware64/x/xf86-video-ark-0.7.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:18 ./slackware64/x/xf86-video-ast-0.89.9-x86_64-2.txt +-rw-r--r-- 1 root root 22344 2010-02-22 20:18 ./slackware64/x/xf86-video-ast-0.89.9-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:18 ./slackware64/x/xf86-video-ast-0.89.9-x86_64-2.txz.asc +-rw-r--r-- 1 root root 374 2010-04-27 21:00 ./slackware64/x/xf86-video-ati-6.13.0-x86_64-1.txt +-rw-r--r-- 1 root root 339860 2010-04-27 21:00 ./slackware64/x/xf86-video-ati-6.13.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 21:00 ./slackware64/x/xf86-video-ati-6.13.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:19 ./slackware64/x/xf86-video-chips-1.2.2-x86_64-1.txt +-rw-r--r-- 1 root root 79204 2010-02-22 20:19 ./slackware64/x/xf86-video-chips-1.2.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:19 ./slackware64/x/xf86-video-chips-1.2.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:19 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-2.txt +-rw-r--r-- 1 root root 35976 2010-02-22 20:19 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:19 ./slackware64/x/xf86-video-cirrus-1.3.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:19 ./slackware64/x/xf86-video-dummy-0.3.3-x86_64-1.txt +-rw-r--r-- 1 root root 12128 2010-02-22 20:19 ./slackware64/x/xf86-video-dummy-0.3.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:19 ./slackware64/x/xf86-video-dummy-0.3.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:20 ./slackware64/x/xf86-video-glint-1.2.4-x86_64-2.txt +-rw-r--r-- 1 root root 77012 2010-02-22 20:20 ./slackware64/x/xf86-video-glint-1.2.4-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:20 ./slackware64/x/xf86-video-glint-1.2.4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 387 2010-02-22 20:20 ./slackware64/x/xf86-video-i128-1.3.3-x86_64-2.txt +-rw-r--r-- 1 root root 24116 2010-02-22 20:20 ./slackware64/x/xf86-video-i128-1.3.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:20 ./slackware64/x/xf86-video-i128-1.3.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 387 2010-02-22 20:20 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-2.txt +-rw-r--r-- 1 root root 24380 2010-02-22 20:20 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:20 ./slackware64/x/xf86-video-i740-1.3.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 400 2010-04-27 21:01 ./slackware64/x/xf86-video-intel-2.11.0-x86_64-1.txt +-rw-r--r-- 1 root root 181460 2010-04-27 21:01 ./slackware64/x/xf86-video-intel-2.11.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 21:01 ./slackware64/x/xf86-video-intel-2.11.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:21 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-2.txt +-rw-r--r-- 1 root root 94504 2010-02-22 20:21 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:21 ./slackware64/x/xf86-video-mach64-6.8.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:21 ./slackware64/x/xf86-video-mga-1.4.11-x86_64-2.txt +-rw-r--r-- 1 root root 87576 2010-02-22 20:21 ./slackware64/x/xf86-video-mga-1.4.11-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:21 ./slackware64/x/xf86-video-mga-1.4.11-x86_64-2.txz.asc +-rw-r--r-- 1 root root 439 2010-02-22 20:21 ./slackware64/x/xf86-video-neomagic-1.2.4-x86_64-2.txt +-rw-r--r-- 1 root root 32852 2010-02-22 20:21 ./slackware64/x/xf86-video-neomagic-1.2.4-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:21 ./slackware64/x/xf86-video-neomagic-1.2.4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 645 2010-04-27 21:47 ./slackware64/x/xf86-video-nouveau-blacklist-noarch-1.txt +-rw-r--r-- 1 root root 880 2010-04-27 21:47 ./slackware64/x/xf86-video-nouveau-blacklist-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 21:47 ./slackware64/x/xf86-video-nouveau-blacklist-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2010-03-18 21:53 ./slackware64/x/xf86-video-nv-2.1.17-x86_64-1.txt +-rw-r--r-- 1 root root 85684 2010-03-18 21:53 ./slackware64/x/xf86-video-nv-2.1.17-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-18 21:53 ./slackware64/x/xf86-video-nv-2.1.17-x86_64-1.txz.asc +-rw-r--r-- 1 root root 465 2010-02-22 20:22 ./slackware64/x/xf86-video-openchrome-0.2.904-x86_64-1.txt +-rw-r--r-- 1 root root 138452 2010-02-22 20:22 ./slackware64/x/xf86-video-openchrome-0.2.904-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:22 ./slackware64/x/xf86-video-openchrome-0.2.904-x86_64-1.txz.asc +-rw-r--r-- 1 root root 387 2010-02-22 20:22 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-2.txt +-rw-r--r-- 1 root root 55604 2010-02-22 20:22 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:22 ./slackware64/x/xf86-video-r128-6.8.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 485 2010-02-22 20:22 ./slackware64/x/xf86-video-radeonhd-1.3.0-x86_64-1.txt +-rw-r--r-- 1 root root 201316 2010-02-22 20:22 ./slackware64/x/xf86-video-radeonhd-1.3.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:22 ./slackware64/x/xf86-video-radeonhd-1.3.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 452 2010-02-22 20:22 ./slackware64/x/xf86-video-rendition-4.2.3-x86_64-1.txt +-rw-r--r-- 1 root root 43980 2010-02-22 20:22 ./slackware64/x/xf86-video-rendition-4.2.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:22 ./slackware64/x/xf86-video-rendition-4.2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:22 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-2.txt +-rw-r--r-- 1 root root 30880 2010-02-22 20:22 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:22 ./slackware64/x/xf86-video-s3-0.6.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 426 2010-02-22 20:22 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-2.txt +-rw-r--r-- 1 root root 41328 2010-02-22 20:22 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:22 ./slackware64/x/xf86-video-s3virge-1.10.4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:23 ./slackware64/x/xf86-video-savage-2.3.1-x86_64-2.txt +-rw-r--r-- 1 root root 61468 2010-02-22 20:23 ./slackware64/x/xf86-video-savage-2.3.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:23 ./slackware64/x/xf86-video-savage-2.3.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 504 2010-05-10 08:11 ./slackware64/x/xf86-video-siliconmotion-1.7.4-x86_64-1.txt +-rw-r--r-- 1 root root 65448 2010-05-10 08:11 ./slackware64/x/xf86-video-siliconmotion-1.7.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-10 08:11 ./slackware64/x/xf86-video-siliconmotion-1.7.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:23 ./slackware64/x/xf86-video-sis-0.10.2-x86_64-2.txt +-rw-r--r-- 1 root root 234180 2010-02-22 20:23 ./slackware64/x/xf86-video-sis-0.10.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:23 ./slackware64/x/xf86-video-sis-0.10.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:23 ./slackware64/x/xf86-video-sisusb-0.9.3-x86_64-2.txt +-rw-r--r-- 1 root root 34996 2010-02-22 20:23 ./slackware64/x/xf86-video-sisusb-0.9.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:23 ./slackware64/x/xf86-video-sisusb-0.9.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 387 2010-02-22 20:23 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-2.txt +-rw-r--r-- 1 root root 31144 2010-02-22 20:23 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:23 ./slackware64/x/xf86-video-tdfx-1.4.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:23 ./slackware64/x/xf86-video-tga-1.2.1-x86_64-1.txt +-rw-r--r-- 1 root root 23720 2010-02-22 20:23 ./slackware64/x/xf86-video-tga-1.2.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:23 ./slackware64/x/xf86-video-tga-1.2.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 426 2010-02-22 20:23 ./slackware64/x/xf86-video-trident-1.3.3-x86_64-1.txt +-rw-r--r-- 1 root root 60292 2010-02-22 20:23 ./slackware64/x/xf86-video-trident-1.3.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:23 ./slackware64/x/xf86-video-trident-1.3.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:24 ./slackware64/x/xf86-video-tseng-1.2.3-x86_64-1.txt +-rw-r--r-- 1 root root 24984 2010-02-22 20:24 ./slackware64/x/xf86-video-tseng-1.2.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:24 ./slackware64/x/xf86-video-tseng-1.2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:24 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-3.txt +-rw-r--r-- 1 root root 10052 2010-02-22 20:24 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:24 ./slackware64/x/xf86-video-v4l-0.2.0-x86_64-3.txz.asc +-rw-r--r-- 1 root root 387 2010-02-22 20:24 ./slackware64/x/xf86-video-vesa-2.3.0-x86_64-2.txt +-rw-r--r-- 1 root root 25556 2010-02-22 20:24 ./slackware64/x/xf86-video-vesa-2.3.0-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:24 ./slackware64/x/xf86-video-vesa-2.3.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:24 ./slackware64/x/xf86-video-vmware-10.16.9-x86_64-2.txt +-rw-r--r-- 1 root root 33008 2010-02-22 20:24 ./slackware64/x/xf86-video-vmware-10.16.9-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:24 ./slackware64/x/xf86-video-vmware-10.16.9-x86_64-2.txz.asc +-rw-r--r-- 1 root root 413 2010-02-22 20:24 ./slackware64/x/xf86-video-voodoo-1.2.3-x86_64-2.txt +-rw-r--r-- 1 root root 15376 2010-02-22 20:24 ./slackware64/x/xf86-video-voodoo-1.2.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:24 ./slackware64/x/xf86-video-voodoo-1.2.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 374 2010-02-22 20:24 ./slackware64/x/xf86-video-xgi-1.5.1-x86_64-1.txt +-rw-r--r-- 1 root root 103952 2010-02-22 20:24 ./slackware64/x/xf86-video-xgi-1.5.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:24 ./slackware64/x/xf86-video-xgi-1.5.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:00 ./slackware64/x/xf86bigfontproto-1.2.0-noarch-1.txt +-rw-r--r-- 1 root root 4792 2010-02-22 20:00 ./slackware64/x/xf86bigfontproto-1.2.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xf86bigfontproto-1.2.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 283 2009-06-03 05:41 ./slackware64/x/xf86dga-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 4784 2009-06-03 05:41 ./slackware64/x/xf86dga-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xf86dga-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 348 2010-02-22 20:00 ./slackware64/x/xf86dgaproto-2.1-noarch-1.txt +-rw-r--r-- 1 root root 7428 2010-02-22 20:00 ./slackware64/x/xf86dgaproto-2.1-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xf86dgaproto-2.1-noarch-1.txz.asc +-rw-r--r-- 1 root root 348 2010-02-22 20:00 ./slackware64/x/xf86driproto-2.1.0-noarch-1.txt +-rw-r--r-- 1 root root 5548 2010-02-22 20:00 ./slackware64/x/xf86driproto-2.1.0-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xf86driproto-2.1.0-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:00 ./slackware64/x/xf86miscproto-0.9.3-noarch-1.txt +-rw-r--r-- 1 root root 6148 2010-02-22 20:00 ./slackware64/x/xf86miscproto-0.9.3-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xf86miscproto-0.9.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 361 2009-06-03 05:25 ./slackware64/x/xf86rushproto-1.1.2-noarch-2.txt +-rw-r--r-- 1 root root 2148 2009-06-03 05:25 ./slackware64/x/xf86rushproto-1.1.2-noarch-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:25 ./slackware64/x/xf86rushproto-1.1.2-noarch-2.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:00 ./slackware64/x/xf86vidmodeproto-2.3-noarch-1.txt +-rw-r--r-- 1 root root 5884 2010-02-22 20:00 ./slackware64/x/xf86vidmodeproto-2.3-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xf86vidmodeproto-2.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 231 2009-06-03 05:41 ./slackware64/x/xfd-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 14136 2009-06-03 05:41 ./slackware64/x/xfd-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfd-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 322 2009-06-03 05:41 ./slackware64/x/xfindproxy-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 7372 2009-06-03 05:41 ./slackware64/x/xfindproxy-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfindproxy-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:41 ./slackware64/x/xfontsel-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 21676 2009-06-03 05:41 ./slackware64/x/xfontsel-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfontsel-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 231 2009-08-04 00:38 ./slackware64/x/xfs-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 55536 2009-08-04 00:38 ./slackware64/x/xfs-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-08-04 00:38 ./slackware64/x/xfs-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2009-06-03 05:41 ./slackware64/x/xfsinfo-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 4592 2009-06-03 05:41 ./slackware64/x/xfsinfo-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfsinfo-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 244 2009-06-03 05:41 ./slackware64/x/xfwp-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 21568 2009-06-03 05:41 ./slackware64/x/xfwp-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:41 ./slackware64/x/xfwp-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:13 ./slackware64/x/xgamma-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 9720 2010-02-22 20:13 ./slackware64/x/xgamma-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xgamma-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 231 2010-02-22 20:13 ./slackware64/x/xgc-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 33236 2010-02-22 20:13 ./slackware64/x/xgc-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xgc-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:13 ./slackware64/x/xhost-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 13376 2010-02-22 20:13 ./slackware64/x/xhost-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xhost-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:00 ./slackware64/x/xineramaproto-1.2-noarch-1.txt +-rw-r--r-- 1 root root 5284 2010-02-22 20:00 ./slackware64/x/xineramaproto-1.2-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xineramaproto-1.2-noarch-1.txz.asc +-rw-r--r-- 1 root root 257 2010-03-18 21:49 ./slackware64/x/xinit-1.2.1-x86_64-1.txt +-rw-r--r-- 1 root root 30100 2010-03-18 21:49 ./slackware64/x/xinit-1.2.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-18 21:49 ./slackware64/x/xinit-1.2.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 468 2010-03-18 21:49 ./slackware64/x/xinput-1.5.1-x86_64-1.txt +-rw-r--r-- 1 root root 29648 2010-03-18 21:49 ./slackware64/x/xinput-1.5.1-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-18 21:49 ./slackware64/x/xinput-1.5.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:13 ./slackware64/x/xkbcomp-1.1.1-x86_64-1.txt +-rw-r--r-- 1 root root 97124 2010-02-22 20:13 ./slackware64/x/xkbcomp-1.1.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xkbcomp-1.1.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:13 ./slackware64/x/xkbevd-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 21060 2010-02-22 20:13 ./slackware64/x/xkbevd-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xkbevd-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:13 ./slackware64/x/xkbprint-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 46224 2010-02-22 20:13 ./slackware64/x/xkbprint-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xkbprint-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:13 ./slackware64/x/xkbutils-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 20520 2010-02-22 20:13 ./slackware64/x/xkbutils-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xkbutils-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 400 2010-02-22 20:01 ./slackware64/x/xkeyboard-config-1.8-noarch-1.txt +-rw-r--r-- 1 root root 421464 2010-02-22 20:01 ./slackware64/x/xkeyboard-config-1.8-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:01 ./slackware64/x/xkeyboard-config-1.8-noarch-1.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:13 ./slackware64/x/xkill-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 11460 2010-02-22 20:13 ./slackware64/x/xkill-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xkill-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2009-06-03 05:42 ./slackware64/x/xload-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 7856 2009-06-03 05:42 ./slackware64/x/xload-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xload-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:13 ./slackware64/x/xlogo-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 19908 2010-02-22 20:13 ./slackware64/x/xlogo-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xlogo-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:13 ./slackware64/x/xlsatoms-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 8684 2010-02-22 20:13 ./slackware64/x/xlsatoms-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xlsatoms-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 322 2010-02-22 20:13 ./slackware64/x/xlsclients-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 9412 2010-02-22 20:13 ./slackware64/x/xlsclients-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xlsclients-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:42 ./slackware64/x/xlsfonts-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 11372 2009-06-03 05:42 ./slackware64/x/xlsfonts-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xlsfonts-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 244 2010-02-22 20:13 ./slackware64/x/xmag-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 20976 2010-02-22 20:13 ./slackware64/x/xmag-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:13 ./slackware64/x/xmag-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 244 2010-02-22 20:14 ./slackware64/x/xman-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 41132 2010-02-22 20:14 ./slackware64/x/xman-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xman-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:14 ./slackware64/x/xmessage-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 19764 2010-02-22 20:14 ./slackware64/x/xmessage-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xmessage-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 231 2009-06-03 05:42 ./slackware64/x/xmh-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 71004 2009-06-03 05:42 ./slackware64/x/xmh-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xmh-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 283 2010-02-22 20:14 ./slackware64/x/xmodmap-1.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 27592 2010-02-22 20:14 ./slackware64/x/xmodmap-1.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xmodmap-1.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 257 2009-06-03 05:42 ./slackware64/x/xmore-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 4936 2009-06-03 05:42 ./slackware64/x/xmore-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xmore-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 361 2010-02-22 20:01 ./slackware64/x/xorg-cf-files-1.0.3-noarch-1.txt +-rw-r--r-- 1 root root 181092 2010-02-22 20:01 ./slackware64/x/xorg-cf-files-1.0.3-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:01 ./slackware64/x/xorg-cf-files-1.0.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 309 2010-02-22 20:15 ./slackware64/x/xorg-docs-1.5-noarch-1.txt +-rw-r--r-- 1 root root 216004 2010-02-22 20:15 ./slackware64/x/xorg-docs-1.5-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:15 ./slackware64/x/xorg-docs-1.5-noarch-1.txz.asc +-rw-r--r-- 1 root root 698 2010-05-05 07:01 ./slackware64/x/xorg-server-1.7.7-x86_64-1.txt +-rw-r--r-- 1 root root 1917500 2010-05-05 07:01 ./slackware64/x/xorg-server-1.7.7-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 07:01 ./slackware64/x/xorg-server-1.7.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 370 2010-05-05 07:01 ./slackware64/x/xorg-server-xephyr-1.7.7-x86_64-1.txt +-rw-r--r-- 1 root root 699440 2010-05-05 07:01 ./slackware64/x/xorg-server-xephyr-1.7.7-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 07:01 ./slackware64/x/xorg-server-xephyr-1.7.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 595 2010-05-05 07:01 ./slackware64/x/xorg-server-xnest-1.7.7-x86_64-1.txt +-rw-r--r-- 1 root root 539280 2010-05-05 07:01 ./slackware64/x/xorg-server-xnest-1.7.7-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 07:01 ./slackware64/x/xorg-server-xnest-1.7.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 693 2010-05-05 07:01 ./slackware64/x/xorg-server-xvfb-1.7.7-x86_64-1.txt +-rw-r--r-- 1 root root 628092 2010-05-05 07:01 ./slackware64/x/xorg-server-xvfb-1.7.7-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-05 07:01 ./slackware64/x/xorg-server-xvfb-1.7.7-x86_64-1.txz.asc +-rw-r--r-- 1 root root 426 2010-04-27 20:53 ./slackware64/x/xorg-sgml-doctools-1.4-noarch-1.txt +-rw-r--r-- 1 root root 9100 2010-04-27 20:53 ./slackware64/x/xorg-sgml-doctools-1.4-noarch-1.txz +-rw-r--r-- 1 root root 198 2010-04-27 20:53 ./slackware64/x/xorg-sgml-doctools-1.4-noarch-1.txz.asc +-rw-r--r-- 1 root root 348 2009-06-03 05:42 ./slackware64/x/xplsprinters-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 5424 2009-06-03 05:42 ./slackware64/x/xplsprinters-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xplsprinters-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 231 2010-02-22 20:14 ./slackware64/x/xpr-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 33188 2010-02-22 20:14 ./slackware64/x/xpr-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xpr-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 439 2009-06-03 05:42 ./slackware64/x/xprehashprinterlist-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 3848 2009-06-03 05:42 ./slackware64/x/xprehashprinterlist-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:42 ./slackware64/x/xprehashprinterlist-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 257 2010-02-22 20:14 ./slackware64/x/xprop-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 26740 2010-02-22 20:14 ./slackware64/x/xprop-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xprop-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:00 ./slackware64/x/xproto-7.0.16-noarch-1.txt +-rw-r--r-- 1 root root 68844 2010-02-22 20:00 ./slackware64/x/xproto-7.0.16-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:00 ./slackware64/x/xproto-7.0.16-noarch-1.txz.asc +-rw-r--r-- 1 root root 504 2010-02-22 20:01 ./slackware64/x/xproxymanagementprotocol-1.0.3-noarch-1.txt +-rw-r--r-- 1 root root 5384 2010-02-22 20:01 ./slackware64/x/xproxymanagementprotocol-1.0.3-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:01 ./slackware64/x/xproxymanagementprotocol-1.0.3-noarch-1.txz.asc +-rw-r--r-- 1 root root 244 2010-02-22 20:02 ./slackware64/x/xpyb-1.2-x86_64-1.txt +-rw-r--r-- 1 root root 109120 2010-02-22 20:02 ./slackware64/x/xpyb-1.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:02 ./slackware64/x/xpyb-1.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:14 ./slackware64/x/xrandr-1.3.2-x86_64-1.txt +-rw-r--r-- 1 root root 41344 2010-02-22 20:14 ./slackware64/x/xrandr-1.3.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xrandr-1.3.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 244 2010-02-22 20:14 ./slackware64/x/xrdb-1.0.6-x86_64-1.txt +-rw-r--r-- 1 root root 20984 2010-02-22 20:14 ./slackware64/x/xrdb-1.0.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xrdb-1.0.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:14 ./slackware64/x/xrefresh-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 9832 2010-02-22 20:14 ./slackware64/x/xrefresh-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xrefresh-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:14 ./slackware64/x/xscope-1.2-x86_64-1.txt +-rw-r--r-- 1 root root 92964 2010-02-22 20:14 ./slackware64/x/xscope-1.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xscope-1.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 244 2010-02-22 20:14 ./slackware64/x/xset-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 25348 2010-02-22 20:14 ./slackware64/x/xset-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xset-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:43 ./slackware64/x/xsetmode-1.0.0-x86_64-2.txt +-rw-r--r-- 1 root root 3428 2009-06-03 05:43 ./slackware64/x/xsetmode-1.0.0-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xsetmode-1.0.0-x86_64-2.txz.asc +-rw-r--r-- 1 root root 335 2009-06-03 05:43 ./slackware64/x/xsetpointer-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 3908 2009-06-03 05:43 ./slackware64/x/xsetpointer-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xsetpointer-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:14 ./slackware64/x/xsetroot-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 15556 2010-02-22 20:14 ./slackware64/x/xsetroot-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:14 ./slackware64/x/xsetroot-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 231 2009-06-03 05:43 ./slackware64/x/xsm-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 41896 2009-06-03 05:43 ./slackware64/x/xsm-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xsm-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 296 2009-06-03 05:43 ./slackware64/x/xstdcmap-1.0.1-x86_64-2.txt +-rw-r--r-- 1 root root 6512 2009-06-03 05:43 ./slackware64/x/xstdcmap-1.0.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xstdcmap-1.0.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 308 2010-05-06 07:57 ./slackware64/x/xterm-258-x86_64-1.txt +-rw-r--r-- 1 root root 235540 2010-05-06 07:57 ./slackware64/x/xterm-258-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-06 07:57 ./slackware64/x/xterm-258-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:09 ./slackware64/x/xtrans-1.2.5-noarch-1.txt +-rw-r--r-- 1 root root 54176 2010-02-22 20:09 ./slackware64/x/xtrans-1.2.5-noarch-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:09 ./slackware64/x/xtrans-1.2.5-noarch-1.txz.asc +-rw-r--r-- 1 root root 257 2009-06-03 05:43 ./slackware64/x/xtrap-1.0.2-x86_64-2.txt +-rw-r--r-- 1 root root 16856 2009-06-03 05:43 ./slackware64/x/xtrap-1.0.2-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-03 05:43 ./slackware64/x/xtrap-1.0.2-x86_64-2.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:15 ./slackware64/x/xvidtune-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 26252 2010-02-22 20:15 ./slackware64/x/xvidtune-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:15 ./slackware64/x/xvidtune-1.0.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 270 2010-02-22 20:15 ./slackware64/x/xvinfo-1.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 9636 2010-02-22 20:15 ./slackware64/x/xvinfo-1.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:15 ./slackware64/x/xvinfo-1.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 231 2010-02-22 20:15 ./slackware64/x/xwd-1.0.3-x86_64-1.txt +-rw-r--r-- 1 root root 19088 2010-02-22 20:15 ./slackware64/x/xwd-1.0.3-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:15 ./slackware64/x/xwd-1.0.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 296 2010-02-22 20:15 ./slackware64/x/xwininfo-1.0.5-x86_64-1.txt +-rw-r--r-- 1 root root 20464 2010-02-22 20:15 ./slackware64/x/xwininfo-1.0.5-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:15 ./slackware64/x/xwininfo-1.0.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 244 2010-02-22 20:15 ./slackware64/x/xwud-1.0.2-x86_64-1.txt +-rw-r--r-- 1 root root 17092 2010-02-22 20:15 ./slackware64/x/xwud-1.0.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-22 20:15 ./slackware64/x/xwud-1.0.2-x86_64-1.txz.asc +drwxr-xr-x 2 root root 12288 2010-05-18 18:58 ./slackware64/xap +-rw-r--r-- 1 root root 479 2010-02-19 07:06 ./slackware64/xap/MPlayer-20100218-x86_64-1.txt +-rw-r--r-- 1 root root 8703252 2010-02-19 07:06 ./slackware64/xap/MPlayer-20100218-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-19 07:06 ./slackware64/xap/MPlayer-20100218-x86_64-1.txz.asc +-rw-r--r-- 1 root root 615 2010-04-26 00:34 ./slackware64/xap/audacious-2.3-x86_64-1.txt +-rw-r--r-- 1 root root 466092 2010-04-26 00:34 ./slackware64/xap/audacious-2.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-26 00:34 ./slackware64/xap/audacious-2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 424 2010-04-26 00:45 ./slackware64/xap/audacious-plugins-2.3-x86_64-1.txt +-rw-r--r-- 1 root root 1350388 2010-04-26 00:45 ./slackware64/xap/audacious-plugins-2.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-26 00:45 ./slackware64/xap/audacious-plugins-2.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 441 2010-02-08 00:06 ./slackware64/xap/blackbox-0.70.1-x86_64-3.txt +-rw-r--r-- 1 root root 297156 2010-02-08 00:06 ./slackware64/xap/blackbox-0.70.1-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-08 00:06 ./slackware64/xap/blackbox-0.70.1-x86_64-3.txz.asc +-rw-r--r-- 1 root root 424 2010-05-02 21:48 ./slackware64/xap/blueman-1.21-x86_64-1.txt +-rw-r--r-- 1 root root 467364 2010-05-02 21:48 ./slackware64/xap/blueman-1.21-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-02 21:48 ./slackware64/xap/blueman-1.21-x86_64-1.txz.asc +-rw-r--r-- 1 root root 652 2010-02-19 18:41 ./slackware64/xap/electricsheep-20090306-x86_64-3.txt +-rw-r--r-- 1 root root 2598696 2010-02-19 18:41 ./slackware64/xap/electricsheep-20090306-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-19 18:41 ./slackware64/xap/electricsheep-20090306-x86_64-3.txz.asc +-rw-r--r-- 1 root root 229 2010-02-11 21:29 ./slackware64/xap/fluxbox-1.1.1-x86_64-2.txt +-rw-r--r-- 1 root root 696160 2010-02-11 21:29 ./slackware64/xap/fluxbox-1.1.1-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-11 21:29 ./slackware64/xap/fluxbox-1.1.1-x86_64-2.txz.asc +-rw-r--r-- 1 root root 337 2008-10-25 22:52 ./slackware64/xap/fvwm-2.4.20-x86_64-1.txt +-rw-r--r-- 1 root root 1000700 2008-10-25 22:52 ./slackware64/xap/fvwm-2.4.20-x86_64-1.txz +-rw-r--r-- 1 root root 197 2008-10-25 22:52 ./slackware64/xap/fvwm-2.4.20-x86_64-1.txz.asc +-rw-r--r-- 1 root root 319 2010-03-11 23:26 ./slackware64/xap/geeqie-1.0-x86_64-1.txt +-rw-r--r-- 1 root root 718700 2010-03-11 23:26 ./slackware64/xap/geeqie-1.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-11 23:26 ./slackware64/xap/geeqie-1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 444 2009-05-23 04:36 ./slackware64/xap/gftp-2.0.19-x86_64-2.txt +-rw-r--r-- 1 root root 589988 2009-05-23 04:36 ./slackware64/xap/gftp-2.0.19-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-05-23 04:36 ./slackware64/xap/gftp-2.0.19-x86_64-2.txz.asc +-rw-r--r-- 1 root root 473 2010-02-16 05:01 ./slackware64/xap/gimp-2.6.8-x86_64-2.txt +-rw-r--r-- 1 root root 9907780 2010-02-16 05:01 ./slackware64/xap/gimp-2.6.8-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-16 05:01 ./slackware64/xap/gimp-2.6.8-x86_64-2.txz.asc +-rw-r--r-- 1 root root 513 2010-03-31 04:46 ./slackware64/xap/gkrellm-2.3.4-x86_64-1.txt +-rw-r--r-- 1 root root 524820 2010-03-31 04:46 ./slackware64/xap/gkrellm-2.3.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-31 04:46 ./slackware64/xap/gkrellm-2.3.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 337 2010-02-20 04:13 ./slackware64/xap/gnuchess-5.07-x86_64-5.txt +-rw-r--r-- 1 root root 1002124 2010-02-20 04:13 ./slackware64/xap/gnuchess-5.07-x86_64-5.txz +-rw-r--r-- 1 root root 197 2010-02-20 04:13 ./slackware64/xap/gnuchess-5.07-x86_64-5.txz.asc +-rw-r--r-- 1 root root 647 2010-02-20 02:17 ./slackware64/xap/gnuplot-4.2.6-x86_64-1.txt +-rw-r--r-- 1 root root 1056736 2010-02-20 02:17 ./slackware64/xap/gnuplot-4.2.6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-20 02:17 ./slackware64/xap/gnuplot-4.2.6-x86_64-1.txz.asc +-rw-r--r-- 1 root root 209 2010-02-16 04:12 ./slackware64/xap/gucharmap-2.28.2-x86_64-1.txt +-rw-r--r-- 1 root root 1984852 2010-02-16 04:12 ./slackware64/xap/gucharmap-2.28.2-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-16 04:12 ./slackware64/xap/gucharmap-2.28.2-x86_64-1.txz.asc +-rw-r--r-- 1 root root 370 2010-05-09 20:01 ./slackware64/xap/gv-3.6.9-x86_64-1.txt +-rw-r--r-- 1 root root 197412 2010-05-09 20:01 ./slackware64/xap/gv-3.6.9-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-09 20:01 ./slackware64/xap/gv-3.6.9-x86_64-1.txz.asc +-rw-r--r-- 1 root root 336 2009-06-10 01:22 ./slackware64/xap/gxine-0.5.903-x86_64-2.txt +-rw-r--r-- 1 root root 366732 2009-06-10 01:22 ./slackware64/xap/gxine-0.5.903-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-06-10 01:22 ./slackware64/xap/gxine-0.5.903-x86_64-2.txz.asc +-rw-r--r-- 1 root root 540 2010-02-17 21:16 ./slackware64/xap/imagemagick-6.5.9_6-x86_64-1.txt +-rw-r--r-- 1 root root 4569860 2010-02-17 21:16 ./slackware64/xap/imagemagick-6.5.9_6-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-17 21:16 ./slackware64/xap/imagemagick-6.5.9_6-x86_64-1.txz.asc +-rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/xap/install-packages +-rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/xap/install.end +-rw-r--r-- 1 root root 4211 2010-05-02 08:24 ./slackware64/xap/maketag +-rw-r--r-- 1 root root 4211 2010-05-02 08:24 ./slackware64/xap/maketag.ez +-rw-r--r-- 1 root root 527 2010-04-02 20:38 ./slackware64/xap/mozilla-firefox-3.6.3-x86_64-1.txt +-rw-r--r-- 1 root root 9151488 2010-04-02 20:38 ./slackware64/xap/mozilla-firefox-3.6.3-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-02 20:38 ./slackware64/xap/mozilla-firefox-3.6.3-x86_64-1.txz.asc +-rw-r--r-- 1 root root 702 2010-04-02 02:10 ./slackware64/xap/mozilla-thunderbird-3.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 9601492 2010-04-02 02:10 ./slackware64/xap/mozilla-thunderbird-3.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-02 02:10 ./slackware64/xap/mozilla-thunderbird-3.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 267 2010-02-04 00:11 ./slackware64/xap/pan-0.133-x86_64-2.txt +-rw-r--r-- 1 root root 743532 2010-02-04 00:11 ./slackware64/xap/pan-0.133-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-04 00:11 ./slackware64/xap/pan-0.133-x86_64-2.txz.asc +-rw-r--r-- 1 root root 469 2010-05-18 16:55 ./slackware64/xap/pidgin-2.7.0-x86_64-1.txt +-rw-r--r-- 1 root root 6853708 2010-05-18 16:55 ./slackware64/xap/pidgin-2.7.0-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-18 16:55 ./slackware64/xap/pidgin-2.7.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 395 2008-11-06 15:45 ./slackware64/xap/rdesktop-1.6.0-x86_64-1.txt +-rw-r--r-- 1 root root 130948 2008-11-06 15:45 ./slackware64/xap/rdesktop-1.6.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2008-11-06 15:45 ./slackware64/xap/rdesktop-1.6.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 425 2009-06-09 19:32 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txt +-rw-r--r-- 1 root root 162500 2009-06-09 19:32 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txz +-rw-r--r-- 1 root root 197 2009-06-09 19:32 ./slackware64/xap/rxvt-2.7.10-x86_64-4.txz.asc +-rw-r--r-- 1 root root 321 2010-04-30 04:22 ./slackware64/xap/sane-1.0.21-x86_64-1.txt +-rw-r--r-- 1 root root 2434128 2010-04-30 04:22 ./slackware64/xap/sane-1.0.21-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-30 04:22 ./slackware64/xap/sane-1.0.21-x86_64-1.txz.asc +-rw-r--r-- 1 root root 434 2010-04-02 20:02 ./slackware64/xap/seamonkey-2.0.4-x86_64-1.txt +-rw-r--r-- 1 root root 13964960 2010-04-02 20:02 ./slackware64/xap/seamonkey-2.0.4-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-04-02 20:02 ./slackware64/xap/seamonkey-2.0.4-x86_64-1.txz.asc +-rw-r--r-- 1 root root 609 2009-03-16 23:11 ./slackware64/xap/seyon-2.20c-x86_64-3.txt +-rw-r--r-- 1 root root 113164 2009-03-16 23:11 ./slackware64/xap/seyon-2.20c-x86_64-3.txz +-rw-r--r-- 1 root root 197 2009-03-16 23:11 ./slackware64/xap/seyon-2.20c-x86_64-3.txz.asc +-rw-r--r-- 1 root root 618 2010-05-02 08:24 ./slackware64/xap/tagfile +-rw-r--r-- 1 root root 488 2009-03-16 12:27 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txt +-rw-r--r-- 1 root root 70548 2009-03-16 12:27 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-03-16 12:27 ./slackware64/xap/thunar-volman-0.3.80-x86_64-1.txz.asc +-rw-r--r-- 1 root root 505 2010-05-10 23:07 ./slackware64/xap/vim-gvim-7.2.416-x86_64-1.txt +-rw-r--r-- 1 root root 1474512 2010-05-10 23:07 ./slackware64/xap/vim-gvim-7.2.416-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-10 23:07 ./slackware64/xap/vim-gvim-7.2.416-x86_64-1.txz.asc +-rw-r--r-- 1 root root 455 2010-02-11 21:41 ./slackware64/xap/windowmaker-20060427cvs-x86_64-3.txt +-rw-r--r-- 1 root root 1799912 2010-02-11 21:41 ./slackware64/xap/windowmaker-20060427cvs-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-11 21:41 ./slackware64/xap/windowmaker-20060427cvs-x86_64-3.txz.asc +-rw-r--r-- 1 root root 308 2009-08-18 23:17 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-1.txt +-rw-r--r-- 1 root root 20584 2009-08-18 23:17 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-08-18 23:17 ./slackware64/xap/x11-ssh-askpass-1.2.4.1-x86_64-1.txz.asc +-rw-r--r-- 1 root root 310 2008-11-06 15:59 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txt +-rw-r--r-- 1 root root 508772 2008-11-06 15:59 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txz +-rw-r--r-- 1 root root 197 2008-11-06 15:59 ./slackware64/xap/x3270-3.3.7p8-x86_64-1.txz.asc +-rw-r--r-- 1 root root 164 2010-03-02 18:56 ./slackware64/xap/xchat-2.8.6-x86_64-5.txt +-rw-r--r-- 1 root root 1733504 2010-03-02 18:56 ./slackware64/xap/xchat-2.8.6-x86_64-5.txz +-rw-r--r-- 1 root root 197 2010-03-02 18:56 ./slackware64/xap/xchat-2.8.6-x86_64-5.txz.asc +-rw-r--r-- 1 root root 309 2010-05-17 03:52 ./slackware64/xap/xfce-4.6.1-x86_64-8.txt +-rw-r--r-- 1 root root 12322520 2010-05-17 03:52 ./slackware64/xap/xfce-4.6.1-x86_64-8.txz +-rw-r--r-- 1 root root 198 2010-05-17 03:52 ./slackware64/xap/xfce-4.6.1-x86_64-8.txz.asc +-rw-r--r-- 1 root root 441 2010-02-20 18:15 ./slackware64/xap/xfce4-notifyd-0.1.0-x86_64-1.txt +-rw-r--r-- 1 root root 51004 2010-02-20 18:15 ./slackware64/xap/xfce4-notifyd-0.1.0-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-20 18:15 ./slackware64/xap/xfce4-notifyd-0.1.0-x86_64-1.txz.asc +-rw-r--r-- 1 root root 472 2010-03-13 01:00 ./slackware64/xap/xfce4-power-manager-0.8.5-x86_64-1.txt +-rw-r--r-- 1 root root 478920 2010-03-13 01:00 ./slackware64/xap/xfce4-power-manager-0.8.5-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-03-13 01:00 ./slackware64/xap/xfce4-power-manager-0.8.5-x86_64-1.txz.asc +-rw-r--r-- 1 root root 411 2008-11-06 14:17 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txt +-rw-r--r-- 1 root root 837944 2008-11-06 14:17 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txz +-rw-r--r-- 1 root root 197 2008-11-06 14:17 ./slackware64/xap/xfractint-20.04p09-x86_64-1.txz.asc +-rw-r--r-- 1 root root 239 2009-08-22 21:21 ./slackware64/xap/xgames-0.3-x86_64-2.txt +-rw-r--r-- 1 root root 103428 2009-08-22 21:21 ./slackware64/xap/xgames-0.3-x86_64-2.txz +-rw-r--r-- 1 root root 197 2009-08-22 21:21 ./slackware64/xap/xgames-0.3-x86_64-2.txz.asc +-rw-r--r-- 1 root root 468 2010-02-18 23:00 ./slackware64/xap/xine-lib-1.1.17-x86_64-1.txt +-rw-r--r-- 1 root root 3637788 2010-02-18 23:00 ./slackware64/xap/xine-lib-1.1.17-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-18 23:00 ./slackware64/xap/xine-lib-1.1.17-x86_64-1.txz.asc +-rw-r--r-- 1 root root 374 2010-02-19 19:43 ./slackware64/xap/xine-ui-0.99.5-x86_64-3.txt +-rw-r--r-- 1 root root 1281472 2010-02-19 19:43 ./slackware64/xap/xine-ui-0.99.5-x86_64-3.txz +-rw-r--r-- 1 root root 197 2010-02-19 19:43 ./slackware64/xap/xine-ui-0.99.5-x86_64-3.txz.asc +-rw-r--r-- 1 root root 462 2009-08-08 01:11 ./slackware64/xap/xlockmore-5.28-x86_64-1.txt +-rw-r--r-- 1 root root 985268 2009-08-08 01:11 ./slackware64/xap/xlockmore-5.28-x86_64-1.txz +-rw-r--r-- 1 root root 197 2009-08-08 01:11 ./slackware64/xap/xlockmore-5.28-x86_64-1.txz.asc +-rw-r--r-- 1 root root 379 2010-03-25 21:58 ./slackware64/xap/xmms-1.2.11-x86_64-4.txt +-rw-r--r-- 1 root root 1153728 2010-03-25 21:58 ./slackware64/xap/xmms-1.2.11-x86_64-4.txz +-rw-r--r-- 1 root root 198 2010-03-25 21:58 ./slackware64/xap/xmms-1.2.11-x86_64-4.txz.asc +-rw-r--r-- 1 root root 445 2010-02-20 01:05 ./slackware64/xap/xpaint-2.8.16-x86_64-1.txt +-rw-r--r-- 1 root root 423688 2010-02-20 01:05 ./slackware64/xap/xpaint-2.8.16-x86_64-1.txz +-rw-r--r-- 1 root root 197 2010-02-20 01:05 ./slackware64/xap/xpaint-2.8.16-x86_64-1.txz.asc +-rw-r--r-- 1 root root 256 2010-02-11 22:00 ./slackware64/xap/xpdf-3.02pl4-x86_64-2.txt +-rw-r--r-- 1 root root 1486652 2010-02-11 22:00 ./slackware64/xap/xpdf-3.02pl4-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-11 22:00 ./slackware64/xap/xpdf-3.02pl4-x86_64-2.txz.asc +-rw-r--r-- 1 root root 499 2010-02-20 00:47 ./slackware64/xap/xsane-0.996-x86_64-2.txt +-rw-r--r-- 1 root root 1632152 2010-02-20 00:47 ./slackware64/xap/xsane-0.996-x86_64-2.txz +-rw-r--r-- 1 root root 197 2010-02-20 00:47 ./slackware64/xap/xsane-0.996-x86_64-2.txz.asc +-rw-r--r-- 1 root root 424 2010-05-03 07:24 ./slackware64/xap/xscreensaver-5.11-x86_64-1.txt +-rw-r--r-- 1 root root 3477164 2010-05-03 07:24 ./slackware64/xap/xscreensaver-5.11-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-03 07:24 ./slackware64/xap/xscreensaver-5.11-x86_64-1.txz.asc +-rw-r--r-- 1 root root 235 2010-02-19 19:32 ./slackware64/xap/xv-3.10a-x86_64-6.txt +-rw-r--r-- 1 root root 939688 2010-02-19 19:32 ./slackware64/xap/xv-3.10a-x86_64-6.txz +-rw-r--r-- 1 root root 197 2010-02-19 19:32 ./slackware64/xap/xv-3.10a-x86_64-6.txz.asc +-rw-r--r-- 1 root root 418 2008-11-06 22:42 ./slackware64/xap/xxgdb-1.12-x86_64-2.txt +-rw-r--r-- 1 root root 50184 2008-11-06 22:42 ./slackware64/xap/xxgdb-1.12-x86_64-2.txz +-rw-r--r-- 1 root root 197 2008-11-06 22:42 ./slackware64/xap/xxgdb-1.12-x86_64-2.txz.asc +drwxr-xr-x 2 root root 4096 2010-05-16 05:15 ./slackware64/y +-rw-r--r-- 1 root root 596 2010-05-15 18:03 ./slackware64/y/bsd-games-2.13-x86_64-11.txt +-rw-r--r-- 1 root root 1759252 2010-05-15 18:03 ./slackware64/y/bsd-games-2.13-x86_64-11.txz +-rw-r--r-- 1 root root 198 2010-05-15 18:03 ./slackware64/y/bsd-games-2.13-x86_64-11.txz.asc +-rwxr-xr-x 1 root root 2897 2009-06-24 22:06 ./slackware64/y/install-packages +-rw-r--r-- 1 root root 446 2006-09-18 10:41 ./slackware64/y/install.end +-rw-r--r-- 1 root root 1136 2010-03-01 01:46 ./slackware64/y/maketag +-rw-r--r-- 1 root root 1136 2010-03-01 01:46 ./slackware64/y/maketag.ez +-rw-r--r-- 1 root root 14 2010-03-01 01:46 ./slackware64/y/tagfile +drwxr-xr-x 18 root root 4096 2010-05-19 03:22 ./source +-rw-r--r-- 1 root root 326956 2010-05-19 03:22 ./source/CHECKSUMS.md5 +-rw-r--r-- 1 root root 198 2010-05-19 03:22 ./source/CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 460081 2010-05-19 03:21 ./source/FILE_LIST +-rw-r--r-- 1 root root 6808866 2010-05-19 03:21 ./source/MANIFEST.bz2 +drwxr-xr-x 91 root root 4096 2010-05-17 07:36 ./source/a +drwxr-xr-x 2 root root 4096 2010-05-14 05:48 ./source/a/aaa_base +-rw-r--r-- 1 root root 11017 2010-05-14 05:48 ./source/a/aaa_base/_aaa_base.tar.gz +-rwxr-xr-x 1 root root 2087 2010-05-16 17:45 ./source/a/aaa_base/aaa_base.SlackBuild +-rw-r--r-- 1 root root 786 2002-03-28 08:05 ./source/a/aaa_base/slack-desc +-rw-r--r-- 1 root root 17 2010-05-13 18:52 ./source/a/aaa_base/slackware-version +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/aaa_elflibs +-rwxr-xr-x 1 root root 2610 2010-05-13 18:41 ./source/a/aaa_elflibs/aaa_elflibs.SlackBuild +-rw-r--r-- 1 root root 1030 2004-06-14 04:14 ./source/a/aaa_elflibs/slack-desc +-rw-r--r-- 1 root root 1441 2010-05-03 07:31 ./source/a/aaa_elflibs/symlinks-to-tracked-libs +-rw-r--r-- 1 root root 170 2008-04-03 04:10 ./source/a/aaa_elflibs/tracked-files +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/aaa_terminfo +-rwxr-xr-x 1 root root 2183 2009-05-19 20:05 ./source/a/aaa_terminfo/aaa_terminfo.SlackBuild +-rw-r--r-- 1 root root 968 2007-01-02 23:40 ./source/a/aaa_terminfo/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/acl +-rwxr-xr-x 1 root root 3474 2009-05-19 20:05 ./source/a/acl/acl.SlackBuild +-rw-r--r-- 1 root root 507 2008-04-01 04:58 ./source/a/acl/acl.destdir.diff.gz +-rw-r--r-- 1 root root 154823 2008-02-11 06:35 ./source/a/acl/acl_2.2.47-1.tar.gz +-rw-r--r-- 1 root root 819 2006-02-21 04:39 ./source/a/acl/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-19 02:34 ./source/a/acpid +-rw-r--r-- 1 root root 224 2004-02-05 01:54 ./source/a/acpid/acpi_handler.sh.gz +-rw-r--r-- 1 root root 74405 2010-05-15 18:52 ./source/a/acpid/acpid-2.0.5.tar.gz +-rwxr-xr-x 1 root root 2939 2010-03-16 18:39 ./source/a/acpid/acpid.SlackBuild +-rw-r--r-- 1 root root 399 2002-05-16 21:44 ./source/a/acpid/default.gz +-rw-r--r-- 1 root root 271 2010-01-16 00:00 ./source/a/acpid/doinst.sh.gz +-rw-r--r-- 1 root root 285 2010-02-16 22:57 ./source/a/acpid/rc.acpid.gz +-rw-r--r-- 1 root root 867 2002-05-16 21:59 ./source/a/acpid/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/apmd +-rw-r--r-- 1 root root 61686 2004-04-30 04:29 ./source/a/apmd/apmd-3.2.2.tar.bz2 +-rwxr-xr-x 1 root root 3158 2009-06-10 01:19 ./source/a/apmd/apmd.SlackBuild +-rw-r--r-- 1 root root 1009 2002-02-22 00:45 ./source/a/apmd/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/attr +-rwxr-xr-x 1 root root 3521 2009-05-19 20:05 ./source/a/attr/attr.SlackBuild +-rw-r--r-- 1 root root 510 2008-04-01 04:54 ./source/a/attr/attr.destdir.diff.gz +-rw-r--r-- 1 root root 116991 2008-07-03 07:41 ./source/a/attr/attr_2.4.43-1.tar.gz +-rw-r--r-- 1 root root 88 2006-02-28 00:02 ./source/a/attr/build +-rw-r--r-- 1 root root 1011 2006-02-21 04:44 ./source/a/attr/slack-desc +drwxr-xr-x 3 root root 4096 2010-02-08 21:42 ./source/a/bash +drwxr-xr-x 2 root root 4096 2010-05-15 02:47 ./source/a/bash/bash-4.1-patches +-rw-r--r-- 1 root root 1445 2010-01-18 16:22 ./source/a/bash/bash-4.1-patches/bash41-001 +-rw-r--r-- 1 root root 65 2010-01-18 16:22 ./source/a/bash/bash-4.1-patches/bash41-001.sig +-rw-r--r-- 1 root root 1799 2010-01-18 16:22 ./source/a/bash/bash-4.1-patches/bash41-002 +-rw-r--r-- 1 root root 65 2010-01-18 16:22 ./source/a/bash/bash-4.1-patches/bash41-002.sig +-rw-r--r-- 1 root root 1407 2010-03-26 16:21 ./source/a/bash/bash-4.1-patches/bash41-003 +-rw-r--r-- 1 root root 65 2010-03-26 16:21 ./source/a/bash/bash-4.1-patches/bash41-003.sig +-rw-r--r-- 1 root root 1705 2010-03-26 16:21 ./source/a/bash/bash-4.1-patches/bash41-004 +-rw-r--r-- 1 root root 65 2010-03-26 16:21 ./source/a/bash/bash-4.1-patches/bash41-004.sig +-rw-r--r-- 1 root root 1626 2010-03-26 16:22 ./source/a/bash/bash-4.1-patches/bash41-005 +-rw-r--r-- 1 root root 65 2010-03-26 16:22 ./source/a/bash/bash-4.1-patches/bash41-005.sig +-rw-r--r-- 1 root root 2166 2010-05-14 18:23 ./source/a/bash/bash-4.1-patches/bash41-006 +-rw-r--r-- 1 root root 65 2010-05-14 18:23 ./source/a/bash/bash-4.1-patches/bash41-006.sig +-rw-r--r-- 1 root root 1610 2010-05-14 18:24 ./source/a/bash/bash-4.1-patches/bash41-007 +-rw-r--r-- 1 root root 65 2010-05-14 18:24 ./source/a/bash/bash-4.1-patches/bash41-007.sig +-rw-r--r-- 1 root root 4012140 2010-01-01 02:51 ./source/a/bash/bash-4.1.tar.xz +-rwxr-xr-x 1 root root 4530 2010-02-08 21:48 ./source/a/bash/bash.SlackBuild +-rw-r--r-- 1 root root 189 2009-02-23 21:59 ./source/a/bash/doinst.sh.gz +-rw-r--r-- 1 root root 965 2002-03-23 21:47 ./source/a/bash/slack-desc +drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/a/bin +-rw-r--r-- 1 root root 7275 1994-12-30 09:11 ./source/a/bin/banners.tar.gz +-rwxr-xr-x 1 root root 4222 2009-05-19 20:05 ./source/a/bin/bin.SlackBuild +-rw-r--r-- 1 root root 478 2004-02-24 17:32 ./source/a/bin/debianutils_2.7.dsc +-rw-r--r-- 1 root root 165590 2004-02-24 17:32 ./source/a/bin/debianutils_2.7.tar.gz +-rw-r--r-- 1 root root 27721 1999-10-07 14:42 ./source/a/bin/fbset-2.1.tar.gz +drwxr-xr-x 2 root root 4096 2006-12-23 06:28 ./source/a/bin/scripts +-rw-r--r-- 1 root root 195 2002-02-21 21:08 ./source/a/bin/scripts/diskcopy.gz +-rw-r--r-- 1 root root 595 1993-05-02 00:04 ./source/a/bin/scripts/xx.gz +-rw-r--r-- 1 root root 681 2006-12-21 20:40 ./source/a/bin/slack-desc +-rw-r--r-- 1 root root 2403 1997-06-15 20:38 ./source/a/bin/todos.tar.gz +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/bzip2 +-rw-r--r-- 1 root root 280 2007-01-24 04:02 ./source/a/bzip2/bzip2-1.0.4.saneso.diff.gz +-rw-r--r-- 1 root root 841402 2008-03-17 23:25 ./source/a/bzip2/bzip2-1.0.5.tar.gz +-rwxr-xr-x 1 root root 3679 2009-05-19 20:05 ./source/a/bzip2/bzip2.SlackBuild +-rw-r--r-- 1 root root 934 2002-02-19 04:26 ./source/a/bzip2/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-11 19:37 ./source/a/coreutils +-rw-r--r-- 1 root root 1723 2009-04-11 18:47 ./source/a/coreutils/DIR_COLORS.gz +-rw-r--r-- 1 root root 4531488 2010-04-23 16:42 ./source/a/coreutils/coreutils-8.5.tar.xz +-rw-r--r-- 1 root root 836 2010-04-23 16:42 ./source/a/coreutils/coreutils-8.5.tar.xz.sig +-rw-r--r-- 1 root root 778 2010-04-28 05:16 ./source/a/coreutils/coreutils-dircolors.csh.gz +-rw-r--r-- 1 root root 931 2010-05-11 19:37 ./source/a/coreutils/coreutils-dircolors.sh.gz +-rwxr-xr-x 1 root root 7045 2010-05-11 19:37 ./source/a/coreutils/coreutils.SlackBuild +-rw-r--r-- 1 root root 1610 2009-09-15 13:55 ./source/a/coreutils/coreutils.uname.diff.gz +-rw-r--r-- 1 root root 270 2009-02-23 03:00 ./source/a/coreutils/doinst.sh.gz +-rw-r--r-- 1 root root 985 2003-05-20 21:33 ./source/a/coreutils/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 02:17 ./source/a/cpio +-rw-r--r-- 1 root root 348 2009-03-15 20:17 ./source/a/cpio/cpio-2.9.gcc43.diff.gz +-rw-r--r-- 1 root root 758195 2007-06-29 16:51 ./source/a/cpio/cpio-2.9.tar.bz2 +-rwxr-xr-x 1 root root 3664 2009-05-19 20:05 ./source/a/cpio/cpio.SlackBuild +-rw-r--r-- 1 root root 942 2002-03-23 21:52 ./source/a/cpio/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-11 20:17 ./source/a/cpufrequtils +-rw-r--r-- 1 root root 51959 2010-01-16 16:42 ./source/a/cpufrequtils/cpufrequtils-007.tar.bz2 +-rw-r--r-- 1 root root 248 2010-01-16 16:42 ./source/a/cpufrequtils/cpufrequtils-007.tar.bz2.sign +-rwxr-xr-x 1 root root 3298 2010-03-11 20:10 ./source/a/cpufrequtils/cpufrequtils.SlackBuild +-rw-r--r-- 1 root root 1083 2010-03-11 20:18 ./source/a/cpufrequtils/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-19 23:32 ./source/a/cryptsetup +-rw-r--r-- 1 root root 465778 2010-01-17 11:01 ./source/a/cryptsetup/cryptsetup-1.1.0.tar.bz2 +-rw-r--r-- 1 root root 198 2010-01-17 11:02 ./source/a/cryptsetup/cryptsetup-1.1.0.tar.bz2.asc +-rwxr-xr-x 1 root root 4179 2010-04-30 22:02 ./source/a/cryptsetup/cryptsetup.SlackBuild +-rw-r--r-- 1 root root 1042 2007-05-26 11:18 ./source/a/cryptsetup/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-17 07:39 ./source/a/cups +-rw-r--r-- 1 root root 4461101 2010-03-30 20:46 ./source/a/cups/cups-1.4.3-source.tar.bz2 +-rw-r--r-- 1 root root 199167 2004-01-03 18:49 ./source/a/cups/cups-samba-5.0rc3.tar.gz +-rw-r--r-- 1 root root 38284 2006-04-19 23:55 ./source/a/cups/cups-windows-6.0-source.tar.bz2 +-rwxr-xr-x 1 root root 6603 2010-05-17 07:37 ./source/a/cups/cups.SlackBuild +-rw-r--r-- 1 root root 565 2010-05-17 07:39 ./source/a/cups/doinst.sh.gz +-rw-r--r-- 1 root root 1099 2002-02-01 20:47 ./source/a/cups/slack-desc +-rw-r--r-- 1 root root 5324 2010-04-26 14:49 ./source/a/cups/usb-backend-both-usblp-and-libusb.dpatch.gz +drwxr-xr-x 3 root root 4096 2009-07-24 23:40 ./source/a/cxxlibs +-rwxr-xr-x 1 root root 2099 2010-05-13 18:40 ./source/a/cxxlibs/cxxlibs.SlackBuild +drwxr-xr-x 2 root root 4096 2009-07-24 21:14 ./source/a/cxxlibs/oldgcc +-rw-r--r-- 1 root root 23972413 2007-05-31 19:07 ./source/a/cxxlibs/oldgcc/gcc-3.3.6.tar.bz2 +-rw-r--r-- 1 root root 65 2007-05-31 19:07 ./source/a/cxxlibs/oldgcc/gcc-3.3.6.tar.bz2.sig +-rwxr-xr-x 1 root root 2455 2009-07-24 21:15 ./source/a/cxxlibs/oldgcc/oldgcc.build +-rw-r--r-- 1 root root 738 2002-03-23 21:52 ./source/a/cxxlibs/slack-desc +-rw-r--r-- 1 root root 224 2008-04-03 05:03 ./source/a/cxxlibs/symlinks-to-tracked-libs +-rw-r--r-- 1 root root 52 2009-07-24 23:39 ./source/a/cxxlibs/symlinks-to-tracked-libs64 +drwxr-xr-x 2 root root 4096 2010-05-01 02:31 ./source/a/dbus +-rw-r--r-- 1 root root 1112192 2010-03-23 19:50 ./source/a/dbus/dbus-1.2.24.tar.xz +-rw-r--r-- 1 root root 594 2009-10-31 05:49 ./source/a/dbus/dbus-1.2.x-allow_root_globally.diff.gz +-rwxr-xr-x 1 root root 4083 2010-05-01 02:31 ./source/a/dbus/dbus.SlackBuild +-rw-r--r-- 1 root root 355 2008-09-23 18:06 ./source/a/dbus/doinst.sh.gz +-rw-r--r-- 1 root root 773 2010-05-01 02:31 ./source/a/dbus/rc.messagebus.gz +-rw-r--r-- 1 root root 945 2007-10-21 22:41 ./source/a/dbus/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-11 23:27 ./source/a/dcron +-rw-r--r-- 1 root root 315 2010-02-11 22:38 ./source/a/dcron/crontab.c.O_EXCL.diff.gz +-rw-r--r-- 1 root root 519 2009-05-30 01:25 ./source/a/dcron/crontab.root.gz +-rw-r--r-- 1 root root 36404 2010-01-18 15:28 ./source/a/dcron/dcron-4.4.tar.gz +-rwxr-xr-x 1 root root 4105 2010-02-11 23:24 ./source/a/dcron/dcron.SlackBuild +-rw-r--r-- 1 root root 1054 2010-02-11 23:23 ./source/a/dcron/dcron.manpage.paths.diff.gz +-rw-r--r-- 1 root root 193 2010-02-11 22:39 ./source/a/dcron/defs.h.TMPDIR.diff.gz +-rw-r--r-- 1 root root 104 2010-02-11 23:27 ./source/a/dcron/doinst.sh.gz +-rw-r--r-- 1 root root 699 2009-05-30 01:25 ./source/a/dcron/run-parts.8.gz +-rw-r--r-- 1 root root 567 2009-05-30 01:25 ./source/a/dcron/run-parts.gz +-rw-r--r-- 1 root root 815 2009-05-30 01:25 ./source/a/dcron/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/devs +-rw-r--r-- 1 root root 92572 2006-09-20 03:46 ./source/a/devs/_devs.tar.gz +-rwxr-xr-x 1 root root 2044 2009-05-19 20:05 ./source/a/devs/devs.SlackBuild +-rw-r--r-- 1 root root 423 2002-06-09 19:32 ./source/a/devs/makedev.hd.diff.gz +-rw-r--r-- 1 root root 27096 2000-11-11 19:33 ./source/a/devs/makedev_2.3.1-46.2.diff.gz +-rw-r--r-- 1 root root 602 2003-09-02 20:00 ./source/a/devs/makedev_2.3.1.hd.diff.gz +-rw-r--r-- 1 root root 10037 1998-09-07 17:52 ./source/a/devs/makedev_2.3.1.orig.tar.gz +-rw-r--r-- 1 root root 262 2004-05-21 02:29 ./source/a/devs/makedev_2.3.1.slack.diff.gz +-rw-r--r-- 1 root root 766 2002-03-20 01:10 ./source/a/devs/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/dialog +-rw-r--r-- 1 root root 301393 2008-08-20 00:36 ./source/a/dialog/dialog-1.1-20080819.tar.bz2 +-rwxr-xr-x 1 root root 3537 2009-05-23 00:41 ./source/a/dialog/dialog.SlackBuild +-rw-r--r-- 1 root root 334 2009-04-23 01:28 ./source/a/dialog/dialog.smaller.min.height.diff.gz +-rw-r--r-- 1 root root 970 2007-01-02 22:29 ./source/a/dialog/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/dosfstools +-rw-r--r-- 1 root root 68346 2005-03-12 16:33 ./source/a/dosfstools/dosfstools-2.11.src.tar.gz +-rwxr-xr-x 1 root root 2605 2009-05-19 20:05 ./source/a/dosfstools/dosfstools.SlackBuild +-rw-r--r-- 1 root root 742 2006-12-21 20:33 ./source/a/dosfstools/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-19 16:50 ./source/a/e2fsprogs +-rw-r--r-- 1 root root 325 2009-05-30 01:25 ./source/a/e2fsprogs/doinst.sh.gz +-rw-r--r-- 1 root root 3359344 2010-03-15 05:09 ./source/a/e2fsprogs/e2fsprogs-1.41.11.tar.xz +-rwxr-xr-x 1 root root 5191 2010-03-19 16:50 ./source/a/e2fsprogs/e2fsprogs.SlackBuild +-rw-r--r-- 1 root root 803 2009-05-30 01:25 ./source/a/e2fsprogs/slack-desc +drwxr-xr-x 2 root root 4096 2009-06-12 20:59 ./source/a/ed +-rw-r--r-- 1 root root 69427 2009-05-23 22:58 ./source/a/ed/ed-1.3.tar.bz2 +-rwxr-xr-x 1 root root 3177 2009-06-12 21:01 ./source/a/ed/ed.SlackBuild +-rw-r--r-- 1 root root 805 2006-12-13 23:11 ./source/a/ed/slack-desc +drwxr-xr-x 2 root root 4096 2010-01-25 21:58 ./source/a/eject +-rw-r--r-- 1 root root 107301 2006-06-04 19:58 ./source/a/eject/eject-2.1.5.tar.bz2 +-rwxr-xr-x 1 root root 3501 2010-01-25 22:00 ./source/a/eject/eject.SlackBuild +-rw-r--r-- 1 root root 883 2010-01-25 21:57 ./source/a/eject/eject.spaces.diff.gz +-rw-r--r-- 1 root root 886 2006-12-14 01:32 ./source/a/eject/slack-desc +drwxr-xr-x 2 root root 4096 2010-01-27 18:31 ./source/a/elvis +-rw-r--r-- 1 root root 1143603 2003-10-21 02:35 ./source/a/elvis/elvis-2.2_0.tar.bz2 +-rwxr-xr-x 1 root root 4002 2010-01-27 18:32 ./source/a/elvis/elvis.SlackBuild +-rw-r--r-- 1 root root 1633 2004-02-22 06:19 ./source/a/elvis/elvis.clr +-rw-r--r-- 1 root root 1584 2003-10-21 02:32 ./source/a/elvis/elvis.clr.orig +-rw-r--r-- 1 root root 673 2010-01-27 18:31 ./source/a/elvis/elvis.ref.c.getline.diff.gz +-rw-r--r-- 1 root root 845 2008-02-11 03:44 ./source/a/elvis/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-05 23:31 ./source/a/etc +-rw-r--r-- 1 root root 34612 2010-02-05 23:31 ./source/a/etc/_etc.tar.gz +-rwxr-xr-x 1 root root 2032 2010-02-05 23:32 ./source/a/etc/etc.SlackBuild +-rw-r--r-- 1 root root 536 2002-10-11 20:17 ./source/a/etc/nsswitch.conf.gz +-rw-r--r-- 1 root root 657 2002-03-23 21:54 ./source/a/etc/slack-desc +-rw-r--r-- 1 root root 226973 2000-03-02 23:51 ./source/a/etc/termcap-BSD.gz +drwxr-xr-x 2 root root 4096 2010-01-23 05:16 ./source/a/file +-rw-r--r-- 1 root root 408264 2010-01-22 21:46 ./source/a/file/file-5.04.tar.xz +-rwxr-xr-x 1 root root 5048 2010-02-06 03:07 ./source/a/file/file.SlackBuild +-rw-r--r-- 1 root root 195 2009-02-23 01:20 ./source/a/file/file.crdaregbin.magic.gz +-rw-r--r-- 1 root root 212 2009-06-12 22:40 ./source/a/file/file.etc.file.diff.gz +-rw-r--r-- 1 root root 336 2009-02-09 04:19 ./source/a/file/file.quiet.diff.gz +-rw-r--r-- 1 root root 272 2009-02-09 04:17 ./source/a/file/file.short.diff.gz +-rw-r--r-- 1 root root 248 2009-04-23 04:50 ./source/a/file/file.xz.magic.gz +-rw-r--r-- 1 root root 214 2005-09-07 03:59 ./source/a/file/file.zisofs.magic.gz +-rw-r--r-- 1 root root 680 2006-12-13 22:49 ./source/a/file/slack-desc +drwxr-xr-x 2 root root 4096 2009-06-13 00:01 ./source/a/findutils +-rw-r--r-- 1 root root 1114432 2009-06-06 14:38 ./source/a/findutils/findutils-4.4.2.tar.xz +-rwxr-xr-x 1 root root 3575 2009-06-13 00:02 ./source/a/findutils/findutils.SlackBuild +-rw-r--r-- 1 root root 186 2009-02-21 21:50 ./source/a/findutils/findutils.no.default.options.warnings.diff.gz +-rw-r--r-- 1 root root 359 2009-02-21 21:19 ./source/a/findutils/findutils.nolocate.diff.gz +-rw-r--r-- 1 root root 828 2002-04-07 10:22 ./source/a/findutils/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 02:17 ./source/a/floppy +-rw-r--r-- 1 root root 25310 2002-05-01 02:18 ./source/a/floppy/fdutils-5.4-20020222.diff.gz +-rw-r--r-- 1 root root 190535 2001-02-04 04:36 ./source/a/floppy/fdutils-5.4.tar.gz +-rw-r--r-- 1 root root 182 2001-02-04 05:02 ./source/a/floppy/fdutils.mediaprm.diff.gz +-rwxr-xr-x 1 root root 3386 2009-05-19 20:05 ./source/a/floppy/floppy.SlackBuild +-rw-r--r-- 1 root root 11298 2002-05-01 02:21 ./source/a/floppy/mediaprm +-rw-r--r-- 1 root root 286730 2001-05-27 12:42 ./source/a/floppy/mtools-3.9.8.tar.gz +-rw-r--r-- 1 root root 1914 2001-02-04 04:50 ./source/a/floppy/mtools.conf +-rw-r--r-- 1 root root 728 2002-03-23 21:55 ./source/a/floppy/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-09 18:52 ./source/a/gawk +-rw-r--r-- 1 root root 1523944 2010-05-07 21:41 ./source/a/gawk/gawk-3.1.8.tar.xz +-rwxr-xr-x 1 root root 3742 2010-05-09 18:52 ./source/a/gawk/gawk.SlackBuild +-rw-r--r-- 1 root root 1043 2002-03-23 21:56 ./source/a/gawk/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/genpower +-rw-r--r-- 1 root root 66728 2005-01-04 22:32 ./source/a/genpower/genpower-1.0.5.tar.gz +-rwxr-xr-x 1 root root 3077 2009-05-19 20:05 ./source/a/genpower/genpower.SlackBuild +-rw-r--r-- 1 root root 514 2008-12-03 00:22 ./source/a/genpower/genpower.halt.diff.gz +-rw-r--r-- 1 root root 460 2002-04-11 03:18 ./source/a/genpower/genpower.var.diff.gz +-rw-r--r-- 1 root root 957 2002-04-11 05:06 ./source/a/genpower/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/gettext +-rw-r--r-- 1 root root 8236607 2007-11-07 03:14 ./source/a/gettext/gettext-0.17.tar.bz2 +-rwxr-xr-x 1 root root 3584 2010-01-13 00:49 ./source/a/gettext/gettext-tools.SlackBuild +-rwxr-xr-x 1 root root 3416 2010-01-13 00:55 ./source/a/gettext/gettext.SlackBuild +-rw-r--r-- 1 root root 737 2008-02-11 03:44 ./source/a/gettext/slack-desc +-rw-r--r-- 1 root root 1093 2008-02-11 03:44 ./source/a/gettext/slack-desc.gettext-tools +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/getty-ps +-rwxr-xr-x 1 root root 2667 2009-05-19 20:05 ./source/a/getty-ps/getty-ps.SlackBuild +-rw-r--r-- 1 root root 3609 2005-07-21 12:27 ./source/a/getty-ps/getty.bugfixes.diff.gz +-rw-r--r-- 1 root root 1223 2002-10-04 05:00 ./source/a/getty-ps/getty_ps-2.1.0.lsm +-rw-r--r-- 1 root root 117414 2005-07-21 12:27 ./source/a/getty-ps/getty_ps-2.1.0b.tar.gz +-rw-r--r-- 1 root root 969 2008-02-11 03:44 ./source/a/getty-ps/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/gpm +-rw-r--r-- 1 root root 344 2004-10-13 20:51 ./source/a/gpm/gpm-1.20.1-consolename.patch.gz +-rw-r--r-- 1 root root 404 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-gpmopen.patch.gz +-rw-r--r-- 1 root root 274 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-idie.patch.gz +-rw-r--r-- 1 root root 289 2006-12-12 02:00 ./source/a/gpm/gpm-1.20.1-input-defines.diff.gz +-rw-r--r-- 1 root root 301 2004-09-23 18:46 ./source/a/gpm/gpm-1.20.1-input.patch.gz +-rw-r--r-- 1 root root 362 2006-01-18 12:07 ./source/a/gpm/gpm-1.20.1-lib-silent.patch.gz +-rw-r--r-- 1 root root 294 2004-09-09 05:51 ./source/a/gpm/gpm-1.20.1-math.patch.gz +-rw-r--r-- 1 root root 791 2004-10-20 21:28 ./source/a/gpm/gpm-1.20.1-multilib.patch.gz +-rw-r--r-- 1 root root 356 2006-01-18 12:07 ./source/a/gpm/gpm-1.20.1-no-console-error.patch.gz +-rw-r--r-- 1 root root 249 2004-10-13 20:03 ./source/a/gpm/gpm-1.20.1-nodebug.patch.gz +-rw-r--r-- 1 root root 237 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-subscript.patch.gz +-rw-r--r-- 1 root root 515 2004-09-09 05:52 ./source/a/gpm/gpm-1.20.1-weak-wgetch.patch.gz +-rw-r--r-- 1 root root 651 2006-08-20 19:46 ./source/a/gpm/gpm-1.20.1.send-noise-to-syslogs.diff.gz +-rw-r--r-- 1 root root 565014 2004-06-25 18:13 ./source/a/gpm/gpm-1.20.1.tar.bz2 +-rw-r--r-- 1 root root 59408 2004-09-09 05:52 ./source/a/gpm/gpm-evdev-cumulative.patch.gz +-rwxr-xr-x 1 root root 5475 2009-05-19 20:05 ./source/a/gpm/gpm.SlackBuild +-rw-r--r-- 1 root root 285 2006-02-07 21:26 ./source/a/gpm/gpm.evdevmakefile.patch.gz +-rw-r--r-- 1 root root 4268 2004-09-09 05:52 ./source/a/gpm/inputattach.c.gz +-rw-r--r-- 1 root root 168 2001-04-15 23:47 ./source/a/gpm/mouseconfig.gz +-rw-r--r-- 1 root root 2117 2008-03-15 20:30 ./source/a/gpm/setup.mouse.gz +-rw-r--r-- 1 root root 965 2002-05-29 01:05 ./source/a/gpm/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/grep +-rw-r--r-- 1 root root 723181 2009-02-10 13:58 ./source/a/grep/grep-2.5.4.tar.bz2 +-rwxr-xr-x 1 root root 3292 2009-05-19 20:05 ./source/a/grep/grep.SlackBuild +-rw-r--r-- 1 root root 747 2002-04-02 08:53 ./source/a/grep/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-09 01:11 ./source/a/gzip +-rw-r--r-- 1 root root 618124 2010-01-20 18:52 ./source/a/gzip/gzip-1.4.tar.xz +-rw-r--r-- 1 root root 836 2010-01-20 18:52 ./source/a/gzip/gzip-1.4.tar.xz.sig +-rwxr-xr-x 1 root root 4934 2010-02-09 01:11 ./source/a/gzip/gzip.SlackBuild +-rw-r--r-- 1 root root 770 2002-03-23 21:58 ./source/a/gzip/slack-desc +drwxr-xr-x 2 root root 4096 2009-10-13 22:55 ./source/a/hdparm +-rw-r--r-- 1 root root 97565 2009-10-02 13:18 ./source/a/hdparm/hdparm-9.27.tar.bz2 +-rwxr-xr-x 1 root root 2227 2009-10-13 22:55 ./source/a/hdparm/hdparm.SlackBuild +-rw-r--r-- 1 root root 805 2002-02-22 00:10 ./source/a/hdparm/slack-desc +drwxr-xr-x 2 root root 4096 2009-08-24 08:47 ./source/a/infozip +-rwxr-xr-x 1 root root 3159 2009-08-24 08:48 ./source/a/infozip/infozip.SlackBuild +-rw-r--r-- 1 root root 924 2002-03-29 01:12 ./source/a/infozip/slack-desc +-rw-r--r-- 1 root root 882180 2009-01-02 16:33 ./source/a/infozip/unzip60.tar.xz +-rw-r--r-- 1 root root 775420 2008-07-05 17:31 ./source/a/infozip/zip30.tar.xz +drwxr-xr-x 2 root root 4096 2010-05-08 07:54 ./source/a/inotify-tools +-rw-r--r-- 1 root root 243384 2010-03-14 13:56 ./source/a/inotify-tools/inotify-tools-3.14.tar.xz +-rwxr-xr-x 1 root root 3972 2010-05-08 07:55 ./source/a/inotify-tools/inotify-tools.SlackBuild +-rw-r--r-- 1 root root 977 2008-02-11 03:44 ./source/a/inotify-tools/slack-desc +drwxr-xr-x 2 root root 4096 2009-06-12 23:20 ./source/a/jfsutils +-rw-r--r-- 1 root root 414662 2009-04-06 19:17 ./source/a/jfsutils/jfsutils-1.1.14.tar.bz2 +-rwxr-xr-x 1 root root 3047 2009-06-12 23:20 ./source/a/jfsutils/jfsutils.SlackBuild +-rw-r--r-- 1 root root 998 2003-02-16 21:43 ./source/a/jfsutils/slack-desc +drwxr-xr-x 3 root root 4096 2010-04-29 06:02 ./source/a/kbd +-rwxr-xr-x 1 root root 7076 2010-04-29 06:13 ./source/a/kbd/kbd.SlackBuild +-rw-r--r-- 1 root root 11717 2010-04-29 06:02 ./source/a/kbd/setconsolefont +-rw-r--r-- 1 root root 283 2009-05-14 19:13 ./source/a/kbd/setup.setconsolefont +-rw-r--r-- 1 root root 919 2003-02-27 23:42 ./source/a/kbd/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-29 05:19 ./source/a/kbd/sources +-rw-r--r-- 1 root root 24797 2001-05-26 05:49 ./source/a/kbd/sources/extraf.tgz +-rw-r--r-- 1 root root 960 2009-01-08 14:46 ./source/a/kbd/sources/kbd-1.15-keycodes-man.patch.gz +-rw-r--r-- 1 root root 270 2009-01-08 14:46 ./source/a/kbd/sources/kbd-1.15-resizecon-x86_64.patch.gz +-rw-r--r-- 1 root root 399 2009-08-25 01:23 ./source/a/kbd/sources/kbd-1.15-unicode_start.patch.gz +-rw-r--r-- 1 root root 213 2010-04-29 05:19 ./source/a/kbd/sources/kbd-1.15.2-po.patch.gz +-rw-r--r-- 1 root root 1040140 2010-04-10 21:35 ./source/a/kbd/sources/kbd-1.15.2.tar.bz2 +-rw-r--r-- 1 root root 248 2010-04-10 21:35 ./source/a/kbd/sources/kbd-1.15.2.tar.bz2.sign +-rw-r--r-- 1 root root 4291 2007-10-15 12:16 ./source/a/kbd/sources/kbd-latarcyrheb-16-fixed.tar.bz2 +-rw-r--r-- 1 root root 6155 2006-09-29 11:13 ./source/a/kbd/sources/kbd-latsun-fonts.tar.bz2 +-rw-r--r-- 1 root root 224 2004-05-30 04:18 ./source/a/kbd/sources/nl.euro.diff.gz +-rw-r--r-- 1 root root 2338 2007-11-14 11:41 ./source/a/kbd/sources/ro_maps.tar.bz2 +-rw-r--r-- 1 root root 3543 2002-05-24 21:22 ./source/a/kbd/sources/speakup-jfw.tar.gz +-rw-r--r-- 1 root root 2246 2001-10-05 13:14 ./source/a/kbd/sources/speakupmap.map.gz +drwxr-xr-x 2 root root 4096 2009-11-10 05:41 ./source/a/less +-rw-r--r-- 1 root root 246126 2009-08-31 20:42 ./source/a/less/less-436.tar.bz2 +-rwxr-xr-x 1 root root 3397 2010-02-09 01:05 ./source/a/less/less.SlackBuild +-rw-r--r-- 1 root root 313 2002-05-28 00:15 ./source/a/less/less.sysconfdir.diff.gz +-rw-r--r-- 1 root root 1355 2009-11-05 23:57 ./source/a/less/lesspipe.sh.gz +-rw-r--r-- 1 root root 841 2002-03-23 22:00 ./source/a/less/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/lha +-rw-r--r-- 1 root root 64608 2000-12-15 12:20 ./source/a/lha/lha-114i.tar.gz +-rwxr-xr-x 1 root root 2533 2009-05-19 20:05 ./source/a/lha/lha.SlackBuild +-rw-r--r-- 1 root root 45132 2006-12-13 19:47 ./source/a/lha/lha_1.14i-10.1.diff.gz +-rw-r--r-- 1 root root 606 2006-12-23 05:46 ./source/a/lha/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-15 01:58 ./source/a/lilo +-rw-r--r-- 1 root root 437555 2007-02-19 18:18 ./source/a/lilo/lilo-22.8.src.tar.gz +-rw-r--r-- 1 root root 536 2007-02-19 18:18 ./source/a/lilo/lilo-22.8.src.tar.gz.sig +-rwxr-xr-x 1 root root 3181 2010-02-15 02:09 ./source/a/lilo/lilo.SlackBuild +-rw-r--r-- 1 root root 709 2009-12-18 05:12 ./source/a/lilo/lilo.use_major_minor_instead_lvm_name.diff.gz +-rw-r--r-- 1 root root 38380 2009-02-23 11:00 ./source/a/lilo/liloconfig +-rw-r--r-- 1 root root 105 2002-03-09 08:27 ./source/a/lilo/setup.liloconfig +-rw-r--r-- 1 root root 1045 2002-03-23 22:00 ./source/a/lilo/slack-desc +-rw-r--r-- 1 root root 14174 2010-02-15 01:57 ./source/a/lilo/slack.bmp +-rw-r--r-- 1 root root 133 2008-02-22 00:08 ./source/a/lilo/slack.dat +-rw-r--r-- 1 root root 17318 2008-12-09 00:56 ./source/a/lilo/slack64.bmp +-rw-r--r-- 1 root root 3331 1994-07-08 18:55 ./source/a/lilo/text.lilohelp +drwxr-xr-x 2 root root 4096 2010-02-12 00:19 ./source/a/logrotate +-rw-r--r-- 1 root root 268 2009-05-30 01:28 ./source/a/logrotate/doinst.sh.gz +-rw-r--r-- 1 root root 37716 2009-05-30 01:28 ./source/a/logrotate/logrotate-3.7.8.tar.xz +-rwxr-xr-x 1 root root 3243 2010-02-12 00:20 ./source/a/logrotate/logrotate.SlackBuild +-rw-r--r-- 1 root root 645 2009-05-30 01:28 ./source/a/logrotate/logrotate.conf.gz +-rw-r--r-- 1 root root 131 2009-05-30 01:28 ./source/a/logrotate/logrotate.cron.gz +-rw-r--r-- 1 root root 1076 2009-05-30 01:28 ./source/a/logrotate/logrotate.slackware.diff.gz +-rw-r--r-- 1 root root 993 2009-05-30 01:28 ./source/a/logrotate/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 07:13 ./source/a/lvm2 +-rw-r--r-- 1 root root 644304 2010-04-30 15:21 ./source/a/lvm2/LVM2.2.02.64.tar.xz +-rw-r--r-- 1 root root 271 2008-10-06 12:21 ./source/a/lvm2/doinst.sh.gz +-rwxr-xr-x 1 root root 4375 2010-05-04 07:28 ./source/a/lvm2/lvm2.SlackBuild +-rw-r--r-- 1 root root 1012 2008-02-08 17:26 ./source/a/lvm2/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-17 01:56 ./source/a/mdadm +-rw-r--r-- 1 root root 261 2004-05-27 18:31 ./source/a/mdadm/doinst.sh.gz +-rw-r--r-- 1 root root 156358 2009-03-10 06:01 ./source/a/mdadm/mdadm-2.6.9.tar.bz2 +-rw-r--r-- 1 root root 248 2009-03-10 06:01 ./source/a/mdadm/mdadm-2.6.9.tar.bz2.sign +-rwxr-xr-x 1 root root 2801 2010-05-17 01:57 ./source/a/mdadm/mdadm.SlackBuild +-rw-r--r-- 1 root root 258 2010-05-17 01:56 ./source/a/mdadm/mdadm.static.diff.gz +-rw-r--r-- 1 root root 928 2004-05-27 18:23 ./source/a/mdadm/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/minicom +-rw-r--r-- 1 root root 503 2008-09-30 10:20 ./source/a/minicom/config.sub-x86_64.diff.gz +-rw-r--r-- 1 root root 289 2004-09-04 21:22 ./source/a/minicom/doinst.sh.gz +-rw-r--r-- 1 root root 16580 2001-03-25 19:17 ./source/a/minicom/lrzsz_0.12.21-4.diff.gz +-rw-r--r-- 1 root root 287790 1999-09-19 19:01 ./source/a/minicom/lrzsz_0.12.21.orig.tar.gz +-rw-r--r-- 1 root root 607939 2003-09-17 21:55 ./source/a/minicom/minicom-2.1.tar.gz +-rw-r--r-- 1 root root 189 2003-09-17 21:54 ./source/a/minicom/minicom-2.1.tar.gz.asc +-rwxr-xr-x 1 root root 5033 2010-05-17 22:12 ./source/a/minicom/minicom.SlackBuild +-rw-r--r-- 1 root root 570 2004-09-04 21:17 ./source/a/minicom/minicom.users.gz +-rw-r--r-- 1 root root 92 2004-09-04 21:16 ./source/a/minicom/minirc.dfl.gz +-rw-r--r-- 1 root root 781 2002-03-29 01:13 ./source/a/minicom/slack-desc +-rw-r--r-- 1 root root 568 2008-10-02 19:18 ./source/a/minicom/wintcap.diff.gz +drwxr-xr-x 2 root root 4096 2010-04-22 19:31 ./source/a/mkinitrd +-rw-r--r-- 1 root root 3650 2010-01-09 05:40 ./source/a/mkinitrd/README.initrd +-rw-r--r-- 1 root root 2589 2010-04-01 21:26 ./source/a/mkinitrd/_initrd-tree.tar.gz +-rw-r--r-- 1 root root 1987727 2009-12-18 05:11 ./source/a/mkinitrd/busybox-1.15.3.tar.bz2 +-rw-r--r-- 1 root root 21604 2009-12-18 05:10 ./source/a/mkinitrd/busybox-dot-config +-rwxr-xr-x 1 root root 10439 2010-05-08 04:47 ./source/a/mkinitrd/init +-rw-r--r-- 1 root root 29903 2009-12-18 05:10 ./source/a/mkinitrd/keymaps.tar.gz +-rw-r--r-- 1 root root 20297 2010-03-27 15:49 ./source/a/mkinitrd/mkinitrd +-rw-r--r-- 1 root root 7669 2010-03-27 16:18 ./source/a/mkinitrd/mkinitrd.8 +-rwxr-xr-x 1 root root 4745 2010-05-08 04:47 ./source/a/mkinitrd/mkinitrd.SlackBuild +-rw-r--r-- 1 root root 5333 2010-03-27 16:36 ./source/a/mkinitrd/mkinitrd.conf.5 +-rw-r--r-- 1 root root 402 2010-03-04 00:04 ./source/a/mkinitrd/mkinitrd.conf.sample +-rw-r--r-- 1 root root 27270 2009-12-19 16:17 ./source/a/mkinitrd/mkinitrd_command_generator.sh +-rw-r--r-- 1 root root 988 2009-12-18 05:07 ./source/a/mkinitrd/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-06 20:21 ./source/a/module-init-tools +-rw-r--r-- 1 root root 669 2009-10-15 13:15 ./source/a/module-init-tools/modprobe.ignore_some_suffixes.diff.gz +-rw-r--r-- 1 root root 295 2010-02-06 20:01 ./source/a/module-init-tools/modprobe.quit.whining.about.modprobe.conf.diff.gz +-rw-r--r-- 1 root root 200815 2009-10-21 13:29 ./source/a/module-init-tools/module-init-tools-3.11.1.tar.bz2 +-rwxr-xr-x 1 root root 3832 2010-02-06 20:29 ./source/a/module-init-tools/module-init-tools.SlackBuild +-rw-r--r-- 1 root root 857 2009-05-30 01:28 ./source/a/module-init-tools/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/mt-st +-rw-r--r-- 1 root root 375 2007-05-15 02:19 ./source/a/mt-st/_mt-st.tar.gz +-rw-r--r-- 1 root root 36537 2005-08-21 19:14 ./source/a/mt-st/mt-st-0.9b.tar.gz +-rwxr-xr-x 1 root root 2702 2009-05-19 20:05 ./source/a/mt-st/mt-st.SlackBuild +-rw-r--r-- 1 root root 949 2005-04-07 06:26 ./source/a/mt-st/mt-st.config.diff.gz +-rw-r--r-- 1 root root 358 2005-10-25 10:17 ./source/a/mt-st/mt-st.man.diff.gz +-rw-r--r-- 1 root root 236 2004-09-09 08:51 ./source/a/mt-st/mt-st.sdlt.diff.gz +-rw-r--r-- 1 root root 943 2002-02-24 20:29 ./source/a/mt-st/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/mtx +-rw-r--r-- 1 root root 220990 2007-01-25 23:16 ./source/a/mtx/mtx-1.3.9.tar.gz +-rwxr-xr-x 1 root root 2745 2009-05-19 20:05 ./source/a/mtx/mtx.SlackBuild +-rw-r--r-- 1 root root 854 2007-01-25 23:21 ./source/a/mtx/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/ncompress +-rw-r--r-- 1 root root 304 2006-08-11 11:44 ./source/a/ncompress/ncompress-4.2.4-bssUnderflow.patch.gz +-rw-r--r-- 1 root root 207 2006-09-19 12:34 ./source/a/ncompress/ncompress-4.2.4-endians.patch.gz +-rw-r--r-- 1 root root 32533 1996-12-24 07:00 ./source/a/ncompress/ncompress-4.2.4.tar.gz +-rw-r--r-- 1 root root 220 2004-10-05 09:15 ./source/a/ncompress/ncompress.2GB.diff.gz +-rwxr-xr-x 1 root root 3100 2009-05-19 20:05 ./source/a/ncompress/ncompress.SlackBuild +-rw-r--r-- 1 root root 1164 2004-09-09 09:01 ./source/a/ncompress/ncompress.filenamelen.diff.gz +-rw-r--r-- 1 root root 773 2004-09-09 09:01 ./source/a/ncompress/ncompress.lfs2.diff.gz +-rw-r--r-- 1 root root 952 2004-09-09 09:00 ./source/a/ncompress/ncompress.make.diff.gz +-rw-r--r-- 1 root root 389 2006-04-21 12:20 ./source/a/ncompress/ncompress.zerobyteforce.diff.gz +-rw-r--r-- 1 root root 1020 2006-12-14 01:48 ./source/a/ncompress/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-08 18:47 ./source/a/ntfs-3g +-rw-r--r-- 1 root root 2067 2010-01-18 16:00 ./source/a/ntfs-3g/10-ntfs-3g-policy.fdi +-rw-r--r-- 1 root root 539596 2010-03-06 20:41 ./source/a/ntfs-3g/ntfs-3g-2010.3.6.tar.xz +-rwxr-xr-x 1 root root 4086 2010-02-09 21:41 ./source/a/ntfs-3g/ntfs-3g.SlackBuild +-rw-r--r-- 1 root root 1003 2008-03-15 03:46 ./source/a/ntfs-3g/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/patch +-rw-r--r-- 1 root root 186879 1999-08-31 09:17 ./source/a/patch/patch-2.5.4.tar.gz +-rwxr-xr-x 1 root root 2191 2009-05-19 20:05 ./source/a/patch/patch.SlackBuild +-rw-r--r-- 1 root root 1020 2006-12-14 02:21 ./source/a/patch/slack-desc +drwxr-xr-x 2 root root 4096 2010-01-20 14:15 ./source/a/pciutils +-rw-r--r-- 1 root root 284099 2010-01-19 09:40 ./source/a/pciutils/pciutils-3.1.5.tar.bz2 +-rwxr-xr-x 1 root root 3525 2010-02-09 03:45 ./source/a/pciutils/pciutils.SlackBuild +-rw-r--r-- 1 root root 306 2009-07-29 07:26 ./source/a/pciutils/pciutils.ids.dest.diff.gz +-rw-r--r-- 1 root root 92 2008-04-01 21:00 ./source/a/pciutils/pciutils.url +-rw-r--r-- 1 root root 895 2006-12-19 23:55 ./source/a/pciutils/slack-desc +drwxr-xr-x 3 root root 4096 2009-05-23 02:18 ./source/a/pcmciautils +-rw-r--r-- 1 root root 1429 2007-03-16 14:50 ./source/a/pcmciautils/cis-cs-3.2.8.tar.gz +drwxr-xr-x 2 root root 4096 2008-09-12 04:35 ./source/a/pcmciautils/config +-rw-r--r-- 1 root root 926 2007-03-16 20:00 ./source/a/pcmciautils/config/60-pcmcia.rules +-rw-r--r-- 1 root root 2577 2008-03-05 03:14 ./source/a/pcmciautils/config/config.opts +-rwxr-xr-x 1 root root 1722 2007-03-16 21:09 ./source/a/pcmciautils/config/rc.pcmcia +-rw-r--r-- 1 root root 277 2009-04-14 04:38 ./source/a/pcmciautils/doinst.sh.gz +-rw-r--r-- 1 root root 43239 2008-07-15 04:16 ./source/a/pcmciautils/pcmciautils-015.tar.bz2 +-rwxr-xr-x 1 root root 3555 2009-05-19 20:05 ./source/a/pcmciautils/pcmciautils.SlackBuild +-rw-r--r-- 1 root root 914 2009-04-14 04:35 ./source/a/pcmciautils/slack-desc +drwxr-xr-x 5 root root 4096 2009-05-19 20:05 ./source/a/pkgtools +drwxr-xr-x 2 root root 4096 2009-04-11 21:15 ./source/a/pkgtools/manpages +-rw-r--r-- 1 root root 1256 2009-04-11 20:54 ./source/a/pkgtools/manpages/explodepkg.8 +-rw-r--r-- 1 root root 2561 2009-04-11 20:52 ./source/a/pkgtools/manpages/installpkg.8 +-rw-r--r-- 1 root root 4557 2009-04-11 20:51 ./source/a/pkgtools/manpages/makepkg.8 +-rw-r--r-- 1 root root 2518 2009-04-11 21:11 ./source/a/pkgtools/manpages/pkgtool.8 +-rw-r--r-- 1 root root 3080 2009-04-11 21:15 ./source/a/pkgtools/manpages/removepkg.8 +-rw-r--r-- 1 root root 3199 2001-06-07 08:29 ./source/a/pkgtools/manpages/setup.8-deprecated +-rw-r--r-- 1 root root 2665 2009-04-11 21:14 ./source/a/pkgtools/manpages/upgradepkg.8 +drwxr-xr-x 2 root root 4096 2008-04-19 23:44 ./source/a/pkgtools/obsolete-scripts +-rw-r--r-- 1 root root 155 2008-04-19 23:44 ./source/a/pkgtools/obsolete-scripts/README +-rw-r--r-- 1 root root 1326 2003-02-16 00:57 ./source/a/pkgtools/obsolete-scripts/setup.90.modem-device +-rwxr-xr-x 1 root root 2489 2010-05-11 16:49 ./source/a/pkgtools/pkgtools.SlackBuild +drwxr-xr-x 2 root root 4096 2009-06-02 04:12 ./source/a/pkgtools/scripts +-rw-r--r-- 1 root root 3169 2010-05-11 16:38 ./source/a/pkgtools/scripts/explodepkg +-rw-r--r-- 1 root root 19653 2009-08-16 21:22 ./source/a/pkgtools/scripts/installpkg +-rw-r--r-- 1 root root 13749 2009-04-06 02:14 ./source/a/pkgtools/scripts/makebootdisk +-rw-r--r-- 1 root root 11315 2009-06-02 04:12 ./source/a/pkgtools/scripts/makepkg +-rw-r--r-- 1 root root 22621 2010-05-11 16:31 ./source/a/pkgtools/scripts/pkgtool +-rw-r--r-- 1 root root 14048 2009-04-28 20:44 ./source/a/pkgtools/scripts/removepkg +-rw-r--r-- 1 root root 170 2003-02-16 00:56 ./source/a/pkgtools/scripts/setup.70.install-kernel +-rw-r--r-- 1 root root 6356 2008-03-18 19:39 ./source/a/pkgtools/scripts/setup.80.make-bootdisk +-rw-r--r-- 1 root root 1070 2007-06-27 00:28 ./source/a/pkgtools/scripts/setup.htmlview +-rw-r--r-- 1 root root 7421 2008-03-19 08:13 ./source/a/pkgtools/scripts/setup.services +-rw-r--r-- 1 root root 12135 2010-05-11 16:41 ./source/a/pkgtools/scripts/upgradepkg +-rw-r--r-- 1 root root 1083 2002-03-23 04:15 ./source/a/pkgtools/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/a/procps +-rw-r--r-- 1 root root 24365 2001-03-02 18:54 ./source/a/procps/procinfo-18.tar.gz +-rw-r--r-- 1 root root 213 2003-02-07 21:39 ./source/a/procps/procinfo.gcc3.diff.gz +-rw-r--r-- 1 root root 504 2001-03-02 18:54 ./source/a/procps/procinfo.lsm +-rw-r--r-- 1 root root 824 2008-09-19 19:04 ./source/a/procps/procps-3.2.7-ps-eip64.diff.gz +-rw-r--r-- 1 root root 281965 2006-06-25 06:14 ./source/a/procps/procps-3.2.7.tar.gz +-rwxr-xr-x 1 root root 6216 2009-05-23 00:41 ./source/a/procps/procps.SlackBuild +-rw-r--r-- 1 root root 854 2004-08-17 01:30 ./source/a/procps/procps.nowarning.diff.gz +-rw-r--r-- 1 root root 182 2003-02-02 19:47 ./source/a/procps/procps.w.showfrom.diff.gz +-rw-r--r-- 1 root root 257325 2006-09-14 23:06 ./source/a/procps/psmisc-22.3.tar.gz +-rw-r--r-- 1 root root 739 2004-05-27 21:01 ./source/a/procps/slack-desc +drwxr-xr-x 2 root root 4096 2009-06-22 20:00 ./source/a/quota +-rw-r--r-- 1 root root 216356 2009-01-05 14:29 ./source/a/quota/quota-3.17.tar.xz +-rwxr-xr-x 1 root root 3539 2009-06-22 19:58 ./source/a/quota/quota.SlackBuild +-rw-r--r-- 1 root root 980 2002-03-31 08:30 ./source/a/quota/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/reiserfsprogs +-rw-r--r-- 1 root root 324847 2009-01-12 22:13 ./source/a/reiserfsprogs/reiserfsprogs-3.6.21.tar.bz2 +-rwxr-xr-x 1 root root 3507 2009-05-19 20:05 ./source/a/reiserfsprogs/reiserfsprogs.SlackBuild +-rw-r--r-- 1 root root 940 2008-02-11 03:44 ./source/a/reiserfsprogs/slack-desc +drwxr-xr-x 3 root root 4096 2010-04-30 22:39 ./source/a/rpm2tgz +-rw-r--r-- 1 root root 1809 2002-11-27 21:47 ./source/a/rpm2tgz/getrpmtype.tar.gz +drwxr-xr-x 2 root root 4096 2010-04-30 22:39 ./source/a/rpm2tgz/patches +-rw-r--r-- 1 root root 567 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0001-fix-d-handling.patch.gz +-rw-r--r-- 1 root root 651 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0002-fix-spurious-path-to-rpm-file-with-n-option.patch.gz +-rw-r--r-- 1 root root 521 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0003-allow-every-user-to-use-rpm2tgz.patch.gz +-rw-r--r-- 1 root root 707 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0004-produce-more-compliant-slack-desc.patch.gz +-rw-r--r-- 1 root root 792 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0005-gzip-man-info-pages.patch.gz +-rw-r--r-- 1 root root 755 2010-04-30 22:32 ./source/a/rpm2tgz/patches/0006-should-we-use-.txz-format-in-slackware-current.patch.gz +-rw-r--r-- 1 root root 7333 2010-02-18 02:37 ./source/a/rpm2tgz/rpm2targz +-rw-r--r-- 1 root root 986 2006-12-23 06:51 ./source/a/rpm2tgz/rpm2targz.README +-rwxr-xr-x 1 root root 3353 2010-04-30 22:47 ./source/a/rpm2tgz/rpm2tgz.SlackBuild +-rw-r--r-- 1 root root 854 2010-02-23 21:02 ./source/a/rpm2tgz/rpmoffset.c +-rw-r--r-- 1 root root 856 2008-02-11 03:44 ./source/a/rpm2tgz/slack-desc +drwxr-xr-x 2 root root 4096 2009-10-19 05:44 ./source/a/sdparm +-rw-r--r-- 1 root root 226379 2009-10-03 05:04 ./source/a/sdparm/sdparm-1.04.tar.bz2 +-rwxr-xr-x 1 root root 3879 2010-02-12 02:13 ./source/a/sdparm/sdparm.SlackBuild +-rw-r--r-- 1 root root 924 2007-06-02 18:27 ./source/a/sdparm/slack-desc +drwxr-xr-x 2 root root 4096 2009-12-06 02:13 ./source/a/sed +-rw-r--r-- 1 root root 728284 2009-06-29 06:39 ./source/a/sed/sed-4.2.1.tar.xz +-rwxr-xr-x 1 root root 3342 2009-12-06 02:15 ./source/a/sed/sed.SlackBuild +-rw-r--r-- 1 root root 862 2009-05-30 01:41 ./source/a/sed/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-28 20:14 ./source/a/shadow +-rw-r--r-- 1 root root 15616 2010-01-13 15:22 ./source/a/shadow/adduser +-rw-r--r-- 1 root root 290 2010-01-28 01:29 ./source/a/shadow/doinst.sh.gz +-rw-r--r-- 1 root root 4551 2010-01-28 01:35 ./source/a/shadow/login.defs.gz +-rw-r--r-- 1 root root 1295980 2009-07-24 03:08 ./source/a/shadow/shadow-4.1.4.2.tar.xz +-rwxr-xr-x 1 root root 4425 2010-02-28 20:15 ./source/a/shadow/shadow.SlackBuild +-rw-r--r-- 1 root root 993 2002-04-30 23:51 ./source/a/shadow/slack-desc +-rw-r--r-- 1 root root 142 2010-02-28 20:14 ./source/a/shadow/useradd.gz +drwxr-xr-x 2 root root 4096 2009-06-22 18:47 ./source/a/sharutils +-rw-r--r-- 1 root root 640932 2007-07-01 12:05 ./source/a/sharutils/sharutils-4.7.tar.bz2 +-rw-r--r-- 1 root root 65 2007-07-01 12:05 ./source/a/sharutils/sharutils-4.7.tar.bz2.sig +-rwxr-xr-x 1 root root 2632 2009-06-22 18:50 ./source/a/sharutils/sharutils.SlackBuild +-rw-r--r-- 1 root root 1087 2006-05-19 01:57 ./source/a/sharutils/slack-desc +drwxr-xr-x 2 root root 4096 2009-06-30 19:16 ./source/a/slocate +-rw-r--r-- 1 root root 941 2009-07-18 00:05 ./source/a/slocate/_slocate.tar.gz +-rw-r--r-- 1 root root 1011 2002-04-07 09:50 ./source/a/slocate/slack-desc +-rw-r--r-- 1 root root 37748 2006-03-08 05:05 ./source/a/slocate/slocate-3.1.tar.gz +-rw-r--r-- 1 root root 189 2006-03-08 05:05 ./source/a/slocate/slocate-3.1.tar.gz.sign +-rwxr-xr-x 1 root root 2430 2009-07-18 00:43 ./source/a/slocate/slocate.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-25 23:29 ./source/a/smartmontools +-rw-r--r-- 1 root root 270 2004-04-12 02:03 ./source/a/smartmontools/doinst.sh.gz +-rw-r--r-- 1 root root 1174 2002-10-21 22:55 ./source/a/smartmontools/slack-desc +-rw-r--r-- 1 root root 481648 2010-01-28 20:49 ./source/a/smartmontools/smartmontools-5.39.1.tar.xz +-rwxr-xr-x 1 root root 3011 2010-04-25 23:34 ./source/a/smartmontools/smartmontools.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/splitvt +-rw-r--r-- 1 root root 743 2006-12-13 23:26 ./source/a/splitvt/slack-desc +-rw-r--r-- 1 root root 64301 2001-01-18 07:58 ./source/a/splitvt/splitvt-1.6.5.tar.gz +-rwxr-xr-x 1 root root 2281 2009-05-19 20:05 ./source/a/splitvt/splitvt.SlackBuild +-rw-r--r-- 1 root root 10403 2005-07-19 22:17 ./source/a/splitvt/splitvt_1.6.5-9.diff.gz +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sysfsutils +-rw-r--r-- 1 root root 1005 2006-08-03 23:45 ./source/a/sysfsutils/slack-desc +-rw-r--r-- 1 root root 288189 2006-12-12 01:33 ./source/a/sysfsutils/sysfsutils-2.1.0.tar.bz2 +-rwxr-xr-x 1 root root 3195 2009-05-19 20:05 ./source/a/sysfsutils/sysfsutils.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sysklogd +-rw-r--r-- 1 root root 2289 2007-04-09 23:11 ./source/a/sysklogd/_sysklogd.tar.gz +-rw-r--r-- 1 root root 916 2002-03-23 22:05 ./source/a/sysklogd/slack-desc +-rw-r--r-- 1 root root 862 2007-04-09 23:25 ./source/a/sysklogd/sysklogd-1.4.1-owl-syslogd-crunch_list.diff.gz +-rw-r--r-- 1 root root 1197 2001-03-11 21:33 ./source/a/sysklogd/sysklogd-1.4.1.lsm +-rw-r--r-- 1 root root 81784 2001-03-11 21:33 ./source/a/sysklogd/sysklogd-1.4.1.tar.gz +-rwxr-xr-x 1 root root 2850 2009-05-19 20:05 ./source/a/sysklogd/sysklogd.SlackBuild +-rw-r--r-- 1 root root 26587 2006-09-28 21:52 ./source/a/sysklogd/sysklogd_1.4.1-20.diff.gz +drwxr-xr-x 2 root root 4096 2010-01-25 20:32 ./source/a/syslinux +-rw-r--r-- 1 root root 977 2002-03-22 08:06 ./source/a/syslinux/slack-desc +-rw-r--r-- 1 root root 3383248 2009-12-18 23:36 ./source/a/syslinux/syslinux-3.84.tar.bz2 +-rw-r--r-- 1 root root 248 2009-12-18 23:36 ./source/a/syslinux/syslinux-3.84.tar.bz2.sign +-rwxr-xr-x 1 root root 3103 2010-01-25 20:34 ./source/a/syslinux/syslinux.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sysvinit +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/sysvinit-functions +-rw-r--r-- 1 root root 832 2007-04-29 18:51 ./source/a/sysvinit-functions/README.functions +-rw-r--r-- 1 root root 226 2007-05-15 02:38 ./source/a/sysvinit-functions/doinst.sh.gz +-rw-r--r-- 1 root root 10001 2007-04-29 18:21 ./source/a/sysvinit-functions/function-src-8.53.tar.bz2 +-rw-r--r-- 1 root root 13913 2006-10-26 20:57 ./source/a/sysvinit-functions/functions +-rw-r--r-- 1 root root 1164 2007-05-15 02:46 ./source/a/sysvinit-functions/slack-desc +-rwxr-xr-x 1 root root 3054 2009-05-19 20:05 ./source/a/sysvinit-functions/sysvinit-functions.SlackBuild +drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/a/sysvinit-scripts +-rw-r--r-- 1 root root 339 2008-03-19 08:28 ./source/a/sysvinit-scripts/doinst.sh.gz +drwxr-xr-x 2 root root 4096 2008-03-31 03:07 ./source/a/sysvinit-scripts/scripts +-rw-r--r-- 1 root root 60 2006-08-01 03:00 ./source/a/sysvinit-scripts/scripts/fetch-rescan-scsi-bus.sh +-rw-r--r-- 1 root root 2467 2006-07-26 23:41 ./source/a/sysvinit-scripts/scripts/inittab +-rw-r--r-- 1 root root 1282 2007-03-27 01:12 ./source/a/sysvinit-scripts/scripts/rc.4 +-rw-r--r-- 1 root root 7425 2010-03-20 00:14 ./source/a/sysvinit-scripts/scripts/rc.6 +-rw-r--r-- 1 root root 2425 2008-12-02 20:31 ./source/a/sysvinit-scripts/scripts/rc.K +-rw-r--r-- 1 root root 10904 2010-02-07 03:01 ./source/a/sysvinit-scripts/scripts/rc.M +-rw-r--r-- 1 root root 14238 2010-03-20 00:14 ./source/a/sysvinit-scripts/scripts/rc.S +-rw-r--r-- 1 root root 272 2006-08-12 02:07 ./source/a/sysvinit-scripts/scripts/rc.local +-rw-r--r-- 1 root root 1740 1999-09-11 20:48 ./source/a/sysvinit-scripts/scripts/rc.sysvinit +-rw-r--r-- 1 root root 15654 2008-10-29 10:07 ./source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh +-rw-r--r-- 1 root root 846 2007-05-15 02:47 ./source/a/sysvinit-scripts/slack-desc +-rwxr-xr-x 1 root root 2177 2010-03-20 00:13 ./source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild +-rw-r--r-- 1 root root 681 2007-04-16 19:42 ./source/a/sysvinit/doinst.sh.gz +-rw-r--r-- 1 root root 972 2002-03-22 05:59 ./source/a/sysvinit/slack-desc +-rw-r--r-- 1 root root 489 2008-09-22 09:55 ./source/a/sysvinit/sysvinit-2.86-timeval.patch.gz +-rw-r--r-- 1 root root 99009 2006-12-08 20:10 ./source/a/sysvinit/sysvinit-2.86.tar.gz +-rwxr-xr-x 1 root root 3836 2009-05-19 20:05 ./source/a/sysvinit/sysvinit.SlackBuild +-rw-r--r-- 1 root root 1729 2008-04-03 02:33 ./source/a/sysvinit/sysvinit.diff.gz +-rw-r--r-- 1 root root 1107 2005-12-19 21:12 ./source/a/sysvinit/sysvinit.pidof.rhforkseverything.diff.gz +drwxr-xr-x 2 root root 4096 2010-03-16 05:11 ./source/a/tar +-rw-r--r-- 1 root root 2429 1995-01-07 08:18 ./source/a/tar/rmt.8.gz +-rw-r--r-- 1 root root 834 2002-03-23 22:06 ./source/a/tar/slack-desc +-rw-r--r-- 1 root root 949 2006-11-30 21:52 ./source/a/tar/tar-1.13.bzip2.diff.gz +-rw-r--r-- 1 root root 1052531 1999-07-08 05:50 ./source/a/tar/tar-1.13.tar.gz +-rw-r--r-- 1 root root 230 2010-03-16 05:10 ./source/a/tar/tar-1.23-support_txz.diff.gz +-rw-r--r-- 1 root root 1647108 2010-03-10 12:14 ./source/a/tar/tar-1.23.tar.xz +-rw-r--r-- 1 root root 2676 2002-02-22 03:24 ./source/a/tar/tar.1.gz +-rwxr-xr-x 1 root root 4820 2010-03-16 14:49 ./source/a/tar/tar.SlackBuild +-rw-r--r-- 1 root root 563 2010-03-16 04:46 ./source/a/tar/tar.nolonezero.diff.gz +-rw-r--r-- 1 root root 377 2010-03-16 04:47 ./source/a/tar/tar.norecordsizespam.diff.gz +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/tcsh +-rw-r--r-- 1 root root 146 1995-08-06 23:12 ./source/a/tcsh/doinst.sh.gz +-rw-r--r-- 1 root root 886 2002-03-23 22:06 ./source/a/tcsh/slack-desc +-rw-r--r-- 1 root root 727440 2007-03-03 20:08 ./source/a/tcsh/tcsh-6.15.00.tar.bz2 +-rwxr-xr-x 1 root root 3004 2009-05-19 20:05 ./source/a/tcsh/tcsh.SlackBuild +-rw-r--r-- 1 root root 202 2006-02-09 20:33 ./source/a/tcsh/tcsh.nobuiltincolorls.diff.gz +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/time +-rw-r--r-- 1 root root 887 2008-02-11 03:44 ./source/a/time/slack-desc +-rw-r--r-- 1 root root 103066 1996-07-11 15:08 ./source/a/time/time-1.7.tar.gz +-rwxr-xr-x 1 root root 2263 2009-05-19 20:05 ./source/a/time/time.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/tree +-rw-r--r-- 1 root root 873 2006-12-23 06:19 ./source/a/tree/slack-desc +-rw-r--r-- 1 root root 31732 2009-01-22 15:17 ./source/a/tree/tree-1.5.2.2.tar.bz2 +-rwxr-xr-x 1 root root 2260 2009-05-19 20:05 ./source/a/tree/tree.SlackBuild +drwxr-xr-x 3 root root 4096 2010-04-21 14:18 ./source/a/udev +drwxr-xr-x 6 root root 4096 2009-08-14 14:06 ./source/a/udev/config +drwxr-xr-x 2 root root 4096 2009-08-14 14:06 ./source/a/udev/config/modprobe.d +-rw-r--r-- 1 root root 6251 2009-08-14 14:06 ./source/a/udev/config/modprobe.d/blacklist.conf.new +-rw-r--r-- 1 root root 443 2009-05-30 01:25 ./source/a/udev/config/modprobe.d/isapnp.conf.new +-rw-r--r-- 1 root root 265 2009-08-14 14:04 ./source/a/udev/config/modprobe.d/psmouse.conf.new +-rw-r--r-- 1 root root 244 2009-05-30 01:25 ./source/a/udev/config/modprobe.d/usb-controller.conf.new +drwxr-xr-x 2 root root 4096 2010-01-14 04:32 ./source/a/udev/config/rc.d +-rw-r--r-- 1 root root 5380 2010-04-20 15:18 ./source/a/udev/config/rc.d/rc.udev.new +drwxr-xr-x 2 root root 4096 2009-12-02 14:17 ./source/a/udev/config/rules.d +-rw-r--r-- 1 root root 444 2009-11-25 07:13 ./source/a/udev/config/rules.d/40-slackware.rules +-rw-r--r-- 1 root root 1847 2010-04-20 15:28 ./source/a/udev/config/rules.d/59-non-libata-devices.rules +-rw-r--r-- 1 root root 1380 2010-04-20 15:25 ./source/a/udev/config/rules.d/65-permissions.rules +-rw-r--r-- 1 root root 305 2009-05-30 01:25 ./source/a/udev/config/rules.d/90-network.rules +drwxr-xr-x 2 root root 4096 2009-05-30 01:25 ./source/a/udev/config/scripts +-rwxr-xr-x 1 root root 1978 2009-05-30 01:25 ./source/a/udev/config/scripts/nethelper.sh +-rw-r--r-- 1 root root 485 2009-05-30 01:25 ./source/a/udev/config/udev.conf +-rw-r--r-- 1 root root 555 2009-05-30 01:25 ./source/a/udev/doinst.sh.gz +-rw-r--r-- 1 root root 782 2009-05-30 01:25 ./source/a/udev/rule_generator.diff.gz +-rw-r--r-- 1 root root 825 2009-05-30 01:25 ./source/a/udev/slack-desc +-rw-r--r-- 1 root root 248 2010-04-21 06:51 ./source/a/udev/udev-153.tar.sign +-rw-r--r-- 1 root root 448576 2010-04-21 06:51 ./source/a/udev/udev-153.tar.xz +-rw-r--r-- 1 root root 438 2009-11-25 23:25 ./source/a/udev/udev-fixed-devices.tar.gz +-rwxr-xr-x 1 root root 4668 2010-04-26 02:49 ./source/a/udev/udev.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/unarj +-rw-r--r-- 1 root root 269 2006-12-23 05:36 ./source/a/unarj/Makefile.gz +-rw-r--r-- 1 root root 848 2006-12-23 05:29 ./source/a/unarj/slack-desc +-rwxr-xr-x 1 root root 1993 2009-05-19 20:05 ./source/a/unarj/unarj.SlackBuild +-rw-r--r-- 1 root root 23151 2002-06-05 05:00 ./source/a/unarj/unarj265.tar.gz +drwxr-xr-x 2 root root 4096 2010-04-30 04:04 ./source/a/usb_modeswitch +-rw-r--r-- 1 root root 272 2010-04-30 04:03 ./source/a/usb_modeswitch/doinst.sh.gz +-rw-r--r-- 1 root root 1185 2010-04-30 03:24 ./source/a/usb_modeswitch/slack-desc +-rw-r--r-- 1 root root 35001 2010-04-18 14:01 ./source/a/usb_modeswitch/usb-modeswitch-1.1.2.tar.bz2 +-rw-r--r-- 1 root root 13967 2010-04-18 13:11 ./source/a/usb_modeswitch/usb-modeswitch-data-20100418.tar.bz2 +-rwxr-xr-x 1 root root 4145 2010-04-30 04:01 ./source/a/usb_modeswitch/usb_modeswitch.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-21 01:59 ./source/a/usbutils +-rw-r--r-- 1 root root 781 2009-05-30 01:47 ./source/a/usbutils/slack-desc +-rw-r--r-- 1 root root 224509 2010-03-18 00:54 ./source/a/usbutils/usbutils-0.87.tar.bz2 +-rwxr-xr-x 1 root root 4558 2010-03-21 01:59 ./source/a/usbutils/usbutils.SlackBuild +-rw-r--r-- 1 root root 220 2009-05-30 01:47 ./source/a/usbutils/usbutils.ids.dest.gz +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/utempter +-rw-r--r-- 1 root root 230 2006-12-12 23:47 ./source/a/utempter/doinst.sh.gz +-rw-r--r-- 1 root root 14583 2005-12-11 13:16 ./source/a/utempter/libutempter-1.1.4.tar.bz2 +-rw-r--r-- 1 root root 189 2005-12-12 12:56 ./source/a/utempter/libutempter-1.1.4.tar.bz2.asc +-rw-r--r-- 1 root root 809 2003-06-08 01:36 ./source/a/utempter/slack-desc +-rwxr-xr-x 1 root root 2843 2009-05-19 20:05 ./source/a/utempter/utempter.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-30 04:06 ./source/a/util-linux-ng +-rw-r--r-- 1 root root 43150 2009-05-30 01:25 ./source/a/util-linux-ng/adjtimex_1.23-1.diff.gz +-rw-r--r-- 1 root root 56580 2009-05-30 01:25 ./source/a/util-linux-ng/adjtimex_1.23.orig.tar.gz +-rw-r--r-- 1 root root 4513 2009-05-30 01:25 ./source/a/util-linux-ng/bsdstrings.tar.gz +-rw-r--r-- 1 root root 337 2009-05-30 01:25 ./source/a/util-linux-ng/doinst.sh.gz +-rw-r--r-- 1 root root 179192 2009-05-30 01:25 ./source/a/util-linux-ng/net-tools-1.60.tar.xz +-rw-r--r-- 1 root root 650 2009-05-30 01:25 ./source/a/util-linux-ng/net-tools.diff.gz +-rw-r--r-- 1 root root 173444 2009-05-30 01:25 ./source/a/util-linux-ng/net-tools_1.60-19.diff.gz +-rw-r--r-- 1 root root 1266 2009-05-30 01:25 ./source/a/util-linux-ng/scsi_ioctl.h +-rw-r--r-- 1 root root 52437 2009-05-30 01:25 ./source/a/util-linux-ng/setserial-2.17.tar.gz +-rw-r--r-- 1 root root 729 2009-05-30 01:25 ./source/a/util-linux-ng/setserial-rc.serial.diff.gz +-rw-r--r-- 1 root root 376 2010-03-30 04:06 ./source/a/util-linux-ng/setserial-undef_TIOCGHAYESESP.diff.gz +-rw-r--r-- 1 root root 904 2009-05-30 01:25 ./source/a/util-linux-ng/slack-desc +-rw-r--r-- 1 root root 2344032 2010-03-22 09:32 ./source/a/util-linux-ng/util-linux-ng-2.17.2.tar.xz +-rwxr-xr-x 1 root root 9368 2010-03-30 04:07 ./source/a/util-linux-ng/util-linux-ng.SlackBuild +-rw-r--r-- 1 root root 266 2009-05-30 01:25 ./source/a/util-linux-ng/util-linux-ng.fdisk-no-solaris.diff.gz +-rw-r--r-- 1 root root 10292 2009-05-30 01:25 ./source/a/util-linux-ng/ziptool-1.4.0.tar.xz +-rw-r--r-- 1 root root 386 2009-05-30 01:25 ./source/a/util-linux-ng/ziptool-fix_build.patch.gz +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/which +-rw-r--r-- 1 root root 1038 2006-12-14 02:00 ./source/a/which/slack-desc +-rw-r--r-- 1 root root 135372 2008-08-06 15:21 ./source/a/which/which-2.20.tar.gz +-rw-r--r-- 1 root root 152 2008-08-06 15:21 ./source/a/which/which-2.20.tar.gz.sig +-rwxr-xr-x 1 root root 2806 2009-05-19 20:05 ./source/a/which/which.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-09 21:07 ./source/a/xfsprogs +-rw-r--r-- 1 root root 954 2006-02-21 05:35 ./source/a/xfsprogs/slack-desc +-rw-r--r-- 1 root root 919784 2010-01-29 21:24 ./source/a/xfsprogs/xfsprogs-3.1.1.tar.xz +-rwxr-xr-x 1 root root 4499 2010-02-09 21:23 ./source/a/xfsprogs/xfsprogs.SlackBuild +drwxr-xr-x 2 root root 4096 2009-10-15 21:31 ./source/a/xz +-rw-r--r-- 1 root root 952 2009-04-08 00:19 ./source/a/xz/slack-desc +-rw-r--r-- 1 root root 849062 2009-10-15 21:30 ./source/a/xz/xz-4.999.9beta.tar.bz2 +-rwxr-xr-x 1 root root 4428 2009-11-24 00:24 ./source/a/xz/xz.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/a/zoo +-rw-r--r-- 1 root root 996 2006-12-14 01:08 ./source/a/zoo/slack-desc +-rw-r--r-- 1 root root 173607 1994-12-30 20:19 ./source/a/zoo/zoo-2.10.tar.gz +-rwxr-xr-x 1 root root 2565 2009-05-19 20:05 ./source/a/zoo/zoo.SlackBuild +-rw-r--r-- 1 root root 12333 2006-05-29 21:19 ./source/a/zoo/zoo_2.10-18.diff.gz +drwxr-xr-x 70 root root 4096 2010-05-10 02:36 ./source/ap +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/a2ps +-rw-r--r-- 1 root root 1814364 2007-12-29 03:53 ./source/ap/a2ps/a2ps-4.14.tar.bz2 +-rwxr-xr-x 1 root root 4858 2009-05-23 00:41 ./source/ap/a2ps/a2ps.SlackBuild +-rw-r--r-- 1 root root 298 2009-03-31 01:11 ./source/ap/a2ps/a2ps.a2ps_cfg.in.diff.gz +-rw-r--r-- 1 root root 249 2001-01-19 05:15 ./source/ap/a2ps/a2ps.diff.gz +-rw-r--r-- 1 root root 62039 1997-08-28 13:11 ./source/ap/a2ps/psutils-1.17.tar.gz +-rw-r--r-- 1 root root 574 2009-03-04 01:22 ./source/ap/a2ps/psutils.destdir.diff.gz +-rw-r--r-- 1 root root 471 2001-01-19 04:54 ./source/ap/a2ps/psutils.diff.gz +-rw-r--r-- 1 root root 900 2002-03-29 03:05 ./source/ap/a2ps/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/acct +-rw-r--r-- 1 root root 23954 2008-03-08 08:47 ./source/ap/acct/acct-6.4pre1-6.diff.gz +-rw-r--r-- 1 root root 261410 2006-11-04 12:47 ./source/ap/acct/acct-6.4pre1.tar.bz2 +-rwxr-xr-x 1 root root 4051 2009-05-19 20:05 ./source/ap/acct/acct.SlackBuild +-rw-r--r-- 1 root root 309 2008-11-12 18:52 ./source/ap/acct/acct.logdir.fhs.diff.gz +-rw-r--r-- 1 root root 1054 2008-11-12 20:20 ./source/ap/acct/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-20 02:43 ./source/ap/alsa-utils +-rw-r--r-- 1 root root 1076937 2010-04-16 11:22 ./source/ap/alsa-utils/alsa-utils-1.0.23.tar.bz2 +-rwxr-xr-x 1 root root 4020 2010-02-07 19:09 ./source/ap/alsa-utils/alsa-utils.SlackBuild +-rw-r--r-- 1 root root 1027 2009-11-12 05:45 ./source/ap/alsa-utils/alsa-utils.alsaconf.diff.gz +-rw-r--r-- 1 root root 1090 2008-12-03 01:49 ./source/ap/alsa-utils/rc.alsa.gz +-rw-r--r-- 1 root root 1086 2003-08-29 06:09 ./source/ap/alsa-utils/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/amp +-rw-r--r-- 1 root root 236 2002-02-24 19:46 ./source/ap/amp/_amp.tar.gz +-rw-r--r-- 1 root root 100337 1999-03-17 18:11 ./source/ap/amp/amp-0.7.6.tar.gz +-rw-r--r-- 1 root root 239 2008-10-01 07:38 ./source/ap/amp/amp-gcc34.diff.gz +-rwxr-xr-x 1 root root 2004 2009-05-19 20:05 ./source/ap/amp/amp.SlackBuild +-rw-r--r-- 1 root root 1514 1999-03-17 18:33 ./source/ap/amp/license_excerpts +-rw-r--r-- 1 root root 729 2002-03-29 01:09 ./source/ap/amp/slack-desc +drwxr-xr-x 3 root root 4096 2010-04-25 21:36 ./source/ap/ash +-rw-r--r-- 1 root root 121233 2001-01-12 16:50 ./source/ap/ash/ash-0.4.0.tar.gz +-rwxr-xr-x 1 root root 3066 2010-04-25 21:36 ./source/ap/ash/ash.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-25 21:34 ./source/ap/ash/patches +-rw-r--r-- 1 root root 6275 2002-06-02 18:57 ./source/ap/ash/patches/ash-builtin.patch.gz +-rw-r--r-- 1 root root 6506 2002-06-02 18:57 ./source/ap/ash/patches/ash-debian.patch.gz +-rw-r--r-- 1 root root 832 2002-06-02 18:57 ./source/ap/ash/patches/ash-echo.patch.gz +-rw-r--r-- 1 root root 707 2002-06-02 18:57 ./source/ap/ash/patches/ash-freebsd.patch.gz +-rw-r--r-- 1 root root 312 2002-06-02 18:57 ./source/ap/ash/patches/ash-getcwd.patch.gz +-rw-r--r-- 1 root root 1585 2002-06-02 18:57 ./source/ap/ash/patches/ash-getopt.patch.gz +-rw-r--r-- 1 root root 2937 2002-06-02 18:57 ./source/ap/ash/patches/ash-glob.patch.gz +-rw-r--r-- 1 root root 4556 2010-04-25 21:34 ./source/ap/ash/patches/ash-hetio.patch.gz +-rw-r--r-- 1 root root 1004 2002-06-02 18:57 ./source/ap/ash/patches/ash-jobs.patch.gz +-rw-r--r-- 1 root root 5625 2002-06-02 18:57 ./source/ap/ash/patches/ash-kill.patch.gz +-rw-r--r-- 1 root root 1338 2002-06-02 18:57 ./source/ap/ash/patches/ash-makefile.patch.gz +-rw-r--r-- 1 root root 718 2002-06-02 18:57 ./source/ap/ash/patches/ash-manpage.patch.gz +-rw-r--r-- 1 root root 2357 2002-06-02 18:57 ./source/ap/ash/patches/ash-memout.patch.gz +-rw-r--r-- 1 root root 1499 2002-06-02 18:57 ./source/ap/ash/patches/ash-misc.patch.gz +-rw-r--r-- 1 root root 388 2002-06-02 18:57 ./source/ap/ash/patches/ash-ppid.patch.gz +-rw-r--r-- 1 root root 3928 2002-06-02 18:57 ./source/ap/ash/patches/ash-redir.patch.gz +-rw-r--r-- 1 root root 4570 2002-06-02 18:57 ./source/ap/ash/patches/ash-setmode.patch.gz +-rw-r--r-- 1 root root 261 2002-06-02 18:57 ./source/ap/ash/patches/ash-sighup.patch.gz +-rw-r--r-- 1 root root 2215 2002-06-02 18:57 ./source/ap/ash/patches/ash-syntax.patch.gz +-rw-r--r-- 1 root root 3668 2002-06-02 18:57 ./source/ap/ash/patches/ash-test.patch.gz +-rw-r--r-- 1 root root 585 2002-06-02 18:57 ./source/ap/ash/patches/ash-times.patch.gz +-rw-r--r-- 1 root root 979 2002-06-02 19:04 ./source/ap/ash/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/at +-rw-r--r-- 1 root root 86817 2006-01-03 07:32 ./source/ap/at/at-3.1.10.tar.bz2 +-rwxr-xr-x 1 root root 3083 2009-05-19 20:05 ./source/ap/at/at.SlackBuild +-rw-r--r-- 1 root root 414 2006-08-03 00:45 ./source/ap/at/doinst.sh.gz +-rw-r--r-- 1 root root 737 2003-11-23 18:46 ./source/ap/at/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/aumix +-rw-r--r-- 1 root root 157503 2002-11-25 01:36 ./source/ap/aumix/aumix-2.8.tar.bz2 +-rwxr-xr-x 1 root root 2149 2009-05-23 00:41 ./source/ap/aumix/aumix.SlackBuild +-rw-r--r-- 1 root root 609 2003-08-29 06:17 ./source/ap/aumix/aumix.alsa.diff.gz +-rw-r--r-- 1 root root 764 2002-06-05 04:41 ./source/ap/aumix/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/bc +-rw-r--r-- 1 root root 290069 2006-09-05 02:43 ./source/ap/bc/bc-1.06.95.tar.bz2 +-rw-r--r-- 1 root root 184 2006-09-05 02:43 ./source/ap/bc/bc-1.06.95.tar.bz2.sig +-rwxr-xr-x 1 root root 3270 2009-05-23 00:41 ./source/ap/bc/bc.SlackBuild +-rw-r--r-- 1 root root 839 2002-05-13 17:58 ./source/ap/bc/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/bpe +-rw-r--r-- 1 root root 115498 2001-01-02 06:38 ./source/ap/bpe/bpe-2.01.00.tar.gz +-rwxr-xr-x 1 root root 2200 2009-05-23 00:41 ./source/ap/bpe/bpe.SlackBuild +-rw-r--r-- 1 root root 789 2004-06-06 22:28 ./source/ap/bpe/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/cdparanoia +-rw-r--r-- 1 root root 183236 2008-09-11 21:36 ./source/ap/cdparanoia/cdparanoia-III-10.2.src.tar.gz +-rw-r--r-- 1 root root 3327 2008-10-19 15:49 ./source/ap/cdparanoia/cdparanoia-III-10.2_cdda_private.patch.gz +-rwxr-xr-x 1 root root 3882 2009-05-19 20:05 ./source/ap/cdparanoia/cdparanoia.SlackBuild +-rw-r--r-- 1 root root 1056 2007-11-17 04:37 ./source/ap/cdparanoia/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/cdrdao +-rw-r--r-- 1 root root 1384615 2005-11-24 07:55 ./source/ap/cdrdao/cdrdao-1.2.1.tar.bz2 +-rwxr-xr-x 1 root root 2536 2009-05-19 20:05 ./source/ap/cdrdao/cdrdao.SlackBuild +-rw-r--r-- 1 root root 753 2002-03-23 22:15 ./source/ap/cdrdao/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-28 19:28 ./source/ap/cdrtools +-rw-r--r-- 1 root root 1928976 2010-04-27 10:05 ./source/ap/cdrtools/cdrtools-2.01.01a78.tar.bz2 +-rwxr-xr-x 1 root root 5488 2010-02-06 01:53 ./source/ap/cdrtools/cdrtools.SlackBuild +-rw-r--r-- 1 root root 269 2009-12-29 03:13 ./source/ap/cdrtools/doinst.sh.gz +-rw-r--r-- 1 root root 868 2008-02-11 03:44 ./source/ap/cdrtools/slack-desc +-rw-r--r-- 1 root root 52968 2007-05-17 05:50 ./source/ap/cdrtools/zisofs-tools-1.0.8.tar.bz2 +-rw-r--r-- 1 root root 248 2007-05-17 05:50 ./source/ap/cdrtools/zisofs-tools-1.0.8.tar.bz2.sign +drwxr-xr-x 2 root root 4096 2009-07-22 21:58 ./source/ap/dc3dd +-rw-r--r-- 1 root root 2138588 2009-03-19 19:59 ./source/ap/dc3dd/dc3dd-6.12.3.tar.xz +-rwxr-xr-x 1 root root 2910 2009-07-22 22:07 ./source/ap/dc3dd/dc3dd.SlackBuild +-rw-r--r-- 1 root root 913 2009-02-14 22:30 ./source/ap/dc3dd/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/diffstat +-rw-r--r-- 1 root root 88470 2006-07-17 00:14 ./source/ap/diffstat/diffstat-1.43.tar.bz2 +-rwxr-xr-x 1 root root 3016 2009-05-19 20:05 ./source/ap/diffstat/diffstat.SlackBuild +-rw-r--r-- 1 root root 868 2006-09-20 05:07 ./source/ap/diffstat/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-10 01:14 ./source/ap/diffutils +-rw-r--r-- 1 root root 1023932 2010-05-03 16:59 ./source/ap/diffutils/diffutils-3.0.tar.xz +-rw-r--r-- 1 root root 373 2010-02-14 08:28 ./source/ap/diffutils/diffutils-sdiff-no-waitpid.patch.gz +-rwxr-xr-x 1 root root 3803 2010-05-10 01:14 ./source/ap/diffutils/diffutils.SlackBuild +-rw-r--r-- 1 root root 321 2006-08-21 02:46 ./source/ap/diffutils/doinst.sh.gz +-rw-r--r-- 1 root root 743 2002-03-23 22:17 ./source/ap/diffutils/slack-desc +drwxr-xr-x 2 root root 4096 2009-06-13 04:41 ./source/ap/dmapi +-rw-r--r-- 1 root root 196416 2009-05-05 17:24 ./source/ap/dmapi/dmapi-2.2.10.tar.xz +-rwxr-xr-x 1 root root 3523 2009-06-13 04:42 ./source/ap/dmapi/dmapi.SlackBuild +-rw-r--r-- 1 root root 526 2008-04-01 05:05 ./source/ap/dmapi/dmapi.destdir.diff.gz +-rw-r--r-- 1 root root 804 2006-02-21 05:56 ./source/ap/dmapi/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/dmidecode +-rw-r--r-- 1 root root 51904 2008-11-23 20:56 ./source/ap/dmidecode/dmidecode-2.10.tar.bz2 +-rw-r--r-- 1 root root 65 2008-11-23 20:56 ./source/ap/dmidecode/dmidecode-2.10.tar.bz2.sig +-rwxr-xr-x 1 root root 2905 2009-05-19 20:05 ./source/ap/dmidecode/dmidecode.SlackBuild +-rw-r--r-- 1 root root 215 2007-05-02 19:54 ./source/ap/dmidecode/dmidecode.makefile.diff.gz +-rw-r--r-- 1 root root 933 2007-05-02 20:04 ./source/ap/dmidecode/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/dvd+rw-tools +-rw-r--r-- 1 root root 140846 2008-03-05 08:44 ./source/ap/dvd+rw-tools/dvd+rw-tools-7.1.tar.gz +-rwxr-xr-x 1 root root 2462 2009-05-19 20:05 ./source/ap/dvd+rw-tools/dvd+rw-tools.SlackBuild +-rw-r--r-- 1 root root 185 2008-04-07 04:06 ./source/ap/dvd+rw-tools/dvd+rw-tools.limits.h.diff.gz +-rw-r--r-- 1 root root 49 2003-09-02 03:20 ./source/ap/dvd+rw-tools/dvd+rw-tools.url +-rw-r--r-- 1 root root 823 2008-02-11 03:44 ./source/ap/dvd+rw-tools/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/enscript +-rw-r--r-- 1 root root 814308 2002-01-24 07:39 ./source/ap/enscript/enscript-1.6.3.tar.gz +-rwxr-xr-x 1 root root 2878 2009-05-19 20:05 ./source/ap/enscript/enscript.SlackBuild +-rw-r--r-- 1 root root 920 2002-03-23 22:26 ./source/ap/enscript/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/flac +-rw-r--r-- 1 root root 1459486 2007-09-18 20:12 ./source/ap/flac/flac-1.2.1.tar.bz2 +-rwxr-xr-x 1 root root 3497 2009-05-19 20:05 ./source/ap/flac/flac.SlackBuild +-rw-r--r-- 1 root root 371 2008-03-08 21:48 ./source/ap/flac/flac.man.diff.gz +-rw-r--r-- 1 root root 1058 2002-08-26 19:03 ./source/ap/flac/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-16 08:53 ./source/ap/foomatic-filters +-rw-r--r-- 1 root root 275 2007-09-26 20:11 ./source/ap/foomatic-filters/doinst.sh.gz +-rw-r--r-- 1 root root 241279 2010-02-15 12:57 ./source/ap/foomatic-filters/foomatic-filters-4.0.4.tar.gz +-rwxr-xr-x 1 root root 4353 2010-02-16 08:54 ./source/ap/foomatic-filters/foomatic-filters.SlackBuild +-rw-r--r-- 1 root root 1104 2008-02-11 03:44 ./source/ap/foomatic-filters/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-25 21:08 ./source/ap/ghostscript +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/ghostscript-fonts-std +-rw-r--r-- 1 root root 165 2007-02-19 00:49 ./source/ap/ghostscript-fonts-std/doinst.sh.gz +-rw-r--r-- 1 root root 3621829 2003-07-24 12:38 ./source/ap/ghostscript-fonts-std/ghostscript-fonts-std-8.11.tar.bz2 +-rwxr-xr-x 1 root root 2267 2009-05-19 20:05 ./source/ap/ghostscript-fonts-std/ghostscript-fonts-std.SlackBuild +-rw-r--r-- 1 root root 840 2007-02-19 00:47 ./source/ap/ghostscript-fonts-std/slack-desc +-rw-r--r-- 1 root root 1436 2008-04-11 20:41 ./source/ap/ghostscript/cidfmap.gz +-rw-r--r-- 1 root root 15698644 2010-02-10 23:24 ./source/ap/ghostscript/ghostscript-8.71.tar.xz +-rw-r--r-- 1 root root 360 2010-02-20 16:10 ./source/ap/ghostscript/ghostscript-pdf2dsc.patch.gz +-rwxr-xr-x 1 root root 5439 2010-04-25 21:08 ./source/ap/ghostscript/ghostscript.SlackBuild +-rw-r--r-- 1 root root 1011 2008-03-02 02:54 ./source/ap/ghostscript/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-16 20:42 ./source/ap/gphoto2 +-rw-r--r-- 1 root root 467484 2010-04-11 14:07 ./source/ap/gphoto2/gphoto2-2.4.9.tar.xz +-rwxr-xr-x 1 root root 3613 2010-02-14 22:59 ./source/ap/gphoto2/gphoto2.SlackBuild +-rw-r--r-- 1 root root 762 2008-09-11 03:57 ./source/ap/gphoto2/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/groff +-rw-r--r-- 1 root root 2842508 2009-01-09 14:34 ./source/ap/groff/groff-1.20.1.tar.bz2 +-rwxr-xr-x 1 root root 4105 2009-05-19 20:05 ./source/ap/groff/groff.SlackBuild +-rw-r--r-- 1 root root 270 2009-01-14 04:15 ./source/ap/groff/groff.docdir.diff.gz +-rw-r--r-- 1 root root 459 2005-06-23 01:46 ./source/ap/groff/groff.man.mdoc.local.gz +-rw-r--r-- 1 root root 887 2002-03-23 22:27 ./source/ap/groff/slack-desc +drwxr-xr-x 2 root root 4096 2009-08-22 02:33 ./source/ap/gutenprint +-rw-r--r-- 1 root root 4017848 2009-07-30 01:49 ./source/ap/gutenprint/gutenprint-5.2.4.tar.xz +-rwxr-xr-x 1 root root 4103 2010-02-17 21:01 ./source/ap/gutenprint/gutenprint.SlackBuild +-rw-r--r-- 1 root root 1010 2006-08-12 05:40 ./source/ap/gutenprint/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-29 18:50 ./source/ap/hplip +-rw-r--r-- 1 root root 118 2009-03-05 16:38 ./source/ap/hplip/doinst.sh.gz +-rw-r--r-- 1 root root 14626064 2010-02-26 03:16 ./source/ap/hplip/hplip-3.10.2.tar.xz +-rwxr-xr-x 1 root root 3866 2010-04-29 18:26 ./source/ap/hplip/hplip.SlackBuild +-rw-r--r-- 1 root root 935 2009-03-05 17:13 ./source/ap/hplip/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/ispell +-rw-r--r-- 1 root root 580742 2001-08-01 22:17 ./source/ap/ispell/ispell-3.2.06.tar.gz +-rwxr-xr-x 1 root root 3076 2009-05-19 20:05 ./source/ap/ispell/ispell.SlackBuild +-rw-r--r-- 1 root root 5808 2001-06-08 20:52 ./source/ap/ispell/ispell.diff.gz +-rw-r--r-- 1 root root 1057 2002-03-23 22:27 ./source/ap/ispell/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-18 23:11 ./source/ap/jed +-rw-r--r-- 1 root root 884198 2009-12-14 02:30 ./source/ap/jed/jed-0.99-19.tar.bz2 +-rw-r--r-- 1 root root 261 2009-12-14 02:33 ./source/ap/jed/jed-0.99-19.tar.bz2.asc +-rwxr-xr-x 1 root root 3136 2010-02-18 23:13 ./source/ap/jed/jed.SlackBuild +-rw-r--r-- 1 root root 938 2002-03-23 22:28 ./source/ap/jed/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/joe +-rw-r--r-- 1 root root 492145 2006-07-20 19:45 ./source/ap/joe/joe-3.5.tar.bz2 +-rwxr-xr-x 1 root root 2375 2009-05-23 00:41 ./source/ap/joe/joe.SlackBuild +-rw-r--r-- 1 root root 599 2002-02-24 21:25 ./source/ap/joe/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/jove +-rwxr-xr-x 1 root root 2850 2009-06-16 18:40 ./source/ap/jove/jove.SlackBuild +-rw-r--r-- 1 root root 1709 2009-03-04 05:45 ./source/ap/jove/jove.makefile.diff.gz +-rw-r--r-- 1 root root 451492 2009-03-04 05:45 ./source/ap/jove/jove4.16.0.70.tar.gz +-rw-r--r-- 1 root root 792 2009-03-04 05:45 ./source/ap/jove/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/ksh93 +-rw-r--r-- 1 root root 12885 2004-12-16 17:19 ./source/ap/ksh93/CPL +-rw-r--r-- 1 root root 344670 2007-04-15 20:14 ./source/ap/ksh93/INIT.2007-03-28.tgz +-rw-r--r-- 1 root root 611444 2007-04-15 20:15 ./source/ap/ksh93/ast-ksh-locale.2007-03-28.tgz +-rw-r--r-- 1 root root 1646999 2007-04-15 20:15 ./source/ap/ksh93/ast-ksh.2007-03-28.tgz +-rwxr-xr-x 1 root root 4943 2009-05-19 20:05 ./source/ap/ksh93/ksh93.SlackBuild +-rw-r--r-- 1 root root 996 2002-03-23 22:28 ./source/ap/ksh93/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/libx86 +-rw-r--r-- 1 root root 87428 2008-05-19 09:30 ./source/ap/libx86/libx86-1.1.tar.gz +-rwxr-xr-x 1 root root 2627 2009-05-19 20:05 ./source/ap/libx86/libx86.SlackBuild +-rw-r--r-- 1 root root 127 2008-11-24 18:21 ./source/ap/libx86/libx86.info +-rw-r--r-- 1 root root 324 2008-11-24 08:27 ./source/ap/libx86/lrmi.c.diff.gz +-rw-r--r-- 1 root root 769 2008-11-24 18:22 ./source/ap/libx86/slack-desc +drwxr-xr-x 4 root root 4096 2010-02-10 22:05 ./source/ap/linuxdoc-tools +-rw-r--r-- 1 root root 5157 2010-02-10 11:08 ./source/ap/linuxdoc-tools/ChangeLog.txt +drwxr-xr-x 2 root root 4096 2005-10-04 18:51 ./source/ap/linuxdoc-tools/arm +-rwxr-xr-x 1 root root 1591 2010-02-10 10:02 ./source/ap/linuxdoc-tools/arm/build +-rwxr-xr-x 1 root root 28 2006-02-05 00:16 ./source/ap/linuxdoc-tools/linuxdoc-tools.SlackBuild +-rwxr-xr-x 1 root root 30341 2010-02-10 11:32 ./source/ap/linuxdoc-tools/linuxdoc-tools.build +-rwxr-xr-x 1 root root 2786 2010-02-10 11:36 ./source/ap/linuxdoc-tools/postbuildfixes.sh +-rw-r--r-- 1 root root 1166 2006-06-26 15:17 ./source/ap/linuxdoc-tools/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-10 11:03 ./source/ap/linuxdoc-tools/sources +-rw-r--r-- 1 root root 775124 2009-12-07 05:48 ./source/ap/linuxdoc-tools/sources/asciidoc-8.5.2.tar.xz +-rw-r--r-- 1 root root 277650 2007-05-05 12:33 ./source/ap/linuxdoc-tools/sources/docbook-dsssl-1.79.tar.bz2 +-rw-r--r-- 1 root root 142278 2004-11-12 12:42 ./source/ap/linuxdoc-tools/sources/docbook-dsssl-doc-1.79.tar.bz2 +-rw-r--r-- 1 root root 2986142 2010-01-10 17:18 ./source/ap/linuxdoc-tools/sources/docbook-style-xsl-1.75.2-5.fc13.src.rpm +-rw-r--r-- 1 root root 165666 2010-01-10 17:04 ./source/ap/linuxdoc-tools/sources/docbook-utils-0.6.14-23.fc13.src.rpm +-rw-r--r-- 1 root root 98497 2006-10-26 17:17 ./source/ap/linuxdoc-tools/sources/docbook-xml-4.5.zip +-rw-r--r-- 1 root root 476372 2007-04-11 01:17 ./source/ap/linuxdoc-tools/sources/docbook_4.5.orig.tar.gz +-rw-r--r-- 1 root root 593420 2010-01-05 23:14 ./source/ap/linuxdoc-tools/sources/gnome-doc-utils-0.19.1.tar.xz +-rw-r--r-- 1 root root 644297 2009-12-18 13:14 ./source/ap/linuxdoc-tools/sources/gtk-doc-1.13.tar.bz2 +-rw-r--r-- 1 root root 707 2010-01-06 23:01 ./source/ap/linuxdoc-tools/sources/gtkdoc-1.13-fixref.patch.bz2 +-rw-r--r-- 1 root root 8329 2008-01-04 17:02 ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii-32.diff.gz +-rw-r--r-- 1 root root 92130 2001-04-15 16:15 ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii.orig.tar.gz +-rw-r--r-- 1 root root 630326 2010-02-10 11:01 ./source/ap/linuxdoc-tools/sources/linuxdoc-tools-0.9.66-5.fc13.src.rpm +-rw-r--r-- 1 root root 711620 2003-04-18 20:32 ./source/ap/linuxdoc-tools/sources/openjade-1.3.3-pre1.tar.xz +-rw-r--r-- 1 root root 1525065 2009-08-12 14:39 ./source/ap/linuxdoc-tools/sources/opensp-1.5.2-12.fc12.src.rpm +-rw-r--r-- 1 root root 95608 2010-01-10 17:01 ./source/ap/linuxdoc-tools/sources/sgml-common-0.6.3-31.fc13.src.rpm +-rwxr-xr-x 1 root root 4061 2010-02-10 10:06 ./source/ap/linuxdoc-tools/sources/source.download +-rw-r--r-- 1 root root 96240 2009-09-21 13:27 ./source/ap/linuxdoc-tools/sources/xmlto-0.0.23.tar.xz +-rwxr-xr-x 1 root root 2774 2010-02-10 11:32 ./source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools +drwxr-xr-x 2 root root 4096 2010-05-03 07:28 ./source/ap/lm_sensors +-rw-r--r-- 1 root root 157644 2010-02-02 20:19 ./source/ap/lm_sensors/lm_sensors-3.1.2.tar.bz2 +-rw-r--r-- 1 root root 65 2010-02-02 20:19 ./source/ap/lm_sensors/lm_sensors-3.1.2.tar.bz2.sig +-rwxr-xr-x 1 root root 3728 2010-05-03 07:29 ./source/ap/lm_sensors/lm_sensors.SlackBuild +-rw-r--r-- 1 root root 312 2008-10-26 01:06 ./source/ap/lm_sensors/lm_sensors.makefile.diff.gz +-rw-r--r-- 1 root root 1105 2006-09-20 03:52 ./source/ap/lm_sensors/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-13 01:02 ./source/ap/lsof +-rwxr-xr-x 1 root root 2744 2010-03-13 01:05 ./source/ap/lsof/lsof.SlackBuild +-rw-r--r-- 1 root root 753094 2010-01-18 19:11 ./source/ap/lsof/lsof_4.83.tar.bz2 +-rw-r--r-- 1 root root 152 2010-01-18 19:12 ./source/ap/lsof/lsof_4.83.tar.bz2.sig +-rw-r--r-- 1 root root 789 2002-03-17 00:42 ./source/ap/lsof/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/lsscsi +-rw-r--r-- 1 root root 107376 2009-01-23 16:50 ./source/ap/lsscsi/lsscsi-0.22.tar.bz2 +-rwxr-xr-x 1 root root 3183 2009-05-19 20:05 ./source/ap/lsscsi/lsscsi.SlackBuild +-rw-r--r-- 1 root root 36 2008-11-29 19:46 ./source/ap/lsscsi/lsscsi.url +-rw-r--r-- 1 root root 825 2007-05-02 19:26 ./source/ap/lsscsi/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/madplay +-rw-r--r-- 1 root root 590929 2004-02-23 23:28 ./source/ap/madplay/madplay-0.15.2b.tar.gz +-rw-r--r-- 1 root root 174 2004-02-23 23:28 ./source/ap/madplay/madplay-0.15.2b.tar.gz.sign +-rwxr-xr-x 1 root root 2458 2009-05-19 20:05 ./source/ap/madplay/madplay.SlackBuild +-rw-r--r-- 1 root root 797 2003-09-10 00:59 ./source/ap/madplay/slack-desc +drwxr-xr-x 2 root root 4096 2009-08-09 01:53 ./source/ap/man +drwxr-xr-x 2 root root 4096 2010-02-28 20:28 ./source/ap/man-pages +-rw-r--r-- 1 root root 147 2008-07-17 17:25 ./source/ap/man-pages/doinst.sh.gz +-rw-r--r-- 1 root root 1098770 2010-02-26 06:24 ./source/ap/man-pages/man-pages-3.24.tar.bz2 +-rw-r--r-- 1 root root 971300 2008-06-17 11:18 ./source/ap/man-pages/man-pages-posix-2003-a.tar.bz2 +-rwxr-xr-x 1 root root 3752 2010-02-28 20:29 ./source/ap/man-pages/man-pages.SlackBuild +-rw-r--r-- 1 root root 950 2008-07-17 17:29 ./source/ap/man-pages/slack-desc +-rw-r--r-- 1 root root 156268 2009-06-14 02:57 ./source/ap/man-pages/whatis.sample.xz +-rw-r--r-- 1 root root 274 2008-04-09 19:04 ./source/ap/man/doinst.sh.gz +-rw-r--r-- 1 root root 215 2009-08-09 01:53 ./source/ap/man/man-1.6f.nroff.mandoc.diff.gz +-rw-r--r-- 1 root root 223765 2007-12-31 22:38 ./source/ap/man/man-1.6f.tar.bz2 +-rwxr-xr-x 1 root root 3000 2009-08-09 02:17 ./source/ap/man/man.SlackBuild +-rw-r--r-- 1 root root 901 2002-03-23 22:29 ./source/ap/man/slack-desc +drwxr-xr-x 3 root root 4096 2010-05-09 23:18 ./source/ap/mc +-rw-r--r-- 1 root root 1534428 2010-05-09 23:15 ./source/ap/mc/mc-20100509_git.tar.xz +-rwxr-xr-x 1 root root 3631 2010-02-06 07:27 ./source/ap/mc/mc.SlackBuild +drwxr-xr-x 2 root root 4096 2009-07-14 20:23 ./source/ap/mc/profile.d +-rwxr-xr-x 1 root root 389 2008-11-29 19:55 ./source/ap/mc/profile.d/mc-wrapper.csh +-rwxr-xr-x 1 root root 315 2008-11-29 19:55 ./source/ap/mc/profile.d/mc-wrapper.sh +-rwxr-xr-x 1 root root 51 2008-11-29 19:55 ./source/ap/mc/profile.d/mc.csh +-rwxr-xr-x 1 root root 45 2008-11-29 19:55 ./source/ap/mc/profile.d/mc.sh +-rw-r--r-- 1 root root 904 2002-02-26 05:38 ./source/ap/mc/slack-desc +drwxr-xr-x 2 root root 4096 2009-06-22 02:44 ./source/ap/most +-rw-r--r-- 1 root root 131130 2007-09-09 16:16 ./source/ap/most/most-5.0.0a.tar.bz2 +-rwxr-xr-x 1 root root 2651 2009-06-25 23:08 ./source/ap/most/most.SlackBuild +-rw-r--r-- 1 root root 833 2003-06-06 00:54 ./source/ap/most/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-14 20:23 ./source/ap/mpg123 +-rw-r--r-- 1 root root 642436 2010-03-31 08:55 ./source/ap/mpg123/mpg123-1.12.1.tar.xz +-rwxr-xr-x 1 root root 5312 2010-03-22 03:20 ./source/ap/mpg123/mpg123.SlackBuild +-rw-r--r-- 1 root root 788 2009-12-15 17:57 ./source/ap/mpg123/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-23 16:38 ./source/ap/mysql +-rw-r--r-- 1 root root 330 2008-10-02 04:21 ./source/ap/mysql/doinst.sh.gz +-rw-r--r-- 1 root root 12809872 2010-04-06 14:41 ./source/ap/mysql/mysql-5.1.46.tar.xz +-rwxr-xr-x 1 root root 1816 2010-04-10 21:17 ./source/ap/mysql/mysql-embedded.build +-rwxr-xr-x 1 root root 6493 2010-05-05 19:31 ./source/ap/mysql/mysql.SlackBuild +-rw-r--r-- 1 root root 1208 2008-04-17 20:26 ./source/ap/mysql/rc.mysqld.gz +-rw-r--r-- 1 root root 816 2002-03-23 22:31 ./source/ap/mysql/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-20 10:53 ./source/ap/nano +-rw-r--r-- 1 root root 820844 2010-04-15 07:50 ./source/ap/nano/nano-2.2.4.tar.xz +-rwxr-xr-x 1 root root 3981 2010-02-16 05:51 ./source/ap/nano/nano.SlackBuild +-rw-r--r-- 1 root root 870 2007-04-07 20:52 ./source/ap/nano/slack-desc +drwxr-xr-x 2 root root 4096 2009-06-10 01:26 ./source/ap/normalize +-rw-r--r-- 1 root root 388777 2005-09-14 18:46 ./source/ap/normalize/normalize-0.7.7.tar.bz2 +-rwxr-xr-x 1 root root 2475 2009-06-10 01:26 ./source/ap/normalize/normalize.SlackBuild +-rw-r--r-- 1 root root 971 2004-05-25 04:30 ./source/ap/normalize/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/ntfsprogs +-rw-r--r-- 1 root root 678114 2007-09-29 07:37 ./source/ap/ntfsprogs/ntfsprogs-2.0.0.tar.bz2 +-rwxr-xr-x 1 root root 3560 2009-05-19 20:05 ./source/ap/ntfsprogs/ntfsprogs.SlackBuild +-rw-r--r-- 1 root root 1064 2008-02-29 05:35 ./source/ap/ntfsprogs/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-20 04:19 ./source/ap/pm-utils +-rw-r--r-- 1 root root 5733 2010-03-20 04:33 ./source/ap/pm-utils/README.SLACKWARE +-rw-r--r-- 1 root root 8932 2010-03-17 03:36 ./source/ap/pm-utils/pm-quirks-20100316.tar.xz +-rw-r--r-- 1 root root 145268 2010-03-17 03:22 ./source/ap/pm-utils/pm-utils-1.3.0.tar.xz +-rwxr-xr-x 1 root root 4076 2010-03-20 04:33 ./source/ap/pm-utils/pm-utils.SlackBuild +-rw-r--r-- 1 root root 32 2009-04-14 04:05 ./source/ap/pm-utils/pm-utils.url +-rw-r--r-- 1 root root 835 2009-04-14 04:05 ./source/ap/pm-utils/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 04:32 ./source/ap/powertop +-rw-r--r-- 1 root root 73136 2009-01-05 18:53 ./source/ap/powertop/powertop-1.11.tar.gz +-rwxr-xr-x 1 root root 3152 2010-05-04 04:42 ./source/ap/powertop/powertop.SlackBuild +-rw-r--r-- 1 root root 1007 2010-05-04 04:42 ./source/ap/powertop/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-25 23:07 ./source/ap/radeontool +-rw-r--r-- 1 root root 338446 2010-03-24 03:21 ./source/ap/radeontool/radeontool-1.6.1.tar.bz2 +-rwxr-xr-x 1 root root 2886 2010-04-27 21:20 ./source/ap/radeontool/radeontool.SlackBuild +-rw-r--r-- 1 root root 802 2008-11-24 19:37 ./source/ap/radeontool/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/ap/rexima +-rw-r--r-- 1 root root 15903 2003-07-01 08:56 ./source/ap/rexima/rexima-1.4.tar.gz +-rwxr-xr-x 1 root root 2106 2009-05-23 00:41 ./source/ap/rexima/rexima.SlackBuild +-rw-r--r-- 1 root root 829 2002-05-29 20:44 ./source/ap/rexima/slack-desc +drwxr-xr-x 2 root root 4096 2009-11-27 20:09 ./source/ap/rpm +-rw-r--r-- 1 root root 133 2009-11-27 18:09 ./source/ap/rpm/Packages.gz +-rw-r--r-- 1 root root 132 2009-11-27 18:09 ./source/ap/rpm/doinst.sh.gz +-rw-r--r-- 1 root root 3033272 2010-01-13 17:29 ./source/ap/rpm/rpm-4.8.0.tar.xz +-rwxr-xr-x 1 root root 4020 2010-01-13 20:36 ./source/ap/rpm/rpm.SlackBuild +-rw-r--r-- 1 root root 948 2009-11-27 18:09 ./source/ap/rpm/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/rzip +-rw-r--r-- 1 root root 46785 2006-02-14 00:41 ./source/ap/rzip/rzip-2.1.tar.gz +-rwxr-xr-x 1 root root 2451 2009-05-19 20:05 ./source/ap/rzip/rzip.SlackBuild +-rw-r--r-- 1 root root 723 2004-06-03 03:13 ./source/ap/rzip/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/ap/sc +-rw-r--r-- 1 root root 309 1999-08-03 23:52 ./source/ap/sc/_sc.tar.gz +-rw-r--r-- 1 root root 636 2002-09-20 05:00 ./source/ap/sc/sc-7.16.lsm +-rw-r--r-- 1 root root 210809 2002-09-20 05:00 ./source/ap/sc/sc-7.16.tar.gz +-rw-r--r-- 1 root root 187 2008-10-23 19:40 ./source/ap/sc/sc-gcc34.diff.gz +-rw-r--r-- 1 root root 208 2008-10-23 19:41 ./source/ap/sc/sc-malloc.diff.gz +-rwxr-xr-x 1 root root 2764 2009-05-23 00:42 ./source/ap/sc/sc.SlackBuild +-rw-r--r-- 1 root root 576 2002-02-24 21:19 ./source/ap/sc/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/ap/screen +-rw-r--r-- 1 root root 741741 2006-10-23 13:10 ./source/ap/screen/screen-4.0.3.tar.bz2 +-rwxr-xr-x 1 root root 3756 2009-05-23 00:42 ./source/ap/screen/screen.SlackBuild +-rw-r--r-- 1 root root 1111 2002-03-23 22:34 ./source/ap/screen/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/seejpeg +-rw-r--r-- 1 root root 227 2000-04-30 06:01 ./source/ap/seejpeg/_seejpeg.tar.gz +-rw-r--r-- 1 root root 500701 1996-07-25 23:00 ./source/ap/seejpeg/libjpeg-6a.tar.gz +-rw-r--r-- 1 root root 654 2000-04-30 05:52 ./source/ap/seejpeg/seejpeg-1.10.diff.gz +-rw-r--r-- 1 root root 855 1999-11-09 00:03 ./source/ap/seejpeg/seejpeg-1.10.lsm +-rw-r--r-- 1 root root 46550 1999-11-09 00:03 ./source/ap/seejpeg/seejpeg-1.10.tgz +-rwxr-xr-x 1 root root 2281 2009-05-19 20:05 ./source/ap/seejpeg/seejpeg.SlackBuild +-rw-r--r-- 1 root root 913 2002-03-23 22:34 ./source/ap/seejpeg/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 19:16 ./source/ap/slackpkg +-rw-r--r-- 1 root root 69 2008-11-21 19:07 ./source/ap/slackpkg/README +drwxr-xr-x 2 root root 4096 2009-08-24 07:00 ./source/ap/sox +-rw-r--r-- 1 root root 710 2002-03-23 22:35 ./source/ap/sox/slack-desc +-rw-r--r-- 1 root root 688296 2009-06-21 20:05 ./source/ap/sox/sox-14.3.0.tar.xz +-rwxr-xr-x 1 root root 3446 2010-02-17 23:14 ./source/ap/sox/sox.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-02 15:50 ./source/ap/sqlite +-rw-r--r-- 1 root root 1684 2008-08-01 05:31 ./source/ap/sqlite/COPYRIGHT.gz +-rw-r--r-- 1 root root 942 2008-08-01 01:21 ./source/ap/sqlite/slack-desc +-rw-r--r-- 1 root root 2069148 2010-03-31 11:58 ./source/ap/sqlite/sqlite-3.6.23.1.tar.xz +-rwxr-xr-x 1 root root 3772 2010-02-11 21:52 ./source/ap/sqlite/sqlite.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-20 12:17 ./source/ap/sudo +-rw-r--r-- 1 root root 275 2004-09-19 00:25 ./source/ap/sudo/doinst.sh.gz +-rw-r--r-- 1 root root 869 2002-03-23 22:36 ./source/ap/sudo/slack-desc +-rw-r--r-- 1 root root 771148 2010-04-09 21:14 ./source/ap/sudo/sudo-1.7.2p6.tar.gz +-rw-r--r-- 1 root root 72 2010-04-09 21:22 ./source/ap/sudo/sudo-1.7.2p6.tar.gz.sig +-rwxr-xr-x 1 root root 3737 2010-04-20 16:26 ./source/ap/sudo/sudo.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-25 23:24 ./source/ap/sysstat +-rw-r--r-- 1 root root 527 2009-08-30 05:02 ./source/ap/sysstat/doinst.sh.gz +-rw-r--r-- 1 root root 902 2009-08-30 04:53 ./source/ap/sysstat/slack-desc +-rw-r--r-- 1 root root 243939 2010-02-28 08:50 ./source/ap/sysstat/sysstat-9.0.6.1.tar.bz2 +-rwxr-xr-x 1 root root 5157 2010-04-25 23:27 ./source/ap/sysstat/sysstat.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/ap/texinfo +-rw-r--r-- 1 root root 5853 2008-11-20 23:57 ./source/ap/texinfo/dir.gz +-rw-r--r-- 1 root root 251 2008-11-21 00:01 ./source/ap/texinfo/doinst.sh.gz +-rw-r--r-- 1 root root 1074 2002-03-22 20:41 ./source/ap/texinfo/slack-desc +-rw-r--r-- 1 root root 1969110 2008-09-29 15:17 ./source/ap/texinfo/texinfo-4.13a.tar.bz2 +-rwxr-xr-x 1 root root 2867 2009-05-23 00:42 ./source/ap/texinfo/texinfo.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/vbetool +-rw-r--r-- 1 root root 833 2008-11-24 18:23 ./source/ap/vbetool/slack-desc +-rw-r--r-- 1 root root 182826 2008-05-16 12:56 ./source/ap/vbetool/vbetool-1.1.tar.gz +-rwxr-xr-x 1 root root 2546 2009-05-19 20:05 ./source/ap/vbetool/vbetool.SlackBuild +-rw-r--r-- 1 root root 129 2008-11-24 18:23 ./source/ap/vbetool/vbetool.info +drwxr-xr-x 3 root root 4096 2010-05-10 23:01 ./source/ap/vim +-rw-r--r-- 1 root root 287496 2007-09-05 04:42 ./source/ap/vim/ctags-5.7.tar.gz +-rw-r--r-- 1 root root 118 2006-08-23 23:20 ./source/ap/vim/doinst.sh.gz +-rw-r--r-- 1 root root 4203 2007-02-16 22:42 ./source/ap/vim/gvim.desktop +-rw-r--r-- 1 root root 8249 2006-01-19 17:01 ./source/ap/vim/gvim.png +drwxr-xr-x 2 root root 16384 2010-05-10 23:00 ./source/ap/vim/patches +-rw-r--r-- 1 root root 972 2008-08-17 21:03 ./source/ap/vim/patches/7.2.001.gz +-rw-r--r-- 1 root root 829 2008-08-17 21:45 ./source/ap/vim/patches/7.2.002.gz +-rw-r--r-- 1 root root 1380 2008-08-25 02:14 ./source/ap/vim/patches/7.2.003.gz +-rw-r--r-- 1 root root 1324 2008-08-25 02:36 ./source/ap/vim/patches/7.2.004.gz +-rw-r--r-- 1 root root 1621 2008-08-25 02:51 ./source/ap/vim/patches/7.2.005.gz +-rw-r--r-- 1 root root 871 2008-08-25 03:04 ./source/ap/vim/patches/7.2.006.gz +-rw-r--r-- 1 root root 4921 2008-09-01 14:53 ./source/ap/vim/patches/7.2.007.gz +-rw-r--r-- 1 root root 934 2008-09-01 15:33 ./source/ap/vim/patches/7.2.008.gz +-rw-r--r-- 1 root root 1032 2008-09-01 15:56 ./source/ap/vim/patches/7.2.009.gz +-rw-r--r-- 1 root root 2228 2008-09-06 14:45 ./source/ap/vim/patches/7.2.010.gz +-rw-r--r-- 1 root root 1257 2008-09-07 11:55 ./source/ap/vim/patches/7.2.011.gz +-rw-r--r-- 1 root root 739 2008-09-07 13:50 ./source/ap/vim/patches/7.2.012.gz +-rw-r--r-- 1 root root 1726 2008-09-07 19:49 ./source/ap/vim/patches/7.2.013.gz +-rw-r--r-- 1 root root 846 2008-09-10 13:39 ./source/ap/vim/patches/7.2.014.gz +-rw-r--r-- 1 root root 936 2008-09-10 16:27 ./source/ap/vim/patches/7.2.015.gz +-rw-r--r-- 1 root root 2018 2008-09-14 12:43 ./source/ap/vim/patches/7.2.016.gz +-rw-r--r-- 1 root root 1895 2008-09-14 13:59 ./source/ap/vim/patches/7.2.017.gz +-rw-r--r-- 1 root root 774 2008-09-14 19:42 ./source/ap/vim/patches/7.2.018.gz +-rw-r--r-- 1 root root 1131 2008-09-18 10:45 ./source/ap/vim/patches/7.2.019.gz +-rw-r--r-- 1 root root 822 2008-09-18 18:56 ./source/ap/vim/patches/7.2.020.gz +-rw-r--r-- 1 root root 1689 2008-09-18 19:30 ./source/ap/vim/patches/7.2.021.gz +-rw-r--r-- 1 root root 1596 2008-09-20 14:27 ./source/ap/vim/patches/7.2.022.gz +-rw-r--r-- 1 root root 992 2008-10-01 19:10 ./source/ap/vim/patches/7.2.023.gz +-rw-r--r-- 1 root root 800 2008-10-02 20:49 ./source/ap/vim/patches/7.2.024.gz +-rw-r--r-- 1 root root 796 2008-10-02 20:56 ./source/ap/vim/patches/7.2.025.gz +-rw-r--r-- 1 root root 1362 2008-11-01 12:53 ./source/ap/vim/patches/7.2.026.gz +-rw-r--r-- 1 root root 1144 2008-11-06 09:24 ./source/ap/vim/patches/7.2.027.gz +-rw-r--r-- 1 root root 788 2008-11-06 10:06 ./source/ap/vim/patches/7.2.028.gz +-rw-r--r-- 1 root root 690 2008-11-06 16:16 ./source/ap/vim/patches/7.2.029.gz +-rw-r--r-- 1 root root 834 2008-11-06 19:47 ./source/ap/vim/patches/7.2.030.gz +-rw-r--r-- 1 root root 10923 2008-11-09 12:45 ./source/ap/vim/patches/7.2.031.gz +-rw-r--r-- 1 root root 795 2008-11-09 16:21 ./source/ap/vim/patches/7.2.032.gz +-rw-r--r-- 1 root root 1000 2008-11-11 20:57 ./source/ap/vim/patches/7.2.033.gz +-rw-r--r-- 1 root root 1057 2008-11-12 11:52 ./source/ap/vim/patches/7.2.034.gz +-rw-r--r-- 1 root root 1286 2008-11-12 12:09 ./source/ap/vim/patches/7.2.035.gz +-rw-r--r-- 1 root root 2305 2008-11-12 12:36 ./source/ap/vim/patches/7.2.036.gz +-rw-r--r-- 1 root root 822 2008-11-12 13:10 ./source/ap/vim/patches/7.2.037.gz +-rw-r--r-- 1 root root 985 2008-11-12 13:52 ./source/ap/vim/patches/7.2.038.gz +-rw-r--r-- 1 root root 776 2008-11-12 14:29 ./source/ap/vim/patches/7.2.039.gz +-rw-r--r-- 1 root root 986 2008-11-12 15:06 ./source/ap/vim/patches/7.2.040.gz +-rw-r--r-- 1 root root 5431 2008-11-15 13:11 ./source/ap/vim/patches/7.2.041.gz +-rw-r--r-- 1 root root 1757 2008-11-15 15:07 ./source/ap/vim/patches/7.2.042.gz +-rw-r--r-- 1 root root 1074 2008-11-20 09:28 ./source/ap/vim/patches/7.2.043.gz +-rw-r--r-- 1 root root 1818 2008-11-20 09:37 ./source/ap/vim/patches/7.2.044.gz +-rw-r--r-- 1 root root 1035 2008-11-20 10:04 ./source/ap/vim/patches/7.2.045.gz +-rw-r--r-- 1 root root 892 2008-11-20 10:56 ./source/ap/vim/patches/7.2.046.gz +-rw-r--r-- 1 root root 1196 2008-11-20 15:12 ./source/ap/vim/patches/7.2.047.gz +-rw-r--r-- 1 root root 1681 2008-11-20 15:12 ./source/ap/vim/patches/7.2.048.gz +-rw-r--r-- 1 root root 6742 2008-11-20 16:10 ./source/ap/vim/patches/7.2.049.gz +-rw-r--r-- 1 root root 2154 2008-11-28 09:09 ./source/ap/vim/patches/7.2.050.gz +-rw-r--r-- 1 root root 3820 2008-11-28 10:01 ./source/ap/vim/patches/7.2.051.gz +-rw-r--r-- 1 root root 1066 2008-11-28 10:16 ./source/ap/vim/patches/7.2.052.gz +-rw-r--r-- 1 root root 849 2008-11-28 10:48 ./source/ap/vim/patches/7.2.053.gz +-rw-r--r-- 1 root root 879 2008-11-28 11:06 ./source/ap/vim/patches/7.2.054.gz +-rw-r--r-- 1 root root 8518 2008-11-28 20:27 ./source/ap/vim/patches/7.2.055.gz +-rw-r--r-- 1 root root 846 2008-11-29 19:11 ./source/ap/vim/patches/7.2.056.gz +-rw-r--r-- 1 root root 1293 2008-11-29 19:19 ./source/ap/vim/patches/7.2.057.gz +-rw-r--r-- 1 root root 1183 2008-11-30 11:15 ./source/ap/vim/patches/7.2.058.gz +-rw-r--r-- 1 root root 904 2008-11-30 14:16 ./source/ap/vim/patches/7.2.059.gz +-rw-r--r-- 1 root root 8301 2008-11-30 20:13 ./source/ap/vim/patches/7.2.060.gz +-rw-r--r-- 1 root root 966 2008-12-03 08:53 ./source/ap/vim/patches/7.2.061.gz +-rw-r--r-- 1 root root 842 2008-12-03 10:22 ./source/ap/vim/patches/7.2.062.gz +-rw-r--r-- 1 root root 1095 2008-12-03 11:45 ./source/ap/vim/patches/7.2.063.gz +-rw-r--r-- 1 root root 922 2008-12-03 12:21 ./source/ap/vim/patches/7.2.064.gz +-rw-r--r-- 1 root root 1578 2008-12-03 17:50 ./source/ap/vim/patches/7.2.065.gz +-rw-r--r-- 1 root root 1155 2008-12-09 09:57 ./source/ap/vim/patches/7.2.066.gz +-rw-r--r-- 1 root root 774 2008-12-09 10:20 ./source/ap/vim/patches/7.2.067.gz +-rw-r--r-- 1 root root 1138 2008-12-09 11:29 ./source/ap/vim/patches/7.2.068.gz +-rw-r--r-- 1 root root 827 2008-12-09 21:35 ./source/ap/vim/patches/7.2.069.gz +-rw-r--r-- 1 root root 4840 2008-12-21 12:04 ./source/ap/vim/patches/7.2.070.gz +-rw-r--r-- 1 root root 1147 2008-12-24 11:44 ./source/ap/vim/patches/7.2.071.gz +-rw-r--r-- 1 root root 790 2008-12-31 13:03 ./source/ap/vim/patches/7.2.072.gz +-rw-r--r-- 1 root root 1423 2008-12-24 11:54 ./source/ap/vim/patches/7.2.073.gz +-rw-r--r-- 1 root root 922 2008-12-24 11:57 ./source/ap/vim/patches/7.2.074.gz +-rw-r--r-- 1 root root 1032 2008-12-24 12:11 ./source/ap/vim/patches/7.2.075.gz +-rw-r--r-- 1 root root 1330 2008-12-30 15:17 ./source/ap/vim/patches/7.2.076.gz +-rw-r--r-- 1 root root 1797 2008-12-31 15:22 ./source/ap/vim/patches/7.2.077.gz +-rw-r--r-- 1 root root 1310 2009-01-06 14:03 ./source/ap/vim/patches/7.2.078.gz +-rw-r--r-- 1 root root 2377 2009-01-06 15:15 ./source/ap/vim/patches/7.2.079.gz +-rw-r--r-- 1 root root 2883 2009-01-13 11:30 ./source/ap/vim/patches/7.2.080.gz +-rw-r--r-- 1 root root 908 2009-01-13 15:39 ./source/ap/vim/patches/7.2.081.gz +-rw-r--r-- 1 root root 1085 2009-01-13 15:58 ./source/ap/vim/patches/7.2.082.gz +-rw-r--r-- 1 root root 852 2009-01-13 16:28 ./source/ap/vim/patches/7.2.083.gz +-rw-r--r-- 1 root root 1594 2009-01-13 17:12 ./source/ap/vim/patches/7.2.084.gz +-rw-r--r-- 1 root root 934 2009-01-22 17:33 ./source/ap/vim/patches/7.2.085.gz +-rw-r--r-- 1 root root 1244 2009-01-22 19:49 ./source/ap/vim/patches/7.2.086.gz +-rw-r--r-- 1 root root 804 2009-01-22 20:32 ./source/ap/vim/patches/7.2.087.gz +-rw-r--r-- 1 root root 1254 2009-01-22 20:50 ./source/ap/vim/patches/7.2.088.gz +-rw-r--r-- 1 root root 1158 2009-01-28 13:18 ./source/ap/vim/patches/7.2.089.gz +-rw-r--r-- 1 root root 1521 2009-01-28 14:43 ./source/ap/vim/patches/7.2.090.gz +-rw-r--r-- 1 root root 1036 2009-01-28 15:05 ./source/ap/vim/patches/7.2.091.gz +-rw-r--r-- 1 root root 1839 2009-01-28 18:09 ./source/ap/vim/patches/7.2.092.gz +-rw-r--r-- 1 root root 2221 2009-01-28 20:23 ./source/ap/vim/patches/7.2.093.gz +-rw-r--r-- 1 root root 1373 2009-02-04 10:21 ./source/ap/vim/patches/7.2.094.gz +-rw-r--r-- 1 root root 907 2009-02-04 10:46 ./source/ap/vim/patches/7.2.095.gz +-rw-r--r-- 1 root root 759 2009-02-04 12:15 ./source/ap/vim/patches/7.2.096.gz +-rw-r--r-- 1 root root 933 2009-02-04 13:19 ./source/ap/vim/patches/7.2.097.gz +-rw-r--r-- 1 root root 843 2009-02-04 15:27 ./source/ap/vim/patches/7.2.098.gz +-rw-r--r-- 1 root root 1459 2009-02-04 16:29 ./source/ap/vim/patches/7.2.099.gz +-rw-r--r-- 1 root root 1654 2009-02-04 16:51 ./source/ap/vim/patches/7.2.100.gz +-rw-r--r-- 1 root root 755 2009-02-04 17:35 ./source/ap/vim/patches/7.2.101.gz +-rw-r--r-- 1 root root 813 2009-02-05 19:48 ./source/ap/vim/patches/7.2.102.gz +-rw-r--r-- 1 root root 1643 2009-02-11 10:35 ./source/ap/vim/patches/7.2.103.gz +-rw-r--r-- 1 root root 881 2009-02-11 15:04 ./source/ap/vim/patches/7.2.104.gz +-rw-r--r-- 1 root root 1034 2009-02-11 15:47 ./source/ap/vim/patches/7.2.105.gz +-rw-r--r-- 1 root root 1380 2009-02-11 16:59 ./source/ap/vim/patches/7.2.106.gz +-rw-r--r-- 1 root root 917 2009-02-11 17:48 ./source/ap/vim/patches/7.2.107.gz +-rw-r--r-- 1 root root 891 2009-02-11 21:48 ./source/ap/vim/patches/7.2.108.gz +-rw-r--r-- 1 root root 4064 2009-02-21 19:29 ./source/ap/vim/patches/7.2.109.gz +-rw-r--r-- 1 root root 731 2009-02-21 19:38 ./source/ap/vim/patches/7.2.110.gz +-rw-r--r-- 1 root root 1151 2009-02-21 20:12 ./source/ap/vim/patches/7.2.111.gz +-rw-r--r-- 1 root root 827 2009-02-21 20:26 ./source/ap/vim/patches/7.2.112.gz +-rw-r--r-- 1 root root 1079 2009-02-21 21:04 ./source/ap/vim/patches/7.2.113.gz +-rw-r--r-- 1 root root 1001 2009-02-21 21:14 ./source/ap/vim/patches/7.2.114.gz +-rw-r--r-- 1 root root 1192 2009-02-21 21:30 ./source/ap/vim/patches/7.2.115.gz +-rw-r--r-- 1 root root 898 2009-02-21 21:58 ./source/ap/vim/patches/7.2.116.gz +-rw-r--r-- 1 root root 1090 2009-02-21 23:03 ./source/ap/vim/patches/7.2.117.gz +-rw-r--r-- 1 root root 979 2009-02-21 23:59 ./source/ap/vim/patches/7.2.118.gz +-rw-r--r-- 1 root root 759 2009-02-22 00:15 ./source/ap/vim/patches/7.2.119.gz +-rw-r--r-- 1 root root 2555 2009-02-22 01:38 ./source/ap/vim/patches/7.2.120.gz +-rw-r--r-- 1 root root 1839 2009-02-22 05:54 ./source/ap/vim/patches/7.2.121.gz +-rw-r--r-- 1 root root 1243 2009-02-22 20:14 ./source/ap/vim/patches/7.2.122.gz +-rw-r--r-- 1 root root 874 2009-02-22 22:44 ./source/ap/vim/patches/7.2.123.gz +-rw-r--r-- 1 root root 1315 2009-02-22 23:55 ./source/ap/vim/patches/7.2.124.gz +-rw-r--r-- 1 root root 1454 2009-02-24 03:12 ./source/ap/vim/patches/7.2.125.gz +-rw-r--r-- 1 root root 1784 2009-02-24 03:30 ./source/ap/vim/patches/7.2.126.gz +-rw-r--r-- 1 root root 881 2009-02-24 03:38 ./source/ap/vim/patches/7.2.127.gz +-rw-r--r-- 1 root root 815 2009-03-01 01:46 ./source/ap/vim/patches/7.2.128.gz +-rw-r--r-- 1 root root 1012 2009-03-02 01:13 ./source/ap/vim/patches/7.2.129.gz +-rw-r--r-- 1 root root 4075 2009-03-02 01:46 ./source/ap/vim/patches/7.2.130.gz +-rw-r--r-- 1 root root 1138 2009-03-04 03:17 ./source/ap/vim/patches/7.2.131.gz +-rw-r--r-- 1 root root 2826 2009-03-05 02:16 ./source/ap/vim/patches/7.2.132.gz +-rw-r--r-- 1 root root 856 2009-03-11 11:47 ./source/ap/vim/patches/7.2.133.gz +-rw-r--r-- 1 root root 960 2009-03-11 12:11 ./source/ap/vim/patches/7.2.134.gz +-rw-r--r-- 1 root root 940 2009-03-11 14:10 ./source/ap/vim/patches/7.2.135.gz +-rw-r--r-- 1 root root 740 2009-03-11 14:37 ./source/ap/vim/patches/7.2.136.gz +-rw-r--r-- 1 root root 3549 2009-03-11 15:29 ./source/ap/vim/patches/7.2.137.gz +-rw-r--r-- 1 root root 1347 2009-03-11 15:37 ./source/ap/vim/patches/7.2.138.gz +-rw-r--r-- 1 root root 995 2009-03-11 16:29 ./source/ap/vim/patches/7.2.139.gz +-rw-r--r-- 1 root root 984 2009-03-11 16:46 ./source/ap/vim/patches/7.2.140.gz +-rw-r--r-- 1 root root 2187 2009-03-11 16:58 ./source/ap/vim/patches/7.2.141.gz +-rw-r--r-- 1 root root 886 2009-03-18 11:22 ./source/ap/vim/patches/7.2.142.gz +-rw-r--r-- 1 root root 2618 2009-03-18 11:52 ./source/ap/vim/patches/7.2.143.gz +-rw-r--r-- 1 root root 1053 2009-03-18 13:22 ./source/ap/vim/patches/7.2.144.gz +-rw-r--r-- 1 root root 1396 2009-03-18 13:34 ./source/ap/vim/patches/7.2.145.gz +-rw-r--r-- 1 root root 1461 2009-03-18 14:41 ./source/ap/vim/patches/7.2.146.gz +-rw-r--r-- 1 root root 791 2009-03-18 15:29 ./source/ap/vim/patches/7.2.147.gz +-rw-r--r-- 1 root root 1566 2009-03-20 11:33 ./source/ap/vim/patches/7.2.148.gz +-rw-r--r-- 1 root root 4591 2009-04-22 10:56 ./source/ap/vim/patches/7.2.149.gz +-rw-r--r-- 1 root root 6762 2009-04-22 11:08 ./source/ap/vim/patches/7.2.150.gz +-rw-r--r-- 1 root root 782 2009-04-22 11:52 ./source/ap/vim/patches/7.2.151.gz +-rw-r--r-- 1 root root 1353 2009-04-22 12:44 ./source/ap/vim/patches/7.2.152.gz +-rw-r--r-- 1 root root 1187 2009-04-22 13:39 ./source/ap/vim/patches/7.2.153.gz +-rw-r--r-- 1 root root 1144 2009-04-22 13:58 ./source/ap/vim/patches/7.2.154.gz +-rw-r--r-- 1 root root 710 2009-04-22 14:10 ./source/ap/vim/patches/7.2.155.gz +-rw-r--r-- 1 root root 1842 2009-04-22 14:24 ./source/ap/vim/patches/7.2.156.gz +-rw-r--r-- 1 root root 1572 2009-04-22 15:45 ./source/ap/vim/patches/7.2.157.gz +-rw-r--r-- 1 root root 958 2009-04-22 15:45 ./source/ap/vim/patches/7.2.158.gz +-rw-r--r-- 1 root root 918 2009-04-22 15:53 ./source/ap/vim/patches/7.2.159.gz +-rw-r--r-- 1 root root 705 2009-04-22 16:45 ./source/ap/vim/patches/7.2.160.gz +-rw-r--r-- 1 root root 1802 2009-04-29 09:03 ./source/ap/vim/patches/7.2.161.gz +-rw-r--r-- 1 root root 1029 2009-04-29 09:53 ./source/ap/vim/patches/7.2.162.gz +-rw-r--r-- 1 root root 962 2009-04-29 15:42 ./source/ap/vim/patches/7.2.163.gz +-rw-r--r-- 1 root root 1471 2009-04-29 15:42 ./source/ap/vim/patches/7.2.164.gz +-rw-r--r-- 1 root root 828 2009-04-29 16:04 ./source/ap/vim/patches/7.2.165.gz +-rw-r--r-- 1 root root 3389 2009-04-29 16:47 ./source/ap/vim/patches/7.2.166.gz +-rw-r--r-- 1 root root 13059 2009-05-13 12:09 ./source/ap/vim/patches/7.2.167.gz +-rw-r--r-- 1 root root 1051 2009-05-13 12:50 ./source/ap/vim/patches/7.2.168.gz +-rw-r--r-- 1 root root 8954 2009-05-13 16:56 ./source/ap/vim/patches/7.2.169.gz +-rw-r--r-- 1 root root 1387 2009-05-13 18:48 ./source/ap/vim/patches/7.2.170.gz +-rw-r--r-- 1 root root 1004 2009-05-14 19:52 ./source/ap/vim/patches/7.2.171.gz +-rw-r--r-- 1 root root 983 2009-05-14 20:01 ./source/ap/vim/patches/7.2.172.gz +-rw-r--r-- 1 root root 4735 2009-05-14 20:20 ./source/ap/vim/patches/7.2.173.gz +-rw-r--r-- 1 root root 9716 2009-05-15 19:32 ./source/ap/vim/patches/7.2.174.gz +-rw-r--r-- 1 root root 735 2009-05-16 14:16 ./source/ap/vim/patches/7.2.175.gz +-rw-r--r-- 1 root root 2061 2009-05-16 14:37 ./source/ap/vim/patches/7.2.176.gz +-rw-r--r-- 1 root root 10066 2009-05-16 15:31 ./source/ap/vim/patches/7.2.177.gz +-rw-r--r-- 1 root root 1390 2009-05-16 19:07 ./source/ap/vim/patches/7.2.178.gz +-rw-r--r-- 1 root root 1233 2009-05-17 09:59 ./source/ap/vim/patches/7.2.179.gz +-rw-r--r-- 1 root root 25733 2009-05-17 11:31 ./source/ap/vim/patches/7.2.180.gz +-rw-r--r-- 1 root root 11581 2009-05-17 14:24 ./source/ap/vim/patches/7.2.181.gz +-rw-r--r-- 1 root root 988 2009-05-17 21:26 ./source/ap/vim/patches/7.2.182.gz +-rw-r--r-- 1 root root 9233 2009-05-21 13:21 ./source/ap/vim/patches/7.2.183.gz +-rw-r--r-- 1 root root 16204 2009-05-21 21:26 ./source/ap/vim/patches/7.2.184.gz +-rw-r--r-- 1 root root 2598 2009-05-22 16:21 ./source/ap/vim/patches/7.2.185.gz +-rw-r--r-- 1 root root 1610 2009-05-22 19:08 ./source/ap/vim/patches/7.2.186.gz +-rw-r--r-- 1 root root 1211 2009-05-23 12:28 ./source/ap/vim/patches/7.2.187.gz +-rw-r--r-- 1 root root 2785 2009-05-24 11:41 ./source/ap/vim/patches/7.2.188.gz +-rw-r--r-- 1 root root 1195 2009-05-26 09:03 ./source/ap/vim/patches/7.2.189.gz +-rw-r--r-- 1 root root 1894 2009-05-26 16:13 ./source/ap/vim/patches/7.2.190.gz +-rw-r--r-- 1 root root 22827 2009-05-26 20:59 ./source/ap/vim/patches/7.2.191.gz +-rw-r--r-- 1 root root 1455 2009-06-03 11:22 ./source/ap/vim/patches/7.2.192.gz +-rw-r--r-- 1 root root 759 2009-06-03 12:26 ./source/ap/vim/patches/7.2.193.gz +-rw-r--r-- 1 root root 741 2009-06-03 13:05 ./source/ap/vim/patches/7.2.194.gz +-rw-r--r-- 1 root root 1054 2009-06-03 20:06 ./source/ap/vim/patches/7.2.195.gz +-rw-r--r-- 1 root root 1474 2009-06-03 20:08 ./source/ap/vim/patches/7.2.196.gz +-rw-r--r-- 1 root root 778 2009-06-10 16:16 ./source/ap/vim/patches/7.2.197.gz +-rw-r--r-- 1 root root 967 2009-06-16 09:08 ./source/ap/vim/patches/7.2.198.gz +-rw-r--r-- 1 root root 860 2009-06-16 12:32 ./source/ap/vim/patches/7.2.199.gz +-rw-r--r-- 1 root root 3075 2009-06-16 13:12 ./source/ap/vim/patches/7.2.200.gz +-rw-r--r-- 1 root root 4092 2009-06-16 13:23 ./source/ap/vim/patches/7.2.201.gz +-rw-r--r-- 1 root root 996 2009-06-16 13:36 ./source/ap/vim/patches/7.2.202.gz +-rw-r--r-- 1 root root 9493 2009-06-16 14:02 ./source/ap/vim/patches/7.2.203.gz +-rw-r--r-- 1 root root 1525 2009-06-16 14:35 ./source/ap/vim/patches/7.2.204.gz +-rw-r--r-- 1 root root 1150 2009-06-16 14:45 ./source/ap/vim/patches/7.2.205.gz +-rw-r--r-- 1 root root 809 2009-06-16 15:23 ./source/ap/vim/patches/7.2.206.gz +-rw-r--r-- 1 root root 1183 2009-06-16 15:23 ./source/ap/vim/patches/7.2.207.gz +-rw-r--r-- 1 root root 1250 2009-06-16 15:51 ./source/ap/vim/patches/7.2.208.gz +-rw-r--r-- 1 root root 1125 2009-06-16 16:16 ./source/ap/vim/patches/7.2.209.gz +-rw-r--r-- 1 root root 914 2009-06-24 09:59 ./source/ap/vim/patches/7.2.210.gz +-rw-r--r-- 1 root root 799 2009-06-24 14:26 ./source/ap/vim/patches/7.2.211.gz +-rw-r--r-- 1 root root 846 2009-06-24 14:41 ./source/ap/vim/patches/7.2.212.gz +-rw-r--r-- 1 root root 761 2009-06-24 14:51 ./source/ap/vim/patches/7.2.213.gz +-rw-r--r-- 1 root root 888 2009-06-24 15:05 ./source/ap/vim/patches/7.2.214.gz +-rw-r--r-- 1 root root 2692 2009-06-24 15:32 ./source/ap/vim/patches/7.2.215.gz +-rw-r--r-- 1 root root 1668 2009-06-24 15:51 ./source/ap/vim/patches/7.2.216.gz +-rw-r--r-- 1 root root 924 2009-06-24 16:08 ./source/ap/vim/patches/7.2.217.gz +-rw-r--r-- 1 root root 765 2009-06-24 16:32 ./source/ap/vim/patches/7.2.218.gz +-rw-r--r-- 1 root root 981 2009-07-01 14:13 ./source/ap/vim/patches/7.2.219.gz +-rw-r--r-- 1 root root 1189 2009-07-01 15:13 ./source/ap/vim/patches/7.2.220.gz +-rw-r--r-- 1 root root 2458 2009-07-01 16:02 ./source/ap/vim/patches/7.2.221.gz +-rw-r--r-- 1 root root 980 2009-07-01 18:19 ./source/ap/vim/patches/7.2.222.gz +-rw-r--r-- 1 root root 1935 2009-07-09 13:56 ./source/ap/vim/patches/7.2.223.gz +-rw-r--r-- 1 root root 1164 2009-07-09 16:16 ./source/ap/vim/patches/7.2.224.gz +-rw-r--r-- 1 root root 1237 2009-07-09 16:24 ./source/ap/vim/patches/7.2.225.gz +-rw-r--r-- 1 root root 2108 2009-07-09 18:06 ./source/ap/vim/patches/7.2.226.gz +-rw-r--r-- 1 root root 773 2009-07-09 18:14 ./source/ap/vim/patches/7.2.227.gz +-rw-r--r-- 1 root root 4016 2009-07-09 19:22 ./source/ap/vim/patches/7.2.228.gz +-rw-r--r-- 1 root root 776 2009-07-14 10:20 ./source/ap/vim/patches/7.2.229.gz +-rw-r--r-- 1 root root 932 2009-07-14 11:45 ./source/ap/vim/patches/7.2.230.gz +-rw-r--r-- 1 root root 827 2009-07-14 14:05 ./source/ap/vim/patches/7.2.231.gz +-rw-r--r-- 1 root root 1232 2009-07-14 15:39 ./source/ap/vim/patches/7.2.232.gz +-rw-r--r-- 1 root root 1228 2009-07-14 16:38 ./source/ap/vim/patches/7.2.233.gz +-rw-r--r-- 1 root root 1397 2009-07-14 19:42 ./source/ap/vim/patches/7.2.234.gz +-rw-r--r-- 1 root root 1129 2009-07-22 09:06 ./source/ap/vim/patches/7.2.235.gz +-rw-r--r-- 1 root root 1016 2009-07-22 09:17 ./source/ap/vim/patches/7.2.236.gz +-rw-r--r-- 1 root root 788 2009-07-22 11:28 ./source/ap/vim/patches/7.2.237.gz +-rw-r--r-- 1 root root 1526 2009-07-22 12:28 ./source/ap/vim/patches/7.2.238.gz +-rw-r--r-- 1 root root 1653 2009-07-22 14:23 ./source/ap/vim/patches/7.2.239.gz +-rw-r--r-- 1 root root 1074 2009-07-29 09:11 ./source/ap/vim/patches/7.2.240.gz +-rw-r--r-- 1 root root 2103 2009-07-29 10:11 ./source/ap/vim/patches/7.2.241.gz +-rw-r--r-- 1 root root 1091 2009-07-29 13:42 ./source/ap/vim/patches/7.2.242.gz +-rw-r--r-- 1 root root 954 2009-07-29 14:09 ./source/ap/vim/patches/7.2.243.gz +-rw-r--r-- 1 root root 1843 2009-07-29 16:07 ./source/ap/vim/patches/7.2.244.gz +-rw-r--r-- 1 root root 1759 2009-07-29 16:31 ./source/ap/vim/patches/7.2.245.gz +-rw-r--r-- 1 root root 866 2009-09-11 10:57 ./source/ap/vim/patches/7.2.246.gz +-rw-r--r-- 1 root root 1050 2009-09-11 10:21 ./source/ap/vim/patches/7.2.247.gz +-rw-r--r-- 1 root root 1551 2009-09-11 10:49 ./source/ap/vim/patches/7.2.248.gz +-rw-r--r-- 1 root root 816 2009-09-11 11:00 ./source/ap/vim/patches/7.2.249.gz +-rw-r--r-- 1 root root 836 2009-09-11 11:27 ./source/ap/vim/patches/7.2.250.gz +-rw-r--r-- 1 root root 1024 2009-09-11 11:45 ./source/ap/vim/patches/7.2.251.gz +-rw-r--r-- 1 root root 829 2009-09-11 12:03 ./source/ap/vim/patches/7.2.252.gz +-rw-r--r-- 1 root root 1394 2009-09-11 12:20 ./source/ap/vim/patches/7.2.253.gz +-rw-r--r-- 1 root root 810 2009-09-11 13:04 ./source/ap/vim/patches/7.2.254.gz +-rw-r--r-- 1 root root 881 2009-09-11 13:23 ./source/ap/vim/patches/7.2.255.gz +-rw-r--r-- 1 root root 856 2009-09-11 13:47 ./source/ap/vim/patches/7.2.256.gz +-rw-r--r-- 1 root root 994 2009-09-11 14:18 ./source/ap/vim/patches/7.2.257.gz +-rw-r--r-- 1 root root 922 2009-09-11 14:48 ./source/ap/vim/patches/7.2.258.gz +-rw-r--r-- 1 root root 1665 2009-09-11 15:24 ./source/ap/vim/patches/7.2.259.gz +-rw-r--r-- 1 root root 1352 2009-09-18 12:59 ./source/ap/vim/patches/7.2.260.gz +-rw-r--r-- 1 root root 1013 2009-09-18 13:18 ./source/ap/vim/patches/7.2.261.gz +-rw-r--r-- 1 root root 1924 2009-09-19 14:06 ./source/ap/vim/patches/7.2.262.gz +-rw-r--r-- 1 root root 1203 2009-09-23 15:36 ./source/ap/vim/patches/7.2.263.gz +-rw-r--r-- 1 root root 1791 2009-09-23 16:15 ./source/ap/vim/patches/7.2.264.gz +-rw-r--r-- 1 root root 919 2009-09-30 11:25 ./source/ap/vim/patches/7.2.265.gz +-rw-r--r-- 1 root root 2306 2009-09-30 13:22 ./source/ap/vim/patches/7.2.266.gz +-rw-r--r-- 1 root root 791 2009-10-07 14:21 ./source/ap/vim/patches/7.2.267.gz +-rw-r--r-- 1 root root 1155 2009-11-03 10:44 ./source/ap/vim/patches/7.2.268.gz +-rw-r--r-- 1 root root 2948 2009-11-03 11:12 ./source/ap/vim/patches/7.2.269.gz +-rw-r--r-- 1 root root 1109 2009-11-03 11:42 ./source/ap/vim/patches/7.2.270.gz +-rw-r--r-- 1 root root 1113 2009-11-03 11:56 ./source/ap/vim/patches/7.2.271.gz +-rw-r--r-- 1 root root 1073 2009-11-03 12:07 ./source/ap/vim/patches/7.2.272.gz +-rw-r--r-- 1 root root 1363 2009-11-03 13:27 ./source/ap/vim/patches/7.2.273.gz +-rw-r--r-- 1 root root 1553 2009-11-03 13:47 ./source/ap/vim/patches/7.2.274.gz +-rw-r--r-- 1 root root 1118 2009-11-03 14:34 ./source/ap/vim/patches/7.2.275.gz +-rw-r--r-- 1 root root 960 2009-11-03 15:04 ./source/ap/vim/patches/7.2.276.gz +-rw-r--r-- 1 root root 916 2009-11-03 15:24 ./source/ap/vim/patches/7.2.277.gz +-rw-r--r-- 1 root root 1037 2009-11-03 15:30 ./source/ap/vim/patches/7.2.278.gz +-rw-r--r-- 1 root root 1445 2009-11-03 15:44 ./source/ap/vim/patches/7.2.279.gz +-rw-r--r-- 1 root root 2208 2009-11-03 16:37 ./source/ap/vim/patches/7.2.280.gz +-rw-r--r-- 1 root root 986 2009-11-03 16:37 ./source/ap/vim/patches/7.2.281.gz +-rw-r--r-- 1 root root 824 2009-11-03 17:05 ./source/ap/vim/patches/7.2.282.gz +-rw-r--r-- 1 root root 1019 2009-11-03 17:14 ./source/ap/vim/patches/7.2.283.gz +-rw-r--r-- 1 root root 850 2009-11-03 17:49 ./source/ap/vim/patches/7.2.284.gz +-rw-r--r-- 1 root root 971 2009-11-11 12:23 ./source/ap/vim/patches/7.2.285.gz +-rw-r--r-- 1 root root 2344 2009-11-11 13:22 ./source/ap/vim/patches/7.2.286.gz +-rw-r--r-- 1 root root 838 2009-11-11 13:46 ./source/ap/vim/patches/7.2.287.gz +-rw-r--r-- 1 root root 860 2009-11-11 14:07 ./source/ap/vim/patches/7.2.288.gz +-rw-r--r-- 1 root root 1348 2009-11-11 15:23 ./source/ap/vim/patches/7.2.289.gz +-rw-r--r-- 1 root root 1917 2009-11-11 16:10 ./source/ap/vim/patches/7.2.290.gz +-rw-r--r-- 1 root root 737 2009-11-11 16:10 ./source/ap/vim/patches/7.2.291.gz +-rw-r--r-- 1 root root 747 2009-11-11 16:23 ./source/ap/vim/patches/7.2.292.gz +-rw-r--r-- 1 root root 919 2009-11-11 17:37 ./source/ap/vim/patches/7.2.293.gz +-rw-r--r-- 1 root root 2962 2009-11-17 11:09 ./source/ap/vim/patches/7.2.294.gz +-rw-r--r-- 1 root root 1503 2009-11-17 11:21 ./source/ap/vim/patches/7.2.295.gz +-rw-r--r-- 1 root root 833 2009-11-17 11:32 ./source/ap/vim/patches/7.2.296.gz +-rw-r--r-- 1 root root 943 2009-11-17 11:44 ./source/ap/vim/patches/7.2.297.gz +-rw-r--r-- 1 root root 882 2009-11-17 13:57 ./source/ap/vim/patches/7.2.298.gz +-rw-r--r-- 1 root root 856 2009-11-17 15:10 ./source/ap/vim/patches/7.2.299.gz +-rw-r--r-- 1 root root 2194 2009-11-17 16:14 ./source/ap/vim/patches/7.2.300.gz +-rw-r--r-- 1 root root 3357 2009-11-17 16:42 ./source/ap/vim/patches/7.2.301.gz +-rw-r--r-- 1 root root 1083 2009-11-17 16:57 ./source/ap/vim/patches/7.2.302.gz +-rw-r--r-- 1 root root 1086 2009-11-18 19:13 ./source/ap/vim/patches/7.2.303.gz +-rw-r--r-- 1 root root 920 2009-11-25 11:39 ./source/ap/vim/patches/7.2.304.gz +-rw-r--r-- 1 root root 1215 2009-11-25 12:07 ./source/ap/vim/patches/7.2.305.gz +-rw-r--r-- 1 root root 863 2009-11-25 16:15 ./source/ap/vim/patches/7.2.306.gz +-rw-r--r-- 1 root root 1948 2009-11-25 17:22 ./source/ap/vim/patches/7.2.307.gz +-rw-r--r-- 1 root root 1849 2009-11-25 18:53 ./source/ap/vim/patches/7.2.308.gz +-rw-r--r-- 1 root root 838 2009-11-26 19:41 ./source/ap/vim/patches/7.2.309.gz +-rw-r--r-- 1 root root 968 2009-12-02 11:10 ./source/ap/vim/patches/7.2.310.gz +-rw-r--r-- 1 root root 742 2009-12-02 12:32 ./source/ap/vim/patches/7.2.311.gz +-rw-r--r-- 1 root root 2636 2009-12-02 14:03 ./source/ap/vim/patches/7.2.312.gz +-rw-r--r-- 1 root root 1507 2009-12-02 16:14 ./source/ap/vim/patches/7.2.313.gz +-rw-r--r-- 1 root root 862 2009-12-02 16:47 ./source/ap/vim/patches/7.2.314.gz +-rw-r--r-- 1 root root 1220 2009-12-02 16:59 ./source/ap/vim/patches/7.2.315.gz +-rw-r--r-- 1 root root 1101 2009-12-16 16:15 ./source/ap/vim/patches/7.2.316.gz +-rw-r--r-- 1 root root 1790 2009-12-16 17:15 ./source/ap/vim/patches/7.2.317.gz +-rw-r--r-- 1 root root 1161 2009-12-16 17:41 ./source/ap/vim/patches/7.2.318.gz +-rw-r--r-- 1 root root 854 2009-12-16 17:50 ./source/ap/vim/patches/7.2.319.gz +-rw-r--r-- 1 root root 2130 2009-12-16 18:05 ./source/ap/vim/patches/7.2.320.gz +-rw-r--r-- 1 root root 999 2009-12-24 14:01 ./source/ap/vim/patches/7.2.321.gz +-rw-r--r-- 1 root root 830 2009-12-24 14:47 ./source/ap/vim/patches/7.2.322.gz +-rw-r--r-- 1 root root 1039 2009-12-24 15:12 ./source/ap/vim/patches/7.2.323.gz +-rw-r--r-- 1 root root 923 2009-12-31 12:18 ./source/ap/vim/patches/7.2.324.gz +-rw-r--r-- 1 root root 878 2009-12-31 13:53 ./source/ap/vim/patches/7.2.325.gz +-rw-r--r-- 1 root root 834 2010-01-06 17:07 ./source/ap/vim/patches/7.2.326.gz +-rw-r--r-- 1 root root 2491 2010-01-06 17:28 ./source/ap/vim/patches/7.2.327.gz +-rw-r--r-- 1 root root 721 2010-01-12 12:19 ./source/ap/vim/patches/7.2.328.gz +-rw-r--r-- 1 root root 775 2010-01-12 18:51 ./source/ap/vim/patches/7.2.329.gz +-rw-r--r-- 1 root root 10262 2010-01-12 18:51 ./source/ap/vim/patches/7.2.330.gz +-rw-r--r-- 1 root root 760 2010-01-19 12:01 ./source/ap/vim/patches/7.2.331.gz +-rw-r--r-- 1 root root 1344 2010-01-19 12:08 ./source/ap/vim/patches/7.2.332.gz +-rw-r--r-- 1 root root 3365 2010-01-19 13:59 ./source/ap/vim/patches/7.2.333.gz +-rw-r--r-- 1 root root 2550 2010-01-19 14:13 ./source/ap/vim/patches/7.2.334.gz +-rw-r--r-- 1 root root 1180 2010-01-19 14:24 ./source/ap/vim/patches/7.2.335.gz +-rw-r--r-- 1 root root 7099 2010-01-19 14:52 ./source/ap/vim/patches/7.2.336.gz +-rw-r--r-- 1 root root 1208 2010-01-19 15:13 ./source/ap/vim/patches/7.2.337.gz +-rw-r--r-- 1 root root 1256 2010-01-19 15:22 ./source/ap/vim/patches/7.2.338.gz +-rw-r--r-- 1 root root 878 2010-01-19 16:26 ./source/ap/vim/patches/7.2.339.gz +-rw-r--r-- 1 root root 745 2010-01-19 16:26 ./source/ap/vim/patches/7.2.340.gz +-rw-r--r-- 1 root root 1008 2010-01-19 16:58 ./source/ap/vim/patches/7.2.341.gz +-rw-r--r-- 1 root root 1093 2010-01-19 17:06 ./source/ap/vim/patches/7.2.342.gz +-rw-r--r-- 1 root root 699 2010-01-19 22:35 ./source/ap/vim/patches/7.2.343.gz +-rw-r--r-- 1 root root 839 2010-01-20 20:42 ./source/ap/vim/patches/7.2.344.gz +-rw-r--r-- 1 root root 727 2010-01-27 14:57 ./source/ap/vim/patches/7.2.345.gz +-rw-r--r-- 1 root root 1139 2010-01-27 15:28 ./source/ap/vim/patches/7.2.346.gz +-rw-r--r-- 1 root root 1462 2010-01-27 16:32 ./source/ap/vim/patches/7.2.347.gz +-rw-r--r-- 1 root root 2407 2010-01-27 17:30 ./source/ap/vim/patches/7.2.348.gz +-rw-r--r-- 1 root root 824 2010-01-27 19:27 ./source/ap/vim/patches/7.2.349.gz +-rw-r--r-- 1 root root 1244 2010-01-27 20:06 ./source/ap/vim/patches/7.2.350.gz +-rw-r--r-- 1 root root 944 2010-01-28 21:59 ./source/ap/vim/patches/7.2.351.gz +-rw-r--r-- 1 root root 892 2010-02-03 11:24 ./source/ap/vim/patches/7.2.352.gz +-rw-r--r-- 1 root root 1923 2010-02-03 14:14 ./source/ap/vim/patches/7.2.353.gz +-rw-r--r-- 1 root root 988 2010-02-03 14:48 ./source/ap/vim/patches/7.2.354.gz +-rw-r--r-- 1 root root 1081 2010-02-03 17:15 ./source/ap/vim/patches/7.2.355.gz +-rw-r--r-- 1 root root 1036 2010-02-03 17:15 ./source/ap/vim/patches/7.2.356.gz +-rw-r--r-- 1 root root 846 2010-02-11 16:04 ./source/ap/vim/patches/7.2.357.gz +-rw-r--r-- 1 root root 1045 2010-02-11 17:21 ./source/ap/vim/patches/7.2.358.gz +-rw-r--r-- 1 root root 918 2010-02-11 18:01 ./source/ap/vim/patches/7.2.359.gz +-rw-r--r-- 1 root root 1212 2010-02-17 14:13 ./source/ap/vim/patches/7.2.360.gz +-rw-r--r-- 1 root root 5554 2010-02-17 15:24 ./source/ap/vim/patches/7.2.361.gz +-rw-r--r-- 1 root root 1346 2010-02-17 15:32 ./source/ap/vim/patches/7.2.362.gz +-rw-r--r-- 1 root root 1031 2010-02-17 15:37 ./source/ap/vim/patches/7.2.363.gz +-rw-r--r-- 1 root root 1180 2010-02-17 16:25 ./source/ap/vim/patches/7.2.364.gz +-rw-r--r-- 1 root root 880 2010-02-17 16:35 ./source/ap/vim/patches/7.2.365.gz +-rw-r--r-- 1 root root 1249 2010-02-17 17:21 ./source/ap/vim/patches/7.2.366.gz +-rw-r--r-- 1 root root 1210 2010-02-17 17:28 ./source/ap/vim/patches/7.2.367.gz +-rw-r--r-- 1 root root 825 2010-02-18 14:54 ./source/ap/vim/patches/7.2.368.gz +-rw-r--r-- 1 root root 947 2010-02-24 13:00 ./source/ap/vim/patches/7.2.369.gz +-rw-r--r-- 1 root root 1713 2010-02-24 13:35 ./source/ap/vim/patches/7.2.370.gz +-rw-r--r-- 1 root root 2972 2010-02-24 13:47 ./source/ap/vim/patches/7.2.371.gz +-rw-r--r-- 1 root root 3033 2010-02-24 14:08 ./source/ap/vim/patches/7.2.372.gz +-rw-r--r-- 1 root root 1032 2010-02-24 14:26 ./source/ap/vim/patches/7.2.373.gz +-rw-r--r-- 1 root root 1695 2010-02-24 14:49 ./source/ap/vim/patches/7.2.374.gz +-rw-r--r-- 1 root root 862 2010-02-24 15:59 ./source/ap/vim/patches/7.2.375.gz +-rw-r--r-- 1 root root 810 2010-02-24 16:22 ./source/ap/vim/patches/7.2.376.gz +-rw-r--r-- 1 root root 957 2010-02-26 21:06 ./source/ap/vim/patches/7.2.377.gz +-rw-r--r-- 1 root root 1251 2010-03-02 11:37 ./source/ap/vim/patches/7.2.378.gz +-rw-r--r-- 1 root root 848 2010-03-02 11:48 ./source/ap/vim/patches/7.2.379.gz +-rw-r--r-- 1 root root 1250 2010-03-02 14:15 ./source/ap/vim/patches/7.2.380.gz +-rw-r--r-- 1 root root 2430 2010-03-02 14:56 ./source/ap/vim/patches/7.2.381.gz +-rw-r--r-- 1 root root 875 2010-03-02 16:25 ./source/ap/vim/patches/7.2.382.gz +-rw-r--r-- 1 root root 1207 2010-03-02 17:00 ./source/ap/vim/patches/7.2.383.gz +-rw-r--r-- 1 root root 896 2010-03-02 17:00 ./source/ap/vim/patches/7.2.384.gz +-rw-r--r-- 1 root root 1025 2010-03-02 17:16 ./source/ap/vim/patches/7.2.385.gz +-rw-r--r-- 1 root root 1109 2010-03-10 11:26 ./source/ap/vim/patches/7.2.386.gz +-rw-r--r-- 1 root root 2015 2010-03-10 11:47 ./source/ap/vim/patches/7.2.387.gz +-rw-r--r-- 1 root root 980 2010-03-10 12:21 ./source/ap/vim/patches/7.2.388.gz +-rw-r--r-- 1 root root 1730 2010-03-10 12:44 ./source/ap/vim/patches/7.2.389.gz +-rw-r--r-- 1 root root 1125 2010-03-10 13:16 ./source/ap/vim/patches/7.2.390.gz +-rw-r--r-- 1 root root 1312 2010-03-10 13:47 ./source/ap/vim/patches/7.2.391.gz +-rw-r--r-- 1 root root 1884 2010-03-10 15:13 ./source/ap/vim/patches/7.2.392.gz +-rw-r--r-- 1 root root 2666 2010-03-10 15:28 ./source/ap/vim/patches/7.2.393.gz +-rw-r--r-- 1 root root 1228 2010-03-10 16:17 ./source/ap/vim/patches/7.2.394.gz +-rw-r--r-- 1 root root 775 2010-03-17 12:08 ./source/ap/vim/patches/7.2.395.gz +-rw-r--r-- 1 root root 721 2010-03-17 13:49 ./source/ap/vim/patches/7.2.396.gz +-rw-r--r-- 1 root root 757 2010-03-17 15:46 ./source/ap/vim/patches/7.2.397.gz +-rw-r--r-- 1 root root 1263 2010-03-17 15:55 ./source/ap/vim/patches/7.2.398.gz +-rw-r--r-- 1 root root 798 2010-03-17 16:26 ./source/ap/vim/patches/7.2.399.gz +-rw-r--r-- 1 root root 2753 2010-03-17 17:17 ./source/ap/vim/patches/7.2.400.gz +-rw-r--r-- 1 root root 971 2010-03-17 18:14 ./source/ap/vim/patches/7.2.401.gz +-rw-r--r-- 1 root root 1179 2010-03-17 18:57 ./source/ap/vim/patches/7.2.402.gz +-rw-r--r-- 1 root root 747 2010-03-19 22:09 ./source/ap/vim/patches/7.2.403.gz +-rw-r--r-- 1 root root 906 2010-03-23 12:58 ./source/ap/vim/patches/7.2.404.gz +-rw-r--r-- 1 root root 811 2010-03-23 13:40 ./source/ap/vim/patches/7.2.405.gz +-rw-r--r-- 1 root root 1683 2010-03-23 14:37 ./source/ap/vim/patches/7.2.406.gz +-rw-r--r-- 1 root root 976 2010-03-23 15:28 ./source/ap/vim/patches/7.2.407.gz +-rw-r--r-- 1 root root 1037 2010-03-23 16:37 ./source/ap/vim/patches/7.2.408.gz +-rw-r--r-- 1 root root 951 2010-03-23 16:50 ./source/ap/vim/patches/7.2.409.gz +-rw-r--r-- 1 root root 1148 2010-03-23 17:07 ./source/ap/vim/patches/7.2.410.gz +-rw-r--r-- 1 root root 802 2010-03-23 17:23 ./source/ap/vim/patches/7.2.411.gz +-rw-r--r-- 1 root root 1181 2010-05-07 13:53 ./source/ap/vim/patches/7.2.412.gz +-rw-r--r-- 1 root root 2596 2010-05-07 14:07 ./source/ap/vim/patches/7.2.413.gz +-rw-r--r-- 1 root root 1042 2010-05-07 14:19 ./source/ap/vim/patches/7.2.414.gz +-rw-r--r-- 1 root root 975 2010-05-07 14:36 ./source/ap/vim/patches/7.2.415.gz +-rw-r--r-- 1 root root 1023 2010-05-07 14:55 ./source/ap/vim/patches/7.2.416.gz +-rw-r--r-- 1 root root 839 2006-07-21 04:09 ./source/ap/vim/slack-desc.vim +-rw-r--r-- 1 root root 964 2006-07-21 06:24 ./source/ap/vim/slack-desc.vim-gvim +-rw-r--r-- 1 root root 565740 2008-08-09 16:48 ./source/ap/vim/vim-7.2-lang.tar.xz +-rw-r--r-- 1 root root 5866332 2008-09-06 14:35 ./source/ap/vim/vim-7.2.tar.xz +-rwxr-xr-x 1 root root 6581 2010-03-11 22:02 ./source/ap/vim/vim-gvim.SlackBuild +-rw-r--r-- 1 root root 98451 2010-05-10 23:01 ./source/ap/vim/vim-runtime-syntax-20100510.diff.gz +-rwxr-xr-x 1 root root 6876 2010-03-11 22:02 ./source/ap/vim/vim.SlackBuild +-rw-r--r-- 1 root root 303 2009-05-28 18:19 ./source/ap/vim/vim.vimrc.diff.gz +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/vorbis-tools +-rw-r--r-- 1 root root 1071 2003-12-19 00:21 ./source/ap/vorbis-tools/slack-desc +-rw-r--r-- 1 root root 739539 2008-03-03 06:30 ./source/ap/vorbis-tools/vorbis-tools-1.2.0.tar.bz2 +-rwxr-xr-x 1 root root 2426 2009-05-19 20:05 ./source/ap/vorbis-tools/vorbis-tools.SlackBuild +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/ap/workbone +-rw-r--r-- 1 root root 689 2002-03-23 22:37 ./source/ap/workbone/slack-desc +-rw-r--r-- 1 root root 262 2003-02-14 08:22 ./source/ap/workbone/workbone.1.diff.gz +-rwxr-xr-x 1 root root 2275 2009-05-19 20:05 ./source/ap/workbone/workbone.SlackBuild +-rw-r--r-- 1 root root 3330 2002-04-24 15:17 ./source/ap/workbone/workbone_2.40-3.diff.gz +-rw-r--r-- 1 root root 21877 1998-10-15 07:00 ./source/ap/workbone/workbone_2.40.orig.tar.gz +drwxr-xr-x 2 root root 4096 2010-02-09 21:14 ./source/ap/xfsdump +-rw-r--r-- 1 root root 983 2006-02-22 20:00 ./source/ap/xfsdump/slack-desc +-rw-r--r-- 1 root root 560656 2010-01-13 01:53 ./source/ap/xfsdump/xfsdump-3.0.4.tar.xz +-rwxr-xr-x 1 root root 3906 2010-02-09 21:26 ./source/ap/xfsdump/xfsdump.SlackBuild +-rw-r--r-- 1 root root 473 2010-02-09 21:18 ./source/ap/xfsdump/xfsdump.destdir.diff.gz +drwxr-xr-x 2 root root 4096 2009-07-15 04:39 ./source/ap/zsh +-rw-r--r-- 1 root root 140 2007-04-10 01:12 ./source/ap/zsh/doinst.sh.gz +-rw-r--r-- 1 root root 962 2002-02-14 08:13 ./source/ap/zsh/slack-desc +-rw-r--r-- 1 root root 560 2009-07-15 04:38 ./source/ap/zsh/zsh-4.3.10-add_new_pkg_completion.diff.gz +-rw-r--r-- 1 root root 2533240 2009-07-15 04:33 ./source/ap/zsh/zsh-4.3.10-doc.tar.xz +-rw-r--r-- 1 root root 2302728 2009-07-15 04:34 ./source/ap/zsh/zsh-4.3.10.tar.xz +-rwxr-xr-x 1 root root 3391 2009-07-16 00:05 ./source/ap/zsh/zsh.SlackBuild +drwxr-xr-x 39 root root 4096 2010-05-18 06:45 ./source/d +drwxr-xr-x 2 root root 4096 2010-01-12 20:09 ./source/d/autoconf +-rw-r--r-- 1 root root 1132092 2009-11-21 14:51 ./source/d/autoconf/autoconf-2.65.tar.xz +-rw-r--r-- 1 root root 256 2009-11-21 14:51 ./source/d/autoconf/autoconf-2.65.tar.xz.sig +-rwxr-xr-x 1 root root 2522 2010-01-12 20:10 ./source/d/autoconf/autoconf.SlackBuild +-rw-r--r-- 1 root root 339 2001-05-30 01:40 ./source/d/autoconf/doinst.sh.gz +-rw-r--r-- 1 root root 1090 2002-03-23 22:38 ./source/d/autoconf/slack-desc +drwxr-xr-x 2 root root 4096 2010-01-12 20:12 ./source/d/automake +-rw-r--r-- 1 root root 934172 2009-12-08 21:43 ./source/d/automake/automake-1.11.1.tar.xz +-rwxr-xr-x 1 root root 2852 2009-12-10 04:17 ./source/d/automake/automake.SlackBuild +-rw-r--r-- 1 root root 348 2001-05-30 01:49 ./source/d/automake/doinst.sh.gz +-rw-r--r-- 1 root root 1086 2002-03-23 22:39 ./source/d/automake/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-25 21:41 ./source/d/binutils +-rw-r--r-- 1 root root 248 2010-04-13 13:33 ./source/d/binutils/binutils-2.20.51.0.8.tar.sign +-rw-r--r-- 1 root root 11957216 2010-04-13 13:33 ./source/d/binutils/binutils-2.20.51.0.8.tar.xz +-rwxr-xr-x 1 root root 4653 2010-04-25 21:49 ./source/d/binutils/binutils.SlackBuild +-rw-r--r-- 1 root root 16092 2010-04-13 22:23 ./source/d/binutils/release.binutils-2.20.51.0.8 +-rw-r--r-- 1 root root 902 2002-03-22 21:41 ./source/d/binutils/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-27 14:25 ./source/d/bison +-rw-r--r-- 1 root root 1616117 2010-03-20 19:18 ./source/d/bison/bison-2.4.2.tar.bz2 +-rw-r--r-- 1 root root 65 2010-03-20 19:18 ./source/d/bison/bison-2.4.2.tar.bz2.sig +-rwxr-xr-x 1 root root 2894 2010-04-27 14:26 ./source/d/bison/bison.SlackBuild +-rw-r--r-- 1 root root 927 2002-03-23 22:41 ./source/d/bison/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/ccache +-rw-r--r-- 1 root root 86363 2004-09-13 20:14 ./source/d/ccache/ccache-2.4.tar.gz +-rwxr-xr-x 1 root root 2171 2009-05-19 20:05 ./source/d/ccache/ccache.SlackBuild +-rw-r--r-- 1 root root 771 2003-03-18 06:44 ./source/d/ccache/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-03 07:00 ./source/d/clisp +-rw-r--r-- 1 root root 7885098 2009-07-28 18:04 ./source/d/clisp/clisp-2.48.tar.bz2 +-rw-r--r-- 1 root root 72 2009-07-28 18:04 ./source/d/clisp/clisp-2.48.tar.bz2.sig +-rwxr-xr-x 1 root root 5799 2010-05-03 07:01 ./source/d/clisp/clisp.SlackBuild +-rw-r--r-- 1 root root 898945 2008-09-11 09:39 ./source/d/clisp/ffcall-20080704cvs.tar.bz2 +-rw-r--r-- 1 root root 264500 2009-12-11 14:04 ./source/d/clisp/libsigsegv-2.8.tar.xz +-rw-r--r-- 1 root root 1121 2003-07-17 21:01 ./source/d/clisp/slack-desc +-rwxr-xr-x 1 root root 242 2008-09-11 11:59 ./source/d/clisp/source.download +drwxr-xr-x 2 root root 4096 2010-04-16 18:06 ./source/d/cmake +-rw-r--r-- 1 root root 2525408 2010-04-06 18:37 ./source/d/cmake/cmake-2.8.1.tar.xz +-rwxr-xr-x 1 root root 3475 2010-04-16 18:31 ./source/d/cmake/cmake.SlackBuild +-rw-r--r-- 1 root root 852 2008-04-09 20:37 ./source/d/cmake/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-03 07:14 ./source/d/cscope +-rw-r--r-- 1 root root 361214 2009-04-30 20:14 ./source/d/cscope/cscope-15.7a.tar.bz2 +-rwxr-xr-x 1 root root 2952 2010-05-03 07:16 ./source/d/cscope/cscope.SlackBuild +-rw-r--r-- 1 root root 805 2003-08-20 00:37 ./source/d/cscope/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/cvs +-rw-r--r-- 1 root root 2942652 2008-05-08 04:58 ./source/d/cvs/cvs-1.11.23.tar.bz2 +-rw-r--r-- 1 root root 65 2008-05-08 04:58 ./source/d/cvs/cvs-1.11.23.tar.bz2.sig +-rwxr-xr-x 1 root root 2850 2009-05-19 20:05 ./source/d/cvs/cvs.SlackBuild +-rw-r--r-- 1 root root 992 2002-02-23 03:00 ./source/d/cvs/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/d/dev86 +-rw-r--r-- 1 root root 703028 2007-10-16 12:48 ./source/d/dev86/Dev86src-0.16.17.tar.gz +-rw-r--r-- 1 root root 408 2008-03-28 23:59 ./source/d/dev86/README +-rw-r--r-- 1 root root 361 2008-09-23 19:43 ./source/d/dev86/dev86-x86_64.noelks.patch.gz +-rw-r--r-- 1 root root 342 2008-09-22 21:52 ./source/d/dev86/dev86-x86_64.patch.gz +-rwxr-xr-x 1 root root 3352 2009-05-23 00:41 ./source/d/dev86/dev86.SlackBuild +-rw-r--r-- 1 root root 312 2008-03-29 05:05 ./source/d/dev86/dev86.info +-rw-r--r-- 1 root root 490 2008-09-18 05:36 ./source/d/dev86/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/distcc +-rw-r--r-- 1 root root 341601 2004-12-22 00:09 ./source/d/distcc/distcc-2.18.3.tar.bz2 +-rw-r--r-- 1 root root 189 2004-12-22 00:09 ./source/d/distcc/distcc-2.18.3.tar.bz2.asc +-rwxr-xr-x 1 root root 2645 2009-05-19 20:05 ./source/d/distcc/distcc.SlackBuild +-rw-r--r-- 1 root root 940 2003-02-19 22:05 ./source/d/distcc/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-23 21:35 ./source/d/doxygen +-rw-r--r-- 1 root root 2577476 2010-02-21 10:58 ./source/d/doxygen/doxygen-1.6.3.src.tar.xz +-rwxr-xr-x 1 root root 3332 2010-02-23 21:36 ./source/d/doxygen/doxygen.SlackBuild +-rw-r--r-- 1 root root 969 2008-02-11 03:44 ./source/d/doxygen/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/flex +-rw-r--r-- 1 root root 1256501 2008-02-26 21:40 ./source/d/flex/flex-2.5.35.tar.bz2 +-rwxr-xr-x 1 root root 3290 2009-05-19 20:05 ./source/d/flex/flex.SlackBuild +-rw-r--r-- 1 root root 786 2006-09-20 03:05 ./source/d/flex/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-12 03:20 ./source/d/gcc +-rw-r--r-- 1 root root 1377431 2007-07-27 21:07 ./source/d/gcc/ecj-4.3.jar +-rw-r--r-- 1 root root 48815220 2010-04-29 12:03 ./source/d/gcc/gcc-4.4.4.tar.xz +-rw-r--r-- 1 root root 522 2009-01-29 07:18 ./source/d/gcc/gcc-no_fixincludes.diff.gz +-rwxr-xr-x 1 root root 22274 2010-05-12 03:00 ./source/d/gcc/gcc.SlackBuild +-rw-r--r-- 1 root root 756 2002-02-21 23:00 ./source/d/gcc/slack-desc.gcc +-rw-r--r-- 1 root root 753 2002-02-21 23:00 ./source/d/gcc/slack-desc.gcc-g++ +-rw-r--r-- 1 root root 1231 2007-11-08 22:00 ./source/d/gcc/slack-desc.gcc-gfortran +-rw-r--r-- 1 root root 843 2006-07-30 03:26 ./source/d/gcc/slack-desc.gcc-gnat +-rw-r--r-- 1 root root 817 2006-07-30 03:26 ./source/d/gcc/slack-desc.gcc-java +-rw-r--r-- 1 root root 962 2006-07-30 03:27 ./source/d/gcc/slack-desc.gcc-objc +drwxr-xr-x 2 root root 4096 2010-04-29 03:37 ./source/d/gdb +-rw-r--r-- 1 root root 13575556 2010-03-18 21:27 ./source/d/gdb/gdb-7.1.tar.xz +-rwxr-xr-x 1 root root 3783 2010-04-29 04:03 ./source/d/gdb/gdb.SlackBuild +-rw-r--r-- 1 root root 1211 2008-02-11 03:44 ./source/d/gdb/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-29 01:53 ./source/d/git +-rw-r--r-- 1 root root 248 2010-04-24 02:38 ./source/d/git/git-1.7.1.tar.sign +-rw-r--r-- 1 root root 2224728 2010-04-24 02:38 ./source/d/git/git-1.7.1.tar.xz +-rwxr-xr-x 1 root root 4738 2010-01-28 21:26 ./source/d/git/git.SlackBuild +-rw-r--r-- 1 root root 851 2009-05-30 01:25 ./source/d/git/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/gperf +-rw-r--r-- 1 root root 708380 2007-05-08 16:14 ./source/d/gperf/gperf-3.0.3.tar.bz2 +-rwxr-xr-x 1 root root 3061 2009-05-19 20:05 ./source/d/gperf/gperf.SlackBuild +-rw-r--r-- 1 root root 1018 2007-02-14 20:50 ./source/d/gperf/slack-desc +drwxr-xr-x 2 root root 4096 2009-08-10 23:18 ./source/d/guile +-rw-r--r-- 1 root root 2303124 2009-07-05 20:52 ./source/d/guile/guile-1.8.7.tar.xz +-rwxr-xr-x 1 root root 3359 2010-02-24 02:42 ./source/d/guile/guile.SlackBuild +-rw-r--r-- 1 root root 894 2008-02-11 03:44 ./source/d/guile/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/indent +-rw-r--r-- 1 root root 531879 2009-03-04 04:05 ./source/d/indent/indent-2.2.10.tar.bz2 +-rwxr-xr-x 1 root root 3283 2009-05-19 20:05 ./source/d/indent/indent.SlackBuild +-rw-r--r-- 1 root root 889 2009-03-04 04:05 ./source/d/indent/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-28 14:35 ./source/d/intltool +-rw-r--r-- 1 root root 140340 2009-03-14 19:25 ./source/d/intltool/intltool-0.40.6.tar.bz2 +-rwxr-xr-x 1 root root 3802 2010-04-30 03:00 ./source/d/intltool/intltool.SlackBuild +-rw-r--r-- 1 root root 692 2008-09-18 04:58 ./source/d/intltool/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-29 19:19 ./source/d/kernel-headers +-rw-r--r-- 1 root root 797 2003-09-04 03:56 ./source/d/kernel-headers/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-07 00:15 ./source/d/libtool +-rw-r--r-- 1 root root 385 2009-05-30 01:28 ./source/d/libtool/doinst.sh.gz +-rw-r--r-- 1 root root 739260 2009-11-17 14:03 ./source/d/libtool/libtool-2.2.6b.tar.xz +-rwxr-xr-x 1 root root 3089 2010-05-10 01:02 ./source/d/libtool/libtool.SlackBuild +-rw-r--r-- 1 root root 499 2010-02-07 00:13 ./source/d/libtool/libtool.no.moved.warning.diff.gz +-rw-r--r-- 1 root root 958 2009-05-30 01:28 ./source/d/libtool/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-27 16:17 ./source/d/m4 +-rw-r--r-- 1 root root 930092 2010-02-25 13:04 ./source/d/m4/m4-1.4.14.tar.xz +-rwxr-xr-x 1 root root 3729 2010-04-27 16:18 ./source/d/m4/m4.SlackBuild +-rw-r--r-- 1 root root 928 2008-10-15 04:26 ./source/d/m4/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/make +-rw-r--r-- 1 root root 1151445 2006-04-01 06:48 ./source/d/make/make-3.81.tar.bz2 +-rw-r--r-- 1 root root 65 2006-04-01 06:49 ./source/d/make/make-3.81.tar.bz2.sig +-rwxr-xr-x 1 root root 2696 2009-05-19 20:05 ./source/d/make/make.SlackBuild +-rw-r--r-- 1 root root 923 2002-03-23 22:51 ./source/d/make/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-18 06:20 ./source/d/mercurial +-rw-r--r-- 1 root root 279 2010-05-18 06:20 ./source/d/mercurial/doinst.sh.gz +-rw-r--r-- 1 root root 1090712 2010-05-01 21:03 ./source/d/mercurial/mercurial-1.5.2.tar.xz +-rwxr-xr-x 1 root root 3734 2010-05-18 06:37 ./source/d/mercurial/mercurial.SlackBuild +-rw-r--r-- 1 root root 1253 2006-05-14 00:35 ./source/d/mercurial/slack-desc +drwxr-xr-x 2 root root 4096 2010-01-19 19:55 ./source/d/nasm +-rw-r--r-- 1 root root 779934 2009-07-20 05:22 ./source/d/nasm/nasm-2.07.tar.bz2 +-rwxr-xr-x 1 root root 2699 2010-01-19 19:56 ./source/d/nasm/nasm.SlackBuild +-rw-r--r-- 1 root root 765 2002-05-28 01:27 ./source/d/nasm/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-12 00:09 ./source/d/oprofile +-rw-r--r-- 1 root root 788892 2009-11-24 16:34 ./source/d/oprofile/oprofile-0.9.6.tar.xz +-rwxr-xr-x 1 root root 4153 2010-04-25 21:50 ./source/d/oprofile/oprofile.SlackBuild +-rw-r--r-- 1 root root 14520 2009-06-29 10:07 ./source/d/oprofile/oprofile.qt4.diff.gz +-rw-r--r-- 1 root root 965 2003-09-08 04:40 ./source/d/oprofile/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/p2c +-rw-r--r-- 1 root root 409 2007-06-02 17:34 ./source/d/p2c/_p2c.tar.gz +-rw-r--r-- 1 root root 423399 1996-07-04 13:29 ./source/d/p2c/p2c-1.21alpha2.tar.gz +-rwxr-xr-x 1 root root 4107 2009-05-19 20:05 ./source/d/p2c/p2c.SlackBuild +-rw-r--r-- 1 root root 268 2007-06-02 17:54 ./source/d/p2c/p2c.examples.diff.gz +-rw-r--r-- 1 root root 4450 2005-05-05 14:47 ./source/d/p2c/p2c_1.21alpha2-2.1.diff.gz +-rw-r--r-- 1 root root 168 2008-10-31 22:43 ./source/d/p2c/p2c_time.diff.gz +-rw-r--r-- 1 root root 1000 2002-03-23 22:52 ./source/d/p2c/slack-desc +drwxr-xr-x 2 root root 4096 2009-10-02 19:15 ./source/d/perl +-rw-r--r-- 1 root root 129065 2009-09-16 18:37 ./source/d/perl/DBD-mysql-4.013.tar.gz +-rw-r--r-- 1 root root 510309 2009-06-08 10:29 ./source/d/perl/DBI-1.609.tar.gz +-rw-r--r-- 1 root root 97180 2009-08-14 19:45 ./source/d/perl/URI-1.40.tar.gz +-rw-r--r-- 1 root root 230002 2007-11-20 14:35 ./source/d/perl/XML-Parser-2.36.tar.gz +-rw-r--r-- 1 root root 71129 2007-08-15 10:39 ./source/d/perl/XML-Simple-2.18.tar.gz +-rw-r--r-- 1 root root 8839364 2009-08-23 14:21 ./source/d/perl/perl-5.10.1.tar.xz +-rwxr-xr-x 1 root root 8611 2009-10-02 19:39 ./source/d/perl/perl.SlackBuild +-rw-r--r-- 1 root root 606 2008-09-21 00:04 ./source/d/perl/perl.configure.multilib.patch.gz +-rw-r--r-- 1 root root 971 2002-07-23 05:23 ./source/d/perl/slack-desc +drwxr-xr-x 3 root root 4096 2009-06-06 21:40 ./source/d/pkg-config +-rw-r--r-- 1 root root 143 2008-04-09 21:47 ./source/d/pkg-config/doinst.sh.gz +-rw-r--r-- 1 root root 749443 2008-01-16 22:54 ./source/d/pkg-config/pkg-config-0.23.tar.bz2 +-rwxr-xr-x 1 root root 3092 2009-06-06 21:18 ./source/d/pkg-config/pkg-config.SlackBuild +drwxr-xr-x 2 root root 4096 2006-08-20 04:13 ./source/d/pkg-config/scripts +-rwxr-xr-x 1 root root 194 2007-05-24 05:41 ./source/d/pkg-config/scripts/pkgconfig.csh +-rwxr-xr-x 1 root root 204 2007-05-24 05:41 ./source/d/pkg-config/scripts/pkgconfig.sh +-rw-r--r-- 1 root root 907 2008-02-11 03:44 ./source/d/pkg-config/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/pmake +-rw-r--r-- 1 root root 264383 2005-07-07 09:32 ./source/d/pmake/pmake-1.111.tar.gz +-rwxr-xr-x 1 root root 3801 2009-05-19 20:05 ./source/d/pmake/pmake.SlackBuild +-rw-r--r-- 1 root root 265 2007-03-24 23:38 ./source/d/pmake/pmake.strerror.strdup.diff.gz +-rw-r--r-- 1 root root 38071 2007-02-09 20:45 ./source/d/pmake/pmake.txt.gz +-rw-r--r-- 1 root root 26675 2005-07-07 09:32 ./source/d/pmake/pmake_1.111-1.diff.gz +-rw-r--r-- 1 root root 795 2007-02-09 21:04 ./source/d/pmake/slack-desc +drwxr-xr-x 2 root root 4096 2009-12-06 01:57 ./source/d/python +-rw-r--r-- 1 root root 9048464 2009-10-26 02:11 ./source/d/python/Python-2.6.4.tar.xz +-rw-r--r-- 1 root root 1307820 2009-10-30 06:44 ./source/d/python/python-2.6.4-docs-text.tar.xz +-rwxr-xr-x 1 root root 4668 2009-12-06 01:57 ./source/d/python/python.SlackBuild +-rw-r--r-- 1 root root 477 2009-04-29 20:18 ./source/d/python/python.pure64.diff.gz +-rw-r--r-- 1 root root 325 2009-06-09 19:23 ./source/d/python/python.readline.set_pre_input_hook.diff.gz +-rw-r--r-- 1 root root 2164 2009-04-29 20:12 ./source/d/python/python.x86_64.diff.gz +-rw-r--r-- 1 root root 895 2002-03-23 22:54 ./source/d/python/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/rcs +-rw-r--r-- 1 root root 10982 2007-06-27 22:53 ./source/d/rcs/_rcs.tar.gz +-rw-r--r-- 1 root root 270 1995-08-12 19:26 ./source/d/rcs/rcs-5.7.diff.gz +-rw-r--r-- 1 root root 282413 1995-06-16 14:53 ./source/d/rcs/rcs-5.7.tar.gz +-rwxr-xr-x 1 root root 3037 2010-01-25 22:14 ./source/d/rcs/rcs.SlackBuild +-rw-r--r-- 1 root root 776 2002-03-23 22:58 ./source/d/rcs/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-25 23:01 ./source/d/ruby +-rw-r--r-- 1 root root 5533480 2010-01-10 11:45 ./source/d/ruby/ruby-1.9.1-p378.tar.xz +-rwxr-xr-x 1 root root 4276 2010-04-25 23:00 ./source/d/ruby/ruby.SlackBuild +-rw-r--r-- 1 root root 865 2006-07-20 06:49 ./source/d/ruby/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/strace +-rw-r--r-- 1 root root 1007 2002-04-06 20:28 ./source/d/strace/slack-desc +-rw-r--r-- 1 root root 480973 2008-08-29 00:40 ./source/d/strace/strace-4.5.18.tar.bz2 +-rwxr-xr-x 1 root root 2446 2009-05-19 20:05 ./source/d/strace/strace.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-30 02:09 ./source/d/subversion +-rwxr-xr-x 1 root root 185 2009-05-30 01:45 ./source/d/subversion/get-svn-book.sh +-rw-r--r-- 1 root root 1058 2010-04-30 02:11 ./source/d/subversion/slack-desc +-rw-r--r-- 1 root root 4426536 2010-04-20 15:30 ./source/d/subversion/subversion-1.6.11.tar.xz +-rwxr-xr-x 1 root root 5452 2010-02-20 19:24 ./source/d/subversion/subversion.SlackBuild +-rw-r--r-- 1 root root 415029 2010-04-29 06:03 ./source/d/subversion/svn-book-html.tar.bz2 +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/d/swig +-rw-r--r-- 1 root root 1018 2009-03-08 02:10 ./source/d/swig/slack-desc +-rw-r--r-- 1 root root 3888548 2009-01-31 23:59 ./source/d/swig/swig-1.3.38.tar.bz2 +-rwxr-xr-x 1 root root 3231 2009-05-19 20:05 ./source/d/swig/swig.SlackBuild +-rw-r--r-- 1 root root 61 2009-02-23 00:35 ./source/d/swig/swig.url +drwxr-xr-x 3 root root 4096 2010-03-16 04:13 ./source/e +drwxr-xr-x 2 root root 4096 2010-05-08 20:44 ./source/e/emacs +-rw-r--r-- 1 root root 312 2008-04-06 03:10 ./source/e/emacs/doinst.sh.gz +-rw-r--r-- 1 root root 29214952 2010-05-08 03:56 ./source/e/emacs/emacs-23.2.tar.xz +-rwxr-xr-x 1 root root 4899 2010-05-08 20:44 ./source/e/emacs/emacs.SlackBuild +-rw-r--r-- 1 root root 267 2008-04-06 03:18 ./source/e/emacs/emacs.info +-rw-r--r-- 1 root root 549 2008-04-06 03:11 ./source/e/emacs/slack-desc +drwxr-xr-x 2 root root 4096 2009-03-16 21:18 ./source/f +-rw-r--r-- 1 root root 963 2002-02-25 21:44 ./source/f/slack-desc.linux-faqs +-rw-r--r-- 1 root root 804 2002-02-25 21:55 ./source/f/slack-desc.linux-howtos +drwxr-xr-x 4 root root 4096 2010-01-20 21:17 ./source/installer +-rw-r--r-- 1 root root 1987727 2009-12-12 21:25 ./source/installer/busybox-1.15.3.tar.bz2 +-rw-r--r-- 1 root root 23985 2009-12-31 02:02 ./source/installer/busybox-dot-config +-rw-r--r-- 1 root root 275 2009-12-31 20:04 ./source/installer/busybox.2.6.32.2.diff.gz +-rwxr-xr-x 1 root root 2051 2009-12-31 20:06 ./source/installer/busybox.SlackBuild +drwxr-xr-x 2 root root 4096 2010-01-20 15:49 ./source/installer/dhcpcd +-rw-r--r-- 1 root root 311 2009-03-06 20:55 ./source/installer/dhcpcd/config.h.diff.gz +-rw-r--r-- 1 root root 45030 2008-08-26 03:12 ./source/installer/dhcpcd/dhcpcd-3.2.3.tar.bz2 +-rw-r--r-- 1 root root 391 2009-03-07 01:24 ./source/installer/dhcpcd/dhcpcd.sh.diff.gz +drwxr-xr-x 2 root root 4096 2008-03-13 13:43 ./source/installer/dropbear +-rw-r--r-- 1 root root 372 2008-03-13 13:43 ./source/installer/dropbear/doinst.sh +-rw-r--r-- 1 root root 1589729 2008-03-13 13:43 ./source/installer/dropbear/dropbear-0.50.tar.bz2 +-rwxr-xr-- 1 root root 4332 2008-03-13 13:43 ./source/installer/dropbear/dropbear.Slackbuild +-rw-r--r-- 1 root root 414 2008-03-13 13:43 ./source/installer/dropbear/dropbear.xauth.patch +-rw-r--r-- 1 root root 582 2008-03-13 13:43 ./source/installer/dropbear/dropbear_dbclientpath.patch +-rw-r--r-- 1 root root 1887 2008-03-13 13:43 ./source/installer/dropbear/dropbear_emptypass.patch +-rw-r--r-- 1 root root 1795 2008-03-13 13:43 ./source/installer/dropbear/rc.dropbear.new +-rw-r--r-- 1 root root 890 2008-03-13 13:43 ./source/installer/dropbear/slack-desc +drwxr-xr-x 6 root root 4096 2010-05-13 07:22 ./source/k +-rw-r--r-- 1 root root 1208 2010-05-13 07:23 ./source/k/README.TXT +-rw-r--r-- 1 root root 2712 2010-05-13 07:23 ./source/k/README_SPEAKUP_PATCH.TXT +-rw-r--r-- 1 root root 103655 2010-05-13 03:00 ./source/k/config-generic-2.6.33.4 +-rw-r--r-- 1 root root 103629 2010-05-13 04:07 ./source/k/config-huge-2.6.33.4 +-rw-r--r-- 1 root root 104113 2010-05-13 04:16 ./source/k/config-speakup-2.6.33.4 +drwxr-xr-x 2 root root 4096 2010-05-13 03:31 ./source/k/kernel-firmware +-rwxr-xr-x 1 root root 1679 2010-05-13 03:31 ./source/k/kernel-firmware/kernel-firmware.SlackBuild +-rw-r--r-- 1 root root 344 2008-10-16 03:59 ./source/k/kernel-firmware/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-13 03:31 ./source/k/kernel-generic +-rwxr-xr-x 1 root root 2909 2010-05-13 03:31 ./source/k/kernel-generic/kernel-generic.SlackBuild +-rw-r--r-- 1 root root 1091 2009-06-18 17:37 ./source/k/kernel-generic/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-13 04:13 ./source/k/kernel-huge +-rwxr-xr-x 1 root root 2906 2010-05-13 04:13 ./source/k/kernel-huge/kernel-huge.SlackBuild +-rw-r--r-- 1 root root 1100 2009-06-18 17:36 ./source/k/kernel-huge/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-13 03:31 ./source/k/kernel-modules +-rwxr-xr-x 1 root root 2872 2010-05-13 03:31 ./source/k/kernel-modules/kernel-modules.SlackBuild +-rwxr-xr-x 1 root root 35406 2009-06-04 22:36 ./source/k/kernel-modules/rc.modules.new +-rw-r--r-- 1 root root 985 2009-06-18 17:37 ./source/k/kernel-modules/slack-desc +-rw-r--r-- 1 root root 248 2010-05-12 22:09 ./source/k/linux-2.6.33.4.tar.sign +-rw-r--r-- 1 root root 54296520 2010-05-12 22:09 ./source/k/linux-2.6.33.4.tar.xz +-rw-r--r-- 1 root root 107428 2009-12-31 01:15 ./source/k/speakup-2009-12-30.tar.xz +drwxr-xr-x 38 root root 4096 2010-05-06 07:09 ./source/kde +-rwxr-xr-x 1 root root 1853 2010-03-25 10:56 ./source/kde/KDE.SlackBuild +-rw-r--r-- 1 root root 1598 2010-04-30 09:08 ./source/kde/KDE.options +-rwxr-xr-x 1 root root 1345 2010-05-04 21:56 ./source/kde/KDE_extra.SlackBuild +drwxr-xr-x 2 root root 4096 2009-11-03 22:46 ./source/kde/amarok +-rwxr-xr-x 1 root root 3561 2009-11-03 22:46 ./source/kde/amarok/amarok.SlackBuild +-rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/amarok/doinst.sh.gz +-rw-r--r-- 1 root root 14 2010-05-04 07:08 ./source/kde/amarok/local.options +-rw-r--r-- 1 root root 779 2008-05-26 06:10 ./source/kde/amarok/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/guidance-power-manager +-rwxr-xr-x 1 root root 2768 2010-04-30 11:00 ./source/kde/guidance-power-manager/guidance-power-manager.SlackBuild +-rw-r--r-- 1 root root 14 2010-04-30 11:00 ./source/kde/guidance-power-manager/local.options +-rw-r--r-- 1 root root 945 2010-05-04 01:42 ./source/kde/guidance-power-manager/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/k3b +-rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/k3b/doinst.sh.gz +-rwxr-xr-x 1 root root 2876 2010-04-18 16:08 ./source/kde/k3b/k3b.SlackBuild +-rw-r--r-- 1 root root 23 2010-04-30 10:59 ./source/kde/k3b/local.options +-rw-r--r-- 1 root root 836 2004-06-15 19:08 ./source/kde/k3b/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kaudiocreator +-rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/kaudiocreator/doinst.sh.gz +-rwxr-xr-x 1 root root 2704 2010-04-30 11:01 ./source/kde/kaudiocreator/kaudiocreator.SlackBuild +-rw-r--r-- 1 root root 25 2010-04-30 11:01 ./source/kde/kaudiocreator/local.options +-rw-r--r-- 1 root root 752 2009-12-16 21:08 ./source/kde/kaudiocreator/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdeaccessibility +-rw-r--r-- 1 root root 118 2007-12-21 07:15 ./source/kde/kdeaccessibility/doinst.sh.gz +-rwxr-xr-x 1 root root 2935 2009-09-26 04:26 ./source/kde/kdeaccessibility/kdeaccessibility.SlackBuild +-rw-r--r-- 1 root root 881 2010-05-04 00:25 ./source/kde/kdeaccessibility/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 01:55 ./source/kde/kdeadmin +-rw-r--r-- 1 root root 118 2007-12-21 07:36 ./source/kde/kdeadmin/doinst.sh.gz +-rwxr-xr-x 1 root root 3028 2009-09-26 03:59 ./source/kde/kdeadmin/kdeadmin.SlackBuild +-rw-r--r-- 1 root root 1235 2010-05-04 01:55 ./source/kde/kdeadmin/knetworkconf.diff.gz +-rw-r--r-- 1 root root 639 2010-05-04 00:25 ./source/kde/kdeadmin/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdeartwork +-rw-r--r-- 1 root root 118 2007-12-21 07:45 ./source/kde/kdeartwork/doinst.sh.gz +-rwxr-xr-x 1 root root 2938 2009-09-26 04:07 ./source/kde/kdeartwork/kdeartwork.SlackBuild +-rw-r--r-- 1 root root 689 2010-05-04 00:25 ./source/kde/kdeartwork/slack-desc +drwxr-xr-x 4 root root 4096 2010-05-04 00:31 ./source/kde/kdebase +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdebase-runtime +-rw-r--r-- 1 root root 118 2007-12-21 04:58 ./source/kde/kdebase-runtime/doinst.sh.gz +-rwxr-xr-x 1 root root 3078 2010-03-01 23:05 ./source/kde/kdebase-runtime/kdebase-runtime.SlackBuild +-rw-r--r-- 1 root root 757 2010-05-04 00:26 ./source/kde/kdebase-runtime/slack-desc +drwxr-xr-x 4 root root 4096 2010-05-04 04:59 ./source/kde/kdebase-workspace +drwxr-xr-x 2 root root 4096 2009-08-31 03:24 ./source/kde/kdebase-workspace/config +-rw-r--r-- 1 root root 2551 2007-12-21 05:56 ./source/kde/kdebase-workspace/config/Xsession +-rw-r--r-- 1 root root 1844 2007-12-21 05:53 ./source/kde/kdebase-workspace/config/Xsession.orig +-rw-r--r-- 1 root root 361 2007-12-21 06:10 ./source/kde/kdebase-workspace/doinst.sh.gz +-rw-r--r-- 1 root root 1551 2010-01-06 20:13 ./source/kde/kdebase-workspace/kcmshell_root_privilege.patch +-rwxr-xr-x 1 root root 4429 2010-05-04 01:49 ./source/kde/kdebase-workspace/kdebase-workspace.SlackBuild +-rw-r--r-- 1 root root 239 2010-05-04 03:12 ./source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff.gz +-rw-r--r-- 1 root root 438 2010-05-04 00:26 ./source/kde/kdebase-workspace/slack-desc +drwxr-xr-x 2 root root 4096 2009-08-31 03:24 ./source/kde/kdebase-workspace/xinit +-rwxr-xr-x 1 root root 534 2010-03-31 17:34 ./source/kde/kdebase-workspace/xinit/xinitrc.kde +drwxr-xr-x 2 root root 4096 2009-08-31 03:24 ./source/kde/kdebase/config +-rw-r--r-- 1 root root 69 2006-08-23 21:34 ./source/kde/kdebase/config/kdeglobals +-rw-r--r-- 1 root root 124 2009-01-21 23:18 ./source/kde/kdebase/doinst.sh.gz +-rwxr-xr-x 1 root root 3819 2010-02-05 13:25 ./source/kde/kdebase/kdebase.SlackBuild +-rw-r--r-- 1 root root 487 2010-01-07 20:39 ./source/kde/kdebase/module_manager_include.diff +drwxr-xr-x 2 root root 4096 2009-08-31 03:24 ./source/kde/kdebase/profile.d +-rwxr-xr-x 1 root root 274 2008-07-11 02:34 ./source/kde/kdebase/profile.d/kde.csh +-rwxr-xr-x 1 root root 261 2008-07-11 02:33 ./source/kde/kdebase/profile.d/kde.sh +-rw-r--r-- 1 root root 696 2010-05-04 00:26 ./source/kde/kdebase/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-14 18:45 ./source/kde/kdebindings +-rw-r--r-- 1 root root 1819 2009-12-16 01:49 ./source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff.gz +-rw-r--r-- 1 root root 1812 2009-12-16 01:49 ./source/kde/kdebindings/kdebindings-ruby-env.h.diff.gz +-rw-r--r-- 1 root root 307 2009-12-16 01:49 ./source/kde/kdebindings/kdebindings-rubyconfig.h.diff.gz +-rwxr-xr-x 1 root root 3508 2010-05-14 18:45 ./source/kde/kdebindings/kdebindings.SlackBuild +-rw-r--r-- 1 root root 8 2010-05-14 18:45 ./source/kde/kdebindings/local.options +-rw-r--r-- 1 root root 975 2010-05-04 00:27 ./source/kde/kdebindings/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdeedu +-rw-r--r-- 1 root root 118 2007-12-21 12:20 ./source/kde/kdeedu/doinst.sh.gz +-rwxr-xr-x 1 root root 2880 2009-09-26 05:20 ./source/kde/kdeedu/kdeedu.SlackBuild +-rw-r--r-- 1 root root 638 2010-05-04 00:27 ./source/kde/kdeedu/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdegames +-rw-r--r-- 1 root root 118 2007-12-21 12:16 ./source/kde/kdegames/doinst.sh.gz +-rwxr-xr-x 1 root root 2894 2009-09-26 05:20 ./source/kde/kdegames/kdegames.SlackBuild +-rw-r--r-- 1 root root 646 2010-05-04 00:27 ./source/kde/kdegames/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-18 02:08 ./source/kde/kdegraphics +-rw-r--r-- 1 root root 118 2007-12-21 13:11 ./source/kde/kdegraphics/doinst.sh.gz +-rwxr-xr-x 1 root root 3012 2010-05-18 02:10 ./source/kde/kdegraphics/kdegraphics.SlackBuild +-rw-r--r-- 1 root root 309 2010-05-18 02:08 ./source/kde/kdegraphics/kdegraphics.gwenview.jpeg8.diff.gz +-rw-r--r-- 1 root root 8 2010-05-18 02:09 ./source/kde/kdegraphics/local.options +-rw-r--r-- 1 root root 807 2009-12-16 21:14 ./source/kde/kdegraphics/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdelibs +-rw-r--r-- 1 root root 142 2007-12-20 04:10 ./source/kde/kdelibs/doinst.sh.gz +-rwxr-xr-x 1 root root 3071 2010-03-30 20:35 ./source/kde/kdelibs/kdelibs.SlackBuild +-rw-r--r-- 1 root root 766 2009-10-19 03:46 ./source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch.gz +-rw-r--r-- 1 root root 649 2009-12-16 21:15 ./source/kde/kdelibs/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdemultimedia +-rw-r--r-- 1 root root 118 2007-12-21 07:19 ./source/kde/kdemultimedia/doinst.sh.gz +-rwxr-xr-x 1 root root 2937 2009-09-26 05:21 ./source/kde/kdemultimedia/kdemultimedia.SlackBuild +-rw-r--r-- 1 root root 977 2010-05-04 00:27 ./source/kde/kdemultimedia/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-14 02:56 ./source/kde/kdenetwork +-rw-r--r-- 1 root root 118 2007-12-21 07:33 ./source/kde/kdenetwork/doinst.sh.gz +-rwxr-xr-x 1 root root 3045 2010-05-14 02:57 ./source/kde/kdenetwork/kdenetwork.SlackBuild +-rw-r--r-- 1 root root 2329 2010-05-14 02:51 ./source/kde/kdenetwork/kget.kde44.CVE-2010-1000-1511.diff.gz +-rw-r--r-- 1 root root 8 2010-05-14 02:52 ./source/kde/kdenetwork/local.options +-rw-r--r-- 1 root root 692 2010-05-04 00:27 ./source/kde/kdenetwork/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 19:59 ./source/kde/kdepim +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdepim-runtime +-rw-r--r-- 1 root root 118 2009-08-31 03:24 ./source/kde/kdepim-runtime/doinst.sh.gz +-rwxr-xr-x 1 root root 2914 2009-09-26 05:21 ./source/kde/kdepim-runtime/kdepim-runtime.SlackBuild +-rw-r--r-- 1 root root 972 2010-05-04 00:28 ./source/kde/kdepim-runtime/slack-desc +-rw-r--r-- 1 root root 118 2007-12-21 13:41 ./source/kde/kdepim/doinst.sh.gz +-rw-r--r-- 1 root root 3880 2010-05-04 18:04 ./source/kde/kdepim/kdepim-4.4.0-install-headers.patch +-rwxr-xr-x 1 root root 3048 2010-05-04 20:00 ./source/kde/kdepim/kdepim.SlackBuild +-rw-r--r-- 1 root root 873 2010-05-04 00:28 ./source/kde/kdepim/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 05:23 ./source/kde/kdepimlibs +-rwxr-xr-x 1 root root 2897 2009-09-26 04:07 ./source/kde/kdepimlibs/kdepimlibs.SlackBuild +-rw-r--r-- 1 root root 735 2010-05-04 00:28 ./source/kde/kdepimlibs/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdeplasma-addons +-rw-r--r-- 1 root root 118 2007-12-21 12:17 ./source/kde/kdeplasma-addons/doinst.sh.gz +-rwxr-xr-x 1 root root 2935 2009-09-26 05:21 ./source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild +-rw-r--r-- 1 root root 763 2009-12-16 21:16 ./source/kde/kdeplasma-addons/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdesdk +-rw-r--r-- 1 root root 118 2007-12-21 13:10 ./source/kde/kdesdk/doinst.sh.gz +-rwxr-xr-x 1 root root 2872 2009-09-26 05:21 ./source/kde/kdesdk/kdesdk.SlackBuild +-rw-r--r-- 1 root root 778 2010-05-04 00:28 ./source/kde/kdesdk/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdetoys +-rw-r--r-- 1 root root 118 2007-12-21 12:17 ./source/kde/kdetoys/doinst.sh.gz +-rwxr-xr-x 1 root root 2887 2009-09-26 05:21 ./source/kde/kdetoys/kdetoys.SlackBuild +-rw-r--r-- 1 root root 715 2010-05-04 00:29 ./source/kde/kdetoys/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdeutils +-rw-r--r-- 1 root root 118 2007-12-21 07:16 ./source/kde/kdeutils/doinst.sh.gz +-rwxr-xr-x 1 root root 2903 2009-11-03 22:44 ./source/kde/kdeutils/kdeutils.SlackBuild +-rw-r--r-- 1 root root 786 2010-05-04 00:29 ./source/kde/kdeutils/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdevelop +-rw-r--r-- 1 root root 118 2007-12-24 16:27 ./source/kde/kdevelop/doinst.sh.gz +-rwxr-xr-x 1 root root 2905 2010-04-30 11:02 ./source/kde/kdevelop/kdevelop.SlackBuild +-rw-r--r-- 1 root root 14 2010-04-30 11:02 ./source/kde/kdevelop/local.options +-rw-r--r-- 1 root root 679 2009-12-16 21:21 ./source/kde/kdevelop/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kdevplatform +-rw-r--r-- 1 root root 118 2007-12-24 16:27 ./source/kde/kdevplatform/doinst.sh.gz +-rwxr-xr-x 1 root root 2915 2010-04-30 11:03 ./source/kde/kdevplatform/kdevplatform.SlackBuild +-rw-r--r-- 1 root root 14 2010-04-30 11:02 ./source/kde/kdevplatform/local.options +-rw-r--r-- 1 root root 710 2009-01-13 15:04 ./source/kde/kdevplatform/slack-desc +drwxr-xr-x 3 root root 4096 2010-05-04 00:31 ./source/kde/kdewebdev +-rw-r--r-- 1 root root 118 2007-12-21 15:17 ./source/kde/kdewebdev/doinst.sh.gz +-rw-r--r-- 1 root root 260 2009-09-03 15:03 ./source/kde/kdewebdev/include-tidy.patch.gz +-rw-r--r-- 1 root root 391 2008-12-29 21:48 ./source/kde/kdewebdev/kde4-kdewebdev-findtidy.diff.gz +-rwxr-xr-x 1 root root 3391 2009-09-26 05:21 ./source/kde/kdewebdev/kdewebdev.SlackBuild +-rw-r--r-- 1 root root 716 2010-05-04 00:31 ./source/kde/kdewebdev/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 04:10 ./source/kde/kdewebdev/tidy +-rwxr-xr-x 1 root root 1682 2009-05-07 03:57 ./source/kde/kdewebdev/tidy/get-tidy-cvs.sh +-rw-r--r-- 1 root root 338924 2010-05-04 04:09 ./source/kde/kdewebdev/tidy/tidy-20100503T2309.tar.xz +-rwxr-xr-x 1 root root 3271 2010-05-04 04:09 ./source/kde/kdewebdev/tidy/tidy.SlackBuild +-rwxr-xr-x 1 root root 2907 2010-05-04 04:10 ./source/kde/kdewebdev/tidy/tidy.build +drwxr-xr-x 2 root root 4096 2010-02-25 18:03 ./source/kde/koffice +-rw-r--r-- 1 root root 118 2007-12-24 16:27 ./source/kde/koffice/doinst.sh.gz +-rwxr-xr-x 1 root root 2960 2010-02-25 18:09 ./source/kde/koffice/koffice.SlackBuild +-rw-r--r-- 1 root root 267 2010-02-25 18:03 ./source/kde/koffice/koffice.krita.png14.diff.gz +-rw-r--r-- 1 root root 22 2010-05-08 19:52 ./source/kde/koffice/local.options +-rw-r--r-- 1 root root 951 2007-12-24 16:26 ./source/kde/koffice/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/konq-plugins +-rwxr-xr-x 1 root root 2900 2009-09-26 05:22 ./source/kde/konq-plugins/konq-plugins.SlackBuild +-rw-r--r-- 1 root root 14 2010-04-30 11:03 ./source/kde/konq-plugins/local.options +-rw-r--r-- 1 root root 982 2008-11-24 21:25 ./source/kde/konq-plugins/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/kopete-cryptography +-rw-r--r-- 1 root root 118 2009-08-31 03:24 ./source/kde/kopete-cryptography/doinst.sh.gz +-rwxr-xr-x 1 root root 2900 2010-04-30 11:04 ./source/kde/kopete-cryptography/kopete-cryptography.SlackBuild +-rw-r--r-- 1 root root 23 2010-04-30 11:03 ./source/kde/kopete-cryptography/local.options +-rw-r--r-- 1 root root 810 2009-10-21 00:07 ./source/kde/kopete-cryptography/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/ktorrent +-rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/ktorrent/doinst.sh.gz +-rwxr-xr-x 1 root root 2898 2009-12-16 22:30 ./source/kde/ktorrent/ktorrent.SlackBuild +-rw-r--r-- 1 root root 14 2010-04-30 11:04 ./source/kde/ktorrent/local.options +-rw-r--r-- 1 root root 1041 2009-12-16 21:20 ./source/kde/ktorrent/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/oxygen-icons +-rwxr-xr-x 1 root root 2796 2009-10-21 03:14 ./source/kde/oxygen-icons/oxygen-icons.SlackBuild +-rw-r--r-- 1 root root 792 2010-05-04 00:29 ./source/kde/oxygen-icons/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-24 11:41 ./source/kde/polkit-kde-1 +-rw-r--r-- 1 root root 33 2010-04-30 09:40 ./source/kde/polkit-kde-1/local.options +-rwxr-xr-x 1 root root 2899 2010-03-27 13:21 ./source/kde/polkit-kde-1/polkit-kde-1.SlackBuild +-rw-r--r-- 1 root root 686 2010-05-05 23:45 ./source/kde/polkit-kde-1/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-24 11:41 ./source/kde/polkit-qt-1 +-rw-r--r-- 1 root root 33 2010-04-30 09:41 ./source/kde/polkit-qt-1/local.options +-rwxr-xr-x 1 root root 2855 2010-03-27 13:21 ./source/kde/polkit-qt-1/polkit-qt-1.SlackBuild +-rw-r--r-- 1 root root 903 2010-05-05 23:45 ./source/kde/polkit-qt-1/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/kde/skanlite +-rw-r--r-- 1 root root 118 2008-05-17 02:40 ./source/kde/skanlite/doinst.sh.gz +-rw-r--r-- 1 root root 21 2010-04-30 11:05 ./source/kde/skanlite/local.options +-rwxr-xr-x 1 root root 2818 2010-04-30 11:05 ./source/kde/skanlite/skanlite.SlackBuild +-rw-r--r-- 1 root root 666 2009-01-14 00:18 ./source/kde/skanlite/slack-desc +drwxr-xr-x 3 root root 4096 2010-05-05 18:15 ./source/kde/src +drwxr-xr-x 2 root root 4096 2010-05-04 06:55 ./source/kde/src/extragear +-rw-r--r-- 1 root root 9748862 2010-04-15 22:07 ./source/kde/src/extragear/amarok-2.3.0.90.tar.bz2 +-rw-r--r-- 1 root root 7954852 2010-03-10 23:27 ./source/kde/src/extragear/amarok-2.3.0.tar.xz +-rw-r--r-- 1 root root 77748 2010-04-30 10:54 ./source/kde/src/extragear/guidance-power-manager-4.4.0.tar.xz +-rw-r--r-- 1 root root 9571500 2010-04-01 18:57 ./source/kde/src/extragear/k3b-1.91.0.tar.xz +-rw-r--r-- 1 root root 61616 2010-04-30 10:51 ./source/kde/src/extragear/kaudiocreator-r1118889.tar.xz +-rw-r--r-- 1 root root 995644 2010-02-12 07:11 ./source/kde/src/extragear/konq-plugins-4.4.0.tar.xz +-rw-r--r-- 1 root root 73404 2010-02-12 07:11 ./source/kde/src/extragear/kopete-cryptography-1.3.0-kde4.4.0.tar.xz +-rw-r--r-- 1 root root 2044036 2010-02-07 11:06 ./source/kde/src/extragear/ktorrent-3.3.4.tar.xz +-rw-r--r-- 1 root root 1165884 2010-02-12 07:12 ./source/kde/src/extragear/skanlite-0.4-kde4.4.0.tar.xz +-rw-r--r-- 1 root root 4316344 2010-04-30 07:32 ./source/kde/src/kdeaccessibility-4.4.3.tar.xz +-rw-r--r-- 1 root root 1201792 2010-04-30 07:32 ./source/kde/src/kdeadmin-4.4.3.tar.xz +-rw-r--r-- 1 root root 69121444 2010-04-30 07:33 ./source/kde/src/kdeartwork-4.4.3.tar.xz +-rw-r--r-- 1 root root 3721428 2010-04-30 07:32 ./source/kde/src/kdebase-4.4.3.tar.xz +-rw-r--r-- 1 root root 6930584 2010-04-30 07:32 ./source/kde/src/kdebase-runtime-4.4.3.tar.xz +-rw-r--r-- 1 root root 70296068 2010-04-30 07:31 ./source/kde/src/kdebase-workspace-4.4.3.tar.xz +-rw-r--r-- 1 root root 4223380 2010-04-30 07:31 ./source/kde/src/kdebindings-4.4.3.tar.xz +-rw-r--r-- 1 root root 52930596 2010-04-30 07:32 ./source/kde/src/kdeedu-4.4.3.tar.xz +-rw-r--r-- 1 root root 63724736 2010-04-30 07:33 ./source/kde/src/kdegames-4.4.3.tar.xz +-rw-r--r-- 1 root root 3516376 2010-04-30 07:31 ./source/kde/src/kdegraphics-4.4.3.tar.xz +-rw-r--r-- 1 root root 12280080 2010-05-05 08:49 ./source/kde/src/kdelibs-4.4.3.tar.xz +-rw-r--r-- 1 root root 1299148 2010-04-30 07:31 ./source/kde/src/kdemultimedia-4.4.3.tar.xz +-rw-r--r-- 1 root root 7341752 2010-04-30 07:31 ./source/kde/src/kdenetwork-4.4.3.tar.xz +-rw-r--r-- 1 root root 8352620 2010-04-30 07:31 ./source/kde/src/kdepim-4.4.3.tar.xz +-rw-r--r-- 1 root root 531976 2010-04-30 07:32 ./source/kde/src/kdepim-runtime-4.4.3.tar.xz +-rw-r--r-- 1 root root 2098380 2010-04-30 07:31 ./source/kde/src/kdepimlibs-4.4.3.tar.xz +-rw-r--r-- 1 root root 1389004 2010-04-30 07:31 ./source/kde/src/kdeplasma-addons-4.4.3.tar.xz +-rw-r--r-- 1 root root 4910476 2010-04-30 07:32 ./source/kde/src/kdesdk-4.4.3.tar.xz +-rw-r--r-- 1 root root 1173468 2010-04-30 07:32 ./source/kde/src/kdetoys-4.4.3.tar.xz +-rw-r--r-- 1 root root 2465848 2010-04-30 07:36 ./source/kde/src/kdeutils-4.4.3.tar.xz +-rw-r--r-- 1 root root 3458308 2010-04-28 19:38 ./source/kde/src/kdevelop-4.0.0.tar.xz +-rw-r--r-- 1 root root 1261636 2010-04-28 19:38 ./source/kde/src/kdevplatform-1.0.0.tar.xz +-rw-r--r-- 1 root root 2042408 2010-04-30 07:37 ./source/kde/src/kdewebdev-4.4.3.tar.xz +-rw-r--r-- 1 root root 45992480 2010-03-29 18:35 ./source/kde/src/koffice-2.1.2.tar.xz +-rw-r--r-- 1 root root 101250200 2010-04-30 07:32 ./source/kde/src/oxygen-icons-4.4.3.tar.xz +-rw-r--r-- 1 root root 39196 2010-04-30 09:40 ./source/kde/src/polkit-kde-1-r1120537.tar.xz +-rw-r--r-- 1 root root 61844 2010-04-30 09:34 ./source/kde/src/polkit-qt-1-r1118744.tar.xz +drwxr-xr-x 4 root root 4096 2010-05-06 07:11 ./source/kdei +drwxr-xr-x 4 root root 4096 2010-05-06 07:11 ./source/kdei/kde-l10n +-rw-r--r-- 1 root root 3440264 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-ar-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2112092 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-bg-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 4914654 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-ca-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2385801 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-ca@valencia-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 3092753 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-cs-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 532953 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-csb-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 17862353 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-da-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 20981969 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-de-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2619734 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-el-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 4081631 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-en_GB-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2070108 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-eo-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 28802942 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-es-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 9250730 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-et-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2166493 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-eu-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2515513 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-fi-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 21936743 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-fr-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 1265952 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-fy-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 3365889 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-ga-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 3977029 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-gl-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 777392 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-gu-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2288930 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-he-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 1903354 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-hi-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2136475 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-hr-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 4674995 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-hu-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 352550 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-id-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2007850 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-is-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 11326666 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-it-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2301189 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-ja-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 1682156 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-kk-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2251163 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-km-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 422819 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-kn-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 1658795 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-ko-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2139994 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-lt-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2199679 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-lv-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 923330 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-mai-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 1925598 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-mk-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 20301017 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-ml-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2619697 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-nb-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 3877757 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-nds-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 13976048 2010-04-30 17:45 ./source/kdei/kde-l10n/kde-l10n-nl-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2201234 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-nn-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 1817894 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-pa-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 6148292 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-pl-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 6344021 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-pt-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 17653673 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-pt_BR-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 3498475 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-ro-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 6426237 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-ru-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 763924 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-si-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 4401374 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-sk-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 4500262 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-sl-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 4160415 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-sr-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 18796527 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-sv-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2083603 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-tg-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2534675 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-tr-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 13953579 2010-04-30 07:35 ./source/kdei/kde-l10n/kde-l10n-uk-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 1822152 2010-04-30 07:36 ./source/kdei/kde-l10n/kde-l10n-wa-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 3608445 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-zh_CN-4.4.3.tar.bz2 +-rw-r--r-- 1 root root 2658669 2010-04-30 07:34 ./source/kdei/kde-l10n/kde-l10n-zh_TW-4.4.3.tar.bz2 +-rwxr-xr-x 1 root root 4087 2010-04-30 09:11 ./source/kdei/kde-l10n/kde-l10n.SlackBuild +-rw-r--r-- 1 root root 198 2010-05-04 22:29 ./source/kdei/kde-l10n/languages +drwxr-xr-x 2 root root 4096 2008-05-26 07:17 ./source/kdei/kde-l10n/local.options +drwxr-xr-x 2 root root 4096 2010-02-05 09:17 ./source/kdei/kde-l10n/slack-desc +-rw-r--r-- 1 root root 188 2009-01-21 22:32 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ar +-rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bg +-rw-r--r-- 1 root root 225 2009-03-06 20:29 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bn_IN +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca +-rw-r--r-- 1 root root 300 2010-01-21 09:24 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia +-rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-cs +-rw-r--r-- 1 root root 203 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-csb +-rw-r--r-- 1 root root 188 2008-07-26 01:24 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-da +-rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-de +-rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-el +-rw-r--r-- 1 root root 230 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-en_GB +-rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eo +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-es +-rw-r--r-- 1 root root 190 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-et +-rw-r--r-- 1 root root 188 2009-03-06 22:05 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eu +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fi +-rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fr +-rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fy +-rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ga +-rw-r--r-- 1 root root 190 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gl +-rw-r--r-- 1 root root 190 2009-01-21 22:33 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gu +-rw-r--r-- 1 root root 188 2009-01-21 22:34 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-he +-rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hi +-rw-r--r-- 1 root root 207 2009-10-21 03:40 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hne +-rw-r--r-- 1 root root 190 2009-10-21 03:42 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hr +-rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hu +-rw-r--r-- 1 root root 192 2010-02-05 09:17 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-id +-rw-r--r-- 1 root root 191 2009-03-06 22:06 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-is +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-it +-rw-r--r-- 1 root root 190 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ja +-rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kk +-rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-km +-rw-r--r-- 1 root root 189 2009-03-06 20:30 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kn +-rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ko +-rw-r--r-- 1 root root 189 2008-07-26 01:59 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ku +-rw-r--r-- 1 root root 192 2008-07-26 01:58 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lt +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lv +-rw-r--r-- 1 root root 202 2009-01-27 05:28 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mai +-rw-r--r-- 1 root root 192 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mk +-rw-r--r-- 1 root root 191 2008-07-26 01:59 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ml +-rw-r--r-- 1 root root 189 2009-03-06 20:31 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mr +-rw-r--r-- 1 root root 201 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nb +-rw-r--r-- 1 root root 203 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nds +-rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nl +-rw-r--r-- 1 root root 201 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nn +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pa +-rw-r--r-- 1 root root 188 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pl +-rw-r--r-- 1 root root 192 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt +-rw-r--r-- 1 root root 238 2008-05-26 07:01 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt_BR +-rw-r--r-- 1 root root 190 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ro +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ru +-rw-r--r-- 1 root root 189 2010-01-21 09:25 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-si +-rw-r--r-- 1 root root 188 2009-04-03 21:25 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sk +-rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sl +-rw-r--r-- 1 root root 189 2008-07-26 01:58 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sr +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sv +-rw-r--r-- 1 root root 187 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ta +-rw-r--r-- 1 root root 187 2009-03-06 22:07 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tg +-rw-r--r-- 1 root root 186 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-th +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tr +-rw-r--r-- 1 root root 191 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-uk +-rw-r--r-- 1 root root 189 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-wa +-rw-r--r-- 1 root root 236 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_CN +-rw-r--r-- 1 root root 225 2008-05-26 06:46 ./source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_TW +drwxr-xr-x 3 root root 4096 2010-04-10 18:21 ./source/kdei/koffice +-rw-r--r-- 1 root root 471033 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-ca-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 256495 2010-03-29 15:08 ./source/kdei/koffice/koffice-l10n-ca@valencia-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 492687 2010-03-29 15:09 ./source/kdei/koffice/koffice-l10n-da-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 1391175 2010-03-29 15:07 ./source/kdei/koffice/koffice-l10n-de-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 280045 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-el-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 295841 2010-03-29 15:07 ./source/kdei/koffice/koffice-l10n-en_GB-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 6155059 2010-03-29 15:08 ./source/kdei/koffice/koffice-l10n-es-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 594202 2010-03-29 15:06 ./source/kdei/koffice/koffice-l10n-et-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 1273336 2010-03-29 18:42 ./source/kdei/koffice/koffice-l10n-fr-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 281462 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-fy-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 310038 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-gl-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 232798 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-hne-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 579184 2010-03-29 15:07 ./source/kdei/koffice/koffice-l10n-it-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 240406 2010-03-29 15:07 ./source/kdei/koffice/koffice-l10n-ja-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 267748 2010-03-29 15:06 ./source/kdei/koffice/koffice-l10n-kk-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 252913 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-nb-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 889184 2010-03-29 15:07 ./source/kdei/koffice/koffice-l10n-nds-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 2653712 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-nl-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 283188 2010-03-29 15:07 ./source/kdei/koffice/koffice-l10n-pl-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 932135 2010-03-29 15:09 ./source/kdei/koffice/koffice-l10n-pt-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 736410 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-pt_BR-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 4174048 2010-03-29 15:07 ./source/kdei/koffice/koffice-l10n-sv-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 247044 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-tr-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 502342 2010-03-29 15:09 ./source/kdei/koffice/koffice-l10n-uk-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 254203 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-wa-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 228587 2010-03-29 15:07 ./source/kdei/koffice/koffice-l10n-zh_CN-2.1.2.tar.bz2 +-rw-r--r-- 1 root root 259043 2010-03-29 15:05 ./source/kdei/koffice/koffice-l10n-zh_TW-2.1.2.tar.bz2 +-rwxr-xr-x 1 root root 4023 2010-04-10 05:02 ./source/kdei/koffice/koffice-l10n.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-10 05:00 ./source/kdei/koffice/slack-desc +-rw-r--r-- 1 root root 709 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-af +-rw-r--r-- 1 root root 240 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ar +-rw-r--r-- 1 root root 711 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-az +-rw-r--r-- 1 root root 243 2007-06-11 08:45 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-bg +-rw-r--r-- 1 root root 706 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-br +-rw-r--r-- 1 root root 241 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-bs +-rw-r--r-- 1 root root 241 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ca +-rw-r--r-- 1 root root 370 2010-04-10 05:01 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ca@valencia +-rw-r--r-- 1 root root 705 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-cs +-rw-r--r-- 1 root root 239 2005-06-23 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-cy +-rw-r--r-- 1 root root 706 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-da +-rw-r--r-- 1 root root 706 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-de +-rw-r--r-- 1 root root 239 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-el +-rw-r--r-- 1 root root 751 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-en_GB +-rw-r--r-- 1 root root 709 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-eo +-rw-r--r-- 1 root root 707 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-es +-rw-r--r-- 1 root root 708 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-et +-rw-r--r-- 1 root root 706 2006-01-29 02:25 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-eu +-rw-r--r-- 1 root root 249 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-fa +-rw-r--r-- 1 root root 241 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-fi +-rw-r--r-- 1 root root 706 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-fr +-rw-r--r-- 1 root root 243 2008-11-24 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-fy +-rw-r--r-- 1 root root 712 2006-04-17 05:24 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ga +-rw-r--r-- 1 root root 708 2007-02-16 22:10 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-gl +-rw-r--r-- 1 root root 240 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-he +-rw-r--r-- 1 root root 239 2006-04-17 05:25 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hi +-rw-r--r-- 1 root root 259 2009-10-21 05:30 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hne +-rw-r--r-- 1 root root 259 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hsb +-rw-r--r-- 1 root root 709 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hu +-rw-r--r-- 1 root root 243 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-is +-rw-r--r-- 1 root root 707 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-it +-rw-r--r-- 1 root root 708 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ja +-rw-r--r-- 1 root root 240 2008-11-24 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-kk +-rw-r--r-- 1 root root 705 2007-04-22 20:28 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-km +-rw-r--r-- 1 root root 237 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-lo +-rw-r--r-- 1 root root 710 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-lt +-rw-r--r-- 1 root root 241 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-lv +-rw-r--r-- 1 root root 244 2007-02-16 22:11 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-mk +-rw-r--r-- 1 root root 705 2006-06-02 20:44 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ms +-rw-r--r-- 1 root root 707 2005-06-23 22:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-mt +-rw-r--r-- 1 root root 253 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-nb +-rw-r--r-- 1 root root 255 2007-06-11 08:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-nds +-rw-r--r-- 1 root root 240 2007-06-11 08:47 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ne +-rw-r--r-- 1 root root 705 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-nl +-rw-r--r-- 1 root root 253 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-nn +-rw-r--r-- 1 root root 719 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-no +-rw-r--r-- 1 root root 758 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-no_NY +-rw-r--r-- 1 root root 706 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-pl +-rw-r--r-- 1 root root 710 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-pt +-rw-r--r-- 1 root root 756 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-pt_BR +-rw-r--r-- 1 root root 708 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ro +-rw-r--r-- 1 root root 707 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ru +-rw-r--r-- 1 root root 713 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-se +-rw-r--r-- 1 root root 706 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sk +-rw-r--r-- 1 root root 709 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sl +-rw-r--r-- 1 root root 707 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sr +-rw-r--r-- 1 root root 788 2005-07-27 22:46 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sr@Latn +-rw-r--r-- 1 root root 707 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-sv +-rw-r--r-- 1 root root 705 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ta +-rw-r--r-- 1 root root 239 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-tg +-rw-r--r-- 1 root root 238 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-th +-rw-r--r-- 1 root root 707 2005-06-23 22:48 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-tr +-rw-r--r-- 1 root root 709 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-uk +-rw-r--r-- 1 root root 239 2006-04-17 05:27 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-uz +-rw-r--r-- 1 root root 251 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ven +-rw-r--r-- 1 root root 707 2009-06-03 08:13 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-wa +-rw-r--r-- 1 root root 239 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-xh +-rw-r--r-- 1 root root 288 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-zh_CN +-rw-r--r-- 1 root root 277 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-zh_TW +-rw-r--r-- 1 root root 238 2005-06-23 22:49 ./source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-zu +drwxr-xr-x 186 root root 4096 2010-05-14 03:55 ./source/l +drwxr-xr-x 3 root root 4096 2010-03-22 20:46 ./source/l/ConsoleKit +-rw-r--r-- 1 root root 95698 2010-03-22 20:45 ./source/l/ConsoleKit/ConsoleKit-0.4.1.tar.bz2 +-rw-r--r-- 1 root root 95335 2010-03-22 20:42 ./source/l/ConsoleKit/ConsoleKit-20100129.tar.bz2 +-rwxr-xr-x 1 root root 4687 2010-03-30 14:03 ./source/l/ConsoleKit/ConsoleKit.SlackBuild +-rw-r--r-- 1 root root 299 2009-05-30 01:28 ./source/l/ConsoleKit/doinst.sh.gz +-rw-r--r-- 1 root root 411 2009-07-07 17:18 ./source/l/ConsoleKit/pam-foreground-compat.ck +drwxr-xr-x 2 root root 4096 2009-11-05 14:55 ./source/l/ConsoleKit/patches +-rw-r--r-- 1 root root 854 2009-05-04 23:46 ./source/l/ConsoleKit/patches/consolekit-0.2.10-cleanup_console_tags.patch.gz +-rw-r--r-- 1 root root 739 2009-05-04 23:46 ./source/l/ConsoleKit/patches/consolekit-dbus-permissions.patch.gz +-rw-r--r-- 1 root root 413 2009-05-04 23:46 ./source/l/ConsoleKit/patches/consolekit-skipvalidation.patch.gz +-rw-r--r-- 1 root root 790 2010-05-04 00:17 ./source/l/ConsoleKit/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/M2Crypto +-rw-r--r-- 1 root root 309578 2009-02-23 00:48 ./source/l/M2Crypto/M2Crypto-0.19.1.tar.bz2 +-rwxr-xr-x 1 root root 2428 2009-05-19 20:05 ./source/l/M2Crypto/M2Crypto.SlackBuild +-rw-r--r-- 1 root root 1050 2009-03-31 01:47 ./source/l/M2Crypto/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/PyQt +-rw-r--r-- 1 root root 6617224 2010-04-21 09:57 ./source/l/PyQt/PyQt-x11-gpl-4.7.3.tar.xz +-rwxr-xr-x 1 root root 3163 2010-04-21 09:53 ./source/l/PyQt/PyQt.SlackBuild +-rw-r--r-- 1 root root 158 2009-11-28 04:35 ./source/l/PyQt/PyQt.info +-rw-r--r-- 1 root root 254 2010-03-25 19:48 ./source/l/PyQt/PyQt.phonon.diff.gz +-rw-r--r-- 1 root root 731 2010-05-04 00:18 ./source/l/PyQt/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/QScintilla +-rw-r--r-- 1 root root 1101236 2010-03-24 11:01 ./source/l/QScintilla/QScintilla-gpl-2.4.3.tar.xz +-rwxr-xr-x 1 root root 3056 2010-03-24 10:59 ./source/l/QScintilla/QScintilla.SlackBuild +-rw-r--r-- 1 root root 1127 2008-07-31 04:32 ./source/l/QScintilla/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/aalib +-rw-r--r-- 1 root root 391028 2001-04-26 15:56 ./source/l/aalib/aalib-1.4rc5.tar.gz +-rwxr-xr-x 1 root root 3396 2009-05-19 20:05 ./source/l/aalib/aalib.SlackBuild +-rw-r--r-- 1 root root 1451 2002-03-28 07:45 ./source/l/aalib/slack-desc +-rw-r--r-- 1 root root 1305 2002-03-28 07:43 ./source/l/aalib/slack-desc.11line +drwxr-xr-x 2 root root 4096 2010-02-09 13:15 ./source/l/akonadi +-rw-r--r-- 1 root root 168 2009-09-01 21:14 ./source/l/akonadi/README.html +-rw-r--r-- 1 root root 193500 2010-02-09 11:24 ./source/l/akonadi/akonadi-1.3.1.tar.bz2 +-rwxr-xr-x 1 root root 3125 2010-02-09 13:15 ./source/l/akonadi/akonadi.SlackBuild +-rw-r--r-- 1 root root 110 2009-08-31 03:24 ./source/l/akonadi/doinst.sh.gz +-rw-r--r-- 1 root root 840 2010-05-04 00:18 ./source/l/akonadi/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-20 02:41 ./source/l/alsa-lib +-rw-r--r-- 1 root root 808271 2010-04-16 11:22 ./source/l/alsa-lib/alsa-lib-1.0.23.tar.bz2 +-rwxr-xr-x 1 root root 3309 2010-02-07 19:07 ./source/l/alsa-lib/alsa-lib.SlackBuild +-rw-r--r-- 1 root root 861 2003-08-29 05:32 ./source/l/alsa-lib/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/alsa-oss +-rw-r--r-- 1 root root 248726 2008-07-14 09:20 ./source/l/alsa-oss/alsa-oss-1.0.17.tar.bz2 +-rwxr-xr-x 1 root root 2601 2009-05-19 20:05 ./source/l/alsa-oss/alsa-oss.SlackBuild +-rw-r--r-- 1 root root 962 2003-08-29 06:30 ./source/l/alsa-oss/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-05 21:05 ./source/l/apr +drwxr-xr-x 2 root root 4096 2009-08-06 20:38 ./source/l/apr-util +-rw-r--r-- 1 root root 589942 2009-08-04 21:09 ./source/l/apr-util/apr-util-1.3.9.tar.bz2 +-rw-r--r-- 1 root root 835 2009-08-04 21:09 ./source/l/apr-util/apr-util-1.3.9.tar.bz2.asc +-rwxr-xr-x 1 root root 3868 2010-03-05 21:20 ./source/l/apr-util/apr-util.SlackBuild +-rw-r--r-- 1 root root 942 2006-07-29 21:51 ./source/l/apr-util/slack-desc +-rw-r--r-- 1 root root 927657 2009-10-03 20:13 ./source/l/apr/apr-1.3.9.tar.bz2 +-rw-r--r-- 1 root root 186 2009-10-03 20:13 ./source/l/apr/apr-1.3.9.tar.bz2.asc +-rwxr-xr-x 1 root root 3352 2010-03-05 21:07 ./source/l/apr/apr.SlackBuild +-rw-r--r-- 1 root root 729 2006-07-29 07:49 ./source/l/apr/slack-desc +drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/aspell +drwxr-xr-x 2 root root 4096 2009-08-13 02:39 ./source/l/aspell-dict +-rw-r--r-- 1 root root 256111 2004-03-15 00:39 ./source/l/aspell-dict/aspell-af-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 68055 2003-04-17 02:03 ./source/l/aspell-dict/aspell-br-0.50-2.tar.bz2 +-rw-r--r-- 1 root root 117652 2003-04-17 02:03 ./source/l/aspell-dict/aspell-cy-0.50-3.tar.bz2 +-rwxr-xr-x 1 root root 2446 2009-05-19 20:05 ./source/l/aspell-dict/aspell-dict.SlackBuild +-rw-r--r-- 1 root root 328225 2003-04-17 02:03 ./source/l/aspell-dict/aspell-el-0.50-3.tar.bz2 +-rw-r--r-- 1 root root 89703 2003-04-17 02:03 ./source/l/aspell-dict/aspell-eo-0.50-2.tar.bz2 +-rw-r--r-- 1 root root 157809 2003-04-17 02:03 ./source/l/aspell-dict/aspell-es-0.50-2.tar.bz2 +-rw-r--r-- 1 root root 283086 2003-04-17 02:03 ./source/l/aspell-dict/aspell-fr-0.50-3.tar.bz2 +-rw-r--r-- 1 root root 112313 2004-03-10 09:57 ./source/l/aspell-dict/aspell-gl-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 69462 2004-04-05 21:17 ./source/l/aspell-dict/aspell-gv-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 208118 2004-03-30 08:07 ./source/l/aspell-dict/aspell-hr-0.51-0.tar.bz2 +-rw-r--r-- 1 root root 70883 2004-03-30 10:04 ./source/l/aspell-dict/aspell-ia-0.50-1.tar.bz2 +-rw-r--r-- 1 root root 323850 2004-03-13 11:17 ./source/l/aspell-dict/aspell-is-0.51.1-0.tar.bz2 +-rw-r--r-- 1 root root 57818 2004-03-15 00:40 ./source/l/aspell-dict/aspell-mi-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 122690 2004-04-23 18:46 ./source/l/aspell-dict/aspell-mk-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 50368 2004-03-15 00:40 ./source/l/aspell-dict/aspell-ms-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 124114 2004-03-25 00:02 ./source/l/aspell-dict/aspell-mt-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 423161 2009-07-21 19:10 ./source/l/aspell-dict/aspell-nb-0.50.1-0.tar.bz2 +-rw-r--r-- 1 root root 428365 2003-04-17 02:03 ./source/l/aspell-dict/aspell-nl-0.50-2.tar.bz2 +-rw-r--r-- 1 root root 335156 2004-04-05 07:11 ./source/l/aspell-dict/aspell-nn-0.50.1-1.tar.bz2 +-rw-r--r-- 1 root root 286696 2003-04-17 02:03 ./source/l/aspell-dict/aspell-no-0.50-2.tar.bz2 +-rw-r--r-- 1 root root 624458 2004-03-10 09:47 ./source/l/aspell-dict/aspell-pl-0.51-0.tar.bz2 +-rw-r--r-- 1 root root 201341 2003-04-17 02:03 ./source/l/aspell-dict/aspell-pt-0.50-2.tar.bz2 +-rw-r--r-- 1 root root 64110 2003-04-17 02:03 ./source/l/aspell-dict/aspell-ro-0.50-2.tar.bz2 +-rw-r--r-- 1 root root 21821 2004-05-19 18:04 ./source/l/aspell-dict/aspell-rw-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 383840 2004-04-16 02:14 ./source/l/aspell-dict/aspell-sk-0.52-0.tar.bz2 +-rw-r--r-- 1 root root 215463 2004-03-15 00:40 ./source/l/aspell-dict/aspell-sl-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 93942 2004-03-10 09:48 ./source/l/aspell-dict/aspell-sv-0.51-0.tar.bz2 +-rw-r--r-- 1 root root 102172 2004-03-29 12:07 ./source/l/aspell-dict/aspell-sw-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 84846 2004-03-29 10:22 ./source/l/aspell-dict/aspell-tr-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 382513 2004-03-10 09:48 ./source/l/aspell-dict/aspell-uk-0.51-0.tar.bz2 +-rw-r--r-- 1 root root 50363 2004-03-29 09:35 ./source/l/aspell-dict/aspell-wa-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 168226 2004-03-29 12:07 ./source/l/aspell-dict/aspell-zu-0.50-0.tar.bz2 +-rw-r--r-- 1 root root 653405 2004-07-05 21:42 ./source/l/aspell-dict/aspell5-be-0.01.tar.bz2 +-rw-r--r-- 1 root root 176676 2004-05-28 15:49 ./source/l/aspell-dict/aspell5-bg-4.0-0.tar.bz2 +-rw-r--r-- 1 root root 317688 2004-08-13 02:35 ./source/l/aspell-dict/aspell5-da-1.4.42-1.tar.bz2 +-rw-r--r-- 1 root root 165901 2004-08-13 02:36 ./source/l/aspell-dict/aspell5-fo-0.2.16-1.tar.bz2 +-rw-r--r-- 1 root root 539910 2005-01-07 21:36 ./source/l/aspell-dict/aspell5-ga-3.6-0.tar.bz2 +-rw-r--r-- 1 root root 51167 2004-08-13 02:37 ./source/l/aspell-dict/aspell5-gd-0.1.1-1.tar.bz2 +-rw-r--r-- 1 root root 46288 2005-04-06 22:05 ./source/l/aspell-dict/aspell5-hil-0.11-0.tar.bz2 +-rw-r--r-- 1 root root 76958 2004-08-12 15:04 ./source/l/aspell-dict/aspell5-id-1.2-0.tar.bz2 +-rw-r--r-- 1 root root 23870 2004-09-22 17:27 ./source/l/aspell-dict/aspell5-ku-0.12-0.tar.bz2 +-rw-r--r-- 1 root root 45331 2004-09-10 23:38 ./source/l/aspell-dict/aspell5-mg-0.03-0.tar.bz2 +-rw-r--r-- 1 root root 22952 2004-08-10 14:49 ./source/l/aspell-dict/aspell5-ny-0.01-0.tar.bz2 +-rw-r--r-- 1 root root 281538 2004-06-01 13:33 ./source/l/aspell-dict/aspell5-sc-1.0.tar.bz2 +-rw-r--r-- 1 root root 33044 2004-06-02 14:11 ./source/l/aspell-dict/aspell5-tet-0.1.1.tar.bz2 +-rw-r--r-- 1 root root 40642 2004-08-06 15:21 ./source/l/aspell-dict/aspell5-tl-0.02-1.tar.bz2 +-rw-r--r-- 1 root root 22127 2004-08-13 02:38 ./source/l/aspell-dict/aspell5-tn-1.0.1-0.tar.bz2 +-rw-r--r-- 1 root root 40493 2004-12-28 14:21 ./source/l/aspell-dict/aspell6-am-0.03-1.tar.bz2 +-rw-r--r-- 1 root root 50588 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-az-0.02-0.tar.bz2 +-rw-r--r-- 1 root root 117436 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-bn-0.01.1-1.tar.bz2 +-rw-r--r-- 1 root root 222986 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-ca-20040130-1.tar.bz2 +-rw-r--r-- 1 root root 451507 2004-08-27 06:06 ./source/l/aspell-dict/aspell6-cs-20040614-1.tar.bz2 +-rw-r--r-- 1 root root 32694 2005-03-11 20:40 ./source/l/aspell-dict/aspell6-csb-0.02-0.tar.bz2 +-rw-r--r-- 1 root root 274407 2004-11-04 02:48 ./source/l/aspell-dict/aspell6-de-20030222-1.tar.bz2 -rw-r--r-- 1 root root 182442 2004-08-27 06:37 ./source/l/aspell-dict/aspell6-en-6.0-0.tar.bz2 -rw-r--r-- 1 root root 338155 2004-08-27 06:11 ./source/l/aspell-dict/aspell6-et-0.1.21-1.tar.bz2 -rw-r--r-- 1 root root 97168 2004-11-04 02:01 ./source/l/aspell-dict/aspell6-fa-0.02-0.tar.bz2 @@ -5817,10 +6112,14 @@ drwxr-xr-x 2 root root 4096 2009-08-13 02:39 ./source/l/aspell-dict -rw-r--r-- 1 root root 1139127 2006-12-19 13:26 ./source/l/aspell/aspell-0.60.5.tar.bz2 -rwxr-xr-x 1 root root 2950 2009-05-23 00:41 ./source/l/aspell/aspell.SlackBuild -rw-r--r-- 1 root root 708 2003-01-13 23:01 ./source/l/aspell/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/atk --rw-r--r-- 1 root root 719807 2009-03-23 15:09 ./source/l/atk/atk-1.26.0.tar.bz2 --rwxr-xr-x 1 root root 2491 2009-05-19 20:05 ./source/l/atk/atk.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-28 15:33 ./source/l/atk +-rw-r--r-- 1 root root 746014 2010-03-30 01:02 ./source/l/atk/atk-1.30.0.tar.bz2 +-rwxr-xr-x 1 root root 2896 2010-04-30 00:35 ./source/l/atk/atk.SlackBuild -rw-r--r-- 1 root root 627 2008-02-11 03:44 ./source/l/atk/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-21 20:56 ./source/l/attica +-rw-r--r-- 1 root root 31790 2010-04-20 20:07 ./source/l/attica/attica-0.1.3.tar.bz2 +-rwxr-xr-x 1 root root 3030 2010-04-20 20:09 ./source/l/attica/attica.SlackBuild +-rw-r--r-- 1 root root 831 2010-05-04 00:18 ./source/l/attica/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/audiofile -rw-r--r-- 1 root root 278694 2004-04-21 19:32 ./source/l/audiofile/audiofile-0.2.6.tar.bz2 -rwxr-xr-x 1 root root 3309 2009-05-19 20:05 ./source/l/audiofile/audiofile.SlackBuild @@ -5829,18 +6128,19 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/automoc4 -rw-r--r-- 1 root root 9153 2009-01-22 18:51 ./source/l/automoc4/automoc4-0.9.88.tar.bz2 -rwxr-xr-x 1 root root 2450 2009-05-19 20:05 ./source/l/automoc4/automoc4.SlackBuild -rw-r--r-- 1 root root 912 2009-01-03 21:13 ./source/l/automoc4/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/babl --rw-r--r-- 1 root root 396413 2008-10-01 19:33 ./source/l/babl/babl-0.0.22.tar.bz2 --rwxr-xr-x 1 root root 2626 2009-05-19 20:05 ./source/l/babl/babl.SlackBuild +drwxr-xr-x 2 root root 4096 2009-10-28 19:32 ./source/l/babl +-rw-r--r-- 1 root root 372 2009-09-01 08:50 ./source/l/babl/babl-0.1.0-build-fixes.patch.gz +-rw-r--r-- 1 root root 406488 2009-05-21 14:39 ./source/l/babl/babl-0.1.0.tar.bz2 +-rwxr-xr-x 1 root root 2705 2009-10-28 19:59 ./source/l/babl/babl.SlackBuild -rw-r--r-- 1 root root 975 2008-10-02 04:36 ./source/l/babl/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-25 01:45 ./source/l/boost --rwxr-xr-x 1 root root 4607 2009-08-25 02:12 ./source/l/boost/boost.SlackBuild --rw-r--r-- 1 root root 282 2009-08-25 01:45 ./source/l/boost/boost.ifdef_placement.diff.gz --rw-r--r-- 1 root root 29164877 2009-02-08 13:09 ./source/l/boost/boost_1_38_0.tar.bz2 +drwxr-xr-x 2 root root 4096 2010-05-06 05:19 ./source/l/boost +-rwxr-xr-x 1 root root 4944 2010-05-06 04:42 ./source/l/boost/boost.SlackBuild +-rw-r--r-- 1 root root 29398612 2010-02-02 12:09 ./source/l/boost/boost_1_42_0.tar.xz -rw-r--r-- 1 root root 889 2008-08-01 01:35 ./source/l/boost/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/cairo --rw-r--r-- 1 root root 5367390 2008-12-14 16:32 ./source/l/cairo/cairo-1.8.6.tar.bz2 --rwxr-xr-x 1 root root 2675 2009-06-09 00:45 ./source/l/cairo/cairo.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 05:12 ./source/l/cairo +-rw-r--r-- 1 root root 4461032 2009-06-16 13:07 ./source/l/cairo/cairo-1.8.8.tar.xz +-rwxr-xr-x 1 root root 3070 2010-05-03 05:10 ./source/l/cairo/cairo.SlackBuild +-rw-r--r-- 1 root root 250 2010-05-03 05:12 ./source/l/cairo/cairo.libpng14.diff.gz -rw-r--r-- 1 root root 851 2006-01-18 02:12 ./source/l/cairo/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/chmlib -rw-r--r-- 1 root root 263013 2007-01-25 02:26 ./source/l/chmlib/chmlib-0.39.tar.bz2 @@ -5866,51 +6166,64 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/db44 -rw-r--r-- 1 root root 515 2006-02-03 06:33 ./source/l/db44/patch.4.4.20.1.gz -rw-r--r-- 1 root root 392 2006-02-03 06:33 ./source/l/db44/patch.4.4.20.2.gz -rw-r--r-- 1 root root 818 2006-03-08 22:05 ./source/l/db44/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/dbus-glib --rw-r--r-- 1 root root 688789 2009-03-09 17:26 ./source/l/dbus-glib/dbus-glib-0.80.tar.gz --rwxr-xr-x 1 root root 2742 2009-05-19 20:05 ./source/l/dbus-glib/dbus-glib.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-27 00:52 ./source/l/dbus-glib +-rw-r--r-- 1 root root 449664 2010-03-25 00:27 ./source/l/dbus-glib/dbus-glib-0.86.tar.xz +-rwxr-xr-x 1 root root 3064 2010-04-27 00:55 ./source/l/dbus-glib/dbus-glib.SlackBuild -rw-r--r-- 1 root root 681 2007-03-16 03:46 ./source/l/dbus-glib/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/dbus-python --rw-r--r-- 1 root root 393145 2008-09-23 18:04 ./source/l/dbus-python/dbus-python-0.83.0.tar.bz2 --rwxr-xr-x 1 root root 2813 2009-05-19 20:05 ./source/l/dbus-python/dbus-python.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-27 00:56 ./source/l/dbus-python +-rw-r--r-- 1 root root 533391 2010-02-18 17:43 ./source/l/dbus-python/dbus-python-0.83.1.tar.gz +-rwxr-xr-x 1 root root 3123 2010-04-27 00:56 ./source/l/dbus-python/dbus-python.SlackBuild -rw-r--r-- 1 root root 702 2008-04-04 16:21 ./source/l/dbus-python/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/desktop-file-utils --rw-r--r-- 1 root root 242650 2008-10-07 20:21 ./source/l/desktop-file-utils/desktop-file-utils-0.15.tar.bz2 --rwxr-xr-x 1 root root 3398 2009-05-19 20:05 ./source/l/desktop-file-utils/desktop-file-utils.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-11 14:02 ./source/l/desktop-file-utils +-rw-r--r-- 1 root root 282640 2010-03-10 03:12 ./source/l/desktop-file-utils/desktop-file-utils-0.16.tar.bz2 +-rwxr-xr-x 1 root root 4151 2010-05-11 14:02 ./source/l/desktop-file-utils/desktop-file-utils.SlackBuild +-rw-r--r-- 1 root root 354 2010-05-11 14:01 ./source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff.gz -rw-r--r-- 1 root root 128 2008-10-07 22:57 ./source/l/desktop-file-utils/doinst.sh.gz -rw-r--r-- 1 root root 1124 2006-09-17 22:26 ./source/l/desktop-file-utils/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/djvulibre --rw-r--r-- 1 root root 2666939 2008-08-23 12:35 ./source/l/djvulibre/djvulibre-3.5.21.tar.bz2 --rwxr-xr-x 1 root root 3787 2009-05-19 20:05 ./source/l/djvulibre/djvulibre.SlackBuild --rw-r--r-- 1 root root 257 2008-04-11 18:10 ./source/l/djvulibre/djvulibre.info --rw-r--r-- 1 root root 140 2008-04-11 19:37 ./source/l/djvulibre/doinst.sh.gz +drwxr-xr-x 2 root root 4096 2009-11-28 04:37 ./source/l/djvulibre +-rw-r--r-- 1 root root 2431756 2009-05-21 15:48 ./source/l/djvulibre/djvulibre-3.5.22.tar.xz +-rwxr-xr-x 1 root root 4167 2010-02-14 23:31 ./source/l/djvulibre/djvulibre.SlackBuild +-rw-r--r-- 1 root root 257 2009-11-28 04:37 ./source/l/djvulibre/djvulibre.info +-rw-r--r-- 1 root root 140 2009-11-28 04:37 ./source/l/djvulibre/doinst.sh.gz -rw-r--r-- 1 root root 1019 2008-08-01 02:56 ./source/l/djvulibre/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/eigen2 --rw-r--r-- 1 root root 414048 2009-04-02 20:30 ./source/l/eigen2/eigen2-r948353.tar.bz2 --rwxr-xr-x 1 root root 2576 2009-05-19 20:05 ./source/l/eigen2/eigen2.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/ebook-tools +-rw-r--r-- 1 root root 37866 2010-01-29 11:38 ./source/l/ebook-tools/ebook-tools-0.1.1.tar.bz2 +-rwxr-xr-x 1 root root 3475 2010-03-26 23:24 ./source/l/ebook-tools/ebook-tools.SlackBuild +-rw-r--r-- 1 root root 742 2010-03-26 23:18 ./source/l/ebook-tools/ebook-tools.paths.diff +-rw-r--r-- 1 root root 781 2010-05-04 00:18 ./source/l/ebook-tools/slack-desc +drwxr-xr-x 2 root root 4096 2010-01-06 23:19 ./source/l/eggdbus +-rw-r--r-- 1 root root 163804 2010-01-06 23:19 ./source/l/eggdbus/eggdbus-0.6.tar.bz2 +-rwxr-xr-x 1 root root 3612 2010-03-25 07:56 ./source/l/eggdbus/eggdbus.SlackBuild +-rw-r--r-- 1 root root 688 2010-05-04 00:19 ./source/l/eggdbus/slack-desc +drwxr-xr-x 2 root root 4096 2009-11-28 04:16 ./source/l/eigen2 +-rw-r--r-- 1 root root 327460 2009-11-25 13:46 ./source/l/eigen2/eigen2-2.0.10.tar.xz +-rwxr-xr-x 1 root root 2874 2009-12-17 02:23 ./source/l/eigen2/eigen2.SlackBuild -rw-r--r-- 1 root root 712 2008-11-23 23:23 ./source/l/eigen2/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/enchant --rw-r--r-- 1 root root 465386 2008-05-05 20:30 ./source/l/enchant/enchant-1.4.2.tar.bz2 --rwxr-xr-x 1 root root 2984 2009-05-19 20:05 ./source/l/enchant/enchant.SlackBuild --rw-r--r-- 1 root root 113 2008-07-24 14:53 ./source/l/enchant/enchant.info +drwxr-xr-x 2 root root 4096 2009-12-05 17:48 ./source/l/enchant +-rw-r--r-- 1 root root 359608 2009-12-05 17:48 ./source/l/enchant/enchant-1.5.0.tar.xz +-rwxr-xr-x 1 root root 3293 2009-12-17 03:01 ./source/l/enchant/enchant.SlackBuild +-rw-r--r-- 1 root root 113 2009-12-05 17:48 ./source/l/enchant/enchant.info -rw-r--r-- 1 root root 802 2008-08-01 04:51 ./source/l/enchant/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/esound -rw-r--r-- 1 root root 262 2009-03-23 15:57 ./source/l/esound/doinst.sh.gz -rw-r--r-- 1 root root 396474 2009-03-23 15:10 ./source/l/esound/esound-0.2.41.tar.bz2 -rwxr-xr-x 1 root root 3254 2009-05-19 20:05 ./source/l/esound/esound.SlackBuild -rw-r--r-- 1 root root 962 2002-04-02 06:54 ./source/l/esound/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-22 19:17 ./source/l/exiv2 --rw-r--r-- 1 root root 1165544 2009-04-05 15:53 ./source/l/exiv2/exiv2-0.18.1.tar.xz --rwxr-xr-x 1 root root 2883 2009-06-22 19:23 ./source/l/exiv2/exiv2.SlackBuild +drwxr-xr-x 2 root root 4096 2009-11-28 04:35 ./source/l/exiv2 +-rw-r--r-- 1 root root 1216024 2009-06-24 13:41 ./source/l/exiv2/exiv2-0.18.2.tar.xz +-rwxr-xr-x 1 root root 3193 2009-12-17 02:21 ./source/l/exiv2/exiv2.SlackBuild -rw-r--r-- 1 root root 714 2008-08-01 04:53 ./source/l/exiv2/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/expat -rw-r--r-- 1 root root 446456 2007-06-07 02:37 ./source/l/expat/expat-2.0.1.tar.gz -rwxr-xr-x 1 root root 2379 2009-05-19 20:05 ./source/l/expat/expat.SlackBuild -rw-r--r-- 1 root root 720 2008-02-11 03:44 ./source/l/expat/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/freetype --rw-r--r-- 1 root root 1363190 2009-03-12 09:57 ./source/l/freetype/freetype-2.3.9.tar.bz2 --rw-r--r-- 1 root root 34432 2009-03-13 17:53 ./source/l/freetype/freetype-2.3.9.tar.bz2.asc --rwxr-xr-x 1 root root 3851 2009-05-19 20:05 ./source/l/freetype/freetype.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-17 01:38 ./source/l/fftw +-rw-r--r-- 1 root root 1937412 2009-07-14 10:31 ./source/l/fftw/fftw-3.2.2.tar.xz +-rwxr-xr-x 1 root root 3591 2009-12-17 01:48 ./source/l/fftw/fftw.SlackBuild +-rw-r--r-- 1 root root 961 2009-09-27 01:12 ./source/l/fftw/slack-desc +drwxr-xr-x 2 root root 4096 2010-03-12 00:33 ./source/l/freetype +-rw-r--r-- 1 root root 1244664 2010-02-13 07:32 ./source/l/freetype/freetype-2.3.12.tar.xz +-rwxr-xr-x 1 root root 4247 2010-03-12 00:33 ./source/l/freetype/freetype.SlackBuild -rw-r--r-- 1 root root 302 2007-09-13 01:58 ./source/l/freetype/freetype.bytecode.interpreter.diff.gz -rw-r--r-- 1 root root 493 2004-06-05 20:44 ./source/l/freetype/freetype.illadvisederror.diff.gz -rw-r--r-- 1 root root 295 2007-04-21 20:07 ./source/l/freetype/freetype.subpixel.rendering.diff.gz @@ -5919,51 +6232,54 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/fribidi -rw-r--r-- 1 root root 490862 2007-08-09 23:44 ./source/l/fribidi/fribidi-0.10.9.tar.bz2 -rwxr-xr-x 1 root root 2461 2009-05-19 20:05 ./source/l/fribidi/fribidi.SlackBuild -rw-r--r-- 1 root root 811 2008-04-08 03:40 ./source/l/fribidi/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/fuse +drwxr-xr-x 2 root root 4096 2009-12-01 15:26 ./source/l/fuse -rw-r--r-- 1 root root 336 2007-12-07 22:12 ./source/l/fuse/doinst.sh.gz --rw-r--r-- 1 root root 506658 2008-07-25 19:05 ./source/l/fuse/fuse-2.7.4.tar.gz --rwxr-xr-x 1 root root 3449 2009-05-19 20:05 ./source/l/fuse/fuse.SlackBuild +-rw-r--r-- 1 root root 492871 2009-12-01 15:24 ./source/l/fuse/fuse-2.8.1.tar.gz +-rwxr-xr-x 1 root root 4029 2010-02-09 21:37 ./source/l/fuse/fuse.SlackBuild -rw-r--r-- 1 root root 846 2008-03-08 01:51 ./source/l/fuse/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/gamin -rw-r--r-- 1 root root 438451 2009-03-09 18:58 ./source/l/gamin/gamin-0.1.10.tar.bz2 -rwxr-xr-x 1 root root 2866 2009-05-19 20:05 ./source/l/gamin/gamin.SlackBuild -rw-r--r-- 1 root root 753 2007-03-16 02:26 ./source/l/gamin/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/gd +drwxr-xr-x 2 root root 4096 2010-02-12 07:44 ./source/l/gd -rw-r--r-- 1 root root 1212730 2007-06-21 19:48 ./source/l/gd/gd-2.0.35.tar.bz2 --rwxr-xr-x 1 root root 3384 2009-06-09 00:40 ./source/l/gd/gd.SlackBuild --rw-r--r-- 1 root root 366 2007-06-27 06:07 ./source/l/gd/gdlib.pc +-rwxr-xr-x 1 root root 3770 2010-02-12 07:38 ./source/l/gd/gd.SlackBuild +-rw-r--r-- 1 root root 1088 2010-02-12 07:44 ./source/l/gd/gd.png14.diff.gz +-rw-r--r-- 1 root root 366 2010-02-18 03:20 ./source/l/gd/gdlib.pc -rw-r--r-- 1 root root 922 2006-08-16 06:37 ./source/l/gd/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/gdbm -rw-r--r-- 1 root root 228695 2002-10-16 18:01 ./source/l/gdbm/gdbm-1.8.3.tar.gz -rwxr-xr-x 1 root root 2893 2009-05-19 20:05 ./source/l/gdbm/gdbm.SlackBuild -rw-r--r-- 1 root root 641 2002-03-23 23:12 ./source/l/gdbm/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 18:59 ./source/l/gegl --rw-r--r-- 1 root root 1255087 2008-12-31 16:50 ./source/l/gegl/gegl-0.0.22.tar.bz2 --rwxr-xr-x 1 root root 2703 2009-06-09 18:59 ./source/l/gegl/gegl.SlackBuild +drwxr-xr-x 2 root root 4096 2009-10-27 19:55 ./source/l/gegl +-rw-r--r-- 1 root root 1342198 2009-07-01 17:42 ./source/l/gegl/gegl-0.1.0.tar.bz2 +-rwxr-xr-x 1 root root 3407 2010-02-16 04:20 ./source/l/gegl/gegl.SlackBuild -rw-r--r-- 1 root root 862 2008-10-02 04:29 ./source/l/gegl/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-06 22:20 ./source/l/giflib +-rw-r--r-- 1 root root 403232 2009-07-01 15:42 ./source/l/giflib/giflib-4.1.6.tar.xz +-rwxr-xr-x 1 root root 3450 2010-02-06 22:19 ./source/l/giflib/giflib.SlackBuild +-rw-r--r-- 1 root root 776 2009-07-01 15:44 ./source/l/giflib/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/glib -rw-r--r-- 1 root root 346080 2001-03-15 14:59 ./source/l/glib/glib-1.2.10.tar.bz2 -rwxr-xr-x 1 root root 3427 2009-05-19 20:05 ./source/l/glib/glib.SlackBuild -rw-r--r-- 1 root root 110117 2006-12-01 09:17 ./source/l/glib/glib1.2_1.2.10-17.diff.bz2 -rw-r--r-- 1 root root 757 2007-03-08 16:59 ./source/l/glib/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/glib2 +drwxr-xr-x 2 root root 4096 2010-03-19 16:44 ./source/l/glib2 -rw-r--r-- 1 root root 406 2008-04-10 04:31 ./source/l/glib2/doinst.sh.gz --rw-r--r-- 1 root root 4809051 2009-01-09 19:36 ./source/l/glib2/glib-2.18.4.tar.bz2 --rw-r--r-- 1 root root 1062 2009-03-12 14:38 ./source/l/glib2/glib-CVE-2008-4316.diff.gz --rwxr-xr-x 1 root root 3122 2009-05-19 20:05 ./source/l/glib2/glib2.SlackBuild +-rw-r--r-- 1 root root 3573316 2010-03-16 12:09 ./source/l/glib2/glib-2.22.5.tar.xz +-rwxr-xr-x 1 root root 3724 2010-02-06 23:54 ./source/l/glib2/glib2.SlackBuild -rw-r--r-- 1 root root 999 2008-03-18 07:10 ./source/l/glib2/libglib2.csh -rw-r--r-- 1 root root 982 2008-03-18 07:08 ./source/l/glib2/libglib2.sh -rw-r--r-- 1 root root 691 2003-01-11 05:50 ./source/l/glib2/slack-desc -drwxr-xr-x 4 root root 4096 2009-05-19 20:05 ./source/l/glibc --rw-r--r-- 1 root root 7244 2009-01-29 04:59 ./source/l/glibc/doinst.sh-glibc --rw-r--r-- 1 root root 4504 2009-01-29 04:59 ./source/l/glibc/doinst.sh-glibc-solibs +drwxr-xr-x 4 root root 4096 2010-05-12 05:29 ./source/l/glibc +-rw-r--r-- 1 root root 7282 2009-12-31 00:26 ./source/l/glibc/doinst.sh-glibc +-rw-r--r-- 1 root root 4542 2009-12-31 00:27 ./source/l/glibc/doinst.sh-glibc-solibs -rw-r--r-- 1 root root 1029 2007-02-18 04:26 ./source/l/glibc/doinst.sh-glibc-zoneinfo -rw-r--r-- 1 root root 652 2009-01-09 04:49 ./source/l/glibc/glibc-2.10-dns-no-gethostbyname4.diff.gz --rw-r--r-- 1 root root 16425893 2009-03-16 08:07 ./source/l/glibc/glibc-2.9-20090316.tar.bz2 +-rw-r--r-- 1 root root 10113940 2009-12-29 16:01 ./source/l/glibc/glibc-2.11.1.tar.xz +-rw-r--r-- 1 root root 198 2009-12-29 16:01 ./source/l/glibc/glibc-2.11.1.tar.xz.sig -rwxr-xr-x 1 root root 174 2004-08-09 06:21 ./source/l/glibc/glibc-cvs-checkout.sh --rw-r--r-- 1 root root 101939 2007-10-19 21:45 ./source/l/glibc/glibc-libidn-2.7.tar.bz2 --rw-r--r-- 1 root root 65 2007-10-19 21:45 ./source/l/glibc/glibc-libidn-2.7.tar.bz2.sig --rwxr-xr-x 1 root root 14481 2009-05-19 20:05 ./source/l/glibc/glibc.SlackBuild +-rwxr-xr-x 1 root root 14965 2010-05-12 05:30 ./source/l/glibc/glibc.SlackBuild -rw-r--r-- 1 root root 183 2006-10-11 03:11 ./source/l/glibc/glibc.getcwd.max.macro.diff.gz -rw-r--r-- 1 root root 304 2004-08-04 00:21 ./source/l/glibc/glibc.locale.no-archive.diff.gz -rw-r--r-- 1 root root 325 2006-10-11 01:49 ./source/l/glibc/glibc.nis-netgroups.diff.gz @@ -5991,47 +6307,51 @@ drwxr-xr-x 2 root root 4096 2006-12-03 23:10 ./source/l/glibc/timezone-scr -rw-r--r-- 1 root root 87 2006-12-03 23:10 ./source/l/glibc/timezone-scripts/parts/README -rw-r--r-- 1 root root 66 2003-02-16 21:17 ./source/l/glibc/timezone-scripts/setup.timeconfig -rw-r--r-- 1 root root 84202 2009-02-25 00:09 ./source/l/glibc/timezone-scripts/timeconfig --rw-r--r-- 1 root root 190134 2009-03-23 13:38 ./source/l/glibc/tzcode2009d.tar.gz --rw-r--r-- 1 root root 176911 2009-03-23 13:38 ./source/l/glibc/tzdata2009d.tar.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/gmime --rw-r--r-- 1 root root 823466 2008-09-14 17:48 ./source/l/gmime/gmime-2.2.23.tar.bz2 --rwxr-xr-x 1 root root 3304 2009-05-19 20:05 ./source/l/gmime/gmime.SlackBuild +-rw-r--r-- 1 root root 191844 2010-05-10 13:07 ./source/l/glibc/tzcode2010j.tar.gz +-rw-r--r-- 1 root root 189870 2010-05-10 13:07 ./source/l/glibc/tzdata2010j.tar.gz +drwxr-xr-x 2 root root 4096 2010-02-03 23:41 ./source/l/gmime +-rw-r--r-- 1 root root 719516 2010-02-02 15:00 ./source/l/gmime/gmime-2.4.15.tar.xz +-rwxr-xr-x 1 root root 3655 2010-02-04 00:12 ./source/l/gmime/gmime.SlackBuild -rw-r--r-- 1 root root 753 2007-03-14 03:39 ./source/l/gmime/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/gmm -rw-r--r-- 1 root root 333173 2008-09-09 18:47 ./source/l/gmm/gmm-3.1.tar.bz2 -rwxr-xr-x 1 root root 2111 2009-05-19 20:05 ./source/l/gmm/gmm.SlackBuild -rw-r--r-- 1 root root 117 2008-07-25 02:47 ./source/l/gmm/gmm.info -rw-r--r-- 1 root root 1035 2008-08-01 03:49 ./source/l/gmm/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/gmp --rw-r--r-- 1 root root 1710660 2008-09-20 10:16 ./source/l/gmp/gmp-4.2.4.tar.bz2 --rw-r--r-- 1 root root 72 2008-09-20 10:16 ./source/l/gmp/gmp-4.2.4.tar.bz2.sig --rwxr-xr-x 1 root root 2569 2009-05-19 20:05 ./source/l/gmp/gmp.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-24 02:20 ./source/l/gmp +-rw-r--r-- 1 root root 1656884 2010-02-06 12:51 ./source/l/gmp/gmp-5.0.1.tar.xz +-rwxr-xr-x 1 root root 3225 2010-02-24 02:23 ./source/l/gmp/gmp.SlackBuild -rw-r--r-- 1 root root 766 2003-06-24 00:14 ./source/l/gmp/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-14 19:52 ./source/l/gnome-icon-theme +drwxr-xr-x 2 root root 4096 2010-04-28 15:29 ./source/l/gnome-icon-theme -rw-r--r-- 1 root root 138 2009-07-14 19:52 ./source/l/gnome-icon-theme/doinst.sh.gz --rw-r--r-- 1 root root 2964056 2009-07-10 21:40 ./source/l/gnome-icon-theme/gnome-icon-theme-2.26.0.tar.xz --rwxr-xr-x 1 root root 2427 2009-07-14 21:47 ./source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild --rw-r--r-- 1 root root 345 2008-02-10 01:56 ./source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff.gz +-rw-r--r-- 1 root root 12171220 2010-04-27 16:32 ./source/l/gnome-icon-theme/gnome-icon-theme-2.30.2.tar.xz +-rwxr-xr-x 1 root root 3083 2010-02-12 00:52 ./source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild +-rw-r--r-- 1 root root 414 2010-04-28 15:29 ./source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff.gz -rw-r--r-- 1 root root 766 2008-02-11 03:44 ./source/l/gnome-icon-theme/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 00:07 ./source/l/gst-plugins-base --rw-r--r-- 1 root root 1674440 2009-05-11 01:47 ./source/l/gst-plugins-base/gst-plugins-base-0.10.23.tar.xz --rwxr-xr-x 1 root root 3001 2009-06-09 00:07 ./source/l/gst-plugins-base/gst-plugins-base.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-28 16:13 ./source/l/gst-plugins-base +-rw-r--r-- 1 root root 1861688 2010-04-28 01:14 ./source/l/gst-plugins-base/gst-plugins-base-0.10.29.tar.xz +-rwxr-xr-x 1 root root 3696 2010-02-11 21:17 ./source/l/gst-plugins-base/gst-plugins-base.SlackBuild -rw-r--r-- 1 root root 1067 2008-08-01 03:34 ./source/l/gst-plugins-base/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-08 23:38 ./source/l/gstreamer --rw-r--r-- 1 root root 2367044 2009-05-11 01:44 ./source/l/gstreamer/gstreamer-0.10.23.tar.xz --rwxr-xr-x 1 root root 3274 2009-06-08 23:38 ./source/l/gstreamer/gstreamer.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-28 16:21 ./source/l/gst-plugins-good +-rw-r--r-- 1 root root 2217460 2010-04-28 01:56 ./source/l/gst-plugins-good/gst-plugins-good-0.10.22.tar.xz +-rwxr-xr-x 1 root root 3933 2010-04-28 16:21 ./source/l/gst-plugins-good/gst-plugins-good.SlackBuild +-rw-r--r-- 1 root root 902 2009-11-03 21:04 ./source/l/gst-plugins-good/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-28 16:13 ./source/l/gstreamer +-rw-r--r-- 1 root root 2675396 2010-04-27 22:30 ./source/l/gstreamer/gstreamer-0.10.29.tar.xz +-rwxr-xr-x 1 root root 4042 2010-02-11 21:09 ./source/l/gstreamer/gstreamer.SlackBuild -rw-r--r-- 1 root root 1060 2008-08-01 03:31 ./source/l/gstreamer/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/gtk+ -rw-r--r-- 1 root root 2248773 2001-04-02 03:04 ./source/l/gtk+/gtk+-1.2.10.tar.bz2 -rwxr-xr-x 1 root root 3533 2009-06-09 02:22 ./source/l/gtk+/gtk+.SlackBuild -rw-r--r-- 1 root root 159953 2005-10-06 11:17 ./source/l/gtk+/gtk+1.2_1.2.10-18.diff.bz2 -rw-r--r-- 1 root root 806 2007-03-08 17:07 ./source/l/gtk+/slack-desc -drwxr-xr-x 3 root root 4096 2009-06-09 03:59 ./source/l/gtk+2 +drwxr-xr-x 3 root root 4096 2010-03-19 16:45 ./source/l/gtk+2 -rw-r--r-- 1 root root 673 2009-04-06 00:28 ./source/l/gtk+2/doinst.sh.gz --rw-r--r-- 1 root root 17475873 2009-01-09 01:19 ./source/l/gtk+2/gtk+-2.14.7.tar.bz2 --rwxr-xr-x 1 root root 6118 2009-06-11 17:15 ./source/l/gtk+2/gtk+2.SlackBuild --rw-r--r-- 1 root root 291 2008-12-17 03:35 ./source/l/gtk+2/gtk.nsplugin.diff.gz --rw-r--r-- 1 root root 238 2008-12-16 21:37 ./source/l/gtk+2/gtk.pnglz.diff.gz +-rw-r--r-- 1 root root 11812004 2010-03-17 17:22 ./source/l/gtk+2/gtk+-2.18.9.tar.xz +-rwxr-xr-x 1 root root 6881 2010-03-16 19:13 ./source/l/gtk+2/gtk+2.SlackBuild +-rw-r--r-- 1 root root 337 2010-02-12 06:48 ./source/l/gtk+2/gtk.png14.diff.gz +-rw-r--r-- 1 root root 236 2009-12-04 03:57 ./source/l/gtk+2/gtk.pnglz.diff.gz +-rw-r--r-- 1 root root 265 2010-02-08 20:43 ./source/l/gtk+2/gtk.xid.nowarningflood.diff.gz drwxr-xr-x 2 root root 4096 2003-01-11 06:27 ./source/l/gtk+2/profile.d -rwxr-xr-x 1 root root 32 2003-01-11 06:27 ./source/l/gtk+2/profile.d/gtk+.csh -rwxr-xr-x 1 root root 43 2003-01-11 06:28 ./source/l/gtk+2/profile.d/gtk+.sh @@ -6042,36 +6362,38 @@ drwxr-xr-x 2 root root 4096 2009-06-09 05:27 ./source/l/gtkspell -rw-r--r-- 1 root root 277039 2008-12-03 21:24 ./source/l/gtkspell/gtkspell-2.0.15.tar.bz2 -rwxr-xr-x 1 root root 3288 2009-05-19 20:05 ./source/l/gtkspell/gtkspell.SlackBuild -rw-r--r-- 1 root root 789 2008-09-18 22:42 ./source/l/gtkspell/slack-desc -drwxr-xr-x 3 root root 4096 2009-07-30 21:24 ./source/l/hal -drwxr-xr-x 2 root root 4096 2009-07-19 23:47 ./source/l/hal-info --rw-r--r-- 1 root root 138674 2009-07-16 13:30 ./source/l/hal-info/hal-info-20090716.tar.gz --rwxr-xr-x 1 root root 2064 2009-07-16 17:21 ./source/l/hal-info/hal-info.SlackBuild +drwxr-xr-x 3 root root 4096 2010-02-09 03:10 ./source/l/hal +drwxr-xr-x 3 root root 4096 2009-12-31 22:04 ./source/l/hal-info +-rw-r--r-- 1 root root 108915 2009-12-01 03:07 ./source/l/hal-info/hal-info-20091130.tar.bz2 +-rwxr-xr-x 1 root root 2273 2010-02-09 03:15 ./source/l/hal-info/hal-info.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-31 22:04 ./source/l/hal-info/patches +-rw-r--r-- 1 root root 952 2009-12-31 22:04 ./source/l/hal-info/patches/quirk-LG_X110-keyboard.patch.gz +-rw-r--r-- 1 root root 603 2009-12-31 22:02 ./source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch.gz -rw-r--r-- 1 root root 757 2009-04-14 19:53 ./source/l/hal-info/slack-desc --rw-r--r-- 1 root root 354 2008-05-08 03:57 ./source/l/hal/doinst.sh.gz --rw-r--r-- 1 root root 1080892 2008-05-07 23:40 ./source/l/hal/hal-0.5.11.tar.xz --rwxr-xr-x 1 root root 5606 2009-08-01 05:46 ./source/l/hal/hal.SlackBuild --rw-r--r-- 1 root root 643 2009-07-16 22:52 ./source/l/hal/hal.conf.gz -drwxr-xr-x 2 root root 4096 2009-07-30 21:23 ./source/l/hal/patches --rw-r--r-- 1 root root 1205 2009-07-21 05:06 ./source/l/hal/patches/10-keymap.fdi-restore_zap.diff.gz --rw-r--r-- 1 root root 423 2009-07-16 21:15 ./source/l/hal/patches/allow_uid_gid_ntfs.diff.gz --rw-r--r-- 1 root root 641 2009-07-16 19:42 ./source/l/hal/patches/check_udi_properly.diff.gz --rw-r--r-- 1 root root 658 2009-07-16 21:19 ./source/l/hal/patches/fix_led_crash.diff.gz --rw-r--r-- 1 root root 758 2009-07-16 21:24 ./source/l/hal/patches/fix_md_crash.diff.gz --rw-r--r-- 1 root root 681 2009-07-30 21:23 ./source/l/hal/patches/fix_segfault_in_mdraid.diff.gz --rw-r--r-- 1 root root 991 2009-07-16 21:20 ./source/l/hal/patches/fixup_udi_strings.diff.gz --rw-r--r-- 1 root root 1047 2009-07-30 21:17 ./source/l/hal/patches/hide_more_invalid_partitions.diff.gz --rw-r--r-- 1 root root 974 2009-07-16 21:22 ./source/l/hal/patches/ignore_dupe_add_events.diff.gz --rw-r--r-- 1 root root 486 2009-07-27 01:50 ./source/l/hal/patches/regen_fdi_cache_if_zero_size.diff.gz --rw-r--r-- 1 root root 1131 2009-07-16 21:24 ./source/l/hal/patches/set_X_keymap_properly.diff.gz --rw-r--r-- 1 root root 709 2009-07-16 21:18 ./source/l/hal/patches/use_udevadm_not_udevinfo.patch.gz --rw-r--r-- 1 root root 438 2009-03-25 20:36 ./source/l/hal/rc.hald.gz --rw-r--r-- 1 root root 1055 2008-05-13 00:48 ./source/l/hal/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/hicolor-icon-theme +-rw-r--r-- 1 root root 346 2009-07-15 08:09 ./source/l/hal/doinst.sh.gz +-rw-r--r-- 1 root root 762460 2009-11-30 22:28 ./source/l/hal/hal-0.5.14.tar.xz +-rwxr-xr-x 1 root root 5678 2010-03-04 00:22 ./source/l/hal/hal.SlackBuild +-rw-r--r-- 1 root root 643 2009-09-09 06:02 ./source/l/hal/hal.conf.gz +drwxr-xr-x 2 root root 4096 2010-03-04 00:20 ./source/l/hal/patches +-rw-r--r-- 1 root root 1338 2009-12-12 06:06 ./source/l/hal/patches/10-keymap.fdi-restore_zap.diff.gz +-rw-r--r-- 1 root root 679 2010-03-04 00:18 ./source/l/hal/patches/fix_ioperm_arguments.patch.gz +-rw-r--r-- 1 root root 970 2009-12-12 06:04 ./source/l/hal/patches/fix_libusb_detection.diff.gz +-rw-r--r-- 1 root root 1274 2010-03-04 00:16 ./source/l/hal/patches/fix_segfault-dbus_error_init.patch.gz +-rw-r--r-- 1 root root 1037 2009-12-31 02:02 ./source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff.gz +-rw-r--r-- 1 root root 1009 2010-01-20 03:52 ./source/l/hal/patches/handle_input.touchpad_explicitly.diff.gz +-rw-r--r-- 1 root root 641 2010-01-09 00:01 ./source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff.gz +-rw-r--r-- 1 root root 438 2009-09-09 05:38 ./source/l/hal/rc.hald.gz +-rw-r--r-- 1 root root 918 2009-07-15 08:08 ./source/l/hal/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-27 20:39 ./source/l/hicolor-icon-theme -rw-r--r-- 1 root root 542 2008-03-18 01:10 ./source/l/hicolor-icon-theme/doinst.sh.gz --rw-r--r-- 1 root root 33616 2006-11-22 12:02 ./source/l/hicolor-icon-theme/hicolor-icon-theme-0.10.tar.gz --rwxr-xr-x 1 root root 2270 2009-05-19 20:05 ./source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild +-rw-r--r-- 1 root root 38008 2010-01-13 10:20 ./source/l/hicolor-icon-theme/hicolor-icon-theme-0.12.tar.gz +-rwxr-xr-x 1 root root 2277 2010-04-30 00:40 ./source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild -rw-r--r-- 1 root root 522 2008-03-18 01:11 ./source/l/hicolor-icon-theme/setup.08.gtk-update-icon-cache -rw-r--r-- 1 root root 914 2006-08-11 03:58 ./source/l/hicolor-icon-theme/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:43 ./source/l/hunspell +-rw-r--r-- 1 root root 505780 2010-03-03 20:36 ./source/l/hunspell/hunspell-1.2.9.tar.xz +-rwxr-xr-x 1 root root 3525 2010-03-26 21:52 ./source/l/hunspell/hunspell.SlackBuild +-rw-r--r-- 1 root root 964 2010-03-21 22:20 ./source/l/hunspell/slack-desc drwxr-xr-x 2 root root 4096 2009-03-05 23:09 ./source/l/icon-naming-utils -rw-r--r-- 1 root root 70352 2009-02-21 03:41 ./source/l/icon-naming-utils/icon-naming-utils-0.8.90.tar.gz -rwxr-xr-x 1 root root 2235 2009-08-22 19:44 ./source/l/icon-naming-utils/icon-naming-utils.SlackBuild @@ -6082,9 +6404,9 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/ilmbase -rwxr-xr-x 1 root root 2695 2009-05-19 20:05 ./source/l/ilmbase/ilmbase.SlackBuild -rw-r--r-- 1 root root 162 2008-04-29 21:14 ./source/l/ilmbase/ilmbase.info -rw-r--r-- 1 root root 829 2008-08-01 03:47 ./source/l/ilmbase/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/imlib --rw-r--r-- 1 root root 683242 2004-09-24 14:45 ./source/l/imlib/imlib-1.9.15.tar.bz2 --rwxr-xr-x 1 root root 2877 2009-08-11 04:00 ./source/l/imlib/imlib.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-11 21:10 ./source/l/imlib +-rw-r--r-- 1 root root 605220 2004-09-24 14:45 ./source/l/imlib/imlib-1.9.15.tar.xz +-rwxr-xr-x 1 root root 3193 2010-02-11 21:10 ./source/l/imlib/imlib.SlackBuild -rw-r--r-- 1 root root 799 2008-04-28 21:21 ./source/l/imlib/imlib.mitshm.render.diff.gz -rw-r--r-- 1 root root 857 2008-02-11 03:44 ./source/l/imlib/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/iso-codes @@ -6094,45 +6416,45 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/iso-codes -rw-r--r-- 1 root root 471 2008-11-14 15:29 ./source/l/iso-codes/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/jasper -rw-r--r-- 1 root root 958519 2009-04-03 00:58 ./source/l/jasper/jasper-1.900.1.tar.bz2 --rwxr-xr-x 1 root root 3101 2009-06-09 00:59 ./source/l/jasper/jasper.SlackBuild +-rwxr-xr-x 1 root root 3513 2010-02-11 20:18 ./source/l/jasper/jasper.SlackBuild -rw-r--r-- 1 root root 839 2007-09-16 15:27 ./source/l/jasper/slack-desc -drwxr-xr-x 3 root root 4096 2009-08-13 21:39 ./source/l/jre --rw-r--r-- 1 root root 3767 2009-07-02 22:52 ./source/l/jre/COPYRIGHT --rw-r--r-- 1 root root 12720 2009-07-02 22:52 ./source/l/jre/LICENSE --rw-r--r-- 1 root root 15906 2009-07-02 22:52 ./source/l/jre/README --rw-r--r-- 1 root root 249556 2009-07-02 22:52 ./source/l/jre/THIRDPARTYLICENSEREADME.txt --rw-r--r-- 1 root root 968 2009-07-02 22:52 ./source/l/jre/Welcome.html --rw-r--r-- 1 root root 20271039 2009-08-13 20:26 ./source/l/jre/jre-6u16-linux-x64.bin --rwxr-xr-x 1 root root 4240 2009-08-13 21:14 ./source/l/jre/jre.SlackBuild +drwxr-xr-x 3 root root 4096 2010-05-09 01:13 ./source/l/jre +-rw-r--r-- 1 root root 3767 2010-04-12 21:23 ./source/l/jre/COPYRIGHT +-rw-r--r-- 1 root root 12720 2010-04-12 21:23 ./source/l/jre/LICENSE +-rw-r--r-- 1 root root 15906 2010-04-12 21:23 ./source/l/jre/README +-rw-r--r-- 1 root root 183173 2010-04-12 21:23 ./source/l/jre/THIRDPARTYLICENSEREADME.txt +-rw-r--r-- 1 root root 968 2010-04-12 21:23 ./source/l/jre/Welcome.html +-rw-r--r-- 1 root root 20469462 2010-05-08 22:27 ./source/l/jre/jre-6u20-linux-x64.bin +-rwxr-xr-x 1 root root 4246 2010-05-09 01:13 ./source/l/jre/jre.SlackBuild drwxr-xr-x 2 root root 4096 2009-04-29 19:47 ./source/l/jre/profile.d -rwxr-xr-x 1 root root 122 2009-04-29 17:28 ./source/l/jre/profile.d/jre.csh -rwxr-xr-x 1 root root 125 2009-04-29 17:29 ./source/l/jre/profile.d/jre.sh --rw-r--r-- 1 root root 1007 2009-08-13 21:13 ./source/l/jre/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/lcms --rw-r--r-- 1 root root 714402 2009-03-22 17:18 ./source/l/lcms/lcms-1.18.tar.bz2 --rwxr-xr-x 1 root root 2581 2009-05-19 20:05 ./source/l/lcms/lcms.SlackBuild +-rw-r--r-- 1 root root 1007 2010-05-09 01:13 ./source/l/jre/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-20 05:51 ./source/l/lcms +-rw-r--r-- 1 root root 608880 2009-10-30 15:57 ./source/l/lcms/lcms-1.19.tar.xz +-rwxr-xr-x 1 root root 3261 2010-02-20 05:52 ./source/l/lcms/lcms.SlackBuild -rw-r--r-- 1 root root 665 2004-02-22 08:32 ./source/l/lcms/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 02:22 ./source/l/lesstif +drwxr-xr-x 2 root root 4096 2010-04-19 20:00 ./source/l/lesstif -rw-r--r-- 1 root root 210 2007-02-07 06:18 ./source/l/lesstif/doinst.sh.gz --rw-r--r-- 1 root root 2459799 2006-06-10 09:43 ./source/l/lesstif/lesstif-0.95.0.tar.bz2 +-rw-r--r-- 1 root root 1821464 2009-05-27 14:10 ./source/l/lesstif/lesstif-0.95.2.tar.xz -rw-r--r-- 1 root root 507 2008-10-21 20:43 ./source/l/lesstif/lesstif.Makefile.in.patch.gz -rw-r--r-- 1 root root 737 2008-10-21 20:30 ./source/l/lesstif/lesstif.PutPixel32.patch.gz --rwxr-xr-x 1 root root 4189 2009-06-09 05:52 ./source/l/lesstif/lesstif.SlackBuild --rw-r--r-- 1 root root 323 2009-03-16 20:29 ./source/l/lesstif/lesstif.gcc42.diff.gz +-rwxr-xr-x 1 root root 4824 2010-04-19 20:12 ./source/l/lesstif/lesstif.SlackBuild -rw-r--r-- 1 root root 267 2009-03-23 21:35 ./source/l/lesstif/lesstif.rendertable.check.diff.gz -rw-r--r-- 1 root root 588 2008-10-17 20:29 ./source/l/lesstif/lesstif.x86_64.patch.gz -rw-r--r-- 1 root root 984 2002-03-23 23:35 ./source/l/lesstif/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libaio --rw-r--r-- 1 root root 50659 2006-01-04 16:03 ./source/l/libaio/libaio-0.3.106.tar.gz --rwxr-xr-x 1 root root 3140 2009-05-19 20:05 ./source/l/libaio/libaio.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-11 01:12 ./source/l/libaio +-rw-r--r-- 1 root root 43579 2009-10-09 21:15 ./source/l/libaio/libaio-0.3.109.tar.bz2 +-rw-r--r-- 1 root root 248 2009-10-09 21:15 ./source/l/libaio/libaio-0.3.109.tar.sign +-rwxr-xr-x 1 root root 3782 2010-05-11 01:13 ./source/l/libaio/libaio.SlackBuild -rw-r--r-- 1 root root 962 2008-04-10 03:50 ./source/l/libaio/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libao -rw-r--r-- 1 root root 405619 2007-05-24 11:20 ./source/l/libao/libao-0.8.8.tar.gz -rwxr-xr-x 1 root root 2356 2009-05-19 20:05 ./source/l/libao/libao.SlackBuild -rw-r--r-- 1 root root 884 2003-12-19 00:27 ./source/l/libao/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libarchive --rw-r--r-- 1 root root 701559 2009-03-07 18:00 ./source/l/libarchive/libarchive-2.6.2.tar.bz2 --rwxr-xr-x 1 root root 2851 2009-05-19 20:05 ./source/l/libarchive/libarchive.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-06 19:40 ./source/l/libarchive +-rw-r--r-- 1 root root 952796 2010-02-05 05:01 ./source/l/libarchive/libarchive-2.8.0.tar.xz +-rwxr-xr-x 1 root root 3245 2010-03-06 19:41 ./source/l/libarchive/libarchive.SlackBuild -rw-r--r-- 1 root root 145 2008-07-24 14:59 ./source/l/libarchive/libarchive.info -rw-r--r-- 1 root root 872 2009-03-07 18:02 ./source/l/libarchive/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libart_lgpl @@ -6143,12 +6465,12 @@ drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/libcaca -rw-r--r-- 1 root root 750005 2008-10-18 12:58 ./source/l/libcaca/libcaca-0.99.beta16.tar.bz2 -rwxr-xr-x 1 root root 3330 2009-06-09 01:21 ./source/l/libcaca/libcaca.SlackBuild -rw-r--r-- 1 root root 817 2004-04-20 23:03 ./source/l/libcaca/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libcap +drwxr-xr-x 2 root root 4096 2010-05-05 05:54 ./source/l/libcap -rw-r--r-- 1 root root 553 2008-10-30 18:03 ./source/l/libcap/README.SLACKWARE -rw-r--r-- 1 root root 11907 2008-03-29 00:07 ./source/l/libcap/capfaq-0.2.txt --rw-r--r-- 1 root root 48451 2008-12-04 07:07 ./source/l/libcap/libcap-2.16.tar.bz2 --rw-r--r-- 1 root root 248 2008-12-04 07:07 ./source/l/libcap/libcap-2.16.tar.bz2.sign --rwxr-xr-x 1 root root 3399 2009-05-19 20:05 ./source/l/libcap/libcap.SlackBuild +-rw-r--r-- 1 root root 53099 2010-01-14 02:09 ./source/l/libcap/libcap-2.19.tar.bz2 +-rw-r--r-- 1 root root 248 2010-01-14 02:09 ./source/l/libcap/libcap-2.19.tar.bz2.sign +-rwxr-xr-x 1 root root 3957 2010-05-05 05:58 ./source/l/libcap/libcap.SlackBuild -rw-r--r-- 1 root root 194 2009-04-11 18:20 ./source/l/libcap/libcap.capability.h.fix.broken.includes.diff.gz -rw-r--r-- 1 root root 837 2008-10-30 18:03 ./source/l/libcap/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libcddb @@ -6157,37 +6479,37 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libcddb -rw-r--r-- 1 root root 786 2008-03-10 09:31 ./source/l/libcddb/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/libcdio -rw-r--r-- 1 root root 1308090 2007-10-27 05:07 ./source/l/libcdio/libcdio-0.79.tar.bz2 --rwxr-xr-x 1 root root 3300 2009-05-23 00:41 ./source/l/libcdio/libcdio.SlackBuild +-rwxr-xr-x 1 root root 3300 2010-03-11 20:01 ./source/l/libcdio/libcdio.SlackBuild -rw-r--r-- 1 root root 1012 2008-03-10 09:14 ./source/l/libcdio/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/libdiscid +-rw-r--r-- 1 root root 347907 2008-08-06 19:46 ./source/l/libdiscid/libdiscid-0.2.2.tar.gz +-rwxr-xr-x 1 root root 3431 2010-04-30 21:49 ./source/l/libdiscid/libdiscid.SlackBuild +-rw-r--r-- 1 root root 940 2010-05-04 00:19 ./source/l/libdiscid/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libdvdread -rw-r--r-- 1 root root 96899 2008-09-07 14:22 ./source/l/libdvdread/libdvdread-4.1.3.tar.bz2 -rwxr-xr-x 1 root root 2533 2009-05-19 20:05 ./source/l/libdvdread/libdvdread.SlackBuild -rw-r--r-- 1 root root 858 2009-03-08 00:28 ./source/l/libdvdread/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libexif --rw-r--r-- 1 root root 691528 2007-06-12 14:06 ./source/l/libexif/libexif-0.6.16.tar.bz2 --rwxr-xr-x 1 root root 2648 2009-05-19 20:05 ./source/l/libexif/libexif.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-07 23:27 ./source/l/libexif +-rw-r--r-- 1 root root 768076 2010-02-07 23:26 ./source/l/libexif/libexif-0.6.19.tar.xz +-rwxr-xr-x 1 root root 3336 2010-02-07 23:28 ./source/l/libexif/libexif.SlackBuild -rw-r--r-- 1 root root 190 2007-05-28 17:50 ./source/l/libexif/libexif.pc.diff.gz -rw-r--r-- 1 root root 855 2008-02-11 03:44 ./source/l/libexif/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libglade -rw-r--r-- 1 root root 356119 2009-03-23 15:10 ./source/l/libglade/libglade-2.6.4.tar.bz2 --rwxr-xr-x 1 root root 2769 2009-06-09 05:43 ./source/l/libglade/libglade.SlackBuild +-rwxr-xr-x 1 root root 3575 2010-04-25 20:44 ./source/l/libglade/libglade.SlackBuild -rw-r--r-- 1 root root 808 2008-02-11 03:44 ./source/l/libglade/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 19:16 ./source/l/libgphoto2 --rw-r--r-- 1 root root 4220396 2009-05-17 20:44 ./source/l/libgphoto2/libgphoto2-2.4.6.tar.xz --rwxr-xr-x 1 root root 5002 2009-06-09 19:17 ./source/l/libgphoto2/libgphoto2.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-16 20:42 ./source/l/libgphoto2 +-rw-r--r-- 1 root root 4542028 2010-04-11 13:47 ./source/l/libgphoto2/libgphoto2-2.4.9.tar.xz +-rwxr-xr-x 1 root root 5521 2010-02-14 22:52 ./source/l/libgphoto2/libgphoto2.SlackBuild -rw-r--r-- 1 root root 749 2008-04-27 02:39 ./source/l/libgphoto2/slack-desc drwxr-xr-x 2 root root 4096 2009-06-07 20:31 ./source/l/libgpod -rw-r--r-- 1 root root 594656 2009-04-15 21:41 ./source/l/libgpod/libgpod-0.7.2.tar.xz -rwxr-xr-x 1 root root 3542 2009-06-07 20:32 ./source/l/libgpod/libgpod.SlackBuild -rw-r--r-- 1 root root 976 2006-09-06 23:53 ./source/l/libgpod/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-13 16:59 ./source/l/libgsf --rw-r--r-- 1 root root 589878 2009-06-20 15:14 ./source/l/libgsf/libgsf-1.14.15.tar.bz2 --rwxr-xr-x 1 root root 3285 2009-07-13 17:15 ./source/l/libgsf/libgsf.SlackBuild +drwxr-xr-x 2 root root 4096 2009-10-28 19:37 ./source/l/libgsf +-rw-r--r-- 1 root root 599091 2009-10-28 19:35 ./source/l/libgsf/libgsf-1.14.16.tar.bz2 +-rwxr-xr-x 1 root root 3953 2010-02-07 03:26 ./source/l/libgsf/libgsf.SlackBuild -rw-r--r-- 1 root root 793 2006-04-15 21:17 ./source/l/libgsf/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libgtkhtml --rw-r--r-- 1 root root 597923 2007-08-14 00:20 ./source/l/libgtkhtml/libgtkhtml-2.11.1.tar.bz2 --rwxr-xr-x 1 root root 3316 2009-06-09 00:49 ./source/l/libgtkhtml/libgtkhtml.SlackBuild --rw-r--r-- 1 root root 801 2008-02-11 03:44 ./source/l/libgtkhtml/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libical -rw-r--r-- 1 root root 438 2008-11-02 11:50 ./source/l/libical/README -rw-r--r-- 1 root root 759128 2009-01-12 03:01 ./source/l/libical/libical-0.43.tar.bz2 @@ -6212,16 +6534,22 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libieee1284 -rw-r--r-- 1 root root 278804 2007-09-18 10:03 ./source/l/libieee1284/libieee1284-0.2.11.tar.bz2 -rwxr-xr-x 1 root root 3222 2009-05-19 20:05 ./source/l/libieee1284/libieee1284.SlackBuild -rw-r--r-- 1 root root 842 2008-02-11 03:44 ./source/l/libieee1284/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libjpeg --rw-r--r-- 1 root root 439 2006-12-11 21:45 ./source/l/libjpeg/_libjpeg.tar.gz --rw-r--r-- 1 root root 943 1999-03-12 19:50 ./source/l/libjpeg/jpeg-6b.diff.gz --rw-r--r-- 1 root root 613261 1998-03-27 22:46 ./source/l/libjpeg/jpegsrc.v6b.tar.gz --rwxr-xr-x 1 root root 3085 2009-05-19 20:05 ./source/l/libjpeg/libjpeg.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-04 00:44 ./source/l/libiodbc +-rw-r--r-- 1 root root 658548 2009-12-24 21:16 ./source/l/libiodbc/libiodbc-3.52.7.tar.xz +-rwxr-xr-x 1 root root 3649 2010-05-04 00:44 ./source/l/libiodbc/libiodbc.SlackBuild +-rw-r--r-- 1 root root 896 2009-12-24 21:39 ./source/l/libiodbc/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-05 02:32 ./source/l/libjpeg +-rw-r--r-- 1 root root 648772 2010-02-28 10:24 ./source/l/libjpeg/jpegsrc.v8a.tar.xz +-rwxr-xr-x 1 root root 3238 2010-04-05 02:34 ./source/l/libjpeg/libjpeg.SlackBuild -rw-r--r-- 1 root root 1120 2002-03-23 23:37 ./source/l/libjpeg/slack-desc drwxr-xr-x 2 root root 4096 2009-06-07 20:28 ./source/l/libkarma -rw-r--r-- 1 root root 81330 2009-06-06 18:10 ./source/l/libkarma/libkarma-0.1.1.tar.gz -rwxr-xr-x 1 root root 3275 2009-06-07 20:28 ./source/l/libkarma/libkarma.SlackBuild -rw-r--r-- 1 root root 816 2007-02-15 18:44 ./source/l/libkarma/slack-desc +drwxr-xr-x 2 root root 4096 2009-12-19 00:05 ./source/l/liblastfm +-rw-r--r-- 1 root root 92957 2009-10-07 02:59 ./source/l/liblastfm/liblastfm-0.3.0.tar.bz2 +-rwxr-xr-x 1 root root 2712 2009-12-19 00:05 ./source/l/liblastfm/liblastfm.SlackBuild +-rw-r--r-- 1 root root 663 2009-10-07 02:58 ./source/l/liblastfm/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libmad -rw-r--r-- 1 root root 502379 2004-02-17 03:55 ./source/l/libmad/libmad-0.15.1b.tar.gz -rw-r--r-- 1 root root 189 2004-02-18 03:17 ./source/l/libmad/libmad-0.15.1b.tar.gz.sign @@ -6236,22 +6564,22 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libmcs -rw-r--r-- 1 root root 91540 2008-04-20 22:06 ./source/l/libmcs/libmcs-0.7.1.tar.bz2 -rwxr-xr-x 1 root root 3314 2009-05-19 20:05 ./source/l/libmcs/libmcs.SlackBuild -rw-r--r-- 1 root root 966 2008-02-27 02:02 ./source/l/libmcs/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libmng --rw-r--r-- 1 root root 852635 2007-07-13 13:23 ./source/l/libmng/libmng-1.0.10.tar.bz2 --rwxr-xr-x 1 root root 3379 2009-05-19 20:05 ./source/l/libmng/libmng.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-14 23:25 ./source/l/libmng +-rw-r--r-- 1 root root 737812 2007-07-13 13:23 ./source/l/libmng/libmng-1.0.10.tar.xz +-rwxr-xr-x 1 root root 3759 2010-02-14 23:25 ./source/l/libmng/libmng.SlackBuild -rw-r--r-- 1 root root 941 2003-08-04 20:41 ./source/l/libmng/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libmowgli -rw-r--r-- 1 root root 92904 2007-12-27 23:15 ./source/l/libmowgli/libmowgli-0.6.0.tar.bz2 -rwxr-xr-x 1 root root 3529 2009-05-19 20:05 ./source/l/libmowgli/libmowgli.SlackBuild -rw-r--r-- 1 root root 859 2008-01-30 06:50 ./source/l/libmowgli/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libmsn --rw-r--r-- 1 root root 99750 2009-04-30 19:04 ./source/l/libmsn/libmsn-r96.tar.bz2 --rwxr-xr-x 1 root root 2613 2009-05-19 20:05 ./source/l/libmsn/libmsn.SlackBuild --rw-r--r-- 1 root root 771 2009-01-23 08:14 ./source/l/libmsn/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-07 20:30 ./source/l/libmtp --rw-r--r-- 1 root root 364192 2009-01-22 00:03 ./source/l/libmtp/libmtp-0.3.6.tar.xz --rwxr-xr-x 1 root root 3639 2009-06-07 22:23 ./source/l/libmtp/libmtp.SlackBuild --rw-r--r-- 1 root root 1056 2006-09-07 03:50 ./source/l/libmtp/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/libmsn +-rw-r--r-- 1 root root 289614 2010-03-24 11:18 ./source/l/libmsn/libmsn-4.1.tar.bz2 +-rwxr-xr-x 1 root root 2927 2010-03-24 11:18 ./source/l/libmsn/libmsn.SlackBuild +-rw-r--r-- 1 root root 771 2010-05-04 00:20 ./source/l/libmsn/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-03 18:40 ./source/l/libmtp +-rw-r--r-- 1 root root 408544 2009-09-12 06:41 ./source/l/libmtp/libmtp-1.0.1.tar.xz +-rwxr-xr-x 1 root root 4318 2010-05-03 18:41 ./source/l/libmtp/libmtp.SlackBuild +-rw-r--r-- 1 root root 1059 2010-05-03 18:39 ./source/l/libmtp/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/libnjb -rw-r--r-- 1 root root 1674 2007-10-26 01:41 ./source/l/libnjb/80-libnjb.rules -rw-r--r-- 1 root root 404914 2007-09-05 21:38 ./source/l/libnjb/libnjb-2.2.6.tar.bz2 @@ -6263,33 +6591,41 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libnl -rwxr-xr-x 1 root root 2778 2009-05-19 20:05 ./source/l/libnl/libnl.SlackBuild -rw-r--r-- 1 root root 112 2009-02-23 00:22 ./source/l/libnl/libnl.info -rw-r--r-- 1 root root 786 2008-06-08 22:23 ./source/l/libnl/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libogg --rw-r--r-- 1 root root 296780 2005-11-28 04:30 ./source/l/libogg/libogg-1.1.3.tar.bz2 --rwxr-xr-x 1 root root 2448 2009-05-19 20:05 ./source/l/libogg/libogg.SlackBuild +drwxr-xr-x 2 root root 4096 2010-01-21 22:41 ./source/l/libnotify +-rw-r--r-- 1 root root 242600 2008-11-20 11:22 ./source/l/libnotify/libnotify-0.4.5.tar.xz +-rwxr-xr-x 1 root root 2768 2010-02-12 19:52 ./source/l/libnotify/libnotify.SlackBuild +-rw-r--r-- 1 root root 707 2009-05-31 20:27 ./source/l/libnotify/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-06 21:32 ./source/l/libogg +-rw-r--r-- 1 root root 257988 2009-06-23 16:12 ./source/l/libogg/libogg-1.1.4.tar.xz +-rwxr-xr-x 1 root root 2841 2010-02-06 21:40 ./source/l/libogg/libogg.SlackBuild -rw-r--r-- 1 root root 762 2003-12-19 00:28 ./source/l/libogg/slack-desc drwxr-xr-x 2 root root 4096 2009-06-02 22:03 ./source/l/liboil -rw-r--r-- 1 root root 481104 2009-03-19 21:12 ./source/l/liboil/liboil-0.3.16.tar.xz -rwxr-xr-x 1 root root 2857 2009-06-02 22:10 ./source/l/liboil/liboil.SlackBuild -rw-r--r-- 1 root root 1033 2008-08-01 05:06 ./source/l/liboil/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-19 21:51 ./source/l/libpng --rw-r--r-- 1 root root 660314 2009-06-04 11:08 ./source/l/libpng/libpng-1.2.37.tar.bz2 --rwxr-xr-x 1 root root 3094 2009-06-19 21:51 ./source/l/libpng/libpng.SlackBuild --rw-r--r-- 1 root root 315 2006-08-27 02:23 ./source/l/libpng/libpng.libs.diff.gz +drwxr-xr-x 2 root root 4096 2010-05-08 03:24 ./source/l/libpng +-rw-r--r-- 1 root root 538832 2010-02-25 11:56 ./source/l/libpng/libpng-1.2.43.tar.xz +-rw-r--r-- 1 root root 527736 2010-05-06 10:30 ./source/l/libpng/libpng-1.4.2.tar.xz +-rwxr-xr-x 1 root root 4389 2010-05-08 03:25 ./source/l/libpng/libpng.SlackBuild -rw-r--r-- 1 root root 949 2002-03-23 23:42 ./source/l/libpng/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libraw1394 +drwxr-xr-x 2 root root 4096 2010-05-11 01:16 ./source/l/libraw1394 -rw-r--r-- 1 root root 191 2007-12-09 17:25 ./source/l/libraw1394/README --rw-r--r-- 1 root root 283790 2008-07-18 07:46 ./source/l/libraw1394/libraw1394-2.0.0.tar.bz2 --rwxr-xr-x 1 root root 2919 2009-05-19 20:05 ./source/l/libraw1394/libraw1394.SlackBuild --rw-r--r-- 1 root root 161 2008-01-08 04:18 ./source/l/libraw1394/libraw1394.info --rw-r--r-- 1 root root 786 2008-08-01 05:09 ./source/l/libraw1394/slack-desc +-rw-r--r-- 1 root root 320413 2009-12-27 01:09 ./source/l/libraw1394/libraw1394-2.0.5.tar.bz2 +-rw-r--r-- 1 root root 248 2009-12-27 01:09 ./source/l/libraw1394/libraw1394-2.0.5.tar.sign +-rwxr-xr-x 1 root root 3633 2010-05-11 01:18 ./source/l/libraw1394/libraw1394.SlackBuild +-rw-r--r-- 1 root root 807 2010-05-11 01:16 ./source/l/libraw1394/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/librsvg -rw-r--r-- 1 root root 477499 2009-03-16 19:26 ./source/l/librsvg/librsvg-2.26.0.tar.bz2 --rwxr-xr-x 1 root root 2945 2009-06-09 00:47 ./source/l/librsvg/librsvg.SlackBuild +-rwxr-xr-x 1 root root 3632 2010-02-12 21:37 ./source/l/librsvg/librsvg.SlackBuild -rw-r--r-- 1 root root 361 2008-10-05 22:10 ./source/l/librsvg/librsvg_seamonkey-config.diff.gz -rw-r--r-- 1 root root 632 2008-02-11 03:44 ./source/l/librsvg/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libspectre --rw-r--r-- 1 root root 273283 2008-11-25 16:25 ./source/l/libspectre/libspectre-0.2.2.tar.bz2 --rwxr-xr-x 1 root root 2989 2009-05-19 20:05 ./source/l/libspectre/libspectre.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-17 01:34 ./source/l/libsamplerate +-rw-r--r-- 1 root root 3268548 2009-02-14 11:56 ./source/l/libsamplerate/libsamplerate-0.1.7.tar.xz +-rwxr-xr-x 1 root root 1804 2009-12-17 03:03 ./source/l/libsamplerate/libsamplerate.SlackBuild +-rw-r--r-- 1 root root 1117 2009-12-17 01:20 ./source/l/libsamplerate/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/libspectre +-rw-r--r-- 1 root root 262053 2010-04-21 10:03 ./source/l/libspectre/libspectre-0.2.5.tar.bz2 +-rwxr-xr-x 1 root root 3317 2010-04-20 20:15 ./source/l/libspectre/libspectre.SlackBuild -rw-r--r-- 1 root root 870 2008-10-09 06:04 ./source/l/libspectre/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 02:22 ./source/l/libtermcap -rwxr-xr-x 1 root root 2588 2009-05-19 20:05 ./source/l/libtermcap/libtermcap.SlackBuild @@ -6299,24 +6635,19 @@ drwxr-xr-x 2 root root 4096 2009-05-23 02:22 ./source/l/libtermcap -rw-r--r-- 1 root root 552156 2000-02-04 13:21 ./source/l/libtermcap/termcap-compat_1.2.3.tar.gz -rw-r--r-- 1 root root 233 2003-01-03 22:22 ./source/l/libtermcap/termcap.bufsize.diff.gz -rw-r--r-- 1 root root 365 2000-05-10 02:26 ./source/l/libtermcap/termcap.h.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libtheora --rw-r--r-- 1 root root 1652987 2008-11-03 18:54 ./source/l/libtheora/libtheora-1.0.tar.bz2 --rwxr-xr-x 1 root root 3400 2009-05-19 20:05 ./source/l/libtheora/libtheora.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-17 23:32 ./source/l/libtheora +-rw-r--r-- 1 root root 1434496 2010-01-25 14:33 ./source/l/libtheora/libtheora-1.1.1.tar.xz +-rwxr-xr-x 1 root root 3783 2010-02-17 23:33 ./source/l/libtheora/libtheora.SlackBuild -rw-r--r-- 1 root root 1085 2006-09-16 06:01 ./source/l/libtheora/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libtiff --rwxr-xr-x 1 root root 3066 2009-05-19 20:05 ./source/l/libtiff/libtiff.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-07 22:03 ./source/l/libtiff +-rwxr-xr-x 1 root root 3727 2010-02-07 22:09 ./source/l/libtiff/libtiff.SlackBuild -rw-r--r-- 1 root root 852 2004-10-28 01:28 ./source/l/libtiff/slack-desc --rw-r--r-- 1 root root 6121 2006-08-18 03:03 ./source/l/libtiff/tiff-3.8.2.goo-sec.diff.gz --rw-r--r-- 1 root root 1095544 2006-03-23 15:15 ./source/l/libtiff/tiff-3.8.2.tar.bz2 --rw-r--r-- 1 root root 423 2006-08-18 03:03 ./source/l/libtiff/tiff-3.8.2.tiffsplit.commandline.overflow.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libungif --rw-r--r-- 1 root root 482222 2005-10-19 05:43 ./source/l/libungif/libungif-4.1.4.tar.bz2 --rwxr-xr-x 1 root root 2922 2009-05-19 20:05 ./source/l/libungif/libungif.SlackBuild --rw-r--r-- 1 root root 800 2006-04-16 00:12 ./source/l/libungif/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libusb --rw-r--r-- 1 root root 389343 2006-03-04 04:49 ./source/l/libusb/libusb-0.1.12.tar.gz --rwxr-xr-x 1 root root 3061 2009-05-19 20:05 ./source/l/libusb/libusb.SlackBuild --rw-r--r-- 1 root root 703 2003-01-10 20:30 ./source/l/libusb/slack-desc +-rw-r--r-- 1 root root 926148 2009-11-04 17:32 ./source/l/libtiff/tiff-3.9.2.tar.xz +drwxr-xr-x 2 root root 4096 2009-12-01 05:09 ./source/l/libusb +-rw-r--r-- 1 root root 322956 2009-12-01 04:56 ./source/l/libusb/libusb-1.0.6.tar.bz2 +-rw-r--r-- 1 root root 251218 2009-12-01 05:01 ./source/l/libusb/libusb-compat-0.1.3.tar.bz2 +-rwxr-xr-x 1 root root 5051 2010-02-06 21:51 ./source/l/libusb/libusb.SlackBuild +-rw-r--r-- 1 root root 844 2009-12-01 05:10 ./source/l/libusb/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libvisual drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libvisual-plugins -rw-r--r-- 1 root root 575514 2006-03-20 21:09 ./source/l/libvisual-plugins/libvisual-plugins-0.4.0.tar.bz2 @@ -6328,43 +6659,53 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libvisual-plugins -rw-r--r-- 1 root root 1004 2006-08-23 20:17 ./source/l/libvisual/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libvncserver -rw-r--r-- 1 root root 797659 2009-01-31 04:21 ./source/l/libvncserver/LibVNCServer-0.9.7.tar.bz2 --rwxr-xr-x 1 root root 2862 2009-05-19 20:05 ./source/l/libvncserver/libvncserver.SlackBuild +-rwxr-xr-x 1 root root 3473 2010-02-15 01:27 ./source/l/libvncserver/libvncserver.SlackBuild -rw-r--r-- 1 root root 211 2008-01-08 04:53 ./source/l/libvncserver/libvncserver.info -rw-r--r-- 1 root root 830 2008-08-01 05:11 ./source/l/libvncserver/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libvorbis --rw-r--r-- 1 root root 1214374 2007-07-25 16:52 ./source/l/libvorbis/libvorbis-1.2.0.tar.bz2 --rwxr-xr-x 1 root root 2473 2009-05-19 20:05 ./source/l/libvorbis/libvorbis.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-03 21:30 ./source/l/libvorbis +-rw-r--r-- 1 root root 948352 2009-12-02 21:53 ./source/l/libvorbis/libvorbis-1.2.3.tar.xz +-rwxr-xr-x 1 root root 2883 2010-02-06 03:12 ./source/l/libvorbis/libvorbis.SlackBuild -rw-r--r-- 1 root root 1020 2003-12-18 23:44 ./source/l/libvorbis/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libwmf --rw-r--r-- 1 root root 1515265 2006-06-14 06:20 ./source/l/libwmf/libwmf-0.2.8.4.tar.bz2 --rwxr-xr-x 1 root root 2762 2009-06-09 02:26 ./source/l/libwmf/libwmf.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-15 00:24 ./source/l/libwmf +-rw-r--r-- 1 root root 1271924 2006-06-14 06:20 ./source/l/libwmf/libwmf-0.2.8.4.tar.xz +-rwxr-xr-x 1 root root 3438 2010-02-15 00:24 ./source/l/libwmf/libwmf.SlackBuild +-rw-r--r-- 1 root root 340 2010-02-15 00:24 ./source/l/libwmf/libwmf.png14.diff.gz -rw-r--r-- 1 root root 745 2003-12-15 20:23 ./source/l/libwmf/slack-desc -rw-r--r-- 1 root root 767 2003-12-15 20:29 ./source/l/libwmf/slack-desc-docs -drwxr-xr-x 2 root root 4096 2009-06-09 02:16 ./source/l/libwnck --rw-r--r-- 1 root root 711253 2009-04-14 00:07 ./source/l/libwnck/libwnck-2.26.1.tar.bz2 --rwxr-xr-x 1 root root 2892 2009-06-09 02:16 ./source/l/libwnck/libwnck.SlackBuild +drwxr-xr-x 2 root root 4096 2009-11-30 14:10 ./source/l/libwnck +-rw-r--r-- 1 root root 712289 2009-11-30 14:10 ./source/l/libwnck/libwnck-2.28.0.tar.bz2 +-rwxr-xr-x 1 root root 3580 2010-02-10 21:11 ./source/l/libwnck/libwnck.SlackBuild -rw-r--r-- 1 root root 933 2007-09-15 21:46 ./source/l/libwnck/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libwpd -rw-r--r-- 1 root root 424176 2008-02-12 13:46 ./source/l/libwpd/libwpd-0.8.14.tar.bz2 -rwxr-xr-x 1 root root 2617 2009-05-19 20:05 ./source/l/libwpd/libwpd.SlackBuild -rw-r--r-- 1 root root 773 2006-04-15 21:37 ./source/l/libwpd/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libxklavier --rw-r--r-- 1 root root 339409 2009-03-18 22:09 ./source/l/libxklavier/libxklavier-3.9.tar.bz2 --rwxr-xr-x 1 root root 2787 2009-06-09 02:19 ./source/l/libxklavier/libxklavier.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-12 00:22 ./source/l/libxklavier +-rw-r--r-- 1 root root 357862 2010-01-11 12:02 ./source/l/libxklavier/libxklavier-5.0.tar.bz2 +-rwxr-xr-x 1 root root 3475 2010-02-12 00:23 ./source/l/libxklavier/libxklavier.SlackBuild -rw-r--r-- 1 root root 748 2008-08-01 05:15 ./source/l/libxklavier/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libxml2 --rw-r--r-- 1 root root 2631584 2009-01-18 21:43 ./source/l/libxml2/libxml2-2.7.3.tar.xz --rwxr-xr-x 1 root root 3081 2009-05-19 20:05 ./source/l/libxml2/libxml2.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-05 22:06 ./source/l/libxml2 +-rw-r--r-- 1 root root 2710700 2009-10-06 16:42 ./source/l/libxml2/libxml2-2.7.6.tar.xz +-rwxr-xr-x 1 root root 3350 2009-12-05 22:07 ./source/l/libxml2/libxml2.SlackBuild -rw-r--r-- 1 root root 980 2008-01-08 23:42 ./source/l/libxml2/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/libxslt --rw-r--r-- 1 root root 2298341 2008-05-13 15:54 ./source/l/libxslt/libxslt-1.1.24.tar.bz2 --rwxr-xr-x 1 root root 2809 2009-05-19 20:05 ./source/l/libxslt/libxslt.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-05 22:12 ./source/l/libxslt +-rw-r--r-- 1 root root 1666032 2009-09-24 14:45 ./source/l/libxslt/libxslt-1.1.26.tar.xz +-rwxr-xr-x 1 root root 3078 2009-12-05 22:13 ./source/l/libxslt/libxslt.SlackBuild -rw-r--r-- 1 root root 678 2005-03-26 23:49 ./source/l/libxslt/slack-desc drwxr-xr-x 2 root root 4096 2009-08-16 22:11 ./source/l/libzip -rw-r--r-- 1 root root 307116 2008-07-25 10:49 ./source/l/libzip/libzip-0.9.tar.bz2 -rwxr-xr-x 1 root root 3467 2009-08-16 22:11 ./source/l/libzip/libzip.SlackBuild -rw-r--r-- 1 root root 163 2008-01-08 04:45 ./source/l/libzip/libzip.info -rw-r--r-- 1 root root 882 2008-08-01 05:16 ./source/l/libzip/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-10 20:51 ./source/l/loudmouth +-rw-r--r-- 1 root root 301420 2008-10-29 21:05 ./source/l/loudmouth/loudmouth-1.4.3.tar.xz +-rwxr-xr-x 1 root root 4357 2010-04-10 20:52 ./source/l/loudmouth/loudmouth.SlackBuild +-rw-r--r-- 1 root root 403 2008-11-29 00:35 ./source/l/loudmouth/loudmouth.async_assertion.diff.gz +-rw-r--r-- 1 root root 272 2009-11-03 22:57 ./source/l/loudmouth/loudmouth.crtpath.diff.gz +-rw-r--r-- 1 root root 399 2010-04-10 20:42 ./source/l/loudmouth/loudmouth.gnutls.configure.ac.diff.gz +-rw-r--r-- 1 root root 429 2009-06-13 21:28 ./source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff.gz +-rw-r--r-- 1 root root 777 2009-11-16 01:46 ./source/l/loudmouth/loudmouth.stanzadrop.diff.gz +-rw-r--r-- 1 root root 900 2010-04-10 20:56 ./source/l/loudmouth/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/lzo -rw-r--r-- 1 root root 280 2006-12-11 19:07 ./source/l/lzo/.lzo.info -rw-r--r-- 1 root root 599387 2005-10-17 16:10 ./source/l/lzo/lzo-2.02.tar.gz @@ -6378,10 +6719,13 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/mm -rw-r--r-- 1 root root 248658 2006-08-15 07:05 ./source/l/mm/mm-1.4.2.tar.bz2 -rwxr-xr-x 1 root root 3497 2009-05-19 20:05 ./source/l/mm/mm.SlackBuild -rw-r--r-- 1 root root 1003 2006-08-10 00:38 ./source/l/mm/slack-desc -drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/l/mpfr --rw-r--r-- 1 root root 888921 2008-01-29 08:51 ./source/l/mpfr/mpfr-2.3.1.tar.bz2 --rwxr-xr-x 1 root root 2844 2009-05-19 20:05 ./source/l/mpfr/mpfr.SlackBuild -drwxr-xr-x 2 root root 4096 2008-02-27 02:13 ./source/l/mpfr/patches +drwxr-xr-x 3 root root 4096 2010-02-24 02:32 ./source/l/mpfr +-rw-r--r-- 1 root root 951620 2009-11-30 12:29 ./source/l/mpfr/mpfr-2.4.2.tar.xz +-rwxr-xr-x 1 root root 3270 2010-02-24 02:35 ./source/l/mpfr/mpfr.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-24 02:31 ./source/l/mpfr/patches +-rw-r--r-- 1 root root 1816 2009-12-07 14:11 ./source/l/mpfr/patches/patch01.gz +-rw-r--r-- 1 root root 800 2009-12-18 12:25 ./source/l/mpfr/patches/patch02.gz +-rw-r--r-- 1 root root 765 2010-01-11 16:24 ./source/l/mpfr/patches/patch03.gz -rw-r--r-- 1 root root 1042 2006-05-08 19:39 ./source/l/mpfr/slack-desc drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/l/ncurses -rw-r--r-- 1 root root 5711 2002-10-08 13:32 ./source/l/ncurses/Eterm.ti @@ -6394,91 +6738,106 @@ drwxr-xr-x 2 root root 4096 2009-02-21 23:09 ./source/l/ncurses/patches -rw-r--r-- 1 root root 3709 2003-07-21 15:33 ./source/l/ncurses/screeninfo.src -rw-r--r-- 1 root root 904 2008-02-11 03:44 ./source/l/ncurses/slack-desc -rw-r--r-- 1 root root 42014 2007-11-11 23:26 ./source/l/ncurses/xterm.terminfo -drwxr-xr-x 2 root root 4096 2009-06-13 02:28 ./source/l/neon --rw-r--r-- 1 root root 532304 2009-03-03 20:47 ./source/l/neon/neon-0.28.4.tar.xz --rwxr-xr-x 1 root root 3363 2009-06-13 02:28 ./source/l/neon/neon.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-05 22:03 ./source/l/neon +-rw-r--r-- 1 root root 604268 2009-09-13 12:32 ./source/l/neon/neon-0.29.0.tar.xz +-rwxr-xr-x 1 root root 3632 2009-12-05 22:04 ./source/l/neon/neon.SlackBuild -rw-r--r-- 1 root root 798 2006-09-18 07:08 ./source/l/neon/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/netpbm --rw-r--r-- 1 root root 9355 2007-02-16 00:36 ./source/l/netpbm/Makefile.config.gz --rw-r--r-- 1 root root 2058236 2007-02-16 01:13 ./source/l/netpbm/netpbm-10.35.22.tar.bz2 +drwxr-xr-x 2 root root 4096 2010-02-15 01:04 ./source/l/netpbm +-rw-r--r-- 1 root root 9563 2010-02-15 00:59 ./source/l/netpbm/config.mk.gz +-rw-r--r-- 1 root root 1917188 2010-02-15 01:03 ./source/l/netpbm/netpbm-10.49.02.tar.xz -rw-r--r-- 1 root root 322974 2004-04-11 19:27 ./source/l/netpbm/netpbm-manpages.tar.bz2 --rwxr-xr-x 1 root root 3591 2009-05-23 00:41 ./source/l/netpbm/netpbm.SlackBuild +-rwxr-xr-x 1 root root 4039 2010-02-15 00:59 ./source/l/netpbm/netpbm.SlackBuild -rw-r--r-- 1 root root 688 2004-04-11 19:47 ./source/l/netpbm/slack-desc -rwxr-xr-x 1 root root 77 2007-02-16 00:17 ./source/l/netpbm/svn-checkout-stable.sh +drwxr-xr-x 2 root root 4096 2009-09-16 18:16 ./source/l/notify-python +-rw-r--r-- 1 root root 214514 2006-10-08 18:07 ./source/l/notify-python/notify-python-0.1.1.tar.bz2 +-rwxr-xr-x 1 root root 3024 2010-02-20 18:19 ./source/l/notify-python/notify-python.SlackBuild +-rw-r--r-- 1 root root 819 2010-02-20 18:25 ./source/l/notify-python/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/openexr -rw-r--r-- 1 root root 12864668 2007-10-22 21:54 ./source/l/openexr/openexr-1.6.1.tar.bz2 -rwxr-xr-x 1 root root 2884 2009-05-23 00:41 ./source/l/openexr/openexr.SlackBuild -rw-r--r-- 1 root root 184 2009-04-06 19:06 ./source/l/openexr/openexr.gcc43.diff.gz -rw-r--r-- 1 root root 162 2008-04-29 21:13 ./source/l/openexr/openexr.info -rw-r--r-- 1 root root 915 2008-08-01 02:42 ./source/l/openexr/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 02:36 ./source/l/pango --rw-r--r-- 1 root root 1496168 2008-12-16 06:28 ./source/l/pango/pango-1.22.4.tar.bz2 --rwxr-xr-x 1 root root 4557 2009-06-11 17:12 ./source/l/pango/pango.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-12 07:13 ./source/l/pango +-rw-r--r-- 1 root root 1536011 2009-12-14 22:22 ./source/l/pango/pango-1.26.2.tar.bz2 +-rwxr-xr-x 1 root root 4948 2010-02-12 07:15 ./source/l/pango/pango.SlackBuild -rw-r--r-- 1 root root 450 2009-03-04 23:00 ./source/l/pango/pango.etc.host.location.diff.gz -rw-r--r-- 1 root root 885 2008-02-11 03:44 ./source/l/pango/slack-desc -rw-r--r-- 1 root root 2324 2009-08-11 18:03 ./source/l/pango/update-pango-querymodules -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/parted --rw-r--r-- 1 root root 1553881 2007-08-09 19:46 ./source/l/parted/parted-1.8.8.tar.bz2 --rw-r--r-- 1 root root 65 2007-08-09 19:47 ./source/l/parted/parted-1.8.8.tar.bz2.sig --rwxr-xr-x 1 root root 3497 2009-05-23 00:41 ./source/l/parted/parted.SlackBuild --rwxr-xr-x 1 root root 3509 2008-10-07 17:47 ./source/l/parted/parted.SlackBuild.static --rw-r--r-- 1 root root 270 2007-04-23 21:37 ./source/l/parted/parted.configure.diff.gz +drwxr-xr-x 2 root root 4096 2010-03-02 18:50 ./source/l/parted +-rw-r--r-- 1 root root 1407268 2010-02-26 15:13 ./source/l/parted/parted-2.2.tar.xz +-rwxr-xr-x 1 root root 4158 2010-02-07 03:35 ./source/l/parted/parted.SlackBuild +-rwxr-xr-x 1 root root 4158 2010-02-07 03:35 ./source/l/parted/parted.SlackBuild.static +-rw-r--r-- 1 root root 301 2009-12-23 03:52 ./source/l/parted/parted.configure.diff.gz -rw-r--r-- 1 root root 840 2002-06-05 05:27 ./source/l/parted/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/pcre --rw-r--r-- 1 root root 818897 2008-05-07 16:39 ./source/l/pcre/pcre-7.7.tar.bz2 --rw-r--r-- 1 root root 287 2008-05-07 16:39 ./source/l/pcre/pcre-7.7.tar.bz2.sig --rwxr-xr-x 1 root root 3330 2009-05-19 20:05 ./source/l/pcre/pcre.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-07 19:39 ./source/l/pcre +-rw-r--r-- 1 root root 956462 2010-03-19 10:27 ./source/l/pcre/pcre-8.02.tar.bz2 +-rw-r--r-- 1 root root 287 2010-03-19 10:27 ./source/l/pcre/pcre-8.02.tar.bz2.sig +-rwxr-xr-x 1 root root 4012 2010-05-07 22:45 ./source/l/pcre/pcre.SlackBuild -rw-r--r-- 1 root root 819 2002-03-30 19:17 ./source/l/pcre/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 02:22 ./source/l/phonon --rw-r--r-- 1 root root 575856 2009-02-27 10:22 ./source/l/phonon/phonon-4.3.1.tar.bz2 --rwxr-xr-x 1 root root 2950 2009-05-19 20:05 ./source/l/phonon/phonon.SlackBuild --rw-r--r-- 1 root root 629 2008-08-01 05:46 ./source/l/phonon/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/pil --rw-r--r-- 1 root root 369382 2007-08-05 16:12 ./source/l/pil/Imaging-1.1.6.tar.bz2 --rwxr-xr-x 1 root root 2534 2009-05-19 20:05 ./source/l/pil/pil.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/phonon +-rw-r--r-- 1 root root 625008 2010-04-22 14:15 ./source/l/phonon/phonon-4.4.1.tar.bz2 +-rwxr-xr-x 1 root root 3527 2010-04-29 21:18 ./source/l/phonon/phonon.SlackBuild +-rw-r--r-- 1 root root 4485 2009-11-07 02:31 ./source/l/phonon/phonon.gstreamer.qt-4.5.1.diff.gz +-rw-r--r-- 1 root root 761 2010-05-04 01:21 ./source/l/phonon/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-14 23:47 ./source/l/pil +-rw-r--r-- 1 root root 400368 2009-11-15 18:20 ./source/l/pil/Imaging-1.1.7.tar.xz +-rwxr-xr-x 1 root root 3218 2010-02-14 23:52 ./source/l/pil/pil.SlackBuild -rw-r--r-- 1 root root 873 2009-04-30 19:57 ./source/l/pil/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/l/pilot-link --rw-r--r-- 1 root root 960812 2007-11-12 18:17 ./source/l/pilot-link/pilot-link-0.12.3.tar.bz2 --rw-r--r-- 1 root root 189 2007-11-12 18:17 ./source/l/pilot-link/pilot-link-0.12.3.tar.bz2.asc --rwxr-xr-x 1 root root 3562 2009-05-23 00:41 ./source/l/pilot-link/pilot-link.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-02 07:06 ./source/l/pilot-link +-rw-r--r-- 1 root root 1578735 2010-02-07 03:44 ./source/l/pilot-link/pilot-link-0.12.5.tar.bz2 +-rw-r--r-- 1 root root 198 2010-02-07 04:48 ./source/l/pilot-link/pilot-link-0.12.5.tar.bz2.asc +-rwxr-xr-x 1 root root 4250 2010-05-02 07:08 ./source/l/pilot-link/pilot-link.SlackBuild +-rw-r--r-- 1 root root 645 2010-02-19 18:53 ./source/l/pilot-link/pilot-link.png14.diff.gz -rw-r--r-- 1 root root 877 2008-02-11 03:44 ./source/l/pilot-link/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 04:01 ./source/l/poppler -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/poppler-data --rw-r--r-- 1 root root 3460244 2008-09-30 21:02 ./source/l/poppler-data/poppler-data-0.2.1.tar.bz2 --rwxr-xr-x 1 root root 2030 2009-05-19 20:05 ./source/l/poppler-data/poppler-data.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-21 21:03 ./source/l/polkit +drwxr-xr-x 2 root root 4096 2010-05-08 05:25 ./source/l/polkit-gnome +-rw-r--r-- 1 root root 268 2010-05-03 06:04 ./source/l/polkit-gnome/pkga.desktop-NotShowInKDE.diff.gz +-rw-r--r-- 1 root root 362723 2010-01-15 19:25 ./source/l/polkit-gnome/polkit-gnome-0.96.tar.bz2 +-rwxr-xr-x 1 root root 3292 2010-05-08 05:27 ./source/l/polkit-gnome/polkit-gnome.SlackBuild +-rw-r--r-- 1 root root 829 2010-05-06 00:15 ./source/l/polkit-gnome/slack-desc +-rw-r--r-- 1 root root 30457 2010-03-19 22:49 ./source/l/polkit/polkit-1-shadow.diff +-rw-r--r-- 1 root root 310088 2010-03-30 19:58 ./source/l/polkit/polkit-1_14bdfd8.tar.bz2 +-rwxr-xr-x 1 root root 4503 2010-04-21 10:24 ./source/l/polkit/polkit.SlackBuild +-rw-r--r-- 1 root root 906 2010-01-06 23:14 ./source/l/polkit/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-18 22:45 ./source/l/poppler +drwxr-xr-x 2 root root 4096 2010-02-19 05:27 ./source/l/poppler-data +-rw-r--r-- 1 root root 1479464 2010-02-19 05:27 ./source/l/poppler-data/poppler-data-0.4.0.tar.xz +-rwxr-xr-x 1 root root 2102 2010-02-19 05:29 ./source/l/poppler-data/poppler-data.SlackBuild -rw-r--r-- 1 root root 1064 2007-04-12 01:35 ./source/l/poppler-data/slack-desc --rw-r--r-- 1 root root 1017696 2009-05-16 16:19 ./source/l/poppler/poppler-0.10.7.tar.xz --rwxr-xr-x 1 root root 3110 2009-06-09 04:01 ./source/l/poppler/poppler.SlackBuild +-rw-r--r-- 1 root root 1094116 2010-02-17 22:18 ./source/l/poppler/poppler-0.12.4.tar.xz +-rwxr-xr-x 1 root root 3793 2010-02-14 23:03 ./source/l/poppler/poppler.SlackBuild -rw-r--r-- 1 root root 952 2007-04-10 20:40 ./source/l/poppler/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/popt -rw-r--r-- 1 root root 489869 2002-09-17 20:57 ./source/l/popt/popt-1.7.tar.bz2 --rwxr-xr-x 1 root root 3243 2009-05-19 20:05 ./source/l/popt/popt.SlackBuild +-rwxr-xr-x 1 root root 3755 2010-04-26 02:44 ./source/l/popt/popt.SlackBuild -rw-r--r-- 1 root root 1047 2003-02-22 21:32 ./source/l/popt/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/pycairo --rw-r--r-- 1 root root 428965 2009-03-19 08:51 ./source/l/pycairo/pycairo-1.8.4.tar.bz2 --rwxr-xr-x 1 root root 2788 2009-06-11 16:57 ./source/l/pycairo/pycairo.SlackBuild --rw-r--r-- 1 root root 110 2009-02-17 01:57 ./source/l/pycairo/pycairo.info +drwxr-xr-x 2 root root 4096 2010-02-07 01:47 ./source/l/pycairo +-rw-r--r-- 1 root root 351356 2009-09-15 20:44 ./source/l/pycairo/pycairo-1.8.8.tar.xz +-rwxr-xr-x 1 root root 3468 2010-02-07 01:48 ./source/l/pycairo/pycairo.SlackBuild +-rw-r--r-- 1 root root 68 2009-12-14 01:46 ./source/l/pycairo/pycairo.url -rw-r--r-- 1 root root 744 2008-02-11 03:44 ./source/l/pycairo/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/pycups --rw-r--r-- 1 root root 39968 2009-01-08 17:16 ./source/l/pycups/pycups-1.9.45.tar.bz2 --rwxr-xr-x 1 root root 2206 2009-05-19 20:05 ./source/l/pycups/pycups.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-17 20:50 ./source/l/pycups +-rw-r--r-- 1 root root 45313 2010-01-19 12:38 ./source/l/pycups/pycups-1.9.48.tar.bz2 +-rwxr-xr-x 1 root root 2849 2010-02-17 20:51 ./source/l/pycups/pycups.SlackBuild -rw-r--r-- 1 root root 121 2008-07-25 02:41 ./source/l/pycups/pycups.info -rw-r--r-- 1 root root 688 2008-08-01 05:49 ./source/l/pycups/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/pygobject --rw-r--r-- 1 root root 522347 2009-02-22 11:29 ./source/l/pygobject/pygobject-2.16.1.tar.bz2 --rwxr-xr-x 1 root root 2776 2009-05-19 20:05 ./source/l/pygobject/pygobject.SlackBuild --rw-r--r-- 1 root root 123 2009-02-17 01:52 ./source/l/pygobject/pygobject.info +drwxr-xr-x 2 root root 4096 2010-02-07 01:36 ./source/l/pygobject +-rw-r--r-- 1 root root 666287 2009-10-19 05:32 ./source/l/pygobject/pygobject-2.20.0.tar.bz2 +-rwxr-xr-x 1 root root 3471 2010-02-07 01:44 ./source/l/pygobject/pygobject.SlackBuild +-rw-r--r-- 1 root root 72 2009-12-14 01:44 ./source/l/pygobject/pygobject.url -rw-r--r-- 1 root root 858 2008-02-11 03:44 ./source/l/pygobject/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 04:05 ./source/l/pygtk --rw-r--r-- 1 root root 2210535 2009-03-06 01:15 ./source/l/pygtk/pygtk-2.14.1.tar.bz2 --rwxr-xr-x 1 root root 2789 2009-06-09 04:06 ./source/l/pygtk/pygtk.SlackBuild +drwxr-xr-x 2 root root 4096 2009-09-15 20:52 ./source/l/pygtk +-rw-r--r-- 1 root root 2253202 2009-09-15 20:45 ./source/l/pygtk/pygtk-2.16.0.tar.bz2 +-rwxr-xr-x 1 root root 3484 2010-02-07 01:51 ./source/l/pygtk/pygtk.SlackBuild -rw-r--r-- 1 root root 777 2008-01-09 04:33 ./source/l/pygtk/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/pyrex -rw-r--r-- 1 root root 192596 2009-03-05 18:32 ./source/l/pyrex/Pyrex-0.9.8.5.tar.bz2 -rw-r--r-- 1 root root 58 2009-03-05 18:42 ./source/l/pyrex/Pyrex.url -rwxr-xr-x 1 root root 2396 2009-05-19 20:05 ./source/l/pyrex/pyrex.SlackBuild -rw-r--r-- 1 root root 847 2009-03-05 18:42 ./source/l/pyrex/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/qca +drwxr-xr-x 2 root root 4096 2009-11-03 22:35 ./source/l/qca drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/qca-cyrus-sasl -rw-r--r-- 1 root root 24075 2007-11-08 04:25 ./source/l/qca-cyrus-sasl/qca-cyrus-sasl-2.0.0-beta3.tar.bz2 -rwxr-xr-x 1 root root 2624 2009-05-19 20:05 ./source/l/qca-cyrus-sasl/qca-cyrus-sasl.SlackBuild @@ -6492,8 +6851,8 @@ drwxr-xr-x 2 root root 4096 2009-05-23 02:23 ./source/l/qca-ossl -rwxr-xr-x 1 root root 2734 2009-05-19 20:05 ./source/l/qca-ossl/qca-ossl.SlackBuild -rw-r--r-- 1 root root 443 2008-12-16 15:36 ./source/l/qca-ossl/qca-ossl.nowhirlpool.diff.gz -rw-r--r-- 1 root root 947 2008-07-31 03:44 ./source/l/qca-ossl/slack-desc --rw-r--r-- 1 root root 1925152 2008-07-21 17:21 ./source/l/qca/qca-2.0.1.tar.bz2 --rwxr-xr-x 1 root root 2643 2009-05-19 20:05 ./source/l/qca/qca.SlackBuild +-rw-r--r-- 1 root root 1937201 2009-04-29 21:47 ./source/l/qca/qca-2.0.2.tar.bz2 +-rwxr-xr-x 1 root root 2883 2009-11-03 22:35 ./source/l/qca/qca.SlackBuild -rw-r--r-- 1 root root 112 2008-07-24 15:03 ./source/l/qca/qca.info -rw-r--r-- 1 root root 1021 2006-07-31 21:42 ./source/l/qca/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/qimageblitz @@ -6501,33 +6860,33 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/qimageblitz -rwxr-xr-x 1 root root 2693 2009-05-19 20:05 ./source/l/qimageblitz/qimageblitz.SlackBuild -rw-r--r-- 1 root root 278 2007-12-18 16:29 ./source/l/qimageblitz/qimageblitz.info -rw-r--r-- 1 root root 851 2008-08-01 05:40 ./source/l/qimageblitz/slack-desc -drwxr-xr-x 3 root root 4096 2009-08-08 19:24 ./source/l/qt --rw-r--r-- 1 root root 204 2008-09-13 20:26 ./source/l/qt/README +drwxr-xr-x 3 root root 4096 2010-05-04 00:31 ./source/l/qt +-rw-r--r-- 1 root root 289 2009-09-29 00:01 ./source/l/qt/README -rw-r--r-- 1 root root 92 2007-12-22 17:48 ./source/l/qt/doinst.sh.gz drwxr-xr-x 2 root root 4096 2008-10-03 20:21 ./source/l/qt/profile.d -rwxr-xr-x 1 root root 661 2008-10-03 20:23 ./source/l/qt/profile.d/qt4.csh -rwxr-xr-x 1 root root 561 2008-10-03 20:23 ./source/l/qt/profile.d/qt4.sh --rw-r--r-- 1 root root 49638532 2009-08-08 19:21 ./source/l/qt/qt-r1008952.tar.xz --rwxr-xr-x 1 root root 5804 2009-08-08 18:59 ./source/l/qt/qt.SlackBuild +-rw-r--r-- 1 root root 93080240 2010-03-23 22:09 ./source/l/qt/qt-4.6.2_2d3d3e5.tar.xz +-rwxr-xr-x 1 root root 6383 2010-03-24 20:10 ./source/l/qt/qt.SlackBuild -rw-r--r-- 1 root root 277 2008-04-03 01:53 ./source/l/qt/qt.mysql.h.diff.gz -rw-r--r-- 1 root root 260 2007-12-22 06:24 ./source/l/qt/qt.x86.cflags.diff.gz --rw-r--r-- 1 root root 688 2008-04-06 01:19 ./source/l/qt/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/l/qtscriptgenerator +-rw-r--r-- 1 root root 719 2010-05-04 00:21 ./source/l/qt/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-19 01:56 ./source/l/qtscriptgenerator -rw-r--r-- 1 root root 564 2009-06-05 09:21 ./source/l/qtscriptgenerator/include-everything.patch.gz -rw-r--r-- 1 root root 374223 2009-06-05 09:22 ./source/l/qtscriptgenerator/qtscriptgenerator-src-0.1.0.tar.gz --rwxr-xr-x 1 root root 3574 2009-06-05 14:31 ./source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild +-rwxr-xr-x 1 root root 3960 2010-02-19 01:13 ./source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild +-rw-r--r-- 1 root root 197 2010-02-19 01:13 ./source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff.gz -rw-r--r-- 1 root root 292 2009-06-05 09:22 ./source/l/qtscriptgenerator/qtscriptgenerator.info -rw-r--r-- 1 root root 945 2009-06-05 09:34 ./source/l/qtscriptgenerator/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/raptor --rw-r--r-- 1 root root 1188777 2008-06-26 04:04 ./source/l/raptor/raptor-1.4.18.tar.bz2 --rwxr-xr-x 1 root root 2967 2009-05-19 20:05 ./source/l/raptor/raptor.SlackBuild --rw-r--r-- 1 root root 96 2008-06-28 05:51 ./source/l/raptor/raptor.info +drwxr-xr-x 2 root root 4096 2010-03-05 21:43 ./source/l/raptor +-rw-r--r-- 1 root root 907160 2010-01-30 16:21 ./source/l/raptor/raptor-1.4.21.tar.xz +-rwxr-xr-x 1 root root 3641 2010-03-05 21:45 ./source/l/raptor/raptor.SlackBuild +-rw-r--r-- 1 root root 96 2009-11-28 04:16 ./source/l/raptor/raptor.info -rw-r--r-- 1 root root 624 2008-08-01 05:21 ./source/l/raptor/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/rasqal --rw-r--r-- 1 root root 755631 2008-07-05 23:54 ./source/l/rasqal/rasqal-0.9.16.tar.bz2 --rwxr-xr-x 1 root root 2950 2009-05-19 20:05 ./source/l/rasqal/rasqal.SlackBuild --rw-r--r-- 1 root root 171 2007-12-20 01:01 ./source/l/rasqal/rasqal.info --rw-r--r-- 1 root root 507 2008-08-01 05:23 ./source/l/rasqal/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/rasqal +-rw-r--r-- 1 root root 722244 2010-04-21 11:59 ./source/l/rasqal/rasqal-0.9.19.tar.xz +-rwxr-xr-x 1 root root 3351 2010-04-21 12:02 ./source/l/rasqal/rasqal.SlackBuild +-rw-r--r-- 1 root root 507 2010-05-04 00:22 ./source/l/rasqal/slack-desc drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/l/readline drwxr-xr-x 2 root root 4096 2009-02-21 22:42 ./source/l/readline/readline-5.2-patches -rw-r--r-- 1 root root 874 2006-12-12 21:25 ./source/l/readline/readline-5.2-patches/readline52-001 @@ -6559,52 +6918,54 @@ drwxr-xr-x 2 root root 4096 2009-02-21 22:42 ./source/l/readline/readline- -rw-r--r-- 1 root root 1693789 2006-10-11 16:12 ./source/l/readline/readline-5.2.tar.bz2 -rwxr-xr-x 1 root root 2767 2009-05-19 20:05 ./source/l/readline/readline.SlackBuild -rw-r--r-- 1 root root 1018 2002-03-23 23:44 ./source/l/readline/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/redland --rw-r--r-- 1 root root 2844315 2008-07-06 00:46 ./source/l/redland/redland-1.0.8.tar.bz2 --rwxr-xr-x 1 root root 3004 2009-05-19 20:05 ./source/l/redland/redland.SlackBuild --rw-r--r-- 1 root root 171 2008-02-10 17:30 ./source/l/redland/redland.info +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/redland +-rw-r--r-- 1 root root 843196 2010-04-21 14:23 ./source/l/redland/redland-1.0.10.tar.xz +-rwxr-xr-x 1 root root 4006 2010-04-21 20:49 ./source/l/redland/redland.SlackBuild -rw-r--r-- 1 root root 606 2008-08-01 05:25 ./source/l/redland/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-16 01:42 ./source/l/sdl --rw-r--r-- 1 root root 3001341 2007-12-31 06:35 ./source/l/sdl/SDL-1.2.13.tar.bz2 --rw-r--r-- 1 root root 1230929 2008-11-24 06:54 ./source/l/sdl/SDL_image-1.2.7.tar.bz2 --rw-r--r-- 1 root root 2012141 2007-07-21 07:17 ./source/l/sdl/SDL_mixer-1.2.8.tar.bz2 --rw-r--r-- 1 root root 246 2008-03-13 19:38 ./source/l/sdl/SDL_mixer-1.2.8.usrlocal.diff.gz --rw-r--r-- 1 root root 277828 2007-07-21 08:04 ./source/l/sdl/SDL_net-1.2.7.tar.bz2 --rw-r--r-- 1 root root 3066276 2007-07-21 17:27 ./source/l/sdl/SDL_ttf-2.0.9.tar.bz2 --rwxr-xr-x 1 root root 6041 2009-06-16 01:48 ./source/l/sdl/sdl.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-14 23:16 ./source/l/sdl +-rw-r--r-- 1 root root 3077408 2009-10-20 03:53 ./source/l/sdl/SDL-1.2.14.tar.xz +-rw-r--r-- 1 root root 1212636 2009-11-15 09:44 ./source/l/sdl/SDL_image-1.2.10.tar.xz +-rw-r--r-- 1 root root 2525128 2009-11-15 09:42 ./source/l/sdl/SDL_mixer-1.2.11.tar.xz +-rw-r--r-- 1 root root 212 2010-02-14 23:16 ./source/l/sdl/SDL_mixer.usrlocal.diff.gz +-rw-r--r-- 1 root root 223252 2007-07-21 08:04 ./source/l/sdl/SDL_net-1.2.7.tar.xz +-rw-r--r-- 1 root root 2996772 2007-07-21 17:27 ./source/l/sdl/SDL_ttf-2.0.9.tar.xz +-rwxr-xr-x 1 root root 7029 2010-03-25 21:43 ./source/l/sdl/sdl.SlackBuild -rw-r--r-- 1 root root 941 2004-03-27 18:28 ./source/l/sdl/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/shared-mime-info --rw-r--r-- 1 root root 117 2009-03-09 17:14 ./source/l/shared-mime-info/doinst.sh.gz --rw-r--r-- 1 root root 457377 2009-03-09 17:01 ./source/l/shared-mime-info/shared-mime-info-0.60.tar.bz2 --rwxr-xr-x 1 root root 3179 2009-05-19 20:05 ./source/l/shared-mime-info/shared-mime-info.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-24 11:29 ./source/l/shared-desktop-ontologies +-rw-r--r-- 1 root root 88098 2010-03-24 11:28 ./source/l/shared-desktop-ontologies/shared-desktop-ontologies-0.3.tar.bz2 +-rwxr-xr-x 1 root root 3404 2010-05-05 23:33 ./source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild +-rw-r--r-- 1 root root 1119 2010-05-05 23:32 ./source/l/shared-desktop-ontologies/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-27 20:41 ./source/l/shared-mime-info +-rw-r--r-- 1 root root 352 2009-10-18 22:47 ./source/l/shared-mime-info/doinst.sh.gz +-rw-r--r-- 1 root root 493216 2010-02-01 17:45 ./source/l/shared-mime-info/shared-mime-info-0.71.tar.bz2 +-rwxr-xr-x 1 root root 3825 2010-04-30 05:09 ./source/l/shared-mime-info/shared-mime-info.SlackBuild -rw-r--r-- 1 root root 979 2007-12-23 22:25 ./source/l/shared-mime-info/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/sip --rw-r--r-- 1 root root 337579 2008-12-18 19:31 ./source/l/sip/sip-4.7.9.tar.bz2 --rwxr-xr-x 1 root root 2740 2009-05-19 20:05 ./source/l/sip/sip.SlackBuild --rw-r--r-- 1 root root 147 2008-06-21 14:38 ./source/l/sip/sip.info --rw-r--r-- 1 root root 849 2008-08-01 05:27 ./source/l/sip/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-22 02:48 ./source/l/slang +drwxr-xr-x 2 root root 4096 2010-05-04 00:42 ./source/l/sip +-rw-r--r-- 1 root root 393460 2010-04-16 10:19 ./source/l/sip/sip-4.10.2.tar.xz +-rwxr-xr-x 1 root root 3026 2010-04-21 09:51 ./source/l/sip/sip.SlackBuild +-rw-r--r-- 1 root root 147 2009-11-28 04:43 ./source/l/sip/sip.info +-rw-r--r-- 1 root root 849 2010-05-04 00:22 ./source/l/sip/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-18 23:06 ./source/l/slang -rw-r--r-- 1 root root 994 2006-08-01 05:37 ./source/l/slang/slack-desc --rw-r--r-- 1 root root 1283938 2008-09-07 22:32 ./source/l/slang/slang-2.1.4.tar.bz2 --rw-r--r-- 1 root root 261 2008-09-07 22:34 ./source/l/slang/slang-2.1.4.tar.bz2.asc --rwxr-xr-x 1 root root 3462 2009-06-22 02:49 ./source/l/slang/slang.SlackBuild +-rw-r--r-- 1 root root 1366850 2009-12-05 19:11 ./source/l/slang/slang-2.2.2.tar.bz2 +-rw-r--r-- 1 root root 261 2009-12-05 19:14 ./source/l/slang/slang-2.2.2.tar.bz2.asc +-rwxr-xr-x 1 root root 3778 2010-02-18 23:06 ./source/l/slang/slang.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/slang1 -rw-r--r-- 1 root root 1006 2006-08-01 05:37 ./source/l/slang1/slack-desc -rw-r--r-- 1 root root 631079 2003-03-23 05:58 ./source/l/slang1/slang-1.4.9.tar.bz2 -rwxr-xr-x 1 root root 2987 2009-05-19 20:05 ./source/l/slang1/slang1.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/soprano --rw-r--r-- 1 root root 845 2009-03-08 00:29 ./source/l/soprano/slack-desc --rw-r--r-- 1 root root 1849174 2009-03-02 08:26 ./source/l/soprano/soprano-2.2.3.tar.bz2 --rwxr-xr-x 1 root root 2694 2009-05-19 20:05 ./source/l/soprano/soprano.SlackBuild --rw-r--r-- 1 root root 43 2008-04-21 14:15 ./source/l/soprano/soprano.info -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/startup-notification +drwxr-xr-x 2 root root 4096 2010-05-04 00:31 ./source/l/soprano +-rw-r--r-- 1 root root 845 2010-05-04 00:22 ./source/l/soprano/slack-desc +-rw-r--r-- 1 root root 1944785 2010-04-22 09:53 ./source/l/soprano/soprano-2.4.3.tar.bz2 +-rwxr-xr-x 1 root root 2989 2010-04-30 12:20 ./source/l/soprano/soprano.SlackBuild +drwxr-xr-x 2 root root 4096 2009-06-10 04:48 ./source/l/startup-notification -rw-r--r-- 1 root root 830 2008-02-11 03:44 ./source/l/startup-notification/slack-desc --rw-r--r-- 1 root root 226231 2007-03-17 19:32 ./source/l/startup-notification/startup-notification-0.9.tar.bz2 --rwxr-xr-x 1 root root 2721 2009-06-09 02:21 ./source/l/startup-notification/startup-notification.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/strigi +-rw-r--r-- 1 root root 248645 2009-06-10 04:47 ./source/l/startup-notification/startup-notification-0.10.tar.bz2 +-rwxr-xr-x 1 root root 3060 2010-02-06 03:36 ./source/l/startup-notification/startup-notification.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-08 23:13 ./source/l/strigi -rw-r--r-- 1 root root 965 2008-08-01 01:27 ./source/l/strigi/slack-desc --rw-r--r-- 1 root root 895552 2009-02-01 20:46 ./source/l/strigi/strigi-0.6.4.tar.bz2 --rwxr-xr-x 1 root root 2770 2009-05-19 20:05 ./source/l/strigi/strigi.SlackBuild +-rw-r--r-- 1 root root 936320 2010-02-03 19:09 ./source/l/strigi/strigi-0.7.2.tar.bz2 +-rwxr-xr-x 1 root root 3448 2010-02-08 23:14 ./source/l/strigi/strigi.SlackBuild -rw-r--r-- 1 root root 146 2008-05-17 02:12 ./source/l/strigi/strigi.info drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/svgalib -rw-r--r-- 1 root root 802 2009-03-09 23:10 ./source/l/svgalib/slack-desc @@ -6613,18 +6974,23 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/svgalib -rwxr-xr-x 1 root root 3717 2009-05-19 20:05 ./source/l/svgalib/svgalib.SlackBuild -rw-r--r-- 1 root root 271 2009-03-09 23:07 ./source/l/svgalib/svgalib.nohelper.diff.gz -rw-r--r-- 1 root root 282 2007-03-30 00:48 ./source/l/svgalib/svgalib.prefix.diff.gz +drwxr-xr-x 2 root root 4096 2010-05-18 20:24 ./source/l/system-config-printer +-rw-r--r-- 1 root root 380 2010-05-05 21:43 ./source/l/system-config-printer/doinst.sh.gz +-rw-r--r-- 1 root root 1217 2010-05-04 00:23 ./source/l/system-config-printer/slack-desc +-rw-r--r-- 1 root root 904696 2010-05-07 15:13 ./source/l/system-config-printer/system-config-printer-1.2.2.tar.xz +-rwxr-xr-- 1 root root 4057 2010-05-18 20:24 ./source/l/system-config-printer/system-config-printer.SlackBuild drwxr-xr-x 2 root root 4096 2009-06-09 00:43 ./source/l/t1lib -rw-r--r-- 1 root root 813 2002-04-30 02:17 ./source/l/t1lib/slack-desc -rw-r--r-- 1 root root 1429408 2007-12-23 16:07 ./source/l/t1lib/t1lib-5.1.2.tar.xz -rwxr-xr-x 1 root root 3576 2009-06-09 00:43 ./source/l/t1lib/t1lib.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/taglib -drwxr-xr-x 2 root root 4096 2009-06-06 01:24 ./source/l/taglib-extras +drwxr-xr-x 2 root root 4096 2010-04-10 19:51 ./source/l/taglib +drwxr-xr-x 2 root root 4096 2009-12-17 02:17 ./source/l/taglib-extras -rw-r--r-- 1 root root 985 2009-06-05 09:55 ./source/l/taglib-extras/slack-desc --rw-r--r-- 1 root root 48904 2009-05-02 12:44 ./source/l/taglib-extras/taglib-extras-0.1.3.tar.gz --rwxr-xr-x 1 root root 2832 2009-06-05 10:12 ./source/l/taglib-extras/taglib-extras.SlackBuild +-rw-r--r-- 1 root root 31363 2009-09-21 21:36 ./source/l/taglib-extras/taglib-extras-1.0.1.tar.gz +-rwxr-xr-x 1 root root 2843 2009-10-03 00:32 ./source/l/taglib-extras/taglib-extras.SlackBuild -rw-r--r-- 1 root root 797 2004-02-22 08:50 ./source/l/taglib/slack-desc --rw-r--r-- 1 root root 998425 2008-02-21 00:51 ./source/l/taglib/taglib-1.5.tar.bz2 --rwxr-xr-x 1 root root 2523 2009-05-19 20:05 ./source/l/taglib/taglib.SlackBuild +-rw-r--r-- 1 root root 637840 2010-04-09 10:46 ./source/l/taglib/taglib-1.6.2.tar.xz +-rwxr-xr-x 1 root root 2952 2010-04-10 19:52 ./source/l/taglib/taglib.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/tango-icon-theme drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/tango-icon-theme-extras -rw-r--r-- 1 root root 1015 2008-02-27 07:27 ./source/l/tango-icon-theme-extras/slack-desc @@ -6633,33 +6999,41 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/tango-icon-theme-e -rw-r--r-- 1 root root 990 2008-02-27 07:13 ./source/l/tango-icon-theme/slack-desc -rw-r--r-- 1 root root 1376581 2009-02-26 03:21 ./source/l/tango-icon-theme/tango-icon-theme-0.8.90.tar.bz2 -rwxr-xr-x 1 root root 2033 2009-05-19 20:05 ./source/l/tango-icon-theme/tango-icon-theme.SlackBuild -drwxr-xr-x 2 root root 4096 2009-04-21 15:09 ./source/l/urwid +drwxr-xr-x 2 root root 4096 2010-01-27 02:15 ./source/l/urwid -rw-r--r-- 1 root root 9389 2009-03-13 22:05 ./source/l/urwid/LICENSE.gz -rw-r--r-- 1 root root 843 2009-04-21 15:06 ./source/l/urwid/slack-desc --rw-r--r-- 1 root root 184002 2009-03-13 19:38 ./source/l/urwid/urwid-0.9.8.4.tar.gz --rwxr-xr-x 1 root root 2637 2009-07-01 18:23 ./source/l/urwid/urwid.SlackBuild +-rw-r--r-- 1 root root 238005 2010-01-25 12:34 ./source/l/urwid/urwid-0.9.9.1.tar.gz +-rwxr-xr-x 1 root root 2867 2010-01-27 02:15 ./source/l/urwid/urwid.SlackBuild -rw-r--r-- 1 root root 24 2009-03-14 23:33 ./source/l/urwid/urwid.url -drwxr-xr-x 2 root root 4096 2009-06-11 17:47 ./source/l/vte +drwxr-xr-x 2 root root 4096 2010-05-14 03:55 ./source/l/v4l-utils +-rw-r--r-- 1 root root 1030 2010-05-14 03:55 ./source/l/v4l-utils/slack-desc +-rw-r--r-- 1 root root 244204 2010-05-14 03:45 ./source/l/v4l-utils/v4l-utils-0.8.0.tar.xz +-rwxr-xr-x 1 root root 3036 2010-05-14 03:55 ./source/l/v4l-utils/v4l-utils.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-20 20:48 ./source/l/virtuoso-ose +-rw-r--r-- 1 root root 267 2009-12-24 23:22 ./source/l/virtuoso-ose/doinst.sh.gz +-rw-r--r-- 1 root root 889 2010-02-24 20:39 ./source/l/virtuoso-ose/slack-desc +-rw-r--r-- 1 root root 59528964 2010-04-20 20:48 ./source/l/virtuoso-ose/virtuoso-opensource-6.1.1.tar.xz +-rwxr-xr-x 1 root root 3617 2010-04-20 20:49 ./source/l/virtuoso-ose/virtuoso-ose.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-28 14:28 ./source/l/vte -rw-r--r-- 1 root root 710 2007-02-17 03:01 ./source/l/vte/slack-desc --rw-r--r-- 1 root root 917092 2009-06-10 00:56 ./source/l/vte/vte-0.20.5.tar.xz --rwxr-xr-x 1 root root 3312 2009-06-11 18:07 ./source/l/vte/vte.SlackBuild +-rw-r--r-- 1 root root 1312731 2010-04-26 13:44 ./source/l/vte/vte-0.24.1.tar.bz2 +-rwxr-xr-x 1 root root 3995 2010-02-12 01:50 ./source/l/vte/vte.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/wavpack -rw-r--r-- 1 root root 841 2008-03-16 05:02 ./source/l/wavpack/slack-desc -rw-r--r-- 1 root root 329241 2007-05-08 00:47 ./source/l/wavpack/wavpack-4.41.0.tar.bz2 -rwxr-xr-x 1 root root 2754 2009-05-19 20:05 ./source/l/wavpack/wavpack.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/wv2 +drwxr-xr-x 2 root root 4096 2009-11-28 04:35 ./source/l/wv2 -rw-r--r-- 1 root root 876 2003-11-17 01:49 ./source/l/wv2/slack-desc --rw-r--r-- 1 root root 908983 2006-06-12 17:13 ./source/l/wv2/wv2-0.2.3.tar.bz2 --rw-r--r-- 1 root root 189 2006-06-12 17:13 ./source/l/wv2/wv2-0.2.3.tar.bz2.asc --rwxr-xr-x 1 root root 2540 2009-05-19 20:05 ./source/l/wv2/wv2.SlackBuild +-rw-r--r-- 1 root root 373612 2009-10-31 18:23 ./source/l/wv2/wv2-0.4.2.tar.xz +-rwxr-xr-x 1 root root 2939 2009-12-17 02:11 ./source/l/wv2/wv2.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/l/zlib -rw-r--r-- 1 root root 814 2002-02-15 03:04 ./source/l/zlib/slack-desc -rw-r--r-- 1 root root 425209 2005-07-18 13:39 ./source/l/zlib/zlib-1.2.3.tar.bz2 -rwxr-xr-x 1 root root 2956 2009-05-19 20:05 ./source/l/zlib/zlib.SlackBuild -drwxr-xr-x 125 root root 4096 2009-08-18 18:44 ./source/n +drwxr-xr-x 130 root root 4096 2010-05-17 19:24 ./source/n drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/alpine -rw-r--r-- 1 root root 5222673 2008-08-26 01:20 ./source/n/alpine/alpine-2.00.tar.bz2 --rwxr-xr-x 1 root root 6321 2009-05-23 04:11 ./source/n/alpine/alpine.SlackBuild +-rwxr-xr-x 1 root root 6362 2010-03-06 03:07 ./source/n/alpine/alpine.SlackBuild -rw-r--r-- 1 root root 255 2008-08-07 02:01 ./source/n/alpine/alpine.config.h.diff.gz -rw-r--r-- 1 root root 301 2008-08-07 01:01 ./source/n/alpine/alpine.manpage.diff.gz -rw-r--r-- 1 root root 2493 2008-08-07 19:00 ./source/n/alpine/alpine.tech-notes.txt.diff.gz @@ -6670,13 +7044,11 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/alpine -rw-r--r-- 1 root root 157 2008-08-07 02:50 ./source/n/alpine/pinepgp.pinegpgp.in.diff.gz -rw-r--r-- 1 root root 1102 2008-08-07 00:54 ./source/n/alpine/slack-desc.alpine -rw-r--r-- 1 root root 749 2008-08-07 00:39 ./source/n/alpine/slack-desc.imapd -drwxr-xr-x 2 root root 4096 2009-05-23 02:35 ./source/n/autofs --rw-r--r-- 1 root root 173 2001-03-24 22:18 ./source/n/autofs/autofs-3.1.7.diff.gz --rw-r--r-- 1 root root 57000 2000-11-04 07:05 ./source/n/autofs/autofs-3.1.7.tar.bz2 --rw-r--r-- 1 root root 248 2000-11-04 07:05 ./source/n/autofs/autofs-3.1.7.tar.bz2.sign --rwxr-xr-x 1 root root 2810 2009-05-19 20:05 ./source/n/autofs/autofs.SlackBuild --rw-r--r-- 1 root root 253 2008-10-23 22:33 ./source/n/autofs/autofs.gcc.fix.diff.gz --rw-r--r-- 1 root root 284 2008-10-23 22:30 ./source/n/autofs/autofs.x86_64.diff.gz +drwxr-xr-x 2 root root 4096 2010-03-05 22:57 ./source/n/autofs +-rw-r--r-- 1 root root 857 2010-03-05 22:37 ./source/n/autofs/autofs-5.0.5-fix-libxml2-workaround-configure.patch.gz +-rw-r--r-- 1 root root 301327 2009-09-03 10:11 ./source/n/autofs/autofs-5.0.5.tar.bz2 +-rwxr-xr-x 1 root root 4248 2010-03-05 23:01 ./source/n/autofs/autofs.SlackBuild +-rw-r--r-- 1 root root 369 2010-03-05 22:57 ./source/n/autofs/doinst.sh.gz -rw-r--r-- 1 root root 873 2002-02-27 02:39 ./source/n/autofs/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/biff+comsat -rw-r--r-- 1 root root 195 2001-02-26 02:06 ./source/n/biff+comsat/biff+comsat-0.17.diff.gz @@ -6685,11 +7057,11 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/biff+comsat -rw-r--r-- 1 root root 729 2004-06-21 20:51 ./source/n/biff+comsat/biff+comsat.badutmp.diff.gz -rw-r--r-- 1 root root 1222 2001-06-03 08:32 ./source/n/biff+comsat/biff+comsat.offset.diff.gz -rw-r--r-- 1 root root 1148 2007-04-30 01:44 ./source/n/biff+comsat/slack-desc -drwxr-xr-x 3 root root 4096 2009-07-29 21:09 ./source/n/bind +drwxr-xr-x 3 root root 4096 2009-11-27 20:54 ./source/n/bind -rw-r--r-- 1 root root 5120 2007-06-08 04:48 ./source/n/bind/3link.sh --rw-r--r-- 1 root root 6544968 2009-07-28 17:24 ./source/n/bind/bind-9.4.3-P3.tar.gz --rw-r--r-- 1 root root 481 2009-07-29 15:19 ./source/n/bind/bind-9.4.3-P3.tar.gz.asc --rwxr-xr-x 1 root root 5191 2009-07-29 22:11 ./source/n/bind/bind.SlackBuild +-rw-r--r-- 1 root root 6545707 2009-11-24 15:03 ./source/n/bind/bind-9.4.3-P4.tar.gz +-rw-r--r-- 1 root root 481 2009-11-24 15:03 ./source/n/bind/bind-9.4.3-P4.tar.gz.asc +-rwxr-xr-x 1 root root 5459 2009-11-27 20:54 ./source/n/bind/bind.SlackBuild -rw-r--r-- 1 root root 230 2007-06-08 04:17 ./source/n/bind/bind.man.diff.gz -rw-r--r-- 1 root root 280 2006-02-18 19:10 ./source/n/bind/bind.so_bsdcompat.diff.gz -rw-r--r-- 1 root root 290 2002-02-27 02:51 ./source/n/bind/bind.var.run.named.diff.gz @@ -6701,30 +7073,29 @@ drwxr-xr-x 2 root root 4096 2008-04-13 21:26 ./source/n/bind/caching-examp -rw-r--r-- 1 root root 514 2009-05-23 08:11 ./source/n/bind/doinst.sh.gz -rw-r--r-- 1 root root 3116 2008-04-13 21:48 ./source/n/bind/rc.bind -rw-r--r-- 1 root root 791 2002-02-27 02:45 ./source/n/bind/slack-desc +drwxr-xr-x 4 root root 4096 2010-05-02 08:06 ./source/n/bluez drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/bluez-firmware -rw-r--r-- 1 root root 262963 2007-04-23 22:58 ./source/n/bluez-firmware/bluez-firmware-1.2.tar.bz2 -rwxr-xr-x 1 root root 2948 2009-05-19 20:05 ./source/n/bluez-firmware/bluez-firmware.SlackBuild -rw-r--r-- 1 root root 832 2007-04-23 22:59 ./source/n/bluez-firmware/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/bluez-hcidump +drwxr-xr-x 2 root root 4096 2010-03-03 05:16 ./source/n/bluez-hcidump -rw-r--r-- 1 root root 122212 2008-06-15 20:41 ./source/n/bluez-hcidump/bluez-hcidump-1.42.tar.bz2 --rwxr-xr-x 1 root root 3172 2009-05-19 20:05 ./source/n/bluez-hcidump/bluez-hcidump.SlackBuild --rw-r--r-- 1 root root 913 2007-04-23 23:29 ./source/n/bluez-hcidump/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/bluez-libs --rw-r--r-- 1 root root 256188 2008-07-11 10:46 ./source/n/bluez-libs/bluez-libs-3.36.tar.bz2 --rwxr-xr-x 1 root root 3252 2009-05-19 20:05 ./source/n/bluez-libs/bluez-libs.SlackBuild --rw-r--r-- 1 root root 799 2007-04-23 22:56 ./source/n/bluez-libs/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/bluez-utils --rw-r--r-- 1 root root 2199 2007-12-03 20:51 ./source/n/bluez-utils/60-bluetooth.rules --rw-r--r-- 1 root root 696 2007-02-25 01:09 ./source/n/bluez-utils/README.SLACKWARE --rw-r--r-- 1 root root 9792 2007-02-25 01:09 ./source/n/bluez-utils/add-passkey.c --rw-r--r-- 1 root root 685 2009-01-26 01:12 ./source/n/bluez-utils/bluetooth.conf --rw-r--r-- 1 root root 732205 2008-07-11 10:47 ./source/n/bluez-utils/bluez-utils-3.36.tar.bz2 --rwxr-xr-x 1 root root 5588 2009-08-24 09:08 ./source/n/bluez-utils/bluez-utils.SlackBuild --rw-r--r-- 1 root root 395 2009-01-26 01:26 ./source/n/bluez-utils/doinst.sh.gz --rw-r--r-- 1 root root 3299 2009-06-12 19:10 ./source/n/bluez-utils/rc.bluetooth --rw-r--r-- 1 root root 1051 2008-09-18 05:45 ./source/n/bluez-utils/rc.bluetooth.conf --rw-r--r-- 1 root root 536 2007-02-25 01:09 ./source/n/bluez-utils/register-passkeys --rw-r--r-- 1 root root 786 2007-05-15 23:04 ./source/n/bluez-utils/slack-desc +-rwxr-xr-x 1 root root 3917 2010-05-02 06:04 ./source/n/bluez-hcidump/bluez-hcidump.SlackBuild +-rw-r--r-- 1 root root 478 2010-03-03 05:15 ./source/n/bluez-hcidump/hci.c_for_bluez-4.61.patch.gz +-rw-r--r-- 1 root root 909 2010-05-02 06:03 ./source/n/bluez-hcidump/slack-desc +-rw-r--r-- 1 root root 668568 2010-04-28 16:03 ./source/n/bluez/bluez-4.64.tar.xz +-rwxr-xr-x 1 root root 6173 2010-05-02 08:07 ./source/n/bluez/bluez.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-30 18:39 ./source/n/bluez/config +-rw-r--r-- 1 root root 128 2009-12-30 18:25 ./source/n/bluez/config/bluetooth.modprobe +-rw-r--r-- 1 root root 213 2009-12-30 18:18 ./source/n/bluez/config/bluetooth.sh +-rw-r--r-- 1 root root 497 2010-04-20 16:27 ./source/n/bluez/config/rc.bluetooth +-rw-r--r-- 1 root root 395 2010-03-03 15:39 ./source/n/bluez/doinst.sh.gz +-rw-r--r-- 1 root root 9998 2009-10-30 15:38 ./source/n/bluez/passkey-agent.c +drwxr-xr-x 2 root root 4096 2010-03-15 20:14 ./source/n/bluez/patches +-rw-r--r-- 1 root root 436 2010-02-18 23:49 ./source/n/bluez/patches/bluez-dbus-config.patch.gz +-rw-r--r-- 1 root root 446 2009-12-30 18:14 ./source/n/bluez/patches/bluez-run_udev_helper.patch.gz +-rw-r--r-- 1 root root 433 2009-12-30 18:35 ./source/n/bluez/patches/bluez-unbreak_dell_mouse.patch.gz +-rw-r--r-- 1 root root 803 2010-05-02 05:59 ./source/n/bluez/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/bootp -rw-r--r-- 1 root root 616 2006-06-09 23:31 ./source/n/bootp/_bootp.tar.gz -rwxr-xr-x 1 root root 2527 2009-05-19 20:05 ./source/n/bootp/bootp.SlackBuild @@ -6742,17 +7113,17 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/bsd-finger -rw-r--r-- 1 root root 25521 2000-07-31 02:56 ./source/n/bsd-finger/bsd-finger-0.17.tar.gz -rwxr-xr-x 1 root root 2222 2009-05-19 20:05 ./source/n/bsd-finger/bsd-finger.SlackBuild -rw-r--r-- 1 root root 1075 2007-04-30 01:53 ./source/n/bsd-finger/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/crda --rw-r--r-- 1 root root 21013 2009-02-22 22:51 ./source/n/crda/crda-1.0.1.tar.bz2 --rwxr-xr-x 1 root root 3345 2009-05-19 20:05 ./source/n/crda/crda.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 01:18 ./source/n/crda +-rw-r--r-- 1 root root 21666 2010-05-03 01:18 ./source/n/crda/crda-1.1.1.tar.bz2 +-rwxr-xr-x 1 root root 3643 2010-05-03 01:19 ./source/n/crda/crda.SlackBuild -rw-r--r-- 1 root root 380 2009-02-23 01:33 ./source/n/crda/get_regdb.sh -rw-r--r-- 1 root root 870 2009-03-09 05:07 ./source/n/crda/slack-desc --rw-r--r-- 1 root root 41997 2009-02-22 23:03 ./source/n/crda/wireless-regdb-git_20090222.tar.bz2 -drwxr-xr-x 2 root root 4096 2009-08-13 03:34 ./source/n/curl --rw-r--r-- 1 root root 99114 2009-03-26 21:22 ./source/n/curl/cacert.pem.bz2 --rw-r--r-- 1 root root 2347791 2009-08-12 09:01 ./source/n/curl/curl-7.19.6.tar.bz2 --rw-r--r-- 1 root root 197 2009-08-12 09:01 ./source/n/curl/curl-7.19.6.tar.bz2.asc --rwxr-xr-x 1 root root 3409 2009-08-13 03:34 ./source/n/curl/curl.SlackBuild +-rw-r--r-- 1 root root 68146 2010-05-03 01:17 ./source/n/crda/wireless-regdb-git_20100502.tar.bz2 +drwxr-xr-x 2 root root 4096 2010-04-20 18:06 ./source/n/curl +-rw-r--r-- 1 root root 111348 2009-09-22 09:27 ./source/n/curl/cacert.pem.bz2 +-rw-r--r-- 1 root root 2097637 2010-04-14 14:57 ./source/n/curl/curl-7.20.1.tar.bz2 +-rw-r--r-- 1 root root 198 2010-04-14 14:57 ./source/n/curl/curl-7.20.1.tar.bz2.asc +-rwxr-xr-x 1 root root 3798 2010-03-05 20:12 ./source/n/curl/curl.SlackBuild -rw-r--r-- 1 root root 1010 2008-02-11 03:44 ./source/n/curl/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/cyrus-sasl -rw-r--r-- 1 root root 906552 2009-05-14 13:48 ./source/n/cyrus-sasl/cyrus-sasl-2.1.23.tar.xz @@ -6760,30 +7131,28 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/cyrus-sasl -rw-r--r-- 1 root root 275 2005-07-24 22:43 ./source/n/cyrus-sasl/doinst.sh.gz -rw-r--r-- 1 root root 580 2005-07-25 00:10 ./source/n/cyrus-sasl/rc.saslauthd.gz -rw-r--r-- 1 root root 836 2005-04-18 23:31 ./source/n/cyrus-sasl/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-15 19:29 ./source/n/dhcp --rw-r--r-- 1 root root 792355 2009-07-14 17:00 ./source/n/dhcp/dhcp-3.1.2p1.tar.gz --rw-r--r-- 1 root root 479 2009-07-14 17:02 ./source/n/dhcp/dhcp-3.1.2p1.tar.gz.asc --rwxr-xr-x 1 root root 3430 2009-07-14 21:57 ./source/n/dhcp/dhcp.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-03 15:15 ./source/n/dhcp +-rw-r--r-- 1 root root 337 2010-03-03 15:15 ./source/n/dhcp/dhclient-script.PATH.diff.gz +-rw-r--r-- 1 root root 763332 2010-01-18 20:24 ./source/n/dhcp/dhcp-4.1.1.tar.xz +-rwxr-xr-x 1 root root 4787 2010-03-03 15:16 ./source/n/dhcp/dhcp.SlackBuild +-rw-r--r-- 1 root root 311 2009-11-12 05:15 ./source/n/dhcp/doinst.sh.gz -rw-r--r-- 1 root root 1099 2002-02-27 02:14 ./source/n/dhcp/slack-desc -drwxr-xr-x 3 root root 4096 2009-05-23 02:24 ./source/n/dhcpcd +drwxr-xr-x 2 root root 4096 2010-04-02 17:50 ./source/n/dhcpcd +-rw-r--r-- 1 root root 456 2009-09-12 05:37 ./source/n/dhcpcd/50-ntp.conf.diff.gz -rw-r--r-- 1 root root 759 2009-03-09 04:20 ./source/n/dhcpcd/COPYRIGHT.gz --rw-r--r-- 1 root root 45030 2008-08-26 03:12 ./source/n/dhcpcd/dhcpcd-3.2.3.tar.bz2 --rwxr-xr-x 1 root root 4495 2009-05-19 20:05 ./source/n/dhcpcd/dhcpcd.SlackBuild --rw-r--r-- 1 root root 442 2008-11-07 00:15 ./source/n/dhcpcd/dhcpcd.vararg.diff.gz -drwxr-xr-x 2 root root 4096 2009-03-07 01:36 ./source/n/dhcpcd/patches --rw-r--r-- 1 root root 311 2009-03-06 20:55 ./source/n/dhcpcd/patches/config.h.diff.gz --rw-r--r-- 1 root root 258 2009-03-07 01:36 ./source/n/dhcpcd/patches/dhcpcd.8.in.diff.gz --rw-r--r-- 1 root root 391 2009-03-07 01:24 ./source/n/dhcpcd/patches/dhcpcd.sh.diff.gz +-rw-r--r-- 1 root root 67625 2010-03-31 08:50 ./source/n/dhcpcd/dhcpcd-5.2.2.tar.bz2 +-rwxr-xr-x 1 root root 3809 2010-02-09 03:37 ./source/n/dhcpcd/dhcpcd.SlackBuild +-rw-r--r-- 1 root root 265 2009-07-24 16:30 ./source/n/dhcpcd/doinst.sh.gz -rw-r--r-- 1 root root 900 2008-04-10 21:01 ./source/n/dhcpcd/slack-desc drwxr-xr-x 2 root root 4096 2009-07-04 06:54 ./source/n/dirmngr -rw-r--r-- 1 root root 556184 2009-06-18 02:19 ./source/n/dirmngr/dirmngr-1.0.3.tar.bz2 --rwxr-xr-x 1 root root 2976 2009-07-15 01:45 ./source/n/dirmngr/dirmngr.SlackBuild +-rwxr-xr-x 1 root root 3672 2010-03-05 20:25 ./source/n/dirmngr/dirmngr.SlackBuild -rw-r--r-- 1 root root 952 2007-03-15 20:48 ./source/n/dirmngr/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-01 03:46 ./source/n/dnsmasq --rw-r--r-- 1 root root 310593 2009-06-10 19:55 ./source/n/dnsmasq/dnsmasq-2.49.tar.bz2 --rwxr-xr-x 1 root root 2877 2009-07-01 03:46 ./source/n/dnsmasq/dnsmasq.SlackBuild --rw-r--r-- 1 root root 472 2009-02-19 23:51 ./source/n/dnsmasq/dnsmasq.leasedir.diff.gz --rw-r--r-- 1 root root 302 2005-10-16 20:00 ./source/n/dnsmasq/doinst.sh.gz +drwxr-xr-x 2 root root 4096 2010-02-11 21:45 ./source/n/dnsmasq +-rw-r--r-- 1 root root 305908 2010-01-22 20:16 ./source/n/dnsmasq/dnsmasq-2.52.tar.xz +-rwxr-xr-x 1 root root 3574 2010-02-11 21:46 ./source/n/dnsmasq/dnsmasq.SlackBuild +-rw-r--r-- 1 root root 543 2010-01-22 21:33 ./source/n/dnsmasq/dnsmasq.leasedir.diff.gz +-rw-r--r-- 1 root root 376 2010-01-22 21:37 ./source/n/dnsmasq/doinst.sh.gz -rw-r--r-- 1 root root 265 2005-10-16 20:02 ./source/n/dnsmasq/rc.dnsmasq.gz -rw-r--r-- 1 root root 854 2005-10-16 20:03 ./source/n/dnsmasq/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/elm @@ -6791,45 +7160,47 @@ drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/elm -rwxr-xr-x 1 root root 2597 2009-08-13 19:06 ./source/n/elm/elm.SlackBuild -rw-r--r-- 1 root root 481431 2005-08-18 13:25 ./source/n/elm/elm2.5.8.tar.bz2 -rw-r--r-- 1 root root 678 2002-03-05 02:32 ./source/n/elm/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/epic4 --rw-r--r-- 1 root root 628431 2007-09-18 02:33 ./source/n/epic4/epic4-2.8.tar.bz2 --rw-r--r-- 1 root root 240554 2007-05-09 21:41 ./source/n/epic4/epic4-help-20070509.tar.bz2 --rwxr-xr-x 1 root root 2754 2009-05-23 00:41 ./source/n/epic4/epic4.SlackBuild --rw-r--r-- 1 root root 777 2002-03-23 23:48 ./source/n/epic4/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/ethtool --rw-r--r-- 1 root root 129849 2007-07-26 17:43 ./source/n/ethtool/ethtool-6.tar.gz --rwxr-xr-x 1 root root 1857 2009-05-19 20:05 ./source/n/ethtool/ethtool.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-17 18:59 ./source/n/epic5 +-rw-r--r-- 1 root root 249636 2005-03-16 01:15 ./source/n/epic5/epic-help-current.tar.xz +-rw-r--r-- 1 root root 711512 2010-05-01 04:02 ./source/n/epic5/epic5-1.1.2.tar.xz +-rwxr-xr-x 1 root root 3351 2010-05-17 19:00 ./source/n/epic5/epic5.SlackBuild +-rw-r--r-- 1 root root 777 2010-05-17 18:46 ./source/n/epic5/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-03 01:27 ./source/n/ethtool +-rw-r--r-- 1 root root 155173 2010-02-25 03:23 ./source/n/ethtool/ethtool-2.6.33.tar.gz +-rwxr-xr-x 1 root root 2167 2010-05-03 01:28 ./source/n/ethtool/ethtool.SlackBuild -rw-r--r-- 1 root root 899 2007-04-29 22:26 ./source/n/ethtool/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-06 04:28 ./source/n/fetchmail --rw-r--r-- 1 root root 1608923 2009-08-06 04:27 ./source/n/fetchmail/fetchmail-6.3.11.tar.bz2 --rw-r--r-- 1 root root 197 2009-08-06 04:26 ./source/n/fetchmail/fetchmail-6.3.11.tar.bz2.asc --rwxr-xr-x 1 root root 2889 2009-08-06 04:49 ./source/n/fetchmail/fetchmail.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-16 05:40 ./source/n/fetchmail +-rw-r--r-- 1 root root 1642598 2010-05-16 05:23 ./source/n/fetchmail/fetchmail-6.3.17.tar.bz2 +-rw-r--r-- 1 root root 198 2010-05-16 05:23 ./source/n/fetchmail/fetchmail-6.3.17.tar.bz2.asc +-rwxr-xr-x 1 root root 3283 2010-05-03 01:33 ./source/n/fetchmail/fetchmail.SlackBuild -rw-r--r-- 1 root root 1067 2007-05-07 03:49 ./source/n/fetchmail/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-22 19:54 ./source/n/getmail --rw-r--r-- 1 root root 153548 2009-08-08 20:30 ./source/n/getmail/getmail-4.11.0.tar.gz --rwxr-xr-x 1 root root 1702 2009-08-22 19:55 ./source/n/getmail/getmail.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 01:46 ./source/n/getmail +-rw-r--r-- 1 root root 156472 2010-04-30 21:48 ./source/n/getmail/getmail-4.17.0.tar.gz +-rwxr-xr-x 1 root root 2052 2010-05-03 01:46 ./source/n/getmail/getmail.SlackBuild -rw-r--r-- 1 root root 821 2003-09-10 04:59 ./source/n/getmail/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/gnupg --rw-r--r-- 1 root root 3328743 2008-03-26 17:46 ./source/n/gnupg/gnupg-1.4.9.tar.bz2 --rw-r--r-- 1 root root 158 2008-03-26 17:46 ./source/n/gnupg/gnupg-1.4.9.tar.bz2.sig --rwxr-xr-x 1 root root 2789 2009-05-19 20:05 ./source/n/gnupg/gnupg.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-05 23:41 ./source/n/gnupg +-rw-r--r-- 1 root root 3410814 2009-09-02 16:50 ./source/n/gnupg/gnupg-1.4.10.tar.bz2 +-rw-r--r-- 1 root root 158 2009-09-02 16:50 ./source/n/gnupg/gnupg-1.4.10.tar.bz2.sig +-rwxr-xr-x 1 root root 3383 2010-03-05 23:41 ./source/n/gnupg/gnupg.SlackBuild -rw-r--r-- 1 root root 827 2003-02-25 23:37 ./source/n/gnupg/slack-desc.gnupg -drwxr-xr-x 2 root root 4096 2009-07-04 06:55 ./source/n/gnupg2 --rw-r--r-- 1 root root 3924196 2009-06-18 02:18 ./source/n/gnupg2/gnupg-2.0.12.tar.bz2 --rwxr-xr-x 1 root root 4371 2009-07-15 01:46 ./source/n/gnupg2/gnupg2.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-06 00:40 ./source/n/gnupg2 +-rw-r--r-- 1 root root 1016 2010-02-01 09:21 ./source/n/gnupg2/gnupg-2.0.14-encode-s2k.patch.gz +-rw-r--r-- 1 root root 2727084 2009-12-21 17:22 ./source/n/gnupg2/gnupg-2.0.14.tar.xz +-rwxr-xr-x 1 root root 5256 2010-03-06 00:41 ./source/n/gnupg2/gnupg2.SlackBuild -rw-r--r-- 1 root root 1058 2008-02-11 03:44 ./source/n/gnupg2/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/gnutls --rw-r--r-- 1 root root 3970240 2009-04-30 10:34 ./source/n/gnutls/gnutls-2.6.6.tar.xz --rwxr-xr-x 1 root root 3257 2009-05-23 00:41 ./source/n/gnutls/gnutls.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-10 20:13 ./source/n/gnutls +-rw-r--r-- 1 root root 4298056 2010-03-15 13:00 ./source/n/gnutls/gnutls-2.8.6.tar.xz +-rwxr-xr-x 1 root root 3953 2010-04-10 20:14 ./source/n/gnutls/gnutls.SlackBuild -rw-r--r-- 1 root root 950 2007-03-16 01:33 ./source/n/gnutls/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/gpa -rw-r--r-- 1 root root 270 2007-03-16 00:41 ./source/n/gpa/doinst.sh.gz -rw-r--r-- 1 root root 564252 2007-03-06 14:54 ./source/n/gpa/gpa-0.7.5.tar.bz2 -rwxr-xr-x 1 root root 2771 2009-05-19 20:05 ./source/n/gpa/gpa.SlackBuild -rw-r--r-- 1 root root 741 2007-03-15 20:46 ./source/n/gpa/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/gpgme --rw-r--r-- 1 root root 827069 2009-01-13 04:06 ./source/n/gpgme/gpgme-1.1.8.tar.bz2 --rwxr-xr-x 1 root root 2722 2009-05-19 20:05 ./source/n/gpgme/gpgme.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-06 01:03 ./source/n/gpgme +-rw-r--r-- 1 root root 845063 2009-06-18 16:27 ./source/n/gpgme/gpgme-1.2.0.tar.bz2 +-rw-r--r-- 1 root root 315 2009-06-18 16:27 ./source/n/gpgme/gpgme-1.2.0.tar.bz2.sig +-rwxr-xr-x 1 root root 3334 2010-03-06 01:03 ./source/n/gpgme/gpgme.SlackBuild -rw-r--r-- 1 root root 995 2007-03-15 20:46 ./source/n/gpgme/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/htdig -rw-r--r-- 1 root root 274 2007-04-07 22:58 ./source/n/htdig/doinst.sh.gz @@ -6838,13 +7209,13 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/htdig -rwxr-xr-x 1 root root 4079 2009-05-19 20:05 ./source/n/htdig/htdig.SlackBuild -rw-r--r-- 1 root root 288 2007-05-02 18:02 ./source/n/htdig/htdig.conf.diff.gz -rw-r--r-- 1 root root 891 2007-04-07 18:26 ./source/n/htdig/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-10 19:07 ./source/n/httpd +drwxr-xr-x 2 root root 4096 2010-03-08 19:35 ./source/n/httpd -rw-r--r-- 1 root root 1409 2007-05-18 22:51 ./source/n/httpd/README -rw-r--r-- 1 root root 439 2007-06-05 19:38 ./source/n/httpd/config.layout.diff.gz -rw-r--r-- 1 root root 702 2008-07-24 20:29 ./source/n/httpd/doinst.sh.gz --rw-r--r-- 1 root root 5300199 2009-08-06 07:46 ./source/n/httpd/httpd-2.2.13.tar.bz2 --rw-r--r-- 1 root root 835 2009-08-06 07:46 ./source/n/httpd/httpd-2.2.13.tar.bz2.asc --rwxr-xr-x 1 root root 6445 2009-08-10 19:07 ./source/n/httpd/httpd.SlackBuild +-rw-r--r-- 1 root root 4959582 2010-03-05 21:13 ./source/n/httpd/httpd-2.2.15.tar.bz2 +-rw-r--r-- 1 root root 835 2010-03-05 21:13 ./source/n/httpd/httpd-2.2.15.tar.bz2.asc +-rwxr-xr-x 1 root root 6761 2010-03-08 19:35 ./source/n/httpd/httpd.SlackBuild -rw-r--r-- 1 root root 214 2007-05-18 20:56 ./source/n/httpd/httpd.nossldefault.diff.gz -rw-r--r-- 1 root root 237 2008-02-14 21:36 ./source/n/httpd/httpd.runasapache.diff.gz -rw-r--r-- 1 root root 159 2007-05-23 18:30 ./source/n/httpd/logrotate.httpd @@ -6862,17 +7233,16 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/inetd -rwxr-xr-x 1 root root 2134 2009-05-19 20:05 ./source/n/inetd/inetd.SlackBuild -rw-r--r-- 1 root root 889 2003-09-06 23:32 ./source/n/inetd/inetd.loopingdos.diff.gz -rw-r--r-- 1 root root 910 2002-03-22 02:34 ./source/n/inetd/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/iproute2 +drwxr-xr-x 2 root root 4096 2010-03-02 21:29 ./source/n/iproute2 -rw-r--r-- 1 root root 305 2008-10-04 01:56 ./source/n/iproute2/doinst.sh.gz --rw-r--r-- 1 root root 367905 2009-03-24 22:16 ./source/n/iproute2/iproute2-2.6.29-1.tar.bz2 --rw-r--r-- 1 root root 72 2009-03-24 22:16 ./source/n/iproute2/iproute2-2.6.29-1.tar.bz2.sig --rwxr-xr-x 1 root root 4196 2009-06-17 18:55 ./source/n/iproute2/iproute2.SlackBuild --rw-r--r-- 1 root root 269 2008-10-04 01:34 ./source/n/iproute2/iproute2.dbpath.diff.gz --rw-r--r-- 1 root root 250 2008-10-04 01:38 ./source/n/iproute2/iproute2.iptablespath.diff.gz +-rw-r--r-- 1 root root 502 2010-02-25 05:02 ./source/n/iproute2/iproute2-2.6.33-fixup_dbpath_and_iptablespath.diff.gz +-rw-r--r-- 1 root root 375000 2010-02-25 03:53 ./source/n/iproute2/iproute2-2.6.33.tar.bz2 +-rw-r--r-- 1 root root 197 2010-02-25 03:53 ./source/n/iproute2/iproute2-2.6.33.tar.bz2.sig +-rwxr-xr-x 1 root root 4347 2010-03-02 21:29 ./source/n/iproute2/iproute2.SlackBuild -rw-r--r-- 1 root root 937 2004-06-12 22:12 ./source/n/iproute2/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-12 22:57 ./source/n/iptables --rw-r--r-- 1 root root 432131 2009-04-06 11:22 ./source/n/iptables/iptables-1.4.3.2.tar.bz2 --rwxr-xr-x 1 root root 3080 2009-06-12 22:58 ./source/n/iptables/iptables.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-02 18:48 ./source/n/iptables +-rw-r--r-- 1 root root 462420 2010-03-01 14:25 ./source/n/iptables/iptables-1.4.7.tar.bz2 +-rwxr-xr-x 1 root root 3448 2010-02-09 00:35 ./source/n/iptables/iptables.SlackBuild -rw-r--r-- 1 root root 1129 2006-09-03 06:14 ./source/n/iptables/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/iptraf -rw-r--r-- 1 root root 575169 2005-09-13 09:27 ./source/n/iptraf/iptraf-3.0.0.tar.gz @@ -6880,28 +7250,33 @@ drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/iptraf -rw-r--r-- 1 root root 341 2003-03-14 21:41 ./source/n/iptraf/iptraf.paths.diff.gz -rw-r--r-- 1 root root 13181 2007-09-29 11:02 ./source/n/iptraf/iptraf_3.0.0-6.diff.gz -rw-r--r-- 1 root root 1006 2008-02-11 03:44 ./source/n/iptraf/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/iputils --rw-r--r-- 1 root root 88678 2007-02-02 13:01 ./source/n/iputils/iputils-s20070202.tar.bz2 --rwxr-xr-x 1 root root 3052 2009-05-19 20:05 ./source/n/iputils/iputils.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-10 08:01 ./source/n/iputils +-rw-r--r-- 1 root root 94237 2010-04-18 04:45 ./source/n/iputils/iputils-s20100418.tar.bz2 +-rwxr-xr-x 1 root root 3461 2010-05-10 08:07 ./source/n/iputils/iputils.SlackBuild -rw-r--r-- 1 root root 881 2007-04-30 00:45 ./source/n/iputils/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/ipw2100-fw -rw-r--r-- 1 root root 177519 2008-03-09 04:43 ./source/n/ipw2100-fw/ipw2100-fw-1.3.tar.bz2 -rwxr-xr-x 1 root root 2935 2009-05-19 20:05 ./source/n/ipw2100-fw/ipw2100-fw.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/ipw2200-fw --rw-r--r-- 1 root root 174695 2008-03-10 20:39 ./source/n/ipw2200-fw/ipw2200-fw-3.0.tar.bz2 --rwxr-xr-x 1 root root 2801 2009-05-19 20:05 ./source/n/ipw2200-fw/ipw2200-fw.SlackBuild -drwxr-xr-x 2 root root 4096 2009-07-30 20:54 ./source/n/irssi +drwxr-xr-x 2 root root 4096 2010-05-03 03:32 ./source/n/ipw2200-fw +-rw-r--r-- 1 root root 118152 2010-05-03 02:47 ./source/n/ipw2200-fw/ipw2200-fw-3.1.tar.xz +-rwxr-xr-x 1 root root 2807 2010-05-03 03:32 ./source/n/ipw2200-fw/ipw2200-fw.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-22 03:45 ./source/n/irssi -rw-r--r-- 1 root root 264 2009-07-29 00:34 ./source/n/irssi/doinst.sh.gz --rw-r--r-- 1 root root 370 2009-07-30 20:54 ./source/n/irssi/irsi-0.8.14.manpage_fix.diff.gz --rw-r--r-- 1 root root 944708 2009-07-29 00:13 ./source/n/irssi/irssi-0.8.14.tar.bz2 --rw-r--r-- 1 root root 197 2009-07-29 00:12 ./source/n/irssi/irssi-0.8.14.tar.bz2.sig --rwxr-xr-x 1 root root 3989 2009-07-30 20:54 ./source/n/irssi/irssi.SlackBuild +-rw-r--r-- 1 root root 948847 2010-04-22 03:29 ./source/n/irssi/irssi-0.8.15.tar.bz2 +-rw-r--r-- 1 root root 72 2010-04-22 03:29 ./source/n/irssi/irssi-0.8.15.tar.bz2.sig +-rwxr-xr-x 1 root root 4504 2010-04-22 03:51 ./source/n/irssi/irssi.SlackBuild +-rw-r--r-- 1 root root 371 2009-10-12 20:24 ./source/n/irssi/irssi.manpage_fix.diff.gz +-rw-r--r-- 1 root root 402 2010-04-22 03:39 ./source/n/irssi/irssi.ssl_proxy.diff.gz -rw-r--r-- 1 root root 789 2003-12-13 20:28 ./source/n/irssi/slack-desc drwxr-xr-x 2 root root 4096 2009-06-12 23:54 ./source/n/iw -rw-r--r-- 1 root root 33326 2009-06-12 23:54 ./source/n/iw/iw-0.9.14.tar.bz2 -rwxr-xr-x 1 root root 2488 2009-06-12 23:54 ./source/n/iw/iw.SlackBuild -rw-r--r-- 1 root root 132 2009-04-01 01:22 ./source/n/iw/iw.info -rw-r--r-- 1 root root 883 2009-04-01 01:20 ./source/n/iw/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-03 03:34 ./source/n/iwlwifi-1000-ucode +-rw-r--r-- 1 root root 115416 2010-05-03 02:50 ./source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode-128.50.3.1.tar.xz +-rwxr-xr-x 1 root root 2049 2010-05-03 03:35 ./source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode.SlackBuild +-rw-r--r-- 1 root root 953 2010-05-03 03:38 ./source/n/iwlwifi-1000-ucode/slack-desc drwxr-xr-x 2 root root 4096 2009-06-13 03:20 ./source/n/iwlwifi-3945-ucode -rw-r--r-- 1 root root 65335 2008-10-21 17:38 ./source/n/iwlwifi-3945-ucode/iwlwifi-3945-ucode-15.28.1.8.tar.bz2 -rw-r--r-- 1 root root 65524 2009-06-13 00:05 ./source/n/iwlwifi-3945-ucode/iwlwifi-3945-ucode-15.32.2.9.tar.bz2 @@ -6921,46 +7296,52 @@ drwxr-xr-x 2 root root 4096 2009-06-13 03:34 ./source/n/iwlwifi-5150-ucode -rw-r--r-- 1 root root 144943 2009-06-13 00:05 ./source/n/iwlwifi-5150-ucode/iwlwifi-5150-ucode-8.24.2.2.tar.bz2 -rwxr-xr-x 1 root root 2037 2009-06-13 03:34 ./source/n/iwlwifi-5150-ucode/iwlwifi-5150-ucode.SlackBuild -rw-r--r-- 1 root root 978 2009-06-13 03:35 ./source/n/iwlwifi-5150-ucode/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-12 23:14 ./source/n/lftp +drwxr-xr-x 2 root root 4096 2010-05-03 03:40 ./source/n/iwlwifi-6000-ucode +-rw-r--r-- 1 root root 137148 2010-05-03 02:50 ./source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode-9.193.4.1.tar.xz +-rwxr-xr-x 1 root root 2049 2010-05-03 03:40 ./source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode.SlackBuild +-rw-r--r-- 1 root root 953 2010-05-03 03:43 ./source/n/iwlwifi-6000-ucode/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-30 00:20 ./source/n/lftp -rw-r--r-- 1 root root 263 2009-05-31 06:11 ./source/n/lftp/doinst.sh.gz --rw-r--r-- 1 root root 1490470 2009-05-15 06:44 ./source/n/lftp/lftp-3.7.14.tar.bz2 --rwxr-xr-x 1 root root 3071 2009-06-12 22:11 ./source/n/lftp/lftp.SlackBuild +-rw-r--r-- 1 root root 1596521 2010-04-29 11:02 ./source/n/lftp/lftp-4.0.7.tar.bz2 +-rwxr-xr-x 1 root root 3784 2010-02-09 04:00 ./source/n/lftp/lftp.SlackBuild -rw-r--r-- 1 root root 1037 2002-04-06 20:20 ./source/n/lftp/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/libassuan --rw-r--r-- 1 root root 297123 2007-12-12 16:15 ./source/n/libassuan/libassuan-1.0.4.tar.bz2 --rw-r--r-- 1 root root 152 2007-12-12 16:15 ./source/n/libassuan/libassuan-1.0.4.tar.bz2.sig --rwxr-xr-x 1 root root 2747 2009-05-19 20:05 ./source/n/libassuan/libassuan.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-06 00:54 ./source/n/libassuan +-rw-r--r-- 1 root root 297786 2008-05-25 08:02 ./source/n/libassuan/libassuan-1.0.5.tar.bz2 +-rw-r--r-- 1 root root 158 2008-05-25 08:02 ./source/n/libassuan/libassuan-1.0.5.tar.bz2.sig +-rwxr-xr-x 1 root root 3281 2010-03-06 00:54 ./source/n/libassuan/libassuan.SlackBuild -rw-r--r-- 1 root root 712 2007-03-15 20:46 ./source/n/libassuan/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/libgcrypt --rw-r--r-- 1 root root 1143139 2009-03-23 15:11 ./source/n/libgcrypt/libgcrypt-1.4.4.tar.bz2 --rwxr-xr-x 1 root root 2840 2009-05-19 20:05 ./source/n/libgcrypt/libgcrypt.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-06 00:34 ./source/n/libgcrypt +-rw-r--r-- 1 root root 1148382 2009-12-11 15:58 ./source/n/libgcrypt/libgcrypt-1.4.5.tar.bz2 +-rw-r--r-- 1 root root 158 2009-12-11 15:58 ./source/n/libgcrypt/libgcrypt-1.4.5.tar.bz2.sig +-rwxr-xr-x 1 root root 3806 2010-05-05 05:37 ./source/n/libgcrypt/libgcrypt.SlackBuild -rw-r--r-- 1 root root 705 2007-03-15 20:47 ./source/n/libgcrypt/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/libgpg-error -rw-r--r-- 1 root root 403751 2009-01-13 04:56 ./source/n/libgpg-error/libgpg-error-1.7.tar.bz2 --rwxr-xr-x 1 root root 2716 2009-05-19 20:05 ./source/n/libgpg-error/libgpg-error.SlackBuild +-rwxr-xr-x 1 root root 3701 2010-05-05 05:42 ./source/n/libgpg-error/libgpg-error.SlackBuild -rw-r--r-- 1 root root 856 2007-03-15 20:47 ./source/n/libgpg-error/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-04 06:52 ./source/n/libksba --rw-r--r-- 1 root root 569181 2009-06-18 02:20 ./source/n/libksba/libksba-1.0.6.tar.bz2 --rwxr-xr-x 1 root root 2786 2009-07-15 01:45 ./source/n/libksba/libksba.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-06 00:32 ./source/n/libksba +-rw-r--r-- 1 root root 569854 2009-07-03 09:50 ./source/n/libksba/libksba-1.0.7.tar.bz2 +-rw-r--r-- 1 root root 158 2009-07-03 09:50 ./source/n/libksba/libksba-1.0.7.tar.bz2.sig +-rwxr-xr-x 1 root root 3484 2010-03-06 00:33 ./source/n/libksba/libksba.SlackBuild -rw-r--r-- 1 root root 790 2007-03-15 20:47 ./source/n/libksba/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/links --rw-r--r-- 1 root root 3832115 2008-09-29 15:15 ./source/n/links/links-2.2.tar.bz2 --rwxr-xr-x 1 root root 2963 2009-05-19 20:05 ./source/n/links/links.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-18 20:45 ./source/n/links +-rw-r--r-- 1 root root 3832651 2010-01-30 20:30 ./source/n/links/links-2.3pre1.tar.bz2 +-rwxr-xr-x 1 root root 3561 2010-02-18 20:46 ./source/n/links/links.SlackBuild -rw-r--r-- 1 root root 902 2003-08-19 20:03 ./source/n/links/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/lynx --rwxr-xr-x 1 root root 3810 2009-05-23 00:41 ./source/n/lynx/lynx.SlackBuild --rw-r--r-- 1 root root 305 2002-02-27 07:24 ./source/n/lynx/lynx.cfg.diff.gz --rw-r--r-- 1 root root 514 2007-02-10 20:13 ./source/n/lynx/lynx.path.diff.gz --rw-r--r-- 1 root root 2290787 2007-05-10 00:29 ./source/n/lynx/lynx2.8.6rel.5.tar.bz2 +drwxr-xr-x 2 root root 4096 2010-02-12 01:54 ./source/n/lynx +-rwxr-xr-x 1 root root 4439 2010-02-12 01:56 ./source/n/lynx/lynx.SlackBuild +-rw-r--r-- 1 root root 355 2009-12-03 21:36 ./source/n/lynx/lynx.cfg.diff.gz +-rw-r--r-- 1 root root 573 2009-12-03 21:59 ./source/n/lynx/lynx.path.diff.gz +-rw-r--r-- 1 root root 2090248 2009-12-02 21:53 ./source/n/lynx/lynx2.8.7.tar.xz -rw-r--r-- 1 root root 953 2002-02-27 06:50 ./source/n/lynx/slack-desc drwxr-xr-x 2 root root 4096 2009-08-10 23:26 ./source/n/mailx -rw-r--r-- 1 root root 281 2006-09-20 05:36 ./source/n/mailx/doinst.sh.gz -rw-r--r-- 1 root root 271482 2008-07-28 22:39 ./source/n/mailx/mailx-12.4.tar.bz2 -rwxr-xr-x 1 root root 3124 2009-08-11 01:02 ./source/n/mailx/mailx.SlackBuild -rw-r--r-- 1 root root 1023 2008-04-11 02:52 ./source/n/mailx/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/mcabber --rw-r--r-- 1 root root 492360 2008-10-09 20:18 ./source/n/mcabber/mcabber-0.9.9.tar.bz2 --rwxr-xr-x 1 root root 3156 2009-05-23 00:41 ./source/n/mcabber/mcabber.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-11 14:14 ./source/n/mcabber +-rw-r--r-- 1 root root 552111 2010-04-11 13:32 ./source/n/mcabber/mcabber-0.10.0.tar.bz2 +-rwxr-xr-x 1 root root 3928 2010-04-22 19:23 ./source/n/mcabber/mcabber.SlackBuild -rw-r--r-- 1 root root 876 2007-06-14 00:35 ./source/n/mcabber/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/metamail -rw-r--r-- 1 root root 125480 1994-02-18 21:07 ./source/n/metamail/metamail-2.7.tar.xz @@ -6968,10 +7349,9 @@ drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/metamail -rw-r--r-- 1 root root 20532 2009-04-23 21:04 ./source/n/metamail/metamail.automake.diff.xz -rw-r--r-- 1 root root 201660 2006-07-19 03:47 ./source/n/metamail/metamail_2.7-52.diff.xz -rw-r--r-- 1 root root 927 2002-03-23 23:50 ./source/n/metamail/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/mtr --rw-r--r-- 1 root root 362 2008-07-24 17:59 ./source/n/mtr/mtr-0.73.configure.error.diff.gz --rw-r--r-- 1 root root 460708 2008-04-07 16:32 ./source/n/mtr/mtr-0.73.tar.bz2 --rwxr-xr-x 1 root root 2840 2009-05-23 00:41 ./source/n/mtr/mtr.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 03:51 ./source/n/mtr +-rw-r--r-- 1 root root 137112 2008-09-19 09:38 ./source/n/mtr/mtr-0.75.tar.xz +-rwxr-xr-x 1 root root 3439 2010-05-03 03:51 ./source/n/mtr/mtr.SlackBuild -rw-r--r-- 1 root root 779 2007-06-04 22:06 ./source/n/mtr/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/mutt -rw-r--r-- 1 root root 264 2002-06-01 05:12 ./source/n/mutt/doinst.sh.gz @@ -6984,14 +7364,14 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/nc -rw-r--r-- 1 root root 641 2002-05-28 21:39 ./source/n/nc/nc.diff.gz -rw-r--r-- 1 root root 75267 2002-05-28 18:18 ./source/n/nc/nc110.tgz -rw-r--r-- 1 root root 1081 2002-05-28 21:54 ./source/n/nc/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/ncftp --rw-r--r-- 1 root root 423140 2008-09-29 15:15 ./source/n/ncftp/ncftp-3.2.2-src.tar.bz2 --rwxr-xr-x 1 root root 2869 2009-05-23 00:41 ./source/n/ncftp/ncftp.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 05:21 ./source/n/ncftp +-rw-r--r-- 1 root root 450965 2010-04-07 23:24 ./source/n/ncftp/ncftp-3.2.4-src.tar.bz2 +-rwxr-xr-x 1 root root 3575 2010-05-03 05:25 ./source/n/ncftp/ncftp.SlackBuild -rw-r--r-- 1 root root 793 2008-02-11 03:44 ./source/n/ncftp/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/net-snmp +drwxr-xr-x 2 root root 4096 2009-10-12 20:48 ./source/n/net-snmp -rw-r--r-- 1 root root 344 2007-06-19 03:37 ./source/n/net-snmp/doinst.sh.gz --rw-r--r-- 1 root root 3734307 2008-10-31 16:17 ./source/n/net-snmp/net-snmp-5.4.2.1.tar.bz2 --rwxr-xr-x 1 root root 4235 2009-05-23 00:41 ./source/n/net-snmp/net-snmp.SlackBuild +-rw-r--r-- 1 root root 3271436 2009-09-24 03:07 ./source/n/net-snmp/net-snmp-5.5.tar.xz +-rwxr-xr-x 1 root root 5403 2010-02-10 20:22 ./source/n/net-snmp/net-snmp.SlackBuild -rw-r--r-- 1 root root 895 2007-06-19 03:36 ./source/n/net-snmp/rc.snmpd -rw-r--r-- 1 root root 910 2007-04-16 17:27 ./source/n/net-snmp/slack-desc -rw-r--r-- 1 root root 4909 2007-04-16 18:39 ./source/n/net-snmp/snmpd.conf.gz @@ -7003,14 +7383,14 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/net-tools -rw-r--r-- 1 root root 650 2001-03-22 05:23 ./source/n/net-tools/net-tools.diff.gz -rw-r--r-- 1 root root 173444 2007-12-02 05:47 ./source/n/net-tools/net-tools_1.60-19.diff.gz -rw-r--r-- 1 root root 909 2007-04-29 19:40 ./source/n/net-tools/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-06 22:35 ./source/n/netatalk +drwxr-xr-x 2 root root 4096 2010-02-09 05:57 ./source/n/netatalk -rw-r--r-- 1 root root 0 2003-02-02 04:37 ./source/n/netatalk/afppasswd -rw-r--r-- 1 root root 334 2009-05-31 04:29 ./source/n/netatalk/doinst.sh.gz --rw-r--r-- 1 root root 320 2009-05-31 04:20 ./source/n/netatalk/netatalk-2.0.4-afpdconf.diff.gz --rw-r--r-- 1 root root 486 2009-05-31 04:12 ./source/n/netatalk/netatalk-2.0.4-without_xfs.diff.gz --rw-r--r-- 1 root root 771008 2009-05-30 20:22 ./source/n/netatalk/netatalk-2.0.4.tar.xz --rwxr-xr-x 1 root root 4317 2009-08-11 00:20 ./source/n/netatalk/netatalk.SlackBuild +-rw-r--r-- 1 root root 776632 2009-11-11 22:39 ./source/n/netatalk/netatalk-2.0.5.tar.xz +-rwxr-xr-x 1 root root 4694 2010-02-09 05:58 ./source/n/netatalk/netatalk.SlackBuild +-rw-r--r-- 1 root root 320 2009-05-31 04:20 ./source/n/netatalk/netatalk.afpdconf.diff.gz -rw-r--r-- 1 root root 292 2004-10-28 18:43 ./source/n/netatalk/netatalk.etc2ps.diff.gz +-rw-r--r-- 1 root root 486 2009-05-31 04:12 ./source/n/netatalk/netatalk.without_xfs.diff.gz -rw-r--r-- 1 root root 1032 2003-02-02 03:47 ./source/n/netatalk/rc.atalk.new -rw-r--r-- 1 root root 1040 2003-02-02 00:09 ./source/n/netatalk/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/netdate @@ -7082,8 +7462,8 @@ drwxr-xr-x 4 root root 4096 2008-12-06 21:40 ./source/n/network-scripts drwxr-xr-x 2 root root 4096 2009-08-05 18:51 ./source/n/network-scripts/manpages -rw-r--r-- 1 root root 3299 2009-08-05 18:51 ./source/n/network-scripts/manpages/rc.inet1.8 -rw-r--r-- 1 root root 5525 2009-08-05 18:51 ./source/n/network-scripts/manpages/rc.inet1.conf.5 --rwxr-xr-x 1 root root 2468 2009-08-25 04:38 ./source/n/network-scripts/network-scripts.SlackBuild -drwxr-xr-x 2 root root 4096 2009-08-05 18:51 ./source/n/network-scripts/scripts +-rwxr-xr-x 1 root root 2465 2010-01-18 23:53 ./source/n/network-scripts/network-scripts.SlackBuild +drwxr-xr-x 2 root root 4096 2009-08-26 14:25 ./source/n/network-scripts/scripts -rw-r--r-- 1 root root 21 1999-01-28 01:15 ./source/n/network-scripts/scripts/HOSTNAME -rw-r--r-- 1 root root 27 1994-07-07 15:39 ./source/n/network-scripts/scripts/host.conf -rw-r--r-- 1 root root 627 2003-08-27 01:07 ./source/n/network-scripts/scripts/hosts @@ -7094,7 +7474,7 @@ drwxr-xr-x 2 root root 4096 2009-08-05 18:51 ./source/n/network-scripts/sc -rw-r--r-- 1 root root 233 1999-10-07 05:21 ./source/n/network-scripts/scripts/networks -rw-r--r-- 1 root root 24 1998-02-09 02:21 ./source/n/network-scripts/scripts/nntpserver -rw-r--r-- 1 root root 5748 2002-02-10 09:01 ./source/n/network-scripts/scripts/protocols --rw-r--r-- 1 root root 9579 2009-08-25 04:37 ./source/n/network-scripts/scripts/rc.inet1 +-rw-r--r-- 1 root root 9600 2009-08-26 14:25 ./source/n/network-scripts/scripts/rc.inet1 -rw-r--r-- 1 root root 4752 2009-08-25 04:37 ./source/n/network-scripts/scripts/rc.inet1.conf -rw-r--r-- 1 root root 4847 2007-09-17 22:07 ./source/n/network-scripts/scripts/rc.inet2 -rw-r--r-- 1 root root 2684 2008-12-03 22:58 ./source/n/network-scripts/scripts/rc.ip_forward @@ -7110,83 +7490,94 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/newspost -rw-r--r-- 1 root root 61412 2003-05-05 14:28 ./source/n/newspost/newspost-2.1.1.tar.gz -rwxr-xr-x 1 root root 2139 2009-05-19 20:05 ./source/n/newspost/newspost.SlackBuild -rw-r--r-- 1 root root 970 2003-07-18 22:21 ./source/n/newspost/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/nfs-utils +drwxr-xr-x 2 root root 4096 2010-05-03 05:41 ./source/n/nfs-utils -rw-r--r-- 1 root root 1177 2007-05-17 23:17 ./source/n/nfs-utils/_nfs-utils.tar.gz --rw-r--r-- 1 root root 588368 2008-10-17 15:08 ./source/n/nfs-utils/nfs-utils-1.1.4.tar.bz2 --rw-r--r-- 1 root root 248 2008-10-17 15:08 ./source/n/nfs-utils/nfs-utils-1.1.4.tar.bz2.sign --rwxr-xr-x 1 root root 4767 2009-05-19 20:05 ./source/n/nfs-utils/nfs-utils.SlackBuild +-rw-r--r-- 1 root root 721051 2010-02-18 13:03 ./source/n/nfs-utils/nfs-utils-1.2.2.tar.bz2 +-rw-r--r-- 1 root root 248 2010-02-18 13:03 ./source/n/nfs-utils/nfs-utils-1.2.2.tar.bz2.sign +-rwxr-xr-x 1 root root 5061 2010-05-03 05:37 ./source/n/nfs-utils/nfs-utils.SlackBuild -rw-r--r-- 1 root root 255 2008-03-31 22:19 ./source/n/nfs-utils/nfs-utils.lwrap.needs.lnsl.diff.gz -rw-r--r-- 1 root root 2457 2008-03-31 22:23 ./source/n/nfs-utils/rc.nfsd -rw-r--r-- 1 root root 782 2003-02-02 05:38 ./source/n/nfs-utils/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-17 05:00 ./source/n/nmap --rw-r--r-- 1 root root 7987808 2009-07-16 16:04 ./source/n/nmap/nmap-5.00.tar.xz --rwxr-xr-x 1 root root 4166 2009-07-17 05:03 ./source/n/nmap/nmap.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 05:43 ./source/n/nmap +-rw-r--r-- 1 root root 8844904 2010-02-24 21:01 ./source/n/nmap/nmap-5.21.tar.xz +-rwxr-xr-x 1 root root 4775 2010-05-03 05:45 ./source/n/nmap/nmap.SlackBuild -rw-r--r-- 1 root root 302 2009-04-30 22:29 ./source/n/nmap/nmap.ndiff.mandir.diff.gz -rw-r--r-- 1 root root 1107 2002-03-29 08:29 ./source/n/nmap/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/nn +drwxr-xr-x 2 root root 4096 2009-11-12 00:21 ./source/n/nn -rw-r--r-- 1 root root 4844 2001-07-02 05:31 ./source/n/nn/NNTP.gz -rw-r--r-- 1 root root 315 2006-06-27 21:55 ./source/n/nn/doinst.sh.gz +-rw-r--r-- 1 root root 509 2009-11-11 21:28 ./source/n/nn/m-x86_64.h.gz -rw-r--r-- 1 root root 352656 2005-11-18 13:08 ./source/n/nn/nn-6.7.3.tar.bz2 --rwxr-xr-x 1 root root 3608 2009-05-23 00:41 ./source/n/nn/nn.SlackBuild +-rwxr-xr-x 1 root root 4072 2009-11-12 00:23 ./source/n/nn/nn.SlackBuild -rw-r--r-- 1 root root 287 2006-06-27 22:14 ./source/n/nn/nn.badnntphost.diff.gz -rw-r--r-- 1 root root 1349 2009-03-17 00:18 ./source/n/nn/nn.destdir.diff.gz --rw-r--r-- 1 root root 905 2006-06-27 21:33 ./source/n/nn/nn.diff.gz +-rw-r--r-- 1 root root 1281 2009-11-11 21:16 ./source/n/nn/nn.diff.gz -rw-r--r-- 1 root root 53 2006-06-27 21:53 ./source/n/nn/nntpserver.gz -rw-r--r-- 1 root root 897 2002-03-29 01:23 ./source/n/nn/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-03 21:06 ./source/n/ntp +drwxr-xr-x 2 root root 4096 2010-04-22 04:38 ./source/n/ntp -rw-r--r-- 1 root root 314 2007-05-07 04:51 ./source/n/ntp/doinst.sh.gz --rw-r--r-- 1 root root 2144620 2009-05-18 09:53 ./source/n/ntp/ntp-4.2.4p7.tar.xz --rwxr-xr-x 1 root root 3454 2009-06-03 21:06 ./source/n/ntp/ntp.SlackBuild +-rw-r--r-- 1 root root 2798304 2010-04-09 08:28 ./source/n/ntp/ntp-4.2.6p1.tar.xz +-rwxr-xr-x 1 root root 4676 2010-04-22 04:52 ./source/n/ntp/ntp.SlackBuild -rw-r--r-- 1 root root 1664 2007-05-07 04:46 ./source/n/ntp/ntp.conf -rw-r--r-- 1 root root 22 1999-10-07 19:50 ./source/n/ntp/ntp.keys --rw-r--r-- 1 root root 749 2008-11-22 06:11 ./source/n/ntp/rc.ntpd +-rw-r--r-- 1 root root 269 2010-04-22 04:38 ./source/n/ntp/ntp.nano.diff.gz +-rw-r--r-- 1 root root 804 2010-04-22 04:31 ./source/n/ntp/rc.ntpd -rw-r--r-- 1 root root 986 2002-02-27 23:02 ./source/n/ntp/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/obexftp +drwxr-xr-x 2 root root 4096 2009-11-25 04:57 ./source/n/obex-data-server +-rw-r--r-- 1 root root 297 2009-11-25 04:57 ./source/n/obex-data-server/doinst.sh.gz +-rw-r--r-- 1 root root 148937 2009-11-24 01:47 ./source/n/obex-data-server/obex-data-server-0.4.5.tar.bz2 +-rwxr-xr-x 1 root root 3646 2010-05-02 07:24 ./source/n/obex-data-server/obex-data-server.SlackBuild +-rw-r--r-- 1 root root 897 2009-11-25 04:59 ./source/n/obex-data-server/slack-desc +drwxr-xr-x 2 root root 4096 2009-12-13 22:25 ./source/n/obexfs +-rw-r--r-- 1 root root 68953 2009-11-24 01:46 ./source/n/obexfs/obexfs-0.12.tar.bz2 +-rwxr-xr-x 1 root root 3359 2010-05-02 07:29 ./source/n/obexfs/obexfs.SlackBuild +-rw-r--r-- 1 root root 876 2009-11-25 04:42 ./source/n/obexfs/slack-desc +drwxr-xr-x 2 root root 4096 2010-04-17 15:59 ./source/n/obexftp -rw-r--r-- 1 root root 402552 2009-02-17 18:54 ./source/n/obexftp/obexftp-0.23.tar.bz2 --rwxr-xr-x 1 root root 4208 2009-05-19 20:05 ./source/n/obexftp/obexftp.SlackBuild +-rwxr-xr-x 1 root root 4787 2010-05-02 07:25 ./source/n/obexftp/obexftp.SlackBuild +-rw-r--r-- 1 root root 281 2010-04-19 18:20 ./source/n/obexftp/ruby_rstringlen.diff.gz -rw-r--r-- 1 root root 924 2007-05-18 03:09 ./source/n/obexftp/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/openldap-client +drwxr-xr-x 2 root root 4096 2010-02-12 03:50 ./source/n/openldap-client -rw-r--r-- 1 root root 275 2006-01-17 21:18 ./source/n/openldap-client/doinst.sh.gz --rw-r--r-- 1 root root 2957466 2008-07-17 04:35 ./source/n/openldap-client/openldap-2.3.43.tar.bz2 --rwxr-xr-x 1 root root 3857 2009-05-19 20:05 ./source/n/openldap-client/openldap-client.SlackBuild +-rw-r--r-- 1 root root 3547408 2009-12-20 17:42 ./source/n/openldap-client/openldap-2.4.21.tar.xz +-rwxr-xr-x 1 root root 4558 2010-02-12 04:05 ./source/n/openldap-client/openldap-client.SlackBuild -rw-r--r-- 1 root root 1027 2006-01-18 01:55 ./source/n/openldap-client/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/openobex --rw-r--r-- 1 root root 254656 2006-06-14 12:04 ./source/n/openobex/openobex-1.3.tar.bz2 --rwxr-xr-x 1 root root 3326 2009-05-19 20:05 ./source/n/openobex/openobex.SlackBuild +drwxr-xr-x 2 root root 4096 2009-12-28 05:27 ./source/n/openobex +-rw-r--r-- 1 root root 290891 2009-02-08 18:35 ./source/n/openobex/openobex-1.5.tar.bz2 +-rwxr-xr-x 1 root root 3972 2010-05-02 07:14 ./source/n/openobex/openobex.SlackBuild -rw-r--r-- 1 root root 997 2007-05-12 23:06 ./source/n/openobex/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/n/openssh +drwxr-xr-x 2 root root 4096 2010-04-16 13:56 ./source/n/openssh -rw-r--r-- 1 root root 470 2006-09-28 21:11 ./source/n/openssh/doinst.sh.gz --rw-r--r-- 1 root root 816807 2009-02-23 00:26 ./source/n/openssh/openssh-5.2p1.tar.bz2 --rwxr-xr-x 1 root root 4419 2009-05-23 00:41 ./source/n/openssh/openssh.SlackBuild +-rw-r--r-- 1 root root 1097574 2010-04-16 00:32 ./source/n/openssh/openssh-5.5p1.tar.gz +-rw-r--r-- 1 root root 187 2010-04-16 00:32 ./source/n/openssh/openssh-5.5p1.tar.gz.asc +-rwxr-xr-x 1 root root 5052 2010-04-16 13:58 ./source/n/openssh/openssh.SlackBuild -rw-r--r-- 1 root root 1477 2007-04-02 00:05 ./source/n/openssh/rc.sshd -rw-r--r-- 1 root root 1134 2002-03-07 23:03 ./source/n/openssh/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/openssl +drwxr-xr-x 2 root root 4096 2010-03-29 22:36 ./source/n/openssl -rw-r--r-- 1 root root 1727 2007-06-13 04:45 ./source/n/openssl/certwatch.gz -rw-r--r-- 1 root root 281 2007-06-13 17:20 ./source/n/openssl/doinst.sh-openssl-solibs.gz -rw-r--r-- 1 root root 336 2007-06-13 04:52 ./source/n/openssl/doinst.sh-openssl.gz --rw-r--r-- 1 root root 3058579 2009-03-25 12:21 ./source/n/openssl/openssl-0.9.8k.tar.bz2 --rwxr-xr-x 1 root root 5330 2009-05-19 20:05 ./source/n/openssl/openssl.SlackBuild --rw-r--r-- 1 root root 362 2009-04-16 09:10 ./source/n/openssl/openssl.no-extssl.diff.gz +-rw-r--r-- 1 root root 2415264 2010-03-24 13:25 ./source/n/openssl/openssl-0.9.8n.tar.xz +-rwxr-xr-x 1 root root 6342 2010-03-29 22:36 ./source/n/openssl/openssl.SlackBuild -rw-r--r-- 1 root root 501 2006-01-17 23:28 ./source/n/openssl/openssl.optsx86.diff.gz -rw-r--r-- 1 root root 283 2005-10-13 03:02 ./source/n/openssl/openssl.soname.diff.gz -rw-r--r-- 1 root root 1019 2002-04-06 20:23 ./source/n/openssl/slack-desc.openssl -rw-r--r-- 1 root root 1143 2002-03-23 22:11 ./source/n/openssl/slack-desc.openssl-solibs -drwxr-xr-x 2 root root 4096 2009-05-23 02:26 ./source/n/openvpn +drwxr-xr-x 2 root root 4096 2010-05-03 05:55 ./source/n/openvpn -rw-r--r-- 1 root root 1375 2007-06-10 01:25 ./source/n/openvpn/README --rw-r--r-- 1 root root 669076 2006-10-01 12:44 ./source/n/openvpn/openvpn-2.0.9.tar.gz --rw-r--r-- 1 root root 189 2006-10-01 12:48 ./source/n/openvpn/openvpn-2.0.9.tar.gz.asc --rwxr-xr-x 1 root root 3987 2009-05-19 20:05 ./source/n/openvpn/openvpn.SlackBuild +-rw-r--r-- 1 root root 880115 2009-12-12 00:13 ./source/n/openvpn/openvpn-2.1.1.tar.gz +-rw-r--r-- 1 root root 189 2009-12-12 00:13 ./source/n/openvpn/openvpn-2.1.1.tar.gz.asc +-rwxr-xr-x 1 root root 4663 2010-05-03 05:59 ./source/n/openvpn/openvpn.SlackBuild -rw-r--r-- 1 root root 6942 2007-06-12 03:48 ./source/n/openvpn/openvpn.conf.sample -rw-r--r-- 1 root root 888 2007-06-10 01:23 ./source/n/openvpn/slack-desc -drwxr-xr-x 4 root root 4096 2009-07-11 21:00 ./source/n/php -drwxr-xr-x 2 root root 4096 2009-07-11 21:00 ./source/n/php/channels --rw-r--r-- 1 root root 1470 2009-04-04 22:17 ./source/n/php/channels/pear.php.net.reg --rw-r--r-- 1 root root 1576 2009-04-04 22:17 ./source/n/php/channels/pecl.php.net.reg +drwxr-xr-x 3 root root 4096 2010-03-21 20:58 ./source/n/php -rw-r--r-- 1 root root 151 2007-05-19 01:27 ./source/n/php/doinst.sh.gz --rw-r--r-- 1 root root 903 2007-09-08 20:16 ./source/n/php/mod_php.conf.example +-rw-r--r-- 1 root root 1022 2009-10-02 23:56 ./source/n/php/mod_php.conf.example drwxr-xr-x 2 root root 4096 2008-05-07 05:21 ./source/n/php/pear --rw-r--r-- 1 root root 8808759 2009-06-17 12:43 ./source/n/php/php-5.2.10.tar.bz2 --rwxr-xr-x 1 root root 8793 2009-07-11 21:17 ./source/n/php/php.SlackBuild +-rw-r--r-- 1 root root 6978964 2010-02-24 12:27 ./source/n/php/php-5.2.13.tar.xz +-rwxr-xr-x 1 root root 9340 2010-03-21 20:59 ./source/n/php/php.SlackBuild +-rw-r--r-- 1 root root 244 2010-03-21 20:44 ./source/n/php/php.gd_libpng-1.4.diff.gz +-rw-r--r-- 1 root root 268 2010-03-06 03:28 ./source/n/php/php.gmp5.diff.gz -rw-r--r-- 1 root root 1115 2007-06-29 04:43 ./source/n/php/php.ini.diff.gz -rw-r--r-- 1 root root 1120 2007-06-29 05:15 ./source/n/php/php.recommended.ini.diff.gz -rw-r--r-- 1 root root 830 2005-12-09 05:18 ./source/n/php/slack-desc @@ -7197,9 +7588,9 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/pidentd -rwxr-xr-x 1 root root 2837 2009-05-19 20:05 ./source/n/pidentd/pidentd.SlackBuild -rw-r--r-- 1 root root 893 2004-06-13 20:28 ./source/n/pidentd/pidentd.conf.diff.gz -rw-r--r-- 1 root root 1036 2002-04-06 00:20 ./source/n/pidentd/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-18 17:35 ./source/n/pinentry --rw-r--r-- 1 root root 382981 2009-06-19 01:07 ./source/n/pinentry/pinentry-0.7.6.tar.bz2 --rwxr-xr-x 1 root root 3453 2009-08-18 18:44 ./source/n/pinentry/pinentry.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-06 00:36 ./source/n/pinentry +-rw-r--r-- 1 root root 333112 2010-03-03 12:32 ./source/n/pinentry/pinentry-0.8.0.tar.xz +-rwxr-xr-x 1 root root 4087 2010-03-06 00:37 ./source/n/pinentry/pinentry.SlackBuild -rw-r--r-- 1 root root 781 2007-03-15 20:47 ./source/n/pinentry/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/popa3d -rw-r--r-- 1 root root 164 2006-09-30 23:56 ./source/n/popa3d/doinst.sh.gz @@ -7215,11 +7606,11 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/portmap -rw-r--r-- 1 root root 217 2007-05-17 22:45 ./source/n/portmap/portmap.lwrap.needs.lnsl.diff.gz -rw-r--r-- 1 root root 610 2007-05-17 22:51 ./source/n/portmap/rc.rpc.gz -rw-r--r-- 1 root root 987 2002-03-22 03:05 ./source/n/portmap/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/ppp +drwxr-xr-x 2 root root 4096 2009-11-18 04:02 ./source/n/ppp -rw-r--r-- 1 root root 324 2004-02-23 06:39 ./source/n/ppp/doinst.sh.gz -rw-r--r-- 1 root root 3620 1999-09-30 05:49 ./source/n/ppp/options.new.gz --rw-r--r-- 1 root root 555916 2006-06-28 00:30 ./source/n/ppp/ppp-2.4.4.tar.bz2 --rwxr-xr-x 1 root root 5071 2009-05-19 20:05 ./source/n/ppp/ppp.SlackBuild +-rw-r--r-- 1 root root 556120 2009-11-17 14:03 ./source/n/ppp/ppp-2.4.5.tar.bz2 +-rwxr-xr-x 1 root root 5443 2010-02-12 02:07 ./source/n/ppp/ppp.SlackBuild -rw-r--r-- 1 root root 401 2004-02-23 05:37 ./source/n/ppp/ppp.slack.diff.gz -rw-r--r-- 1 root root 348 2002-05-20 02:06 ./source/n/ppp/pppsetup-1.98.backupfiles.diff.gz -rw-r--r-- 1 root root 1303 2002-05-20 01:53 ./source/n/ppp/pppsetup-1.98.moredevs.diff.gz @@ -7239,42 +7630,57 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/procmail -rw-r--r-- 1 root root 277 2006-09-19 04:10 ./source/n/procmail/procmail.lfs.diff.gz -rw-r--r-- 1 root root 13073 2002-12-26 21:18 ./source/n/procmail/procmail_3.22-5.diff.gz -rw-r--r-- 1 root root 1146 2002-04-06 20:25 ./source/n/procmail/slack-desc -drwxr-xr-x 3 root root 4096 2009-05-23 00:41 ./source/n/proftpd --rw-r--r-- 1 root root 775 2006-11-28 21:19 ./source/n/proftpd/_proftpd.tar.gz +drwxr-xr-x 3 root root 4096 2010-02-26 20:05 ./source/n/proftpd -rw-r--r-- 1 root root 306 2003-03-06 07:52 ./source/n/proftpd/doinst.sh.gz drwxr-xr-x 2 root root 4096 2001-02-26 07:35 ./source/n/proftpd/etc -rw-r--r-- 1 root root 581 2001-02-26 07:31 ./source/n/proftpd/etc/ftpusers -rw-r--r-- 1 root root 2046 2008-07-29 18:18 ./source/n/proftpd/etc/proftpd.conf --rw-r--r-- 1 root root 2457498 2009-02-05 19:19 ./source/n/proftpd/proftpd-1.3.2.tar.bz2 --rw-r--r-- 1 root root 174 2009-02-05 19:19 ./source/n/proftpd/proftpd-1.3.2.tar.bz2.asc --rwxr-xr-x 1 root root 3647 2009-05-23 00:41 ./source/n/proftpd/proftpd.SlackBuild +-rw-r--r-- 1 root root 3594628 2010-02-24 18:17 ./source/n/proftpd/proftpd-1.3.3.tar.xz +-rwxr-xr-x 1 root root 4141 2010-03-29 23:32 ./source/n/proftpd/proftpd.SlackBuild -rw-r--r-- 1 root root 797 2004-09-18 22:48 ./source/n/proftpd/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/pssh --rw-r--r-- 1 root root 37742 2007-04-11 22:42 ./source/n/pssh/pssh-1.3.1.tar.gz --rwxr-xr-x 1 root root 2571 2009-05-19 20:05 ./source/n/pssh/pssh.SlackBuild --rw-r--r-- 1 root root 943 2007-06-27 06:25 ./source/n/pssh/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-03 06:05 ./source/n/pssh +-rw-r--r-- 1 root root 18366 2010-03-04 19:18 ./source/n/pssh/pssh-2.1.1.tar.gz +-rwxr-xr-x 1 root root 2844 2010-05-03 06:04 ./source/n/pssh/pssh.SlackBuild +-rw-r--r-- 1 root root 989 2010-05-03 06:05 ./source/n/pssh/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/pth -rw-r--r-- 1 root root 507518 2007-01-05 15:04 ./source/n/pth/pth-2.0.7.tar.bz2 -rwxr-xr-x 1 root root 3228 2009-05-19 20:05 ./source/n/pth/pth.SlackBuild -rw-r--r-- 1 root root 926 2007-03-15 20:48 ./source/n/pth/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/rdist --rw-r--r-- 1 root root 240 2002-02-14 22:34 ./source/n/rdist/_rdist.tar.gz --rw-r--r-- 1 root root 926 2006-08-12 21:24 ./source/n/rdist/rdist-6.1.5-bison.diff.gz --rw-r--r-- 1 root root 12148 2008-10-27 20:26 ./source/n/rdist/rdist-6.1.5-cleanup.diff.gz --rw-r--r-- 1 root root 230 2006-08-12 21:24 ./source/n/rdist/rdist-6.1.5-varargs.diff.gz --rw-r--r-- 1 root root 1244 2001-04-03 17:56 ./source/n/rdist/rdist-6.1.5.diff.gz +drwxr-xr-x 2 root root 4096 2010-01-25 21:40 ./source/n/rdist +-rw-r--r-- 1 root root 360 2004-09-09 11:08 ./source/n/rdist/rdist-6.1.5-00.linux.diff.gz +-rw-r--r-- 1 root root 836 2004-09-09 11:08 ./source/n/rdist/rdist-6.1.5-01.links.diff.gz +-rw-r--r-- 1 root root 419 2004-09-09 11:08 ./source/n/rdist/rdist-6.1.5-03.hardlink.diff.gz +-rw-r--r-- 1 root root 929 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-04.bison.diff.gz +-rw-r--r-- 1 root root 233 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-05.varargs.diff.gz +-rw-r--r-- 1 root root 271 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-06.maxargs.diff.gz +-rw-r--r-- 1 root root 1500 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-07.lfs.diff.gz +-rw-r--r-- 1 root root 12347 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-08.cleanup.diff.gz +-rw-r--r-- 1 root root 304 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-09.svr4.diff.gz +-rw-r--r-- 1 root root 253 2004-09-09 11:11 ./source/n/rdist/rdist-6.1.5-10.ssh.diff.gz +-rw-r--r-- 1 root root 419 2004-09-09 11:13 ./source/n/rdist/rdist-6.1.5-11.mkstemp.diff.gz +-rw-r--r-- 1 root root 963 2005-05-04 14:08 ./source/n/rdist/rdist-6.1.5-12.stat64.diff.gz +-rw-r--r-- 1 root root 462 2006-08-02 09:11 ./source/n/rdist/rdist-6.1.5-14.fix-msgsndnotify-loop.diff.gz -rw-r--r-- 1 root root 117861 2001-04-03 17:01 ./source/n/rdist/rdist-6.1.5.tar.gz --rwxr-xr-x 1 root root 2520 2009-05-19 20:05 ./source/n/rdist/rdist.SlackBuild +-rw-r--r-- 1 root root 5320 2004-09-09 11:08 ./source/n/rdist/rdist-eu-license.txt +-rwxr-xr-x 1 root root 3705 2010-01-25 21:41 ./source/n/rdist/rdist.SlackBuild -rw-r--r-- 1 root root 811 2008-02-11 03:44 ./source/n/rdist/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/rp-pppoe -rw-r--r-- 1 root root 307 2005-09-03 17:27 ./source/n/rp-pppoe/doinst.sh.gz -rw-r--r-- 1 root root 215288 2008-06-30 14:01 ./source/n/rp-pppoe/rp-pppoe-3.10.tar.gz -rwxr-xr-x 1 root root 2574 2009-05-19 20:05 ./source/n/rp-pppoe/rp-pppoe.SlackBuild -rw-r--r-- 1 root root 958 2002-04-15 04:13 ./source/n/rp-pppoe/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/rsync --rw-r--r-- 1 root root 561172 2009-05-08 17:43 ./source/n/rsync/rsync-3.0.6.tar.xz --rwxr-xr-x 1 root root 2680 2009-08-11 06:30 ./source/n/rsync/rsync.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-01 01:31 ./source/n/rsync +-rw-r--r-- 1 root root 563476 2009-12-31 21:20 ./source/n/rsync/rsync-3.0.7.tar.xz +-rwxr-xr-x 1 root root 3053 2010-03-01 01:32 ./source/n/rsync/rsync.SlackBuild -rw-r--r-- 1 root root 950 2008-02-11 03:44 ./source/n/rsync/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-16 22:55 ./source/n/rt2860-firmware +-rw-r--r-- 1 root root 4479 2010-05-14 18:50 ./source/n/rt2860-firmware/RT2860_Firmware_V26.zip +-rwxr-xr-x 1 root root 2009 2010-05-16 22:59 ./source/n/rt2860-firmware/rt2860-firmware.SlackBuild +-rw-r--r-- 1 root root 916 2010-05-16 23:04 ./source/n/rt2860-firmware/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-16 23:02 ./source/n/rt2870-firmware +-rw-r--r-- 1 root root 3570 2010-05-14 18:50 ./source/n/rt2870-firmware/RT2870_Firmware_V22.zip +-rwxr-xr-x 1 root root 2009 2010-05-16 23:02 ./source/n/rt2870-firmware/rt2870-firmware.SlackBuild +-rw-r--r-- 1 root root 807 2010-05-16 23:04 ./source/n/rt2870-firmware/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/rt61-firmware -rw-r--r-- 1 root root 13937 2008-03-10 10:04 ./source/n/rt61-firmware/RT61_Firmware_V1.2.zip -rwxr-xr-x 1 root root 1994 2009-05-19 20:05 ./source/n/rt61-firmware/rt61-firmware.SlackBuild @@ -7283,58 +7689,59 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/rt71w-firmware -rw-r--r-- 1 root root 2679 2008-03-10 10:04 ./source/n/rt71w-firmware/RT71W_Firmware_V1.8.zip -rwxr-xr-x 1 root root 1997 2009-05-19 20:05 ./source/n/rt71w-firmware/rt71w-firmware.SlackBuild -rw-r--r-- 1 root root 752 2008-03-10 10:26 ./source/n/rt71w-firmware/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-26 02:06 ./source/n/samba +drwxr-xr-x 2 root root 4096 2010-04-26 02:33 ./source/n/samba -rw-r--r-- 1 root root 374 2003-03-07 21:49 ./source/n/samba/doinst.sh.gz -rw-r--r-- 1 root root 791 2003-10-01 04:12 ./source/n/samba/rc.samba --rw-r--r-- 1 root root 10268584 2009-06-26 02:05 ./source/n/samba/samba-3.2.13.tar.xz --rwxr-xr-x 1 root root 6466 2009-07-11 20:28 ./source/n/samba/samba.SlackBuild +-rw-r--r-- 1 root root 5691556 2010-04-26 02:32 ./source/n/samba/samba-3.5.2.tar.xz +-rwxr-xr-x 1 root root 7075 2010-04-26 02:48 ./source/n/samba/samba.SlackBuild -rw-r--r-- 1 root root 1011 2002-03-06 04:53 ./source/n/samba/slack-desc --rw-r--r-- 1 root root 9672 2008-05-28 18:53 ./source/n/samba/smb.conf.default --rw-r--r-- 1 root root 9684 2008-05-28 12:41 ./source/n/samba/smb.conf.default.orig --rw-r--r-- 1 root root 523 2008-05-28 18:58 ./source/n/samba/smb.conf.diff.gz -drwxr-xr-x 2 root root 4096 2009-06-26 19:34 ./source/n/sendmail +-rw-r--r-- 1 root root 9671 2009-10-03 20:59 ./source/n/samba/smb.conf.default +-rw-r--r-- 1 root root 9683 2009-09-30 12:17 ./source/n/samba/smb.conf.default.orig +-rw-r--r-- 1 root root 528 2009-10-03 20:59 ./source/n/samba/smb.conf.diff.gz +drwxr-xr-x 2 root root 4096 2010-04-22 01:43 ./source/n/sendmail -rw-r--r-- 1 root root 799 2008-04-12 05:48 ./source/n/sendmail/Build.gz -rwxr-xr-x 1 root root 63 2008-11-26 21:58 ./source/n/sendmail/SlackBuild --rwxr-xr-x 1 root root 5418 2009-06-26 19:59 ./source/n/sendmail/SlackBuild-sendmail --rwxr-xr-x 1 root root 2104 2009-06-26 19:29 ./source/n/sendmail/SlackBuild-sendmail-cf +-rwxr-xr-x 1 root root 5734 2010-04-22 01:44 ./source/n/sendmail/SlackBuild-sendmail +-rwxr-xr-x 1 root root 2104 2010-04-22 01:44 ./source/n/sendmail/SlackBuild-sendmail-cf -rw-r--r-- 1 root root 4793 2009-06-26 19:34 ./source/n/sendmail/_sendmail.tar.gz -rw-r--r-- 1 root root 224 2002-02-14 01:48 ./source/n/sendmail/linux.uucp.mc -rw-r--r-- 1 root root 2742 2008-04-12 06:41 ./source/n/sendmail/sendmail-slackware-tls-sasl.mc -rw-r--r-- 1 root root 2510 2008-04-12 07:06 ./source/n/sendmail/sendmail-slackware-tls.mc -rw-r--r-- 1 root root 1825 2003-05-05 03:34 ./source/n/sendmail/sendmail-slackware.mc --rw-r--r-- 1 root root 2069209 2008-05-03 16:56 ./source/n/sendmail/sendmail.8.14.3.tar.gz --rw-r--r-- 1 root root 152 2008-05-03 16:56 ./source/n/sendmail/sendmail.8.14.3.tar.gz.sig --rw-r--r-- 1 root root 429 2008-04-12 06:42 ./source/n/sendmail/site.config.m4 +-rw-r--r-- 1 root root 2080472 2009-12-29 05:14 ./source/n/sendmail/sendmail.8.14.4.tar.gz +-rw-r--r-- 1 root root 152 2009-12-29 05:14 ./source/n/sendmail/sendmail.8.14.4.tar.gz.sig +-rw-r--r-- 1 root root 467 2010-04-22 23:21 ./source/n/sendmail/site.config.m4 -rw-r--r-- 1 root root 962 2002-06-01 20:17 ./source/n/sendmail/slack-desc.sendmail -rw-r--r-- 1 root root 1050 2002-06-01 20:19 ./source/n/sendmail/slack-desc.sendmail-cf -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/slrn --rw-r--r-- 1 root root 264 2008-10-25 19:10 ./source/n/slrn/doinst.sh.gz +drwxr-xr-x 2 root root 4096 2010-05-19 02:27 ./source/n/slrn +-rw-r--r-- 1 root root 280 2010-05-19 02:27 ./source/n/slrn/doinst.sh.gz -rw-r--r-- 1 root root 764 2008-11-11 20:39 ./source/n/slrn/slack-desc -rw-r--r-- 1 root root 1040218 2008-10-25 19:16 ./source/n/slrn/slrn-0.9.9p1.tar.bz2 --rwxr-xr-x 1 root root 3480 2009-05-19 20:05 ./source/n/slrn/slrn.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/snownews +-rwxr-xr-x 1 root root 3834 2010-05-19 02:26 ./source/n/slrn/slrn.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 01:09 ./source/n/snownews -rw-r--r-- 1 root root 874 2009-05-17 03:56 ./source/n/snownews/slack-desc --rw-r--r-- 1 root root 172814 2009-03-19 12:16 ./source/n/snownews/snownews-1.5.11.tar.gz --rw-r--r-- 1 root root 194 2009-03-19 12:17 ./source/n/snownews/snownews-1.5.11.tar.gz.asc --rwxr-xr-x 1 root root 2888 2009-07-17 23:02 ./source/n/snownews/snownews.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/stunnel +-rw-r--r-- 1 root root 167944 2009-09-17 06:44 ./source/n/snownews/snownews-1.5.12.tar.gz +-rw-r--r-- 1 root root 194 2009-09-17 06:46 ./source/n/snownews/snownews-1.5.12.tar.gz.asc +-rwxr-xr-x 1 root root 3588 2010-05-03 01:12 ./source/n/snownews/snownews.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 06:39 ./source/n/stunnel -rw-r--r-- 1 root root 265 2005-01-09 07:05 ./source/n/stunnel/doinst.sh.gz -rw-r--r-- 1 root root 290 2003-08-28 23:32 ./source/n/stunnel/generate-stunnel-key.sh -rw-r--r-- 1 root root 968 2003-08-28 23:04 ./source/n/stunnel/slack-desc --rw-r--r-- 1 root root 507158 2006-09-10 21:13 ./source/n/stunnel/stunnel-4.17.tar.gz --rw-r--r-- 1 root root 189 2006-09-10 21:13 ./source/n/stunnel/stunnel-4.17.tar.gz.asc --rwxr-xr-x 1 root root 3448 2009-05-19 20:05 ./source/n/stunnel/stunnel.SlackBuild +-rw-r--r-- 1 root root 560103 2010-04-05 18:50 ./source/n/stunnel/stunnel-4.33.tar.gz +-rw-r--r-- 1 root root 189 2010-04-05 18:50 ./source/n/stunnel/stunnel-4.33.tar.gz.asc +-rwxr-xr-x 1 root root 4376 2010-05-03 06:39 ./source/n/stunnel/stunnel.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/tcp_wrappers -rw-r--r-- 1 root root 1112 2007-04-29 22:11 ./source/n/tcp_wrappers/slack-desc -rwxr-xr-x 1 root root 3004 2009-05-19 20:05 ./source/n/tcp_wrappers/tcp_wrappers.SlackBuild -rw-r--r-- 1 root root 118844 2004-02-22 22:48 ./source/n/tcp_wrappers/tcp_wrappers_7.6.tar.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/tcpdump +drwxr-xr-x 2 root root 4096 2009-11-23 20:10 ./source/n/tcpdump -rw-r--r-- 1 root root 524273 2008-10-28 18:36 ./source/n/tcpdump/libpcap-1.0.0.tar.gz -rw-r--r-- 1 root root 65 2008-10-28 18:36 ./source/n/tcpdump/libpcap-1.0.0.tar.gz.sig +-rw-r--r-- 1 root root 1942 2009-11-23 20:08 ./source/n/tcpdump/libpcap.20-fix-any-intf.diff.gz -rw-r--r-- 1 root root 832 2008-02-11 03:44 ./source/n/tcpdump/slack-desc -rw-r--r-- 1 root root 708774 2008-10-28 18:03 ./source/n/tcpdump/tcpdump-4.0.0.tar.gz -rw-r--r-- 1 root root 65 2008-10-28 18:36 ./source/n/tcpdump/tcpdump-4.0.0.tar.gz.sig --rwxr-xr-x 1 root root 3756 2009-05-19 20:05 ./source/n/tcpdump/tcpdump.SlackBuild +-rwxr-xr-x 1 root root 4367 2009-11-23 21:02 ./source/n/tcpdump/tcpdump.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/n/telnet -rw-r--r-- 1 root root 522 2001-08-09 19:36 ./source/n/telnet/netkit-telnet-0.17-ayt.patch.gz -rw-r--r-- 1 root root 176 2001-02-26 02:21 ./source/n/telnet/netkit-telnet-0.17.diff.gz @@ -7344,22 +7751,20 @@ drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/n/telnet -rw-r--r-- 1 root root 869 2002-03-22 04:41 ./source/n/telnet/telnet-OpenBSD-20020321.diff.gz -rw-r--r-- 1 root root 104068 2002-03-22 04:19 ./source/n/telnet/telnet-OpenBSD-20020321.tar.gz -rwxr-xr-x 1 root root 2681 2009-05-23 00:42 ./source/n/telnet/telnet.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/tftp-hpa +drwxr-xr-x 2 root root 4096 2010-05-03 06:41 ./source/n/tftp-hpa -rw-r--r-- 1 root root 1015 2007-04-29 21:07 ./source/n/tftp-hpa/slack-desc --rw-r--r-- 1 root root 83818 2007-01-30 23:52 ./source/n/tftp-hpa/tftp-hpa-0.48.tar.bz2 --rw-r--r-- 1 root root 248 2007-01-30 23:52 ./source/n/tftp-hpa/tftp-hpa-0.48.tar.bz2.sign --rwxr-xr-x 1 root root 2411 2009-05-19 20:05 ./source/n/tftp-hpa/tftp-hpa.SlackBuild +-rw-r--r-- 1 root root 91829 2008-10-20 22:09 ./source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2 +-rw-r--r-- 1 root root 248 2008-10-20 22:09 ./source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2.sign +-rwxr-xr-x 1 root root 2781 2010-05-03 06:43 ./source/n/tftp-hpa/tftp-hpa.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/n/tin -rw-r--r-- 1 root root 944 2002-03-06 05:36 ./source/n/tin/slack-desc -rw-r--r-- 1 root root 1436706 2006-04-25 12:23 ./source/n/tin/tin-1.8.2.tar.bz2 -rw-r--r-- 1 root root 286 2006-04-25 12:30 ./source/n/tin/tin-1.8.2.tar.bz2.sign -rwxr-xr-x 1 root root 2927 2009-05-23 00:42 ./source/n/tin/tin.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/traceroute +drwxr-xr-x 2 root root 4096 2010-05-10 08:25 ./source/n/traceroute -rw-r--r-- 1 root root 969 2002-03-16 05:59 ./source/n/traceroute/slack-desc --rw-r--r-- 1 root root 74917 2000-12-18 09:38 ./source/n/traceroute/traceroute-1.4a12.tar.gz --rwxr-xr-x 1 root root 2658 2009-05-19 20:05 ./source/n/traceroute/traceroute.SlackBuild --rw-r--r-- 1 root root 529 2003-02-04 11:41 ./source/n/traceroute/traceroute.no.domain.strip.diff.gz --rw-r--r-- 1 root root 9503 2001-07-16 09:30 ./source/n/traceroute/traceroute_1.4a12-5.diff.gz +-rw-r--r-- 1 root root 64063 2010-04-27 12:03 ./source/n/traceroute/traceroute-2.0.14.tar.gz +-rwxr-xr-x 1 root root 2967 2010-05-10 08:27 ./source/n/traceroute/traceroute.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/n/trn -rw-r--r-- 1 root root 5599 1998-10-26 17:07 ./source/n/trn/_trn.tar.gz -rw-r--r-- 1 root root 1697 2002-03-07 02:29 ./source/n/trn/config.sh.gz @@ -7377,52 +7782,51 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/vlan -rw-r--r-- 1 root root 888 2007-04-29 22:43 ./source/n/vlan/slack-desc -rw-r--r-- 1 root root 132059 2005-10-20 09:17 ./source/n/vlan/vlan.1.9.tar.bz2 -rwxr-xr-x 1 root root 2054 2009-05-19 20:05 ./source/n/vlan/vlan.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-31 05:49 ./source/n/vsftpd +drwxr-xr-x 2 root root 4096 2009-11-18 04:55 ./source/n/vsftpd -rw-r--r-- 1 root root 283 2009-02-19 17:05 ./source/n/vsftpd/doinst.sh.gz -rw-r--r-- 1 root root 953 2004-09-03 18:38 ./source/n/vsftpd/slack-desc --rw-r--r-- 1 root root 142708 2009-05-30 20:15 ./source/n/vsftpd/vsftpd-2.1.2.tar.xz --rwxr-xr-x 1 root root 2995 2009-06-06 21:25 ./source/n/vsftpd/vsftpd.SlackBuild +-rw-r--r-- 1 root root 185562 2009-11-18 04:54 ./source/n/vsftpd/vsftpd-2.2.2.tar.gz +-rwxr-xr-x 1 root root 3399 2010-02-09 21:51 ./source/n/vsftpd/vsftpd.SlackBuild -rw-r--r-- 1 root root 198 2004-09-03 18:41 ./source/n/vsftpd/vsftpd.builddefs.diff.gz --rw-r--r-- 1 root root 965 2009-03-30 03:09 ./source/n/vsftpd/vsftpd.conf.diff.gz +-rw-r--r-- 1 root root 950 2009-10-19 15:22 ./source/n/vsftpd/vsftpd.conf.diff.gz -rw-r--r-- 1 root root 115 2004-09-03 18:59 ./source/n/vsftpd/vsftpd.log.gz --rw-r--r-- 1 root root 859 2009-05-31 05:42 ./source/n/vsftpd/vsftpd.vsf_findlibs.sh.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/wget +drwxr-xr-x 2 root root 4096 2009-12-03 22:13 ./source/n/wget -rw-r--r-- 1 root root 264 2008-10-01 23:27 ./source/n/wget/doinst.sh.gz -rw-r--r-- 1 root root 853 2002-03-23 23:56 ./source/n/wget/slack-desc --rw-r--r-- 1 root root 954561 2008-09-29 15:17 ./source/n/wget/wget-1.11.4.tar.bz2 --rwxr-xr-x 1 root root 2627 2009-05-19 20:05 ./source/n/wget/wget.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/whois +-rw-r--r-- 1 root root 1217348 2009-12-02 21:55 ./source/n/wget/wget-1.12.tar.xz +-rwxr-xr-x 1 root root 3368 2010-02-09 21:44 ./source/n/wget/wget.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-29 02:19 ./source/n/whois -rw-r--r-- 1 root root 841 2004-06-13 00:33 ./source/n/whois/slack-desc --rwxr-xr-x 1 root root 2436 2009-05-19 20:05 ./source/n/whois/whois.SlackBuild --rw-r--r-- 1 root root 67809 2008-04-06 18:47 ./source/n/whois/whois_4.7.26.tar.gz -drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/n/wireless-tools +-rwxr-xr-x 1 root root 2496 2010-04-29 02:25 ./source/n/whois/whois.SlackBuild +-rw-r--r-- 1 root root 78755 2010-04-11 03:51 ./source/n/whois/whois_5.0.2.tar.gz +drwxr-xr-x 3 root root 4096 2009-04-27 18:32 ./source/n/wireless-tools -rw-r--r-- 1 root root 389 2007-05-10 01:04 ./source/n/wireless-tools/doinst.sh.gz -drwxr-xr-x 2 root root 4096 2007-05-19 05:44 ./source/n/wireless-tools/scripts --rw-r--r-- 1 root root 12494 2009-04-27 18:31 ./source/n/wireless-tools/scripts/rc.wireless +drwxr-xr-x 2 root root 4096 2010-01-03 00:09 ./source/n/wireless-tools/scripts +-rw-r--r-- 1 root root 12835 2010-01-03 00:03 ./source/n/wireless-tools/scripts/rc.wireless -rw-r--r-- 1 root root 7320 2007-05-09 17:42 ./source/n/wireless-tools/scripts/rc.wireless.conf -rw-r--r-- 1 root root 1147 2006-04-30 01:08 ./source/n/wireless-tools/slack-desc -rw-r--r-- 1 root root 294417 2007-09-18 00:23 ./source/n/wireless-tools/wireless_tools.29.tar.gz --rwxr-xr-x 1 root root 3481 2009-05-19 20:05 ./source/n/wireless-tools/wireless_tools.SlackBuild +-rwxr-xr-x 1 root root 3755 2010-01-03 00:09 ./source/n/wireless-tools/wireless_tools.SlackBuild -rw-r--r-- 1 root root 227 2005-07-14 05:20 ./source/n/wireless-tools/wireless_tools.nowhine.diff.gz -rw-r--r-- 1 root root 287 2005-07-25 07:19 ./source/n/wireless-tools/wireless_tools.static.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/n/wpa_supplicant +drwxr-xr-x 2 root root 4096 2010-02-20 06:44 ./source/n/wpa_supplicant -rw-r--r-- 1 root root 2080 2005-08-06 20:17 ./source/n/wpa_supplicant/README.slackware -rw-r--r-- 1 root root 1067 2008-02-28 05:38 ./source/n/wpa_supplicant/slack-desc -rw-r--r-- 1 root root 5124 2009-04-20 18:10 ./source/n/wpa_supplicant/wpa_gui.png --rw-r--r-- 1 root root 889610 2009-04-20 14:30 ./source/n/wpa_supplicant/wpa_supplicant-0.6.9.tar.bz2 --rwxr-xr-x 1 root root 7323 2009-05-23 00:42 ./source/n/wpa_supplicant/wpa_supplicant.SlackBuild +-rw-r--r-- 1 root root 800524 2010-01-12 16:36 ./source/n/wpa_supplicant/wpa_supplicant-0.6.10.tar.xz +-rwxr-xr-x 1 root root 7697 2010-02-20 06:45 ./source/n/wpa_supplicant/wpa_supplicant.SlackBuild -rw-r--r-- 1 root root 500 2009-04-20 14:56 ./source/n/wpa_supplicant/wpa_supplicant.defconfig -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/yptools +drwxr-xr-x 2 root root 4096 2010-05-03 06:49 ./source/n/yptools -rw-r--r-- 1 root root 616 2000-11-24 23:39 ./source/n/yptools/nsswitch.conf-nis.gz -rw-r--r-- 1 root root 922 2002-05-31 06:11 ./source/n/yptools/rc.yp.gz -rw-r--r-- 1 root root 865 2002-03-05 19:13 ./source/n/yptools/slack-desc --rw-r--r-- 1 root root 159315 2004-06-21 12:32 ./source/n/yptools/yp-tools-2.9.tar.bz2 --rw-r--r-- 1 root root 248 2004-06-21 12:32 ./source/n/yptools/yp-tools-2.9.tar.bz2.sign --rw-r--r-- 1 root root 159660 2005-07-03 16:54 ./source/n/yptools/ypbind-mt-1.19.1.tar.bz2 --rw-r--r-- 1 root root 248 2005-07-03 16:54 ./source/n/yptools/ypbind-mt-1.19.1.tar.bz2.sign --rw-r--r-- 1 root root 172987 2005-07-20 13:37 ./source/n/yptools/ypserv-2.18.tar.bz2 --rw-r--r-- 1 root root 248 2005-07-20 13:37 ./source/n/yptools/ypserv-2.18.tar.bz2.sign --rwxr-xr-x 1 root root 9013 2009-05-19 20:05 ./source/n/yptools/yptools.SlackBuild +-rw-r--r-- 1 root root 204228 2010-04-21 09:59 ./source/n/yptools/yp-tools-2.12.tar.bz2 +-rw-r--r-- 1 root root 248 2010-04-21 09:59 ./source/n/yptools/yp-tools-2.12.tar.bz2.sign +-rw-r--r-- 1 root root 185910 2009-11-30 15:04 ./source/n/yptools/ypbind-mt-1.31.tar.bz2 +-rw-r--r-- 1 root root 248 2009-11-30 15:04 ./source/n/yptools/ypbind-mt-1.31.tar.bz2.sign +-rw-r--r-- 1 root root 200425 2010-02-23 14:03 ./source/n/yptools/ypserv-2.23.tar.bz2 +-rw-r--r-- 1 root root 248 2010-02-23 14:03 ./source/n/yptools/ypserv-2.23.tar.bz2.sign +-rwxr-xr-x 1 root root 9328 2010-05-03 06:50 ./source/n/yptools/yptools.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/n/ytalk -rw-r--r-- 1 root root 269 2006-02-03 23:28 ./source/n/ytalk/doinst.sh.gz -rw-r--r-- 1 root root 745 2002-03-25 03:59 ./source/n/ytalk/slack-desc @@ -7431,8 +7835,8 @@ drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/n/ytalk drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/n/zd1211-firmware -rw-r--r-- 1 root root 39061 2007-10-04 11:55 ./source/n/zd1211-firmware/zd1211-firmware-1.4.tar.bz2 -rwxr-xr-x 1 root root 2935 2009-05-19 20:05 ./source/n/zd1211-firmware/zd1211-firmware.SlackBuild -drwxr-xr-x 5 root root 4096 2009-08-13 01:17 ./source/t -drwxr-xr-x 3 root root 4096 2009-05-19 20:05 ./source/t/tetex +drwxr-xr-x 5 root root 4096 2010-05-17 19:31 ./source/t +drwxr-xr-x 3 root root 4096 2010-05-17 19:05 ./source/t/tetex -rw-r--r-- 1 root root 103137 2005-10-04 18:51 ./source/t/tetex/jadetex-3.13.tar.gz -rwxr-xr-x 1 root root 2073 2008-10-15 15:01 ./source/t/tetex/jadetex.build drwxr-xr-x 2 root root 4096 2002-08-28 23:00 ./source/t/tetex/profile.d @@ -7444,22 +7848,27 @@ drwxr-xr-x 2 root root 4096 2002-08-28 23:00 ./source/t/tetex/profile.d -rw-r--r-- 1 root root 75797944 2005-02-06 19:41 ./source/t/tetex/tetex-texmf-3.0.tar.xz -rw-r--r-- 1 root root 47549400 2005-02-06 19:41 ./source/t/tetex/tetex-texmfsrc-3.0.tar.xz -rw-r--r-- 1 root root 1759 2006-01-17 12:14 ./source/t/tetex/tetex.CVE-2005-3193.diff.gz --rwxr-xr-x 1 root root 8306 2009-06-09 19:39 ./source/t/tetex/tetex.SlackBuild +-rwxr-xr-x 1 root root 9081 2010-05-17 18:14 ./source/t/tetex/tetex.SlackBuild +-rw-r--r-- 1 root root 517 2010-02-19 17:56 ./source/t/tetex/tetex.afm2tfm.getline.diff.gz -rw-r--r-- 1 root root 303 2005-02-10 20:29 ./source/t/tetex/tetex.amstex.fmtutil.diff.gz -rw-r--r-- 1 root root 633 2006-05-16 21:40 ./source/t/tetex/tetex.browsers.diff.gz +-rw-r--r-- 1 root root 389 2010-02-19 17:27 ./source/t/tetex/tetex.cpascal.getline.posix.2008.diff.gz -rw-r--r-- 1 root root 504 2004-09-09 13:25 ./source/t/tetex/tetex.dvipdfm.mkstemp.diff.gz -rw-r--r-- 1 root root 239 2005-07-18 00:11 ./source/t/tetex/tetex.etex.diff.gz -rw-r--r-- 1 root root 375 2007-06-28 02:45 ./source/t/tetex/tetex.fontcachedirinhome.diff.gz +-rw-r--r-- 1 root root 478 2010-05-17 18:03 ./source/t/tetex/tetex.leet.diff.gz +-rw-r--r-- 1 root root 580 2010-02-19 17:52 ./source/t/tetex/tetex.png14.diff.gz -rw-r--r-- 1 root root 2480 2005-02-10 20:29 ./source/t/tetex/tetex.scripts.mktemp.diff.gz -rw-r--r-- 1 root root 724 2005-11-09 10:00 ./source/t/tetex/tetex.tmp.cleanup.diff.gz -rw-r--r-- 1 root root 250 2005-02-10 20:29 ./source/t/tetex/tetex.var.fonts.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/t/transfig +drwxr-xr-x 2 root root 4096 2010-02-20 01:26 ./source/t/transfig -rw-r--r-- 1 root root 903 2008-02-11 03:44 ./source/t/transfig/slack-desc -rw-r--r-- 1 root root 601 2007-02-19 22:21 ./source/t/transfig/transfig.3.2.4-gcc4.patch.gz -rw-r--r-- 1 root root 326284 2002-12-19 18:38 ./source/t/transfig/transfig.3.2.4.tar.gz --rwxr-xr-x 1 root root 3299 2009-05-19 20:05 ./source/t/transfig/transfig.SlackBuild +-rwxr-xr-x 1 root root 3669 2010-02-20 01:27 ./source/t/transfig/transfig.SlackBuild -rw-r--r-- 1 root root 479 2007-02-19 22:21 ./source/t/transfig/transfig.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/t/xfig +-rw-r--r-- 1 root root 285 2010-02-20 01:26 ./source/t/transfig/transfig.png14.nodither.diff.gz +drwxr-xr-x 2 root root 4096 2010-02-20 01:32 ./source/t/xfig -rw-r--r-- 1 root root 886 2008-02-11 03:44 ./source/t/xfig/slack-desc -rw-r--r-- 1 root root 3177 2004-02-05 12:49 ./source/t/xfig/xfig-3.2.4-mkstemp.diff.gz -rw-r--r-- 1 root root 604 2004-02-03 17:52 ./source/t/xfig/xfig.3.2.3d-international-std-fonts.diff.gz @@ -7472,11 +7881,12 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/t/xfig -rw-r--r-- 1 root root 1599 2005-10-06 17:19 ./source/t/xfig/xfig.3.2.4-urw-fonts.diff.gz -rw-r--r-- 1 root root 5582 2008-04-14 04:41 ./source/t/xfig/xfig.3.2.4.diff.gz -rw-r--r-- 1 root root 3666286 2006-08-15 00:06 ./source/t/xfig/xfig.3.2.4.full.tar.bz2 --rwxr-xr-x 1 root root 3690 2009-05-19 20:05 ./source/t/xfig/xfig.SlackBuild +-rwxr-xr-x 1 root root 4442 2010-02-21 17:15 ./source/t/xfig/xfig.SlackBuild -rw-r--r-- 1 root root 288 2007-02-19 09:33 ./source/t/xfig/xfig.docs.location.diff.gz -rw-r--r-- 1 root root 578 2007-02-19 09:06 ./source/t/xfig/xfig.fig.ad.diff.gz -rw-r--r-- 1 root root 402 2006-08-14 23:55 ./source/t/xfig/xfig.no.pdf.ref.diff.gz -rw-r--r-- 1 root root 286 2006-08-15 00:21 ./source/t/xfig/xfig.no.xfig_ref_en.pdf.diff.gz +-rw-r--r-- 1 root root 279 2010-02-20 01:32 ./source/t/xfig/xfig.png14.nodither.diff.gz drwxr-xr-x 8 root root 4096 2008-11-07 15:27 ./source/tcl drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/tcl/expect -rw-r--r-- 1 root root 567944 2008-10-29 18:15 ./source/tcl/expect/expect-5.44.1.11.tar.bz2 @@ -7489,41 +7899,42 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/tcl/hfsutils -rwxr-xr-x 1 root root 4449 2009-05-19 20:05 ./source/tcl/hfsutils/hfsutils.SlackBuild -rw-r--r-- 1 root root 209 2005-07-11 02:18 ./source/tcl/hfsutils/hfsutils.errno.diff.gz -rw-r--r-- 1 root root 928 2008-02-11 03:44 ./source/tcl/hfsutils/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/tcl/tcl +drwxr-xr-x 2 root root 4096 2009-12-07 00:43 ./source/tcl/tcl -rw-r--r-- 1 root root 713 2002-03-23 23:59 ./source/tcl/tcl/slack-desc --rwxr-xr-x 1 root root 3637 2009-05-19 20:05 ./source/tcl/tcl/tcl.SlackBuild --rw-r--r-- 1 root root 2817904 2009-04-15 20:19 ./source/tcl/tcl/tcl8.5.7-src.tar.xz +-rwxr-xr-x 1 root root 3927 2009-12-07 00:43 ./source/tcl/tcl/tcl.SlackBuild +-rw-r--r-- 1 root root 2769496 2009-11-17 16:26 ./source/tcl/tcl/tcl8.5.8-src.tar.xz drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/tcl/tclx -rw-r--r-- 1 root root 1010 2002-03-24 00:00 ./source/tcl/tclx/slack-desc -rw-r--r-- 1 root root 353 2007-02-21 04:54 ./source/tcl/tclx/tclx-8.4.configure.diff.gz -rw-r--r-- 1 root root 270 2007-02-21 04:54 ./source/tcl/tclx/tclx-8.4.gcc4.diff.gz --rwxr-xr-x 1 root root 3585 2009-05-19 20:05 ./source/tcl/tclx/tclx.SlackBuild +-rwxr-xr-x 1 root root 3874 2009-12-07 00:52 ./source/tcl/tclx/tclx.SlackBuild -rw-r--r-- 1 root root 313595 2006-02-03 15:28 ./source/tcl/tclx/tclx8.4.tar.bz2 drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/tcl/tix -rw-r--r-- 1 root root 1831503 2008-07-28 19:37 ./source/tcl/tix/Tix8.4.3.tar.gz -rw-r--r-- 1 root root 860 2002-03-24 00:02 ./source/tcl/tix/slack-desc --rwxr-xr-x 1 root root 3043 2009-05-19 20:05 ./source/tcl/tix/tix.SlackBuild +-rwxr-xr-x 1 root root 3333 2009-12-07 00:50 ./source/tcl/tix/tix.SlackBuild -rw-r--r-- 1 root root 236 2006-11-18 04:05 ./source/tcl/tix/tix.soname.patch.gz -rw-r--r-- 1 root root 1908 2008-09-09 00:46 ./source/tcl/tix/tix.tcl8.5.patch.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/tcl/tk +drwxr-xr-x 2 root root 4096 2009-12-07 00:47 ./source/tcl/tk -rw-r--r-- 1 root root 651 2002-03-24 00:03 ./source/tcl/tk/slack-desc --rwxr-xr-x 1 root root 3526 2009-05-19 20:05 ./source/tcl/tk/tk.SlackBuild --rw-r--r-- 1 root root 2520152 2009-04-15 15:11 ./source/tcl/tk/tk8.5.7-src.tar.xz -drwxr-xr-x 29 root root 4096 2009-08-04 00:09 ./source/x +-rwxr-xr-x 1 root root 3816 2009-12-07 00:48 ./source/tcl/tk/tk.SlackBuild +-rw-r--r-- 1 root root 2402508 2009-11-17 16:26 ./source/tcl/tk/tk8.5.8-src.tar.xz +drwxr-xr-x 30 root root 4096 2010-04-27 21:48 ./source/x drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/anthy -rw-r--r-- 1 root root 4235687 2008-01-28 15:07 ./source/x/anthy/anthy-9100e.tar.gz -rwxr-xr-x 1 root root 3610 2009-05-19 20:05 ./source/x/anthy/anthy.SlackBuild -rw-r--r-- 1 root root 714 2008-02-13 08:13 ./source/x/anthy/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/dejavu-fonts-ttf --rw-r--r-- 1 root root 4157803 2009-03-08 19:23 ./source/x/dejavu-fonts-ttf/dejavu-fonts-ttf-2.29.tar.bz2 --rwxr-xr-x 1 root root 2722 2009-05-19 20:05 ./source/x/dejavu-fonts-ttf/dejavu-fonts-ttf.SlackBuild +drwxr-xr-x 2 root root 4096 2009-11-05 22:11 ./source/x/dejavu-fonts-ttf +-rw-r--r-- 1 root root 4348431 2009-08-27 15:14 ./source/x/dejavu-fonts-ttf/dejavu-fonts-ttf-2.30.tar.bz2 +-rwxr-xr-x 1 root root 2722 2009-11-05 22:11 ./source/x/dejavu-fonts-ttf/dejavu-fonts-ttf.SlackBuild -rw-r--r-- 1 root root 167 2007-03-24 05:03 ./source/x/dejavu-fonts-ttf/doinst.sh.gz -rw-r--r-- 1 root root 1003 2008-08-03 19:13 ./source/x/dejavu-fonts-ttf/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/fontconfig --rw-r--r-- 1 root root 1115512 2008-06-01 02:43 ./source/x/fontconfig/fontconfig-2.6.0.tar.bz2 --rwxr-xr-x 1 root root 5103 2009-05-19 20:05 ./source/x/fontconfig/fontconfig.SlackBuild --rw-r--r-- 1 root root 476 2008-09-18 02:57 ./source/x/fontconfig/fontconfig.dejavu.diff.gz --rw-r--r-- 1 root root 395 2008-09-22 20:44 ./source/x/fontconfig/fontconfig.font.dir.list.diff.gz +drwxr-xr-x 2 root root 4096 2009-12-02 03:54 ./source/x/fontconfig +-rw-r--r-- 1 root root 149 2009-12-02 03:54 ./source/x/fontconfig/doinst.sh.gz +-rw-r--r-- 1 root root 992040 2009-12-02 03:33 ./source/x/fontconfig/fontconfig-2.8.0.tar.xz +-rwxr-xr-x 1 root root 5286 2010-02-20 20:56 ./source/x/fontconfig/fontconfig.SlackBuild +-rw-r--r-- 1 root root 546 2009-12-02 03:49 ./source/x/fontconfig/fontconfig.dejavu.diff.gz +-rw-r--r-- 1 root root 457 2009-12-02 03:49 ./source/x/fontconfig/fontconfig.font.dir.list.diff.gz -rw-r--r-- 1 root root 657 2007-01-25 05:00 ./source/x/fontconfig/setup.05.fontconfig -rw-r--r-- 1 root root 809 2006-07-22 02:47 ./source/x/fontconfig/slack-desc drwxr-xr-x 2 root root 4096 2009-07-23 06:22 ./source/x/glew @@ -7531,9 +7942,10 @@ drwxr-xr-x 2 root root 4096 2009-07-23 06:22 ./source/x/glew -rwxr-xr-x 1 root root 2733 2009-08-04 00:09 ./source/x/glew/glew.SlackBuild -rw-r--r-- 1 root root 85 2009-07-23 06:15 ./source/x/glew/glew.url -rw-r--r-- 1 root root 840 2009-07-23 06:21 ./source/x/glew/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-22 07:14 ./source/x/libdrm --rw-r--r-- 1 root root 346076 2009-07-22 02:58 ./source/x/libdrm/libdrm-2.4.12.tar.xz --rwxr-xr-x 1 root root 3130 2009-08-04 00:10 ./source/x/libdrm/libdrm.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-27 21:57 ./source/x/libdrm +-rw-r--r-- 1 root root 348128 2010-04-02 20:55 ./source/x/libdrm/libdrm-2.4.20.tar.xz +-rwxr-xr-x 1 root root 3666 2010-03-03 21:38 ./source/x/libdrm/libdrm.SlackBuild +-rw-r--r-- 1 root root 257 2010-02-22 19:17 ./source/x/libdrm/libdrm.uint32_t.diff.gz -rw-r--r-- 1 root root 717 2007-02-01 01:33 ./source/x/libdrm/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/liberation-fonts-ttf -rw-r--r-- 1 root root 942 2008-03-27 11:15 ./source/x/liberation-fonts-ttf/60-liberation.conf @@ -7553,13 +7965,14 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/m17n-lib -rw-r--r-- 1 root root 962454 2009-03-03 00:46 ./source/x/m17n-lib/m17n-lib-1.5.4.tar.gz -rwxr-xr-x 1 root root 5451 2009-05-19 20:05 ./source/x/m17n-lib/m17n-lib.SlackBuild -rw-r--r-- 1 root root 875 2008-02-13 08:20 ./source/x/m17n-lib/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-23 06:25 ./source/x/mesa --rw-r--r-- 1 root root 1226672 2009-07-23 06:25 ./source/x/mesa/MesaDemos-7.5.tar.xz --rw-r--r-- 1 root root 251084 2009-07-23 06:25 ./source/x/mesa/MesaGLUT-7.5.tar.xz --rw-r--r-- 1 root root 3601424 2009-07-23 06:25 ./source/x/mesa/MesaLib-7.5.tar.xz +drwxr-xr-x 2 root root 4096 2010-04-09 14:06 ./source/x/mesa +-rw-r--r-- 1 root root 14055068 2010-04-05 19:48 ./source/x/mesa/MesaDemos-7.8.1.tar.xz +-rw-r--r-- 1 root root 150124 2010-04-05 19:49 ./source/x/mesa/MesaGLUT-7.8.1.tar.xz +-rw-r--r-- 1 root root 4148040 2010-04-05 19:49 ./source/x/mesa/MesaLib-7.8.1.tar.xz -rw-r--r-- 1 root root 352 2008-03-10 07:13 ./source/x/mesa/README.GIT -rw-r--r-- 1 root root 301 2008-03-10 07:14 ./source/x/mesa/get-mesa.sh --rwxr-xr-x 1 root root 4023 2009-08-04 00:10 ./source/x/mesa/mesa.SlackBuild +-rwxr-xr-x 1 root root 4390 2010-04-09 14:11 ./source/x/mesa/mesa.SlackBuild +-rw-r--r-- 1 root root 36 2009-12-05 00:46 ./source/x/mesa/mesa.url -rw-r--r-- 1 root root 790 2007-02-05 00:06 ./source/x/mesa/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/sazanami-fonts-ttf -rw-r--r-- 1 root root 8622710 2004-06-29 13:55 ./source/x/sazanami-fonts-ttf/sazanami-20040629.tar.bz2 @@ -7623,7 +8036,7 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/wqy-zenhei-font-tt -rw-r--r-- 1 root root 1156 2008-02-20 01:44 ./source/x/wqy-zenhei-font-ttf/slack-desc -rw-r--r-- 1 root root 6649596 2009-04-20 19:06 ./source/x/wqy-zenhei-font-ttf/wqy-zenhei-0.8.38-1.tar.bz2 -rwxr-xr-x 1 root root 3953 2009-05-19 20:05 ./source/x/wqy-zenhei-font-ttf/wqy-zenhei-font-ttf.SlackBuild -drwxr-xr-x 10 root root 4096 2009-08-01 05:02 ./source/x/x11 +drwxr-xr-x 10 root root 4096 2010-03-29 20:09 ./source/x/x11 drwxr-xr-x 4 root root 4096 2009-06-08 20:25 ./source/x/x11-skel -rw-r--r-- 1 root root 578 2009-06-08 20:24 ./source/x/x11-skel/doinst.sh.gz drwxr-xr-x 2 root root 4096 2007-02-14 19:32 ./source/x/x11-skel/manpages @@ -7637,204 +8050,83 @@ drwxr-xr-x 2 root root 4096 2007-02-14 19:15 ./source/x/x11-skel/scripts -rw-r--r-- 1 root root 1066 2007-05-28 21:04 ./source/x/x11-skel/slack-desc -rwxr-xr-x 1 root root 2315 2009-06-08 20:29 ./source/x/x11-skel/x11-skel.SlackBuild -rw-r--r-- 1 root root 183 2009-05-30 01:47 ./source/x/x11/arch.use.flags -drwxr-xr-x 2 root root 4096 2009-08-04 00:52 ./source/x/x11/build --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/appres --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/bdftopcf --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/bigreqsproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/bitmap --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/compiz --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/compositeproto --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/damageproto --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/dmxproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/editres --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/encodings --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/evieext --rw-r--r-- 1 root root 2 2009-08-01 03:35 ./source/x/x11/build/fixesproto --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-adobe-100dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-adobe-75dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-adobe-utopia-100dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-adobe-utopia-75dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-adobe-utopia-type1 --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-alias --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-arabic-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bh-100dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bh-75dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bh-lucidatypewriter-100dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bh-lucidatypewriter-75dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bh-ttf --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bh-type1 --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bitstream-100dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bitstream-75dpi --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bitstream-speedo --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-bitstream-type1 --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-cronyx-cyrillic --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-cursor-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-daewoo-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-dec-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-ibm-type1 --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-isas-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-jis-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-micro-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-misc-cyrillic --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-misc-ethiopic --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-misc-meltho --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-misc-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-mutt-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-schumacher-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-screen-cyrillic --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-sony-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-sun-misc --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-util --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-winitzki-cyrillic --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/font-xfree86-type1 --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/fontcacheproto --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/fontsproto +drwxr-xr-x 2 root root 4096 2010-05-05 06:54 ./source/x/x11/build -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/gccmakedep --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/iceauth -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/ico --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/imake --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/kbproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/lbxproxy --rw-r--r-- 1 root root 2 2009-08-01 03:10 ./source/x/x11/build/libICE --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXScrnSaver -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXTrap --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXau --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXcomposite --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXcursor --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXdamage --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXdmcp -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXevie --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXfixes --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXfontcache --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXft --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXinerama --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXmu -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXp --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXpm -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXprintAppUtil -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXprintUtil --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXrender --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXres --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXtst --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXv --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXvMC --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXxf86dga --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXxf86misc --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libXxf86vm --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libdmx --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libfontenc --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/liblbxutil --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libpthread-stubs --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libxkbfile -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/libxkbui --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/listres -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/lndir --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/luit --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/makedepend --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/mkcomposecache --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/mkfontdir -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/oclock -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/printproto -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/proxymngr --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/recordproto -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/rendercheck --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/resourceproto -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/scripts --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/scrnsaverproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/smproxy -rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/trapproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/twm --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/videoproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/viewres --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/x11perf --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xauth --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xbacklight --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xbiff --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xbitmaps --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xcalc --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xclipboard --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xclock --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/xcmiscproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xcmsdb --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xcompmgr +-rw-r--r-- 1 root root 2 2009-12-01 07:39 ./source/x/x11/build/twm -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xconsole --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xcursor-themes --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xcursorgen -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xdbedizzy -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xditview --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xdriinfo --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xev --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xeyes -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xf86-input-elographics -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xf86-input-mutouch --rw-r--r-- 1 root root 2 2009-07-10 04:55 ./source/x/x11/build/xf86-video-ati --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xf86-video-nsc --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xf86-video-openchrome --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xf86-video-v4l --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/xf86bigfontproto +-rw-r--r-- 1 root root 2 2010-05-02 00:37 ./source/x/x11/build/xf86-input-vmmouse +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-apm +-rw-r--r-- 1 root root 2 2009-10-24 04:16 ./source/x/x11/build/xf86-video-ast +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-cirrus +-rw-r--r-- 1 root root 2 2009-10-24 04:16 ./source/x/x11/build/xf86-video-glint +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-i128 +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-i740 +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-mach64 +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-mga +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-neomagic +-rw-r--r-- 1 root root 2 2009-10-24 04:16 ./source/x/x11/build/xf86-video-r128 +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-s3 +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-s3virge +-rw-r--r-- 1 root root 2 2009-10-24 04:16 ./source/x/x11/build/xf86-video-savage +-rw-r--r-- 1 root root 2 2009-10-24 04:16 ./source/x/x11/build/xf86-video-sis +-rw-r--r-- 1 root root 2 2009-10-24 04:16 ./source/x/x11/build/xf86-video-sisusb +-rw-r--r-- 1 root root 2 2009-10-24 04:16 ./source/x/x11/build/xf86-video-tdfx +-rw-r--r-- 1 root root 2 2010-02-21 23:17 ./source/x/x11/build/xf86-video-v4l +-rw-r--r-- 1 root root 2 2009-10-21 05:47 ./source/x/x11/build/xf86-video-vesa +-rw-r--r-- 1 root root 2 2009-10-24 04:18 ./source/x/x11/build/xf86-video-vmware +-rw-r--r-- 1 root root 2 2010-02-21 23:18 ./source/x/x11/build/xf86-video-voodoo -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xf86dga --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/xf86dgaproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xf86driproto --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/xf86miscproto -rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/xf86rushproto --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/xf86vidmodeproto -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xfd -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xfindproxy -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xfontsel -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xfwp --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xgamma -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xgc --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xhost --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/xineramaproto --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xkbevd --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xkbprint --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xkbutils --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xkill -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xload --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xlogo --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xlsatoms --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xlsclients -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xlsfonts --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xmag --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xman --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xmessage -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xmh --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xmodmap -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xmore --rw-r--r-- 1 root root 2 2009-08-11 03:18 ./source/x/x11/build/xorg-cf-files --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xorg-docs --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xorg-sgml-doctools -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xplsprinters --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xpr -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xprehashprinterlist --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xprop --rw-r--r-- 1 root root 2 2009-06-03 02:16 ./source/x/x11/build/xproxymanagementprotocol --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xrdb --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xrefresh --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xset -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xsetmode -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xsetpointer --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xsetroot -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xsm -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xstdcmap -rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xtrap --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xvidtune --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xvinfo --rw-r--r-- 1 root root 2 2009-06-03 02:17 ./source/x/x11/build/xwud -drwxr-xr-x 2 root root 4096 2009-08-01 03:17 ./source/x/x11/configure +drwxr-xr-x 2 root root 4096 2010-02-10 05:53 ./source/x/x11/configure -rw-r--r-- 1 root root 334 2009-02-10 21:18 ./source/x/x11/configure/compiz -rw-r--r-- 1 root root 257 2008-10-14 22:49 ./source/x/x11/configure/configure +-rw-r--r-- 1 root root 297 2009-10-20 04:17 ./source/x/x11/configure/font-util -rw-r--r-- 1 root root 276 2008-10-14 22:50 ./source/x/x11/configure/libX11 -rw-r--r-- 1 root root 304 2008-10-14 22:51 ./source/x/x11/configure/libXt -rw-r--r-- 1 root root 384 2009-07-10 03:05 ./source/x/x11/configure/pixman -rw-r--r-- 1 root root 276 2009-07-24 04:25 ./source/x/x11/configure/setxkbmap --rw-r--r-- 1 root root 539 2009-07-10 03:45 ./source/x/x11/configure/xf86-video-ati --rw-r--r-- 1 root root 539 2009-07-10 03:44 ./source/x/x11/configure/xf86-video-nv +-rw-r--r-- 1 root root 421 2010-05-02 00:36 ./source/x/x11/configure/xf86-input-vmmouse +-rw-r--r-- 1 root root 629 2010-02-22 00:56 ./source/x/x11/configure/xf86-video-ati +-rw-r--r-- 1 root root 629 2010-02-22 00:56 ./source/x/x11/configure/xf86-video-nv -rw-r--r-- 1 root root 282 2009-08-01 03:17 ./source/x/x11/configure/xfs -rw-r--r-- 1 root root 276 2009-07-24 04:28 ./source/x/x11/configure/xkbcomp -rw-r--r-- 1 root root 345 2008-10-14 22:51 ./source/x/x11/configure/xkeyboard-config -rw-r--r-- 1 root root 317 2008-10-14 22:51 ./source/x/x11/configure/xorg-docs --rw-r--r-- 1 root root 1392 2009-07-24 04:33 ./source/x/x11/configure/xorg-server +-rw-r--r-- 1 root root 1361 2010-02-23 18:08 ./source/x/x11/configure/xorg-server drwxr-xr-x 2 root root 4096 2009-08-01 05:00 ./source/x/x11/doinst.sh -rw-r--r-- 1 root root 237 2007-03-24 03:59 ./source/x/x11/doinst.sh/font-adobe-100dpi -rw-r--r-- 1 root root 236 2007-03-24 03:59 ./source/x/x11/doinst.sh/font-adobe-75dpi @@ -7878,22 +8170,21 @@ drwxr-xr-x 2 root root 4096 2009-08-01 05:00 ./source/x/x11/doinst.sh -rw-r--r-- 1 root root 212 2007-02-13 20:05 ./source/x/x11/doinst.sh/xorg-cf-files drwxr-xr-x 2 root root 4096 2009-05-30 01:47 ./source/x/x11/makepkg -rw-r--r-- 1 root root 2198 2009-06-03 04:55 ./source/x/x11/makepkg/xorg-server --rw-r--r-- 1 root root 4083 2009-06-05 16:50 ./source/x/x11/modularize +-rw-r--r-- 1 root root 4080 2009-11-20 14:26 ./source/x/x11/modularize -rw-r--r-- 1 root root 1336 2009-08-11 03:21 ./source/x/x11/noarch -rw-r--r-- 1 root root 726 2009-06-08 22:38 ./source/x/x11/package-blacklist -drwxr-xr-x 5 root root 4096 2009-08-01 05:28 ./source/x/x11/patch -drwxr-xr-x 2 root root 4096 2009-05-30 01:47 ./source/x/x11/patch/compiz --rw-r--r-- 1 root root 263 2009-05-30 01:47 ./source/x/x11/patch/compiz.patch --rw-r--r-- 1 root root 659 2009-05-30 01:47 ./source/x/x11/patch/compiz/compiz-0.7.8-kde42-crash.patch.gz --rw-r--r-- 1 root root 356 2009-05-30 01:47 ./source/x/x11/patch/compiz/compiz-0.7.8-kde42-krunner.patch.gz --rw-r--r-- 1 root root 1095 2009-05-30 01:47 ./source/x/x11/patch/compiz/compiz-0.7.8-kde42.patch.gz -drwxr-xr-x 2 root root 4096 2009-08-01 05:02 ./source/x/x11/patch/xorg-server --rw-r--r-- 1 root root 93 2009-08-01 05:02 ./source/x/x11/patch/xorg-server.patch +drwxr-xr-x 5 root root 4096 2010-04-27 19:26 ./source/x/x11/patch +drwxr-xr-x 2 root root 4096 2010-02-21 19:59 ./source/x/x11/patch/xcursorgen +-rw-r--r-- 1 root root 101 2010-02-21 19:59 ./source/x/x11/patch/xcursorgen.patch +-rw-r--r-- 1 root root 688 2010-02-21 19:59 ./source/x/x11/patch/xcursorgen/xcursorgen.png14.configure.kludge.diff.gz +drwxr-xr-x 2 root root 4096 2010-04-24 18:00 ./source/x/x11/patch/xf86-input-synaptics +-rw-r--r-- 1 root root 272 2010-04-24 18:02 ./source/x/x11/patch/xf86-input-synaptics.patch +-rw-r--r-- 1 root root 345 2010-04-24 18:00 ./source/x/x11/patch/xf86-input-synaptics/xf86-input-synaptics.tap-to-click.diff.gz +drwxr-xr-x 2 root root 4096 2010-04-29 19:15 ./source/x/x11/patch/xorg-server +-rw-r--r-- 1 root root 189 2010-04-29 19:16 ./source/x/x11/patch/xorg-server.patch -rw-r--r-- 1 root root 245 2009-05-30 01:47 ./source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-30 01:47 ./source/x/x11/patch/xscope --rw-r--r-- 1 root root 82 2009-05-30 01:47 ./source/x/x11/patch/xscope.patch --rw-r--r-- 1 root root 243 2009-05-30 01:47 ./source/x/x11/patch/xscope/xscope-1.1-scope.c.diff.gz -drwxr-xr-x 7 root root 4096 2009-08-11 03:27 ./source/x/x11/post-install +-rw-r--r-- 1 root root 221 2010-04-29 19:15 ./source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff.gz +drwxr-xr-x 7 root root 4096 2009-12-15 01:10 ./source/x/x11/post-install -rw-r--r-- 1 root root 357 2007-02-16 21:17 ./source/x/x11/post-install/beforelight.post-install -rw-r--r-- 1 root root 275 2007-02-14 02:06 ./source/x/x11/post-install/encodings.post-install -rw-r--r-- 1 root root 275 2007-02-13 21:50 ./source/x/x11/post-install/font-adobe-100dpi.post-install @@ -7945,19 +8236,21 @@ drwxr-xr-x 2 root root 4096 2007-03-24 04:12 ./source/x/x11/post-install/m -rw-r--r-- 1 root root 106 2007-02-13 23:24 ./source/x/x11/post-install/rstart.post-install drwxr-xr-x 2 root root 4096 2007-02-22 01:03 ./source/x/x11/post-install/twm -rw-r--r-- 1 root root 175 2007-02-22 01:05 ./source/x/x11/post-install/twm.post-install --rw-r--r-- 1 root root 733 2007-03-24 03:56 ./source/x/x11/post-install/twm/xinitrc.twm +-rw-r--r-- 1 root root 725 2009-12-01 07:39 ./source/x/x11/post-install/twm/xinitrc.twm +-rw-r--r-- 1 root root 63 2009-12-15 01:10 ./source/x/x11/post-install/util-macros.post-install -rw-r--r-- 1 root root 344 2007-02-13 23:28 ./source/x/x11/post-install/x11-app-test.post-install -rw-r--r-- 1 root root 275 2007-02-13 21:50 ./source/x/x11/post-install/x11-font.post-install -rw-r--r-- 1 root root 68 2007-02-13 21:50 ./source/x/x11/post-install/x11-util.post-install -rw-r--r-- 1 root root 155 2007-02-14 06:42 ./source/x/x11/post-install/xcb-proto.post-install drwxr-xr-x 2 root root 4096 2007-02-14 01:08 ./source/x/x11/post-install/xdm --rw-r--r-- 1 root root 585 2007-02-14 05:54 ./source/x/x11/post-install/xdm.post-install +-rw-r--r-- 1 root root 671 2010-03-12 01:08 ./source/x/x11/post-install/xdm.post-install -rwxr-xr-x 1 root root 5401 2007-02-14 01:17 ./source/x/x11/post-install/xdm/Xsession -rwxr-xr-x 1 root root 708 2001-02-17 22:27 ./source/x/x11/post-install/xdm/Xsession.orig -rwxr-xr-x 1 root root 503 2007-02-14 01:22 ./source/x/x11/post-install/xdm/Xsetup_0 -rwxr-xr-x 1 root root 145 2007-02-13 06:04 ./source/x/x11/post-install/xdm/Xsetup_0.orig -rw-r--r-- 1 root root 40 2008-09-15 22:43 ./source/x/x11/post-install/xf86-input-joystick.post-install --rw-r--r-- 1 root root 309 2009-05-30 01:47 ./source/x/x11/post-install/xf86-input-synaptics.post-install +-rw-r--r-- 1 root root 304 2009-12-14 04:05 ./source/x/x11/post-install/xf86-input-synaptics.post-install +-rw-r--r-- 1 root root 209 2010-02-16 04:31 ./source/x/x11/post-install/xf86-input-wacom.post-install -rw-r--r-- 1 root root 54 2009-08-01 05:00 ./source/x/x11/post-install/xfs.post-install drwxr-xr-x 2 root root 4096 2007-07-01 03:06 ./source/x/x11/post-install/xinit -rw-r--r-- 1 root root 637 2007-07-01 03:13 ./source/x/x11/post-install/xinit.post-install @@ -7969,7 +8262,7 @@ drwxr-xr-x 2 root root 4096 2009-08-11 03:27 ./source/x/x11/post-install/x -rw-r--r-- 1 root root 30 2007-02-14 01:57 ./source/x/x11/post-install/xorg-docs.post-install -rw-r--r-- 1 root root 476 2009-08-02 03:48 ./source/x/x11/post-install/xorg-server.post-install -rw-r--r-- 1 root root 100 2007-02-13 23:26 ./source/x/x11/post-install/xsm.post-install -drwxr-xr-x 2 root root 16384 2009-05-30 01:47 ./source/x/x11/slack-desc +drwxr-xr-x 2 root root 12288 2009-12-15 03:39 ./source/x/x11/slack-desc -rw-r--r-- 1 root root 811 2007-02-13 23:03 ./source/x/x11/slack-desc/applewmproto -rw-r--r-- 1 root root 727 2007-02-13 23:03 ./source/x/x11/slack-desc/appres -rw-r--r-- 1 root root 755 2007-02-13 23:03 ./source/x/x11/slack-desc/bdftopcf @@ -8176,6 +8469,7 @@ drwxr-xr-x 2 root root 16384 2009-05-30 01:47 ./source/x/x11/slack-desc -rw-r--r-- 1 root root 853 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-input-ur98 -rw-r--r-- 1 root root 895 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-input-vmmouse -rw-r--r-- 1 root root 853 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-input-void +-rw-r--r-- 1 root root 867 2009-11-20 14:31 ./source/x/x11/slack-desc/xf86-input-wacom -rw-r--r-- 1 root root 839 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-video-apm -rw-r--r-- 1 root root 839 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-video-ark -rw-r--r-- 1 root root 839 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-video-ast @@ -8228,6 +8522,8 @@ drwxr-xr-x 2 root root 16384 2009-05-30 01:47 ./source/x/x11/slack-desc -rw-r--r-- 1 root root 881 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-video-vmware -rw-r--r-- 1 root root 881 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-video-voodoo -rw-r--r-- 1 root root 853 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86-video-wsfb +-rw-r--r-- 1 root root 839 2009-12-15 03:39 ./source/x/x11/slack-desc/xf86-video-xgi +-rw-r--r-- 1 root root 867 2009-12-15 03:39 ./source/x/x11/slack-desc/xf86-video-xgixp -rw-r--r-- 1 root root 867 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86bigfontproto -rw-r--r-- 1 root root 741 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86dga -rw-r--r-- 1 root root 811 2007-02-13 23:03 ./source/x/x11/slack-desc/xf86dgaproto @@ -8299,59 +8595,57 @@ drwxr-xr-x 2 root root 16384 2009-05-30 01:47 ./source/x/x11/slack-desc -rw-r--r-- 1 root root 685 2007-02-13 23:03 ./source/x/x11/slack-desc/xwd -rw-r--r-- 1 root root 755 2007-02-13 23:03 ./source/x/x11/slack-desc/xwininfo -rw-r--r-- 1 root root 699 2007-02-13 23:03 ./source/x/x11/slack-desc/xwud -drwxr-xr-x 12 root root 4096 2009-08-01 02:35 ./source/x/x11/src -drwxr-xr-x 2 root root 4096 2009-08-03 22:31 ./source/x/x11/src/app --rw-r--r-- 1 root root 78644 2007-01-23 02:18 ./source/x/x11/src/app/appres-1.0.1.tar.xz --rw-r--r-- 1 root root 78868 2007-04-26 00:19 ./source/x/x11/src/app/bdftopcf-1.0.1.tar.xz +drwxr-xr-x 12 root root 4096 2010-04-16 03:23 ./source/x/x11/src +drwxr-xr-x 2 root root 4096 2010-04-12 04:28 ./source/x/x11/src/app +-rw-r--r-- 1 root root 88296 2009-10-13 20:34 ./source/x/x11/src/app/appres-1.0.2.tar.xz +-rw-r--r-- 1 root root 88168 2009-10-13 20:34 ./source/x/x11/src/app/bdftopcf-1.0.2.tar.xz -rw-r--r-- 1 root root 79116 2007-09-08 20:25 ./source/x/x11/src/app/beforelight-1.0.3.tar.xz --rw-r--r-- 1 root root 117944 2007-01-23 21:54 ./source/x/x11/src/app/bitmap-1.0.3.tar.xz --rw-r--r-- 1 root root 845256 2008-09-17 12:13 ./source/x/x11/src/app/compiz-0.7.8.tar.xz --rw-r--r-- 1 root root 81568 2007-08-28 23:08 ./source/x/x11/src/app/constype-1.0.1.tar.xz --rw-r--r-- 1 root root 118876 2007-01-24 01:10 ./source/x/x11/src/app/editres-1.0.3.tar.xz +-rw-r--r-- 1 root root 129364 2009-10-13 20:34 ./source/x/x11/src/app/bitmap-1.0.4.tar.xz +-rw-r--r-- 1 root root 939656 2010-03-28 12:43 ./source/x/x11/src/app/compiz-0.8.6.tar.xz +-rw-r--r-- 1 root root 127380 2009-10-13 20:34 ./source/x/x11/src/app/editres-1.0.4.tar.xz -rw-r--r-- 1 root root 98084 2008-05-10 22:53 ./source/x/x11/src/app/fonttosfnt-1.0.4.tar.xz -rw-r--r-- 1 root root 81636 2008-05-23 23:33 ./source/x/x11/src/app/fslsfonts-1.0.2.tar.xz -rw-r--r-- 1 root root 83136 2008-05-23 23:55 ./source/x/x11/src/app/fstobdf-1.0.3.tar.xz --rw-r--r-- 1 root root 89364 2007-07-24 01:28 ./source/x/x11/src/app/iceauth-1.0.2.tar.xz +-rw-r--r-- 1 root root 97520 2009-10-13 20:33 ./source/x/x11/src/app/iceauth-1.0.3.tar.xz -rw-r--r-- 1 root root 89560 2007-07-21 00:22 ./source/x/x11/src/app/ico-1.0.2.tar.xz --rw-r--r-- 1 root root 233128 2009-05-19 23:51 ./source/x/x11/src/app/intel-gpu-tools-1.0.1.tar.xz --rw-r--r-- 1 root root 169456 2006-01-18 23:51 ./source/x/x11/src/app/lbxproxy-1.0.1.tar.xz --rw-r--r-- 1 root root 70920 2006-01-18 23:51 ./source/x/x11/src/app/listres-1.0.1.tar.xz --rw-r--r-- 1 root root 95920 2008-01-31 23:37 ./source/x/x11/src/app/luit-1.0.3.tar.xz +-rw-r--r-- 1 root root 238960 2009-10-13 20:35 ./source/x/x11/src/app/intel-gpu-tools-1.0.2.tar.xz +-rw-r--r-- 1 root root 93928 2009-12-15 23:10 ./source/x/x11/src/app/listres-1.0.2.tar.xz +-rw-r--r-- 1 root root 112348 2010-02-10 00:54 ./source/x/x11/src/app/luit-1.0.5.tar.xz -rw-r--r-- 1 root root 70424 2006-01-18 23:51 ./source/x/x11/src/app/mkcfm-1.0.1.tar.xz --rw-r--r-- 1 root root 60884 2007-01-29 11:59 ./source/x/x11/src/app/mkcomposecache-1.2.tar.xz --rw-r--r-- 1 root root 65480 2008-03-06 21:48 ./source/x/x11/src/app/mkfontdir-1.0.4.tar.xz --rw-r--r-- 1 root root 96952 2008-12-19 01:09 ./source/x/x11/src/app/mkfontscale-1.0.6.tar.xz +-rw-r--r-- 1 root root 90748 2009-10-13 20:33 ./source/x/x11/src/app/mkcomposecache-1.2.1.tar.xz +-rw-r--r-- 1 root root 80324 2009-10-13 20:32 ./source/x/x11/src/app/mkfontdir-1.0.5.tar.xz +-rw-r--r-- 1 root root 102088 2009-10-13 20:33 ./source/x/x11/src/app/mkfontscale-1.0.7.tar.xz -rw-r--r-- 1 root root 76552 2006-01-18 23:51 ./source/x/x11/src/app/oclock-1.0.1.tar.xz -rw-r--r-- 1 root root 84328 2006-01-18 23:51 ./source/x/x11/src/app/proxymngr-1.0.1.tar.xz -rw-r--r-- 1 root root 81948 2008-03-07 21:48 ./source/x/x11/src/app/rendercheck-1.3.tar.xz -rw-r--r-- 1 root root 93640 2008-06-06 03:18 ./source/x/x11/src/app/rgb-1.0.3.tar.xz -rw-r--r-- 1 root root 96964 2009-08-02 13:41 ./source/x/x11/src/app/rstart-1.0.3.tar.xz -rw-r--r-- 1 root root 67148 2006-01-18 23:51 ./source/x/x11/src/app/scripts-1.0.1.tar.xz --rw-r--r-- 1 root root 88680 2008-06-11 22:50 ./source/x/x11/src/app/sessreg-1.0.4.tar.xz +-rw-r--r-- 1 root root 94992 2009-10-13 20:32 ./source/x/x11/src/app/sessreg-1.0.5.tar.xz -rw-r--r-- 1 root root 91836 2009-07-08 23:20 ./source/x/x11/src/app/setxkbmap-1.1.0.tar.xz -rw-r--r-- 1 root root 83512 2008-05-24 00:14 ./source/x/x11/src/app/showfont-1.0.2.tar.xz --rw-r--r-- 1 root root 80860 2006-04-02 00:41 ./source/x/x11/src/app/smproxy-1.0.2.tar.xz +-rw-r--r-- 1 root root 95064 2009-10-17 00:29 ./source/x/x11/src/app/smproxy-1.0.3.tar.xz -rw-r--r-- 1 root root 220032 2008-03-06 21:53 ./source/x/x11/src/app/twm-1.0.4.tar.xz --rw-r--r-- 1 root root 78176 2006-01-18 23:51 ./source/x/x11/src/app/viewres-1.0.1.tar.xz --rw-r--r-- 1 root root 132064 2008-03-07 21:55 ./source/x/x11/src/app/x11perf-1.5.tar.xz --rw-r--r-- 1 root root 104196 2008-03-06 21:57 ./source/x/x11/src/app/xauth-1.0.3.tar.xz --rw-r--r-- 1 root root 74184 2007-06-21 13:55 ./source/x/x11/src/app/xbacklight-1.1.tar.xz --rw-r--r-- 1 root root 77224 2006-01-18 23:51 ./source/x/x11/src/app/xbiff-1.0.1.tar.xz --rw-r--r-- 1 root root 96788 2007-08-21 18:28 ./source/x/x11/src/app/xcalc-1.0.2.tar.xz --rw-r--r-- 1 root root 76940 2006-01-18 23:51 ./source/x/x11/src/app/xclipboard-1.0.1.tar.xz --rw-r--r-- 1 root root 102988 2007-08-06 22:48 ./source/x/x11/src/app/xclock-1.0.3.tar.xz --rw-r--r-- 1 root root 85988 2006-01-18 23:51 ./source/x/x11/src/app/xcmsdb-1.0.1.tar.xz --rw-r--r-- 1 root root 73296 2008-03-06 22:02 ./source/x/x11/src/app/xcompmgr-1.1.4.tar.xz +-rw-r--r-- 1 root root 102100 2009-12-17 02:31 ./source/x/x11/src/app/viewres-1.0.2.tar.xz +-rw-r--r-- 1 root root 139668 2009-10-17 00:29 ./source/x/x11/src/app/x11perf-1.5.1.tar.xz +-rw-r--r-- 1 root root 109976 2009-10-13 20:34 ./source/x/x11/src/app/xauth-1.0.4.tar.xz +-rw-r--r-- 1 root root 86356 2009-10-13 20:33 ./source/x/x11/src/app/xbacklight-1.1.1.tar.xz +-rw-r--r-- 1 root root 99944 2009-12-17 16:33 ./source/x/x11/src/app/xbiff-1.0.2.tar.xz +-rw-r--r-- 1 root root 109872 2009-12-18 03:52 ./source/x/x11/src/app/xcalc-1.0.3.tar.xz +-rw-r--r-- 1 root root 96824 2009-10-17 00:27 ./source/x/x11/src/app/xclipboard-1.1.0.tar.xz +-rw-r--r-- 1 root root 116444 2009-10-13 20:34 ./source/x/x11/src/app/xclock-1.0.4.tar.xz +-rw-r--r-- 1 root root 104120 2009-10-17 00:28 ./source/x/x11/src/app/xcmsdb-1.0.2.tar.xz +-rw-r--r-- 1 root root 102928 2009-11-02 23:52 ./source/x/x11/src/app/xcompmgr-1.1.5.tar.xz -rw-r--r-- 1 root root 91192 2007-08-21 02:04 ./source/x/x11/src/app/xconsole-1.0.3.tar.xz --rw-r--r-- 1 root root 83576 2007-08-21 01:32 ./source/x/x11/src/app/xcursorgen-1.0.2.tar.xz +-rw-r--r-- 1 root root 92040 2009-10-17 02:34 ./source/x/x11/src/app/xcursorgen-1.0.3.tar.xz -rw-r--r-- 1 root root 81204 2006-10-13 21:48 ./source/x/x11/src/app/xdbedizzy-1.0.2.tar.xz -rw-r--r-- 1 root root 94716 2006-01-18 23:51 ./source/x/x11/src/app/xditview-1.0.1.tar.xz --rw-r--r-- 1 root root 323404 2008-05-21 18:28 ./source/x/x11/src/app/xdm-1.1.8.tar.xz --rw-r--r-- 1 root root 95224 2008-05-21 18:23 ./source/x/x11/src/app/xdpyinfo-1.0.3.tar.xz --rw-r--r-- 1 root root 82072 2007-08-17 23:28 ./source/x/x11/src/app/xdriinfo-1.0.2.tar.xz +-rw-r--r-- 1 root root 356384 2010-04-10 02:27 ./source/x/x11/src/app/xdm-1.1.10.tar.xz +-rw-r--r-- 1 root root 107276 2009-10-17 00:29 ./source/x/x11/src/app/xdpyinfo-1.1.0.tar.xz +-rw-r--r-- 1 root root 90812 2009-10-17 00:29 ./source/x/x11/src/app/xdriinfo-1.0.3.tar.xz -rw-r--r-- 1 root root 452488 2008-11-07 19:14 ./source/x/x11/src/app/xedit-1.1.2.tar.xz --rw-r--r-- 1 root root 85228 2008-03-07 22:15 ./source/x/x11/src/app/xev-1.0.3.tar.xz --rw-r--r-- 1 root root 74588 2006-01-18 23:51 ./source/x/x11/src/app/xeyes-1.0.1.tar.xz +-rw-r--r-- 1 root root 93064 2009-10-13 20:31 ./source/x/x11/src/app/xev-1.0.4.tar.xz +-rw-r--r-- 1 root root 96824 2009-12-18 15:02 ./source/x/x11/src/app/xeyes-1.1.0.tar.xz -rw-r--r-- 1 root root 74620 2006-10-13 21:50 ./source/x/x11/src/app/xf86dga-1.0.2.tar.xz -rw-r--r-- 1 root root 81676 2006-01-18 23:51 ./source/x/x11/src/app/xfd-1.0.1.tar.xz -rw-r--r-- 1 root root 71840 2006-01-18 23:51 ./source/x/x11/src/app/xfindproxy-1.0.1.tar.xz @@ -8359,58 +8653,58 @@ drwxr-xr-x 2 root root 4096 2009-08-03 22:31 ./source/x/x11/src/app -rw-r--r-- 1 root root 174808 2009-08-01 03:13 ./source/x/x11/src/app/xfs-1.1.0.tar.xz -rw-r--r-- 1 root root 81172 2008-05-23 23:17 ./source/x/x11/src/app/xfsinfo-1.0.2.tar.xz -rw-r--r-- 1 root root 98048 2006-01-18 23:51 ./source/x/x11/src/app/xfwp-1.0.1.tar.xz --rw-r--r-- 1 root root 79880 2007-08-07 01:57 ./source/x/x11/src/app/xgamma-1.0.2.tar.xz --rw-r--r-- 1 root root 119636 2006-01-18 23:51 ./source/x/x11/src/app/xgc-1.0.1.tar.xz --rw-r--r-- 1 root root 90752 2007-07-16 23:04 ./source/x/x11/src/app/xhost-1.0.2.tar.xz --rw-r--r-- 1 root root 117264 2008-12-17 23:43 ./source/x/x11/src/app/xinit-1.1.1.tar.xz --rw-r--r-- 1 root root 99044 2009-05-07 05:25 ./source/x/x11/src/app/xinput-1.4.2.tar.xz --rw-r--r-- 1 root root 197672 2009-07-08 22:58 ./source/x/x11/src/app/xkbcomp-1.1.0.tar.xz --rw-r--r-- 1 root root 99508 2006-04-02 01:09 ./source/x/x11/src/app/xkbevd-1.0.2.tar.xz --rw-r--r-- 1 root root 105928 2006-01-18 23:51 ./source/x/x11/src/app/xkbprint-1.0.1.tar.xz --rw-r--r-- 1 root root 59792 2006-01-18 23:51 ./source/x/x11/src/app/xkbutils-1.0.1.tar.xz --rw-r--r-- 1 root root 71472 2006-01-18 23:51 ./source/x/x11/src/app/xkill-1.0.1.tar.xz +-rw-r--r-- 1 root root 88336 2009-10-14 02:28 ./source/x/x11/src/app/xgamma-1.0.3.tar.xz +-rw-r--r-- 1 root root 145304 2009-11-11 06:57 ./source/x/x11/src/app/xgc-1.0.2.tar.xz +-rw-r--r-- 1 root root 96908 2009-10-14 02:28 ./source/x/x11/src/app/xhost-1.0.3.tar.xz +-rw-r--r-- 1 root root 127904 2010-03-16 00:08 ./source/x/x11/src/app/xinit-1.2.1.tar.xz +-rw-r--r-- 1 root root 111676 2010-03-15 01:48 ./source/x/x11/src/app/xinput-1.5.1.tar.xz +-rw-r--r-- 1 root root 198428 2009-10-13 20:33 ./source/x/x11/src/app/xkbcomp-1.1.1.tar.xz +-rw-r--r-- 1 root root 116760 2009-10-17 02:34 ./source/x/x11/src/app/xkbevd-1.1.0.tar.xz +-rw-r--r-- 1 root root 124464 2009-11-11 07:42 ./source/x/x11/src/app/xkbprint-1.0.2.tar.xz +-rw-r--r-- 1 root root 100400 2009-10-17 02:35 ./source/x/x11/src/app/xkbutils-1.0.2.tar.xz +-rw-r--r-- 1 root root 90576 2009-10-13 20:31 ./source/x/x11/src/app/xkill-1.0.2.tar.xz -rw-r--r-- 1 root root 85624 2007-03-22 05:35 ./source/x/x11/src/app/xload-1.0.2.tar.xz --rw-r--r-- 1 root root 80120 2006-01-18 23:51 ./source/x/x11/src/app/xlogo-1.0.1.tar.xz --rw-r--r-- 1 root root 69384 2006-01-18 23:51 ./source/x/x11/src/app/xlsatoms-1.0.1.tar.xz --rw-r--r-- 1 root root 69924 2006-01-18 23:51 ./source/x/x11/src/app/xlsclients-1.0.1.tar.xz +-rw-r--r-- 1 root root 102884 2009-12-11 15:01 ./source/x/x11/src/app/xlogo-1.0.2.tar.xz +-rw-r--r-- 1 root root 88136 2009-10-13 20:31 ./source/x/x11/src/app/xlsatoms-1.0.2.tar.xz +-rw-r--r-- 1 root root 88504 2009-10-17 02:35 ./source/x/x11/src/app/xlsclients-1.0.2.tar.xz -rw-r--r-- 1 root root 91080 2007-02-01 22:15 ./source/x/x11/src/app/xlsfonts-1.0.2.tar.xz --rw-r--r-- 1 root root 97920 2007-08-16 01:05 ./source/x/x11/src/app/xmag-1.0.2.tar.xz --rw-r--r-- 1 root root 133816 2007-08-10 14:22 ./source/x/x11/src/app/xman-1.0.3.tar.xz --rw-r--r-- 1 root root 87812 2007-08-10 09:25 ./source/x/x11/src/app/xmessage-1.0.2.tar.xz +-rw-r--r-- 1 root root 101644 2009-10-13 20:35 ./source/x/x11/src/app/xmag-1.0.3.tar.xz +-rw-r--r-- 1 root root 142312 2009-10-17 00:29 ./source/x/x11/src/app/xman-1.1.0.tar.xz +-rw-r--r-- 1 root root 101600 2010-01-30 07:17 ./source/x/x11/src/app/xmessage-1.0.3.tar.xz -rw-r--r-- 1 root root 147888 2006-01-18 23:51 ./source/x/x11/src/app/xmh-1.0.1.tar.xz --rw-r--r-- 1 root root 95024 2007-08-06 23:03 ./source/x/x11/src/app/xmodmap-1.0.3.tar.xz +-rw-r--r-- 1 root root 107052 2009-10-13 20:33 ./source/x/x11/src/app/xmodmap-1.0.4.tar.xz -rw-r--r-- 1 root root 85148 2006-01-18 23:51 ./source/x/x11/src/app/xmore-1.0.1.tar.xz -rw-r--r-- 1 root root 64084 2006-01-18 23:51 ./source/x/x11/src/app/xphelloworld-1.0.1.tar.xz -rw-r--r-- 1 root root 71268 2006-01-18 23:51 ./source/x/x11/src/app/xplsprinters-1.0.1.tar.xz --rw-r--r-- 1 root root 107484 2007-01-28 09:32 ./source/x/x11/src/app/xpr-1.0.2.tar.xz +-rw-r--r-- 1 root root 117216 2009-10-17 03:48 ./source/x/x11/src/app/xpr-1.0.3.tar.xz -rw-r--r-- 1 root root 70076 2006-01-18 23:51 ./source/x/x11/src/app/xprehashprinterlist-1.0.1.tar.xz --rw-r--r-- 1 root root 100896 2008-03-07 22:24 ./source/x/x11/src/app/xprop-1.0.4.tar.xz --rw-r--r-- 1 root root 118860 2009-04-01 15:04 ./source/x/x11/src/app/xrandr-1.3.0.tar.xz --rw-r--r-- 1 root root 94188 2008-03-06 22:16 ./source/x/x11/src/app/xrdb-1.0.5.tar.xz --rw-r--r-- 1 root root 74764 2006-04-02 01:16 ./source/x/x11/src/app/xrefresh-1.0.2.tar.xz --rw-r--r-- 1 root root 122604 2008-09-23 02:21 ./source/x/x11/src/app/xscope-1.1.tar.xz --rw-r--r-- 1 root root 95868 2008-03-06 22:29 ./source/x/x11/src/app/xset-1.0.4.tar.xz +-rw-r--r-- 1 root root 107816 2009-10-13 20:32 ./source/x/x11/src/app/xprop-1.1.0.tar.xz +-rw-r--r-- 1 root root 119588 2009-10-13 20:35 ./source/x/x11/src/app/xrandr-1.3.2.tar.xz +-rw-r--r-- 1 root root 99888 2009-10-13 20:32 ./source/x/x11/src/app/xrdb-1.0.6.tar.xz +-rw-r--r-- 1 root root 89092 2009-10-17 02:35 ./source/x/x11/src/app/xrefresh-1.0.3.tar.xz +-rw-r--r-- 1 root root 156440 2009-10-13 20:33 ./source/x/x11/src/app/xscope-1.2.tar.xz +-rw-r--r-- 1 root root 104564 2009-10-13 20:35 ./source/x/x11/src/app/xset-1.1.0.tar.xz -rw-r--r-- 1 root root 68360 2006-01-18 23:51 ./source/x/x11/src/app/xsetmode-1.0.0.tar.xz -rw-r--r-- 1 root root 76884 2006-11-02 01:38 ./source/x/x11/src/app/xsetpointer-1.0.1.tar.xz --rw-r--r-- 1 root root 81732 2007-08-10 08:59 ./source/x/x11/src/app/xsetroot-1.0.2.tar.xz +-rw-r--r-- 1 root root 93404 2009-10-17 03:47 ./source/x/x11/src/app/xsetroot-1.0.3.tar.xz -rw-r--r-- 1 root root 110080 2006-01-18 23:51 ./source/x/x11/src/app/xsm-1.0.1.tar.xz -rw-r--r-- 1 root root 70724 2006-01-18 23:51 ./source/x/x11/src/app/xstdcmap-1.0.1.tar.xz -rw-r--r-- 1 root root 88004 2006-05-12 16:23 ./source/x/x11/src/app/xtrap-1.0.2.tar.xz --rw-r--r-- 1 root root 80872 2006-01-18 23:51 ./source/x/x11/src/app/xvidtune-1.0.1.tar.xz --rw-r--r-- 1 root root 80204 2007-08-16 23:27 ./source/x/x11/src/app/xvinfo-1.0.2.tar.xz --rw-r--r-- 1 root root 102728 2008-06-29 15:31 ./source/x/x11/src/app/xwd-1.0.2.tar.xz --rw-r--r-- 1 root root 93464 2008-06-29 15:50 ./source/x/x11/src/app/xwininfo-1.0.4.tar.xz --rw-r--r-- 1 root root 76664 2006-01-18 23:51 ./source/x/x11/src/app/xwud-1.0.1.tar.xz -drwxr-xr-x 2 root root 4096 2009-05-27 00:05 ./source/x/x11/src/data --rw-r--r-- 1 root root 54248 2006-01-18 23:51 ./source/x/x11/src/data/xbitmaps-1.0.1.tar.xz --rw-r--r-- 1 root root 1439460 2006-01-18 23:51 ./source/x/x11/src/data/xcursor-themes-1.0.1.tar.xz --rw-r--r-- 1 root root 514092 2009-05-27 00:05 ./source/x/x11/src/data/xkeyboard-config-1.6.tar.xz -drwxr-xr-x 2 root root 4096 2007-03-03 20:32 ./source/x/x11/src/doc --rw-r--r-- 1 root root 7580256 2007-03-03 20:10 ./source/x/x11/src/doc/xorg-docs-1.4.tar.xz --rw-r--r-- 1 root root 36620 2007-03-03 20:32 ./source/x/x11/src/doc/xorg-sgml-doctools-1.2.tar.xz -drwxr-xr-x 2 root root 4096 2009-08-26 03:48 ./source/x/x11/src/driver --rw-r--r-- 1 root root 191536 2009-02-24 03:28 ./source/x/x11/src/driver/xf86-input-acecad-1.3.0.tar.xz --rw-r--r-- 1 root root 200028 2009-02-24 03:49 ./source/x/x11/src/driver/xf86-input-aiptek-1.2.0.tar.xz +-rw-r--r-- 1 root root 103856 2010-01-16 07:12 ./source/x/x11/src/app/xvidtune-1.0.2.tar.xz +-rw-r--r-- 1 root root 88788 2009-10-17 03:48 ./source/x/x11/src/app/xvinfo-1.1.0.tar.xz +-rw-r--r-- 1 root root 108372 2009-10-17 03:48 ./source/x/x11/src/app/xwd-1.0.3.tar.xz +-rw-r--r-- 1 root root 101032 2009-10-13 20:32 ./source/x/x11/src/app/xwininfo-1.0.5.tar.xz +-rw-r--r-- 1 root root 95264 2009-10-13 20:31 ./source/x/x11/src/app/xwud-1.0.2.tar.xz +drwxr-xr-x 2 root root 4096 2010-02-11 01:52 ./source/x/x11/src/data +-rw-r--r-- 1 root root 95580 2009-10-14 23:00 ./source/x/x11/src/data/xbitmaps-1.1.0.tar.xz +-rw-r--r-- 1 root root 1442840 2009-10-13 20:36 ./source/x/x11/src/data/xcursor-themes-1.0.2.tar.xz +-rw-r--r-- 1 root root 534532 2010-01-26 23:38 ./source/x/x11/src/data/xkeyboard-config-1.8.tar.xz +drwxr-xr-x 2 root root 4096 2010-04-07 21:11 ./source/x/x11/src/doc +-rw-r--r-- 1 root root 1700284 2009-10-25 22:18 ./source/x/x11/src/doc/xorg-docs-1.5.tar.xz +-rw-r--r-- 1 root root 83520 2010-04-05 13:56 ./source/x/x11/src/doc/xorg-sgml-doctools-1.4.tar.xz +drwxr-xr-x 2 root root 4096 2010-05-10 08:11 ./source/x/x11/src/driver +-rw-r--r-- 1 root root 210288 2009-10-13 20:39 ./source/x/x11/src/driver/xf86-input-acecad-1.4.0.tar.xz +-rw-r--r-- 1 root root 218480 2009-10-13 20:39 ./source/x/x11/src/driver/xf86-input-aiptek-1.3.0.tar.xz -rw-r--r-- 1 root root 183984 2008-03-20 19:04 ./source/x/x11/src/driver/xf86-input-calcomp-1.1.2.tar.xz -rw-r--r-- 1 root root 207380 2009-04-29 00:56 ./source/x/x11/src/driver/xf86-input-citron-2.2.2.tar.xz -rw-r--r-- 1 root root 182548 2008-03-20 19:15 ./source/x/x11/src/driver/xf86-input-digitaledge-1.1.1.tar.xz @@ -8418,260 +8712,261 @@ drwxr-xr-x 2 root root 4096 2009-08-26 03:48 ./source/x/x11/src/driver -rw-r--r-- 1 root root 181148 2008-03-20 19:23 ./source/x/x11/src/driver/xf86-input-dynapro-1.1.2.tar.xz -rw-r--r-- 1 root root 183804 2008-05-21 18:58 ./source/x/x11/src/driver/xf86-input-elo2300-1.1.2.tar.xz -rw-r--r-- 1 root root 189608 2008-10-21 05:10 ./source/x/x11/src/driver/xf86-input-elographics-1.2.3.tar.xz --rw-r--r-- 1 root root 250780 2009-08-20 23:31 ./source/x/x11/src/driver/xf86-input-evdev-2.2.5.tar.xz +-rw-r--r-- 1 root root 257320 2010-04-12 01:06 ./source/x/x11/src/driver/xf86-input-evdev-2.3.3.tar.xz -rw-r--r-- 1 root root 189848 2009-02-18 01:42 ./source/x/x11/src/driver/xf86-input-fpit-1.3.0.tar.xz -rw-r--r-- 1 root root 183932 2009-02-27 00:32 ./source/x/x11/src/driver/xf86-input-hyperpen-1.3.0.tar.xz -rw-r--r-- 1 root root 177228 2008-03-20 19:59 ./source/x/x11/src/driver/xf86-input-jamstudio-1.2.0.tar.xz --rw-r--r-- 1 root root 251880 2008-12-28 19:58 ./source/x/x11/src/driver/xf86-input-joystick-1.4.0.tar.xz --rw-r--r-- 1 root root 216708 2009-01-07 17:43 ./source/x/x11/src/driver/xf86-input-keyboard-1.3.2.tar.xz +-rw-r--r-- 1 root root 233420 2009-10-13 20:38 ./source/x/x11/src/driver/xf86-input-joystick-1.4.99.2.tar.xz +-rw-r--r-- 1 root root 234700 2009-10-13 20:38 ./source/x/x11/src/driver/xf86-input-keyboard-1.4.0.tar.xz -rw-r--r-- 1 root root 181608 2008-03-20 20:12 ./source/x/x11/src/driver/xf86-input-magellan-1.2.0.tar.xz -rw-r--r-- 1 root root 161972 2006-01-18 23:51 ./source/x/x11/src/driver/xf86-input-magictouch-1.0.0.5.tar.xz -rw-r--r-- 1 root root 184172 2008-03-20 20:22 ./source/x/x11/src/driver/xf86-input-microtouch-1.2.0.tar.xz --rw-r--r-- 1 root root 235672 2009-01-10 02:45 ./source/x/x11/src/driver/xf86-input-mouse-1.4.0.tar.xz +-rw-r--r-- 1 root root 258204 2009-10-13 20:38 ./source/x/x11/src/driver/xf86-input-mouse-1.5.0.tar.xz -rw-r--r-- 1 root root 185284 2008-10-01 23:51 ./source/x/x11/src/driver/xf86-input-mutouch-1.2.1.tar.xz -rw-r--r-- 1 root root 180076 2008-03-20 20:35 ./source/x/x11/src/driver/xf86-input-palmax-1.2.0.tar.xz --rw-r--r-- 1 root root 185904 2009-02-19 06:36 ./source/x/x11/src/driver/xf86-input-penmount-1.4.0.tar.xz +-rw-r--r-- 1 root root 206712 2010-03-04 19:51 ./source/x/x11/src/driver/xf86-input-penmount-1.4.1.tar.xz -rw-r--r-- 1 root root 180460 2007-09-10 17:16 ./source/x/x11/src/driver/xf86-input-spaceorb-1.1.1.tar.xz -rw-r--r-- 1 root root 184212 2008-03-20 20:45 ./source/x/x11/src/driver/xf86-input-summa-1.2.0.tar.xz --rw-r--r-- 1 root root 247252 2009-08-03 01:41 ./source/x/x11/src/driver/xf86-input-synaptics-1.1.3.tar.xz +-rw-r--r-- 1 root root 247984 2010-03-26 05:23 ./source/x/x11/src/driver/xf86-input-synaptics-1.2.2.tar.xz -rw-r--r-- 1 root root 179536 2008-03-20 20:49 ./source/x/x11/src/driver/xf86-input-tek4957-1.2.0.tar.xz -rw-r--r-- 1 root root 171836 2006-04-07 22:09 ./source/x/x11/src/driver/xf86-input-ur98-1.1.0.tar.xz --rw-r--r-- 1 root root 194012 2009-05-11 17:37 ./source/x/x11/src/driver/xf86-input-vmmouse-12.6.4.tar.xz --rw-r--r-- 1 root root 182900 2009-02-24 22:56 ./source/x/x11/src/driver/xf86-input-void-1.2.0.tar.xz +-rw-r--r-- 1 root root 224352 2010-04-08 23:11 ./source/x/x11/src/driver/xf86-input-vmmouse-12.6.9.tar.xz +-rw-r--r-- 1 root root 201500 2009-10-13 20:39 ./source/x/x11/src/driver/xf86-input-void-1.3.0.tar.xz +-rw-r--r-- 1 root root 306188 2010-03-19 05:34 ./source/x/x11/src/driver/xf86-input-wacom-0.10.5.tar.xz -rw-r--r-- 1 root root 223284 2009-07-30 01:25 ./source/x/x11/src/driver/xf86-video-apm-1.2.2.tar.xz --rw-r--r-- 1 root root 183220 2008-12-22 05:26 ./source/x/x11/src/driver/xf86-video-ark-0.7.1.tar.xz +-rw-r--r-- 1 root root 186220 2009-10-13 20:40 ./source/x/x11/src/driver/xf86-video-ark-0.7.2.tar.xz -rw-r--r-- 1 root root 208756 2009-07-30 02:29 ./source/x/x11/src/driver/xf86-video-ast-0.89.9.tar.xz --rw-r--r-- 1 root root 748288 2009-04-08 14:37 ./source/x/x11/src/driver/xf86-video-ati-6.12.2.tar.xz --rw-r--r-- 1 root root 273428 2008-12-22 04:27 ./source/x/x11/src/driver/xf86-video-chips-1.2.1.tar.xz +-rw-r--r-- 1 root root 846292 2010-04-05 16:04 ./source/x/x11/src/driver/xf86-video-ati-6.13.0.tar.xz +-rw-r--r-- 1 root root 289268 2009-10-13 20:40 ./source/x/x11/src/driver/xf86-video-chips-1.2.2.tar.xz -rw-r--r-- 1 root root 223812 2009-07-30 02:12 ./source/x/x11/src/driver/xf86-video-cirrus-1.3.2.tar.xz -rw-r--r-- 1 root root 189032 2006-04-07 22:43 ./source/x/x11/src/driver/xf86-video-cyrix-1.1.0.tar.xz --rw-r--r-- 1 root root 196748 2009-07-02 15:09 ./source/x/x11/src/driver/xf86-video-dummy-0.3.2.tar.xz --rw-r--r-- 1 root root 499472 2009-06-19 13:58 ./source/x/x11/src/driver/xf86-video-geode-2.11.3.tar.xz --rw-r--r-- 1 root root 190248 2009-02-25 00:23 ./source/x/x11/src/driver/xf86-video-glide-1.0.2.tar.xz +-rw-r--r-- 1 root root 204340 2009-12-02 02:02 ./source/x/x11/src/driver/xf86-video-dummy-0.3.3.tar.xz +-rw-r--r-- 1 root root 512804 2010-04-15 14:00 ./source/x/x11/src/driver/xf86-video-geode-2.11.8.tar.xz +-rw-r--r-- 1 root root 207780 2009-10-13 20:40 ./source/x/x11/src/driver/xf86-video-glide-1.0.3.tar.xz -rw-r--r-- 1 root root 281928 2009-07-30 02:13 ./source/x/x11/src/driver/xf86-video-glint-1.2.4.tar.xz -rw-r--r-- 1 root root 216052 2009-07-30 02:14 ./source/x/x11/src/driver/xf86-video-i128-1.3.3.tar.xz -rw-r--r-- 1 root root 209584 2009-07-30 02:14 ./source/x/x11/src/driver/xf86-video-i740-1.3.2.tar.xz -rw-r--r-- 1 root root 178892 2006-06-28 01:36 ./source/x/x11/src/driver/xf86-video-impact-0.2.0.tar.xz -rw-r--r-- 1 root root 175160 2006-04-07 22:43 ./source/x/x11/src/driver/xf86-video-imstt-1.1.0.tar.xz --rw-r--r-- 1 root root 566640 2008-11-13 20:38 ./source/x/x11/src/driver/xf86-video-intel-2.5.1.tar.xz --rw-r--r-- 1 root root 602624 2009-03-02 20:17 ./source/x/x11/src/driver/xf86-video-intel-2.6.3.tar.xz --rw-r--r-- 1 root root 625972 2009-05-13 00:16 ./source/x/x11/src/driver/xf86-video-intel-2.7.1.tar.xz --rw-r--r-- 1 root root 585420 2009-07-21 06:16 ./source/x/x11/src/driver/xf86-video-intel-2.8.0.tar.xz --rw-r--r-- 1 root root 587556 2009-08-25 23:59 ./source/x/x11/src/driver/xf86-video-intel-2.8.1.tar.xz +-rw-r--r-- 1 root root 710712 2010-03-29 18:31 ./source/x/x11/src/driver/xf86-video-intel-2.11.0.tar.xz -rw-r--r-- 1 root root 416140 2009-07-30 02:14 ./source/x/x11/src/driver/xf86-video-mach64-6.8.2.tar.xz -rw-r--r-- 1 root root 331660 2009-07-30 02:15 ./source/x/x11/src/driver/xf86-video-mga-1.4.11.tar.xz -rw-r--r-- 1 root root 218964 2009-07-30 02:18 ./source/x/x11/src/driver/xf86-video-neomagic-1.2.4.tar.xz --rw-r--r-- 1 root root 216404 2009-05-15 01:12 ./source/x/x11/src/driver/xf86-video-newport-0.2.2.tar.xz --rw-r--r-- 1 root root 378740 2007-09-05 01:11 ./source/x/x11/src/driver/xf86-video-nsc-2.8.3.tar.xz --rw-r--r-- 1 root root 342232 2009-07-02 19:15 ./source/x/x11/src/driver/xf86-video-nv-2.1.14.tar.xz --rw-r--r-- 1 root root 349420 2008-08-18 23:15 ./source/x/x11/src/driver/xf86-video-openchrome-0.2.903.tar.xz +-rw-r--r-- 1 root root 355664 2010-03-08 21:46 ./source/x/x11/src/driver/xf86-video-nv-2.1.17.tar.xz +-rw-r--r-- 1 root root 373296 2009-10-13 20:38 ./source/x/x11/src/driver/xf86-video-openchrome-0.2.904.tar.xz -rw-r--r-- 1 root root 351232 2009-07-30 02:15 ./source/x/x11/src/driver/xf86-video-r128-6.8.1.tar.xz --rw-r--r-- 1 root root 631392 2009-04-09 13:18 ./source/x/x11/src/driver/xf86-video-radeonhd-1.2.5.tar.xz --rw-r--r-- 1 root root 256504 2009-07-02 15:31 ./source/x/x11/src/driver/xf86-video-rendition-4.2.2.tar.xz +-rw-r--r-- 1 root root 656376 2009-10-13 20:38 ./source/x/x11/src/driver/xf86-video-radeonhd-1.3.0.tar.xz +-rw-r--r-- 1 root root 244408 2009-10-13 20:40 ./source/x/x11/src/driver/xf86-video-rendition-4.2.3.tar.xz -rw-r--r-- 1 root root 214920 2009-07-30 02:16 ./source/x/x11/src/driver/xf86-video-s3-0.6.3.tar.xz -rw-r--r-- 1 root root 236912 2009-07-30 02:16 ./source/x/x11/src/driver/xf86-video-s3virge-1.10.4.tar.xz -rw-r--r-- 1 root root 269908 2009-07-30 02:24 ./source/x/x11/src/driver/xf86-video-savage-2.3.1.tar.xz --rw-r--r-- 1 root root 281968 2009-07-02 15:44 ./source/x/x11/src/driver/xf86-video-siliconmotion-1.7.2.tar.xz +-rw-r--r-- 1 root root 294092 2010-04-27 22:39 ./source/x/x11/src/driver/xf86-video-siliconmotion-1.7.4.tar.xz -rw-r--r-- 1 root root 524420 2009-07-30 02:16 ./source/x/x11/src/driver/xf86-video-sis-0.10.2.tar.xz -rw-r--r-- 1 root root 261784 2009-07-30 02:28 ./source/x/x11/src/driver/xf86-video-sisusb-0.9.3.tar.xz -rw-r--r-- 1 root root 227984 2009-07-30 02:17 ./source/x/x11/src/driver/xf86-video-tdfx-1.4.3.tar.xz --rw-r--r-- 1 root root 211820 2008-09-03 22:16 ./source/x/x11/src/driver/xf86-video-tga-1.2.0.tar.xz --rw-r--r-- 1 root root 248272 2009-07-02 15:51 ./source/x/x11/src/driver/xf86-video-trident-1.3.2.tar.xz --rw-r--r-- 1 root root 236344 2009-07-02 15:53 ./source/x/x11/src/driver/xf86-video-tseng-1.2.2.tar.xz +-rw-r--r-- 1 root root 214348 2009-10-13 20:40 ./source/x/x11/src/driver/xf86-video-tga-1.2.1.tar.xz +-rw-r--r-- 1 root root 236604 2009-10-13 20:42 ./source/x/x11/src/driver/xf86-video-trident-1.3.3.tar.xz +-rw-r--r-- 1 root root 224288 2009-10-13 20:40 ./source/x/x11/src/driver/xf86-video-tseng-1.2.3.tar.xz -rw-r--r-- 1 root root 183872 2008-03-19 20:58 ./source/x/x11/src/driver/xf86-video-v4l-0.2.0.tar.xz -rw-r--r-- 1 root root 191028 2007-04-05 14:50 ./source/x/x11/src/driver/xf86-video-vermilion-1.0.1.tar.xz --rw-r--r-- 1 root root 191708 2009-07-30 02:17 ./source/x/x11/src/driver/xf86-video-vesa-2.2.1.tar.xz +-rw-r--r-- 1 root root 217708 2010-01-04 19:19 ./source/x/x11/src/driver/xf86-video-vesa-2.3.0.tar.xz -rw-r--r-- 1 root root 174860 2006-04-07 22:44 ./source/x/x11/src/driver/xf86-video-vga-4.1.0.tar.xz --rw-r--r-- 1 root root 217192 2009-07-21 18:11 ./source/x/x11/src/driver/xf86-video-vmware-10.16.7.tar.xz +-rw-r--r-- 1 root root 248320 2009-12-29 17:21 ./source/x/x11/src/driver/xf86-video-vmware-10.16.9.tar.xz -rw-r--r-- 1 root root 199400 2009-07-30 02:18 ./source/x/x11/src/driver/xf86-video-voodoo-1.2.3.tar.xz --rw-r--r-- 1 root root 178588 2007-01-02 15:15 ./source/x/x11/src/driver/xf86-video-wsfb-0.2.1.tar.xz --rw-r--r-- 1 root root 346324 2007-08-27 23:56 ./source/x/x11/src/driver/xf86-video-xgi-1.5.0.tar.xz --rw-r--r-- 1 root root 269476 2008-05-01 20:06 ./source/x/x11/src/driver/xf86-video-xgixp-1.7.99.3.tar.xz -drwxr-xr-x 2 root root 4096 2008-03-07 01:23 ./source/x/x11/src/font --rw-r--r-- 1 root root 248036 2006-11-08 14:03 ./source/x/x11/src/font/encodings-1.0.2.tar.xz --rw-r--r-- 1 root root 894236 2006-01-18 23:51 ./source/x/x11/src/font/font-adobe-100dpi-1.0.0.tar.xz --rw-r--r-- 1 root root 747096 2006-01-18 23:51 ./source/x/x11/src/font/font-adobe-75dpi-1.0.0.tar.xz --rw-r--r-- 1 root root 246640 2006-01-18 23:51 ./source/x/x11/src/font/font-adobe-utopia-100dpi-1.0.1.tar.xz --rw-r--r-- 1 root root 197904 2006-01-18 23:51 ./source/x/x11/src/font/font-adobe-utopia-75dpi-1.0.1.tar.xz --rw-r--r-- 1 root root 207816 2006-01-18 23:51 ./source/x/x11/src/font/font-adobe-utopia-type1-1.0.1.tar.xz --rw-r--r-- 1 root root 38596 2006-01-18 23:51 ./source/x/x11/src/font/font-alias-1.0.1.tar.xz --rw-r--r-- 1 root root 47268 2006-01-18 23:51 ./source/x/x11/src/font/font-arabic-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 545340 2006-01-18 23:51 ./source/x/x11/src/font/font-bh-100dpi-1.0.0.tar.xz --rw-r--r-- 1 root root 446048 2006-01-18 23:51 ./source/x/x11/src/font/font-bh-75dpi-1.0.0.tar.xz --rw-r--r-- 1 root root 164756 2006-01-18 23:51 ./source/x/x11/src/font/font-bh-lucidatypewriter-100dpi-1.0.0.tar.xz --rw-r--r-- 1 root root 142092 2006-01-18 23:51 ./source/x/x11/src/font/font-bh-lucidatypewriter-75dpi-1.0.0.tar.xz --rw-r--r-- 1 root root 312480 2006-01-18 23:51 ./source/x/x11/src/font/font-bh-ttf-1.0.0.tar.xz --rw-r--r-- 1 root root 570392 2006-01-18 23:51 ./source/x/x11/src/font/font-bh-type1-1.0.0.tar.xz --rw-r--r-- 1 root root 119016 2006-01-18 23:51 ./source/x/x11/src/font/font-bitstream-100dpi-1.0.0.tar.xz --rw-r--r-- 1 root root 101740 2006-01-18 23:51 ./source/x/x11/src/font/font-bitstream-75dpi-1.0.0.tar.xz --rw-r--r-- 1 root root 274744 2006-01-18 23:51 ./source/x/x11/src/font/font-bitstream-speedo-1.0.0.tar.xz --rw-r--r-- 1 root root 335976 2006-01-18 23:51 ./source/x/x11/src/font/font-bitstream-type1-1.0.0.tar.xz --rw-r--r-- 1 root root 181532 2006-01-18 23:51 ./source/x/x11/src/font/font-cronyx-cyrillic-1.0.0.tar.xz --rw-r--r-- 1 root root 39880 2006-01-18 23:51 ./source/x/x11/src/font/font-cursor-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 453956 2006-01-18 23:51 ./source/x/x11/src/font/font-daewoo-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 37860 2006-01-18 23:51 ./source/x/x11/src/font/font-dec-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 317652 2006-01-18 23:51 ./source/x/x11/src/font/font-ibm-type1-1.0.0.tar.xz --rw-r--r-- 1 root root 665684 2006-01-18 23:51 ./source/x/x11/src/font/font-isas-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 463920 2006-01-18 23:51 ./source/x/x11/src/font/font-jis-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 36340 2006-01-18 23:51 ./source/x/x11/src/font/font-micro-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 66352 2006-01-18 23:51 ./source/x/x11/src/font/font-misc-cyrillic-1.0.0.tar.xz --rw-r--r-- 1 root root 163988 2006-01-18 23:51 ./source/x/x11/src/font/font-misc-ethiopic-1.0.0.tar.xz --rw-r--r-- 1 root root 770636 2006-01-18 23:51 ./source/x/x11/src/font/font-misc-meltho-1.0.0.tar.xz --rw-r--r-- 1 root root 1351952 2006-01-18 23:51 ./source/x/x11/src/font/font-misc-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 164816 2006-01-18 23:51 ./source/x/x11/src/font/font-mutt-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 75392 2006-01-18 23:51 ./source/x/x11/src/font/font-schumacher-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 42372 2006-11-08 17:25 ./source/x/x11/src/font/font-screen-cyrillic-1.0.1.tar.xz --rw-r--r-- 1 root root 44676 2006-01-18 23:51 ./source/x/x11/src/font/font-sony-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 52212 2006-01-18 23:51 ./source/x/x11/src/font/font-sun-misc-1.0.0.tar.xz --rw-r--r-- 1 root root 88028 2006-05-19 18:35 ./source/x/x11/src/font/font-util-1.0.1.tar.xz --rw-r--r-- 1 root root 38556 2006-01-18 23:51 ./source/x/x11/src/font/font-winitzki-cyrillic-1.0.0.tar.xz --rw-r--r-- 1 root root 67212 2008-03-07 01:23 ./source/x/x11/src/font/font-xfree86-type1-1.0.1.tar.xz -drwxr-xr-x 2 root root 4096 2009-08-01 02:32 ./source/x/x11/src/lib +-rw-r--r-- 1 root root 378936 2009-10-13 20:39 ./source/x/x11/src/driver/xf86-video-xgi-1.5.1.tar.xz +drwxr-xr-x 2 root root 4096 2009-10-19 04:59 ./source/x/x11/src/font +-rw-r--r-- 1 root root 283516 2009-10-13 20:45 ./source/x/x11/src/font/encodings-1.0.3.tar.xz +-rw-r--r-- 1 root root 939812 2009-10-13 20:45 ./source/x/x11/src/font/font-adobe-100dpi-1.0.1.tar.xz +-rw-r--r-- 1 root root 791652 2009-10-13 20:45 ./source/x/x11/src/font/font-adobe-75dpi-1.0.1.tar.xz +-rw-r--r-- 1 root root 290820 2009-10-13 20:45 ./source/x/x11/src/font/font-adobe-utopia-100dpi-1.0.2.tar.xz +-rw-r--r-- 1 root root 242348 2009-10-13 20:45 ./source/x/x11/src/font/font-adobe-utopia-75dpi-1.0.2.tar.xz +-rw-r--r-- 1 root root 254720 2009-10-13 20:45 ./source/x/x11/src/font/font-adobe-utopia-type1-1.0.2.tar.xz +-rw-r--r-- 1 root root 84016 2009-10-13 20:45 ./source/x/x11/src/font/font-alias-1.0.2.tar.xz +-rw-r--r-- 1 root root 92388 2009-10-13 20:45 ./source/x/x11/src/font/font-arabic-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 590364 2009-10-13 20:45 ./source/x/x11/src/font/font-bh-100dpi-1.0.1.tar.xz +-rw-r--r-- 1 root root 492716 2009-10-13 20:45 ./source/x/x11/src/font/font-bh-75dpi-1.0.1.tar.xz +-rw-r--r-- 1 root root 209192 2009-10-13 20:44 ./source/x/x11/src/font/font-bh-lucidatypewriter-100dpi-1.0.1.tar.xz +-rw-r--r-- 1 root root 186460 2009-10-13 20:44 ./source/x/x11/src/font/font-bh-lucidatypewriter-75dpi-1.0.1.tar.xz +-rw-r--r-- 1 root root 356860 2009-10-13 20:44 ./source/x/x11/src/font/font-bh-ttf-1.0.1.tar.xz +-rw-r--r-- 1 root root 622220 2009-10-13 20:44 ./source/x/x11/src/font/font-bh-type1-1.0.1.tar.xz +-rw-r--r-- 1 root root 165584 2009-10-13 20:44 ./source/x/x11/src/font/font-bitstream-100dpi-1.0.1.tar.xz +-rw-r--r-- 1 root root 148364 2009-10-13 20:44 ./source/x/x11/src/font/font-bitstream-75dpi-1.0.1.tar.xz +-rw-r--r-- 1 root root 320980 2009-10-13 20:44 ./source/x/x11/src/font/font-bitstream-speedo-1.0.1.tar.xz +-rw-r--r-- 1 root root 381404 2009-10-13 20:44 ./source/x/x11/src/font/font-bitstream-type1-1.0.1.tar.xz +-rw-r--r-- 1 root root 227160 2009-10-13 20:44 ./source/x/x11/src/font/font-cronyx-cyrillic-1.0.1.tar.xz +-rw-r--r-- 1 root root 84820 2009-10-13 20:44 ./source/x/x11/src/font/font-cursor-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 499208 2009-10-13 20:44 ./source/x/x11/src/font/font-daewoo-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 83120 2009-10-13 20:44 ./source/x/x11/src/font/font-dec-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 364332 2009-10-13 20:44 ./source/x/x11/src/font/font-ibm-type1-1.0.1.tar.xz +-rw-r--r-- 1 root root 710580 2009-10-13 20:43 ./source/x/x11/src/font/font-isas-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 508536 2009-10-13 20:43 ./source/x/x11/src/font/font-jis-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 81776 2009-10-13 20:43 ./source/x/x11/src/font/font-micro-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 111980 2009-10-13 20:43 ./source/x/x11/src/font/font-misc-cyrillic-1.0.1.tar.xz +-rw-r--r-- 1 root root 208928 2009-10-13 20:43 ./source/x/x11/src/font/font-misc-ethiopic-1.0.1.tar.xz +-rw-r--r-- 1 root root 818808 2009-10-13 20:43 ./source/x/x11/src/font/font-misc-meltho-1.0.1.tar.xz +-rw-r--r-- 1 root root 1413876 2009-10-13 20:43 ./source/x/x11/src/font/font-misc-misc-1.1.0.tar.xz +-rw-r--r-- 1 root root 207352 2009-10-13 20:43 ./source/x/x11/src/font/font-mutt-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 118496 2009-10-13 20:43 ./source/x/x11/src/font/font-schumacher-misc-1.1.0.tar.xz +-rw-r--r-- 1 root root 86212 2009-10-13 20:43 ./source/x/x11/src/font/font-screen-cyrillic-1.0.2.tar.xz +-rw-r--r-- 1 root root 89656 2009-10-13 20:43 ./source/x/x11/src/font/font-sony-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 97616 2009-10-13 20:43 ./source/x/x11/src/font/font-sun-misc-1.0.1.tar.xz +-rw-r--r-- 1 root root 106884 2009-10-13 20:42 ./source/x/x11/src/font/font-util-1.1.1.tar.xz +-rw-r--r-- 1 root root 84168 2009-10-13 20:43 ./source/x/x11/src/font/font-winitzki-cyrillic-1.0.1.tar.xz +-rw-r--r-- 1 root root 108264 2009-10-13 20:42 ./source/x/x11/src/font/font-xfree86-type1-1.0.2.tar.xz +drwxr-xr-x 2 root root 4096 2010-03-16 01:35 ./source/x/x11/src/lib -rw-r--r-- 1 root root 202008 2009-07-07 22:57 ./source/x/x11/src/lib/libFS-1.0.2.tar.xz --rw-r--r-- 1 root root 216516 2009-01-06 19:57 ./source/x/x11/src/lib/libICE-1.0.5.tar.xz --rw-r--r-- 1 root root 192216 2008-07-02 18:06 ./source/x/x11/src/lib/libSM-1.1.0.tar.xz --rw-r--r-- 1 root root 1317640 2009-07-20 06:42 ./source/x/x11/src/lib/libX11-1.2.2.tar.xz --rw-r--r-- 1 root root 182092 2008-03-18 01:33 ./source/x/x11/src/lib/libXScrnSaver-1.1.3.tar.xz +-rw-r--r-- 1 root root 232780 2009-10-13 20:50 ./source/x/x11/src/lib/libICE-1.0.6.tar.xz +-rw-r--r-- 1 root root 215424 2009-10-13 20:52 ./source/x/x11/src/lib/libSM-1.1.1.tar.xz +-rw-r--r-- 1 root root 1474764 2010-01-16 19:55 ./source/x/x11/src/lib/libX11-1.3.3.tar.xz +-rw-r--r-- 1 root root 204048 2009-10-13 20:51 ./source/x/x11/src/lib/libXScrnSaver-1.2.0.tar.xz -rw-r--r-- 1 root root 166564 2006-01-18 23:51 ./source/x/x11/src/lib/libXTrap-1.0.0.tar.xz --rw-r--r-- 1 root root 187444 2008-08-26 21:24 ./source/x/x11/src/lib/libXau-1.0.4.tar.xz --rw-r--r-- 1 root root 448120 2009-07-02 17:37 ./source/x/x11/src/lib/libXaw-1.0.6.tar.xz --rw-r--r-- 1 root root 180416 2007-07-04 02:53 ./source/x/x11/src/lib/libXcomposite-0.4.0.tar.xz --rw-r--r-- 1 root root 196280 2007-08-24 21:06 ./source/x/x11/src/lib/libXcursor-1.1.9.tar.xz --rw-r--r-- 1 root root 168644 2007-03-14 19:06 ./source/x/x11/src/lib/libXdamage-1.1.1.tar.xz --rw-r--r-- 1 root root 183936 2006-08-11 22:05 ./source/x/x11/src/lib/libXdmcp-1.0.2.tar.xz +-rw-r--r-- 1 root root 206784 2009-10-13 20:50 ./source/x/x11/src/lib/libXau-1.0.5.tar.xz +-rw-r--r-- 1 root root 507844 2009-10-17 22:06 ./source/x/x11/src/lib/libXaw-1.0.7.tar.xz +-rw-r--r-- 1 root root 192216 2009-10-13 20:47 ./source/x/x11/src/lib/libXcomposite-0.4.1.tar.xz +-rw-r--r-- 1 root root 219680 2009-10-13 20:50 ./source/x/x11/src/lib/libXcursor-1.1.10.tar.xz +-rw-r--r-- 1 root root 185184 2009-10-13 20:47 ./source/x/x11/src/lib/libXdamage-1.1.2.tar.xz +-rw-r--r-- 1 root root 211188 2009-10-13 20:49 ./source/x/x11/src/lib/libXdmcp-1.0.3.tar.xz -rw-r--r-- 1 root root 171968 2006-10-13 20:03 ./source/x/x11/src/lib/libXevie-1.0.2.tar.xz --rw-r--r-- 1 root root 241100 2009-01-29 23:10 ./source/x/x11/src/lib/libXext-1.0.5.tar.xz --rw-r--r-- 1 root root 176204 2006-11-08 14:15 ./source/x/x11/src/lib/libXfixes-4.0.3.tar.xz --rw-r--r-- 1 root root 352132 2009-02-18 18:53 ./source/x/x11/src/lib/libXfont-1.4.0.tar.xz --rw-r--r-- 1 root root 175956 2006-12-15 23:28 ./source/x/x11/src/lib/libXfontcache-1.0.4.tar.xz --rw-r--r-- 1 root root 215192 2008-07-02 19:49 ./source/x/x11/src/lib/libXft-2.1.13.tar.xz --rw-r--r-- 1 root root 219888 2009-02-25 23:27 ./source/x/x11/src/lib/libXi-1.2.1.tar.xz --rw-r--r-- 1 root root 180280 2008-03-06 20:43 ./source/x/x11/src/lib/libXinerama-1.0.3.tar.xz --rw-r--r-- 1 root root 244428 2008-01-14 22:25 ./source/x/x11/src/lib/libXmu-1.0.4.tar.xz +-rw-r--r-- 1 root root 253892 2009-10-13 20:48 ./source/x/x11/src/lib/libXext-1.1.tar.xz +-rw-r--r-- 1 root root 190504 2009-10-13 20:47 ./source/x/x11/src/lib/libXfixes-4.0.4.tar.xz +-rw-r--r-- 1 root root 349212 2009-10-13 20:46 ./source/x/x11/src/lib/libXfont-1.4.1.tar.xz +-rw-r--r-- 1 root root 189140 2009-10-13 20:47 ./source/x/x11/src/lib/libXfontcache-1.0.5.tar.xz +-rw-r--r-- 1 root root 225892 2009-10-13 20:46 ./source/x/x11/src/lib/libXft-2.1.14.tar.xz +-rw-r--r-- 1 root root 287272 2009-10-13 20:48 ./source/x/x11/src/lib/libXi-1.3.tar.xz +-rw-r--r-- 1 root root 201688 2009-10-13 20:48 ./source/x/x11/src/lib/libXinerama-1.1.tar.xz +-rw-r--r-- 1 root root 254824 2009-10-13 20:49 ./source/x/x11/src/lib/libXmu-1.0.5.tar.xz -rw-r--r-- 1 root root 187292 2006-01-18 23:51 ./source/x/x11/src/lib/libXp-1.0.0.tar.xz --rw-r--r-- 1 root root 297804 2007-08-22 20:29 ./source/x/x11/src/lib/libXpm-3.5.7.tar.xz +-rw-r--r-- 1 root root 312808 2009-10-13 20:46 ./source/x/x11/src/lib/libXpm-3.5.8.tar.xz -rw-r--r-- 1 root root 156780 2006-01-18 23:51 ./source/x/x11/src/lib/libXprintAppUtil-1.0.1.tar.xz -rw-r--r-- 1 root root 168108 2006-01-18 23:51 ./source/x/x11/src/lib/libXprintUtil-1.0.1.tar.xz -rw-r--r-- 1 root root 213480 2009-03-06 14:17 ./source/x/x11/src/lib/libXrandr-1.3.0.tar.xz --rw-r--r-- 1 root root 189444 2007-09-05 15:23 ./source/x/x11/src/lib/libXrender-0.9.4.tar.xz --rw-r--r-- 1 root root 179104 2006-12-15 23:31 ./source/x/x11/src/lib/libXres-1.0.3.tar.xz --rw-r--r-- 1 root root 457508 2009-07-02 17:28 ./source/x/x11/src/lib/libXt-1.0.6.tar.xz --rw-r--r-- 1 root root 186500 2007-08-17 22:03 ./source/x/x11/src/lib/libXtst-1.0.3.tar.xz --rw-r--r-- 1 root root 188440 2008-03-18 03:02 ./source/x/x11/src/lib/libXv-1.0.4.tar.xz --rw-r--r-- 1 root root 183168 2006-12-15 23:34 ./source/x/x11/src/lib/libXvMC-1.0.4.tar.xz --rw-r--r-- 1 root root 181388 2007-09-05 17:21 ./source/x/x11/src/lib/libXxf86dga-1.0.2.tar.xz --rw-r--r-- 1 root root 168900 2006-04-27 00:26 ./source/x/x11/src/lib/libXxf86misc-1.0.1.tar.xz --rw-r--r-- 1 root root 183588 2008-07-02 19:44 ./source/x/x11/src/lib/libXxf86vm-1.0.2.tar.xz --rw-r--r-- 1 root root 176048 2006-04-26 23:51 ./source/x/x11/src/lib/libdmx-1.0.2.tar.xz --rw-r--r-- 1 root root 184784 2006-12-15 23:20 ./source/x/x11/src/lib/libfontenc-1.0.4.tar.xz --rw-r--r-- 1 root root 185464 2006-05-19 18:37 ./source/x/x11/src/lib/liblbxutil-1.0.1.tar.xz --rw-r--r-- 1 root root 216668 2009-04-24 23:36 ./source/x/x11/src/lib/libpciaccess-0.10.6.tar.xz --rw-r--r-- 1 root root 162620 2006-11-24 07:47 ./source/x/x11/src/lib/libpthread-stubs-0.1.tar.xz --rw-r--r-- 1 root root 223076 2008-03-18 02:50 ./source/x/x11/src/lib/libxkbfile-1.0.5.tar.xz +-rw-r--r-- 1 root root 201984 2009-10-13 20:48 ./source/x/x11/src/lib/libXrender-0.9.5.tar.xz +-rw-r--r-- 1 root root 188376 2009-10-13 20:47 ./source/x/x11/src/lib/libXres-1.0.4.tar.xz +-rw-r--r-- 1 root root 466060 2010-03-15 22:10 ./source/x/x11/src/lib/libXt-1.0.8.tar.xz +-rw-r--r-- 1 root root 211736 2009-10-13 20:48 ./source/x/x11/src/lib/libXtst-1.1.0.tar.xz +-rw-r--r-- 1 root root 201700 2009-10-13 20:48 ./source/x/x11/src/lib/libXv-1.0.5.tar.xz +-rw-r--r-- 1 root root 199920 2009-10-13 20:47 ./source/x/x11/src/lib/libXvMC-1.0.5.tar.xz +-rw-r--r-- 1 root root 209484 2009-10-13 20:47 ./source/x/x11/src/lib/libXxf86dga-1.1.1.tar.xz +-rw-r--r-- 1 root root 186704 2009-10-13 20:47 ./source/x/x11/src/lib/libXxf86misc-1.0.2.tar.xz +-rw-r--r-- 1 root root 204832 2009-10-13 20:47 ./source/x/x11/src/lib/libXxf86vm-1.1.0.tar.xz +-rw-r--r-- 1 root root 208060 2009-10-13 20:48 ./source/x/x11/src/lib/libdmx-1.1.0.tar.xz +-rw-r--r-- 1 root root 206344 2009-10-13 20:50 ./source/x/x11/src/lib/libfontenc-1.0.5.tar.xz +-rw-r--r-- 1 root root 247960 2009-12-15 00:48 ./source/x/x11/src/lib/libpciaccess-0.11.0.tar.xz +-rw-r--r-- 1 root root 235860 2009-10-13 20:47 ./source/x/x11/src/lib/libxkbfile-1.0.6.tar.xz -rw-r--r-- 1 root root 168088 2006-04-27 00:18 ./source/x/x11/src/lib/libxkbui-1.0.2.tar.xz --rw-r--r-- 1 root root 306896 2009-07-21 18:10 ./source/x/x11/src/lib/pixman-0.15.18.tar.xz --rw-r--r-- 1 root root 100236 2009-08-01 00:28 ./source/x/x11/src/lib/xtrans-1.2.4.tar.xz -drwxr-xr-x 2 root root 4096 2009-08-01 03:33 ./source/x/x11/src/proto --rw-r--r-- 1 root root 34512 2006-01-18 23:51 ./source/x/x11/src/proto/bigreqsproto-1.0.2.tar.xz --rw-r--r-- 1 root root 42816 2007-07-03 21:20 ./source/x/x11/src/proto/compositeproto-0.4.tar.xz --rw-r--r-- 1 root root 39112 2007-01-10 00:48 ./source/x/x11/src/proto/damageproto-1.1.0.tar.xz --rw-r--r-- 1 root root 36948 2006-01-18 23:51 ./source/x/x11/src/proto/dmxproto-2.2.2.tar.xz --rw-r--r-- 1 root root 47952 2009-07-09 19:55 ./source/x/x11/src/proto/dri2proto-2.1.tar.xz --rw-r--r-- 1 root root 35232 2006-01-18 23:51 ./source/x/x11/src/proto/evieext-1.0.2.tar.xz --rw-r--r-- 1 root root 36216 2009-08-01 03:33 ./source/x/x11/src/proto/fixesproto-4.0.tar.xz --rw-r--r-- 1 root root 35784 2006-01-18 23:51 ./source/x/x11/src/proto/fontcacheproto-0.1.2.tar.xz --rw-r--r-- 1 root root 41984 2006-01-18 23:51 ./source/x/x11/src/proto/fontsproto-2.0.2.tar.xz --rw-r--r-- 1 root root 62416 2009-05-26 21:17 ./source/x/x11/src/proto/glproto-1.4.10.tar.xz --rw-r--r-- 1 root root 58048 2009-06-18 01:52 ./source/x/x11/src/proto/inputproto-1.5.1.tar.xz --rw-r--r-- 1 root root 54644 2006-07-18 19:24 ./source/x/x11/src/proto/kbproto-1.0.3.tar.xz +-rw-r--r-- 1 root root 324812 2010-02-08 16:24 ./source/x/x11/src/lib/pixman-0.16.6.tar.xz +-rw-r--r-- 1 root root 133516 2009-10-17 20:53 ./source/x/x11/src/lib/xtrans-1.2.5.tar.xz +drwxr-xr-x 2 root root 4096 2010-02-20 20:59 ./source/x/x11/src/proto +-rw-r--r-- 1 root root 45352 2009-10-13 20:54 ./source/x/x11/src/proto/bigreqsproto-1.1.0.tar.xz +-rw-r--r-- 1 root root 83536 2009-10-13 20:53 ./source/x/x11/src/proto/compositeproto-0.4.1.tar.xz +-rw-r--r-- 1 root root 49856 2009-10-13 20:53 ./source/x/x11/src/proto/damageproto-1.2.0.tar.xz +-rw-r--r-- 1 root root 77568 2009-10-13 20:53 ./source/x/x11/src/proto/dmxproto-2.3.tar.xz +-rw-r--r-- 1 root root 89040 2010-02-16 12:43 ./source/x/x11/src/proto/dri2proto-2.3.tar.xz +-rw-r--r-- 1 root root 45700 2009-10-13 20:53 ./source/x/x11/src/proto/evieext-1.1.0.tar.xz +-rw-r--r-- 1 root root 84688 2009-10-13 20:53 ./source/x/x11/src/proto/fixesproto-4.1.1.tar.xz +-rw-r--r-- 1 root root 78004 2009-10-13 20:53 ./source/x/x11/src/proto/fontcacheproto-0.1.3.tar.xz +-rw-r--r-- 1 root root 52452 2009-10-13 20:53 ./source/x/x11/src/proto/fontsproto-2.1.0.tar.xz +-rw-r--r-- 1 root root 99360 2010-01-08 20:15 ./source/x/x11/src/proto/glproto-1.4.11.tar.xz +-rw-r--r-- 1 root root 133108 2009-10-13 20:53 ./source/x/x11/src/proto/inputproto-2.0.tar.xz +-rw-r--r-- 1 root root 97856 2009-10-13 20:52 ./source/x/x11/src/proto/kbproto-1.0.4.tar.xz -rw-r--r-- 1 root root 46304 2008-03-06 21:25 ./source/x/x11/src/proto/printproto-1.0.4.tar.xz --rw-r--r-- 1 root root 70912 2009-03-06 14:05 ./source/x/x11/src/proto/randrproto-1.3.0.tar.xz --rw-r--r-- 1 root root 36812 2006-01-18 23:51 ./source/x/x11/src/proto/recordproto-1.13.2.tar.xz +-rw-r--r-- 1 root root 102864 2009-10-13 20:53 ./source/x/x11/src/proto/randrproto-1.3.1.tar.xz +-rw-r--r-- 1 root root 78044 2009-10-13 20:53 ./source/x/x11/src/proto/recordproto-1.14.tar.xz -rw-r--r-- 1 root root 60804 2009-07-15 03:54 ./source/x/x11/src/proto/renderproto-0.11.tar.xz --rw-r--r-- 1 root root 34692 2006-01-18 23:51 ./source/x/x11/src/proto/resourceproto-1.0.2.tar.xz --rw-r--r-- 1 root root 35612 2006-04-01 21:43 ./source/x/x11/src/proto/scrnsaverproto-1.1.0.tar.xz +-rw-r--r-- 1 root root 45400 2009-10-13 20:54 ./source/x/x11/src/proto/resourceproto-1.1.0.tar.xz +-rw-r--r-- 1 root root 46192 2009-10-13 20:54 ./source/x/x11/src/proto/scrnsaverproto-1.2.0.tar.xz -rw-r--r-- 1 root root 45604 2006-01-18 23:51 ./source/x/x11/src/proto/trapproto-3.4.3.tar.xz --rw-r--r-- 1 root root 39784 2006-01-18 23:51 ./source/x/x11/src/proto/videoproto-2.2.2.tar.xz --rw-r--r-- 1 root root 34604 2006-01-18 23:51 ./source/x/x11/src/proto/xcmiscproto-1.1.2.tar.xz --rw-r--r-- 1 root root 75732 2009-01-29 18:57 ./source/x/x11/src/proto/xextproto-7.0.5.tar.xz --rw-r--r-- 1 root root 35220 2006-01-18 23:51 ./source/x/x11/src/proto/xf86bigfontproto-1.1.2.tar.xz --rw-r--r-- 1 root root 40624 2007-09-05 17:14 ./source/x/x11/src/proto/xf86dgaproto-2.0.3.tar.xz --rw-r--r-- 1 root root 40948 2008-04-01 17:44 ./source/x/x11/src/proto/xf86driproto-2.0.4.tar.xz --rw-r--r-- 1 root root 36128 2006-01-18 23:51 ./source/x/x11/src/proto/xf86miscproto-0.9.2.tar.xz +-rw-r--r-- 1 root root 50424 2009-10-13 20:53 ./source/x/x11/src/proto/videoproto-2.3.0.tar.xz +-rw-r--r-- 1 root root 45476 2009-10-13 20:54 ./source/x/x11/src/proto/xcmiscproto-1.2.0.tar.xz +-rw-r--r-- 1 root root 66544 2009-10-13 20:54 ./source/x/x11/src/proto/xextproto-7.1.1.tar.xz +-rw-r--r-- 1 root root 45976 2009-10-13 20:53 ./source/x/x11/src/proto/xf86bigfontproto-1.2.0.tar.xz +-rw-r--r-- 1 root root 79572 2009-10-13 20:53 ./source/x/x11/src/proto/xf86dgaproto-2.1.tar.xz +-rw-r--r-- 1 root root 46724 2009-10-13 20:53 ./source/x/x11/src/proto/xf86driproto-2.1.0.tar.xz +-rw-r--r-- 1 root root 78424 2009-10-13 20:53 ./source/x/x11/src/proto/xf86miscproto-0.9.3.tar.xz -rw-r--r-- 1 root root 35400 2006-01-18 23:51 ./source/x/x11/src/proto/xf86rushproto-1.1.2.tar.xz --rw-r--r-- 1 root root 37040 2006-01-18 23:51 ./source/x/x11/src/proto/xf86vidmodeproto-2.2.2.tar.xz --rw-r--r-- 1 root root 35832 2006-01-18 23:51 ./source/x/x11/src/proto/xineramaproto-1.1.2.tar.xz --rw-r--r-- 1 root root 141528 2009-03-02 19:02 ./source/x/x11/src/proto/xproto-7.0.15.tar.xz --rw-r--r-- 1 root root 34688 2006-01-18 23:51 ./source/x/x11/src/proto/xproxymanagementprotocol-1.0.2.tar.xz -drwxr-xr-x 2 root root 4096 2009-07-09 18:51 ./source/x/x11/src/util +-rw-r--r-- 1 root root 78020 2009-10-13 20:53 ./source/x/x11/src/proto/xf86vidmodeproto-2.3.tar.xz +-rw-r--r-- 1 root root 77328 2009-10-13 20:53 ./source/x/x11/src/proto/xineramaproto-1.2.tar.xz +-rw-r--r-- 1 root root 142100 2009-10-13 20:53 ./source/x/x11/src/proto/xproto-7.0.16.tar.xz +-rw-r--r-- 1 root root 77844 2009-10-13 20:52 ./source/x/x11/src/proto/xproxymanagementprotocol-1.0.3.tar.xz +drwxr-xr-x 2 root root 4096 2010-04-16 03:23 ./source/x/x11/src/util -rw-r--r-- 1 root root 65616 2006-05-19 18:42 ./source/x/x11/src/util/gccmakedep-1.0.2.tar.xz --rw-r--r-- 1 root root 105808 2006-05-19 18:45 ./source/x/x11/src/util/imake-1.0.2.tar.xz +-rw-r--r-- 1 root root 128768 2010-04-16 03:01 ./source/x/x11/src/util/imake-1.0.3.tar.xz -rw-r--r-- 1 root root 70672 2006-01-18 23:51 ./source/x/x11/src/util/lndir-1.0.1.tar.xz --rw-r--r-- 1 root root 101024 2007-03-21 20:43 ./source/x/x11/src/util/makedepend-1.0.1.tar.xz --rw-r--r-- 1 root root 46276 2009-06-18 20:05 ./source/x/x11/src/util/util-macros-1.2.2.tar.xz --rw-r--r-- 1 root root 235664 2006-05-19 18:41 ./source/x/x11/src/util/xorg-cf-files-1.0.2.tar.xz -drwxr-xr-x 2 root root 4096 2009-05-29 06:37 ./source/x/x11/src/xcb --rw-r--r-- 1 root root 278996 2009-05-29 06:30 ./source/x/x11/src/xcb/libxcb-1.3.tar.xz --rw-r--r-- 1 root root 87048 2009-05-29 06:15 ./source/x/x11/src/xcb/xcb-proto-1.5.tar.xz --rw-r--r-- 1 root root 234900 2009-05-29 06:37 ./source/x/x11/src/xcb/xcb-util-0.3.5.tar.xz --rw-r--r-- 1 root root 244308 2009-04-08 04:28 ./source/x/x11/src/xcb/xpyb-1.1.tar.xz -drwxr-xr-x 2 root root 4096 2009-08-01 20:47 ./source/x/x11/src/xserver --rw-r--r-- 1 root root 3760472 2009-08-01 12:59 ./source/x/x11/src/xserver/xorg-server-1.6.3.tar.xz --rwxr-xr-x 1 root root 10950 2009-08-04 00:10 ./source/x/x11/x11.SlackBuild +-rw-r--r-- 1 root root 107208 2009-10-13 20:55 ./source/x/x11/src/util/makedepend-1.0.2.tar.xz +-rw-r--r-- 1 root root 58968 2010-04-05 13:28 ./source/x/x11/src/util/util-macros-1.7.0.tar.xz +-rw-r--r-- 1 root root 301996 2009-10-14 18:33 ./source/x/x11/src/util/xorg-cf-files-1.0.3.tar.xz +drwxr-xr-x 2 root root 4096 2010-04-27 20:51 ./source/x/x11/src/xcb +-rw-r--r-- 1 root root 185164 2009-10-14 09:16 ./source/x/x11/src/xcb/libpthread-stubs-0.3.tar.xz +-rw-r--r-- 1 root root 284004 2010-04-09 15:03 ./source/x/x11/src/xcb/libxcb-1.6.tar.xz +-rw-r--r-- 1 root root 90692 2009-12-02 09:10 ./source/x/x11/src/xcb/xcb-proto-1.6.tar.xz +-rw-r--r-- 1 root root 238932 2009-08-24 08:51 ./source/x/x11/src/xcb/xcb-util-0.3.6.tar.xz +-rw-r--r-- 1 root root 251920 2009-12-17 19:54 ./source/x/x11/src/xcb/xpyb-1.2.tar.xz +drwxr-xr-x 2 root root 4096 2010-05-05 06:50 ./source/x/x11/src/xserver +-rw-r--r-- 1 root root 3945780 2010-05-04 07:51 ./source/x/x11/src/xserver/xorg-server-1.7.7.tar.xz +-rwxr-xr-x 1 root root 12129 2010-02-22 17:35 ./source/x/x11/x11.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/xaw3d -rw-r--r-- 1 root root 5180 2008-11-04 15:06 ./source/x/xaw3d/Xaw3d-1.5-debian-fixes.diff.gz -rw-r--r-- 1 root root 579 2008-11-04 15:02 ./source/x/xaw3d/Xaw3d-1.5E.diff.gz -rw-r--r-- 1 root root 309264 2008-11-04 14:57 ./source/x/xaw3d/Xaw3d-1.5E.tar.gz -rw-r--r-- 1 root root 975 2002-03-23 23:45 ./source/x/xaw3d/slack-desc -rwxr-xr-x 1 root root 3773 2009-05-19 20:05 ./source/x/xaw3d/xaw3d.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/x/xdg-utils +drwxr-xr-x 2 root root 4096 2010-05-06 19:28 ./source/x/xdg-utils -rw-r--r-- 1 root root 1432 2009-02-02 23:25 ./source/x/xdg-utils/doinst.sh.gz -rw-r--r-- 1 root root 1010 2008-08-01 05:42 ./source/x/xdg-utils/slack-desc --rw-r--r-- 1 root root 284747 2009-02-02 23:19 ./source/x/xdg-utils/xdg-utils-20090202cvs.tar.bz2 +-rw-r--r-- 1 root root 291993 2010-05-06 19:26 ./source/x/xdg-utils/xdg-utils-20100506cvs.tar.bz2 -rwxr-xr-x 1 root root 327 2009-02-02 19:15 ./source/x/xdg-utils/xdg-utils-cvs_checkout.sh --rwxr-xr-x 1 root root 2310 2009-05-19 20:05 ./source/x/xdg-utils/xdg-utils.SlackBuild +-rwxr-xr-x 1 root root 2316 2010-05-06 19:28 ./source/x/xdg-utils/xdg-utils.SlackBuild -rw-r--r-- 1 root root 121 2008-07-12 04:41 ./source/x/xdg-utils/xdg-utils.info -drwxr-xr-x 3 root root 4096 2009-06-03 19:52 ./source/x/xterm -drwxr-xr-x 2 root root 4096 2008-02-21 20:54 ./source/x/xterm/patches +drwxr-xr-x 2 root root 4096 2010-04-27 21:51 ./source/x/xf86-video-nouveau +-rw-r--r-- 1 root root 567 2010-04-27 21:40 ./source/x/xf86-video-nouveau/this_is_NOT_a_driver.txt +-rw-r--r-- 1 root root 880 2010-04-27 21:47 ./source/x/xf86-video-nouveau/xf86-video-nouveau-blacklist-noarch-1.txz +drwxr-xr-x 2 root root 4096 2010-05-06 07:56 ./source/x/xterm -rw-r--r-- 1 root root 764 2007-02-11 23:54 ./source/x/xterm/slack-desc --rw-r--r-- 1 root root 612032 2009-03-28 20:18 ./source/x/xterm/xterm-243.tar.xz --rwxr-xr-x 1 root root 3428 2009-06-09 00:02 ./source/x/xterm/xterm.SlackBuild -drwxr-xr-x 47 root root 4096 2009-08-18 23:17 ./source/xap -drwxr-xr-x 2 root root 4096 2009-06-25 23:48 ./source/xap/MPlayer +-rw-r--r-- 1 root root 643104 2010-05-02 01:30 ./source/x/xterm/xterm-258.tar.xz +-rwxr-xr-x 1 root root 3775 2010-02-22 00:53 ./source/x/xterm/xterm.SlackBuild +drwxr-xr-x 49 root root 4096 2010-05-02 07:56 ./source/xap +drwxr-xr-x 2 root root 4096 2010-02-19 07:03 ./source/xap/MPlayer -rw-r--r-- 1 root root 222567 2006-12-23 03:06 ./source/xap/MPlayer/Blue-1.7.tar.bz2 --rwxr-xr-- 1 root root 15071 2009-06-26 00:11 ./source/xap/MPlayer/MPlayer.SlackBuild --rw-r--r-- 1 root root 6987244 2009-06-25 23:48 ./source/xap/MPlayer/MPlayer_nolibdvdcss-r29390.tar.xz +-rwxr-xr-- 1 root root 15475 2010-02-19 07:04 ./source/xap/MPlayer/MPlayer.SlackBuild +-rw-r--r-- 1 root root 7488308 2010-02-19 06:03 ./source/xap/MPlayer/MPlayer_nolibdvdcss-20100218.tar.xz -rw-r--r-- 1 root root 937 2009-05-15 20:43 ./source/xap/MPlayer/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/audacious -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/audacious-plugins --rw-r--r-- 1 root root 238 2008-11-29 20:13 ./source/xap/audacious-plugins/amidi-plug.fix-drct.diff.gz --rw-r--r-- 1 root root 2239522 2008-05-23 22:38 ./source/xap/audacious-plugins/audacious-plugins-1.5.1.tar.bz2 --rwxr-xr-x 1 root root 3608 2009-05-19 20:05 ./source/xap/audacious-plugins/audacious-plugins.SlackBuild --rw-r--r-- 1 root root 345 2008-09-14 19:29 ./source/xap/audacious-plugins/audacious-plugins.libmtp8.diff.gz +drwxr-xr-x 2 root root 4096 2010-04-09 21:15 ./source/xap/audacious +drwxr-xr-x 2 root root 4096 2010-04-09 21:31 ./source/xap/audacious-plugins +-rw-r--r-- 1 root root 2027560 2010-04-06 19:23 ./source/xap/audacious-plugins/audacious-plugins-2.3.tar.xz +-rwxr-xr-x 1 root root 3738 2010-04-09 21:31 ./source/xap/audacious-plugins/audacious-plugins.SlackBuild -rw-r--r-- 1 root root 892 2007-03-08 06:08 ./source/xap/audacious-plugins/slack-desc --rw-r--r-- 1 root root 1374028 2008-05-23 21:54 ./source/xap/audacious/audacious-1.5.1.tar.bz2 --rwxr-xr-x 1 root root 3739 2009-05-19 20:05 ./source/xap/audacious/audacious.SlackBuild --rw-r--r-- 1 root root 406 2009-04-10 22:03 ./source/xap/audacious/audacious.handle_cmd_line_options.diff.gz +-rw-r--r-- 1 root root 937104 2010-04-06 19:20 ./source/xap/audacious/audacious-2.3.tar.xz +-rwxr-xr-x 1 root root 4074 2010-04-09 21:21 ./source/xap/audacious/audacious.SlackBuild +-rw-r--r-- 1 root root 121 2010-04-09 21:15 ./source/xap/audacious/doinst.sh.gz -rw-r--r-- 1 root root 1075 2007-03-08 05:46 ./source/xap/audacious/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/blackbox --rw-r--r-- 1 root root 185230 2002-11-04 01:43 ./source/xap/blackbox/bbkeys-0.8.6.tar.gz --rw-r--r-- 1 root root 292950 2002-09-18 18:11 ./source/xap/blackbox/blackbox-0.65.0.tar.gz --rwxr-xr-x 1 root root 4112 2009-05-19 20:05 ./source/xap/blackbox/blackbox.SlackBuild --rw-r--r-- 1 root root 72210 2005-01-19 03:32 ./source/xap/blackbox/blackbox_0.65.0-5.diff.gz +drwxr-xr-x 2 root root 4096 2010-02-08 00:05 ./source/xap/blackbox +-rw-r--r-- 1 root root 176564 2009-09-03 11:39 ./source/xap/blackbox/bbkeys-0.9.1.tar.xz +-rw-r--r-- 1 root root 964 2009-09-03 11:39 ./source/xap/blackbox/blackbox-0.70.1-gcc-4.3.patch.gz +-rw-r--r-- 1 root root 409496 2009-09-03 11:39 ./source/xap/blackbox/blackbox-0.70.1.tar.xz +-rwxr-xr-x 1 root root 6282 2010-02-07 22:55 ./source/xap/blackbox/blackbox.SlackBuild -rw-r--r-- 1 root root 900 2002-05-05 23:41 ./source/xap/blackbox/slack-desc --rw-r--r-- 1 root root 288 2007-02-07 04:58 ./source/xap/blackbox/xinitrc.blackbox.gz -drwxr-xr-x 2 root root 4096 2009-07-01 20:18 ./source/xap/electricsheep +-rw-r--r-- 1 root root 287 2010-02-08 00:05 ./source/xap/blackbox/xinitrc.blackbox.gz +drwxr-xr-x 2 root root 4096 2010-05-02 07:44 ./source/xap/blueman +-rw-r--r-- 1 root root 556944 2009-10-21 18:29 ./source/xap/blueman/blueman-1.21.tar.xz +-rw-r--r-- 1 root root 3648 2010-04-15 04:30 ./source/xap/blueman/blueman-open +-rw-r--r-- 1 root root 330 2010-04-11 04:24 ./source/xap/blueman/blueman-use_blueman-open_for_obexfs.diff.gz +-rwxr-xr-x 1 root root 4664 2010-05-02 21:48 ./source/xap/blueman/blueman.SlackBuild +-rw-r--r-- 1 root root 361 2009-10-31 03:20 ./source/xap/blueman/doinst.sh.gz +-rw-r--r-- 1 root root 667 2009-12-11 19:15 ./source/xap/blueman/fix_on_off_loop.diff.gz +-rw-r--r-- 1 root root 503 2009-12-06 09:49 ./source/xap/blueman/no_hide_applet.diff.gz +-rw-r--r-- 1 root root 882 2010-05-02 07:44 ./source/xap/blueman/slack-desc +drwxr-xr-x 2 root root 4096 2010-02-19 18:36 ./source/xap/electricsheep -rw-r--r-- 1 root root 1306 2009-01-07 22:42 ./source/xap/electricsheep/README.slackware -rw-r--r-- 1 root root 3116176 2009-03-06 00:30 ./source/xap/electricsheep/electricsheep-20090306.tar.xz --rwxr-xr-- 1 root root 9392 2009-07-01 20:27 ./source/xap/electricsheep/electricsheep.SlackBuild +-rwxr-xr-- 1 root root 9750 2010-02-19 18:37 ./source/xap/electricsheep/electricsheep.SlackBuild -rw-r--r-- 1 root root 268 2009-07-01 19:53 ./source/xap/electricsheep/electricsheep.mplayer.diff.gz -rw-r--r-- 1 root root 524 2009-01-07 21:38 ./source/xap/electricsheep/electricsheep_gnome-open.patch -rw-r--r-- 1 root root 1116 2008-12-15 23:44 ./source/xap/electricsheep/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/fluxbox +drwxr-xr-x 2 root root 4096 2009-12-01 07:32 ./source/xap/fluxbox -rw-r--r-- 1 root root 777660 2008-09-19 16:00 ./source/xap/fluxbox/fluxbox-1.1.1.tar.bz2 --rwxr-xr-x 1 root root 2765 2009-05-19 20:05 ./source/xap/fluxbox/fluxbox.SlackBuild +-rwxr-xr-x 1 root root 3138 2010-01-16 00:40 ./source/xap/fluxbox/fluxbox.SlackBuild -rw-r--r-- 1 root root 687 2005-07-21 19:03 ./source/xap/fluxbox/slack-desc --rw-r--r-- 1 root root 289 2007-02-07 04:48 ./source/xap/fluxbox/xinitrc.fluxbox.gz +-rw-r--r-- 1 root root 287 2009-12-01 07:31 ./source/xap/fluxbox/xinitrc.fluxbox.gz drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/fvwm -rw-r--r-- 1 root root 23007 2007-02-18 02:02 ./source/xap/fvwm/ancient-icons.tar.gz -rw-r--r-- 1 root root 279 2004-04-05 01:55 ./source/xap/fvwm/doinst.sh.gz @@ -8681,88 +8976,91 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/fvwm -rw-r--r-- 1 root root 792 2008-02-11 03:44 ./source/xap/fvwm/slack-desc -rw-r--r-- 1 root root 7625 2007-02-18 02:15 ./source/xap/fvwm/system.fvwm2rc.gz -rw-r--r-- 1 root root 291 2007-02-18 02:12 ./source/xap/fvwm/xinitrc.fvwm2.gz +drwxr-xr-x 2 root root 4096 2010-03-11 23:20 ./source/xap/geeqie +-rw-r--r-- 1 root root 163 2010-03-11 23:20 ./source/xap/geeqie/doinst.sh.gz +-rw-r--r-- 1 root root 1078384 2010-03-11 22:47 ./source/xap/geeqie/geeqie-1.0.tar.xz +-rwxr-xr-x 1 root root 3594 2010-03-13 21:14 ./source/xap/geeqie/geeqie.SlackBuild +-rw-r--r-- 1 root root 776 2010-03-11 23:23 ./source/xap/geeqie/slack-desc drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/xap/gftp -rw-r--r-- 1 root root 1687167 2008-12-02 14:07 ./source/xap/gftp/gftp-2.0.19.tar.bz2 -rwxr-xr-x 1 root root 2997 2009-05-23 00:41 ./source/xap/gftp/gftp.SlackBuild -rw-r--r-- 1 root root 304 2008-12-02 20:08 ./source/xap/gftp/gftp.desktop.gz -rw-r--r-- 1 root root 899 2008-02-11 03:44 ./source/xap/gftp/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/gimp --rw-r--r-- 1 root root 16075908 2009-03-16 21:56 ./source/xap/gimp/gimp-2.6.6.tar.bz2 --rwxr-xr-x 1 root root 3223 2009-06-09 19:03 ./source/xap/gimp/gimp.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-16 04:54 ./source/xap/gimp +-rw-r--r-- 1 root root 12405172 2009-12-10 21:26 ./source/xap/gimp/gimp-2.6.8.tar.xz +-rwxr-xr-x 1 root root 3856 2010-02-16 04:56 ./source/xap/gimp/gimp.SlackBuild +-rw-r--r-- 1 root root 309 2010-02-16 04:54 ./source/xap/gimp/gimp.png14.diff.gz -rw-r--r-- 1 root root 928 2003-01-29 03:18 ./source/xap/gimp/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/gkrellm --rw-r--r-- 1 root root 747697 2008-10-04 02:03 ./source/xap/gkrellm/gkrellm-2.3.2.tar.bz2 +drwxr-xr-x 2 root root 4096 2010-03-31 04:43 ./source/xap/gkrellm +-rw-r--r-- 1 root root 757875 2010-01-04 23:34 ./source/xap/gkrellm/gkrellm-2.3.4.tar.bz2 -rw-r--r-- 1 root root 12374 2004-02-01 16:30 ./source/xap/gkrellm/gkrellm-countdown-0.1.1.tar.gz --rwxr-xr-x 1 root root 3712 2009-05-19 20:05 ./source/xap/gkrellm/gkrellm.SlackBuild +-rwxr-xr-x 1 root root 4591 2010-03-31 04:46 ./source/xap/gkrellm/gkrellm.SlackBuild -rw-r--r-- 1 root root 211 2008-10-26 01:35 ./source/xap/gkrellm/gkrellm.theme.defaults.diff.gz -rw-r--r-- 1 root root 971 2004-04-29 18:52 ./source/xap/gkrellm/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/xap/gnuchess +drwxr-xr-x 2 root root 4096 2010-02-20 04:12 ./source/xap/gnuchess -rw-r--r-- 1 root root 142963 2004-01-19 11:50 ./source/xap/gnuchess/Sjeng-Free-11.2.tar.bz2 -rw-r--r-- 1 root root 652 2004-10-27 05:47 ./source/xap/gnuchess/chess.png --rw-r--r-- 1 root root 428502 2007-01-22 18:04 ./source/xap/gnuchess/eboard-1.0.3.tar.bz2 +-rw-r--r-- 1 root root 462386 2008-02-22 15:57 ./source/xap/gnuchess/eboard-1.1.1.tar.bz2 +-rw-r--r-- 1 root root 458 2010-02-20 03:54 ./source/xap/gnuchess/eboard.assert.diff.gz -rw-r--r-- 1 root root 224 2004-10-27 06:07 ./source/xap/gnuchess/eboard.desktop -rw-r--r-- 1 root root 193507 2003-08-07 14:15 ./source/xap/gnuchess/gnuchess-5.07.tar.bz2 --rwxr-xr-x 1 root root 5563 2009-05-23 00:41 ./source/xap/gnuchess/gnuchess.SlackBuild +-rwxr-xr-x 1 root root 6024 2010-02-20 03:57 ./source/xap/gnuchess/gnuchess.SlackBuild -rw-r--r-- 1 root root 1229 2007-05-16 00:54 ./source/xap/gnuchess/gnuchess.SlackBuild.diff.gz -rw-r--r-- 1 root root 241 2007-05-16 00:54 ./source/xap/gnuchess/gnuchess.gcc4_fix.diff.gz +-rw-r--r-- 1 root root 570 2010-02-20 03:37 ./source/xap/gnuchess/gnuchess.getline.glibc.diff.gz -rw-r--r-- 1 root root 796 2004-10-27 22:53 ./source/xap/gnuchess/slack-desc --rw-r--r-- 1 root root 786236 2004-10-27 22:40 ./source/xap/gnuchess/xboard-4.2.7.tar.bz2 --rw-r--r-- 1 root root 1311 2007-05-16 00:54 ./source/xap/gnuchess/xboard.buffer_overflow_fix.diff.gz +-rw-r--r-- 1 root root 1165580 2009-12-08 05:49 ./source/xap/gnuchess/xboard-4.4.2.tar.xz -rw-r--r-- 1 root root 224 2004-10-27 06:04 ./source/xap/gnuchess/xboard.desktop --rw-r--r-- 1 root root 310 2004-10-27 22:40 ./source/xap/gnuchess/xboard.infodir.diff.gz -drwxr-xr-x 2 root root 4096 2009-08-10 23:29 ./source/xap/gnuplot --rw-r--r-- 1 root root 1926696 2009-03-30 05:16 ./source/xap/gnuplot/gnuplot-4.2.5.tar.xz --rwxr-xr-x 1 root root 3411 2009-08-11 00:48 ./source/xap/gnuplot/gnuplot.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-02 22:28 ./source/xap/gnuplot +-rw-r--r-- 1 root root 1940516 2009-09-03 03:04 ./source/xap/gnuplot/gnuplot-4.2.6.tar.xz +-rwxr-xr-x 1 root root 3728 2010-03-03 17:52 ./source/xap/gnuplot/gnuplot.SlackBuild -rw-r--r-- 1 root root 1105 2002-03-16 08:23 ./source/xap/gnuplot/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/gqview --rw-r--r-- 1 root root 158 2007-02-18 22:16 ./source/xap/gqview/doinst.sh.gz --rw-r--r-- 1 root root 1101019 2006-12-03 02:19 ./source/xap/gqview/gqview-2.1.5.tar.bz2 --rwxr-xr-x 1 root root 3148 2009-05-19 20:05 ./source/xap/gqview/gqview.SlackBuild --rw-r--r-- 1 root root 729 2007-04-01 22:31 ./source/xap/gqview/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-09 05:40 ./source/xap/gucharmap +drwxr-xr-x 2 root root 4096 2010-02-16 04:11 ./source/xap/gucharmap -rw-r--r-- 1 root root 121 2009-03-23 15:07 ./source/xap/gucharmap/doinst.sh.gz --rw-r--r-- 1 root root 2429228 2009-05-18 20:37 ./source/xap/gucharmap/gucharmap-2.26.2.tar.xz --rwxr-xr-x 1 root root 2832 2009-06-09 06:20 ./source/xap/gucharmap/gucharmap.SlackBuild +-rw-r--r-- 1 root root 2482264 2009-12-14 21:34 ./source/xap/gucharmap/gucharmap-2.28.2.tar.xz +-rwxr-xr-x 1 root root 3509 2010-02-16 04:12 ./source/xap/gucharmap/gucharmap.SlackBuild -rw-r--r-- 1 root root 669 2004-10-13 19:31 ./source/xap/gucharmap/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/gv --rw-r--r-- 1 root root 378928 2009-03-22 09:11 ./source/xap/gv/gv-3.6.7.tar.xz --rwxr-xr-x 1 root root 3221 2009-05-19 20:05 ./source/xap/gv/gv.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-09 19:59 ./source/xap/gv +-rw-r--r-- 1 root root 398180 2010-04-24 16:17 ./source/xap/gv/gv-3.6.9.tar.xz +-rwxr-xr-x 1 root root 3840 2010-05-09 20:00 ./source/xap/gv/gv.SlackBuild -rw-r--r-- 1 root root 823 2002-03-15 04:27 ./source/xap/gv/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/gxine -rw-r--r-- 1 root root 1112012 2008-06-12 21:44 ./source/xap/gxine/gxine-0.5.903.tar.bz2 -rwxr-xr-x 1 root root 3142 2009-06-10 01:22 ./source/xap/gxine/gxine.SlackBuild -rw-r--r-- 1 root root 453 2006-02-02 19:36 ./source/xap/gxine/gxine.desktop.gz -rw-r--r-- 1 root root 792 2003-09-23 02:20 ./source/xap/gxine/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-15 01:56 ./source/xap/imagemagick --rw-r--r-- 1 root root 5842976 2009-06-06 00:42 ./source/xap/imagemagick/ImageMagick-6.5.3-3.tar.xz --rwxr-xr-x 1 root root 4503 2009-06-09 05:49 ./source/xap/imagemagick/imagemagick.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-17 21:12 ./source/xap/imagemagick +-rw-r--r-- 1 root root 6230060 2010-02-16 11:56 ./source/xap/imagemagick/ImageMagick-6.5.9-6.tar.xz +-rwxr-xr-x 1 root root 5106 2010-02-17 21:15 ./source/xap/imagemagick/imagemagick.SlackBuild -rw-r--r-- 1 root root 1002 2004-04-11 20:51 ./source/xap/imagemagick/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-03 18:45 ./source/xap/mozilla-firefox --rw-r--r-- 1 root root 46787928 2009-07-30 15:35 ./source/xap/mozilla-firefox/firefox-3.5.2-source.tar.bz2 --rw-r--r-- 1 root root 194 2009-07-31 00:28 ./source/xap/mozilla-firefox/firefox-3.5.2-source.tar.bz2.asc +drwxr-xr-x 2 root root 4096 2010-04-02 20:30 ./source/xap/mozilla-firefox +-rw-r--r-- 1 root root 48633061 2010-04-02 11:04 ./source/xap/mozilla-firefox/firefox-3.6.3.source.tar.bz2 +-rw-r--r-- 1 root root 194 2010-04-02 11:04 ./source/xap/mozilla-firefox/firefox-3.6.3.source.tar.bz2.asc -rw-r--r-- 1 root root 327 2008-06-17 17:19 ./source/xap/mozilla-firefox/firefox.moz_plugin_path.diff.gz -rw-r--r-- 1 root root 24263 2009-06-18 08:34 ./source/xap/mozilla-firefox/firefox.png -rw-r--r-- 1 root root 462 2009-07-01 06:05 ./source/xap/mozilla-firefox/mimeTypes.rdf.gz -rw-r--r-- 1 root root 680 2009-07-01 13:28 ./source/xap/mozilla-firefox/mozilla-firefox-mimeTypes-fix.diff.gz --rwxr-xr-x 1 root root 6060 2009-08-03 18:45 ./source/xap/mozilla-firefox/mozilla-firefox.SlackBuild +-rwxr-xr-x 1 root root 6405 2010-01-21 19:17 ./source/xap/mozilla-firefox/mozilla-firefox.SlackBuild -rw-r--r-- 1 root root 2620 2009-07-01 06:10 ./source/xap/mozilla-firefox/mozilla-firefox.desktop -rw-r--r-- 1 root root 993 2005-03-08 04:51 ./source/xap/mozilla-firefox/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-20 21:40 ./source/xap/mozilla-thunderbird --rw-r--r-- 1 root root 308 2005-12-09 22:22 ./source/xap/mozilla-thunderbird/mozilla-thunderbird-firefox.diff.gz --rwxr-xr-x 1 root root 4561 2009-08-20 21:40 ./source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild +drwxr-xr-x 2 root root 4096 2010-04-02 01:53 ./source/xap/mozilla-thunderbird +-rw-r--r-- 1 root root 1586 2009-12-12 01:10 ./source/xap/mozilla-thunderbird/mimeTypes.rdf.gz +-rwxr-xr-x 1 root root 6001 2010-01-21 23:13 ./source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild -rw-r--r-- 1 root root 3378 2005-03-08 05:13 ./source/xap/mozilla-thunderbird/mozilla-thunderbird.desktop -rw-r--r-- 1 root root 1172 2005-03-08 04:50 ./source/xap/mozilla-thunderbird/slack-desc --rw-r--r-- 1 root root 38860245 2009-08-19 21:22 ./source/xap/mozilla-thunderbird/thunderbird-2.0.0.23-source.tar.bz2 --rw-r--r-- 1 root root 194 2009-08-19 21:42 ./source/xap/mozilla-thunderbird/thunderbird-2.0.0.23-source.tar.bz2.asc --rw-r--r-- 1 root root 2980 2005-03-08 22:19 ./source/xap/mozilla-thunderbird/thunderbird.png -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/pan +-rw-r--r-- 1 root root 61094371 2010-03-17 10:08 ./source/xap/mozilla-thunderbird/thunderbird-3.0.4.source.tar.bz2 +-rw-r--r-- 1 root root 323 2010-03-17 20:11 ./source/xap/mozilla-thunderbird/thunderbird-3.0.4.source.tar.bz2.asc +-rw-r--r-- 1 root root 47617 2006-02-18 17:00 ./source/xap/mozilla-thunderbird/thunderbird.png +drwxr-xr-x 2 root root 4096 2010-02-04 00:09 ./source/xap/pan -rw-r--r-- 1 root root 1452883 2008-07-30 02:46 ./source/xap/pan/pan-0.133.tar.bz2 --rwxr-xr-x 1 root root 3212 2009-05-19 20:05 ./source/xap/pan/pan.SlackBuild +-rwxr-xr-x 1 root root 3679 2010-02-04 00:11 ./source/xap/pan/pan.SlackBuild +-rw-r--r-- 1 root root 430 2010-02-04 00:09 ./source/xap/pan/pan.gcc44.diff.gz +-rw-r--r-- 1 root root 11893 2010-02-03 23:58 ./source/xap/pan/pan.gmime2.4.diff.gz -rw-r--r-- 1 root root 721 2008-02-11 03:44 ./source/xap/pan/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-19 17:56 ./source/xap/pidgin --rw-r--r-- 1 root root 6319964 2009-08-18 17:14 ./source/xap/pidgin/pidgin-2.5.9.tar.xz --rw-r--r-- 1 root root 586394 2008-03-09 08:03 ./source/xap/pidgin/pidgin-encryption-3.0.tar.gz --rwxr-xr-x 1 root root 5725 2009-08-19 17:59 ./source/xap/pidgin/pidgin.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-18 16:51 ./source/xap/pidgin +-rw-r--r-- 1 root root 7234248 2010-05-13 03:14 ./source/xap/pidgin/pidgin-2.7.0.tar.xz +-rw-r--r-- 1 root root 604129 2010-05-18 16:51 ./source/xap/pidgin/pidgin-encryption-3.1.tar.gz +-rwxr-xr-x 1 root root 6730 2010-05-18 16:52 ./source/xap/pidgin/pidgin.SlackBuild -rw-r--r-- 1 root root 321 2008-12-07 04:57 ./source/xap/pidgin/purple-allow-sign-rsa-md5.patch.gz -rw-r--r-- 1 root root 926 2008-03-09 08:06 ./source/xap/pidgin/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/rdesktop @@ -8774,23 +9072,30 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/rxvt -rwxr-xr-x 1 root root 3012 2009-06-09 19:32 ./source/xap/rxvt/rxvt.SlackBuild -rw-r--r-- 1 root root 2002 2003-06-08 04:09 ./source/xap/rxvt/rxvt.utempter.diff.gz -rw-r--r-- 1 root root 880 2002-03-10 07:02 ./source/xap/rxvt/slack-desc -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/xap/sane +drwxr-xr-x 2 root root 4096 2010-04-26 05:03 ./source/xap/sane -rw-r--r-- 1 root root 133 2006-09-23 08:33 ./source/xap/sane/dll.conf.additions.gz -rw-r--r-- 1 root root 285 2008-02-12 16:23 ./source/xap/sane/doinst.sh.gz --rw-r--r-- 1 root root 3126540 2008-02-12 02:12 ./source/xap/sane/sane-backends-1.0.19.tar.bz2 +-rw-r--r-- 1 root root 3911411 2010-04-26 02:38 ./source/xap/sane/sane-backends-1.0.21.tar.bz2 +-rw-r--r-- 1 root root 341 2010-01-20 01:54 ./source/xap/sane/sane-frontends-1.0.14-sane_cap_always_settable.diff.gz -rw-r--r-- 1 root root 190172 2005-09-18 07:21 ./source/xap/sane/sane-frontends-1.0.14.tar.bz2 --rwxr-xr-x 1 root root 4209 2009-05-23 00:41 ./source/xap/sane/sane.SlackBuild +-rwxr-xr-x 1 root root 4617 2010-04-26 05:13 ./source/xap/sane/sane.SlackBuild -rw-r--r-- 1 root root 776 2002-04-04 02:41 ./source/xap/sane/slack-desc -drwxr-xr-x 2 root root 4096 2009-06-24 18:25 ./source/xap/seamonkey +drwxr-xr-x 3 root root 4096 2010-04-02 19:51 ./source/xap/seamonkey -rw-r--r-- 1 root root 231 2007-06-01 23:47 ./source/xap/seamonkey/doinst.sh.gz --rw-r--r-- 1 root root 28513384 2009-06-06 21:58 ./source/xap/seamonkey/seamonkey-1.1.17.source.tar.xz +drwxr-xr-x 2 root root 4096 2009-11-06 05:06 ./source/xap/seamonkey/pkgconfig +-rw-r--r-- 1 root root 320 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-gtkmozembed.pc +-rw-r--r-- 1 root root 305 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-js.pc +-rw-r--r-- 1 root root 308 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-nspr.pc +-rw-r--r-- 1 root root 302 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-nss.pc +-rw-r--r-- 1 root root 276 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc +-rw-r--r-- 1 root root 372 2009-11-06 05:10 ./source/xap/seamonkey/pkgconfig/seamonkey-xpcom.pc +-rw-r--r-- 1 root root 49156288 2010-03-17 11:35 ./source/xap/seamonkey/seamonkey-2.0.4.source.tar.xz -rw-r--r-- 1 root root 12796 2006-02-09 03:17 ./source/xap/seamonkey/seamonkey-icon.png -rw-r--r-- 1 root root 185 2006-02-09 03:40 ./source/xap/seamonkey/seamonkey-mail-icon.png -rw-r--r-- 1 root root 207 2006-02-09 03:23 ./source/xap/seamonkey/seamonkey-mail.desktop --rwxr-xr-x 1 root root 8518 2009-06-24 18:46 ./source/xap/seamonkey/seamonkey.SlackBuild +-rwxr-xr-x 1 root root 8233 2010-04-02 19:53 ./source/xap/seamonkey/seamonkey.SlackBuild -rw-r--r-- 1 root root 178 2006-02-09 03:23 ./source/xap/seamonkey/seamonkey.desktop --rw-r--r-- 1 root root 333 2007-02-20 03:25 ./source/xap/seamonkey/seamonkey.moz_plugin_path.diff.gz --rw-r--r-- 1 root root 994 2006-02-09 02:07 ./source/xap/seamonkey/slack-desc +-rw-r--r-- 1 root root 894 2009-11-10 01:43 ./source/xap/seamonkey/slack-desc drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/seyon -rw-r--r-- 1 root root 713 1999-05-09 22:46 ./source/xap/seyon/seyon-2.20c.lsm -rw-r--r-- 1 root root 167487 1999-05-09 22:47 ./source/xap/seyon/seyon-2.20c.tar.gz @@ -8801,15 +9106,16 @@ drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/thunar-volman -rw-r--r-- 1 root root 946 2009-02-26 03:27 ./source/xap/thunar-volman/slack-desc -rw-r--r-- 1 root root 353504 2008-09-14 13:04 ./source/xap/thunar-volman/thunar-volman-0.3.80.tar.bz2 -rwxr-xr-x 1 root root 2594 2009-05-19 20:05 ./source/xap/thunar-volman/thunar-volman.SlackBuild -lrwxrwxrwx 1 root root 9 2009-08-26 16:34 ./source/xap/vim-gvim -> ../ap/vim -drwxr-xr-x 2 root root 4096 2009-05-23 02:30 ./source/xap/windowmaker +lrwxrwxrwx 1 root root 9 2009-08-23 23:36 ./source/xap/vim-gvim -> ../ap/vim +drwxr-xr-x 2 root root 4096 2010-02-11 21:40 ./source/xap/windowmaker -rw-r--r-- 1 root root 2078830 2008-07-30 06:57 ./source/xap/windowmaker/WindowMaker-20060427cvs.tar.bz2 -rw-r--r-- 1 root root 238018 1999-04-01 14:30 ./source/xap/windowmaker/WindowMaker-extra-0.1.tar.gz -rw-r--r-- 1 root root 917 2004-10-28 06:46 ./source/xap/windowmaker/slack-desc --rwxr-xr-x 1 root root 3964 2009-06-09 20:05 ./source/xap/windowmaker/windowmaker.SlackBuild +-rwxr-xr-x 1 root root 4664 2010-02-11 21:40 ./source/xap/windowmaker/windowmaker.SlackBuild -rw-r--r-- 1 root root 390 2008-07-30 05:51 ./source/xap/windowmaker/windowmaker.no-mmx.diff.gz +-rw-r--r-- 1 root root 214 2010-02-11 21:40 ./source/xap/windowmaker/windowmaker.png.1.4.0.diff.gz -rw-r--r-- 1 root root 669 2002-05-30 20:16 ./source/xap/windowmaker/wmaker.inst.diff.gz --rw-r--r-- 1 root root 788 2002-05-30 20:01 ./source/xap/windowmaker/xinitrc.wmaker +-rw-r--r-- 1 root root 394 2009-12-01 07:35 ./source/xap/windowmaker/xinitrc.wmaker.gz drwxr-xr-x 2 root root 4096 2009-08-18 22:26 ./source/xap/x11-ssh-askpass -rw-r--r-- 1 root root 533 2009-07-11 03:15 ./source/xap/x11-ssh-askpass/README -rw-r--r-- 1 root root 765 2009-01-17 08:31 ./source/xap/x11-ssh-askpass/slack-desc @@ -8829,49 +9135,55 @@ drwxr-xr-x 2 root root 4096 2009-04-10 14:28 ./source/xap/xchat/patches -rw-r--r-- 1 root root 848 2009-04-10 14:24 ./source/xap/xchat/patches/xchat.gtk_2_14.diff.gz -rw-r--r-- 1 root root 620 2008-02-11 03:44 ./source/xap/xchat/slack-desc -rw-r--r-- 1 root root 1423645 2008-06-12 08:47 ./source/xap/xchat/xchat-2.8.6.tar.bz2 --rwxr-xr-x 1 root root 3268 2009-06-09 19:33 ./source/xap/xchat/xchat.SlackBuild -drwxr-xr-x 5 root root 4096 2009-07-31 06:11 ./source/xap/xfce +-rwxr-xr-x 1 root root 3584 2010-03-02 17:49 ./source/xap/xchat/xchat.SlackBuild +drwxr-xr-x 5 root root 4096 2010-02-12 20:38 ./source/xap/xfce -rw-r--r-- 1 root root 26680 2009-07-31 06:10 ./source/xap/xfce/icons.tar.xz -drwxr-xr-x 2 root root 4096 2009-07-31 06:05 ./source/xap/xfce/patches --rw-r--r-- 1 root root 861 2009-07-19 22:36 ./source/xap/xfce/patches/exo_quoting_fix.diff.gz --rw-r--r-- 1 root root 746 2009-03-14 23:51 ./source/xap/xfce/patches/launcher-plugin-migrate-icon-cat.diff.gz --rw-r--r-- 1 root root 1014 2009-03-06 01:25 ./source/xap/xfce/patches/migrate-itheme-smartly.diff.gz --rw-r--r-- 1 root root 898 2009-07-20 18:51 ./source/xap/xfce/patches/terminal-0.4.0-fixup_docdir.diff.gz +drwxr-xr-x 2 root root 4096 2010-05-17 03:28 ./source/xap/xfce/patches +-rw-r--r-- 1 root root 1446 2010-05-17 03:26 ./source/xap/xfce/patches/terminal.gtk.2.18.fix.diff.gz -rw-r--r-- 1 root root 1559 2009-07-21 00:37 ./source/xap/xfce/patches/thunar-1.0.1-fixup_docdir.diff.gz +-rw-r--r-- 1 root root 247 2010-02-12 19:25 ./source/xap/xfce/patches/thunar-1.0.1-png14.diff.gz +-rw-r--r-- 1 root root 1137 2009-10-25 23:19 ./source/xap/xfce/patches/thunar-fix_umask_properly.diff.gz -rw-r--r-- 1 root root 233 2009-03-01 16:14 ./source/xap/xfce/patches/xfcalendar.desktop.in.diff.gz +-rw-r--r-- 1 root root 200 2010-05-06 08:06 ./source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff.gz +-rw-r--r-- 1 root root 277 2010-02-12 08:11 ./source/xap/xfce/patches/xfce4-settings.libxklavier5.diff.gz -rw-r--r-- 1 root root 289 2009-07-31 06:04 ./source/xap/xfce/patches/xfdesktop-fix_education_icon.diff.gz drwxr-xr-x 2 root root 4096 2007-04-21 19:12 ./source/xap/xfce/profile.d -rwxr-xr-x 1 root root 162 2007-06-29 01:03 ./source/xap/xfce/profile.d/xfce.csh -rwxr-xr-x 1 root root 170 2007-04-21 19:14 ./source/xap/xfce/profile.d/xfce.sh -rw-r--r-- 1 root root 764 2008-04-06 20:19 ./source/xap/xfce/slack-desc -drwxr-xr-x 2 root root 4096 2009-07-20 19:45 ./source/xap/xfce/src --rw-r--r-- 1 root root 1368876 2009-07-20 18:15 ./source/xap/xfce/src/Terminal-0.4.0.tar.xz +drwxr-xr-x 2 root root 4096 2010-02-12 19:25 ./source/xap/xfce/src +-rw-r--r-- 1 root root 1304068 2010-02-01 17:12 ./source/xap/xfce/src/Terminal-0.4.4.tar.xz -rw-r--r-- 1 root root 3473596 2009-04-19 07:55 ./source/xap/xfce/src/Thunar-1.0.1.tar.xz --rw-r--r-- 1 root root 1163740 2009-04-19 07:55 ./source/xap/xfce/src/exo-0.3.101.tar.xz +-rw-r--r-- 1 root root 1214872 2009-12-12 12:23 ./source/xap/xfce/src/exo-0.3.106.tar.xz -rw-r--r-- 1 root root 228668 2009-02-26 01:41 ./source/xap/xfce/src/gtk-xfce-engine-2.6.0.tar.xz -rw-r--r-- 1 root root 331932 2009-04-19 07:55 ./source/xap/xfce/src/libxfce4menu-4.6.1.tar.xz -rw-r--r-- 1 root root 332712 2009-04-19 07:55 ./source/xap/xfce/src/libxfce4util-4.6.1.tar.xz --rw-r--r-- 1 root root 551248 2009-04-19 07:55 ./source/xap/xfce/src/libxfcegui4-4.6.1.tar.xz +-rw-r--r-- 1 root root 569016 2010-01-20 09:25 ./source/xap/xfce/src/libxfcegui4-4.6.3.tar.xz -rw-r--r-- 1 root root 269176 2009-02-26 18:56 ./source/xap/xfce/src/mousepad-0.2.16.tar.xz -rw-r--r-- 1 root root 1698784 2009-04-19 07:55 ./source/xap/xfce/src/orage-4.6.1.tar.xz -rw-r--r-- 1 root root 501132 2009-04-19 07:55 ./source/xap/xfce/src/xfce-utils-4.6.1.tar.xz -rw-r--r-- 1 root root 259900 2009-04-19 07:55 ./source/xap/xfce/src/xfce4-appfinder-4.6.1.tar.xz --rw-r--r-- 1 root root 58600 2009-02-26 01:41 ./source/xap/xfce/src/xfce4-dev-tools-4.6.0.tar.xz +-rw-r--r-- 1 root root 65064 2009-09-20 19:43 ./source/xap/xfce/src/xfce4-dev-tools-4.7.2.tar.xz -rw-r--r-- 1 root root 334516 2009-04-19 07:55 ./source/xap/xfce/src/xfce4-mixer-4.6.1.tar.xz --rw-r--r-- 1 root root 746908 2009-04-19 07:55 ./source/xap/xfce/src/xfce4-panel-4.6.1.tar.xz +-rw-r--r-- 1 root root 786920 2009-12-30 12:04 ./source/xap/xfce/src/xfce4-panel-4.6.3.tar.xz -rw-r--r-- 1 root root 1201756 2009-04-19 07:55 ./source/xap/xfce/src/xfce4-session-4.6.1.tar.xz --rw-r--r-- 1 root root 416284 2009-04-19 07:55 ./source/xap/xfce/src/xfce4-settings-4.6.1.tar.xz +-rw-r--r-- 1 root root 454000 2010-01-02 13:39 ./source/xap/xfce/src/xfce4-settings-4.6.4.tar.xz -rw-r--r-- 1 root root 354500 2009-04-19 07:55 ./source/xap/xfce/src/xfconf-4.6.1.tar.xz -rw-r--r-- 1 root root 3136772 2009-04-19 07:55 ./source/xap/xfce/src/xfdesktop-4.6.1.tar.xz -rw-r--r-- 1 root root 728660 2009-04-19 07:55 ./source/xap/xfce/src/xfprint-4.6.1.tar.xz -rw-r--r-- 1 root root 1543832 2009-04-19 07:55 ./source/xap/xfce/src/xfwm4-4.6.1.tar.xz -rw-r--r-- 1 root root 372732 2009-02-26 01:41 ./source/xap/xfce/src/xfwm4-themes-4.6.0.tar.xz --rwxr-xr-x 1 root root 7204 2009-07-31 06:41 ./source/xap/xfce/xfce.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-15 13:16 ./source/xap/xfce4-power-manager --rw-r--r-- 1 root root 172 2009-02-08 07:12 ./source/xap/xfce4-power-manager/doinst.sh.gz --rw-r--r-- 1 root root 936 2009-03-06 23:51 ./source/xap/xfce4-power-manager/slack-desc --rw-r--r-- 1 root root 419675 2009-05-15 12:58 ./source/xap/xfce4-power-manager/xfce4-power-manager-0.6.6.tar.bz2 --rwxr-xr-x 1 root root 2888 2009-06-12 20:54 ./source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild +-rwxr-xr-x 1 root root 8618 2010-05-17 03:45 ./source/xap/xfce/xfce.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-20 18:14 ./source/xap/xfce4-notifyd +-rw-r--r-- 1 root root 174 2009-02-26 05:47 ./source/xap/xfce4-notifyd/doinst.sh.gz +-rw-r--r-- 1 root root 905 2010-02-20 18:14 ./source/xap/xfce4-notifyd/slack-desc +-rw-r--r-- 1 root root 165593 2008-11-25 06:16 ./source/xap/xfce4-notifyd/xfce4-notifyd-0.1.0.tar.bz2 +-rwxr-xr-x 1 root root 3234 2010-02-20 18:15 ./source/xap/xfce4-notifyd/xfce4-notifyd.SlackBuild +drwxr-xr-x 2 root root 4096 2010-03-02 18:09 ./source/xap/xfce4-power-manager +-rw-r--r-- 1 root root 172 2009-05-30 01:47 ./source/xap/xfce4-power-manager/doinst.sh.gz +-rw-r--r-- 1 root root 936 2009-05-30 01:47 ./source/xap/xfce4-power-manager/slack-desc +-rw-r--r-- 1 root root 920729 2010-03-02 17:24 ./source/xap/xfce4-power-manager/xfce4-power-manager-0.8.5.tar.bz2 +-rwxr-xr-x 1 root root 3674 2010-03-02 18:10 ./source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/xfractint -rw-r--r-- 1 root root 103531 2002-03-14 20:57 ./source/xap/xfractint/palette.maps.tar.gz -rw-r--r-- 1 root root 871 2002-03-14 20:25 ./source/xap/xfractint/slack-desc @@ -8895,14 +9207,16 @@ drwxr-xr-x 2 root root 4096 2009-08-22 21:20 ./source/xap/xgames -rw-r--r-- 1 root root 22849 1999-08-04 19:05 ./source/xap/xgames/xneko.tar.gz -rw-r--r-- 1 root root 21694 1993-12-02 07:19 ./source/xap/xgames/xroach.tar.gz -rw-r--r-- 1 root root 37809 1995-12-01 02:04 ./source/xap/xgames/xsnow-1.40.tar.gz -drwxr-xr-x 2 root root 4096 2009-04-06 21:09 ./source/xap/xine-lib +drwxr-xr-x 2 root root 4096 2010-02-26 20:33 ./source/xap/xine-lib -rw-r--r-- 1 root root 927 2003-08-12 00:43 ./source/xap/xine-lib/slack-desc --rw-r--r-- 1 root root 7468182 2009-04-03 16:02 ./source/xap/xine-lib/xine-lib-1.1.16.3.tar.bz2 --rwxr-xr-x 1 root root 3060 2009-06-14 03:43 ./source/xap/xine-lib/xine-lib.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-23 00:42 ./source/xap/xine-ui +-rw-r--r-- 1 root root 8082 2010-02-18 22:57 ./source/xap/xine-lib/xine-lib-1.1.17.ff.diff.gz +-rw-r--r-- 1 root root 7528937 2009-12-02 14:51 ./source/xap/xine-lib/xine-lib-1.1.17.tar.bz2 +-rwxr-xr-x 1 root root 3478 2010-02-23 00:07 ./source/xap/xine-lib/xine-lib.SlackBuild +drwxr-xr-x 2 root root 4096 2010-02-19 19:42 ./source/xap/xine-ui -rw-r--r-- 1 root root 832 2003-08-12 01:07 ./source/xap/xine-ui/slack-desc -rw-r--r-- 1 root root 2138011 2007-05-03 22:47 ./source/xap/xine-ui/xine-ui-0.99.5.tar.bz2 --rwxr-xr-x 1 root root 2723 2009-05-23 00:42 ./source/xap/xine-ui/xine-ui.SlackBuild +-rwxr-xr-x 1 root root 3139 2010-02-25 20:12 ./source/xap/xine-ui/xine-ui.SlackBuild +-rw-r--r-- 1 root root 269 2010-02-19 19:42 ./source/xap/xine-ui/xine-ui.png14.diff.gz -rw-r--r-- 1 root root 258 2007-05-04 22:27 ./source/xap/xine-ui/xine.desktop.gz drwxr-xr-x 2 root root 4096 2009-08-08 00:54 ./source/xap/xlockmore -rw-r--r-- 1 root root 225 2002-02-23 22:23 ./source/xap/xlockmore/l-bob.README @@ -8914,94 +9228,99 @@ drwxr-xr-x 2 root root 4096 2009-08-08 00:54 ./source/xap/xlockmore -rw-r--r-- 1 root root 194 2009-04-13 23:37 ./source/xap/xlockmore/xlockmore-5.28.tar.bz2.asc -rwxr-xr-x 1 root root 3449 2009-08-08 01:09 ./source/xap/xlockmore/xlockmore.SlackBuild -rw-r--r-- 1 root root 371 2002-05-30 04:25 ./source/xap/xlockmore/xlockmore.bitmap.diff.gz -drwxr-xr-x 2 root root 4096 2009-06-09 20:20 ./source/xap/xmms --rw-r--r-- 1 root root 236839 2004-03-02 22:28 ./source/xap/xmms/arts_output-0.7.1.tar.gz +drwxr-xr-x 2 root root 4096 2010-03-22 19:03 ./source/xap/xmms -rw-r--r-- 1 root root 834 2004-02-24 02:30 ./source/xap/xmms/slack-desc -rw-r--r-- 1 root root 2581032 2007-11-16 22:53 ./source/xap/xmms/xmms-1.2.11.tar.bz2 --rwxr-xr-x 1 root root 2938 2009-06-09 20:21 ./source/xap/xmms/xmms.SlackBuild +-rwxr-xr-x 1 root root 3385 2010-03-22 19:05 ./source/xap/xmms/xmms.SlackBuild -rw-r--r-- 1 root root 525 2008-09-11 20:50 ./source/xap/xmms/xmms.desktop -rw-r--r-- 1 root root 279 2008-09-12 20:50 ./source/xap/xmms/xmms.gtk.doublesize.diff.gz +-rw-r--r-- 1 root root 2475 2008-01-04 23:53 ./source/xap/xmms/xmms.png -rw-r--r-- 1 root root 260 2009-06-09 20:19 ./source/xap/xmms/xmms.wmxmms_vis_depth_workaround.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/xpaint +drwxr-xr-x 2 root root 4096 2010-02-20 01:05 ./source/xap/xpaint -rw-r--r-- 1 root root 902 2002-03-12 23:40 ./source/xap/xpaint/slack-desc --rw-r--r-- 1 root root 459429 2005-09-09 20:02 ./source/xap/xpaint/xpaint-2.7.8.1.tar.bz2 --rwxr-xr-x 1 root root 3529 2009-05-19 20:05 ./source/xap/xpaint/xpaint.SlackBuild --rw-r--r-- 1 root root 702 2007-05-10 21:48 ./source/xap/xpaint/xpaint_2.7.8.1-1.2.diff.gz --rw-r--r-- 1 root root 314 2008-11-06 21:49 ./source/xap/xpaint/xpaint_xaw3d_no_scroll_mode.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/xpdf --rw-r--r-- 1 root root 532 2007-08-08 19:25 ./source/xap/xpdf/VendorP.h.buggy.diff +-rw-r--r-- 1 root root 795772 2010-02-12 19:48 ./source/xap/xpaint/xpaint-2.8.16.tar.bz2 +-rwxr-xr-x 1 root root 4009 2010-02-20 01:05 ./source/xap/xpaint/xpaint.SlackBuild +drwxr-xr-x 4 root root 4096 2010-02-11 21:58 ./source/xap/xpdf +-rw-r--r-- 1 root root 325 2010-01-11 04:59 ./source/xap/xpdf/doinst.sh.gz +drwxr-xr-x 2 root root 4096 2010-01-11 05:01 ./source/xap/xpdf/lang +-rw-r--r-- 1 root root 207 2008-03-02 07:24 ./source/xap/xpdf/lang/xpdf-arabic.diff.gz +-rw-r--r-- 1 root root 1058 2004-07-18 23:14 ./source/xap/xpdf/lang/xpdf-arabic.tar.gz +-rw-r--r-- 1 root root 375 2008-03-02 07:46 ./source/xap/xpdf/lang/xpdf-chinese-simplified.diff.gz +-rw-r--r-- 1 root root 835960 2004-07-27 22:29 ./source/xap/xpdf/lang/xpdf-chinese-simplified.tar.gz +-rw-r--r-- 1 root root 354 2008-03-02 07:45 ./source/xap/xpdf/lang/xpdf-chinese-traditional.diff.gz +-rw-r--r-- 1 root root 794604 2004-07-27 22:30 ./source/xap/xpdf/lang/xpdf-chinese-traditional.tar.gz +-rw-r--r-- 1 root root 242 2008-03-02 07:27 ./source/xap/xpdf/lang/xpdf-cyrillic.diff.gz +-rw-r--r-- 1 root root 1660 2004-07-18 23:15 ./source/xap/xpdf/lang/xpdf-cyrillic.tar.gz +-rw-r--r-- 1 root root 236 2008-03-02 07:28 ./source/xap/xpdf/lang/xpdf-greek.diff.gz +-rw-r--r-- 1 root root 1263 2004-07-18 23:15 ./source/xap/xpdf/lang/xpdf-greek.tar.gz +-rw-r--r-- 1 root root 224 2008-03-02 07:28 ./source/xap/xpdf/lang/xpdf-hebrew.diff.gz +-rw-r--r-- 1 root root 1314 2004-07-18 23:15 ./source/xap/xpdf/lang/xpdf-hebrew.tar.gz +-rw-r--r-- 1 root root 750 2008-03-02 07:48 ./source/xap/xpdf/lang/xpdf-japanese.diff.gz +-rw-r--r-- 1 root root 494803 2004-07-27 22:30 ./source/xap/xpdf/lang/xpdf-japanese.tar.gz +-rw-r--r-- 1 root root 312 2008-03-02 07:34 ./source/xap/xpdf/lang/xpdf-korean.diff.gz +-rw-r--r-- 1 root root 470455 2005-07-07 18:05 ./source/xap/xpdf/lang/xpdf-korean.tar.gz +-rw-r--r-- 1 root root 200 2008-03-02 07:36 ./source/xap/xpdf/lang/xpdf-latin2.diff.gz +-rw-r--r-- 1 root root 1435 2004-07-18 23:15 ./source/xap/xpdf/lang/xpdf-latin2.tar.gz +-rw-r--r-- 1 root root 231 2008-03-02 07:36 ./source/xap/xpdf/lang/xpdf-thai.diff.gz +-rw-r--r-- 1 root root 1873 2004-07-18 23:17 ./source/xap/xpdf/lang/xpdf-thai.tar.gz +-rw-r--r-- 1 root root 210 2008-03-02 07:37 ./source/xap/xpdf/lang/xpdf-turkish.diff.gz +-rw-r--r-- 1 root root 1140 2004-07-18 23:17 ./source/xap/xpdf/lang/xpdf-turkish.tar.gz +drwxr-xr-x 2 root root 4096 2010-01-11 04:55 ./source/xap/xpdf/patches +-rw-r--r-- 1 root root 1050 2007-07-30 18:51 ./source/xap/xpdf/patches/xpdf-3.02pl1.patch +-rw-r--r-- 1 root root 189 2007-07-30 18:51 ./source/xap/xpdf/patches/xpdf-3.02pl1.patch.sig +-rw-r--r-- 1 root root 20843 2007-11-07 18:16 ./source/xap/xpdf/patches/xpdf-3.02pl2.patch +-rw-r--r-- 1 root root 189 2007-11-07 18:16 ./source/xap/xpdf/patches/xpdf-3.02pl2.patch.sig +-rw-r--r-- 1 root root 30727 2009-04-16 19:18 ./source/xap/xpdf/patches/xpdf-3.02pl3.patch +-rw-r--r-- 1 root root 197 2009-04-16 19:18 ./source/xap/xpdf/patches/xpdf-3.02pl3.patch.sig +-rw-r--r-- 1 root root 6982 2009-10-14 22:12 ./source/xap/xpdf/patches/xpdf-3.02pl4.patch +-rw-r--r-- 1 root root 197 2009-10-14 22:12 ./source/xap/xpdf/patches/xpdf-3.02pl4.patch.sig +-rw-r--r-- 1 root root 498 2007-04-12 00:58 ./source/xap/xpdf/patches/xpdf-resizefix.diff.gz +-rw-r--r-- 1 root root 37396 2007-11-12 05:27 ./source/xap/xpdf/patches/xpdf_3.02-1.3.diff.gz +-rw-r--r-- 1 root root 636 2007-02-18 03:26 ./source/xap/xpdf/patches/xpdfrc.diff.gz -rw-r--r-- 1 root root 711 2007-04-12 01:49 ./source/xap/xpdf/slack-desc -rw-r--r-- 1 root root 674912 2007-02-27 22:56 ./source/xap/xpdf/xpdf-3.02.tar.gz -rw-r--r-- 1 root root 189 2007-02-27 22:50 ./source/xap/xpdf/xpdf-3.02.tar.gz.sig --rw-r--r-- 1 root root 1050 2007-07-30 18:51 ./source/xap/xpdf/xpdf-3.02pl1.patch --rw-r--r-- 1 root root 189 2007-07-30 18:51 ./source/xap/xpdf/xpdf-3.02pl1.patch.sig --rw-r--r-- 1 root root 20843 2007-11-07 18:16 ./source/xap/xpdf/xpdf-3.02pl2.patch --rw-r--r-- 1 root root 189 2007-11-07 18:16 ./source/xap/xpdf/xpdf-3.02pl2.patch.sig --rw-r--r-- 1 root root 30727 2009-04-16 19:18 ./source/xap/xpdf/xpdf-3.02pl3.patch --rw-r--r-- 1 root root 197 2009-04-16 19:18 ./source/xap/xpdf/xpdf-3.02pl3.patch.sig --rw-r--r-- 1 root root 207 2008-03-02 07:24 ./source/xap/xpdf/xpdf-arabic.diff.gz --rw-r--r-- 1 root root 1058 2004-07-18 23:14 ./source/xap/xpdf/xpdf-arabic.tar.gz --rw-r--r-- 1 root root 375 2008-03-02 07:46 ./source/xap/xpdf/xpdf-chinese-simplified.diff.gz --rw-r--r-- 1 root root 835960 2004-07-27 22:29 ./source/xap/xpdf/xpdf-chinese-simplified.tar.gz --rw-r--r-- 1 root root 354 2008-03-02 07:45 ./source/xap/xpdf/xpdf-chinese-traditional.diff.gz --rw-r--r-- 1 root root 794604 2004-07-27 22:30 ./source/xap/xpdf/xpdf-chinese-traditional.tar.gz --rw-r--r-- 1 root root 242 2008-03-02 07:27 ./source/xap/xpdf/xpdf-cyrillic.diff.gz --rw-r--r-- 1 root root 1660 2004-07-18 23:15 ./source/xap/xpdf/xpdf-cyrillic.tar.gz --rw-r--r-- 1 root root 236 2008-03-02 07:28 ./source/xap/xpdf/xpdf-greek.diff.gz --rw-r--r-- 1 root root 1263 2004-07-18 23:15 ./source/xap/xpdf/xpdf-greek.tar.gz --rw-r--r-- 1 root root 224 2008-03-02 07:28 ./source/xap/xpdf/xpdf-hebrew.diff.gz --rw-r--r-- 1 root root 1314 2004-07-18 23:15 ./source/xap/xpdf/xpdf-hebrew.tar.gz --rw-r--r-- 1 root root 750 2008-03-02 07:48 ./source/xap/xpdf/xpdf-japanese.diff.gz --rw-r--r-- 1 root root 494803 2004-07-27 22:30 ./source/xap/xpdf/xpdf-japanese.tar.gz --rw-r--r-- 1 root root 312 2008-03-02 07:34 ./source/xap/xpdf/xpdf-korean.diff.gz --rw-r--r-- 1 root root 470455 2005-07-07 18:05 ./source/xap/xpdf/xpdf-korean.tar.gz --rw-r--r-- 1 root root 200 2008-03-02 07:36 ./source/xap/xpdf/xpdf-latin2.diff.gz --rw-r--r-- 1 root root 1435 2004-07-18 23:15 ./source/xap/xpdf/xpdf-latin2.tar.gz --rw-r--r-- 1 root root 498 2007-04-12 00:58 ./source/xap/xpdf/xpdf-resizefix.diff.gz --rw-r--r-- 1 root root 231 2008-03-02 07:36 ./source/xap/xpdf/xpdf-thai.diff.gz --rw-r--r-- 1 root root 1873 2004-07-18 23:17 ./source/xap/xpdf/xpdf-thai.tar.gz --rw-r--r-- 1 root root 210 2008-03-02 07:37 ./source/xap/xpdf/xpdf-turkish.diff.gz --rw-r--r-- 1 root root 1140 2004-07-18 23:17 ./source/xap/xpdf/xpdf-turkish.tar.gz --rwxr-xr-x 1 root root 4735 2009-05-19 20:05 ./source/xap/xpdf/xpdf.SlackBuild --rw-r--r-- 1 root root 3290 2008-03-18 02:37 ./source/xap/xpdf/xpdf.desktop --rw-r--r-- 1 root root 37396 2007-11-12 05:27 ./source/xap/xpdf/xpdf_3.02-1.3.diff.gz --rw-r--r-- 1 root root 636 2007-02-18 03:26 ./source/xap/xpdf/xpdfrc.diff.gz +-rwxr-xr-x 1 root root 5157 2010-02-11 22:00 ./source/xap/xpdf/xpdf.SlackBuild +-rw-r--r-- 1 root root 3260 2010-01-11 05:07 ./source/xap/xpdf/xpdf.desktop drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/xsane -rw-r--r-- 1 root root 955 2004-05-11 19:29 ./source/xap/xsane/slack-desc -rw-r--r-- 1 root root 2531642 2008-09-21 18:31 ./source/xap/xsane/xsane-0.996.tar.bz2 --rwxr-xr-x 1 root root 2842 2009-05-19 20:05 ./source/xap/xsane/xsane.SlackBuild -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/xscreensaver +-rwxr-xr-x 1 root root 3134 2010-02-20 00:47 ./source/xap/xsane/xsane.SlackBuild +drwxr-xr-x 2 root root 4096 2010-05-03 07:21 ./source/xap/xscreensaver -rw-r--r-- 1 root root 2868 2008-10-17 04:30 ./source/xap/xscreensaver/setuid.c.gz -rw-r--r-- 1 root root 887 2008-10-17 04:31 ./source/xap/xscreensaver/slack-desc --rw-r--r-- 1 root root 3310808 2008-12-28 07:59 ./source/xap/xscreensaver/xscreensaver-5.08.tar.xz --rwxr-xr-x 1 root root 3186 2009-05-19 20:05 ./source/xap/xscreensaver/xscreensaver.SlackBuild +-rw-r--r-- 1 root root 3327596 2010-04-13 20:37 ./source/xap/xscreensaver/xscreensaver-5.11.tar.xz +-rwxr-xr-x 1 root root 3585 2010-02-20 19:40 ./source/xap/xscreensaver/xscreensaver.SlackBuild -rw-r--r-- 1 root root 285 2009-05-15 21:22 ./source/xap/xscreensaver/xscreensaver.electricsheep.diff.gz -rw-r--r-- 1 root root 1763 2008-10-17 04:32 ./source/xap/xscreensaver/xscreensaver.setuid.diff.gz -drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/xv +drwxr-xr-x 2 root root 4096 2010-02-19 19:32 ./source/xap/xv -rw-r--r-- 1 root root 688 2002-03-10 06:26 ./source/xap/xv/slack-desc --rw-r--r-- 1 root root 2271704 1994-12-22 15:50 ./source/xap/xv/xv-3.10.tar.gz --rw-r--r-- 1 root root 20873 2005-05-01 20:45 ./source/xap/xv/xv-3.10a-jumbo-README.txt --rw-r--r-- 1 root root 172642 2005-05-01 20:51 ./source/xap/xv/xv-3.10a-jumbo-enh-patch-20050501.txt.bz2 --rw-r--r-- 1 root root 197713 2005-04-11 03:01 ./source/xap/xv/xv-3.10a-jumbo-fix-patch-20050410.txt.bz2 +-rw-r--r-- 1 root root 1693808 1994-12-22 15:50 ./source/xap/xv/xv-3.10.tar.xz +-rw-r--r-- 1 root root 3294 2008-12-16 18:04 ./source/xap/xv/xv-3.10a-enhancements.20070520-20081216.diff.bz2 +-rw-r--r-- 1 root root 25974 2007-05-21 05:19 ./source/xap/xv/xv-3.10a-jumbo-README.txt +-rw-r--r-- 1 root root 114978 2010-02-19 19:24 ./source/xap/xv/xv-3.10a-jumbo-additions.diff.bz2 +-rw-r--r-- 1 root root 287250 2007-05-21 04:57 ./source/xap/xv/xv-3.10a-jumbo-fix-enh-patch-20070520.txt.bz2 -rw-r--r-- 1 root root 21943 1996-10-05 19:33 ./source/xap/xv/xv-3.10a.patch.gz --rwxr-xr-x 1 root root 2734 2009-05-19 20:05 ./source/xap/xv/xv.SlackBuild --rw-r--r-- 1 root root 200 2005-07-12 22:17 ./source/xap/xv/xv.prefix.diff.gz --rw-r--r-- 1 root root 321 2008-11-06 22:29 ./source/xap/xv/xv.prefix_x86_64.diff.gz +-rwxr-xr-x 1 root root 3210 2010-02-19 19:32 ./source/xap/xv/xv.SlackBuild +-rw-r--r-- 1 root root 229 2010-02-19 19:27 ./source/xap/xv/xv.jasper.diff.gz +-rw-r--r-- 1 root root 317 2010-02-19 19:15 ./source/xap/xv/xv.prefix.diff.gz +-rw-r--r-- 1 root root 282 2010-02-19 19:16 ./source/xap/xv/xv.prefix_x86_64.diff.gz drwxr-xr-x 2 root root 4096 2009-05-19 20:05 ./source/xap/xxgdb -rw-r--r-- 1 root root 874 2002-03-13 02:25 ./source/xap/xxgdb/slack-desc -rw-r--r-- 1 root root 115537 1995-11-19 16:40 ./source/xap/xxgdb/xxgdb-1.12.tar.gz -rwxr-xr-x 1 root root 3066 2009-05-19 20:05 ./source/xap/xxgdb/xxgdb.SlackBuild -rw-r--r-- 1 root root 607 2007-02-21 18:30 ./source/xap/xxgdb/xxgdb.fix_glibc_and_gcc.diff.gz -drwxr-xr-x 3 root root 4096 2008-10-28 21:34 ./source/y -drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/y/bsd-games +drwxr-xr-x 3 root root 4096 2010-05-12 04:10 ./source/y +drwxr-xr-x 2 root root 4096 2010-05-11 21:10 ./source/y/bsd-games -rw-r--r-- 1 root root 825 2001-08-30 23:25 ./source/y/bsd-games/bsd-games-2.13.lsm -rw-r--r-- 1 root root 1861269 2001-08-30 23:25 ./source/y/bsd-games/bsd-games-2.13.tar.bz2 -rw-r--r-- 1 root root 164 1999-09-27 21:18 ./source/y/bsd-games/bsd-games-login-fortune.csh --rw-r--r-- 1 root root 141 2003-03-14 00:40 ./source/y/bsd-games/bsd-games-login-fortune.sh --rwxr-xr-x 1 root root 6427 2009-05-23 00:41 ./source/y/bsd-games/bsd-games.SlackBuild +-rw-r--r-- 1 root root 164 2010-05-11 19:26 ./source/y/bsd-games/bsd-games-login-fortune.sh +-rwxr-xr-x 1 root root 6785 2010-05-15 18:02 ./source/y/bsd-games/bsd-games.SlackBuild -rw-r--r-- 1 root root 563 2003-02-03 21:48 ./source/y/bsd-games/bsd-games.config.params.diff.gz -rw-r--r-- 1 root root 283 2003-02-03 22:28 ./source/y/bsd-games/bsd-games.fortlen.diff.gz -rw-r--r-- 1 root root 181 2002-03-10 05:27 ./source/y/bsd-games/bsd-games.fortunepath.diff.gz +-rw-r--r-- 1 root root 2333 2010-05-11 21:10 ./source/y/bsd-games/bsd-games.getline.diff.gz -rw-r--r-- 1 root root 265 2006-09-07 02:18 ./source/y/bsd-games/bsd-games.ospeed.diff.gz -rw-r--r-- 1 root root 386 2007-08-27 17:51 ./source/y/bsd-games/bsd-games.phantasia_install_fix.diff.gz -rw-r--r-- 1 root root 1960 2006-09-09 00:47 ./source/y/bsd-games/bsd-games.pom.diff.gz @@ -9011,93 +9330,27 @@ drwxr-xr-x 2 root root 4096 2009-05-23 00:41 ./source/y/bsd-games -rw-r--r-- 1 root root 364407 2002-03-10 05:09 ./source/y/bsd-games/fortunes-o.tar.gz -rw-r--r-- 1 root root 104848 1993-10-25 00:02 ./source/y/bsd-games/hangman-words.gz -rw-r--r-- 1 root root 1056 2002-03-10 04:51 ./source/y/bsd-games/slack-desc -drwxr-xr-x 4 root root 4096 2009-08-23 08:05 ./testing --rw-r--r-- 1 root root 6486 2009-08-23 08:05 ./testing/CHECKSUMS.md5 --rw-r--r-- 1 root root 197 2009-08-23 08:05 ./testing/CHECKSUMS.md5.asc --rw-r--r-- 1 root root 8043 2009-08-23 08:05 ./testing/FILE_LIST --rw-r--r-- 1 root root 266389 2009-08-23 08:05 ./testing/MANIFEST.bz2 --rw-r--r-- 1 root root 3805 2009-08-23 08:05 ./testing/PACKAGES.TXT -drwxr-xr-x 3 root root 4096 2009-08-25 04:31 ./testing/packages --rw-r--r-- 1 root root 510 2009-06-20 17:48 ./testing/packages/bash-4.0.024-x86_64-1.txt --rw-r--r-- 1 root root 875636 2009-06-20 17:48 ./testing/packages/bash-4.0.024-x86_64-1.txz --rw-r--r-- 1 root root 197 2009-06-20 17:48 ./testing/packages/bash-4.0.024-x86_64-1.txz.asc -drwxr-xr-x 2 root root 4096 2009-08-23 08:05 ./testing/packages/linux-2.6.30.5 --rw-r--r-- 1 root root 3420 2009-08-23 07:23 ./testing/packages/linux-2.6.30.5/README_FIRST.TXT --rw-r--r-- 1 root root 344 2009-08-23 00:55 ./testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txt --rw-r--r-- 1 root root 470352 2009-08-23 00:55 ./testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txz --rw-r--r-- 1 root root 197 2009-08-23 00:55 ./testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txz.asc --rw-r--r-- 1 root root 626 2009-08-23 00:55 ./testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txt --rw-r--r-- 1 root root 3068024 2009-08-23 00:55 ./testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txz --rw-r--r-- 1 root root 197 2009-08-23 00:55 ./testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txz.asc --rw-r--r-- 1 root root 332 2009-08-23 00:48 ./testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txt --rw-r--r-- 1 root root 525272 2009-08-23 00:48 ./testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txz --rw-r--r-- 1 root root 197 2009-08-23 00:48 ./testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txz.asc --rw-r--r-- 1 root root 520 2009-08-23 05:03 ./testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txt --rw-r--r-- 1 root root 16707836 2009-08-23 05:03 ./testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txz --rw-r--r-- 1 root root 197 2009-08-23 05:03 ./testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txz.asc --rw-r--r-- 1 root root 317 2009-08-23 00:47 ./testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txt --rw-r--r-- 1 root root 50832812 2009-08-23 00:47 ./testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txz --rw-r--r-- 1 root root 197 2009-08-23 00:47 ./testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txz.asc -drwxr-xr-x 4 root root 4096 2009-08-25 04:31 ./testing/source -drwxr-xr-x 3 root root 4096 2009-02-23 21:59 ./testing/source/bash -drwxr-xr-x 2 root root 4096 2009-06-20 17:38 ./testing/source/bash/bash-4.0-patches --rw-r--r-- 1 root root 5156 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-001 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-001.sig --rw-r--r-- 1 root root 1220 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-002 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-002.sig --rw-r--r-- 1 root root 1749 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-003 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-003.sig --rw-r--r-- 1 root root 1347 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-004 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-004.sig --rw-r--r-- 1 root root 2021 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-005 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-005.sig --rw-r--r-- 1 root root 1133 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-006 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-006.sig --rw-r--r-- 1 root root 6920 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-007 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-007.sig --rw-r--r-- 1 root root 1196 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-008 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-008.sig --rw-r--r-- 1 root root 1821 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-009 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-009.sig --rw-r--r-- 1 root root 2152 2009-03-09 15:00 ./testing/source/bash/bash-4.0-patches/bash40-010 --rw-r--r-- 1 root root 65 2009-03-09 15:01 ./testing/source/bash/bash-4.0-patches/bash40-010.sig --rw-r--r-- 1 root root 1383 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-011 --rw-r--r-- 1 root root 65 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-011.sig --rw-r--r-- 1 root root 1459 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-012 --rw-r--r-- 1 root root 65 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-012.sig --rw-r--r-- 1 root root 4629 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-013 --rw-r--r-- 1 root root 65 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-013.sig --rw-r--r-- 1 root root 3709 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-014 --rw-r--r-- 1 root root 65 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-014.sig --rw-r--r-- 1 root root 1914 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-015 --rw-r--r-- 1 root root 65 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-015.sig --rw-r--r-- 1 root root 3032 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-016 --rw-r--r-- 1 root root 65 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-016.sig --rw-r--r-- 1 root root 1496 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-017 --rw-r--r-- 1 root root 65 2009-04-06 12:35 ./testing/source/bash/bash-4.0-patches/bash40-017.sig --rw-r--r-- 1 root root 2614 2009-05-16 20:39 ./testing/source/bash/bash-4.0-patches/bash40-018 --rw-r--r-- 1 root root 65 2009-05-16 20:39 ./testing/source/bash/bash-4.0-patches/bash40-018.sig --rw-r--r-- 1 root root 3309 2009-05-16 20:40 ./testing/source/bash/bash-4.0-patches/bash40-019 --rw-r--r-- 1 root root 65 2009-05-16 20:40 ./testing/source/bash/bash-4.0-patches/bash40-019.sig --rw-r--r-- 1 root root 2666 2009-05-16 20:40 ./testing/source/bash/bash-4.0-patches/bash40-020 --rw-r--r-- 1 root root 65 2009-05-16 20:40 ./testing/source/bash/bash-4.0-patches/bash40-020.sig --rw-r--r-- 1 root root 1547 2009-05-16 20:40 ./testing/source/bash/bash-4.0-patches/bash40-021 --rw-r--r-- 1 root root 65 2009-05-16 20:40 ./testing/source/bash/bash-4.0-patches/bash40-021.sig --rw-r--r-- 1 root root 1592 2009-05-16 20:40 ./testing/source/bash/bash-4.0-patches/bash40-022 --rw-r--r-- 1 root root 65 2009-05-16 20:40 ./testing/source/bash/bash-4.0-patches/bash40-022.sig --rw-r--r-- 1 root root 2148 2009-05-16 20:41 ./testing/source/bash/bash-4.0-patches/bash40-023 --rw-r--r-- 1 root root 65 2009-05-16 20:41 ./testing/source/bash/bash-4.0-patches/bash40-023.sig --rw-r--r-- 1 root root 3049 2009-05-16 20:41 ./testing/source/bash/bash-4.0-patches/bash40-024 --rw-r--r-- 1 root root 65 2009-05-16 20:41 ./testing/source/bash/bash-4.0-patches/bash40-024.sig --rw-r--r-- 1 root root 4707018 2009-02-20 20:09 ./testing/source/bash/bash-4.0.tar.bz2 --rwxr-xr-x 1 root root 2109 2009-06-20 17:47 ./testing/source/bash/bash.SlackBuild --rw-r--r-- 1 root root 189 2009-02-23 21:59 ./testing/source/bash/doinst.sh.gz --rw-r--r-- 1 root root 965 2002-03-23 21:47 ./testing/source/bash/slack-desc -drwxr-xr-x 2 root root 4096 2009-08-23 07:44 ./testing/source/linux-2.6.30.5 --rw-r--r-- 1 root root 94034 2009-08-23 00:55 ./testing/source/linux-2.6.30.5/config-generic-2.6.30.5 -drwxr-xr-x 2 root root 4096 2009-08-25 10:30 ./usb-and-pxe-installers +drwxr-xr-x 4 root root 4096 2010-05-18 22:40 ./testing +-rw-r--r-- 1 root root 1225 2010-05-18 22:40 ./testing/CHECKSUMS.md5 +-rw-r--r-- 1 root root 198 2010-05-18 22:40 ./testing/CHECKSUMS.md5.asc +-rw-r--r-- 1 root root 1598 2010-05-18 22:40 ./testing/FILE_LIST +-rw-r--r-- 1 root root 6847 2010-05-18 22:40 ./testing/MANIFEST.bz2 +-rw-r--r-- 1 root root 1528 2010-05-18 22:40 ./testing/PACKAGES.TXT +drwxr-xr-x 2 root root 4096 2010-05-18 22:40 ./testing/packages +-rw-r--r-- 1 root root 322 2010-05-04 07:08 ./testing/packages/amarok-2.3.0.90-x86_64-1.txt +-rw-r--r-- 1 root root 7804796 2010-05-04 07:08 ./testing/packages/amarok-2.3.0.90-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-04 07:08 ./testing/packages/amarok-2.3.0.90-x86_64-1.txz.asc +-rw-r--r-- 1 root root 639 2010-05-18 20:16 ./testing/packages/btrfs-progs-20100518-x86_64-1.txt +-rw-r--r-- 1 root root 125876 2010-05-18 20:16 ./testing/packages/btrfs-progs-20100518-x86_64-1.txz +-rw-r--r-- 1 root root 198 2010-05-18 20:16 ./testing/packages/btrfs-progs-20100518-x86_64-1.txz.asc +drwxr-xr-x 3 root root 4096 2010-05-18 20:16 ./testing/source +drwxr-xr-x 2 root root 4096 2010-05-18 18:28 ./testing/source/btrfs-progs +-rw-r--r-- 1 root root 135696 2010-05-18 18:28 ./testing/source/btrfs-progs/btrfs-progs-20100518.tar.xz +-rwxr-xr-x 1 root root 3826 2010-01-20 07:15 ./testing/source/btrfs-progs/btrfs-progs.SlackBuild +-rw-r--r-- 1 root root 1102 2010-01-20 07:12 ./testing/source/btrfs-progs/slack-desc +drwxr-xr-x 2 root root 4096 2010-05-17 02:11 ./usb-and-pxe-installers -rw-r--r-- 1 root root 31142 2009-07-22 14:49 ./usb-and-pxe-installers/README_PXE.TXT -rw-r--r-- 1 root root 7938 2009-07-22 14:47 ./usb-and-pxe-installers/README_USB.TXT --rw-r--r-- 1 root root 345 2009-02-17 13:57 ./usb-and-pxe-installers/pxelinux.cfg_default --rw-r--r-- 1 root root 21266432 2009-08-25 10:28 ./usb-and-pxe-installers/usbboot.img --rw-r--r-- 1 root root 7908 2009-05-14 10:30 ./usb-and-pxe-installers/usbimg2disk.sh +-rw-r--r-- 1 root root 345 2010-04-13 20:56 ./usb-and-pxe-installers/pxelinux.cfg_default +-rw-r--r-- 1 root root 25169920 2010-05-17 02:10 ./usb-and-pxe-installers/usbboot.img +-rw-r--r-- 1 root root 13469 2010-04-24 18:22 ./usb-and-pxe-installers/usbimg2disk.sh diff --git a/README.TXT b/README.TXT index 74bce67a1..a6e24c6af 100644 --- a/README.TXT +++ b/README.TXT @@ -1,17 +1,17 @@ -Welcome to Slackware 13.0! (64-bit x86_64 edition)
+Welcome to Slackware 13.1! (64-bit x86_64 edition)
-Slackware 13.0 is a complete distribution of the Linux operating system.
+Slackware 13.1 is a complete distribution of the Linux operating system.
-Here are some versions of major components of Slackware 13.0:
+Here are some versions of major components of Slackware 13.1:
-- Linux kernel 2.6.29.6
-- C compiler gcc-4.3.3
-- Binutils 2.18.50.0.9
-- GNU C Library glibc-2.9
+- Linux kernel 2.6.33.4
+- C compiler gcc-4.4.4
+- Binutils 2.20.51.0.8
+- GNU C Library glibc-2.11.1
- X Window System Updated (but not "bleeding edge") packages
from X.Org
-- KDE 4.2.4
+- KDE 4.4.3
- Xfce 4.6.1
For installation instructions, see the file 'Slackware-HOWTO'.
@@ -21,11 +21,11 @@ For important hints about this release, see the file 'CHANGES_AND_HINTS.TXT'. These are some of the important files and directories found on the Slackware
FTP site:
- ftp://ftp.slackware.com/pub/slackware/slackware-13.0/
+ ftp://ftp.slackware.com/pub/slackware/slackware64-13.1/
There is also a newer (and faster) primary FTP site for Slackware here:
- ftp://slackware.osuosl.org/pub/slackware/slackware-13.0/
+ ftp://slackware.osuosl.org/pub/slackware/slackware64-13.1/
Thanks to cwo.com for continuing to help us with hosting for our web site
and ftp.slackware.com, and to the OSU Open Source Lab for hosting our
@@ -35,13 +35,10 @@ If you're reading this on a CD-ROM, these directories will probably be split across several discs.
.
-|-- ANNOUNCE.13_0 Announcement for Slackware 13.0.
+|-- ANNOUNCE.13.1 Announcement for Slackware 13.1.
|-- BOOTING.TXT Tips for troubleshooting boot problems.
-|-- CHANGES_AND_HINTS.TXT A summary of major changes from Slackware 12.2
-| to 13.0 and common pitfalls. Slackware 13.0
-| x86_64 (Slackware64) is the first release to the
-| 64-bit x86_64 architecture, but the information
-| contained in this file is still useful.
+|-- CHANGES_AND_HINTS.TXT A summary of major changes from Slackware 13.0
+| to 13.1 and common pitfalls.
|-- CHECKSUMS.md5 MD5 format file checksums.
|-- COPYING The GNU Public License, version 2.
|-- COPYING3 The GNU Public License, version 3.
@@ -66,13 +63,11 @@ split across several discs. | If you're new to Slackware, start with this.
|
|-- extra/ Extra packages for Slackware like:
-| | aspell-word-lists, bash-completion, bittorrent,
-| | brltty, the Java(TM) JDK, kde3-compat, mpg123,
+| | aspell-word-lists, bash-completion, bittornado,
+| | brltty, emacspeak, the Java(TM) JDK, kde3-compat,
| | mplayerplug-in, partitionmanager (GUI partitioning
-| | tool for KDE4), slacktrack, tightvnc, wicd and
-| | xf86-video-intel-alternate (alternate video drivers
-| | that may help cure instabilities on some Intel
-| | chipsets), yasm assembler.
+| | tool for KDE4), slacktrack, tightvnc, wicd,
+| | yasm assembler.
| |
| `-- source/ Source code for the extra packages.
|
@@ -86,11 +81,11 @@ split across several discs. | |
| `-- initrd.img Installation initrd (can also be loaded with Loadlin)
|
-|-- kernels/ Precompiled Linux 2.6.29.6 kernel images.
+|-- kernels/ Precompiled Linux 2.6.33.4 kernel images.
| |
| |-- huge.s The default standard install kernel for Slackware.
| | This supports pretty much everything in the
-| | 2.6.29.6 kernel. This kernel requires an x86_64
+| | 2.6.33.4 kernel. This kernel requires an x86_64
| | (also known as AMD64, EM64T, or Intel 64) capable
| | 64-bit CPU.
| |
@@ -106,7 +101,7 @@ split across several discs. | This directory is also currently empty.
|
|-- slackware/ This directory contains the core software packages
-| | for Slackware 13.0.
+| | for Slackware 13.1.
| |
| |-- a/ The A (base) package series.
| |-- ap/ The AP (applications) package series.
@@ -146,14 +141,9 @@ split across several discs. |
|-- testing/ This directory contains packages being tested
| | for possible use in future versions of Slackware.
-| | You'll find bash-4.0 and linux kernel 2.6.30.5
-| | packages here. We considered it a little early to
-| | replace the versions in the main tree but these
-| | may be useful if your hardware requires a newer
-| | kernel or you want some of the features of the
-| | next generation bash. These packages should not
-| | be considered supported or necessarily secure, but
-| | may still useful.
+| | You'll find amarok-2.3.0.90 (a development
+| | release), and btrfs-progs (2010-05-18 repo pull).
+| | These packages should not be considered supported.
| |
| `--- source/ This directory contains source code for the
| packages in testing.
@@ -168,10 +158,12 @@ split across several discs. |-- README_USB.TXT
|-- pxelinux.cfg_default
`-- usbboot.img The Slackware installer for bootable USB flash.
+ `-- usbimg2disk.sh Script to make a partitioned USB flash installer
+ from usbboot.img.
If you like Slackware, please consider supporting the project by becoming
-a Slackware subscriber. The announcement (ANNOUNCE_13.0) in this directory
+a Slackware subscriber. The announcement (ANNOUNCE_13.1) in this directory
has information about ordering or subscribing to the Slackware CD-ROM or
DVD releases. Note that at this time the x86_64 release is only available
as part of the DVD -- if there's interest in a CD-ROM version, let us know.
diff --git a/README.initrd b/README.initrd index 20ec4054b..96a2ed45f 100644 --- a/README.initrd +++ b/README.initrd @@ -1,7 +1,7 @@ Slackware initrd mini HOWTO by Patrick Volkerding, volkerdi@slackware.com -Sun Jul 12 23:23:24 CDT 2009 +Wed May 12 22:32:34 CDT 2010 This document describes how to create and install an initrd, which may be required to use the 2.6 kernel. Also see "man mkinitrd". @@ -33,16 +33,16 @@ flexible to ship a generic kernel and a set of kernel modules for it. The easiest way to make the initrd is to use the mkinitrd script included in Slackware's mkinitrd package. We'll walk through the process of -upgrading to the generic 2.6.29.6 Linux kernel using the packages +upgrading to the generic 2.6.33.4 Linux kernel using the packages found in Slackware's slackware/a/ directory. First, make sure the kernel, kernel modules, and mkinitrd package are installed (the current version numbers might be a little different, so this is just an example): - installpkg kernel-generic-2.6.29.6-i686-2.txz - installpkg kernel-modules-2.6.29.6-i686-2.txz - installpkg mkinitrd-1.3.4-i486-3.txz + installpkg kernel-generic-2.6.33.4-x86_64-1.tgz + installpkg kernel-modules-2.6.33.4-x86_64-1.tgz + installpkg mkinitrd-1.4.5-x86_64-2.txz Change into the /boot directory: @@ -52,7 +52,7 @@ Now you'll want to run "mkinitrd". I'm using reiserfs for my root filesystem, and since it's an IDE system the reiserfs module will be the only one I need to load: - mkinitrd -c -k 2.6.29.6 -m reiserfs + mkinitrd -c -k 2.6.33.4 -m reiserfs This should do two things. First, it will create a directory /boot/initrd-tree containing the initrd's filesystem. Then it will @@ -61,11 +61,10 @@ you could make some additional changes in /boot/initrd-tree/ and then run mkinitrd again without options to rebuild the image. That's optional, though, and only advanced users will need to think about that. -Here's another example: Build an initrd image using Linux 2.6.29.6 -kernel modules for a system with an ext3 root partition on /dev/hdb3. -Note that you need the mbcache, jbd, and ext3 modules to use ext3: +Here's another example: Build an initrd image using Linux 2.6.33.4 +kernel modules for a system with an ext3 root partition on /dev/sdb3: - mkinitrd -c -k 2.6.29.6 -m mbcache:jbd:ext3 -f ext3 -r /dev/hdb3 + mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r /dev/sdb3 4. Now that I've built an initrd, how do I use it? @@ -77,10 +76,10 @@ initrd. Here's an example section of lilo.conf showing how this is done: # Linux bootable partition config begins -image = /boot/vmlinuz-generic-2.6.29.6 +image = /boot/vmlinuz-generic-2.6.33.4 initrd = /boot/initrd.gz - root = /dev/hda6 - label = Lnx26296 + root = /dev/sda6 + label = Lnx26334 read-only # Linux bootable partition config ends diff --git a/README_CRYPT.TXT b/README_CRYPT.TXT index 083891b58..d8a0dd878 100644 --- a/README_CRYPT.TXT +++ b/README_CRYPT.TXT @@ -306,10 +306,10 @@ needed to unlock the root filesystem, so that the kernel can start the init program. In the example command line below which creates the 'initrd.gz'
image I assume that the root filesystem is 'ext3', we used the mapped device
'cryptroot' for the root filesystem on the real partition '/dev/sdx1',
-and are running the Slackware 13.0 default SMP kernel '2.6.29.6-smp'
+and are running the Slackware 13.1 default SMP kernel '2.6.33.4-smp'
and we did not use Logical Volumes (more about that in the next section):
- # mkinitrd -c -k 2.6.29.6-smp -m ext3 -f ext3 -r cryptroot -C /dev/sdx1
+ # mkinitrd -c -k 2.6.33.4-smp -m ext3 -f ext3 -r cryptroot -C /dev/sdx1
* The resulting initrd image will be written to the file '/boot/initrd.gz'
by default. We still need to tell lilo about this initrd. Open the
@@ -317,7 +317,7 @@ configuration file '/etc/lilo.conf' in an editor such as vi or pico - it should already have been generated by the 'liloconfig' part of setup.
Look for the "Linux bootable partition config" and add a line for the initrd.
We also need to change the kernel file to a generic kernel, because lilo
-is unable to combine the 'huge' kernels in Slackware 13.0 with an initrd
+is unable to combine the 'huge' kernels in Slackware 13.1 with an initrd
image - it will complain about "The initial RAM disk is too big to fit
between the kernel and the 15M-16M memory hole" if you try with a 'huge'
kernel. We can live with that, since the 'huge' kernels are not meant
@@ -325,7 +325,7 @@ for day-to-day use anyway. They are meant to install Slackware on a wide range of computers and that is why they are 'huge'. The linux part of
'/etc/lilo.conf' should end up looking somewhat like this:
-image = /boot/vmlinuz-generic-smp-2.6.29.6-smp
+image = /boot/vmlinuz-generic-smp-2.6.33.4-smp
initrd = /boot/initrd.gz
root = /dev/mapper/cryptroot
label = linux
@@ -366,7 +366,7 @@ One, you will need to enter a passphrase for every partition you have encrypted (except for the swap which Slackware encrypts with a random passphrase
on every boot). Two, the method used for encrypting the swap partition
prohibits the use of the swap as a hibernation partition. And since the
-initrd of Slackware 13.0 supports hibernation, it would be a shame not to be
+initrd of Slackware 13.1 supports hibernation, it would be a shame not to be
able to use this feature on your laptop (which, because of it's portability,
is the primary target for full disk encryption anyway).
@@ -489,10 +489,10 @@ stage of booting the kernel. The initial ramdisk (initrd) contains a small filesystem with the tools needed to unlock the root filesystem, so that
the kernel can start the init program. In the example command line below
which creates the 'initrd.gz' image I assume that you formatted the root
-filesystem as 'ext3', and will be running the Slackware 13.0 default SMP
-kernel '2.6.29.6-smp' :
+filesystem as 'ext3', and will be running the Slackware 13.1 default SMP
+kernel '2.6.33.4-smp' :
- # mkinitrd -c -k 2.6.29.6-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L
+ # mkinitrd -c -k 2.6.33.4-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L
NOTE: if you use a non-US keyboard and need to enter a passphrase during boot,
this may be problematic if the keyboard mapping is US while Slackware
@@ -508,7 +508,7 @@ configuration file '/etc/lilo.conf' in an editor such as vi or pico - it should already have been generated by the 'liloconfig' part of setup.
Look for the "Linux bootable partition config" and add a line for the initrd.
We also need to change the kernel file to a generic kernel, because lilo
-is unable to combine the 'huge' kernels in Slackware 13.0 with an initrd
+is unable to combine the 'huge' kernels in Slackware 13.1 with an initrd
image - it will complain about "The initial RAM disk is too big to fit
between the kernel and the 15M-16M memory hole" if you try a 'huge'
kernel. We can live with that, since the 'huge' kernels are not meant
@@ -516,7 +516,7 @@ for day-to-day use anyway. They are meant to install Slackware on a wide range of computers and that is why they are 'huge'. The linux part of
'/etc/lilo.conf' should end up looking somewhat like this:
-image = /boot/vmlinuz-generic-smp-2.6.29.6-smp
+image = /boot/vmlinuz-generic-smp-2.6.33.4-smp
initrd = /boot/initrd.gz
root = /dev/cryptvg/root
label = linux
@@ -604,7 +604,7 @@ Do not compile these as module! They are required in your kernel. A mkinitrd helper script
------------------------
- The mkinitrd package in Slackware 13.0 ships with a script called
+ The mkinitrd package in Slackware 13.1 ships with a script called
'mkinitrd_command_generator.sh'. If you run this script, it will analyze
your Slackware configuration and make a smart suggestion about the 'mkinitrd'
command you have to type in order to create an initrd.gz with all the bells
@@ -619,7 +619,7 @@ by yourself: It should emit a string like this (your system will probably give different
parameter values):
-mkinitrd -c -k 2.6.29.6-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L
+mkinitrd -c -k 2.6.33.4-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L
You can copy and paste this output to your command prompt, and add any other
parameters you need such as "-h" to indicate a hibernation partition or
diff --git a/README_LVM.TXT b/README_LVM.TXT index 87c45cf2c..94cd5ad8a 100644 --- a/README_LVM.TXT +++ b/README_LVM.TXT @@ -11,7 +11,7 @@ installation to Logical Volumes. In Slackware, the installer has never supported this, but the gurus usually would find a way to create logical
volumes and install or migrate their Slackware onto those. Having your
Slackware installed fully on LVM was near impossible until Slackware 12.0.
-Slackware 13.0 has improved support for LVM built into the installer.
+Slackware 13.1 has improved support for LVM built into the installer.
Preparing Logical Volumes (LV)
@@ -110,9 +110,9 @@ We are going to 'chroot' into our fresh installation: Next, while we are in the chroot, create the initrd with LVM support -
in the example command line I assume that the root filesystem is 'ext3',
we used the LV '/dev/myvg/root' as the root device, and are running the
-Slackware 13.0 default SMP kernel '2.6.29.6-smp':
+Slackware 13.1 default SMP kernel '2.6.33.4-smp':
- # mkinitrd -c -k 2.6.29.6-smp -m ext3 -f ext3 -r /dev/myvg/root -L
+ # mkinitrd -c -k 2.6.33.4-smp -m ext3 -f ext3 -r /dev/myvg/root -L
The resulting initrd image will be written to the file '/boot/initrd.gz'
by default. We still need to tell lilo about this initrd, so open the
@@ -124,7 +124,7 @@ filename added by 'liloconfig' is '/boot/vmlinuz' which is a symbolic link to the huge SMP kernel. Remember that we need a 'generic' kernel with the initrd.
The end result should look somewhat like this:
- image = /boot/vmlinuz-generic-smp-2.6.29.6-smp
+ image = /boot/vmlinuz-generic-smp-2.6.33.4-smp
initrd = /boot/initrd.gz
root = /dev/myvg/root
label = linux
diff --git a/READ_DVD.TXT b/READ_DVD.TXT index 9fe54b21f..b74f36f7d 100644 --- a/READ_DVD.TXT +++ b/READ_DVD.TXT @@ -1,11 +1,11 @@ -Welcome to the Slackware Linux version 13.0 64-bit x86_64 DVD.
+Welcome to the Slackware Linux version 13.1 64-bit x86_64 DVD.
Here's a tree showing the contents of this disc. For complete details,
see additional documentation files.
.
-|-- ANNOUNCE.13_0
+|-- ANNOUNCE.13_1
|-- BOOTING.TXT
|-- CHANGES_AND_HINTS.TXT
|-- CHECKSUMS.md5
@@ -28,6 +28,7 @@ see additional documentation files. |-- SPEAKUP_DOCS.TXT
|-- SPEAK_INSTALL.TXT
|-- Slackware-HOWTO
+|-- UPGRADE.TXT
|-- extra
| |-- CHECKSUMS.md5
| |-- CHECKSUMS.md5.asc
@@ -280,23 +281,31 @@ see additional documentation files. | | |-- aspell-zu-0.50_0-noarch-4.txz
| | `-- aspell-zu-0.50_0-noarch-4.txz.asc
| |-- bash-completion
-| | |-- bash-completion-20060301-noarch-2.txt
-| | |-- bash-completion-20060301-noarch-2.txz
-| | `-- bash-completion-20060301-noarch-2.txz.asc
+| | |-- bash-completion-1.1-noarch-3.txt
+| | |-- bash-completion-1.1-noarch-3.txz
+| | `-- bash-completion-1.1-noarch-3.txz.asc
+| |-- bittornado
+| | |-- bittornado-0.3.18-noarch-2.txt
+| | |-- bittornado-0.3.18-noarch-2.txz
+| | `-- bittornado-0.3.18-noarch-2.txz.asc
| |-- bittorrent
| | |-- README
| | |-- bittorrent-4.4.0-noarch-3.txt
| | |-- bittorrent-4.4.0-noarch-3.txz
| | `-- bittorrent-4.4.0-noarch-3.txz.asc
| |-- brltty
-| | |-- brltty-4.0-x86_64-1.txt
-| | |-- brltty-4.0-x86_64-1.txz
-| | `-- brltty-4.0-x86_64-1.txz.asc
+| | |-- brltty-4.2-x86_64-1.txt
+| | |-- brltty-4.2-x86_64-1.txz
+| | `-- brltty-4.2-x86_64-1.txz.asc
+| |-- emacspeak
+| | |-- emacspeak-32.0-x86_64-1.txt
+| | |-- emacspeak-32.0-x86_64-1.txz
+| | `-- emacspeak-32.0-x86_64-1.txz.asc
| |-- flashplayer-plugin -> source/flashplayer-plugin
| |-- jdk-6
-| | |-- jdk-6u16-x86_64-1.txt
-| | |-- jdk-6u16-x86_64-1.txz
-| | `-- jdk-6u16-x86_64-1.txz.asc
+| | |-- jdk-6u20-x86_64-1.txt
+| | |-- jdk-6u20-x86_64-1.txz
+| | `-- jdk-6u20-x86_64-1.txz.asc
| |-- kde3-compat
| | |-- arts-1.5.10-x86_64-opt1.txt
| | |-- arts-1.5.10-x86_64-opt1.txz
@@ -310,34 +319,36 @@ see additional documentation files. | | |-- qt3-3.3.8b-x86_64-opt2.txt
| | |-- qt3-3.3.8b-x86_64-opt2.txz
| | `-- qt3-3.3.8b-x86_64-opt2.txz.asc
-| |-- mpg123
-| | |-- mpg123-0.65-x86_64-1.txt
-| | |-- mpg123-0.65-x86_64-1.txz
-| | `-- mpg123-0.65-x86_64-1.txz.asc
| |-- mplayerplug-in
| | |-- mplayerplug-in-3.55-x86_64-1.txt
| | |-- mplayerplug-in-3.55-x86_64-1.txz
| | `-- mplayerplug-in-3.55-x86_64-1.txz.asc
| |-- partitionmanager
-| | |-- partitionmanager-1.0.0_BETA1-x86_64-1.txt
-| | |-- partitionmanager-1.0.0_BETA1-x86_64-1.txz
-| | `-- partitionmanager-1.0.0_BETA1-x86_64-1.txz.asc
+| | |-- partitionmanager-1.0.2-x86_64-1.txt
+| | |-- partitionmanager-1.0.2-x86_64-1.txz
+| | `-- partitionmanager-1.0.2-x86_64-1.txz.asc
| |-- recordmydesktop
| | |-- recordmydesktop-0.3.8.1-x86_64-2.txt
| | |-- recordmydesktop-0.3.8.1-x86_64-2.txz
| | `-- recordmydesktop-0.3.8.1-x86_64-2.txz.asc
| |-- slacktrack
| | |-- OVERVIEW
-| | |-- slacktrack-2.06-x86_64-1.txt
-| | |-- slacktrack-2.06-x86_64-1.txz
-| | `-- slacktrack-2.06-x86_64-1.txz.asc
+| | |-- slacktrack-2.07-x86_64-1.txt
+| | |-- slacktrack-2.07-x86_64-1.txz
+| | `-- slacktrack-2.07-x86_64-1.txz.asc
| |-- source
| | |-- bash-completion
-| | | |-- bash-completion-20060301.tar.bz2
-| | | |-- bash-completion-xz.diff.gz
+| | | |-- bash-completion-1.1-pkgtools_tgxz.diff.gz
+| | | |-- bash-completion-1.1.tar.bz2
| | | |-- bash-completion.SlackBuild
| | | |-- bash_completion.sh.gz
| | | `-- slack-desc
+| | |-- bittornado
+| | | |-- BitTornado-0.3.18.tar.bz2
+| | | |-- bittornado.SlackBuild
+| | | |-- btdownloadxterm.sh.gz
+| | | |-- doinst.sh.gz
+| | | `-- slack-desc
| | |-- bittorrent
| | | |-- BitTorrent-4.4.0.tar.bz2
| | | |-- bittorrent-xterm.sh.gz
@@ -345,9 +356,14 @@ see additional documentation files. | | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- brltty
-| | | |-- brltty-4.0.tar.xz
+| | | |-- brltty-4.2.tar.xz
| | | |-- brltty.SlackBuild
| | | `-- slack-desc
+| | |-- emacspeak
+| | | |-- emacspeak-32.0.tar.xz
+| | | |-- emacspeak-32.0.tcl8.5.diff.gz
+| | | |-- emacspeak.SlackBuild
+| | | `-- slack-desc
| | |-- flashplayer-plugin
| | | |-- flashplayer-plugin.SlackBuild
| | | `-- slack-desc
@@ -367,6 +383,7 @@ see additional documentation files. | | | |-- README.html
| | | |-- README_ja.html
| | | |-- README_zh_CN.html
+| | | |-- THIRDPARTYLICENSEREADME.txt
| | | |-- jdk.SlackBuild
| | | |-- profile.d
| | | | |-- jdk.csh
@@ -405,18 +422,13 @@ see additional documentation files. | | | |-- qt.x86.cflags.diff.gz
| | | |-- qt3.SlackBuild
| | | `-- slack-desc
-| | |-- mpg123
-| | | |-- mpg123-0.65.tar.bz2
-| | | |-- mpg123-0.65.tar.bz2.sig
-| | | |-- mpg123.SlackBuild
-| | | `-- slack-desc
| | |-- mplayerplug-in
| | | |-- mplayerplug-in-3.55.tar.gz
| | | |-- mplayerplug-in.SlackBuild
| | | `-- slack-desc
| | |-- partitionmanager
| | | |-- doinst.sh.gz
-| | | |-- partitionmanager-1.0.0-BETA1.tar.bz2
+| | | |-- partitionmanager-1.0.2.tar.xz
| | | |-- partitionmanager.SlackBuild
| | | `-- slack-desc
| | |-- recordmydesktop
@@ -425,7 +437,7 @@ see additional documentation files. | | | |-- recordmydesktop.SlackBuild
| | | `-- slack-desc
| | |-- slacktrack
-| | | |-- slacktrack-2.06-source.tar.gz
+| | | |-- slacktrack-2.07-source.tar.gz
| | | `-- slacktrack.SlackBuild
| | |-- tightvnc
| | | |-- _tightvnc.tar.gz
@@ -438,9 +450,10 @@ see additional documentation files. | | | |-- README.SLACKWARE
| | | |-- doinst.sh.gz
| | | |-- slack-desc
-| | | |-- wicd-1.6.2.1.tar.bz2
+| | | |-- wicd-1.7.0-fix_EAP_fast_typo.diff.gz
+| | | |-- wicd-1.7.0-fix_script_bug.diff.gz
+| | | |-- wicd-1.7.0.tar.bz2
| | | `-- wicd.SlackBuild
-| | |-- xfce-goodies
| | `-- yasm
| | |-- slack-desc
| | |-- yasm-0.8.0.tar.gz
@@ -451,22 +464,9 @@ see additional documentation files. | | `-- tightvnc-1.3.10-x86_64-1.txz.asc
| |-- wicd
| | |-- README.SLACKWARE
-| | |-- wicd-1.6.2.1-x86_64-1.txt
-| | |-- wicd-1.6.2.1-x86_64-1.txz
-| | `-- wicd-1.6.2.1-x86_64-1.txz.asc
-| |-- xf86-video-intel-alternate
-| | |-- xf86-video-intel-2.5.1-x86_64-1.txt
-| | |-- xf86-video-intel-2.5.1-x86_64-1.txz
-| | |-- xf86-video-intel-2.5.1-x86_64-1.txz.asc
-| | |-- xf86-video-intel-2.6.3-x86_64-1.txt
-| | |-- xf86-video-intel-2.6.3-x86_64-1.txz
-| | |-- xf86-video-intel-2.6.3-x86_64-1.txz.asc
-| | |-- xf86-video-intel-2.7.1-x86_64-2.txt
-| | |-- xf86-video-intel-2.7.1-x86_64-2.txz
-| | |-- xf86-video-intel-2.7.1-x86_64-2.txz.asc
-| | |-- xf86-video-intel-2.8.1-x86_64-1.txt
-| | |-- xf86-video-intel-2.8.1-x86_64-1.txz
-| | `-- xf86-video-intel-2.8.1-x86_64-1.txz.asc
+| | |-- wicd-1.7.0-x86_64-2.txt
+| | |-- wicd-1.7.0-x86_64-2.txz
+| | `-- wicd-1.7.0-x86_64-2.txz.asc
| `-- yasm
| |-- yasm-0.8.0-x86_64-1.txt
| |-- yasm-0.8.0-x86_64-1.txz
@@ -501,154 +501,161 @@ see additional documentation files. | |-- bzImage
| |-- config
| `-- speakup_decpc.ko
+|-- misc
+| `-- slackbook
+| |-- html
+| | |-- TRADEMARKS.html
+| | |-- archive-files-bzip2.html
+| | |-- archive-files-tar.html
+| | |-- archive-files-zip.html
+| | |-- archive-files.html
+| | |-- basic-network-commands
+| | | |-- elm.png
+| | | |-- links.png
+| | | |-- lynx.png
+| | | |-- mutt.png
+| | | |-- pine.png
+| | | |-- talk.png
+| | | `-- ytalk.png
+| | |-- basic-network-commands-dns.html
+| | |-- basic-network-commands-email.html
+| | |-- basic-network-commands-finger.html
+| | |-- basic-network-commands-ftp.html
+| | |-- basic-network-commands-ssh.html
+| | |-- basic-network-commands-talk.html
+| | |-- basic-network-commands-telnet.html
+| | |-- basic-network-commands-traceroute.html
+| | |-- basic-network-commands-web.html
+| | |-- basic-network-commands.html
+| | |-- book-preface.html
+| | |-- book.html
+| | |-- booting
+| | | |-- setup-lilo-expert-w.png
+| | | `-- setup-lilo-w.png
+| | |-- booting-dual.html
+| | |-- booting-loadlin.html
+| | |-- booting.html
+| | |-- docbook.css
+| | |-- emacs
+| | | `-- emacs.png
+| | |-- emacs-basic-editing.html
+| | |-- emacs-buffers.html
+| | |-- emacs-modes.html
+| | |-- emacs-saving-files.html
+| | |-- emacs.html
+| | |-- essential-sysadmin-hardusers.html
+| | |-- essential-sysadmin-shutdown.html
+| | |-- essential-sysadmin.html
+| | |-- file-commands-copymove.html
+| | |-- file-commands-creation.html
+| | |-- file-commands-deletion.html
+| | |-- file-commands-link.html
+| | |-- file-commands-output.html
+| | |-- file-commands-pagers.html
+| | |-- file-commands.html
+| | |-- filesystem-structure-links.html
+| | |-- filesystem-structure-mounting.html
+| | |-- filesystem-structure-nfs.html
+| | |-- filesystem-structure-permissions.html
+| | |-- filesystem-structure.html
+| | |-- glossary.html
+| | |-- gpl.html
+| | |-- help-online.html
+| | |-- help.html
+| | |-- imagelib
+| | | `-- admon
+| | | |-- note.png
+| | | `-- warning.png
+| | |-- index.html
+| | |-- installation
+| | | |-- setup-bootdisk-w.png
+| | | |-- setup-font-w.png
+| | | |-- setup-hardware-clock-w.png
+| | | |-- setup-help-w.png
+| | | |-- setup-install-w.png
+| | | |-- setup-kernel-w.png
+| | | |-- setup-keymap-w.png
+| | | |-- setup-lilo-w.png
+| | | |-- setup-modem-w.png
+| | | |-- setup-mouse-w.png
+| | | |-- setup-program-w.png
+| | | |-- setup-select-w.png
+| | | |-- setup-source-w.png
+| | | |-- setup-swap-w.png
+| | | |-- setup-target-w.png
+| | | |-- setup-timezone-w.png
+| | | `-- setup-xwmconfig-w.png
+| | |-- installation-partitioning.html
+| | |-- installation-requirements.html
+| | |-- installation-setup.html
+| | |-- installation.html
+| | |-- introduction-opensource.html
+| | |-- introduction-slackware.html
+| | |-- introduction.html
+| | |-- network-configuration-hardware.html
+| | |-- network-configuration-nfs.html
+| | |-- network-configuration-ppp.html
+| | |-- network-configuration-tcpip.html
+| | |-- network-configuration-wireless.html
+| | |-- network-configuration.html
+| | |-- package-management
+| | | |-- pkgtool-view-w.png
+| | | `-- pkgtool-w.png
+| | |-- package-management-making-packages.html
+| | |-- package-management-making-tags-and-tagfiles.html
+| | |-- package-management-package-utilities.html
+| | |-- package-management.html
+| | |-- process-control-foregrounding.html
+| | |-- process-control-kill.html
+| | |-- process-control-ps.html
+| | |-- process-control-top.html
+| | |-- process-control.html
+| | |-- security-current.html
+| | |-- security-host.html
+| | |-- security.html
+| | |-- shell-bash.html
+| | |-- shell-command-line.html
+| | |-- shell-vt.html
+| | |-- shell.html
+| | |-- slackware_logo.png
+| | |-- system-configuration
+| | | `-- make-menuconfig-w.png
+| | |-- system-configuration-kernel.html
+| | |-- system-configuration.html
+| | |-- vi
+| | | `-- vim-splitedit.png
+| | |-- vi-configuration.html
+| | |-- vi-keys.html
+| | |-- vi-modes.html
+| | |-- vi-opening-files.html
+| | |-- vi-quitting-vi.html
+| | |-- vi-saving-files.html
+| | |-- vi.html
+| | |-- x-window-system
+| | | |-- xorgconfig1-w.png
+| | | |-- xorgconfig2-w.png
+| | | |-- xorgconfig3-w.png
+| | | |-- xorgconfig4-w.png
+| | | `-- xwmconfig-w.png
+| | |-- x-window-system-xdm.html
+| | |-- x-window-system-xinitrc.html
+| | |-- x-window-system-xorgsetup.html
+| | |-- x-window-system-xwmconfig.html
+| | |-- x-window-system.html
+| | |-- zipslack-booting.html
+| | |-- zipslack-getting.html
+| | `-- zipslack.html
+| |-- slackbook-2.0.pdf
+| `-- slackbook-2.0.ps
|-- pasture
| |-- CHECKSUMS.md5.asc
| `-- source
-|-- slackbook
-| |-- html
-| | |-- TRADEMARKS.html
-| | |-- archive-files-bzip2.html
-| | |-- archive-files-tar.html
-| | |-- archive-files-zip.html
-| | |-- archive-files.html
-| | |-- basic-network-commands
-| | | |-- elm.png
-| | | |-- links.png
-| | | |-- lynx.png
-| | | |-- mutt.png
-| | | |-- pine.png
-| | | |-- talk.png
-| | | `-- ytalk.png
-| | |-- basic-network-commands-dns.html
-| | |-- basic-network-commands-email.html
-| | |-- basic-network-commands-finger.html
-| | |-- basic-network-commands-ftp.html
-| | |-- basic-network-commands-ssh.html
-| | |-- basic-network-commands-talk.html
-| | |-- basic-network-commands-telnet.html
-| | |-- basic-network-commands-traceroute.html
-| | |-- basic-network-commands-web.html
-| | |-- basic-network-commands.html
-| | |-- book-preface.html
-| | |-- book.html
-| | |-- booting
-| | | |-- setup-lilo-expert-w.png
-| | | `-- setup-lilo-w.png
-| | |-- booting-dual.html
-| | |-- booting-loadlin.html
-| | |-- booting.html
-| | |-- docbook.css
-| | |-- emacs
-| | | `-- emacs.png
-| | |-- emacs-basic-editing.html
-| | |-- emacs-buffers.html
-| | |-- emacs-modes.html
-| | |-- emacs-saving-files.html
-| | |-- emacs.html
-| | |-- essential-sysadmin-hardusers.html
-| | |-- essential-sysadmin-shutdown.html
-| | |-- essential-sysadmin.html
-| | |-- file-commands-copymove.html
-| | |-- file-commands-creation.html
-| | |-- file-commands-deletion.html
-| | |-- file-commands-link.html
-| | |-- file-commands-output.html
-| | |-- file-commands-pagers.html
-| | |-- file-commands.html
-| | |-- filesystem-structure-links.html
-| | |-- filesystem-structure-mounting.html
-| | |-- filesystem-structure-nfs.html
-| | |-- filesystem-structure-permissions.html
-| | |-- filesystem-structure.html
-| | |-- glossary.html
-| | |-- gpl.html
-| | |-- help-online.html
-| | |-- help.html
-| | |-- imagelib
-| | | `-- admon
-| | | |-- note.png
-| | | `-- warning.png
-| | |-- index.html
-| | |-- installation
-| | | |-- setup-bootdisk-w.png
-| | | |-- setup-font-w.png
-| | | |-- setup-hardware-clock-w.png
-| | | |-- setup-help-w.png
-| | | |-- setup-install-w.png
-| | | |-- setup-kernel-w.png
-| | | |-- setup-keymap-w.png
-| | | |-- setup-lilo-w.png
-| | | |-- setup-modem-w.png
-| | | |-- setup-mouse-w.png
-| | | |-- setup-program-w.png
-| | | |-- setup-select-w.png
-| | | |-- setup-source-w.png
-| | | |-- setup-swap-w.png
-| | | |-- setup-target-w.png
-| | | |-- setup-timezone-w.png
-| | | `-- setup-xwmconfig-w.png
-| | |-- installation-partitioning.html
-| | |-- installation-requirements.html
-| | |-- installation-setup.html
-| | |-- installation.html
-| | |-- introduction-opensource.html
-| | |-- introduction-slackware.html
-| | |-- introduction.html
-| | |-- network-configuration-hardware.html
-| | |-- network-configuration-nfs.html
-| | |-- network-configuration-ppp.html
-| | |-- network-configuration-tcpip.html
-| | |-- network-configuration-wireless.html
-| | |-- network-configuration.html
-| | |-- package-management
-| | | |-- pkgtool-view-w.png
-| | | `-- pkgtool-w.png
-| | |-- package-management-making-packages.html
-| | |-- package-management-making-tags-and-tagfiles.html
-| | |-- package-management-package-utilities.html
-| | |-- package-management.html
-| | |-- process-control-foregrounding.html
-| | |-- process-control-kill.html
-| | |-- process-control-ps.html
-| | |-- process-control-top.html
-| | |-- process-control.html
-| | |-- security-current.html
-| | |-- security-host.html
-| | |-- security.html
-| | |-- shell-bash.html
-| | |-- shell-command-line.html
-| | |-- shell-vt.html
-| | |-- shell.html
-| | |-- slackware_logo.png
-| | |-- system-configuration
-| | | `-- make-menuconfig-w.png
-| | |-- system-configuration-kernel.html
-| | |-- system-configuration.html
-| | |-- vi
-| | | `-- vim-splitedit.png
-| | |-- vi-configuration.html
-| | |-- vi-keys.html
-| | |-- vi-modes.html
-| | |-- vi-opening-files.html
-| | |-- vi-quitting-vi.html
-| | |-- vi-saving-files.html
-| | |-- vi.html
-| | |-- x-window-system
-| | | |-- xorgconfig1-w.png
-| | | |-- xorgconfig2-w.png
-| | | |-- xorgconfig3-w.png
-| | | |-- xorgconfig4-w.png
-| | | `-- xwmconfig-w.png
-| | |-- x-window-system-xdm.html
-| | |-- x-window-system-xinitrc.html
-| | |-- x-window-system-xorgsetup.html
-| | |-- x-window-system-xwmconfig.html
-| | |-- x-window-system.html
-| | |-- zipslack-booting.html
-| | |-- zipslack-getting.html
-| | `-- zipslack.html
-| |-- slackbook-2.0.pdf
-| `-- slackbook-2.0.ps
+|-- patches
+| |-- CHECKSUMS.md5
+| |-- CHECKSUMS.md5.asc
+| |-- FILE_LIST
+| |-- MANIFEST.bz2
+| `-- PACKAGES.TXT
|-- slackware64
| |-- CHECKSUMS.md5
| |-- CHECKSUMS.md5.asc
@@ -656,60 +663,60 @@ see additional documentation files. | |-- MANIFEST.bz2
| |-- PACKAGES.TXT -> ../PACKAGES.TXT
| |-- a
-| | |-- aaa_base-13.0-x86_64-2.txt
-| | |-- aaa_base-13.0-x86_64-2.txz
-| | |-- aaa_base-13.0-x86_64-2.txz.asc
-| | |-- aaa_elflibs-13.0-x86_64-2.txt
-| | |-- aaa_elflibs-13.0-x86_64-2.txz
-| | |-- aaa_elflibs-13.0-x86_64-2.txz.asc
+| | |-- aaa_base-13.1-x86_64-2.txt
+| | |-- aaa_base-13.1-x86_64-2.txz
+| | |-- aaa_base-13.1-x86_64-2.txz.asc
+| | |-- aaa_elflibs-13.1-x86_64-1.txt
+| | |-- aaa_elflibs-13.1-x86_64-1.txz
+| | |-- aaa_elflibs-13.1-x86_64-1.txz.asc
| | |-- aaa_terminfo-5.7-noarch-1.txt
| | |-- aaa_terminfo-5.7-noarch-1.txz
| | |-- aaa_terminfo-5.7-noarch-1.txz.asc
| | |-- acl-2.2.47_1-x86_64-1.txt
| | |-- acl-2.2.47_1-x86_64-1.txz
| | |-- acl-2.2.47_1-x86_64-1.txz.asc
-| | |-- acpid-1.0.8-x86_64-2.txt
-| | |-- acpid-1.0.8-x86_64-2.txz
-| | |-- acpid-1.0.8-x86_64-2.txz.asc
+| | |-- acpid-2.0.5-x86_64-1.txt
+| | |-- acpid-2.0.5-x86_64-1.txz
+| | |-- acpid-2.0.5-x86_64-1.txz.asc
| | |-- apmd-3.2.2-x86_64-2.txt
| | |-- apmd-3.2.2-x86_64-2.txz
| | |-- apmd-3.2.2-x86_64-2.txz.asc
| | |-- attr-2.4.43_1-x86_64-1.txt
| | |-- attr-2.4.43_1-x86_64-1.txz
| | |-- attr-2.4.43_1-x86_64-1.txz.asc
-| | |-- bash-3.1.017-x86_64-2.txt
-| | |-- bash-3.1.017-x86_64-2.txz
-| | |-- bash-3.1.017-x86_64-2.txz.asc
+| | |-- bash-4.1.007-x86_64-1.txt
+| | |-- bash-4.1.007-x86_64-1.txz
+| | |-- bash-4.1.007-x86_64-1.txz.asc
| | |-- bin-11.1-x86_64-1.txt
| | |-- bin-11.1-x86_64-1.txz
| | |-- bin-11.1-x86_64-1.txz.asc
| | |-- bzip2-1.0.5-x86_64-1.txt
| | |-- bzip2-1.0.5-x86_64-1.txz
| | |-- bzip2-1.0.5-x86_64-1.txz.asc
-| | |-- coreutils-7.4-x86_64-1.txt
-| | |-- coreutils-7.4-x86_64-1.txz
-| | |-- coreutils-7.4-x86_64-1.txz.asc
+| | |-- coreutils-8.5-x86_64-3.txt
+| | |-- coreutils-8.5-x86_64-3.txz
+| | |-- coreutils-8.5-x86_64-3.txz.asc
| | |-- cpio-2.9-x86_64-2.txt
| | |-- cpio-2.9-x86_64-2.txz
| | |-- cpio-2.9-x86_64-2.txz.asc
-| | |-- cryptsetup-1.0.7-x86_64-1.txt
-| | |-- cryptsetup-1.0.7-x86_64-1.txz
-| | |-- cryptsetup-1.0.7-x86_64-1.txz.asc
-| | |-- cups-1.3.11-x86_64-1.txt
-| | |-- cups-1.3.11-x86_64-1.txz
-| | |-- cups-1.3.11-x86_64-1.txz.asc
-| | |-- cxxlibs-6.0.10-x86_64-1.txt
-| | |-- cxxlibs-6.0.10-x86_64-1.txz
-| | |-- cxxlibs-6.0.10-x86_64-1.txz.asc
-| | |-- dbus-1.2.14-x86_64-1.txt
-| | |-- dbus-1.2.14-x86_64-1.txz
-| | |-- dbus-1.2.14-x86_64-1.txz.asc
-| | |-- dcron-2.3.3-x86_64-6.txt
-| | |-- dcron-2.3.3-x86_64-6.txz
-| | |-- dcron-2.3.3-x86_64-6.txz.asc
-| | |-- device-mapper-1.02.28-x86_64-1.txt
-| | |-- device-mapper-1.02.28-x86_64-1.txz
-| | |-- device-mapper-1.02.28-x86_64-1.txz.asc
+| | |-- cpufrequtils-007-x86_64-1.txt
+| | |-- cpufrequtils-007-x86_64-1.txz
+| | |-- cpufrequtils-007-x86_64-1.txz.asc
+| | |-- cryptsetup-1.1.0-x86_64-2.txt
+| | |-- cryptsetup-1.1.0-x86_64-2.txz
+| | |-- cryptsetup-1.1.0-x86_64-2.txz.asc
+| | |-- cups-1.4.3-x86_64-3.txt
+| | |-- cups-1.4.3-x86_64-3.txz
+| | |-- cups-1.4.3-x86_64-3.txz.asc
+| | |-- cxxlibs-6.0.13-x86_64-2.txt
+| | |-- cxxlibs-6.0.13-x86_64-2.txz
+| | |-- cxxlibs-6.0.13-x86_64-2.txz.asc
+| | |-- dbus-1.2.24-x86_64-2.txt
+| | |-- dbus-1.2.24-x86_64-2.txz
+| | |-- dbus-1.2.24-x86_64-2.txz.asc
+| | |-- dcron-4.4-x86_64-1.txt
+| | |-- dcron-4.4-x86_64-1.txz
+| | |-- dcron-4.4-x86_64-1.txz.asc
| | |-- devs-2.3.1-noarch-25.txt
| | |-- devs-2.3.1-noarch-25.txz
| | |-- devs-2.3.1-noarch-25.txz.asc
@@ -719,115 +726,115 @@ see additional documentation files. | | |-- dosfstools-2.11-x86_64-1.txt
| | |-- dosfstools-2.11-x86_64-1.txz
| | |-- dosfstools-2.11-x86_64-1.txz.asc
-| | |-- e2fsprogs-1.41.8-x86_64-1.txt
-| | |-- e2fsprogs-1.41.8-x86_64-1.txz
-| | |-- e2fsprogs-1.41.8-x86_64-1.txz.asc
+| | |-- e2fsprogs-1.41.11-x86_64-1.txt
+| | |-- e2fsprogs-1.41.11-x86_64-1.txz
+| | |-- e2fsprogs-1.41.11-x86_64-1.txz.asc
| | |-- ed-1.3-x86_64-1.txt
| | |-- ed-1.3-x86_64-1.txz
| | |-- ed-1.3-x86_64-1.txz.asc
-| | |-- eject-2.1.5-x86_64-1.txt
-| | |-- eject-2.1.5-x86_64-1.txz
-| | |-- eject-2.1.5-x86_64-1.txz.asc
+| | |-- eject-2.1.5-x86_64-2.txt
+| | |-- eject-2.1.5-x86_64-2.txz
+| | |-- eject-2.1.5-x86_64-2.txz.asc
| | |-- elvis-2.2_0-x86_64-2.txt
| | |-- elvis-2.2_0-x86_64-2.txz
| | |-- elvis-2.2_0-x86_64-2.txz.asc
-| | |-- etc-13.0-x86_64-2.txt
-| | |-- etc-13.0-x86_64-2.txz
-| | |-- etc-13.0-x86_64-2.txz.asc
-| | |-- file-5.03-x86_64-1.txt
-| | |-- file-5.03-x86_64-1.txz
-| | |-- file-5.03-x86_64-1.txz.asc
+| | |-- etc-13.013-x86_64-1.txt
+| | |-- etc-13.013-x86_64-1.txz
+| | |-- etc-13.013-x86_64-1.txz.asc
+| | |-- file-5.04-x86_64-1.txt
+| | |-- file-5.04-x86_64-1.txz
+| | |-- file-5.04-x86_64-1.txz.asc
| | |-- findutils-4.4.2-x86_64-1.txt
| | |-- findutils-4.4.2-x86_64-1.txz
| | |-- findutils-4.4.2-x86_64-1.txz.asc
| | |-- floppy-5.4-x86_64-3.txt
| | |-- floppy-5.4-x86_64-3.txz
| | |-- floppy-5.4-x86_64-3.txz.asc
-| | |-- gawk-3.1.6-x86_64-2.txt
-| | |-- gawk-3.1.6-x86_64-2.txz
-| | |-- gawk-3.1.6-x86_64-2.txz.asc
+| | |-- gawk-3.1.8-x86_64-1.txt
+| | |-- gawk-3.1.8-x86_64-1.txz
+| | |-- gawk-3.1.8-x86_64-1.txz.asc
| | |-- genpower-1.0.5-x86_64-2.txt
| | |-- genpower-1.0.5-x86_64-2.txz
| | |-- genpower-1.0.5-x86_64-2.txz.asc
-| | |-- gettext-0.17-x86_64-2.txt
-| | |-- gettext-0.17-x86_64-2.txz
-| | |-- gettext-0.17-x86_64-2.txz.asc
+| | |-- gettext-0.17-x86_64-3.txt
+| | |-- gettext-0.17-x86_64-3.txz
+| | |-- gettext-0.17-x86_64-3.txz.asc
| | |-- getty-ps-2.1.0b-x86_64-1.txt
| | |-- getty-ps-2.1.0b-x86_64-1.txz
| | |-- getty-ps-2.1.0b-x86_64-1.txz.asc
-| | |-- glibc-solibs-2.9-x86_64-3.txt
-| | |-- glibc-solibs-2.9-x86_64-3.txz
-| | |-- glibc-solibs-2.9-x86_64-3.txz.asc
-| | |-- glibc-zoneinfo-2.9-noarch-3.txt
-| | |-- glibc-zoneinfo-2.9-noarch-3.txz
-| | |-- glibc-zoneinfo-2.9-noarch-3.txz.asc
+| | |-- glibc-solibs-2.11.1-x86_64-3.txt
+| | |-- glibc-solibs-2.11.1-x86_64-3.txz
+| | |-- glibc-solibs-2.11.1-x86_64-3.txz.asc
+| | |-- glibc-zoneinfo-2.11.1-noarch-3.txt
+| | |-- glibc-zoneinfo-2.11.1-noarch-3.txz
+| | |-- glibc-zoneinfo-2.11.1-noarch-3.txz.asc
| | |-- gpm-1.20.1-x86_64-5.txt
| | |-- gpm-1.20.1-x86_64-5.txz
| | |-- gpm-1.20.1-x86_64-5.txz.asc
| | |-- grep-2.5.4-x86_64-1.txt
| | |-- grep-2.5.4-x86_64-1.txz
| | |-- grep-2.5.4-x86_64-1.txz.asc
-| | |-- gzip-1.3.12-x86_64-1.tgz
-| | |-- gzip-1.3.12-x86_64-1.tgz.asc
-| | |-- gzip-1.3.12-x86_64-1.txt
-| | |-- hdparm-9.3-x86_64-1.txt
-| | |-- hdparm-9.3-x86_64-1.txz
-| | |-- hdparm-9.3-x86_64-1.txz.asc
+| | |-- gzip-1.4-x86_64-1.tgz
+| | |-- gzip-1.4-x86_64-1.tgz.asc
+| | |-- gzip-1.4-x86_64-1.txt
+| | |-- hdparm-9.27-x86_64-1.txt
+| | |-- hdparm-9.27-x86_64-1.txz
+| | |-- hdparm-9.27-x86_64-1.txz.asc
| | |-- infozip-6.0-x86_64-1.txt
| | |-- infozip-6.0-x86_64-1.txz
| | |-- infozip-6.0-x86_64-1.txz.asc
-| | |-- inotify-tools-3.13-x86_64-1.txt
-| | |-- inotify-tools-3.13-x86_64-1.txz
-| | |-- inotify-tools-3.13-x86_64-1.txz.asc
+| | |-- inotify-tools-3.14-x86_64-1.txt
+| | |-- inotify-tools-3.14-x86_64-1.txz
+| | |-- inotify-tools-3.14-x86_64-1.txz.asc
| | |-- install-packages
| | |-- install.end
| | |-- jfsutils-1.1.14-x86_64-1.txt
| | |-- jfsutils-1.1.14-x86_64-1.txz
| | |-- jfsutils-1.1.14-x86_64-1.txz.asc
-| | |-- kbd-1.15-x86_64-3.txt
-| | |-- kbd-1.15-x86_64-3.txz
-| | |-- kbd-1.15-x86_64-3.txz.asc
-| | |-- kernel-firmware-2.6.29.6-noarch-2.txt
-| | |-- kernel-firmware-2.6.29.6-noarch-2.txz
-| | |-- kernel-firmware-2.6.29.6-noarch-2.txz.asc
-| | |-- kernel-generic-2.6.29.6-x86_64-2.txt
-| | |-- kernel-generic-2.6.29.6-x86_64-2.txz
-| | |-- kernel-generic-2.6.29.6-x86_64-2.txz.asc
-| | |-- kernel-huge-2.6.29.6-x86_64-2.txt
-| | |-- kernel-huge-2.6.29.6-x86_64-2.txz
-| | |-- kernel-huge-2.6.29.6-x86_64-2.txz.asc
-| | |-- kernel-modules-2.6.29.6-x86_64-2.txt
-| | |-- kernel-modules-2.6.29.6-x86_64-2.txz
-| | |-- kernel-modules-2.6.29.6-x86_64-2.txz.asc
-| | |-- less-418-x86_64-3.txt
-| | |-- less-418-x86_64-3.txz
-| | |-- less-418-x86_64-3.txz.asc
+| | |-- kbd-1.15.2-x86_64-1.txt
+| | |-- kbd-1.15.2-x86_64-1.txz
+| | |-- kbd-1.15.2-x86_64-1.txz.asc
+| | |-- kernel-firmware-2.6.33.4-noarch-1.txt
+| | |-- kernel-firmware-2.6.33.4-noarch-1.txz
+| | |-- kernel-firmware-2.6.33.4-noarch-1.txz.asc
+| | |-- kernel-generic-2.6.33.4-x86_64-1.txt
+| | |-- kernel-generic-2.6.33.4-x86_64-1.txz
+| | |-- kernel-generic-2.6.33.4-x86_64-1.txz.asc
+| | |-- kernel-huge-2.6.33.4-x86_64-1.txt
+| | |-- kernel-huge-2.6.33.4-x86_64-1.txz
+| | |-- kernel-huge-2.6.33.4-x86_64-1.txz.asc
+| | |-- kernel-modules-2.6.33.4-x86_64-1.txt
+| | |-- kernel-modules-2.6.33.4-x86_64-1.txz
+| | |-- kernel-modules-2.6.33.4-x86_64-1.txz.asc
+| | |-- less-436-x86_64-1.txt
+| | |-- less-436-x86_64-1.txz
+| | |-- less-436-x86_64-1.txz.asc
| | |-- lha-114i-x86_64-1.txt
| | |-- lha-114i-x86_64-1.txz
| | |-- lha-114i-x86_64-1.txz.asc
-| | |-- lilo-22.8-x86_64-14.txt
-| | |-- lilo-22.8-x86_64-14.txz
-| | |-- lilo-22.8-x86_64-14.txz.asc
-| | |-- logrotate-3.7.4-x86_64-1.txt
-| | |-- logrotate-3.7.4-x86_64-1.txz
-| | |-- logrotate-3.7.4-x86_64-1.txz.asc
-| | |-- lvm2-2.02.40-x86_64-1.txt
-| | |-- lvm2-2.02.40-x86_64-1.txz
-| | |-- lvm2-2.02.40-x86_64-1.txz.asc
+| | |-- lilo-22.8-x86_64-15.txt
+| | |-- lilo-22.8-x86_64-15.txz
+| | |-- lilo-22.8-x86_64-15.txz.asc
+| | |-- logrotate-3.7.8-x86_64-1.txt
+| | |-- logrotate-3.7.8-x86_64-1.txz
+| | |-- logrotate-3.7.8-x86_64-1.txz.asc
+| | |-- lvm2-2.02.64-x86_64-1.txt
+| | |-- lvm2-2.02.64-x86_64-1.txz
+| | |-- lvm2-2.02.64-x86_64-1.txz.asc
| | |-- maketag
| | |-- maketag.ez
-| | |-- mdadm-2.6.4-x86_64-1.txt
-| | |-- mdadm-2.6.4-x86_64-1.txz
-| | |-- mdadm-2.6.4-x86_64-1.txz.asc
-| | |-- minicom-2.1-x86_64-3.txt
-| | |-- minicom-2.1-x86_64-3.txz
-| | |-- minicom-2.1-x86_64-3.txz.asc
-| | |-- mkinitrd-1.3.4-x86_64-3.txt
-| | |-- mkinitrd-1.3.4-x86_64-3.txz
-| | |-- mkinitrd-1.3.4-x86_64-3.txz.asc
-| | |-- module-init-tools-3.6-x86_64-2.txt
-| | |-- module-init-tools-3.6-x86_64-2.txz
-| | |-- module-init-tools-3.6-x86_64-2.txz.asc
+| | |-- mdadm-2.6.9-x86_64-1.txt
+| | |-- mdadm-2.6.9-x86_64-1.txz
+| | |-- mdadm-2.6.9-x86_64-1.txz.asc
+| | |-- minicom-2.1-x86_64-4.txt
+| | |-- minicom-2.1-x86_64-4.txz
+| | |-- minicom-2.1-x86_64-4.txz.asc
+| | |-- mkinitrd-1.4.5-x86_64-2.txt
+| | |-- mkinitrd-1.4.5-x86_64-2.txz
+| | |-- mkinitrd-1.4.5-x86_64-2.txz.asc
+| | |-- module-init-tools-3.11.1-x86_64-1.txt
+| | |-- module-init-tools-3.11.1-x86_64-1.txz
+| | |-- module-init-tools-3.11.1-x86_64-1.txz.asc
| | |-- mt-st-0.9b-x86_64-2.txt
| | |-- mt-st-0.9b-x86_64-2.txz
| | |-- mt-st-0.9b-x86_64-2.txz.asc
@@ -837,24 +844,24 @@ see additional documentation files. | | |-- ncompress-4.2.4-x86_64-1.txt
| | |-- ncompress-4.2.4-x86_64-1.txz
| | |-- ncompress-4.2.4-x86_64-1.txz.asc
-| | |-- ntfs-3g-2009.4.4-x86_64-1.txt
-| | |-- ntfs-3g-2009.4.4-x86_64-1.txz
-| | |-- ntfs-3g-2009.4.4-x86_64-1.txz.asc
-| | |-- openssl-solibs-0.9.8k-x86_64-2.txt
-| | |-- openssl-solibs-0.9.8k-x86_64-2.txz
-| | |-- openssl-solibs-0.9.8k-x86_64-2.txz.asc
+| | |-- ntfs-3g-2010.3.6-x86_64-1.txt
+| | |-- ntfs-3g-2010.3.6-x86_64-1.txz
+| | |-- ntfs-3g-2010.3.6-x86_64-1.txz.asc
+| | |-- openssl-solibs-0.9.8n-x86_64-1.txt
+| | |-- openssl-solibs-0.9.8n-x86_64-1.txz
+| | |-- openssl-solibs-0.9.8n-x86_64-1.txz.asc
| | |-- patch-2.5.4-x86_64-1.txt
| | |-- patch-2.5.4-x86_64-1.txz
| | |-- patch-2.5.4-x86_64-1.txz.asc
-| | |-- pciutils-3.1.3-x86_64-1.txt
-| | |-- pciutils-3.1.3-x86_64-1.txz
-| | |-- pciutils-3.1.3-x86_64-1.txz.asc
+| | |-- pciutils-3.1.5-x86_64-1.txt
+| | |-- pciutils-3.1.5-x86_64-1.txz
+| | |-- pciutils-3.1.5-x86_64-1.txz.asc
| | |-- pcmciautils-015-x86_64-2.txt
| | |-- pcmciautils-015-x86_64-2.txz
| | |-- pcmciautils-015-x86_64-2.txz.asc
-| | |-- pkgtools-13.0-noarch-3.tgz
-| | |-- pkgtools-13.0-noarch-3.tgz.asc
-| | |-- pkgtools-13.0-noarch-3.txt
+| | |-- pkgtools-13.1-noarch-1.tgz
+| | |-- pkgtools-13.1-noarch-1.tgz.asc
+| | |-- pkgtools-13.1-noarch-1.txt
| | |-- procps-3.2.7-x86_64-3.txt
| | |-- procps-3.2.7-x86_64-3.txz
| | |-- procps-3.2.7-x86_64-3.txz.asc
@@ -864,27 +871,27 @@ see additional documentation files. | | |-- reiserfsprogs-3.6.21-x86_64-1.txt
| | |-- reiserfsprogs-3.6.21-x86_64-1.txz
| | |-- reiserfsprogs-3.6.21-x86_64-1.txz.asc
-| | |-- rpm2tgz-1.1-x86_64-1.txt
-| | |-- rpm2tgz-1.1-x86_64-1.txz
-| | |-- rpm2tgz-1.1-x86_64-1.txz.asc
-| | |-- sdparm-1.01-x86_64-2.txt
-| | |-- sdparm-1.01-x86_64-2.txz
-| | |-- sdparm-1.01-x86_64-2.txz.asc
-| | |-- sed-4.1.5-x86_64-1.txt
-| | |-- sed-4.1.5-x86_64-1.txz
-| | |-- sed-4.1.5-x86_64-1.txz.asc
-| | |-- shadow-4.0.3-x86_64-18.txt
-| | |-- shadow-4.0.3-x86_64-18.txz
-| | |-- shadow-4.0.3-x86_64-18.txz.asc
+| | |-- rpm2tgz-1.2.1-x86_64-1.txt
+| | |-- rpm2tgz-1.2.1-x86_64-1.txz
+| | |-- rpm2tgz-1.2.1-x86_64-1.txz.asc
+| | |-- sdparm-1.04-x86_64-1.txt
+| | |-- sdparm-1.04-x86_64-1.txz
+| | |-- sdparm-1.04-x86_64-1.txz.asc
+| | |-- sed-4.2.1-x86_64-1.txt
+| | |-- sed-4.2.1-x86_64-1.txz
+| | |-- sed-4.2.1-x86_64-1.txz.asc
+| | |-- shadow-4.1.4.2-x86_64-3.txt
+| | |-- shadow-4.1.4.2-x86_64-3.txz
+| | |-- shadow-4.1.4.2-x86_64-3.txz.asc
| | |-- sharutils-4.7-x86_64-1.txt
| | |-- sharutils-4.7-x86_64-1.txz
| | |-- sharutils-4.7-x86_64-1.txz.asc
| | |-- slocate-3.1-x86_64-3.txt
| | |-- slocate-3.1-x86_64-3.txz
| | |-- slocate-3.1-x86_64-3.txz.asc
-| | |-- smartmontools-5.38-x86_64-1.txt
-| | |-- smartmontools-5.38-x86_64-1.txz
-| | |-- smartmontools-5.38-x86_64-1.txz.asc
+| | |-- smartmontools-5.39.1-x86_64-1.txt
+| | |-- smartmontools-5.39.1-x86_64-1.txz
+| | |-- smartmontools-5.39.1-x86_64-1.txz.asc
| | |-- splitvt-1.6.5-x86_64-1.txt
| | |-- splitvt-1.6.5-x86_64-1.txz
| | |-- splitvt-1.6.5-x86_64-1.txz.asc
@@ -894,22 +901,22 @@ see additional documentation files. | | |-- sysklogd-1.4.1-x86_64-10.txt
| | |-- sysklogd-1.4.1-x86_64-10.txz
| | |-- sysklogd-1.4.1-x86_64-10.txz.asc
-| | |-- syslinux-3.52-x86_64-1.txt
-| | |-- syslinux-3.52-x86_64-1.txz
-| | |-- syslinux-3.52-x86_64-1.txz.asc
+| | |-- syslinux-3.84-x86_64-2.txt
+| | |-- syslinux-3.84-x86_64-2.txz
+| | |-- syslinux-3.84-x86_64-2.txz.asc
| | |-- sysvinit-2.86-x86_64-6.txt
| | |-- sysvinit-2.86-x86_64-6.txz
| | |-- sysvinit-2.86-x86_64-6.txz.asc
| | |-- sysvinit-functions-8.53-x86_64-2.txt
| | |-- sysvinit-functions-8.53-x86_64-2.txz
| | |-- sysvinit-functions-8.53-x86_64-2.txz.asc
-| | |-- sysvinit-scripts-1.2-noarch-30.txt
-| | |-- sysvinit-scripts-1.2-noarch-30.txz
-| | |-- sysvinit-scripts-1.2-noarch-30.txz.asc
+| | |-- sysvinit-scripts-1.2-noarch-32.txt
+| | |-- sysvinit-scripts-1.2-noarch-32.txz
+| | |-- sysvinit-scripts-1.2-noarch-32.txz.asc
| | |-- tagfile
-| | |-- tar-1.22-x86_64-2.tgz
-| | |-- tar-1.22-x86_64-2.tgz.asc
-| | |-- tar-1.22-x86_64-2.txt
+| | |-- tar-1.23-x86_64-1.tgz
+| | |-- tar-1.23-x86_64-1.tgz.asc
+| | |-- tar-1.23-x86_64-1.txt
| | |-- tcsh-6.15.00-x86_64-1.txt
| | |-- tcsh-6.15.00-x86_64-1.txz
| | |-- tcsh-6.15.00-x86_64-1.txz.asc
@@ -919,30 +926,33 @@ see additional documentation files. | | |-- tree-1.5.2.2-x86_64-1.txt
| | |-- tree-1.5.2.2-x86_64-1.txz
| | |-- tree-1.5.2.2-x86_64-1.txz.asc
-| | |-- udev-141-x86_64-3.txt
-| | |-- udev-141-x86_64-3.txz
-| | |-- udev-141-x86_64-3.txz.asc
+| | |-- udev-153-x86_64-1.txt
+| | |-- udev-153-x86_64-1.txz
+| | |-- udev-153-x86_64-1.txz.asc
| | |-- unarj-265-x86_64-1.txt
| | |-- unarj-265-x86_64-1.txz
| | |-- unarj-265-x86_64-1.txz.asc
-| | |-- usbutils-0.82-x86_64-2.txt
-| | |-- usbutils-0.82-x86_64-2.txz
-| | |-- usbutils-0.82-x86_64-2.txz.asc
+| | |-- usb_modeswitch-1.1.2-x86_64-1.txt
+| | |-- usb_modeswitch-1.1.2-x86_64-1.txz
+| | |-- usb_modeswitch-1.1.2-x86_64-1.txz.asc
+| | |-- usbutils-0.87-x86_64-1.txt
+| | |-- usbutils-0.87-x86_64-1.txz
+| | |-- usbutils-0.87-x86_64-1.txz.asc
| | |-- utempter-1.1.4-x86_64-1.txt
| | |-- utempter-1.1.4-x86_64-1.txz
| | |-- utempter-1.1.4-x86_64-1.txz.asc
-| | |-- util-linux-ng-2.14.2-x86_64-2.txt
-| | |-- util-linux-ng-2.14.2-x86_64-2.txz
-| | |-- util-linux-ng-2.14.2-x86_64-2.txz.asc
+| | |-- util-linux-ng-2.17.2-x86_64-1.txt
+| | |-- util-linux-ng-2.17.2-x86_64-1.txz
+| | |-- util-linux-ng-2.17.2-x86_64-1.txz.asc
| | |-- which-2.20-x86_64-1.txt
| | |-- which-2.20-x86_64-1.txz
| | |-- which-2.20-x86_64-1.txz.asc
-| | |-- xfsprogs-3.0.1-x86_64-1.txt
-| | |-- xfsprogs-3.0.1-x86_64-1.txz
-| | |-- xfsprogs-3.0.1-x86_64-1.txz.asc
-| | |-- xz-4.999.8beta-x86_64-1.tgz
-| | |-- xz-4.999.8beta-x86_64-1.tgz.asc
-| | |-- xz-4.999.8beta-x86_64-1.txt
+| | |-- xfsprogs-3.1.1-x86_64-1.txt
+| | |-- xfsprogs-3.1.1-x86_64-1.txz
+| | |-- xfsprogs-3.1.1-x86_64-1.txz.asc
+| | |-- xz-4.999.9beta-x86_64-1.tgz
+| | |-- xz-4.999.9beta-x86_64-1.tgz.asc
+| | |-- xz-4.999.9beta-x86_64-1.txt
| | |-- zoo-2.10-x86_64-1.txt
| | |-- zoo-2.10-x86_64-1.txz
| | `-- zoo-2.10-x86_64-1.txz.asc
@@ -953,15 +963,15 @@ see additional documentation files. | | |-- acct-6.4pre1-x86_64-1.txt
| | |-- acct-6.4pre1-x86_64-1.txz
| | |-- acct-6.4pre1-x86_64-1.txz.asc
-| | |-- alsa-utils-1.0.18-x86_64-2.txt
-| | |-- alsa-utils-1.0.18-x86_64-2.txz
-| | |-- alsa-utils-1.0.18-x86_64-2.txz.asc
+| | |-- alsa-utils-1.0.23-x86_64-1.txt
+| | |-- alsa-utils-1.0.23-x86_64-1.txz
+| | |-- alsa-utils-1.0.23-x86_64-1.txz.asc
| | |-- amp-0.7.6-x86_64-1.txt
| | |-- amp-0.7.6-x86_64-1.txz
| | |-- amp-0.7.6-x86_64-1.txz.asc
-| | |-- ash-0.4.0-x86_64-1.txt
-| | |-- ash-0.4.0-x86_64-1.txz
-| | |-- ash-0.4.0-x86_64-1.txz.asc
+| | |-- ash-0.4.0-x86_64-2.txt
+| | |-- ash-0.4.0-x86_64-2.txz
+| | |-- ash-0.4.0-x86_64-2.txz.asc
| | |-- at-3.1.10-x86_64-1.txt
| | |-- at-3.1.10-x86_64-1.txz
| | |-- at-3.1.10-x86_64-1.txz.asc
@@ -980,21 +990,18 @@ see additional documentation files. | | |-- cdrdao-1.2.1-x86_64-1.txt
| | |-- cdrdao-1.2.1-x86_64-1.txz
| | |-- cdrdao-1.2.1-x86_64-1.txz.asc
-| | |-- cdrtools-2.01.01a57-x86_64-3.txt
-| | |-- cdrtools-2.01.01a57-x86_64-3.txz
-| | |-- cdrtools-2.01.01a57-x86_64-3.txz.asc
-| | |-- cupsddk-1.2.3-x86_64-1.txt
-| | |-- cupsddk-1.2.3-x86_64-1.txz
-| | |-- cupsddk-1.2.3-x86_64-1.txz.asc
+| | |-- cdrtools-2.01.01a78-x86_64-1.txt
+| | |-- cdrtools-2.01.01a78-x86_64-1.txz
+| | |-- cdrtools-2.01.01a78-x86_64-1.txz.asc
| | |-- dc3dd-6.12.3-x86_64-1.txt
| | |-- dc3dd-6.12.3-x86_64-1.txz
| | |-- dc3dd-6.12.3-x86_64-1.txz.asc
| | |-- diffstat-1.43-x86_64-1.txt
| | |-- diffstat-1.43-x86_64-1.txz
| | |-- diffstat-1.43-x86_64-1.txz.asc
-| | |-- diffutils-2.8.1-x86_64-3.txt
-| | |-- diffutils-2.8.1-x86_64-3.txz
-| | |-- diffutils-2.8.1-x86_64-3.txz.asc
+| | |-- diffutils-3.0-x86_64-1.txt
+| | |-- diffutils-3.0-x86_64-1.txz
+| | |-- diffutils-3.0-x86_64-1.txz.asc
| | |-- dmapi-2.2.10-x86_64-1.txt
| | |-- dmapi-2.2.10-x86_64-1.txz
| | |-- dmapi-2.2.10-x86_64-1.txz.asc
@@ -1010,35 +1017,35 @@ see additional documentation files. | | |-- flac-1.2.1-x86_64-2.txt
| | |-- flac-1.2.1-x86_64-2.txz
| | |-- flac-1.2.1-x86_64-2.txz.asc
-| | |-- foomatic-filters-4.0.2-x86_64-1.txt
-| | |-- foomatic-filters-4.0.2-x86_64-1.txz
-| | |-- foomatic-filters-4.0.2-x86_64-1.txz.asc
-| | |-- ghostscript-8.70-x86_64-1.txt
-| | |-- ghostscript-8.70-x86_64-1.txz
-| | |-- ghostscript-8.70-x86_64-1.txz.asc
+| | |-- foomatic-filters-4.0.4-x86_64-1.txt
+| | |-- foomatic-filters-4.0.4-x86_64-1.txz
+| | |-- foomatic-filters-4.0.4-x86_64-1.txz.asc
+| | |-- ghostscript-8.71-x86_64-2.txt
+| | |-- ghostscript-8.71-x86_64-2.txz
+| | |-- ghostscript-8.71-x86_64-2.txz.asc
| | |-- ghostscript-fonts-std-8.11-noarch-1.txt
| | |-- ghostscript-fonts-std-8.11-noarch-1.txz
| | |-- ghostscript-fonts-std-8.11-noarch-1.txz.asc
-| | |-- gphoto2-2.4.5-x86_64-1.txt
-| | |-- gphoto2-2.4.5-x86_64-1.txz
-| | |-- gphoto2-2.4.5-x86_64-1.txz.asc
+| | |-- gphoto2-2.4.9-x86_64-1.txt
+| | |-- gphoto2-2.4.9-x86_64-1.txz
+| | |-- gphoto2-2.4.9-x86_64-1.txz.asc
| | |-- groff-1.20.1-x86_64-1.txt
| | |-- groff-1.20.1-x86_64-1.txz
| | |-- groff-1.20.1-x86_64-1.txz.asc
-| | |-- gutenprint-5.2.4-x86_64-1.txt
-| | |-- gutenprint-5.2.4-x86_64-1.txz
-| | |-- gutenprint-5.2.4-x86_64-1.txz.asc
-| | |-- hplip-3.9.4b-x86_64-2.txt
-| | |-- hplip-3.9.4b-x86_64-2.txz
-| | |-- hplip-3.9.4b-x86_64-2.txz.asc
+| | |-- gutenprint-5.2.4-x86_64-2.txt
+| | |-- gutenprint-5.2.4-x86_64-2.txz
+| | |-- gutenprint-5.2.4-x86_64-2.txz.asc
+| | |-- hplip-3.10.2-x86_64-2.txt
+| | |-- hplip-3.10.2-x86_64-2.txz
+| | |-- hplip-3.10.2-x86_64-2.txz.asc
| | |-- install-packages
| | |-- install.end
| | |-- ispell-3.2.06-x86_64-1.txt
| | |-- ispell-3.2.06-x86_64-1.txz
| | |-- ispell-3.2.06-x86_64-1.txz.asc
-| | |-- jed-0.99_18-x86_64-3.txt
-| | |-- jed-0.99_18-x86_64-3.txz
-| | |-- jed-0.99_18-x86_64-3.txz.asc
+| | |-- jed-0.99_19-x86_64-1.txt
+| | |-- jed-0.99_19-x86_64-1.txz
+| | |-- jed-0.99_19-x86_64-1.txz.asc
| | |-- joe-3.5-x86_64-2.txt
| | |-- joe-3.5-x86_64-2.txz
| | |-- joe-3.5-x86_64-2.txz.asc
@@ -1051,15 +1058,15 @@ see additional documentation files. | | |-- libx86-1.1-x86_64-1.txt
| | |-- libx86-1.1-x86_64-1.txz
| | |-- libx86-1.1-x86_64-1.txz.asc
-| | |-- linuxdoc-tools-0.9.56-x86_64-5.txt
-| | |-- linuxdoc-tools-0.9.56-x86_64-5.txz
-| | |-- linuxdoc-tools-0.9.56-x86_64-5.txz.asc
-| | |-- lm_sensors-3.1.1-x86_64-1.txt
-| | |-- lm_sensors-3.1.1-x86_64-1.txz
-| | |-- lm_sensors-3.1.1-x86_64-1.txz.asc
-| | |-- lsof-4.78-x86_64-1.txt
-| | |-- lsof-4.78-x86_64-1.txz
-| | |-- lsof-4.78-x86_64-1.txz.asc
+| | |-- linuxdoc-tools-0.9.66-x86_64-2.txt
+| | |-- linuxdoc-tools-0.9.66-x86_64-2.txz
+| | |-- linuxdoc-tools-0.9.66-x86_64-2.txz.asc
+| | |-- lm_sensors-3.1.2-x86_64-1.txt
+| | |-- lm_sensors-3.1.2-x86_64-1.txz
+| | |-- lm_sensors-3.1.2-x86_64-1.txz.asc
+| | |-- lsof-4.83-x86_64-1.txt
+| | |-- lsof-4.83-x86_64-1.txz
+| | |-- lsof-4.83-x86_64-1.txz.asc
| | |-- lsscsi-0.22-x86_64-1.txt
| | |-- lsscsi-0.22-x86_64-1.txz
| | |-- lsscsi-0.22-x86_64-1.txz.asc
@@ -1071,42 +1078,45 @@ see additional documentation files. | | |-- man-1.6f-x86_64-2.txt
| | |-- man-1.6f-x86_64-2.txz
| | |-- man-1.6f-x86_64-2.txz.asc
-| | |-- man-pages-3.22-noarch-2.txt
-| | |-- man-pages-3.22-noarch-2.txz
-| | |-- man-pages-3.22-noarch-2.txz.asc
-| | |-- mc-20090714_git-x86_64-1.txt
-| | |-- mc-20090714_git-x86_64-1.txz
-| | |-- mc-20090714_git-x86_64-1.txz.asc
+| | |-- man-pages-3.24-noarch-1.txt
+| | |-- man-pages-3.24-noarch-1.txz
+| | |-- man-pages-3.24-noarch-1.txz.asc
+| | |-- mc-20100509_git-x86_64-1.txt
+| | |-- mc-20100509_git-x86_64-1.txz
+| | |-- mc-20100509_git-x86_64-1.txz.asc
| | |-- most-5.0.0a-x86_64-2.txt
| | |-- most-5.0.0a-x86_64-2.txz
| | |-- most-5.0.0a-x86_64-2.txz.asc
-| | |-- mpg321-0.2.10-x86_64-2.txt
-| | |-- mpg321-0.2.10-x86_64-2.txz
-| | |-- mpg321-0.2.10-x86_64-2.txz.asc
-| | |-- mysql-5.0.84-x86_64-1.txt
-| | |-- mysql-5.0.84-x86_64-1.txz
-| | |-- mysql-5.0.84-x86_64-1.txz.asc
-| | |-- nano-2.0.9-x86_64-2.txt
-| | |-- nano-2.0.9-x86_64-2.txz
-| | |-- nano-2.0.9-x86_64-2.txz.asc
+| | |-- mpg123-1.12.1-x86_64-1.txt
+| | |-- mpg123-1.12.1-x86_64-1.txz
+| | |-- mpg123-1.12.1-x86_64-1.txz.asc
+| | |-- mysql-5.1.46-x86_64-2.txt
+| | |-- mysql-5.1.46-x86_64-2.txz
+| | |-- mysql-5.1.46-x86_64-2.txz.asc
+| | |-- nano-2.2.4-x86_64-1.txt
+| | |-- nano-2.2.4-x86_64-1.txz
+| | |-- nano-2.2.4-x86_64-1.txz.asc
| | |-- normalize-0.7.7-x86_64-1.txt
| | |-- normalize-0.7.7-x86_64-1.txz
| | |-- normalize-0.7.7-x86_64-1.txz.asc
| | |-- ntfsprogs-2.0.0-x86_64-2.txt
| | |-- ntfsprogs-2.0.0-x86_64-2.txz
| | |-- ntfsprogs-2.0.0-x86_64-2.txz.asc
-| | |-- pm-utils-1.2.5-x86_64-1.txt
-| | |-- pm-utils-1.2.5-x86_64-1.txz
-| | |-- pm-utils-1.2.5-x86_64-1.txz.asc
-| | |-- radeontool-1.5-x86_64-1.txt
-| | |-- radeontool-1.5-x86_64-1.txz
-| | |-- radeontool-1.5-x86_64-1.txz.asc
+| | |-- pm-utils-1.3.0-x86_64-1.txt
+| | |-- pm-utils-1.3.0-x86_64-1.txz
+| | |-- pm-utils-1.3.0-x86_64-1.txz.asc
+| | |-- powertop-1.11-x86_64-1.txt
+| | |-- powertop-1.11-x86_64-1.txz
+| | |-- powertop-1.11-x86_64-1.txz.asc
+| | |-- radeontool-1.6.1-x86_64-1.txt
+| | |-- radeontool-1.6.1-x86_64-1.txz
+| | |-- radeontool-1.6.1-x86_64-1.txz.asc
| | |-- rexima-1.4-x86_64-2.txt
| | |-- rexima-1.4-x86_64-2.txz
| | |-- rexima-1.4-x86_64-2.txz.asc
-| | |-- rpm-4.7.0-x86_64-2.txt
-| | |-- rpm-4.7.0-x86_64-2.txz
-| | |-- rpm-4.7.0-x86_64-2.txz.asc
+| | |-- rpm-4.8.0-x86_64-1.txt
+| | |-- rpm-4.8.0-x86_64-1.txz
+| | |-- rpm-4.8.0-x86_64-1.txz.asc
| | |-- rzip-2.1-x86_64-1.txt
| | |-- rzip-2.1-x86_64-1.txz
| | |-- rzip-2.1-x86_64-1.txz.asc
@@ -1119,21 +1129,21 @@ see additional documentation files. | | |-- seejpeg-1.10-x86_64-1.txt
| | |-- seejpeg-1.10-x86_64-1.txz
| | |-- seejpeg-1.10-x86_64-1.txz.asc
-| | |-- slackpkg-2.80.2-noarch-3.tgz
-| | |-- slackpkg-2.80.2-noarch-3.tgz.asc
-| | |-- slackpkg-2.80.2-noarch-3.txt
-| | |-- sox-14.3.0-x86_64-1.txt
-| | |-- sox-14.3.0-x86_64-1.txz
-| | |-- sox-14.3.0-x86_64-1.txz.asc
-| | |-- sqlite-3.6.14.2-x86_64-1.txt
-| | |-- sqlite-3.6.14.2-x86_64-1.txz
-| | |-- sqlite-3.6.14.2-x86_64-1.txz.asc
-| | |-- sudo-1.6.8p12-x86_64-1.txt
-| | |-- sudo-1.6.8p12-x86_64-1.txz
-| | |-- sudo-1.6.8p12-x86_64-1.txz.asc
-| | |-- sysstat-7.0.0-x86_64-1.txt
-| | |-- sysstat-7.0.0-x86_64-1.txz
-| | |-- sysstat-7.0.0-x86_64-1.txz.asc
+| | |-- slackpkg-2.81.1-noarch-1.tgz
+| | |-- slackpkg-2.81.1-noarch-1.tgz.asc
+| | |-- slackpkg-2.81.1-noarch-1.txt
+| | |-- sox-14.3.0-x86_64-3.txt
+| | |-- sox-14.3.0-x86_64-3.txz
+| | |-- sox-14.3.0-x86_64-3.txz.asc
+| | |-- sqlite-3.6.23.1-x86_64-1.txt
+| | |-- sqlite-3.6.23.1-x86_64-1.txz
+| | |-- sqlite-3.6.23.1-x86_64-1.txz.asc
+| | |-- sudo-1.7.2p6-x86_64-1.txt
+| | |-- sudo-1.7.2p6-x86_64-1.txz
+| | |-- sudo-1.7.2p6-x86_64-1.txz.asc
+| | |-- sysstat-9.0.6.1-x86_64-1.txt
+| | |-- sysstat-9.0.6.1-x86_64-1.txz
+| | |-- sysstat-9.0.6.1-x86_64-1.txz.asc
| | |-- tagfile
| | |-- texinfo-4.13a-x86_64-3.txt
| | |-- texinfo-4.13a-x86_64-3.txz
@@ -1141,46 +1151,46 @@ see additional documentation files. | | |-- vbetool-1.1-x86_64-1.txt
| | |-- vbetool-1.1-x86_64-1.txz
| | |-- vbetool-1.1-x86_64-1.txz.asc
-| | |-- vim-7.2.245-x86_64-1.txt
-| | |-- vim-7.2.245-x86_64-1.txz
-| | |-- vim-7.2.245-x86_64-1.txz.asc
+| | |-- vim-7.2.416-x86_64-1.txt
+| | |-- vim-7.2.416-x86_64-1.txz
+| | |-- vim-7.2.416-x86_64-1.txz.asc
| | |-- vorbis-tools-1.2.0-x86_64-1.txt
| | |-- vorbis-tools-1.2.0-x86_64-1.txz
| | |-- vorbis-tools-1.2.0-x86_64-1.txz.asc
| | |-- workbone-2.40-x86_64-3.txt
| | |-- workbone-2.40-x86_64-3.txz
| | |-- workbone-2.40-x86_64-3.txz.asc
-| | |-- xfsdump-3.0.1-x86_64-1.txt
-| | |-- xfsdump-3.0.1-x86_64-1.txz
-| | |-- xfsdump-3.0.1-x86_64-1.txz.asc
+| | |-- xfsdump-3.0.4-x86_64-1.txt
+| | |-- xfsdump-3.0.4-x86_64-1.txz
+| | |-- xfsdump-3.0.4-x86_64-1.txz.asc
| | |-- zsh-4.3.10-x86_64-1.txt
| | |-- zsh-4.3.10-x86_64-1.txz
| | `-- zsh-4.3.10-x86_64-1.txz.asc
| |-- d
-| | |-- autoconf-2.63-noarch-1.txt
-| | |-- autoconf-2.63-noarch-1.txz
-| | |-- autoconf-2.63-noarch-1.txz.asc
-| | |-- automake-1.10.1-noarch-1.txt
-| | |-- automake-1.10.1-noarch-1.txz
-| | |-- automake-1.10.1-noarch-1.txz.asc
-| | |-- binutils-2.18.50.0.9-x86_64-2.txt
-| | |-- binutils-2.18.50.0.9-x86_64-2.txz
-| | |-- binutils-2.18.50.0.9-x86_64-2.txz.asc
-| | |-- bison-2.4.1-x86_64-1.txt
-| | |-- bison-2.4.1-x86_64-1.txz
-| | |-- bison-2.4.1-x86_64-1.txz.asc
+| | |-- autoconf-2.65-noarch-1.txt
+| | |-- autoconf-2.65-noarch-1.txz
+| | |-- autoconf-2.65-noarch-1.txz.asc
+| | |-- automake-1.11.1-noarch-1.txt
+| | |-- automake-1.11.1-noarch-1.txz
+| | |-- automake-1.11.1-noarch-1.txz.asc
+| | |-- binutils-2.20.51.0.8-x86_64-1.txt
+| | |-- binutils-2.20.51.0.8-x86_64-1.txz
+| | |-- binutils-2.20.51.0.8-x86_64-1.txz.asc
+| | |-- bison-2.4.2-x86_64-1.txt
+| | |-- bison-2.4.2-x86_64-1.txz
+| | |-- bison-2.4.2-x86_64-1.txz.asc
| | |-- ccache-2.4-x86_64-1.txt
| | |-- ccache-2.4-x86_64-1.txz
| | |-- ccache-2.4-x86_64-1.txz.asc
-| | |-- clisp-2.47-x86_64-2.txt
-| | |-- clisp-2.47-x86_64-2.txz
-| | |-- clisp-2.47-x86_64-2.txz.asc
-| | |-- cmake-2.6.2-x86_64-2.txt
-| | |-- cmake-2.6.2-x86_64-2.txz
-| | |-- cmake-2.6.2-x86_64-2.txz.asc
-| | |-- cscope-15.6-x86_64-2.txt
-| | |-- cscope-15.6-x86_64-2.txz
-| | |-- cscope-15.6-x86_64-2.txz.asc
+| | |-- clisp-2.48-x86_64-1.txt
+| | |-- clisp-2.48-x86_64-1.txz
+| | |-- clisp-2.48-x86_64-1.txz.asc
+| | |-- cmake-2.8.1-x86_64-1.txt
+| | |-- cmake-2.8.1-x86_64-1.txz
+| | |-- cmake-2.8.1-x86_64-1.txz.asc
+| | |-- cscope-15.7a-x86_64-1.txt
+| | |-- cscope-15.7a-x86_64-1.txz
+| | |-- cscope-15.7a-x86_64-1.txz.asc
| | |-- cvs-1.11.23-x86_64-1.txt
| | |-- cvs-1.11.23-x86_64-1.txz
| | |-- cvs-1.11.23-x86_64-1.txz.asc
@@ -1190,111 +1200,111 @@ see additional documentation files. | | |-- distcc-2.18.3-x86_64-2.txt
| | |-- distcc-2.18.3-x86_64-2.txz
| | |-- distcc-2.18.3-x86_64-2.txz.asc
-| | |-- doxygen-1.5.8-x86_64-1.txt
-| | |-- doxygen-1.5.8-x86_64-1.txz
-| | |-- doxygen-1.5.8-x86_64-1.txz.asc
+| | |-- doxygen-1.6.3-x86_64-1.txt
+| | |-- doxygen-1.6.3-x86_64-1.txz
+| | |-- doxygen-1.6.3-x86_64-1.txz.asc
| | |-- flex-2.5.35-x86_64-1.txt
| | |-- flex-2.5.35-x86_64-1.txz
| | |-- flex-2.5.35-x86_64-1.txz.asc
-| | |-- gcc-4.3.3-x86_64-4.txt
-| | |-- gcc-4.3.3-x86_64-4.txz
-| | |-- gcc-4.3.3-x86_64-4.txz.asc
-| | |-- gcc-g++-4.3.3-x86_64-4.txt
-| | |-- gcc-g++-4.3.3-x86_64-4.txz
-| | |-- gcc-g++-4.3.3-x86_64-4.txz.asc
-| | |-- gcc-gfortran-4.3.3-x86_64-4.txt
-| | |-- gcc-gfortran-4.3.3-x86_64-4.txz
-| | |-- gcc-gfortran-4.3.3-x86_64-4.txz.asc
-| | |-- gcc-gnat-4.3.3-x86_64-4.txt
-| | |-- gcc-gnat-4.3.3-x86_64-4.txz
-| | |-- gcc-gnat-4.3.3-x86_64-4.txz.asc
-| | |-- gcc-java-4.3.3-x86_64-4.txt
-| | |-- gcc-java-4.3.3-x86_64-4.txz
-| | |-- gcc-java-4.3.3-x86_64-4.txz.asc
-| | |-- gcc-objc-4.3.3-x86_64-4.txt
-| | |-- gcc-objc-4.3.3-x86_64-4.txz
-| | |-- gcc-objc-4.3.3-x86_64-4.txz.asc
-| | |-- gdb-6.8-x86_64-2.txt
-| | |-- gdb-6.8-x86_64-2.txz
-| | |-- gdb-6.8-x86_64-2.txz.asc
-| | |-- gettext-tools-0.17-x86_64-3.txt
-| | |-- gettext-tools-0.17-x86_64-3.txz
-| | |-- gettext-tools-0.17-x86_64-3.txz.asc
-| | |-- git-1.6.4-x86_64-1.txt
-| | |-- git-1.6.4-x86_64-1.txz
-| | |-- git-1.6.4-x86_64-1.txz.asc
+| | |-- gcc-4.4.4-x86_64-1.txt
+| | |-- gcc-4.4.4-x86_64-1.txz
+| | |-- gcc-4.4.4-x86_64-1.txz.asc
+| | |-- gcc-g++-4.4.4-x86_64-1.txt
+| | |-- gcc-g++-4.4.4-x86_64-1.txz
+| | |-- gcc-g++-4.4.4-x86_64-1.txz.asc
+| | |-- gcc-gfortran-4.4.4-x86_64-1.txt
+| | |-- gcc-gfortran-4.4.4-x86_64-1.txz
+| | |-- gcc-gfortran-4.4.4-x86_64-1.txz.asc
+| | |-- gcc-gnat-4.4.4-x86_64-1.txt
+| | |-- gcc-gnat-4.4.4-x86_64-1.txz
+| | |-- gcc-gnat-4.4.4-x86_64-1.txz.asc
+| | |-- gcc-java-4.4.4-x86_64-1.txt
+| | |-- gcc-java-4.4.4-x86_64-1.txz
+| | |-- gcc-java-4.4.4-x86_64-1.txz.asc
+| | |-- gcc-objc-4.4.4-x86_64-1.txt
+| | |-- gcc-objc-4.4.4-x86_64-1.txz
+| | |-- gcc-objc-4.4.4-x86_64-1.txz.asc
+| | |-- gdb-7.1-x86_64-1.txt
+| | |-- gdb-7.1-x86_64-1.txz
+| | |-- gdb-7.1-x86_64-1.txz.asc
+| | |-- gettext-tools-0.17-x86_64-4.txt
+| | |-- gettext-tools-0.17-x86_64-4.txz
+| | |-- gettext-tools-0.17-x86_64-4.txz.asc
+| | |-- git-1.7.1-x86_64-1.txt
+| | |-- git-1.7.1-x86_64-1.txz
+| | |-- git-1.7.1-x86_64-1.txz.asc
| | |-- gperf-3.0.3-x86_64-1.txt
| | |-- gperf-3.0.3-x86_64-1.txz
| | |-- gperf-3.0.3-x86_64-1.txz.asc
-| | |-- guile-1.8.7-x86_64-1.txt
-| | |-- guile-1.8.7-x86_64-1.txz
-| | |-- guile-1.8.7-x86_64-1.txz.asc
+| | |-- guile-1.8.7-x86_64-3.txt
+| | |-- guile-1.8.7-x86_64-3.txz
+| | |-- guile-1.8.7-x86_64-3.txz.asc
| | |-- indent-2.2.10-x86_64-1.txt
| | |-- indent-2.2.10-x86_64-1.txz
| | |-- indent-2.2.10-x86_64-1.txz.asc
| | |-- install-packages
| | |-- install.end
-| | |-- intltool-0.40.5-x86_64-1.txt
-| | |-- intltool-0.40.5-x86_64-1.txz
-| | |-- intltool-0.40.5-x86_64-1.txz.asc
-| | |-- kernel-headers-2.6.29.6-x86-2.txt
-| | |-- kernel-headers-2.6.29.6-x86-2.txz
-| | |-- kernel-headers-2.6.29.6-x86-2.txz.asc
-| | |-- libtool-1.5.26-x86_64-1.txt
-| | |-- libtool-1.5.26-x86_64-1.txz
-| | |-- libtool-1.5.26-x86_64-1.txz.asc
-| | |-- m4-1.4.13-x86_64-1.txt
-| | |-- m4-1.4.13-x86_64-1.txz
-| | |-- m4-1.4.13-x86_64-1.txz.asc
+| | |-- intltool-0.40.6-x86_64-1.txt
+| | |-- intltool-0.40.6-x86_64-1.txz
+| | |-- intltool-0.40.6-x86_64-1.txz.asc
+| | |-- kernel-headers-2.6.33.4-x86-1.txt
+| | |-- kernel-headers-2.6.33.4-x86-1.txz
+| | |-- kernel-headers-2.6.33.4-x86-1.txz.asc
+| | |-- libtool-2.2.6b-x86_64-2.txt
+| | |-- libtool-2.2.6b-x86_64-2.txz
+| | |-- libtool-2.2.6b-x86_64-2.txz.asc
+| | |-- m4-1.4.14-x86_64-1.txt
+| | |-- m4-1.4.14-x86_64-1.txz
+| | |-- m4-1.4.14-x86_64-1.txz.asc
| | |-- make-3.81-x86_64-1.txt
| | |-- make-3.81-x86_64-1.txz
| | |-- make-3.81-x86_64-1.txz.asc
| | |-- maketag
| | |-- maketag.ez
-| | |-- mercurial-1.2.1-x86_64-1.txt
-| | |-- mercurial-1.2.1-x86_64-1.txz
-| | |-- mercurial-1.2.1-x86_64-1.txz.asc
-| | |-- nasm-2.05.01-x86_64-1.txt
-| | |-- nasm-2.05.01-x86_64-1.txz
-| | |-- nasm-2.05.01-x86_64-1.txz.asc
-| | |-- oprofile-0.9.4-x86_64-2.txt
-| | |-- oprofile-0.9.4-x86_64-2.txz
-| | |-- oprofile-0.9.4-x86_64-2.txz.asc
+| | |-- mercurial-1.5.2-x86_64-1.txt
+| | |-- mercurial-1.5.2-x86_64-1.txz
+| | |-- mercurial-1.5.2-x86_64-1.txz.asc
+| | |-- nasm-2.07-x86_64-1.txt
+| | |-- nasm-2.07-x86_64-1.txz
+| | |-- nasm-2.07-x86_64-1.txz.asc
+| | |-- oprofile-0.9.6-x86_64-2.txt
+| | |-- oprofile-0.9.6-x86_64-2.txz
+| | |-- oprofile-0.9.6-x86_64-2.txz.asc
| | |-- p2c-1.21alpha2-x86_64-3.txt
| | |-- p2c-1.21alpha2-x86_64-3.txz
| | |-- p2c-1.21alpha2-x86_64-3.txz.asc
-| | |-- perl-5.10.0-x86_64-2.txt
-| | |-- perl-5.10.0-x86_64-2.txz
-| | |-- perl-5.10.0-x86_64-2.txz.asc
+| | |-- perl-5.10.1-x86_64-1.txt
+| | |-- perl-5.10.1-x86_64-1.txz
+| | |-- perl-5.10.1-x86_64-1.txz.asc
| | |-- pkg-config-0.23-x86_64-3.txt
| | |-- pkg-config-0.23-x86_64-3.txz
| | |-- pkg-config-0.23-x86_64-3.txz.asc
| | |-- pmake-1.111-x86_64-3.txt
| | |-- pmake-1.111-x86_64-3.txz
| | |-- pmake-1.111-x86_64-3.txz.asc
-| | |-- python-2.6.2-x86_64-3.txt
-| | |-- python-2.6.2-x86_64-3.txz
-| | |-- python-2.6.2-x86_64-3.txz.asc
+| | |-- python-2.6.4-x86_64-1.txt
+| | |-- python-2.6.4-x86_64-1.txz
+| | |-- python-2.6.4-x86_64-1.txz.asc
| | |-- rcs-5.7-x86_64-2.txt
| | |-- rcs-5.7-x86_64-2.txz
| | |-- rcs-5.7-x86_64-2.txz.asc
-| | |-- ruby-1.8.7_p174-x86_64-1.txt
-| | |-- ruby-1.8.7_p174-x86_64-1.txz
-| | |-- ruby-1.8.7_p174-x86_64-1.txz.asc
+| | |-- ruby-1.9.1_p378-x86_64-1.txt
+| | |-- ruby-1.9.1_p378-x86_64-1.txz
+| | |-- ruby-1.9.1_p378-x86_64-1.txz.asc
| | |-- strace-4.5.18-x86_64-1.txt
| | |-- strace-4.5.18-x86_64-1.txz
| | |-- strace-4.5.18-x86_64-1.txz.asc
-| | |-- subversion-1.6.4-x86_64-1.txt
-| | |-- subversion-1.6.4-x86_64-1.txz
-| | |-- subversion-1.6.4-x86_64-1.txz.asc
+| | |-- subversion-1.6.11-x86_64-1.txt
+| | |-- subversion-1.6.11-x86_64-1.txz
+| | |-- subversion-1.6.11-x86_64-1.txz.asc
| | |-- swig-1.3.38-x86_64-1.txt
| | |-- swig-1.3.38-x86_64-1.txz
| | |-- swig-1.3.38-x86_64-1.txz.asc
| | `-- tagfile
| |-- e
-| | |-- emacs-22.3-x86_64-3.txt
-| | |-- emacs-22.3-x86_64-3.txz
-| | |-- emacs-22.3-x86_64-3.txz.asc
+| | |-- emacs-23.2-x86_64-1.txt
+| | |-- emacs-23.2-x86_64-1.txz
+| | |-- emacs-23.2-x86_64-1.txz.asc
| | |-- install-packages
| | |-- install.end
| | |-- maketag
@@ -1306,427 +1316,451 @@ see additional documentation files. | | |-- linux-faqs-20060228-noarch-1.txt
| | |-- linux-faqs-20060228-noarch-1.txz
| | |-- linux-faqs-20060228-noarch-1.txz.asc
-| | |-- linux-howtos-20090805-noarch-1.txt
-| | |-- linux-howtos-20090805-noarch-1.txz
-| | |-- linux-howtos-20090805-noarch-1.txz.asc
+| | |-- linux-howtos-20100501-noarch-1.txt
+| | |-- linux-howtos-20100501-noarch-1.txz
+| | |-- linux-howtos-20100501-noarch-1.txz.asc
| | |-- maketag
| | |-- maketag.ez
| | `-- tagfile
| |-- k
| | |-- install-packages
| | |-- install.end
-| | |-- kernel-source-2.6.29.6-noarch-2.txt
-| | |-- kernel-source-2.6.29.6-noarch-2.txz
-| | |-- kernel-source-2.6.29.6-noarch-2.txz.asc
+| | |-- kernel-source-2.6.33.4-noarch-1.txt
+| | |-- kernel-source-2.6.33.4-noarch-1.txz
+| | |-- kernel-source-2.6.33.4-noarch-1.txz.asc
| | |-- maketag
| | |-- maketag.ez
| | `-- tagfile
| |-- kde
-| | |-- amarok-2.1.1-x86_64-1.txt
-| | |-- amarok-2.1.1-x86_64-1.txz
-| | |-- amarok-2.1.1-x86_64-1.txz.asc
-| | |-- guidance-power-manager-4.2.4-x86_64-1.txt
-| | |-- guidance-power-manager-4.2.4-x86_64-1.txz
-| | |-- guidance-power-manager-4.2.4-x86_64-1.txz.asc
+| | |-- amarok-2.3.0-x86_64-1.txt
+| | |-- amarok-2.3.0-x86_64-1.txz
+| | |-- amarok-2.3.0-x86_64-1.txz.asc
+| | |-- guidance-power-manager-4.4.0-x86_64-1.txt
+| | |-- guidance-power-manager-4.4.0-x86_64-1.txz
+| | |-- guidance-power-manager-4.4.0-x86_64-1.txz.asc
| | |-- install-packages
| | |-- install.end
-| | |-- k3b-r948463-x86_64-1.txt
-| | |-- k3b-r948463-x86_64-1.txz
-| | |-- k3b-r948463-x86_64-1.txz.asc
-| | |-- kaudiocreator-r1008583-x86_64-1.txt
-| | |-- kaudiocreator-r1008583-x86_64-1.txz
-| | |-- kaudiocreator-r1008583-x86_64-1.txz.asc
-| | |-- kdeaccessibility-4.2.4-x86_64-1.txt
-| | |-- kdeaccessibility-4.2.4-x86_64-1.txz
-| | |-- kdeaccessibility-4.2.4-x86_64-1.txz.asc
-| | |-- kdeadmin-4.2.4-x86_64-1.txt
-| | |-- kdeadmin-4.2.4-x86_64-1.txz
-| | |-- kdeadmin-4.2.4-x86_64-1.txz.asc
-| | |-- kdeartwork-4.2.4-x86_64-1.txt
-| | |-- kdeartwork-4.2.4-x86_64-1.txz
-| | |-- kdeartwork-4.2.4-x86_64-1.txz.asc
-| | |-- kdebase-4.2.4-x86_64-1.txt
-| | |-- kdebase-4.2.4-x86_64-1.txz
-| | |-- kdebase-4.2.4-x86_64-1.txz.asc
-| | |-- kdebase-runtime-4.2.4-x86_64-2.txt
-| | |-- kdebase-runtime-4.2.4-x86_64-2.txz
-| | |-- kdebase-runtime-4.2.4-x86_64-2.txz.asc
-| | |-- kdebase-workspace-4.2.4-x86_64-1.txt
-| | |-- kdebase-workspace-4.2.4-x86_64-1.txz
-| | |-- kdebase-workspace-4.2.4-x86_64-1.txz.asc
-| | |-- kdebindings-4.2.4-x86_64-1.txt
-| | |-- kdebindings-4.2.4-x86_64-1.txz
-| | |-- kdebindings-4.2.4-x86_64-1.txz.asc
-| | |-- kdeedu-4.2.4-x86_64-1.txt
-| | |-- kdeedu-4.2.4-x86_64-1.txz
-| | |-- kdeedu-4.2.4-x86_64-1.txz.asc
-| | |-- kdegames-4.2.4-x86_64-1.txt
-| | |-- kdegames-4.2.4-x86_64-1.txz
-| | |-- kdegames-4.2.4-x86_64-1.txz.asc
-| | |-- kdegraphics-4.2.4-x86_64-1.txt
-| | |-- kdegraphics-4.2.4-x86_64-1.txz
-| | |-- kdegraphics-4.2.4-x86_64-1.txz.asc
-| | |-- kdelibs-4.2.4-x86_64-3.txt
-| | |-- kdelibs-4.2.4-x86_64-3.txz
-| | |-- kdelibs-4.2.4-x86_64-3.txz.asc
-| | |-- kdemultimedia-4.2.4-x86_64-1.txt
-| | |-- kdemultimedia-4.2.4-x86_64-1.txz
-| | |-- kdemultimedia-4.2.4-x86_64-1.txz.asc
-| | |-- kdenetwork-4.2.4-x86_64-2.txt
-| | |-- kdenetwork-4.2.4-x86_64-2.txz
-| | |-- kdenetwork-4.2.4-x86_64-2.txz.asc
-| | |-- kdepim-4.2.4-x86_64-1.txt
-| | |-- kdepim-4.2.4-x86_64-1.txz
-| | |-- kdepim-4.2.4-x86_64-1.txz.asc
-| | |-- kdepimlibs-4.2.4-x86_64-1.txt
-| | |-- kdepimlibs-4.2.4-x86_64-1.txz
-| | |-- kdepimlibs-4.2.4-x86_64-1.txz.asc
-| | |-- kdeplasma-addons-4.2.4-x86_64-1.txt
-| | |-- kdeplasma-addons-4.2.4-x86_64-1.txz
-| | |-- kdeplasma-addons-4.2.4-x86_64-1.txz.asc
-| | |-- kdesdk-4.2.4-x86_64-1.txt
-| | |-- kdesdk-4.2.4-x86_64-1.txz
-| | |-- kdesdk-4.2.4-x86_64-1.txz.asc
-| | |-- kdetoys-4.2.4-x86_64-1.txt
-| | |-- kdetoys-4.2.4-x86_64-1.txz
-| | |-- kdetoys-4.2.4-x86_64-1.txz.asc
-| | |-- kdeutils-4.2.4-x86_64-1.txt
-| | |-- kdeutils-4.2.4-x86_64-1.txz
-| | |-- kdeutils-4.2.4-x86_64-1.txz.asc
-| | |-- kdevelop-3.9.91-x86_64-1.txt
-| | |-- kdevelop-3.9.91-x86_64-1.txz
-| | |-- kdevelop-3.9.91-x86_64-1.txz.asc
-| | |-- kdevplatform-0.9.91-x86_64-1.txt
-| | |-- kdevplatform-0.9.91-x86_64-1.txz
-| | |-- kdevplatform-0.9.91-x86_64-1.txz.asc
-| | |-- kdewebdev-4.2.4-x86_64-1.txt
-| | |-- kdewebdev-4.2.4-x86_64-1.txz
-| | |-- kdewebdev-4.2.4-x86_64-1.txz.asc
-| | |-- koffice-2.0.2-x86_64-1.txt
-| | |-- koffice-2.0.2-x86_64-1.txz
-| | |-- koffice-2.0.2-x86_64-1.txz.asc
-| | |-- konq-plugins-4.2.4-x86_64-1.txt
-| | |-- konq-plugins-4.2.4-x86_64-1.txz
-| | |-- konq-plugins-4.2.4-x86_64-1.txz.asc
-| | |-- ktorrent-3.2.2-x86_64-1.txt
-| | |-- ktorrent-3.2.2-x86_64-1.txz
-| | |-- ktorrent-3.2.2-x86_64-1.txz.asc
+| | |-- k3b-1.91.0-x86_64-3.txt
+| | |-- k3b-1.91.0-x86_64-3.txz
+| | |-- k3b-1.91.0-x86_64-3.txz.asc
+| | |-- kaudiocreator-r1118889-x86_64-1.txt
+| | |-- kaudiocreator-r1118889-x86_64-1.txz
+| | |-- kaudiocreator-r1118889-x86_64-1.txz.asc
+| | |-- kdeaccessibility-4.4.3-x86_64-1.txt
+| | |-- kdeaccessibility-4.4.3-x86_64-1.txz
+| | |-- kdeaccessibility-4.4.3-x86_64-1.txz.asc
+| | |-- kdeadmin-4.4.3-x86_64-1.txt
+| | |-- kdeadmin-4.4.3-x86_64-1.txz
+| | |-- kdeadmin-4.4.3-x86_64-1.txz.asc
+| | |-- kdeartwork-4.4.3-x86_64-1.txt
+| | |-- kdeartwork-4.4.3-x86_64-1.txz
+| | |-- kdeartwork-4.4.3-x86_64-1.txz.asc
+| | |-- kdebase-4.4.3-x86_64-1.txt
+| | |-- kdebase-4.4.3-x86_64-1.txz
+| | |-- kdebase-4.4.3-x86_64-1.txz.asc
+| | |-- kdebase-runtime-4.4.3-x86_64-1.txt
+| | |-- kdebase-runtime-4.4.3-x86_64-1.txz
+| | |-- kdebase-runtime-4.4.3-x86_64-1.txz.asc
+| | |-- kdebase-workspace-4.4.3-x86_64-1.txt
+| | |-- kdebase-workspace-4.4.3-x86_64-1.txz
+| | |-- kdebase-workspace-4.4.3-x86_64-1.txz.asc
+| | |-- kdebindings-4.4.3-x86_64-2.txt
+| | |-- kdebindings-4.4.3-x86_64-2.txz
+| | |-- kdebindings-4.4.3-x86_64-2.txz.asc
+| | |-- kdeedu-4.4.3-x86_64-1.txt
+| | |-- kdeedu-4.4.3-x86_64-1.txz
+| | |-- kdeedu-4.4.3-x86_64-1.txz.asc
+| | |-- kdegames-4.4.3-x86_64-1.txt
+| | |-- kdegames-4.4.3-x86_64-1.txz
+| | |-- kdegames-4.4.3-x86_64-1.txz.asc
+| | |-- kdegraphics-4.4.3-x86_64-2.txt
+| | |-- kdegraphics-4.4.3-x86_64-2.txz
+| | |-- kdegraphics-4.4.3-x86_64-2.txz.asc
+| | |-- kdelibs-4.4.3-x86_64-1.txt
+| | |-- kdelibs-4.4.3-x86_64-1.txz
+| | |-- kdelibs-4.4.3-x86_64-1.txz.asc
+| | |-- kdemultimedia-4.4.3-x86_64-1.txt
+| | |-- kdemultimedia-4.4.3-x86_64-1.txz
+| | |-- kdemultimedia-4.4.3-x86_64-1.txz.asc
+| | |-- kdenetwork-4.4.3-x86_64-2.txt
+| | |-- kdenetwork-4.4.3-x86_64-2.txz
+| | |-- kdenetwork-4.4.3-x86_64-2.txz.asc
+| | |-- kdepim-4.4.3-x86_64-1.txt
+| | |-- kdepim-4.4.3-x86_64-1.txz
+| | |-- kdepim-4.4.3-x86_64-1.txz.asc
+| | |-- kdepim-runtime-4.4.3-x86_64-1.txt
+| | |-- kdepim-runtime-4.4.3-x86_64-1.txz
+| | |-- kdepim-runtime-4.4.3-x86_64-1.txz.asc
+| | |-- kdepimlibs-4.4.3-x86_64-1.txt
+| | |-- kdepimlibs-4.4.3-x86_64-1.txz
+| | |-- kdepimlibs-4.4.3-x86_64-1.txz.asc
+| | |-- kdeplasma-addons-4.4.3-x86_64-1.txt
+| | |-- kdeplasma-addons-4.4.3-x86_64-1.txz
+| | |-- kdeplasma-addons-4.4.3-x86_64-1.txz.asc
+| | |-- kdesdk-4.4.3-x86_64-1.txt
+| | |-- kdesdk-4.4.3-x86_64-1.txz
+| | |-- kdesdk-4.4.3-x86_64-1.txz.asc
+| | |-- kdetoys-4.4.3-x86_64-1.txt
+| | |-- kdetoys-4.4.3-x86_64-1.txz
+| | |-- kdetoys-4.4.3-x86_64-1.txz.asc
+| | |-- kdeutils-4.4.3-x86_64-1.txt
+| | |-- kdeutils-4.4.3-x86_64-1.txz
+| | |-- kdeutils-4.4.3-x86_64-1.txz.asc
+| | |-- kdevelop-4.0.0-x86_64-1.txt
+| | |-- kdevelop-4.0.0-x86_64-1.txz
+| | |-- kdevelop-4.0.0-x86_64-1.txz.asc
+| | |-- kdevplatform-1.0.0-x86_64-1.txt
+| | |-- kdevplatform-1.0.0-x86_64-1.txz
+| | |-- kdevplatform-1.0.0-x86_64-1.txz.asc
+| | |-- kdewebdev-4.4.3-x86_64-1.txt
+| | |-- kdewebdev-4.4.3-x86_64-1.txz
+| | |-- kdewebdev-4.4.3-x86_64-1.txz.asc
+| | |-- koffice-2.1.2-x86_64-2.txt
+| | |-- koffice-2.1.2-x86_64-2.txz
+| | |-- koffice-2.1.2-x86_64-2.txz.asc
+| | |-- konq-plugins-4.4.0-x86_64-1.txt
+| | |-- konq-plugins-4.4.0-x86_64-1.txz
+| | |-- konq-plugins-4.4.0-x86_64-1.txz.asc
+| | |-- kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txt
+| | |-- kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz
+| | |-- kopete-cryptography-1.3.0_kde4.4.0-x86_64-1.txz.asc
+| | |-- ktorrent-3.3.4-x86_64-1.txt
+| | |-- ktorrent-3.3.4-x86_64-1.txz
+| | |-- ktorrent-3.3.4-x86_64-1.txz.asc
| | |-- maketag
| | |-- maketag.ez
-| | |-- mplayerthumbs-1.2-x86_64-2.txt
-| | |-- mplayerthumbs-1.2-x86_64-2.txz
-| | |-- mplayerthumbs-1.2-x86_64-2.txz.asc
-| | |-- skanlite-0.3_kde4.2.4-x86_64-1.txt
-| | |-- skanlite-0.3_kde4.2.4-x86_64-1.txz
-| | |-- skanlite-0.3_kde4.2.4-x86_64-1.txz.asc
+| | |-- oxygen-icons-4.4.3-x86_64-1.txt
+| | |-- oxygen-icons-4.4.3-x86_64-1.txz
+| | |-- oxygen-icons-4.4.3-x86_64-1.txz.asc
+| | |-- polkit-kde-1-r1120537-x86_64-1.txt
+| | |-- polkit-kde-1-r1120537-x86_64-1.txz
+| | |-- polkit-kde-1-r1120537-x86_64-1.txz.asc
+| | |-- polkit-qt-1-r1118744-x86_64-1.txt
+| | |-- polkit-qt-1-r1118744-x86_64-1.txz
+| | |-- polkit-qt-1-r1118744-x86_64-1.txz.asc
+| | |-- skanlite-0.4_kde4.4.0-x86_64-1.txt
+| | |-- skanlite-0.4_kde4.4.0-x86_64-1.txz
+| | |-- skanlite-0.4_kde4.4.0-x86_64-1.txz.asc
| | `-- tagfile
| |-- kdei
| | |-- install-packages
| | |-- install.end
-| | |-- kde-l10n-ar-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ar-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ar-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-bg-4.2.4-noarch-1.txt
-| | |-- kde-l10n-bg-4.2.4-noarch-1.txz
-| | |-- kde-l10n-bg-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-bn_IN-4.2.4-noarch-1.txt
-| | |-- kde-l10n-bn_IN-4.2.4-noarch-1.txz
-| | |-- kde-l10n-bn_IN-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-ca-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ca-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ca-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-cs-4.2.4-noarch-1.txt
-| | |-- kde-l10n-cs-4.2.4-noarch-1.txz
-| | |-- kde-l10n-cs-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-csb-4.2.4-noarch-1.txt
-| | |-- kde-l10n-csb-4.2.4-noarch-1.txz
-| | |-- kde-l10n-csb-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-da-4.2.4-noarch-1.txt
-| | |-- kde-l10n-da-4.2.4-noarch-1.txz
-| | |-- kde-l10n-da-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-de-4.2.4-noarch-1.txt
-| | |-- kde-l10n-de-4.2.4-noarch-1.txz
-| | |-- kde-l10n-de-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-el-4.2.4-noarch-1.txt
-| | |-- kde-l10n-el-4.2.4-noarch-1.txz
-| | |-- kde-l10n-el-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-en_GB-4.2.4-noarch-1.txt
-| | |-- kde-l10n-en_GB-4.2.4-noarch-1.txz
-| | |-- kde-l10n-en_GB-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-es-4.2.4-noarch-1.txt
-| | |-- kde-l10n-es-4.2.4-noarch-1.txz
-| | |-- kde-l10n-es-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-et-4.2.4-noarch-1.txt
-| | |-- kde-l10n-et-4.2.4-noarch-1.txz
-| | |-- kde-l10n-et-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-eu-4.2.4-noarch-1.txt
-| | |-- kde-l10n-eu-4.2.4-noarch-1.txz
-| | |-- kde-l10n-eu-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-fi-4.2.4-noarch-1.txt
-| | |-- kde-l10n-fi-4.2.4-noarch-1.txz
-| | |-- kde-l10n-fi-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-fr-4.2.4-noarch-1.txt
-| | |-- kde-l10n-fr-4.2.4-noarch-1.txz
-| | |-- kde-l10n-fr-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-ga-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ga-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ga-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-gl-4.2.4-noarch-1.txt
-| | |-- kde-l10n-gl-4.2.4-noarch-1.txz
-| | |-- kde-l10n-gl-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-gu-4.2.4-noarch-1.txt
-| | |-- kde-l10n-gu-4.2.4-noarch-1.txz
-| | |-- kde-l10n-gu-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-he-4.2.4-noarch-1.txt
-| | |-- kde-l10n-he-4.2.4-noarch-1.txz
-| | |-- kde-l10n-he-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-hi-4.2.4-noarch-1.txt
-| | |-- kde-l10n-hi-4.2.4-noarch-1.txz
-| | |-- kde-l10n-hi-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-hu-4.2.4-noarch-1.txt
-| | |-- kde-l10n-hu-4.2.4-noarch-1.txz
-| | |-- kde-l10n-hu-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-is-4.2.4-noarch-1.txt
-| | |-- kde-l10n-is-4.2.4-noarch-1.txz
-| | |-- kde-l10n-is-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-it-4.2.4-noarch-1.txt
-| | |-- kde-l10n-it-4.2.4-noarch-1.txz
-| | |-- kde-l10n-it-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-ja-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ja-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ja-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-kk-4.2.4-noarch-1.txt
-| | |-- kde-l10n-kk-4.2.4-noarch-1.txz
-| | |-- kde-l10n-kk-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-km-4.2.4-noarch-1.txt
-| | |-- kde-l10n-km-4.2.4-noarch-1.txz
-| | |-- kde-l10n-km-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-kn-4.2.4-noarch-1.txt
-| | |-- kde-l10n-kn-4.2.4-noarch-1.txz
-| | |-- kde-l10n-kn-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-ko-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ko-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ko-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-ku-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ku-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ku-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-lt-4.2.4-noarch-1.txt
-| | |-- kde-l10n-lt-4.2.4-noarch-1.txz
-| | |-- kde-l10n-lt-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-lv-4.2.4-noarch-1.txt
-| | |-- kde-l10n-lv-4.2.4-noarch-1.txz
-| | |-- kde-l10n-lv-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-mai-4.2.4-noarch-1.txt
-| | |-- kde-l10n-mai-4.2.4-noarch-1.txz
-| | |-- kde-l10n-mai-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-mk-4.2.4-noarch-1.txt
-| | |-- kde-l10n-mk-4.2.4-noarch-1.txz
-| | |-- kde-l10n-mk-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-ml-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ml-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ml-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-mr-4.2.4-noarch-1.txt
-| | |-- kde-l10n-mr-4.2.4-noarch-1.txz
-| | |-- kde-l10n-mr-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-nb-4.2.4-noarch-1.txt
-| | |-- kde-l10n-nb-4.2.4-noarch-1.txz
-| | |-- kde-l10n-nb-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-nds-4.2.4-noarch-1.txt
-| | |-- kde-l10n-nds-4.2.4-noarch-1.txz
-| | |-- kde-l10n-nds-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-nl-4.2.4-noarch-1.txt
-| | |-- kde-l10n-nl-4.2.4-noarch-1.txz
-| | |-- kde-l10n-nl-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-nn-4.2.4-noarch-1.txt
-| | |-- kde-l10n-nn-4.2.4-noarch-1.txz
-| | |-- kde-l10n-nn-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-pa-4.2.4-noarch-1.txt
-| | |-- kde-l10n-pa-4.2.4-noarch-1.txz
-| | |-- kde-l10n-pa-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-pl-4.2.4-noarch-1.txt
-| | |-- kde-l10n-pl-4.2.4-noarch-1.txz
-| | |-- kde-l10n-pl-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-pt-4.2.4-noarch-1.txt
-| | |-- kde-l10n-pt-4.2.4-noarch-1.txz
-| | |-- kde-l10n-pt-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-pt_BR-4.2.4-noarch-1.txt
-| | |-- kde-l10n-pt_BR-4.2.4-noarch-1.txz
-| | |-- kde-l10n-pt_BR-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-ro-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ro-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ro-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-ru-4.2.4-noarch-1.txt
-| | |-- kde-l10n-ru-4.2.4-noarch-1.txz
-| | |-- kde-l10n-ru-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-sk-4.2.4-noarch-1.txt
-| | |-- kde-l10n-sk-4.2.4-noarch-1.txz
-| | |-- kde-l10n-sk-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-sl-4.2.4-noarch-1.txt
-| | |-- kde-l10n-sl-4.2.4-noarch-1.txz
-| | |-- kde-l10n-sl-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-sr-4.2.4-noarch-1.txt
-| | |-- kde-l10n-sr-4.2.4-noarch-1.txz
-| | |-- kde-l10n-sr-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-sv-4.2.4-noarch-1.txt
-| | |-- kde-l10n-sv-4.2.4-noarch-1.txz
-| | |-- kde-l10n-sv-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-tg-4.2.4-noarch-1.txt
-| | |-- kde-l10n-tg-4.2.4-noarch-1.txz
-| | |-- kde-l10n-tg-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-th-4.2.4-noarch-1.txt
-| | |-- kde-l10n-th-4.2.4-noarch-1.txz
-| | |-- kde-l10n-th-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-tr-4.2.4-noarch-1.txt
-| | |-- kde-l10n-tr-4.2.4-noarch-1.txz
-| | |-- kde-l10n-tr-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-uk-4.2.4-noarch-1.txt
-| | |-- kde-l10n-uk-4.2.4-noarch-1.txz
-| | |-- kde-l10n-uk-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-wa-4.2.4-noarch-1.txt
-| | |-- kde-l10n-wa-4.2.4-noarch-1.txz
-| | |-- kde-l10n-wa-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-zh_CN-4.2.4-noarch-1.txt
-| | |-- kde-l10n-zh_CN-4.2.4-noarch-1.txz
-| | |-- kde-l10n-zh_CN-4.2.4-noarch-1.txz.asc
-| | |-- kde-l10n-zh_TW-4.2.4-noarch-1.txt
-| | |-- kde-l10n-zh_TW-4.2.4-noarch-1.txz
-| | |-- kde-l10n-zh_TW-4.2.4-noarch-1.txz.asc
-| | |-- koffice-l10n-ca-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-ca-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-ca-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-cs-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-cs-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-cs-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-da-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-da-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-da-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-de-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-de-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-de-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-el-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-el-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-el-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-en_GB-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-en_GB-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-en_GB-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-es-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-es-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-es-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-et-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-et-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-et-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-fr-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-fr-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-fr-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-fy-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-fy-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-fy-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-gl-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-gl-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-gl-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-hi-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-hi-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-hi-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-it-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-it-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-it-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-ja-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-ja-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-ja-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-kk-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-kk-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-kk-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-nb-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-nb-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-nb-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-nds-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-nds-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-nds-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-nl-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-nl-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-nl-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-pl-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-pl-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-pl-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-pt-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-pt-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-pt-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-pt_BR-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-pt_BR-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-pt_BR-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-sv-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-sv-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-sv-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-tr-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-tr-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-tr-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-uk-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-uk-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-uk-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-wa-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-wa-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-wa-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-zh_CN-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-zh_CN-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-zh_CN-2.0.2-noarch-1.txz.asc
-| | |-- koffice-l10n-zh_TW-2.0.2-noarch-1.txt
-| | |-- koffice-l10n-zh_TW-2.0.2-noarch-1.txz
-| | |-- koffice-l10n-zh_TW-2.0.2-noarch-1.txz.asc
+| | |-- kde-l10n-ar-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ar-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ar-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-bg-4.4.3-noarch-1.txt
+| | |-- kde-l10n-bg-4.4.3-noarch-1.txz
+| | |-- kde-l10n-bg-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-ca-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ca-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ca-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-ca@valencia-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ca@valencia-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ca@valencia-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-cs-4.4.3-noarch-1.txt
+| | |-- kde-l10n-cs-4.4.3-noarch-1.txz
+| | |-- kde-l10n-cs-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-csb-4.4.3-noarch-1.txt
+| | |-- kde-l10n-csb-4.4.3-noarch-1.txz
+| | |-- kde-l10n-csb-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-da-4.4.3-noarch-1.txt
+| | |-- kde-l10n-da-4.4.3-noarch-1.txz
+| | |-- kde-l10n-da-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-de-4.4.3-noarch-1.txt
+| | |-- kde-l10n-de-4.4.3-noarch-1.txz
+| | |-- kde-l10n-de-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-el-4.4.3-noarch-1.txt
+| | |-- kde-l10n-el-4.4.3-noarch-1.txz
+| | |-- kde-l10n-el-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-en_GB-4.4.3-noarch-1.txt
+| | |-- kde-l10n-en_GB-4.4.3-noarch-1.txz
+| | |-- kde-l10n-en_GB-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-eo-4.4.3-noarch-1.txt
+| | |-- kde-l10n-eo-4.4.3-noarch-1.txz
+| | |-- kde-l10n-eo-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-es-4.4.3-noarch-1.txt
+| | |-- kde-l10n-es-4.4.3-noarch-1.txz
+| | |-- kde-l10n-es-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-et-4.4.3-noarch-1.txt
+| | |-- kde-l10n-et-4.4.3-noarch-1.txz
+| | |-- kde-l10n-et-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-eu-4.4.3-noarch-1.txt
+| | |-- kde-l10n-eu-4.4.3-noarch-1.txz
+| | |-- kde-l10n-eu-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-fi-4.4.3-noarch-1.txt
+| | |-- kde-l10n-fi-4.4.3-noarch-1.txz
+| | |-- kde-l10n-fi-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-fr-4.4.3-noarch-1.txt
+| | |-- kde-l10n-fr-4.4.3-noarch-1.txz
+| | |-- kde-l10n-fr-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-fy-4.4.3-noarch-1.txt
+| | |-- kde-l10n-fy-4.4.3-noarch-1.txz
+| | |-- kde-l10n-fy-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-ga-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ga-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ga-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-gl-4.4.3-noarch-1.txt
+| | |-- kde-l10n-gl-4.4.3-noarch-1.txz
+| | |-- kde-l10n-gl-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-gu-4.4.3-noarch-1.txt
+| | |-- kde-l10n-gu-4.4.3-noarch-1.txz
+| | |-- kde-l10n-gu-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-he-4.4.3-noarch-1.txt
+| | |-- kde-l10n-he-4.4.3-noarch-1.txz
+| | |-- kde-l10n-he-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-hi-4.4.3-noarch-1.txt
+| | |-- kde-l10n-hi-4.4.3-noarch-1.txz
+| | |-- kde-l10n-hi-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-hr-4.4.3-noarch-1.txt
+| | |-- kde-l10n-hr-4.4.3-noarch-1.txz
+| | |-- kde-l10n-hr-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-hu-4.4.3-noarch-1.txt
+| | |-- kde-l10n-hu-4.4.3-noarch-1.txz
+| | |-- kde-l10n-hu-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-id-4.4.3-noarch-1.txt
+| | |-- kde-l10n-id-4.4.3-noarch-1.txz
+| | |-- kde-l10n-id-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-is-4.4.3-noarch-1.txt
+| | |-- kde-l10n-is-4.4.3-noarch-1.txz
+| | |-- kde-l10n-is-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-it-4.4.3-noarch-1.txt
+| | |-- kde-l10n-it-4.4.3-noarch-1.txz
+| | |-- kde-l10n-it-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-ja-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ja-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ja-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-kk-4.4.3-noarch-1.txt
+| | |-- kde-l10n-kk-4.4.3-noarch-1.txz
+| | |-- kde-l10n-kk-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-km-4.4.3-noarch-1.txt
+| | |-- kde-l10n-km-4.4.3-noarch-1.txz
+| | |-- kde-l10n-km-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-kn-4.4.3-noarch-1.txt
+| | |-- kde-l10n-kn-4.4.3-noarch-1.txz
+| | |-- kde-l10n-kn-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-ko-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ko-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ko-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-lt-4.4.3-noarch-1.txt
+| | |-- kde-l10n-lt-4.4.3-noarch-1.txz
+| | |-- kde-l10n-lt-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-lv-4.4.3-noarch-1.txt
+| | |-- kde-l10n-lv-4.4.3-noarch-1.txz
+| | |-- kde-l10n-lv-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-mai-4.4.3-noarch-1.txt
+| | |-- kde-l10n-mai-4.4.3-noarch-1.txz
+| | |-- kde-l10n-mai-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-mk-4.4.3-noarch-1.txt
+| | |-- kde-l10n-mk-4.4.3-noarch-1.txz
+| | |-- kde-l10n-mk-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-ml-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ml-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ml-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-nb-4.4.3-noarch-1.txt
+| | |-- kde-l10n-nb-4.4.3-noarch-1.txz
+| | |-- kde-l10n-nb-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-nds-4.4.3-noarch-1.txt
+| | |-- kde-l10n-nds-4.4.3-noarch-1.txz
+| | |-- kde-l10n-nds-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-nl-4.4.3-noarch-1.txt
+| | |-- kde-l10n-nl-4.4.3-noarch-1.txz
+| | |-- kde-l10n-nl-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-nn-4.4.3-noarch-1.txt
+| | |-- kde-l10n-nn-4.4.3-noarch-1.txz
+| | |-- kde-l10n-nn-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-pa-4.4.3-noarch-1.txt
+| | |-- kde-l10n-pa-4.4.3-noarch-1.txz
+| | |-- kde-l10n-pa-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-pl-4.4.3-noarch-1.txt
+| | |-- kde-l10n-pl-4.4.3-noarch-1.txz
+| | |-- kde-l10n-pl-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-pt-4.4.3-noarch-1.txt
+| | |-- kde-l10n-pt-4.4.3-noarch-1.txz
+| | |-- kde-l10n-pt-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-pt_BR-4.4.3-noarch-1.txt
+| | |-- kde-l10n-pt_BR-4.4.3-noarch-1.txz
+| | |-- kde-l10n-pt_BR-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-ro-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ro-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ro-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-ru-4.4.3-noarch-1.txt
+| | |-- kde-l10n-ru-4.4.3-noarch-1.txz
+| | |-- kde-l10n-ru-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-si-4.4.3-noarch-1.txt
+| | |-- kde-l10n-si-4.4.3-noarch-1.txz
+| | |-- kde-l10n-si-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-sk-4.4.3-noarch-1.txt
+| | |-- kde-l10n-sk-4.4.3-noarch-1.txz
+| | |-- kde-l10n-sk-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-sl-4.4.3-noarch-1.txt
+| | |-- kde-l10n-sl-4.4.3-noarch-1.txz
+| | |-- kde-l10n-sl-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-sr-4.4.3-noarch-1.txt
+| | |-- kde-l10n-sr-4.4.3-noarch-1.txz
+| | |-- kde-l10n-sr-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-sv-4.4.3-noarch-1.txt
+| | |-- kde-l10n-sv-4.4.3-noarch-1.txz
+| | |-- kde-l10n-sv-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-tg-4.4.3-noarch-1.txt
+| | |-- kde-l10n-tg-4.4.3-noarch-1.txz
+| | |-- kde-l10n-tg-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-tr-4.4.3-noarch-1.txt
+| | |-- kde-l10n-tr-4.4.3-noarch-1.txz
+| | |-- kde-l10n-tr-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-uk-4.4.3-noarch-1.txt
+| | |-- kde-l10n-uk-4.4.3-noarch-1.txz
+| | |-- kde-l10n-uk-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-wa-4.4.3-noarch-1.txt
+| | |-- kde-l10n-wa-4.4.3-noarch-1.txz
+| | |-- kde-l10n-wa-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-zh_CN-4.4.3-noarch-1.txt
+| | |-- kde-l10n-zh_CN-4.4.3-noarch-1.txz
+| | |-- kde-l10n-zh_CN-4.4.3-noarch-1.txz.asc
+| | |-- kde-l10n-zh_TW-4.4.3-noarch-1.txt
+| | |-- kde-l10n-zh_TW-4.4.3-noarch-1.txz
+| | |-- kde-l10n-zh_TW-4.4.3-noarch-1.txz.asc
+| | |-- koffice-l10n-ca-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-ca-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-ca-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-ca@valencia-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-ca@valencia-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-ca@valencia-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-da-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-da-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-da-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-de-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-de-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-de-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-el-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-el-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-el-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-en_GB-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-en_GB-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-en_GB-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-es-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-es-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-es-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-et-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-et-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-et-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-fr-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-fr-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-fr-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-fy-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-fy-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-fy-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-gl-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-gl-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-gl-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-hne-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-hne-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-hne-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-it-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-it-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-it-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-ja-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-ja-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-ja-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-kk-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-kk-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-kk-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-nb-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-nb-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-nb-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-nds-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-nds-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-nds-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-nl-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-nl-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-nl-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-pl-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-pl-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-pl-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-pt-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-pt-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-pt-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-pt_BR-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-pt_BR-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-pt_BR-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-sv-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-sv-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-sv-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-tr-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-tr-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-tr-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-uk-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-uk-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-uk-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-wa-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-wa-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-wa-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-zh_CN-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-zh_CN-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-zh_CN-2.1.2-noarch-1.txz.asc
+| | |-- koffice-l10n-zh_TW-2.1.2-noarch-1.txt
+| | |-- koffice-l10n-zh_TW-2.1.2-noarch-1.txz
+| | |-- koffice-l10n-zh_TW-2.1.2-noarch-1.txz.asc
| | |-- maketag
| | |-- maketag.ez
| | `-- tagfile
| |-- l
+| | |-- ConsoleKit-20100129-x86_64-1.txt
+| | |-- ConsoleKit-20100129-x86_64-1.txz
+| | |-- ConsoleKit-20100129-x86_64-1.txz.asc
| | |-- M2Crypto-0.19.1-x86_64-2.txt
| | |-- M2Crypto-0.19.1-x86_64-2.txz
| | |-- M2Crypto-0.19.1-x86_64-2.txz.asc
-| | |-- PyQt-4.4.4-x86_64-2.txt
-| | |-- PyQt-4.4.4-x86_64-2.txz
-| | |-- PyQt-4.4.4-x86_64-2.txz.asc
-| | |-- QScintilla-2.3.2-x86_64-2.txt
-| | |-- QScintilla-2.3.2-x86_64-2.txz
-| | |-- QScintilla-2.3.2-x86_64-2.txz.asc
+| | |-- PyQt-4.7.3-x86_64-1.txt
+| | |-- PyQt-4.7.3-x86_64-1.txz
+| | |-- PyQt-4.7.3-x86_64-1.txz.asc
+| | |-- QScintilla-2.4.3-x86_64-1.txt
+| | |-- QScintilla-2.4.3-x86_64-1.txz
+| | |-- QScintilla-2.4.3-x86_64-1.txz.asc
| | |-- aalib-1.4rc5-x86_64-2.txt
| | |-- aalib-1.4rc5-x86_64-2.txz
| | |-- aalib-1.4rc5-x86_64-2.txz.asc
-| | |-- akonadi-1.1.2-x86_64-1.txt
-| | |-- akonadi-1.1.2-x86_64-1.txz
-| | |-- akonadi-1.1.2-x86_64-1.txz.asc
-| | |-- alsa-lib-1.0.18-x86_64-2.txt
-| | |-- alsa-lib-1.0.18-x86_64-2.txz
-| | |-- alsa-lib-1.0.18-x86_64-2.txz.asc
+| | |-- akonadi-1.3.1-x86_64-1.txt
+| | |-- akonadi-1.3.1-x86_64-1.txz
+| | |-- akonadi-1.3.1-x86_64-1.txz.asc
+| | |-- alsa-lib-1.0.23-x86_64-1.txt
+| | |-- alsa-lib-1.0.23-x86_64-1.txz
+| | |-- alsa-lib-1.0.23-x86_64-1.txz.asc
| | |-- alsa-oss-1.0.17-x86_64-1.txt
| | |-- alsa-oss-1.0.17-x86_64-1.txz
| | |-- alsa-oss-1.0.17-x86_64-1.txz.asc
-| | |-- apr-1.3.8-x86_64-1.txt
-| | |-- apr-1.3.8-x86_64-1.txz
-| | |-- apr-1.3.8-x86_64-1.txz.asc
-| | |-- apr-util-1.3.9-x86_64-1.txt
-| | |-- apr-util-1.3.9-x86_64-1.txz
-| | |-- apr-util-1.3.9-x86_64-1.txz.asc
+| | |-- apr-1.3.9-x86_64-1.txt
+| | |-- apr-1.3.9-x86_64-1.txz
+| | |-- apr-1.3.9-x86_64-1.txz.asc
+| | |-- apr-util-1.3.9-x86_64-2.txt
+| | |-- apr-util-1.3.9-x86_64-2.txz
+| | |-- apr-util-1.3.9-x86_64-2.txz.asc
| | |-- aspell-0.60.5-x86_64-2.txt
| | |-- aspell-0.60.5-x86_64-2.txz
| | |-- aspell-0.60.5-x86_64-2.txz.asc
| | |-- aspell-en-6.0_0-noarch-4.txt
| | |-- aspell-en-6.0_0-noarch-4.txz
| | |-- aspell-en-6.0_0-noarch-4.txz.asc
-| | |-- atk-1.26.0-x86_64-1.txt
-| | |-- atk-1.26.0-x86_64-1.txz
-| | |-- atk-1.26.0-x86_64-1.txz.asc
+| | |-- atk-1.30.0-x86_64-1.txt
+| | |-- atk-1.30.0-x86_64-1.txz
+| | |-- atk-1.30.0-x86_64-1.txz.asc
+| | |-- attica-0.1.3-x86_64-1.txt
+| | |-- attica-0.1.3-x86_64-1.txz
+| | |-- attica-0.1.3-x86_64-1.txz.asc
| | |-- audiofile-0.2.6-x86_64-2.txt
| | |-- audiofile-0.2.6-x86_64-2.txz
| | |-- audiofile-0.2.6-x86_64-2.txz.asc
| | |-- automoc4-0.9.88-x86_64-1.txt
| | |-- automoc4-0.9.88-x86_64-1.txz
| | |-- automoc4-0.9.88-x86_64-1.txz.asc
-| | |-- babl-0.0.22-x86_64-1.txt
-| | |-- babl-0.0.22-x86_64-1.txz
-| | |-- babl-0.0.22-x86_64-1.txz.asc
-| | |-- boost-1.38.0-x86_64-2.txt
-| | |-- boost-1.38.0-x86_64-2.txz
-| | |-- boost-1.38.0-x86_64-2.txz.asc
-| | |-- cairo-1.8.6-x86_64-3.txt
-| | |-- cairo-1.8.6-x86_64-3.txz
-| | |-- cairo-1.8.6-x86_64-3.txz.asc
+| | |-- babl-0.1.0-x86_64-1.txt
+| | |-- babl-0.1.0-x86_64-1.txz
+| | |-- babl-0.1.0-x86_64-1.txz.asc
+| | |-- boost-1.42.0-x86_64-1.txt
+| | |-- boost-1.42.0-x86_64-1.txz
+| | |-- boost-1.42.0-x86_64-1.txz.asc
+| | |-- cairo-1.8.8-x86_64-3.txt
+| | |-- cairo-1.8.8-x86_64-3.txz
+| | |-- cairo-1.8.8-x86_64-3.txz.asc
| | |-- chmlib-0.39-x86_64-1.txt
| | |-- chmlib-0.39-x86_64-1.txz
| | |-- chmlib-0.39-x86_64-1.txz.asc
@@ -1739,176 +1773,194 @@ see additional documentation files. | | |-- db44-4.4.20-x86_64-2.txt
| | |-- db44-4.4.20-x86_64-2.txz
| | |-- db44-4.4.20-x86_64-2.txz.asc
-| | |-- dbus-glib-0.80-x86_64-1.txt
-| | |-- dbus-glib-0.80-x86_64-1.txz
-| | |-- dbus-glib-0.80-x86_64-1.txz.asc
-| | |-- dbus-python-0.83.0-x86_64-2.txt
-| | |-- dbus-python-0.83.0-x86_64-2.txz
-| | |-- dbus-python-0.83.0-x86_64-2.txz.asc
-| | |-- desktop-file-utils-0.15-x86_64-1.txt
-| | |-- desktop-file-utils-0.15-x86_64-1.txz
-| | |-- desktop-file-utils-0.15-x86_64-1.txz.asc
-| | |-- djvulibre-3.5.21-x86_64-1.txt
-| | |-- djvulibre-3.5.21-x86_64-1.txz
-| | |-- djvulibre-3.5.21-x86_64-1.txz.asc
-| | |-- eigen2-r948353-x86_64-1.txt
-| | |-- eigen2-r948353-x86_64-1.txz
-| | |-- eigen2-r948353-x86_64-1.txz.asc
-| | |-- enchant-1.4.2-x86_64-1.txt
-| | |-- enchant-1.4.2-x86_64-1.txz
-| | |-- enchant-1.4.2-x86_64-1.txz.asc
+| | |-- dbus-glib-0.86-x86_64-1.txt
+| | |-- dbus-glib-0.86-x86_64-1.txz
+| | |-- dbus-glib-0.86-x86_64-1.txz.asc
+| | |-- dbus-python-0.83.1-x86_64-1.txt
+| | |-- dbus-python-0.83.1-x86_64-1.txz
+| | |-- dbus-python-0.83.1-x86_64-1.txz.asc
+| | |-- desktop-file-utils-0.16-x86_64-2.txt
+| | |-- desktop-file-utils-0.16-x86_64-2.txz
+| | |-- desktop-file-utils-0.16-x86_64-2.txz.asc
+| | |-- djvulibre-3.5.22-x86_64-2.txt
+| | |-- djvulibre-3.5.22-x86_64-2.txz
+| | |-- djvulibre-3.5.22-x86_64-2.txz.asc
+| | |-- ebook-tools-0.1.1-x86_64-2.txt
+| | |-- ebook-tools-0.1.1-x86_64-2.txz
+| | |-- ebook-tools-0.1.1-x86_64-2.txz.asc
+| | |-- eggdbus-0.6-x86_64-1.txt
+| | |-- eggdbus-0.6-x86_64-1.txz
+| | |-- eggdbus-0.6-x86_64-1.txz.asc
+| | |-- eigen2-2.0.10-x86_64-1.txt
+| | |-- eigen2-2.0.10-x86_64-1.txz
+| | |-- eigen2-2.0.10-x86_64-1.txz.asc
+| | |-- enchant-1.5.0-x86_64-1.txt
+| | |-- enchant-1.5.0-x86_64-1.txz
+| | |-- enchant-1.5.0-x86_64-1.txz.asc
| | |-- esound-0.2.41-x86_64-1.txt
| | |-- esound-0.2.41-x86_64-1.txz
| | |-- esound-0.2.41-x86_64-1.txz.asc
-| | |-- exiv2-0.18.1-x86_64-1.txt
-| | |-- exiv2-0.18.1-x86_64-1.txz
-| | |-- exiv2-0.18.1-x86_64-1.txz.asc
+| | |-- exiv2-0.18.2-x86_64-1.txt
+| | |-- exiv2-0.18.2-x86_64-1.txz
+| | |-- exiv2-0.18.2-x86_64-1.txz.asc
| | |-- expat-2.0.1-x86_64-1.txt
| | |-- expat-2.0.1-x86_64-1.txz
| | |-- expat-2.0.1-x86_64-1.txz.asc
-| | |-- freetype-2.3.9-x86_64-1.txt
-| | |-- freetype-2.3.9-x86_64-1.txz
-| | |-- freetype-2.3.9-x86_64-1.txz.asc
+| | |-- fftw-3.2.2-x86_64-1.txt
+| | |-- fftw-3.2.2-x86_64-1.txz
+| | |-- fftw-3.2.2-x86_64-1.txz.asc
+| | |-- freetype-2.3.12-x86_64-1.txt
+| | |-- freetype-2.3.12-x86_64-1.txz
+| | |-- freetype-2.3.12-x86_64-1.txz.asc
| | |-- fribidi-0.10.9-x86_64-2.txt
| | |-- fribidi-0.10.9-x86_64-2.txz
| | |-- fribidi-0.10.9-x86_64-2.txz.asc
-| | |-- fuse-2.7.4-x86_64-2.txt
-| | |-- fuse-2.7.4-x86_64-2.txz
-| | |-- fuse-2.7.4-x86_64-2.txz.asc
+| | |-- fuse-2.8.1-x86_64-1.txt
+| | |-- fuse-2.8.1-x86_64-1.txz
+| | |-- fuse-2.8.1-x86_64-1.txz.asc
| | |-- gamin-0.1.10-x86_64-2.txt
| | |-- gamin-0.1.10-x86_64-2.txz
| | |-- gamin-0.1.10-x86_64-2.txz.asc
-| | |-- gd-2.0.35-x86_64-3.txt
-| | |-- gd-2.0.35-x86_64-3.txz
-| | |-- gd-2.0.35-x86_64-3.txz.asc
+| | |-- gd-2.0.35-x86_64-4.txt
+| | |-- gd-2.0.35-x86_64-4.txz
+| | |-- gd-2.0.35-x86_64-4.txz.asc
| | |-- gdbm-1.8.3-x86_64-4.txt
| | |-- gdbm-1.8.3-x86_64-4.txz
| | |-- gdbm-1.8.3-x86_64-4.txz.asc
-| | |-- gegl-0.0.22-x86_64-1.txt
-| | |-- gegl-0.0.22-x86_64-1.txz
-| | |-- gegl-0.0.22-x86_64-1.txz.asc
+| | |-- gegl-0.1.0-x86_64-2.txt
+| | |-- gegl-0.1.0-x86_64-2.txz
+| | |-- gegl-0.1.0-x86_64-2.txz.asc
+| | |-- giflib-4.1.6-x86_64-1.txt
+| | |-- giflib-4.1.6-x86_64-1.txz
+| | |-- giflib-4.1.6-x86_64-1.txz.asc
| | |-- glib-1.2.10-x86_64-3.txt
| | |-- glib-1.2.10-x86_64-3.txz
| | |-- glib-1.2.10-x86_64-3.txz.asc
-| | |-- glib2-2.18.4-x86_64-1.txt
-| | |-- glib2-2.18.4-x86_64-1.txz
-| | |-- glib2-2.18.4-x86_64-1.txz.asc
-| | |-- glibc-2.9-x86_64-3.txt
-| | |-- glibc-2.9-x86_64-3.txz
-| | |-- glibc-2.9-x86_64-3.txz.asc
-| | |-- glibc-i18n-2.9-x86_64-3.txt
-| | |-- glibc-i18n-2.9-x86_64-3.txz
-| | |-- glibc-i18n-2.9-x86_64-3.txz.asc
-| | |-- glibc-profile-2.9-x86_64-3.txt
-| | |-- glibc-profile-2.9-x86_64-3.txz
-| | |-- glibc-profile-2.9-x86_64-3.txz.asc
-| | |-- gmime-2.2.23-x86_64-1.txt
-| | |-- gmime-2.2.23-x86_64-1.txz
-| | |-- gmime-2.2.23-x86_64-1.txz.asc
+| | |-- glib2-2.22.5-x86_64-1.txt
+| | |-- glib2-2.22.5-x86_64-1.txz
+| | |-- glib2-2.22.5-x86_64-1.txz.asc
+| | |-- glibc-2.11.1-x86_64-3.txt
+| | |-- glibc-2.11.1-x86_64-3.txz
+| | |-- glibc-2.11.1-x86_64-3.txz.asc
+| | |-- glibc-i18n-2.11.1-x86_64-3.txt
+| | |-- glibc-i18n-2.11.1-x86_64-3.txz
+| | |-- glibc-i18n-2.11.1-x86_64-3.txz.asc
+| | |-- glibc-profile-2.11.1-x86_64-3.txt
+| | |-- glibc-profile-2.11.1-x86_64-3.txz
+| | |-- glibc-profile-2.11.1-x86_64-3.txz.asc
+| | |-- gmime-2.4.15-x86_64-1.txt
+| | |-- gmime-2.4.15-x86_64-1.txz
+| | |-- gmime-2.4.15-x86_64-1.txz.asc
| | |-- gmm-3.1-noarch-1.txt
| | |-- gmm-3.1-noarch-1.txz
| | |-- gmm-3.1-noarch-1.txz.asc
-| | |-- gmp-4.2.4-x86_64-1.txt
-| | |-- gmp-4.2.4-x86_64-1.txz
-| | |-- gmp-4.2.4-x86_64-1.txz.asc
-| | |-- gnome-icon-theme-2.26.0-x86_64-1.txt
-| | |-- gnome-icon-theme-2.26.0-x86_64-1.txz
-| | |-- gnome-icon-theme-2.26.0-x86_64-1.txz.asc
-| | |-- gst-plugins-base-0.10.23-x86_64-1.txt
-| | |-- gst-plugins-base-0.10.23-x86_64-1.txz
-| | |-- gst-plugins-base-0.10.23-x86_64-1.txz.asc
-| | |-- gstreamer-0.10.23-x86_64-1.txt
-| | |-- gstreamer-0.10.23-x86_64-1.txz
-| | |-- gstreamer-0.10.23-x86_64-1.txz.asc
+| | |-- gmp-5.0.1-x86_64-1.txt
+| | |-- gmp-5.0.1-x86_64-1.txz
+| | |-- gmp-5.0.1-x86_64-1.txz.asc
+| | |-- gnome-icon-theme-2.30.2-x86_64-1.txt
+| | |-- gnome-icon-theme-2.30.2-x86_64-1.txz
+| | |-- gnome-icon-theme-2.30.2-x86_64-1.txz.asc
+| | |-- gst-plugins-base-0.10.29-x86_64-1.txt
+| | |-- gst-plugins-base-0.10.29-x86_64-1.txz
+| | |-- gst-plugins-base-0.10.29-x86_64-1.txz.asc
+| | |-- gst-plugins-good-0.10.22-x86_64-1.txt
+| | |-- gst-plugins-good-0.10.22-x86_64-1.txz
+| | |-- gst-plugins-good-0.10.22-x86_64-1.txz.asc
+| | |-- gstreamer-0.10.29-x86_64-1.txt
+| | |-- gstreamer-0.10.29-x86_64-1.txz
+| | |-- gstreamer-0.10.29-x86_64-1.txz.asc
| | |-- gtk+-1.2.10-x86_64-5.txt
| | |-- gtk+-1.2.10-x86_64-5.txz
| | |-- gtk+-1.2.10-x86_64-5.txz.asc
-| | |-- gtk+2-2.14.7-x86_64-4.txt
-| | |-- gtk+2-2.14.7-x86_64-4.txz
-| | |-- gtk+2-2.14.7-x86_64-4.txz.asc
+| | |-- gtk+2-2.18.9-x86_64-1.txt
+| | |-- gtk+2-2.18.9-x86_64-1.txz
+| | |-- gtk+2-2.18.9-x86_64-1.txz.asc
| | |-- gtkspell-2.0.15-x86_64-1.txt
| | |-- gtkspell-2.0.15-x86_64-1.txz
| | |-- gtkspell-2.0.15-x86_64-1.txz.asc
-| | |-- hal-0.5.11-x86_64-6.txt
-| | |-- hal-0.5.11-x86_64-6.txz
-| | |-- hal-0.5.11-x86_64-6.txz.asc
-| | |-- hal-info-20090716-noarch-1.txt
-| | |-- hal-info-20090716-noarch-1.txz
-| | |-- hal-info-20090716-noarch-1.txz.asc
-| | |-- hicolor-icon-theme-0.10-noarch-5.txt
-| | |-- hicolor-icon-theme-0.10-noarch-5.txz
-| | |-- hicolor-icon-theme-0.10-noarch-5.txz.asc
+| | |-- hal-0.5.14-x86_64-2.txt
+| | |-- hal-0.5.14-x86_64-2.txz
+| | |-- hal-0.5.14-x86_64-2.txz.asc
+| | |-- hal-info-20091130-noarch-1.txt
+| | |-- hal-info-20091130-noarch-1.txz
+| | |-- hal-info-20091130-noarch-1.txz.asc
+| | |-- hicolor-icon-theme-0.12-noarch-1.txt
+| | |-- hicolor-icon-theme-0.12-noarch-1.txz
+| | |-- hicolor-icon-theme-0.12-noarch-1.txz.asc
+| | |-- hunspell-1.2.9-x86_64-1.txt
+| | |-- hunspell-1.2.9-x86_64-1.txz
+| | |-- hunspell-1.2.9-x86_64-1.txz.asc
| | |-- icon-naming-utils-0.8.90-x86_64-2.txt
| | |-- icon-naming-utils-0.8.90-x86_64-2.txz
| | |-- icon-naming-utils-0.8.90-x86_64-2.txz.asc
| | |-- ilmbase-1.0.1-x86_64-1.txt
| | |-- ilmbase-1.0.1-x86_64-1.txz
| | |-- ilmbase-1.0.1-x86_64-1.txz.asc
-| | |-- imlib-1.9.15-x86_64-5.txt
-| | |-- imlib-1.9.15-x86_64-5.txz
-| | |-- imlib-1.9.15-x86_64-5.txz.asc
+| | |-- imlib-1.9.15-x86_64-6.txt
+| | |-- imlib-1.9.15-x86_64-6.txz
+| | |-- imlib-1.9.15-x86_64-6.txz.asc
| | |-- install-packages
| | |-- install.end
| | |-- iso-codes-3.8-noarch-1.txt
| | |-- iso-codes-3.8-noarch-1.txz
| | |-- iso-codes-3.8-noarch-1.txz.asc
-| | |-- jasper-1.900.1-x86_64-2.txt
-| | |-- jasper-1.900.1-x86_64-2.txz
-| | |-- jasper-1.900.1-x86_64-2.txz.asc
-| | |-- jre-6u16-x86_64-1.txt
-| | |-- jre-6u16-x86_64-1.txz
-| | |-- jre-6u16-x86_64-1.txz.asc
-| | |-- lcms-1.18-x86_64-1.txt
-| | |-- lcms-1.18-x86_64-1.txz
-| | |-- lcms-1.18-x86_64-1.txz.asc
-| | |-- lesstif-0.95.0-x86_64-5.txt
-| | |-- lesstif-0.95.0-x86_64-5.txz
-| | |-- lesstif-0.95.0-x86_64-5.txz.asc
-| | |-- libaio-0.3.106-x86_64-1.txt
-| | |-- libaio-0.3.106-x86_64-1.txz
-| | |-- libaio-0.3.106-x86_64-1.txz.asc
+| | |-- jasper-1.900.1-x86_64-3.txt
+| | |-- jasper-1.900.1-x86_64-3.txz
+| | |-- jasper-1.900.1-x86_64-3.txz.asc
+| | |-- jre-6u20-x86_64-1.txt
+| | |-- jre-6u20-x86_64-1.txz
+| | |-- jre-6u20-x86_64-1.txz.asc
+| | |-- lcms-1.19-x86_64-1.txt
+| | |-- lcms-1.19-x86_64-1.txz
+| | |-- lcms-1.19-x86_64-1.txz.asc
+| | |-- lesstif-0.95.2-x86_64-1.txt
+| | |-- lesstif-0.95.2-x86_64-1.txz
+| | |-- lesstif-0.95.2-x86_64-1.txz.asc
+| | |-- libaio-0.3.109-x86_64-1.txt
+| | |-- libaio-0.3.109-x86_64-1.txz
+| | |-- libaio-0.3.109-x86_64-1.txz.asc
| | |-- libao-0.8.8-x86_64-1.txt
| | |-- libao-0.8.8-x86_64-1.txz
| | |-- libao-0.8.8-x86_64-1.txz.asc
-| | |-- libarchive-2.6.2-x86_64-1.txt
-| | |-- libarchive-2.6.2-x86_64-1.txz
-| | |-- libarchive-2.6.2-x86_64-1.txz.asc
+| | |-- libarchive-2.8.0-x86_64-1.txt
+| | |-- libarchive-2.8.0-x86_64-1.txz
+| | |-- libarchive-2.8.0-x86_64-1.txz.asc
| | |-- libart_lgpl-2.3.20-x86_64-1.txt
| | |-- libart_lgpl-2.3.20-x86_64-1.txz
| | |-- libart_lgpl-2.3.20-x86_64-1.txz.asc
| | |-- libcaca-0.99.beta16-x86_64-3.txt
| | |-- libcaca-0.99.beta16-x86_64-3.txz
| | |-- libcaca-0.99.beta16-x86_64-3.txz.asc
-| | |-- libcap-2.16-x86_64-2.txt
-| | |-- libcap-2.16-x86_64-2.txz
-| | |-- libcap-2.16-x86_64-2.txz.asc
+| | |-- libcap-2.19-x86_64-1.txt
+| | |-- libcap-2.19-x86_64-1.txz
+| | |-- libcap-2.19-x86_64-1.txz.asc
| | |-- libcddb-1.3.0-x86_64-1.txt
| | |-- libcddb-1.3.0-x86_64-1.txz
| | |-- libcddb-1.3.0-x86_64-1.txz.asc
| | |-- libcdio-0.79-x86_64-1.txt
| | |-- libcdio-0.79-x86_64-1.txz
| | |-- libcdio-0.79-x86_64-1.txz.asc
+| | |-- libdiscid-0.2.2-x86_64-1.txt
+| | |-- libdiscid-0.2.2-x86_64-1.txz
+| | |-- libdiscid-0.2.2-x86_64-1.txz.asc
| | |-- libdvdread-4.1.3-x86_64-1.txt
| | |-- libdvdread-4.1.3-x86_64-1.txz
| | |-- libdvdread-4.1.3-x86_64-1.txz.asc
-| | |-- libexif-0.6.16-x86_64-1.txt
-| | |-- libexif-0.6.16-x86_64-1.txz
-| | |-- libexif-0.6.16-x86_64-1.txz.asc
-| | |-- libglade-2.6.4-x86_64-2.txt
-| | |-- libglade-2.6.4-x86_64-2.txz
-| | |-- libglade-2.6.4-x86_64-2.txz.asc
-| | |-- libgphoto2-2.4.6-x86_64-1.txt
-| | |-- libgphoto2-2.4.6-x86_64-1.txz
-| | |-- libgphoto2-2.4.6-x86_64-1.txz.asc
+| | |-- libexif-0.6.19-x86_64-1.txt
+| | |-- libexif-0.6.19-x86_64-1.txz
+| | |-- libexif-0.6.19-x86_64-1.txz.asc
+| | |-- libglade-2.6.4-x86_64-4.txt
+| | |-- libglade-2.6.4-x86_64-4.txz
+| | |-- libglade-2.6.4-x86_64-4.txz.asc
+| | |-- libgphoto2-2.4.9-x86_64-1.txt
+| | |-- libgphoto2-2.4.9-x86_64-1.txz
+| | |-- libgphoto2-2.4.9-x86_64-1.txz.asc
| | |-- libgpod-0.7.2-x86_64-1.txt
| | |-- libgpod-0.7.2-x86_64-1.txz
| | |-- libgpod-0.7.2-x86_64-1.txz.asc
-| | |-- libgsf-1.14.15-x86_64-1.txt
-| | |-- libgsf-1.14.15-x86_64-1.txz
-| | |-- libgsf-1.14.15-x86_64-1.txz.asc
-| | |-- libgtkhtml-2.11.1-x86_64-2.txt
-| | |-- libgtkhtml-2.11.1-x86_64-2.txz
-| | |-- libgtkhtml-2.11.1-x86_64-2.txz.asc
+| | |-- libgsf-1.14.16-x86_64-1.txt
+| | |-- libgsf-1.14.16-x86_64-1.txz
+| | |-- libgsf-1.14.16-x86_64-1.txz.asc
| | |-- libical-0.43-x86_64-1.txt
| | |-- libical-0.43-x86_64-1.txz
| | |-- libical-0.43-x86_64-1.txz.asc
@@ -1924,12 +1976,18 @@ see additional documentation files. | | |-- libieee1284-0.2.11-x86_64-2.txt
| | |-- libieee1284-0.2.11-x86_64-2.txz
| | |-- libieee1284-0.2.11-x86_64-2.txz.asc
-| | |-- libjpeg-6b-x86_64-5.txt
-| | |-- libjpeg-6b-x86_64-5.txz
-| | |-- libjpeg-6b-x86_64-5.txz.asc
+| | |-- libiodbc-3.52.7-x86_64-2.txt
+| | |-- libiodbc-3.52.7-x86_64-2.txz
+| | |-- libiodbc-3.52.7-x86_64-2.txz.asc
+| | |-- libjpeg-v8a-x86_64-1.txt
+| | |-- libjpeg-v8a-x86_64-1.txz
+| | |-- libjpeg-v8a-x86_64-1.txz.asc
| | |-- libkarma-0.1.1-x86_64-1.txt
| | |-- libkarma-0.1.1-x86_64-1.txz
| | |-- libkarma-0.1.1-x86_64-1.txz.asc
+| | |-- liblastfm-0.3.0-x86_64-2.txt
+| | |-- liblastfm-0.3.0-x86_64-2.txz
+| | |-- liblastfm-0.3.0-x86_64-2.txz.asc
| | |-- libmad-0.15.1b-x86_64-3.txt
| | |-- libmad-0.15.1b-x86_64-3.txz
| | |-- libmad-0.15.1b-x86_64-3.txz.asc
@@ -1939,93 +1997,99 @@ see additional documentation files. | | |-- libmcs-0.7.1-x86_64-1.txt
| | |-- libmcs-0.7.1-x86_64-1.txz
| | |-- libmcs-0.7.1-x86_64-1.txz.asc
-| | |-- libmng-1.0.10-x86_64-1.txt
-| | |-- libmng-1.0.10-x86_64-1.txz
-| | |-- libmng-1.0.10-x86_64-1.txz.asc
+| | |-- libmng-1.0.10-x86_64-2.txt
+| | |-- libmng-1.0.10-x86_64-2.txz
+| | |-- libmng-1.0.10-x86_64-2.txz.asc
| | |-- libmowgli-0.6.0-x86_64-1.txt
| | |-- libmowgli-0.6.0-x86_64-1.txz
| | |-- libmowgli-0.6.0-x86_64-1.txz.asc
-| | |-- libmsn-r96-x86_64-1.txt
-| | |-- libmsn-r96-x86_64-1.txz
-| | |-- libmsn-r96-x86_64-1.txz.asc
-| | |-- libmtp-0.3.6-x86_64-1.txt
-| | |-- libmtp-0.3.6-x86_64-1.txz
-| | |-- libmtp-0.3.6-x86_64-1.txz.asc
+| | |-- libmsn-4.1-x86_64-1.txt
+| | |-- libmsn-4.1-x86_64-1.txz
+| | |-- libmsn-4.1-x86_64-1.txz.asc
+| | |-- libmtp-1.0.1-x86_64-2.txt
+| | |-- libmtp-1.0.1-x86_64-2.txz
+| | |-- libmtp-1.0.1-x86_64-2.txz.asc
| | |-- libnjb-2.2.6-x86_64-4.txt
| | |-- libnjb-2.2.6-x86_64-4.txz
| | |-- libnjb-2.2.6-x86_64-4.txz.asc
| | |-- libnl-1.1-x86_64-1.txt
| | |-- libnl-1.1-x86_64-1.txz
| | |-- libnl-1.1-x86_64-1.txz.asc
-| | |-- libogg-1.1.3-x86_64-2.txt
-| | |-- libogg-1.1.3-x86_64-2.txz
-| | |-- libogg-1.1.3-x86_64-2.txz.asc
+| | |-- libnotify-0.4.5-x86_64-2.txt
+| | |-- libnotify-0.4.5-x86_64-2.txz
+| | |-- libnotify-0.4.5-x86_64-2.txz.asc
+| | |-- libogg-1.1.4-x86_64-1.txt
+| | |-- libogg-1.1.4-x86_64-1.txz
+| | |-- libogg-1.1.4-x86_64-1.txz.asc
| | |-- liboil-0.3.16-x86_64-1.txt
| | |-- liboil-0.3.16-x86_64-1.txz
| | |-- liboil-0.3.16-x86_64-1.txz.asc
-| | |-- libpng-1.2.37-x86_64-1.txt
-| | |-- libpng-1.2.37-x86_64-1.txz
-| | |-- libpng-1.2.37-x86_64-1.txz.asc
-| | |-- libraw1394-2.0.0-x86_64-1.txt
-| | |-- libraw1394-2.0.0-x86_64-1.txz
-| | |-- libraw1394-2.0.0-x86_64-1.txz.asc
-| | |-- librsvg-2.26.0-x86_64-2.txt
-| | |-- librsvg-2.26.0-x86_64-2.txz
-| | |-- librsvg-2.26.0-x86_64-2.txz.asc
-| | |-- libspectre-0.2.2-x86_64-1.txt
-| | |-- libspectre-0.2.2-x86_64-1.txz
-| | |-- libspectre-0.2.2-x86_64-1.txz.asc
+| | |-- libpng-1.4.2-x86_64-1.txt
+| | |-- libpng-1.4.2-x86_64-1.txz
+| | |-- libpng-1.4.2-x86_64-1.txz.asc
+| | |-- libraw1394-2.0.5-x86_64-1.txt
+| | |-- libraw1394-2.0.5-x86_64-1.txz
+| | |-- libraw1394-2.0.5-x86_64-1.txz.asc
+| | |-- librsvg-2.26.0-x86_64-3.txt
+| | |-- librsvg-2.26.0-x86_64-3.txz
+| | |-- librsvg-2.26.0-x86_64-3.txz.asc
+| | |-- libsamplerate-0.1.7-x86_64-1.txt
+| | |-- libsamplerate-0.1.7-x86_64-1.txz
+| | |-- libsamplerate-0.1.7-x86_64-1.txz.asc
+| | |-- libspectre-0.2.5-x86_64-1.txt
+| | |-- libspectre-0.2.5-x86_64-1.txz
+| | |-- libspectre-0.2.5-x86_64-1.txz.asc
| | |-- libtermcap-1.2.3-x86_64-7.txt
| | |-- libtermcap-1.2.3-x86_64-7.txz
| | |-- libtermcap-1.2.3-x86_64-7.txz.asc
-| | |-- libtheora-1.0-x86_64-1.txt
-| | |-- libtheora-1.0-x86_64-1.txz
-| | |-- libtheora-1.0-x86_64-1.txz.asc
-| | |-- libtiff-3.8.2-x86_64-3.txt
-| | |-- libtiff-3.8.2-x86_64-3.txz
-| | |-- libtiff-3.8.2-x86_64-3.txz.asc
-| | |-- libungif-4.1.4-x86_64-4.txt
-| | |-- libungif-4.1.4-x86_64-4.txz
-| | |-- libungif-4.1.4-x86_64-4.txz.asc
-| | |-- libusb-0.1.12-x86_64-2.txt
-| | |-- libusb-0.1.12-x86_64-2.txz
-| | |-- libusb-0.1.12-x86_64-2.txz.asc
+| | |-- libtheora-1.1.1-x86_64-1.txt
+| | |-- libtheora-1.1.1-x86_64-1.txz
+| | |-- libtheora-1.1.1-x86_64-1.txz.asc
+| | |-- libtiff-3.9.2-x86_64-1.txt
+| | |-- libtiff-3.9.2-x86_64-1.txz
+| | |-- libtiff-3.9.2-x86_64-1.txz.asc
+| | |-- libusb-1.0.6-x86_64-1.txt
+| | |-- libusb-1.0.6-x86_64-1.txz
+| | |-- libusb-1.0.6-x86_64-1.txz.asc
| | |-- libvisual-0.4.0-x86_64-2.txt
| | |-- libvisual-0.4.0-x86_64-2.txz
| | |-- libvisual-0.4.0-x86_64-2.txz.asc
| | |-- libvisual-plugins-0.4.0-x86_64-2.txt
| | |-- libvisual-plugins-0.4.0-x86_64-2.txz
| | |-- libvisual-plugins-0.4.0-x86_64-2.txz.asc
-| | |-- libvncserver-0.9.7-x86_64-1.txt
-| | |-- libvncserver-0.9.7-x86_64-1.txz
-| | |-- libvncserver-0.9.7-x86_64-1.txz.asc
-| | |-- libvorbis-1.2.0-x86_64-1.txt
-| | |-- libvorbis-1.2.0-x86_64-1.txz
-| | |-- libvorbis-1.2.0-x86_64-1.txz.asc
-| | |-- libwmf-0.2.8.4-x86_64-4.txt
-| | |-- libwmf-0.2.8.4-x86_64-4.txz
-| | |-- libwmf-0.2.8.4-x86_64-4.txz.asc
-| | |-- libwmf-docs-0.2.8.4-noarch-4.txt
-| | |-- libwmf-docs-0.2.8.4-noarch-4.txz
-| | |-- libwmf-docs-0.2.8.4-noarch-4.txz.asc
-| | |-- libwnck-2.26.1-x86_64-1.txt
-| | |-- libwnck-2.26.1-x86_64-1.txz
-| | |-- libwnck-2.26.1-x86_64-1.txz.asc
+| | |-- libvncserver-0.9.7-x86_64-2.txt
+| | |-- libvncserver-0.9.7-x86_64-2.txz
+| | |-- libvncserver-0.9.7-x86_64-2.txz.asc
+| | |-- libvorbis-1.2.3-x86_64-1.txt
+| | |-- libvorbis-1.2.3-x86_64-1.txz
+| | |-- libvorbis-1.2.3-x86_64-1.txz.asc
+| | |-- libwmf-0.2.8.4-x86_64-5.txt
+| | |-- libwmf-0.2.8.4-x86_64-5.txz
+| | |-- libwmf-0.2.8.4-x86_64-5.txz.asc
+| | |-- libwmf-docs-0.2.8.4-noarch-5.txt
+| | |-- libwmf-docs-0.2.8.4-noarch-5.txz
+| | |-- libwmf-docs-0.2.8.4-noarch-5.txz.asc
+| | |-- libwnck-2.28.0-x86_64-1.txt
+| | |-- libwnck-2.28.0-x86_64-1.txz
+| | |-- libwnck-2.28.0-x86_64-1.txz.asc
| | |-- libwpd-0.8.14-x86_64-1.txt
| | |-- libwpd-0.8.14-x86_64-1.txz
| | |-- libwpd-0.8.14-x86_64-1.txz.asc
-| | |-- libxklavier-3.9-x86_64-2.txt
-| | |-- libxklavier-3.9-x86_64-2.txz
-| | |-- libxklavier-3.9-x86_64-2.txz.asc
-| | |-- libxml2-2.7.3-x86_64-3.txt
-| | |-- libxml2-2.7.3-x86_64-3.txz
-| | |-- libxml2-2.7.3-x86_64-3.txz.asc
-| | |-- libxslt-1.1.24-x86_64-2.txt
-| | |-- libxslt-1.1.24-x86_64-2.txz
-| | |-- libxslt-1.1.24-x86_64-2.txz.asc
+| | |-- libxklavier-5.0-x86_64-1.txt
+| | |-- libxklavier-5.0-x86_64-1.txz
+| | |-- libxklavier-5.0-x86_64-1.txz.asc
+| | |-- libxml2-2.7.6-x86_64-1.txt
+| | |-- libxml2-2.7.6-x86_64-1.txz
+| | |-- libxml2-2.7.6-x86_64-1.txz.asc
+| | |-- libxslt-1.1.26-x86_64-1.txt
+| | |-- libxslt-1.1.26-x86_64-1.txz
+| | |-- libxslt-1.1.26-x86_64-1.txz.asc
| | |-- libzip-0.9-x86_64-2.txt
| | |-- libzip-0.9-x86_64-2.txz
| | |-- libzip-0.9-x86_64-2.txz.asc
+| | |-- loudmouth-1.4.3-x86_64-1.txt
+| | |-- loudmouth-1.4.3-x86_64-1.txz
+| | |-- loudmouth-1.4.3-x86_64-1.txz.asc
| | |-- lzo-2.02-x86_64-1.txt
| | |-- lzo-2.02-x86_64-1.txz
| | |-- lzo-2.02-x86_64-1.txz.asc
@@ -2037,66 +2101,75 @@ see additional documentation files. | | |-- mm-1.4.2-x86_64-2.txt
| | |-- mm-1.4.2-x86_64-2.txz
| | |-- mm-1.4.2-x86_64-2.txz.asc
-| | |-- mpfr-2.3.1-x86_64-1.txt
-| | |-- mpfr-2.3.1-x86_64-1.txz
-| | |-- mpfr-2.3.1-x86_64-1.txz.asc
+| | |-- mpfr-2.4.2p03-x86_64-1.txt
+| | |-- mpfr-2.4.2p03-x86_64-1.txz
+| | |-- mpfr-2.4.2p03-x86_64-1.txz.asc
| | |-- ncurses-5.7-x86_64-2.txt
| | |-- ncurses-5.7-x86_64-2.txz
| | |-- ncurses-5.7-x86_64-2.txz.asc
-| | |-- neon-0.28.4-x86_64-1.txt
-| | |-- neon-0.28.4-x86_64-1.txz
-| | |-- neon-0.28.4-x86_64-1.txz.asc
-| | |-- netpbm-10.35.22-x86_64-1.txt
-| | |-- netpbm-10.35.22-x86_64-1.txz
-| | |-- netpbm-10.35.22-x86_64-1.txz.asc
+| | |-- neon-0.29.0-x86_64-1.txt
+| | |-- neon-0.29.0-x86_64-1.txz
+| | |-- neon-0.29.0-x86_64-1.txz.asc
+| | |-- netpbm-10.49.02-x86_64-1.txt
+| | |-- netpbm-10.49.02-x86_64-1.txz
+| | |-- netpbm-10.49.02-x86_64-1.txz.asc
+| | |-- notify-python-0.1.1-x86_64-1.txt
+| | |-- notify-python-0.1.1-x86_64-1.txz
+| | |-- notify-python-0.1.1-x86_64-1.txz.asc
| | |-- openexr-1.6.1-x86_64-2.txt
| | |-- openexr-1.6.1-x86_64-2.txz
| | |-- openexr-1.6.1-x86_64-2.txz.asc
-| | |-- pango-1.22.4-x86_64-4.txt
-| | |-- pango-1.22.4-x86_64-4.txz
-| | |-- pango-1.22.4-x86_64-4.txz.asc
-| | |-- parted-1.8.8-x86_64-2.txt
-| | |-- parted-1.8.8-x86_64-2.txz
-| | |-- parted-1.8.8-x86_64-2.txz.asc
-| | |-- pcre-7.7-x86_64-1.txt
-| | |-- pcre-7.7-x86_64-1.txz
-| | |-- pcre-7.7-x86_64-1.txz.asc
-| | |-- phonon-4.3.1-x86_64-1.txt
-| | |-- phonon-4.3.1-x86_64-1.txz
-| | |-- phonon-4.3.1-x86_64-1.txz.asc
-| | |-- pil-1.1.6-x86_64-1.txt
-| | |-- pil-1.1.6-x86_64-1.txz
-| | |-- pil-1.1.6-x86_64-1.txz.asc
-| | |-- pilot-link-0.12.3-x86_64-9.txt
-| | |-- pilot-link-0.12.3-x86_64-9.txz
-| | |-- pilot-link-0.12.3-x86_64-9.txz.asc
-| | |-- poppler-0.10.7-x86_64-1.txt
-| | |-- poppler-0.10.7-x86_64-1.txz
-| | |-- poppler-0.10.7-x86_64-1.txz.asc
-| | |-- poppler-data-0.2.1-noarch-1.txt
-| | |-- poppler-data-0.2.1-noarch-1.txz
-| | |-- poppler-data-0.2.1-noarch-1.txz.asc
-| | |-- popt-1.7-x86_64-2.txt
-| | |-- popt-1.7-x86_64-2.txz
-| | |-- popt-1.7-x86_64-2.txz.asc
-| | |-- pycairo-1.8.4-x86_64-3.txt
-| | |-- pycairo-1.8.4-x86_64-3.txz
-| | |-- pycairo-1.8.4-x86_64-3.txz.asc
-| | |-- pycups-1.9.45-x86_64-2.txt
-| | |-- pycups-1.9.45-x86_64-2.txz
-| | |-- pycups-1.9.45-x86_64-2.txz.asc
-| | |-- pygobject-2.16.1-x86_64-1.txt
-| | |-- pygobject-2.16.1-x86_64-1.txz
-| | |-- pygobject-2.16.1-x86_64-1.txz.asc
-| | |-- pygtk-2.14.1-x86_64-2.txt
-| | |-- pygtk-2.14.1-x86_64-2.txz
-| | |-- pygtk-2.14.1-x86_64-2.txz.asc
+| | |-- pango-1.26.2-x86_64-1.txt
+| | |-- pango-1.26.2-x86_64-1.txz
+| | |-- pango-1.26.2-x86_64-1.txz.asc
+| | |-- parted-2.2-x86_64-1.txt
+| | |-- parted-2.2-x86_64-1.txz
+| | |-- parted-2.2-x86_64-1.txz.asc
+| | |-- pcre-8.02-x86_64-1.txt
+| | |-- pcre-8.02-x86_64-1.txz
+| | |-- pcre-8.02-x86_64-1.txz.asc
+| | |-- phonon-4.4.1-x86_64-1.txt
+| | |-- phonon-4.4.1-x86_64-1.txz
+| | |-- phonon-4.4.1-x86_64-1.txz.asc
+| | |-- pil-1.1.7-x86_64-1.txt
+| | |-- pil-1.1.7-x86_64-1.txz
+| | |-- pil-1.1.7-x86_64-1.txz.asc
+| | |-- pilot-link-0.12.5-x86_64-1.txt
+| | |-- pilot-link-0.12.5-x86_64-1.txz
+| | |-- pilot-link-0.12.5-x86_64-1.txz.asc
+| | |-- polkit-1_14bdfd8-x86_64-1.txt
+| | |-- polkit-1_14bdfd8-x86_64-1.txz
+| | |-- polkit-1_14bdfd8-x86_64-1.txz.asc
+| | |-- polkit-gnome-0.96-x86_64-1.txt
+| | |-- polkit-gnome-0.96-x86_64-1.txz
+| | |-- polkit-gnome-0.96-x86_64-1.txz.asc
+| | |-- poppler-0.12.4-x86_64-1.txt
+| | |-- poppler-0.12.4-x86_64-1.txz
+| | |-- poppler-0.12.4-x86_64-1.txz.asc
+| | |-- poppler-data-0.4.0-noarch-1.txt
+| | |-- poppler-data-0.4.0-noarch-1.txz
+| | |-- poppler-data-0.4.0-noarch-1.txz.asc
+| | |-- popt-1.7-x86_64-3.txt
+| | |-- popt-1.7-x86_64-3.txz
+| | |-- popt-1.7-x86_64-3.txz.asc
+| | |-- pycairo-1.8.8-x86_64-1.txt
+| | |-- pycairo-1.8.8-x86_64-1.txz
+| | |-- pycairo-1.8.8-x86_64-1.txz.asc
+| | |-- pycups-1.9.48-x86_64-1.txt
+| | |-- pycups-1.9.48-x86_64-1.txz
+| | |-- pycups-1.9.48-x86_64-1.txz.asc
+| | |-- pygobject-2.20.0-x86_64-1.txt
+| | |-- pygobject-2.20.0-x86_64-1.txz
+| | |-- pygobject-2.20.0-x86_64-1.txz.asc
+| | |-- pygtk-2.16.0-x86_64-1.txt
+| | |-- pygtk-2.16.0-x86_64-1.txz
+| | |-- pygtk-2.16.0-x86_64-1.txz.asc
| | |-- pyrex-0.9.8.5-x86_64-2.txt
| | |-- pyrex-0.9.8.5-x86_64-2.txz
| | |-- pyrex-0.9.8.5-x86_64-2.txz.asc
-| | |-- qca-2.0.1-x86_64-1.txt
-| | |-- qca-2.0.1-x86_64-1.txz
-| | |-- qca-2.0.1-x86_64-1.txz.asc
+| | |-- qca-2.0.2-x86_64-1.txt
+| | |-- qca-2.0.2-x86_64-1.txz
+| | |-- qca-2.0.2-x86_64-1.txz.asc
| | |-- qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txt
| | |-- qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txz
| | |-- qca-cyrus-sasl-2.0.0_beta3-x86_64-1.txz.asc
@@ -2109,110 +2182,119 @@ see additional documentation files. | | |-- qimageblitz-r948358-x86_64-1.txt
| | |-- qimageblitz-r948358-x86_64-1.txz
| | |-- qimageblitz-r948358-x86_64-1.txz.asc
-| | |-- qt-r1008952-x86_64-1.txt
-| | |-- qt-r1008952-x86_64-1.txz
-| | |-- qt-r1008952-x86_64-1.txz.asc
-| | |-- qtscriptgenerator-0.1.0-x86_64-1.txt
-| | |-- qtscriptgenerator-0.1.0-x86_64-1.txz
-| | |-- qtscriptgenerator-0.1.0-x86_64-1.txz.asc
-| | |-- raptor-1.4.18-x86_64-1.txt
-| | |-- raptor-1.4.18-x86_64-1.txz
-| | |-- raptor-1.4.18-x86_64-1.txz.asc
-| | |-- rasqal-0.9.16-x86_64-1.txt
-| | |-- rasqal-0.9.16-x86_64-1.txz
-| | |-- rasqal-0.9.16-x86_64-1.txz.asc
+| | |-- qt-4.6.2_2d3d3e5-x86_64-1.txt
+| | |-- qt-4.6.2_2d3d3e5-x86_64-1.txz
+| | |-- qt-4.6.2_2d3d3e5-x86_64-1.txz.asc
+| | |-- qtscriptgenerator-0.1.0-x86_64-2.txt
+| | |-- qtscriptgenerator-0.1.0-x86_64-2.txz
+| | |-- qtscriptgenerator-0.1.0-x86_64-2.txz.asc
+| | |-- raptor-1.4.21-x86_64-1.txt
+| | |-- raptor-1.4.21-x86_64-1.txz
+| | |-- raptor-1.4.21-x86_64-1.txz.asc
+| | |-- rasqal-0.9.19-x86_64-1.txt
+| | |-- rasqal-0.9.19-x86_64-1.txz
+| | |-- rasqal-0.9.19-x86_64-1.txz.asc
| | |-- readline-5.2-x86_64-4.txt
| | |-- readline-5.2-x86_64-4.txz
| | |-- readline-5.2-x86_64-4.txz.asc
-| | |-- redland-1.0.8-x86_64-1.txt
-| | |-- redland-1.0.8-x86_64-1.txz
-| | |-- redland-1.0.8-x86_64-1.txz.asc
-| | |-- sdl-1.2.13-x86_64-4.txt
-| | |-- sdl-1.2.13-x86_64-4.txz
-| | |-- sdl-1.2.13-x86_64-4.txz.asc
-| | |-- seamonkey-solibs-1.1.17-x86_64-1.txt
-| | |-- seamonkey-solibs-1.1.17-x86_64-1.txz
-| | |-- seamonkey-solibs-1.1.17-x86_64-1.txz.asc
-| | |-- shared-mime-info-0.60-x86_64-1.txt
-| | |-- shared-mime-info-0.60-x86_64-1.txz
-| | |-- shared-mime-info-0.60-x86_64-1.txz.asc
-| | |-- sip-4.7.9-x86_64-2.txt
-| | |-- sip-4.7.9-x86_64-2.txz
-| | |-- sip-4.7.9-x86_64-2.txz.asc
-| | |-- slang-2.1.4-x86_64-1.txt
-| | |-- slang-2.1.4-x86_64-1.txz
-| | |-- slang-2.1.4-x86_64-1.txz.asc
+| | |-- redland-1.0.10-x86_64-1.txt
+| | |-- redland-1.0.10-x86_64-1.txz
+| | |-- redland-1.0.10-x86_64-1.txz.asc
+| | |-- sdl-1.2.14-x86_64-2.txt
+| | |-- sdl-1.2.14-x86_64-2.txz
+| | |-- sdl-1.2.14-x86_64-2.txz.asc
+| | |-- seamonkey-solibs-2.0.4-x86_64-1.txt
+| | |-- seamonkey-solibs-2.0.4-x86_64-1.txz
+| | |-- seamonkey-solibs-2.0.4-x86_64-1.txz.asc
+| | |-- shared-desktop-ontologies-0.3-x86_64-1.txt
+| | |-- shared-desktop-ontologies-0.3-x86_64-1.txz
+| | |-- shared-desktop-ontologies-0.3-x86_64-1.txz.asc
+| | |-- shared-mime-info-0.71-x86_64-1.txt
+| | |-- shared-mime-info-0.71-x86_64-1.txz
+| | |-- shared-mime-info-0.71-x86_64-1.txz.asc
+| | |-- sip-4.10.2-x86_64-1.txt
+| | |-- sip-4.10.2-x86_64-1.txz
+| | |-- sip-4.10.2-x86_64-1.txz.asc
+| | |-- slang-2.2.2-x86_64-1.txt
+| | |-- slang-2.2.2-x86_64-1.txz
+| | |-- slang-2.2.2-x86_64-1.txz.asc
| | |-- slang1-1.4.9-x86_64-1.txt
| | |-- slang1-1.4.9-x86_64-1.txz
| | |-- slang1-1.4.9-x86_64-1.txz.asc
-| | |-- soprano-2.2.3-x86_64-1.txt
-| | |-- soprano-2.2.3-x86_64-1.txz
-| | |-- soprano-2.2.3-x86_64-1.txz.asc
-| | |-- startup-notification-0.9-x86_64-2.txt
-| | |-- startup-notification-0.9-x86_64-2.txz
-| | |-- startup-notification-0.9-x86_64-2.txz.asc
-| | |-- strigi-0.6.4-x86_64-1.txt
-| | |-- strigi-0.6.4-x86_64-1.txz
-| | |-- strigi-0.6.4-x86_64-1.txz.asc
+| | |-- soprano-2.4.3-x86_64-1.txt
+| | |-- soprano-2.4.3-x86_64-1.txz
+| | |-- soprano-2.4.3-x86_64-1.txz.asc
+| | |-- startup-notification-0.10-x86_64-1.txt
+| | |-- startup-notification-0.10-x86_64-1.txz
+| | |-- startup-notification-0.10-x86_64-1.txz.asc
+| | |-- strigi-0.7.2-x86_64-1.txt
+| | |-- strigi-0.7.2-x86_64-1.txz
+| | |-- strigi-0.7.2-x86_64-1.txz.asc
| | |-- svgalib-1.9.25-x86_64-2.txt
| | |-- svgalib-1.9.25-x86_64-2.txz
| | |-- svgalib-1.9.25-x86_64-2.txz.asc
+| | |-- system-config-printer-1.2.2-x86_64-1.txt
+| | |-- system-config-printer-1.2.2-x86_64-1.txz
+| | |-- system-config-printer-1.2.2-x86_64-1.txz.asc
| | |-- t1lib-5.1.2-x86_64-1.txt
| | |-- t1lib-5.1.2-x86_64-1.txz
| | |-- t1lib-5.1.2-x86_64-1.txz.asc
| | |-- tagfile
-| | |-- taglib-1.5-x86_64-1.txt
-| | |-- taglib-1.5-x86_64-1.txz
-| | |-- taglib-1.5-x86_64-1.txz.asc
-| | |-- taglib-extras-0.1.3-x86_64-1.txt
-| | |-- taglib-extras-0.1.3-x86_64-1.txz
-| | |-- taglib-extras-0.1.3-x86_64-1.txz.asc
+| | |-- taglib-1.6.2-x86_64-1.txt
+| | |-- taglib-1.6.2-x86_64-1.txz
+| | |-- taglib-1.6.2-x86_64-1.txz.asc
+| | |-- taglib-extras-1.0.1-x86_64-1.txt
+| | |-- taglib-extras-1.0.1-x86_64-1.txz
+| | |-- taglib-extras-1.0.1-x86_64-1.txz.asc
| | |-- tango-icon-theme-0.8.90-noarch-1.txt
| | |-- tango-icon-theme-0.8.90-noarch-1.txz
| | |-- tango-icon-theme-0.8.90-noarch-1.txz.asc
| | |-- tango-icon-theme-extras-0.1.0-noarch-1.txt
| | |-- tango-icon-theme-extras-0.1.0-noarch-1.txz
| | |-- tango-icon-theme-extras-0.1.0-noarch-1.txz.asc
-| | |-- urwid-0.9.8.4-x86_64-1.txt
-| | |-- urwid-0.9.8.4-x86_64-1.txz
-| | |-- urwid-0.9.8.4-x86_64-1.txz.asc
-| | |-- vte-0.20.5-x86_64-1.txt
-| | |-- vte-0.20.5-x86_64-1.txz
-| | |-- vte-0.20.5-x86_64-1.txz.asc
+| | |-- urwid-0.9.9.1-x86_64-1.txt
+| | |-- urwid-0.9.9.1-x86_64-1.txz
+| | |-- urwid-0.9.9.1-x86_64-1.txz.asc
+| | |-- v4l-utils-0.8.0-x86_64-1.txt
+| | |-- v4l-utils-0.8.0-x86_64-1.txz
+| | |-- v4l-utils-0.8.0-x86_64-1.txz.asc
+| | |-- virtuoso-ose-6.1.1-x86_64-1.txt
+| | |-- virtuoso-ose-6.1.1-x86_64-1.txz
+| | |-- virtuoso-ose-6.1.1-x86_64-1.txz.asc
+| | |-- vte-0.24.1-x86_64-1.txt
+| | |-- vte-0.24.1-x86_64-1.txz
+| | |-- vte-0.24.1-x86_64-1.txz.asc
| | |-- wavpack-4.41.0-x86_64-1.txt
| | |-- wavpack-4.41.0-x86_64-1.txz
| | |-- wavpack-4.41.0-x86_64-1.txz.asc
-| | |-- wv2-0.2.3-x86_64-1.txt
-| | |-- wv2-0.2.3-x86_64-1.txz
-| | |-- wv2-0.2.3-x86_64-1.txz.asc
+| | |-- wv2-0.4.2-x86_64-1.txt
+| | |-- wv2-0.4.2-x86_64-1.txz
+| | |-- wv2-0.4.2-x86_64-1.txz.asc
| | |-- zlib-1.2.3-x86_64-2.txt
| | |-- zlib-1.2.3-x86_64-2.txz
| | `-- zlib-1.2.3-x86_64-2.txz.asc
| |-- n
-| | |-- alpine-2.00-x86_64-2.txt
-| | |-- alpine-2.00-x86_64-2.txz
-| | |-- alpine-2.00-x86_64-2.txz.asc
-| | |-- autofs-3.1.7-x86_64-1.txt
-| | |-- autofs-3.1.7-x86_64-1.txz
-| | |-- autofs-3.1.7-x86_64-1.txz.asc
+| | |-- alpine-2.00-x86_64-3.txt
+| | |-- alpine-2.00-x86_64-3.txz
+| | |-- alpine-2.00-x86_64-3.txz.asc
+| | |-- autofs-5.0.5-x86_64-1.txt
+| | |-- autofs-5.0.5-x86_64-1.txz
+| | |-- autofs-5.0.5-x86_64-1.txz.asc
| | |-- biff+comsat-0.17-x86_64-1.txt
| | |-- biff+comsat-0.17-x86_64-1.txz
| | |-- biff+comsat-0.17-x86_64-1.txz.asc
-| | |-- bind-9.4.3_P3-x86_64-1.txt
-| | |-- bind-9.4.3_P3-x86_64-1.txz
-| | |-- bind-9.4.3_P3-x86_64-1.txz.asc
+| | |-- bind-9.4.3_P4-x86_64-1.txt
+| | |-- bind-9.4.3_P4-x86_64-1.txz
+| | |-- bind-9.4.3_P4-x86_64-1.txz.asc
+| | |-- bluez-4.64-x86_64-1.txt
+| | |-- bluez-4.64-x86_64-1.txz
+| | |-- bluez-4.64-x86_64-1.txz.asc
| | |-- bluez-firmware-1.2-x86_64-1.txt
| | |-- bluez-firmware-1.2-x86_64-1.txz
| | |-- bluez-firmware-1.2-x86_64-1.txz.asc
-| | |-- bluez-hcidump-1.42-x86_64-2.txt
-| | |-- bluez-hcidump-1.42-x86_64-2.txz
-| | |-- bluez-hcidump-1.42-x86_64-2.txz.asc
-| | |-- bluez-libs-3.36-x86_64-2.txt
-| | |-- bluez-libs-3.36-x86_64-2.txz
-| | |-- bluez-libs-3.36-x86_64-2.txz.asc
-| | |-- bluez-utils-3.36-x86_64-7.txt
-| | |-- bluez-utils-3.36-x86_64-7.txz
-| | |-- bluez-utils-3.36-x86_64-7.txz.asc
+| | |-- bluez-hcidump-1.42-x86_64-3.txt
+| | |-- bluez-hcidump-1.42-x86_64-3.txz
+| | |-- bluez-hcidump-1.42-x86_64-3.txz.asc
| | |-- bootp-2.4.3-x86_64-2.txt
| | |-- bootp-2.4.3-x86_64-2.txz
| | |-- bootp-2.4.3-x86_64-2.txz.asc
@@ -2222,63 +2304,63 @@ see additional documentation files. | | |-- bsd-finger-0.17-x86_64-1.txt
| | |-- bsd-finger-0.17-x86_64-1.txz
| | |-- bsd-finger-0.17-x86_64-1.txz.asc
-| | |-- crda-1.0.1-x86_64-2.txt
-| | |-- crda-1.0.1-x86_64-2.txz
-| | |-- crda-1.0.1-x86_64-2.txz.asc
-| | |-- curl-7.19.6-x86_64-1.txt
-| | |-- curl-7.19.6-x86_64-1.txz
-| | |-- curl-7.19.6-x86_64-1.txz.asc
+| | |-- crda-1.1.1-x86_64-1.txt
+| | |-- crda-1.1.1-x86_64-1.txz
+| | |-- crda-1.1.1-x86_64-1.txz.asc
+| | |-- curl-7.20.1-x86_64-1.txt
+| | |-- curl-7.20.1-x86_64-1.txz
+| | |-- curl-7.20.1-x86_64-1.txz.asc
| | |-- cyrus-sasl-2.1.23-x86_64-1.txt
| | |-- cyrus-sasl-2.1.23-x86_64-1.txz
| | |-- cyrus-sasl-2.1.23-x86_64-1.txz.asc
-| | |-- dhcp-3.1.2p1-x86_64-1.txt
-| | |-- dhcp-3.1.2p1-x86_64-1.txz
-| | |-- dhcp-3.1.2p1-x86_64-1.txz.asc
-| | |-- dhcpcd-3.2.3-x86_64-1.txt
-| | |-- dhcpcd-3.2.3-x86_64-1.txz
-| | |-- dhcpcd-3.2.3-x86_64-1.txz.asc
-| | |-- dirmngr-1.0.3-x86_64-1.txt
-| | |-- dirmngr-1.0.3-x86_64-1.txz
-| | |-- dirmngr-1.0.3-x86_64-1.txz.asc
-| | |-- dnsmasq-2.49-x86_64-1.txt
-| | |-- dnsmasq-2.49-x86_64-1.txz
-| | |-- dnsmasq-2.49-x86_64-1.txz.asc
+| | |-- dhcp-4.1.1-x86_64-2.txt
+| | |-- dhcp-4.1.1-x86_64-2.txz
+| | |-- dhcp-4.1.1-x86_64-2.txz.asc
+| | |-- dhcpcd-5.2.2-x86_64-1.txt
+| | |-- dhcpcd-5.2.2-x86_64-1.txz
+| | |-- dhcpcd-5.2.2-x86_64-1.txz.asc
+| | |-- dirmngr-1.0.3-x86_64-2.txt
+| | |-- dirmngr-1.0.3-x86_64-2.txz
+| | |-- dirmngr-1.0.3-x86_64-2.txz.asc
+| | |-- dnsmasq-2.52-x86_64-1.txt
+| | |-- dnsmasq-2.52-x86_64-1.txz
+| | |-- dnsmasq-2.52-x86_64-1.txz.asc
| | |-- elm-2.5.8-x86_64-3.txt
| | |-- elm-2.5.8-x86_64-3.txz
| | |-- elm-2.5.8-x86_64-3.txz.asc
-| | |-- epic4-2.8-x86_64-2.txt
-| | |-- epic4-2.8-x86_64-2.txz
-| | |-- epic4-2.8-x86_64-2.txz.asc
-| | |-- ethtool-6-x86_64-1.txt
-| | |-- ethtool-6-x86_64-1.txz
-| | |-- ethtool-6-x86_64-1.txz.asc
-| | |-- fetchmail-6.3.11-x86_64-1.txt
-| | |-- fetchmail-6.3.11-x86_64-1.txz
-| | |-- fetchmail-6.3.11-x86_64-1.txz.asc
-| | |-- getmail-4.11.0-x86_64-1.txt
-| | |-- getmail-4.11.0-x86_64-1.txz
-| | |-- getmail-4.11.0-x86_64-1.txz.asc
-| | |-- gnupg-1.4.9-x86_64-1.txt
-| | |-- gnupg-1.4.9-x86_64-1.txz
-| | |-- gnupg-1.4.9-x86_64-1.txz.asc
-| | |-- gnupg2-2.0.12-x86_64-1.txt
-| | |-- gnupg2-2.0.12-x86_64-1.txz
-| | |-- gnupg2-2.0.12-x86_64-1.txz.asc
-| | |-- gnutls-2.6.6-x86_64-2.txt
-| | |-- gnutls-2.6.6-x86_64-2.txz
-| | |-- gnutls-2.6.6-x86_64-2.txz.asc
+| | |-- epic5-1.1.2-x86_64-1.txt
+| | |-- epic5-1.1.2-x86_64-1.txz
+| | |-- epic5-1.1.2-x86_64-1.txz.asc
+| | |-- ethtool-2.6.33-x86_64-1.txt
+| | |-- ethtool-2.6.33-x86_64-1.txz
+| | |-- ethtool-2.6.33-x86_64-1.txz.asc
+| | |-- fetchmail-6.3.17-x86_64-1.txt
+| | |-- fetchmail-6.3.17-x86_64-1.txz
+| | |-- fetchmail-6.3.17-x86_64-1.txz.asc
+| | |-- getmail-4.17.0-x86_64-1.txt
+| | |-- getmail-4.17.0-x86_64-1.txz
+| | |-- getmail-4.17.0-x86_64-1.txz.asc
+| | |-- gnupg-1.4.10-x86_64-1.txt
+| | |-- gnupg-1.4.10-x86_64-1.txz
+| | |-- gnupg-1.4.10-x86_64-1.txz.asc
+| | |-- gnupg2-2.0.14-x86_64-2.txt
+| | |-- gnupg2-2.0.14-x86_64-2.txz
+| | |-- gnupg2-2.0.14-x86_64-2.txz.asc
+| | |-- gnutls-2.8.6-x86_64-1.txt
+| | |-- gnutls-2.8.6-x86_64-1.txz
+| | |-- gnutls-2.8.6-x86_64-1.txz.asc
| | |-- gpa-0.7.5-x86_64-1.txt
| | |-- gpa-0.7.5-x86_64-1.txz
| | |-- gpa-0.7.5-x86_64-1.txz.asc
-| | |-- gpgme-1.1.8-x86_64-1.txt
-| | |-- gpgme-1.1.8-x86_64-1.txz
-| | |-- gpgme-1.1.8-x86_64-1.txz.asc
+| | |-- gpgme-1.2.0-x86_64-1.txt
+| | |-- gpgme-1.2.0-x86_64-1.txz
+| | |-- gpgme-1.2.0-x86_64-1.txz.asc
| | |-- htdig-3.2.0b6-x86_64-3.txt
| | |-- htdig-3.2.0b6-x86_64-3.txz
| | |-- htdig-3.2.0b6-x86_64-3.txz.asc
-| | |-- httpd-2.2.13-x86_64-1.txt
-| | |-- httpd-2.2.13-x86_64-1.txz
-| | |-- httpd-2.2.13-x86_64-1.txz.asc
+| | |-- httpd-2.2.15-x86_64-1.txt
+| | |-- httpd-2.2.15-x86_64-1.txz
+| | |-- httpd-2.2.15-x86_64-1.txz.asc
| | |-- icmpinfo-1.11-x86_64-1.txt
| | |-- icmpinfo-1.11-x86_64-1.txz
| | |-- icmpinfo-1.11-x86_64-1.txz.asc
@@ -2290,30 +2372,33 @@ see additional documentation files. | | |-- inetd-1.79s-x86_64-8.txz.asc
| | |-- install-packages
| | |-- install.end
-| | |-- iproute2-2.6.29_1-x86_64-2.txt
-| | |-- iproute2-2.6.29_1-x86_64-2.txz
-| | |-- iproute2-2.6.29_1-x86_64-2.txz.asc
-| | |-- iptables-1.4.3.2-x86_64-1.txt
-| | |-- iptables-1.4.3.2-x86_64-1.txz
-| | |-- iptables-1.4.3.2-x86_64-1.txz.asc
+| | |-- iproute2-2.6.33-x86_64-1.txt
+| | |-- iproute2-2.6.33-x86_64-1.txz
+| | |-- iproute2-2.6.33-x86_64-1.txz.asc
+| | |-- iptables-1.4.7-x86_64-1.txt
+| | |-- iptables-1.4.7-x86_64-1.txz
+| | |-- iptables-1.4.7-x86_64-1.txz.asc
| | |-- iptraf-3.0.0-x86_64-3.txt
| | |-- iptraf-3.0.0-x86_64-3.txz
| | |-- iptraf-3.0.0-x86_64-3.txz.asc
-| | |-- iputils-s20070202-x86_64-2.txt
-| | |-- iputils-s20070202-x86_64-2.txz
-| | |-- iputils-s20070202-x86_64-2.txz.asc
+| | |-- iputils-s20100418-x86_64-1.txt
+| | |-- iputils-s20100418-x86_64-1.txz
+| | |-- iputils-s20100418-x86_64-1.txz.asc
| | |-- ipw2100-fw-1.3-fw-1.txt
| | |-- ipw2100-fw-1.3-fw-1.txz
| | |-- ipw2100-fw-1.3-fw-1.txz.asc
-| | |-- ipw2200-fw-3.0-fw-2.txt
-| | |-- ipw2200-fw-3.0-fw-2.txz
-| | |-- ipw2200-fw-3.0-fw-2.txz.asc
-| | |-- irssi-0.8.14-x86_64-1.txt
-| | |-- irssi-0.8.14-x86_64-1.txz
-| | |-- irssi-0.8.14-x86_64-1.txz.asc
+| | |-- ipw2200-fw-3.1-fw-1.txt
+| | |-- ipw2200-fw-3.1-fw-1.txz
+| | |-- ipw2200-fw-3.1-fw-1.txz.asc
+| | |-- irssi-0.8.15-x86_64-1.txt
+| | |-- irssi-0.8.15-x86_64-1.txz
+| | |-- irssi-0.8.15-x86_64-1.txz.asc
| | |-- iw-0.9.14-x86_64-1.txt
| | |-- iw-0.9.14-x86_64-1.txz
| | |-- iw-0.9.14-x86_64-1.txz.asc
+| | |-- iwlwifi-1000-ucode-128.50.3.1-fw-1.txt
+| | |-- iwlwifi-1000-ucode-128.50.3.1-fw-1.txz
+| | |-- iwlwifi-1000-ucode-128.50.3.1-fw-1.txz.asc
| | |-- iwlwifi-3945-ucode-15.32.2.9-fw-1.txt
| | |-- iwlwifi-3945-ucode-15.32.2.9-fw-1.txz
| | |-- iwlwifi-3945-ucode-15.32.2.9-fw-1.txz.asc
@@ -2326,59 +2411,62 @@ see additional documentation files. | | |-- iwlwifi-5150-ucode-8.24.2.2-fw-1.txt
| | |-- iwlwifi-5150-ucode-8.24.2.2-fw-1.txz
| | |-- iwlwifi-5150-ucode-8.24.2.2-fw-1.txz.asc
-| | |-- lftp-3.7.14-x86_64-1.txt
-| | |-- lftp-3.7.14-x86_64-1.txz
-| | |-- lftp-3.7.14-x86_64-1.txz.asc
-| | |-- libassuan-1.0.4-x86_64-1.txt
-| | |-- libassuan-1.0.4-x86_64-1.txz
-| | |-- libassuan-1.0.4-x86_64-1.txz.asc
-| | |-- libgcrypt-1.4.4-x86_64-1.txt
-| | |-- libgcrypt-1.4.4-x86_64-1.txz
-| | |-- libgcrypt-1.4.4-x86_64-1.txz.asc
-| | |-- libgpg-error-1.7-x86_64-1.txt
-| | |-- libgpg-error-1.7-x86_64-1.txz
-| | |-- libgpg-error-1.7-x86_64-1.txz.asc
-| | |-- libksba-1.0.6-x86_64-1.txt
-| | |-- libksba-1.0.6-x86_64-1.txz
-| | |-- libksba-1.0.6-x86_64-1.txz.asc
-| | |-- links-2.2-x86_64-1.txt
-| | |-- links-2.2-x86_64-1.txz
-| | |-- links-2.2-x86_64-1.txz.asc
-| | |-- lynx-2.8.6rel.5-x86_64-2.txt
-| | |-- lynx-2.8.6rel.5-x86_64-2.txz
-| | |-- lynx-2.8.6rel.5-x86_64-2.txz.asc
+| | |-- iwlwifi-6000-ucode-9.193.4.1-fw-1.txt
+| | |-- iwlwifi-6000-ucode-9.193.4.1-fw-1.txz
+| | |-- iwlwifi-6000-ucode-9.193.4.1-fw-1.txz.asc
+| | |-- lftp-4.0.7-x86_64-1.txt
+| | |-- lftp-4.0.7-x86_64-1.txz
+| | |-- lftp-4.0.7-x86_64-1.txz.asc
+| | |-- libassuan-1.0.5-x86_64-1.txt
+| | |-- libassuan-1.0.5-x86_64-1.txz
+| | |-- libassuan-1.0.5-x86_64-1.txz.asc
+| | |-- libgcrypt-1.4.5-x86_64-2.txt
+| | |-- libgcrypt-1.4.5-x86_64-2.txz
+| | |-- libgcrypt-1.4.5-x86_64-2.txz.asc
+| | |-- libgpg-error-1.7-x86_64-2.txt
+| | |-- libgpg-error-1.7-x86_64-2.txz
+| | |-- libgpg-error-1.7-x86_64-2.txz.asc
+| | |-- libksba-1.0.7-x86_64-1.txt
+| | |-- libksba-1.0.7-x86_64-1.txz
+| | |-- libksba-1.0.7-x86_64-1.txz.asc
+| | |-- links-2.3pre1-x86_64-1.txt
+| | |-- links-2.3pre1-x86_64-1.txz
+| | |-- links-2.3pre1-x86_64-1.txz.asc
+| | |-- lynx-2.8.7-x86_64-1.txt
+| | |-- lynx-2.8.7-x86_64-1.txz
+| | |-- lynx-2.8.7-x86_64-1.txz.asc
| | |-- mailx-12.4-x86_64-1.txt
| | |-- mailx-12.4-x86_64-1.txz
| | |-- mailx-12.4-x86_64-1.txz.asc
| | |-- maketag
| | |-- maketag.ez
-| | |-- mcabber-0.9.9-x86_64-2.txt
-| | |-- mcabber-0.9.9-x86_64-2.txz
-| | |-- mcabber-0.9.9-x86_64-2.txz.asc
+| | |-- mcabber-0.10.0-x86_64-1.txt
+| | |-- mcabber-0.10.0-x86_64-1.txz
+| | |-- mcabber-0.10.0-x86_64-1.txz.asc
| | |-- metamail-2.7-x86_64-4.txt
| | |-- metamail-2.7-x86_64-4.txz
| | |-- metamail-2.7-x86_64-4.txz.asc
-| | |-- mtr-0.73-x86_64-2.txt
-| | |-- mtr-0.73-x86_64-2.txz
-| | |-- mtr-0.73-x86_64-2.txz.asc
+| | |-- mtr-0.75-x86_64-1.txt
+| | |-- mtr-0.75-x86_64-1.txz
+| | |-- mtr-0.75-x86_64-1.txz.asc
| | |-- mutt-1.4.2.3-x86_64-2.txt
| | |-- mutt-1.4.2.3-x86_64-2.txz
| | |-- mutt-1.4.2.3-x86_64-2.txz.asc
| | |-- nc-1.10-x86_64-1.txt
| | |-- nc-1.10-x86_64-1.txz
| | |-- nc-1.10-x86_64-1.txz.asc
-| | |-- ncftp-3.2.2-x86_64-2.txt
-| | |-- ncftp-3.2.2-x86_64-2.txz
-| | |-- ncftp-3.2.2-x86_64-2.txz.asc
-| | |-- net-snmp-5.4.2.1-x86_64-2.txt
-| | |-- net-snmp-5.4.2.1-x86_64-2.txz
-| | |-- net-snmp-5.4.2.1-x86_64-2.txz.asc
+| | |-- ncftp-3.2.4-x86_64-1.txt
+| | |-- ncftp-3.2.4-x86_64-1.txz
+| | |-- ncftp-3.2.4-x86_64-1.txz.asc
+| | |-- net-snmp-5.5-x86_64-2.txt
+| | |-- net-snmp-5.5-x86_64-2.txz
+| | |-- net-snmp-5.5-x86_64-2.txz.asc
| | |-- net-tools-1.60-x86_64-2.txt
| | |-- net-tools-1.60-x86_64-2.txz
| | |-- net-tools-1.60-x86_64-2.txz.asc
-| | |-- netatalk-2.0.4-x86_64-2.txt
-| | |-- netatalk-2.0.4-x86_64-2.txz
-| | |-- netatalk-2.0.4-x86_64-2.txz.asc
+| | |-- netatalk-2.0.5-x86_64-1.txt
+| | |-- netatalk-2.0.5-x86_64-1.txz
+| | |-- netatalk-2.0.5-x86_64-1.txz.asc
| | |-- netdate-bsd4-x86_64-1.txt
| | |-- netdate-bsd4-x86_64-1.txz
| | |-- netdate-bsd4-x86_64-1.txz.asc
@@ -2415,127 +2503,139 @@ see additional documentation files. | | |-- netwatch-1.3.0-x86_64-2.txt
| | |-- netwatch-1.3.0-x86_64-2.txz
| | |-- netwatch-1.3.0-x86_64-2.txz.asc
-| | |-- network-scripts-13.0-noarch-2.txt
-| | |-- network-scripts-13.0-noarch-2.txz
-| | |-- network-scripts-13.0-noarch-2.txz.asc
+| | |-- network-scripts-13.0-noarch-3.txt
+| | |-- network-scripts-13.0-noarch-3.txz
+| | |-- network-scripts-13.0-noarch-3.txz.asc
| | |-- netwrite-0.17-x86_64-1.txt
| | |-- netwrite-0.17-x86_64-1.txz
| | |-- netwrite-0.17-x86_64-1.txz.asc
| | |-- newspost-2.1.1-x86_64-1.txt
| | |-- newspost-2.1.1-x86_64-1.txz
| | |-- newspost-2.1.1-x86_64-1.txz.asc
-| | |-- nfs-utils-1.1.4-x86_64-1.txt
-| | |-- nfs-utils-1.1.4-x86_64-1.txz
-| | |-- nfs-utils-1.1.4-x86_64-1.txz.asc
-| | |-- nmap-5.00-x86_64-1.txt
-| | |-- nmap-5.00-x86_64-1.txz
-| | |-- nmap-5.00-x86_64-1.txz.asc
-| | |-- nn-6.7.3-x86_64-2.txt
-| | |-- nn-6.7.3-x86_64-2.txz
-| | |-- nn-6.7.3-x86_64-2.txz.asc
-| | |-- ntp-4.2.4p7-x86_64-1.txt
-| | |-- ntp-4.2.4p7-x86_64-1.txz
-| | |-- ntp-4.2.4p7-x86_64-1.txz.asc
-| | |-- obexftp-0.23-x86_64-1.txt
-| | |-- obexftp-0.23-x86_64-1.txz
-| | |-- obexftp-0.23-x86_64-1.txz.asc
-| | |-- openldap-client-2.3.43-x86_64-1.txt
-| | |-- openldap-client-2.3.43-x86_64-1.txz
-| | |-- openldap-client-2.3.43-x86_64-1.txz.asc
-| | |-- openobex-1.3-x86_64-3.txt
-| | |-- openobex-1.3-x86_64-3.txz
-| | |-- openobex-1.3-x86_64-3.txz.asc
-| | |-- openssh-5.2p1-x86_64-2.txt
-| | |-- openssh-5.2p1-x86_64-2.txz
-| | |-- openssh-5.2p1-x86_64-2.txz.asc
-| | |-- openssl-0.9.8k-x86_64-2.txt
-| | |-- openssl-0.9.8k-x86_64-2.txz
-| | |-- openssl-0.9.8k-x86_64-2.txz.asc
-| | |-- openvpn-2.0.9-x86_64-1.txt
-| | |-- openvpn-2.0.9-x86_64-1.txz
-| | |-- openvpn-2.0.9-x86_64-1.txz.asc
-| | |-- php-5.2.10-x86_64-2.txt
-| | |-- php-5.2.10-x86_64-2.txz
-| | |-- php-5.2.10-x86_64-2.txz.asc
+| | |-- nfs-utils-1.2.2-x86_64-1.txt
+| | |-- nfs-utils-1.2.2-x86_64-1.txz
+| | |-- nfs-utils-1.2.2-x86_64-1.txz.asc
+| | |-- nmap-5.21-x86_64-1.txt
+| | |-- nmap-5.21-x86_64-1.txz
+| | |-- nmap-5.21-x86_64-1.txz.asc
+| | |-- nn-6.7.3-x86_64-3.txt
+| | |-- nn-6.7.3-x86_64-3.txz
+| | |-- nn-6.7.3-x86_64-3.txz.asc
+| | |-- ntp-4.2.6p1-x86_64-1.txt
+| | |-- ntp-4.2.6p1-x86_64-1.txz
+| | |-- ntp-4.2.6p1-x86_64-1.txz.asc
+| | |-- obex-data-server-0.4.5-x86_64-1.txt
+| | |-- obex-data-server-0.4.5-x86_64-1.txz
+| | |-- obex-data-server-0.4.5-x86_64-1.txz.asc
+| | |-- obexfs-0.12-x86_64-1.txt
+| | |-- obexfs-0.12-x86_64-1.txz
+| | |-- obexfs-0.12-x86_64-1.txz.asc
+| | |-- obexftp-0.23-x86_64-3.txt
+| | |-- obexftp-0.23-x86_64-3.txz
+| | |-- obexftp-0.23-x86_64-3.txz.asc
+| | |-- openldap-client-2.4.21-x86_64-1.txt
+| | |-- openldap-client-2.4.21-x86_64-1.txz
+| | |-- openldap-client-2.4.21-x86_64-1.txz.asc
+| | |-- openobex-1.5-x86_64-1.txt
+| | |-- openobex-1.5-x86_64-1.txz
+| | |-- openobex-1.5-x86_64-1.txz.asc
+| | |-- openssh-5.5p1-x86_64-1.txt
+| | |-- openssh-5.5p1-x86_64-1.txz
+| | |-- openssh-5.5p1-x86_64-1.txz.asc
+| | |-- openssl-0.9.8n-x86_64-1.txt
+| | |-- openssl-0.9.8n-x86_64-1.txz
+| | |-- openssl-0.9.8n-x86_64-1.txz.asc
+| | |-- openvpn-2.1.1-x86_64-1.txt
+| | |-- openvpn-2.1.1-x86_64-1.txz
+| | |-- openvpn-2.1.1-x86_64-1.txz.asc
+| | |-- php-5.2.13-x86_64-2.txt
+| | |-- php-5.2.13-x86_64-2.txz
+| | |-- php-5.2.13-x86_64-2.txz.asc
| | |-- pidentd-3.0.19-x86_64-1.txt
| | |-- pidentd-3.0.19-x86_64-1.txz
| | |-- pidentd-3.0.19-x86_64-1.txz.asc
-| | |-- pinentry-0.7.6-x86_64-1.txt
-| | |-- pinentry-0.7.6-x86_64-1.txz
-| | |-- pinentry-0.7.6-x86_64-1.txz.asc
+| | |-- pinentry-0.8.0-x86_64-1.txt
+| | |-- pinentry-0.8.0-x86_64-1.txz
+| | |-- pinentry-0.8.0-x86_64-1.txz.asc
| | |-- popa3d-1.0.2-x86_64-2.txt
| | |-- popa3d-1.0.2-x86_64-2.txz
| | |-- popa3d-1.0.2-x86_64-2.txz.asc
| | |-- portmap-6.0-x86_64-1.txt
| | |-- portmap-6.0-x86_64-1.txz
| | |-- portmap-6.0-x86_64-1.txz.asc
-| | |-- ppp-2.4.4-x86_64-1.txt
-| | |-- ppp-2.4.4-x86_64-1.txz
-| | |-- ppp-2.4.4-x86_64-1.txz.asc
+| | |-- ppp-2.4.5-x86_64-1.txt
+| | |-- ppp-2.4.5-x86_64-1.txz
+| | |-- ppp-2.4.5-x86_64-1.txz.asc
| | |-- procmail-3.22-x86_64-2.txt
| | |-- procmail-3.22-x86_64-2.txz
| | |-- procmail-3.22-x86_64-2.txz.asc
-| | |-- proftpd-1.3.2-x86_64-2.txt
-| | |-- proftpd-1.3.2-x86_64-2.txz
-| | |-- proftpd-1.3.2-x86_64-2.txz.asc
-| | |-- pssh-1.3.1-noarch-1.txt
-| | |-- pssh-1.3.1-noarch-1.txz
-| | |-- pssh-1.3.1-noarch-1.txz.asc
+| | |-- proftpd-1.3.3-x86_64-2.txt
+| | |-- proftpd-1.3.3-x86_64-2.txz
+| | |-- proftpd-1.3.3-x86_64-2.txz.asc
+| | |-- pssh-2.1.1-noarch-1.txt
+| | |-- pssh-2.1.1-noarch-1.txz
+| | |-- pssh-2.1.1-noarch-1.txz.asc
| | |-- pth-2.0.7-x86_64-1.txt
| | |-- pth-2.0.7-x86_64-1.txz
| | |-- pth-2.0.7-x86_64-1.txz.asc
-| | |-- rdist-6.1.5-x86_64-1.txt
-| | |-- rdist-6.1.5-x86_64-1.txz
-| | |-- rdist-6.1.5-x86_64-1.txz.asc
+| | |-- rdist-6.1.5-x86_64-2.txt
+| | |-- rdist-6.1.5-x86_64-2.txz
+| | |-- rdist-6.1.5-x86_64-2.txz.asc
| | |-- rp-pppoe-3.10-x86_64-1.txt
| | |-- rp-pppoe-3.10-x86_64-1.txz
| | |-- rp-pppoe-3.10-x86_64-1.txz.asc
-| | |-- rsync-3.0.6-x86_64-1.txt
-| | |-- rsync-3.0.6-x86_64-1.txz
-| | |-- rsync-3.0.6-x86_64-1.txz.asc
+| | |-- rsync-3.0.7-x86_64-1.txt
+| | |-- rsync-3.0.7-x86_64-1.txz
+| | |-- rsync-3.0.7-x86_64-1.txz.asc
+| | |-- rt2860-firmware-26-fw-1.txt
+| | |-- rt2860-firmware-26-fw-1.txz
+| | |-- rt2860-firmware-26-fw-1.txz.asc
+| | |-- rt2870-firmware-22-fw-1.txt
+| | |-- rt2870-firmware-22-fw-1.txz
+| | |-- rt2870-firmware-22-fw-1.txz.asc
| | |-- rt61-firmware-1.2-fw-1.txt
| | |-- rt61-firmware-1.2-fw-1.txz
| | |-- rt61-firmware-1.2-fw-1.txz.asc
| | |-- rt71w-firmware-1.8-fw-1.txt
| | |-- rt71w-firmware-1.8-fw-1.txz
| | |-- rt71w-firmware-1.8-fw-1.txz.asc
-| | |-- samba-3.2.13-x86_64-1.txt
-| | |-- samba-3.2.13-x86_64-1.txz
-| | |-- samba-3.2.13-x86_64-1.txz.asc
-| | |-- sendmail-8.14.3-x86_64-2.txt
-| | |-- sendmail-8.14.3-x86_64-2.txz
-| | |-- sendmail-8.14.3-x86_64-2.txz.asc
-| | |-- sendmail-cf-8.14.3-noarch-2.txt
-| | |-- sendmail-cf-8.14.3-noarch-2.txz
-| | |-- sendmail-cf-8.14.3-noarch-2.txz.asc
-| | |-- slrn-0.9.9p1-x86_64-2.txt
-| | |-- slrn-0.9.9p1-x86_64-2.txz
-| | |-- slrn-0.9.9p1-x86_64-2.txz.asc
-| | |-- snownews-1.5.11-x86_64-2.txt
-| | |-- snownews-1.5.11-x86_64-2.txz
-| | |-- snownews-1.5.11-x86_64-2.txz.asc
-| | |-- stunnel-4.17-x86_64-1.txt
-| | |-- stunnel-4.17-x86_64-1.txz
-| | |-- stunnel-4.17-x86_64-1.txz.asc
+| | |-- samba-3.5.2-x86_64-1.txt
+| | |-- samba-3.5.2-x86_64-1.txz
+| | |-- samba-3.5.2-x86_64-1.txz.asc
+| | |-- sendmail-8.14.4-x86_64-1.txt
+| | |-- sendmail-8.14.4-x86_64-1.txz
+| | |-- sendmail-8.14.4-x86_64-1.txz.asc
+| | |-- sendmail-cf-8.14.4-noarch-1.txt
+| | |-- sendmail-cf-8.14.4-noarch-1.txz
+| | |-- sendmail-cf-8.14.4-noarch-1.txz.asc
+| | |-- slrn-0.9.9p1-x86_64-3.txt
+| | |-- slrn-0.9.9p1-x86_64-3.txz
+| | |-- slrn-0.9.9p1-x86_64-3.txz.asc
+| | |-- snownews-1.5.12-x86_64-1.txt
+| | |-- snownews-1.5.12-x86_64-1.txz
+| | |-- snownews-1.5.12-x86_64-1.txz.asc
+| | |-- stunnel-4.33-x86_64-1.txt
+| | |-- stunnel-4.33-x86_64-1.txz
+| | |-- stunnel-4.33-x86_64-1.txz.asc
| | |-- tagfile
| | |-- tcp_wrappers-7.6-x86_64-1.txt
| | |-- tcp_wrappers-7.6-x86_64-1.txz
| | |-- tcp_wrappers-7.6-x86_64-1.txz.asc
-| | |-- tcpdump-4.0.0-x86_64-1.txt
-| | |-- tcpdump-4.0.0-x86_64-1.txz
-| | |-- tcpdump-4.0.0-x86_64-1.txz.asc
+| | |-- tcpdump-4.0.0-x86_64-2.txt
+| | |-- tcpdump-4.0.0-x86_64-2.txz
+| | |-- tcpdump-4.0.0-x86_64-2.txz.asc
| | |-- telnet-0.17-x86_64-2.txt
| | |-- telnet-0.17-x86_64-2.txz
| | |-- telnet-0.17-x86_64-2.txz.asc
-| | |-- tftp-hpa-0.48-x86_64-1.txt
-| | |-- tftp-hpa-0.48-x86_64-1.txz
-| | |-- tftp-hpa-0.48-x86_64-1.txz.asc
+| | |-- tftp-hpa-0.49-x86_64-1.txt
+| | |-- tftp-hpa-0.49-x86_64-1.txz
+| | |-- tftp-hpa-0.49-x86_64-1.txz.asc
| | |-- tin-1.8.2-x86_64-2.txt
| | |-- tin-1.8.2-x86_64-2.txz
| | |-- tin-1.8.2-x86_64-2.txz.asc
-| | |-- traceroute-1.4a12-x86_64-2.txt
-| | |-- traceroute-1.4a12-x86_64-2.txz
-| | |-- traceroute-1.4a12-x86_64-2.txz.asc
+| | |-- traceroute-2.0.14-x86_64-1.txt
+| | |-- traceroute-2.0.14-x86_64-1.txz
+| | |-- traceroute-2.0.14-x86_64-1.txz.asc
| | |-- trn-3.6-x86_64-2.txt
| | |-- trn-3.6-x86_64-2.txz
| | |-- trn-3.6-x86_64-2.txz.asc
@@ -2545,24 +2645,24 @@ see additional documentation files. | | |-- vlan-1.9-x86_64-2.txt
| | |-- vlan-1.9-x86_64-2.txz
| | |-- vlan-1.9-x86_64-2.txz.asc
-| | |-- vsftpd-2.1.2-x86_64-1.txt
-| | |-- vsftpd-2.1.2-x86_64-1.txz
-| | |-- vsftpd-2.1.2-x86_64-1.txz.asc
-| | |-- wget-1.11.4-x86_64-1.txt
-| | |-- wget-1.11.4-x86_64-1.txz
-| | |-- wget-1.11.4-x86_64-1.txz.asc
-| | |-- whois-4.7.26-x86_64-1.txt
-| | |-- whois-4.7.26-x86_64-1.txz
-| | |-- whois-4.7.26-x86_64-1.txz.asc
-| | |-- wireless-tools-29-x86_64-5.txt
-| | |-- wireless-tools-29-x86_64-5.txz
-| | |-- wireless-tools-29-x86_64-5.txz.asc
-| | |-- wpa_supplicant-0.6.9-x86_64-2.txt
-| | |-- wpa_supplicant-0.6.9-x86_64-2.txz
-| | |-- wpa_supplicant-0.6.9-x86_64-2.txz.asc
-| | |-- yptools-2.9-x86_64-1.txt
-| | |-- yptools-2.9-x86_64-1.txz
-| | |-- yptools-2.9-x86_64-1.txz.asc
+| | |-- vsftpd-2.2.2-x86_64-1.txt
+| | |-- vsftpd-2.2.2-x86_64-1.txz
+| | |-- vsftpd-2.2.2-x86_64-1.txz.asc
+| | |-- wget-1.12-x86_64-1.txt
+| | |-- wget-1.12-x86_64-1.txz
+| | |-- wget-1.12-x86_64-1.txz.asc
+| | |-- whois-5.0.2-x86_64-1.txt
+| | |-- whois-5.0.2-x86_64-1.txz
+| | |-- whois-5.0.2-x86_64-1.txz.asc
+| | |-- wireless-tools-29-x86_64-6.txt
+| | |-- wireless-tools-29-x86_64-6.txz
+| | |-- wireless-tools-29-x86_64-6.txz.asc
+| | |-- wpa_supplicant-0.6.10-x86_64-1.txt
+| | |-- wpa_supplicant-0.6.10-x86_64-1.txz
+| | |-- wpa_supplicant-0.6.10-x86_64-1.txz.asc
+| | |-- yptools-2.12-x86_64-1.txt
+| | |-- yptools-2.12-x86_64-1.txz
+| | |-- yptools-2.12-x86_64-1.txz.asc
| | |-- ytalk-3.3.0-x86_64-2.txt
| | |-- ytalk-3.3.0-x86_64-2.txz
| | |-- ytalk-3.3.0-x86_64-2.txz.asc
@@ -2575,18 +2675,18 @@ see additional documentation files. | | |-- maketag
| | |-- maketag.ez
| | |-- tagfile
-| | |-- tetex-3.0-x86_64-6.txt
-| | |-- tetex-3.0-x86_64-6.txz
-| | |-- tetex-3.0-x86_64-6.txz.asc
-| | |-- tetex-doc-3.0-x86_64-6.txt
-| | |-- tetex-doc-3.0-x86_64-6.txz
-| | |-- tetex-doc-3.0-x86_64-6.txz.asc
-| | |-- transfig-3.2.4-x86_64-2.txt
-| | |-- transfig-3.2.4-x86_64-2.txz
-| | |-- transfig-3.2.4-x86_64-2.txz.asc
-| | |-- xfig-3.2.4-x86_64-3.txt
-| | |-- xfig-3.2.4-x86_64-3.txz
-| | `-- xfig-3.2.4-x86_64-3.txz.asc
+| | |-- tetex-3.0-x86_64-8.txt
+| | |-- tetex-3.0-x86_64-8.txz
+| | |-- tetex-3.0-x86_64-8.txz.asc
+| | |-- tetex-doc-3.0-x86_64-8.txt
+| | |-- tetex-doc-3.0-x86_64-8.txz
+| | |-- tetex-doc-3.0-x86_64-8.txz.asc
+| | |-- transfig-3.2.4-x86_64-3.txt
+| | |-- transfig-3.2.4-x86_64-3.txz
+| | |-- transfig-3.2.4-x86_64-3.txz.asc
+| | |-- xfig-3.2.4-x86_64-5.txt
+| | |-- xfig-3.2.4-x86_64-5.txz
+| | `-- xfig-3.2.4-x86_64-5.txz.asc
| |-- tcl
| | |-- expect-5.44.1.11-x86_64-3.txt
| | |-- expect-5.44.1.11-x86_64-3.txz
@@ -2599,187 +2699,187 @@ see additional documentation files. | | |-- maketag
| | |-- maketag.ez
| | |-- tagfile
-| | |-- tcl-8.5.7-x86_64-1.txt
-| | |-- tcl-8.5.7-x86_64-1.txz
-| | |-- tcl-8.5.7-x86_64-1.txz.asc
-| | |-- tclx-8.4-x86_64-2.txt
-| | |-- tclx-8.4-x86_64-2.txz
-| | |-- tclx-8.4-x86_64-2.txz.asc
-| | |-- tix-8.4.3-x86_64-1.txt
-| | |-- tix-8.4.3-x86_64-1.txz
-| | |-- tix-8.4.3-x86_64-1.txz.asc
-| | |-- tk-8.5.7-x86_64-1.txt
-| | |-- tk-8.5.7-x86_64-1.txz
-| | `-- tk-8.5.7-x86_64-1.txz.asc
+| | |-- tcl-8.5.8-x86_64-1.txt
+| | |-- tcl-8.5.8-x86_64-1.txz
+| | |-- tcl-8.5.8-x86_64-1.txz.asc
+| | |-- tclx-8.4-x86_64-3.txt
+| | |-- tclx-8.4-x86_64-3.txz
+| | |-- tclx-8.4-x86_64-3.txz.asc
+| | |-- tix-8.4.3-x86_64-2.txt
+| | |-- tix-8.4.3-x86_64-2.txz
+| | |-- tix-8.4.3-x86_64-2.txz.asc
+| | |-- tk-8.5.8-x86_64-1.txt
+| | |-- tk-8.5.8-x86_64-1.txz
+| | `-- tk-8.5.8-x86_64-1.txz.asc
| |-- x
| | |-- anthy-9100e-x86_64-1.txt
| | |-- anthy-9100e-x86_64-1.txz
| | |-- anthy-9100e-x86_64-1.txz.asc
-| | |-- appres-1.0.1-x86_64-2.txt
-| | |-- appres-1.0.1-x86_64-2.txz
-| | |-- appres-1.0.1-x86_64-2.txz.asc
-| | |-- bdftopcf-1.0.1-x86_64-2.txt
-| | |-- bdftopcf-1.0.1-x86_64-2.txz
-| | |-- bdftopcf-1.0.1-x86_64-2.txz.asc
+| | |-- appres-1.0.2-x86_64-1.txt
+| | |-- appres-1.0.2-x86_64-1.txz
+| | |-- appres-1.0.2-x86_64-1.txz.asc
+| | |-- bdftopcf-1.0.2-x86_64-1.txt
+| | |-- bdftopcf-1.0.2-x86_64-1.txz
+| | |-- bdftopcf-1.0.2-x86_64-1.txz.asc
| | |-- beforelight-1.0.3-x86_64-1.txt
| | |-- beforelight-1.0.3-x86_64-1.txz
| | |-- beforelight-1.0.3-x86_64-1.txz.asc
-| | |-- bigreqsproto-1.0.2-noarch-2.txt
-| | |-- bigreqsproto-1.0.2-noarch-2.txz
-| | |-- bigreqsproto-1.0.2-noarch-2.txz.asc
-| | |-- bitmap-1.0.3-x86_64-2.txt
-| | |-- bitmap-1.0.3-x86_64-2.txz
-| | |-- bitmap-1.0.3-x86_64-2.txz.asc
-| | |-- compiz-0.7.8-x86_64-4.txt
-| | |-- compiz-0.7.8-x86_64-4.txz
-| | |-- compiz-0.7.8-x86_64-4.txz.asc
-| | |-- compositeproto-0.4-noarch-2.txt
-| | |-- compositeproto-0.4-noarch-2.txz
-| | |-- compositeproto-0.4-noarch-2.txz.asc
-| | |-- damageproto-1.1.0-noarch-2.txt
-| | |-- damageproto-1.1.0-noarch-2.txz
-| | |-- damageproto-1.1.0-noarch-2.txz.asc
-| | |-- dejavu-fonts-ttf-2.29-noarch-1.txt
-| | |-- dejavu-fonts-ttf-2.29-noarch-1.txz
-| | |-- dejavu-fonts-ttf-2.29-noarch-1.txz.asc
-| | |-- dmxproto-2.2.2-noarch-2.txt
-| | |-- dmxproto-2.2.2-noarch-2.txz
-| | |-- dmxproto-2.2.2-noarch-2.txz.asc
-| | |-- dri2proto-2.1-x86_64-1.txt
-| | |-- dri2proto-2.1-x86_64-1.txz
-| | |-- dri2proto-2.1-x86_64-1.txz.asc
-| | |-- editres-1.0.3-x86_64-2.txt
-| | |-- editres-1.0.3-x86_64-2.txz
-| | |-- editres-1.0.3-x86_64-2.txz.asc
-| | |-- encodings-1.0.2-noarch-2.txt
-| | |-- encodings-1.0.2-noarch-2.txz
-| | |-- encodings-1.0.2-noarch-2.txz.asc
-| | |-- evieext-1.0.2-noarch-2.txt
-| | |-- evieext-1.0.2-noarch-2.txz
-| | |-- evieext-1.0.2-noarch-2.txz.asc
-| | |-- fixesproto-4.0-noarch-2.txt
-| | |-- fixesproto-4.0-noarch-2.txz
-| | |-- fixesproto-4.0-noarch-2.txz.asc
-| | |-- font-adobe-100dpi-1.0.0-noarch-3.txt
-| | |-- font-adobe-100dpi-1.0.0-noarch-3.txz
-| | |-- font-adobe-100dpi-1.0.0-noarch-3.txz.asc
-| | |-- font-adobe-75dpi-1.0.0-noarch-3.txt
-| | |-- font-adobe-75dpi-1.0.0-noarch-3.txz
-| | |-- font-adobe-75dpi-1.0.0-noarch-3.txz.asc
-| | |-- font-adobe-utopia-100dpi-1.0.1-noarch-3.txt
-| | |-- font-adobe-utopia-100dpi-1.0.1-noarch-3.txz
-| | |-- font-adobe-utopia-100dpi-1.0.1-noarch-3.txz.asc
-| | |-- font-adobe-utopia-75dpi-1.0.1-noarch-3.txt
-| | |-- font-adobe-utopia-75dpi-1.0.1-noarch-3.txz
-| | |-- font-adobe-utopia-75dpi-1.0.1-noarch-3.txz.asc
-| | |-- font-adobe-utopia-type1-1.0.1-noarch-3.txt
-| | |-- font-adobe-utopia-type1-1.0.1-noarch-3.txz
-| | |-- font-adobe-utopia-type1-1.0.1-noarch-3.txz.asc
-| | |-- font-alias-1.0.1-noarch-2.txt
-| | |-- font-alias-1.0.1-noarch-2.txz
-| | |-- font-alias-1.0.1-noarch-2.txz.asc
-| | |-- font-arabic-misc-1.0.0-noarch-3.txt
-| | |-- font-arabic-misc-1.0.0-noarch-3.txz
-| | |-- font-arabic-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-bh-100dpi-1.0.0-noarch-3.txt
-| | |-- font-bh-100dpi-1.0.0-noarch-3.txz
-| | |-- font-bh-100dpi-1.0.0-noarch-3.txz.asc
-| | |-- font-bh-75dpi-1.0.0-noarch-3.txt
-| | |-- font-bh-75dpi-1.0.0-noarch-3.txz
-| | |-- font-bh-75dpi-1.0.0-noarch-3.txz.asc
-| | |-- font-bh-lucidatypewriter-100dpi-1.0.0-noarch-3.txt
-| | |-- font-bh-lucidatypewriter-100dpi-1.0.0-noarch-3.txz
-| | |-- font-bh-lucidatypewriter-100dpi-1.0.0-noarch-3.txz.asc
-| | |-- font-bh-lucidatypewriter-75dpi-1.0.0-noarch-3.txt
-| | |-- font-bh-lucidatypewriter-75dpi-1.0.0-noarch-3.txz
-| | |-- font-bh-lucidatypewriter-75dpi-1.0.0-noarch-3.txz.asc
-| | |-- font-bh-ttf-1.0.0-noarch-3.txt
-| | |-- font-bh-ttf-1.0.0-noarch-3.txz
-| | |-- font-bh-ttf-1.0.0-noarch-3.txz.asc
-| | |-- font-bh-type1-1.0.0-noarch-3.txt
-| | |-- font-bh-type1-1.0.0-noarch-3.txz
-| | |-- font-bh-type1-1.0.0-noarch-3.txz.asc
-| | |-- font-bitstream-100dpi-1.0.0-noarch-3.txt
-| | |-- font-bitstream-100dpi-1.0.0-noarch-3.txz
-| | |-- font-bitstream-100dpi-1.0.0-noarch-3.txz.asc
-| | |-- font-bitstream-75dpi-1.0.0-noarch-3.txt
-| | |-- font-bitstream-75dpi-1.0.0-noarch-3.txz
-| | |-- font-bitstream-75dpi-1.0.0-noarch-3.txz.asc
-| | |-- font-bitstream-speedo-1.0.0-noarch-3.txt
-| | |-- font-bitstream-speedo-1.0.0-noarch-3.txz
-| | |-- font-bitstream-speedo-1.0.0-noarch-3.txz.asc
-| | |-- font-bitstream-type1-1.0.0-noarch-3.txt
-| | |-- font-bitstream-type1-1.0.0-noarch-3.txz
-| | |-- font-bitstream-type1-1.0.0-noarch-3.txz.asc
-| | |-- font-cronyx-cyrillic-1.0.0-noarch-3.txt
-| | |-- font-cronyx-cyrillic-1.0.0-noarch-3.txz
-| | |-- font-cronyx-cyrillic-1.0.0-noarch-3.txz.asc
-| | |-- font-cursor-misc-1.0.0-noarch-3.txt
-| | |-- font-cursor-misc-1.0.0-noarch-3.txz
-| | |-- font-cursor-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-daewoo-misc-1.0.0-noarch-3.txt
-| | |-- font-daewoo-misc-1.0.0-noarch-3.txz
-| | |-- font-daewoo-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-dec-misc-1.0.0-noarch-3.txt
-| | |-- font-dec-misc-1.0.0-noarch-3.txz
-| | |-- font-dec-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-ibm-type1-1.0.0-noarch-3.txt
-| | |-- font-ibm-type1-1.0.0-noarch-3.txz
-| | |-- font-ibm-type1-1.0.0-noarch-3.txz.asc
-| | |-- font-isas-misc-1.0.0-noarch-3.txt
-| | |-- font-isas-misc-1.0.0-noarch-3.txz
-| | |-- font-isas-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-jis-misc-1.0.0-noarch-3.txt
-| | |-- font-jis-misc-1.0.0-noarch-3.txz
-| | |-- font-jis-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-micro-misc-1.0.0-noarch-3.txt
-| | |-- font-micro-misc-1.0.0-noarch-3.txz
-| | |-- font-micro-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-misc-cyrillic-1.0.0-noarch-3.txt
-| | |-- font-misc-cyrillic-1.0.0-noarch-3.txz
-| | |-- font-misc-cyrillic-1.0.0-noarch-3.txz.asc
-| | |-- font-misc-ethiopic-1.0.0-noarch-3.txt
-| | |-- font-misc-ethiopic-1.0.0-noarch-3.txz
-| | |-- font-misc-ethiopic-1.0.0-noarch-3.txz.asc
-| | |-- font-misc-meltho-1.0.0-noarch-3.txt
-| | |-- font-misc-meltho-1.0.0-noarch-3.txz
-| | |-- font-misc-meltho-1.0.0-noarch-3.txz.asc
-| | |-- font-misc-misc-1.0.0-noarch-4.txt
-| | |-- font-misc-misc-1.0.0-noarch-4.txz
-| | |-- font-misc-misc-1.0.0-noarch-4.txz.asc
-| | |-- font-mutt-misc-1.0.0-noarch-3.txt
-| | |-- font-mutt-misc-1.0.0-noarch-3.txz
-| | |-- font-mutt-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-schumacher-misc-1.0.0-noarch-3.txt
-| | |-- font-schumacher-misc-1.0.0-noarch-3.txz
-| | |-- font-schumacher-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-screen-cyrillic-1.0.1-noarch-3.txt
-| | |-- font-screen-cyrillic-1.0.1-noarch-3.txz
-| | |-- font-screen-cyrillic-1.0.1-noarch-3.txz.asc
-| | |-- font-sony-misc-1.0.0-noarch-3.txt
-| | |-- font-sony-misc-1.0.0-noarch-3.txz
-| | |-- font-sony-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-sun-misc-1.0.0-noarch-3.txt
-| | |-- font-sun-misc-1.0.0-noarch-3.txz
-| | |-- font-sun-misc-1.0.0-noarch-3.txz.asc
-| | |-- font-util-1.0.1-x86_64-2.txt
-| | |-- font-util-1.0.1-x86_64-2.txz
-| | |-- font-util-1.0.1-x86_64-2.txz.asc
-| | |-- font-winitzki-cyrillic-1.0.0-noarch-3.txt
-| | |-- font-winitzki-cyrillic-1.0.0-noarch-3.txz
-| | |-- font-winitzki-cyrillic-1.0.0-noarch-3.txz.asc
-| | |-- font-xfree86-type1-1.0.1-noarch-2.txt
-| | |-- font-xfree86-type1-1.0.1-noarch-2.txz
-| | |-- font-xfree86-type1-1.0.1-noarch-2.txz.asc
-| | |-- fontcacheproto-0.1.2-noarch-2.txt
-| | |-- fontcacheproto-0.1.2-noarch-2.txz
-| | |-- fontcacheproto-0.1.2-noarch-2.txz.asc
-| | |-- fontconfig-2.6.0-x86_64-2.txt
-| | |-- fontconfig-2.6.0-x86_64-2.txz
-| | |-- fontconfig-2.6.0-x86_64-2.txz.asc
-| | |-- fontsproto-2.0.2-noarch-2.txt
-| | |-- fontsproto-2.0.2-noarch-2.txz
-| | |-- fontsproto-2.0.2-noarch-2.txz.asc
+| | |-- bigreqsproto-1.1.0-noarch-1.txt
+| | |-- bigreqsproto-1.1.0-noarch-1.txz
+| | |-- bigreqsproto-1.1.0-noarch-1.txz.asc
+| | |-- bitmap-1.0.4-x86_64-1.txt
+| | |-- bitmap-1.0.4-x86_64-1.txz
+| | |-- bitmap-1.0.4-x86_64-1.txz.asc
+| | |-- compiz-0.8.6-x86_64-1.txt
+| | |-- compiz-0.8.6-x86_64-1.txz
+| | |-- compiz-0.8.6-x86_64-1.txz.asc
+| | |-- compositeproto-0.4.1-noarch-1.txt
+| | |-- compositeproto-0.4.1-noarch-1.txz
+| | |-- compositeproto-0.4.1-noarch-1.txz.asc
+| | |-- damageproto-1.2.0-noarch-1.txt
+| | |-- damageproto-1.2.0-noarch-1.txz
+| | |-- damageproto-1.2.0-noarch-1.txz.asc
+| | |-- dejavu-fonts-ttf-2.30-noarch-1.txt
+| | |-- dejavu-fonts-ttf-2.30-noarch-1.txz
+| | |-- dejavu-fonts-ttf-2.30-noarch-1.txz.asc
+| | |-- dmxproto-2.3-noarch-1.txt
+| | |-- dmxproto-2.3-noarch-1.txz
+| | |-- dmxproto-2.3-noarch-1.txz.asc
+| | |-- dri2proto-2.3-x86_64-1.txt
+| | |-- dri2proto-2.3-x86_64-1.txz
+| | |-- dri2proto-2.3-x86_64-1.txz.asc
+| | |-- editres-1.0.4-x86_64-1.txt
+| | |-- editres-1.0.4-x86_64-1.txz
+| | |-- editres-1.0.4-x86_64-1.txz.asc
+| | |-- encodings-1.0.3-noarch-1.txt
+| | |-- encodings-1.0.3-noarch-1.txz
+| | |-- encodings-1.0.3-noarch-1.txz.asc
+| | |-- evieext-1.1.0-noarch-1.txt
+| | |-- evieext-1.1.0-noarch-1.txz
+| | |-- evieext-1.1.0-noarch-1.txz.asc
+| | |-- fixesproto-4.1.1-noarch-1.txt
+| | |-- fixesproto-4.1.1-noarch-1.txz
+| | |-- fixesproto-4.1.1-noarch-1.txz.asc
+| | |-- font-adobe-100dpi-1.0.1-noarch-1.txt
+| | |-- font-adobe-100dpi-1.0.1-noarch-1.txz
+| | |-- font-adobe-100dpi-1.0.1-noarch-1.txz.asc
+| | |-- font-adobe-75dpi-1.0.1-noarch-1.txt
+| | |-- font-adobe-75dpi-1.0.1-noarch-1.txz
+| | |-- font-adobe-75dpi-1.0.1-noarch-1.txz.asc
+| | |-- font-adobe-utopia-100dpi-1.0.2-noarch-1.txt
+| | |-- font-adobe-utopia-100dpi-1.0.2-noarch-1.txz
+| | |-- font-adobe-utopia-100dpi-1.0.2-noarch-1.txz.asc
+| | |-- font-adobe-utopia-75dpi-1.0.2-noarch-1.txt
+| | |-- font-adobe-utopia-75dpi-1.0.2-noarch-1.txz
+| | |-- font-adobe-utopia-75dpi-1.0.2-noarch-1.txz.asc
+| | |-- font-adobe-utopia-type1-1.0.2-noarch-1.txt
+| | |-- font-adobe-utopia-type1-1.0.2-noarch-1.txz
+| | |-- font-adobe-utopia-type1-1.0.2-noarch-1.txz.asc
+| | |-- font-alias-1.0.2-noarch-1.txt
+| | |-- font-alias-1.0.2-noarch-1.txz
+| | |-- font-alias-1.0.2-noarch-1.txz.asc
+| | |-- font-arabic-misc-1.0.1-noarch-1.txt
+| | |-- font-arabic-misc-1.0.1-noarch-1.txz
+| | |-- font-arabic-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-bh-100dpi-1.0.1-noarch-1.txt
+| | |-- font-bh-100dpi-1.0.1-noarch-1.txz
+| | |-- font-bh-100dpi-1.0.1-noarch-1.txz.asc
+| | |-- font-bh-75dpi-1.0.1-noarch-1.txt
+| | |-- font-bh-75dpi-1.0.1-noarch-1.txz
+| | |-- font-bh-75dpi-1.0.1-noarch-1.txz.asc
+| | |-- font-bh-lucidatypewriter-100dpi-1.0.1-noarch-1.txt
+| | |-- font-bh-lucidatypewriter-100dpi-1.0.1-noarch-1.txz
+| | |-- font-bh-lucidatypewriter-100dpi-1.0.1-noarch-1.txz.asc
+| | |-- font-bh-lucidatypewriter-75dpi-1.0.1-noarch-1.txt
+| | |-- font-bh-lucidatypewriter-75dpi-1.0.1-noarch-1.txz
+| | |-- font-bh-lucidatypewriter-75dpi-1.0.1-noarch-1.txz.asc
+| | |-- font-bh-ttf-1.0.1-noarch-1.txt
+| | |-- font-bh-ttf-1.0.1-noarch-1.txz
+| | |-- font-bh-ttf-1.0.1-noarch-1.txz.asc
+| | |-- font-bh-type1-1.0.1-noarch-1.txt
+| | |-- font-bh-type1-1.0.1-noarch-1.txz
+| | |-- font-bh-type1-1.0.1-noarch-1.txz.asc
+| | |-- font-bitstream-100dpi-1.0.1-noarch-1.txt
+| | |-- font-bitstream-100dpi-1.0.1-noarch-1.txz
+| | |-- font-bitstream-100dpi-1.0.1-noarch-1.txz.asc
+| | |-- font-bitstream-75dpi-1.0.1-noarch-1.txt
+| | |-- font-bitstream-75dpi-1.0.1-noarch-1.txz
+| | |-- font-bitstream-75dpi-1.0.1-noarch-1.txz.asc
+| | |-- font-bitstream-speedo-1.0.1-noarch-1.txt
+| | |-- font-bitstream-speedo-1.0.1-noarch-1.txz
+| | |-- font-bitstream-speedo-1.0.1-noarch-1.txz.asc
+| | |-- font-bitstream-type1-1.0.1-noarch-1.txt
+| | |-- font-bitstream-type1-1.0.1-noarch-1.txz
+| | |-- font-bitstream-type1-1.0.1-noarch-1.txz.asc
+| | |-- font-cronyx-cyrillic-1.0.1-noarch-1.txt
+| | |-- font-cronyx-cyrillic-1.0.1-noarch-1.txz
+| | |-- font-cronyx-cyrillic-1.0.1-noarch-1.txz.asc
+| | |-- font-cursor-misc-1.0.1-noarch-1.txt
+| | |-- font-cursor-misc-1.0.1-noarch-1.txz
+| | |-- font-cursor-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-daewoo-misc-1.0.1-noarch-1.txt
+| | |-- font-daewoo-misc-1.0.1-noarch-1.txz
+| | |-- font-daewoo-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-dec-misc-1.0.1-noarch-1.txt
+| | |-- font-dec-misc-1.0.1-noarch-1.txz
+| | |-- font-dec-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-ibm-type1-1.0.1-noarch-1.txt
+| | |-- font-ibm-type1-1.0.1-noarch-1.txz
+| | |-- font-ibm-type1-1.0.1-noarch-1.txz.asc
+| | |-- font-isas-misc-1.0.1-noarch-1.txt
+| | |-- font-isas-misc-1.0.1-noarch-1.txz
+| | |-- font-isas-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-jis-misc-1.0.1-noarch-1.txt
+| | |-- font-jis-misc-1.0.1-noarch-1.txz
+| | |-- font-jis-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-micro-misc-1.0.1-noarch-1.txt
+| | |-- font-micro-misc-1.0.1-noarch-1.txz
+| | |-- font-micro-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-misc-cyrillic-1.0.1-noarch-1.txt
+| | |-- font-misc-cyrillic-1.0.1-noarch-1.txz
+| | |-- font-misc-cyrillic-1.0.1-noarch-1.txz.asc
+| | |-- font-misc-ethiopic-1.0.1-noarch-1.txt
+| | |-- font-misc-ethiopic-1.0.1-noarch-1.txz
+| | |-- font-misc-ethiopic-1.0.1-noarch-1.txz.asc
+| | |-- font-misc-meltho-1.0.1-noarch-1.txt
+| | |-- font-misc-meltho-1.0.1-noarch-1.txz
+| | |-- font-misc-meltho-1.0.1-noarch-1.txz.asc
+| | |-- font-misc-misc-1.1.0-noarch-1.txt
+| | |-- font-misc-misc-1.1.0-noarch-1.txz
+| | |-- font-misc-misc-1.1.0-noarch-1.txz.asc
+| | |-- font-mutt-misc-1.0.1-noarch-1.txt
+| | |-- font-mutt-misc-1.0.1-noarch-1.txz
+| | |-- font-mutt-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-schumacher-misc-1.1.0-noarch-1.txt
+| | |-- font-schumacher-misc-1.1.0-noarch-1.txz
+| | |-- font-schumacher-misc-1.1.0-noarch-1.txz.asc
+| | |-- font-screen-cyrillic-1.0.2-noarch-1.txt
+| | |-- font-screen-cyrillic-1.0.2-noarch-1.txz
+| | |-- font-screen-cyrillic-1.0.2-noarch-1.txz.asc
+| | |-- font-sony-misc-1.0.1-noarch-1.txt
+| | |-- font-sony-misc-1.0.1-noarch-1.txz
+| | |-- font-sony-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-sun-misc-1.0.1-noarch-1.txt
+| | |-- font-sun-misc-1.0.1-noarch-1.txz
+| | |-- font-sun-misc-1.0.1-noarch-1.txz.asc
+| | |-- font-util-1.1.1-x86_64-1.txt
+| | |-- font-util-1.1.1-x86_64-1.txz
+| | |-- font-util-1.1.1-x86_64-1.txz.asc
+| | |-- font-winitzki-cyrillic-1.0.1-noarch-1.txt
+| | |-- font-winitzki-cyrillic-1.0.1-noarch-1.txz
+| | |-- font-winitzki-cyrillic-1.0.1-noarch-1.txz.asc
+| | |-- font-xfree86-type1-1.0.2-noarch-1.txt
+| | |-- font-xfree86-type1-1.0.2-noarch-1.txz
+| | |-- font-xfree86-type1-1.0.2-noarch-1.txz.asc
+| | |-- fontcacheproto-0.1.3-noarch-1.txt
+| | |-- fontcacheproto-0.1.3-noarch-1.txz
+| | |-- fontcacheproto-0.1.3-noarch-1.txz.asc
+| | |-- fontconfig-2.8.0-x86_64-1.txt
+| | |-- fontconfig-2.8.0-x86_64-1.txz
+| | |-- fontconfig-2.8.0-x86_64-1.txz.asc
+| | |-- fontsproto-2.1.0-noarch-1.txt
+| | |-- fontsproto-2.1.0-noarch-1.txz
+| | |-- fontsproto-2.1.0-noarch-1.txz.asc
| | |-- fonttosfnt-1.0.4-x86_64-1.txt
| | |-- fonttosfnt-1.0.4-x86_64-1.txz
| | |-- fonttosfnt-1.0.4-x86_64-1.txz.asc
@@ -2795,101 +2895,98 @@ see additional documentation files. | | |-- glew-1.5.1-x86_64-1.txt
| | |-- glew-1.5.1-x86_64-1.txz
| | |-- glew-1.5.1-x86_64-1.txz.asc
-| | |-- glproto-1.4.10-noarch-1.txt
-| | |-- glproto-1.4.10-noarch-1.txz
-| | |-- glproto-1.4.10-noarch-1.txz.asc
-| | |-- iceauth-1.0.2-x86_64-2.txt
-| | |-- iceauth-1.0.2-x86_64-2.txz
-| | |-- iceauth-1.0.2-x86_64-2.txz.asc
+| | |-- glproto-1.4.11-noarch-1.txt
+| | |-- glproto-1.4.11-noarch-1.txz
+| | |-- glproto-1.4.11-noarch-1.txz.asc
+| | |-- iceauth-1.0.3-x86_64-1.txt
+| | |-- iceauth-1.0.3-x86_64-1.txz
+| | |-- iceauth-1.0.3-x86_64-1.txz.asc
| | |-- ico-1.0.2-x86_64-2.txt
| | |-- ico-1.0.2-x86_64-2.txz
| | |-- ico-1.0.2-x86_64-2.txz.asc
-| | |-- imake-1.0.2-x86_64-3.txt
-| | |-- imake-1.0.2-x86_64-3.txz
-| | |-- imake-1.0.2-x86_64-3.txz.asc
-| | |-- inputproto-1.5.1-noarch-1.txt
-| | |-- inputproto-1.5.1-noarch-1.txz
-| | |-- inputproto-1.5.1-noarch-1.txz.asc
+| | |-- imake-1.0.3-x86_64-1.txt
+| | |-- imake-1.0.3-x86_64-1.txz
+| | |-- imake-1.0.3-x86_64-1.txz.asc
+| | |-- inputproto-2.0-noarch-1.txt
+| | |-- inputproto-2.0-noarch-1.txz
+| | |-- inputproto-2.0-noarch-1.txz.asc
| | |-- install-packages
| | |-- install.end
-| | |-- intel-gpu-tools-1.0.1-x86_64-1.txt
-| | |-- intel-gpu-tools-1.0.1-x86_64-1.txz
-| | |-- intel-gpu-tools-1.0.1-x86_64-1.txz.asc
-| | |-- kbproto-1.0.3-noarch-2.txt
-| | |-- kbproto-1.0.3-noarch-2.txz
-| | |-- kbproto-1.0.3-noarch-2.txz.asc
-| | |-- lbxproxy-1.0.1-x86_64-2.txt
-| | |-- lbxproxy-1.0.1-x86_64-2.txz
-| | |-- lbxproxy-1.0.1-x86_64-2.txz.asc
+| | |-- intel-gpu-tools-1.0.2-x86_64-1.txt
+| | |-- intel-gpu-tools-1.0.2-x86_64-1.txz
+| | |-- intel-gpu-tools-1.0.2-x86_64-1.txz.asc
+| | |-- kbproto-1.0.4-noarch-1.txt
+| | |-- kbproto-1.0.4-noarch-1.txz
+| | |-- kbproto-1.0.4-noarch-1.txz.asc
| | |-- libFS-1.0.2-x86_64-1.txt
| | |-- libFS-1.0.2-x86_64-1.txz
| | |-- libFS-1.0.2-x86_64-1.txz.asc
-| | |-- libICE-1.0.5-x86_64-2.txt
-| | |-- libICE-1.0.5-x86_64-2.txz
-| | |-- libICE-1.0.5-x86_64-2.txz.asc
-| | |-- libSM-1.1.0-x86_64-1.txt
-| | |-- libSM-1.1.0-x86_64-1.txz
-| | |-- libSM-1.1.0-x86_64-1.txz.asc
-| | |-- libX11-1.2.2-x86_64-1.txt
-| | |-- libX11-1.2.2-x86_64-1.txz
-| | |-- libX11-1.2.2-x86_64-1.txz.asc
-| | |-- libXScrnSaver-1.1.3-x86_64-2.txt
-| | |-- libXScrnSaver-1.1.3-x86_64-2.txz
-| | |-- libXScrnSaver-1.1.3-x86_64-2.txz.asc
+| | |-- libICE-1.0.6-x86_64-1.txt
+| | |-- libICE-1.0.6-x86_64-1.txz
+| | |-- libICE-1.0.6-x86_64-1.txz.asc
+| | |-- libSM-1.1.1-x86_64-1.txt
+| | |-- libSM-1.1.1-x86_64-1.txz
+| | |-- libSM-1.1.1-x86_64-1.txz.asc
+| | |-- libX11-1.3.3-x86_64-1.txt
+| | |-- libX11-1.3.3-x86_64-1.txz
+| | |-- libX11-1.3.3-x86_64-1.txz.asc
+| | |-- libXScrnSaver-1.2.0-x86_64-1.txt
+| | |-- libXScrnSaver-1.2.0-x86_64-1.txz
+| | |-- libXScrnSaver-1.2.0-x86_64-1.txz.asc
| | |-- libXTrap-1.0.0-x86_64-2.txt
| | |-- libXTrap-1.0.0-x86_64-2.txz
| | |-- libXTrap-1.0.0-x86_64-2.txz.asc
-| | |-- libXau-1.0.4-x86_64-2.txt
-| | |-- libXau-1.0.4-x86_64-2.txz
-| | |-- libXau-1.0.4-x86_64-2.txz.asc
-| | |-- libXaw-1.0.6-x86_64-1.txt
-| | |-- libXaw-1.0.6-x86_64-1.txz
-| | |-- libXaw-1.0.6-x86_64-1.txz.asc
-| | |-- libXcomposite-0.4.0-x86_64-2.txt
-| | |-- libXcomposite-0.4.0-x86_64-2.txz
-| | |-- libXcomposite-0.4.0-x86_64-2.txz.asc
-| | |-- libXcursor-1.1.9-x86_64-2.txt
-| | |-- libXcursor-1.1.9-x86_64-2.txz
-| | |-- libXcursor-1.1.9-x86_64-2.txz.asc
-| | |-- libXdamage-1.1.1-x86_64-2.txt
-| | |-- libXdamage-1.1.1-x86_64-2.txz
-| | |-- libXdamage-1.1.1-x86_64-2.txz.asc
-| | |-- libXdmcp-1.0.2-x86_64-2.txt
-| | |-- libXdmcp-1.0.2-x86_64-2.txz
-| | |-- libXdmcp-1.0.2-x86_64-2.txz.asc
+| | |-- libXau-1.0.5-x86_64-1.txt
+| | |-- libXau-1.0.5-x86_64-1.txz
+| | |-- libXau-1.0.5-x86_64-1.txz.asc
+| | |-- libXaw-1.0.7-x86_64-1.txt
+| | |-- libXaw-1.0.7-x86_64-1.txz
+| | |-- libXaw-1.0.7-x86_64-1.txz.asc
+| | |-- libXcomposite-0.4.1-x86_64-1.txt
+| | |-- libXcomposite-0.4.1-x86_64-1.txz
+| | |-- libXcomposite-0.4.1-x86_64-1.txz.asc
+| | |-- libXcursor-1.1.10-x86_64-1.txt
+| | |-- libXcursor-1.1.10-x86_64-1.txz
+| | |-- libXcursor-1.1.10-x86_64-1.txz.asc
+| | |-- libXdamage-1.1.2-x86_64-1.txt
+| | |-- libXdamage-1.1.2-x86_64-1.txz
+| | |-- libXdamage-1.1.2-x86_64-1.txz.asc
+| | |-- libXdmcp-1.0.3-x86_64-1.txt
+| | |-- libXdmcp-1.0.3-x86_64-1.txz
+| | |-- libXdmcp-1.0.3-x86_64-1.txz.asc
| | |-- libXevie-1.0.2-x86_64-2.txt
| | |-- libXevie-1.0.2-x86_64-2.txz
| | |-- libXevie-1.0.2-x86_64-2.txz.asc
-| | |-- libXext-1.0.5-x86_64-1.txt
-| | |-- libXext-1.0.5-x86_64-1.txz
-| | |-- libXext-1.0.5-x86_64-1.txz.asc
-| | |-- libXfixes-4.0.3-x86_64-2.txt
-| | |-- libXfixes-4.0.3-x86_64-2.txz
-| | |-- libXfixes-4.0.3-x86_64-2.txz.asc
-| | |-- libXfont-1.4.0-x86_64-1.txt
-| | |-- libXfont-1.4.0-x86_64-1.txz
-| | |-- libXfont-1.4.0-x86_64-1.txz.asc
-| | |-- libXfontcache-1.0.4-x86_64-2.txt
-| | |-- libXfontcache-1.0.4-x86_64-2.txz
-| | |-- libXfontcache-1.0.4-x86_64-2.txz.asc
-| | |-- libXft-2.1.13-x86_64-2.txt
-| | |-- libXft-2.1.13-x86_64-2.txz
-| | |-- libXft-2.1.13-x86_64-2.txz.asc
-| | |-- libXi-1.2.1-x86_64-1.txt
-| | |-- libXi-1.2.1-x86_64-1.txz
-| | |-- libXi-1.2.1-x86_64-1.txz.asc
-| | |-- libXinerama-1.0.3-x86_64-2.txt
-| | |-- libXinerama-1.0.3-x86_64-2.txz
-| | |-- libXinerama-1.0.3-x86_64-2.txz.asc
-| | |-- libXmu-1.0.4-x86_64-2.txt
-| | |-- libXmu-1.0.4-x86_64-2.txz
-| | |-- libXmu-1.0.4-x86_64-2.txz.asc
+| | |-- libXext-1.1-x86_64-1.txt
+| | |-- libXext-1.1-x86_64-1.txz
+| | |-- libXext-1.1-x86_64-1.txz.asc
+| | |-- libXfixes-4.0.4-x86_64-1.txt
+| | |-- libXfixes-4.0.4-x86_64-1.txz
+| | |-- libXfixes-4.0.4-x86_64-1.txz.asc
+| | |-- libXfont-1.4.1-x86_64-1.txt
+| | |-- libXfont-1.4.1-x86_64-1.txz
+| | |-- libXfont-1.4.1-x86_64-1.txz.asc
+| | |-- libXfontcache-1.0.5-x86_64-1.txt
+| | |-- libXfontcache-1.0.5-x86_64-1.txz
+| | |-- libXfontcache-1.0.5-x86_64-1.txz.asc
+| | |-- libXft-2.1.14-x86_64-1.txt
+| | |-- libXft-2.1.14-x86_64-1.txz
+| | |-- libXft-2.1.14-x86_64-1.txz.asc
+| | |-- libXi-1.3-x86_64-1.txt
+| | |-- libXi-1.3-x86_64-1.txz
+| | |-- libXi-1.3-x86_64-1.txz.asc
+| | |-- libXinerama-1.1-x86_64-1.txt
+| | |-- libXinerama-1.1-x86_64-1.txz
+| | |-- libXinerama-1.1-x86_64-1.txz.asc
+| | |-- libXmu-1.0.5-x86_64-1.txt
+| | |-- libXmu-1.0.5-x86_64-1.txz
+| | |-- libXmu-1.0.5-x86_64-1.txz.asc
| | |-- libXp-1.0.0-x86_64-2.txt
| | |-- libXp-1.0.0-x86_64-2.txz
| | |-- libXp-1.0.0-x86_64-2.txz.asc
-| | |-- libXpm-3.5.7-x86_64-2.txt
-| | |-- libXpm-3.5.7-x86_64-2.txz
-| | |-- libXpm-3.5.7-x86_64-2.txz.asc
+| | |-- libXpm-3.5.8-x86_64-1.txt
+| | |-- libXpm-3.5.8-x86_64-1.txz
+| | |-- libXpm-3.5.8-x86_64-1.txz.asc
| | |-- libXprintAppUtil-1.0.1-x86_64-2.txt
| | |-- libXprintAppUtil-1.0.1-x86_64-2.txz
| | |-- libXprintAppUtil-1.0.1-x86_64-2.txz.asc
@@ -2899,122 +2996,116 @@ see additional documentation files. | | |-- libXrandr-1.3.0-x86_64-1.txt
| | |-- libXrandr-1.3.0-x86_64-1.txz
| | |-- libXrandr-1.3.0-x86_64-1.txz.asc
-| | |-- libXrender-0.9.4-x86_64-2.txt
-| | |-- libXrender-0.9.4-x86_64-2.txz
-| | |-- libXrender-0.9.4-x86_64-2.txz.asc
-| | |-- libXres-1.0.3-x86_64-2.txt
-| | |-- libXres-1.0.3-x86_64-2.txz
-| | |-- libXres-1.0.3-x86_64-2.txz.asc
-| | |-- libXt-1.0.6-x86_64-1.txt
-| | |-- libXt-1.0.6-x86_64-1.txz
-| | |-- libXt-1.0.6-x86_64-1.txz.asc
-| | |-- libXtst-1.0.3-x86_64-2.txt
-| | |-- libXtst-1.0.3-x86_64-2.txz
-| | |-- libXtst-1.0.3-x86_64-2.txz.asc
-| | |-- libXv-1.0.4-x86_64-2.txt
-| | |-- libXv-1.0.4-x86_64-2.txz
-| | |-- libXv-1.0.4-x86_64-2.txz.asc
-| | |-- libXvMC-1.0.4-x86_64-2.txt
-| | |-- libXvMC-1.0.4-x86_64-2.txz
-| | |-- libXvMC-1.0.4-x86_64-2.txz.asc
-| | |-- libXxf86dga-1.0.2-x86_64-2.txt
-| | |-- libXxf86dga-1.0.2-x86_64-2.txz
-| | |-- libXxf86dga-1.0.2-x86_64-2.txz.asc
-| | |-- libXxf86misc-1.0.1-x86_64-2.txt
-| | |-- libXxf86misc-1.0.1-x86_64-2.txz
-| | |-- libXxf86misc-1.0.1-x86_64-2.txz.asc
-| | |-- libXxf86vm-1.0.2-x86_64-2.txt
-| | |-- libXxf86vm-1.0.2-x86_64-2.txz
-| | |-- libXxf86vm-1.0.2-x86_64-2.txz.asc
-| | |-- libdmx-1.0.2-x86_64-2.txt
-| | |-- libdmx-1.0.2-x86_64-2.txz
-| | |-- libdmx-1.0.2-x86_64-2.txz.asc
-| | |-- libdrm-2.4.12-x86_64-1.txt
-| | |-- libdrm-2.4.12-x86_64-1.txz
-| | |-- libdrm-2.4.12-x86_64-1.txz.asc
+| | |-- libXrender-0.9.5-x86_64-1.txt
+| | |-- libXrender-0.9.5-x86_64-1.txz
+| | |-- libXrender-0.9.5-x86_64-1.txz.asc
+| | |-- libXres-1.0.4-x86_64-1.txt
+| | |-- libXres-1.0.4-x86_64-1.txz
+| | |-- libXres-1.0.4-x86_64-1.txz.asc
+| | |-- libXt-1.0.8-x86_64-1.txt
+| | |-- libXt-1.0.8-x86_64-1.txz
+| | |-- libXt-1.0.8-x86_64-1.txz.asc
+| | |-- libXtst-1.1.0-x86_64-1.txt
+| | |-- libXtst-1.1.0-x86_64-1.txz
+| | |-- libXtst-1.1.0-x86_64-1.txz.asc
+| | |-- libXv-1.0.5-x86_64-1.txt
+| | |-- libXv-1.0.5-x86_64-1.txz
+| | |-- libXv-1.0.5-x86_64-1.txz.asc
+| | |-- libXvMC-1.0.5-x86_64-1.txt
+| | |-- libXvMC-1.0.5-x86_64-1.txz
+| | |-- libXvMC-1.0.5-x86_64-1.txz.asc
+| | |-- libXxf86dga-1.1.1-x86_64-1.txt
+| | |-- libXxf86dga-1.1.1-x86_64-1.txz
+| | |-- libXxf86dga-1.1.1-x86_64-1.txz.asc
+| | |-- libXxf86misc-1.0.2-x86_64-1.txt
+| | |-- libXxf86misc-1.0.2-x86_64-1.txz
+| | |-- libXxf86misc-1.0.2-x86_64-1.txz.asc
+| | |-- libXxf86vm-1.1.0-x86_64-1.txt
+| | |-- libXxf86vm-1.1.0-x86_64-1.txz
+| | |-- libXxf86vm-1.1.0-x86_64-1.txz.asc
+| | |-- libdmx-1.1.0-x86_64-1.txt
+| | |-- libdmx-1.1.0-x86_64-1.txz
+| | |-- libdmx-1.1.0-x86_64-1.txz.asc
+| | |-- libdrm-2.4.20-x86_64-1.txt
+| | |-- libdrm-2.4.20-x86_64-1.txz
+| | |-- libdrm-2.4.20-x86_64-1.txz.asc
| | |-- liberation-fonts-ttf-1.04-noarch-1.txt
| | |-- liberation-fonts-ttf-1.04-noarch-1.txz
| | |-- liberation-fonts-ttf-1.04-noarch-1.txz.asc
-| | |-- libfontenc-1.0.4-x86_64-2.txt
-| | |-- libfontenc-1.0.4-x86_64-2.txz
-| | |-- libfontenc-1.0.4-x86_64-2.txz.asc
+| | |-- libfontenc-1.0.5-x86_64-1.txt
+| | |-- libfontenc-1.0.5-x86_64-1.txz
+| | |-- libfontenc-1.0.5-x86_64-1.txz.asc
| | |-- libhangul-0.0.7-x86_64-1.txt
| | |-- libhangul-0.0.7-x86_64-1.txz
| | |-- libhangul-0.0.7-x86_64-1.txz.asc
-| | |-- liblbxutil-1.0.1-x86_64-2.txt
-| | |-- liblbxutil-1.0.1-x86_64-2.txz
-| | |-- liblbxutil-1.0.1-x86_64-2.txz.asc
-| | |-- libpciaccess-0.10.6-x86_64-1.txt
-| | |-- libpciaccess-0.10.6-x86_64-1.txz
-| | |-- libpciaccess-0.10.6-x86_64-1.txz.asc
-| | |-- libpthread-stubs-0.1-noarch-2.txt
-| | |-- libpthread-stubs-0.1-noarch-2.txz
-| | |-- libpthread-stubs-0.1-noarch-2.txz.asc
-| | |-- libxcb-1.3-x86_64-1.txt
-| | |-- libxcb-1.3-x86_64-1.txz
-| | |-- libxcb-1.3-x86_64-1.txz.asc
-| | |-- libxkbfile-1.0.5-x86_64-2.txt
-| | |-- libxkbfile-1.0.5-x86_64-2.txz
-| | |-- libxkbfile-1.0.5-x86_64-2.txz.asc
+| | |-- libpciaccess-0.11.0-x86_64-1.txt
+| | |-- libpciaccess-0.11.0-x86_64-1.txz
+| | |-- libpciaccess-0.11.0-x86_64-1.txz.asc
+| | |-- libpthread-stubs-0.3-noarch-1.txt
+| | |-- libpthread-stubs-0.3-noarch-1.txz
+| | |-- libpthread-stubs-0.3-noarch-1.txz.asc
+| | |-- libxcb-1.6-x86_64-1.txt
+| | |-- libxcb-1.6-x86_64-1.txz
+| | |-- libxcb-1.6-x86_64-1.txz.asc
+| | |-- libxkbfile-1.0.6-x86_64-1.txt
+| | |-- libxkbfile-1.0.6-x86_64-1.txz
+| | |-- libxkbfile-1.0.6-x86_64-1.txz.asc
| | |-- libxkbui-1.0.2-x86_64-2.txt
| | |-- libxkbui-1.0.2-x86_64-2.txz
| | |-- libxkbui-1.0.2-x86_64-2.txz.asc
-| | |-- listres-1.0.1-x86_64-2.txt
-| | |-- listres-1.0.1-x86_64-2.txz
-| | |-- listres-1.0.1-x86_64-2.txz.asc
+| | |-- listres-1.0.2-x86_64-1.txt
+| | |-- listres-1.0.2-x86_64-1.txz
+| | |-- listres-1.0.2-x86_64-1.txz.asc
| | |-- lndir-1.0.1-x86_64-2.txt
| | |-- lndir-1.0.1-x86_64-2.txz
| | |-- lndir-1.0.1-x86_64-2.txz.asc
-| | |-- luit-1.0.3-x86_64-2.txt
-| | |-- luit-1.0.3-x86_64-2.txz
-| | |-- luit-1.0.3-x86_64-2.txz.asc
+| | |-- luit-1.0.5-x86_64-1.txt
+| | |-- luit-1.0.5-x86_64-1.txz
+| | |-- luit-1.0.5-x86_64-1.txz.asc
| | |-- m17n-lib-1.5.4-x86_64-1.txt
| | |-- m17n-lib-1.5.4-x86_64-1.txz
| | |-- m17n-lib-1.5.4-x86_64-1.txz.asc
-| | |-- makedepend-1.0.1-x86_64-2.txt
-| | |-- makedepend-1.0.1-x86_64-2.txz
-| | |-- makedepend-1.0.1-x86_64-2.txz.asc
+| | |-- makedepend-1.0.2-x86_64-1.txt
+| | |-- makedepend-1.0.2-x86_64-1.txz
+| | |-- makedepend-1.0.2-x86_64-1.txz.asc
| | |-- maketag
| | |-- maketag.ez
-| | |-- mesa-7.5-x86_64-1.txt
-| | |-- mesa-7.5-x86_64-1.txz
-| | |-- mesa-7.5-x86_64-1.txz.asc
-| | |-- mkcomposecache-1.2-x86_64-2.txt
-| | |-- mkcomposecache-1.2-x86_64-2.txz
-| | |-- mkcomposecache-1.2-x86_64-2.txz.asc
-| | |-- mkfontdir-1.0.4-noarch-2.txt
-| | |-- mkfontdir-1.0.4-noarch-2.txz
-| | |-- mkfontdir-1.0.4-noarch-2.txz.asc
-| | |-- mkfontscale-1.0.6-x86_64-1.txt
-| | |-- mkfontscale-1.0.6-x86_64-1.txz
-| | |-- mkfontscale-1.0.6-x86_64-1.txz.asc
+| | |-- mesa-7.8.1-x86_64-1.txt
+| | |-- mesa-7.8.1-x86_64-1.txz
+| | |-- mesa-7.8.1-x86_64-1.txz.asc
+| | |-- mkcomposecache-1.2.1-x86_64-1.txt
+| | |-- mkcomposecache-1.2.1-x86_64-1.txz
+| | |-- mkcomposecache-1.2.1-x86_64-1.txz.asc
+| | |-- mkfontdir-1.0.5-noarch-1.txt
+| | |-- mkfontdir-1.0.5-noarch-1.txz
+| | |-- mkfontdir-1.0.5-noarch-1.txz.asc
+| | |-- mkfontscale-1.0.7-x86_64-1.txt
+| | |-- mkfontscale-1.0.7-x86_64-1.txz
+| | |-- mkfontscale-1.0.7-x86_64-1.txz.asc
| | |-- oclock-1.0.1-x86_64-2.txt
| | |-- oclock-1.0.1-x86_64-2.txz
| | |-- oclock-1.0.1-x86_64-2.txz.asc
-| | |-- pixman-0.15.18-x86_64-1.txt
-| | |-- pixman-0.15.18-x86_64-1.txz
-| | |-- pixman-0.15.18-x86_64-1.txz.asc
+| | |-- pixman-0.16.6-x86_64-1.txt
+| | |-- pixman-0.16.6-x86_64-1.txz
+| | |-- pixman-0.16.6-x86_64-1.txz.asc
| | |-- printproto-1.0.4-noarch-2.txt
| | |-- printproto-1.0.4-noarch-2.txz
| | |-- printproto-1.0.4-noarch-2.txz.asc
-| | |-- proxymngr-1.0.1-x86_64-2.txt
-| | |-- proxymngr-1.0.1-x86_64-2.txz
-| | |-- proxymngr-1.0.1-x86_64-2.txz.asc
-| | |-- randrproto-1.3.0-noarch-1.txt
-| | |-- randrproto-1.3.0-noarch-1.txz
-| | |-- randrproto-1.3.0-noarch-1.txz.asc
-| | |-- recordproto-1.13.2-noarch-2.txt
-| | |-- recordproto-1.13.2-noarch-2.txz
-| | |-- recordproto-1.13.2-noarch-2.txz.asc
+| | |-- randrproto-1.3.1-noarch-1.txt
+| | |-- randrproto-1.3.1-noarch-1.txz
+| | |-- randrproto-1.3.1-noarch-1.txz.asc
+| | |-- recordproto-1.14-noarch-1.txt
+| | |-- recordproto-1.14-noarch-1.txz
+| | |-- recordproto-1.14-noarch-1.txz.asc
| | |-- rendercheck-1.3-x86_64-2.txt
| | |-- rendercheck-1.3-x86_64-2.txz
| | |-- rendercheck-1.3-x86_64-2.txz.asc
| | |-- renderproto-0.11-noarch-1.txt
| | |-- renderproto-0.11-noarch-1.txz
| | |-- renderproto-0.11-noarch-1.txz.asc
-| | |-- resourceproto-1.0.2-noarch-2.txt
-| | |-- resourceproto-1.0.2-noarch-2.txz
-| | |-- resourceproto-1.0.2-noarch-2.txz.asc
+| | |-- resourceproto-1.1.0-noarch-1.txt
+| | |-- resourceproto-1.1.0-noarch-1.txz
+| | |-- resourceproto-1.1.0-noarch-1.txz.asc
| | |-- rgb-1.0.3-x86_64-1.txt
| | |-- rgb-1.0.3-x86_64-1.txz
| | |-- rgb-1.0.3-x86_64-1.txz.asc
@@ -3051,12 +3142,12 @@ see additional documentation files. | | |-- scripts-1.0.1-noarch-2.txt
| | |-- scripts-1.0.1-noarch-2.txz
| | |-- scripts-1.0.1-noarch-2.txz.asc
-| | |-- scrnsaverproto-1.1.0-noarch-2.txt
-| | |-- scrnsaverproto-1.1.0-noarch-2.txz
-| | |-- scrnsaverproto-1.1.0-noarch-2.txz.asc
-| | |-- sessreg-1.0.4-x86_64-1.txt
-| | |-- sessreg-1.0.4-x86_64-1.txz
-| | |-- sessreg-1.0.4-x86_64-1.txz.asc
+| | |-- scrnsaverproto-1.2.0-noarch-1.txt
+| | |-- scrnsaverproto-1.2.0-noarch-1.txz
+| | |-- scrnsaverproto-1.2.0-noarch-1.txz.asc
+| | |-- sessreg-1.0.5-x86_64-1.txt
+| | |-- sessreg-1.0.5-x86_64-1.txz
+| | |-- sessreg-1.0.5-x86_64-1.txz.asc
| | |-- setxkbmap-1.1.0-x86_64-1.txt
| | |-- setxkbmap-1.1.0-x86_64-1.txz
| | |-- setxkbmap-1.1.0-x86_64-1.txz.asc
@@ -3066,9 +3157,9 @@ see additional documentation files. | | |-- sinhala_lklug-font-ttf-20060929-noarch-1.txt
| | |-- sinhala_lklug-font-ttf-20060929-noarch-1.txz
| | |-- sinhala_lklug-font-ttf-20060929-noarch-1.txz.asc
-| | |-- smproxy-1.0.2-x86_64-2.txt
-| | |-- smproxy-1.0.2-x86_64-2.txz
-| | |-- smproxy-1.0.2-x86_64-2.txz.asc
+| | |-- smproxy-1.0.3-x86_64-1.txt
+| | |-- smproxy-1.0.3-x86_64-1.txz
+| | |-- smproxy-1.0.3-x86_64-1.txz.asc
| | |-- tagfile
| | |-- tibmachuni-font-ttf-1.901-noarch-1.txt
| | |-- tibmachuni-font-ttf-1.901-noarch-1.txz
@@ -3079,273 +3170,264 @@ see additional documentation files. | | |-- ttf-indic-fonts-0.4.7.4-noarch-1.txt
| | |-- ttf-indic-fonts-0.4.7.4-noarch-1.txz
| | |-- ttf-indic-fonts-0.4.7.4-noarch-1.txz.asc
-| | |-- twm-1.0.4-x86_64-2.txt
-| | |-- twm-1.0.4-x86_64-2.txz
-| | |-- twm-1.0.4-x86_64-2.txz.asc
-| | |-- util-macros-1.2.2-noarch-1.txt
-| | |-- util-macros-1.2.2-noarch-1.txz
-| | |-- util-macros-1.2.2-noarch-1.txz.asc
-| | |-- videoproto-2.2.2-noarch-2.txt
-| | |-- videoproto-2.2.2-noarch-2.txz
-| | |-- videoproto-2.2.2-noarch-2.txz.asc
-| | |-- viewres-1.0.1-x86_64-3.txt
-| | |-- viewres-1.0.1-x86_64-3.txz
-| | |-- viewres-1.0.1-x86_64-3.txz.asc
+| | |-- twm-1.0.4-x86_64-3.txt
+| | |-- twm-1.0.4-x86_64-3.txz
+| | |-- twm-1.0.4-x86_64-3.txz.asc
+| | |-- util-macros-1.7.0-noarch-1.txt
+| | |-- util-macros-1.7.0-noarch-1.txz
+| | |-- util-macros-1.7.0-noarch-1.txz.asc
+| | |-- videoproto-2.3.0-noarch-1.txt
+| | |-- videoproto-2.3.0-noarch-1.txz
+| | |-- videoproto-2.3.0-noarch-1.txz.asc
+| | |-- viewres-1.0.2-x86_64-1.txt
+| | |-- viewres-1.0.2-x86_64-1.txz
+| | |-- viewres-1.0.2-x86_64-1.txz.asc
| | |-- wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txt
| | |-- wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz
| | |-- wqy-zenhei-font-ttf-0.8.38_1-noarch-1.txz.asc
| | |-- x11-skel-7.4-x86_64-1.txt
| | |-- x11-skel-7.4-x86_64-1.txz
| | |-- x11-skel-7.4-x86_64-1.txz.asc
-| | |-- x11perf-1.5-x86_64-2.txt
-| | |-- x11perf-1.5-x86_64-2.txz
-| | |-- x11perf-1.5-x86_64-2.txz.asc
-| | |-- xauth-1.0.3-x86_64-2.txt
-| | |-- xauth-1.0.3-x86_64-2.txz
-| | |-- xauth-1.0.3-x86_64-2.txz.asc
+| | |-- x11perf-1.5.1-x86_64-1.txt
+| | |-- x11perf-1.5.1-x86_64-1.txz
+| | |-- x11perf-1.5.1-x86_64-1.txz.asc
+| | |-- xauth-1.0.4-x86_64-1.txt
+| | |-- xauth-1.0.4-x86_64-1.txz
+| | |-- xauth-1.0.4-x86_64-1.txz.asc
| | |-- xaw3d-1.5E-x86_64-1.txt
| | |-- xaw3d-1.5E-x86_64-1.txz
| | |-- xaw3d-1.5E-x86_64-1.txz.asc
-| | |-- xbacklight-1.1-x86_64-2.txt
-| | |-- xbacklight-1.1-x86_64-2.txz
-| | |-- xbacklight-1.1-x86_64-2.txz.asc
-| | |-- xbiff-1.0.1-x86_64-2.txt
-| | |-- xbiff-1.0.1-x86_64-2.txz
-| | |-- xbiff-1.0.1-x86_64-2.txz.asc
-| | |-- xbitmaps-1.0.1-noarch-2.txt
-| | |-- xbitmaps-1.0.1-noarch-2.txz
-| | |-- xbitmaps-1.0.1-noarch-2.txz.asc
-| | |-- xcalc-1.0.2-x86_64-2.txt
-| | |-- xcalc-1.0.2-x86_64-2.txz
-| | |-- xcalc-1.0.2-x86_64-2.txz.asc
-| | |-- xcb-proto-1.5-noarch-1.txt
-| | |-- xcb-proto-1.5-noarch-1.txz
-| | |-- xcb-proto-1.5-noarch-1.txz.asc
-| | |-- xcb-util-0.3.5-x86_64-1.txt
-| | |-- xcb-util-0.3.5-x86_64-1.txz
-| | |-- xcb-util-0.3.5-x86_64-1.txz.asc
-| | |-- xclipboard-1.0.1-x86_64-2.txt
-| | |-- xclipboard-1.0.1-x86_64-2.txz
-| | |-- xclipboard-1.0.1-x86_64-2.txz.asc
-| | |-- xclock-1.0.3-x86_64-2.txt
-| | |-- xclock-1.0.3-x86_64-2.txz
-| | |-- xclock-1.0.3-x86_64-2.txz.asc
-| | |-- xcmiscproto-1.1.2-noarch-2.txt
-| | |-- xcmiscproto-1.1.2-noarch-2.txz
-| | |-- xcmiscproto-1.1.2-noarch-2.txz.asc
-| | |-- xcmsdb-1.0.1-x86_64-2.txt
-| | |-- xcmsdb-1.0.1-x86_64-2.txz
-| | |-- xcmsdb-1.0.1-x86_64-2.txz.asc
-| | |-- xcompmgr-1.1.4-x86_64-2.txt
-| | |-- xcompmgr-1.1.4-x86_64-2.txz
-| | |-- xcompmgr-1.1.4-x86_64-2.txz.asc
+| | |-- xbacklight-1.1.1-x86_64-1.txt
+| | |-- xbacklight-1.1.1-x86_64-1.txz
+| | |-- xbacklight-1.1.1-x86_64-1.txz.asc
+| | |-- xbiff-1.0.2-x86_64-1.txt
+| | |-- xbiff-1.0.2-x86_64-1.txz
+| | |-- xbiff-1.0.2-x86_64-1.txz.asc
+| | |-- xbitmaps-1.1.0-noarch-1.txt
+| | |-- xbitmaps-1.1.0-noarch-1.txz
+| | |-- xbitmaps-1.1.0-noarch-1.txz.asc
+| | |-- xcalc-1.0.3-x86_64-1.txt
+| | |-- xcalc-1.0.3-x86_64-1.txz
+| | |-- xcalc-1.0.3-x86_64-1.txz.asc
+| | |-- xcb-proto-1.6-noarch-1.txt
+| | |-- xcb-proto-1.6-noarch-1.txz
+| | |-- xcb-proto-1.6-noarch-1.txz.asc
+| | |-- xcb-util-0.3.6-x86_64-1.txt
+| | |-- xcb-util-0.3.6-x86_64-1.txz
+| | |-- xcb-util-0.3.6-x86_64-1.txz.asc
+| | |-- xclipboard-1.1.0-x86_64-1.txt
+| | |-- xclipboard-1.1.0-x86_64-1.txz
+| | |-- xclipboard-1.1.0-x86_64-1.txz.asc
+| | |-- xclock-1.0.4-x86_64-1.txt
+| | |-- xclock-1.0.4-x86_64-1.txz
+| | |-- xclock-1.0.4-x86_64-1.txz.asc
+| | |-- xcmiscproto-1.2.0-noarch-1.txt
+| | |-- xcmiscproto-1.2.0-noarch-1.txz
+| | |-- xcmiscproto-1.2.0-noarch-1.txz.asc
+| | |-- xcmsdb-1.0.2-x86_64-1.txt
+| | |-- xcmsdb-1.0.2-x86_64-1.txz
+| | |-- xcmsdb-1.0.2-x86_64-1.txz.asc
+| | |-- xcompmgr-1.1.5-x86_64-1.txt
+| | |-- xcompmgr-1.1.5-x86_64-1.txz
+| | |-- xcompmgr-1.1.5-x86_64-1.txz.asc
| | |-- xconsole-1.0.3-x86_64-2.txt
| | |-- xconsole-1.0.3-x86_64-2.txz
| | |-- xconsole-1.0.3-x86_64-2.txz.asc
-| | |-- xcursor-themes-1.0.1-noarch-2.txt
-| | |-- xcursor-themes-1.0.1-noarch-2.txz
-| | |-- xcursor-themes-1.0.1-noarch-2.txz.asc
-| | |-- xcursorgen-1.0.2-x86_64-2.txt
-| | |-- xcursorgen-1.0.2-x86_64-2.txz
-| | |-- xcursorgen-1.0.2-x86_64-2.txz.asc
+| | |-- xcursor-themes-1.0.2-noarch-1.txt
+| | |-- xcursor-themes-1.0.2-noarch-1.txz
+| | |-- xcursor-themes-1.0.2-noarch-1.txz.asc
+| | |-- xcursorgen-1.0.3-x86_64-1.txt
+| | |-- xcursorgen-1.0.3-x86_64-1.txz
+| | |-- xcursorgen-1.0.3-x86_64-1.txz.asc
| | |-- xdbedizzy-1.0.2-x86_64-2.txt
| | |-- xdbedizzy-1.0.2-x86_64-2.txz
| | |-- xdbedizzy-1.0.2-x86_64-2.txz.asc
-| | |-- xdg-utils-1.0.2-noarch-3.txt
-| | |-- xdg-utils-1.0.2-noarch-3.txz
-| | |-- xdg-utils-1.0.2-noarch-3.txz.asc
+| | |-- xdg-utils-1.0.2-noarch-4.txt
+| | |-- xdg-utils-1.0.2-noarch-4.txz
+| | |-- xdg-utils-1.0.2-noarch-4.txz.asc
| | |-- xditview-1.0.1-x86_64-2.txt
| | |-- xditview-1.0.1-x86_64-2.txz
| | |-- xditview-1.0.1-x86_64-2.txz.asc
-| | |-- xdm-1.1.8-x86_64-1.txt
-| | |-- xdm-1.1.8-x86_64-1.txz
-| | |-- xdm-1.1.8-x86_64-1.txz.asc
-| | |-- xdpyinfo-1.0.3-x86_64-1.txt
-| | |-- xdpyinfo-1.0.3-x86_64-1.txz
-| | |-- xdpyinfo-1.0.3-x86_64-1.txz.asc
-| | |-- xdriinfo-1.0.2-x86_64-2.txt
-| | |-- xdriinfo-1.0.2-x86_64-2.txz
-| | |-- xdriinfo-1.0.2-x86_64-2.txz.asc
+| | |-- xdm-1.1.10-x86_64-1.txt
+| | |-- xdm-1.1.10-x86_64-1.txz
+| | |-- xdm-1.1.10-x86_64-1.txz.asc
+| | |-- xdpyinfo-1.1.0-x86_64-1.txt
+| | |-- xdpyinfo-1.1.0-x86_64-1.txz
+| | |-- xdpyinfo-1.1.0-x86_64-1.txz.asc
+| | |-- xdriinfo-1.0.3-x86_64-1.txt
+| | |-- xdriinfo-1.0.3-x86_64-1.txz
+| | |-- xdriinfo-1.0.3-x86_64-1.txz.asc
| | |-- xedit-1.1.2-x86_64-1.txt
| | |-- xedit-1.1.2-x86_64-1.txz
| | |-- xedit-1.1.2-x86_64-1.txz.asc
-| | |-- xev-1.0.3-x86_64-2.txt
-| | |-- xev-1.0.3-x86_64-2.txz
-| | |-- xev-1.0.3-x86_64-2.txz.asc
-| | |-- xextproto-7.0.5-noarch-1.txt
-| | |-- xextproto-7.0.5-noarch-1.txz
-| | |-- xextproto-7.0.5-noarch-1.txz.asc
-| | |-- xeyes-1.0.1-x86_64-2.txt
-| | |-- xeyes-1.0.1-x86_64-2.txz
-| | |-- xeyes-1.0.1-x86_64-2.txz.asc
-| | |-- xf86-input-acecad-1.3.0-x86_64-1.txt
-| | |-- xf86-input-acecad-1.3.0-x86_64-1.txz
-| | |-- xf86-input-acecad-1.3.0-x86_64-1.txz.asc
-| | |-- xf86-input-aiptek-1.2.0-x86_64-1.txt
-| | |-- xf86-input-aiptek-1.2.0-x86_64-1.txz
-| | |-- xf86-input-aiptek-1.2.0-x86_64-1.txz.asc
-| | |-- xf86-input-citron-2.2.2-x86_64-1.txt
-| | |-- xf86-input-citron-2.2.2-x86_64-1.txz
-| | |-- xf86-input-citron-2.2.2-x86_64-1.txz.asc
-| | |-- xf86-input-elographics-1.2.3-x86_64-2.txt
-| | |-- xf86-input-elographics-1.2.3-x86_64-2.txz
-| | |-- xf86-input-elographics-1.2.3-x86_64-2.txz.asc
-| | |-- xf86-input-evdev-2.2.5-x86_64-1.txt
-| | |-- xf86-input-evdev-2.2.5-x86_64-1.txz
-| | |-- xf86-input-evdev-2.2.5-x86_64-1.txz.asc
-| | |-- xf86-input-fpit-1.3.0-x86_64-1.txt
-| | |-- xf86-input-fpit-1.3.0-x86_64-1.txz
-| | |-- xf86-input-fpit-1.3.0-x86_64-1.txz.asc
-| | |-- xf86-input-hyperpen-1.3.0-x86_64-1.txt
-| | |-- xf86-input-hyperpen-1.3.0-x86_64-1.txz
-| | |-- xf86-input-hyperpen-1.3.0-x86_64-1.txz.asc
-| | |-- xf86-input-joystick-1.4.0-x86_64-1.txt
-| | |-- xf86-input-joystick-1.4.0-x86_64-1.txz
-| | |-- xf86-input-joystick-1.4.0-x86_64-1.txz.asc
-| | |-- xf86-input-keyboard-1.3.2-x86_64-1.txt
-| | |-- xf86-input-keyboard-1.3.2-x86_64-1.txz
-| | |-- xf86-input-keyboard-1.3.2-x86_64-1.txz.asc
-| | |-- xf86-input-mouse-1.4.0-x86_64-1.txt
-| | |-- xf86-input-mouse-1.4.0-x86_64-1.txz
-| | |-- xf86-input-mouse-1.4.0-x86_64-1.txz.asc
-| | |-- xf86-input-mutouch-1.2.1-x86_64-2.txt
-| | |-- xf86-input-mutouch-1.2.1-x86_64-2.txz
-| | |-- xf86-input-mutouch-1.2.1-x86_64-2.txz.asc
-| | |-- xf86-input-penmount-1.4.0-x86_64-1.txt
-| | |-- xf86-input-penmount-1.4.0-x86_64-1.txz
-| | |-- xf86-input-penmount-1.4.0-x86_64-1.txz.asc
-| | |-- xf86-input-synaptics-1.1.3-x86_64-1.txt
-| | |-- xf86-input-synaptics-1.1.3-x86_64-1.txz
-| | |-- xf86-input-synaptics-1.1.3-x86_64-1.txz.asc
-| | |-- xf86-input-vmmouse-12.6.4-x86_64-1.txt
-| | |-- xf86-input-vmmouse-12.6.4-x86_64-1.txz
-| | |-- xf86-input-vmmouse-12.6.4-x86_64-1.txz.asc
-| | |-- xf86-input-void-1.2.0-x86_64-1.txt
-| | |-- xf86-input-void-1.2.0-x86_64-1.txz
-| | |-- xf86-input-void-1.2.0-x86_64-1.txz.asc
-| | |-- xf86-video-apm-1.2.2-x86_64-1.txt
-| | |-- xf86-video-apm-1.2.2-x86_64-1.txz
-| | |-- xf86-video-apm-1.2.2-x86_64-1.txz.asc
-| | |-- xf86-video-ark-0.7.1-x86_64-1.txt
-| | |-- xf86-video-ark-0.7.1-x86_64-1.txz
-| | |-- xf86-video-ark-0.7.1-x86_64-1.txz.asc
-| | |-- xf86-video-ast-0.89.9-x86_64-1.txt
-| | |-- xf86-video-ast-0.89.9-x86_64-1.txz
-| | |-- xf86-video-ast-0.89.9-x86_64-1.txz.asc
-| | |-- xf86-video-ati-6.12.2-x86_64-2.txt
-| | |-- xf86-video-ati-6.12.2-x86_64-2.txz
-| | |-- xf86-video-ati-6.12.2-x86_64-2.txz.asc
-| | |-- xf86-video-chips-1.2.1-x86_64-1.txt
-| | |-- xf86-video-chips-1.2.1-x86_64-1.txz
-| | |-- xf86-video-chips-1.2.1-x86_64-1.txz.asc
-| | |-- xf86-video-cirrus-1.3.2-x86_64-1.txt
-| | |-- xf86-video-cirrus-1.3.2-x86_64-1.txz
-| | |-- xf86-video-cirrus-1.3.2-x86_64-1.txz.asc
-| | |-- xf86-video-dummy-0.3.2-x86_64-1.txt
-| | |-- xf86-video-dummy-0.3.2-x86_64-1.txz
-| | |-- xf86-video-dummy-0.3.2-x86_64-1.txz.asc
-| | |-- xf86-video-glint-1.2.4-x86_64-1.txt
-| | |-- xf86-video-glint-1.2.4-x86_64-1.txz
-| | |-- xf86-video-glint-1.2.4-x86_64-1.txz.asc
-| | |-- xf86-video-i128-1.3.3-x86_64-1.txt
-| | |-- xf86-video-i128-1.3.3-x86_64-1.txz
-| | |-- xf86-video-i128-1.3.3-x86_64-1.txz.asc
-| | |-- xf86-video-i740-1.3.2-x86_64-1.txt
-| | |-- xf86-video-i740-1.3.2-x86_64-1.txz
-| | |-- xf86-video-i740-1.3.2-x86_64-1.txz.asc
-| | |-- xf86-video-intel-2.8.0-x86_64-1.txt
-| | |-- xf86-video-intel-2.8.0-x86_64-1.txz
-| | |-- xf86-video-intel-2.8.0-x86_64-1.txz.asc
-| | |-- xf86-video-mach64-6.8.2-x86_64-1.txt
-| | |-- xf86-video-mach64-6.8.2-x86_64-1.txz
-| | |-- xf86-video-mach64-6.8.2-x86_64-1.txz.asc
-| | |-- xf86-video-mga-1.4.11-x86_64-1.txt
-| | |-- xf86-video-mga-1.4.11-x86_64-1.txz
-| | |-- xf86-video-mga-1.4.11-x86_64-1.txz.asc
-| | |-- xf86-video-neomagic-1.2.4-x86_64-1.txt
-| | |-- xf86-video-neomagic-1.2.4-x86_64-1.txz
-| | |-- xf86-video-neomagic-1.2.4-x86_64-1.txz.asc
-| | |-- xf86-video-newport-0.2.2-x86_64-1.txt
-| | |-- xf86-video-newport-0.2.2-x86_64-1.txz
-| | |-- xf86-video-newport-0.2.2-x86_64-1.txz.asc
-| | |-- xf86-video-nv-2.1.14-x86_64-1.txt
-| | |-- xf86-video-nv-2.1.14-x86_64-1.txz
-| | |-- xf86-video-nv-2.1.14-x86_64-1.txz.asc
-| | |-- xf86-video-openchrome-0.2.903-x86_64-2.txt
-| | |-- xf86-video-openchrome-0.2.903-x86_64-2.txz
-| | |-- xf86-video-openchrome-0.2.903-x86_64-2.txz.asc
-| | |-- xf86-video-r128-6.8.1-x86_64-1.txt
-| | |-- xf86-video-r128-6.8.1-x86_64-1.txz
-| | |-- xf86-video-r128-6.8.1-x86_64-1.txz.asc
-| | |-- xf86-video-radeonhd-1.2.5-x86_64-1.txt
-| | |-- xf86-video-radeonhd-1.2.5-x86_64-1.txz
-| | |-- xf86-video-radeonhd-1.2.5-x86_64-1.txz.asc
-| | |-- xf86-video-rendition-4.2.2-x86_64-1.txt
-| | |-- xf86-video-rendition-4.2.2-x86_64-1.txz
-| | |-- xf86-video-rendition-4.2.2-x86_64-1.txz.asc
-| | |-- xf86-video-s3-0.6.3-x86_64-1.txt
-| | |-- xf86-video-s3-0.6.3-x86_64-1.txz
-| | |-- xf86-video-s3-0.6.3-x86_64-1.txz.asc
-| | |-- xf86-video-s3virge-1.10.4-x86_64-1.txt
-| | |-- xf86-video-s3virge-1.10.4-x86_64-1.txz
-| | |-- xf86-video-s3virge-1.10.4-x86_64-1.txz.asc
-| | |-- xf86-video-savage-2.3.1-x86_64-1.txt
-| | |-- xf86-video-savage-2.3.1-x86_64-1.txz
-| | |-- xf86-video-savage-2.3.1-x86_64-1.txz.asc
-| | |-- xf86-video-siliconmotion-1.7.2-x86_64-1.txt
-| | |-- xf86-video-siliconmotion-1.7.2-x86_64-1.txz
-| | |-- xf86-video-siliconmotion-1.7.2-x86_64-1.txz.asc
-| | |-- xf86-video-sis-0.10.2-x86_64-1.txt
-| | |-- xf86-video-sis-0.10.2-x86_64-1.txz
-| | |-- xf86-video-sis-0.10.2-x86_64-1.txz.asc
-| | |-- xf86-video-sisusb-0.9.3-x86_64-1.txt
-| | |-- xf86-video-sisusb-0.9.3-x86_64-1.txz
-| | |-- xf86-video-sisusb-0.9.3-x86_64-1.txz.asc
-| | |-- xf86-video-tdfx-1.4.3-x86_64-1.txt
-| | |-- xf86-video-tdfx-1.4.3-x86_64-1.txz
-| | |-- xf86-video-tdfx-1.4.3-x86_64-1.txz.asc
-| | |-- xf86-video-tga-1.2.0-x86_64-1.txt
-| | |-- xf86-video-tga-1.2.0-x86_64-1.txz
-| | |-- xf86-video-tga-1.2.0-x86_64-1.txz.asc
-| | |-- xf86-video-trident-1.3.2-x86_64-1.txt
-| | |-- xf86-video-trident-1.3.2-x86_64-1.txz
-| | |-- xf86-video-trident-1.3.2-x86_64-1.txz.asc
-| | |-- xf86-video-tseng-1.2.2-x86_64-1.txt
-| | |-- xf86-video-tseng-1.2.2-x86_64-1.txz
-| | |-- xf86-video-tseng-1.2.2-x86_64-1.txz.asc
-| | |-- xf86-video-v4l-0.2.0-x86_64-2.txt
-| | |-- xf86-video-v4l-0.2.0-x86_64-2.txz
-| | |-- xf86-video-v4l-0.2.0-x86_64-2.txz.asc
-| | |-- xf86-video-vesa-2.2.1-x86_64-1.txt
-| | |-- xf86-video-vesa-2.2.1-x86_64-1.txz
-| | |-- xf86-video-vesa-2.2.1-x86_64-1.txz.asc
-| | |-- xf86-video-vmware-10.16.6-x86_64-1.txt
-| | |-- xf86-video-vmware-10.16.6-x86_64-1.txz
-| | |-- xf86-video-vmware-10.16.6-x86_64-1.txz.asc
-| | |-- xf86-video-voodoo-1.2.3-x86_64-1.txt
-| | |-- xf86-video-voodoo-1.2.3-x86_64-1.txz
-| | |-- xf86-video-voodoo-1.2.3-x86_64-1.txz.asc
-| | |-- xf86bigfontproto-1.1.2-noarch-2.txt
-| | |-- xf86bigfontproto-1.1.2-noarch-2.txz
-| | |-- xf86bigfontproto-1.1.2-noarch-2.txz.asc
+| | |-- xev-1.0.4-x86_64-1.txt
+| | |-- xev-1.0.4-x86_64-1.txz
+| | |-- xev-1.0.4-x86_64-1.txz.asc
+| | |-- xextproto-7.1.1-noarch-1.txt
+| | |-- xextproto-7.1.1-noarch-1.txz
+| | |-- xextproto-7.1.1-noarch-1.txz.asc
+| | |-- xeyes-1.1.0-x86_64-1.txt
+| | |-- xeyes-1.1.0-x86_64-1.txz
+| | |-- xeyes-1.1.0-x86_64-1.txz.asc
+| | |-- xf86-input-acecad-1.4.0-x86_64-1.txt
+| | |-- xf86-input-acecad-1.4.0-x86_64-1.txz
+| | |-- xf86-input-acecad-1.4.0-x86_64-1.txz.asc
+| | |-- xf86-input-aiptek-1.3.0-x86_64-1.txt
+| | |-- xf86-input-aiptek-1.3.0-x86_64-1.txz
+| | |-- xf86-input-aiptek-1.3.0-x86_64-1.txz.asc
+| | |-- xf86-input-evdev-2.3.3-x86_64-1.txt
+| | |-- xf86-input-evdev-2.3.3-x86_64-1.txz
+| | |-- xf86-input-evdev-2.3.3-x86_64-1.txz.asc
+| | |-- xf86-input-joystick-1.4.99.2-x86_64-1.txt
+| | |-- xf86-input-joystick-1.4.99.2-x86_64-1.txz
+| | |-- xf86-input-joystick-1.4.99.2-x86_64-1.txz.asc
+| | |-- xf86-input-keyboard-1.4.0-x86_64-1.txt
+| | |-- xf86-input-keyboard-1.4.0-x86_64-1.txz
+| | |-- xf86-input-keyboard-1.4.0-x86_64-1.txz.asc
+| | |-- xf86-input-mouse-1.5.0-x86_64-1.txt
+| | |-- xf86-input-mouse-1.5.0-x86_64-1.txz
+| | |-- xf86-input-mouse-1.5.0-x86_64-1.txz.asc
+| | |-- xf86-input-penmount-1.4.1-x86_64-1.txt
+| | |-- xf86-input-penmount-1.4.1-x86_64-1.txz
+| | |-- xf86-input-penmount-1.4.1-x86_64-1.txz.asc
+| | |-- xf86-input-synaptics-1.2.2-x86_64-1.txt
+| | |-- xf86-input-synaptics-1.2.2-x86_64-1.txz
+| | |-- xf86-input-synaptics-1.2.2-x86_64-1.txz.asc
+| | |-- xf86-input-vmmouse-12.6.9-x86_64-2.txt
+| | |-- xf86-input-vmmouse-12.6.9-x86_64-2.txz
+| | |-- xf86-input-vmmouse-12.6.9-x86_64-2.txz.asc
+| | |-- xf86-input-void-1.3.0-x86_64-1.txt
+| | |-- xf86-input-void-1.3.0-x86_64-1.txz
+| | |-- xf86-input-void-1.3.0-x86_64-1.txz.asc
+| | |-- xf86-input-wacom-0.10.5-x86_64-1.txt
+| | |-- xf86-input-wacom-0.10.5-x86_64-1.txz
+| | |-- xf86-input-wacom-0.10.5-x86_64-1.txz.asc
+| | |-- xf86-video-apm-1.2.2-x86_64-2.txt
+| | |-- xf86-video-apm-1.2.2-x86_64-2.txz
+| | |-- xf86-video-apm-1.2.2-x86_64-2.txz.asc
+| | |-- xf86-video-ark-0.7.2-x86_64-1.txt
+| | |-- xf86-video-ark-0.7.2-x86_64-1.txz
+| | |-- xf86-video-ark-0.7.2-x86_64-1.txz.asc
+| | |-- xf86-video-ast-0.89.9-x86_64-2.txt
+| | |-- xf86-video-ast-0.89.9-x86_64-2.txz
+| | |-- xf86-video-ast-0.89.9-x86_64-2.txz.asc
+| | |-- xf86-video-ati-6.13.0-x86_64-1.txt
+| | |-- xf86-video-ati-6.13.0-x86_64-1.txz
+| | |-- xf86-video-ati-6.13.0-x86_64-1.txz.asc
+| | |-- xf86-video-chips-1.2.2-x86_64-1.txt
+| | |-- xf86-video-chips-1.2.2-x86_64-1.txz
+| | |-- xf86-video-chips-1.2.2-x86_64-1.txz.asc
+| | |-- xf86-video-cirrus-1.3.2-x86_64-2.txt
+| | |-- xf86-video-cirrus-1.3.2-x86_64-2.txz
+| | |-- xf86-video-cirrus-1.3.2-x86_64-2.txz.asc
+| | |-- xf86-video-dummy-0.3.3-x86_64-1.txt
+| | |-- xf86-video-dummy-0.3.3-x86_64-1.txz
+| | |-- xf86-video-dummy-0.3.3-x86_64-1.txz.asc
+| | |-- xf86-video-glint-1.2.4-x86_64-2.txt
+| | |-- xf86-video-glint-1.2.4-x86_64-2.txz
+| | |-- xf86-video-glint-1.2.4-x86_64-2.txz.asc
+| | |-- xf86-video-i128-1.3.3-x86_64-2.txt
+| | |-- xf86-video-i128-1.3.3-x86_64-2.txz
+| | |-- xf86-video-i128-1.3.3-x86_64-2.txz.asc
+| | |-- xf86-video-i740-1.3.2-x86_64-2.txt
+| | |-- xf86-video-i740-1.3.2-x86_64-2.txz
+| | |-- xf86-video-i740-1.3.2-x86_64-2.txz.asc
+| | |-- xf86-video-intel-2.11.0-x86_64-1.txt
+| | |-- xf86-video-intel-2.11.0-x86_64-1.txz
+| | |-- xf86-video-intel-2.11.0-x86_64-1.txz.asc
+| | |-- xf86-video-mach64-6.8.2-x86_64-2.txt
+| | |-- xf86-video-mach64-6.8.2-x86_64-2.txz
+| | |-- xf86-video-mach64-6.8.2-x86_64-2.txz.asc
+| | |-- xf86-video-mga-1.4.11-x86_64-2.txt
+| | |-- xf86-video-mga-1.4.11-x86_64-2.txz
+| | |-- xf86-video-mga-1.4.11-x86_64-2.txz.asc
+| | |-- xf86-video-neomagic-1.2.4-x86_64-2.txt
+| | |-- xf86-video-neomagic-1.2.4-x86_64-2.txz
+| | |-- xf86-video-neomagic-1.2.4-x86_64-2.txz.asc
+| | |-- xf86-video-nouveau-blacklist-noarch-1.txt
+| | |-- xf86-video-nouveau-blacklist-noarch-1.txz
+| | |-- xf86-video-nouveau-blacklist-noarch-1.txz.asc
+| | |-- xf86-video-nv-2.1.17-x86_64-1.txt
+| | |-- xf86-video-nv-2.1.17-x86_64-1.txz
+| | |-- xf86-video-nv-2.1.17-x86_64-1.txz.asc
+| | |-- xf86-video-openchrome-0.2.904-x86_64-1.txt
+| | |-- xf86-video-openchrome-0.2.904-x86_64-1.txz
+| | |-- xf86-video-openchrome-0.2.904-x86_64-1.txz.asc
+| | |-- xf86-video-r128-6.8.1-x86_64-2.txt
+| | |-- xf86-video-r128-6.8.1-x86_64-2.txz
+| | |-- xf86-video-r128-6.8.1-x86_64-2.txz.asc
+| | |-- xf86-video-radeonhd-1.3.0-x86_64-1.txt
+| | |-- xf86-video-radeonhd-1.3.0-x86_64-1.txz
+| | |-- xf86-video-radeonhd-1.3.0-x86_64-1.txz.asc
+| | |-- xf86-video-rendition-4.2.3-x86_64-1.txt
+| | |-- xf86-video-rendition-4.2.3-x86_64-1.txz
+| | |-- xf86-video-rendition-4.2.3-x86_64-1.txz.asc
+| | |-- xf86-video-s3-0.6.3-x86_64-2.txt
+| | |-- xf86-video-s3-0.6.3-x86_64-2.txz
+| | |-- xf86-video-s3-0.6.3-x86_64-2.txz.asc
+| | |-- xf86-video-s3virge-1.10.4-x86_64-2.txt
+| | |-- xf86-video-s3virge-1.10.4-x86_64-2.txz
+| | |-- xf86-video-s3virge-1.10.4-x86_64-2.txz.asc
+| | |-- xf86-video-savage-2.3.1-x86_64-2.txt
+| | |-- xf86-video-savage-2.3.1-x86_64-2.txz
+| | |-- xf86-video-savage-2.3.1-x86_64-2.txz.asc
+| | |-- xf86-video-siliconmotion-1.7.4-x86_64-1.txt
+| | |-- xf86-video-siliconmotion-1.7.4-x86_64-1.txz
+| | |-- xf86-video-siliconmotion-1.7.4-x86_64-1.txz.asc
+| | |-- xf86-video-sis-0.10.2-x86_64-2.txt
+| | |-- xf86-video-sis-0.10.2-x86_64-2.txz
+| | |-- xf86-video-sis-0.10.2-x86_64-2.txz.asc
+| | |-- xf86-video-sisusb-0.9.3-x86_64-2.txt
+| | |-- xf86-video-sisusb-0.9.3-x86_64-2.txz
+| | |-- xf86-video-sisusb-0.9.3-x86_64-2.txz.asc
+| | |-- xf86-video-tdfx-1.4.3-x86_64-2.txt
+| | |-- xf86-video-tdfx-1.4.3-x86_64-2.txz
+| | |-- xf86-video-tdfx-1.4.3-x86_64-2.txz.asc
+| | |-- xf86-video-tga-1.2.1-x86_64-1.txt
+| | |-- xf86-video-tga-1.2.1-x86_64-1.txz
+| | |-- xf86-video-tga-1.2.1-x86_64-1.txz.asc
+| | |-- xf86-video-trident-1.3.3-x86_64-1.txt
+| | |-- xf86-video-trident-1.3.3-x86_64-1.txz
+| | |-- xf86-video-trident-1.3.3-x86_64-1.txz.asc
+| | |-- xf86-video-tseng-1.2.3-x86_64-1.txt
+| | |-- xf86-video-tseng-1.2.3-x86_64-1.txz
+| | |-- xf86-video-tseng-1.2.3-x86_64-1.txz.asc
+| | |-- xf86-video-v4l-0.2.0-x86_64-3.txt
+| | |-- xf86-video-v4l-0.2.0-x86_64-3.txz
+| | |-- xf86-video-v4l-0.2.0-x86_64-3.txz.asc
+| | |-- xf86-video-vesa-2.3.0-x86_64-2.txt
+| | |-- xf86-video-vesa-2.3.0-x86_64-2.txz
+| | |-- xf86-video-vesa-2.3.0-x86_64-2.txz.asc
+| | |-- xf86-video-vmware-10.16.9-x86_64-2.txt
+| | |-- xf86-video-vmware-10.16.9-x86_64-2.txz
+| | |-- xf86-video-vmware-10.16.9-x86_64-2.txz.asc
+| | |-- xf86-video-voodoo-1.2.3-x86_64-2.txt
+| | |-- xf86-video-voodoo-1.2.3-x86_64-2.txz
+| | |-- xf86-video-voodoo-1.2.3-x86_64-2.txz.asc
+| | |-- xf86-video-xgi-1.5.1-x86_64-1.txt
+| | |-- xf86-video-xgi-1.5.1-x86_64-1.txz
+| | |-- xf86-video-xgi-1.5.1-x86_64-1.txz.asc
+| | |-- xf86bigfontproto-1.2.0-noarch-1.txt
+| | |-- xf86bigfontproto-1.2.0-noarch-1.txz
+| | |-- xf86bigfontproto-1.2.0-noarch-1.txz.asc
| | |-- xf86dga-1.0.2-x86_64-2.txt
| | |-- xf86dga-1.0.2-x86_64-2.txz
| | |-- xf86dga-1.0.2-x86_64-2.txz.asc
-| | |-- xf86dgaproto-2.0.3-noarch-2.txt
-| | |-- xf86dgaproto-2.0.3-noarch-2.txz
-| | |-- xf86dgaproto-2.0.3-noarch-2.txz.asc
-| | |-- xf86driproto-2.0.4-noarch-2.txt
-| | |-- xf86driproto-2.0.4-noarch-2.txz
-| | |-- xf86driproto-2.0.4-noarch-2.txz.asc
-| | |-- xf86miscproto-0.9.2-noarch-2.txt
-| | |-- xf86miscproto-0.9.2-noarch-2.txz
-| | |-- xf86miscproto-0.9.2-noarch-2.txz.asc
+| | |-- xf86dgaproto-2.1-noarch-1.txt
+| | |-- xf86dgaproto-2.1-noarch-1.txz
+| | |-- xf86dgaproto-2.1-noarch-1.txz.asc
+| | |-- xf86driproto-2.1.0-noarch-1.txt
+| | |-- xf86driproto-2.1.0-noarch-1.txz
+| | |-- xf86driproto-2.1.0-noarch-1.txz.asc
+| | |-- xf86miscproto-0.9.3-noarch-1.txt
+| | |-- xf86miscproto-0.9.3-noarch-1.txz
+| | |-- xf86miscproto-0.9.3-noarch-1.txz.asc
| | |-- xf86rushproto-1.1.2-noarch-2.txt
| | |-- xf86rushproto-1.1.2-noarch-2.txz
| | |-- xf86rushproto-1.1.2-noarch-2.txz.asc
-| | |-- xf86vidmodeproto-2.2.2-noarch-2.txt
-| | |-- xf86vidmodeproto-2.2.2-noarch-2.txz
-| | |-- xf86vidmodeproto-2.2.2-noarch-2.txz.asc
+| | |-- xf86vidmodeproto-2.3-noarch-1.txt
+| | |-- xf86vidmodeproto-2.3-noarch-1.txz
+| | |-- xf86vidmodeproto-2.3-noarch-1.txz.asc
| | |-- xfd-1.0.1-x86_64-2.txt
| | |-- xfd-1.0.1-x86_64-2.txz
| | |-- xfd-1.0.1-x86_64-2.txz.asc
@@ -3364,251 +3446,254 @@ see additional documentation files. | | |-- xfwp-1.0.1-x86_64-2.txt
| | |-- xfwp-1.0.1-x86_64-2.txz
| | |-- xfwp-1.0.1-x86_64-2.txz.asc
-| | |-- xgamma-1.0.2-x86_64-2.txt
-| | |-- xgamma-1.0.2-x86_64-2.txz
-| | |-- xgamma-1.0.2-x86_64-2.txz.asc
-| | |-- xgc-1.0.1-x86_64-2.txt
-| | |-- xgc-1.0.1-x86_64-2.txz
-| | |-- xgc-1.0.1-x86_64-2.txz.asc
-| | |-- xhost-1.0.2-x86_64-2.txt
-| | |-- xhost-1.0.2-x86_64-2.txz
-| | |-- xhost-1.0.2-x86_64-2.txz.asc
-| | |-- xineramaproto-1.1.2-noarch-2.txt
-| | |-- xineramaproto-1.1.2-noarch-2.txz
-| | |-- xineramaproto-1.1.2-noarch-2.txz.asc
-| | |-- xinit-1.1.1-x86_64-1.txt
-| | |-- xinit-1.1.1-x86_64-1.txz
-| | |-- xinit-1.1.1-x86_64-1.txz.asc
-| | |-- xinput-1.4.2-x86_64-1.txt
-| | |-- xinput-1.4.2-x86_64-1.txz
-| | |-- xinput-1.4.2-x86_64-1.txz.asc
-| | |-- xkbcomp-1.1.0-x86_64-1.txt
-| | |-- xkbcomp-1.1.0-x86_64-1.txz
-| | |-- xkbcomp-1.1.0-x86_64-1.txz.asc
-| | |-- xkbevd-1.0.2-x86_64-2.txt
-| | |-- xkbevd-1.0.2-x86_64-2.txz
-| | |-- xkbevd-1.0.2-x86_64-2.txz.asc
-| | |-- xkbprint-1.0.1-x86_64-2.txt
-| | |-- xkbprint-1.0.1-x86_64-2.txz
-| | |-- xkbprint-1.0.1-x86_64-2.txz.asc
-| | |-- xkbutils-1.0.1-x86_64-2.txt
-| | |-- xkbutils-1.0.1-x86_64-2.txz
-| | |-- xkbutils-1.0.1-x86_64-2.txz.asc
-| | |-- xkeyboard-config-1.6-noarch-1.txt
-| | |-- xkeyboard-config-1.6-noarch-1.txz
-| | |-- xkeyboard-config-1.6-noarch-1.txz.asc
-| | |-- xkill-1.0.1-x86_64-2.txt
-| | |-- xkill-1.0.1-x86_64-2.txz
-| | |-- xkill-1.0.1-x86_64-2.txz.asc
+| | |-- xgamma-1.0.3-x86_64-1.txt
+| | |-- xgamma-1.0.3-x86_64-1.txz
+| | |-- xgamma-1.0.3-x86_64-1.txz.asc
+| | |-- xgc-1.0.2-x86_64-2.txt
+| | |-- xgc-1.0.2-x86_64-2.txz
+| | |-- xgc-1.0.2-x86_64-2.txz.asc
+| | |-- xhost-1.0.3-x86_64-1.txt
+| | |-- xhost-1.0.3-x86_64-1.txz
+| | |-- xhost-1.0.3-x86_64-1.txz.asc
+| | |-- xineramaproto-1.2-noarch-1.txt
+| | |-- xineramaproto-1.2-noarch-1.txz
+| | |-- xineramaproto-1.2-noarch-1.txz.asc
+| | |-- xinit-1.2.1-x86_64-1.txt
+| | |-- xinit-1.2.1-x86_64-1.txz
+| | |-- xinit-1.2.1-x86_64-1.txz.asc
+| | |-- xinput-1.5.1-x86_64-1.txt
+| | |-- xinput-1.5.1-x86_64-1.txz
+| | |-- xinput-1.5.1-x86_64-1.txz.asc
+| | |-- xkbcomp-1.1.1-x86_64-1.txt
+| | |-- xkbcomp-1.1.1-x86_64-1.txz
+| | |-- xkbcomp-1.1.1-x86_64-1.txz.asc
+| | |-- xkbevd-1.1.0-x86_64-1.txt
+| | |-- xkbevd-1.1.0-x86_64-1.txz
+| | |-- xkbevd-1.1.0-x86_64-1.txz.asc
+| | |-- xkbprint-1.0.2-x86_64-1.txt
+| | |-- xkbprint-1.0.2-x86_64-1.txz
+| | |-- xkbprint-1.0.2-x86_64-1.txz.asc
+| | |-- xkbutils-1.0.2-x86_64-1.txt
+| | |-- xkbutils-1.0.2-x86_64-1.txz
+| | |-- xkbutils-1.0.2-x86_64-1.txz.asc
+| | |-- xkeyboard-config-1.8-noarch-1.txt
+| | |-- xkeyboard-config-1.8-noarch-1.txz
+| | |-- xkeyboard-config-1.8-noarch-1.txz.asc
+| | |-- xkill-1.0.2-x86_64-1.txt
+| | |-- xkill-1.0.2-x86_64-1.txz
+| | |-- xkill-1.0.2-x86_64-1.txz.asc
| | |-- xload-1.0.2-x86_64-2.txt
| | |-- xload-1.0.2-x86_64-2.txz
| | |-- xload-1.0.2-x86_64-2.txz.asc
-| | |-- xlogo-1.0.1-x86_64-2.txt
-| | |-- xlogo-1.0.1-x86_64-2.txz
-| | |-- xlogo-1.0.1-x86_64-2.txz.asc
-| | |-- xlsatoms-1.0.1-x86_64-2.txt
-| | |-- xlsatoms-1.0.1-x86_64-2.txz
-| | |-- xlsatoms-1.0.1-x86_64-2.txz.asc
-| | |-- xlsclients-1.0.1-x86_64-2.txt
-| | |-- xlsclients-1.0.1-x86_64-2.txz
-| | |-- xlsclients-1.0.1-x86_64-2.txz.asc
+| | |-- xlogo-1.0.2-x86_64-1.txt
+| | |-- xlogo-1.0.2-x86_64-1.txz
+| | |-- xlogo-1.0.2-x86_64-1.txz.asc
+| | |-- xlsatoms-1.0.2-x86_64-1.txt
+| | |-- xlsatoms-1.0.2-x86_64-1.txz
+| | |-- xlsatoms-1.0.2-x86_64-1.txz.asc
+| | |-- xlsclients-1.0.2-x86_64-1.txt
+| | |-- xlsclients-1.0.2-x86_64-1.txz
+| | |-- xlsclients-1.0.2-x86_64-1.txz.asc
| | |-- xlsfonts-1.0.2-x86_64-2.txt
| | |-- xlsfonts-1.0.2-x86_64-2.txz
| | |-- xlsfonts-1.0.2-x86_64-2.txz.asc
-| | |-- xmag-1.0.2-x86_64-2.txt
-| | |-- xmag-1.0.2-x86_64-2.txz
-| | |-- xmag-1.0.2-x86_64-2.txz.asc
-| | |-- xman-1.0.3-x86_64-2.txt
-| | |-- xman-1.0.3-x86_64-2.txz
-| | |-- xman-1.0.3-x86_64-2.txz.asc
-| | |-- xmessage-1.0.2-x86_64-2.txt
-| | |-- xmessage-1.0.2-x86_64-2.txz
-| | |-- xmessage-1.0.2-x86_64-2.txz.asc
+| | |-- xmag-1.0.3-x86_64-1.txt
+| | |-- xmag-1.0.3-x86_64-1.txz
+| | |-- xmag-1.0.3-x86_64-1.txz.asc
+| | |-- xman-1.1.0-x86_64-1.txt
+| | |-- xman-1.1.0-x86_64-1.txz
+| | |-- xman-1.1.0-x86_64-1.txz.asc
+| | |-- xmessage-1.0.3-x86_64-1.txt
+| | |-- xmessage-1.0.3-x86_64-1.txz
+| | |-- xmessage-1.0.3-x86_64-1.txz.asc
| | |-- xmh-1.0.1-x86_64-2.txt
| | |-- xmh-1.0.1-x86_64-2.txz
| | |-- xmh-1.0.1-x86_64-2.txz.asc
-| | |-- xmodmap-1.0.3-x86_64-2.txt
-| | |-- xmodmap-1.0.3-x86_64-2.txz
-| | |-- xmodmap-1.0.3-x86_64-2.txz.asc
+| | |-- xmodmap-1.0.4-x86_64-1.txt
+| | |-- xmodmap-1.0.4-x86_64-1.txz
+| | |-- xmodmap-1.0.4-x86_64-1.txz.asc
| | |-- xmore-1.0.1-x86_64-2.txt
| | |-- xmore-1.0.1-x86_64-2.txz
| | |-- xmore-1.0.1-x86_64-2.txz.asc
-| | |-- xorg-cf-files-1.0.2-noarch-3.txt
-| | |-- xorg-cf-files-1.0.2-noarch-3.txz
-| | |-- xorg-cf-files-1.0.2-noarch-3.txz.asc
-| | |-- xorg-docs-1.4-noarch-2.txt
-| | |-- xorg-docs-1.4-noarch-2.txz
-| | |-- xorg-docs-1.4-noarch-2.txz.asc
-| | |-- xorg-server-1.6.3-x86_64-1.txt
-| | |-- xorg-server-1.6.3-x86_64-1.txz
-| | |-- xorg-server-1.6.3-x86_64-1.txz.asc
-| | |-- xorg-server-xephyr-1.6.3-x86_64-1.txt
-| | |-- xorg-server-xephyr-1.6.3-x86_64-1.txz
-| | |-- xorg-server-xephyr-1.6.3-x86_64-1.txz.asc
-| | |-- xorg-server-xnest-1.6.3-x86_64-1.txt
-| | |-- xorg-server-xnest-1.6.3-x86_64-1.txz
-| | |-- xorg-server-xnest-1.6.3-x86_64-1.txz.asc
-| | |-- xorg-server-xvfb-1.6.3-x86_64-1.txt
-| | |-- xorg-server-xvfb-1.6.3-x86_64-1.txz
-| | |-- xorg-server-xvfb-1.6.3-x86_64-1.txz.asc
-| | |-- xorg-sgml-doctools-1.2-noarch-2.txt
-| | |-- xorg-sgml-doctools-1.2-noarch-2.txz
-| | |-- xorg-sgml-doctools-1.2-noarch-2.txz.asc
+| | |-- xorg-cf-files-1.0.3-noarch-1.txt
+| | |-- xorg-cf-files-1.0.3-noarch-1.txz
+| | |-- xorg-cf-files-1.0.3-noarch-1.txz.asc
+| | |-- xorg-docs-1.5-noarch-1.txt
+| | |-- xorg-docs-1.5-noarch-1.txz
+| | |-- xorg-docs-1.5-noarch-1.txz.asc
+| | |-- xorg-server-1.7.7-x86_64-1.txt
+| | |-- xorg-server-1.7.7-x86_64-1.txz
+| | |-- xorg-server-1.7.7-x86_64-1.txz.asc
+| | |-- xorg-server-xephyr-1.7.7-x86_64-1.txt
+| | |-- xorg-server-xephyr-1.7.7-x86_64-1.txz
+| | |-- xorg-server-xephyr-1.7.7-x86_64-1.txz.asc
+| | |-- xorg-server-xnest-1.7.7-x86_64-1.txt
+| | |-- xorg-server-xnest-1.7.7-x86_64-1.txz
+| | |-- xorg-server-xnest-1.7.7-x86_64-1.txz.asc
+| | |-- xorg-server-xvfb-1.7.7-x86_64-1.txt
+| | |-- xorg-server-xvfb-1.7.7-x86_64-1.txz
+| | |-- xorg-server-xvfb-1.7.7-x86_64-1.txz.asc
+| | |-- xorg-sgml-doctools-1.4-noarch-1.txt
+| | |-- xorg-sgml-doctools-1.4-noarch-1.txz
+| | |-- xorg-sgml-doctools-1.4-noarch-1.txz.asc
| | |-- xplsprinters-1.0.1-x86_64-2.txt
| | |-- xplsprinters-1.0.1-x86_64-2.txz
| | |-- xplsprinters-1.0.1-x86_64-2.txz.asc
-| | |-- xpr-1.0.2-x86_64-2.txt
-| | |-- xpr-1.0.2-x86_64-2.txz
-| | |-- xpr-1.0.2-x86_64-2.txz.asc
+| | |-- xpr-1.0.3-x86_64-1.txt
+| | |-- xpr-1.0.3-x86_64-1.txz
+| | |-- xpr-1.0.3-x86_64-1.txz.asc
| | |-- xprehashprinterlist-1.0.1-x86_64-2.txt
| | |-- xprehashprinterlist-1.0.1-x86_64-2.txz
| | |-- xprehashprinterlist-1.0.1-x86_64-2.txz.asc
-| | |-- xprop-1.0.4-x86_64-2.txt
-| | |-- xprop-1.0.4-x86_64-2.txz
-| | |-- xprop-1.0.4-x86_64-2.txz.asc
-| | |-- xproto-7.0.15-noarch-1.txt
-| | |-- xproto-7.0.15-noarch-1.txz
-| | |-- xproto-7.0.15-noarch-1.txz.asc
-| | |-- xproxymanagementprotocol-1.0.2-noarch-2.txt
-| | |-- xproxymanagementprotocol-1.0.2-noarch-2.txz
-| | |-- xproxymanagementprotocol-1.0.2-noarch-2.txz.asc
-| | |-- xpyb-1.1-x86_64-1.txt
-| | |-- xpyb-1.1-x86_64-1.txz
-| | |-- xpyb-1.1-x86_64-1.txz.asc
-| | |-- xrandr-1.3.0-x86_64-1.txt
-| | |-- xrandr-1.3.0-x86_64-1.txz
-| | |-- xrandr-1.3.0-x86_64-1.txz.asc
-| | |-- xrdb-1.0.5-x86_64-2.txt
-| | |-- xrdb-1.0.5-x86_64-2.txz
-| | |-- xrdb-1.0.5-x86_64-2.txz.asc
-| | |-- xrefresh-1.0.2-x86_64-2.txt
-| | |-- xrefresh-1.0.2-x86_64-2.txz
-| | |-- xrefresh-1.0.2-x86_64-2.txz.asc
-| | |-- xscope-1.1-x86_64-1.txt
-| | |-- xscope-1.1-x86_64-1.txz
-| | |-- xscope-1.1-x86_64-1.txz.asc
-| | |-- xset-1.0.4-x86_64-2.txt
-| | |-- xset-1.0.4-x86_64-2.txz
-| | |-- xset-1.0.4-x86_64-2.txz.asc
+| | |-- xprop-1.1.0-x86_64-1.txt
+| | |-- xprop-1.1.0-x86_64-1.txz
+| | |-- xprop-1.1.0-x86_64-1.txz.asc
+| | |-- xproto-7.0.16-noarch-1.txt
+| | |-- xproto-7.0.16-noarch-1.txz
+| | |-- xproto-7.0.16-noarch-1.txz.asc
+| | |-- xproxymanagementprotocol-1.0.3-noarch-1.txt
+| | |-- xproxymanagementprotocol-1.0.3-noarch-1.txz
+| | |-- xproxymanagementprotocol-1.0.3-noarch-1.txz.asc
+| | |-- xpyb-1.2-x86_64-1.txt
+| | |-- xpyb-1.2-x86_64-1.txz
+| | |-- xpyb-1.2-x86_64-1.txz.asc
+| | |-- xrandr-1.3.2-x86_64-1.txt
+| | |-- xrandr-1.3.2-x86_64-1.txz
+| | |-- xrandr-1.3.2-x86_64-1.txz.asc
+| | |-- xrdb-1.0.6-x86_64-1.txt
+| | |-- xrdb-1.0.6-x86_64-1.txz
+| | |-- xrdb-1.0.6-x86_64-1.txz.asc
+| | |-- xrefresh-1.0.3-x86_64-1.txt
+| | |-- xrefresh-1.0.3-x86_64-1.txz
+| | |-- xrefresh-1.0.3-x86_64-1.txz.asc
+| | |-- xscope-1.2-x86_64-1.txt
+| | |-- xscope-1.2-x86_64-1.txz
+| | |-- xscope-1.2-x86_64-1.txz.asc
+| | |-- xset-1.1.0-x86_64-1.txt
+| | |-- xset-1.1.0-x86_64-1.txz
+| | |-- xset-1.1.0-x86_64-1.txz.asc
| | |-- xsetmode-1.0.0-x86_64-2.txt
| | |-- xsetmode-1.0.0-x86_64-2.txz
| | |-- xsetmode-1.0.0-x86_64-2.txz.asc
| | |-- xsetpointer-1.0.1-x86_64-2.txt
| | |-- xsetpointer-1.0.1-x86_64-2.txz
| | |-- xsetpointer-1.0.1-x86_64-2.txz.asc
-| | |-- xsetroot-1.0.2-x86_64-2.txt
-| | |-- xsetroot-1.0.2-x86_64-2.txz
-| | |-- xsetroot-1.0.2-x86_64-2.txz.asc
+| | |-- xsetroot-1.0.3-x86_64-1.txt
+| | |-- xsetroot-1.0.3-x86_64-1.txz
+| | |-- xsetroot-1.0.3-x86_64-1.txz.asc
| | |-- xsm-1.0.1-x86_64-2.txt
| | |-- xsm-1.0.1-x86_64-2.txz
| | |-- xsm-1.0.1-x86_64-2.txz.asc
| | |-- xstdcmap-1.0.1-x86_64-2.txt
| | |-- xstdcmap-1.0.1-x86_64-2.txz
| | |-- xstdcmap-1.0.1-x86_64-2.txz.asc
-| | |-- xterm-243-x86_64-2.txt
-| | |-- xterm-243-x86_64-2.txz
-| | |-- xterm-243-x86_64-2.txz.asc
-| | |-- xtrans-1.2.4-noarch-1.txt
-| | |-- xtrans-1.2.4-noarch-1.txz
-| | |-- xtrans-1.2.4-noarch-1.txz.asc
+| | |-- xterm-258-x86_64-1.txt
+| | |-- xterm-258-x86_64-1.txz
+| | |-- xterm-258-x86_64-1.txz.asc
+| | |-- xtrans-1.2.5-noarch-1.txt
+| | |-- xtrans-1.2.5-noarch-1.txz
+| | |-- xtrans-1.2.5-noarch-1.txz.asc
| | |-- xtrap-1.0.2-x86_64-2.txt
| | |-- xtrap-1.0.2-x86_64-2.txz
| | |-- xtrap-1.0.2-x86_64-2.txz.asc
-| | |-- xvidtune-1.0.1-x86_64-2.txt
-| | |-- xvidtune-1.0.1-x86_64-2.txz
-| | |-- xvidtune-1.0.1-x86_64-2.txz.asc
-| | |-- xvinfo-1.0.2-x86_64-2.txt
-| | |-- xvinfo-1.0.2-x86_64-2.txz
-| | |-- xvinfo-1.0.2-x86_64-2.txz.asc
-| | |-- xwd-1.0.2-x86_64-1.txt
-| | |-- xwd-1.0.2-x86_64-1.txz
-| | |-- xwd-1.0.2-x86_64-1.txz.asc
-| | |-- xwininfo-1.0.4-x86_64-1.txt
-| | |-- xwininfo-1.0.4-x86_64-1.txz
-| | |-- xwininfo-1.0.4-x86_64-1.txz.asc
-| | |-- xwud-1.0.1-x86_64-2.txt
-| | |-- xwud-1.0.1-x86_64-2.txz
-| | `-- xwud-1.0.1-x86_64-2.txz.asc
+| | |-- xvidtune-1.0.2-x86_64-1.txt
+| | |-- xvidtune-1.0.2-x86_64-1.txz
+| | |-- xvidtune-1.0.2-x86_64-1.txz.asc
+| | |-- xvinfo-1.1.0-x86_64-1.txt
+| | |-- xvinfo-1.1.0-x86_64-1.txz
+| | |-- xvinfo-1.1.0-x86_64-1.txz.asc
+| | |-- xwd-1.0.3-x86_64-1.txt
+| | |-- xwd-1.0.3-x86_64-1.txz
+| | |-- xwd-1.0.3-x86_64-1.txz.asc
+| | |-- xwininfo-1.0.5-x86_64-1.txt
+| | |-- xwininfo-1.0.5-x86_64-1.txz
+| | |-- xwininfo-1.0.5-x86_64-1.txz.asc
+| | |-- xwud-1.0.2-x86_64-1.txt
+| | |-- xwud-1.0.2-x86_64-1.txz
+| | `-- xwud-1.0.2-x86_64-1.txz.asc
| |-- xap
-| | |-- MPlayer-r29390-x86_64-1.txt
-| | |-- MPlayer-r29390-x86_64-1.txz
-| | |-- MPlayer-r29390-x86_64-1.txz.asc
-| | |-- audacious-1.5.1-x86_64-3.txt
-| | |-- audacious-1.5.1-x86_64-3.txz
-| | |-- audacious-1.5.1-x86_64-3.txz.asc
-| | |-- audacious-plugins-1.5.1-x86_64-4.txt
-| | |-- audacious-plugins-1.5.1-x86_64-4.txz
-| | |-- audacious-plugins-1.5.1-x86_64-4.txz.asc
-| | |-- blackbox-0.65.0-x86_64-4.txt
-| | |-- blackbox-0.65.0-x86_64-4.txz
-| | |-- blackbox-0.65.0-x86_64-4.txz.asc
-| | |-- electricsheep-20090306-x86_64-2.txt
-| | |-- electricsheep-20090306-x86_64-2.txz
-| | |-- electricsheep-20090306-x86_64-2.txz.asc
-| | |-- fluxbox-1.1.1-x86_64-1.txt
-| | |-- fluxbox-1.1.1-x86_64-1.txz
-| | |-- fluxbox-1.1.1-x86_64-1.txz.asc
+| | |-- MPlayer-20100218-x86_64-1.txt
+| | |-- MPlayer-20100218-x86_64-1.txz
+| | |-- MPlayer-20100218-x86_64-1.txz.asc
+| | |-- audacious-2.3-x86_64-1.txt
+| | |-- audacious-2.3-x86_64-1.txz
+| | |-- audacious-2.3-x86_64-1.txz.asc
+| | |-- audacious-plugins-2.3-x86_64-1.txt
+| | |-- audacious-plugins-2.3-x86_64-1.txz
+| | |-- audacious-plugins-2.3-x86_64-1.txz.asc
+| | |-- blackbox-0.70.1-x86_64-3.txt
+| | |-- blackbox-0.70.1-x86_64-3.txz
+| | |-- blackbox-0.70.1-x86_64-3.txz.asc
+| | |-- blueman-1.21-x86_64-1.txt
+| | |-- blueman-1.21-x86_64-1.txz
+| | |-- blueman-1.21-x86_64-1.txz.asc
+| | |-- electricsheep-20090306-x86_64-3.txt
+| | |-- electricsheep-20090306-x86_64-3.txz
+| | |-- electricsheep-20090306-x86_64-3.txz.asc
+| | |-- fluxbox-1.1.1-x86_64-2.txt
+| | |-- fluxbox-1.1.1-x86_64-2.txz
+| | |-- fluxbox-1.1.1-x86_64-2.txz.asc
| | |-- fvwm-2.4.20-x86_64-1.txt
| | |-- fvwm-2.4.20-x86_64-1.txz
| | |-- fvwm-2.4.20-x86_64-1.txz.asc
+| | |-- geeqie-1.0-x86_64-1.txt
+| | |-- geeqie-1.0-x86_64-1.txz
+| | |-- geeqie-1.0-x86_64-1.txz.asc
| | |-- gftp-2.0.19-x86_64-2.txt
| | |-- gftp-2.0.19-x86_64-2.txz
| | |-- gftp-2.0.19-x86_64-2.txz.asc
-| | |-- gimp-2.6.6-x86_64-2.txt
-| | |-- gimp-2.6.6-x86_64-2.txz
-| | |-- gimp-2.6.6-x86_64-2.txz.asc
-| | |-- gkrellm-2.3.2-x86_64-1.txt
-| | |-- gkrellm-2.3.2-x86_64-1.txz
-| | |-- gkrellm-2.3.2-x86_64-1.txz.asc
-| | |-- gnuchess-5.07-x86_64-4.txt
-| | |-- gnuchess-5.07-x86_64-4.txz
-| | |-- gnuchess-5.07-x86_64-4.txz.asc
-| | |-- gnuplot-4.2.5-x86_64-1.txt
-| | |-- gnuplot-4.2.5-x86_64-1.txz
-| | |-- gnuplot-4.2.5-x86_64-1.txz.asc
-| | |-- gqview-2.1.5-x86_64-2.txt
-| | |-- gqview-2.1.5-x86_64-2.txz
-| | |-- gqview-2.1.5-x86_64-2.txz.asc
-| | |-- gucharmap-2.26.2-x86_64-1.txt
-| | |-- gucharmap-2.26.2-x86_64-1.txz
-| | |-- gucharmap-2.26.2-x86_64-1.txz.asc
-| | |-- gv-3.6.7-x86_64-1.txt
-| | |-- gv-3.6.7-x86_64-1.txz
-| | |-- gv-3.6.7-x86_64-1.txz.asc
+| | |-- gimp-2.6.8-x86_64-2.txt
+| | |-- gimp-2.6.8-x86_64-2.txz
+| | |-- gimp-2.6.8-x86_64-2.txz.asc
+| | |-- gkrellm-2.3.4-x86_64-1.txt
+| | |-- gkrellm-2.3.4-x86_64-1.txz
+| | |-- gkrellm-2.3.4-x86_64-1.txz.asc
+| | |-- gnuchess-5.07-x86_64-5.txt
+| | |-- gnuchess-5.07-x86_64-5.txz
+| | |-- gnuchess-5.07-x86_64-5.txz.asc
+| | |-- gnuplot-4.2.6-x86_64-1.txt
+| | |-- gnuplot-4.2.6-x86_64-1.txz
+| | |-- gnuplot-4.2.6-x86_64-1.txz.asc
+| | |-- gucharmap-2.28.2-x86_64-1.txt
+| | |-- gucharmap-2.28.2-x86_64-1.txz
+| | |-- gucharmap-2.28.2-x86_64-1.txz.asc
+| | |-- gv-3.6.9-x86_64-1.txt
+| | |-- gv-3.6.9-x86_64-1.txz
+| | |-- gv-3.6.9-x86_64-1.txz.asc
| | |-- gxine-0.5.903-x86_64-2.txt
| | |-- gxine-0.5.903-x86_64-2.txz
| | |-- gxine-0.5.903-x86_64-2.txz.asc
-| | |-- imagemagick-6.5.3_3-x86_64-1.txt
-| | |-- imagemagick-6.5.3_3-x86_64-1.txz
-| | |-- imagemagick-6.5.3_3-x86_64-1.txz.asc
+| | |-- imagemagick-6.5.9_6-x86_64-1.txt
+| | |-- imagemagick-6.5.9_6-x86_64-1.txz
+| | |-- imagemagick-6.5.9_6-x86_64-1.txz.asc
| | |-- install-packages
| | |-- install.end
| | |-- maketag
| | |-- maketag.ez
-| | |-- mozilla-firefox-3.5.2-x86_64-1.txt
-| | |-- mozilla-firefox-3.5.2-x86_64-1.txz
-| | |-- mozilla-firefox-3.5.2-x86_64-1.txz.asc
-| | |-- mozilla-thunderbird-2.0.0.23-x86_64-1.txt
-| | |-- mozilla-thunderbird-2.0.0.23-x86_64-1.txz
-| | |-- mozilla-thunderbird-2.0.0.23-x86_64-1.txz.asc
-| | |-- pan-0.133-x86_64-1.txt
-| | |-- pan-0.133-x86_64-1.txz
-| | |-- pan-0.133-x86_64-1.txz.asc
-| | |-- pidgin-2.5.9-x86_64-1.txt
-| | |-- pidgin-2.5.9-x86_64-1.txz
-| | |-- pidgin-2.5.9-x86_64-1.txz.asc
+| | |-- mozilla-firefox-3.6.3-x86_64-1.txt
+| | |-- mozilla-firefox-3.6.3-x86_64-1.txz
+| | |-- mozilla-firefox-3.6.3-x86_64-1.txz.asc
+| | |-- mozilla-thunderbird-3.0.4-x86_64-1.txt
+| | |-- mozilla-thunderbird-3.0.4-x86_64-1.txz
+| | |-- mozilla-thunderbird-3.0.4-x86_64-1.txz.asc
+| | |-- pan-0.133-x86_64-2.txt
+| | |-- pan-0.133-x86_64-2.txz
+| | |-- pan-0.133-x86_64-2.txz.asc
+| | |-- pidgin-2.7.0-x86_64-1.txt
+| | |-- pidgin-2.7.0-x86_64-1.txz
+| | |-- pidgin-2.7.0-x86_64-1.txz.asc
| | |-- rdesktop-1.6.0-x86_64-1.txt
| | |-- rdesktop-1.6.0-x86_64-1.txz
| | |-- rdesktop-1.6.0-x86_64-1.txz.asc
| | |-- rxvt-2.7.10-x86_64-4.txt
| | |-- rxvt-2.7.10-x86_64-4.txz
| | |-- rxvt-2.7.10-x86_64-4.txz.asc
-| | |-- sane-1.0.19-x86_64-4.txt
-| | |-- sane-1.0.19-x86_64-4.txz
-| | |-- sane-1.0.19-x86_64-4.txz.asc
-| | |-- seamonkey-1.1.17-x86_64-1.txt
-| | |-- seamonkey-1.1.17-x86_64-1.txz
-| | |-- seamonkey-1.1.17-x86_64-1.txz.asc
+| | |-- sane-1.0.21-x86_64-1.txt
+| | |-- sane-1.0.21-x86_64-1.txz
+| | |-- sane-1.0.21-x86_64-1.txz.asc
+| | |-- seamonkey-2.0.4-x86_64-1.txt
+| | |-- seamonkey-2.0.4-x86_64-1.txz
+| | |-- seamonkey-2.0.4-x86_64-1.txz.asc
| | |-- seyon-2.20c-x86_64-3.txt
| | |-- seyon-2.20c-x86_64-3.txz
| | |-- seyon-2.20c-x86_64-3.txz.asc
@@ -3616,67 +3701,70 @@ see additional documentation files. | | |-- thunar-volman-0.3.80-x86_64-1.txt
| | |-- thunar-volman-0.3.80-x86_64-1.txz
| | |-- thunar-volman-0.3.80-x86_64-1.txz.asc
-| | |-- vim-gvim-7.2.245-x86_64-1.txt
-| | |-- vim-gvim-7.2.245-x86_64-1.txz
-| | |-- vim-gvim-7.2.245-x86_64-1.txz.asc
-| | |-- windowmaker-20060427cvs-x86_64-2.txt
-| | |-- windowmaker-20060427cvs-x86_64-2.txz
-| | |-- windowmaker-20060427cvs-x86_64-2.txz.asc
+| | |-- vim-gvim-7.2.416-x86_64-1.txt
+| | |-- vim-gvim-7.2.416-x86_64-1.txz
+| | |-- vim-gvim-7.2.416-x86_64-1.txz.asc
+| | |-- windowmaker-20060427cvs-x86_64-3.txt
+| | |-- windowmaker-20060427cvs-x86_64-3.txz
+| | |-- windowmaker-20060427cvs-x86_64-3.txz.asc
| | |-- x11-ssh-askpass-1.2.4.1-x86_64-1.txt
| | |-- x11-ssh-askpass-1.2.4.1-x86_64-1.txz
| | |-- x11-ssh-askpass-1.2.4.1-x86_64-1.txz.asc
| | |-- x3270-3.3.7p8-x86_64-1.txt
| | |-- x3270-3.3.7p8-x86_64-1.txz
| | |-- x3270-3.3.7p8-x86_64-1.txz.asc
-| | |-- xchat-2.8.6-x86_64-3.txt
-| | |-- xchat-2.8.6-x86_64-3.txz
-| | |-- xchat-2.8.6-x86_64-3.txz.asc
-| | |-- xfce-4.6.1-x86_64-5.txt
-| | |-- xfce-4.6.1-x86_64-5.txz
-| | |-- xfce-4.6.1-x86_64-5.txz.asc
-| | |-- xfce4-power-manager-0.6.6-x86_64-1.txt
-| | |-- xfce4-power-manager-0.6.6-x86_64-1.txz
-| | |-- xfce4-power-manager-0.6.6-x86_64-1.txz.asc
+| | |-- xchat-2.8.6-x86_64-5.txt
+| | |-- xchat-2.8.6-x86_64-5.txz
+| | |-- xchat-2.8.6-x86_64-5.txz.asc
+| | |-- xfce-4.6.1-x86_64-8.txt
+| | |-- xfce-4.6.1-x86_64-8.txz
+| | |-- xfce-4.6.1-x86_64-8.txz.asc
+| | |-- xfce4-notifyd-0.1.0-x86_64-1.txt
+| | |-- xfce4-notifyd-0.1.0-x86_64-1.txz
+| | |-- xfce4-notifyd-0.1.0-x86_64-1.txz.asc
+| | |-- xfce4-power-manager-0.8.5-x86_64-1.txt
+| | |-- xfce4-power-manager-0.8.5-x86_64-1.txz
+| | |-- xfce4-power-manager-0.8.5-x86_64-1.txz.asc
| | |-- xfractint-20.04p09-x86_64-1.txt
| | |-- xfractint-20.04p09-x86_64-1.txz
| | |-- xfractint-20.04p09-x86_64-1.txz.asc
| | |-- xgames-0.3-x86_64-2.txt
| | |-- xgames-0.3-x86_64-2.txz
| | |-- xgames-0.3-x86_64-2.txz.asc
-| | |-- xine-lib-1.1.16.3-x86_64-5.txt
-| | |-- xine-lib-1.1.16.3-x86_64-5.txz
-| | |-- xine-lib-1.1.16.3-x86_64-5.txz.asc
-| | |-- xine-ui-0.99.5-x86_64-2.txt
-| | |-- xine-ui-0.99.5-x86_64-2.txz
-| | |-- xine-ui-0.99.5-x86_64-2.txz.asc
+| | |-- xine-lib-1.1.17-x86_64-1.txt
+| | |-- xine-lib-1.1.17-x86_64-1.txz
+| | |-- xine-lib-1.1.17-x86_64-1.txz.asc
+| | |-- xine-ui-0.99.5-x86_64-3.txt
+| | |-- xine-ui-0.99.5-x86_64-3.txz
+| | |-- xine-ui-0.99.5-x86_64-3.txz.asc
| | |-- xlockmore-5.28-x86_64-1.txt
| | |-- xlockmore-5.28-x86_64-1.txz
| | |-- xlockmore-5.28-x86_64-1.txz.asc
-| | |-- xmms-1.2.11-x86_64-3.txt
-| | |-- xmms-1.2.11-x86_64-3.txz
-| | |-- xmms-1.2.11-x86_64-3.txz.asc
-| | |-- xpaint-2.7.8.1-x86_64-2.txt
-| | |-- xpaint-2.7.8.1-x86_64-2.txz
-| | |-- xpaint-2.7.8.1-x86_64-2.txz.asc
-| | |-- xpdf-3.02pl3-x86_64-1.txt
-| | |-- xpdf-3.02pl3-x86_64-1.txz
-| | |-- xpdf-3.02pl3-x86_64-1.txz.asc
-| | |-- xsane-0.996-x86_64-1.txt
-| | |-- xsane-0.996-x86_64-1.txz
-| | |-- xsane-0.996-x86_64-1.txz.asc
-| | |-- xscreensaver-5.08-x86_64-2.txt
-| | |-- xscreensaver-5.08-x86_64-2.txz
-| | |-- xscreensaver-5.08-x86_64-2.txz.asc
-| | |-- xv-3.10a-x86_64-5.txt
-| | |-- xv-3.10a-x86_64-5.txz
-| | |-- xv-3.10a-x86_64-5.txz.asc
+| | |-- xmms-1.2.11-x86_64-4.txt
+| | |-- xmms-1.2.11-x86_64-4.txz
+| | |-- xmms-1.2.11-x86_64-4.txz.asc
+| | |-- xpaint-2.8.16-x86_64-1.txt
+| | |-- xpaint-2.8.16-x86_64-1.txz
+| | |-- xpaint-2.8.16-x86_64-1.txz.asc
+| | |-- xpdf-3.02pl4-x86_64-2.txt
+| | |-- xpdf-3.02pl4-x86_64-2.txz
+| | |-- xpdf-3.02pl4-x86_64-2.txz.asc
+| | |-- xsane-0.996-x86_64-2.txt
+| | |-- xsane-0.996-x86_64-2.txz
+| | |-- xsane-0.996-x86_64-2.txz.asc
+| | |-- xscreensaver-5.11-x86_64-1.txt
+| | |-- xscreensaver-5.11-x86_64-1.txz
+| | |-- xscreensaver-5.11-x86_64-1.txz.asc
+| | |-- xv-3.10a-x86_64-6.txt
+| | |-- xv-3.10a-x86_64-6.txz
+| | |-- xv-3.10a-x86_64-6.txz.asc
| | |-- xxgdb-1.12-x86_64-2.txt
| | |-- xxgdb-1.12-x86_64-2.txz
| | `-- xxgdb-1.12-x86_64-2.txz.asc
| `-- y
-| |-- bsd-games-2.13-x86_64-9.txt
-| |-- bsd-games-2.13-x86_64-9.txz
-| |-- bsd-games-2.13-x86_64-9.txz.asc
+| |-- bsd-games-2.13-x86_64-11.txt
+| |-- bsd-games-2.13-x86_64-11.txz
+| |-- bsd-games-2.13-x86_64-11.txz.asc
| |-- install-packages
| |-- install.end
| |-- maketag
@@ -3708,7 +3796,7 @@ see additional documentation files. | | | `-- slack-desc
| | |-- acpid
| | | |-- acpi_handler.sh.gz
-| | | |-- acpid-1.0.8.tar.bz2
+| | | |-- acpid-2.0.5.tar.gz
| | | |-- acpid.SlackBuild
| | | |-- default.gz
| | | |-- doinst.sh.gz
@@ -3725,27 +3813,24 @@ see additional documentation files. | | | |-- build
| | | `-- slack-desc
| | |-- bash
-| | | |-- bash-3.1.tar.gz
+| | | |-- bash-4.1-patches
+| | | | |-- bash41-001
+| | | | |-- bash41-001.sig
+| | | | |-- bash41-002
+| | | | |-- bash41-002.sig
+| | | | |-- bash41-003
+| | | | |-- bash41-003.sig
+| | | | |-- bash41-004
+| | | | |-- bash41-004.sig
+| | | | |-- bash41-005
+| | | | |-- bash41-005.sig
+| | | | |-- bash41-006
+| | | | |-- bash41-006.sig
+| | | | |-- bash41-007
+| | | | `-- bash41-007.sig
+| | | |-- bash-4.1.tar.xz
| | | |-- bash.SlackBuild
| | | |-- doinst.sh.gz
-| | | |-- patches
-| | | | |-- bash31-001.gz
-| | | | |-- bash31-002.gz
-| | | | |-- bash31-003.gz
-| | | | |-- bash31-004.gz
-| | | | |-- bash31-005.gz
-| | | | |-- bash31-006.gz
-| | | | |-- bash31-007.gz
-| | | | |-- bash31-008.gz
-| | | | |-- bash31-009.gz
-| | | | |-- bash31-010.gz
-| | | | |-- bash31-011.gz
-| | | | |-- bash31-012.gz
-| | | | |-- bash31-013.gz
-| | | | |-- bash31-014.gz
-| | | | |-- bash31-015.gz
-| | | | |-- bash31-016.gz
-| | | | `-- bash31-017.gz
| | | `-- slack-desc
| | |-- bin
| | | |-- banners.tar.gz
@@ -3765,8 +3850,8 @@ see additional documentation files. | | | `-- slack-desc
| | |-- coreutils
| | | |-- DIR_COLORS.gz
-| | | |-- coreutils-7.4.tar.xz
-| | | |-- coreutils-7.4.tar.xz.sig
+| | | |-- coreutils-8.5.tar.xz
+| | | |-- coreutils-8.5.tar.xz.sig
| | | |-- coreutils-dircolors.csh.gz
| | | |-- coreutils-dircolors.sh.gz
| | | |-- coreutils.SlackBuild
@@ -3778,19 +3863,24 @@ see additional documentation files. | | | |-- cpio-2.9.tar.bz2
| | | |-- cpio.SlackBuild
| | | `-- slack-desc
+| | |-- cpufrequtils
+| | | |-- cpufrequtils-007.tar.bz2
+| | | |-- cpufrequtils-007.tar.bz2.sign
+| | | |-- cpufrequtils.SlackBuild
+| | | `-- slack-desc
| | |-- cryptsetup
-| | | |-- cryptsetup-1.0.7.tar.bz2
-| | | |-- cryptsetup-1.0.7.tar.bz2.asc
+| | | |-- cryptsetup-1.1.0.tar.bz2
+| | | |-- cryptsetup-1.1.0.tar.bz2.asc
| | | |-- cryptsetup.SlackBuild
| | | `-- slack-desc
| | |-- cups
-| | | |-- cups-1.3.11-source.tar.xz
+| | | |-- cups-1.4.3-source.tar.bz2
| | | |-- cups-samba-5.0rc3.tar.gz
| | | |-- cups-windows-6.0-source.tar.bz2
| | | |-- cups.SlackBuild
-| | | |-- cups.firefox.desktop.diff.gz
| | | |-- doinst.sh.gz
-| | | `-- slack-desc
+| | | |-- slack-desc
+| | | `-- usb-backend-both-usblp-and-libusb.dpatch.gz
| | |-- cxxlibs
| | | |-- cxxlibs.SlackBuild
| | | |-- oldgcc
@@ -3801,31 +3891,23 @@ see additional documentation files. | | | |-- symlinks-to-tracked-libs
| | | `-- symlinks-to-tracked-libs64
| | |-- dbus
-| | | |-- dbus-1.2.14.tar.xz
+| | | |-- dbus-1.2.24.tar.xz
+| | | |-- dbus-1.2.x-allow_root_globally.diff.gz
| | | |-- dbus.SlackBuild
| | | |-- doinst.sh.gz
| | | |-- rc.messagebus.gz
| | | `-- slack-desc
| | |-- dcron
-| | | |-- _dcron.tar.gz
-| | | |-- dcron-2.3.3.crontab.diff4.gz
-| | | |-- dcron-2.3.3.diff.gz
-| | | |-- dcron-2.3.3.diff2.gz
-| | | |-- dcron-2.3.3.diff3.gz
-| | | |-- dcron-2.3.3.lsm
-| | | |-- dcron-2.3.3.tar.gz
-| | | |-- dcron-2.3.3.version.diff.gz
+| | | |-- crontab.c.O_EXCL.diff.gz
+| | | |-- crontab.root.gz
+| | | |-- dcron-4.4.tar.gz
| | | |-- dcron.SlackBuild
-| | | |-- dcron.fork.diff.gz
-| | | |-- dcron.tmpdir.diff.gz
+| | | |-- dcron.manpage.paths.diff.gz
+| | | |-- defs.h.TMPDIR.diff.gz
+| | | |-- doinst.sh.gz
| | | |-- run-parts.8.gz
| | | |-- run-parts.gz
| | | `-- slack-desc
-| | |-- device-mapper
-| | | |-- 64-device-mapper.rules
-| | | |-- device-mapper.1.02.28.tar.bz2
-| | | |-- device-mapper.SlackBuild
-| | | `-- slack-desc
| | |-- devs
| | | |-- _devs.tar.gz
| | | |-- devs.SlackBuild
@@ -3846,7 +3928,7 @@ see additional documentation files. | | | `-- slack-desc
| | |-- e2fsprogs
| | | |-- doinst.sh.gz
-| | | |-- e2fsprogs-1.41.8.tar.xz
+| | | |-- e2fsprogs-1.41.11.tar.xz
| | | |-- e2fsprogs.SlackBuild
| | | `-- slack-desc
| | |-- ed
@@ -3856,12 +3938,14 @@ see additional documentation files. | | |-- eject
| | | |-- eject-2.1.5.tar.bz2
| | | |-- eject.SlackBuild
+| | | |-- eject.spaces.diff.gz
| | | `-- slack-desc
| | |-- elvis
| | | |-- elvis-2.2_0.tar.bz2
| | | |-- elvis.SlackBuild
| | | |-- elvis.clr
| | | |-- elvis.clr.orig
+| | | |-- elvis.ref.c.getline.diff.gz
| | | `-- slack-desc
| | |-- etc
| | | |-- _etc.tar.gz
@@ -3870,7 +3954,7 @@ see additional documentation files. | | | |-- slack-desc
| | | `-- termcap-BSD.gz
| | |-- file
-| | | |-- file-5.03.tar.bz2
+| | | |-- file-5.04.tar.xz
| | | |-- file.SlackBuild
| | | |-- file.crdaregbin.magic.gz
| | | |-- file.etc.file.diff.gz
@@ -3895,8 +3979,7 @@ see additional documentation files. | | | |-- mtools.conf
| | | `-- slack-desc
| | |-- gawk
-| | | |-- gawk-3.1.6.tar.bz2
-| | | |-- gawk-3.1.6.tar.bz2.sig
+| | | |-- gawk-3.1.8.tar.xz
| | | |-- gawk.SlackBuild
| | | `-- slack-desc
| | |-- genpower
@@ -3944,12 +4027,12 @@ see additional documentation files. | | | |-- grep.SlackBuild
| | | `-- slack-desc
| | |-- gzip
-| | | |-- gzip-1.3.12.tar.bz2
-| | | |-- gzip-1.3.12.tar.sig
+| | | |-- gzip-1.4.tar.xz
+| | | |-- gzip-1.4.tar.xz.sig
| | | |-- gzip.SlackBuild
| | | `-- slack-desc
| | |-- hdparm
-| | | |-- hdparm-9.3.tar.bz2
+| | | |-- hdparm-9.27.tar.bz2
| | | |-- hdparm.SlackBuild
| | | `-- slack-desc
| | |-- infozip
@@ -3958,7 +4041,7 @@ see additional documentation files. | | | |-- unzip60.tar.xz
| | | `-- zip30.tar.xz
| | |-- inotify-tools
-| | | |-- inotify-tools-3.13.tar.bz2
+| | | |-- inotify-tools-3.14.tar.xz
| | | |-- inotify-tools.SlackBuild
| | | `-- slack-desc
| | |-- jfsutils
@@ -3973,13 +4056,11 @@ see additional documentation files. | | | `-- sources
| | | |-- extraf.tgz
| | | |-- kbd-1.15-keycodes-man.patch.gz
-| | | |-- kbd-1.15-po.patch.gz
-| | | |-- kbd-1.15-quiet_doc.patch.gz
| | | |-- kbd-1.15-resizecon-x86_64.patch.gz
-| | | |-- kbd-1.15-sparc.patch.gz
| | | |-- kbd-1.15-unicode_start.patch.gz
-| | | |-- kbd-1.15.tar.bz2
-| | | |-- kbd-1.15.tar.bz2.sign
+| | | |-- kbd-1.15.2-po.patch.gz
+| | | |-- kbd-1.15.2.tar.bz2
+| | | |-- kbd-1.15.2.tar.bz2.sign
| | | |-- kbd-latarcyrheb-16-fixed.tar.bz2
| | | |-- kbd-latsun-fonts.tar.bz2
| | | |-- nl.euro.diff.gz
@@ -3987,7 +4068,7 @@ see additional documentation files. | | | |-- speakup-jfw.tar.gz
| | | `-- speakupmap.map.gz
| | |-- less
-| | | |-- less-418.tar.bz2
+| | | |-- less-436.tar.bz2
| | | |-- less.SlackBuild
| | | |-- less.sysconfdir.diff.gz
| | | |-- lesspipe.sh.gz
@@ -4001,6 +4082,7 @@ see additional documentation files. | | | |-- lilo-22.8.src.tar.gz
| | | |-- lilo-22.8.src.tar.gz.sig
| | | |-- lilo.SlackBuild
+| | | |-- lilo.use_major_minor_instead_lvm_name.diff.gz
| | | |-- liloconfig
| | | |-- setup.liloconfig
| | | |-- slack-desc
@@ -4009,22 +4091,24 @@ see additional documentation files. | | | |-- slack64.bmp
| | | `-- text.lilohelp
| | |-- logrotate
-| | | |-- _logrotate.tar.gz
-| | | |-- logrotate-3.7.4.tar.gz
+| | | |-- doinst.sh.gz
+| | | |-- logrotate-3.7.8.tar.xz
| | | |-- logrotate.SlackBuild
+| | | |-- logrotate.conf.gz
+| | | |-- logrotate.cron.gz
| | | |-- logrotate.slackware.diff.gz
| | | `-- slack-desc
| | |-- lvm2
-| | | |-- LVM2.2.02.40.tar.bz2
+| | | |-- LVM2.2.02.64.tar.xz
| | | |-- doinst.sh.gz
| | | |-- lvm2.SlackBuild
| | | `-- slack-desc
| | |-- mdadm
| | | |-- doinst.sh.gz
-| | | |-- mdadm-2.6.4.tar.bz2
-| | | |-- mdadm-2.6.4.tar.bz2.sign
+| | | |-- mdadm-2.6.9.tar.bz2
+| | | |-- mdadm-2.6.9.tar.bz2.sign
| | | |-- mdadm.SlackBuild
-| | | |-- mdadm.static.small.diff.gz
+| | | |-- mdadm.static.diff.gz
| | | `-- slack-desc
| | |-- minicom
| | | |-- config.sub-x86_64.diff.gz
@@ -4041,19 +4125,7 @@ see additional documentation files. | | |-- mkinitrd
| | | |-- README.initrd
| | | |-- _initrd-tree.tar.gz
-| | | |-- archive
-| | | | |-- busybox-1.11.2.tar.bz2
-| | | | |-- busybox-1.12.0.tar.bz2
-| | | | |-- busybox-1.7.2.no-gc-sections.diff.gz
-| | | | |-- busybox-1.7.2.remove_warning.diff.gz
-| | | | |-- busybox-1.7.2.tar.bz2
-| | | | |-- busybox-1.7.2.tar.bz2.sign
-| | | | |-- busybox-dot-config.1.11.2
-| | | | |-- busybox-dot-config.1.12.0
-| | | | |-- busybox-dot-config.1.12.1
-| | | | `-- busybox-dot-config.1.7.2
-| | | |-- busybox-1.12.1.tar.bz2
-| | | |-- busybox-1.12.1_inotify.diff.gz
+| | | |-- busybox-1.15.3.tar.bz2
| | | |-- busybox-dot-config
| | | |-- init
| | | |-- keymaps.tar.gz
@@ -4063,14 +4135,11 @@ see additional documentation files. | | | |-- mkinitrd.conf.5
| | | |-- mkinitrd.conf.sample
| | | |-- mkinitrd_command_generator.sh
-| | | |-- mkinitrd_kernelcheck.diff
| | | `-- slack-desc
| | |-- module-init-tools
-| | | |-- doinst.sh.gz
-| | | |-- modprobe.favor.etc.modprobe.d.diff.gz
| | | |-- modprobe.ignore_some_suffixes.diff.gz
-| | | |-- modprobe.no_sys_check.diff.gz
-| | | |-- module-init-tools-3.6.tar.bz2
+| | | |-- modprobe.quit.whining.about.modprobe.conf.diff.gz
+| | | |-- module-init-tools-3.11.1.tar.bz2
| | | |-- module-init-tools.SlackBuild
| | | `-- slack-desc
| | |-- mt-st
@@ -4098,7 +4167,7 @@ see additional documentation files. | | | `-- slack-desc
| | |-- ntfs-3g
| | | |-- 10-ntfs-3g-policy.fdi
-| | | |-- ntfs-3g-2009.4.4.tar.bz2
+| | | |-- ntfs-3g-2010.3.6.tar.xz
| | | |-- ntfs-3g.SlackBuild
| | | `-- slack-desc
| | |-- patch
@@ -4106,7 +4175,7 @@ see additional documentation files. | | | |-- patch.SlackBuild
| | | `-- slack-desc
| | |-- pciutils
-| | | |-- pciutils-3.1.3.tar.bz2
+| | | |-- pciutils-3.1.5.tar.bz2
| | | |-- pciutils.SlackBuild
| | | |-- pciutils.ids.dest.diff.gz
| | | |-- pciutils.url
@@ -4168,33 +4237,34 @@ see additional documentation files. | | | `-- slack-desc
| | |-- rpm2tgz
| | | |-- getrpmtype.tar.gz
+| | | |-- patches
+| | | | |-- 0001-fix-d-handling.patch.gz
+| | | | |-- 0002-fix-spurious-path-to-rpm-file-with-n-option.patch.gz
+| | | | |-- 0003-allow-every-user-to-use-rpm2tgz.patch.gz
+| | | | |-- 0004-produce-more-compliant-slack-desc.patch.gz
+| | | | |-- 0005-gzip-man-info-pages.patch.gz
+| | | | `-- 0006-should-we-use-.txz-format-in-slackware-current.patch.gz
| | | |-- rpm2targz
| | | |-- rpm2targz.README
| | | |-- rpm2tgz.SlackBuild
| | | |-- rpmoffset.c
| | | `-- slack-desc
| | |-- sdparm
-| | | |-- sdparm-1.01.tar.bz2
+| | | |-- sdparm-1.04.tar.bz2
| | | |-- sdparm.SlackBuild
| | | `-- slack-desc
| | |-- sed
-| | | |-- sed-4.1.5.tar.gz
-| | | |-- sed-4.1.5.tar.gz.sig
+| | | |-- sed-4.2.1.tar.xz
| | | |-- sed.SlackBuild
| | | `-- slack-desc
| | |-- shadow
-| | | |-- _shadow.tar.gz
| | | |-- adduser
-| | | |-- shadow-4.0.3.tar.bz2
-| | | |-- shadow-4.0.3.x86_64.diff.gz
+| | | |-- doinst.sh.gz
+| | | |-- login.defs.gz
+| | | |-- shadow-4.1.4.2.tar.xz
| | | |-- shadow.SlackBuild
-| | | |-- shadow.gcc34.diff.gz
-| | | |-- shadow.login.defs.diff.gz
-| | | |-- shadow.newgrp.getlogin.gz
-| | | |-- shadow.newgrp.nopam.gz
-| | | |-- shadow.remove.obsolete.options.diff.gz
-| | | |-- shadow.shadowconfig.diff.gz
-| | | `-- slack-desc
+| | | |-- slack-desc
+| | | `-- useradd.gz
| | |-- sharutils
| | | |-- sharutils-4.7.tar.bz2
| | | |-- sharutils-4.7.tar.bz2.sig
@@ -4209,7 +4279,7 @@ see additional documentation files. | | |-- smartmontools
| | | |-- doinst.sh.gz
| | | |-- slack-desc
-| | | |-- smartmontools-5.38.tar.bz2
+| | | |-- smartmontools-5.39.1.tar.xz
| | | `-- smartmontools.SlackBuild
| | |-- splitvt
| | | |-- slack-desc
@@ -4230,8 +4300,8 @@ see additional documentation files. | | | `-- sysklogd_1.4.1-20.diff.gz
| | |-- syslinux
| | | |-- slack-desc
-| | | |-- syslinux-3.52.tar.bz2
-| | | |-- syslinux-3.52.tar.bz2.sign
+| | | |-- syslinux-3.84.tar.bz2
+| | | |-- syslinux-3.84.tar.bz2.sign
| | | `-- syslinux.SlackBuild
| | |-- sysvinit
| | | |-- doinst.sh.gz
@@ -4268,8 +4338,8 @@ see additional documentation files. | | | |-- slack-desc
| | | |-- tar-1.13.bzip2.diff.gz
| | | |-- tar-1.13.tar.gz
-| | | |-- tar-1.22-support_txz.diff.gz
-| | | |-- tar-1.22.tar.bz2
+| | | |-- tar-1.23-support_txz.diff.gz
+| | | |-- tar-1.23.tar.xz
| | | |-- tar.1.gz
| | | |-- tar.SlackBuild
| | | |-- tar.nolonezero.diff.gz
@@ -4299,6 +4369,7 @@ see additional documentation files. | | | | | `-- rc.udev.new
| | | | |-- rules.d
| | | | | |-- 40-slackware.rules
+| | | | | |-- 59-non-libata-devices.rules
| | | | | |-- 65-permissions.rules
| | | | | `-- 90-network.rules
| | | | |-- scripts
@@ -4307,8 +4378,8 @@ see additional documentation files. | | | |-- doinst.sh.gz
| | | |-- rule_generator.diff.gz
| | | |-- slack-desc
-| | | |-- udev-141.tar.bz2
-| | | |-- udev-141.tar.bz2.sign
+| | | |-- udev-153.tar.sign
+| | | |-- udev-153.tar.xz
| | | |-- udev-fixed-devices.tar.gz
| | | `-- udev.SlackBuild
| | |-- unarj
@@ -4316,9 +4387,15 @@ see additional documentation files. | | | |-- slack-desc
| | | |-- unarj.SlackBuild
| | | `-- unarj265.tar.gz
+| | |-- usb_modeswitch
+| | | |-- doinst.sh.gz
+| | | |-- slack-desc
+| | | |-- usb-modeswitch-1.1.2.tar.bz2
+| | | |-- usb-modeswitch-data-20100418.tar.bz2
+| | | `-- usb_modeswitch.SlackBuild
| | |-- usbutils
| | | |-- slack-desc
-| | | |-- usbutils-0.82.tar.bz2
+| | | |-- usbutils-0.87.tar.bz2
| | | |-- usbutils.SlackBuild
| | | `-- usbutils.ids.dest.gz
| | |-- utempter
@@ -4332,17 +4409,18 @@ see additional documentation files. | | | |-- adjtimex_1.23.orig.tar.gz
| | | |-- bsdstrings.tar.gz
| | | |-- doinst.sh.gz
-| | | |-- net-tools-1.60.tar.bz2
+| | | |-- net-tools-1.60.tar.xz
| | | |-- net-tools.diff.gz
| | | |-- net-tools_1.60-19.diff.gz
| | | |-- scsi_ioctl.h
| | | |-- setserial-2.17.tar.gz
| | | |-- setserial-rc.serial.diff.gz
+| | | |-- setserial-undef_TIOCGHAYESESP.diff.gz
| | | |-- slack-desc
-| | | |-- util-linux-ng-2.14.2.tar.bz2
+| | | |-- util-linux-ng-2.17.2.tar.xz
| | | |-- util-linux-ng.SlackBuild
| | | |-- util-linux-ng.fdisk-no-solaris.diff.gz
-| | | |-- ziptool-1.4.0.tar.bz2
+| | | |-- ziptool-1.4.0.tar.xz
| | | `-- ziptool-fix_build.patch.gz
| | |-- which
| | | |-- slack-desc
@@ -4351,11 +4429,11 @@ see additional documentation files. | | | `-- which.SlackBuild
| | |-- xfsprogs
| | | |-- slack-desc
-| | | |-- xfsprogs-3.0.1.tar.xz
+| | | |-- xfsprogs-3.1.1.tar.xz
| | | `-- xfsprogs.SlackBuild
| | |-- xz
| | | |-- slack-desc
-| | | |-- xz-4.999.8beta.tar.bz2
+| | | |-- xz-4.999.9beta.tar.bz2
| | | `-- xz.SlackBuild
| | `-- zoo
| | |-- slack-desc
@@ -4379,7 +4457,7 @@ see additional documentation files. | | | |-- acct.logdir.fhs.diff.gz
| | | `-- slack-desc
| | |-- alsa-utils
-| | | |-- alsa-utils-1.0.18.tar.bz2
+| | | |-- alsa-utils-1.0.23.tar.bz2
| | | |-- alsa-utils.SlackBuild
| | | |-- alsa-utils.alsaconf.diff.gz
| | | |-- rc.alsa.gz
@@ -4392,7 +4470,6 @@ see additional documentation files. | | | |-- license_excerpts
| | | `-- slack-desc
| | |-- ash
-| | | |-- _ash.tar.gz
| | | |-- ash-0.4.0.tar.gz
| | | |-- ash.SlackBuild
| | | |-- patches
@@ -4447,16 +4524,12 @@ see additional documentation files. | | | |-- cdrdao.SlackBuild
| | | `-- slack-desc
| | |-- cdrtools
-| | | |-- cdrtools-2.01.01a57.tar.bz2
+| | | |-- cdrtools-2.01.01a78.tar.bz2
| | | |-- cdrtools.SlackBuild
| | | |-- doinst.sh.gz
| | | |-- slack-desc
| | | |-- zisofs-tools-1.0.8.tar.bz2
| | | `-- zisofs-tools-1.0.8.tar.bz2.sign
-| | |-- cupsddk
-| | | |-- cupsddk-1.2.3-source.tar.bz2
-| | | |-- cupsddk.SlackBuild
-| | | `-- slack-desc
| | |-- dc3dd
| | | |-- dc3dd-6.12.3.tar.xz
| | | |-- dc3dd.SlackBuild
@@ -4466,7 +4539,7 @@ see additional documentation files. | | | |-- diffstat.SlackBuild
| | | `-- slack-desc
| | |-- diffutils
-| | | |-- diffutils-2.8.1.tar.gz
+| | | |-- diffutils-3.0.tar.xz
| | | |-- diffutils-sdiff-no-waitpid.patch.gz
| | | |-- diffutils.SlackBuild
| | | |-- doinst.sh.gz
@@ -4499,12 +4572,13 @@ see additional documentation files. | | | `-- slack-desc
| | |-- foomatic-filters
| | | |-- doinst.sh.gz
-| | | |-- foomatic-filters-4.0.2.tar.gz
+| | | |-- foomatic-filters-4.0.4.tar.gz
| | | |-- foomatic-filters.SlackBuild
| | | `-- slack-desc
| | |-- ghostscript
| | | |-- cidfmap.gz
-| | | |-- ghostscript-8.70.tar.xz
+| | | |-- ghostscript-8.71.tar.xz
+| | | |-- ghostscript-pdf2dsc.patch.gz
| | | |-- ghostscript.SlackBuild
| | | `-- slack-desc
| | |-- ghostscript-fonts-std
@@ -4513,7 +4587,7 @@ see additional documentation files. | | | |-- ghostscript-fonts-std.SlackBuild
| | | `-- slack-desc
| | |-- gphoto2
-| | | |-- gphoto2-2.4.5.tar.bz2
+| | | |-- gphoto2-2.4.9.tar.xz
| | | |-- gphoto2.SlackBuild
| | | `-- slack-desc
| | |-- groff
@@ -4528,9 +4602,8 @@ see additional documentation files. | | | `-- slack-desc
| | |-- hplip
| | | |-- doinst.sh.gz
-| | | |-- hplip-3.9.4b.tar.bz2
+| | | |-- hplip-3.10.2.tar.xz
| | | |-- hplip.SlackBuild
-| | | |-- hplip.prevent_segfault.diff.gz
| | | `-- slack-desc
| | |-- ispell
| | | |-- ispell-3.2.06.tar.gz
@@ -4538,11 +4611,9 @@ see additional documentation files. | | | |-- ispell.diff.gz
| | | `-- slack-desc
| | |-- jed
-| | | |-- jed-0.99-18.tar.bz2
-| | | |-- jed-0.99-18.tar.bz2.sig
+| | | |-- jed-0.99-19.tar.bz2
+| | | |-- jed-0.99-19.tar.bz2.asc
| | | |-- jed.SlackBuild
-| | | |-- jed.mouse.diff.gz
-| | | |-- jed.multibyte.diff.gz
| | | `-- slack-desc
| | |-- joe
| | | |-- joe-3.5.tar.bz2
@@ -4575,36 +4646,35 @@ see additional documentation files. | | | |-- postbuildfixes.sh
| | | |-- slack-desc
| | | |-- sources
-| | | | |-- asciidoc-8.4.5.tar.gz
+| | | | |-- asciidoc-8.5.2.tar.xz
| | | | |-- docbook-dsssl-1.79.tar.bz2
| | | | |-- docbook-dsssl-doc-1.79.tar.bz2
-| | | | |-- docbook-style-xsl-1.75.1-1.fc12.src.rpm
-| | | | |-- docbook-utils-0.6.14-17.fc12.src.rpm
+| | | | |-- docbook-style-xsl-1.75.2-5.fc13.src.rpm
+| | | | |-- docbook-utils-0.6.14-23.fc13.src.rpm
| | | | |-- docbook-xml-4.5.zip
-| | | | |-- docbook_4.5-4.diff.gz
| | | | |-- docbook_4.5.orig.tar.gz
-| | | | |-- gnome-doc-utils-0.17.2.tar.bz2
-| | | | |-- gtk-doc-1.11.tar.bz2
+| | | | |-- gnome-doc-utils-0.19.1.tar.xz
+| | | | |-- gtk-doc-1.13.tar.bz2
+| | | | |-- gtkdoc-1.13-fixref.patch.bz2
| | | | |-- libsgmls-perl_1.03ii-32.diff.gz
| | | | |-- libsgmls-perl_1.03ii.orig.tar.gz
-| | | | |-- linuxdoc-tools.lib64.diff
-| | | | |-- linuxdoc-tools_0.9.56.tar.gz
-| | | | |-- openjade-1.3.3-pre1.tar.gz
-| | | | |-- opensp-1.5.2-11.fc11.src.rpm
-| | | | |-- sgml-common-0.6.3-29.fc12.src.rpm
+| | | | |-- linuxdoc-tools-0.9.66-5.fc13.src.rpm
+| | | | |-- openjade-1.3.3-pre1.tar.xz
+| | | | |-- opensp-1.5.2-12.fc12.src.rpm
+| | | | |-- sgml-common-0.6.3-31.fc13.src.rpm
| | | | |-- source.download
-| | | | `-- xmlto-0.0.22.tar.bz2
+| | | | `-- xmlto-0.0.23.tar.xz
| | | `-- trackbuild.linuxdoc-tools
| | |-- lm_sensors
-| | | |-- lm_sensors-3.1.1.tar.bz2
-| | | |-- lm_sensors-3.1.1.tar.bz2.sig
+| | | |-- lm_sensors-3.1.2.tar.bz2
+| | | |-- lm_sensors-3.1.2.tar.bz2.sig
| | | |-- lm_sensors.SlackBuild
| | | |-- lm_sensors.makefile.diff.gz
| | | `-- slack-desc
| | |-- lsof
| | | |-- lsof.SlackBuild
-| | | |-- lsof_4.78.tar.bz2
-| | | |-- lsof_4.78.tar.bz2.sig
+| | | |-- lsof_4.83.tar.bz2
+| | | |-- lsof_4.83.tar.bz2.sig
| | | `-- slack-desc
| | |-- lsscsi
| | | |-- lsscsi-0.22.tar.bz2
@@ -4624,13 +4694,13 @@ see additional documentation files. | | | `-- slack-desc
| | |-- man-pages
| | | |-- doinst.sh.gz
-| | | |-- man-pages-3.22.tar.bz2
+| | | |-- man-pages-3.24.tar.bz2
| | | |-- man-pages-posix-2003-a.tar.bz2
| | | |-- man-pages.SlackBuild
| | | |-- slack-desc
| | | `-- whatis.sample.xz
| | |-- mc
-| | | |-- mc-20090714_git.tar.xz
+| | | |-- mc-20100509_git.tar.xz
| | | |-- mc.SlackBuild
| | | |-- profile.d
| | | | |-- mc-wrapper.csh
@@ -4642,20 +4712,19 @@ see additional documentation files. | | | |-- most-5.0.0a.tar.bz2
| | | |-- most.SlackBuild
| | | `-- slack-desc
-| | |-- mpg321
-| | | |-- mpg321-0.2.10.tar.gz
-| | | |-- mpg321.SlackBuild
+| | |-- mpg123
+| | | |-- mpg123-1.12.1.tar.xz
+| | | |-- mpg123.SlackBuild
| | | `-- slack-desc
| | |-- mysql
| | | |-- doinst.sh.gz
-| | | |-- mirror-url
-| | | |-- mysql-5.0.84.tar.xz
+| | | |-- mysql-5.1.46.tar.xz
| | | |-- mysql-embedded.build
| | | |-- mysql.SlackBuild
| | | |-- rc.mysqld.gz
| | | `-- slack-desc
| | |-- nano
-| | | |-- nano-2.0.9.tar.bz2
+| | | |-- nano-2.2.4.tar.xz
| | | |-- nano.SlackBuild
| | | `-- slack-desc
| | |-- normalize
@@ -4668,15 +4737,18 @@ see additional documentation files. | | | `-- slack-desc
| | |-- pm-utils
| | | |-- README.SLACKWARE
-| | | |-- pm-utils-1.2.5.tar.xz
+| | | |-- pm-quirks-20100316.tar.xz
+| | | |-- pm-utils-1.3.0.tar.xz
| | | |-- pm-utils.SlackBuild
| | | |-- pm-utils.url
| | | `-- slack-desc
+| | |-- powertop
+| | | |-- powertop-1.11.tar.gz
+| | | |-- powertop.SlackBuild
+| | | `-- slack-desc
| | |-- radeontool
-| | | |-- radeontool-1.5.tar.gz
+| | | |-- radeontool-1.6.1.tar.bz2
| | | |-- radeontool.SlackBuild
-| | | |-- radeontool.c.diff.gz
-| | | |-- radeontool.info
| | | `-- slack-desc
| | |-- rexima
| | | |-- rexima-1.4.tar.gz
@@ -4685,7 +4757,7 @@ see additional documentation files. | | |-- rpm
| | | |-- Packages.gz
| | | |-- doinst.sh.gz
-| | | |-- rpm-4.7.0.tar.xz
+| | | |-- rpm-4.8.0.tar.xz
| | | |-- rpm.SlackBuild
| | | `-- slack-desc
| | |-- rzip
@@ -4721,21 +4793,19 @@ see additional documentation files. | | |-- sqlite
| | | |-- COPYRIGHT.gz
| | | |-- slack-desc
-| | | |-- sqlite-3.6.14.2.tar.xz
+| | | |-- sqlite-3.6.23.1.tar.xz
| | | `-- sqlite.SlackBuild
| | |-- sudo
| | | |-- doinst.sh.gz
| | | |-- slack-desc
-| | | |-- sudo-1.6.8p12.tar.gz
-| | | |-- sudo-1.6.8p12.tar.gz.sig
+| | | |-- sudo-1.7.2p6.tar.gz
+| | | |-- sudo-1.7.2p6.tar.gz.sig
| | | `-- sudo.SlackBuild
| | |-- sysstat
+| | | |-- doinst.sh.gz
| | | |-- slack-desc
-| | | |-- sysstat-7.0.0.tar.bz2
-| | | |-- sysstat.SlackBuild
-| | | |-- sysstat.etc.sysstat.diff.gz
-| | | |-- sysstat.prefix.usr.diff.gz
-| | | `-- sysstat.var.run.diff.gz
+| | | |-- sysstat-9.0.6.1.tar.bz2
+| | | `-- sysstat.SlackBuild
| | |-- texinfo
| | | |-- dir.gz
| | | |-- doinst.sh.gz
@@ -4997,12 +5067,184 @@ see additional documentation files. | | | | |-- 7.2.242.gz
| | | | |-- 7.2.243.gz
| | | | |-- 7.2.244.gz
-| | | | `-- 7.2.245.gz
+| | | | |-- 7.2.245.gz
+| | | | |-- 7.2.246.gz
+| | | | |-- 7.2.247.gz
+| | | | |-- 7.2.248.gz
+| | | | |-- 7.2.249.gz
+| | | | |-- 7.2.250.gz
+| | | | |-- 7.2.251.gz
+| | | | |-- 7.2.252.gz
+| | | | |-- 7.2.253.gz
+| | | | |-- 7.2.254.gz
+| | | | |-- 7.2.255.gz
+| | | | |-- 7.2.256.gz
+| | | | |-- 7.2.257.gz
+| | | | |-- 7.2.258.gz
+| | | | |-- 7.2.259.gz
+| | | | |-- 7.2.260.gz
+| | | | |-- 7.2.261.gz
+| | | | |-- 7.2.262.gz
+| | | | |-- 7.2.263.gz
+| | | | |-- 7.2.264.gz
+| | | | |-- 7.2.265.gz
+| | | | |-- 7.2.266.gz
+| | | | |-- 7.2.267.gz
+| | | | |-- 7.2.268.gz
+| | | | |-- 7.2.269.gz
+| | | | |-- 7.2.270.gz
+| | | | |-- 7.2.271.gz
+| | | | |-- 7.2.272.gz
+| | | | |-- 7.2.273.gz
+| | | | |-- 7.2.274.gz
+| | | | |-- 7.2.275.gz
+| | | | |-- 7.2.276.gz
+| | | | |-- 7.2.277.gz
+| | | | |-- 7.2.278.gz
+| | | | |-- 7.2.279.gz
+| | | | |-- 7.2.280.gz
+| | | | |-- 7.2.281.gz
+| | | | |-- 7.2.282.gz
+| | | | |-- 7.2.283.gz
+| | | | |-- 7.2.284.gz
+| | | | |-- 7.2.285.gz
+| | | | |-- 7.2.286.gz
+| | | | |-- 7.2.287.gz
+| | | | |-- 7.2.288.gz
+| | | | |-- 7.2.289.gz
+| | | | |-- 7.2.290.gz
+| | | | |-- 7.2.291.gz
+| | | | |-- 7.2.292.gz
+| | | | |-- 7.2.293.gz
+| | | | |-- 7.2.294.gz
+| | | | |-- 7.2.295.gz
+| | | | |-- 7.2.296.gz
+| | | | |-- 7.2.297.gz
+| | | | |-- 7.2.298.gz
+| | | | |-- 7.2.299.gz
+| | | | |-- 7.2.300.gz
+| | | | |-- 7.2.301.gz
+| | | | |-- 7.2.302.gz
+| | | | |-- 7.2.303.gz
+| | | | |-- 7.2.304.gz
+| | | | |-- 7.2.305.gz
+| | | | |-- 7.2.306.gz
+| | | | |-- 7.2.307.gz
+| | | | |-- 7.2.308.gz
+| | | | |-- 7.2.309.gz
+| | | | |-- 7.2.310.gz
+| | | | |-- 7.2.311.gz
+| | | | |-- 7.2.312.gz
+| | | | |-- 7.2.313.gz
+| | | | |-- 7.2.314.gz
+| | | | |-- 7.2.315.gz
+| | | | |-- 7.2.316.gz
+| | | | |-- 7.2.317.gz
+| | | | |-- 7.2.318.gz
+| | | | |-- 7.2.319.gz
+| | | | |-- 7.2.320.gz
+| | | | |-- 7.2.321.gz
+| | | | |-- 7.2.322.gz
+| | | | |-- 7.2.323.gz
+| | | | |-- 7.2.324.gz
+| | | | |-- 7.2.325.gz
+| | | | |-- 7.2.326.gz
+| | | | |-- 7.2.327.gz
+| | | | |-- 7.2.328.gz
+| | | | |-- 7.2.329.gz
+| | | | |-- 7.2.330.gz
+| | | | |-- 7.2.331.gz
+| | | | |-- 7.2.332.gz
+| | | | |-- 7.2.333.gz
+| | | | |-- 7.2.334.gz
+| | | | |-- 7.2.335.gz
+| | | | |-- 7.2.336.gz
+| | | | |-- 7.2.337.gz
+| | | | |-- 7.2.338.gz
+| | | | |-- 7.2.339.gz
+| | | | |-- 7.2.340.gz
+| | | | |-- 7.2.341.gz
+| | | | |-- 7.2.342.gz
+| | | | |-- 7.2.343.gz
+| | | | |-- 7.2.344.gz
+| | | | |-- 7.2.345.gz
+| | | | |-- 7.2.346.gz
+| | | | |-- 7.2.347.gz
+| | | | |-- 7.2.348.gz
+| | | | |-- 7.2.349.gz
+| | | | |-- 7.2.350.gz
+| | | | |-- 7.2.351.gz
+| | | | |-- 7.2.352.gz
+| | | | |-- 7.2.353.gz
+| | | | |-- 7.2.354.gz
+| | | | |-- 7.2.355.gz
+| | | | |-- 7.2.356.gz
+| | | | |-- 7.2.357.gz
+| | | | |-- 7.2.358.gz
+| | | | |-- 7.2.359.gz
+| | | | |-- 7.2.360.gz
+| | | | |-- 7.2.361.gz
+| | | | |-- 7.2.362.gz
+| | | | |-- 7.2.363.gz
+| | | | |-- 7.2.364.gz
+| | | | |-- 7.2.365.gz
+| | | | |-- 7.2.366.gz
+| | | | |-- 7.2.367.gz
+| | | | |-- 7.2.368.gz
+| | | | |-- 7.2.369.gz
+| | | | |-- 7.2.370.gz
+| | | | |-- 7.2.371.gz
+| | | | |-- 7.2.372.gz
+| | | | |-- 7.2.373.gz
+| | | | |-- 7.2.374.gz
+| | | | |-- 7.2.375.gz
+| | | | |-- 7.2.376.gz
+| | | | |-- 7.2.377.gz
+| | | | |-- 7.2.378.gz
+| | | | |-- 7.2.379.gz
+| | | | |-- 7.2.380.gz
+| | | | |-- 7.2.381.gz
+| | | | |-- 7.2.382.gz
+| | | | |-- 7.2.383.gz
+| | | | |-- 7.2.384.gz
+| | | | |-- 7.2.385.gz
+| | | | |-- 7.2.386.gz
+| | | | |-- 7.2.387.gz
+| | | | |-- 7.2.388.gz
+| | | | |-- 7.2.389.gz
+| | | | |-- 7.2.390.gz
+| | | | |-- 7.2.391.gz
+| | | | |-- 7.2.392.gz
+| | | | |-- 7.2.393.gz
+| | | | |-- 7.2.394.gz
+| | | | |-- 7.2.395.gz
+| | | | |-- 7.2.396.gz
+| | | | |-- 7.2.397.gz
+| | | | |-- 7.2.398.gz
+| | | | |-- 7.2.399.gz
+| | | | |-- 7.2.400.gz
+| | | | |-- 7.2.401.gz
+| | | | |-- 7.2.402.gz
+| | | | |-- 7.2.403.gz
+| | | | |-- 7.2.404.gz
+| | | | |-- 7.2.405.gz
+| | | | |-- 7.2.406.gz
+| | | | |-- 7.2.407.gz
+| | | | |-- 7.2.408.gz
+| | | | |-- 7.2.409.gz
+| | | | |-- 7.2.410.gz
+| | | | |-- 7.2.411.gz
+| | | | |-- 7.2.412.gz
+| | | | |-- 7.2.413.gz
+| | | | |-- 7.2.414.gz
+| | | | |-- 7.2.415.gz
+| | | | `-- 7.2.416.gz
| | | |-- slack-desc.vim
| | | |-- slack-desc.vim-gvim
| | | |-- vim-7.2-lang.tar.xz
| | | |-- vim-7.2.tar.xz
| | | |-- vim-gvim.SlackBuild
+| | | |-- vim-runtime-syntax-20100510.diff.gz
| | | |-- vim.SlackBuild
| | | `-- vim.vimrc.diff.gz
| | |-- vorbis-tools
@@ -5017,7 +5259,7 @@ see additional documentation files. | | | `-- workbone_2.40.orig.tar.gz
| | |-- xfsdump
| | | |-- slack-desc
-| | | |-- xfsdump-3.0.1.tar.xz
+| | | |-- xfsdump-3.0.4.tar.xz
| | | |-- xfsdump.SlackBuild
| | | `-- xfsdump.destdir.diff.gz
| | `-- zsh
@@ -5029,23 +5271,25 @@ see additional documentation files. | | `-- zsh.SlackBuild
| |-- d
| | |-- autoconf
-| | | |-- autoconf-2.63.tar.bz2
+| | | |-- autoconf-2.65.tar.xz
+| | | |-- autoconf-2.65.tar.xz.sig
| | | |-- autoconf.SlackBuild
| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- automake
-| | | |-- automake-1.10.1.tar.bz2
+| | | |-- automake-1.11.1.tar.xz
| | | |-- automake.SlackBuild
| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- binutils
-| | | |-- binutils-2.18.50.0.9.tar.bz2
+| | | |-- binutils-2.20.51.0.8.tar.sign
+| | | |-- binutils-2.20.51.0.8.tar.xz
| | | |-- binutils.SlackBuild
-| | | |-- release.binutils-2.18.50.0.9
+| | | |-- release.binutils-2.20.51.0.8
| | | `-- slack-desc
| | |-- bison
-| | | |-- bison-2.4.1.tar.bz2
-| | | |-- bison-2.4.1.tar.bz2.sig
+| | | |-- bison-2.4.2.tar.bz2
+| | | |-- bison-2.4.2.tar.bz2.sig
| | | |-- bison.SlackBuild
| | | `-- slack-desc
| | |-- ccache
@@ -5053,19 +5297,19 @@ see additional documentation files. | | | |-- ccache.SlackBuild
| | | `-- slack-desc
| | |-- clisp
-| | | |-- clisp-2.47.tar.bz2
-| | | |-- clisp-2.47.tar.bz2.sig
+| | | |-- clisp-2.48.tar.bz2
+| | | |-- clisp-2.48.tar.bz2.sig
| | | |-- clisp.SlackBuild
| | | |-- ffcall-20080704cvs.tar.bz2
-| | | |-- libsigsegv-2.6.tar.bz2
+| | | |-- libsigsegv-2.8.tar.xz
| | | |-- slack-desc
| | | `-- source.download
| | |-- cmake
-| | | |-- cmake-2.6.2.tar.bz2
+| | | |-- cmake-2.8.1.tar.xz
| | | |-- cmake.SlackBuild
| | | `-- slack-desc
| | |-- cscope
-| | | |-- cscope-15.6.tar.bz2
+| | | |-- cscope-15.7a.tar.bz2
| | | |-- cscope.SlackBuild
| | | `-- slack-desc
| | |-- cvs
@@ -5087,9 +5331,8 @@ see additional documentation files. | | | |-- distcc.SlackBuild
| | | `-- slack-desc
| | |-- doxygen
-| | | |-- doxygen-1.5.8.src.tar.bz2
+| | | |-- doxygen-1.6.3.src.tar.xz
| | | |-- doxygen.SlackBuild
-| | | |-- doxygen.qt4.diff.gz
| | | `-- slack-desc
| | |-- flex
| | | |-- flex-2.5.35.tar.bz2
@@ -5097,7 +5340,7 @@ see additional documentation files. | | | `-- slack-desc
| | |-- gcc
| | | |-- ecj-4.3.jar
-| | | |-- gcc-4.3.3.tar.xz
+| | | |-- gcc-4.4.4.tar.xz
| | | |-- gcc-no_fixincludes.diff.gz
| | | |-- gcc.SlackBuild
| | | |-- slack-desc.gcc
@@ -5107,13 +5350,12 @@ see additional documentation files. | | | |-- slack-desc.gcc-java
| | | `-- slack-desc.gcc-objc
| | |-- gdb
-| | | |-- gdb-6.8.tar.bz2
-| | | |-- gdb-6.8.tar.bz2.sig
+| | | |-- gdb-7.1.tar.xz
| | | |-- gdb.SlackBuild
| | | `-- slack-desc
| | |-- git
-| | | |-- git-1.6.4.tar.sign
-| | | |-- git-1.6.4.tar.xz
+| | | |-- git-1.7.1.tar.sign
+| | | |-- git-1.7.1.tar.xz
| | | |-- git.SlackBuild
| | | `-- slack-desc
| | |-- gperf
@@ -5129,19 +5371,19 @@ see additional documentation files. | | | |-- indent.SlackBuild
| | | `-- slack-desc
| | |-- intltool
-| | | |-- intltool-0.40.5.tar.bz2
+| | | |-- intltool-0.40.6.tar.bz2
| | | |-- intltool.SlackBuild
| | | `-- slack-desc
| | |-- kernel-headers
| | | `-- slack-desc
| | |-- libtool
| | | |-- doinst.sh.gz
-| | | |-- libtool-1.5.26.tar.bz2
+| | | |-- libtool-2.2.6b.tar.xz
| | | |-- libtool.SlackBuild
| | | |-- libtool.no.moved.warning.diff.gz
| | | `-- slack-desc
| | |-- m4
-| | | |-- m4-1.4.13.tar.xz
+| | | |-- m4-1.4.14.tar.xz
| | | |-- m4.SlackBuild
| | | `-- slack-desc
| | |-- make
@@ -5150,16 +5392,18 @@ see additional documentation files. | | | |-- make.SlackBuild
| | | `-- slack-desc
| | |-- mercurial
-| | | |-- mercurial-1.2.1.tar.bz2
+| | | |-- doinst.sh.gz
+| | | |-- mercurial-1.5.2.tar.xz
| | | |-- mercurial.SlackBuild
| | | `-- slack-desc
| | |-- nasm
-| | | |-- nasm-2.05.01.tar.bz2
+| | | |-- nasm-2.07.tar.bz2
| | | |-- nasm.SlackBuild
| | | `-- slack-desc
| | |-- oprofile
-| | | |-- oprofile-0.9.4.tar.bz2
+| | | |-- oprofile-0.9.6.tar.xz
| | | |-- oprofile.SlackBuild
+| | | |-- oprofile.qt4.diff.gz
| | | `-- slack-desc
| | |-- p2c
| | | |-- _p2c.tar.gz
@@ -5170,13 +5414,12 @@ see additional documentation files. | | | |-- p2c_time.diff.gz
| | | `-- slack-desc
| | |-- perl
-| | | |-- DBD-mysql-4.008.tar.gz
-| | | |-- DBI-1.607.tar.gz
-| | | |-- URI-1.37.tar.gz
+| | | |-- DBD-mysql-4.013.tar.gz
+| | | |-- DBI-1.609.tar.gz
+| | | |-- URI-1.40.tar.gz
| | | |-- XML-Parser-2.36.tar.gz
| | | |-- XML-Simple-2.18.tar.gz
-| | | |-- doinst.sh.gz
-| | | |-- perl-5.10.0.tar.bz2
+| | | |-- perl-5.10.1.tar.xz
| | | |-- perl.SlackBuild
| | | |-- perl.configure.multilib.patch.gz
| | | `-- slack-desc
@@ -5196,8 +5439,8 @@ see additional documentation files. | | | |-- pmake_1.111-1.diff.gz
| | | `-- slack-desc
| | |-- python
-| | | |-- Python-2.6.2.tar.xz
-| | | |-- python-2.6.2-docs-text.tar.xz
+| | | |-- Python-2.6.4.tar.xz
+| | | |-- python-2.6.4-docs-text.tar.xz
| | | |-- python.SlackBuild
| | | |-- python.pure64.diff.gz
| | | |-- python.readline.set_pre_input_hook.diff.gz
@@ -5210,9 +5453,8 @@ see additional documentation files. | | | |-- rcs.SlackBuild
| | | `-- slack-desc
| | |-- ruby
-| | | |-- ruby-1.8.7-p174.tar.xz
+| | | |-- ruby-1.9.1-p378.tar.xz
| | | |-- ruby.SlackBuild
-| | | |-- ruby.x86_64.diff.gz
| | | `-- slack-desc
| | |-- strace
| | | |-- slack-desc
@@ -5221,7 +5463,7 @@ see additional documentation files. | | |-- subversion
| | | |-- get-svn-book.sh
| | | |-- slack-desc
-| | | |-- subversion-1.6.4.tar.xz
+| | | |-- subversion-1.6.11.tar.xz
| | | |-- subversion.SlackBuild
| | | `-- svn-book-html.tar.bz2
| | `-- swig
@@ -5231,8 +5473,8 @@ see additional documentation files. | | `-- swig.url
| |-- e
| | `-- emacs
-| | |-- doinst.sh
-| | |-- emacs-22.3.tar.bz2
+| | |-- doinst.sh.gz
+| | |-- emacs-23.2.tar.xz
| | |-- emacs.SlackBuild
| | |-- emacs.info
| | `-- slack-desc
@@ -5240,10 +5482,14 @@ see additional documentation files. | | |-- slack-desc.linux-faqs
| | `-- slack-desc.linux-howtos
| |-- installer
-| | |-- busybox-1.12.1.tar.bz2
-| | |-- busybox-1.12.1_inotify.diff.gz
+| | |-- busybox-1.15.3.tar.bz2
| | |-- busybox-dot-config
+| | |-- busybox.2.6.32.2.diff.gz
| | |-- busybox.SlackBuild
+| | |-- dhcpcd
+| | | |-- config.h.diff.gz
+| | | |-- dhcpcd-3.2.3.tar.bz2
+| | | `-- dhcpcd.sh.diff.gz
| | `-- dropbear
| | |-- doinst.sh
| | |-- dropbear-0.50.tar.bz2
@@ -5254,13 +5500,11 @@ see additional documentation files. | | |-- rc.dropbear.new
| | `-- slack-desc
| |-- k
-| | |-- 2.6.29.x-intel-crash-patch.diff.gz
| | |-- README.TXT
-| | |-- README_SECURITY.TXT
| | |-- README_SPEAKUP_PATCH.TXT
-| | |-- config-generic-2.6.29.6
-| | |-- config-huge-2.6.29.6
-| | |-- config-speakup-2.6.29.6
+| | |-- config-generic-2.6.33.4
+| | |-- config-huge-2.6.33.4
+| | |-- config-speakup-2.6.33.4
| | |-- kernel-firmware
| | | |-- kernel-firmware.SlackBuild
| | | `-- slack-desc
@@ -5274,27 +5518,25 @@ see additional documentation files. | | | |-- kernel-modules.SlackBuild
| | | |-- rc.modules.new
| | | `-- slack-desc
-| | |-- linux-2.6.29.6-01-sendpage.diff.gz
-| | |-- linux-2.6.29.6-02-default-mmap_min_addr-4096.diff.gz
-| | |-- linux-2.6.29.6.tar.sign
-| | |-- linux-2.6.29.6.tar.xz
-| | `-- speakup-2009-02-24.tar.bz2
+| | |-- linux-2.6.33.4.tar.sign
+| | |-- linux-2.6.33.4.tar.xz
+| | `-- speakup-2009-12-30.tar.xz
| |-- kde
| | |-- KDE.SlackBuild
| | |-- KDE.options
+| | |-- KDE_extra.SlackBuild
| | |-- amarok
| | | |-- amarok.SlackBuild
-| | | |-- amarok.qtscript.optional.diff.gz
| | | |-- doinst.sh.gz
| | | |-- local.options
| | | `-- slack-desc
| | |-- guidance-power-manager
| | | |-- guidance-power-manager.SlackBuild
+| | | |-- local.options
| | | `-- slack-desc
| | |-- k3b
| | | |-- doinst.sh.gz
| | | |-- k3b.SlackBuild
-| | | |-- k3b.internal.libsamplerate.diff.gz
| | | |-- local.options
| | | `-- slack-desc
| | |-- kaudiocreator
@@ -5309,6 +5551,7 @@ see additional documentation files. | | |-- kdeadmin
| | | |-- doinst.sh.gz
| | | |-- kdeadmin.SlackBuild
+| | | |-- knetworkconf.diff.gz
| | | `-- slack-desc
| | |-- kdeartwork
| | | |-- doinst.sh.gz
@@ -5319,27 +5562,32 @@ see additional documentation files. | | | | `-- kdeglobals
| | | |-- doinst.sh.gz
| | | |-- kdebase.SlackBuild
+| | | |-- module_manager_include.diff
| | | |-- profile.d
| | | | |-- kde.csh
| | | | `-- kde.sh
| | | `-- slack-desc
| | |-- kdebase-runtime
| | | |-- doinst.sh.gz
-| | | |-- kdebase-runtime-text-render-969192.diff.gz
| | | |-- kdebase-runtime.SlackBuild
-| | | |-- local.options
| | | `-- slack-desc
| | |-- kdebase-workspace
| | | |-- config
| | | | |-- Xsession
| | | | `-- Xsession.orig
| | | |-- doinst.sh.gz
+| | | |-- kcmshell_root_privilege.patch
| | | |-- kdebase-workspace.SlackBuild
+| | | |-- kdebase-workspace.kdm.server.timeout.diff.gz
| | | |-- slack-desc
| | | `-- xinit
| | | `-- xinitrc.kde
| | |-- kdebindings
+| | | |-- kdebindings-len-ptr-rfloat.diff.gz
+| | | |-- kdebindings-ruby-env.h.diff.gz
+| | | |-- kdebindings-rubyconfig.h.diff.gz
| | | |-- kdebindings.SlackBuild
+| | | |-- local.options
| | | `-- slack-desc
| | |-- kdeedu
| | | |-- doinst.sh.gz
@@ -5352,13 +5600,13 @@ see additional documentation files. | | |-- kdegraphics
| | | |-- doinst.sh.gz
| | | |-- kdegraphics.SlackBuild
+| | | |-- kdegraphics.gwenview.jpeg8.diff.gz
+| | | |-- local.options
| | | `-- slack-desc
| | |-- kdelibs
| | | |-- doinst.sh.gz
-| | | |-- fixPopupForPlasmaboard.diff.gz
| | | |-- kdelibs.SlackBuild
| | | |-- kdesu-allow_NOPASS_in_suauth.patch.gz
-| | | |-- local.options
| | | `-- slack-desc
| | |-- kdemultimedia
| | | |-- doinst.sh.gz
@@ -5367,13 +5615,18 @@ see additional documentation files. | | |-- kdenetwork
| | | |-- doinst.sh.gz
| | | |-- kdenetwork.SlackBuild
-| | | |-- kopete-r986796.diff.gz
+| | | |-- kget.kde44.CVE-2010-1000-1511.diff.gz
| | | |-- local.options
| | | `-- slack-desc
| | |-- kdepim
| | | |-- doinst.sh.gz
+| | | |-- kdepim-4.4.0-install-headers.patch
| | | |-- kdepim.SlackBuild
| | | `-- slack-desc
+| | |-- kdepim-runtime
+| | | |-- doinst.sh.gz
+| | | |-- kdepim-runtime.SlackBuild
+| | | `-- slack-desc
| | |-- kdepimlibs
| | | |-- kdepimlibs.SlackBuild
| | | `-- slack-desc
@@ -5405,30 +5658,45 @@ see additional documentation files. | | | `-- slack-desc
| | |-- kdewebdev
| | | |-- doinst.sh.gz
+| | | |-- include-tidy.patch.gz
| | | |-- kde4-kdewebdev-findtidy.diff.gz
| | | |-- kdewebdev.SlackBuild
| | | |-- slack-desc
| | | `-- tidy
| | | |-- get-tidy-cvs.sh
-| | | |-- tidy-20090604T2303.tar.xz
+| | | |-- tidy-20100503T2309.tar.xz
| | | |-- tidy.SlackBuild
| | | `-- tidy.build
| | |-- koffice
| | | |-- doinst.sh.gz
| | | |-- koffice.SlackBuild
+| | | |-- koffice.krita.png14.diff.gz
| | | |-- local.options
| | | `-- slack-desc
| | |-- konq-plugins
| | | |-- konq-plugins.SlackBuild
+| | | |-- local.options
+| | | `-- slack-desc
+| | |-- kopete-cryptography
+| | | |-- doinst.sh.gz
+| | | |-- kopete-cryptography.SlackBuild
+| | | |-- local.options
| | | `-- slack-desc
| | |-- ktorrent
| | | |-- doinst.sh.gz
| | | |-- ktorrent.SlackBuild
| | | |-- local.options
| | | `-- slack-desc
-| | |-- mplayerthumbs
-| | | |-- mplayerthumbs-1.2.tar.gz
-| | | |-- mplayerthumbs.SlackBuild
+| | |-- oxygen-icons
+| | | |-- oxygen-icons.SlackBuild
+| | | `-- slack-desc
+| | |-- polkit-kde-1
+| | | |-- local.options
+| | | |-- polkit-kde-1.SlackBuild
+| | | `-- slack-desc
+| | |-- polkit-qt-1
+| | | |-- local.options
+| | | |-- polkit-qt-1.SlackBuild
| | | `-- slack-desc
| | |-- skanlite
| | | |-- doinst.sh.gz
@@ -5437,269 +5705,295 @@ see additional documentation files. | | | `-- slack-desc
| | `-- src
| | |-- extragear
-| | | |-- amarok-2.1.1.tar.xz
-| | | |-- guidance-power-manager-4.2.4.tar.xz
-| | | |-- k3b-r948463.tar.xz
-| | | |-- kaudiocreator-r1008583.tar.xz
-| | | |-- konq-plugins-4.2.4.tar.xz
-| | | |-- ktorrent-3.2.2.tar.xz
-| | | `-- skanlite-0.3-kde4.2.4.tar.xz
-| | |-- kdeaccessibility-4.2.4.tar.xz
-| | |-- kdeadmin-4.2.4.tar.xz
-| | |-- kdeartwork-4.2.4.tar.xz
-| | |-- kdebase-4.2.4.tar.xz
-| | |-- kdebase-runtime-4.2.4.tar.xz
-| | |-- kdebase-workspace-4.2.4.tar.xz
-| | |-- kdebindings-4.2.4.tar.xz
-| | |-- kdeedu-4.2.4.tar.xz
-| | |-- kdegames-4.2.4.tar.xz
-| | |-- kdegraphics-4.2.4.tar.xz
-| | |-- kdelibs-4.2.4.tar.xz
-| | |-- kdemultimedia-4.2.4.tar.xz
-| | |-- kdenetwork-4.2.4.tar.xz
-| | |-- kdepim-4.2.4.tar.xz
-| | |-- kdepimlibs-4.2.4.tar.xz
-| | |-- kdeplasma-addons-4.2.4.tar.xz
-| | |-- kdesdk-4.2.4.tar.xz
-| | |-- kdetoys-4.2.4.tar.xz
-| | |-- kdeutils-4.2.4.tar.xz
-| | |-- kdevelop-3.9.91.tar.xz
-| | |-- kdevplatform-0.9.91.tar.xz
-| | |-- kdewebdev-4.2.4.tar.xz
-| | `-- koffice-2.0.2.tar.xz
+| | | |-- amarok-2.3.0.90.tar.bz2
+| | | |-- amarok-2.3.0.tar.xz
+| | | |-- guidance-power-manager-4.4.0.tar.xz
+| | | |-- k3b-1.91.0.tar.xz
+| | | |-- kaudiocreator-r1118889.tar.xz
+| | | |-- konq-plugins-4.4.0.tar.xz
+| | | |-- kopete-cryptography-1.3.0-kde4.4.0.tar.xz
+| | | |-- ktorrent-3.3.4.tar.xz
+| | | `-- skanlite-0.4-kde4.4.0.tar.xz
+| | |-- kdeaccessibility-4.4.3.tar.xz
+| | |-- kdeadmin-4.4.3.tar.xz
+| | |-- kdeartwork-4.4.3.tar.xz
+| | |-- kdebase-4.4.3.tar.xz
+| | |-- kdebase-runtime-4.4.3.tar.xz
+| | |-- kdebase-workspace-4.4.3.tar.xz
+| | |-- kdebindings-4.4.3.tar.xz
+| | |-- kdeedu-4.4.3.tar.xz
+| | |-- kdegames-4.4.3.tar.xz
+| | |-- kdegraphics-4.4.3.tar.xz
+| | |-- kdelibs-4.4.3.tar.xz
+| | |-- kdemultimedia-4.4.3.tar.xz
+| | |-- kdenetwork-4.4.3.tar.xz
+| | |-- kdepim-4.4.3.tar.xz
+| | |-- kdepim-runtime-4.4.3.tar.xz
+| | |-- kdepimlibs-4.4.3.tar.xz
+| | |-- kdeplasma-addons-4.4.3.tar.xz
+| | |-- kdesdk-4.4.3.tar.xz
+| | |-- kdetoys-4.4.3.tar.xz
+| | |-- kdeutils-4.4.3.tar.xz
+| | |-- kdevelop-4.0.0.tar.xz
+| | |-- kdevplatform-1.0.0.tar.xz
+| | |-- kdewebdev-4.4.3.tar.xz
+| | |-- koffice-2.1.2.tar.xz
+| | |-- oxygen-icons-4.4.3.tar.xz
+| | |-- polkit-kde-1-r1120537.tar.xz
+| | `-- polkit-qt-1-r1118744.tar.xz
| |-- kdei
-| | |-- kde-l10n-ar-4.2.4.tar.bz2
-| | |-- kde-l10n-bg-4.2.4.tar.bz2
-| | |-- kde-l10n-bn_IN-4.2.4.tar.bz2
-| | |-- kde-l10n-ca-4.2.4.tar.bz2
-| | |-- kde-l10n-cs-4.2.4.tar.bz2
-| | |-- kde-l10n-csb-4.2.4.tar.bz2
-| | |-- kde-l10n-da-4.2.4.tar.bz2
-| | |-- kde-l10n-de-4.2.4.tar.bz2
-| | |-- kde-l10n-el-4.2.4.tar.bz2
-| | |-- kde-l10n-en_GB-4.2.4.tar.bz2
-| | |-- kde-l10n-es-4.2.4.tar.bz2
-| | |-- kde-l10n-et-4.2.4.tar.bz2
-| | |-- kde-l10n-eu-4.2.4.tar.bz2
-| | |-- kde-l10n-fi-4.2.4.tar.bz2
-| | |-- kde-l10n-fr-4.2.4.tar.bz2
-| | |-- kde-l10n-ga-4.2.4.tar.bz2
-| | |-- kde-l10n-gl-4.2.4.tar.bz2
-| | |-- kde-l10n-gu-4.2.4.tar.bz2
-| | |-- kde-l10n-he-4.2.4.tar.bz2
-| | |-- kde-l10n-hi-4.2.4.tar.bz2
-| | |-- kde-l10n-hu-4.2.4.tar.bz2
-| | |-- kde-l10n-is-4.2.4.tar.bz2
-| | |-- kde-l10n-it-4.2.4.tar.bz2
-| | |-- kde-l10n-ja-4.2.4.tar.bz2
-| | |-- kde-l10n-kk-4.2.4.tar.bz2
-| | |-- kde-l10n-km-4.2.4.tar.bz2
-| | |-- kde-l10n-kn-4.2.4.tar.bz2
-| | |-- kde-l10n-ko-4.2.4.tar.bz2
-| | |-- kde-l10n-ku-4.2.4.tar.bz2
-| | |-- kde-l10n-lt-4.2.4.tar.bz2
-| | |-- kde-l10n-lv-4.2.4.tar.bz2
-| | |-- kde-l10n-mai-4.2.4.tar.bz2
-| | |-- kde-l10n-mk-4.2.4.tar.bz2
-| | |-- kde-l10n-ml-4.2.4.tar.bz2
-| | |-- kde-l10n-mr-4.2.4.tar.bz2
-| | |-- kde-l10n-nb-4.2.4.tar.bz2
-| | |-- kde-l10n-nds-4.2.4.tar.bz2
-| | |-- kde-l10n-nl-4.2.4.tar.bz2
-| | |-- kde-l10n-nn-4.2.4.tar.bz2
-| | |-- kde-l10n-pa-4.2.4.tar.bz2
-| | |-- kde-l10n-pl-4.2.4.tar.bz2
-| | |-- kde-l10n-pt-4.2.4.tar.bz2
-| | |-- kde-l10n-pt_BR-4.2.4.tar.bz2
-| | |-- kde-l10n-ro-4.2.4.tar.bz2
-| | |-- kde-l10n-ru-4.2.4.tar.bz2
-| | |-- kde-l10n-sk-4.2.4.tar.bz2
-| | |-- kde-l10n-sl-4.2.4.tar.bz2
-| | |-- kde-l10n-sr-4.2.4.tar.bz2
-| | |-- kde-l10n-sv-4.2.4.tar.bz2
-| | |-- kde-l10n-tg-4.2.4.tar.bz2
-| | |-- kde-l10n-th-4.2.4.tar.bz2
-| | |-- kde-l10n-tr-4.2.4.tar.bz2
-| | |-- kde-l10n-uk-4.2.4.tar.bz2
-| | |-- kde-l10n-wa-4.2.4.tar.bz2
-| | |-- kde-l10n-zh_CN-4.2.4.tar.bz2
-| | |-- kde-l10n-zh_TW-4.2.4.tar.bz2
-| | |-- kde-l10n.SlackBuild
-| | |-- koffice
-| | | |-- koffice-l10n-ca-2.0.2.tar.bz2
-| | | |-- koffice-l10n-cs-2.0.2.tar.bz2
-| | | |-- koffice-l10n-da-2.0.2.tar.bz2
-| | | |-- koffice-l10n-de-2.0.2.tar.bz2
-| | | |-- koffice-l10n-el-2.0.2.tar.bz2
-| | | |-- koffice-l10n-en_GB-2.0.2.tar.bz2
-| | | |-- koffice-l10n-es-2.0.2.tar.bz2
-| | | |-- koffice-l10n-et-2.0.2.tar.bz2
-| | | |-- koffice-l10n-fr-2.0.2.tar.bz2
-| | | |-- koffice-l10n-fy-2.0.2.tar.bz2
-| | | |-- koffice-l10n-gl-2.0.2.tar.bz2
-| | | |-- koffice-l10n-hi-2.0.2.tar.bz2
-| | | |-- koffice-l10n-it-2.0.2.tar.bz2
-| | | |-- koffice-l10n-ja-2.0.2.tar.bz2
-| | | |-- koffice-l10n-kk-2.0.2.tar.bz2
-| | | |-- koffice-l10n-nb-2.0.2.tar.bz2
-| | | |-- koffice-l10n-nds-2.0.2.tar.bz2
-| | | |-- koffice-l10n-nl-2.0.2.tar.bz2
-| | | |-- koffice-l10n-pl-2.0.2.tar.bz2
-| | | |-- koffice-l10n-pt-2.0.2.tar.bz2
-| | | |-- koffice-l10n-pt_BR-2.0.2.tar.bz2
-| | | |-- koffice-l10n-sv-2.0.2.tar.bz2
-| | | |-- koffice-l10n-tr-2.0.2.tar.bz2
-| | | |-- koffice-l10n-uk-2.0.2.tar.bz2
-| | | |-- koffice-l10n-wa-2.0.2.tar.bz2
-| | | |-- koffice-l10n-zh_CN-2.0.2.tar.bz2
-| | | |-- koffice-l10n-zh_TW-2.0.2.tar.bz2
-| | | |-- koffice-l10n.SlackBuild
+| | |-- kde-l10n
+| | | |-- kde-l10n-ar-4.4.3.tar.bz2
+| | | |-- kde-l10n-bg-4.4.3.tar.bz2
+| | | |-- kde-l10n-ca-4.4.3.tar.bz2
+| | | |-- kde-l10n-ca@valencia-4.4.3.tar.bz2
+| | | |-- kde-l10n-cs-4.4.3.tar.bz2
+| | | |-- kde-l10n-csb-4.4.3.tar.bz2
+| | | |-- kde-l10n-da-4.4.3.tar.bz2
+| | | |-- kde-l10n-de-4.4.3.tar.bz2
+| | | |-- kde-l10n-el-4.4.3.tar.bz2
+| | | |-- kde-l10n-en_GB-4.4.3.tar.bz2
+| | | |-- kde-l10n-eo-4.4.3.tar.bz2
+| | | |-- kde-l10n-es-4.4.3.tar.bz2
+| | | |-- kde-l10n-et-4.4.3.tar.bz2
+| | | |-- kde-l10n-eu-4.4.3.tar.bz2
+| | | |-- kde-l10n-fi-4.4.3.tar.bz2
+| | | |-- kde-l10n-fr-4.4.3.tar.bz2
+| | | |-- kde-l10n-fy-4.4.3.tar.bz2
+| | | |-- kde-l10n-ga-4.4.3.tar.bz2
+| | | |-- kde-l10n-gl-4.4.3.tar.bz2
+| | | |-- kde-l10n-gu-4.4.3.tar.bz2
+| | | |-- kde-l10n-he-4.4.3.tar.bz2
+| | | |-- kde-l10n-hi-4.4.3.tar.bz2
+| | | |-- kde-l10n-hr-4.4.3.tar.bz2
+| | | |-- kde-l10n-hu-4.4.3.tar.bz2
+| | | |-- kde-l10n-id-4.4.3.tar.bz2
+| | | |-- kde-l10n-is-4.4.3.tar.bz2
+| | | |-- kde-l10n-it-4.4.3.tar.bz2
+| | | |-- kde-l10n-ja-4.4.3.tar.bz2
+| | | |-- kde-l10n-kk-4.4.3.tar.bz2
+| | | |-- kde-l10n-km-4.4.3.tar.bz2
+| | | |-- kde-l10n-kn-4.4.3.tar.bz2
+| | | |-- kde-l10n-ko-4.4.3.tar.bz2
+| | | |-- kde-l10n-lt-4.4.3.tar.bz2
+| | | |-- kde-l10n-lv-4.4.3.tar.bz2
+| | | |-- kde-l10n-mai-4.4.3.tar.bz2
+| | | |-- kde-l10n-mk-4.4.3.tar.bz2
+| | | |-- kde-l10n-ml-4.4.3.tar.bz2
+| | | |-- kde-l10n-nb-4.4.3.tar.bz2
+| | | |-- kde-l10n-nds-4.4.3.tar.bz2
+| | | |-- kde-l10n-nl-4.4.3.tar.bz2
+| | | |-- kde-l10n-nn-4.4.3.tar.bz2
+| | | |-- kde-l10n-pa-4.4.3.tar.bz2
+| | | |-- kde-l10n-pl-4.4.3.tar.bz2
+| | | |-- kde-l10n-pt-4.4.3.tar.bz2
+| | | |-- kde-l10n-pt_BR-4.4.3.tar.bz2
+| | | |-- kde-l10n-ro-4.4.3.tar.bz2
+| | | |-- kde-l10n-ru-4.4.3.tar.bz2
+| | | |-- kde-l10n-si-4.4.3.tar.bz2
+| | | |-- kde-l10n-sk-4.4.3.tar.bz2
+| | | |-- kde-l10n-sl-4.4.3.tar.bz2
+| | | |-- kde-l10n-sr-4.4.3.tar.bz2
+| | | |-- kde-l10n-sv-4.4.3.tar.bz2
+| | | |-- kde-l10n-tg-4.4.3.tar.bz2
+| | | |-- kde-l10n-tr-4.4.3.tar.bz2
+| | | |-- kde-l10n-uk-4.4.3.tar.bz2
+| | | |-- kde-l10n-wa-4.4.3.tar.bz2
+| | | |-- kde-l10n-zh_CN-4.4.3.tar.bz2
+| | | |-- kde-l10n-zh_TW-4.4.3.tar.bz2
+| | | |-- kde-l10n.SlackBuild
| | | |-- languages
+| | | |-- local.options
| | | `-- slack-desc
-| | | |-- slack-desc.koffice-l10n-af
-| | | |-- slack-desc.koffice-l10n-ar
-| | | |-- slack-desc.koffice-l10n-az
-| | | |-- slack-desc.koffice-l10n-bg
-| | | |-- slack-desc.koffice-l10n-br
-| | | |-- slack-desc.koffice-l10n-bs
-| | | |-- slack-desc.koffice-l10n-ca
-| | | |-- slack-desc.koffice-l10n-cs
-| | | |-- slack-desc.koffice-l10n-cy
-| | | |-- slack-desc.koffice-l10n-da
-| | | |-- slack-desc.koffice-l10n-de
-| | | |-- slack-desc.koffice-l10n-el
-| | | |-- slack-desc.koffice-l10n-en_GB
-| | | |-- slack-desc.koffice-l10n-eo
-| | | |-- slack-desc.koffice-l10n-es
-| | | |-- slack-desc.koffice-l10n-et
-| | | |-- slack-desc.koffice-l10n-eu
-| | | |-- slack-desc.koffice-l10n-fa
-| | | |-- slack-desc.koffice-l10n-fi
-| | | |-- slack-desc.koffice-l10n-fr
-| | | |-- slack-desc.koffice-l10n-fy
-| | | |-- slack-desc.koffice-l10n-ga
-| | | |-- slack-desc.koffice-l10n-gl
-| | | |-- slack-desc.koffice-l10n-he
-| | | |-- slack-desc.koffice-l10n-hi
-| | | |-- slack-desc.koffice-l10n-hsb
-| | | |-- slack-desc.koffice-l10n-hu
-| | | |-- slack-desc.koffice-l10n-is
-| | | |-- slack-desc.koffice-l10n-it
-| | | |-- slack-desc.koffice-l10n-ja
-| | | |-- slack-desc.koffice-l10n-kk
-| | | |-- slack-desc.koffice-l10n-km
-| | | |-- slack-desc.koffice-l10n-lo
-| | | |-- slack-desc.koffice-l10n-lt
-| | | |-- slack-desc.koffice-l10n-lv
-| | | |-- slack-desc.koffice-l10n-mk
-| | | |-- slack-desc.koffice-l10n-ms
-| | | |-- slack-desc.koffice-l10n-mt
-| | | |-- slack-desc.koffice-l10n-nb
-| | | |-- slack-desc.koffice-l10n-nds
-| | | |-- slack-desc.koffice-l10n-ne
-| | | |-- slack-desc.koffice-l10n-nl
-| | | |-- slack-desc.koffice-l10n-nn
-| | | |-- slack-desc.koffice-l10n-no
-| | | |-- slack-desc.koffice-l10n-no_NY
-| | | |-- slack-desc.koffice-l10n-pl
-| | | |-- slack-desc.koffice-l10n-pt
-| | | |-- slack-desc.koffice-l10n-pt_BR
-| | | |-- slack-desc.koffice-l10n-ro
-| | | |-- slack-desc.koffice-l10n-ru
-| | | |-- slack-desc.koffice-l10n-se
-| | | |-- slack-desc.koffice-l10n-sk
-| | | |-- slack-desc.koffice-l10n-sl
-| | | |-- slack-desc.koffice-l10n-sr
-| | | |-- slack-desc.koffice-l10n-sr@Latn
-| | | |-- slack-desc.koffice-l10n-sv
-| | | |-- slack-desc.koffice-l10n-ta
-| | | |-- slack-desc.koffice-l10n-tg
-| | | |-- slack-desc.koffice-l10n-th
-| | | |-- slack-desc.koffice-l10n-tr
-| | | |-- slack-desc.koffice-l10n-uk
-| | | |-- slack-desc.koffice-l10n-uz
-| | | |-- slack-desc.koffice-l10n-ven
-| | | |-- slack-desc.koffice-l10n-wa
-| | | |-- slack-desc.koffice-l10n-xh
-| | | |-- slack-desc.koffice-l10n-zh_CN
-| | | |-- slack-desc.koffice-l10n-zh_TW
-| | | `-- slack-desc.koffice-l10n-zu
-| | |-- languages
-| | |-- local.options
-| | `-- slack-desc
-| | |-- slack-desc.kde-l10n-ar
-| | |-- slack-desc.kde-l10n-bg
-| | |-- slack-desc.kde-l10n-bn_IN
-| | |-- slack-desc.kde-l10n-ca
-| | |-- slack-desc.kde-l10n-cs
-| | |-- slack-desc.kde-l10n-csb
-| | |-- slack-desc.kde-l10n-da
-| | |-- slack-desc.kde-l10n-de
-| | |-- slack-desc.kde-l10n-el
-| | |-- slack-desc.kde-l10n-en_GB
-| | |-- slack-desc.kde-l10n-eo
-| | |-- slack-desc.kde-l10n-es
-| | |-- slack-desc.kde-l10n-et
-| | |-- slack-desc.kde-l10n-eu
-| | |-- slack-desc.kde-l10n-fi
-| | |-- slack-desc.kde-l10n-fr
-| | |-- slack-desc.kde-l10n-fy
-| | |-- slack-desc.kde-l10n-ga
-| | |-- slack-desc.kde-l10n-gl
-| | |-- slack-desc.kde-l10n-gu
-| | |-- slack-desc.kde-l10n-he
-| | |-- slack-desc.kde-l10n-hi
-| | |-- slack-desc.kde-l10n-hu
-| | |-- slack-desc.kde-l10n-is
-| | |-- slack-desc.kde-l10n-it
-| | |-- slack-desc.kde-l10n-ja
-| | |-- slack-desc.kde-l10n-kk
-| | |-- slack-desc.kde-l10n-km
-| | |-- slack-desc.kde-l10n-kn
-| | |-- slack-desc.kde-l10n-ko
-| | |-- slack-desc.kde-l10n-ku
-| | |-- slack-desc.kde-l10n-lt
-| | |-- slack-desc.kde-l10n-lv
-| | |-- slack-desc.kde-l10n-mai
-| | |-- slack-desc.kde-l10n-mk
-| | |-- slack-desc.kde-l10n-ml
-| | |-- slack-desc.kde-l10n-mr
-| | |-- slack-desc.kde-l10n-nb
-| | |-- slack-desc.kde-l10n-nds
-| | |-- slack-desc.kde-l10n-nl
-| | |-- slack-desc.kde-l10n-nn
-| | |-- slack-desc.kde-l10n-pa
-| | |-- slack-desc.kde-l10n-pl
-| | |-- slack-desc.kde-l10n-pt
-| | |-- slack-desc.kde-l10n-pt_BR
-| | |-- slack-desc.kde-l10n-ro
-| | |-- slack-desc.kde-l10n-ru
-| | |-- slack-desc.kde-l10n-sk
-| | |-- slack-desc.kde-l10n-sl
-| | |-- slack-desc.kde-l10n-sr
-| | |-- slack-desc.kde-l10n-sv
-| | |-- slack-desc.kde-l10n-ta
-| | |-- slack-desc.kde-l10n-tg
-| | |-- slack-desc.kde-l10n-th
-| | |-- slack-desc.kde-l10n-tr
-| | |-- slack-desc.kde-l10n-uk
-| | |-- slack-desc.kde-l10n-wa
-| | |-- slack-desc.kde-l10n-zh_CN
-| | `-- slack-desc.kde-l10n-zh_TW
+| | | |-- slack-desc.kde-l10n-ar
+| | | |-- slack-desc.kde-l10n-bg
+| | | |-- slack-desc.kde-l10n-bn_IN
+| | | |-- slack-desc.kde-l10n-ca
+| | | |-- slack-desc.kde-l10n-ca@valencia
+| | | |-- slack-desc.kde-l10n-cs
+| | | |-- slack-desc.kde-l10n-csb
+| | | |-- slack-desc.kde-l10n-da
+| | | |-- slack-desc.kde-l10n-de
+| | | |-- slack-desc.kde-l10n-el
+| | | |-- slack-desc.kde-l10n-en_GB
+| | | |-- slack-desc.kde-l10n-eo
+| | | |-- slack-desc.kde-l10n-es
+| | | |-- slack-desc.kde-l10n-et
+| | | |-- slack-desc.kde-l10n-eu
+| | | |-- slack-desc.kde-l10n-fi
+| | | |-- slack-desc.kde-l10n-fr
+| | | |-- slack-desc.kde-l10n-fy
+| | | |-- slack-desc.kde-l10n-ga
+| | | |-- slack-desc.kde-l10n-gl
+| | | |-- slack-desc.kde-l10n-gu
+| | | |-- slack-desc.kde-l10n-he
+| | | |-- slack-desc.kde-l10n-hi
+| | | |-- slack-desc.kde-l10n-hne
+| | | |-- slack-desc.kde-l10n-hr
+| | | |-- slack-desc.kde-l10n-hu
+| | | |-- slack-desc.kde-l10n-id
+| | | |-- slack-desc.kde-l10n-is
+| | | |-- slack-desc.kde-l10n-it
+| | | |-- slack-desc.kde-l10n-ja
+| | | |-- slack-desc.kde-l10n-kk
+| | | |-- slack-desc.kde-l10n-km
+| | | |-- slack-desc.kde-l10n-kn
+| | | |-- slack-desc.kde-l10n-ko
+| | | |-- slack-desc.kde-l10n-ku
+| | | |-- slack-desc.kde-l10n-lt
+| | | |-- slack-desc.kde-l10n-lv
+| | | |-- slack-desc.kde-l10n-mai
+| | | |-- slack-desc.kde-l10n-mk
+| | | |-- slack-desc.kde-l10n-ml
+| | | |-- slack-desc.kde-l10n-mr
+| | | |-- slack-desc.kde-l10n-nb
+| | | |-- slack-desc.kde-l10n-nds
+| | | |-- slack-desc.kde-l10n-nl
+| | | |-- slack-desc.kde-l10n-nn
+| | | |-- slack-desc.kde-l10n-pa
+| | | |-- slack-desc.kde-l10n-pl
+| | | |-- slack-desc.kde-l10n-pt
+| | | |-- slack-desc.kde-l10n-pt_BR
+| | | |-- slack-desc.kde-l10n-ro
+| | | |-- slack-desc.kde-l10n-ru
+| | | |-- slack-desc.kde-l10n-si
+| | | |-- slack-desc.kde-l10n-sk
+| | | |-- slack-desc.kde-l10n-sl
+| | | |-- slack-desc.kde-l10n-sr
+| | | |-- slack-desc.kde-l10n-sv
+| | | |-- slack-desc.kde-l10n-ta
+| | | |-- slack-desc.kde-l10n-tg
+| | | |-- slack-desc.kde-l10n-th
+| | | |-- slack-desc.kde-l10n-tr
+| | | |-- slack-desc.kde-l10n-uk
+| | | |-- slack-desc.kde-l10n-wa
+| | | |-- slack-desc.kde-l10n-zh_CN
+| | | `-- slack-desc.kde-l10n-zh_TW
+| | `-- koffice
+| | |-- koffice-l10n-ca-2.1.2.tar.bz2
+| | |-- koffice-l10n-ca@valencia-2.1.2.tar.bz2
+| | |-- koffice-l10n-da-2.1.2.tar.bz2
+| | |-- koffice-l10n-de-2.1.2.tar.bz2
+| | |-- koffice-l10n-el-2.1.2.tar.bz2
+| | |-- koffice-l10n-en_GB-2.1.2.tar.bz2
+| | |-- koffice-l10n-es-2.1.2.tar.bz2
+| | |-- koffice-l10n-et-2.1.2.tar.bz2
+| | |-- koffice-l10n-fr-2.1.2.tar.bz2
+| | |-- koffice-l10n-fy-2.1.2.tar.bz2
+| | |-- koffice-l10n-gl-2.1.2.tar.bz2
+| | |-- koffice-l10n-hne-2.1.2.tar.bz2
+| | |-- koffice-l10n-it-2.1.2.tar.bz2
+| | |-- koffice-l10n-ja-2.1.2.tar.bz2
+| | |-- koffice-l10n-kk-2.1.2.tar.bz2
+| | |-- koffice-l10n-nb-2.1.2.tar.bz2
+| | |-- koffice-l10n-nds-2.1.2.tar.bz2
+| | |-- koffice-l10n-nl-2.1.2.tar.bz2
+| | |-- koffice-l10n-pl-2.1.2.tar.bz2
+| | |-- koffice-l10n-pt-2.1.2.tar.bz2
+| | |-- koffice-l10n-pt_BR-2.1.2.tar.bz2
+| | |-- koffice-l10n-sv-2.1.2.tar.bz2
+| | |-- koffice-l10n-tr-2.1.2.tar.bz2
+| | |-- koffice-l10n-uk-2.1.2.tar.bz2
+| | |-- koffice-l10n-wa-2.1.2.tar.bz2
+| | |-- koffice-l10n-zh_CN-2.1.2.tar.bz2
+| | |-- koffice-l10n-zh_TW-2.1.2.tar.bz2
+| | |-- koffice-l10n.SlackBuild
+| | `-- slack-desc
+| | |-- slack-desc.koffice-l10n-af
+| | |-- slack-desc.koffice-l10n-ar
+| | |-- slack-desc.koffice-l10n-az
+| | |-- slack-desc.koffice-l10n-bg
+| | |-- slack-desc.koffice-l10n-br
+| | |-- slack-desc.koffice-l10n-bs
+| | |-- slack-desc.koffice-l10n-ca
+| | |-- slack-desc.koffice-l10n-ca@valencia
+| | |-- slack-desc.koffice-l10n-cs
+| | |-- slack-desc.koffice-l10n-cy
+| | |-- slack-desc.koffice-l10n-da
+| | |-- slack-desc.koffice-l10n-de
+| | |-- slack-desc.koffice-l10n-el
+| | |-- slack-desc.koffice-l10n-en_GB
+| | |-- slack-desc.koffice-l10n-eo
+| | |-- slack-desc.koffice-l10n-es
+| | |-- slack-desc.koffice-l10n-et
+| | |-- slack-desc.koffice-l10n-eu
+| | |-- slack-desc.koffice-l10n-fa
+| | |-- slack-desc.koffice-l10n-fi
+| | |-- slack-desc.koffice-l10n-fr
+| | |-- slack-desc.koffice-l10n-fy
+| | |-- slack-desc.koffice-l10n-ga
+| | |-- slack-desc.koffice-l10n-gl
+| | |-- slack-desc.koffice-l10n-he
+| | |-- slack-desc.koffice-l10n-hi
+| | |-- slack-desc.koffice-l10n-hne
+| | |-- slack-desc.koffice-l10n-hsb
+| | |-- slack-desc.koffice-l10n-hu
+| | |-- slack-desc.koffice-l10n-is
+| | |-- slack-desc.koffice-l10n-it
+| | |-- slack-desc.koffice-l10n-ja
+| | |-- slack-desc.koffice-l10n-kk
+| | |-- slack-desc.koffice-l10n-km
+| | |-- slack-desc.koffice-l10n-lo
+| | |-- slack-desc.koffice-l10n-lt
+| | |-- slack-desc.koffice-l10n-lv
+| | |-- slack-desc.koffice-l10n-mk
+| | |-- slack-desc.koffice-l10n-ms
+| | |-- slack-desc.koffice-l10n-mt
+| | |-- slack-desc.koffice-l10n-nb
+| | |-- slack-desc.koffice-l10n-nds
+| | |-- slack-desc.koffice-l10n-ne
+| | |-- slack-desc.koffice-l10n-nl
+| | |-- slack-desc.koffice-l10n-nn
+| | |-- slack-desc.koffice-l10n-no
+| | |-- slack-desc.koffice-l10n-no_NY
+| | |-- slack-desc.koffice-l10n-pl
+| | |-- slack-desc.koffice-l10n-pt
+| | |-- slack-desc.koffice-l10n-pt_BR
+| | |-- slack-desc.koffice-l10n-ro
+| | |-- slack-desc.koffice-l10n-ru
+| | |-- slack-desc.koffice-l10n-se
+| | |-- slack-desc.koffice-l10n-sk
+| | |-- slack-desc.koffice-l10n-sl
+| | |-- slack-desc.koffice-l10n-sr
+| | |-- slack-desc.koffice-l10n-sr@Latn
+| | |-- slack-desc.koffice-l10n-sv
+| | |-- slack-desc.koffice-l10n-ta
+| | |-- slack-desc.koffice-l10n-tg
+| | |-- slack-desc.koffice-l10n-th
+| | |-- slack-desc.koffice-l10n-tr
+| | |-- slack-desc.koffice-l10n-uk
+| | |-- slack-desc.koffice-l10n-uz
+| | |-- slack-desc.koffice-l10n-ven
+| | |-- slack-desc.koffice-l10n-wa
+| | |-- slack-desc.koffice-l10n-xh
+| | |-- slack-desc.koffice-l10n-zh_CN
+| | |-- slack-desc.koffice-l10n-zh_TW
+| | `-- slack-desc.koffice-l10n-zu
| |-- l
+| | |-- ConsoleKit
+| | | |-- ConsoleKit-0.4.1.tar.bz2
+| | | |-- ConsoleKit-20100129.tar.bz2
+| | | |-- ConsoleKit.SlackBuild
+| | | |-- doinst.sh.gz
+| | | |-- pam-foreground-compat.ck
+| | | |-- patches
+| | | | |-- consolekit-0.2.10-cleanup_console_tags.patch.gz
+| | | | |-- consolekit-dbus-permissions.patch.gz
+| | | | `-- consolekit-skipvalidation.patch.gz
+| | | `-- slack-desc
| | |-- M2Crypto
| | | |-- M2Crypto-0.19.1.tar.bz2
| | | |-- M2Crypto.SlackBuild
| | | `-- slack-desc
| | |-- PyQt
-| | | |-- PyQt-x11-gpl-4.4.4.tar.bz2
+| | | |-- PyQt-x11-gpl-4.7.3.tar.xz
| | | |-- PyQt.SlackBuild
| | | |-- PyQt.info
+| | | |-- PyQt.phonon.diff.gz
| | | `-- slack-desc
| | |-- QScintilla
-| | | |-- QScintilla-gpl-2.3.2.tar.bz2
+| | | |-- QScintilla-gpl-2.4.3.tar.xz
| | | |-- QScintilla.SlackBuild
-| | | |-- QScintilla.info
| | | `-- slack-desc
| | |-- aalib
| | | |-- aalib-1.4rc5.tar.gz
@@ -5707,12 +6001,13 @@ see additional documentation files. | | | |-- slack-desc
| | | `-- slack-desc.11line
| | |-- akonadi
-| | | |-- akonadi-1.1.2.tar.bz2
+| | | |-- README.html
+| | | |-- akonadi-1.3.1.tar.bz2
| | | |-- akonadi.SlackBuild
| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- alsa-lib
-| | | |-- alsa-lib-1.0.18.tar.bz2
+| | | |-- alsa-lib-1.0.23.tar.bz2
| | | |-- alsa-lib.SlackBuild
| | | `-- slack-desc
| | |-- alsa-oss
@@ -5720,8 +6015,8 @@ see additional documentation files. | | | |-- alsa-oss.SlackBuild
| | | `-- slack-desc
| | |-- apr
-| | | |-- apr-1.3.8.tar.bz2
-| | | |-- apr-1.3.8.tar.bz2.asc
+| | | |-- apr-1.3.9.tar.bz2
+| | | |-- apr-1.3.9.tar.bz2.asc
| | | |-- apr.SlackBuild
| | | `-- slack-desc
| | |-- apr-util
@@ -5818,9 +6113,13 @@ see additional documentation files. | | | |-- aspell6-vi-0.01.1-1.tar.bz2
| | | `-- aspell6-yi-0.01.1-1.tar.bz2
| | |-- atk
-| | | |-- atk-1.26.0.tar.bz2
+| | | |-- atk-1.30.0.tar.bz2
| | | |-- atk.SlackBuild
| | | `-- slack-desc
+| | |-- attica
+| | | |-- attica-0.1.3.tar.bz2
+| | | |-- attica.SlackBuild
+| | | `-- slack-desc
| | |-- audiofile
| | | |-- audiofile-0.2.6.tar.bz2
| | | |-- audiofile.SlackBuild
@@ -5830,17 +6129,18 @@ see additional documentation files. | | | |-- automoc4.SlackBuild
| | | `-- slack-desc
| | |-- babl
-| | | |-- babl-0.0.22.tar.bz2
+| | | |-- babl-0.1.0-build-fixes.patch.gz
+| | | |-- babl-0.1.0.tar.bz2
| | | |-- babl.SlackBuild
| | | `-- slack-desc
| | |-- boost
| | | |-- boost.SlackBuild
-| | | |-- boost.ifdef_placement.diff.gz
-| | | |-- boost_1_38_0.tar.bz2
+| | | |-- boost_1_42_0.tar.xz
| | | `-- slack-desc
| | |-- cairo
-| | | |-- cairo-1.8.6.tar.bz2
+| | | |-- cairo-1.8.8.tar.xz
| | | |-- cairo.SlackBuild
+| | | |-- cairo.libpng14.diff.gz
| | | `-- slack-desc
| | |-- chmlib
| | | |-- chmlib-0.39.tar.bz2
@@ -5867,30 +6167,40 @@ see additional documentation files. | | | |-- patch.4.4.20.2.gz
| | | `-- slack-desc
| | |-- dbus-glib
-| | | |-- dbus-glib-0.80.tar.gz
+| | | |-- dbus-glib-0.86.tar.xz
| | | |-- dbus-glib.SlackBuild
| | | `-- slack-desc
| | |-- dbus-python
-| | | |-- dbus-python-0.83.0.tar.bz2
+| | | |-- dbus-python-0.83.1.tar.gz
| | | |-- dbus-python.SlackBuild
| | | `-- slack-desc
| | |-- desktop-file-utils
-| | | |-- desktop-file-utils-0.15.tar.bz2
+| | | |-- desktop-file-utils-0.16.tar.bz2
| | | |-- desktop-file-utils.SlackBuild
+| | | |-- desktop-file-utils.quiet.warnings.diff.gz
| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- djvulibre
-| | | |-- djvulibre-3.5.21.tar.bz2
+| | | |-- djvulibre-3.5.22.tar.xz
| | | |-- djvulibre.SlackBuild
| | | |-- djvulibre.info
| | | |-- doinst.sh.gz
| | | `-- slack-desc
+| | |-- ebook-tools
+| | | |-- ebook-tools-0.1.1.tar.bz2
+| | | |-- ebook-tools.SlackBuild
+| | | |-- ebook-tools.paths.diff
+| | | `-- slack-desc
+| | |-- eggdbus
+| | | |-- eggdbus-0.6.tar.bz2
+| | | |-- eggdbus.SlackBuild
+| | | `-- slack-desc
| | |-- eigen2
-| | | |-- eigen2-r948353.tar.bz2
+| | | |-- eigen2-2.0.10.tar.xz
| | | |-- eigen2.SlackBuild
| | | `-- slack-desc
| | |-- enchant
-| | | |-- enchant-1.4.2.tar.bz2
+| | | |-- enchant-1.5.0.tar.xz
| | | |-- enchant.SlackBuild
| | | |-- enchant.info
| | | `-- slack-desc
@@ -5900,16 +6210,19 @@ see additional documentation files. | | | |-- esound.SlackBuild
| | | `-- slack-desc
| | |-- exiv2
-| | | |-- exiv2-0.18.1.tar.xz
+| | | |-- exiv2-0.18.2.tar.xz
| | | |-- exiv2.SlackBuild
| | | `-- slack-desc
| | |-- expat
| | | |-- expat-2.0.1.tar.gz
| | | |-- expat.SlackBuild
| | | `-- slack-desc
+| | |-- fftw
+| | | |-- fftw-3.2.2.tar.xz
+| | | |-- fftw.SlackBuild
+| | | `-- slack-desc
| | |-- freetype
-| | | |-- freetype-2.3.9.tar.bz2
-| | | |-- freetype-2.3.9.tar.bz2.asc
+| | | |-- freetype-2.3.12.tar.xz
| | | |-- freetype.SlackBuild
| | | |-- freetype.bytecode.interpreter.diff.gz
| | | |-- freetype.illadvisederror.diff.gz
@@ -5921,7 +6234,7 @@ see additional documentation files. | | | `-- slack-desc
| | |-- fuse
| | | |-- doinst.sh.gz
-| | | |-- fuse-2.7.4.tar.gz
+| | | |-- fuse-2.8.1.tar.gz
| | | |-- fuse.SlackBuild
| | | `-- slack-desc
| | |-- gamin
@@ -5931,6 +6244,7 @@ see additional documentation files. | | |-- gd
| | | |-- gd-2.0.35.tar.bz2
| | | |-- gd.SlackBuild
+| | | |-- gd.png14.diff.gz
| | | |-- gdlib.pc
| | | `-- slack-desc
| | |-- gdbm
@@ -5938,9 +6252,13 @@ see additional documentation files. | | | |-- gdbm.SlackBuild
| | | `-- slack-desc
| | |-- gegl
-| | | |-- gegl-0.0.22.tar.bz2
+| | | |-- gegl-0.1.0.tar.bz2
| | | |-- gegl.SlackBuild
| | | `-- slack-desc
+| | |-- giflib
+| | | |-- giflib-4.1.6.tar.xz
+| | | |-- giflib.SlackBuild
+| | | `-- slack-desc
| | |-- glib
| | | |-- glib-1.2.10.tar.bz2
| | | |-- glib.SlackBuild
@@ -5948,8 +6266,7 @@ see additional documentation files. | | | `-- slack-desc
| | |-- glib2
| | | |-- doinst.sh.gz
-| | | |-- glib-2.18.4.tar.bz2
-| | | |-- glib-CVE-2008-4316.diff.gz
+| | | |-- glib-2.22.5.tar.xz
| | | |-- glib2.SlackBuild
| | | |-- libglib2.csh
| | | |-- libglib2.sh
@@ -5959,10 +6276,9 @@ see additional documentation files. | | | |-- doinst.sh-glibc-solibs
| | | |-- doinst.sh-glibc-zoneinfo
| | | |-- glibc-2.10-dns-no-gethostbyname4.diff.gz
-| | | |-- glibc-2.9-20090316.tar.bz2
+| | | |-- glibc-2.11.1.tar.xz
+| | | |-- glibc-2.11.1.tar.xz.sig
| | | |-- glibc-cvs-checkout.sh
-| | | |-- glibc-libidn-2.7.tar.bz2
-| | | |-- glibc-libidn-2.7.tar.bz2.sig
| | | |-- glibc.SlackBuild
| | | |-- glibc.getcwd.max.macro.diff.gz
| | | |-- glibc.locale.no-archive.diff.gz
@@ -5991,10 +6307,10 @@ see additional documentation files. | | | | | `-- README
| | | | |-- setup.timeconfig
| | | | `-- timeconfig
-| | | |-- tzcode2009d.tar.gz
-| | | `-- tzdata2009d.tar.gz
+| | | |-- tzcode2010j.tar.gz
+| | | `-- tzdata2010j.tar.gz
| | |-- gmime
-| | | |-- gmime-2.2.23.tar.bz2
+| | | |-- gmime-2.4.15.tar.xz
| | | |-- gmime.SlackBuild
| | | `-- slack-desc
| | |-- gmm
@@ -6003,22 +6319,25 @@ see additional documentation files. | | | |-- gmm.info
| | | `-- slack-desc
| | |-- gmp
-| | | |-- gmp-4.2.4.tar.bz2
-| | | |-- gmp-4.2.4.tar.bz2.sig
+| | | |-- gmp-5.0.1.tar.xz
| | | |-- gmp.SlackBuild
| | | `-- slack-desc
| | |-- gnome-icon-theme
| | | |-- doinst.sh.gz
-| | | |-- gnome-icon-theme-2.26.0.tar.xz
+| | | |-- gnome-icon-theme-2.30.2.tar.xz
| | | |-- gnome-icon-theme.SlackBuild
| | | |-- gnome-icon-theme.pkgconfig.path.diff.gz
| | | `-- slack-desc
| | |-- gst-plugins-base
-| | | |-- gst-plugins-base-0.10.23.tar.xz
+| | | |-- gst-plugins-base-0.10.29.tar.xz
| | | |-- gst-plugins-base.SlackBuild
| | | `-- slack-desc
+| | |-- gst-plugins-good
+| | | |-- gst-plugins-good-0.10.22.tar.xz
+| | | |-- gst-plugins-good.SlackBuild
+| | | `-- slack-desc
| | |-- gstreamer
-| | | |-- gstreamer-0.10.23.tar.xz
+| | | |-- gstreamer-0.10.29.tar.xz
| | | |-- gstreamer.SlackBuild
| | | `-- slack-desc
| | |-- gtk+
@@ -6028,10 +6347,11 @@ see additional documentation files. | | | `-- slack-desc
| | |-- gtk+2
| | | |-- doinst.sh.gz
-| | | |-- gtk+-2.14.7.tar.bz2
+| | | |-- gtk+-2.18.9.tar.xz
| | | |-- gtk+2.SlackBuild
-| | | |-- gtk.nsplugin.diff.gz
+| | | |-- gtk.png14.diff.gz
| | | |-- gtk.pnglz.diff.gz
+| | | |-- gtk.xid.nowarningflood.diff.gz
| | | |-- profile.d
| | | | |-- gtk+.csh
| | | | `-- gtk+.sh
@@ -6044,34 +6364,36 @@ see additional documentation files. | | | `-- slack-desc
| | |-- hal
| | | |-- doinst.sh.gz
-| | | |-- hal-0.5.11.tar.xz
+| | | |-- hal-0.5.14.tar.xz
| | | |-- hal.SlackBuild
| | | |-- hal.conf.gz
| | | |-- patches
| | | | |-- 10-keymap.fdi-restore_zap.diff.gz
-| | | | |-- allow_uid_gid_ntfs.diff.gz
-| | | | |-- check_udi_properly.diff.gz
-| | | | |-- fix_led_crash.diff.gz
-| | | | |-- fix_md_crash.diff.gz
-| | | | |-- fix_segfault_in_mdraid.diff.gz
-| | | | |-- fixup_udi_strings.diff.gz
-| | | | |-- hide_more_invalid_partitions.diff.gz
-| | | | |-- ignore_dupe_add_events.diff.gz
-| | | | |-- regen_fdi_cache_if_zero_size.diff.gz
-| | | | |-- set_X_keymap_properly.diff.gz
-| | | | `-- use_udevadm_not_udevinfo.patch.gz
+| | | | |-- fix_ioperm_arguments.patch.gz
+| | | | |-- fix_libusb_detection.diff.gz
+| | | | |-- fix_segfault-dbus_error_init.patch.gz
+| | | | |-- fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff.gz
+| | | | |-- handle_input.touchpad_explicitly.diff.gz
+| | | | `-- increase_HAL_PATH_MAX_to_4096.diff.gz
| | | |-- rc.hald.gz
| | | `-- slack-desc
| | |-- hal-info
-| | | |-- hal-info-20090716.tar.gz
+| | | |-- hal-info-20091130.tar.bz2
| | | |-- hal-info.SlackBuild
+| | | |-- patches
+| | | | |-- quirk-LG_X110-keyboard.patch.gz
+| | | | `-- quirk-acer_aspire_hotkey.patch.gz
| | | `-- slack-desc
| | |-- hicolor-icon-theme
| | | |-- doinst.sh.gz
-| | | |-- hicolor-icon-theme-0.10.tar.gz
+| | | |-- hicolor-icon-theme-0.12.tar.gz
| | | |-- hicolor-icon-theme.SlackBuild
| | | |-- setup.08.gtk-update-icon-cache
| | | `-- slack-desc
+| | |-- hunspell
+| | | |-- hunspell-1.2.9.tar.xz
+| | | |-- hunspell.SlackBuild
+| | | `-- slack-desc
| | |-- icon-naming-utils
| | | |-- icon-naming-utils-0.8.90.tar.gz
| | | |-- icon-naming-utils.SlackBuild
@@ -6083,7 +6405,7 @@ see additional documentation files. | | | |-- ilmbase.info
| | | `-- slack-desc
| | |-- imlib
-| | | |-- imlib-1.9.15.tar.bz2
+| | | |-- imlib-1.9.15.tar.xz
| | | |-- imlib.SlackBuild
| | | |-- imlib.mitshm.render.diff.gz
| | | `-- slack-desc
@@ -6102,28 +6424,28 @@ see additional documentation files. | | | |-- README
| | | |-- THIRDPARTYLICENSEREADME.txt
| | | |-- Welcome.html
-| | | |-- jre-6u16-linux-x64.bin
+| | | |-- jre-6u20-linux-x64.bin
| | | |-- jre.SlackBuild
| | | |-- profile.d
| | | | |-- jre.csh
| | | | `-- jre.sh
| | | `-- slack-desc
| | |-- lcms
-| | | |-- lcms-1.18.tar.bz2
+| | | |-- lcms-1.19.tar.xz
| | | |-- lcms.SlackBuild
| | | `-- slack-desc
| | |-- lesstif
| | | |-- doinst.sh.gz
-| | | |-- lesstif-0.95.0.tar.bz2
+| | | |-- lesstif-0.95.2.tar.xz
| | | |-- lesstif.Makefile.in.patch.gz
| | | |-- lesstif.PutPixel32.patch.gz
| | | |-- lesstif.SlackBuild
-| | | |-- lesstif.gcc42.diff.gz
| | | |-- lesstif.rendertable.check.diff.gz
| | | |-- lesstif.x86_64.patch.gz
| | | `-- slack-desc
| | |-- libaio
-| | | |-- libaio-0.3.106.tar.gz
+| | | |-- libaio-0.3.109.tar.bz2
+| | | |-- libaio-0.3.109.tar.sign
| | | |-- libaio.SlackBuild
| | | `-- slack-desc
| | |-- libao
@@ -6131,7 +6453,7 @@ see additional documentation files. | | | |-- libao.SlackBuild
| | | `-- slack-desc
| | |-- libarchive
-| | | |-- libarchive-2.6.2.tar.bz2
+| | | |-- libarchive-2.8.0.tar.xz
| | | |-- libarchive.SlackBuild
| | | |-- libarchive.info
| | | `-- slack-desc
@@ -6146,8 +6468,8 @@ see additional documentation files. | | |-- libcap
| | | |-- README.SLACKWARE
| | | |-- capfaq-0.2.txt
-| | | |-- libcap-2.16.tar.bz2
-| | | |-- libcap-2.16.tar.bz2.sign
+| | | |-- libcap-2.19.tar.bz2
+| | | |-- libcap-2.19.tar.bz2.sign
| | | |-- libcap.SlackBuild
| | | |-- libcap.capability.h.fix.broken.includes.diff.gz
| | | `-- slack-desc
@@ -6159,12 +6481,16 @@ see additional documentation files. | | | |-- libcdio-0.79.tar.bz2
| | | |-- libcdio.SlackBuild
| | | `-- slack-desc
+| | |-- libdiscid
+| | | |-- libdiscid-0.2.2.tar.gz
+| | | |-- libdiscid.SlackBuild
+| | | `-- slack-desc
| | |-- libdvdread
| | | |-- libdvdread-4.1.3.tar.bz2
| | | |-- libdvdread.SlackBuild
| | | `-- slack-desc
| | |-- libexif
-| | | |-- libexif-0.6.16.tar.bz2
+| | | |-- libexif-0.6.19.tar.xz
| | | |-- libexif.SlackBuild
| | | |-- libexif.pc.diff.gz
| | | `-- slack-desc
@@ -6173,7 +6499,7 @@ see additional documentation files. | | | |-- libglade.SlackBuild
| | | `-- slack-desc
| | |-- libgphoto2
-| | | |-- libgphoto2-2.4.6.tar.xz
+| | | |-- libgphoto2-2.4.9.tar.xz
| | | |-- libgphoto2.SlackBuild
| | | `-- slack-desc
| | |-- libgpod
@@ -6181,13 +6507,9 @@ see additional documentation files. | | | |-- libgpod.SlackBuild
| | | `-- slack-desc
| | |-- libgsf
-| | | |-- libgsf-1.14.15.tar.bz2
+| | | |-- libgsf-1.14.16.tar.bz2
| | | |-- libgsf.SlackBuild
| | | `-- slack-desc
-| | |-- libgtkhtml
-| | | |-- libgtkhtml-2.11.1.tar.bz2
-| | | |-- libgtkhtml.SlackBuild
-| | | `-- slack-desc
| | |-- libical
| | | |-- README
| | | |-- libical-0.43.tar.bz2
@@ -6212,16 +6534,22 @@ see additional documentation files. | | | |-- libieee1284-0.2.11.tar.bz2
| | | |-- libieee1284.SlackBuild
| | | `-- slack-desc
+| | |-- libiodbc
+| | | |-- libiodbc-3.52.7.tar.xz
+| | | |-- libiodbc.SlackBuild
+| | | `-- slack-desc
| | |-- libjpeg
-| | | |-- _libjpeg.tar.gz
-| | | |-- jpeg-6b.diff.gz
-| | | |-- jpegsrc.v6b.tar.gz
+| | | |-- jpegsrc.v8a.tar.xz
| | | |-- libjpeg.SlackBuild
| | | `-- slack-desc
| | |-- libkarma
| | | |-- libkarma-0.1.1.tar.gz
| | | |-- libkarma.SlackBuild
| | | `-- slack-desc
+| | |-- liblastfm
+| | | |-- liblastfm-0.3.0.tar.bz2
+| | | |-- liblastfm.SlackBuild
+| | | `-- slack-desc
| | |-- libmad
| | | |-- libmad-0.15.1b.tar.gz
| | | |-- libmad-0.15.1b.tar.gz.sign
@@ -6237,7 +6565,7 @@ see additional documentation files. | | | |-- libmcs.SlackBuild
| | | `-- slack-desc
| | |-- libmng
-| | | |-- libmng-1.0.10.tar.bz2
+| | | |-- libmng-1.0.10.tar.xz
| | | |-- libmng.SlackBuild
| | | `-- slack-desc
| | |-- libmowgli
@@ -6245,11 +6573,11 @@ see additional documentation files. | | | |-- libmowgli.SlackBuild
| | | `-- slack-desc
| | |-- libmsn
-| | | |-- libmsn-r96.tar.bz2
+| | | |-- libmsn-4.1.tar.bz2
| | | |-- libmsn.SlackBuild
| | | `-- slack-desc
| | |-- libmtp
-| | | |-- libmtp-0.3.6.tar.xz
+| | | |-- libmtp-1.0.1.tar.xz
| | | |-- libmtp.SlackBuild
| | | `-- slack-desc
| | |-- libnjb
@@ -6263,8 +6591,12 @@ see additional documentation files. | | | |-- libnl.SlackBuild
| | | |-- libnl.info
| | | `-- slack-desc
+| | |-- libnotify
+| | | |-- libnotify-0.4.5.tar.xz
+| | | |-- libnotify.SlackBuild
+| | | `-- slack-desc
| | |-- libogg
-| | | |-- libogg-1.1.3.tar.bz2
+| | | |-- libogg-1.1.4.tar.xz
| | | |-- libogg.SlackBuild
| | | `-- slack-desc
| | |-- liboil
@@ -6272,23 +6604,27 @@ see additional documentation files. | | | |-- liboil.SlackBuild
| | | `-- slack-desc
| | |-- libpng
-| | | |-- libpng-1.2.37.tar.bz2
+| | | |-- libpng-1.2.43.tar.xz
+| | | |-- libpng-1.4.2.tar.xz
| | | |-- libpng.SlackBuild
-| | | |-- libpng.libs.diff.gz
| | | `-- slack-desc
| | |-- libraw1394
| | | |-- README
-| | | |-- libraw1394-2.0.0.tar.bz2
+| | | |-- libraw1394-2.0.5.tar.bz2
+| | | |-- libraw1394-2.0.5.tar.sign
| | | |-- libraw1394.SlackBuild
-| | | |-- libraw1394.info
| | | `-- slack-desc
| | |-- librsvg
| | | |-- librsvg-2.26.0.tar.bz2
| | | |-- librsvg.SlackBuild
| | | |-- librsvg_seamonkey-config.diff.gz
| | | `-- slack-desc
+| | |-- libsamplerate
+| | | |-- libsamplerate-0.1.7.tar.xz
+| | | |-- libsamplerate.SlackBuild
+| | | `-- slack-desc
| | |-- libspectre
-| | | |-- libspectre-0.2.2.tar.bz2
+| | | |-- libspectre-0.2.5.tar.bz2
| | | |-- libspectre.SlackBuild
| | | `-- slack-desc
| | |-- libtermcap
@@ -6300,21 +6636,16 @@ see additional documentation files. | | | |-- termcap.bufsize.diff.gz
| | | `-- termcap.h.diff.gz
| | |-- libtheora
-| | | |-- libtheora-1.0.tar.bz2
+| | | |-- libtheora-1.1.1.tar.xz
| | | |-- libtheora.SlackBuild
| | | `-- slack-desc
| | |-- libtiff
| | | |-- libtiff.SlackBuild
| | | |-- slack-desc
-| | | |-- tiff-3.8.2.goo-sec.diff.gz
-| | | |-- tiff-3.8.2.tar.bz2
-| | | `-- tiff-3.8.2.tiffsplit.commandline.overflow.diff.gz
-| | |-- libungif
-| | | |-- libungif-4.1.4.tar.bz2
-| | | |-- libungif.SlackBuild
-| | | `-- slack-desc
+| | | `-- tiff-3.9.2.tar.xz
| | |-- libusb
-| | | |-- libusb-0.1.12.tar.gz
+| | | |-- libusb-1.0.6.tar.bz2
+| | | |-- libusb-compat-0.1.3.tar.bz2
| | | |-- libusb.SlackBuild
| | | `-- slack-desc
| | |-- libvisual
@@ -6332,16 +6663,17 @@ see additional documentation files. | | | |-- libvncserver.info
| | | `-- slack-desc
| | |-- libvorbis
-| | | |-- libvorbis-1.2.0.tar.bz2
+| | | |-- libvorbis-1.2.3.tar.xz
| | | |-- libvorbis.SlackBuild
| | | `-- slack-desc
| | |-- libwmf
-| | | |-- libwmf-0.2.8.4.tar.bz2
+| | | |-- libwmf-0.2.8.4.tar.xz
| | | |-- libwmf.SlackBuild
+| | | |-- libwmf.png14.diff.gz
| | | |-- slack-desc
| | | `-- slack-desc-docs
| | |-- libwnck
-| | | |-- libwnck-2.26.1.tar.bz2
+| | | |-- libwnck-2.28.0.tar.bz2
| | | |-- libwnck.SlackBuild
| | | `-- slack-desc
| | |-- libwpd
@@ -6349,15 +6681,15 @@ see additional documentation files. | | | |-- libwpd.SlackBuild
| | | `-- slack-desc
| | |-- libxklavier
-| | | |-- libxklavier-3.9.tar.bz2
+| | | |-- libxklavier-5.0.tar.bz2
| | | |-- libxklavier.SlackBuild
| | | `-- slack-desc
| | |-- libxml2
-| | | |-- libxml2-2.7.3.tar.xz
+| | | |-- libxml2-2.7.6.tar.xz
| | | |-- libxml2.SlackBuild
| | | `-- slack-desc
| | |-- libxslt
-| | | |-- libxslt-1.1.24.tar.bz2
+| | | |-- libxslt-1.1.26.tar.xz
| | | |-- libxslt.SlackBuild
| | | `-- slack-desc
| | |-- libzip
@@ -6365,6 +6697,15 @@ see additional documentation files. | | | |-- libzip.SlackBuild
| | | |-- libzip.info
| | | `-- slack-desc
+| | |-- loudmouth
+| | | |-- loudmouth-1.4.3.tar.xz
+| | | |-- loudmouth.SlackBuild
+| | | |-- loudmouth.async_assertion.diff.gz
+| | | |-- loudmouth.crtpath.diff.gz
+| | | |-- loudmouth.gnutls.configure.ac.diff.gz
+| | | |-- loudmouth.sasl-md5-digest-uri.diff.gz
+| | | |-- loudmouth.stanzadrop.diff.gz
+| | | `-- slack-desc
| | |-- lzo
| | | |-- lzo-2.02.tar.gz
| | | |-- lzo.SlackBuild
@@ -6378,9 +6719,12 @@ see additional documentation files. | | | |-- mm.SlackBuild
| | | `-- slack-desc
| | |-- mpfr
-| | | |-- mpfr-2.3.1.tar.bz2
+| | | |-- mpfr-2.4.2.tar.xz
| | | |-- mpfr.SlackBuild
| | | |-- patches
+| | | | |-- patch01.gz
+| | | | |-- patch02.gz
+| | | | `-- patch03.gz
| | | `-- slack-desc
| | |-- ncurses
| | | |-- Eterm.ti
@@ -6394,16 +6738,20 @@ see additional documentation files. | | | |-- slack-desc
| | | `-- xterm.terminfo
| | |-- neon
-| | | |-- neon-0.28.4.tar.xz
+| | | |-- neon-0.29.0.tar.xz
| | | |-- neon.SlackBuild
| | | `-- slack-desc
| | |-- netpbm
-| | | |-- Makefile.config.gz
-| | | |-- netpbm-10.35.22.tar.bz2
+| | | |-- config.mk.gz
+| | | |-- netpbm-10.49.02.tar.xz
| | | |-- netpbm-manpages.tar.bz2
| | | |-- netpbm.SlackBuild
| | | |-- slack-desc
| | | `-- svn-checkout-stable.sh
+| | |-- notify-python
+| | | |-- notify-python-0.1.1.tar.bz2
+| | | |-- notify-python.SlackBuild
+| | | `-- slack-desc
| | |-- openexr
| | | |-- openexr-1.6.1.tar.bz2
| | | |-- openexr.SlackBuild
@@ -6411,42 +6759,53 @@ see additional documentation files. | | | |-- openexr.info
| | | `-- slack-desc
| | |-- pango
-| | | |-- pango-1.22.4.tar.bz2
+| | | |-- pango-1.26.2.tar.bz2
| | | |-- pango.SlackBuild
| | | |-- pango.etc.host.location.diff.gz
| | | |-- slack-desc
| | | `-- update-pango-querymodules
| | |-- parted
-| | | |-- parted-1.8.8.tar.bz2
-| | | |-- parted-1.8.8.tar.bz2.sig
+| | | |-- parted-2.2.tar.xz
| | | |-- parted.SlackBuild
| | | |-- parted.SlackBuild.static
| | | |-- parted.configure.diff.gz
| | | `-- slack-desc
| | |-- pcre
-| | | |-- pcre-7.7.tar.bz2
-| | | |-- pcre-7.7.tar.bz2.sig
+| | | |-- pcre-8.02.tar.bz2
+| | | |-- pcre-8.02.tar.bz2.sig
| | | |-- pcre.SlackBuild
| | | `-- slack-desc
| | |-- phonon
-| | | |-- phonon-4.3.1.tar.bz2
+| | | |-- phonon-4.4.1.tar.bz2
| | | |-- phonon.SlackBuild
+| | | |-- phonon.gstreamer.qt-4.5.1.diff.gz
| | | `-- slack-desc
| | |-- pil
-| | | |-- Imaging-1.1.6.tar.bz2
+| | | |-- Imaging-1.1.7.tar.xz
| | | |-- pil.SlackBuild
| | | `-- slack-desc
| | |-- pilot-link
-| | | |-- pilot-link-0.12.3.tar.bz2
-| | | |-- pilot-link-0.12.3.tar.bz2.asc
+| | | |-- pilot-link-0.12.5.tar.bz2
+| | | |-- pilot-link-0.12.5.tar.bz2.asc
| | | |-- pilot-link.SlackBuild
+| | | |-- pilot-link.png14.diff.gz
+| | | `-- slack-desc
+| | |-- polkit
+| | | |-- polkit-1-shadow.diff
+| | | |-- polkit-1_14bdfd8.tar.bz2
+| | | |-- polkit.SlackBuild
+| | | `-- slack-desc
+| | |-- polkit-gnome
+| | | |-- pkga.desktop-NotShowInKDE.diff.gz
+| | | |-- polkit-gnome-0.96.tar.bz2
+| | | |-- polkit-gnome.SlackBuild
| | | `-- slack-desc
| | |-- poppler
-| | | |-- poppler-0.10.7.tar.xz
+| | | |-- poppler-0.12.4.tar.xz
| | | |-- poppler.SlackBuild
| | | `-- slack-desc
| | |-- poppler-data
-| | | |-- poppler-data-0.2.1.tar.bz2
+| | | |-- poppler-data-0.4.0.tar.xz
| | | |-- poppler-data.SlackBuild
| | | `-- slack-desc
| | |-- popt
@@ -6454,22 +6813,22 @@ see additional documentation files. | | | |-- popt.SlackBuild
| | | `-- slack-desc
| | |-- pycairo
-| | | |-- pycairo-1.8.4.tar.bz2
+| | | |-- pycairo-1.8.8.tar.xz
| | | |-- pycairo.SlackBuild
-| | | |-- pycairo.info
+| | | |-- pycairo.url
| | | `-- slack-desc
| | |-- pycups
-| | | |-- pycups-1.9.45.tar.bz2
+| | | |-- pycups-1.9.48.tar.bz2
| | | |-- pycups.SlackBuild
| | | |-- pycups.info
| | | `-- slack-desc
| | |-- pygobject
-| | | |-- pygobject-2.16.1.tar.bz2
+| | | |-- pygobject-2.20.0.tar.bz2
| | | |-- pygobject.SlackBuild
-| | | |-- pygobject.info
+| | | |-- pygobject.url
| | | `-- slack-desc
| | |-- pygtk
-| | | |-- pygtk-2.14.1.tar.bz2
+| | | |-- pygtk-2.16.0.tar.bz2
| | | |-- pygtk.SlackBuild
| | | `-- slack-desc
| | |-- pyrex
@@ -6478,7 +6837,7 @@ see additional documentation files. | | | |-- pyrex.SlackBuild
| | | `-- slack-desc
| | |-- qca
-| | | |-- qca-2.0.1.tar.bz2
+| | | |-- qca-2.0.2.tar.bz2
| | | |-- qca.SlackBuild
| | | |-- qca.info
| | | `-- slack-desc
@@ -6506,7 +6865,7 @@ see additional documentation files. | | | |-- profile.d
| | | | |-- qt4.csh
| | | | `-- qt4.sh
-| | | |-- qt-r1008952.tar.xz
+| | | |-- qt-4.6.2_2d3d3e5.tar.xz
| | | |-- qt.SlackBuild
| | | |-- qt.mysql.h.diff.gz
| | | |-- qt.x86.cflags.diff.gz
@@ -6515,17 +6874,17 @@ see additional documentation files. | | | |-- include-everything.patch.gz
| | | |-- qtscriptgenerator-src-0.1.0.tar.gz
| | | |-- qtscriptgenerator.SlackBuild
+| | | |-- qtscriptgenerator.gcc44.diff.gz
| | | |-- qtscriptgenerator.info
| | | `-- slack-desc
| | |-- raptor
-| | | |-- raptor-1.4.18.tar.bz2
+| | | |-- raptor-1.4.21.tar.xz
| | | |-- raptor.SlackBuild
| | | |-- raptor.info
| | | `-- slack-desc
| | |-- rasqal
-| | | |-- rasqal-0.9.16.tar.bz2
+| | | |-- rasqal-0.9.19.tar.xz
| | | |-- rasqal.SlackBuild
-| | | |-- rasqal.info
| | | `-- slack-desc
| | |-- readline
| | | |-- readline-5.2-patches
@@ -6559,33 +6918,36 @@ see additional documentation files. | | | |-- readline.SlackBuild
| | | `-- slack-desc
| | |-- redland
-| | | |-- redland-1.0.8.tar.bz2
+| | | |-- redland-1.0.10.tar.xz
| | | |-- redland.SlackBuild
-| | | |-- redland.info
| | | `-- slack-desc
| | |-- sdl
-| | | |-- SDL-1.2.13.tar.bz2
-| | | |-- SDL_image-1.2.7.tar.bz2
-| | | |-- SDL_mixer-1.2.8.tar.bz2
-| | | |-- SDL_mixer-1.2.8.usrlocal.diff.gz
-| | | |-- SDL_net-1.2.7.tar.bz2
-| | | |-- SDL_ttf-2.0.9.tar.bz2
+| | | |-- SDL-1.2.14.tar.xz
+| | | |-- SDL_image-1.2.10.tar.xz
+| | | |-- SDL_mixer-1.2.11.tar.xz
+| | | |-- SDL_mixer.usrlocal.diff.gz
+| | | |-- SDL_net-1.2.7.tar.xz
+| | | |-- SDL_ttf-2.0.9.tar.xz
| | | |-- sdl.SlackBuild
| | | `-- slack-desc
+| | |-- shared-desktop-ontologies
+| | | |-- shared-desktop-ontologies-0.3.tar.bz2
+| | | |-- shared-desktop-ontologies.SlackBuild
+| | | `-- slack-desc
| | |-- shared-mime-info
| | | |-- doinst.sh.gz
-| | | |-- shared-mime-info-0.60.tar.bz2
+| | | |-- shared-mime-info-0.71.tar.bz2
| | | |-- shared-mime-info.SlackBuild
| | | `-- slack-desc
| | |-- sip
-| | | |-- sip-4.7.9.tar.bz2
+| | | |-- sip-4.10.2.tar.xz
| | | |-- sip.SlackBuild
| | | |-- sip.info
| | | `-- slack-desc
| | |-- slang
| | | |-- slack-desc
-| | | |-- slang-2.1.4.tar.bz2
-| | | |-- slang-2.1.4.tar.bz2.asc
+| | | |-- slang-2.2.2.tar.bz2
+| | | |-- slang-2.2.2.tar.bz2.asc
| | | `-- slang.SlackBuild
| | |-- slang1
| | | |-- slack-desc
@@ -6593,16 +6955,15 @@ see additional documentation files. | | | `-- slang1.SlackBuild
| | |-- soprano
| | | |-- slack-desc
-| | | |-- soprano-2.2.3.tar.bz2
-| | | |-- soprano.SlackBuild
-| | | `-- soprano.info
+| | | |-- soprano-2.4.3.tar.bz2
+| | | `-- soprano.SlackBuild
| | |-- startup-notification
| | | |-- slack-desc
-| | | |-- startup-notification-0.9.tar.bz2
+| | | |-- startup-notification-0.10.tar.bz2
| | | `-- startup-notification.SlackBuild
| | |-- strigi
| | | |-- slack-desc
-| | | |-- strigi-0.6.4.tar.bz2
+| | | |-- strigi-0.7.2.tar.bz2
| | | |-- strigi.SlackBuild
| | | `-- strigi.info
| | |-- svgalib
@@ -6612,17 +6973,22 @@ see additional documentation files. | | | |-- svgalib.SlackBuild
| | | |-- svgalib.nohelper.diff.gz
| | | `-- svgalib.prefix.diff.gz
+| | |-- system-config-printer
+| | | |-- doinst.sh.gz
+| | | |-- slack-desc
+| | | |-- system-config-printer-1.2.2.tar.xz
+| | | `-- system-config-printer.SlackBuild
| | |-- t1lib
| | | |-- slack-desc
| | | |-- t1lib-5.1.2.tar.xz
| | | `-- t1lib.SlackBuild
| | |-- taglib
| | | |-- slack-desc
-| | | |-- taglib-1.5.tar.bz2
+| | | |-- taglib-1.6.2.tar.xz
| | | `-- taglib.SlackBuild
| | |-- taglib-extras
| | | |-- slack-desc
-| | | |-- taglib-extras-0.1.3.tar.gz
+| | | |-- taglib-extras-1.0.1.tar.gz
| | | `-- taglib-extras.SlackBuild
| | |-- tango-icon-theme
| | | |-- slack-desc
@@ -6635,12 +7001,21 @@ see additional documentation files. | | |-- urwid
| | | |-- LICENSE.gz
| | | |-- slack-desc
-| | | |-- urwid-0.9.8.4.tar.gz
+| | | |-- urwid-0.9.9.1.tar.gz
| | | |-- urwid.SlackBuild
| | | `-- urwid.url
+| | |-- v4l-utils
+| | | |-- slack-desc
+| | | |-- v4l-utils-0.8.0.tar.xz
+| | | `-- v4l-utils.SlackBuild
+| | |-- virtuoso-ose
+| | | |-- doinst.sh.gz
+| | | |-- slack-desc
+| | | |-- virtuoso-opensource-6.1.1.tar.xz
+| | | `-- virtuoso-ose.SlackBuild
| | |-- vte
| | | |-- slack-desc
-| | | |-- vte-0.20.5.tar.xz
+| | | |-- vte-0.24.1.tar.bz2
| | | `-- vte.SlackBuild
| | |-- wavpack
| | | |-- slack-desc
@@ -6648,8 +7023,7 @@ see additional documentation files. | | | `-- wavpack.SlackBuild
| | |-- wv2
| | | |-- slack-desc
-| | | |-- wv2-0.2.3.tar.bz2
-| | | |-- wv2-0.2.3.tar.bz2.asc
+| | | |-- wv2-0.4.2.tar.xz
| | | `-- wv2.SlackBuild
| | `-- zlib
| | |-- slack-desc
@@ -6670,12 +7044,10 @@ see additional documentation files. | | | |-- slack-desc.alpine
| | | `-- slack-desc.imapd
| | |-- autofs
-| | | |-- autofs-3.1.7.diff.gz
-| | | |-- autofs-3.1.7.tar.bz2
-| | | |-- autofs-3.1.7.tar.bz2.sign
+| | | |-- autofs-5.0.5-fix-libxml2-workaround-configure.patch.gz
+| | | |-- autofs-5.0.5.tar.bz2
| | | |-- autofs.SlackBuild
-| | | |-- autofs.gcc.fix.diff.gz
-| | | |-- autofs.x86_64.diff.gz
+| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- biff+comsat
| | | |-- biff+comsat-0.17.diff.gz
@@ -6686,8 +7058,8 @@ see additional documentation files. | | | `-- slack-desc
| | |-- bind
| | | |-- 3link.sh
-| | | |-- bind-9.4.3-P3.tar.gz
-| | | |-- bind-9.4.3-P3.tar.gz.asc
+| | | |-- bind-9.4.3-P4.tar.gz
+| | | |-- bind-9.4.3-P4.tar.gz.asc
| | | |-- bind.SlackBuild
| | | |-- bind.man.diff.gz
| | | |-- bind.so_bsdcompat.diff.gz
@@ -6700,6 +7072,20 @@ see additional documentation files. | | | |-- doinst.sh.gz
| | | |-- rc.bind
| | | `-- slack-desc
+| | |-- bluez
+| | | |-- bluez-4.64.tar.xz
+| | | |-- bluez.SlackBuild
+| | | |-- config
+| | | | |-- bluetooth.modprobe
+| | | | |-- bluetooth.sh
+| | | | `-- rc.bluetooth
+| | | |-- doinst.sh.gz
+| | | |-- passkey-agent.c
+| | | |-- patches
+| | | | |-- bluez-dbus-config.patch.gz
+| | | | |-- bluez-run_udev_helper.patch.gz
+| | | | `-- bluez-unbreak_dell_mouse.patch.gz
+| | | `-- slack-desc
| | |-- bluez-firmware
| | | |-- bluez-firmware-1.2.tar.bz2
| | | |-- bluez-firmware.SlackBuild
@@ -6707,22 +7093,7 @@ see additional documentation files. | | |-- bluez-hcidump
| | | |-- bluez-hcidump-1.42.tar.bz2
| | | |-- bluez-hcidump.SlackBuild
-| | | `-- slack-desc
-| | |-- bluez-libs
-| | | |-- bluez-libs-3.36.tar.bz2
-| | | |-- bluez-libs.SlackBuild
-| | | `-- slack-desc
-| | |-- bluez-utils
-| | | |-- 60-bluetooth.rules
-| | | |-- README.SLACKWARE
-| | | |-- add-passkey.c
-| | | |-- bluetooth.conf
-| | | |-- bluez-utils-3.36.tar.bz2
-| | | |-- bluez-utils.SlackBuild
-| | | |-- doinst.sh.gz
-| | | |-- rc.bluetooth
-| | | |-- rc.bluetooth.conf
-| | | |-- register-passkeys
+| | | |-- hci.c_for_bluez-4.61.patch.gz
| | | `-- slack-desc
| | |-- bootp
| | | |-- _bootp.tar.gz
@@ -6742,15 +7113,15 @@ see additional documentation files. | | | |-- bsd-finger.SlackBuild
| | | `-- slack-desc
| | |-- crda
-| | | |-- crda-1.0.1.tar.bz2
+| | | |-- crda-1.1.1.tar.bz2
| | | |-- crda.SlackBuild
| | | |-- get_regdb.sh
| | | |-- slack-desc
-| | | `-- wireless-regdb-git_20090222.tar.bz2
+| | | `-- wireless-regdb-git_20100502.tar.bz2
| | |-- curl
| | | |-- cacert.pem.bz2
-| | | |-- curl-7.19.6.tar.bz2
-| | | |-- curl-7.19.6.tar.bz2.asc
+| | | |-- curl-7.20.1.tar.bz2
+| | | |-- curl-7.20.1.tar.bz2.asc
| | | |-- curl.SlackBuild
| | | `-- slack-desc
| | |-- cyrus-sasl
@@ -6760,26 +7131,24 @@ see additional documentation files. | | | |-- rc.saslauthd.gz
| | | `-- slack-desc
| | |-- dhcp
-| | | |-- dhcp-3.1.2p1.tar.gz
-| | | |-- dhcp-3.1.2p1.tar.gz.asc
+| | | |-- dhclient-script.PATH.diff.gz
+| | | |-- dhcp-4.1.1.tar.xz
| | | |-- dhcp.SlackBuild
+| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- dhcpcd
+| | | |-- 50-ntp.conf.diff.gz
| | | |-- COPYRIGHT.gz
-| | | |-- dhcpcd-3.2.3.tar.bz2
+| | | |-- dhcpcd-5.2.2.tar.bz2
| | | |-- dhcpcd.SlackBuild
-| | | |-- dhcpcd.vararg.diff.gz
-| | | |-- patches
-| | | | |-- config.h.diff.gz
-| | | | |-- dhcpcd.8.in.diff.gz
-| | | | `-- dhcpcd.sh.diff.gz
+| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- dirmngr
| | | |-- dirmngr-1.0.3.tar.bz2
| | | |-- dirmngr.SlackBuild
| | | `-- slack-desc
| | |-- dnsmasq
-| | | |-- dnsmasq-2.49.tar.bz2
+| | | |-- dnsmasq-2.52.tar.xz
| | | |-- dnsmasq.SlackBuild
| | | |-- dnsmasq.leasedir.diff.gz
| | | |-- doinst.sh.gz
@@ -6790,35 +7159,36 @@ see additional documentation files. | | | |-- elm.SlackBuild
| | | |-- elm2.5.8.tar.bz2
| | | `-- slack-desc
-| | |-- epic4
-| | | |-- epic4-2.8.tar.bz2
-| | | |-- epic4-help-20070509.tar.bz2
-| | | |-- epic4.SlackBuild
+| | |-- epic5
+| | | |-- epic-help-current.tar.xz
+| | | |-- epic5-1.1.2.tar.xz
+| | | |-- epic5.SlackBuild
| | | `-- slack-desc
| | |-- ethtool
-| | | |-- ethtool-6.tar.gz
+| | | |-- ethtool-2.6.33.tar.gz
| | | |-- ethtool.SlackBuild
| | | `-- slack-desc
| | |-- fetchmail
-| | | |-- fetchmail-6.3.11.tar.bz2
-| | | |-- fetchmail-6.3.11.tar.bz2.asc
+| | | |-- fetchmail-6.3.17.tar.bz2
+| | | |-- fetchmail-6.3.17.tar.bz2.asc
| | | |-- fetchmail.SlackBuild
| | | `-- slack-desc
| | |-- getmail
-| | | |-- getmail-4.11.0.tar.gz
+| | | |-- getmail-4.17.0.tar.gz
| | | |-- getmail.SlackBuild
| | | `-- slack-desc
| | |-- gnupg
-| | | |-- gnupg-1.4.9.tar.bz2
-| | | |-- gnupg-1.4.9.tar.bz2.sig
+| | | |-- gnupg-1.4.10.tar.bz2
+| | | |-- gnupg-1.4.10.tar.bz2.sig
| | | |-- gnupg.SlackBuild
| | | `-- slack-desc.gnupg
| | |-- gnupg2
-| | | |-- gnupg-2.0.12.tar.bz2
+| | | |-- gnupg-2.0.14-encode-s2k.patch.gz
+| | | |-- gnupg-2.0.14.tar.xz
| | | |-- gnupg2.SlackBuild
| | | `-- slack-desc
| | |-- gnutls
-| | | |-- gnutls-2.6.6.tar.xz
+| | | |-- gnutls-2.8.6.tar.xz
| | | |-- gnutls.SlackBuild
| | | `-- slack-desc
| | |-- gpa
@@ -6827,7 +7197,8 @@ see additional documentation files. | | | |-- gpa.SlackBuild
| | | `-- slack-desc
| | |-- gpgme
-| | | |-- gpgme-1.1.8.tar.bz2
+| | | |-- gpgme-1.2.0.tar.bz2
+| | | |-- gpgme-1.2.0.tar.bz2.sig
| | | |-- gpgme.SlackBuild
| | | `-- slack-desc
| | |-- htdig
@@ -6841,8 +7212,8 @@ see additional documentation files. | | | |-- README
| | | |-- config.layout.diff.gz
| | | |-- doinst.sh.gz
-| | | |-- httpd-2.2.13.tar.bz2
-| | | |-- httpd-2.2.13.tar.bz2.asc
+| | | |-- httpd-2.2.15.tar.bz2
+| | | |-- httpd-2.2.15.tar.bz2.asc
| | | |-- httpd.SlackBuild
| | | |-- httpd.nossldefault.diff.gz
| | | |-- httpd.runasapache.diff.gz
@@ -6863,14 +7234,13 @@ see additional documentation files. | | | `-- slack-desc
| | |-- iproute2
| | | |-- doinst.sh.gz
-| | | |-- iproute2-2.6.29-1.tar.bz2
-| | | |-- iproute2-2.6.29-1.tar.bz2.sig
+| | | |-- iproute2-2.6.33-fixup_dbpath_and_iptablespath.diff.gz
+| | | |-- iproute2-2.6.33.tar.bz2
+| | | |-- iproute2-2.6.33.tar.bz2.sig
| | | |-- iproute2.SlackBuild
-| | | |-- iproute2.dbpath.diff.gz
-| | | |-- iproute2.iptablespath.diff.gz
| | | `-- slack-desc
| | |-- iptables
-| | | |-- iptables-1.4.3.2.tar.bz2
+| | | |-- iptables-1.4.7.tar.bz2
| | | |-- iptables.SlackBuild
| | | `-- slack-desc
| | |-- iptraf
@@ -6880,27 +7250,32 @@ see additional documentation files. | | | |-- iptraf_3.0.0-6.diff.gz
| | | `-- slack-desc
| | |-- iputils
-| | | |-- iputils-s20070202.tar.bz2
+| | | |-- iputils-s20100418.tar.bz2
| | | |-- iputils.SlackBuild
| | | `-- slack-desc
| | |-- ipw2100-fw
| | | |-- ipw2100-fw-1.3.tar.bz2
| | | `-- ipw2100-fw.SlackBuild
| | |-- ipw2200-fw
-| | | |-- ipw2200-fw-3.0.tar.bz2
+| | | |-- ipw2200-fw-3.1.tar.xz
| | | `-- ipw2200-fw.SlackBuild
| | |-- irssi
| | | |-- doinst.sh.gz
-| | | |-- irsi-0.8.14.manpage_fix.diff.gz
-| | | |-- irssi-0.8.14.tar.bz2
-| | | |-- irssi-0.8.14.tar.bz2.sig
+| | | |-- irssi-0.8.15.tar.bz2
+| | | |-- irssi-0.8.15.tar.bz2.sig
| | | |-- irssi.SlackBuild
+| | | |-- irssi.manpage_fix.diff.gz
+| | | |-- irssi.ssl_proxy.diff.gz
| | | `-- slack-desc
| | |-- iw
| | | |-- iw-0.9.14.tar.bz2
| | | |-- iw.SlackBuild
| | | |-- iw.info
| | | `-- slack-desc
+| | |-- iwlwifi-1000-ucode
+| | | |-- iwlwifi-1000-ucode-128.50.3.1.tar.xz
+| | | |-- iwlwifi-1000-ucode.SlackBuild
+| | | `-- slack-desc
| | |-- iwlwifi-3945-ucode
| | | |-- iwlwifi-3945-ucode-15.28.1.8.tar.bz2
| | | |-- iwlwifi-3945-ucode-15.32.2.9.tar.bz2
@@ -6920,18 +7295,23 @@ see additional documentation files. | | | |-- iwlwifi-5150-ucode-8.24.2.2.tar.bz2
| | | |-- iwlwifi-5150-ucode.SlackBuild
| | | `-- slack-desc
+| | |-- iwlwifi-6000-ucode
+| | | |-- iwlwifi-6000-ucode-9.193.4.1.tar.xz
+| | | |-- iwlwifi-6000-ucode.SlackBuild
+| | | `-- slack-desc
| | |-- lftp
| | | |-- doinst.sh.gz
-| | | |-- lftp-3.7.14.tar.bz2
+| | | |-- lftp-4.0.7.tar.bz2
| | | |-- lftp.SlackBuild
| | | `-- slack-desc
| | |-- libassuan
-| | | |-- libassuan-1.0.4.tar.bz2
-| | | |-- libassuan-1.0.4.tar.bz2.sig
+| | | |-- libassuan-1.0.5.tar.bz2
+| | | |-- libassuan-1.0.5.tar.bz2.sig
| | | |-- libassuan.SlackBuild
| | | `-- slack-desc
| | |-- libgcrypt
-| | | |-- libgcrypt-1.4.4.tar.bz2
+| | | |-- libgcrypt-1.4.5.tar.bz2
+| | | |-- libgcrypt-1.4.5.tar.bz2.sig
| | | |-- libgcrypt.SlackBuild
| | | `-- slack-desc
| | |-- libgpg-error
@@ -6939,18 +7319,19 @@ see additional documentation files. | | | |-- libgpg-error.SlackBuild
| | | `-- slack-desc
| | |-- libksba
-| | | |-- libksba-1.0.6.tar.bz2
+| | | |-- libksba-1.0.7.tar.bz2
+| | | |-- libksba-1.0.7.tar.bz2.sig
| | | |-- libksba.SlackBuild
| | | `-- slack-desc
| | |-- links
-| | | |-- links-2.2.tar.bz2
+| | | |-- links-2.3pre1.tar.bz2
| | | |-- links.SlackBuild
| | | `-- slack-desc
| | |-- lynx
| | | |-- lynx.SlackBuild
| | | |-- lynx.cfg.diff.gz
| | | |-- lynx.path.diff.gz
-| | | |-- lynx2.8.6rel.5.tar.bz2
+| | | |-- lynx2.8.7.tar.xz
| | | `-- slack-desc
| | |-- mailx
| | | |-- doinst.sh.gz
@@ -6958,7 +7339,7 @@ see additional documentation files. | | | |-- mailx.SlackBuild
| | | `-- slack-desc
| | |-- mcabber
-| | | |-- mcabber-0.9.9.tar.bz2
+| | | |-- mcabber-0.10.0.tar.bz2
| | | |-- mcabber.SlackBuild
| | | `-- slack-desc
| | |-- metamail
@@ -6968,8 +7349,7 @@ see additional documentation files. | | | |-- metamail_2.7-52.diff.xz
| | | `-- slack-desc
| | |-- mtr
-| | | |-- mtr-0.73.configure.error.diff.gz
-| | | |-- mtr-0.73.tar.bz2
+| | | |-- mtr-0.75.tar.xz
| | | |-- mtr.SlackBuild
| | | `-- slack-desc
| | |-- mutt
@@ -6984,12 +7364,12 @@ see additional documentation files. | | | |-- nc110.tgz
| | | `-- slack-desc
| | |-- ncftp
-| | | |-- ncftp-3.2.2-src.tar.bz2
+| | | |-- ncftp-3.2.4-src.tar.bz2
| | | |-- ncftp.SlackBuild
| | | `-- slack-desc
| | |-- net-snmp
| | | |-- doinst.sh.gz
-| | | |-- net-snmp-5.4.2.1.tar.bz2
+| | | |-- net-snmp-5.5.tar.xz
| | | |-- net-snmp.SlackBuild
| | | |-- rc.snmpd
| | | |-- slack-desc
@@ -7005,11 +7385,11 @@ see additional documentation files. | | |-- netatalk
| | | |-- afppasswd
| | | |-- doinst.sh.gz
-| | | |-- netatalk-2.0.4-afpdconf.diff.gz
-| | | |-- netatalk-2.0.4-without_xfs.diff.gz
-| | | |-- netatalk-2.0.4.tar.xz
+| | | |-- netatalk-2.0.5.tar.xz
| | | |-- netatalk.SlackBuild
+| | | |-- netatalk.afpdconf.diff.gz
| | | |-- netatalk.etc2ps.diff.gz
+| | | |-- netatalk.without_xfs.diff.gz
| | | |-- rc.atalk.new
| | | `-- slack-desc
| | |-- netdate
@@ -7111,20 +7491,21 @@ see additional documentation files. | | | `-- slack-desc
| | |-- nfs-utils
| | | |-- _nfs-utils.tar.gz
-| | | |-- nfs-utils-1.1.4.tar.bz2
-| | | |-- nfs-utils-1.1.4.tar.bz2.sign
+| | | |-- nfs-utils-1.2.2.tar.bz2
+| | | |-- nfs-utils-1.2.2.tar.bz2.sign
| | | |-- nfs-utils.SlackBuild
| | | |-- nfs-utils.lwrap.needs.lnsl.diff.gz
| | | |-- rc.nfsd
| | | `-- slack-desc
| | |-- nmap
-| | | |-- nmap-5.00.tar.xz
+| | | |-- nmap-5.21.tar.xz
| | | |-- nmap.SlackBuild
| | | |-- nmap.ndiff.mandir.diff.gz
| | | `-- slack-desc
| | |-- nn
| | | |-- NNTP.gz
| | | |-- doinst.sh.gz
+| | | |-- m-x86_64.h.gz
| | | |-- nn-6.7.3.tar.bz2
| | | |-- nn.SlackBuild
| | | |-- nn.badnntphost.diff.gz
@@ -7134,28 +7515,40 @@ see additional documentation files. | | | `-- slack-desc
| | |-- ntp
| | | |-- doinst.sh.gz
-| | | |-- ntp-4.2.4p7.tar.xz
+| | | |-- ntp-4.2.6p1.tar.xz
| | | |-- ntp.SlackBuild
| | | |-- ntp.conf
| | | |-- ntp.keys
+| | | |-- ntp.nano.diff.gz
| | | |-- rc.ntpd
| | | `-- slack-desc
+| | |-- obex-data-server
+| | | |-- doinst.sh.gz
+| | | |-- obex-data-server-0.4.5.tar.bz2
+| | | |-- obex-data-server.SlackBuild
+| | | `-- slack-desc
+| | |-- obexfs
+| | | |-- obexfs-0.12.tar.bz2
+| | | |-- obexfs.SlackBuild
+| | | `-- slack-desc
| | |-- obexftp
| | | |-- obexftp-0.23.tar.bz2
| | | |-- obexftp.SlackBuild
+| | | |-- ruby_rstringlen.diff.gz
| | | `-- slack-desc
| | |-- openldap-client
| | | |-- doinst.sh.gz
-| | | |-- openldap-2.3.43.tar.bz2
+| | | |-- openldap-2.4.21.tar.xz
| | | |-- openldap-client.SlackBuild
| | | `-- slack-desc
| | |-- openobex
-| | | |-- openobex-1.3.tar.bz2
+| | | |-- openobex-1.5.tar.bz2
| | | |-- openobex.SlackBuild
| | | `-- slack-desc
| | |-- openssh
| | | |-- doinst.sh.gz
-| | | |-- openssh-5.2p1.tar.bz2
+| | | |-- openssh-5.5p1.tar.gz
+| | | |-- openssh-5.5p1.tar.gz.asc
| | | |-- openssh.SlackBuild
| | | |-- rc.sshd
| | | `-- slack-desc
@@ -7163,29 +7556,27 @@ see additional documentation files. | | | |-- certwatch.gz
| | | |-- doinst.sh-openssl-solibs.gz
| | | |-- doinst.sh-openssl.gz
-| | | |-- openssl-0.9.8k.tar.bz2
+| | | |-- openssl-0.9.8n.tar.xz
| | | |-- openssl.SlackBuild
-| | | |-- openssl.no-extssl.diff.gz
| | | |-- openssl.optsx86.diff.gz
| | | |-- openssl.soname.diff.gz
| | | |-- slack-desc.openssl
| | | `-- slack-desc.openssl-solibs
| | |-- openvpn
| | | |-- README
-| | | |-- openvpn-2.0.9.tar.gz
-| | | |-- openvpn-2.0.9.tar.gz.asc
+| | | |-- openvpn-2.1.1.tar.gz
+| | | |-- openvpn-2.1.1.tar.gz.asc
| | | |-- openvpn.SlackBuild
| | | |-- openvpn.conf.sample
| | | `-- slack-desc
| | |-- php
-| | | |-- channels
-| | | | |-- pear.php.net.reg
-| | | | `-- pecl.php.net.reg
| | | |-- doinst.sh.gz
| | | |-- mod_php.conf.example
| | | |-- pear
-| | | |-- php-5.2.10.tar.bz2
+| | | |-- php-5.2.13.tar.xz
| | | |-- php.SlackBuild
+| | | |-- php.gd_libpng-1.4.diff.gz
+| | | |-- php.gmp5.diff.gz
| | | |-- php.ini.diff.gz
| | | |-- php.recommended.ini.diff.gz
| | | `-- slack-desc
@@ -7197,7 +7588,7 @@ see additional documentation files. | | | |-- pidentd.conf.diff.gz
| | | `-- slack-desc
| | |-- pinentry
-| | | |-- pinentry-0.7.6.tar.bz2
+| | | |-- pinentry-0.8.0.tar.xz
| | | |-- pinentry.SlackBuild
| | | `-- slack-desc
| | |-- popa3d
@@ -7217,7 +7608,7 @@ see additional documentation files. | | |-- ppp
| | | |-- doinst.sh.gz
| | | |-- options.new.gz
-| | | |-- ppp-2.4.4.tar.bz2
+| | | |-- ppp-2.4.5.tar.bz2
| | | |-- ppp.SlackBuild
| | | |-- ppp.slack.diff.gz
| | | |-- pppsetup-1.98.backupfiles.diff.gz
@@ -7239,17 +7630,15 @@ see additional documentation files. | | | |-- procmail_3.22-5.diff.gz
| | | `-- slack-desc
| | |-- proftpd
-| | | |-- _proftpd.tar.gz
| | | |-- doinst.sh.gz
| | | |-- etc
| | | | |-- ftpusers
| | | | `-- proftpd.conf
-| | | |-- proftpd-1.3.2.tar.bz2
-| | | |-- proftpd-1.3.2.tar.bz2.asc
+| | | |-- proftpd-1.3.3.tar.xz
| | | |-- proftpd.SlackBuild
| | | `-- slack-desc
| | |-- pssh
-| | | |-- pssh-1.3.1.tar.gz
+| | | |-- pssh-2.1.1.tar.gz
| | | |-- pssh.SlackBuild
| | | `-- slack-desc
| | |-- pth
@@ -7257,12 +7646,21 @@ see additional documentation files. | | | |-- pth.SlackBuild
| | | `-- slack-desc
| | |-- rdist
-| | | |-- _rdist.tar.gz
-| | | |-- rdist-6.1.5-bison.diff.gz
-| | | |-- rdist-6.1.5-cleanup.diff.gz
-| | | |-- rdist-6.1.5-varargs.diff.gz
-| | | |-- rdist-6.1.5.diff.gz
+| | | |-- rdist-6.1.5-00.linux.diff.gz
+| | | |-- rdist-6.1.5-01.links.diff.gz
+| | | |-- rdist-6.1.5-03.hardlink.diff.gz
+| | | |-- rdist-6.1.5-04.bison.diff.gz
+| | | |-- rdist-6.1.5-05.varargs.diff.gz
+| | | |-- rdist-6.1.5-06.maxargs.diff.gz
+| | | |-- rdist-6.1.5-07.lfs.diff.gz
+| | | |-- rdist-6.1.5-08.cleanup.diff.gz
+| | | |-- rdist-6.1.5-09.svr4.diff.gz
+| | | |-- rdist-6.1.5-10.ssh.diff.gz
+| | | |-- rdist-6.1.5-11.mkstemp.diff.gz
+| | | |-- rdist-6.1.5-12.stat64.diff.gz
+| | | |-- rdist-6.1.5-14.fix-msgsndnotify-loop.diff.gz
| | | |-- rdist-6.1.5.tar.gz
+| | | |-- rdist-eu-license.txt
| | | |-- rdist.SlackBuild
| | | `-- slack-desc
| | |-- rp-pppoe
@@ -7271,9 +7669,17 @@ see additional documentation files. | | | |-- rp-pppoe.SlackBuild
| | | `-- slack-desc
| | |-- rsync
-| | | |-- rsync-3.0.6.tar.xz
+| | | |-- rsync-3.0.7.tar.xz
| | | |-- rsync.SlackBuild
| | | `-- slack-desc
+| | |-- rt2860-firmware
+| | | |-- RT2860_Firmware_V26.zip
+| | | |-- rt2860-firmware.SlackBuild
+| | | `-- slack-desc
+| | |-- rt2870-firmware
+| | | |-- RT2870_Firmware_V22.zip
+| | | |-- rt2870-firmware.SlackBuild
+| | | `-- slack-desc
| | |-- rt61-firmware
| | | |-- RT61_Firmware_V1.2.zip
| | | |-- rt61-firmware.SlackBuild
@@ -7285,7 +7691,7 @@ see additional documentation files. | | |-- samba
| | | |-- doinst.sh.gz
| | | |-- rc.samba
-| | | |-- samba-3.2.13.tar.xz
+| | | |-- samba-3.5.2.tar.xz
| | | |-- samba.SlackBuild
| | | |-- slack-desc
| | | |-- smb.conf.default
@@ -7301,8 +7707,8 @@ see additional documentation files. | | | |-- sendmail-slackware-tls-sasl.mc
| | | |-- sendmail-slackware-tls.mc
| | | |-- sendmail-slackware.mc
-| | | |-- sendmail.8.14.3.tar.gz
-| | | |-- sendmail.8.14.3.tar.gz.sig
+| | | |-- sendmail.8.14.4.tar.gz
+| | | |-- sendmail.8.14.4.tar.gz.sig
| | | |-- site.config.m4
| | | |-- slack-desc.sendmail
| | | `-- slack-desc.sendmail-cf
@@ -7313,15 +7719,15 @@ see additional documentation files. | | | `-- slrn.SlackBuild
| | |-- snownews
| | | |-- slack-desc
-| | | |-- snownews-1.5.11.tar.gz
-| | | |-- snownews-1.5.11.tar.gz.asc
+| | | |-- snownews-1.5.12.tar.gz
+| | | |-- snownews-1.5.12.tar.gz.asc
| | | `-- snownews.SlackBuild
| | |-- stunnel
| | | |-- doinst.sh.gz
| | | |-- generate-stunnel-key.sh
| | | |-- slack-desc
-| | | |-- stunnel-4.17.tar.gz
-| | | |-- stunnel-4.17.tar.gz.asc
+| | | |-- stunnel-4.33.tar.gz
+| | | |-- stunnel-4.33.tar.gz.asc
| | | `-- stunnel.SlackBuild
| | |-- tcp_wrappers
| | | |-- slack-desc
@@ -7330,6 +7736,7 @@ see additional documentation files. | | |-- tcpdump
| | | |-- libpcap-1.0.0.tar.gz
| | | |-- libpcap-1.0.0.tar.gz.sig
+| | | |-- libpcap.20-fix-any-intf.diff.gz
| | | |-- slack-desc
| | | |-- tcpdump-4.0.0.tar.gz
| | | |-- tcpdump-4.0.0.tar.gz.sig
@@ -7345,8 +7752,8 @@ see additional documentation files. | | | `-- telnet.SlackBuild
| | |-- tftp-hpa
| | | |-- slack-desc
-| | | |-- tftp-hpa-0.48.tar.bz2
-| | | |-- tftp-hpa-0.48.tar.bz2.sign
+| | | |-- tftp-hpa-0.49.tar.bz2
+| | | |-- tftp-hpa-0.49.tar.bz2.sign
| | | `-- tftp-hpa.SlackBuild
| | |-- tin
| | | |-- slack-desc
@@ -7355,10 +7762,8 @@ see additional documentation files. | | | `-- tin.SlackBuild
| | |-- traceroute
| | | |-- slack-desc
-| | | |-- traceroute-1.4a12.tar.gz
-| | | |-- traceroute.SlackBuild
-| | | |-- traceroute.no.domain.strip.diff.gz
-| | | `-- traceroute_1.4a12-5.diff.gz
+| | | |-- traceroute-2.0.14.tar.gz
+| | | `-- traceroute.SlackBuild
| | |-- trn
| | | |-- _trn.tar.gz
| | | |-- config.sh.gz
@@ -7379,21 +7784,20 @@ see additional documentation files. | | |-- vsftpd
| | | |-- doinst.sh.gz
| | | |-- slack-desc
-| | | |-- vsftpd-2.1.2.tar.xz
+| | | |-- vsftpd-2.2.2.tar.gz
| | | |-- vsftpd.SlackBuild
| | | |-- vsftpd.builddefs.diff.gz
| | | |-- vsftpd.conf.diff.gz
-| | | |-- vsftpd.log.gz
-| | | `-- vsftpd.vsf_findlibs.sh.diff.gz
+| | | `-- vsftpd.log.gz
| | |-- wget
| | | |-- doinst.sh.gz
| | | |-- slack-desc
-| | | |-- wget-1.11.4.tar.bz2
+| | | |-- wget-1.12.tar.xz
| | | `-- wget.SlackBuild
| | |-- whois
| | | |-- slack-desc
| | | |-- whois.SlackBuild
-| | | `-- whois_4.7.26.tar.gz
+| | | `-- whois_5.0.2.tar.gz
| | |-- wireless-tools
| | | |-- doinst.sh.gz
| | | |-- scripts
@@ -7408,19 +7812,19 @@ see additional documentation files. | | | |-- README.slackware
| | | |-- slack-desc
| | | |-- wpa_gui.png
-| | | |-- wpa_supplicant-0.6.9.tar.bz2
+| | | |-- wpa_supplicant-0.6.10.tar.xz
| | | |-- wpa_supplicant.SlackBuild
| | | `-- wpa_supplicant.defconfig
| | |-- yptools
| | | |-- nsswitch.conf-nis.gz
| | | |-- rc.yp.gz
| | | |-- slack-desc
-| | | |-- yp-tools-2.9.tar.bz2
-| | | |-- yp-tools-2.9.tar.bz2.sign
-| | | |-- ypbind-mt-1.19.1.tar.bz2
-| | | |-- ypbind-mt-1.19.1.tar.bz2.sign
-| | | |-- ypserv-2.18.tar.bz2
-| | | |-- ypserv-2.18.tar.bz2.sign
+| | | |-- yp-tools-2.12.tar.bz2
+| | | |-- yp-tools-2.12.tar.bz2.sign
+| | | |-- ypbind-mt-1.31.tar.bz2
+| | | |-- ypbind-mt-1.31.tar.bz2.sign
+| | | |-- ypserv-2.23.tar.bz2
+| | | |-- ypserv-2.23.tar.bz2.sign
| | | `-- yptools.SlackBuild
| | |-- ytalk
| | | |-- doinst.sh.gz
@@ -7444,11 +7848,15 @@ see additional documentation files. | | | |-- tetex-texmfsrc-3.0.tar.xz
| | | |-- tetex.CVE-2005-3193.diff.gz
| | | |-- tetex.SlackBuild
+| | | |-- tetex.afm2tfm.getline.diff.gz
| | | |-- tetex.amstex.fmtutil.diff.gz
| | | |-- tetex.browsers.diff.gz
+| | | |-- tetex.cpascal.getline.posix.2008.diff.gz
| | | |-- tetex.dvipdfm.mkstemp.diff.gz
| | | |-- tetex.etex.diff.gz
| | | |-- tetex.fontcachedirinhome.diff.gz
+| | | |-- tetex.leet.diff.gz
+| | | |-- tetex.png14.diff.gz
| | | |-- tetex.scripts.mktemp.diff.gz
| | | |-- tetex.tmp.cleanup.diff.gz
| | | `-- tetex.var.fonts.diff.gz
@@ -7457,7 +7865,8 @@ see additional documentation files. | | | |-- transfig.3.2.4-gcc4.patch.gz
| | | |-- transfig.3.2.4.tar.gz
| | | |-- transfig.SlackBuild
-| | | `-- transfig.diff.gz
+| | | |-- transfig.diff.gz
+| | | `-- transfig.png14.nodither.diff.gz
| | `-- xfig
| | |-- slack-desc
| | |-- xfig-3.2.4-mkstemp.diff.gz
@@ -7475,7 +7884,8 @@ see additional documentation files. | | |-- xfig.docs.location.diff.gz
| | |-- xfig.fig.ad.diff.gz
| | |-- xfig.no.pdf.ref.diff.gz
-| | `-- xfig.no.xfig_ref_en.pdf.diff.gz
+| | |-- xfig.no.xfig_ref_en.pdf.diff.gz
+| | `-- xfig.png14.nodither.diff.gz
| |-- tcl
| | |-- expect
| | | |-- expect-5.44.1.11.tar.bz2
@@ -7491,7 +7901,7 @@ see additional documentation files. | | |-- tcl
| | | |-- slack-desc
| | | |-- tcl.SlackBuild
-| | | `-- tcl8.5.7-src.tar.xz
+| | | `-- tcl8.5.8-src.tar.xz
| | |-- tclx
| | | |-- slack-desc
| | | |-- tclx-8.4.configure.diff.gz
@@ -7507,19 +7917,20 @@ see additional documentation files. | | `-- tk
| | |-- slack-desc
| | |-- tk.SlackBuild
-| | `-- tk8.5.7-src.tar.xz
+| | `-- tk8.5.8-src.tar.xz
| |-- x
| | |-- anthy
| | | |-- anthy-9100e.tar.gz
| | | |-- anthy.SlackBuild
| | | `-- slack-desc
| | |-- dejavu-fonts-ttf
-| | | |-- dejavu-fonts-ttf-2.29.tar.bz2
+| | | |-- dejavu-fonts-ttf-2.30.tar.bz2
| | | |-- dejavu-fonts-ttf.SlackBuild
| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- fontconfig
-| | | |-- fontconfig-2.6.0.tar.bz2
+| | | |-- doinst.sh.gz
+| | | |-- fontconfig-2.8.0.tar.xz
| | | |-- fontconfig.SlackBuild
| | | |-- fontconfig.dejavu.diff.gz
| | | |-- fontconfig.font.dir.list.diff.gz
@@ -7531,8 +7942,9 @@ see additional documentation files. | | | |-- glew.url
| | | `-- slack-desc
| | |-- libdrm
-| | | |-- libdrm-2.4.12.tar.xz
+| | | |-- libdrm-2.4.20.tar.xz
| | | |-- libdrm.SlackBuild
+| | | |-- libdrm.uint32_t.diff.gz
| | | `-- slack-desc
| | |-- liberation-fonts-ttf
| | | |-- 60-liberation.conf
@@ -7553,12 +7965,13 @@ see additional documentation files. | | | |-- m17n-lib.SlackBuild
| | | `-- slack-desc
| | |-- mesa
-| | | |-- MesaDemos-7.5.tar.xz
-| | | |-- MesaGLUT-7.5.tar.xz
-| | | |-- MesaLib-7.5.tar.xz
+| | | |-- MesaDemos-7.8.1.tar.xz
+| | | |-- MesaGLUT-7.8.1.tar.xz
+| | | |-- MesaLib-7.8.1.tar.xz
| | | |-- README.GIT
| | | |-- get-mesa.sh
| | | |-- mesa.SlackBuild
+| | | |-- mesa.url
| | | `-- slack-desc
| | |-- sazanami-fonts-ttf
| | | |-- sazanami-20040629.tar.bz2
@@ -7625,196 +8038,75 @@ see additional documentation files. | | |-- x11
| | | |-- arch.use.flags
| | | |-- build
-| | | | |-- appres
-| | | | |-- bdftopcf
-| | | | |-- bigreqsproto
-| | | | |-- bitmap
-| | | | |-- compiz
-| | | | |-- compositeproto
-| | | | |-- damageproto
-| | | | |-- dmxproto
-| | | | |-- editres
-| | | | |-- encodings
-| | | | |-- evieext
-| | | | |-- fixesproto
-| | | | |-- font-adobe-100dpi
-| | | | |-- font-adobe-75dpi
-| | | | |-- font-adobe-utopia-100dpi
-| | | | |-- font-adobe-utopia-75dpi
-| | | | |-- font-adobe-utopia-type1
-| | | | |-- font-alias
-| | | | |-- font-arabic-misc
-| | | | |-- font-bh-100dpi
-| | | | |-- font-bh-75dpi
-| | | | |-- font-bh-lucidatypewriter-100dpi
-| | | | |-- font-bh-lucidatypewriter-75dpi
-| | | | |-- font-bh-ttf
-| | | | |-- font-bh-type1
-| | | | |-- font-bitstream-100dpi
-| | | | |-- font-bitstream-75dpi
-| | | | |-- font-bitstream-speedo
-| | | | |-- font-bitstream-type1
-| | | | |-- font-cronyx-cyrillic
-| | | | |-- font-cursor-misc
-| | | | |-- font-daewoo-misc
-| | | | |-- font-dec-misc
-| | | | |-- font-ibm-type1
-| | | | |-- font-isas-misc
-| | | | |-- font-jis-misc
-| | | | |-- font-micro-misc
-| | | | |-- font-misc-cyrillic
-| | | | |-- font-misc-ethiopic
-| | | | |-- font-misc-meltho
-| | | | |-- font-misc-misc
-| | | | |-- font-mutt-misc
-| | | | |-- font-schumacher-misc
-| | | | |-- font-screen-cyrillic
-| | | | |-- font-sony-misc
-| | | | |-- font-sun-misc
-| | | | |-- font-util
-| | | | |-- font-winitzki-cyrillic
-| | | | |-- font-xfree86-type1
-| | | | |-- fontcacheproto
-| | | | |-- fontsproto
| | | | |-- gccmakedep
-| | | | |-- iceauth
| | | | |-- ico
-| | | | |-- imake
-| | | | |-- kbproto
-| | | | |-- lbxproxy
-| | | | |-- libICE
-| | | | |-- libXScrnSaver
| | | | |-- libXTrap
-| | | | |-- libXau
-| | | | |-- libXcomposite
-| | | | |-- libXcursor
-| | | | |-- libXdamage
-| | | | |-- libXdmcp
| | | | |-- libXevie
-| | | | |-- libXfixes
-| | | | |-- libXfontcache
-| | | | |-- libXft
-| | | | |-- libXinerama
-| | | | |-- libXmu
| | | | |-- libXp
-| | | | |-- libXpm
| | | | |-- libXprintAppUtil
| | | | |-- libXprintUtil
-| | | | |-- libXrender
-| | | | |-- libXres
-| | | | |-- libXtst
-| | | | |-- libXv
-| | | | |-- libXvMC
-| | | | |-- libXxf86dga
-| | | | |-- libXxf86misc
-| | | | |-- libXxf86vm
-| | | | |-- libdmx
-| | | | |-- libfontenc
-| | | | |-- liblbxutil
-| | | | |-- libpthread-stubs
-| | | | |-- libxkbfile
| | | | |-- libxkbui
-| | | | |-- listres
| | | | |-- lndir
-| | | | |-- luit
-| | | | |-- makedepend
-| | | | |-- mkcomposecache
-| | | | |-- mkfontdir
| | | | |-- oclock
| | | | |-- printproto
| | | | |-- proxymngr
-| | | | |-- recordproto
| | | | |-- rendercheck
-| | | | |-- resourceproto
| | | | |-- scripts
-| | | | |-- scrnsaverproto
-| | | | |-- smproxy
| | | | |-- trapproto
| | | | |-- twm
-| | | | |-- videoproto
-| | | | |-- viewres
-| | | | |-- x11perf
-| | | | |-- xauth
-| | | | |-- xbacklight
-| | | | |-- xbiff
-| | | | |-- xbitmaps
-| | | | |-- xcalc
-| | | | |-- xclipboard
-| | | | |-- xclock
-| | | | |-- xcmiscproto
-| | | | |-- xcmsdb
-| | | | |-- xcompmgr
| | | | |-- xconsole
-| | | | |-- xcursor-themes
-| | | | |-- xcursorgen
| | | | |-- xdbedizzy
| | | | |-- xditview
-| | | | |-- xdriinfo
-| | | | |-- xev
-| | | | |-- xeyes
| | | | |-- xf86-input-elographics
| | | | |-- xf86-input-mutouch
-| | | | |-- xf86-video-ati
-| | | | |-- xf86-video-nsc
-| | | | |-- xf86-video-openchrome
+| | | | |-- xf86-input-vmmouse
+| | | | |-- xf86-video-apm
+| | | | |-- xf86-video-ast
+| | | | |-- xf86-video-cirrus
+| | | | |-- xf86-video-glint
+| | | | |-- xf86-video-i128
+| | | | |-- xf86-video-i740
+| | | | |-- xf86-video-mach64
+| | | | |-- xf86-video-mga
+| | | | |-- xf86-video-neomagic
+| | | | |-- xf86-video-r128
+| | | | |-- xf86-video-s3
+| | | | |-- xf86-video-s3virge
+| | | | |-- xf86-video-savage
+| | | | |-- xf86-video-sis
+| | | | |-- xf86-video-sisusb
+| | | | |-- xf86-video-tdfx
| | | | |-- xf86-video-v4l
-| | | | |-- xf86bigfontproto
+| | | | |-- xf86-video-vesa
+| | | | |-- xf86-video-vmware
+| | | | |-- xf86-video-voodoo
| | | | |-- xf86dga
-| | | | |-- xf86dgaproto
-| | | | |-- xf86driproto
-| | | | |-- xf86miscproto
| | | | |-- xf86rushproto
-| | | | |-- xf86vidmodeproto
| | | | |-- xfd
| | | | |-- xfindproxy
| | | | |-- xfontsel
| | | | |-- xfwp
-| | | | |-- xgamma
| | | | |-- xgc
-| | | | |-- xhost
-| | | | |-- xineramaproto
-| | | | |-- xkbevd
-| | | | |-- xkbprint
-| | | | |-- xkbutils
-| | | | |-- xkill
| | | | |-- xload
-| | | | |-- xlogo
-| | | | |-- xlsatoms
-| | | | |-- xlsclients
| | | | |-- xlsfonts
-| | | | |-- xmag
-| | | | |-- xman
-| | | | |-- xmessage
| | | | |-- xmh
-| | | | |-- xmodmap
| | | | |-- xmore
-| | | | |-- xorg-cf-files
-| | | | |-- xorg-docs
-| | | | |-- xorg-sgml-doctools
| | | | |-- xplsprinters
-| | | | |-- xpr
| | | | |-- xprehashprinterlist
-| | | | |-- xprop
-| | | | |-- xproxymanagementprotocol
-| | | | |-- xrdb
-| | | | |-- xrefresh
-| | | | |-- xset
| | | | |-- xsetmode
| | | | |-- xsetpointer
-| | | | |-- xsetroot
| | | | |-- xsm
| | | | |-- xstdcmap
-| | | | |-- xtrap
-| | | | |-- xvidtune
-| | | | |-- xvinfo
-| | | | `-- xwud
+| | | | `-- xtrap
| | | |-- configure
| | | | |-- compiz
| | | | |-- configure
+| | | | |-- font-util
| | | | |-- libX11
| | | | |-- libXt
| | | | |-- pixman
| | | | |-- setxkbmap
+| | | | |-- xf86-input-vmmouse
| | | | |-- xf86-video-ati
| | | | |-- xf86-video-nv
| | | | |-- xfs
@@ -7869,17 +8161,16 @@ see additional documentation files. | | | |-- noarch
| | | |-- package-blacklist
| | | |-- patch
-| | | | |-- compiz
-| | | | | |-- compiz-0.7.8-kde42-crash.patch.gz
-| | | | | |-- compiz-0.7.8-kde42-krunner.patch.gz
-| | | | | `-- compiz-0.7.8-kde42.patch.gz
-| | | | |-- compiz.patch
+| | | | |-- xcursorgen
+| | | | | `-- xcursorgen.png14.configure.kludge.diff.gz
+| | | | |-- xcursorgen.patch
+| | | | |-- xf86-input-synaptics
+| | | | | `-- xf86-input-synaptics.tap-to-click.diff.gz
+| | | | |-- xf86-input-synaptics.patch
| | | | |-- xorg-server
-| | | | | `-- x11.startwithblackscreen.diff.gz
-| | | | |-- xorg-server.patch
-| | | | |-- xscope
-| | | | | `-- xscope-1.1-scope.c.diff.gz
-| | | | `-- xscope.patch
+| | | | | |-- x11.startwithblackscreen.diff.gz
+| | | | | `-- xorg-server.fb.fbpict.c.mod.diff.gz
+| | | | `-- xorg-server.patch
| | | |-- post-install
| | | | |-- beforelight.post-install
| | | | |-- encodings.post-install
@@ -7933,6 +8224,7 @@ see additional documentation files. | | | | |-- twm
| | | | | `-- xinitrc.twm
| | | | |-- twm.post-install
+| | | | |-- util-macros.post-install
| | | | |-- x11-app-test.post-install
| | | | |-- x11-font.post-install
| | | | |-- x11-util.post-install
@@ -7945,6 +8237,7 @@ see additional documentation files. | | | | |-- xdm.post-install
| | | | |-- xf86-input-joystick.post-install
| | | | |-- xf86-input-synaptics.post-install
+| | | | |-- xf86-input-wacom.post-install
| | | | |-- xfs.post-install
| | | | |-- xinit
| | | | | `-- README.Xmodmap
@@ -8163,6 +8456,7 @@ see additional documentation files. | | | | |-- xf86-input-ur98
| | | | |-- xf86-input-vmmouse
| | | | |-- xf86-input-void
+| | | | |-- xf86-input-wacom
| | | | |-- xf86-video-apm
| | | | |-- xf86-video-ark
| | | | |-- xf86-video-ast
@@ -8215,6 +8509,8 @@ see additional documentation files. | | | | |-- xf86-video-vmware
| | | | |-- xf86-video-voodoo
| | | | |-- xf86-video-wsfb
+| | | | |-- xf86-video-xgi
+| | | | |-- xf86-video-xgixp
| | | | |-- xf86bigfontproto
| | | | |-- xf86dga
| | | | |-- xf86dgaproto
@@ -8288,57 +8584,55 @@ see additional documentation files. | | | | `-- xwud
| | | |-- src
| | | | |-- app
-| | | | | |-- appres-1.0.1.tar.xz
-| | | | | |-- bdftopcf-1.0.1.tar.xz
+| | | | | |-- appres-1.0.2.tar.xz
+| | | | | |-- bdftopcf-1.0.2.tar.xz
| | | | | |-- beforelight-1.0.3.tar.xz
-| | | | | |-- bitmap-1.0.3.tar.xz
-| | | | | |-- compiz-0.7.8.tar.xz
-| | | | | |-- constype-1.0.1.tar.xz
-| | | | | |-- editres-1.0.3.tar.xz
+| | | | | |-- bitmap-1.0.4.tar.xz
+| | | | | |-- compiz-0.8.6.tar.xz
+| | | | | |-- editres-1.0.4.tar.xz
| | | | | |-- fonttosfnt-1.0.4.tar.xz
| | | | | |-- fslsfonts-1.0.2.tar.xz
| | | | | |-- fstobdf-1.0.3.tar.xz
-| | | | | |-- iceauth-1.0.2.tar.xz
+| | | | | |-- iceauth-1.0.3.tar.xz
| | | | | |-- ico-1.0.2.tar.xz
-| | | | | |-- intel-gpu-tools-1.0.1.tar.xz
-| | | | | |-- lbxproxy-1.0.1.tar.xz
-| | | | | |-- listres-1.0.1.tar.xz
-| | | | | |-- luit-1.0.3.tar.xz
+| | | | | |-- intel-gpu-tools-1.0.2.tar.xz
+| | | | | |-- listres-1.0.2.tar.xz
+| | | | | |-- luit-1.0.5.tar.xz
| | | | | |-- mkcfm-1.0.1.tar.xz
-| | | | | |-- mkcomposecache-1.2.tar.xz
-| | | | | |-- mkfontdir-1.0.4.tar.xz
-| | | | | |-- mkfontscale-1.0.6.tar.xz
+| | | | | |-- mkcomposecache-1.2.1.tar.xz
+| | | | | |-- mkfontdir-1.0.5.tar.xz
+| | | | | |-- mkfontscale-1.0.7.tar.xz
| | | | | |-- oclock-1.0.1.tar.xz
| | | | | |-- proxymngr-1.0.1.tar.xz
| | | | | |-- rendercheck-1.3.tar.xz
| | | | | |-- rgb-1.0.3.tar.xz
| | | | | |-- rstart-1.0.3.tar.xz
| | | | | |-- scripts-1.0.1.tar.xz
-| | | | | |-- sessreg-1.0.4.tar.xz
+| | | | | |-- sessreg-1.0.5.tar.xz
| | | | | |-- setxkbmap-1.1.0.tar.xz
| | | | | |-- showfont-1.0.2.tar.xz
-| | | | | |-- smproxy-1.0.2.tar.xz
+| | | | | |-- smproxy-1.0.3.tar.xz
| | | | | |-- twm-1.0.4.tar.xz
-| | | | | |-- viewres-1.0.1.tar.xz
-| | | | | |-- x11perf-1.5.tar.xz
-| | | | | |-- xauth-1.0.3.tar.xz
-| | | | | |-- xbacklight-1.1.tar.xz
-| | | | | |-- xbiff-1.0.1.tar.xz
-| | | | | |-- xcalc-1.0.2.tar.xz
-| | | | | |-- xclipboard-1.0.1.tar.xz
-| | | | | |-- xclock-1.0.3.tar.xz
-| | | | | |-- xcmsdb-1.0.1.tar.xz
-| | | | | |-- xcompmgr-1.1.4.tar.xz
+| | | | | |-- viewres-1.0.2.tar.xz
+| | | | | |-- x11perf-1.5.1.tar.xz
+| | | | | |-- xauth-1.0.4.tar.xz
+| | | | | |-- xbacklight-1.1.1.tar.xz
+| | | | | |-- xbiff-1.0.2.tar.xz
+| | | | | |-- xcalc-1.0.3.tar.xz
+| | | | | |-- xclipboard-1.1.0.tar.xz
+| | | | | |-- xclock-1.0.4.tar.xz
+| | | | | |-- xcmsdb-1.0.2.tar.xz
+| | | | | |-- xcompmgr-1.1.5.tar.xz
| | | | | |-- xconsole-1.0.3.tar.xz
-| | | | | |-- xcursorgen-1.0.2.tar.xz
+| | | | | |-- xcursorgen-1.0.3.tar.xz
| | | | | |-- xdbedizzy-1.0.2.tar.xz
| | | | | |-- xditview-1.0.1.tar.xz
-| | | | | |-- xdm-1.1.8.tar.xz
-| | | | | |-- xdpyinfo-1.0.3.tar.xz
-| | | | | |-- xdriinfo-1.0.2.tar.xz
+| | | | | |-- xdm-1.1.10.tar.xz
+| | | | | |-- xdpyinfo-1.1.0.tar.xz
+| | | | | |-- xdriinfo-1.0.3.tar.xz
| | | | | |-- xedit-1.1.2.tar.xz
-| | | | | |-- xev-1.0.3.tar.xz
-| | | | | |-- xeyes-1.0.1.tar.xz
+| | | | | |-- xev-1.0.4.tar.xz
+| | | | | |-- xeyes-1.1.0.tar.xz
| | | | | |-- xf86dga-1.0.2.tar.xz
| | | | | |-- xfd-1.0.1.tar.xz
| | | | | |-- xfindproxy-1.0.1.tar.xz
@@ -8346,58 +8640,58 @@ see additional documentation files. | | | | | |-- xfs-1.1.0.tar.xz
| | | | | |-- xfsinfo-1.0.2.tar.xz
| | | | | |-- xfwp-1.0.1.tar.xz
-| | | | | |-- xgamma-1.0.2.tar.xz
-| | | | | |-- xgc-1.0.1.tar.xz
-| | | | | |-- xhost-1.0.2.tar.xz
-| | | | | |-- xinit-1.1.1.tar.xz
-| | | | | |-- xinput-1.4.2.tar.xz
-| | | | | |-- xkbcomp-1.1.0.tar.xz
-| | | | | |-- xkbevd-1.0.2.tar.xz
-| | | | | |-- xkbprint-1.0.1.tar.xz
-| | | | | |-- xkbutils-1.0.1.tar.xz
-| | | | | |-- xkill-1.0.1.tar.xz
+| | | | | |-- xgamma-1.0.3.tar.xz
+| | | | | |-- xgc-1.0.2.tar.xz
+| | | | | |-- xhost-1.0.3.tar.xz
+| | | | | |-- xinit-1.2.1.tar.xz
+| | | | | |-- xinput-1.5.1.tar.xz
+| | | | | |-- xkbcomp-1.1.1.tar.xz
+| | | | | |-- xkbevd-1.1.0.tar.xz
+| | | | | |-- xkbprint-1.0.2.tar.xz
+| | | | | |-- xkbutils-1.0.2.tar.xz
+| | | | | |-- xkill-1.0.2.tar.xz
| | | | | |-- xload-1.0.2.tar.xz
-| | | | | |-- xlogo-1.0.1.tar.xz
-| | | | | |-- xlsatoms-1.0.1.tar.xz
-| | | | | |-- xlsclients-1.0.1.tar.xz
+| | | | | |-- xlogo-1.0.2.tar.xz
+| | | | | |-- xlsatoms-1.0.2.tar.xz
+| | | | | |-- xlsclients-1.0.2.tar.xz
| | | | | |-- xlsfonts-1.0.2.tar.xz
-| | | | | |-- xmag-1.0.2.tar.xz
-| | | | | |-- xman-1.0.3.tar.xz
-| | | | | |-- xmessage-1.0.2.tar.xz
+| | | | | |-- xmag-1.0.3.tar.xz
+| | | | | |-- xman-1.1.0.tar.xz
+| | | | | |-- xmessage-1.0.3.tar.xz
| | | | | |-- xmh-1.0.1.tar.xz
-| | | | | |-- xmodmap-1.0.3.tar.xz
+| | | | | |-- xmodmap-1.0.4.tar.xz
| | | | | |-- xmore-1.0.1.tar.xz
| | | | | |-- xphelloworld-1.0.1.tar.xz
| | | | | |-- xplsprinters-1.0.1.tar.xz
-| | | | | |-- xpr-1.0.2.tar.xz
+| | | | | |-- xpr-1.0.3.tar.xz
| | | | | |-- xprehashprinterlist-1.0.1.tar.xz
-| | | | | |-- xprop-1.0.4.tar.xz
-| | | | | |-- xrandr-1.3.0.tar.xz
-| | | | | |-- xrdb-1.0.5.tar.xz
-| | | | | |-- xrefresh-1.0.2.tar.xz
-| | | | | |-- xscope-1.1.tar.xz
-| | | | | |-- xset-1.0.4.tar.xz
+| | | | | |-- xprop-1.1.0.tar.xz
+| | | | | |-- xrandr-1.3.2.tar.xz
+| | | | | |-- xrdb-1.0.6.tar.xz
+| | | | | |-- xrefresh-1.0.3.tar.xz
+| | | | | |-- xscope-1.2.tar.xz
+| | | | | |-- xset-1.1.0.tar.xz
| | | | | |-- xsetmode-1.0.0.tar.xz
| | | | | |-- xsetpointer-1.0.1.tar.xz
-| | | | | |-- xsetroot-1.0.2.tar.xz
+| | | | | |-- xsetroot-1.0.3.tar.xz
| | | | | |-- xsm-1.0.1.tar.xz
| | | | | |-- xstdcmap-1.0.1.tar.xz
| | | | | |-- xtrap-1.0.2.tar.xz
-| | | | | |-- xvidtune-1.0.1.tar.xz
-| | | | | |-- xvinfo-1.0.2.tar.xz
-| | | | | |-- xwd-1.0.2.tar.xz
-| | | | | |-- xwininfo-1.0.4.tar.xz
-| | | | | `-- xwud-1.0.1.tar.xz
+| | | | | |-- xvidtune-1.0.2.tar.xz
+| | | | | |-- xvinfo-1.1.0.tar.xz
+| | | | | |-- xwd-1.0.3.tar.xz
+| | | | | |-- xwininfo-1.0.5.tar.xz
+| | | | | `-- xwud-1.0.2.tar.xz
| | | | |-- data
-| | | | | |-- xbitmaps-1.0.1.tar.xz
-| | | | | |-- xcursor-themes-1.0.1.tar.xz
-| | | | | `-- xkeyboard-config-1.6.tar.xz
+| | | | | |-- xbitmaps-1.1.0.tar.xz
+| | | | | |-- xcursor-themes-1.0.2.tar.xz
+| | | | | `-- xkeyboard-config-1.8.tar.xz
| | | | |-- doc
-| | | | | |-- xorg-docs-1.4.tar.xz
-| | | | | `-- xorg-sgml-doctools-1.2.tar.xz
+| | | | | |-- xorg-docs-1.5.tar.xz
+| | | | | `-- xorg-sgml-doctools-1.4.tar.xz
| | | | |-- driver
-| | | | | |-- xf86-input-acecad-1.3.0.tar.xz
-| | | | | |-- xf86-input-aiptek-1.2.0.tar.xz
+| | | | | |-- xf86-input-acecad-1.4.0.tar.xz
+| | | | | |-- xf86-input-aiptek-1.3.0.tar.xz
| | | | | |-- xf86-input-calcomp-1.1.2.tar.xz
| | | | | |-- xf86-input-citron-2.2.2.tar.xz
| | | | | |-- xf86-input-digitaledge-1.1.1.tar.xz
@@ -8405,205 +8699,197 @@ see additional documentation files. | | | | | |-- xf86-input-dynapro-1.1.2.tar.xz
| | | | | |-- xf86-input-elo2300-1.1.2.tar.xz
| | | | | |-- xf86-input-elographics-1.2.3.tar.xz
-| | | | | |-- xf86-input-evdev-2.2.5.tar.xz
+| | | | | |-- xf86-input-evdev-2.3.3.tar.xz
| | | | | |-- xf86-input-fpit-1.3.0.tar.xz
| | | | | |-- xf86-input-hyperpen-1.3.0.tar.xz
| | | | | |-- xf86-input-jamstudio-1.2.0.tar.xz
-| | | | | |-- xf86-input-joystick-1.4.0.tar.xz
-| | | | | |-- xf86-input-keyboard-1.3.2.tar.xz
+| | | | | |-- xf86-input-joystick-1.4.99.2.tar.xz
+| | | | | |-- xf86-input-keyboard-1.4.0.tar.xz
| | | | | |-- xf86-input-magellan-1.2.0.tar.xz
| | | | | |-- xf86-input-magictouch-1.0.0.5.tar.xz
| | | | | |-- xf86-input-microtouch-1.2.0.tar.xz
-| | | | | |-- xf86-input-mouse-1.4.0.tar.xz
+| | | | | |-- xf86-input-mouse-1.5.0.tar.xz
| | | | | |-- xf86-input-mutouch-1.2.1.tar.xz
| | | | | |-- xf86-input-palmax-1.2.0.tar.xz
-| | | | | |-- xf86-input-penmount-1.4.0.tar.xz
+| | | | | |-- xf86-input-penmount-1.4.1.tar.xz
| | | | | |-- xf86-input-spaceorb-1.1.1.tar.xz
| | | | | |-- xf86-input-summa-1.2.0.tar.xz
-| | | | | |-- xf86-input-synaptics-1.1.3.tar.xz
+| | | | | |-- xf86-input-synaptics-1.2.2.tar.xz
| | | | | |-- xf86-input-tek4957-1.2.0.tar.xz
| | | | | |-- xf86-input-ur98-1.1.0.tar.xz
-| | | | | |-- xf86-input-vmmouse-12.6.4.tar.xz
-| | | | | |-- xf86-input-void-1.2.0.tar.xz
+| | | | | |-- xf86-input-vmmouse-12.6.9.tar.xz
+| | | | | |-- xf86-input-void-1.3.0.tar.xz
+| | | | | |-- xf86-input-wacom-0.10.5.tar.xz
| | | | | |-- xf86-video-apm-1.2.2.tar.xz
-| | | | | |-- xf86-video-ark-0.7.1.tar.xz
+| | | | | |-- xf86-video-ark-0.7.2.tar.xz
| | | | | |-- xf86-video-ast-0.89.9.tar.xz
-| | | | | |-- xf86-video-ati-6.12.2.tar.xz
-| | | | | |-- xf86-video-chips-1.2.1.tar.xz
+| | | | | |-- xf86-video-ati-6.13.0.tar.xz
+| | | | | |-- xf86-video-chips-1.2.2.tar.xz
| | | | | |-- xf86-video-cirrus-1.3.2.tar.xz
| | | | | |-- xf86-video-cyrix-1.1.0.tar.xz
-| | | | | |-- xf86-video-dummy-0.3.2.tar.xz
-| | | | | |-- xf86-video-geode-2.11.3.tar.xz
-| | | | | |-- xf86-video-glide-1.0.2.tar.xz
+| | | | | |-- xf86-video-dummy-0.3.3.tar.xz
+| | | | | |-- xf86-video-geode-2.11.8.tar.xz
+| | | | | |-- xf86-video-glide-1.0.3.tar.xz
| | | | | |-- xf86-video-glint-1.2.4.tar.xz
| | | | | |-- xf86-video-i128-1.3.3.tar.xz
| | | | | |-- xf86-video-i740-1.3.2.tar.xz
| | | | | |-- xf86-video-impact-0.2.0.tar.xz
| | | | | |-- xf86-video-imstt-1.1.0.tar.xz
-| | | | | |-- xf86-video-intel-2.5.1.tar.xz
-| | | | | |-- xf86-video-intel-2.6.3.tar.xz
-| | | | | |-- xf86-video-intel-2.7.1.tar.xz
-| | | | | |-- xf86-video-intel-2.8.0.tar.xz
-| | | | | |-- xf86-video-intel-2.8.1.tar.xz
+| | | | | |-- xf86-video-intel-2.11.0.tar.xz
| | | | | |-- xf86-video-mach64-6.8.2.tar.xz
| | | | | |-- xf86-video-mga-1.4.11.tar.xz
| | | | | |-- xf86-video-neomagic-1.2.4.tar.xz
-| | | | | |-- xf86-video-newport-0.2.2.tar.xz
-| | | | | |-- xf86-video-nsc-2.8.3.tar.xz
-| | | | | |-- xf86-video-nv-2.1.14.tar.xz
-| | | | | |-- xf86-video-openchrome-0.2.903.tar.xz
+| | | | | |-- xf86-video-nv-2.1.17.tar.xz
+| | | | | |-- xf86-video-openchrome-0.2.904.tar.xz
| | | | | |-- xf86-video-r128-6.8.1.tar.xz
-| | | | | |-- xf86-video-radeonhd-1.2.5.tar.xz
-| | | | | |-- xf86-video-rendition-4.2.2.tar.xz
+| | | | | |-- xf86-video-radeonhd-1.3.0.tar.xz
+| | | | | |-- xf86-video-rendition-4.2.3.tar.xz
| | | | | |-- xf86-video-s3-0.6.3.tar.xz
| | | | | |-- xf86-video-s3virge-1.10.4.tar.xz
| | | | | |-- xf86-video-savage-2.3.1.tar.xz
-| | | | | |-- xf86-video-siliconmotion-1.7.2.tar.xz
+| | | | | |-- xf86-video-siliconmotion-1.7.4.tar.xz
| | | | | |-- xf86-video-sis-0.10.2.tar.xz
| | | | | |-- xf86-video-sisusb-0.9.3.tar.xz
| | | | | |-- xf86-video-tdfx-1.4.3.tar.xz
-| | | | | |-- xf86-video-tga-1.2.0.tar.xz
-| | | | | |-- xf86-video-trident-1.3.2.tar.xz
-| | | | | |-- xf86-video-tseng-1.2.2.tar.xz
+| | | | | |-- xf86-video-tga-1.2.1.tar.xz
+| | | | | |-- xf86-video-trident-1.3.3.tar.xz
+| | | | | |-- xf86-video-tseng-1.2.3.tar.xz
| | | | | |-- xf86-video-v4l-0.2.0.tar.xz
| | | | | |-- xf86-video-vermilion-1.0.1.tar.xz
-| | | | | |-- xf86-video-vesa-2.2.1.tar.xz
+| | | | | |-- xf86-video-vesa-2.3.0.tar.xz
| | | | | |-- xf86-video-vga-4.1.0.tar.xz
-| | | | | |-- xf86-video-vmware-10.16.7.tar.xz
+| | | | | |-- xf86-video-vmware-10.16.9.tar.xz
| | | | | |-- xf86-video-voodoo-1.2.3.tar.xz
-| | | | | |-- xf86-video-wsfb-0.2.1.tar.xz
-| | | | | |-- xf86-video-xgi-1.5.0.tar.xz
-| | | | | `-- xf86-video-xgixp-1.7.99.3.tar.xz
+| | | | | `-- xf86-video-xgi-1.5.1.tar.xz
| | | | |-- font
-| | | | | |-- encodings-1.0.2.tar.xz
-| | | | | |-- font-adobe-100dpi-1.0.0.tar.xz
-| | | | | |-- font-adobe-75dpi-1.0.0.tar.xz
-| | | | | |-- font-adobe-utopia-100dpi-1.0.1.tar.xz
-| | | | | |-- font-adobe-utopia-75dpi-1.0.1.tar.xz
-| | | | | |-- font-adobe-utopia-type1-1.0.1.tar.xz
-| | | | | |-- font-alias-1.0.1.tar.xz
-| | | | | |-- font-arabic-misc-1.0.0.tar.xz
-| | | | | |-- font-bh-100dpi-1.0.0.tar.xz
-| | | | | |-- font-bh-75dpi-1.0.0.tar.xz
-| | | | | |-- font-bh-lucidatypewriter-100dpi-1.0.0.tar.xz
-| | | | | |-- font-bh-lucidatypewriter-75dpi-1.0.0.tar.xz
-| | | | | |-- font-bh-ttf-1.0.0.tar.xz
-| | | | | |-- font-bh-type1-1.0.0.tar.xz
-| | | | | |-- font-bitstream-100dpi-1.0.0.tar.xz
-| | | | | |-- font-bitstream-75dpi-1.0.0.tar.xz
-| | | | | |-- font-bitstream-speedo-1.0.0.tar.xz
-| | | | | |-- font-bitstream-type1-1.0.0.tar.xz
-| | | | | |-- font-cronyx-cyrillic-1.0.0.tar.xz
-| | | | | |-- font-cursor-misc-1.0.0.tar.xz
-| | | | | |-- font-daewoo-misc-1.0.0.tar.xz
-| | | | | |-- font-dec-misc-1.0.0.tar.xz
-| | | | | |-- font-ibm-type1-1.0.0.tar.xz
-| | | | | |-- font-isas-misc-1.0.0.tar.xz
-| | | | | |-- font-jis-misc-1.0.0.tar.xz
-| | | | | |-- font-micro-misc-1.0.0.tar.xz
-| | | | | |-- font-misc-cyrillic-1.0.0.tar.xz
-| | | | | |-- font-misc-ethiopic-1.0.0.tar.xz
-| | | | | |-- font-misc-meltho-1.0.0.tar.xz
-| | | | | |-- font-misc-misc-1.0.0.tar.xz
-| | | | | |-- font-mutt-misc-1.0.0.tar.xz
-| | | | | |-- font-schumacher-misc-1.0.0.tar.xz
-| | | | | |-- font-screen-cyrillic-1.0.1.tar.xz
-| | | | | |-- font-sony-misc-1.0.0.tar.xz
-| | | | | |-- font-sun-misc-1.0.0.tar.xz
-| | | | | |-- font-util-1.0.1.tar.xz
-| | | | | |-- font-winitzki-cyrillic-1.0.0.tar.xz
-| | | | | `-- font-xfree86-type1-1.0.1.tar.xz
+| | | | | |-- encodings-1.0.3.tar.xz
+| | | | | |-- font-adobe-100dpi-1.0.1.tar.xz
+| | | | | |-- font-adobe-75dpi-1.0.1.tar.xz
+| | | | | |-- font-adobe-utopia-100dpi-1.0.2.tar.xz
+| | | | | |-- font-adobe-utopia-75dpi-1.0.2.tar.xz
+| | | | | |-- font-adobe-utopia-type1-1.0.2.tar.xz
+| | | | | |-- font-alias-1.0.2.tar.xz
+| | | | | |-- font-arabic-misc-1.0.1.tar.xz
+| | | | | |-- font-bh-100dpi-1.0.1.tar.xz
+| | | | | |-- font-bh-75dpi-1.0.1.tar.xz
+| | | | | |-- font-bh-lucidatypewriter-100dpi-1.0.1.tar.xz
+| | | | | |-- font-bh-lucidatypewriter-75dpi-1.0.1.tar.xz
+| | | | | |-- font-bh-ttf-1.0.1.tar.xz
+| | | | | |-- font-bh-type1-1.0.1.tar.xz
+| | | | | |-- font-bitstream-100dpi-1.0.1.tar.xz
+| | | | | |-- font-bitstream-75dpi-1.0.1.tar.xz
+| | | | | |-- font-bitstream-speedo-1.0.1.tar.xz
+| | | | | |-- font-bitstream-type1-1.0.1.tar.xz
+| | | | | |-- font-cronyx-cyrillic-1.0.1.tar.xz
+| | | | | |-- font-cursor-misc-1.0.1.tar.xz
+| | | | | |-- font-daewoo-misc-1.0.1.tar.xz
+| | | | | |-- font-dec-misc-1.0.1.tar.xz
+| | | | | |-- font-ibm-type1-1.0.1.tar.xz
+| | | | | |-- font-isas-misc-1.0.1.tar.xz
+| | | | | |-- font-jis-misc-1.0.1.tar.xz
+| | | | | |-- font-micro-misc-1.0.1.tar.xz
+| | | | | |-- font-misc-cyrillic-1.0.1.tar.xz
+| | | | | |-- font-misc-ethiopic-1.0.1.tar.xz
+| | | | | |-- font-misc-meltho-1.0.1.tar.xz
+| | | | | |-- font-misc-misc-1.1.0.tar.xz
+| | | | | |-- font-mutt-misc-1.0.1.tar.xz
+| | | | | |-- font-schumacher-misc-1.1.0.tar.xz
+| | | | | |-- font-screen-cyrillic-1.0.2.tar.xz
+| | | | | |-- font-sony-misc-1.0.1.tar.xz
+| | | | | |-- font-sun-misc-1.0.1.tar.xz
+| | | | | |-- font-util-1.1.1.tar.xz
+| | | | | |-- font-winitzki-cyrillic-1.0.1.tar.xz
+| | | | | `-- font-xfree86-type1-1.0.2.tar.xz
| | | | |-- lib
| | | | | |-- libFS-1.0.2.tar.xz
-| | | | | |-- libICE-1.0.5.tar.xz
-| | | | | |-- libSM-1.1.0.tar.xz
-| | | | | |-- libX11-1.2.2.tar.xz
-| | | | | |-- libXScrnSaver-1.1.3.tar.xz
+| | | | | |-- libICE-1.0.6.tar.xz
+| | | | | |-- libSM-1.1.1.tar.xz
+| | | | | |-- libX11-1.3.3.tar.xz
+| | | | | |-- libXScrnSaver-1.2.0.tar.xz
| | | | | |-- libXTrap-1.0.0.tar.xz
-| | | | | |-- libXau-1.0.4.tar.xz
-| | | | | |-- libXaw-1.0.6.tar.xz
-| | | | | |-- libXcomposite-0.4.0.tar.xz
-| | | | | |-- libXcursor-1.1.9.tar.xz
-| | | | | |-- libXdamage-1.1.1.tar.xz
-| | | | | |-- libXdmcp-1.0.2.tar.xz
+| | | | | |-- libXau-1.0.5.tar.xz
+| | | | | |-- libXaw-1.0.7.tar.xz
+| | | | | |-- libXcomposite-0.4.1.tar.xz
+| | | | | |-- libXcursor-1.1.10.tar.xz
+| | | | | |-- libXdamage-1.1.2.tar.xz
+| | | | | |-- libXdmcp-1.0.3.tar.xz
| | | | | |-- libXevie-1.0.2.tar.xz
-| | | | | |-- libXext-1.0.5.tar.xz
-| | | | | |-- libXfixes-4.0.3.tar.xz
-| | | | | |-- libXfont-1.4.0.tar.xz
-| | | | | |-- libXfontcache-1.0.4.tar.xz
-| | | | | |-- libXft-2.1.13.tar.xz
-| | | | | |-- libXi-1.2.1.tar.xz
-| | | | | |-- libXinerama-1.0.3.tar.xz
-| | | | | |-- libXmu-1.0.4.tar.xz
+| | | | | |-- libXext-1.1.tar.xz
+| | | | | |-- libXfixes-4.0.4.tar.xz
+| | | | | |-- libXfont-1.4.1.tar.xz
+| | | | | |-- libXfontcache-1.0.5.tar.xz
+| | | | | |-- libXft-2.1.14.tar.xz
+| | | | | |-- libXi-1.3.tar.xz
+| | | | | |-- libXinerama-1.1.tar.xz
+| | | | | |-- libXmu-1.0.5.tar.xz
| | | | | |-- libXp-1.0.0.tar.xz
-| | | | | |-- libXpm-3.5.7.tar.xz
+| | | | | |-- libXpm-3.5.8.tar.xz
| | | | | |-- libXprintAppUtil-1.0.1.tar.xz
| | | | | |-- libXprintUtil-1.0.1.tar.xz
| | | | | |-- libXrandr-1.3.0.tar.xz
-| | | | | |-- libXrender-0.9.4.tar.xz
-| | | | | |-- libXres-1.0.3.tar.xz
-| | | | | |-- libXt-1.0.6.tar.xz
-| | | | | |-- libXtst-1.0.3.tar.xz
-| | | | | |-- libXv-1.0.4.tar.xz
-| | | | | |-- libXvMC-1.0.4.tar.xz
-| | | | | |-- libXxf86dga-1.0.2.tar.xz
-| | | | | |-- libXxf86misc-1.0.1.tar.xz
-| | | | | |-- libXxf86vm-1.0.2.tar.xz
-| | | | | |-- libdmx-1.0.2.tar.xz
-| | | | | |-- libfontenc-1.0.4.tar.xz
-| | | | | |-- liblbxutil-1.0.1.tar.xz
-| | | | | |-- libpciaccess-0.10.6.tar.xz
-| | | | | |-- libpthread-stubs-0.1.tar.xz
-| | | | | |-- libxkbfile-1.0.5.tar.xz
+| | | | | |-- libXrender-0.9.5.tar.xz
+| | | | | |-- libXres-1.0.4.tar.xz
+| | | | | |-- libXt-1.0.8.tar.xz
+| | | | | |-- libXtst-1.1.0.tar.xz
+| | | | | |-- libXv-1.0.5.tar.xz
+| | | | | |-- libXvMC-1.0.5.tar.xz
+| | | | | |-- libXxf86dga-1.1.1.tar.xz
+| | | | | |-- libXxf86misc-1.0.2.tar.xz
+| | | | | |-- libXxf86vm-1.1.0.tar.xz
+| | | | | |-- libdmx-1.1.0.tar.xz
+| | | | | |-- libfontenc-1.0.5.tar.xz
+| | | | | |-- libpciaccess-0.11.0.tar.xz
+| | | | | |-- libxkbfile-1.0.6.tar.xz
| | | | | |-- libxkbui-1.0.2.tar.xz
-| | | | | |-- pixman-0.15.18.tar.xz
-| | | | | `-- xtrans-1.2.4.tar.xz
+| | | | | |-- pixman-0.16.6.tar.xz
+| | | | | `-- xtrans-1.2.5.tar.xz
| | | | |-- proto
-| | | | | |-- bigreqsproto-1.0.2.tar.xz
-| | | | | |-- compositeproto-0.4.tar.xz
-| | | | | |-- damageproto-1.1.0.tar.xz
-| | | | | |-- dmxproto-2.2.2.tar.xz
-| | | | | |-- dri2proto-2.1.tar.xz
-| | | | | |-- evieext-1.0.2.tar.xz
-| | | | | |-- fixesproto-4.0.tar.xz
-| | | | | |-- fontcacheproto-0.1.2.tar.xz
-| | | | | |-- fontsproto-2.0.2.tar.xz
-| | | | | |-- glproto-1.4.10.tar.xz
-| | | | | |-- inputproto-1.5.1.tar.xz
-| | | | | |-- kbproto-1.0.3.tar.xz
+| | | | | |-- bigreqsproto-1.1.0.tar.xz
+| | | | | |-- compositeproto-0.4.1.tar.xz
+| | | | | |-- damageproto-1.2.0.tar.xz
+| | | | | |-- dmxproto-2.3.tar.xz
+| | | | | |-- dri2proto-2.3.tar.xz
+| | | | | |-- evieext-1.1.0.tar.xz
+| | | | | |-- fixesproto-4.1.1.tar.xz
+| | | | | |-- fontcacheproto-0.1.3.tar.xz
+| | | | | |-- fontsproto-2.1.0.tar.xz
+| | | | | |-- glproto-1.4.11.tar.xz
+| | | | | |-- inputproto-2.0.tar.xz
+| | | | | |-- kbproto-1.0.4.tar.xz
| | | | | |-- printproto-1.0.4.tar.xz
-| | | | | |-- randrproto-1.3.0.tar.xz
-| | | | | |-- recordproto-1.13.2.tar.xz
+| | | | | |-- randrproto-1.3.1.tar.xz
+| | | | | |-- recordproto-1.14.tar.xz
| | | | | |-- renderproto-0.11.tar.xz
-| | | | | |-- resourceproto-1.0.2.tar.xz
-| | | | | |-- scrnsaverproto-1.1.0.tar.xz
+| | | | | |-- resourceproto-1.1.0.tar.xz
+| | | | | |-- scrnsaverproto-1.2.0.tar.xz
| | | | | |-- trapproto-3.4.3.tar.xz
-| | | | | |-- videoproto-2.2.2.tar.xz
-| | | | | |-- xcmiscproto-1.1.2.tar.xz
-| | | | | |-- xextproto-7.0.5.tar.xz
-| | | | | |-- xf86bigfontproto-1.1.2.tar.xz
-| | | | | |-- xf86dgaproto-2.0.3.tar.xz
-| | | | | |-- xf86driproto-2.0.4.tar.xz
-| | | | | |-- xf86miscproto-0.9.2.tar.xz
+| | | | | |-- videoproto-2.3.0.tar.xz
+| | | | | |-- xcmiscproto-1.2.0.tar.xz
+| | | | | |-- xextproto-7.1.1.tar.xz
+| | | | | |-- xf86bigfontproto-1.2.0.tar.xz
+| | | | | |-- xf86dgaproto-2.1.tar.xz
+| | | | | |-- xf86driproto-2.1.0.tar.xz
+| | | | | |-- xf86miscproto-0.9.3.tar.xz
| | | | | |-- xf86rushproto-1.1.2.tar.xz
-| | | | | |-- xf86vidmodeproto-2.2.2.tar.xz
-| | | | | |-- xineramaproto-1.1.2.tar.xz
-| | | | | |-- xproto-7.0.15.tar.xz
-| | | | | `-- xproxymanagementprotocol-1.0.2.tar.xz
+| | | | | |-- xf86vidmodeproto-2.3.tar.xz
+| | | | | |-- xineramaproto-1.2.tar.xz
+| | | | | |-- xproto-7.0.16.tar.xz
+| | | | | `-- xproxymanagementprotocol-1.0.3.tar.xz
| | | | |-- util
| | | | | |-- gccmakedep-1.0.2.tar.xz
-| | | | | |-- imake-1.0.2.tar.xz
+| | | | | |-- imake-1.0.3.tar.xz
| | | | | |-- lndir-1.0.1.tar.xz
-| | | | | |-- makedepend-1.0.1.tar.xz
-| | | | | |-- util-macros-1.2.2.tar.xz
-| | | | | `-- xorg-cf-files-1.0.2.tar.xz
+| | | | | |-- makedepend-1.0.2.tar.xz
+| | | | | |-- util-macros-1.7.0.tar.xz
+| | | | | `-- xorg-cf-files-1.0.3.tar.xz
| | | | |-- xcb
-| | | | | |-- libxcb-1.3.tar.xz
-| | | | | |-- xcb-proto-1.5.tar.xz
-| | | | | |-- xcb-util-0.3.5.tar.xz
-| | | | | `-- xpyb-1.1.tar.xz
+| | | | | |-- libpthread-stubs-0.3.tar.xz
+| | | | | |-- libxcb-1.6.tar.xz
+| | | | | |-- xcb-proto-1.6.tar.xz
+| | | | | |-- xcb-util-0.3.6.tar.xz
+| | | | | `-- xpyb-1.2.tar.xz
| | | | `-- xserver
-| | | | `-- xorg-server-1.6.3.tar.xz
+| | | | `-- xorg-server-1.7.7.tar.xz
| | | `-- x11.SlackBuild
| | |-- x11-skel
| | | |-- doinst.sh.gz
@@ -8626,39 +8912,48 @@ see additional documentation files. | | |-- xdg-utils
| | | |-- doinst.sh.gz
| | | |-- slack-desc
-| | | |-- xdg-utils-20090202cvs.tar.bz2
+| | | |-- xdg-utils-20100506cvs.tar.bz2
| | | |-- xdg-utils-cvs_checkout.sh
| | | |-- xdg-utils.SlackBuild
| | | `-- xdg-utils.info
+| | |-- xf86-video-nouveau
+| | | |-- this_is_NOT_a_driver.txt
+| | | `-- xf86-video-nouveau-blacklist-noarch-1.txz
| | `-- xterm
-| | |-- patches
| | |-- slack-desc
-| | |-- xterm-243.tar.xz
+| | |-- xterm-258.tar.xz
| | `-- xterm.SlackBuild
| |-- xap
| | |-- MPlayer
| | | |-- Blue-1.7.tar.bz2
| | | |-- MPlayer.SlackBuild
-| | | |-- MPlayer_nolibdvdcss-r29390.tar.xz
+| | | |-- MPlayer_nolibdvdcss-20100218.tar.xz
| | | `-- slack-desc
| | |-- audacious
-| | | |-- audacious-1.5.1.tar.bz2
+| | | |-- audacious-2.3.tar.xz
| | | |-- audacious.SlackBuild
-| | | |-- audacious.handle_cmd_line_options.diff.gz
+| | | |-- doinst.sh.gz
| | | `-- slack-desc
| | |-- audacious-plugins
-| | | |-- amidi-plug.fix-drct.diff.gz
-| | | |-- audacious-plugins-1.5.1.tar.bz2
+| | | |-- audacious-plugins-2.3.tar.xz
| | | |-- audacious-plugins.SlackBuild
-| | | |-- audacious-plugins.libmtp8.diff.gz
| | | `-- slack-desc
| | |-- blackbox
-| | | |-- bbkeys-0.8.6.tar.gz
-| | | |-- blackbox-0.65.0.tar.gz
+| | | |-- bbkeys-0.9.1.tar.xz
+| | | |-- blackbox-0.70.1-gcc-4.3.patch.gz
+| | | |-- blackbox-0.70.1.tar.xz
| | | |-- blackbox.SlackBuild
-| | | |-- blackbox_0.65.0-5.diff.gz
| | | |-- slack-desc
| | | `-- xinitrc.blackbox.gz
+| | |-- blueman
+| | | |-- blueman-1.21.tar.xz
+| | | |-- blueman-open
+| | | |-- blueman-use_blueman-open_for_obexfs.diff.gz
+| | | |-- blueman.SlackBuild
+| | | |-- doinst.sh.gz
+| | | |-- fix_on_off_loop.diff.gz
+| | | |-- no_hide_applet.diff.gz
+| | | `-- slack-desc
| | |-- electricsheep
| | | |-- README.slackware
| | | |-- electricsheep-20090306.tar.xz
@@ -8680,17 +8975,23 @@ see additional documentation files. | | | |-- slack-desc
| | | |-- system.fvwm2rc.gz
| | | `-- xinitrc.fvwm2.gz
+| | |-- geeqie
+| | | |-- doinst.sh.gz
+| | | |-- geeqie-1.0.tar.xz
+| | | |-- geeqie.SlackBuild
+| | | `-- slack-desc
| | |-- gftp
| | | |-- gftp-2.0.19.tar.bz2
| | | |-- gftp.SlackBuild
| | | |-- gftp.desktop.gz
| | | `-- slack-desc
| | |-- gimp
-| | | |-- gimp-2.6.6.tar.bz2
+| | | |-- gimp-2.6.8.tar.xz
| | | |-- gimp.SlackBuild
+| | | |-- gimp.png14.diff.gz
| | | `-- slack-desc
| | |-- gkrellm
-| | | |-- gkrellm-2.3.2.tar.bz2
+| | | |-- gkrellm-2.3.4.tar.bz2
| | | |-- gkrellm-countdown-0.1.1.tar.gz
| | | |-- gkrellm.SlackBuild
| | | |-- gkrellm.theme.defaults.diff.gz
@@ -8698,33 +8999,28 @@ see additional documentation files. | | |-- gnuchess
| | | |-- Sjeng-Free-11.2.tar.bz2
| | | |-- chess.png
-| | | |-- eboard-1.0.3.tar.bz2
+| | | |-- eboard-1.1.1.tar.bz2
+| | | |-- eboard.assert.diff.gz
| | | |-- eboard.desktop
| | | |-- gnuchess-5.07.tar.bz2
| | | |-- gnuchess.SlackBuild
| | | |-- gnuchess.SlackBuild.diff.gz
| | | |-- gnuchess.gcc4_fix.diff.gz
+| | | |-- gnuchess.getline.glibc.diff.gz
| | | |-- slack-desc
-| | | |-- xboard-4.2.7.tar.bz2
-| | | |-- xboard.buffer_overflow_fix.diff.gz
-| | | |-- xboard.desktop
-| | | `-- xboard.infodir.diff.gz
+| | | |-- xboard-4.4.2.tar.xz
+| | | `-- xboard.desktop
| | |-- gnuplot
-| | | |-- gnuplot-4.2.5.tar.xz
+| | | |-- gnuplot-4.2.6.tar.xz
| | | |-- gnuplot.SlackBuild
| | | `-- slack-desc
-| | |-- gqview
-| | | |-- doinst.sh.gz
-| | | |-- gqview-2.1.5.tar.bz2
-| | | |-- gqview.SlackBuild
-| | | `-- slack-desc
| | |-- gucharmap
| | | |-- doinst.sh.gz
-| | | |-- gucharmap-2.26.2.tar.xz
+| | | |-- gucharmap-2.28.2.tar.xz
| | | |-- gucharmap.SlackBuild
| | | `-- slack-desc
| | |-- gv
-| | | |-- gv-3.6.7.tar.xz
+| | | |-- gv-3.6.9.tar.xz
| | | |-- gv.SlackBuild
| | | `-- slack-desc
| | |-- gxine
@@ -8733,12 +9029,12 @@ see additional documentation files. | | | |-- gxine.desktop.gz
| | | `-- slack-desc
| | |-- imagemagick
-| | | |-- ImageMagick-6.5.3-3.tar.xz
+| | | |-- ImageMagick-6.5.9-6.tar.xz
| | | |-- imagemagick.SlackBuild
| | | `-- slack-desc
| | |-- mozilla-firefox
-| | | |-- firefox-3.5.2-source.tar.bz2
-| | | |-- firefox-3.5.2-source.tar.bz2.asc
+| | | |-- firefox-3.6.3.source.tar.bz2
+| | | |-- firefox-3.6.3.source.tar.bz2.asc
| | | |-- firefox.moz_plugin_path.diff.gz
| | | |-- firefox.png
| | | |-- mimeTypes.rdf.gz
@@ -8747,20 +9043,22 @@ see additional documentation files. | | | |-- mozilla-firefox.desktop
| | | `-- slack-desc
| | |-- mozilla-thunderbird
-| | | |-- mozilla-thunderbird-firefox.diff.gz
+| | | |-- mimeTypes.rdf.gz
| | | |-- mozilla-thunderbird.SlackBuild
| | | |-- mozilla-thunderbird.desktop
| | | |-- slack-desc
-| | | |-- thunderbird-2.0.0.23-source.tar.bz2
-| | | |-- thunderbird-2.0.0.23-source.tar.bz2.asc
+| | | |-- thunderbird-3.0.4.source.tar.bz2
+| | | |-- thunderbird-3.0.4.source.tar.bz2.asc
| | | `-- thunderbird.png
| | |-- pan
| | | |-- pan-0.133.tar.bz2
| | | |-- pan.SlackBuild
+| | | |-- pan.gcc44.diff.gz
+| | | |-- pan.gmime2.4.diff.gz
| | | `-- slack-desc
| | |-- pidgin
-| | | |-- pidgin-2.5.9.tar.xz
-| | | |-- pidgin-encryption-3.0.tar.gz
+| | | |-- pidgin-2.7.0.tar.xz
+| | | |-- pidgin-encryption-3.1.tar.gz
| | | |-- pidgin.SlackBuild
| | | |-- purple-allow-sign-rsa-md5.patch.gz
| | | `-- slack-desc
@@ -8776,19 +9074,26 @@ see additional documentation files. | | |-- sane
| | | |-- dll.conf.additions.gz
| | | |-- doinst.sh.gz
-| | | |-- sane-backends-1.0.19.tar.bz2
+| | | |-- sane-backends-1.0.21.tar.bz2
+| | | |-- sane-frontends-1.0.14-sane_cap_always_settable.diff.gz
| | | |-- sane-frontends-1.0.14.tar.bz2
| | | |-- sane.SlackBuild
| | | `-- slack-desc
| | |-- seamonkey
| | | |-- doinst.sh.gz
-| | | |-- seamonkey-1.1.17.source.tar.xz
+| | | |-- pkgconfig
+| | | | |-- seamonkey-gtkmozembed.pc
+| | | | |-- seamonkey-js.pc
+| | | | |-- seamonkey-nspr.pc
+| | | | |-- seamonkey-nss.pc
+| | | | |-- seamonkey-plugin.pc
+| | | | `-- seamonkey-xpcom.pc
+| | | |-- seamonkey-2.0.4.source.tar.xz
| | | |-- seamonkey-icon.png
| | | |-- seamonkey-mail-icon.png
| | | |-- seamonkey-mail.desktop
| | | |-- seamonkey.SlackBuild
| | | |-- seamonkey.desktop
-| | | |-- seamonkey.moz_plugin_path.diff.gz
| | | `-- slack-desc
| | |-- seyon
| | | |-- seyon-2.20c.lsm
@@ -8807,8 +9112,9 @@ see additional documentation files. | | | |-- slack-desc
| | | |-- windowmaker.SlackBuild
| | | |-- windowmaker.no-mmx.diff.gz
+| | | |-- windowmaker.png.1.4.0.diff.gz
| | | |-- wmaker.inst.diff.gz
-| | | `-- xinitrc.wmaker
+| | | `-- xinitrc.wmaker.gz
| | |-- x11-ssh-askpass
| | | |-- README
| | | |-- slack-desc
@@ -8832,44 +9138,50 @@ see additional documentation files. | | |-- xfce
| | | |-- icons.tar.xz
| | | |-- patches
-| | | | |-- exo_quoting_fix.diff.gz
-| | | | |-- launcher-plugin-migrate-icon-cat.diff.gz
-| | | | |-- migrate-itheme-smartly.diff.gz
-| | | | |-- terminal-0.4.0-fixup_docdir.diff.gz
+| | | | |-- terminal.gtk.2.18.fix.diff.gz
| | | | |-- thunar-1.0.1-fixup_docdir.diff.gz
+| | | | |-- thunar-1.0.1-png14.diff.gz
+| | | | |-- thunar-fix_umask_properly.diff.gz
| | | | |-- xfcalendar.desktop.in.diff.gz
+| | | | |-- xfce-utils.xinitrc.consolekit.diff.gz
+| | | | |-- xfce4-settings.libxklavier5.diff.gz
| | | | `-- xfdesktop-fix_education_icon.diff.gz
| | | |-- profile.d
| | | | |-- xfce.csh
| | | | `-- xfce.sh
| | | |-- slack-desc
| | | |-- src
-| | | | |-- Terminal-0.4.0.tar.xz
+| | | | |-- Terminal-0.4.4.tar.xz
| | | | |-- Thunar-1.0.1.tar.xz
-| | | | |-- exo-0.3.101.tar.xz
+| | | | |-- exo-0.3.106.tar.xz
| | | | |-- gtk-xfce-engine-2.6.0.tar.xz
| | | | |-- libxfce4menu-4.6.1.tar.xz
| | | | |-- libxfce4util-4.6.1.tar.xz
-| | | | |-- libxfcegui4-4.6.1.tar.xz
+| | | | |-- libxfcegui4-4.6.3.tar.xz
| | | | |-- mousepad-0.2.16.tar.xz
| | | | |-- orage-4.6.1.tar.xz
| | | | |-- xfce-utils-4.6.1.tar.xz
| | | | |-- xfce4-appfinder-4.6.1.tar.xz
-| | | | |-- xfce4-dev-tools-4.6.0.tar.xz
+| | | | |-- xfce4-dev-tools-4.7.2.tar.xz
| | | | |-- xfce4-mixer-4.6.1.tar.xz
-| | | | |-- xfce4-panel-4.6.1.tar.xz
+| | | | |-- xfce4-panel-4.6.3.tar.xz
| | | | |-- xfce4-session-4.6.1.tar.xz
-| | | | |-- xfce4-settings-4.6.1.tar.xz
+| | | | |-- xfce4-settings-4.6.4.tar.xz
| | | | |-- xfconf-4.6.1.tar.xz
| | | | |-- xfdesktop-4.6.1.tar.xz
| | | | |-- xfprint-4.6.1.tar.xz
| | | | |-- xfwm4-4.6.1.tar.xz
| | | | `-- xfwm4-themes-4.6.0.tar.xz
| | | `-- xfce.SlackBuild
+| | |-- xfce4-notifyd
+| | | |-- doinst.sh.gz
+| | | |-- slack-desc
+| | | |-- xfce4-notifyd-0.1.0.tar.bz2
+| | | `-- xfce4-notifyd.SlackBuild
| | |-- xfce4-power-manager
| | | |-- doinst.sh.gz
| | | |-- slack-desc
-| | | |-- xfce4-power-manager-0.6.6.tar.bz2
+| | | |-- xfce4-power-manager-0.8.5.tar.bz2
| | | `-- xfce4-power-manager.SlackBuild
| | |-- xfractint
| | | |-- palette.maps.tar.gz
@@ -8896,12 +9208,14 @@ see additional documentation files. | | | `-- xsnow-1.40.tar.gz
| | |-- xine-lib
| | | |-- slack-desc
-| | | |-- xine-lib-1.1.16.3.tar.bz2
+| | | |-- xine-lib-1.1.17.ff.diff.gz
+| | | |-- xine-lib-1.1.17.tar.bz2
| | | `-- xine-lib.SlackBuild
| | |-- xine-ui
| | | |-- slack-desc
| | | |-- xine-ui-0.99.5.tar.bz2
| | | |-- xine-ui.SlackBuild
+| | | |-- xine-ui.png14.diff.gz
| | | `-- xine.desktop.gz
| | |-- xlockmore
| | | |-- l-bob.README
@@ -8914,57 +9228,59 @@ see additional documentation files. | | | |-- xlockmore.SlackBuild
| | | `-- xlockmore.bitmap.diff.gz
| | |-- xmms
-| | | |-- arts_output-0.7.1.tar.gz
| | | |-- slack-desc
| | | |-- xmms-1.2.11.tar.bz2
| | | |-- xmms.SlackBuild
| | | |-- xmms.desktop
| | | |-- xmms.gtk.doublesize.diff.gz
+| | | |-- xmms.png
| | | `-- xmms.wmxmms_vis_depth_workaround.diff.gz
| | |-- xpaint
| | | |-- slack-desc
-| | | |-- xpaint-2.7.8.1.tar.bz2
-| | | |-- xpaint.SlackBuild
-| | | |-- xpaint_2.7.8.1-1.2.diff.gz
-| | | `-- xpaint_xaw3d_no_scroll_mode.diff.gz
+| | | |-- xpaint-2.8.16.tar.bz2
+| | | `-- xpaint.SlackBuild
| | |-- xpdf
-| | | |-- VendorP.h.buggy.diff
+| | | |-- doinst.sh.gz
+| | | |-- lang
+| | | | |-- xpdf-arabic.diff.gz
+| | | | |-- xpdf-arabic.tar.gz
+| | | | |-- xpdf-chinese-simplified.diff.gz
+| | | | |-- xpdf-chinese-simplified.tar.gz
+| | | | |-- xpdf-chinese-traditional.diff.gz
+| | | | |-- xpdf-chinese-traditional.tar.gz
+| | | | |-- xpdf-cyrillic.diff.gz
+| | | | |-- xpdf-cyrillic.tar.gz
+| | | | |-- xpdf-greek.diff.gz
+| | | | |-- xpdf-greek.tar.gz
+| | | | |-- xpdf-hebrew.diff.gz
+| | | | |-- xpdf-hebrew.tar.gz
+| | | | |-- xpdf-japanese.diff.gz
+| | | | |-- xpdf-japanese.tar.gz
+| | | | |-- xpdf-korean.diff.gz
+| | | | |-- xpdf-korean.tar.gz
+| | | | |-- xpdf-latin2.diff.gz
+| | | | |-- xpdf-latin2.tar.gz
+| | | | |-- xpdf-thai.diff.gz
+| | | | |-- xpdf-thai.tar.gz
+| | | | |-- xpdf-turkish.diff.gz
+| | | | `-- xpdf-turkish.tar.gz
+| | | |-- patches
+| | | | |-- xpdf-3.02pl1.patch
+| | | | |-- xpdf-3.02pl1.patch.sig
+| | | | |-- xpdf-3.02pl2.patch
+| | | | |-- xpdf-3.02pl2.patch.sig
+| | | | |-- xpdf-3.02pl3.patch
+| | | | |-- xpdf-3.02pl3.patch.sig
+| | | | |-- xpdf-3.02pl4.patch
+| | | | |-- xpdf-3.02pl4.patch.sig
+| | | | |-- xpdf-resizefix.diff.gz
+| | | | |-- xpdf_3.02-1.3.diff.gz
+| | | | `-- xpdfrc.diff.gz
| | | |-- slack-desc
| | | |-- xpdf-3.02.tar.gz
| | | |-- xpdf-3.02.tar.gz.sig
-| | | |-- xpdf-3.02pl1.patch
-| | | |-- xpdf-3.02pl1.patch.sig
-| | | |-- xpdf-3.02pl2.patch
-| | | |-- xpdf-3.02pl2.patch.sig
-| | | |-- xpdf-3.02pl3.patch
-| | | |-- xpdf-3.02pl3.patch.sig
-| | | |-- xpdf-arabic.diff.gz
-| | | |-- xpdf-arabic.tar.gz
-| | | |-- xpdf-chinese-simplified.diff.gz
-| | | |-- xpdf-chinese-simplified.tar.gz
-| | | |-- xpdf-chinese-traditional.diff.gz
-| | | |-- xpdf-chinese-traditional.tar.gz
-| | | |-- xpdf-cyrillic.diff.gz
-| | | |-- xpdf-cyrillic.tar.gz
-| | | |-- xpdf-greek.diff.gz
-| | | |-- xpdf-greek.tar.gz
-| | | |-- xpdf-hebrew.diff.gz
-| | | |-- xpdf-hebrew.tar.gz
-| | | |-- xpdf-japanese.diff.gz
-| | | |-- xpdf-japanese.tar.gz
-| | | |-- xpdf-korean.diff.gz
-| | | |-- xpdf-korean.tar.gz
-| | | |-- xpdf-latin2.diff.gz
-| | | |-- xpdf-latin2.tar.gz
-| | | |-- xpdf-resizefix.diff.gz
-| | | |-- xpdf-thai.diff.gz
-| | | |-- xpdf-thai.tar.gz
-| | | |-- xpdf-turkish.diff.gz
-| | | |-- xpdf-turkish.tar.gz
| | | |-- xpdf.SlackBuild
-| | | |-- xpdf.desktop
-| | | |-- xpdf_3.02-1.3.diff.gz
-| | | `-- xpdfrc.diff.gz
+| | | `-- xpdf.desktop
| | |-- xsane
| | | |-- slack-desc
| | | |-- xsane-0.996.tar.bz2
@@ -8972,18 +9288,20 @@ see additional documentation files. | | |-- xscreensaver
| | | |-- setuid.c.gz
| | | |-- slack-desc
-| | | |-- xscreensaver-5.08.tar.xz
+| | | |-- xscreensaver-5.11.tar.xz
| | | |-- xscreensaver.SlackBuild
| | | |-- xscreensaver.electricsheep.diff.gz
| | | `-- xscreensaver.setuid.diff.gz
| | |-- xv
| | | |-- slack-desc
-| | | |-- xv-3.10.tar.gz
+| | | |-- xv-3.10.tar.xz
+| | | |-- xv-3.10a-enhancements.20070520-20081216.diff.bz2
| | | |-- xv-3.10a-jumbo-README.txt
-| | | |-- xv-3.10a-jumbo-enh-patch-20050501.txt.bz2
-| | | |-- xv-3.10a-jumbo-fix-patch-20050410.txt.bz2
+| | | |-- xv-3.10a-jumbo-additions.diff.bz2
+| | | |-- xv-3.10a-jumbo-fix-enh-patch-20070520.txt.bz2
| | | |-- xv-3.10a.patch.gz
| | | |-- xv.SlackBuild
+| | | |-- xv.jasper.diff.gz
| | | |-- xv.prefix.diff.gz
| | | `-- xv.prefix_x86_64.diff.gz
| | `-- xxgdb
@@ -9001,6 +9319,7 @@ see additional documentation files. | |-- bsd-games.config.params.diff.gz
| |-- bsd-games.fortlen.diff.gz
| |-- bsd-games.fortunepath.diff.gz
+| |-- bsd-games.getline.diff.gz
| |-- bsd-games.ospeed.diff.gz
| |-- bsd-games.phantasia_install_fix.diff.gz
| |-- bsd-games.pom.diff.gz
@@ -9017,83 +9336,17 @@ see additional documentation files. | |-- MANIFEST.bz2
| |-- PACKAGES.TXT
| |-- packages
-| | |-- bash-4.0.024-x86_64-1.txt
-| | |-- bash-4.0.024-x86_64-1.txz
-| | |-- bash-4.0.024-x86_64-1.txz.asc
-| | `-- linux-2.6.30.5
-| | |-- README_FIRST.TXT
-| | |-- kernel-firmware-2.6.30.5-noarch-1_testing.txt
-| | |-- kernel-firmware-2.6.30.5-noarch-1_testing.txz
-| | |-- kernel-firmware-2.6.30.5-noarch-1_testing.txz.asc
-| | |-- kernel-generic-2.6.30.5-x86_64-1_testing.txt
-| | |-- kernel-generic-2.6.30.5-x86_64-1_testing.txz
-| | |-- kernel-generic-2.6.30.5-x86_64-1_testing.txz.asc
-| | |-- kernel-headers-2.6.30.5-x86-1_testing.txt
-| | |-- kernel-headers-2.6.30.5-x86-1_testing.txz
-| | |-- kernel-headers-2.6.30.5-x86-1_testing.txz.asc
-| | |-- kernel-modules-2.6.30.5-x86_64-1_testing.txt
-| | |-- kernel-modules-2.6.30.5-x86_64-1_testing.txz
-| | |-- kernel-modules-2.6.30.5-x86_64-1_testing.txz.asc
-| | |-- kernel-source-2.6.30.5-noarch-1_testing.txt
-| | |-- kernel-source-2.6.30.5-noarch-1_testing.txz
-| | `-- kernel-source-2.6.30.5-noarch-1_testing.txz.asc
+| | |-- amarok-2.3.0.90-x86_64-1.txt
+| | |-- amarok-2.3.0.90-x86_64-1.txz
+| | |-- amarok-2.3.0.90-x86_64-1.txz.asc
+| | |-- btrfs-progs-20100518-x86_64-1.txt
+| | |-- btrfs-progs-20100518-x86_64-1.txz
+| | `-- btrfs-progs-20100518-x86_64-1.txz.asc
| `-- source
-| |-- bash
-| | |-- bash-4.0-patches
-| | | |-- bash40-001
-| | | |-- bash40-001.sig
-| | | |-- bash40-002
-| | | |-- bash40-002.sig
-| | | |-- bash40-003
-| | | |-- bash40-003.sig
-| | | |-- bash40-004
-| | | |-- bash40-004.sig
-| | | |-- bash40-005
-| | | |-- bash40-005.sig
-| | | |-- bash40-006
-| | | |-- bash40-006.sig
-| | | |-- bash40-007
-| | | |-- bash40-007.sig
-| | | |-- bash40-008
-| | | |-- bash40-008.sig
-| | | |-- bash40-009
-| | | |-- bash40-009.sig
-| | | |-- bash40-010
-| | | |-- bash40-010.sig
-| | | |-- bash40-011
-| | | |-- bash40-011.sig
-| | | |-- bash40-012
-| | | |-- bash40-012.sig
-| | | |-- bash40-013
-| | | |-- bash40-013.sig
-| | | |-- bash40-014
-| | | |-- bash40-014.sig
-| | | |-- bash40-015
-| | | |-- bash40-015.sig
-| | | |-- bash40-016
-| | | |-- bash40-016.sig
-| | | |-- bash40-017
-| | | |-- bash40-017.sig
-| | | |-- bash40-018
-| | | |-- bash40-018.sig
-| | | |-- bash40-019
-| | | |-- bash40-019.sig
-| | | |-- bash40-020
-| | | |-- bash40-020.sig
-| | | |-- bash40-021
-| | | |-- bash40-021.sig
-| | | |-- bash40-022
-| | | |-- bash40-022.sig
-| | | |-- bash40-023
-| | | |-- bash40-023.sig
-| | | |-- bash40-024
-| | | `-- bash40-024.sig
-| | |-- bash-4.0.tar.bz2
-| | |-- bash.SlackBuild
-| | |-- doinst.sh.gz
-| | `-- slack-desc
-| `-- linux-2.6.30.5
-| `-- config-generic-2.6.30.5
+| `-- btrfs-progs
+| |-- btrfs-progs-20100518.tar.xz
+| |-- btrfs-progs.SlackBuild
+| `-- slack-desc
`-- usb-and-pxe-installers
|-- README_PXE.TXT
|-- README_USB.TXT
@@ -9101,5 +9354,5 @@ see additional documentation files. |-- usbboot.img
`-- usbimg2disk.sh
-785 directories, 8310 files
+822 directories, 8526 files
diff --git a/RELEASE_NOTES b/RELEASE_NOTES index 229a2d849..eb02035ec 100644 --- a/RELEASE_NOTES +++ b/RELEASE_NOTES @@ -1,140 +1,96 @@ -
-Slackware 13.0 release notes. Tue Aug 25 23:40:18 CDT 2009
-
-Hi folks,
-
- Historically, the RELEASE_NOTES (at least in recent releases)
-had been mostly technical information, but once again Robby Workman
-has covered the important technical details in CHANGES_AND_HINTS.TXT.
-Thanks!
-
- Probably the first thing to mention about the release of
-Slackware 13.0 is that it marks our first release with an official
-64-bit port! Thanks to the hard work of Eric Hameleers, Slackware
-for x86 is available in both 32-bit and 64-bit (x86_64) editions.
-Eric did incredible work on the 64-bit port. The SlackBuild scripts
-were so much of an improvement over the originals from the 32-bit tree
-that they were imported over on the 32-bit side -- the only difference
-in the build trees is whether $ARCH is set to i486 or x86_64. These
-scripts are finding use in other ports too, like Stuart Winter's
-ARMedslack port to the ARM architecture (the ARM Versatile platform
-emulated by QEMU, and the Marvell SheevaPlug), and Mark Post's
-Slack/390 Linux Project for IBM S/390 G2 class systems and above.
-The goal of a unified source tree for these projects seems to be coming
-into focus. For more information about these Slackware ports, see
-http://armedslack.org and http://slack390.org. Getting back to the
-x86_64 port (nicknamed Slackware64), we also have to thank Fred Emmott
-who helped us solve a number of tricky problems having been there
-before -- without his help things like getting ncurses right so that
-the nVidia installer worked, and laying the groundwork for future
-multilib support would have been much more difficult. Thanks Fred!
-
- About the only things to mention here are that Slackware requires
-a recent 2.6.x kernel (I believe 2.6.22.x is a minimum), but
-as usual unless your needs are specific you're probably better off
-running the included kernels that we've tested things against.
-The best kernel to run (even on a one CPU/core machine) is the generic
-SMP one, but that needs an initrd, so be sure to read the instructions
-in /boot after installing with a huge* kernel if you plan to switch.
-We've used the well-tested and recently patched 2.6.29.6 kernel, but
-the 2.6.30.5 kernel is also available as packages in /testing. If
-you decide to give that a try, be sure to read the information about
-LILO in there.
-
- I would not suggest trying to run without udev. Consider it the
-userspace portion of the kernel. It *is* possible, but if you must
-do that you'll have to tweak a couple things here and there. The
-specifics are left as an exercise for the advanced user. Wait, an
-advanced user would just use udev. Really, it works and makes things
-a lot easier.
-
- Another huge change in Slackware 13.0 is the move from KDE3 to
-KDE4. KDE4 has been out for about a year and a half now, and it has
-come a long way since KDE 4.0. The KDE 4.2.4 release included in
-Slackware 13.0 is a very fast and polished desktop. It looks great
-and achieves its goal of making the Linux operating system as nice
-a desktop OS as anything that is available at any price! With KDE3
-pretty much winding down (probably there will not be further releases)
-and projects dropping KDE3 support in favor of KDE4, the time was
-right to make the move to KDE4 in Slackware. I'm using it on all of
-my own machines (including an Intel Atom with compositing enabled),
-and I've really fallen in love with it once I got used to it. The
-tools are integrated better with the desktop, Qt4 seems to be a
-faster and more stable platform, and nearly everything that was
-available for KDE3 has been ported to KDE4 and works great. Huge
-thanks to the KDE team for producing the great desktop environment
-they promised to deliver! As with any major rewrite, there are,
-however, still a few quirks, but these are few and the improvements
-have been coming fast. One of the issues we're aware of is that
-k3b hasn't been working as well as the KDE3 version for some people
-(it works fine here, but we have heard some reports), and there are
-some other KDE applications where people still prefer the old versions.
-To help with this, there are KDE3 compatibility packages that can
-be found in /extra/kde3-compat/. With these installed, most KDE3
-programs will run. A KDE3 version of k3b is also included in that
-directory.
-
- Xfce has been updated as well, and continues to be a great
-lightweight desktop that doesn't get in your way. You'll notice
-improvements in Xfce immediately upon starting it. If you haven't
-looked at this great desktop environment lately, you might want to
-give it another try. Thanks to Robby for tracking the Xfce
-development closely and making sure everything was just exactly
-right in the Slackware Xfce packages.
-
- If you prefer GNOME, there are teams online producing GNOME
-for Slackware. Here are a few places to look:
-
- http://gnomeslackbuild.org
- http://www.droplinegnome.net/
- http://www.gware.org/
-
-If any of these replaces some system components, using them voids
-your warranty. ;-) But it should work, *if* you absolutely must
-have GNOME. I'd suggest Xfce instead if you want a GTK+ based
-desktop. If you do want to use GNOME, remember that there may be
-some updates needed after 13.0 releases, so it might be best not
-to rush into it. Thanks to these teams for making the GNOME
-desktop a viable option for Slackware users.
-
- Need more build scripts? Something that you wanted wasn't
-included in Slackware? Well, then check out slackbuilds.org.
-Several of the team members work on the scripts there.
-
- Thanks to the rest of the team (and other contributors) for
-the great help -- Eric Hameleers for x86_64, help with networking
-improvements, documentation, LVM, the installer, and encrypted
-partition support, Piter Punk for udev and slackpkg work, Stuart
-Winter for help with linuxdoc-tools, Heinz Wiesinger for helping
-to clean up the Qt build script, and other stuff, Erik Jan Tromp
-for updating the populate_tftpboot.sh script in the PXE install
-to work with the new package formats, and instructing us on the
-correct use of umlaut \ö/, Amritpal Bath for coordinating torrents
-for the release, suggesting fixes and improvements, and trying to
-keep me sane (good luck), Robby Workman for docs, X, Xfce, wicd,
-his work with the team at slackbuilds.org, and helping to keep
-tons of other packages updated, mrgoblin for troubleshooting the
-installer and being on call to help in the middle of my night
-(handy having someone from .nz on the team!), and lots of fixes
-here and there, Karl Magnus Kolstoe for letting me know when I
-needed to sleep, NetrixTardis and element-x for helping with
-bandwidth and trackers for the release (and assorted testing and
-Q/A), Fred Emmott for so graciously assisting with obstacles we
-encountered porting to x86_64, and anyone else I'm forgetting
-(including the other team members who contributed little fixes and
-suggestions here and there along with general moral support), and
-all the folks who emailed in bug reports (and especially fixes).
-Thanks for the technical assistance (*you* make this possible),
-and for keeping the project a good time. And, of course, thanks
-*much* to the upstream developers for such nice building materials.
-
-As always, thanks to my wife Andrea for putting up with
-development that began to stretch to every waking hour and
-deadlines being pushed back for one reason or another way too
-many times. We'll try to get a little more family time over
-the next month or so. Hi Briah!
-
-Have fun! :-)
-
-Pat Volkerding <volkerdi@slackware.com>
-
+ +Slackware 13.1 release notes. Wed May 19 04:40:19 UTC 2010 + +Hi folks, + + Historically, the RELEASE_NOTES had been mostly technical +information, but once again Robby Workman has covered the important +technical details in CHANGES_AND_HINTS.TXT. Thanks! If you are +upgrading an existing installation, don't miss the section on the LIBATA +SWITCHOVER. + + I'll mention a few technical items here. Slackware's userspace does +require a recent 2.6.x kernel (I believe 2.6.27.x is a minimum for +udev), and as usual unless your needs are specific you're probably +better off running the included kernels that we've tested things +against. The best kernel to run (even on a one CPU/core machine) is the +generic SMP one, but that needs an initrd, so be sure to read the +instructions in /boot after installing with a huge* kernel if you plan +to switch. We have chosen to use the 2.6.33.4 kernel after testing the +2.6.33.x kernel branch extensively. I would not suggest trying to run +without udev. Consider it the userspace portion of the kernel. It *is* +possible, but if you must do that you'll have to tweak a couple things +here and there. The specifics are left as an exercise for the advanced +user. Wait, an advanced user would just use udev. Really, it works and +makes things a lot easier. + + Slackware 13.1 contains version 4.4.3 of the KDE Software +Compilation. In the nearly 8 months since the release of Slackware +13.0, the KDE team made some huge improvements, including better +handling of netbook screen resolutions, a new authentication framework +based on standards from freedesktop.org, and a new tabbing feature that +allows applications to be grouped in a tabbed interface. You'll notice +a snappier feel, helped also by the improved performance of Qt version +4.6.2. + + Several Xfce components have been updated as well. Xfce continues +to be a great lightweight desktop that doesn't get in your way. If you +haven't looked at this great desktop environment lately, you might want +to give it another try. Thanks to Robby for tracking the Xfce +development closely and making sure everything was just exactly right in +the Slackware Xfce packages. + + If you prefer GNOME, there are teams online producing GNOME for +Slackware. Here are a few places to look: + + http://gnomeslackbuild.org + http://www.droplinegnome.net/ + http://www.gware.org/ + + If any of these replaces some system components, using them voids +your warranty. ;-) But it should work, *if* you absolutely must have +GNOME. I'd suggest Xfce instead if you want a GTK+ based desktop. If +you do want to use GNOME, remember that there may be some updates needed +after 13.1 is released, so it might be best not to rush into it. +Thanks to these teams for making the GNOME desktop a viable option for +Slackware users. + + Need more build scripts? Something that you wanted wasn't included +in Slackware? Well, then check out slackbuilds.org. Several of the team +members work on the scripts there. + + Thanks to the rest of the team (and other contributors) for the +great help -- Eric Hameleers for major work on the KDE SC packages, init +scripts, installer, documentation, and all the extra packages like +multilib compilers (read more here: http://alien.slackbook.org/blog/), +Robby Workman for following X.Org, udev, wicd, xfce, and tons of other +projects, building and testing all that stuff, writing documentation, +his work with the team at slackbuilds.org, and lots of package upgrades +(like the switch to the bluez4 bluetooth stack), Piter Punk for udev and +slackpkg work, updating the shadow password system, writing the initial +patch for polkit to use a shadow authentication backend so we could +consider using KDE 4.4.3, and making tap-to-click work with Synaptics +touchpads out-of-the-box, Stuart Winter for more updates to +linuxdoc-tools, and for all kinds of fixes throughout the installer and +system (he finds my bugs all the time while porting packages to ARM for +the ARMedslack port: http://www.armedslack.org/), Alan Hicks for +testing the installer on Apple hardware, Vincent Batts for keeping Ruby +working well and other miscellaneous fixes, Andrew Psaltis for work on +the polkit/shadow patches, Heinz Wiesinger for Qt (and other) fixes, +Amritpal Bath for various bugfixes and helping with release torrents, +mrgoblin for testing RAID, bluetooth, and well, everything (and fixing a +lot of it, too), other very honorable mentions go to Erik Jan Tromp, +Mark Post, Karl Magnus Kolstoe, Fizban, Fred Emmott, and NetrixTardis, +and anyone else I'm forgetting (including the other team members who +contributed little fixes and suggestions here and there along with +general moral support), and all the folks who emailed in bug reports +(and especially fixes). Thanks for the technical assistance (*you* make +this possible), and for keeping the project a good time. And, of +course, thanks *much* to the upstream developers for such nice building +materials. As always, thanks to my wife Andrea and daughter Briah (who +is becoming a surprisingly good beta tester already!) + +Have fun! + +Pat Volkerding <volkerdi@slackware.com> + diff --git a/Slackware-HOWTO b/Slackware-HOWTO index 1bbfe2f94..98b8bdbc8 100644 --- a/Slackware-HOWTO +++ b/Slackware-HOWTO @@ -1,7 +1,7 @@ Slackware Linux CD-ROM Installation HOWTO
Patrick Volkerding <volkerdi@slackware.com>
-v13.0, 2009-08-25
+v13.1, 2010-05-18
This document covers installation of the Slackware(R) distribution of the
Linux operating system from the Slackware CD-ROM.
@@ -107,8 +107,8 @@ might still be able to install, but if so don't expect the best possible experience.
You also will need some disk space to install Slackware. For a complete
-installation, you'll probably want to devote a 6GB *or larger* partition
-completely to Slackware (you'll need almost 5GB for a full default
+installation, you'll probably want to devote a 10GB *or larger* partition
+completely to Slackware (you'll need almost 6GB for a full default
installation, and then you'll want extra space when you're done).
If you haven't installed Slackware before, you may have to experiment.
If you've got the drive space, more is going to be better than not enough.
@@ -140,35 +140,35 @@ only has the A series installed. Here's an overview of the software categories available for installation, along with the (approximate) amount
of drive space needed to install the entire set:
- A The base Slackware system. (270 MB)
+ A The base Slackware system. (310 MB)
- AP Linux applications. (270 MB)
+ AP Linux applications. (290 MB)
- D Program development tools. (575 MB)
+ D Program development tools. (600 MB)
- E GNU Emacs. (80 MB)
+ E GNU Emacs. (100 MB)
F FAQs and HOWTOs for common tasks. (35 MB)
- K Linux 2.6.29.6 kernel source. (380 MB)
+ K Linux 2.6.33.4 kernel source. (445 MB)
- KDE The K Desktop Environment and applications. (800 MB)
+ KDE The KDE desktop environment and applications. (925 MB)
- KDEI Language support for the K Desktop Environment. (730 MB)
+ KDEI Language support for KDE. (800 MB)
- L System libraries. (840 MB)
+ L System libraries. (950 MB)
- N Networking applications and utilities. (275 MB)
+ N Networking applications and utilities. (325 MB)
T TeX typesetting language. (285 MB)
TCL Tcl/Tk/TclX scripting languages and tools. (15 MB)
- X X Window System graphical user interface. (290 MB)
+ X X Window System graphical user interface. (300 MB)
- XAP Applications for the X Window System. (485 MB)
+ XAP Applications for the X Window System. (490 MB)
- Y Classic text-based BSD games. (5 MB)
+ Y Classic text-based BSD games. (6 MB)
If you have the disk space, we encourage you to do a full installation for
best results. Otherwise, remember that you must install the A set. You
@@ -248,24 +248,34 @@ your machine's CD-ROM drive and reboot to load the disc. You'll get an initial information screen and a prompt (called the "boot:" prompt) at the
bottom of the screen. This is where you'll enter the name of the kernel
that you want to boot with. With most systems you'll want to use the
-default kernel, called huge.s.
+default kernel, called hugesmp.s. Even on a machine with only a single
+one-core processor, it is recommended to use this kernel if your machine
+can run it. Otherwise use the huge.s kernel, which should support any
+486 or better.
-To boot the huge.s kernel, just enter huge.s on the boot prompt:
+To boot the hugesmp.s kernel, just enter hugesmp.s on the boot prompt:
-boot: huge.s
+boot: hugesmp.s
-(actually, since the huge.s kernel is the default, you could have just
-hit ENTER and the machine would go ahead and load the huge.s kernel
+(actually, since the hugesmp.s kernel is the default, you could have just
+hit ENTER and the machine would go ahead and load the hugesmp.s kernel
for you)
+If you've got some non-standard hardware in your machine (or if hugesmp.s
+doesn't work, and you're beginning to suspect you need a different
+kernel), then you'll have to try huge.s. If, for some reason, that still
+will not boot and you know that your hardware should be supported by the
+2.6.33.4 kernel, contact volkerdi at slackware dot com and I will see
+what I can do.
+
These are the kernels shipped in Slackware:
-huge.s This is the default installation kernel. If possible,
+hugesmp.s This is the default installation kernel. If possible,
you can save a bit of RAM later (and some ugly warnings at
boot time or when trying to load modules when the driver is
already built-in) by switching to a generic kernel. In this
- case that would be the generic kernel, which is similar but
+ case that would be gensmp.s, which is a similar kernel but
without filesystems and many of the less common drive
controllers built in. To support these (at the very least
your root filesystem), an initrd (actually an initramfs)
@@ -282,16 +292,31 @@ huge.s This is the default installation kernel. If possible, purposes. It's not impossible though -- think tar to/from a
device such as a USB stick, or leveraging ROMFS.
-speakup.s This is like the huge.s but has support for Speakup and all
- the SCSI, RAID, LVM, and other features of huge.s. There is
- no corresponding generic kernel for speakup.s, but the vanilla
- linux sources may be patched with the speakup sources in
- source/k (this will probably work on any recent kernel).
- After that, whatever customizations are needed should be
- easily adjusted. The speakup.s kernel is used to support
- hardware speech synthesizers as well as software one like
- festival (though these require additional programs that are
- not yet shipped with Slackware).
+gensmp.s The trimmed down, more modular version of hugesmp.s. This
+ can be switched to, after setting up an initrd and
+ reinstalling LILO. It is packaged as a .txz, and can be
+ found on the installed system as:
+ /boot/vmlinuz-generic-smp-2.6.33.4-smp
+
+huge.s This is the 486-compatible single processor version of the
+ hugesmp.s kernel. Try this if hugesmp.s does not work on
+ your machine.
+
+generic.s The trimmed down, more modular version of huge.s. Found on
+ the system as:
+ /boot/vmlinuz-generic-2.6.33.4
+ This also requires using an initrd.
+
+speakup.s This is like the huge.s (486 compatible loaded kernel), but
+ has support for Speakup and all the SCSI, RAID, LVM, and other
+ features of huge.s. There is no corresponding generic kernel
+ for speakup.s, but the vanilla linux sources may be patched
+ with the speakup sources in source/k (this will probably work
+ on any recent kernel). After that, whatever customizations are
+ needed should be easily adjusted. The speakup.s kernel is
+ used to support hardware speech synthesizers as well as
+ software one like festival (though these require additional
+ programs that are not yet shipped with Slackware).
For more information about speakup and its drivers check out:
http://www.linux-speakup.org.
@@ -313,6 +338,14 @@ speakup.s This is like the huge.s but has support for Speakup and all usually seen on Linux.
+Note that if you use the huge (non-SMP kernel) and plan to compile any
+third party kernel modules, you may need to apply the kernel patch in
+/extra/linux-2.6... or, you could just cd to the kernel sources, run
+"make menuconfig", make sure that SMP (and the -smp suffix) are turned
+off, and recompile the kernel with "make". But, that's for later --
+after the install.
+
+
Once you've entered your kernel choice and hit ENTER, the kernel and
install program will load from the DVD or CD-ROM, and you'll arrive at
the Linux login prompt. (You're running Linux now. Congratulations! :-)
@@ -337,10 +370,8 @@ use the Linux version of fdisk. To need to partition a hard drive, you need to specify the
name of the device when you start fdisk. For example:
-fdisk /dev/hda (Repartition the first IDE hard drive)
-fdisk /dev/hdb (Repartition the second IDE hard drive)
-fdisk /dev/sda (Repartition the first SCSI hard drive)
-fdisk /dev/sdb (Repartition the second SCSI hard drive)
+fdisk /dev/sda (Repartition the first hard drive)
+fdisk /dev/sdb (Repartition the second hard drive)
NOTE: If you prefer, you may also try a newer menu-driven version
of Linux fdisk called 'cfdisk'. Rumor has it that MOST people do
@@ -352,12 +383,12 @@ at your existing partition table with the 'p' command: Command (m for help): p
-Disk /dev/hda: 40.0 GB, 40020664320 bytes
+Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
-/dev/hda1 * 1 2423 19462716 c W95 FAT32 (LBA)
+/dev/sda1 * 1 2423 19462716 c W95 FAT32 (LBA)
Here we can see that there is one DOS partition on the drive already,
@@ -434,14 +465,14 @@ you're satisfied with them: Command (m for help): p
-Disk /dev/hda: 40.0 GB, 40020664320 bytes
+Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
-/dev/hda1 1 2423 19462716+ c W95 FAT32 (LBA)
-/dev/hda2 2424 4700 18720732 83 Linux
-/dev/hda3 4701 4865 1317332 82 Linux swap
+/dev/sda1 1 2423 19462716+ c W95 FAT32 (LBA)
+/dev/sda2 2424 4700 18720732 83 Linux
+/dev/sda3 4701 4865 1317332 82 Linux swap
This looks good, so we'll use the "w" command to write the data out to the
drive's partition table. If you want to exit without updating the
@@ -504,14 +535,14 @@ program to list your partitions like this: # fdisk -l
- Disk /dev/hda: 40.0 GB, 40020664320 bytes
+ Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
- /dev/hda1 1 2423 19462716+ c W95 FAT32 (LBA)
- /dev/hda2 2424 4700 18720732 83 Linux
- /dev/hda3 4701 4865 1317332 82 Linux
+ /dev/sda1 1 2423 19462716+ c W95 FAT32 (LBA)
+ /dev/sda2 2424 4700 18720732 83 Linux
+ /dev/sda3 4701 4865 1317332 82 Linux
In this case, if /dev/sda3 is meant to be a Linux swap partition, you'll
need to start fdisk on drive /dev/sda:
@@ -581,8 +612,8 @@ you'd like to put the partition in your directory tree. MS-DOS/Windows assigns a letter such as A:, B:, C:, etc, to each device.
Unlike DOS, Linux makes your devices visible somewhere under the root
-directory (/). You might have /dev/hda1 for your root partition (/) and
-put /dev/hda2 somewhere underneath it, such as under your /home directory.
+directory (/). You might have /dev/sda1 for your root partition (/) and
+put /dev/sda2 somewhere underneath it, such as under your /home directory.
When prompted for a mount location, just enter a directory such as /home,
and hit enter. As you format each additional partition and place it in
the filesystem tree, you'll be returned to the partition selection menu.
@@ -607,7 +638,7 @@ or pick manually from a list. (unless you're trying to show off to your friends, go ahead and let setup scan for the CD-ROM drive automatically).
Setup will then try to access the Slackware CD-ROM. If this is
successful, setup will tell you that it found and mounted a CD-ROM on a
-Linux device such as /dev/hdc. If the CD-ROM was successful found, you
+Linux device such as /dev/sr0. If the CD-ROM was successful found, you
may skip ahead to the SELECT section below, otherwise read on for some
CD-ROM troubleshooting tips.
@@ -975,12 +1006,12 @@ darkstar login: Log into the new system as "root".
- Welcome to Linux 2.6.29.6.
+ Welcome to Linux 2.6.33.4.
darkstar login: root
- Last login: Sun Aug 23 18:33:01 -0500 2009 on tty3.
+ Last login: Tue May 18 15:36:23 2010 on tty3.
- Linux 2.6.29.6.
+ Linux 2.6.33.4.
You have new mail.
darkstar: ~#
diff --git a/UPGRADE.TXT b/UPGRADE.TXT new file mode 100644 index 000000000..afdc3d9b7 --- /dev/null +++ b/UPGRADE.TXT @@ -0,0 +1,171 @@ +
+Slackware 13.0 to 13.1 Upgrade HOWTO <volkerdi@slackware.com>
+
+This document explains how to upgrade from Slackware 13.0 to Slackware 13.1.
+
+----------------------------------------------------------------------------
+
+For details of important changes from Slackware 13.0 to 13.1, see the file
+'CHANGES_AND_HINTS.TXT'. Thanks to Robby Workman for help with this.
+If you have partitions in /etc/fstab named /dev/hd*, please take special
+note of the instructions for the changeover to /dev/sd* devices or your
+machine will not reboot correctly.
+
+Before you begin, I would strongly recommend making a backup of your
+system, or, if not the entire system, at least the /etc directory. You
+might find that you need to refer to a few things after the upgrade
+process is complete. Back it up, or take your chances.
+
+OK, now that everything is safely backed up, let's proceed. :-)
+
+To do this, you'll need the Slackware 13.1 packages. If these are on a CD,
+create a new directory to mount the CD on so that it doesn't get in the way
+during the upgrade:
+
+mkdir /packages
+mount /dev/cdrom /packages
+
+The packages don't have to be on a CD-ROM, as an alternative you could
+copy the slackware directory (the one with the various package
+subdirectories in it, basically the "slackware" or "slackware64" directory
+from the install disc) to someplace like /root/slackware/. The important thing
+is that you know where the slackware packages directory is. We'll use
+/root/slackware in the following examples.
+
+
+0. Put your machine in single-user mode:
+ telinit 1
+
+ Note that this is _not_ strictly required, and there have been reports
+ of success remotely upgrading machines that are still in multiuser
+ mode. However, more things can go wrong in multiuser, so especially
+ if you're considering a remote upgrade in multiuser mode, you might
+ want to clone the machine locally so that you can do a test run to
+ uncover any problem areas and come up with workarounds for them.
+
+
+1. Upgrade your package utilities and related tools:
+
+ upgradepkg /root/slackware/a/pkgtools-*.tgz
+ upgradepkg /root/slackware/a/tar-*.tgz
+ installpkg /root/slackware/a/xz-*.tgz
+ upgradepkg /root/slackware/a/findutils-*.txz
+
+
+2. Upgrade your glibc shared libraries. This is important, or things
+ might go haywire during the next part of the upgrade:
+
+ upgradepkg /root/slackware/a/glibc-solibs-*.t?z
+
+
+3. Upgrade everything else (and install new packages):
+
+ upgradepkg --install-new /root/slackware/*/*.t?z
+
+ If you wish to upgrade everything except for the KDEI language
+ packs for KDE (these take a lot of space and can be dealt with
+ after the main upgrade more quickly and easily), running this
+ script in the "slackware" directory will do the trick:
+
+ #!/bin/sh
+ for dir in a ap d e f k kde l n t tcl x xap y ; do
+ ( cd $dir ; upgradepkg --install-new *.t?z )
+ done
+
+
+4. Remove obsolete packages. The CHANGES_AND_HINTS.TXT file should have a
+ list of these. You may also wish to go into /var/log/packages and take
+ a look at the package list:
+
+ ls -lt | less
+
+ You may spot some old, obsolete, or discontinued packages. If so,
+ you can remove these using 'removepkg'. This command will get rid of
+ the packages which became obsolete since Slackware 13.0:
+
+ removepkg bluez-libs bluez-utils cupsddk device-mapper epic4 gqview \
+ kdelibs-experimental lbxproxy libgtkhtml liblbxutil libungif \
+ libv4l loadlin mpg321 mplayerthumbs proxymngr xf86-input-citron \
+ xf86-input-elographics xf86-input-fpit xf86-input-hyperpen \
+ xf86-input-mutouch xf86-video-newport xf86-video-xgixp
+
+
+5. Fix your config files. Some of the config files in /etc are going to
+ need your attention. You'll find the new incoming config files on
+ your system with the ".new" extension. You may need to fill these in
+ with information from your old config files and then move them over.
+
+ Feel brave? You can use this little script to install most of the
+ .new config files in /etc. If you've made any local changes you'll
+ need to add them to the newly installed files. Your old config files
+ will be copied to *.bak. Anyway, it might be an easier starting
+ point. Here it is:
+
+ #!/bin/sh
+ cd /etc
+ find . -name "*.new" | while read configfile ; do
+ if [ ! "$configfile" = "./rc.d/rc.inet1.conf.new" \
+ -a ! "$configfile" = "./rc.d/rc.local.new" \
+ -a ! "$configfile" = "./group.new" \
+ -a ! "$configfile" = "./passwd.new" \
+ -a ! "$configfile" = "./shadow.new" ]; then
+ cp -a $(echo $configfile | rev | cut -f 2- -d . | rev) \
+ $(echo $configfile | rev | cut -f 2- -d . | rev).bak 2> /dev/null
+ mv $configfile $(echo $configfile | rev | cut -f 2- -d . | rev)
+ fi
+ done
+
+ You might also wish to move these config files over:
+
+ /usr/man/man.conf.new
+ /usr/share/vim/vimrc.new
+
+
+6. If you use a non-en_US language pack for KDE and you already have it
+ installed, then you may upgrade it by moving into the slackware/kdei
+ directory and using this command:
+
+ upgradepkg --install-new k*<your KDE locale>*t?z
+
+ To have upgradepkg cycle through all of the available packages, and
+ see which ones need to be upgraded, use this in slackware/kdei:
+
+ upgradepkg *t?z
+
+ If your language has been added to KDE since Slackware 13.0, you'll
+ need to install it using installpkg, or upgradepkg --install-new.
+
+ Typically you'll need to make sure that you have installed the
+ slackware/kdei packages for kde, koffice, and k3b (if you use those).
+
+
+7. IMPORTANT! *Before* attempting to reboot your system, you will need
+ to make sure that the bootloader has been updated for the new kernel!
+ First, be sure your initrd is up to date (if you use one). If you
+ use LILO, make sure the paths in /etc/lilo.conf point to a valid
+ kernel and then type 'lilo' to reinstall LILO. If you use a USB memory
+ stick to boot, copy the new kernel to it in place of the old one.
+
+ If you were using devices such as /dev/hda (IDE hard drive) with
+ Slackware 13.0, you will need to consider how to switch over to the
+ new /dev/sda type device names. See CHANGES_AND_HINTS.TXT for complete
+ instructions on how to do this. If you have not read this yet, now
+ is a great time to go look at that. Forget about step 8 and 9 and
+ just go complete that part of the upgrade and you'll be good to go.
+
+
+8. Return to multi-user mode:
+ telinit 3
+
+
+9. Reboot to start using the new kernel.
+
+
+At this point you should be running Slackware 13.1. :-)
+
+I wish everyone good luck with this!
+
+---
+Patrick Volkerding
+volkerdi@slackware.com
+
diff --git a/extra/source/bash-completion/bash-completion-1.1-pkgtools_tgxz.diff b/extra/source/bash-completion/bash-completion-1.1-pkgtools_tgxz.diff new file mode 100644 index 000000000..803f59918 --- /dev/null +++ b/extra/source/bash-completion/bash-completion-1.1-pkgtools_tgxz.diff @@ -0,0 +1,12 @@ +diff -Nur bash-completion-1.1.orig//contrib/pkgtools bash-completion-1.1//contrib/pkgtools +--- bash-completion-1.1.orig//contrib/pkgtools 2009-10-09 07:49:31.000000000 -0500 ++++ bash-completion-1.1//contrib/pkgtools 2010-03-06 21:56:50.343715164 -0600 +@@ -11,7 +11,7 @@ + COMPREPLY=( $( (cd /var/log/packages; compgen -f -- "$cur") ) ) + } && + complete -F _removepkg $filenames removepkg && +- complete $dirnames -f -X '!*.tgz' installpkg upgradepkg explodepkg ++ complete $dirnames -f -X '!*.t[gx]z' installpkg upgradepkg explodepkg + + # Local variables: + # mode: shell-script diff --git a/extra/source/bash-completion/bash-completion-xz.diff b/extra/source/bash-completion/bash-completion-xz.diff deleted file mode 100644 index 3098aed16..000000000 --- a/extra/source/bash-completion/bash-completion-xz.diff +++ /dev/null @@ -1,23 +0,0 @@ -diff -ur a/bash_completion b/bash_completion ---- a/bash_completion 2006-03-01 16:20:18.000000000 +0000 -+++ b/bash_completion 2009-07-15 22:46:27.000000000 +0100 -@@ -2852,8 +2852,8 @@ - return 0 - ;; - +([^IZzjy])f) -- ext='t@(ar?(.@(Z|gz|bz?(2)))|gz|bz?(2))' -- regex='t\(ar\(\.\(Z\|gz\|bz2\?\)\)\?\|gz\|bz2\?\)' -+ ext='t@(ar?(.@(Z|xz|gz|bz?(2)))|xz|gz|bz?(2))' -+ regex='t\(ar\(\.\(Z\|xz\|gz\|bz2\?\)\)\?\|xz\|gz\|bz2\?\)' - ;; - *[Zz]*f) - ext='t?(ar.)@(gz|Z)' -@@ -5519,7 +5519,7 @@ - COMPREPLY=( $( (cd /var/log/packages; compgen -f -- "$cur") ) ) - } && - complete -F _removepkg $filenames removepkg && -- complete $dirnames -f -X '!*.tgz' installpkg upgradepkg explodepkg -+ complete $dirnames -f -X '!*.t?z' installpkg upgradepkg explodepkg - - # look(1) completion - # diff --git a/extra/source/bash-completion/bash-completion.SlackBuild b/extra/source/bash-completion/bash-completion.SlackBuild index 153853dc2..3fb915c02 100755 --- a/extra/source/bash-completion/bash-completion.SlackBuild +++ b/extra/source/bash-completion/bash-completion.SlackBuild @@ -1,50 +1,80 @@ #!/bin/sh -# Set initial variables: -CWD=`pwd` -if [ "$TMP" = "" ]; then - TMP=/tmp -fi -PKG=$TMP/package-bash-completion -VERSION=20060301 +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# Slackware build script for bash-completion + +VERSION=1.1 ARCH=noarch -BUILD=2 +BUILD=${BUILD:-3} -if [ ! -d $TMP ]; then - mkdir -p $TMP # location to build the source -fi -rm -rf $PKG -mkdir -p $PKG +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-bash-completion +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP -rm -rf bash_completion -tar xjvf $CWD/bash-completion-$VERSION.tar.bz2 -cd bash_completion - -# Add support for xz file formats: -zcat $CWD/bash-completion-xz.diff.gz | patch -p1 || exit 1 - -mkdir -p $PKG/etc/bash_completion.d $PKG/etc/profile.d -cp -a $CWD/bash_completion.sh.gz $PKG/etc/profile.d -gzip -d $PKG/etc/profile.d/bash_completion.sh.gz -chmod 755 $PKG/etc/profile.d/bash_completion.sh -cp -a bash_completion $PKG/etc -chmod 644 $PKG/etc/bash_completion -cp -a contrib/* $PKG/etc/bash_completion.d -chmod 755 $PKG/etc/bash_completion.d/* +rm -rf bash-completion-$VERSION +tar xvf $CWD/bash-completion-$VERSION.tar.?z* +cd bash-completion-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Add support for txz packages instead of only tgz +zcat $CWD/bash-completion-1.1-pkgtools_tgxz.diff.gz | patch -p1 || exit 1 + +./configure \ + --prefix=/usr \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/bash_completion-$VERSION + +make || exit 1 +make install DESTDIR=$PKG || exit 1 + +mkdir -p $PKG/etc/profile.d +zcat $CWD/bash_completion.sh.gz > $PKG/etc/profile.d/bash_completion.sh +chmod 0755 $PKG/etc/profile.d/bash_completion.sh + mkdir -p $PKG/usr/doc/bash-completion-$VERSION -cp -a BUGS COPYING README $PKG/usr/doc/bash-completion-$VERSION -chmod 644 $PKG/usr/doc/bash-completion-$VERSION/* -( cd $PKG ; chown -R root.root . ) +cp -a \ + AUTHORS COPYING README TODO \ + $PKG/usr/doc/bash-completion-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -# Build the package: cd $PKG -makepkg -l y -c n $TMP/bash-completion-$VERSION-$ARCH-$BUILD.txz - -# Clean up the extra stuff: -if [ "$1" = "--cleanup" ]; then - rm -rf $TMP/bash_completion - rm -rf $PKG -fi +/sbin/makepkg -l y -c n $TMP/bash-completion-$VERSION-$ARCH-$BUILD.txz diff --git a/extra/source/bash-completion/bash_completion.sh b/extra/source/bash-completion/bash_completion.sh index 84388cb8a..4f2cdf824 100644 --- a/extra/source/bash-completion/bash_completion.sh +++ b/extra/source/bash-completion/bash_completion.sh @@ -3,7 +3,7 @@ if [ "$PS1" ] && [ $bmajor -eq 2 ] && [ $bminor '>' 04 ] \ && [ -f /etc/bash_completion ]; then # interactive shell # Source completion code . /etc/bash_completion -elif [ "$PS1" ] && [ $bmajor -eq 3 ] \ +elif [ "$PS1" ] && [ $bmajor -ge 3 ] \ && [ -f /etc/bash_completion ]; then # interactive shell # Source completion code . /etc/bash_completion diff --git a/extra/source/bash-completion/slack-desc b/extra/source/bash-completion/slack-desc index b4ffbd4f4..12687b698 100644 --- a/extra/source/bash-completion/slack-desc +++ b/extra/source/bash-completion/slack-desc @@ -15,5 +15,5 @@ bash-completion: installed, you may get a list of all commands that have associa bash-completion: completions with 'complete -p', and examine the code for the shell bash-completion: functions with 'declare -f'. bash-completion: -bash-completion: bash-completion was written by Ian Macdonald <ian@caliban.org>. +bash-completion: Homepage: https://alioth.debian.org/projects/bash-completion/ bash-completion: diff --git a/extra/source/bittornado/bittornado.SlackBuild b/extra/source/bittornado/bittornado.SlackBuild new file mode 100755 index 000000000..e6551c630 --- /dev/null +++ b/extra/source/bittornado/bittornado.SlackBuild @@ -0,0 +1,38 @@ +#!/bin/sh +CWD=`pwd` +PKG=/tmp/package-bittornado + +VERSION=0.3.18 +ARCH=noarch +BUILD=2 + +rm -rf $PKG +mkdir -p $PKG + +cd /tmp +rm -rf BitTornado-CVS +tar xjvf $CWD/BitTornado-$VERSION.tar.bz2 +cd BitTornado-CVS +chown -R root.root . +find . -perm 775 -exec chmod 755 {} \; +find . -perm 664 -exec chmod 644 {} \; +python setup.py build install --root=$PKG +# Add btdownloadxterm.sh (this just opens an xterm for btdownloadcurses.py so +# that it can work as a MIME handler from mailcap): +mkdir -p $PKG/usr/bin +zcat $CWD/btdownloadxterm.sh > $PKG/usr/bin/btdownloadxterm.sh +chmod 755 $PKG/usr/bin/btdownloadxterm.sh +chown -R root.bin $PKG/usr/bin +mkdir -p $PKG/usr/doc/BitTornado-$VERSION +cp -a \ + LICENSE.txt README.txt \ + docs/*.* \ + $PKG/usr/doc/BitTornado-$VERSION +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +# Add support for using btdownloadcurses.py instead of btdownloadgui.py in /etc/mailcap: +zcat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +makepkg -l y -c n ../bittornado-$VERSION-$ARCH-$BUILD.txz + diff --git a/extra/source/bittornado/btdownloadxterm.sh b/extra/source/bittornado/btdownloadxterm.sh new file mode 100644 index 000000000..49c687735 --- /dev/null +++ b/extra/source/bittornado/btdownloadxterm.sh @@ -0,0 +1,36 @@ +#!/bin/sh +# Copyright 2003 Slackware Linux, Inc., Concord, CA, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# /usr/bin/btdownloadxterm.sh +# A simple script used in /etc/mailcap to enable using +# btdownloadcurses.py with Mozilla, etc. +# +# This goes in /etc/mailcap: +#application/x-bittorrent; /usr/bin/btdownloadxterm.sh '%s' ; + +# Create a directory for downloads: +if [ ! -d $HOME/BitTorrent ]; then + mkdir -p $HOME/BitTorrent +fi + +# Change to the download directory and start BitTorrent there: +cd $HOME/BitTorrent && exec /usr/X11R6/bin/xterm -e /usr/bin/btdownloadcurses.py "$1" + diff --git a/extra/source/bittornado/doinst.sh b/extra/source/bittornado/doinst.sh new file mode 100644 index 000000000..51164b367 --- /dev/null +++ b/extra/source/bittornado/doinst.sh @@ -0,0 +1,17 @@ +# Add bittorrent support to /etc/mailcap unless it's found there +# already (commented out, or not): +if ! grep application/x-bittorrent etc/mailcap 1> /dev/null 2> /dev/null ; then + echo "application/x-bittorrent; /usr/bin/btdownloadxterm.sh '%s' ; " >> etc/mailcap +fi + + +# Add bittornado support to /etc/mailcap unless it's found there +# already (commented out, or not): +if ! grep application/x-bittorrent etc/mailcap 1> /dev/null 2> /dev/null ; then + echo "application/x-bittorrent; /usr/bin/btdownloadxterm.sh '%s' ; " >> etc/mailcap +else + # If it calls bittorrent-xterm, make btdownloadxterm.sh the default instead: + if grep bittorrent-xterm etc/mailcap 1> /dev/null 2> /dev/null ; then + sed -i -e 's/bittorrent-xterm/btdownloadxterm.sh/g' etc/mailcap + fi +fi diff --git a/source/l/libgtkhtml/slack-desc b/extra/source/bittornado/slack-desc index 22d68c5b3..6e156cadd 100644 --- a/source/l/libgtkhtml/slack-desc +++ b/extra/source/bittornado/slack-desc @@ -6,14 +6,14 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -libgtkhtml: libgtkhtml (lightweight HTML engine) -libgtkhtml: -libgtkhtml: GtkHTML is a lightweight HTML rendering/printing/editing engine. It -libgtkhtml: was originally based on KHTMLW, part of the KDE project. -libgtkhtml: -libgtkhtml: libgtkhtml is used by the GIMP help browser. -libgtkhtml: -libgtkhtml: -libgtkhtml: -libgtkhtml: -libgtkhtml: +bittornado: BitTornado (a modified version of the BitTorrent utility) +bittornado: +bittornado: BitTornado is a file distribution utility which utilizes the upload +bittornado: capacity of machines which are downloading a file to help distribute +bittornado: it to other downloading machines. +bittornado: +bittornado: BitTornado is TheSHAD0W's experimental version of Bram Cohen's +bittornado: BitTorrent utility. +bittornado: +bittornado: +bittornado: diff --git a/extra/source/brltty/brltty.SlackBuild b/extra/source/brltty/brltty.SlackBuild index c58959746..31d6fc1fb 100755 --- a/extra/source/brltty/brltty.SlackBuild +++ b/extra/source/brltty/brltty.SlackBuild @@ -1,4 +1,25 @@ #!/bin/sh +# +# Copyright 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + # Set initial variables: CWD=`pwd` if [ "$TMP" = "" ]; then @@ -9,10 +30,19 @@ if [ ! -d $TMP ]; then fi PKG=/tmp/package-brltty -VERSION=4.0 -ARCH=${ARCH:-x86_64} +VERSION=4.2 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -23,7 +53,7 @@ rm -rf $PKG mkdir -p $PKG cd $TMP rm -rf brltty-$VERSION -tar xf $CWD/brltty-$VERSION.tar.?z* || exit 1 +tar xvf $CWD/brltty-$VERSION.tar.?z* || exit 1 cd brltty-$VERSION sh autogen @@ -64,6 +94,14 @@ cat Documents/ChangeLog | head -n 150 > $PKG/usr/doc/brltty-$VERSION/ChangeLog find . -size 0 -type f -exec rm -f {} \; ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r Documents/ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat Documents/ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r Documents/ChangeLog $DOCSDIR/ChangeLog +fi + gzip -9 $PKG/usr/man/man?/*.? mkdir -p $PKG/etc diff --git a/extra/source/emacspeak/emacspeak-32.0.tcl8.5.diff b/extra/source/emacspeak/emacspeak-32.0.tcl8.5.diff new file mode 100644 index 000000000..414018925 --- /dev/null +++ b/extra/source/emacspeak/emacspeak-32.0.tcl8.5.diff @@ -0,0 +1,36 @@ +diff -u -r emacspeak-32.0.orig/servers/linux-espeak/Makefile emacspeak-32.0/servers/linux-espeak/Makefile +--- emacspeak-32.0.orig/servers/linux-espeak/Makefile 2009-08-26 12:19:01.000000000 -0500 ++++ emacspeak-32.0/servers/linux-espeak/Makefile 2010-05-13 17:17:12.000000000 -0500 +@@ -4,7 +4,7 @@ + PREFIX = /usr + LIBPARENTDIR = ${PREFIX}/share/emacs/site-lisp + LIBDIR =$(LIBPARENTDIR)/emacspeak/servers/linux-espeak +-TCL_VERSION = 8.4 ++TCL_VERSION = 8.5 + TCL_INCLUDE= /usr/include/tcl$(TCL_VERSION) + CXXFLAGS+= -g -O2 -fPIC -DPIC -pedantic -ansi -Wall -Wno-long-long -I$(TCL_INCLUDE) + +diff -u -r emacspeak-32.0.orig/servers/linux-outloud/Makefile emacspeak-32.0/servers/linux-outloud/Makefile +--- emacspeak-32.0.orig/servers/linux-outloud/Makefile 2009-08-28 16:07:35.000000000 -0500 ++++ emacspeak-32.0/servers/linux-outloud/Makefile 2010-05-13 17:17:18.000000000 -0500 +@@ -5,7 +5,7 @@ + LIBPARENTDIR = ${PREFIX}/share/emacs/site-lisp + LIBDIR =$(LIBPARENTDIR)/emacspeak/servers/linux-outloud + +-TCL_VERSION=8.4 ++TCL_VERSION=8.5 + TCL_INCLUDE=/usr/include/tcl$(TCL_VERSION) + CFLAGS+= -g -O2 -fPIC -DPIC -pedantic -ansi -Wall -Wno-long-long -I$(TCL_INCLUDE) + CXXFLAGS+= $(CFLAGS) +diff -u -r emacspeak-32.0.orig/servers/software-dtk/Makefile emacspeak-32.0/servers/software-dtk/Makefile +--- emacspeak-32.0.orig/servers/software-dtk/Makefile 2009-08-28 16:07:35.000000000 -0500 ++++ emacspeak-32.0/servers/software-dtk/Makefile 2010-05-13 17:17:46.000000000 -0500 +@@ -2,7 +2,7 @@ + # + LABEL=1.1 + DIST=software-dtk-$(LABEL) +-TCL_VERSION=8.4 ++TCL_VERSION=8.5 + CFLAGS+=-O3 -fpic -pedantic -ansi -Wall -I/usr/include/tcl$(TCL_VERSION) + CPPFLAGS+=-DSTDC_HEADERS=1 -Dclock_t=long -DRETSIGTYPE=void + INSTALL=install diff --git a/source/kde/mplayerthumbs/mplayerthumbs.SlackBuild b/extra/source/emacspeak/emacspeak.SlackBuild index 959802729..3235c94c5 100755 --- a/source/kde/mplayerthumbs/mplayerthumbs.SlackBuild +++ b/extra/source/emacspeak/emacspeak.SlackBuild @@ -1,5 +1,5 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,19 @@ CWD=$(pwd) -PKGNAM=mplayerthumbs -VERSION=${VERSION:-1.2} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} -NUMJOBS=${NUMJOBS:--j4} +PKGNAM=emacspeak +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$TMP" = "" ]; then TMP=/tmp @@ -42,13 +50,15 @@ elif [ "$ARCH" = "i486" ]; then elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" + SLKCFLAGS="-O2" +else + SLKCFLAGS="-O2" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.gz -cd ${PKGNAM}-$VERSION +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . @@ -64,19 +74,30 @@ find . -perm 511 -exec chmod 755 {} \; find . -perm 711 -exec chmod 755 {} \; find . -perm 555 -exec chmod 755 {} \; -mkdir -p build -cd build - cmake \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DSYSCONF_INSTALL_DIR=/etc/kde \ - .. - make $NUMJOBS || exit 1 - make install DESTDIR=$PKG || exit 1 -cd - +# Patch to use Tcl 8.5: +zcat $CWD/emacspeak-32.0.tcl8.5.diff.gz | patch -p1 || exit 1 + +# Compile the main program against Emacs: +make config +make emacspeak + +# Install: +make prefix=$PKG/usr install || exit 1 + +# Build the linux-outload server: +( cd $PKG/usr/share/emacs/site-lisp/emacspeak/servers/linux-outloud + CFLAGS="$SLKCFLAGS" make + rm -f *.o +) + +# Fix path in emacspeak: +( cd $PKG/usr/bin + cat emacspeak | sed -e "s/\/tmp\/package-emacspeak//" > $TMP/emacspeak-filtered + cat $TMP/emacspeak-filtered > emacspeak + rm -f $TMP/emacspeak-filtered +) + +mv $PKG/usr/share/info $PKG/usr # Strip binaries: ( cd $PKG @@ -109,9 +130,17 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION -cp -a \ - AUTHORS COPYING* ChangeLog INSTALL NEWS README* TODO \ - $PKG/usr/doc/${PKGNAM}-$VERSION +( cd $PKG/usr/doc/${PKGNAM}-$VERSION + ln -sf /usr/share/emacs/site-lisp/emacspeak/etc . + ln -sf /usr/share/emacs/site-lisp/emacspeak/install-guide . + ln -sf /usr/share/emacs/site-lisp/emacspeak/user-guide . + ln -sf etc/COPYRIGHT . + ln -sf etc/FAQ . + ln -sf etc/HELP . + ln -sf etc/NEWS . + ln -sf etc/applications.html . + ln -sf etc/remote.txt . +) mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/extra/source/emacspeak/slack-desc b/extra/source/emacspeak/slack-desc new file mode 100644 index 000000000..c8a6db3a1 --- /dev/null +++ b/extra/source/emacspeak/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' on +# the right side marks the last column you can put a character in. You must make +# exactly 11 lines for the formatting to be correct. It's also customary to +# leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +emacspeak: emacspeak (Emacs speech interface) +emacspeak: +emacspeak: Emacspeak is a speech interface that allows visually impaired users to +emacspeak: interact independently and efficiently with the computer. By +emacspeak: seamlessly blending all aspects of the Internet such as Web-surfing +emacspeak: and messaging, Emacspeak speech-enables local and remote information +emacspeak: via a consistent and well-integrated user interface. Emacspeak has +emacspeak: dramatically changed how the author, T. V. Raman, and hundreds of +emacspeak: blind and visually impaired users around the world interact with the +emacspeak: personal computer and the Internet. +emacspeak: diff --git a/extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild b/extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild index 1904ec59f..24ce32a5d 100755 --- a/extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild +++ b/extra/source/flashplayer-plugin/flashplayer-plugin.SlackBuild @@ -37,6 +37,8 @@ # * Update (plugs vulnerability). # 10.0.32.18-1: 10/aug/2009 by Patrick J. Volkerding <volkerdi@slackware.com> # * Update (plugs vulnerability). +# 10.0.42.34-1: 14/dec/2009 by Patrick J. Volkerding <volkerdi@slackware.com> +# * Update (plugs vulnerability). # # Run 'sh flashplayer-plugin.SlackBuild' to build a Slackware package. # The package (.txz) and .txt file as well as build logs are created in /tmp . @@ -47,7 +49,7 @@ # Set initial variables: PRGNAM=flashplayer-plugin -VERSION=${VERSION:-10.0.32.18} +VERSION=${VERSION:-10.0.42.34} ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} diff --git a/extra/source/jdk-6/COPYRIGHT b/extra/source/jdk-6/COPYRIGHT index 2ae212072..ee5019b5c 100644 --- a/extra/source/jdk-6/COPYRIGHT +++ b/extra/source/jdk-6/COPYRIGHT @@ -1,4 +1,4 @@ -Copyright © 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, +Copyright © 2010 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual property rights relating to @@ -33,7 +33,7 @@ identified on U.S. export exclusion lists, including, but not limited to, the denied persons and specially designated nationals lists is strictly prohibited. -Copyright © 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, +Copyright © 2010 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, Etats-Unis. Tous droits rservs. Sun Microsystems, Inc. dtient les droits de proprit intellectuele diff --git a/extra/source/jdk-6/HOWTO-BUILD-TXZ b/extra/source/jdk-6/HOWTO-BUILD-TXZ index 389b26891..18f07e937 100644 --- a/extra/source/jdk-6/HOWTO-BUILD-TXZ +++ b/extra/source/jdk-6/HOWTO-BUILD-TXZ @@ -1,4 +1,4 @@ -1. Download the file jdk-6u14-linux-i586.bin from +1. Download the file jdk-6u20-linux-i586.bin from java.sun.com and put it in the directory. 2. Run jdk.SlackBuild to package it as an installable diff --git a/extra/source/jdk-6/README.html b/extra/source/jdk-6/README.html index 600209cab..5b784f959 100644 --- a/extra/source/jdk-6/README.html +++ b/extra/source/jdk-6/README.html @@ -704,7 +704,7 @@ include Java DB in the ${JAVA_HOME}/db directory. Kit (JDK<sup><font size="-2">TM</font></sup>) is a product of Sun Microsystems<sup><font size="-2">TM</font></sup>, Inc.<br> <br> - Copyright © 2009 Sun Microsystems, Inc.<br> + Copyright © 2010 Sun Microsystems, Inc.<br> 4150 Network Circle, Santa Clara, California 95054, U.S.A.<br> All rights reserved.</font></p> <script type="text/javascript" language="JavaScript" src="/js/omi/jsc/s_code_remote.js"> diff --git a/extra/source/jdk-6/README_ja.html b/extra/source/jdk-6/README_ja.html index c21e5de24..363acb05d 100644 --- a/extra/source/jdk-6/README_ja.html +++ b/extra/source/jdk-6/README_ja.html @@ -430,7 +430,7 @@ JDK ¤ÎºÆÇÛÉÛ¤«¤éǤ°Õ¤Ç½ü³°¤Ç¤¤ë¥Õ¥¡¥¤¥ë¤ª¤è¤Ó¥Ç¥£¥ì¥¯¥È¥ê¤ò¼¡¤Ë¼¨¤·¤Þ¤¹¡£¤³¤ì¤é </dl> <hr> -<p><font size="2">Java<sup><font size="-2">TM</font></sup> Development Kit (JDK<sup><font size="-2">TM</font></sup>) ¤Ï Sun Microsystems<sup><small>TM</small></sup>, Inc. ¤ÎÀ½ÉʤǤ¹¡£<br> <br> Copyright © 2009 Sun Microsystems, Inc.<br> 4150 Network Circle, Santa Clara, California 95054, U.S.A.<br> All rights reserved.</font></p> +<p><font size="2">Java<sup><font size="-2">TM</font></sup> Development Kit (JDK<sup><font size="-2">TM</font></sup>) ¤Ï Sun Microsystems<sup><small>TM</small></sup>, Inc. ¤ÎÀ½ÉʤǤ¹¡£<br> <br> Copyright © 2010 Sun Microsystems, Inc.<br> 4150 Network Circle, Santa Clara, California 95054, U.S.A.<br> All rights reserved.</font></p> <script type="text/javascript" language="JavaScript" src="/js/omi/jsc/s_code_remote.js"> </script> </body> diff --git a/extra/source/jdk-6/README_zh_CN.html b/extra/source/jdk-6/README_zh_CN.html index e3b943e2e..a09bf21b0 100644 --- a/extra/source/jdk-6/README_zh_CN.html +++ b/extra/source/jdk-6/README_zh_CN.html @@ -500,7 +500,7 @@ Jconsole Ó¦ÓóÌÐòÒªÇóʹÓö¯Ì¬Á¬½Ó»úÖÆ¡£</dd> </dl> <hr> -<p><font size="2">Java<sup><font size="-2">TM</font></sup> Development Kit (JDK<sup><font size="-2">TM</font></sup>) ÊÇ Sun Microsystems<sup><font size="-2">TM</font></sup>, Inc. µÄ²úÆ·¡£<br> <br> °æȨËùÓÐ (C) 2009 Sun Microsystems, Inc.<br> 4150 Network Circle, Santa Clara, California 95054, U.S.A.<br> ±£ÁôËùÓÐȨÀû¡£</font></p> +<p><font size="2">Java<sup><font size="-2">TM</font></sup> Development Kit (JDK<sup><font size="-2">TM</font></sup>) ÊÇ Sun Microsystems<sup><font size="-2">TM</font></sup>, Inc. µÄ²úÆ·¡£<br> <br> °æȨËùÓÐ (C) 2010 Sun Microsystems, Inc.<br> 4150 Network Circle, Santa Clara, California 95054, U.S.A.<br> ±£ÁôËùÓÐȨÀû¡£</font></p> <script type="text/javascript" language="JavaScript" src="/js/omi/jsc/s_code_remote.js"> </script> </body> diff --git a/extra/source/jdk-6/THIRDPARTYLICENSEREADME.txt b/extra/source/jdk-6/THIRDPARTYLICENSEREADME.txt new file mode 100644 index 000000000..a84b0734c --- /dev/null +++ b/extra/source/jdk-6/THIRDPARTYLICENSEREADME.txt @@ -0,0 +1,3482 @@ +DO NOT TRANSLATE OR LOCALIZE. + +%% The following software may be included in this product: CS CodeViewer v1.0; +Use of any of this software is governed by the terms of the license below: +Copyright 1999 by CoolServlets.com. + +Any errors or suggested improvements to this class can be reported as instructed +on CoolServlets.com. We hope you enjoy this program... your comments will +encourage further development! This software is distributed under the terms of +the BSD License. Redistribution and use in source and binary forms, with or +without modification, are permitted provided that the following conditions are +met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. Neither name of +CoolServlets.com nor the names of its contributors may be used to endorse or +promote products derived from this software without specific prior written +permission. + +THIS SOFTWARE IS PROVIDED BY COOLSERVLETS.COM AND CONTRIBUTORS ``AS IS'' AND ANY +EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY +DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." + +%% The following software may be included in this product: Crimson v1.1.1 ; Use +of any of this software is governed by the terms of the license below: + +/* +* The Apache Software License, Version 1.1 +* +* +* Copyright (c) 1999-2000 The Apache Software Foundation. All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* 1. Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* 2. Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* +* 3. The end-user documentation included with the redistribution, +* if any, must include the following acknowledgment: +* "This product includes software developed by the +* Apache Software Foundation (http://www.apache.org/)." +* Alternately, this acknowledgment may appear in the software itself, +* if and wherever such third-party acknowledgments normally appear. +* +* 4. The names "Crimson" and "Apache Software Foundation" must +* not be used to endorse or promote products derived from this +* software without prior written permission. For written +* permission, please contact apache@apache.org. +* +* 5. Products derived from this software may not be called "Apache", +* nor may "Apache" appear in their name, without prior written +* permission of the Apache Software Foundation. +* +* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR +* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF +* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +* SUCH DAMAGE. +* ====================================================================* +* This software consists of voluntary contributions made by many +* individuals on behalf of the Apache Software Foundation and was +* originally based on software copyright (c) 1999, International +* Business Machines, Inc., http://www.ibm.com. For more +* information on the Apache Software Foundation, please see +* <http://www.apache.org/>. +*/ + + +%% The following software may be included in this product: Xalan J2; Use of any of this +software is governed by the terms of the license below: + + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + +1. Definitions. + +"License" shall mean the terms and conditions for use, reproduction, and +distribution as defined by Sections 1 through 9 of this document. "Licensor" +shall mean the copyright owner or entity authorized by the copyright owner that +is granting the License. + +"Legal Entity" shall mean the union of the acting entity and all other entities +that control, are controlled by, or are under common control with that entity. +For the purposes of this definition, "control" means (i) the power, direct or +indirect, to cause the direction or management of such entity, whether by +contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the +outstanding shares, or (iii) beneficial ownership of such entity. "You" (or +"Your") shall mean an individual or Legal Entity exercising permissions granted +by this License. + +"Source" form shall mean the preferred form for making modifications, including +but not limited to software source code, documentation source, and configuration +files. + +"Object" form shall mean any form resulting from mechanical transformation or +translation of a Source form, including but not limited to compiled object code, +generated documentation, and conversions to other media types. + +"Work" shall mean the work of authorship, whether in Source or Object form, made +available under the License, as indicated by a copyright notice that is included +in or attached to the work (an example is provided in the Appendix below). + +"Derivative Works" shall mean any work, whether in Source or Object form, that +is based on (or derived from) the Work and for which the editorial revisions, +annotations, elaborations, or other modifications represent, as a whole, an +original work of authorship. For the purposes of this License, Derivative Works +shall not include works that remain separable from, or merely link (or bind by +name) to the interfaces of, the Work and Derivative Works thereof. + +"Contribution" shall mean any work of authorship, including the original version +of the Work and any modifications or additions to that Work or Derivative Works +thereof, that is intentionally submitted to Licensor for inclusion in the Work +by the copyright owner or by an individual or Legal Entity authorized to submit +on behalf of the copyright owner. For the purposes of this definition, +"submitted" means any form of electronic, verbal, or written communication sent +to the Licensor or its representatives, including but not limited to +communication on electronic mailing lists, source code control systems, and +issue tracking systems that are managed by, or on behalf of, the Licensor for +the purpose of discussing and improving the Work, but excluding communication +that is conspicuously marked or otherwise designated in writing by the copyright +owner as "Not a Contribution." + +"Contributor" shall mean Licensor and any individual or Legal Entity on behalf +of whom a Contribution has been received by Licensor and subsequently +incorporated within the Work. + +2. Grant of Copyright License. Subject to the terms and conditions of this +License, each Contributor hereby grants to You a perpetual, worldwide, +non-exclusive, no-charge, royalty-free, irrevocable copyright license to +reproduce, prepare Derivative Works of, publicly display, publicly perform, +sublicense, and distribute the Work and such Derivative Works in Source or +Object form. + +3. Grant of Patent License. Subject to the terms and conditions of this +License, each Contributor hereby grants to You a perpetual, worldwide, +non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this +section) patent license to make, have made, use, offer to sell, sell, import, +and otherwise transfer the Work, where such license applies only to those patent +claims licensable by such Contributor that are necessarily infringed by their +Contribution(s) alone or by combination of their Contribution(s) with the Work +to which such Contribution(s) was submitted. If You institute patent litigation +against any entity (including a cross-claim or counterclaim in a lawsuit) +alleging that the Work or a Contribution incorporated within the Work +constitutes direct or contributory patent infringement, then any patent licenses +granted to You under this License for that Work shall terminate as of the date +such litigation is filed. + +4. Redistribution. You may reproduce and distribute copies of the Work or +Derivative Works thereof in any medium, with or without modifications, and in +Source or Object form, provided that You meet the following conditions: + +(a) You must give any other recipients of the Work or Derivative Works a copy of +this License; and + +(b) You must cause any modified files to carry prominent notices stating that +You changed the files; and + +(c) You must retain, in the Source form of any Derivative Works that You +distribute, all copyright, patent, trademark, and attribution notices from the +Source form of the Work, excluding those notices that do not pertain to any part +of the Derivative Works; and + +(d) If the Work includes a "NOTICE" text file as part of its distribution, then +any Derivative Works that You distribute must include a readable copy of the +attribution notices contained within such NOTICE file, excluding those notices +that do not pertain to any part of the Derivative Works, in at least one of the +following places: within a NOTICE text file distributed as part of the +Derivative Works; within the Source form or documentation, if provided along +with the Derivative Works; or, within a display generated by the Derivative +Works, if and wherever such third-party notices normally appear. The contents +of the NOTICE file are for informational purposes only and do not modify the +License. You may add Your own attribution notices within Derivative Works that +You distribute, alongside or as an addendum to the NOTICE text from the Work, +provided that such additional attribution notices cannot be construed as +modifying the License. + +You may add Your own copyright statement to Your modifications and may provide +additional or different license terms and conditions for use, reproduction, or +distribution of Your modifications, or for any such Derivative Works as a whole, +provided Your use,reproduction, and distribution of the Work otherwise complies +with the conditions stated in this License. + +5. Submission of Contributions. Unless You explicitly state otherwise, any +Contribution intentionally submitted for inclusion in the Work by You to the +Licensor shall be under the terms and conditions of this License, without any +additional terms or conditions. Notwithstanding the above, nothing herein shall +supersede or modify the terms of any separate license agreement you may have +executed with Licensor regarding such Contributions. + +6. Trademarks. This License does not grant permission to use the trade names, +trademarks, service marks, or product names of the Licensor, except as required +for reasonable and customary use in describing the origin of the Work and +reproducing the content of the NOTICE file. + +7. Disclaimer of Warranty. Unless required by applicable law or agreed to in +writing, Licensor provides the Work (and each Contributor provides its +Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied, including, without limitation, any warranties +or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A +PARTICULAR PURPOSE. You are solely responsible for determining the +appropriateness of using or redistributing the Work and assume any risks +associated with Your exercise of permissions under this License. + +8. Limitation of Liability. In no event and under no legal theory, whether in +tort (including negligence), contract, or otherwise, unless required by +applicable law (such as deliberate and grossly negligent acts) or agreed to in +writing, shall any Contributor be liable to You for damages, including any +direct, indirect, special, incidental, or consequential damages of any character +arising as a result of this License or out of the use or inability to use the +Work (including but not limited to damages for loss of goodwill, work stoppage, +computer failure or malfunction, or any and all other commercial damages or +losses), even if such Contributor has been advised of the possibility of such +damages. + +9. Accepting Warranty or Additional Liability. While redistributing the Work +or Derivative Works thereof, You may choose to offer,and charge a fee for, +acceptance of support, warranty, indemnity, or other liability obligations +and/or rights consistent with this License. However, in accepting such +obligations, You may act only on Your own behalf and on Your sole +responsibility, not on behalf of any other Contributor, and only if You agree to +indemnify, defend, and hold each Contributor harmless for any liability incurred +by, or claims asserted against, such Contributor by reason of your accepting any +such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + +To apply the Apache License to your work, attach the following boilerplate +notice, with the fields enclosed by brackets "[]" replaced with your own +identifying information. (Don't include the brackets!) The text should be +enclosed in the appropriate comment syntax for the file format. We also +recommend that a file or class name and description of purpose be included on +the same "printed page" as the copyright notice for easier identification within +third-party archives. + + Copyright [yyyy] [name of copyright owner] + +Licensed under the Apache License, Version 2.0 (the "License"); you may not use +this file except in compliance with the License. You may obtain a copy of the +License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, software distributed +under the License is distributed on an "AS IS" BASIS,WITHOUT WARRANTIES OR +CONDITIONS OF ANY KIND, either express or implied. See the License for the +specific language governing permissions and limitations under the License. + +%% The following software may be included in this product: NSIS 1.0j; Use of +any of this software is governed by the terms of the license below: +Copyright (C) 1999-2000 Nullsoft, Inc. + +This software is provided 'as-is', without any express or implied warranty. In +no event will the authors be held liable for any damages arising from the use of +this software. Permission is granted to anyone to use this software for any +purpose, including commercial applications, and to alter it and redistribute it +freely, subject to the following restrictions: + +1. The origin of this software must not be misrepresented; you must not claim +that you wrote the original software. If you use this software in a product, an +acknowledgment in the product documentation would be appreciated but is not +required. + +2. Altered source versions must be plainly marked as such, and must not be +misrepresented as being the original software. + +3. This notice may not be removed or altered from any source distribution. +Justin Frankel justin@nullsoft.com" + +%% Some Portions licensed from IBM are available at: +http://www.ibm.com/software/globalization/icu/ + +%% Portions Copyright Eastman Kodak Company 1992 + +%% Lucida is a registered trademark or trademark of Bigelow & Holmes in the U.S. +and other countries. + +%% Portions licensed from Taligent, Inc. + +%% The following software may be included in this product:IAIK PKCS Wrapper; Use +of any of this software is governed by the terms of the license below: + +Copyright (c) 2002 Graz University of Technology. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: + + "This product includes software developed by IAIK of Graz University of Technology." + +Alternately, this acknowledgment may appear in the software itself, if and +wherever such third-party acknowledgments normally appear. + +4. The names "Graz University of Technology" and "IAIK of Graz University of +Technology" must not be used to endorse or promote products derived from this +software without prior written permission. + +5. Products derived from this software may not be called "IAIK PKCS Wrapper", +nor may "IAIK" appear in their name, without prior written permission of Graz +University of Technology. + +THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE LICENSOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE +GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: Document Object +Model (DOM) v. Level 3; Use of any of this software is governed by the terms of +the license below: + +W3C SOFTWARE NOTICE AND LICENSE + +http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231 + +This work (and included software, documentation such as READMEs, or other +related items) is being provided by the copyright holders under the following +license. By obtaining, using and/or copying this work, you (the licensee) agree +that you have read, understood, and will comply with the following terms and +conditions. + +Permission to copy, modify, and distribute this software and its documentation, +with or without modification, for any purpose and without fee or royalty is +hereby granted, provided that you include the following on ALL copies of the +software and documentation or portions thereof, including modifications: + +1.The full text of this NOTICE in a location viewable to users of the +redistributed or derivative work. + +2.Any pre-existing intellectual property disclaimers, notices, or terms and + conditions. If none exist, the W3C Software Short Notice should be included + (hypertext is preferred, text is permitted) within the body of any + redistributed or derivative code. + +3.Notice of any changes or modifications to the files, including the date + changes were made. (We recommend you provide URIs to the location from which + the code is derived.) + +THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS +MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT +LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE +OR THAT THEUSE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD +PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to the software without specific, written prior permission. +Title to copyright in this software and any associated documentation will at all +times remain with copyright holders. + +____________________________________ + +This formulation of W3C's notice and license became active on December 31 2002. +This version removes the copyright ownership notice such that this license can +be used with materials other than those owned by the W3C, reflects that ERCIM is +now a host of the W3C, includes references to this specific dated version of the +license, and removes the ambiguous grant of "use". Otherwise, this version is +the same as the previous version and is written so as to preserve the Free +Software Foundation's assessment of GPL compatibility and OSI's certification +under the Open Source Definition. Please see our Copyright FAQ for common +questions about using materials from our site, including specific terms and +conditions for packages like libwww, Amaya, and Jigsaw. Other questions about +this notice can be directed to site-policy@w3.org. + +%% The following software may be included in this product: Xalan, Xerces; Use +of any of this software is governed by the terms of the license below: /* + + * The Apache Software License, Version 1.1 + * + * + * Copyright (c) 1999-2003 The Apache Software Foundation. All rights + * reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * 3. The end-user documentation included with the redistribution, + * if any, must include the following acknowledgment: + * "This product includes software developed by the + * Apache Software Foundation (http://www.apache.org/)." + * Alternately, this acknowledgment may appear in the software itself, + * if and wherever such third-party acknowledgments normally appear. + * + * 4. The names "Xerces" and "Apache Software Foundation" must + * not be used to endorse or promote products derived from this + * software without prior written permission. For written + * permission, please contact apache@apache.org. + * + * 5. Products derived from this software may not be called "Apache", + * nor may "Apache" appear in their name, without prior written + * permission of the Apache Software Foundation. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR + * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * ==================================================================== + * + * This software consists of voluntary contributions made by many + * individuals on behalf of the Apache Software Foundation and was + * originally based on software copyright (c) 1999, International + * Business Machines, Inc., http://www.ibm.com. For more + * information on the Apache Software Foundation, please see http://www.apache.org + * + +%% The following software may be included in this product: W3C XML Conformance +Test Suites v. 20020606; Use of any of this software is governed by the terms +of the license below: + +W3C SOFTWARE NOTICE AND LICENSE + +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. +http://www.w3.org/Consortium/Legal/ + +This W3C work (including software, documents, or other related items) is being +provided by the copyright holders under the following license. By +obtaining,using and/or copying this work, you (the licensee) agree that you have +read,understood, and will comply with the following terms and conditions: + +Permission to use, copy, modify, and distribute this software and its +documentation, with or without modification, for any purpose and without fee +orroyalty is hereby granted, provided that you include the following on ALL +copiesof the software and documentation or portions thereof, including +modifications,that you make: + +1. The full text of this NOTICE in a location viewable to users of the +redistributed or derivative work. + +2. Any pre-existing intellectual property disclaimers, notices, or terms and +conditions. If none exist, a short notice of the following form (hypertext is +preferred, text is permitted) should be used within the body of any +redistributed or derivative code: "Copyright [$date-of-software] World Wide Web +Consortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" + +3. Notice of any changes or modifications to the W3C files, including the date +changes were made. (We recommend you provide URIs to the location from which +the code is derived.) + +THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS +MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT +LIMITEDTO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE +OR THATTHE USE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD +PARTYPATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. + +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to the software without specific, written prior permission. +Title to copyright in this software and any associated documentation will at all +times remain with copyright holders. + +____________________________________ + +This formulation of W3C's notice and license became active on August 14 1998 +soas to improve compatibility with GPL. This version ensures that W3C software +licensing terms are no more restrictive than GPL and consequently W3C software +may be distributed in GPL packages. See the older formulation for the policy +prior to this date. Please see our Copyright FAQ for common questions about +using materials from our site, including specific terms and conditions for +packages like libwww, Amaya, and Jigsaw. Other questions about this notice can +be directed to site-policy@w3.org. + +%% The following software may be included in this product: W3C XML Schema Test +Collection v. 1.16.2; Use of any of this software is governed by the terms of +the license below: W3C DOCUMENT NOTICE AND LICENSE + +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. +http://www.w3.org/Consortium/Legal/ + +Public documents on the W3C site are provided by the copyright holders under the +following license. The software or Document Type Definitions (DTDs) associated +with W3C specifications are governed by the Software Notice. By using and/or +copying this document, or the W3C document from which this statement is +linked,you (the licensee) agree that you have read, understood, and will comply +with the following terms and conditions: + +Permission to use, copy, and distribute the contents of this document, or theW3C +document from which this statement is linked, in any medium for any purpose and +without fee or royalty is hereby granted, provided that you include the +following on ALL copies of the document, or portions thereof, that you use: + +1. A link or URL to the original W3C document. + +2. The pre-existing copyright notice of the original author, or if it doesn't +exist, a notice of the form: "Copyright [$date-of-document] World Wide +WebConsortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but +atextual representation is permitted.) + +3. If it exists, the STATUS of the W3C document. + +When space permits, inclusion of the full text of this NOTICE should be +provided. We request that authorship attribution be provided in any +software,documents, or other items or products that you create pursuant to the +implementation of the contents of this document, or any portion thereof. + +No right to create modifications or derivatives of W3C documents is granted +pursuant to this license. However, if additional requirements (documented in +the Copyright FAQ) are satisfied, the right to create modifications or +derivatives is sometimes granted by the W3C to individuals complying with those +requirements. THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO +REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, +NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR +ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY +THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE +PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. + +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to this document or its contents without specific, written +prior permission. Title to copyright in this document will at all times remain +with copyright holders. + +---------------------------------------------------------------------------- + +This formulation of W3C's notice and license became active on April 05 1999 soas +to account for the treatment of DTDs, schema's and bindings. See the older +formulation for the policy prior to this date. Please see our Copyright FAQ for +common questions about using materials from our site, including specific terms +and conditions for packages like libwww, Amaya, and Jigsaw. Other questions +about this notice can be directed to site-policy@w3.org. webmaster (last +updated by reagle on 1999/04/99.) + + +%% The following software may be included in this product: Mesa 3-D graphics +library v. 5; Use of any of this software is governed by the terms of the +license below: + +core Mesa code include/GL/gl.h Brian Paul +Mesa GLX driver include/GL/glx.h Brian Paul +Mesa Ext registry include/GL/glext.h SGI +SGI Free B include/GL/glxext.h + +Mesa license: + +The Mesa distribution consists of several components. Different copyrights and +licenses apply to different components. For example, GLUT is copyrighted by +Mark Kilgard, some demo programs are copyrighted by SGI, some of the Mesa device +drivers are copyrighted by their authors. See below for a list of Mesa's +components and the copyright/license for each. + +The core Mesa library is licensed according to the terms of the XFree86copyright +(an MIT-style license). This allows integration with the XFree86/DRIproject. +Unless otherwise stated, the Mesa source code and documentation is licensed as +follows: + +Copyright (C) 1999-2003 Brian Paul All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"),to deal in the +Software without restriction, including without limitation the rights to use, +copy, modify, merge, publish, distribute, sublicense,and/or sell copies of the +Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESSOR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS +FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALLBRIAN PAUL BE +LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER INAN ACTION OF +CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +SGI FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000]) +1. Definitions. + +1.1 "Additional Notice Provisions" means such additional provisions as appear in +the Notice in Original Code under the heading "Additional Notice Provisions." + +1.2 "Covered Code" means the Original Code or Modifications, or any combination +thereof. + +1.3 "Hardware" means any physical device that accepts input, processes input, +stores the results of processing, and/or provides output. + +1.4 "Larger Work" means a work that combines Covered Code or portions thereof +with code not governed by the terms of this License. + +1.5 "Licensable" means having the right to grant, to the maximum extent +possible, whether at the time of the initial grant or subsequently acquired, any +and all of the rights conveyed herein. + +1.6 "License" means this document. + +1.7 "Licensed Patents" means patent claims Licensable by SGI that are infringed +by the use or sale of Original Code or any Modifications provided by SGI, or any +combination thereof. + +1.8 "Modifications" means any addition to or deletion from the substance or +structure of the Original Code or any previous Modifications. When Covered Code +is released as a series of files, a Modification is: A. Any addition to the +contents of a file containing Original Code and/or addition to or deletion from +the contents of a file containing previous Modifications.B. Any new file that +contains any part of the Original Code or previous Modifications. + +1.9 "Notice" means any notice in Original Code or Covered Code, as required by +and in compliance with this License. + +1.10 "Original Code" means source code of computer software code that is +described in the source code Notice required by Exhibit A as Original Code, and +updates and error corrections specifically thereto. + +1.11 "Recipient" means an individual or a legal entity exercising rights under, +and complying with all of the terms of, this License or a future version of this +License issued under Section 8. For legal entities, "Recipient" includes any +entity that controls, is controlled by, or is under common control with +Recipient. For purposes of this definition, "control" of an entity means (a) +the power, direct or indirect, to direct or manage such entity, or (b) ownership +of fifty percent (50%) or more of the outstanding shares or beneficial ownership +of such entity. + +1.12 "Recipient Patents" means patent claims Licensable by a Recipient that are +infringed by the use or sale of Original Code or any Modifications provided by +SGI, or any combination thereof. + +1.13 "SGI" means Silicon Graphics, Inc. + +1.14 "SGI Patents" means patent claims Licensable by SGI other than the Licensed +Patents. + +2. License Grant and Restrictions. + +2.1 SGI License Grant. Subject to the terms of this License and any third party +intellectual property claims, for the duration of intellectual property +protections inherent in the Original Code, SGI hereby grants Recipient a +worldwide, royalty-free, non-exclusive license, to do the following: (i) under +copyrights Licensable by SGI, to reproduce, distribute, create derivative works +from, and, to the extent applicable, display and perform the Original Code +and/or any Modifications provided by SGI alone and/or as part of a Larger Work; +and (ii) under any Licensable Patents, to make, have made, use, sell, offer for +sale, import and/or otherwise transfer the Original Code and/or any +Modifications provided by SGI. Recipient accepts the terms and conditions of +this License by undertaking any of the aforementioned actions. The patent +license shall apply to the Covered Code if, at the time any related Modification +is added, such addition of the Modification causes such combination to be +covered by the Licensed Patents . The patent license in Section 2.1(ii) shall +not apply to any other combinations that include the Modification. No patent +license is provided under SGI Patents for infringements of SGI Patents by +Modifications not provided by SGI or combinations of Original Code and +Modifications not provided by SGI. + +2.2 Recipient License Grant. Subject to the terms of this License and any third +party intellectual property claims, Recipient hereby grants SGI and any other +Recipients a worldwide, royalty-free, non-exclusive license, under any Recipient +Patents, to make, have made, use, sell, offer for sale, import and/or otherwise +transfer the Original Code and/or any Modifications provided by SGI. + +2.3 No License For Hardware Implementations. The licenses granted in Section +2.1 and 2.2 are not applicable to implementation in Hardware of the algorithms +embodied in the Original Code or any Modifications provided by SGI . + +3. Redistributions. + +3.1 Retention of Notice/Copy of License. The Notice set forth in Exhibit A, +below, must be conspicuously retained or included in any and all redistributions +of Covered Code. For distributions of the Covered Code in source code form, the +Notice must appear in every file that can include a text comments field; in +executable form, the Notice and a copy of this License must appear in related +documentation or collateral where the Recipient's rights relating to Covered +Code are described. Any Additional Notice Provisions which actually appears in +the Original Code must also be retained or included in any and all +redistributions of Covered Code. + +3.2 Alternative License. Provided that Recipient is in compliance with the +terms of this License, Recipient may, so long as without derogation of any of +SGI's rights in and to the Original Code, distribute the source code and/or +executable version(s) of Covered Code under (1) this License; (2) a license +identical to this License but for only such changes as are necessary in order to +clarify Recipient's role as licensor of Modifications; and/or (3) a license of +Recipient's choosing, containing terms different from this License, provided +that the license terms include this Section 3 and Sections 4, 6, 7, 10, 12, and +13, which terms may not be modified or superseded by any other terms of such +license. If Recipient elects to use any license other than this License, +Recipient must make it absolutely clear that any of its terms which differ from +this License are offered by Recipient alone, and not by SGI. It is emphasized +that this License is a limited license, and, regardless of the license form +employed by Recipi ent in accordance with this Section 3.2, Recipient may +relicense only such rights, in Original Code and Modifications by SGI, as it has +actually been granted by SGI in this License. + +3.3 Indemnity. Recipient hereby agrees to indemnify SGI for any liability +incurred by SGI as a result of any such alternative license terms Recipient +offers. + +4. Termination. This License and the rights granted hereunder will terminate +automatically if Recipient breaches any term herein and fails to cure such +breach within 30 days thereof. Any sublicense to the Covered Code that is +properly granted shall survive any termination of this License, absent +termination by the terms of such sublicense. Provisions that, by their nature, +must remain in effect beyond the termination of this License, shall survive. + +5. No Trademark Or Other Rights. This License does not grant any rights to: +(i) any software apart from the Covered Code, nor shall any other rights or +licenses not expressly granted hereunder arise by implication, estoppel or +otherwise with respect to the Covered Code; (ii) any trade name, trademark or +service mark whatsoever, including without limitation any related right for +purposes of endorsement or promotion of products derived from the Covered Code, +without prior written permission of SGI; or (iii) any title to or ownership of +the Original Code, which shall at all times remains with SGI. All rights in the +Original Code not expressly granted under this License are reserved. + +6. Compliance with Laws; Non-Infringement. There are various worldwide laws, +regulations, and executive orders applicable to dispositions of Covered Code, +including without limitation export, re-export, and import control laws, +regulations, and executive orders, of the U.S. government and other countries, +and Recipient is reminded it is obliged to obey such laws, regulations, and +executive orders. Recipient may not distribute Covered Code that (i) in any way +infringes (directly or contributorily) any intellectual property rights of any +kind of any other person or entity or (ii) breaches any representation or +warranty, express, implied or statutory, to which, under any applicable law, it +might be deemed to have been subject. + +7. Claims of Infringement. If Recipient learns of any third party claim that +any disposition of Covered Code and/or functionality wholly or partially +infringes the third party's intellectual property rights, Recipient will +promptly notify SGI of such claim. + +8. Versions of the License. SGI may publish revised and/or new versions of the +License from time to time, each with a distinguishing version number. Once +Covered Code has been published under a particular version of the License, +Recipient may, for the duration of the license, continue to use it under the +terms of that version, or choose to use such Covered Code under the terms of any +subsequent version published by SGI. Subject to the provisions of Sections 3 +and 4 of this License, only SGI may modify the terms applicable to Covered Code +created under this License. + +9. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED "AS IS." ALL EXPRESS AND +IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED, INCLUDING, WITHOUT LIMITATION, +ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, +FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. SGI ASSUMES NO RISK AS +TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE +DEFECTIVE IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR +OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL PART OF THIS +LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT SUBJECT TO +THIS DISCLAIMER. + +10. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY, WHETHER +TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIABILITY), CONTRACT, +OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, +SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, +WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, LOSS OF DATA, +COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR +LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH +DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR +PERSONAL INJURY RESULTING FROM SGI's NEGLIGENCE TO THE EXTENT APPLICABLE LAW +PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR +LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND +LIMITATION MAY NOT APPLY TO RECIPIENT. + +11. Indemnity. Recipient shall be solely responsible for damages arising, +directly or indirectly, out of its utilization of rights under this License. +Recipient will defend, indemnify and hold harmless Silicon Graphics, Inc. from +and against any loss, liability, damages, costs or expenses (including the +payment of reasonable attorneys fees) arising out of Recipient's use, +modification, reproduction and distribution of the Covered Code or out of any +representation or warranty made by Recipient. + +12. U.S. Government End Users. The Covered Code is a "commercial item" +consisting of "commercial computer software" as such terms are defined in title +48 of the Code of Federal Regulations and all U.S. Government End Users acquire +only the rights set forth in this License and are subject to the terms of this +License. + +13. Miscellaneous. This License represents the complete agreement concerning +the its subject matter. If any provision of this License is held to be +unenforceable, such provision shall be reformed so as to achieve as nearly as +possible the same legal and economic effect as the original provision and the +remainder of this License will remain in effect. This License shall be governed +by and construed in accordance with the laws of the United States and the State +of California as applied to agreements entered into and to be performed entirely +within California between California residents. Any litigation relating to this +License shall be subject to the exclusive jurisdiction of the Federal Courts of +the Northern District of California (or, absent subject matter jurisdiction in +such courts, the courts of the State of California), with venue lying +exclusively in Santa Clara County, California, with the losing party responsible +for costs, including without limitation, court costs and reasonable attorneys +fees and ex penses. The application of the United Nations Convention on +Contracts for the International Sale of Goods is expressly excluded. Any law or +regulation that provides that the language of a contract shall be construed +against the drafter shall not apply to this License. + +Exhibit A License Applicability. Except to the extent portions of this file are +made subject to an alternative license as permitted in the SGI Free Software +License B, Version 1.1 (the "License"), the contents of this file are subject +only to the provisions of the License. You may not use this file except in +compliance with the License. You may obtain a copy of the License at Silicon +Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway, Mountain View, +CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB Note that, as provided +in the License, the Software is distributed on an "AS IS" basis, with ALL +EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT +LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, +SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +Original Code. The Original Code is: [name of software, version number, and +release date], developed by Silicon Graphics, Inc. The Original Code is +Copyright (c) [dates of first publication, as appearing in the Notice in the +Original Code] Silicon Graphics, Inc. Copyright in any portions created by +third parties is as indicated elsewhere herein. All Rights Reserved. +Additional Notice Provisions: [such additional provisions, if any, as appear in +the Notice in the Original Code under the heading "Additional Notice +Provisions"] + +%% The following software may be included in this product: Byte Code +Engineering Library (BCEL) v. 5; Use of any of this software is governed by the +terms of the license below: + +Apache Software License + +/ +==================================================================== +The Apache Software License, Version 1.1 + +Copyright (c) 2001 The Apache Software Foundation. All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials providedwith the distribution. + +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names "Apache" and "Apache Software Foundation"and "Apache BCEL" must +not be used to endorse or promote products derived from this software without +prior written permission. For written permission, please contact +apache@apache.org. + +5. Products derived from this software may not be called"Apache", "Apache +BCEL", nor may "Apache" appear in their name,without prior written permission of +the Apache Software Foundation. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED ORIMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWAREFOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT,INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, +OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVERCAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED +OF THEPOSSIBILITY OF SUCH DAMAGE. +==================================================================== + +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. / + + + +%% The following software may be included in this product: Regexp, Regular +Expression Package v. 1.2; Use of any of this software is governed by the terms +of the license below: The Apache Software License, Version 1.1 + +Copyright (c) 2001 The Apache Software Foundation. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" +must not be used to endorse or promote products derived from this software +without prior written permission. For written permission, please contact +apache@apache.org. + +5. Products derived from this software may not be called "Apache", "Apache +Turbine", nor may "Apache" appear in their name, without prior written +permission of the Apache Software Foundation. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +==================================================================== + +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. + +%% The following software may be included in this product: CUP Parser Generator +for Java v. 0.10k; Use of any of this software is governed by the terms of the +license below: CUP Parser Generator Copyright Notice, License, and Disclaimer + +Copyright 1996-1999 by Scott Hudson, Frank Flannery, C. Scott Ananian + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, provided that +the above copyright notice appear in all copies and that both the copyright +notice and this permission notice and warranty disclaimer appear in supporting +documentation, and that the names of the authors or their employers not be used +in advertising or publicity pertaining to distribution of the software without +specific, written prior permission. + +The authors and their employers disclaim all warranties with regard to this +software, including all implied warranties of merchantability and fitness. In +no event shall the authors or their employers be liable for any special, +indirect or consequential damages or any damages whatsoever resulting from loss +of use, data or profits, whether in an action of contract,negligence or other +tortious action, arising out of or in connection with the use or performance of +this software. + +%% The following software may be included in this product: JLex: A Lexical +Analyzer Generator for Java v. 1.2.5; Use of any of this software is governed +by the terms of the license below: JLEX COPYRIGHT NOTICE, LICENSE AND +DISCLAIMER. + +Copyright 1996-2003 by Elliot Joel Berk and C. Scott Ananian + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, provided that +the above copyright notice appear in all copies and that both the copyright +notice and this permission notice and warranty disclaimer appear in supporting +documentation, and that the name of the authors or their employers not be used +in advertising or publicity pertaining to distribution of the software without +specific, written prior permission. + +The authors and their employers disclaim all warranties with regard to this +software, including all implied warranties of merchantability and fitness. In +no event shall the authors or their employers be liable for any special, +indirect or consequential damages or any damages whatsoever resulting from loss +of use, data or profits, whether in an action of contract, negligence or other +tortious action, arising out of or in connection with the use or performance of +this software. + +Java is a trademark of Sun Microsystems, Inc. References to the Java +programming language in relation to JLex are not meant to imply that Sun +endorses this product. + +%% The following software may be included in this product: SAX v. 2.0.1; Use +of any of this software is governed by the terms of the license below: +Copyright Status + +SAX is free! + +In fact, it's not possible to own a license to SAX, since it's been placed in +the public domain. + +No Warranty + +Because SAX is released to the public domain, there is no warranty for the +design or for the software implementation, to the extent permitted by applicable +law. Except when otherwise stated in writing the copyright holders and/or other +parties provide SAX "as is" without warranty of any kind, either expressed or +implied, including, but not limited to, the implied warranties of +merchantability and fitness for a particular purpose. The entire risk as to the +quality and performance of SAX is with you. Should SAX prove defective, you +assume the cost of all necessary servicing, repair or correction. + +In no event unless required by applicable law or agreed to in writing will any +copyright holder, or any other party who may modify and/or redistribute SAX, be +liable to you for damages, including any general, special, incidental or +consequential damages arising out of the use or inability to use SAX (including +but not limited to loss of data or data being rendered inaccurate or losses +sustained by you or third parties or a failure of the SAX to operate with any +other programs), even if such holder or other party has been advised of the +possibility of such damages. + +Copyright Disclaimers + +This page includes statements to that effect by David Megginson, who would have +been able to claim copyright for the original work. + +SAX 1.0 + +Version 1.0 of the Simple API for XML (SAX), created collectively by the +membership of the XML-DEV mailing list, is hereby released into the public +domain. + +No one owns SAX: you may use it freely in both commercial and non-commercial +applications, bundle it with your software distribution, include it on a CD-ROM, +list the source code in a book, mirror the documentation at your own web site, +or use it in any other way you see fit. + +David Megginson, sax@megginson.com +1998-05-11 + +SAX 2.0 + +I hereby abandon any property rights to SAX 2.0 (the Simple API for XML), and +release all of the SAX 2.0 source code, compiled code, and documentation +contained in this distribution into the Public Domain. SAX comes with NO +WARRANTY or guarantee of fitness for any purpose. + +David Megginson, david@megginson.com +2000-05-05 + +%% The following software may be included in this product: Cryptix; Use of any +of this software is governed by the terms of the license below: + +Cryptix General License + +Copyright © 1995-2003 The Cryptix Foundation Limited. All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1.Redistributions of source code must retain the copyright notice, this list of +conditions and the following disclaimer. + +2.Redistributions in binary form must reproduce the above copyright notice, this +list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY +THE CRYPTIX FOUNDATION LIMITED AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS +ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT +SHALL THE CRYPTIX FOUNDATION LIMITED OR CONTRIBUTORS BELIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOTLIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: W3C XML Schema Test +Collection; Use of any of this software is governed by the terms of the license +below: + +W3C DOCUMENT NOTICE AND LICENSE + +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. + +http://www.w3.org/Consortium/Legal/ + +Public documents on the W3C site are provided by the copyright holders under the +following license. The software or Document Type Definitions (DTDs) associated +with W3C specifications are governed by the Software Notice. By using and/or +copying this document, or the W3C document from which this statement is +linked,you (the licensee) agree that you have read, understood, and will comply +with the following terms and conditions: + +Permission to use, copy, and distribute the contents of this document, or theW3C +document from which this statement is linked, in any medium for any purpose and +without fee or royalty is hereby granted, provided that you include the +following on ALL copies of the document, or portions thereof, that you use: + +1. A link or URL to the original W3C document. +2. The pre-existing copyright notice of the original author, or if it doesn't +exist, a notice of the form: "Copyright [$date-of-document] World Wide Web +Consortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but a +textual representation is permitted.) +3. If it exists, the STATUS of the W3C document. + +When space permits, inclusion of the full text of this NOTICE should be +provided. We request that authorship attribution be provided in any +software,documents, or other items or products that you create pursuant to the +implementation of the contents of this document, or any portion thereof. + +No right to create modifications or derivatives of W3C documents is granted +pursuant to this license. However, if additional requirements (documented in +the Copyright FAQ) are satisfied, the right to create modifications or +derivatives is sometimes granted by the W3C to individuals complying with those +requirements. + +THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO +REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, +NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR +ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY +THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE +PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. + +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to this document or its contents without specific, written +prior permission. Title to copyright in this document will at all times remain +with copyright holders. + +---------------------------------------------------------------------------- + +This formulation of W3C's notice and license became active on April 05 1999 so +as to account for the treatment of DTDs, schema's and bindings. See the older +formulation for the policy prior to this date. Please see our Copyright FAQ for +common questions about using materials from our site, including specific terms +and conditions for packages like libwww, Amaya, and Jigsaw. Other questions +about this notice can be directed to site-policy@w3.org. webmaster (last +updated by reagle on 1999/04/99.) + +%% The following software may be included in this product: Stax API; Use of any +of this software is governed by the terms of the license below: + +Streaming API for XML (JSR-173) Specification +Reference Implementation +License Agreement + +READ THE TERMS OF THIS (THE "AGREEMENT") CAREFULLY BEFORE VIEWING OR USING +THESOFTWARE LICENSED HEREUNDER. BY VIEWING OR USING THE SOFTWARE, YOU AGREE TO +THE TERMS OF THISAGREEMENT. IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, +INDICATE YOUR ACCEPTANCE OF THESETERMS BY SELECTING THE "ACCEPT" BUTTON AT THE +END OF THIS AGREEMENT. IF YOU DO NOT AGREE TOALL THESE TERMS, PROMPTLY RETURN +THE UNUSED SOFTWARE TO ORIGINAL CONTRIBUTOR, DEFINED HEREIN. + +1.0 DEFINITIONS. + +1.1. "BEA" means BEA Systems, Inc., the licensor of the Original Code. + +1.2. "Contributor" means BEA and each entity that creates or contributes to the +creation of Modifications. + +1.3. "Covered Code" means the Original Code or Modifications or the combination +of the Original Code and Modifications, in each case including portions thereof +and corresponding documentation released with the source code. + +1.4. "Executable" means Covered Code in any form other than Source Code. + +1.5. "FCS" means first commercial shipment of a product. + +1.6. "Modifications" means any addition to or deletion from the substance or +structure of either the Original Code or any previous Modifications. When +Covered Code is released as a series of files, a Modification is: + +(a) Any addition to or deletion from the contents of a file containing Original +Code or previous Modifications. + +(b) Any new file that contains any part of the Original Code or previous +Modifications. + +1.7. "Original Code" means Source Code of computer software code Reference +Implementation. + +1.8. "Patent Claims" means any patent claim(s), now owned or hereafter +acquired,including without limitation, method, process, and apparatus claims, in +any patent for which the grantor has the right to grant a license. + +1.9. "Reference Implementation" means the prototype or "proof of +concept"implementation of the Specification developed and made available for +license by or on behalf of BEA. + +1.10. "Source Code" means the preferred form of the Covered Code for making +modifications to it, including all modules it contains, plus any associated +documentation,interface definition files, scripts used to control compilation +and installation of an Executable, or source code differential comparisons +against either the Original Code or another well known,available Covered Code of +the Contributor's choice. + +1.11. "Specification" means the written specification for the Streaming API for +XML , Java technology developed pursuant to the Java Community Process. + +1.12. "Technology Compatibility Kit" or "TCK" means the documentation, testing +tools and test suites associated with the Specification as may be revised by BEA +from time to time, that is provided so that an implementer of the Specification +may determine if its implementation is compliant with the Specification. + +1.13. "You" (or "Your") means an individual or a legal entity exercising rights +under, and complying with all of the terms of, this Agreement or a future +version of this Agreement issued under Section 6.1. For legal entities, "You" +includes any entity which controls,is controlled by, or is under common control +with You. For purposes of this definition,"control" means (a) the power, direct +or indirect, to cause the direction or management of such entity, whether by +contract or otherwise, or (b) ownership of more than fifty percent (50%) of the +outstanding shares or beneficial ownership of such entity. + +2.0 SOURCE CODE LICENSE. + +2.1. Copyright Grant. Subject to the terms of this Agreement, each Contributor +hereby grants You a non-exclusive, worldwide, royalty-free copyright license to +reproduce,prepare derivative works of, publicly display, publicly perform, +distribute and sublicense the Covered Code of such Contributor, if any, and such +derivative works, in Source Code and Executable form. + +2.2. Patent Grant. Subject to the terms of this Agreement, each Contributor +hereby grants You a non-exclusive, worldwide, royalty-free patent license under +the Patent Claims to make, use, sell, offer to sell, import and otherwise +transfer the Covered Code prepared and provided by such Contributor, if any, in +Source Code and Executable form. This patent license shall apply to the Covered +Code if, at the time a Modification is added by the Contributor,such addition of +the Modification causes such combination to be covered by the Patent Claims. +The patent license shall not apply to any other combinations which include the +Modification. + +2.3. Conditions to Grants. You understand that although each Contributor +grants the licenses to the Covered Code prepared by it, no assurances are +provided by any Contributor that the Covered Code does not infringe the patent +or other intellectual property rights of any other entity. Each Contributor +disclaims any liability to You for claims brought by any other entity based on +infringement of intellectual property rights or otherwise. As a condition to +exercising the rights and licenses granted hereunder, You hereby assume sole +responsibility to secure any other intellectual property rights needed, if any. +For example, if a thirdparty patent license is required to allow You to +distribute Covered Code, it is Your responsibility to acquire that license +before distributing such code. + +2.4. Contributors' Representation. Each Contributor represents that to its +knowledge it has sufficient copyright rights in the Covered Code it provides , +if any, to grant the copyright license set forth in this Agreement. + +3.0 DISTRIBUION RESTRICTIONS. + +3.1. Application of Agreement. + +The Modifications which You create or to which You contribute are governed by +the terms of this Agreement, including without limitation Section 2.0. The +Source Code version of Covered Code may be distributed only under the terms of +this Agreement or a future version of this Agreement released under Section 6.1, +and You must include a copy of this Agreement with every copy of the Source Code +You distribute. You may not offer or impose any terms on any Source Code +version that alters or restricts the applicable version of this Agreement or the +recipients' rights hereunder. However, You may include an additional document +offering the additional rights described in Section 3.3. + +3.2. Description of Modifications. + +You must cause all Covered Code to which You contribute to contain a file +documenting the changes You made to create that Covered Code and the date of any +change. You must include a prominent statement that the Modification is +derived, directly or indirectly, from Original Code provided by BEA and +including the name of BEA in (a) the Source Code, and (b) in any notice in an +Executable version or related documentation in which You describe the origin or +ownership of the Covered Code. + +%% The following software may be included in this product: X Window System; Use +of any of this software is governed by the terms of the license below: +Copyright The Open Group + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that the +above copyright notice appear in all copies and that both that copyright notice +and this permission notice appear in supporting documentation. + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN +GROUPBE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +OFCONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH +THESOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of The Open Group shall not be used +in advertising or otherwise to promote the sale, use or other dealings in this +Software without prior written authorization from The Open Group. + +Portions also covered by other licenses as noted in the above URL. + +%% The following software may be included in this product: dom4j v. 1.6; Use +of any of this software is governed by the terms of the license below: + +Redistribution and use of this software and associated documentation +("Software"), with or without modification, are permitted provided that the +following conditions are met: + +1. Redistributions of source code must retain copyright statements and notices +Redistributions must also contain a copy of this document. + +2. Redistributions in binary form must reproduce the above copyright +notice,this list of conditions and the following disclaimer in the documentation +and/or other materials provided with the distribution. + +3. The name "DOM4J" must not be used to endorse or promote products derived +from this Software without prior written permission of MetaStuff, Ltd. For +written permission, please contact dom4j-info@metastuff.com. + +4. Products derived from this Software may not be called "DOM4J" nor may"DOM4J" +appear in their names without prior written permission of MetaStuff,Ltd. DOM4J +is a registered trademark of MetaStuff, Ltd. + +5. Due credit should be given to the DOM4J Project - http://www.dom4j.org + +THIS SOFTWARE IS PROVIDED BY METASTUFF, LTD. AND CONTRIBUTORS ``AS IS'' AND +ANYEXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +AREDISCLAIMED. IN NO EVENT SHALL METASTUFF, LTD. OR ITS CONTRIBUTORS BE LIABLE +FORANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +Copyright 2001-2005 (C) MetaStuff, Ltd. All Rights Reserved. + +%% The following software may be included in this product: Retroweaver; Use of +any of this software is governed by the terms of the license below: + +Copyright (c) February 2004, Toby Reyelts All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +Redistributions of source code must retain the above copyright notice, this list +of conditions and the following disclaimer. Redistributions in binary form must +reproduce the above copyright notice, this list of conditions and the following +disclaimer in the documentation and/or other materials provided with the +distribution. Neither the name of Toby Reyelts nor the names of his +contributors may be used to endorse or promote products derived from this +software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: stripper; Use of any +of this software is governed by the terms of the license below: + +Stripper : debug information stripper Copyright (c) 2003 Kohsuke Kawaguchi All +rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. Neither the name of the copyright holders nor the names of its contributors +may be used to endorse or promote products derived from this software without +specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +%% The following software may be included in this product: libpng official PNG +reference library; Use of any of this software is governed by the terms of the +license below: + +This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail. + +COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: + +If you modify libpng you may insert additional notices immediately following +this sentence. + +libpng version 1.2.6, December 3, 2004, is Copyright (c) 2004 Glenn + Randers-Pehrson, and is distributed according to the same disclaimer and + license as libpng-1.2.5with the following individual added to the list of + Contributing Authors Cosmin Truta + +libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are + Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according + to the same disclaimer and license as libpng-1.0.6 with the following + individuals added to the list of Contributing Authors Simon-Pierre Cadieux + Eric S. Raymond Gilles Vollant + +and with the following additions to the disclaimer: + +There is no warranty against interference with your enjoyment of the library or +against infringement. There is no warranty that our efforts or the library will +fulfill any of your particular purposes or needs. This library is provided with +all faults, and the entire risk of satisfactory quality, performance, accuracy, +and effort is with the user. + +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright + (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the + same disclaimer and license as libpng-0.96,with the following individuals + added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson + Willem van Schaik + +libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, +1997 Andreas Dilger Distributed according to the same disclaimer and license as +libpng-0.88, with the following individuals added to the list of Contributing +Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom +Tanner + +libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) +1995, 1996 Guy Eric Schalnat, Group 42, Inc. + +For the purposes of this copyright and license, "Contributing Authors"is defined +as the following set of individuals: + + Andreas Dilger + Dave Martindale + Guy Eric Schalnat + Paul Schmidt + Tim Wegner + +The PNG Reference Library is supplied "AS IS". The Contributing Authors and +Group 42, Inc. disclaim all warranties, expressed or implied, including, +without limitation, the warranties of merchantability and of fitness for any +purpose. The Contributing Authors and Group 42, Inc. assume no liability for +direct, indirect, incidental, special, exemplary,or consequential damages, which +may result from the use of the PNG Reference Library, even if advised of the +possibility of such damage. + +Permission is hereby granted to use, copy, modify, and distribute this source +code, or portions hereof, for any purpose, without fee, subject to the following +restrictions: + +1. The origin of this source code must not be misrepresented. + +2. Altered versions must be plainly marked as such and must not be +misrepresented as being the original source. + +3. This Copyright notice may not be removed or altered from any source or +altered source distribution. + +The Contributing Authors and Group 42, Inc. specifically permit, without fee, +and encourage the use of this source code as a component to supporting the PNG +file format in commercial products. If you use this source code in a product, +acknowledgment is not required but would be appreciated. + + +A "png_get_copyright" function is available, for convenient use in "about"boxes +and the like: + + printf("%s",png_get_copyright(NULL)); + +Also, the PNG logo (in PNG format, of course) is supplied in the files +"pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a +certification mark of the Open Source Initiative. + +Glenn Randers-Pehrson +glennrp at users.sourceforge.net +December 3, 2004 + +%% The following software may be included in this product: Libungif - An +uncompressed GIF library; Use of any of this software is governed by the terms +of the license below: +The GIFLIB distribution is Copyright (c) 1997 Eric S.Raymond + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO +EVENT SHALL THEAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHERLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM,OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +INTHE SOFTWARE. + + +%% The following software may be included in this product: Ant; Use of any of +this software is governed by the terms of the license below: License The Apache +Software License Version 2.0 + +The Apache Software License Version 2.0 applies to all releases of Ant starting +with ant 1.6.1 + +/* + * Apache License + * Version 2.0, January 2004 + * http://www.apache.org/licenses/ + * + * TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + * + * 1. Definitions. + * + * "License" shall mean the terms and conditions for use, reproduction, + * and distribution as defined by Sections 1 through 9 of this document. + * + * "Licensor" shall mean the copyright owner or entity authorized by + * the copyright owner that is granting the License. + * + * "Legal Entity" shall mean the union of the acting entity and all + * other entities that control, are controlled by, or are under common + * control with that entity. For the purposes of this definition, + * "control" means (i) the power, direct or indirect, to cause the + * direction or management of such entity, whether by contract or + * otherwise, or (ii) ownership of fifty percent (50%) or more of the + * outstanding shares, or (iii) beneficial ownership of such entity. + * + * "You" (or "Your") shall mean an individual or Legal Entity + * exercising permissions granted by this License. + * + * "Source" form shall mean the preferred form for making modifications, + * including but not limited to software source code, documentation + * source, and configuration files. + * + * "Object" form shall mean any form resulting from mechanical + * transformation or translation of a Source form, including but + * not limited to compiled object code, generated documentation, + * and conversions to other media types. + * + * "Work" shall mean the work of authorship, whether in Source or + * Object form, made available under the License, as indicated by a + * copyright notice that is included in or attached to the work + * (an example is provided in the Appendix below). + * + * "Derivative Works" shall mean any work, whether in Source or Object + * form, that is based on (or derived from) the Work and for which the + * editorial revisions, annotations, elaborations, or other modifications + * represent, as a whole, an original work of authorship. For the purposes + * of this License, Derivative Works shall not include works that remain + * separable from, or merely link (or bind by name) to the interfaces of, + * the Work and Derivative Works thereof. + * + * "Contribution" shall mean any work of authorship, including + * the original version of the Work and any modifications or additions + * to that Work or Derivative Works thereof, that is intentionally + * submitted to Licensor for inclusion in the Work by the copyright owner + * or by an individual or Legal Entity authorized to submit on behalf of + * the copyright owner. For the purposes of this definition, "submitted" + * means any form of electronic, verbal, or written communication sent + * to the Licensor or its representatives, including but not limited to + * communication on electronic mailing lists, source code control systems, + * and issue tracking systems that are managed by, or on behalf of, the + * Licensor for the purpose of discussing and improving the Work, but + * excluding communication that is conspicuously marked or otherwise + * designated in writing by the copyright owner as "Not a Contribution." + * + * "Contributor" shall mean Licensor and any individual or Legal Entity + * on behalf of whom a Contribution has been received by Licensor and + * subsequently incorporated within the Work. + * + * 2. Grant of Copyright License. Subject to the terms and conditions of + * this License, each Contributor hereby grants to You a perpetual, + * worldwide, non-exclusive, no-charge, royalty-free, irrevocable + * copyright license to reproduce, prepare Derivative Works of, + * publicly display, publicly perform, sublicense, and distribute the + * Work and such Derivative Works in Source or Object form. + * + * 3. Grant of Patent License. Subject to the terms and conditions of + * this License, each Contributor hereby grants to You a perpetual, + * worldwide, non-exclusive, no-charge, royalty-free, irrevocable + * (except as stated in this section) patent license to make, have made, + * use, offer to sell, sell, import, and otherwise transfer the Work, + * where such license applies only to those patent claims licensable + * by such Contributor that are necessarily infringed by their + * Contribution(s) alone or by combination of their Contribution(s) + * with the Work to which such Contribution(s) was submitted. If You + * institute patent litigation against any entity (including a + * cross-claim or counterclaim in a lawsuit) alleging that the Work + * or a Contribution incorporated within the Work constitutes direct + * or contributory patent infringement, then any patent licenses + * granted to You under this License for that Work shall terminate + * as of the date such litigation is filed. + * + * 4. Redistribution. You may reproduce and distribute copies of the + * Work or Derivative Works thereof in any medium, with or without + * modifications, and in Source or Object form, provided that You + * meet the following conditions: + * + * (a) You must give any other recipients of the Work or + * Derivative Works a copy of this License; and + * + * (b) You must cause any modified files to carry prominent notices + * stating that You changed the files; and + * + * (c) You must retain, in the Source form of any Derivative Works + * that You distribute, all copyright, patent, trademark, and + * attribution notices from the Source form of the Work, + * excluding those notices that do not pertain to any part of + * the Derivative Works; and + * + * (d) If the Work includes a "NOTICE" text file as part of its + * distribution, then any Derivative Works that You distribute must + * include a readable copy of the attribution notices contained + * within such NOTICE file, excluding those notices that do not + * pertain to any part of the Derivative Works, in at least one + * of the following places: within a NOTICE text file distributed + * as part of the Derivative Works; within the Source form or + * documentation, if provided along with the Derivative Works; or, + * within a display generated by the Derivative Works, if and + * wherever such third-party notices normally appear. The contents + * of the NOTICE file are for informational purposes only and + * do not modify the License. You may add Your own attribution + * notices within Derivative Works that You distribute, alongside + * or as an addendum to the NOTICE text from the Work, provided + * that such additional attribution notices cannot be construed + * as modifying the License. + * + * You may add Your own copyright statement to Your modifications and + * may provide additional or different license terms and conditions + * for use, reproduction, or distribution of Your modifications, or + * for any such Derivative Works as a whole, provided Your use, + * reproduction, and distribution of the Work otherwise complies with + * the conditions stated in this License. + * + * 5. Submission of Contributions. Unless You explicitly state otherwise, + * any Contribution intentionally submitted for inclusion in the Work + * by You to the Licensor shall be under the terms and conditions of + * this License, without any additional terms or conditions. + * Notwithstanding the above, nothing herein shall supersede or modify + * the terms of any separate license agreement you may have executed + * with Licensor regarding such Contributions. + * + * 6. Trademarks. This License does not grant permission to use the trade + * names, trademarks, service marks, or product names of the Licensor, + * except as required for reasonable and customary use in describing the + * origin of the Work and reproducing the content of the NOTICE file. + * + * 7. Disclaimer of Warranty. Unless required by applicable law or + * agreed to in writing, Licensor provides the Work (and each + * Contributor provides its Contributions) on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + * implied, including, without limitation, any warranties or conditions + * of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + * PARTICULAR PURPOSE. You are solely responsible for determining the + * appropriateness of using or redistributing the Work and assume any + * risks associated with Your exercise of permissions under this License. + * + * 8. Limitation of Liability. In no event and under no legal theory, + * whether in tort (including negligence), contract, or otherwise, + * unless required by applicable law (such as deliberate and grossly + * negligent acts) or agreed to in writing, shall any Contributor be + * liable to You for damages, including any direct, indirect, special, + * incidental, or consequential damages of any character arising as a + * result of this License or out of the use or inability to use the + * Work (including but not limited to damages for loss of goodwill, + * work stoppage, computer failure or malfunction, or any and all + * other commercial damages or losses), even if such Contributor + * has been advised of the possibility of such damages. + * + * 9. Accepting Warranty or Additional Liability. While redistributing + * the Work or Derivative Works thereof, You may choose to offer, + * and charge a fee for, acceptance of support, warranty, indemnity, + * or other liability obligations and/or rights consistent with this + * License. However, in accepting such obligations, You may act only + * on Your own behalf and on Your sole responsibility, not on behalf + * of any other Contributor, and only if You agree to indemnify, + * defend, and hold each Contributor harmless for any liability + * incurred by, or claims asserted against, such Contributor by reason + * of your accepting any such warranty or additional liability. + * + * END OF TERMS AND CONDITIONS + * + * APPENDIX: How to apply the Apache License to your work. + * + * To apply the Apache License to your work, attach the following + * boilerplate notice, with the fields enclosed by brackets "[]" + * replaced with your own identifying information. (Don't include + * the brackets!) The text should be enclosed in the appropriate + * comment syntax for the file format. We also recommend that a + * file or class name and description of purpose be included on the + * same "printed page" as the copyright notice for easier + * identification within third-party archives. + * + * Copyright [yyyy] Apache Software Foundation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + +You can download the original license file here. + +The License is accompanied by a NOTICE + + ========================================================================= + == NOTICE file corresponding to the section 4 d of == + == the Apache License, Version 2.0, == + == in this case for the Apache Ant distribution. == + ========================================================================= + This product includes software developed by + The Apache Software Foundation (http://www.apache.org/). + +This product includes also software developed by : - the W3C consortium + (http://www.w3c.org) , - the SAX project (http://www.saxproject.org) + +Please read the different LICENSE files present in the root directory of this +distribution. + +The names "Ant" and "Apache Software Foundation" must not be used to endorse or +promote products derived from this software without prior written permission. +For written permission, please contact apache@apache.org. + +The Apache Software License, Version 1.1 + +The Apache Software License, Version 1.1, applies to all versions of up to +ant1.6.0 included. + +/* + * ============================================================================ + * The Apache Software License, Version 1.1 + * ============================================================================ + * + * Copyright (C) 2000-2003 The Apache Software Foundation. All + * rights reserved. + * + * Redistribution and use in source and binary forms, with or without modifica- + * tion, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The end-user documentation included with the redistribution, if any, must + * include the following acknowledgment: "This product includes software + * developed by the Apache Software Foundation (http://www.apache.org/)." + * Alternately, this acknowledgment may appear in the software itself, if + * and wherever such third-party acknowledgments normally appear. + * + * 4. The names "Ant" and "Apache Software Foundation" must not be used to + * endorse or promote products derived from this software without prior + * written permission. For written permission, please contact + * apache@apache.org. + * + * 5. Products derived from this software may not be called "Apache", nor may + * "Apache" appear in their name, without prior written permission of the + * Apache Software Foundation. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLU- + * DING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This software consists of voluntary contributions made by many individuals + * on behalf of the Apache Software Foundation. For more information on the + * Apache Software Foundation, please see http://www.apache.org. + * + */ + + +%% The following software may be included in this product: XML Resolver +library; Use of any of this software is governed by the terms of the license +below: + + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + +TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by the + copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all other + entities that control, are controlled by, or are under common control + with that entity. For the purposes of this definition, "control" means + (i) the power, direct or indirect, to cause the direction or management + of such entity, whether by contract or otherwise, or (ii) ownership of + fifty percent (50%) or more of the outstanding shares, or + (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity exercising + permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation source, + and configuration files. + + "Object" form shall mean any form resulting from mechanical transformation + or translation of a Source form, including but not limited to compiled + object code, generated documentation, and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or Object + form, made available under the License, as indicated by a copyright + notice that is included in or attached to the work (an example is + provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces + of, the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including the original + version of the Work and any modifications or additions to that Work or + Derivative Works thereof, that is intentionally submitted to Licensor + for inclusion in the Work by the copyright owner or by an individual + or Legal Entity authorized to submit on behalf of the copyright owner. + For the purposes of this definition, "submitted" means any form of + electronic, verbal, or written communication sent to the Licensor or + its representatives, including but not limited to communication on + electronic mailing lists, source code control systems, and issue + tracking systems that are managed by, or on behalf of, the Licensor + for the purpose of discussing and improving the Work, but excluding + communication that is conspicuously marked or otherwise designated + in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright + license to reproduce, prepare Derivative Works of, publicly display, + publicly perform, sublicense, and distribute the Work and such + Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of this + License, each Contributor hereby grants to You a perpetual, worldwide, + non-exclusive, no-charge, royalty-free, irrevocable (except as stated + in this section) patent license to make, have made, use, offer to sell, + sell, import, and otherwise transfer the Work, where such license + applies only to those patent claims licensable by such Contributor + that are necessarily infringed by their Contribution(s) alone or by + combination of their Contribution(s) with the Work to which such + Contribution(s) was submitted. If You institute patent litigation + against any entity (including a cross-claim or counterclaim in a + lawsuit) alleging that the Work or a Contribution incorporated within + the Work constitutes direct or contributory patent infringement, then + any patent licenses granted to You under this License for that Work + shall terminate as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the Work + or Derivative Works thereof in any medium, with or without modifications, + and in Source or Object form, provided that You meet the following + conditions: + + (a) You must give any other recipients of the Work or Derivative Works + a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works that + You distribute, all copyright, patent, trademark, and attribution notices + from the Source form of the Work, excluding those notices that do not + pertain to any part of the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its distribution, + then any Derivative Works that You distribute must include a readable copy + of the attribution notices contained within such NOTICE file, excluding + those notices that do not pertain to any part of the Derivative Works, in + at least one of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or documentation, + if provided along with the Derivative Works; or, within a display generated + by the Derivative Works, if and wherever such third-party notices normally + appear. The contents of the NOTICE file are for informational purposes only + and do not modify the License. You may add Your own attribution notices + within Derivative Works that You distribute, alongside or as an addendum to + the NOTICE text from the Work, provided that such additional attribution + notices cannot be construed as modifying the License. + + You may add Your own copyright statement to Your modifications and may provide + additional or different license terms and conditions for use, reproduction, + or distribution of Your modifications, or for any such Derivative Works as a + whole, provided Your use, reproduction, and distribution of the Work otherwise + complies with the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, any + Contribution intentionally submitted for inclusion in the Work by You to + the Licensor shall be under the terms and conditions of this License, without + any additional terms or conditions. Notwithstanding the above, nothing herein + shall supersede or modify the terms of any separate license agreement you may + have executed with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade names, + trademarks, service marks, or product names of the Licensor, except as required + for reasonable and customary use in describing the origin of the Work and + reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in + writing, Licensor provides the Work (and each Contributor provides its + Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF + ANY KIND, either express or implied, including, without limitation, any + warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or + FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining + the appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, whether + in tort (including negligence), contract, or otherwise, unless required by + applicable law (such as deliberate and grossly negligent acts) or agreed to + in writing, shall any Contributor be liable to You for damages, including + any direct, indirect, special, incidental, or consequential damages of any + character arising as a result of this License or out of the use or inability + to use the Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all other + commercial damages or losses), even if such Contributor has been advised + of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing the Work + or Derivative Works thereof, You may choose to offer, and charge a fee for, + acceptance of support, warranty, indemnity, or other liability obligations + and/or rights consistent with this License. However, in accepting such + obligations, You may act only on Your own behalf and on Your sole + responsibility, not on behalf of any other Contributor, and only if You + agree to indemnify, defend, and hold each Contributor harmless for any + liability incurred by, or claims asserted against, such Contributor by + reason of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following boilerplate notice, + with the fields enclosed by brackets "[]" replaced with your own identifying + information. (Don't include the brackets!) The text should be enclosed in the + appropriate comment syntax for the file format. We also recommend that a file + or class name and description of purpose be included on the same "printed page" + as the copyright notice for easier identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); you may not use + this file except in compliance with the License. You may obtain a copy of the + License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software distributed + under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, either express or implied. See the License for the + specific language governing permissions and limitations under the License. + + +%% The following software may be included in this product: ICU4J; Use of any of +this software is governed by the terms of the license below: + +ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright (c) + +1995-2003 International Business Machines Corporation and others All rights + reserved Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the "Software"), to + deal in the Software without restriction, including without limitation the + rights to use, copy, modify, merge, publish, distribute, and/or sell copies of + the Software, and to permit persons to whom the Software is furnished to do + so,provided that the above copyright notice(s) and this permission notice + appear in all copies of the Software and that both the above copyright + notice(s) and this permission notice appear in supporting documentation. THE + SOFTWARE IS PROVIDED"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + INCLUDING BUT NOTLIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + PARTICULAR PURPOSEAND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL + THE COPYRIGHTHOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, + OR ANYSPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER + RESULTINGFROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, + NEGLIGENCEOR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE + USE ORPERFORMANCE OF THIS SOFTWARE. Except as contained in this notice, the + name of a copyright holder shall not be used in advertising or otherwise to + promote the sale, use or other dealings in this Software without prior written + authorization of the copyright holder. + + +%% The following software may be included in this product: NekoHTML; Use of any +of this software is governed by the terms of the license below: The CyberNeko +Software License, Version 1.0 + + +(C) Copyright 2002,2003, Andy Clark. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + +3. The end-user documentation included with the redistribution, + if any, must include the following acknowledgment: + "This product includes software developed by Andy Clark." + Alternately, this acknowledgment may appear in the software itself, + if and wherever such third-party acknowledgments normally appear. + +4. The names "CyberNeko" and "NekoHTML" must not be used to endorse + or promote products derived from this software without prior + written permission. For written permission, please contact + andy@cyberneko.net. + +5. Products derived from this software may not be called "CyberNeko", + nor may "CyberNeko" appear in their name, without prior written + permission of the author. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +OR OTHER CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT +OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING +IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. + +==================================================================== +This license is based on the Apache Software License, version 1.1 + + +%% The following software may be included in this product: Jing; Use of any of +this software is governed by the terms of the license below: Jing Copying +Conditions + +Copyright (c) 2001-2003 Thai Open Source Software Center Ltd All rights +reserved. + +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice,this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + * Neither the name of the Thai Open Source Software Center Ltd nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +ANDANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +AREDISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR +ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +%% The following software may be included in this product: RelaxNGCC; Use of +any of this software is governed by the terms of the license below: + +Copyright (c) 2000-2003 Daisuke Okajima and Kohsuke Kawaguchi. +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +1. Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright +notice, this list of conditions and the following disclaimer in the +documentation and/or other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if +any, must include the following acknowledgment: + + "This product includes software developed by Daisuke Okajima + and Kohsuke Kawaguchi (http://relaxngcc.sf.net/)." + +Alternately, this acknowledgment may appear in the software itself, +if and wherever such third-party acknowledgments normally appear. + +4. The names of the copyright holders must not be used to endorse or +promote products derived from this software without prior written +permission. For written permission, please contact the copyright +holders. + +5. Products derived from this software may not be called "RELAXNGCC", +nor may "RELAXNGCC" appear in their name, without prior written +permission of the copyright holders. + +THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: RELAX NG Object +Model/Parser; Use of any of this software is governed by the terms of the +license below: The MIT License + +Copyright (c) + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do +so,subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS ORCOPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +WHETHERIN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR +INCONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + + +%% The following software may be included in this product: XFree86-VidMode +Extension; Use of any of this software is governed by the terms of the license +below: Version 1.1 of Project Licence. + + Copyright (C) 1994-2004 The Project, Inc. All rights reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicence, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do +so,subject to the following conditions: + +1. Redistributions of source code must retain the above copyright notice,this +list of conditions, and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution, and in the same place and form +as other copyright, license and disclaimer information. + +3. The end-user documentation included with the redistribution, if any,must +include the following acknowledgment: "This product includes software developed +by The XFree86 Project, Inc (http://www.xfree86.org/) and its contributors", in +the same place and form as other third-party acknowledgments. Alternately, this +acknowledgment may appear in the software itself, in the same form and location +as other such third-party acknowledgments. + +4. Except as contained in this notice, the name of The XFree86 Project,Inc +shall not be used in advertising or otherwise to promote the sale, use or other +dealings in this Software without prior written authorization from TheXFree86 +Project, Inc. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT +SHALL THE XFREE86PROJECT, INC OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL,SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER INCONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISINGIN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED +OF THE POSSIBILITYOF SUCH DAMAGE. + + +%% The following software may be included in this product: RelaxNGCC; Use of +any of this software is governed by the terms of the license below: This is +version 2003-May-08 of the Info-ZIP copyright and license. The definitive +version of this document should be available at +ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely. + + +Copyright (c) 1990-2003 Info-ZIP. All rights reserved. + +For the purposes of this copyright and license, "Info-ZIP" is defined asthe +following set of individuals: + + Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup + Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, + Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, + Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, + Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, + Dave Smith, Christian Spieler, Antoine Verheijen, Paul von Behren, Rich + Wales, Mike White + +This software is provided "as is," without warranty of any kind, express or +implied. In no event shall Info-ZIP or its contributors be held liable for any +direct, indirect, incidental, special or consequential damages arising out of +the use of or inability to use this software. + +Permission is granted to anyone to use this software for any purpose, including +commercial applications, and to alter it and redistribute it freely, subject to +the following restrictions: + +1. Redistributions of source code must retain the above copyright notice, +definition, disclaimer, and this list of conditions. + +2. Redistributions in binary form (compiled executables) must reproduce the +above copyright notice, definition, disclaimer, and this list of conditions in +documentation and/or other materials provided with the distribution. The sole +exception to this condition is redistribution of a standard UnZipSFX binary +(including SFXWiz) as part of a self-extracting archive; that is permitted +without inclusion of this license, as long as the normal SFX banner has not been +removed from the binary or disabled. + +3. Altered versions--including, but not limited to, ports to new operating +systems, existing ports with new graphical interfaces, and dynamic, shared, or +static library versions--must be plainly marked as such and must not be +misrepresented as being the original source. Such altered versions also must +not be misrepresented as being Info-ZIP releases--including, but not limited to, +labeling of the altered versions with the names "Info-ZIP" (or any variation +thereof, including, but not limited to, different capitalizations), "Pocket +UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such +altered versions are further prohibited from misrepresentative use of the +Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s). + +4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," +"UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source +and binary releases. + + +%% The following software may be included in this product: XML Security; Use of + any of this software is governed by the terms of the license below: The + Apache Software License, Version 1.1 PDF + +Copyright (C) 2002 The Apache Software Foundation. + +All rights reserved. Redistribution and use in source and binary forms, with or +without modifica- tion, are permitted provided that the following conditions are +met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if any,must +include the following acknowledgment:"This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names"Apache Forrest" and "Apache Software Foundation" must not be used +to endorse or promote products derived from this software without prior written +permission. For written permission,please contact apache@apache.org. 5. +Products derived from this software may not be called "Apache", normay "Apache" +appear in their name, without prior written permission of the Apache Software +Foundation. THIS SOFTWARE IS PROVIDED``AS IS'' AND ANY EXPRESSED OR IMPLIED +WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY +DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS +OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANYTHEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING +NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This software consists of +voluntary contributions made by many individuals on behalf of the Apache +Software Foundation. For more information on the Apache Software Foundation, +please see http://www.apache.org. + + +%% The following software may be included in this product: Regexp, Regular +Expression Package v. 1.2; Use of any of this software is governed by the terms +of the license below: The Apache Software License, Version 1.1 Copyright (c) +2001 The Apache Software Foundation. All rights reserved. Redistribution and +use in source and binary forms, with or without modification,are permitted +provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" +must not be used to endorse or promote products derived from this software +without prior written permission. For written permission, please contact +apache@apache.org. + +5. Products derived from this software may not be called "Apache", "Apache +Turbine", nor may "Apache" appear in their name, without prior written +permission of the Apache Software Foundation. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. + +======================================================================== + + +%% The following software may be included in this product: zlib; Use of any of +this software is governed by the terms of the license below: + +zlib.h -- interface of the 'zlib' general purpose compression library + version 1.1.3, July 9th, 1998 + + Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format + + +%% The following software may be included in this product: Mozilla Rhino. Use +of any of this software is governed by the terms of the license below: + + * The contents of this file are subject to the Netscape Public + * License Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.mozilla.org/NPL/ + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * The Original Code is Rhino code, released + * May 6, 1999. + * + * The Initial Developer of the Original Code is Netscape + * Communications Corporation. Portions created by Netscape are + * Copyright (C) 1997-2000 Netscape Communications Corporation. All + * Rights Reserved. + * + * Contributor(s): + * + * Kemal Bayram + * Patrick Beard + * Norris Boyd + * Igor Bukanov, igor@mir2.org + * Brendan Eich + * Ethan Hugg + * Roger Lawrence + * Terry Lucas + * Mike McCabe + * Milen Nankov + * Attila Szegedi, szegedia@freemail.hu + * Ian D. Stewart + * Andi Vajda + * Andrew Wason + */ + +%% The following software may be included in this product: Apache Derby. Use +of any of this software is governed by the terms of the license below: + + + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + +%% The following software may be included in this product: 7-Zip. Use of any +of this software is governed by the terms of the license below: + + ~~~~~ + License for use and distribution + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + 7-Zip Copyright (C) 1999-2007 Igor Pavlov. + + Licenses for files are: + + 1) 7z.dll: GNU LGPL + AES code license + unRAR restriction + 2) 7za.exe, 7z.sfx and 7zCon.sfx: GNU LGPL + AES code license + 3) All other files: GNU LGPL + + The GNU LGPL + AES code license + unRAR restriction means that you must follow + GNU LGPL rules, AES code license rules and unRAR restriction rules. + + The GNU LGPL + AES code license means that you must follow both GNU LGPL rules + and AES code license rules. + + + Note: + You can use 7-Zip on any computer, including a computer in a commercial + organization. You don't need to register or pay for 7-Zip. + + + GNU LGPL information + -------------------- + +GNU Lesser General Public License + +Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + [This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + +Preamble + +The licenses for most software are designed to take away your freedom to share +and change it. By contrast, the GNU General Public Licenses are intended to +guarantee your freedom to share and change free software--to make sure the +software is free for all its users. + +This license, the Lesser General Public License, applies to some specially +designated software packages--typically libraries--of the Free Software +Foundation and other authors who decide to use it. You can use it too, but we +suggest you first think carefully about whether this license or the ordinary +General Public License is the better strategy to use in any particular case, +based on the explanations below. + +When we speak of free software, we are referring to freedom of use, not price. +Our General Public Licenses are designed to make sure that you have the freedom +to distribute copies of free software (and charge for this service if you wish); +that you receive source code or can get it if you want it; that you can change +the software and use pieces of it in new free programs; and that you are +informed that you can do these things. + +To protect your rights, we need to make restrictions that forbid distributors to +deny you these rights or to ask you to surrender these rights. These +restrictions translate to certain responsibilities for you if you distribute +copies of the library or if you modify it. + +For example, if you distribute copies of the library, whether gratis or for a +fee, you must give the recipients all the rights that we gave you. You must +make sure that they, too, receive or can get the source code. If you link other +code with the library, you must provide complete object files to the recipients, +so that they can relink them with the library after making changes to the +library and recompiling it. And you must show them these terms so they know +their rights. + +We protect your rights with a two-step method: (1) we copyright the library, +and (2) we offer you this license, which gives you legal permission to copy, +distribute and/or modify the library. + +To protect each distributor, we want to make it very clear that there is no +warranty for the free library. Also, if the library is modified by someone else +and passed on, the recipients should know that what they have is not the +original version, so that the original author's reputation will not be affected +by problems that might be introduced by others. + +Finally, software patents pose a constant threat to the existence of any free +program. We wish to make sure that a company cannot effectively restrict the +users of a free program by obtaining a restrictive license from a patent holder. +Therefore, we insist that any patent license obtained for a version of the +library must be consistent with the full freedom of use specified in this +license. + +Most GNU software, including some libraries, is covered by the ordinary GNU +General Public License. This license, the GNU Lesser General Public License, +applies to certain designated libraries, and is quite different from the +ordinary General Public License. We use this license for certain libraries in +order to permit linking those libraries into non-free programs. + +When a program is linked with a library, whether statically or using a shared +library, the combination of the two is legally speaking a combined work, a +derivative of the original library. The ordinary General Public License +therefore permits such linking only if the entire combination fits its criteria +of freedom. The Lesser General Public License permits more lax criteria for +linking other code with the library. + +We call this license the "Lesser" General Public License because it does Less to +protect the user's freedom than the ordinary General Public License. It also +provides other free software developers Less of an advantage over competing +non-free programs. These disadvantages are the reason we use the ordinary +General Public License for many libraries. However, the Lesser license provides +advantages in certain special circumstances. + +For example, on rare occasions, there may be a special need to encourage the +widest possible use of a certain library, so that it becomes a de-facto +standard. To achieve this, non-free programs must be allowed to use the +library. A more frequent case is that a free library does the same job as +widely used non-free libraries. In this case, there is little to gain by +limiting the free library to free software only, so we use the Lesser General +Public License. + +In other cases, permission to use a particular library in non-free programs +enables a greater number of people to use a large body of free software. For +example, permission to use the GNU C Library in non-free programs enables many +more people to use the whole GNU operating system, as well as its variant, the +GNU/Linux operating system. + +Although the Lesser General Public License is Less protective of the users' +freedom, it does ensure that the user of a program that is linked with the +Library has the freedom and the wherewithal to run that program using a modified +version of the Library. + +The precise terms and conditions for copying, distribution and modification +follow. Pay close attention to the difference between a "work based on the +library" and a "work that uses the library". The former contains code derived +from the library, whereas the latter must be combined with the library in order +to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + +0. This License Agreement applies to any software library or other program +which contains a notice placed by the copyright holder or other authorized party +saying it may be distributed under the terms of this Lesser General Public +License (also called "this License"). Each licensee is addressed as "you". + +A "library" means a collection of software functions and/or data prepared so as +to be conveniently linked with application programs (which use some of those +functions and data) to form executables. + +The "Library", below, refers to any such software library or work which has been +distributed under these terms. A "work based on the Library" means either the +Library or any derivative work under copyright law: that is to say, a work +containing the Library or a portion of it, either verbatim or with modifications +and/or translated straightforwardly into another language. (Hereinafter, +translation is included without limitation in the term "modification".) + +"Source code" for a work means the preferred form of the work for making +modifications to it. For a library, complete source code means all the source +code for all modules it contains, plus any associated interface definition +files, plus the scripts used to control compilation and installation of the +library. + +Activities other than copying, distribution and modification are not covered by +this License; they are outside its scope. The act of running a program using +the Library is not restricted, and output from such a program is covered only if +its contents constitute a work based on the Library (independent of the use of +the Library in a tool for writing it). Whether that is true depends on what the +Library does and what the program that uses the Library does. + +1. You may copy and distribute verbatim copies of the Library's complete source +code as you receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice and +disclaimer of warranty; keep intact all the notices that refer to this License +and to the absence of any warranty; and distribute a copy of this License along +with the Library. + +You may charge a fee for the physical act of transferring a copy, and you may at +your option offer warranty protection in exchange for a fee. + +2. You may modify your copy or copies of the Library or any portion of it, thus +forming a work based on the Library, and copy and distribute such modifications +or work under the terms of Section 1 above, provided that you also meet all of +these conditions: + +a) The modified work must itself be a software library. + +b) You must cause the files modified to carry prominent notices stating that you +changed the files and the date of any change. + +c) You must cause the whole of the work to be licensed at no charge to all third +parties under the terms of this License. + +d) If a facility in the modified Library refers to a function or a table of data +to be supplied by an application program that uses the facility, other than as +an argument passed when the facility is invoked, then you must make a good faith +effort to ensure that, in the event an application does not supply such function +or table, the facility still operates, and performs whatever part of its purpose +remains meaningful. + +(For example, a function in a library to compute square roots has a purpose that +is entirely well-defined independent of the application. Therefore, Subsection +2d requires that any application-supplied function or table used by this +function must be optional: if the application does not supply it, the square +root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If identifiable +sections of that work are not derived from the Library, and can be reasonably +considered independent and separate works in themselves, then this License, and +its terms, do not apply to those sections when you distribute them as separate +works. But when you distribute the same sections as part of a whole which is a +work based on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the entire whole, +and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest your +rights to work written entirely by you; rather, the intent is to exercise the +right to control the distribution of derivative or collective works based on the +Library. + +In addition, mere aggregation of another work not based on the Library with the +Library (or with a work based on the Library) on a volume of a storage or +distribution medium does not bring the other work under the scope of this +License. + +3. You may opt to apply the terms of the ordinary GNU General Public License +instead of this License to a given copy of the Library. To do this, you must +alter all the notices that refer to this License, so that they refer to the +ordinary GNU General Public License, version 2, instead of to this License. (If +a newer version than version 2 of the ordinary GNU General Public License has +appeared, then you can specify that version instead if you wish.) Do not make +any other change in these notices. + +Once this change is made in a given copy, it is irreversible for that copy, so +the ordinary GNU General Public License applies to all subsequent copies and +derivative works made from that copy. + +This option is useful when you wish to copy part of the code of the Library into +a program that is not a library. + +4. You may copy and distribute the Library (or a portion or derivative of it, +under Section 2) in object code or executable form under the terms of Sections 1 +and 2 above provided that you accompany it with the complete corresponding +machine-readable source code, which must be distributed under the terms of +Sections 1 and 2 above on a medium customarily used for software interchange. + +If distribution of object code is made by offering access to copy from a +designated place, then offering equivalent access to copy the source code from +the same place satisfies the requirement to distribute the source code, even +though third parties are not compelled to copy the source along with the object +code. + +5. A program that contains no derivative of any portion of the Library, but is +designed to work with the Library by being compiled or linked with it, is called +a "work that uses the Library". Such a work, in isolation, is not a derivative +work of the Library, and therefore falls outside the scope of this License. + +However, linking a "work that uses the Library" with the Library creates an +executable that is a derivative of the Library (because it contains portions of +the Library), rather than a "work that uses the library". The executable is +therefore covered by this License. Section 6 states terms for distribution of +such executables. + +When a "work that uses the Library" uses material from a header file that is +part of the Library, the object code for the work may be a derivative work of +the Library even though the source code is not. Whether this is true is +especially significant if the work can be linked without the Library, or if the +work is itself a library. The threshold for this to be true is not precisely +defined by law. + +If such an object file uses only numerical parameters, data structure layouts +and accessors, and small macros and small inline functions (ten lines or less in +length), then the use of the object file is unrestricted, regardless of whether +it is legally a derivative work. (Executables containing this object code plus +portions of the Library will still fall under Section 6.) + +Otherwise, if the work is a derivative of the Library, you may distribute the +object code for the work under the terms of Section 6. Any executables +containing that work also fall under Section 6, whether or not they are linked +directly with the Library itself. + +6. As an exception to the Sections above, you may also combine or link a "work +that uses the Library" with the Library to produce a work containing portions of +the Library, and distribute that work under terms of your choice, provided that +the terms permit modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + +You must give prominent notice with each copy of the work that the Library is +used in it and that the Library and its use are covered by this License. You +must supply a copy of this License. If the work during execution displays +copyright notices, you must include the copyright notice for the Library among +them, as well as a reference directing the user to the copy of this License. +Also, you must do one of these things: + +a) Accompany the work with the complete corresponding machine-readable source +code for the Library including whatever changes were used in the work (which +must be distributed under Sections 1 and 2 above); and, if the work is an +executable linked with the Library, with the complete machine-readable "work +that uses the Library", as object code and/or source code, so that the user can +modify the Library and then relink to produce a modified executable containing +the modified Library. (It is understood that the user who changes the contents +of definitions files in the Library will not necessarily be able to recompile +the application to use the modified definitions.) + +b) Use a suitable shared library mechanism for linking with the Library. A +suitable mechanism is one that (1) uses at run time a copy of the library +already present on the user's computer system, rather than copying library +functions into the executable, and (2) will operate properly with a modified +version of the library, if the user installs one, as long as the modified +version is interface-compatible with the version that the work was made with. + +c) Accompany the work with a written offer, valid for at least three years, to +give the same user the materials specified in Subsection 6a, above, for a charge +no more than the cost of performing this distribution. + +d) If distribution of the work is made by offering access to copy from a +designated place, offer equivalent access to copy the above specified materials +from the same place. + +e) Verify that the user has already received a copy of these materials or that +you have already sent this user a copy. + +For an executable, the required form of the "work that uses the Library" must +include any data and utility programs needed for reproducing the executable from +it. However, as a special exception, the materials to be distributed need not +include anything that is normally distributed (in either source or binary form) +with the major components (compiler, kernel, and so on) of the operating system +on which the executable runs, unless that component itself accompanies the +executable. + +It may happen that this requirement contradicts the license restrictions of +other proprietary libraries that do not normally accompany the operating system. +Such a contradiction means you cannot use both them and the Library together in +an executable that you distribute. + +7. You may place library facilities that are a work based on the Library +side-by-side in a single library together with other library facilities not +covered by this License, and distribute such a combined library, provided that +the separate distribution of the work based on the Library and of the other +library facilities is otherwise permitted, and provided that you do these two +things: + +a) Accompany the combined library with a copy of the same work based on the +Library, uncombined with any other library facilities. This must be distributed +under the terms of the Sections above. + +b) Give prominent notice with the combined library of the fact that part of it +is a work based on the Library, and explaining where to find the accompanying +uncombined form of the same work. + +8. You may not copy, modify, sublicense, link with, or distribute the Library +except as expressly provided under this License. Any attempt otherwise to copy, +modify, sublicense, link with, or distribute the Library is void, and will +automatically terminate your rights under this License. However, parties who +have received copies, or rights, from you under this License will not have their +licenses terminated so long as such parties remain in full compliance. + +9. You are not required to accept this License, since you have not signed it. +However, nothing else grants you permission to modify or distribute the Library +or its derivative works. These actions are prohibited by law if you do not +accept this License. Therefore, by modifying or distributing the Library (or +any work based on the Library), you indicate your acceptance of this License to +do so, and all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + +10. Each time you redistribute the Library (or any work based on the Library), +the recipient automatically receives a license from the original licensor to +copy, distribute, link with or modify the Library subject to these terms and +conditions. You may not impose any further restrictions on the recipients' +exercise of the rights granted herein. You are not responsible for enforcing +compliance by third parties with this License. + +11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), conditions +are imposed on you (whether by court order, agreement or otherwise) that +contradict the conditions of this License, they do not excuse you from the +conditions of this License. If you cannot distribute so as to satisfy +simultaneously your obligations under this License and any other pertinent +obligations, then as a consequence you may not distribute the Library at all. +For example, if a patent license would not permit royalty-free redistribution of +the Library by all those who receive copies directly or indirectly through you, +then the only way you could satisfy both it and this License would be to refrain +entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, and +the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any patents or +other property right claims or to contest validity of any such claims; this +section has the sole purpose of protecting the integrity of the free software +distribution system which is implemented by public license practices. Many +people have made generous contributions to the wide range of software +distributed through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing to +distribute software through any other system and a licensee cannot impose that +choice. + +This section is intended to make thoroughly clear what is believed to be a +consequence of the rest of this License. + +12. If the distribution and/or use of the Library is restricted in certain +countries either by patents or by copyrighted interfaces, the original copyright +holder who places the Library under this License may add an explicit +geographical distribution limitation excluding those countries, so that +distribution is permitted only in or among countries not thus excluded. In such +case, this License incorporates the limitation as if written in the body of this +License. + +13. The Free Software Foundation may publish revised and/or new versions of the +Lesser General Public License from time to time. Such new versions will be +similar in spirit to the present version, but may differ in detail to address +new problems or concerns. + +Each version is given a distinguishing version number. If the Library specifies +a version number of this License which applies to it and "any later version", +you have the option of following the terms and conditions either of that version +or of any later version published by the Free Software Foundation. If the +Library does not specify a license version number, you may choose any version +ever published by the Free Software Foundation. + +14. If you wish to incorporate parts of the Library into other free programs +whose distribution conditions are incompatible with these, write to the author +to ask for permission. For software which is copyrighted by the Free Software +Foundation, write to the Free Software Foundation; we sometimes make exceptions +for this. Our decision will be guided by the two goals of preserving the free +status of all derivatives of our free software and of promoting the sharing and +reuse of software generally. + +NO WARRANTY + +15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR +THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE +STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY +"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, +BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + +16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL +ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE +LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, +SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY +TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF +THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER +PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND +CONDITIONS + +How to Apply These Terms to Your New Libraries + +If you develop a new library, and you want it to be of the greatest possible use +to the public, we recommend making it free software that everyone can +redistribute and change. You can do so by permitting redistribution under these +terms (or, alternatively, under the terms of the ordinary General Public +License). + +To apply these terms, attach the following notices to the library. It is safest +to attach them to the start of each source file to most effectively convey the +exclusion of warranty; and each file should have at least the "copyright" line +and a pointer to where the full notice is found. + + <one line to give the library's name and an idea of what it does.> + Copyright (C) <year> <name of author> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your school, +if any, to sign a "copyright disclaimer" for the library, if necessary. Here is +a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in + the library `Frob' (a library for tweaking knobs) written + by James Random Hacker. + + signature of Ty Coon, 1 April 1990 + + Ty Coon, President of Vice + +That's all there is to it! + + + unRAR restriction + ----------------- + + The unRAR sources cannot be used to re-create the RAR compression +algorithm, + which is proprietary. Distribution of modified unRAR sources in separate +form + or as a part of other software is permitted, provided that it is clearly + stated in the documentation and source comments that the code may + not be used to develop a RAR (WinRAR) compatible archiver. + + + AES code license + ---------------- + + Copyright (c) 2001, Dr Brian Gladman + + LICENSE TERMS + + The free distribution and use of this software in both source and binary + form is allowed (with or without changes) provided that: + + 1. distributions of this source code include the above copyright + notice, this list of conditions and the following disclaimer; + + 2. distributions in binary form include the above copyright + notice, this list of conditions and the following disclaimer + in the documentation and/or other associated materials; + + 3. the copyright holder's name is not used to endorse products + built using this software without specific written permission. + + DISCLAIMER + + This software is provided 'as is' with no explicit or implied warranties + in respect of its properties, including, but not limited to, correctness + and fitness for purpose. + + +*************************************************************************** + +%%The following software may be included in this product: +UPX + +Use of any of this software is governed by the terms of the license below: + +-----BEGIN PGP SIGNED MESSAGE----- + + + ooooo ooo ooooooooo. ooooooo ooooo + `888' `8' `888 `Y88. `8888 d8' + 888 8 888 .d88' Y888..8P + 888 8 888ooo88P' `8888' + 888 8 888 .8PY888. + `88. .8' 888 d8' `888b + `YbodP' o888o o888o o88888o + + + The Ultimate Packer for eXecutables + Copyright (c) 1996-2000 Markus Oberhumer & Laszlo Molnar + http://wildsau.idv.uni-linz.ac.at/mfx/upx.html + http://www.nexus.hu/upx + http://upx.tsx.org + + +PLEASE CAREFULLY READ THIS LICENSE AGREEMENT, ESPECIALLY IF YOU PLAN +TO MODIFY THE UPX SOURCE CODE OR USE A MODIFIED UPX VERSION. + + +ABSTRACT +======== + + UPX and UCL are copyrighted software distributed under the terms + of the GNU General Public License (hereinafter the "GPL"). + + The stub which is imbedded in each UPX compressed program is part + of UPX and UCL, and contains code that is under our copyright. The + terms of the GNU General Public License still apply as compressing + a program is a special form of linking with our stub. + + As a special exception we grant the free usage of UPX for all + executables, including commercial programs. + See below for details and restrictions. + + +COPYRIGHT +========= + + UPX and UCL are copyrighted software. All rights remain with the authors. + + UPX is Copyright (C) 1996-2000 Markus Franz Xaver Johannes Oberhumer + UPX is Copyright (C) 1996-2000 Laszlo Molnar + + UCL is Copyright (C) 1996-2000 Markus Franz Xaver Johannes Oberhumer + + +GNU GENERAL PUBLIC LICENSE +========================== + + UPX and the UCL library are free software; you can redistribute them + and/or modify them under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + UPX and UCL are distributed in the hope that they will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. + + +SPECIAL EXCEPTION FOR COMPRESSED EXECUTABLES +============================================ + + The stub which is imbedded in each UPX compressed program is part + of UPX and UCL, and contains code that is under our copyright. The + terms of the GNU General Public License still apply as compressing + a program is a special form of linking with our stub. + + Hereby Markus F.X.J. Oberhumer and Laszlo Molnar grant you special + permission to freely use and distribute all UPX compressed programs + (including commercial ones), subject to the following restrictions: + + 1. You must compress your program with a completely unmodified UPX + version; either with our precompiled version, or (at your option) + with a self compiled version of the unmodified UPX sources as + distributed by us. + 2. This also implies that the UPX stub must be completely unmodfied, i.e. + the stub imbedded in your compressed program must be byte-identical + to the stub that is produced by the official unmodified UPX version. + 3. The decompressor and any other code from the stub must exclusively get + used by the unmodified UPX stub for decompressing your program at + program startup. No portion of the stub may get read, copied, + called or otherwise get used or accessed by your program. + + +ANNOTATIONS +=========== + + - You can use a modified UPX version or modified UPX stub only for + programs that are compatible with the GNU General Public License. + + - We grant you special permission to freely use and distribute all UPX + compressed programs. But any modification of the UPX stub (such as, + but not limited to, removing our copyright string or making your + program non-decompressible) will immediately revoke your right to + use and distribute a UPX compressed program. + + - UPX is not a software protection tool; by requiring that you use + the unmodified UPX version for your proprietary programs we + make sure that any user can decompress your program. This protects + both you and your users as nobody can hide malicious code - + any program that cannot be decompressed is highly suspicious + by definition. + + - You can integrate all or part of UPX and UCL into projects that + are compatible with the GNU GPL, but obviously you cannot grant + any special exceptions beyond the GPL for our code in your project. + + - We want to actively support manufacturers of virus scanners and + similar security software. Please contact us if you would like to + incorporate parts of UPX or UCL into such a product. + + + +Markus F.X.J. Oberhumer Laszlo Molnar +markus.oberhumer@jk.uni-linz.ac.at ml1050@cdata.tvnet.hu + +Linz, Austria, 25 Feb 2000 + +Additional License(s) + +The UPX license file is at http://upx.sourceforge.net/upx-license.html. + +*************************************************************************** + +%%The following software may be included in this product: +LZMA Software Development Kit + +Use of any of this software is governed by the terms of the license below: + +License + +LZMA SDK is available under any of the following licenses: + + 1. GNU Lesser General Public License (GNU LGPL) + 2. Common Public License (CPL) + 3. Simplified license for unmodified code (read SPECIAL EXCEPTION) + 4. Proprietary license + +This means that you can select one of these four options and follow rules of +that license. + +SPECIAL EXCEPTION: Igor Pavlov, as the author of this code, expressly permit +you statically or dynamically to link your code (or bind by name) to the files +from LZMA SDK without subjecting your linked code to the terms of the CPL or GNU +LGPL. Any modification or addition to any file in the LZMA SDK, however, is +subject to the GNU LGPL or CPL terms. + +This SPECIAL EXCEPTION allows you to use LZMA SDK in applications with +proprietary code, provided you keep the LZMA SDK code unmodified. + +SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly +permits you to use LZMA SDK 4.43 under the same terms and conditions contained +in the License Agreement you have for any previous version of LZMA SDK developed +by Igor Pavlov. + +SPECIAL EXCEPTION #2 allows holders of proprietary licenses to use latest +version of LZMA SDK as update for previous versions. + +GNU LGPL and CPL are pretty similar and both these licenses are classified as +free software licenses at http://www.gnu.org/ and OSI-approved at +http://www.opensource.org/. + +LZMA SDK also is available under a proprietary license which can include: + +1. The right to modify code from the LZMA SDK without subjecting the modified +code to the terms of the CPL or GNU LGPL + +2. Technical support for LZMA SDK via email + +To request such a proprietary license, or for any additional consultations, send +an email message, using the 7-Zip support page: Send message to LZMA developer + +The source code of 7-Zip is released under the terms of the GNU LGPL. You can +download the source code of 7-Zip at 7-Zip's Source Forge Page + +Additional License(s) + +The license included with the software differs slightly from the version posted +on the website. Specifically it includes SPECIAL EXCEPTION #3, which is not +present in the license on the website. The license from the software archive +follows: + +LICENSE +------- + +LZMA SDK is available under any of the following licenses: + +1) GNU Lesser General Public License (GNU LGPL) +2) Common Public License (CPL) +3) Simplified license for unmodified code (read SPECIAL EXCEPTION) +4) Proprietary license + +It means that you can select one of these four options and follow rules of that license. + + +1,2) GNU LGPL and CPL licenses are pretty similar and both these licenses are +classified as + - "Free software licenses" at http://www.gnu.org/ + - "OSI-approved" at http://www.opensource.org/ + + +3) SPECIAL EXCEPTION + +Igor Pavlov, as the author of this code, expressly permits you to statically or +dynamically link your code (or bind by name) to the files from LZMA SDK without +subjecting your linked code to the terms of the CPL or GNU LGPL. Any +modifications or additions to files from LZMA SDK, however, are subject to the +GNU LGPL or CPL terms. + +SPECIAL EXCEPTION allows you to use LZMA SDK in applications with closed code, +while you keep LZMA SDK code unmodified. + + +SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly +permits you to use this code under the same terms and conditions contained in +the License Agreement you have for any previous version of LZMA SDK developed by +Igor Pavlov. + +SPECIAL EXCEPTION #2 allows owners of proprietary licenses to use latest version +of LZMA SDK as update for previous versions. + + +SPECIAL EXCEPTION #3: Igor Pavlov, as the author of this code, expressly +permits you to use code of the following files: BranchTypes.h, LzmaTypes.h, +LzmaTest.c, LzmaStateTest.c, LzmaAlone.cpp, LzmaAlone.cs, LzmaAlone.java as +public domain code. + + +4) Proprietary license + +LZMA SDK also can be available under a proprietary license which +can include: + +1) Right to modify code without subjecting modified code to the terms of the CPL or GNU LGPL +2) Technical support for code + +To request such proprietary license or any additional consultations, send email +message from that page:http://www.7-zip.org/support.html + + +You should have received a copy of the GNU Lesser General Public License along +with this library; if not, write to the Free Software Foundation, Inc., 59 +Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You should have received a copy of the Common Public License along with this +library. diff --git a/extra/source/jdk-6/jdk.SlackBuild b/extra/source/jdk-6/jdk.SlackBuild index 6c984d583..02eef970c 100755 --- a/extra/source/jdk-6/jdk.SlackBuild +++ b/extra/source/jdk-6/jdk.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,8 +21,8 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=6u16 -DVER=1.6.0_16 +VERSION=6u20 +DVER=1.6.0_20 ARCH=x86_64 # only determines the lib path locations JAVA_ARCH=${JAVA_ARCH:-x64} # or i586 if you want the 32bit version BUILD=${BUILD:-1} diff --git a/extra/source/jdk-6/register.html b/extra/source/jdk-6/register.html index 916ee3701..259a70fa7 100644 --- a/extra/source/jdk-6/register.html +++ b/extra/source/jdk-6/register.html @@ -23,12 +23,12 @@ a:visited,a:visited code{color:#917E9C} <tr> <td width="7" height="78"> </td> <td width="794" align="left" valign="top"> - <img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_15/jre/lib/servicetag/jdk_header.png" width="783" height="63"></td> + <img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_20/jre/lib/servicetag/jdk_header.png" width="783" height="63"></td> </tr> <tr> <td> </td> <td><p class="style1">Thank you for installing the - <strong> Java Development Kit Version 6 Update 15 </strong> + <strong> Java Development Kit Version 6 Update 20 </strong> from Sun Microsystems. </p> <p class="style1">Registering your product will give you the following benefits:</p> <ul class="style1"> @@ -42,8 +42,8 @@ a:visited,a:visited code{color:#917E9C} <table width="708" border="0" cellspacing="0" cellpadding="3"> <tr valign="top"> <td width="126" height="35"> - <form name="form1" method="post" action="https://inventory.sun.com/RegistrationWeb/register/urn:st:39938c22-57ad-43b4-8953-b7833a960447?product=jdk&locale=en" enctype="text/xml"> - <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>00000000</hostId><osName>Linux</osName><osVersion>2.6.29.6</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>gigabyte technology co., ltd.</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>serial number</serialNumber></environment><registry urn=%22urn:st:39938c22-57ad-43b4-8953-b7833a960447%22 version=%221.0%22><service_tag><instance_urn>urn:st:771d40cb-57e3-4969-b32a-769e55e82934</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_15</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_15-b03 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_15/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2009-08-06 00:48:47 GMT</timestamp><container>global</container><source>jdk-6u15-fcs-bin-b03-linux-amd64-02_jul_2009.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>"> + <form name="form1" method="post" action="https://inventory.sun.com/RegistrationWeb/register/urn:st:b1330404-f0ee-4a41-a965-2f4bd7482e3b?product=jdk&locale=en" enctype="text/xml"> + <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>a8c0265d</hostId><osName>Linux</osName><osVersion>2.6.33.3</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>emachines</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>ptnba0200193508e052700</serialNumber></environment><registry urn=%22urn:st:b1330404-f0ee-4a41-a965-2f4bd7482e3b%22 version=%221.0%22><service_tag><instance_urn>urn:st:4f6e7c38-ac6f-41da-8ebe-4d438a23e936</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_20</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_20-b02 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_20/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2010-05-09 01:43:40 GMT</timestamp><container>global</container><source>jdk-6u20-fcs-bin-b02-linux-amd64-12_apr_2010.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>"> <input type="submit" name="Submit"border="0" class="buttonblue" onmouseover="this.style.color='#fbe249';" onmouseout="this.style.color='#FFF';" value="Register My JDK"> </form></td> <td width="570"><span class="style3">You need to be connected to the Internet to register this Sun product. </span></td> diff --git a/extra/source/jdk-6/register_ja.html b/extra/source/jdk-6/register_ja.html index f98d2dff7..7030d6aca 100644 --- a/extra/source/jdk-6/register_ja.html +++ b/extra/source/jdk-6/register_ja.html @@ -20,12 +20,12 @@ a:visited,a:visited code{color:#917E9C} <table border="0" cellpadding="3" cellspacing="0" width="813"> <tbody><tr> <td height="78" width="7"> </td> - <td align="left" valign="top" width="794"><img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_15/jre/lib/servicetag/jdk_header.png" height="63" width="783"></td> + <td align="left" valign="top" width="794"><img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_20/jre/lib/servicetag/jdk_header.png" height="63" width="783"></td> </tr> <tr> <td> </td> - <td><p class="style1">Sun Microsystems ã®<strong> Java Development Kit Version 6 Update 15 </strong>をインストールã—ã¦ã„ãŸã ãã€ã‚ã‚ŠãŒã¨ã†ã”ã–ã„ã¾ã™ã€‚ </p> + <td><p class="style1">Sun Microsystems ã®<strong> Java Development Kit Version 6 Update 20 </strong>をインストールã—ã¦ã„ãŸã ãã€ã‚ã‚ŠãŒã¨ã†ã”ã–ã„ã¾ã™ã€‚ </p> <p class="style1">製å“登録をã™ã‚‹ã¨ã€æ¬¡ã®ã‚ˆã†ãªç‰¹å…¸ã‚’å—ã‘ã‚‹ã“ã¨ãŒã§ãã¾ã™ã€‚</p> <ul class="style1"> <li> 最新ã®ãƒãƒ¼ã‚¸ãƒ§ãƒ³ã€ãƒ‘ッãƒã€ãŠã‚ˆã³æ›´æ–°ã«ã¤ã„ã¦ã®é€šçŸ¥</li> @@ -37,8 +37,8 @@ a:visited,a:visited code{color:#917E9C} <p class="style1">å¿…è¦ã«ãªã‚‹ã®ã¯ã€Sun 開発者å‘ã‘ãƒãƒƒãƒˆãƒ¯ãƒ¼ã‚¯ã‚¢ã‚«ã‚¦ãƒ³ãƒˆã¾ãŸã¯ãã®ä»–ã® Sun オンラインアカウントã ã‘ã§ã™ã€‚ ã¾ã アカウントãŒãªã„å ´åˆã¯ã€ã‚¢ã‚«ã‚¦ãƒ³ãƒˆã®ä½œæˆãŒæ±‚ã‚られã¾ã™ã€‚ </p> <table width="708" border="0" cellspacing="0" cellpadding="3"> <tr valign="top"> - <td width="126" height="35"><form name="form1" method="post" action="https://inventory.sun.com/RegistrationWeb/register/urn:st:39938c22-57ad-43b4-8953-b7833a960447?product=jdk&locale=ja" enctype="text/xml"> - <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>00000000</hostId><osName>Linux</osName><osVersion>2.6.29.6</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>gigabyte technology co., ltd.</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>serial number</serialNumber></environment><registry urn=%22urn:st:39938c22-57ad-43b4-8953-b7833a960447%22 version=%221.0%22><service_tag><instance_urn>urn:st:771d40cb-57e3-4969-b32a-769e55e82934</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_15</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_15-b03 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_15/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2009-08-06 00:48:47 GMT</timestamp><container>global</container><source>jdk-6u15-fcs-bin-b03-linux-amd64-02_jul_2009.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>"> + <td width="126" height="35"><form name="form1" method="post" action="https://inventory.sun.com/RegistrationWeb/register/urn:st:b1330404-f0ee-4a41-a965-2f4bd7482e3b?product=jdk&locale=ja" enctype="text/xml"> + <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>a8c0265d</hostId><osName>Linux</osName><osVersion>2.6.33.3</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>emachines</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>ptnba0200193508e052700</serialNumber></environment><registry urn=%22urn:st:b1330404-f0ee-4a41-a965-2f4bd7482e3b%22 version=%221.0%22><service_tag><instance_urn>urn:st:4f6e7c38-ac6f-41da-8ebe-4d438a23e936</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_20</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_20-b02 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_20/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2010-05-09 01:43:40 GMT</timestamp><container>global</container><source>jdk-6u20-fcs-bin-b02-linux-amd64-12_apr_2010.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>"> <input type="submit" name="Submit"border="0" class="buttonblue" onmouseover="this.style.color='#fbe249';" onmouseout="this.style.color='#FFF';" value="JDK 製å“登録"> </form></td> <td width="570"><span class="style3">ã“ã® Sun 製å“を登録ã™ã‚‹ã«ã¯ã€ã‚¤ãƒ³ã‚¿ãƒ¼ãƒãƒƒãƒˆã«æŽ¥ç¶šã—ã¦ã„ã‚‹å¿…è¦ãŒã‚ã‚Šã¾ã™ã€‚ </span></td> diff --git a/extra/source/jdk-6/register_zh_CN.html b/extra/source/jdk-6/register_zh_CN.html index bc5fc2ae9..0656e82ed 100644 --- a/extra/source/jdk-6/register_zh_CN.html +++ b/extra/source/jdk-6/register_zh_CN.html @@ -19,13 +19,13 @@ a:visited,a:visited code{color:#917E9C} <table border="0" cellpadding="3" cellspacing="0" width="813"> <tbody><tr> <td height="78" width="7"> </td> - <td align="left" valign="top" width="794"><img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_15/jre/lib/servicetag/jdk_header.png" height="63" width="783"></td> + <td align="left" valign="top" width="794"><img src="file:/tmp/package-jdk/usr/lib64/jdk1.6.0_20/jre/lib/servicetag/jdk_header.png" height="63" width="783"></td> </tr> <tr> <td> </td> -<td><p class="style1">感谢您安装 Sun Microsystems çš„ <strong>Java Development Kit Version 6 Update 15</strong>。 </p> +<td><p class="style1">感谢您安装 Sun Microsystems çš„ <strong>Java Development Kit Version 6 Update 20</strong>。 </p> <p class="style1">注册产å“åŽæ‚¨å°†èŽ·å¾—如下增值æœåŠ¡ï¼š</p> <ul class="style1"> <li> 获得新版本ã€ä¿®è¡¥ç¨‹åºå’Œæ›´æ–°çš„通知æœåŠ¡</li> @@ -37,8 +37,8 @@ a:visited,a:visited code{color:#917E9C} <p class="style1">您需è¦å…·æœ‰ Sun å¼€å‘者网络或其他 Sun è”机å¸æˆ·ã€‚如果您没有,系统将æ示您创建一个。 </p> <table width="708" border="0" cellspacing="0" cellpadding="3"> <tr valign="top"> - <td width="126" height="35"><form name="form1" method="post" action="https://inventory.sun.com/RegistrationWeb/register/urn:st:39938c22-57ad-43b4-8953-b7833a960447?product=jdk&locale=zh_CN" enctype="text/xml"> - <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>00000000</hostId><osName>Linux</osName><osVersion>2.6.29.6</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>gigabyte technology co., ltd.</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>serial number</serialNumber></environment><registry urn=%22urn:st:39938c22-57ad-43b4-8953-b7833a960447%22 version=%221.0%22><service_tag><instance_urn>urn:st:771d40cb-57e3-4969-b32a-769e55e82934</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_15</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_15-b03 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_15/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2009-08-06 00:48:47 GMT</timestamp><container>global</container><source>jdk-6u15-fcs-bin-b03-linux-amd64-02_jul_2009.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>"> + <td width="126" height="35"><form name="form1" method="post" action="https://inventory.sun.com/RegistrationWeb/register/urn:st:b1330404-f0ee-4a41-a965-2f4bd7482e3b?product=jdk&locale=zh_CN" enctype="text/xml"> + <input type="hidden" name="servicetag_payload" value="<?xml version=%221.0%22 encoding=%22UTF-8%22 standalone=%22no%22?><registration_data version=%221.0%22><environment><hostname>midas64</hostname><hostId>a8c0265d</hostId><osName>Linux</osName><osVersion>2.6.33.3</osVersion><osArchitecture>amd64</osArchitecture><systemModel>AuthenticAMD</systemModel><systemManufacturer>emachines</systemManufacturer><cpuManufacturer>AuthenticAMD</cpuManufacturer><serialNumber>ptnba0200193508e052700</serialNumber></environment><registry urn=%22urn:st:b1330404-f0ee-4a41-a965-2f4bd7482e3b%22 version=%221.0%22><service_tag><instance_urn>urn:st:4f6e7c38-ac6f-41da-8ebe-4d438a23e936</instance_urn><product_name>Java SE 6 Development Kit</product_name><product_version>1.6.0_20</product_version><product_urn>urn:uuid:b58ef9a8-5ae8-11db-a023-080020a9ed93</product_urn><product_parent_urn>urn:uuid:fdc90b21-018d-4cab-b866-612c7c119ed3</product_parent_urn><product_parent>Java Platform Standard Edition 6 (Java SE 6)</product_parent><product_defined_inst_id>id=1.6.0_20-b02 amd64,dir=/tmp/package-jdk/usr/lib64/jdk1.6.0_20/jre</product_defined_inst_id><product_vendor>Sun Microsystems</product_vendor><platform_arch>amd64</platform_arch><timestamp>2010-05-09 01:43:40 GMT</timestamp><container>global</container><source>jdk-6u20-fcs-bin-b02-linux-amd64-12_apr_2010.bin</source><installer_uid>-1</installer_uid></service_tag></registry></registration_data>"> <input type="submit" name="Submit"border="0" class="buttonblue" onmouseover="this.style.color='#fbe249';" onmouseout="this.style.color='#FFF';" value="注册我的 JDK"> </form></td> <td width="570"><span class="style3">您需è¦è¿žæŽ¥åˆ° Internet æ¥æ³¨å†Œæ¤ Sun 产å“。 </span></td> diff --git a/extra/source/jdk-6/slack-desc b/extra/source/jdk-6/slack-desc index 5e21d1707..9dafa417c 100644 --- a/extra/source/jdk-6/slack-desc +++ b/extra/source/jdk-6/slack-desc @@ -5,7 +5,7 @@ # exactly 11 lines for the formatting to be correct. It's also customary to # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -jdk: Java(TM) 2 Platform Standard Edition Development Kit 6.0 update 16. +jdk: Java(TM) 2 Platform Standard Edition Development Kit 6.0 update 20. jdk: jdk: The Java 2 SDK software includes tools for developing, testing, and jdk: running programs written in the Java programming language. This diff --git a/extra/source/partitionmanager/partitionmanager.SlackBuild b/extra/source/partitionmanager/partitionmanager.SlackBuild index cf91510f1..371ef22ff 100755 --- a/extra/source/partitionmanager/partitionmanager.SlackBuild +++ b/extra/source/partitionmanager/partitionmanager.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.0.0-BETA1 -ARCH=${ARCH:-x86_64} +VERSION=1.0.2 BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) @@ -38,18 +48,23 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf partitionmanager-$VERSION -tar xvf $CWD/partitionmanager-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/partitionmanager-$VERSION.tar.?z* || exit 1 cd partitionmanager-$VERSION || exit 1 -# All the rest of KDE uses 'en' not 'en_US' as a documentation language: -mv doc/{en_US,en} || exit 1 -sed -i -e 's/en_US/en/' doc/CMakeLists.txt -sed -i -e 's/en_US/en/' doc/en/CMakeLists.txt + +## All the rest of KDE uses 'en' not 'en_US' as a documentation language: +#mv doc/{en_US,en} || exit 1 +#sed -i -e 's/en_US/en/' doc/CMakeLists.txt +#sed -i -e 's/en_US/en/' doc/en/CMakeLists.txt + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/extra/source/recordmydesktop/slack-desc b/extra/source/recordmydesktop/slack-desc index facfd02b9..68091c86f 100644 --- a/extra/source/recordmydesktop/slack-desc +++ b/extra/source/recordmydesktop/slack-desc @@ -9,11 +9,11 @@ recordmydesktop: recordmydesktop (record desktop sessions with audio and video) recordmydesktop: recordmydesktop: recordMyDesktop is a desktop session recorder for GNU/Linux -recordmydesktop: that attemps to be easy to use, yet also effective at it's +recordmydesktop: that attempts to be easy to use, yet also effective at its recordmydesktop: primary task. recordmydesktop: The command-line program (the backend) and the graphical recordmydesktop: interface (the frontend) are separate programs, but all the recordmydesktop: functionality relies on the backend which is also a standalone -recordmydesktop: program. The frontend can't function on it's own. +recordmydesktop: program. The frontend can't function on its own. recordmydesktop: recordmydesktop: recordmydesktop home: http://recordmydesktop.sourceforge.net/ diff --git a/extra/source/slacktrack/slacktrack.SlackBuild b/extra/source/slacktrack/slacktrack.SlackBuild index abefb3be2..ca2bd0932 100755 --- a/extra/source/slacktrack/slacktrack.SlackBuild +++ b/extra/source/slacktrack/slacktrack.SlackBuild @@ -5,8 +5,7 @@ if [ "$TMP" = "" ]; then TMP=/tmp fi -export VERSION=2.06 -export ARCH=${ARCH:-x86_64} +export VERSION=2.07 export PKGEXT=${PKGEXT:-txz} if [ ! -d $TMP ]; then diff --git a/extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff b/extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff new file mode 100644 index 000000000..d479b29c6 --- /dev/null +++ b/extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff @@ -0,0 +1,23 @@ +revno: 554 +committer: Andrew Psaltis <ampsaltis@gmail.com> +branch nick: 1.6 +timestamp: Mon 2010-03-29 13:19:08 -0400 +message: + Fixed typo in EAP-fast template, re-resolving bug 261804. + +=== modified file 'encryption/templates/eap' +--- encryption/templates/eap 2009-03-01 02:52:27 +0000 ++++ encryption/templates/eap 2010-03-29 17:19:08 +0000 +@@ -11,10 +11,10 @@ + proto=RSN WPA + pairwise=CCMP TKIP + group=CCMP TKIP +- key-mgmt=WPA-EAP ++ key_mgmt=WPA-EAP + eap=FAST + identity="$_USERNAME" + password="$_PASSWORD" + phase1="fast_provisioning=1" +- pac-file="$_PAC_FILE" ++ pac_file="$_PAC_FILE" + } diff --git a/extra/source/wicd/wicd-1.7.0-fix_script_bug.diff b/extra/source/wicd/wicd-1.7.0-fix_script_bug.diff new file mode 100644 index 000000000..dc3ace60e --- /dev/null +++ b/extra/source/wicd/wicd-1.7.0-fix_script_bug.diff @@ -0,0 +1,30 @@ +revno: 553 +committer: Andrew Psaltis <ampsaltis@gmail.com> +branch nick: 1.6 +timestamp: Wed 2010-01-27 14:06:21 -0500 +message: + Fixed bug in script macro expansion. + +=== modified file 'wicd/networking.py' +--- wicd/networking.py 2010-01-15 04:02:10 +0000 ++++ wicd/networking.py 2010-01-27 19:06:21 +0000 +@@ -215,8 +215,8 @@ + if self.pre_disconnect_script: + print 'Running pre-disconnect script' + misc.ExecuteScript(expand_script_macros(self.pre_disconnect_script, +- 'pre-disconnection', (mac, +- name)), ++ 'pre-disconnection', ++ mac, name), + self.debug) + iface.ReleaseDHCP() + iface.SetAddress('0.0.0.0') +@@ -229,7 +229,7 @@ + print 'Running post-disconnect script' + misc.ExecuteScript(expand_script_macros(self.post_disconnect_script, + 'post-disconnection', +- (mac, name)), ++ mac, name), + self.debug) + + def ReleaseDHCP(self): diff --git a/extra/source/wicd/wicd.SlackBuild b/extra/source/wicd/wicd.SlackBuild index 21d6d454c..20dcd393c 100755 --- a/extra/source/wicd/wicd.SlackBuild +++ b/extra/source/wicd/wicd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008,2009 Robby Workman Northport, AL, USA +# Copyright 2008-2010 Robby Workman Northport, AL, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,17 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=wicd -VERSION=${VERSION:-1.6.2.1} -ARCH=${ARCH:-x86_64} # This should be the same as the python package -BUILD=${BUILD:-1} +VERSION=${VERSION:-1.7.0} +BUILD=${BUILD:-2} + +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -35,6 +43,8 @@ elif [ "$ARCH" = "s390" ]; then LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" +else + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -45,11 +55,14 @@ tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 cd $PRGNAM-$VERSION || exit 1 chown -R root:root . +# Fix a couple of bugs that are addressed in the upstream bzr repo +zcat $CWD/wicd-1.7.0-fix_EAP_fast_typo.diff.gz | patch -p0 --verbose || exit 1 +zcat $CWD/wicd-1.7.0-fix_script_bug.diff.gz | patch -p0 --verbose || exit 1 + python setup.py configure \ --lib=/usr/lib${LIBDIRSUFFIX}/wicd \ --kdedir=/usr/share/autostart \ --backends=/usr/lib${LIBDIRSUFFIX}/wicd/backends \ - --wicdgroup=netdev \ || exit 1 python setup.py install --root=$PKG || exit 1 diff --git a/isolinux/isolinux.boot b/isolinux/isolinux.boot Binary files differindex 97f9401ec..bcc923aec 100644 --- a/isolinux/isolinux.boot +++ b/isolinux/isolinux.boot diff --git a/isolinux/message.txt b/isolinux/message.txt index a28cd3a23..365bddfef 100644 --- a/isolinux/message.txt +++ b/isolinux/message.txt @@ -1,14 +1,14 @@ -Welcome to 09Slackware6407 version 13.0 (Linux kernel 2.6.29.6)! +Welcome to 09Slackware6407 version 13.1 (Linux kernel 2.6.33.4)! If you need to pass extra parameters to the kernel, enter them at the prompt below after the name of the kernel to boot (huge.s etc). In a pinch, you can boot your system from here with a command like: -boot: huge.s root=/dev/hda1 rdinit= ro +boot: huge.s root=/dev/sda1 rdinit= ro -In the example above, /dev/hda1 is the / Linux partition. +In the example above, /dev/sda1 is the / Linux partition. This prompt is just for entering extra parameters. If you don't need to enter any parameters, hit ENTER to boot the default kernel "huge.s" or press [F2] diff --git a/kernels/VERSIONS.TXT b/kernels/VERSIONS.TXT index 51c5412e7..e328d23a0 100644 --- a/kernels/VERSIONS.TXT +++ b/kernels/VERSIONS.TXT @@ -1,3 +1,3 @@ -These kernels are version 2.6.29.6.
+These kernels are version 2.6.33.4.
diff --git a/slackbook/html/TRADEMARKS.html b/misc/slackbook/html/TRADEMARKS.html index 0f282ca46..0f282ca46 100644 --- a/slackbook/html/TRADEMARKS.html +++ b/misc/slackbook/html/TRADEMARKS.html diff --git a/slackbook/html/archive-files-bzip2.html b/misc/slackbook/html/archive-files-bzip2.html index ea3a4e044..ea3a4e044 100644 --- a/slackbook/html/archive-files-bzip2.html +++ b/misc/slackbook/html/archive-files-bzip2.html diff --git a/slackbook/html/archive-files-tar.html b/misc/slackbook/html/archive-files-tar.html index b23db4b12..b23db4b12 100644 --- a/slackbook/html/archive-files-tar.html +++ b/misc/slackbook/html/archive-files-tar.html diff --git a/slackbook/html/archive-files-zip.html b/misc/slackbook/html/archive-files-zip.html index cf7ef6cdd..cf7ef6cdd 100644 --- a/slackbook/html/archive-files-zip.html +++ b/misc/slackbook/html/archive-files-zip.html diff --git a/slackbook/html/archive-files.html b/misc/slackbook/html/archive-files.html index c29542a95..c29542a95 100644 --- a/slackbook/html/archive-files.html +++ b/misc/slackbook/html/archive-files.html diff --git a/slackbook/html/basic-network-commands-dns.html b/misc/slackbook/html/basic-network-commands-dns.html index f8881aad2..f8881aad2 100644 --- a/slackbook/html/basic-network-commands-dns.html +++ b/misc/slackbook/html/basic-network-commands-dns.html diff --git a/slackbook/html/basic-network-commands-email.html b/misc/slackbook/html/basic-network-commands-email.html index 487ea4bc4..487ea4bc4 100644 --- a/slackbook/html/basic-network-commands-email.html +++ b/misc/slackbook/html/basic-network-commands-email.html diff --git a/slackbook/html/basic-network-commands-finger.html b/misc/slackbook/html/basic-network-commands-finger.html index 08eca57c6..08eca57c6 100644 --- a/slackbook/html/basic-network-commands-finger.html +++ b/misc/slackbook/html/basic-network-commands-finger.html diff --git a/slackbook/html/basic-network-commands-ftp.html b/misc/slackbook/html/basic-network-commands-ftp.html index a5b48f073..a5b48f073 100644 --- a/slackbook/html/basic-network-commands-ftp.html +++ b/misc/slackbook/html/basic-network-commands-ftp.html diff --git a/slackbook/html/basic-network-commands-ssh.html b/misc/slackbook/html/basic-network-commands-ssh.html index f9912fe1e..f9912fe1e 100644 --- a/slackbook/html/basic-network-commands-ssh.html +++ b/misc/slackbook/html/basic-network-commands-ssh.html diff --git a/slackbook/html/basic-network-commands-talk.html b/misc/slackbook/html/basic-network-commands-talk.html index 5c61119e3..5c61119e3 100644 --- a/slackbook/html/basic-network-commands-talk.html +++ b/misc/slackbook/html/basic-network-commands-talk.html diff --git a/slackbook/html/basic-network-commands-telnet.html b/misc/slackbook/html/basic-network-commands-telnet.html index 736a26486..736a26486 100644 --- a/slackbook/html/basic-network-commands-telnet.html +++ b/misc/slackbook/html/basic-network-commands-telnet.html diff --git a/slackbook/html/basic-network-commands-traceroute.html b/misc/slackbook/html/basic-network-commands-traceroute.html index fead8c007..fead8c007 100644 --- a/slackbook/html/basic-network-commands-traceroute.html +++ b/misc/slackbook/html/basic-network-commands-traceroute.html diff --git a/slackbook/html/basic-network-commands-web.html b/misc/slackbook/html/basic-network-commands-web.html index e3f3b6c5f..e3f3b6c5f 100644 --- a/slackbook/html/basic-network-commands-web.html +++ b/misc/slackbook/html/basic-network-commands-web.html diff --git a/slackbook/html/basic-network-commands.html b/misc/slackbook/html/basic-network-commands.html index 7ee787511..7ee787511 100644 --- a/slackbook/html/basic-network-commands.html +++ b/misc/slackbook/html/basic-network-commands.html diff --git a/slackbook/html/basic-network-commands/elm.png b/misc/slackbook/html/basic-network-commands/elm.png Binary files differindex 3607bb641..3607bb641 100644 --- a/slackbook/html/basic-network-commands/elm.png +++ b/misc/slackbook/html/basic-network-commands/elm.png diff --git a/slackbook/html/basic-network-commands/links.png b/misc/slackbook/html/basic-network-commands/links.png Binary files differindex f5b8275a7..f5b8275a7 100644 --- a/slackbook/html/basic-network-commands/links.png +++ b/misc/slackbook/html/basic-network-commands/links.png diff --git a/slackbook/html/basic-network-commands/lynx.png b/misc/slackbook/html/basic-network-commands/lynx.png Binary files differindex 52d0a0c3a..52d0a0c3a 100644 --- a/slackbook/html/basic-network-commands/lynx.png +++ b/misc/slackbook/html/basic-network-commands/lynx.png diff --git a/slackbook/html/basic-network-commands/mutt.png b/misc/slackbook/html/basic-network-commands/mutt.png Binary files differindex d67675ab0..d67675ab0 100644 --- a/slackbook/html/basic-network-commands/mutt.png +++ b/misc/slackbook/html/basic-network-commands/mutt.png diff --git a/slackbook/html/basic-network-commands/pine.png b/misc/slackbook/html/basic-network-commands/pine.png Binary files differindex 3257d14e8..3257d14e8 100644 --- a/slackbook/html/basic-network-commands/pine.png +++ b/misc/slackbook/html/basic-network-commands/pine.png diff --git a/slackbook/html/basic-network-commands/talk.png b/misc/slackbook/html/basic-network-commands/talk.png Binary files differindex 408ab1184..408ab1184 100644 --- a/slackbook/html/basic-network-commands/talk.png +++ b/misc/slackbook/html/basic-network-commands/talk.png diff --git a/slackbook/html/basic-network-commands/ytalk.png b/misc/slackbook/html/basic-network-commands/ytalk.png Binary files differindex f5f2f9c77..f5f2f9c77 100644 --- a/slackbook/html/basic-network-commands/ytalk.png +++ b/misc/slackbook/html/basic-network-commands/ytalk.png diff --git a/slackbook/html/book-preface.html b/misc/slackbook/html/book-preface.html index 9507434dc..9507434dc 100644 --- a/slackbook/html/book-preface.html +++ b/misc/slackbook/html/book-preface.html diff --git a/slackbook/html/book.html b/misc/slackbook/html/book.html index c0803a78e..c0803a78e 100644 --- a/slackbook/html/book.html +++ b/misc/slackbook/html/book.html diff --git a/slackbook/html/booting-dual.html b/misc/slackbook/html/booting-dual.html index b74eb874b..b74eb874b 100644 --- a/slackbook/html/booting-dual.html +++ b/misc/slackbook/html/booting-dual.html diff --git a/slackbook/html/booting-loadlin.html b/misc/slackbook/html/booting-loadlin.html index d11754d34..d11754d34 100644 --- a/slackbook/html/booting-loadlin.html +++ b/misc/slackbook/html/booting-loadlin.html diff --git a/slackbook/html/booting.html b/misc/slackbook/html/booting.html index ca3b7871f..ca3b7871f 100644 --- a/slackbook/html/booting.html +++ b/misc/slackbook/html/booting.html diff --git a/slackbook/html/booting/setup-lilo-expert-w.png b/misc/slackbook/html/booting/setup-lilo-expert-w.png Binary files differindex 9c029d78f..9c029d78f 100644 --- a/slackbook/html/booting/setup-lilo-expert-w.png +++ b/misc/slackbook/html/booting/setup-lilo-expert-w.png diff --git a/slackbook/html/booting/setup-lilo-w.png b/misc/slackbook/html/booting/setup-lilo-w.png Binary files differindex 638a29ff1..638a29ff1 100644 --- a/slackbook/html/booting/setup-lilo-w.png +++ b/misc/slackbook/html/booting/setup-lilo-w.png diff --git a/slackbook/html/docbook.css b/misc/slackbook/html/docbook.css index 7d7cf7949..7d7cf7949 100644 --- a/slackbook/html/docbook.css +++ b/misc/slackbook/html/docbook.css diff --git a/slackbook/html/emacs-basic-editing.html b/misc/slackbook/html/emacs-basic-editing.html index fbc5072b4..fbc5072b4 100644 --- a/slackbook/html/emacs-basic-editing.html +++ b/misc/slackbook/html/emacs-basic-editing.html diff --git a/slackbook/html/emacs-buffers.html b/misc/slackbook/html/emacs-buffers.html index 53516de81..53516de81 100644 --- a/slackbook/html/emacs-buffers.html +++ b/misc/slackbook/html/emacs-buffers.html diff --git a/slackbook/html/emacs-modes.html b/misc/slackbook/html/emacs-modes.html index ed22a3543..ed22a3543 100644 --- a/slackbook/html/emacs-modes.html +++ b/misc/slackbook/html/emacs-modes.html diff --git a/slackbook/html/emacs-saving-files.html b/misc/slackbook/html/emacs-saving-files.html index 7e2ee9e19..7e2ee9e19 100644 --- a/slackbook/html/emacs-saving-files.html +++ b/misc/slackbook/html/emacs-saving-files.html diff --git a/slackbook/html/emacs.html b/misc/slackbook/html/emacs.html index 8c6479cd1..8c6479cd1 100644 --- a/slackbook/html/emacs.html +++ b/misc/slackbook/html/emacs.html diff --git a/slackbook/html/emacs/emacs.png b/misc/slackbook/html/emacs/emacs.png Binary files differindex 7571dec42..7571dec42 100644 --- a/slackbook/html/emacs/emacs.png +++ b/misc/slackbook/html/emacs/emacs.png diff --git a/slackbook/html/essential-sysadmin-hardusers.html b/misc/slackbook/html/essential-sysadmin-hardusers.html index f9ad54488..f9ad54488 100644 --- a/slackbook/html/essential-sysadmin-hardusers.html +++ b/misc/slackbook/html/essential-sysadmin-hardusers.html diff --git a/slackbook/html/essential-sysadmin-shutdown.html b/misc/slackbook/html/essential-sysadmin-shutdown.html index a97c78f6d..a97c78f6d 100644 --- a/slackbook/html/essential-sysadmin-shutdown.html +++ b/misc/slackbook/html/essential-sysadmin-shutdown.html diff --git a/slackbook/html/essential-sysadmin.html b/misc/slackbook/html/essential-sysadmin.html index 85e127ed1..85e127ed1 100644 --- a/slackbook/html/essential-sysadmin.html +++ b/misc/slackbook/html/essential-sysadmin.html diff --git a/slackbook/html/file-commands-copymove.html b/misc/slackbook/html/file-commands-copymove.html index ddb7179a9..ddb7179a9 100644 --- a/slackbook/html/file-commands-copymove.html +++ b/misc/slackbook/html/file-commands-copymove.html diff --git a/slackbook/html/file-commands-creation.html b/misc/slackbook/html/file-commands-creation.html index cfbf72050..cfbf72050 100644 --- a/slackbook/html/file-commands-creation.html +++ b/misc/slackbook/html/file-commands-creation.html diff --git a/slackbook/html/file-commands-deletion.html b/misc/slackbook/html/file-commands-deletion.html index 5b4277c66..5b4277c66 100644 --- a/slackbook/html/file-commands-deletion.html +++ b/misc/slackbook/html/file-commands-deletion.html diff --git a/slackbook/html/file-commands-link.html b/misc/slackbook/html/file-commands-link.html index 8a3784fa7..8a3784fa7 100644 --- a/slackbook/html/file-commands-link.html +++ b/misc/slackbook/html/file-commands-link.html diff --git a/slackbook/html/file-commands-output.html b/misc/slackbook/html/file-commands-output.html index e2419b276..e2419b276 100644 --- a/slackbook/html/file-commands-output.html +++ b/misc/slackbook/html/file-commands-output.html diff --git a/slackbook/html/file-commands-pagers.html b/misc/slackbook/html/file-commands-pagers.html index 731c464b4..731c464b4 100644 --- a/slackbook/html/file-commands-pagers.html +++ b/misc/slackbook/html/file-commands-pagers.html diff --git a/slackbook/html/file-commands.html b/misc/slackbook/html/file-commands.html index b541735d7..b541735d7 100644 --- a/slackbook/html/file-commands.html +++ b/misc/slackbook/html/file-commands.html diff --git a/slackbook/html/filesystem-structure-links.html b/misc/slackbook/html/filesystem-structure-links.html index 451270e5e..451270e5e 100644 --- a/slackbook/html/filesystem-structure-links.html +++ b/misc/slackbook/html/filesystem-structure-links.html diff --git a/slackbook/html/filesystem-structure-mounting.html b/misc/slackbook/html/filesystem-structure-mounting.html index e09694e40..e09694e40 100644 --- a/slackbook/html/filesystem-structure-mounting.html +++ b/misc/slackbook/html/filesystem-structure-mounting.html diff --git a/slackbook/html/filesystem-structure-nfs.html b/misc/slackbook/html/filesystem-structure-nfs.html index 720cda6e6..720cda6e6 100644 --- a/slackbook/html/filesystem-structure-nfs.html +++ b/misc/slackbook/html/filesystem-structure-nfs.html diff --git a/slackbook/html/filesystem-structure-permissions.html b/misc/slackbook/html/filesystem-structure-permissions.html index 0f951e777..0f951e777 100644 --- a/slackbook/html/filesystem-structure-permissions.html +++ b/misc/slackbook/html/filesystem-structure-permissions.html diff --git a/slackbook/html/filesystem-structure.html b/misc/slackbook/html/filesystem-structure.html index 843c07c5d..843c07c5d 100644 --- a/slackbook/html/filesystem-structure.html +++ b/misc/slackbook/html/filesystem-structure.html diff --git a/slackbook/html/glossary.html b/misc/slackbook/html/glossary.html index efdb63236..efdb63236 100644 --- a/slackbook/html/glossary.html +++ b/misc/slackbook/html/glossary.html diff --git a/slackbook/html/gpl.html b/misc/slackbook/html/gpl.html index 7e41435cc..7e41435cc 100644 --- a/slackbook/html/gpl.html +++ b/misc/slackbook/html/gpl.html diff --git a/slackbook/html/help-online.html b/misc/slackbook/html/help-online.html index fdd253881..fdd253881 100644 --- a/slackbook/html/help-online.html +++ b/misc/slackbook/html/help-online.html diff --git a/slackbook/html/help.html b/misc/slackbook/html/help.html index 691282f6e..691282f6e 100644 --- a/slackbook/html/help.html +++ b/misc/slackbook/html/help.html diff --git a/slackbook/html/imagelib/admon/note.png b/misc/slackbook/html/imagelib/admon/note.png Binary files differindex b0ee5555b..b0ee5555b 100644 --- a/slackbook/html/imagelib/admon/note.png +++ b/misc/slackbook/html/imagelib/admon/note.png diff --git a/slackbook/html/imagelib/admon/warning.png b/misc/slackbook/html/imagelib/admon/warning.png Binary files differindex bc0adf33f..bc0adf33f 100644 --- a/slackbook/html/imagelib/admon/warning.png +++ b/misc/slackbook/html/imagelib/admon/warning.png diff --git a/slackbook/html/index.html b/misc/slackbook/html/index.html index dc63844e5..dc63844e5 100644 --- a/slackbook/html/index.html +++ b/misc/slackbook/html/index.html diff --git a/slackbook/html/installation-partitioning.html b/misc/slackbook/html/installation-partitioning.html index 3d3821e5e..3d3821e5e 100644 --- a/slackbook/html/installation-partitioning.html +++ b/misc/slackbook/html/installation-partitioning.html diff --git a/slackbook/html/installation-requirements.html b/misc/slackbook/html/installation-requirements.html index e0e53dbf5..e0e53dbf5 100644 --- a/slackbook/html/installation-requirements.html +++ b/misc/slackbook/html/installation-requirements.html diff --git a/slackbook/html/installation-setup.html b/misc/slackbook/html/installation-setup.html index 68b06ce10..68b06ce10 100644 --- a/slackbook/html/installation-setup.html +++ b/misc/slackbook/html/installation-setup.html diff --git a/slackbook/html/installation.html b/misc/slackbook/html/installation.html index c2d1140e2..c2d1140e2 100644 --- a/slackbook/html/installation.html +++ b/misc/slackbook/html/installation.html diff --git a/slackbook/html/installation/setup-bootdisk-w.png b/misc/slackbook/html/installation/setup-bootdisk-w.png Binary files differindex 55eb7b2a3..55eb7b2a3 100644 --- a/slackbook/html/installation/setup-bootdisk-w.png +++ b/misc/slackbook/html/installation/setup-bootdisk-w.png diff --git a/slackbook/html/installation/setup-font-w.png b/misc/slackbook/html/installation/setup-font-w.png Binary files differindex c18769669..c18769669 100644 --- a/slackbook/html/installation/setup-font-w.png +++ b/misc/slackbook/html/installation/setup-font-w.png diff --git a/slackbook/html/installation/setup-hardware-clock-w.png b/misc/slackbook/html/installation/setup-hardware-clock-w.png Binary files differindex 784975dac..784975dac 100644 --- a/slackbook/html/installation/setup-hardware-clock-w.png +++ b/misc/slackbook/html/installation/setup-hardware-clock-w.png diff --git a/slackbook/html/installation/setup-help-w.png b/misc/slackbook/html/installation/setup-help-w.png Binary files differindex 21958005e..21958005e 100644 --- a/slackbook/html/installation/setup-help-w.png +++ b/misc/slackbook/html/installation/setup-help-w.png diff --git a/slackbook/html/installation/setup-install-w.png b/misc/slackbook/html/installation/setup-install-w.png Binary files differindex 7ca526989..7ca526989 100644 --- a/slackbook/html/installation/setup-install-w.png +++ b/misc/slackbook/html/installation/setup-install-w.png diff --git a/slackbook/html/installation/setup-kernel-w.png b/misc/slackbook/html/installation/setup-kernel-w.png Binary files differindex 206c3d760..206c3d760 100644 --- a/slackbook/html/installation/setup-kernel-w.png +++ b/misc/slackbook/html/installation/setup-kernel-w.png diff --git a/slackbook/html/installation/setup-keymap-w.png b/misc/slackbook/html/installation/setup-keymap-w.png Binary files differindex ab7dd6f45..ab7dd6f45 100644 --- a/slackbook/html/installation/setup-keymap-w.png +++ b/misc/slackbook/html/installation/setup-keymap-w.png diff --git a/slackbook/html/installation/setup-lilo-w.png b/misc/slackbook/html/installation/setup-lilo-w.png Binary files differindex 638a29ff1..638a29ff1 100644 --- a/slackbook/html/installation/setup-lilo-w.png +++ b/misc/slackbook/html/installation/setup-lilo-w.png diff --git a/slackbook/html/installation/setup-modem-w.png b/misc/slackbook/html/installation/setup-modem-w.png Binary files differindex e1c8877e9..e1c8877e9 100644 --- a/slackbook/html/installation/setup-modem-w.png +++ b/misc/slackbook/html/installation/setup-modem-w.png diff --git a/slackbook/html/installation/setup-mouse-w.png b/misc/slackbook/html/installation/setup-mouse-w.png Binary files differindex 31ee6b35b..31ee6b35b 100644 --- a/slackbook/html/installation/setup-mouse-w.png +++ b/misc/slackbook/html/installation/setup-mouse-w.png diff --git a/slackbook/html/installation/setup-program-w.png b/misc/slackbook/html/installation/setup-program-w.png Binary files differindex 721ed0587..721ed0587 100644 --- a/slackbook/html/installation/setup-program-w.png +++ b/misc/slackbook/html/installation/setup-program-w.png diff --git a/slackbook/html/installation/setup-select-w.png b/misc/slackbook/html/installation/setup-select-w.png Binary files differindex d2f7a1442..d2f7a1442 100644 --- a/slackbook/html/installation/setup-select-w.png +++ b/misc/slackbook/html/installation/setup-select-w.png diff --git a/slackbook/html/installation/setup-source-w.png b/misc/slackbook/html/installation/setup-source-w.png Binary files differindex 226ef5b60..226ef5b60 100644 --- a/slackbook/html/installation/setup-source-w.png +++ b/misc/slackbook/html/installation/setup-source-w.png diff --git a/slackbook/html/installation/setup-swap-w.png b/misc/slackbook/html/installation/setup-swap-w.png Binary files differindex f17ba4f3c..f17ba4f3c 100644 --- a/slackbook/html/installation/setup-swap-w.png +++ b/misc/slackbook/html/installation/setup-swap-w.png diff --git a/slackbook/html/installation/setup-target-w.png b/misc/slackbook/html/installation/setup-target-w.png Binary files differindex 142cf8bce..142cf8bce 100644 --- a/slackbook/html/installation/setup-target-w.png +++ b/misc/slackbook/html/installation/setup-target-w.png diff --git a/slackbook/html/installation/setup-timezone-w.png b/misc/slackbook/html/installation/setup-timezone-w.png Binary files differindex b51500b85..b51500b85 100644 --- a/slackbook/html/installation/setup-timezone-w.png +++ b/misc/slackbook/html/installation/setup-timezone-w.png diff --git a/slackbook/html/installation/setup-xwmconfig-w.png b/misc/slackbook/html/installation/setup-xwmconfig-w.png Binary files differindex 91c8cc015..91c8cc015 100644 --- a/slackbook/html/installation/setup-xwmconfig-w.png +++ b/misc/slackbook/html/installation/setup-xwmconfig-w.png diff --git a/slackbook/html/introduction-opensource.html b/misc/slackbook/html/introduction-opensource.html index eeeda9e57..eeeda9e57 100644 --- a/slackbook/html/introduction-opensource.html +++ b/misc/slackbook/html/introduction-opensource.html diff --git a/slackbook/html/introduction-slackware.html b/misc/slackbook/html/introduction-slackware.html index c9c7a11a8..c9c7a11a8 100644 --- a/slackbook/html/introduction-slackware.html +++ b/misc/slackbook/html/introduction-slackware.html diff --git a/slackbook/html/introduction.html b/misc/slackbook/html/introduction.html index 70bc42162..70bc42162 100644 --- a/slackbook/html/introduction.html +++ b/misc/slackbook/html/introduction.html diff --git a/slackbook/html/network-configuration-hardware.html b/misc/slackbook/html/network-configuration-hardware.html index 99c2f2833..99c2f2833 100644 --- a/slackbook/html/network-configuration-hardware.html +++ b/misc/slackbook/html/network-configuration-hardware.html diff --git a/slackbook/html/network-configuration-nfs.html b/misc/slackbook/html/network-configuration-nfs.html index ca6138d8d..ca6138d8d 100644 --- a/slackbook/html/network-configuration-nfs.html +++ b/misc/slackbook/html/network-configuration-nfs.html diff --git a/slackbook/html/network-configuration-ppp.html b/misc/slackbook/html/network-configuration-ppp.html index 06dd7203f..06dd7203f 100644 --- a/slackbook/html/network-configuration-ppp.html +++ b/misc/slackbook/html/network-configuration-ppp.html diff --git a/slackbook/html/network-configuration-tcpip.html b/misc/slackbook/html/network-configuration-tcpip.html index 3b49437ef..3b49437ef 100644 --- a/slackbook/html/network-configuration-tcpip.html +++ b/misc/slackbook/html/network-configuration-tcpip.html diff --git a/slackbook/html/network-configuration-wireless.html b/misc/slackbook/html/network-configuration-wireless.html index fa86dcc26..fa86dcc26 100644 --- a/slackbook/html/network-configuration-wireless.html +++ b/misc/slackbook/html/network-configuration-wireless.html diff --git a/slackbook/html/network-configuration.html b/misc/slackbook/html/network-configuration.html index 66fb00829..66fb00829 100644 --- a/slackbook/html/network-configuration.html +++ b/misc/slackbook/html/network-configuration.html diff --git a/slackbook/html/package-management-making-packages.html b/misc/slackbook/html/package-management-making-packages.html index f58127753..f58127753 100644 --- a/slackbook/html/package-management-making-packages.html +++ b/misc/slackbook/html/package-management-making-packages.html diff --git a/slackbook/html/package-management-making-tags-and-tagfiles.html b/misc/slackbook/html/package-management-making-tags-and-tagfiles.html index 9c82bdf08..9c82bdf08 100644 --- a/slackbook/html/package-management-making-tags-and-tagfiles.html +++ b/misc/slackbook/html/package-management-making-tags-and-tagfiles.html diff --git a/slackbook/html/package-management-package-utilities.html b/misc/slackbook/html/package-management-package-utilities.html index 0179a5a81..0179a5a81 100644 --- a/slackbook/html/package-management-package-utilities.html +++ b/misc/slackbook/html/package-management-package-utilities.html diff --git a/slackbook/html/package-management.html b/misc/slackbook/html/package-management.html index e6ddc32b9..e6ddc32b9 100644 --- a/slackbook/html/package-management.html +++ b/misc/slackbook/html/package-management.html diff --git a/slackbook/html/package-management/pkgtool-view-w.png b/misc/slackbook/html/package-management/pkgtool-view-w.png Binary files differindex 7a62a8bc5..7a62a8bc5 100644 --- a/slackbook/html/package-management/pkgtool-view-w.png +++ b/misc/slackbook/html/package-management/pkgtool-view-w.png diff --git a/slackbook/html/package-management/pkgtool-w.png b/misc/slackbook/html/package-management/pkgtool-w.png Binary files differindex 1a43423f6..1a43423f6 100644 --- a/slackbook/html/package-management/pkgtool-w.png +++ b/misc/slackbook/html/package-management/pkgtool-w.png diff --git a/slackbook/html/process-control-foregrounding.html b/misc/slackbook/html/process-control-foregrounding.html index 7b185ba74..7b185ba74 100644 --- a/slackbook/html/process-control-foregrounding.html +++ b/misc/slackbook/html/process-control-foregrounding.html diff --git a/slackbook/html/process-control-kill.html b/misc/slackbook/html/process-control-kill.html index 322926512..322926512 100644 --- a/slackbook/html/process-control-kill.html +++ b/misc/slackbook/html/process-control-kill.html diff --git a/slackbook/html/process-control-ps.html b/misc/slackbook/html/process-control-ps.html index 27b842686..27b842686 100644 --- a/slackbook/html/process-control-ps.html +++ b/misc/slackbook/html/process-control-ps.html diff --git a/slackbook/html/process-control-top.html b/misc/slackbook/html/process-control-top.html index c15f0f4ee..c15f0f4ee 100644 --- a/slackbook/html/process-control-top.html +++ b/misc/slackbook/html/process-control-top.html diff --git a/slackbook/html/process-control.html b/misc/slackbook/html/process-control.html index 8727262d2..8727262d2 100644 --- a/slackbook/html/process-control.html +++ b/misc/slackbook/html/process-control.html diff --git a/slackbook/html/security-current.html b/misc/slackbook/html/security-current.html index 12e207167..12e207167 100644 --- a/slackbook/html/security-current.html +++ b/misc/slackbook/html/security-current.html diff --git a/slackbook/html/security-host.html b/misc/slackbook/html/security-host.html index 55f33286a..55f33286a 100644 --- a/slackbook/html/security-host.html +++ b/misc/slackbook/html/security-host.html diff --git a/slackbook/html/security.html b/misc/slackbook/html/security.html index 34249a8bc..34249a8bc 100644 --- a/slackbook/html/security.html +++ b/misc/slackbook/html/security.html diff --git a/slackbook/html/shell-bash.html b/misc/slackbook/html/shell-bash.html index 13ffdf089..13ffdf089 100644 --- a/slackbook/html/shell-bash.html +++ b/misc/slackbook/html/shell-bash.html diff --git a/slackbook/html/shell-command-line.html b/misc/slackbook/html/shell-command-line.html index 6188bd951..6188bd951 100644 --- a/slackbook/html/shell-command-line.html +++ b/misc/slackbook/html/shell-command-line.html diff --git a/slackbook/html/shell-vt.html b/misc/slackbook/html/shell-vt.html index 2d28160c5..2d28160c5 100644 --- a/slackbook/html/shell-vt.html +++ b/misc/slackbook/html/shell-vt.html diff --git a/slackbook/html/shell.html b/misc/slackbook/html/shell.html index aa259c8c7..aa259c8c7 100644 --- a/slackbook/html/shell.html +++ b/misc/slackbook/html/shell.html diff --git a/slackbook/html/slackware_logo.png b/misc/slackbook/html/slackware_logo.png Binary files differindex 3f2955e37..3f2955e37 100644 --- a/slackbook/html/slackware_logo.png +++ b/misc/slackbook/html/slackware_logo.png diff --git a/slackbook/html/system-configuration-kernel.html b/misc/slackbook/html/system-configuration-kernel.html index 7934fec42..7934fec42 100644 --- a/slackbook/html/system-configuration-kernel.html +++ b/misc/slackbook/html/system-configuration-kernel.html diff --git a/slackbook/html/system-configuration.html b/misc/slackbook/html/system-configuration.html index 2c88375a6..2c88375a6 100644 --- a/slackbook/html/system-configuration.html +++ b/misc/slackbook/html/system-configuration.html diff --git a/slackbook/html/system-configuration/make-menuconfig-w.png b/misc/slackbook/html/system-configuration/make-menuconfig-w.png Binary files differindex 848142905..848142905 100644 --- a/slackbook/html/system-configuration/make-menuconfig-w.png +++ b/misc/slackbook/html/system-configuration/make-menuconfig-w.png diff --git a/slackbook/html/vi-configuration.html b/misc/slackbook/html/vi-configuration.html index e37b86dda..e37b86dda 100644 --- a/slackbook/html/vi-configuration.html +++ b/misc/slackbook/html/vi-configuration.html diff --git a/slackbook/html/vi-keys.html b/misc/slackbook/html/vi-keys.html index a23863606..a23863606 100644 --- a/slackbook/html/vi-keys.html +++ b/misc/slackbook/html/vi-keys.html diff --git a/slackbook/html/vi-modes.html b/misc/slackbook/html/vi-modes.html index df8387976..df8387976 100644 --- a/slackbook/html/vi-modes.html +++ b/misc/slackbook/html/vi-modes.html diff --git a/slackbook/html/vi-opening-files.html b/misc/slackbook/html/vi-opening-files.html index db79dd08a..db79dd08a 100644 --- a/slackbook/html/vi-opening-files.html +++ b/misc/slackbook/html/vi-opening-files.html diff --git a/slackbook/html/vi-quitting-vi.html b/misc/slackbook/html/vi-quitting-vi.html index d600af002..d600af002 100644 --- a/slackbook/html/vi-quitting-vi.html +++ b/misc/slackbook/html/vi-quitting-vi.html diff --git a/slackbook/html/vi-saving-files.html b/misc/slackbook/html/vi-saving-files.html index 137c46b54..137c46b54 100644 --- a/slackbook/html/vi-saving-files.html +++ b/misc/slackbook/html/vi-saving-files.html diff --git a/slackbook/html/vi.html b/misc/slackbook/html/vi.html index d5fbf29f9..d5fbf29f9 100644 --- a/slackbook/html/vi.html +++ b/misc/slackbook/html/vi.html diff --git a/slackbook/html/vi/vim-splitedit.png b/misc/slackbook/html/vi/vim-splitedit.png Binary files differindex f1ce5ceb0..f1ce5ceb0 100644 --- a/slackbook/html/vi/vim-splitedit.png +++ b/misc/slackbook/html/vi/vim-splitedit.png diff --git a/slackbook/html/x-window-system-xdm.html b/misc/slackbook/html/x-window-system-xdm.html index 88b44e49e..88b44e49e 100644 --- a/slackbook/html/x-window-system-xdm.html +++ b/misc/slackbook/html/x-window-system-xdm.html diff --git a/slackbook/html/x-window-system-xinitrc.html b/misc/slackbook/html/x-window-system-xinitrc.html index 968b4c139..968b4c139 100644 --- a/slackbook/html/x-window-system-xinitrc.html +++ b/misc/slackbook/html/x-window-system-xinitrc.html diff --git a/slackbook/html/x-window-system-xorgsetup.html b/misc/slackbook/html/x-window-system-xorgsetup.html index 664f895fe..664f895fe 100644 --- a/slackbook/html/x-window-system-xorgsetup.html +++ b/misc/slackbook/html/x-window-system-xorgsetup.html diff --git a/slackbook/html/x-window-system-xwmconfig.html b/misc/slackbook/html/x-window-system-xwmconfig.html index 849d383a6..849d383a6 100644 --- a/slackbook/html/x-window-system-xwmconfig.html +++ b/misc/slackbook/html/x-window-system-xwmconfig.html diff --git a/slackbook/html/x-window-system.html b/misc/slackbook/html/x-window-system.html index 6aaf81bbc..6aaf81bbc 100644 --- a/slackbook/html/x-window-system.html +++ b/misc/slackbook/html/x-window-system.html diff --git a/slackbook/html/x-window-system/xorgconfig1-w.png b/misc/slackbook/html/x-window-system/xorgconfig1-w.png Binary files differindex bedcc0b30..bedcc0b30 100644 --- a/slackbook/html/x-window-system/xorgconfig1-w.png +++ b/misc/slackbook/html/x-window-system/xorgconfig1-w.png diff --git a/slackbook/html/x-window-system/xorgconfig2-w.png b/misc/slackbook/html/x-window-system/xorgconfig2-w.png Binary files differindex 82722c4be..82722c4be 100644 --- a/slackbook/html/x-window-system/xorgconfig2-w.png +++ b/misc/slackbook/html/x-window-system/xorgconfig2-w.png diff --git a/slackbook/html/x-window-system/xorgconfig3-w.png b/misc/slackbook/html/x-window-system/xorgconfig3-w.png Binary files differindex eb8c5c7d0..eb8c5c7d0 100644 --- a/slackbook/html/x-window-system/xorgconfig3-w.png +++ b/misc/slackbook/html/x-window-system/xorgconfig3-w.png diff --git a/slackbook/html/x-window-system/xorgconfig4-w.png b/misc/slackbook/html/x-window-system/xorgconfig4-w.png Binary files differindex 651da228d..651da228d 100644 --- a/slackbook/html/x-window-system/xorgconfig4-w.png +++ b/misc/slackbook/html/x-window-system/xorgconfig4-w.png diff --git a/slackbook/html/x-window-system/xwmconfig-w.png b/misc/slackbook/html/x-window-system/xwmconfig-w.png Binary files differindex 91c8cc015..91c8cc015 100644 --- a/slackbook/html/x-window-system/xwmconfig-w.png +++ b/misc/slackbook/html/x-window-system/xwmconfig-w.png diff --git a/slackbook/html/zipslack-booting.html b/misc/slackbook/html/zipslack-booting.html index 89dabfeef..89dabfeef 100644 --- a/slackbook/html/zipslack-booting.html +++ b/misc/slackbook/html/zipslack-booting.html diff --git a/slackbook/html/zipslack-getting.html b/misc/slackbook/html/zipslack-getting.html index 3e3e54f48..3e3e54f48 100644 --- a/slackbook/html/zipslack-getting.html +++ b/misc/slackbook/html/zipslack-getting.html diff --git a/slackbook/html/zipslack.html b/misc/slackbook/html/zipslack.html index 7edd94d25..7edd94d25 100644 --- a/slackbook/html/zipslack.html +++ b/misc/slackbook/html/zipslack.html diff --git a/slackbook/slackbook-2.0.pdf b/misc/slackbook/slackbook-2.0.pdf Binary files differindex 8961f55f4..8961f55f4 100644 --- a/slackbook/slackbook-2.0.pdf +++ b/misc/slackbook/slackbook-2.0.pdf diff --git a/slackbook/slackbook-2.0.ps b/misc/slackbook/slackbook-2.0.ps index 75b1c13b2..75b1c13b2 100644 --- a/slackbook/slackbook-2.0.ps +++ b/misc/slackbook/slackbook-2.0.ps diff --git a/recompress.sh b/recompress.sh index 80b2cb9ba..e525c74fa 100755 --- a/recompress.sh +++ b/recompress.sh @@ -11,26 +11,28 @@ gzip ./extra/source/kde3-compat/arts/arts.tmpdir.diff gzip ./extra/source/kde3-compat/kdelibs3/kdelibs-utempter.diff gzip ./extra/source/kde3-compat/kdelibs3/kdelibs.inotify.diff gzip ./extra/source/kde3-compat/kdelibs3/kdelibs.no.inotify.externs.diff +gzip ./extra/source/emacspeak/emacspeak-32.0.tcl8.5.diff gzip ./extra/source/grub/grub-0.97-x86_64.patch gzip ./extra/source/grub/grub_support_256byte_inode.patch gzip ./extra/source/grub/grubconfig_localefix.patch gzip ./extra/source/bittorrent/doinst.sh gzip ./extra/source/bittorrent/bittorrent-xterm.sh gzip ./extra/source/partitionmanager/doinst.sh +gzip ./extra/source/wicd/wicd-1.7.0-fix_script_bug.diff +gzip ./extra/source/wicd/wicd-1.7.0-fix_EAP_fast_typo.diff gzip ./extra/source/wicd/doinst.sh gzip ./extra/source/bash-completion/bash_completion.sh -gzip ./extra/source/bash-completion/bash-completion-xz.diff +gzip ./extra/source/bash-completion/bash-completion-1.1-pkgtools_tgxz.diff +gzip ./extra/source/bittornado/btdownloadxterm.sh +gzip ./extra/source/bittornado/doinst.sh gzip ./extra/source/tightvnc/doinst.sh gzip ./extra/source/tightvnc/tightvnc.paths-and-perms.diff -gzip ./testing/source/bash/doinst.sh gzip ./source/a/kbd/sources/kbd-1.15-unicode_start.patch gzip ./source/a/kbd/sources/speakupmap.map -gzip ./source/a/kbd/sources/kbd-1.15-po.patch gzip ./source/a/kbd/sources/kbd-1.15-keycodes-man.patch -gzip ./source/a/kbd/sources/kbd-1.15-quiet_doc.patch +gzip ./source/a/kbd/sources/kbd-1.15.2-po.patch gzip ./source/a/kbd/sources/kbd-1.15-resizecon-x86_64.patch gzip ./source/a/kbd/sources/nl.euro.diff -gzip ./source/a/kbd/sources/kbd-1.15-sparc.patch gzip ./source/a/pcmciautils/doinst.sh gzip ./source/a/dialog/dialog.smaller.min.height.diff gzip ./source/a/splitvt/splitvt_1.6.5-9.diff @@ -38,6 +40,7 @@ gzip ./source/a/bin/scripts/xx gzip ./source/a/bin/scripts/diskcopy gzip ./source/a/cpio/cpio-2.9.gcc43.diff gzip ./source/a/acl/acl.destdir.diff +gzip ./source/a/util-linux-ng/setserial-undef_TIOCGHAYESESP.diff gzip ./source/a/util-linux-ng/adjtimex_1.23-1.diff gzip ./source/a/util-linux-ng/setserial-rc.serial.diff gzip ./source/a/util-linux-ng/ziptool-fix_build.patch @@ -46,28 +49,14 @@ gzip ./source/a/util-linux-ng/net-tools.diff gzip ./source/a/util-linux-ng/net-tools_1.60-19.diff gzip ./source/a/util-linux-ng/util-linux-ng.fdisk-no-solaris.diff gzip ./source/a/lha/lha_1.14i-10.1.diff -gzip ./source/a/bash/patches/bash31-016 -gzip ./source/a/bash/patches/bash31-014 -gzip ./source/a/bash/patches/bash31-015 -gzip ./source/a/bash/patches/bash31-005 -gzip ./source/a/bash/patches/bash31-009 -gzip ./source/a/bash/patches/bash31-008 -gzip ./source/a/bash/patches/bash31-010 -gzip ./source/a/bash/patches/bash31-011 -gzip ./source/a/bash/patches/bash31-012 -gzip ./source/a/bash/patches/bash31-001 -gzip ./source/a/bash/patches/bash31-007 -gzip ./source/a/bash/patches/bash31-002 -gzip ./source/a/bash/patches/bash31-013 -gzip ./source/a/bash/patches/bash31-006 -gzip ./source/a/bash/patches/bash31-003 -gzip ./source/a/bash/patches/bash31-004 -gzip ./source/a/bash/patches/bash31-017 gzip ./source/a/bash/doinst.sh gzip ./source/a/tcsh/tcsh.nobuiltincolorls.diff gzip ./source/a/tcsh/doinst.sh +gzip ./source/a/elvis/elvis.ref.c.getline.diff gzip ./source/a/dbus/rc.messagebus gzip ./source/a/dbus/doinst.sh +gzip ./source/a/dbus/dbus-1.2.x-allow_root_globally.diff +gzip ./source/a/usb_modeswitch/doinst.sh gzip ./source/a/minicom/minicom.users gzip ./source/a/minicom/lrzsz_0.12.21-4.diff gzip ./source/a/minicom/wintcap.diff @@ -79,12 +68,12 @@ gzip ./source/a/acpid/rc.acpid gzip ./source/a/acpid/default gzip ./source/a/acpid/doinst.sh gzip ./source/a/acpid/acpi_handler.sh -gzip ./source/a/mkinitrd/busybox-1.12.1_inotify.diff -gzip ./source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff -gzip ./source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff gzip ./source/a/utempter/doinst.sh gzip ./source/a/lvm2/doinst.sh gzip ./source/a/sysvinit-functions/doinst.sh +gzip ./source/a/logrotate/logrotate.conf +gzip ./source/a/logrotate/logrotate.cron +gzip ./source/a/logrotate/doinst.sh gzip ./source/a/logrotate/logrotate.slackware.diff gzip ./source/a/etc/nsswitch.conf gzip ./source/a/etc/termcap-BSD @@ -96,8 +85,8 @@ gzip ./source/a/file/file.etc.file.diff gzip ./source/a/file/file.xz.magic gzip ./source/a/pciutils/pciutils.ids.dest.diff gzip ./source/a/tar/tar.nolonezero.diff +gzip ./source/a/tar/tar-1.23-support_txz.diff gzip ./source/a/tar/tar.norecordsizespam.diff -gzip ./source/a/tar/tar-1.22-support_txz.diff gzip ./source/a/tar/rmt.8 gzip ./source/a/tar/tar.1 gzip ./source/a/tar/tar-1.13.bzip2.diff @@ -123,26 +112,20 @@ gzip ./source/a/gpm/gpm-1.20.1-weak-wgetch.patch gzip ./source/a/gpm/gpm-1.20.1-nodebug.patch gzip ./source/a/gpm/gpm-1.20.1-input.patch gzip ./source/a/gpm/gpm-1.20.1-subscript.patch -gzip ./source/a/shadow/shadow.remove.obsolete.options.diff -gzip ./source/a/shadow/shadow.newgrp.getlogin -gzip ./source/a/shadow/shadow-4.0.3.x86_64.diff -gzip ./source/a/shadow/shadow.shadowconfig.diff -gzip ./source/a/shadow/shadow.gcc34.diff -gzip ./source/a/shadow/shadow.login.defs.diff -gzip ./source/a/shadow/shadow.newgrp.nopam +gzip ./source/a/shadow/useradd +gzip ./source/a/shadow/login.defs +gzip ./source/a/shadow/doinst.sh gzip ./source/a/zoo/zoo_2.10-18.diff gzip ./source/a/bzip2/bzip2-1.0.4.saneso.diff gzip ./source/a/e2fsprogs/doinst.sh gzip ./source/a/smartmontools/doinst.sh gzip ./source/a/usbutils/usbutils.ids.dest -gzip ./source/a/dcron/dcron-2.3.3.version.diff +gzip ./source/a/dcron/defs.h.TMPDIR.diff gzip ./source/a/dcron/run-parts.8 -gzip ./source/a/dcron/dcron-2.3.3.diff3 -gzip ./source/a/dcron/dcron-2.3.3.diff2 -gzip ./source/a/dcron/dcron-2.3.3.diff -gzip ./source/a/dcron/dcron.fork.diff -gzip ./source/a/dcron/dcron.tmpdir.diff -gzip ./source/a/dcron/dcron-2.3.3.crontab.diff4 +gzip ./source/a/dcron/crontab.c.O_EXCL.diff +gzip ./source/a/dcron/dcron.manpage.paths.diff +gzip ./source/a/dcron/crontab.root +gzip ./source/a/dcron/doinst.sh gzip ./source/a/dcron/run-parts gzip ./source/a/getty-ps/getty.bugfixes.diff gzip ./source/a/sysvinit/sysvinit.pidof.rhforkseverything.diff @@ -153,6 +136,7 @@ gzip ./source/a/sysklogd/sysklogd-1.4.1-owl-syslogd-crunch_list.diff gzip ./source/a/sysklogd/sysklogd_1.4.1-20.diff gzip ./source/a/udev/rule_generator.diff gzip ./source/a/udev/doinst.sh +gzip ./source/a/eject/eject.spaces.diff gzip ./source/a/genpower/genpower.halt.diff gzip ./source/a/genpower/genpower.var.diff gzip ./source/a/ncompress/ncompress.filenamelen.diff @@ -162,6 +146,7 @@ gzip ./source/a/ncompress/ncompress.lfs2.diff gzip ./source/a/ncompress/ncompress.make.diff gzip ./source/a/ncompress/ncompress.2GB.diff gzip ./source/a/ncompress/ncompress-4.2.4-endians.patch +gzip ./source/a/lilo/lilo.use_major_minor_instead_lvm_name.diff gzip ./source/a/procps/procinfo.gcc3.diff gzip ./source/a/procps/procps.nowarning.diff gzip ./source/a/procps/procps.w.showfrom.diff @@ -174,25 +159,26 @@ gzip ./source/a/coreutils/coreutils-dircolors.sh gzip ./source/a/mt-st/mt-st.man.diff gzip ./source/a/mt-st/mt-st.config.diff gzip ./source/a/mt-st/mt-st.sdlt.diff -gzip ./source/a/cups/cups.firefox.desktop.diff +gzip ./source/a/cups/usb-backend-both-usblp-and-libusb.dpatch gzip ./source/a/cups/doinst.sh gzip ./source/a/devs/makedev_2.3.1-46.2.diff gzip ./source/a/devs/makedev_2.3.1.slack.diff gzip ./source/a/devs/makedev_2.3.1.hd.diff gzip ./source/a/devs/makedev.hd.diff -gzip ./source/a/mdadm/mdadm.static.small.diff +gzip ./source/a/rpm2tgz/patches/0003-allow-every-user-to-use-rpm2tgz.patch +gzip ./source/a/rpm2tgz/patches/0004-produce-more-compliant-slack-desc.patch +gzip ./source/a/rpm2tgz/patches/0005-gzip-man-info-pages.patch +gzip ./source/a/rpm2tgz/patches/0006-should-we-use-.txz-format-in-slackware-current.patch +gzip ./source/a/rpm2tgz/patches/0002-fix-spurious-path-to-rpm-file-with-n-option.patch +gzip ./source/a/rpm2tgz/patches/0001-fix-d-handling.patch +gzip ./source/a/mdadm/mdadm.static.diff gzip ./source/a/mdadm/doinst.sh gzip ./source/a/findutils/findutils.no.default.options.warnings.diff gzip ./source/a/findutils/findutils.nolocate.diff gzip ./source/a/attr/attr.destdir.diff -gzip ./source/a/module-init-tools/modprobe.favor.etc.modprobe.d.diff gzip ./source/a/module-init-tools/modprobe.ignore_some_suffixes.diff -gzip ./source/a/module-init-tools/modprobe.no_sys_check.diff -gzip ./source/a/module-init-tools/doinst.sh +gzip ./source/a/module-init-tools/modprobe.quit.whining.about.modprobe.conf.diff gzip ./source/a/unarj/Makefile -gzip ./source/k/2.6.29.x-intel-crash-patch.diff -gzip ./source/k/linux-2.6.29.6-02-default-mmap_min_addr-4096.diff -gzip ./source/k/linux-2.6.29.6-01-sendpage.diff gzip ./source/n/httpd/httpd.nossldefault.diff gzip ./source/n/httpd/config.layout.diff gzip ./source/n/httpd/httpd.runasapache.diff @@ -209,19 +195,24 @@ gzip ./source/n/htdig/htdig.conf.diff gzip ./source/n/htdig/htdig-3.2.0b6.diff gzip ./source/n/htdig/doinst.sh gzip ./source/n/lftp/doinst.sh -gzip ./source/n/irssi/irsi-0.8.14.manpage_fix.diff +gzip ./source/n/irssi/irssi.ssl_proxy.diff +gzip ./source/n/irssi/irssi.manpage_fix.diff gzip ./source/n/irssi/doinst.sh gzip ./source/n/openssh/doinst.sh +gzip ./source/n/bluez/patches/bluez-dbus-config.patch +gzip ./source/n/bluez/patches/bluez-run_udev_helper.patch +gzip ./source/n/bluez/patches/bluez-unbreak_dell_mouse.patch +gzip ./source/n/bluez/doinst.sh gzip ./source/n/mailx/doinst.sh gzip ./source/n/nfs-utils/nfs-utils.lwrap.needs.lnsl.diff gzip ./source/n/network-scripts/doinst.sh gzip ./source/n/netkit-timed/netkit-timed-0.17.diff gzip ./source/n/ytalk/doinst.sh gzip ./source/n/stunnel/doinst.sh -gzip ./source/n/netatalk/netatalk-2.0.4-afpdconf.diff -gzip ./source/n/netatalk/netatalk-2.0.4-without_xfs.diff gzip ./source/n/netatalk/netatalk.etc2ps.diff +gzip ./source/n/netatalk/netatalk.afpdconf.diff gzip ./source/n/netatalk/doinst.sh +gzip ./source/n/netatalk/netatalk.without_xfs.diff gzip ./source/n/icmpinfo/icmpinfo-1.11.diff gzip ./source/n/netwrite/netwrite-0.17.diff gzip ./source/n/bsd-finger/bsd-finger-0.17.diff @@ -238,25 +229,31 @@ gzip ./source/n/nmap/nmap.ndiff.mandir.diff gzip ./source/n/procmail/procmail_3.22-5.diff gzip ./source/n/procmail/procmail.lfs.diff gzip ./source/n/rp-pppoe/doinst.sh -gzip ./source/n/bluez-utils/doinst.sh gzip ./source/n/pidentd/pidentd.conf.diff gzip ./source/n/pidentd/doinst.sh gzip ./source/n/dhcpcd/COPYRIGHT -gzip ./source/n/dhcpcd/patches/config.h.diff -gzip ./source/n/dhcpcd/patches/dhcpcd.8.in.diff -gzip ./source/n/dhcpcd/patches/dhcpcd.sh.diff -gzip ./source/n/dhcpcd/dhcpcd.vararg.diff +gzip ./source/n/dhcpcd/50-ntp.conf.diff +gzip ./source/n/dhcpcd/doinst.sh gzip ./source/n/sendmail/Build gzip ./source/n/popa3d/popa3d.diff gzip ./source/n/popa3d/doinst.sh -gzip ./source/n/traceroute/traceroute.no.domain.strip.diff -gzip ./source/n/traceroute/traceroute_1.4a12-5.diff gzip ./source/n/nc/nc-110-21.diff gzip ./source/n/nc/nc.diff -gzip ./source/n/rdist/rdist-6.1.5-cleanup.diff -gzip ./source/n/rdist/rdist-6.1.5-varargs.diff -gzip ./source/n/rdist/rdist-6.1.5-bison.diff -gzip ./source/n/rdist/rdist-6.1.5.diff +gzip ./source/n/dhcp/doinst.sh +gzip ./source/n/dhcp/dhclient-script.PATH.diff +gzip ./source/n/rdist/rdist-6.1.5-06.maxargs.diff +gzip ./source/n/rdist/rdist-6.1.5-04.bison.diff +gzip ./source/n/rdist/rdist-6.1.5-05.varargs.diff +gzip ./source/n/rdist/rdist-6.1.5-10.ssh.diff +gzip ./source/n/rdist/rdist-6.1.5-01.links.diff +gzip ./source/n/rdist/rdist-6.1.5-07.lfs.diff +gzip ./source/n/rdist/rdist-6.1.5-12.stat64.diff +gzip ./source/n/rdist/rdist-6.1.5-00.linux.diff +gzip ./source/n/rdist/rdist-6.1.5-11.mkstemp.diff +gzip ./source/n/rdist/rdist-6.1.5-08.cleanup.diff +gzip ./source/n/rdist/rdist-6.1.5-14.fix-msgsndnotify-loop.diff +gzip ./source/n/rdist/rdist-6.1.5-03.hardlink.diff +gzip ./source/n/rdist/rdist-6.1.5-09.svr4.diff gzip ./source/n/netdate/netdate.diff gzip ./source/n/netdate/netdate.diff2 gzip ./source/n/wget/doinst.sh @@ -265,15 +262,19 @@ gzip ./source/n/samba/doinst.sh gzip ./source/n/samba/smb.conf.diff gzip ./source/n/php/php.ini.diff gzip ./source/n/php/php.recommended.ini.diff +gzip ./source/n/php/php.gmp5.diff +gzip ./source/n/php/php.gd_libpng-1.4.diff gzip ./source/n/php/doinst.sh gzip ./source/n/alpine/alpine.manpage.diff gzip ./source/n/alpine/alpine.config.h.diff gzip ./source/n/alpine/alpine.tech-notes.txt.diff gzip ./source/n/alpine/pinepgp-0.18.0-makefile-sed-fix.diff gzip ./source/n/alpine/pinepgp.pinegpgp.in.diff +gzip ./source/n/obex-data-server/doinst.sh gzip ./source/n/nn/nn.diff gzip ./source/n/nn/nntpserver gzip ./source/n/nn/nn.destdir.diff +gzip ./source/n/nn/m-x86_64.h gzip ./source/n/nn/nn.badnntphost.diff gzip ./source/n/nn/doinst.sh gzip ./source/n/nn/NNTP @@ -281,9 +282,8 @@ gzip ./source/n/net-snmp/snmpd.conf gzip ./source/n/net-snmp/doinst.sh gzip ./source/n/trn/config.sh gzip ./source/n/trn/config.x86_64.sh -gzip ./source/n/iproute2/iproute2.dbpath.diff +gzip ./source/n/iproute2/iproute2-2.6.33-fixup_dbpath_and_iptablespath.diff gzip ./source/n/iproute2/doinst.sh -gzip ./source/n/iproute2/iproute2.iptablespath.diff gzip ./source/n/biff+comsat/biff+comsat.offset.diff gzip ./source/n/biff+comsat/biff+comsat-0.17.diff gzip ./source/n/biff+comsat/biff+comsat.badutmp.diff @@ -294,6 +294,7 @@ gzip ./source/n/telnet/telnet-OpenBSD-20020321.diff gzip ./source/n/bootp/bootptab gzip ./source/n/bootp/bootp_2.4.3-15.diff gzip ./source/n/bridge-utils/bridge-utils.isbridge.diff +gzip ./source/n/tcpdump/libpcap.20-fix-any-intf.diff gzip ./source/n/netkit-rwho/rwhod_getloadavg.diff gzip ./source/n/netkit-rwho/netkit-rwho-0.17.diff gzip ./source/n/mutt/doinst.sh @@ -301,12 +302,13 @@ gzip ./source/n/bind/bind.man.diff gzip ./source/n/bind/bind.var.run.named.diff gzip ./source/n/bind/bind.so_bsdcompat.diff gzip ./source/n/bind/doinst.sh +gzip ./source/n/gnupg2/gnupg-2.0.14-encode-s2k.patch gzip ./source/n/openssl/openssl.optsx86.diff gzip ./source/n/openssl/openssl.soname.diff gzip ./source/n/openssl/doinst.sh-openssl gzip ./source/n/openssl/doinst.sh-openssl-solibs -gzip ./source/n/openssl/openssl.no-extssl.diff gzip ./source/n/openssl/certwatch +gzip ./source/n/bluez-hcidump/hci.c_for_bluez-4.61.patch gzip ./source/n/wireless-tools/wireless_tools.nowhine.diff gzip ./source/n/wireless-tools/doinst.sh gzip ./source/n/wireless-tools/wireless_tools.static.diff @@ -324,13 +326,11 @@ gzip ./source/n/ppp/pppsetup-1.98.backupfiles.diff gzip ./source/n/ppp/doinst.sh gzip ./source/n/ppp/pppsetup-1.98.moredevs.diff gzip ./source/n/ppp/radius.msdict -gzip ./source/n/autofs/autofs.x86_64.diff -gzip ./source/n/autofs/autofs.gcc.fix.diff -gzip ./source/n/autofs/autofs-3.1.7.diff -gzip ./source/n/mtr/mtr-0.73.configure.error.diff +gzip ./source/n/autofs/autofs-5.0.5-fix-libxml2-workaround-configure.patch +gzip ./source/n/autofs/doinst.sh +gzip ./source/n/obexftp/ruby_rstringlen.diff gzip ./source/n/cyrus-sasl/rc.saslauthd gzip ./source/n/cyrus-sasl/doinst.sh -gzip ./source/n/vsftpd/vsftpd.vsf_findlibs.sh.diff gzip ./source/n/vsftpd/vsftpd.log gzip ./source/n/vsftpd/vsftpd.conf.diff gzip ./source/n/vsftpd/doinst.sh @@ -342,14 +342,14 @@ gzip ./source/n/proftpd/doinst.sh gzip ./source/n/netkit-ntalk/netkit-ntalk-0.11.diff gzip ./source/n/netkit-ntalk/ntalk-0.17-slackware-alt-talkd.patch gzip ./source/n/netkit-ntalk/netkit-ntalk-0.17.diff +gzip ./source/n/ntp/ntp.nano.diff gzip ./source/n/ntp/doinst.sh -gzip ./source/installer/busybox-1.12.1_inotify.diff -gzip ./source/ap/hplip/hplip.prevent_segfault.diff +gzip ./source/installer/dhcpcd/config.h.diff +gzip ./source/installer/dhcpcd/dhcpcd.sh.diff +gzip ./source/installer/busybox.2.6.32.2.diff gzip ./source/ap/hplip/doinst.sh gzip ./source/ap/xfsdump/xfsdump.destdir.diff -gzip ./source/ap/sysstat/sysstat.etc.sysstat.diff -gzip ./source/ap/sysstat/sysstat.var.run.diff -gzip ./source/ap/sysstat/sysstat.prefix.usr.diff +gzip ./source/ap/sysstat/doinst.sh gzip ./source/ap/ghostscript-fonts-std/doinst.sh gzip ./source/ap/groff/groff.docdir.diff gzip ./source/ap/groff/groff.man.mdoc.local @@ -399,10 +399,9 @@ gzip ./source/ap/ash/patches/ash-redir.patch gzip ./source/ap/ash/patches/ash-jobs.patch gzip ./source/ap/dmidecode/dmidecode.makefile.diff gzip ./source/ap/cdparanoia/cdparanoia-III-10.2_cdda_private.patch -gzip ./source/ap/radeontool/radeontool.c.diff gzip ./source/ap/sqlite/COPYRIGHT gzip ./source/ap/ghostscript/cidfmap -gzip ./source/ap/linuxdoc-tools/sources/docbook_4.5-4.diff +gzip ./source/ap/ghostscript/ghostscript-pdf2dsc.patch gzip ./source/ap/linuxdoc-tools/sources/libsgmls-perl_1.03ii-32.diff gzip ./source/ap/dmapi/dmapi.destdir.diff gzip ./source/ap/rpm/doinst.sh @@ -411,23 +410,31 @@ gzip ./source/ap/at/doinst.sh gzip ./source/ap/aumix/aumix.alsa.diff gzip ./source/ap/mysql/rc.mysqld gzip ./source/ap/mysql/doinst.sh -gzip ./source/ap/jed/jed.mouse.diff -gzip ./source/ap/jed/jed.multibyte.diff gzip ./source/ap/foomatic-filters/doinst.sh gzip ./source/ap/zsh/zsh-4.3.10-add_new_pkg_completion.diff gzip ./source/ap/zsh/doinst.sh gzip ./source/ap/flac/flac.man.diff +gzip ./source/ap/vim/patches/7.2.334 +gzip ./source/ap/vim/patches/7.2.328 gzip ./source/ap/vim/patches/7.2.130 gzip ./source/ap/vim/patches/7.2.243 gzip ./source/ap/vim/patches/7.2.194 gzip ./source/ap/vim/patches/7.2.110 gzip ./source/ap/vim/patches/7.2.068 +gzip ./source/ap/vim/patches/7.2.358 gzip ./source/ap/vim/patches/7.2.085 +gzip ./source/ap/vim/patches/7.2.375 gzip ./source/ap/vim/patches/7.2.105 gzip ./source/ap/vim/patches/7.2.095 gzip ./source/ap/vim/patches/7.2.113 +gzip ./source/ap/vim/patches/7.2.394 gzip ./source/ap/vim/patches/7.2.024 +gzip ./source/ap/vim/patches/7.2.360 +gzip ./source/ap/vim/patches/7.2.324 +gzip ./source/ap/vim/patches/7.2.318 gzip ./source/ap/vim/patches/7.2.062 +gzip ./source/ap/vim/patches/7.2.275 +gzip ./source/ap/vim/patches/7.2.415 gzip ./source/ap/vim/patches/7.2.136 gzip ./source/ap/vim/patches/7.2.106 gzip ./source/ap/vim/patches/7.2.033 @@ -436,83 +443,156 @@ gzip ./source/ap/vim/patches/7.2.189 gzip ./source/ap/vim/patches/7.2.163 gzip ./source/ap/vim/patches/7.2.201 gzip ./source/ap/vim/patches/7.2.120 +gzip ./source/ap/vim/patches/7.2.403 gzip ./source/ap/vim/patches/7.2.240 +gzip ./source/ap/vim/patches/7.2.262 gzip ./source/ap/vim/patches/7.2.035 +gzip ./source/ap/vim/patches/7.2.372 +gzip ./source/ap/vim/patches/7.2.401 gzip ./source/ap/vim/patches/7.2.069 gzip ./source/ap/vim/patches/7.2.244 gzip ./source/ap/vim/patches/7.2.153 +gzip ./source/ap/vim/patches/7.2.296 gzip ./source/ap/vim/patches/7.2.030 +gzip ./source/ap/vim/patches/7.2.373 +gzip ./source/ap/vim/patches/7.2.388 +gzip ./source/ap/vim/patches/7.2.252 gzip ./source/ap/vim/patches/7.2.154 gzip ./source/ap/vim/patches/7.2.179 +gzip ./source/ap/vim/patches/7.2.348 gzip ./source/ap/vim/patches/7.2.185 +gzip ./source/ap/vim/patches/7.2.363 gzip ./source/ap/vim/patches/7.2.064 +gzip ./source/ap/vim/patches/7.2.377 +gzip ./source/ap/vim/patches/7.2.374 gzip ./source/ap/vim/patches/7.2.116 +gzip ./source/ap/vim/patches/7.2.255 +gzip ./source/ap/vim/patches/7.2.352 +gzip ./source/ap/vim/patches/7.2.272 gzip ./source/ap/vim/patches/7.2.010 +gzip ./source/ap/vim/patches/7.2.278 gzip ./source/ap/vim/patches/7.2.121 gzip ./source/ap/vim/patches/7.2.245 gzip ./source/ap/vim/patches/7.2.117 +gzip ./source/ap/vim/patches/7.2.277 gzip ./source/ap/vim/patches/7.2.178 +gzip ./source/ap/vim/patches/7.2.391 +gzip ./source/ap/vim/patches/7.2.362 +gzip ./source/ap/vim/patches/7.2.264 gzip ./source/ap/vim/patches/7.2.124 +gzip ./source/ap/vim/patches/7.2.280 gzip ./source/ap/vim/patches/7.2.101 gzip ./source/ap/vim/patches/7.2.061 gzip ./source/ap/vim/patches/7.2.187 +gzip ./source/ap/vim/patches/7.2.387 gzip ./source/ap/vim/patches/7.2.060 +gzip ./source/ap/vim/patches/7.2.306 gzip ./source/ap/vim/patches/7.2.075 +gzip ./source/ap/vim/patches/7.2.266 +gzip ./source/ap/vim/patches/7.2.267 +gzip ./source/ap/vim/patches/7.2.390 gzip ./source/ap/vim/patches/7.2.131 gzip ./source/ap/vim/patches/7.2.166 +gzip ./source/ap/vim/patches/7.2.406 gzip ./source/ap/vim/patches/7.2.219 +gzip ./source/ap/vim/patches/7.2.317 gzip ./source/ap/vim/patches/7.2.090 gzip ./source/ap/vim/patches/7.2.170 gzip ./source/ap/vim/patches/7.2.129 +gzip ./source/ap/vim/patches/7.2.404 gzip ./source/ap/vim/patches/7.2.088 gzip ./source/ap/vim/patches/7.2.200 gzip ./source/ap/vim/patches/7.2.204 +gzip ./source/ap/vim/patches/7.2.376 +gzip ./source/ap/vim/patches/7.2.311 +gzip ./source/ap/vim/patches/7.2.321 gzip ./source/ap/vim/patches/7.2.216 +gzip ./source/ap/vim/patches/7.2.281 +gzip ./source/ap/vim/patches/7.2.402 gzip ./source/ap/vim/patches/7.2.097 gzip ./source/ap/vim/patches/7.2.125 gzip ./source/ap/vim/patches/7.2.041 gzip ./source/ap/vim/patches/7.2.013 +gzip ./source/ap/vim/patches/7.2.276 gzip ./source/ap/vim/patches/7.2.055 +gzip ./source/ap/vim/patches/7.2.293 gzip ./source/ap/vim/patches/7.2.152 +gzip ./source/ap/vim/patches/7.2.410 gzip ./source/ap/vim/patches/7.2.169 +gzip ./source/ap/vim/patches/7.2.251 +gzip ./source/ap/vim/patches/7.2.411 gzip ./source/ap/vim/patches/7.2.128 gzip ./source/ap/vim/patches/7.2.126 +gzip ./source/ap/vim/patches/7.2.261 gzip ./source/ap/vim/patches/7.2.157 +gzip ./source/ap/vim/patches/7.2.305 +gzip ./source/ap/vim/patches/7.2.254 gzip ./source/ap/vim/patches/7.2.079 gzip ./source/ap/vim/patches/7.2.222 gzip ./source/ap/vim/patches/7.2.007 +gzip ./source/ap/vim/patches/7.2.412 gzip ./source/ap/vim/patches/7.2.180 gzip ./source/ap/vim/patches/7.2.044 +gzip ./source/ap/vim/patches/7.2.399 gzip ./source/ap/vim/patches/7.2.045 +gzip ./source/ap/vim/patches/7.2.282 +gzip ./source/ap/vim/patches/7.2.331 gzip ./source/ap/vim/patches/7.2.234 +gzip ./source/ap/vim/patches/7.2.345 gzip ./source/ap/vim/patches/7.2.098 +gzip ./source/ap/vim/patches/7.2.298 gzip ./source/ap/vim/patches/7.2.239 +gzip ./source/ap/vim/patches/7.2.301 +gzip ./source/ap/vim/patches/7.2.392 gzip ./source/ap/vim/patches/7.2.237 +gzip ./source/ap/vim/patches/7.2.340 gzip ./source/ap/vim/patches/7.2.056 gzip ./source/ap/vim/patches/7.2.191 gzip ./source/ap/vim/patches/7.2.159 gzip ./source/ap/vim/patches/7.2.080 gzip ./source/ap/vim/patches/7.2.214 +gzip ./source/ap/vim/patches/7.2.270 +gzip ./source/ap/vim/patches/7.2.381 +gzip ./source/ap/vim/patches/7.2.371 gzip ./source/ap/vim/patches/7.2.142 +gzip ./source/ap/vim/patches/7.2.369 gzip ./source/ap/vim/patches/7.2.172 gzip ./source/ap/vim/patches/7.2.134 gzip ./source/ap/vim/patches/7.2.135 gzip ./source/ap/vim/patches/7.2.076 +gzip ./source/ap/vim/patches/7.2.398 +gzip ./source/ap/vim/patches/7.2.271 gzip ./source/ap/vim/patches/7.2.071 gzip ./source/ap/vim/patches/7.2.190 +gzip ./source/ap/vim/patches/7.2.312 +gzip ./source/ap/vim/patches/7.2.384 +gzip ./source/ap/vim/patches/7.2.294 gzip ./source/ap/vim/patches/7.2.220 gzip ./source/ap/vim/patches/7.2.070 +gzip ./source/ap/vim/patches/7.2.257 gzip ./source/ap/vim/patches/7.2.059 +gzip ./source/ap/vim/patches/7.2.361 +gzip ./source/ap/vim/patches/7.2.356 gzip ./source/ap/vim/patches/7.2.006 +gzip ./source/ap/vim/patches/7.2.283 gzip ./source/ap/vim/patches/7.2.096 gzip ./source/ap/vim/patches/7.2.226 gzip ./source/ap/vim/patches/7.2.023 +gzip ./source/ap/vim/patches/7.2.368 gzip ./source/ap/vim/patches/7.2.083 +gzip ./source/ap/vim/patches/7.2.329 gzip ./source/ap/vim/patches/7.2.054 gzip ./source/ap/vim/patches/7.2.122 gzip ./source/ap/vim/patches/7.2.052 +gzip ./source/ap/vim/patches/7.2.354 gzip ./source/ap/vim/patches/7.2.235 +gzip ./source/ap/vim/patches/7.2.326 +gzip ./source/ap/vim/patches/7.2.248 +gzip ./source/ap/vim/patches/7.2.379 +gzip ./source/ap/vim/patches/7.2.259 gzip ./source/ap/vim/patches/7.2.241 +gzip ./source/ap/vim/patches/7.2.342 +gzip ./source/ap/vim/patches/7.2.307 gzip ./source/ap/vim/patches/7.2.111 gzip ./source/ap/vim/patches/7.2.034 gzip ./source/ap/vim/patches/7.2.081 @@ -524,6 +604,7 @@ gzip ./source/ap/vim/patches/7.2.032 gzip ./source/ap/vim/patches/7.2.156 gzip ./source/ap/vim/patches/7.2.009 gzip ./source/ap/vim/patches/7.2.016 +gzip ./source/ap/vim/patches/7.2.386 gzip ./source/ap/vim/patches/7.2.004 gzip ./source/ap/vim/patches/7.2.091 gzip ./source/ap/vim/patches/7.2.205 @@ -531,87 +612,137 @@ gzip ./source/ap/vim/patches/7.2.150 gzip ./source/ap/vim/patches/7.2.236 gzip ./source/ap/vim/patches/7.2.089 gzip ./source/ap/vim/patches/7.2.092 +gzip ./source/ap/vim/patches/7.2.288 gzip ./source/ap/vim/patches/7.2.160 +gzip ./source/ap/vim/patches/7.2.258 +gzip ./source/ap/vim/patches/7.2.247 +gzip ./source/ap/vim/patches/7.2.350 +gzip ./source/ap/vim/patches/7.2.289 gzip ./source/ap/vim/patches/7.2.206 gzip ./source/ap/vim/patches/7.2.199 gzip ./source/ap/vim/patches/7.2.162 gzip ./source/ap/vim/patches/7.2.215 gzip ./source/ap/vim/patches/7.2.102 gzip ./source/ap/vim/patches/7.2.207 +gzip ./source/ap/vim/patches/7.2.249 +gzip ./source/ap/vim/patches/7.2.316 +gzip ./source/ap/vim/patches/7.2.323 gzip ./source/ap/vim/patches/7.2.198 +gzip ./source/ap/vim/patches/7.2.263 +gzip ./source/ap/vim/patches/7.2.297 gzip ./source/ap/vim/patches/7.2.197 gzip ./source/ap/vim/patches/7.2.094 gzip ./source/ap/vim/patches/7.2.043 gzip ./source/ap/vim/patches/7.2.186 gzip ./source/ap/vim/patches/7.2.223 +gzip ./source/ap/vim/patches/7.2.309 gzip ./source/ap/vim/patches/7.2.046 gzip ./source/ap/vim/patches/7.2.230 +gzip ./source/ap/vim/patches/7.2.333 +gzip ./source/ap/vim/patches/7.2.268 gzip ./source/ap/vim/patches/7.2.042 +gzip ./source/ap/vim/patches/7.2.290 gzip ./source/ap/vim/patches/7.2.228 +gzip ./source/ap/vim/patches/7.2.304 +gzip ./source/ap/vim/patches/7.2.343 gzip ./source/ap/vim/patches/7.2.058 gzip ./source/ap/vim/patches/7.2.029 gzip ./source/ap/vim/patches/7.2.077 gzip ./source/ap/vim/patches/7.2.217 gzip ./source/ap/vim/patches/7.2.078 gzip ./source/ap/vim/patches/7.2.093 +gzip ./source/ap/vim/patches/7.2.335 +gzip ./source/ap/vim/patches/7.2.310 gzip ./source/ap/vim/patches/7.2.218 +gzip ./source/ap/vim/patches/7.2.405 gzip ./source/ap/vim/patches/7.2.181 +gzip ./source/ap/vim/patches/7.2.414 gzip ./source/ap/vim/patches/7.2.138 gzip ./source/ap/vim/patches/7.2.119 gzip ./source/ap/vim/patches/7.2.063 gzip ./source/ap/vim/patches/7.2.225 gzip ./source/ap/vim/patches/7.2.003 +gzip ./source/ap/vim/patches/7.2.380 gzip ./source/ap/vim/patches/7.2.144 gzip ./source/ap/vim/patches/7.2.145 +gzip ./source/ap/vim/patches/7.2.389 gzip ./source/ap/vim/patches/7.2.065 gzip ./source/ap/vim/patches/7.2.184 gzip ./source/ap/vim/patches/7.2.188 gzip ./source/ap/vim/patches/7.2.099 gzip ./source/ap/vim/patches/7.2.109 gzip ./source/ap/vim/patches/7.2.074 +gzip ./source/ap/vim/patches/7.2.397 gzip ./source/ap/vim/patches/7.2.209 gzip ./source/ap/vim/patches/7.2.087 gzip ./source/ap/vim/patches/7.2.107 gzip ./source/ap/vim/patches/7.2.143 +gzip ./source/ap/vim/patches/7.2.246 +gzip ./source/ap/vim/patches/7.2.299 gzip ./source/ap/vim/patches/7.2.115 gzip ./source/ap/vim/patches/7.2.233 +gzip ./source/ap/vim/patches/7.2.327 gzip ./source/ap/vim/patches/7.2.028 gzip ./source/ap/vim/patches/7.2.025 gzip ./source/ap/vim/patches/7.2.082 gzip ./source/ap/vim/patches/7.2.183 gzip ./source/ap/vim/patches/7.2.165 gzip ./source/ap/vim/patches/7.2.037 +gzip ./source/ap/vim/patches/7.2.347 gzip ./source/ap/vim/patches/7.2.213 gzip ./source/ap/vim/patches/7.2.175 gzip ./source/ap/vim/patches/7.2.238 +gzip ./source/ap/vim/patches/7.2.370 +gzip ./source/ap/vim/patches/7.2.351 +gzip ./source/ap/vim/patches/7.2.314 gzip ./source/ap/vim/patches/7.2.168 gzip ./source/ap/vim/patches/7.2.048 gzip ./source/ap/vim/patches/7.2.021 +gzip ./source/ap/vim/patches/7.2.330 +gzip ./source/ap/vim/patches/7.2.279 gzip ./source/ap/vim/patches/7.2.104 gzip ./source/ap/vim/patches/7.2.015 +gzip ./source/ap/vim/patches/7.2.383 gzip ./source/ap/vim/patches/7.2.103 gzip ./source/ap/vim/patches/7.2.051 gzip ./source/ap/vim/patches/7.2.039 gzip ./source/ap/vim/patches/7.2.140 +gzip ./source/ap/vim/patches/7.2.269 +gzip ./source/ap/vim/patches/7.2.303 +gzip ./source/ap/vim/patches/7.2.341 +gzip ./source/ap/vim/patches/7.2.349 gzip ./source/ap/vim/patches/7.2.112 +gzip ./source/ap/vim/patches/7.2.308 gzip ./source/ap/vim/patches/7.2.050 gzip ./source/ap/vim/patches/7.2.203 gzip ./source/ap/vim/patches/7.2.132 gzip ./source/ap/vim/patches/7.2.017 +gzip ./source/ap/vim/patches/7.2.284 +gzip ./source/ap/vim/patches/7.2.378 gzip ./source/ap/vim/patches/7.2.242 +gzip ./source/ap/vim/patches/7.2.408 gzip ./source/ap/vim/patches/7.2.137 gzip ./source/ap/vim/patches/7.2.195 +gzip ./source/ap/vim/patches/7.2.260 +gzip ./source/ap/vim/patches/7.2.364 gzip ./source/ap/vim/patches/7.2.167 +gzip ./source/ap/vim/patches/7.2.250 gzip ./source/ap/vim/patches/7.2.141 +gzip ./source/ap/vim/patches/7.2.355 gzip ./source/ap/vim/patches/7.2.227 gzip ./source/ap/vim/patches/7.2.139 gzip ./source/ap/vim/patches/7.2.018 +gzip ./source/ap/vim/patches/7.2.382 gzip ./source/ap/vim/patches/7.2.176 +gzip ./source/ap/vim/patches/7.2.291 gzip ./source/ap/vim/patches/7.2.001 +gzip ./source/ap/vim/patches/7.2.295 gzip ./source/ap/vim/patches/7.2.123 gzip ./source/ap/vim/patches/7.2.208 gzip ./source/ap/vim/patches/7.2.020 gzip ./source/ap/vim/patches/7.2.193 +gzip ./source/ap/vim/patches/7.2.393 +gzip ./source/ap/vim/patches/7.2.357 gzip ./source/ap/vim/patches/7.2.146 gzip ./source/ap/vim/patches/7.2.100 gzip ./source/ap/vim/patches/7.2.229 @@ -621,47 +752,85 @@ gzip ./source/ap/vim/patches/7.2.211 gzip ./source/ap/vim/patches/7.2.108 gzip ./source/ap/vim/patches/7.2.224 gzip ./source/ap/vim/patches/7.2.026 +gzip ./source/ap/vim/patches/7.2.367 gzip ./source/ap/vim/patches/7.2.192 gzip ./source/ap/vim/patches/7.2.040 +gzip ./source/ap/vim/patches/7.2.322 +gzip ./source/ap/vim/patches/7.2.273 +gzip ./source/ap/vim/patches/7.2.395 gzip ./source/ap/vim/patches/7.2.171 gzip ./source/ap/vim/patches/7.2.005 +gzip ./source/ap/vim/patches/7.2.409 +gzip ./source/ap/vim/patches/7.2.320 +gzip ./source/ap/vim/patches/7.2.407 gzip ./source/ap/vim/patches/7.2.182 +gzip ./source/ap/vim/patches/7.2.256 gzip ./source/ap/vim/patches/7.2.049 gzip ./source/ap/vim/patches/7.2.053 +gzip ./source/ap/vim/patches/7.2.319 gzip ./source/ap/vim/patches/7.2.031 +gzip ./source/ap/vim/patches/7.2.337 +gzip ./source/ap/vim/patches/7.2.300 +gzip ./source/ap/vim/patches/7.2.344 +gzip ./source/ap/vim/patches/7.2.385 gzip ./source/ap/vim/patches/7.2.212 gzip ./source/ap/vim/patches/7.2.118 +gzip ./source/ap/vim/patches/7.2.365 gzip ./source/ap/vim/patches/7.2.038 gzip ./source/ap/vim/patches/7.2.196 +gzip ./source/ap/vim/patches/7.2.274 +gzip ./source/ap/vim/patches/7.2.396 +gzip ./source/ap/vim/patches/7.2.346 gzip ./source/ap/vim/patches/7.2.232 gzip ./source/ap/vim/patches/7.2.127 gzip ./source/ap/vim/patches/7.2.151 gzip ./source/ap/vim/patches/7.2.073 +gzip ./source/ap/vim/patches/7.2.366 gzip ./source/ap/vim/patches/7.2.066 +gzip ./source/ap/vim/patches/7.2.413 gzip ./source/ap/vim/patches/7.2.086 gzip ./source/ap/vim/patches/7.2.173 gzip ./source/ap/vim/patches/7.2.012 +gzip ./source/ap/vim/patches/7.2.338 gzip ./source/ap/vim/patches/7.2.057 gzip ./source/ap/vim/patches/7.2.067 gzip ./source/ap/vim/patches/7.2.221 +gzip ./source/ap/vim/patches/7.2.325 +gzip ./source/ap/vim/patches/7.2.400 +gzip ./source/ap/vim/patches/7.2.265 gzip ./source/ap/vim/patches/7.2.072 gzip ./source/ap/vim/patches/7.2.022 +gzip ./source/ap/vim/patches/7.2.292 +gzip ./source/ap/vim/patches/7.2.353 +gzip ./source/ap/vim/patches/7.2.285 gzip ./source/ap/vim/patches/7.2.210 +gzip ./source/ap/vim/patches/7.2.336 +gzip ./source/ap/vim/patches/7.2.253 +gzip ./source/ap/vim/patches/7.2.359 gzip ./source/ap/vim/patches/7.2.148 +gzip ./source/ap/vim/patches/7.2.286 gzip ./source/ap/vim/patches/7.2.133 gzip ./source/ap/vim/patches/7.2.011 +gzip ./source/ap/vim/patches/7.2.416 gzip ./source/ap/vim/patches/7.2.008 gzip ./source/ap/vim/patches/7.2.174 +gzip ./source/ap/vim/patches/7.2.339 gzip ./source/ap/vim/patches/7.2.161 +gzip ./source/ap/vim/patches/7.2.315 gzip ./source/ap/vim/patches/7.2.177 gzip ./source/ap/vim/patches/7.2.002 +gzip ./source/ap/vim/patches/7.2.287 gzip ./source/ap/vim/patches/7.2.084 gzip ./source/ap/vim/patches/7.2.036 +gzip ./source/ap/vim/patches/7.2.332 gzip ./source/ap/vim/patches/7.2.202 gzip ./source/ap/vim/patches/7.2.231 gzip ./source/ap/vim/patches/7.2.014 gzip ./source/ap/vim/patches/7.2.027 +gzip ./source/ap/vim/patches/7.2.313 gzip ./source/ap/vim/patches/7.2.155 +gzip ./source/ap/vim/patches/7.2.302 +gzip ./source/ap/vim/vim-runtime-syntax-20100510.diff gzip ./source/ap/vim/vim.vimrc.diff gzip ./source/ap/vim/doinst.sh gzip ./source/ap/a2ps/a2ps.diff @@ -670,8 +839,8 @@ gzip ./source/ap/a2ps/psutils.diff gzip ./source/ap/a2ps/a2ps.a2ps_cfg.in.diff gzip ./source/ap/lm_sensors/lm_sensors.makefile.diff gzip ./source/d/autoconf/doinst.sh -gzip ./source/d/ruby/ruby.x86_64.diff -gzip ./source/d/doxygen/doxygen.qt4.diff +gzip ./source/d/oprofile/oprofile.qt4.diff +gzip ./source/d/mercurial/doinst.sh gzip ./source/d/libtool/libtool.no.moved.warning.diff gzip ./source/d/libtool/doinst.sh gzip ./source/d/rcs/rcs-5.7.diff @@ -690,35 +859,39 @@ gzip ./source/d/p2c/p2c_1.21alpha2-2.1.diff gzip ./source/d/p2c/p2c.examples.diff gzip ./source/d/p2c/p2c_time.diff gzip ./source/d/perl/perl.configure.multilib.patch -gzip ./source/d/perl/doinst.sh gzip ./source/xap/rxvt/rxvt.utempter.diff gzip ./source/xap/xmms/xmms.gtk.doublesize.diff gzip ./source/xap/xmms/xmms.wmxmms_vis_depth_workaround.diff gzip ./source/xap/gxine/gxine.desktop gzip ./source/xap/gftp/gftp.desktop -gzip ./source/xap/xfce/patches/exo_quoting_fix.diff -gzip ./source/xap/xfce/patches/migrate-itheme-smartly.diff +gzip ./source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff +gzip ./source/xap/xfce/patches/xfce4-settings.libxklavier5.diff gzip ./source/xap/xfce/patches/xfdesktop-fix_education_icon.diff gzip ./source/xap/xfce/patches/xfcalendar.desktop.in.diff -gzip ./source/xap/xfce/patches/launcher-plugin-migrate-icon-cat.diff -gzip ./source/xap/xfce/patches/terminal-0.4.0-fixup_docdir.diff +gzip ./source/xap/xfce/patches/thunar-1.0.1-png14.diff +gzip ./source/xap/xfce/patches/thunar-fix_umask_properly.diff gzip ./source/xap/xfce/patches/thunar-1.0.1-fixup_docdir.diff +gzip ./source/xap/xfce/patches/terminal.gtk.2.18.fix.diff +gzip ./source/xap/xfce4-notifyd/doinst.sh gzip ./source/xap/fluxbox/xinitrc.fluxbox -gzip ./source/xap/mozilla-thunderbird/mozilla-thunderbird-firefox.diff +gzip ./source/xap/gimp/gimp.png14.diff +gzip ./source/xap/mozilla-thunderbird/mimeTypes.rdf gzip ./source/xap/xine-ui/xine.desktop +gzip ./source/xap/xine-ui/xine-ui.png14.diff gzip ./source/xap/xfce4-power-manager/doinst.sh -gzip ./source/xap/xpaint/xpaint_2.7.8.1-1.2.diff -gzip ./source/xap/xpaint/xpaint_xaw3d_no_scroll_mode.diff +gzip ./source/xap/geeqie/doinst.sh gzip ./source/xap/xchat/patches/xc286-smallfixes.diff gzip ./source/xap/xchat/patches/xchat.gtk_2_14.diff gzip ./source/xap/gkrellm/gkrellm.theme.defaults.diff gzip ./source/xap/x3270/doinst.sh gzip ./source/xap/xxgdb/xxgdb.fix_glibc_and_gcc.diff +gzip ./source/xap/blackbox/blackbox-0.70.1-gcc-4.3.patch gzip ./source/xap/blackbox/xinitrc.blackbox -gzip ./source/xap/blackbox/blackbox_0.65.0-5.diff gzip ./source/xap/windowmaker/windowmaker.no-mmx.diff +gzip ./source/xap/windowmaker/windowmaker.png.1.4.0.diff gzip ./source/xap/windowmaker/wmaker.inst.diff -gzip ./source/xap/audacious/audacious.handle_cmd_line_options.diff +gzip ./source/xap/windowmaker/xinitrc.wmaker +gzip ./source/xap/audacious/doinst.sh gzip ./source/xap/electricsheep/electricsheep.mplayer.diff gzip ./source/xap/gucharmap/doinst.sh gzip ./source/xap/pidgin/purple-allow-sign-rsa-md5.patch @@ -731,65 +904,75 @@ gzip ./source/xap/xgames/xlander.fixes.diff gzip ./source/xap/xscreensaver/setuid.c gzip ./source/xap/xscreensaver/xscreensaver.setuid.diff gzip ./source/xap/xscreensaver/xscreensaver.electricsheep.diff +gzip ./source/xap/sane/sane-frontends-1.0.14-sane_cap_always_settable.diff gzip ./source/xap/sane/doinst.sh gzip ./source/xap/sane/dll.conf.additions -gzip ./source/xap/seamonkey/seamonkey.moz_plugin_path.diff +gzip ./source/xap/pan/pan.gcc44.diff +gzip ./source/xap/pan/pan.gmime2.4.diff gzip ./source/xap/seamonkey/doinst.sh -gzip ./source/xap/gnuchess/xboard.buffer_overflow_fix.diff gzip ./source/xap/gnuchess/gnuchess.gcc4_fix.diff +gzip ./source/xap/gnuchess/eboard.assert.diff +gzip ./source/xap/gnuchess/gnuchess.getline.glibc.diff gzip ./source/xap/gnuchess/gnuchess.SlackBuild.diff -gzip ./source/xap/gnuchess/xboard.infodir.diff -gzip ./source/xap/audacious-plugins/amidi-plug.fix-drct.diff -gzip ./source/xap/audacious-plugins/audacious-plugins.libmtp8.diff -gzip ./source/xap/xpdf/xpdf-resizefix.diff -gzip ./source/xap/xpdf/xpdfrc.diff -gzip ./source/xap/xpdf/xpdf-hebrew.diff -gzip ./source/xap/xpdf/xpdf_3.02-1.3.diff -gzip ./source/xap/xpdf/xpdf-thai.diff -gzip ./source/xap/xpdf/xpdf-korean.diff -gzip ./source/xap/xpdf/xpdf-chinese-traditional.diff -gzip ./source/xap/xpdf/xpdf-greek.diff -gzip ./source/xap/xpdf/xpdf-chinese-simplified.diff -gzip ./source/xap/xpdf/xpdf-turkish.diff -gzip ./source/xap/xpdf/xpdf-arabic.diff -gzip ./source/xap/xpdf/xpdf-japanese.diff -gzip ./source/xap/xpdf/xpdf-cyrillic.diff -gzip ./source/xap/xpdf/xpdf-latin2.diff +gzip ./source/xap/xine-lib/xine-lib-1.1.17.ff.diff +gzip ./source/xap/blueman/blueman-use_blueman-open_for_obexfs.diff +gzip ./source/xap/blueman/doinst.sh +gzip ./source/xap/blueman/no_hide_applet.diff +gzip ./source/xap/blueman/fix_on_off_loop.diff +gzip ./source/xap/xpdf/patches/xpdf-resizefix.diff +gzip ./source/xap/xpdf/patches/xpdfrc.diff +gzip ./source/xap/xpdf/patches/xpdf_3.02-1.3.diff +gzip ./source/xap/xpdf/doinst.sh +gzip ./source/xap/xpdf/lang/xpdf-hebrew.diff +gzip ./source/xap/xpdf/lang/xpdf-thai.diff +gzip ./source/xap/xpdf/lang/xpdf-korean.diff +gzip ./source/xap/xpdf/lang/xpdf-chinese-traditional.diff +gzip ./source/xap/xpdf/lang/xpdf-greek.diff +gzip ./source/xap/xpdf/lang/xpdf-chinese-simplified.diff +gzip ./source/xap/xpdf/lang/xpdf-turkish.diff +gzip ./source/xap/xpdf/lang/xpdf-arabic.diff +gzip ./source/xap/xpdf/lang/xpdf-japanese.diff +gzip ./source/xap/xpdf/lang/xpdf-cyrillic.diff +gzip ./source/xap/xpdf/lang/xpdf-latin2.diff gzip ./source/xap/seyon/seyon_2.20c-16.diff gzip ./source/xap/xlockmore/xlockmore.bitmap.diff gzip ./source/xap/fvwm/xinitrc.fvwm2 gzip ./source/xap/fvwm/fvwm.colormap.diff gzip ./source/xap/fvwm/doinst.sh gzip ./source/xap/fvwm/system.fvwm2rc +gzip ./source/xap/xv/xv.jasper.diff gzip ./source/xap/xv/xv.prefix_x86_64.diff gzip ./source/xap/xv/xv.prefix.diff gzip ./source/xap/xv/xv-3.10a.patch gzip ./source/xap/mozilla-firefox/mozilla-firefox-mimeTypes-fix.diff gzip ./source/xap/mozilla-firefox/firefox.moz_plugin_path.diff gzip ./source/xap/mozilla-firefox/mimeTypes.rdf -gzip ./source/xap/gqview/doinst.sh gzip ./source/x/x11-skel/doinst.sh gzip ./source/x/xaw3d/Xaw3d-1.5-debian-fixes.diff gzip ./source/x/xaw3d/Xaw3d-1.5E.diff gzip ./source/x/x11/post-install/xorg-cf-files/x11.tmpl.lib64.kludge.diff +gzip ./source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff gzip ./source/x/x11/patch/xorg-server/x11.startwithblackscreen.diff -gzip ./source/x/x11/patch/xscope/xscope-1.1-scope.c.diff -gzip ./source/x/x11/patch/compiz/compiz-0.7.8-kde42-krunner.patch -gzip ./source/x/x11/patch/compiz/compiz-0.7.8-kde42-crash.patch -gzip ./source/x/x11/patch/compiz/compiz-0.7.8-kde42.patch +gzip ./source/x/x11/patch/xf86-input-synaptics/xf86-input-synaptics.tap-to-click.diff +gzip ./source/x/x11/patch/xcursorgen/xcursorgen.png14.configure.kludge.diff gzip ./source/x/ttf-indic-fonts/ttf-indic-fonts.copyright.diff gzip ./source/x/ttf-indic-fonts/doinst.sh gzip ./source/x/scim-hangul/scim-hangul.gcc43.diff gzip ./source/x/xdg-utils/doinst.sh gzip ./source/x/liberation-fonts-ttf/doinst.sh +gzip ./source/x/libdrm/libdrm.uint32_t.diff gzip ./source/x/scim-anthy/scim-anthy.gcc43.diff gzip ./source/x/dejavu-fonts-ttf/doinst.sh gzip ./source/x/fontconfig/fontconfig.dejavu.diff +gzip ./source/x/fontconfig/doinst.sh gzip ./source/x/fontconfig/fontconfig.font.dir.list.diff gzip ./source/x/scim-pinyin/scim-pinyin.gcc43.diff +gzip ./source/t/transfig/transfig.png14.nodither.diff gzip ./source/t/transfig/transfig.diff gzip ./source/t/transfig/transfig.3.2.4-gcc4.patch gzip ./source/t/tetex/tetex.dvipdfm.mkstemp.diff +gzip ./source/t/tetex/tetex.png14.diff +gzip ./source/t/tetex/tetex.cpascal.getline.posix.2008.diff gzip ./source/t/tetex/tetex.fontcachedirinhome.diff gzip ./source/t/tetex/tetex.etex.diff gzip ./source/t/tetex/tetex.tmp.cleanup.diff @@ -798,6 +981,9 @@ gzip ./source/t/tetex/tetex.browsers.diff gzip ./source/t/tetex/tetex.scripts.mktemp.diff gzip ./source/t/tetex/tetex.var.fonts.diff gzip ./source/t/tetex/tetex.CVE-2005-3193.diff +gzip ./source/t/tetex/tetex.afm2tfm.getline.diff +gzip ./source/t/tetex/tetex.leet.diff +gzip ./source/t/xfig/xfig.png14.nodither.diff gzip ./source/t/xfig/xfig.3.2.4-null.diff gzip ./source/t/xfig/xfig-3.2.4-mkstemp.diff gzip ./source/t/xfig/xfig.3.2.3d-international-std-fonts.diff @@ -812,6 +998,7 @@ gzip ./source/t/xfig/xfig.3.2.3d-xim.diff gzip ./source/t/xfig/xfig.3.2.4-locale.diff gzip ./source/t/xfig/xfig.3.2.4.diff gzip ./source/t/xfig/xfig.3.2.4-urw-fonts.diff +gzip ./source/y/bsd-games/bsd-games.getline.diff gzip ./source/y/bsd-games/bsd-games.ospeed.diff gzip ./source/y/bsd-games/bsd-games.config.params.diff gzip ./source/y/bsd-games/bsd-games.strfile.8.diff @@ -824,59 +1011,66 @@ gzip ./source/y/bsd-games/bsd-games.fortunepath.diff gzip ./source/kde/kdeutils/doinst.sh gzip ./source/kde/kdemultimedia/doinst.sh gzip ./source/kde/kdeadmin/doinst.sh -gzip ./source/kde/k3b/k3b.internal.libsamplerate.diff +gzip ./source/kde/kdeadmin/knetworkconf.diff gzip ./source/kde/k3b/doinst.sh gzip ./source/kde/kdeartwork/doinst.sh gzip ./source/kde/amarok/doinst.sh -gzip ./source/kde/amarok/amarok.qtscript.optional.diff gzip ./source/kde/ktorrent/doinst.sh +gzip ./source/kde/kdepim-runtime/doinst.sh gzip ./source/kde/kaudiocreator/doinst.sh -gzip ./source/kde/kdenetwork/kopete-r986796.diff +gzip ./source/kde/kdenetwork/kget.kde44.CVE-2010-1000-1511.diff gzip ./source/kde/kdenetwork/doinst.sh -gzip ./source/kde/kdebase-runtime/kdebase-runtime-text-render-969192.diff +gzip ./source/kde/kdebindings/kdebindings-ruby-env.h.diff +gzip ./source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff +gzip ./source/kde/kdebindings/kdebindings-rubyconfig.h.diff gzip ./source/kde/kdebase-runtime/doinst.sh +gzip ./source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff gzip ./source/kde/kdebase-workspace/doinst.sh gzip ./source/kde/kdetoys/doinst.sh +gzip ./source/kde/kdewebdev/include-tidy.patch gzip ./source/kde/kdewebdev/doinst.sh gzip ./source/kde/kdewebdev/kde4-kdewebdev-findtidy.diff gzip ./source/kde/kdepim/doinst.sh gzip ./source/kde/kdeedu/doinst.sh gzip ./source/kde/kdeaccessibility/doinst.sh gzip ./source/kde/kdeplasma-addons/doinst.sh +gzip ./source/kde/kdegraphics/kdegraphics.gwenview.jpeg8.diff gzip ./source/kde/kdegraphics/doinst.sh gzip ./source/kde/kdebase/doinst.sh gzip ./source/kde/skanlite/doinst.sh +gzip ./source/kde/koffice/koffice.krita.png14.diff gzip ./source/kde/koffice/doinst.sh gzip ./source/kde/kdegames/doinst.sh gzip ./source/kde/kdevplatform/doinst.sh gzip ./source/kde/kdevelop/doinst.sh gzip ./source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch gzip ./source/kde/kdelibs/doinst.sh -gzip ./source/kde/kdelibs/fixPopupForPlasmaboard.diff gzip ./source/kde/kdesdk/doinst.sh +gzip ./source/kde/kopete-cryptography/doinst.sh +gzip ./source/e/emacs/doinst.sh gzip ./source/tcl/tix/tix.soname.patch gzip ./source/tcl/tix/tix.tcl8.5.patch gzip ./source/tcl/expect/expect.exp_main_tk.c.version.require.diff gzip ./source/tcl/hfsutils/hfsutils.errno.diff gzip ./source/tcl/tclx/tclx-8.4.configure.diff gzip ./source/tcl/tclx/tclx-8.4.gcc4.diff -gzip ./source/l/hal/patches/ignore_dupe_add_events.diff -gzip ./source/l/hal/patches/allow_uid_gid_ntfs.diff -gzip ./source/l/hal/patches/fix_led_crash.diff -gzip ./source/l/hal/patches/fix_segfault_in_mdraid.diff -gzip ./source/l/hal/patches/fixup_udi_strings.diff +gzip ./source/l/hal/patches/fix_libusb_detection.diff +gzip ./source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff gzip ./source/l/hal/patches/10-keymap.fdi-restore_zap.diff -gzip ./source/l/hal/patches/regen_fdi_cache_if_zero_size.diff -gzip ./source/l/hal/patches/set_X_keymap_properly.diff -gzip ./source/l/hal/patches/hide_more_invalid_partitions.diff -gzip ./source/l/hal/patches/check_udi_properly.diff -gzip ./source/l/hal/patches/use_udevadm_not_udevinfo.patch -gzip ./source/l/hal/patches/fix_md_crash.diff +gzip ./source/l/hal/patches/fix_ioperm_arguments.patch +gzip ./source/l/hal/patches/handle_input.touchpad_explicitly.diff +gzip ./source/l/hal/patches/fix_segfault-dbus_error_init.patch +gzip ./source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff gzip ./source/l/hal/hal.conf gzip ./source/l/hal/doinst.sh gzip ./source/l/hal/rc.hald gzip ./source/l/ncurses/ncurses.mkhashsize.diff gzip ./source/l/shared-mime-info/doinst.sh +gzip ./source/l/loudmouth/loudmouth.async_assertion.diff +gzip ./source/l/loudmouth/loudmouth.gnutls.configure.ac.diff +gzip ./source/l/loudmouth/loudmouth.stanzadrop.diff +gzip ./source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff +gzip ./source/l/loudmouth/loudmouth.crtpath.diff gzip ./source/l/db42/patch.4.2.52.2 gzip ./source/l/db42/patch.4.2.52.1 gzip ./source/l/db42/patch.4.2.52.4 @@ -885,14 +1079,13 @@ gzip ./source/l/hicolor-icon-theme/doinst.sh gzip ./source/l/svgalib/svgalib.nohelper.diff gzip ./source/l/svgalib/svgalib-1.9.25-kernel-2.6.26.diff gzip ./source/l/svgalib/svgalib.prefix.diff +gzip ./source/l/cairo/cairo.libpng14.diff gzip ./source/l/urwid/LICENSE gzip ./source/l/djvulibre/doinst.sh -gzip ./source/l/glib2/glib-CVE-2008-4316.diff +gzip ./source/l/gd/gd.png14.diff gzip ./source/l/glib2/doinst.sh -gzip ./source/l/sdl/SDL_mixer-1.2.8.usrlocal.diff +gzip ./source/l/sdl/SDL_mixer.usrlocal.diff gzip ./source/l/parted/parted.configure.diff -gzip ./source/l/libtiff/tiff-3.8.2.goo-sec.diff -gzip ./source/l/libtiff/tiff-3.8.2.tiffsplit.commandline.overflow.diff gzip ./source/l/glibc/glibc-2.10-dns-no-gethostbyname4.diff gzip ./source/l/glibc/glibc.ru_RU.CP1251.diff gzip ./source/l/glibc/glibc.nis-netgroups.diff @@ -905,45 +1098,63 @@ gzip ./source/l/qt/qt.x86.cflags.diff gzip ./source/l/qt/qt.mysql.h.diff gzip ./source/l/qt/doinst.sh gzip ./source/l/librsvg/librsvg_seamonkey-config.diff -gzip ./source/l/netpbm/Makefile.config +gzip ./source/l/system-config-printer/doinst.sh +gzip ./source/l/netpbm/config.mk +gzip ./source/l/polkit-gnome/pkga.desktop-NotShowInKDE.diff +gzip ./source/l/PyQt/PyQt.phonon.diff +gzip ./source/l/mpfr/patches/patch01 +gzip ./source/l/mpfr/patches/patch02 +gzip ./source/l/mpfr/patches/patch03 +gzip ./source/l/libwmf/libwmf.png14.diff gzip ./source/l/esound/doinst.sh gzip ./source/l/qtscriptgenerator/include-everything.patch +gzip ./source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff gzip ./source/l/libtermcap/termcap.h.diff gzip ./source/l/libtermcap/termcap-compat_1.2.3.diff gzip ./source/l/libtermcap/termcap.bufsize.diff +gzip ./source/l/babl/babl-0.1.0-build-fixes.patch gzip ./source/l/openexr/openexr.gcc43.diff -gzip ./source/l/lesstif/lesstif.gcc42.diff gzip ./source/l/lesstif/lesstif.x86_64.patch gzip ./source/l/lesstif/lesstif.rendertable.check.diff gzip ./source/l/lesstif/lesstif.Makefile.in.patch gzip ./source/l/lesstif/doinst.sh gzip ./source/l/lesstif/lesstif.PutPixel32.patch gzip ./source/l/imlib/imlib.mitshm.render.diff -gzip ./source/l/libjpeg/jpeg-6b.diff -gzip ./source/l/gtk+2/gtk.nsplugin.diff gzip ./source/l/gtk+2/gtk.pnglz.diff +gzip ./source/l/gtk+2/gtk.png14.diff gzip ./source/l/gtk+2/doinst.sh +gzip ./source/l/gtk+2/gtk.xid.nowarningflood.diff +gzip ./source/l/pilot-link/pilot-link.png14.diff gzip ./source/l/libnl/libnl-include_limits.h.patch +gzip ./source/l/hal-info/patches/quirk-LG_X110-keyboard.patch +gzip ./source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch gzip ./source/l/pango/pango.etc.host.location.diff +gzip ./source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff gzip ./source/l/desktop-file-utils/doinst.sh gzip ./source/l/db44/patch.4.4.20.2 gzip ./source/l/db44/patch.4.4.20.1 gzip ./source/l/libcap/libcap.capability.h.fix.broken.includes.diff +gzip ./source/l/ConsoleKit/patches/consolekit-0.2.10-cleanup_console_tags.patch +gzip ./source/l/ConsoleKit/patches/consolekit-dbus-permissions.patch +gzip ./source/l/ConsoleKit/patches/consolekit-skipvalidation.patch +gzip ./source/l/ConsoleKit/doinst.sh gzip ./source/l/freetype/freetype.bytecode.interpreter.diff gzip ./source/l/freetype/freetype.illadvisederror.diff gzip ./source/l/freetype/freetype.subpixel.rendering.diff gzip ./source/l/qca-ossl/qca-ossl.nowhirlpool.diff gzip ./source/l/akonadi/doinst.sh -gzip ./source/l/boost/boost.ifdef_placement.diff gzip ./source/l/icon-naming-utils/icon-naming-utils.pkgconfigdir.diff +gzip ./source/l/phonon/phonon.gstreamer.qt-4.5.1.diff gzip ./source/l/fuse/doinst.sh gzip ./source/l/gnome-icon-theme/doinst.sh gzip ./source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff -gzip ./source/l/libpng/libpng.libs.diff +gzip ./source/l/virtuoso-ose/doinst.sh gzip ./source/l/libexif/libexif.pc.diff bzip2 ./source/n/curl/cacert.pem -bzip2 ./source/xap/xv/xv-3.10a-jumbo-enh-patch-20050501.txt -bzip2 ./source/xap/xv/xv-3.10a-jumbo-fix-patch-20050410.txt +bzip2 ./source/ap/linuxdoc-tools/sources/gtkdoc-1.13-fixref.patch +bzip2 ./source/xap/xv/xv-3.10a-enhancements.20070520-20081216.diff +bzip2 ./source/xap/xv/xv-3.10a-jumbo-fix-enh-patch-20070520.txt +bzip2 ./source/xap/xv/xv-3.10a-jumbo-additions.diff bzip2 ./source/x/ttf-indic-fonts/Samyak_Malayalam.ttf bzip2 ./source/x/ttf-indic-fonts/COPYING bzip2 ./source/l/gtk+/gtk+1.2_1.2.10-18.diff diff --git a/slackware64/a/maketag b/slackware64/a/maketag index 8303cae05..6ec55425b 100644 --- a/slackware64/a/maketag +++ b/slackware64/a/maketag @@ -23,12 +23,12 @@ system. :^) Press ENTER when you are done." 21 76 10 \ "bzip2" "bzip2 compression utility" "on" \ "coreutils" "The core GNU command-line utilities - REQUIRED" "on" \ "cpio" "The GNU cpio backup/archiving utility" "on" \ +"cpufrequtils" "Kernel CPUfreq utilities" "on" \ "cryptsetup" "Utilities for encrypting partitions" "on" \ "cups" "CUPS - printer spooling system" "on" \ "cxxlibs" "C++ shared libraries - REQUIRED" "on" \ "dbus" "Message bus daemon" "on" \ "dcron" "Cron daemon - REQUIRED" "on" \ -"device-mapper" "The device-mapper is used with LVM" "on" \ "devs" "Device files found in /dev - REQUIRED" "on" \ "dialog" "The program that generates these menus :-)" "on" \ "dosfstools" "Tools for working with FAT filesystems" "on" \ @@ -54,10 +54,10 @@ system. :^) Press ENTER when you are done." 21 76 10 \ "inotify-tools" "Command-line tools for using inotify." "on" \ "jfsutils" "Utilities for IBM's Journaled Filesystem" "on" \ "kbd" "Change keyboard and console mappings" "on" \ -"kernel-firmware" "Linux 2.6.29.6 kernel firmware -- REQUIRED" "on" \ -"kernel-generic" "Generic 2.6.29.6 kernel (needs an initrd)" "on" \ -"kernel-huge" "Loaded 2.6.29.6 Linux kernel" "on" \ -"kernel-modules" "Linux 2.6.29.6 kernel modules -- REQUIRED" "on" \ +"kernel-firmware" "Linux 2.6.33.4 kernel firmware -- REQUIRED" "on" \ +"kernel-generic" "Generic 2.6.33.4 kernel (needs an initrd)" "on" \ +"kernel-huge" "Loaded 2.6.33.4 Linux kernel" "on" \ +"kernel-modules" "Linux 2.6.33.4 kernel modules -- REQUIRED" "on" \ "less" "A text pager utility - REQUIRED" "on" \ "lha" "LHA archive utility" "on" \ "lilo" "Boot loader for Linux, DOS, OS/2, etc." "on" \ @@ -99,6 +99,7 @@ system. :^) Press ENTER when you are done." 21 76 10 \ "tree" "Display a directory in tree form" "on" \ "udev" "System for managing /dev in 2.6 - RECOMMENDED" "on" \ "unarj" "Extract ARJ archives" "on" \ +"usb_modeswitch" "Switching tool for multiple mode USB devices" "on" \ "usbutils" "Linux USB utilities" "on" \ "utempter" "Library used for writing to utmp/wtmp" "on" \ "util-linux-ng" "Util-linux utilities - REQUIRED" "on" \ @@ -111,7 +112,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils cpio cryptsetup cups cxxlibs dbus dcron device-mapper devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha lilo logrotate lvm2 mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usbutils utempter util-linux-ng which xfsprogs xz zoo \ +aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha lilo logrotate lvm2 mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usb_modeswitch usbutils utempter util-linux-ng which xfsprogs xz zoo \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -119,7 +120,7 @@ aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils c fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils cpio cryptsetup cups cxxlibs dbus dcron device-mapper devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha lilo logrotate lvm2 mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usbutils utempter util-linux-ng which xfsprogs xz zoo \ +aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha lilo logrotate lvm2 mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usb_modeswitch usbutils utempter util-linux-ng which xfsprogs xz zoo \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/a/maketag.ez b/slackware64/a/maketag.ez index 8303cae05..6ec55425b 100644 --- a/slackware64/a/maketag.ez +++ b/slackware64/a/maketag.ez @@ -23,12 +23,12 @@ system. :^) Press ENTER when you are done." 21 76 10 \ "bzip2" "bzip2 compression utility" "on" \ "coreutils" "The core GNU command-line utilities - REQUIRED" "on" \ "cpio" "The GNU cpio backup/archiving utility" "on" \ +"cpufrequtils" "Kernel CPUfreq utilities" "on" \ "cryptsetup" "Utilities for encrypting partitions" "on" \ "cups" "CUPS - printer spooling system" "on" \ "cxxlibs" "C++ shared libraries - REQUIRED" "on" \ "dbus" "Message bus daemon" "on" \ "dcron" "Cron daemon - REQUIRED" "on" \ -"device-mapper" "The device-mapper is used with LVM" "on" \ "devs" "Device files found in /dev - REQUIRED" "on" \ "dialog" "The program that generates these menus :-)" "on" \ "dosfstools" "Tools for working with FAT filesystems" "on" \ @@ -54,10 +54,10 @@ system. :^) Press ENTER when you are done." 21 76 10 \ "inotify-tools" "Command-line tools for using inotify." "on" \ "jfsutils" "Utilities for IBM's Journaled Filesystem" "on" \ "kbd" "Change keyboard and console mappings" "on" \ -"kernel-firmware" "Linux 2.6.29.6 kernel firmware -- REQUIRED" "on" \ -"kernel-generic" "Generic 2.6.29.6 kernel (needs an initrd)" "on" \ -"kernel-huge" "Loaded 2.6.29.6 Linux kernel" "on" \ -"kernel-modules" "Linux 2.6.29.6 kernel modules -- REQUIRED" "on" \ +"kernel-firmware" "Linux 2.6.33.4 kernel firmware -- REQUIRED" "on" \ +"kernel-generic" "Generic 2.6.33.4 kernel (needs an initrd)" "on" \ +"kernel-huge" "Loaded 2.6.33.4 Linux kernel" "on" \ +"kernel-modules" "Linux 2.6.33.4 kernel modules -- REQUIRED" "on" \ "less" "A text pager utility - REQUIRED" "on" \ "lha" "LHA archive utility" "on" \ "lilo" "Boot loader for Linux, DOS, OS/2, etc." "on" \ @@ -99,6 +99,7 @@ system. :^) Press ENTER when you are done." 21 76 10 \ "tree" "Display a directory in tree form" "on" \ "udev" "System for managing /dev in 2.6 - RECOMMENDED" "on" \ "unarj" "Extract ARJ archives" "on" \ +"usb_modeswitch" "Switching tool for multiple mode USB devices" "on" \ "usbutils" "Linux USB utilities" "on" \ "utempter" "Library used for writing to utmp/wtmp" "on" \ "util-linux-ng" "Util-linux utilities - REQUIRED" "on" \ @@ -111,7 +112,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils cpio cryptsetup cups cxxlibs dbus dcron device-mapper devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha lilo logrotate lvm2 mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usbutils utempter util-linux-ng which xfsprogs xz zoo \ +aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha lilo logrotate lvm2 mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usb_modeswitch usbutils utempter util-linux-ng which xfsprogs xz zoo \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -119,7 +120,7 @@ aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils c fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils cpio cryptsetup cups cxxlibs dbus dcron device-mapper devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha lilo logrotate lvm2 mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usbutils utempter util-linux-ng which xfsprogs xz zoo \ +aaa_base aaa_elflibs aaa_terminfo acl acpid apmd attr bash bin bzip2 coreutils cpio cpufrequtils cryptsetup cups cxxlibs dbus dcron devs dialog dosfstools e2fsprogs ed eject elvis etc file findutils floppy gawk genpower gettext getty-ps glibc-solibs glibc-zoneinfo gpm grep gzip hdparm infozip inotify-tools jfsutils kbd kernel-firmware kernel-generic kernel-huge kernel-modules less lha lilo logrotate lvm2 mdadm minicom mkinitrd module-init-tools mt-st mtx ncompress ntfs-3g openssl-solibs patch pciutils pcmciautils pkgtools procps quota reiserfsprogs rpm2tgz sdparm sed shadow sharutils slocate smartmontools splitvt sysfsutils sysklogd syslinux sysvinit sysvinit-functions sysvinit-scripts tar tcsh time tree udev unarj usb_modeswitch usbutils utempter util-linux-ng which xfsprogs xz zoo \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/a/tagfile b/slackware64/a/tagfile index 392da1947..2e679f7c0 100644 --- a/slackware64/a/tagfile +++ b/slackware64/a/tagfile @@ -10,12 +10,12 @@ bin:ADD bzip2:ADD coreutils:ADD cpio:ADD +cpufrequtils:OPT cryptsetup:OPT cups:REC cxxlibs:ADD dbus:REC dcron:ADD -device-mapper:REC devs:ADD dialog:REC dosfstools:REC @@ -86,6 +86,7 @@ time:REC tree:REC udev:ADD unarj:REC +usb_modeswitch:ADD usbutils:ADD utempter:REC util-linux-ng:ADD diff --git a/slackware64/ap/maketag b/slackware64/ap/maketag index f6a5c26d0..9f9d8e978 100644 --- a/slackware64/ap/maketag +++ b/slackware64/ap/maketag @@ -23,7 +23,6 @@ done." 22 72 12 \ "cdparanoia" "Cdparanoia CD audio ripper" "on" \ "cdrdao" "Tool for burning audio CDRs" "on" \ "cdrtools" "CD-R/RW mastering/burning tools" "on" \ -"cupsddk" "CUPS Driver Development Kit" "on" \ "dc3dd" "Enhanced dd for computer forensics" "on" \ "diffstat" "Generate diff statistics" "on" \ "diffutils" "GNU diffutils - find file differences" "on" \ @@ -54,12 +53,13 @@ done." 22 72 12 \ "man-pages" "Online documentation (requires groff)" "on" \ "mc" "The Midnight Commander file manager" "on" \ "most" "A pager, like 'more' or 'less'" "on" \ -"mpg321" "A command-line MP3 player" "on" \ +"mpg123" "A command-line MP3 player" "on" \ "mysql" "MySQL database server" "on" \ "nano" "A simple editor with the look and feel of Pico" "on" \ "normalize" "Normalize audio file volume" "on" \ "ntfsprogs" "Utilities for the NTFS filesystem" "on" \ "pm-utils" "Power management utilities" "on" \ +"powertop" "PowerTOP system energy usage utility" "on" \ "radeontool" "Utility for laptops with a Radeon chipset" "on" \ "rexima" "Small console audio mixer" "on" \ "rpm" "RPM package tool (unsupported)" "on" \ @@ -84,7 +84,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools cupsddk dc3dd diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi madplay man man-pages mc most mpg321 mysql nano normalize ntfsprogs pm-utils radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \ +a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi madplay man man-pages mc most mpg123 mysql nano normalize ntfsprogs pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -92,7 +92,7 @@ a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools cupsddk fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools cupsddk dc3dd diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi madplay man man-pages mc most mpg321 mysql nano normalize ntfsprogs pm-utils radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \ +a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi madplay man man-pages mc most mpg123 mysql nano normalize ntfsprogs pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/ap/maketag.ez b/slackware64/ap/maketag.ez index f6a5c26d0..9f9d8e978 100644 --- a/slackware64/ap/maketag.ez +++ b/slackware64/ap/maketag.ez @@ -23,7 +23,6 @@ done." 22 72 12 \ "cdparanoia" "Cdparanoia CD audio ripper" "on" \ "cdrdao" "Tool for burning audio CDRs" "on" \ "cdrtools" "CD-R/RW mastering/burning tools" "on" \ -"cupsddk" "CUPS Driver Development Kit" "on" \ "dc3dd" "Enhanced dd for computer forensics" "on" \ "diffstat" "Generate diff statistics" "on" \ "diffutils" "GNU diffutils - find file differences" "on" \ @@ -54,12 +53,13 @@ done." 22 72 12 \ "man-pages" "Online documentation (requires groff)" "on" \ "mc" "The Midnight Commander file manager" "on" \ "most" "A pager, like 'more' or 'less'" "on" \ -"mpg321" "A command-line MP3 player" "on" \ +"mpg123" "A command-line MP3 player" "on" \ "mysql" "MySQL database server" "on" \ "nano" "A simple editor with the look and feel of Pico" "on" \ "normalize" "Normalize audio file volume" "on" \ "ntfsprogs" "Utilities for the NTFS filesystem" "on" \ "pm-utils" "Power management utilities" "on" \ +"powertop" "PowerTOP system energy usage utility" "on" \ "radeontool" "Utility for laptops with a Radeon chipset" "on" \ "rexima" "Small console audio mixer" "on" \ "rpm" "RPM package tool (unsupported)" "on" \ @@ -84,7 +84,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools cupsddk dc3dd diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi madplay man man-pages mc most mpg321 mysql nano normalize ntfsprogs pm-utils radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \ +a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi madplay man man-pages mc most mpg123 mysql nano normalize ntfsprogs pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -92,7 +92,7 @@ a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools cupsddk fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools cupsddk dc3dd diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi madplay man man-pages mc most mpg321 mysql nano normalize ntfsprogs pm-utils radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \ +a2ps acct alsa-utils amp ash at aumix bc bpe cdparanoia cdrdao cdrtools dc3dd diffstat diffutils dmapi dmidecode dvd+rw-tools enscript flac foomatic-filters ghostscript ghostscript-fonts-std gphoto2 groff gutenprint hplip ispell jed joe jove ksh93 libx86 linuxdoc-tools lm_sensors lsof lsscsi madplay man man-pages mc most mpg123 mysql nano normalize ntfsprogs pm-utils powertop radeontool rexima rpm rzip sc screen seejpeg slackpkg sox sqlite sudo sysstat texinfo vbetool vim vorbis-tools workbone xfsdump zsh \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/ap/tagfile b/slackware64/ap/tagfile index 0ce719451..348135f44 100644 --- a/slackware64/ap/tagfile +++ b/slackware64/ap/tagfile @@ -10,7 +10,6 @@ bpe:OPT cdparanoia:OPT cdrdao:OPT cdrtools:OPT -cupsddk:REC dc3dd:OPT diffstat:REC diffutils:REC @@ -41,12 +40,13 @@ man:ADD man-pages:REC mc:OPT most:OPT -mpg321:OPT +mpg123:OPT mysql:OPT nano:REC normalize:OPT ntfsprogs:OPT pm-utils:OPT +powertop:OPT radeontool:REC rexima:REC rpm:OPT diff --git a/slackware64/e/maketag b/slackware64/e/maketag index 009f9b39b..ea5da8bb8 100644 --- a/slackware64/e/maketag +++ b/slackware64/e/maketag @@ -11,7 +11,7 @@ from series E. Use the UP/DOWN keys to scroll through the list, and \ the SPACE key to deselect any items you don't want to install. \ Press ENTER when you are \ done." 16 72 6 \ -"emacs" "The GNU Emacs 22.3 system" "on" \ +"emacs" "The GNU Emacs 23.2 system" "on" \ 2> $TMP/SeTpkgs if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs diff --git a/slackware64/e/maketag.ez b/slackware64/e/maketag.ez index 009f9b39b..ea5da8bb8 100644 --- a/slackware64/e/maketag.ez +++ b/slackware64/e/maketag.ez @@ -11,7 +11,7 @@ from series E. Use the UP/DOWN keys to scroll through the list, and \ the SPACE key to deselect any items you don't want to install. \ Press ENTER when you are \ done." 16 72 6 \ -"emacs" "The GNU Emacs 22.3 system" "on" \ +"emacs" "The GNU Emacs 23.2 system" "on" \ 2> $TMP/SeTpkgs if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs diff --git a/slackware64/k/maketag b/slackware64/k/maketag index 281a5628c..3e35378f6 100644 --- a/slackware64/k/maketag +++ b/slackware64/k/maketag @@ -21,7 +21,7 @@ from series K. Use the UP/DOWN keys to scroll through the list, and \ the SPACE key to deselect any items you don't want to install. \ Press ENTER when you are \ done." 11 70 1 \ -"kernel-source" "Linux 2.6.29.6 kernel source" "on" \ +"kernel-source" "Linux 2.6.33.4 kernel source" "on" \ 2> $TMP/SeTpkgs if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs diff --git a/slackware64/k/maketag.ez b/slackware64/k/maketag.ez index 281a5628c..3e35378f6 100644 --- a/slackware64/k/maketag.ez +++ b/slackware64/k/maketag.ez @@ -21,7 +21,7 @@ from series K. Use the UP/DOWN keys to scroll through the list, and \ the SPACE key to deselect any items you don't want to install. \ Press ENTER when you are \ done." 11 70 1 \ -"kernel-source" "Linux 2.6.29.6 kernel source" "on" \ +"kernel-source" "Linux 2.6.33.4 kernel source" "on" \ 2> $TMP/SeTpkgs if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs diff --git a/slackware64/kde/maketag b/slackware64/kde/maketag index 674b04bf1..03a71bbc3 100644 --- a/slackware64/kde/maketag +++ b/slackware64/kde/maketag @@ -22,7 +22,7 @@ to install. Press ENTER when you are done." \ "kdeadmin" "KDE system administration utilities" "on" \ "kdeartwork" "Extra themes, sounds, wallpapers, and styles" "on" \ "kdebase" "The K Desktop Environment base package" "on" \ -"kdebase-runtime" "The KDE base rumtime support package" "on" \ +"kdebase-runtime" "The KDE base runtime support package" "on" \ "kdebase-workspace" "The KDE base workspace package" "on" \ "kdebindings" "Optional KDE library bindings" "on" \ "kdeedu" "KDE Edutainment programs" "on" \ @@ -32,6 +32,7 @@ to install. Press ENTER when you are done." \ "kdemultimedia" "Multimedia programs for KDE" "on" \ "kdenetwork" "Networking programs for KDE" "on" \ "kdepim" "Personal Information Management tools" "on" \ +"kdepim-runtime" "KDE PIM runtime support package" "on" \ "kdepimlibs" "KDE Personal Information Management libraries" "on" \ "kdeplasma-addons" "Plasma addons for KDE" "on" \ "kdesdk" "KDE software development kit" "on" \ @@ -42,15 +43,18 @@ to install. Press ENTER when you are done." \ "kdewebdev" "Quanta Plus web development environment" "on" \ "koffice" "The KDE office productivity suite" "on" \ "konq-plugins" "Plugins to extend Konqueror" "on" \ +"kopete-cryptography" "Crypto support for Kopete Messenger" "on" \ "ktorrent" "BitTorrent program for KDE" "on" \ -"mplayerthumbs" "Use MPlayer for KDE video thumbnail support" "on" \ +"oxygen-icons" "Oxygen icon theme" "on" \ +"polkit-kde-1" "KDE polkit authenticator" "on" \ +"polkit-qt-1" "Qt wrapper for the polkit API" "on" \ "skanlite" "KDE scanning program" "on" \ 2> $TMP/SeTpkgs if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins ktorrent mplayerthumbs skanlite \ +amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins kopete-cryptography ktorrent oxygen-icons polkit-kde-1 polkit-qt-1 skanlite \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -58,7 +62,7 @@ amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeart fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins ktorrent mplayerthumbs skanlite \ +amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins kopete-cryptography ktorrent oxygen-icons polkit-kde-1 polkit-qt-1 skanlite \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/kde/maketag.ez b/slackware64/kde/maketag.ez index 674b04bf1..03a71bbc3 100644 --- a/slackware64/kde/maketag.ez +++ b/slackware64/kde/maketag.ez @@ -22,7 +22,7 @@ to install. Press ENTER when you are done." \ "kdeadmin" "KDE system administration utilities" "on" \ "kdeartwork" "Extra themes, sounds, wallpapers, and styles" "on" \ "kdebase" "The K Desktop Environment base package" "on" \ -"kdebase-runtime" "The KDE base rumtime support package" "on" \ +"kdebase-runtime" "The KDE base runtime support package" "on" \ "kdebase-workspace" "The KDE base workspace package" "on" \ "kdebindings" "Optional KDE library bindings" "on" \ "kdeedu" "KDE Edutainment programs" "on" \ @@ -32,6 +32,7 @@ to install. Press ENTER when you are done." \ "kdemultimedia" "Multimedia programs for KDE" "on" \ "kdenetwork" "Networking programs for KDE" "on" \ "kdepim" "Personal Information Management tools" "on" \ +"kdepim-runtime" "KDE PIM runtime support package" "on" \ "kdepimlibs" "KDE Personal Information Management libraries" "on" \ "kdeplasma-addons" "Plasma addons for KDE" "on" \ "kdesdk" "KDE software development kit" "on" \ @@ -42,15 +43,18 @@ to install. Press ENTER when you are done." \ "kdewebdev" "Quanta Plus web development environment" "on" \ "koffice" "The KDE office productivity suite" "on" \ "konq-plugins" "Plugins to extend Konqueror" "on" \ +"kopete-cryptography" "Crypto support for Kopete Messenger" "on" \ "ktorrent" "BitTorrent program for KDE" "on" \ -"mplayerthumbs" "Use MPlayer for KDE video thumbnail support" "on" \ +"oxygen-icons" "Oxygen icon theme" "on" \ +"polkit-kde-1" "KDE polkit authenticator" "on" \ +"polkit-qt-1" "Qt wrapper for the polkit API" "on" \ "skanlite" "KDE scanning program" "on" \ 2> $TMP/SeTpkgs if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins ktorrent mplayerthumbs skanlite \ +amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins kopete-cryptography ktorrent oxygen-icons polkit-kde-1 polkit-qt-1 skanlite \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -58,7 +62,7 @@ amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeart fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins ktorrent mplayerthumbs skanlite \ +amarok guidance-power-manager k3b kaudiocreator kdeaccessibility kdeadmin kdeartwork kdebase kdebase-runtime kdebase-workspace kdebindings kdeedu kdegames kdegraphics kdelibs kdemultimedia kdenetwork kdepim kdepim-runtime kdepimlibs kdeplasma-addons kdesdk kdetoys kdeutils kdevelop kdevplatform kdewebdev koffice konq-plugins kopete-cryptography ktorrent oxygen-icons polkit-kde-1 polkit-qt-1 skanlite \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/kde/tagfile b/slackware64/kde/tagfile index dab8651c6..b16b8ab1c 100644 --- a/slackware64/kde/tagfile +++ b/slackware64/kde/tagfile @@ -16,6 +16,7 @@ kdelibs:ADD kdemultimedia:REC kdenetwork:REC kdepim:REC +kdepim-runtime:REC kdepimlibs:REC kdeplasma-addons:ADD kdesdk:OPT @@ -26,6 +27,9 @@ kdevplatform:OPT kdewebdev:OPT koffice:REC konq-plugins:REC +kopete-cryptography:REC ktorrent:REC -mplayerthumbs:OPT +oxygen-icons:REC +polkit-kde-1:ADD +polkit-qt-1:ADD skanlite:REC diff --git a/slackware64/kdei/maketag b/slackware64/kdei/maketag index ba8020c05..246907ad4 100644 --- a/slackware64/kdei/maketag +++ b/slackware64/kdei/maketag @@ -13,25 +13,29 @@ Press ENTER \ when you are done." 21 74 12 \ "kde-l10n-ar" "Arabic language support" "off" \ "kde-l10n-bg" "Bulgarian language support" "off" \ -"kde-l10n-bn_IN" "Bengali language support" "off" \ "kde-l10n-ca" "Catalan language support" "off" \ +"kde-l10n-ca@valencia" "Catalan (Valencian) language support" "on" \ "kde-l10n-cs" "Czech language support" "off" \ "kde-l10n-csb" "Kashubian language support" "off" \ "kde-l10n-da" "Danish language support" "off" \ "kde-l10n-de" "German language support" "off" \ "kde-l10n-el" "Greek language support" "off" \ "kde-l10n-en_GB" "English (UK) language support" "off" \ +"kde-l10n-eo" "Esperanto language support" "off" \ "kde-l10n-es" "Spanish language support" "off" \ "kde-l10n-et" "Estonian language support" "off" \ "kde-l10n-eu" "Basque language support" "off" \ "kde-l10n-fi" "Finnish language support" "off" \ "kde-l10n-fr" "French language support" "off" \ +"kde-l10n-fy" "Abkhasysk language support" "off" \ "kde-l10n-ga" "Irish language support" "off" \ "kde-l10n-gl" "Galician language support" "off" \ "kde-l10n-gu" "Gujarati language support" "off" \ "kde-l10n-he" "Hebrew language support" "off" \ "kde-l10n-hi" "Hindi language support" "off" \ +"kde-l10n-hr" "Croatian language support" "off" \ "kde-l10n-hu" "Hungarian language support" "off" \ +"kde-l10n-id" "Indonesian language support" "on" \ "kde-l10n-is" "Icelandic language support" "off" \ "kde-l10n-it" "Italian language support" "off" \ "kde-l10n-ja" "Japanese language support" "off" \ @@ -39,13 +43,11 @@ when you are done." 21 74 12 \ "kde-l10n-km" "Khmer language support" "off" \ "kde-l10n-kn" "Kannada language support" "off" \ "kde-l10n-ko" "Korean language support" "off" \ -"kde-l10n-ku" "Kurdish language support" "off" \ "kde-l10n-lt" "Lithuanian language support" "off" \ "kde-l10n-lv" "Latvian language support" "off" \ "kde-l10n-mai" "Maithili language support" "off" \ "kde-l10n-mk" "Macedonian language support" "off" \ "kde-l10n-ml" "Malayalam language support" "off" \ -"kde-l10n-mr" "Marathi language support" "off" \ "kde-l10n-nb" "Norwegian (Bokmaal) language support" "off" \ "kde-l10n-nds" "Low Saxon language support" "off" \ "kde-l10n-nl" "Dutch language support" "off" \ @@ -56,19 +58,19 @@ when you are done." 21 74 12 \ "kde-l10n-pt_BR" "Brazil Portuguese language support" "off" \ "kde-l10n-ro" "Romanian language support" "off" \ "kde-l10n-ru" "Russian language support" "off" \ +"kde-l10n-si" "Sinhala language support" "on" \ "kde-l10n-sk" "Slovak language support" "off" \ "kde-l10n-sl" "Slovenian language support" "off" \ "kde-l10n-sr" "Serbian language support" "off" \ "kde-l10n-sv" "Swedish language support" "off" \ "kde-l10n-tg" "Tajik language support" "off" \ -"kde-l10n-th" "Thai language support" "off" \ "kde-l10n-tr" "Turkish language support" "off" \ "kde-l10n-uk" "Ukrainian language support" "off" \ "kde-l10n-wa" "Walloon language support" "off" \ "kde-l10n-zh_CN" "Simplified Chinese language support" "off" \ "kde-l10n-zh_TW" "Chinese language support" "off" \ "koffice-l10n-ca" "Catalan language support" "off" \ -"koffice-l10n-cs" "Czech language support" "off" \ +"koffice-l10n-ca@valencia" "Valencian (southern Catalan) language support" "off" \ "koffice-l10n-da" "Danish language support" "off" \ "koffice-l10n-de" "German language support" "off" \ "koffice-l10n-el" "Greek language support" "off" \ @@ -78,7 +80,7 @@ when you are done." 21 74 12 \ "koffice-l10n-fr" "French language support" "off" \ "koffice-l10n-fy" "Abkhasysk language support" "off" \ "koffice-l10n-gl" "Galician language support" "off" \ -"koffice-l10n-hi" "Hindi language support" "off" \ +"koffice-l10n-hne" "Chhattisgarhi language support" "off" \ "koffice-l10n-it" "Italian language support" "off" \ "koffice-l10n-ja" "Japanese language support" "off" \ "koffice-l10n-kk" "Kazakh language support" "off" \ @@ -99,7 +101,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -kde-l10n-ar kde-l10n-bg kde-l10n-bn_IN kde-l10n-ca kde-l10n-cs kde-l10n-csb kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hu kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-ku kde-l10n-lt kde-l10n-lv kde-l10n-mai kde-l10n-mk kde-l10n-ml kde-l10n-mr kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-th kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-cs koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-fy koffice-l10n-gl koffice-l10n-hi koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \ +kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-csb kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-eo kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-fy kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hr kde-l10n-hu kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-mai kde-l10n-mk kde-l10n-ml kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-si kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-ca@valencia koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-fy koffice-l10n-gl koffice-l10n-hne koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -107,7 +109,7 @@ kde-l10n-ar kde-l10n-bg kde-l10n-bn_IN kde-l10n-ca kde-l10n-cs kde-l10n-csb kde- fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -kde-l10n-ar kde-l10n-bg kde-l10n-bn_IN kde-l10n-ca kde-l10n-cs kde-l10n-csb kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hu kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-ku kde-l10n-lt kde-l10n-lv kde-l10n-mai kde-l10n-mk kde-l10n-ml kde-l10n-mr kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-th kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-cs koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-fy koffice-l10n-gl koffice-l10n-hi koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \ +kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-csb kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-eo kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-fy kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hr kde-l10n-hu kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-mai kde-l10n-mk kde-l10n-ml kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-si kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-ca@valencia koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-fy koffice-l10n-gl koffice-l10n-hne koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/kdei/maketag.ez b/slackware64/kdei/maketag.ez index ba8020c05..246907ad4 100644 --- a/slackware64/kdei/maketag.ez +++ b/slackware64/kdei/maketag.ez @@ -13,25 +13,29 @@ Press ENTER \ when you are done." 21 74 12 \ "kde-l10n-ar" "Arabic language support" "off" \ "kde-l10n-bg" "Bulgarian language support" "off" \ -"kde-l10n-bn_IN" "Bengali language support" "off" \ "kde-l10n-ca" "Catalan language support" "off" \ +"kde-l10n-ca@valencia" "Catalan (Valencian) language support" "on" \ "kde-l10n-cs" "Czech language support" "off" \ "kde-l10n-csb" "Kashubian language support" "off" \ "kde-l10n-da" "Danish language support" "off" \ "kde-l10n-de" "German language support" "off" \ "kde-l10n-el" "Greek language support" "off" \ "kde-l10n-en_GB" "English (UK) language support" "off" \ +"kde-l10n-eo" "Esperanto language support" "off" \ "kde-l10n-es" "Spanish language support" "off" \ "kde-l10n-et" "Estonian language support" "off" \ "kde-l10n-eu" "Basque language support" "off" \ "kde-l10n-fi" "Finnish language support" "off" \ "kde-l10n-fr" "French language support" "off" \ +"kde-l10n-fy" "Abkhasysk language support" "off" \ "kde-l10n-ga" "Irish language support" "off" \ "kde-l10n-gl" "Galician language support" "off" \ "kde-l10n-gu" "Gujarati language support" "off" \ "kde-l10n-he" "Hebrew language support" "off" \ "kde-l10n-hi" "Hindi language support" "off" \ +"kde-l10n-hr" "Croatian language support" "off" \ "kde-l10n-hu" "Hungarian language support" "off" \ +"kde-l10n-id" "Indonesian language support" "on" \ "kde-l10n-is" "Icelandic language support" "off" \ "kde-l10n-it" "Italian language support" "off" \ "kde-l10n-ja" "Japanese language support" "off" \ @@ -39,13 +43,11 @@ when you are done." 21 74 12 \ "kde-l10n-km" "Khmer language support" "off" \ "kde-l10n-kn" "Kannada language support" "off" \ "kde-l10n-ko" "Korean language support" "off" \ -"kde-l10n-ku" "Kurdish language support" "off" \ "kde-l10n-lt" "Lithuanian language support" "off" \ "kde-l10n-lv" "Latvian language support" "off" \ "kde-l10n-mai" "Maithili language support" "off" \ "kde-l10n-mk" "Macedonian language support" "off" \ "kde-l10n-ml" "Malayalam language support" "off" \ -"kde-l10n-mr" "Marathi language support" "off" \ "kde-l10n-nb" "Norwegian (Bokmaal) language support" "off" \ "kde-l10n-nds" "Low Saxon language support" "off" \ "kde-l10n-nl" "Dutch language support" "off" \ @@ -56,19 +58,19 @@ when you are done." 21 74 12 \ "kde-l10n-pt_BR" "Brazil Portuguese language support" "off" \ "kde-l10n-ro" "Romanian language support" "off" \ "kde-l10n-ru" "Russian language support" "off" \ +"kde-l10n-si" "Sinhala language support" "on" \ "kde-l10n-sk" "Slovak language support" "off" \ "kde-l10n-sl" "Slovenian language support" "off" \ "kde-l10n-sr" "Serbian language support" "off" \ "kde-l10n-sv" "Swedish language support" "off" \ "kde-l10n-tg" "Tajik language support" "off" \ -"kde-l10n-th" "Thai language support" "off" \ "kde-l10n-tr" "Turkish language support" "off" \ "kde-l10n-uk" "Ukrainian language support" "off" \ "kde-l10n-wa" "Walloon language support" "off" \ "kde-l10n-zh_CN" "Simplified Chinese language support" "off" \ "kde-l10n-zh_TW" "Chinese language support" "off" \ "koffice-l10n-ca" "Catalan language support" "off" \ -"koffice-l10n-cs" "Czech language support" "off" \ +"koffice-l10n-ca@valencia" "Valencian (southern Catalan) language support" "off" \ "koffice-l10n-da" "Danish language support" "off" \ "koffice-l10n-de" "German language support" "off" \ "koffice-l10n-el" "Greek language support" "off" \ @@ -78,7 +80,7 @@ when you are done." 21 74 12 \ "koffice-l10n-fr" "French language support" "off" \ "koffice-l10n-fy" "Abkhasysk language support" "off" \ "koffice-l10n-gl" "Galician language support" "off" \ -"koffice-l10n-hi" "Hindi language support" "off" \ +"koffice-l10n-hne" "Chhattisgarhi language support" "off" \ "koffice-l10n-it" "Italian language support" "off" \ "koffice-l10n-ja" "Japanese language support" "off" \ "koffice-l10n-kk" "Kazakh language support" "off" \ @@ -99,7 +101,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -kde-l10n-ar kde-l10n-bg kde-l10n-bn_IN kde-l10n-ca kde-l10n-cs kde-l10n-csb kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hu kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-ku kde-l10n-lt kde-l10n-lv kde-l10n-mai kde-l10n-mk kde-l10n-ml kde-l10n-mr kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-th kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-cs koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-fy koffice-l10n-gl koffice-l10n-hi koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \ +kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-csb kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-eo kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-fy kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hr kde-l10n-hu kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-mai kde-l10n-mk kde-l10n-ml kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-si kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-ca@valencia koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-fy koffice-l10n-gl koffice-l10n-hne koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -107,7 +109,7 @@ kde-l10n-ar kde-l10n-bg kde-l10n-bn_IN kde-l10n-ca kde-l10n-cs kde-l10n-csb kde- fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -kde-l10n-ar kde-l10n-bg kde-l10n-bn_IN kde-l10n-ca kde-l10n-cs kde-l10n-csb kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hu kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-ku kde-l10n-lt kde-l10n-lv kde-l10n-mai kde-l10n-mk kde-l10n-ml kde-l10n-mr kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-th kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-cs koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-fy koffice-l10n-gl koffice-l10n-hi koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \ +kde-l10n-ar kde-l10n-bg kde-l10n-ca kde-l10n-ca@valencia kde-l10n-cs kde-l10n-csb kde-l10n-da kde-l10n-de kde-l10n-el kde-l10n-en_GB kde-l10n-eo kde-l10n-es kde-l10n-et kde-l10n-eu kde-l10n-fi kde-l10n-fr kde-l10n-fy kde-l10n-ga kde-l10n-gl kde-l10n-gu kde-l10n-he kde-l10n-hi kde-l10n-hr kde-l10n-hu kde-l10n-id kde-l10n-is kde-l10n-it kde-l10n-ja kde-l10n-kk kde-l10n-km kde-l10n-kn kde-l10n-ko kde-l10n-lt kde-l10n-lv kde-l10n-mai kde-l10n-mk kde-l10n-ml kde-l10n-nb kde-l10n-nds kde-l10n-nl kde-l10n-nn kde-l10n-pa kde-l10n-pl kde-l10n-pt kde-l10n-pt_BR kde-l10n-ro kde-l10n-ru kde-l10n-si kde-l10n-sk kde-l10n-sl kde-l10n-sr kde-l10n-sv kde-l10n-tg kde-l10n-tr kde-l10n-uk kde-l10n-wa kde-l10n-zh_CN kde-l10n-zh_TW koffice-l10n-ca koffice-l10n-ca@valencia koffice-l10n-da koffice-l10n-de koffice-l10n-el koffice-l10n-en_GB koffice-l10n-es koffice-l10n-et koffice-l10n-fr koffice-l10n-fy koffice-l10n-gl koffice-l10n-hne koffice-l10n-it koffice-l10n-ja koffice-l10n-kk koffice-l10n-nb koffice-l10n-nds koffice-l10n-nl koffice-l10n-pl koffice-l10n-pt koffice-l10n-pt_BR koffice-l10n-sv koffice-l10n-tr koffice-l10n-uk koffice-l10n-wa koffice-l10n-zh_CN koffice-l10n-zh_TW \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/kdei/tagfile b/slackware64/kdei/tagfile index 299b1aff0..0af65d55d 100644 --- a/slackware64/kdei/tagfile +++ b/slackware64/kdei/tagfile @@ -1,24 +1,28 @@ kde-l10n-ar:OPT kde-l10n-bg:OPT -kde-l10n-bn_IN:OPT kde-l10n-ca:OPT +kde-l10n-ca@valencia:ADD kde-l10n-cs:OPT kde-l10n-csb:OPT kde-l10n-da:OPT kde-l10n-de:OPT kde-l10n-el:OPT kde-l10n-en_GB:OPT +kde-l10n-eo:OPT kde-l10n-es:OPT kde-l10n-et:OPT kde-l10n-eu:OPT kde-l10n-fi:OPT kde-l10n-fr:OPT +kde-l10n-fy:OPT kde-l10n-ga:OPT kde-l10n-gl:OPT kde-l10n-gu:OPT kde-l10n-he:OPT kde-l10n-hi:OPT +kde-l10n-hr:OPT kde-l10n-hu:OPT +kde-l10n-id:ADD kde-l10n-is:OPT kde-l10n-it:OPT kde-l10n-ja:OPT @@ -26,13 +30,11 @@ kde-l10n-kk:OPT kde-l10n-km:OPT kde-l10n-kn:OPT kde-l10n-ko:OPT -kde-l10n-ku:OPT kde-l10n-lt:OPT kde-l10n-lv:OPT kde-l10n-mai:OPT kde-l10n-mk:OPT kde-l10n-ml:OPT -kde-l10n-mr:OPT kde-l10n-nb:OPT kde-l10n-nds:OPT kde-l10n-nl:OPT @@ -43,19 +45,19 @@ kde-l10n-pt:OPT kde-l10n-pt_BR:OPT kde-l10n-ro:OPT kde-l10n-ru:OPT +kde-l10n-si:ADD kde-l10n-sk:OPT kde-l10n-sl:OPT kde-l10n-sr:OPT kde-l10n-sv:OPT kde-l10n-tg:OPT -kde-l10n-th:OPT kde-l10n-tr:OPT kde-l10n-uk:OPT kde-l10n-wa:OPT kde-l10n-zh_CN:OPT kde-l10n-zh_TW:OPT koffice-l10n-ca:OPT -koffice-l10n-cs:OPT +koffice-l10n-ca@valencia:OPT koffice-l10n-da:OPT koffice-l10n-de:OPT koffice-l10n-el:OPT @@ -65,7 +67,7 @@ koffice-l10n-et:OPT koffice-l10n-fr:OPT koffice-l10n-fy:OPT koffice-l10n-gl:OPT -koffice-l10n-hi:OPT +koffice-l10n-hne:OPT koffice-l10n-it:OPT koffice-l10n-ja:OPT koffice-l10n-kk:OPT diff --git a/slackware64/l/maketag b/slackware64/l/maketag index d9a7c0095..ccbdee96f 100644 --- a/slackware64/l/maketag +++ b/slackware64/l/maketag @@ -13,6 +13,7 @@ Keep in mind that many of these libraries are required by KDE \ or other parts of the system. It's safest to install all of these \ packages even if you aren't sure if you need them. Press ENTER when \ you are done." 22 74 10 \ +"ConsoleKit" "ConsoleKit user session framework" "on" \ "M2Crypto" "Cryptography toolkit for Python" "on" \ "PyQt" "Python bindings for Qt" "on" \ "QScintilla" "Qt port of the Scintilla C++ editor control" "on" \ @@ -25,6 +26,7 @@ you are done." 22 74 10 \ "aspell" "Spell checking library" "on" \ "aspell-en" "English word list for Aspell" "on" \ "atk" "Accessability library" "on" \ +"attica" "Qt Collaboration library" "on" \ "audiofile" "SGI's Audio File sound library" "on" \ "automoc4" "Automatic moc for Qt4" "on" \ "babl" "A pixel format translation library" "on" \ @@ -38,11 +40,14 @@ you are done." 22 74 10 \ "dbus-python" "Python bindings for the D-Bus library" "on" \ "desktop-file-utils" "Tools for .desktop files" "on" \ "djvulibre" "Web-centric document and image format" "on" \ +"ebook-tools" "Tools for ebook file formats" "on" \ +"eggdbus" "D-Bus bindings for GObject" "on" \ "eigen2" "C++ math library" "on" \ "enchant" "A wrapper for spellcheck libraries" "on" \ "esound" "Enlightened Sound Daemon" "on" \ "exiv2" "Exif and IPTC Metadata Library and Tools" "on" \ "expat" "XML parser library" "on" \ +"fftw" "Fast Fourier Transform library" "on" \ "freetype" "Font rendering library" "on" \ "fribidi" "Unicode BiDirectional library" "on" \ "fuse" "Tools for using filesystems in userspace" "on" \ @@ -50,6 +55,7 @@ you are done." 22 74 10 \ "gd" "A graphics library" "on" \ "gdbm" "The GNU gdbm database library" "on" \ "gegl" "Generic Graphics Library" "on" \ +"giflib" "GIF image library" "on" \ "glib" "Support library used by GTK+" "on" \ "glib2" "GLib version 2" "on" \ "glibc" "The GNU C library" "on" \ @@ -60,6 +66,7 @@ you are done." 22 74 10 \ "gmp" "A library for arithmetic" "on" \ "gnome-icon-theme" "Icons for GTK+ applications" "on" \ "gst-plugins-base" "A base set of GStreamer plugins" "on" \ +"gst-plugins-good" "A good set of GStreamer plugins" "on" \ "gstreamer" "Streaming multimedia framework library" "on" \ "gtk+" "A graphical toolkit library" "on" \ "gtk+2" "GTK+ version 2" "on" \ @@ -67,6 +74,7 @@ you are done." 22 74 10 \ "hal" "The HAL Hardware Abstraction Layer" "on" \ "hal-info" "Hardware device info for HAL" "on" \ "hicolor-icon-theme" "Standard icon theme tree" "on" \ +"hunspell" "Spell checker and morphological analyzer" "on" \ "icon-naming-utils" "Icon naming utilities" "on" \ "ilmbase" "Industrial Light & Magic base libraries" "on" \ "imlib" "Image loading and rendering library" "on" \ @@ -83,20 +91,22 @@ you are done." 22 74 10 \ "libcap" "POSIX capabilities library" "on" \ "libcddb" "online CD database lookup library" "on" \ "libcdio" "GNU CD I/O library" "on" \ +"libdiscid" "Library to generate DiscIDs from audio CDs" "on" \ "libdvdread" "Library for reading DVDs" "on" \ "libexif" "EXIF (image information) library" "on" \ "libglade" "An interface construction library" "on" \ "libgphoto2" "A library for accessing digital cameras" "on" \ "libgpod" "A library for a popular music device" "on" \ "libgsf" "File I/O library" "on" \ -"libgtkhtml" "HTML rendering library" "on" \ "libical" "iCAL protocol implementation" "on" \ "libid3tag" "ID3 tag manipulation library" "on" \ "libidl" "Interface Definition Language library" "on" \ "libidn" "GNU Internationalized Domain Name library" "on" \ "libieee1284" "Library to identify parallel port devices" "on" \ +"libiodbc" "Independent Open DataBase Connectivity" "on" \ "libjpeg" "JPEG image library and tools" "on" \ "libkarma" "A library for accessing the Rio Karma player" "on" \ +"liblastfm" "Library for interfacing with last.fm" "on" \ "libmad" "high-quality MPEG audio library" "on" \ "libmcrypt" "Mcrypt encryption library" "on" \ "libmcs" "Manages configuration settings" "on" \ @@ -106,16 +116,17 @@ you are done." 22 74 10 \ "libmtp" "MTP media device support library" "on" \ "libnjb" "Creative Nomad and related device library" "on" \ "libnl" "Netlink socket library" "on" \ +"libnotify" "A library for event notification" "on" \ "libogg" "Ogg Bitstream library" "on" \ "liboil" "CPU optimizations library" "on" \ "libpng" "Portable Network Graphics library" "on" \ "libraw1394" "User space IEEE 1394 driver" "on" \ "librsvg" "Scalable Vector Graphics library" "on" \ +"libsamplerate" "Digital audio resampling library" "on" \ "libspectre" "Ghostscript wrapper library" "on" \ "libtermcap" "GNU terminal control library" "on" \ "libtheora" "Theora video codec library" "on" \ "libtiff" "Tag Image File format library" "on" \ -"libungif" "GIF extraction library" "on" \ "libusb" "A library for accessing USB devices" "on" \ "libvisual" "Audio visualization library" "on" \ "libvisual-plugins" "Plugins for the libvisual library" "on" \ @@ -129,6 +140,7 @@ you are done." 22 74 10 \ "libxml2" "XML parser library v2" "on" \ "libxslt" "XML transformation library" "on" \ "libzip" "Zip archive library" "on" \ +"loudmouth" "Jabber protocol library" "on" \ "lzo" "fast data compression library" "on" \ "mhash" "Thread-safe hash library" "on" \ "mm" "Shared Memory Allocation library" "on" \ @@ -136,6 +148,7 @@ you are done." 22 74 10 \ "ncurses" "CRT screen handling package" "on" \ "neon" "HTTP and WebDAV client library" "on" \ "netpbm" "Graphics library and tools" "on" \ +"notify-python" "Python bindings for libnotify" "on" \ "openexr" "HDR image file format and library" "on" \ "pango" "Text rendering library" "on" \ "parted" "GNU parted, a partition manipulation program" "on" \ @@ -143,6 +156,8 @@ you are done." 22 74 10 \ "phonon" "Multimedia framework for KDE4" "on" \ "pil" "Python Imaging Library" "on" \ "pilot-link" "PalmOS communication library" "on" \ +"polkit" "Authentication policy framework" "on" \ +"polkit-gnome" "GTK+/XDG polkit authenticator" "on" \ "poppler" "Portable Document Format (PDF) library" "on" \ "poppler-data" "Data files that can be used by poppler" "on" \ "popt" "Command line parsing library" "on" \ @@ -164,6 +179,7 @@ you are done." 22 74 10 \ "redland" "RDF high-level interface library" "on" \ "sdl" "Simple DirectMedia Layer library" "on" \ "seamonkey-solibs" "SeaMonkey shared libraries (runtime subset)" "on" \ +"shared-desktop-ontologies" "Shared OSCAF desktop ontologies" "on" \ "shared-mime-info" "MIME database" "on" \ "sip" "Tool for generating Python bindings" "on" \ "slang" "S-Lang interpreted language and library v2" "on" \ @@ -172,12 +188,15 @@ you are done." 22 74 10 \ "startup-notification" "Busy cursor library" "on" \ "strigi" "Fast and light desktop search engine" "on" \ "svgalib" "Super-VGA Graphics Library" "on" \ +"system-config-printer" "CUPS printer administration tool" "on" \ "t1lib" "Library for handling Type 1 fonts" "on" \ "taglib" "Audio meta-data library" "on" \ "taglib-extras" "Taglib extra formats support" "on" \ "tango-icon-theme" "Tango icon theme" "on" \ "tango-icon-theme-extras" "Extra icons for the Tango icon theme" "on" \ "urwid" "Python console UI module" "on" \ +"v4l-utils" "Libraries and utilities for video4linux" "on" \ +"virtuoso-ose" "Object-relational SQL database" "on" \ "vte" "A terminal emulator for GTK+" "on" \ "wavpack" "A lossless WAV file compressor" "on" \ "wv2" "MS Word .doc import library" "on" \ @@ -187,7 +206,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre eigen2 enchant esound exiv2 expat freetype fribidi fuse gamin gd gdbm gegl glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdvdread libexif libglade libgphoto2 libgpod libgsf libgtkhtml libical libid3tag libidl libidn libieee1284 libjpeg libkarma libmad libmcrypt libmcs libmng libmowgli libmsn libmtp libnjb libnl libogg liboil libpng libraw1394 librsvg libspectre libtermcap libtheora libtiff libungif libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip lzo mhash mm mpfr ncurses neon netpbm openexr pango parted pcre phonon pil pilot-link poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid vte wavpack wv2 zlib \ +ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eggdbus eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gd gdbm gegl giflib glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme hunspell icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdiscid libdvdread libexif libglade libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmsn libmtp libnjb libnl libnotify libogg liboil libpng libraw1394 librsvg libsamplerate libspectre libtermcap libtheora libtiff libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip loudmouth lzo mhash mm mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon pil pilot-link polkit polkit-gnome poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-desktop-ontologies shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack wv2 zlib \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -195,7 +214,7 @@ M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell asp fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre eigen2 enchant esound exiv2 expat freetype fribidi fuse gamin gd gdbm gegl glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdvdread libexif libglade libgphoto2 libgpod libgsf libgtkhtml libical libid3tag libidl libidn libieee1284 libjpeg libkarma libmad libmcrypt libmcs libmng libmowgli libmsn libmtp libnjb libnl libogg liboil libpng libraw1394 librsvg libspectre libtermcap libtheora libtiff libungif libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip lzo mhash mm mpfr ncurses neon netpbm openexr pango parted pcre phonon pil pilot-link poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid vte wavpack wv2 zlib \ +ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eggdbus eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gd gdbm gegl giflib glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme hunspell icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdiscid libdvdread libexif libglade libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmsn libmtp libnjb libnl libnotify libogg liboil libpng libraw1394 librsvg libsamplerate libspectre libtermcap libtheora libtiff libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip loudmouth lzo mhash mm mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon pil pilot-link polkit polkit-gnome poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-desktop-ontologies shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack wv2 zlib \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/l/maketag.ez b/slackware64/l/maketag.ez index d9a7c0095..ccbdee96f 100644 --- a/slackware64/l/maketag.ez +++ b/slackware64/l/maketag.ez @@ -13,6 +13,7 @@ Keep in mind that many of these libraries are required by KDE \ or other parts of the system. It's safest to install all of these \ packages even if you aren't sure if you need them. Press ENTER when \ you are done." 22 74 10 \ +"ConsoleKit" "ConsoleKit user session framework" "on" \ "M2Crypto" "Cryptography toolkit for Python" "on" \ "PyQt" "Python bindings for Qt" "on" \ "QScintilla" "Qt port of the Scintilla C++ editor control" "on" \ @@ -25,6 +26,7 @@ you are done." 22 74 10 \ "aspell" "Spell checking library" "on" \ "aspell-en" "English word list for Aspell" "on" \ "atk" "Accessability library" "on" \ +"attica" "Qt Collaboration library" "on" \ "audiofile" "SGI's Audio File sound library" "on" \ "automoc4" "Automatic moc for Qt4" "on" \ "babl" "A pixel format translation library" "on" \ @@ -38,11 +40,14 @@ you are done." 22 74 10 \ "dbus-python" "Python bindings for the D-Bus library" "on" \ "desktop-file-utils" "Tools for .desktop files" "on" \ "djvulibre" "Web-centric document and image format" "on" \ +"ebook-tools" "Tools for ebook file formats" "on" \ +"eggdbus" "D-Bus bindings for GObject" "on" \ "eigen2" "C++ math library" "on" \ "enchant" "A wrapper for spellcheck libraries" "on" \ "esound" "Enlightened Sound Daemon" "on" \ "exiv2" "Exif and IPTC Metadata Library and Tools" "on" \ "expat" "XML parser library" "on" \ +"fftw" "Fast Fourier Transform library" "on" \ "freetype" "Font rendering library" "on" \ "fribidi" "Unicode BiDirectional library" "on" \ "fuse" "Tools for using filesystems in userspace" "on" \ @@ -50,6 +55,7 @@ you are done." 22 74 10 \ "gd" "A graphics library" "on" \ "gdbm" "The GNU gdbm database library" "on" \ "gegl" "Generic Graphics Library" "on" \ +"giflib" "GIF image library" "on" \ "glib" "Support library used by GTK+" "on" \ "glib2" "GLib version 2" "on" \ "glibc" "The GNU C library" "on" \ @@ -60,6 +66,7 @@ you are done." 22 74 10 \ "gmp" "A library for arithmetic" "on" \ "gnome-icon-theme" "Icons for GTK+ applications" "on" \ "gst-plugins-base" "A base set of GStreamer plugins" "on" \ +"gst-plugins-good" "A good set of GStreamer plugins" "on" \ "gstreamer" "Streaming multimedia framework library" "on" \ "gtk+" "A graphical toolkit library" "on" \ "gtk+2" "GTK+ version 2" "on" \ @@ -67,6 +74,7 @@ you are done." 22 74 10 \ "hal" "The HAL Hardware Abstraction Layer" "on" \ "hal-info" "Hardware device info for HAL" "on" \ "hicolor-icon-theme" "Standard icon theme tree" "on" \ +"hunspell" "Spell checker and morphological analyzer" "on" \ "icon-naming-utils" "Icon naming utilities" "on" \ "ilmbase" "Industrial Light & Magic base libraries" "on" \ "imlib" "Image loading and rendering library" "on" \ @@ -83,20 +91,22 @@ you are done." 22 74 10 \ "libcap" "POSIX capabilities library" "on" \ "libcddb" "online CD database lookup library" "on" \ "libcdio" "GNU CD I/O library" "on" \ +"libdiscid" "Library to generate DiscIDs from audio CDs" "on" \ "libdvdread" "Library for reading DVDs" "on" \ "libexif" "EXIF (image information) library" "on" \ "libglade" "An interface construction library" "on" \ "libgphoto2" "A library for accessing digital cameras" "on" \ "libgpod" "A library for a popular music device" "on" \ "libgsf" "File I/O library" "on" \ -"libgtkhtml" "HTML rendering library" "on" \ "libical" "iCAL protocol implementation" "on" \ "libid3tag" "ID3 tag manipulation library" "on" \ "libidl" "Interface Definition Language library" "on" \ "libidn" "GNU Internationalized Domain Name library" "on" \ "libieee1284" "Library to identify parallel port devices" "on" \ +"libiodbc" "Independent Open DataBase Connectivity" "on" \ "libjpeg" "JPEG image library and tools" "on" \ "libkarma" "A library for accessing the Rio Karma player" "on" \ +"liblastfm" "Library for interfacing with last.fm" "on" \ "libmad" "high-quality MPEG audio library" "on" \ "libmcrypt" "Mcrypt encryption library" "on" \ "libmcs" "Manages configuration settings" "on" \ @@ -106,16 +116,17 @@ you are done." 22 74 10 \ "libmtp" "MTP media device support library" "on" \ "libnjb" "Creative Nomad and related device library" "on" \ "libnl" "Netlink socket library" "on" \ +"libnotify" "A library for event notification" "on" \ "libogg" "Ogg Bitstream library" "on" \ "liboil" "CPU optimizations library" "on" \ "libpng" "Portable Network Graphics library" "on" \ "libraw1394" "User space IEEE 1394 driver" "on" \ "librsvg" "Scalable Vector Graphics library" "on" \ +"libsamplerate" "Digital audio resampling library" "on" \ "libspectre" "Ghostscript wrapper library" "on" \ "libtermcap" "GNU terminal control library" "on" \ "libtheora" "Theora video codec library" "on" \ "libtiff" "Tag Image File format library" "on" \ -"libungif" "GIF extraction library" "on" \ "libusb" "A library for accessing USB devices" "on" \ "libvisual" "Audio visualization library" "on" \ "libvisual-plugins" "Plugins for the libvisual library" "on" \ @@ -129,6 +140,7 @@ you are done." 22 74 10 \ "libxml2" "XML parser library v2" "on" \ "libxslt" "XML transformation library" "on" \ "libzip" "Zip archive library" "on" \ +"loudmouth" "Jabber protocol library" "on" \ "lzo" "fast data compression library" "on" \ "mhash" "Thread-safe hash library" "on" \ "mm" "Shared Memory Allocation library" "on" \ @@ -136,6 +148,7 @@ you are done." 22 74 10 \ "ncurses" "CRT screen handling package" "on" \ "neon" "HTTP and WebDAV client library" "on" \ "netpbm" "Graphics library and tools" "on" \ +"notify-python" "Python bindings for libnotify" "on" \ "openexr" "HDR image file format and library" "on" \ "pango" "Text rendering library" "on" \ "parted" "GNU parted, a partition manipulation program" "on" \ @@ -143,6 +156,8 @@ you are done." 22 74 10 \ "phonon" "Multimedia framework for KDE4" "on" \ "pil" "Python Imaging Library" "on" \ "pilot-link" "PalmOS communication library" "on" \ +"polkit" "Authentication policy framework" "on" \ +"polkit-gnome" "GTK+/XDG polkit authenticator" "on" \ "poppler" "Portable Document Format (PDF) library" "on" \ "poppler-data" "Data files that can be used by poppler" "on" \ "popt" "Command line parsing library" "on" \ @@ -164,6 +179,7 @@ you are done." 22 74 10 \ "redland" "RDF high-level interface library" "on" \ "sdl" "Simple DirectMedia Layer library" "on" \ "seamonkey-solibs" "SeaMonkey shared libraries (runtime subset)" "on" \ +"shared-desktop-ontologies" "Shared OSCAF desktop ontologies" "on" \ "shared-mime-info" "MIME database" "on" \ "sip" "Tool for generating Python bindings" "on" \ "slang" "S-Lang interpreted language and library v2" "on" \ @@ -172,12 +188,15 @@ you are done." 22 74 10 \ "startup-notification" "Busy cursor library" "on" \ "strigi" "Fast and light desktop search engine" "on" \ "svgalib" "Super-VGA Graphics Library" "on" \ +"system-config-printer" "CUPS printer administration tool" "on" \ "t1lib" "Library for handling Type 1 fonts" "on" \ "taglib" "Audio meta-data library" "on" \ "taglib-extras" "Taglib extra formats support" "on" \ "tango-icon-theme" "Tango icon theme" "on" \ "tango-icon-theme-extras" "Extra icons for the Tango icon theme" "on" \ "urwid" "Python console UI module" "on" \ +"v4l-utils" "Libraries and utilities for video4linux" "on" \ +"virtuoso-ose" "Object-relational SQL database" "on" \ "vte" "A terminal emulator for GTK+" "on" \ "wavpack" "A lossless WAV file compressor" "on" \ "wv2" "MS Word .doc import library" "on" \ @@ -187,7 +206,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre eigen2 enchant esound exiv2 expat freetype fribidi fuse gamin gd gdbm gegl glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdvdread libexif libglade libgphoto2 libgpod libgsf libgtkhtml libical libid3tag libidl libidn libieee1284 libjpeg libkarma libmad libmcrypt libmcs libmng libmowgli libmsn libmtp libnjb libnl libogg liboil libpng libraw1394 librsvg libspectre libtermcap libtheora libtiff libungif libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip lzo mhash mm mpfr ncurses neon netpbm openexr pango parted pcre phonon pil pilot-link poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid vte wavpack wv2 zlib \ +ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eggdbus eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gd gdbm gegl giflib glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme hunspell icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdiscid libdvdread libexif libglade libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmsn libmtp libnjb libnl libnotify libogg liboil libpng libraw1394 librsvg libsamplerate libspectre libtermcap libtheora libtiff libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip loudmouth lzo mhash mm mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon pil pilot-link polkit polkit-gnome poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-desktop-ontologies shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack wv2 zlib \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -195,7 +214,7 @@ M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell asp fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre eigen2 enchant esound exiv2 expat freetype fribidi fuse gamin gd gdbm gegl glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdvdread libexif libglade libgphoto2 libgpod libgsf libgtkhtml libical libid3tag libidl libidn libieee1284 libjpeg libkarma libmad libmcrypt libmcs libmng libmowgli libmsn libmtp libnjb libnl libogg liboil libpng libraw1394 librsvg libspectre libtermcap libtheora libtiff libungif libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip lzo mhash mm mpfr ncurses neon netpbm openexr pango parted pcre phonon pil pilot-link poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid vte wavpack wv2 zlib \ +ConsoleKit M2Crypto PyQt QScintilla aalib akonadi alsa-lib alsa-oss apr apr-util aspell aspell-en atk attica audiofile automoc4 babl boost cairo chmlib clucene db42 db44 dbus-glib dbus-python desktop-file-utils djvulibre ebook-tools eggdbus eigen2 enchant esound exiv2 expat fftw freetype fribidi fuse gamin gd gdbm gegl giflib glib glib2 glibc glibc-i18n glibc-profile gmime gmm gmp gnome-icon-theme gst-plugins-base gst-plugins-good gstreamer gtk+ gtk+2 gtkspell hal hal-info hicolor-icon-theme hunspell icon-naming-utils ilmbase imlib iso-codes jasper jre lcms lesstif libaio libao libarchive libart_lgpl libcaca libcap libcddb libcdio libdiscid libdvdread libexif libglade libgphoto2 libgpod libgsf libical libid3tag libidl libidn libieee1284 libiodbc libjpeg libkarma liblastfm libmad libmcrypt libmcs libmng libmowgli libmsn libmtp libnjb libnl libnotify libogg liboil libpng libraw1394 librsvg libsamplerate libspectre libtermcap libtheora libtiff libusb libvisual libvisual-plugins libvncserver libvorbis libwmf libwmf-docs libwnck libwpd libxklavier libxml2 libxslt libzip loudmouth lzo mhash mm mpfr ncurses neon netpbm notify-python openexr pango parted pcre phonon pil pilot-link polkit polkit-gnome poppler poppler-data popt pycairo pycups pygobject pygtk pyrex qca qca-cyrus-sasl qca-gnupg qca-ossl qimageblitz qt qtscriptgenerator raptor rasqal readline redland sdl seamonkey-solibs shared-desktop-ontologies shared-mime-info sip slang slang1 soprano startup-notification strigi svgalib system-config-printer t1lib taglib taglib-extras tango-icon-theme tango-icon-theme-extras urwid v4l-utils virtuoso-ose vte wavpack wv2 zlib \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/l/tagfile b/slackware64/l/tagfile index b7cb3cb4a..244282db8 100644 --- a/slackware64/l/tagfile +++ b/slackware64/l/tagfile @@ -1,3 +1,4 @@ +ConsoleKit:ADD M2Crypto:REC PyQt:REC QScintilla:REC @@ -10,6 +11,7 @@ apr-util:REC aspell:REC aspell-en:REC atk:REC +attica:ADD audiofile:REC automoc4:REC babl:REC @@ -23,11 +25,14 @@ dbus-glib:REC dbus-python:REC desktop-file-utils:REC djvulibre:REC +ebook-tools:ADD +eggdbus:ADD eigen2:REC enchant:REC esound:REC exiv2:REC expat:REC +fftw:REC freetype:REC fribidi:REC fuse:OPT @@ -35,6 +40,7 @@ gamin:REC gd:REC gdbm:REC gegl:REC +giflib:REC glib:REC glib2:REC glibc:REC @@ -45,6 +51,7 @@ gmm:REC gmp:REC gnome-icon-theme:REC gst-plugins-base:ADD +gst-plugins-good:ADD gstreamer:ADD gtk+:REC gtk+2:REC @@ -52,6 +59,7 @@ gtkspell:REC hal:REC hal-info:REC hicolor-icon-theme:REC +hunspell:ADD icon-naming-utils:REC ilmbase:REC imlib:REC @@ -68,20 +76,22 @@ libcaca:OPT libcap:REC libcddb:REC libcdio:REC +libdiscid:ADD libdvdread:REC libexif:REC libglade:REC libgphoto2:REC libgpod:REC libgsf:REC -libgtkhtml:REC libical:REC libid3tag:REC libidl:REC libidn:REC libieee1284:REC +libiodbc:ADD libjpeg:REC libkarma:REC +liblastfm:REC libmad:REC libmcrypt:REC libmcs:REC @@ -91,16 +101,17 @@ libmsn:REC libmtp:REC libnjb:REC libnl:REC +libnotify:REC libogg:REC liboil:REC libpng:REC libraw1394:REC librsvg:REC +libsamplerate:REC libspectre:REC libtermcap:REC libtheora:REC libtiff:REC -libungif:REC libusb:REC libvisual:REC libvisual-plugins:REC @@ -114,6 +125,7 @@ libxklavier:REC libxml2:REC libxslt:REC libzip:REC +loudmouth:OPT lzo:OPT mhash:REC mm:REC @@ -121,6 +133,7 @@ mpfr:REC ncurses:REC neon:REC netpbm:REC +notify-python:REC openexr:REC pango:REC parted:ADD @@ -128,6 +141,8 @@ pcre:REC phonon:REC pil:REC pilot-link:REC +polkit:ADD +polkit-gnome:ADD poppler:OPT poppler-data:OPT popt:REC @@ -149,6 +164,7 @@ readline:REC redland:REC sdl:REC seamonkey-solibs:REC +shared-desktop-ontologies:ADD shared-mime-info:REC sip:REC slang:REC @@ -157,12 +173,15 @@ soprano:REC startup-notification:ADD strigi:REC svgalib:REC +system-config-printer:ADD t1lib:REC taglib:REC taglib-extras:REC tango-icon-theme:REC tango-icon-theme-extras:REC urwid:REC +v4l-utils:REC +virtuoso-ose:ADD vte:REC wavpack:OPT wv2:REC diff --git a/slackware64/n/maketag b/slackware64/n/maketag index 5a085bab0..de973de05 100644 --- a/slackware64/n/maketag +++ b/slackware64/n/maketag @@ -15,10 +15,9 @@ Press ENTER when you are done." \ "autofs" "Linux automounter" "on" \ "biff+comsat" "Announces email delivery" "on" \ "bind" "Berkeley Internet Name Domain server" "on" \ +"bluez" "Bluetooth userspace (libs/utils) support" "on" \ "bluez-firmware" "Firmware for Bluetooth(TM) devices" "on" \ "bluez-hcidump" "Bluetooth(TM) network analyzer" "on" \ -"bluez-libs" "Libraries to support Bluetooth(TM)" "on" \ -"bluez-utils" "Utilities for Bluetooth(TM)" "on" \ "bootp" "Internet Bootstrap Protocol server" "on" \ "bridge-utils" "Tools for setting up Ethernet bridges" "on" \ "bsd-finger" "BSD finger daemon and client" "on" \ @@ -30,7 +29,7 @@ Press ENTER when you are done." \ "dirmngr" "Certificate Revocation Lists Manager for GPG" "on" \ "dnsmasq" "Small DNS/DHCP server for a LAN" "on" \ "elm" "Menu-driven user mail program" "on" \ -"epic4" "EPIC4 Internet Relay Chat (IRC) client" "on" \ +"epic5" "EPIC Internet Relay Chat (IRC) client" "on" \ "ethtool" "A tool for configuring Ethernet devices" "on" \ "fetchmail" "Fetch mail from POP/IMAP/ETRN servers" "on" \ "getmail" "POP3 mail retrieval tool" "on" \ @@ -52,10 +51,12 @@ Press ENTER when you are done." \ "ipw2200-fw" "Firmware for Intel ipw2200 wireless." "on" \ "irssi" "IRSSI Internet Relay Chat (IRC) client" "on" \ "iw" "Utility for mac80211 based wireless devices" "on" \ +"iwlwifi-1000-ucode" "Microcode for Intel 1000 wireless chips." "on" \ "iwlwifi-3945-ucode" "Microcode for Intel 3945 wireless chips." "on" \ "iwlwifi-4965-ucode" "Microcode for Intel 4965 wireless chips." "on" \ "iwlwifi-5000-ucode" "Microcode for Intel 5000 wireless chips." "on" \ "iwlwifi-5150-ucode" "Microcode for Intel 5150 wireless chips." "on" \ +"iwlwifi-6000-ucode" "Microcode for Intel 6000 wireless chips." "on" \ "lftp" "Shell-like FTP and HTTP transfer program" "on" \ "libassuan" "Interprocess Communication Library for GPG" "on" \ "libgcrypt" "General purpose crypto library" "on" \ @@ -92,6 +93,8 @@ Press ENTER when you are done." \ "nmap" "Network scanning utility" "on" \ "nn" "The NN news reader" "on" \ "ntp" "Network Time Protocol" "on" \ +"obex-data-server" "Obex D-Bus Service Support" "on" \ +"obexfs" "FUSE filesystem for mounting over ObexFTP" "on" \ "obexftp" "Object Exchange FTP client/server" "on" \ "openldap-client" "LDAP authentication libraries" "on" \ "openobex" "Object Exchange protocol library" "on" \ @@ -111,6 +114,8 @@ Press ENTER when you are done." \ "rdist" "Remote file distribution utility" "on" \ "rp-pppoe" "Connect to ADSL ISPs that use PPPoE" "on" \ "rsync" "Enhanced replacement for rcp" "on" \ +"rt2860-firmware" "Firmware for rt2860 PCI wireless cards." "on" \ +"rt2870-firmware" "Firmware for rt2870 USB wireless cards." "on" \ "rt61-firmware" "Firmware for rt61 wireless cards." "on" \ "rt71w-firmware" "Firmware for rt71w wireless cards." "on" \ "samba" "SMB print/file server for Windows LANs" "on" \ @@ -141,7 +146,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -alpine autofs biff+comsat bind bluez-firmware bluez-hcidump bluez-libs bluez-utils bootp bridge-utils bsd-finger crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic4 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo imapd inetd iproute2 iptables iptraf iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rp-pppoe rsync rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \ +alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo imapd inetd iproute2 iptables iptraf iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rp-pppoe rsync rt2860-firmware rt2870-firmware rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -149,7 +154,7 @@ alpine autofs biff+comsat bind bluez-firmware bluez-hcidump bluez-libs bluez-uti fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -alpine autofs biff+comsat bind bluez-firmware bluez-hcidump bluez-libs bluez-utils bootp bridge-utils bsd-finger crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic4 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo imapd inetd iproute2 iptables iptraf iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rp-pppoe rsync rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \ +alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo imapd inetd iproute2 iptables iptraf iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rp-pppoe rsync rt2860-firmware rt2870-firmware rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/n/maketag.ez b/slackware64/n/maketag.ez index 5a085bab0..de973de05 100644 --- a/slackware64/n/maketag.ez +++ b/slackware64/n/maketag.ez @@ -15,10 +15,9 @@ Press ENTER when you are done." \ "autofs" "Linux automounter" "on" \ "biff+comsat" "Announces email delivery" "on" \ "bind" "Berkeley Internet Name Domain server" "on" \ +"bluez" "Bluetooth userspace (libs/utils) support" "on" \ "bluez-firmware" "Firmware for Bluetooth(TM) devices" "on" \ "bluez-hcidump" "Bluetooth(TM) network analyzer" "on" \ -"bluez-libs" "Libraries to support Bluetooth(TM)" "on" \ -"bluez-utils" "Utilities for Bluetooth(TM)" "on" \ "bootp" "Internet Bootstrap Protocol server" "on" \ "bridge-utils" "Tools for setting up Ethernet bridges" "on" \ "bsd-finger" "BSD finger daemon and client" "on" \ @@ -30,7 +29,7 @@ Press ENTER when you are done." \ "dirmngr" "Certificate Revocation Lists Manager for GPG" "on" \ "dnsmasq" "Small DNS/DHCP server for a LAN" "on" \ "elm" "Menu-driven user mail program" "on" \ -"epic4" "EPIC4 Internet Relay Chat (IRC) client" "on" \ +"epic5" "EPIC Internet Relay Chat (IRC) client" "on" \ "ethtool" "A tool for configuring Ethernet devices" "on" \ "fetchmail" "Fetch mail from POP/IMAP/ETRN servers" "on" \ "getmail" "POP3 mail retrieval tool" "on" \ @@ -52,10 +51,12 @@ Press ENTER when you are done." \ "ipw2200-fw" "Firmware for Intel ipw2200 wireless." "on" \ "irssi" "IRSSI Internet Relay Chat (IRC) client" "on" \ "iw" "Utility for mac80211 based wireless devices" "on" \ +"iwlwifi-1000-ucode" "Microcode for Intel 1000 wireless chips." "on" \ "iwlwifi-3945-ucode" "Microcode for Intel 3945 wireless chips." "on" \ "iwlwifi-4965-ucode" "Microcode for Intel 4965 wireless chips." "on" \ "iwlwifi-5000-ucode" "Microcode for Intel 5000 wireless chips." "on" \ "iwlwifi-5150-ucode" "Microcode for Intel 5150 wireless chips." "on" \ +"iwlwifi-6000-ucode" "Microcode for Intel 6000 wireless chips." "on" \ "lftp" "Shell-like FTP and HTTP transfer program" "on" \ "libassuan" "Interprocess Communication Library for GPG" "on" \ "libgcrypt" "General purpose crypto library" "on" \ @@ -92,6 +93,8 @@ Press ENTER when you are done." \ "nmap" "Network scanning utility" "on" \ "nn" "The NN news reader" "on" \ "ntp" "Network Time Protocol" "on" \ +"obex-data-server" "Obex D-Bus Service Support" "on" \ +"obexfs" "FUSE filesystem for mounting over ObexFTP" "on" \ "obexftp" "Object Exchange FTP client/server" "on" \ "openldap-client" "LDAP authentication libraries" "on" \ "openobex" "Object Exchange protocol library" "on" \ @@ -111,6 +114,8 @@ Press ENTER when you are done." \ "rdist" "Remote file distribution utility" "on" \ "rp-pppoe" "Connect to ADSL ISPs that use PPPoE" "on" \ "rsync" "Enhanced replacement for rcp" "on" \ +"rt2860-firmware" "Firmware for rt2860 PCI wireless cards." "on" \ +"rt2870-firmware" "Firmware for rt2870 USB wireless cards." "on" \ "rt61-firmware" "Firmware for rt61 wireless cards." "on" \ "rt71w-firmware" "Firmware for rt71w wireless cards." "on" \ "samba" "SMB print/file server for Windows LANs" "on" \ @@ -141,7 +146,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -alpine autofs biff+comsat bind bluez-firmware bluez-hcidump bluez-libs bluez-utils bootp bridge-utils bsd-finger crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic4 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo imapd inetd iproute2 iptables iptraf iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rp-pppoe rsync rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \ +alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo imapd inetd iproute2 iptables iptraf iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rp-pppoe rsync rt2860-firmware rt2870-firmware rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -149,7 +154,7 @@ alpine autofs biff+comsat bind bluez-firmware bluez-hcidump bluez-libs bluez-uti fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -alpine autofs biff+comsat bind bluez-firmware bluez-hcidump bluez-libs bluez-utils bootp bridge-utils bsd-finger crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic4 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo imapd inetd iproute2 iptables iptraf iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rp-pppoe rsync rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \ +alpine autofs biff+comsat bind bluez bluez-firmware bluez-hcidump bootp bridge-utils bsd-finger crda curl cyrus-sasl dhcp dhcpcd dirmngr dnsmasq elm epic5 ethtool fetchmail getmail gnupg gnupg2 gnutls gpa gpgme htdig httpd icmpinfo imapd inetd iproute2 iptables iptraf iputils ipw2100-fw ipw2200-fw irssi iw iwlwifi-1000-ucode iwlwifi-3945-ucode iwlwifi-4965-ucode iwlwifi-5000-ucode iwlwifi-5150-ucode iwlwifi-6000-ucode lftp libassuan libgcrypt libgpg-error libksba links lynx mailx mcabber metamail mtr mutt nc ncftp net-snmp net-tools netatalk netdate netkit-bootparamd netkit-ftp netkit-ntalk netkit-routed netkit-rsh netkit-rusers netkit-rwall netkit-rwho netkit-timed netpipes netwatch network-scripts netwrite newspost nfs-utils nmap nn ntp obex-data-server obexfs obexftp openldap-client openobex openssh openssl openvpn php pidentd pinentry popa3d portmap ppp procmail proftpd pssh pth rdist rp-pppoe rsync rt2860-firmware rt2870-firmware rt61-firmware rt71w-firmware samba sendmail sendmail-cf slrn snownews stunnel tcp_wrappers tcpdump telnet tftp-hpa tin traceroute trn uucp vlan vsftpd wget whois wireless-tools wpa_supplicant yptools ytalk zd1211-firmware \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/n/tagfile b/slackware64/n/tagfile index 3506c1cb1..cd87de84d 100644 --- a/slackware64/n/tagfile +++ b/slackware64/n/tagfile @@ -2,10 +2,9 @@ alpine:OPT autofs:OPT biff+comsat:OPT bind:REC +bluez:ADD bluez-firmware:ADD bluez-hcidump:ADD -bluez-libs:ADD -bluez-utils:ADD bootp:OPT bridge-utils:OPT bsd-finger:OPT @@ -17,7 +16,7 @@ dhcpcd:REC dirmngr:REC dnsmasq:OPT elm:OPT -epic4:OPT +epic5:OPT ethtool:OPT fetchmail:OPT getmail:REC @@ -39,10 +38,12 @@ ipw2100-fw:ADD ipw2200-fw:ADD irssi:OPT iw:REC +iwlwifi-1000-ucode:ADD iwlwifi-3945-ucode:ADD iwlwifi-4965-ucode:ADD iwlwifi-5000-ucode:ADD iwlwifi-5150-ucode:ADD +iwlwifi-6000-ucode:ADD lftp:OPT libassuan:REC libgcrypt:REC @@ -79,6 +80,8 @@ nfs-utils:OPT nmap:OPT nn:OPT ntp:OPT +obex-data-server:REC +obexfs:REC obexftp:REC openldap-client:REC openobex:REC @@ -98,6 +101,8 @@ pth:REC rdist:OPT rp-pppoe:OPT rsync:OPT +rt2860-firmware:ADD +rt2870-firmware:ADD rt61-firmware:ADD rt71w-firmware:ADD samba:OPT diff --git a/slackware64/x/maketag b/slackware64/x/maketag index f013ef612..5b8548da0 100644 --- a/slackware64/x/maketag +++ b/slackware64/x/maketag @@ -79,7 +79,6 @@ Press ENTER when you are done." \ "inputproto" "Prototype files (.h, .pc) for X" "on" \ "intel-gpu-tools" "Intel DRM driver testing tools" "on" \ "kbproto" "Prototype files (.h, .pc) for X" "on" \ -"lbxproxy" "Low BandWidth X proxy" "on" \ "libFS" "libFS is a library for X" "on" \ "libICE" "libICE is a library for X" "on" \ "libSM" "libSM is a library for X" "on" \ @@ -120,7 +119,6 @@ Press ENTER when you are done." \ "liberation-fonts-ttf" "Liberation Fonts TrueType fonts" "on" \ "libfontenc" "libfontenc is a library for X" "on" \ "libhangul" "Hangul keyboard input library" "on" \ -"liblbxutil" "liblbxutil is a library for X" "on" \ "libpciaccess" "PCI access library for X" "on" \ "libpthread-stubs" "libpthread-stubs is a library for X" "on" \ "libxcb" "libxcb is a library for X" "on" \ @@ -138,7 +136,6 @@ Press ENTER when you are done." \ "oclock" "A clock widget for the X desktop" "on" \ "pixman" "Low-level pixel manipulation library" "on" \ "printproto" "Prototype files (.h, .pc) for X" "on" \ -"proxymngr" "proxy manager service" "on" \ "randrproto" "Prototype files (.h, .pc) for X" "on" \ "recordproto" "Prototype files (.h, .pc) for X" "on" \ "rendercheck" "simple tests of the X Render extension" "on" \ @@ -200,19 +197,15 @@ Press ENTER when you are done." \ "xeyes" "Desktop eyes that follow the mouse" "on" \ "xf86-input-acecad" "acecad input driver for X" "on" \ "xf86-input-aiptek" "aiptek input driver for X" "on" \ -"xf86-input-citron" "citron input driver for X" "on" \ -"xf86-input-elographics" "elographics input driver for X" "on" \ "xf86-input-evdev" "evdev input driver for X" "on" \ -"xf86-input-fpit" "fpit input driver for X" "on" \ -"xf86-input-hyperpen" "hyperpen input driver for X" "on" \ "xf86-input-joystick" "joystick input driver for X" "on" \ "xf86-input-keyboard" "keyboard input driver for X" "on" \ "xf86-input-mouse" "mouse input driver for X" "on" \ -"xf86-input-mutouch" "mutouch input driver for X" "on" \ "xf86-input-penmount" "penmount input driver for X" "on" \ "xf86-input-synaptics" "Synaptics touchpad input driver for X" "on" \ "xf86-input-vmmouse" "vmmouse input driver for X" "on" \ "xf86-input-void" "void input driver for X" "on" \ +"xf86-input-wacom" "wacom input driver for X" "on" \ "xf86-video-apm" "apm video driver for X" "on" \ "xf86-video-ark" "ark video driver for X" "on" \ "xf86-video-ast" "ast video driver for X" "on" \ @@ -227,7 +220,7 @@ Press ENTER when you are done." \ "xf86-video-mach64" "ATI Mach64 video driver for X" "on" \ "xf86-video-mga" "mga video driver for X" "on" \ "xf86-video-neomagic" "neomagic video driver for X" "on" \ -"xf86-video-newport" "newport video driver for X" "on" \ +"xf86-video-nouveau" "blacklist the experimental nouveau driver" "on" \ "xf86-video-nv" "nv video driver for X" "on" \ "xf86-video-openchrome" "VIA UniChrome video driver for X" "on" \ "xf86-video-r128" "ATI Rage128 video driver for X" "on" \ @@ -247,6 +240,7 @@ Press ENTER when you are done." \ "xf86-video-vesa" "vesa video driver for X" "on" \ "xf86-video-vmware" "vmware video driver for X" "on" \ "xf86-video-voodoo" "voodoo video driver for X" "on" \ +"xf86-video-xgi" "xgi video driver for X" "on" \ "xf86bigfontproto" "Prototype files (.h, .pc) for X" "on" \ "xf86dga" "test program for the XFree86-DGA extension" "on" \ "xf86dgaproto" "Prototype files (.h, .pc) for X" "on" \ @@ -320,7 +314,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto lbxproxy libFS libICE libSM libX11 libXScrnSaver libXTrap libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXprintAppUtil libXprintUtil libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul liblbxutil libpciaccess libpthread-stubs libxcb libxkbfile libxkbui listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto proxymngr randrproto recordproto rendercheck renderproto resourceproto rgb rstart sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf trapproto ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-citron xf86-input-elographics xf86-input-evdev xf86-input-fpit xf86-input-hyperpen xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-mutouch xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-newport xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86rushproto xf86vidmodeproto xfd xfindproxy xfontsel xfs xfsinfo xfwp xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xplsprinters xpr xprehashprinterlist xprop xproto xproxymanagementprotocol xpyb xrandr xrdb xrefresh xscope xset xsetmode xsetpointer xsetroot xsm xstdcmap xterm xtrans xtrap xvidtune xvinfo xwd xwininfo xwud \ +anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXTrap libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXprintAppUtil libXprintUtil libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile libxkbui listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto randrproto recordproto rendercheck renderproto resourceproto rgb rstart sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf trapproto ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86rushproto xf86vidmodeproto xfd xfindproxy xfontsel xfs xfsinfo xfwp xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xplsprinters xpr xprehashprinterlist xprop xproto xproxymanagementprotocol xpyb xrandr xrdb xrefresh xscope xset xsetmode xsetpointer xsetroot xsm xstdcmap xterm xtrans xtrap xvidtune xvinfo xwd xwininfo xwud \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -328,7 +322,7 @@ anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto dama fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto lbxproxy libFS libICE libSM libX11 libXScrnSaver libXTrap libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXprintAppUtil libXprintUtil libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul liblbxutil libpciaccess libpthread-stubs libxcb libxkbfile libxkbui listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto proxymngr randrproto recordproto rendercheck renderproto resourceproto rgb rstart sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf trapproto ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-citron xf86-input-elographics xf86-input-evdev xf86-input-fpit xf86-input-hyperpen xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-mutouch xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-newport xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86rushproto xf86vidmodeproto xfd xfindproxy xfontsel xfs xfsinfo xfwp xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xplsprinters xpr xprehashprinterlist xprop xproto xproxymanagementprotocol xpyb xrandr xrdb xrefresh xscope xset xsetmode xsetpointer xsetroot xsm xstdcmap xterm xtrans xtrap xvidtune xvinfo xwd xwininfo xwud \ +anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXTrap libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXprintAppUtil libXprintUtil libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile libxkbui listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto randrproto recordproto rendercheck renderproto resourceproto rgb rstart sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf trapproto ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86rushproto xf86vidmodeproto xfd xfindproxy xfontsel xfs xfsinfo xfwp xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xplsprinters xpr xprehashprinterlist xprop xproto xproxymanagementprotocol xpyb xrandr xrdb xrefresh xscope xset xsetmode xsetpointer xsetroot xsm xstdcmap xterm xtrans xtrap xvidtune xvinfo xwd xwininfo xwud \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/x/maketag.ez b/slackware64/x/maketag.ez index f013ef612..5b8548da0 100644 --- a/slackware64/x/maketag.ez +++ b/slackware64/x/maketag.ez @@ -79,7 +79,6 @@ Press ENTER when you are done." \ "inputproto" "Prototype files (.h, .pc) for X" "on" \ "intel-gpu-tools" "Intel DRM driver testing tools" "on" \ "kbproto" "Prototype files (.h, .pc) for X" "on" \ -"lbxproxy" "Low BandWidth X proxy" "on" \ "libFS" "libFS is a library for X" "on" \ "libICE" "libICE is a library for X" "on" \ "libSM" "libSM is a library for X" "on" \ @@ -120,7 +119,6 @@ Press ENTER when you are done." \ "liberation-fonts-ttf" "Liberation Fonts TrueType fonts" "on" \ "libfontenc" "libfontenc is a library for X" "on" \ "libhangul" "Hangul keyboard input library" "on" \ -"liblbxutil" "liblbxutil is a library for X" "on" \ "libpciaccess" "PCI access library for X" "on" \ "libpthread-stubs" "libpthread-stubs is a library for X" "on" \ "libxcb" "libxcb is a library for X" "on" \ @@ -138,7 +136,6 @@ Press ENTER when you are done." \ "oclock" "A clock widget for the X desktop" "on" \ "pixman" "Low-level pixel manipulation library" "on" \ "printproto" "Prototype files (.h, .pc) for X" "on" \ -"proxymngr" "proxy manager service" "on" \ "randrproto" "Prototype files (.h, .pc) for X" "on" \ "recordproto" "Prototype files (.h, .pc) for X" "on" \ "rendercheck" "simple tests of the X Render extension" "on" \ @@ -200,19 +197,15 @@ Press ENTER when you are done." \ "xeyes" "Desktop eyes that follow the mouse" "on" \ "xf86-input-acecad" "acecad input driver for X" "on" \ "xf86-input-aiptek" "aiptek input driver for X" "on" \ -"xf86-input-citron" "citron input driver for X" "on" \ -"xf86-input-elographics" "elographics input driver for X" "on" \ "xf86-input-evdev" "evdev input driver for X" "on" \ -"xf86-input-fpit" "fpit input driver for X" "on" \ -"xf86-input-hyperpen" "hyperpen input driver for X" "on" \ "xf86-input-joystick" "joystick input driver for X" "on" \ "xf86-input-keyboard" "keyboard input driver for X" "on" \ "xf86-input-mouse" "mouse input driver for X" "on" \ -"xf86-input-mutouch" "mutouch input driver for X" "on" \ "xf86-input-penmount" "penmount input driver for X" "on" \ "xf86-input-synaptics" "Synaptics touchpad input driver for X" "on" \ "xf86-input-vmmouse" "vmmouse input driver for X" "on" \ "xf86-input-void" "void input driver for X" "on" \ +"xf86-input-wacom" "wacom input driver for X" "on" \ "xf86-video-apm" "apm video driver for X" "on" \ "xf86-video-ark" "ark video driver for X" "on" \ "xf86-video-ast" "ast video driver for X" "on" \ @@ -227,7 +220,7 @@ Press ENTER when you are done." \ "xf86-video-mach64" "ATI Mach64 video driver for X" "on" \ "xf86-video-mga" "mga video driver for X" "on" \ "xf86-video-neomagic" "neomagic video driver for X" "on" \ -"xf86-video-newport" "newport video driver for X" "on" \ +"xf86-video-nouveau" "blacklist the experimental nouveau driver" "on" \ "xf86-video-nv" "nv video driver for X" "on" \ "xf86-video-openchrome" "VIA UniChrome video driver for X" "on" \ "xf86-video-r128" "ATI Rage128 video driver for X" "on" \ @@ -247,6 +240,7 @@ Press ENTER when you are done." \ "xf86-video-vesa" "vesa video driver for X" "on" \ "xf86-video-vmware" "vmware video driver for X" "on" \ "xf86-video-voodoo" "voodoo video driver for X" "on" \ +"xf86-video-xgi" "xgi video driver for X" "on" \ "xf86bigfontproto" "Prototype files (.h, .pc) for X" "on" \ "xf86dga" "test program for the XFree86-DGA extension" "on" \ "xf86dgaproto" "Prototype files (.h, .pc) for X" "on" \ @@ -320,7 +314,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto lbxproxy libFS libICE libSM libX11 libXScrnSaver libXTrap libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXprintAppUtil libXprintUtil libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul liblbxutil libpciaccess libpthread-stubs libxcb libxkbfile libxkbui listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto proxymngr randrproto recordproto rendercheck renderproto resourceproto rgb rstart sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf trapproto ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-citron xf86-input-elographics xf86-input-evdev xf86-input-fpit xf86-input-hyperpen xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-mutouch xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-newport xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86rushproto xf86vidmodeproto xfd xfindproxy xfontsel xfs xfsinfo xfwp xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xplsprinters xpr xprehashprinterlist xprop xproto xproxymanagementprotocol xpyb xrandr xrdb xrefresh xscope xset xsetmode xsetpointer xsetroot xsm xstdcmap xterm xtrans xtrap xvidtune xvinfo xwd xwininfo xwud \ +anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXTrap libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXprintAppUtil libXprintUtil libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile libxkbui listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto randrproto recordproto rendercheck renderproto resourceproto rgb rstart sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf trapproto ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86rushproto xf86vidmodeproto xfd xfindproxy xfontsel xfs xfsinfo xfwp xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xplsprinters xpr xprehashprinterlist xprop xproto xproxymanagementprotocol xpyb xrandr xrdb xrefresh xscope xset xsetmode xsetpointer xsetroot xsm xstdcmap xterm xtrans xtrap xvidtune xvinfo xwd xwininfo xwud \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -328,7 +322,7 @@ anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto dama fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto lbxproxy libFS libICE libSM libX11 libXScrnSaver libXTrap libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXprintAppUtil libXprintUtil libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul liblbxutil libpciaccess libpthread-stubs libxcb libxkbfile libxkbui listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto proxymngr randrproto recordproto rendercheck renderproto resourceproto rgb rstart sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf trapproto ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-citron xf86-input-elographics xf86-input-evdev xf86-input-fpit xf86-input-hyperpen xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-mutouch xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-newport xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86rushproto xf86vidmodeproto xfd xfindproxy xfontsel xfs xfsinfo xfwp xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xplsprinters xpr xprehashprinterlist xprop xproto xproxymanagementprotocol xpyb xrandr xrdb xrefresh xscope xset xsetmode xsetpointer xsetroot xsm xstdcmap xterm xtrans xtrap xvidtune xvinfo xwd xwininfo xwud \ +anthy appres bdftopcf beforelight bigreqsproto bitmap compiz compositeproto damageproto dejavu-fonts-ttf dmxproto dri2proto editres encodings evieext fixesproto font-adobe-100dpi font-adobe-75dpi font-adobe-utopia-100dpi font-adobe-utopia-75dpi font-adobe-utopia-type1 font-alias font-arabic-misc font-bh-100dpi font-bh-75dpi font-bh-lucidatypewriter-100dpi font-bh-lucidatypewriter-75dpi font-bh-ttf font-bh-type1 font-bitstream-100dpi font-bitstream-75dpi font-bitstream-speedo font-bitstream-type1 font-cronyx-cyrillic font-cursor-misc font-daewoo-misc font-dec-misc font-ibm-type1 font-isas-misc font-jis-misc font-micro-misc font-misc-cyrillic font-misc-ethiopic font-misc-meltho font-misc-misc font-mutt-misc font-schumacher-misc font-screen-cyrillic font-sony-misc font-sun-misc font-util font-winitzki-cyrillic font-xfree86-type1 fontcacheproto fontconfig fontsproto fonttosfnt fslsfonts fstobdf gccmakedep glew glproto iceauth ico imake inputproto intel-gpu-tools kbproto libFS libICE libSM libX11 libXScrnSaver libXTrap libXau libXaw libXcomposite libXcursor libXdamage libXdmcp libXevie libXext libXfixes libXfont libXfontcache libXft libXi libXinerama libXmu libXp libXpm libXprintAppUtil libXprintUtil libXrandr libXrender libXres libXt libXtst libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libdmx libdrm liberation-fonts-ttf libfontenc libhangul libpciaccess libpthread-stubs libxcb libxkbfile libxkbui listres lndir luit m17n-lib makedepend mesa mkcomposecache mkfontdir mkfontscale oclock pixman printproto randrproto recordproto rendercheck renderproto resourceproto rgb rstart sazanami-fonts-ttf scim scim-anthy scim-bridge scim-hangul scim-input-pad scim-m17n scim-pinyin scim-tables scripts scrnsaverproto sessreg setxkbmap showfont sinhala_lklug-font-ttf smproxy tibmachuni-font-ttf trapproto ttf-indic-fonts twm util-macros videoproto viewres wqy-zenhei-font-ttf x11-skel x11perf xauth xaw3d xbacklight xbiff xbitmaps xcalc xcb-proto xcb-util xclipboard xclock xcmiscproto xcmsdb xcompmgr xconsole xcursor-themes xcursorgen xdbedizzy xdg-utils xditview xdm xdpyinfo xdriinfo xedit xev xextproto xeyes xf86-input-acecad xf86-input-aiptek xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-penmount xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-apm xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-chips xf86-video-cirrus xf86-video-dummy xf86-video-glint xf86-video-i128 xf86-video-i740 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-radeonhd xf86-video-rendition xf86-video-s3 xf86-video-s3virge xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-sisusb xf86-video-tdfx xf86-video-tga xf86-video-trident xf86-video-tseng xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xf86-video-xgi xf86bigfontproto xf86dga xf86dgaproto xf86driproto xf86miscproto xf86rushproto xf86vidmodeproto xfd xfindproxy xfontsel xfs xfsinfo xfwp xgamma xgc xhost xineramaproto xinit xinput xkbcomp xkbevd xkbprint xkbutils xkeyboard-config xkill xload xlogo xlsatoms xlsclients xlsfonts xmag xman xmessage xmh xmodmap xmore xorg-cf-files xorg-docs xorg-server xorg-server-xephyr xorg-server-xnest xorg-server-xvfb xorg-sgml-doctools xplsprinters xpr xprehashprinterlist xprop xproto xproxymanagementprotocol xpyb xrandr xrdb xrefresh xscope xset xsetmode xsetpointer xsetroot xsm xstdcmap xterm xtrans xtrap xvidtune xvinfo xwd xwininfo xwud \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/x/tagfile b/slackware64/x/tagfile index 20abc6c6c..3cfa52c5c 100644 --- a/slackware64/x/tagfile +++ b/slackware64/x/tagfile @@ -66,7 +66,6 @@ imake:REC inputproto:REC intel-gpu-tools:ADD kbproto:REC -lbxproxy:REC libFS:REC libICE:REC libSM:REC @@ -107,7 +106,6 @@ libdrm:REC liberation-fonts-ttf:REC libfontenc:REC libhangul:REC -liblbxutil:REC libpciaccess:REC libpthread-stubs:REC libxcb:REC @@ -125,7 +123,6 @@ mkfontscale:REC oclock:REC pixman:REC printproto:REC -proxymngr:REC randrproto:REC recordproto:REC rendercheck:REC @@ -187,19 +184,15 @@ xextproto:REC xeyes:REC xf86-input-acecad:REC xf86-input-aiptek:REC -xf86-input-citron:REC -xf86-input-elographics:REC xf86-input-evdev:REC -xf86-input-fpit:REC -xf86-input-hyperpen:REC xf86-input-joystick:REC xf86-input-keyboard:REC xf86-input-mouse:REC -xf86-input-mutouch:REC xf86-input-penmount:REC xf86-input-synaptics:REC xf86-input-vmmouse:REC xf86-input-void:REC +xf86-input-wacom:REC xf86-video-apm:REC xf86-video-ark:REC xf86-video-ast:REC @@ -214,7 +207,7 @@ xf86-video-intel:REC xf86-video-mach64:REC xf86-video-mga:REC xf86-video-neomagic:REC -xf86-video-newport:REC +xf86-video-nouveau:REC xf86-video-nv:REC xf86-video-openchrome:REC xf86-video-r128:REC @@ -234,6 +227,7 @@ xf86-video-v4l:REC xf86-video-vesa:REC xf86-video-vmware:REC xf86-video-voodoo:REC +xf86-video-xgi:REC xf86bigfontproto:REC xf86dga:REC xf86dgaproto:REC diff --git a/slackware64/xap/maketag b/slackware64/xap/maketag index 2af6f34d4..53ec79d51 100644 --- a/slackware64/xap/maketag +++ b/slackware64/xap/maketag @@ -15,15 +15,16 @@ Press ENTER when you are done." \ "audacious" "A media player of the XMMS lineage" "on" \ "audacious-plugins" "Plugins for Audacious to support media types" "on" \ "blackbox" "Minimalist and fast window manager" "on" \ +"blueman" "Graphical Bluetooth manager" "on" \ "electricsheep" "A distributed screensaver program" "on" \ "fluxbox" "Window manager based on blackbox" "on" \ "fvwm" "FVWM window manager" "on" \ +"geeqie" "A lightweight picture viewing program" "on" \ "gftp" "A multithreaded FTP client" "on" \ "gimp" "GNU Image Manipulation Program" "on" \ "gkrellm" "Graphical system monitor utility" "on" \ "gnuchess" "Chess playing programs" "on" \ "gnuplot" "Gnuplot function plotting utility" "on" \ -"gqview" "A lightweight picture viewing program" "on" \ "gucharmap" "Unicode character map" "on" \ "gv" ".ps/.pdf viewer based on Ghostview" "on" \ "gxine" "Multimedia player (GTK+ user interface)" "on" \ @@ -44,6 +45,7 @@ Press ENTER when you are done." \ "x3270" "x3270 - IBM host access tool" "on" \ "xchat" "IRC client for X" "on" \ "xfce" "A lightweight desktop environment for X" "on" \ +"xfce4-notifyd" "xfce libnotify daemon" "on" \ "xfce4-power-manager" "Power Management daemon for Xfce" "on" \ "xfractint" "Fractint for X" "on" \ "xgames" "A collection of games for X" "on" \ @@ -62,7 +64,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -MPlayer audacious audacious-plugins blackbox electricsheep fluxbox fvwm gftp gimp gkrellm gnuchess gnuplot gqview gucharmap gv gxine imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xchat xfce xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \ +MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv gxine imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xchat xfce xfce4-notifyd xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -70,7 +72,7 @@ MPlayer audacious audacious-plugins blackbox electricsheep fluxbox fvwm gftp gim fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -MPlayer audacious audacious-plugins blackbox electricsheep fluxbox fvwm gftp gimp gkrellm gnuchess gnuplot gqview gucharmap gv gxine imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xchat xfce xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \ +MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv gxine imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xchat xfce xfce4-notifyd xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/xap/maketag.ez b/slackware64/xap/maketag.ez index 2af6f34d4..53ec79d51 100644 --- a/slackware64/xap/maketag.ez +++ b/slackware64/xap/maketag.ez @@ -15,15 +15,16 @@ Press ENTER when you are done." \ "audacious" "A media player of the XMMS lineage" "on" \ "audacious-plugins" "Plugins for Audacious to support media types" "on" \ "blackbox" "Minimalist and fast window manager" "on" \ +"blueman" "Graphical Bluetooth manager" "on" \ "electricsheep" "A distributed screensaver program" "on" \ "fluxbox" "Window manager based on blackbox" "on" \ "fvwm" "FVWM window manager" "on" \ +"geeqie" "A lightweight picture viewing program" "on" \ "gftp" "A multithreaded FTP client" "on" \ "gimp" "GNU Image Manipulation Program" "on" \ "gkrellm" "Graphical system monitor utility" "on" \ "gnuchess" "Chess playing programs" "on" \ "gnuplot" "Gnuplot function plotting utility" "on" \ -"gqview" "A lightweight picture viewing program" "on" \ "gucharmap" "Unicode character map" "on" \ "gv" ".ps/.pdf viewer based on Ghostview" "on" \ "gxine" "Multimedia player (GTK+ user interface)" "on" \ @@ -44,6 +45,7 @@ Press ENTER when you are done." \ "x3270" "x3270 - IBM host access tool" "on" \ "xchat" "IRC client for X" "on" \ "xfce" "A lightweight desktop environment for X" "on" \ +"xfce4-notifyd" "xfce libnotify daemon" "on" \ "xfce4-power-manager" "Power Management daemon for Xfce" "on" \ "xfractint" "Fractint for X" "on" \ "xgames" "A collection of games for X" "on" \ @@ -62,7 +64,7 @@ if [ $? = 1 -o $? = 255 ]; then rm -f $TMP/SeTpkgs > $TMP/SeTnewtag for pkg in \ -MPlayer audacious audacious-plugins blackbox electricsheep fluxbox fvwm gftp gimp gkrellm gnuchess gnuplot gqview gucharmap gv gxine imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xchat xfce xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \ +MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv gxine imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xchat xfce xfce4-notifyd xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \ ; do echo "$pkg: SKP" >> $TMP/SeTnewtag done @@ -70,7 +72,7 @@ MPlayer audacious audacious-plugins blackbox electricsheep fluxbox fvwm gftp gim fi cat /dev/null > $TMP/SeTnewtag for PACKAGE in \ -MPlayer audacious audacious-plugins blackbox electricsheep fluxbox fvwm gftp gimp gkrellm gnuchess gnuplot gqview gucharmap gv gxine imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xchat xfce xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \ +MPlayer audacious audacious-plugins blackbox blueman electricsheep fluxbox fvwm geeqie gftp gimp gkrellm gnuchess gnuplot gucharmap gv gxine imagemagick mozilla-firefox mozilla-thunderbird pan pidgin rdesktop rxvt sane seamonkey seyon thunar-volman vim-gvim windowmaker x11-ssh-askpass x3270 xchat xfce xfce4-notifyd xfce4-power-manager xfractint xgames xine-lib xine-ui xlockmore xmms xpaint xpdf xsane xscreensaver xv xxgdb \ ; do if fgrep \"$PACKAGE\" $TMP/SeTpkgs 1> /dev/null 2> /dev/null ; then echo "$PACKAGE: ADD" >> $TMP/SeTnewtag diff --git a/slackware64/xap/tagfile b/slackware64/xap/tagfile index 7ce8a84bf..dda9b2d85 100644 --- a/slackware64/xap/tagfile +++ b/slackware64/xap/tagfile @@ -2,15 +2,16 @@ MPlayer:OPT audacious:REC audacious-plugins:REC blackbox:OPT +blueman:ADD electricsheep:REC fluxbox:OPT fvwm:REC +geeqie:REC gftp:OPT gimp:REC gkrellm:OPT gnuchess:REC gnuplot:OPT -gqview:REC gucharmap:OPT gv:REC gxine:OPT @@ -31,6 +32,7 @@ x11-ssh-askpass:REC x3270:OPT xchat:OPT xfce:OPT +xfce4-notifyd:REC xfce4-power-manager:REC xfractint:OPT xgames:REC diff --git a/source/a/aaa_base/aaa_base.SlackBuild b/source/a/aaa_base/aaa_base.SlackBuild index 3d1a73051..d8c06b4af 100755 --- a/source/a/aaa_base/aaa_base.SlackBuild +++ b/source/a/aaa_base/aaa_base.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=13.0 -ARCH=${ARCH:-x86_64} +VERSION=13.1 BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-aaa_base diff --git a/source/a/aaa_base/slackware-version b/source/a/aaa_base/slackware-version index 0c779cf82..11bc56a49 100644 --- a/source/a/aaa_base/slackware-version +++ b/source/a/aaa_base/slackware-version @@ -1 +1 @@ -Slackware 13.0.0.0.0 +Slackware 13.1.0 diff --git a/source/a/aaa_elflibs/aaa_elflibs.SlackBuild b/source/a/aaa_elflibs/aaa_elflibs.SlackBuild index fd5ade86f..10bd02ce0 100755 --- a/source/a/aaa_elflibs/aaa_elflibs.SlackBuild +++ b/source/a/aaa_elflibs/aaa_elflibs.SlackBuild @@ -1,5 +1,5 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,18 @@ PKGNAM=aaa_elflibs -VERSION=${VERSION:-13.0} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-13.1} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" diff --git a/source/a/aaa_elflibs/symlinks-to-tracked-libs b/source/a/aaa_elflibs/symlinks-to-tracked-libs index b8c2c758a..29c8bcc11 100644 --- a/source/a/aaa_elflibs/symlinks-to-tracked-libs +++ b/source/a/aaa_elflibs/symlinks-to-tracked-libs @@ -8,6 +8,7 @@ /lib/libgpm.so.1 /lib/libncurses.so.5 /lib/libncursesw.so.5 +/lib/libpopt.so.0 /lib/libsysfs.so.2 /lib/libtermcap.so.2 /usr/lib/libasound.so.2 @@ -24,15 +25,21 @@ /usr/lib/libglib-2.0.so.0 /usr/lib/libgmodule-2.0.so.0 /usr/lib/libgmp.so.3 +/usr/lib/libgmp.so.10 /usr/lib/libgmpxx.so.3 +/usr/lib/libgmpxx.so.4 /usr/lib/libgobject-2.0.so.0 /usr/lib/libgthread-2.0.so.0 /usr/lib/libhistory.so.4 /usr/lib/libhistory.so.5 /usr/lib/libidn.so.11 /usr/lib/libjpeg.so.62 +/usr/lib/libjpeg.so.8 /usr/lib/liblber-2.3.so.0 +/usr/lib/liblber-2.4.so.2 /usr/lib/libldap-2.3.so.0 +/usr/lib/libldap-2.4.so.2 +/usr/lib/libltdl.so.3 /usr/lib/libmenu.so.5 /usr/lib/libmenuw.so.5 /usr/lib/libmm.so.14 @@ -42,14 +49,16 @@ /usr/lib/libpcre.so.0 /usr/lib/libpcreposix.so.0 /usr/lib/libpng.so.3 +/usr/lib/libpng.so.14 /usr/lib/libpng12.so.0 -/usr/lib/libpopt.so.0 +/usr/lib/libpng14.so.14 /usr/lib/libreadline.so.4 /usr/lib/libreadline.so.5 /usr/lib/libslang.so.1 /usr/lib/libslang.so.2 /usr/lib/libtiff.so.3 /usr/lib/libusb-0.1.so.4 +/usr/lib/libusb-1.0.so.0 /usr/lib/libvga.so.1 /usr/lib/libvgagl.so.1 /usr/lib/libz.so.1 diff --git a/source/a/acpid/acpid.SlackBuild b/source/a/acpid/acpid.SlackBuild index 3010e0136..cb4831385 100755 --- a/source/a/acpid/acpid.SlackBuild +++ b/source/a/acpid/acpid.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.0.8 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo acpid-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j8} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -42,33 +53,37 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -make || exit 1 -strip acpid acpi_listen -mkdir -p $PKG/usr/sbin -cat acpid > $PKG/usr/sbin/acpid -chmod 755 $PKG/usr/sbin/acpid -mkdir -p $PKG/usr/bin -cat acpi_listen > $PKG/usr/bin/acpi_listen -chmod 755 $PKG/usr/bin/acpi_listen -mkdir -p $PKG/usr/man/man8 -cat acpid.8 | gzip -9c > $PKG/usr/man/man8/acpid.8.gz -cat acpi_listen.8 | gzip -9c > $PKG/usr/man/man8/acpi_listen.8.gz -mkdir -p $PKG/usr/doc/acpid-$VERSION -cp -a Changelog README \ - $PKG/usr/doc/acpid-$VERSION -cp -a samples $PKG/usr/doc/acpid-$VERSION +make install \ + OPT="-O2" \ + PREFIX=/usr \ + MANDIR=/usr/man \ + DOCDIR=/usr/doc/acpid-$VERSION \ + DESTDIR=$PKG \ + || exit 1 + +strip --strip-unneeded $PKG/usr/bin/acpi_listen $PKG/usr/sbin/acpid + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/etc/acpi/events zcat $CWD/acpi_handler.sh.gz > $PKG/etc/acpi/acpi_handler.sh.new -chmod 755 $PKG/etc/acpi/acpi_handler.sh.new +chmod 0755 $PKG/etc/acpi/acpi_handler.sh.new zcat $CWD/default.gz > $PKG/etc/acpi/events/default + mkdir -p $PKG/etc/rc.d zcat $CWD/rc.acpid.gz > $PKG/etc/rc.d/rc.acpid -chmod 755 $PKG/etc/rc.d/rc.acpid +chmod 0755 $PKG/etc/rc.d/rc.acpid + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh -# Build the package: cd $PKG /sbin/makepkg -l y -c n $TMP/acpid-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/acpid/doinst.sh b/source/a/acpid/doinst.sh index c090b9fe5..dfc78d656 100644 --- a/source/a/acpid/doinst.sh +++ b/source/a/acpid/doinst.sh @@ -1,11 +1,11 @@ -#!/bin/sh config() { NEW="$1" - OLD="`dirname $NEW`/`basename $NEW .new`" + OLD="$(dirname $NEW)/$(basename $NEW .new)" # If there's no config file by that name, mv it over: if [ ! -r $OLD ]; then mv $NEW $OLD - elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy rm $NEW fi # Otherwise, we leave the .new copy for the admin to consider... diff --git a/source/a/acpid/rc.acpid b/source/a/acpid/rc.acpid index 32486d17c..d6b74e881 100644 --- a/source/a/acpid/rc.acpid +++ b/source/a/acpid/rc.acpid @@ -11,7 +11,11 @@ acpid_start() { # Stop acpid: acpid_stop() { - killall acpid + if [ -r /var/run/acpid.pid ]; then + kill $(cat /var/run/acpid.pid) + else + killall acpid + fi } # Restart acpid: diff --git a/source/a/bash/bash-4.1-patches/bash41-001 b/source/a/bash/bash-4.1-patches/bash41-001 new file mode 100644 index 000000000..758e1fa40 --- /dev/null +++ b/source/a/bash/bash-4.1-patches/bash41-001 @@ -0,0 +1,48 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.1 +Patch-ID: bash41-001 + +Bug-Reported-by: Yann Rouillard <yann@pleiades.fr.eu.org> +Bug-Reference-ID: <4B44A410.4070107@pleiades.fr.eu.org> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2010-01/msg00018.html + +Bug-Description: + +A prototype for vsnprintf was incorrect, and caused compilation failures +on systems that did not have a suitable vsnprintf, but had a declaration in +one of the system header files. + +Patch (apply with `patch -p0'): + +*** ../bash-4.1-patched/builtins/printf.def 2009-11-20 15:31:23.000000000 -0500 +--- builtins/printf.def 2010-01-07 08:50:06.000000000 -0500 +*************** +*** 173,177 **** + + #if !HAVE_VSNPRINTF +! extern int vsnprintf __P((char *, size_t, const char *, ...)) __attribute__((__format__ (printf, 3, 4))); + #endif + +--- 173,177 ---- + + #if !HAVE_VSNPRINTF +! extern int vsnprintf __P((char *, size_t, const char *, va_list)) __attribute__((__format__ (printf, 3, 0))); + #endif + +*** ../bash-4.1-patched/patchlevel.h 2009-10-01 16:39:22.000000000 -0400 +--- patchlevel.h 2010-01-14 09:38:08.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 0 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 1 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/bash-4.1-patches/bash41-002 b/source/a/bash/bash-4.1-patches/bash41-002 new file mode 100644 index 000000000..a1151985c --- /dev/null +++ b/source/a/bash/bash-4.1-patches/bash41-002 @@ -0,0 +1,65 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.1 +Patch-ID: bash41-002 + +Bug-Reported-by: guillaume.outters@free.fr +Bug-Reference-ID: <20100105230441.70D171AA7F52@asterix.local> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2010-01/msg00017.html + +Bug-Description: + +Bash-4.1/Readline-6.1 introduced a hook function that allows applications +to rewrite or modify filenames read from the file system before comparing +them with a word to be completed. The converted filename, if it matches, +needs to be inserted into the line buffer, replacing the original contents. + +This fixes a completion bug on Mac OS X involving filenames containing +UTF-8 characters. + +Patch (apply with `patch -p0'): + +*** ../bash-4.1-patched/lib/readline/complete.c 2009-11-29 18:39:30.000000000 -0500 +--- lib/readline/complete.c 2010-01-06 08:30:23.000000000 -0500 +*************** +*** 2139,2143 **** + if (filename_len == 0) + { +! if (_rl_match_hidden_files == 0 && HIDDEN_FILE (entry->d_name)) + continue; + +--- 2139,2143 ---- + if (filename_len == 0) + { +! if (_rl_match_hidden_files == 0 && HIDDEN_FILE (convfn)) + continue; + +*************** +*** 2220,2224 **** + } + +! strcpy (temp + dirlen, entry->d_name); + } + else +--- 2220,2224 ---- + } + +! strcpy (temp + dirlen, convfn); + } + else +*** ../bash-4.1-patched/patchlevel.h 2009-10-01 16:39:22.000000000 -0400 +--- patchlevel.h 2010-01-14 09:38:08.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 1 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 2 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/bash-4.1-patches/bash41-003 b/source/a/bash/bash-4.1-patches/bash41-003 new file mode 100644 index 000000000..479fdcd9d --- /dev/null +++ b/source/a/bash/bash-4.1-patches/bash41-003 @@ -0,0 +1,48 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.1 +Patch-ID: bash41-003 + +Bug-Reported-by: coyote@wariat.org.pl +Bug-Reference-ID: <4b64a1f8.06e2660a.60af.4bfb@mx.google.com> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2010-01/msg00135.html + +Bug-Description: + +If command completion is attempted on a word with a quoted globbing +character (e.g., `*' or `?'), bash can reference a NULL pointer and +dump core. + +Patch (apply with `patch -p0'): + +*** ../bash-4.1-patched/bashline.c 2009-10-24 14:10:19.000000000 -0400 +--- bashline.c 2010-01-30 21:53:49.000000000 -0500 +*************** +*** 1681,1685 **** + characters in the common prefix are bad) will ever be returned on + regular completion. */ +! if (glob_pattern_p (hint)) + { + if (state == 0) +--- 1681,1685 ---- + characters in the common prefix are bad) will ever be returned on + regular completion. */ +! if (globpat) + { + if (state == 0) +*** ../bash-4.1-patched/patchlevel.h 2009-10-01 16:39:22.000000000 -0400 +--- patchlevel.h 2010-01-14 09:38:08.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 2 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 3 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/bash-4.1-patches/bash41-004 b/source/a/bash/bash-4.1-patches/bash41-004 new file mode 100644 index 000000000..33f79bb7c --- /dev/null +++ b/source/a/bash/bash-4.1-patches/bash41-004 @@ -0,0 +1,47 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.1 +Patch-ID: bash41-004 + +Bug-Reported-by: Crestez Dan Leonard <cdleonard@gmail.com> +Bug-Reference-ID: <1265592839.30682.21.camel@deskbox> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2010-02/msg00034.html + +Bug-Description: + +When running in Posix mode and executing a shell function without local +variables, bash will not propagate a variable in a special builtin's temporary +environment to have global scope. + +Patch (apply with `patch -p0'): + +*** ../bash-4.1-patched/variables.c 2009-11-03 14:13:58.000000000 -0500 +--- variables.c 2010-02-08 17:36:18.000000000 -0500 +*************** +*** 3809,3812 **** +--- 3809,3817 ---- + if (tempvar_p (var) && (posixly_correct || (var->attributes & att_propagate))) + { ++ /* Make sure we have a hash table to store the variable in while it is ++ being propagated down to the global variables table. Create one if ++ we have to */ ++ if ((vc_isfuncenv (shell_variables) || vc_istempenv (shell_variables)) && shell_variables->table == 0) ++ shell_variables->table = hash_create (0); + /* XXX - should we set v->context here? */ + v = bind_variable_internal (var->name, value_cell (var), shell_variables->table, 0, 0); +*** ../bash-4.1-patched/patchlevel.h 2009-10-01 16:39:22.000000000 -0400 +--- patchlevel.h 2010-01-14 09:38:08.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 3 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 4 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/bash-4.1-patches/bash41-005 b/source/a/bash/bash-4.1-patches/bash41-005 new file mode 100644 index 000000000..8a2fec8a3 --- /dev/null +++ b/source/a/bash/bash-4.1-patches/bash41-005 @@ -0,0 +1,56 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.1 +Patch-ID: bash41-005 + +Bug-Reported-by: werner@suse.de +Bug-Reference-ID: <201002251238.o1PCcYcg016893@boole.suse.de> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2010-02/msg00132.html + +Bug-Description: + +When the `read' builtin times out after the timeout specified with -t is +exceeded, it does not reset the flags that tell signal handlers to process +signals immediately instead of deferring their handling. This can result +in unsafe functions being called from signal handlers, which can cause bash +to hang or dump core. + +Patch (apply with `patch -p0'): + +*** ../bash-4.1-patched/builtins/read.def 2009-10-08 11:35:46.000000000 -0400 +--- builtins/read.def 2010-03-17 17:35:39.000000000 -0400 +*************** +*** 616,621 **** + zsyncfd (fd); + +- interrupt_immediately--; +- terminate_immediately--; + discard_unwind_frame ("read_builtin"); + +--- 616,619 ---- +*************** +*** 624,627 **** +--- 622,628 ---- + assign_vars: + ++ interrupt_immediately--; ++ terminate_immediately--; ++ + #if defined (ARRAY_VARS) + /* If -a was given, take the string read, break it into a list of words, +*** ../bash-4.1-patched/patchlevel.h 2009-10-01 16:39:22.000000000 -0400 +--- patchlevel.h 2010-01-14 09:38:08.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 4 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 5 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/bash-4.1-patches/bash41-006 b/source/a/bash/bash-4.1-patches/bash41-006 new file mode 100644 index 000000000..d6553b8bb --- /dev/null +++ b/source/a/bash/bash-4.1-patches/bash41-006 @@ -0,0 +1,76 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.1 +Patch-ID: bash41-006 + +Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> +Bug-Reference-ID: <201003210155.56618.vapier@gentoo.org> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2010-03/msg00063.html + +Bug-Description: + +Bash did not correctly print/reproduce here documents attached to commands +inside compound commands such as for and while. This affected the +execution of such commands inside a shell function when the function +definition is saved and later restored using `.' or `eval'. + +Patch (apply with `patch -p0'): + +*** ../bash-4.1-patched/print_cmd.c 2009-09-16 15:32:26.000000000 -0400 +--- print_cmd.c 2010-03-22 21:15:30.000000000 -0400 +*************** +*** 114,117 **** +--- 114,123 ---- + #define CHECK_XTRACE_FP xtrace_fp = (xtrace_fp ? xtrace_fp : stderr) + ++ #define PRINT_DEFERRED_HEREDOCS(x) \ ++ do { \ ++ if (deferred_heredocs) \ ++ print_deferred_heredocs (x); \ ++ } while (0) ++ + /* Non-zero means the stuff being printed is inside of a function def. */ + static int inside_function_def; +*************** +*** 561,571 **** + { + print_for_command_head (for_command); +- + cprintf (";"); + newline ("do\n"); + indentation += indentation_amount; + make_command_string_internal (for_command->action); + semicolon (); + indentation -= indentation_amount; + newline ("done"); + } +--- 566,578 ---- + { + print_for_command_head (for_command); + cprintf (";"); + newline ("do\n"); ++ + indentation += indentation_amount; + make_command_string_internal (for_command->action); ++ PRINT_DEFERRED_HEREDOCS (""); + semicolon (); + indentation -= indentation_amount; ++ + newline ("done"); + } +*** ../bash-4.1-patched/patchlevel.h 2009-10-01 16:39:22.000000000 -0400 +--- patchlevel.h 2010-01-14 09:38:08.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 5 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 6 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/bash-4.1-patches/bash41-007 b/source/a/bash/bash-4.1-patches/bash41-007 new file mode 100644 index 000000000..07b4796c4 --- /dev/null +++ b/source/a/bash/bash-4.1-patches/bash41-007 @@ -0,0 +1,47 @@ + BASH PATCH REPORT + ================= + +Bash-Release: 4.1 +Patch-ID: bash41-007 + +Bug-Reported-by: Rob Robason <rob@robason.net> +Bug-Reference-ID: <1269513145.22336.9.camel@home.robason.homelinux.net> +Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2010-03/msg00089.html + +Bug-Description: + +A typo caused bash to not honor a precision specification in a printf +format. + +Patch (apply with `patch -p0'): + +*** ../bash-4.1-patched/builtins/printf.def 2010-01-18 10:50:22.000000000 -0500 +--- builtins/printf.def 2010-03-25 09:40:56.000000000 -0400 +*************** +*** 118,122 **** + nw = vflag ? vbprintf (f, fieldwidth, func) : printf (f, fieldwidth, func); \ + else if (have_precision) \ +! nw = vflag ? vbprintf (f, precision, func) : printf (f, fieldwidth, func); \ + else \ + nw = vflag ? vbprintf (f, func) : printf (f, func); \ +--- 118,122 ---- + nw = vflag ? vbprintf (f, fieldwidth, func) : printf (f, fieldwidth, func); \ + else if (have_precision) \ +! nw = vflag ? vbprintf (f, precision, func) : printf (f, precision, func); \ + else \ + nw = vflag ? vbprintf (f, func) : printf (f, func); \ +*** ../bash-4.1-patched/patchlevel.h 2009-10-01 16:39:22.000000000 -0400 +--- patchlevel.h 2010-01-14 09:38:08.000000000 -0500 +*************** +*** 26,30 **** + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 6 + + #endif /* _PATCHLEVEL_H_ */ +--- 26,30 ---- + looks for to find the patch level (for the sccs version string). */ + +! #define PATCHLEVEL 7 + + #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/bash.SlackBuild b/source/a/bash/bash.SlackBuild index 04c8ff953..32ce9a40d 100755 --- a/source/a/bash/bash.SlackBuild +++ b/source/a/bash/bash.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,14 +20,26 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} - -CWD=$(pwd) -TMP=${TMP:-/tmp} +# Set initial variables: +CWD=`pwd` +if [ "$TMP" = "" ]; then + TMP=/tmp +fi PKG=$TMP/package-bash +VERSION=${VERSION:-$(echo bash-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i386" ]; then SLKCFLAGS="-O2 -march=i386 -mcpu=i686" elif [ "$ARCH" = "i486" ]; then @@ -36,52 +48,98 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi +if [ ! -d $TMP ]; then + mkdir -p $TMP # location to build the source +fi rm -rf $PKG -mkdir -p $TMP $PKG +mkdir -p $PKG # Determine bash patchlevel: -PATCHLEVEL=`( cd $CWD/patches ; /bin/ls *gz | tail -1 | cut -f 2 -d - | cut -f 1 -d . 2> /dev/null )` +PATCHLEVEL="$( cd $CWD/bash-${VERSION}-patches ; /bin/ls bash4?-??? | tail -1 | cut -f 2 -d - 2> /dev/null )" if [ "$PATCHLEVEL" = "" ]; then PATCHLEVEL=0 fi cd $TMP rm -rf bash-$VERSION -tar xzvf $CWD/bash-$VERSION.tar.gz || exit 1 -cd bash-$VERSION +tar xvf $CWD/bash-$VERSION.tar.?z* || exit 1 +cd bash-$VERSION || exit 1 chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -for patch in $CWD/patches/bash* ; do - zcat $patch | patch -p0 --verbose || exit 1 -done +find . -perm 664 | xargs chmod 644 +find . -perm 775 | xargs chmod 755 + +if [ -d $CWD/bash-${VERSION}-patches ]; then + ( cd $CWD/bash-${VERSION}-patches ; cat bash4?-??? ) | patch -p0 --verbose || exit 1 +fi + CFLAGS="$SLKCFLAGS" \ -./configure --prefix=/usr $ARCH-slackware-linux -make -j3 || exit 1 +./configure \ + --prefix=/usr \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --build=$ARCH-slackware-linux +make -j4 || make || exit 1 make install DESTDIR=$PKG +mv $PKG/usr/share/doc $PKG/usr mkdir -p $PKG/bin -mv $PKG/usr/bin/bash $PKG/bin/bash2.new -strip --strip-unneeded $PKG/bin/bash2.new +mv $PKG/usr/bin/bash $PKG/bin/bash4.new # We don't include the "bashbug" script. rm -rf $PKG/usr/bin $PKG/usr/man/man1/bashbug.1 -gzip -9 $PKG/usr/man/man1/* + +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +# bash.1 is already installed by "make install" +( cd doc + for page in builtins.1 rbash.1 ; do + cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz + done +) + +# Compress info files, if any: +if [ -d $PKG/usr/info ]; then + ( cd $PKG/usr/info + rm -f dir + gzip -9 * + ) +fi + mkdir -p $PKG/usr/doc/bash-$VERSION cp -a AUTHORS CHANGES COMPAT COPYING INSTALL MANIFEST NEWS NOTES \ - README Y2K doc/FAQ doc/INTRO $PKG/usr/doc/bash-$VERSION -cd doc -groff -ms -Tascii article.ms > $PKG/usr/doc/bash-$VERSION/article.txt -# bash.1 is already installed by "make install" -for page in builtins.1 rbash.1 ; do - cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz -done -rm -f $PKG/usr/info/dir -gzip -9 $PKG/usr/info/* + README Y2K doc/FAQ doc/INTRO \ + $PKG/usr/doc/bash-$VERSION +( cd doc ; groff -ms -Tascii article.ms > $PKG/usr/doc/bash-$VERSION/article.txt ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc @@ -90,8 +148,3 @@ cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG makepkg -l y -c n $TMP/bash-$VERSION.$PATCHLEVEL-$ARCH-$BUILD.txz -# Clean up the extra stuff: -if [ "$1" = "--cleanup" ]; then - rm -rf $TMP/bash-$VERSION - rm -rf $PKG -fi diff --git a/source/a/bash/doinst.sh b/source/a/bash/doinst.sh index 21760838d..867958fb8 100644 --- a/source/a/bash/doinst.sh +++ b/source/a/bash/doinst.sh @@ -1,7 +1,7 @@ if [ -r bin/bash ]; then mv bin/bash bin/bash.old fi -mv bin/bash2.new bin/bash +mv bin/bash4.new bin/bash if [ -f bin/bash.old ]; then rm -f bin/bash.old fi @@ -9,10 +9,10 @@ if [ ! -r etc/shells ]; then touch etc/shells chmod 644 etc/shells fi -if fgrep "/bin/bash" etc/shells 1> /dev/null 2> /dev/null ; then +if grep -wq /bin/bash etc/shells ; then true else - echo "/bin/bash" >> etc/shells + echo /bin/bash >> etc/shells fi ( cd usr/bin ; rm -rf bash ) ( cd usr/bin ; ln -sf /bin/bash bash ) diff --git a/source/a/bash/patches/bash31-001 b/source/a/bash/patches/bash31-001 deleted file mode 100644 index 4a10a02c1..000000000 --- a/source/a/bash/patches/bash31-001 +++ /dev/null @@ -1,104 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-001 - -Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> -Bug-Reference-ID: <20051212015924.GA820@toucan.gentoo.org> <20051214034438.GK1863@toucan.gentoo.org> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2005-12/msg00030.html http://lists.gnu.org/archive/html/bug-bash/2005-12/msg00041.html - -Bug-Description: - -There are parsing problems with compound assignments in several contexts, -including as arguments to builtins like `local', `eval', and `let', and -as multiple assignments in a single command. - -Patch: - -*** ../bash-3.1/parse.y Fri Nov 11 23:14:18 2005 ---- parse.y Fri Dec 16 20:43:07 2005 -*************** -*** 3696,3700 **** - b = builtin_address_internal (token, 0); - if (b && (b->flags & ASSIGNMENT_BUILTIN)) -! parser_state |= PST_ASSIGNOK; - } - ---- 3696,3702 ---- - b = builtin_address_internal (token, 0); - if (b && (b->flags & ASSIGNMENT_BUILTIN)) -! parser_state |= PST_ASSIGNOK; -! else if (STREQ (token, "eval") || STREQ (token, "let")) -! parser_state |= PST_ASSIGNOK; - } - -*************** -*** 4687,4691 **** - { - WORD_LIST *wl, *rl; -! int tok, orig_line_number, orig_token_size; - char *saved_token, *ret; - ---- 4689,4693 ---- - { - WORD_LIST *wl, *rl; -! int tok, orig_line_number, orig_token_size, orig_last_token, assignok; - char *saved_token, *ret; - -*************** -*** 4693,4696 **** ---- 4695,4699 ---- - orig_token_size = token_buffer_size; - orig_line_number = line_number; -+ orig_last_token = last_read_token; - - last_read_token = WORD; /* WORD to allow reserved words here */ -*************** -*** 4699,4702 **** ---- 4702,4707 ---- - token_buffer_size = 0; - -+ assignok = parser_state&PST_ASSIGNOK; /* XXX */ -+ - wl = (WORD_LIST *)NULL; /* ( */ - parser_state |= PST_COMPASSIGN; -*************** -*** 4741,4745 **** - } - -! last_read_token = WORD; - if (wl) - { ---- 4746,4750 ---- - } - -! last_read_token = orig_last_token; /* XXX - was WORD? */ - if (wl) - { -*************** -*** 4753,4756 **** ---- 4758,4765 ---- - if (retlenp) - *retlenp = (ret && *ret) ? strlen (ret) : 0; -+ -+ if (assignok) -+ parser_state |= PST_ASSIGNOK; -+ - return ret; - } -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 0 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 1 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-002 b/source/a/bash/patches/bash31-002 deleted file mode 100644 index fac9a99af..000000000 --- a/source/a/bash/patches/bash31-002 +++ /dev/null @@ -1,239 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-002 - -Bug-Reported-by: vapier@gentoo.org -Bug-Reference-ID: <20051210223218.GD3324@toucan.gentoo.org> -Bug-Reference-URL:http://lists.gnu.org/archive/html/bug-bash/2005-12/msg00021.html - -Bug-Description: - -This corrects several omissions in the bash documentation: It adds the new -options to `ulimit', the exact expansions for `case' patterns, clarification -of the language concerning the return value of `[[', and updated version -information. - -Patch: - -*** ../bash-3.1/doc/bash.1 Wed Oct 12 11:40:52 2005 ---- doc/bash.1 Wed Dec 28 19:58:54 2005 -*************** -*** 7,16 **** - .\" chet@po.cwru.edu - .\" -! .\" Last Change: Sat Aug 27 13:28:44 EDT 2005 - .\" - .\" bash_builtins, strip all but Built-Ins section - .if \n(zZ=1 .ig zZ - .if \n(zY=1 .ig zY -! .TH BASH 1 "2005 Aug 27" "GNU Bash-3.1-beta1" - .\" - .\" There's some problem with having a `@' ---- 7,16 ---- - .\" chet@po.cwru.edu - .\" -! .\" Last Change: Wed Dec 28 19:58:45 EST 2005 - .\" - .\" bash_builtins, strip all but Built-Ins section - .if \n(zZ=1 .ig zZ - .if \n(zY=1 .ig zY -! .TH BASH 1 "2005 Dec 28" "GNU Bash-3.1" - .\" - .\" There's some problem with having a `@' -*************** -*** 678,683 **** - is enabled, the match is performed without regard to the case - of alphabetic characters. -! The return value is 0 if the string matches or does not match -! the pattern, respectively, and 1 otherwise. - Any part of the pattern may be quoted to force it to be matched as a - string. ---- 678,683 ---- - is enabled, the match is performed without regard to the case - of alphabetic characters. -! The return value is 0 if the string matches (\fB==\fP) or does not match -! (\fB!=\fP) the pattern, and 1 otherwise. - Any part of the pattern may be quoted to force it to be matched as a - string. -*************** -*** 808,811 **** ---- 808,817 ---- - .B Pathname Expansion - below). -+ The \fIword\fP is expanded using tilde -+ expansion, parameter and variable expansion, arithmetic substituion, -+ command substitution, process substitution and quote removal. -+ Each \fIpattern\fP examined is expanded using tilde -+ expansion, parameter and variable expansion, arithmetic substituion, -+ command substitution, and process substitution. - If the shell option - .B nocasematch -*************** -*** 8485,8489 **** - none are found. - .TP -! \fBulimit\fP [\fB\-SHacdflmnpstuv\fP [\fIlimit\fP]] - Provides control over the resources available to the shell and to - processes started by it, on systems that allow such control. ---- 8485,8489 ---- - none are found. - .TP -! \fBulimit\fP [\fB\-SHacdfilmnpqstuvx\fP [\fIlimit\fP]] - Provides control over the resources available to the shell and to - processes started by it, on systems that allow such control. -*************** -*** 8524,8527 **** ---- 8524,8530 ---- - The maximum size of files created by the shell - .TP -+ .B \-i -+ The maximum number of pending signals -+ .TP - .B \-l - The maximum size that may be locked into memory -*************** -*** 8537,8540 **** ---- 8540,8546 ---- - The pipe size in 512-byte blocks (this may not be set) - .TP -+ .B \-q -+ The maximum number of bytes in POSIX message queues -+ .TP - .B \-s - The maximum stack size -*************** -*** 8548,8551 **** ---- 8554,8560 ---- - .B \-v - The maximum amount of virtual memory available to the shell -+ .TP -+ .B \-x -+ The maximum number of file locks - .PD - .PP -*** ../bash-3.1/doc/bashref.texi Mon Oct 3 15:07:21 2005 ---- doc/bashref.texi Fri Dec 30 10:50:39 2005 -*************** -*** 962,967 **** - is enabled, the match is performed without regard to the case - of alphabetic characters. -! The return value is 0 if the string matches or does not match -! the pattern, respectively, and 1 otherwise. - Any part of the pattern may be quoted to force it to be matched as a - string. ---- 962,967 ---- - is enabled, the match is performed without regard to the case - of alphabetic characters. -! The return value is 0 if the string matches (@samp{==}) or does not -! match (@samp{!=})the pattern, and 1 otherwise. - Any part of the pattern may be quoted to force it to be matched as a - string. -*************** -*** 2599,2603 **** - or inconvenient to obtain with separate utilities. - -! This section briefly the builtins which Bash inherits from - the Bourne Shell, as well as the builtin commands which are unique - to or have been extended in Bash. ---- 2597,2601 ---- - or inconvenient to obtain with separate utilities. - -! This section briefly describes the builtins which Bash inherits from - the Bourne Shell, as well as the builtin commands which are unique - to or have been extended in Bash. -*************** -*** 3834,3838 **** - @btindex ulimit - @example -! ulimit [-acdflmnpstuvSH] [@var{limit}] - @end example - @code{ulimit} provides control over the resources available to processes ---- 3834,3838 ---- - @btindex ulimit - @example -! ulimit [-acdfilmnpqstuvxSH] [@var{limit}] - @end example - @code{ulimit} provides control over the resources available to processes -*************** -*** 3858,3861 **** ---- 3858,3864 ---- - The maximum size of files created by the shell. - -+ @item -i -+ The maximum number of pending signals. -+ - @item -l - The maximum size that may be locked into memory. -*************** -*** 3870,3873 **** ---- 3873,3879 ---- - The pipe buffer size. - -+ @item -q -+ The maximum number of bytes in POSIX message queues. -+ - @item -s - The maximum stack size. -*************** -*** 3882,3885 **** ---- 3888,3894 ---- - The maximum amount of virtual memory available to the process. - -+ @item -x -+ The maximum number of file locks. -+ - @end table - -*************** -*** 4090,4095 **** - - @item -x -! Print a trace of simple commands, \fBfor\fP commands, \fBcase\fP -! commands, \fBselect\fP commands, and arithmetic \fBfor\fP commands - and their arguments or associated word lists after they are - expanded and before they are executed. The value of the @env{PS4} ---- 4103,4108 ---- - - @item -x -! Print a trace of simple commands, @code{for} commands, @code{case} -! commands, @code{select} commands, and arithmetic @code{for} commands - and their arguments or associated word lists after they are - expanded and before they are executed. The value of the @env{PS4} -*** ../bash-3.1/doc/version.texi Tue Sep 20 14:52:56 2005 ---- doc/version.texi Fri Dec 30 10:50:58 2005 -*************** -*** 3,10 **** - @end ignore - -! @set LASTCHANGE Mon Sep 5 11:47:04 EDT 2005 - -! @set EDITION 3.1-beta1 -! @set VERSION 3.1-beta1 -! @set UPDATED 5 September 2005 -! @set UPDATED-MONTH September 2005 ---- 3,10 ---- - @end ignore - -! @set LASTCHANGE Fri Dec 30 10:50:51 EST 2005 - -! @set EDITION 3.1 -! @set VERSION 3.1 -! @set UPDATED 30 December 2005 -! @set UPDATED-MONTH December 2005 -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 1 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 2 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-003 b/source/a/bash/patches/bash31-003 deleted file mode 100644 index cd36dc83e..000000000 --- a/source/a/bash/patches/bash31-003 +++ /dev/null @@ -1,47 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-003 - -Bug-Reported-by: Adam Buraczewski <adamb@nor.pl> -Bug-Reference-ID: <200512210950.jBL9o4C2008608@localhost.localdomain> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2005-12/msg00055.html - -Bug-Description: - -A missing #define guard causes bash to not compile when readline is not -configured in, either as the result of explicit disabling or when the -`--enable-minimal-config' option is given to configure. - -Patch: - -*** ../bash-3.1/variables.c Sat Nov 12 21:22:37 2005 ---- variables.c Mon Dec 26 13:34:03 2005 -*************** -*** 861,867 **** ---- 863,871 ---- - char val[INT_STRLEN_BOUND(int) + 1], *v; - -+ #if defined (READLINE) - /* If we are currently assigning to LINES or COLUMNS, don't do anything. */ - if (winsize_assignment) - return; -+ #endif - - v = inttostr (lines, val, sizeof (val)); -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 2 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 3 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-004 b/source/a/bash/patches/bash31-004 deleted file mode 100644 index 4f9d578ef..000000000 --- a/source/a/bash/patches/bash31-004 +++ /dev/null @@ -1,48 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-004 - -Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> -Bug-Reference-ID: <20051223172359.GF14579@toucan.gentoo.org> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2005-12/msg00062.html - -Bug-Description: - -A local array variable declared at function scope that shadows a variable -of the same name declared in a previous scope did not create a separate -variable instance, but used the previous one. - -Patch: - -*** ../bash-3.1/subst.c Mon Oct 24 09:51:13 2005 ---- subst.c Fri Dec 30 12:11:53 2005 -*************** -*** 2188,2192 **** - { - v = find_variable (name); -! if (v == 0 || array_p (v) == 0) - v = make_local_array_variable (name); - v = assign_array_var_from_string (v, value, flags); ---- 2188,2192 ---- - { - v = find_variable (name); -! if (v == 0 || array_p (v) == 0 || v->context != variable_context) - v = make_local_array_variable (name); - v = assign_array_var_from_string (v, value, flags); -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 3 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 4 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-005 b/source/a/bash/patches/bash31-005 deleted file mode 100644 index b6d5cdca8..000000000 --- a/source/a/bash/patches/bash31-005 +++ /dev/null @@ -1,54 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-005 - -Bug-Reported-by: -Bug-Reference-ID: -Bug-Reference-URL: - -Bug-Description: - -When tilde expansion fails, POSIX leaves it unspecified whether or not the -word undergoes the additional word expansions. Bash-3.1 as distributed -skipped the rest of the expansions; this patch restores the bash-3.0 behavior. - -This means that something like - USER=ratbert - echo ~$USER - -will echo `~ratbert' rather than `~$USER'. - -Patch: - -*** ../bash-3.1/subst.c Mon Oct 24 09:51:13 2005 ---- subst.c Fri Dec 30 12:11:53 2005 -*************** -*** 6796,6799 **** ---- 6823,6832 ---- - { - temp1 = bash_tilde_expand (temp, tflag); -+ if (temp1 && *temp1 == '~' && STREQ (temp, temp1)) -+ { -+ FREE (temp); -+ FREE (temp1); -+ goto add_character; /* tilde expansion failed */ -+ } - free (temp); - temp = temp1; -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 4 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 5 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-006 b/source/a/bash/patches/bash31-006 deleted file mode 100644 index 8d7499381..000000000 --- a/source/a/bash/patches/bash31-006 +++ /dev/null @@ -1,58 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-006 - -Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> -Bug-Reference-ID: <200601120613.11907.vapier@gentoo.org> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-01/msg00045.html - -Bug-Description: - -Under some circumstances, Bash can use an incorrect setting for the flag -that indicates whether or not the terminal can auto-wrap, resulting in line- -wrapping errors. - -Patch: - -*** ../bash-3.1/lib/readline/terminal.c Sat Nov 12 20:46:54 2005 ---- lib/readline/terminal.c Tue Jan 31 10:57:54 2006 -*************** -*** 123,127 **** - - /* Non-zero means the terminal can auto-wrap lines. */ -! int _rl_term_autowrap; - - /* Non-zero means that this terminal has a meta key. */ ---- 126,130 ---- - - /* Non-zero means the terminal can auto-wrap lines. */ -! int _rl_term_autowrap = -1; - - /* Non-zero means that this terminal has a meta key. */ -*************** -*** 275,278 **** ---- 278,284 ---- - int rows, cols; - { -+ if (_rl_term_autowrap == -1) -+ _rl_init_terminal_io (rl_terminal_name); -+ - if (rows > 0) - _rl_screenheight = rows; -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 5 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 6 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-007 b/source/a/bash/patches/bash31-007 deleted file mode 100644 index 6233786c4..000000000 --- a/source/a/bash/patches/bash31-007 +++ /dev/null @@ -1,121 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-007 - -Bug-Reported-by: Tim Waugh <twaugh@redhat.com>, Laird Breyer <laird@lbreyer.com> -Bug-Reference-ID: <20060105174434.GY16000@redhat.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-01/msg00009.html - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=347695 - -Bug-Description: - -When the number of saved jobs exceeds the initial size of the jobs array -(4096 slots), the array must be compacted and reallocated. An error in -the code to do that could cause a segmentation fault. - -Patch: - -*** ../bash-3.1/jobs.c Fri Nov 11 23:13:27 2005 ---- jobs.c Wed Feb 1 13:55:38 2006 -*************** -*** 845,851 **** - { - sigset_t set, oset; -! int nsize, i, j; - JOB **nlist; - - nsize = ((js.j_njobs + JOB_SLOTS - 1) / JOB_SLOTS); - nsize *= JOB_SLOTS; ---- 888,895 ---- - { - sigset_t set, oset; -! int nsize, i, j, ncur, nprev; - JOB **nlist; - -+ ncur = nprev = NO_JOB; - nsize = ((js.j_njobs + JOB_SLOTS - 1) / JOB_SLOTS); - nsize *= JOB_SLOTS; -*************** -*** 855,869 **** - - BLOCK_CHILD (set, oset); -! nlist = (JOB **) xmalloc (nsize * sizeof (JOB *)); - for (i = j = 0; i < js.j_jobslots; i++) - if (jobs[i]) -! nlist[j++] = jobs[i]; - - js.j_firstj = 0; -! js.j_lastj = (j > 0) ? j - 1: 0; - js.j_jobslots = nsize; - -! free (jobs); -! jobs = nlist; - - UNBLOCK_CHILD (oset); ---- 899,947 ---- - - BLOCK_CHILD (set, oset); -! nlist = (js.j_jobslots == nsize) ? jobs : (JOB **) xmalloc (nsize * sizeof (JOB *)); -! - for (i = j = 0; i < js.j_jobslots; i++) - if (jobs[i]) -! { -! if (i == js.j_current) -! ncur = j; -! if (i == js.j_previous) -! nprev = j; -! nlist[j++] = jobs[i]; -! } -! -! #if defined (DEBUG) -! itrace ("realloc_jobs_list: resize jobs list from %d to %d", js.j_jobslots, nsize); -! itrace ("realloc_jobs_list: j_lastj changed from %d to %d", js.j_lastj, (j > 0) ? j - 1 : 0); -! itrace ("realloc_jobs_list: j_njobs changed from %d to %d", js.j_njobs, (j > 0) ? j - 1 : 0); -! #endif - - js.j_firstj = 0; -! js.j_lastj = (j > 0) ? j - 1 : 0; -! js.j_njobs = j; - js.j_jobslots = nsize; - -! /* Zero out remaining slots in new jobs list */ -! for ( ; j < nsize; j++) -! nlist[j] = (JOB *)NULL; -! -! if (jobs != nlist) -! { -! free (jobs); -! jobs = nlist; -! } -! -! if (ncur != NO_JOB) -! js.j_current = ncur; -! if (nprev != NO_JOB) -! js.j_previous = nprev; -! -! /* Need to reset these */ -! if (js.j_current == NO_JOB || js.j_previous == NO_JOB || js.j_current > js.j_lastj || js.j_previous > js.j_lastj) -! reset_current (); -! -! #ifdef DEBUG -! itrace ("realloc_jobs_list: reset js.j_current (%d) and js.j_previous (%d)", js.j_current, js.j_previous); -! #endif - - UNBLOCK_CHILD (oset); -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 6 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 7 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-008 b/source/a/bash/patches/bash31-008 deleted file mode 100644 index 3427b64e0..000000000 --- a/source/a/bash/patches/bash31-008 +++ /dev/null @@ -1,51 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-008 - -Bug-Reported-by: Ingemar Nilsson <init@kth.se> -Bug-Reference-ID: <43C38D35.7020404@kth.se> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-01/msg00044.html - -Bug-Description: - -In some cases, bash inappropriately allows SIGINT from the terminal to -reach background processes. - -Patch: - -*** ../bash-3.1/jobs.c Fri Nov 11 23:13:27 2005 ---- jobs.c Wed Feb 1 13:55:38 2006 -*************** -*** 2199,2203 **** - wait_sigint_received = 0; - if (job_control == 0) -! old_sigint_handler = set_signal_handler (SIGINT, wait_sigint_handler); - - termination_state = last_command_exit_value; ---- 2298,2306 ---- - wait_sigint_received = 0; - if (job_control == 0) -! { -! old_sigint_handler = set_signal_handler (SIGINT, wait_sigint_handler); -! if (old_sigint_handler == SIG_IGN) -! set_signal_handler (SIGINT, old_sigint_handler); -! } - - termination_state = last_command_exit_value; -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 7 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 8 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-009 b/source/a/bash/patches/bash31-009 deleted file mode 100644 index 8ef229585..000000000 --- a/source/a/bash/patches/bash31-009 +++ /dev/null @@ -1,66 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-009 - -Bug-Reported-by: Joshua Neuheisel <jneuheisel@gmail.com> -Bug-Reference-ID: <25d873330601140820v4ad8efd2t8bf683b073c138b3@mail.gmail.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-01/msg00062.html - -Bug-Description: - -Under some circumstances, background (asynchronous) jobs can set the terminal -process group incorrectly. This can cause a foreground process (including -the foreground shell) to get read errors and exit. - -Patch: - -*** ../bash-3.1/jobs.c Fri Nov 11 23:13:27 2005 ---- jobs.c Wed Feb 1 13:55:38 2006 -*************** -*** 620,625 **** - * the parent gives it away. - * - */ -! if (job_control && newjob->pgrp) - give_terminal_to (newjob->pgrp, 0); - } ---- 634,642 ---- - * the parent gives it away. - * -+ * Don't give the terminal away if this shell is an asynchronous -+ * subshell. -+ * - */ -! if (job_control && newjob->pgrp && (subshell_environment&SUBSHELL_ASYNC) == 0) - give_terminal_to (newjob->pgrp, 0); - } -*************** -*** 1656,1660 **** - shell's process group (we could be in the middle of a - pipeline, for example). */ -! if (async_p == 0 && pipeline_pgrp != shell_pgrp) - give_terminal_to (pipeline_pgrp, 0); - ---- 1743,1747 ---- - shell's process group (we could be in the middle of a - pipeline, for example). */ -! if (async_p == 0 && pipeline_pgrp != shell_pgrp && ((subshell_environment&SUBSHELL_ASYNC) == 0)) - give_terminal_to (pipeline_pgrp, 0); - -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 8 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 9 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-010 b/source/a/bash/patches/bash31-010 deleted file mode 100644 index 066a3242d..000000000 --- a/source/a/bash/patches/bash31-010 +++ /dev/null @@ -1,54 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-010 - -Bug-Reported-by: vw@vonwolff.de -Bug-Reference-ID: <20060123135234.1AC2F1D596@wst07.vonwolff.de> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-01/msg00090.html - -Bug-Description: - -There is a difference in behavior between bash-3.0 and bash-3.1 involving -parsing of single- and double-quoted strings occurring in old-style -command substitution. The difference has to do with how backslashes are -processed. This patch restores a measure of backwards compatibility while -the question of POSIX conformance and ultimately correct behavior is discussed. - -Patch: - -*** ../bash-3.1/parse.y Fri Nov 11 23:14:18 2005 ---- parse.y Wed Jan 25 14:55:18 2006 -*************** -*** 2899,2903 **** - else if MBTEST(qc == '`' && (ch == '"' || ch == '\'') && in_comment == 0) - { -! nestret = parse_matched_pair (0, ch, ch, &nestlen, rflags); - goto add_nestret; - } ---- 2901,2909 ---- - else if MBTEST(qc == '`' && (ch == '"' || ch == '\'') && in_comment == 0) - { -! /* Add P_ALLOWESC so backslash quotes the next character and -! shell_getc does the right thing with \<newline>. We do this for -! a measure of backwards compatibility -- it's not strictly the -! right POSIX thing. */ -! nestret = parse_matched_pair (0, ch, ch, &nestlen, rflags|P_ALLOWESC); - goto add_nestret; - } -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 9 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 10 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-011 b/source/a/bash/patches/bash31-011 deleted file mode 100644 index 025b83907..000000000 --- a/source/a/bash/patches/bash31-011 +++ /dev/null @@ -1,47 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-011 - -Bug-Reported-by: Mike Stroyan <mike.stroyan@hp.com> -Bug-Reference-ID: <E1EvwxP-0004LD-GC@localhost.localdomain> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-01/msg00033.html - -Bug-Description: - -A change in bash-3.1 caused the single quotes to be stripped from ANSI-C -quoting inside double-quoted command substitutions. - -Patch: - -*** ../bash-3.1/parse.y Fri Nov 11 23:14:18 2005 ---- parse.y Wed Jan 25 14:55:18 2006 -*************** -*** 2908,2912 **** - count--; - if (ch == '(') /* ) */ -! nestret = parse_matched_pair (0, '(', ')', &nestlen, rflags); - else if (ch == '{') /* } */ - nestret = parse_matched_pair (0, '{', '}', &nestlen, P_FIRSTCLOSE|rflags); ---- 2914,2918 ---- - count--; - if (ch == '(') /* ) */ -! nestret = parse_matched_pair (0, '(', ')', &nestlen, rflags & ~P_DQUOTE); - else if (ch == '{') /* } */ - nestret = parse_matched_pair (0, '{', '}', &nestlen, P_FIRSTCLOSE|rflags); -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 10 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 11 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-012 b/source/a/bash/patches/bash31-012 deleted file mode 100644 index b0ddb3a48..000000000 --- a/source/a/bash/patches/bash31-012 +++ /dev/null @@ -1,47 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-012 - -Bug-Reported-by: Alexander Kshevetskiy <alex@dgap.mipt.ru> -Bug-Reference-ID: <308374997.20060124175849@dgap.mipt.ru> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-01/msg00097.html - -Bug-Description: - -There is a parsing problem involving parentheses in assignment statements -that causes words to be terminated prematurely. - -Patch: - -*** ../bash-3.1/parse.y Fri Nov 11 23:14:18 2005 ---- parse.y Wed Jan 25 14:55:18 2006 -*************** -*** 3579,3583 **** - all_digit_token = 0; - compound_assignment = 1; -! #if 0 - goto next_character; - #else ---- 3584,3588 ---- - all_digit_token = 0; - compound_assignment = 1; -! #if 1 - goto next_character; - #else -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 11 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 12 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-013 b/source/a/bash/patches/bash31-013 deleted file mode 100644 index 93c7c8fc8..000000000 --- a/source/a/bash/patches/bash31-013 +++ /dev/null @@ -1,44 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-013 - -Bug-Reported-by: Bob Rossi <bob@brasko.net> -Bug-Reference-ID: <43F60606.80708@case.edu> -Bug-Reference-URL: - -Bug-Description: - -In some cases, readline will reference freed memory when attempting to -display a portion of the prompt. - -Patch: - -*** ../bash-3.1-patched/lib/readline/readline.c Mon Jul 4 22:29:35 2005 ---- lib/readline/readline.c Fri Feb 17 22:54:22 2006 -*************** -*** 282,287 **** ---- 282,288 ---- - { - FREE (rl_prompt); - rl_prompt = prompt ? savestring (prompt) : (char *)NULL; -+ rl_display_prompt = rl_prompt ? rl_prompt : ""; - - rl_visible_prompt_length = rl_expand_prompt (rl_prompt); - return 0; -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 12 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 13 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-014 b/source/a/bash/patches/bash31-014 deleted file mode 100644 index 82ff9b408..000000000 --- a/source/a/bash/patches/bash31-014 +++ /dev/null @@ -1,105 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-014 - -Bug-Reported-by: Mike Stroyan <mike.stroyan@hp.com> -Bug-Reference-ID: <20060203191607.GC27614@localhost> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-02/msg00004.html - -Bug-Description: - -The displayed search prompt is corrupted when using non-incremental -searches in vi and emacs mode if the prompt contains non-printing -characters or spans multiple lines. The prompt is expanded more than -once; the second time without the escape sequences that protect non- -printing characters from the length calculations. - -Patch: - -*** ../bash-3.1-patched/lib/readline/display.c Wed Nov 30 14:05:02 2005 ---- lib/readline/display.c Sat Feb 18 12:14:58 2006 -*************** -*** 1983,1993 **** - int pchar; - { - int len; -! char *pmt; - - rl_save_prompt (); - -! if (saved_local_prompt == 0) - { - len = (rl_prompt && *rl_prompt) ? strlen (rl_prompt) : 0; - pmt = (char *)xmalloc (len + 2); ---- 1998,2012 ---- - int pchar; - { - int len; -! char *pmt, *p; - - rl_save_prompt (); - -! /* We've saved the prompt, and can do anything with the various prompt -! strings we need before they're restored. We want the unexpanded -! portion of the prompt string after any final newline. */ -! p = rl_prompt ? strrchr (rl_prompt, '\n') : 0; -! if (p == 0) - { - len = (rl_prompt && *rl_prompt) ? strlen (rl_prompt) : 0; - pmt = (char *)xmalloc (len + 2); -*************** -*** 1998,2016 **** - } - else - { -! len = *saved_local_prompt ? strlen (saved_local_prompt) : 0; - pmt = (char *)xmalloc (len + 2); - if (len) -! strcpy (pmt, saved_local_prompt); - pmt[len] = pchar; - pmt[len+1] = '\0'; -! local_prompt = savestring (pmt); -! prompt_last_invisible = saved_last_invisible; -! prompt_visible_length = saved_visible_length + 1; -! } - - prompt_physical_chars = saved_physical_chars + 1; -- - return pmt; - } - ---- 2017,2033 ---- - } - else - { -! p++; -! len = strlen (p); - pmt = (char *)xmalloc (len + 2); - if (len) -! strcpy (pmt, p); - pmt[len] = pchar; - pmt[len+1] = '\0'; -! } - -+ /* will be overwritten by expand_prompt, called from rl_message */ - prompt_physical_chars = saved_physical_chars + 1; - return pmt; - } - -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 13 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 14 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-015 b/source/a/bash/patches/bash31-015 deleted file mode 100644 index deb9eed58..000000000 --- a/source/a/bash/patches/bash31-015 +++ /dev/null @@ -1,106 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-015 - -Bug-Reported-by: Benoit Vila -Bug-Reference-ID: <43FCA614.1090108@free.fr> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-02/msg00058.html - -Bug-Description: - -A problem with the extended globbing code prevented dots from matching -filenames when used in some extended matching patterns. - -Patch: - -*** ../bash-3.1-patched/lib/glob/sm_loop.c Sun Oct 16 21:21:04 2005 ---- lib/glob/sm_loop.c Mon Feb 27 17:18:43 2006 -*************** -*** 639,643 **** - CHAR *pnext; /* pointer to next sub-pattern */ - CHAR *srest; /* pointer to rest of string */ -! int m1, m2; - - #if DEBUG_MATCHING ---- 638,642 ---- - CHAR *pnext; /* pointer to next sub-pattern */ - CHAR *srest; /* pointer to rest of string */ -! int m1, m2, xflags; /* xflags = flags passed to recursive matches */ - - #if DEBUG_MATCHING -*************** -*** 645,648 **** ---- 644,648 ---- - fprintf(stderr, "extmatch: s = %s; se = %s\n", s, se); - fprintf(stderr, "extmatch: p = %s; pe = %s\n", p, pe); -+ fprintf(stderr, "extmatch: flags = %d\n", flags); - #endif - -*************** -*** 678,683 **** - multiple matches of the pattern. */ - if (m1) -! m2 = (GMATCH (srest, se, prest, pe, flags) == 0) || -! (s != srest && GMATCH (srest, se, p - 1, pe, flags) == 0); - if (m1 && m2) - return (0); ---- 678,687 ---- - multiple matches of the pattern. */ - if (m1) -! { -! /* if srest > s, we are not at start of string */ -! xflags = (srest > s) ? (flags & ~FNM_PERIOD) : flags; -! m2 = (GMATCH (srest, se, prest, pe, xflags) == 0) || -! (s != srest && GMATCH (srest, se, p - 1, pe, xflags) == 0); -! } - if (m1 && m2) - return (0); -*************** -*** 705,710 **** - for ( ; srest <= se; srest++) - { - if (GMATCH (s, srest, psub, pnext - 1, flags) == 0 && -! GMATCH (srest, se, prest, pe, flags) == 0) - return (0); - } ---- 709,716 ---- - for ( ; srest <= se; srest++) - { -+ /* if srest > s, we are not at start of string */ -+ xflags = (srest > s) ? (flags & ~FNM_PERIOD) : flags; - if (GMATCH (s, srest, psub, pnext - 1, flags) == 0 && -! GMATCH (srest, se, prest, pe, xflags) == 0) - return (0); - } -*************** -*** 727,731 **** - break; - } -! if (m1 == 0 && GMATCH (srest, se, prest, pe, flags) == 0) - return (0); - } ---- 733,739 ---- - break; - } -! /* if srest > s, we are not at start of string */ -! xflags = (srest > s) ? (flags & ~FNM_PERIOD) : flags; -! if (m1 == 0 && GMATCH (srest, se, prest, pe, xflags) == 0) - return (0); - } -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 14 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 15 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-016 b/source/a/bash/patches/bash31-016 deleted file mode 100644 index fa0ffe1c7..000000000 --- a/source/a/bash/patches/bash31-016 +++ /dev/null @@ -1,51 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-016 - -Bug-Reported-by: Nikita Danilov <nikita@clusterfs.com> -Bug-Reference-ID: <17397.51015.769854.541057@gargle.gargle.HOWL> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2006-02/msg00064.html - -Bug-Description: - -Bash will dump core when attempting to perform globbing in directories with -very large numbers of files. - -Patch: - -*** ../bash-3.1-patched/lib/glob/glob.c Thu Mar 24 12:42:27 2005 ---- lib/glob/glob.c Fri Mar 3 16:54:12 2006 -*************** -*** 361,364 **** ---- 361,365 ---- - - firstmalloc = 0; -+ nalloca = 0; - - /* If PAT is empty, skip the loop, but return one (empty) filename. */ -*************** -*** 547,550 **** ---- 551,556 ---- - tmplink = lastlink; - } -+ else -+ tmplink = 0; - free (lastlink->name); - lastlink = lastlink->next; -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 15 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 16 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/bash/patches/bash31-017 b/source/a/bash/patches/bash31-017 deleted file mode 100644 index 84f891551..000000000 --- a/source/a/bash/patches/bash31-017 +++ /dev/null @@ -1,131 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 3.1 -Patch-ID: bash31-017 - -Bug-Reported-by: syphir@syphir.sytes.net -Bug-Reference-ID: <442421F5.3010105@syphir.sytes.net> -Bug-Reference-URL: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=358831 - -Bug-Description: - -Array expansion fails with an arithmetic syntax error when the subscript -appears within double quotes. For example: ${a["4"]}. - -Patch: - -*** ../bash-3.1-patched/subst.c Wed Apr 12 08:47:08 2006 ---- subst.c Wed Apr 12 08:49:02 2006 -*************** -*** 2576,2579 **** ---- 2576,2586 ---- - } - -+ char * -+ expand_arith_string (string, quoted) -+ char *string; -+ { -+ return (expand_string_if_necessary (string, quoted, expand_string)); -+ } -+ - #if defined (COND_COMMAND) - /* Just remove backslashes in STRING. Returns a new string. */ -*************** -*** 5249,5253 **** - t = (char *)0; - -! temp1 = expand_string_if_necessary (substr, Q_DOUBLE_QUOTES, expand_string); - *e1p = evalexp (temp1, &expok); - free (temp1); ---- 5256,5260 ---- - t = (char *)0; - -! temp1 = expand_arith_string (substr, Q_DOUBLE_QUOTES); - *e1p = evalexp (temp1, &expok); - free (temp1); -*************** -*** 5294,5298 **** - t++; - temp2 = savestring (t); -! temp1 = expand_string_if_necessary (temp2, Q_DOUBLE_QUOTES, expand_string); - free (temp2); - t[-1] = ':'; ---- 5301,5305 ---- - t++; - temp2 = savestring (t); -! temp1 = expand_arith_string (temp2, Q_DOUBLE_QUOTES); - free (temp2); - t[-1] = ':'; -*************** -*** 6436,6440 **** - - /* Expand variables found inside the expression. */ -! temp1 = expand_string_if_necessary (temp2, Q_DOUBLE_QUOTES, expand_string); - free (temp2); - ---- 6443,6447 ---- - - /* Expand variables found inside the expression. */ -! temp1 = expand_arith_string (temp2, Q_DOUBLE_QUOTES); - free (temp2); - -*************** -*** 6478,6482 **** - - /* Do initial variable expansion. */ -! temp1 = expand_string_if_necessary (temp, Q_DOUBLE_QUOTES, expand_string); - - goto arithsub; ---- 6485,6489 ---- - - /* Do initial variable expansion. */ -! temp1 = expand_arith_string (temp, Q_DOUBLE_QUOTES); - - goto arithsub; -*** ../bash-3.1-patched/subst.h Sun Nov 7 15:12:28 2004 ---- subst.h Mon Mar 27 09:10:38 2006 -*************** -*** 152,155 **** ---- 152,158 ---- - extern char *expand_assignment_string_to_string __P((char *, int)); - -+ /* Expand an arithmetic expression string */ -+ extern char *expand_arith_string __P((char *, int)); -+ - /* De-quoted quoted characters in STRING. */ - extern char *dequote_string __P((char *)); -*** ../bash-3.1-patched/arrayfunc.c Mon Jul 4 20:25:58 2005 ---- arrayfunc.c Mon Mar 27 09:10:47 2006 -*************** -*** 593,601 **** - strncpy (exp, s, len - 1); - exp[len - 1] = '\0'; -! #if 0 -! t = expand_string_to_string (exp, 0); -! #else -! t = expand_string_to_string (exp, Q_DOUBLE_QUOTES); -! #endif - this_command_name = (char *)NULL; - val = evalexp (t, &expok); ---- 591,595 ---- - strncpy (exp, s, len - 1); - exp[len - 1] = '\0'; -! t = expand_arith_string (exp, 0); - this_command_name = (char *)NULL; - val = evalexp (t, &expok); -*** ../bash-3.1/patchlevel.h Wed Jul 20 13:58:20 2005 ---- patchlevel.h Wed Dec 7 13:48:42 2005 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 16 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 17 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/source/a/coreutils/coreutils-dircolors.csh b/source/a/coreutils/coreutils-dircolors.csh index 38d73ca2a..d7234c855 100644 --- a/source/a/coreutils/coreutils-dircolors.csh +++ b/source/a/coreutils/coreutils-dircolors.csh @@ -18,8 +18,8 @@ setenv COLOR auto # simply setting the LS_OPTIONS variable using the information # already given above: setenv LS_OPTIONS " $OPTIONS --color=$COLOR " -unset COLOR -unset OPTIONS +unsetenv COLOR +unsetenv OPTIONS # Set up aliases to use color ls by default. A few additional # aliases like 'dir', 'vdir', etc, are some ancient artifacts @@ -30,7 +30,7 @@ alias dir '/bin/ls $LS_OPTIONS --format=vertical'; alias vdir '/bin/ls $LS_OPTIONS --format=long'; alias d dir; alias v vdir; -unset noglob; +unsetenv noglob; # Set up the LS_COLORS environment: [ -f $HOME/.dir_colors ] diff --git a/source/a/coreutils/coreutils-dircolors.sh b/source/a/coreutils/coreutils-dircolors.sh index 728ea7452..fc848c6fc 100644 --- a/source/a/coreutils/coreutils-dircolors.sh +++ b/source/a/coreutils/coreutils-dircolors.sh @@ -6,13 +6,7 @@ # -F = show '/' for dirs, '*' for executables, etc. # -T 0 = don't trust tab spacing when formatting ls output. # -b = better support for special characters -if [ "$SHELL" != "/bin/zsh" ]; then - # Edit options below for all sh-like shells except zsh: - OPTIONS="-F -b -T 0" -else - # If you use zsh, edit the options below instead: - OPTIONS=( -F -b -T 0 ) -fi +OPTIONS="-F -b -T 0" # COLOR needs one of these arguments: # 'auto' colorizes output to ttys, but not pipes. @@ -20,14 +14,11 @@ fi # 'never' shuts colorization off. COLOR=auto + # This section shouldn't require any user adjustment since it is # simply setting the LS_OPTIONS variable using the information # already given above: -if [ "$SHELL" = "/bin/zsh" ]; then - LS_OPTIONS=( $OPTIONS --color=$COLOR ); -else - LS_OPTIONS=" $OPTIONS --color=$COLOR "; -fi +LS_OPTIONS="$OPTIONS --color=$COLOR"; export LS_OPTIONS; unset COLOR unset OPTIONS @@ -36,23 +27,21 @@ unset OPTIONS # aliases like 'dir', 'vdir', etc, are some ancient artifacts # from 1992 or so... possibly they should be disabled, but maybe # someone out there is actually using them? :-) -# Assume shell aliases are supported. Ash is going to freak out -# when it sees zsh syntax anyway, so whatever. -alias ls='/bin/ls $LS_OPTIONS'; -alias dir='/bin/ls $LS_OPTIONS --format=vertical'; -alias vdir='/bin/ls $LS_OPTIONS --format=long'; -alias d=dir; -alias v=vdir; - -# Just for fun, here are the old sh/ash style shell functions. -# this script isn't currently working with ash (and makes some noisy -# error messages), but perhaps these will still be of use to -# someone... -#ls () { /bin/ls $LS_OPTIONS "$@" ; }; -#dir () { /bin/ls $LS_OPTIONS --format=vertical "$@" ; }; -#vdir () { /bin/ls $LS_OPTIONS --format=long "$@" ; }; -#d () { dir "$@" ; }; -#v () { vdir "$@" ; }; +# Assume shell aliases are supported. +if [ "$SHELL" = "/bin/zsh" ] ; then + # By default, zsh doesn't split parameters into separate words + # when it encounters whitespace. The '=' flag will fix this. + # see zshexpn(1) man-page regarding SH_WORD_SPLIT. + alias ls='/bin/ls ${=LS_OPTIONS}' + alias dir='/bin/ls ${=LS_OPTIONS} --format=vertical' + alias vdir='/bin/ls ${=LS_OPTIONS} --format=long' +else + alias ls='/bin/ls $LS_OPTIONS' + alias dir='/bin/ls $LS_OPTIONS --format=vertical' + alias vdir='/bin/ls $LS_OPTIONS --format=long' +fi +alias d=dir +alias v=vdir # Set up the LS_COLORS environment: if [ -f $HOME/.dir_colors ]; then diff --git a/source/a/coreutils/coreutils.SlackBuild b/source/a/coreutils/coreutils.SlackBuild index bc0434277..3d31bf9fb 100755 --- a/source/a/coreutils/coreutils.SlackBuild +++ b/source/a/coreutils/coreutils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,47 +20,64 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=coreutils -VERSION=${VERSION:-7.4} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +PKGNAM=coreutils +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-3} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" elif [ "$ARCH" = "arm" ]; then SLKCFLAGS="-O2 -march=armv4 -mtune=xscale" + LIBDIRSUFFIX="" elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" + LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -if [ -r $CWD/$PRGNAM-$VERSION.tar.gz ]; then - tar xf $CWD/$PRGNAM-$VERSION.tar.gz || exit 1 -elif [ -r $CWD/$PRGNAM-$VERSION.tar.bz2 ]; then - tar xf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -elif [ -r $CWD/$PRGNAM-$VERSION.tar.xz ]; then - tar xf $CWD/$PRGNAM-$VERSION.tar.xz || exit 1 -elif [ -r $CWD/$PRGNAM-$VERSION.tar.lzma ]; then - tar xf $CWD/$PRGNAM-$VERSION.tar.lzma || exit 1 +rm -rf $PKGNAM-$VERSION +if [ -r $CWD/$PKGNAM-$VERSION.tar.gz ]; then + tar xf $CWD/$PKGNAM-$VERSION.tar.gz || exit 1 +elif [ -r $CWD/$PKGNAM-$VERSION.tar.bz2 ]; then + tar xf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +elif [ -r $CWD/$PKGNAM-$VERSION.tar.xz ]; then + tar xf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 +elif [ -r $CWD/$PKGNAM-$VERSION.tar.lzma ]; then + tar xf $CWD/$PKGNAM-$VERSION.tar.lzma || exit 1 else exit 1 fi -cd $PRGNAM-$VERSION +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -68,8 +85,8 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Patch in the uname for Linux enhancements -zcat $CWD/$PRGNAM.uname.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 +# Patch uname to correctly display CPU information: +zcat $CWD/$PKGNAM.uname.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 # Compilation with glibc version later than 2.3.2 needs the environment # variable DEFAULT_POSIX2_VERSION set to 199209. @@ -87,6 +104,8 @@ DEFAULT_POSIX2_VERSION=199209 \ --mandir=/usr/man \ --infodir=/usr/info \ --sysconfdir=/etc \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --without-gmp \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 @@ -153,10 +172,18 @@ done rm -f $PKG/usr/info/dir gzip -9 $PKG/usr/info/* -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ ABOUT-NLS AUTHORS COPYING* NEWS README THANKS THANKS-to-translators TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh @@ -164,5 +191,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc # Build the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/coreutils/coreutils.uname.diff b/source/a/coreutils/coreutils.uname.diff index bd39221c1..699110318 100644 --- a/source/a/coreutils/coreutils.uname.diff +++ b/source/a/coreutils/coreutils.uname.diff @@ -1,15 +1,6 @@ -Submitted By: Jim Gifford <jim at linuxfromscratch dot org> -Date: 2006-08-24 -Initial Package Version: 5.97 -Upstream Status: Not Accepted -Origin: Gentoo - http://sources.gentoo.org/viewcvs.py/gentoo/src/patchsets/coreutils -Description: Display CPU Information from /proc/cpuinfo or /proc/sysinfo - -Original Patch by - Matthew Burgess and Scot McPherson - -diff -Nur coreutils-7.1.orig/src/uname.c coreutils-7.1/src/uname.c ---- coreutils-7.1/src/uname.c 2008-09-18 02:06:57.000000000 -0500 -+++ coreutils-7.1/src/uname.c 2009-02-22 21:23:02.209219703 -0600 +diff -Nur coreutils-7.6.orig/src/uname.c coreutils-7.6/src/uname.c +--- coreutils-7.6.orig/src/uname.c 2009-09-01 06:01:16.000000000 -0500 ++++ coreutils-7.6/src/uname.c 2009-09-15 08:55:26.239452858 -0500 @@ -50,6 +50,11 @@ # include <mach-o/arch.h> #endif @@ -41,87 +32,87 @@ diff -Nur coreutils-7.1.orig/src/uname.c coreutils-7.1/src/uname.c + +static void __eat_cpuinfo_space(char *buf) +{ -+ /* first eat trailing space */ -+ char *tmp = buf + strlen(buf) - 1; -+ while (tmp > buf && isspace(*tmp)) -+ *tmp-- = '\0'; -+ /* then eat leading space */ -+ tmp = buf; -+ while (*tmp && isspace(*tmp)) -+ tmp++; -+ if (tmp != buf) -+ memmove(buf, tmp, strlen(tmp)+1); ++ /* first eat trailing space */ ++ char *tmp = buf + strlen(buf) - 1; ++ while (tmp > buf && isspace(*tmp)) ++ *tmp-- = '\0'; ++ /* then eat leading space */ ++ tmp = buf; ++ while (*tmp && isspace(*tmp)) ++ tmp++; ++ if (tmp != buf) ++ memmove(buf, tmp, strlen(tmp)+1); +} + +static int __linux_procinfo (int x, char *fstr, size_t s) +{ -+ FILE *fp; ++ FILE *fp; + -+ char *procinfo_keys[] = { -+ /* --processor --hardware-platform */ -+ #if defined(__alpha__) -+ "cpu model", "system type" -+ #elif defined(__arm__) -+ "Processor", "Hardware" -+ #elif defined(bfin) -+ "CPU", "BOARD Name" -+ #elif defined(__cris__) -+ "cpu", "cpu model" -+ #elif defined(__frv__) -+ "CPU-Core", "System" -+ #elif defined(__i386__) || defined(__x86_64__) -+ "model name", "vendor_id" -+ #elif defined(__ia64__) -+ "family", "vendor" -+ #elif defined(__hppa__) -+ "cpu", "model" -+ #elif defined(__m68k__) -+ "CPU", "MMU" -+ #elif defined(__mips__) -+ "cpu model", "system type" -+ #elif defined(__powerpc__) || defined(__powerpc64__) -+ "cpu", "machine" -+ #elif defined(__s390__) || defined(__s390x__) -+ "Type", "Manufacturer" -+ #elif defined(__sh__) -+ "cpu type", "machine" -+ #elif defined(sparc) || defined(__sparc__) -+ "type", "cpu" -+ #elif defined(__vax__) -+ "cpu type", "cpu" -+ #else -+ "unknown", "unknown" -+ #endif -+ }; ++ char *procinfo_keys[] = { ++ /* --processor --hardware-platform */ ++ #if defined(__alpha__) ++ "cpu model", "system type" ++ #elif defined(__arm__) ++ "Processor", "Hardware" ++ #elif defined(bfin) ++ "CPU", "BOARD Name" ++ #elif defined(__cris__) ++ "cpu", "cpu model" ++ #elif defined(__frv__) ++ "CPU-Core", "System" ++ #elif defined(__i386__) || defined(__x86_64__) ++ "model name", "vendor_id" ++ #elif defined(__ia64__) ++ "family", "vendor" ++ #elif defined(__hppa__) ++ "cpu", "model" ++ #elif defined(__m68k__) ++ "CPU", "MMU" ++ #elif defined(__mips__) ++ "cpu model", "system type" ++ #elif defined(__powerpc__) || defined(__powerpc64__) ++ "cpu", "machine" ++ #elif defined(__s390__) || defined(__s390x__) ++ "Type", "Manufacturer" ++ #elif defined(__sh__) ++ "cpu type", "machine" ++ #elif defined(sparc) || defined(__sparc__) ++ "type", "cpu" ++ #elif defined(__vax__) ++ "cpu type", "cpu" ++ #else ++ "unknown", "unknown" ++ #endif ++ }; + -+ if ((fp = fopen(CPUINFO_FILE, "r")) != NULL) { -+ char key[65], value[257], eol, *ret = NULL; ++ if ((fp = fopen(CPUINFO_FILE, "r")) != NULL) { ++ char key[65], value[257], eol, *ret = NULL; + -+ while (fscanf(fp, CPUINFO_FORMAT, key, value, &eol) != EOF) { -+ __eat_cpuinfo_space(key); -+ if (!strcmp(key, procinfo_keys[x])) { -+ __eat_cpuinfo_space(value); -+ ret = value; -+ break; -+ } -+ if (eol != '\n') { -+ /* we need two fscanf's here in case the previous -+ * length limit caused us to read right up to the -+ * newline ... doing "%*[^\n]\n" wont eat the newline -+ */ -+ fscanf(fp, "%*[^\n]"); -+ fscanf(fp, "\n"); -+ } -+ } -+ fclose(fp); ++ while (fscanf(fp, CPUINFO_FORMAT, key, value, &eol) != EOF) { ++ __eat_cpuinfo_space(key); ++ if (!strcmp(key, procinfo_keys[x])) { ++ __eat_cpuinfo_space(value); ++ ret = value; ++ break; ++ } ++ if (eol != '\n') { ++ /* we need two fscanf's here in case the previous ++ * length limit caused us to read right up to the ++ * newline ... doing "%*[^\n]\n" wont eat the newline ++ */ ++ fscanf(fp, "%*[^\n]"); ++ fscanf(fp, "\n"); ++ } ++ } ++ fclose(fp); + -+ if (ret) { -+ strncpy(fstr, ret, s); -+ return 0; -+ } -+ } ++ if (ret) { ++ strncpy(fstr, ret, s); ++ return 0; ++ } ++ } + -+ return -1; ++ return -1; +} + +#endif @@ -136,26 +127,26 @@ diff -Nur coreutils-7.1.orig/src/uname.c coreutils-7.1/src/uname.c -#if HAVE_SYSINFO && defined SI_ARCHITECTURE +#if ( HAVE_SYSINFO && defined SI_ARCHITECTURE ) || defined(USE_PROCINFO) { - static char processor[257]; + static char processor[257]; +#if defined(USE_PROCINFO) -+ if (0 <= __linux_procinfo (PROCINFO_PROCESSOR, processor, sizeof processor)) ++ if (0 <= __linux_procinfo (PROCINFO_PROCESSOR, processor, sizeof processor)) +#else - if (0 <= sysinfo (SI_ARCHITECTURE, processor, sizeof processor)) + if (0 <= sysinfo (SI_ARCHITECTURE, processor, sizeof processor)) +#endif - element = processor; + element = processor; } #endif @@ -358,9 +467,13 @@ if (element == unknown) - { - static char hardware_platform[257]; + { + static char hardware_platform[257]; +#if defined(USE_PROCINFO) -+ if (0 <= __linux_procinfo (PROCINFO_HARDWARE_PLATFORM, hardware_platform, sizeof hardware_platform)) ++ if (0 <= __linux_procinfo (PROCINFO_HARDWARE_PLATFORM, hardware_platform, sizeof hardware_platform)) +#else - size_t s = sizeof hardware_platform; - static int mib[] = { CTL_HW, UNAME_HARDWARE_PLATFORM }; - if (sysctl (mib, 2, hardware_platform, &s, 0, 0) >= 0) + size_t s = sizeof hardware_platform; + static int mib[] = { CTL_HW, UNAME_HARDWARE_PLATFORM }; + if (sysctl (mib, 2, hardware_platform, &s, 0, 0) >= 0) +#endif - element = hardware_platform; - } + element = hardware_platform; + } #endif diff --git a/source/a/kbd/sources/kbd-1.15.tar.bz2.sign b/source/a/cpufrequtils/cpufrequtils-007.tar.bz2.sign index 39388b383..0f1c2d05a 100644 --- a/source/a/kbd/sources/kbd-1.15.tar.bz2.sign +++ b/source/a/cpufrequtils/cpufrequtils-007.tar.bz2.sign @@ -2,7 +2,7 @@ Version: GnuPG v1.4.9 (GNU/Linux) Comment: See http://www.kernel.org/signature.html for info -iD8DBQBJj684yGugalF9Dw4RAqQuAJ9fBsk3RWp6BT4UWHjceFn5YuEBygCff3dW -qo/ACrIhyBx/eiZEpao8N4o= -=0zxS +iD8DBQBLUe7ryGugalF9Dw4RAjeTAJ0ZRX3DI6onTBY5uGhNP9xgOrI6TACfcVoa ++S69xcWuAKSnsqVPuZWZhDM= +=gD0S -----END PGP SIGNATURE----- diff --git a/source/n/bluez-libs/bluez-libs.SlackBuild b/source/a/cpufrequtils/cpufrequtils.SlackBuild index e25d346d7..329ab4d3d 100755 --- a/source/n/bluez-libs/bluez-libs.SlackBuild +++ b/source/a/cpufrequtils/cpufrequtils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=bluez-libs -VERSION=${VERSION:-3.36} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +PKGNAM=cpufrequtils +VERSION=${VERSION:-$(echo $(basename $(echo $PKGNAM-*.tar.bz2 | cut -f 2 -d -) .tar.bz2) | cut -f 2 -d -)} +BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP @@ -58,19 +68,12 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Configure: -CFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --mandir=/usr/man \ - --disable-static \ - --build=$ARCH-slackware-linux - # Build and install: -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 +make libdir=/usr/lib${LIBDIRSUFFIX} +make install libdir=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG + +# Don't ship these: +rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.{a,la} # Strip binaries: find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ @@ -85,28 +88,19 @@ if [ -d $PKG/usr/man ]; then ln -s $( readlink $eachpage ).gz $eachpage.gz rm $eachpage done - gzip -9 *.* + gzip -9 *.? ) done ) fi -# Compress info files, if any: -if [ -d $PKG/usr/info ]; then - ( cd $PKG/usr/info - rm -f dir - gzip -9 * - ) -fi - # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING ChangeLog INSTALL NEWS README \ + AUTHORS COPYING* README* \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install -#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG diff --git a/source/a/cpufrequtils/slack-desc b/source/a/cpufrequtils/slack-desc new file mode 100644 index 000000000..2e4b1ac36 --- /dev/null +++ b/source/a/cpufrequtils/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +cpufrequtils: cpufrequtils (Kernel CPUfreq utilities) +cpufrequtils: +cpufrequtils: The cpufrequtils package makes access to the Linux kernel CPUfreq +cpufrequtils: subsystem easier for users and cpufreq userspace tools. It contains +cpufrequtils: a library used by other programs (libcpufreq), and command line tools +cpufrequtils: to determine current CPUfreq settings and to modify them. +cpufrequtils: +cpufrequtils: Dominik Brodowski is the cpufrequtils maintainer. +cpufrequtils: The cpufrequtils page is hosted on kernel.org: +cpufrequtils: http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufreq.html +cpufrequtils: diff --git a/source/a/cryptsetup/cryptsetup.SlackBuild b/source/a/cryptsetup/cryptsetup.SlackBuild index 7a7f3a8ba..35b674aee 100755 --- a/source/a/cryptsetup/cryptsetup.SlackBuild +++ b/source/a/cryptsetup/cryptsetup.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh -# Copyright (c) 2007, 2009 Eric Hameleers <alien@slackware.com> -# Copyright (c) 2007, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright (c) 2007, 2009, 2010 Eric Hameleers <alien@slackware.com> +# Copyright (c) 2007, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -28,15 +28,23 @@ # By: Eric Hameleers <alien@slackware.com> # For: cryptsetup # Descr: Utility for setting up encrypted filesystems -# URL: http://luks.endorphin.org/dm-crypt +# URL: http://code.google.com/p/cryptsetup/ # # ----------------------------------------------------------------------------- -PRGNAM=cryptsetup -VERSION=${VERSION:-1.0.7} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} - +PKGNAM=cryptsetup +VERSION=${VERSION:-1.1.0} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -47,6 +55,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -67,7 +78,6 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -echo Building ... LDFLAGS="$SLKLDFLAGS" \ CFLAGS="$SLKCFLAGS" \ ./configure \ @@ -76,60 +86,40 @@ CFLAGS="$SLKCFLAGS" \ --localstatedir=/var \ --sysconfdir=/etc \ --mandir=/usr/man \ - --enable-libgcrypt \ - --enable-libdevmapper \ - --program-prefix= \ - --program-suffix= \ + --docdir=/usr/doc/cryptsetup-$VERSION \ --build=$ARCH-slackware-linux make make DESTDIR=$PKG install -# -# Next, make the static version that we will use for mkinitrd: -# - -make clean -echo Building ... -LDFLAGS="$SLKLDFLAGS" \ -CFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --localstatedir=/var \ - --sysconfdir=/etc \ - --mandir=/usr/man \ - --enable-libgcrypt \ - --enable-libdevmapper \ - --enable-static \ - --disable-shared \ - --disable-shared-library \ - --program-prefix= \ - --program-suffix= \ - --build=$ARCH-slackware-linux -make - -# I have to do one old-school thing to leave a mark here: +# Move the shared library to $PKG/lib${LIBDIRSUFFIX}: +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + for file in lib*.so.?.* ; do + mv $file ../../lib${LIBDIRSUFFIX} + ln -sf ../../lib${LIBDIRSUFFIX}/$file . + done + cp -a lib*.so.? ../../lib${LIBDIRSUFFIX} +) + +# Move the cryptsetup binary to $PKG/sbin: mkdir -p $PKG/sbin -cat src/cryptsetup > $PKG/sbin/cryptsetup.static -chmod 755 $PKG/sbin/cryptsetup.static - -mv $PKG/usr/sbin/cryptsetup $PKG/usr/sbin/cryptsetup.dynamic -# Replace with a link: -( cd $PKG/usr/sbin ; ln -sf cryptsetup.dynamic cryptsetup ) -# In /sbin, use the static version as /usr *might* not be mounted yet. -# However, note that some cryptsetup operations cause the static -# version to segfault, so for things like formatting you'll want -# to use the dynamic one. That's what should be in the $PATH first. -( cd $PKG/sbin ; ln -sf cryptsetup.static cryptsetup ) - -# Remove unneeded empty directory: -#rmdir $PKG/usr/lib/cryptsetup - -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +( cd $PKG/usr/sbin + mv cryptsetup ../../sbin + ln -sf ../../sbin/cryptsetup . +) + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - AUTHORS COPYING* ChangeLog INSTALL NEWS README TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION -chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/* + AUTHORS COPYING* INSTALL NEWS README TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; || true @@ -140,5 +130,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz diff --git a/source/a/cups/cups.SlackBuild b/source/a/cups/cups.SlackBuild index 5ae070951..1c285c63a 100755 --- a/source/a/cups/cups.SlackBuild +++ b/source/a/cups/cups.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,18 @@ # CUPS build script by volkerdi@slackware.com. -VERSION=1.3.11 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} +VERSION=1.4.3 +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" @@ -33,6 +41,8 @@ else LIBDIRSUFFIX="" fi +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-cups @@ -45,7 +55,8 @@ rm -rf cups-$VERSION tar xvf $CWD/cups-$VERSION-source.tar.?z* || exit 1 cd cups-$VERSION -zcat $CWD/cups.firefox.desktop.diff.gz | patch -p1 --verbose || exit 1 +# Fix the USB backend to use either usblp or libusb: +zcat $CWD/usb-backend-both-usblp-and-libusb.dpatch.gz | patch -p1 --verbose || exit 1 sed -i.orig -e 's#$exec_prefix/lib/cups#$libdir/cups#g' configure ./configure \ @@ -74,6 +85,17 @@ chmod 644 $PKG/etc/rc.d/rc.cups.new # Clear out the additions: rm -rf $PKG/etc/init.d $PKG/etc/rc{0,2,3,5}.d +### OBSOLETE. The USB backend is patched to support usblp again. ### +## From 1.4.x, CUPS no longer uses usblp, and having the module loaded +## will interfere with USB printers. So, we will add a blacklist rule +## so that the module is not loaded: +#mkdir -p $PKG/etc/modprobe.d +#cat << EOF > $PKG/etc/modprobe.d/cups.blacklist.usblp.conf.new +## Do not load the kernel usblp module, since it interferes with +## versions of CUPS 1.4.0 and newer: +#blacklist usblp +#EOF + # I'm not sure if overwriting this blindly could have ill effects, # but it never hurts to play it safe. According to the dbus-daemon # manpage, only files ending in .conf will be used, so there won't @@ -110,6 +132,14 @@ cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG/usr/doc ln -sf cups-$VERSION cups ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES.txt ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES.txt | head -n 1000 > $DOCSDIR/CHANGES.txt + touch -r CHANGES.txt $DOCSDIR/CHANGES.txt +fi + # I'm sorry, but PDF files are almost as bloated and annoying as # MS Word documents. We'll retain the HTML files in /usr/doc. ( cd $PKG/usr/doc diff --git a/source/a/cups/cups.firefox.desktop.diff b/source/a/cups/cups.firefox.desktop.diff deleted file mode 100644 index 96affd5a3..000000000 --- a/source/a/cups/cups.firefox.desktop.diff +++ /dev/null @@ -1,11 +0,0 @@ -diff -u -r --new-file cups-1.3.11.orig/desktop/cups.desktop cups-1.3.11/desktop/cups.desktop ---- cups-1.3.11.orig/desktop/cups.desktop 2008-09-05 19:30:39.000000000 -0500 -+++ cups-1.3.11/desktop/cups.desktop 2009-08-21 20:18:23.604682681 -0500 -@@ -1,6 +1,6 @@ - [Desktop Entry] - Categories=System;Printing;HardwareSettings;X-Red-Hat-Base; --Exec=htmlview http://localhost:631/ -+Exec=firefox http://localhost:631/ - Icon=cups - StartupNotify=false - Terminal=false diff --git a/source/a/cups/doinst.sh b/source/a/cups/doinst.sh index 3f56dab3f..6807cc3ac 100644 --- a/source/a/cups/doinst.sh +++ b/source/a/cups/doinst.sh @@ -14,6 +14,12 @@ for file in etc/cups/*.new ; do done config etc/dbus-1/system.d/cups.conf.new +# This file will just have to go. It appeared for a while during a -current +# devel period and has never been part of a stable release. +#config etc/modprobe.d/cups.blacklist.usblp.conf.new +rm -f etc/modprobe.d/cups.blacklist.usblp.conf.new +rm -f etc/modprobe.d/cups.blacklist.usblp.conf + # Leave any new rc.cups with the same permissions as the old one: # This is a kludge, but it's because there's no --reference option # on busybox's 'chmod': diff --git a/source/a/cups/usb-backend-both-usblp-and-libusb.dpatch b/source/a/cups/usb-backend-both-usblp-and-libusb.dpatch new file mode 100644 index 000000000..88ae9d077 --- /dev/null +++ b/source/a/cups/usb-backend-both-usblp-and-libusb.dpatch @@ -0,0 +1,574 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## usb-backend-both-usblp-and-libusb.dpatch by <till.kamppeter@gmail.com> +## +## DP: http://www.cups.org/str.php?L3357 + +@DPATCH@ +diff -urNad cups-1.4.3~/backend/Makefile cups-1.4.3/backend/Makefile +--- cups-1.4.3~/backend/Makefile 2010-04-09 15:56:03.735720821 +0200 ++++ cups-1.4.3/backend/Makefile 2010-04-09 15:56:04.335705387 +0200 +@@ -267,7 +267,7 @@ + echo Linking $@... + $(CC) $(LDFLAGS) -o usb usb.o libbackend.a $(LIBUSB) \ + $(BACKLIBS) $(LIBS) +-usb.o: usb.c usb-darwin.c usb-libusb.c usb-unix.c ++usb.o: usb.c usb-darwin.c usb-hybrid.c usb-libusb.c usb-unix.c + + + # +diff -urNad cups-1.4.3~/backend/ieee1284.c cups-1.4.3/backend/ieee1284.c +--- cups-1.4.3~/backend/ieee1284.c 2009-12-08 03:13:42.000000000 +0100 ++++ cups-1.4.3/backend/ieee1284.c 2010-04-09 15:56:04.335705387 +0200 +@@ -255,6 +255,7 @@ + cups_option_t *values; /* Keys and values in device ID */ + const char *mfg, /* Manufacturer */ + *mdl, /* Model */ ++ *des, /* Description */ + *sern; /* Serial number */ + char temp[256], /* Temporary manufacturer string */ + *tempptr; /* Pointer into temp string */ +@@ -285,10 +286,20 @@ + } + else + { +- strlcpy(temp, make_model, sizeof(temp)); ++ /* ++ * No manufacturer? Use the model string or description... ++ */ ++ ++ if (mdl) ++ _ppdNormalizeMakeAndModel(mdl, temp, sizeof(temp)); ++ else if ((des = cupsGetOption("DESCRIPTION", num_values, values)) != NULL || ++ (des = cupsGetOption("DES", num_values, values)) != NULL) ++ _ppdNormalizeMakeAndModel(des, temp, sizeof(temp)); ++ else ++ strlcpy(temp, "Unknown", sizeof(temp)); + + if ((tempptr = strchr(temp, ' ')) != NULL) +- *tempptr = '\0'; ++ *tempptr = '\0'; + + mfg = temp; + } +diff -urNad cups-1.4.3~/backend/usb-hybrid.c cups-1.4.3/backend/usb-hybrid.c +--- cups-1.4.3~/backend/usb-hybrid.c 1970-01-01 01:00:00.000000000 +0100 ++++ cups-1.4.3/backend/usb-hybrid.c 2010-04-09 15:56:04.345707078 +0200 +@@ -0,0 +1,87 @@ ++/* ++ * "$Id: usb-hybrid.c 8807 2009-08-31 18:45:43Z mike $" ++ * ++ * USB port backend for the Common UNIX Printing System (CUPS). ++ * ++ * This file is included from "usb.c" when compiled on Linux. ++ * ++ * Copyright 2007-2008 by Apple Inc. ++ * Copyright 1997-2007 by Easy Software Products, all rights reserved. ++ * ++ * These coded instructions, statements, and computer programs are the ++ * property of Apple Inc. and are protected by Federal copyright ++ * law. Distribution and use rights are outlined in the file "LICENSE.txt" ++ * "LICENSE" which should have been included with this file. If this ++ * file is missing or damaged, see the license at "http://www.cups.org/". ++ * ++ * This file is subject to the Apple OS-Developed Software exception. ++ * ++ * Contents: ++ * ++ * print_device() - Print a file to a USB device. ++ * list_devices() - List all USB devices. ++ */ ++ ++/* ++ * Include necessary headers. ++ */ ++ ++#include <sys/select.h> ++ ++/* ++ * Include the two USB implementations used under Linux ... ++ */ ++ ++#include "usb-libusb.c" ++#include "usb-unix.c" ++ ++/* ++ * 'print_device()' - Print a file to a USB device. ++ */ ++ ++int /* O - Exit status */ ++print_device(const char *uri, /* I - Device URI */ ++ const char *hostname, /* I - Hostname/manufacturer */ ++ const char *resource, /* I - Resource/modelname */ ++ char *options, /* I - Device options/serial number */ ++ int print_fd, /* I - File descriptor to print */ ++ int copies, /* I - Copies to print */ ++ int argc, /* I - Number of command-line arguments (6 or 7) */ ++ char *argv[]) /* I - Command-line arguments */ ++{ ++ int result; ++ for(;;) ++ { ++ result = print_device_unix(uri, hostname, resource, options, print_fd, ++ copies, argc, argv); ++ if (result == -1) ++ { ++ result = print_device_libusb(uri, hostname, resource, options, print_fd, ++ copies, argc, argv); ++ if (result == -1) ++ sleep(5); ++ else ++ return(result); ++ } ++ else ++ return(result); ++ } ++} ++ ++/* ++ * 'list_devices()' - List all USB devices. ++ */ ++ ++void ++list_devices(void) ++{ ++ /* Try both discovery methods, each device will appear only under one ++ of them */ ++ list_devices_libusb(); ++ list_devices_unix(); ++} ++ ++ ++/* ++ * End of "$Id: usb-hybrid.c 8807 2009-08-31 18:45:43Z mike $". ++ */ +diff -urNad cups-1.4.3~/backend/usb-libusb.c cups-1.4.3/backend/usb-libusb.c +--- cups-1.4.3~/backend/usb-libusb.c 2009-09-11 22:03:31.000000000 +0200 ++++ cups-1.4.3/backend/usb-libusb.c 2010-04-09 15:56:04.345707078 +0200 +@@ -13,16 +13,16 @@ + * + * Contents: + * +- * list_devices() - List the available printers. +- * print_device() - Print a file to a USB device. ++ * list_devices_libusb() - List the available printers. ++ * print_device_libusb() - Print a file to a USB device. + * close_device() - Close the connection to the USB printer. + * find_device() - Find or enumerate USB printers. + * get_device_id() - Get the IEEE-1284 device ID for the printer. + * list_cb() - List USB printers for discovery. + * make_device_uri() - Create a device URI for a USB printer. +- * open_device() - Open a connection to the USB printer. ++ * open_device_libusb() - Open a connection to the USB printer. + * print_cb() - Find a USB printer for printing. +- * side_cb() - Handle side-channel requests. ++ * side_cb_libusb() - Handle side-channel requests. + */ + + /* +@@ -65,30 +65,30 @@ + static char *make_device_uri(usb_printer_t *printer, + const char *device_id, + char *uri, size_t uri_size); +-static int open_device(usb_printer_t *printer, int verbose); ++static int open_device_libusb(usb_printer_t *printer, int verbose); + static int print_cb(usb_printer_t *printer, const char *device_uri, + const char *device_id, const void *data); +-static ssize_t side_cb(usb_printer_t *printer, int print_fd); ++static ssize_t side_cb_libusb(usb_printer_t *printer, int print_fd); + + + /* +- * 'list_devices()' - List the available printers. ++ * 'list_devices_libusb()' - List the available printers. + */ + + void +-list_devices(void) ++list_devices_libusb(void) + { +- fputs("DEBUG: list_devices\n", stderr); ++ fputs("DEBUG: list_devices_libusb\n", stderr); + find_device(list_cb, NULL); + } + + + /* +- * 'print_device()' - Print a file to a USB device. ++ * 'print_device_libusb()' - Print a file to a USB device. + */ + + int /* O - Exit status */ +-print_device(const char *uri, /* I - Device URI */ ++print_device_libusb(const char *uri, /* I - Device URI */ + const char *hostname, /* I - Hostname/manufacturer */ + const char *resource, /* I - Resource/modelname */ + char *options, /* I - Device options/serial number */ +@@ -105,19 +105,23 @@ + struct pollfd pfds[2]; /* Poll descriptors */ + + +- fputs("DEBUG: print_device\n", stderr); ++ fputs("DEBUG: print_device_libusb\n", stderr); + + /* + * Connect to the printer... + */ + ++#if defined(__linux) || defined(__sun) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) || defined(__FreeBSD_kernel__) ++ if ((printer = find_device(print_cb, uri)) == NULL) ++ return(-1); ++#else + while ((printer = find_device(print_cb, uri)) == NULL) + { + _cupsLangPuts(stderr, + _("INFO: Waiting for printer to become available...\n")); + sleep(5); + } +- ++#endif + + /* + * If we are printing data from a print driver on stdin, ignore SIGTERM +@@ -189,7 +193,7 @@ + + if (pfds[1].revents & (POLLIN | POLLHUP)) + { +- if ((bytes = side_cb(printer, print_fd)) < 0) ++ if ((bytes = side_cb_libusb(printer, print_fd)) < 0) + pfds[1].events = 0; /* Filter has gone away... */ + else + tbytes += bytes; +@@ -359,7 +363,7 @@ + printer.iface = iface; + printer.handle = NULL; + +- if (!open_device(&printer, data != NULL)) ++ if (!open_device_libusb(&printer, data != NULL)) + { + if (!get_device_id(&printer, device_id, sizeof(device_id))) + { +@@ -583,6 +587,14 @@ + mfg = tempmfg; + } + ++ if (!strncasecmp(mdl, mfg, strlen(mfg))) ++ { ++ mdl += strlen(mfg); ++ ++ while (isspace(*mdl & 255)) ++ mdl ++; ++ } ++ + /* + * Generate the device URI from the manufacturer, model, serial number, + * and interface number... +@@ -611,11 +623,11 @@ + + + /* +- * 'open_device()' - Open a connection to the USB printer. ++ * 'open_device_libusb()' - Open a connection to the USB printer. + */ + + static int /* O - 0 on success, -1 on error */ +-open_device(usb_printer_t *printer, /* I - Printer */ ++open_device_libusb(usb_printer_t *printer, /* I - Printer */ + int verbose) /* I - Update connecting-to-device state? */ + { + int number; /* Configuration/interface/altset numbers */ +@@ -733,16 +745,73 @@ + const char *device_id, /* I - IEEE-1284 device ID */ + const void *data) /* I - User data (make, model, S/N) */ + { +- return (!strcmp((char *)data, device_uri)); ++ char *uri = (char *)data, ++ *str1, ++ *str2, ++ buf[255], ++ requested_uri[1024]; ++ ++ /* Work on a copy of uri */ ++ strncpy(requested_uri, uri, sizeof(requested_uri)); ++ requested_uri[sizeof(requested_uri) - 1] = '\0'; ++ ++ /* ++ * libusb-discovered URIs can have an "interface" specification and this ++ * never happens for usblp-discovered URIs, so remove the "interface" ++ * specification from the URI which we are checking currently. This way a ++ * queue for a usblp-discovered printer can now be accessed via libusb ++ */ ++ if (((str1 = strstr(requested_uri, "interface=")) == NULL) && ++ ((str2 = strstr(device_uri, "interface=")) != NULL)) ++ { ++ *(str2 - 1) = '\0'; ++ } ++ ++ /* ++ * Old URI with "serial=?". Cut this part off and consider this as ++ * an URI without serial number ++ */ ++ if ((str1 = strstr(requested_uri, "serial=?")) != NULL) ++ *(str1 - 1) = '\0'; ++ ++ /* ++ * Old URI without serial number. Match it also with URIs with serial ++ * number ++ */ ++ if (((str1 = strstr(requested_uri, "serial=")) == NULL) && ++ ((str2 = strstr(device_uri, "serial=")) != NULL)) ++ *(str2 - 1) = '\0'; ++ ++ /* ++ * libusb-discovered URIs can have a "serial" specification when the ++ * usblp-discovered URI for the same printer does not have one, as ++ * with libusb we can discover serial numbers also with other methods ++ * than only via the device ID. Therefore we accept also a ++ * usblp-discovered printer without serial number as a match. This we ++ * do by removing the serial number from the queue's (libusb-discovered) ++ * URI before comparing. Also warn the user because of the incapability ++ * of the usblp-based access to distinguish printers by the serial ++ * number. ++ */ ++ if (((str1 = strstr(requested_uri, "serial=")) == NULL) && ++ ((str2 = strstr(device_uri, "serial=")) != NULL)) ++ { ++ *(str2 - 1) = '\0'; ++ if (backendGetMakeModel(device_id, buf, sizeof(buf)) == 0) ++ fprintf(stderr, "WARNING: If you have more than one %s printer connected to this machine, please make sure that the \"usblp\" kernel module is always unloaded (and blacklisted) and re-create the queues for these printers. Otherwise CUPS will not be able to distinguish them.\n", ++ buf); ++ } ++ ++ return (!strcmp(requested_uri, device_uri)); + } + + + /* +- * 'side_cb()' - Handle side-channel requests. ++ * 'side_cb_libusb()' - Handle side-channel requests. + */ + + static ssize_t /* O - Number of bytes written */ +-side_cb(usb_printer_t *printer, /* I - Printer */ ++side_cb_libusb(usb_printer_t *printer, /* I - Printer */ + int print_fd) /* I - File to print */ + { + ssize_t bytes, /* Bytes read/written */ +diff -urNad cups-1.4.3~/backend/usb-unix.c cups-1.4.3/backend/usb-unix.c +--- cups-1.4.3~/backend/usb-unix.c 2009-12-08 03:13:42.000000000 +0100 ++++ cups-1.4.3/backend/usb-unix.c 2010-04-09 15:56:30.799666933 +0200 +@@ -18,10 +18,10 @@ + * + * Contents: + * +- * print_device() - Print a file to a USB device. +- * list_devices() - List all USB devices. +- * open_device() - Open a USB device... +- * side_cb() - Handle side-channel requests... ++ * print_device_unix() - Print a file to a USB device. ++ * list_devices_unix() - List all USB devices. ++ * open_device_unix() - Open a USB device... ++ * side_cb_unix() - Handle side-channel requests... + */ + + /* +@@ -35,17 +35,17 @@ + * Local functions... + */ + +-static int open_device(const char *uri, int *use_bc); +-static int side_cb(int print_fd, int device_fd, int snmp_fd, ++static int open_device_unix(const char *uri, int *use_bc); ++static int side_cb_unix(int print_fd, int device_fd, int snmp_fd, + http_addr_t *addr, int use_bc); + + + /* +- * 'print_device()' - Print a file to a USB device. ++ * 'print_device_unix()' - Print a file to a USB device. + */ + + int /* O - Exit status */ +-print_device(const char *uri, /* I - Device URI */ ++print_device_unix(const char *uri, /* I - Device URI */ + const char *hostname, /* I - Hostname/manufacturer */ + const char *resource, /* I - Resource/modelname */ + char *options, /* I - Device options/serial number */ +@@ -102,7 +102,7 @@ + strncasecmp(hostname, "Minolta", 7); + #endif /* __FreeBSD__ || __NetBSD__ || __OpenBSD__ || __DragonFly__ */ + +- if ((device_fd = open_device(uri, &use_bc)) == -1) ++ if ((device_fd = open_device_unix(uri, &use_bc)) == -1) + { + if (getenv("CLASS") != NULL) + { +@@ -132,6 +132,10 @@ + _("INFO: Printer busy; will retry in 10 seconds...\n")); + sleep(10); + } ++#ifdef HAVE_USB_H ++ else ++ return (-1); ++#else + else if (errno == ENXIO || errno == EIO || errno == ENOENT || + errno == ENODEV) + { +@@ -147,6 +151,7 @@ + resource, strerror(errno)); + return (CUPS_BACKEND_FAILED); + } ++#endif + } + } + while (device_fd < 0); +@@ -190,7 +195,7 @@ + tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, NULL); + + #else +- tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, side_cb); ++ tbytes = backendRunLoop(print_fd, device_fd, -1, NULL, use_bc, 1, side_cb_unix); + #endif /* __sun */ + + if (print_fd != 0 && tbytes >= 0) +@@ -214,11 +219,11 @@ + + + /* +- * 'list_devices()' - List all USB devices. ++ * 'list_devices_unix()' - List all USB devices. + */ + + void +-list_devices(void) ++list_devices_unix(void) + { + #ifdef __linux + int i; /* Looping var */ +@@ -320,11 +325,11 @@ + + + /* +- * 'open_device()' - Open a USB device... ++ * 'open_device_unix()' - Open a USB device... + */ + + static int /* O - File descriptor or -1 on error */ +-open_device(const char *uri, /* I - Device URI */ ++open_device_unix(const char *uri, /* I - Device URI */ + int *use_bc) /* O - Set to 0 for unidirectional */ + { + int fd; /* File descriptor */ +@@ -357,9 +362,12 @@ + char device[255], /* Device filename */ + device_id[1024], /* Device ID string */ + make_model[1024], /* Make and model */ +- device_uri[1024]; /* Device URI string */ +- ++ device_uri[1024], /* Device URI string */ ++ requested_uri[1024], /* Device URI string */ ++ *str1, ++ *str2; + ++ + /* + * Find the correct USB device... + */ +@@ -407,7 +415,55 @@ + device_uri[0] = '\0'; + } + +- if (!strcmp(uri, device_uri)) ++ /* Work on a copy of uri */ ++ strncpy(requested_uri, uri, sizeof(requested_uri)); ++ requested_uri[sizeof(requested_uri) - 1] = '\0'; ++ ++ /* ++ * libusb-discovered URIs can have an "interface" specification and this ++ * never happens for usblp-discovered URIs, so remove the "interface" ++ * specification from the URI of the print queue. This way a queue for ++ * a libusb-discovered printer can now be accessed via the usblip kernel ++ * module ++ */ ++ if ((str1 = strstr(requested_uri, "interface=")) != NULL) ++ *(str1 - 1) = '\0'; ++ ++ /* ++ * Old URI with "serial=?". Cut this part off and consider this as ++ * an URI without serial number ++ */ ++ if ((str1 = strstr(requested_uri, "serial=?")) != NULL) ++ *(str1 - 1) = '\0'; ++ ++ /* ++ * Old URI without serial number. Match it also with URIs with serial ++ * number ++ */ ++ if (((str1 = strstr(requested_uri, "serial=")) == NULL) && ++ ((str2 = strstr(device_uri, "serial=")) != NULL)) ++ *(str2 - 1) = '\0'; ++ ++ /* ++ * libusb-discovered URIs can have a "serial" specification when the ++ * usblp-discovered URI for the same printer does not have one, as ++ * with libusb we can discover serial numbers also with other methods ++ * than only via the device ID. Therefore we accept also a ++ * usblp-discovered printer without serial number as a match. This we ++ * do by removing the serial number from the queue's (libusb-discovered) ++ * URI before comparing. Also warn the user because of the incapability ++ * of the usblp-based access to distinguish printers by the serial ++ * number. ++ */ ++ if (((str1 = strstr(requested_uri, "serial=")) != NULL) && ++ ((str2 = strstr(device_uri, "serial=")) == NULL)) ++ { ++ *(str1 - 1) = '\0'; ++ fprintf(stderr, "WARNING: If you have more than one %s printer connected to this machine, please unload (and blacklist) the \"usblp\" kernel module as otherwise CUPS will not be able to distinguish your printers.\n", ++ make_model); ++ } ++ ++ if (!strcmp(requested_uri, device_uri)) + { + /* + * Yes, return this file descriptor... +@@ -433,10 +489,14 @@ + */ + + if (busy) ++ { + _cupsLangPuts(stderr, + _("INFO: Printer busy; will retry in 5 seconds...\n")); + +- sleep(5); ++ sleep(5); ++ } ++ else ++ return -1; + } + } + #elif defined(__sun) && defined(ECPPIOC_GETDEVID) +@@ -557,11 +617,11 @@ + + + /* +- * 'side_cb()' - Handle side-channel requests... ++ * 'side_cb_unix()' - Handle side-channel requests... + */ + + static int /* O - 0 on success, -1 on error */ +-side_cb(int print_fd, /* I - Print file */ ++side_cb_unix(int print_fd, /* I - Print file */ + int device_fd, /* I - Device file */ + int snmp_fd, /* I - SNMP socket (unused) */ + http_addr_t *addr, /* I - Device address (unused) */ +diff -urNad cups-1.4.3~/backend/usb.c cups-1.4.3/backend/usb.c +--- cups-1.4.3~/backend/usb.c 2008-06-24 03:28:36.000000000 +0200 ++++ cups-1.4.3/backend/usb.c 2010-04-09 15:56:04.345707078 +0200 +@@ -56,7 +56,7 @@ + */ + + #ifdef HAVE_USB_H +-# include "usb-libusb.c" ++# include "usb-hybrid.c" + #elif defined(__APPLE__) + # include "usb-darwin.c" + #elif defined(__linux) || defined(__sun) || defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) || defined(__FreeBSD_kernel__) diff --git a/source/a/cxxlibs/cxxlibs.SlackBuild b/source/a/cxxlibs/cxxlibs.SlackBuild index 025a64949..19f8042ed 100755 --- a/source/a/cxxlibs/cxxlibs.SlackBuild +++ b/source/a/cxxlibs/cxxlibs.SlackBuild @@ -1,5 +1,5 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,18 @@ PKGNAM=cxxlibs -VERSION=${VERSION:-6.0.10} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +VERSION=${VERSION:-6.0.13} +BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" diff --git a/source/a/dbus/dbus-1.2.x-allow_root_globally.diff b/source/a/dbus/dbus-1.2.x-allow_root_globally.diff new file mode 100644 index 000000000..913a9d2b1 --- /dev/null +++ b/source/a/dbus/dbus-1.2.x-allow_root_globally.diff @@ -0,0 +1,22 @@ +Allow root to do anything via dbus method calls, since users expect root + to be, well, root. This removes the insanity of adding root to all sorts + of system groups in /etc/group. --rworkman 20091031 + +diff -Nur dbus-1.2.16.orig/bus/system.conf.in dbus-1.2.16/bus/system.conf.in +--- dbus-1.2.16.orig/bus/system.conf.in 2009-07-13 05:14:40.000000000 -0500 ++++ dbus-1.2.16/bus/system.conf.in 2009-10-31 00:47:34.338981143 -0500 +@@ -70,6 +70,14 @@ + send_member="UpdateActivationEnvironment"/> + </policy> + ++ <!-- Allow root to do anything over the messagebus. ++ Don't whine about "security" - anyone with root privileges ++ can edit this file anyway, so -ENOHOLE here. --> ++ <policy user="root"> ++ <allow send_destination="*"/> ++ <allow send_interface="*"/> ++ </policy> ++ + <!-- Config files are placed here that among other things, punch + holes in the above policy for specific services. --> + <includedir>system.d</includedir> diff --git a/source/a/dbus/dbus.SlackBuild b/source/a/dbus/dbus.SlackBuild index c761ce54c..533ccd897 100755 --- a/source/a/dbus/dbus.SlackBuild +++ b/source/a/dbus/dbus.SlackBuild @@ -1,6 +1,7 @@ #!/bin/sh -# Copyright 2007, 2008 Robby Workman <http://rlworkman.net> -# Copyright 2007, 2008, 2009 Patrick Volkerding, Sebeka, MN, USA + +# Copyright 2007-2010 Robby Workman, Northport, Alabama, USA +# Copyright 2007-2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,16 +21,25 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=dbus -VERSION=1.2.14 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +PKGNAM=dbus +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -40,14 +50,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.xz || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -55,6 +68,8 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +zcat $CWD/dbus-1.2.x-allow_root_globally.diff.gz | patch -p1 --verbose || exit 1 + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ @@ -64,9 +79,10 @@ CXXFLAGS="$SLKCFLAGS" \ --localstatedir=/var \ --mandir=/usr/man \ --infodir=/usr/info \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --enable-shared=yes \ --enable-static=no \ + --enable-inotify \ --with-system-pid-file=/var/run/dbus/dbus.pid \ --with-system-socket=/var/run/dbus/system_bus_socket \ --with-init-scripts=slackware \ @@ -96,16 +112,16 @@ mv $PKG/etc/dbus-1/system.conf $PKG/etc/dbus-1/system.conf.new chown messagebus $PKG/var/lib/dbus # Add documentation -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING HACKING INSTALL NEWS README doc/*.{txt,html,dtd} \ - $PKG/usr/doc/$PRGNAM-$VERSION -find $PKG/usr/doc/$PRGNAM-$VERSION -type f -exec chmod 644 {} \; + $PKG/usr/doc/$PKGNAM-$VERSION +find $PKG/usr/doc/$PKGNAM-$VERSION -type f -exec chmod 644 {} \; mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/dcron/crontab.c.O_EXCL.diff b/source/a/dcron/crontab.c.O_EXCL.diff new file mode 100644 index 000000000..7acd5ce29 --- /dev/null +++ b/source/a/dcron/crontab.c.O_EXCL.diff @@ -0,0 +1,11 @@ +--- ./crontab.c.orig 2010-01-18 09:27:31.000000000 -0600 ++++ ./crontab.c 2010-02-11 16:38:03.000000000 -0600 +@@ -199,7 +199,7 @@ + * Read from repFd, write to fd for "$CDir/$USER.new" + */ + snprintf(path, sizeof(path), "%s.new", pas->pw_name); +- if ((fd = open(path, O_CREAT|O_TRUNC|O_EXCL|O_APPEND|O_WRONLY, 0600)) >= 0) { ++ if ((fd = open(path, O_CREAT|O_TRUNC|O_APPEND|O_WRONLY, 0600)) >= 0) { + while ((n = read(repFd, buf, sizeof(buf))) > 0) { + write(fd, buf, n); + } diff --git a/source/a/dcron/crontab.root b/source/a/dcron/crontab.root new file mode 100644 index 000000000..b5b425628 --- /dev/null +++ b/source/a/dcron/crontab.root @@ -0,0 +1,22 @@ +# If you don't want the output of a cron job mailed to you, you have to direct +# any output to /dev/null. We'll do this here since these jobs should run +# properly on a newly installed system, but if they don't the average newbie +# might get quite perplexed about getting strange mail every 5 minutes. :^) +# +# Run the hourly, daily, weekly, and monthly cron jobs. +# Jobs that need different timing may be entered into the crontab as before, +# but most really don't need greater granularity than this. If the exact +# times of the hourly, daily, weekly, and monthly cron jobs do not suit your +# needs, feel free to adjust them. +# +# Run hourly cron jobs at 47 minutes after the hour: +47 * * * * /usr/bin/run-parts /etc/cron.hourly 1> /dev/null +# +# Run daily cron jobs at 4:40 every day: +40 4 * * * /usr/bin/run-parts /etc/cron.daily 1> /dev/null +# +# Run weekly cron jobs at 4:30 on the first day of the week: +30 4 * * 0 /usr/bin/run-parts /etc/cron.weekly 1> /dev/null +# +# Run monthly cron jobs at 4:20 on the first day of the month: +20 4 1 * * /usr/bin/run-parts /etc/cron.monthly 1> /dev/null diff --git a/source/a/dcron/dcron-2.3.3.crontab.diff4 b/source/a/dcron/dcron-2.3.3.crontab.diff4 deleted file mode 100644 index 30d0501a0..000000000 --- a/source/a/dcron/dcron-2.3.3.crontab.diff4 +++ /dev/null @@ -1,19 +0,0 @@ ---- ./crontab.c.orig Wed Feb 20 14:31:32 2002 -+++ ./crontab.c Wed Feb 20 14:33:13 2002 -@@ -197,14 +197,14 @@ - int n; - - snprintf(path, sizeof(path), "%s.new", pas->pw_name); -- if ((fd = open(path, O_CREAT|O_TRUNC|O_EXCL|O_APPEND|O_WRONLY, 0600)) >= 0) { -+ if ((fd = open(path, O_CREAT|O_TRUNC|O_APPEND|O_WRONLY, 0600)) >= 0) { - while ((n = read(repFd, buf, sizeof(buf))) > 0) { - write(fd, buf, n); - } - close(fd); - rename(path, pas->pw_name); - } else { -- fprintf(stderr, "unable to create %s/%s\n", CDir, buf); -+ fprintf(stderr, "unable to create %s/%s\n", CDir, path); - } - close(repFd); - } diff --git a/source/a/dcron/dcron-2.3.3.diff b/source/a/dcron/dcron-2.3.3.diff deleted file mode 100644 index 22806de3e..000000000 --- a/source/a/dcron/dcron-2.3.3.diff +++ /dev/null @@ -1,40 +0,0 @@ ---- ./defs.h.orig Fri Sep 5 14:44:32 1997 -+++ ./defs.h Thu Aug 26 16:56:10 1999 -@@ -29,7 +29,7 @@ - #define CRONTABS "/var/spool/cron/crontabs" - #endif - #ifndef TMPDIR --#define TMPDIR "/tmp" -+#define TMPDIR "/var/spool/cron" - #endif - #ifndef OPEN_MAX - #define OPEN_MAX 256 ---- ./subs.c.orig Mon Feb 16 13:35:10 1998 -+++ ./subs.c Thu Aug 26 16:57:21 1999 -@@ -15,7 +15,7 @@ - Prototype int ChangeUser(const char *user, short dochdir); - Prototype void vlog(int level, int fd, const char *ctl, va_list va); - Prototype int slog(char *buf, size_t sz, const char *ctl, va_list va, short useDate); --Prototype char *strdup(const char *); -+Prototype char *xx_strdup(const char *); - - void - log9(const char *ctl, ...) -@@ -80,7 +80,7 @@ - - buf[0] = 0; - if (useDate) -- strftime(buf, 128, "%d-%b-%y %H:%M ", tp); -+ strftime(buf, 128, "%d-%b-%Y %H:%M ", tp); - vsnprintf(buf + strlen(buf), sz - strlen(buf), ctl, va); - return(strlen(buf)); - } -@@ -132,7 +132,7 @@ - } - - char * --strdup(const char *str) -+xx_strdup(const char *str) - { - char *ptr = malloc(strlen(str) + 1); - diff --git a/source/a/dcron/dcron-2.3.3.diff2 b/source/a/dcron/dcron-2.3.3.diff2 deleted file mode 100644 index 8eb8242c5..000000000 --- a/source/a/dcron/dcron-2.3.3.diff2 +++ /dev/null @@ -1,477 +0,0 @@ ---- ./CHANGES:1.1 Fri Jan 7 18:15:59 2000 -+++ ./CHANGES Thu Apr 20 12:10:36 2000 -@@ -1,3 +1,15 @@ -+20/03/00 - TEMHOTA <temnota@kmv.ru> -+ Adding SIGHUP signal handler. crond die when init send to it SIGHUP. -+ Rewrtited all loging code. Added logging through syslog and normal -+ logging to file. -+ -+ Technical details: -+ + logging through syslog used facility LOG_CRON -+ + log_err - now *always* write message to logger (if selected logging -+ through syslog - message send as LOG_ERR). -+ + log9 - sends message hrough syslog loglevel LOG_WARNING -+ + for all other log levels - default syslog loglevel LOG_NOTICE -+ - 02/16/98 - Jordan Mendelson (jordy@wserv.com) - - Numerous people have reported a problem with logging. I'm sorry ---- ./Makefile:1.1 Fri Jan 7 18:15:59 2000 -+++ ./Makefile Thu Apr 20 12:24:40 2000 -@@ -27,7 +27,7 @@ - rm -f crond crontab - - cleano: -- rm -f *.o dcron.tgz $(PROTOS) -+ rm -f *.o dcron.tgz $(PROTOS) *~ - - install: crond crontab - install -o root -g root -m 0755 crond /usr/sbin ---- ./crontab.c:1.1 Fri Jan 7 18:15:59 2000 -+++ ./crontab.c Sun Mar 19 15:03:36 2000 -@@ -15,6 +15,9 @@ - char *CDir = CRONTABS; - int UserId; - short LogLevel = 9; -+short DebugOpt = 0; -+short LoggerOpt = 0; -+char *LogFile = LOG_FILE; - - void EditFile(const char *user, const char *file); - int GetReplaceStream(const char *user, const char *file); -@@ -136,7 +139,7 @@ - */ - - if (chdir(CDir) < 0) { -- fprintf(stderr, "cannot change diir to %s: %s\n", CDir, strerror(errno)); -+ fprintf(stderr, "cannot change dir to %s: %s\n", CDir, strerror(errno)); - exit(1); - } - ---- ./defs.h:1.1 Fri Jan 7 18:15:59 2000 -+++ ./defs.h Sun Mar 19 15:03:36 2000 -@@ -17,6 +17,9 @@ - #include <pwd.h> - #include <unistd.h> - #include <grp.h> -+#include <syslog.h> -+#include <signal.h> -+#include <getopt.h> - #include <sys/ioctl.h> - #include <sys/wait.h> - #include <sys/stat.h> -@@ -30,6 +33,9 @@ - #endif - #ifndef TMPDIR - #define TMPDIR "/var/spool/cron" -+#endif -+#ifndef LOG_FILE -+#define LOG_FILE "/var/log/cron" - #endif - #ifndef OPEN_MAX - #define OPEN_MAX 256 ---- ./job.c:1.1 Fri Jan 7 18:15:59 2000 -+++ ./job.c Thu Apr 20 12:10:36 2000 -@@ -16,7 +16,7 @@ - { - char mailFile[128]; - int mailFd; -- -+ - line->cl_Pid = 0; - line->cl_MailFlag = 0; - -@@ -57,14 +57,6 @@ - log(5, "Child Running %s\n", line->cl_Shell); - - /* -- * Setup close-on-exec descriptor in case exec fails -- */ -- -- dup2(2, 8); -- fcntl(8, F_SETFD, 1); -- fclose(stderr); -- -- /* - * stdin is already /dev/null, setup stdout and stderr - */ - -@@ -73,13 +65,13 @@ - dup2(mailFd, 2); - close(mailFd); - } else { -- logfd(8, "unable to create mail file user %s file %s, output to /dev/null\n", -+ log_err("unable to create mail file user %s file %s, output to /dev/null\n", - file->cf_User, - mailFile - ); - } - execl("/bin/sh", "/bin/sh", "-c", line->cl_Shell, NULL, NULL); -- logfd(8, "unable to exec, user %s cmd /bin/sh -c %s\n", -+ log_err("unable to exec, user %s cmd /bin/sh -c %s\n", - file->cf_User, - line->cl_Shell - ); -@@ -89,7 +81,7 @@ - /* - * PARENT, FORK FAILED - */ -- log9("couldn't fork, user %s\n", file->cf_User); -+ log_err("couldn't fork, user %s\n", file->cf_User); - line->cl_Pid = 0; - remove(mailFile); - } else { -@@ -158,6 +150,7 @@ - if (mailFd < 0) { - return; - } -+ - if (fstat(mailFd, &sbuf) < 0 || - sbuf.st_uid != DaemonUid || - sbuf.st_nlink != 0 || -@@ -182,15 +175,6 @@ - exit(0); - - /* -- * create close-on-exec log descriptor in case exec fails -- */ -- -- dup2(2, 8); -- fcntl(8, F_SETFD, 1); -- -- fclose(stderr); -- -- /* - * run sendmail with mail file as standard input, only if - * mail file exists! - */ -@@ -200,7 +184,7 @@ - close(mailFd); - - execl(SENDMAIL, SENDMAIL, SENDMAIL_ARGS, NULL, NULL); -- logfd(8, "unable to exec %s %s, user %s, output to sink null", -+ log_err("unable to exec %s %s, user %s, output to sink null", - SENDMAIL, - SENDMAIL_ARGS, - file->cf_User -@@ -210,7 +194,7 @@ - /* - * PARENT, FORK FAILED - */ -- log9("unable to fork, user %s", file->cf_User); -+ log_err("unable to fork, user %s", file->cf_User); - line->cl_Pid = 0; - } else { - /* ---- ./main.c:1.1 Fri Jan 7 18:15:59 2000 -+++ ./main.c Sun Mar 19 15:03:36 2000 -@@ -15,14 +15,18 @@ - Prototype short DebugOpt; - Prototype short LogLevel; - Prototype short ForegroundOpt; --Prototype char *CDir; --Prototype int DaemonUid; -+Prototype short LoggerOpt; -+Prototype char *CDir; -+Prototype char *LogFile; -+Prototype uid_t DaemonUid; - - short DebugOpt; - short LogLevel = 8; --short ForegroundOpt; -+short ForegroundOpt = 0; -+short LoggerOpt; - char *CDir = CRONTABS; --int DaemonUid; -+char *LogFile = LOG_FILE; -+uid_t DaemonUid; - - int - main(int ac, char **av) -@@ -35,48 +39,49 @@ - - DaemonUid = getuid(); - -- for (i = 1; i < ac; ++i) { -- char *ptr = av[i]; -+ opterr = 0; /* disable getopt 'errors' message.*/ - -- if (*ptr == '-') { -- ptr += 2; -- -- switch(ptr[-1]) { -+ while ((i = getopt(ac,av,"d:l:L:fbSc:")) != EOF){ -+ -+ switch (i){ - case 'l': -- LogLevel = (*ptr) ? strtol(ptr, NULL, 0) : 1; -- continue; -+ LogLevel = atoi(optarg); -+ break; - case 'd': -- DebugOpt = (*ptr) ? strtol(ptr, NULL, 0) : 1; -+ DebugOpt = atoi(optarg); - LogLevel = 0; - /* fall through */ -+ break; - case 'f': - ForegroundOpt = 1; -- continue; -+ break; - case 'b': - ForegroundOpt = 0; -- continue; -+ break; -+ case 'S': /* select logging to syslog */ -+ LoggerOpt = 0; -+ break; -+ case 'L': /* select internal file logger */ -+ LoggerOpt = 1; -+ if (*optarg != 0) LogFile = optarg; -+ break; - case 'c': -- CDir = (*ptr) ? ptr : av[++i]; -- continue; -+ if (*optarg != 0) CDir = optarg; -+ break; - default: -+ /* -+ * parse error -+ */ -+ printf("dcron " VERSION "\n"); -+ printf("dcron -d [#] -l [#] -S -L logfile -f -b -c dir\n"); -+ printf("-d num\tdebug level\n-l num\tlog level (8 - default)\n-S\tlog to syslod (defualt)\n"); -+ printf("-L file\tlog to file\n-f\trun in fordeground\n"); -+ printf("-b\trun in background (default)\n-c dir\tworking dir\n"); -+ exit(1); - break; -- } -- } -- break; /* error */ -- } -- -- /* -- * check for parse error -- */ -- -- if (i != ac) { -- if (i > ac) -- puts("expected argument for option"); -- printf("dcron " VERSION "\n"); -- printf("dcron -d[#] -l[#] -f -b -c dir\n"); -- exit(1); -+ } - } -- -+ - /* - * change directory - */ -@@ -87,14 +92,15 @@ - } - - /* -- * close stdin and stdout (stderr normally redirected by caller). -- * close unused descriptors -+ * close stdin and stdout, stderr. -+ * close unused descriptors - don't need. - * optional detach from controlling terminal - */ - - fclose(stdin); - fclose(stdout); -- -+ fclose(stderr); -+ - i = open("/dev/null", O_RDWR); - if (i < 0) { - perror("open: /dev/null:"); -@@ -102,15 +108,14 @@ - } - dup2(i, 0); - dup2(i, 1); -+ dup2(i, 2); - -- for (i = 3; i < OPEN_MAX; ++i) { -- close(i); -- } -- - if (ForegroundOpt == 0) { - int fd; - int pid; -- -+ if (setsid() < 0) -+ perror("setsid"); -+ - if ((fd = open("/dev/tty", O_RDWR)) >= 0) { - ioctl(fd, TIOCNOTTY, 0); - close(fd); -@@ -125,13 +130,17 @@ - if (pid > 0) - exit(0); - } -- -+ -+ (void)startlogger(); /* need if syslog mode selected */ -+ (void)initsignals(); /* set some signal handlers */ -+ - /* - * main loop - synchronize to 1 second after the minute, minimum sleep - * of 1 second. - */ -+ -+ log(9,"%s " VERSION " dillon, started, log level %d\n", av[0], LogLevel); - -- log9("%s " VERSION " dillon, started\n", av[0]); - SynchronizeDir("."); - - { ---- ./subs.c:1.1 Fri Jan 7 18:15:59 2000 -+++ ./subs.c Sun Mar 19 15:03:36 2000 -@@ -10,43 +10,62 @@ - - Prototype void log(int level, const char *ctl, ...); - Prototype void log9(const char *ctl, ...); --Prototype void logfd(int fd, const char *ctl, ...); -+Prototype void log_err(const char *ctl, ...); - Prototype void fdprintf(int fd, const char *ctl, ...); --Prototype int ChangeUser(const char *user, short dochdir); --Prototype void vlog(int level, int fd, const char *ctl, va_list va); --Prototype int slog(char *buf, size_t sz, const char *ctl, va_list va, short useDate); -+Prototype void vlog(int level, int MLOG_LEVEL, const char *ctl, va_list va); -+Prototype int ChangeUser(const char *user, short dochdir); - Prototype char *xx_strdup(const char *); -+Prototype void startlogger(void); -+Prototype void initsignals(void); - -+/* -+ set log_level=9 and log messages -+*/ -+ - void - log9(const char *ctl, ...) - { - va_list va; - - va_start(va, ctl); -- vlog(9, 2, ctl, va); -+ vlog(9, LOG_WARNING, ctl, va); - va_end(va); - } - -+/* -+ normal logger call point. -+*/ -+ - void - log(int level, const char *ctl, ...) - { - va_list va; - - va_start(va, ctl); -- vlog(level, 2, ctl, va); -+ vlog(level, LOG_NOTICE, ctl, va); - va_end(va); - } - -+/* -+ Original: void -+ logfd(int fd, const char *ctl, ...) -+ Updated to: log_error (used by jobs.c) -+*/ -+ - void --logfd(int fd, const char *ctl, ...) -+log_err(const char *ctl, ...) - { - va_list va; - - va_start(va, ctl); -- vlog(9, fd, ctl, va); -+ vlog(20, LOG_ERR, ctl, va); - va_end(va); - } - -+/* -+ used by jobs.c (write to temp file..) -+*/ -+ - void - fdprintf(int fd, const char *ctl, ...) - { -@@ -60,32 +79,28 @@ - } - - void --vlog(int level, int fd, const char *ctl, va_list va) -+vlog(int level, int MLOG_LEVEL, const char *ctl, va_list va) - { - char buf[1024]; -- short n; -- static short useDate = 1; -+ int logfd; - - if (level >= LogLevel) { -- write(fd, buf, n = slog(buf, sizeof(buf), ctl, va, useDate)); -- useDate = (n && buf[n-1] == '\n'); -+ -+ vsnprintf(buf,sizeof(buf), ctl, va); -+ if (DebugOpt) fprintf(stderr,"%s",buf); -+ else -+ if (LoggerOpt == 0) syslog(MLOG_LEVEL, "%s",buf ); -+ else { -+ if ((logfd = open(LogFile,O_WRONLY|O_CREAT|O_APPEND,600)) >= 0){ -+ write(logfd, buf, strlen(buf)); -+ close(logfd); -+ } else -+ fprintf(stderr,"Can't open log file. Err: %s",strerror(errno)); -+ } - } - } - - int --slog(char *buf, size_t sz, const char *ctl, va_list va, short useDate) --{ -- time_t t = time(NULL); -- struct tm *tp = localtime(&t); -- -- buf[0] = 0; -- if (useDate) -- strftime(buf, 128, "%d-%b-%Y %H:%M ", tp); -- vsnprintf(buf + strlen(buf), sz - strlen(buf), ctl, va); -- return(strlen(buf)); --} -- --int - ChangeUser(const char *user, short dochdir) - { - struct passwd *pas; -@@ -141,3 +156,28 @@ - return(ptr); - } - -+ -+void -+startlogger(void){ -+int logfd; -+ -+ if (LoggerOpt == 0) -+ openlog("crond",LOG_CONS|LOG_PID,LOG_CRON); -+ -+ else { /* test logfile */ -+ if ((logfd = open(LogFile,O_WRONLY|O_CREAT|O_APPEND,600)) >= 0) -+ close(logfd); -+ else -+ printf("Failed to open log file '%s' reason: %s",LogFile,strerror(errno)); -+ } -+} -+ -+ -+void -+initsignals(void){ -+ -+ signal(SIGHUP,SIG_IGN); /* hmm.. but, if kill -HUP original -+ * version - his died. ;( -+ */ -+ -+} diff --git a/source/a/dcron/dcron-2.3.3.diff3 b/source/a/dcron/dcron-2.3.3.diff3 deleted file mode 100644 index 25c72fc96..000000000 --- a/source/a/dcron/dcron-2.3.3.diff3 +++ /dev/null @@ -1,11 +0,0 @@ ---- ./defs.h.orig Wed May 30 14:13:05 2001 -+++ ./defs.h Wed May 30 14:13:13 2001 -@@ -41,7 +41,7 @@ - #define OPEN_MAX 256 - #endif - #ifndef SENDMAIL --#define SENDMAIL "/usr/lib/sendmail" -+#define SENDMAIL "/usr/sbin/sendmail" - #endif - #ifndef SENDMAIL_ARGS - #define SENDMAIL_ARGS "-t", "-oem", "-i" diff --git a/source/a/dcron/dcron-2.3.3.lsm b/source/a/dcron/dcron-2.3.3.lsm deleted file mode 100644 index 5c161b50a..000000000 --- a/source/a/dcron/dcron-2.3.3.lsm +++ /dev/null @@ -1,17 +0,0 @@ -Begin3 -Title: DCron - yet another cron -Version: 2.3.3 -Entered-date: 17Feb98 -Description: A multi-user cron written from scratch by the author, - similar to vixie-cron but with significant differences. - Attention paid less to feature creep and more to usability - and reliability -Keywords: cron crontab dcron -Author: dillon@apollo.west.oic.com (Matthew Dillon) -Maintained-by: dillon@apollo.west.oic.com (Matthew Dillon) -Primary-site: sunsite.unc.edu /pub/Linux/system/daemons/cron -Alternate-site: -Original-site: -Platforms: -Copying-policy: GPL -End diff --git a/source/a/dcron/dcron-2.3.3.version.diff b/source/a/dcron/dcron-2.3.3.version.diff deleted file mode 100644 index 1b65a0c98..000000000 --- a/source/a/dcron/dcron-2.3.3.version.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./defs.h.orig Tue Apr 9 01:07:07 2002 -+++ ./defs.h Tue Apr 9 01:07:15 2002 -@@ -51,7 +51,7 @@ - #endif - - --#define VERSION "2.3.2" -+#define VERSION "2.3.3" - - typedef struct CronFile { - struct CronFile *cf_Next; diff --git a/source/a/dcron/dcron.SlackBuild b/source/a/dcron/dcron.SlackBuild index c9bb62ff3..f67f869ff 100755 --- a/source/a/dcron/dcron.SlackBuild +++ b/source/a/dcron/dcron.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -9,7 +9,7 @@ # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, @@ -20,57 +20,99 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.3.3 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-6} +VERSION=${VERSION:-$(echo dcron-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-dcron +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + rm -rf $PKG mkdir -p $TMP $PKG - -# Explode the package framework: -cd $PKG -explodepkg $CWD/_dcron.tar.gz - cd $TMP -rm -rf dcron-$VERSION -tar xzvf $CWD/dcron-$VERSION.tar.gz +rm -rf dcron +tar xvf $CWD/dcron-$VERSION.tar.?z* || exit 1 cd dcron-$VERSION -mkdir -p $PKG/usr/doc/dcron-$VERSION -cp -a CHANGES README dcron-$VERSION.lsm $PKG/usr/doc/dcron-2.3.3 -chown root:root $PKG/usr/doc/dcron-$VERSION/* -chmod 644 $PKG/usr/doc/dcron-$VERSION/* -zcat $CWD/dcron-$VERSION.diff.gz | patch -p1 -E --verbose --backup || exit -# Added signal handling/logging patch from TEMHOTA <temnota@kmv.ru>: -zcat $CWD/dcron-$VERSION.diff2.gz | patch -p1 -E --verbose --backup || exit -# Use /usr/sbin/sendmail, not /usr/lib/sendmail. Fixes cron working -# with Postfix. Suggested by Big Brother. -zcat $CWD/dcron-$VERSION.diff3.gz | patch -p1 -E --verbose --backup || exit +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Define TMPDIR as /var/spool/cron instead of /tmp +zcat $CWD/defs.h.TMPDIR.diff.gz | patch -p1 || exit 1 + # Fix problem where user creates /var/spool/cron/crontabs/<user>.new # using 'crontab -', exits with control-c, and then crontab refuses to -# overwrite the junk file: -zcat $CWD/dcron-$VERSION.crontab.diff4.gz | patch -p1 -E --verbose --backup || exit -# Dcron reports wrong version: -zcat $CWD/dcron-2.3.3.version.diff.gz | patch -p1 || exit -# Keep dcron from improperly forking in some circumstances. -# Thanks to Henrik Carlqvist for the patch. -zcat $CWD/dcron.fork.diff.gz | patch -p1 -make -strip crond crontab +# overwrite the junk file. It would be better if dcron would wipe +# the junk file in the event it were not closed correctly, but oh well. +zcat $CWD/patches/crontab.c.O_EXCL.diff.gz | patch -p1 || exit 1 + +# Get the directory names under /var/spool/ right in the manpages: +zcat $CWD/dcron.manpage.paths.diff.gz | patch -p1 --verbose || exit 1 + +CFLAGS+="$SLKCFLAGS" make || exit 1 +strip --strip-unneeded crond crontab + +mkdir -p $PKG/usr/{bin,sbin} cat crond > $PKG/usr/sbin/crond cat crontab > $PKG/usr/bin/crontab zcat $CWD/run-parts.gz > $PKG/usr/bin/run-parts +chmod 0755 $PKG/usr/sbin/crond +chmod 4711 $PKG/usr/bin/crontab +chmod 0755 $PKG/usr/bin/run-parts + +mkdir -p $PKG/usr/man/man{1,8} cat crontab.1 | gzip -9c > $PKG/usr/man/man1/crontab.1.gz cat crond.8 | gzip -9c > $PKG/usr/man/man8/crond.8.gz cat $CWD/run-parts.8.gz > $PKG/usr/man/man8/run-parts.8.gz +# Create some other stuff we need +mkdir -p $PKG/etc/cron.{hourly,daily,weekly,monthly} +mkdir -p $PKG/var/spool/cron/crontabs +mkdir -p $PKG/var/spool/cron/cronstamps +chmod 0751 $PKG/var/spool/cron +chmod 0750 $PKG/var/spool/cron/crontabs $PKG/var/spool/cron/cronstamps +zcat $CWD/crontab.root > $PKG/var/spool/cron/crontabs/root.new +chmod 0600 $PKG/var/spool/cron/crontabs/root.new +# dcron will whine about "unable to scan" this directory, so we'll create it +mkdir -p $PKG/etc/cron.d + +mkdir -p $PKG/usr/doc/dcron-$VERSION +cp -a \ + CHANGELOG README \ + extra \ + $PKG/usr/doc/dcron-$VERSION +chown -R root:root $PKG/usr/doc/dcron-$VERSION/* + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh -# Build the package: cd $PKG -makepkg -l y -c n $TMP/dcron-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/dcron-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/dcron/dcron.fork.diff b/source/a/dcron/dcron.fork.diff deleted file mode 100644 index b3aefc054..000000000 --- a/source/a/dcron/dcron.fork.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./job.c.orig 2005-09-11 16:36:43.000000000 -0700 -+++ ./job.c 2005-09-11 16:37:51.000000000 -0700 -@@ -51,7 +51,7 @@ - */ - - if (ChangeUser(file->cf_User, 1) < 0) -- return; -+ exit(0); - - if (DebugOpt) - log(5, "Child Running %s\n", line->cl_Shell); diff --git a/source/a/dcron/dcron.manpage.paths.diff b/source/a/dcron/dcron.manpage.paths.diff new file mode 100644 index 000000000..afd9c3d16 --- /dev/null +++ b/source/a/dcron/dcron.manpage.paths.diff @@ -0,0 +1,65 @@ +--- ./crond.8.orig 2010-01-18 09:29:25.000000000 -0600 ++++ ./crond.8 2010-02-11 17:22:36.000000000 -0600 +@@ -17,13 +17,13 @@ + .RE + .TP + .B -c dir +-directory of per-user crontabs (defaults to /var/spool/cron) ++directory of per-user crontabs (defaults to /var/spool/cron/crontabs) + .RS + .RE + .TP + .B -t dir + directory of timestamps for \@freq and FREQ=\&... jobs (defaults to +-/var/spool/cronstamps) ++/var/spool/cron/cronstamps) + .RS + .RE + .TP +@@ -172,7 +172,7 @@ + \f[B]crontab\f[] notifies \f[B]crond\f[] that a user's crontab file + has been modified (or created or deleted) through the + \[lq]cron.update\[rq] file, which resides in the per-user crontabs +-directory (usually /var/spool/cron). ++directory (usually /var/spool/cron/crontabs). + \f[B]crontab\f[] appends the filename of the modified crontab file + to \[lq]cron.update\[rq]; and \f[B]crond\f[] inspects this file to + determine when to reparse or otherwise update its internal list of +@@ -180,7 +180,7 @@ + .PP + Whenever a \[lq]cron.update\[rq] file is seen, \f[B]crond\f[] also + re-reads timestamp files from its timestamp directory (usually +-/var/spool/cronstamps). ++/var/spool/cron/cronstamps). + Normally these will just mirror \f[B]crond\f[]'s own internal + representations, but this mechanism could be used to manually + notify \f[B]crond\f[] that you've externally updated the +@@ -210,7 +210,7 @@ + crontab to /etc/cron.d/foo. + .PP + The superuser has a per-user crontab along with other users. +-It usually resides at /var/spool/cron/root. ++It usually resides at /var/spool/cron/crontabs/root. + .PP + Users can only have a crontab if they have an entry in /etc/passwd; + however they do not need to have login shell privileges. +--- ./crontab.1.orig 2010-01-18 09:29:25.000000000 -0600 ++++ ./crontab.1 2010-02-11 17:23:13.000000000 -0600 +@@ -45,7 +45,7 @@ + different user and/or crontab directory. + .PP + The superuser also has his or her own per-user crontab, saved as +-/var/spool/cron/root. ++/var/spool/cron/crontabs/root. + .PP + Unlike other cron daemons, this crond/crontab package doesn't try + to do everything under the sun. +@@ -117,7 +117,7 @@ + The formats \@hourly, \@daily, \@weekly, \@monthly, and \@yearly + need to update timestamp files when their jobs have been run. + The timestamp files are saved as +-/var/spool/cronstamps/user.jobname. ++/var/spool/cron/cronstamps/user.jobname. + So for all of these formats, the cron command needs a jobname, + given by prefixing the command with \f[B]ID=jobname\f[]. + (This syntax was chosen to maximize the chance that our crontab diff --git a/source/a/dcron/dcron.tmpdir.diff b/source/a/dcron/dcron.tmpdir.diff deleted file mode 100644 index 3946fedeb..000000000 --- a/source/a/dcron/dcron.tmpdir.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- defs.h.orig Mon May 2 10:27:40 1994 -+++ defs.h Sun Apr 4 22:09:00 1999 -@@ -29,7 +29,7 @@ - #define CRONTABS "/var/spool/cron/crontabs" - #endif - #ifndef TMPDIR --#define TMPDIR "/tmp" -+#define TMPDIR "/var/spool/cron" - #endif - #ifndef OPEN_MAX - #define OPEN_MAX 256 diff --git a/source/a/dcron/defs.h.TMPDIR.diff b/source/a/dcron/defs.h.TMPDIR.diff new file mode 100644 index 000000000..6263843b2 --- /dev/null +++ b/source/a/dcron/defs.h.TMPDIR.diff @@ -0,0 +1,11 @@ +--- ./defs.h.orig 2010-01-15 20:17:04.000000000 -0600 ++++ ./defs.h 2010-02-11 16:39:33.000000000 -0600 +@@ -73,7 +73,7 @@ + #define CRONUPDATE "cron.update" + #endif + #ifndef TMPDIR +-#define TMPDIR "/tmp" ++#define TMPDIR "/var/spool/cron" + #endif + + #ifndef SENDMAIL diff --git a/source/a/dcron/doinst.sh b/source/a/dcron/doinst.sh new file mode 100644 index 000000000..ce8dc7f3b --- /dev/null +++ b/source/a/dcron/doinst.sh @@ -0,0 +1,5 @@ +if [ ! -r var/spool/cron/crontabs/root ]; then + mv var/spool/cron/crontabs/root.new var/spool/cron/crontabs/root +else + rm -f var/spool/cron/crontabs/root.new +fi diff --git a/source/a/dcron/run-parts b/source/a/dcron/run-parts index dd6b59b3e..247d8c6e1 100644 --- a/source/a/dcron/run-parts +++ b/source/a/dcron/run-parts @@ -29,7 +29,7 @@ for SCRIPT in $1/* ; do # Determine if this file should be skipped by suffix: SKIP=false for SUFFIX in $IGNORE_SUFFIXES ; do - if [ ! "`basename $SCRIPT $SUFFIX`" = "`basename $SCRIPT`" ]; then + if [ ! "$(basename $SCRIPT $SUFFIX)" = "$(basename $SCRIPT)" ]; then SKIP=true break fi diff --git a/source/a/device-mapper/64-device-mapper.rules b/source/a/device-mapper/64-device-mapper.rules deleted file mode 100644 index 7e9a235db..000000000 --- a/source/a/device-mapper/64-device-mapper.rules +++ /dev/null @@ -1,37 +0,0 @@ -# device mapper links hook into "change" events, when the dm table -# becomes available; some table-types must be ignored - -KERNEL=="device-mapper", NAME="mapper/control" - -KERNEL!="dm-*", GOTO="device_mapper_end" -ACTION!="add|change", GOTO="device_mapper_end" - -# lookup device name -# use dmsetup, until devmap_name is provided by sys-fs/device-mapper -PROGRAM=="/sbin/dmsetup -j %M -m %m --noopencount --noheadings -c -o name info", - ENV{DM_NAME}="%c" - -# do not do anything if dmsetup does not provide a name -ENV{DM_NAME}=="", NAME="", OPTIONS="ignore_device" - -# ignore luks crypt devices while not fully up -ENV{DM_NAME}=="temporary-cryptsetup-*", NAME="", OPTIONS="ignore_device" - -# use queried name -ENV{DM_NAME}=="?*", NAME="mapper/$env{DM_NAME}" - -SYMLINK+="disk/by-id/dm-name-$env{DM_NAME}" -SYMLINK+="disk/by-name/$env{DM_NAME}" - -PROGRAM!="/sbin/dmsetup status -j %M -m %m", GOTO="device_mapper_end" -ENV{DM_TYPE}="%c{3}" - -ENV{DM_TYPE}=="|*error*", GOTO="device_mapper_end" - -IMPORT{program}="vol_id --export $tempnode" -OPTIONS="link_priority=50" -ENV{DM_TYPE}=="*snapshot-origin*", OPTIONS="link_priority=60" -ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" -ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" - -LABEL="device_mapper_end" diff --git a/source/a/device-mapper/device-mapper.SlackBuild b/source/a/device-mapper/device-mapper.SlackBuild deleted file mode 100755 index d770deed7..000000000 --- a/source/a/device-mapper/device-mapper.SlackBuild +++ /dev/null @@ -1,115 +0,0 @@ -#!/bin/sh - -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=1.02.28 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-device-mapper - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -fi - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP -rm -rf device-mapper.$VERSION -tar xvf $CWD/device-mapper.$VERSION.tar.bz2 || exit 1 -cd device-mapper.$VERSION - -chown -R root.root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -CFLAGS="$SLKCFLAGS" \ -./configure \ - --libdir=/lib${LIBDIRSUFFIX} \ - --mandir=/usr/man \ - --enable-static_link \ - --enable-pkgconfig \ - --enable-dmeventd \ - --disable-selinux \ - --with-device-uid=0 \ - --with-device-gid=6 \ - --with-device-mode=0660 \ - --build=$ARCH-slackware-linux - # I tried adding --enable-compat but that failed to compile - -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 - -# On x86_64 the pkgconfig files are installed to the wrong directory, but -# the .pc content is correct, so we just move them over: -if [ ! -d $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig ]; then - mkdir -p $PKG/usr/lib${LIBDIRSUFFIX} - mv $PKG/usr/lib/pkgconfig $PKG/usr/lib${LIBDIRSUFFIX}/ - rmdir $PKG/usr/lib || exit 1 -fi - -mkdir -p $PKG/lib/udev/rules.d -cat $CWD/64-device-mapper.rules > $PKG/lib/udev/rules.d/64-device-mapper.rules - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - -mkdir -p $PKG/usr/doc/device-mapper.$VERSION -cp -a \ - COPYING* INSTALL INTRO README* VERSION WHATS_NEW \ - $PKG/usr/doc/device-mapper.$VERSION - -# Compress and if needed symlink the man pages: -if [ -d $PKG/usr/man ]; then - ( cd $PKG/usr/man - for manpagedir in $(find . -type d -name "man*") ; do - ( cd $manpagedir - for eachpage in $( find . -type l -maxdepth 1) ; do - ln -s $( readlink $eachpage ).gz $eachpage.gz - rm $eachpage - done - gzip -9 *.? - ) - done - ) -fi - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -makepkg -l y -c n $TMP/device-mapper-$VERSION-$ARCH-$BUILD.txz - diff --git a/source/a/device-mapper/slack-desc b/source/a/device-mapper/slack-desc deleted file mode 100644 index 2708a39fb..000000000 --- a/source/a/device-mapper/slack-desc +++ /dev/null @@ -1,20 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -device-mapper: device-mapper (device-mapper for logical volume management) -device-mapper: -device-mapper: The goal of device-mapper is to support volume management. The -device-mapper: driver enables the definition of new block devices composed of -device-mapper: ranges of sectors of existing devices. This can be used to define -device-mapper: disk partitions or logical volumes. -device-mapper: -device-mapper: device-mapper is required by LVM2, the Logical Volume Manager. -device-mapper: -device-mapper: -device-mapper: - diff --git a/source/a/e2fsprogs/e2fsprogs.SlackBuild b/source/a/e2fsprogs/e2fsprogs.SlackBuild index c57cea4f3..c79c29eb7 100755 --- a/source/a/e2fsprogs/e2fsprogs.SlackBuild +++ b/source/a/e2fsprogs/e2fsprogs.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-1.41.8} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo e2fsprogs*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -34,6 +44,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -53,11 +66,7 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Disable --uuidd builds the same functionality into libuuid.*. -# It's better that way. -# Keep the included libblkid and libuuid for now, but we'll be using the -# system-wide one from util-linux-ng sooner or later... -# fsck.* will also be moving to u-l-ng +# Disable libblkid and libuuid, as we'll be using the ones in u-l-ng CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix= \ @@ -69,8 +78,8 @@ CFLAGS="$SLKCFLAGS" \ --infodir=/usr/info \ --docdir=/usr/doc/e2fsprogs-$VERSION \ --enable-elf-shlibs \ - --enable-libblkid \ - --enable-libuuid \ + --disable-libblkid \ + --disable-libuuid \ --disable-uuidd \ --build=$ARCH-slackware-linux @@ -99,6 +108,7 @@ mv $PKG/lib${LIBDIRSUFFIX}/pkgconfig $PKG/lib${LIBDIRSUFFIX}/*.so \ ln -sf /lib${LIBDIRSUFFIX}/$(readlink $i) $i ; done ) +# findfs is intentionally left out here - we use the one in util-linux-ng ( cd $PKG/sbin rm -f \ mkfs.ext2 mkfs.ext3 mkfs.ext4 mkfs.ext4dev \ @@ -108,7 +118,6 @@ mv $PKG/lib${LIBDIRSUFFIX}/pkgconfig $PKG/lib${LIBDIRSUFFIX}/*.so \ ln -sf mke2fs mkfs.ext4 ln -sf mke2fs mkfs.ext4dev ln -sf tune2fs e2label - ln -sf tune2fs findfs cat << EOF > fsck.ext2 #!/bin/sh exec /sbin/e2fsck -C 0 \$* diff --git a/source/a/eject/eject.SlackBuild b/source/a/eject/eject.SlackBuild index 56d1e79fc..c637ef553 100755 --- a/source/a/eject/eject.SlackBuild +++ b/source/a/eject/eject.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,9 +23,17 @@ PKGNAM=eject VERSION=${VERSION:-2.1.5} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} - +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -39,6 +47,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi cd $TMP @@ -46,6 +56,9 @@ rm -rf ${PKGNAM} tar xjvf $CWD/${PKGNAM}-$VERSION.tar.bz2 cd ${PKGNAM} +# Patch a problem with spaces in the pathname: +zcat $CWD/eject.spaces.diff.gz | patch -p0 --verbose || exit 1 + # Make sure ownerships and permissions are sane: chown -R root:root . find . \ diff --git a/source/a/eject/eject.spaces.diff b/source/a/eject/eject.spaces.diff new file mode 100644 index 000000000..2935b24bb --- /dev/null +++ b/source/a/eject/eject.spaces.diff @@ -0,0 +1,51 @@ +--- eject.c 15 Jul 2006 23:28:28 -0000 1.10 ++++ eject.c 2007-02-14 13:57:52.000000000 +0100 +@@ -379,6 +379,30 @@ static int FileExists(const char *name, + + + /* ++ * Linux mangles spaces in mount points by changing them to an octal string ++ * of '\040'. So lets scan the mount point and fix it up by replacing all ++ * occurrences off '\0##' with the ASCII value of 0##. Requires a writable ++ * string as input as we mangle in place. Some of this was taken from the ++ * util-linux package. ++ */ ++#define octalify(a) ((a) & 7) ++#define tooctal(s) (64*octalify(s[1]) + 8*octalify(s[2]) + octalify(s[3])) ++#define isoctal(a) (((a) & ~7) == '0') ++static char *DeMangleMount(char *s) ++{ ++ char *tmp = s; ++ while ((tmp = strchr(tmp, '\\')) != NULL) { ++ if (tmp[1] == '0' && isoctal(tmp[2]) && isoctal(tmp[3])) { ++ tmp[0] = tooctal(tmp); ++ memmove(tmp+1, tmp+4, strlen(tmp)-3); ++ } ++ ++tmp; ++ } ++ return s; ++} ++ ++ ++/* + * Given name, such as foo, see if any of the following exist: + * + * foo (if foo starts with '.' or '/') +@@ -890,6 +914,8 @@ static int MountedDevice(const char *nam + if (rc >= 2) { + int mtabmaj, mtabmin; + GetMajorMinor(s1, &mtabmaj, &mtabmin); ++ DeMangleMount(s1); ++ DeMangleMount(s2); + if (((strcmp(s1, name) == 0) || (strcmp(s2, name) == 0)) || + ((maj != -1) && (maj == mtabmaj) && (min == mtabmin))) { + FCLOSE(fp); +@@ -935,6 +961,8 @@ static int MountableDevice(const char *n + + while (fgets(line, sizeof(line), fp) != 0) { + rc = sscanf(line, "%1023s %1023s", s1, s2); ++ DeMangleMount(s1); ++ DeMangleMount(s2); + if (rc >= 2 && s1[0] != '#' && strcmp(s2, name) == 0) { + FCLOSE(fp); + *deviceName = strdup(s1); diff --git a/source/a/elvis/elvis.SlackBuild b/source/a/elvis/elvis.SlackBuild index 3bb83ba70..14f3cc926 100755 --- a/source/a/elvis/elvis.SlackBuild +++ b/source/a/elvis/elvis.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=2.2_0 -ARCH=${ARCH:-x86_64} BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-elvis @@ -34,6 +43,11 @@ cd $TMP rm -rf elvis-$VERSION tar xjvf $CWD/elvis-$VERSION.tar.bz2 cd elvis-$VERSION + +# Fix redefined getline() with glibc > 2.9 by changing the +# local function to elv_getline(): +zcat $CWD/elvis.ref.c.getline.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . # Time for a kludge (i.e. don't suggest this kind of thing be # done as a rule... I don't know why I'm crazy today). diff --git a/source/a/elvis/elvis.ref.c.getline.diff b/source/a/elvis/elvis.ref.c.getline.diff new file mode 100644 index 000000000..957c2d231 --- /dev/null +++ b/source/a/elvis/elvis.ref.c.getline.diff @@ -0,0 +1,47 @@ +--- ./ref.c.orig 2003-10-20 21:32:25.000000000 -0500 ++++ ./ref.c 2010-01-27 12:27:06.000000000 -0600 +@@ -42,7 +42,7 @@ + + #if USE_PROTOTYPES + static void usage(char *argv0); +-static char *getline(FILE *fp); ++static char *elv_getline(FILE *fp); + static void store(char *line, char **list); + static LINECLS classify(char *line, LINECLS prev); + static void lookup(TAG *tag); +@@ -171,7 +171,7 @@ + /* This function reads a single line, and replaces the terminating newline with + * a '\0' byte. The string will be in a static buffer. Returns NULL at EOF. + */ +-static char *getline(fp) ++static char *elv_getline(fp) + FILE *fp; + { + int ch; +@@ -348,7 +348,7 @@ + } + + /* for each line... */ +- for (lnum = 1, lc = LC_COMPLETE; (line = getline(fp)) != NULL; lnum++) ++ for (lnum = 1, lc = LC_COMPLETE; (line = elv_getline(fp)) != NULL; lnum++) + { + /* is this the tag definition? */ + if (taglnum > 0 ? taglnum == lnum : !strncmp(tagline, line, len)) +@@ -377,7 +377,7 @@ + { + if (strchr(line, '(') != NULL) + { +- while ((line = getline(fp)) != NULL ++ while ((line = elv_getline(fp)) != NULL + && *line + && ((*line != '#' && *line != '{') + || line[strlen(line) - 1] == '\\')) +@@ -387,7 +387,7 @@ + } + else if ((lc = classify(line, lc)) == LC_PARTIAL) + { +- while ((line = getline(fp)) != NULL ++ while ((line = elv_getline(fp)) != NULL + && (lc = classify(line, lc)) == LC_PARTIAL) + { + puts(line); diff --git a/source/a/etc/etc.SlackBuild b/source/a/etc/etc.SlackBuild index 6c708883b..d4508f2b5 100755 --- a/source/a/etc/etc.SlackBuild +++ b/source/a/etc/etc.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,18 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=13.0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=13.013 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} diff --git a/source/a/file/file.SlackBuild b/source/a/file/file.SlackBuild index aaa0ca41f..04c47856b 100755 --- a/source/a/file/file.SlackBuild +++ b/source/a/file/file.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,12 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=5.03 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo file-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,24 +44,21 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-file + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP rm -rf file-$VERSION tar xvf $CWD/file-$VERSION.tar.?z* || exit 1 cd file-$VERSION || exit 1 - -# Make the default data directory /etc/file like it has always been: -zcat $CWD/file.etc.file.diff.gz | patch -p1 --verbose || exit 1 -# This is needed after the patch above: -autoreconf || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -60,6 +66,11 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Make the default data directory /etc/file like it has always been: +zcat $CWD/file.etc.file.diff.gz | patch -p1 --verbose || exit 1 +# This is needed after the patch above: +autoreconf || exit 1 + # Don't spew warnings about using the flat text files zcat $CWD/file.quiet.diff.gz | patch -p1 -E --verbose || exit 1 # I don't know what this one does @@ -82,9 +93,16 @@ CFLAGS="$SLKCFLAGS" \ --disable-static \ --build=$ARCH-slackware-linux +# The generated $TMP/file-$VERSION/libtool is buggy. I don't know if this is supposed +# to work, but it certainly does, so... :-) +cat $(which libtool) > libtool + make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +# Seems --disable-static has been ignored lately: +rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libmagic.a + # Is file really this much of a processing bottleneck? Doubtful. # # NOTE: Benchmarked flat files vs. .mgc June 2009, found no measurable diff --git a/source/a/gawk/gawk.SlackBuild b/source/a/gawk/gawk.SlackBuild index e65e5aaf7..157f7ce9b 100755 --- a/source/a/gawk/gawk.SlackBuild +++ b/source/a/gawk/gawk.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,22 +20,34 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.1.6 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=gawk +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-gawk -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then +if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG @@ -43,57 +55,82 @@ mkdir -p $TMP $PKG cd $TMP rm -rf gawk-$VERSION -tar xjvf $CWD/gawk-$VERSION.tar.bz2 +tar xvf $CWD/gawk-$VERSION.tar.xz cd gawk-$VERSION chown -R root:root . + +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --mandir=/usr/man \ --infodir=/usr/info \ - $ARCH-slackware-linux + --build=$ARCH-slackware-linux -make -j3 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) + ( cd $PKG/usr/bin ln -sf gawk-$VERSION gawk ln -sf pgawk-$VERSION pgawk ) + mkdir -p $PKG/bin mv $PKG/usr/bin/gawk* $PKG/bin mv $PKG/usr/bin/awk $PKG/bin + ( cd $PKG/usr/bin ln -sf ../../bin/awk . ln -sf ../../bin/gawk . ln -sf ../../bin/gawk-$VERSION . ) + ( cd $PKG/usr/info rm dir gzip -9 * ) + ( cd $PKG/usr/man/man1 rm -f pgawk.1 gzip -9 * ln -sf gawk.1.gz awk.1.gz ln -sf gawk.1.gz pgawk.1.gz ) + mkdir -p $PKG/usr/doc/gawk-$VERSION cp -a \ - ABOUT-NLS AUTHORS COPYING FUTURES INSTALL LIMITATIONS NEWS POSIX.STD \ - PROBLEMS README README_d \ + ABOUT-NLS AUTHORS COPYING* FUTURES INSTALL LIMITATIONS NEWS POSIX.STD \ + PROBLEMS README* \ $PKG/usr/doc/gawk-$VERSION -find $PKG/usr/doc/gawk-$VERSION -type d -exec chmod 755 {} \; -find $PKG/usr/doc/gawk-$VERSION -type f -exec chmod 644 {} \; + +# We don't need to run the GPL: +chmod 644 $PKG/usr/doc/gawk-$VERSION/COPYING* + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc # Build the package: cd $PKG -makepkg -l y -c n $TMP/gawk-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/gawk-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/gettext/gettext-tools.SlackBuild b/source/a/gettext/gettext-tools.SlackBuild index 945032c69..134066195 100755 --- a/source/a/gettext/gettext-tools.SlackBuild +++ b/source/a/gettext/gettext-tools.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2008 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,8 +21,17 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=0.17 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -40,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/a/gettext/gettext.SlackBuild b/source/a/gettext/gettext.SlackBuild index bdc269c50..89de611ef 100755 --- a/source/a/gettext/gettext.SlackBuild +++ b/source/a/gettext/gettext.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,8 +21,17 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=0.17 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -40,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/a/gzip/gzip.SlackBuild b/source/a/gzip/gzip.SlackBuild index c2719ebd3..d5133fd5b 100755 --- a/source/a/gzip/gzip.SlackBuild +++ b/source/a/gzip/gzip.SlackBuild @@ -1,5 +1,6 @@ #!/bin/sh -# Copyright 2006-2009 Patrick J. Volkerding, Sebeka, MN, USA + +# Copyright 2006-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PKGNAM=gzip -VERSION=${VERSION:-1.3.12} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-1.4} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} @@ -36,6 +48,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG @@ -43,7 +57,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xjvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -68,7 +82,7 @@ CFLAGS="$SLKCFLAGS" \ --build=$ARCH-slackware-linux # Build and install: -make -j4 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 # The ncompress package already has this: @@ -76,8 +90,10 @@ rm -f $PKG/bin/uncompress # Strip binaries: ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) # Fix locations: @@ -138,9 +154,17 @@ cp -a \ AUTHORS COPYING INSTALL NEWS README README-alpha THANKS TODO \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $TMP/package-${PKGNAM} -makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.tgz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.tgz diff --git a/source/a/hdparm/hdparm.SlackBuild b/source/a/hdparm/hdparm.SlackBuild index 293b1cf87..fbb2a2f71 100755 --- a/source/a/hdparm/hdparm.SlackBuild +++ b/source/a/hdparm/hdparm.SlackBuild @@ -20,7 +20,7 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-9.3} +VERSION=${VERSION:-9.27} ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} diff --git a/source/a/inotify-tools/inotify-tools.SlackBuild b/source/a/inotify-tools/inotify-tools.SlackBuild index 82e807fce..c115b4e04 100755 --- a/source/a/inotify-tools/inotify-tools.SlackBuild +++ b/source/a/inotify-tools/inotify-tools.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PKGNAM=inotify-tools -VERSION=${VERSION:-3.13} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} @@ -40,11 +49,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -95,13 +107,20 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION} cp -a \ - AUTHORS COPYING ChangeLog INSTALL NEWS README \ + AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/${PKGNAM}-${VERSION} # Get rid of html api documentation: rm -rf $PKG/usr/doc/${PKGNAM}-${VERSION}/html +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install -#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG diff --git a/source/a/kbd/kbd.SlackBuild b/source/a/kbd/kbd.SlackBuild index 7ac0b142f..ddcd96703 100755 --- a/source/a/kbd/kbd.SlackBuild +++ b/source/a/kbd/kbd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PKGNAM=kbd -VERSION=1.15 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +VERSION=1.15.2 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:--j4} @@ -40,7 +49,7 @@ cd $TMP # Extract source: rm -rf $PKGNAM-$VERSION -tar xvf $CWD/sources/$PKGNAM-$VERSION.tar.bz2 +tar xvf $CWD/sources/$PKGNAM-$VERSION.tar.bz2 || exit 1 cd $PKGNAM-$VERSION # Make sure ownerships and permissions are sane: @@ -59,12 +68,10 @@ find . -perm 555 -exec chmod 755 {} \; # Apply patches: # These are taken from Fedora's SRPM: -zcat $CWD/sources/kbd-1.15-po.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/sources/kbd-1.15.2-po.patch.gz | patch -p1 --verbose || exit 1 zcat $CWD/sources/kbd-1.15-keycodes-man.patch | patch -p1 --verbose || exit 1 -zcat $CWD/sources/kbd-1.15-sparc.patch | patch -p1 --verbose || exit 1 zcat $CWD/sources/kbd-1.15-unicode_start.patch | patch -p1 --verbose || exit 1 zcat $CWD/sources/kbd-1.15-resizecon-x86_64.patch | patch -p1 --verbose || exit 1 -zcat $CWD/sources/kbd-1.15-quiet_doc.patch | patch -p1 --verbose || exit 1 # This is from Fedora's spec file: # 7-bit maps are obsolete; so are non-euro maps @@ -122,10 +129,18 @@ install -vpm755 $CWD/setconsolefont $PKG/usr/bin/ # Copy docs: mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - ChangeLog COPYING README doc/* \ + COPYING* README* doc/* \ $PKG/usr/doc/$PKGNAM-$VERSION rm -f $PKG/usr/doc/$PKGNAM-$VERSION/kbd.FAQ.sgml +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Additional keymaps: # This is the keymap for Speakup (http://linux-speakup.org) users: cat $CWD/sources/speakupmap.map.gz > $PKG/usr/share/kbd/keymaps/i386/qwerty/speakupmap.map.gz @@ -136,7 +151,9 @@ tar xvf $CWD/sources/speakup-jfw.tar.gz cat readme > $PKG/usr/share/kbd/keymaps/i386/qwerty/speakup-jfw.readme ) # Create the default run control script which will set the -# console font to the default: +# console font to the "default"... though this might not be +# the same state as if setfont were not used at all. +# For that reason, default the script to non-executable. mkdir -pm755 $PKG/etc/rc.d cat << EOF > $PKG/etc/rc.d/rc.font.new #!/bin/sh @@ -146,16 +163,38 @@ cat << EOF > $PKG/etc/rc.d/rc.font.new # setfont -v EOF -chmod 755 $PKG/etc/rc.d/rc.font.new +chmod 644 $PKG/etc/rc.d/rc.font.new # Create package post-install script: mkdir -p $PKG/install cat << EOF > $PKG/install/doinst.sh -#if [ -r etc/rc.d/rc.font ]; then -# rm -f etc/rc.d/rc.font.new -#else -# mv etc/rc.d/rc.font.new etc/rc.d/rc.font -#fi + +config() { + NEW="\$1" + OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r \$OLD ]; then + mv \$NEW \$OLD + elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then + # toss the redundant copy + rm \$NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +# Leave any new rc.font with the same permissions as the old one: +# This is a kludge, but it's because there's no --reference option +# on busybox's 'chmod': +if [ -e etc/rc.d/rc.font ]; then + if [ -x etc/rc.d/rc.font ]; then + chmod 755 etc/rc.d/rc.font.new + else + chmod 644 etc/rc.d/rc.font.new + fi +fi +# Then config() it: +config etc/rc.d/rc.font.new + EOF # Compress man pages: diff --git a/source/a/kbd/setconsolefont b/source/a/kbd/setconsolefont index d4cfb875a..fe56a34f6 100644 --- a/source/a/kbd/setconsolefont +++ b/source/a/kbd/setconsolefont @@ -5,6 +5,8 @@ # Run 'setfont' in a chroot. This makes setfont work # correctly in the installer. +# 2010-04-28, add LatKaCyrHeb-14.psfu.gz <volkerdi> + if [ "$TMP" = "" ]; then TMP=/var/log/setup/tmp fi @@ -78,6 +80,7 @@ screen font. You'll be able to try as many of these as you like." 21 65 12 \ "LatArCyrHeb-16+.psfu.gz" "" \ "LatArCyrHeb-16.psfu.gz" "" \ "LatArCyrHeb-19.psfu.gz" "" \ +"LatKaCyrHeb-14.psfu.gz" "" \ "Mik_8x16.gz" "" \ "UniCyrExt_8x16.psf.gz" "" \ "UniCyr_8x14.psf.gz" "" \ @@ -296,7 +299,8 @@ Cyr_a8x14.psfu.gz Cyr_a8x16.psfu.gz Cyr_a8x8.psfu.gz Goha-12.psfu.gz Goha-14.psfu.gz Goha-16.psfu.gz GohaClassic-12.psfu.gz GohaClassic-14.psfu.gz GohaClassic-16.psfu.gz Lat2-Terminus16.psfu.gz LatArCyrHeb-08.psfu.gz LatArCyrHeb-14.psfu.gz LatArCyrHeb-16+.psfu.gz LatArCyrHeb-16.psfu.gz -LatArCyrHeb-19.psfu.gz Mik_8x16.gz UniCyrExt_8x16.psf.gz UniCyr_8x14.psf.gz +LatArCyrHeb-19.psfu.gz LatKaCyrHeb-14.psfu.gz +Mik_8x16.gz UniCyrExt_8x16.psf.gz UniCyr_8x14.psf.gz UniCyr_8x16.psf.gz UniCyr_8x8.psf.gz alt-8x14.gz alt-8x16.gz alt-8x8.gz altc-8x16.gz aply16.psf.gz arm8.fnt.gz b.fnt.gz c.fnt.gz cp1250.psfu.gz cp850-8x14.psfu.gz cp850-8x16.psfu.gz cp850-8x8.psfu.gz cp857.08.gz cp857.14.gz diff --git a/source/a/kbd/sources/kbd-1.15-po.patch b/source/a/kbd/sources/kbd-1.15-po.patch deleted file mode 100644 index 0221f60c9..000000000 --- a/source/a/kbd/sources/kbd-1.15-po.patch +++ /dev/null @@ -1,31 +0,0 @@ -diff -up kbd-1.15/po/Makefile.in_old kbd-1.15/po/Makefile.in ---- kbd-1.15/po/Makefile.in_old 2008-10-23 21:03:59.000000000 +0200 -+++ kbd-1.15/po/Makefile.in 2008-12-09 15:35:58.000000000 +0100 -@@ -4,10 +4,10 @@ srcdir = @srcdir@ - - prefix = @prefix@ - datarootdir = @datarootdir@ --datadir = @datadir@ --localedir = $(DESTDIR)$(datadir)/locale --gnulocaledir = $(DESTDIR)$(datadir)/locale --gettextsrcdir = $(DESTDIR)$(datadir)/gettext/po -+datadir = $(DESTDIR)@datadir@ -+localedir = $(DESTDIR)@localedir@ -+gnulocaledir = $(DESTDIR)@localedir@ -+gettextsrcdir = $(datadir)/gettext/po - - FOREIGN = @FOREIGN@ - HAVE_XGETTEXT = @HAVE_XGETTEXT@ -@@ -36,10 +36,10 @@ INCLUDES = -I.. -I$(INTL) - COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS) - - # Enter here all .po files --POFILES = cs.po da.po de.po el.po es.po fr.po gr.po nl.po pl.po \ -+POFILES = cs.po da.po de.po el.po es.po fr.po nl.po pl.po \ - ro.po ru.po sv.po tr.po - # the same but with .gmo --GMOFILES = cs.gmo da.gmo de.gmo el.gmo es.gmo fr.gmo gr.gmo nl.gmo \ -+GMOFILES = cs.gmo da.gmo de.gmo el.gmo es.gmo fr.gmo nl.gmo \ - pl.gmo ro.gmo ru.gmo sv.gmo tr.gmo - - CATALOGS = $(GMOFILES) diff --git a/source/a/kbd/sources/kbd-1.15-quiet_doc.patch b/source/a/kbd/sources/kbd-1.15-quiet_doc.patch deleted file mode 100644 index eca867b85..000000000 --- a/source/a/kbd/sources/kbd-1.15-quiet_doc.patch +++ /dev/null @@ -1,34 +0,0 @@ -diff -up kbd-1.15/man/man1/loadkeys.1.in_old kbd-1.15/man/man1/loadkeys.1.in ---- kbd-1.15/man/man1/loadkeys.1.in_old 2008-10-23 21:03:59.000000000 +0200 -+++ kbd-1.15/man/man1/loadkeys.1.in 2009-03-05 13:11:08.000000000 +0100 -@@ -19,6 +19,8 @@ loadkeys \- load keyboard translation ta - ] [ - .I -m --mktable - ] [ -+.I -q --quiet -+] [ - .I -s --clearstrings - ] [ - .I -v --verbose -@@ -148,6 +150,10 @@ command (and does not modify the current - .B loadkeys - prints its version number and a short usage message to the programs - standard error output and exits. -+.TP -+.B \-q \-\-quiet -+.B loadkeys -+suppresses all normal output. - .SH WARNING - Note that anyone having read access to - .B /dev/console -diff -up kbd-1.15/src/loadkeys.c_old kbd-1.15/src/loadkeys.c ---- kbd-1.15/src/loadkeys.c_old 2008-10-23 21:03:59.000000000 +0200 -+++ kbd-1.15/src/loadkeys.c 2009-03-05 13:09:00.000000000 +0100 -@@ -1966,6 +1966,7 @@ usage(void) { - " -d --default load \"%s\"\n" - " -h --help display this help text\n" - " -m --mktable output a \"defkeymap.c\" to stdout\n" -+" -q --quiet suppress all normal output\n" - " -s --clearstrings clear kernel string table\n" - " -u --unicode implicit conversion to Unicode\n" - " -v --verbose report the changes\n"), PACKAGE_VERSION, DEFMAP); diff --git a/source/a/kbd/sources/kbd-1.15-sparc.patch b/source/a/kbd/sources/kbd-1.15-sparc.patch deleted file mode 100644 index a858a253a..000000000 --- a/source/a/kbd/sources/kbd-1.15-sparc.patch +++ /dev/null @@ -1,97 +0,0 @@ -diff -up kbd-1.15/man/man8/kbdrate.8_old kbd-1.15/man/man8/kbdrate.8 ---- kbd-1.15/man/man8/kbdrate.8_old 2008-12-10 14:20:33.000000000 +0100 -+++ kbd-1.15/man/man8/kbdrate.8 2008-12-10 14:41:10.000000000 +0100 -@@ -22,7 +22,7 @@ Using - without any options will reset the repeat rate to 10.9 characters per second (cps) - and the delay to 250 milliseconds (ms) for Intel- and M68K-based systems. - These are the IBM defaults. On SPARC-based systems it will reset the repeat rate --to 5 cps and the delay to 200 ms. -+to 20 cps and the delay to 200 ms. - - .SH OPTIONS - .TP -@@ -69,3 +69,5 @@ When these ioctls fail an ioport interfa - .I /etc/rc.local - .br - .I /dev/port -+.br -+.I /dev/kbd -diff -up kbd-1.15/src/kbdrate.c_old kbd-1.15/src/kbdrate.c ---- kbd-1.15/src/kbdrate.c_old 2008-12-10 14:00:25.000000000 +0100 -+++ kbd-1.15/src/kbdrate.c 2008-12-10 14:20:11.000000000 +0100 -@@ -77,7 +77,6 @@ beats rebuilding the kernel! - - #ifdef __sparc__ - #include <asm/param.h> --#include <asm/kbio.h> - #endif - - #ifndef KDKBDREP -@@ -109,11 +108,15 @@ static int valid_delays[] = { 250, 500, - - static int - KDKBDREP_ioctl_ok(double rate, int delay, int silent) { -+#if defined(KDKBDREP) && !defined(__sparc__) - /* - * This ioctl is defined in <linux/kd.h> but is not - * implemented anywhere - must be in some m68k patches. -+ * We cannot blindly try unimplemented ioctls on sparc64 - -+ * the 32<->64bit transition layer does not like it. - * Since 2.4.9 also on i386. -- */ -+ */ -+ - struct my_kbd_repeat kbdrep_s; - - /* don't change, just test */ -@@ -177,6 +180,9 @@ KDKBDREP_ioctl_ok(double rate, int delay - rate, kbdrep_s.delay ); - - return 1; /* success! */ -+#else /* no KDKBDREP or __sparc__ */ -+ return 0; -+#endif /* KDKBDREP */ - } - - static int -@@ -221,7 +227,7 @@ sigalrmhandler( int sig ) { - int - main( int argc, char **argv ) { - #ifdef __sparc__ -- double rate = 5.0; /* Default rate */ -+ double rate = 20.0; /* Default rate */ - int delay = 200; /* Default delay */ - #else - double rate = 10.9; /* Default rate */ -@@ -272,7 +278,9 @@ main( int argc, char **argv ) { - - - /* The ioport way */ -+ /* The ioport way - will crash on sparc */ - -+#ifndef __sparc__ - for (i = 0; i < RATE_COUNT; i++) - if (rate * 10 >= valid_rates[i]) { - value &= 0x60; -@@ -335,5 +343,7 @@ main( int argc, char **argv ) { - valid_rates[value & 0x1f] / 10.0, - valid_delays[ (value & 0x60) >> 5 ] ); - -+#endif -+ - return 0; - } -diff -up kbd-1.15/src/setleds.c_old kbd-1.15/src/setleds.c ---- kbd-1.15/src/setleds.c_old 2008-12-10 14:00:02.000000000 +0100 -+++ kbd-1.15/src/setleds.c 2008-12-10 14:00:16.000000000 +0100 -@@ -14,10 +14,6 @@ - #include "nls.h" - #include "version.h" - --#ifdef __sparc__ --#include <asm/kbio.h> --#endif -- - static void - usage(void) - { diff --git a/source/a/kbd/sources/kbd-1.15.2-po.patch b/source/a/kbd/sources/kbd-1.15.2-po.patch new file mode 100644 index 000000000..a32a793f4 --- /dev/null +++ b/source/a/kbd/sources/kbd-1.15.2-po.patch @@ -0,0 +1,14 @@ +--- ./po/Makefile.in.in.orig 2010-04-10 16:34:12.000000000 -0500 ++++ ./po/Makefile.in.in 2010-04-29 00:19:10.000000000 -0500 +@@ -22,8 +22,9 @@ + + prefix = @prefix@ + exec_prefix = @exec_prefix@ +-datadir = @datadir@ +-localedir = $(datadir)/locale ++datadir = @datadir@ ++localedir = @localedir@ ++gnulocaledir = @localedir@ + gettextsrcdir = $(datadir)/gettext/po + + INSTALL = @INSTALL@ diff --git a/source/d/git/git-1.6.4.tar.sign b/source/a/kbd/sources/kbd-1.15.2.tar.bz2.sign index 2230cf7d7..39f3c0228 100644 --- a/source/d/git/git-1.6.4.tar.sign +++ b/source/a/kbd/sources/kbd-1.15.2.tar.bz2.sign @@ -2,7 +2,7 @@ Version: GnuPG v1.4.9 (GNU/Linux) Comment: See http://www.kernel.org/signature.html for info -iD8DBQBKcAouyGugalF9Dw4RAqFKAJ9oLB8/l1VkfFlEjcAFo4Y5SUcq8gCeIbNI -tWNG/MK+CTVBaz3cdiWCeJ8= -=E/iU +iD8DBQBLwPHZyGugalF9Dw4RAhiyAJ9DdLbizzsoJi87OjQ8VzyNsRnr2QCeJ9zg +MOKY0UbkCZyUALLyzxF2bKE= +=Ou46 -----END PGP SIGNATURE----- diff --git a/source/a/less/less.SlackBuild b/source/a/less/less.SlackBuild index 643359571..49a15eed4 100755 --- a/source/a/less/less.SlackBuild +++ b/source/a/less/less.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,19 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-less +VERSION=${VERSION:-$(echo less-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} -VERSION=${VERSION:-418} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then +if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" @@ -45,14 +48,20 @@ elif [ "$ARCH" = "arm" ]; then elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-less rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf less-$VERSION -tar xvf $CWD/less-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/less-$VERSION.tar.?z* || exit 1 cd less-$VERSION zcat $CWD/less.sysconfdir.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/a/less/lesspipe.sh b/source/a/less/lesspipe.sh index 2d660522d..7850a488f 100644 --- a/source/a/less/lesspipe.sh +++ b/source/a/less/lesspipe.sh @@ -45,6 +45,7 @@ lesspipe() { *.1.gz|*.2.gz|*.3.gz|*.4.gz|*.5.gz|*.6.gz|*.7.gz|*.8.gz|*.9.gz|*.n.gz|*.man.gz) # compressed *roff src? if gzip -dc "$1" | file - | grep roff 1> /dev/null ; then gzip -dc "$1" | nroff -S -mandoc - + else gzip -dc "$1" 2>/dev/null fi ;; *.1.bz2|*.2.bz2|*.3.bz2|*.4.bz2|*.5.bz2|*.6.bz2|*.7.bz2|*.8.bz2|*.9.bz2|*.n.bz2|*.man.bz2) # compressed *roff src? if bzip2 -dc "$1" | file - | grep roff 1> /dev/null ; then diff --git a/source/a/lilo/lilo.SlackBuild b/source/a/lilo/lilo.SlackBuild index 197f33843..e33c8778b 100755 --- a/source/a/lilo/lilo.SlackBuild +++ b/source/a/lilo/lilo.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,17 @@ VERSION=${VERSION:-22.8} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-14} +BUILD=${BUILD:-15} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -38,6 +47,9 @@ tar xvf $CWD/lilo-$VERSION.src.tar.gz || exit 1 cd lilo-$VERSION chown -R root:root . +# This is needed for LVM+udev+devtmpfs +zcat $CWD/lilo.use_major_minor_instead_lvm_name.diff.gz | patch -p1 --verbose || exit 1 + make || exit 1 make install ROOT=$PKG diff --git a/source/a/lilo/lilo.use_major_minor_instead_lvm_name.diff b/source/a/lilo/lilo.use_major_minor_instead_lvm_name.diff new file mode 100644 index 000000000..860347ebb --- /dev/null +++ b/source/a/lilo/lilo.use_major_minor_instead_lvm_name.diff @@ -0,0 +1,47 @@ +--- lilo-22.8/geometry.c 2006-12-17 01:46:17.000000000 -0200 ++++ lilo-22.8-new/geometry.c 2009-12-18 02:09:54.000000000 -0200 +@@ -903,24 +903,17 @@ + void *next = NULL; + char dmdev[PATH_MAX+1]; + char buf[PATH_MAX+1]; +- char *slash; + int result; + + dev_open(&dev, device, -1); + strncpy(dmdev, dev.name, PATH_MAX); + dmdev[PATH_MAX] = 0; ++ + do { + memset(buf, 0, PATH_MAX + 1); + if ((result = readlink(dmdev, buf, PATH_MAX)) < 0 && errno != EINVAL) + die("device-mapper: readlink(\"%s\") failed with: %s",buf, + strerror(errno)); +- if (result >= 0) { +- if (buf[0] != '/' && (slash = strrchr(dmdev, '/')) != NULL) +- slash++; +- else +- slash = dmdev; +- strncpy(slash, buf, PATH_MAX - (slash-dmdev)); +- } + if (realpath(dmdev, buf) == NULL) + die("device-mapper: realpath(\"%s\") failed with: %s",dmdev, + strerror(errno)); +@@ -930,13 +923,11 @@ + + if (!(dmt = dm_task_create(DM_DEVICE_TABLE))) + die("device-mapper: dm_task_create(DM_DEVICE_TABLE) failed"); +- slash = strrchr(dmdev, '/'); +- if (slash) +- slash++; +- else +- slash = dmdev; +- if (!dm_task_set_name(dmt, slash)) +- die("device-mapper: dm_task_set_name(\"%s\") failed",dmdev); ++ // Using device name is flawed. Better to use device major and minor ++ if (!dm_task_set_major(dmt, MAJOR(device))) ++ die("device-mapper: dm_task_set_major(DM_DEVICE_TABLE) failed"); ++ if (!dm_task_set_minor(dmt, MINOR(device))) ++ die("device-mapper: dm_task_set_minor(DM_DEVICE_TABLE) failed"); + if (!dm_task_run(dmt)) + die("device-mapper: dm_task_run(DM_DEVICE_TABLE) failed"); + diff --git a/source/a/lilo/slack.bmp b/source/a/lilo/slack.bmp Binary files differindex 3dd5652a8..229299163 100644 --- a/source/a/lilo/slack.bmp +++ b/source/a/lilo/slack.bmp diff --git a/source/a/logrotate/doinst.sh b/source/a/logrotate/doinst.sh new file mode 100644 index 000000000..ea006ffac --- /dev/null +++ b/source/a/logrotate/doinst.sh @@ -0,0 +1,13 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} +config etc/logrotate.conf.new + diff --git a/source/a/logrotate/logrotate.SlackBuild b/source/a/logrotate/logrotate.SlackBuild index 6b6284b7c..76cc34abe 100755 --- a/source/a/logrotate/logrotate.SlackBuild +++ b/source/a/logrotate/logrotate.SlackBuild @@ -20,25 +20,42 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=${VERSION:-3.7.4} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-3.7.8} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-logrotate +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + rm -rf $PKG mkdir -p $TMP $PKG - -# Explode the package framework: -cd $PKG -explodepkg $CWD/_logrotate.tar.gz - cd $TMP rm -rf logrotate-$VERSION -tar xzvf $CWD/logrotate-$VERSION.tar.gz +tar xvf $CWD/logrotate-$VERSION.tar.?z* || exit 1 cd logrotate-$VERSION chown -R root:root . find . \ @@ -47,25 +64,43 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -zcat $CWD/logrotate.slackware.diff.gz | patch -p1 +# Fixup a few things: +zcat $CWD/logrotate.slackware.diff.gz | patch -p1 || exit 1 + make clean -make || exit 1 +make EXTRA_CFLAGS="$SLKCFLAGS" || exit 1 strip logrotate + +mkdir -p $PKG/usr/sbin cat logrotate > $PKG/usr/sbin/logrotate +chmod 0755 $PKG/usr/sbin/logrotate + +mkdir -p $PKG/usr/man/man8 cat logrotate.8 | gzip -9c > $PKG/usr/man/man8/logrotate.8.gz + +# Create the logrotate.d directory and install the config file +mkdir -p $PKG/etc/logrotate.d +zcat $CWD/logrotate.conf.gz > $PKG/etc/logrotate.conf.new + +# Make logrotate run from cron every day +mkdir -p $PKG/etc/cron.daily +zcat $CWD/logrotate.cron.gz > $PKG/etc/cron.daily/logrotate +chmod 0755 $PKG/etc/cron.daily/logrotate + +# Create the state directory +mkdir -p $PKG/var/lib/logrotate + mkdir -p $PKG/usr/doc/logrotate-$VERSION cp -a \ CHANGES COPYING READM* \ - $PKG/usr/doc/logrotate-$VERSION + $PKG/usr/doc/logrotate-$VERSION + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -# Build the package: +mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + cd $PKG -makepkg -l y -c n $TMP/logrotate-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/logrotate-$VERSION-$ARCH-$BUILD.txz -# Clean up the extra stuff: -if [ "$1" = "--cleanup" ]; then - rm -rf $TMP/logrotate-$VERSION - rm -rf $PKG -fi diff --git a/source/a/logrotate/logrotate.conf b/source/a/logrotate/logrotate.conf new file mode 100644 index 000000000..27b03e134 --- /dev/null +++ b/source/a/logrotate/logrotate.conf @@ -0,0 +1,50 @@ +# /etc/logrotate.conf +# +# logrotate is designed to ease administration of systems that generate large +# numbers of log files. It allows automatic rotation, compression, removal, and +# mailing of log files. Each log file may be handled daily, weekly, monthly, or +# when it grows too large. +# +# logrotate is normally run daily from root's crontab. +# +# For more details, see "man logrotate". + +# rotate log files weekly: +weekly + +# keep 4 weeks worth of backlogs: +rotate 4 + +# create new (empty) log files after rotating old ones: +create + +# uncomment if you want to use the date as a suffix of the rotated file +#dateext + +# uncomment this if you want your log files compressed: +#compress + +# some packages install log rotation information in this directory: +include /etc/logrotate.d + +# Rotate /var/log/wtmp: +/var/log/wtmp { + monthly + create 0664 root utmp + minsize 1M + rotate 1 +} + +# Rotate /var/log/btmp: +/var/log/btmp { + monthly + create 0600 root root + rotate 1 +} + +# Note that /var/log/lastlog is not rotated. This is intentional, and it should +# not be. The lastlog file is a database, and is also a sparse file that takes +# up much less space on the drive than it appears. + +# system-specific logs may be also be configured below: + diff --git a/source/a/logrotate/logrotate.cron b/source/a/logrotate/logrotate.cron new file mode 100644 index 000000000..f91b3adda --- /dev/null +++ b/source/a/logrotate/logrotate.cron @@ -0,0 +1,3 @@ +#!/bin/sh +/usr/sbin/logrotate /etc/logrotate.conf +[ $? != 0 ] && /usr/bin/logger -t logrotate "ALERT - exited abnormally." diff --git a/source/a/logrotate/logrotate.slackware.diff b/source/a/logrotate/logrotate.slackware.diff index 77b8aad6b..e9126cee3 100644 --- a/source/a/logrotate/logrotate.slackware.diff +++ b/source/a/logrotate/logrotate.slackware.diff @@ -1,44 +1,55 @@ -diff -u -r --new-file logrotate-3.7.4.orig/config.c logrotate-3.7.4/config.c ---- logrotate-3.7.4.orig/config.c 2006-07-24 07:08:04.000000000 -0500 -+++ logrotate-3.7.4/config.c 2006-09-21 01:07:50.000000000 -0500 -@@ -29,7 +29,7 @@ +diff -Nur logrotate-3.7.8.orig/Makefile logrotate-3.7.8/Makefile +--- logrotate-3.7.8.orig/Makefile 2008-05-19 05:25:54.000000000 -0500 ++++ logrotate-3.7.8/Makefile 2009-05-09 23:25:12.060201375 -0500 +@@ -1,7 +1,7 @@ + VERSION = $(shell awk '/Version:/ { print $$2 }' logrotate.spec) + OS_NAME = $(shell uname -s) + LFS = $(shell echo `getconf LFS_CFLAGS 2>/dev/null`) +-CFLAGS = -Wall -D_GNU_SOURCE -D$(OS_NAME) -DVERSION=\"$(VERSION)\" $(RPM_OPT_FLAGS) $(LFS) ++CFLAGS = -Wall $(EXTRA_CFLAGS) -D_GNU_SOURCE -D$(OS_NAME) -DVERSION=\"$(VERSION)\" $(RPM_OPT_FLAGS) $(LFS) + PROG = logrotate + MAN = logrotate.8 + LOADLIBES = -lpopt +diff -Nur logrotate-3.7.8.orig/config.c logrotate-3.7.8/config.c +--- logrotate-3.7.8.orig/config.c 2008-06-02 05:26:14.000000000 -0500 ++++ logrotate-3.7.8/config.c 2009-05-09 23:53:36.748287318 -0500 +@@ -33,8 +33,9 @@ #define isblank(c) ( (c) == ' ' || (c) == '\t' ) ? 1 : 0 #endif -static char *defTabooExts[] = { ".rpmsave", ".rpmorig", "~", ",v", -+static char *defTabooExts[] = { ".new", ".rpmsave", ".rpmorig", "~", ",v", - ".rpmnew", ".swp" +- ".rpmnew", ".swp", ".cfsaved", ".rhn-cfg-tmp-*" ++static char *defTabooExts[] = { ".new", ".orig", ".old", ".bak", ++ ".rpmsave", ".rpmorig", "~", ",v", ".rpmnew", ".swp", ".cfsaved", ++ ".rhn-cfg-tmp-*" }; static int defTabooCount = sizeof(defTabooExts) / sizeof(char *); -diff -u -r --new-file logrotate-3.7.4.orig/config.h logrotate-3.7.4/config.h ---- logrotate-3.7.4.orig/config.h 2005-11-12 13:07:56.000000000 -0600 -+++ logrotate-3.7.4/config.h 2006-09-21 01:08:02.000000000 -0500 -@@ -36,5 +36,5 @@ - #endif - #ifndef STATEFILE --#define STATEFILE "/var/lib/logrotate.status" +diff -Nur logrotate-3.7.8.orig/config.h logrotate-3.7.8/config.h +--- logrotate-3.7.8.orig/config.h 2005-11-12 13:07:56.000000000 -0600 ++++ logrotate-3.7.8/config.h 2009-05-09 23:58:17.040241145 -0500 +@@ -13,7 +13,7 @@ + #define DEFAULT_MAIL_COMMAND "/usr/bin/mailx" + #define COMPRESS_COMMAND "/usr/local/bin/gzip" + #define UNCOMPRESS_COMMAND "/usr/local/bin/gunzip" +-#define STATEFILE "/var/log/logrotate.status" +#define STATEFILE "/var/lib/logrotate/status" #endif -diff -u -r --new-file logrotate-3.7.4.orig/logrotate.8 logrotate-3.7.4/logrotate.8 ---- logrotate-3.7.4.orig/logrotate.8 2006-05-17 09:46:51.000000000 -0500 -+++ logrotate-3.7.4/logrotate.8 2006-09-21 01:07:14.000000000 -0500 -@@ -1,4 +1,4 @@ --.TH LOGROTATE 8 "Wed Nov 5 2002" "Red Hat Linux" "System Administrator's Manual" -+.TH LOGROTATE 8 "Wed Nov 5 2002" "Linux" "System Administrator's Manual" - .SH NAME - logrotate \- rotates, compresses, and mails system logs - .SH SYNOPSIS -@@ -410,7 +410,7 @@ + + /* +diff -Nur logrotate-3.7.8.orig/logrotate.8 logrotate-3.7.8/logrotate.8 +--- logrotate-3.7.8.orig/logrotate.8 2008-12-06 08:05:40.000000000 -0600 ++++ logrotate-3.7.8/logrotate.8 2009-05-09 23:56:45.137687740 -0500 +@@ -442,7 +442,7 @@ for information on the taboo extensions). If a + precedes the list of extensions, the current taboo extension list is augmented, otherwise it is replaced. At startup, the taboo extension list --contains .rpmorig, .rpmsave, ,v, .swp, .rpmnew, and ~. -+contains .new, .rpmorig, .rpmsave, ,v, .swp, .rpmnew, and ~. +-contains .rpmorig, .rpmsave, ,v, .swp, .rpmnew, ~, .cfsaved and .rhn-cfg-tmp-*. ++contains .new, .orig, .bak, .old, .rpmorig, .rpmsave, ,v, .swp, .rpmnew, ~, .cfsaved and .rhn-cfg-tmp-*. .TP \fBweekly\fR -@@ -427,7 +427,7 @@ +@@ -459,7 +459,7 @@ .SH FILES .PD 0 .TP 27 diff --git a/source/a/logrotate/slack-desc b/source/a/logrotate/slack-desc index 2a1c76a5d..e0fafdb5b 100644 --- a/source/a/logrotate/slack-desc +++ b/source/a/logrotate/slack-desc @@ -5,7 +5,7 @@ # exactly 11 lines for the formatting to be correct. It's also customary to # leave one space after the ':'. - |-----handy-ruler------------------------------------------------------| + |-----handy-ruler------------------------------------------------------| logrotate: logrotate (system log rotation tool) logrotate: logrotate: The logrotate utility is designed to simplify the administration diff --git a/source/a/lvm2/lvm2.SlackBuild b/source/a/lvm2/lvm2.SlackBuild index f0f630d89..5199f9c7d 100755 --- a/source/a/lvm2/lvm2.SlackBuild +++ b/source/a/lvm2/lvm2.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.02.40 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=$(echo LVM2.*.tar.?z* | cut -f 2- -d . | rev | cut -f 3- -d . | cut -f 1 -d - | rev) BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-lvm2 @@ -39,13 +49,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $PKG cd $TMP rm -rf LVM2.$VERSION -tar xvf $CWD/LVM2.$VERSION.tar.bz2 +tar xvf $CWD/LVM2.$VERSION.tar.xz cd LVM2.$VERSION || exit 1 chown -R root:root . @@ -55,23 +68,59 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# uid 0 = root +# gid 6 = disk CFLAGS="$SLKCFLAGS" \ ./configure \ --disable-readline \ --enable-cmdlib \ --enable-dmeventd \ - --libdir=/lib${LIBDIRSUFFIX} \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --with-usrlibdir=/usr/lib${LIBDIRSUFFIX} \ --mandir=/usr/man \ --enable-static_link \ - --with-lvm1=internal + --with-lvm1=internal \ + --enable-pkgconfig \ + --enable-udev_sync \ + --enable-udev_rules \ + --with-udev-prefix="" \ + --with-device-uid=0 \ + --with-device-gid=6 \ + --with-device-mode=0664 \ + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 + mv $PKG/etc/lvm/lvm.conf $PKG/etc/lvm/lvm.conf.new +if [ -d $PKG/usr/share/man ]; then # --mandir was ignored + mv $PKG/usr/share/man $PKG/usr + rmdir $PKG/usr/share +fi + +# Move the binary and shared library to /sbin and /lib{,64}: +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + for file in lib*.so.?.* ; do + mv $file ../../lib${LIBDIRSUFFIX} + ln -sf ../../lib${LIBDIRSUFFIX}/$file . + done + cp -a lib*.so.? ../../lib${LIBDIRSUFFIX} +) +# The Makefile is DIW. +( cd $PKG/usr/lib${LIBDIRSUFFIX} + find . -name "*.so" -type l | cut -b3- | while read file ; do + rm -f $file + ln -sf ${file}.?.* $file + done +) + ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) mkdir -p $PKG/usr/doc/LVM2.$VERSION @@ -99,5 +148,5 @@ zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -makepkg -l y -c n $TMP/lvm2-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/lvm2-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/mdadm/mdadm-2.6.4.tar.bz2.sign b/source/a/mdadm/mdadm-2.6.4.tar.bz2.sign deleted file mode 100644 index 36b614805..000000000 --- a/source/a/mdadm/mdadm-2.6.4.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.4.7 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQBHGC8JyGugalF9Dw4RArGIAJ9W38h+Mb/c62Ia6kn+TiDfd8ZxJQCfXEY8 -FdGihwdJnxz8cK3+VC4rmZs= -=+YBi ------END PGP SIGNATURE----- diff --git a/source/a/udev/udev-141.tar.bz2.sign b/source/a/mdadm/mdadm-2.6.9.tar.bz2.sign index a30826919..95c6050d4 100644 --- a/source/a/udev/udev-141.tar.bz2.sign +++ b/source/a/mdadm/mdadm-2.6.9.tar.bz2.sign @@ -2,7 +2,7 @@ Version: GnuPG v1.4.9 (GNU/Linux) Comment: See http://www.kernel.org/signature.html for info -iD8DBQBJ3TgkyGugalF9Dw4RAtJCAJ4+ns9bz4ZIu+3ecfra/BWrn3euqwCeOFQZ -6A7UqbHlTlD48sOk249ZATA= -=AY1A +iD8DBQBJtgO9yGugalF9Dw4RAjdkAJ9yrZow4cgdSuoqFbXROoDzH9EyTwCfSVY5 +Ew7L5NKxUJZbZVXseX82eT0= +=X/Wg -----END PGP SIGNATURE----- diff --git a/source/a/mdadm/mdadm.SlackBuild b/source/a/mdadm/mdadm.SlackBuild index 45cc83b31..4e59b7030 100755 --- a/source/a/mdadm/mdadm.SlackBuild +++ b/source/a/mdadm/mdadm.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.6.4 -ARCH=${ARCH:-x86_64} +VERSION=2.6.9 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-mdadm @@ -33,11 +42,11 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf mdadm-$VERSION -tar xjvf $CWD/mdadm-$VERSION.tar.bz2 +tar xjvf $CWD/mdadm-$VERSION.tar.bz2 || exit 1 cd mdadm-$VERSION -# Build this static... it's small enough. -zcat $CWD/mdadm.static.small.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 +# Build this static: +zcat $CWD/mdadm.static.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 chown -R root:root . find . \ diff --git a/source/a/mdadm/mdadm.static.diff b/source/a/mdadm/mdadm.static.diff new file mode 100644 index 000000000..ae8a46421 --- /dev/null +++ b/source/a/mdadm/mdadm.static.diff @@ -0,0 +1,11 @@ +--- ./Makefile.orig 2009-03-10 01:01:17.000000000 -0500 ++++ ./Makefile 2010-05-16 20:56:33.000000000 -0500 +@@ -55,7 +55,7 @@ + CFLAGS = $(CWFLAGS) $(CXFLAGS) -DSendmail=\""$(MAILCMD)"\" $(CONFFILEFLAGS) + + # If you want a static binary, you might uncomment these +-# LDFLAGS = -static ++LDFLAGS = -static + # STRIP = -s + + INSTALL = /usr/bin/install diff --git a/source/a/mdadm/mdadm.static.small.diff b/source/a/mdadm/mdadm.static.small.diff deleted file mode 100644 index 6be02fda5..000000000 --- a/source/a/mdadm/mdadm.static.small.diff +++ /dev/null @@ -1,20 +0,0 @@ ---- ./Makefile.orig 2006-06-15 19:21:52.000000000 -0500 -+++ ./Makefile 2006-06-25 00:28:24.000000000 -0500 -@@ -39,7 +39,7 @@ - - CC = $(CROSS_COMPILE)gcc - CXFLAGS = -ggdb --CWFLAGS = -Wall -Werror -Wstrict-prototypes -+CWFLAGS = -Wall -Werror -Wstrict-prototypes -Os - - ifdef DEBIAN - CPPFLAGS= -DDEBIAN -@@ -55,7 +55,7 @@ - CFLAGS = $(CWFLAGS) $(CXFLAGS) -DSendmail=\""$(MAILCMD)"\" $(CONFFILEFLAGS) - - # If you want a static binary, you might uncomment these --# LDFLAGS = -static -+LDFLAGS = -static - # STRIP = -s - - INSTALL = /usr/bin/install diff --git a/source/a/minicom/minicom.SlackBuild b/source/a/minicom/minicom.SlackBuild index c9249f64b..91e7baa9b 100755 --- a/source/a/minicom/minicom.SlackBuild +++ b/source/a/minicom/minicom.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,17 @@ VERSION=2.1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -35,6 +44,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG @@ -43,19 +54,28 @@ mkdir -p $TMP $PKG # minicom cd $TMP rm -rf minicom-$VERSION -tar xzvf $CWD/minicom-$VERSION.tar.gz +tar xzvf $CWD/minicom-$VERSION.tar.gz || exit 1 cd minicom-$VERSION + +# The following command renames the internal implementation of getline +# to g_getline as newer versions of Glibc provide an incompatible version: +sed -i -e "s/getline/g_&/" $(grep -lr getline *) + chown -R root:root . find . -perm 777 -exec chmod 755 {} \; find . -perm 664 -exec chmod 644 {} \; # Fix re-declaration of BC in termcap.h zcat $CWD/wintcap.diff.gz | patch -p1 --verbose || exit 1 + +## Forget it... it just doesn't help. +## Remove the autoconf program for this sorry old turd or abandon all hope. +#touch configure CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --sysconfdir=/etc -make -j3 -make install DESTDIR=$PKG +make -j3 || exit 1 +make install DESTDIR=$PKG || exit 1 mkdir -p $PKG/etc zcat $CWD/minicom.users.gz > $PKG/etc/minicom.users.new zcat $CWD/minirc.dfl.gz > $PKG/etc/minirc.dfl.new @@ -70,16 +90,17 @@ cp -a \ # If autoconf causes failure here (which it probably will), # remove it temporarily and the build should work fine... cd $TMP -tar xzvf $CWD/lrzsz_0.12.21.orig.tar.gz +tar xzvf $CWD/lrzsz_0.12.21.orig.tar.gz || exit 1 cd lrzsz-990823 # Make x86_64 a valid machine type (thanks to Fred Emmott) zcat $CWD/config.sub-x86_64.diff.gz | patch -p1 --verbose || exit 1 zcat $CWD/lrzsz_0.12.21-4.diff.gz | patch -p1 --verbose || exit 1 chown -R root:root . +#touch configure ./configure \ --prefix=/usr \ $ARCH-slackware-linux -make -j3 +make -j3 || exit 1 cd src cat lrz > $PKG/usr/bin/lrz cat lsz > $PKG/usr/bin/lsz diff --git a/source/a/mkinitrd/README.initrd b/source/a/mkinitrd/README.initrd index f027fa276..86d77539b 100644 --- a/source/a/mkinitrd/README.initrd +++ b/source/a/mkinitrd/README.initrd @@ -22,7 +22,7 @@ and before the main root filesystem is mounted. The usual reason to use an initrd is because you need to load kernel modules before mounting the root partition. Usually these modules are -required to support the filesystem used by the root partition (ext3, +required to support the filesystem used by the root partition (ext3, ext4, reiserfs, xfs), or perhaps the controller that the hard drive is attached to (SCSI, RAID, etc). Essentially, there are so many different options available in modern Linux kernels that it isn't practical to try to ship @@ -52,7 +52,7 @@ Now you'll want to run "mkinitrd". I'm using reiserfs for my root filesystem, and since it's an IDE system the reiserfs module will be the only one I need to load: - mkinitrd -c -k 2.6.29.5 -m reiserfs + mkinitrd -c -k 2.6.32.3 -m reiserfs This should do two things. First, it will create a directory /boot/initrd-tree containing the initrd's filesystem. Then it will @@ -61,11 +61,10 @@ you could make some additional changes in /boot/initrd-tree/ and then run mkinitrd again without options to rebuild the image. That's optional, though, and only advanced users will need to think about that. -Here's another example: Build an initrd image using Linux 2.6.29.5 -kernel modules for a system with an ext3 root partition on /dev/hdb3. -Note that you need the mbcache, jbd, and ext3 modules to use ext3: +Here's another example: Build an initrd image using Linux 2.6.32.3 +kernel modules for a system with an ext4 root partition on /dev/sdb3: - mkinitrd -c -k 2.6.29.5 -m mbcache:jbd:ext3 -f ext3 -r /dev/hdb3 + mkinitrd -c -k 2.6.32.3 -m ext4 -f ext4 -r /dev/sdb3 4. Now that I've built an initrd, how do I use it? @@ -77,10 +76,10 @@ initrd. Here's an example section of lilo.conf showing how this is done: # Linux bootable partition config begins -image = /boot/vmlinuz-generic-2.6.29.5 +image = /boot/vmlinuz-generic-2.6.32.3 initrd = /boot/initrd.gz - root = /dev/hda6 - label = Lnx26295 + root = /dev/sdb3 + label = Lnx26323 read-only # Linux bootable partition config ends diff --git a/source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff b/source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff deleted file mode 100644 index e4f64367c..000000000 --- a/source/a/mkinitrd/archive/busybox-1.7.2.no-gc-sections.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./Makefile.orig 2007-09-29 18:54:25.000000000 -0500 -+++ ./Makefile 2007-11-27 15:35:42.000000000 -0600 -@@ -570,7 +570,7 @@ - quiet_cmd_busybox__ ?= LINK $@ - cmd_busybox__ ?= $(srctree)/scripts/trylink $(CC) $(LDFLAGS) \ - -o $@ -Wl,-Map -Wl,$@.map \ -- -Wl,--warn-common -Wl,--sort-common -Wl,--gc-sections \ -+ -Wl,--warn-common -Wl,--sort-common \ - -Wl,--start-group $(busybox-all) -Wl,--end-group \ - $(LDLIBS) - diff --git a/source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff b/source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff deleted file mode 100644 index 99257fc76..000000000 --- a/source/a/mkinitrd/archive/busybox-1.7.2.remove_warning.diff +++ /dev/null @@ -1,20 +0,0 @@ ---- ./applets/applets.c.orig 2007-09-16 13:48:10.000000000 -0500 -+++ ./applets/applets.c 2007-10-04 22:07:47.000000000 -0500 -@@ -16,7 +16,7 @@ - #include "busybox.h" - - /* Apparently uclibc defines __GLIBC__ (compat trick?). Oh well. */ --#if ENABLE_STATIC && defined(__GLIBC__) && !defined(__UCLIBC__) -+/* #if ENABLE_STATIC && defined(__GLIBC__) && !defined(__UCLIBC__) - #warning Static linking against glibc produces buggy executables - #warning (glibc does not cope well with ld --gc-sections). - #warning See sources.redhat.com/bugzilla/show_bug.cgi?id=3400 -@@ -24,7 +24,7 @@ - #warning If you still want to do it, remove -Wl,--gc-sections - #warning from top-level Makefile and remove this warning. - #error Aborting compilation. --#endif -+#endif */ - - - /* Declare <applet>_main() */ diff --git a/source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2.sign b/source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2.sign deleted file mode 100644 index 19ac2fabe..000000000 --- a/source/a/mkinitrd/archive/busybox-1.7.2.tar.bz2.sign +++ /dev/null @@ -1,18 +0,0 @@ ------BEGIN PGP SIGNED MESSAGE----- -Hash: SHA1 - -busybox-1.7.2.tar.bz2 released Sun, 30 Sep 2007 01:02:10 +0100 - -MD5: c91ec9756e2000073a9dd8fa9fc3f89e busybox-1.7.2.tar.bz2 -SHA1: d9c618a7b104af4e70d623b1b6f3bc454405e12b busybox-1.7.2.tar.bz2 - -To verify this signature, you can obtain my public key -from http://busybox.net/~vda/vda_pubkey.gpg - ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.4.2.2 (GNU/Linux) - -iD8DBQFG/ueHR7cMVazJllsRAuBAAJ9r7SuXFQJCm/k0KZp39oDMsqBy7ACffZ9t -r/kwDWTYEr7doIKcNINt+p0= -=GHTs ------END PGP SIGNATURE----- diff --git a/source/a/mkinitrd/archive/busybox-dot-config.1.11.2 b/source/a/mkinitrd/archive/busybox-dot-config.1.11.2 deleted file mode 100644 index 012350efa..000000000 --- a/source/a/mkinitrd/archive/busybox-dot-config.1.11.2 +++ /dev/null @@ -1,855 +0,0 @@ -# -# Automatically generated make config: don't edit -# Busybox version: 1.11.2 -# Tue Sep 23 23:25:46 2008 -# -CONFIG_HAVE_DOT_CONFIG=y - -# -# Busybox Settings -# - -# -# General Configuration -# -CONFIG_DESKTOP=y -# CONFIG_FEATURE_ASSUME_UNICODE is not set -CONFIG_FEATURE_BUFFERS_USE_MALLOC=y -# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set -# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set -CONFIG_SHOW_USAGE=y -CONFIG_FEATURE_VERBOSE_USAGE=y -CONFIG_FEATURE_COMPRESS_USAGE=y -CONFIG_FEATURE_INSTALLER=y -CONFIG_LOCALE_SUPPORT=y -CONFIG_GETOPT_LONG=y -CONFIG_FEATURE_DEVPTS=y -# CONFIG_FEATURE_CLEAN_UP is not set -CONFIG_FEATURE_PIDFILE=y -CONFIG_FEATURE_SUID=y -CONFIG_FEATURE_SUID_CONFIG=y -CONFIG_FEATURE_SUID_CONFIG_QUIET=y -# CONFIG_SELINUX is not set -# CONFIG_FEATURE_PREFER_APPLETS is not set -CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" -CONFIG_FEATURE_SYSLOG=y -CONFIG_FEATURE_HAVE_RPC=y - -# -# Build Options -# -CONFIG_STATIC=y -# CONFIG_PIE is not set -# CONFIG_NOMMU is not set -# CONFIG_BUILD_LIBBUSYBOX is not set -# CONFIG_FEATURE_INDIVIDUAL is not set -# CONFIG_FEATURE_SHARED_BUSYBOX is not set -CONFIG_LFS=y -CONFIG_CROSS_COMPILER_PREFIX="" - -# -# Debugging Options -# -# CONFIG_DEBUG is not set -# CONFIG_DEBUG_PESSIMIZE is not set -# CONFIG_WERROR is not set -CONFIG_NO_DEBUG_LIB=y -# CONFIG_DMALLOC is not set -# CONFIG_EFENCE is not set -CONFIG_INCLUDE_SUSv2=y - -# -# Installation Options -# -CONFIG_INSTALL_NO_USR=y -CONFIG_INSTALL_APPLET_SYMLINKS=y -# CONFIG_INSTALL_APPLET_HARDLINKS is not set -# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set -# CONFIG_INSTALL_APPLET_DONT is not set -# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set -# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set -# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set -CONFIG_PREFIX="./_install" - -# -# Busybox Library Tuning -# -CONFIG_PASSWORD_MINLEN=6 -CONFIG_MD5_SIZE_VS_SPEED=2 -# CONFIG_FEATURE_FAST_TOP is not set -# CONFIG_FEATURE_ETC_NETWORKS is not set -CONFIG_FEATURE_EDITING=y -CONFIG_FEATURE_EDITING_MAX_LEN=1024 -CONFIG_FEATURE_EDITING_VI=y -CONFIG_FEATURE_EDITING_HISTORY=64 -# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set -CONFIG_FEATURE_TAB_COMPLETION=y -# CONFIG_FEATURE_USERNAME_COMPLETION is not set -CONFIG_FEATURE_EDITING_FANCY_PROMPT=y -CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y -CONFIG_FEATURE_COPYBUF_KB=4 -CONFIG_MONOTONIC_SYSCALL=y -CONFIG_IOCTL_HEX2STR_ERROR=y -# CONFIG_FEATURE_HWIB is not set - -# -# Applets -# - -# -# Archival Utilities -# -CONFIG_AR=y -CONFIG_FEATURE_AR_LONG_FILENAMES=y -CONFIG_BUNZIP2=y -CONFIG_BZIP2=y -CONFIG_CPIO=y -CONFIG_FEATURE_CPIO_O=y -# CONFIG_DPKG is not set -# CONFIG_DPKG_DEB is not set -# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set -CONFIG_GUNZIP=y -CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y -CONFIG_GZIP=y -CONFIG_RPM2CPIO=y -# CONFIG_RPM is not set -# CONFIG_FEATURE_RPM_BZ2 is not set -CONFIG_TAR=y -CONFIG_FEATURE_TAR_CREATE=y -CONFIG_FEATURE_TAR_GZIP=y -CONFIG_FEATURE_TAR_BZIP2=y -CONFIG_FEATURE_TAR_LZMA=y -CONFIG_FEATURE_TAR_COMPRESS=y -CONFIG_FEATURE_TAR_AUTODETECT=y -CONFIG_FEATURE_TAR_FROM=y -CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y -# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set -CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y -CONFIG_FEATURE_TAR_LONG_OPTIONS=y -CONFIG_FEATURE_TAR_UNAME_GNAME=y -CONFIG_UNCOMPRESS=y -CONFIG_UNLZMA=y -CONFIG_FEATURE_LZMA_FAST=y -CONFIG_UNZIP=y - -# -# Common options for cpio and tar -# -# CONFIG_FEATURE_DEB_TAR_GZ is not set -# CONFIG_FEATURE_DEB_TAR_BZ2 is not set -# CONFIG_FEATURE_DEB_TAR_LZMA is not set - -# -# Coreutils -# -CONFIG_BASENAME=y -CONFIG_CAL=y -CONFIG_CAT=y -CONFIG_CATV=y -CONFIG_CHGRP=y -CONFIG_CHMOD=y -CONFIG_CHOWN=y -CONFIG_CHROOT=y -CONFIG_CKSUM=y -CONFIG_COMM=y -CONFIG_CP=y -CONFIG_CUT=y -CONFIG_DATE=y -CONFIG_FEATURE_DATE_ISOFMT=y -CONFIG_DD=y -CONFIG_FEATURE_DD_SIGNAL_HANDLING=y -CONFIG_FEATURE_DD_IBS_OBS=y -CONFIG_DF=y -CONFIG_FEATURE_DF_INODE=y -CONFIG_DIRNAME=y -CONFIG_DOS2UNIX=y -CONFIG_UNIX2DOS=y -CONFIG_DU=y -CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y -CONFIG_ECHO=y -CONFIG_FEATURE_FANCY_ECHO=y -CONFIG_ENV=y -CONFIG_FEATURE_ENV_LONG_OPTIONS=y -CONFIG_EXPAND=y -CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y -CONFIG_EXPR=y -CONFIG_EXPR_MATH_SUPPORT_64=y -CONFIG_FALSE=y -CONFIG_FOLD=y -CONFIG_HEAD=y -CONFIG_FEATURE_FANCY_HEAD=y -CONFIG_HOSTID=y -CONFIG_ID=y -CONFIG_INSTALL=y -CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y -CONFIG_LENGTH=y -CONFIG_LN=y -CONFIG_LOGNAME=y -CONFIG_LS=y -CONFIG_FEATURE_LS_FILETYPES=y -CONFIG_FEATURE_LS_FOLLOWLINKS=y -CONFIG_FEATURE_LS_RECURSIVE=y -CONFIG_FEATURE_LS_SORTFILES=y -CONFIG_FEATURE_LS_TIMESTAMPS=y -CONFIG_FEATURE_LS_USERNAME=y -CONFIG_FEATURE_LS_COLOR=y -CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y -CONFIG_MD5SUM=y -CONFIG_MKDIR=y -CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y -CONFIG_MKFIFO=y -CONFIG_MKNOD=y -CONFIG_MV=y -CONFIG_FEATURE_MV_LONG_OPTIONS=y -CONFIG_NICE=y -CONFIG_NOHUP=y -CONFIG_OD=y -CONFIG_PRINTENV=y -CONFIG_PRINTF=y -CONFIG_PWD=y -CONFIG_READLINK=y -CONFIG_FEATURE_READLINK_FOLLOW=y -CONFIG_REALPATH=y -CONFIG_RM=y -CONFIG_RMDIR=y -# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set -CONFIG_SEQ=y -CONFIG_SHA1SUM=y -CONFIG_SLEEP=y -CONFIG_FEATURE_FANCY_SLEEP=y -CONFIG_SORT=y -CONFIG_FEATURE_SORT_BIG=y -CONFIG_SPLIT=y -CONFIG_FEATURE_SPLIT_FANCY=y -CONFIG_STAT=y -CONFIG_FEATURE_STAT_FORMAT=y -CONFIG_STTY=y -CONFIG_SUM=y -CONFIG_SYNC=y -CONFIG_TAC=y -CONFIG_TAIL=y -CONFIG_FEATURE_FANCY_TAIL=y -CONFIG_TEE=y -CONFIG_FEATURE_TEE_USE_BLOCK_IO=y -CONFIG_TEST=y -CONFIG_FEATURE_TEST_64=y -CONFIG_TOUCH=y -CONFIG_TR=y -CONFIG_FEATURE_TR_CLASSES=y -CONFIG_FEATURE_TR_EQUIV=y -CONFIG_TRUE=y -CONFIG_TTY=y -CONFIG_UNAME=y -CONFIG_UNEXPAND=y -CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y -CONFIG_UNIQ=y -CONFIG_USLEEP=y -CONFIG_UUDECODE=y -CONFIG_UUENCODE=y -CONFIG_WC=y -CONFIG_FEATURE_WC_LARGE=y -CONFIG_WHO=y -CONFIG_WHOAMI=y -CONFIG_YES=y - -# -# Common options for cp and mv -# -CONFIG_FEATURE_PRESERVE_HARDLINKS=y - -# -# Common options for ls, more and telnet -# -CONFIG_FEATURE_AUTOWIDTH=y - -# -# Common options for df, du, ls -# -CONFIG_FEATURE_HUMAN_READABLE=y - -# -# Common options for md5sum, sha1sum -# -CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y - -# -# Console Utilities -# -CONFIG_CHVT=y -CONFIG_CLEAR=y -CONFIG_DEALLOCVT=y -CONFIG_DUMPKMAP=y -CONFIG_KBD_MODE=y -CONFIG_LOADFONT=y -CONFIG_LOADKMAP=y -CONFIG_OPENVT=y -CONFIG_RESET=y -CONFIG_RESIZE=y -CONFIG_FEATURE_RESIZE_PRINT=y -CONFIG_SETCONSOLE=y -CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y -CONFIG_SETKEYCODES=y -CONFIG_SETLOGCONS=y - -# -# Debian Utilities -# -CONFIG_MKTEMP=y -CONFIG_PIPE_PROGRESS=y -CONFIG_RUN_PARTS=y -CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y -CONFIG_FEATURE_RUN_PARTS_FANCY=y -CONFIG_START_STOP_DAEMON=y -CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y -CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y -CONFIG_WHICH=y - -# -# Editors -# -CONFIG_AWK=y -CONFIG_FEATURE_AWK_MATH=y -CONFIG_CMP=y -CONFIG_DIFF=y -CONFIG_FEATURE_DIFF_BINARY=y -CONFIG_FEATURE_DIFF_DIR=y -CONFIG_FEATURE_DIFF_MINIMAL=y -CONFIG_ED=y -CONFIG_PATCH=y -CONFIG_SED=y -CONFIG_VI=y -CONFIG_FEATURE_VI_MAX_LEN=1024 -CONFIG_FEATURE_VI_8BIT=y -CONFIG_FEATURE_VI_COLON=y -CONFIG_FEATURE_VI_YANKMARK=y -CONFIG_FEATURE_VI_SEARCH=y -CONFIG_FEATURE_VI_USE_SIGNALS=y -CONFIG_FEATURE_VI_DOT_CMD=y -CONFIG_FEATURE_VI_READONLY=y -CONFIG_FEATURE_VI_SETOPTS=y -CONFIG_FEATURE_VI_SET=y -CONFIG_FEATURE_VI_WIN_RESIZE=y -CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y -CONFIG_FEATURE_ALLOW_EXEC=y - -# -# Finding Utilities -# -CONFIG_FIND=y -CONFIG_FEATURE_FIND_PRINT0=y -CONFIG_FEATURE_FIND_MTIME=y -CONFIG_FEATURE_FIND_MMIN=y -CONFIG_FEATURE_FIND_PERM=y -CONFIG_FEATURE_FIND_TYPE=y -CONFIG_FEATURE_FIND_XDEV=y -CONFIG_FEATURE_FIND_MAXDEPTH=y -CONFIG_FEATURE_FIND_NEWER=y -CONFIG_FEATURE_FIND_INUM=y -CONFIG_FEATURE_FIND_EXEC=y -CONFIG_FEATURE_FIND_USER=y -CONFIG_FEATURE_FIND_GROUP=y -CONFIG_FEATURE_FIND_NOT=y -CONFIG_FEATURE_FIND_DEPTH=y -CONFIG_FEATURE_FIND_PAREN=y -CONFIG_FEATURE_FIND_SIZE=y -CONFIG_FEATURE_FIND_PRUNE=y -# CONFIG_FEATURE_FIND_DELETE is not set -CONFIG_FEATURE_FIND_PATH=y -CONFIG_FEATURE_FIND_REGEX=y -# CONFIG_FEATURE_FIND_CONTEXT is not set -CONFIG_GREP=y -CONFIG_FEATURE_GREP_EGREP_ALIAS=y -CONFIG_FEATURE_GREP_FGREP_ALIAS=y -CONFIG_FEATURE_GREP_CONTEXT=y -CONFIG_XARGS=y -CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y -CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y -CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y -CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y - -# -# Init Utilities -# -CONFIG_INIT=y -# CONFIG_DEBUG_INIT is not set -CONFIG_FEATURE_USE_INITTAB=y -CONFIG_FEATURE_KILL_REMOVED=y -CONFIG_FEATURE_KILL_DELAY=10 -CONFIG_FEATURE_INIT_SCTTY=y -CONFIG_FEATURE_INIT_SYSLOG=y -CONFIG_FEATURE_EXTRA_QUIET=y -# CONFIG_FEATURE_INIT_COREDUMPS is not set -# CONFIG_FEATURE_INITRD is not set -CONFIG_HALT=y -CONFIG_MESG=y - -# -# Login/Password Management Utilities -# -CONFIG_FEATURE_SHADOWPASSWDS=y -# CONFIG_USE_BB_PWD_GRP is not set -# CONFIG_USE_BB_SHADOW is not set -CONFIG_USE_BB_CRYPT=y -CONFIG_ADDGROUP=y -CONFIG_FEATURE_ADDUSER_TO_GROUP=y -CONFIG_DELGROUP=y -CONFIG_FEATURE_DEL_USER_FROM_GROUP=y -CONFIG_FEATURE_CHECK_NAMES=y -CONFIG_ADDUSER=y -# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set -CONFIG_DELUSER=y -CONFIG_GETTY=y -CONFIG_FEATURE_UTMP=y -CONFIG_FEATURE_WTMP=y -CONFIG_LOGIN=y -# CONFIG_PAM is not set -CONFIG_LOGIN_SCRIPTS=y -CONFIG_FEATURE_NOLOGIN=y -# CONFIG_FEATURE_SECURETTY is not set -CONFIG_PASSWD=y -CONFIG_FEATURE_PASSWD_WEAK_CHECK=y -CONFIG_CRYPTPW=y -CONFIG_CHPASSWD=y -CONFIG_SU=y -CONFIG_FEATURE_SU_SYSLOG=y -CONFIG_FEATURE_SU_CHECKS_SHELLS=y -CONFIG_SULOGIN=y -CONFIG_VLOCK=y - -# -# Linux Ext2 FS Progs -# -CONFIG_CHATTR=y -CONFIG_FSCK=y -CONFIG_LSATTR=y - -# -# Linux Module Utilities -# -CONFIG_DEPMOD=y -# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set -CONFIG_FEATURE_DEPMOD_ALIAS=y -CONFIG_INSMOD=y -# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set -CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y -# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set -CONFIG_RMMOD=y -CONFIG_LSMOD=y -CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y -CONFIG_MODPROBE=y -CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y -CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y -CONFIG_FEATURE_MODPROBE_BLACKLIST=y - -# -# Options common to multiple modutils -# -CONFIG_FEATURE_CHECK_TAINTED_MODULE=y -CONFIG_FEATURE_2_4_MODULES=y -CONFIG_FEATURE_2_6_MODULES=y -CONFIG_DEFAULT_MODULES_DIR="/lib/modules" -CONFIG_DEFAULT_DEPMOD_FILE="modules.dep" -# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set - -# -# Linux System Utilities -# -CONFIG_DMESG=y -CONFIG_FEATURE_DMESG_PRETTY=y -CONFIG_FBSET=y -CONFIG_FEATURE_FBSET_FANCY=y -CONFIG_FEATURE_FBSET_READMODE=y -CONFIG_FDFLUSH=y -CONFIG_FDFORMAT=y -CONFIG_FDISK=y -CONFIG_FDISK_SUPPORT_LARGE_DISKS=y -CONFIG_FEATURE_FDISK_WRITABLE=y -# CONFIG_FEATURE_AIX_LABEL is not set -# CONFIG_FEATURE_SGI_LABEL is not set -# CONFIG_FEATURE_SUN_LABEL is not set -CONFIG_FEATURE_OSF_LABEL=y -CONFIG_FEATURE_FDISK_ADVANCED=y -# CONFIG_FINDFS is not set -CONFIG_FREERAMDISK=y -CONFIG_FSCK_MINIX=y -CONFIG_MKFS_MINIX=y - -# -# Minix filesystem support -# -CONFIG_FEATURE_MINIX2=y -CONFIG_GETOPT=y -CONFIG_HEXDUMP=y -CONFIG_FEATURE_HEXDUMP_REVERSE=y -CONFIG_HD=y -CONFIG_HWCLOCK=y -CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y -CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y -CONFIG_IPCRM=y -CONFIG_IPCS=y -CONFIG_LOSETUP=y -CONFIG_MDEV=y -CONFIG_FEATURE_MDEV_CONF=y -CONFIG_FEATURE_MDEV_RENAME=y -CONFIG_FEATURE_MDEV_RENAME_REGEXP=y -CONFIG_FEATURE_MDEV_EXEC=y -CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y -CONFIG_MKSWAP=y -CONFIG_FEATURE_MKSWAP_V0=y -CONFIG_MORE=y -CONFIG_FEATURE_USE_TERMIOS=y -CONFIG_VOLUMEID=y -CONFIG_FEATURE_VOLUMEID_EXT=y -CONFIG_FEATURE_VOLUMEID_REISERFS=y -CONFIG_FEATURE_VOLUMEID_FAT=y -CONFIG_FEATURE_VOLUMEID_HFS=y -CONFIG_FEATURE_VOLUMEID_JFS=y -CONFIG_FEATURE_VOLUMEID_XFS=y -CONFIG_FEATURE_VOLUMEID_NTFS=y -CONFIG_FEATURE_VOLUMEID_ISO9660=y -CONFIG_FEATURE_VOLUMEID_UDF=y -CONFIG_FEATURE_VOLUMEID_LUKS=y -CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y -CONFIG_FEATURE_VOLUMEID_CRAMFS=y -CONFIG_FEATURE_VOLUMEID_ROMFS=y -CONFIG_FEATURE_VOLUMEID_SYSV=y -# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set -CONFIG_FEATURE_VOLUMEID_LINUXRAID=y -CONFIG_MOUNT=y -CONFIG_FEATURE_MOUNT_FAKE=y -# CONFIG_FEATURE_MOUNT_VERBOSE is not set -CONFIG_FEATURE_MOUNT_HELPERS=y -CONFIG_FEATURE_MOUNT_LABEL=y -CONFIG_FEATURE_MOUNT_NFS=y -CONFIG_FEATURE_MOUNT_CIFS=y -CONFIG_FEATURE_MOUNT_FLAGS=y -CONFIG_FEATURE_MOUNT_FSTAB=y -CONFIG_PIVOT_ROOT=y -CONFIG_RDATE=y -CONFIG_READPROFILE=y -CONFIG_RTCWAKE=y -CONFIG_SCRIPT=y -CONFIG_SETARCH=y -CONFIG_SWAPONOFF=y -CONFIG_FEATURE_SWAPON_PRI=y -CONFIG_SWITCH_ROOT=y -CONFIG_UMOUNT=y -CONFIG_FEATURE_UMOUNT_ALL=y - -# -# Common options for mount/umount -# -CONFIG_FEATURE_MOUNT_LOOP=y -CONFIG_FEATURE_MTAB_SUPPORT=y - -# -# Miscellaneous Utilities -# -CONFIG_ADJTIMEX=y -CONFIG_BBCONFIG=y -CONFIG_CHAT=y -CONFIG_FEATURE_CHAT_NOFAIL=y -# CONFIG_FEATURE_CHAT_TTY_HIFI is not set -CONFIG_FEATURE_CHAT_IMPLICIT_CR=y -# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set -# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set -# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set -# CONFIG_FEATURE_CHAT_CLR_ABORT is not set -CONFIG_CHRT=y -CONFIG_CROND=y -# CONFIG_DEBUG_CROND_OPTION is not set -# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set -CONFIG_CRONTAB=y -CONFIG_DC=y -# CONFIG_DEVFSD is not set -# CONFIG_DEVFSD_MODLOAD is not set -# CONFIG_DEVFSD_FG_NP is not set -# CONFIG_DEVFSD_VERBOSE is not set -# CONFIG_FEATURE_DEVFS is not set -CONFIG_EJECT=y -CONFIG_FEATURE_EJECT_SCSI=y -CONFIG_FBSPLASH=y -CONFIG_INOTIFYD=y -CONFIG_LAST=y -CONFIG_FEATURE_LAST_SMALL=y -# CONFIG_FEATURE_LAST_FANCY is not set -CONFIG_LESS=y -CONFIG_FEATURE_LESS_MAXLINES=9999999 -CONFIG_FEATURE_LESS_BRACKETS=y -CONFIG_FEATURE_LESS_FLAGS=y -CONFIG_FEATURE_LESS_FLAGCS=y -CONFIG_FEATURE_LESS_MARKS=y -CONFIG_FEATURE_LESS_REGEXP=y -CONFIG_HDPARM=y -CONFIG_FEATURE_HDPARM_GET_IDENTITY=y -CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y -CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y -CONFIG_MAKEDEVS=y -# CONFIG_FEATURE_MAKEDEVS_LEAF is not set -CONFIG_FEATURE_MAKEDEVS_TABLE=y -# CONFIG_MAN is not set -# CONFIG_MICROCOM is not set -CONFIG_MOUNTPOINT=y -CONFIG_MT=y -CONFIG_RAIDAUTORUN=y -CONFIG_READAHEAD=y -CONFIG_RUNLEVEL=y -CONFIG_RX=y -CONFIG_SETSID=y -CONFIG_STRINGS=y -CONFIG_TASKSET=y -CONFIG_FEATURE_TASKSET_FANCY=y -CONFIG_TIME=y -CONFIG_TTYSIZE=y -CONFIG_WATCHDOG=y - -# -# Networking Utilities -# -CONFIG_FEATURE_IPV6=y -CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y -# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set -CONFIG_ARP=y -CONFIG_ARPING=y -CONFIG_BRCTL=y -# CONFIG_FEATURE_BRCTL_FANCY is not set -# CONFIG_FEATURE_BRCTL_SHOW is not set -CONFIG_DNSD=y -CONFIG_ETHER_WAKE=y -CONFIG_FAKEIDENTD=y -CONFIG_FTPGET=y -CONFIG_FTPPUT=y -CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y -CONFIG_HOSTNAME=y -# CONFIG_HTTPD is not set -# CONFIG_FEATURE_HTTPD_RANGES is not set -# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set -# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set -# CONFIG_FEATURE_HTTPD_SETUID is not set -# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set -# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set -# CONFIG_FEATURE_HTTPD_CGI is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set -# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set -# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set -# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set -# CONFIG_FEATURE_HTTPD_PROXY is not set -CONFIG_IFCONFIG=y -CONFIG_FEATURE_IFCONFIG_STATUS=y -CONFIG_FEATURE_IFCONFIG_SLIP=y -CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y -CONFIG_FEATURE_IFCONFIG_HW=y -CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y -CONFIG_IFENSLAVE=y -CONFIG_IFUPDOWN=y -CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" -CONFIG_FEATURE_IFUPDOWN_IP=y -CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y -# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set -CONFIG_FEATURE_IFUPDOWN_IPV4=y -CONFIG_FEATURE_IFUPDOWN_IPV6=y -CONFIG_FEATURE_IFUPDOWN_MAPPING=y -CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y -# CONFIG_INETD is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set -# CONFIG_FEATURE_INETD_RPC is not set -CONFIG_IP=y -CONFIG_FEATURE_IP_ADDRESS=y -CONFIG_FEATURE_IP_LINK=y -CONFIG_FEATURE_IP_ROUTE=y -CONFIG_FEATURE_IP_TUNNEL=y -CONFIG_FEATURE_IP_RULE=y -CONFIG_FEATURE_IP_SHORT_FORMS=y -# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set -CONFIG_IPADDR=y -CONFIG_IPLINK=y -CONFIG_IPROUTE=y -CONFIG_IPTUNNEL=y -CONFIG_IPRULE=y -CONFIG_IPCALC=y -CONFIG_FEATURE_IPCALC_FANCY=y -CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y -CONFIG_NAMEIF=y -# CONFIG_FEATURE_NAMEIF_EXTENDED is not set -CONFIG_NC=y -CONFIG_NC_SERVER=y -CONFIG_NC_EXTRA=y -CONFIG_NETSTAT=y -# CONFIG_FEATURE_NETSTAT_WIDE is not set -CONFIG_NSLOOKUP=y -CONFIG_PING=y -CONFIG_PING6=y -CONFIG_FEATURE_FANCY_PING=y -CONFIG_PSCAN=y -CONFIG_ROUTE=y -# CONFIG_SENDMAIL is not set -# CONFIG_FETCHMAIL is not set -CONFIG_SLATTACH=y -CONFIG_TELNET=y -CONFIG_FEATURE_TELNET_TTYPE=y -CONFIG_FEATURE_TELNET_AUTOLOGIN=y -CONFIG_TELNETD=y -CONFIG_FEATURE_TELNETD_STANDALONE=y -CONFIG_TFTP=y -# CONFIG_TFTPD is not set -CONFIG_FEATURE_TFTP_GET=y -CONFIG_FEATURE_TFTP_PUT=y -CONFIG_FEATURE_TFTP_BLOCKSIZE=y -# CONFIG_DEBUG_TFTP is not set -CONFIG_TRACEROUTE=y -# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set -# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set -# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set -# CONFIG_APP_UDHCPD is not set -# CONFIG_APP_DHCPRELAY is not set -# CONFIG_APP_DUMPLEASES is not set -# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set -CONFIG_DHCPD_LEASES_FILE="" -# CONFIG_APP_UDHCPC is not set -# CONFIG_FEATURE_UDHCPC_ARPING is not set -# CONFIG_FEATURE_UDHCP_PORT is not set -# CONFIG_FEATURE_UDHCP_DEBUG is not set -# CONFIG_FEATURE_RFC3397 is not set -CONFIG_DHCPC_DEFAULT_SCRIPT="" -CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS= -CONFIG_VCONFIG=y -CONFIG_WGET=y -CONFIG_FEATURE_WGET_STATUSBAR=y -CONFIG_FEATURE_WGET_AUTHENTICATION=y -CONFIG_FEATURE_WGET_LONG_OPTIONS=y -CONFIG_ZCIP=y -CONFIG_TCPSVD=y -CONFIG_UDPSVD=y - -# -# Process Utilities -# -CONFIG_FREE=y -CONFIG_FUSER=y -CONFIG_KILL=y -CONFIG_KILLALL=y -CONFIG_KILLALL5=y -CONFIG_NMETER=y -CONFIG_PGREP=y -CONFIG_PIDOF=y -CONFIG_FEATURE_PIDOF_SINGLE=y -CONFIG_FEATURE_PIDOF_OMIT=y -CONFIG_PKILL=y -CONFIG_PS=y -CONFIG_FEATURE_PS_WIDE=y -CONFIG_FEATURE_PS_TIME=y -# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set -CONFIG_RENICE=y -CONFIG_BB_SYSCTL=y -CONFIG_TOP=y -CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y -CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y -CONFIG_FEATURE_TOP_DECIMALS=y -CONFIG_FEATURE_TOPMEM=y -CONFIG_UPTIME=y -CONFIG_WATCH=y - -# -# Shells -# -CONFIG_FEATURE_SH_IS_ASH=y -# CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_MSH is not set -# CONFIG_FEATURE_SH_IS_NONE is not set -CONFIG_ASH=y - -# -# Ash Shell Options -# -CONFIG_ASH_BASH_COMPAT=y -CONFIG_ASH_JOB_CONTROL=y -CONFIG_ASH_READ_NCHARS=y -CONFIG_ASH_READ_TIMEOUT=y -CONFIG_ASH_ALIAS=y -CONFIG_ASH_MATH_SUPPORT=y -CONFIG_ASH_MATH_SUPPORT_64=y -CONFIG_ASH_GETOPTS=y -CONFIG_ASH_BUILTIN_ECHO=y -CONFIG_ASH_BUILTIN_PRINTF=y -CONFIG_ASH_BUILTIN_TEST=y -CONFIG_ASH_CMDCMD=y -CONFIG_ASH_MAIL=y -CONFIG_ASH_OPTIMIZE_FOR_SIZE=y -CONFIG_ASH_RANDOM_SUPPORT=y -CONFIG_ASH_EXPAND_PRMT=y -# CONFIG_HUSH is not set -# CONFIG_HUSH_HELP is not set -# CONFIG_HUSH_INTERACTIVE is not set -# CONFIG_HUSH_JOB is not set -# CONFIG_HUSH_TICK is not set -# CONFIG_HUSH_IF is not set -# CONFIG_HUSH_LOOPS is not set -# CONFIG_LASH is not set -# CONFIG_MSH is not set - -# -# Bourne Shell Options -# -CONFIG_FEATURE_SH_EXTRA_QUIET=y -# CONFIG_FEATURE_SH_STANDALONE is not set -# CONFIG_FEATURE_SH_NOFORK is not set -CONFIG_CTTYHACK=y - -# -# System Logging Utilities -# -CONFIG_SYSLOGD=y -CONFIG_FEATURE_ROTATE_LOGFILE=y -CONFIG_FEATURE_REMOTE_LOG=y -# CONFIG_FEATURE_SYSLOGD_DUP is not set -CONFIG_FEATURE_IPC_SYSLOG=y -CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16 -CONFIG_LOGREAD=y -CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y -CONFIG_KLOGD=y -CONFIG_LOGGER=y - -# -# Runit Utilities -# -CONFIG_RUNSV=y -CONFIG_RUNSVDIR=y -CONFIG_SV=y -CONFIG_SVLOGD=y -CONFIG_CHPST=y -CONFIG_SETUIDGID=y -CONFIG_ENVUIDGID=y -CONFIG_ENVDIR=y -CONFIG_SOFTLIMIT=y -# CONFIG_CHCON is not set -# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set -# CONFIG_GETENFORCE is not set -# CONFIG_GETSEBOOL is not set -# CONFIG_LOAD_POLICY is not set -# CONFIG_MATCHPATHCON is not set -# CONFIG_RESTORECON is not set -# CONFIG_RUNCON is not set -# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set -# CONFIG_SELINUXENABLED is not set -# CONFIG_SETENFORCE is not set -# CONFIG_SETFILES is not set -# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set -# CONFIG_SETSEBOOL is not set -# CONFIG_SESTATUS is not set - -# -# Print Utilities -# -# CONFIG_LPD is not set -CONFIG_LPR=y -# CONFIG_LPQ is not set diff --git a/source/a/mkinitrd/archive/busybox-dot-config.1.12.0 b/source/a/mkinitrd/archive/busybox-dot-config.1.12.0 deleted file mode 100644 index b462fe9a1..000000000 --- a/source/a/mkinitrd/archive/busybox-dot-config.1.12.0 +++ /dev/null @@ -1,857 +0,0 @@ -# -# Automatically generated make config: don't edit -# Busybox version: 1.12.0 -# Thu Sep 25 12:38:54 2008 -# -CONFIG_HAVE_DOT_CONFIG=y - -# -# Busybox Settings -# - -# -# General Configuration -# -CONFIG_DESKTOP=y -# CONFIG_EXTRA_COMPAT is not set -# CONFIG_FEATURE_ASSUME_UNICODE is not set -CONFIG_FEATURE_BUFFERS_USE_MALLOC=y -# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set -# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set -CONFIG_SHOW_USAGE=y -CONFIG_FEATURE_VERBOSE_USAGE=y -CONFIG_FEATURE_COMPRESS_USAGE=y -CONFIG_FEATURE_INSTALLER=y -CONFIG_LOCALE_SUPPORT=y -CONFIG_GETOPT_LONG=y -CONFIG_FEATURE_DEVPTS=y -# CONFIG_FEATURE_CLEAN_UP is not set -CONFIG_FEATURE_PIDFILE=y -CONFIG_FEATURE_SUID=y -CONFIG_FEATURE_SUID_CONFIG=y -CONFIG_FEATURE_SUID_CONFIG_QUIET=y -# CONFIG_SELINUX is not set -# CONFIG_FEATURE_PREFER_APPLETS is not set -CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" -CONFIG_FEATURE_SYSLOG=y -CONFIG_FEATURE_HAVE_RPC=y - -# -# Build Options -# -CONFIG_STATIC=y -# CONFIG_PIE is not set -# CONFIG_NOMMU is not set -# CONFIG_BUILD_LIBBUSYBOX is not set -# CONFIG_FEATURE_INDIVIDUAL is not set -# CONFIG_FEATURE_SHARED_BUSYBOX is not set -CONFIG_LFS=y -CONFIG_CROSS_COMPILER_PREFIX="" - -# -# Debugging Options -# -# CONFIG_DEBUG is not set -# CONFIG_DEBUG_PESSIMIZE is not set -# CONFIG_WERROR is not set -CONFIG_NO_DEBUG_LIB=y -# CONFIG_DMALLOC is not set -# CONFIG_EFENCE is not set -CONFIG_INCLUDE_SUSv2=y -# CONFIG_PARSE is not set - -# -# Installation Options -# -CONFIG_INSTALL_NO_USR=y -CONFIG_INSTALL_APPLET_SYMLINKS=y -# CONFIG_INSTALL_APPLET_HARDLINKS is not set -# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set -# CONFIG_INSTALL_APPLET_DONT is not set -# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set -# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set -# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set -CONFIG_PREFIX="./_install" - -# -# Busybox Library Tuning -# -CONFIG_PASSWORD_MINLEN=6 -CONFIG_MD5_SIZE_VS_SPEED=2 -# CONFIG_FEATURE_FAST_TOP is not set -# CONFIG_FEATURE_ETC_NETWORKS is not set -CONFIG_FEATURE_EDITING=y -CONFIG_FEATURE_EDITING_MAX_LEN=1024 -CONFIG_FEATURE_EDITING_VI=y -CONFIG_FEATURE_EDITING_HISTORY=64 -# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set -CONFIG_FEATURE_TAB_COMPLETION=y -# CONFIG_FEATURE_USERNAME_COMPLETION is not set -CONFIG_FEATURE_EDITING_FANCY_PROMPT=y -CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y -CONFIG_FEATURE_COPYBUF_KB=4 -CONFIG_MONOTONIC_SYSCALL=y -CONFIG_IOCTL_HEX2STR_ERROR=y -# CONFIG_FEATURE_HWIB is not set - -# -# Applets -# - -# -# Archival Utilities -# -# CONFIG_FEATURE_SEAMLESS_LZMA is not set -CONFIG_FEATURE_SEAMLESS_BZ2=y -CONFIG_FEATURE_SEAMLESS_GZ=y -CONFIG_FEATURE_SEAMLESS_Z=y -CONFIG_AR=y -CONFIG_FEATURE_AR_LONG_FILENAMES=y -CONFIG_BUNZIP2=y -CONFIG_BZIP2=y -CONFIG_CPIO=y -CONFIG_FEATURE_CPIO_O=y -# CONFIG_DPKG is not set -# CONFIG_DPKG_DEB is not set -# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set -CONFIG_GUNZIP=y -CONFIG_GZIP=y -CONFIG_RPM2CPIO=y -# CONFIG_RPM is not set -CONFIG_TAR=y -CONFIG_FEATURE_TAR_CREATE=y -CONFIG_FEATURE_TAR_AUTODETECT=y -CONFIG_FEATURE_TAR_FROM=y -CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y -# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set -CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y -CONFIG_FEATURE_TAR_LONG_OPTIONS=y -CONFIG_FEATURE_TAR_UNAME_GNAME=y -CONFIG_UNCOMPRESS=y -CONFIG_UNLZMA=y -CONFIG_FEATURE_LZMA_FAST=y -CONFIG_UNZIP=y - -# -# Coreutils -# -CONFIG_BASENAME=y -CONFIG_CAL=y -CONFIG_CAT=y -CONFIG_CATV=y -CONFIG_CHGRP=y -CONFIG_CHMOD=y -CONFIG_CHOWN=y -CONFIG_CHROOT=y -CONFIG_CKSUM=y -CONFIG_COMM=y -CONFIG_CP=y -CONFIG_CUT=y -CONFIG_DATE=y -CONFIG_FEATURE_DATE_ISOFMT=y -CONFIG_DD=y -CONFIG_FEATURE_DD_SIGNAL_HANDLING=y -CONFIG_FEATURE_DD_IBS_OBS=y -CONFIG_DF=y -CONFIG_FEATURE_DF_INODE=y -CONFIG_DIRNAME=y -CONFIG_DOS2UNIX=y -CONFIG_UNIX2DOS=y -CONFIG_DU=y -CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y -CONFIG_ECHO=y -CONFIG_FEATURE_FANCY_ECHO=y -CONFIG_ENV=y -CONFIG_FEATURE_ENV_LONG_OPTIONS=y -CONFIG_EXPAND=y -CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y -CONFIG_EXPR=y -CONFIG_EXPR_MATH_SUPPORT_64=y -CONFIG_FALSE=y -CONFIG_FOLD=y -CONFIG_HEAD=y -CONFIG_FEATURE_FANCY_HEAD=y -CONFIG_HOSTID=y -CONFIG_ID=y -CONFIG_INSTALL=y -CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y -CONFIG_LENGTH=y -CONFIG_LN=y -CONFIG_LOGNAME=y -CONFIG_LS=y -CONFIG_FEATURE_LS_FILETYPES=y -CONFIG_FEATURE_LS_FOLLOWLINKS=y -CONFIG_FEATURE_LS_RECURSIVE=y -CONFIG_FEATURE_LS_SORTFILES=y -CONFIG_FEATURE_LS_TIMESTAMPS=y -CONFIG_FEATURE_LS_USERNAME=y -CONFIG_FEATURE_LS_COLOR=y -CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y -CONFIG_MD5SUM=y -CONFIG_MKDIR=y -CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y -CONFIG_MKFIFO=y -CONFIG_MKNOD=y -CONFIG_MV=y -CONFIG_FEATURE_MV_LONG_OPTIONS=y -CONFIG_NICE=y -CONFIG_NOHUP=y -CONFIG_OD=y -CONFIG_PRINTENV=y -CONFIG_PRINTF=y -CONFIG_PWD=y -CONFIG_READLINK=y -CONFIG_FEATURE_READLINK_FOLLOW=y -CONFIG_REALPATH=y -CONFIG_RM=y -CONFIG_RMDIR=y -# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set -CONFIG_SEQ=y -CONFIG_SHA1SUM=y -CONFIG_SLEEP=y -CONFIG_FEATURE_FANCY_SLEEP=y -# CONFIG_FEATURE_FLOAT_SLEEP is not set -CONFIG_SORT=y -CONFIG_FEATURE_SORT_BIG=y -CONFIG_SPLIT=y -CONFIG_FEATURE_SPLIT_FANCY=y -CONFIG_STAT=y -CONFIG_FEATURE_STAT_FORMAT=y -CONFIG_STTY=y -CONFIG_SUM=y -CONFIG_SYNC=y -CONFIG_TAC=y -CONFIG_TAIL=y -CONFIG_FEATURE_FANCY_TAIL=y -CONFIG_TEE=y -CONFIG_FEATURE_TEE_USE_BLOCK_IO=y -CONFIG_TEST=y -CONFIG_FEATURE_TEST_64=y -CONFIG_TOUCH=y -CONFIG_TR=y -CONFIG_FEATURE_TR_CLASSES=y -CONFIG_FEATURE_TR_EQUIV=y -CONFIG_TRUE=y -CONFIG_TTY=y -CONFIG_UNAME=y -CONFIG_UNEXPAND=y -CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y -CONFIG_UNIQ=y -CONFIG_USLEEP=y -CONFIG_UUDECODE=y -CONFIG_UUENCODE=y -CONFIG_WC=y -CONFIG_FEATURE_WC_LARGE=y -CONFIG_WHO=y -CONFIG_WHOAMI=y -CONFIG_YES=y - -# -# Common options for cp and mv -# -CONFIG_FEATURE_PRESERVE_HARDLINKS=y - -# -# Common options for ls, more and telnet -# -CONFIG_FEATURE_AUTOWIDTH=y - -# -# Common options for df, du, ls -# -CONFIG_FEATURE_HUMAN_READABLE=y - -# -# Common options for md5sum, sha1sum -# -CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y - -# -# Console Utilities -# -CONFIG_CHVT=y -CONFIG_CLEAR=y -CONFIG_DEALLOCVT=y -CONFIG_DUMPKMAP=y -CONFIG_KBD_MODE=y -CONFIG_LOADFONT=y -CONFIG_LOADKMAP=y -CONFIG_OPENVT=y -CONFIG_RESET=y -CONFIG_RESIZE=y -CONFIG_FEATURE_RESIZE_PRINT=y -CONFIG_SETCONSOLE=y -CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y -CONFIG_SETFONT=y -CONFIG_SETKEYCODES=y -CONFIG_SETLOGCONS=y -CONFIG_SHOWKEY=y - -# -# Debian Utilities -# -CONFIG_MKTEMP=y -CONFIG_PIPE_PROGRESS=y -CONFIG_RUN_PARTS=y -CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y -CONFIG_FEATURE_RUN_PARTS_FANCY=y -CONFIG_START_STOP_DAEMON=y -CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y -CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y -CONFIG_WHICH=y - -# -# Editors -# -CONFIG_AWK=y -CONFIG_FEATURE_AWK_MATH=y -CONFIG_CMP=y -CONFIG_DIFF=y -CONFIG_FEATURE_DIFF_BINARY=y -CONFIG_FEATURE_DIFF_DIR=y -CONFIG_FEATURE_DIFF_MINIMAL=y -CONFIG_ED=y -CONFIG_PATCH=y -CONFIG_SED=y -CONFIG_VI=y -CONFIG_FEATURE_VI_MAX_LEN=1024 -CONFIG_FEATURE_VI_8BIT=y -CONFIG_FEATURE_VI_COLON=y -CONFIG_FEATURE_VI_YANKMARK=y -CONFIG_FEATURE_VI_SEARCH=y -CONFIG_FEATURE_VI_USE_SIGNALS=y -CONFIG_FEATURE_VI_DOT_CMD=y -CONFIG_FEATURE_VI_READONLY=y -CONFIG_FEATURE_VI_SETOPTS=y -CONFIG_FEATURE_VI_SET=y -CONFIG_FEATURE_VI_WIN_RESIZE=y -CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y -CONFIG_FEATURE_ALLOW_EXEC=y - -# -# Finding Utilities -# -CONFIG_FIND=y -CONFIG_FEATURE_FIND_PRINT0=y -CONFIG_FEATURE_FIND_MTIME=y -CONFIG_FEATURE_FIND_MMIN=y -CONFIG_FEATURE_FIND_PERM=y -CONFIG_FEATURE_FIND_TYPE=y -CONFIG_FEATURE_FIND_XDEV=y -CONFIG_FEATURE_FIND_MAXDEPTH=y -CONFIG_FEATURE_FIND_NEWER=y -CONFIG_FEATURE_FIND_INUM=y -CONFIG_FEATURE_FIND_EXEC=y -CONFIG_FEATURE_FIND_USER=y -CONFIG_FEATURE_FIND_GROUP=y -CONFIG_FEATURE_FIND_NOT=y -CONFIG_FEATURE_FIND_DEPTH=y -CONFIG_FEATURE_FIND_PAREN=y -CONFIG_FEATURE_FIND_SIZE=y -CONFIG_FEATURE_FIND_PRUNE=y -# CONFIG_FEATURE_FIND_DELETE is not set -CONFIG_FEATURE_FIND_PATH=y -CONFIG_FEATURE_FIND_REGEX=y -# CONFIG_FEATURE_FIND_CONTEXT is not set -CONFIG_GREP=y -CONFIG_FEATURE_GREP_EGREP_ALIAS=y -CONFIG_FEATURE_GREP_FGREP_ALIAS=y -CONFIG_FEATURE_GREP_CONTEXT=y -CONFIG_XARGS=y -CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y -CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y -CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y -CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y - -# -# Init Utilities -# -CONFIG_INIT=y -# CONFIG_DEBUG_INIT is not set -CONFIG_FEATURE_USE_INITTAB=y -CONFIG_FEATURE_KILL_REMOVED=y -CONFIG_FEATURE_KILL_DELAY=10 -CONFIG_FEATURE_INIT_SCTTY=y -CONFIG_FEATURE_INIT_SYSLOG=y -CONFIG_FEATURE_EXTRA_QUIET=y -# CONFIG_FEATURE_INIT_COREDUMPS is not set -# CONFIG_FEATURE_INITRD is not set -CONFIG_HALT=y -CONFIG_MESG=y - -# -# Login/Password Management Utilities -# -CONFIG_FEATURE_SHADOWPASSWDS=y -# CONFIG_USE_BB_PWD_GRP is not set -# CONFIG_USE_BB_SHADOW is not set -CONFIG_USE_BB_CRYPT=y -CONFIG_ADDGROUP=y -CONFIG_FEATURE_ADDUSER_TO_GROUP=y -CONFIG_DELGROUP=y -CONFIG_FEATURE_DEL_USER_FROM_GROUP=y -CONFIG_FEATURE_CHECK_NAMES=y -CONFIG_ADDUSER=y -# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set -CONFIG_DELUSER=y -CONFIG_GETTY=y -CONFIG_FEATURE_UTMP=y -CONFIG_FEATURE_WTMP=y -CONFIG_LOGIN=y -# CONFIG_PAM is not set -CONFIG_LOGIN_SCRIPTS=y -CONFIG_FEATURE_NOLOGIN=y -# CONFIG_FEATURE_SECURETTY is not set -CONFIG_PASSWD=y -CONFIG_FEATURE_PASSWD_WEAK_CHECK=y -CONFIG_CRYPTPW=y -CONFIG_CHPASSWD=y -CONFIG_SU=y -CONFIG_FEATURE_SU_SYSLOG=y -CONFIG_FEATURE_SU_CHECKS_SHELLS=y -CONFIG_SULOGIN=y -CONFIG_VLOCK=y - -# -# Linux Ext2 FS Progs -# -CONFIG_CHATTR=y -CONFIG_FSCK=y -CONFIG_LSATTR=y - -# -# Linux Module Utilities -# -# CONFIG_MODPROBE_SMALL is not set -# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set -# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set -CONFIG_DEPMOD=y -# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set -CONFIG_FEATURE_DEPMOD_ALIAS=y -CONFIG_INSMOD=y -# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set -CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y -# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set -CONFIG_RMMOD=y -CONFIG_LSMOD=y -CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y -CONFIG_MODPROBE=y -CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y -CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y -CONFIG_FEATURE_MODPROBE_BLACKLIST=y - -# -# Options common to multiple modutils -# -CONFIG_FEATURE_CHECK_TAINTED_MODULE=y -CONFIG_FEATURE_2_4_MODULES=y -CONFIG_FEATURE_2_6_MODULES=y -CONFIG_DEFAULT_MODULES_DIR="/lib/modules" -CONFIG_DEFAULT_DEPMOD_FILE="modules.dep" -# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set - -# -# Linux System Utilities -# -CONFIG_DMESG=y -CONFIG_FEATURE_DMESG_PRETTY=y -CONFIG_FBSET=y -CONFIG_FEATURE_FBSET_FANCY=y -CONFIG_FEATURE_FBSET_READMODE=y -CONFIG_FDFLUSH=y -CONFIG_FDFORMAT=y -CONFIG_FDISK=y -CONFIG_FDISK_SUPPORT_LARGE_DISKS=y -CONFIG_FEATURE_FDISK_WRITABLE=y -# CONFIG_FEATURE_AIX_LABEL is not set -# CONFIG_FEATURE_SGI_LABEL is not set -# CONFIG_FEATURE_SUN_LABEL is not set -CONFIG_FEATURE_OSF_LABEL=y -CONFIG_FEATURE_FDISK_ADVANCED=y -# CONFIG_FINDFS is not set -CONFIG_FREERAMDISK=y -CONFIG_FSCK_MINIX=y -CONFIG_MKFS_MINIX=y - -# -# Minix filesystem support -# -CONFIG_FEATURE_MINIX2=y -CONFIG_GETOPT=y -CONFIG_HEXDUMP=y -CONFIG_FEATURE_HEXDUMP_REVERSE=y -CONFIG_HD=y -CONFIG_HWCLOCK=y -CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y -CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y -CONFIG_IPCRM=y -CONFIG_IPCS=y -CONFIG_LOSETUP=y -CONFIG_MDEV=y -CONFIG_FEATURE_MDEV_CONF=y -CONFIG_FEATURE_MDEV_RENAME=y -CONFIG_FEATURE_MDEV_RENAME_REGEXP=y -CONFIG_FEATURE_MDEV_EXEC=y -CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y -CONFIG_MKSWAP=y -CONFIG_FEATURE_MKSWAP_V0=y -CONFIG_MORE=y -CONFIG_FEATURE_USE_TERMIOS=y -CONFIG_VOLUMEID=y -CONFIG_FEATURE_VOLUMEID_EXT=y -CONFIG_FEATURE_VOLUMEID_REISERFS=y -CONFIG_FEATURE_VOLUMEID_FAT=y -CONFIG_FEATURE_VOLUMEID_HFS=y -CONFIG_FEATURE_VOLUMEID_JFS=y -CONFIG_FEATURE_VOLUMEID_XFS=y -CONFIG_FEATURE_VOLUMEID_NTFS=y -CONFIG_FEATURE_VOLUMEID_ISO9660=y -CONFIG_FEATURE_VOLUMEID_UDF=y -CONFIG_FEATURE_VOLUMEID_LUKS=y -CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y -CONFIG_FEATURE_VOLUMEID_CRAMFS=y -CONFIG_FEATURE_VOLUMEID_ROMFS=y -CONFIG_FEATURE_VOLUMEID_SYSV=y -# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set -CONFIG_FEATURE_VOLUMEID_LINUXRAID=y -CONFIG_MOUNT=y -CONFIG_FEATURE_MOUNT_FAKE=y -# CONFIG_FEATURE_MOUNT_VERBOSE is not set -CONFIG_FEATURE_MOUNT_HELPERS=y -CONFIG_FEATURE_MOUNT_LABEL=y -CONFIG_FEATURE_MOUNT_NFS=y -CONFIG_FEATURE_MOUNT_CIFS=y -CONFIG_FEATURE_MOUNT_FLAGS=y -CONFIG_FEATURE_MOUNT_FSTAB=y -CONFIG_PIVOT_ROOT=y -CONFIG_RDATE=y -CONFIG_RDEV=y -CONFIG_READPROFILE=y -CONFIG_RTCWAKE=y -CONFIG_SCRIPT=y -CONFIG_SETARCH=y -CONFIG_SWAPONOFF=y -CONFIG_FEATURE_SWAPON_PRI=y -CONFIG_SWITCH_ROOT=y -CONFIG_UMOUNT=y -CONFIG_FEATURE_UMOUNT_ALL=y - -# -# Common options for mount/umount -# -CONFIG_FEATURE_MOUNT_LOOP=y -CONFIG_FEATURE_MTAB_SUPPORT=y - -# -# Miscellaneous Utilities -# -CONFIG_ADJTIMEX=y -CONFIG_BBCONFIG=y -CONFIG_CHAT=y -CONFIG_FEATURE_CHAT_NOFAIL=y -# CONFIG_FEATURE_CHAT_TTY_HIFI is not set -CONFIG_FEATURE_CHAT_IMPLICIT_CR=y -# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set -# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set -# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set -# CONFIG_FEATURE_CHAT_CLR_ABORT is not set -CONFIG_CHRT=y -CONFIG_CROND=y -# CONFIG_DEBUG_CROND_OPTION is not set -# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set -CONFIG_CRONTAB=y -CONFIG_DC=y -# CONFIG_DEVFSD is not set -# CONFIG_DEVFSD_MODLOAD is not set -# CONFIG_DEVFSD_FG_NP is not set -# CONFIG_DEVFSD_VERBOSE is not set -# CONFIG_FEATURE_DEVFS is not set -CONFIG_EJECT=y -CONFIG_FEATURE_EJECT_SCSI=y -CONFIG_FBSPLASH=y -CONFIG_INOTIFYD=y -CONFIG_LAST=y -CONFIG_FEATURE_LAST_SMALL=y -# CONFIG_FEATURE_LAST_FANCY is not set -CONFIG_LESS=y -CONFIG_FEATURE_LESS_MAXLINES=9999999 -CONFIG_FEATURE_LESS_BRACKETS=y -CONFIG_FEATURE_LESS_FLAGS=y -CONFIG_FEATURE_LESS_FLAGCS=y -CONFIG_FEATURE_LESS_MARKS=y -CONFIG_FEATURE_LESS_REGEXP=y -CONFIG_HDPARM=y -CONFIG_FEATURE_HDPARM_GET_IDENTITY=y -CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y -CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y -CONFIG_MAKEDEVS=y -# CONFIG_FEATURE_MAKEDEVS_LEAF is not set -CONFIG_FEATURE_MAKEDEVS_TABLE=y -# CONFIG_MAN is not set -# CONFIG_MICROCOM is not set -CONFIG_MOUNTPOINT=y -CONFIG_MT=y -CONFIG_RAIDAUTORUN=y -CONFIG_READAHEAD=y -CONFIG_RUNLEVEL=y -CONFIG_RX=y -CONFIG_SETSID=y -CONFIG_STRINGS=y -CONFIG_TASKSET=y -CONFIG_FEATURE_TASKSET_FANCY=y -CONFIG_TIME=y -CONFIG_TTYSIZE=y -CONFIG_WATCHDOG=y - -# -# Networking Utilities -# -CONFIG_FEATURE_IPV6=y -CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y -# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set -CONFIG_ARP=y -CONFIG_ARPING=y -CONFIG_BRCTL=y -# CONFIG_FEATURE_BRCTL_FANCY is not set -# CONFIG_FEATURE_BRCTL_SHOW is not set -CONFIG_DNSD=y -CONFIG_ETHER_WAKE=y -CONFIG_FAKEIDENTD=y -CONFIG_FTPGET=y -CONFIG_FTPPUT=y -CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y -CONFIG_HOSTNAME=y -# CONFIG_HTTPD is not set -# CONFIG_FEATURE_HTTPD_RANGES is not set -# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set -# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set -# CONFIG_FEATURE_HTTPD_SETUID is not set -# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set -# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set -# CONFIG_FEATURE_HTTPD_CGI is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set -# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set -# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set -# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set -# CONFIG_FEATURE_HTTPD_PROXY is not set -CONFIG_IFCONFIG=y -CONFIG_FEATURE_IFCONFIG_STATUS=y -CONFIG_FEATURE_IFCONFIG_SLIP=y -CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y -CONFIG_FEATURE_IFCONFIG_HW=y -CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y -CONFIG_IFENSLAVE=y -CONFIG_IFUPDOWN=y -CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" -CONFIG_FEATURE_IFUPDOWN_IP=y -CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y -# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set -CONFIG_FEATURE_IFUPDOWN_IPV4=y -CONFIG_FEATURE_IFUPDOWN_IPV6=y -CONFIG_FEATURE_IFUPDOWN_MAPPING=y -CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y -# CONFIG_INETD is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set -# CONFIG_FEATURE_INETD_RPC is not set -CONFIG_IP=y -CONFIG_FEATURE_IP_ADDRESS=y -CONFIG_FEATURE_IP_LINK=y -CONFIG_FEATURE_IP_ROUTE=y -CONFIG_FEATURE_IP_TUNNEL=y -CONFIG_FEATURE_IP_RULE=y -CONFIG_FEATURE_IP_SHORT_FORMS=y -# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set -CONFIG_IPADDR=y -CONFIG_IPLINK=y -CONFIG_IPROUTE=y -CONFIG_IPTUNNEL=y -CONFIG_IPRULE=y -CONFIG_IPCALC=y -CONFIG_FEATURE_IPCALC_FANCY=y -CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y -CONFIG_NAMEIF=y -# CONFIG_FEATURE_NAMEIF_EXTENDED is not set -CONFIG_NC=y -CONFIG_NC_SERVER=y -CONFIG_NC_EXTRA=y -CONFIG_NETSTAT=y -# CONFIG_FEATURE_NETSTAT_WIDE is not set -CONFIG_FEATURE_NETSTAT_PRG=y -CONFIG_NSLOOKUP=y -CONFIG_PING=y -CONFIG_PING6=y -CONFIG_FEATURE_FANCY_PING=y -CONFIG_PSCAN=y -CONFIG_ROUTE=y -# CONFIG_SENDMAIL is not set -# CONFIG_FETCHMAIL is not set -CONFIG_SLATTACH=y -CONFIG_TELNET=y -CONFIG_FEATURE_TELNET_TTYPE=y -CONFIG_FEATURE_TELNET_AUTOLOGIN=y -CONFIG_TELNETD=y -CONFIG_FEATURE_TELNETD_STANDALONE=y -CONFIG_TFTP=y -# CONFIG_TFTPD is not set -CONFIG_FEATURE_TFTP_GET=y -CONFIG_FEATURE_TFTP_PUT=y -CONFIG_FEATURE_TFTP_BLOCKSIZE=y -# CONFIG_DEBUG_TFTP is not set -CONFIG_TRACEROUTE=y -# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set -# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set -# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set -# CONFIG_APP_UDHCPD is not set -# CONFIG_APP_DHCPRELAY is not set -# CONFIG_APP_DUMPLEASES is not set -# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set -CONFIG_DHCPD_LEASES_FILE="" -# CONFIG_APP_UDHCPC is not set -# CONFIG_FEATURE_UDHCPC_ARPING is not set -# CONFIG_FEATURE_UDHCP_PORT is not set -# CONFIG_FEATURE_UDHCP_DEBUG is not set -# CONFIG_FEATURE_RFC3397 is not set -CONFIG_DHCPC_DEFAULT_SCRIPT="" -CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS= -CONFIG_VCONFIG=y -CONFIG_WGET=y -CONFIG_FEATURE_WGET_STATUSBAR=y -CONFIG_FEATURE_WGET_AUTHENTICATION=y -CONFIG_FEATURE_WGET_LONG_OPTIONS=y -CONFIG_ZCIP=y -CONFIG_TCPSVD=y -CONFIG_UDPSVD=y - -# -# Process Utilities -# -CONFIG_FREE=y -CONFIG_FUSER=y -CONFIG_KILL=y -CONFIG_KILLALL=y -CONFIG_KILLALL5=y -CONFIG_NMETER=y -CONFIG_PGREP=y -CONFIG_PIDOF=y -CONFIG_FEATURE_PIDOF_SINGLE=y -CONFIG_FEATURE_PIDOF_OMIT=y -CONFIG_PKILL=y -CONFIG_PS=y -CONFIG_FEATURE_PS_WIDE=y -CONFIG_FEATURE_PS_TIME=y -# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set -CONFIG_RENICE=y -CONFIG_BB_SYSCTL=y -CONFIG_TOP=y -CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y -CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y -CONFIG_FEATURE_TOP_DECIMALS=y -CONFIG_FEATURE_TOPMEM=y -CONFIG_UPTIME=y -CONFIG_WATCH=y - -# -# Shells -# -CONFIG_FEATURE_SH_IS_ASH=y -# CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_MSH is not set -# CONFIG_FEATURE_SH_IS_NONE is not set -CONFIG_ASH=y - -# -# Ash Shell Options -# -CONFIG_ASH_BASH_COMPAT=y -CONFIG_ASH_JOB_CONTROL=y -CONFIG_ASH_READ_NCHARS=y -CONFIG_ASH_READ_TIMEOUT=y -CONFIG_ASH_ALIAS=y -CONFIG_ASH_MATH_SUPPORT=y -CONFIG_ASH_MATH_SUPPORT_64=y -CONFIG_ASH_GETOPTS=y -CONFIG_ASH_BUILTIN_ECHO=y -CONFIG_ASH_BUILTIN_PRINTF=y -CONFIG_ASH_BUILTIN_TEST=y -CONFIG_ASH_CMDCMD=y -CONFIG_ASH_MAIL=y -CONFIG_ASH_OPTIMIZE_FOR_SIZE=y -CONFIG_ASH_RANDOM_SUPPORT=y -CONFIG_ASH_EXPAND_PRMT=y -# CONFIG_HUSH is not set -# CONFIG_HUSH_HELP is not set -# CONFIG_HUSH_INTERACTIVE is not set -# CONFIG_HUSH_JOB is not set -# CONFIG_HUSH_TICK is not set -# CONFIG_HUSH_IF is not set -# CONFIG_HUSH_LOOPS is not set -# CONFIG_HUSH_CASE is not set -# CONFIG_LASH is not set -# CONFIG_MSH is not set - -# -# Bourne Shell Options -# -CONFIG_FEATURE_SH_EXTRA_QUIET=y -# CONFIG_FEATURE_SH_STANDALONE is not set -# CONFIG_FEATURE_SH_NOFORK is not set -CONFIG_CTTYHACK=y - -# -# System Logging Utilities -# -CONFIG_SYSLOGD=y -CONFIG_FEATURE_ROTATE_LOGFILE=y -CONFIG_FEATURE_REMOTE_LOG=y -# CONFIG_FEATURE_SYSLOGD_DUP is not set -CONFIG_FEATURE_IPC_SYSLOG=y -CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16 -CONFIG_LOGREAD=y -CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y -CONFIG_KLOGD=y -CONFIG_LOGGER=y - -# -# Runit Utilities -# -CONFIG_RUNSV=y -CONFIG_RUNSVDIR=y -CONFIG_SV=y -CONFIG_SVLOGD=y -CONFIG_CHPST=y -CONFIG_SETUIDGID=y -CONFIG_ENVUIDGID=y -CONFIG_ENVDIR=y -CONFIG_SOFTLIMIT=y -# CONFIG_CHCON is not set -# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set -# CONFIG_GETENFORCE is not set -# CONFIG_GETSEBOOL is not set -# CONFIG_LOAD_POLICY is not set -# CONFIG_MATCHPATHCON is not set -# CONFIG_RESTORECON is not set -# CONFIG_RUNCON is not set -# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set -# CONFIG_SELINUXENABLED is not set -# CONFIG_SETENFORCE is not set -# CONFIG_SETFILES is not set -# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set -# CONFIG_SETSEBOOL is not set -# CONFIG_SESTATUS is not set - -# -# Print Utilities -# -# CONFIG_LPD is not set -CONFIG_LPR=y -# CONFIG_LPQ is not set diff --git a/source/a/mkinitrd/archive/busybox-dot-config.1.12.1 b/source/a/mkinitrd/archive/busybox-dot-config.1.12.1 deleted file mode 100644 index 5987e0503..000000000 --- a/source/a/mkinitrd/archive/busybox-dot-config.1.12.1 +++ /dev/null @@ -1,857 +0,0 @@ -# -# Automatically generated make config: don't edit -# Busybox version: 1.12.1 -# Fri Nov 7 10:20:30 2008 -# -CONFIG_HAVE_DOT_CONFIG=y - -# -# Busybox Settings -# - -# -# General Configuration -# -CONFIG_DESKTOP=y -# CONFIG_EXTRA_COMPAT is not set -# CONFIG_FEATURE_ASSUME_UNICODE is not set -CONFIG_FEATURE_BUFFERS_USE_MALLOC=y -# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set -# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set -CONFIG_SHOW_USAGE=y -CONFIG_FEATURE_VERBOSE_USAGE=y -CONFIG_FEATURE_COMPRESS_USAGE=y -CONFIG_FEATURE_INSTALLER=y -CONFIG_LOCALE_SUPPORT=y -CONFIG_GETOPT_LONG=y -CONFIG_FEATURE_DEVPTS=y -# CONFIG_FEATURE_CLEAN_UP is not set -CONFIG_FEATURE_PIDFILE=y -CONFIG_FEATURE_SUID=y -CONFIG_FEATURE_SUID_CONFIG=y -CONFIG_FEATURE_SUID_CONFIG_QUIET=y -# CONFIG_SELINUX is not set -# CONFIG_FEATURE_PREFER_APPLETS is not set -CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" -CONFIG_FEATURE_SYSLOG=y -CONFIG_FEATURE_HAVE_RPC=y - -# -# Build Options -# -CONFIG_STATIC=y -# CONFIG_PIE is not set -# CONFIG_NOMMU is not set -# CONFIG_BUILD_LIBBUSYBOX is not set -# CONFIG_FEATURE_INDIVIDUAL is not set -# CONFIG_FEATURE_SHARED_BUSYBOX is not set -CONFIG_LFS=y -CONFIG_CROSS_COMPILER_PREFIX="" - -# -# Debugging Options -# -# CONFIG_DEBUG is not set -# CONFIG_DEBUG_PESSIMIZE is not set -# CONFIG_WERROR is not set -CONFIG_NO_DEBUG_LIB=y -# CONFIG_DMALLOC is not set -# CONFIG_EFENCE is not set -CONFIG_INCLUDE_SUSv2=y -# CONFIG_PARSE is not set - -# -# Installation Options -# -CONFIG_INSTALL_NO_USR=y -CONFIG_INSTALL_APPLET_SYMLINKS=y -# CONFIG_INSTALL_APPLET_HARDLINKS is not set -# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set -# CONFIG_INSTALL_APPLET_DONT is not set -# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set -# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set -# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set -CONFIG_PREFIX="./_install" - -# -# Busybox Library Tuning -# -CONFIG_PASSWORD_MINLEN=6 -CONFIG_MD5_SIZE_VS_SPEED=2 -# CONFIG_FEATURE_FAST_TOP is not set -# CONFIG_FEATURE_ETC_NETWORKS is not set -CONFIG_FEATURE_EDITING=y -CONFIG_FEATURE_EDITING_MAX_LEN=1024 -CONFIG_FEATURE_EDITING_VI=y -CONFIG_FEATURE_EDITING_HISTORY=64 -# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set -CONFIG_FEATURE_TAB_COMPLETION=y -# CONFIG_FEATURE_USERNAME_COMPLETION is not set -CONFIG_FEATURE_EDITING_FANCY_PROMPT=y -CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y -CONFIG_FEATURE_COPYBUF_KB=4 -CONFIG_MONOTONIC_SYSCALL=y -CONFIG_IOCTL_HEX2STR_ERROR=y -# CONFIG_FEATURE_HWIB is not set - -# -# Applets -# - -# -# Archival Utilities -# -# CONFIG_FEATURE_SEAMLESS_LZMA is not set -CONFIG_FEATURE_SEAMLESS_BZ2=y -CONFIG_FEATURE_SEAMLESS_GZ=y -CONFIG_FEATURE_SEAMLESS_Z=y -CONFIG_AR=y -CONFIG_FEATURE_AR_LONG_FILENAMES=y -CONFIG_BUNZIP2=y -CONFIG_BZIP2=y -CONFIG_CPIO=y -CONFIG_FEATURE_CPIO_O=y -# CONFIG_DPKG is not set -# CONFIG_DPKG_DEB is not set -# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set -CONFIG_GUNZIP=y -CONFIG_GZIP=y -CONFIG_RPM2CPIO=y -# CONFIG_RPM is not set -CONFIG_TAR=y -CONFIG_FEATURE_TAR_CREATE=y -CONFIG_FEATURE_TAR_AUTODETECT=y -CONFIG_FEATURE_TAR_FROM=y -CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y -# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set -CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y -CONFIG_FEATURE_TAR_LONG_OPTIONS=y -CONFIG_FEATURE_TAR_UNAME_GNAME=y -CONFIG_UNCOMPRESS=y -CONFIG_UNLZMA=y -CONFIG_FEATURE_LZMA_FAST=y -CONFIG_UNZIP=y - -# -# Coreutils -# -CONFIG_BASENAME=y -CONFIG_CAL=y -CONFIG_CAT=y -CONFIG_CATV=y -CONFIG_CHGRP=y -CONFIG_CHMOD=y -CONFIG_CHOWN=y -CONFIG_CHROOT=y -CONFIG_CKSUM=y -CONFIG_COMM=y -CONFIG_CP=y -CONFIG_CUT=y -CONFIG_DATE=y -CONFIG_FEATURE_DATE_ISOFMT=y -CONFIG_DD=y -CONFIG_FEATURE_DD_SIGNAL_HANDLING=y -CONFIG_FEATURE_DD_IBS_OBS=y -CONFIG_DF=y -CONFIG_FEATURE_DF_INODE=y -CONFIG_DIRNAME=y -CONFIG_DOS2UNIX=y -CONFIG_UNIX2DOS=y -CONFIG_DU=y -CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y -CONFIG_ECHO=y -CONFIG_FEATURE_FANCY_ECHO=y -CONFIG_ENV=y -CONFIG_FEATURE_ENV_LONG_OPTIONS=y -CONFIG_EXPAND=y -CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y -CONFIG_EXPR=y -CONFIG_EXPR_MATH_SUPPORT_64=y -CONFIG_FALSE=y -CONFIG_FOLD=y -CONFIG_HEAD=y -CONFIG_FEATURE_FANCY_HEAD=y -CONFIG_HOSTID=y -CONFIG_ID=y -CONFIG_INSTALL=y -CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y -CONFIG_LENGTH=y -CONFIG_LN=y -CONFIG_LOGNAME=y -CONFIG_LS=y -CONFIG_FEATURE_LS_FILETYPES=y -CONFIG_FEATURE_LS_FOLLOWLINKS=y -CONFIG_FEATURE_LS_RECURSIVE=y -CONFIG_FEATURE_LS_SORTFILES=y -CONFIG_FEATURE_LS_TIMESTAMPS=y -CONFIG_FEATURE_LS_USERNAME=y -CONFIG_FEATURE_LS_COLOR=y -CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y -CONFIG_MD5SUM=y -CONFIG_MKDIR=y -CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y -CONFIG_MKFIFO=y -CONFIG_MKNOD=y -CONFIG_MV=y -CONFIG_FEATURE_MV_LONG_OPTIONS=y -CONFIG_NICE=y -CONFIG_NOHUP=y -CONFIG_OD=y -CONFIG_PRINTENV=y -CONFIG_PRINTF=y -CONFIG_PWD=y -CONFIG_READLINK=y -CONFIG_FEATURE_READLINK_FOLLOW=y -CONFIG_REALPATH=y -CONFIG_RM=y -CONFIG_RMDIR=y -# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set -CONFIG_SEQ=y -CONFIG_SHA1SUM=y -CONFIG_SLEEP=y -CONFIG_FEATURE_FANCY_SLEEP=y -# CONFIG_FEATURE_FLOAT_SLEEP is not set -CONFIG_SORT=y -CONFIG_FEATURE_SORT_BIG=y -CONFIG_SPLIT=y -CONFIG_FEATURE_SPLIT_FANCY=y -CONFIG_STAT=y -CONFIG_FEATURE_STAT_FORMAT=y -CONFIG_STTY=y -CONFIG_SUM=y -CONFIG_SYNC=y -CONFIG_TAC=y -CONFIG_TAIL=y -CONFIG_FEATURE_FANCY_TAIL=y -CONFIG_TEE=y -CONFIG_FEATURE_TEE_USE_BLOCK_IO=y -CONFIG_TEST=y -CONFIG_FEATURE_TEST_64=y -CONFIG_TOUCH=y -CONFIG_TR=y -CONFIG_FEATURE_TR_CLASSES=y -CONFIG_FEATURE_TR_EQUIV=y -CONFIG_TRUE=y -CONFIG_TTY=y -CONFIG_UNAME=y -CONFIG_UNEXPAND=y -CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y -CONFIG_UNIQ=y -CONFIG_USLEEP=y -CONFIG_UUDECODE=y -CONFIG_UUENCODE=y -CONFIG_WC=y -CONFIG_FEATURE_WC_LARGE=y -CONFIG_WHO=y -CONFIG_WHOAMI=y -CONFIG_YES=y - -# -# Common options for cp and mv -# -CONFIG_FEATURE_PRESERVE_HARDLINKS=y - -# -# Common options for ls, more and telnet -# -CONFIG_FEATURE_AUTOWIDTH=y - -# -# Common options for df, du, ls -# -CONFIG_FEATURE_HUMAN_READABLE=y - -# -# Common options for md5sum, sha1sum -# -CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y - -# -# Console Utilities -# -CONFIG_CHVT=y -CONFIG_CLEAR=y -CONFIG_DEALLOCVT=y -CONFIG_DUMPKMAP=y -CONFIG_KBD_MODE=y -CONFIG_LOADFONT=y -CONFIG_LOADKMAP=y -CONFIG_OPENVT=y -CONFIG_RESET=y -CONFIG_RESIZE=y -CONFIG_FEATURE_RESIZE_PRINT=y -CONFIG_SETCONSOLE=y -CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y -CONFIG_SETFONT=y -CONFIG_SETKEYCODES=y -CONFIG_SETLOGCONS=y -CONFIG_SHOWKEY=y - -# -# Debian Utilities -# -CONFIG_MKTEMP=y -CONFIG_PIPE_PROGRESS=y -CONFIG_RUN_PARTS=y -CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y -CONFIG_FEATURE_RUN_PARTS_FANCY=y -CONFIG_START_STOP_DAEMON=y -CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y -CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y -CONFIG_WHICH=y - -# -# Editors -# -CONFIG_AWK=y -CONFIG_FEATURE_AWK_MATH=y -CONFIG_CMP=y -CONFIG_DIFF=y -CONFIG_FEATURE_DIFF_BINARY=y -CONFIG_FEATURE_DIFF_DIR=y -CONFIG_FEATURE_DIFF_MINIMAL=y -CONFIG_ED=y -CONFIG_PATCH=y -CONFIG_SED=y -CONFIG_VI=y -CONFIG_FEATURE_VI_MAX_LEN=1024 -CONFIG_FEATURE_VI_8BIT=y -CONFIG_FEATURE_VI_COLON=y -CONFIG_FEATURE_VI_YANKMARK=y -CONFIG_FEATURE_VI_SEARCH=y -CONFIG_FEATURE_VI_USE_SIGNALS=y -CONFIG_FEATURE_VI_DOT_CMD=y -CONFIG_FEATURE_VI_READONLY=y -CONFIG_FEATURE_VI_SETOPTS=y -CONFIG_FEATURE_VI_SET=y -CONFIG_FEATURE_VI_WIN_RESIZE=y -CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y -CONFIG_FEATURE_ALLOW_EXEC=y - -# -# Finding Utilities -# -CONFIG_FIND=y -CONFIG_FEATURE_FIND_PRINT0=y -CONFIG_FEATURE_FIND_MTIME=y -CONFIG_FEATURE_FIND_MMIN=y -CONFIG_FEATURE_FIND_PERM=y -CONFIG_FEATURE_FIND_TYPE=y -CONFIG_FEATURE_FIND_XDEV=y -CONFIG_FEATURE_FIND_MAXDEPTH=y -CONFIG_FEATURE_FIND_NEWER=y -CONFIG_FEATURE_FIND_INUM=y -CONFIG_FEATURE_FIND_EXEC=y -CONFIG_FEATURE_FIND_USER=y -CONFIG_FEATURE_FIND_GROUP=y -CONFIG_FEATURE_FIND_NOT=y -CONFIG_FEATURE_FIND_DEPTH=y -CONFIG_FEATURE_FIND_PAREN=y -CONFIG_FEATURE_FIND_SIZE=y -CONFIG_FEATURE_FIND_PRUNE=y -# CONFIG_FEATURE_FIND_DELETE is not set -CONFIG_FEATURE_FIND_PATH=y -CONFIG_FEATURE_FIND_REGEX=y -# CONFIG_FEATURE_FIND_CONTEXT is not set -CONFIG_GREP=y -CONFIG_FEATURE_GREP_EGREP_ALIAS=y -CONFIG_FEATURE_GREP_FGREP_ALIAS=y -CONFIG_FEATURE_GREP_CONTEXT=y -CONFIG_XARGS=y -CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y -CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y -CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y -CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y - -# -# Init Utilities -# -CONFIG_INIT=y -# CONFIG_DEBUG_INIT is not set -CONFIG_FEATURE_USE_INITTAB=y -CONFIG_FEATURE_KILL_REMOVED=y -CONFIG_FEATURE_KILL_DELAY=10 -CONFIG_FEATURE_INIT_SCTTY=y -CONFIG_FEATURE_INIT_SYSLOG=y -CONFIG_FEATURE_EXTRA_QUIET=y -# CONFIG_FEATURE_INIT_COREDUMPS is not set -# CONFIG_FEATURE_INITRD is not set -CONFIG_HALT=y -CONFIG_MESG=y - -# -# Login/Password Management Utilities -# -CONFIG_FEATURE_SHADOWPASSWDS=y -# CONFIG_USE_BB_PWD_GRP is not set -# CONFIG_USE_BB_SHADOW is not set -CONFIG_USE_BB_CRYPT=y -CONFIG_ADDGROUP=y -CONFIG_FEATURE_ADDUSER_TO_GROUP=y -CONFIG_DELGROUP=y -CONFIG_FEATURE_DEL_USER_FROM_GROUP=y -CONFIG_FEATURE_CHECK_NAMES=y -CONFIG_ADDUSER=y -# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set -CONFIG_DELUSER=y -CONFIG_GETTY=y -CONFIG_FEATURE_UTMP=y -CONFIG_FEATURE_WTMP=y -CONFIG_LOGIN=y -# CONFIG_PAM is not set -CONFIG_LOGIN_SCRIPTS=y -CONFIG_FEATURE_NOLOGIN=y -# CONFIG_FEATURE_SECURETTY is not set -CONFIG_PASSWD=y -CONFIG_FEATURE_PASSWD_WEAK_CHECK=y -CONFIG_CRYPTPW=y -CONFIG_CHPASSWD=y -CONFIG_SU=y -CONFIG_FEATURE_SU_SYSLOG=y -CONFIG_FEATURE_SU_CHECKS_SHELLS=y -CONFIG_SULOGIN=y -CONFIG_VLOCK=y - -# -# Linux Ext2 FS Progs -# -CONFIG_CHATTR=y -CONFIG_FSCK=y -CONFIG_LSATTR=y - -# -# Linux Module Utilities -# -# CONFIG_MODPROBE_SMALL is not set -# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set -# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set -CONFIG_DEPMOD=y -# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set -CONFIG_FEATURE_DEPMOD_ALIAS=y -CONFIG_INSMOD=y -# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set -CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y -# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set -CONFIG_RMMOD=y -CONFIG_LSMOD=y -CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y -CONFIG_MODPROBE=y -CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y -CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y -CONFIG_FEATURE_MODPROBE_BLACKLIST=y - -# -# Options common to multiple modutils -# -CONFIG_FEATURE_CHECK_TAINTED_MODULE=y -CONFIG_FEATURE_2_4_MODULES=y -CONFIG_FEATURE_2_6_MODULES=y -CONFIG_DEFAULT_MODULES_DIR="/lib/modules" -CONFIG_DEFAULT_DEPMOD_FILE="modules.dep" -# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set - -# -# Linux System Utilities -# -CONFIG_DMESG=y -CONFIG_FEATURE_DMESG_PRETTY=y -CONFIG_FBSET=y -CONFIG_FEATURE_FBSET_FANCY=y -CONFIG_FEATURE_FBSET_READMODE=y -CONFIG_FDFLUSH=y -CONFIG_FDFORMAT=y -CONFIG_FDISK=y -CONFIG_FDISK_SUPPORT_LARGE_DISKS=y -CONFIG_FEATURE_FDISK_WRITABLE=y -# CONFIG_FEATURE_AIX_LABEL is not set -# CONFIG_FEATURE_SGI_LABEL is not set -# CONFIG_FEATURE_SUN_LABEL is not set -CONFIG_FEATURE_OSF_LABEL=y -CONFIG_FEATURE_FDISK_ADVANCED=y -CONFIG_FINDFS=y -CONFIG_FREERAMDISK=y -CONFIG_FSCK_MINIX=y -CONFIG_MKFS_MINIX=y - -# -# Minix filesystem support -# -CONFIG_FEATURE_MINIX2=y -CONFIG_GETOPT=y -CONFIG_HEXDUMP=y -CONFIG_FEATURE_HEXDUMP_REVERSE=y -CONFIG_HD=y -CONFIG_HWCLOCK=y -CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y -CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y -CONFIG_IPCRM=y -CONFIG_IPCS=y -CONFIG_LOSETUP=y -CONFIG_MDEV=y -CONFIG_FEATURE_MDEV_CONF=y -CONFIG_FEATURE_MDEV_RENAME=y -CONFIG_FEATURE_MDEV_RENAME_REGEXP=y -CONFIG_FEATURE_MDEV_EXEC=y -CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y -CONFIG_MKSWAP=y -CONFIG_FEATURE_MKSWAP_V0=y -CONFIG_MORE=y -CONFIG_FEATURE_USE_TERMIOS=y -CONFIG_VOLUMEID=y -CONFIG_FEATURE_VOLUMEID_EXT=y -CONFIG_FEATURE_VOLUMEID_REISERFS=y -CONFIG_FEATURE_VOLUMEID_FAT=y -CONFIG_FEATURE_VOLUMEID_HFS=y -CONFIG_FEATURE_VOLUMEID_JFS=y -CONFIG_FEATURE_VOLUMEID_XFS=y -CONFIG_FEATURE_VOLUMEID_NTFS=y -CONFIG_FEATURE_VOLUMEID_ISO9660=y -CONFIG_FEATURE_VOLUMEID_UDF=y -CONFIG_FEATURE_VOLUMEID_LUKS=y -CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y -CONFIG_FEATURE_VOLUMEID_CRAMFS=y -CONFIG_FEATURE_VOLUMEID_ROMFS=y -CONFIG_FEATURE_VOLUMEID_SYSV=y -# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set -CONFIG_FEATURE_VOLUMEID_LINUXRAID=y -CONFIG_MOUNT=y -CONFIG_FEATURE_MOUNT_FAKE=y -# CONFIG_FEATURE_MOUNT_VERBOSE is not set -CONFIG_FEATURE_MOUNT_HELPERS=y -CONFIG_FEATURE_MOUNT_LABEL=y -CONFIG_FEATURE_MOUNT_NFS=y -CONFIG_FEATURE_MOUNT_CIFS=y -CONFIG_FEATURE_MOUNT_FLAGS=y -CONFIG_FEATURE_MOUNT_FSTAB=y -CONFIG_PIVOT_ROOT=y -CONFIG_RDATE=y -CONFIG_RDEV=y -CONFIG_READPROFILE=y -CONFIG_RTCWAKE=y -CONFIG_SCRIPT=y -CONFIG_SETARCH=y -CONFIG_SWAPONOFF=y -CONFIG_FEATURE_SWAPON_PRI=y -CONFIG_SWITCH_ROOT=y -CONFIG_UMOUNT=y -CONFIG_FEATURE_UMOUNT_ALL=y - -# -# Common options for mount/umount -# -CONFIG_FEATURE_MOUNT_LOOP=y -CONFIG_FEATURE_MTAB_SUPPORT=y - -# -# Miscellaneous Utilities -# -CONFIG_ADJTIMEX=y -CONFIG_BBCONFIG=y -CONFIG_CHAT=y -CONFIG_FEATURE_CHAT_NOFAIL=y -# CONFIG_FEATURE_CHAT_TTY_HIFI is not set -CONFIG_FEATURE_CHAT_IMPLICIT_CR=y -# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set -# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set -# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set -# CONFIG_FEATURE_CHAT_CLR_ABORT is not set -CONFIG_CHRT=y -CONFIG_CROND=y -# CONFIG_DEBUG_CROND_OPTION is not set -# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set -CONFIG_CRONTAB=y -CONFIG_DC=y -# CONFIG_DEVFSD is not set -# CONFIG_DEVFSD_MODLOAD is not set -# CONFIG_DEVFSD_FG_NP is not set -# CONFIG_DEVFSD_VERBOSE is not set -# CONFIG_FEATURE_DEVFS is not set -CONFIG_EJECT=y -CONFIG_FEATURE_EJECT_SCSI=y -CONFIG_FBSPLASH=y -CONFIG_INOTIFYD=y -CONFIG_LAST=y -CONFIG_FEATURE_LAST_SMALL=y -# CONFIG_FEATURE_LAST_FANCY is not set -CONFIG_LESS=y -CONFIG_FEATURE_LESS_MAXLINES=9999999 -CONFIG_FEATURE_LESS_BRACKETS=y -CONFIG_FEATURE_LESS_FLAGS=y -CONFIG_FEATURE_LESS_FLAGCS=y -CONFIG_FEATURE_LESS_MARKS=y -CONFIG_FEATURE_LESS_REGEXP=y -CONFIG_HDPARM=y -CONFIG_FEATURE_HDPARM_GET_IDENTITY=y -CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y -CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y -CONFIG_MAKEDEVS=y -# CONFIG_FEATURE_MAKEDEVS_LEAF is not set -CONFIG_FEATURE_MAKEDEVS_TABLE=y -# CONFIG_MAN is not set -# CONFIG_MICROCOM is not set -CONFIG_MOUNTPOINT=y -CONFIG_MT=y -CONFIG_RAIDAUTORUN=y -CONFIG_READAHEAD=y -CONFIG_RUNLEVEL=y -CONFIG_RX=y -CONFIG_SETSID=y -CONFIG_STRINGS=y -CONFIG_TASKSET=y -CONFIG_FEATURE_TASKSET_FANCY=y -CONFIG_TIME=y -CONFIG_TTYSIZE=y -CONFIG_WATCHDOG=y - -# -# Networking Utilities -# -CONFIG_FEATURE_IPV6=y -CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y -# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set -CONFIG_ARP=y -CONFIG_ARPING=y -CONFIG_BRCTL=y -# CONFIG_FEATURE_BRCTL_FANCY is not set -# CONFIG_FEATURE_BRCTL_SHOW is not set -CONFIG_DNSD=y -CONFIG_ETHER_WAKE=y -CONFIG_FAKEIDENTD=y -CONFIG_FTPGET=y -CONFIG_FTPPUT=y -CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y -CONFIG_HOSTNAME=y -# CONFIG_HTTPD is not set -# CONFIG_FEATURE_HTTPD_RANGES is not set -# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set -# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set -# CONFIG_FEATURE_HTTPD_SETUID is not set -# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set -# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set -# CONFIG_FEATURE_HTTPD_CGI is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set -# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set -# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set -# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set -# CONFIG_FEATURE_HTTPD_PROXY is not set -CONFIG_IFCONFIG=y -CONFIG_FEATURE_IFCONFIG_STATUS=y -CONFIG_FEATURE_IFCONFIG_SLIP=y -CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y -CONFIG_FEATURE_IFCONFIG_HW=y -CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y -CONFIG_IFENSLAVE=y -CONFIG_IFUPDOWN=y -CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" -CONFIG_FEATURE_IFUPDOWN_IP=y -CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y -# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set -CONFIG_FEATURE_IFUPDOWN_IPV4=y -CONFIG_FEATURE_IFUPDOWN_IPV6=y -CONFIG_FEATURE_IFUPDOWN_MAPPING=y -CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y -# CONFIG_INETD is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set -# CONFIG_FEATURE_INETD_RPC is not set -CONFIG_IP=y -CONFIG_FEATURE_IP_ADDRESS=y -CONFIG_FEATURE_IP_LINK=y -CONFIG_FEATURE_IP_ROUTE=y -CONFIG_FEATURE_IP_TUNNEL=y -CONFIG_FEATURE_IP_RULE=y -CONFIG_FEATURE_IP_SHORT_FORMS=y -# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set -CONFIG_IPADDR=y -CONFIG_IPLINK=y -CONFIG_IPROUTE=y -CONFIG_IPTUNNEL=y -CONFIG_IPRULE=y -CONFIG_IPCALC=y -CONFIG_FEATURE_IPCALC_FANCY=y -CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y -CONFIG_NAMEIF=y -# CONFIG_FEATURE_NAMEIF_EXTENDED is not set -CONFIG_NC=y -CONFIG_NC_SERVER=y -CONFIG_NC_EXTRA=y -CONFIG_NETSTAT=y -# CONFIG_FEATURE_NETSTAT_WIDE is not set -CONFIG_FEATURE_NETSTAT_PRG=y -CONFIG_NSLOOKUP=y -CONFIG_PING=y -CONFIG_PING6=y -CONFIG_FEATURE_FANCY_PING=y -CONFIG_PSCAN=y -CONFIG_ROUTE=y -# CONFIG_SENDMAIL is not set -# CONFIG_FETCHMAIL is not set -CONFIG_SLATTACH=y -CONFIG_TELNET=y -CONFIG_FEATURE_TELNET_TTYPE=y -CONFIG_FEATURE_TELNET_AUTOLOGIN=y -CONFIG_TELNETD=y -CONFIG_FEATURE_TELNETD_STANDALONE=y -CONFIG_TFTP=y -# CONFIG_TFTPD is not set -CONFIG_FEATURE_TFTP_GET=y -CONFIG_FEATURE_TFTP_PUT=y -CONFIG_FEATURE_TFTP_BLOCKSIZE=y -# CONFIG_DEBUG_TFTP is not set -CONFIG_TRACEROUTE=y -# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set -# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set -# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set -# CONFIG_APP_UDHCPD is not set -# CONFIG_APP_DHCPRELAY is not set -# CONFIG_APP_DUMPLEASES is not set -# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set -CONFIG_DHCPD_LEASES_FILE="" -# CONFIG_APP_UDHCPC is not set -# CONFIG_FEATURE_UDHCPC_ARPING is not set -# CONFIG_FEATURE_UDHCP_PORT is not set -# CONFIG_FEATURE_UDHCP_DEBUG is not set -# CONFIG_FEATURE_RFC3397 is not set -CONFIG_DHCPC_DEFAULT_SCRIPT="" -CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS= -CONFIG_VCONFIG=y -CONFIG_WGET=y -CONFIG_FEATURE_WGET_STATUSBAR=y -CONFIG_FEATURE_WGET_AUTHENTICATION=y -CONFIG_FEATURE_WGET_LONG_OPTIONS=y -CONFIG_ZCIP=y -CONFIG_TCPSVD=y -CONFIG_UDPSVD=y - -# -# Process Utilities -# -CONFIG_FREE=y -CONFIG_FUSER=y -CONFIG_KILL=y -CONFIG_KILLALL=y -CONFIG_KILLALL5=y -CONFIG_NMETER=y -CONFIG_PGREP=y -CONFIG_PIDOF=y -CONFIG_FEATURE_PIDOF_SINGLE=y -CONFIG_FEATURE_PIDOF_OMIT=y -CONFIG_PKILL=y -CONFIG_PS=y -CONFIG_FEATURE_PS_WIDE=y -CONFIG_FEATURE_PS_TIME=y -# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set -CONFIG_RENICE=y -CONFIG_BB_SYSCTL=y -CONFIG_TOP=y -CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y -CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y -CONFIG_FEATURE_TOP_DECIMALS=y -CONFIG_FEATURE_TOPMEM=y -CONFIG_UPTIME=y -CONFIG_WATCH=y - -# -# Shells -# -CONFIG_FEATURE_SH_IS_ASH=y -# CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_MSH is not set -# CONFIG_FEATURE_SH_IS_NONE is not set -CONFIG_ASH=y - -# -# Ash Shell Options -# -CONFIG_ASH_BASH_COMPAT=y -CONFIG_ASH_JOB_CONTROL=y -CONFIG_ASH_READ_NCHARS=y -CONFIG_ASH_READ_TIMEOUT=y -CONFIG_ASH_ALIAS=y -CONFIG_ASH_MATH_SUPPORT=y -CONFIG_ASH_MATH_SUPPORT_64=y -CONFIG_ASH_GETOPTS=y -CONFIG_ASH_BUILTIN_ECHO=y -CONFIG_ASH_BUILTIN_PRINTF=y -CONFIG_ASH_BUILTIN_TEST=y -CONFIG_ASH_CMDCMD=y -CONFIG_ASH_MAIL=y -CONFIG_ASH_OPTIMIZE_FOR_SIZE=y -CONFIG_ASH_RANDOM_SUPPORT=y -CONFIG_ASH_EXPAND_PRMT=y -# CONFIG_HUSH is not set -# CONFIG_HUSH_HELP is not set -# CONFIG_HUSH_INTERACTIVE is not set -# CONFIG_HUSH_JOB is not set -# CONFIG_HUSH_TICK is not set -# CONFIG_HUSH_IF is not set -# CONFIG_HUSH_LOOPS is not set -# CONFIG_HUSH_CASE is not set -# CONFIG_LASH is not set -# CONFIG_MSH is not set - -# -# Bourne Shell Options -# -CONFIG_FEATURE_SH_EXTRA_QUIET=y -# CONFIG_FEATURE_SH_STANDALONE is not set -# CONFIG_FEATURE_SH_NOFORK is not set -CONFIG_CTTYHACK=y - -# -# System Logging Utilities -# -CONFIG_SYSLOGD=y -CONFIG_FEATURE_ROTATE_LOGFILE=y -CONFIG_FEATURE_REMOTE_LOG=y -# CONFIG_FEATURE_SYSLOGD_DUP is not set -CONFIG_FEATURE_IPC_SYSLOG=y -CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16 -CONFIG_LOGREAD=y -CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y -CONFIG_KLOGD=y -CONFIG_LOGGER=y - -# -# Runit Utilities -# -CONFIG_RUNSV=y -CONFIG_RUNSVDIR=y -CONFIG_SV=y -CONFIG_SVLOGD=y -CONFIG_CHPST=y -CONFIG_SETUIDGID=y -CONFIG_ENVUIDGID=y -CONFIG_ENVDIR=y -CONFIG_SOFTLIMIT=y -# CONFIG_CHCON is not set -# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set -# CONFIG_GETENFORCE is not set -# CONFIG_GETSEBOOL is not set -# CONFIG_LOAD_POLICY is not set -# CONFIG_MATCHPATHCON is not set -# CONFIG_RESTORECON is not set -# CONFIG_RUNCON is not set -# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set -# CONFIG_SELINUXENABLED is not set -# CONFIG_SETENFORCE is not set -# CONFIG_SETFILES is not set -# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set -# CONFIG_SETSEBOOL is not set -# CONFIG_SESTATUS is not set - -# -# Print Utilities -# -# CONFIG_LPD is not set -CONFIG_LPR=y -# CONFIG_LPQ is not set diff --git a/source/a/mkinitrd/archive/busybox-dot-config.1.7.2 b/source/a/mkinitrd/archive/busybox-dot-config.1.7.2 deleted file mode 100644 index 5b9c00b45..000000000 --- a/source/a/mkinitrd/archive/busybox-dot-config.1.7.2 +++ /dev/null @@ -1,753 +0,0 @@ -# -# Automatically generated make config: don't edit -# Busybox version: 1.7.2 -# Thu Oct 4 22:03:29 2007 -# -CONFIG_HAVE_DOT_CONFIG=y - -# -# Busybox Settings -# - -# -# General Configuration -# -CONFIG_NITPICK=y -CONFIG_DESKTOP=y -CONFIG_FEATURE_BUFFERS_USE_MALLOC=y -# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set -# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set -CONFIG_SHOW_USAGE=y -CONFIG_FEATURE_VERBOSE_USAGE=y -CONFIG_FEATURE_COMPRESS_USAGE=y -CONFIG_FEATURE_INSTALLER=y -CONFIG_LOCALE_SUPPORT=y -CONFIG_GETOPT_LONG=y -CONFIG_FEATURE_DEVPTS=y -# CONFIG_FEATURE_CLEAN_UP is not set -CONFIG_FEATURE_PIDFILE=y -CONFIG_FEATURE_SUID=y -CONFIG_FEATURE_SUID_CONFIG=y -CONFIG_FEATURE_SUID_CONFIG_QUIET=y -# CONFIG_SELINUX is not set -# CONFIG_FEATURE_PREFER_APPLETS is not set -CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" -CONFIG_FEATURE_SYSLOG=y -CONFIG_FEATURE_HAVE_RPC=y - -# -# Build Options -# -CONFIG_STATIC=y -# CONFIG_BUILD_LIBBUSYBOX is not set -# CONFIG_FEATURE_FULL_LIBBUSYBOX is not set -# CONFIG_FEATURE_SHARED_BUSYBOX is not set -CONFIG_LFS=y -CONFIG_BUILD_AT_ONCE=y - -# -# Debugging Options -# -# CONFIG_DEBUG is not set -# CONFIG_WERROR is not set -CONFIG_NO_DEBUG_LIB=y -# CONFIG_DMALLOC is not set -# CONFIG_EFENCE is not set -CONFIG_INCLUDE_SUSv2=y - -# -# Installation Options -# -CONFIG_INSTALL_NO_USR=y -CONFIG_INSTALL_APPLET_SYMLINKS=y -# CONFIG_INSTALL_APPLET_HARDLINKS is not set -# CONFIG_INSTALL_APPLET_DONT is not set -CONFIG_PREFIX="./_install" - -# -# Busybox Library Tuning -# -CONFIG_PASSWORD_MINLEN=6 -CONFIG_MD5_SIZE_VS_SPEED=2 -# CONFIG_FEATURE_FAST_TOP is not set -# CONFIG_FEATURE_ETC_NETWORKS is not set -CONFIG_FEATURE_EDITING=y -CONFIG_FEATURE_EDITING_MAX_LEN=1024 -CONFIG_FEATURE_EDITING_FANCY_KEYS=y -CONFIG_FEATURE_EDITING_VI=y -CONFIG_FEATURE_EDITING_HISTORY=64 -# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set -CONFIG_FEATURE_TAB_COMPLETION=y -# CONFIG_FEATURE_USERNAME_COMPLETION is not set -CONFIG_FEATURE_EDITING_FANCY_PROMPT=y -CONFIG_MONOTONIC_SYSCALL=y -CONFIG_IOCTL_HEX2STR_ERROR=y - -# -# Applets -# - -# -# Archival Utilities -# -CONFIG_AR=y -CONFIG_FEATURE_AR_LONG_FILENAMES=y -CONFIG_BUNZIP2=y -CONFIG_CPIO=y -# CONFIG_DPKG is not set -# CONFIG_DPKG_DEB is not set -# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set -CONFIG_GUNZIP=y -CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y -CONFIG_GZIP=y -CONFIG_RPM2CPIO=y -# CONFIG_RPM is not set -# CONFIG_FEATURE_RPM_BZ2 is not set -CONFIG_TAR=y -CONFIG_FEATURE_TAR_CREATE=y -CONFIG_FEATURE_TAR_BZIP2=y -CONFIG_FEATURE_TAR_LZMA=y -CONFIG_FEATURE_TAR_FROM=y -CONFIG_FEATURE_TAR_GZIP=y -CONFIG_FEATURE_TAR_COMPRESS=y -CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y -# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set -CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y -CONFIG_FEATURE_TAR_LONG_OPTIONS=y -CONFIG_UNCOMPRESS=y -CONFIG_UNLZMA=y -CONFIG_FEATURE_LZMA_FAST=y -CONFIG_UNZIP=y - -# -# Common options for cpio and tar -# -CONFIG_FEATURE_UNARCHIVE_TAPE=y -# CONFIG_FEATURE_DEB_TAR_GZ is not set -# CONFIG_FEATURE_DEB_TAR_BZ2 is not set -# CONFIG_FEATURE_DEB_TAR_LZMA is not set - -# -# Coreutils -# -CONFIG_BASENAME=y -CONFIG_CAL=y -CONFIG_CAT=y -CONFIG_CATV=y -CONFIG_CHGRP=y -CONFIG_CHMOD=y -CONFIG_CHOWN=y -CONFIG_CHROOT=y -CONFIG_CKSUM=y -CONFIG_COMM=y -CONFIG_CP=y -CONFIG_CUT=y -CONFIG_DATE=y -CONFIG_FEATURE_DATE_ISOFMT=y -CONFIG_DD=y -CONFIG_FEATURE_DD_SIGNAL_HANDLING=y -CONFIG_FEATURE_DD_IBS_OBS=y -CONFIG_DF=y -CONFIG_DIRNAME=y -CONFIG_DOS2UNIX=y -CONFIG_UNIX2DOS=y -CONFIG_DU=y -CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y -CONFIG_ECHO=y -CONFIG_FEATURE_FANCY_ECHO=y -CONFIG_ENV=y -CONFIG_FEATURE_ENV_LONG_OPTIONS=y -CONFIG_EXPAND=y -CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y -CONFIG_EXPR=y -CONFIG_EXPR_MATH_SUPPORT_64=y -CONFIG_FALSE=y -CONFIG_FOLD=y -CONFIG_HEAD=y -CONFIG_FEATURE_FANCY_HEAD=y -CONFIG_HOSTID=y -CONFIG_ID=y -CONFIG_INSTALL=y -CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y -CONFIG_LENGTH=y -CONFIG_LN=y -CONFIG_LOGNAME=y -CONFIG_LS=y -CONFIG_FEATURE_LS_FILETYPES=y -CONFIG_FEATURE_LS_FOLLOWLINKS=y -CONFIG_FEATURE_LS_RECURSIVE=y -CONFIG_FEATURE_LS_SORTFILES=y -CONFIG_FEATURE_LS_TIMESTAMPS=y -CONFIG_FEATURE_LS_USERNAME=y -CONFIG_FEATURE_LS_COLOR=y -CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y -CONFIG_MD5SUM=y -CONFIG_MKDIR=y -CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y -CONFIG_MKFIFO=y -CONFIG_MKNOD=y -CONFIG_MV=y -CONFIG_FEATURE_MV_LONG_OPTIONS=y -CONFIG_NICE=y -CONFIG_NOHUP=y -CONFIG_OD=y -CONFIG_PRINTENV=y -CONFIG_PRINTF=y -CONFIG_PWD=y -CONFIG_READLINK=y -CONFIG_FEATURE_READLINK_FOLLOW=y -CONFIG_REALPATH=y -CONFIG_RM=y -CONFIG_RMDIR=y -CONFIG_SEQ=y -CONFIG_SHA1SUM=y -CONFIG_SLEEP=y -CONFIG_FEATURE_FANCY_SLEEP=y -CONFIG_SORT=y -CONFIG_FEATURE_SORT_BIG=y -CONFIG_SPLIT=y -CONFIG_FEATURE_SPLIT_FANCY=y -CONFIG_STAT=y -CONFIG_FEATURE_STAT_FORMAT=y -CONFIG_STTY=y -CONFIG_SUM=y -CONFIG_SYNC=y -CONFIG_TAIL=y -CONFIG_FEATURE_FANCY_TAIL=y -CONFIG_TEE=y -CONFIG_FEATURE_TEE_USE_BLOCK_IO=y -CONFIG_TEST=y -CONFIG_FEATURE_TEST_64=y -CONFIG_TOUCH=y -CONFIG_TR=y -CONFIG_FEATURE_TR_CLASSES=y -CONFIG_FEATURE_TR_EQUIV=y -CONFIG_TRUE=y -CONFIG_TTY=y -CONFIG_UNAME=y -CONFIG_UNEXPAND=y -CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y -CONFIG_UNIQ=y -CONFIG_USLEEP=y -CONFIG_UUDECODE=y -CONFIG_UUENCODE=y -CONFIG_WC=y -CONFIG_FEATURE_WC_LARGE=y -CONFIG_WHO=y -CONFIG_WHOAMI=y -CONFIG_YES=y - -# -# Common options for cp and mv -# -CONFIG_FEATURE_PRESERVE_HARDLINKS=y - -# -# Common options for ls, more and telnet -# -CONFIG_FEATURE_AUTOWIDTH=y - -# -# Common options for df, du, ls -# -CONFIG_FEATURE_HUMAN_READABLE=y - -# -# Common options for md5sum, sha1sum -# -CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y - -# -# Console Utilities -# -CONFIG_CHVT=y -CONFIG_CLEAR=y -CONFIG_DEALLOCVT=y -CONFIG_DUMPKMAP=y -CONFIG_LOADFONT=y -CONFIG_LOADKMAP=y -CONFIG_OPENVT=y -CONFIG_RESET=y -CONFIG_RESIZE=y -CONFIG_FEATURE_RESIZE_PRINT=y -CONFIG_SETCONSOLE=y -CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y -CONFIG_SETKEYCODES=y -CONFIG_SETLOGCONS=y - -# -# Debian Utilities -# -CONFIG_MKTEMP=y -CONFIG_PIPE_PROGRESS=y -CONFIG_RUN_PARTS=y -CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y -CONFIG_FEATURE_RUN_PARTS_FANCY=y -CONFIG_START_STOP_DAEMON=y -CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y -CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y -CONFIG_WHICH=y - -# -# Editors -# -CONFIG_AWK=y -CONFIG_FEATURE_AWK_MATH=y -CONFIG_CMP=y -CONFIG_DIFF=y -CONFIG_FEATURE_DIFF_BINARY=y -CONFIG_FEATURE_DIFF_DIR=y -CONFIG_FEATURE_DIFF_MINIMAL=y -CONFIG_ED=y -CONFIG_PATCH=y -CONFIG_SED=y -CONFIG_VI=y -CONFIG_FEATURE_VI_MAX_LEN=1024 -CONFIG_FEATURE_VI_COLON=y -CONFIG_FEATURE_VI_YANKMARK=y -CONFIG_FEATURE_VI_SEARCH=y -CONFIG_FEATURE_VI_USE_SIGNALS=y -CONFIG_FEATURE_VI_DOT_CMD=y -CONFIG_FEATURE_VI_READONLY=y -CONFIG_FEATURE_VI_SETOPTS=y -CONFIG_FEATURE_VI_SET=y -CONFIG_FEATURE_VI_WIN_RESIZE=y -CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y -CONFIG_FEATURE_ALLOW_EXEC=y - -# -# Finding Utilities -# -CONFIG_FIND=y -CONFIG_FEATURE_FIND_PRINT0=y -CONFIG_FEATURE_FIND_MTIME=y -CONFIG_FEATURE_FIND_MMIN=y -CONFIG_FEATURE_FIND_PERM=y -CONFIG_FEATURE_FIND_TYPE=y -CONFIG_FEATURE_FIND_XDEV=y -CONFIG_FEATURE_FIND_MAXDEPTH=y -CONFIG_FEATURE_FIND_NEWER=y -CONFIG_FEATURE_FIND_INUM=y -CONFIG_FEATURE_FIND_EXEC=y -CONFIG_FEATURE_FIND_USER=y -CONFIG_FEATURE_FIND_GROUP=y -CONFIG_FEATURE_FIND_NOT=y -CONFIG_FEATURE_FIND_DEPTH=y -CONFIG_FEATURE_FIND_PAREN=y -CONFIG_FEATURE_FIND_SIZE=y -CONFIG_FEATURE_FIND_PRUNE=y -# CONFIG_FEATURE_FIND_DELETE is not set -CONFIG_FEATURE_FIND_PATH=y -CONFIG_FEATURE_FIND_REGEX=y -# CONFIG_FEATURE_FIND_CONTEXT is not set -CONFIG_GREP=y -CONFIG_FEATURE_GREP_EGREP_ALIAS=y -CONFIG_FEATURE_GREP_FGREP_ALIAS=y -CONFIG_FEATURE_GREP_CONTEXT=y -CONFIG_XARGS=y -CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y -CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y -CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y -CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y - -# -# Init Utilities -# -CONFIG_INIT=y -# CONFIG_DEBUG_INIT is not set -CONFIG_FEATURE_USE_INITTAB=y -CONFIG_FEATURE_INIT_SCTTY=y -CONFIG_FEATURE_INIT_SYSLOG=y -CONFIG_FEATURE_EXTRA_QUIET=y -# CONFIG_FEATURE_INIT_COREDUMPS is not set -# CONFIG_FEATURE_INITRD is not set -CONFIG_HALT=y -CONFIG_MESG=y - -# -# Login/Password Management Utilities -# -CONFIG_FEATURE_SHADOWPASSWDS=y -# CONFIG_USE_BB_SHADOW is not set -# CONFIG_USE_BB_PWD_GRP is not set -CONFIG_ADDGROUP=y -CONFIG_FEATURE_ADDUSER_TO_GROUP=y -CONFIG_DELGROUP=y -CONFIG_FEATURE_DEL_USER_FROM_GROUP=y -CONFIG_ADDUSER=y -CONFIG_DELUSER=y -CONFIG_GETTY=y -CONFIG_FEATURE_UTMP=y -CONFIG_FEATURE_WTMP=y -CONFIG_LOGIN=y -# CONFIG_PAM is not set -CONFIG_LOGIN_SCRIPTS=y -CONFIG_FEATURE_NOLOGIN=y -# CONFIG_FEATURE_SECURETTY is not set -CONFIG_PASSWD=y -CONFIG_FEATURE_PASSWD_WEAK_CHECK=y -CONFIG_CRYPTPW=y -CONFIG_CHPASSWD=y -CONFIG_SU=y -CONFIG_FEATURE_SU_SYSLOG=y -CONFIG_FEATURE_SU_CHECKS_SHELLS=y -CONFIG_SULOGIN=y -CONFIG_VLOCK=y - -# -# Linux Ext2 FS Progs -# -CONFIG_CHATTR=y -CONFIG_FSCK=y -CONFIG_LSATTR=y - -# -# Linux Module Utilities -# -CONFIG_INSMOD=y -# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set -CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y -# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set -CONFIG_RMMOD=y -CONFIG_LSMOD=y -CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y -CONFIG_MODPROBE=y -CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y -CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y - -# -# Options common to multiple modutils -# -CONFIG_FEATURE_CHECK_TAINTED_MODULE=y -CONFIG_FEATURE_2_4_MODULES=y -CONFIG_FEATURE_2_6_MODULES=y -# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set - -# -# Linux System Utilities -# -CONFIG_DMESG=y -CONFIG_FEATURE_DMESG_PRETTY=y -CONFIG_FBSET=y -CONFIG_FEATURE_FBSET_FANCY=y -CONFIG_FEATURE_FBSET_READMODE=y -CONFIG_FDFLUSH=y -CONFIG_FDFORMAT=y -CONFIG_FDISK=y -CONFIG_FDISK_SUPPORT_LARGE_DISKS=y -CONFIG_FEATURE_FDISK_WRITABLE=y -# CONFIG_FEATURE_AIX_LABEL is not set -# CONFIG_FEATURE_SGI_LABEL is not set -# CONFIG_FEATURE_SUN_LABEL is not set -CONFIG_FEATURE_OSF_LABEL=y -CONFIG_FEATURE_FDISK_ADVANCED=y -CONFIG_FREERAMDISK=y -CONFIG_FSCK_MINIX=y -CONFIG_MKFS_MINIX=y - -# -# Minix filesystem support -# -CONFIG_FEATURE_MINIX2=y -CONFIG_GETOPT=y -CONFIG_HEXDUMP=y -CONFIG_HWCLOCK=y -CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y -CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y -CONFIG_IPCRM=y -CONFIG_IPCS=y -CONFIG_LOSETUP=y -CONFIG_MDEV=y -CONFIG_FEATURE_MDEV_CONF=y -CONFIG_FEATURE_MDEV_EXEC=y -CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y -CONFIG_MKSWAP=y -CONFIG_FEATURE_MKSWAP_V0=y -CONFIG_MORE=y -CONFIG_FEATURE_USE_TERMIOS=y -CONFIG_MOUNT=y -CONFIG_FEATURE_MOUNT_NFS=y -CONFIG_FEATURE_MOUNT_CIFS=y -CONFIG_FEATURE_MOUNT_FLAGS=y -CONFIG_FEATURE_MOUNT_FSTAB=y -CONFIG_PIVOT_ROOT=y -CONFIG_RDATE=y -CONFIG_READPROFILE=y -CONFIG_SETARCH=y -CONFIG_SWAPONOFF=y -CONFIG_SWITCH_ROOT=y -CONFIG_UMOUNT=y -CONFIG_FEATURE_UMOUNT_ALL=y - -# -# Common options for mount/umount -# -CONFIG_FEATURE_MOUNT_LOOP=y -CONFIG_FEATURE_MTAB_SUPPORT=y - -# -# Miscellaneous Utilities -# -CONFIG_ADJTIMEX=y -CONFIG_BBCONFIG=y -CONFIG_CHRT=y -CONFIG_CROND=y -# CONFIG_DEBUG_CROND_OPTION is not set -# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set -CONFIG_CRONTAB=y -CONFIG_DC=y -# CONFIG_DEVFSD is not set -# CONFIG_DEVFSD_MODLOAD is not set -# CONFIG_DEVFSD_FG_NP is not set -# CONFIG_DEVFSD_VERBOSE is not set -# CONFIG_FEATURE_DEVFS is not set -CONFIG_EJECT=y -CONFIG_LAST=y -CONFIG_LESS=y -CONFIG_FEATURE_LESS_MAXLINES=9999999 -CONFIG_FEATURE_LESS_BRACKETS=y -CONFIG_FEATURE_LESS_FLAGS=y -CONFIG_FEATURE_LESS_FLAGCS=y -CONFIG_FEATURE_LESS_MARKS=y -CONFIG_FEATURE_LESS_REGEXP=y -CONFIG_HDPARM=y -CONFIG_FEATURE_HDPARM_GET_IDENTITY=y -CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y -CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y -CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y -CONFIG_MAKEDEVS=y -# CONFIG_FEATURE_MAKEDEVS_LEAF is not set -CONFIG_FEATURE_MAKEDEVS_TABLE=y -CONFIG_MOUNTPOINT=y -CONFIG_MT=y -CONFIG_RAIDAUTORUN=y -CONFIG_READAHEAD=y -CONFIG_RUNLEVEL=y -CONFIG_RX=y -CONFIG_STRINGS=y -CONFIG_SETSID=y -CONFIG_TASKSET=y -CONFIG_FEATURE_TASKSET_FANCY=y -CONFIG_TIME=y -CONFIG_TTYSIZE=y -CONFIG_WATCHDOG=y - -# -# Networking Utilities -# -CONFIG_FEATURE_IPV6=y -# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set -CONFIG_ARP=y -CONFIG_ARPING=y -CONFIG_DNSD=y -CONFIG_ETHER_WAKE=y -CONFIG_FAKEIDENTD=y -CONFIG_FTPGET=y -CONFIG_FTPPUT=y -CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y -CONFIG_HOSTNAME=y -# CONFIG_HTTPD is not set -# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set -# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set -# CONFIG_FEATURE_HTTPD_SETUID is not set -# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set -# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set -# CONFIG_FEATURE_HTTPD_CGI is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set -# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set -# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set -# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set -CONFIG_IFCONFIG=y -CONFIG_FEATURE_IFCONFIG_STATUS=y -CONFIG_FEATURE_IFCONFIG_SLIP=y -CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y -CONFIG_FEATURE_IFCONFIG_HW=y -CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y -CONFIG_IFUPDOWN=y -CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" -CONFIG_FEATURE_IFUPDOWN_IP=y -CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y -# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set -CONFIG_FEATURE_IFUPDOWN_IPV4=y -CONFIG_FEATURE_IFUPDOWN_IPV6=y -CONFIG_FEATURE_IFUPDOWN_MAPPING=y -CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y -# CONFIG_INETD is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set -# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set -# CONFIG_FEATURE_INETD_RPC is not set -CONFIG_IP=y -CONFIG_FEATURE_IP_ADDRESS=y -CONFIG_FEATURE_IP_LINK=y -CONFIG_FEATURE_IP_ROUTE=y -CONFIG_FEATURE_IP_TUNNEL=y -CONFIG_FEATURE_IP_RULE=y -CONFIG_FEATURE_IP_SHORT_FORMS=y -CONFIG_IPADDR=y -CONFIG_IPLINK=y -CONFIG_IPROUTE=y -CONFIG_IPTUNNEL=y -CONFIG_IPRULE=y -CONFIG_IPCALC=y -CONFIG_FEATURE_IPCALC_FANCY=y -CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y -CONFIG_NAMEIF=y -CONFIG_NC=y -CONFIG_NC_SERVER=y -CONFIG_NC_EXTRA=y -CONFIG_NETSTAT=y -# CONFIG_FEATURE_NETSTAT_WIDE is not set -CONFIG_NSLOOKUP=y -CONFIG_PING=y -CONFIG_PING6=y -CONFIG_PSCAN=y -CONFIG_FEATURE_FANCY_PING=y -CONFIG_ROUTE=y -CONFIG_SLATTACH=y -CONFIG_TELNET=y -CONFIG_FEATURE_TELNET_TTYPE=y -CONFIG_FEATURE_TELNET_AUTOLOGIN=y -CONFIG_TELNETD=y -CONFIG_FEATURE_TELNETD_STANDALONE=y -CONFIG_TFTP=y -CONFIG_FEATURE_TFTP_GET=y -CONFIG_FEATURE_TFTP_PUT=y -CONFIG_FEATURE_TFTP_BLOCKSIZE=y -# CONFIG_DEBUG_TFTP is not set -CONFIG_TRACEROUTE=y -# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set -# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set -# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set -# CONFIG_APP_UDHCPD is not set -# CONFIG_APP_DHCPRELAY is not set -# CONFIG_APP_DUMPLEASES is not set -# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set -# CONFIG_APP_UDHCPC is not set -# CONFIG_FEATURE_UDHCP_DEBUG is not set -# CONFIG_FEATURE_RFC3397 is not set -CONFIG_VCONFIG=y -CONFIG_WGET=y -CONFIG_FEATURE_WGET_STATUSBAR=y -CONFIG_FEATURE_WGET_AUTHENTICATION=y -CONFIG_FEATURE_WGET_LONG_OPTIONS=y -CONFIG_ZCIP=y - -# -# Process Utilities -# -CONFIG_FREE=y -CONFIG_FUSER=y -CONFIG_KILL=y -CONFIG_KILLALL=y -CONFIG_KILLALL5=y -CONFIG_NMETER=y -CONFIG_PIDOF=y -CONFIG_FEATURE_PIDOF_SINGLE=y -CONFIG_FEATURE_PIDOF_OMIT=y -CONFIG_PS=y -CONFIG_FEATURE_PS_WIDE=y -CONFIG_RENICE=y -CONFIG_BB_SYSCTL=y -CONFIG_TOP=y -CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y -CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y -CONFIG_FEATURE_TOP_DECIMALS=y -CONFIG_UPTIME=y -CONFIG_WATCH=y - -# -# Shells -# -CONFIG_FEATURE_SH_IS_ASH=y -# CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_LASH is not set -# CONFIG_FEATURE_SH_IS_MSH is not set -# CONFIG_FEATURE_SH_IS_NONE is not set -CONFIG_ASH=y - -# -# Ash Shell Options -# -CONFIG_ASH_JOB_CONTROL=y -CONFIG_ASH_READ_NCHARS=y -CONFIG_ASH_READ_TIMEOUT=y -CONFIG_ASH_ALIAS=y -CONFIG_ASH_MATH_SUPPORT=y -CONFIG_ASH_MATH_SUPPORT_64=y -CONFIG_ASH_GETOPTS=y -CONFIG_ASH_BUILTIN_ECHO=y -CONFIG_ASH_BUILTIN_TEST=y -CONFIG_ASH_CMDCMD=y -CONFIG_ASH_MAIL=y -CONFIG_ASH_OPTIMIZE_FOR_SIZE=y -CONFIG_ASH_RANDOM_SUPPORT=y -CONFIG_ASH_EXPAND_PRMT=y -# CONFIG_HUSH is not set -# CONFIG_HUSH_HELP is not set -# CONFIG_HUSH_INTERACTIVE is not set -# CONFIG_HUSH_JOB is not set -# CONFIG_HUSH_TICK is not set -# CONFIG_HUSH_IF is not set -# CONFIG_HUSH_LOOPS is not set -# CONFIG_LASH is not set -# CONFIG_MSH is not set - -# -# Bourne Shell Options -# -CONFIG_FEATURE_SH_EXTRA_QUIET=y -# CONFIG_FEATURE_SH_STANDALONE is not set -CONFIG_CTTYHACK=y - -# -# System Logging Utilities -# -CONFIG_SYSLOGD=y -CONFIG_FEATURE_ROTATE_LOGFILE=y -CONFIG_FEATURE_REMOTE_LOG=y -CONFIG_FEATURE_IPC_SYSLOG=y -CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16 -CONFIG_LOGREAD=y -CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y -CONFIG_KLOGD=y -CONFIG_LOGGER=y - -# -# Runit Utilities -# -CONFIG_RUNSV=y -CONFIG_RUNSVDIR=y -CONFIG_SV=y -CONFIG_SVLOGD=y -CONFIG_CHPST=y -CONFIG_SETUIDGID=y -CONFIG_ENVUIDGID=y -CONFIG_ENVDIR=y -CONFIG_SOFTLIMIT=y -# CONFIG_CHCON is not set -# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set -# CONFIG_GETENFORCE is not set -# CONFIG_GETSEBOOL is not set -# CONFIG_LOAD_POLICY is not set -# CONFIG_MATCHPATHCON is not set -# CONFIG_RESTORECON is not set -# CONFIG_RUNCON is not set -# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set -# CONFIG_SELINUXENABLED is not set -# CONFIG_SETENFORCE is not set -# CONFIG_SETFILES is not set -# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set - -# -# ipsvd utilities -# -CONFIG_TCPSVD=y -CONFIG_UDPSVD=y diff --git a/source/a/mkinitrd/busybox-1.12.1_inotify.diff b/source/a/mkinitrd/busybox-1.12.1_inotify.diff deleted file mode 100644 index 151d16ce9..000000000 --- a/source/a/mkinitrd/busybox-1.12.1_inotify.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- busybox-1.12.1.orig/miscutils/inotifyd.c 2008-11-07 01:39:21.000000000 +0000 -+++ busybox-1.12.1/miscutils/inotifyd.c 2008-11-07 01:37:05.000000000 +0000 -@@ -28,7 +28,7 @@ - */ - - #include "libbb.h" --#include <linux/inotify.h> -+#include <sys/inotify.h> - - static volatile smallint signalled; - diff --git a/source/a/mkinitrd/busybox-dot-config b/source/a/mkinitrd/busybox-dot-config index 5987e0503..65e298b5f 100644 --- a/source/a/mkinitrd/busybox-dot-config +++ b/source/a/mkinitrd/busybox-dot-config @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Busybox version: 1.12.1 -# Fri Nov 7 10:20:30 2008 +# Busybox version: 1.15.3 +# Thu Dec 17 17:50:16 2009 # CONFIG_HAVE_DOT_CONFIG=y @@ -14,7 +14,6 @@ CONFIG_HAVE_DOT_CONFIG=y # CONFIG_DESKTOP=y # CONFIG_EXTRA_COMPAT is not set -# CONFIG_FEATURE_ASSUME_UNICODE is not set CONFIG_FEATURE_BUFFERS_USE_MALLOC=y # CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set # CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set @@ -23,7 +22,9 @@ CONFIG_FEATURE_VERBOSE_USAGE=y CONFIG_FEATURE_COMPRESS_USAGE=y CONFIG_FEATURE_INSTALLER=y CONFIG_LOCALE_SUPPORT=y -CONFIG_GETOPT_LONG=y +# CONFIG_FEATURE_ASSUME_UNICODE is not set +# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set +CONFIG_LONG_OPTS=y CONFIG_FEATURE_DEVPTS=y # CONFIG_FEATURE_CLEAN_UP is not set CONFIG_FEATURE_PIDFILE=y @@ -39,7 +40,7 @@ CONFIG_FEATURE_HAVE_RPC=y # # Build Options # -CONFIG_STATIC=y +# CONFIG_STATIC is not set # CONFIG_PIE is not set # CONFIG_NOMMU is not set # CONFIG_BUILD_LIBBUSYBOX is not set @@ -47,6 +48,7 @@ CONFIG_STATIC=y # CONFIG_FEATURE_SHARED_BUSYBOX is not set CONFIG_LFS=y CONFIG_CROSS_COMPILER_PREFIX="" +CONFIG_EXTRA_CFLAGS="" # # Debugging Options @@ -58,7 +60,6 @@ CONFIG_NO_DEBUG_LIB=y # CONFIG_DMALLOC is not set # CONFIG_EFENCE is not set CONFIG_INCLUDE_SUSv2=y -# CONFIG_PARSE is not set # # Installation Options @@ -71,7 +72,7 @@ CONFIG_INSTALL_APPLET_SYMLINKS=y # CONFIG_INSTALL_SH_APPLET_SYMLINK is not set # CONFIG_INSTALL_SH_APPLET_HARDLINK is not set # CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set -CONFIG_PREFIX="./_install" +CONFIG_PREFIX="/tmp/package-mkinitrd/usr/share/mkinitrd/initrd-tree" # # Busybox Library Tuning @@ -88,6 +89,8 @@ CONFIG_FEATURE_EDITING_HISTORY=64 CONFIG_FEATURE_TAB_COMPLETION=y # CONFIG_FEATURE_USERNAME_COMPLETION is not set CONFIG_FEATURE_EDITING_FANCY_PROMPT=y +CONFIG_FEATURE_EDITING_ASK_TERMINAL=y +# CONFIG_FEATURE_NON_POSIX_CP is not set CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y CONFIG_FEATURE_COPYBUF_KB=4 CONFIG_MONOTONIC_SYSCALL=y @@ -111,11 +114,14 @@ CONFIG_BUNZIP2=y CONFIG_BZIP2=y CONFIG_CPIO=y CONFIG_FEATURE_CPIO_O=y +CONFIG_FEATURE_CPIO_P=y # CONFIG_DPKG is not set # CONFIG_DPKG_DEB is not set # CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set CONFIG_GUNZIP=y CONFIG_GZIP=y +CONFIG_LZOP=y +CONFIG_LZOP_COMPR_HIGH=y CONFIG_RPM2CPIO=y # CONFIG_RPM is not set CONFIG_TAR=y @@ -153,7 +159,7 @@ CONFIG_DD=y CONFIG_FEATURE_DD_SIGNAL_HANDLING=y CONFIG_FEATURE_DD_IBS_OBS=y CONFIG_DF=y -CONFIG_FEATURE_DF_INODE=y +CONFIG_FEATURE_DF_FANCY=y CONFIG_DIRNAME=y CONFIG_DOS2UNIX=y CONFIG_UNIX2DOS=y @@ -169,6 +175,7 @@ CONFIG_EXPR=y CONFIG_EXPR_MATH_SUPPORT_64=y CONFIG_FALSE=y CONFIG_FOLD=y +CONFIG_FSYNC=y CONFIG_HEAD=y CONFIG_FEATURE_FANCY_HEAD=y CONFIG_HOSTID=y @@ -208,6 +215,8 @@ CONFIG_RMDIR=y # CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set CONFIG_SEQ=y CONFIG_SHA1SUM=y +CONFIG_SHA256SUM=y +CONFIG_SHA512SUM=y CONFIG_SLEEP=y CONFIG_FEATURE_FANCY_SLEEP=y # CONFIG_FEATURE_FLOAT_SLEEP is not set @@ -283,6 +292,8 @@ CONFIG_FEATURE_RESIZE_PRINT=y CONFIG_SETCONSOLE=y CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y CONFIG_SETFONT=y +CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y +CONFIG_DEFAULT_SETFONT_DIR="/usr/share/kbd/consolefonts" CONFIG_SETKEYCODES=y CONFIG_SETLOGCONS=y CONFIG_SHOWKEY=y @@ -304,7 +315,7 @@ CONFIG_WHICH=y # Editors # CONFIG_AWK=y -CONFIG_FEATURE_AWK_MATH=y +CONFIG_FEATURE_AWK_LIBM=y CONFIG_CMP=y CONFIG_DIFF=y CONFIG_FEATURE_DIFF_BINARY=y @@ -367,7 +378,6 @@ CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y # Init Utilities # CONFIG_INIT=y -# CONFIG_DEBUG_INIT is not set CONFIG_FEATURE_USE_INITTAB=y CONFIG_FEATURE_KILL_REMOVED=y CONFIG_FEATURE_KILL_DELAY=10 @@ -377,6 +387,8 @@ CONFIG_FEATURE_EXTRA_QUIET=y # CONFIG_FEATURE_INIT_COREDUMPS is not set # CONFIG_FEATURE_INITRD is not set CONFIG_HALT=y +# CONFIG_FEATURE_CALL_TELINIT is not set +CONFIG_TELINIT_PATH="" CONFIG_MESG=y # @@ -386,13 +398,17 @@ CONFIG_FEATURE_SHADOWPASSWDS=y # CONFIG_USE_BB_PWD_GRP is not set # CONFIG_USE_BB_SHADOW is not set CONFIG_USE_BB_CRYPT=y +CONFIG_USE_BB_CRYPT_SHA=y CONFIG_ADDGROUP=y +CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y CONFIG_FEATURE_ADDUSER_TO_GROUP=y CONFIG_DELGROUP=y CONFIG_FEATURE_DEL_USER_FROM_GROUP=y CONFIG_FEATURE_CHECK_NAMES=y CONFIG_ADDUSER=y # CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set +CONFIG_FIRST_SYSTEM_ID=1000 +CONFIG_LAST_SYSTEM_ID=12000 CONFIG_DELUSER=y CONFIG_GETTY=y CONFIG_FEATURE_UTMP=y @@ -425,36 +441,35 @@ CONFIG_LSATTR=y # CONFIG_MODPROBE_SMALL is not set # CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set # CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set -CONFIG_DEPMOD=y -# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set -CONFIG_FEATURE_DEPMOD_ALIAS=y CONFIG_INSMOD=y -# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set -CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y -# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set CONFIG_RMMOD=y CONFIG_LSMOD=y CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y CONFIG_MODPROBE=y -CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y -CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y CONFIG_FEATURE_MODPROBE_BLACKLIST=y +CONFIG_DEPMOD=y # # Options common to multiple modutils # -CONFIG_FEATURE_CHECK_TAINTED_MODULE=y CONFIG_FEATURE_2_4_MODULES=y -CONFIG_FEATURE_2_6_MODULES=y +# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set +CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS=y +# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set +CONFIG_FEATURE_CHECK_TAINTED_MODULE=y +CONFIG_FEATURE_MODUTILS_ALIAS=y +CONFIG_FEATURE_MODUTILS_SYMBOLS=y CONFIG_DEFAULT_MODULES_DIR="/lib/modules" CONFIG_DEFAULT_DEPMOD_FILE="modules.dep" -# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set # # Linux System Utilities # +CONFIG_ACPID=y +CONFIG_FEATURE_ACPID_COMPAT=y +CONFIG_BLKID=y CONFIG_DMESG=y CONFIG_FEATURE_DMESG_PRETTY=y CONFIG_FBSET=y @@ -479,7 +494,9 @@ CONFIG_MKFS_MINIX=y # Minix filesystem support # CONFIG_FEATURE_MINIX2=y +CONFIG_MKFS_VFAT=y CONFIG_GETOPT=y +CONFIG_FEATURE_GETOPT_LONG=y CONFIG_HEXDUMP=y CONFIG_FEATURE_HEXDUMP_REVERSE=y CONFIG_HD=y @@ -496,7 +513,7 @@ CONFIG_FEATURE_MDEV_RENAME_REGEXP=y CONFIG_FEATURE_MDEV_EXEC=y CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y CONFIG_MKSWAP=y -CONFIG_FEATURE_MKSWAP_V0=y +CONFIG_FEATURE_MKSWAP_UUID=y CONFIG_MORE=y CONFIG_FEATURE_USE_TERMIOS=y CONFIG_VOLUMEID=y @@ -531,6 +548,7 @@ CONFIG_RDEV=y CONFIG_READPROFILE=y CONFIG_RTCWAKE=y CONFIG_SCRIPT=y +CONFIG_SCRIPTREPLAY=y CONFIG_SETARCH=y CONFIG_SWAPONOFF=y CONFIG_FEATURE_SWAPON_PRI=y @@ -549,6 +567,9 @@ CONFIG_FEATURE_MTAB_SUPPORT=y # CONFIG_ADJTIMEX=y CONFIG_BBCONFIG=y +CONFIG_BEEP=y +CONFIG_FEATURE_BEEP_FREQ=4000 +CONFIG_FEATURE_BEEP_LENGTH_MS=30 CONFIG_CHAT=y CONFIG_FEATURE_CHAT_NOFAIL=y # CONFIG_FEATURE_CHAT_TTY_HIFI is not set @@ -559,18 +580,25 @@ CONFIG_FEATURE_CHAT_IMPLICIT_CR=y # CONFIG_FEATURE_CHAT_CLR_ABORT is not set CONFIG_CHRT=y CONFIG_CROND=y -# CONFIG_DEBUG_CROND_OPTION is not set +CONFIG_FEATURE_CROND_D=y # CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set +CONFIG_FEATURE_CROND_DIR="/var/spool/cron" CONFIG_CRONTAB=y CONFIG_DC=y +CONFIG_FEATURE_DC_LIBM=y # CONFIG_DEVFSD is not set # CONFIG_DEVFSD_MODLOAD is not set # CONFIG_DEVFSD_FG_NP is not set # CONFIG_DEVFSD_VERBOSE is not set # CONFIG_FEATURE_DEVFS is not set +CONFIG_DEVMEM=y CONFIG_EJECT=y CONFIG_FEATURE_EJECT_SCSI=y CONFIG_FBSPLASH=y +CONFIG_FLASH_LOCK=y +CONFIG_FLASH_UNLOCK=y +CONFIG_FLASH_ERASEALL=y +CONFIG_IONICE=y CONFIG_INOTIFYD=y CONFIG_LAST=y CONFIG_FEATURE_LAST_SMALL=y @@ -579,9 +607,11 @@ CONFIG_LESS=y CONFIG_FEATURE_LESS_MAXLINES=9999999 CONFIG_FEATURE_LESS_BRACKETS=y CONFIG_FEATURE_LESS_FLAGS=y -CONFIG_FEATURE_LESS_FLAGCS=y CONFIG_FEATURE_LESS_MARKS=y CONFIG_FEATURE_LESS_REGEXP=y +CONFIG_FEATURE_LESS_WINCH=y +CONFIG_FEATURE_LESS_DASHCMD=y +CONFIG_FEATURE_LESS_LINENUMS=y CONFIG_HDPARM=y CONFIG_FEATURE_HDPARM_GET_IDENTITY=y CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y @@ -605,13 +635,16 @@ CONFIG_STRINGS=y CONFIG_TASKSET=y CONFIG_FEATURE_TASKSET_FANCY=y CONFIG_TIME=y +CONFIG_TIMEOUT=y CONFIG_TTYSIZE=y +CONFIG_VOLNAME=y CONFIG_WATCHDOG=y # # Networking Utilities # CONFIG_FEATURE_IPV6=y +CONFIG_FEATURE_UNIX_LOCAL=y CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y # CONFIG_VERBOSE_RESOLUTION_ERRORS is not set CONFIG_ARP=y @@ -622,6 +655,8 @@ CONFIG_BRCTL=y CONFIG_DNSD=y CONFIG_ETHER_WAKE=y CONFIG_FAKEIDENTD=y +CONFIG_FTPD=y +CONFIG_FEATURE_FTP_WRITE=y CONFIG_FTPGET=y CONFIG_FTPPUT=y CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y @@ -629,11 +664,9 @@ CONFIG_HOSTNAME=y # CONFIG_HTTPD is not set # CONFIG_FEATURE_HTTPD_RANGES is not set # CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set -# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set # CONFIG_FEATURE_HTTPD_SETUID is not set # CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set # CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set # CONFIG_FEATURE_HTTPD_CGI is not set # CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set # CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set @@ -647,6 +680,7 @@ CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y CONFIG_FEATURE_IFCONFIG_HW=y CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y CONFIG_IFENSLAVE=y +CONFIG_IFPLUGD=y CONFIG_IFUPDOWN=y CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" CONFIG_FEATURE_IFUPDOWN_IP=y @@ -693,8 +727,6 @@ CONFIG_PING6=y CONFIG_FEATURE_FANCY_PING=y CONFIG_PSCAN=y CONFIG_ROUTE=y -# CONFIG_SENDMAIL is not set -# CONFIG_FETCHMAIL is not set CONFIG_SLATTACH=y CONFIG_TELNET=y CONFIG_FEATURE_TELNET_TTYPE=y @@ -706,7 +738,7 @@ CONFIG_TFTP=y CONFIG_FEATURE_TFTP_GET=y CONFIG_FEATURE_TFTP_PUT=y CONFIG_FEATURE_TFTP_BLOCKSIZE=y -# CONFIG_DEBUG_TFTP is not set +CONFIG_TFTP_DEBUG=y CONFIG_TRACEROUTE=y # CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set # CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set @@ -719,10 +751,11 @@ CONFIG_DHCPD_LEASES_FILE="" # CONFIG_APP_UDHCPC is not set # CONFIG_FEATURE_UDHCPC_ARPING is not set # CONFIG_FEATURE_UDHCP_PORT is not set -# CONFIG_FEATURE_UDHCP_DEBUG is not set -# CONFIG_FEATURE_RFC3397 is not set -CONFIG_DHCPC_DEFAULT_SCRIPT="" -CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS= +CONFIG_UDHCP_DEBUG=0 +# CONFIG_FEATURE_UDHCP_RFC3397 is not set +CONFIG_UDHCPC_DEFAULT_SCRIPT="" +CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=0 +CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="" CONFIG_VCONFIG=y CONFIG_WGET=y CONFIG_FEATURE_WGET_STATUSBAR=y @@ -730,9 +763,29 @@ CONFIG_FEATURE_WGET_AUTHENTICATION=y CONFIG_FEATURE_WGET_LONG_OPTIONS=y CONFIG_ZCIP=y CONFIG_TCPSVD=y +CONFIG_TUNCTL=y +CONFIG_FEATURE_TUNCTL_UG=y CONFIG_UDPSVD=y # +# Print Utilities +# +# CONFIG_LPD is not set +CONFIG_LPR=y +# CONFIG_LPQ is not set + +# +# Mail Utilities +# +CONFIG_MAKEMIME=y +CONFIG_FEATURE_MIME_CHARSET="us-ascii" +CONFIG_POPMAILDIR=y +CONFIG_FEATURE_POPMAILDIR_DELIVERY=y +CONFIG_REFORMIME=y +CONFIG_FEATURE_REFORMIME_COMPAT=y +# CONFIG_SENDMAIL is not set + +# # Process Utilities # CONFIG_FREE=y @@ -749,36 +802,62 @@ CONFIG_PKILL=y CONFIG_PS=y CONFIG_FEATURE_PS_WIDE=y CONFIG_FEATURE_PS_TIME=y +CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS=y # CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set CONFIG_RENICE=y CONFIG_BB_SYSCTL=y CONFIG_TOP=y CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y +CONFIG_FEATURE_TOP_SMP_CPU=y CONFIG_FEATURE_TOP_DECIMALS=y +CONFIG_FEATURE_TOP_SMP_PROCESS=y CONFIG_FEATURE_TOPMEM=y CONFIG_UPTIME=y CONFIG_WATCH=y # +# Runit Utilities +# +CONFIG_RUNSV=y +CONFIG_RUNSVDIR=y +CONFIG_FEATURE_RUNSVDIR_LOG=y +CONFIG_SV=y +CONFIG_SV_DEFAULT_SERVICE_DIR="/var/service" +CONFIG_SVLOGD=y +CONFIG_CHPST=y +CONFIG_SETUIDGID=y +CONFIG_ENVUIDGID=y +CONFIG_ENVDIR=y +CONFIG_SOFTLIMIT=y +# CONFIG_CHCON is not set +# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set +# CONFIG_GETENFORCE is not set +# CONFIG_GETSEBOOL is not set +# CONFIG_LOAD_POLICY is not set +# CONFIG_MATCHPATHCON is not set +# CONFIG_RESTORECON is not set +# CONFIG_RUNCON is not set +# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set +# CONFIG_SELINUXENABLED is not set +# CONFIG_SETENFORCE is not set +# CONFIG_SETFILES is not set +# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set +# CONFIG_SETSEBOOL is not set +# CONFIG_SESTATUS is not set + +# # Shells # CONFIG_FEATURE_SH_IS_ASH=y # CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_MSH is not set # CONFIG_FEATURE_SH_IS_NONE is not set CONFIG_ASH=y - -# -# Ash Shell Options -# CONFIG_ASH_BASH_COMPAT=y CONFIG_ASH_JOB_CONTROL=y CONFIG_ASH_READ_NCHARS=y CONFIG_ASH_READ_TIMEOUT=y CONFIG_ASH_ALIAS=y -CONFIG_ASH_MATH_SUPPORT=y -CONFIG_ASH_MATH_SUPPORT_64=y CONFIG_ASH_GETOPTS=y CONFIG_ASH_BUILTIN_ECHO=y CONFIG_ASH_BUILTIN_PRINTF=y @@ -789,6 +868,7 @@ CONFIG_ASH_OPTIMIZE_FOR_SIZE=y CONFIG_ASH_RANDOM_SUPPORT=y CONFIG_ASH_EXPAND_PRMT=y # CONFIG_HUSH is not set +# CONFIG_HUSH_BASH_COMPAT is not set # CONFIG_HUSH_HELP is not set # CONFIG_HUSH_INTERACTIVE is not set # CONFIG_HUSH_JOB is not set @@ -796,12 +876,13 @@ CONFIG_ASH_EXPAND_PRMT=y # CONFIG_HUSH_IF is not set # CONFIG_HUSH_LOOPS is not set # CONFIG_HUSH_CASE is not set +# CONFIG_HUSH_FUNCTIONS is not set +# CONFIG_HUSH_LOCAL is not set +# CONFIG_HUSH_EXPORT_N is not set # CONFIG_LASH is not set # CONFIG_MSH is not set - -# -# Bourne Shell Options -# +CONFIG_SH_MATH_SUPPORT=y +CONFIG_SH_MATH_SUPPORT_64=y CONFIG_FEATURE_SH_EXTRA_QUIET=y # CONFIG_FEATURE_SH_STANDALONE is not set # CONFIG_FEATURE_SH_NOFORK is not set @@ -820,38 +901,3 @@ CONFIG_LOGREAD=y CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y CONFIG_KLOGD=y CONFIG_LOGGER=y - -# -# Runit Utilities -# -CONFIG_RUNSV=y -CONFIG_RUNSVDIR=y -CONFIG_SV=y -CONFIG_SVLOGD=y -CONFIG_CHPST=y -CONFIG_SETUIDGID=y -CONFIG_ENVUIDGID=y -CONFIG_ENVDIR=y -CONFIG_SOFTLIMIT=y -# CONFIG_CHCON is not set -# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set -# CONFIG_GETENFORCE is not set -# CONFIG_GETSEBOOL is not set -# CONFIG_LOAD_POLICY is not set -# CONFIG_MATCHPATHCON is not set -# CONFIG_RESTORECON is not set -# CONFIG_RUNCON is not set -# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set -# CONFIG_SELINUXENABLED is not set -# CONFIG_SETENFORCE is not set -# CONFIG_SETFILES is not set -# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set -# CONFIG_SETSEBOOL is not set -# CONFIG_SESTATUS is not set - -# -# Print Utilities -# -# CONFIG_LPD is not set -CONFIG_LPR=y -# CONFIG_LPQ is not set diff --git a/source/a/mkinitrd/init b/source/a/mkinitrd/init index 0559932e9..a6f1091e8 100755 --- a/source/a/mkinitrd/init +++ b/source/a/mkinitrd/init @@ -4,7 +4,7 @@ # This requires that your kernel supports initramfs!!! # # Copyright 2004 Slackware Linux, Inc., Concord, CA, USA -# Copyright 2007, 2008 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -33,95 +33,131 @@ # # Config files used by this script: # -# /rootdev Contains the name of the root device, such as: /dev/hda1 +# /rootdev Contains the name of the root device, such as: /dev/hda1 # -# /rootfs Contains the root filesystem type, such as: xfs +# /rootfs Contains the root filesystem type, such as: xfs # # /initrd-name Contains the name of the initrd file. # +# /resumedev Contains the name of the device to resume from hibernation. +# +# /luksdev Contains colon separated list of luks encrypted devices to +# be unlocked. +# +# /lukskey Contains the path to a LUKS key-file for automatic unlock +# Format: LABEL=<partition_label>:/path/to/file +# UUID=<partition_uuid>:/path/to/file +# +# /wait-for-root Contains a number - the init script will wait this amount +# of seconds before creating device nodes. +# +# /keymap Contains the name for a custom keyboard map +# # Optional: -# /load_kernel_modules A script that uses insmod to load the desired -# modules. If this file is not present, all the modules -# in /lib/modules/`uname -r`/ will be loaded in the usual -# sorted order. If you need to load the modules in a -# certain order, or if the modules need extra options, -# then use a load_kernel_modules script. -# -# There's an example in here. To actually use it, you'll -# need to make it executable: -# -# chmod 755 load_kernel_modules - -INITRD=`cat /initrd-name` -ROOTDEV=`cat /rootdev` -ROOTFS=`cat /rootfs` -LUKSDEV=`cat /luksdev` -RESUMEDEV=`cat /resumedev` -WAIT=`cat /wait-for-root` -KEYMAP=`cat /keymap` +# +# /load_kernel_modules +# A script that uses insmod to load the desired +# modules. If this file is not present, all the modules +# in /lib/modules/$(uname -r)/ will be loaded in the usual +# sorted order. If you need to load the modules in a +# certain order, or if the modules need extra options, +# then use a load_kernel_modules script. +# +# There's an example in here. To actually use it, you'll +# need to make it executable: +# +# chmod 755 load_kernel_modules + +INITRD=$(cat /initrd-name) +ROOTDEV=$(cat /rootdev) +ROOTFS=$(cat /rootfs) +LUKSDEV=$(cat /luksdev) +LUKSKEY=$(cat /lukskey) +RESUMEDEV=$(cat /resumedev) +WAIT=$(cat /wait-for-root) +KEYMAP=$(cat /keymap) +INIT=/sbin/init + +PATH="/sbin:/bin:/usr/sbin:/usr/bin" # Mount /proc and /sys: mount -n proc /proc -t proc mount -n sysfs /sys -t sysfs +if grep devtmpfs /proc/filesystems 1>/dev/null 2>/dev/null ; then + DEVTMPFS=1 + mount -n devtmpfs /dev -t devtmpfs +fi + # Parse command line -for ARG in `cat /proc/cmdline`; do +for ARG in $(cat /proc/cmdline); do case $ARG in - rescue) - RESCUE=1 - ;; - root=/dev/*) - ROOTDEV=`echo $ARG | cut -f2 -d=` + 0|1|2|3|4|5|6|S|s|single) + RUNLEVEL=$ARG ;; - rootfs=*) - ROOTFS=`echo $ARG | cut -f2 -d=` + init=*) + INIT=$(echo $ARG | cut -f2 -d=) ;; luksdev=/dev/*) - LUKSDEV=`echo $ARG | cut -f2 -d=` + LUKSDEV=$(echo $ARG | cut -f2 -d=) ;; - waitforroot=*) - WAIT=`echo $ARG | cut -f2 -d=` + lukskey=*) + LUKSKEY=$(echo $ARG | cut -f2- -d=) ;; - root=LABEL=*) - ROOTDEV=`echo $ARG | cut -f2- -d=` + rescue) + RESCUE=1 ;; resume=*) - RESUMEDEV=`echo $ARG | cut -f2 -d=` + RESUMEDEV=$(echo $ARG | cut -f2 -d=) ;; - 0|1|2|3|4|5|6) - RUNLEVEL=$ARG + root=/dev/*) + ROOTDEV=$(echo $ARG | cut -f2 -d=) + ;; + root=LABEL=*) + ROOTDEV=$(echo $ARG | cut -f2- -d=) + ;; + root=UUID=*) + ROOTDEV=$(echo $ARG | cut -f2- -d=) + ;; + rootfs=*) + ROOTFS=$(echo $ARG | cut -f2 -d=) + ;; + waitforroot=*) + WAIT=$(echo $ARG | cut -f2 -d=) ;; esac done # Load kernel modules: -if [ ! -d /lib/modules/`uname -r` ]; then - echo "No kernel modules found for Linux `uname -r`." +if [ ! -d /lib/modules/$(uname -r) ]; then + echo "No kernel modules found for Linux $(uname -r)." elif [ -x ./load_kernel_modules ]; then # use load_kernel_modules script: echo "${INITRD}: Loading kernel modules from initrd image:" . ./load_kernel_modules else # load modules (if any) in order: - if ls /lib/modules/`uname -r`/*.*o 1> /dev/null 2> /dev/null ; then + if ls /lib/modules/$(uname -r)/*.*o 1> /dev/null 2> /dev/null ; then echo "${INITRD}: Loading kernel modules from initrd image:" - for module in /lib/modules/`uname -r`/*.*o ; do - insmod $module + for module in /lib/modules/$(uname -r)/*.*o ; do + /sbin/insmod $module done unset module fi fi -# Sometimes the devices needs extra time to be available. -# root on USB are good example of that. +# Sometimes the devices need extra time to be available. +# A root filesystem on USB is a good example of that. sleep $WAIT # If udevd is available, use it to generate block devices # else use mdev to read sysfs and generate the needed devices if [ -x /sbin/udevd -a -x /sbin/udevadm ]; then /sbin/udevd --daemon - /sbin/udevadm trigger --subsystem-match=block + /sbin/udevadm control --property=STARTUP=1 + /sbin/udevadm trigger --subsystem-match=block --action=add /sbin/udevadm settle --timeout=10 + /sbin/udevadm control --property=STARTUP= else - mdev -s + [ "$DEVTMPFS" != "1" ] && mdev -s fi # Load a custom keyboard mapping: @@ -136,62 +172,106 @@ if [ "$RESCUE" = "" ]; then /sbin/mdadm -E -s >/etc/mdadm.conf /sbin/mdadm -A -s fi - - # Find root device if a label was given: - if echo $ROOTDEV | grep -q "LABEL=" ; then - ROOTDEV=`findfs $ROOTDEV` - fi - # Make encrypted root partition available: - # The useable device will be under /dev/mapper/ - # Three scenarios for the commandline exist: - # 1- ROOTDEV is on a LUKS volume, and LUKSDEV is a real block device - # 2- ROOTDEV is on a LVM volume, and LUKSDEV is a real block device - # 3- ROOTDEV is on a LUKS volume, and LUKSDEV is on a LVM volume - # Case (3) will have to wait until we initialize the LVM. - # Test if ROOTDEV is "/dev/someting" or just "something" - the first means - # ROOTDEV is on a LVM volume (scenario 2); we don't need to rewrite ROOTDEV. - # The second means that ROOTDEV is on a LUKS volume (scenario 1). - CRYPTDEV="" + # Unlock any encrypted partitions necessary to access the + # root filesystem, such as encrypted LVM Physical volumes, disk + # partitions or mdadm arrays. + # Unavailable devices such as LVM Logical Volumes will need to be + # deferred until they become available after the vgscan. + if [ -x /sbin/cryptsetup ]; then - # If we find a LUKS device now, it is on a real block device: - if /sbin/cryptsetup isLuks ${LUKSDEV} 1>/dev/null 2>/dev/null ; then - CRYPTDEV=$(basename $ROOTDEV) - echo "Unlocking LUKS crypt volume '${CRYPTDEV}' on device '$LUKSDEV':" - /sbin/cryptsetup luksOpen ${LUKSDEV} $CRYPTDEV </dev/systty >/dev/systty 2>&1 - if [ "$CRYPTDEV" == "$ROOTDEV" ]; then # scenario 1 - ROOTDEV="/dev/mapper/${CRYPTDEV}" + + # Determine if we have to use a LUKS keyfile: + if [ ! -z "$LUKSKEY" ]; then + mkdir /mountkey + KEYPART=$(echo $LUKSKEY |cut -f1 -d:) + LUKSPATH="/mountkey$(echo $LUKSKEY |cut -f2 -d:)" + # Catch possible mount failure: + if blkid -t TYPE=vfat $KEYPART 1>/dev/null 2>&1 ; then + MOUNTOPTS="-t vfat -o shortname=mixed" + else + MOUNTOPTS="-t auto" + fi + mount $MOUNTOPTS $(findfs $KEYPART) /mountkey 2>/dev/null + # Check if we can actually use this file: + if [ ! -f $LUKSPATH ]; then + LUKSKEY="" + else + echo ">>> Using LUKS key file: '$LUKSKEY'" + LUKSKEY="-d $LUKSPATH" fi fi + + LUKSLIST_DEFERRED="" + LUKSLIST=$(echo $LUKSDEV | tr -s ':' ' ') + for LUKSDEV in $LUKSLIST ; do + if /sbin/cryptsetup isLuks ${LUKSDEV} 1>/dev/null 2>/dev/null ; then + if echo $ROOTDEV | grep -q "LABEL=" || echo $ROOTDEV | grep -q "UUID=" ; then + CRYPTDEV="luks$(basename $LUKSDEV)" + elif [ "x$ROOTDEV" = "x$(basename $ROOTDEV)" ]; then + CRYPTDEV="$ROOTDEV" + else + CRYPTDEV="luks$(basename $LUKSDEV)" + fi + echo "Unlocking LUKS encrypted device '${LUKSDEV}' as luks mapped device '$CRYPTDEV':" + /sbin/cryptsetup ${LUKSKEY} luksOpen ${LUKSDEV} ${CRYPTDEV} </dev/tty0 >/dev/tty0 2>&1 + if [ "$ROOTDEV" = "$LUKSDEV" -o "$ROOTDEV" = "$CRYPTDEV" ] ; then + ROOTDEV="/dev/mapper/$CRYPTDEV" + fi + else + LUKSLIST_DEFERRED="${LUKSLIST_DEFERRED} ${LUKSDEV}" + fi + done fi # Initialize LVM: - if [ -x /sbin/vgscan ]; then - /sbin/vgscan --mknodes --ignorelockingfailure - sleep 10 + if [ -x /sbin/vgchange ]; then /sbin/vgchange -ay --ignorelockingfailure fi - # Make encrypted root partition available (scenario 3): - # We have to handle cases here where the LUKS volume is created on a LV - if [ -x /sbin/cryptsetup ]; then - if /sbin/cryptsetup isLuks ${LUKSDEV} 1>/dev/null 2>/dev/null ; then - # Only act if we could not open the LUKS device before (i.e. is on a LV): - if [ "x$CRYPTDEV" == "x" ]; then - echo "Unlocking LUKS crypt volume '${ROOTDEV}' on device '$LUKSDEV':" - /sbin/cryptsetup luksOpen ${LUKSDEV} $ROOTDEV </dev/systty >/dev/systty 2>&1 - ROOTDEV="/dev/mapper/${ROOTDEV}" + # Unlock any LUKS encrypted devices that were deferred above but have now + # become available due to the vgscan (i.e. filesystems on LVM Logical Volumes) + + if [ -x /sbin/cryptsetup -a -n "${LUKSLIST_DEFERRED}" ]; then + for LUKSDEV in ${LUKSLIST_DEFERRED} ; do + if /sbin/cryptsetup isLuks ${LUKSDEV} 1>/dev/null 2>/dev/null ; then + if echo $ROOTDEV | grep -q "LABEL=" || echo $ROOTDEV | grep -q "UUID=" ; then + CRYPTDEV="luks$(basename $LUKSDEV)" + elif [ "x$ROOTDEV" = "x$(basename $ROOTDEV)" ]; then + CRYPTDEV="$ROOTDEV" + else + CRYPTDEV="luks$(basename $LUKSDEV)" + fi + echo "Unlocking LUKS encrypted device '${LUKSDEV}' as luks mapped device '$CRYPTDEV':" + /sbin/cryptsetup ${LUKSKEY} luksOpen ${LUKSDEV} ${CRYPTDEV} </dev/tty0 >/dev/tty0 2>&1 + if [ "$ROOTDEV" = "$LUKSDEV" -o "$ROOTDEV" = "$CRYPTDEV" ] ; then + ROOTDEV="/dev/mapper/$CRYPTDEV" + fi + else + echo "LUKS device '${LUKSDEV}' unavailable for unlocking!" fi - fi + done fi + # Find root device if a label or UUID was given: + if echo $ROOTDEV | grep -q "LABEL=" || \ + echo $ROOTDEV | grep -q "UUID=" ; then + ROOTDEV=$(findfs $ROOTDEV) + fi + + # Clean up after LUKS unlock using a keyfile: + if grep -q mountkey /proc/mounts 2>/dev/null ; then + umount -l /mountkey + rmdir /mountkey 2>/dev/null + fi + # Resume state from swap if [ "$RESUMEDEV" != "" ]; then if ls -l $RESUMEDEV | grep -q "^l" ; then - RESUMEDEV=`ls -l $RESUMEDEV | awk '{ print $NF }'` + RESUMEDEV=$(ls -l $RESUMEDEV | awk '{ print $NF }') fi echo "Trying to resume from $RESUMEDEV" - RESMAJMIN=`ls -l $RESUMEDEV | tr , : | awk '{ print $5$6 }'` + RESMAJMIN=$(ls -l $RESUMEDEV | tr , : | awk '{ print $5$6 }') echo $RESMAJMIN > /sys/power/resume fi @@ -206,6 +286,7 @@ if [ "$RESCUE" = "" ]; then /bin/sh fi else + echo echo "RESCUE mode" echo echo " You can try to fix or rescue your system now. If you want" @@ -219,12 +300,13 @@ else /bin/sh fi -if ps axc | grep -q udevd ; then - killall udevd +if pgrep udevd >/dev/null ; then + pkill udevd fi unset ERR -umount /proc -umount /sys +mount -o move /proc /mnt/proc +mount -o move /sys /mnt/sys +[ "$DEVTMPFS" = "1" ] && mount -o move /dev /mnt/dev echo "${INITRD}: exiting" -exec switch_root /mnt /sbin/init $RUNLEVEL +exec switch_root /mnt $INIT $RUNLEVEL diff --git a/source/a/mkinitrd/mkinitrd b/source/a/mkinitrd/mkinitrd index 8f77725fe..4cd97296b 100644 --- a/source/a/mkinitrd/mkinitrd +++ b/source/a/mkinitrd/mkinitrd @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2004 Slackware Linux, Inc., Concord, CA, USA # Copyright 2004 Patrick J. Volkerding, Concord, CA, USA -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,24 +22,28 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified by Robby Workman <rworkman@slackware.com> 26 November 2007 -# to add support for mkinitrd.conf - No additional license terms added +# to add support for mkinitrd.conf - No additional license terms added # Modified by Alan Hicks <alan@slackware.com> 27 November 2007 to enable -# passing arguments to kernel modules - No additional license terms added -# volkerdi - feel free to remove these :) +# passing arguments to kernel modules - No additional license terms added +# volkerdi - feel free to remove these :) # Modified by Eric Hameleers <alien@slackware.com> 3 April 2008 -# to add support custom keymaps - No additional license terms added +# to add support custom keymaps - No additional license terms added # Modified by Patrick Volkerding <volkerdi@slackware.com> 17 Dec 2008 -# Added support to bail out if kernel modules are requested for a kernel -# version that is not installed (thanks to Eric Hameleers), be more -# verbose about showing modules added to the initrd (thanks to -# Ellington Santos), and if "mount" returns /dev/root as the root device, -# use readlink to resolve the device pointed to by the /dev/root -# symlink, changed modprobe to use --ignore-install to avoid catching -# custom "install" lines and causing /sbin/modprobe to be copied to the -# initrd (thanks to Ken Milmore). -# Of course, license terms remain unchanged. - -MKINITRD_VERSION=1.3.4 +# Added support to bail out if kernel modules are requested for a kernel +# version that is not installed (thanks to Eric Hameleers), be more +# verbose about showing modules added to the initrd (thanks to +# Ellington Santos), and if "mount" returns /dev/root as the root device, +# use readlink to resolve the device pointed to by the /dev/root +# symlink, changed modprobe to use --ignore-install to avoid catching +# custom "install" lines and causing /sbin/modprobe to be copied to the +# initrd (thanks to Ken Milmore). +# Of course, license terms remain unchanged. +# Modified by Eric Hameleers <alien@slackware.com> 3 March 2010 +# Add lukskey option (-K). Automatically add kernel modules listed in +# load-kernel-modules if that file is executable. +# Yada yada yada. + +MKINITRD_VERSION=1.4.5 print_usage() { cat << EOF @@ -70,22 +74,22 @@ initrd, and the script is easy to modify. Be creative. :-) -o Output image (default /boot/initrd.gz) -r Root partition device (must be used with -f) -s Initrd source tree (default /boot/initrd-tree/) + -u Include udev in the initrd -w Time to wait until all disks are detected - -C Use cryptsetup to unlock the underlying device of an - encrypted root filesystem (must be used with '-r' parameter). - Two scenarios are possible. (1) root filesystem was created on the - encrypted disk/LVM partition, example: - -C /dev/sda2 -r cryptroot - where /dev/sda2 is the encrypted partition and - the actual root device name in /etc/fstab is: - /dev/mapper/cryptroot - (2) the encrypted partition contains a LVM volume which holds the - root filesystem, example: - -C /dev/sda2 -r /dev/vg/root - where /dev/sda2 is the encrypted partition and - the actual root device name in /etc/fstab is: - /dev/vg/root + -C A colon (:) delimited list of luks encrypted block devices to be + unlocked by the initrd using cryptsetup. All devices that must + be unlocked in order to access the root filesystem must be + specified. (Use with '-r' parameter). -L Add support for LVM partitions + -K Use a USB key (fat-formatted) to unlock the root LUKS volume + The parameter value is filename of a keyfile, as well as the label + (or uuid) of the partition this file is on. This way, you can unlock + your computer automatically if you have a USB stick with your LUKS + key inserted at boot. A passphrase will still be asked if the LUKS + key can not be found. + For example, if your USB thumb drive has a FAT partition with label + "TRAVELSTICK" and the actual keyfile is called "/keys/alien.luks", + then you need to pass: -K LABEL=TRAVELSTICK:/keys/alien.luks -R Add support for RAID partitions -V Display version number @@ -93,10 +97,10 @@ A simple example: Build an initrd for a reiserfs root partition: mkinitrd -c -m reiserfs -Another example: Build an initrd image using Linux 2.6.29.3-smp kernel +Another example: Build an initrd image using Linux 2.6.29.6-smp kernel modules for a system with an ext3 root partition on /dev/hdb3: - mkinitrd -c -k 2.6.29.3-smp -m mbcache:jbd:ext3 -f ext3 -r /dev/hdb3 + mkinitrd -c -k 2.6.29.6-smp -m mbcache:jbd:ext3 -f ext3 -r /dev/hdb3 Note that if you are already logged in with /dev/hdb3 as your / partition, and it is running ext3, this command works just the same: @@ -151,11 +155,21 @@ build_initrd_image() { fi fi done + # Use the output image name written in the initrd-tree if present: + if [ ! -z "$(cat $SOURCE_TREE/initrd-name)" ]; then + OUTPUT_IMAGE=$(cat $SOURCE_TREE/initrd-name) + if [ "$OUTPUT_IMAGE" = "$(basename $OUTPUT_IMAGE)" ]; then + OUTPUT_IMAGE=/boot/$OUTPUT_IMAGE + fi + mkdir -p $(dirname $OUTPUT_IMAGE) + fi # Wrap the initrd as an initramfs image and move it into place: ( cd $SOURCE_TREE rm -f $OUTPUT_IMAGE find . | cpio -o -H newc | gzip -9c > $OUTPUT_IMAGE ) + echo "$OUTPUT_IMAGE created." + echo "Be sure to run lilo again if you use it." } badconf_file() { @@ -166,6 +180,44 @@ badconf_file() { exit 1 } + +unify_libs() { + awk '/=. \// { print $3 }' | sort -u +} + +copy_libs() { + # First copy the essential glibc files: + find /lib* -name "ld-*so*" -o -name "libnss_files*so*" -o -name "libnss_compat*so*" | xargs -I'{}' cp -P --parents '{}' $SOURCE_TREE/ + + # Then copy all remaining libs our initrd files link against: + COUNT=1 + PRFX=$(tempfile --prefix ldd-) + TMPFILE=${PRFX}${COUNT} + + find $SOURCE_TREE -type f -exec ldd {} 2>/dev/null \; | unify_libs > $TMPFILE + while [ "$COUNT" != "0" ]; do + COUNT=$((COUNT+1)) + for i in $(cat $TMPFILE) ; do + ldd $i 2>/dev/null + done | unify_libs > ${PRFX}${COUNT} + TMPFILE=${PRFX}${COUNT} + [ $(cat $TMPFILE | wc -l) -eq 0 ] && COUNT=0 + done + + for i in $(cat ${PRFX}* | sort -u) ; do + cp -P --parents ${i}* $SOURCE_TREE + done + + ( + cd $SOURCE_TREE + for i in $(find -L . -type l -exec readlink -m /{} \; 2>/dev/null ) ; do + cp -P --parents ${i} $SOURCE_TREE + done + ) + + rm ${PRFX}* +} + # If --help is given, print_usage and exit: if echo $* | grep -wq '\--help' ; then print_usage @@ -181,11 +233,13 @@ fi # Default values if these aren't previously set. # Might be set from config file or by -s and -o options too. SOURCE_TREE=${SOURCE_TREE:-/boot/initrd-tree} -OUTPUT_IMAGE=${OUTPUT_IMAGE:-/boot/initrd.gz} +OUTPUT_IMAGE=${OUTPUT_IMAGE:-""} KERNEL_VERSION=${KERNEL_VERSION:-"$(uname -r)"} # Default actions without options: if [ -z "$1" ]; then + # We need a sensible default for this special case: + OUTPUT_IMAGE=${OUTPUT_IMAGE:-/boot/initrd.gz} # If the output tree doesn't exist, create it and then exit: if [ ! -d $SOURCE_TREE ]; then echo "Nothing found at location $SOURCE_TREE, so we will create an" @@ -204,8 +258,6 @@ if [ -z "$1" ]; then # If the source tree does exist, the default is to build the initrd # image from it and then exit: build_initrd_image - echo "$OUTPUT_IMAGE created." - echo "Be sure to run lilo again if you use it." exit 0 fi fi # default no-option actions @@ -264,6 +316,10 @@ while [ ! -z "$1" ]; do SOURCE_TREE="$2" shift 2 ;; + -u) + UDEV=1 + shift + ;; -w) WAIT="$2" shift 2 @@ -273,6 +329,10 @@ while [ ! -z "$1" ]; do LUKSDEV="$2" shift 2 ;; + -K) + LUKSKEY="$2" + shift 2 + ;; -L) LVM=1 shift @@ -306,13 +366,13 @@ fi # If $ROOTDEV and $ROOTFS are not set, assume we want the # values for the currently mounted / # (unless we find that values are already set in the initrd-tree): -if [ -z "$ROOTDEV" -a -z "$(cat $SOURCE_TREE/rootdev 2> /dev/null)" ]; then +if [ -z "$ROOTDEV" -a -z "$(cat $SOURCE_TREE/rootdev 2>/dev/null)" ]; then ROOTDEV=$(mount | grep ' on / ' | cut -f 1 -d ' ') if [ "$ROOTDEV" = "/dev/root" ]; then # find real root device ROOTDEV="/dev/$(readlink /dev/root)" fi fi -if [ -z "$ROOTFS" -a -z "$(cat $SOURCE_TREE/rootfs 2> /dev/null)" ]; then +if [ -z "$ROOTFS" -a -z "$(cat $SOURCE_TREE/rootfs 2>/dev/null)" ]; then ROOTFS=$(mount | grep ' on / ' | cut -f 5 -d ' ') fi # If needed, write them in the initrd-tree: @@ -333,9 +393,12 @@ if [ ! -z "$WAIT" ]; then echo $WAIT > $SOURCE_TREE/wait-for-root fi -# Useful to know which initrd is running: -INITRD_NAME=$(basename $OUTPUT_IMAGE) -echo $INITRD_NAME > $SOURCE_TREE/initrd-name +# If no OUTPUT_IMAGE was specified, read it from the SOURCE_TREE if possible: +OUTPUT_IMAGE=${OUTPUT_IMAGE:-"$(cat $SOURCE_TREE/initrd-name)"} +# If we still have no value, apply the default: +OUTPUT_IMAGE=${OUTPUT_IMAGE:-"/boot/initrd.gz"} +# Finally, write the image name into the SOURCE_TREE: +echo "$OUTPUT_IMAGE" > $SOURCE_TREE/initrd-name # Fill /resumedev with the swap partition holding the hibernation image if [ ! -z "$RESUMEDEV" ]; then @@ -353,49 +416,73 @@ if [ ! -z "$LUKSDEV" ]; then CRYPT=1 fi +# If LUKSKEY was set in the config file, then give it a warm welcome: +if [ ! -z "$LUKSKEY" ]; then + # $SOURCE_TREE/wait-for-root may have been configured earlier in the script, + # but we require at least 5 seconds for the USB stick to settle + # after insertion : + if [ ! -s $SOURCE_TREE/wait-for-root ] || [ $(cat $SOURCE_TREE/wait-for-root) -lt 5 ]; then + echo 5 > $SOURCE_TREE/wait-for-root + fi + + # Several extra modules are needed to support a vfat formatted USB stick... + # assuming here we are using a western codepage. + # This possibly adds doublures, but we clean up the MODULE_LIST further down! + MODULE_LIST="${MODULE_LIST}:ehci-hcd:uhci-hcd:usb-storage:hid:usbhid:fat:nls_cp437:nls_iso8859-1:msdos:vfat" + + # Finally, write the lukskey to the initrd-tree: + echo $LUKSKEY > $SOURCE_TREE/lukskey +fi + # Include RAID support in initrd if [ ! -z "$RAID" ]; then if [ -r /sbin/mdadm ]; then mkdir -p $SOURCE_TREE/sbin cp /sbin/mdadm $SOURCE_TREE/sbin/mdadm - chmod 755 $SOURCE_TREE/sbin/mdadm + chmod 0755 $SOURCE_TREE/sbin/mdadm else echo "ERROR: mdadm binary is missing, RAID support not installed" fi fi +# Include udev in initrd +if [ ! -z "$UDEV" ]; then + cp /sbin/udev* $SOURCE_TREE/sbin/ + cp -a /lib/udev $SOURCE_TREE/lib/ +fi + # Include LVM support in initrd if [ ! -z "$LVM" ]; then - if [ -f /sbin/lvm.static ]; then + if [ -f /sbin/lvm ]; then mkdir -p $SOURCE_TREE/sbin - cp /sbin/lvm.static $SOURCE_TREE/sbin/lvm.static - cp /sbin/dmsetup.static $SOURCE_TREE/sbin/dmsetup.static + cp /sbin/lvm $SOURCE_TREE/sbin/lvm + cp /sbin/dmsetup $SOURCE_TREE/sbin/dmsetup + find /lib* -name "libdevmapper*so*" | xargs -I'{}' cp -P --parents '{}' $SOURCE_TREE/ ( cd $SOURCE_TREE/sbin - ln -s lvm.static vgchange 2>/dev/null - ln -s lvm.static vgscan 2>/dev/null ) + ln -s lvm vgchange 2>/dev/null + ln -s lvm vgscan 2>/dev/null ) if [ -z "${MODULE_LIST}" ] ; then MODULE_LIST="dm-mod" elif ! echo ${MODULE_LIST} | grep -q dm-mod ; then MODULE_LIST="$MODULE_LIST:dm-mod" fi else - echo "LVM static binary is missing, LVM support isn't installed" + echo "LVM binary is missing, LVM support isn't installed" fi fi # Include cryptsetup (LUKS) support in initrd if [ ! -z "$CRYPT" ]; then - if [ -e /sbin/cryptsetup.static ]; then + if [ -e /usr/sbin/cryptsetup ]; then mkdir -p $SOURCE_TREE/sbin - cp /sbin/cryptsetup.static $SOURCE_TREE/sbin/cryptsetup.static - ( cd $SOURCE_TREE/sbin - ln -s cryptsetup.static cryptsetup 2>/dev/null - ) - cat << EOF > $SOURCE_TREE/sbin/udevadm + cp /usr/sbin/cryptsetup $SOURCE_TREE/sbin/cryptsetup + if [ ! -e $SOURCE_TREE/sbin/udevadm ]; then + cat << EOF > $SOURCE_TREE/sbin/udevadm #!/bin/sh sleep 3 EOF - chmod 0755 $SOURCE_TREE/sbin/udevadm + chmod 0755 $SOURCE_TREE/sbin/udevadm + fi if [ -z "${MODULE_LIST}" ] ; then MODULE_LIST="dm-mod" @@ -405,7 +492,7 @@ EOF # Write the underlying luks device to the initrd-tree: echo $LUKSDEV > $SOURCE_TREE/luksdev else - echo "Cryptsetup static binary is missing, CRYPT support isn't installed" + echo "Cryptsetup binary is missing, CRYPT support isn't installed" fi fi @@ -414,7 +501,14 @@ if [ ! -d $SOURCE_TREE/lib/modules/$KERNEL_VERSION ]; then mkdir -p $SOURCE_TREE/lib/modules/$KERNEL_VERSION fi -# If a module list was given, copy the modules into place: +# If an executable $SOURCE_TREE/load_kernel_modules already exists, then +# we assume you will want to load the kernel modules mentioned in there. +# This means, you do not have to explicitly add those on the commandline: +if [ -x $SOURCE_TREE/load_kernel_modules ]; then + MODULE_LIST="${MODULE_LIST}:$(cat $SOURCE_TREE/load_kernel_modules |grep "^insmod" |rev |cut -d/ -f1 |rev |cut -d. -f1)" +fi + +# If the module list is not empty, copy the modules into place: if [ ! -z "$MODULE_LIST" ]; then if grep -q "#insmod /lib/modules/2.6.18.8-smp/reiserfs.ko" $SOURCE_TREE/load_kernel_modules ; then rm -f $SOURCE_TREE/load_kernel_modules @@ -426,6 +520,12 @@ if [ ! -z "$MODULE_LIST" ]; then echo >> $SOURCE_TREE/load_kernel_modules fi + # Sanitize the modules list first, before any further processing. + # The awk command eliminates doubles without changing the order: + MODULE_LIST=$(echo $MODULE_LIST |tr -s ':' '\n' |awk '!x[$0]++' |tr '\n' ' ') + MODULE_LIST=$(echo $MODULE_LIST | tr ' ' ':') + MODULE_LIST=$(echo ${MODULE_LIST%:}) # Weed out a trailing ':' + # Count number of modules # This INDEX number gives us an easy way to find individual # modules and their arguments, as well as tells us how many @@ -433,6 +533,8 @@ if [ ! -z "$MODULE_LIST" ]; then if ! echo $MODULE_LIST | grep ':' > /dev/null ; then # only 1 module specified INDEX=1 else + # Trim excess ':' which will screw this routine: + MODULE_LIST=$(echo $MODULE_LIST | tr -s ':') INDEX=1 while [ ! "$(echo "$MODULE_LIST" | cut -f $INDEX -d ':' )" = "" ]; do INDEX=$(expr $INDEX + 1) @@ -458,7 +560,7 @@ while [ $i -ne $INDEX ]; do fi # Get MODULE deps and prepare insmod lines - /sbin/modprobe --set-version $KERNEL_VERSION --show-depends --ignore-install $MODULE 2> /dev/null \ + /sbin/modprobe --set-version $KERNEL_VERSION --show-depends --ignore-install $MODULE 2>/dev/null \ | grep "^insmod " | cut -f 2 -d ' ' | while read SRCMOD; do if ! grep -q "$SRCMOD" $SOURCE_TREE/load_kernel_modules 2>/dev/null ; then @@ -477,10 +579,13 @@ while [ $i -ne $INDEX ]; do echo "$LINE" >> $SOURCE_TREE/load_kernel_modules fi - if cp -a --parents $SRCMOD $SOURCE_TREE 2> /dev/null; then - echo "OK: $SRCMOD added." - else - echo "WARNING: Could not find module \"$SRCMOD\"" + if [ ! -f ${SOURCE_TREE}${SRCMOD} ]; then + # We did not yet copy this module into the initrd-tree + if cp -a --parents $SRCMOD $SOURCE_TREE 2>/dev/null; then + echo "OK: $SRCMOD added." + else + echo "WARNING: Could not find module \"$SRCMOD\"" + fi fi done @@ -489,6 +594,9 @@ done fi +# Copy needed libraries +copy_libs + # And finally, build the initrd: build_initrd_image diff --git a/source/a/mkinitrd/mkinitrd.8 b/source/a/mkinitrd/mkinitrd.8 index 5fa957218..be4e9d42d 100644 --- a/source/a/mkinitrd/mkinitrd.8 +++ b/source/a/mkinitrd/mkinitrd.8 @@ -7,7 +7,7 @@ .ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP .el .TP "\\$1" .. -.TH MKINITRD 8 "04 March 2008" "Slackware Version 12.1" +.TH MKINITRD 8 "27 March 2010" "Slackware Version 13.1" .SH NAME mkinitrd \- create or rebuilt an initrd (initial ramdisk) using initramfs (simple cpio+gzip). .SH SYNOPSIS @@ -40,7 +40,16 @@ mkinitrd \- create or rebuilt an initrd (initial ramdisk) using initramfs (simpl .B \-s source_tree ] [ -.B \-C crypt_device +.B \-u +] +[ +.B \-w wait_time +] +[ +.B \-C device1:device2:device3... +] +[ +.B \-K luks_keyfile ] [ .B \-L @@ -117,29 +126,50 @@ together with the \-f option in order to be beneficial. .B \-s source tree The directory to use as the source for the initrd. (default: /boot/initrd-tree/) .TP +.B \-u +Include udev in the initrd. +.TP .B \-w The -w option specifies how long to wait in seconds before assuming that all the drives are spun up and ready to go. .TP -.B \-C -Use cryptsetup to enable the underlying device of an encrypted root partition. -Requires '-r' parameter. Two scenarios are possible. -.br -(1) root filesystem was created on the encrypted disk/LVM partition, example: +.B \-C device list +A colon (:) delimited list of luks encrypted block devices to be unlocked by +the initrd using cryptsetup. All devices that must be unlocked in order to +access the root filesystem must be specified. e.g. - -C /dev/sda2 -r cryptroot + -C /dev/sda2:/dev/sda3 -where /dev/sda2 is the encrypted partition and the actual root device name in /etc/fstab is: +Each unlocked device will be assigned an automatically generated luks device +name of the form luks<device> where '<device>' will be the basename of the +encrypted device. e.g. - /dev/mapper/cryptroot + /dev/mapper/lukssda2 -(2) the encrypted partition contains a LVM volume which holds the root filesystem, example: +As a convenience to users, where -r specifies one of the device names listed +on the -C option it will be automatically adjusted to use the correct luks +device name. i.e. - -C /dev/sda2 -r /dev/vg/root + "-C /dev/sda2 -r /dev/sda2" and + "-C /dev/sda2 -r /dev/mapper/lukssda2" -where /dev/sda2 is the encrypted partition and the actual root device name in /etc/fstab is: +are equivalent. +.br +(Use with '-r' option). +.TP +.B \-K luks_keyfile +When using cryptsetup to encrypt your partition, you can use a keyfile instead +of a passphrase to unlock the LUKS volume. The LUKSKEY variable holds the +filename of a keyfile, as well as the label (or uuid) of the partition this +file is on. This way, you can unlock your computer automatically if you have a +USB stick with your LUKS key inserted at boot. A passphrase will still be asked +if the LUKS key can not be found. +.br +For example, if your USB thumb drive has a FAT partition with label +"TRAVELSTICK" and the actual keyfile is called "/keys/alien.luks", then +you need to set: - /dev/vg/root + -K LABEL=TRAVELSTICK:/keys/alien.luks .TP .B \-L This option adds LVM support to the initrd, if the tools are @@ -156,10 +186,33 @@ A simple example: Build an initrd for a reiserfs root partition: mkinitrd -c -m reiserfs -Another example: Build an initrd image using Linux 2.6.24.5 kernel -modules for a system with an ext3 root partition on /dev/hdb3: +Another example: Build an initrd image using Linux 2.6.33.1 kernel +modules for a system with an ext3 root partition on /dev/sdb3: + + mkinitrd -c -k 2.6.33.1 -m ext3 -f ext3 -r /dev/sdb3 + +An example of a single encrypted partition setup: +.br +As a user convenience, the value for the "-r" option may also be specified as +"/dev/sda2" in this example: + + mkinitrd -c -k 2.6.33.1 \\ + -m ext4:ehci-hcd:uhci-hcd:usbhid \\ + -f ext4 -r /dev/mapper/lukssda2 \\ + -C /dev/sda2 \\ + -l uk + +Finally, A more complex example: +.br +This one is for a LVM Volume Group (rootvg) comprising of two LVM Physical +Volumes, each of which is on a LUKS encrypted partition that will need to be +unlocked before the root filesystem (/dev/rootvg/lvroot) can be accessed. - mkinitrd -c -k 2.6.24.5 -m ext3 -f ext3 -r /dev/hdb3 + mkinitrd -c -k 2.6.29.6 \\ + -m ext4:ehci-hcd:uhci-hcd:usbhid \\ + -f ext4 -r /dev/rootvg/lvroot \\ + -L -C /dev/sda2:/dev/sdb2 \\ + -l uk If run without options, mkinitrd will rebuild an initrd image using the contents of the $SOURCE_TREE directory, or, if that directory @@ -174,13 +227,16 @@ line to /etc/lilo.conf. Here's a section of lilo.conf that shows how to set this up: # Linux bootable partition config begins - image = /boot/vmlinuz-generic-2.6.24.5 + image = /boot/vmlinuz-generic-2.6.33.1 initrd = /boot/initrd.gz - root = /dev/hda6 - label = Linux26245 + root = /dev/sda3 + label = Linux26331 read-only # Linux bootable partition config ends +Note that the line "root = /dev/sda3" is not needed if the root device +has been configured in the initrd image. + Once you've created the initrd and editing /etc/lilo.conf, you will need to run 'lilo' to write out the changed boot block. The next time you reboot the initrd should be loaded along with the kernel. diff --git a/source/a/mkinitrd/mkinitrd.SlackBuild b/source/a/mkinitrd/mkinitrd.SlackBuild index 10e70b997..7beba6c63 100755 --- a/source/a/mkinitrd/mkinitrd.SlackBuild +++ b/source/a/mkinitrd/mkinitrd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,32 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.3.4 -BB=1.12.1 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-1.4.5} +BB=1.15.3 NUMJOBS=${NUMJOBS:--j7} -BUILD=${BUILD:-3} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-mkinitrd +# Write a warning to stdout if the mkinitrd script has a different version: +eval $( grep "^MKINITRD_VERSION=" $CWD/mkinitrd ) +if [ "$VERSION" != "$MKINITRD_VERSION" ]; then + echo "The version of this package ($VERSION) is not equal to the version of the mkinitrd script ($MKINITRD_VERSION)." + sleep 5 +fi + rm -rf $PKG mkdir -p $TMP $PKG cd $TMP @@ -41,7 +57,7 @@ cd busybox-$BB #zcat $CWD/busybox-${BB}.remove_warning.diff.gz | patch -p1 --verbose || exit 1 #zcat $CWD/busybox-${BB}.no-gc-sections.diff.gz | patch -p1 --verbose || exit 1 # Needed with 2.6.27 kernel: -zcat $CWD/busybox-1.12.1_inotify.diff.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/busybox-1.12.1_inotify.diff.gz | patch -p1 --verbose || exit 1 chown -R root:root . sed -e \ diff --git a/source/a/mkinitrd/mkinitrd.conf.5 b/source/a/mkinitrd/mkinitrd.conf.5 index 5890e2462..7b316d0f1 100644 --- a/source/a/mkinitrd/mkinitrd.conf.5 +++ b/source/a/mkinitrd/mkinitrd.conf.5 @@ -1,7 +1,7 @@ .\" mkinitrd.5 Robby Workman <rworkman@slackware.com> -.\" 25 November 2007 " +.\" 19 December 2009 " -.TH MKINITRD.CONF 5 "05 Februrary 2008" "Slackware 12.1" +.TH MKINITRD.CONF 5 "27 March 2010" "Slackware 13.1" .SH NAME .B mkinitrd.conf(5) .SH SYNOPSIS @@ -89,21 +89,44 @@ Example: MODULE_LIST="module1:module2 option=1:module3" .TP 5 .I LUKSDEV -When using cryptsetup with an encrypted root partition, use this variable to -define the *actual* device name of the encrypted root partition and define the -*mapped* device name as ROOTDEV. +Contains a colon (:) delimited list of luks encrypted block devices to be +unlocked by the initrd using cryptsetup. All devices that must be unlocked +in order to access the root filesystem must be specified. .br -For example, if your actual root device name in /etc/fstab is: -.br -.I /dev/mapper/cryptroot -on -.I /dev/sda2 +Example: LUKSDEV="/dev/sda2:/dev/sda3" + +Each unlocked device will be assigned an automatically generated luks device +name of the form luks<device> where '<device>' will be the basename of the +encrypted device. e.g. + + /dev/mapper/lukssda2 -Then you'll need to set: +As a convenience to users, if +.I ROOTDEV +(see below) specifies one of the device names listed in the +.I LUKSDEV +option, then it will be automatically adjusted to use the correct luks +device name. i.e. when specifying +.I "LUKSDEV=/dev/sda2" +then +.I "ROOTDEV=/dev/sda2" +and +.I "ROOTDEV=/dev/mapper/lukssda2" +are equivalent. +.TP 5 +.I LUKSKEY +When using cryptsetup to encrypt your partition, you can use a keyfile instead +of a passphrase to unlock the LUKS volume. The LUKSKEY variable holds the +filename of a keyfile, as well as the label (or uuid) of the partition this +file is on. This way, you can unlock your computer automatically if you have a +USB stick with your LUKS key inserted at boot. A passphrase will still be asked +if the LUKS key can not be found. .br -LUKSDEV="/dev/sda2" +For example, if your USB thumb drive has a FAT partition with label +"TRAVELSTICK" and the actual keyfile is called "/keys/alien.luks", then +you need to set: .br -ROOTDEV="cryptroot" +LUKSKEY="LABEL=TRAVELSTICK:/keys/alien.luks" .TP 5 .I ROOTDEV @@ -146,6 +169,12 @@ LVM="0" # Do not add LVM support to initrd LVM="1" # Add LVM support to initrd .TP 5 +.I UDEV +Use UDEV in the initrd. +.br +Example: UDEV="1" + +.TP 5 .I WAIT This defines the time to wait, in seconds, until all disks are detected. .br diff --git a/source/a/mkinitrd/mkinitrd.conf.sample b/source/a/mkinitrd/mkinitrd.conf.sample index 29e56f5f0..4838354b5 100644 --- a/source/a/mkinitrd/mkinitrd.conf.sample +++ b/source/a/mkinitrd/mkinitrd.conf.sample @@ -7,10 +7,12 @@ #KERNEL_VERSION="$(uname -r)" #KEYMAP="us" #MODULE_LIST="ext3" -#LUKSDEV="/dev/hda1" -#ROOTDEV="/dev/hda1" +#LUKSDEV="/dev/sda2" +#LUKSKEY="LABEL=TRAVELSTICK:/keys/alienbob.luks" +#ROOTDEV="/dev/sda1" #ROOTFS="ext3" -#RESUMEDEV="/dev/hda2" +#RESUMEDEV="/dev/sda2" #RAID="0" #LVM="0" +#UDEV="1" #WAIT="1" diff --git a/source/a/mkinitrd/mkinitrd_command_generator.sh b/source/a/mkinitrd/mkinitrd_command_generator.sh index d3cdfb731..b26d9109c 100644 --- a/source/a/mkinitrd/mkinitrd_command_generator.sh +++ b/source/a/mkinitrd/mkinitrd_command_generator.sh @@ -47,6 +47,7 @@ FSTAB=${FSTAB:-"/etc/fstab"} # so we can test with alternate fstab files SOURCE_TREE=${SOURCE_TREE:-"/boot/initrd-tree"} CLEAR_TREE=${CLEAR_TREE:-1} KEYMAP=${KEYMAP:-"us"} +UDEV=${UDEV:-0} WAIT=${WAIT:-1} # A basic explanation of the commandline parameters: @@ -532,6 +533,7 @@ configurations are optional and you can stick to the defaults." 11 72 3 \ "KEYMAP" "Select keyboard layout (default: US)" \ $([ $USING_LUKS = 1 ] && echo on || echo off) \ "RESUMEDEV" "Select device for 'suspend-to-disk' feature" off \ +"UDEV" "Use UDEV in the initrd for device configuration" off \ "WAIT" "Add delay to allow detection of slow disks at boot" off) if [ "$?" != "0" ]; then exit 1 @@ -702,6 +704,10 @@ through the whole list of choices." \ [ -n "$KEYMAP" ] && KEYMAP=$(basename $KEYMAP .map) fi + if echo $EXTRA | grep -q UDEV ; then + UDEV=1 + fi + if echo $EXTRA | grep -q RESUMEDEV ; then # Print information about swap partitions: FREERAM=$(free -k | grep "^Mem:" | tr -s ' ' | cut -d' ' -f2) @@ -772,6 +778,10 @@ if [ -n "$KEYMAP" -a "$KEYMAP" != "us" ]; then # Add non-us keyboard mapping: MKINIT="$MKINIT -l $KEYMAP" fi +if [ $UDEV -eq 1 ]; then + # Add UDEV support: + MKINIT="$MKINIT -u" +fi if [ -n "$WAIT" -a $WAIT -ne 1 ]; then # Add non-default wait time: MKINIT="$MKINIT -w $WAIT" @@ -815,6 +825,7 @@ elif [ "$EMIT" = "conf" ]; then RESUMEDEV="$RESUMEDEV" RAID="$USING_RAID" LVM="$USING_LVM" + UDEV="$UDEV" WAIT="$WAIT" EOT fi diff --git a/source/a/mkinitrd/mkinitrd_kernelcheck.diff b/source/a/mkinitrd/mkinitrd_kernelcheck.diff deleted file mode 100644 index e1302f54e..000000000 --- a/source/a/mkinitrd/mkinitrd_kernelcheck.diff +++ /dev/null @@ -1,15 +0,0 @@ ---- mkinitrd.orig 2008-11-30 15:35:58.000000000 +0100 -+++ mkinitrd 2008-12-11 11:16:37.000000000 +0100 -@@ -277,6 +277,12 @@ - esac - done - -+# If kernel modules are needed but the kernel version is absent, exit now: -+if [ ! -d /lib/modules/$KERNEL_VERSION ]; then -+ echo "No modules tree found for kernel \"$KERNEL_VERSION\"" -+ exit 1 -+fi -+ - # If clearing source tree was requested, do that first - if [ "$CLEAR_TREE" = "1" ]; then - clear_source_tree diff --git a/source/a/module-init-tools/doinst.sh b/source/a/module-init-tools/doinst.sh deleted file mode 100644 index 41ff1d753..000000000 --- a/source/a/module-init-tools/doinst.sh +++ /dev/null @@ -1,22 +0,0 @@ -config() { - NEW="$1" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} -config etc/modprobe.conf.new - -# Retain legacy behavior by tossing a symlink in /etc/modprobe.d/: -# Note that the plan is to eliminate /etc/modprobe.conf and -# /etc/modules.conf in the long run, so you may wish to remove the -# link and move your actual file into /etc/modprobe.d/ if you want -# to keep it instead of going with smaller chunks in there... -if [ -r etc/modprobe.conf ]; then - ( cd etc/modprobe.d ; ln -s ../modprobe.conf . 2> /dev/null ) -fi - diff --git a/source/a/module-init-tools/modprobe.favor.etc.modprobe.d.diff b/source/a/module-init-tools/modprobe.favor.etc.modprobe.d.diff deleted file mode 100644 index 1565d93a6..000000000 --- a/source/a/module-init-tools/modprobe.favor.etc.modprobe.d.diff +++ /dev/null @@ -1,27 +0,0 @@ -diff -Nur module-init-tools-3.6.old/doc/modprobe.conf.sgml module-init-tools-3.6.new/doc/modprobe.conf.sgml ---- module-init-tools-3.6.old/doc/modprobe.conf.sgml 2009-02-04 01:45:24.000000000 -0600 -+++ module-init-tools-3.6.new/doc/modprobe.conf.sgml 2009-02-08 01:42:05.097637263 -0600 -@@ -35,7 +35,9 @@ - <para>Because the <command>modprobe</command> command can add or - remove extra more than one module, due to module dependencies, - we need a method of specifying what options are to be used with -- those modules. <filename>/etc/modprobe.conf</filename> (or, if that does not exist, all files under the <filename>/etc/modprobe.d</filename> directory) specifies -+ those modules. All of the files under the <filename>/etc/modprobe.d/</filename> -+ directory are used, or if that directory does not exist, the -+ <filename>/etc/modprobe.conf</filename> file specifies - those options, as required. It can also be used to create - convenient aliases: alternate names for a module. Finally, it - can override the normal <command>modprobe</command> behavior -diff -Nur module-init-tools-3.6.old/modprobe.c module-init-tools-3.6.new/modprobe.c ---- module-init-tools-3.6.old/modprobe.c 2009-02-04 01:45:24.000000000 -0600 -+++ module-init-tools-3.6.new/modprobe.c 2009-02-08 01:42:05.099636402 -0600 -@@ -1366,8 +1366,8 @@ - - static const char *default_configs[] = - { -- "/etc/modprobe.conf", - "/etc/modprobe.d", -+ "/etc/modprobe.conf", - }; - - static void read_toplevel_config(const char *filename, diff --git a/source/a/module-init-tools/modprobe.ignore_some_suffixes.diff b/source/a/module-init-tools/modprobe.ignore_some_suffixes.diff index 24967f0b2..a65fba0ad 100644 --- a/source/a/module-init-tools/modprobe.ignore_some_suffixes.diff +++ b/source/a/module-init-tools/modprobe.ignore_some_suffixes.diff @@ -1,43 +1,41 @@ -diff -Nur module-init-tools-3.6.old/modprobe.c module-init-tools-3.6.new/modprobe.c ---- module-init-tools-3.6.old/modprobe.c 2009-02-04 01:45:24.000000000 -0600 -+++ module-init-tools-3.6.new/modprobe.c 2009-02-08 01:40:24.143637295 -0600 +diff -Nur module-init-tools-3.11.orig/modprobe.c module-init-tools-3.11.new/modprobe.c +--- module-init-tools-3.11.orig/modprobe.c 2009-10-15 04:59:28.000000000 -0500 ++++ module-init-tools-3.11.new/modprobe.c 2009-10-15 08:14:12.108359199 -0500 @@ -38,6 +38,7 @@ #include <asm/unistd.h> #include <sys/wait.h> #include <syslog.h> +#include <regex.h> - #define streq(a,b) (strcmp((a),(b)) == 0) - #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -@@ -1275,6 +1276,20 @@ - return 1; + #include "util.h" + #include "elfops.h" +@@ -861,6 +862,20 @@ + options, commands, aliases, blacklist); } +/* Let's exclude a few file extensions */ +static int valid_file_name(const char *filename) +{ -+ static regex_t *re = NULL; ++ static regex_t *re = NULL; + -+ if (!re) { -+ re = NOFAIL(malloc(sizeof(regex_t))); -+ if (regcomp(re, "(^(\\.|\\.\\.)|\\.(new|orig|bak)$)", -+ REG_EXTENDED|REG_NOSUB) != 0) -+ fatal("regcomp failed: %s\n", strerror(errno)); -+ } -+ return regexec(re, filename, 0, NULL, 0); ++ if (!re) { ++ re = NOFAIL(malloc(sizeof(regex_t))); ++ if (regcomp(re, "(^(\\.|\\.\\.)|\\.(new|orig|bak)$)", ++ REG_EXTENDED|REG_NOSUB) != 0) ++ fatal("regcomp failed: %s\n", strerror(errno)); ++ } ++ return regexec(re, filename, 0, NULL, 0); +} + - /* Simple format, ignore lines starting with #, one command per line. - Returns true or false. */ - static int read_config(const char *filename, -@@ -1294,7 +1309,10 @@ - if (dir) { - struct dirent *i; + static int parse_config_scan(const char *filename, + const char *name, + int dump_only, +@@ -887,6 +902,8 @@ while ((i = readdir(dir)) != NULL) { -+ /* Removed this line: - if (!streq(i->d_name,".") && !streq(i->d_name,"..") -+ and replaced with this one: */ -+ if (valid_file_name(i->d_name) - && config_filter(i->d_name)) { - char sub[strlen(filename) + 1 - + strlen(i->d_name) + 1]; + size_t len; + ++ if (!valid_file_name(i->d_name)) ++ continue; + if (i->d_name[0] == '.') + continue; + if (!config_filter(i->d_name)) diff --git a/source/a/module-init-tools/modprobe.no_sys_check.diff b/source/a/module-init-tools/modprobe.no_sys_check.diff deleted file mode 100644 index 90e9a7d19..000000000 --- a/source/a/module-init-tools/modprobe.no_sys_check.diff +++ /dev/null @@ -1,51 +0,0 @@ -http://bugs.gentoo.org/258442 - -From 1a55ee5297b883ea4b43cdf74ad890873ebe966c Mon Sep 17 00:00:00 2001 -From: Mike Frysinger <vapier@gentoo.org> -Date: Fri, 13 Feb 2009 02:21:10 -0500 -Subject: [PATCH] modprobe: remove pointless /sys requirement - -When modprobe was converted from parsing /proc to parsing /sys, it was not -a straight conversion. Instead, a "sanity" check was added early on where -modprobe would simply abort doing anything useful if /sys isn't mounted. -Unfortunately, this makes modprobe fairly unusable. Considering the -kernel itself can invoke modprobe before userspace gets a chance to start -the init process (and actually mount /sys), we end up with a chicken and -egg issue. Which gets even worse when the kernel keeps running modprobe -over and over and the boot output fills up with: -modprobe: FATAL: /sys is not mounted. -modprobe: FATAL: /sys is not mounted. -modprobe: FATAL: /sys is not mounted. -modprobe: FATAL: /sys is not mounted. -modprobe: FATAL: /sys is not mounted. -modprobe: FATAL: /sys is not mounted. - -Since modprobe itself is already written to handle the case where it -cannot figure out whether a given module is loaded (and so was able to run -perfectly fine without /proc being mounted), the check is wholly useless. - -Signed-off-by: Mike Frysinger <vapier@gentoo.org> ---- - modprobe.c | 5 ----- - 1 files changed, 0 insertions(+), 5 deletions(-) - -diff --git a/modprobe.c b/modprobe.c -index 022004c..110204b 100644 ---- a/modprobe.c -+++ b/modprobe.c -@@ -1522,11 +1522,6 @@ static void handle_module(const char *modname, - const char *cmdline_opts, - int flags) - { -- struct stat finfo; -- -- if (stat("/sys/module", &finfo) < 0) -- fatal("/sys is not mounted.\n"); -- - if (list_empty(todo_list)) { - const char *command; - --- -1.6.1.3 - - diff --git a/source/a/module-init-tools/modprobe.quit.whining.about.modprobe.conf.diff b/source/a/module-init-tools/modprobe.quit.whining.about.modprobe.conf.diff new file mode 100644 index 000000000..640ab3086 --- /dev/null +++ b/source/a/module-init-tools/modprobe.quit.whining.about.modprobe.conf.diff @@ -0,0 +1,15 @@ +--- ./modprobe.c.orig 2010-02-06 13:56:19.000000000 -0600 ++++ ./modprobe.c 2010-02-06 14:00:49.000000000 -0600 +@@ -971,10 +971,8 @@ + } + + /* deprecated config file */ +- if (parse_config_file("/etc/modprobe.conf", name, dump_only, removing, +- options, commands, aliases, blacklist) > 0) +- warn("Deprecated config file /etc/modprobe.conf, " +- "all config files belong into /etc/modprobe.d/.\n"); ++ parse_config_file("/etc/modprobe.conf", name, dump_only, removing, ++ options, commands, aliases, blacklist); + + /* default config */ + parse_config_scan("/etc/modprobe.d", name, dump_only, removing, diff --git a/source/a/module-init-tools/module-init-tools.SlackBuild b/source/a/module-init-tools/module-init-tools.SlackBuild index d69b43bc2..9b390d11a 100755 --- a/source/a/module-init-tools/module-init-tools.SlackBuild +++ b/source/a/module-init-tools/module-init-tools.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.6 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo module-init-tools-*.tar.?z* | cut -d - -f 4 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-module-init-tools @@ -36,7 +45,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf module-init-tools-$VERSION -tar xvf $CWD/module-init-tools-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/module-init-tools-$VERSION.tar.?z* || exit 1 cd module-init-tools-$VERSION || exit 1 chown -R root:root . find . \ @@ -45,20 +54,14 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Look for /etc/modprobe.d/ first rather than bailing on the idea if -# /etc/modprobe.conf exists. IMHO, this is a better default behavior -# because it allows /etc/modprobe.conf to remain behind if something -# still looks there, and allows a smoother transition towards using -# /etc/modprobe.d/ instead. -zcat $CWD/modprobe.favor.etc.modprobe.d.diff.gz | patch -p1 --verbose || exit 1 - # Exclude *.{old,new,bak} files (and a few others that obviously aren't # valid for this... Thanks to Marco d'Itri for the patch that it's based on -zcat $CWD/modprobe.ignore_some_suffixes.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/modprobe.ignore_some_suffixes.diff.gz | patch -p1 || exit 1 -# We get (pointless) errors in early stages of the boot if modprobe checks for -# a mounted /sys before it actually gets mounted: -zcat $CWD/modprobe.no_sys_check.diff.gz | patch -p1 --verbose || exit 1 +# Using modprobe.conf still works, so don't whine about it, +# especially since there's nothing in /etc/modprobe.conf +# except for comments explaining not to use it. +zcat $CWD/modprobe.quit.whining.about.modprobe.conf.diff.gz | patch -p1 || exit 1 # Using --bindir=/sbin to make lsmod go there too CFLAGS= \ @@ -73,49 +76,37 @@ CFLAGS= \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# We don't need this -rm -f $PKG/sbin/generate-modprobe.conf +# Create the config directory just in case +mkdir -p $PKG/etc/modprobe.d/ -# Links lsmod into /bin +# Link lsmod into /bin mkdir -p $PKG/bin ( cd $PKG/bin ; ln -sf /sbin/lsmod . ) -# Add manpage symlink for modprobe.d -( cd $PKG/usr/man/man5 - if [ -f modprobe.conf.5 -a ! -e modprobe.d.5 ]; then - ln -sf modprobe.conf.5 modprobe.d.5 - fi -) - # Compress manpages ( cd $PKG/usr/man find . -type f -exec gzip -9 {} \; for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/etc/modprobe.d/ -cat << EOF > $PKG/etc/modprobe.conf.new -# /etc/modprobe.conf (old location for Linux 2.6+ config) -# -# The use of this config file is deprecated. -# Instead, create files in the /etc/modprobe.d/ directory -# containing modprobe options. -# -# For more information, see "man modprobe.conf". -EOF - find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null mkdir -p $PKG/usr/doc/module-init-tools-$VERSION -# Most of these are out of date cp -a \ - AUTHORS CODING COPYING FAQ HACKING INSTALL NEWS README TODO \ + AUTHORS CODING COPYING FAQ README TODO \ $PKG/usr/doc/module-init-tools-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG /sbin/makepkg -l y -c n $TMP/module-init-tools-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/module-init-tools/slack-desc b/source/a/module-init-tools/slack-desc index 2f0ca3316..99d071b0e 100644 --- a/source/a/module-init-tools/slack-desc +++ b/source/a/module-init-tools/slack-desc @@ -5,7 +5,7 @@ # make exactly 11 lines for the formatting to be correct. It's also # customary to leave one space after the ':'. - |-----handy-ruler------------------------------------------------------| + |-----handy-ruler-------------------------------------------------------| module-init-tools: module-init-tools (kernel module utilities) module-init-tools: module-init-tools: Utilities to load and unload kernel modules. These are used on Linux diff --git a/source/a/ntfs-3g/10-ntfs-3g-policy.fdi b/source/a/ntfs-3g/10-ntfs-3g-policy.fdi index baaf81591..8b837d101 100644 --- a/source/a/ntfs-3g/10-ntfs-3g-policy.fdi +++ b/source/a/ntfs-3g/10-ntfs-3g-policy.fdi @@ -1,13 +1,38 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- Theoretically, this file should ship with ntfs-3g --> + <deviceinfo version="0.2"> <device> - <match key="volume.fstype" string="ntfs"> - <match key="@block.storage_device:storage.hotpluggable" bool="true"> - <merge key="volume.fstype" type="string">ntfs-3g</merge> - <merge key="volume.policy.mount_filesystem" type="string">ntfs-3g</merge> - <append key="volume.mount.valid_options" type="strlist">locale=</append> + <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux"> + <match key="volume.fstype" string="ntfs"> + + <!-- "Register" ntfs-3g as a valid alternative handler --> + <append key="volume.fstype.alternative" type="strlist">ntfs-3g</append> + + <!-- "Register" ntfs-3g as the preferred alternative handler --> + <merge key="volume.fstype.alternative.preferred" type="string">ntfs-3g</merge> + + <!-- Set valid mount options --> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">ro</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">sync</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">dirsync</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">noatime</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">nodiratime</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">noexec</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">quiet</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">remount</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">exec</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">locale=</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">uid=</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">gid=</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">umask=</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">dmask=</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">fmask=</append> + <append key="volume.mount.ntfs-3g.valid_options" type="strlist">utf8</append> + </match> </match> </device> </deviceinfo> + diff --git a/source/a/ntfs-3g/ntfs-3g.SlackBuild b/source/a/ntfs-3g/ntfs-3g.SlackBuild index 2883d4fbf..93612e0c3 100755 --- a/source/a/ntfs-3g/ntfs-3g.SlackBuild +++ b/source/a/ntfs-3g/ntfs-3g.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for ntfs-3g -# Copyright (c) 2008, Antonio Hernandez Blas <hba.nihilismus@gmail.com> +# Copyright 2008 Antonio Hernandez Blas <hba.nihilismus@gmail.com> # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -25,13 +25,22 @@ # Modified by Patrick Volkerding <volkerdi@slackware.com> # Modified by Eric Hameleers <alien@slackware.com> -PRGNAM=ntfs-3g -VERSION=${VERSION:-2009.4.4} -ARCH=${ARCH:-x86_64} +PKGNAM=ntfs-3g +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,18 +50,21 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -68,7 +80,7 @@ CXXFLAGS="$SLKCFLAGS" \ --mandir=/usr/man \ --bindir=/bin \ --sbindir=/sbin \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --with-fuse=internal \ --disable-ldconfig \ --enable-static=no \ @@ -78,7 +90,8 @@ CXXFLAGS="$SLKCFLAGS" \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Add the HAL fdi file so that automount uses "ntfs-3g" as filesystem type +# Add the HAL fdi file so that automount uses ntfs-3g for mounting +# This should work with the "volume.fstype.alternative.*" in hal-0.5.12+ mkdir -p $PKG/usr/share/hal/fdi/policy/10osvendor cat $CWD/10-ntfs-3g-policy.fdi \ > $PKG/usr/share/hal/fdi/policy/10osvendor/10-ntfs-3g-policy.fdi @@ -92,14 +105,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ ) rm -rf $PKG/usr/share/doc -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* CREDITS INSTALL NEWS README* \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/pciutils/pciutils.SlackBuild b/source/a/pciutils/pciutils.SlackBuild index 183c7adde..b3425b6a9 100755 --- a/source/a/pciutils/pciutils.SlackBuild +++ b/source/a/pciutils/pciutils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-3.1.3} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo pciutils-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-pciutils @@ -46,7 +55,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf pciutils-$VERSION -tar xvf $CWD/pciutils-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/pciutils-$VERSION.tar.?z* || exit 1 cd pciutils-$VERSION chown -R root:root . @@ -64,7 +73,7 @@ sh update-pciids.sh zcat $CWD/pciutils.ids.dest.diff.gz | patch -p1 --verbose || exit 1 mkdir -p $PKG/usr/sbin cat update-pciids.sh > $PKG/usr/sbin/update-pciids -chmod 755 $PKG/usr/sbin/update-pciids +chmod 0755 $PKG/usr/sbin/update-pciids make \ PREFIX=/usr \ @@ -81,7 +90,7 @@ make install install-lib \ MANDIR=/usr/man \ DESTDIR=$PKG -# Do not compress pci.ids - hal-0.5.11 needs it uncompressed +# Do not compress pci.ids - hal needs it uncompressed ( cd $PKG/usr/share ; gzip -d pci.ids.gz ) # Remove the update-pciids script that 'make install' placed rm -f $PKG/sbin/update-pciids diff --git a/source/a/pkgtools/pkgtools.SlackBuild b/source/a/pkgtools/pkgtools.SlackBuild index da70e19f0..46235e16e 100755 --- a/source/a/pkgtools/pkgtools.SlackBuild +++ b/source/a/pkgtools/pkgtools.SlackBuild @@ -1,5 +1,5 @@ #!/bin/sh -# Copyright 2005, 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005, 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -27,9 +27,9 @@ fi PKG=$TMP/package-pkgtools # *** UPDATE THESE WITH EACH BUILD: -VERSION=13.0 +VERSION=13.1 ARCH=${ARCH:-noarch} -BUILD=3 +BUILD=1 if [ ! -d $TMP ]; then mkdir -p $TMP # location to build the source diff --git a/source/a/pkgtools/scripts/explodepkg b/source/a/pkgtools/scripts/explodepkg index a113b085d..110ebf069 100644 --- a/source/a/pkgtools/scripts/explodepkg +++ b/source/a/pkgtools/scripts/explodepkg @@ -46,7 +46,7 @@ Explodes a Slackware compatible software package (or any tar+{gzip,bzip2,lzma,xz archive) in the current directory. Equivalent to (for each package listed): - ( umask 000 ; cat package_name | COMPRESSOR -dc | tar xzvf package_name ) + ( umask 000 ; cat package_name | COMPRESSOR -dc | tar xvf package_name ) Note: This should only be used for debugging or examining packages, not for installing them. It doesn't execute installation scripts or update the package diff --git a/source/a/pkgtools/scripts/pkgtool b/source/a/pkgtools/scripts/pkgtool index 6191e36e7..c0a2a9730 100644 --- a/source/a/pkgtools/scripts/pkgtool +++ b/source/a/pkgtools/scripts/pkgtool @@ -4,7 +4,7 @@ # 1998, 1999 Patrick Volkerding, Moorhead, MN USA # Copyright 2001, 2004 Slackware Linux, Inc., Concord, CA USA # All rights reserved. -# Copyright 2007, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2007, 2009, 2010 Patrick Volkerding, Sebeka, MN, USA # # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: @@ -81,11 +81,11 @@ if [ -L /bin/chmod -a -L /bin/chown ]; then # probably on the bootdisk using bus echo "You can't run pkgtool from the rootdisk until you've mounted your Linux" echo "partitions beneath /mnt. Here are some examples of this:" echo - echo "If your root partition is /dev/hda1, and is using ext2fs, you would type:" - echo "mount /dev/hda1 /mnt -t ext2" + echo "If your root partition is /dev/sda1, and is using ext2fs, you would type:" + echo "mount /dev/sda1 /mnt -t ext2" echo - echo "Then, supposing your /usr partition is /dev/hda2, you must do this:" - echo "mount /dev/hda2 /mnt/usr -t ext2" + echo "Then, supposing your /usr partition is /dev/sda2, you must do this:" + echo "mount /dev/sda2 /mnt/usr -t ext2" echo echo "Please mount your Linux partitions and then run pkgtool again." echo @@ -210,7 +210,7 @@ else # there were no arguments, so we'll get the needed information from the CMD_START="true" rm -f $TMP/SeT* while [ 0 ]; do - dialog --title "Slackware Package Tool (pkgtool version 13.0)" \ + dialog --title "Slackware Package Tool (pkgtool version 13.1)" \ --menu "\nWelcome to the Slackware package tool.\n\ \nWhich option would you like?\n" 17 75 7 \ "Current" "Install packages from the current directory" \ diff --git a/source/a/pkgtools/scripts/upgradepkg b/source/a/pkgtools/scripts/upgradepkg index cc3250dae..6b0c2abb4 100644 --- a/source/a/pkgtools/scripts/upgradepkg +++ b/source/a/pkgtools/scripts/upgradepkg @@ -245,7 +245,7 @@ if [ ! -r $ROOT/var/log/packages/$OLD ]; then +============================================================================== EOF - installpkg $INCOMINGDIR/$NNAME + /sbin/installpkg $INCOMINGDIR/$NNAME fi fi shift 1 @@ -323,11 +323,11 @@ EOF # Next, the new package is pre-installed: if [ "$VERBOSE" = "verbose" ]; then - installpkg $INCOMINGDIR/$NNAME + /sbin/installpkg $INCOMINGDIR/$NNAME RETCODE=$? else echo "Pre-installing package $NEW..." - installpkg $INCOMINGDIR/$NNAME 1> /dev/null + /sbin/installpkg $INCOMINGDIR/$NNAME 1> /dev/null RETCODE=$? fi # Make sure that worked: @@ -347,9 +347,9 @@ if [ -d "$ROOT" ]; then ( cd $ROOT/var/log/packages for rempkg in *-$TIMESTAMP ; do if [ "$VERBOSE" = "verbose" ]; then - ROOT=$ROOT removepkg $rempkg + ROOT=$ROOT /sbin/removepkg $rempkg else - ROOT=$ROOT removepkg $rempkg | grep -v "Skipping\." | grep -v "Removing files:" + ROOT=$ROOT /sbin/removepkg $rempkg | grep -v "Skipping\." | grep -v "Removing files:" fi done ) @@ -357,9 +357,9 @@ else ( cd /var/log/packages for rempkg in *-$TIMESTAMP ; do if [ "$VERBOSE" = "verbose" ]; then - removepkg $rempkg + /sbin/removepkg $rempkg else - removepkg $rempkg | grep -v "Skipping\." | grep -v "Removing files:" + /sbin/removepkg $rempkg | grep -v "Skipping\." | grep -v "Removing files:" fi done ) @@ -370,7 +370,7 @@ echo # Seriously, the reinstalling of a package can be crucial if any files # shift location, so we should always reinstall as the final step: if [ ! "$NOT_PARANOID" = "true" ]; then - installpkg $INCOMINGDIR/$NNAME + /sbin/installpkg $INCOMINGDIR/$NNAME fi echo "Package $OLD upgraded with new package $INCOMINGDIR/$NNAME." diff --git a/source/a/rpm2tgz/patches/0001-fix-d-handling.patch b/source/a/rpm2tgz/patches/0001-fix-d-handling.patch new file mode 100644 index 000000000..ca15a98fd --- /dev/null +++ b/source/a/rpm2tgz/patches/0001-fix-d-handling.patch @@ -0,0 +1,26 @@ +From 976ac157b878ecc260d54e3b5a1f3cd4403259df Mon Sep 17 00:00:00 2001 +From: Igor Murzov <igor@gplsoft.org> +Date: Sun, 18 Apr 2010 21:13:02 +0400 +Subject: [PATCH 1/6] fix -d handling + +this option also requires get_meta_data() call +to set $PRGNAM properly +--- + rpm2tgz | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/rpm2tgz b/rpm2tgz +index 5c91c64..f5f206c 100755 +--- a/rpm2tgz ++++ b/rpm2tgz +@@ -202,6 +202,7 @@ for i in $* ; do + + # Save the rpm's summary and description as the slack-desc + if [ "$DESC" = "true" ]; then ++ get_meta_data $i + mkdir -p $TMPDIR/install + rpm -qp --qf %{SUMMARY} $i | sed -l 70 -r "s/^(.*)/$PRGNAM: $PRGNAM - \1\n/" > $TMPDIR/install/slack-desc + rpm -qp --qf %{DESCRIPTION} $i | sed -l 70 -r "s/^/$PRGNAM: /" >> $TMPDIR/install/slack-desc +-- +1.7.0.2 + diff --git a/source/a/rpm2tgz/patches/0002-fix-spurious-path-to-rpm-file-with-n-option.patch b/source/a/rpm2tgz/patches/0002-fix-spurious-path-to-rpm-file-with-n-option.patch new file mode 100644 index 000000000..92a9cb259 --- /dev/null +++ b/source/a/rpm2tgz/patches/0002-fix-spurious-path-to-rpm-file-with-n-option.patch @@ -0,0 +1,34 @@ +From e2a9bf836465dbb138ee83ccbe41b385e4648014 Mon Sep 17 00:00:00 2001 +From: Igor Murzov <igor@gplsoft.org> +Date: Sun, 18 Apr 2010 22:02:45 +0400 +Subject: [PATCH 2/6] fix spurious path to rpm file with -n option + +there is no need to prepend $CWD to the path to file, +as it produce wrong path in the case, when path to file +is not relative to the current working directory +--- + rpm2tgz | 5 +++-- + 1 files changed, 3 insertions(+), 2 deletions(-) + +diff --git a/rpm2tgz b/rpm2tgz +index f5f206c..c41f456 100755 +--- a/rpm2tgz ++++ b/rpm2tgz +@@ -213,11 +213,12 @@ for i in $* ; do + # makepkg to produce the .tgz: + if [ "$(basename $0)" = "rpm2tgz" ]; then + ( +- cd $TMPDIR + if [ "$META_NAME" = "true" ]; then +- get_meta_data $CWD/$i ++ get_meta_data $i ++ cd $TMPDIR + makepkg -l y -c n $CWD/$PRGNAM-$VERSION-$ARCH-${BUILD}.tgz + else ++ cd $TMPDIR + makepkg -l y -c n $CWD/$(basename $i .rpm).tgz + fi + ) +-- +1.7.0.2 + diff --git a/source/a/rpm2tgz/patches/0003-allow-every-user-to-use-rpm2tgz.patch b/source/a/rpm2tgz/patches/0003-allow-every-user-to-use-rpm2tgz.patch new file mode 100644 index 000000000..07d20286a --- /dev/null +++ b/source/a/rpm2tgz/patches/0003-allow-every-user-to-use-rpm2tgz.patch @@ -0,0 +1,29 @@ +From c57c0a39b6745203ebec36f37318ea3b0b4820f9 Mon Sep 17 00:00:00 2001 +From: Igor Murzov <igor@gplsoft.org> +Date: Sun, 18 Apr 2010 22:06:56 +0400 +Subject: [PATCH 3/6] allow every user to use rpm2tgz + +--- + rpm2tgz | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/rpm2tgz b/rpm2tgz +index c41f456..4818b74 100755 +--- a/rpm2tgz ++++ b/rpm2tgz +@@ -216,10 +216,10 @@ for i in $* ; do + if [ "$META_NAME" = "true" ]; then + get_meta_data $i + cd $TMPDIR +- makepkg -l y -c n $CWD/$PRGNAM-$VERSION-$ARCH-${BUILD}.tgz ++ /sbin/makepkg -l y -c n $CWD/$PRGNAM-$VERSION-$ARCH-${BUILD}.tgz + else + cd $TMPDIR +- makepkg -l y -c n $CWD/$(basename $i .rpm).tgz ++ /sbin/makepkg -l y -c n $CWD/$(basename $i .rpm).tgz + fi + ) + else +-- +1.7.0.2 + diff --git a/source/a/rpm2tgz/patches/0004-produce-more-compliant-slack-desc.patch b/source/a/rpm2tgz/patches/0004-produce-more-compliant-slack-desc.patch new file mode 100644 index 000000000..836b36e5a --- /dev/null +++ b/source/a/rpm2tgz/patches/0004-produce-more-compliant-slack-desc.patch @@ -0,0 +1,29 @@ +From 531b6f6c429678f69f2c90280a1e706eed6dcfbc Mon Sep 17 00:00:00 2001 +From: Igor Murzov <igor@gplsoft.org> +Date: Sun, 18 Apr 2010 22:56:56 +0400 +Subject: [PATCH 4/6] produce more compliant slack-desc + +slackware uses slightly different format for slack-desc files +from that which is used by rpm2tgz; +also remove all -l 70 options as it is only usable with l command +--- + rpm2tgz | 3 +-- + 1 files changed, 1 insertions(+), 2 deletions(-) + +diff --git a/rpm2tgz b/rpm2tgz +index 4818b74..cc25407 100755 +--- a/rpm2tgz ++++ b/rpm2tgz +@@ -204,8 +204,7 @@ for i in $* ; do + if [ "$DESC" = "true" ]; then + get_meta_data $i + mkdir -p $TMPDIR/install +- rpm -qp --qf %{SUMMARY} $i | sed -l 70 -r "s/^(.*)/$PRGNAM: $PRGNAM - \1\n/" > $TMPDIR/install/slack-desc +- rpm -qp --qf %{DESCRIPTION} $i | sed -l 70 -r "s/^/$PRGNAM: /" >> $TMPDIR/install/slack-desc ++ rpm -qp --qf '%{NAME} (%{SUMMARY})\n\n%{DESCRIPTION}\n\n %{URL}\n' $i | head -n 11 | sed -r "s/^/$PRGNAM: /" > $TMPDIR/install/slack-desc + fi + + # If this program was called as "rpm2targz", then repack as a plain +-- +1.7.0.2 + diff --git a/source/a/rpm2tgz/patches/0005-gzip-man-info-pages.patch b/source/a/rpm2tgz/patches/0005-gzip-man-info-pages.patch new file mode 100644 index 000000000..b4849c298 --- /dev/null +++ b/source/a/rpm2tgz/patches/0005-gzip-man-info-pages.patch @@ -0,0 +1,47 @@ +From 49c80142bf0f0ead2bcff8b03a39aa98e38f2dd9 Mon Sep 17 00:00:00 2001 +From: Igor Murzov <igor@gplsoft.org> +Date: Sun, 18 Apr 2010 23:11:55 +0400 +Subject: [PATCH 5/6] gzip man & info pages + +we don't want to repack package just to fix not gzipped man pages +--- + rpm2tgz | 23 +++++++++++++++++++++++ + 1 files changed, 23 insertions(+), 0 deletions(-) + +diff --git a/rpm2tgz b/rpm2tgz +index cc25407..32c450b 100755 +--- a/rpm2tgz ++++ b/rpm2tgz +@@ -206,6 +206,29 @@ for i in $* ; do + mkdir -p $TMPDIR/install + rpm -qp --qf '%{NAME} (%{SUMMARY})\n\n%{DESCRIPTION}\n\n %{URL}\n' $i | head -n 11 | sed -r "s/^/$PRGNAM: /" > $TMPDIR/install/slack-desc + fi ++ ++ # Compress and link manpages, if any: ++ if [ -d $TMPDIR/usr/man ]; then ++ ( cd $TMPDIR/usr/man ++ for manpagedir in $(find . -type d -name "man*") ; do ++ ( cd $manpagedir ++ for eachpage in $(find . -type l -maxdepth 1) ; do ++ ln -s $( readlink $eachpage ).gz $eachpage.gz ++ rm $eachpage ++ done ++ gzip -9 *.? ++ ) ++ done ++ ) ++ fi ++ ++ # Compress info files, if any: ++ if [ -d $TMPDIR/usr/info ]; then ++ ( cd $TMPDIR/usr/info ++ rm -f dir ++ gzip -9 * ++ ) ++ fi + + # If this program was called as "rpm2targz", then repack as a plain + # tar+gz archive. If it was called as "rpm2tgz", use Slackware's +-- +1.7.0.2 + diff --git a/source/a/rpm2tgz/patches/0006-should-we-use-.txz-format-in-slackware-current.patch b/source/a/rpm2tgz/patches/0006-should-we-use-.txz-format-in-slackware-current.patch new file mode 100644 index 000000000..5d86972f0 --- /dev/null +++ b/source/a/rpm2tgz/patches/0006-should-we-use-.txz-format-in-slackware-current.patch @@ -0,0 +1,45 @@ +From 60b1b269e13d6ac5f167c898f92d1c33a4caf779 Mon Sep 17 00:00:00 2001 +From: Igor Murzov <igor@gplsoft.org> +Date: Sun, 18 Apr 2010 23:19:05 +0400 +Subject: [PATCH 6/6] should we use .txz format in slackware-current? + +yes, everyone loves xz +--- + rpm2tgz | 10 +++++----- + 1 files changed, 5 insertions(+), 5 deletions(-) + +diff --git a/rpm2tgz b/rpm2tgz +index 32c450b..4dd3756 100755 +--- a/rpm2tgz ++++ b/rpm2tgz +@@ -231,22 +231,22 @@ for i in $* ; do + fi + + # If this program was called as "rpm2targz", then repack as a plain +- # tar+gz archive. If it was called as "rpm2tgz", use Slackware's +- # makepkg to produce the .tgz: ++ # tar+xz archive. If it was called as "rpm2tgz", use Slackware's ++ # makepkg to produce the .txz: + if [ "$(basename $0)" = "rpm2tgz" ]; then + ( + if [ "$META_NAME" = "true" ]; then + get_meta_data $i + cd $TMPDIR +- /sbin/makepkg -l y -c n $CWD/$PRGNAM-$VERSION-$ARCH-${BUILD}.tgz ++ /sbin/makepkg -l y -c n $CWD/$PRGNAM-$VERSION-$ARCH-${BUILD}.txz + else + cd $TMPDIR +- /sbin/makepkg -l y -c n $CWD/$(basename $i .rpm).tgz ++ /sbin/makepkg -l y -c n $CWD/$(basename $i .rpm).txz + fi + ) + else + ( cd $TMPDIR ; tar cf - . ) > $(basename $i .rpm).tar +- gzip -9 $(basename $i .rpm).tar ++ xz -9 $(basename $i .rpm).tar + fi + + # Remove temporary directory: +-- +1.7.0.2 + diff --git a/source/a/rpm2tgz/rpm2targz b/source/a/rpm2tgz/rpm2targz index 484e5ad05..5c91c64a4 100644 --- a/source/a/rpm2tgz/rpm2targz +++ b/source/a/rpm2tgz/rpm2targz @@ -22,22 +22,35 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # -if [ "$1" = "" ]; then +CWD=$(pwd) + +# Breaking the help out into it's own deal +usage() { echo "$0: Converts RPM format to standard GNU tar + GNU zip format." echo " (view converted packages with \"less\", install and remove" echo " with \"installpkg\", \"removepkg\", \"pkgtool\", or manually" echo " with \"tar\")" echo - echo "Usage: $0 <file.rpm>" if [ "$(basename $0)" = "rpm2tgz" ]; then + echo "Usage: $0 [OPTION] <file.rpm>" echo " (Outputs \"file.tgz\")" + echo + echo " -s extract the install scripts to /usr/doc/\$PRGNAM-\$VERSION/" + echo " for review." + echo " -S extracts the install scripts to be executed on package installation" + echo " (only pre-install and post-install scripts used)" + echo " USE WITH CAUTION! " + echo " -n name the output package using the rpm's metadata" + echo " -r extract what the rpm's \"requires\" (dependencies)" + echo " as documention to /usr/doc/\$PRGNAM-\$VERSION/" + echo " -d attempt a wellformed slack-desc from the rpm meta data" + echo else + echo "Usage: $0 <file.rpm>" echo " (Outputs \"file.tar.gz\")" fi exit 1; -fi - -CWD=$(pwd) +} # Create a new temporary directory with a secure filename: make_temp_dir() { @@ -67,6 +80,51 @@ make_temp_dir() { fi } +# Get the meta data off of the rpm +get_meta_data() { + RPM=$1 + PRGNAM=$(rpm -qp --qf %{NAME} $RPM ) + ARCH=$(rpm -qp --qf %{ARCH} $RPM ) + VERSION=$(rpm -qp --qf %{VERSION} $RPM ) + BUILD=$(rpm -qp --qf %{RELEASE} $RPM ) +} + +if [ "$1" = "" ]; then + usage +fi + +ARGS=$(getopt "hsSndr" $* ) +set -- ${ARGS} +for i; do + case "$1" in + -s) + DOC_SCRIPTS="true" + shift + ;; + -S) + INSTALL_SCRIPTS="true" + shift + ;; + -r) + DOC_REQUIRES="true" + shift + ;; + -d) + DESC="true" + shift + ;; + -n) + META_NAME="true" + shift + ;; + --) + shift + break + ;; + esac +done + + for i in $* ; do # Determine if this is a source or binary RPM. @@ -78,7 +136,7 @@ for i in $* ; do isSource=0 fi else # use file. This works fine on Slackware, and is the default. - if file $i | grep RPM | grep " src " 1> /dev/null 2> /dev/null ; then + if file $i | grep RPM | grep -w src 1> /dev/null 2> /dev/null ; then isSource=1 else isSource=0 @@ -112,11 +170,56 @@ for i in $* ; do find . -type d -perm 700 -exec chmod 755 {} \; ) + # Save the scripts in the rpm as documentation + if [ "$DOC_SCRIPTS" = "true" ]; then + get_meta_data $i + mkdir -p $TMPDIR/usr/doc/$PRGNAM-$VERSION/ + for state in PREIN POSTIN PREUN POSTUN ; do + if [ "$(rpm -qp --qf %{$state} $i )" != '(none)' ] ; then + rpm -qp --qf %{$state} $i > $TMPDIR/usr/doc/$PRGNAM-$VERSION/$state.script + fi + done + fi + + # Save the scripts in the rpm to be installed + if [ "$INSTALL_SCRIPTS" = "true" ]; then + mkdir -p $TMPDIR/install + echo '#!/bin/sh' > $TMPDIR/install/doinst.sh + for state in PREIN POSTIN ; do + if [ "$(rpm -qp --qf %{$state} $i )" != '(none)' ] ; then + rpm -qp --qf %{$state} $i > $TMPDIR/install/doinst.sh + echo "" >> $TMPDIR/install/doinst.sh + fi + done + fi + + # Save the rpm's requires (dependencies) as documentation + if [ "$DOC_REQUIRES" = "true" ]; then + get_meta_data $i + mkdir -p $TMPDIR/usr/doc/$PRGNAM-$VERSION/ + rpm -qp --qf %{REQUIRES} $i > $TMPDIR/usr/doc/$PRGNAM-$VERSION/README-$PRGNAM-rpm-dependencies.txt + fi + + # Save the rpm's summary and description as the slack-desc + if [ "$DESC" = "true" ]; then + mkdir -p $TMPDIR/install + rpm -qp --qf %{SUMMARY} $i | sed -l 70 -r "s/^(.*)/$PRGNAM: $PRGNAM - \1\n/" > $TMPDIR/install/slack-desc + rpm -qp --qf %{DESCRIPTION} $i | sed -l 70 -r "s/^/$PRGNAM: /" >> $TMPDIR/install/slack-desc + fi + # If this program was called as "rpm2targz", then repack as a plain # tar+gz archive. If it was called as "rpm2tgz", use Slackware's # makepkg to produce the .tgz: if [ "$(basename $0)" = "rpm2tgz" ]; then - ( cd $TMPDIR ; makepkg -l y -c n $CWD/$(basename $i .rpm).tgz ) + ( + cd $TMPDIR + if [ "$META_NAME" = "true" ]; then + get_meta_data $CWD/$i + makepkg -l y -c n $CWD/$PRGNAM-$VERSION-$ARCH-${BUILD}.tgz + else + makepkg -l y -c n $CWD/$(basename $i .rpm).tgz + fi + ) else ( cd $TMPDIR ; tar cf - . ) > $(basename $i .rpm).tar gzip -9 $(basename $i .rpm).tar diff --git a/source/a/rpm2tgz/rpm2tgz.SlackBuild b/source/a/rpm2tgz/rpm2tgz.SlackBuild index abfe3298a..c6d766093 100755 --- a/source/a/rpm2tgz/rpm2tgz.SlackBuild +++ b/source/a/rpm2tgz/rpm2tgz.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,13 +20,22 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1 -ARCH=${ARCH:-x86_64} +VERSION=1.2.1 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-bin +PKG=$TMP/package-rpm2tgz rm -rf $PKG mkdir -p $TMP $PKG @@ -38,8 +47,26 @@ cd $TMP mkdir -p $PKG/usr/bin cc -o $PKG/usr/bin/rpmoffset $CWD/rpmoffset.c cat $CWD/rpm2targz > $PKG/usr/bin/rpm2targz -chmod 755 $PKG/usr/bin/{rpmoffset,rpm2targz} + +# Apply some patches: +( cd $PKG/usr/bin + # These are all against "rpm2tgz", so mv it until we are done patching: + mv rpm2targz rpm2tgz + zcat $CWD/patches/0001-fix-d-handling.patch.gz | patch -p1 || exit 1 + zcat $CWD/patches/0002-fix-spurious-path-to-rpm-file-with-n-option.patch.gz | patch -p1 || exit 1 + zcat $CWD/patches/0003-allow-every-user-to-use-rpm2tgz.patch.gz | patch -p1 || exit 1 + zcat $CWD/patches/0004-produce-more-compliant-slack-desc.patch.gz | patch -p1 || exit 1 + # Not applied. Rationale: We do not want to alter the files in the RPM. + #zcat $CWD/patches/0005-gzip-man-info-pages.patch.gz | patch -p1 || exit 1 + # Not applied. Rationale: .tgz works with all versions of Slackware. + # Translated RPMs may be targeting systems with no .txz support. + #zcat $CWD/patches/0006-should-we-use-.txz-format-in-slackware-current.patch.gz | patch -p1 || exit 1 + # mv the script back: + mv rpm2tgz rpm2targz +) || exit 1 + ( cd $PKG/usr/bin ; ln -sf rpm2targz rpm2tgz ) +chmod 755 $PKG/usr/bin/{rpmoffset,rpm2targz} mkdir -p $PKG/usr/doc/rpm2targz cp -a $CWD/rpm2targz.README $PKG/usr/doc/rpm2targz/rpm2targz.README chown root:root $PKG/usr/doc/rpm2targz/rpm2targz.README diff --git a/source/a/rpm2tgz/rpmoffset.c b/source/a/rpm2tgz/rpmoffset.c index 57af397c6..fd09e623b 100644 --- a/source/a/rpm2tgz/rpmoffset.c +++ b/source/a/rpm2tgz/rpmoffset.c @@ -5,6 +5,7 @@ /* Wouldn't it be a lot more sane if we could just untar these things? */ #include <stdlib.h> +#include <stdio.h> /* These offsets keep getting bigger, so we're going to just bite a 2MB */ /* chunk of RAM right away so that we have enough. Yeah, horrible */ diff --git a/source/a/sdparm/sdparm.SlackBuild b/source/a/sdparm/sdparm.SlackBuild index e00a93568..c0d155ef3 100755 --- a/source/a/sdparm/sdparm.SlackBuild +++ b/source/a/sdparm/sdparm.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,16 +22,24 @@ PKGNAM=sdparm -VERSION=${VERSION:-1.01} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} - +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:-"-j6"} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -39,11 +47,15 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2" +else + SLKCFLAGS="-O2" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xjvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -68,13 +80,15 @@ CFLAGS="$SLKCFLAGS" \ --build=$ARCH-slackware-linux # Build and install: -make -j4 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 # Strip binaries: ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) # Compress and link manpages, if any: @@ -96,12 +110,19 @@ fi mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ AUTHORS COPYING CREDITS INSTALL NEWS README notes.txt \ - doc/sdparm.html \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/sed/sed.SlackBuild b/source/a/sed/sed.SlackBuild index 8dedfc4b4..7684a10dc 100755 --- a/source/a/sed/sed.SlackBuild +++ b/source/a/sed/sed.SlackBuild @@ -21,22 +21,35 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.1.5 -ARCH=${ARCH:-x86_64} +VERSION=4.2.1 BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-sed +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i386" ]; then SLKCFLAGS="-O2 -march=i386 -mcpu=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" fi rm -rf $PKG @@ -44,34 +57,61 @@ mkdir -p $PKG $PKG cd $TMP rm -rf sed-$VERSION -tar xzvf $CWD/sed-$VERSION.tar.gz +tar xvf $CWD/sed-$VERSION.tar.?z* || exit 1 cd sed-$VERSION chown -R root:root . find . -perm 777 -exec chmod 755 {} \; find . -perm 664 -exec chmod 644 {} \; + CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ - $ARCH-slackware-linux -make -j5 -make install DESTDIR=$PKG + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/sed-$VERSION \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + mkdir -p $PKG/bin mv $PKG/usr/bin/sed $PKG/bin ( cd $PKG/usr/bin ; ln -sf /bin/sed . ) + ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +rm -f $PKG/usr/info/dir +gzip -9 $PKG/usr/info/* + mkdir -p $PKG/usr/doc/sed-$VERSION cp -a \ - ANNOUNCE AUTHORS BUGS COPYING* INSTALL NEWS README README.boot THANKS TODO \ + AUTHORS BUGS COPYING* INSTALL NEWS README* THANKS \ $PKG/usr/doc/sed-$VERSION -gzip -9 $PKG/usr/man/man?/*.? -rm -f $PKG/usr/info/dir -gzip -9 $PKG/usr/info/* + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -makepkg -l y -c n $TMP/sed-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/sed-$VERSION-$ARCH-$BUILD.txz diff --git a/source/a/shadow/adduser b/source/a/shadow/adduser index 02385e33c..038a0a949 100644 --- a/source/a/shadow/adduser +++ b/source/a/shadow/adduser @@ -1,8 +1,8 @@ #!/bin/bash # # Copyright 1995 Hrvoje Dogan, Croatia. -# Copyright 2002, 2003, 2004, 2008, 2009 Stuart Winter, Surrey, England, UK. -# Copyright 2004, 2008, 2009 Slackware Linux, Inc., Concord, CA, USA +# Copyright 2002-2004, 2008, 2009, 2010 Stuart Winter, Surrey, England, UK. +# Copyright 2004, 2008-2010 Slackware Linux, Inc., Concord, CA, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -29,12 +29,15 @@ # Author : Stuart Winter <mozes@slackware.com> # Based on the original Slackware adduser by Hrvoje Dogan # with modifications by Patrick Volkerding -# Version: 1.12 +# Version: 1.13 ########################################################################## # Usage..: adduser [<new_user_name>] ########################################################################## # History # ########### +# v1.13 - 13/01/10 +# * Fix bug that removed underscore characters from group names. +# Thanks to mRgOBLIN for the report and Jim Hawkins for the fix. <sw> # v1.12 - 21/07/09 # * Adjusted the search of /etc/passwd to exclude the NIS inclusion # string. Thanks to Dominik L. Borkowski. @@ -282,8 +285,8 @@ while [ ! -z "$needinput" ]; do history -c history -s "$AGID" echo "Press ENTER to continue without adding any additional groups" - echo "Or press the UP arrow to add/select/edit additional groups" - AGID="$(get_input ": " | tr -d '[:punct:]' | tr -s ' ' | sed 's?^ $??g' )" + echo "Or press the UP arrow key to add/select/edit additional groups" + AGID="$(get_input ": " | sed 's/[^A-Za-z0-9 _]//g;s/ */ /g;s/^ $//g' )" if [ ! -z "$AGID" ]; then check_group "$AGID" # check all groups at once (treated as N # of params) if [ $? -gt 0 ]; then diff --git a/source/a/shadow/doinst.sh b/source/a/shadow/doinst.sh new file mode 100644 index 000000000..88fefb3af --- /dev/null +++ b/source/a/shadow/doinst.sh @@ -0,0 +1,17 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/login.access.new +config etc/login.defs.new +config var/log/faillog.new +rm -f var/log/faillog.new + diff --git a/source/a/shadow/login.defs b/source/a/shadow/login.defs new file mode 100644 index 000000000..dde37c97b --- /dev/null +++ b/source/a/shadow/login.defs @@ -0,0 +1,387 @@ +# +# /etc/login.defs - Configuration control definitions for the shadow package. +# +# $Id: login.defs 3038 2009-07-23 20:41:35Z nekral-guest $ +# + +# +# Delay in seconds before being allowed another attempt after a login failure +# +FAIL_DELAY 3 + +# +# Enable logging and display of /var/log/faillog login failure info. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login failures are recorded. +# +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable logging and display of /var/log/lastlog login time info. +# +LASTLOG_ENAB yes + +# +# Enable checking and display of mailbox status upon login. +# +# Disable if the shell startup files already check for mail +# ("mailx -e" or equivalent). +# +MAIL_CHECK_ENAB yes + +# +# Enable additional checks upon password changes. +# +OBSCURE_CHECKS_ENAB yes + +# +# Enable checking of time restrictions specified in /etc/porttime. +# +PORTTIME_CHECKS_ENAB yes + +# +# Enable setting of ulimit, umask, and niceness from passwd gecos field. +# +QUOTAS_ENAB yes + +# +# Enable "syslog" logging of su activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp and sg. +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# upon these devices. +# +CONSOLE /etc/securetty +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# If defined, all su activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, ":" delimited list of "message of the day" files to +# be displayed upon login. +# +MOTD_FILE /etc/motd +#MOTD_FILE /etc/motd:/usr/lib/news/news-motd + +# +# If defined, this file will be output before each login prompt. +# +#ISSUE_FILE /etc/issue + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format something like "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login failures will be logged here in a utmp format. +# last, when invoked as lastb, will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, name of file whose presence which will inhibit non-root +# logins. The contents of this file should be a message indicating +# why logins are inhibited. +# +NOLOGINS_FILE /etc/nologin + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then a "ps" will display the +# command is "-su". If not defined, then "ps" would display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# *REQUIRED* +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define both, MAIL_DIR takes precedence. +# +MAIL_DIR /var/spool/mail +#MAIL_FILE .mail + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# If defined, either a TZ environment parameter spec or the +# fully-rooted pathname of a file containing such a spec. +# +#ENV_TZ TZ=CST6CDT +#ENV_TZ /etc/tzname + +# +# If defined, an HZ environment parameter spec. +# +# for Linux/x86 +ENV_HZ HZ=100 +# For Linux/Alpha... +#ENV_HZ HZ=1024 + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/sbin:/usr/sbin:/bin:/usr/bin +ENV_PATH PATH=/usr/local/bin:/bin:/usr/bin + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a "write" program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP to the group number and +# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign +# TTYPERM to either 622 or 600. +# +TTYGROUP tty +TTYPERM 0620 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# ULIMIT Default "ulimit" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# The ULIMIT is used only if the system supports it. +# (now it works with setrlimit too; ulimit is in 512-byte units) +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +#ULIMIT 2097152 + +# Default initial "umask" value. +# UMASK is also used by useradd and newusers to set the mode of new home +# directories. +# 022 is the default value, but 027, or even 077, could be considered +# better for privacy. There is no One True Answer here: each sysadmin +# must make up her mind. +UMASK 022 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_MIN_LEN Minimum acceptable password length. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_MIN_LEN 5 +PASS_WARN_AGE 7 + +# +# If "yes", the user must be listed as a member of the first gid 0 group +# in /etc/group (called "root" on most Linux systems) to be able to "su" +# to uid 0 accounts. If the group doesn't exist or is empty, no one +# will be able to "su" to uid 0. +# +SU_WHEEL_ONLY no + +# +# If compiled with cracklib support, where are the dictionaries +# +#CRACKLIB_DICTPATH /var/cache/cracklib/cracklib_dict + +# +# Min/max values for automatic uid selection in useradd +# +UID_MIN 1000 +UID_MAX 60000 +# System accounts +SYS_UID_MIN 101 +SYS_UID_MAX 999 + +# +# Min/max values for automatic gid selection in groupadd +# +GID_MIN 1000 +GID_MAX 60000 +# System accounts +SYS_GID_MIN 101 +SYS_GID_MAX 999 + +# +# Max number of login retries if password is bad +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login +# +LOGIN_TIMEOUT 60 + +# +# Maximum number of attempts to change password if rejected (too easy) +# +PASS_CHANGE_TRIES 5 + +# +# Warn about weak passwords (but still allow them) if you are root. +# +PASS_ALWAYS_WARN yes + +# +# Number of significant characters in the password for crypt(). +# Default is 8, don't change unless your crypt() is better. +# Ignored if MD5_CRYPT_ENAB set to "yes". +# +#PASS_MAX_LEN 8 + +# +# Require password before chfn/chsh can make any changes. +# +CHFN_AUTH yes + +# +# Which fields may be changed by regular users using chfn - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT frwh + +# +# Password prompt (%s will be replaced by user name). +# +# XXX - it doesn't work correctly yet, for now leave it commented out +# to use the default which is just "Password: ". +#LOGIN_STRING "%s's Password: " + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# This variable is deprecated. You should use ENCRYPT_METHOD. +# +#MD5_CRYPT_ENAB no + +# +# Only works if compiled with ENCRYPTMETHOD_SELECT defined: +# If set to MD5 , MD5-based algorithm will be used for encrypting password +# If set to SHA256, SHA256-based algorithm will be used for encrypting password +# If set to SHA512, SHA512-based algorithm will be used for encrypting password +# If set to DES, DES-based algorithm will be used for encrypting password (default) +# Overrides the MD5_CRYPT_ENAB option +# +ENCRYPT_METHOD MD5 + +# +# Only works if ENCRYPT_METHOD is set to SHA256 or SHA512. +# +# Define the number of SHA rounds. +# With a lot of rounds, it is more difficult to brute forcing the password. +# But note also that it more CPU resources will be needed to authenticate +# users. +# +# If not specified, the libc will choose the default number of rounds (5000). +# The values must be inside the 1000-999999999 range. +# If only one of the MIN or MAX values is set, then this value will be used. +# If MIN > MAX, the highest value will be used. +# +# SHA_CRYPT_MIN_ROUNDS 5000 +# SHA_CRYPT_MAX_ROUNDS 5000 + +# +# List of groups to add to the user's supplementary group set +# when logging in on the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in on the console. +# How to do it is left as an exercise for the reader... +# +# Most of these groups are self-explanatory. +# +# Note that users are added to these default groups only when +# logging into a shell with /bin/login, not when using a login +# manager such as kdm. In that case, users who should have +# hardware access must be added to the appropriate groups +# when the user is added with adduser or useradd, or by editing +# /etc/group directly, preferably using "vigr" +# +CONSOLE_GROUPS floppy:audio:cdrom:video:scanner + +# +# Should login be allowed if we can't cd to the home directory? +# Default in no. +# +DEFAULT_HOME yes + +# +# If this file exists and is readable, login environment will be +# read from it. Every line should be in the form name=value. +# +ENVIRON_FILE /etc/environment + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# Enable setting of the umask group bits to be the same as owner bits +# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is +# the same as gid, and username is the same as the primary group name. +# +# This also enables userdel to remove user groups if no members exist. +# +USERGROUPS_ENAB yes + +# +# If set to a non-nul number, the shadow utilities will make sure that +# groups never have more than this number of users on one line. +# This permit to support split groups (groups split into multiple lines, +# with the same group ID, to avoid limitation of the line length in the +# group file). +# +# 0 is the default value and disables this feature. +# +#MAX_MEMBERS_PER_GROUP 0 + +# +# If useradd should create home directories for users by default (non +# system users only) +# This option is overridden with the -M or -m flags on the useradd command +# line. +# +#CREATE_HOME yes + diff --git a/source/a/shadow/shadow-4.0.3.x86_64.diff b/source/a/shadow/shadow-4.0.3.x86_64.diff deleted file mode 100644 index 15d16c7c8..000000000 --- a/source/a/shadow/shadow-4.0.3.x86_64.diff +++ /dev/null @@ -1,166 +0,0 @@ ---- shadow-4.0.3/libmisc/failure.h.orig 2004-01-02 18:47:01.000000000 -0800 -+++ shadow-4.0.3/libmisc/failure.h 2004-01-02 18:52:38.000000000 -0800 -@@ -4,7 +4,12 @@ - - #include "defines.h" - #include "faillog.h" -+ -+#if HAVE_UTMPX_H -+#include <utmpx.h> -+#else - #include <utmp.h> -+#endif - - /* - * failure - make failure entry -@@ -38,7 +43,11 @@ - * failtmp updates the (struct utmp) formatted failure log which - * maintains a record of all login failures. - */ -+#if HAVE_UTMPX_H -+extern void failtmp(const struct utmpx *); -+#else - extern void failtmp(const struct utmp *); -+#endif - - #endif - ---- shadow-4.0.3/libmisc/failure.c.orig 2004-01-02 18:47:06.000000000 -0800 -+++ shadow-4.0.3/libmisc/failure.c 2004-01-02 18:53:37.000000000 -0800 -@@ -39,7 +39,11 @@ - #include "getdef.h" - #include "failure.h" - -+#if HAVE_UTMPX_H -+#include <utmpx.h> -+#else - #include <utmp.h> -+#endif - - #define YEAR (365L*DAY) - -@@ -248,7 +252,11 @@ - */ - - void -+#if HAVE_UTMPX_H -+failtmp(const struct utmpx *failent) -+#else - failtmp(const struct utmp *failent) -+#endif - { - char *ftmp; - int fd; ---- shadow-4.0.3/libmisc/log.c.orig 2004-01-02 18:58:04.000000000 -0800 -+++ shadow-4.0.3/libmisc/log.c 2004-01-02 18:58:51.000000000 -0800 -@@ -57,6 +57,7 @@ - int fd; - off_t offset; - struct lastlog newlog; -+ time_t ll_time; - - /* - * If the file does not exist, don't create it. -@@ -88,7 +89,8 @@ - if (ll) - *ll = newlog; - -- time(&newlog.ll_time); -+ ll_time = newlog.ll_time; -+ time(&ll_time); - strncpy(newlog.ll_line, line, sizeof newlog.ll_line); - #if HAVE_LL_HOST - strncpy(newlog.ll_host, host, sizeof newlog.ll_host); ---- shadow-4.0.3/libmisc/utmp.c.orig 2004-01-02 18:59:04.000000000 -0800 -+++ shadow-4.0.3/libmisc/utmp.c 2004-01-02 19:05:34.000000000 -0800 -@@ -79,6 +79,8 @@ - { - char *line; - struct utmp *ut; -+ time_t uttime; -+ - pid_t pid = getpid(); - - setutent(); -@@ -111,7 +113,8 @@ - /* XXX - assumes /dev/tty?? */ - strncpy(utent.ut_id, utent.ut_line + 3, sizeof utent.ut_id); - strcpy(utent.ut_user, "LOGIN"); -- time(&utent.ut_time); -+ time(&uttime); -+ utent.ut_time = uttime; - } - } - -@@ -284,9 +287,14 @@ - void - setutmp(const char *name, const char *line, const char *host) - { -+ time_t uttime; -+ - utent.ut_type = USER_PROCESS; - strncpy(utent.ut_user, name, sizeof utent.ut_user); -- time(&utent.ut_time); -+ -+ time(&uttime); -+ utent.ut_time = uttime; -+ - /* other fields already filled in by checkutmp above */ - setutent(); - pututline(&utent); ---- shadow-4.0.3/src/lastlog.c.orig 2004-01-02 18:06:09.000000000 -0800 -+++ shadow-4.0.3/src/lastlog.c 2004-01-02 18:29:57.000000000 -0800 -@@ -167,6 +167,7 @@ - static int once; - char *cp; - struct tm *tm; -+ time_t ll_time; - - #ifdef HAVE_STRFTIME - char ptime[80]; -@@ -184,7 +185,9 @@ - #endif - once++; - } -- tm = localtime (&lastlog.ll_time); -+ ll_time = lastlog.ll_time; -+ tm = localtime (&ll_time); -+ - #ifdef HAVE_STRFTIME - strftime (ptime, sizeof (ptime), "%a %b %e %H:%M:%S %z %Y", tm); - cp = ptime; ---- shadow-4.0.3/src/login.c.orig 2004-01-02 18:33:13.000000000 -0800 -+++ shadow-4.0.3/src/login.c 2004-01-02 18:40:17.000000000 -0800 -@@ -1019,8 +1019,12 @@ - const char *failent_user; - - #if HAVE_UTMPX_H -+ struct timeval ut_tv; -+ ut_tv.tv_sec = failent.ut_tv.tv_sec; -+ ut_tv.tv_usec = failent.ut_tv.tv_usec; -+ - failent = utxent; -- gettimeofday (&(failent.ut_tv), NULL); -+ gettimeofday (&ut_tv, NULL); - #else - failent = utent; - time (&failent.ut_time); -@@ -1271,15 +1275,16 @@ - } - if (getdef_bool ("LASTLOG_ENAB") - && lastlog.ll_time != 0) { -+ time_t ll_time= lastlog.ll_time; - #ifdef HAVE_STRFTIME - strftime (ptime, sizeof (ptime), - "%a %b %e %H:%M:%S %z %Y", -- localtime (&lastlog.ll_time)); -+ localtime (&ll_time)); - printf (_("Last login: %s on %s"), - ptime, lastlog.ll_line); - #else - printf (_("Last login: %.19s on %s"), -- ctime (&lastlog.ll_time), -+ ctime (&ll_time), - lastlog.ll_line); - #endif - #ifdef HAVE_LL_HOST /* SVR4 || __linux__ || SUN4 */ diff --git a/source/a/shadow/shadow.SlackBuild b/source/a/shadow/shadow.SlackBuild index 2f0e11786..77e34089c 100755 --- a/source/a/shadow/shadow.SlackBuild +++ b/source/a/shadow/shadow.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,24 +20,40 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.0.3 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-18} +VERSION=4.1.4.2 +BUILD=${BUILD:-3} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-shadow +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" +fi + rm -rf $PKG mkdir -p $TMP $PKG - -# Explode the package framework: -cd $PKG -explodepkg $CWD/_shadow.tar.gz - cd $TMP rm -rf shadow-$VERSION -tar xjvf $CWD/shadow-$VERSION.tar.bz2 +tar xvf $CWD/shadow-$VERSION.tar.?z* || exit 1 cd shadow-$VERSION chown -R root:root . @@ -47,110 +63,91 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -zcat $CWD/shadow.shadowconfig.diff.gz | patch -p1 --verbose --backup || exit 1 -zcat $CWD/shadow.newgrp.nopam.gz | patch -p0 --verbose --backup || exit 1 -zcat $CWD/shadow.login.defs.diff.gz | patch -p0 --verbose --backup || exit 1 -zcat $CWD/shadow.newgrp.getlogin.gz | patch -p1 --verbose --backup || exit 1 -zcat $CWD/shadow.gcc34.diff.gz | patch -p1 --verbose --backup || exit 1 -zcat $CWD/shadow.remove.obsolete.options.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -if [ "$ARCH" = "x86_64" ]; then - zcat $CWD/shadow-4.0.3.x86_64.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -fi - +CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --docdir=/usr/doc/shadow-$VERSION \ --disable-shared \ - --disable-desrpc \ + --without-libcrack \ --build=$ARCH-slackware-linux -make -j6 || exit 1 -cat etc/login.defs.linux > $PKG/etc/login.defs.new -cat etc/login.access > $PKG/etc/login.access.new +# --enable-utmpx # defaults to 'no' + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Fix user group = 100: +zcat $CWD/useradd.gz > $PKG/etc/default/useradd + +# /bin/groups is provided by coreutils. +rm -f $PKG/bin/groups +find $PKG -name groups.1 -exec rm {} \; + +# Install a login.defs with unsurprising defaults: +rm -f $PKG/etc/login.defs +zcat $CWD/login.defs.gz > $PKG/etc/login.defs.new + +mv $PKG/etc/login.access $PKG/etc/login.access.new + +# I don't think this works well enough to recommend it. +#mv $PKG/etc/limits $PKG/etc/limits.new +rm -f $PKG/etc/limits + +# Add the friendly 'adduser' script: cat $CWD/adduser > $PKG/usr/sbin/adduser +chmod 0755 $PKG/usr/sbin/adduser + +# Add sulogin to the package: +cp -a src/sulogin $PKG/sbin +( cd $PKG/bin ; ln -s ../sbin/sulogin ) + +# Add the empty faillog log file: +mkdir -p $PKG/var/log +touch $PKG/var/log/faillog.new + +# Put some stuff back in "old" locations and make symlinks for compat +( cd $PKG/usr/bin + mv faillog ../sbin + mv lastlog ../sbin + ln -s ../sbin/faillog + ln -s ../sbin/lastlog +) + +# Fixup a few permissions: +chmod 4711 $PKG/bin/su +chmod 4711 $PKG/usr/bin/* + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi -# These things aren't needed when using glibc, as it -# supplies its own shadow functions: -#cat lib/libshadow.a > $PKG/usr/lib/libshadow.a -#cp -a lib/pwauth.h $PKG/usr/include/shadow/pwauth.h -#cp -a lib/shadow_.h $PKG/usr/include/shadow/shadow.h -#chmod 644 $PKG/usr/include/shadow/* -#chown root.root $PKG/usr/include/shadow/* - -cd po -for file in *.gmo ; do - mkdir -p $PKG/usr/share/locale/$(basename $file .gmo)/LC_MESSAGES - cat $file > $PKG/usr/share/locale/$(basename $file .gmo)/LC_MESSAGES/shadow.mo -done -cd ../src -cat login > $PKG/bin/login -cat su > $PKG/bin/su -cat sulogin > $PKG/sbin/sulogin -cat ../debian/shadowconfig.sh > $PKG/usr/sbin/shadowconfig -for file in chpasswd dpasswd faillog groupadd groupdel groupmod grpck \ -lastlog logoutd mkpasswd newusers pwck useradd userdel usermod \ -pwconv pwunconv grpconv grpunconv vipw ; do - cat $file > $PKG/usr/sbin/$file -done -for file in chage chfn chsh expiry gpasswd newgrp passwd ; do - cat $file > $PKG/usr/bin/$file -done -cd .. -cp contrib/adduser.sh /sbin/adduser mkdir -p $PKG/usr/doc/shadow-$VERSION cp -a \ - ABOUT-NLS ChangeLog NEWS README TODO doc/* \ + COPYING ChangeLog NEWS README TODO doc/{README*,HOWTO,WISHLIST,*.txt} \ $PKG/usr/doc/shadow-$VERSION -chmod 644 $PKG/usr/doc/shadow-$VERSION/* - -install_man_pages() { -for file in chage.1 chfn.1 chsh.1 gpasswd.1 groups.1 login.1 newgrp.1 \ -passwd.1 su.1 ; do - if [ -r $file ]; then - mkdir -p $1/man1 - gzip -9c $file > $1/man1/$file.gz - fi -done -for file in pw_auth.3 shadow.3 ; do - if [ -r $file ]; then - mkdir -p $1/man3 - gzip -9c $file > $1/man3/$file.gz - fi -done -for file in faillog.5 limits.5 login.access.5 login.defs.5 passwd.5 \ -porttime.5 shadow.5 suauth.5 ; do - if [ -r $file ]; then - mkdir -p $1/man5 - gzip -9c $file > $1/man5/$file.gz - fi -done -for file in chpasswd.8 dpasswd.8 faillog.8 groupadd.8 groupdel.8 groupmod.8 \ -grpck.8 lastlog.8 logoutd.8 mkpasswd.8 newusers.8 pwauth.8 pwck.8 pwconv.8 \ -shadowconfig.8 sulogin.8 useradd.8 userdel.8 usermod.8 vipw.8 ; do - if [ -r $file ]; then - mkdir -p $1/man8 - gzip -9c $file > $1/man8/$file.gz - fi -done -} - -cd man - install_man_pages $PKG/usr/man - for dir in * ; do - if [ -d $dir ] ; then - ( cd $dir ; install_man_pages $PKG/usr/man/$dir ) - fi - done -cd .. +#chmod 0644 $PKG/usr/doc/shadow-$VERSION/* + +# The entire ChangeLog is excessive for most users: +cat $PKG/usr/doc/shadow-$VERSION/ChangeLog | head -n 2000 > $PKG/usr/doc/shadow-$VERSION/CL +mv $PKG/usr/doc/shadow-$VERSION/CL $PKG/usr/doc/shadow-$VERSION/ChangeLog mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh -# Build the package: cd $PKG -makepkg -l y -c n $TMP/shadow-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/shadow-$VERSION-$ARCH-$BUILD.txz -# Clean up the extra stuff: -if [ "$1" = "--cleanup" ]; then - rm -rf $TMP/shadow-$VERSION - rm -rf $PKG -fi diff --git a/source/a/shadow/shadow.gcc34.diff b/source/a/shadow/shadow.gcc34.diff deleted file mode 100644 index 71dff4c85..000000000 --- a/source/a/shadow/shadow.gcc34.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./libmisc/xmalloc.c.orig 1998-12-28 14:34:56.000000000 -0600 -+++ ./libmisc/xmalloc.c 2006-08-12 19:02:51.000000000 -0500 -@@ -16,8 +16,6 @@ - - #include "defines.h" - --extern char *malloc(); -- - char * - xmalloc(size_t size) - { diff --git a/source/a/shadow/shadow.login.defs.diff b/source/a/shadow/shadow.login.defs.diff deleted file mode 100644 index bfed463ae..000000000 --- a/source/a/shadow/shadow.login.defs.diff +++ /dev/null @@ -1,67 +0,0 @@ ---- ./etc/login.defs.linux.orig 2000-08-26 13:27:10.000000000 -0500 -+++ ./etc/login.defs.linux 2008-03-24 15:10:09.000000000 -0500 -@@ -170,8 +170,8 @@ - # *REQUIRED* The default PATH settings, for superuser and normal users. - # - # (they are minimal, add the rest in the shell startup files) --ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin --ENV_PATH PATH=/bin:/usr/bin -+ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/sbin:/usr/sbin:/bin:/usr/bin -+ENV_PATH PATH=/usr/local/bin:/bin:/usr/bin - - # - # Terminal permissions -@@ -185,7 +185,7 @@ - # TTYPERM to either 622 or 600. - # - TTYGROUP tty --TTYPERM 0600 -+TTYPERM 0620 - - # - # Login configuration initializations: -@@ -230,7 +230,7 @@ - # - # If compiled with cracklib support, where are the dictionaries - # --CRACKLIB_DICTPATH /var/cache/cracklib/cracklib_dict -+#CRACKLIB_DICTPATH /var/cache/cracklib/cracklib_dict - - # - # Min/max values for automatic uid selection in useradd -@@ -282,7 +282,7 @@ - # phone, home phone). If not defined, no changes are allowed. - # For backward compatibility, "yes" = "rwh" and "no" = "frwh". - # --CHFN_RESTRICT rwh -+CHFN_RESTRICT frwh - - # - # Password prompt (%s will be replaced by user name). -@@ -299,7 +299,7 @@ - # Set to "no" if you need to copy encrypted passwords to other systems - # which don't understand the new algorithm. Default is "no". - # --#MD5_CRYPT_ENAB no -+MD5_CRYPT_ENAB yes - - # - # List of groups to add to the user's supplementary group set -@@ -310,7 +310,16 @@ - # access to these groups, even when not logged in on the console. - # How to do it is left as an exercise for the reader... - # --#CONSOLE_GROUPS floppy:audio:cdrom -+# Most of these groups are self-explanatory. -+# -+# Note that users are added to these default groups only when -+# logging into a shell with /bin/login, not when using a login -+# manager such as kdm. In that case, users who should have -+# hardware access must be added to the appropriate groups -+# when the user is added with adduser or useradd, or by editing -+# /etc/group directly. -+# -+CONSOLE_GROUPS floppy:audio:cdrom:video - - # - # Should login be allowed if we can't cd to the home directory? diff --git a/source/a/shadow/shadow.newgrp.getlogin b/source/a/shadow/shadow.newgrp.getlogin deleted file mode 100644 index 5d032f15c..000000000 --- a/source/a/shadow/shadow.newgrp.getlogin +++ /dev/null @@ -1,21 +0,0 @@ ---- ./src/newgrp.c.orig 2003-05-31 21:19:39.000000000 -0700 -+++ ./src/newgrp.c 2003-05-31 21:21:32.000000000 -0700 -@@ -76,6 +76,7 @@ - gid_t gid; - char *cp; - const char *cpasswd, *name, *prog; -+ char *loginname = NULL; - char *group = NULL; - char *command = NULL; - char **envp = environ; -@@ -386,7 +387,9 @@ - SYSLOG ((LOG_INFO, "user `%s' switched to group `%s'", - name, group)); - if (getdef_bool ("SYSLOG_SG_ENAB")) { -- char *loginname = xstrdup (getlogin ()); -+ char *user = getlogin (); -+ if (user != NULL) -+ loginname = xstrdup (user); - char *tty = xstrdup (ttyname (0)); - - if (loginname == NULL) diff --git a/source/a/shadow/shadow.newgrp.nopam b/source/a/shadow/shadow.newgrp.nopam deleted file mode 100644 index 7920dde00..000000000 --- a/source/a/shadow/shadow.newgrp.nopam +++ /dev/null @@ -1,18 +0,0 @@ ---- src/newgrp.c.orig 2002-10-12 14:15:34.000000000 +0100 -+++ src/newgrp.c 2002-10-12 14:15:42.000000000 +0100 -@@ -398,6 +398,7 @@ - SYSLOG ((LOG_INFO, - "user `%s' (login `%s' on %s) switched to group `%s'", - name, loginname, tty, group)); -+#ifdef USE_PAM - if (getdef_bool ("CLOSE_SESSIONS")) { - /* - * We want to fork and exec the new shell in the child, leaving the -@@ -450,6 +451,7 @@ - signal (SIGTTIN, SIG_DFL); - signal (SIGTTOU, SIG_DFL); - } -+#endif // USE_PAM - } - #endif /* USE_SYSLOG */ - diff --git a/source/a/shadow/shadow.remove.obsolete.options.diff b/source/a/shadow/shadow.remove.obsolete.options.diff deleted file mode 100644 index 100fe2a88..000000000 --- a/source/a/shadow/shadow.remove.obsolete.options.diff +++ /dev/null @@ -1,78 +0,0 @@ ---- ./man/passwd.1.orig 2002-03-13 11:52:15.000000000 -0600 -+++ ./man/passwd.1 2006-08-20 18:29:58.000000000 -0500 -@@ -29,26 +29,17 @@ - .SH NAME - passwd \- change user password - .SH SYNOPSIS --\fBpasswd\fR [\fB-f\fR|\fB-s\fR] [\fIname\fR] --.br --\fBpasswd\fR [\fB-g\fR] [\fB-r\fR|\fB-R\fR] \fIgroup\fR -+\fBpasswd\fR [\fIname\fR] - .br - \fBpasswd\fR [\fB-x \fImax\fR] [\fB-n \fImin\fR] - [\fB-w \fIwarn\fR] [\fB-i \fIinact\fR] \fIlogin\fR - .br - \fBpasswd\fR {\fB-l\fR|\fB-u\fR|\fB-d\fR|\fB-S\fR|\fB-e\fR} \fIlogin\fR - .SH DESCRIPTION --\fBpasswd\fR changes passwords for user and group accounts. -+\fBpasswd\fR changes passwords for user accounts. - A normal user may only change the password for his/her own account, - the super user may change the password for any account. --The administrator of a group may change the password for the group. --\fBpasswd\fR also changes account information, such as the full name --of the user, user's login shell, or password expiry date and interval. --.PP --The \fB-s\fR option makes passwd call chsh to change the user's shell. The --\fB-f\fR option makes passwd call chfn to change the user's gecos --information. These two options are only meant for compatiblity, since the --other programs can be called directly. -+.PP - .SS Password Changes - The user is first prompted for his/her old password, if one is present. - This password is then encrypted and compared against the -@@ -86,17 +77,6 @@ - against the first. - Both entries are required to match in order for the password - to be changed. --.SS Group passwords --When the \fB-g\fR option is used, the password for the named --group is changed. --The user must either be the super user, or a group administrator --for the named group. --The current group password is not prompted for. --The \fB-r\fR option is used with the \fB-g\fR option to remove --the current password from the named group. --This allows group access to all members. --The \fB-R\fR option is used with the \fB-g\fR option to restrict --the named group for all users. - .SS Password expiry information - The password aging information may be changed by the super - user with the \fB-x\fR, \fB-n\fR, \fB-w\fR, and \fB-i\fR options. -@@ -191,6 +171,9 @@ - .br - /etc/shadow \- encrypted user passwords - .SH "SEE ALSO" -+.BR chfn (1), -+.BR chsh (1), -+.BR gpasswd (1), - .BR group (5), - .BR passwd (5) - .SH AUTHOR ---- ./src/passwd.c.orig 2002-01-05 09:41:43.000000000 -0600 -+++ ./src/passwd.c 2006-08-20 18:31:50.000000000 -0500 -@@ -955,6 +955,7 @@ - * Please run these programs directly. --marekm - */ - -+#ifdef I_LIKE_OBSOLETE_OPTIONS - if (argc > 1 && argv[1][0] == '-' && strchr ("gfs", argv[1][1])) { - char buf[200]; - -@@ -980,6 +981,7 @@ - closelog (); - exit (E_FAILURE); - } -+#endif - - /* - * The remaining arguments will be processed one by one and executed diff --git a/source/a/shadow/shadow.shadowconfig.diff b/source/a/shadow/shadow.shadowconfig.diff deleted file mode 100644 index 7dc9286e7..000000000 --- a/source/a/shadow/shadow.shadowconfig.diff +++ /dev/null @@ -1,49 +0,0 @@ ---- ./debian/shadowconfig.sh.orig 2001-05-29 23:20:22.000000000 -0700 -+++ ./debian/shadowconfig.sh 2003-06-23 16:35:38.000000000 -0700 -@@ -1,23 +1,28 @@ - #!/bin/bash --# turn shadow passwords on or off on a Debian system -+# -+# 'shadowconfig on' will turn shadow passwords on; -+# 'shadowconfig off' will turn shadow passwords off. -+# -+# shadowconfig will print an error message and exit with -+# a nonzero code if it finds anything awry. If that happens, -+# you should correct the error and run it again. -+# -+# Turning shadow passwords on when they are already on, or -+# off when they are already off, is harmless. -+# -+# Be aware that account expiration dates are only supported -+# by shadow passwords -- these dates will be lost when converting -+# from shadow to non-shadow passwords. If you need to save this -+# information, back up your /etc/shadow before turning off -+# shadow passwords. -+# - --set -e - --permfix () { -- [ -f $1 ] || return 0 -- chown root:shadow $1 -- chmod 2755 $1 --} --export -f permfix -+set -e - - shadowon () { - bash<<- EOF - set -e -- -- permfix /usr/X11R6/bin/xlock -- permfix /usr/X11R6/bin/xtrlock -- permfix /bin/vlock -- - pwck -q - grpck - pwconv -@@ -65,3 +70,4 @@ - echo Usage: $0 on \| off - ;; - esac -+ diff --git a/source/a/shadow/useradd b/source/a/shadow/useradd new file mode 100644 index 000000000..f3205e496 --- /dev/null +++ b/source/a/shadow/useradd @@ -0,0 +1,8 @@ +# useradd defaults file +GROUP=100 +HOME=/home +INACTIVE=-1 +EXPIRE= +SHELL=/bin/bash +SKEL=/etc/skel +CREATE_MAIL_SPOOL=yes diff --git a/source/a/smartmontools/smartmontools.SlackBuild b/source/a/smartmontools/smartmontools.SlackBuild index fd4fcf35b..5ebed962e 100755 --- a/source/a/smartmontools/smartmontools.SlackBuild +++ b/source/a/smartmontools/smartmontools.SlackBuild @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=5.38 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo smartmontools-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -40,39 +49,47 @@ mkdir -p $TMP $PKG cd $TMP rm -rf smartmontools-$VERSION -tar xvf $CWD/smartmontools-$VERSION.tar.* +tar xvf $CWD/smartmontools-$VERSION.tar.?z* || exit 1 cd smartmontools-$VERSION chown -R root:root . + ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --mandir=/usr/man \ --sysconfdir=/etc \ - $ARCH-slackware-linux -make -make install DESTDIR=$PKG + --build=$ARCH-slackware-linux + +make || exit 1 +make install DESTDIR=$PKG || exit 1 + # Not used on Slackware: rm -rf $PKG/etc/rc.d + mv $PKG/etc/smartd.conf $PKG/etc/smartd.conf.new gzip -9 $PKG/usr/man/man?/*.? mv $PKG/usr/share/doc $PKG/usr rmdir $PKG/usr/share -rm -f $PKG/usr/doc/smartmontools-$VERSION/CHANGELOG \ - $PKG/usr/doc/smartmontools-$VERSION/smartd.conf +rm -f $PKG/usr/doc/smartmontools-$VERSION/smartd.conf + ( cd $PKG find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null ) + mkdir -p $PKG/install zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc +# If there's a CHANGELOG, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGELOG ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGELOG | head -n 1000 > $DOCSDIR/CHANGELOG + touch -r CHANGELOG $DOCSDIR/CHANGELOG +fi + # Build the package: cd $PKG makepkg -l y -c n $TMP/smartmontools-$VERSION-$ARCH-$BUILD.txz -# Clean up the extra stuff: -if [ "$1" = "--cleanup" ]; then - rm -rf $TMP/smartmontools-$VERSION - rm -rf $PKG -fi diff --git a/source/a/syslinux/syslinux-3.52.tar.bz2.sign b/source/a/syslinux/syslinux-3.52.tar.bz2.sign deleted file mode 100644 index 1d319cd30..000000000 --- a/source/a/syslinux/syslinux-3.52.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.4.7 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQBG+aOayGugalF9Dw4RAtvoAJ93vpkYgJsPYBI95vXW1/qLIQC2lwCcCOPf -NhphOdhGCaUwMdqZH9tahC0= -=OS5y ------END PGP SIGNATURE----- diff --git a/source/k/linux-2.6.29.6.tar.sign b/source/a/syslinux/syslinux-3.84.tar.bz2.sign index fa432ec7d..987a8ed9b 100644 --- a/source/k/linux-2.6.29.6.tar.sign +++ b/source/a/syslinux/syslinux-3.84.tar.bz2.sign @@ -2,7 +2,7 @@ Version: GnuPG v1.4.9 (GNU/Linux) Comment: See http://www.kernel.org/signature.html for info -iD8DBQBKTUqsyGugalF9Dw4RArSTAJ41YYTLEModFq0I2OTLHXHC9g30BwCeNmzb -SkmIKll6naRQ31L1l0FP1wQ= -=oPqh +iD8DBQBLLBRQyGugalF9Dw4RAmsiAJ9geAzuilvLYCEc03sP1mJLG77UaQCeJlV+ +TgEccKCkyIkwwpBYDHesUjA= +=1AUa -----END PGP SIGNATURE----- diff --git a/source/a/syslinux/syslinux.SlackBuild b/source/a/syslinux/syslinux.SlackBuild index e084f96f5..1e7baad75 100755 --- a/source/a/syslinux/syslinux.SlackBuild +++ b/source/a/syslinux/syslinux.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,18 @@ PKGNAM=syslinux -VERSION=${VERSION:-3.52} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +VERSION=${VERSION:-3.84} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -48,18 +57,13 @@ find . \ # Build: make -j4 || exit 1 -make install-all INSTALLROOT=/tmp/package-syslinux -make mkdiskimage -make libsyslinux.a -cp -a unix/syslinux-nomtools mkdiskimage $PKG/usr/bin -chmod 755 $PKG/usr/bin/* +# Without -i, the following fails trying to install w32 junk: +make -i install INSTALLROOT=/tmp/package-syslinux -mkdir -p $PKG/usr/lib -cp -a libsyslinux.a $PKG/usr/lib -mkdir -p $PKG/usr/include -cp -a syslinux.h $PKG/usr/include +cp -a linux/syslinux-nomtools $PKG/usr/bin +chmod 755 $PKG/usr/bin/* -rm -rf $PKG/usr/lib/syslinux/com32 +rm -rf $PKG/usr/share/syslinux/com32 # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then @@ -77,14 +81,17 @@ if [ -d $PKG/usr/man ]; then fi # Add a documentation directory: -mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION/{cmenu,com32} cp -a \ BUGS COPYING NEWS README* TODO \ - distrib.doc isolinux.doc pxelinux.doc syslinux.doc \ - com32/LICENSE \ - memdisk/memdisk.doc \ - menu \ + doc \ $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a com32/LICENCE $PKG/usr/doc/${PKGNAM}-$VERSION/com32 +( cd com32/cmenu + cp -a \ + CHANGES HISTORY MANUAL MENU_FORMAT README TODO \ + $PKG/usr/doc/${PKGNAM}-$VERSION/cmenu +) mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/a/sysvinit-scripts/scripts/rc.6 b/source/a/sysvinit-scripts/scripts/rc.6 index 2d5028e35..e49160161 100644 --- a/source/a/sysvinit-scripts/scripts/rc.6 +++ b/source/a/sysvinit-scripts/scripts/rc.6 @@ -202,21 +202,21 @@ echo "Remounting root filesystem read-only." /bin/sync # Close any volumes opened by cryptsetup: -if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then +if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then cat /etc/crypttab | grep -v "^#" | grep -v "^$" | while read line; do # NOTE: we only support LUKS formatted volumes (except for swap)! LUKS=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f1 -d' ') DEV=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f2 -d' ') OPTS=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f4 -d' ') - if /sbin/cryptsetup.static isLuks $DEV 2>/dev/null ; then + if /sbin/cryptsetup isLuks $DEV 2>/dev/null ; then echo "Locking LUKS crypt volume '${LUKS}':" - /sbin/cryptsetup.static luksClose ${LUKS} + /sbin/cryptsetup luksClose ${LUKS} elif echo $OPTS | grep -wq swap ; then # If any of the volumes was used as encrypted swap, # then run mkswap on the underlying device - # in case other Linux installations on this computer should use it: echo "Erasing encrypted swap '${LUKS}' and restoring normal swap on ${DEV}:" - /sbin/cryptsetup.static remove ${LUKS} + /sbin/cryptsetup remove ${LUKS} mkswap $DEV fi done diff --git a/source/a/sysvinit-scripts/scripts/rc.M b/source/a/sysvinit-scripts/scripts/rc.M index fe2c9b6f0..ccdcb6f30 100644 --- a/source/a/sysvinit-scripts/scripts/rc.M +++ b/source/a/sysvinit-scripts/scripts/rc.M @@ -74,7 +74,7 @@ fi # If we are returning from single-user mode we will need to restart # udevd on systems that use udev: -if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems ; then +if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems ; then if ! grep -wq nohotplug /proc/cmdline ; then if [ -x /etc/rc.d/rc.udev ]; then /bin/sh /etc/rc.d/rc.udev start @@ -217,7 +217,7 @@ fi # If we're using udev, make /dev/cdrom and any other optical drive symlinks # if some udev rule hasn't made them already: -if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems; then +if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems; then if ! grep -wq nohotplug /proc/cmdline ; then if [ -x /lib/udev/rc.optical-symlinks -a -x /etc/rc.d/rc.udev ]; then /bin/sh /lib/udev/rc.optical-symlinks diff --git a/source/a/sysvinit-scripts/scripts/rc.S b/source/a/sysvinit-scripts/scripts/rc.S index a0072d286..7c5c43edb 100644 --- a/source/a/sysvinit-scripts/scripts/rc.S +++ b/source/a/sysvinit-scripts/scripts/rc.S @@ -7,8 +7,8 @@ PATH=/sbin:/usr/sbin:/bin:/usr/bin -# Mount /proc right away: -/sbin/mount -v proc /proc -n -t proc +# Try to mount /proc: +/sbin/mount -v proc /proc -n -t proc 2> /dev/null # Mount sysfs next, if the kernel supports it: if [ -d /sys ]; then @@ -29,7 +29,7 @@ fi # promise to list all of them), and make any additional device nodes that you # need in the /dev directory. Even USB and IEEE1394 devices will need to have # the modules loaded by hand if udev is not used with a 2.6 kernel. So use it. :-) -if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems ; then +if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems ; then if ! grep -wq nohotplug /proc/cmdline ; then if [ -x /etc/rc.d/rc.udev ]; then /bin/sh /etc/rc.d/rc.udev start @@ -59,7 +59,7 @@ if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then fi # Open any volumes created by cryptsetup: -if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then +if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then # First, check for device-mapper support. if ! grep -wq device-mapper /proc/devices ; then # If device-mapper exists as a module, try to load it. @@ -77,19 +77,19 @@ if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then if echo $OPTS | grep -wq ro ; then LUKSOPTS="${LUKSOPTS} --readonly" ; fi # Skip LUKS volumes that were already unlocked (in the initrd): - /sbin/cryptsetup.static status $LUKS 1>/dev/null 2>/dev/null && continue - if /sbin/cryptsetup.static isLuks $DEV 2>/dev/null ; then + /sbin/cryptsetup status $LUKS 1>/dev/null 2>/dev/null && continue + if /sbin/cryptsetup isLuks $DEV 2>/dev/null ; then echo "Unlocking LUKS crypt volume '${LUKS}' on device '$DEV':" if [ -n "${PASS}" ]; then if [ -f ${PASS} ]; then - /sbin/cryptsetup.static ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS + /sbin/cryptsetup ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS elif [ "${PASS}" != "none" ]; then # A password field of 'none' indicates a line for swap: - echo "${PASS}" | /sbin/cryptsetup.static ${LUKSOPTS} luksOpen $DEV $LUKS + echo "${PASS}" | /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS fi else for i in seq 1 3 ; do - /sbin/cryptsetup.static ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1 + /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1 [ $? -eq 0 ] && break done fi @@ -97,14 +97,14 @@ if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then # If any of the volumes is to be used as encrypted swap, # then encrypt it using a random key and run mkswap: echo "Creating encrypted swap on device '$DEV' mapped to '${LUKS}':" - /sbin/cryptsetup.static --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV + /sbin/cryptsetup --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV mkswap /dev/mapper/$LUKS fi done fi # Enable swapping: -/sbin/swapon -a +/sbin/swapon -a 2> /dev/null # Start FUSE, if requested: if [ -x /etc/rc.d/rc.fuse ]; then @@ -322,7 +322,7 @@ fi # Enable swapping again. This is needed in case a swapfile is used, # as it can't be enabled until the filesystem it resides on has been # mounted read-write. -/sbin/swapon -a +/sbin/swapon -a 2> /dev/null # Clean up some temporary files: rm -f /var/run/* /var/run/*/* /var/run/*/*/* /etc/nologin \ diff --git a/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild b/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild index 4b9eba043..537d8be98 100755 --- a/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild +++ b/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,7 +23,7 @@ VERSION=${VERSION:-1.2} ARCH=noarch -BUILD=${BUILD:-30} +BUILD=${BUILD:-32} CWD=$(pwd) TMP=${TMP:-/tmp} diff --git a/source/a/tar/tar-1.22-support_txz.diff b/source/a/tar/tar-1.22-support_txz.diff deleted file mode 100644 index 5104f5639..000000000 --- a/source/a/tar/tar-1.22-support_txz.diff +++ /dev/null @@ -1,11 +0,0 @@ -diff -Nur tar-1.22.orig/src/suffix.c tar-1.22/src/suffix.c ---- tar-1.22.orig/src/suffix.c 2009-03-05 01:04:13.000000000 -0600 -+++ tar-1.22/src/suffix.c 2009-05-06 15:59:10.695985191 -0500 -@@ -41,6 +41,7 @@ - { S(tlz, lzma) }, - { S(lzo, lzop) }, - { S(xz, xz) }, -+ { S(txz, xz) }, - #undef S - }; - diff --git a/source/a/tar/tar-1.23-support_txz.diff b/source/a/tar/tar-1.23-support_txz.diff new file mode 100644 index 000000000..efd720b55 --- /dev/null +++ b/source/a/tar/tar-1.23-support_txz.diff @@ -0,0 +1,11 @@ +diff -Nur tar-1.23.orig/src/suffix.c tar-1.23/src/suffix.c +--- tar-1.23.orig/src/suffix.c 2010-03-09 06:52:41.000000000 -0600 ++++ tar-1.23/src/suffix.c 2010-03-10 15:34:22.417696189 -0600 +@@ -43,6 +43,7 @@ + { S(tlz, LZMA) }, + { S(lzo, LZOP) }, + { S(xz, XZ) }, ++ { S(txz, XZ) }, + #undef S + #undef __CAT2__ + }; diff --git a/source/a/tar/tar.SlackBuild b/source/a/tar/tar.SlackBuild index 43181ccbe..21484f4cc 100755 --- a/source/a/tar/tar.SlackBuild +++ b/source/a/tar/tar.SlackBuild @@ -22,12 +22,20 @@ # Slackware build script for tar -VERSION=1.22 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=1.23 +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-tar @@ -41,6 +49,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi # This old version is the only one that won't clobber symlinks, e.g.: @@ -58,7 +68,7 @@ tar xvf $CWD/tar-1.13.tar.gz || exit 1 cd tar-1.13 || exit 1 zcat $CWD/tar-1.13.bzip2.diff.gz | patch -p1 --verbose || exit 1 # The original config.{guess,sub} do not work on x86_64 -cp -p /usr/share/libtool/config.{guess,sub} . +cp -p /usr/share/libtool/config/config.{guess,sub} . chown -R root:root . CFLAGS="$SLKCFLAGS" \ ./configure \ @@ -73,7 +83,7 @@ chmod 0755 $PKG/bin/tar-1.13 cd $TMP rm -rf tar-$VERSION -tar xvf $CWD/tar-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/tar-$VERSION.tar.xz || exit 1 cd tar-$VERSION || exit 1 chown -R root:root . find . \ @@ -89,7 +99,7 @@ zcat $CWD/tar.norecordsizespam.diff.gz | patch -p1 --verbose || exit 1 zcat $CWD/tar.nolonezero.diff.gz | patch -p1 --verbose || exit 1 # Add support for *.txz files (our packages) -zcat $CWD/tar-1.22-support_txz.diff.gz | patch -p1 --verbose || exit1 +zcat $CWD/tar-1.23-support_txz.diff.gz | patch -p1 --verbose || exit1 CFLAGS="$SLKCFLAGS" \ ./configure \ @@ -103,8 +113,10 @@ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) mv $PKG/usr/bin/tar $PKG/bin diff --git a/source/a/tar/tar.nolonezero.diff b/source/a/tar/tar.nolonezero.diff index 3c6f6f97b..0209c692a 100644 --- a/source/a/tar/tar.nolonezero.diff +++ b/source/a/tar/tar.nolonezero.diff @@ -1,24 +1,25 @@ ---- ./src/list.c.orig 2004-05-10 04:49:09.000000000 -0700 -+++ ./src/list.c 2004-06-06 13:13:23.000000000 -0700 +diff -Nur tar-1.23.orig//src/list.c tar-1.23//src/list.c +--- tar-1.23.orig//src/list.c 2010-01-26 05:28:09.000000000 -0600 ++++ tar-1.23//src/list.c 2010-03-15 23:46:19.841670026 -0500 @@ -138,6 +138,14 @@ if (!ignore_zeros_option) { + -+ /* -+ * According to POSIX tar specs, this is wrong, but on the web -+ * there are some tar specs that can trigger this, and some tar -+ * implementations create tars according to that spec. For now, -+ * let's not be pedantic about issuing the warning. -+ */ -+#if 0 ++ /* ++ * According to POSIX tar specs, this is wrong, but on the web ++ * there are some tar specs that can trigger this, and some tar ++ * implementations create tars according to that spec. For now, ++ * let's not be pedantic about issuing the warning. ++ */ ++#if 0 char buf[UINTMAX_STRSIZE_BOUND]; - status = read_header (false); -@@ -145,6 +153,7 @@ - break; - WARN ((0, 0, _("A lone zero block at %s"), - STRINGIFY_BIGINT (current_block_ordinal (), buf))); + status = read_header (¤t_header, ¤t_stat_info, +@@ -147,6 +155,7 @@ + WARNOPT (WARN_ALONE_ZERO_BLOCK, + (0, 0, _("A lone zero block at %s"), + STRINGIFY_BIGINT (current_block_ordinal (), buf))); +#endif break; } diff --git a/source/a/tar/tar.norecordsizespam.diff b/source/a/tar/tar.norecordsizespam.diff index b7d1b7a9f..0a1f4e1df 100644 --- a/source/a/tar/tar.norecordsizespam.diff +++ b/source/a/tar/tar.norecordsizespam.diff @@ -1,15 +1,16 @@ ---- ./src/buffer.c.orig 2009-03-05 01:04:13.000000000 -0600 -+++ ./src/buffer.c 2009-03-09 20:17:50.000000000 -0500 -@@ -688,7 +688,7 @@ +diff -Nur tar-1.23.orig//src/buffer.c tar-1.23/src/buffer.c +--- tar-1.23.orig//src/buffer.c 2010-03-09 06:52:41.000000000 -0600 ++++ tar-1.23/src/buffer.c 2010-03-15 23:47:30.122668444 -0500 +@@ -734,7 +734,7 @@ more = record_start->buffer + status; left = record_size - status; - if (left && left % BLOCKSIZE == 0 + /* if (left && left % BLOCKSIZE == 0 && verbose_option - && record_start_block == 0 && status != 0) - { -@@ -698,7 +698,7 @@ + && record_start_block == 0 && status != 0 + && archive_is_dev ()) +@@ -745,7 +745,7 @@ "Record size = %lu blocks", rsize), rsize)); diff --git a/source/a/udev/config/rc.d/rc.udev.new b/source/a/udev/config/rc.d/rc.udev.new index 8c238b0dd..40f38d1de 100644 --- a/source/a/udev/config/rc.d/rc.udev.new +++ b/source/a/udev/config/rc.d/rc.udev.new @@ -11,6 +11,18 @@ OPT="" # remove trailing slash from udev_root UDEV_ROOT=$(echo "${udev_root}" |sed 's/\/*$//') +check_mounted() { + grep -E -q "^[^[:space:]]+ $1 $2" /proc/mounts + return $? +} + +mount_devpts() { + if ! check_mounted $UDEV_ROOT/pts devpts ; then + mkdir $UDEV_ROOT/pts 2> /dev/null + mount -n -o mode=0620,gid=5 -t devpts devpts $UDEV_ROOT/pts + fi +} + case "$1" in start) # Sanity check #1, udev requires that the kernel support tmpfs: @@ -23,8 +35,8 @@ case "$1" in # Sanity check #2, make sure that a 2.6.x kernel is new enough: if [ "$(uname -r | cut -f 1,2 -d .)" = "2.6" ]; then - if [ "$(uname -r | cut -f 3 -d . | sed 's/[^[:digit:]].*//')" -lt "15" ]; then - echo "Sorry, but you need a 2.6.15+ kernel to use udev." + if [ "$(uname -r | cut -f 3 -d . | sed 's/[^[:digit:]].*//')" -lt "27" ]; then + echo "Sorry, but you need a 2.6.27+ kernel to use udev." echo "Your kernel version is only $(uname -r)." echo echo "FATAL: Refusing to run /etc/rc.d/rc.udev." @@ -48,45 +60,59 @@ case "$1" in echo "" > /proc/sys/kernel/hotplug fi - # if udevd is already running, rc.udev start will try to re-run - # failed events. Else, it will start udevd. - if ps axc | grep -q udevd ; then - OPT="--type=failed $OPT" - ( cd ${UDEV_ROOT}/.udev - for TMPFILE in tmp-rules-*.rules ; do - mv $TMPFILE /etc/udev/rules.d/${TMPFILE/tmp-rules--/} 2>/dev/null - done - ) - else - # Mount tmpfs on $UDEV_ROOT: - if ! grep -E -q "^[^[:space:]]+ $UDEV_ROOT tmpfs" /proc/mounts; then + if grep -qw devtmpfs /proc/filesystems ; then + if ! check_mounted $UDEV_ROOT devtmpfs ; then # umount shm if needed - if grep -E -q "^[^[:space:]]+ $UDEV_ROOT/shm tmpfs" /proc/mounts; then - umount -l $UDEV_ROOT/shm - fi + check_mounted $UDEV_ROOT/shm tmpfs && umount -l $UDEV_ROOT/shm # Umount pts if needed, we will remount it later: - if grep -E -q "^[^[:space:]]+ $UDEV_ROOT/pts devpts" /proc/mounts; then - umount -l $UDEV_ROOT/pts + check_mounted $UDEV_ROOT/pts devpts && umount -l $UDEV_ROOT/pts + + # Mount tmpfs on $UDEV_ROOT: + mount -n -t devtmpfs devtmpfs $UDEV_ROOT + fi + else + # Mount tmpfs on $UDEV_ROOT: + if ! check_mounted $UDEV_ROOT tmpfs ; then + # umount shm if needed + check_mounted $UDEV_ROOT/shm tmpfs && umount -l $UDEV_ROOT/shm + + # Umount pts if needed, we will remount it later: + check_mounted $UDEV_ROOT/pts devpts && umount -l $UDEV_ROOT/pts + + # Mount tmpfs on $UDEV_ROOT: + # the -n is because we don't want $UDEV_ROOT umounted when + # someone (rc.[06]) calls umount -a + mount -n -o mode=0755 -t tmpfs tmpfs $UDEV_ROOT + fi + fi + # Mount devpts + mount_devpts - # Mount tmpfs on $UDEV_ROOT: - # the -n is because we don't want $UDEV_ROOT umounted when - # someone (rc.[06]) calls umount -a - mount -n -o mode=0755 -t tmpfs tmpfs $UDEV_ROOT + # Start udevd. + /sbin/udevd --daemon 2>/dev/null - # Remount pts: - mkdir $UDEV_ROOT/pts 2> /dev/null - mount -n -o mode=0620,gid=5 -t devpts devpts $UDEV_ROOT/pts - fi + # If udevd was already running, then it will return !=0 exit code, + # so we'll try to re-run failed events + if [ $? != 0 ]; then + OPT="--type=failed $OPT" + ( cd ${UDEV_ROOT}/.udev + for TMPFILE in tmp-rules-*.rules ; do + mv $TMPFILE /etc/udev/rules.d/${TMPFILE/tmp-rules--/} 2>/dev/null + done + ) + else # udev is just now being started, so we'll do some initial setup: - # Add the static nodes to $UDEV_ROOT: - cp --preserve=all --recursive --remove-destination /lib/udev/devices/* $UDEV_ROOT + # Set STARTUP=1 in the environment + /sbin/udevadm control --property=STARTUP=1 - # Start udevd: - echo "Starting udevd: /sbin/udevd --daemon" - /sbin/udevd --daemon + # Set OPT="--action=add" to generate add events on coldplug + OPT="--action=add" + # Add the static nodes to $UDEV_ROOT: + cp --preserve=all --recursive --remove-destination /lib/udev/devices/* $UDEV_ROOT + # Create rootdev rules DEVICENUMBER=$( /bin/stat -c %d / ) MAJORNUMBER=$(($DEVICENUMBER / 256)) @@ -99,9 +125,15 @@ case "$1" in echo "Triggering udev events: /sbin/udevadm trigger $OPT" # Call udevtrigger and udevsettle to do the device configuration: /sbin/udevadm trigger $OPT && /sbin/udevadm settle --timeout=120 + # Unset STARTUP=1 in the environment + /sbin/udevadm control --property=STARTUP= ;; stop) + echo "Stopping udevd is STRONGLY discouraged and not supported." + echo "If you are sure you want to do this, use 'force-stop' instead." + ;; + force-stop) echo "Stopping udevd" if [ -e /proc/sys/kernel/hotplug ]; then echo /sbin/hotplug > /proc/sys/kernel/hotplug @@ -109,6 +141,10 @@ case "$1" in killall udevd ;; restart) + echo "Restarting udevd is STRONGLY discouraged and not supported." + echo "If you are sure you want to do this, use 'force-restart' instead." + ;; + force-restart) echo "Restarting udevd" killall udevd sleep 5 diff --git a/source/a/udev/config/rules.d/59-non-libata-devices.rules b/source/a/udev/config/rules.d/59-non-libata-devices.rules new file mode 100644 index 000000000..4b1238a43 --- /dev/null +++ b/source/a/udev/config/rules.d/59-non-libata-devices.rules @@ -0,0 +1,44 @@ +# Support for the deprecated IDE devices has been removed from the +# default set of rules shipped with udev, but some administrators +# might want (or need) the old ata drivers and thus build a custom +# kernel, so we'll carry these on our own for now... + +############################################################################# + +# Old 50-udev-default.rules + +# floppy +KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="floppy" + +# cdrom +SUBSYSTEM=="block", KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="cdrom", GROUP="cdrom" + +############################################################################# + +# Old 60-persistent-storage.rules + +# never access non-cdrom removable ide devices, the drivers are causing event loops on open() +KERNEL=="hd*[!0-9]", ATTR{removable}=="1", SUBSYSTEMS=="ide", ATTRS{media}=="disk|floppy", GOTO="old_persistent_storage_end" +KERNEL=="hd*[0-9]", ATTRS{removable}=="1", GOTO="old_persistent_storage_end" + +# by-id (hardware serial number) +KERNEL=="hd*[!0-9]", IMPORT{program}="ata_id --export $tempnode" +KERNEL=="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_SERIAL}" +KERNEL=="hd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_SERIAL}-part%n" + +LABEL="old_persistent_storage_end" + +############################################################################# + +# Old ide stuff from our custom 65-permissions.rules + +# permissions for IDE floppy devices +KERNEL=="hd*[!0-9]", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", SYMLINK+="floppy floppy-%k" +KERNEL=="hd*[0-9]", ATTRS{media}=="floppy", ATTRS{removable}=="1", SYMLINK+="floppy-%k" + +# put all removable devices in group "plugdev" +KERNEL=="hd*[!0-9]", ATTR{removable}=="1", GROUP="plugdev" +KERNEL=="hd*[0-9]", ATTRS{removable}=="1", GROUP="plugdev" + +############################################################################# + diff --git a/source/a/udev/config/rules.d/65-permissions.rules b/source/a/udev/config/rules.d/65-permissions.rules index b0cfb2590..6f82b0f36 100644 --- a/source/a/udev/config/rules.d/65-permissions.rules +++ b/source/a/udev/config/rules.d/65-permissions.rules @@ -12,15 +12,7 @@ # all disks with group disk KERNEL!="fd*", SUBSYSTEM=="block", GROUP="disk" -# permissions for IDE floppy devices -KERNEL=="hd*[!0-9]", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", \ - SYMLINK+="floppy floppy-%k", OPTIONS+="ignore_remove" -KERNEL=="hd*[0-9]", ATTRS{media}=="floppy", ATTRS{removable}=="1", \ - SYMLINK+="floppy-%k", OPTIONS+="ignore_remove" - # put all removable devices in group "plugdev" -KERNEL=="hd*[!0-9]", ATTR{removable}=="1", GROUP="plugdev" -KERNEL=="hd*[0-9]", ATTRS{removable}=="1", GROUP="plugdev" KERNEL=="sd*[!0-9]", ATTR{removable}=="1", GROUP="plugdev" KERNEL=="sd*[0-9]", ATTRS{removable}=="1", GROUP="plugdev" @@ -44,9 +36,6 @@ SUBSYSTEMS=="scsi", KERNEL=="s[gt][0-9]*", ATTRS{type}=="5", \ # Make DRI video devices usable by anyone in group "video": KERNEL=="card[0-9]*",GROUP:="video" -# alsa devices -SUBSYSTEM=="sound", GROUP="audio" - # Make the real time clock readable by all, and writable by root: KERNEL=="rtc|rtc0", MODE="0644" diff --git a/source/a/udev/rule_generator.diff b/source/a/udev/rule_generator.diff index 0ff218a6c..f3f67516d 100644 --- a/source/a/udev/rule_generator.diff +++ b/source/a/udev/rule_generator.diff @@ -1,6 +1,6 @@ -diff -Naur udev-114/extras/rule_generator/write_cd_rules udev-114slk/extras/rule_generator/write_cd_rules ---- udev-114/extras/rule_generator/write_cd_rules 2007-08-05 09:08:47.000000000 -0300 -+++ udev-114slk/extras/rule_generator/write_cd_rules 2007-08-22 20:17:24.000000000 -0300 +diff -Naur udev.orig/extras/rule_generator/write_cd_rules udev/extras/rule_generator/write_cd_rules +--- udev.orig/extras/rule_generator/write_cd_rules 2009-05-19 00:24:39.000000000 -0300 ++++ udev/extras/rule_generator/write_cd_rules 2009-05-19 01:02:17.000000000 -0300 @@ -3,7 +3,8 @@ # This script is run if an optical drive lacks a rule for persistent naming. # @@ -11,13 +11,13 @@ diff -Naur udev-114/extras/rule_generator/write_cd_rules udev-114slk/extras/rule # # (C) 2006 Marco d'Itri <md@Linux.IT> # -@@ -97,18 +98,59 @@ +@@ -96,18 +97,57 @@ choose_rules_file link_num=$(find_next_available 'cdrom[0-9]*') +[ "$link_num" = "" ] && link_num=0 - match="ENV{ID_CDROM}==\"?*\", $RULE" + match="SUBSYSTEM==\"block\", ENV{ID_CDROM}==\"?*\", $RULE" comment="$ID_MODEL ($ID_PATH)" - @@ -73,8 +73,6 @@ diff -Naur udev-114/extras/rule_generator/write_cd_rules udev-114slk/extras/rule + fi + fi + fi -+ -+ + echo >> $RULES_FILE unlock_rules_file - diff --git a/source/a/udev/udev-153.tar.sign b/source/a/udev/udev-153.tar.sign new file mode 100644 index 000000000..193f3a0e7 --- /dev/null +++ b/source/a/udev/udev-153.tar.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLzqFNyGugalF9Dw4RApGYAKCVo2YvsfeOD/ozq/rsURNM/AoxrwCcCJl1 +YD0LnOVyqilDyMQdOk2VA7o= +=hHbP +-----END PGP SIGNATURE----- diff --git a/source/a/udev/udev.SlackBuild b/source/a/udev/udev.SlackBuild index 0c6327486..e891fca35 100755 --- a/source/a/udev/udev.SlackBuild +++ b/source/a/udev/udev.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,13 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=${VERSION:-141} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +VERSION=${VERSION:-$(echo udev-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -41,7 +49,7 @@ rm -rf $PKG mkdir -p $TMP $PKG/lib/udev cd $TMP rm -rf udev-$VERSION -tar xvf $CWD/udev-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/udev-$VERSION.tar.xz || exit 1 cd udev-$VERSION || exit 1 chown -R root:root . find . \ @@ -50,31 +58,31 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -zcat $CWD/rule_generator.diff.gz | patch -p1 --verbose || exit 1 +# Fixup the rule generator for our use +zcat $CWD/rule_generator.diff.gz | patch -p1 || exit 1 +# static libudev is needed for lvm2 ./configure \ + --enable-static \ --prefix=/usr \ - --exec-prefix=/ \ --sysconfdir=/etc \ + --sbindir=/sbin \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --with-rootlibdir=/lib${LIBDIRSUFFIX} \ + --libexecdir=/lib/udev \ + --disable-introspection \ --mandir=/usr/man \ - --with-libdir-name=lib${LIBDIRSUFFIX} \ + --docdir=/usr/doc/udev-$VERSION \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ - xargs strip --strip-unneeded 2> /dev/null || true - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ - xargs strip --strip-unneeded 2> /dev/null -) +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true -# scsi_id and vol_id are needed by multipath -( cd $PKG/sbin - ln -s ../lib/udev/scsi_id scsi_id - ln -s ../lib/udev/vol_id vol_id -) +# scsi_id is needed by multipath +( cd $PKG/sbin ; ln -s ../lib/udev/scsi_id scsi_id ) mkdir -p \ $PKG/etc/modprobe.d \ @@ -84,15 +92,10 @@ mkdir -p \ # Yes, these will clobber existing config files. cp -a $CWD/config/udev.conf $PKG/etc/udev/udev.conf + # Copy Slackware custom rules cp -a $CWD/config/rules.d/* $PKG/lib/udev/rules.d/ -# Copy some files from upstream -cp -a rules/packages/40-alsa.rules $PKG/lib/udev/rules.d/ -cp -a rules/packages/40-isdn.rules $PKG/lib/udev/rules.d/ -cp -a rules/packages/40-zaptel.rules $PKG/lib/udev/rules.d/ -cp -a rules/packages/40-infiniband.rules $PKG/lib/udev/rules.d/ -#cp -a rules/packages/40-pilot-links.rules $PKG/etc/udev/rules.d/ -#cp -a rules/packages/64-md-raid.rules $PKG/etc/udev/rules.d/ + # Now the init script and module-init-tools stuff cp -a $CWD/config/rc.d/rc.udev.new $PKG/etc/rc.d/rc.udev.new cp -a $CWD/config/modprobe.d/* $PKG/etc/modprobe.d @@ -100,7 +103,7 @@ cp -a $CWD/config/modprobe.d/* $PKG/etc/modprobe.d chown -R root:root $PKG/etc find $PKG/etc -type f -exec chmod 644 {} \; find $PKG/etc -type d -exec chmod 755 {} \; -chmod 755 $PKG/etc/rc.d/rc.udev.new +chmod 0755 $PKG/etc/rc.d/rc.udev.new # Add extra device nodes to the package that udev doesn't make: tar xvf $CWD/udev-fixed-devices.tar.gz -C $PKG @@ -112,11 +115,21 @@ done chown -R root:root $PKG/lib/udev chmod 755 $PKG/lib/udev/* +# Move the pkgconfig file to where we expect it +mv $PKG/usr/share/pkgconfig/* $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig +rmdir $PKG/usr/share/pkgconfig + +# Kill the ConsoleKit stuff +rm -rf $PKG/usr/lib/ConsoleKit ; rmdir $PKG/usr/lib 2>/dev/null + mkdir -p $PKG/usr/doc/udev-$VERSION cp -a \ - COPYING* FAQ README* TODO RELEASE-NOTES docs \ + COPYING* README* TODO \ $PKG/usr/doc/udev-$VERSION +# Don't package the API docs: +rm -rf $PKG/usr/share/gtk-doc ; rmdir $PKG/usr/share 2>/dev/null + # Compress and fix manpage symlinks: if [ -d $PKG/usr/man ]; then ( cd $PKG/usr/man diff --git a/source/a/usb_modeswitch/doinst.sh b/source/a/usb_modeswitch/doinst.sh new file mode 100644 index 000000000..1ed6e1740 --- /dev/null +++ b/source/a/usb_modeswitch/doinst.sh @@ -0,0 +1,14 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} +config etc/usb_modeswitch.conf.new + diff --git a/source/a/usb_modeswitch/slack-desc b/source/a/usb_modeswitch/slack-desc new file mode 100644 index 000000000..9581428b2 --- /dev/null +++ b/source/a/usb_modeswitch/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +usb_modeswitch: usb_modeswitch (mode switching tool for multiple mode USB devices) +usb_modeswitch: +usb_modeswitch: USB-ModeSwitch is (surprise!) a small mode switching tool for +usb_modeswitch: controlling "flip flop" (multiple device) USB gear. These devices +usb_modeswitch: initially appear to be USB storage, typically containing the MS +usb_modeswitch: Windows drivers for whatever the real purpose of the device is, such +usb_modeswitch: as a wireless USB modem. To use these devices with Linux, they need +usb_modeswitch: to be told to switch out of storage mode, which is the purpose of the +usb_modeswitch: USB-ModeSwitch utility. +usb_modeswitch: +usb_modeswitch: Homepage: http://www.draisberghof.de/usb_modeswitch diff --git a/source/a/usb_modeswitch/usb_modeswitch.SlackBuild b/source/a/usb_modeswitch/usb_modeswitch.SlackBuild new file mode 100755 index 000000000..f4e6569ef --- /dev/null +++ b/source/a/usb_modeswitch/usb_modeswitch.SlackBuild @@ -0,0 +1,122 @@ +#!/bin/sh + +# Slackware build script for usb_modeswitch. + +# Copyright 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2010 David Somero, Athens, TN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=usb_modeswitch +VERSION=${VERSION:-1.1.2} +DATAVER=${DATAVER:-20100418} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +# Upstream is playing guess the program name. +SRCPKGNAM=$(echo $PKGNAM | tr _ -) + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $SRCPKGNAM-$VERSION +tar xvf $CWD/$SRCPKGNAM-$VERSION.tar.?z* || exit 1 +cd $SRCPKGNAM-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +make clean +gcc $SLKCFLAGS $LDFLAGS -lusb -Wall -o usb_modeswitch usb_modeswitch.c || exit 1 + +install -D -s -m 0755 usb_modeswitch $PKG/usr/sbin/usb_modeswitch +install -D -m 0755 usb_modeswitch.tcl $PKG/lib/udev/usb_modeswitch +install -D -m 0644 usb_modeswitch.conf $PKG/etc/usb_modeswitch.conf.new + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + COPYING* README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +# Now, install the data pack: +cd $TMP +rm -rf usb-modeswitch-data-${DATAVER} +tar xvf $CWD/usb-modeswitch-data-${DATAVER}.tar.?z* || exit 1 +cd usb-modeswitch-data-${DATAVER} || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; +install -D -m 0644 40-usb_modeswitch.rules $PKG/lib/udev/rules.d/40-usb_modeswitch.rules +mkdir -p $PKG/etc +cp -a usb_modeswitch.d $PKG/etc +mkdir -p $PKG/usr/doc/usb-modeswitch-data-${DATAVER} +cat ChangeLog | head -n 1000 > $PKG/usr/doc/usb-modeswitch-data-${DATAVER}/ChangeLog +touch -r ChangeLog $PKG/usr/doc/usb-modeswitch-data-${DATAVER}/ChangeLog +cp -a \ + COPYING* README* \ + $PKG/usr/doc/usb-modeswitch-data-${DATAVER} + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/a/usbutils/usbutils.SlackBuild b/source/a/usbutils/usbutils.SlackBuild index dcb14b466..7263b8647 100755 --- a/source/a/usbutils/usbutils.SlackBuild +++ b/source/a/usbutils/usbutils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.82} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo usbutils-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-usbutils @@ -40,6 +49,9 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -88,6 +100,10 @@ mv $PKG/sbin/update-usbids.sh $PKG/usr/sbin/update-usbids.sh # upstream name available there too... ( cd $PKG/sbin ; ln -sf /usr/sbin/update-usbids.sh . ) +# Move the pkgconfig directory to @libdir@ instead of @datadir@ +mkdir $PKG/usr/lib${LIBDIRSUFFIX} +mv $PKG/usr/share/pkgconfig $PKG/usr/lib${LIBDIRSUFFIX} + find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -108,9 +124,17 @@ fi mkdir -p $PKG/usr/doc/usbutils-$VERSION cp -a \ - AUTHORS COPYING ChangeLog NEWS README \ + AUTHORS COPYING NEWS README \ $PKG/usr/doc/usbutils-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/a/util-linux-ng/setserial-undef_TIOCGHAYESESP.diff b/source/a/util-linux-ng/setserial-undef_TIOCGHAYESESP.diff new file mode 100644 index 000000000..97f078437 --- /dev/null +++ b/source/a/util-linux-ng/setserial-undef_TIOCGHAYESESP.diff @@ -0,0 +1,13 @@ +diff -Nur setserial-2.17.orig/setserial.c setserial-2.17/setserial.c +--- setserial-2.17.orig/setserial.c 2000-01-27 09:40:52.000000000 -0600 ++++ setserial-2.17/setserial.c 2010-03-29 23:05:27.093878048 -0500 +@@ -26,6 +26,9 @@ + + #include "version.h" + ++/* http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=f53a2ade0bb9f2a81f473e6469155172a96b7c38 */ ++#undef TIOCGHAYESESP ++ + static char version_str[] = "setserial version " SETSERIAL_VERSION ", " + SETSERIAL_DATE; + diff --git a/source/a/util-linux-ng/util-linux-ng.SlackBuild b/source/a/util-linux-ng/util-linux-ng.SlackBuild index 2c2ea55e5..386487aba 100755 --- a/source/a/util-linux-ng/util-linux-ng.SlackBuild +++ b/source/a/util-linux-ng/util-linux-ng.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,14 +22,23 @@ # Slackware build script for util-linux-ng -VERSION=${VERSION:-2.14.2} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo util-linux-ng*.tar.?z* | cut -d - -f 4 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} ADJTIMEXVERS=1.23 SETSERIALVERS=2.17 ZIPTOOLVERS=1.4.0 +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -39,17 +48,20 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-util-linux-ng + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP || exit 1 rm -rf util-linux-ng-$VERSION -tar xvf $CWD/util-linux-ng-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/util-linux-ng-$VERSION.tar.xz || exit 1 cd util-linux-ng-$VERSION || exit 1 chown -R root.root . find . \ @@ -84,6 +96,7 @@ CFLAGS="$SLKCFLAGS" \ --mandir=/usr/man \ --infodir=/usr/info \ --docdir=/usr/doc/util-linux-ng-$VERSION \ + --disable-static \ --enable-arch \ --enable-agetty \ --disable-init \ @@ -99,12 +112,24 @@ CFLAGS="$SLKCFLAGS" \ --enable-wall \ --enable-write \ --enable-use-tty-group \ + --enable-libblkid \ + --enable-libuuid \ + --disable-uuidd \ --build=$ARCH-slackware-linux \ - --host=$ARCH-slackware-linux \ || exit 1 make || exit 1 -make install DESTDIR=$PKG +make install DESTDIR=$PKG || make install DESTDIR=$PKG + +# Move the libblkid and libuuid libraries to /lib${LIBSUFFIX} +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + mv libblkid.so.1* $PKG/lib${LIBDIRSUFFIX} + mv libuuid.so.1* $PKG/lib${LIBDIRSUFFIX} + rm -f libblkid.so libuuid.so + ln -sf /lib${LIBDIRSUFFIX}/libblkid.so.1 libblkid.so + ln -sf /lib${LIBDIRSUFFIX}/libuuid.so.1 libuuid.so +) # Moving things around that have been in the same place # for 15 years is, IMHO, not a wise idea AT ALL. @@ -124,12 +149,11 @@ fi cat ./sys-utils/rdev > $PKG/sbin/rdev chown root:root $PKG/sbin/rdev chmod 755 $PKG/sbin/rdev -#cat ./sys-utils/rdev.8 | gzip -9c > $PKG/usr/man/man8/rdev.8.gz # Build ziptool cd $TMP || exit 1 rm -rf ziptool-$ZIPTOOLVERS -tar xvf $CWD/ziptool-$ZIPTOOLVERS.tar.bz2 || exit 1 +tar xvf $CWD/ziptool-$ZIPTOOLVERS.tar.xz || exit 1 cd ziptool-$ZIPTOOLVERS || exit 1 zcat $CWD/ziptool-fix_build.patch.gz | patch -p1 || exit 1 mkdir scsi @@ -159,7 +183,7 @@ cat strings.1 | gzip -9c > $PKG/usr/man/man1/strings.1.gz # installing just the A series will not have a hostname (null): cd $TMP || exit 1 rm -rf net-tools-1.60 -tar xvf $CWD/net-tools-1.60.tar.bz2 +tar xvf $CWD/net-tools-1.60.tar.xz cd net-tools-1.60 zcat $CWD/net-tools_1.60-19.diff.gz | patch -p1 || exit zcat $CWD/net-tools.diff.gz | patch -p1 || exit @@ -205,8 +229,9 @@ tar xvf $CWD/setserial-$SETSERIALVERS.tar.gz || exit 1 cd setserial-$SETSERIALVERS || exit 1 chown -R root:root . zcat $CWD/setserial-rc.serial.diff.gz | patch -E -p1 --verbose || exit 1 +zcat $CWD/setserial-undef_TIOCGHAYESESP.diff.gz | patch -E -p1 --verbose || exit 1 # The original config.{guess,sub} do not work on x86_64 -cp -p /usr/share/libtool/config.{guess,sub} . +cp -p /usr/share/libtool/config/config.{guess,sub} . ./configure --prefix=/usr || exit 1 make || exit 1 strip setserial @@ -272,7 +297,8 @@ rm $PKG/usr/info/dir gzip -9 $PKG/usr/info/* mkdir -p $PKG/usr/doc/util-linux-ng-$VERSION -cp ABOUT-NLS AUTHORS COPYING DEPRECATED NEWS README* TODO docs/* \ +cp -a AUTHORS COPYING DEPRECATED NEWS README* TODO \ + docs/v${VERSION}-ReleaseNotes \ $PKG/usr/doc/util-linux-ng-$VERSION mkdir $PKG/install diff --git a/source/a/xfsprogs/xfsprogs.SlackBuild b/source/a/xfsprogs/xfsprogs.SlackBuild index 7ef1c07c6..cf832cfb9 100755 --- a/source/a/xfsprogs/xfsprogs.SlackBuild +++ b/source/a/xfsprogs/xfsprogs.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.0.1 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo xfsprogs-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-xfsprogs @@ -40,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -85,11 +97,28 @@ mv $PKG/usr/doc/xfsprogs $PKG/usr/doc/xfsprogs-$VERSION cp -a README doc/COPYING doc/CREDITS doc/PORTING \ $PKG/usr/doc/xfsprogs-$VERSION +rm -f $PKG/usr/doc/xfsprogs-$VERSION/CHANGES.gz + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r doc/CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat doc/CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r doc/CHANGES $DOCSDIR/CHANGES +fi + +# The install location for many binaries changed with the update to 3.1.1, +# but it seems like the wrong place to put most of this stuff: +mkdir -p $PKG/usr/sbin +mv $PKG/sbin/xfs_* $PKG/usr/sbin +mv $PKG/usr/sbin/xfs_repair $PKG/sbin + # Remove bogus files: rm -f $PKG/lib${LIBDIRSUFFIX}/*.a $PKG/lib${LIBDIRSUFFIX}/*.so \ $PKG/lib${LIBDIRSUFFIX}/*.la $PKG/usr/lib${LIBDIRSUFFIX}/*.la # Make /usr/lib/libhandle.so a symlink to /lib/libhandle.so.1: if [ -f $PKG/lib${LIBDIRSUFFIX}/libhandle.so.1 ]; then + mkdir -p $PKG/usr/lib${LIBDIRSUFFIX} ( cd $PKG/usr/lib${LIBDIRSUFFIX} rm -f libhandle.so ln -sf /lib${LIBDIRSUFFIX}/libhandle.so.1 libhandle.so diff --git a/source/a/xz/xz.SlackBuild b/source/a/xz/xz.SlackBuild index 240334178..205a12ef6 100755 --- a/source/a/xz/xz.SlackBuild +++ b/source/a/xz/xz.SlackBuild @@ -22,10 +22,19 @@ # SUCH DAMAGE. PRGNAM=xz -VERSION=${VERSION:-4.999.8beta} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-4.999.9beta} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + case "$ARCH" in i486) SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -75,6 +84,7 @@ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --docdir=/usr/doc/xz-$VERSION \ --sysconfdir=/etc \ --mandir=/usr/man \ --enable-shared \ diff --git a/source/ap/alsa-utils/alsa-utils.SlackBuild b/source/ap/alsa-utils/alsa-utils.SlackBuild index c918ba526..14398aab0 100755 --- a/source/ap/alsa-utils/alsa-utils.SlackBuild +++ b/source/ap/alsa-utils/alsa-utils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,33 +21,47 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.0.18 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo alsa-utils-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-alsa-utils + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" - LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" +elif [ "$ARCH" = "arm" ]; then + SLKCFLAGS="-O2 -march=armv4 -mtune=xscale" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "armel" ]; then + SLKCFLAGS="-O2 -march=armv4t" + LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-alsa-utils - rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP rm -rf alsa-utils-$VERSION -tar xvf $CWD/alsa-utils-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/alsa-utils-$VERSION.tar.?z* || exit 1 cd alsa-utils-$VERSION || exit 1 zcat $CWD/alsa-utils.alsaconf.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit @@ -92,12 +106,20 @@ fi mkdir -p $PKG/usr/doc/alsa-utils-$VERSION cp -a \ - COPYING ChangeLog INSTALL TODO \ + COPYING INSTALL TODO \ seq/aconnect/README.aconnect \ seq/aseqnet/README.aseqnet \ $PKG/usr/doc/alsa-utils-$VERSION cp -a alsamixer/README $PKG/usr/doc/alsa-utils-$VERSION/README.alsamixer +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/ap/alsa-utils/alsa-utils.alsaconf.diff b/source/ap/alsa-utils/alsa-utils.alsaconf.diff index c20bf72e7..92e05b832 100644 --- a/source/ap/alsa-utils/alsa-utils.alsaconf.diff +++ b/source/ap/alsa-utils/alsa-utils.alsaconf.diff @@ -1,27 +1,6 @@ ---- ./alsaconf/alsaconf.in.orig 2007-05-31 03:07:21.000000000 -0500 -+++ ./alsaconf/alsaconf.in 2007-06-05 19:01:03.000000000 -0500 -@@ -50,7 +50,9 @@ - } - - # Check for GNU/Linux distributions --if [ -f /etc/SuSE-release ]; then -+if [ -f /etc/slackware-version ]; then -+ distribution="slackware" -+elif [ -f /etc/SuSE-release ]; then - distribution="suse" - suse_version=$(grep 'VERSION = ' /etc/SuSE-release | sed -e s/'VERSION = '//) - elif [ -f /etc/UnitedLinux-release ]; then -@@ -490,6 +492,8 @@ - - if [ "$distribution" = "debian" ]; then - rcalsasound=/etc/init.d/alsa -+elif [ -x /etc/rc.d/rc.alsa ]; then -+ rcalsasound=/etc/rc.d/rc.alsa - elif [ -x /etc/init.d/alsasound ]; then - rcalsasound=/etc/init.d/alsasound - elif [ -x /usr/sbin/rcalsasound ]; then ---- ./alsaconf/alsaconf.8.orig 2007-05-31 03:07:21.000000000 -0500 -+++ ./alsaconf/alsaconf.8 2007-06-05 19:01:03.000000000 -0500 +diff -Nur alsa-utils-1.0.21.orig/alsaconf/alsaconf.8 alsa-utils-1.0.21/alsaconf/alsaconf.8 +--- alsa-utils-1.0.21.orig/alsaconf/alsaconf.8 2009-08-31 10:13:36.000000000 -0500 ++++ alsa-utils-1.0.21/alsaconf/alsaconf.8 2009-11-11 23:45:11.943377777 -0600 @@ -16,8 +16,6 @@ This manual page documents briefly the .B alsaconf @@ -52,3 +31,26 @@ -This manual page was written by Jordi Mallach <jordi@debian.org>, -for the Debian system (but may be used by others). +This manual page was written by Jordi Mallach <jordi@debian.org>. +diff -Nur alsa-utils-1.0.21.orig/alsaconf/alsaconf.in alsa-utils-1.0.21/alsaconf/alsaconf.in +--- alsa-utils-1.0.21.orig/alsaconf/alsaconf.in 2009-08-31 10:13:36.000000000 -0500 ++++ alsa-utils-1.0.21/alsaconf/alsaconf.in 2009-11-11 23:44:21.081360666 -0600 +@@ -50,7 +50,9 @@ + } + + # Check for GNU/Linux distributions +-if [ -f /etc/SuSE-release ]; then ++if [ -f /etc/slackware-version ]; then ++ distribution="slackware" ++elif [ -f /etc/SuSE-release ]; then + distribution="suse" + suse_version=$(grep 'VERSION = ' /etc/SuSE-release | sed -e s/'VERSION = '//) + elif [ -f /etc/UnitedLinux-release ]; then +@@ -305,7 +307,7 @@ + elif [ "$kernel" = "new" ]; then + cfgfile="/etc/modprobe.conf" + if [ -d /etc/modprobe.d ]; then +- cfgout="/etc/modprobe.d/50-sound.conf" ++ cfgout="/etc/modprobe.d/sound.conf" + cfgoldout="/etc/modprobe.d/sound" + if [ ! -f $cfgout ]; then + modver=$(modprobe -V | sed -e's/^module-init-tools version //') diff --git a/source/ap/ash/ash.SlackBuild b/source/ap/ash/ash.SlackBuild index deaad12d1..f83113c25 100755 --- a/source/ap/ash/ash.SlackBuild +++ b/source/ap/ash/ash.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,8 +21,17 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=0.4.0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -32,7 +41,8 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -tar xzvf $CWD/ash-$VERSION.tar.gz +rm -rf ash-$VERSION +tar xzvf $CWD/ash-$VERSION.tar.gz || exit 1 cd ash-$VERSION chown -R root:root . ( cd $CWD/patches diff --git a/source/ap/ash/patches/ash-hetio.patch b/source/ap/ash/patches/ash-hetio.patch index c416cde53..a6800897b 100644 --- a/source/ap/ash/patches/ash-hetio.patch +++ b/source/ap/ash/patches/ash-hetio.patch @@ -177,7 +177,7 @@ diff -urN ash-0.4.0/hetio.c ash-0.4.0-/hetio.c + out1str("\b \b"); + --*cursor; + memmove(parsenextc + *cursor, parsenextc + *cursor + 1, -+ BUFSIZ - *cursor + 1); ++ BUFSIZ - (*cursor + 1)); + + for (j = *cursor; j < (BUFSIZ - 1); j++) { + if (!*(parsenextc + j)) diff --git a/source/ap/cdrtools/cdrtools.SlackBuild b/source/ap/cdrtools/cdrtools.SlackBuild index 49aa08c08..b72c8a13e 100755 --- a/source/ap/cdrtools/cdrtools.SlackBuild +++ b/source/ap/cdrtools/cdrtools.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.01.01a57 +VERSION=${VERSION:-$(echo cdrtools-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} + ZISOFSTOOLS=1.0.8 -ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-3} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -46,21 +55,29 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -INS_BASE=/usr make -e $NUMJOBS || exit 1 +make -e $NUMJOBS INS_BASE=/usr || exit 1 # Without this second run, cdda2wav is skipped... -INS_BASE=/usr make -e || exit 1 -INS_BASE=$PKG/usr make -e install || exit 1 +make -e INS_BASE=/usr || exit 1 +make -e install INS_BASE=/usr DEST_DIR=$PKG || exit 1 + +# I don't know why this couldn't be "/etc/cdrtools" or something, but since +# getty uses it already I'm not going to argue the point. +mv $PKG/etc/default/cdrecord $PKG/etc/default/cdrecord.new + +# These don't need to be in the package, IMHO. +rm -rf $PKG/usr/include \ + $PKG/usr/lib/profiled \ + $PKG/usr/lib/*.a \ + $PKG/usr/man/man5 + +# Next big hole? ;) (don't ship rscsi) +rm -r $PKG/usr/sbin +rm -f $PKG/etc/default/rscsi $PKG/usr/man/man1/rscsi.1 # Remove dupes: rm -rf $PKG/usr/share/doc rmdir $PKG/usr/share -# I don't know why this couldn't be "/etc/cdrtools" or something, but since -# getty uses it already I'm not going to argue the point. -mkdir -p $PKG/etc/default -cat cdrecord/cdrecord.dfl > $PKG/etc/default/cdrecord.new -cat rscsi/rscsi.dfl > $PKG/etc/default/rscsi.new - mkdir -p $PKG/usr/doc/cdrtools-$VERSION cp -a \ ABOUT AN-* BUILD CDDL* COMPILE CONTRIBUTING COPYING* Changelog \ @@ -68,7 +85,6 @@ cp -a \ $PKG/usr/doc/cdrtools-$VERSION chown -R root:root $PKG/usr/doc/cdrtools-$VERSION/* find $PKG/usr/doc/cdrtools-$VERSION -type f -exec chmod 644 {} \; - ( cd mkisofs mkdir -p $PKG/usr/doc/cdrtools-$VERSION/mkisofs @@ -87,23 +103,11 @@ find $PKG/usr/doc/cdrtools-$VERSION -type f -exec chmod 644 {} \; chown root:root $PKG/usr/doc/cdrtools-$VERSION/cdda2wav/* chmod 644 $PKG/usr/doc/cdrtools-$VERSION/cdda2wav/* ) - -# These don't need to be in the package, IMHO. -rm -rf $PKG/usr/include $PKG/usr/man/man5 $PKG/usr/man/man1/cdda2ogg.1 $PKG/usr/lib/profiled $PKG/usr/lib/*.a - -# Fix permissions: -cd $PKG -find . -type d -exec chmod 755 {} \; -chown root:root -R $PKG -find $PKG/usr/man -type f -exec chmod 644 {} \; -find $PKG/usr/man -type f -exec gzip -9 {} \; -chmod 755 $PKG/usr/bin/* - -( cd $PKG/usr/bin ; ln -sf mkisofs mkhybrid ) - -# Next big hole? ;) -rm -r $PKG/usr/sbin -rm -f $PKG/usr/doc/cdrtools-$VERSION/README.rscsi +# The entire ChangeLog is excessive for most users: +cat $PKG/usr/doc/cdrtools-$VERSION/Changelog | head -n 1000 > $PKG/usr/doc/cdrtools-$VERSION/CL +mv $PKG/usr/doc/cdrtools-$VERSION/CL $PKG/usr/doc/cdrtools-$VERSION/Changelog +cat $PKG/usr/doc/cdrtools-$VERSION/mkisofs/ChangeLog | head -n 1000 > $PKG/usr/doc/cdrtools-$VERSION/mkisofs/CL +mv $PKG/usr/doc/cdrtools-$VERSION/mkisofs/CL $PKG/usr/doc/cdrtools-$VERSION/mkisofs/ChangeLog mkdir -p $PKG/install zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh @@ -120,16 +124,25 @@ find . \ -exec chmod 755 {} \; -o \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -./configure --prefix=/usr +CFLAGS="-O2" ./configure --prefix=/usr --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 cat mkzftree > $PKG/usr/bin/mkzftree -chmod 755 $PKG/usr/bin/mkzftree +chmod 0755 $PKG/usr/bin/mkzftree cat mkzftree.1 | gzip -9c > $PKG/usr/man/man1/mkzftree.1.gz mkdir -p $PKG/usr/doc/zisofs-tools-$ZISOFSTOOLS cp -a \ CHANGES COPYING INSTALL README zisofs.magic \ $PKG/usr/doc/zisofs-tools-$ZISOFSTOOLS +# Fix permissions: +cd $PKG +find . -type d -exec chmod 755 {} \; +chown root:root -R $PKG +find $PKG/usr/man -type f -exec chmod 644 {} \; +find $PKG/usr/man -type f -exec gzip -9 {} \; +find $PKG/usr/doc/cdrtools-$VERSION -type f -exec chmod 0644 {} \; +chmod 0755 $PKG/usr/bin/* + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/ap/cdrtools/doinst.sh b/source/ap/cdrtools/doinst.sh index 78d62faa9..8d3d56273 100644 --- a/source/ap/cdrtools/doinst.sh +++ b/source/ap/cdrtools/doinst.sh @@ -1,14 +1,13 @@ -#!/bin/sh config() { NEW="$1" - OLD="`dirname $NEW`/`basename $NEW .new`" + OLD="$(dirname $NEW)/$(basename $NEW .new)" # If there's no config file by that name, mv it over: if [ ! -r $OLD ]; then mv $NEW $OLD - elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy rm $NEW fi # Otherwise, we leave the .new copy for the admin to consider... } config etc/default/cdrecord.new -config etc/default/rscsi.new + diff --git a/source/ap/cupsddk/slack-desc b/source/ap/cupsddk/slack-desc deleted file mode 100644 index e4afd3522..000000000 --- a/source/ap/cupsddk/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -cupsddk: cupsddk (CUPS Driver Development Kit) -cupsddk: -cupsddk: The CUPS Driver Development Kit (DDK) provides a suite of standard -cupsddk: drivers, a PPD file compiler, and other utilities that can be used -cupsddk: to develop printer drivers for CUPS and other printing environments. -cupsddk: CUPS provides a portable printing layer for UNIX®-based operatin -cupsddk: systems. The CUPS DDK provides the means for mass-producing PPD -cupsddk: files and drivers/filters for CUPS-based printer drivers. -cupsddk: -cupsddk: -cupsddk: diff --git a/source/ap/diffutils/diffutils-sdiff-no-waitpid.patch b/source/ap/diffutils/diffutils-sdiff-no-waitpid.patch index a41b11648..c8eefb44b 100644 --- a/source/ap/diffutils/diffutils-sdiff-no-waitpid.patch +++ b/source/ap/diffutils/diffutils-sdiff-no-waitpid.patch @@ -1,6 +1,7 @@ ---- diffutils-2.8.4/src/sdiff.c.orig 2002-06-17 00:55:42.000000000 -0500 -+++ diffutils-2.8.4/src/sdiff.c 2003-01-08 03:04:02.000000000 -0600 -@@ -692,7 +692,7 @@ +diff -Nur diffutils-2.9.orig/src/sdiff.c diffutils-2.9.new/src/sdiff.c +--- diffutils-2.9.orig/src/sdiff.c 2010-02-11 03:39:17.000000000 -0600 ++++ diffutils-2.9.new/src/sdiff.c 2010-02-14 02:28:19.077953690 -0600 +@@ -715,7 +715,7 @@ ck_fclose (out); { @@ -9,7 +10,7 @@ int werrno = 0; #if ! (HAVE_WORKING_FORK || HAVE_WORKING_VFORK) -@@ -701,11 +701,6 @@ +@@ -724,11 +724,6 @@ werrno = errno; #else ck_fclose (diffout); diff --git a/source/ap/diffutils/diffutils.SlackBuild b/source/ap/diffutils/diffutils.SlackBuild index 50ac985d3..f338b71da 100755 --- a/source/ap/diffutils/diffutils.SlackBuild +++ b/source/ap/diffutils/diffutils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,13 +21,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.8.1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +PKGNAM=diffutils +VERSION=3.0 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-diffutils +PKG=$TMP/package-${PKGNAM} if [ "$ARCH" = "i386" ]; then SLKCFLAGS="-O2 -march=i386 -mcpu=i686" @@ -37,15 +47,17 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf diffutils-$VERSION -tar xzvf $CWD/diffutils-$VERSION.tar.gz -cd diffutils-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.xz +cd $PKGNAM-$VERSION chown -R root:root . find . \ @@ -61,17 +73,17 @@ touch man/sdiff.1 CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --mandir=/usr/man \ + --infodir=/usr/info \ --program-prefix="" \ --program-suffix="" \ - $ARCH-slackware-linux + --build=$ARCH-slackware-linux make || exit 1 make install DESTDIR=$PKG || exit 1 -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null # Compress and if needed symlink the man pages: if [ -d $PKG/usr/man ]; then @@ -96,15 +108,22 @@ if [ -d $PKG/usr/info ]; then ) fi -mkdir -p $PKG/usr/doc/diffutils-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - ABOUT-NLS AUTHORS COPYING INSTALLME NEWS README THANKS \ - $PKG/usr/doc/diffutils-$VERSION + AUTHORS COPYING NEWS README THANKS TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -makepkg -l y -c n $TMP/diffutils-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/ap/foomatic-filters/foomatic-filters.SlackBuild b/source/ap/foomatic-filters/foomatic-filters.SlackBuild index fbf949039..9454f6754 100755 --- a/source/ap/foomatic-filters/foomatic-filters.SlackBuild +++ b/source/ap/foomatic-filters/foomatic-filters.SlackBuild @@ -22,10 +22,19 @@ PKGNAM=foomatic-filters -VERSION=${VERSION:-4.0.2} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -48,7 +60,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.gz || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: @@ -111,9 +123,17 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - COPYING ChangeLog README STANDARD_installation TODO USAGE \ + COPYING README STANDARD_installation TODO USAGE \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/ap/ghostscript/ghostscript-pdf2dsc.patch b/source/ap/ghostscript/ghostscript-pdf2dsc.patch new file mode 100644 index 000000000..31b6b5440 --- /dev/null +++ b/source/ap/ghostscript/ghostscript-pdf2dsc.patch @@ -0,0 +1,12 @@ +diff -up ghostscript-8.71/lib/pdf2dsc.ps.pdf2dsc ghostscript-8.71/lib/pdf2dsc.ps +--- ghostscript-8.71/lib/pdf2dsc.ps.pdf2dsc 2010-02-20 15:50:51.287734970 +0000 ++++ ghostscript-8.71/lib/pdf2dsc.ps 2010-02-20 15:51:02.902609964 +0000 +@@ -116,7 +116,7 @@ systemdict /.setsafe known { .setsafe } + DSCfile PDFname write==only + ( \(r\) file { DELAYSAFER { .setsafe } if } stopped pop\n) puts + ( pdfopen begin\n) puts +- ( copy_trailer_attrs\n) puts ++ ( process_trailer_attrs\n) puts + (%%EndSetup\n) puts + + /.hasPageLabels false def % see "Page Labels" in the PDF Reference diff --git a/source/ap/ghostscript/ghostscript.SlackBuild b/source/ap/ghostscript/ghostscript.SlackBuild index b0bb34ba3..a17d34286 100755 --- a/source/ap/ghostscript/ghostscript.SlackBuild +++ b/source/ap/ghostscript/ghostscript.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,18 @@ PKGNAM=ghostscript -VERSION=${VERSION:-8.70} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} - +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -42,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP @@ -49,6 +60,8 @@ rm -rf ${PKGNAM}-${VERSION} tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION +zcat $CWD/ghostscript-pdf2dsc.patch.gz | patch -p1 --verbose || exit 1 + ## Regenerate ./configure: #sh autogen.sh @@ -74,9 +87,9 @@ find . \ --program-prefix= \ --program-suffix= \ --build=$ARCH-slackware-linux - make - make install - make install DESTDIR=$PKG + make || exit 1 + make install || exit 1 + make install DESTDIR=$PKG || exit 1 ) || exit 1 # Configure: diff --git a/source/ap/gphoto2/gphoto2.SlackBuild b/source/ap/gphoto2/gphoto2.SlackBuild index 9670b082f..31575b6ff 100755 --- a/source/ap/gphoto2/gphoto2.SlackBuild +++ b/source/ap/gphoto2/gphoto2.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,15 +21,25 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=gphoto2 -VERSION=2.4.5 -ARCH=${ARCH:-x86_64} +PKGNAM=gphoto2 +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -37,14 +47,16 @@ elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root.root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -85,14 +97,22 @@ if [ -d $PKG/usr/man ]; then ) fi -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* INSTALL NEWS README TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/ap/gutenprint/gutenprint.SlackBuild b/source/ap/gutenprint/gutenprint.SlackBuild index 94fb1cbc0..e713eefbc 100755 --- a/source/ap/gutenprint/gutenprint.SlackBuild +++ b/source/ap/gutenprint/gutenprint.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=5.2.4 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +VERSION=${VERSION:-$(echo gutenprint-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -100,10 +112,15 @@ cp -a \ mv $PKG/usr/share/gutenprint/doc/* $PKG/usr/doc/gutenprint-${VERSION} rmdir $PKG/usr/share/gutenprint/doc -# If you want 1MB of ChangeLog, it's in the source... -rm -f $PKG/usr/doc/gutenprint-${VERSION}/ChangeLog +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi -# Big... again, it's in the source if you want it. +# Big... it's in the source if you want it. rm -f $PKG/usr/share/gutenprint/samples/profile.jpg rm -f $PKG/usr/doc/gutenprint-${VERSION}/*.pdf diff --git a/source/ap/hplip/hplip.SlackBuild b/source/ap/hplip/hplip.SlackBuild index 64462a78e..fd944d226 100755 --- a/source/ap/hplip/hplip.SlackBuild +++ b/source/ap/hplip/hplip.SlackBuild @@ -2,8 +2,8 @@ # Slackware build script for hplip -# Copyright 2006-2009 Robby Workman, Northport, Alabama, USA -# Copyright 2006-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006-2010 Robby Workman, Northport, Alabama, USA +# Copyright 2006-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,13 +23,22 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=hplip -VERSION=${VERSION:-3.9.4b} -ARCH=${ARCH:-x86_64} +PKGNAM=hplip +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -39,19 +48,22 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ @@ -60,9 +72,6 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Fix a segfault bug -zcat $CWD/hplip.prevent_segfault.diff.gz | patch -p1 || exit 1 - # Fix udev rules for current versions of udev sed -i 's/SYSFS/ATTR/g' data/rules/*.rules # Fix ownership in udev rules file @@ -81,6 +90,7 @@ CXXFLAGS="$SLKCFLAGS" \ --with-docdir=/usr/doc/hplip-$VERSION \ --with-hpppddir=/usr/share/cups/model/HP \ --with-drvdir=/usr/share/cups/drv/hp \ + --enable-hpijs-install \ --enable-shadow-build \ --enable-scan-build \ --enable-gui-build \ @@ -108,5 +118,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/ap/hplip/hplip.prevent_segfault.diff b/source/ap/hplip/hplip.prevent_segfault.diff deleted file mode 100644 index 1021a2e65..000000000 --- a/source/ap/hplip/hplip.prevent_segfault.diff +++ /dev/null @@ -1,23 +0,0 @@ -Thanks to Tim Waugh <twaugh redhat com> for the patch -Prevent crash when DEVICE_URI/PRINTER environment variables are not - set (https://bugzilla.redhat.com/show_bug.cgi?id=479808 comment 6) - -diff -Nur hplip-3.9.4b.old/prnt/hpijs/hpijs.cpp hplip-3.9.4b.new/prnt/hpijs/hpijs.cpp ---- hplip-3.9.4b.old/prnt/hpijs/hpijs.cpp 2009-04-29 15:36:54.000000000 -0500 -+++ hplip-3.9.4b.new/prnt/hpijs/hpijs.cpp 2009-06-09 00:41:44.684172840 -0500 -@@ -218,8 +218,14 @@ - // call dbus here - const char *user_name = " "; - const char *title = " "; -+ char *device_uri = getenv ("DEVICE_URI"); -+ char *printer = getenv("PRINTER"); - int job_id = 0; -- SendDbusMessage (getenv ("DEVICE_URI"), getenv("PRINTER"), -+ if (!device_uri) -+ device_uri = ""; -+ if (!printer) -+ printer = ""; -+ SendDbusMessage (device_uri, printer, - EVENT_PRINT_FAILED_MISSING_PLUGIN, - user_name, job_id, title); - BUG("unable to set device=%s, err=%d\n", svalue, r); diff --git a/source/ap/jed/jed.SlackBuild b/source/ap/jed/jed.SlackBuild index 68c851ff8..d6da7b486 100755 --- a/source/ap/jed/jed.SlackBuild +++ b/source/ap/jed/jed.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.99-18 -PKGVER=0.99_18 -ARCH=${ARCH:-x86_64} +VERSION=0.99-19 +PKGVER=0.99_19 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-3} if [ "$ARCH" = "i386" ]; then SLKCFLAGS="-O2 -march=i386 -mcpu=i686" @@ -34,6 +44,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -45,8 +57,6 @@ cd $TMP rm -rf jed-$VERSION tar xvf $CWD/jed-$VERSION.tar.bz2 || exit 1 cd jed-$VERSION -zcat $CWD/jed.mouse.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -zcat $CWD/jed.multibyte.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 chown -R root:root . find . \ @@ -59,13 +69,14 @@ JED_ROOT=/usr/share/jed \ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --mandir=/usr/man \ --with-slang=/usr \ --build=$ARCH-slackware-linux make clean make all rgrep $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -cp src/objs/rgrep $PKG/usr/bin +cp src/*objs/rgrep $PKG/usr/bin find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/ap/jed/jed.mouse.diff b/source/ap/jed/jed.mouse.diff deleted file mode 100644 index 4ff607169..000000000 --- a/source/ap/jed/jed.mouse.diff +++ /dev/null @@ -1,17 +0,0 @@ ---- ./src/Makefile.in.orig 2006-02-15 21:09:50.000000000 -0600 -+++ ./src/Makefile.in 2006-06-25 23:10:19.000000000 -0500 -@@ -52,10 +52,10 @@ - #--------------------------------------------------------------------------- - # 1. Linux GPM Mouse support - # Uncomment next FOUR lines for GPM mouse support --#MOUSEFLAGS = -DUSE_GPM_MOUSE --#MOUSELIB = -lgpm --#GPMMOUSEO = gpmmouse.o --#OBJGPMMOUSEO = $(OBJDIR)/$(GPMMOUSEO) -+MOUSEFLAGS = -DUSE_GPM_MOUSE -+MOUSELIB = -lgpm -+GPMMOUSEO = gpmmouse.o -+OBJGPMMOUSEO = $(OBJDIR)/$(GPMMOUSEO) - - - # 2. XFree86 XRENDERFONT (Anti-aliased font) support for XJED diff --git a/source/ap/jed/jed.multibyte.diff b/source/ap/jed/jed.multibyte.diff deleted file mode 100644 index 266fece72..000000000 --- a/source/ap/jed/jed.multibyte.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./src/misc.c.orig 2006-03-04 01:55:05.000000000 -0600 -+++ ./src/misc.c 2006-06-25 23:14:32.000000000 -0500 -@@ -741,7 +741,7 @@ - - void jed_ungetkey_wchar (SLwchar_Type wc) - { -- SLuchar_Type *b, buf[SLUTF8_MAX_MBLEN]; -+ SLuchar_Type *b, buf[JED_MAX_MULTIBYTE_SIZE]; - - if (NULL == (b = jed_wchar_to_multibyte (wc, buf))) - return; diff --git a/source/ap/linuxdoc-tools/ChangeLog.txt b/source/ap/linuxdoc-tools/ChangeLog.txt index 86f1eb7f8..ef6c0a2c2 100644 --- a/source/ap/linuxdoc-tools/ChangeLog.txt +++ b/source/ap/linuxdoc-tools/ChangeLog.txt @@ -1,3 +1,30 @@ +Wed Feb 10 10:02:16 GMT 2010 + Stuart Winter <mozes@slackware.com> + linuxdoc-tools 0.9.66, build 2. + * Applied an upstream patch to gtk-doc-1.13, fixing problems + with gtkdoc-fixxref. + * Updated build script to work with the new rpm2tgz which now + packages all src RPM contents into the root of the tar archive + rather than a sub directory. + +Tue Jan 12 20:42:57 GMT 2010 + Stuart Winter <mozes@slackware.com> + linuxdoc-tools 0.9.66, build 1. + * Upgraded to linuxdoc-tools 0.9.66 + * Upgraded to gnome-doc-utils 0.19.1 + * Upgraded to gtk-doc 1.13 + * Upgraded to AsciiDoc 8.5.2. + * Upgraded to docbook-xsl 1.75.2. + * Upgraded to docbook-xsl-doc 1.75.2. + +Tue Nov 10 18:28:49 GMT 2009 + Stuart Winter <mozes@slackware.com> + linuxdoc-tools-0.9.65, build 1. + * Upgraded to linuxdoc-tools 0.9.65 + * Upgraded to gnome-doc-utils-0.18.0 + * Upgraded to xmlto-0.0.23 + * Upgraded to asciidoc-8.5.1 + Sun Aug 2 19:07:43 BST 2009 Stuart Winter <mozes@slackware.com> linuxdoc-tools-0.9.56, build 5. diff --git a/source/ap/linuxdoc-tools/arm/build b/source/ap/linuxdoc-tools/arm/build index d59da3271..3f29e62ca 100755 --- a/source/ap/linuxdoc-tools/arm/build +++ b/source/ap/linuxdoc-tools/arm/build @@ -9,9 +9,9 @@ source /usr/share/slackdev/buildkit.sh # Package metadata: export PKGNAM=linuxdoc-tools -export VERSION=${VERSION:-0.9.56} +export VERSION=${VERSION:-0.9.66} export PKGARCH=${PKGARCH:-arm} -export BUILD=${BUILD:-1} +export BUILD=${BUILD:-2} export PKGSERIES=${PKGSERIES:-ap} export SLACKPACKAGE=$PKGNAM-$VERSION-$PKGARCH-$BUILD.tgz export PKGEXT=${PKGEXT:-tgz} diff --git a/source/ap/linuxdoc-tools/linuxdoc-tools.build b/source/ap/linuxdoc-tools/linuxdoc-tools.build index 8d28ea332..cd95c0f08 100755 --- a/source/ap/linuxdoc-tools/linuxdoc-tools.build +++ b/source/ap/linuxdoc-tools/linuxdoc-tools.build @@ -14,22 +14,22 @@ ############################################################################### # Version of LDT (which is also the .t?z package version) -LINUXDOCTOOLSVER=0.9.56 +LINUXDOCTOOLSVER=$PKGVERSION # Bundled package versions: SGMLDTD3VER=3.1 SGMLDTD4VER=4.5 XMLDTDVER=4.5 -XSLSTYLESHEETSVER=1.75.1 +XSLSTYLESHEETSVER=1.75.2 DSSSLSTYLESHEETSVER=1.79 SGMLCOMMONVER=0.6.3 OPENJADEVER=1.3.3-pre1 OPENSPVER=1.5.2 -GNOMEDOCUTILSVER=0.17.2 -GTKDOCVER=1.11 +GNOMEDOCUTILSVER=0.19.1 +GTKDOCVER=1.13 SGMLSPLVER=1.03ii -XMLTOVER=0.0.22 -ASCIIDOCVER=8.4.5 +XMLTOVER=0.0.23 +ASCIIDOCVER=8.5.2 DOCBOOKUTILSVER=0.6.14 # Determine the general CFLAGS for the known architectures: @@ -61,8 +61,8 @@ esac # Extract source: cd $TMP -tar xvf $CWD/sources/asciidoc-$ASCIIDOCVER.tar.gz || exit 1 -cd asciidoc-$ASCIIDOCVER +tar xvf $CWD/sources/asciidoc-$ASCIIDOCVER.tar.*z* +cd asciidoc-$ASCIIDOCVER || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -92,12 +92,12 @@ cp -fav \ # Extract source. We're using a source RPM since it contains a number of # patches that we need: cd $TMP +mkdir sgml-common && cd sgml-common rpm2tgz $CWD/sources/sgml-common-${SGMLCOMMONVER}*.src.rpm -tar xvf sgml-common-*src.tgz -cd sgml-common-$SGMLCOMMONVER-* || exit 1 +tar xvf sgml-common-*src.tgz || exit 1 # The real source archive is stored inside the source RPM, you see: -tar xvf sgml-common-$SGMLCOMMONVER.tgz || exit 1 -cd sgml-common-$SGMLCOMMONVER +tar xvf sgml-common-$SGMLCOMMONVER.tgz +cd sgml-common-$SGMLCOMMONVER || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -138,7 +138,7 @@ install-catalog --add /etc/sgml/sgml-docbook.cat \ # Copy docs: mkdir -vpm755 /usr/doc/sgml-common-$SGMLCOMMONVER cp -fav \ - COPYING AUTHORS INSTALL NEWS README ChangeLog ../sgml-common-CHANGES \ + COPYING AUTHORS INSTALL NEWS README ChangeLog \ /usr/doc/sgml-common-$SGMLCOMMONVER ####################### Install docbooks ############################ @@ -151,12 +151,7 @@ cd sgml-dtd # but they version number the archive with the latest version. tar xvf $CWD/sources/docbook_*orig*.tar.gz cd docbook* || exit 1 -zcat $CWD/sources/docbook_*.diff.gz | patch -p1 || exit 1 -# Don't apply the patches because whilst I know that the problem we have -# on Slackware does not exist on Debian, I want to keep the Slackware -# build in line with Linux From Scratch, since their documentation is -# excellent. -#for i in debian/patches/*.dpatch ; do patch --verbose -p1 < $i ; done +chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ -exec chmod 755 {} \; -o \ @@ -169,6 +164,7 @@ find . \ ############### ( cd docbook-$SGMLDTD3VER + pwd # Remove the ENT definitions from the catalog file: sed -i -e '/ISO 8879/d' docbook.cat @@ -213,6 +209,7 @@ EOF ( cd docbook-$SGMLDTD4VER + pwd # Remove the ENT definitions from the catalog file: sed -i -e '/ISO 8879/d' -e '/gml/d' docbook.cat @@ -246,7 +243,7 @@ EOF # Copy docs: mkdir -vpm755 /usr/doc/sgml-dtd4-$SGMLDTD4VER cp -fav \ - ChangeLog README \ + README \ /usr/doc/sgml-dtd4-$SGMLDTD4VER/ ) @@ -255,11 +252,11 @@ EOF # Extract source: cd $TMP +mkdir opensp && cd opensp rpm2tgz $CWD/sources/opensp-${OPENSPVER}*.src.rpm tar xvf opensp*src.tgz -cd opensp-${OPENSPVER}* || exit 1 -tar xvf OpenSP-$OPENSPVER.tar.gz || exit 1 -cd OpenSP-$OPENSPVER +tar xvf OpenSP-$OPENSPVER.tar.gz +cd OpenSP-$OPENSPVER || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -275,7 +272,8 @@ patch --verbose -p1 < ../opensp-sigsegv.patch || exit 1 # Configure without optimisation. OpenSP & OpenJade # are sensitive to optimisations, resulting in segfaults, -# particularly on the ARM platform. +# particularly on the ARM platform. Apparently -O1 will work but +# let's just leave it as is. # # This is configured not to build the documentation. If anybody really needs # it, let me know and I'll adjust the build script - it's just a PITA to @@ -306,24 +304,31 @@ make install DESTDIR=/ || exit 1 # Rename sx to sgml2xml & create symlinks: mv -f /usr/bin/osx /usr/bin/osgml2xml ( cd /usr/bin ; ln -vfs osgml2xml osx ) -mv -f /usr/man/man1/osx.1 /usr/man/man1/osgml2xml.1 -( cd /usr/man/man1 ; ln -vfs osgml2xml.1 osx.1 ) # Create symlinks to binaries: ( cd /usr/bin for file in nsgmls sgmlnorm spam spent sgml2xml ; do - rm -f $file + rm -fv $file ln -vfs o$file $file done ) # Fix man pages: -( cd /usr/man/man1 - for file in nsgmls sgmlnorm spam spent sgml2xml ; do - rm -f ${file}.1* - ln -vfs o${file}.1 ${file}.1 - done -) +# Sorry, but OpenSP needs xmlto installed to create its man pages and documentation. +# Due to build dependency order, we build xmlto later on. I did try and move xmlto earlier +# in the build but didn't get the build order correct. If anybody REALLY misses this documentation, +# email mozes@slackware.com and I'll have another go at adjusting the build order. +# +# Building man pages has been disabled with ./configure --disable-doc-build. +# +#( cd /usr/man/man1 +# mv -fv osx.1 osgml2xml.1 +# ln -vfs osgml2xml.1 osx.1 +# for file in nsgmls sgmlnorm spam spent sgml2xml ; do +# rm -f ${file}.1* +# ln -vfs o${file}.1 ${file}.1 +# done +#) # Rename docs directory: mv -fv /usr/doc/OpenSP /usr/doc/OpenSP-$OPENSPVER @@ -334,7 +339,7 @@ mv -fv /usr/doc/OpenSP /usr/doc/OpenSP-$OPENSPVER # Extract source: cd $TMP -tar xvf $CWD/sources/openjade-${OPENJADEVER}.tar.gz +tar xvf $CWD/sources/openjade-${OPENJADEVER}.tar.*z* cd openjade-${OPENJADEVER} || exit 1 chown -R root:root . find . \ @@ -394,13 +399,9 @@ echo "SYSTEM \"http://www.oasis-open.org/docbook/xml/${XMLDTDVER}/docbookx.dtd\" mkdir -vpm755 /usr/doc/openjade-$OPENJADEVER cp -fav \ COPYING NEWS README VERSION \ - doc/* dsssl/README.jadetex pubtext jadedoc unicode \ + doc/* dsssl/README.jadetex pubtext jadedoc \ /usr/doc/openjade-$OPENJADEVER -# The original package has this file, but it has most of the world's -# documentation too; we'll leave it in for the time being but I don't like it. -#rm -f /usr/doc/openjade-$OPENJADEVER/doc/Makefile - ####################### Build dsssl-stylesheets #################### # Extract source: @@ -409,7 +410,7 @@ mkdir docbook-dsssl-$DSSSLSTYLESHEETSVER cd docbook-dsssl-$DSSSLSTYLESHEETSVER tar xvf $CWD/sources/docbook-dsssl-$DSSSLSTYLESHEETSVER.tar.bz2 || exit 1 tar xvf $CWD/sources/docbook-dsssl-doc-$DSSSLSTYLESHEETSVER.tar.bz2 || exit 1 -cd docbook-dsssl-$DSSSLSTYLESHEETSVER +cd docbook-dsssl-$DSSSLSTYLESHEETSVER || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -448,11 +449,11 @@ cp -fav \ # Extract source: cd $TMP +mkdir docbook-utils && cd docbook-utils rpm2tgz $CWD/sources/docbook-utils-${DOCBOOKUTILSVER}*.src.rpm tar xvf docbook-utils-*src.tgz -cd docbook-utils-${DOCBOOKUTILSVER}* || exit 1 -tar xvf docbook-utils-$DOCBOOKUTILSVER.tar.gz || exit 1 -cd docbook-utils-$DOCBOOKUTILSVER +tar xvf docbook-utils-$DOCBOOKUTILSVER.tar.gz +cd docbook-utils-$DOCBOOKUTILSVER || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -462,6 +463,8 @@ find . \ # Apply patches: for i in \ + docbook-utils-rtfmanpage.patch \ + docbook-utils-sgmlinclude.patch \ docbook-utils-2ndspaces.patch \ docbook-utils-grepnocolors.patch \ docbook-utils-spaces.patch \ @@ -657,17 +660,15 @@ cp -favv \ # Extract source: cd $TMP -mkdir docbook-xsl-$XSLSTYLESHEETSVER -cd docbook-xsl-$XSLSTYLESHEETSVER +mkdir docbook-style-xsl && cd docbook-style-xsl rpm2tgz $CWD/sources/docbook-style-xsl-${XSLSTYLESHEETSVER}*.src.rpm tar xvf docbook-style-xsl*.tgz -cd docbook-style-xsl-$XSLSTYLESHEETSVER* || exit 1 tar xvf docbook-xsl-$XSLSTYLESHEETSVER.tar.bz2 # This unpacks atop of the main tree: tar xvf docbook-xsl-doc-$XSLSTYLESHEETSVER.tar.bz2 # Enter unpacked sources: -cd docbook-xsl-$XSLSTYLESHEETSVER +cd docbook-xsl-$XSLSTYLESHEETSVER || exit 1 chown -R root:root . find . \ @@ -730,8 +731,8 @@ cp -fav doc/* README* RELEASE-NOTES* NEWS* \ # Extract source: cd $TMP -tar xvf $CWD/sources/xmlto-$XMLTOVER.tar.bz2 || exit 1 -cd xmlto-$XMLTOVER +tar xvf $CWD/sources/xmlto-$XMLTOVER.tar.*z* +cd xmlto-$XMLTOVER || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -796,11 +797,10 @@ cp -fav \ # Extract source: cd $TMP -#rpm2tgz $CWD/sources/linuxdoc-tools-${LINUXDOCTOOLSVER}*.src.rpm -#tar xvf linuxdoc-tools-$LINUXDOCTOOLSVER*.tgz -#cd linuxdoc-tools-$LINUXDOCTOOLSVER* || exit 1 -#tar xvf linuxdoc-tools_$LINUXDOCTOOLSVER.tar.gz -tar xvf $CWD/sources/linuxdoc-tools_$LINUXDOCTOOLSVER*.tar.gz +mkdir linuxdoc-tools && cd linuxdoc-tools +rpm2tgz $CWD/sources/linuxdoc-tools-${LINUXDOCTOOLSVER}*.src.rpm +tar xvf linuxdoc-tools*.src.tgz +tar xvf linuxdoc-tools_$LINUXDOCTOOLSVER.tar.gz cd linuxdoc-tools-$LINUXDOCTOOLSVER || exit 1 chown -R root:root . @@ -810,14 +810,18 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Remove Tex from the $PATH so that we don't build formats of the linuxdoc-tools +# guide which don't work with tetex-3. These do work with texlive, but Slackware doesn't +# ship that, and just how many alternate versions of the documentation do we need anyway? :-) +OPATH=$PATH +export PATH=$( echo $PATH | sed -e 's?:/usr/share/texmf/bin??g' -e 's?/usr/share/texmf/bin:??g' ) + # Apply patches (these are included in the source rpm): -#for i in \ -# linuxdoc-tools-0.9.13-letter.patch \ -# linuxdoc-tools-0.9.20-lib64.patch ; do -# patch --verbose -p1 < ../$i -#done || exit 1 -# Add lib64 in Perl's path on a 64bit machine: -patch --verbose -p1 < $CWD/sources/linuxdoc-tools.lib64.diff || exit 1 +for i in \ + linuxdoc-tools-0.9.13-letter.patch \ + linuxdoc-tools-0.9.20-lib64.patch ; do + patch --verbose -p1 < ../$i +done || exit 1 # Find out what our Vendor perl directory is: eval $(perl '-V:installvendorlib') @@ -835,9 +839,9 @@ mkdir -p $PKG/$installvendorlib # --with-texdir=/usr/share/texmf/tex/latex/ \ # Adjust doc dir location: -sed -i 's?share/doc/linuxdoc-tools?doc/linuxdoc-tools-'"$$LINUXDOCTOOLSVER"'?g' Makefile +sed -i 's?share/doc/linuxdoc-tools?doc/linuxdoc-tools-'"$LINUXDOCTOOLSVER"'?g' Makefile -#( cd entity-map && autoconf && ./configure ) +( cd entity-map && autoconf && ./configure --prefix=/usr ) # Build serial. This does build in parallel but # I find linuxdoc-tools to be fragile between versions: @@ -857,8 +861,8 @@ make install \ # Install shell scripts for sgml2{txt,latex,info} for i in txt latex info; do \ - install -vpm755 debian/addition/sgml2$$i \ - /usr/bin/sgml2$$i; \ + install -vpm755 debian/addition/sgml2$i \ + /usr/bin/sgml2$i; \ done # Install info page: @@ -869,12 +873,15 @@ cat debian/linuxdoc-tools.info-base doc/guide.info > /usr/info/linuxdoc-sgml.inf # 'linuxdoc-tools', let's put our changelog into here: install -vpm644 $CWD/ChangeLog.txt /usr/doc/linuxdoc-tools-$LINUXDOCTOOLSVER/Slackware-ChangeLog.txt +# Restore $PATH: +export PATH=$OPATH + ####################### Build gnome-doc-utils ####################### # Extract source: cd $TMP -tar xvf $CWD/sources/gnome-doc-utils-$GNOMEDOCUTILSVER.tar.bz2 -cd gnome-doc-utils-* +tar xvf $CWD/sources/gnome-doc-utils-$GNOMEDOCUTILSVER.tar.*z* +cd gnome-doc-utils-* || exit 1 chown -R root:root . find . \ @@ -892,6 +899,7 @@ CFLAGS="$SLKCFLAGS" \ --localstatedir=/var \ --mandir=/usr/man \ --disable-scrollkeeper \ + --enable-build-utils \ --build=$ARCH-slackware-linux$HOSTTARGET || exit 1 # No parallel build here because it doesn't work: @@ -919,6 +927,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Apply an upstreamed fix for gtk-doc-1.13: +bzcat $CWD/sources/gtkdoc-1.13-fixref.patch.bz2 | patch --verbose -p1 || exit 1 + # Configure: ./configure \ --prefix=/usr \ @@ -944,3 +955,4 @@ cp -fav \ rm -rf /install mkdir -vpm755 /install install -vpm644 $CWD/slack-desc /install +#EOF diff --git a/source/ap/linuxdoc-tools/postbuildfixes.sh b/source/ap/linuxdoc-tools/postbuildfixes.sh index b9e305eec..8781faf7d 100755 --- a/source/ap/linuxdoc-tools/postbuildfixes.sh +++ b/source/ap/linuxdoc-tools/postbuildfixes.sh @@ -1,9 +1,9 @@ #!/bin/bash -# Once altertrack has determined what the contents of the package +# Once slacktrack has determined what the contents of the package # should be, it copies them into $SLACKTRACKFAKEROOT # From here we can make modifications to the package's contents -# immediately prior to the invocation of makepkg: altertrack will +# immediately prior to the invocation of makepkg: slacktrack will # do nothing else with the contents of the package after the execution # of this script. @@ -20,8 +20,8 @@ fi # Incase you had CUPS running: rm -rf etc/cups etc/printcap -# crond: -rm -rf var/spool/cron +# crond & mail (just incase you got a delivery!) +rm -rf var/spool/{cron,mail} rmdir var/spool # perllocal.pod files don't belong in packages. diff --git a/source/ap/linuxdoc-tools/sources/docbook_4.5-4.diff b/source/ap/linuxdoc-tools/sources/docbook_4.5-4.diff deleted file mode 100644 index 1993d3f62..000000000 --- a/source/ap/linuxdoc-tools/sources/docbook_4.5-4.diff +++ /dev/null @@ -1,1589 +0,0 @@ ---- docbook-4.5.orig/debian/patches/00list -+++ docbook-4.5/debian/patches/00list -@@ -0,0 +1,4 @@ -+01_remove_entity_sets_and_dcl_from_catalogs -+10_fix_101779_mention_artheader_to_articleinfo_change -+11_fix_dbpoolx_mod_header_comment_pubid -+12_fix_256119_and_turn_on_sgml_mode ---- docbook-4.5.orig/debian/patches/01_remove_entity_sets_and_dcl_from_catalogs.dpatch -+++ docbook-4.5/debian/patches/01_remove_entity_sets_and_dcl_from_catalogs.dpatch -@@ -0,0 +1,567 @@ -+#! /bin/sh /usr/share/dpatch/dpatch-run -+## 01_remove_entity_sets_and_dcl_from_catalogs.dpatch by -+## Mark Eichin <eichin@kitten.gen.ma.us> and Adam Di Carlo <aph@debian.org>. -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: This patch: -+## DP: * removes all SGML declarations from the catalogs, for more info, see -+## DP: debian/README.docbook.dcl -+## DP: * removes the ISO entity pointers since they are supplied by sgml-data -+## DP: * removes Public-IDs for DocBook XML -+## DP: * forces Public-ID rather than the System-ID in DTD declarations -+## DP: (closes: <URL:http://bugs.debian.org/97330>) -+## DP: -+## DP: <URL:http://packages.debian.org/changelogs/pool/main/d/docbook/current/changelog#versionversion4.4-1> -+## DP: <URL:http://packages.debian.org/changelogs/pool/main/d/docbook/current/changelog#versionversion4.1-5> -+## DP: <URL:http://packages.debian.org/changelogs/pool/main/d/docbook/current/changelog#versionversion4.1-2> -+## DP: <URL:http://packages.debian.org/changelogs/pool/main/d/docbook/current/changelog#versionversion3.0-4> -+ -+@DPATCH@ -+diff -urNad docbook-4.5~/docbook-2.4.1/docbook.cat docbook-4.5/docbook-2.4.1/docbook.cat -+--- docbook-4.5~/docbook-2.4.1/docbook.cat 1996-04-16 08:53:16.000000000 +0200 -++++ docbook-4.5/docbook-2.4.1/docbook.cat 2007-03-09 16:39:46.000000000 +0100 -+@@ -27,8 +27,13 @@ -+ -- ...................................................................... -- -+ -- SGML declaration associated with DocBook ............................. -- -+ -+-SGMLDECL "docbook.dcl" -+-DTDDECL "-//Davenport//DTD DocBook V2.4.1//EN" "docbook.dcl" -++-- disabled, see README.docbook.dcl -- -++-- SGMLDECL "docbook.dcl" -- -++-- DTDDECL "-//Davenport//DTD DocBook V2.4.1//EN" "docbook.dcl" -- -++ -++ -- ...................................................................... -- -++ -- Prefer PUBID to SYSID ................................................ -- -++OVERRIDE YES -+ -+ -- ...................................................................... -- -+ -- DocBook driver file .................................................. -- -+@@ -43,28 +48,5 @@ -+ PUBLIC "-//Davenport//ELEMENTS DocBook Document Hierarchy V2.4.1//EN" "dbhier.mod" -+ PUBLIC "-//Davenport//ELEMENTS DocBook Additional General Entities//EN" "dbgenent.mod" -+ -+- -- ...................................................................... -- -+- -- ISO entity sets ...................................................... -- -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" "iso-dia.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" "iso-num.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" "iso-pub.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" "iso-tech.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" "iso-lat1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" "iso-lat2.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" "iso-grk1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" "iso-grk2.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" "iso-grk3.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" "iso-grk4.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" "iso-amsa.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" "iso-amsb.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" "iso-amsc.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" "iso-amsn.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" "iso-amso.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" "iso-amsr.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" "iso-box.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" "iso-cyr1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" "iso-cyr2.gml" -+- -+ -- End of DocBook catalog data V2.4.1 ................................... -- -+ -- ...................................................................... -- -+diff -urNad docbook-4.5~/docbook-3.0/docbook.cat docbook-4.5/docbook-3.0/docbook.cat -+--- docbook-4.5~/docbook-3.0/docbook.cat 1996-12-10 16:35:22.000000000 +0100 -++++ docbook-4.5/docbook-3.0/docbook.cat 2007-03-09 16:44:17.000000000 +0100 -+@@ -27,7 +27,12 @@ -+ -- ...................................................................... --
-+ -- SGML declaration associated with DocBook ............................. --
-+
-+-DTDDECL "-//Davenport//DTD DocBook V3.0//EN" "docbook.dcl"
-++-- disabled, see README.docbook.dcl --
-++-- DTDDECL "-//Davenport//DTD DocBook V3.0//EN" "docbook.dcl" --
-++
-++ -- ...................................................................... --
-++ -- Prefer PUBID to SYSID ................................................ --
-++OVERRIDE YES
-+
-+ -- ...................................................................... --
-+ -- DocBook driver file .................................................. --
-+@@ -42,28 +47,5 @@ -+ PUBLIC "-//Davenport//ELEMENTS DocBook Document Hierarchy V3.0//EN" "dbhier.mod"
-+ PUBLIC "-//Davenport//ENTITIES DocBook Additional General Entities V3.0//EN" "dbgenent.mod"
-+
-+- -- ...................................................................... --
-+- -- ISO entity sets ...................................................... --
-+-
-+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" "iso-dia.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" "iso-num.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" "iso-pub.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" "iso-tech.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" "iso-lat1.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" "iso-lat2.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" "iso-grk1.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" "iso-grk2.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" "iso-grk3.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" "iso-grk4.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" "iso-amsa.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" "iso-amsb.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" "iso-amsc.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" "iso-amsn.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" "iso-amso.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" "iso-amsr.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" "iso-box.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" "iso-cyr1.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" "iso-cyr2.gml"
-+-
-+ -- End of catalog data for DocBook V3.0 ................................. --
-+ -- ...................................................................... --
-+diff -urNad docbook-4.5~/docbook-3.1/docbook.cat docbook-4.5/docbook-3.1/docbook.cat -+--- docbook-4.5~/docbook-3.1/docbook.cat 1999-02-02 06:53:32.000000000 +0100 -++++ docbook-4.5/docbook-3.1/docbook.cat 2007-03-09 16:44:12.000000000 +0100 -+@@ -19,7 +19,12 @@ -+ -- ...................................................................... --
-+ -- SGML declaration associated with DocBook ............................. --
-+
-+-DTDDECL "-//OASIS//DTD DocBook V3.1//EN" "docbook.dcl"
-++-- disabled, see README.docbook.dcl --
-++-- DTDDECL "-//OASIS//DTD DocBook V3.1//EN" "docbook.dcl" --
-++
-++ -- ...................................................................... --
-++ -- Prefer PUBID to SYSID ................................................ --
-++OVERRIDE YES
-+
-+ -- ...................................................................... --
-+ -- DocBook driver file .................................................. --
-+@@ -36,28 +41,5 @@ -+ PUBLIC "-//OASIS//ENTITIES DocBook Notations V3.1//EN" "dbnotn.mod"
-+ PUBLIC "-//OASIS//ENTITIES DocBook Character Entities V3.1//EN" "dbcent.mod"
-+
-+- -- ...................................................................... --
-+- -- ISO entity sets ...................................................... --
-+-
-+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" "iso-dia.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" "iso-num.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" "iso-pub.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" "iso-tech.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" "iso-lat1.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" "iso-lat2.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" "iso-grk1.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" "iso-grk2.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" "iso-grk3.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" "iso-grk4.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" "iso-amsa.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" "iso-amsb.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" "iso-amsc.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" "iso-amsn.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" "iso-amso.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" "iso-amsr.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" "iso-box.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" "iso-cyr1.gml"
-+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" "iso-cyr2.gml"
-+-
-+ -- End of catalog data for DocBook V3.1 ................................. --
-+ -- ...................................................................... --
-+diff -urNad docbook-4.5~/docbook-4.0/docbook.cat docbook-4.5/docbook-4.0/docbook.cat -+--- docbook-4.5~/docbook-4.0/docbook.cat 2000-05-18 21:27:28.000000000 +0200 -++++ docbook-4.5/docbook-4.0/docbook.cat 2007-03-09 16:45:08.000000000 +0100 -+@@ -19,7 +19,12 @@ -+ -- ...................................................................... -- -+ -- SGML declaration associated with DocBook ............................. -- -+ -+-DTDDECL "-//OASIS//DTD DocBook V4.0//EN" "docbook.dcl" -++-- disabled, see README.docbook.dcl -- -++-- DTDDECL "-//OASIS//DTD DocBook V4.0//EN" "docbook.dcl" -- -++ -++ -- ...................................................................... -- -++ -- Prefer PUBID to SYSID ................................................ -- -++OVERRIDE YES -+ -+ -- ...................................................................... -- -+ -- DocBook driver file .................................................. -- -+@@ -36,28 +41,5 @@ -+ PUBLIC "-//OASIS//ENTITIES DocBook Notations V4.0//EN" "dbnotn.mod" -+ PUBLIC "-//OASIS//ENTITIES DocBook Character Entities V4.0//EN" "dbcent.mod" -+ -+- -- ...................................................................... -- -+- -- ISO entity sets ...................................................... -- -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" "iso-dia.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" "iso-num.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" "iso-pub.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" "iso-tech.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" "iso-lat1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" "iso-lat2.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" "iso-grk1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" "iso-grk2.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" "iso-grk3.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" "iso-grk4.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" "iso-amsa.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" "iso-amsb.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" "iso-amsc.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" "iso-amsn.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" "iso-amso.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" "iso-amsr.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" "iso-box.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" "iso-cyr1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" "iso-cyr2.gml" -+- -+ -- End of catalog data for DocBook V4.0 ................................. -- -+ -- ...................................................................... -- -+diff -urNad docbook-4.5~/docbook-4.1/docbook.cat docbook-4.5/docbook-4.1/docbook.cat -+--- docbook-4.5~/docbook-4.1/docbook.cat 2000-06-19 16:50:28.000000000 +0200 -++++ docbook-4.5/docbook-4.1/docbook.cat 2007-03-09 16:53:00.000000000 +0100 -+@@ -19,7 +19,12 @@ -+ -- ...................................................................... -- -+ -- SGML declaration associated with DocBook ............................. -- -+ -+-DTDDECL "-//OASIS//DTD DocBook V4.1//EN" "docbook.dcl" -++-- disabled, see README.docbook.dcl -- -++-- DTDDECL "-//OASIS//DTD DocBook V4.1//EN" "docbook.dcl" -- -++ -++ -- ...................................................................... -- -++ -- Prefer PUBID to SYSID ................................................ -- -++OVERRIDE YES -+ -+ -- ...................................................................... -- -+ -- DocBook driver file .................................................. -- -+@@ -36,28 +41,5 @@ -+ PUBLIC "-//OASIS//ENTITIES DocBook Notations V4.1//EN" "dbnotn.mod" -+ PUBLIC "-//OASIS//ENTITIES DocBook Character Entities V4.1//EN" "dbcent.mod" -+ -+- -- ...................................................................... -- -+- -- ISO entity sets ...................................................... -- -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" "iso-dia.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" "iso-num.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" "iso-pub.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" "iso-tech.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" "iso-lat1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" "iso-lat2.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" "iso-grk1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" "iso-grk2.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" "iso-grk3.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" "iso-grk4.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" "iso-amsa.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" "iso-amsb.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" "iso-amsc.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" "iso-amsn.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" "iso-amso.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" "iso-amsr.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" "iso-box.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" "iso-cyr1.gml" -+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" "iso-cyr2.gml" -+- -+ -- End of catalog data for DocBook V4.1 ................................. -- -+ -- ...................................................................... -- -+diff -urNad docbook-4.5~/docbook-4.2/docbook.cat docbook-4.5/docbook-4.2/docbook.cat -+--- docbook-4.5~/docbook-4.2/docbook.cat 2002-07-17 18:14:28.000000000 +0200 -++++ docbook-4.5/docbook-4.2/docbook.cat 2007-03-09 16:42:30.000000000 +0100 -+@@ -22,9 +22,6 @@ -+ PUBLIC "-//OASIS//DTD DocBook V4.2//EN" -+ "docbook.dtd" -+ -+-PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -+- "docbookx.dtd" -+- -+ -- ...................................................................... -- -+ -- DocBook modules ...................................................... -- -+ -+@@ -49,65 +46,5 @@ -+ PUBLIC "-//OASIS//ENTITIES DocBook Character Entities V4.2//EN" -+ "dbcentx.mod" -+ -+- -- ...................................................................... -- -+- -- ISO entity sets ...................................................... -- -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" -+- "iso-dia.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" -+- "iso-num.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" -+- "iso-pub.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" -+- "iso-tech.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" -+- "iso-lat1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" -+- "iso-lat2.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" -+- "iso-grk1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" -+- "iso-grk2.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" -+- "iso-grk3.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" -+- "iso-grk4.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" -+- "iso-amsa.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" -+- "iso-amsb.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" -+- "iso-amsc.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" -+- "iso-amsn.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" -+- "iso-amso.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" -+- "iso-amsr.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" -+- "iso-box.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" -+- "iso-cyr1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" -+- "iso-cyr2.gml" -+- -+ -- End of catalog data for DocBook V4.2 ................................. -- -+ -- ...................................................................... -- -+diff -urNad docbook-4.5~/docbook-4.3/docbook.cat docbook-4.5/docbook-4.3/docbook.cat -+--- docbook-4.5~/docbook-4.3/docbook.cat 2004-03-31 13:44:16.000000000 +0200 -++++ docbook-4.5/docbook-4.3/docbook.cat 2007-03-09 16:53:47.000000000 +0100 -+@@ -22,9 +22,6 @@ -+ PUBLIC "-//OASIS//DTD DocBook V4.3//EN" -+ "docbook.dtd" -+ -+-PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" -+- "docbookx.dtd" -+- -+ -- ...................................................................... -- -+ -- DocBook modules ...................................................... -- -+ -+@@ -49,65 +46,5 @@ -+ PUBLIC "-//OASIS//ENTITIES DocBook Character Entities V4.3//EN" -+ "dbcentx.mod" -+ -+- -- ...................................................................... -- -+- -- ISO entity sets ...................................................... -- -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" -+- "iso-dia.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" -+- "iso-num.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" -+- "iso-pub.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" -+- "iso-tech.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" -+- "iso-lat1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" -+- "iso-lat2.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" -+- "iso-grk1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" -+- "iso-grk2.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" -+- "iso-grk3.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" -+- "iso-grk4.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" -+- "iso-amsa.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" -+- "iso-amsb.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" -+- "iso-amsc.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" -+- "iso-amsn.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" -+- "iso-amso.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" -+- "iso-amsr.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" -+- "iso-box.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" -+- "iso-cyr1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" -+- "iso-cyr2.gml" -+- -+ -- End of catalog data for DocBook V4.3 ................................. -- -+ -- ...................................................................... -- -+diff -urNad docbook-4.5~/docbook-4.4/docbook.cat docbook-4.5/docbook-4.4/docbook.cat -+--- docbook-4.5~/docbook-4.4/docbook.cat 2005-01-27 14:59:49.000000000 +0100 -++++ docbook-4.5/docbook-4.4/docbook.cat 2007-03-09 16:54:12.000000000 +0100 -+@@ -22,9 +22,6 @@ -+ PUBLIC "-//OASIS//DTD DocBook V4.4//EN" -+ "docbook.dtd" -+ -+-PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" -+- "docbookx.dtd" -+- -+ -- ...................................................................... -- -+ -- DocBook modules ...................................................... -- -+ -+@@ -52,65 +49,5 @@ -+ PUBLIC "-//OASIS//ENTITIES DocBook Character Entities V4.4//EN" -+ "dbcentx.mod" -+ -+- -- ...................................................................... -- -+- -- ISO entity sets ...................................................... -- -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" -+- "iso-dia.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" -+- "iso-num.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" -+- "iso-pub.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" -+- "iso-tech.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" -+- "iso-lat1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" -+- "iso-lat2.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" -+- "iso-grk1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" -+- "iso-grk2.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" -+- "iso-grk3.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" -+- "iso-grk4.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" -+- "iso-amsa.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" -+- "iso-amsb.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" -+- "iso-amsc.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" -+- "iso-amsn.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" -+- "iso-amso.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" -+- "iso-amsr.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" -+- "iso-box.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" -+- "iso-cyr1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" -+- "iso-cyr2.gml" -+- -+ -- End of catalog data for DocBook V4.4 ................................. -- -+ -- ...................................................................... -- -+diff -urNad docbook-4.5~/docbook-4.5/docbook.cat docbook-4.5/docbook-4.5/docbook.cat -+--- docbook-4.5~/docbook-4.5/docbook.cat 2006-10-03 15:27:50.000000000 +0200 -++++ docbook-4.5/docbook-4.5/docbook.cat 2007-03-09 16:54:41.000000000 +0100 -+@@ -22,9 +22,6 @@ -+ PUBLIC "-//OASIS//DTD DocBook V4.5//EN" -+ "docbook.dtd" -+ -+-PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" -+- "docbookx.dtd" -+- -+ -- ...................................................................... -- -+ -- DocBook modules ...................................................... -- -+ -+@@ -52,65 +49,5 @@ -+ PUBLIC "-//OASIS//ENTITIES DocBook Character Entities V4.5//EN" -+ "dbcentx.mod" -+ -+- -- ...................................................................... -- -+- -- ISO entity sets ...................................................... -- -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Diacritical Marks//EN" -+- "iso-dia.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" -+- "iso-num.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Publishing//EN" -+- "iso-pub.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES General Technical//EN" -+- "iso-tech.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN" -+- "iso-lat1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Latin 2//EN" -+- "iso-lat2.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Letters//EN" -+- "iso-grk1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Monotoniko Greek//EN" -+- "iso-grk2.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Greek Symbols//EN" -+- "iso-grk3.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" -+- "iso-grk4.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" -+- "iso-amsa.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" -+- "iso-amsb.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" -+- "iso-amsc.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" -+- "iso-amsn.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" -+- "iso-amso.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" -+- "iso-amsr.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Box and Line Drawing//EN" -+- "iso-box.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Russian Cyrillic//EN" -+- "iso-cyr1.gml" -+- -+-PUBLIC "ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" -+- "iso-cyr2.gml" -+- -+ -- End of catalog data for DocBook V4.5 ................................. -- -+ -- ...................................................................... -- ---- docbook-4.5.orig/debian/patches/11_fix_dbpoolx_mod_header_comment_pubid.dpatch -+++ docbook-4.5/debian/patches/11_fix_dbpoolx_mod_header_comment_pubid.dpatch -@@ -0,0 +1,60 @@ -+#! /bin/sh /usr/share/dpatch/dpatch-run -+## 11_fix_dbpoolx_mod_header_comment_pubid.dpatch by Adam Di Carlo <aph@debian.org> -+## and Daniel Leidert (dale) <daniel.leidert@wgdd.de>. -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: The header in dbpoolx.mod references a wrong Public-ID. This patch -+## DP: simply fixes the header comment. -+## DP: -+## DP: Reported upstream: -+## DP: <URL:http://sourceforge.net/tracker/index.php?func=detail&aid=1679712&group_id=21935&atid=384107> -+ -+@DPATCH@ -+diff -urNad docbook-4.5~/docbook-4.2/dbpoolx.mod docbook-4.5/docbook-4.2/dbpoolx.mod -+--- docbook-4.5~/docbook-4.2/dbpoolx.mod 2002-07-17 18:14:25.000000000 +0200 -++++ docbook-4.5/docbook-4.2/dbpoolx.mod 2007-03-10 08:31:23.000000000 +0100 -+@@ -50,7 +50,7 @@ -+ declaration that uses the public identifier shown below: -+ -+ <!ENTITY % dbpool PUBLIC -+- "-//OASIS//ELEMENTS DocBook XML Information Pool V4.2//EN" -++ "-//OASIS//ELEMENTS DocBook Information Pool V4.2//EN" -+ "dbpoolx.mod"> -+ %dbpool; -+ -+diff -urNad docbook-4.5~/docbook-4.3/dbpoolx.mod docbook-4.5/docbook-4.3/dbpoolx.mod -+--- docbook-4.5~/docbook-4.3/dbpoolx.mod 2004-03-31 13:43:24.000000000 +0200 -++++ docbook-4.5/docbook-4.3/dbpoolx.mod 2007-03-10 08:31:49.000000000 +0100 -+@@ -50,7 +50,7 @@ -+ declaration that uses the public identifier shown below: -+ -+ <!ENTITY % dbpool PUBLIC -+- "-//OASIS//ELEMENTS DocBook XML Information Pool V4.3//EN" -++ "-//OASIS//ELEMENTS DocBook Information Pool V4.3//EN" -+ "dbpoolx.mod"> -+ %dbpool; -+ -+diff -urNad docbook-4.5~/docbook-4.4/dbpoolx.mod docbook-4.5/docbook-4.4/dbpoolx.mod -+--- docbook-4.5~/docbook-4.4/dbpoolx.mod 2005-01-27 14:59:45.000000000 +0100 -++++ docbook-4.5/docbook-4.4/dbpoolx.mod 2007-03-10 08:32:00.000000000 +0100 -+@@ -50,7 +50,7 @@ -+ declaration that uses the public identifier shown below: -+ -+ <!ENTITY % dbpool PUBLIC -+- "-//OASIS//ELEMENTS DocBook XML Information Pool V4.4//EN" -++ "-//OASIS//ELEMENTS DocBook Information Pool V4.4//EN" -+ "dbpoolx.mod"> -+ %dbpool; -+ -+diff -urNad docbook-4.5~/docbook-4.5/dbpoolx.mod docbook-4.5/docbook-4.5/dbpoolx.mod -+--- docbook-4.5~/docbook-4.5/dbpoolx.mod 2006-10-03 15:27:50.000000000 +0200 -++++ docbook-4.5/docbook-4.5/dbpoolx.mod 2007-03-10 08:32:10.000000000 +0100 -+@@ -50,7 +50,7 @@ -+ declaration that uses the public identifier shown below: -+ -+ <!ENTITY % dbpool PUBLIC -+- "-//OASIS//ELEMENTS DocBook XML Information Pool V4.5//EN" -++ "-//OASIS//ELEMENTS DocBook Information Pool V4.5//EN" -+ "dbpoolx.mod"> -+ %dbpool; -+ ---- docbook-4.5.orig/debian/patches/12_fix_256119_and_turn_on_sgml_mode.dpatch -+++ docbook-4.5/debian/patches/12_fix_256119_and_turn_on_sgml_mode.dpatch -@@ -0,0 +1,117 @@ -+#! /bin/sh /usr/share/dpatch/dpatch-run -+## 12_fix_256119_and_turn_on_sgml_mode.dpatch by Daniel Leidert (dale) <daniel.leidert@wgdd.de> -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: Fixes broken element declarations by adding the tag omission characters -+## DP: for SGML and enable SGML features -+## DP: (closes: <URL:http://bugs.debian.org/256119>). -+## DP: -+## DP: <URL:http://packages.debian.org/changelogs/pool/main/d/docbook/current/changelog#versionversion4.4-1> -+ -+@DPATCH@ -+diff -urNad docbook-4.5~/docbook-4.3/dbpoolx.mod docbook-4.5/docbook-4.3/dbpoolx.mod -+--- docbook-4.5~/docbook-4.3/dbpoolx.mod 2007-03-10 09:01:12.000000000 +0100 -++++ docbook-4.5/docbook-4.3/dbpoolx.mod 2007-03-10 09:01:13.000000000 +0100 -+@@ -633,6 +633,9 @@ -+ -+ <!-- xml:base: base URI --> -+ -++<![%sgml.features;[ -++<!ENTITY % xml-base.attrib ""> -++]]> -+ <!ENTITY % xml-base.attrib -+ "xml:base CDATA #IMPLIED"> -+ -+diff -urNad docbook-4.5~/docbook-4.3/docbookx.dtd docbook-4.5/docbook-4.3/docbookx.dtd -+--- docbook-4.5~/docbook-4.3/docbookx.dtd 2004-03-31 13:43:20.000000000 +0200 -++++ docbook-4.5/docbook-4.3/docbookx.dtd 2007-03-10 09:01:13.000000000 +0100 -+@@ -59,7 +59,7 @@ -+ <!-- ...................................................................... --> -+ <!-- Enable SGML features ................................................. --> -+ -+-<!ENTITY % sgml.features "IGNORE"> -++<!ENTITY % sgml.features "INCLUDE"> -+ <![%sgml.features;[ -+ <!ENTITY % xml.features "IGNORE"> -+ ]]> -+diff -urNad docbook-4.5~/docbook-4.3/htmltblx.mod docbook-4.5/docbook-4.3/htmltblx.mod -+--- docbook-4.5~/docbook-4.3/htmltblx.mod 2004-03-31 13:43:24.000000000 +0200 -++++ docbook-4.5/docbook-4.3/htmltblx.mod 2007-03-10 09:01:13.000000000 +0100 -+@@ -63,6 +63,9 @@ -+ > -+ -+ <!-- Does not contain lang or dir because they are in %common.attribs --> -++<![%sgml.features;[ -++<!ENTITY % i18n ""> -++]]> -+ <!ENTITY % i18n -+ "xml:lang NMTOKEN #IMPLIED" -+ > -+@@ -92,11 +95,11 @@ -+ "valign (top|middle|bottom|baseline) #IMPLIED" -+ > -+ -+-<!ELEMENT colgroup (col)*> -+-<!ELEMENT col EMPTY> -+-<!ELEMENT tr (th|td)+> -+-<!ELEMENT th (%para.char.mix; | %tabentry.mix;)*> -+-<!ELEMENT td (%para.char.mix; | %tabentry.mix;)*> -++<!ELEMENT colgroup %ho; (col)*> -++<!ELEMENT col %ho; EMPTY> -++<!ELEMENT tr %ho; (th|td)+> -++<!ELEMENT th %ho; (%para.char.mix; | %tabentry.mix;)*> -++<!ELEMENT td %ho; (%para.char.mix; | %tabentry.mix;)*> -+ -+ <!ATTLIST colgroup -+ %attrs; -+@@ -206,7 +209,7 @@ -+ summary CDATA #IMPLIED -+ width CDATA #IMPLIED -+ border CDATA #IMPLIED -+- rules (none | groups | rows | cols | all) #IMPLIED -++ rules CDATA #IMPLIED -+ cellspacing CDATA #IMPLIED -+ cellpadding CDATA #IMPLIED -+ align (left|center|right) #IMPLIED -+diff -urNad docbook-4.5~/docbook-4.4/docbookx.dtd docbook-4.5/docbook-4.4/docbookx.dtd -+--- docbook-4.5~/docbook-4.4/docbookx.dtd 2005-01-27 14:59:45.000000000 +0100 -++++ docbook-4.5/docbook-4.4/docbookx.dtd 2007-03-10 09:01:13.000000000 +0100 -+@@ -61,7 +61,7 @@ -+ <!-- ...................................................................... --> -+ <!-- Enable SGML features ................................................. --> -+ -+-<!ENTITY % sgml.features "IGNORE"> -++<!ENTITY % sgml.features "INCLUDE"> -+ <![%sgml.features;[ -+ <!ENTITY % xml.features "IGNORE"> -+ ]]> -+diff -urNad docbook-4.5~/docbook-4.4/htmltblx.mod docbook-4.5/docbook-4.4/htmltblx.mod -+--- docbook-4.5~/docbook-4.4/htmltblx.mod 2005-01-27 14:59:45.000000000 +0100 -++++ docbook-4.5/docbook-4.4/htmltblx.mod 2007-03-10 09:01:13.000000000 +0100 -+@@ -63,6 +63,9 @@ -+ > -+ -+ <!-- Does not contain lang or dir because they are in %common.attribs --> -++<![%sgml.features;[ -++<!ENTITY % i18n ""> -++]]> -+ <!ENTITY % i18n -+ "xml:lang NMTOKEN #IMPLIED" -+ > -+@@ -92,11 +95,11 @@ -+ "valign (top|middle|bottom|baseline) #IMPLIED" -+ > -+ -+-<!ELEMENT colgroup (col)*> -+-<!ELEMENT col EMPTY> -+-<!ELEMENT tr (th|td)+> -+-<!ELEMENT th (%para.char.mix; | %tabentry.mix; | table | informaltable)*> -+-<!ELEMENT td (%para.char.mix; | %tabentry.mix; | table | informaltable)*> -++<!ELEMENT colgroup %ho; (col)*> -++<!ELEMENT col %ho; EMPTY> -++<!ELEMENT tr %ho; (th|td)+> -++<!ELEMENT th %ho; (%para.char.mix; | %tabentry.mix; | table | informaltable)*> -++<!ELEMENT td %ho; (%para.char.mix; | %tabentry.mix; | table | informaltable)*> -+ -+ <!ATTLIST colgroup -+ %attrs; ---- docbook-4.5.orig/debian/patches/10_fix_101779_mention_artheader_to_articleinfo_change.dpatch -+++ docbook-4.5/debian/patches/10_fix_101779_mention_artheader_to_articleinfo_change.dpatch -@@ -0,0 +1,33 @@ -+#! /bin/sh /usr/share/dpatch/dpatch-run -+## 10_fix_101779_mention_artheader_to_articleinfo_change.dpatch by -+## Adam Di Carlo <aph@debian.org>. -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: The removal of ArtHeader in 4.0 is not documented in ChangeLog. This -+## DP: patch fixes it (closes: <URL:http://bugs.debian.org/bug=101779>). -+## DP: -+## DP: <URL:http://packages.debian.org/changelogs/pool/main/d/docbook/current/changelog#versionversion4.1-5> -+ -+@DPATCH@ -+diff -urNad docbook-4.5~/ChangeLog.upstream docbook-4.5/ChangeLog.upstream -+--- docbook-4.5~/ChangeLog.upstream 2007-03-09 14:36:17.000000000 +0100 -++++ docbook-4.5/ChangeLog.upstream 2007-03-14 19:35:01.000000000 +0100 -+@@ -475,6 +475,7 @@ -+ - Added synopsis markup for modern programming languages (e.g, object -+ oriented languages like Java, C++, and IDL) -+ - Renamed DocInfo to PrefaceInfo, ChapterInfo, AppendixInfo, etc. -++ (and ArtHeader to ArticleInfo) -+ -+ Other: -+ -+diff -urNad docbook-4.5~/docbook-4.1/40chg.txt docbook-4.5/docbook-4.1/40chg.txt -+--- docbook-4.5~/docbook-4.1/40chg.txt 2000-06-19 16:50:28.000000000 +0200 -++++ docbook-4.5/docbook-4.1/40chg.txt 2007-03-14 19:34:21.000000000 +0100 -+@@ -29,6 +29,7 @@ -+ - Added synopsis markup for modern programming languages (e.g, object -+ oriented languages like Java, C++, and IDL) -+ - Renamed DocInfo to PrefaceInfo, ChapterInfo, AppendixInfo, etc. -++ (and ArtHeader to ArticleInfo) -+ - Comment was renamed Remark -+ - InterfaceDefinition was removed -+ ---- docbook-4.5.orig/debian/examples/docbk.sgml -+++ docbook-4.5/debian/examples/docbk.sgml -@@ -0,0 +1,2 @@ -+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook//EN"> -+<book></book> ---- docbook-4.5.orig/debian/examples/docbk42.sgml -+++ docbook-4.5/debian/examples/docbk42.sgml -@@ -0,0 +1,2 @@ -+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.2//EN"> -+<book></book> ---- docbook-4.5.orig/debian/examples/docbk43.sgml -+++ docbook-4.5/debian/examples/docbk43.sgml -@@ -0,0 +1,2 @@ -+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.3//EN"> -+<book></book> ---- docbook-4.5.orig/debian/examples/docbk44.sgml -+++ docbook-4.5/debian/examples/docbk44.sgml -@@ -0,0 +1,2 @@ -+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.4//EN"> -+<book></book> ---- docbook-4.5.orig/debian/examples/docbk45.sgml -+++ docbook-4.5/debian/examples/docbk45.sgml -@@ -0,0 +1,2 @@ -+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.5//EN"> -+<book></book> ---- docbook-4.5.orig/debian/examples/Makefile -+++ docbook-4.5/debian/examples/Makefile -@@ -0,0 +1,22 @@ -+SRCS := $(wildcard *.sgml) -+NSGMLS := $(shell if command -v onsgmls 2>/dev/null; then \ -+ : ;\ -+ elif command -v nsgmls 2>/dev/null; then \ -+ : ;\ -+ else \ -+ echo "false" ;\ -+ echo "warning: no nsgmls found" >&2 ;\ -+ fi) -+ -+NSGMLSARGS= -+ -+.PHONY: validate -+validate: $(addsuffix .nsgmls,$(SRCS)) -+ -+%.nsgmls : % -+ $(NSGMLS) -E1 -wall $(NSGMLSARGS) -gues $< -+ -+.PHONY: clean -+clean: -+ rm -f *.html *~ -+ ---- docbook-4.5.orig/debian/control -+++ docbook-4.5/debian/control -@@ -0,0 +1,33 @@ -+Source: docbook -+Section: text -+Priority: optional -+Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org> -+Uploaders: Adam Di Carlo <aph@debian.org>, Daniel Leidert (dale) <daniel.leidert@wgdd.de> -+Build-Depends: debhelper (>= 4.1.31), dpatch -+Standards-Version: 3.7.2 -+Homepage: http://www.oasis-open.org/docbook/sgml/ -+XS-Vcs-Browser: http://svn.debian.org/wsvn/debian-xml-sgml/packages/docbook/trunk/ -+XS-Vcs-Svn: svn://svn.debian.org/svn/debian-xml-sgml/packages/docbook/ -+ -+Package: docbook -+Architecture: all -+Depends: sgml-data (>= 1.5.0), ${misc:Depends} -+Conflicts: docbook-xml (<= 4.4-4) -+Suggests: psgml, docbook-dsssl, docbook-xml, docbook-defguide -+Description: standard SGML representation system for technical documents -+ DocBook is an SGML document type definition (DTD) that is well-suited -+ to books, articles, or reference documentation about technical -+ matters, systems, or software (although it is by no means limited to -+ these applications). It has emerged as an open and standard DTD in the -+ software industry, and is used as the documentation system of choice -+ for many free software projects. -+ . -+ This package contains the SGML DTD for DocBook, which describes -+ the formal structure for documents following this format. If you -+ wish to author DocBook documents using XML rather than SGML, use the -+ 'docbook-xml' package. You will need other packages in order to edit -+ (psgml), validate (opensp) or format (docbook-xsl, docbook-dsssl) -+ DocBook documents. -+ . -+ This package includes the 2.4.1, 3.0, 3.1, 4.0, 4.1, 4.2, 4.3, 4.4 and -+ 4.5 versions of the DocBook SGML DTD. ---- docbook-4.5.orig/debian/compat -+++ docbook-4.5/debian/compat -@@ -0,0 +1 @@ -+4 ---- docbook-4.5.orig/debian/watch -+++ docbook-4.5/debian/watch -@@ -0,0 +1,4 @@ -+# See uscan(1) for format -+ -+version=3 -+http://www.oasis-open.org/docbook/sgml/4\.([\d]+)/docbook-([\d\.]+).zip ---- docbook-4.5.orig/debian/docbook.examples -+++ docbook-4.5/debian/docbook.examples -@@ -0,0 +1 @@ -+debian/examples/* ---- docbook-4.5.orig/debian/changelog -+++ docbook-4.5/debian/changelog -@@ -0,0 +1,362 @@ -+docbook (4.5-4) unstable; urgency=low -+ -+ * debian/control: Homepage field transition. -+ (Suggests): Added docbook-defguide. -+ * debian/docbook.postinst: Removed. Contains only pre-etch legacy stuff. -+ * debian/README.Debian: Removed or replaced references to non-existing -+ packages. -+ * debian/watch: Added watch file. -+ -+ -- Daniel Leidert (dale) <daniel.leidert@wgdd.de> Wed, 26 Sep 2007 21:21:26 +0200 -+ -+docbook (4.5-3) unstable; urgency=medium -+ -+ * debian/control (Maintainer, Uploaders): Set the Debian XML/SGML team as -+ maintainer. -+ * debian/docbook.examples: Fixed examples location: will re-add them back -+ to the package. -+ * debian/rules: Removed bashisms (closes: #422114). Thanks to Sebastian -+ Dröge for the report. -+ -+ -- Daniel Leidert (dale) <daniel.leidert@wgdd.de> Thu, 03 May 2007 19:46:21 +0200 -+ -+docbook (4.5-2) unstable; urgency=low -+ -+ * Upload to unstable. -+ -+ [ Daniel Leidert ] -+ * debian/rules (get-orig-source): Make the target compatible with the "Best -+ Packaging Practices" reference. -+ -+ -- Daniel Leidert (dale) <daniel.leidert@wgdd.de> Sat, 14 Apr 2007 19:49:00 +0200 -+ -+docbook (4.5-1) experimental; urgency=low -+ -+ * New upstream release DocBook SGML 4.5 added (closes: #413166). -+ -+ [ Daniel Leidert ] -+ * catalog: Made latest DocBook SGML 4.5 the default (closes: #413304). -+ * debian/control: Added XS-Vcs-Browser and XS-Vcs-Svn fields. -+ (Build-Depends-Indep): Fixed debhelper build dependency to be listed in -+ Build-Depends. -+ (Build-Depends): Added dpatch. -+ (Uploaders): Added the Debian XML/SGML group and myself (closes: #358522). -+ (Standards-Version): Bump to latest standards version 3.7.2. -+ (Description): Added newly added DocBook version. -+ * debian/copyright: Updated the packaging and copyright information. -+ * debian/rules: Added get-orig-source and dpatch targets. Cleaned the file a -+ lot. The installation of files was moved from the external -+ install_docbook.sh script to dh_install calls. The .links, .install and -+ .sgmlcatalogs debhelper files are created by debian/rules itself (atm I -+ don't remove them in the clean target). -+ (binary-indep): Fixed the dh_installdocs call to include Adams -+ README.docbook.dcl, that was not included in the package. -+ (debian/docbook.install, debian/docbook.links): Made the dbgenent.mod -+ files config-files. -+ * debian/patches/00list: Added. Moved all existing changes to dpatch patches -+ and enabled them here. -+ * debian/patches/01_remove_entity_sets_and_dcl_from_catalogs.dpatch: Added. -+ * debian/patches/10_fix_101779_mention_artheader_to_articleinfo_change.dpatch: -+ Added. -+ * debian/patches/11_fix_dbpoolx_mod_header_comment_pubid.dpatch: Added. -+ * debian/patches/12_fix_256119_and_turn_on_sgml_mode.dpatch: Added. -+ * debian/examples/docbk*.sgml: Added two new examples for DocBook 4.5 and -+ added the missing newlines to the existing examples. -+ * debian/docbook.examples: Added. -+ * debian/postinst: Renamed to docbook.postinst. -+ * debian/README.debian: Renamed to README.Debian. -+ * debian/install_docbook.sh: Removed. See debian/rules changes. -+ * debian/TODO: Removed (implemented the only item). -+ * debian/watch: Removed (empty). -+ -+ -- Daniel Leidert (dale) <daniel.leidert@wgdd.de> Sat, 10 Mar 2007 09:32:33 +0100 -+ -+docbook (4.4-1) unstable; urgency=low -+ -+ * acknowledge NMU; closes: #301786 -+ * new upstream version; closes: #339774 -+ * docbook4{3,4}/docbookx.dtd: turn on SGML mode -+ * docbook4{3,4}: sync with dbpoolx.mod and htmltblx.mod from -+ docbook-xml; closes: #256119 -+ * conflict with docbook-xml prior to 4.4-5, otherwise the 4.3 and 4.4 -+ DTDs don't work -+ * docbook4.3 catalog: don't provide "-//OASIS//DTD DocBook XML V4.3//EN" -+ * add really basic docbook 4.2, 4.3, and 4.4 books to test with -+ -+ -- Adam Di Carlo <aph@debian.org> Thu, 25 May 2006 19:09:05 -0400 -+ -+docbook (4.3-1.1) unstable; urgency=high -+ -+ * Non-maintainer upload. -+ * High-urgency upload for sarge-targetted RC bugfix. -+ * Drop use of symlinks for finding dangling links, as we can do the -+ same using a find command; thanks to Joey Hess for the patch. -+ Closes: #301786. -+ -+ -- Steve Langasek <vorlon@debian.org> Wed, 6 Apr 2005 11:24:24 -0700 -+ -+docbook (4.3-1) unstable; urgency=low -+ -+ * new upstream version; closes: #243666 -+ * make the usual array of minor corrections in upstream catalogs -+ * minor package description changes -+ * postinst legacy remove is more conditional and more robust; hopefully, -+ closes: #242833 -+ * really don't register "-//OASIS//DTD DocBook XML V4.2//EN" in -+ catalog.xml -+ -+ -- Adam Di Carlo <aph@debian.org> Tue, 15 Jun 2004 22:15:02 -0400 -+ -+docbook (4.2-3) unstable; urgency=low -+ -+ * stop providing "-//OASIS//DTD DocBook XML V4.2//EN", that is in the -+ docbook-xml package -+ * policy compliance updated to 3.5.8, no changes needed -+ * debhelper 4 compat mode -+ * use new dh_installcatalog, it simplifies our maintainer scripts -+ * remove build-depends on M4, we don't need to process maintainer -+ scripts anymore -+ * remove suggests on sp or jade or docbook-xml, add suggests for -+ docbook-dsssl and docbook-doc -+ * improve the package synopsis and description, add the Homepage -+ * stop using sgml-catalog-check.pl from sgml-data during build, the -+ /usr/share/sgml symlinking is no longer needed (SGML Policy update -+ pending) -+ -+ -- Adam Di Carlo <aph@debian.org> Tue, 25 Feb 2003 02:18:52 -0500 -+ -+docbook (4.2-2) unstable; urgency=low -+ -+ * SGML catalogs should be named 'catalog' according to policy; retain -+ the 'docbook.cat' as a symlink in case anyone is using that directly -+ -+ -- Adam Di Carlo <aph@debian.org> Mon, 20 Jan 2003 04:44:52 -0500 -+ -+docbook (4.2-1) unstable; urgency=low -+ -+ * new upstream version, closes: #155105 -+ * latest DocBook version bumped to 4.2 -+ -+ -- Adam Di Carlo <aph@debian.org> Wed, 7 Aug 2002 01:12:49 -0400 -+ -+docbook (4.1.99really4.2.cr1-2) unstable; urgency=low -+ -+ * oops, remove ISO entity sets from docbook 4.2cr1 catalog -+ * minor typo in generalized.cat fixed -+ -+ -- Adam Di Carlo <aph@debian.org> Sun, 31 Mar 2002 01:40:26 -0500 -+ -+docbook (4.1.99really4.2.cr1-1) unstable; urgency=low -+ -+ * new upstream version, pre-release of docbook 4.2; -+ note that docbook 4.1 is still considered the latest version and -+ latest 4.x version until 4.2 is actually released -+ * policy checked up to 3.5.6, no changes required -+ * disable DTDDECL in generalized.cat, I think this just slipped through -+ * debian/rules: some housekeeping -+ -+ -- Adam Di Carlo <aph@debian.org> Sun, 31 Mar 2002 01:28:04 -0500 -+ -+docbook (4.1-6) unstable; urgency=low -+ -+ * another cut at the package description, hopefully it satisfies the -+ user; closes: #112021 -+ * debian/rules: installing *everything* as documentation was not my -+ intention in the last release, fix that -+ * require sgml-data 1.5.3 or better, which calls an element an element -+ when making the creepy symlinks; closes: #51043 -+ -+ -- Adam Di Carlo <aph@debian.org> Tue, 2 Oct 2001 03:06:21 -0400 -+ -+docbook (4.1-5) unstable; urgency=low -+ -+ * all docbook catalog files now have "OVERRIDE YES", which forces the -+ PUBID rather than the SYSID in DTD declarations; closes: #97330 -+ * correct upstream 40chg.txt to notate the change from ArtHeader to -+ ArticleInfo; closes: #101779 -+ * README.Debian rewritten; closes: #106379 -+ * it's apparently not nice to call dh_installdocs more than once per -+ package, so stop doing that; closes#98440 -+ -+ -- Adam Di Carlo <aph@debian.org> Tue, 2 Oct 2001 01:49:30 -0400 -+ -+docbook (4.1-4) unstable; urgency=low -+ -+ * debian/rules: re-work fix for files in debian not preserving execute -+ bit -+ closes: #90627 -+ -+ -- Adam Di Carlo <aph@debian.org> Sun, 8 Apr 2001 14:37:42 -0400 -+ -+docbook (4.1-3) unstable; urgency=low -+ -+ * debian/control: build-depends-indep includes m4 -+ * debian/rules: cope with my local CVS not preserving executable bit, -+ making the source unbuildable -+ closes: #90627 -+ -+ -- Adam Di Carlo <aph@debian.org> Thu, 22 Mar 2001 02:23:56 -0500 -+ -+docbook (4.1-2) unstable; urgency=low -+ -+ * disable docbook.dcl as DTDDECL, otherwise lots of otherwise valid SGML -+ files will break (when using DTDDECL comprehending processors like -+ OpenJade, anyhow). For more info, see README.docbook.dcl. -+ * include docbook 4.0 -+ closes: #68666 -+ -+ -- Adam Di Carlo <aph@debian.org> Wed, 21 Mar 2001 03:37:38 -0500 -+ -+docbook (4.1-1) unstable; urgency=low -+ -+ * new maintainer, with permission from Mark Eichin -+ closes: #19682, #19683, #36956, #47375, #50243, #51032, #68033 -+ closes: #87325, #88679 -+ * debian/control: require new sgml-base and sgml-data; suggest -+ docbook-xml; fix a grammar error in the description -+ * transition to new SGML standard system, /usr/share/sgml, and delegated -+ catalogs -+ closes: #90034 -+ * rework the maintainer scripts accordingly; use m4 to dynamically set -+ some variables; move the removal work from postrm to prerm; don't -+ bother scrubbing legacy junk in prerm, since postinst configure -+ already ran, what's the point? -+ * provide new catalog entries for just referring to DocBook, generalized -+ to mean the last recommended DocBook, or the latest DocBook v4, or the -+ latest DocBook v3. -+ * delegated catalogs have proper DTDDECLs -+ closes: #63046 (again) -+ * debian/rules: stop using debstd -+ closes: #90122 -+ * already fixed in earlier versions -+ closes: #90125 -+ * debian/control: add Build-Depends-Indep; update standards to 3.5.2 -+ * debian/copyright: update maintainership info and add coverage of the -+ debian integration scripts -+ -+ -- Adam Di Carlo <aph@debian.org> Mon, 19 Mar 2001 01:56:38 -0500 -+ -+docbook (4.1-0.2) unstable; urgency=low -+ -+ * non-maintainer upload -+ * sgml-data/sgml-catalog-check.pl location moved -+ closes: #88679 -+ * debian/postrm: fix some of the legacy FPI removal logic -+ closes: #87325 -+ * debian/postinst: analogous fix, and remove some scrubbing of the SGML -+ catalog which really seemed overreaching (such as fudging with -+ SGMLDECL, and stuff which really ought to be handled by -+ install-sgmlcatalog) -+ -+ -- Adam Di Carlo <aph@debian.org> Sat, 17 Mar 2001 16:54:59 -0500 -+ -+docbook (4.1-0.1) unstable; urgency=low -+ -+ * NMU because Mark lacks time. -+ * New upstream release (Closes: #68033). -+ * Do not include 4.0 DTD because 4.1 has no user-level changes from -+ 4.0. -+ * Install doc files into /usr/share/doc/ as per policy (Closes: -+ #50243, #51032). -+ * Uncommented DTDDECL entries from the catalog (Closes: #63046). -+ * Updated download location and copyright notice. -+ * Commented out obsolete line in debian/watch. -+ -+ -- Yann Dirson <dirson@debian.org> Tue, 1 Aug 2000 01:01:59 +0200 -+ -+docbook (3.1-2) unstable; urgency=low -+ -+ * debian/control: fix Maintainer realname for consistency. -+ -+ -- Mark W. Eichin <eichin@thok.org> Wed, 3 Nov 1999 16:14:46 -0500 -+ -+docbook (3.1-1) unstable; urgency=low -+ -+ * Thanks for all the work; closing the bugs for real and updating my -+ email addresses. closes: #19682, #19683, #36956, #47375. -+ -+ -- Mark W. Eichin <eichin@thok.org> Wed, 3 Nov 1999 00:43:12 -0500 -+ -+docbook (3.1-0.4) unstable; urgency=low -+ -+ * NMU so it can be removed when install-sgmlcatalog isn't present. -+ (Closes: #47375). -+ -+ -- J.H.M. Dassen (Ray) <jdassen@debian.org> Sat, 30 Oct 1999 14:31:46 +0200 -+ -+docbook (3.1-0.3) unstable; urgency=low -+ -+ * non-maintainer release, blessed by Mark Eichin -+ * at the suggestion of Norm Walsh, retain DTD and entity file name -+ (closes Bug#36956) -- he also suggests that we don't split entities -+ into a separate dir, which is a reasonable thought, but I leave it to -+ others to file a bug if they agree with Norm. -+ -+ -- Adam Di Carlo <aph@debian.org> Sat, 22 May 1999 16:43:06 -0400 -+ -+docbook (3.1-0.2) unstable; urgency=low -+ -+ * non-maintainer release -+ * docbook.cat: fix problems with some system identifiers, bugs I -+ introduced -+ * use script from sgml-data to create nice SGML links (completes closing -+ of Bug#19682) -+ -+ -- Adam Di Carlo <aph@debian.org> Fri, 26 Mar 1999 04:25:09 -0500 -+ -+docbook (3.1-0.1) unstable; urgency=low -+ -+ * non-maintainer release -+ * new upstream version (blessed by Mark Eichin) -+ * deliver docbook 2.4.1, 3.0, and 3.1 DTDs (closes Bug#19683) -+ * put DTDs, entities, and declarations in standard locations under -+ /usr/lib/sgml; make symlinks under there too in compliance with the -+ sgml-base subpolicy (closes Bug#19682) -+ * debian/control: bump standards version to 2.5.0, reconcile priority to -+ what it is in the archive, update description -+ * debian/rules: some modularization -+ * debian/copyright: updated -+ * README.debian: adding some pointer on other packages and the home page -+ -+ -- Adam Di Carlo <aph@debian.org> Fri, 26 Mar 1999 01:36:31 -0500 -+ -+docbook (3.0-5) unstable; urgency=low -+ -+ * debian/rules: use install -m 0644 so text files don't get installed -+ gratuitously executable (lintian). -+ -+ -- Mark Eichin <eichin@kitten.gen.ma.us> Wed, 29 Apr 1998 05:39:56 -0400 -+ -+docbook (3.0-4) unstable; urgency=low -+ -+ * docbook.cat: comment out DTDDECL to avoid warnings from jade. Removed -+ ISO entity pointers, since they are now supplied by sgml-data. -+ -+ -- Mark Eichin <eichin@kitten.gen.ma.us> Tue, 7 Apr 1998 02:39:48 -0400 -+ -+docbook (3.0-3) unstable; urgency=low -+ -+ * debian/postinst, debian/postrm: use sgml-base like jade does. -+ * debian/control: depend on sgml-base now. -+ -+ -- Mark W. Eichin <eichin@kitten.gen.ma.us> Tue, 4 Nov 1997 18:18:18 -0500 -+ -+docbook (3.0-2) unstable; urgency=low -+ -+ * debian/{postinst, postrm}: change md5sum markers to make them easier -+ to find later (and consistent with jade); add cleanup of older form. -+ -+ -- Mark W. Eichin <eichin@kitten.gen.ma.us> Tue, 1 Jul 1997 01:08:31 -0400 -+ -+docbook (3.0-1) unstable; urgency=low -+ -+ * Initial Release. -+ * docbook.cat: point to davenport subdir. -+ * rules: install everything, under binary-indep. -+ * debian/{postinst, postrm}: use md5sum markers to add/remove catalog -+ entries. Also nuke SGMLDECL line (by wrapping it in an sgml -- comment -+ --.) -+ -+ -- Mark Eichin <eichin@kitten.gen.ma.us> Mon, 30 Jun 1997 14:11:38 -0400 -+ -+ ---- docbook-4.5.orig/debian/copyright -+++ docbook-4.5/debian/copyright -@@ -0,0 +1,39 @@ -+This package was debianized by Mark Eichin <eichin@thok.org> on Mon, -+30 Jun 1997 14:11:38 -0400. It is currently maintained by Adam Di -+Carlo <aph@debian.org> and the Debian XML/SGML group -+<debian-xml-sgml-devel@lists.alioth.debian.org>. No changes were made -+to the upstream version of these materials, although the provided SGML -+Open catalogs were trimmed or enhanced to suit Debian's SGML -+infrastructure. All Debian integration scripts and packages are under -+the GPL v2 or better, a copy of which can be found on Debian systems -+in '/usr/share/common-licenses/GPL'. -+ -+Download: -+ -+ The original upstream materials may be downloaded from -+ <URL:http://www.oasis-open.org/docbook/sgml/>. This process is -+ transparent via the `get-orig-source' target in debian/rules. -+ -+Copyright: -+ -+ Copyright 1992-2006 HaL Computer Systems, Inc., -+ O'Reilly & Associates, Inc., ArborText, Inc., Fujitsu Software -+ Corporation, orman Walsh, un Microsystems, Inc., and the -+ Organization for the Advancement of Structured Information -+ Standards (OASIS). -+ -+License and Warranty: -+ -+ Permission to use, copy, modify and distribute the DocBook DTD and -+ its accompanying documentation for any purpose and without fee is -+ hereby granted in perpetuity, provided that the above copyright -+ notice and this paragraph appear in all copies. The copyright -+ holders make no representation about the suitability of the DTD for -+ any purpose. It is provided "as is" without expressed or implied -+ warranty. -+ -+ If you modify the DocBook DTD in any way, except for declaring and -+ referencing additional sets of general entities and declaring -+ additional notations, label your DTD as a variant of DocBook. See -+ the maintenance documentation for more information. -+ ---- docbook-4.5.orig/debian/rules -+++ docbook-4.5/debian/rules -@@ -0,0 +1,121 @@ -+#!/usr/bin/make -f -+# Made with the aid of debmake, by Christoph Lameter, -+# based on the sample debian/rules file for GNU hello by Ian Jackson. -+ -+PACKAGE := docbook -+ -+include /usr/share/dpatch/dpatch.make -+ -+ -+debian/docbook.install: -+ set -ex ; \ -+ touch $@ ; \ -+ for db in docbook-* ; do \ -+ dbver=`echo $${db} | sed -e 's/docbook-//g'` ; \ -+ for file in $${db}/*.dcl $${db}/*.dtd $${db}/*.mod ; do \ -+ if [ $${file} != $${db}/dbgenent.mod ] ; then \ -+ echo "$${file} usr/share/sgml/docbook/dtd/$${dbver}" >> $@ ; \ -+ else \ -+ echo "$${file} etc/sgml/docbook/$${dbver}" >> $@ ; \ -+ fi ; \ -+ done ; \ -+ done -+ -+debian/docbook.links: -+ set -ex ; \ -+ touch $@ ; \ -+ for db in docbook-* ; do \ -+ dbver=`echo $${db} | sed -e 's/docbook-//g'` ; \ -+ [ -f $${db}/dbgenent.mod ] && \ -+ echo -n "etc/sgml/docbook/$${dbver}/dbgenent.mod " >> $@ && \ -+ echo "usr/share/sgml/docbook/dtd/$${dbver}/dbgenent.mod" >> $@ ; \ -+ [ -f $${db}/docbook.cat ] && \ -+ echo "usr/share/sgml/docbook/dtd/$${dbver}/catalog usr/share/sgml/docbook/dtd/$${dbver}/docbook.cat" >> $@ ; \ -+ done -+ -+debian/docbook.sgmlcatalogs: -+ set -ex ; \ -+ touch $@ ; \ -+ echo "catalog /usr/share/sgml/docbook/dtd/catalog" > $@ ; \ -+ for db in docbook-* ; do \ -+ dbver=`echo $${db} | sed -e 's/docbook-//g'` ; \ -+ [ -f $${db}/docbook.cat ] && \ -+ echo "$${db}/docbook.cat /usr/share/sgml/docbook/dtd/$${dbver}/catalog" >> $@ ; \ -+ done -+ -+build: patch-stamp build-stamp -+ -+build-stamp: debian/docbook.install debian/docbook.links debian/docbook.sgmlcatalogs -+ dh_testdir -+ touch build-stamp -+ -+clean: unpatch -+ dh_testdir -+ dh_testroot -+ rm -f build-stamp patch-stamp -+ rm -f debian/docbook.install \ -+ debian/docbook.links \ -+ debian/docbook.sgmlcatalogs -+ dh_clean -+ -+install: build -+ dh_testdir -+ dh_testroot -+ dh_clean -k -+ dh_installdirs -+ -+binary-indep: build -+ dh_testdir -+ dh_testroot -+ dh_installchangelogs ChangeLog.upstream -+ dh_install -+ dh_installdocs debian/README.docbook.dcl -+ dh_installexamples -+ dh_installcatalogs -+ dh_link -+ find $(CURDIR)/debian/$(PACKAGE) -type l -follow >/dev/null # exits 1 on broken links -+ dh_compress -+ dh_fixperms -+ dh_installdeb -+ dh_gencontrol -+ dh_md5sums -+ dh_builddeb -+ -+binary-arch: build -+ -+binary: binary-indep binary-arch -+ -+.PHONY: build clean binary binary-arch binary-indep -+ -+# This following code is used to create the .orig.tar.gz tarball. -+# Use it to prepare it for a new release. -+ -+version=$(shell dpkg-parsechangelog | sed -n -e 's/^Version: \(.*\)-[^-]*/\1/p') -+ -+.PHONY: get-orig-source -+get-orig-source: -+ set -ex ; \ -+ TMPDIR=`mktemp -d docbook-$(version).orig` ; \ -+ touch "$$TMPDIR"/ChangeLog.upstream ; \ -+ for db in 4.5 4.4 4.3 4.2 ; do \ -+ mkdir -p "$$TMPDIR"/docbook-$${db} ; \ -+ dbzip=docbook-$${db}.zip ; \ -+ wget -P "$$TMPDIR" http://www.oasis-open.org/docbook/sgml/$${db}/"$$dbzip" ; \ -+ unzip -d "$$TMPDIR"/docbook-$${db} "$$TMPDIR"/"$$dbzip" ; \ -+ rm -f "$$TMPDIR"/"$$dbzip" ; \ -+ [ -f "$$TMPDIR"/docbook-$${db}/ChangeLog ] && \ -+ cat "$$TMPDIR"/docbook-$${db}/ChangeLog >> "$$TMPDIR"/ChangeLog.upstream ; \ -+ done; \ -+ for db in 4.1 4.0 3.1 3.0 2.4.1 ; do \ -+ mkdir -p "$$TMPDIR"/docbook-$${db} ; \ -+ dbver=`echo $${db} | sed -e 's/\.//g'` ; \ -+ dbzip=docbk"$$dbver".zip ; \ -+ wget -P "$$TMPDIR" http://www.oasis-open.org/docbook/sgml/$${db}/"$$dbzip" ; \ -+ unzip -d "$$TMPDIR"/docbook-$${db} "$$TMPDIR"/"$$dbzip" ; \ -+ rm -f "$$TMPDIR"/"$$dbzip" ; \ -+ cat "$$TMPDIR"/docbook-$${db}/"$$dbver"chg.txt >> "$$TMPDIR"/ChangeLog.upstream ; \ -+ done ; \ -+ find "$$TMPDIR" -type f ! -perm 644 -exec chmod 644 "{}" ";" ; \ -+ GZIP=-9 tar -czf $(CURDIR)/docbook_${version}.orig.tar.gz "$$TMPDIR" ; \ -+ rm -rf "$$TMPDIR" -+ ---- docbook-4.5.orig/debian/README.docbook.dcl -+++ docbook-4.5/debian/README.docbook.dcl -@@ -0,0 +1,98 @@ -+From: Adam Di Carlo <adam@onshore.com> -+Subject: DOCBOOK: objection to docbook.dcl -+To: docbook@lists.oasis-open.org -+Cc: docbook-tc@oasis-open.org -+Date: Wed, 21 Mar 2001 02:35:31 -0500 -+ -+ -+Shipped with the DocBook DTDs from 2.4.1 and up is 'docbook.dcl', an -+SGML declaration for use with DocBook documents. However, this -+declartion is unnecessarily restrictive, to the level where it is -+rather cumbersome to implement. -+ -+My argument is that the DocBook declaration should diverge from the SP -+(and OpenSP) implied declarations only where the divergance expresses -+a real necessity to diverge. This is based on the principle that -+software (including SGML parsers) should be tolerant of what they -+accept. The unnecessarily broad divergance of the shipped Docbook -+declaration puts a burden on document engineers using DocBook. -+ -+I am considering here only the DocBook SGML DTD, since I presume the -+Declaration is rather irrelevant for XML files, since all XML files -+have the same XML declaration applied to them. -+ -+I consider here 'docbook.dcl' as shipped with DocBook 4.1. -+ -+Major problems: -+ -+ OMITTAG is turned off (why?) -+ -+ NAMELEN is too short -+ -+ Document Character set is too restrictive -+ -+ SUBDOC is turned off (why?) -+ -+ -+Description: -+ -+* OMITTAG is turned off -+ -+'OMITTAG' is turned off in 'docbook.dcl', disallowing markup -+minimization of any sort. This is on in the implied declaration of -+both Jade and OpenJade. This creates problems because documents using -+the default declaration for their parser will have a valid document, -+but if the user decides to be more fasidious and user the docbook SGML -+declaration, sudden their document will not be valid. -+ -+The major problem is that trying to turn this on will make a large -+number of existing SGML DocBook instances invalid. -+ -+ -+* NAMELEN is too short -+ -+The NAMELEN quantity set in docbook.dcl is set to 45, rather than the -+default SP NAMELEN of 99999999. -+ -+A number of users have complained of problems due to this limitation -+(do a google search on 'docbook namelen' to see what I mean) in any -+cases (such as the SUSE Linux distribution) where the declaration is -+enforced. -+ -+Quoting <URL:http://xml.coverpages.org/wlw14.html>: -+ -+ Care should be used when changing these since creating a variant -+ syntax may make it difficult for some SGML systems to process -+ documents created with that syntax. The best means of guaranteeing -+ portability between different SGML systems and applications is to -+ use the reference concrete syntax as much as possible. -+ -+One wonders why we need to diverge from the reference concrete syntax -+here. -+ -+ -+* Document Character set it too restrictive -+ -+As an example, to workaround limitations in the support of KOI-R SDATA -+entities in Jade and OpenJade, KOI-R users have to use unicode -+entities. With the docbook.dcl file, these entities are disallowed, -+although they are perfectly valid with the implied SP declaration. -+Example of being disallowed: -+ -+ jade:/usr/share/sgml/entities/sgml-iso-entities-8879.1986/ISOcyr1.ent:1:16:E: \ -+ "1072" is not a character number in the document character set -+ -+ -+* SUBDOC is turned off -+ -+Why is it necessary to disallow SUBDOC in DocBook SGML documents? -+Seems like some authors may wish to use this, even if its not fully -+supported by existing stylesheets. -+ -+ -+ -+I hope I got my facts correct, and that this commentary is useful. -+ -+-- -+.....Adam Di Carlo....adam@onshore.com.....<URL:http://www.onshored.com/> -+ ---- docbook-4.5.orig/debian/README.Debian -+++ docbook-4.5/debian/README.Debian -@@ -0,0 +1,35 @@ -+ DocBook DTDs for Debian GNU/Linux -+ --------------------------------- -+ -+DocBook is an SGML DTD for software documentation. It is very -+thorough, and is used by many different organization to produce books, -+articles, references, and even manual pages. -+ -+The home page for DocBook is <URL:http://www.oasis-open.org/docbook/>. -+ -+A wonderful introduction and reference is available in the -+docbook-defguide package, which can also be read online at -+<URL:http://www.docbook.org/tdg/>. -+ -+To format DocBook documents, you'll need a style-sheet package, either -+docbook-dsssl or docbook-xsl, depending on what styling language you -+would like to use. -+ -+There are far too many other packages to describe here, both for -+authors, editors, stylers, or information architects. A list of such -+packages may be perused, for instance, using 'apt-cache search -+docbook'. -+ -+If you have a question about how to work with DocBook, there are many -+mailing lists available; see <URL:http://www.docbook.org/>. -+ -+If you have suggestions or questions regarding debian-specific issues, -+please consult the debian-sgml@lists.debian.org mailing list, -+<URL:http://lists.debian.org/>. -+ -+-- -+.....Adam Di Carlo....adam@onshore.com.....<URL:http://www.onshored.com/> -+(previously, Mark Eichin <eichin@thok.org>, Mon, 30 Jun 1997 14:11:38 -0400) -+ -+ -+ ---- docbook-4.5.orig/catalog -+++ docbook-4.5/catalog -@@ -0,0 +1,19 @@ -+ -- ...................................................................... -- -+ -- Prefer PUBID to SYSID ................................................ -- -+OVERRIDE YES -+ -+ -- latest DocBook -- -+PUBLIC "-//OASIS//DTD DocBook//EN" "4.5/docbook.dtd" -+ -- disabled, see README.docbook.dcl -- -+-- DTDDECL "-//OASIS//DTD DocBook//EN" "4.5/docbook.dcl" -- -+ -+ -- latest DocBook v4-- -+PUBLIC "-//OASIS//DTD DocBook V4//EN" "4.5/docbook.dtd" -+ -- disabled, see README.docbook.dcl -- -+-- DTDDECL "-//OASIS//DTD DocBook V4//EN" "4.5/docbook.dcl" -- -+ -+ -- latest DocBook v3-- -+PUBLIC "-//OASIS//DTD DocBook V3//EN" "3.1/docbook.dtd" -+ -- disabled, see README.docbook.dcl -- -+-- DTDDECL "-//OASIS//DTD DocBook V3//EN" "3.1/docbook.dcl" -- -+ diff --git a/source/ap/linuxdoc-tools/sources/gtkdoc-1.13-fixref.patch b/source/ap/linuxdoc-tools/sources/gtkdoc-1.13-fixref.patch new file mode 100644 index 000000000..89b062dee --- /dev/null +++ b/source/ap/linuxdoc-tools/sources/gtkdoc-1.13-fixref.patch @@ -0,0 +1,69 @@ +diff -up gtk-doc-1.13/gtkdoc-fixxref.in.fix-fixxref gtk-doc-1.13/gtkdoc-fixxref.in +--- gtk-doc-1.13/gtkdoc-fixxref.in.fix-fixxref 2009-12-17 14:36:51.000000000 -0500 ++++ gtk-doc-1.13/gtkdoc-fixxref.in 2010-01-06 17:56:55.457121567 -0500 +@@ -168,36 +168,38 @@ foreach my $dir (@EXTRA_DIRS) { + } + } + +-open (INPUT, "$MODULE-sections.txt") +- || die "Can't open $MODULE-sections.txt: $!"; +-my $subsection = ""; +-while (<INPUT>) { +- if (m/^#/) { +- next; +- +- } elsif (m/^<SECTION>/) { +- $subsection = ""; +- } elsif (m/^<SUBSECTION\s*(.*)>/i) { +- $subsection = $1; +- } elsif (m/^<SUBSECTION>/) { +- next; +- } elsif (m/^<TITLE>(.*)<\/TITLE>/) { +- next; +- } elsif (m/^<FILE>(.*)<\/FILE>/) { +- next; +- } elsif (m/^<INCLUDE>(.*)<\/INCLUDE>/) { +- next; +- } elsif (m/^<\/SECTION>/) { +- next; +- } elsif (m/^(\S+)/) { +- my $symbol=CreateValidSGMLID($1); +- +- if ($subsection eq "Standard" || $subsection eq "Private") { +- $NoLinks{$symbol} = 1; ++if (defined($MODULE)) { ++ open (INPUT, "$MODULE-sections.txt") ++ || die "Can't open $MODULE-sections.txt: $!"; ++ my $subsection = ""; ++ while (<INPUT>) { ++ if (m/^#/) { ++ next; ++ ++ } elsif (m/^<SECTION>/) { ++ $subsection = ""; ++ } elsif (m/^<SUBSECTION\s*(.*)>/i) { ++ $subsection = $1; ++ } elsif (m/^<SUBSECTION>/) { ++ next; ++ } elsif (m/^<TITLE>(.*)<\/TITLE>/) { ++ next; ++ } elsif (m/^<FILE>(.*)<\/FILE>/) { ++ next; ++ } elsif (m/^<INCLUDE>(.*)<\/INCLUDE>/) { ++ next; ++ } elsif (m/^<\/SECTION>/) { ++ next; ++ } elsif (m/^(\S+)/) { ++ my $symbol=CreateValidSGMLID($1); ++ ++ if ($subsection eq "Standard" || $subsection eq "Private") { ++ $NoLinks{$symbol} = 1; ++ } + } + } ++ close (INPUT); + } +-close (INPUT); + + &FixCrossReferences ($MODULE_DIR); + diff --git a/source/ap/linuxdoc-tools/sources/linuxdoc-tools.lib64.diff b/source/ap/linuxdoc-tools/sources/linuxdoc-tools.lib64.diff deleted file mode 100644 index 4741f2e2c..000000000 --- a/source/ap/linuxdoc-tools/sources/linuxdoc-tools.lib64.diff +++ /dev/null @@ -1,10 +0,0 @@ ---- linuxdoc-tools-0.9.20/bin/linuxdoc.in.orig 2002-09-10 14:31:56.000000000 -0400 -+++ linuxdoc-tools-0.9.20/bin/linuxdoc.in 2002-09-10 14:32:32.000000000 -0400 -@@ -23,6 +23,7 @@ - - use lib "@DATADIR@"; - use lib "@prefix@/perl5"; -+use lib "@prefix@/lib64/perl5"; - use lib "@prefix@/lib/perl5"; - use lib "@prefix@/share/perl5"; - diff --git a/source/ap/linuxdoc-tools/sources/source.download b/source/ap/linuxdoc-tools/sources/source.download index 479033e0d..410009021 100755 --- a/source/ap/linuxdoc-tools/sources/source.download +++ b/source/ap/linuxdoc-tools/sources/source.download @@ -2,55 +2,73 @@ # they contain patches required to either fix build or runtime problems, # and it's easier to maintain this hunk of a package when the patches & # sources are self contained. +# +# Some sources have been recompressed with LZMA for better compression results. # linuxdoc-tools: # This provides things such as sgml2txt. -wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/linuxdoc-tools-0.9.65-1.fc12.src.rpm +wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/linuxdoc-tools-0.9.66-4.fc13.src.rpm + # OpenSP: # http://openjade.sourceforge.net/download.html # wget -c http://kent.dl.sourceforge.net/sourceforge/openjade/OpenSP-1.5.2.tar.gz # -wget -c http://download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/opensp-1.5.2-11.fc11.src.rpm +wget -c http://download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/opensp-1.5.2-12.fc12.src.rpm + # OpenJade: # http://openjade.sourceforge.net/ wget -c http://downloads.sourceforge.net/openjade/openjade-1.3.3-pre1.tar.gz + # sgmltools-common. # It's broken and needs patching so we'll use Fedora's. #wget -c ftp://sources.redhat.com/pub/docbook-tools/new-trials/SOURCES/sgml-common-0.6.3.tgz -wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/sgml-common-0.6.3-29.fc12.src.rpm +wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/sgml-common-0.6.3-31.fc13.src.rpm + # DocBook docs: # http://www.oasis-open.org/docbook/sgml/ # #wget -c http://www.oasis-open.org/docbook/sgml/3.1/docbk31.zip #wget -c http://www.docbook.org/sgml/4.5/docbook-4.5.zip -# We use Debian's source instead because they patch the docbooks which make them work! +# We use Debian's source because it's more convenient since they package all versions in one archive: wget -c http://ftp.de.debian.org/debian/pool/main/d/docbook/docbook_4.5.orig.tar.gz -wget -c http://ftp.de.debian.org/debian/pool/main/d/docbook/docbook_4.5-4.diff.gz + # http://www.linuxfromscratch.org/blfs/view/stable/pst/docbook-dsssl.html -# -wget -c ftp://ftp.fu-berlin.de/unix/linux/mirrors/gentoo/distfiles/docbook-dsssl-1.79.tar.bz2 +# Check versions: +# http://sourceforge.net/projects/docbook/files/ +wget -c ftp://ftp.linux.ee/pub/gentoo/distfiles/distfiles/docbook-dsssl-1.79.tar.bz2 wget -c http://switch.dl.sourceforge.net/sourceforge/docbook/docbook-dsssl-doc-1.79.tar.bz2 # Why don't they put the patches into the distributed source...??? #wget -c ftp://sources.redhat.com/pub/docbook-tools/new-trials/SOURCES/docbook-utils-0.6.14.tar.gz -wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/docbook-utils-0.6.14-17.fc12.src.rpm +wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/docbook-utils-0.6.14-23.fc13.src.rpm + # wget -c http://www.docbook.org/xml/4.5/docbook-xml-4.5.zip # https://sourceforge.net/project/showfiles.php?group_id=21935&package_id=16608 -#wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/docbook-style-xsl-1.75.1-1.fc12.src.rpm -wget -c http://downloads.sourceforge.net/docbook/docbook-xsl-1.71.1.tar.bz2 -wget -c http://downloads.sourceforge.net/docbook/docbook-xsl-doc-1.71.1.tar.bz2 +wget -c ftp://ftp.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora/linux/development/source/SRPMS/docbook-style-xsl-1.75.2-5.fc13.src.rpm + + +# We use the Fedora "docbook-style-xsl" SRPM for this rather than the original source which is why +# these "docbook-xsl*" files aren't in our sources directory. +#wget -c "http://downloads.sourceforge.net/project/docbook/docbook-xsl/1.75.2/docbook-xsl-1.75.2.tar.bz2?use_mirror=freefr" +##wget -c "http://downloads.sourceforge.net/project/docbook/docbook-xsl-doc/1.75.2/docbook-xsl-doc-1.75.2.tar.bz2?use_mirror=freefr" + # gnome-doc-utils, needed to build gtk-doc: -wget -c http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/0.17/gnome-doc-utils-0.17.2.tar.bz2 +wget -c http://ftp.acc.umu.se/pub/GNOME/sources/gnome-doc-utils/0.19/gnome-doc-utils-0.19.1.tar.bz2 + # gtk-doc: -wget -c http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/1.11/gtk-doc-1.11.tar.bz2 +# When upgrading this, it's worth checking the Fedora SRPM. For version 1.13 +# we're carrying a fix for gtk-doc-fixref. Make sure newer versions don't need +# any patches! +wget -c http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/1.13/gtk-doc-1.13.tar.bz2 + # sgmlspl # http://www.cs.indiana.edu/~asengupt/sgml/SGMLSpm/DOC/HTML/sgmlspl/sgmlspl.html @@ -58,10 +76,12 @@ wget -c http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/1.11/gtk-doc-1.11.tar.bz2 wget -c http://ftp.debian.org/debian/pool/main/libs/libsgmls-perl/libsgmls-perl_1.03ii.orig.tar.gz wget -c http://ftp.de.debian.org/debian/pool/main/libs/libsgmls-perl/libsgmls-perl_1.03ii-32.diff.gz + # xmlto # https://fedorahosted.org/releases/x/m/xmlto -wget -c --no-check-certificate http://fedorahosted.org/releases/x/m/xmlto/xmlto-0.0.22.tar.bz2 +wget -c --no-check-certificate https://fedorahosted.org/releases/x/m/xmlto/xmlto-0.0.23.tar.bz2 + # AsciiDoc # http://www.methods.co.nz/asciidoc/ -wget -c http://downloads.sourceforge.net/sourceforge/asciidoc/asciidoc-8.4.5.tar.gz +wget -c "http://downloads.sourceforge.net/project/asciidoc/asciidoc/8.5.2/asciidoc-8.5.2.tar.gz?use_mirror=ignum" diff --git a/source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools b/source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools index 6eddaf4e2..9533bd861 100755 --- a/source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools +++ b/source/ap/linuxdoc-tools/trackbuild.linuxdoc-tools @@ -20,17 +20,18 @@ # Package info: PKGNAM=linuxdoc-tools -# Automatically determine architecture for build & packaging: +# Automatically determine the architecture we're building on: if [ -z "$ARCH" ]; then case "$( uname -m )" in i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$( uname -m ) ;; + *) export ARCH=$( uname -m ) ;; esac fi -BUILD=${BUILD:-5} -PKGVERSION=0.9.56 # use the version of linuxdoc-tools as the package version. +export PKGVERSION=0.9.66 # use the version of linuxdoc-tools as the package version. +BUILD=${BUILD:-2} PKGEXT=${PKGEXT:-txz} export CWD=$PWD @@ -49,6 +50,7 @@ rm -rf /usr/share/doc/linuxdoc-tools rm -rf /usr/share/sgml rm -rf /usr/share/xml/{docbook,xml-iso-entities*} # can't wipe the entire dir because of libglade rm -rf ~/.texmf-var/ # created by docbook-utils +rm -rf ~/.texlive* # incase you were using Texlive rather than Textex-3 #################################################################### @@ -75,4 +77,7 @@ slacktrack $TFS \ -l $CWD/build.$ARCH.log \ -R $CWD/postbuildfixes.sh \ -b $PKGSTORE \ - -YQOcp $PKGNAM-$PKGVERSION-$ARCH-$BUILD.$PKGEXT ./linuxdoc-tools.build + -rYQOcp $PKGNAM-$PKGVERSION-$ARCH-$BUILD.$PKGEXT ./linuxdoc-tools.build + +# Compress build log: +xz -fvz $CWD/build.$ARCH.log diff --git a/source/ap/lm_sensors/lm_sensors.SlackBuild b/source/ap/lm_sensors/lm_sensors.SlackBuild index 72ad373de..83785a566 100755 --- a/source/ap/lm_sensors/lm_sensors.SlackBuild +++ b/source/ap/lm_sensors/lm_sensors.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,18 @@ PKGNAM=lm_sensors -VERSION=${VERSION:-3.1.1} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-3.1.2} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" @@ -34,6 +41,8 @@ else LIBDIRSUFFIX="" fi +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} diff --git a/source/ap/lsof/lsof.SlackBuild b/source/ap/lsof/lsof.SlackBuild index afcef1678..6a141cc34 100755 --- a/source/ap/lsof/lsof.SlackBuild +++ b/source/ap/lsof/lsof.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.78 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo lsof_*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d _ | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-lsof @@ -34,10 +43,10 @@ mkdir -p $TMP $PKG cd $TMP rm -rf lsof_$VERSION -tar xjvf $CWD/lsof_$VERSION.tar.bz2 -cd lsof_$VERSION -tar xvf lsof_${VERSION}_src.tar -cd lsof_${VERSION}_src +tar xjvf $CWD/lsof_$VERSION.tar.bz2 || exit 1 +cd lsof_$VERSION || exit 1 +tar xvf lsof_${VERSION}_src.tar || exit 1 +cd lsof_${VERSION}_src || exit 1 chown -R root:root . find . \ @@ -69,8 +78,3 @@ cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG makepkg -l y -c n $TMP/lsof-$VERSION-$ARCH-$BUILD.txz -# Clean up the extra stuff: -if [ "$1" = "--cleanup" ]; then - rm -rf $TMP/lsof-$VERSION - rm -rf $PKG -fi diff --git a/source/ap/man-pages/man-pages.SlackBuild b/source/ap/man-pages/man-pages.SlackBuild index 26b7bb57a..8930798bf 100755 --- a/source/ap/man-pages/man-pages.SlackBuild +++ b/source/ap/man-pages/man-pages.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,9 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-3.22} +VERSION=${VERSION:-$(echo man-pages-3.*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} ARCH=noarch -BUILD=${BUILD:-2} +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -33,9 +33,10 @@ mkdir -p $TMP $PKG cd $TMP rm -rf man-pages-$VERSION -tar xvf $CWD/man-pages-$VERSION.tar.bz2 +tar xf $CWD/man-pages-$VERSION.tar.bz2 tar xf $CWD/man-pages-posix-2003-a.tar.bz2 chown -R root:root man-pages-$VERSION man-pages-posix-2003-a +chmod -R a-s,u+rw,go+r-w man-pages-$VERSION man-pages-posix-2003-a find man-pages-$VERSION \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ -exec chmod 755 {} \; -o \ diff --git a/source/ap/mc/mc.SlackBuild b/source/ap/mc/mc.SlackBuild index 8beae8b41..d4f00205d 100755 --- a/source/ap/mc/mc.SlackBuild +++ b/source/ap/mc/mc.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=20090714_git -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo mc-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -33,6 +42,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -52,7 +63,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -./autogen.sh +if [ ! -x ./configure ]; then + ./autogen.sh +fi CFLAGS="$SLKCFLAGS" \ ./configure \ diff --git a/source/ap/mpg123/mpg123.SlackBuild b/source/ap/mpg123/mpg123.SlackBuild new file mode 100755 index 000000000..5ac3b53a6 --- /dev/null +++ b/source/ap/mpg123/mpg123.SlackBuild @@ -0,0 +1,157 @@ +#!/bin/sh +# Copyright 2006-2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=mpg123 +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" + TARGET="x86" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + TARGET="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" + TARGET="x86-64" +elif [ "$ARCH" = "arm" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + TARGET="arm_nofpu" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + TARGET="" +fi + +# configure --help shows the following re TARGET: +# --with-cpu=i386_fpu Use code optimized for i386 processors with floating point arithmetic +# --with-cpu=i386_nofpu Use code optimized for i386 processors with fixed point arithmetic (experimental) +# --with-cpu=i486 Use code optimized for i486 processors (only usable alone!) +# --with-cpu=i586 Use code optimized for i586 processors +# --with-cpu=i586_dither Use code optimized for i586 processors with dithering (noise shaping), adds 256K to binary size +# --with-cpu=3dnow Use code optimized for 3DNow processors +# --with-cpu=3dnowext Use code optimized for 3DNowExt processors (K6-3+, Athlon) +# --with-cpu=3dnowext_alone Really only 3DNowExt decoder, without 3DNow fallback for flexible rate +# --with-cpu=mmx Use code optimized for MMX processors +# --with-cpu=mmx_alone Really only MMX decoder, without i586 fallback for flexible rate +# --with-cpu=sse Use code optimized for SSE processors +# --with-cpu=sse_alone Really only SSE decoder, without i586 fallback for flexible rate +# --with-cpu=x86 Pack all x86 opts into one binary (excluding i486, including dither) +# --with-cpu=x86-64 Use code optimized for x86-64 processors (AMD64 and Intel64, including dithered generic) +# --with-cpu=arm_nofpu Use code optimized for ARM processors with fixed point arithmetic (experimental) + +rm -rf $PKG +mkdir -p $PKG $TMP +cd $TMP +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --docdir=/usr/doc/${PKGNAM}-$VERSION \ + --with-cpu=$TARGET \ + --with-audio=alsa,oss \ + --with-default-audio=alsa \ + --with-optimization=2 \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Add compat symlinks for mpg321: +( cd $PKG/usr/bin ; ln -s mpg123 mpg321 ) +( cd $PKG/usr/man/man1 ; ln -sf mpg123.1 mpg321.1 ) + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +# Compress info files, if any: +if [ -d $PKG/usr/info ]; then + ( cd $PKG/usr/info + rm -f dir + gzip -9 * + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a \ + AUTHORS COPYING INSTALL NEWS* README TODO doc \ + $PKG/usr/doc/${PKGNAM}-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/extra/source/mpg123/slack-desc b/source/ap/mpg123/slack-desc index cabaa7f17..00bd3478e 100644 --- a/extra/source/mpg123/slack-desc +++ b/source/ap/mpg123/slack-desc @@ -8,12 +8,12 @@ |-----handy-ruler------------------------------------------------------| mpg123: mpg123 (a command-line mp3 player) mpg123: -mpg123: (full?) MPEG 1.0/2.0, Layer 1,2 and 3 support (Layer-3 realtime only -mpg123: with a 'fast' machine). Since April 97, 128kbit j-stereo should work -mpg123: on a 486DX4-120. With 2:1 down-sampling or using the downmix-mode -mpg123: even a 486DX2-66 should play such a stream in realtime! +mpg123: mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for +mpg123: layers 1, 2, and 3 (MPEG 1.0 layer 3 aka MP3 most commonly tested). +mpg123: +mpg123: It is free software licensed under LGPL 2.1. +mpg123: +mpg123: Homepage: http://mpg123.org/ mpg123: -mpg123: The mpg123 project was started by Michel Hipp and is now being -mpg123: maintained by Thomas Orgis and Nicholas J. Humfrey. mpg123: mpg123: diff --git a/source/ap/mpg321/slack-desc b/source/ap/mpg321/slack-desc deleted file mode 100644 index 81b435b58..000000000 --- a/source/ap/mpg321/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -mpg321: mpg321 (a command-line mp3 player) -mpg321: -mpg321: mpg321 is a free command-line mp3 player, which uses the mad audio -mpg321: decoding library. mpg321 is written to be a drop-in replacement for -mpg321: the mpg123 player for front-ends such as gqmpeg and programs which use -mpg321: mpg123 to decode mp3 files (like gtoaster, and other CD-recording -mpg321: software). -mpg321: -mpg321: mpg321 requires libao.so from the oggutils package. -mpg321: -mpg321: diff --git a/source/ap/mysql/mirror-url b/source/ap/mysql/mirror-url deleted file mode 100644 index 37be0283c..000000000 --- a/source/ap/mysql/mirror-url +++ /dev/null @@ -1 +0,0 @@ -http://mysql.he.net/Downloads/MySQL-5.0/mysql-5.0.82.tar.gz diff --git a/source/ap/mysql/mysql-embedded.build b/source/ap/mysql/mysql-embedded.build index 9b06d386b..2ac77f314 100755 --- a/source/ap/mysql/mysql-embedded.build +++ b/source/ap/mysql/mysql-embedded.build @@ -3,10 +3,19 @@ # by: David Cantrell <david@slackware.com> # Currently maintained by: Patrick Volkerding <volkerdi@slackware.com> -VERSION=5.0.84 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo mysql-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-mysql @@ -20,6 +29,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -29,15 +41,21 @@ rm -rf mysql-$VERSION tar xvf $CWD/mysql-$VERSION.tar.?z* || exit 1 cd mysql-$VERSION +if ls $CWD/*.diff.gz 1> /dev/null 2> /dev/null ; then + for patch in $CWD/*.diff.gz ; do + zcat $patch | patch -p1 --verbose || exit 1 + done +fi + CFLAGS="$SLKCFLAGS -fPIC" CXXFLAGS="$SLKCFLAGS -fPIC" \ ./configure --prefix=/usr --libdir=/usr/lib${LIBDIRSUFFIX} \ --datadir=/usr/share --sysconfdir=/etc/mysql \ --libexecdir=/usr/sbin --localstatedir=/var/lib/mysql \ --without-docs --without-man --without-server \ - --with-embedded-server --without-innodb --without-bench \ + --with-embedded-server --without-innodb \ --without-berkeley-db --without-row-based-replication \ --without-readline --disable-shared --with-charset=utf8 \ - --without-debug --with-pthread --without-openssl --without-query-cache \ + --without-debug --with-pthread --without-ssl --without-query-cache \ --without-geometry --with-pic make -j6 || make || exit 1 diff --git a/source/ap/mysql/mysql.SlackBuild b/source/ap/mysql/mysql.SlackBuild index 16ba3efa8..cf846ffe1 100755 --- a/source/ap/mysql/mysql.SlackBuild +++ b/source/ap/mysql/mysql.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,11 +25,20 @@ # Currently maintained by: Patrick Volkerding <volkerdi@slackware.com> -VERSION=5.0.84 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} +VERSION=${VERSION:-$(echo mysql-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-mysql @@ -43,6 +52,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -51,6 +63,13 @@ cd $TMP rm -rf mysql-$VERSION tar xvf $CWD/mysql-$VERSION.tar.?z* || exit 1 cd mysql-$VERSION + +if ls $CWD/*.diff.gz 1> /dev/null 2> /dev/null ; then + for patch in $CWD/*.diff.gz ; do + zcat $patch | patch -p1 --verbose || exit 1 + done +fi + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -70,13 +89,13 @@ CXX=gcc \ --mandir=/usr/man \ --infodir=/usr/info \ --enable-assembler \ - --with-raid \ --without-debug \ --enable-thread-safe-client \ - --without-bench \ --with-extra-charsets=complex \ - --with-vio \ - --with-openssl \ + --with-ssl=/usr \ + --enable-largefile \ + --with-innodb \ + --with-readline \ --build=$ARCH-slackware-linux # # --without-readline @@ -84,6 +103,22 @@ CXX=gcc \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG +# install additional headers needed for building external engine plugins +for i in sql include regex; do + for j in $i/*.h; do + install -m 644 $j $PKG/usr/include/mysql/ + done +done + +mkdir -p $PKG/usr/include/mysql/atomic +for i in include/atomic/*.h; do + install -m 644 $i $PKG/usr/include/mysql/atomic/ +done + +# The ./configure option to omit this has gone away, so we'll omit it +# the old-fashioned way. It's all in the source tarball if you need it. +rm -rf $PKG/usr/sql-bench + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -94,13 +129,15 @@ cp support-files/my-{huge,large,medium,small}.cnf $PKG/etc # Install docs mkdir -p $PKG/usr/doc/mysql-$VERSION/Docs cp -a \ - COPYING* MIRRORS README* \ + COPYING* EXCEPTIONS* INSTALL-SOURCE README* \ $PKG/usr/doc/mysql-$VERSION ( cd Docs + # Seems most of the Docs/* are gone, but we'll leave the cp stuff + # in case it returns. cp -a INSTALL-BINARY *.html *.txt Flags \ $PKG/usr/doc/mysql-$VERSION/Docs ) -# Too large to justify since the .html version is right there: -rm $PKG/usr/doc/mysql-$VERSION/Docs/manual.txt +## Too large to justify since the .html version is right there: +#rm $PKG/usr/doc/mysql-$VERSION/Docs/manual.txt find $PKG/usr/doc/mysql-$VERSION -type f -exec chmod 0644 {} \; # This is the directory where databases are stored @@ -127,20 +164,20 @@ zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc # Add some handy library symlinks: -if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/mysql/libmysqlclient.so.15 ]; then +if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/mysql/libmysqlclient.so.16 ]; then ( cd $PKG/usr/lib${LIBDIRSUFFIX} - rm -f libmysqlclient.so libmysqlclient.so.15 + rm -f libmysqlclient.so libmysqlclient.so.16 ln -sf mysql/libmysqlclient.so . - ln -sf mysql/libmysqlclient.so.15 . + ln -sf mysql/libmysqlclient.so.16 . ) else exit 1 fi -if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/mysql/libmysqlclient_r.so.15 ]; then +if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/mysql/libmysqlclient_r.so.16 ]; then ( cd $PKG/usr/lib${LIBDIRSUFFIX} - rm -f libmysqlclient_r.so libmysqlclient_r.so.15 + rm -f libmysqlclient_r.so libmysqlclient_r.so.16 ln -sf mysql/libmysqlclient_r.so . - ln -sf mysql/libmysqlclient_r.so.15 . + ln -sf mysql/libmysqlclient_r.so.16 . ) else exit 1 @@ -172,11 +209,15 @@ if [ -d $PKG/usr/info ]; then ) fi +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Build package: cd $PKG /sbin/makepkg -l y -c n $TMP/mysql-$VERSION-$ARCH-$BUILD.txz -if [ "$1" == "--cleanup" ]; then - cd $TMP - rm -rf mysql-$VERSION -fi diff --git a/source/ap/nano/nano.SlackBuild b/source/ap/nano/nano.SlackBuild index 7a1440e01..c6e3c3ade 100755 --- a/source/ap/nano/nano.SlackBuild +++ b/source/ap/nano/nano.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ PKGNAM=nano -VERSION=${VERSION:-2.0.9} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -34,6 +43,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -44,7 +55,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: @@ -109,6 +120,14 @@ cp -a \ doc/faq.html doc/nanorc.sample \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/ap/pm-utils/README.SLACKWARE b/source/ap/pm-utils/README.SLACKWARE index 071624395..26ff48d87 100644 --- a/source/ap/pm-utils/README.SLACKWARE +++ b/source/ap/pm-utils/README.SLACKWARE @@ -1,5 +1,5 @@ README.SLACKWARE -20090414 - rworkman@slackware.com +20100319 - rworkman@slackware.com =============================================================================== PLEASE READ THIS ENTIRE FILE BEFORE REPORTING PROBLEMS OR ASKING FOR HELP! @@ -29,21 +29,21 @@ it works at all. Here's the short version of using suspend to disk: Stanza in /etc/lilo.conf should look something like this: - image = /boot/vmlinuz-generic-smp-2.6.29.1-smp + image = /boot/vmlinuz-generic-smp-2.6.33.1-smp initrd = /boot/initrd.gz - append = "resume=/dev/hda2" - root = /dev/hda1 - label = Slackware + append = "resume=/dev/sda2" + root = /dev/sda1 + label = genericsmp.s read-only /etc/mkinitrd.conf should look something like this: MODULE_LIST="jfs" - ROOTDEV="/dev/hda1" + ROOTDEV="/dev/sda1" ROOTFS="jfs" - RESUMEDEV="/dev/hda2" + RESUMEDEV="/dev/sda2" mkinitrd command invocation would be this: - mkinitrd -c -k 2.6.29.1-smp -F + mkinitrd -c -k 2.6.33.1-smp -F All of the above assumes at least a cursory understanding of what those commands and parameters do. If it's not clear, don't attempt it on a @@ -51,14 +51,17 @@ system that you can't easily reinstall without concern. ============================================================================== -If it works for you, and/or you want to automate it a bit, you'll find -some sample acpi event declarations and scripts here: - http://rlworkman.net/conf/acpi/ -A better option is to use the power manager daemon included with your choice -of desktop environment (both kde and xfce have one). +Once you confirm that a suspend and resume cycle works as expected, you might +automate the process with some acpi magic, but a better option is to use the +power manager daemon included with your choice of desktop environment (both +kde and xfce have one). ============================================================================== +/* TODO: these links are now dead. That's mostly okay, because the vast + majority of the hardware out there these days doesn't require any quirks + at all any more. Hopefully you won't be in the minority :-) */ + If it doesn't work by default for you, consider having a look at http://people.freedesktop.org/~hughsient/quirk/quirk-suspend-index.html for some debugging hints. Pay particular attention to this page: @@ -76,14 +79,14 @@ needed to add for successful suspend/resume to rworkman@slackware.com If you need the system to do certain operations before going to sleep and then undo them (or perhaps do something new) when waking back up, pm-utils supports something called "hooks." The hooks installed by packages (not only -pm-utils itself) should be in /usr/lib/pm-utils/sleep.d/, while any hooks +pm-utils itself) should be in /usr/lib(64)/pm-utils/sleep.d/, while any hooks installed by the local system administrator (e.g. things that are only an issue on that one machine) should be in /etc/pm/sleep.d/. Looking at some of the existing hooks should give you a decent idea of their capabilities; as a head start, the functions used in the hooks are declared -in /usr/lib/pm-utils/functions, which is inherited elsewhere by -/usr/lib/pm-utils/pm-functions. Note that an error exit code on any hook +in /usr/lib(64)/pm-utils/functions, which is inherited elsewhere by +/usr/lib(64)/pm-utils/pm-functions. Note that an error exit code on any hook will cause the sleep operation to fail, so if you don't care whether your hook executes successfully, be sure to return an exit code of 0 (success) if you don't want the suspend operation to fail. Some other exit codes are @@ -101,15 +104,18 @@ ship its own hook. KNOWN ISSUES +/* TODO: remove? I've gotten *zero* mails about either of these since + we've been shipping pm-utils */ + **** If you encounter either of these, mail rworkman@slackware.com **** If your alsa drivers don't correctly save and restore state across a sleep / resume cycle (due to a buggy driver), then you will need to add the drivers to a custom file named /etc/pm/config.d/defaults (create the file if it does not exist already) in a variable named "SUSPEND_MODULES" - see the file at -/usr/lib/pm-utils/defaults for proper format. +/usr/lib(64)/pm-utils/defaults for proper format. -The /usr/lib/pm-utils/sleep.d/90clock does not run by default. It added +The /usr/lib(64)/pm-utils/sleep.d/90clock does not run by default. It added over a second to suspend, and the vast majority of hardware does not need it to keep the clocks in sync. If you need this hook, you can set the NEED_CLOCK_SYNC environment variable in a custom /etc/pm/config.d/defaults diff --git a/source/ap/pm-utils/pm-utils.SlackBuild b/source/ap/pm-utils/pm-utils.SlackBuild index 26e60714f..0b9eacd11 100755 --- a/source/ap/pm-utils/pm-utils.SlackBuild +++ b/source/ap/pm-utils/pm-utils.SlackBuild @@ -2,8 +2,8 @@ # Slackware build script for pm-utils -# Copyright 2008, 2009 Robby Workman, Northport, Alabama, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Robby Workman, Northport, Alabama, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,16 +23,27 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=pm-utils -VERSION=1.2.5 -ARCH=${ARCH:-x86_64} +PKGNAM=pm-utils +VERSION=$(echo ${PKGNAM}-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev) BUILD=${BUILD:-1} +QUIRKS=20100316 # Version of the quirks database + NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -43,14 +54,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -63,19 +77,21 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --mandir=/usr/man \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ - xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ - xargs strip --strip-unneeded 2> /dev/null -) +# Now let's add the video quirks +PM_UTILS_LIBDIR="/usr/lib${LIBDIRSUFFIX}/pm-utils" +mkdir -p $PKG/$PM_UTILS_LIBDIR/video-quirks +tar xf $CWD/pm-quirks-$QUIRKS.tar.xz -C $PKG/$PM_UTILS_LIBDIR/video-quirks +chown -R root:root $PKG/$PM_UTILS_LIBDIR/video-quirks + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null if [ -d $PKG/usr/man ]; then ( cd $PKG/usr/man @@ -91,15 +107,22 @@ if [ -d $PKG/usr/man ]; then ) fi -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING INSTALL NEWS README* TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION -cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE + $PKG/usr/doc/$PKGNAM-$VERSION +cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PKGNAM-$VERSION/README.SLACKWARE + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz - +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/ap/powertop/powertop.SlackBuild b/source/ap/powertop/powertop.SlackBuild new file mode 100755 index 000000000..7767580be --- /dev/null +++ b/source/ap/powertop/powertop.SlackBuild @@ -0,0 +1,101 @@ +#!/bin/sh + +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=powertop +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} +rm -rf $PKG +mkdir -p $TMP $PKG + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +cd $TMP +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Build and install: +make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Move man pages: +mv $PKG/usr/share/man $PKG/usr + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a \ + COPYING* README* \ + $PKG/usr/doc/${PKGNAM}-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/ap/powertop/slack-desc b/source/ap/powertop/slack-desc new file mode 100644 index 000000000..3bf3aa5da --- /dev/null +++ b/source/ap/powertop/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +powertop: powertop (tool for analyzing system power usage) +powertop: +powertop: PowerTOP is a utility that collects data from your system and presents +powertop: an overview to help optimize power savings. PowerTOP will identify +powertop: which tunables and software components are the biggest offenders in +powertop: slurping up your battery time. PowerTOP updates its display +powertop: frequently so that you can directly see the impact of any changes you +powertop: are making. +powertop: +powertop: Homepage: http://www.linuxpowertop.org +powertop: diff --git a/source/ap/radeontool/radeontool.SlackBuild b/source/ap/radeontool/radeontool.SlackBuild index 3292a21c7..2a5a3fe4d 100755 --- a/source/ap/radeontool/radeontool.SlackBuild +++ b/source/ap/radeontool/radeontool.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008 Robby Workman, Northport, Alabama, USA +# Copyright 2008, 2010 Robby Workman, Northport, Alabama, USA # Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # @@ -22,10 +22,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.5 -ARCH=${ARCH:-x86_64} +VERSION=1.6.1 BUILD=${BUILD:-1} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-radeontool @@ -36,13 +44,15 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf radeontool-$VERSION -tar xvf $CWD/radeontool-$VERSION.tar.gz +tar xvf $CWD/radeontool-$VERSION.tar.bz2 cd radeontool-$VERSION || exit 1 chown -R root:root . find . \ @@ -51,16 +61,25 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Fix a bad include -zcat $CWD/radeontool.c.diff.gz | patch -p1 || exit 1 +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --build=$ARCH-slackware-linux + +make +make install DESTDIR=$PKG -gcc -Wall $SLKCFLAGS -o radeontool radeontool.c -strip --strip-unneeded radeontool -mkdir -p $PKG/usr/sbin -cp -a radeontool $PKG/usr/sbin +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# Sometimes CHANGES is present, sometimes it isn't. +# We don't care about noise on stderr. Better than missing docs. +# So, first we try to copy it: mkdir -p $PKG/usr/doc/radeontool-$VERSION cp -a CHANGES $PKG/usr/doc/radeontool-$VERSION +# Then we take care of any empty directory in case there was no CHANGES file: +rmdir $PKG/usr/doc/radeontool-$VERSION +rmdir $PKG/usr/doc mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/ap/radeontool/radeontool.c.diff b/source/ap/radeontool/radeontool.c.diff deleted file mode 100644 index 156863ed5..000000000 --- a/source/ap/radeontool/radeontool.c.diff +++ /dev/null @@ -1,12 +0,0 @@ -diff -u radeontool-1.5.orig/radeontool.c radeontool-1.5/radeontool.c ---- radeontool-1.5.orig/radeontool.c 2004-02-10 21:50:27.000000000 -0600 -+++ radeontool-1.5/radeontool.c 2008-11-24 13:21:32.895434558 -0600 -@@ -21,7 +21,7 @@ - #include <sys/stat.h> - #include <fcntl.h> - #include <sys/mman.h> --#include <asm/page.h> -+#include <sys/user.h> - - #include "radeon_reg.h" - diff --git a/source/ap/radeontool/radeontool.info b/source/ap/radeontool/radeontool.info deleted file mode 100644 index 7c7c1c6c4..000000000 --- a/source/ap/radeontool/radeontool.info +++ /dev/null @@ -1,8 +0,0 @@ -PRGNAM="radeontool" -VERSION="1.5" -HOMEPAGE="http://fdd.com/software/radeon/" -DOWNLOAD="http://fdd.com/software/radeon/radeontool-1.5.tar.gz" -MD5SUM="8065eebe5a2b163e43b40461bfe49a56" -MAINTAINER="Robby Workman" -EMAIL="rw@rlworkman.net" -APPROVED="" diff --git a/source/ap/rpm/rpm.SlackBuild b/source/ap/rpm/rpm.SlackBuild index a16f0a3ea..68ab36a4e 100755 --- a/source/ap/rpm/rpm.SlackBuild +++ b/source/ap/rpm/rpm.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,21 @@ # Build RPM (of all things) for Slackware. -VERSION=${VERSION:-4.7.0} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-4.8.0} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" diff --git a/source/ap/sox/sox.SlackBuild b/source/ap/sox/sox.SlackBuild index aea5d7c16..fdbb4e553 100755 --- a/source/ap/sox/sox.SlackBuild +++ b/source/ap/sox/sox.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,17 @@ VERSION=14.3.0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -90,6 +102,14 @@ cp -a \ AUTHORS COPYING INSTALL NEWS README \ $PKG/usr/doc/sox-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/ap/sqlite/sqlite.SlackBuild b/source/ap/sqlite/sqlite.SlackBuild index ffc75b330..c2754bc26 100755 --- a/source/ap/sqlite/sqlite.SlackBuild +++ b/source/ap/sqlite/sqlite.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for sqlite # Copyright 2006 Martin Lefebvre <dadexter@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,12 +23,26 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=sqlite -VERSION=3.6.14.2 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=sqlite +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -38,18 +52,17 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM - rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root.root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -94,18 +107,18 @@ gzip -9 $PKG/usr/man/man1/sqlite3.1 sed -i 's|Libs: -L${libdir} -lsqlite3|Libs: -L${libdir} -lsqlite3 -ldl|g' \ $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/sqlite3.pc -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ README* VERSION \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION # Add a COPYRIGHT file -- http://www.sqlite.org/copyright.html -zcat $CWD/COPYRIGHT.gz > $PKG/usr/doc/$PRGNAM-$VERSION/COPYRIGHT -rm -rf $PKG/usr/doc/$PRGNAM-$VERSION/CVS +zcat $CWD/COPYRIGHT.gz > $PKG/usr/doc/$PKGNAM-$VERSION/COPYRIGHT +rm -rf $PKG/usr/doc/$PKGNAM-$VERSION/CVS find $PKG/usr/doc -type f -exec chmod 0644 {} \; mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/ap/sudo/sudo.SlackBuild b/source/ap/sudo/sudo.SlackBuild index c170e868d..4d6b898e2 100755 --- a/source/ap/sudo/sudo.SlackBuild +++ b/source/ap/sudo/sudo.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.6.8p12 -ARCH=${ARCH:-x86_64} +PKGNAM=sudo +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) @@ -34,7 +44,9 @@ PKG=$TMP/package-sudo rm -rf $PKG mkdir -p $TMP $PKG -if [ "$ARCH" = "i486" ]; then +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mcpu=i686" +elif [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" @@ -54,11 +66,24 @@ find . \ -exec chmod 644 {} \; CFLAGS="$SLKCFLAGS" \ -./configure --prefix=/usr --sbindir=/usr/sbin --with-getpass --with-C2 +./configure \ + --prefix=/usr \ + --sbindir=/usr/sbin \ + --mandir=/usr/man \ + --with-getpass \ + --with-C2 \ + --with-env-editor \ + --disable-pam-session \ + --with-pam=no \ + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +# Create the timestamp directory +mkdir -p $PKG/var/run/sudo +chmod 700 $PKG/var/run/sudo + ( cd $PKG/usr/bin chmod 4711 sudo ln -sf sudo sudoedit @@ -77,10 +102,18 @@ mv $PKG/etc/sudoers $PKG/etc/sudoers.new mkdir -p $PKG/usr/doc/sudo-$VERSION cp -a \ BUGS HISTORY INSTALL LICENSE PORTING README* \ - RUNSON TODO TROUBLESHOOTING UPGRADE \ + RUNSON TODO TROUBLESHOOTING UPGRADE WHATSNEW \ $PKG/usr/doc/sudo-$VERSION chmod 644 $PKG/usr/doc/sudo-$VERSION/* +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/ap/sysstat/doinst.sh b/source/ap/sysstat/doinst.sh new file mode 100644 index 000000000..b0f71a916 --- /dev/null +++ b/source/ap/sysstat/doinst.sh @@ -0,0 +1,34 @@ + +# Since /etc/sysstat/sysstat used to be the init script and now it is +# a config file, if we find an init script here, we have to move it +# out of the way: +if grep -wq "sadc was successfully launched" etc/sysstat/sysstat 1> /dev/null 2> /dev/null ; then + mv etc/sysstat/sysstat etc/sysstat/sysstat.obsolete.use.etc.rc.d.rc.sysstat +fi + +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/sysstat/sysstat.new + +# Keep same perms on rc.sysstat.new: +if [ -e etc/rc.d/rc.sysstat ]; then + cp -a etc/rc.d/rc.sysstat etc/rc.d/rc.sysstat.new.incoming + cat etc/rc.d/rc.sysstat.new > etc/rc.d/rc.sysstat.new.incoming + mv etc/rc.d/rc.sysstat.new.incoming etc/rc.d/rc.sysstat.new +fi + +# There's no reason for a user to edit rc.sysstat, so overwrite it: +if [ -r etc/rc.d/rc.sysstat.new ]; then + mv etc/rc.d/rc.sysstat.new etc/rc.d/rc.sysstat +fi + diff --git a/source/ap/sysstat/slack-desc b/source/ap/sysstat/slack-desc index e36d25ff9..059836bf6 100644 --- a/source/ap/sysstat/slack-desc +++ b/source/ap/sysstat/slack-desc @@ -6,14 +6,14 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -sysstat: sysstat (system performance monitoring tools) +sysstat: sysstat (System performance monitoring tools) sysstat: sysstat: The sysstat utilities are a collection of performance monitoring -sysstat: tools for Linux. These include sar, sadf, mpstat, iostat and sa -sysstat: tools. +sysstat: tools for Linux. These include the iostat, mpstat, pidstat, sadf, +sysstat: and sar tools. sysstat: sysstat: The sysstat utilities were written by Sebastien Godard. sysstat: -sysstat: -sysstat: +sysstat: For more information, see the sysstat web site: +sysstat: http://pagesperso-orange.fr/sebastien.godard/ sysstat: diff --git a/source/ap/sysstat/sysstat.SlackBuild b/source/ap/sysstat/sysstat.SlackBuild index 399bb4bd4..5f5c0cfb1 100755 --- a/source/ap/sysstat/sysstat.SlackBuild +++ b/source/ap/sysstat/sysstat.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,13 +22,42 @@ PKGNAM=sysstat -VERSION=${VERSION:-7.0.0} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} -if [ "$ARCH" = "x86_64" ]; then +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" + ARCHQUADLET="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" + ARCHQUADLET="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" + ARCHQUADLET="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + ARCHQUADLET="" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "arm" ]; then + SLKCFLAGS="-O2 -march=armv4t" + LIBDIRSUFFIX="" + ARCHQUADLET="-gnueabi" else + SLKCFLAGS="-O2" + ARCHQUADLET="" LIBDIRSUFFIX="" fi @@ -40,8 +69,8 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xjvf $CWD/${PKGNAM}-$VERSION.tar.bz2 -cd ${PKGNAM}-$VERSION +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . @@ -51,25 +80,31 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Put the config file in /etc/sysstat, not /etc/sysconfig (a Red Hat thing): -zcat $CWD/sysstat.etc.sysstat.diff.gz | patch -p1 --verbose || exit 1 - -# PREFIX is hardcoded in some places, so this is just easier: -zcat $CWD/sysstat.prefix.usr.diff.gz | patch -p1 --verbose || exit 1 - -# Don't use /tmp in a script root will probably run... that's not good. -zcat $CWD/sysstat.var.run.diff.gz | patch -p1 --verbose || exit 1 - -make SA_LIB_DIR=/usr/lib${LIBDIRSUFFIX}/sa DESTDIR=$PKG || exit 1 -make install SA_LIB_DIR=/usr/lib${LIBDIRSUFFIX}/sa DESTDIR=$PKG || exit 1 - -# Yeah, technically this is an init script that could go in /etc/rc.d/, but -# I'd rather not put too many things in there. If you need this, I'm sure -# you will find it here: -mkdir -p $PKG/etc/sysstat -cp -a sysstat $PKG/etc/sysstat/sysstat -chown root:root $PKG/etc/sysstat/sysstat -chmod 755 $PKG/etc/sysstat/sysstat +# Configure: +CFLAGS="$SLKCFLAGS -DSADC_PATH=/usr/lib$LIBDIRSUFFIX/sa/sadc" \ +./configure \ + --disable-man-group \ + --prefix=/usr \ + --sysconfdir=/etc \ + conf_dir=/etc/sysstat \ + sa_lib_dir=/usr/lib$LIBDIRSUFFIX/sa \ + --libdir=/usr/lib$LIBDIRSUFFIX \ + --infodir=/usr/info \ + --docdir=/usr/doc/sysstat-$VERSION \ + --mandir=/usr/man \ + --disable-static \ + --build=$ARCH-slackware-linux$ARCHQUADLET || exit 1 + +# Build and install: +make $NUMJOBS || make || exit 1 +make install IGNORE_MAN_GROUP=y DESTDIR=$PKG || exit 1 + +mv $PKG/etc/sysstat/sysstat $PKG/etc/sysstat/sysstat.new + +mkdir -p $PKG/etc/rc.d +# Cosmetic touches: +sed -i 's?/etc/rc.d/init.d/sysstat?/etc/rc.d/rc.sysstat?g' sysstat +install -o0 -g0 -vpm644 sysstat $PKG/etc/rc.d/rc.sysstat.new # Strip binaries: ( cd $PKG @@ -92,14 +127,30 @@ if [ -d $PKG/usr/man ]; then ) fi -# Fix the documentation directory to preserve timestamps: -mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION -rm -f $PKG/usr/doc/${PKGNAM}-$VERSION/* +# Adjust the docs so that they are Slackware-locationised: +# We ignore the 'CHANGES' since they aren't relevant to the running of the system. +sed -i 's?/etc/sysconfig?/etc/sysstat?g' $PKG/usr/doc/$PKGNAM-$VERSION/{README,FAQ} +# "make install" installs the docs but doesn't preserve the time stamps: +for docfile in $( cd $PKG/usr/doc/$PKGNAM-$VERSION ; ls -1 ) ; do + touch -d "$( find $docfile -printf "%t\n" )" $PKG/usr/doc/$PKGNAM-$VERSION/$docfile +done +# Add crontab example scripts: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION/cron-examples cp -a \ - COPYING CREDITS FAQ README TODO sysstat-7.0.0.lsm \ - $PKG/usr/doc/${PKGNAM}-$VERSION + crontab sysstat.cron.daily sysstat.cron.hourly sysstat.crond \ + sysstat.crond.sample \ + $PKG/usr/doc/${PKGNAM}-$VERSION/cron-examples + +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $TMP/package-${PKGNAM} diff --git a/source/ap/sysstat/sysstat.etc.sysstat.diff b/source/ap/sysstat/sysstat.etc.sysstat.diff deleted file mode 100644 index f5cf15211..000000000 --- a/source/ap/sysstat/sysstat.etc.sysstat.diff +++ /dev/null @@ -1,46 +0,0 @@ ---- ./Makefile.orig 2006-07-05 10:46:04.000000000 -0500 -+++ ./Makefile 2006-08-14 21:40:38.000000000 -0500 -@@ -34,7 +34,7 @@ - MAN8_DIR = $(MAN_DIR)/man8 - DOC_DIR = $(PREFIX)/doc/sysstat-$(VERSION) - NLS_DIR = $(PREFIX)/share/locale --SYSCONFIG_DIR = /etc/sysconfig -+SYSCONFIG_DIR = /etc/sysstat - - # Compiler flags - CFLAGS = -Wall -Wstrict-prototypes -pipe -O2 -fno-strength-reduce ---- ./sa2.in.orig 2006-06-09 03:17:26.000000000 -0500 -+++ ./sa2.in 2006-08-14 21:38:35.000000000 -0500 -@@ -7,7 +7,7 @@ - # make history configurable - # - HISTORY=7 --[ -r /etc/sysconfig/sysstat ] && . /etc/sysconfig/sysstat -+[ -r /etc/sysstat/sysstat ] && . /etc/sysstat/sysstat - [ ${HISTORY} -gt 28 ] && HISTORY=28 - S_TIME_FORMAT=ISO ; export S_TIME_FORMAT - umask 0022 ---- ./README.orig 2006-07-05 10:51:54.000000000 -0500 -+++ ./README 2006-08-14 21:39:27.000000000 -0500 -@@ -91,8 +91,8 @@ - ${PREFIX}/doc/sysstat-x.y.z/* - /var/log/sa - ${INIT_DIR}/sysstat --/etc/sysconfig/sysstat --/etc/sysconfig/sysstat.ioconf -+/etc/sysstat/sysstat -+/etc/sysstat/sysstat.ioconf - /etc/cron.d/sysstat - /etc/rc.d/rc.sysstat for [SLACKWARE] - ${RC_DIR}/rc2.d/S03sysstat ---- ./ioconf.h.orig 2006-07-09 03:19:06.000000000 -0500 -+++ ./ioconf.h 2006-08-14 21:36:48.000000000 -0500 -@@ -20,7 +20,7 @@ - #define MAX_BLKDEV 255 - #endif - --#define IOCONF "/etc/sysconfig/sysstat.ioconf" -+#define IOCONF "/etc/sysstat/sysstat.ioconf" - - #define K_NODEV "nodev" - diff --git a/source/ap/sysstat/sysstat.prefix.usr.diff b/source/ap/sysstat/sysstat.prefix.usr.diff deleted file mode 100644 index c7c526b42..000000000 --- a/source/ap/sysstat/sysstat.prefix.usr.diff +++ /dev/null @@ -1,42 +0,0 @@ ---- ./build/Configure.sh.orig 2006-06-09 03:21:27.000000000 -0500 -+++ ./build/Configure.sh 2006-08-14 21:54:37.000000000 -0500 -@@ -10,10 +10,10 @@ - - # Installation directory - --PREFIX=`${ASK} 'Installation directory:' "/usr/local" "prefix"` -+PREFIX=`${ASK} 'Installation directory:' "/usr" "prefix"` - if [ ! -d ${PREFIX} ]; then -- echo "WARNING: Directory ${PREFIX} not found: Using default (/usr/local)." -- PREFIX=/usr/local -+ echo "WARNING: Directory ${PREFIX} not found: Using default (/usr)." -+ PREFIX=/usr - fi - - # sadc directory ---- ./build/CONFIG.def.orig 2006-06-09 03:20:56.000000000 -0500 -+++ ./build/CONFIG.def 2006-08-14 21:54:19.000000000 -0500 -@@ -2,8 +2,8 @@ - # (C) 2000-2006 Sebastien GODARD (sysstat <at> wanadoo.fr) - - # Directories --PREFIX = /usr/local --SA_LIB_DIR = /usr/local/lib/sa -+PREFIX = /usr -+SA_LIB_DIR = /usr/lib/sa - SADC_PATH = ${SA_LIB_DIR}/sadc - SA_DIR = /var/log/sa - # Do not use ${PREFIX}/share/man by default: not necessarily in man path! ---- ./build/CONFIG.orig 2006-07-09 04:47:17.000000000 -0500 -+++ ./build/CONFIG 2006-08-14 21:54:10.000000000 -0500 -@@ -2,8 +2,8 @@ - # (C) 2000-2006 Sebastien GODARD (sysstat <at> wanadoo.fr) - - # Directories --PREFIX = /usr/local --SA_LIB_DIR = /usr/local/lib/sa -+PREFIX = /usr -+SA_LIB_DIR = /usr/lib/sa - SADC_PATH = ${SA_LIB_DIR}/sadc - SA_DIR = /var/log/sa - # Do not use ${PREFIX}/share/man by default: not necessarily in man path! diff --git a/source/ap/sysstat/sysstat.var.run.diff b/source/ap/sysstat/sysstat.var.run.diff deleted file mode 100644 index 3b54f37e6..000000000 --- a/source/ap/sysstat/sysstat.var.run.diff +++ /dev/null @@ -1,28 +0,0 @@ ---- ./sysstat.in.orig 2006-07-05 10:58:00.000000000 -0500 -+++ ./sysstat.in 2006-08-14 22:03:13.000000000 -0500 -@@ -22,21 +22,21 @@ - - RETVAL=0 - # Remove flag indicating that sadc was successfully launched --rm -f /tmp/sysstat.run -+rm -f /var/run/sysstat.run - - # See how we were called. - case "$1" in - start) - echo -n "Calling the system activity data collector (sadc): " -- SU SA_LIB_DIR/sadc -F -L - && touch /tmp/sysstat.run QUOTE -+ SU SA_LIB_DIR/sadc -F -L - && touch /var/run/sysstat.run QUOTE - - # Try to guess if sadc was successfully launched. The difficulty - # here is that the exit code is lost when the above command is - # run via "su foo -c ..." -- if [ ! -f /tmp/sysstat.run ]; then -+ if [ ! -f /var/run/sysstat.run ]; then - RETVAL=1 - else -- rm -f /tmp/sysstat.run -+ rm -f /var/run/sysstat.run - fi - echo - ;; diff --git a/source/ap/vim/patches/7.2.246 b/source/ap/vim/patches/7.2.246 new file mode 100644 index 000000000..5b1c97861 --- /dev/null +++ b/source/ap/vim/patches/7.2.246 @@ -0,0 +1,53 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.246 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.246 +Problem: Cscope home page link is wrong. +Solution: Update the URL. (Sergey Khorev) +Files: runtime/doc/if_cscop.txt + + +*** ../vim-7.2.245/runtime/doc/if_cscop.txt 2009-07-09 21:22:36.000000000 +0200 +--- runtime/doc/if_cscop.txt 2009-09-11 11:19:31.000000000 +0200 +*************** +*** 481,487 **** + any problems, suggestions, patches, et al., you have for the usage of + cscope within Vim to him. + *cscope-win32* +! For a cscope version for Win32 see: http://iamphet.nm.ru/cscope/index.html + + Win32 support was added by Sergey Khorev <sergey.khorev@gmail.com>. Contact + him if you have Win32-specific issues. +--- 481,488 ---- + any problems, suggestions, patches, et al., you have for the usage of + cscope within Vim to him. + *cscope-win32* +! For a cscope version for Win32 see: +! http://code.google.com/p/cscope-win32/ + + Win32 support was added by Sergey Khorev <sergey.khorev@gmail.com>. Contact + him if you have Win32-specific issues. +*** ../vim-7.2.245/src/version.c 2009-07-29 18:24:59.000000000 +0200 +--- src/version.c 2009-09-11 11:29:02.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 246, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +221. Your wife melts your keyboard in the oven. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.247 b/source/ap/vim/patches/7.2.247 new file mode 100644 index 000000000..e18926d9f --- /dev/null +++ b/source/ap/vim/patches/7.2.247 @@ -0,0 +1,86 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.247 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.247 +Problem: Mzscheme interface minor problem. +Solution: Better error message when build fails. (Sergey Khorev) +Files: src/if_mzsch.c + + +*** ../vim-7.2.246/src/if_mzsch.c 2009-07-09 20:06:30.000000000 +0200 +--- src/if_mzsch.c 2009-09-11 11:20:39.000000000 +0200 +*************** +*** 635,642 **** + #endif /* DYNAMIC_MZSCHEME */ + + /* need to put it here for dynamic stuff to work */ +! #ifdef INCLUDE_MZSCHEME_BASE + # include "mzscheme_base.c" + #endif + + /* +--- 635,644 ---- + #endif /* DYNAMIC_MZSCHEME */ + + /* need to put it here for dynamic stuff to work */ +! #if defined(INCLUDE_MZSCHEME_BASE) + # include "mzscheme_base.c" ++ #elif MZSCHEME_VERSION_MAJOR >= 400 ++ # error MzScheme 4.x must include mzscheme_base.c, for MinGW32 you need to define MZSCHEME_GENERATE_BASE=yes + #endif + + /* +*************** +*** 875,888 **** + #ifdef INCLUDE_MZSCHEME_BASE + { + /* +! * versions 4.x do not provide Scheme bindings by defaults + * we need to add them explicitly + */ + Scheme_Object *scheme_base_symbol = NULL; + MZ_GC_DECL_REG(1); + MZ_GC_VAR_IN_REG(0, scheme_base_symbol); + MZ_GC_REG(); +! /* invoke function from generated and included base.c */ + declare_modules(environment); + scheme_base_symbol = scheme_intern_symbol("scheme/base"); + MZ_GC_CHECK(); +--- 877,890 ---- + #ifdef INCLUDE_MZSCHEME_BASE + { + /* +! * versions 4.x do not provide Scheme bindings by default + * we need to add them explicitly + */ + Scheme_Object *scheme_base_symbol = NULL; + MZ_GC_DECL_REG(1); + MZ_GC_VAR_IN_REG(0, scheme_base_symbol); + MZ_GC_REG(); +! /* invoke function from generated and included mzscheme_base.c */ + declare_modules(environment); + scheme_base_symbol = scheme_intern_symbol("scheme/base"); + MZ_GC_CHECK(); +*** ../vim-7.2.246/src/version.c 2009-09-11 11:30:12.000000000 +0200 +--- src/version.c 2009-09-11 11:53:59.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 247, + /**/ + +-- +Your fault: core dumped + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.248 b/source/ap/vim/patches/7.2.248 new file mode 100644 index 000000000..2254101e9 --- /dev/null +++ b/source/ap/vim/patches/7.2.248 @@ -0,0 +1,158 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.248 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.248 (extra) +Problem: Mzscheme interface building minor problems. +Solution: Update Win32 makefiles. (Sergey Khorev) +Files: src/Make_cyg.mak, src/Make_ming.mak, src/Make_mvc.mak + + +*** ../vim-7.2.247/src/Make_cyg.mak 2007-09-30 22:28:48.000000000 +0200 +--- src/Make_cyg.mak 2009-09-11 11:23:23.000000000 +0200 +*************** +*** 212,224 **** + MZSCHEME_VER = 209_000 + endif + + ifeq (yes, $(DYNAMIC_MZSCHEME)) + DEFINES += -DDYNAMIC_MZSCHEME -DDYNAMIC_MZSCH_DLL=\"libmzsch$(MZSCHEME_VER).dll\" -DDYNAMIC_MZGC_DLL=\"libmzgc$(MZSCHEME_VER).dll\" + else + ifndef MZSCHEME_DLLS + MZSCHEME_DLLS = $(MZSCHEME) + endif +! EXTRA_LIBS += -L$(MZSCHEME_DLLS) -lmzsch$(MZSCHEME_VER) -lmzgc$(MZSCHEME_VER) + endif + endif + +--- 212,245 ---- + MZSCHEME_VER = 209_000 + endif + ++ ifndef MZSCHEME_PRECISE_GC ++ MZSCHEME_PRECISE_GC=no ++ endif ++ ++ # for version 4.x we need to generate byte-code for Scheme base ++ ifndef MZSCHEME_GENERATE_BASE ++ MZSCHEME_GENERATE_BASE=no ++ endif ++ + ifeq (yes, $(DYNAMIC_MZSCHEME)) + DEFINES += -DDYNAMIC_MZSCHEME -DDYNAMIC_MZSCH_DLL=\"libmzsch$(MZSCHEME_VER).dll\" -DDYNAMIC_MZGC_DLL=\"libmzgc$(MZSCHEME_VER).dll\" + else + ifndef MZSCHEME_DLLS + MZSCHEME_DLLS = $(MZSCHEME) + endif +! ifeq (yes,$(MZSCHEME_PRECISE_GC)) +! MZSCHEME_LIB=-lmzsch$(MZSCHEME_VER) +! else +! MZSCHEME_LIB = -lmzsch$(MZSCHEME_VER) -lmzgc$(MZSCHEME_VER) +! endif +! EXTRA_LIBS += -L$(MZSCHEME_DLLS) -L$(MZSCHEME_DLLS)/lib $(MZSCHEME_LIB) +! endif +! ifeq (yes,$(MZSCHEME_GENERATE_BASE)) +! DEFINES += -DINCLUDE_MZSCHEME_BASE +! MZ_EXTRA_DEP += mzscheme_base.c +! endif +! ifeq (yes,$(MZSCHEME_PRECISE_GC)) +! DEFINES += -DMZ_PRECISE_GC + endif + endif + +*************** +*** 473,478 **** +--- 494,502 ---- + ifdef PERL + -$(DEL) if_perl.c + endif ++ ifdef MZSCHEME ++ -$(DEL) mzscheme_base.c ++ endif + -$(DEL) pathdef.c + $(MAKE) -C xxd -f Make_cyg.mak clean + $(MAKE) -C GvimExt -f Make_ming.mak clean +*************** +*** 523,531 **** +--- 547,561 ---- + $(OUTDIR)/netbeans.o: netbeans.c $(INCL) $(NBDEBUG_DEP) + $(CC) -c $(CFLAGS) netbeans.c -o $(OUTDIR)/netbeans.o + ++ $(OUTDIR)/if_mzsch.o: if_mzsch.c $(INCL) if_mzsch.h $(MZ_EXTRA_DEP) ++ $(CC) -c $(CFLAGS) if_mzsch.c -o $(OUTDIR)/if_mzsch.o ++ + $(OUTDIR)/vimrc.o: vim.rc version.h gui_w32_rc.h + $(RC) $(RCFLAGS) vim.rc -o $(OUTDIR)/vimrc.o + ++ mzscheme_base.c: ++ $(MZSCHEME)/mzc --c-mods mzscheme_base.c ++lib scheme/base ++ + pathdef.c: $(INCL) + ifneq (sh.exe, $(SHELL)) + @echo creating pathdef.c +*** ../vim-7.2.247/src/Make_ming.mak 2009-05-26 22:58:43.000000000 +0200 +--- src/Make_ming.mak 2009-09-11 11:23:28.000000000 +0200 +*************** +*** 135,141 **** + ifndef MZSCHEME_DLLS + MZSCHEME_DLLS=$(MZSCHEME) + endif +! MZSCHEME_LIBDIR=-L$(MZSCHEME_DLLS) + endif + + endif +--- 135,141 ---- + ifndef MZSCHEME_DLLS + MZSCHEME_DLLS=$(MZSCHEME) + endif +! MZSCHEME_LIBDIR=-L$(MZSCHEME_DLLS) -L$(MZSCHEME_DLLS)\lib + endif + + endif +*************** +*** 563,568 **** +--- 563,571 ---- + ifdef PERL + -$(DEL) if_perl.c + endif ++ ifdef MZSCHEME ++ -$(DEL) mzscheme_base.c ++ endif + $(MAKE) -C GvimExt -f Make_ming.mak clean + $(MAKE) -C xxd -f Make_cyg.mak clean + +*** ../vim-7.2.247/src/Make_mvc.mak 2009-06-16 16:45:14.000000000 +0200 +--- src/Make_mvc.mak 2009-09-11 11:23:28.000000000 +0200 +*************** +*** 865,870 **** +--- 865,871 ---- + - if exist dimm_i.c del dimm_i.c + - if exist dimm.tlb del dimm.tlb + - if exist dosinst.exe del dosinst.exe ++ - if exist mzscheme_base.c del mzscheme_base.c + cd xxd + $(MAKE) /NOLOGO -f Make_mvc.mak clean + cd .. +*** ../vim-7.2.247/src/version.c 2009-09-11 12:20:47.000000000 +0200 +--- src/version.c 2009-09-11 12:48:26.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 248, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +222. You send more than 20 personal e-mails a day. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.249 b/source/ap/vim/patches/7.2.249 new file mode 100644 index 000000000..33169f77f --- /dev/null +++ b/source/ap/vim/patches/7.2.249 @@ -0,0 +1,47 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.249 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.249 +Problem: The script to check .po files can't handle '%' in plural forms. +Solution: Remove "Plural-Forms:" from the checked string. +Files: src/po/check.vim + + +*** ../vim-7.2.248/src/po/check.vim 2008-06-09 14:45:38.000000000 +0200 +--- src/po/check.vim 2009-09-11 12:37:56.000000000 +0200 +*************** +*** 23,28 **** +--- 23,31 ---- + " remove '%', not used for formatting. + let idline = substitute(idline, "'%'", '', 'g') + ++ " remove '%' used for plural forms. ++ let idline = substitute(idline, '\\nPlural-Forms: .\+;\\n', '', '') ++ + " remove everything but % items. + return substitute(idline, '[^%]*\(%[-+ #''.0-9*]*l\=[dsuxXpoc%]\)\=', '\1', 'g') + endfunc +*** ../vim-7.2.248/src/version.c 2009-09-11 12:48:56.000000000 +0200 +--- src/version.c 2009-09-11 12:59:18.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 249, + /**/ + +-- +If evolution theories are correct, humans will soon grow a third +hand for operating the mouse. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.250 b/source/ap/vim/patches/7.2.250 new file mode 100644 index 000000000..2f30a2405 --- /dev/null +++ b/source/ap/vim/patches/7.2.250 @@ -0,0 +1,55 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.250 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.250 (extra) +Problem: Possible buffer overflow. +Solution: Compute the remaining space. (Dominique Pelle) +Files: src/GvimExt/gvimext.cpp + + +*** ../vim-7.2.249/src/GvimExt/gvimext.cpp 2008-07-24 20:51:11.000000000 +0200 +--- src/GvimExt/gvimext.cpp 2009-09-11 13:26:27.000000000 +0200 +*************** +*** 635,641 **** + } + // Now concatenate + strncpy(temp, _("Edit with existing Vim - "), BUFSIZE - 1); +! strncat(temp, title, BUFSIZE - 1); + InsertMenu(hMenu, + indexMenu++, + MF_STRING|MF_BYPOSITION, +--- 635,643 ---- + } + // Now concatenate + strncpy(temp, _("Edit with existing Vim - "), BUFSIZE - 1); +! temp[BUFSIZE - 1] = '\0'; +! strncat(temp, title, BUFSIZE - 1 - strlen(temp)); +! temp[BUFSIZE - 1] = '\0'; + InsertMenu(hMenu, + indexMenu++, + MF_STRING|MF_BYPOSITION, +*** ../vim-7.2.249/src/version.c 2009-09-11 12:59:57.000000000 +0200 +--- src/version.c 2009-09-11 13:23:45.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 250, + /**/ + + +-- +hundred-and-one symptoms of being an internet addict: +223. You set up a web-cam as your home's security system. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.251 b/source/ap/vim/patches/7.2.251 new file mode 100644 index 000000000..00cf0f0f8 --- /dev/null +++ b/source/ap/vim/patches/7.2.251 @@ -0,0 +1,71 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.251 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.251 (after 7.2.044) +Problem: Compiler adds invalid memory bounds check. +Solution: Remove _FORTIFY_SOURCE=2 from CFLAGS. (Dominique Pelle) +Files: src/auto/configure, src/configure.in + + +*** ../vim-7.2.250/src/auto/configure 2009-07-22 11:16:54.000000000 +0200 +--- src/auto/configure 2009-08-07 14:49:52.000000000 +0200 +*************** +*** 17135,17141 **** + { $as_echo "$as_me:$LINENO: checking whether we need -D_FORTIFY_SOURCE=1" >&5 + $as_echo_n "checking whether we need -D_FORTIFY_SOURCE=1... " >&6; } + if test "$gccmajor" -gt "3"; then +! CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=1" + { $as_echo "$as_me:$LINENO: result: yes" >&5 + $as_echo "yes" >&6; } + else +--- 17135,17141 ---- + { $as_echo "$as_me:$LINENO: checking whether we need -D_FORTIFY_SOURCE=1" >&5 + $as_echo_n "checking whether we need -D_FORTIFY_SOURCE=1... " >&6; } + if test "$gccmajor" -gt "3"; then +! CFLAGS=`echo "$CFLAGS -D_FORTIFY_SOURCE=1" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=2//g' -e 's/-D_FORTIFY_SOURCE=2//g'` + { $as_echo "$as_me:$LINENO: result: yes" >&5 + $as_echo "yes" >&6; } + else +*** ../vim-7.2.250/src/configure.in 2009-07-22 11:16:54.000000000 +0200 +--- src/configure.in 2009-08-07 14:49:47.000000000 +0200 +*************** +*** 3233,3239 **** + dnl declared as char x[1] but actually longer. Introduced in gcc 4.0. + AC_MSG_CHECKING(whether we need -D_FORTIFY_SOURCE=1) + if test "$gccmajor" -gt "3"; then +! CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=1" + AC_MSG_RESULT(yes) + else + AC_MSG_RESULT(no) +--- 3233,3239 ---- + dnl declared as char x[1] but actually longer. Introduced in gcc 4.0. + AC_MSG_CHECKING(whether we need -D_FORTIFY_SOURCE=1) + if test "$gccmajor" -gt "3"; then +! CFLAGS=`echo "$CFLAGS -D_FORTIFY_SOURCE=1" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=2//g' -e 's/-D_FORTIFY_SOURCE=2//g'` + AC_MSG_RESULT(yes) + else + AC_MSG_RESULT(no) +*** ../vim-7.2.250/src/version.c 2009-09-11 13:26:38.000000000 +0200 +--- src/version.c 2009-09-11 13:43:46.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 251, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +225. You sign up for free subscriptions for all the computer magazines + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.252 b/source/ap/vim/patches/7.2.252 new file mode 100644 index 000000000..b7dc7022b --- /dev/null +++ b/source/ap/vim/patches/7.2.252 @@ -0,0 +1,51 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.252 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.252 +Problem: When using a multi-byte 'enc' the 'iskeyword' option cannot + contain characters above 128. +Solution: Use mb_ptr2char_adv(). +Files: src/charset.c + + +*** ../vim-7.2.251/src/charset.c 2009-05-14 22:19:19.000000000 +0200 +--- src/charset.c 2009-09-09 21:11:46.000000000 +0200 +*************** +*** 174,179 **** +--- 174,184 ---- + if (VIM_ISDIGIT(*p)) + c = getdigits(&p); + else ++ #ifdef FEAT_MBYTE ++ if (has_mbyte) ++ c = mb_ptr2char_adv(&p); ++ else ++ #endif + c = *p++; + c2 = -1; + if (*p == '-' && p[1] != NUL) +*** ../vim-7.2.251/src/version.c 2009-09-11 13:44:33.000000000 +0200 +--- src/version.c 2009-09-11 14:01:48.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 252, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +226. You sit down at the computer right after dinner and your spouse + says "See you in the morning." + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.253 b/source/ap/vim/patches/7.2.253 new file mode 100644 index 000000000..354d444dd --- /dev/null +++ b/source/ap/vim/patches/7.2.253 @@ -0,0 +1,143 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.253 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.253 +Problem: Netbeans interface: getLength always uses current buffer. +Solution: Use ml_get_buf() instead of ml_get(). (Xavier de Gaye) +Files: src/netbeans.c + + +*** ../vim-7.2.252/src/netbeans.c 2009-06-24 16:49:50.000000000 +0200 +--- src/netbeans.c 2009-09-11 13:40:14.000000000 +0200 +*************** +*** 1499,1505 **** + return FAIL; + } + first = *pos; +! nbdebug((" FIRST POS: line %d, col %d\n", first.lnum, first.col)); + pos = off2pos(buf->bufp, off+count-1); + if (!pos) + { +--- 1499,1506 ---- + return FAIL; + } + first = *pos; +! nbdebug((" FIRST POS: line %d, col %d\n", +! first.lnum, first.col)); + pos = off2pos(buf->bufp, off+count-1); + if (!pos) + { +*************** +*** 1510,1516 **** + return FAIL; + } + last = *pos; +! nbdebug((" LAST POS: line %d, col %d\n", last.lnum, last.col)); + del_from_lnum = first.lnum; + del_to_lnum = last.lnum; + doupdate = 1; +--- 1511,1518 ---- + return FAIL; + } + last = *pos; +! nbdebug((" LAST POS: line %d, col %d\n", +! last.lnum, last.col)); + del_from_lnum = first.lnum; + del_to_lnum = last.lnum; + doupdate = 1; +*************** +*** 1521,1527 **** + next = off2pos(buf->bufp, off + count); + + /* Remove part of the first line. */ +! if (first.col != 0 || (next != NULL && first.lnum == next->lnum)) + { + if (first.lnum != last.lnum + || (next != NULL && first.lnum != next->lnum)) +--- 1523,1530 ---- + next = off2pos(buf->bufp, off + count); + + /* Remove part of the first line. */ +! if (first.col != 0 +! || (next != NULL && first.lnum == next->lnum)) + { + if (first.lnum != last.lnum + || (next != NULL && first.lnum != next->lnum)) +*************** +*** 1584,1590 **** + int id = buf_findsign_id(buf->bufp, (linenr_T)i); + if (id > 0) + { +! nbdebug((" Deleting sign %d on line %d\n", id, i)); + buf_delsign(buf->bufp, id); + } + else +--- 1587,1594 ---- + int id = buf_findsign_id(buf->bufp, (linenr_T)i); + if (id > 0) + { +! nbdebug((" Deleting sign %d on line %d\n", +! id, i)); + buf_delsign(buf->bufp, id); + } + else +*************** +*** 1593,1599 **** + } + } + +! nbdebug((" Deleting lines %d through %d\n", del_from_lnum, del_to_lnum)); + curwin->w_cursor.lnum = del_from_lnum; + curwin->w_cursor.col = 0; + del_lines(del_to_lnum - del_from_lnum + 1, FALSE); +--- 1597,1604 ---- + } + } + +! nbdebug((" Deleting lines %d through %d\n", +! del_from_lnum, del_to_lnum)); + curwin->w_cursor.lnum = del_from_lnum; + curwin->w_cursor.col = 0; + del_lines(del_to_lnum - del_from_lnum + 1, FALSE); +*************** +*** 3514,3520 **** + eol_size = 1; + for (lnum = 1; lnum <= bufp->b_ml.ml_line_count; ++lnum) + { +! char_count += (long)STRLEN(ml_get(lnum)) + eol_size; + /* Check for a CTRL-C every 100000 characters */ + if (char_count > last_check) + { +--- 3519,3526 ---- + eol_size = 1; + for (lnum = 1; lnum <= bufp->b_ml.ml_line_count; ++lnum) + { +! char_count += (long)STRLEN(ml_get_buf(bufp, lnum, FALSE)) +! + eol_size; + /* Check for a CTRL-C every 100000 characters */ + if (char_count > last_check) + { +*** ../vim-7.2.252/src/version.c 2009-09-11 14:02:25.000000000 +0200 +--- src/version.c 2009-09-11 14:18:45.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 253, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +227. You sleep next to your monitor. Or on top of it. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.254 b/source/ap/vim/patches/7.2.254 new file mode 100644 index 000000000..c8c57affb --- /dev/null +++ b/source/ap/vim/patches/7.2.254 @@ -0,0 +1,52 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.254 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.254 +Problem: Compiler warning for assigning size_t to int. +Solution: Use size_t for the variable. (George Reilly) +Files: src/fileio.c + + +*** ../vim-7.2.253/src/fileio.c 2009-07-29 18:24:59.000000000 +0200 +--- src/fileio.c 2009-09-11 13:46:19.000000000 +0200 +*************** +*** 4568,4574 **** + c = TRUE; + if (write_info.bw_conv_error_lnum != 0) + { +! int l = STRLEN(IObuff); + vim_snprintf((char *)IObuff + l, IOSIZE - l, _(" in line %ld;"), + (long)write_info.bw_conv_error_lnum); + } +--- 4568,4574 ---- + c = TRUE; + if (write_info.bw_conv_error_lnum != 0) + { +! size_t l = STRLEN(IObuff); + vim_snprintf((char *)IObuff + l, IOSIZE - l, _(" in line %ld;"), + (long)write_info.bw_conv_error_lnum); + } +*** ../vim-7.2.253/src/version.c 2009-09-11 14:19:41.000000000 +0200 +--- src/version.c 2009-09-11 15:03:42.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 254, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +230. You spend your Friday nights typing away at your keyboard + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.255 b/source/ap/vim/patches/7.2.255 new file mode 100644 index 000000000..1bb85b153 --- /dev/null +++ b/source/ap/vim/patches/7.2.255 @@ -0,0 +1,71 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.255 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.255 (after 7.2.242) +Problem: Setting 'rightleft', 'linebreak' and 'wrap' may cause cursor to be + in wrong place. +Solution: Recompute the cursor column for these options. +Files: src/option.c + + +*** ../vim-7.2.254/src/option.c 2009-07-29 15:41:32.000000000 +0200 +--- src/option.c 2009-09-11 13:59:55.000000000 +0200 +*************** +*** 7430,7435 **** +--- 7430,7437 ---- + { + if (curwin->w_p_wrap) + curwin->w_leftcol = 0; ++ if (curwin->w_curswant != MAXCOL) ++ curwin->w_set_curswant = TRUE; + } + + #ifdef FEAT_WINDOWS +*************** +*** 7664,7669 **** +--- 7666,7687 ---- + } + #endif + ++ #ifdef FEAT_LINEBREAK ++ if ((int *)varp == &curwin->w_p_lbr) ++ { ++ if (curwin->w_curswant != MAXCOL) ++ curwin->w_set_curswant = TRUE; ++ } ++ #endif ++ ++ #ifdef FEAT_RIGHTLEFT ++ if ((int *)varp == &curwin->w_p_rl) ++ { ++ if (curwin->w_curswant != MAXCOL) ++ curwin->w_set_curswant = TRUE; ++ } ++ #endif ++ + /* + * End of handling side effects for bool options. + */ +*** ../vim-7.2.254/src/version.c 2009-09-11 15:04:13.000000000 +0200 +--- src/version.c 2009-09-11 15:19:40.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 255, + /**/ + +-- +A computer without Windows is like a fish without a bicycle. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.256 b/source/ap/vim/patches/7.2.256 new file mode 100644 index 000000000..17361fbf1 --- /dev/null +++ b/source/ap/vim/patches/7.2.256 @@ -0,0 +1,59 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.256 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.256 +Problem: When 'guifont' was not set GTK font dialog doesn't have a default. + (Andreas Metzler) +Solution: Set default to DEFAULT_FONT. (James Vega) +Files: src/gui_gtk_x11.c + + +*** ../vim-7.2.255/src/gui_gtk_x11.c 2009-07-01 18:04:30.000000000 +0200 +--- src/gui_gtk_x11.c 2009-09-11 14:21:32.000000000 +0200 +*************** +*** 4729,4734 **** +--- 4729,4737 ---- + if (oldval != NULL && *oldval != NUL) + gtk_font_selection_dialog_set_font_name( + GTK_FONT_SELECTION_DIALOG(gui.fontdlg), (char *)oldval); ++ else ++ gtk_font_selection_dialog_set_font_name( ++ GTK_FONT_SELECTION_DIALOG(gui.fontdlg), DEFAULT_FONT); + + if (gui.fontname) + { +*************** +*** 4816,4821 **** +--- 4819,4827 ---- + if (oldname != oldval) + vim_free(oldname); + } ++ else ++ gtk_font_selection_dialog_set_font_name( ++ GTK_FONT_SELECTION_DIALOG(dialog), DEFAULT_FONT); + + response = gtk_dialog_run(GTK_DIALOG(dialog)); + +*** ../vim-7.2.255/src/version.c 2009-09-11 15:20:22.000000000 +0200 +--- src/version.c 2009-09-11 15:45:36.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 256, + /**/ + +-- +Get a life? What is the URL where it can be downloaded? + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.257 b/source/ap/vim/patches/7.2.257 new file mode 100644 index 000000000..a856a3acb --- /dev/null +++ b/source/ap/vim/patches/7.2.257 @@ -0,0 +1,61 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.257 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.257 +Problem: With GTK 2.17 lots of assertion error messages. +Solution: Remove check for static gravity. (Sebastian Droege) +Files: src/gui_gtk_f.c + + +*** ../vim-7.2.256/src/gui_gtk_f.c 2009-05-17 23:25:16.000000000 +0200 +--- src/gui_gtk_f.c 2009-09-11 15:15:41.000000000 +0200 +*************** +*** 860,870 **** + gtk_form_set_static_gravity(GdkWindow *window, gboolean use_static) + { + #ifdef HAVE_GTK2 +! gboolean static_gravity_supported; +! +! static_gravity_supported = gdk_window_set_static_gravities(window, +! use_static); +! g_return_if_fail(static_gravity_supported); + #else + XSetWindowAttributes xattributes; + +--- 860,868 ---- + gtk_form_set_static_gravity(GdkWindow *window, gboolean use_static) + { + #ifdef HAVE_GTK2 +! /* We don't check if static gravity is actually supported, because it +! * results in an annoying assertion error message. */ +! gdk_window_set_static_gravities(window, use_static); + #else + XSetWindowAttributes xattributes; + +*** ../vim-7.2.256/src/version.c 2009-09-11 15:46:20.000000000 +0200 +--- src/version.c 2009-09-11 16:16:52.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 257, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +231. You sprinkle Carpet Fresh on the rugs and put your vacuum cleaner + in the front doorway permanently so it always looks like you are + actually attempting to do something about that mess that has amassed + since you discovered the Internet. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.258 b/source/ap/vim/patches/7.2.258 new file mode 100644 index 000000000..98ddab580 --- /dev/null +++ b/source/ap/vim/patches/7.2.258 @@ -0,0 +1,74 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.258 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.258 +Problem: v:beval_col and b:beval_text are wrong in UTF-8 text. (Tony + Mechelynck) +Solution: Use byte number instead of character number for the column. +Files: src/ui.c + + +*** ../vim-7.2.257/src/ui.c 2009-07-01 18:04:30.000000000 +0200 +--- src/ui.c 2009-09-11 16:11:50.000000000 +0200 +*************** +*** 3055,3072 **** + int vcol; + { + /* try to advance to the specified column */ +- int col = 0; + int count = 0; + char_u *ptr; + +! ptr = ml_get_buf(wp->w_buffer, lnum, FALSE); + while (count <= vcol && *ptr != NUL) + { +- ++col; + count += win_lbr_chartabsize(wp, ptr, count, NULL); + mb_ptr_adv(ptr); + } +! return col; + } + #endif + +--- 3055,3071 ---- + int vcol; + { + /* try to advance to the specified column */ + int count = 0; + char_u *ptr; ++ char_u *start; + +! start = ptr = ml_get_buf(wp->w_buffer, lnum, FALSE); + while (count <= vcol && *ptr != NUL) + { + count += win_lbr_chartabsize(wp, ptr, count, NULL); + mb_ptr_adv(ptr); + } +! return (int)(ptr - start); + } + #endif + +*** ../vim-7.2.257/src/version.c 2009-09-11 16:17:36.000000000 +0200 +--- src/version.c 2009-09-11 16:45:48.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 258, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +232. You start conversations with, "Have you gotten an ISDN line?" + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.259 b/source/ap/vim/patches/7.2.259 new file mode 100644 index 000000000..0bf0ba133 --- /dev/null +++ b/source/ap/vim/patches/7.2.259 @@ -0,0 +1,160 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.259 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.259 +Problem: exists() doesn't work properly for an empty aucmd group. +Solution: Change how au_exists() handles a missing pattern. Also add a + test for this. (Bob Hiestand) +Files: src/fileio.c, src/testdir/Makefile, src/testdir/test67.in, + src/testdir/test67.ok + + +*** ../vim-7.2.258/src/fileio.c 2009-09-11 15:04:13.000000000 +0200 +--- src/fileio.c 2009-09-11 16:37:08.000000000 +0200 +*************** +*** 9498,9512 **** + ap = first_autopat[(int)event]; + if (ap == NULL) + goto theend; +- if (pattern == NULL) +- { +- retval = TRUE; +- goto theend; +- } + + /* if pattern is "<buffer>", special handling is needed which uses curbuf */ + /* for pattern "<buffer=N>, fnamecmp() will work fine */ +! if (STRICMP(pattern, "<buffer>") == 0) + buflocal_buf = curbuf; + + /* Check if there is an autocommand with the given pattern. */ +--- 9498,9507 ---- + ap = first_autopat[(int)event]; + if (ap == NULL) + goto theend; + + /* if pattern is "<buffer>", special handling is needed which uses curbuf */ + /* for pattern "<buffer=N>, fnamecmp() will work fine */ +! if (pattern != NULL && STRICMP(pattern, "<buffer>") == 0) + buflocal_buf = curbuf; + + /* Check if there is an autocommand with the given pattern. */ +*************** +*** 9515,9523 **** + /* For buffer-local autocommands, fnamecmp() works fine. */ + if (ap->pat != NULL && ap->cmds != NULL + && (group == AUGROUP_ALL || ap->group == group) +! && (buflocal_buf == NULL +! ? fnamecmp(ap->pat, pattern) == 0 +! : ap->buflocal_nr == buflocal_buf->b_fnum)) + { + retval = TRUE; + break; +--- 9510,9519 ---- + /* For buffer-local autocommands, fnamecmp() works fine. */ + if (ap->pat != NULL && ap->cmds != NULL + && (group == AUGROUP_ALL || ap->group == group) +! && (pattern == NULL +! || (buflocal_buf == NULL +! ? fnamecmp(ap->pat, pattern) == 0 +! : ap->buflocal_nr == buflocal_buf->b_fnum))) + { + retval = TRUE; + break; +*** ../vim-7.2.258/src/testdir/Makefile 2009-06-24 18:07:55.000000000 +0200 +--- src/testdir/Makefile 2009-09-11 16:31:33.000000000 +0200 +*************** +*** 22,28 **** + test48.out test49.out test51.out test52.out test53.out \ + test54.out test55.out test56.out test57.out test58.out \ + test59.out test60.out test61.out test62.out test63.out \ +! test64.out test65.out test66.out + + SCRIPTS_GUI = test16.out + +--- 22,28 ---- + test48.out test49.out test51.out test52.out test53.out \ + test54.out test55.out test56.out test57.out test58.out \ + test59.out test60.out test61.out test62.out test63.out \ +! test64.out test65.out test66.out test67.out + + SCRIPTS_GUI = test16.out + +*** ../vim-7.2.258/src/testdir/test67.in 2009-09-11 17:23:47.000000000 +0200 +--- src/testdir/test67.in 2009-09-11 16:43:11.000000000 +0200 +*************** +*** 0 **** +--- 1,33 ---- ++ Test that groups and patterns are tested correctly when calling exists() for ++ autocommands. ++ ++ STARTTEST ++ :so small.vim ++ :let results=[] ++ :augroup auexists ++ :augroup END ++ :call add(results, "##BufEnter: " . exists("##BufEnter")) ++ :call add(results, "#BufEnter: " . exists("#BufEnter")) ++ :au BufEnter * let g:entered=1 ++ :call add(results, "#BufEnter: " . exists("#BufEnter")) ++ :call add(results, "#auexists#BufEnter: " . exists("#auexists#BufEnter")) ++ :augroup auexists ++ :au BufEnter * let g:entered=1 ++ :augroup END ++ :call add(results, "#auexists#BufEnter: " . exists("#auexists#BufEnter")) ++ :call add(results, "#BufEnter#*.test: " . exists("#BufEnter#*.test")) ++ :au BufEnter *.test let g:entered=1 ++ :call add(results, "#BufEnter#*.test: " . exists("#BufEnter#*.test")) ++ :edit testfile.test ++ :call add(results, "#BufEnter#<buffer>: " . exists("#BufEnter#<buffer>")) ++ :au BufEnter <buffer> let g:entered=1 ++ :call add(results, "#BufEnter#<buffer>: " . exists("#BufEnter#<buffer>")) ++ :edit testfile2.test ++ :call add(results, "#BufEnter#<buffer>: " . exists("#BufEnter#<buffer>")) ++ :e test.out ++ :call append(0, results) ++ :$d ++ :w ++ :qa! ++ ENDTEST ++ +*** ../vim-7.2.258/src/testdir/test67.ok 2009-09-11 17:23:47.000000000 +0200 +--- src/testdir/test67.ok 2009-09-11 16:43:15.000000000 +0200 +*************** +*** 0 **** +--- 1,10 ---- ++ ##BufEnter: 1 ++ #BufEnter: 0 ++ #BufEnter: 1 ++ #auexists#BufEnter: 0 ++ #auexists#BufEnter: 1 ++ #BufEnter#*.test: 0 ++ #BufEnter#*.test: 1 ++ #BufEnter#<buffer>: 0 ++ #BufEnter#<buffer>: 1 ++ #BufEnter#<buffer>: 0 +*** ../vim-7.2.258/src/version.c 2009-09-11 16:48:06.000000000 +0200 +--- src/version.c 2009-09-11 17:23:14.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 259, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +234. You started college as a chemistry major, and walk out four years + later as an Internet provider. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.260 b/source/ap/vim/patches/7.2.260 new file mode 100644 index 000000000..46d4365c2 --- /dev/null +++ b/source/ap/vim/patches/7.2.260 @@ -0,0 +1,155 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.260 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.260 (extra part of 7.2.259) +Problem: exists() doesn't work properly for empty aucmd group. +Solution: Change how au_exists() handles a missing pattern. Also add a + test for this. (Bob Hiestand) +Files: src/testdir/Make_amiga.mak, src/testdir/Make_dos.mak, + src/testdir/Make_ming.mak, src/testdir/Make_os2.mak, + src/testdir/Make_vms.mms + + +*** ../vim-7.2.259/src/testdir/Make_amiga.mak 2009-03-11 16:36:04.000000000 +0100 +--- src/testdir/Make_amiga.mak 2009-09-11 16:29:54.000000000 +0200 +*************** +*** 26,32 **** + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test58.out test59.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out + + .SUFFIXES: .in .out + +--- 26,32 ---- + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test58.out test59.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out + + .SUFFIXES: .in .out + +*************** +*** 112,114 **** +--- 112,115 ---- + test64.out: test64.in + test65.out: test65.in + test66.out: test66.in ++ test67.out: test67.in +*** ../vim-7.2.259/src/testdir/Make_dos.mak 2009-03-11 16:36:04.000000000 +0100 +--- src/testdir/Make_dos.mak 2009-09-11 16:30:17.000000000 +0200 +*************** +*** 26,32 **** + test15.out test17.out test18.out test21.out test26.out \ + test30.out test31.out test32.out test33.out test34.out \ + test37.out test38.out test39.out test40.out test41.out \ +! test42.out test52.out test65.out test66.out + + SCRIPTS32 = test50.out + +--- 26,32 ---- + test15.out test17.out test18.out test21.out test26.out \ + test30.out test31.out test32.out test33.out test34.out \ + test37.out test38.out test39.out test40.out test41.out \ +! test42.out test52.out test65.out test66.out test67.out + + SCRIPTS32 = test50.out + +*** ../vim-7.2.259/src/testdir/Make_ming.mak 2009-03-11 16:36:04.000000000 +0100 +--- src/testdir/Make_ming.mak 2009-09-11 16:30:37.000000000 +0200 +*************** +*** 45,51 **** + test15.out test17.out test18.out test21.out test26.out \ + test30.out test31.out test32.out test33.out test34.out \ + test37.out test38.out test39.out test40.out test41.out \ +! test42.out test52.out test65.out test66.out + + SCRIPTS32 = test50.out + +--- 45,51 ---- + test15.out test17.out test18.out test21.out test26.out \ + test30.out test31.out test32.out test33.out test34.out \ + test37.out test38.out test39.out test40.out test41.out \ +! test42.out test52.out test65.out test66.out test67.out + + SCRIPTS32 = test50.out + +*** ../vim-7.2.259/src/testdir/Make_os2.mak 2009-03-11 16:36:04.000000000 +0100 +--- src/testdir/Make_os2.mak 2009-09-11 16:30:52.000000000 +0200 +*************** +*** 26,32 **** + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test58.out test59.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out + + .SUFFIXES: .in .out + +--- 26,32 ---- + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test58.out test59.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out + + .SUFFIXES: .in .out + +*** ../vim-7.2.259/src/testdir/Make_vms.mms 2009-03-11 16:36:04.000000000 +0100 +--- src/testdir/Make_vms.mms 2009-09-11 16:31:06.000000000 +0200 +*************** +*** 4,10 **** + # Authors: Zoltan Arpadffy, <arpadffy@polarhome.com> + # Sandor Kopanyi, <sandor.kopanyi@mailbox.hu> + # +! # Last change: 2009 Mar 05 + # + # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64. + # Edit the lines in the Configuration section below to select. +--- 4,10 ---- + # Authors: Zoltan Arpadffy, <arpadffy@polarhome.com> + # Sandor Kopanyi, <sandor.kopanyi@mailbox.hu> + # +! # Last change: 2009 Sep 11 + # + # This has been tested on VMS 6.2 to 8.3 on DEC Alpha, VAX and IA64. + # Edit the lines in the Configuration section below to select. +*************** +*** 69,75 **** + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out + + .IFDEF WANT_GUI + SCRIPT_GUI = test16.out +--- 69,75 ---- + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out + + .IFDEF WANT_GUI + SCRIPT_GUI = test16.out +*** ../vim-7.2.259/src/version.c 2009-09-11 17:24:01.000000000 +0200 +--- src/version.c 2009-09-18 14:57:05.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 260, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +251. You've never seen your closest friends who usually live WAY too far away. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.261 b/source/ap/vim/patches/7.2.261 new file mode 100644 index 000000000..4f8e72d71 --- /dev/null +++ b/source/ap/vim/patches/7.2.261 @@ -0,0 +1,83 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.261 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.261 +Problem: When deleting lines with a specific folding configuration E38 may + appear. (Shahaf) +Solution: When adjusting nested folds for deleted lines take into account + that they don't start at the top of the enclosing fold. +Files: src/fold.c + + +*** ../vim-7.2.260/src/fold.c 2009-01-06 15:01:58.000000000 +0100 +--- src/fold.c 2009-09-18 14:43:23.000000000 +0200 +*************** +*** 1607,1617 **** + } + else + { +- /* 2, 3, or 5: need to correct nested folds too */ +- foldMarkAdjustRecurse(&fp->fd_nested, line1 - fp->fd_top, +- line2 - fp->fd_top, amount, amount_after); + if (fp->fd_top < top) + { + if (last <= line2) + { + /* 2. fold contains line1, line2 is below fold */ +--- 1607,1617 ---- + } + else + { + if (fp->fd_top < top) + { ++ /* 2 or 3: need to correct nested folds too */ ++ foldMarkAdjustRecurse(&fp->fd_nested, line1 - fp->fd_top, ++ line2 - fp->fd_top, amount, amount_after); + if (last <= line2) + { + /* 2. fold contains line1, line2 is below fold */ +*************** +*** 1628,1634 **** + } + else + { +! /* 5. fold is below line1 and contains line2 */ + if (amount == MAXLNUM) + { + fp->fd_len -= line2 - fp->fd_top + 1; +--- 1628,1638 ---- + } + else + { +! /* 5. fold is below line1 and contains line2; need to +! * correct nested folds too */ +! foldMarkAdjustRecurse(&fp->fd_nested, line1 - fp->fd_top, +! line2 - fp->fd_top, amount, +! amount_after + (fp->fd_top - top)); + if (amount == MAXLNUM) + { + fp->fd_len -= line2 - fp->fd_top + 1; +*** ../vim-7.2.260/src/version.c 2009-09-18 14:58:26.000000000 +0200 +--- src/version.c 2009-09-18 15:14:40.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 261, + /**/ + +-- +Emacs is a nice OS - but it lacks a good text editor. +That's why I am using Vim. --Anonymous + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.262 b/source/ap/vim/patches/7.2.262 new file mode 100644 index 000000000..dc73c07b8 --- /dev/null +++ b/source/ap/vim/patches/7.2.262 @@ -0,0 +1,189 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.262 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.262 +Problem: When using custom completion for a user command the pattern string + goes beyond the cursor position. (Hari Krishna Dara) +Solution: Truncate the string at the cursor position. +Files: src/ex_getln.c, src/structs.h + + +*** ../vim-7.2.261/src/ex_getln.c 2009-06-24 17:04:40.000000000 +0200 +--- src/ex_getln.c 2009-09-18 16:58:16.000000000 +0200 +*************** +*** 3266,3272 **** + int i, j; + char_u *p1; + char_u *p2; +- int oldlen; + int difflen; + int v; + +--- 3266,3271 ---- +*************** +*** 3291,3297 **** + out_flush(); + + i = (int)(xp->xp_pattern - ccline.cmdbuff); +! oldlen = ccline.cmdpos - i; + + if (type == WILD_NEXT || type == WILD_PREV) + { +--- 3290,3296 ---- + out_flush(); + + i = (int)(xp->xp_pattern - ccline.cmdbuff); +! xp->xp_pattern_len = ccline.cmdpos - i; + + if (type == WILD_NEXT || type == WILD_PREV) + { +*************** +*** 3305,3322 **** + /* + * Translate string into pattern and expand it. + */ +! if ((p1 = addstar(&ccline.cmdbuff[i], oldlen, xp->xp_context)) == NULL) + p2 = NULL; + else + { +! p2 = ExpandOne(xp, p1, vim_strnsave(&ccline.cmdbuff[i], oldlen), + WILD_HOME_REPLACE|WILD_ADD_SLASH|WILD_SILENT|WILD_ESCAPE + |options, type); + vim_free(p1); + /* longest match: make sure it is not shorter (happens with :help */ + if (p2 != NULL && type == WILD_LONGEST) + { +! for (j = 0; j < oldlen; ++j) + if (ccline.cmdbuff[i + j] == '*' + || ccline.cmdbuff[i + j] == '?') + break; +--- 3304,3323 ---- + /* + * Translate string into pattern and expand it. + */ +! if ((p1 = addstar(xp->xp_pattern, xp->xp_pattern_len, +! xp->xp_context)) == NULL) + p2 = NULL; + else + { +! p2 = ExpandOne(xp, p1, +! vim_strnsave(&ccline.cmdbuff[i], xp->xp_pattern_len), + WILD_HOME_REPLACE|WILD_ADD_SLASH|WILD_SILENT|WILD_ESCAPE + |options, type); + vim_free(p1); + /* longest match: make sure it is not shorter (happens with :help */ + if (p2 != NULL && type == WILD_LONGEST) + { +! for (j = 0; j < xp->xp_pattern_len; ++j) + if (ccline.cmdbuff[i + j] == '*' + || ccline.cmdbuff[i + j] == '?') + break; +*************** +*** 3331,3337 **** + + if (p2 != NULL && !got_int) + { +! difflen = (int)STRLEN(p2) - oldlen; + if (ccline.cmdlen + difflen > ccline.cmdbufflen - 4) + { + v = realloc_cmdbuff(ccline.cmdlen + difflen); +--- 3332,3338 ---- + + if (p2 != NULL && !got_int) + { +! difflen = (int)STRLEN(p2) - xp->xp_pattern_len; + if (ccline.cmdlen + difflen > ccline.cmdbufflen - 4) + { + v = realloc_cmdbuff(ccline.cmdlen + difflen); +*************** +*** 3620,3625 **** +--- 3621,3627 ---- + expand_T *xp; + { + xp->xp_pattern = NULL; ++ xp->xp_pattern_len = 0; + xp->xp_backslash = XP_BS_NONE; + #ifndef BACKSLASH_IN_FILENAME + xp->xp_shell = FALSE; +*************** +*** 4311,4318 **** + } + + /* add star to file name, or convert to regexp if not exp. files. */ +! file_str = addstar(xp->xp_pattern, +! (int)(str + col - xp->xp_pattern), xp->xp_context); + if (file_str == NULL) + return EXPAND_UNSUCCESSFUL; + +--- 4313,4320 ---- + } + + /* add star to file name, or convert to regexp if not exp. files. */ +! xp->xp_pattern_len = (int)(str + col - xp->xp_pattern); +! file_str = addstar(xp->xp_pattern, xp->xp_pattern_len, xp->xp_context); + if (file_str == NULL) + return EXPAND_UNSUCCESSFUL; + +*************** +*** 4781,4787 **** + sprintf((char *)num, "%d", ccline.cmdpos); + args[1] = ccline.cmdbuff; + } +! args[0] = xp->xp_pattern; + args[2] = num; + + /* Save the cmdline, we don't know what the function may do. */ +--- 4783,4789 ---- + sprintf((char *)num, "%d", ccline.cmdpos); + args[1] = ccline.cmdbuff; + } +! args[0] = vim_strnsave(xp->xp_pattern, xp->xp_pattern_len); + args[2] = num; + + /* Save the cmdline, we don't know what the function may do. */ +*************** +*** 4797,4802 **** +--- 4799,4805 ---- + if (ccline.cmdbuff != NULL) + ccline.cmdbuff[ccline.cmdlen] = keep; + ++ vim_free(args[0]); + return ret; + } + +*** ../vim-7.2.261/src/structs.h 2009-07-29 12:09:49.000000000 +0200 +--- src/structs.h 2009-09-18 15:33:15.000000000 +0200 +*************** +*** 432,437 **** +--- 432,438 ---- + { + int xp_context; /* type of expansion */ + char_u *xp_pattern; /* start of item to expand */ ++ int xp_pattern_len; /* bytes in xp_pattern before cursor */ + #if defined(FEAT_USR_CMDS) && defined(FEAT_EVAL) && defined(FEAT_CMDL_COMPL) + char_u *xp_arg; /* completion function */ + int xp_scriptID; /* SID for completion function */ +*** ../vim-7.2.261/src/version.c 2009-09-18 15:16:37.000000000 +0200 +--- src/version.c 2009-09-18 17:23:20.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 262, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +252. You vote for foreign officials. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.263 b/source/ap/vim/patches/7.2.263 new file mode 100644 index 000000000..fdbfa4064 --- /dev/null +++ b/source/ap/vim/patches/7.2.263 @@ -0,0 +1,87 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.263 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.263 +Problem: GTK2: when using the -geom argument with an offset from the right + edge and the size is smaller than the default, the Vim window is + not positioned properly. +Solution: Use another function to set the size. (Vitaly Minko) +Files: src/gui_gtk_x11.c + + +*** ../vim-7.2.262/src/gui_gtk_x11.c 2009-09-11 15:46:20.000000000 +0200 +--- src/gui_gtk_x11.c 2009-09-23 15:43:52.000000000 +0200 +*************** +*** 4066,4071 **** +--- 4066,4073 ---- + { + guicolor_T fg_pixel = INVALCOLOR; + guicolor_T bg_pixel = INVALCOLOR; ++ guint pixel_width; ++ guint pixel_height; + + #ifdef HAVE_GTK2 + /* +*************** +*** 4106,4113 **** + unsigned int w, h; + int x = 0; + int y = 0; +- guint pixel_width; +- guint pixel_height; + + mask = XParseGeometry((char *)gui.geom, &x, &y, &w, &h); + +--- 4108,4113 ---- +*************** +*** 4160,4168 **** + } + } + +! gtk_form_set_size(GTK_FORM(gui.formwin), +! (guint)(gui_get_base_width() + Columns * gui.char_width), +! (guint)(gui_get_base_height() + Rows * gui.char_height)); + update_window_manager_hints(0, 0); + + if (foreground_argument != NULL) +--- 4160,4175 ---- + } + } + +! pixel_width = (guint)(gui_get_base_width() + Columns * gui.char_width); +! pixel_height = (guint)(gui_get_base_height() + Rows * gui.char_height); +! #ifdef HAVE_GTK2 +! /* For GTK2 changing the size of the form widget doesn't cause window +! * resizing. */ +! if (gtk_socket_id == 0) +! gtk_window_resize(GTK_WINDOW(gui.mainwin), pixel_width, pixel_height); +! #else +! gtk_form_set_size(GTK_FORM(gui.formwin), pixel_width, pixel_height); +! #endif + update_window_manager_hints(0, 0); + + if (foreground_argument != NULL) +*** ../vim-7.2.262/src/version.c 2009-09-18 17:24:54.000000000 +0200 +--- src/version.c 2009-09-23 17:34:08.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 263, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +267. You get an extra phone line so you can get phone calls. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.264 b/source/ap/vim/patches/7.2.264 new file mode 100644 index 000000000..808f29169 --- /dev/null +++ b/source/ap/vim/patches/7.2.264 @@ -0,0 +1,168 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.264 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.264 +Problem: GTK2: When the Vim window is maximized setting 'columns' or + 'lines' doesn't work. +Solution: Unmaximize the window before setting the size. (Vitaly Minko) +Files: src/gui.c, src/gui_gtk_x11.c, src/proto/gui_gtk_x11.pro + + +*** ../vim-7.2.263/src/gui.c 2009-07-29 11:10:31.000000000 +0200 +--- src/gui.c 2009-09-23 16:28:09.000000000 +0200 +*************** +*** 1386,1391 **** +--- 1386,1395 ---- + int min_height; + int screen_w; + int screen_h; ++ #ifdef HAVE_GTK2 ++ int un_maximize = mustset; ++ int did_adjust = 0; ++ #endif + + if (!gui.shell_created) + return; +*************** +*** 1425,1446 **** + if (Columns < MIN_COLUMNS) + Columns = MIN_COLUMNS; + width = Columns * gui.char_width + base_width; + } + if ((direction & RESIZE_VERT) && height > screen_h) + { + Rows = (screen_h - base_height) / gui.char_height; + check_shellsize(); + height = Rows * gui.char_height + base_height; + } + } + gui.num_cols = Columns; + gui.num_rows = Rows; + + min_width = base_width + MIN_COLUMNS * gui.char_width; + min_height = base_height + MIN_LINES * gui.char_height; +! # ifdef FEAT_WINDOWS + min_height += tabline_height() * gui.char_height; +! # endif + + gui_mch_set_shellsize(width, height, min_width, min_height, + base_width, base_height, direction); +--- 1429,1475 ---- + if (Columns < MIN_COLUMNS) + Columns = MIN_COLUMNS; + width = Columns * gui.char_width + base_width; ++ #ifdef HAVE_GTK2 ++ ++did_adjust; ++ #endif + } + if ((direction & RESIZE_VERT) && height > screen_h) + { + Rows = (screen_h - base_height) / gui.char_height; + check_shellsize(); + height = Rows * gui.char_height + base_height; ++ #ifdef HAVE_GTK2 ++ ++did_adjust; ++ #endif + } ++ #ifdef HAVE_GTK2 ++ if (did_adjust == 2 || (width + gui.char_width >= screen_w ++ && height + gui.char_height >= screen_h)) ++ /* don't unmaximize if at maximum size */ ++ un_maximize = FALSE; ++ #endif + } + gui.num_cols = Columns; + gui.num_rows = Rows; + + min_width = base_width + MIN_COLUMNS * gui.char_width; + min_height = base_height + MIN_LINES * gui.char_height; +! #ifdef FEAT_WINDOWS + min_height += tabline_height() * gui.char_height; +! #endif +! +! #ifdef HAVE_GTK2 +! if (un_maximize) +! { +! /* If the window size is smaller than the screen unmaximize the +! * window, otherwise resizing won't work. */ +! gui_mch_get_screen_dimensions(&screen_w, &screen_h); +! if ((width + gui.char_width < screen_w +! || height + gui.char_height * 2 < screen_h) +! && gui_mch_maximized()) +! gui_mch_unmaximize(); +! } +! #endif + + gui_mch_set_shellsize(width, height, min_width, min_height, + base_width, base_height, direction); +*** ../vim-7.2.263/src/gui_gtk_x11.c 2009-09-23 17:35:17.000000000 +0200 +--- src/gui_gtk_x11.c 2009-09-23 15:43:52.000000000 +0200 +*************** +*** 4376,4381 **** +--- 4376,4404 ---- + #endif + #endif /* HAVE_GTK2 */ + ++ #if defined(HAVE_GTK2) || defined(PROTO) ++ /* ++ * Return TRUE if the main window is maximized. ++ */ ++ int ++ gui_mch_maximized() ++ { ++ return (gui.mainwin != NULL && gui.mainwin->window != NULL ++ && (gdk_window_get_state(gui.mainwin->window) ++ & GDK_WINDOW_STATE_MAXIMIZED)); ++ } ++ ++ /* ++ * Unmaximize the main window ++ */ ++ void ++ gui_mch_unmaximize() ++ { ++ if (gui.mainwin != NULL) ++ gtk_window_unmaximize(GTK_WINDOW(gui.mainwin)); ++ } ++ #endif ++ + /* + * Set the windows size. + */ +*** ../vim-7.2.263/src/proto/gui_gtk_x11.pro 2007-05-05 19:18:54.000000000 +0200 +--- src/proto/gui_gtk_x11.pro 2009-09-23 15:43:45.000000000 +0200 +*************** +*** 16,21 **** +--- 16,23 ---- + void gui_mch_exit __ARGS((int rc)); + int gui_mch_get_winpos __ARGS((int *x, int *y)); + void gui_mch_set_winpos __ARGS((int x, int y)); ++ int gui_mch_maximized __ARGS((void)); ++ void gui_mch_unmaximize __ARGS((void)); + void gui_mch_set_shellsize __ARGS((int width, int height, int min_width, int min_height, int base_width, int base_height, int direction)); + void gui_mch_get_screen_dimensions __ARGS((int *screen_w, int *screen_h)); + void gui_mch_settitle __ARGS((char_u *title, char_u *icon)); +*** ../vim-7.2.263/src/version.c 2009-09-23 17:35:17.000000000 +0200 +--- src/version.c 2009-09-23 18:12:21.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 264, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +268. You get up in the morning and go online before getting your coffee. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.265 b/source/ap/vim/patches/7.2.265 new file mode 100644 index 000000000..468515024 --- /dev/null +++ b/source/ap/vim/patches/7.2.265 @@ -0,0 +1,56 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.265 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.265 +Problem: When using ":silent broken" inside try/catch silency may persist. + (dr-dr xp) +Solution: Set msg_silent when there is an error and it's bigger than the + saved value. +Files: src/ex_docmd.c + + +*** ../vim-7.2.264/src/ex_docmd.c 2009-07-09 20:13:59.000000000 +0200 +--- src/ex_docmd.c 2009-09-30 11:40:53.000000000 +0200 +*************** +*** 2695,2701 **** + { + /* messages could be enabled for a serious error, need to check if the + * counters don't become negative */ +! if (!did_emsg) + msg_silent = save_msg_silent; + emsg_silent -= did_esilent; + if (emsg_silent < 0) +--- 2695,2701 ---- + { + /* messages could be enabled for a serious error, need to check if the + * counters don't become negative */ +! if (!did_emsg || msg_silent > save_msg_silent) + msg_silent = save_msg_silent; + emsg_silent -= did_esilent; + if (emsg_silent < 0) +*** ../vim-7.2.264/src/version.c 2009-09-23 18:14:13.000000000 +0200 +--- src/version.c 2009-09-30 13:22:47.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 265, + /**/ + +-- +FIRST HEAD: Oh! quick! get the sword out I want to cut his head off. +THIRD HEAD: Oh, cut your own head off. +SECOND HEAD: Yes - do us all a favour. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.266 b/source/ap/vim/patches/7.2.266 new file mode 100644 index 000000000..3a5ba7741 --- /dev/null +++ b/source/ap/vim/patches/7.2.266 @@ -0,0 +1,244 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.266 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.266 +Problem: When an expression abbreviation is triggered, the typed character + is unknown. +Solution: Make the typed character available in v:char. +Files: runtime/doc/map.txt, src/eval.c, src/getchar.c, src/ops.c, + src/proto/eval.pro + + +*** ../vim-7.2.265/runtime/doc/map.txt 2008-08-09 19:36:49.000000000 +0200 +--- runtime/doc/map.txt 2009-09-23 19:39:19.000000000 +0200 +*************** +*** 224,229 **** +--- 224,233 ---- + The result of the InsertDot() function will be inserted. It could check the + text before the cursor and start omni completion when some condition is met. + ++ For abbreviations |v:char| is set to the character that was typed to trigger ++ the abbreviation. You can use this to decide how to expand the {lhs}. You ++ can't change v:char and you should not insert it. ++ + Be very careful about side effects! The expression is evaluated while + obtaining characters, you may very well make the command dysfunctional. + For this reason the following is blocked: +*** ../vim-7.2.265/src/eval.c 2009-06-03 14:25:47.000000000 +0200 +--- src/eval.c 2009-09-23 19:36:32.000000000 +0200 +*************** +*** 18101,18106 **** +--- 18101,18131 ---- + } + + /* ++ * Set v:char to character "c". ++ */ ++ void ++ set_vim_var_char(c) ++ int c; ++ { ++ #ifdef FEAT_MBYTE ++ char_u buf[MB_MAXBYTES]; ++ #else ++ char_u buf[2]; ++ #endif ++ ++ #ifdef FEAT_MBYTE ++ if (has_mbyte) ++ buf[(*mb_char2bytes)(c, buf)] = NUL; ++ else ++ #endif ++ { ++ buf[0] = c; ++ buf[1] = NUL; ++ } ++ set_vim_var_string(VV_CHAR, buf, -1); ++ } ++ ++ /* + * Set v:count to "count" and v:count1 to "count1". + * When "set_prevcount" is TRUE first set v:prevcount from v:count. + */ +*** ../vim-7.2.265/src/getchar.c 2009-07-14 13:44:43.000000000 +0200 +--- src/getchar.c 2009-09-23 19:35:54.000000000 +0200 +*************** +*** 129,135 **** + static void validate_maphash __ARGS((void)); + static void showmap __ARGS((mapblock_T *mp, int local)); + #ifdef FEAT_EVAL +! static char_u *eval_map_expr __ARGS((char_u *str)); + #endif + + /* +--- 129,135 ---- + static void validate_maphash __ARGS((void)); + static void showmap __ARGS((mapblock_T *mp, int local)); + #ifdef FEAT_EVAL +! static char_u *eval_map_expr __ARGS((char_u *str, int c)); + #endif + + /* +*************** +*** 2446,2452 **** + if (tabuf.typebuf_valid) + { + vgetc_busy = 0; +! s = eval_map_expr(mp->m_str); + vgetc_busy = save_vgetc_busy; + } + else +--- 2446,2452 ---- + if (tabuf.typebuf_valid) + { + vgetc_busy = 0; +! s = eval_map_expr(mp->m_str, NUL); + vgetc_busy = save_vgetc_busy; + } + else +*************** +*** 4367,4375 **** + * abbreviation, but is not inserted into the input stream. + */ + j = 0; +- /* special key code, split up */ + if (c != Ctrl_RSB) + { + if (IS_SPECIAL(c) || c == K_SPECIAL) + { + tb[j++] = K_SPECIAL; +--- 4367,4375 ---- + * abbreviation, but is not inserted into the input stream. + */ + j = 0; + if (c != Ctrl_RSB) + { ++ /* special key code, split up */ + if (IS_SPECIAL(c) || c == K_SPECIAL) + { + tb[j++] = K_SPECIAL; +*************** +*** 4398,4404 **** + } + #ifdef FEAT_EVAL + if (mp->m_expr) +! s = eval_map_expr(mp->m_str); + else + #endif + s = mp->m_str; +--- 4398,4404 ---- + } + #ifdef FEAT_EVAL + if (mp->m_expr) +! s = eval_map_expr(mp->m_str, c); + else + #endif + s = mp->m_str; +*************** +*** 4434,4441 **** + * special characters. + */ + static char_u * +! eval_map_expr(str) + char_u *str; + { + char_u *res; + char_u *p; +--- 4434,4442 ---- + * special characters. + */ + static char_u * +! eval_map_expr(str, c) + char_u *str; ++ int c; /* NUL or typed character for abbreviation */ + { + char_u *res; + char_u *p; +*************** +*** 4452,4457 **** +--- 4453,4459 ---- + #ifdef FEAT_EX_EXTRA + ++ex_normal_lock; + #endif ++ set_vim_var_char(c); /* set v:char to the typed character */ + save_cursor = curwin->w_cursor; + p = eval_to_string(str, NULL, FALSE); + --textlock; +*** ../vim-7.2.265/src/ops.c 2009-07-01 18:04:30.000000000 +0200 +--- src/ops.c 2009-09-23 19:11:40.000000000 +0200 +*************** +*** 4473,4483 **** + int use_sandbox = was_set_insecurely((char_u *)"formatexpr", + OPT_LOCAL); + int r; +- #ifdef FEAT_MBYTE +- char_u buf[MB_MAXBYTES]; +- #else +- char_u buf[2]; +- #endif + + /* + * Set v:lnum to the first line number and v:count to the number of lines. +--- 4473,4478 ---- +*************** +*** 4485,4501 **** + */ + set_vim_var_nr(VV_LNUM, lnum); + set_vim_var_nr(VV_COUNT, count); +! +! #ifdef FEAT_MBYTE +! if (has_mbyte) +! buf[(*mb_char2bytes)(c, buf)] = NUL; +! else +! #endif +! { +! buf[0] = c; +! buf[1] = NUL; +! } +! set_vim_var_string(VV_CHAR, buf, -1); + + /* + * Evaluate the function. +--- 4480,4486 ---- + */ + set_vim_var_nr(VV_LNUM, lnum); + set_vim_var_nr(VV_COUNT, count); +! set_vim_var_char(c); + + /* + * Evaluate the function. +*** ../vim-7.2.265/src/proto/eval.pro 2008-11-20 16:11:03.000000000 +0100 +--- src/proto/eval.pro 2009-09-23 19:36:30.000000000 +0200 +*************** +*** 61,66 **** +--- 61,67 ---- + long get_vim_var_nr __ARGS((int idx)); + char_u *get_vim_var_str __ARGS((int idx)); + list_T *get_vim_var_list __ARGS((int idx)); ++ void set_vim_var_char __ARGS((int c)); + void set_vcount __ARGS((long count, long count1, int set_prevcount)); + void set_vim_var_string __ARGS((int idx, char_u *val, int len)); + void set_vim_var_list __ARGS((int idx, list_T *val)); +*** ../vim-7.2.265/src/version.c 2009-09-30 13:23:57.000000000 +0200 +--- src/version.c 2009-09-30 15:11:29.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 266, + /**/ + +-- +Life would be so much easier if we could just look at the source code. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.267 b/source/ap/vim/patches/7.2.267 new file mode 100644 index 000000000..6df92c945 --- /dev/null +++ b/source/ap/vim/patches/7.2.267 @@ -0,0 +1,47 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.267 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.267 +Problem: Crash for narrow window and double-width character. +Solution: Check for zero width. (Taro Muraoka) +Files: src/charset.c + + +*** ../vim-7.2.266/src/charset.c 2009-09-11 14:02:25.000000000 +0200 +--- src/charset.c 2009-10-07 16:17:27.000000000 +0200 +*************** +*** 1218,1223 **** +--- 1218,1225 ---- + if ((int)vcol == width1 - 1) + return TRUE; + width2 = width1 + win_col_off2(wp); ++ if (width2 <= 0) ++ return FALSE; + return ((vcol - width1) % width2 == width2 - 1); + } + #endif /* FEAT_MBYTE */ +*** ../vim-7.2.266/src/version.c 2009-09-30 15:15:33.000000000 +0200 +--- src/version.c 2009-10-07 16:19:05.000000000 +0200 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 267, + /**/ + +-- +You got to work at a mill? Lucky! I got sent back to work in the +acid-mines for my daily crust of stale bread... which not even the +birds would eat. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.268 b/source/ap/vim/patches/7.2.268 new file mode 100644 index 000000000..89c50b04b --- /dev/null +++ b/source/ap/vim/patches/7.2.268 @@ -0,0 +1,80 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.268 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.268 +Problem: Crash when using Python to set cursor beyond end of line. + (winterTTr) +Solution: Check the column to be valid. +Files: src/if_python.c + + +*** ../vim-7.2.267/src/if_python.c 2009-07-09 20:06:30.000000000 +0200 +--- src/if_python.c 2009-10-10 14:49:10.000000000 +0200 +*************** +*** 2058,2063 **** +--- 2058,2064 ---- + { + long lnum; + long col; ++ long len; + + if (!PyArg_Parse(val, "(ll)", &lnum, &col)) + return -1; +*************** +*** 2072,2081 **** + if (VimErrorCheck()) + return -1; + +! /* NO CHECK ON COLUMN - SEEMS NOT TO MATTER */ + + this->win->w_cursor.lnum = lnum; + this->win->w_cursor.col = col; + update_screen(VALID); + + return 0; +--- 2073,2088 ---- + if (VimErrorCheck()) + return -1; + +! /* When column is out of range silently correct it. */ +! len = STRLEN(ml_get_buf(this->win->w_buffer, lnum, FALSE)); +! if (col > len) +! col = len; + + this->win->w_cursor.lnum = lnum; + this->win->w_cursor.col = col; ++ #ifdef FEAT_VIRTUALEDIT ++ this->win->w_cursor.coladd = 0; ++ #endif + update_screen(VALID); + + return 0; +*** ../vim-7.2.267/src/version.c 2009-10-07 16:19:52.000000000 +0200 +--- src/version.c 2009-11-03 11:42:08.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 268, + /**/ + +-- +VOICE OVER: As the horrendous Black Beast lunged forward, escape for Arthur + and his knights seemed hopeless, when, suddenly ... the animator + suffered a fatal heart attack. +ANIMATOR: Aaaaagh! +VOICE OVER: The cartoon peril was no more ... The Quest for Holy Grail could + continue. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.269 b/source/ap/vim/patches/7.2.269 new file mode 100644 index 000000000..ec15f454f --- /dev/null +++ b/source/ap/vim/patches/7.2.269 @@ -0,0 +1,261 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.269 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.269 +Problem: Many people struggle to find out why Vim startup is slow. +Solution: Add the --startuptime command line flag. +Files: runtime/doc/starting.txt, src/globals.h, src/feature.h, + src/main.c, src/macros.h + + +*** ../vim-7.2.268/runtime/doc/starting.txt 2008-11-09 13:43:25.000000000 +0100 +--- runtime/doc/starting.txt 2009-10-25 11:57:51.000000000 +0100 +*************** +*** 144,149 **** +--- 144,156 ---- + -u NORC no yes + --noplugin yes no + ++ --startuptime={fname} *--startuptime* ++ During startup write timing messages to the file {fname}. ++ This can be used to find out where time is spent while loading ++ your .vimrc and plugins. ++ When {fname} already exists new messages are appended. ++ {only when compiled with this feature} ++ + *--literal* + --literal Take file names literally, don't expand wildcards. Not needed + for Unix, because Vim always takes file names literally (the +*************** +*** 471,476 **** +--- 487,493 ---- + window title and copy/paste using the X clipboard. This + avoids a long startup time when running Vim in a terminal + emulator and the connection to the X server is slow. ++ See |--startuptime| to find out if affects you. + Only makes a difference on Unix or VMS, when compiled with the + |+X11| feature. Otherwise it's ignored. + To disable the connection only for specific terminals, see the +*** ../vim-7.2.268/src/globals.h 2009-07-29 12:09:49.000000000 +0200 +--- src/globals.h 2009-10-10 15:14:31.000000000 +0200 +*************** +*** 1567,1572 **** +--- 1567,1576 ---- + /* For undo we need to know the lowest time possible. */ + EXTERN time_t starttime; + ++ #ifdef STARTUPTIME ++ EXTERN FILE *time_fd INIT(= NULL); /* where to write startup timing */ ++ #endif ++ + /* + * Some compilers warn for not using a return value, but in some situations we + * can't do anything useful with the value. Assign to this variable to avoid +*** ../vim-7.2.268/src/feature.h 2008-11-09 13:43:25.000000000 +0100 +--- src/feature.h 2009-10-10 16:16:19.000000000 +0200 +*************** +*** 844,853 **** + /* #define DEBUG */ + + /* +! * STARTUPTIME Time the startup process. Writes a "vimstartup" file +! * with timestamps. + */ +! /* #define STARTUPTIME "vimstartup" */ + + /* + * MEM_PROFILE Debugging of memory allocation and freeing. +--- 844,857 ---- + /* #define DEBUG */ + + /* +! * STARTUPTIME Time the startup process. Writes a file with +! * timestamps. + */ +! #if defined(FEAT_NORMAL) \ +! && ((defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)) \ +! || defined(WIN3264)) +! # define STARTUPTIME 1 +! #endif + + /* + * MEM_PROFILE Debugging of memory allocation and freeing. +*** ../vim-7.2.268/src/main.c 2009-05-26 22:58:43.000000000 +0200 +--- src/main.c 2009-10-10 16:18:32.000000000 +0200 +*************** +*** 130,139 **** + #endif + + +- #ifdef STARTUPTIME +- static FILE *time_fd = NULL; +- #endif +- + /* + * Different types of error messages. + */ +--- 130,135 ---- +*************** +*** 173,178 **** +--- 169,177 ---- + char_u *fname = NULL; /* file name from command line */ + mparm_T params; /* various parameters passed between + * main() and other functions. */ ++ #ifdef STARTUPTIME ++ int i; ++ #endif + + /* + * Do any system-specific initialisations. These can NOT use IObuff or +*************** +*** 203,210 **** + #endif + + #ifdef STARTUPTIME +! time_fd = mch_fopen(STARTUPTIME, "a"); +! TIME_MSG("--- VIM STARTING ---"); + #endif + starttime = time(NULL); + +--- 202,216 ---- + #endif + + #ifdef STARTUPTIME +! for (i = 1; i < argc; ++i) +! { +! if (STRNICMP(argv[i], "--startuptime=", 14) == 0) +! { +! time_fd = mch_fopen(argv[i] + 14, "a"); +! TIME_MSG("--- VIM STARTING ---"); +! break; +! } +! } + #endif + starttime = time(NULL); + +*************** +*** 1150,1155 **** +--- 1156,1173 ---- + cursor_on(); + + do_redraw = FALSE; ++ ++ #ifdef STARTUPTIME ++ /* Now that we have drawn the first screen all the startup stuff ++ * has been done, close any file for startup messages. */ ++ if (time_fd != NULL) ++ { ++ TIME_MSG("first screen update"); ++ TIME_MSG("--- VIM STARTED ---"); ++ fclose(time_fd); ++ time_fd = NULL; ++ } ++ #endif + } + #ifdef FEAT_GUI + if (need_mouse_correct) +*************** +*** 1743,1748 **** +--- 1761,1770 ---- + /* already processed, skip */ + } + #endif ++ else if (STRNICMP(argv[0] + argv_idx, "startuptime", 11) == 0) ++ { ++ /* already processed, skip */ ++ } + else + { + if (argv[0][argv_idx]) +*************** +*** 3211,3216 **** +--- 3233,3252 ---- + + static struct timeval prev_timeval; + ++ # ifdef WIN3264 ++ /* ++ * Windows doesn't have gettimeofday(), although it does have struct timeval. ++ */ ++ static int ++ gettimeofday(struct timeval *tv, char *dummy) ++ { ++ long t = clock(); ++ tv->tv_sec = t / CLOCKS_PER_SEC; ++ tv->tv_usec = (t - tv->tv_sec * CLOCKS_PER_SEC) * 1000000 / CLOCKS_PER_SEC; ++ return 0; ++ } ++ # endif ++ + /* + * Save the previous time before doing something that could nest. + * set "*tv_rel" to the time elapsed so far. +*************** +*** 3299,3318 **** + } + } + +- # ifdef WIN3264 +- /* +- * Windows doesn't have gettimeofday(), although it does have struct timeval. +- */ +- int +- gettimeofday(struct timeval *tv, char *dummy) +- { +- long t = clock(); +- tv->tv_sec = t / CLOCKS_PER_SEC; +- tv->tv_usec = (t - tv->tv_sec * CLOCKS_PER_SEC) * 1000000 / CLOCKS_PER_SEC; +- return 0; +- } +- # endif +- + #endif + + #if defined(FEAT_CLIENTSERVER) || defined(PROTO) +--- 3335,3340 ---- +*** ../vim-7.2.268/src/macros.h 2009-05-17 13:30:58.000000000 +0200 +--- src/macros.h 2009-10-10 15:19:07.000000000 +0200 +*************** +*** 243,249 **** + #endif + + #ifdef STARTUPTIME +! # define TIME_MSG(s) time_msg(s, NULL) + #else + # define TIME_MSG(s) + #endif +--- 243,249 ---- + #endif + + #ifdef STARTUPTIME +! # define TIME_MSG(s) { if (time_fd != NULL) time_msg(s, NULL); } + #else + # define TIME_MSG(s) + #endif +*** ../vim-7.2.268/src/version.c 2009-11-03 11:43:05.000000000 +0100 +--- src/version.c 2009-11-03 12:06:31.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 269, + /**/ + +-- +BEDEVERE: Look! It's the old man from scene 24 - what's he Doing here? +ARTHUR: He is the keeper of the Bridge. He asks each traveler five + questions ... +GALAHAD: Three questions. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.270 b/source/ap/vim/patches/7.2.270 new file mode 100644 index 000000000..7ad6458f2 --- /dev/null +++ b/source/ap/vim/patches/7.2.270 @@ -0,0 +1,72 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.270 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.270 +Problem: Using ":@c" when the c register contains a CR causes the rest to + be executed later. (Dexter Douglas) +Solution: Don't check for typeahead to start with ':', keep executing + commands until all added typeahead has been used. +Files: src/ex_docmd.c + + +*** ../vim-7.2.269/src/ex_docmd.c 2009-09-30 13:23:57.000000000 +0200 +--- src/ex_docmd.c 2009-10-28 12:06:54.000000000 +0100 +*************** +*** 8358,8363 **** +--- 8358,8364 ---- + exarg_T *eap; + { + int c; ++ int prev_len = typebuf.tb_len; + + curwin->w_cursor.lnum = eap->line2; + +*************** +*** 8383,8393 **** + + /* + * Execute from the typeahead buffer. +! * Originally this didn't check for the typeahead buffer to be empty, +! * thus could read more Ex commands from stdin. It's not clear why, +! * it is certainly unexpected. + */ +! while ((!stuff_empty() || typebuf.tb_len > 0) && vpeekc() == ':') + (void)do_cmdline(NULL, getexline, NULL, DOCMD_NOWAIT|DOCMD_VERBOSE); + + exec_from_reg = save_efr; +--- 8384,8393 ---- + + /* + * Execute from the typeahead buffer. +! * Continue until the stuff buffer is empty and all added characters +! * have been consumed. + */ +! while (!stuff_empty() || typebuf.tb_len > prev_len) + (void)do_cmdline(NULL, getexline, NULL, DOCMD_NOWAIT|DOCMD_VERBOSE); + + exec_from_reg = save_efr; +*** ../vim-7.2.269/src/version.c 2009-11-03 12:10:39.000000000 +0100 +--- src/version.c 2009-11-03 12:32:47.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 270, + /**/ + +-- +To the optimist, the glass is half full. +To the pessimist, the glass is half empty. +To the engineer, the glass is twice as big as it needs to be. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.271 b/source/ap/vim/patches/7.2.271 new file mode 100644 index 000000000..07427981a --- /dev/null +++ b/source/ap/vim/patches/7.2.271 @@ -0,0 +1,92 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.271 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.271 +Problem: Using freed memory in Motif GUI version when making a choice. +Solution: Free memory only after using it. (Dominique Pelle) +Files: src/gui_xmdlg.c + + +*** ../vim-7.2.270/src/gui_xmdlg.c 2009-05-21 23:25:38.000000000 +0200 +--- src/gui_xmdlg.c 2009-10-28 21:56:15.000000000 +0100 +*************** +*** 10,16 **** + /* + * (C) 2001,2005 by Marcin Dalecki <martin@dalecki.de> + * +! * Implementation of dialogue functions for the Motif GUI variant. + * + * Note about Lesstif: Apparently lesstif doesn't get the widget layout right, + * when using a dynamic scrollbar policy. +--- 10,16 ---- + /* + * (C) 2001,2005 by Marcin Dalecki <martin@dalecki.de> + * +! * Implementation of dialog functions for the Motif GUI variant. + * + * Note about Lesstif: Apparently lesstif doesn't get the widget layout right, + * when using a dynamic scrollbar policy. +*************** +*** 633,648 **** + data->sel[which] = XtNewString(sel); + else + { +- XtFree(data->sel[which]); + if (!strcmp(data->sel[which], sel)) + { + /* unselecting current selection */ + data->sel[which] = NULL; + if (w) + XmListDeselectItem(w, call_data->item); + } + else + data->sel[which] = XtNewString(sel); + } + XtFree(sel); + +--- 633,651 ---- + data->sel[which] = XtNewString(sel); + else + { + if (!strcmp(data->sel[which], sel)) + { + /* unselecting current selection */ ++ XtFree(data->sel[which]); + data->sel[which] = NULL; + if (w) + XmListDeselectItem(w, call_data->item); + } + else ++ { ++ XtFree(data->sel[which]); + data->sel[which] = XtNewString(sel); ++ } + } + XtFree(sel); + +*** ../vim-7.2.270/src/version.c 2009-11-03 12:38:50.000000000 +0100 +--- src/version.c 2009-11-03 12:48:26.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 271, + /**/ + +-- +ROBIN: (warily) And if you get a question wrong? +ARTHUR: You are cast into the Gorge of Eternal Peril. +ROBIN: Oh ... wacho! + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.272 b/source/ap/vim/patches/7.2.272 new file mode 100644 index 000000000..22bebbcc7 --- /dev/null +++ b/source/ap/vim/patches/7.2.272 @@ -0,0 +1,82 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.272 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.272 +Problem: "_.svz" is not recognized as a swap file. (David M. Besonen) +Solution: Accept .s[uvw][a-z] as a swap file name extension. +Files: src/memline.c + + +*** ../vim-7.2.271/src/memline.c 2009-04-22 15:56:27.000000000 +0200 +--- src/memline.c 2009-10-29 20:55:08.000000000 +0100 +*************** +*** 864,884 **** + recoverymode = TRUE; + called_from_main = (curbuf->b_ml.ml_mfp == NULL); + attr = hl_attr(HLF_E); +! /* +! * If the file name ends in ".sw?" we use it directly. +! * Otherwise a search is done to find the swap file(s). +! */ + fname = curbuf->b_fname; + if (fname == NULL) /* When there is no file name */ + fname = (char_u *)""; + len = (int)STRLEN(fname); + if (len >= 4 && + #if defined(VMS) || defined(RISCOS) +! STRNICMP(fname + len - 4, "_sw" , 3) + #else +! STRNICMP(fname + len - 4, ".sw" , 3) + #endif +! == 0) + { + directly = TRUE; + fname = vim_strsave(fname); /* make a copy for mf_open() */ +--- 864,887 ---- + recoverymode = TRUE; + called_from_main = (curbuf->b_ml.ml_mfp == NULL); + attr = hl_attr(HLF_E); +! +! /* +! * If the file name ends in ".s[uvw][a-z]" we assume this is the swap file. +! * Otherwise a search is done to find the swap file(s). +! */ + fname = curbuf->b_fname; + if (fname == NULL) /* When there is no file name */ + fname = (char_u *)""; + len = (int)STRLEN(fname); + if (len >= 4 && + #if defined(VMS) || defined(RISCOS) +! STRNICMP(fname + len - 4, "_s" , 2) + #else +! STRNICMP(fname + len - 4, ".s" , 2) + #endif +! == 0 +! && vim_strchr((char_u *)"UVWuvw", fname[len - 2]) != NULL +! && ASCII_ISALPHA(fname[len - 1])) + { + directly = TRUE; + fname = vim_strsave(fname); /* make a copy for mf_open() */ +*** ../vim-7.2.271/src/version.c 2009-11-03 12:53:44.000000000 +0100 +--- src/version.c 2009-11-03 13:02:51.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 272, + /**/ + +-- +Sorry, no fortune today. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.273 b/source/ap/vim/patches/7.2.273 new file mode 100644 index 000000000..ac00afaa7 --- /dev/null +++ b/source/ap/vim/patches/7.2.273 @@ -0,0 +1,130 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.273 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.273 +Problem: Crash with redir to unknown array. (Christian Brabandt) +Solution: Don't assign the redir result when there was an error. +Files: src/eval.c + + +*** ../vim-7.2.272/src/eval.c 2009-09-30 15:15:33.000000000 +0200 +--- src/eval.c 2009-11-03 12:05:07.000000000 +0100 +*************** +*** 988,1000 **** + int err; + typval_T tv; + +! /* Make sure a valid variable name is specified */ + if (!eval_isnamec1(*name)) + { + EMSG(_(e_invarg)); + return FAIL; + } + + redir_varname = vim_strsave(name); + if (redir_varname == NULL) + return FAIL; +--- 988,1001 ---- + int err; + typval_T tv; + +! /* Catch a bad name early. */ + if (!eval_isnamec1(*name)) + { + EMSG(_(e_invarg)); + return FAIL; + } + ++ /* Make a copy of the name, it is used in redir_lval until redir ends. */ + redir_varname = vim_strsave(name); + if (redir_varname == NULL) + return FAIL; +*************** +*** 1019,1024 **** +--- 1020,1026 ---- + EMSG(_(e_trailing)); + else + EMSG(_(e_invarg)); ++ redir_endp = NULL; /* don't store a value, only cleanup */ + var_redir_stop(); + return FAIL; + } +*************** +*** 1037,1042 **** +--- 1039,1045 ---- + did_emsg |= save_emsg; + if (err) + { ++ redir_endp = NULL; /* don't store a value, only cleanup */ + var_redir_stop(); + return FAIL; + } +*************** +*** 1085,1090 **** +--- 1088,1094 ---- + + /* + * Stop redirecting command output to a variable. ++ * Frees the allocated memory. + */ + void + var_redir_stop() +*************** +*** 1093,1106 **** + + if (redir_lval != NULL) + { +! /* Append the trailing NUL. */ +! ga_append(&redir_ga, NUL); + +! /* Assign the text to the variable. */ +! tv.v_type = VAR_STRING; +! tv.vval.v_string = redir_ga.ga_data; +! set_var_lval(redir_lval, redir_endp, &tv, FALSE, (char_u *)"."); +! vim_free(tv.vval.v_string); + + clear_lval(redir_lval); + vim_free(redir_lval); +--- 1097,1114 ---- + + if (redir_lval != NULL) + { +! /* If there was no error: assign the text to the variable. */ +! if (redir_endp != NULL) +! { +! ga_append(&redir_ga, NUL); /* Append the trailing NUL. */ +! tv.v_type = VAR_STRING; +! tv.vval.v_string = redir_ga.ga_data; +! set_var_lval(redir_lval, redir_endp, &tv, FALSE, (char_u *)"."); +! } + +! /* free the collected output */ +! vim_free(redir_ga.ga_data); +! redir_ga.ga_data = NULL; + + clear_lval(redir_lval); + vim_free(redir_lval); +*** ../vim-7.2.272/src/version.c 2009-11-03 13:06:03.000000000 +0100 +--- src/version.c 2009-11-03 14:24:06.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 273, + /**/ + +-- +Permission is granted to read this message out aloud on Kings Cross Road, +London, under the condition that the orator is properly dressed. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.274 b/source/ap/vim/patches/7.2.274 new file mode 100644 index 000000000..809cedcf6 --- /dev/null +++ b/source/ap/vim/patches/7.2.274 @@ -0,0 +1,130 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.274 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.274 +Problem: Syntax folding doesn't work properly when adding a comment. +Solution: Fix it and add a test. (Lech Lorens) +Files: src/fold.c, src/testdir/test45.in, src/testdir/test45.ok + + +*** ../vim-7.2.273/src/fold.c 2009-09-18 15:16:37.000000000 +0200 +--- src/fold.c 2009-11-03 12:36:37.000000000 +0100 +*************** +*** 2256,2261 **** +--- 2256,2295 ---- + } + } + ++ /* ++ * If folding is defined by the syntax, it is possible that a change in ++ * one line will cause all sub-folds of the current fold to change (e.g., ++ * closing a C-style comment can cause folds in the subsequent lines to ++ * appear). To take that into account we should adjust the value of "bot" ++ * to point to the end of the current fold: ++ */ ++ if (foldlevelSyntax == getlevel) ++ { ++ garray_T *gap = &wp->w_folds; ++ fold_T *fp = NULL; ++ int current_fdl = 0; ++ linenr_T fold_start_lnum = 0; ++ linenr_T lnum_rel = fline.lnum; ++ ++ while (current_fdl < fline.lvl) ++ { ++ if (!foldFind(gap, lnum_rel, &fp)) ++ break; ++ ++current_fdl; ++ ++ fold_start_lnum += fp->fd_top; ++ gap = &fp->fd_nested; ++ lnum_rel -= fp->fd_top; ++ } ++ if (fp != NULL && current_fdl == fline.lvl) ++ { ++ linenr_T fold_end_lnum = fold_start_lnum + fp->fd_len; ++ ++ if (fold_end_lnum > bot) ++ bot = fold_end_lnum; ++ } ++ } ++ + start = fline.lnum; + end = bot; + /* Do at least one line. */ +*** ../vim-7.2.273/src/testdir/test45.in 2007-09-25 17:58:43.000000000 +0200 +--- src/testdir/test45.in 2009-11-03 12:22:38.000000000 +0100 +*************** +*** 28,36 **** + k:call append("$", foldlevel(".")) + :" test syntax folding + :set fdm=syntax fdl=0 +! :syn region Hup start="dd" end="hh" fold + Gzk:call append("$", "folding " . getline(".")) + k:call append("$", getline(".")) + :" test expression folding + :fun Flvl() + let l = getline(v:lnum) +--- 28,41 ---- + k:call append("$", foldlevel(".")) + :" test syntax folding + :set fdm=syntax fdl=0 +! :syn region Hup start="dd" end="ii" fold contains=Fd1,Fd2,Fd3 +! :syn region Fd1 start="ee" end="ff" fold contained +! :syn region Fd2 start="gg" end="hh" fold contained +! :syn region Fd3 start="commentstart" end="commentend" fold contained + Gzk:call append("$", "folding " . getline(".")) + k:call append("$", getline(".")) ++ jAcommentstart Acommentend:set fdl=1 ++ 3j:call append("$", getline(".")) + :" test expression folding + :fun Flvl() + let l = getline(v:lnum) +*** ../vim-7.2.273/src/testdir/test45.ok 2004-06-13 17:47:37.000000000 +0200 +--- src/testdir/test45.ok 2009-11-03 12:22:50.000000000 +0100 +*************** +*** 8,15 **** + 0 + indent 2 + 1 +! folding 8 hh + 3 cc + expr 2 + 1 + 2 +--- 8,16 ---- + 0 + indent 2 + 1 +! folding 9 ii + 3 cc ++ 7 gg + expr 2 + 1 + 2 +*** ../vim-7.2.273/src/version.c 2009-11-03 14:26:29.000000000 +0100 +--- src/version.c 2009-11-03 14:44:21.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 274, + /**/ + +-- +BRIDGEKEEPER: What is your favorite colour? +LAUNCELOT: Blue. +BRIDGEKEEPER: Right. Off you go. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.275 b/source/ap/vim/patches/7.2.275 new file mode 100644 index 000000000..c6c632644 --- /dev/null +++ b/source/ap/vim/patches/7.2.275 @@ -0,0 +1,95 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.275 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.275 +Problem: Warning for unused argument and comparing signed and unsigned. +Solution: Add type cast. +Files: src/memline.c + + +*** ../vim-7.2.274/src/memline.c 2009-11-03 13:06:03.000000000 +0100 +--- src/memline.c 2009-10-29 20:55:08.000000000 +0100 +*************** +*** 1285,1291 **** + for (i = 0; i < dp->db_line_count; ++i) + { + txt_start = (dp->db_index[i] & DB_INDEX_MASK); +! if (txt_start <= HEADER_SIZE + || txt_start >= (int)dp->db_txt_end) + { + p = (char_u *)"???"; +--- 1285,1291 ---- + for (i = 0; i < dp->db_line_count; ++i) + { + txt_start = (dp->db_index[i] & DB_INDEX_MASK); +! if (txt_start <= (int)HEADER_SIZE + || txt_start >= (int)dp->db_txt_end) + { + p = (char_u *)"???"; +*************** +*** 1296,1302 **** + ml_append(lnum++, p, (colnr_T)0, TRUE); + } + if (has_error) +! ml_append(lnum++, (char_u *)_("???END"), (colnr_T)0, TRUE); + } + } + } +--- 1296,1303 ---- + ml_append(lnum++, p, (colnr_T)0, TRUE); + } + if (has_error) +! ml_append(lnum++, (char_u *)_("???END"), +! (colnr_T)0, TRUE); + } + } + } +*************** +*** 3576,3586 **** + * Make swap file name out of the file name and a directory name. + * Returns pointer to allocated memory or NULL. + */ +- /*ARGSUSED*/ + char_u * + makeswapname(fname, ffname, buf, dir_name) + char_u *fname; +! char_u *ffname; + buf_T *buf; + char_u *dir_name; + { +--- 3577,3586 ---- + * Make swap file name out of the file name and a directory name. + * Returns pointer to allocated memory or NULL. + */ + char_u * + makeswapname(fname, ffname, buf, dir_name) + char_u *fname; +! char_u *ffname UNUSED; + buf_T *buf; + char_u *dir_name; + { +*** ../vim-7.2.274/src/version.c 2009-11-03 14:46:35.000000000 +0100 +--- src/version.c 2009-11-03 15:28:33.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 275, + /**/ + +-- +BRIDGEKEEPER: What is your favorite colour? +GAWAIN: Blue ... No yelloooooww! + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.276 b/source/ap/vim/patches/7.2.276 new file mode 100644 index 000000000..15dc68b00 --- /dev/null +++ b/source/ap/vim/patches/7.2.276 @@ -0,0 +1,63 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.276 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.276 +Problem: Crash when setting 'isprint' to a small bullet. (Raul Coronado) +Solution: Check for the character to be < 256. Also make it possible to + specify a range of multi-byte characters. (Lech Lorens) +Files: src/charset.c + + +*** ../vim-7.2.275/src/charset.c 2009-10-07 16:19:52.000000000 +0200 +--- src/charset.c 2009-11-03 12:46:12.000000000 +0100 +*************** +*** 187,195 **** + if (VIM_ISDIGIT(*p)) + c2 = getdigits(&p); + else + c2 = *p++; + } +! if (c <= 0 || (c2 < c && c2 != -1) || c2 >= 256 + || !(*p == NUL || *p == ',')) + return FAIL; + +--- 187,200 ---- + if (VIM_ISDIGIT(*p)) + c2 = getdigits(&p); + else ++ #ifdef FEAT_MBYTE ++ if (has_mbyte) ++ c2 = mb_ptr2char_adv(&p); ++ else ++ #endif + c2 = *p++; + } +! if (c <= 0 || c >= 256 || (c2 < c && c2 != -1) || c2 >= 256 + || !(*p == NUL || *p == ',')) + return FAIL; + +*** ../vim-7.2.275/src/version.c 2009-11-03 15:32:58.000000000 +0100 +--- src/version.c 2009-11-03 16:03:18.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 276, + /**/ + +-- +BRIDGEKEEPER: What is your favorite editor? +GAWAIN: Emacs ... No, Viiiiiiiiiiimmmmmmm! + "Monty Python and the Holy editor wars" PYTHON (MONTY) SOFTWARE LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.277 b/source/ap/vim/patches/7.2.277 new file mode 100644 index 000000000..ed3caf4d2 --- /dev/null +++ b/source/ap/vim/patches/7.2.277 @@ -0,0 +1,66 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.277 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.277 +Problem: CTRL-Y in a diff'ed window may move the cursor outside of the + window. (Lech Lorens) +Solution: Limit the number of filler lines to the height of the window. + Don't reset filler lines to zero for an empty buffer. +Files: src/move.c + + +*** ../vim-7.2.276/src/move.c 2009-05-15 21:31:11.000000000 +0200 +--- src/move.c 2009-11-03 14:39:55.000000000 +0100 +*************** +*** 183,191 **** + if (curwin->w_topline != 1) + redraw_later(NOT_VALID); + curwin->w_topline = 1; +- #ifdef FEAT_DIFF +- curwin->w_topfill = 0; +- #endif + curwin->w_botline = 2; + curwin->w_valid |= VALID_BOTLINE|VALID_BOTLINE_AP; + #ifdef FEAT_SCROLLBIND +--- 183,188 ---- +*************** +*** 1257,1263 **** + while (line_count-- > 0) + { + #ifdef FEAT_DIFF +! if (curwin->w_topfill < diff_check(curwin, curwin->w_topline)) + { + ++curwin->w_topfill; + ++done; +--- 1254,1261 ---- + while (line_count-- > 0) + { + #ifdef FEAT_DIFF +! if (curwin->w_topfill < diff_check(curwin, curwin->w_topline) +! && curwin->w_topfill < curwin->w_height - 1) + { + ++curwin->w_topfill; + ++done; +*** ../vim-7.2.276/src/version.c 2009-11-03 16:03:59.000000000 +0100 +--- src/version.c 2009-11-03 16:22:04.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 277, + /**/ + +-- +SIGFUN -- signature too funny (core dumped) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.278 b/source/ap/vim/patches/7.2.278 new file mode 100644 index 000000000..edf4e58af --- /dev/null +++ b/source/ap/vim/patches/7.2.278 @@ -0,0 +1,74 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.278 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.278 +Problem: Using magic number in the folding code. +Solution: Use the defined MAX_LEVEL. +Files: src/fold.c + + +*** ../vim-7.2.277/src/fold.c 2009-11-03 14:46:35.000000000 +0100 +--- src/fold.c 2009-11-03 12:36:37.000000000 +0100 +*************** +*** 1932,1938 **** + #ifdef FEAT_EVAL + if (*wp->w_p_fdt != NUL) + { +! char_u dashes[51]; + win_T *save_curwin; + int level; + char_u *p; +--- 1932,1938 ---- + #ifdef FEAT_EVAL + if (*wp->w_p_fdt != NUL) + { +! char_u dashes[MAX_LEVEL + 2]; + win_T *save_curwin; + int level; + char_u *p; +*************** +*** 1944,1951 **** + /* Set "v:folddashes" to a string of "level" dashes. */ + /* Set "v:foldlevel" to "level". */ + level = foldinfo->fi_level; +! if (level > 50) +! level = 50; + vim_memset(dashes, '-', (size_t)level); + dashes[level] = NUL; + set_vim_var_string(VV_FOLDDASHES, dashes, -1); +--- 1944,1951 ---- + /* Set "v:folddashes" to a string of "level" dashes. */ + /* Set "v:foldlevel" to "level". */ + level = foldinfo->fi_level; +! if (level > (int)sizeof(dashes) - 1) +! level = (int)sizeof(dashes) - 1; + vim_memset(dashes, '-', (size_t)level); + dashes[level] = NUL; + set_vim_var_string(VV_FOLDDASHES, dashes, -1); +*** ../vim-7.2.277/src/version.c 2009-11-03 16:22:59.000000000 +0100 +--- src/version.c 2009-11-03 16:29:08.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 278, + /**/ + +-- +BRIDGEKEEPER: What is the air-speed velocity of an unladen swallow? +ARTHUR: What do you mean? An African or European swallow? +BRIDGEKEEPER: Er ... I don't know that ... Aaaaarrrrrrggghhh! + BRIDGEKEEPER is cast into the gorge. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.279 b/source/ap/vim/patches/7.2.279 new file mode 100644 index 000000000..bdf58fc8e --- /dev/null +++ b/source/ap/vim/patches/7.2.279 @@ -0,0 +1,120 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.279 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.279 +Problem: Invalid memory read with visual mode "r". (Dominique Pelle) +Solution: Make sure the cursor position is valid. Don't check the cursor + position but the position being used. And make sure we get the + right line. +Files: src/misc2.c, src/ops.c + + +*** ../vim-7.2.278/src/misc2.c 2009-05-16 21:06:36.000000000 +0200 +--- src/misc2.c 2009-11-03 16:43:10.000000000 +0100 +*************** +*** 156,162 **** + || ((ve_flags & VE_ONEMORE) && wcol < MAXCOL) + #endif + ; +! line = ml_get_curline(); + + if (wcol >= MAXCOL) + { +--- 156,162 ---- + || ((ve_flags & VE_ONEMORE) && wcol < MAXCOL) + #endif + ; +! line = ml_get_buf(curbuf, pos->lnum, FALSE); + + if (wcol >= MAXCOL) + { +*************** +*** 332,340 **** + #endif + + #ifdef FEAT_MBYTE +! /* prevent cursor from moving on the trail byte */ + if (has_mbyte) +! mb_adjust_cursor(); + #endif + + if (col < wcol) +--- 332,340 ---- + #endif + + #ifdef FEAT_MBYTE +! /* prevent from moving onto a trail byte */ + if (has_mbyte) +! mb_adjustpos(pos); + #endif + + if (col < wcol) +*** ../vim-7.2.278/src/ops.c 2009-09-30 15:15:33.000000000 +0200 +--- src/ops.c 2009-11-03 15:18:50.000000000 +0100 +*************** +*** 2020,2025 **** +--- 2020,2026 ---- + bd.is_MAX = (curwin->w_curswant == MAXCOL); + for ( ; curwin->w_cursor.lnum <= oap->end.lnum; ++curwin->w_cursor.lnum) + { ++ curwin->w_cursor.col = 0; /* make sure cursor position is valid */ + block_prep(oap, &bd, curwin->w_cursor.lnum, TRUE); + if (bd.textlen == 0 && (!virtual_op || bd.is_MAX)) + continue; /* nothing to replace */ +*************** +*** 2035,2040 **** +--- 2036,2042 ---- + { + pos_T vpos; + ++ vpos.lnum = curwin->w_cursor.lnum; + getvpos(&vpos, oap->start_vcol); + bd.startspaces += vpos.coladd; + n = bd.startspaces; +*************** +*** 2693,2703 **** + * initial coladd offset as part of "startspaces" */ + if (bd.is_short) + { +! linenr_T lnum = curwin->w_cursor.lnum; +! +! curwin->w_cursor.lnum = linenr; + (void)getvpos(&vpos, oap->start_vcol); +- curwin->w_cursor.lnum = lnum; + } + else + vpos.coladd = 0; +--- 2695,2702 ---- + * initial coladd offset as part of "startspaces" */ + if (bd.is_short) + { +! vpos.lnum = linenr; + (void)getvpos(&vpos, oap->start_vcol); + } + else + vpos.coladd = 0; +*** ../vim-7.2.278/src/version.c 2009-11-03 16:29:48.000000000 +0100 +--- src/version.c 2009-11-03 16:41:53.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 279, + /**/ + +-- +BEDEVERE: How do you know so much about swallows? +ARTHUR: Well you have to know these things when you're a king, you know. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.280 b/source/ap/vim/patches/7.2.280 new file mode 100644 index 000000000..6223ac450 --- /dev/null +++ b/source/ap/vim/patches/7.2.280 @@ -0,0 +1,251 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.280 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.280 +Problem: A redraw in a custom statusline with %! may cause a crash. + (Yukihiro Nakadaira) +Solution: Make a copy of 'statusline'. Also fix typo in function name + redraw_custum_statusline. (party by Dominique Pelle) +Files: src/screen.c + + +*** ../vim-7.2.279/src/screen.c 2009-07-29 16:13:35.000000000 +0200 +--- src/screen.c 2009-11-03 17:13:16.000000000 +0100 +*************** +*** 132,138 **** + static void draw_vsep_win __ARGS((win_T *wp, int row)); + #endif + #ifdef FEAT_STL_OPT +! static void redraw_custum_statusline __ARGS((win_T *wp)); + #endif + #ifdef FEAT_SEARCH_EXTRA + #define SEARCH_HL_PRIORITY 0 +--- 132,138 ---- + static void draw_vsep_win __ARGS((win_T *wp, int row)); + #endif + #ifdef FEAT_STL_OPT +! static void redraw_custom_statusline __ARGS((win_T *wp)); + #endif + #ifdef FEAT_SEARCH_EXTRA + #define SEARCH_HL_PRIORITY 0 +*************** +*** 5772,5778 **** + else if (*p_stl != NUL || *wp->w_p_stl != NUL) + { + /* redraw custom status line */ +! redraw_custum_statusline(wp); + } + #endif + else +--- 5794,5800 ---- + else if (*p_stl != NUL || *wp->w_p_stl != NUL) + { + /* redraw custom status line */ +! redraw_custom_statusline(wp); + } + #endif + else +*************** +*** 5897,5914 **** + * errors encountered. + */ + static void +! redraw_custum_statusline(wp) + win_T *wp; + { +! int save_called_emsg = called_emsg; + + called_emsg = FALSE; + win_redr_custom(wp, FALSE); + if (called_emsg) + set_string_option_direct((char_u *)"statusline", -1, + (char_u *)"", OPT_FREE | (*wp->w_p_stl != NUL + ? OPT_LOCAL : OPT_GLOBAL), SID_ERROR); + called_emsg |= save_called_emsg; + } + #endif + +--- 5919,5949 ---- + * errors encountered. + */ + static void +! redraw_custom_statusline(wp) + win_T *wp; + { +! static int entered = FALSE; +! int save_called_emsg = called_emsg; +! +! /* When called recursively return. This can happen when the statusline +! * contains an expression that triggers a redraw. */ +! if (entered) +! return; +! entered = TRUE; + + called_emsg = FALSE; + win_redr_custom(wp, FALSE); + if (called_emsg) ++ { ++ /* When there is an error disable the statusline, otherwise the ++ * display is messed up with errors and a redraw triggers the problem ++ * again and again. */ + set_string_option_direct((char_u *)"statusline", -1, + (char_u *)"", OPT_FREE | (*wp->w_p_stl != NUL + ? OPT_LOCAL : OPT_GLOBAL), SID_ERROR); ++ } + called_emsg |= save_called_emsg; ++ entered = FALSE; + } + #endif + +*************** +*** 6016,6021 **** +--- 6051,6057 ---- + int len; + int fillchar; + char_u buf[MAXPATHL]; ++ char_u *stl; + char_u *p; + struct stl_hlrec hltab[STL_MAX_ITEM]; + struct stl_hlrec tabtab[STL_MAX_ITEM]; +*************** +*** 6025,6031 **** + if (wp == NULL) + { + /* Use 'tabline'. Always at the first line of the screen. */ +! p = p_tal; + row = 0; + fillchar = ' '; + attr = hl_attr(HLF_TPF); +--- 6061,6067 ---- + if (wp == NULL) + { + /* Use 'tabline'. Always at the first line of the screen. */ +! stl = p_tal; + row = 0; + fillchar = ' '; + attr = hl_attr(HLF_TPF); +*************** +*** 6042,6058 **** + + if (draw_ruler) + { +! p = p_ruf; + /* advance past any leading group spec - implicit in ru_col */ +! if (*p == '%') + { +! if (*++p == '-') +! p++; +! if (atoi((char *) p)) +! while (VIM_ISDIGIT(*p)) +! p++; +! if (*p++ != '(') +! p = p_ruf; + } + #ifdef FEAT_VERTSPLIT + col = ru_col - (Columns - W_WIDTH(wp)); +--- 6078,6094 ---- + + if (draw_ruler) + { +! stl = p_ruf; + /* advance past any leading group spec - implicit in ru_col */ +! if (*stl == '%') + { +! if (*++stl == '-') +! stl++; +! if (atoi((char *)stl)) +! while (VIM_ISDIGIT(*stl)) +! stl++; +! if (*stl++ != '(') +! stl = p_ruf; + } + #ifdef FEAT_VERTSPLIT + col = ru_col - (Columns - W_WIDTH(wp)); +*************** +*** 6081,6089 **** + else + { + if (*wp->w_p_stl != NUL) +! p = wp->w_p_stl; + else +! p = p_stl; + # ifdef FEAT_EVAL + use_sandbox = was_set_insecurely((char_u *)"statusline", + *wp->w_p_stl == NUL ? 0 : OPT_LOCAL); +--- 6117,6125 ---- + else + { + if (*wp->w_p_stl != NUL) +! stl = wp->w_p_stl; + else +! stl = p_stl; + # ifdef FEAT_EVAL + use_sandbox = was_set_insecurely((char_u *)"statusline", + *wp->w_p_stl == NUL ? 0 : OPT_LOCAL); +*************** +*** 6098,6107 **** + if (maxwidth <= 0) + return; + + width = build_stl_str_hl(wp == NULL ? curwin : wp, + buf, sizeof(buf), +! p, use_sandbox, + fillchar, maxwidth, hltab, tabtab); + len = (int)STRLEN(buf); + + while (width < maxwidth && len < (int)sizeof(buf) - 1) +--- 6134,6147 ---- + if (maxwidth <= 0) + return; + ++ /* Make a copy, because the statusline may include a function call that ++ * might change the option value and free the memory. */ ++ stl = vim_strsave(stl); + width = build_stl_str_hl(wp == NULL ? curwin : wp, + buf, sizeof(buf), +! stl, use_sandbox, + fillchar, maxwidth, hltab, tabtab); ++ vim_free(stl); + len = (int)STRLEN(buf); + + while (width < maxwidth && len < (int)sizeof(buf) - 1) +*************** +*** 9465,9471 **** + #if defined(FEAT_STL_OPT) && defined(FEAT_WINDOWS) + if ((*p_stl != NUL || *curwin->w_p_stl != NUL) && curwin->w_status_height) + { +! redraw_custum_statusline(curwin); + } + else + #endif +--- 9505,9511 ---- + #if defined(FEAT_STL_OPT) && defined(FEAT_WINDOWS) + if ((*p_stl != NUL || *curwin->w_p_stl != NUL) && curwin->w_status_height) + { +! redraw_custom_statusline(curwin); + } + else + #endif +*** ../vim-7.2.279/src/version.c 2009-11-03 16:44:04.000000000 +0100 +--- src/version.c 2009-11-03 17:15:35.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 280, + /**/ + +-- +Every exit is an entrance into something else. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.281 b/source/ap/vim/patches/7.2.281 new file mode 100644 index 000000000..f73d7a543 --- /dev/null +++ b/source/ap/vim/patches/7.2.281 @@ -0,0 +1,81 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.281 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.281 +Problem: 'cursorcolumn' highlighting is wrong in diff mode. +Solution: Adjust the column computation. (Lech Lorens) +Files: src/screen.c + + +*** ../vim-7.2.280/src/screen.c 2009-11-03 17:20:18.000000000 +0100 +--- src/screen.c 2009-11-03 17:13:16.000000000 +0100 +*************** +*** 3008,3018 **** + mb_ptr_adv(ptr); + } + +! #ifdef FEAT_VIRTUALEDIT +! /* When 'virtualedit' is set the end of the line may be before the +! * start of the displayed part. */ +! if (vcol < v && *ptr == NUL && virtual_active()) + vcol = v; + #endif + + /* Handle a character that's not completely on the screen: Put ptr at +--- 3008,3040 ---- + mb_ptr_adv(ptr); + } + +! #if defined(FEAT_SYN_HL) || defined(FEAT_VIRTUALEDIT) || defined(FEAT_VISUAL) +! /* When: +! * - 'cuc' is set, or +! * - 'virtualedit' is set, or +! * - the visual mode is active, +! * the end of the line may be before the start of the displayed part. +! */ +! if (vcol < v && ( +! # ifdef FEAT_SYN_HL +! wp->w_p_cuc +! # if defined(FEAT_VIRTUALEDIT) || defined(FEAT_VISUAL) +! || +! # endif +! # endif +! # ifdef FEAT_VIRTUALEDIT +! virtual_active() +! # ifdef FEAT_VISUAL +! || +! # endif +! # endif +! # ifdef FEAT_VISUAL +! (VIsual_active && wp->w_buffer == curwin->w_buffer) +! # endif +! )) +! { + vcol = v; ++ } + #endif + + /* Handle a character that's not completely on the screen: Put ptr at +*** ../vim-7.2.280/src/version.c 2009-11-03 17:20:18.000000000 +0100 +--- src/version.c 2009-11-03 17:34:54.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 281, + /**/ + +-- +Every person is responsible for the choices he makes. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.282 b/source/ap/vim/patches/7.2.282 new file mode 100644 index 000000000..dd4dc6476 --- /dev/null +++ b/source/ap/vim/patches/7.2.282 @@ -0,0 +1,47 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.282 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.282 +Problem: A fold can't be closed. +Solution: Initialize fd_small to MAYBE. (Lech Lorens) +Files: src/fold.c + + +*** ../vim-7.2.281/src/fold.c 2009-11-03 16:29:48.000000000 +0100 +--- src/fold.c 2009-11-03 17:41:50.000000000 +0100 +*************** +*** 2851,2856 **** +--- 2851,2858 ---- + fp[1].fd_top = bot + 1; + fp[1].fd_len = fp->fd_len - (fp[1].fd_top - fp->fd_top); + fp[1].fd_flags = fp->fd_flags; ++ fp[1].fd_small = MAYBE; ++ fp->fd_small = MAYBE; + + /* Move nested folds below bot to new fold. There can't be + * any between top and bot, they have been removed by the caller. */ +*** ../vim-7.2.281/src/version.c 2009-11-03 17:36:09.000000000 +0100 +--- src/version.c 2009-11-03 17:59:12.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 282, + /**/ + +-- +You can be stopped by the police for biking over 65 miles per hour. +You are not allowed to walk across a street on your hands. + [real standing laws in Connecticut, United States of America] + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.283 b/source/ap/vim/patches/7.2.283 new file mode 100644 index 000000000..0d6f6058e --- /dev/null +++ b/source/ap/vim/patches/7.2.283 @@ -0,0 +1,73 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.283 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.283 +Problem: Changing font while the window is maximized doesn't keep the + window maximized. +Solution: Recompute number of lines and columns after changing font. (James + Vega) +Files: src/gui_gtk_x11.c + + +*** ../vim-7.2.282/src/gui_gtk_x11.c 2009-09-23 18:14:13.000000000 +0200 +--- src/gui_gtk_x11.c 2009-11-03 17:56:27.000000000 +0100 +*************** +*** 5267,5274 **** + # endif + #endif /* !HAVE_GTK2 */ + +! /* Preserve the logical dimensions of the screen. */ +! update_window_manager_hints(0, 0); + + return OK; + } +--- 5267,5290 ---- + # endif + #endif /* !HAVE_GTK2 */ + +! #ifdef HAVE_GTK2 +! if (gui_mch_maximized()) +! { +! int w, h; +! +! /* Update lines and columns in accordance with the new font, keep the +! * window maximized. */ +! gtk_window_get_size(GTK_WINDOW(gui.mainwin), &w, &h); +! w -= get_menu_tool_width(); +! h -= get_menu_tool_height(); +! gui_resize_shell(w, h); +! } +! else +! #endif +! { +! /* Preserve the logical dimensions of the screen. */ +! update_window_manager_hints(0, 0); +! } + + return OK; + } +*** ../vim-7.2.282/src/version.c 2009-11-03 18:04:26.000000000 +0100 +--- src/version.c 2009-11-03 18:11:53.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 283, + /**/ + +-- +If an elephant is left tied to a parking meter, the parking fee has to be paid +just as it would for a vehicle. + [real standing law in Florida, United States of America] + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.284 b/source/ap/vim/patches/7.2.284 new file mode 100644 index 000000000..5b4336b1b --- /dev/null +++ b/source/ap/vim/patches/7.2.284 @@ -0,0 +1,52 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.284 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.284 +Problem: When editing the same buffer in two windows, one with folding, + display may be wrong after changes. +Solution: Call set_topline() to take care of side effects. (Lech Lorens) +Files: src/misc1.c + + +*** ../vim-7.2.283/src/misc1.c 2009-07-22 11:03:38.000000000 +0200 +--- src/misc1.c 2009-11-03 18:38:15.000000000 +0100 +*************** +*** 2886,2891 **** +--- 2886,2898 ---- + } + #endif + } ++ ++ #ifdef FEAT_FOLDING ++ /* Take care of side effects for setting w_topline when folds have ++ * changed. Esp. when the buffer was changed in another window. */ ++ if (hasAnyFolding(wp)) ++ set_topline(wp, wp->w_topline); ++ #endif + } + } + +*** ../vim-7.2.283/src/version.c 2009-11-03 18:13:36.000000000 +0100 +--- src/version.c 2009-11-03 18:44:12.000000000 +0100 +*************** +*** 678,679 **** +--- 678,681 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 284, + /**/ + +-- +Men may not be seen publicly in any kind of strapless gown. + [real standing law in Florida, United States of America] + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.285 b/source/ap/vim/patches/7.2.285 new file mode 100644 index 000000000..2a34e17ee --- /dev/null +++ b/source/ap/vim/patches/7.2.285 @@ -0,0 +1,56 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.285 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.285 (after 7.2.169) +Problem: CTRL-U in Insert mode also deletes indent. (Andrey Voropaev) +Solution: Fix mistake made in patch 7.2.169. +Files: src/edit.c + + +*** ../vim-7.2.284/src/edit.c 2009-07-09 18:15:19.000000000 +0200 +--- src/edit.c 2009-11-05 20:25:15.000000000 +0100 +*************** +*** 8519,8525 **** + { + save_col = curwin->w_cursor.col; + beginline(BL_WHITE); +! if (curwin->w_cursor.col < (colnr_T)temp) + mincol = curwin->w_cursor.col; + curwin->w_cursor.col = save_col; + } +--- 8519,8525 ---- + { + save_col = curwin->w_cursor.col; + beginline(BL_WHITE); +! if (curwin->w_cursor.col < save_col) + mincol = curwin->w_cursor.col; + curwin->w_cursor.col = save_col; + } +*** ../vim-7.2.284/src/version.c 2009-11-03 18:46:53.000000000 +0100 +--- src/version.c 2009-11-11 13:21:25.000000000 +0100 +*************** +*** 678,679 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 285, + /**/ + +-- +(letter from Mark to Mike, about the film's probable certificate) + I would like to get back to the Censor and agree to lose the shits, take + the odd Jesus Christ out and lose Oh fuck off, but to retain 'fart in + your general direction', 'castanets of your testicles' and 'oral sex' + and ask him for an 'A' rating on that basis. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.286 b/source/ap/vim/patches/7.2.286 new file mode 100644 index 000000000..7577502f0 --- /dev/null +++ b/source/ap/vim/patches/7.2.286 @@ -0,0 +1,227 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.286 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.286 (after 7.2.269) +Problem: The "--startuptime=<file>" argument is not consistent with other + arguments. +Solution: Use "--startuptime <file>". Added the +startuptime feature. +Files: runtime/doc/eval.txt, runtime/doc/starting.txt, + runtime/doc/various.txt, src/eval.c, src/main.c, src/version.c + + +*** ../vim-7.2.285/runtime/doc/eval.txt 2009-04-22 12:53:31.000000000 +0200 +--- runtime/doc/eval.txt 2009-11-11 13:01:58.000000000 +0100 +*************** +*** 5869,5874 **** +--- 5881,5887 ---- + signs Compiled with |:sign| support. + smartindent Compiled with 'smartindent' support. + sniff Compiled with SNiFF interface support. ++ startuptime Compiled with |--startuptime| support. + statusline Compiled with support for 'statusline', 'rulerformat' + and special formats of 'titlestring' and 'iconstring'. + sun_workshop Compiled with support for Sun |workshop|. +*** ../vim-7.2.285/runtime/doc/starting.txt 2009-11-03 12:10:39.000000000 +0100 +--- runtime/doc/starting.txt 2009-11-11 13:20:56.000000000 +0100 +*************** +*** 144,155 **** + -u NORC no yes + --noplugin yes no + +! --startuptime={fname} *--startuptime* + During startup write timing messages to the file {fname}. + This can be used to find out where time is spent while loading +! your .vimrc and plugins. + When {fname} already exists new messages are appended. +! {only when compiled with this feature} + + *--literal* + --literal Take file names literally, don't expand wildcards. Not needed +--- 144,156 ---- + -u NORC no yes + --noplugin yes no + +! --startuptime {fname} *--startuptime* + During startup write timing messages to the file {fname}. + This can be used to find out where time is spent while loading +! your .vimrc, plugins and opening the first file. + When {fname} already exists new messages are appended. +! (Only available when compiled with the |+startuptime| +! feature). + + *--literal* + --literal Take file names literally, don't expand wildcards. Not needed +*** ../vim-7.2.285/runtime/doc/various.txt 2009-07-09 15:55:34.000000000 +0200 +--- runtime/doc/various.txt 2009-11-11 13:03:52.000000000 +0100 +*************** +*** 374,379 **** +--- 374,380 ---- + B *+signs* |:sign| + N *+smartindent* |'smartindent'| + m *+sniff* SniFF interface |sniff| ++ N *+startuptime* |--startuptime| argument + N *+statusline* Options 'statusline', 'rulerformat' and special + formats of 'titlestring' and 'iconstring' + m *+sun_workshop* |workshop| +*** ../vim-7.2.285/src/eval.c 2009-11-03 14:26:29.000000000 +0100 +--- src/eval.c 2009-11-11 12:59:53.000000000 +0100 +*************** +*** 11736,11741 **** +--- 11736,11744 ---- + #ifdef FEAT_SNIFF + "sniff", + #endif ++ #ifdef STARTUPTIME ++ "startuptime", ++ #endif + #ifdef FEAT_STL_OPT + "statusline", + #endif +*** ../vim-7.2.285/src/main.c 2009-11-03 12:10:39.000000000 +0100 +--- src/main.c 2009-11-08 12:57:46.000000000 +0100 +*************** +*** 204,212 **** + #ifdef STARTUPTIME + for (i = 1; i < argc; ++i) + { +! if (STRNICMP(argv[i], "--startuptime=", 14) == 0) + { +! time_fd = mch_fopen(argv[i] + 14, "a"); + TIME_MSG("--- VIM STARTING ---"); + break; + } +--- 204,212 ---- + #ifdef STARTUPTIME + for (i = 1; i < argc; ++i) + { +! if (STRICMP(argv[i], "--startuptime") == 0 && i + 1 < argc) + { +! time_fd = mch_fopen(argv[i + 1], "a"); + TIME_MSG("--- VIM STARTING ---"); + break; + } +*************** +*** 1726,1731 **** +--- 1726,1736 ---- + want_argument = TRUE; + argv_idx += 3; + } ++ else if (STRNICMP(argv[0] + argv_idx, "startuptime", 11) == 0) ++ { ++ want_argument = TRUE; ++ argv_idx += 11; ++ } + #ifdef FEAT_CLIENTSERVER + else if (STRNICMP(argv[0] + argv_idx, "serverlist", 10) == 0) + ; /* already processed -- no arg */ +*************** +*** 1761,1770 **** + /* already processed, skip */ + } + #endif +- else if (STRNICMP(argv[0] + argv_idx, "startuptime", 11) == 0) +- { +- /* already processed, skip */ +- } + else + { + if (argv[0][argv_idx]) +--- 1766,1771 ---- +*************** +*** 2061,2067 **** + mainerr(ME_GARBAGE, (char_u *)argv[0]); + + --argc; +! if (argc < 1 && c != 'S') + mainerr_arg_missing((char_u *)argv[0]); + ++argv; + argv_idx = -1; +--- 2062,2068 ---- + mainerr(ME_GARBAGE, (char_u *)argv[0]); + + --argc; +! if (argc < 1 && c != 'S') /* -S has an optional argument */ + mainerr_arg_missing((char_u *)argv[0]); + ++argv; + argv_idx = -1; +*************** +*** 2102,2112 **** + (char_u *)argv[0]; + break; + +! case '-': /* "--cmd {command}" execute command */ +! if (parmp->n_pre_commands >= MAX_ARG_CMDS) +! mainerr(ME_EXTRA_CMD, NULL); +! parmp->pre_commands[parmp->n_pre_commands++] = + (char_u *)argv[0]; + break; + + /* case 'd': -d {device} is handled in mch_check_win() for the +--- 2103,2118 ---- + (char_u *)argv[0]; + break; + +! case '-': +! if (argv[-1][2] == 'c') +! { +! /* "--cmd {command}" execute command */ +! if (parmp->n_pre_commands >= MAX_ARG_CMDS) +! mainerr(ME_EXTRA_CMD, NULL); +! parmp->pre_commands[parmp->n_pre_commands++] = + (char_u *)argv[0]; ++ } ++ /* "--startuptime <file>" already handled */ + break; + + /* case 'd': -d {device} is handled in mch_check_win() for the +*************** +*** 3144,3149 **** +--- 3150,3158 ---- + main_msg(_("--serverlist\t\tList available Vim server names and exit")); + main_msg(_("--servername <name>\tSend to/become the Vim server <name>")); + #endif ++ #ifdef STARTUPTIME ++ main_msg(_("--startuptime=<file>\tWrite startup timing messages to <file>")); ++ #endif + #ifdef FEAT_VIMINFO + main_msg(_("-i <viminfo>\t\tUse <viminfo> instead of .viminfo")); + #endif +*** ../vim-7.2.285/src/version.c 2009-11-11 13:22:09.000000000 +0100 +--- src/version.c 2009-11-11 14:17:28.000000000 +0100 +*************** +*** 494,499 **** +--- 494,504 ---- + #else + "-sniff", + #endif ++ #ifdef STARTUPTIME ++ "+startuptime", ++ #else ++ "-startuptime", ++ #endif + #ifdef FEAT_STL_OPT + "+statusline", + #else +*** ../vim-7.2.285/src/version.c 2009-11-11 13:22:09.000000000 +0100 +--- src/version.c 2009-11-11 14:17:28.000000000 +0100 +*************** +*** 678,679 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 286, + /**/ + +-- +A fool must search for a greater fool to find admiration. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.287 b/source/ap/vim/patches/7.2.287 new file mode 100644 index 000000000..0f8e170c1 --- /dev/null +++ b/source/ap/vim/patches/7.2.287 @@ -0,0 +1,54 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.287 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.287 +Problem: Warning from gcc 3.4 about uninitialized variable. +Solution: Move assignment outside of #ifdef. +Files: src/if_perl.xs + + +*** ../vim-7.2.286/src/if_perl.xs 2009-07-14 16:05:14.000000000 +0200 +--- src/if_perl.xs 2009-11-11 12:29:32.000000000 +0100 +*************** +*** 720,727 **** + #ifdef HAVE_SANDBOX + if (sandbox) + { + # ifndef MAKE_TEST /* avoid a warning for unreachable code */ +! if ((safe = perl_get_sv( "VIM::safe", FALSE )) == NULL || !SvTRUE(safe)) + EMSG(_("E299: Perl evaluation forbidden in sandbox without the Safe module")); + else + # endif +--- 720,728 ---- + #ifdef HAVE_SANDBOX + if (sandbox) + { ++ safe = perl_get_sv( "VIM::safe", FALSE ); + # ifndef MAKE_TEST /* avoid a warning for unreachable code */ +! if (safe == NULL || !SvTRUE(safe)) + EMSG(_("E299: Perl evaluation forbidden in sandbox without the Safe module")); + else + # endif +*** ../vim-7.2.286/src/version.c 2009-11-11 14:21:48.000000000 +0100 +--- src/version.c 2009-11-11 14:44:49.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 287, + /**/ + +-- +The most powerful force in the universe is gossip. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.288 b/source/ap/vim/patches/7.2.288 new file mode 100644 index 000000000..ab9ecdaf3 --- /dev/null +++ b/source/ap/vim/patches/7.2.288 @@ -0,0 +1,52 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.288 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.288 +Problem: Python 2.6 pyconfig.h redefines macros. +Solution: Undefine the macros before including pyconfig.h. +Files: src/if_python.c + + +*** ../vim-7.2.287/src/if_python.c 2009-11-03 11:43:05.000000000 +0100 +--- src/if_python.c 2009-11-11 12:33:37.000000000 +0100 +*************** +*** 37,42 **** +--- 37,48 ---- + #ifdef HAVE_STDARG_H + # undef HAVE_STDARG_H /* Python's config.h defines it as well. */ + #endif ++ #ifdef _POSIX_C_SOURCE ++ # undef _POSIX_C_SOURCE /* pyconfig.h defines it as well. */ ++ #endif ++ #ifdef _XOPEN_SOURCE ++ # undef _XOPEN_SOURCE /* pyconfig.h defines it as well. */ ++ #endif + + #define PY_SSIZE_T_CLEAN + +*** ../vim-7.2.287/src/version.c 2009-11-11 14:45:36.000000000 +0100 +--- src/version.c 2009-11-11 15:05:51.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 288, + /**/ + +-- +I am always surprised in the Linux world how quickly solutions can be +obtained. (Imagine sending an email to Bill Gates, asking why Windows +crashed, and how to fix it... and then getting an answer that fixed the +problem... <0>_<0> !) -- Mark Langdon + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.289 b/source/ap/vim/patches/7.2.289 new file mode 100644 index 000000000..4009bb9bd --- /dev/null +++ b/source/ap/vim/patches/7.2.289 @@ -0,0 +1,120 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.289 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.289 +Problem: Checking wrong struct member. +Solution: Change tb_buf to tb_noremap. (Dominique Pelle) +Files: src/getchar.c + + +*** ../vim-7.2.288/src/getchar.c 2009-09-30 15:15:33.000000000 +0200 +--- src/getchar.c 2009-11-11 12:50:58.000000000 +0100 +*************** +*** 22,28 **** + * These buffers are used for storing: + * - stuffed characters: A command that is translated into another command. + * - redo characters: will redo the last change. +! * - recorded chracters: for the "q" command. + * + * The bytes are stored like in the typeahead buffer: + * - K_SPECIAL introduces a special key (two more bytes follow). A literal +--- 22,28 ---- + * These buffers are used for storing: + * - stuffed characters: A command that is translated into another command. + * - redo characters: will redo the last change. +! * - recorded characters: for the "q" command. + * + * The bytes are stored like in the typeahead buffer: + * - K_SPECIAL introduces a special key (two more bytes follow). A literal +*************** +*** 1283,1289 **** + EMSG2(_(e_intern2), "Free typebuf 1"); + else + vim_free(typebuf.tb_buf); +! if (typebuf.tb_buf == noremapbuf_init) + EMSG2(_(e_intern2), "Free typebuf 2"); + else + vim_free(typebuf.tb_noremap); +--- 1283,1289 ---- + EMSG2(_(e_intern2), "Free typebuf 1"); + else + vim_free(typebuf.tb_buf); +! if (typebuf.tb_noremap == noremapbuf_init) + EMSG2(_(e_intern2), "Free typebuf 2"); + else + vim_free(typebuf.tb_noremap); +*************** +*** 1516,1522 **** + * wanted. + * This translates escaped K_SPECIAL and CSI bytes to a K_SPECIAL or CSI byte. + * Collects the bytes of a multibyte character into the whole character. +! * Returns the modifers in the global "mod_mask". + */ + int + vgetc() +--- 1516,1522 ---- + * wanted. + * This translates escaped K_SPECIAL and CSI bytes to a K_SPECIAL or CSI byte. + * Collects the bytes of a multibyte character into the whole character. +! * Returns the modifiers in the global "mod_mask". + */ + int + vgetc() +*************** +*** 3320,3326 **** + retval = 1; + goto theend; + } +! /* An abbrevation cannot contain white space. */ + for (n = 0; n < len; ++n) + if (vim_iswhite(keys[n])) + { +--- 3320,3326 ---- + retval = 1; + goto theend; + } +! /* An abbreviation cannot contain white space. */ + for (n = 0; n < len; ++n) + if (vim_iswhite(keys[n])) + { +*************** +*** 4272,4278 **** + + /* + * Check for word before the cursor: If it ends in a keyword char all +! * chars before it must be al keyword chars or non-keyword chars, but not + * white space. If it ends in a non-keyword char we accept any characters + * before it except white space. + */ +--- 4272,4278 ---- + + /* + * Check for word before the cursor: If it ends in a keyword char all +! * chars before it must be keyword chars or non-keyword chars, but not + * white space. If it ends in a non-keyword char we accept any characters + * before it except white space. + */ +*** ../vim-7.2.288/src/version.c 2009-11-11 15:06:59.000000000 +0100 +--- src/version.c 2009-11-11 16:19:12.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 289, + /**/ + +-- +A M00se once bit my sister ... + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.290 b/source/ap/vim/patches/7.2.290 new file mode 100644 index 000000000..ba4fd62dc --- /dev/null +++ b/source/ap/vim/patches/7.2.290 @@ -0,0 +1,157 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.290 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.290 +Problem: Not freeing memory from ":lmap", ":xmap" and ":menutranslate". +Solution: Free the memory when exiting. (Dominique Pelle) +Files: src/misc2.c + + +*** ../vim-7.2.289/src/misc2.c 2009-11-03 16:44:04.000000000 +0100 +--- src/misc2.c 2009-11-11 16:49:13.000000000 +0100 +*************** +*** 1005,1013 **** +--- 1005,1018 ---- + # ifdef FEAT_MENU + /* Clear menus. */ + do_cmdline_cmd((char_u *)"aunmenu *"); ++ # ifdef FEAT_MULTI_LANG ++ do_cmdline_cmd((char_u *)"menutranslate clear"); ++ # endif + # endif + + /* Clear mappings, abbreviations, breakpoints. */ ++ do_cmdline_cmd((char_u *)"lmapclear"); ++ do_cmdline_cmd((char_u *)"xmapclear"); + do_cmdline_cmd((char_u *)"mapclear"); + do_cmdline_cmd((char_u *)"mapclear!"); + do_cmdline_cmd((char_u *)"abclear"); +*************** +*** 1282,1288 **** + + /* + * Escape "string" for use as a shell argument with system(). +! * This uses single quotes, except when we know we need to use double qoutes + * (MS-DOS and MS-Windows without 'shellslash' set). + * Escape a newline, depending on the 'shell' option. + * When "do_special" is TRUE also replace "!", "%", "#" and things starting +--- 1287,1293 ---- + + /* + * Escape "string" for use as a shell argument with system(). +! * This uses single quotes, except when we know we need to use double quotes + * (MS-DOS and MS-Windows without 'shellslash' set). + * Escape a newline, depending on the 'shell' option. + * When "do_special" is TRUE also replace "!", "%", "#" and things starting +*************** +*** 1537,1543 **** + #if defined(FEAT_VISUALEXTRA) || defined(PROTO) + /* + * Copy a character a number of times. +! * Does not work for multi-byte charactes! + */ + void + copy_chars(ptr, count, c) +--- 1542,1548 ---- + #if defined(FEAT_VISUALEXTRA) || defined(PROTO) + /* + * Copy a character a number of times. +! * Does not work for multi-byte characters! + */ + void + copy_chars(ptr, count, c) +*************** +*** 4260,4266 **** + * or '**76' is transposed to '**N'( 'N' is ASCII value 76). + * For EBCDIC you get different character values. + * If no restrict is given after '**' the default is used. +! * Due to this technic the path looks awful if you print it as a + * string. + */ + len = 0; +--- 4265,4271 ---- + * or '**76' is transposed to '**N'( 'N' is ASCII value 76). + * For EBCDIC you get different character values. + * If no restrict is given after '**' the default is used. +! * Due to this technique the path looks awful if you print it as a + * string. + */ + len = 0; +*************** +*** 4649,4655 **** + && !mch_isdir(stackp->ffs_filearray[i])) + continue; /* not a directory */ + +! /* prepare the filename to be checked for existance + * below */ + STRCPY(file_path, stackp->ffs_filearray[i]); + add_pathsep(file_path); +--- 4654,4660 ---- + && !mch_isdir(stackp->ffs_filearray[i])) + continue; /* not a directory */ + +! /* prepare the filename to be checked for existence + * below */ + STRCPY(file_path, stackp->ffs_filearray[i]); + add_pathsep(file_path); +*************** +*** 5438,5444 **** + #if defined(MSWIN) || defined(MSDOS) || defined(OS2) + /* handle "\tmp" as absolute path */ + || vim_ispathsep(ff_file_to_find[0]) +! /* handle "c:name" as absulute path */ + || (ff_file_to_find[0] != NUL && ff_file_to_find[1] == ':') + #endif + #ifdef AMIGA +--- 5443,5449 ---- + #if defined(MSWIN) || defined(MSDOS) || defined(OS2) + /* handle "\tmp" as absolute path */ + || vim_ispathsep(ff_file_to_find[0]) +! /* handle "c:name" as absolute path */ + || (ff_file_to_find[0] != NUL && ff_file_to_find[1] == ':') + #endif + #ifdef AMIGA +*************** +*** 5681,5687 **** + p2 = (char_u *)base + (j + gap) * elm_size; + if ((*cmp)((void *)p1, (void *)p2) <= 0) + break; +! /* Exchange the elemets. */ + mch_memmove(buf, p1, elm_size); + mch_memmove(p1, p2, elm_size); + mch_memmove(p2, buf, elm_size); +--- 5686,5692 ---- + p2 = (char_u *)base + (j + gap) * elm_size; + if ((*cmp)((void *)p1, (void *)p2) <= 0) + break; +! /* Exchange the elements. */ + mch_memmove(buf, p1, elm_size); + mch_memmove(p1, p2, elm_size); + mch_memmove(p2, buf, elm_size); +*** ../vim-7.2.289/src/version.c 2009-11-11 16:23:37.000000000 +0100 +--- src/version.c 2009-11-11 16:54:53.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 290, + /**/ + +-- +ARTHUR: It is I, Arthur, son of Uther Pendragon, from the castle of Camelot. + King of all Britons, defeator of the Saxons, sovereign of all England! + [Pause] +SOLDIER: Get away! + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.291 b/source/ap/vim/patches/7.2.291 new file mode 100644 index 000000000..bab6e3bf8 --- /dev/null +++ b/source/ap/vim/patches/7.2.291 @@ -0,0 +1,53 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.291 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.291 +Problem: Reading uninitialised memory in arabic mode. +Solution: Use utfc_ptr2char_len() rather than utfc_ptr2char(). (Dominique + Pelle) +Files: src/screen.c + + +*** ../vim-7.2.290/src/screen.c 2009-11-03 17:36:09.000000000 +0100 +--- src/screen.c 2009-11-11 17:04:53.000000000 +0100 +*************** +*** 6413,6419 **** + } + else + { +! nc = utfc_ptr2char(ptr + mbyte_blen, pcc); + nc1 = pcc[0]; + } + pc = prev_c; +--- 6413,6420 ---- + } + else + { +! nc = utfc_ptr2char_len(ptr + mbyte_blen, pcc, +! (int)((text + len) - ptr - mbyte_blen)); + nc1 = pcc[0]; + } + pc = prev_c; +*** ../vim-7.2.290/src/version.c 2009-11-11 16:56:13.000000000 +0100 +--- src/version.c 2009-11-11 17:06:48.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 291, + /**/ + +-- +The problem with political jokes is that they get elected. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.292 b/source/ap/vim/patches/7.2.292 new file mode 100644 index 000000000..c57619042 --- /dev/null +++ b/source/ap/vim/patches/7.2.292 @@ -0,0 +1,55 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.292 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.292 +Problem: Block right-shift doesn't work properly with multi-byte encoding + and 'list' set. +Solution: Add the missing "else". (Lech Lorens) +Files: src/ops.c + + +*** ../vim-7.2.291/src/ops.c 2009-11-03 16:44:04.000000000 +0100 +--- src/ops.c 2009-11-11 17:15:04.000000000 +0100 +*************** +*** 422,429 **** + #ifdef FEAT_MBYTE + if (has_mbyte) + bd.textstart += (*mb_ptr2len)(bd.textstart); + #endif +! ++bd.textstart; + } + for ( ; vim_iswhite(*bd.textstart); ) + { +--- 422,430 ---- + #ifdef FEAT_MBYTE + if (has_mbyte) + bd.textstart += (*mb_ptr2len)(bd.textstart); ++ else + #endif +! ++bd.textstart; + } + for ( ; vim_iswhite(*bd.textstart); ) + { +*** ../vim-7.2.291/src/version.c 2009-11-11 17:07:25.000000000 +0100 +--- src/version.c 2009-11-11 17:21:31.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 292, + /**/ + +-- +Computers make very fast, very accurate, mistakes. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.293 b/source/ap/vim/patches/7.2.293 new file mode 100644 index 000000000..0f41435ad --- /dev/null +++ b/source/ap/vim/patches/7.2.293 @@ -0,0 +1,66 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.293 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.293 +Problem: When setting 'comments' option it may be used in a wrong way. +Solution: Don't increment after skipping over digets. (Yukihiro Nakadaira) +Files: src/misc1.c + + +*** ../vim-7.2.292/src/misc1.c 2009-11-03 18:46:53.000000000 +0100 +--- src/misc1.c 2009-11-11 17:27:38.000000000 +0100 +*************** +*** 1026,1037 **** + int c = 0; + int off = 0; + +! for (p = lead_flags; *p && *p != ':'; ++p) + { + if (*p == COM_RIGHT || *p == COM_LEFT) +! c = *p; + else if (VIM_ISDIGIT(*p) || *p == '-') + off = getdigits(&p); + } + if (c == COM_RIGHT) /* right adjusted leader */ + { +--- 1026,1039 ---- + int c = 0; + int off = 0; + +! for (p = lead_flags; *p != NUL && *p != ':'; ) + { + if (*p == COM_RIGHT || *p == COM_LEFT) +! c = *p++; + else if (VIM_ISDIGIT(*p) || *p == '-') + off = getdigits(&p); ++ else ++ ++p; + } + if (c == COM_RIGHT) /* right adjusted leader */ + { +*** ../vim-7.2.292/src/version.c 2009-11-11 17:22:30.000000000 +0100 +--- src/version.c 2009-11-11 17:29:24.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 293, + /**/ + +-- +SOLDIER: What? Ridden on a horse? +ARTHUR: Yes! +SOLDIER: You're using coconuts! + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.294 b/source/ap/vim/patches/7.2.294 new file mode 100644 index 000000000..fef1e6bfe --- /dev/null +++ b/source/ap/vim/patches/7.2.294 @@ -0,0 +1,285 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.294 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.294 +Problem: When using TEMPDIRS dir name could get too long. +Solution: Overwrite tail instead of appending each time. Use mkdtemp() when + available. (James Vega) +Files: src/auto/configure, src/config.h.in, src/configure.in, src/fileio.c + + +*** ../vim-7.2.293/src/auto/configure 2009-09-11 13:44:33.000000000 +0200 +--- src/auto/configure 2009-11-17 12:03:15.000000000 +0100 +*************** +*** 14019,14027 **** + + + + for ac_func in bcmp fchdir fchown fseeko fsync ftello getcwd getpseudotty \ + getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \ +! memset nanosleep opendir putenv qsort readlink select setenv \ + setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \ + sigvec strcasecmp strerror strftime stricmp strncasecmp \ + strnicmp strpbrk strtol tgetent towlower towupper iswupper \ +--- 14019,14028 ---- + + + ++ + for ac_func in bcmp fchdir fchown fseeko fsync ftello getcwd getpseudotty \ + getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \ +! memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \ + setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \ + sigvec strcasecmp strerror strftime stricmp strncasecmp \ + strnicmp strpbrk strtol tgetent towlower towupper iswupper \ +*** ../vim-7.2.293/src/config.h.in 2009-05-21 23:25:38.000000000 +0200 +--- src/config.h.in 2009-11-11 17:40:21.000000000 +0100 +*************** +*** 157,162 **** +--- 157,163 ---- + #undef HAVE_LSTAT + #undef HAVE_MEMCMP + #undef HAVE_MEMSET ++ #undef HAVE_MKDTEMP + #undef HAVE_NANOSLEEP + #undef HAVE_OPENDIR + #undef HAVE_FLOAT_FUNCS +*** ../vim-7.2.293/src/configure.in 2009-09-11 13:44:33.000000000 +0200 +--- src/configure.in 2009-11-11 17:40:21.000000000 +0100 +*************** +*** 2635,2641 **** + dnl Check for functions in one big call, to reduce the size of configure + AC_CHECK_FUNCS(bcmp fchdir fchown fseeko fsync ftello getcwd getpseudotty \ + getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \ +! memset nanosleep opendir putenv qsort readlink select setenv \ + setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \ + sigvec strcasecmp strerror strftime stricmp strncasecmp \ + strnicmp strpbrk strtol tgetent towlower towupper iswupper \ +--- 2635,2641 ---- + dnl Check for functions in one big call, to reduce the size of configure + AC_CHECK_FUNCS(bcmp fchdir fchown fseeko fsync ftello getcwd getpseudotty \ + getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \ +! memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \ + setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \ + sigvec strcasecmp strerror strftime stricmp strncasecmp \ + strnicmp strpbrk strtol tgetent towlower towupper iswupper \ +*** ../vim-7.2.293/src/fileio.c 2009-09-11 17:24:01.000000000 +0200 +--- src/fileio.c 2009-11-11 18:01:22.000000000 +0100 +*************** +*** 146,151 **** +--- 146,152 ---- + # endif + #endif + static int move_lines __ARGS((buf_T *frombuf, buf_T *tobuf)); ++ static void vim_settempdir __ARGS((char_u *tempdir)); + #ifdef FEAT_AUTOCMD + static char *e_auchangedbuf = N_("E812: Autocommands changed buffer or buffer name"); + #endif +*************** +*** 6987,6992 **** +--- 6988,7020 ---- + #endif + + /* ++ * Directory "tempdir" was created. Expand this name to a full path and put ++ * it in "vim_tempdir". This avoids that using ":cd" would confuse us. ++ * "tempdir" must be no longer than MAXPATHL. ++ */ ++ static void ++ vim_settempdir(tempdir) ++ char_u *tempdir; ++ { ++ char_u *buf; ++ ++ buf = alloc((unsigned)MAXPATHL + 2); ++ if (buf != NULL) ++ { ++ if (vim_FullName(tempdir, buf, MAXPATHL, FALSE) == FAIL) ++ STRCPY(buf, tempdir); ++ # ifdef __EMX__ ++ if (vim_strchr(buf, '/') != NULL) ++ STRCAT(buf, "/"); ++ else ++ # endif ++ add_pathsep(buf); ++ vim_tempdir = vim_strsave(buf); ++ vim_free(buf); ++ } ++ } ++ ++ /* + * vim_tempname(): Return a unique name that can be used for a temp file. + * + * The temp file is NOT created. +*************** +*** 7007,7014 **** + #ifdef TEMPDIRNAMES + static char *(tempdirs[]) = {TEMPDIRNAMES}; + int i; +- long nr; +- long off; + # ifndef EEXIST + struct stat st; + # endif +--- 7035,7040 ---- +*************** +*** 7027,7032 **** +--- 7053,7064 ---- + */ + for (i = 0; i < (int)(sizeof(tempdirs) / sizeof(char *)); ++i) + { ++ size_t itmplen; ++ # ifndef HAVE_MKDTEMP ++ long nr; ++ long off; ++ # endif ++ + /* expand $TMP, leave room for "/v1100000/999999999" */ + expand_env((char_u *)tempdirs[i], itmp, TEMPNAMELEN - 20); + if (mch_isdir(itmp)) /* directory exists */ +*************** +*** 7040,7046 **** +--- 7072,7085 ---- + else + # endif + add_pathsep(itmp); ++ itmplen = STRLEN(itmp); + ++ # ifdef HAVE_MKDTEMP ++ /* Leave room for filename */ ++ STRCAT(itmp, "vXXXXXX"); ++ if (mkdtemp((char *)itmp) != NULL) ++ vim_settempdir(itmp); ++ # else + /* Get an arbitrary number of up to 6 digits. When it's + * unlikely that it already exists it will be faster, + * otherwise it doesn't matter. The use of mkdir() avoids any +*************** +*** 7052,7110 **** + for (off = 0; off < 10000L; ++off) + { + int r; +! #if defined(UNIX) || defined(VMS) + mode_t umask_save; +! #endif + +! sprintf((char *)itmp + STRLEN(itmp), "v%ld", nr + off); +! # ifndef EEXIST + /* If mkdir() does not set errno to EEXIST, check for + * existing file here. There is a race condition then, + * although it's fail-safe. */ + if (mch_stat((char *)itmp, &st) >= 0) + continue; +! # endif +! #if defined(UNIX) || defined(VMS) + /* Make sure the umask doesn't remove the executable bit. + * "repl" has been reported to use "177". */ + umask_save = umask(077); +! #endif + r = vim_mkdir(itmp, 0700); +! #if defined(UNIX) || defined(VMS) + (void)umask(umask_save); +! #endif + if (r == 0) + { +! char_u *buf; +! +! /* Directory was created, use this name. +! * Expand to full path; When using the current +! * directory a ":cd" would confuse us. */ +! buf = alloc((unsigned)MAXPATHL + 1); +! if (buf != NULL) +! { +! if (vim_FullName(itmp, buf, MAXPATHL, FALSE) +! == FAIL) +! STRCPY(buf, itmp); +! # ifdef __EMX__ +! if (vim_strchr(buf, '/') != NULL) +! STRCAT(buf, "/"); +! else +! # endif +! add_pathsep(buf); +! vim_tempdir = vim_strsave(buf); +! vim_free(buf); +! } + break; + } +! # ifdef EEXIST + /* If the mkdir() didn't fail because the file/dir exists, + * we probably can't create any dir here, try another + * place. */ + if (errno != EEXIST) +! # endif + break; + } + if (vim_tempdir != NULL) + break; + } +--- 7091,7131 ---- + for (off = 0; off < 10000L; ++off) + { + int r; +! # if defined(UNIX) || defined(VMS) + mode_t umask_save; +! # endif + +! sprintf((char *)itmp + itmplen, "v%ld", nr + off); +! # ifndef EEXIST + /* If mkdir() does not set errno to EEXIST, check for + * existing file here. There is a race condition then, + * although it's fail-safe. */ + if (mch_stat((char *)itmp, &st) >= 0) + continue; +! # endif +! # if defined(UNIX) || defined(VMS) + /* Make sure the umask doesn't remove the executable bit. + * "repl" has been reported to use "177". */ + umask_save = umask(077); +! # endif + r = vim_mkdir(itmp, 0700); +! # if defined(UNIX) || defined(VMS) + (void)umask(umask_save); +! # endif + if (r == 0) + { +! vim_settempdir(itmp); + break; + } +! # ifdef EEXIST + /* If the mkdir() didn't fail because the file/dir exists, + * we probably can't create any dir here, try another + * place. */ + if (errno != EEXIST) +! # endif + break; + } ++ # endif /* HAVE_MKDTEMP */ + if (vim_tempdir != NULL) + break; + } +*** ../vim-7.2.293/src/version.c 2009-11-11 17:30:05.000000000 +0100 +--- src/version.c 2009-11-17 11:54:49.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 294, + /**/ + +-- +ARTHUR: Now stand aside worthy adversary. +BLACK KNIGHT: (Glancing at his shoulder) 'Tis but a scratch. +ARTHUR: A scratch? Your arm's off. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.295 b/source/ap/vim/patches/7.2.295 new file mode 100644 index 000000000..331498ffd --- /dev/null +++ b/source/ap/vim/patches/7.2.295 @@ -0,0 +1,142 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.295 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.295 +Problem: When using map() on a List the index is not known. +Solution: Set v:key to the index. (Hari Krishna Dara) +Files: runtime/doc/eval.txt, src/eval.c + + +*** ../vim-7.2.294/runtime/doc/eval.txt 2009-11-11 14:21:48.000000000 +0100 +--- runtime/doc/eval.txt 2009-11-11 18:22:54.000000000 +0100 +*************** +*** 3802,3808 **** + Replace each item in {expr} with the result of evaluating + {string}. + Inside {string} |v:val| has the value of the current item. +! For a |Dictionary| |v:key| has the key of the current item. + Example: > + :call map(mylist, '"> " . v:val . " <"') + < This puts "> " before and " <" after each item in "mylist". +--- 3812,3819 ---- + Replace each item in {expr} with the result of evaluating + {string}. + Inside {string} |v:val| has the value of the current item. +! For a |Dictionary| |v:key| has the key of the current item +! and for a |List| |v:key| has the index of the current item. + Example: > + :call map(mylist, '"> " . v:val . " <"') + < This puts "> " before and " <" after each item in "mylist". +*** ../vim-7.2.294/src/eval.c 2009-11-11 14:21:48.000000000 +0100 +--- src/eval.c 2009-11-11 18:22:49.000000000 +0100 +*************** +*** 9928,9933 **** +--- 9928,9934 ---- + int todo; + char_u *ermsg = map ? (char_u *)"map()" : (char_u *)"filter()"; + int save_did_emsg; ++ int index = 0; + + if (argvars[0].v_type == VAR_LIST) + { +*************** +*** 9961,9969 **** + save_did_emsg = did_emsg; + did_emsg = FALSE; + + if (argvars[0].v_type == VAR_DICT) + { +- prepare_vimvar(VV_KEY, &save_key); + vimvars[VV_KEY].vv_type = VAR_STRING; + + ht = &d->dv_hashtab; +--- 9962,9970 ---- + save_did_emsg = did_emsg; + did_emsg = FALSE; + ++ prepare_vimvar(VV_KEY, &save_key); + if (argvars[0].v_type == VAR_DICT) + { + vimvars[VV_KEY].vv_type = VAR_STRING; + + ht = &d->dv_hashtab; +*************** +*** 9987,10010 **** + } + } + hash_unlock(ht); +- +- restore_vimvar(VV_KEY, &save_key); + } + else + { + for (li = l->lv_first; li != NULL; li = nli) + { + if (tv_check_lock(li->li_tv.v_lock, ermsg)) + break; + nli = li->li_next; + if (filter_map_one(&li->li_tv, expr, map, &rem) == FAIL + || did_emsg) + break; + if (!map && rem) + listitem_remove(l, li); + } + } + + restore_vimvar(VV_VAL, &save_val); + + did_emsg |= save_did_emsg; +--- 9988,10014 ---- + } + } + hash_unlock(ht); + } + else + { ++ vimvars[VV_KEY].vv_type = VAR_NUMBER; ++ + for (li = l->lv_first; li != NULL; li = nli) + { + if (tv_check_lock(li->li_tv.v_lock, ermsg)) + break; + nli = li->li_next; ++ vimvars[VV_KEY].vv_nr = index; + if (filter_map_one(&li->li_tv, expr, map, &rem) == FAIL + || did_emsg) + break; + if (!map && rem) + listitem_remove(l, li); ++ ++index; + } + } + ++ restore_vimvar(VV_KEY, &save_key); + restore_vimvar(VV_VAL, &save_val); + + did_emsg |= save_did_emsg; +*** ../vim-7.2.294/src/version.c 2009-11-17 12:08:48.000000000 +0100 +--- src/version.c 2009-11-17 12:18:08.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 295, + /**/ + +-- +ARTHUR: You are indeed brave Sir knight, but the fight is mine. +BLACK KNIGHT: Had enough? +ARTHUR: You stupid bastard. You havn't got any arms left. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.296 b/source/ap/vim/patches/7.2.296 new file mode 100644 index 000000000..5fc3cb3c8 --- /dev/null +++ b/source/ap/vim/patches/7.2.296 @@ -0,0 +1,53 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.296 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.296 +Problem: Help message about startuptime is wrong. (Dominique Pelle) +Solution: Remove the equal sign. +Files: src/main.c + + +*** ../vim-7.2.295/src/main.c 2009-11-11 14:21:48.000000000 +0100 +--- src/main.c 2009-11-11 22:51:04.000000000 +0100 +*************** +*** 3151,3157 **** + main_msg(_("--servername <name>\tSend to/become the Vim server <name>")); + #endif + #ifdef STARTUPTIME +! main_msg(_("--startuptime=<file>\tWrite startup timing messages to <file>")); + #endif + #ifdef FEAT_VIMINFO + main_msg(_("-i <viminfo>\t\tUse <viminfo> instead of .viminfo")); +--- 3151,3157 ---- + main_msg(_("--servername <name>\tSend to/become the Vim server <name>")); + #endif + #ifdef STARTUPTIME +! main_msg(_("--startuptime <file>\tWrite startup timing messages to <file>")); + #endif + #ifdef FEAT_VIMINFO + main_msg(_("-i <viminfo>\t\tUse <viminfo> instead of .viminfo")); +*** ../vim-7.2.295/src/version.c 2009-11-17 12:20:30.000000000 +0100 +--- src/version.c 2009-11-17 12:30:29.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 296, + /**/ + +-- +BLACK KNIGHT: I'm invincible! +ARTHUR: You're a looney. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.297 b/source/ap/vim/patches/7.2.297 new file mode 100644 index 000000000..cc8d78994 --- /dev/null +++ b/source/ap/vim/patches/7.2.297 @@ -0,0 +1,70 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.297 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.297 +Problem: Reading freed memory when writing ":reg" output to a register. + (Dominique Pelle) +Solution: Skip the register being written to. +Files: src/ops.c + + +*** ../vim-7.2.296/src/ops.c 2009-11-11 17:22:30.000000000 +0100 +--- src/ops.c 2009-11-11 19:30:47.000000000 +0100 +*************** +*** 3991,3996 **** +--- 3991,4004 ---- + } + else + yb = &(y_regs[i]); ++ ++ #ifdef FEAT_EVAL ++ if (name == MB_TOLOWER(redir_reg) ++ || (redir_reg == '"' && yb == y_previous)) ++ continue; /* do not list register being written to, the ++ * pointer can be freed */ ++ #endif ++ + if (yb->y_array != NULL) + { + msg_putchar('\n'); +*************** +*** 6090,6096 **** + long maxlen; + #endif + +! if (y_ptr->y_array == NULL) /* NULL means emtpy register */ + y_ptr->y_size = 0; + + /* +--- 6098,6104 ---- + long maxlen; + #endif + +! if (y_ptr->y_array == NULL) /* NULL means empty register */ + y_ptr->y_size = 0; + + /* +*** ../vim-7.2.296/src/version.c 2009-11-17 12:31:30.000000000 +0100 +--- src/version.c 2009-11-17 12:42:28.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 297, + /**/ + +-- +"Beware of bugs in the above code; I have only proved +it correct, not tried it." -- Donald Knuth + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.298 b/source/ap/vim/patches/7.2.298 new file mode 100644 index 000000000..0aabd7acf --- /dev/null +++ b/source/ap/vim/patches/7.2.298 @@ -0,0 +1,48 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.298 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.298 +Problem: ":vimgrep" crashes when there is an autocommand that sets a + window-local variable. +Solution: Initialize the w: hashtab for re-use. (Yukihiro Nakadaira) +Files: src/fileio.c + + +*** ../vim-7.2.297/src/fileio.c 2009-11-17 12:08:48.000000000 +0100 +--- src/fileio.c 2009-11-17 13:22:06.000000000 +0100 +*************** +*** 8597,8602 **** +--- 8605,8611 ---- + curwin = firstwin; + # ifdef FEAT_EVAL + vars_clear(&aucmd_win->w_vars.dv_hashtab); /* free all w: variables */ ++ hash_init(&aucmd_win->w_vars.dv_hashtab); /* re-use the hashtab */ + # endif + #else + curwin = aco->save_curwin; +*** ../vim-7.2.297/src/version.c 2009-11-17 12:43:19.000000000 +0100 +--- src/version.c 2009-11-17 14:56:19.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 298, + /**/ + +-- +Eye have a spelling checker, it came with my PC; +It plainly marks four my revue mistakes I cannot sea. +I've run this poem threw it, I'm sure your please to no, +It's letter perfect in it's weigh, my checker tolled me sew! + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.299 b/source/ap/vim/patches/7.2.299 new file mode 100644 index 000000000..88f9e7055 --- /dev/null +++ b/source/ap/vim/patches/7.2.299 @@ -0,0 +1,54 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.299 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.299 +Problem: Crash when comment middle is longer than start. +Solution: Fix size computation. (Lech Lorens) +Files: src/misc1.c + + +*** ../vim-7.2.298/src/misc1.c 2009-11-11 17:30:05.000000000 +0100 +--- src/misc1.c 2009-11-17 15:59:28.000000000 +0100 +*************** +*** 1121,1127 **** + if (i != lead_repl_len) + { + mch_memmove(p + lead_repl_len, p + i, +! (size_t)(lead_len - i - (leader - p))); + lead_len += lead_repl_len - i; + } + } +--- 1121,1127 ---- + if (i != lead_repl_len) + { + mch_memmove(p + lead_repl_len, p + i, +! (size_t)(lead_len - i - (p - leader))); + lead_len += lead_repl_len - i; + } + } +*** ../vim-7.2.298/src/version.c 2009-11-17 14:57:19.000000000 +0100 +--- src/version.c 2009-11-17 16:01:07.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 299, + /**/ + +-- +BLACK KNIGHT: The Black Knight always triumphs. Have at you! + ARTHUR takes his last leg off. The BLACK KNIGHT's body lands upright. +BLACK KNIGHT: All right, we'll call it a draw. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.300 b/source/ap/vim/patches/7.2.300 new file mode 100644 index 000000000..f88035e67 --- /dev/null +++ b/source/ap/vim/patches/7.2.300 @@ -0,0 +1,201 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.300 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.300 +Problem: Vim doesn't close file descriptors when forking and executing + another command, e.g., ":shell". +Solution: Use FD_CLOEXEC when available. (James Vega) +Files: src/auto/configure, src/config.h.in, src/configure.in, + src/ex_cmdds2.c, src/fileio.c, src/memfile.c, src/memline.c + + +*** ../vim-7.2.299/src/auto/configure 2009-11-17 12:08:48.000000000 +0100 +--- src/auto/configure 2009-11-17 13:09:03.000000000 +0100 +*************** +*** 15174,15179 **** +--- 15174,15231 ---- + $as_echo "yes" >&6; } + fi + ++ { $as_echo "$as_me:$LINENO: checking for FD_CLOEXEC" >&5 ++ $as_echo_n "checking for FD_CLOEXEC... " >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++ /* confdefs.h. */ ++ _ACEOF ++ cat confdefs.h >>conftest.$ac_ext ++ cat >>conftest.$ac_ext <<_ACEOF ++ /* end confdefs.h. */ ++ #if HAVE_FCNTL_H ++ # include <fcntl.h> ++ #endif ++ int ++ main () ++ { ++ int flag = FD_CLOEXEC; ++ ; ++ return 0; ++ } ++ _ACEOF ++ rm -f conftest.$ac_objext ++ if { (ac_try="$ac_compile" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ { $as_echo "$as_me:$LINENO: result: yes" >&5 ++ $as_echo "yes" >&6; }; cat >>confdefs.h <<\_ACEOF ++ #define HAVE_FD_CLOEXEC 1 ++ _ACEOF ++ ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ { $as_echo "$as_me:$LINENO: result: not usable" >&5 ++ $as_echo "not usable" >&6; } ++ fi ++ ++ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ + { $as_echo "$as_me:$LINENO: checking for rename" >&5 + $as_echo_n "checking for rename... " >&6; } + cat >conftest.$ac_ext <<_ACEOF +*** ../vim-7.2.299/src/config.h.in 2009-11-17 12:08:48.000000000 +0100 +--- src/config.h.in 2009-11-17 13:01:36.000000000 +0100 +*************** +*** 388,390 **** +--- 388,393 ---- + + /* Define if you want XSMP interaction as well as vanilla swapfile safety */ + #undef USE_XSMP_INTERACT ++ ++ /* Define if fcntl()'s F_SETFD command knows about FD_CLOEXEC */ ++ #undef HAVE_FD_CLOEXEC +*** ../vim-7.2.299/src/configure.in 2009-11-17 12:08:48.000000000 +0100 +--- src/configure.in 2009-11-17 13:01:36.000000000 +0100 +*************** +*** 2855,2860 **** +--- 2855,2870 ---- + AC_MSG_RESULT(yes) + fi + ++ dnl make sure the FD_CLOEXEC flag for fcntl()'s F_SETFD command is known ++ AC_MSG_CHECKING(for FD_CLOEXEC) ++ AC_TRY_COMPILE( ++ [#if HAVE_FCNTL_H ++ # include <fcntl.h> ++ #endif], ++ [ int flag = FD_CLOEXEC;], ++ AC_MSG_RESULT(yes); AC_DEFINE(HAVE_FD_CLOEXEC), ++ AC_MSG_RESULT(not usable)) ++ + dnl rename needs to be checked separately to work on Nextstep with cc + AC_MSG_CHECKING(for rename) + AC_TRY_LINK([#include <stdio.h>], [rename("this", "that")], +*** ../vim-7.2.299/src/fileio.c 2009-11-17 14:57:19.000000000 +0100 +--- src/fileio.c 2009-11-17 13:22:06.000000000 +0100 +*************** +*** 2254,2259 **** +--- 2254,2267 ---- + + if (!read_buffer && !read_stdin) + close(fd); /* errors are ignored */ ++ #ifdef HAVE_FD_CLOEXEC ++ else ++ { ++ int fdflags = fcntl(fd, F_GETFD); ++ if (fdflags >= 0 && (fdflags & FD_CLOEXEC) == 0) ++ fcntl(fd, F_SETFD, fdflags | FD_CLOEXEC); ++ } ++ #endif + vim_free(buffer); + + #ifdef HAVE_DUP +*** ../vim-7.2.299/src/memfile.c 2008-07-13 19:39:39.000000000 +0200 +--- src/memfile.c 2009-11-17 13:22:15.000000000 +0100 +*************** +*** 1343,1348 **** +--- 1343,1353 ---- + } + else + { ++ #ifdef HAVE_FD_CLOEXEC ++ int fdflags = fcntl(mfp->mf_fd, F_GETFD); ++ if (fdflags >= 0 && (fdflags & FD_CLOEXEC) == 0) ++ fcntl(mfp->mf_fd, F_SETFD, fdflags | FD_CLOEXEC); ++ #endif + #ifdef HAVE_SELINUX + mch_copy_sec(fname, mfp->mf_fname); + #endif +*** ../vim-7.2.299/src/memline.c 2009-11-03 15:32:58.000000000 +0100 +--- src/memline.c 2009-11-17 13:21:40.000000000 +0100 +*************** +*** 382,388 **** + dp->db_index[0] = --dp->db_txt_start; /* at end of block */ + dp->db_free -= 1 + INDEX_SIZE; + dp->db_line_count = 1; +! *((char_u *)dp + dp->db_txt_start) = NUL; /* emtpy line */ + + return OK; + +--- 382,388 ---- + dp->db_index[0] = --dp->db_txt_start; /* at end of block */ + dp->db_free -= 1 + INDEX_SIZE; + dp->db_line_count = 1; +! *((char_u *)dp + dp->db_txt_start) = NUL; /* empty line */ + + return OK; + +*************** +*** 490,495 **** +--- 490,502 ---- + EMSG(_("E301: Oops, lost the swap file!!!")); + return; + } ++ #ifdef HAVE_FD_CLOEXEC ++ { ++ int fdflags = fcntl(mfp->mf_fd, F_GETFD); ++ if (fdflags >= 0 && (fdflags & FD_CLOEXEC) == 0) ++ fcntl(mfp->mf_fd, F_SETFD, fdflags | FD_CLOEXEC); ++ } ++ #endif + } + if (!success) + EMSG(_("E302: Could not rename swap file")); +*** ../vim-7.2.299/src/version.c 2009-11-17 16:08:12.000000000 +0100 +--- src/version.c 2009-11-17 17:09:43.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 300, + /**/ + +-- + | + +Ceci n'est pas une pipe. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.301 b/source/ap/vim/patches/7.2.301 new file mode 100644 index 000000000..e63cc088a --- /dev/null +++ b/source/ap/vim/patches/7.2.301 @@ -0,0 +1,777 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.301 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +NOTE: some mail and patch programs may have a problem with the non-ASCII +characters in this patch. You can fetch the patch from +ftp://ftp.vim.org/pub/vim/patches/7.2/7.2.301 and/or fetch the updated +files from CVS. http://www.vim.org/cvs.php + + +Patch 7.2.301 +Problem: Formatting is wrong when 'tw' is set to a small value. +Solution: Fix it and add tests. Also fix behavior of "1" in 'fo'. (Yukihiro + Nakadaira) +Files: src/edit.c, src/testdir/Makefile, src/testdir/test68.in, + src/testdir/test68.ok, src/testdir/test69.in, + src/testdir/test69.ok + + +*** ../vim-7.2.300/src/edit.c 2009-11-11 13:22:32.000000000 +0100 +--- src/edit.c 2009-11-17 15:34:47.000000000 +0100 +*************** +*** 181,187 **** + static void ins_ctrl_v __ARGS((void)); + static void undisplay_dollar __ARGS((void)); + static void insert_special __ARGS((int, int, int)); +! static void internal_format __ARGS((int textwidth, int second_indent, int flags, int format_only)); + static void check_auto_format __ARGS((int)); + static void redo_literal __ARGS((int c)); + static void start_arrow __ARGS((pos_T *end_insert_pos)); +--- 181,187 ---- + static void ins_ctrl_v __ARGS((void)); + static void undisplay_dollar __ARGS((void)); + static void insert_special __ARGS((int, int, int)); +! static void internal_format __ARGS((int textwidth, int second_indent, int flags, int format_only, int c)); + static void check_auto_format __ARGS((int)); + static void redo_literal __ARGS((int c)); + static void start_arrow __ARGS((pos_T *end_insert_pos)); +*************** +*** 2164,2170 **** + int i, c; + int actual_len; /* Take multi-byte characters */ + int actual_compl_length; /* into account. */ +! int *wca; /* Wide character array. */ + int has_lower = FALSE; + int was_letter = FALSE; + +--- 2164,2170 ---- + int i, c; + int actual_len; /* Take multi-byte characters */ + int actual_compl_length; /* into account. */ +! int *wca; /* Wide character array. */ + int has_lower = FALSE; + int was_letter = FALSE; + +*************** +*** 5558,5564 **** + } + if (do_internal) + #endif +! internal_format(textwidth, second_indent, flags, c == NUL); + } + + if (c == NUL) /* only formatting was wanted */ +--- 5558,5564 ---- + } + if (do_internal) + #endif +! internal_format(textwidth, second_indent, flags, c == NUL, c); + } + + if (c == NUL) /* only formatting was wanted */ +*************** +*** 5738,5748 **** + * Format text at the current insert position. + */ + static void +! internal_format(textwidth, second_indent, flags, format_only) + int textwidth; + int second_indent; + int flags; + int format_only; + { + int cc; + int save_char = NUL; +--- 5738,5749 ---- + * Format text at the current insert position. + */ + static void +! internal_format(textwidth, second_indent, flags, format_only, c) + int textwidth; + int second_indent; + int flags; + int format_only; ++ int c; /* character to be inserted (can be NUL) */ + { + int cc; + int save_char = NUL; +*************** +*** 5763,5769 **** + * When 'ai' is off we don't want a space under the cursor to be + * deleted. Replace it with an 'x' temporarily. + */ +! if (!curbuf->b_p_ai) + { + cc = gchar_cursor(); + if (vim_iswhite(cc)) +--- 5764,5774 ---- + * When 'ai' is off we don't want a space under the cursor to be + * deleted. Replace it with an 'x' temporarily. + */ +! if (!curbuf->b_p_ai +! #ifdef FEAT_VREPLACE +! && !(State & VREPLACE_FLAG) +! #endif +! ) + { + cc = gchar_cursor(); + if (vim_iswhite(cc)) +*************** +*** 5789,5797 **** + char_u *saved_text = NULL; + #endif + colnr_T col; + +! virtcol = get_nolist_virtcol(); +! if (virtcol < (colnr_T)textwidth) + break; + + #ifdef FEAT_COMMENTS +--- 5794,5804 ---- + char_u *saved_text = NULL; + #endif + colnr_T col; ++ colnr_T end_col; + +! virtcol = get_nolist_virtcol() +! + char2cells(c != NUL ? c : gchar_cursor()); +! if (virtcol <= (colnr_T)textwidth) + break; + + #ifdef FEAT_COMMENTS +*************** +*** 5831,5842 **** + coladvance((colnr_T)textwidth); + wantcol = curwin->w_cursor.col; + +! curwin->w_cursor.col = startcol - 1; +! #ifdef FEAT_MBYTE +! /* Correct cursor for multi-byte character. */ +! if (has_mbyte) +! mb_adjust_cursor(); +! #endif + foundcol = 0; + + /* +--- 5838,5844 ---- + coladvance((colnr_T)textwidth); + wantcol = curwin->w_cursor.col; + +! curwin->w_cursor.col = startcol; + foundcol = 0; + + /* +*************** +*** 5847,5857 **** + || curwin->w_cursor.lnum != Insstart.lnum + || curwin->w_cursor.col >= Insstart.col) + { +! cc = gchar_cursor(); + if (WHITECHAR(cc)) + { + /* remember position of blank just before text */ +! end_foundcol = curwin->w_cursor.col; + + /* find start of sequence of blanks */ + while (curwin->w_cursor.col > 0 && WHITECHAR(cc)) +--- 5849,5862 ---- + || curwin->w_cursor.lnum != Insstart.lnum + || curwin->w_cursor.col >= Insstart.col) + { +! if (curwin->w_cursor.col == startcol && c != NUL) +! cc = c; +! else +! cc = gchar_cursor(); + if (WHITECHAR(cc)) + { + /* remember position of blank just before text */ +! end_col = curwin->w_cursor.col; + + /* find start of sequence of blanks */ + while (curwin->w_cursor.col > 0 && WHITECHAR(cc)) +*************** +*** 5871,5877 **** + /* do not break after one-letter words */ + if (curwin->w_cursor.col == 0) + break; /* one-letter word at begin */ +! + col = curwin->w_cursor.col; + dec_cursor(); + cc = gchar_cursor(); +--- 5876,5886 ---- + /* do not break after one-letter words */ + if (curwin->w_cursor.col == 0) + break; /* one-letter word at begin */ +! #ifdef FEAT_COMMENTS +! /* do not break "#a b" when 'tw' is 2 */ +! if (curwin->w_cursor.col <= leader_len) +! break; +! #endif + col = curwin->w_cursor.col; + dec_cursor(); + cc = gchar_cursor(); +*************** +*** 5880,5905 **** + continue; /* one-letter, continue */ + curwin->w_cursor.col = col; + } +! #ifdef FEAT_MBYTE +! if (has_mbyte) +! foundcol = curwin->w_cursor.col +! + (*mb_ptr2len)(ml_get_cursor()); +! else +! #endif +! foundcol = curwin->w_cursor.col + 1; +! if (curwin->w_cursor.col < (colnr_T)wantcol) + break; + } + #ifdef FEAT_MBYTE +! else if (cc >= 0x100 && fo_multibyte +! && curwin->w_cursor.col <= (colnr_T)wantcol) + { + /* Break after or before a multi-byte character. */ + foundcol = curwin->w_cursor.col; +- if (curwin->w_cursor.col < (colnr_T)wantcol) +- foundcol += (*mb_char2len)(cc); + end_foundcol = foundcol; +! break; + } + #endif + if (curwin->w_cursor.col == 0) +--- 5889,5948 ---- + continue; /* one-letter, continue */ + curwin->w_cursor.col = col; + } +! +! inc_cursor(); +! +! end_foundcol = end_col + 1; +! foundcol = curwin->w_cursor.col; +! if (curwin->w_cursor.col <= (colnr_T)wantcol) + break; + } + #ifdef FEAT_MBYTE +! else if (cc >= 0x100 && fo_multibyte) + { + /* Break after or before a multi-byte character. */ ++ if (curwin->w_cursor.col != startcol) ++ { ++ #ifdef FEAT_COMMENTS ++ /* Don't break until after the comment leader */ ++ if (curwin->w_cursor.col < leader_len) ++ break; ++ #endif ++ col = curwin->w_cursor.col; ++ inc_cursor(); ++ /* Don't change end_foundcol if already set. */ ++ if (foundcol != curwin->w_cursor.col) ++ { ++ foundcol = curwin->w_cursor.col; ++ end_foundcol = foundcol; ++ if (curwin->w_cursor.col <= (colnr_T)wantcol) ++ break; ++ } ++ curwin->w_cursor.col = col; ++ } ++ ++ if (curwin->w_cursor.col == 0) ++ break; ++ ++ col = curwin->w_cursor.col; ++ ++ dec_cursor(); ++ cc = gchar_cursor(); ++ ++ if (WHITECHAR(cc)) ++ continue; /* break with space */ ++ #ifdef FEAT_COMMENTS ++ /* Don't break until after the comment leader */ ++ if (curwin->w_cursor.col < leader_len) ++ break; ++ #endif ++ ++ curwin->w_cursor.col = col; ++ + foundcol = curwin->w_cursor.col; + end_foundcol = foundcol; +! if (curwin->w_cursor.col <= (colnr_T)wantcol) +! break; + } + #endif + if (curwin->w_cursor.col == 0) +*************** +*** 5926,5939 **** + orig_col = startcol; /* Will start backspacing from here */ + else + #endif +! replace_offset = startcol - end_foundcol - 1; + + /* + * adjust startcol for spaces that will be deleted and + * characters that will remain on top line + */ + curwin->w_cursor.col = foundcol; +! while (cc = gchar_cursor(), WHITECHAR(cc)) + inc_cursor(); + startcol -= curwin->w_cursor.col; + if (startcol < 0) +--- 5969,5983 ---- + orig_col = startcol; /* Will start backspacing from here */ + else + #endif +! replace_offset = startcol - end_foundcol; + + /* + * adjust startcol for spaces that will be deleted and + * characters that will remain on top line + */ + curwin->w_cursor.col = foundcol; +! while ((cc = gchar_cursor(), WHITECHAR(cc)) +! && (!fo_white_par || curwin->w_cursor.col < startcol)) + inc_cursor(); + startcol -= curwin->w_cursor.col; + if (startcol < 0) +*************** +*** 8509,8515 **** + if (mode == BACKSPACE_LINE + && (curbuf->b_p_ai + #ifdef FEAT_CINDENT +! || cindent_on() + #endif + ) + #ifdef FEAT_RIGHTLEFT +--- 8553,8559 ---- + if (mode == BACKSPACE_LINE + && (curbuf->b_p_ai + #ifdef FEAT_CINDENT +! || cindent_on() + #endif + ) + #ifdef FEAT_RIGHTLEFT +*** ../vim-7.2.300/src/testdir/Makefile 2009-11-17 17:36:13.000000000 +0100 +--- src/testdir/Makefile 2009-11-17 15:11:26.000000000 +0100 +*************** +*** 22,28 **** + test48.out test49.out test51.out test52.out test53.out \ + test54.out test55.out test56.out test57.out test58.out \ + test59.out test60.out test61.out test62.out test63.out \ +! test64.out test65.out test66.out test67.out + + SCRIPTS_GUI = test16.out + +--- 22,29 ---- + test48.out test49.out test51.out test52.out test53.out \ + test54.out test55.out test56.out test57.out test58.out \ + test59.out test60.out test61.out test62.out test63.out \ +! test64.out test65.out test66.out test67.out test68.out \ +! test69.out + + SCRIPTS_GUI = test16.out + +*** ../vim-7.2.300/src/testdir/test68.in 2009-11-17 17:39:36.000000000 +0100 +--- src/testdir/test68.in 2009-11-17 15:39:09.000000000 +0100 +*************** +*** 0 **** +--- 1,56 ---- ++ Test for text formatting. ++ ++ Results of test68: ++ ++ STARTTEST ++ :so small.vim ++ /^{/+1 ++ :set noai tw=2 fo=t ++ gRa b ++ ENDTEST ++ ++ { ++ ++ ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set ai tw=2 fo=tw ++ gqgqjjllab ++ ENDTEST ++ ++ { ++ a b ++ ++ a ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set tw=3 fo=t ++ gqgqo ++ a ++ ENDTEST ++ ++ { ++ a ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set tw=2 fo=tcq1 comments=:# ++ gqgqjgqgqo ++ a b ++ #a b ++ ENDTEST ++ ++ { ++ a b ++ #a b ++ } ++ ++ STARTTEST ++ :g/^STARTTEST/.,/^ENDTEST/d ++ :1;/^Results/,$wq! test.out ++ ENDTEST +*** ../vim-7.2.300/src/testdir/test68.ok 2009-11-17 17:39:36.000000000 +0100 +--- src/testdir/test68.ok 2009-11-17 15:11:26.000000000 +0100 +*************** +*** 0 **** +--- 1,35 ---- ++ Results of test68: ++ ++ ++ { ++ a ++ b ++ } ++ ++ ++ { ++ a ++ b ++ ++ a ++ b ++ } ++ ++ ++ { ++ a ++ ++ ++ a ++ ++ } ++ ++ ++ { ++ a b ++ #a b ++ ++ a b ++ #a b ++ } ++ +*** ../vim-7.2.300/src/testdir/test69.in 2009-11-17 17:39:36.000000000 +0100 +--- src/testdir/test69.in 2009-11-17 15:11:26.000000000 +0100 +*************** +*** 0 **** +--- 1,139 ---- ++ Test for multi-byte text formatting. ++ ++ STARTTEST ++ :so mbyte.vim ++ :set encoding=utf-8 ++ ENDTEST ++ ++ Results of test69: ++ ++ STARTTEST ++ /^{/+1 ++ :set tw=2 fo=t ++ gqgqjgqgqo ++ XYZ ++ abc XYZ ++ ENDTEST ++ ++ { ++ XYZ ++ abc XYZ ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set tw=1 fo=tm ++ gqgqjgqgqjgqgqjgqgqjgqgqo ++ X ++ Xa ++ X a ++ XY ++ X Y ++ ENDTEST ++ ++ { ++ X ++ Xa ++ X a ++ XY ++ X Y ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set tw=2 fo=tm ++ gqgqjgqgqjgqgqjgqgqjgqgqjgqgqjgqgqjgqgqjgqgqjgqgqo ++ X ++ Xa ++ X a ++ XY ++ X Y ++ aX ++ abX ++ abcX ++ abX c ++ abXY ++ ENDTEST ++ ++ { ++ X ++ Xa ++ X a ++ XY ++ X Y ++ aX ++ abX ++ abcX ++ abX c ++ abXY ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set ai tw=2 fo=tm ++ gqgqjgqgqo ++ X ++ Xa ++ ENDTEST ++ ++ { ++ X ++ Xa ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set noai tw=2 fo=tm ++ gqgqjgqgqo ++ X ++ Xa ++ ENDTEST ++ ++ { ++ X ++ Xa ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set tw=2 fo=cqm comments=n:X ++ gqgqjgqgqjgqgqjgqgqjgqgqjgqgqjgqgqjgqgqjgqgqjgqgqo ++ X ++ Xa ++ XaY ++ XY ++ XYZ ++ X Y ++ X YZ ++ XX ++ XXa ++ XXY ++ ENDTEST ++ ++ { ++ X ++ Xa ++ XaY ++ XY ++ XYZ ++ X Y ++ X YZ ++ XX ++ XXa ++ XXY ++ } ++ ++ STARTTEST ++ /^{/+1 ++ :set tw=2 fo=tm ++ RXa ++ ENDTEST ++ ++ { ++ ++ } ++ ++ STARTTEST ++ :g/^STARTTEST/.,/^ENDTEST/d ++ :1;/^Results/,$wq! test.out ++ ENDTEST +*** ../vim-7.2.300/src/testdir/test69.ok 2009-11-17 17:39:36.000000000 +0100 +--- src/testdir/test69.ok 2009-11-17 15:11:26.000000000 +0100 +*************** +*** 0 **** +--- 1,142 ---- ++ Results of test69: ++ ++ ++ { ++ XYZ ++ abc ++ XYZ ++ ++ XYZ ++ abc ++ XYZ ++ } ++ ++ ++ { ++ X ++ X ++ a ++ X ++ a ++ X ++ Y ++ X ++ Y ++ ++ X ++ X ++ a ++ X ++ a ++ X ++ Y ++ X ++ Y ++ } ++ ++ ++ { ++ X ++ X ++ a ++ X ++ a ++ X ++ Y ++ X ++ Y ++ a ++ X ++ ab ++ X ++ abc ++ X ++ ab ++ X ++ c ++ ab ++ X ++ Y ++ ++ X ++ X ++ a ++ X ++ a ++ X ++ Y ++ X ++ Y ++ a ++ X ++ ab ++ X ++ abc ++ X ++ ab ++ X ++ c ++ ab ++ X ++ Y ++ } ++ ++ ++ { ++ X ++ X ++ a ++ ++ X ++ X ++ a ++ } ++ ++ ++ { ++ X ++ X ++ a ++ ++ X ++ X ++ a ++ } ++ ++ ++ { ++ X ++ Xa ++ Xa ++ XY ++ XY ++ XY ++ XZ ++ X Y ++ X Y ++ X Z ++ XX ++ XXa ++ XXY ++ ++ X ++ Xa ++ Xa ++ XY ++ XY ++ XY ++ XZ ++ X Y ++ X Y ++ X Z ++ XX ++ XXa ++ XXY ++ } ++ ++ ++ { ++ X ++ a ++ } ++ +*** ../vim-7.2.300/src/version.c 2009-11-17 17:37:34.000000000 +0100 +--- src/version.c 2009-11-17 17:26:35.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 301, + /**/ diff --git a/source/ap/vim/patches/7.2.302 b/source/ap/vim/patches/7.2.302 new file mode 100644 index 000000000..c4d5a99d9 --- /dev/null +++ b/source/ap/vim/patches/7.2.302 @@ -0,0 +1,140 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.302 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.302 (extra part of 7.2.301) +Problem: Formatting wrong with small 'tw' value. +Solution: Add build rules for tests. +Files: src/testdir/Make_amiga.mak, src/testdir/Make_dos.mak, + src/testdir/Make_ming.mak, src/testdir/Make_os2.mak, + src/testdir/Make_vms.mms + + +*** ../vim-7.2.301/src/testdir/Make_amiga.mak 2009-09-18 14:58:26.000000000 +0200 +--- src/testdir/Make_amiga.mak 2009-11-17 15:29:05.000000000 +0100 +*************** +*** 26,32 **** + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test58.out test59.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out + + .SUFFIXES: .in .out + +--- 26,32 ---- + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test58.out test59.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out test68.out test69.out + + .SUFFIXES: .in .out + +*************** +*** 113,115 **** +--- 113,117 ---- + test65.out: test65.in + test66.out: test66.in + test67.out: test67.in ++ test68.out: test68.in ++ test69.out: test69.in +*** ../vim-7.2.301/src/testdir/Make_dos.mak 2009-09-18 14:58:26.000000000 +0200 +--- src/testdir/Make_dos.mak 2009-11-17 15:29:54.000000000 +0100 +*************** +*** 26,32 **** + test15.out test17.out test18.out test21.out test26.out \ + test30.out test31.out test32.out test33.out test34.out \ + test37.out test38.out test39.out test40.out test41.out \ +! test42.out test52.out test65.out test66.out test67.out + + SCRIPTS32 = test50.out + +--- 26,33 ---- + test15.out test17.out test18.out test21.out test26.out \ + test30.out test31.out test32.out test33.out test34.out \ + test37.out test38.out test39.out test40.out test41.out \ +! test42.out test52.out test65.out test66.out test67.out \ +! test68.out test69.out + + SCRIPTS32 = test50.out + +*** ../vim-7.2.301/src/testdir/Make_ming.mak 2009-09-18 14:58:26.000000000 +0200 +--- src/testdir/Make_ming.mak 2009-11-17 15:30:07.000000000 +0100 +*************** +*** 45,51 **** + test15.out test17.out test18.out test21.out test26.out \ + test30.out test31.out test32.out test33.out test34.out \ + test37.out test38.out test39.out test40.out test41.out \ +! test42.out test52.out test65.out test66.out test67.out + + SCRIPTS32 = test50.out + +--- 45,52 ---- + test15.out test17.out test18.out test21.out test26.out \ + test30.out test31.out test32.out test33.out test34.out \ + test37.out test38.out test39.out test40.out test41.out \ +! test42.out test52.out test65.out test66.out test67.out \ +! test68.out test69.out + + SCRIPTS32 = test50.out + +*** ../vim-7.2.301/src/testdir/Make_os2.mak 2009-09-18 14:58:26.000000000 +0200 +--- src/testdir/Make_os2.mak 2009-11-17 15:11:26.000000000 +0100 +*************** +*** 26,32 **** + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test58.out test59.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out + + .SUFFIXES: .in .out + +--- 26,32 ---- + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test58.out test59.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out test68.out test69.out + + .SUFFIXES: .in .out + +*** ../vim-7.2.301/src/testdir/Make_vms.mms 2009-09-18 14:58:26.000000000 +0200 +--- src/testdir/Make_vms.mms 2009-11-17 15:11:26.000000000 +0100 +*************** +*** 69,75 **** + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out + + .IFDEF WANT_GUI + SCRIPT_GUI = test16.out +--- 69,75 ---- + test48.out test51.out test53.out test54.out test55.out \ + test56.out test57.out test60.out \ + test61.out test62.out test63.out test64.out test65.out \ +! test66.out test67.out test68.out test69.out + + .IFDEF WANT_GUI + SCRIPT_GUI = test16.out +*** ../vim-7.2.301/src/version.c 2009-11-17 17:40:34.000000000 +0100 +--- src/version.c 2009-11-17 17:43:26.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 302, + /**/ + +-- +Hacker: Someone skilled in computer programming (good guy). +Cracker: A hacker that uses his skills to crack software (bad guy). + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.303 b/source/ap/vim/patches/7.2.303 new file mode 100644 index 000000000..b53d19810 --- /dev/null +++ b/source/ap/vim/patches/7.2.303 @@ -0,0 +1,70 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.303 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.303 (after 7.2.294) +Problem: Can't build on MS-Windows. +Solution: Add #ifdef around vim_settempdir(). (James Vega) +Files: src/fileio.c + + +*** ../vim-7.2.302/src/fileio.c 2009-11-17 17:13:03.000000000 +0100 +--- src/fileio.c 2009-11-18 20:06:55.000000000 +0100 +*************** +*** 146,152 **** +--- 146,154 ---- + # endif + #endif + static int move_lines __ARGS((buf_T *frombuf, buf_T *tobuf)); ++ #ifdef TEMPDIRNAMES + static void vim_settempdir __ARGS((char_u *tempdir)); ++ #endif + #ifdef FEAT_AUTOCMD + static char *e_auchangedbuf = N_("E812: Autocommands changed buffer or buffer name"); + #endif +*************** +*** 6995,7000 **** +--- 6997,7003 ---- + } + #endif + ++ #ifdef TEMPDIRNAMES + /* + * Directory "tempdir" was created. Expand this name to a full path and put + * it in "vim_tempdir". This avoids that using ":cd" would confuse us. +*************** +*** 7021,7026 **** +--- 7024,7030 ---- + vim_free(buf); + } + } ++ #endif + + /* + * vim_tempname(): Return a unique name that can be used for a temp file. +*** ../vim-7.2.302/src/version.c 2009-11-17 17:57:10.000000000 +0100 +--- src/version.c 2009-11-18 20:07:58.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 303, + /**/ + +-- +BEDEVERE: Why do you think she is a witch? +SECOND VILLAGER: She turned me into a newt. +BEDEVERE: A newt? +SECOND VILLAGER: (After looking at himself for some time) I got better. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.304 b/source/ap/vim/patches/7.2.304 new file mode 100644 index 000000000..8a138c046 --- /dev/null +++ b/source/ap/vim/patches/7.2.304 @@ -0,0 +1,58 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.304 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.304 +Problem: Compiler warning for bad pointer cast. +Solution: Use another variable for int pointer. +Files: src/ops.c + + +*** ../vim-7.2.303/src/ops.c 2009-11-17 12:43:19.000000000 +0100 +--- src/ops.c 2009-11-18 15:40:26.000000000 +0100 +*************** +*** 5597,5603 **** + vc.vc_type = CONV_NONE; + if (convert_setup(&vc, p_enc, (char_u *)"latin1") == OK) + { +! conv_str = string_convert(&vc, str, (int*)&len); + if (conv_str != NULL) + { + vim_free(str); +--- 5597,5606 ---- + vc.vc_type = CONV_NONE; + if (convert_setup(&vc, p_enc, (char_u *)"latin1") == OK) + { +! int intlen = len; +! +! conv_str = string_convert(&vc, str, &intlen); +! len = intlen; + if (conv_str != NULL) + { + vim_free(str); +*** ../vim-7.2.303/src/version.c 2009-11-18 20:12:15.000000000 +0100 +--- src/version.c 2009-11-25 12:37:36.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 304, + /**/ + +-- +I recommend ordering large cargo containers of paper towels to make up +whatever budget underruns you have. Paper products are always useful and they +have the advantage of being completely flushable if you need to make room in +the storage area later. + (Scott Adams - The Dilbert principle) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.305 b/source/ap/vim/patches/7.2.305 new file mode 100644 index 000000000..c8ad7084b --- /dev/null +++ b/source/ap/vim/patches/7.2.305 @@ -0,0 +1,105 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.305 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.305 +Problem: Recursively redrawing causes a memory leak. (Dominique Pelle) +Solution: Disallow recursive screen updating. +Files: src/screen.c + + +*** ../vim-7.2.304/src/screen.c 2009-11-11 17:07:25.000000000 +0100 +--- src/screen.c 2009-11-17 16:30:53.000000000 +0100 +*************** +*** 323,328 **** +--- 323,329 ---- + int did_one; + #endif + ++ /* Don't do anything if the screen structures are (not yet) valid. */ + if (!screen_valid(TRUE)) + return; + +*************** +*** 342,348 **** + if (curwin->w_lines_valid == 0 && type < NOT_VALID) + type = NOT_VALID; + +! if (!redrawing()) + { + redraw_later(type); /* remember type for next time */ + must_redraw = type; +--- 343,351 ---- + if (curwin->w_lines_valid == 0 && type < NOT_VALID) + type = NOT_VALID; + +! /* Postpone the redrawing when it's not needed and when being called +! * recursively. */ +! if (!redrawing() || updating_screen) + { + redraw_later(type); /* remember type for next time */ + must_redraw = type; +*************** +*** 582,587 **** +--- 585,591 ---- + + /* + * Prepare for updating one or more windows. ++ * Caller must check for "updating_screen" already set to avoid recursiveness. + */ + static void + update_prepare() +*************** +*** 663,669 **** + doit = TRUE; + } + +! if (!doit) + return; + + /* update all windows that need updating */ +--- 667,675 ---- + doit = TRUE; + } + +! /* Return when there is nothing to do or screen updating already +! * happening. */ +! if (!doit || updating_screen) + return; + + /* update all windows that need updating */ +*************** +*** 696,701 **** +--- 702,711 ---- + updateWindow(wp) + win_T *wp; + { ++ /* return if already busy updating */ ++ if (updating_screen) ++ return; ++ + update_prepare(); + + #ifdef FEAT_CLIPBOARD +*** ../vim-7.2.304/src/version.c 2009-11-25 12:38:49.000000000 +0100 +--- src/version.c 2009-11-25 13:01:48.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 305, + /**/ + +-- +If the Universe is constantly expanding, why can't I ever find a parking space? + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.306 b/source/ap/vim/patches/7.2.306 new file mode 100644 index 000000000..d54e90d36 --- /dev/null +++ b/source/ap/vim/patches/7.2.306 @@ -0,0 +1,48 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.306 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.306 +Problem: shellescape("10%%", 1) only escapes first %. (Christian Brabandt) +Solution: Don't copy the character after the escaped one. +Files: src/misc2.c + + +*** ../vim-7.2.305/src/misc2.c 2009-11-11 16:56:13.000000000 +0100 +--- src/misc2.c 2009-11-25 17:11:49.000000000 +0100 +*************** +*** 1390,1395 **** +--- 1390,1396 ---- + *d++ = '\\'; /* insert backslash */ + while (--l >= 0) /* copy the var */ + *d++ = *p++; ++ continue; + } + + MB_COPY_CHAR(p, d); +*** ../vim-7.2.305/src/version.c 2009-11-25 13:03:29.000000000 +0100 +--- src/version.c 2009-11-25 17:13:54.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 306, + /**/ + +-- +Article in the first Free Software Magazine: "Bram Moolenaar studied electrical +engineering at the Technical University of Delft and graduated in 1985 on a +multi-processor Unix architecture." +Response by "dimator": Could the school not afford a proper stage for the +ceremony? + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.307 b/source/ap/vim/patches/7.2.307 new file mode 100644 index 000000000..23504e2c4 --- /dev/null +++ b/source/ap/vim/patches/7.2.307 @@ -0,0 +1,181 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.307 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.307 +Problem: Crash with a very long syntax match statement. (Guy Gur Ari) +Solution: When the offset does not fit in the two bytes available give an + error instead of continuing with invalid pointers. +Files: src/regexp.c + + +*** ../vim-7.2.306/src/regexp.c 2009-05-15 21:31:11.000000000 +0200 +--- src/regexp.c 2009-11-25 18:13:03.000000000 +0100 +*************** +*** 583,588 **** +--- 583,589 ---- + #endif + static char_u *regcode; /* Code-emit pointer, or JUST_CALC_SIZE */ + static long regsize; /* Code size. */ ++ static int reg_toolong; /* TRUE when offset out of range */ + static char_u had_endbrace[NSUBEXP]; /* flags, TRUE if end of () found */ + static unsigned regflags; /* RF_ flags for prog */ + static long brace_min[10]; /* Minimums for complex brace repeats */ +*************** +*** 1028,1036 **** + regcomp_start(expr, re_flags); + regcode = r->program; + regc(REGMAGIC); +! if (reg(REG_NOPAREN, &flags) == NULL) + { + vim_free(r); + return NULL; + } + +--- 1029,1039 ---- + regcomp_start(expr, re_flags); + regcode = r->program; + regc(REGMAGIC); +! if (reg(REG_NOPAREN, &flags) == NULL || reg_toolong) + { + vim_free(r); ++ if (reg_toolong) ++ EMSG_RET_NULL(_("E339: Pattern too long")); + return NULL; + } + +*************** +*** 1141,1146 **** +--- 1144,1150 ---- + re_has_z = 0; + #endif + regsize = 0L; ++ reg_toolong = FALSE; + regflags = 0; + #if defined(FEAT_SYN_HL) || defined(PROTO) + had_eol = FALSE; +*************** +*** 1228,1234 **** + { + skipchr(); + br = regbranch(&flags); +! if (br == NULL) + return NULL; + regtail(ret, br); /* BRANCH -> BRANCH. */ + if (!(flags & HASWIDTH)) +--- 1232,1238 ---- + { + skipchr(); + br = regbranch(&flags); +! if (br == NULL || reg_toolong) + return NULL; + regtail(ret, br); /* BRANCH -> BRANCH. */ + if (!(flags & HASWIDTH)) +*************** +*** 1313,1318 **** +--- 1317,1324 ---- + break; + skipchr(); + regtail(latest, regnode(END)); /* operand ends */ ++ if (reg_toolong) ++ break; + reginsert(MATCH, latest); + chain = latest; + } +*************** +*** 1382,1388 **** + break; + default: + latest = regpiece(&flags); +! if (latest == NULL) + return NULL; + *flagp |= flags & (HASWIDTH | HASNL | HASLOOKBH); + if (chain == NULL) /* First piece. */ +--- 1388,1394 ---- + break; + default: + latest = regpiece(&flags); +! if (latest == NULL || reg_toolong) + return NULL; + *flagp |= flags & (HASWIDTH | HASNL | HASLOOKBH); + if (chain == NULL) /* First piece. */ +*************** +*** 2540,2547 **** + offset = (int)(scan - val); + else + offset = (int)(val - scan); +! *(scan + 1) = (char_u) (((unsigned)offset >> 8) & 0377); +! *(scan + 2) = (char_u) (offset & 0377); + } + + /* +--- 2546,2561 ---- + offset = (int)(scan - val); + else + offset = (int)(val - scan); +! /* When the offset uses more than 16 bits it can no longer fit in the two +! * bytes avaliable. Use a global flag to avoid having to check return +! * values in too many places. */ +! if (offset > 0xffff) +! reg_toolong = TRUE; +! else +! { +! *(scan + 1) = (char_u) (((unsigned)offset >> 8) & 0377); +! *(scan + 2) = (char_u) (offset & 0377); +! } + } + + /* +*************** +*** 5764,5769 **** +--- 5778,5785 ---- + + /* + * regnext - dig the "next" pointer out of a node ++ * Returns NULL when calculating size, when there is no next item and when ++ * there is an error. + */ + static char_u * + regnext(p) +*************** +*** 5771,5777 **** + { + int offset; + +! if (p == JUST_CALC_SIZE) + return NULL; + + offset = NEXT(p); +--- 5787,5793 ---- + { + int offset; + +! if (p == JUST_CALC_SIZE || reg_toolong) + return NULL; + + offset = NEXT(p); +*** ../vim-7.2.306/src/version.c 2009-11-25 17:15:16.000000000 +0100 +--- src/version.c 2009-11-25 18:14:32.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 307, + /**/ + +-- +The fastest way to get an engineer to solve a problem is to declare that the +problem is unsolvable. No engineer can walk away from an unsolvable problem +until it's solved. + (Scott Adams - The Dilbert principle) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.308 b/source/ap/vim/patches/7.2.308 new file mode 100644 index 000000000..1e19b21dc --- /dev/null +++ b/source/ap/vim/patches/7.2.308 @@ -0,0 +1,182 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.308 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.308 +Problem: When using a regexp in the "\=" expression of a substitute + command, submatch() returns empty strings for further lines. + (Clockwork Jam) +Solution: Save and restore the line number and line count when calling + reg_getline(). +Files: src/regexp.c + + +*** ../vim-7.2.307/src/regexp.c 2009-11-25 18:21:48.000000000 +0100 +--- src/regexp.c 2009-11-25 19:45:07.000000000 +0100 +*************** +*** 6828,6833 **** +--- 6828,6835 ---- + * that contains a call to substitute() and submatch(). */ + static regmatch_T *submatch_match; + static regmmatch_T *submatch_mmatch; ++ static linenr_T submatch_firstlnum; ++ static linenr_T submatch_maxline; + #endif + + #if defined(FEAT_MODIFY_FNAME) || defined(FEAT_EVAL) || defined(PROTO) +*************** +*** 6941,6947 **** + } + else + { +- linenr_T save_reg_maxline; + win_T *save_reg_win; + int save_ireg_ic; + +--- 6943,6948 ---- +*************** +*** 6953,6959 **** + * vim_regexec_multi() can't be called recursively. */ + submatch_match = reg_match; + submatch_mmatch = reg_mmatch; +! save_reg_maxline = reg_maxline; + save_reg_win = reg_win; + save_ireg_ic = ireg_ic; + can_f_submatch = TRUE; +--- 6954,6961 ---- + * vim_regexec_multi() can't be called recursively. */ + submatch_match = reg_match; + submatch_mmatch = reg_mmatch; +! submatch_firstlnum = reg_firstlnum; +! submatch_maxline = reg_maxline; + save_reg_win = reg_win; + save_ireg_ic = ireg_ic; + can_f_submatch = TRUE; +*************** +*** 6976,6982 **** + + reg_match = submatch_match; + reg_mmatch = submatch_mmatch; +! reg_maxline = save_reg_maxline; + reg_win = save_reg_win; + ireg_ic = save_ireg_ic; + can_f_submatch = FALSE; +--- 6978,6985 ---- + + reg_match = submatch_match; + reg_mmatch = submatch_mmatch; +! reg_firstlnum = submatch_firstlnum; +! reg_maxline = submatch_maxline; + reg_win = save_reg_win; + ireg_ic = save_ireg_ic; + can_f_submatch = FALSE; +*************** +*** 7212,7217 **** +--- 7215,7243 ---- + + #ifdef FEAT_EVAL + /* ++ * Call reg_getline() with the line numbers from the submatch. If a ++ * substitute() was used the reg_maxline and other values have been ++ * overwritten. ++ */ ++ static char_u * ++ reg_getline_submatch(lnum) ++ linenr_T lnum; ++ { ++ char_u *s; ++ linenr_T save_first = reg_firstlnum; ++ linenr_T save_max = reg_maxline; ++ ++ reg_firstlnum = submatch_firstlnum; ++ reg_maxline = submatch_maxline; ++ ++ s = reg_getline(lnum); ++ ++ reg_firstlnum = save_first; ++ reg_maxline = save_max; ++ return s; ++ } ++ ++ /* + * Used for the submatch() function: get the string from the n'th submatch in + * allocated memory. + * Returns NULL when not in a ":s" command and for a non-existing submatch. +*************** +*** 7241,7247 **** + if (lnum < 0 || submatch_mmatch->endpos[no].lnum < 0) + return NULL; + +! s = reg_getline(lnum) + submatch_mmatch->startpos[no].col; + if (s == NULL) /* anti-crash check, cannot happen? */ + break; + if (submatch_mmatch->endpos[no].lnum == lnum) +--- 7267,7273 ---- + if (lnum < 0 || submatch_mmatch->endpos[no].lnum < 0) + return NULL; + +! s = reg_getline_submatch(lnum) + submatch_mmatch->startpos[no].col; + if (s == NULL) /* anti-crash check, cannot happen? */ + break; + if (submatch_mmatch->endpos[no].lnum == lnum) +*************** +*** 7267,7273 **** + ++lnum; + while (lnum < submatch_mmatch->endpos[no].lnum) + { +! s = reg_getline(lnum++); + if (round == 2) + STRCPY(retval + len, s); + len += (int)STRLEN(s); +--- 7293,7299 ---- + ++lnum; + while (lnum < submatch_mmatch->endpos[no].lnum) + { +! s = reg_getline_submatch(lnum++); + if (round == 2) + STRCPY(retval + len, s); + len += (int)STRLEN(s); +*************** +*** 7276,7282 **** + ++len; + } + if (round == 2) +! STRNCPY(retval + len, reg_getline(lnum), + submatch_mmatch->endpos[no].col); + len += submatch_mmatch->endpos[no].col; + if (round == 2) +--- 7302,7308 ---- + ++len; + } + if (round == 2) +! STRNCPY(retval + len, reg_getline_submatch(lnum), + submatch_mmatch->endpos[no].col); + len += submatch_mmatch->endpos[no].col; + if (round == 2) +*** ../vim-7.2.307/src/version.c 2009-11-25 18:21:48.000000000 +0100 +--- src/version.c 2009-11-25 19:50:16.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 308, + /**/ + +-- +Engineers are always delighted to share wisdom, even in areas in which they +have no experience whatsoever. Their logic provides them with inherent +insight into any field of expertise. This can be a problem when dealing with +the illogical people who believe that knowledge can only be derived through +experience. + (Scott Adams - The Dilbert principle) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.309 b/source/ap/vim/patches/7.2.309 new file mode 100644 index 000000000..a1713b755 --- /dev/null +++ b/source/ap/vim/patches/7.2.309 @@ -0,0 +1,48 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.309 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.309 (after 7.2.308) +Problem: Warning for missing function prototype. (Patrick Texier) +Solution: Add the prototype. +Files: src/regexp.c + + +*** ../vim-7.2.308/src/regexp.c 2009-11-25 19:51:56.000000000 +0100 +--- src/regexp.c 2009-11-26 20:39:18.000000000 +0100 +*************** +*** 7214,7219 **** +--- 7214,7221 ---- + } + + #ifdef FEAT_EVAL ++ static char_u *reg_getline_submatch __ARGS((linenr_T lnum)); ++ + /* + * Call reg_getline() with the line numbers from the submatch. If a + * substitute() was used the reg_maxline and other values have been +*** ../vim-7.2.308/src/version.c 2009-11-25 19:51:56.000000000 +0100 +--- src/version.c 2009-11-26 20:40:11.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 309, + /**/ + +-- +Female engineers become irresistible at the age of consent and remain that +way until about thirty minutes after their clinical death. Longer if it's a +warm day. + (Scott Adams - The Dilbert principle) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.310 b/source/ap/vim/patches/7.2.310 new file mode 100644 index 000000000..52734ddf4 --- /dev/null +++ b/source/ap/vim/patches/7.2.310 @@ -0,0 +1,63 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.310 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.310 +Problem: When a filetype plugin in ~/.vim/ftdetect uses ":setfiletype" and + the file starts with a "# comment" it gets "conf" filetype. +Solution: Check for "conf" filetype after using ftdetect plugins. +Files: runtime/filetype.vim + + +*** ../vim-7.2.309/runtime/filetype.vim 2008-08-06 18:56:36.000000000 +0200 +--- runtime/filetype.vim 2009-12-02 12:08:42.000000000 +0100 +*************** +*** 2400,2405 **** +--- 2435,2446 ---- + au BufNewFile,BufRead zsh*,zlog* call s:StarSetf('zsh') + + ++ ++ " Use the filetype detect plugins. They may overrule any of the previously ++ " detected filetypes. ++ runtime! ftdetect/*.vim ++ ++ + " Generic configuration file (check this last, it's just guessing!) + au BufNewFile,BufRead,StdinReadPost * + \ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat +*************** +*** 2408,2417 **** + \ setf conf | + \ endif + +- " Use the plugin-filetype checks last, they may overrule any of the previously +- " detected filetypes. +- runtime! ftdetect/*.vim +- + augroup END + + +--- 2449,2454 ---- +*** ../vim-7.2.309/src/version.c 2009-11-26 20:41:19.000000000 +0100 +--- src/version.c 2009-12-02 12:05:27.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 310, + /**/ + +-- +A)bort, R)etry, P)lease don't bother me again + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.311 b/source/ap/vim/patches/7.2.311 new file mode 100644 index 000000000..9e27a739d --- /dev/null +++ b/source/ap/vim/patches/7.2.311 @@ -0,0 +1,52 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.311 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.311 +Problem: Can't compile with FreeMiNT. +Solution: Change #ifdef for limits.h. (Alan Hourihane) +Files: src/fileio.c + + +*** ../vim-7.2.310/src/fileio.c 2009-11-18 20:12:15.000000000 +0100 +--- src/fileio.c 2009-12-02 13:30:07.000000000 +0100 +*************** +*** 21,27 **** + + #include "vim.h" + +! #ifdef __TANDEM + # include <limits.h> /* for SSIZE_MAX */ + #endif + +--- 21,27 ---- + + #include "vim.h" + +! #if defined(__TANDEM) || defined(__MINT__) + # include <limits.h> /* for SSIZE_MAX */ + #endif + +*** ../vim-7.2.310/src/version.c 2009-12-02 12:08:57.000000000 +0100 +--- src/version.c 2009-12-02 13:31:46.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 311, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +3. Your bookmark takes 15 minutes to scroll from top to bottom. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.312 b/source/ap/vim/patches/7.2.312 new file mode 100644 index 000000000..8b95868d4 --- /dev/null +++ b/source/ap/vim/patches/7.2.312 @@ -0,0 +1,312 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.312 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.312 +Problem: iconv() returns an invalid character sequence when conversion + fails. It should return an empty string. (Yongwei Wu) +Solution: Be more strict about invalid characters in the input. +Files: src/mbyte.c + + +*** ../vim-7.2.311/src/mbyte.c 2009-06-16 15:23:07.000000000 +0200 +--- src/mbyte.c 2009-11-25 16:10:44.000000000 +0100 +*************** +*** 133,154 **** + static int dbcs_ptr2cells_len __ARGS((char_u *p, int size)); + static int dbcs_ptr2char __ARGS((char_u *p)); + +! /* Lookup table to quickly get the length in bytes of a UTF-8 character from +! * the first byte of a UTF-8 string. Bytes which are illegal when used as the +! * first byte have a one, because these will be used separately. */ + static char utf8len_tab[256] = + { + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, +! 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, /*bogus*/ +! 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, /*bogus*/ + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,6,6,1,1, + }; + + /* + * XIM often causes trouble. Define XIM_DEBUG to get a log of XIM callbacks + * in the "xim.log" file. + */ +--- 133,172 ---- + static int dbcs_ptr2cells_len __ARGS((char_u *p, int size)); + static int dbcs_ptr2char __ARGS((char_u *p)); + +! /* +! * Lookup table to quickly get the length in bytes of a UTF-8 character from +! * the first byte of a UTF-8 string. +! * Bytes which are illegal when used as the first byte have a 1. +! * The NUL byte has length 1. +! */ + static char utf8len_tab[256] = + { + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, +! 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, +! 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,6,6,1,1, + }; + + /* ++ * Like utf8len_tab above, but using a zero for illegal lead bytes. ++ */ ++ static char utf8len_tab_zero[256] = ++ { ++ 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, ++ 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, ++ 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, ++ 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, ++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, ++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, ++ 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, ++ 3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,6,6,0,0, ++ }; ++ ++ /* + * XIM often causes trouble. Define XIM_DEBUG to get a log of XIM callbacks + * in the "xim.log" file. + */ +*************** +*** 1352,1358 **** + if (size > 0 && *p >= 0x80) + { + if (utf_ptr2len_len(p, size) < utf8len_tab[*p]) +! return 1; + c = utf_ptr2char(p); + /* An illegal byte is displayed as <xx>. */ + if (utf_ptr2len(p) == 1 || c == NUL) +--- 1370,1376 ---- + if (size > 0 && *p >= 0x80) + { + if (utf_ptr2len_len(p, size) < utf8len_tab[*p]) +! return 1; /* truncated */ + c = utf_ptr2char(p); + /* An illegal byte is displayed as <xx>. */ + if (utf_ptr2len(p) == 1 || c == NUL) +*************** +*** 1473,1479 **** + if (p[0] < 0x80) /* be quick for ASCII */ + return p[0]; + +! len = utf8len_tab[p[0]]; + if (len > 1 && (p[1] & 0xc0) == 0x80) + { + if (len == 2) +--- 1491,1497 ---- + if (p[0] < 0x80) /* be quick for ASCII */ + return p[0]; + +! len = utf8len_tab_zero[p[0]]; + if (len > 1 && (p[1] & 0xc0) == 0x80) + { + if (len == 2) +*************** +*** 1723,1728 **** +--- 1741,1747 ---- + /* + * Return length of UTF-8 character, obtained from the first byte. + * "b" must be between 0 and 255! ++ * Returns 1 for an invalid first byte value. + */ + int + utf_byte2len(b) +*************** +*** 1737,1742 **** +--- 1756,1762 ---- + * Returns 1 for "". + * Returns 1 for an illegal byte sequence (also in incomplete byte seq.). + * Returns number > "size" for an incomplete byte sequence. ++ * Never returns zero. + */ + int + utf_ptr2len_len(p, size) +*************** +*** 1747,1757 **** + int i; + int m; + +! if (*p == NUL) +! return 1; +! m = len = utf8len_tab[*p]; + if (len > size) + m = size; /* incomplete byte sequence. */ + for (i = 1; i < m; ++i) + if ((p[i] & 0xc0) != 0x80) + return 1; +--- 1767,1779 ---- + int i; + int m; + +! len = utf8len_tab[*p]; +! if (len == 1) +! return 1; /* NUL, ascii or illegal lead byte */ + if (len > size) + m = size; /* incomplete byte sequence. */ ++ else ++ m = len; + for (i = 1; i < m; ++i) + if ((p[i] & 0xc0) != 0x80) + return 1; +*************** +*** 2505,2510 **** +--- 2527,2533 ---- + /* + * mb_head_off() function pointer. + * Return offset from "p" to the first byte of the character it points into. ++ * If "p" points to the NUL at the end of the string return 0. + * Returns 0 when already at the first byte of a character. + */ + int +*************** +*** 2524,2530 **** + + /* It can't be a trailing byte when not using DBCS, at the start of the + * string or the previous byte can't start a double-byte. */ +! if (p <= base || MB_BYTE2LEN(p[-1]) == 1) + return 0; + + /* This is slow: need to start at the base and go forward until the +--- 2547,2553 ---- + + /* It can't be a trailing byte when not using DBCS, at the start of the + * string or the previous byte can't start a double-byte. */ +! if (p <= base || MB_BYTE2LEN(p[-1]) == 1 || *p == NUL) + return 0; + + /* This is slow: need to start at the base and go forward until the +*************** +*** 2552,2558 **** + * lead byte in the current cell. */ + if (p <= base + || (enc_dbcs == DBCS_JPNU && p[-1] == 0x8e) +! || MB_BYTE2LEN(p[-1]) == 1) + return 0; + + /* This is slow: need to start at the base and go forward until the +--- 2575,2582 ---- + * lead byte in the current cell. */ + if (p <= base + || (enc_dbcs == DBCS_JPNU && p[-1] == 0x8e) +! || MB_BYTE2LEN(p[-1]) == 1 +! || *p == NUL) + return 0; + + /* This is slow: need to start at the base and go forward until the +*************** +*** 2578,2583 **** +--- 2602,2608 ---- + char_u *q; + char_u *s; + int c; ++ int len; + #ifdef FEAT_ARABIC + char_u *j; + #endif +*************** +*** 2597,2604 **** + --q; + /* Check for illegal sequence. Do allow an illegal byte after where we + * started. */ +! if (utf8len_tab[*q] != (int)(s - q + 1) +! && utf8len_tab[*q] != (int)(p - q + 1)) + return 0; + + if (q <= base) +--- 2622,2629 ---- + --q; + /* Check for illegal sequence. Do allow an illegal byte after where we + * started. */ +! len = utf8len_tab[*q]; +! if (len != (int)(s - q + 1) && len != (int)(p - q + 1)) + return 0; + + if (q <= base) +*************** +*** 2810,2818 **** + + while (end == NULL ? *p != NUL : p < end) + { +! if ((*p & 0xc0) == 0x80) + return FALSE; /* invalid lead byte */ +- l = utf8len_tab[*p]; + if (end != NULL && p + l > end) + return FALSE; /* incomplete byte sequence */ + ++p; +--- 2835,2843 ---- + + while (end == NULL ? *p != NUL : p < end) + { +! l = utf8len_tab_zero[*p]; +! if (l == 0) + return FALSE; /* invalid lead byte */ + if (end != NULL && p + l > end) + return FALSE; /* incomplete byte sequence */ + ++p; +*************** +*** 6117,6128 **** + d = retval; + for (i = 0; i < len; ++i) + { +! l = utf_ptr2len(ptr + i); + if (l == 0) + *d++ = NUL; + else if (l == 1) + { +! if (unconvlenp != NULL && utf8len_tab[ptr[i]] > len - i) + { + /* Incomplete sequence at the end. */ + *unconvlenp = len - i; +--- 6142,6161 ---- + d = retval; + for (i = 0; i < len; ++i) + { +! l = utf_ptr2len_len(ptr + i, len - i); + if (l == 0) + *d++ = NUL; + else if (l == 1) + { +! int l_w = utf8len_tab_zero[ptr[i]]; +! +! if (l_w == 0) +! { +! /* Illegal utf-8 byte cannot be converted */ +! vim_free(retval); +! return NULL; +! } +! if (unconvlenp != NULL && l_w > len - i) + { + /* Incomplete sequence at the end. */ + *unconvlenp = len - i; +*** ../vim-7.2.311/src/version.c 2009-12-02 13:32:10.000000000 +0100 +--- src/version.c 2009-12-02 15:00:23.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 312, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +6. You refuse to go to a vacation spot with no electricity and no phone lines. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.313 b/source/ap/vim/patches/7.2.313 new file mode 100644 index 000000000..77b9103a4 --- /dev/null +++ b/source/ap/vim/patches/7.2.313 @@ -0,0 +1,117 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.313 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.313 +Problem: Command line completion doesn't work after "%:h" and similar. +Solution: Expand these items before doing the completion. +Files: src/ex_getln.c, src/misc1.c, src/proto/misc1.pro + + +*** ../vim-7.2.312/src/ex_getln.c 2009-09-18 17:24:54.000000000 +0200 +--- src/ex_getln.c 2009-12-02 16:40:06.000000000 +0100 +*************** +*** 4422,4428 **** + flags |= EW_FILE; + else + flags = (flags | EW_DIR) & ~EW_FILE; +! ret = expand_wildcards(1, &pat, num_file, file, flags); + if (free_pat) + vim_free(pat); + return ret; +--- 4422,4429 ---- + flags |= EW_FILE; + else + flags = (flags | EW_DIR) & ~EW_FILE; +! /* Expand wildcards, supporting %:h and the like. */ +! ret = expand_wildcards_eval(&pat, num_file, file, flags); + if (free_pat) + vim_free(pat); + return ret; +*** ../vim-7.2.312/src/misc1.c 2009-11-17 16:08:12.000000000 +0100 +--- src/misc1.c 2009-12-02 17:06:49.000000000 +0100 +*************** +*** 8447,8452 **** +--- 8447,8492 ---- + } + + /* ++ * Invoke expand_wildcards() for one pattern. ++ * Expand items like "%:h" before the expansion. ++ * Returns OK or FAIL. ++ */ ++ int ++ expand_wildcards_eval(pat, num_file, file, flags) ++ char_u **pat; /* pointer to input pattern */ ++ int *num_file; /* resulting number of files */ ++ char_u ***file; /* array of resulting files */ ++ int flags; /* EW_DIR, etc. */ ++ { ++ int ret = FAIL; ++ char_u *eval_pat = NULL; ++ char_u *exp_pat = *pat; ++ char_u *ignored_msg; ++ int usedlen; ++ ++ if (*exp_pat == '%' || *exp_pat == '#' || *exp_pat == '<') ++ { ++ ++emsg_off; ++ eval_pat = eval_vars(exp_pat, exp_pat, &usedlen, ++ NULL, &ignored_msg, NULL); ++ --emsg_off; ++ if (eval_pat != NULL) ++ exp_pat = concat_str(eval_pat, exp_pat + usedlen); ++ } ++ ++ if (exp_pat != NULL) ++ ret = expand_wildcards(1, &exp_pat, num_file, file, flags); ++ ++ if (eval_pat != NULL) ++ { ++ vim_free(exp_pat); ++ vim_free(eval_pat); ++ } ++ ++ return ret; ++ } ++ ++ /* + * Expand wildcards. Calls gen_expand_wildcards() and removes files matching + * 'wildignore'. + * Returns OK or FAIL. +*** ../vim-7.2.312/src/proto/misc1.pro 2007-09-26 22:36:32.000000000 +0200 +--- src/proto/misc1.pro 2009-12-02 16:41:52.000000000 +0100 +*************** +*** 85,90 **** +--- 85,91 ---- + int vim_fexists __ARGS((char_u *fname)); + void line_breakcheck __ARGS((void)); + void fast_breakcheck __ARGS((void)); ++ int expand_wildcards_eval __ARGS((char_u **pat, int *num_file, char_u ***file, int flags)); + int expand_wildcards __ARGS((int num_pat, char_u **pat, int *num_file, char_u ***file, int flags)); + int match_suffix __ARGS((char_u *fname)); + int unix_expandpath __ARGS((garray_T *gap, char_u *path, int wildoff, int flags, int didstar)); +*** ../vim-7.2.312/src/version.c 2009-12-02 15:03:24.000000000 +0100 +--- src/version.c 2009-12-02 17:14:02.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 313, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +8. You spend half of the plane trip with your laptop on your lap...and your + child in the overhead compartment. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.314 b/source/ap/vim/patches/7.2.314 new file mode 100644 index 000000000..490605d00 --- /dev/null +++ b/source/ap/vim/patches/7.2.314 @@ -0,0 +1,56 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.314 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.314 +Problem: Missing function in small build. +Solution: Always include concat_str. +Files: src/misc1.c + + +*** ../vim-7.2.313/src/misc1.c 2009-12-02 17:15:04.000000000 +0100 +--- src/misc1.c 2009-12-02 17:44:55.000000000 +0100 +*************** +*** 4666,4672 **** + return dest; + } + +- #if defined(FEAT_EVAL) || defined(FEAT_GETTEXT) || defined(PROTO) + /* + * Concatenate two strings and return the result in allocated memory. + * Returns NULL when out of memory. +--- 4666,4671 ---- +*************** +*** 4687,4693 **** + } + return dest; + } +- #endif + + /* + * Add a path separator to a file name, unless it already ends in a path +--- 4686,4691 ---- +*** ../vim-7.2.313/src/version.c 2009-12-02 17:15:04.000000000 +0100 +--- src/version.c 2009-12-02 17:47:18.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 314, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +9. All your daydreaming is preoccupied with getting a faster connection to the + net: 28.8...ISDN...cable modem...T1...T3. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.315 b/source/ap/vim/patches/7.2.315 new file mode 100644 index 000000000..6a5e7c7b1 --- /dev/null +++ b/source/ap/vim/patches/7.2.315 @@ -0,0 +1,134 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.315 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.315 +Problem: Python libs can't be found on 64 bit system. +Solution: Add lib64 to the list of directories. (Michael Henry) +Files: src/auto/configure, src/configure.in + + +*** ../vim-7.2.314/src/auto/configure 2009-11-17 17:13:03.000000000 +0100 +--- src/auto/configure 2009-12-02 17:21:20.000000000 +0100 +*************** +*** 5126,5132 **** + + vi_cv_path_python_conf= + for path in "${vi_cv_path_python_pfx}" "${vi_cv_path_python_epfx}"; do +! for subdir in lib share; do + d="${path}/${subdir}/python${vi_cv_var_python_version}/config" + if test -d "$d" && test -f "$d/config.c"; then + vi_cv_path_python_conf="$d" +--- 5126,5132 ---- + + vi_cv_path_python_conf= + for path in "${vi_cv_path_python_pfx}" "${vi_cv_path_python_epfx}"; do +! for subdir in lib64 lib share; do + d="${path}/${subdir}/python${vi_cv_var_python_version}/config" + if test -d "$d" && test -f "$d/config.c"; then + vi_cv_path_python_conf="$d" +*************** +*** 13718,13725 **** + $as_echo "pty mode: $vim_cv_tty_mode, group: $vim_cv_tty_group" >&6; } + else + vim_cv_tty_group=world +! { $as_echo "$as_me:$LINENO: result: ptys are world accessable" >&5 +! $as_echo "ptys are world accessable" >&6; } + fi + + else +--- 13718,13725 ---- + $as_echo "pty mode: $vim_cv_tty_mode, group: $vim_cv_tty_group" >&6; } + else + vim_cv_tty_group=world +! { $as_echo "$as_me:$LINENO: result: ptys are world accessible" >&5 +! $as_echo "ptys are world accessible" >&6; } + fi + + else +*************** +*** 13730,13737 **** + ( exit $ac_status ) + + vim_cv_tty_group=world +! { $as_echo "$as_me:$LINENO: result: can't determine - assume ptys are world accessable" >&5 +! $as_echo "can't determine - assume ptys are world accessable" >&6; } + + fi + rm -rf conftest.dSYM +--- 13730,13737 ---- + ( exit $ac_status ) + + vim_cv_tty_group=world +! { $as_echo "$as_me:$LINENO: result: can't determine - assume ptys are world accessible" >&5 +! $as_echo "can't determine - assume ptys are world accessible" >&6; } + + fi + rm -rf conftest.dSYM +*** ../vim-7.2.314/src/configure.in 2009-11-17 17:13:03.000000000 +0100 +--- src/configure.in 2009-12-02 17:21:10.000000000 +0100 +*************** +*** 686,692 **** + [ + vi_cv_path_python_conf= + for path in "${vi_cv_path_python_pfx}" "${vi_cv_path_python_epfx}"; do +! for subdir in lib share; do + d="${path}/${subdir}/python${vi_cv_var_python_version}/config" + if test -d "$d" && test -f "$d/config.c"; then + vi_cv_path_python_conf="$d" +--- 686,692 ---- + [ + vi_cv_path_python_conf= + for path in "${vi_cv_path_python_pfx}" "${vi_cv_path_python_epfx}"; do +! for subdir in lib64 lib share; do + d="${path}/${subdir}/python${vi_cv_var_python_version}/config" + if test -d "$d" && test -f "$d/config.c"; then + vi_cv_path_python_conf="$d" +*************** +*** 2557,2567 **** + AC_MSG_RESULT([pty mode: $vim_cv_tty_mode, group: $vim_cv_tty_group]) + else + vim_cv_tty_group=world +! AC_MSG_RESULT([ptys are world accessable]) + fi + ],[ + vim_cv_tty_group=world +! AC_MSG_RESULT([can't determine - assume ptys are world accessable]) + ],[ + AC_MSG_ERROR(cross-compiling: please set 'vim_cv_tty_group' and 'vim_cv_tty_mode') + ]) +--- 2557,2567 ---- + AC_MSG_RESULT([pty mode: $vim_cv_tty_mode, group: $vim_cv_tty_group]) + else + vim_cv_tty_group=world +! AC_MSG_RESULT([ptys are world accessible]) + fi + ],[ + vim_cv_tty_group=world +! AC_MSG_RESULT([can't determine - assume ptys are world accessible]) + ],[ + AC_MSG_ERROR(cross-compiling: please set 'vim_cv_tty_group' and 'vim_cv_tty_mode') + ]) +*** ../vim-7.2.314/src/version.c 2009-12-02 17:47:46.000000000 +0100 +--- src/version.c 2009-12-02 17:57:39.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 315, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +10. And even your night dreams are in HTML. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.316 b/source/ap/vim/patches/7.2.316 new file mode 100644 index 000000000..34e629fe1 --- /dev/null +++ b/source/ap/vim/patches/7.2.316 @@ -0,0 +1,83 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.316 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.316 +Problem: May get multiple _FORTIFY_SOURCE arguments. (Tony Mechelynck) +Solution: First remove all these arguments and then add the one we want. + (Dominique Pelle) +Files: src/auto/configure, src/configure.in + + +*** ../vim-7.2.315/src/auto/configure 2009-12-02 17:59:08.000000000 +0100 +--- src/auto/configure 2009-12-16 17:05:59.000000000 +0100 +*************** +*** 17185,17194 **** + { $as_echo "$as_me:$LINENO: result: no" >&5 + $as_echo "no" >&6; } + fi +! { $as_echo "$as_me:$LINENO: checking whether we need -D_FORTIFY_SOURCE=1" >&5 + $as_echo_n "checking whether we need -D_FORTIFY_SOURCE=1... " >&6; } + if test "$gccmajor" -gt "3"; then +! CFLAGS=`echo "$CFLAGS -D_FORTIFY_SOURCE=1" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=2//g' -e 's/-D_FORTIFY_SOURCE=2//g'` + { $as_echo "$as_me:$LINENO: result: yes" >&5 + $as_echo "yes" >&6; } + else +--- 17185,17194 ---- + { $as_echo "$as_me:$LINENO: result: no" >&5 + $as_echo "no" >&6; } + fi +! { $as_echo "$as_me:$LINENO: checking whether we need -D_FORTIFY_SOURCE=1" >&5 + $as_echo_n "checking whether we need -D_FORTIFY_SOURCE=1... " >&6; } + if test "$gccmajor" -gt "3"; then +! CFLAGS=`echo "$CFLAGS" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=.//g' -e 's/-D_FORTIFY_SOURCE=.//g' -e 's/$/ -D_FORTIFY_SOURCE=1/'` + { $as_echo "$as_me:$LINENO: result: yes" >&5 + $as_echo "yes" >&6; } + else +*** ../vim-7.2.315/src/configure.in 2009-12-02 17:59:08.000000000 +0100 +--- src/configure.in 2009-12-16 17:05:55.000000000 +0100 +*************** +*** 3241,3249 **** + fi + dnl -D_FORTIFY_SOURCE=2 crashes Vim on strcpy(buf, "000") when buf is + dnl declared as char x[1] but actually longer. Introduced in gcc 4.0. + AC_MSG_CHECKING(whether we need -D_FORTIFY_SOURCE=1) + if test "$gccmajor" -gt "3"; then +! CFLAGS=`echo "$CFLAGS -D_FORTIFY_SOURCE=1" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=2//g' -e 's/-D_FORTIFY_SOURCE=2//g'` + AC_MSG_RESULT(yes) + else + AC_MSG_RESULT(no) +--- 3241,3250 ---- + fi + dnl -D_FORTIFY_SOURCE=2 crashes Vim on strcpy(buf, "000") when buf is + dnl declared as char x[1] but actually longer. Introduced in gcc 4.0. ++ dnl Also remove duplicate _FORTIFY_SOURCE arguments. + AC_MSG_CHECKING(whether we need -D_FORTIFY_SOURCE=1) + if test "$gccmajor" -gt "3"; then +! CFLAGS=`echo "$CFLAGS" | sed -e 's/-Wp,-D_FORTIFY_SOURCE=.//g' -e 's/-D_FORTIFY_SOURCE=.//g' -e 's/$/ -D_FORTIFY_SOURCE=1/'` + AC_MSG_RESULT(yes) + else + AC_MSG_RESULT(no) +*** ../vim-7.2.315/src/version.c 2009-12-02 17:59:08.000000000 +0100 +--- src/version.c 2009-12-16 17:12:25.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 316, + /**/ + +-- +Have you heard about the new Beowulf cluster? It's so fast, it executes +an infinite loop in 6 seconds. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.317 b/source/ap/vim/patches/7.2.317 new file mode 100644 index 000000000..bc0ceeea4 --- /dev/null +++ b/source/ap/vim/patches/7.2.317 @@ -0,0 +1,148 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.317 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.317 +Problem: Memory leak when adding a highlight group with unprintable + characters, resulting in E669. +Solution: Free the memory. And fix a few typos. (Dominique Pelle) +Files: src/syntax.c + + +*** ../vim-7.2.316/src/syntax.c 2009-05-17 13:30:58.000000000 +0200 +--- src/syntax.c 2009-12-16 18:09:05.000000000 +0100 +*************** +*** 206,212 **** + static int current_attr = 0; /* attr of current syntax word */ + #ifdef FEAT_EVAL + static int current_id = 0; /* ID of current char for syn_get_id() */ +! static int current_trans_id = 0; /* idem, transparancy removed */ + #endif + + typedef struct syn_cluster_S +--- 206,212 ---- + static int current_attr = 0; /* attr of current syntax word */ + #ifdef FEAT_EVAL + static int current_id = 0; /* ID of current char for syn_get_id() */ +! static int current_trans_id = 0; /* idem, transparency removed */ + #endif + + typedef struct syn_cluster_S +*************** +*** 282,288 **** + int si_idx; /* index of syntax pattern or + KEYWORD_IDX */ + int si_id; /* highlight group ID for keywords */ +! int si_trans_id; /* idem, transparancy removed */ + int si_m_lnum; /* lnum of the match */ + int si_m_startcol; /* starting column of the match */ + lpos_T si_m_endpos; /* just after end posn of the match */ +--- 282,288 ---- + int si_idx; /* index of syntax pattern or + KEYWORD_IDX */ + int si_id; /* highlight group ID for keywords */ +! int si_trans_id; /* idem, transparency removed */ + int si_m_lnum; /* lnum of the match */ + int si_m_startcol; /* starting column of the match */ + lpos_T si_m_endpos; /* just after end posn of the match */ +*************** +*** 1274,1280 **** + dist = syn_buf->b_ml.ml_line_count / (syn_buf->b_sst_len - Rows) + 1; + + /* +! * Go throught the list to find the "tick" for the oldest entry that can + * be removed. Set "above" when the "tick" for the oldest entry is above + * "b_sst_lasttick" (the display tick wraps around). + */ +--- 1274,1280 ---- + dist = syn_buf->b_ml.ml_line_count / (syn_buf->b_sst_len - Rows) + 1; + + /* +! * Go through the list to find the "tick" for the oldest entry that can + * be removed. Set "above" when the "tick" for the oldest entry is above + * "b_sst_lasttick" (the display tick wraps around). + */ +*************** +*** 2319,2325 **** + ? (syn_buf->b_spell_cluster_id == 0) + : (syn_buf->b_syn_spell == SYNSPL_TOP); + +! /* nextgroup ends at end of line, unless "skipnl" or "skipemtpy" present */ + if (current_next_list != NULL + && syn_getcurline()[current_col + 1] == NUL + && !(current_next_flags & (HL_SKIPNL | HL_SKIPEMPTY))) +--- 2319,2325 ---- + ? (syn_buf->b_spell_cluster_id == 0) + : (syn_buf->b_syn_spell == SYNSPL_TOP); + +! /* nextgroup ends at end of line, unless "skipnl" or "skipempty" present */ + if (current_next_list != NULL + && syn_getcurline()[current_col + 1] == NUL + && !(current_next_flags & (HL_SKIPNL | HL_SKIPEMPTY))) +*************** +*** 6108,6114 **** + win_T *wp; + long lnum; + colnr_T col; +! int trans; /* remove transparancy */ + int *spellp; /* return: can do spell checking */ + int keep_state; /* keep state of char at "col" */ + { +--- 6108,6114 ---- + win_T *wp; + long lnum; + colnr_T col; +! int trans; /* remove transparency */ + int *spellp; /* return: can do spell checking */ + int keep_state; /* keep state of char at "col" */ + { +*************** +*** 7523,7529 **** + #if defined(FEAT_GUI) || defined(PROTO) + /* + * Set the normal foreground and background colors according to the "Normal" +! * highlighighting group. For X11 also set "Menu", "Scrollbar", and + * "Tooltip" colors. + */ + void +--- 7523,7529 ---- + #if defined(FEAT_GUI) || defined(PROTO) + /* + * Set the normal foreground and background colors according to the "Normal" +! * highlighting group. For X11 also set "Menu", "Scrollbar", and + * "Tooltip" colors. + */ + void +*************** +*** 8647,8652 **** +--- 8647,8653 ---- + if (!vim_isprintc(*p)) + { + EMSG(_("E669: Unprintable character in group name")); ++ vim_free(name); + return 0; + } + else if (!ASCII_ISALNUM(*p) && *p != '_') +*** ../vim-7.2.316/src/version.c 2009-12-16 17:14:08.000000000 +0100 +--- src/version.c 2009-12-16 18:09:14.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 317, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +35. Your husband tells you he's had the beard for 2 months. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.318 b/source/ap/vim/patches/7.2.318 new file mode 100644 index 000000000..430183606 --- /dev/null +++ b/source/ap/vim/patches/7.2.318 @@ -0,0 +1,91 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.318 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.318 +Problem: Wrong locale value breaks floating point numbers for gvim. +Solution: Set the locale again after doing GUI inits. (Dominique Pelle) +Files: src/main.c + + +*** ../vim-7.2.317/src/main.c 2009-11-17 12:31:30.000000000 +0100 +--- src/main.c 2009-12-16 18:23:46.000000000 +0100 +*************** +*** 366,379 **** + * Check if the GUI can be started. Reset gui.starting if not. + * Don't know about other systems, stay on the safe side and don't check. + */ +! if (gui.starting && gui_init_check() == FAIL) + { +! gui.starting = FALSE; + +! /* When running "evim" or "gvim -y" we need the menus, exit if we +! * don't have them. */ +! if (params.evim_mode) +! mch_exit(1); + } + # endif + #endif +--- 366,386 ---- + * Check if the GUI can be started. Reset gui.starting if not. + * Don't know about other systems, stay on the safe side and don't check. + */ +! if (gui.starting) + { +! if (gui_init_check() == FAIL) +! { +! gui.starting = FALSE; + +! /* When running "evim" or "gvim -y" we need the menus, exit if we +! * don't have them. */ +! if (params.evim_mode) +! mch_exit(1); +! } +! # if defined(HAVE_LOCALE_H) || defined(X_LOCALE) +! /* Re-initialize locale, it may have been altered by gui_init_check() */ +! init_locale(); +! # endif + } + # endif + #endif +*************** +*** 3685,3691 **** + } + else if (STRICMP(argv[i], "--servername") == 0) + { +! /* Alredy processed. Take it out of the command line */ + i++; + continue; + } +--- 3692,3698 ---- + } + else if (STRICMP(argv[i], "--servername") == 0) + { +! /* Already processed. Take it out of the command line */ + i++; + continue; + } +*** ../vim-7.2.317/src/version.c 2009-12-16 18:13:04.000000000 +0100 +--- src/version.c 2009-12-16 18:26:24.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 318, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +36. You miss more than five meals a week downloading the latest games from + Apogee. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.319 b/source/ap/vim/patches/7.2.319 new file mode 100644 index 000000000..3cbfd42ef --- /dev/null +++ b/source/ap/vim/patches/7.2.319 @@ -0,0 +1,63 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.319 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.319 +Problem: Motif: accessing freed memory when cancelling font dialog. +Solution: Destroy the widget only after accessing it. (Dominique Pelle) +Files: src/gui_xmdlg.c + + +*** ../vim-7.2.318/src/gui_xmdlg.c 2009-11-03 12:53:44.000000000 +0100 +--- src/gui_xmdlg.c 2009-12-16 18:39:21.000000000 +0100 +*************** +*** 1274,1286 **** + XtAppProcessEvent(XtWidgetToApplicationContext(data->dialog), + (XtInputMask)XtIMAll); + +- XtDestroyWidget(data->dialog); +- + if (data->old) + { + XFreeFont(XtDisplay(data->dialog), data->old); + XmFontListFree(data->old_list); + } + + gui_motif_synch_fonts(); + +--- 1274,1285 ---- + XtAppProcessEvent(XtWidgetToApplicationContext(data->dialog), + (XtInputMask)XtIMAll); + + if (data->old) + { + XFreeFont(XtDisplay(data->dialog), data->old); + XmFontListFree(data->old_list); + } ++ XtDestroyWidget(data->dialog); + + gui_motif_synch_fonts(); + +*** ../vim-7.2.318/src/version.c 2009-12-16 18:27:29.000000000 +0100 +--- src/version.c 2009-12-16 18:40:06.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 319, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +37. You start looking for hot HTML addresses in public restrooms. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.320 b/source/ap/vim/patches/7.2.320 new file mode 100644 index 000000000..73f62247e --- /dev/null +++ b/source/ap/vim/patches/7.2.320 @@ -0,0 +1,199 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.320 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.320 +Problem: Unused function in Mzscheme interface. +Solution: Remove the function and what depends on it. (Dominique Pelle) +Files: src/if_mzsch.c, src/proto/if_mzsch.pro + + +*** ../vim-7.2.319/src/if_mzsch.c 2009-09-11 12:20:47.000000000 +0200 +--- src/if_mzsch.c 2009-12-16 19:01:04.000000000 +0100 +*************** +*** 70,83 **** + Scheme_Object *port; + } Port_Info; + +- /* info for do_apply */ +- typedef struct +- { +- Scheme_Object *proc; +- int argc; +- Scheme_Object **argv; +- } Apply_Info; +- + /* + *======================================================================== + * Vim-Control Commands +--- 70,75 ---- +*************** +*** 160,166 **** + static Scheme_Object *extract_exn_message(Scheme_Object *v); + static Scheme_Object *do_eval(void *, int noargc, Scheme_Object **noargv); + static Scheme_Object *do_load(void *, int noargc, Scheme_Object **noargv); +- static Scheme_Object *do_apply(void *, int noargc, Scheme_Object **noargv); + static void register_vim_exn(void); + static vim_mz_buffer *get_buffer_arg(const char *fname, int argnum, + int argc, Scheme_Object **argv); +--- 152,157 ---- +*************** +*** 1056,1062 **** + MZ_GC_REG(); + config = scheme_config; + MZ_GC_CHECK(); +! /* recreate ports each call effectivelly clearing these ones */ + curout = scheme_make_string_output_port(); + MZ_GC_CHECK(); + curerr = scheme_make_string_output_port(); +--- 1047,1053 ---- + MZ_GC_REG(); + config = scheme_config; + MZ_GC_CHECK(); +! /* recreate ports each call effectively clearing these ones */ + curout = scheme_make_string_output_port(); + MZ_GC_CHECK(); + curerr = scheme_make_string_output_port(); +*************** +*** 1196,1231 **** + } + } + +- /* +- * apply MzScheme procedure with arguments, +- * handling errors +- */ +- Scheme_Object * +- mzvim_apply(Scheme_Object *proc, int argc, Scheme_Object **argv) +- { +- if (mzscheme_init()) +- return FAIL; +- else +- { +- Apply_Info data = {NULL, 0, NULL}; +- Scheme_Object *ret = NULL; +- +- MZ_GC_DECL_REG(5); +- MZ_GC_VAR_IN_REG(0, ret); +- MZ_GC_VAR_IN_REG(1, data.proc); +- MZ_GC_ARRAY_VAR_IN_REG(2, data.argv, argc); +- MZ_GC_REG(); +- +- data.proc = proc; +- data.argc = argc; +- data.argv = argv; +- +- eval_with_exn_handling(&data, do_apply, &ret); +- MZ_GC_UNREG(); +- return ret; +- } +- } +- + static Scheme_Object * + do_load(void *data, int noargc, Scheme_Object **noargv) + { +--- 1187,1192 ---- +*************** +*** 1257,1263 **** + MZ_GC_CHECK(); + } + +! /* errors will be caught in do_mzscheme_comamnd and ex_mzfile */ + scheme_close_input_port(pinfo->port); + MZ_GC_CHECK(); + pinfo->port = NULL; +--- 1218,1224 ---- + MZ_GC_CHECK(); + } + +! /* errors will be caught in do_mzscheme_command and ex_mzfile */ + scheme_close_input_port(pinfo->port); + MZ_GC_CHECK(); + pinfo->port = NULL; +*************** +*** 1348,1360 **** + return scheme_eval_string_all((char *)s, environment, TRUE); + } + +- static Scheme_Object * +- do_apply(void *a, int noargc, Scheme_Object **noargv) +- { +- Apply_Info *info = (Apply_Info *)a; +- return scheme_apply(info->proc, info->argc, info->argv); +- } +- + /* + *======================================================================== + * 3. MzScheme I/O Handlers +--- 1309,1314 ---- +*************** +*** 2128,2134 **** + static Scheme_Object * + set_buffer_line(void *data, int argc, Scheme_Object **argv) + { +! /* First of all, we check the the of the supplied MzScheme object. + * There are three cases: + * 1. #f - this is a deletion. + * 2. A string - this is a replacement. +--- 2082,2088 ---- + static Scheme_Object * + set_buffer_line(void *data, int argc, Scheme_Object **argv) + { +! /* First of all, we check the value of the supplied MzScheme object. + * There are three cases: + * 1. #f - this is a deletion. + * 2. A string - this is a replacement. +*************** +*** 2428,2434 **** + /* + * (insert-buff-line-list {linenr} {string/string-list} [buffer]) + * +! * Insert a number of lines into the specified buffer after the specifed line. + * The line number is in Vim format (1-based). The lines to be inserted are + * given as an MzScheme list of string objects or as a single string. The lines + * to be added are checked for validity and correct format. Errors are +--- 2382,2388 ---- + /* + * (insert-buff-line-list {linenr} {string/string-list} [buffer]) + * +! * Insert a number of lines into the specified buffer after the specified line. + * The line number is in Vim format (1-based). The lines to be inserted are + * given as an MzScheme list of string objects or as a single string. The lines + * to be added are checked for validity and correct format. Errors are +*** ../vim-7.2.319/src/proto/if_mzsch.pro 2009-05-26 22:58:43.000000000 +0200 +--- src/proto/if_mzsch.pro 2009-12-16 19:01:01.000000000 +0100 +*************** +*** 13,20 **** + void mzvim_check_threads __ARGS((void)); + void mzvim_reset_timer __ARGS((void)); + void *mzvim_eval_string __ARGS((char_u *str)); +- struct Scheme_Object *mzvim_apply __ARGS((struct Scheme_Object *, int argc, +- struct Scheme_Object **)); + int mzthreads_allowed __ARGS((void)); + void mzscheme_main __ARGS((void)); + /* vim: set ft=c : */ +--- 13,18 ---- +*** ../vim-7.2.319/src/version.c 2009-12-16 18:49:09.000000000 +0100 +--- src/version.c 2009-12-16 18:53:48.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 320, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +38. You wake up at 3 a.m. to go to the bathroom and stop and check your e-mail + on the way back to bed. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.321 b/source/ap/vim/patches/7.2.321 new file mode 100644 index 000000000..69c08f489 --- /dev/null +++ b/source/ap/vim/patches/7.2.321 @@ -0,0 +1,59 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.321 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.321 +Problem: histadd() and searching with "*" fails to add entry to history + when it is empty. +Solution: Initialize the history. (Lech Lorens) +Files: src/eval.c, src/normal.c + + +*** ../vim-7.2.320/src/eval.c 2009-11-17 12:20:30.000000000 +0100 +--- src/eval.c 2009-12-24 14:37:50.000000000 +0100 +*************** +*** 12014,12019 **** +--- 12014,12020 ---- + str = get_tv_string_buf(&argvars[1], buf); + if (*str != NUL) + { ++ init_history(); + add_to_history(histype, str, FALSE, NUL); + rettv->vval.v_number = TRUE; + return; +*** ../vim-7.2.320/src/normal.c 2009-05-17 13:30:58.000000000 +0200 +--- src/normal.c 2009-12-24 14:38:28.000000000 +0100 +*************** +*** 5602,5607 **** +--- 5602,5608 ---- + STRCAT(buf, "\\>"); + #ifdef FEAT_CMDHIST + /* put pattern in search history */ ++ init_history(); + add_to_history(HIST_SEARCH, buf, TRUE, NUL); + #endif + normal_search(cap, cmdchar == '*' ? '/' : '?', buf, 0); +*** ../vim-7.2.320/src/version.c 2009-12-16 19:02:05.000000000 +0100 +--- src/version.c 2009-12-24 14:39:46.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 321, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +43. You tell the kids they can't use the computer because "Daddy's got work to + do" and you don't even have a job. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.322 b/source/ap/vim/patches/7.2.322 new file mode 100644 index 000000000..57f27fcd8 --- /dev/null +++ b/source/ap/vim/patches/7.2.322 @@ -0,0 +1,49 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.322 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.322 +Problem: Wrong indenting in virtual replace mode with CTRL-Y below a short + line. +Solution: Check for character to be NUL. (suggested by Lech Lorens) +Files: src/edit.c + + +*** ../vim-7.2.321/src/edit.c 2009-11-17 17:40:34.000000000 +0100 +--- src/edit.c 2009-12-24 15:18:23.000000000 +0100 +*************** +*** 7397,7402 **** +--- 7397,7406 ---- + int icase; + int i; + ++ if (keytyped == NUL) ++ /* Can happen with CTRL-Y and CTRL-E on a short line. */ ++ return FALSE; ++ + #ifdef FEAT_EVAL + if (*curbuf->b_p_inde != NUL) + look = curbuf->b_p_indk; /* 'indentexpr' set: use 'indentkeys' */ +*** ../vim-7.2.321/src/version.c 2009-12-24 15:00:31.000000000 +0100 +--- src/version.c 2009-12-24 15:44:46.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 322, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +45. You buy a Captain Kirk chair with a built-in keyboard and mouse. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.323 b/source/ap/vim/patches/7.2.323 new file mode 100644 index 000000000..fc4324615 --- /dev/null +++ b/source/ap/vim/patches/7.2.323 @@ -0,0 +1,95 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.323 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.323 (extra) +Problem: Balloon evaluation crashes on Win64. +Solution: Change pointer types. (Sergey Khorev) +Files: src/gui_w32.c + + +*** ../vim-7.2.322/src/gui_w32.c 2009-01-28 21:22:20.000000000 +0100 +--- src/gui_w32.c 2009-12-24 16:06:41.000000000 +0100 +*************** +*** 212,223 **** + DWORD dwPlatformID; + } DLLVERSIONINFO; + + typedef struct tagTOOLINFOA_NEW + { + UINT cbSize; + UINT uFlags; + HWND hwnd; +! UINT uId; + RECT rect; + HINSTANCE hinst; + LPSTR lpszText; +--- 212,225 ---- + DWORD dwPlatformID; + } DLLVERSIONINFO; + ++ #include <poppack.h> ++ + typedef struct tagTOOLINFOA_NEW + { + UINT cbSize; + UINT uFlags; + HWND hwnd; +! UINT_PTR uId; + RECT rect; + HINSTANCE hinst; + LPSTR lpszText; +*************** +*** 227,241 **** + typedef struct tagNMTTDISPINFO_NEW + { + NMHDR hdr; +! LPTSTR lpszText; + char szText[80]; + HINSTANCE hinst; + UINT uFlags; + LPARAM lParam; + } NMTTDISPINFO_NEW; + +- #include <poppack.h> +- + typedef HRESULT (WINAPI* DLLGETVERSIONPROC)(DLLVERSIONINFO *); + #ifndef TTM_SETMAXTIPWIDTH + # define TTM_SETMAXTIPWIDTH (WM_USER+24) +--- 229,241 ---- + typedef struct tagNMTTDISPINFO_NEW + { + NMHDR hdr; +! LPSTR lpszText; + char szText[80]; + HINSTANCE hinst; + UINT uFlags; + LPARAM lParam; + } NMTTDISPINFO_NEW; + + typedef HRESULT (WINAPI* DLLGETVERSIONPROC)(DLLVERSIONINFO *); + #ifndef TTM_SETMAXTIPWIDTH + # define TTM_SETMAXTIPWIDTH (WM_USER+24) +*** ../vim-7.2.322/src/version.c 2009-12-24 15:45:53.000000000 +0100 +--- src/version.c 2009-12-24 16:08:33.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 323, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +46. Your wife makes a new rule: "The computer cannot come to bed." + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.324 b/source/ap/vim/patches/7.2.324 new file mode 100644 index 000000000..8f61b8acb --- /dev/null +++ b/source/ap/vim/patches/7.2.324 @@ -0,0 +1,66 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.324 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.324 +Problem: A negative column argument in setpos() may cause a crash. +Solution: Check for invalid column number. (James Vega) +Files: src/eval.c, src/misc2.c + + +*** ../vim-7.2.323/src/eval.c 2009-12-24 15:00:31.000000000 +0100 +--- src/eval.c 2009-12-31 13:09:19.000000000 +0100 +*************** +*** 15542,15548 **** + { + if (list2fpos(&argvars[1], &pos, &fnum) == OK) + { +! --pos.col; + if (name[0] == '.' && name[1] == NUL) + { + /* set cursor */ +--- 15542,15549 ---- + { + if (list2fpos(&argvars[1], &pos, &fnum) == OK) + { +! if (--pos.col < 0) +! pos.col = 0; + if (name[0] == '.' && name[1] == NUL) + { + /* set cursor */ +*** ../vim-7.2.323/src/misc2.c 2009-11-25 17:15:16.000000000 +0100 +--- src/misc2.c 2009-12-31 13:12:36.000000000 +0100 +*************** +*** 528,533 **** +--- 528,535 ---- + #endif + } + } ++ else if (curwin->w_cursor.col < 0) ++ curwin->w_cursor.col = 0; + + #ifdef FEAT_VIRTUALEDIT + /* If virtual editing is on, we can leave the cursor on the old position, +*** ../vim-7.2.323/src/version.c 2009-12-24 16:11:24.000000000 +0100 +--- src/version.c 2009-12-31 13:17:25.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 324, + /**/ + +-- +"Thou shalt not follow the Null Pointer, for at its end Chaos and +Madness lie." + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.325 b/source/ap/vim/patches/7.2.325 new file mode 100644 index 000000000..77a6e089f --- /dev/null +++ b/source/ap/vim/patches/7.2.325 @@ -0,0 +1,52 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.325 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.325 +Problem: A stray "w" in the startup vimrc file causes the edited file to be + replaced with an empty file. (Stone Kang). +Solution: Do not write a buffer when it has never been loaded. +Files: src/fileio.c + + +*** ../vim-7.2.324/src/fileio.c 2009-12-02 13:32:10.000000000 +0100 +--- src/fileio.c 2009-12-31 14:08:31.000000000 +0100 +*************** +*** 2981,2986 **** +--- 2981,2993 ---- + + if (fname == NULL || *fname == NUL) /* safety check */ + return FAIL; ++ if (buf->b_ml.ml_mfp == NULL) ++ { ++ /* This can happen during startup when there is a stray "w" in the ++ * vimrc file. */ ++ EMSG(_(e_emptybuf)); ++ return FAIL; ++ } + + /* + * Disallow writing from .exrc and .vimrc in current directory for +*** ../vim-7.2.324/src/version.c 2009-12-31 13:18:05.000000000 +0100 +--- src/version.c 2009-12-31 14:52:29.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 325, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +74. Your most erotic dreams are about cybersex + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.326 b/source/ap/vim/patches/7.2.326 new file mode 100644 index 000000000..8e988a8da --- /dev/null +++ b/source/ap/vim/patches/7.2.326 @@ -0,0 +1,54 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.326 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.326 +Problem: Win32: $HOME doesn't work when %HOMEPATH% is not defined. +Solution: Use "\" for %HOMEPATH% when it is not defined. +Files: src/misc1.c + + +*** ../vim-7.2.325/src/misc1.c 2009-12-02 17:47:46.000000000 +0100 +--- src/misc1.c 2010-01-05 19:53:23.000000000 +0100 +*************** +*** 3470,3476 **** + + homedrive = mch_getenv((char_u *)"HOMEDRIVE"); + homepath = mch_getenv((char_u *)"HOMEPATH"); +! if (homedrive != NULL && homepath != NULL + && STRLEN(homedrive) + STRLEN(homepath) < MAXPATHL) + { + sprintf((char *)NameBuff, "%s%s", homedrive, homepath); +--- 3470,3478 ---- + + homedrive = mch_getenv((char_u *)"HOMEDRIVE"); + homepath = mch_getenv((char_u *)"HOMEPATH"); +! if (homepath == NULL || *homepath == NUL) +! homepath = "\\"; +! if (homedrive != NULL + && STRLEN(homedrive) + STRLEN(homepath) < MAXPATHL) + { + sprintf((char *)NameBuff, "%s%s", homedrive, homepath); +*** ../vim-7.2.325/src/version.c 2009-12-31 14:52:48.000000000 +0100 +--- src/version.c 2010-01-06 17:39:23.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 326, + /**/ + +-- +From "know your smileys": + :q vi user saying, "How do I get out of this damn emacs editor?" + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.327 b/source/ap/vim/patches/7.2.327 new file mode 100644 index 000000000..4bfb077c8 --- /dev/null +++ b/source/ap/vim/patches/7.2.327 @@ -0,0 +1,323 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.327 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.327 +Problem: Unused functions in Workshop. +Solution: Add "#if 0" and minor cleanup. (Dominique Pelle) +Files: src/workshop.c, src/integration.c, src/ingegration.h + + +*** ../vim-7.2.326/src/workshop.c 2009-05-21 23:25:38.000000000 +0200 +--- src/workshop.c 2010-01-06 18:10:10.000000000 +0100 +*************** +*** 56,67 **** + static void load_window(char *, int lnum); + static void warp_to_pc(int); + #ifdef FEAT_BEVAL +! void workshop_beval_cb(BalloonEval *, int); + #endif + static char *fixAccelText(char *); + static void addMenu(char *, char *, char *); + static char *lookupVerb(char *, int); +- static int computeIndex(int, char_u *, int); + static void coloncmd(char *, Boolean); + + extern Widget vimShell; +--- 56,67 ---- + static void load_window(char *, int lnum); + static void warp_to_pc(int); + #ifdef FEAT_BEVAL +! void workshop_beval_cb(BalloonEval *, int); +! static int computeIndex(int, char_u *, int); + #endif + static char *fixAccelText(char *); + static void addMenu(char *, char *, char *); + static char *lookupVerb(char *, int); + static void coloncmd(char *, Boolean); + + extern Widget vimShell; +*************** +*** 1624,1631 **** + } + } + } +- #endif +- + + static int + computeIndex( +--- 1624,1629 ---- +*************** +*** 1649,1654 **** +--- 1647,1653 ---- + + return -1; + } ++ #endif + + static void + addMenu( +*** ../vim-7.2.326/src/integration.c 2008-06-24 22:27:10.000000000 +0200 +--- src/integration.c 2010-01-06 18:18:11.000000000 +0100 +*************** +*** 78,84 **** + + /* Functions private to this file */ + static void workshop_connection_closed(void); +! static void messageFromEserve(XtPointer clientData, int *NOTUSED1, XtInputId *NOTUSED2); + static void workshop_disconnect(void); + static void workshop_sensitivity(int num, char *table); + static void adjust_sign_name(char *filename); +--- 78,84 ---- + + /* Functions private to this file */ + static void workshop_connection_closed(void); +! static void messageFromEserve(XtPointer clientData, int *dum1, XtInputId *dum2); + static void workshop_disconnect(void); + static void workshop_sensitivity(int num, char *table); + static void adjust_sign_name(char *filename); +*************** +*** 157,165 **** + + } + +- /*ARGSUSED*/ + void +! messageFromEserve(XtPointer clientData, int *NOTUSED1, XtInputId *NOTUSED2) + { + char *cmd; /* the 1st word of the command */ + +--- 157,166 ---- + + } + + void +! messageFromEserve(XtPointer clientData UNUSED, +! int *dum1 UNUSED, +! XtInputId *dum2 UNUSED) + { + char *cmd; /* the 1st word of the command */ + +*************** +*** 199,205 **** + if (sign) { + sign++; + } +! /* Change sign name to accomodate a different size? */ + adjust_sign_name(sign); + workshop_add_mark_type(idx, color, sign); + } +--- 200,206 ---- + if (sign) { + sign++; + } +! /* Change sign name to accommodate a different size? */ + adjust_sign_name(sign); + workshop_add_mark_type(idx, color, sign); + } +*************** +*** 580,586 **** + #endif + + +! /* Change sign name to accomodate a different size: + * Create the filename based on the height. The filename format + * of multisize icons are: + * x.xpm : largest icon +--- 581,587 ---- + #endif + + +! /* Change sign name to accommodate a different size: + * Create the filename based on the height. The filename format + * of multisize icons are: + * x.xpm : largest icon +*************** +*** 614,619 **** +--- 615,621 ---- + strcpy(s, ".xpm"); + } + ++ #if 0 + /* Were we invoked by WorkShop? This function can be used early during startup + if you want to do things differently if the editor is started standalone + or in WorkShop mode. For example, in standalone mode you may not want to +*************** +*** 627,632 **** +--- 629,635 ---- + } + return result; + } ++ #endif + + /* Connect back to eserve */ + void workshop_connect(XtAppContext context) +*************** +*** 750,755 **** +--- 753,759 ---- + * Utility functions + */ + ++ #if 0 + /* Set icon for the window */ + void + workshop_set_icon(Display *display, Widget shell, char **xpmdata, +*************** +*** 793,798 **** +--- 797,803 ---- + } + XtFree((char *)xpmAttributes.colorsymbols); + } ++ #endif + + /* Minimize and maximize shells. From libutil's shell.cc. */ + +*************** +*** 927,933 **** + return success; + } + +! + Boolean workshop_get_rows_cols(int *rows, int *cols) + { + static int r = 0; +--- 932,938 ---- + return success; + } + +! #if 0 + Boolean workshop_get_rows_cols(int *rows, int *cols) + { + static int r = 0; +*************** +*** 958,963 **** +--- 963,969 ---- + } + return success; + } ++ #endif + + /* + * Toolbar code +*************** +*** 1043,1054 **** + } + + +! + /* + * Send information to eserve on certain editor events + * You must make sure these are called when necessary + */ +- + void workshop_file_closed(char *filename) + { + char buffer[2*MAXPATHLEN]; +--- 1049,1059 ---- + } + + +! #if 0 + /* + * Send information to eserve on certain editor events + * You must make sure these are called when necessary + */ + void workshop_file_closed(char *filename) + { + char buffer[2*MAXPATHLEN]; +*************** +*** 1056,1061 **** +--- 1061,1067 ---- + NOCATGETS("deletedFile %s\n"), filename); + write(sd, buffer, strlen(buffer)); + } ++ #endif + + void workshop_file_closed_lineno(char *filename, int lineno) + { +*************** +*** 1086,1106 **** + workshop_moved_marks(filename); + } + +! void workshop_move_mark(char *filename, int markId, int newLineno) + { + char buffer[2*MAXPATHLEN]; + vim_snprintf(buffer, sizeof(buffer), +! NOCATGETS("moveMark %s %d %d\n"), filename, markId, newLineno); + write(sd, buffer, strlen(buffer)); + } + +! void workshop_file_modified(char *filename) + { + char buffer[2*MAXPATHLEN]; + vim_snprintf(buffer, sizeof(buffer), +! NOCATGETS("modifiedFile %s\n"), filename); + write(sd, buffer, strlen(buffer)); + } + + void workshop_frame_moved(int new_x, int new_y, int new_w, int new_h) + { +--- 1092,1114 ---- + workshop_moved_marks(filename); + } + +! #if 0 +! void workshop_file_modified(char *filename) + { + char buffer[2*MAXPATHLEN]; + vim_snprintf(buffer, sizeof(buffer), +! NOCATGETS("modifiedFile %s\n"), filename); + write(sd, buffer, strlen(buffer)); + } + +! void workshop_move_mark(char *filename, int markId, int newLineno) + { + char buffer[2*MAXPATHLEN]; + vim_snprintf(buffer, sizeof(buffer), +! NOCATGETS("moveMark %s %d %d\n"), filename, markId, newLineno); + write(sd, buffer, strlen(buffer)); + } ++ #endif + + void workshop_frame_moved(int new_x, int new_y, int new_w, int new_h) + { +*************** +*** 1179,1188 **** +--- 1187,1198 ---- + } + + /* Send a message to eserve */ ++ #if defined(NOHANDS_SUPPORT_FUNCTIONS) || defined(FEAT_BEVAL) + void workshop_send_message(char *buf) + { + write(sd, buf, strlen(buf)); + } ++ #endif + + /* Some methods, like currentFile, cursorPos, etc. are missing here. + * But it looks like these are used for NoHands testing only so we +*** ../vim-7.2.326/src/version.c 2010-01-06 17:46:03.000000000 +0100 +--- src/version.c 2010-01-06 18:20:41.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 327, + /**/ + +-- +From "know your smileys": + (:-# Said something he shouldn't have + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.328 b/source/ap/vim/patches/7.2.328 new file mode 100644 index 000000000..f547fb944 --- /dev/null +++ b/source/ap/vim/patches/7.2.328 @@ -0,0 +1,52 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.328 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.328 +Problem: has("win64") does not return 1 on 64 bit MS-Windows version. +Solution: Also check for _WIN64 besides WIN64. +Files: src/eval.c + + +*** ../vim-7.2.327/src/eval.c 2009-12-31 13:18:05.000000000 +0100 +--- src/eval.c 2010-01-06 16:28:23.000000000 +0100 +*************** +*** 11453,11459 **** + #if defined(UNIX) && (defined(__CYGWIN32__) || defined(__CYGWIN__)) + "win32unix", + #endif +! #ifdef WIN64 + "win64", + #endif + #ifdef EBCDIC +--- 11453,11459 ---- + #if defined(UNIX) && (defined(__CYGWIN32__) || defined(__CYGWIN__)) + "win32unix", + #endif +! #if defined(WIN64) || defined(_WIN64) + "win64", + #endif + #ifdef EBCDIC +*** ../vim-7.2.327/src/version.c 2010-01-06 18:24:53.000000000 +0100 +--- src/version.c 2010-01-12 12:10:06.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 328, + /**/ + +-- +From "know your smileys": + :.-( Crying + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.329 b/source/ap/vim/patches/7.2.329 new file mode 100644 index 000000000..f92bc655b --- /dev/null +++ b/source/ap/vim/patches/7.2.329 @@ -0,0 +1,48 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.329 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.329 +Problem: "g_" doesn't position cursor correctly when in Visual mode and + 'selection' is "exclusive". (Ben Fritz) +Solution: Call adjust_for_sel(). +Files: src/normal.c + + +*** ../vim-7.2.328/src/normal.c 2009-12-24 15:00:31.000000000 +0100 +--- src/normal.c 2010-01-09 15:19:47.000000000 +0100 +*************** +*** 7873,7878 **** +--- 7873,7881 ---- + && vim_iswhite(ptr[curwin->w_cursor.col])) + --curwin->w_cursor.col; + curwin->w_set_curswant = TRUE; ++ #ifdef FEAT_VISUAL ++ adjust_for_sel(cap); ++ #endif + } + break; + +*** ../vim-7.2.328/src/version.c 2010-01-12 12:48:40.000000000 +0100 +--- src/version.c 2010-01-12 15:41:13.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 329, + /**/ + +-- +From "know your smileys": + |-( Contact lenses, but has lost them + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.330 b/source/ap/vim/patches/7.2.330 new file mode 100644 index 000000000..0d9c3f1e4 --- /dev/null +++ b/source/ap/vim/patches/7.2.330 @@ -0,0 +1,1531 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.330 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.330 +Problem: Tables for Unicode case operators are outdated. +Solution: Add a Vim script for generating the tables. Include tables for + Unicode 5.2. +Files: runtime/tools/README.txt, runtime/tools/unicode.vim, src/mbyte.c + + +*** ../vim-7.2.329/runtime/tools/README.txt 2005-12-02 01:47:43.000000000 +0100 +--- runtime/tools/README.txt 2010-01-12 19:43:13.000000000 +0100 +*************** +*** 32,35 **** +--- 32,37 ---- + xcmdsrv_client.c: Example for a client program that communicates with a Vim + server through the X-Windows interface. + ++ unicode.vim Vim script to generate tables for src/mbyte.c. ++ + [xxd (and tee for OS/2) can be found in the src directory] +*** ../vim-7.2.329/runtime/tools/unicode.vim 2010-01-12 19:47:33.000000000 +0100 +--- runtime/tools/unicode.vim 2010-01-12 19:42:14.000000000 +0100 +*************** +*** 0 **** +--- 1,280 ---- ++ " Script to extract tables from Unicode .txt files, to be used in src/mbyte.c. ++ " The format of the UnicodeData.txt file is explained here: ++ " http://www.unicode.org/Public/5.1.0/ucd/UCD.html ++ " For the other files see the header. ++ " ++ " Usage: Vim -S <this-file> ++ " ++ " Author: Bram Moolenaar ++ " Last Update: 2010 Jan 12 ++ ++ " Parse lines of UnicodeData.txt. Creates a list of lists in s:dataprops. ++ func! ParseDataToProps() ++ let s:dataprops = [] ++ let lnum = 1 ++ while lnum <= line('$') ++ let l = split(getline(lnum), '\s*;\s*', 1) ++ if len(l) != 15 ++ echoerr 'Found ' . len(l) . ' items in line ' . lnum . ', expected 15' ++ return ++ endif ++ call add(s:dataprops, l) ++ let lnum += 1 ++ endwhile ++ endfunc ++ ++ " Parse lines of CaseFolding.txt. Creates a list of lists in s:foldprops. ++ func! ParseFoldProps() ++ let s:foldprops = [] ++ let lnum = 1 ++ while lnum <= line('$') ++ let line = getline(lnum) ++ if line !~ '^#' && line !~ '^\s*$' ++ let l = split(line, '\s*;\s*', 1) ++ if len(l) != 4 ++ echoerr 'Found ' . len(l) . ' items in line ' . lnum . ', expected 4' ++ return ++ endif ++ call add(s:foldprops, l) ++ endif ++ let lnum += 1 ++ endwhile ++ endfunc ++ ++ " Parse lines of EastAsianWidth.txt. Creates a list of lists in s:widthprops. ++ func! ParseWidthProps() ++ let s:widthprops = [] ++ let lnum = 1 ++ while lnum <= line('$') ++ let line = getline(lnum) ++ if line !~ '^#' && line !~ '^\s*$' ++ let l = split(line, '\s*;\s*', 1) ++ if len(l) != 2 ++ echoerr 'Found ' . len(l) . ' items in line ' . lnum . ', expected 2' ++ return ++ endif ++ call add(s:widthprops, l) ++ endif ++ let lnum += 1 ++ endwhile ++ endfunc ++ ++ " Build the toLower or toUpper table in a new buffer. ++ " Uses s:dataprops. ++ func! BuildCaseTable(name, index) ++ let start = -1 ++ let end = -1 ++ let step = 0 ++ let add = -1 ++ let ranges = [] ++ for p in s:dataprops ++ if p[a:index] != '' ++ let n = ('0x' . p[0]) + 0 ++ let nl = ('0x' . p[a:index]) + 0 ++ if start >= 0 && add == nl - n && (step == 0 || n - end == step) ++ " continue with same range. ++ let step = n - end ++ let end = n ++ else ++ if start >= 0 ++ " produce previous range ++ call Range(ranges, start, end, step, add) ++ endif ++ let start = n ++ let end = n ++ let step = 0 ++ let add = nl - n ++ endif ++ endif ++ endfor ++ if start >= 0 ++ call Range(ranges, start, end, step, add) ++ endif ++ ++ " New buffer to put the result in. ++ new ++ exe "file to" . a:name ++ call setline(1, "static convertStruct to" . a:name . "[] =") ++ call setline(2, "{") ++ call append('$', ranges) ++ call setline('$', getline('$')[:-2]) " remove last comma ++ call setline(line('$') + 1, "};") ++ wincmd p ++ endfunc ++ ++ " Build the foldCase table in a new buffer. ++ " Uses s:foldprops. ++ func! BuildFoldTable() ++ let start = -1 ++ let end = -1 ++ let step = 0 ++ let add = -1 ++ let ranges = [] ++ for p in s:foldprops ++ if p[1] == 'C' || p[1] == 'S' ++ let n = ('0x' . p[0]) + 0 ++ let nl = ('0x' . p[2]) + 0 ++ if start >= 0 && add == nl - n && (step == 0 || n - end == step) ++ " continue with same range. ++ let step = n - end ++ let end = n ++ else ++ if start >= 0 ++ " produce previous range ++ call Range(ranges, start, end, step, add) ++ endif ++ let start = n ++ let end = n ++ let step = 0 ++ let add = nl - n ++ endif ++ endif ++ endfor ++ if start >= 0 ++ call Range(ranges, start, end, step, add) ++ endif ++ ++ " New buffer to put the result in. ++ new ++ file foldCase ++ call setline(1, "static convertStruct foldCase[] =") ++ call setline(2, "{") ++ call append('$', ranges) ++ call setline('$', getline('$')[:-2]) " remove last comma ++ call setline(line('$') + 1, "};") ++ wincmd p ++ endfunc ++ ++ func! Range(ranges, start, end, step, add) ++ let s = printf("\t{0x%x,0x%x,%d,%d},", a:start, a:end, a:step == 0 ? -1 : a:step, a:add) ++ call add(a:ranges, s) ++ endfunc ++ ++ " Build the combining table. ++ " Uses s:dataprops. ++ func! BuildCombiningTable() ++ let start = -1 ++ let end = -1 ++ let ranges = [] ++ for p in s:dataprops ++ if p[2] == 'Mn' || p[2] == 'Mc' || p[2] == 'Me' ++ let n = ('0x' . p[0]) + 0 ++ if start >= 0 && end + 1 == n ++ " continue with same range. ++ let end = n ++ else ++ if start >= 0 ++ " produce previous range ++ call add(ranges, printf("\t{0x%04x, 0x%04x},", start, end)) ++ endif ++ let start = n ++ let end = n ++ endif ++ endif ++ endfor ++ if start >= 0 ++ call add(ranges, printf("\t{0x%04x, 0x%04x},", start, end)) ++ endif ++ ++ " New buffer to put the result in. ++ new ++ file combining ++ call setline(1, " static struct interval combining[] =") ++ call setline(2, " {") ++ call append('$', ranges) ++ call setline('$', getline('$')[:-2]) " remove last comma ++ call setline(line('$') + 1, " };") ++ wincmd p ++ endfunc ++ ++ " Build the ambiguous table in a new buffer. ++ " Uses s:widthprops and s:dataprops. ++ func! BuildAmbiguousTable() ++ let start = -1 ++ let end = -1 ++ let ranges = [] ++ let dataidx = 0 ++ for p in s:widthprops ++ if p[1][0] == 'A' ++ let n = ('0x' . p[0]) + 0 ++ " Find this char in the data table. ++ while 1 ++ let dn = ('0x' . s:dataprops[dataidx][0]) + 0 ++ if dn >= n ++ break ++ endif ++ let dataidx += 1 ++ endwhile ++ if dn != n ++ echoerr "Cannot find character " . n . " in data table" ++ endif ++ " Only use the char when it's not a composing char. ++ let dp = s:dataprops[dataidx] ++ if dp[2] != 'Mn' && dp[2] != 'Mc' && dp[2] != 'Me' ++ if start >= 0 && end + 1 == n ++ " continue with same range. ++ let end = n ++ else ++ if start >= 0 ++ " produce previous range ++ call add(ranges, printf("\t{0x%04x, 0x%04x},", start, end)) ++ endif ++ let start = n ++ if p[0] =~ '\.\.' ++ let end = ('0x' . substitute(p[0], '.*\.\.', '', '')) + 0 ++ else ++ let end = n ++ endif ++ endif ++ endif ++ endif ++ endfor ++ if start >= 0 ++ call add(ranges, printf("\t{0x%04x, 0x%04x},", start, end)) ++ endif ++ ++ " New buffer to put the result in. ++ new ++ file ambiguous ++ call setline(1, " static struct interval ambiguous[] =") ++ call setline(2, " {") ++ call append('$', ranges) ++ call setline('$', getline('$')[:-2]) " remove last comma ++ call setline(line('$') + 1, " };") ++ wincmd p ++ endfunc ++ ++ ++ ++ " Edit the Unicode text file. Requires the netrw plugin. ++ edit http://unicode.org/Public/UNIDATA/UnicodeData.txt ++ ++ " Parse each line, create a list of lists. ++ call ParseDataToProps() ++ ++ " Build the toLower table. ++ call BuildCaseTable("Lower", 13) ++ ++ " Build the toUpper table. ++ call BuildCaseTable("Upper", 12) ++ ++ " Build the ranges of composing chars. ++ call BuildCombiningTable() ++ ++ " Edit the case folding text file. Requires the netrw plugin. ++ edit http://www.unicode.org/Public/UNIDATA/CaseFolding.txt ++ ++ " Parse each line, create a list of lists. ++ call ParseFoldProps() ++ ++ " Build the foldCase table. ++ call BuildFoldTable() ++ ++ " Edit the width text file. Requires the netrw plugin. ++ edit http://www.unicode.org/Public/UNIDATA/EastAsianWidth.txt ++ ++ " Parse each line, create a list of lists. ++ call ParseWidthProps() ++ ++ " Build the ambiguous table. ++ call BuildAmbiguousTable() +*** ../vim-7.2.329/src/mbyte.c 2009-12-02 15:03:24.000000000 +0100 +--- src/mbyte.c 2010-01-12 19:35:49.000000000 +0100 +*************** +*** 26,32 **** + * Recognizing bytes is easy: 0xxx.xxxx is a single-byte + * char, 10xx.xxxx is a trailing byte, 11xx.xxxx is a leading + * byte of a multi-byte character. +! * To make things complicated, up to two composing characters + * are allowed. These are drawn on top of the first char. + * For most editing the sequence of bytes with composing + * characters included is considered to be one character. +--- 26,32 ---- + * Recognizing bytes is easy: 0xxx.xxxx is a single-byte + * char, 10xx.xxxx is a trailing byte, 11xx.xxxx is a leading + * byte of a multi-byte character. +! * To make things complicated, up to six composing characters + * are allowed. These are drawn on top of the first char. + * For most editing the sequence of bytes with composing + * characters included is considered to be one character. +*************** +*** 1153,1160 **** + + struct interval + { +! unsigned short first; +! unsigned short last; + }; + static int intable __ARGS((struct interval *table, size_t size, int c)); + +--- 1153,1160 ---- + + struct interval + { +! long first; +! long last; + }; + static int intable __ARGS((struct interval *table, size_t size, int c)); + +*************** +*** 1200,1261 **** + utf_char2cells(c) + int c; + { +! /* sorted list of non-overlapping intervals of East Asian Ambiguous +! * characters, generated with: +! * "uniset +WIDTH-A -cat=Me -cat=Mn -cat=Cf c" */ +! static struct interval ambiguous[] = { +! {0x00A1, 0x00A1}, {0x00A4, 0x00A4}, {0x00A7, 0x00A8}, +! {0x00AA, 0x00AA}, {0x00AE, 0x00AE}, {0x00B0, 0x00B4}, +! {0x00B6, 0x00BA}, {0x00BC, 0x00BF}, {0x00C6, 0x00C6}, +! {0x00D0, 0x00D0}, {0x00D7, 0x00D8}, {0x00DE, 0x00E1}, +! {0x00E6, 0x00E6}, {0x00E8, 0x00EA}, {0x00EC, 0x00ED}, +! {0x00F0, 0x00F0}, {0x00F2, 0x00F3}, {0x00F7, 0x00FA}, +! {0x00FC, 0x00FC}, {0x00FE, 0x00FE}, {0x0101, 0x0101}, +! {0x0111, 0x0111}, {0x0113, 0x0113}, {0x011B, 0x011B}, +! {0x0126, 0x0127}, {0x012B, 0x012B}, {0x0131, 0x0133}, +! {0x0138, 0x0138}, {0x013F, 0x0142}, {0x0144, 0x0144}, +! {0x0148, 0x014B}, {0x014D, 0x014D}, {0x0152, 0x0153}, +! {0x0166, 0x0167}, {0x016B, 0x016B}, {0x01CE, 0x01CE}, +! {0x01D0, 0x01D0}, {0x01D2, 0x01D2}, {0x01D4, 0x01D4}, +! {0x01D6, 0x01D6}, {0x01D8, 0x01D8}, {0x01DA, 0x01DA}, +! {0x01DC, 0x01DC}, {0x0251, 0x0251}, {0x0261, 0x0261}, +! {0x02C4, 0x02C4}, {0x02C7, 0x02C7}, {0x02C9, 0x02CB}, +! {0x02CD, 0x02CD}, {0x02D0, 0x02D0}, {0x02D8, 0x02DB}, +! {0x02DD, 0x02DD}, {0x02DF, 0x02DF}, {0x0391, 0x03A1}, +! {0x03A3, 0x03A9}, {0x03B1, 0x03C1}, {0x03C3, 0x03C9}, +! {0x0401, 0x0401}, {0x0410, 0x044F}, {0x0451, 0x0451}, +! {0x2010, 0x2010}, {0x2013, 0x2016}, {0x2018, 0x2019}, +! {0x201C, 0x201D}, {0x2020, 0x2022}, {0x2024, 0x2027}, +! {0x2030, 0x2030}, {0x2032, 0x2033}, {0x2035, 0x2035}, +! {0x203B, 0x203B}, {0x203E, 0x203E}, {0x2074, 0x2074}, +! {0x207F, 0x207F}, {0x2081, 0x2084}, {0x20AC, 0x20AC}, +! {0x2103, 0x2103}, {0x2105, 0x2105}, {0x2109, 0x2109}, +! {0x2113, 0x2113}, {0x2116, 0x2116}, {0x2121, 0x2122}, +! {0x2126, 0x2126}, {0x212B, 0x212B}, {0x2153, 0x2154}, +! {0x215B, 0x215E}, {0x2160, 0x216B}, {0x2170, 0x2179}, +! {0x2190, 0x2199}, {0x21B8, 0x21B9}, {0x21D2, 0x21D2}, +! {0x21D4, 0x21D4}, {0x21E7, 0x21E7}, {0x2200, 0x2200}, +! {0x2202, 0x2203}, {0x2207, 0x2208}, {0x220B, 0x220B}, +! {0x220F, 0x220F}, {0x2211, 0x2211}, {0x2215, 0x2215}, +! {0x221A, 0x221A}, {0x221D, 0x2220}, {0x2223, 0x2223}, +! {0x2225, 0x2225}, {0x2227, 0x222C}, {0x222E, 0x222E}, +! {0x2234, 0x2237}, {0x223C, 0x223D}, {0x2248, 0x2248}, +! {0x224C, 0x224C}, {0x2252, 0x2252}, {0x2260, 0x2261}, +! {0x2264, 0x2267}, {0x226A, 0x226B}, {0x226E, 0x226F}, +! {0x2282, 0x2283}, {0x2286, 0x2287}, {0x2295, 0x2295}, +! {0x2299, 0x2299}, {0x22A5, 0x22A5}, {0x22BF, 0x22BF}, +! {0x2312, 0x2312}, {0x2460, 0x24E9}, {0x24EB, 0x254B}, +! {0x2550, 0x2573}, {0x2580, 0x258F}, {0x2592, 0x2595}, +! {0x25A0, 0x25A1}, {0x25A3, 0x25A9}, {0x25B2, 0x25B3}, +! {0x25B6, 0x25B7}, {0x25BC, 0x25BD}, {0x25C0, 0x25C1}, +! {0x25C6, 0x25C8}, {0x25CB, 0x25CB}, {0x25CE, 0x25D1}, +! {0x25E2, 0x25E5}, {0x25EF, 0x25EF}, {0x2605, 0x2606}, +! {0x2609, 0x2609}, {0x260E, 0x260F}, {0x2614, 0x2615}, +! {0x261C, 0x261C}, {0x261E, 0x261E}, {0x2640, 0x2640}, +! {0x2642, 0x2642}, {0x2660, 0x2661}, {0x2663, 0x2665}, +! {0x2667, 0x266A}, {0x266C, 0x266D}, {0x266F, 0x266F}, +! {0x273D, 0x273D}, {0x2776, 0x277F}, {0xE000, 0xF8FF}, +! {0xFFFD, 0xFFFD}, /* {0xF0000, 0xFFFFD}, {0x100000, 0x10FFFD} */ + }; + + if (c >= 0x100) +--- 1200,1390 ---- + utf_char2cells(c) + int c; + { +! /* Sorted list of non-overlapping intervals of East Asian Ambiguous +! * characters, generated with ../runtime/tools/unicode.vim. */ +! static struct interval ambiguous[] = +! { +! {0x00a1, 0x00a1}, +! {0x00a4, 0x00a4}, +! {0x00a7, 0x00a8}, +! {0x00aa, 0x00aa}, +! {0x00ad, 0x00ae}, +! {0x00b0, 0x00b4}, +! {0x00b6, 0x00ba}, +! {0x00bc, 0x00bf}, +! {0x00c6, 0x00c6}, +! {0x00d0, 0x00d0}, +! {0x00d7, 0x00d8}, +! {0x00de, 0x00e1}, +! {0x00e6, 0x00e6}, +! {0x00e8, 0x00ea}, +! {0x00ec, 0x00ed}, +! {0x00f0, 0x00f0}, +! {0x00f2, 0x00f3}, +! {0x00f7, 0x00fa}, +! {0x00fc, 0x00fc}, +! {0x00fe, 0x00fe}, +! {0x0101, 0x0101}, +! {0x0111, 0x0111}, +! {0x0113, 0x0113}, +! {0x011b, 0x011b}, +! {0x0126, 0x0127}, +! {0x012b, 0x012b}, +! {0x0131, 0x0133}, +! {0x0138, 0x0138}, +! {0x013f, 0x0142}, +! {0x0144, 0x0144}, +! {0x0148, 0x014b}, +! {0x014d, 0x014d}, +! {0x0152, 0x0153}, +! {0x0166, 0x0167}, +! {0x016b, 0x016b}, +! {0x01ce, 0x01ce}, +! {0x01d0, 0x01d0}, +! {0x01d2, 0x01d2}, +! {0x01d4, 0x01d4}, +! {0x01d6, 0x01d6}, +! {0x01d8, 0x01d8}, +! {0x01da, 0x01da}, +! {0x01dc, 0x01dc}, +! {0x0251, 0x0251}, +! {0x0261, 0x0261}, +! {0x02c4, 0x02c4}, +! {0x02c7, 0x02c7}, +! {0x02c9, 0x02cb}, +! {0x02cd, 0x02cd}, +! {0x02d0, 0x02d0}, +! {0x02d8, 0x02db}, +! {0x02dd, 0x02dd}, +! {0x02df, 0x02df}, +! {0x0391, 0x03a1}, +! {0x03a3, 0x03a9}, +! {0x03b1, 0x03c1}, +! {0x03c3, 0x03c9}, +! {0x0401, 0x0401}, +! {0x0410, 0x044f}, +! {0x0451, 0x0451}, +! {0x2010, 0x2010}, +! {0x2013, 0x2016}, +! {0x2018, 0x2019}, +! {0x201c, 0x201d}, +! {0x2020, 0x2022}, +! {0x2024, 0x2027}, +! {0x2030, 0x2030}, +! {0x2032, 0x2033}, +! {0x2035, 0x2035}, +! {0x203b, 0x203b}, +! {0x203e, 0x203e}, +! {0x2074, 0x2074}, +! {0x207f, 0x207f}, +! {0x2081, 0x2084}, +! {0x20ac, 0x20ac}, +! {0x2103, 0x2103}, +! {0x2105, 0x2105}, +! {0x2109, 0x2109}, +! {0x2113, 0x2113}, +! {0x2116, 0x2116}, +! {0x2121, 0x2122}, +! {0x2126, 0x2126}, +! {0x212b, 0x212b}, +! {0x2153, 0x2154}, +! {0x215b, 0x215e}, +! {0x2160, 0x216b}, +! {0x2170, 0x2179}, +! {0x2189, 0x2189}, +! {0x2190, 0x2199}, +! {0x21b8, 0x21b9}, +! {0x21d2, 0x21d2}, +! {0x21d4, 0x21d4}, +! {0x21e7, 0x21e7}, +! {0x2200, 0x2200}, +! {0x2202, 0x2203}, +! {0x2207, 0x2208}, +! {0x220b, 0x220b}, +! {0x220f, 0x220f}, +! {0x2211, 0x2211}, +! {0x2215, 0x2215}, +! {0x221a, 0x221a}, +! {0x221d, 0x2220}, +! {0x2223, 0x2223}, +! {0x2225, 0x2225}, +! {0x2227, 0x222c}, +! {0x222e, 0x222e}, +! {0x2234, 0x2237}, +! {0x223c, 0x223d}, +! {0x2248, 0x2248}, +! {0x224c, 0x224c}, +! {0x2252, 0x2252}, +! {0x2260, 0x2261}, +! {0x2264, 0x2267}, +! {0x226a, 0x226b}, +! {0x226e, 0x226f}, +! {0x2282, 0x2283}, +! {0x2286, 0x2287}, +! {0x2295, 0x2295}, +! {0x2299, 0x2299}, +! {0x22a5, 0x22a5}, +! {0x22bf, 0x22bf}, +! {0x2312, 0x2312}, +! {0x2460, 0x24e9}, +! {0x24eb, 0x254b}, +! {0x2550, 0x2573}, +! {0x2580, 0x258f}, +! {0x2592, 0x2595}, +! {0x25a0, 0x25a1}, +! {0x25a3, 0x25a9}, +! {0x25b2, 0x25b3}, +! {0x25b6, 0x25b7}, +! {0x25bc, 0x25bd}, +! {0x25c0, 0x25c1}, +! {0x25c6, 0x25c8}, +! {0x25cb, 0x25cb}, +! {0x25ce, 0x25d1}, +! {0x25e2, 0x25e5}, +! {0x25ef, 0x25ef}, +! {0x2605, 0x2606}, +! {0x2609, 0x2609}, +! {0x260e, 0x260f}, +! {0x2614, 0x2615}, +! {0x261c, 0x261c}, +! {0x261e, 0x261e}, +! {0x2640, 0x2640}, +! {0x2642, 0x2642}, +! {0x2660, 0x2661}, +! {0x2663, 0x2665}, +! {0x2667, 0x266a}, +! {0x266c, 0x266d}, +! {0x266f, 0x266f}, +! {0x269e, 0x269f}, +! {0x26be, 0x26bf}, +! {0x26c4, 0x26cd}, +! {0x26cf, 0x26e1}, +! {0x26e3, 0x26e3}, +! {0x26e8, 0x26ff}, +! {0x273d, 0x273d}, +! {0x2757, 0x2757}, +! {0x2776, 0x277f}, +! {0x2b55, 0x2b59}, +! {0x3248, 0x324f}, +! {0xe000, 0xf8ff}, +! {0xfffd, 0xfffd}, +! {0x1f100, 0x1f10a}, +! {0x1f110, 0x1f12d}, +! {0x1f131, 0x1f131}, +! {0x1f13d, 0x1f13d}, +! {0x1f13f, 0x1f13f}, +! {0x1f142, 0x1f142}, +! {0x1f146, 0x1f146}, +! {0x1f14a, 0x1f14e}, +! {0x1f157, 0x1f157}, +! {0x1f15f, 0x1f15f}, +! {0x1f179, 0x1f179}, +! {0x1f17b, 0x1f17c}, +! {0x1f17f, 0x1f17f}, +! {0x1f18a, 0x1f18d}, +! {0x1f190, 0x1f190}, +! {0xf0000, 0xffffd}, +! {0x100000, 0x10fffd} + }; + + if (c >= 0x100) +*************** +*** 1807,1813 **** + return 1; + + /* +! * Check for composing characters. We can handle only the first two, but + * skip all of them (otherwise the cursor would get stuck). + */ + #ifdef FEAT_ARABIC +--- 1936,1942 ---- + return 1; + + /* +! * Check for composing characters. We can handle only the first six, but + * skip all of them (otherwise the cursor would get stuck). + */ + #ifdef FEAT_ARABIC +*************** +*** 1855,1861 **** + return 1; + + /* +! * Check for composing characters. We can handle only the first two, but + * skip all of them (otherwise the cursor would get stuck). + */ + #ifdef FEAT_ARABIC +--- 1984,1990 ---- + return 1; + + /* +! * Check for composing characters. We can handle only the first six, but + * skip all of them (otherwise the cursor would get stuck). + */ + #ifdef FEAT_ARABIC +*************** +*** 1973,2010 **** + utf_iscomposing(c) + int c; + { +! /* sorted list of non-overlapping intervals */ + static struct interval combining[] = + { +! {0x0300, 0x034f}, {0x0360, 0x036f}, {0x0483, 0x0486}, {0x0488, 0x0489}, +! {0x0591, 0x05a1}, {0x05a3, 0x05b9}, {0x05bb, 0x05bd}, {0x05bf, 0x05bf}, +! {0x05c1, 0x05c2}, {0x05c4, 0x05c4}, {0x0610, 0x0615}, {0x064b, 0x0658}, +! {0x0670, 0x0670}, {0x06d6, 0x06dc}, {0x06de, 0x06e4}, {0x06e7, 0x06e8}, +! {0x06ea, 0x06ed}, {0x0711, 0x0711}, {0x0730, 0x074a}, {0x07a6, 0x07b0}, +! {0x0901, 0x0903}, {0x093c, 0x093c}, {0x093e, 0x094d}, {0x0951, 0x0954}, +! {0x0962, 0x0963}, {0x0981, 0x0983}, {0x09bc, 0x09bc}, {0x09be, 0x09c4}, +! {0x09c7, 0x09c8}, {0x09cb, 0x09cd}, {0x09d7, 0x09d7}, {0x09e2, 0x09e3}, +! {0x0a01, 0x0a03}, {0x0a3c, 0x0a3c}, {0x0a3e, 0x0a42}, {0x0a47, 0x0a48}, +! {0x0a4b, 0x0a4d}, {0x0a70, 0x0a71}, {0x0a81, 0x0a83}, {0x0abc, 0x0abc}, +! {0x0abe, 0x0ac5}, {0x0ac7, 0x0ac9}, {0x0acb, 0x0acd}, {0x0ae2, 0x0ae3}, +! {0x0b01, 0x0b03}, {0x0b3c, 0x0b3c}, {0x0b3e, 0x0b43}, {0x0b47, 0x0b48}, +! {0x0b4b, 0x0b4d}, {0x0b56, 0x0b57}, {0x0b82, 0x0b82}, {0x0bbe, 0x0bc2}, +! {0x0bc6, 0x0bc8}, {0x0bca, 0x0bcd}, {0x0bd7, 0x0bd7}, {0x0c01, 0x0c03}, +! {0x0c3e, 0x0c44}, {0x0c46, 0x0c48}, {0x0c4a, 0x0c4d}, {0x0c55, 0x0c56}, +! {0x0c82, 0x0c83}, {0x0cbc, 0x0cbc}, {0x0cbe, 0x0cc4}, {0x0cc6, 0x0cc8}, +! {0x0cca, 0x0ccd}, {0x0cd5, 0x0cd6}, {0x0d02, 0x0d03}, {0x0d3e, 0x0d43}, +! {0x0d46, 0x0d48}, {0x0d4a, 0x0d4d}, {0x0d57, 0x0d57}, {0x0d82, 0x0d83}, +! {0x0dca, 0x0dca}, {0x0dcf, 0x0dd4}, {0x0dd6, 0x0dd6}, {0x0dd8, 0x0ddf}, +! {0x0df2, 0x0df3}, {0x0e31, 0x0e31}, {0x0e34, 0x0e3a}, {0x0e47, 0x0e4e}, +! {0x0eb1, 0x0eb1}, {0x0eb4, 0x0eb9}, {0x0ebb, 0x0ebc}, {0x0ec8, 0x0ecd}, +! {0x0f18, 0x0f19}, {0x0f35, 0x0f35}, {0x0f37, 0x0f37}, {0x0f39, 0x0f39}, +! {0x0f3e, 0x0f3f}, {0x0f71, 0x0f84}, {0x0f86, 0x0f87}, {0x0f90, 0x0f97}, +! {0x0f99, 0x0fbc}, {0x0fc6, 0x0fc6}, {0x102c, 0x1032}, {0x1036, 0x1039}, +! {0x1056, 0x1059}, {0x1712, 0x1714}, {0x1732, 0x1734}, {0x1752, 0x1753}, +! {0x1772, 0x1773}, {0x17b6, 0x17d3}, {0x17dd, 0x17dd}, {0x180b, 0x180d}, +! {0x18a9, 0x18a9}, {0x1920, 0x192b}, {0x1930, 0x193b}, {0x20d0, 0x20ea}, +! {0x302a, 0x302f}, {0x3099, 0x309a}, {0xfb1e, 0xfb1e}, {0xfe00, 0xfe0f}, +! {0xfe20, 0xfe23}, + }; + + return intable(combining, sizeof(combining), c); +--- 2102,2299 ---- + utf_iscomposing(c) + int c; + { +! /* Sorted list of non-overlapping intervals. +! * Generated by ../runtime/tools/unicode.vim. */ + static struct interval combining[] = + { +! {0x0300, 0x036f}, +! {0x0483, 0x0489}, +! {0x0591, 0x05bd}, +! {0x05bf, 0x05bf}, +! {0x05c1, 0x05c2}, +! {0x05c4, 0x05c5}, +! {0x05c7, 0x05c7}, +! {0x0610, 0x061a}, +! {0x064b, 0x065e}, +! {0x0670, 0x0670}, +! {0x06d6, 0x06dc}, +! {0x06de, 0x06e4}, +! {0x06e7, 0x06e8}, +! {0x06ea, 0x06ed}, +! {0x0711, 0x0711}, +! {0x0730, 0x074a}, +! {0x07a6, 0x07b0}, +! {0x07eb, 0x07f3}, +! {0x0816, 0x0819}, +! {0x081b, 0x0823}, +! {0x0825, 0x0827}, +! {0x0829, 0x082d}, +! {0x0900, 0x0903}, +! {0x093c, 0x093c}, +! {0x093e, 0x094e}, +! {0x0951, 0x0955}, +! {0x0962, 0x0963}, +! {0x0981, 0x0983}, +! {0x09bc, 0x09bc}, +! {0x09be, 0x09c4}, +! {0x09c7, 0x09c8}, +! {0x09cb, 0x09cd}, +! {0x09d7, 0x09d7}, +! {0x09e2, 0x09e3}, +! {0x0a01, 0x0a03}, +! {0x0a3c, 0x0a3c}, +! {0x0a3e, 0x0a42}, +! {0x0a47, 0x0a48}, +! {0x0a4b, 0x0a4d}, +! {0x0a51, 0x0a51}, +! {0x0a70, 0x0a71}, +! {0x0a75, 0x0a75}, +! {0x0a81, 0x0a83}, +! {0x0abc, 0x0abc}, +! {0x0abe, 0x0ac5}, +! {0x0ac7, 0x0ac9}, +! {0x0acb, 0x0acd}, +! {0x0ae2, 0x0ae3}, +! {0x0b01, 0x0b03}, +! {0x0b3c, 0x0b3c}, +! {0x0b3e, 0x0b44}, +! {0x0b47, 0x0b48}, +! {0x0b4b, 0x0b4d}, +! {0x0b56, 0x0b57}, +! {0x0b62, 0x0b63}, +! {0x0b82, 0x0b82}, +! {0x0bbe, 0x0bc2}, +! {0x0bc6, 0x0bc8}, +! {0x0bca, 0x0bcd}, +! {0x0bd7, 0x0bd7}, +! {0x0c01, 0x0c03}, +! {0x0c3e, 0x0c44}, +! {0x0c46, 0x0c48}, +! {0x0c4a, 0x0c4d}, +! {0x0c55, 0x0c56}, +! {0x0c62, 0x0c63}, +! {0x0c82, 0x0c83}, +! {0x0cbc, 0x0cbc}, +! {0x0cbe, 0x0cc4}, +! {0x0cc6, 0x0cc8}, +! {0x0cca, 0x0ccd}, +! {0x0cd5, 0x0cd6}, +! {0x0ce2, 0x0ce3}, +! {0x0d02, 0x0d03}, +! {0x0d3e, 0x0d44}, +! {0x0d46, 0x0d48}, +! {0x0d4a, 0x0d4d}, +! {0x0d57, 0x0d57}, +! {0x0d62, 0x0d63}, +! {0x0d82, 0x0d83}, +! {0x0dca, 0x0dca}, +! {0x0dcf, 0x0dd4}, +! {0x0dd6, 0x0dd6}, +! {0x0dd8, 0x0ddf}, +! {0x0df2, 0x0df3}, +! {0x0e31, 0x0e31}, +! {0x0e34, 0x0e3a}, +! {0x0e47, 0x0e4e}, +! {0x0eb1, 0x0eb1}, +! {0x0eb4, 0x0eb9}, +! {0x0ebb, 0x0ebc}, +! {0x0ec8, 0x0ecd}, +! {0x0f18, 0x0f19}, +! {0x0f35, 0x0f35}, +! {0x0f37, 0x0f37}, +! {0x0f39, 0x0f39}, +! {0x0f3e, 0x0f3f}, +! {0x0f71, 0x0f84}, +! {0x0f86, 0x0f87}, +! {0x0f90, 0x0f97}, +! {0x0f99, 0x0fbc}, +! {0x0fc6, 0x0fc6}, +! {0x102b, 0x103e}, +! {0x1056, 0x1059}, +! {0x105e, 0x1060}, +! {0x1062, 0x1064}, +! {0x1067, 0x106d}, +! {0x1071, 0x1074}, +! {0x1082, 0x108d}, +! {0x108f, 0x108f}, +! {0x109a, 0x109d}, +! {0x135f, 0x135f}, +! {0x1712, 0x1714}, +! {0x1732, 0x1734}, +! {0x1752, 0x1753}, +! {0x1772, 0x1773}, +! {0x17b6, 0x17d3}, +! {0x17dd, 0x17dd}, +! {0x180b, 0x180d}, +! {0x18a9, 0x18a9}, +! {0x1920, 0x192b}, +! {0x1930, 0x193b}, +! {0x19b0, 0x19c0}, +! {0x19c8, 0x19c9}, +! {0x1a17, 0x1a1b}, +! {0x1a55, 0x1a5e}, +! {0x1a60, 0x1a7c}, +! {0x1a7f, 0x1a7f}, +! {0x1b00, 0x1b04}, +! {0x1b34, 0x1b44}, +! {0x1b6b, 0x1b73}, +! {0x1b80, 0x1b82}, +! {0x1ba1, 0x1baa}, +! {0x1c24, 0x1c37}, +! {0x1cd0, 0x1cd2}, +! {0x1cd4, 0x1ce8}, +! {0x1ced, 0x1ced}, +! {0x1cf2, 0x1cf2}, +! {0x1dc0, 0x1de6}, +! {0x1dfd, 0x1dff}, +! {0x20d0, 0x20f0}, +! {0x2cef, 0x2cf1}, +! {0x2de0, 0x2dff}, +! {0x302a, 0x302f}, +! {0x3099, 0x309a}, +! {0xa66f, 0xa672}, +! {0xa67c, 0xa67d}, +! {0xa6f0, 0xa6f1}, +! {0xa802, 0xa802}, +! {0xa806, 0xa806}, +! {0xa80b, 0xa80b}, +! {0xa823, 0xa827}, +! {0xa880, 0xa881}, +! {0xa8b4, 0xa8c4}, +! {0xa8e0, 0xa8f1}, +! {0xa926, 0xa92d}, +! {0xa947, 0xa953}, +! {0xa980, 0xa983}, +! {0xa9b3, 0xa9c0}, +! {0xaa29, 0xaa36}, +! {0xaa43, 0xaa43}, +! {0xaa4c, 0xaa4d}, +! {0xaa7b, 0xaa7b}, +! {0xaab0, 0xaab0}, +! {0xaab2, 0xaab4}, +! {0xaab7, 0xaab8}, +! {0xaabe, 0xaabf}, +! {0xaac1, 0xaac1}, +! {0xabe3, 0xabea}, +! {0xabec, 0xabed}, +! {0xfb1e, 0xfb1e}, +! {0xfe00, 0xfe0f}, +! {0xfe20, 0xfe26}, +! {0x101fd, 0x101fd}, +! {0x10a01, 0x10a03}, +! {0x10a05, 0x10a06}, +! {0x10a0c, 0x10a0f}, +! {0x10a38, 0x10a3a}, +! {0x10a3f, 0x10a3f}, +! {0x11080, 0x11082}, +! {0x110b0, 0x110ba}, +! {0x1d165, 0x1d169}, +! {0x1d16d, 0x1d172}, +! {0x1d17b, 0x1d182}, +! {0x1d185, 0x1d18b}, +! {0x1d1aa, 0x1d1ad}, +! {0x1d242, 0x1d244}, +! {0xe0100, 0xe01ef} + }; + + return intable(combining, sizeof(combining), c); +*************** +*** 2152,2166 **** + * Code for Unicode case-dependent operations. Based on notes in + * http://www.unicode.org/Public/UNIDATA/CaseFolding.txt + * This code uses simple case folding, not full case folding. + */ + + /* +! * The following table is built by foldExtract.pl < CaseFolding.txt . +! * It must be in numeric order, because we use binary search on it. +! * An entry such as {0x41,0x5a,1,32} means that UCS-4 characters in the range +! * from 0x41 to 0x5a inclusive, stepping by 1, are folded by adding 32. + */ +- + typedef struct + { + int rangeStart; +--- 2441,2456 ---- + * Code for Unicode case-dependent operations. Based on notes in + * http://www.unicode.org/Public/UNIDATA/CaseFolding.txt + * This code uses simple case folding, not full case folding. ++ * Last updated for Unicode 5.2. + */ + + /* +! * The following tables are built by ../runtime/tools/unicode.vim. +! * They must be in numeric order, because we use binary search. +! * An entry such as {0x41,0x5a,1,32} means that Unicode characters in the +! * range from 0x41 to 0x5a inclusive, stepping by 1, are changed to +! * folded/upper/lower by adding 32. + */ + typedef struct + { + int rangeStart; +*************** +*** 2171,2211 **** + + static convertStruct foldCase[] = + { +! {0x41,0x5a,1,32}, {0xc0,0xd6,1,32}, {0xd8,0xde,1,32}, +! {0x100,0x12e,2,1}, {0x130,0x130,-1,-199}, {0x132,0x136,2,1}, +! {0x139,0x147,2,1}, {0x14a,0x176,2,1}, {0x178,0x178,-1,-121}, +! {0x179,0x17d,2,1}, {0x181,0x181,-1,210}, {0x182,0x184,2,1}, +! {0x186,0x186,-1,206}, {0x187,0x187,-1,1}, {0x189,0x18a,1,205}, +! {0x18b,0x18b,-1,1}, {0x18e,0x18e,-1,79}, {0x18f,0x18f,-1,202}, +! {0x190,0x190,-1,203}, {0x191,0x191,-1,1}, {0x193,0x193,-1,205}, +! {0x194,0x194,-1,207}, {0x196,0x196,-1,211}, {0x197,0x197,-1,209}, +! {0x198,0x198,-1,1}, {0x19c,0x19c,-1,211}, {0x19d,0x19d,-1,213}, +! {0x19f,0x19f,-1,214}, {0x1a0,0x1a4,2,1}, {0x1a6,0x1a6,-1,218}, +! {0x1a7,0x1a7,-1,1}, {0x1a9,0x1a9,-1,218}, {0x1ac,0x1ac,-1,1}, +! {0x1ae,0x1ae,-1,218}, {0x1af,0x1af,-1,1}, {0x1b1,0x1b2,1,217}, +! {0x1b3,0x1b5,2,1}, {0x1b7,0x1b7,-1,219}, {0x1b8,0x1bc,4,1}, +! {0x1c4,0x1c4,-1,2}, {0x1c5,0x1c5,-1,1}, {0x1c7,0x1c7,-1,2}, +! {0x1c8,0x1c8,-1,1}, {0x1ca,0x1ca,-1,2}, {0x1cb,0x1db,2,1}, +! {0x1de,0x1ee,2,1}, {0x1f1,0x1f1,-1,2}, {0x1f2,0x1f4,2,1}, +! {0x1f6,0x1f6,-1,-97}, {0x1f7,0x1f7,-1,-56}, {0x1f8,0x21e,2,1}, +! {0x220,0x220,-1,-130}, {0x222,0x232,2,1}, {0x386,0x386,-1,38}, +! {0x388,0x38a,1,37}, {0x38c,0x38c,-1,64}, {0x38e,0x38f,1,63}, +! {0x391,0x3a1,1,32}, {0x3a3,0x3ab,1,32}, {0x3d8,0x3ee,2,1}, +! {0x3f4,0x3f4,-1,-60}, {0x3f7,0x3f7,-1,1}, {0x3f9,0x3f9,-1,-7}, +! {0x3fa,0x3fa,-1,1}, {0x400,0x40f,1,80}, {0x410,0x42f,1,32}, +! {0x460,0x480,2,1}, {0x48a,0x4be,2,1}, {0x4c1,0x4cd,2,1}, +! {0x4d0,0x4f4,2,1}, {0x4f8,0x500,8,1}, {0x502,0x50e,2,1}, +! {0x531,0x556,1,48}, {0x1e00,0x1e94,2,1}, {0x1ea0,0x1ef8,2,1}, +! {0x1f08,0x1f0f,1,-8}, {0x1f18,0x1f1d,1,-8}, {0x1f28,0x1f2f,1,-8}, +! {0x1f38,0x1f3f,1,-8}, {0x1f48,0x1f4d,1,-8}, {0x1f59,0x1f5f,2,-8}, +! {0x1f68,0x1f6f,1,-8}, {0x1f88,0x1f8f,1,-8}, {0x1f98,0x1f9f,1,-8}, +! {0x1fa8,0x1faf,1,-8}, {0x1fb8,0x1fb9,1,-8}, {0x1fba,0x1fbb,1,-74}, +! {0x1fbc,0x1fbc,-1,-9}, {0x1fc8,0x1fcb,1,-86}, {0x1fcc,0x1fcc,-1,-9}, +! {0x1fd8,0x1fd9,1,-8}, {0x1fda,0x1fdb,1,-100}, {0x1fe8,0x1fe9,1,-8}, +! {0x1fea,0x1feb,1,-112}, {0x1fec,0x1fec,-1,-7}, {0x1ff8,0x1ff9,1,-128}, +! {0x1ffa,0x1ffb,1,-126}, {0x1ffc,0x1ffc,-1,-9}, {0x2126,0x2126,-1,-7517}, +! {0x212a,0x212a,-1,-8383}, {0x212b,0x212b,-1,-8262}, +! {0x2160,0x216f,1,16}, {0x24b6,0x24cf,1,26}, {0xff21,0xff3a,1,32}, + {0x10400,0x10427,1,40} + }; + +--- 2461,2621 ---- + + static convertStruct foldCase[] = + { +! {0x41,0x5a,1,32}, +! {0xb5,0xb5,-1,775}, +! {0xc0,0xd6,1,32}, +! {0xd8,0xde,1,32}, +! {0x100,0x12e,2,1}, +! {0x132,0x136,2,1}, +! {0x139,0x147,2,1}, +! {0x14a,0x176,2,1}, +! {0x178,0x178,-1,-121}, +! {0x179,0x17d,2,1}, +! {0x17f,0x17f,-1,-268}, +! {0x181,0x181,-1,210}, +! {0x182,0x184,2,1}, +! {0x186,0x186,-1,206}, +! {0x187,0x187,-1,1}, +! {0x189,0x18a,1,205}, +! {0x18b,0x18b,-1,1}, +! {0x18e,0x18e,-1,79}, +! {0x18f,0x18f,-1,202}, +! {0x190,0x190,-1,203}, +! {0x191,0x191,-1,1}, +! {0x193,0x193,-1,205}, +! {0x194,0x194,-1,207}, +! {0x196,0x196,-1,211}, +! {0x197,0x197,-1,209}, +! {0x198,0x198,-1,1}, +! {0x19c,0x19c,-1,211}, +! {0x19d,0x19d,-1,213}, +! {0x19f,0x19f,-1,214}, +! {0x1a0,0x1a4,2,1}, +! {0x1a6,0x1a6,-1,218}, +! {0x1a7,0x1a7,-1,1}, +! {0x1a9,0x1a9,-1,218}, +! {0x1ac,0x1ac,-1,1}, +! {0x1ae,0x1ae,-1,218}, +! {0x1af,0x1af,-1,1}, +! {0x1b1,0x1b2,1,217}, +! {0x1b3,0x1b5,2,1}, +! {0x1b7,0x1b7,-1,219}, +! {0x1b8,0x1bc,4,1}, +! {0x1c4,0x1c4,-1,2}, +! {0x1c5,0x1c5,-1,1}, +! {0x1c7,0x1c7,-1,2}, +! {0x1c8,0x1c8,-1,1}, +! {0x1ca,0x1ca,-1,2}, +! {0x1cb,0x1db,2,1}, +! {0x1de,0x1ee,2,1}, +! {0x1f1,0x1f1,-1,2}, +! {0x1f2,0x1f4,2,1}, +! {0x1f6,0x1f6,-1,-97}, +! {0x1f7,0x1f7,-1,-56}, +! {0x1f8,0x21e,2,1}, +! {0x220,0x220,-1,-130}, +! {0x222,0x232,2,1}, +! {0x23a,0x23a,-1,10795}, +! {0x23b,0x23b,-1,1}, +! {0x23d,0x23d,-1,-163}, +! {0x23e,0x23e,-1,10792}, +! {0x241,0x241,-1,1}, +! {0x243,0x243,-1,-195}, +! {0x244,0x244,-1,69}, +! {0x245,0x245,-1,71}, +! {0x246,0x24e,2,1}, +! {0x345,0x345,-1,116}, +! {0x370,0x372,2,1}, +! {0x376,0x376,-1,1}, +! {0x386,0x386,-1,38}, +! {0x388,0x38a,1,37}, +! {0x38c,0x38c,-1,64}, +! {0x38e,0x38f,1,63}, +! {0x391,0x3a1,1,32}, +! {0x3a3,0x3ab,1,32}, +! {0x3c2,0x3c2,-1,1}, +! {0x3cf,0x3cf,-1,8}, +! {0x3d0,0x3d0,-1,-30}, +! {0x3d1,0x3d1,-1,-25}, +! {0x3d5,0x3d5,-1,-15}, +! {0x3d6,0x3d6,-1,-22}, +! {0x3d8,0x3ee,2,1}, +! {0x3f0,0x3f0,-1,-54}, +! {0x3f1,0x3f1,-1,-48}, +! {0x3f4,0x3f4,-1,-60}, +! {0x3f5,0x3f5,-1,-64}, +! {0x3f7,0x3f7,-1,1}, +! {0x3f9,0x3f9,-1,-7}, +! {0x3fa,0x3fa,-1,1}, +! {0x3fd,0x3ff,1,-130}, +! {0x400,0x40f,1,80}, +! {0x410,0x42f,1,32}, +! {0x460,0x480,2,1}, +! {0x48a,0x4be,2,1}, +! {0x4c0,0x4c0,-1,15}, +! {0x4c1,0x4cd,2,1}, +! {0x4d0,0x524,2,1}, +! {0x531,0x556,1,48}, +! {0x10a0,0x10c5,1,7264}, +! {0x1e00,0x1e94,2,1}, +! {0x1e9b,0x1e9b,-1,-58}, +! {0x1e9e,0x1e9e,-1,-7615}, +! {0x1ea0,0x1efe,2,1}, +! {0x1f08,0x1f0f,1,-8}, +! {0x1f18,0x1f1d,1,-8}, +! {0x1f28,0x1f2f,1,-8}, +! {0x1f38,0x1f3f,1,-8}, +! {0x1f48,0x1f4d,1,-8}, +! {0x1f59,0x1f5f,2,-8}, +! {0x1f68,0x1f6f,1,-8}, +! {0x1f88,0x1f8f,1,-8}, +! {0x1f98,0x1f9f,1,-8}, +! {0x1fa8,0x1faf,1,-8}, +! {0x1fb8,0x1fb9,1,-8}, +! {0x1fba,0x1fbb,1,-74}, +! {0x1fbc,0x1fbc,-1,-9}, +! {0x1fbe,0x1fbe,-1,-7173}, +! {0x1fc8,0x1fcb,1,-86}, +! {0x1fcc,0x1fcc,-1,-9}, +! {0x1fd8,0x1fd9,1,-8}, +! {0x1fda,0x1fdb,1,-100}, +! {0x1fe8,0x1fe9,1,-8}, +! {0x1fea,0x1feb,1,-112}, +! {0x1fec,0x1fec,-1,-7}, +! {0x1ff8,0x1ff9,1,-128}, +! {0x1ffa,0x1ffb,1,-126}, +! {0x1ffc,0x1ffc,-1,-9}, +! {0x2126,0x2126,-1,-7517}, +! {0x212a,0x212a,-1,-8383}, +! {0x212b,0x212b,-1,-8262}, +! {0x2132,0x2132,-1,28}, +! {0x2160,0x216f,1,16}, +! {0x2183,0x2183,-1,1}, +! {0x24b6,0x24cf,1,26}, +! {0x2c00,0x2c2e,1,48}, +! {0x2c60,0x2c60,-1,1}, +! {0x2c62,0x2c62,-1,-10743}, +! {0x2c63,0x2c63,-1,-3814}, +! {0x2c64,0x2c64,-1,-10727}, +! {0x2c67,0x2c6b,2,1}, +! {0x2c6d,0x2c6d,-1,-10780}, +! {0x2c6e,0x2c6e,-1,-10749}, +! {0x2c6f,0x2c6f,-1,-10783}, +! {0x2c70,0x2c70,-1,-10782}, +! {0x2c72,0x2c75,3,1}, +! {0x2c7e,0x2c7f,1,-10815}, +! {0x2c80,0x2ce2,2,1}, +! {0x2ceb,0x2ced,2,1}, +! {0xa640,0xa65e,2,1}, +! {0xa662,0xa66c,2,1}, +! {0xa680,0xa696,2,1}, +! {0xa722,0xa72e,2,1}, +! {0xa732,0xa76e,2,1}, +! {0xa779,0xa77b,2,1}, +! {0xa77d,0xa77d,-1,-35332}, +! {0xa77e,0xa786,2,1}, +! {0xa78b,0xa78b,-1,1}, +! {0xff21,0xff3a,1,32}, + {0x10400,0x10427,1,40} + }; + +*************** +*** 2253,2337 **** + return utf_convert(a, foldCase, sizeof(foldCase)); + } + +- /* +- * The following tables are built by upperLowerExtract.pl < UnicodeData.txt . +- * They must be in numeric order, because we use binary search on them. +- * An entry such as {0x41,0x5a,1,32} means that UCS-4 characters in the range +- * from 0x41 to 0x5a inclusive, stepping by 1, are switched to lower (for +- * example) by adding 32. +- */ + static convertStruct toLower[] = + { +! {0x41,0x5a,1,32}, {0xc0,0xd6,1,32}, {0xd8,0xde,1,32}, +! {0x100,0x12e,2,1}, {0x130,0x130,-1,-199}, {0x132,0x136,2,1}, +! {0x139,0x147,2,1}, {0x14a,0x176,2,1}, {0x178,0x178,-1,-121}, +! {0x179,0x17d,2,1}, {0x181,0x181,-1,210}, {0x182,0x184,2,1}, +! {0x186,0x186,-1,206}, {0x187,0x187,-1,1}, {0x189,0x18a,1,205}, +! {0x18b,0x18b,-1,1}, {0x18e,0x18e,-1,79}, {0x18f,0x18f,-1,202}, +! {0x190,0x190,-1,203}, {0x191,0x191,-1,1}, {0x193,0x193,-1,205}, +! {0x194,0x194,-1,207}, {0x196,0x196,-1,211}, {0x197,0x197,-1,209}, +! {0x198,0x198,-1,1}, {0x19c,0x19c,-1,211}, {0x19d,0x19d,-1,213}, +! {0x19f,0x19f,-1,214}, {0x1a0,0x1a4,2,1}, {0x1a6,0x1a6,-1,218}, +! {0x1a7,0x1a7,-1,1}, {0x1a9,0x1a9,-1,218}, {0x1ac,0x1ac,-1,1}, +! {0x1ae,0x1ae,-1,218}, {0x1af,0x1af,-1,1}, {0x1b1,0x1b2,1,217}, +! {0x1b3,0x1b5,2,1}, {0x1b7,0x1b7,-1,219}, {0x1b8,0x1bc,4,1}, +! {0x1c4,0x1ca,3,2}, {0x1cd,0x1db,2,1}, {0x1de,0x1ee,2,1}, +! {0x1f1,0x1f1,-1,2}, {0x1f4,0x1f4,-1,1}, {0x1f6,0x1f6,-1,-97}, +! {0x1f7,0x1f7,-1,-56}, {0x1f8,0x21e,2,1}, {0x220,0x220,-1,-130}, +! {0x222,0x232,2,1}, {0x386,0x386,-1,38}, {0x388,0x38a,1,37}, +! {0x38c,0x38c,-1,64}, {0x38e,0x38f,1,63}, {0x391,0x3a1,1,32}, +! {0x3a3,0x3ab,1,32}, {0x3d8,0x3ee,2,1}, {0x3f4,0x3f4,-1,-60}, +! {0x3f7,0x3f7,-1,1}, {0x3f9,0x3f9,-1,-7}, {0x3fa,0x3fa,-1,1}, +! {0x400,0x40f,1,80}, {0x410,0x42f,1,32}, {0x460,0x480,2,1}, +! {0x48a,0x4be,2,1}, {0x4c1,0x4cd,2,1}, {0x4d0,0x4f4,2,1}, +! {0x4f8,0x500,8,1}, {0x502,0x50e,2,1}, {0x531,0x556,1,48}, +! {0x1e00,0x1e94,2,1}, {0x1ea0,0x1ef8,2,1}, {0x1f08,0x1f0f,1,-8}, +! {0x1f18,0x1f1d,1,-8}, {0x1f28,0x1f2f,1,-8}, {0x1f38,0x1f3f,1,-8}, +! {0x1f48,0x1f4d,1,-8}, {0x1f59,0x1f5f,2,-8}, {0x1f68,0x1f6f,1,-8}, +! {0x1fb8,0x1fb9,1,-8}, {0x1fba,0x1fbb,1,-74}, {0x1fc8,0x1fcb,1,-86}, +! {0x1fd8,0x1fd9,1,-8}, {0x1fda,0x1fdb,1,-100}, {0x1fe8,0x1fe9,1,-8}, +! {0x1fea,0x1feb,1,-112}, {0x1fec,0x1fec,-1,-7}, {0x1ff8,0x1ff9,1,-128}, +! {0x1ffa,0x1ffb,1,-126}, {0x2126,0x2126,-1,-7517}, {0x212a,0x212a,-1,-8383}, +! {0x212b,0x212b,-1,-8262}, {0xff21,0xff3a,1,32}, {0x10400,0x10427,1,40} + }; + + static convertStruct toUpper[] = + { +! {0x61,0x7a,1,-32}, {0xb5,0xb5,-1,743}, {0xe0,0xf6,1,-32}, +! {0xf8,0xfe,1,-32}, {0xff,0xff,-1,121}, {0x101,0x12f,2,-1}, +! {0x131,0x131,-1,-232}, {0x133,0x137,2,-1}, {0x13a,0x148,2,-1}, +! {0x14b,0x177,2,-1}, {0x17a,0x17e,2,-1}, {0x17f,0x17f,-1,-300}, +! {0x183,0x185,2,-1}, {0x188,0x18c,4,-1}, {0x192,0x192,-1,-1}, +! {0x195,0x195,-1,97}, {0x199,0x199,-1,-1}, {0x19e,0x19e,-1,130}, +! {0x1a1,0x1a5,2,-1}, {0x1a8,0x1ad,5,-1}, {0x1b0,0x1b4,4,-1}, +! {0x1b6,0x1b9,3,-1}, {0x1bd,0x1bd,-1,-1}, {0x1bf,0x1bf,-1,56}, +! {0x1c5,0x1c6,1,-1}, {0x1c8,0x1c9,1,-1}, {0x1cb,0x1cc,1,-1}, +! {0x1ce,0x1dc,2,-1}, {0x1dd,0x1dd,-1,-79}, {0x1df,0x1ef,2,-1}, +! {0x1f2,0x1f3,1,-1}, {0x1f5,0x1f9,4,-1}, {0x1fb,0x21f,2,-1}, +! {0x223,0x233,2,-1}, {0x253,0x253,-1,-210}, {0x254,0x254,-1,-206}, +! {0x256,0x257,1,-205}, {0x259,0x259,-1,-202}, {0x25b,0x25b,-1,-203}, +! {0x260,0x260,-1,-205}, {0x263,0x263,-1,-207}, {0x268,0x268,-1,-209}, +! {0x269,0x26f,6,-211}, {0x272,0x272,-1,-213}, {0x275,0x275,-1,-214}, +! {0x280,0x283,3,-218}, {0x288,0x288,-1,-218}, {0x28a,0x28b,1,-217}, +! {0x292,0x292,-1,-219}, {0x3ac,0x3ac,-1,-38}, {0x3ad,0x3af,1,-37}, +! {0x3b1,0x3c1,1,-32}, {0x3c2,0x3c2,-1,-31}, {0x3c3,0x3cb,1,-32}, +! {0x3cc,0x3cc,-1,-64}, {0x3cd,0x3ce,1,-63}, {0x3d0,0x3d0,-1,-62}, +! {0x3d1,0x3d1,-1,-57}, {0x3d5,0x3d5,-1,-47}, {0x3d6,0x3d6,-1,-54}, +! {0x3d9,0x3ef,2,-1}, {0x3f0,0x3f0,-1,-86}, {0x3f1,0x3f1,-1,-80}, +! {0x3f2,0x3f2,-1,7}, {0x3f5,0x3f5,-1,-96}, {0x3f8,0x3fb,3,-1}, +! {0x430,0x44f,1,-32}, {0x450,0x45f,1,-80}, {0x461,0x481,2,-1}, +! {0x48b,0x4bf,2,-1}, {0x4c2,0x4ce,2,-1}, {0x4d1,0x4f5,2,-1}, +! {0x4f9,0x501,8,-1}, {0x503,0x50f,2,-1}, {0x561,0x586,1,-48}, +! {0x1e01,0x1e95,2,-1}, {0x1e9b,0x1e9b,-1,-59}, {0x1ea1,0x1ef9,2,-1}, +! {0x1f00,0x1f07,1,8}, {0x1f10,0x1f15,1,8}, {0x1f20,0x1f27,1,8}, +! {0x1f30,0x1f37,1,8}, {0x1f40,0x1f45,1,8}, {0x1f51,0x1f57,2,8}, +! {0x1f60,0x1f67,1,8}, {0x1f70,0x1f71,1,74}, {0x1f72,0x1f75,1,86}, +! {0x1f76,0x1f77,1,100}, {0x1f78,0x1f79,1,128}, {0x1f7a,0x1f7b,1,112}, +! {0x1f7c,0x1f7d,1,126}, {0x1f80,0x1f87,1,8}, {0x1f90,0x1f97,1,8}, +! {0x1fa0,0x1fa7,1,8}, {0x1fb0,0x1fb1,1,8}, {0x1fb3,0x1fb3,-1,9}, +! {0x1fbe,0x1fbe,-1,-7205}, {0x1fc3,0x1fc3,-1,9}, {0x1fd0,0x1fd1,1,8}, +! {0x1fe0,0x1fe1,1,8}, {0x1fe5,0x1fe5,-1,7}, {0x1ff3,0x1ff3,-1,9}, +! {0xff41,0xff5a,1,-32}, {0x10428,0x1044f,1,-40} + }; + + /* +--- 2663,2968 ---- + return utf_convert(a, foldCase, sizeof(foldCase)); + } + + static convertStruct toLower[] = + { +! {0x41,0x5a,1,32}, +! {0xc0,0xd6,1,32}, +! {0xd8,0xde,1,32}, +! {0x100,0x12e,2,1}, +! {0x130,0x130,-1,-199}, +! {0x132,0x136,2,1}, +! {0x139,0x147,2,1}, +! {0x14a,0x176,2,1}, +! {0x178,0x178,-1,-121}, +! {0x179,0x17d,2,1}, +! {0x181,0x181,-1,210}, +! {0x182,0x184,2,1}, +! {0x186,0x186,-1,206}, +! {0x187,0x187,-1,1}, +! {0x189,0x18a,1,205}, +! {0x18b,0x18b,-1,1}, +! {0x18e,0x18e,-1,79}, +! {0x18f,0x18f,-1,202}, +! {0x190,0x190,-1,203}, +! {0x191,0x191,-1,1}, +! {0x193,0x193,-1,205}, +! {0x194,0x194,-1,207}, +! {0x196,0x196,-1,211}, +! {0x197,0x197,-1,209}, +! {0x198,0x198,-1,1}, +! {0x19c,0x19c,-1,211}, +! {0x19d,0x19d,-1,213}, +! {0x19f,0x19f,-1,214}, +! {0x1a0,0x1a4,2,1}, +! {0x1a6,0x1a6,-1,218}, +! {0x1a7,0x1a7,-1,1}, +! {0x1a9,0x1a9,-1,218}, +! {0x1ac,0x1ac,-1,1}, +! {0x1ae,0x1ae,-1,218}, +! {0x1af,0x1af,-1,1}, +! {0x1b1,0x1b2,1,217}, +! {0x1b3,0x1b5,2,1}, +! {0x1b7,0x1b7,-1,219}, +! {0x1b8,0x1bc,4,1}, +! {0x1c4,0x1c4,-1,2}, +! {0x1c5,0x1c5,-1,1}, +! {0x1c7,0x1c7,-1,2}, +! {0x1c8,0x1c8,-1,1}, +! {0x1ca,0x1ca,-1,2}, +! {0x1cb,0x1db,2,1}, +! {0x1de,0x1ee,2,1}, +! {0x1f1,0x1f1,-1,2}, +! {0x1f2,0x1f4,2,1}, +! {0x1f6,0x1f6,-1,-97}, +! {0x1f7,0x1f7,-1,-56}, +! {0x1f8,0x21e,2,1}, +! {0x220,0x220,-1,-130}, +! {0x222,0x232,2,1}, +! {0x23a,0x23a,-1,10795}, +! {0x23b,0x23b,-1,1}, +! {0x23d,0x23d,-1,-163}, +! {0x23e,0x23e,-1,10792}, +! {0x241,0x241,-1,1}, +! {0x243,0x243,-1,-195}, +! {0x244,0x244,-1,69}, +! {0x245,0x245,-1,71}, +! {0x246,0x24e,2,1}, +! {0x370,0x372,2,1}, +! {0x376,0x376,-1,1}, +! {0x386,0x386,-1,38}, +! {0x388,0x38a,1,37}, +! {0x38c,0x38c,-1,64}, +! {0x38e,0x38f,1,63}, +! {0x391,0x3a1,1,32}, +! {0x3a3,0x3ab,1,32}, +! {0x3cf,0x3cf,-1,8}, +! {0x3d8,0x3ee,2,1}, +! {0x3f4,0x3f4,-1,-60}, +! {0x3f7,0x3f7,-1,1}, +! {0x3f9,0x3f9,-1,-7}, +! {0x3fa,0x3fa,-1,1}, +! {0x3fd,0x3ff,1,-130}, +! {0x400,0x40f,1,80}, +! {0x410,0x42f,1,32}, +! {0x460,0x480,2,1}, +! {0x48a,0x4be,2,1}, +! {0x4c0,0x4c0,-1,15}, +! {0x4c1,0x4cd,2,1}, +! {0x4d0,0x524,2,1}, +! {0x531,0x556,1,48}, +! {0x10a0,0x10c5,1,7264}, +! {0x1e00,0x1e94,2,1}, +! {0x1e9e,0x1e9e,-1,-7615}, +! {0x1ea0,0x1efe,2,1}, +! {0x1f08,0x1f0f,1,-8}, +! {0x1f18,0x1f1d,1,-8}, +! {0x1f28,0x1f2f,1,-8}, +! {0x1f38,0x1f3f,1,-8}, +! {0x1f48,0x1f4d,1,-8}, +! {0x1f59,0x1f5f,2,-8}, +! {0x1f68,0x1f6f,1,-8}, +! {0x1f88,0x1f8f,1,-8}, +! {0x1f98,0x1f9f,1,-8}, +! {0x1fa8,0x1faf,1,-8}, +! {0x1fb8,0x1fb9,1,-8}, +! {0x1fba,0x1fbb,1,-74}, +! {0x1fbc,0x1fbc,-1,-9}, +! {0x1fc8,0x1fcb,1,-86}, +! {0x1fcc,0x1fcc,-1,-9}, +! {0x1fd8,0x1fd9,1,-8}, +! {0x1fda,0x1fdb,1,-100}, +! {0x1fe8,0x1fe9,1,-8}, +! {0x1fea,0x1feb,1,-112}, +! {0x1fec,0x1fec,-1,-7}, +! {0x1ff8,0x1ff9,1,-128}, +! {0x1ffa,0x1ffb,1,-126}, +! {0x1ffc,0x1ffc,-1,-9}, +! {0x2126,0x2126,-1,-7517}, +! {0x212a,0x212a,-1,-8383}, +! {0x212b,0x212b,-1,-8262}, +! {0x2132,0x2132,-1,28}, +! {0x2160,0x216f,1,16}, +! {0x2183,0x2183,-1,1}, +! {0x24b6,0x24cf,1,26}, +! {0x2c00,0x2c2e,1,48}, +! {0x2c60,0x2c60,-1,1}, +! {0x2c62,0x2c62,-1,-10743}, +! {0x2c63,0x2c63,-1,-3814}, +! {0x2c64,0x2c64,-1,-10727}, +! {0x2c67,0x2c6b,2,1}, +! {0x2c6d,0x2c6d,-1,-10780}, +! {0x2c6e,0x2c6e,-1,-10749}, +! {0x2c6f,0x2c6f,-1,-10783}, +! {0x2c70,0x2c70,-1,-10782}, +! {0x2c72,0x2c75,3,1}, +! {0x2c7e,0x2c7f,1,-10815}, +! {0x2c80,0x2ce2,2,1}, +! {0x2ceb,0x2ced,2,1}, +! {0xa640,0xa65e,2,1}, +! {0xa662,0xa66c,2,1}, +! {0xa680,0xa696,2,1}, +! {0xa722,0xa72e,2,1}, +! {0xa732,0xa76e,2,1}, +! {0xa779,0xa77b,2,1}, +! {0xa77d,0xa77d,-1,-35332}, +! {0xa77e,0xa786,2,1}, +! {0xa78b,0xa78b,-1,1}, +! {0xff21,0xff3a,1,32}, +! {0x10400,0x10427,1,40} + }; + + static convertStruct toUpper[] = + { +! {0x61,0x7a,1,-32}, +! {0xb5,0xb5,-1,743}, +! {0xe0,0xf6,1,-32}, +! {0xf8,0xfe,1,-32}, +! {0xff,0xff,-1,121}, +! {0x101,0x12f,2,-1}, +! {0x131,0x131,-1,-232}, +! {0x133,0x137,2,-1}, +! {0x13a,0x148,2,-1}, +! {0x14b,0x177,2,-1}, +! {0x17a,0x17e,2,-1}, +! {0x17f,0x17f,-1,-300}, +! {0x180,0x180,-1,195}, +! {0x183,0x185,2,-1}, +! {0x188,0x18c,4,-1}, +! {0x192,0x192,-1,-1}, +! {0x195,0x195,-1,97}, +! {0x199,0x199,-1,-1}, +! {0x19a,0x19a,-1,163}, +! {0x19e,0x19e,-1,130}, +! {0x1a1,0x1a5,2,-1}, +! {0x1a8,0x1ad,5,-1}, +! {0x1b0,0x1b4,4,-1}, +! {0x1b6,0x1b9,3,-1}, +! {0x1bd,0x1bd,-1,-1}, +! {0x1bf,0x1bf,-1,56}, +! {0x1c5,0x1c5,-1,-1}, +! {0x1c6,0x1c6,-1,-2}, +! {0x1c8,0x1c8,-1,-1}, +! {0x1c9,0x1c9,-1,-2}, +! {0x1cb,0x1cb,-1,-1}, +! {0x1cc,0x1cc,-1,-2}, +! {0x1ce,0x1dc,2,-1}, +! {0x1dd,0x1dd,-1,-79}, +! {0x1df,0x1ef,2,-1}, +! {0x1f2,0x1f2,-1,-1}, +! {0x1f3,0x1f3,-1,-2}, +! {0x1f5,0x1f9,4,-1}, +! {0x1fb,0x21f,2,-1}, +! {0x223,0x233,2,-1}, +! {0x23c,0x23c,-1,-1}, +! {0x23f,0x240,1,10815}, +! {0x242,0x247,5,-1}, +! {0x249,0x24f,2,-1}, +! {0x250,0x250,-1,10783}, +! {0x251,0x251,-1,10780}, +! {0x252,0x252,-1,10782}, +! {0x253,0x253,-1,-210}, +! {0x254,0x254,-1,-206}, +! {0x256,0x257,1,-205}, +! {0x259,0x259,-1,-202}, +! {0x25b,0x25b,-1,-203}, +! {0x260,0x260,-1,-205}, +! {0x263,0x263,-1,-207}, +! {0x268,0x268,-1,-209}, +! {0x269,0x269,-1,-211}, +! {0x26b,0x26b,-1,10743}, +! {0x26f,0x26f,-1,-211}, +! {0x271,0x271,-1,10749}, +! {0x272,0x272,-1,-213}, +! {0x275,0x275,-1,-214}, +! {0x27d,0x27d,-1,10727}, +! {0x280,0x283,3,-218}, +! {0x288,0x288,-1,-218}, +! {0x289,0x289,-1,-69}, +! {0x28a,0x28b,1,-217}, +! {0x28c,0x28c,-1,-71}, +! {0x292,0x292,-1,-219}, +! {0x345,0x345,-1,84}, +! {0x371,0x373,2,-1}, +! {0x377,0x377,-1,-1}, +! {0x37b,0x37d,1,130}, +! {0x3ac,0x3ac,-1,-38}, +! {0x3ad,0x3af,1,-37}, +! {0x3b1,0x3c1,1,-32}, +! {0x3c2,0x3c2,-1,-31}, +! {0x3c3,0x3cb,1,-32}, +! {0x3cc,0x3cc,-1,-64}, +! {0x3cd,0x3ce,1,-63}, +! {0x3d0,0x3d0,-1,-62}, +! {0x3d1,0x3d1,-1,-57}, +! {0x3d5,0x3d5,-1,-47}, +! {0x3d6,0x3d6,-1,-54}, +! {0x3d7,0x3d7,-1,-8}, +! {0x3d9,0x3ef,2,-1}, +! {0x3f0,0x3f0,-1,-86}, +! {0x3f1,0x3f1,-1,-80}, +! {0x3f2,0x3f2,-1,7}, +! {0x3f5,0x3f5,-1,-96}, +! {0x3f8,0x3fb,3,-1}, +! {0x430,0x44f,1,-32}, +! {0x450,0x45f,1,-80}, +! {0x461,0x481,2,-1}, +! {0x48b,0x4bf,2,-1}, +! {0x4c2,0x4ce,2,-1}, +! {0x4cf,0x4cf,-1,-15}, +! {0x4d1,0x525,2,-1}, +! {0x561,0x586,1,-48}, +! {0x1d79,0x1d79,-1,35332}, +! {0x1d7d,0x1d7d,-1,3814}, +! {0x1e01,0x1e95,2,-1}, +! {0x1e9b,0x1e9b,-1,-59}, +! {0x1ea1,0x1eff,2,-1}, +! {0x1f00,0x1f07,1,8}, +! {0x1f10,0x1f15,1,8}, +! {0x1f20,0x1f27,1,8}, +! {0x1f30,0x1f37,1,8}, +! {0x1f40,0x1f45,1,8}, +! {0x1f51,0x1f57,2,8}, +! {0x1f60,0x1f67,1,8}, +! {0x1f70,0x1f71,1,74}, +! {0x1f72,0x1f75,1,86}, +! {0x1f76,0x1f77,1,100}, +! {0x1f78,0x1f79,1,128}, +! {0x1f7a,0x1f7b,1,112}, +! {0x1f7c,0x1f7d,1,126}, +! {0x1f80,0x1f87,1,8}, +! {0x1f90,0x1f97,1,8}, +! {0x1fa0,0x1fa7,1,8}, +! {0x1fb0,0x1fb1,1,8}, +! {0x1fb3,0x1fb3,-1,9}, +! {0x1fbe,0x1fbe,-1,-7205}, +! {0x1fc3,0x1fc3,-1,9}, +! {0x1fd0,0x1fd1,1,8}, +! {0x1fe0,0x1fe1,1,8}, +! {0x1fe5,0x1fe5,-1,7}, +! {0x1ff3,0x1ff3,-1,9}, +! {0x214e,0x214e,-1,-28}, +! {0x2170,0x217f,1,-16}, +! {0x2184,0x2184,-1,-1}, +! {0x24d0,0x24e9,1,-26}, +! {0x2c30,0x2c5e,1,-48}, +! {0x2c61,0x2c61,-1,-1}, +! {0x2c65,0x2c65,-1,-10795}, +! {0x2c66,0x2c66,-1,-10792}, +! {0x2c68,0x2c6c,2,-1}, +! {0x2c73,0x2c76,3,-1}, +! {0x2c81,0x2ce3,2,-1}, +! {0x2cec,0x2cee,2,-1}, +! {0x2d00,0x2d25,1,-7264}, +! {0xa641,0xa65f,2,-1}, +! {0xa663,0xa66d,2,-1}, +! {0xa681,0xa697,2,-1}, +! {0xa723,0xa72f,2,-1}, +! {0xa733,0xa76f,2,-1}, +! {0xa77a,0xa77c,2,-1}, +! {0xa77f,0xa787,2,-1}, +! {0xa78c,0xa78c,-1,-1}, +! {0xff41,0xff5a,1,-32}, +! {0x10428,0x1044f,1,-40} + }; + + /* +*** ../vim-7.2.329/src/version.c 2010-01-12 15:42:03.000000000 +0100 +--- src/version.c 2010-01-12 18:16:55.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 330, + /**/ + +-- +From "know your smileys": + <|-) Chinese + <|-( Chinese and doesn't like these kind of jokes + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.331 b/source/ap/vim/patches/7.2.331 new file mode 100644 index 000000000..82f40a26c --- /dev/null +++ b/source/ap/vim/patches/7.2.331 @@ -0,0 +1,47 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.331 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.331 +Problem: Can't interrupt "echo list" for a very long list. +Solution: Call line_breakcheck() in list_join(). +Files: src/eval.c + + +*** ../vim-7.2.330/src/eval.c 2010-01-12 12:48:40.000000000 +0100 +--- src/eval.c 2010-01-12 15:59:28.000000000 +0100 +*************** +*** 6475,6480 **** +--- 6475,6481 ---- + vim_free(tofree); + if (s == NULL) + return FAIL; ++ line_breakcheck(); + } + return OK; + } +*** ../vim-7.2.330/src/version.c 2010-01-12 19:48:57.000000000 +0100 +--- src/version.c 2010-01-19 12:44:02.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 331, + /**/ + + +-- +hundred-and-one symptoms of being an internet addict: +116. You are living with your boyfriend who networks your respective + computers so you can sit in separate rooms and email each other + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.332 b/source/ap/vim/patches/7.2.332 new file mode 100644 index 000000000..7956d1ed8 --- /dev/null +++ b/source/ap/vim/patches/7.2.332 @@ -0,0 +1,101 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.332 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.332 +Problem: Crash when spell correcting triggers an autocommand that reloads + the buffer. +Solution: Make a copy of the line to be modified. (Dominique Pelle) +Files: src/spell.c + + +*** ../vim-7.2.331/src/spell.c 2009-07-22 11:03:38.000000000 +0200 +--- src/spell.c 2010-01-19 12:44:42.000000000 +0100 +*************** +*** 10306,10312 **** + /* Figure out if the word should be capitalised. */ + need_cap = check_need_cap(curwin->w_cursor.lnum, curwin->w_cursor.col); + +! line = ml_get_curline(); + + /* Get the list of suggestions. Limit to 'lines' - 2 or the number in + * 'spellsuggest', whatever is smaller. */ +--- 10306,10315 ---- + /* Figure out if the word should be capitalised. */ + need_cap = check_need_cap(curwin->w_cursor.lnum, curwin->w_cursor.col); + +! /* Make a copy of current line since autocommands may free the line. */ +! line = vim_strsave(ml_get_curline()); +! if (line == NULL) +! goto skip; + + /* Get the list of suggestions. Limit to 'lines' - 2 or the number in + * 'spellsuggest', whatever is smaller. */ +*************** +*** 10470,10475 **** +--- 10473,10480 ---- + curwin->w_cursor = prev_cursor; + + spell_find_cleanup(&sug); ++ skip: ++ vim_free(line); + } + + /* +*************** +*** 10931,10937 **** + rescore_suggestions(su); + + /* +! * While going throught the soundfold tree "su_maxscore" is the score + * for the soundfold word, limits the changes that are being tried, + * and "su_sfmaxscore" the rescored score, which is set by + * cleanup_suggestions(). +--- 10936,10942 ---- + rescore_suggestions(su); + + /* +! * While going through the soundfold tree "su_maxscore" is the score + * for the soundfold word, limits the changes that are being tried, + * and "su_sfmaxscore" the rescored score, which is set by + * cleanup_suggestions(). +*************** +*** 11415,11421 **** + char_u tword[MAXWLEN]; /* good word collected so far */ + trystate_T stack[MAXWLEN]; + char_u preword[MAXWLEN * 3]; /* word found with proper case; +! * concatanation of prefix compound + * words and split word. NUL terminated + * when going deeper but not when coming + * back. */ +--- 11420,11426 ---- + char_u tword[MAXWLEN]; /* good word collected so far */ + trystate_T stack[MAXWLEN]; + char_u preword[MAXWLEN * 3]; /* word found with proper case; +! * concatenation of prefix compound + * words and split word. NUL terminated + * when going deeper but not when coming + * back. */ +*** ../vim-7.2.331/src/version.c 2010-01-19 12:46:51.000000000 +0100 +--- src/version.c 2010-01-19 13:05:32.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 332, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +117. You are more comfortable typing in html. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.333 b/source/ap/vim/patches/7.2.333 new file mode 100644 index 000000000..02273b64b --- /dev/null +++ b/source/ap/vim/patches/7.2.333 @@ -0,0 +1,371 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.333 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.333 +Problem: Warnings from static code analysis. +Solution: Small changes to various lines. (Dominique Pelle) +Files: src/buffer.c, src/edit.c, src/ex_getln.c, src/fileio.c, + src/if_cscope.c, src/netbeans.c, src/ops.c, src/quickfix.c, + src/syntax.c, src/ui.c + + +*** ../vim-7.2.332/src/buffer.c 2009-05-17 13:30:58.000000000 +0200 +--- src/buffer.c 2010-01-19 12:50:24.000000000 +0100 +*************** +*** 315,321 **** + { + #ifdef FEAT_AUTOCMD + int is_curbuf; +! int nwindows = buf->b_nwindows; + #endif + int unload_buf = (action != 0); + int del_buf = (action == DOBUF_DEL || action == DOBUF_WIPE); +--- 315,321 ---- + { + #ifdef FEAT_AUTOCMD + int is_curbuf; +! int nwindows; + #endif + int unload_buf = (action != 0); + int del_buf = (action == DOBUF_DEL || action == DOBUF_WIPE); +*** ../vim-7.2.332/src/edit.c 2009-12-24 15:45:53.000000000 +0100 +--- src/edit.c 2010-01-19 12:53:18.000000000 +0100 +*************** +*** 4048,4054 **** + save_p_ic = p_ic; + p_ic = ignorecase(compl_pattern); + +! /* Find up to TAG_MANY matches. Avoids that an enourmous number + * of matches is found when compl_pattern is empty */ + if (find_tags(compl_pattern, &num_matches, &matches, + TAG_REGEXP | TAG_NAMES | TAG_NOIC | +--- 4048,4054 ---- + save_p_ic = p_ic; + p_ic = ignorecase(compl_pattern); + +! /* Find up to TAG_MANY matches. Avoids that an enormous number + * of matches is found when compl_pattern is empty */ + if (find_tags(compl_pattern, &num_matches, &matches, + TAG_REGEXP | TAG_NAMES | TAG_NOIC | +*************** +*** 4219,4225 **** + || IObuff[len - 2] == '!')))) + IObuff[len++] = ' '; + } +! /* copy as much as posible of the new word */ + if (tmp_ptr - ptr >= IOSIZE - len) + tmp_ptr = ptr + IOSIZE - len - 1; + STRNCPY(IObuff + len, ptr, tmp_ptr - ptr); +--- 4219,4225 ---- + || IObuff[len - 2] == '!')))) + IObuff[len++] = ' '; + } +! /* copy as much as possible of the new word */ + if (tmp_ptr - ptr >= IOSIZE - len) + tmp_ptr = ptr + IOSIZE - len - 1; + STRNCPY(IObuff + len, ptr, tmp_ptr - ptr); +*************** +*** 5827,5836 **** + #endif + && !has_format_option(FO_WRAP)) + +- { +- textwidth = 0; + break; +- } + if ((startcol = curwin->w_cursor.col) == 0) + break; + +--- 5827,5833 ---- +*** ../vim-7.2.332/src/ex_getln.c 2009-12-02 17:15:04.000000000 +0100 +--- src/ex_getln.c 2010-01-19 12:54:47.000000000 +0100 +*************** +*** 2193,2199 **** + { + if (ga_grow(&line_ga, 40) == FAIL) + break; +- pend = (char_u *)line_ga.ga_data + line_ga.ga_len; + + /* Get one character at a time. Don't use inchar(), it can't handle + * special characters. */ +--- 2193,2198 ---- +*************** +*** 3314,3320 **** + WILD_HOME_REPLACE|WILD_ADD_SLASH|WILD_SILENT|WILD_ESCAPE + |options, type); + vim_free(p1); +! /* longest match: make sure it is not shorter (happens with :help */ + if (p2 != NULL && type == WILD_LONGEST) + { + for (j = 0; j < xp->xp_pattern_len; ++j) +--- 3313,3319 ---- + WILD_HOME_REPLACE|WILD_ADD_SLASH|WILD_SILENT|WILD_ESCAPE + |options, type); + vim_free(p1); +! /* longest match: make sure it is not shorter, happens with :help */ + if (p2 != NULL && type == WILD_LONGEST) + { + for (j = 0; j < xp->xp_pattern_len; ++j) +*** ../vim-7.2.332/src/fileio.c 2009-12-31 14:52:48.000000000 +0100 +--- src/fileio.c 2010-01-19 12:56:59.000000000 +0100 +*************** +*** 7072,7079 **** + */ + for (i = 0; i < (int)(sizeof(tempdirs) / sizeof(char *)); ++i) + { +- size_t itmplen; + # ifndef HAVE_MKDTEMP + long nr; + long off; + # endif +--- 7072,7079 ---- + */ + for (i = 0; i < (int)(sizeof(tempdirs) / sizeof(char *)); ++i) + { + # ifndef HAVE_MKDTEMP ++ size_t itmplen; + long nr; + long off; + # endif +*************** +*** 7091,7097 **** + else + # endif + add_pathsep(itmp); +- itmplen = STRLEN(itmp); + + # ifdef HAVE_MKDTEMP + /* Leave room for filename */ +--- 7091,7096 ---- +*************** +*** 7104,7109 **** +--- 7103,7109 ---- + * otherwise it doesn't matter. The use of mkdir() avoids any + * security problems because of the predictable number. */ + nr = (mch_get_pid() + (long)time(NULL)) % 1000000L; ++ itmplen = STRLEN(itmp); + + /* Try up to 10000 different values until we find a name that + * doesn't exist. */ +*** ../vim-7.2.332/src/if_cscope.c 2009-07-09 21:22:36.000000000 +0200 +--- src/if_cscope.c 2010-01-19 12:57:58.000000000 +0100 +*************** +*** 2069,2075 **** + continue; + (void)strcpy(tbuf, matches[idx]); + +! if ((fname = strtok(tbuf, (const char *)"\t")) == NULL) + continue; + if ((fname = strtok(NULL, (const char *)"\t")) == NULL) + continue; +--- 2069,2075 ---- + continue; + (void)strcpy(tbuf, matches[idx]); + +! if (strtok(tbuf, (const char *)"\t") == NULL) + continue; + if ((fname = strtok(NULL, (const char *)"\t")) == NULL) + continue; +*** ../vim-7.2.332/src/netbeans.c 2009-09-11 14:19:41.000000000 +0200 +--- src/netbeans.c 2010-01-19 13:57:11.000000000 +0100 +*************** +*** 873,879 **** + { + #ifdef NBDEBUG + /* +! * This happens because the ExtEd can send a cammand or 2 after + * doing a stopDocumentListen command. It doesn't harm anything + * so I'm disabling it except for debugging. + */ +--- 883,889 ---- + { + #ifdef NBDEBUG + /* +! * This happens because the ExtEd can send a command or 2 after + * doing a stopDocumentListen command. It doesn't harm anything + * so I'm disabling it except for debugging. + */ +*************** +*** 1174,1180 **** + break; + } + } +! *q++ = '\0'; + + return buf; + } +--- 1184,1190 ---- + break; + } + } +! *q = '\0'; + + return buf; + } +*************** +*** 3070,3076 **** + } + + /* +! * Send netbeans an unmodufied command. + */ + void + netbeans_unmodified(buf_T *bufp UNUSED) +--- 3080,3086 ---- + } + + /* +! * Send netbeans an unmodified command. + */ + void + netbeans_unmodified(buf_T *bufp UNUSED) +*************** +*** 3366,3372 **** + + + /* +! * Add a sign of the reqested type at the requested location. + * + * Reverse engineering: + * Apparently an annotation is defined the first time it is used in a buffer. +--- 3380,3386 ---- + + + /* +! * Add a sign of the requested type at the requested location. + * + * Reverse engineering: + * Apparently an annotation is defined the first time it is used in a buffer. +*** ../vim-7.2.332/src/ops.c 2009-11-25 12:38:49.000000000 +0100 +--- src/ops.c 2010-01-19 13:04:46.000000000 +0100 +*************** +*** 5591,5603 **** + */ + if (has_mbyte) + { +- char_u *conv_str = str; + vimconv_T vc; + + vc.vc_type = CONV_NONE; + if (convert_setup(&vc, p_enc, (char_u *)"latin1") == OK) + { +! int intlen = len; + + conv_str = string_convert(&vc, str, &intlen); + len = intlen; +--- 5598,5610 ---- + */ + if (has_mbyte) + { + vimconv_T vc; + + vc.vc_type = CONV_NONE; + if (convert_setup(&vc, p_enc, (char_u *)"latin1") == OK) + { +! int intlen = len; +! char_u *conv_str; + + conv_str = string_convert(&vc, str, &intlen); + len = intlen; +*** ../vim-7.2.332/src/quickfix.c 2009-06-24 17:31:27.000000000 +0200 +--- src/quickfix.c 2010-01-19 13:12:29.000000000 +0100 +*************** +*** 1899,1905 **** + int i; + int idx1 = 1; + int idx2 = -1; +- int need_return = TRUE; + char_u *arg = eap->arg; + int all = eap->forceit; /* if not :cl!, only show + recognised errors */ +--- 1899,1904 ---- +*************** +*** 1939,1951 **** + { + if ((qfp->qf_valid || all) && idx1 <= i && i <= idx2) + { +! if (need_return) +! { +! msg_putchar('\n'); +! if (got_int) +! break; +! need_return = FALSE; +! } + + fname = NULL; + if (qfp->qf_fnum != 0 +--- 1938,1946 ---- + { + if ((qfp->qf_valid || all) && idx1 <= i && i <= idx2) + { +! msg_putchar('\n'); +! if (got_int) +! break; + + fname = NULL; + if (qfp->qf_fnum != 0 +*************** +*** 1988,1994 **** + IObuff, IOSIZE); + msg_prt_line(IObuff, FALSE); + out_flush(); /* show one line at a time */ +- need_return = TRUE; + } + + qfp = qfp->qf_next; +--- 1983,1988 ---- +*** ../vim-7.2.332/src/syntax.c 2009-12-16 18:13:04.000000000 +0100 +--- src/syntax.c 2010-01-19 13:12:56.000000000 +0100 +*************** +*** 4167,4173 **** + if (!HASHITEM_EMPTY(hi)) + { + --todo; +- kp = HI2KE(hi); + for (kp = HI2KE(hi); kp != NULL; kp = kp_next) + { + kp_next = kp->ke_next; +--- 4167,4172 ---- +*** ../vim-7.2.332/src/ui.c 2009-09-11 16:48:06.000000000 +0200 +--- src/ui.c 2010-01-19 13:14:04.000000000 +0100 +*************** +*** 2383,2389 **** + * 'enc' anyway. */ + if (has_mbyte) + { +! char_u *conv_buf = buffer; + vimconv_T vc; + + vc.vc_type = CONV_NONE; +--- 2383,2389 ---- + * 'enc' anyway. */ + if (has_mbyte) + { +! char_u *conv_buf; + vimconv_T vc; + + vc.vc_type = CONV_NONE; +*** ../vim-7.2.332/src/version.c 2010-01-19 13:06:42.000000000 +0100 +--- src/version.c 2010-01-19 14:55:50.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 333, + /**/ + +-- +An actual excerpt from a classified section of a city newspaper: +"Illiterate? Write today for free help!" + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.334 b/source/ap/vim/patches/7.2.334 new file mode 100644 index 000000000..1b88bbd6e --- /dev/null +++ b/source/ap/vim/patches/7.2.334 @@ -0,0 +1,347 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.334 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.334 +Problem: Postponing keys in Netbeans interface does not work properly. +Solution: Store the key string instead of the number. Avoid an infinite + loop. (Mostly by Xavier de Gaye) +Files: src/netbeans.c, src/proto/netbeans.pro + + +*** ../vim-7.2.333/src/netbeans.c 2010-01-19 14:59:14.000000000 +0100 +--- src/netbeans.c 2010-01-19 15:12:17.000000000 +0100 +*************** +*** 70,76 **** + static pos_T *off2pos __ARGS((buf_T *, long)); + static pos_T *get_off_or_lnum __ARGS((buf_T *buf, char_u **argp)); + static long get_buf_size __ARGS((buf_T *)); +! static void netbeans_keystring __ARGS((int key, char *keystr)); + static void special_keys __ARGS((char_u *args)); + + static void netbeans_connect __ARGS((void)); +--- 70,77 ---- + static pos_T *off2pos __ARGS((buf_T *, long)); + static pos_T *get_off_or_lnum __ARGS((buf_T *buf, char_u **argp)); + static long get_buf_size __ARGS((buf_T *)); +! static int netbeans_keystring __ARGS((char_u *keystr)); +! static void postpone_keycommand __ARGS((char_u *keystr)); + static void special_keys __ARGS((char_u *args)); + + static void netbeans_connect __ARGS((void)); +*************** +*** 502,508 **** + + struct keyqueue + { +! int key; + struct keyqueue *next; + struct keyqueue *prev; + }; +--- 503,509 ---- + + struct keyqueue + { +! char_u *keystr; + struct keyqueue *next; + struct keyqueue *prev; + }; +*************** +*** 514,526 **** + + /* + * Queue up key commands sent from netbeans. + */ + static void +! postpone_keycommand(int key) + { + keyQ_T *node; + + node = (keyQ_T *)alloc(sizeof(keyQ_T)); + + if (keyHead.next == NULL) /* initialize circular queue */ + { +--- 515,531 ---- + + /* + * Queue up key commands sent from netbeans. ++ * We store the string, because it may depend on the global mod_mask and ++ * :nbkey doesn't have a key number. + */ + static void +! postpone_keycommand(char_u *keystr) + { + keyQ_T *node; + + node = (keyQ_T *)alloc(sizeof(keyQ_T)); ++ if (node == NULL) ++ return; /* out of memory, drop the key */ + + if (keyHead.next == NULL) /* initialize circular queue */ + { +*************** +*** 534,540 **** + keyHead.prev->next = node; + keyHead.prev = node; + +! node->key = key; + } + + /* +--- 539,545 ---- + keyHead.prev->next = node; + keyHead.prev = node; + +! node->keystr = vim_strsave(keystr); + } + + /* +*************** +*** 543,557 **** + static void + handle_key_queue(void) + { +! while (keyHead.next && keyHead.next != &keyHead) + { + /* first, unlink the node */ + keyQ_T *node = keyHead.next; + keyHead.next = node->next; + node->next->prev = node->prev; + +! /* now, send the keycommand */ +! netbeans_keycommand(node->key); + + /* Finally, dispose of the node */ + vim_free(node); +--- 548,567 ---- + static void + handle_key_queue(void) + { +! int postponed = FALSE; +! +! while (!postponed && keyHead.next && keyHead.next != &keyHead) + { + /* first, unlink the node */ + keyQ_T *node = keyHead.next; + keyHead.next = node->next; + node->next->prev = node->prev; + +! /* Now, send the keycommand. This may cause it to be postponed again +! * and change keyHead. */ +! if (node->keystr != NULL) +! postponed = !netbeans_keystring(node->keystr); +! vim_free(node->keystr); + + /* Finally, dispose of the node */ + vim_free(node); +*************** +*** 2495,2501 **** + } + else + { +! nbdebug((" Buffer has no changes!\n")); + } + /* =====================================================================*/ + } +--- 2505,2511 ---- + } + else + { +! nbdebug((" Buffer has no changes!\n")); + } + /* =====================================================================*/ + } +*************** +*** 2658,2664 **** + ex_nbkey(eap) + exarg_T *eap; + { +! netbeans_keystring(0, (char *)eap->arg); + } + + +--- 2668,2674 ---- + ex_nbkey(eap) + exarg_T *eap; + { +! (void)netbeans_keystring(eap->arg); + } + + +*************** +*** 2680,2686 **** + } + + /* +! * Convert key to netbeans name. + */ + static void + netbeans_keyname(int key, char *buf) +--- 2690,2696 ---- + } + + /* +! * Convert key to netbeans name. This uses the global "mod_mask". + */ + static void + netbeans_keyname(int key, char *buf) +*************** +*** 3127,3149 **** + /* + * Send a keypress event back to netbeans. This usually simulates some + * kind of function key press. This function operates on a key code. + */ +! void + netbeans_keycommand(int key) + { + char keyName[60]; + + netbeans_keyname(key, keyName); +! netbeans_keystring(key, keyName); + } + + + /* + * Send a keypress event back to netbeans. This usually simulates some + * kind of function key press. This function operates on a key string. + */ +! static void +! netbeans_keystring(int key, char *keyName) + { + char buf[2*MAXPATHL]; + int bufno = nb_getbufno(curbuf); +--- 3137,3163 ---- + /* + * Send a keypress event back to netbeans. This usually simulates some + * kind of function key press. This function operates on a key code. ++ * Return TRUE when the key was sent, FALSE when the command has been ++ * postponed. + */ +! int + netbeans_keycommand(int key) + { + char keyName[60]; + + netbeans_keyname(key, keyName); +! return netbeans_keystring((char_u *)keyName); + } + + + /* + * Send a keypress event back to netbeans. This usually simulates some + * kind of function key press. This function operates on a key string. ++ * Return TRUE when the key was sent, FALSE when the command has been ++ * postponed. + */ +! static int +! netbeans_keystring(char_u *keyName) + { + char buf[2*MAXPATHL]; + int bufno = nb_getbufno(curbuf); +*************** +*** 3151,3157 **** + char_u *q; + + if (!haveConnection) +! return; + + + if (bufno == -1) +--- 3165,3171 ---- + char_u *q; + + if (!haveConnection) +! return TRUE; + + + if (bufno == -1) +*************** +*** 3160,3166 **** + q = curbuf->b_ffname == NULL ? (char_u *)"" + : nb_quote(curbuf->b_ffname); + if (q == NULL) +! return; + vim_snprintf(buf, sizeof(buf), "0:fileOpened=%d \"%s\" %s %s\n", 0, + q, + "T", /* open in NetBeans */ +--- 3174,3180 ---- + q = curbuf->b_ffname == NULL ? (char_u *)"" + : nb_quote(curbuf->b_ffname); + if (q == NULL) +! return TRUE; + vim_snprintf(buf, sizeof(buf), "0:fileOpened=%d \"%s\" %s %s\n", 0, + q, + "T", /* open in NetBeans */ +*************** +*** 3170,3178 **** + nbdebug(("EVT: %s", buf)); + nb_send(buf, "netbeans_keycommand"); + +! if (key > 0) +! postpone_keycommand(key); +! return; + } + + /* sync the cursor position */ +--- 3184,3191 ---- + nbdebug(("EVT: %s", buf)); + nb_send(buf, "netbeans_keycommand"); + +! postpone_keycommand(keyName); +! return FALSE; + } + + /* sync the cursor position */ +*************** +*** 3198,3203 **** +--- 3211,3217 ---- + off, (long)curwin->w_cursor.lnum, (long)curwin->w_cursor.col); + nbdebug(("EVT: %s", buf)); + nb_send(buf, "netbeans_keycommand"); ++ return TRUE; + } + + +*** ../vim-7.2.333/src/proto/netbeans.pro 2009-01-06 16:13:42.000000000 +0100 +--- src/proto/netbeans.pro 2010-01-19 13:31:01.000000000 +0100 +*************** +*** 16,22 **** + void netbeans_removed __ARGS((buf_T *bufp, linenr_T linenr, colnr_T col, long len)); + void netbeans_unmodified __ARGS((buf_T *bufp)); + void netbeans_button_release __ARGS((int button)); +! void netbeans_keycommand __ARGS((int key)); + void netbeans_save_buffer __ARGS((buf_T *bufp)); + void netbeans_deleted_all_lines __ARGS((buf_T *bufp)); + int netbeans_is_guarded __ARGS((linenr_T top, linenr_T bot)); +--- 16,22 ---- + void netbeans_removed __ARGS((buf_T *bufp, linenr_T linenr, colnr_T col, long len)); + void netbeans_unmodified __ARGS((buf_T *bufp)); + void netbeans_button_release __ARGS((int button)); +! int netbeans_keycommand __ARGS((int key)); + void netbeans_save_buffer __ARGS((buf_T *bufp)); + void netbeans_deleted_all_lines __ARGS((buf_T *bufp)); + int netbeans_is_guarded __ARGS((linenr_T top, linenr_T bot)); +*** ../vim-7.2.333/src/version.c 2010-01-19 14:59:14.000000000 +0100 +--- src/version.c 2010-01-19 15:08:44.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 334, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +119. You are reading a book and look for the scroll bar to get to + the next page. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.335 b/source/ap/vim/patches/7.2.335 new file mode 100644 index 000000000..df7f641c9 --- /dev/null +++ b/source/ap/vim/patches/7.2.335 @@ -0,0 +1,103 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.335 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.335 +Problem: The CTRL-] command escapes too many characters. +Solution: Use a different list of characters to be escaped. (Sergey Khorev) +Files: src/normal.c + + +*** ../vim-7.2.334/src/normal.c 2010-01-12 15:42:03.000000000 +0100 +--- src/normal.c 2010-01-19 15:20:11.000000000 +0100 +*************** +*** 5406,5411 **** +--- 5406,5412 ---- + int n = 0; /* init for GCC */ + int cmdchar; + int g_cmd; /* "g" command */ ++ int tag_cmd = FALSE; + char_u *aux_ptr; + int isman; + int isman_s; +*************** +*** 5515,5520 **** +--- 5516,5522 ---- + break; + + case ']': ++ tag_cmd = TRUE; + #ifdef FEAT_CSCOPE + if (p_cst) + STRCPY(buf, "cstag "); +*************** +*** 5526,5535 **** + default: + if (curbuf->b_help) + STRCPY(buf, "he! "); +- else if (g_cmd) +- STRCPY(buf, "tj "); + else +! sprintf((char *)buf, "%ldta ", cap->count0); + } + + /* +--- 5528,5541 ---- + default: + if (curbuf->b_help) + STRCPY(buf, "he! "); + else +! { +! tag_cmd = TRUE; +! if (g_cmd) +! STRCPY(buf, "tj "); +! else +! sprintf((char *)buf, "%ldta ", cap->count0); +! } + } + + /* +*************** +*** 5562,5569 **** + aux_ptr = (char_u *)(p_magic ? "/.*~[^$\\" : "/^$\\"); + else if (cmdchar == '#') + aux_ptr = (char_u *)(p_magic ? "/?.*~[^$\\" : "/?^$\\"); +! else + /* Don't escape spaces and Tabs in a tag with a backslash */ + aux_ptr = (char_u *)"\\|\"\n*?["; + + p = buf + STRLEN(buf); +--- 5568,5577 ---- + aux_ptr = (char_u *)(p_magic ? "/.*~[^$\\" : "/^$\\"); + else if (cmdchar == '#') + aux_ptr = (char_u *)(p_magic ? "/?.*~[^$\\" : "/?^$\\"); +! else if (tag_cmd) + /* Don't escape spaces and Tabs in a tag with a backslash */ ++ aux_ptr = (char_u *)"\\|\"\n["; ++ else + aux_ptr = (char_u *)"\\|\"\n*?["; + + p = buf + STRLEN(buf); +*** ../vim-7.2.334/src/version.c 2010-01-19 15:12:33.000000000 +0100 +--- src/version.c 2010-01-19 15:22:44.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 335, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +120. You ask a friend, "What's that big shiny thing?" He says, "It's the sun." + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.336 b/source/ap/vim/patches/7.2.336 new file mode 100644 index 000000000..a6765922f --- /dev/null +++ b/source/ap/vim/patches/7.2.336 @@ -0,0 +1,841 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.336 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.336 +Problem: MzScheme interface can't evaluate an expression. +Solution: Add mzeval(). (Sergey Khorev) +Files: runtime/doc/eval.txt, runtime/doc/if_mzsch.txt, + runtime/doc/usr_41.txt, src/eval.c, src/if_mzsch.c, + src/proto/eval.pro, src/proto/if_mzsch.pro, + src/testdir/Make_dos.mak, src/testdir/Make_ming.mak, + src/testdir/Makefile, src/testdir/main.aap, src/testdir/test1.in, + src/testdir/test70.in, src/testdir/test70.ok + + +*** ../vim-7.2.335/runtime/doc/eval.txt 2009-11-17 12:20:30.000000000 +0100 +--- runtime/doc/eval.txt 2010-01-19 15:30:50.000000000 +0100 +*************** +*** 1815,1825 **** + List match and submatches of {pat} in {expr} + matchstr( {expr}, {pat}[, {start}[, {count}]]) + String {count}'th match of {pat} in {expr} +! max({list}) Number maximum value of items in {list} +! min({list}) Number minimum value of items in {list} +! mkdir({name} [, {path} [, {prot}]]) + Number create directory {name} + mode( [expr]) String current editing mode + nextnonblank( {lnum}) Number line nr of non-blank line >= {lnum} + nr2char( {expr}) String single char with ASCII value {expr} + pathshorten( {expr}) String shorten directory names in a path +--- 1821,1832 ---- + List match and submatches of {pat} in {expr} + matchstr( {expr}, {pat}[, {start}[, {count}]]) + String {count}'th match of {pat} in {expr} +! max( {list}) Number maximum value of items in {list} +! min( {list}) Number minimum value of items in {list} +! mkdir( {name} [, {path} [, {prot}]]) + Number create directory {name} + mode( [expr]) String current editing mode ++ mzeval( {expr}) any evaluate |MzScheme| expression + nextnonblank( {lnum}) Number line nr of non-blank line >= {lnum} + nr2char( {expr}) String single char with ASCII value {expr} + pathshorten( {expr}) String shorten directory names in a path +*************** +*** 4090,4095 **** +--- 4103,4125 ---- + "c" or "n". + Also see |visualmode()|. + ++ mzeval({expr}) *mzeval()* ++ Evaluate MzScheme expression {expr} and return its result ++ convert to Vim data structures. ++ Numbers and strings are returned as they are. ++ Pairs (including lists and improper lists) and vectors are ++ returned as Vim |Lists|. ++ Hash tables are represented as Vim |Dictionary| type with keys ++ converted to strings. ++ All other types are converted to string with display function. ++ Examples: > ++ :mz (define l (list 1 2 3)) ++ :mz (define h (make-hash)) (hash-set! h "list" l) ++ :echo mzeval("l") ++ :echo mzeval("h") ++ < ++ {only available when compiled with the |+mzscheme| feature} ++ + nextnonblank({lnum}) *nextnonblank()* + Return the line number of the first line at or below {lnum} + that is not blank. Example: > +*** ../vim-7.2.335/runtime/doc/if_mzsch.txt 2009-06-24 17:51:01.000000000 +0200 +--- runtime/doc/if_mzsch.txt 2010-01-19 15:33:00.000000000 +0100 +*************** +*** 1,4 **** +! *if_mzsch.txt* For Vim version 7.2. Last change: 2009 Jun 24 + + + VIM REFERENCE MANUAL by Sergey Khorev +--- 1,4 ---- +! *if_mzsch.txt* For Vim version 7.2. Last change: 2010 Jan 19 + + + VIM REFERENCE MANUAL by Sergey Khorev +*************** +*** 9,16 **** + 1. Commands |mzscheme-commands| + 2. Examples |mzscheme-examples| + 3. Threads |mzscheme-threads| +! 4. The Vim access procedures |mzscheme-vim| +! 5. Dynamic loading |mzscheme-dynamic| + + {Vi does not have any of these commands} + +--- 9,17 ---- + 1. Commands |mzscheme-commands| + 2. Examples |mzscheme-examples| + 3. Threads |mzscheme-threads| +! 4. Vim access from MzScheme |mzscheme-vim| +! 5. mzeval() Vim function |mzscheme-mzeval| +! 6. Dynamic loading |mzscheme-dynamic| + + {Vi does not have any of these commands} + +*************** +*** 142,148 **** + GUI version. + + ============================================================================== +! 5. VIM Functions *mzscheme-vim* + + *mzscheme-vimext* + The 'vimext' module provides access to procedures defined in the MzScheme +--- 143,149 ---- + GUI version. + + ============================================================================== +! 4. Vim access from MzScheme *mzscheme-vim* + + *mzscheme-vimext* + The 'vimext' module provides access to procedures defined in the MzScheme +*************** +*** 231,237 **** + (set-cursor (line . col) [window]) Set cursor position. + + ============================================================================== +! 5. Dynamic loading *mzscheme-dynamic* *E815* + + On MS-Windows the MzScheme libraries can be loaded dynamically. The |:version| + output then includes |+mzscheme/dyn|. +--- 232,244 ---- + (set-cursor (line . col) [window]) Set cursor position. + + ============================================================================== +! 5. mzeval() Vim function *mzscheme-mzeval* +! +! To facilitate bi-directional interface, you can use |mzeval| function to +! evaluate MzScheme expressions and pass their values to VimL. +! +! ============================================================================== +! 6. Dynamic loading *mzscheme-dynamic* *E815* + + On MS-Windows the MzScheme libraries can be loaded dynamically. The |:version| + output then includes |+mzscheme/dyn|. +*** ../vim-7.2.335/runtime/doc/usr_41.txt 2008-08-09 19:36:54.000000000 +0200 +--- runtime/doc/usr_41.txt 2010-01-19 15:29:01.000000000 +0100 +*************** +*** 868,873 **** +--- 868,875 ---- + taglist() get list of matching tags + tagfiles() get a list of tags files + ++ mzeval() evaluate |MzScheme| expression ++ + ============================================================================== + *41.7* Defining a function + +*** ../vim-7.2.335/src/eval.c 2010-01-19 12:46:51.000000000 +0100 +--- src/eval.c 2010-01-19 15:48:12.000000000 +0100 +*************** +*** 433,439 **** + static long list_find_nr __ARGS((list_T *l, long idx, int *errorp)); + static long list_idx_of_item __ARGS((list_T *l, listitem_T *item)); + static void list_append __ARGS((list_T *l, listitem_T *item)); +- static int list_append_tv __ARGS((list_T *l, typval_T *tv)); + static int list_append_number __ARGS((list_T *l, varnumber_T n)); + static int list_insert_tv __ARGS((list_T *l, typval_T *tv, listitem_T *item)); + static int list_extend __ARGS((list_T *l1, list_T *l2, listitem_T *bef)); +--- 433,438 ---- +*************** +*** 448,459 **** + static void set_ref_in_item __ARGS((typval_T *tv, int copyID)); + static void dict_unref __ARGS((dict_T *d)); + static void dict_free __ARGS((dict_T *d, int recurse)); +- static dictitem_T *dictitem_alloc __ARGS((char_u *key)); + static dictitem_T *dictitem_copy __ARGS((dictitem_T *org)); + static void dictitem_remove __ARGS((dict_T *dict, dictitem_T *item)); +- static void dictitem_free __ARGS((dictitem_T *item)); + static dict_T *dict_copy __ARGS((dict_T *orig, int deep, int copyID)); +- static int dict_add __ARGS((dict_T *d, dictitem_T *item)); + static long dict_len __ARGS((dict_T *d)); + static dictitem_T *dict_find __ARGS((dict_T *d, char_u *key, int len)); + static char_u *dict2string __ARGS((typval_T *tv, int copyID)); +--- 447,455 ---- +*************** +*** 628,633 **** +--- 624,632 ---- + static void f_mkdir __ARGS((typval_T *argvars, typval_T *rettv)); + #endif + static void f_mode __ARGS((typval_T *argvars, typval_T *rettv)); ++ #ifdef FEAT_MZSCHEME ++ static void f_mzeval __ARGS((typval_T *argvars, typval_T *rettv)); ++ #endif + static void f_nextnonblank __ARGS((typval_T *argvars, typval_T *rettv)); + static void f_nr2char __ARGS((typval_T *argvars, typval_T *rettv)); + static void f_pathshorten __ARGS((typval_T *argvars, typval_T *rettv)); +*************** +*** 764,770 **** + static int var_check_ro __ARGS((int flags, char_u *name)); + static int var_check_fixed __ARGS((int flags, char_u *name)); + static int tv_check_lock __ARGS((int lock, char_u *name)); +- static void copy_tv __ARGS((typval_T *from, typval_T *to)); + static int item_copy __ARGS((typval_T *from, typval_T *to, int deep, int copyID)); + static char_u *find_option_end __ARGS((char_u **arg, int *opt_flags)); + static char_u *trans_function_name __ARGS((char_u **pp, int skip, int flags, funcdict_T *fd)); +--- 763,768 ---- +*************** +*** 6155,6161 **** + * Append typval_T "tv" to the end of list "l". + * Return FAIL when out of memory. + */ +! static int + list_append_tv(l, tv) + list_T *l; + typval_T *tv; +--- 6153,6159 ---- + * Append typval_T "tv" to the end of list "l". + * Return FAIL when out of memory. + */ +! int + list_append_tv(l, tv) + list_T *l; + typval_T *tv; +*************** +*** 6812,6818 **** + * Note that the value of the item "di_tv" still needs to be initialized! + * Returns NULL when out of memory. + */ +! static dictitem_T * + dictitem_alloc(key) + char_u *key; + { +--- 6810,6816 ---- + * Note that the value of the item "di_tv" still needs to be initialized! + * Returns NULL when out of memory. + */ +! dictitem_T * + dictitem_alloc(key) + char_u *key; + { +*************** +*** 6868,6874 **** + /* + * Free a dict item. Also clears the value. + */ +! static void + dictitem_free(item) + dictitem_T *item; + { +--- 6866,6872 ---- + /* + * Free a dict item. Also clears the value. + */ +! void + dictitem_free(item) + dictitem_T *item; + { +*************** +*** 6948,6954 **** + * Add item "item" to Dictionary "d". + * Returns FAIL when out of memory and when key already existed. + */ +! static int + dict_add(d, item) + dict_T *d; + dictitem_T *item; +--- 6946,6952 ---- + * Add item "item" to Dictionary "d". + * Returns FAIL when out of memory and when key already existed. + */ +! int + dict_add(d, item) + dict_T *d; + dictitem_T *item; +*************** +*** 7699,7704 **** +--- 7697,7705 ---- + {"mkdir", 1, 3, f_mkdir}, + #endif + {"mode", 0, 1, f_mode}, ++ #ifdef FEAT_MZSCHEME ++ {"mzeval", 1, 1, f_mzeval}, ++ #endif + {"nextnonblank", 1, 1, f_nextnonblank}, + {"nr2char", 1, 1, f_nr2char}, + {"pathshorten", 1, 1, f_pathshorten}, +*************** +*** 13591,13596 **** +--- 13592,13614 ---- + rettv->v_type = VAR_STRING; + } + ++ #ifdef FEAT_MZSCHEME ++ /* ++ * "mzeval()" function ++ */ ++ static void ++ f_mzeval(argvars, rettv) ++ typval_T *argvars; ++ typval_T *rettv; ++ { ++ char_u *str; ++ char_u buf[NUMBUFLEN]; ++ ++ str = get_tv_string_buf(&argvars[0], buf); ++ do_mzeval(str, rettv); ++ } ++ #endif ++ + /* + * "nextnonblank()" function + */ +*************** +*** 19274,19280 **** + * It is OK for "from" and "to" to point to the same item. This is used to + * make a copy later. + */ +! static void + copy_tv(from, to) + typval_T *from; + typval_T *to; +--- 19292,19298 ---- + * It is OK for "from" and "to" to point to the same item. This is used to + * make a copy later. + */ +! void + copy_tv(from, to) + typval_T *from; + typval_T *to; +*** ../vim-7.2.335/src/if_mzsch.c 2009-12-16 19:02:05.000000000 +0100 +--- src/if_mzsch.c 2010-01-19 15:43:05.000000000 +0100 +*************** +*** 170,175 **** +--- 170,177 ---- + #ifdef FEAT_EVAL + static Scheme_Object *vim_to_mzscheme(typval_T *vim_value, int depth, + Scheme_Hash_Table *visited); ++ static int mzscheme_to_vim(Scheme_Object *obj, typval_T *tv, int depth, ++ Scheme_Hash_Table *visited); + #endif + + #ifdef MZ_PRECISE_GC +*************** +*** 2733,2738 **** +--- 2735,2959 ---- + MZ_GC_UNREG(); + return result; + } ++ ++ static int ++ mzscheme_to_vim(Scheme_Object *obj, typval_T *tv, int depth, ++ Scheme_Hash_Table *visited) ++ { ++ int status = OK; ++ typval_T *found; ++ MZ_GC_CHECK(); ++ if (depth > 100) /* limit the deepest recursion level */ ++ { ++ tv->v_type = VAR_NUMBER; ++ tv->vval.v_number = 0; ++ return FAIL; ++ } ++ ++ found = (typval_T *)scheme_hash_get(visited, obj); ++ if (found != NULL) ++ copy_tv(found, tv); ++ else if (SCHEME_VOIDP(obj)) ++ { ++ tv->v_type = VAR_NUMBER; ++ tv->vval.v_number = 0; ++ } ++ else if (SCHEME_INTP(obj)) ++ { ++ tv->v_type = VAR_NUMBER; ++ tv->vval.v_number = SCHEME_INT_VAL(obj); ++ } ++ else if (SCHEME_BOOLP(obj)) ++ { ++ tv->v_type = VAR_NUMBER; ++ tv->vval.v_number = SCHEME_TRUEP(obj); ++ } ++ # ifdef FEAT_FLOAT ++ else if (SCHEME_DBLP(obj)) ++ { ++ tv->v_type = VAR_FLOAT; ++ tv->vval.v_float = SCHEME_DBL_VAL(obj); ++ } ++ # endif ++ else if (SCHEME_STRINGP(obj)) ++ { ++ tv->v_type = VAR_STRING; ++ tv->vval.v_string = vim_strsave((char_u *)SCHEME_STR_VAL(obj)); ++ } ++ else if (SCHEME_VECTORP(obj) || SCHEME_NULLP(obj) ++ || SCHEME_PAIRP(obj) || SCHEME_MUTABLE_PAIRP(obj)) ++ { ++ list_T *list = list_alloc(); ++ if (list == NULL) ++ status = FAIL; ++ else ++ { ++ int i; ++ Scheme_Object *curr = NULL; ++ Scheme_Object *cval = NULL; ++ /* temporary var to hold current element of vectors and pairs */ ++ typval_T *v; ++ ++ MZ_GC_DECL_REG(2); ++ MZ_GC_VAR_IN_REG(0, curr); ++ MZ_GC_VAR_IN_REG(1, cval); ++ MZ_GC_REG(); ++ ++ tv->v_type = VAR_LIST; ++ tv->vval.v_list = list; ++ ++list->lv_refcount; ++ ++ v = (typval_T *)alloc(sizeof(typval_T)); ++ if (v == NULL) ++ status = FAIL; ++ else ++ { ++ /* add the value in advance to allow handling of self-referencial ++ * data structures */ ++ typval_T *visited_tv = (typval_T *)alloc(sizeof(typval_T)); ++ copy_tv(tv, visited_tv); ++ scheme_hash_set(visited, obj, (Scheme_Object *)visited_tv); ++ ++ if (SCHEME_VECTORP(obj)) ++ { ++ for (i = 0; i < SCHEME_VEC_SIZE(obj); ++i) ++ { ++ cval = SCHEME_VEC_ELS(obj)[i]; ++ status = mzscheme_to_vim(cval, v, depth + 1, visited); ++ if (status == FAIL) ++ break; ++ status = list_append_tv(list, v); ++ clear_tv(v); ++ if (status == FAIL) ++ break; ++ } ++ } ++ else if (SCHEME_PAIRP(obj) || SCHEME_MUTABLE_PAIRP(obj)) ++ { ++ for (curr = obj; ++ SCHEME_PAIRP(curr) || SCHEME_MUTABLE_PAIRP(curr); ++ curr = SCHEME_CDR(curr)) ++ { ++ cval = SCHEME_CAR(curr); ++ status = mzscheme_to_vim(cval, v, depth + 1, visited); ++ if (status == FAIL) ++ break; ++ status = list_append_tv(list, v); ++ clear_tv(v); ++ if (status == FAIL) ++ break; ++ } ++ /* impoper list not terminated with null ++ * need to handle the last element */ ++ if (status == OK && !SCHEME_NULLP(curr)) ++ { ++ status = mzscheme_to_vim(cval, v, depth + 1, visited); ++ if (status == OK) ++ { ++ status = list_append_tv(list, v); ++ clear_tv(v); ++ } ++ } ++ } ++ /* nothing to do for scheme_null */ ++ vim_free(v); ++ } ++ MZ_GC_UNREG(); ++ } ++ } ++ else if (SCHEME_HASHTP(obj)) ++ { ++ int i; ++ dict_T *dict; ++ Scheme_Object *key = NULL; ++ Scheme_Object *val = NULL; ++ ++ MZ_GC_DECL_REG(2); ++ MZ_GC_VAR_IN_REG(0, key); ++ MZ_GC_VAR_IN_REG(1, val); ++ MZ_GC_REG(); ++ ++ dict = dict_alloc(); ++ if (dict == NULL) ++ status = FAIL; ++ else ++ { ++ typval_T *visited_tv = (typval_T *)alloc(sizeof(typval_T)); ++ ++ tv->v_type = VAR_DICT; ++ tv->vval.v_dict = dict; ++ ++dict->dv_refcount; ++ ++ copy_tv(tv, visited_tv); ++ scheme_hash_set(visited, obj, (Scheme_Object *)visited_tv); ++ ++ for (i = 0; i < ((Scheme_Hash_Table *)obj)->size; ++i) ++ { ++ if (((Scheme_Hash_Table *) obj)->vals[i] != NULL) ++ { ++ /* generate item for `diplay'ed Scheme key */ ++ dictitem_T *item = dictitem_alloc((char_u *)string_to_line( ++ ((Scheme_Hash_Table *) obj)->keys[i])); ++ /* convert Scheme val to Vim and add it to the dict */ ++ if (mzscheme_to_vim(((Scheme_Hash_Table *) obj)->vals[i], ++ &item->di_tv, depth + 1, visited) == FAIL ++ || dict_add(dict, item) == FAIL) ++ { ++ dictitem_free(item); ++ status = FAIL; ++ break; ++ } ++ } ++ ++ } ++ } ++ MZ_GC_UNREG(); ++ } ++ else ++ { ++ /* `display' any other value to string */ ++ tv->v_type = VAR_STRING; ++ tv->vval.v_string = (char_u *)string_to_line(obj); ++ } ++ return status; ++ } ++ ++ void ++ do_mzeval(char_u *str, typval_T *rettv) ++ { ++ int i; ++ Scheme_Object *ret = NULL; ++ Scheme_Hash_Table *visited = NULL; ++ ++ MZ_GC_DECL_REG(2); ++ MZ_GC_VAR_IN_REG(0, ret); ++ MZ_GC_VAR_IN_REG(0, visited); ++ MZ_GC_REG(); ++ ++ if (mzscheme_init()) ++ { ++ MZ_GC_UNREG(); ++ return; ++ } ++ ++ MZ_GC_CHECK(); ++ visited = scheme_make_hash_table(SCHEME_hash_ptr); ++ MZ_GC_CHECK(); ++ ++ if (eval_with_exn_handling(str, do_eval, &ret) == OK) ++ mzscheme_to_vim(ret, rettv, 1, visited); ++ ++ for (i = 0; i < visited->size; ++i) ++ { ++ /* free up remembered objects */ ++ if (visited->vals[i] != NULL) ++ { ++ free_tv((typval_T *)visited->vals[i]); ++ } ++ } ++ ++ MZ_GC_UNREG(); ++ } + #endif + + /* +*** ../vim-7.2.335/src/proto/eval.pro 2009-09-30 15:15:33.000000000 +0200 +--- src/proto/eval.pro 2010-01-19 15:45:39.000000000 +0100 +*************** +*** 47,56 **** +--- 47,60 ---- + void list_free __ARGS((list_T *l, int recurse)); + dictitem_T *dict_lookup __ARGS((hashitem_T *hi)); + char_u *list_find_str __ARGS((list_T *l, long idx)); ++ int list_append_tv __ARGS((list_T *l, typval_T *tv)); + int list_append_dict __ARGS((list_T *list, dict_T *dict)); + int list_append_string __ARGS((list_T *l, char_u *str, int len)); + int garbage_collect __ARGS((void)); + dict_T *dict_alloc __ARGS((void)); ++ dictitem_T *dictitem_alloc __ARGS((char_u *key)); ++ void dictitem_free __ARGS((dictitem_T *item)); ++ int dict_add __ARGS((dict_T *d, dictitem_T *item)); + int dict_add_nr_str __ARGS((dict_T *d, char *key, long nr, char_u *str)); + char_u *get_dict_string __ARGS((dict_T *d, char_u *key, int save)); + long get_dict_number __ARGS((dict_T *d, char_u *key)); +*************** +*** 77,82 **** +--- 81,87 ---- + void new_script_vars __ARGS((scid_T id)); + void init_var_dict __ARGS((dict_T *dict, dictitem_T *dict_var)); + void vars_clear __ARGS((hashtab_T *ht)); ++ void copy_tv __ARGS((typval_T *from, typval_T *to)); + void ex_echo __ARGS((exarg_T *eap)); + void ex_echohl __ARGS((exarg_T *eap)); + void ex_execute __ARGS((exarg_T *eap)); +*** ../vim-7.2.335/src/proto/if_mzsch.pro 2009-12-16 19:02:05.000000000 +0100 +--- src/proto/if_mzsch.pro 2010-01-19 15:29:01.000000000 +0100 +*************** +*** 15,18 **** +--- 15,19 ---- + void *mzvim_eval_string __ARGS((char_u *str)); + int mzthreads_allowed __ARGS((void)); + void mzscheme_main __ARGS((void)); ++ void do_mzeval __ARGS((char_u *str, typval_T *rettv)); + /* vim: set ft=c : */ +*** ../vim-7.2.335/src/testdir/Make_dos.mak 2009-11-17 17:57:10.000000000 +0100 +--- src/testdir/Make_dos.mak 2010-01-19 15:43:48.000000000 +0100 +*************** +*** 29,35 **** + test42.out test52.out test65.out test66.out test67.out \ + test68.out test69.out + +! SCRIPTS32 = test50.out + + SCRIPTS_GUI = test16.out + +--- 29,35 ---- + test42.out test52.out test65.out test66.out test67.out \ + test68.out test69.out + +! SCRIPTS32 = test50.out test70.out + + SCRIPTS_GUI = test16.out + +*** ../vim-7.2.335/src/testdir/Make_ming.mak 2009-11-17 17:57:10.000000000 +0100 +--- src/testdir/Make_ming.mak 2010-01-19 15:29:01.000000000 +0100 +*************** +*** 48,54 **** + test42.out test52.out test65.out test66.out test67.out \ + test68.out test69.out + +! SCRIPTS32 = test50.out + + SCRIPTS_GUI = test16.out + +--- 48,54 ---- + test42.out test52.out test65.out test66.out test67.out \ + test68.out test69.out + +! SCRIPTS32 = test50.out test70.out + + SCRIPTS_GUI = test16.out + +*************** +*** 78,83 **** +--- 78,84 ---- + -$(DEL) small.vim + -$(DEL) tiny.vim + -$(DEL) mbyte.vim ++ -$(DEL) mzscheme.vim + -$(DEL) X* + -$(DEL) viminfo + +*** ../vim-7.2.335/src/testdir/Makefile 2009-11-17 17:40:34.000000000 +0100 +--- src/testdir/Makefile 2010-01-19 15:29:01.000000000 +0100 +*************** +*** 23,29 **** + test54.out test55.out test56.out test57.out test58.out \ + test59.out test60.out test61.out test62.out test63.out \ + test64.out test65.out test66.out test67.out test68.out \ +! test69.out + + SCRIPTS_GUI = test16.out + +--- 23,29 ---- + test54.out test55.out test56.out test57.out test58.out \ + test59.out test60.out test61.out test62.out test63.out \ + test64.out test65.out test66.out test67.out test68.out \ +! test69.out test70.out + + SCRIPTS_GUI = test16.out + +*************** +*** 44,53 **** + $(SCRIPTS) $(SCRIPTS_GUI): $(VIMPROG) + + clean: +! -rm -rf *.out *.failed *.rej *.orig test.log tiny.vim small.vim mbyte.vim test.ok X* valgrind.pid* viminfo + + test1.out: test1.in +! -rm -f $*.failed tiny.vim small.vim mbyte.vim test.ok X* viminfo + $(VALGRIND) $(VIMPROG) -u unix.vim -U NONE --noplugin -s dotest.in $*.in + @/bin/sh -c "if diff test.out $*.ok; \ + then mv -f test.out $*.out; \ +--- 44,53 ---- + $(SCRIPTS) $(SCRIPTS_GUI): $(VIMPROG) + + clean: +! -rm -rf *.out *.failed *.rej *.orig test.log tiny.vim small.vim mbyte.vim mzscheme.vim test.ok X* valgrind.pid* viminfo + + test1.out: test1.in +! -rm -f $*.failed tiny.vim small.vim mbyte.vim mzscheme.vim test.ok X* viminfo + $(VALGRIND) $(VIMPROG) -u unix.vim -U NONE --noplugin -s dotest.in $*.in + @/bin/sh -c "if diff test.out $*.ok; \ + then mv -f test.out $*.out; \ +*** ../vim-7.2.335/src/testdir/main.aap 2004-06-13 21:05:31.000000000 +0200 +--- src/testdir/main.aap 2010-01-19 15:29:01.000000000 +0100 +*************** +*** 32,42 **** + $Scripts $ScriptsGUI: $VimProg + + clean: +! :del {r}{force} *.out test.log tiny.vim small.vim mbyte.vim test.ok X* + + # test1 is special, it checks for features + test1.out: test1.in +! :del {force} test1.failed tiny.vim small.vim mbyte.vim + :sys {i} $VimProg -u unix.vim -U NONE --noplugin -s dotest.in test1.in + @if os.system("diff test.out test1.ok") != 0: + :error test1 FAILED - Something basic is wrong +--- 32,42 ---- + $Scripts $ScriptsGUI: $VimProg + + clean: +! :del {r}{force} *.out test.log tiny.vim small.vim mbyte.vim mzscheme.vim test.ok X* + + # test1 is special, it checks for features + test1.out: test1.in +! :del {force} test1.failed tiny.vim small.vim mbyte.vim mzscheme.vim + :sys {i} $VimProg -u unix.vim -U NONE --noplugin -s dotest.in test1.in + @if os.system("diff test.out test1.ok") != 0: + :error test1 FAILED - Something basic is wrong +*** ../vim-7.2.335/src/testdir/test1.in 2004-06-13 20:19:23.000000000 +0200 +--- src/testdir/test1.in 2010-01-19 15:38:44.000000000 +0100 +*************** +*** 13,18 **** +--- 13,19 ---- + + If Vim was not compiled with the +multi_byte feature, the mbyte.vim script will be set like small.vim above. mbyte.vim is sourced by tests that require the + +multi_byte feature. ++ Similar logic is applied to the +mzscheme feature, using mzscheme.vim. + + STARTTEST + :" Write a single line to test.out to check if testing works at all. +*************** +*** 25,32 **** +--- 26,36 ---- + w! test.out + qa! + :w! mbyte.vim ++ :w! mzscheme.vim + :" If +multi_byte feature supported, make mbyte.vim empty. + :if has("multi_byte") | sp another | w! mbyte.vim | q | endif ++ :" If +mzscheme feature supported, make mzscheme.vim empty. ++ :if has("mzscheme") | sp another | w! mzscheme.vim | q | endif + :" If +eval feature supported quit here, leaving tiny.vim and small.vim empty. + :" Otherwise write small.vim to skip the test. + :if 1 | q! | endif +*** ../vim-7.2.335/src/testdir/test70.in 2010-01-19 15:47:24.000000000 +0100 +--- src/testdir/test70.in 2010-01-19 15:29:01.000000000 +0100 +*************** +*** 0 **** +--- 1,53 ---- ++ Smoke test for MzScheme interface and mzeval() function ++ ++ STARTTEST ++ :so mzscheme.vim ++ :set nocompatible viminfo+=nviminfo ++ :function! MzRequire() ++ :redir => l:mzversion ++ :mz (version) ++ :redir END ++ :if strpart(l:mzversion, 1, 1) < "4" ++ :" MzScheme versions < 4.x: ++ :mz (require (prefix vim- vimext)) ++ :else ++ :" newer versions: ++ :mz (require (prefix-in vim- 'vimext)) ++ :mz (require r5rs) ++ :endif ++ :endfunction ++ :silent call MzRequire() ++ :mz (define l '("item0" "dictionary with list OK" "item2")) ++ :mz (define h (make-hash)) ++ :mz (hash-set! h "list" l) ++ /^1 ++ :" change buffer contents ++ :mz (vim-set-buff-line (vim-eval "line('.')") "1 changed line 1") ++ :" scalar test ++ :let tmp_string = mzeval('"string"') ++ :let tmp_1000 = mzeval('1000') ++ :if tmp_string . tmp_1000 == "string1000" ++ :let scalar_res = "OK" ++ :else ++ :let scalar_res = "FAILED" ++ :endif ++ :call append(search("^1"), "scalar test " . scalar_res) ++ :" dictionary containing a list ++ :let tmp = mzeval("h")["list"][1] ++ :/^2/put =tmp ++ :" circular list (at the same time test lists containing lists) ++ :mz (set-car! (cddr l) l) ++ :let l2 = mzeval("h")["list"] ++ :if l2[2] == l2 ++ :let res = "OK" ++ :else ++ :let res = "FAILED" ++ :endif ++ :call setline(search("^3"), "circular test " . res) ++ :?^1?,$w! test.out ++ :qa! ++ ENDTEST ++ ++ 1 line 1 ++ 2 line 2 ++ 3 line 3 +*** ../vim-7.2.335/src/testdir/test70.ok 2010-01-19 15:47:24.000000000 +0100 +--- src/testdir/test70.ok 2010-01-19 15:29:01.000000000 +0100 +*************** +*** 0 **** +--- 1,5 ---- ++ 1 changed line 1 ++ scalar test OK ++ 2 line 2 ++ dictionary with list OK ++ circular test OK +*** ../vim-7.2.335/src/version.c 2010-01-19 15:23:38.000000000 +0100 +--- src/version.c 2010-01-19 15:46:44.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 336, + /**/ + +-- +"Computers in the future may weigh no more than 1.5 tons." + Popular Mechanics, 1949 + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.337 b/source/ap/vim/patches/7.2.337 new file mode 100644 index 000000000..e74528545 --- /dev/null +++ b/source/ap/vim/patches/7.2.337 @@ -0,0 +1,112 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.337 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.337 +Problem: The :compiler command doesn't function properly when invoked in a + function. +Solution: Add "g:" before "current_compiler". (Yukihiro Nakadaira) +Files: src/ex_cmds2.c + + +*** ../vim-7.2.336/src/ex_cmds2.c 2009-05-16 21:16:12.000000000 +0200 +--- src/ex_cmds2.c 2010-01-19 16:02:53.000000000 +0100 +*************** +*** 2496,2509 **** + * To remain backwards compatible "current_compiler" is always + * used. A user's compiler plugin may set it, the distributed + * plugin will then skip the settings. Afterwards set +! * "b:current_compiler" and restore "current_compiler". */ +! old_cur_comp = get_var_value((char_u *)"current_compiler"); + if (old_cur_comp != NULL) + old_cur_comp = vim_strsave(old_cur_comp); + do_cmdline_cmd((char_u *) + "command -nargs=* CompilerSet setlocal <args>"); + } +! do_unlet((char_u *)"current_compiler", TRUE); + do_unlet((char_u *)"b:current_compiler", TRUE); + + sprintf((char *)buf, "compiler/%s.vim", eap->arg); +--- 2496,2510 ---- + * To remain backwards compatible "current_compiler" is always + * used. A user's compiler plugin may set it, the distributed + * plugin will then skip the settings. Afterwards set +! * "b:current_compiler" and restore "current_compiler". +! * Explicitly prepend "g:" to make it work in a function. */ +! old_cur_comp = get_var_value((char_u *)"g:current_compiler"); + if (old_cur_comp != NULL) + old_cur_comp = vim_strsave(old_cur_comp); + do_cmdline_cmd((char_u *) + "command -nargs=* CompilerSet setlocal <args>"); + } +! do_unlet((char_u *)"g:current_compiler", TRUE); + do_unlet((char_u *)"b:current_compiler", TRUE); + + sprintf((char *)buf, "compiler/%s.vim", eap->arg); +*************** +*** 2514,2520 **** + do_cmdline_cmd((char_u *)":delcommand CompilerSet"); + + /* Set "b:current_compiler" from "current_compiler". */ +! p = get_var_value((char_u *)"current_compiler"); + if (p != NULL) + set_internal_string_var((char_u *)"b:current_compiler", p); + +--- 2515,2521 ---- + do_cmdline_cmd((char_u *)":delcommand CompilerSet"); + + /* Set "b:current_compiler" from "current_compiler". */ +! p = get_var_value((char_u *)"g:current_compiler"); + if (p != NULL) + set_internal_string_var((char_u *)"b:current_compiler", p); + +*************** +*** 2523,2534 **** + { + if (old_cur_comp != NULL) + { +! set_internal_string_var((char_u *)"current_compiler", + old_cur_comp); + vim_free(old_cur_comp); + } + else +! do_unlet((char_u *)"current_compiler", TRUE); + } + } + } +--- 2524,2535 ---- + { + if (old_cur_comp != NULL) + { +! set_internal_string_var((char_u *)"g:current_compiler", + old_cur_comp); + vim_free(old_cur_comp); + } + else +! do_unlet((char_u *)"g:current_compiler", TRUE); + } + } + } +*** ../vim-7.2.336/src/version.c 2010-01-19 15:51:29.000000000 +0100 +--- src/version.c 2010-01-19 16:11:20.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 337, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +121. You ask for e-mail adresses instead of telephone numbers. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.338 b/source/ap/vim/patches/7.2.338 new file mode 100644 index 000000000..ac0223f2b --- /dev/null +++ b/source/ap/vim/patches/7.2.338 @@ -0,0 +1,129 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.338 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.338 (after 7.2.300) +Problem: Part of FD_CLOEXEC change is missing. +Solution: Include source file skipped because of typo. +Files: src/ex_cmds2.c + + +*** ../vim-7.2.337/src/ex_cmds2.c 2010-01-19 16:12:53.000000000 +0100 +--- src/ex_cmds2.c 2010-01-19 16:02:53.000000000 +0100 +*************** +*** 2802,2821 **** + + static char_u *get_one_sourceline __ARGS((struct source_cookie *sp)); + +! #if defined(WIN32) && defined(FEAT_CSCOPE) + static FILE *fopen_noinh_readbin __ARGS((char *filename)); + + /* + * Special function to open a file without handle inheritance. + */ + static FILE * + fopen_noinh_readbin(filename) + char *filename; + { +! int fd_tmp = mch_open(filename, O_RDONLY | O_BINARY | O_NOINHERIT, 0); + + if (fd_tmp == -1) + return NULL; + return fdopen(fd_tmp, READBIN); + } + #endif +--- 2802,2836 ---- + + static char_u *get_one_sourceline __ARGS((struct source_cookie *sp)); + +! #if (defined(WIN32) && defined(FEAT_CSCOPE)) || defined(HAVE_FD_CLOEXEC) +! # define USE_FOPEN_NOINH + static FILE *fopen_noinh_readbin __ARGS((char *filename)); + + /* + * Special function to open a file without handle inheritance. ++ * When possible the handle is closed on exec(). + */ + static FILE * + fopen_noinh_readbin(filename) + char *filename; + { +! int fd_tmp = mch_open(filename, O_RDONLY +! # ifdef WIN32 +! O_BINARY | O_NOINHERIT +! # endif +! , 0); + + if (fd_tmp == -1) + return NULL; ++ ++ # ifdef HAVE_FD_CLOEXEC ++ { ++ int fdflags = fcntl(fd_tmp, F_GETFD); ++ if (fdflags >= 0 && (fdflags & FD_CLOEXEC) == 0) ++ fcntl(fd_tmp, F_SETFD, fdflags | FD_CLOEXEC); ++ } ++ # endif ++ + return fdopen(fd_tmp, READBIN); + } + #endif +*************** +*** 2895,2901 **** + apply_autocmds(EVENT_SOURCEPRE, fname_exp, fname_exp, FALSE, curbuf); + #endif + +! #if defined(WIN32) && defined(FEAT_CSCOPE) + cookie.fp = fopen_noinh_readbin((char *)fname_exp); + #else + cookie.fp = mch_fopen((char *)fname_exp, READBIN); +--- 2910,2916 ---- + apply_autocmds(EVENT_SOURCEPRE, fname_exp, fname_exp, FALSE, curbuf); + #endif + +! #ifdef USE_FOPEN_NOINH + cookie.fp = fopen_noinh_readbin((char *)fname_exp); + #else + cookie.fp = mch_fopen((char *)fname_exp, READBIN); +*************** +*** 2916,2922 **** + *p = '.'; + else + *p = '_'; +! #if defined(WIN32) && defined(FEAT_CSCOPE) + cookie.fp = fopen_noinh_readbin((char *)fname_exp); + #else + cookie.fp = mch_fopen((char *)fname_exp, READBIN); +--- 2931,2937 ---- + *p = '.'; + else + *p = '_'; +! #ifdef USE_FOPEN_NOINH + cookie.fp = fopen_noinh_readbin((char *)fname_exp); + #else + cookie.fp = mch_fopen((char *)fname_exp, READBIN); +*** ../vim-7.2.337/src/version.c 2010-01-19 16:12:53.000000000 +0100 +--- src/version.c 2010-01-19 16:20:08.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 338, + /**/ + +-- +~ +~ +~ +".signature" 4 lines, 50 characters written + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.339 b/source/ap/vim/patches/7.2.339 new file mode 100644 index 000000000..77aa94db9 --- /dev/null +++ b/source/ap/vim/patches/7.2.339 @@ -0,0 +1,78 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.339 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.339 (after 7.2.269) +Problem: Part of --startuptime patch is missing. +Solution: Add check for time_fd. +Files: src/ex_cmds2.c + + +*** ../vim-7.2.338/src/ex_cmds2.c 2010-01-19 16:21:55.000000000 +0100 +--- src/ex_cmds2.c 2010-01-19 16:02:53.000000000 +0100 +*************** +*** 3036,3042 **** + #endif + + #ifdef STARTUPTIME +! time_push(&tv_rel, &tv_start); + #endif + + #ifdef FEAT_EVAL +--- 3036,3043 ---- + #endif + + #ifdef STARTUPTIME +! if (time_fd != NULL) +! time_push(&tv_rel, &tv_start); + #endif + + #ifdef FEAT_EVAL +*************** +*** 3162,3170 **** + verbose_leave(); + } + #ifdef STARTUPTIME +! vim_snprintf((char *)IObuff, IOSIZE, "sourcing %s", fname); +! time_msg((char *)IObuff, &tv_start); +! time_pop(&tv_rel); + #endif + + #ifdef FEAT_EVAL +--- 3163,3174 ---- + verbose_leave(); + } + #ifdef STARTUPTIME +! if (time_fd != NULL) +! { +! vim_snprintf((char *)IObuff, IOSIZE, "sourcing %s", fname); +! time_msg((char *)IObuff, &tv_start); +! time_pop(&tv_rel); +! } + #endif + + #ifdef FEAT_EVAL +*** ../vim-7.2.338/src/version.c 2010-01-19 16:21:55.000000000 +0100 +--- src/version.c 2010-01-19 16:25:39.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 339, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +122. You ask if the Netaholics Anonymous t-shirt you ordered can be + sent to you via e-mail. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.340 b/source/ap/vim/patches/7.2.340 new file mode 100644 index 000000000..b0f4babb6 --- /dev/null +++ b/source/ap/vim/patches/7.2.340 @@ -0,0 +1,54 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.340 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.340 +Problem: Gcc warning for condition that can never be true. (James Vega) +Solution: Use start_lvl instead flp->lvl. +Files: src/fold.c + + +*** ../vim-7.2.339/src/fold.c 2009-11-03 18:04:26.000000000 +0100 +--- src/fold.c 2010-01-19 16:45:13.000000000 +0100 +*************** +*** 3239,3246 **** + flp->lvl = n; + flp->lvl_next = n - 1; + /* never start a fold with an end marker */ +! if (flp->lvl_next > flp->lvl) +! flp->lvl_next = flp->lvl; + } + } + else +--- 3239,3246 ---- + flp->lvl = n; + flp->lvl_next = n - 1; + /* never start a fold with an end marker */ +! if (flp->lvl_next > start_lvl) +! flp->lvl_next = start_lvl; + } + } + else +*** ../vim-7.2.339/src/version.c 2010-01-19 16:31:10.000000000 +0100 +--- src/version.c 2010-01-19 17:23:40.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 340, + /**/ + +-- +Would you care for a drink? I mean, if it were, like, +disabled and you had to look after it? + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.341 b/source/ap/vim/patches/7.2.341 new file mode 100644 index 000000000..67d5e81df --- /dev/null +++ b/source/ap/vim/patches/7.2.341 @@ -0,0 +1,69 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.341 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.341 +Problem: Popup menu wraps to next line when double-wide character doesn't + fit. (Jiang Ma) +Solution: Display a ">" instead. (Dominique Pelle) +Files: src/screen.c + + +*** ../vim-7.2.340/src/screen.c 2009-11-25 13:03:29.000000000 +0100 +--- src/screen.c 2010-01-19 17:34:21.000000000 +0100 +*************** +*** 6434,6439 **** +--- 6434,6446 ---- + else + prev_c = u8c; + # endif ++ if (col + mbyte_cells > screen_Columns) ++ { ++ /* Only 1 cell left, but character requires 2 cells: ++ * display a '>' in the last column to avoid wrapping. */ ++ c = '>'; ++ mbyte_cells = 1; ++ } + } + } + #endif +*************** +*** 9210,9216 **** + int force; + { + /* +! * Don't delete it right now, when not redrawing or insided a mapping. + */ + if (!redrawing() || (!force && char_avail() && !KeyTyped)) + redraw_cmdline = TRUE; /* delete mode later */ +--- 9217,9223 ---- + int force; + { + /* +! * Don't delete it right now, when not redrawing or inside a mapping. + */ + if (!redrawing() || (!force && char_avail() && !KeyTyped)) + redraw_cmdline = TRUE; /* delete mode later */ +*** ../vim-7.2.340/src/version.c 2010-01-19 17:24:20.000000000 +0100 +--- src/version.c 2010-01-19 17:39:56.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 341, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +124. You begin conversations with, "Who is your internet service provider?" + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.342 b/source/ap/vim/patches/7.2.342 new file mode 100644 index 000000000..72bf253e8 --- /dev/null +++ b/source/ap/vim/patches/7.2.342 @@ -0,0 +1,95 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.342 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.342 +Problem: Popup menu displayed wrong in 'rightleft' mode when there are + multi-byte characters. +Solution: Adjust the column computations. (Dominique Pelle) +Files: src/popupmnu.c + + +*** ../vim-7.2.341/src/popupmnu.c 2008-11-15 14:10:23.000000000 +0100 +--- src/popupmnu.c 2010-01-19 17:57:05.000000000 +0100 +*************** +*** 345,365 **** + if (st != NULL) + { + char_u *rt = reverse_text(st); +- char_u *rt_saved = rt; +- int len, j; + + if (rt != NULL) + { +! len = (int)STRLEN(rt); +! if (len > pum_width) + { +! for (j = pum_width; j < len; ++j) + mb_ptr_adv(rt); +! len = pum_width; + } +! screen_puts_len(rt, len, row, +! col - len + 1, attr); +! vim_free(rt_saved); + } + vim_free(st); + } +--- 345,380 ---- + if (st != NULL) + { + char_u *rt = reverse_text(st); + + if (rt != NULL) + { +! char_u *rt_start = rt; +! int size; +! +! size = vim_strsize(rt); +! if (size > pum_width) + { +! do +! { +! size -= has_mbyte +! ? (*mb_ptr2cells)(rt) : 1; + mb_ptr_adv(rt); +! } while (size > pum_width); +! +! if (size < pum_width) +! { +! /* Most left character requires +! * 2-cells but only 1 cell is +! * available on screen. Put a +! * '<' on the left of the pum +! * item */ +! *(--rt) = '<'; +! size++; +! } + } +! screen_puts_len(rt, (int)STRLEN(rt), +! row, col - size + 1, attr); +! vim_free(rt_start); + } + vim_free(st); + } +*** ../vim-7.2.341/src/version.c 2010-01-19 17:40:39.000000000 +0100 +--- src/version.c 2010-01-19 18:03:22.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 342, + /**/ + +-- +I have a watch cat! Just break in and she'll watch. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.343 b/source/ap/vim/patches/7.2.343 new file mode 100644 index 000000000..22031519d --- /dev/null +++ b/source/ap/vim/patches/7.2.343 @@ -0,0 +1,51 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.343 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.343 (after 7.2.338) +Problem: Can't compile on Win32. +Solution: Insert the missing '|'. +Files: src/ex_cmds2.c + + +*** ../vim-7.2.342/src/ex_cmds2.c 2010-01-19 16:31:10.000000000 +0100 +--- src/ex_cmds2.c 2010-01-19 23:22:40.000000000 +0100 +*************** +*** 2816,2822 **** + { + int fd_tmp = mch_open(filename, O_RDONLY + # ifdef WIN32 +! O_BINARY | O_NOINHERIT + # endif + , 0); + +--- 2816,2822 ---- + { + int fd_tmp = mch_open(filename, O_RDONLY + # ifdef WIN32 +! | O_BINARY | O_NOINHERIT + # endif + , 0); + +*** ../vim-7.2.342/src/version.c 2010-01-19 18:05:05.000000000 +0100 +--- src/version.c 2010-01-19 23:24:05.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 343, + /**/ + +-- +I'm writing a book. I've got the page numbers done. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.344 b/source/ap/vim/patches/7.2.344 new file mode 100644 index 000000000..788bbc41c --- /dev/null +++ b/source/ap/vim/patches/7.2.344 @@ -0,0 +1,60 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.344 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.344 (after 7.2.343) +Problem: Can't compile on some systems +Solution: Move the #ifdef outside of the mch_open macro. (Patrick Texier) +Files: src/ex_cmds2.c + + +*** ../vim-7.2.343/src/ex_cmds2.c 2010-01-19 23:25:18.000000000 +0100 +--- src/ex_cmds2.c 2010-01-20 21:38:19.000000000 +0100 +*************** +*** 2814,2824 **** + fopen_noinh_readbin(filename) + char *filename; + { +- int fd_tmp = mch_open(filename, O_RDONLY + # ifdef WIN32 +! | O_BINARY | O_NOINHERIT + # endif +- , 0); + + if (fd_tmp == -1) + return NULL; +--- 2814,2824 ---- + fopen_noinh_readbin(filename) + char *filename; + { + # ifdef WIN32 +! int fd_tmp = mch_open(filename, O_RDONLY | O_BINARY | O_NOINHERIT, 0); +! # else +! int fd_tmp = mch_open(filename, O_RDONLY, 0); + # endif + + if (fd_tmp == -1) + return NULL; +*** ../vim-7.2.343/src/version.c 2010-01-19 23:25:18.000000000 +0100 +--- src/version.c 2010-01-20 21:38:23.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 344, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +128. You can access the Net -- via your portable and cellular phone. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.345 b/source/ap/vim/patches/7.2.345 new file mode 100644 index 000000000..a3b7acf7e --- /dev/null +++ b/source/ap/vim/patches/7.2.345 @@ -0,0 +1,47 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.345 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.345 +Problem: Tab line is not updated when the value of 'bt' is changed. +Solution: Call redraw_titles(). (Lech Lorens) +Files: src/option.c + + +*** ../vim-7.2.344/src/option.c 2009-09-11 15:20:22.000000000 +0200 +--- src/option.c 2010-01-27 15:52:45.000000000 +0100 +*************** +*** 6410,6415 **** +--- 6410,6418 ---- + } + # endif + curbuf->b_help = (curbuf->b_p_bt[0] == 'h'); ++ # ifdef FEAT_TITLE ++ redraw_titles(); ++ # endif + } + } + #endif +*** ../vim-7.2.344/src/version.c 2010-01-20 21:41:40.000000000 +0100 +--- src/version.c 2010-01-27 15:57:06.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 345, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +154. You fondle your mouse. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.346 b/source/ap/vim/patches/7.2.346 new file mode 100644 index 000000000..479aac636 --- /dev/null +++ b/source/ap/vim/patches/7.2.346 @@ -0,0 +1,110 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.346 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.346 +Problem: Repeating a command with @: causes a mapping to be applied twice. +Solution: Do not remap characters inserted in the typeahead buffer. (Kana + Natsuno) +Files: src/ops.c + + +*** ../vim-7.2.345/src/ops.c 2010-01-19 14:59:14.000000000 +0100 +--- src/ops.c 2010-01-19 13:04:46.000000000 +0100 +*************** +*** 1301,1310 **** + } + } + + static int + put_in_typebuf(s, esc, colon, silent) + char_u *s; +! int esc; /* Escape CSI characters */ + int colon; /* add ':' before the line */ + int silent; + { +--- 1301,1316 ---- + } + } + ++ /* ++ * Insert register contents "s" into the typeahead buffer, so that it will be ++ * executed again. ++ * When "esc" is TRUE it is to be taken literally: Escape CSI characters and ++ * no remapping. ++ */ + static int + put_in_typebuf(s, esc, colon, silent) + char_u *s; +! int esc; + int colon; /* add ':' before the line */ + int silent; + { +*************** +*** 1312,1318 **** + + put_reedit_in_typebuf(silent); + if (colon) +! retval = ins_typebuf((char_u *)"\n", REMAP_YES, 0, TRUE, silent); + if (retval == OK) + { + char_u *p; +--- 1318,1324 ---- + + put_reedit_in_typebuf(silent); + if (colon) +! retval = ins_typebuf((char_u *)"\n", REMAP_NONE, 0, TRUE, silent); + if (retval == OK) + { + char_u *p; +*************** +*** 1324,1335 **** + if (p == NULL) + retval = FAIL; + else +! retval = ins_typebuf(p, REMAP_YES, 0, TRUE, silent); + if (esc) + vim_free(p); + } + if (colon && retval == OK) +! retval = ins_typebuf((char_u *)":", REMAP_YES, 0, TRUE, silent); + return retval; + } + +--- 1330,1342 ---- + if (p == NULL) + retval = FAIL; + else +! retval = ins_typebuf(p, esc ? REMAP_NONE : REMAP_YES, +! 0, TRUE, silent); + if (esc) + vim_free(p); + } + if (colon && retval == OK) +! retval = ins_typebuf((char_u *)":", REMAP_NONE, 0, TRUE, silent); + return retval; + } + +*** ../vim-7.2.345/src/version.c 2010-01-27 15:57:17.000000000 +0100 +--- src/version.c 2010-01-27 16:25:55.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 346, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +155. You forget to eat because you're too busy surfing the net. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.347 b/source/ap/vim/patches/7.2.347 new file mode 100644 index 000000000..e5fa17d48 --- /dev/null +++ b/source/ap/vim/patches/7.2.347 @@ -0,0 +1,138 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.347 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.347 +Problem: Crash when executing <expr> mapping redefines that same mapping. +Solution: Save the values used before evaluating the expression. +Files: src/getchar.c + + +*** ../vim-7.2.346/src/getchar.c 2009-11-11 16:23:37.000000000 +0100 +--- src/getchar.c 2010-01-27 17:30:42.000000000 +0100 +*************** +*** 2389,2394 **** +--- 2389,2405 ---- + /* complete match */ + if (keylen >= 0 && keylen <= typebuf.tb_len) + { ++ #ifdef FEAT_EVAL ++ int save_m_expr; ++ int save_m_noremap; ++ int save_m_silent; ++ char_u *save_m_keys; ++ char_u *save_m_str; ++ #else ++ # define save_m_noremap mp->m_noremap ++ # define save_m_silent mp->m_silent ++ #endif ++ + /* write chars to script file(s) */ + if (keylen > typebuf.tb_maplen) + gotchars(typebuf.tb_buf + typebuf.tb_off +*************** +*** 2431,2436 **** +--- 2442,2457 ---- + #endif + + #ifdef FEAT_EVAL ++ /* Copy the values from *mp that are used, because ++ * evaluating the expression may invoke a function ++ * that redefines the mapping, thereby making *mp ++ * invalid. */ ++ save_m_expr = mp->m_expr; ++ save_m_noremap = mp->m_noremap; ++ save_m_silent = mp->m_silent; ++ save_m_keys = NULL; /* only saved when needed */ ++ save_m_str = NULL; /* only saved when needed */ ++ + /* + * Handle ":map <expr>": evaluate the {rhs} as an + * expression. Save and restore the typeahead so that +*************** +*** 2446,2452 **** + if (tabuf.typebuf_valid) + { + vgetc_busy = 0; +! s = eval_map_expr(mp->m_str, NUL); + vgetc_busy = save_vgetc_busy; + } + else +--- 2467,2475 ---- + if (tabuf.typebuf_valid) + { + vgetc_busy = 0; +! save_m_keys = vim_strsave(mp->m_keys); +! save_m_str = vim_strsave(mp->m_str); +! s = eval_map_expr(save_m_str, NUL); + vgetc_busy = save_vgetc_busy; + } + else +*************** +*** 2470,2486 **** + else + { + i = ins_typebuf(s, +! mp->m_noremap != REMAP_YES +! ? mp->m_noremap +! : STRNCMP(s, mp->m_keys, + (size_t)keylen) != 0 + ? REMAP_YES : REMAP_SKIP, +! 0, TRUE, cmd_silent || mp->m_silent); + #ifdef FEAT_EVAL +! if (mp->m_expr) + vim_free(s); + #endif + } + if (i == FAIL) + { + c = -1; +--- 2493,2517 ---- + else + { + i = ins_typebuf(s, +! save_m_noremap != REMAP_YES +! ? save_m_noremap +! : STRNCMP(s, +! #ifdef FEAT_EVAL +! save_m_keys != NULL ? save_m_keys : +! #endif +! mp->m_keys, + (size_t)keylen) != 0 + ? REMAP_YES : REMAP_SKIP, +! 0, TRUE, cmd_silent || save_m_silent); + #ifdef FEAT_EVAL +! if (save_m_expr) + vim_free(s); + #endif + } ++ #ifdef FEAT_EVAL ++ vim_free(save_m_keys); ++ vim_free(save_m_str); ++ #endif + if (i == FAIL) + { + c = -1; +*** ../vim-7.2.346/src/version.c 2010-01-27 16:31:00.000000000 +0100 +--- src/version.c 2010-01-27 17:27:32.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 347, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +156. You forget your friend's name but not her e-mail address. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.348 b/source/ap/vim/patches/7.2.348 new file mode 100644 index 000000000..5f4ffbd03 --- /dev/null +++ b/source/ap/vim/patches/7.2.348 @@ -0,0 +1,254 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.348 (after 7.2.330) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.348 (after 7.2.330) +Problem: Unicode double-width characters are not up-to date. +Solution: Produce the double-width table like the others. +Files: runtime/tools/unicode.vim, src/mbyte.c + + +*** ../vim-7.2.347/runtime/tools/unicode.vim 2010-01-12 19:48:57.000000000 +0100 +--- runtime/tools/unicode.vim 2010-01-27 17:57:17.000000000 +0100 +*************** +*** 187,202 **** + wincmd p + endfunc + +! " Build the ambiguous table in a new buffer. + " Uses s:widthprops and s:dataprops. +! func! BuildAmbiguousTable() + let start = -1 + let end = -1 + let ranges = [] + let dataidx = 0 + for p in s:widthprops +! if p[1][0] == 'A' +! let n = ('0x' . p[0]) + 0 + " Find this char in the data table. + while 1 + let dn = ('0x' . s:dataprops[dataidx][0]) + 0 +--- 187,213 ---- + wincmd p + endfunc + +! " Build the double width or ambiguous width table in a new buffer. + " Uses s:widthprops and s:dataprops. +! func! BuildWidthTable(pattern, tableName) + let start = -1 + let end = -1 + let ranges = [] + let dataidx = 0 + for p in s:widthprops +! if p[1][0] =~ a:pattern +! if p[0] =~ '\.\.' +! " It is a range. we don't check for composing char then. +! let rng = split(p[0], '\.\.') +! if len(rng) != 2 +! echoerr "Cannot parse range: '" . p[0] . "' in width table" +! endif +! let n = ('0x' . rng[0]) + 0 +! let n_last = ('0x' . rng[1]) + 0 +! else +! let n = ('0x' . p[0]) + 0 +! let n_last = n +! endif + " Find this char in the data table. + while 1 + let dn = ('0x' . s:dataprops[dataidx][0]) + 0 +*************** +*** 205,231 **** + endif + let dataidx += 1 + endwhile +! if dn != n + echoerr "Cannot find character " . n . " in data table" + endif + " Only use the char when it's not a composing char. + let dp = s:dataprops[dataidx] +! if dp[2] != 'Mn' && dp[2] != 'Mc' && dp[2] != 'Me' + if start >= 0 && end + 1 == n + " continue with same range. +- let end = n + else + if start >= 0 + " produce previous range + call add(ranges, printf("\t{0x%04x, 0x%04x},", start, end)) + endif + let start = n +- if p[0] =~ '\.\.' +- let end = ('0x' . substitute(p[0], '.*\.\.', '', '')) + 0 +- else +- let end = n +- endif + endif + endif + endif + endfor +--- 216,238 ---- + endif + let dataidx += 1 + endwhile +! if dn != n && n_last == n + echoerr "Cannot find character " . n . " in data table" + endif + " Only use the char when it's not a composing char. ++ " But use all chars from a range. + let dp = s:dataprops[dataidx] +! if n_last > n || (dp[2] != 'Mn' && dp[2] != 'Mc' && dp[2] != 'Me') + if start >= 0 && end + 1 == n + " continue with same range. + else + if start >= 0 + " produce previous range + call add(ranges, printf("\t{0x%04x, 0x%04x},", start, end)) + endif + let start = n + endif ++ let end = n_last + endif + endif + endfor +*************** +*** 235,242 **** + + " New buffer to put the result in. + new +! file ambiguous +! call setline(1, " static struct interval ambiguous[] =") + call setline(2, " {") + call append('$', ranges) + call setline('$', getline('$')[:-2]) " remove last comma +--- 242,249 ---- + + " New buffer to put the result in. + new +! exe "file " . a:tableName +! call setline(1, " static struct interval " . a:tableName . "[] =") + call setline(2, " {") + call append('$', ranges) + call setline('$', getline('$')[:-2]) " remove last comma +*************** +*** 276,280 **** + " Parse each line, create a list of lists. + call ParseWidthProps() + +! " Build the ambiguous table. +! call BuildAmbiguousTable() +--- 283,290 ---- + " Parse each line, create a list of lists. + call ParseWidthProps() + +! " Build the double width table. +! call BuildWidthTable('[WF]', 'doublewidth') +! +! " Build the ambiguous width table. +! call BuildWidthTable('A', 'ambiguous') +*** ../vim-7.2.347/src/mbyte.c 2010-01-12 19:48:57.000000000 +0100 +--- src/mbyte.c 2010-01-27 18:06:35.000000000 +0100 +*************** +*** 1200,1205 **** +--- 1200,1248 ---- + utf_char2cells(c) + int c; + { ++ /* Sorted list of non-overlapping intervals of East Asian double width ++ * characters, generated with ../runtime/tools/unicode.vim. */ ++ static struct interval doublewidth[] = ++ { ++ {0x1100, 0x115f}, ++ {0x11a3, 0x11a7}, ++ {0x11fa, 0x11ff}, ++ {0x2329, 0x232a}, ++ {0x2e80, 0x2e99}, ++ {0x2e9b, 0x2ef3}, ++ {0x2f00, 0x2fd5}, ++ {0x2ff0, 0x2ffb}, ++ {0x3000, 0x3029}, ++ {0x3030, 0x303e}, ++ {0x3041, 0x3096}, ++ {0x309b, 0x30ff}, ++ {0x3105, 0x312d}, ++ {0x3131, 0x318e}, ++ {0x3190, 0x31b7}, ++ {0x31c0, 0x31e3}, ++ {0x31f0, 0x321e}, ++ {0x3220, 0x3247}, ++ {0x3250, 0x32fe}, ++ {0x3300, 0x4dbf}, ++ {0x4e00, 0xa48c}, ++ {0xa490, 0xa4c6}, ++ {0xa960, 0xa97c}, ++ {0xac00, 0xd7a3}, ++ {0xd7b0, 0xd7c6}, ++ {0xd7cb, 0xd7fb}, ++ {0xf900, 0xfaff}, ++ {0xfe10, 0xfe19}, ++ {0xfe30, 0xfe52}, ++ {0xfe54, 0xfe66}, ++ {0xfe68, 0xfe6b}, ++ {0xff01, 0xff60}, ++ {0xffe0, 0xffe6}, ++ {0x1f200, 0x1f200}, ++ {0x1f210, 0x1f231}, ++ {0x1f240, 0x1f248}, ++ {0x20000, 0x2fffd}, ++ {0x30000, 0x3fffd} ++ }; + /* Sorted list of non-overlapping intervals of East Asian Ambiguous + * characters, generated with ../runtime/tools/unicode.vim. */ + static struct interval ambiguous[] = +*************** +*** 1403,1422 **** + #else + if (!utf_printable(c)) + return 6; /* unprintable, displays <xxxx> */ +! if (c >= 0x1100 +! && (c <= 0x115f /* Hangul Jamo */ +! || c == 0x2329 +! || c == 0x232a +! || (c >= 0x2e80 && c <= 0xa4cf +! && c != 0x303f) /* CJK ... Yi */ +! || (c >= 0xac00 && c <= 0xd7a3) /* Hangul Syllables */ +! || (c >= 0xf900 && c <= 0xfaff) /* CJK Compatibility +! Ideographs */ +! || (c >= 0xfe30 && c <= 0xfe6f) /* CJK Compatibility Forms */ +! || (c >= 0xff00 && c <= 0xff60) /* Fullwidth Forms */ +! || (c >= 0xffe0 && c <= 0xffe6) +! || (c >= 0x20000 && c <= 0x2fffd) +! || (c >= 0x30000 && c <= 0x3fffd))) + return 2; + #endif + } +--- 1446,1452 ---- + #else + if (!utf_printable(c)) + return 6; /* unprintable, displays <xxxx> */ +! if (intable(doublewidth, sizeof(doublewidth), c)) + return 2; + #endif + } +*** ../vim-7.2.347/src/version.c 2010-01-27 17:31:38.000000000 +0100 +--- src/version.c 2010-01-27 18:25:50.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 348, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +157. You fum through a magazine, you first check to see if it has a web + address. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.349 b/source/ap/vim/patches/7.2.349 new file mode 100644 index 000000000..7d0be0204 --- /dev/null +++ b/source/ap/vim/patches/7.2.349 @@ -0,0 +1,53 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.349 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.349 +Problem: CTRL-W gf doesn't put the new tab in the same place as "tab split" + and "gf". (Tony Mechelynck) +Solution: Store the tab number in cmdmod.tab. +Files: src/window.c + + +*** ../vim-7.2.348/src/window.c 2009-06-24 17:31:27.000000000 +0200 +--- src/window.c 2010-01-27 20:23:22.000000000 +0100 +*************** +*** 626,632 **** + #ifdef FEAT_SEARCHPATH + case 'f': /* CTRL-W gf: "gf" in a new tab page */ + case 'F': /* CTRL-W gF: "gF" in a new tab page */ +! cmdmod.tab = TRUE; + nchar = xchar; + goto wingotofile; + #endif +--- 626,632 ---- + #ifdef FEAT_SEARCHPATH + case 'f': /* CTRL-W gf: "gf" in a new tab page */ + case 'F': /* CTRL-W gF: "gF" in a new tab page */ +! cmdmod.tab = tabpage_index(curtab) + 1; + nchar = xchar; + goto wingotofile; + #endif +*** ../vim-7.2.348/src/version.c 2010-01-27 18:29:21.000000000 +0100 +--- src/version.c 2010-01-27 20:25:43.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 349, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +159. You get excited whenever discussing your hard drive. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.350 b/source/ap/vim/patches/7.2.350 new file mode 100644 index 000000000..7715eb30a --- /dev/null +++ b/source/ap/vim/patches/7.2.350 @@ -0,0 +1,86 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.350 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.350 +Problem: Win32: When changing font the window may jump from the secondary + to the primary screen. (Michael Wookey) +Solution: When the screen position was negative don't correct it to zero. +Files: src/gui.c + + +*** ../vim-7.2.349/src/gui.c 2009-09-23 18:14:13.000000000 +0200 +--- src/gui.c 2010-01-27 21:02:32.000000000 +0100 +*************** +*** 1390,1395 **** +--- 1390,1396 ---- + int un_maximize = mustset; + int did_adjust = 0; + #endif ++ int x = -1, y = -1; + + if (!gui.shell_created) + return; +*************** +*** 1406,1411 **** +--- 1407,1416 ---- + + base_width = gui_get_base_width(); + base_height = gui_get_base_height(); ++ if (fit_to_display) ++ /* Remember the original window position. */ ++ gui_mch_get_winpos(&x, &y); ++ + #ifdef USE_SUN_WORKSHOP + if (!mustset && usingSunWorkShop + && workshop_get_width_height(&width, &height)) +*************** +*** 1473,1483 **** + + gui_mch_set_shellsize(width, height, min_width, min_height, + base_width, base_height, direction); +- if (fit_to_display) +- { +- int x, y; + +! /* Some window managers put the Vim window left of/above the screen. */ + gui_mch_update(); + if (gui_mch_get_winpos(&x, &y) == OK && (x < 0 || y < 0)) + gui_mch_set_winpos(x < 0 ? 0 : x, y < 0 ? 0 : y); +--- 1478,1489 ---- + + gui_mch_set_shellsize(width, height, min_width, min_height, + base_width, base_height, direction); + +! if (fit_to_display && x >= 0 && y >= 0) +! { +! /* Some window managers put the Vim window left of/above the screen. +! * Only change the position if it wasn't already negative before +! * (happens on MS-Windows with a secondary monitor). */ + gui_mch_update(); + if (gui_mch_get_winpos(&x, &y) == OK && (x < 0 || y < 0)) + gui_mch_set_winpos(x < 0 ? 0 : x, y < 0 ? 0 : y); +*** ../vim-7.2.349/src/version.c 2010-01-27 20:26:41.000000000 +0100 +--- src/version.c 2010-01-27 21:03:41.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 350, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +160. You get in the elevator and double-click the button for the floor + you want. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.351 b/source/ap/vim/patches/7.2.351 new file mode 100644 index 000000000..55b28f6aa --- /dev/null +++ b/source/ap/vim/patches/7.2.351 @@ -0,0 +1,78 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.351 (after 7.2.347) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.351 (after 7.2.347) +Problem: Can't build with some compilers. +Solution: Move the #ifdef outside of a macro. Cleanup the code. +Files: src/getchar.c + + +*** ../vim-7.2.350/src/getchar.c 2010-01-27 17:31:38.000000000 +0100 +--- src/getchar.c 2010-01-28 22:42:22.000000000 +0100 +*************** +*** 2492,2508 **** + i = FAIL; + else + { +! i = ins_typebuf(s, +! save_m_noremap != REMAP_YES +! ? save_m_noremap +! : STRNCMP(s, + #ifdef FEAT_EVAL +! save_m_keys != NULL ? save_m_keys : + #endif +! mp->m_keys, +! (size_t)keylen) != 0 +! ? REMAP_YES : REMAP_SKIP, +! 0, TRUE, cmd_silent || save_m_silent); + #ifdef FEAT_EVAL + if (save_m_expr) + vim_free(s); +--- 2492,2515 ---- + i = FAIL; + else + { +! int noremap; +! +! if (save_m_noremap != REMAP_YES) +! noremap = save_m_noremap; +! else if ( + #ifdef FEAT_EVAL +! STRNCMP(s, save_m_keys != NULL +! ? save_m_keys : mp->m_keys, +! (size_t)keylen) +! #else +! STRNCMP(s, mp->m_keys, (size_t)keylen) + #endif +! != 0) +! noremap = REMAP_YES; +! else +! noremap = REMAP_SKIP; +! i = ins_typebuf(s, noremap, +! 0, TRUE, cmd_silent || save_m_silent); + #ifdef FEAT_EVAL + if (save_m_expr) + vim_free(s); +*** ../vim-7.2.350/src/version.c 2010-01-27 21:04:58.000000000 +0100 +--- src/version.c 2010-01-28 22:50:53.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 351, + /**/ + +-- +"Hit any key to continue" it said, but nothing happened after F sharp. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.352 b/source/ap/vim/patches/7.2.352 new file mode 100644 index 000000000..d2e22f2db --- /dev/null +++ b/source/ap/vim/patches/7.2.352 @@ -0,0 +1,62 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.352 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.352 +Problem: Win64: Vim doesn't work when cross-compiled with MingW libraries. +Solution: Always return TRUE for the WM_NCCREATE message. (Andy Kittner) +Files: src/gui_w48.c + + +*** ../vim-7.2.351/src/gui_w48.c 2009-01-28 21:22:20.000000000 +0100 +--- src/gui_w48.c 2010-02-03 12:07:11.000000000 +0100 +*************** +*** 1084,1092 **** + case WM_NOTIFY: Handle_WM_Notify(hwnd, (LPNMHDR)lParam); + return TRUE; + #endif + +! default: +! return MyWindowProc(hwnd, uMsg, wParam, lParam); + } + } + +--- 1084,1098 ---- + case WM_NOTIFY: Handle_WM_Notify(hwnd, (LPNMHDR)lParam); + return TRUE; + #endif ++ /* Workaround for the problem that MyWindowProc() returns FALSE on 64 ++ * bit windows when cross-compiled using Mingw libraries. (Andy ++ * Kittner) */ ++ case WM_NCCREATE: ++ MyWindowProc(hwnd, uMsg, wParam, lParam); ++ return TRUE; + +! default: +! return MyWindowProc(hwnd, uMsg, wParam, lParam); + } + } + +*** ../vim-7.2.351/src/version.c 2010-01-28 22:58:10.000000000 +0100 +--- src/version.c 2010-02-03 12:16:30.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 352, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +185. You order fast food over the Internet + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.353 b/source/ap/vim/patches/7.2.353 new file mode 100644 index 000000000..06f9f1719 --- /dev/null +++ b/source/ap/vim/patches/7.2.353 @@ -0,0 +1,173 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.353 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.353 +Problem: No command line completion for ":profile". +Solution: Complete the subcommand and file name. +Files: src/ex_docmd.c, src/ex_cmds2.c, src/ex_getln.c, + src/proto/ex_cmds2.pro, src/vim.h + + +*** ../vim-7.2.352/src/ex_docmd.c 2009-11-03 12:38:50.000000000 +0100 +--- src/ex_docmd.c 2010-02-03 14:40:14.000000000 +0100 +*************** +*** 3804,3809 **** +--- 3804,3814 ---- + xp->xp_context = EXPAND_NOTHING; + break; + #endif ++ #if defined(FEAT_PROFILE) ++ case CMD_profile: ++ set_context_in_profile_cmd(xp, arg); ++ break; ++ #endif + + #endif /* FEAT_CMDL_COMPL */ + +*** ../vim-7.2.352/src/ex_cmds2.c 2010-01-20 21:41:40.000000000 +0100 +--- src/ex_cmds2.c 2010-02-03 14:50:08.000000000 +0100 +*************** +*** 1115,1120 **** +--- 1115,1193 ---- + } + } + ++ /* Command line expansion for :profile. */ ++ static enum ++ { ++ PEXP_SUBCMD, /* expand :profile sub-commands */ ++ PEXP_FUNC, /* expand :profile func {funcname} */ ++ } pexpand_what; ++ ++ static char *pexpand_cmds[] = { ++ "start", ++ #define PROFCMD_START 0 ++ "pause", ++ #define PROFCMD_PAUSE 1 ++ "continue", ++ #define PROFCMD_CONTINUE 2 ++ "func", ++ #define PROFCMD_FUNC 3 ++ "file", ++ #define PROFCMD_FILE 4 ++ NULL ++ #define PROFCMD_LAST 5 ++ }; ++ ++ /* ++ * Function given to ExpandGeneric() to obtain the profile command ++ * specific expansion. ++ */ ++ char_u * ++ get_profile_name(xp, idx) ++ expand_T *xp UNUSED; ++ int idx; ++ { ++ switch (pexpand_what) ++ { ++ case PEXP_SUBCMD: ++ return (char_u *)pexpand_cmds[idx]; ++ /* case PEXP_FUNC: TODO */ ++ default: ++ return NULL; ++ } ++ } ++ ++ /* ++ * Handle command line completion for :profile command. ++ */ ++ void ++ set_context_in_profile_cmd(xp, arg) ++ expand_T *xp; ++ char_u *arg; ++ { ++ char_u *end_subcmd; ++ int len; ++ ++ /* Default: expand subcommands. */ ++ xp->xp_context = EXPAND_PROFILE; ++ pexpand_what = PEXP_SUBCMD; ++ xp->xp_pattern = arg; ++ ++ end_subcmd = skiptowhite(arg); ++ if (*end_subcmd == NUL) ++ return; ++ ++ len = end_subcmd - arg; ++ if (len == 5 && STRNCMP(arg, "start", 5) == 0) ++ { ++ xp->xp_context = EXPAND_FILES; ++ xp->xp_pattern = skipwhite(end_subcmd); ++ return; ++ } ++ ++ /* TODO: expand function names after "func" */ ++ xp->xp_context = EXPAND_NOTHING; ++ } ++ + /* + * Dump the profiling info. + */ +*** ../vim-7.2.352/src/ex_getln.c 2010-01-19 14:59:14.000000000 +0100 +--- src/ex_getln.c 2010-02-03 14:38:43.000000000 +0100 +*************** +*** 4522,4527 **** +--- 4522,4530 ---- + #ifdef FEAT_SIGNS + {EXPAND_SIGN, get_sign_name, TRUE}, + #endif ++ #ifdef FEAT_PROFILE ++ {EXPAND_PROFILE, get_profile_name, TRUE}, ++ #endif + #if (defined(HAVE_LOCALE_H) || defined(X_LOCALE)) \ + && (defined(FEAT_GETTEXT) || defined(FEAT_MBYTE)) + {EXPAND_LANGUAGE, get_lang_arg, TRUE}, +*** ../vim-7.2.352/src/proto/ex_cmds2.pro 2008-01-06 20:07:25.000000000 +0100 +--- src/proto/ex_cmds2.pro 2010-02-03 14:43:12.000000000 +0100 +*************** +*** 24,29 **** +--- 24,31 ---- + int profile_equal __ARGS((proftime_T *tm1, proftime_T *tm2)); + int profile_cmp __ARGS((proftime_T *tm1, proftime_T *tm2)); + void ex_profile __ARGS((exarg_T *eap)); ++ char_u *get_profile_name __ARGS((expand_T *xp, int idx)); ++ void set_context_in_profile_cmd __ARGS((expand_T *xp, char_u *arg)); + void profile_dump __ARGS((void)); + void script_prof_save __ARGS((proftime_T *tm)); + void script_prof_restore __ARGS((proftime_T *tm)); +*** ../vim-7.2.352/src/vim.h 2009-06-16 11:08:13.000000000 +0200 +--- src/vim.h 2010-02-03 14:40:42.000000000 +0100 +*************** +*** 718,723 **** +--- 718,724 ---- + #define EXPAND_SHELLCMD 32 + #define EXPAND_CSCOPE 33 + #define EXPAND_SIGN 34 ++ #define EXPAND_PROFILE 35 + + /* Values for exmode_active (0 is no exmode) */ + #define EXMODE_NORMAL 1 +*** ../vim-7.2.352/src/version.c 2010-02-03 12:23:16.000000000 +0100 +--- src/version.c 2010-02-03 15:07:26.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 353, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +188. You purchase a laptop so you can surf while sitting on the can. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.354 b/source/ap/vim/patches/7.2.354 new file mode 100644 index 000000000..b4f506646 --- /dev/null +++ b/source/ap/vim/patches/7.2.354 @@ -0,0 +1,78 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.354 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.354 +Problem: Japanese single-width double-byte characters not handled correctly. +Solution: Put 0x8e in ScreenLines[] and the second byte in ScreenLines2[]. + (partly by Kikuchan) +Files: src/screen.c + + +*** ../vim-7.2.353/src/screen.c 2010-01-19 17:40:39.000000000 +0100 +--- src/screen.c 2010-02-03 15:47:19.000000000 +0100 +*************** +*** 2335,2347 **** + if (cells > 1) + ScreenLines[idx + 1] = 0; + } +! else if (cells > 1) /* double-byte character */ +! { +! if (enc_dbcs == DBCS_JPNU && *p == 0x8e) +! ScreenLines2[idx] = p[1]; +! else +! ScreenLines[idx + 1] = p[1]; +! } + col += cells; + idx += cells; + p += c_len; +--- 2335,2346 ---- + if (cells > 1) + ScreenLines[idx + 1] = 0; + } +! else if (enc_dbcs == DBCS_JPNU && *p == 0x8e) +! /* double-byte single width character */ +! ScreenLines2[idx] = p[1]; +! else if (cells > 1) +! /* double-width character */ +! ScreenLines[idx + 1] = p[1]; + col += cells; + idx += cells; + p += c_len; +*************** +*** 4631,4637 **** +--- 4630,4640 ---- + ScreenLines[off] = c; + #ifdef FEAT_MBYTE + if (enc_dbcs == DBCS_JPNU) ++ { ++ if ((mb_c & 0xff00) == 0x8e00) ++ ScreenLines[off] = 0x8e; + ScreenLines2[off] = mb_c & 0xff; ++ } + else if (enc_utf8) + { + if (mb_utf8) +*** ../vim-7.2.353/src/version.c 2010-02-03 15:14:15.000000000 +0100 +--- src/version.c 2010-02-03 15:43:43.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 354, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +189. You put your e-mail address in the upper left-hand corner of envelopes. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.355 b/source/ap/vim/patches/7.2.355 new file mode 100644 index 000000000..b23d44ae5 --- /dev/null +++ b/source/ap/vim/patches/7.2.355 @@ -0,0 +1,88 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.355 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.355 +Problem: Computing the cursor column in validate_cursor_col() is wrong when + line numbers are used and 'n' is not in 'cpoptions', causing the + popup menu to be positioned wrong. +Solution: Correctly use the offset. (partly by Dominique Pelle) +Files: src/move.c + + +*** ../vim-7.2.354/src/move.c 2009-11-03 16:22:59.000000000 +0100 +--- src/move.c 2010-02-03 17:15:16.000000000 +0100 +*************** +*** 889,894 **** +--- 889,895 ---- + { + colnr_T off; + colnr_T col; ++ int width; + + validate_virtcol(); + if (!(curwin->w_valid & VALID_WCOL)) +*************** +*** 896,910 **** + col = curwin->w_virtcol; + off = curwin_col_off(); + col += off; + + /* long line wrapping, adjust curwin->w_wrow */ + if (curwin->w_p_wrap + && col >= (colnr_T)W_WIDTH(curwin) +! && W_WIDTH(curwin) - off + curwin_col_off2() > 0) +! { +! col -= W_WIDTH(curwin); +! col = col % (W_WIDTH(curwin) - off + curwin_col_off2()); +! } + if (col > (int)curwin->w_leftcol) + col -= curwin->w_leftcol; + else +--- 897,910 ---- + col = curwin->w_virtcol; + off = curwin_col_off(); + col += off; ++ width = W_WIDTH(curwin) - off + curwin_col_off2(); + + /* long line wrapping, adjust curwin->w_wrow */ + if (curwin->w_p_wrap + && col >= (colnr_T)W_WIDTH(curwin) +! && width > 0) +! /* use same formula as what is used in curs_columns() */ +! col -= ((col - W_WIDTH(curwin)) / width + 1) * width; + if (col > (int)curwin->w_leftcol) + col -= curwin->w_leftcol; + else +*************** +*** 1041,1046 **** +--- 1041,1047 ---- + /* long line wrapping, adjust curwin->w_wrow */ + if (curwin->w_wcol >= W_WIDTH(curwin)) + { ++ /* this same formula is used in validate_cursor_col() */ + n = (curwin->w_wcol - W_WIDTH(curwin)) / width + 1; + curwin->w_wcol -= n * width; + curwin->w_wrow += n; +*** ../vim-7.2.354/src/version.c 2010-02-03 15:47:59.000000000 +0100 +--- src/version.c 2010-02-03 17:40:39.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 355, + /**/ + +-- +I'm in shape. Round IS a shape. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.356 b/source/ap/vim/patches/7.2.356 new file mode 100644 index 000000000..51b646cd2 --- /dev/null +++ b/source/ap/vim/patches/7.2.356 @@ -0,0 +1,69 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.356 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.356 +Problem: When 'foldmethod' is changed not all folds are closed as expected. +Solution: In foldUpdate() correct the start position and reset fd_flags when + w_foldinvalid is set. (Lech Lorens) +Files: src/fold.c + + +*** ../vim-7.2.355/src/fold.c 2010-01-19 17:24:20.000000000 +0100 +--- src/fold.c 2010-02-03 18:08:11.000000000 +0100 +*************** +*** 849,859 **** + fold_T *fp; + + /* Mark all folds from top to bot as maybe-small. */ +! (void)foldFind(&curwin->w_folds, curwin->w_cursor.lnum, &fp); + while (fp < (fold_T *)curwin->w_folds.ga_data + curwin->w_folds.ga_len + && fp->fd_top < bot) + { + fp->fd_small = MAYBE; + ++fp; + } + +--- 849,865 ---- + fold_T *fp; + + /* Mark all folds from top to bot as maybe-small. */ +! (void)foldFind(&curwin->w_folds, top, &fp); + while (fp < (fold_T *)curwin->w_folds.ga_data + curwin->w_folds.ga_len + && fp->fd_top < bot) + { + fp->fd_small = MAYBE; ++ ++ /* Not sure if this is the right place to reset fd_flags (suggested by ++ * Lech Lorens). */ ++ if (wp->w_foldinvalid) ++ fp->fd_flags = FD_LEVEL; ++ + ++fp; + } + +*** ../vim-7.2.355/src/version.c 2010-02-03 17:42:59.000000000 +0100 +--- src/version.c 2010-02-03 18:12:34.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 356, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +190. You quickly hand over your wallet, leather jacket, and car keys + during a mugging, then proceed to beat the crap out of your + assailant when he asks for your laptop. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.357 b/source/ap/vim/patches/7.2.357 new file mode 100644 index 000000000..e1998a8fc --- /dev/null +++ b/source/ap/vim/patches/7.2.357 @@ -0,0 +1,49 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.357 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.357 +Problem: When changing 'fileformat' from/to "mac" and there is a CR in the + text the display is wrong. +Solution: Redraw the text when 'fileformat' is changed. (Ben Schmidt) +Files: src/option.c + + +*** ../vim-7.2.356/src/option.c 2010-01-27 15:57:17.000000000 +0100 +--- src/option.c 2010-02-11 16:57:19.000000000 +0100 +*************** +*** 5867,5872 **** +--- 5867,5876 ---- + #endif + /* update flag in swap file */ + ml_setflags(curbuf); ++ /* Redraw needed when switching to/from "mac": a CR in the text ++ * will be displayed differently. */ ++ if (get_fileformat(curbuf) == EOL_MAC || *oldval == 'm') ++ redraw_curbuf_later(NOT_VALID); + } + } + +*** ../vim-7.2.356/src/version.c 2010-02-03 18:14:41.000000000 +0100 +--- src/version.c 2010-02-11 17:01:36.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 357, + /**/ + +-- +From the classified section of a city newspaper: +Dog for sale: eats anything and is fond of children. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.358 b/source/ap/vim/patches/7.2.358 new file mode 100644 index 000000000..524049d6b --- /dev/null +++ b/source/ap/vim/patches/7.2.358 @@ -0,0 +1,78 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.358 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.358 +Problem: Compiler warnings on VMS. (Zoltan Arpadffy) +Solution: Pass array itself instead its address. Return a value. +Files: src/gui_gtk_x11.c, src/os_unix.c + + +*** ../vim-7.2.357/src/gui_gtk_x11.c 2009-11-03 18:13:36.000000000 +0100 +--- src/gui_gtk_x11.c 2010-02-11 18:00:28.000000000 +0100 +*************** +*** 6190,6196 **** + int pcc[MAX_MCO]; + + /* TODO: use the composing characters */ +! c = utfc_ptr2char_len(p, &pcc, len - (p - s)); + if (c >= 0x10000) /* show chars > 0xffff as ? */ + c = 0xbf; + buf[textlen].byte1 = c >> 8; +--- 6190,6196 ---- + int pcc[MAX_MCO]; + + /* TODO: use the composing characters */ +! c = utfc_ptr2char_len(p, pcc, len - (p - s)); + if (c >= 0x10000) /* show chars > 0xffff as ? */ + c = 0xbf; + buf[textlen].byte1 = c >> 8; +*** ../vim-7.2.357/src/os_unix.c 2009-07-22 13:27:50.000000000 +0200 +--- src/os_unix.c 2010-02-11 18:10:20.000000000 +0100 +*************** +*** 1471,1476 **** +--- 1471,1479 ---- + { + /* This function should not return, it causes exit(). Longjump instead. */ + LONGJMP(lc_jump_env, 1); ++ # ifdef VMS ++ return 0; /* avoid the compiler complains about missing return value */ ++ # endif + } + # endif + +*************** +*** 1490,1495 **** +--- 1493,1501 ---- + + /* This function should not return, it causes exit(). Longjump instead. */ + LONGJMP(x_jump_env, 1); ++ # ifdef VMS ++ return 0; /* avoid the compiler complains about missing return value */ ++ # endif + } + #endif + +*** ../vim-7.2.357/src/version.c 2010-02-11 17:02:04.000000000 +0100 +--- src/version.c 2010-02-11 18:10:45.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 358, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +221. Your wife melts your keyboard in the oven. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.359 b/source/ap/vim/patches/7.2.359 new file mode 100644 index 000000000..eb7ade2aa --- /dev/null +++ b/source/ap/vim/patches/7.2.359 @@ -0,0 +1,68 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.359 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.359 +Problem: Crash when using the Netbeans join command. +Solution: Make sure the ml_flush_line() function is not used recursively. + (Xavier de Gaye) +Files: src/memline.c + + +*** ../vim-7.2.358/src/memline.c 2009-11-17 17:13:03.000000000 +0100 +--- src/memline.c 2010-02-11 18:47:48.000000000 +0100 +*************** +*** 3087,3098 **** +--- 3087,3105 ---- + int start; + int count; + int i; ++ static int entered = FALSE; + + if (buf->b_ml.ml_line_lnum == 0 || buf->b_ml.ml_mfp == NULL) + return; /* nothing to do */ + + if (buf->b_ml.ml_flags & ML_LINE_DIRTY) + { ++ /* This code doesn't work recursively, but Netbeans may call back here ++ * when obtaining the cursor position. */ ++ if (entered) ++ return; ++ entered = TRUE; ++ + lnum = buf->b_ml.ml_line_lnum; + new_line = buf->b_ml.ml_line_ptr; + +*************** +*** 3160,3165 **** +--- 3167,3174 ---- + } + } + vim_free(new_line); ++ ++ entered = FALSE; + } + + buf->b_ml.ml_line_lnum = 0; +*** ../vim-7.2.358/src/version.c 2010-02-11 18:19:32.000000000 +0100 +--- src/version.c 2010-02-11 18:53:55.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 359, + /**/ + +-- +Your fault: core dumped + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.360 b/source/ap/vim/patches/7.2.360 new file mode 100644 index 000000000..7cf46205f --- /dev/null +++ b/source/ap/vim/patches/7.2.360 @@ -0,0 +1,96 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.360 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.360 +Problem: Ruby on MS-Windows: can't use sockets. +Solution: Call NtInitialize() during initialization. (Ariya Mizutani) +Files: src/if_ruby.c + + +*** ../vim-7.2.359/src/if_ruby.c 2009-05-22 18:20:23.000000000 +0200 +--- src/if_ruby.c 2010-02-17 15:04:00.000000000 +0100 +*************** +*** 48,53 **** +--- 48,58 ---- + # endif + #endif + ++ /* suggested by Ariya Mizutani */ ++ #if (_MSC_VER == 1200) ++ # undef _WIN32_WINNT ++ #endif ++ + #include <ruby.h> + + #undef EXTERN +*************** +*** 132,137 **** +--- 137,143 ---- + #define ruby_errinfo (*dll_ruby_errinfo) + #define ruby_init dll_ruby_init + #define ruby_init_loadpath dll_ruby_init_loadpath ++ #define NtInitialize dll_NtInitialize + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + # define rb_w32_snprintf dll_rb_w32_snprintf + #endif +*************** +*** 186,191 **** +--- 192,198 ---- + static VALUE *dll_ruby_errinfo; + static void (*dll_ruby_init) (void); + static void (*dll_ruby_init_loadpath) (void); ++ static void (*dll_NtInitialize) (int*, char***); + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + static int (*dll_rb_w32_snprintf)(char*, size_t, const char*, ...); + #endif +*************** +*** 248,253 **** +--- 255,261 ---- + {"ruby_errinfo", (RUBY_PROC*)&dll_ruby_errinfo}, + {"ruby_init", (RUBY_PROC*)&dll_ruby_init}, + {"ruby_init_loadpath", (RUBY_PROC*)&dll_ruby_init_loadpath}, ++ {"NtInitialize", (RUBY_PROC*)&dll_NtInitialize}, + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + {"rb_w32_snprintf", (RUBY_PROC*)&dll_rb_w32_snprintf}, + #endif +*************** +*** 414,419 **** +--- 422,433 ---- + if (ruby_enabled(TRUE)) + { + #endif ++ #ifdef _WIN32 ++ /* suggested by Ariya Mizutani */ ++ int argc = 1; ++ char *argv[] = {"gvim.exe"}; ++ NtInitialize(&argc, &argv); ++ #endif + ruby_init(); + ruby_init_loadpath(); + ruby_io_init(); +*** ../vim-7.2.359/src/version.c 2010-02-11 18:54:38.000000000 +0100 +--- src/version.c 2010-02-17 15:10:22.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 360, + /**/ + +-- +"After a few years of marriage a man can look right at a woman +without seeing her and a woman can see right through a man +without looking at him." + - Helen Rowland + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.361 b/source/ap/vim/patches/7.2.361 new file mode 100644 index 000000000..ddc585795 --- /dev/null +++ b/source/ap/vim/patches/7.2.361 @@ -0,0 +1,763 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.361 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.361 +Problem: Ruby 1.9 is not supported. +Solution: Add Ruby 1.9 support. (Msaki Suketa) +Files: src/Makefile, src/auto/configure, src/configure.in, src/if_ruby.c + + +*** ../vim-7.2.360/src/Makefile 2010-02-17 15:12:22.000000000 +0100 +--- src/Makefile 2010-02-17 16:21:01.000000000 +0100 +*************** +*** 395,401 **** + + # RUBY + # Uncomment this when you want to include the Ruby interface. +! #CONF_OPT_RUBY = --enable-rubyinterp + + # MZSCHEME + # Uncomment this when you want to include the MzScheme interface. +--- 395,403 ---- + + # RUBY + # Uncomment this when you want to include the Ruby interface. +! # Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). +! # CONF_OPT_RUBY = --enable-rubyinterp +! # CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 + + # MZSCHEME + # Uncomment this when you want to include the MzScheme interface. +*** ../vim-7.2.360/src/auto/configure 2009-12-16 17:14:08.000000000 +0100 +--- src/auto/configure 2010-02-17 16:08:59.000000000 +0100 +*************** +*** 793,798 **** +--- 793,799 ---- + enable_tclinterp + with_tclsh + enable_rubyinterp ++ with_ruby_command + enable_cscope + enable_workshop + enable_netbeans +*************** +*** 1503,1508 **** +--- 1504,1510 ---- + --with-plthome=PLTHOME Use PLTHOME. + --with-python-config-dir=PATH Python's config directory + --with-tclsh=PATH which tclsh to use (default: tclsh8.0) ++ --with-ruby-command=RUBY name of the Ruby command (default: ruby) + --with-x use the X Window System + --with-gtk-prefix=PFX Prefix where GTK is installed (optional) + --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional) +*************** +*** 5703,5711 **** + { $as_echo "$as_me:$LINENO: result: $enable_rubyinterp" >&5 + $as_echo "$enable_rubyinterp" >&6; } + if test "$enable_rubyinterp" = "yes"; then + +! # Extract the first word of "ruby", so it can be a program name with args. +! set dummy ruby; ac_word=$2 + { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_path_vi_cv_path_ruby+set}" = set; then +--- 5705,5725 ---- + { $as_echo "$as_me:$LINENO: result: $enable_rubyinterp" >&5 + $as_echo "$enable_rubyinterp" >&6; } + if test "$enable_rubyinterp" = "yes"; then ++ { $as_echo "$as_me:$LINENO: checking --with-ruby-command argument" >&5 ++ $as_echo_n "checking --with-ruby-command argument... " >&6; } + +! # Check whether --with-ruby-command was given. +! if test "${with_ruby_command+set}" = set; then +! withval=$with_ruby_command; RUBY_CMD="$withval"; { $as_echo "$as_me:$LINENO: result: $RUBY_CMD" >&5 +! $as_echo "$RUBY_CMD" >&6; } +! else +! RUBY_CMD="ruby"; { $as_echo "$as_me:$LINENO: result: defaulting to $RUBY_CMD" >&5 +! $as_echo "defaulting to $RUBY_CMD" >&6; } +! fi +! +! +! # Extract the first word of "$RUBY_CMD", so it can be a program name with args. +! set dummy $RUBY_CMD; ac_word=$2 + { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + $as_echo_n "checking for $ac_word... " >&6; } + if test "${ac_cv_path_vi_cv_path_ruby+set}" = set; then +*************** +*** 5752,5762 **** + $as_echo "OK" >&6; } + { $as_echo "$as_me:$LINENO: checking Ruby header files" >&5 + $as_echo_n "checking Ruby header files... " >&6; } +! rubyhdrdir=`$vi_cv_path_ruby -r mkmf -e 'print Config::CONFIG["archdir"] || $hdrdir' 2>/dev/null` + if test "X$rubyhdrdir" != "X"; then + { $as_echo "$as_me:$LINENO: result: $rubyhdrdir" >&5 + $as_echo "$rubyhdrdir" >&6; } + RUBY_CFLAGS="-I$rubyhdrdir" + rubylibs=`$vi_cv_path_ruby -r rbconfig -e 'print Config::CONFIG["LIBS"]'` + if test "X$rubylibs" != "X"; then + RUBY_LIBS="$rubylibs" +--- 5766,5782 ---- + $as_echo "OK" >&6; } + { $as_echo "$as_me:$LINENO: checking Ruby header files" >&5 + $as_echo_n "checking Ruby header files... " >&6; } +! rubyhdrdir=`$vi_cv_path_ruby -r mkmf -e 'print Config::CONFIG["rubyhdrdir"] || Config::CONFIG["archdir"] || $hdrdir' 2>/dev/null` + if test "X$rubyhdrdir" != "X"; then + { $as_echo "$as_me:$LINENO: result: $rubyhdrdir" >&5 + $as_echo "$rubyhdrdir" >&6; } + RUBY_CFLAGS="-I$rubyhdrdir" ++ rubyarch=`$vi_cv_path_ruby -r rbconfig -e 'print Config::CONFIG["arch"]'` ++ if test -d "$rubyhdrdir/$rubyarch"; then ++ RUBY_CFLAGS="$RUBY_CFLAGS -I$rubyhdrdir/$rubyarch" ++ fi ++ rubyversion=`$vi_cv_path_ruby -r rbconfig -e 'print Config::CONFIG["ruby_version"].gsub(/\./, "")[0,2]'` ++ RUBY_CFLAGS="$RUBY_CFLAGS -DRUBY_VERSION=$rubyversion" + rubylibs=`$vi_cv_path_ruby -r rbconfig -e 'print Config::CONFIG["LIBS"]'` + if test "X$rubylibs" != "X"; then + RUBY_LIBS="$rubylibs" +*************** +*** 5793,5800 **** + _ACEOF + + else +! { $as_echo "$as_me:$LINENO: result: not found" >&5 +! $as_echo "not found" >&6; } + fi + else + { $as_echo "$as_me:$LINENO: result: too old; need Ruby version 1.6.0 or later" >&5 +--- 5813,5820 ---- + _ACEOF + + else +! { $as_echo "$as_me:$LINENO: result: not found; disabling Ruby" >&5 +! $as_echo "not found; disabling Ruby" >&6; } + fi + else + { $as_echo "$as_me:$LINENO: result: too old; need Ruby version 1.6.0 or later" >&5 +*** ../vim-7.2.360/src/configure.in 2009-12-16 17:14:08.000000000 +0100 +--- src/configure.in 2010-02-17 16:00:58.000000000 +0100 +*************** +*** 949,965 **** + [enable_rubyinterp="no"]) + AC_MSG_RESULT($enable_rubyinterp) + if test "$enable_rubyinterp" = "yes"; then + AC_SUBST(vi_cv_path_ruby) +! AC_PATH_PROG(vi_cv_path_ruby, ruby) + if test "X$vi_cv_path_ruby" != "X"; then + AC_MSG_CHECKING(Ruby version) + if $vi_cv_path_ruby -e '(VERSION rescue RUBY_VERSION) >= "1.6.0" or exit 1' >/dev/null 2>/dev/null; then + AC_MSG_RESULT(OK) + AC_MSG_CHECKING(Ruby header files) +! rubyhdrdir=`$vi_cv_path_ruby -r mkmf -e 'print Config::CONFIG[["archdir"]] || $hdrdir' 2>/dev/null` + if test "X$rubyhdrdir" != "X"; then + AC_MSG_RESULT($rubyhdrdir) + RUBY_CFLAGS="-I$rubyhdrdir" + rubylibs=`$vi_cv_path_ruby -r rbconfig -e 'print Config::CONFIG[["LIBS"]]'` + if test "X$rubylibs" != "X"; then + RUBY_LIBS="$rubylibs" +--- 949,975 ---- + [enable_rubyinterp="no"]) + AC_MSG_RESULT($enable_rubyinterp) + if test "$enable_rubyinterp" = "yes"; then ++ AC_MSG_CHECKING(--with-ruby-command argument) ++ AC_ARG_WITH(ruby-command, [ --with-ruby-command=RUBY name of the Ruby command (default: ruby)], ++ RUBY_CMD="$withval"; AC_MSG_RESULT($RUBY_CMD), ++ RUBY_CMD="ruby"; AC_MSG_RESULT(defaulting to $RUBY_CMD)) + AC_SUBST(vi_cv_path_ruby) +! AC_PATH_PROG(vi_cv_path_ruby, $RUBY_CMD) + if test "X$vi_cv_path_ruby" != "X"; then + AC_MSG_CHECKING(Ruby version) + if $vi_cv_path_ruby -e '(VERSION rescue RUBY_VERSION) >= "1.6.0" or exit 1' >/dev/null 2>/dev/null; then + AC_MSG_RESULT(OK) + AC_MSG_CHECKING(Ruby header files) +! rubyhdrdir=`$vi_cv_path_ruby -r mkmf -e 'print Config::CONFIG[["rubyhdrdir"]] || Config::CONFIG[["archdir"]] || $hdrdir' 2>/dev/null` + if test "X$rubyhdrdir" != "X"; then + AC_MSG_RESULT($rubyhdrdir) + RUBY_CFLAGS="-I$rubyhdrdir" ++ rubyarch=`$vi_cv_path_ruby -r rbconfig -e 'print Config::CONFIG[["arch"]]'` ++ if test -d "$rubyhdrdir/$rubyarch"; then ++ RUBY_CFLAGS="$RUBY_CFLAGS -I$rubyhdrdir/$rubyarch" ++ fi ++ rubyversion=`$vi_cv_path_ruby -r rbconfig -e 'print Config::CONFIG[["ruby_version"]].gsub(/\./, "")[[0,2]]'` ++ RUBY_CFLAGS="$RUBY_CFLAGS -DRUBY_VERSION=$rubyversion" + rubylibs=`$vi_cv_path_ruby -r rbconfig -e 'print Config::CONFIG[["LIBS"]]'` + if test "X$rubylibs" != "X"; then + RUBY_LIBS="$rubylibs" +*************** +*** 997,1003 **** + RUBY_PRO="if_ruby.pro" + AC_DEFINE(FEAT_RUBY) + else +! AC_MSG_RESULT(not found, disabling Ruby) + fi + else + AC_MSG_RESULT(too old; need Ruby version 1.6.0 or later) +--- 1007,1013 ---- + RUBY_PRO="if_ruby.pro" + AC_DEFINE(FEAT_RUBY) + else +! AC_MSG_RESULT(not found; disabling Ruby) + fi + else + AC_MSG_RESULT(too old; need Ruby version 1.6.0 or later) +*** ../vim-7.2.360/src/if_ruby.c 2010-02-17 15:11:35.000000000 +0100 +--- src/if_ruby.c 2010-02-17 16:08:47.000000000 +0100 +*************** +*** 54,59 **** +--- 54,62 ---- + #endif + + #include <ruby.h> ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ # include <ruby/encoding.h> ++ #endif + + #undef EXTERN + #undef _ +*************** +*** 65,70 **** +--- 68,95 ---- + # define __OPENTRANSPORTPROVIDERS__ + #endif + ++ /* ++ * Backward compatiblity for Ruby 1.8 and earlier. ++ * Ruby 1.9 does not provide STR2CSTR, instead StringValuePtr is provided. ++ * Ruby 1.9 does not provide RXXX(s)->len and RXXX(s)->ptr, instead ++ * RXXX_LEN(s) and RXXX_PTR(s) are provided. ++ */ ++ #ifndef StringValuePtr ++ # define StringValuePtr(s) STR2CSTR(s) ++ #endif ++ #ifndef RARRAY_LEN ++ # define RARRAY_LEN(s) RARRAY(s)->len ++ #endif ++ #ifndef RARRAY_PTR ++ # define RARRAY_PTR(s) RARRAY(s)->ptr ++ #endif ++ #ifndef RSTRING_LEN ++ # define RSTRING_LEN(s) RSTRING(s)->len ++ #endif ++ #ifndef RSTRING_PTR ++ # define RSTRING_PTR(s) RSTRING(s)->ptr ++ #endif ++ + #include "vim.h" + #include "version.h" + +*************** +*** 134,140 **** + #define rb_str_concat dll_rb_str_concat + #define rb_str_new dll_rb_str_new + #define rb_str_new2 dll_rb_str_new2 +! #define ruby_errinfo (*dll_ruby_errinfo) + #define ruby_init dll_ruby_init + #define ruby_init_loadpath dll_ruby_init_loadpath + #define NtInitialize dll_NtInitialize +--- 159,169 ---- + #define rb_str_concat dll_rb_str_concat + #define rb_str_new dll_rb_str_new + #define rb_str_new2 dll_rb_str_new2 +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 +! # define rb_errinfo dll_rb_errinfo +! #else +! # define ruby_errinfo (*dll_ruby_errinfo) +! #endif + #define ruby_init dll_ruby_init + #define ruby_init_loadpath dll_ruby_init_loadpath + #define NtInitialize dll_NtInitialize +*************** +*** 142,147 **** +--- 171,184 ---- + # define rb_w32_snprintf dll_rb_w32_snprintf + #endif + ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ # define ruby_script dll_ruby_script ++ # define rb_enc_find_index dll_rb_enc_find_index ++ # define rb_enc_find dll_rb_enc_find ++ # define rb_enc_str_new dll_rb_enc_str_new ++ # define rb_sprintf dll_rb_sprintf ++ #endif ++ + /* + * Pointers for dynamic link + */ +*************** +*** 189,195 **** +--- 226,236 ---- + static VALUE (*dll_rb_str_concat) (VALUE, VALUE); + static VALUE (*dll_rb_str_new) (const char*, long); + static VALUE (*dll_rb_str_new2) (const char*); ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ static VALUE (*dll_rb_errinfo) (void); ++ #else + static VALUE *dll_ruby_errinfo; ++ #endif + static void (*dll_ruby_init) (void); + static void (*dll_ruby_init_loadpath) (void); + static void (*dll_NtInitialize) (int*, char***); +*************** +*** 197,202 **** +--- 238,251 ---- + static int (*dll_rb_w32_snprintf)(char*, size_t, const char*, ...); + #endif + ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ static void (*dll_ruby_script) (const char*); ++ static int (*dll_rb_enc_find_index) (const char*); ++ static rb_encoding* (*dll_rb_enc_find) (const char*); ++ static VALUE (*dll_rb_enc_str_new) (const char*, long, rb_encoding*); ++ static VALUE (*dll_rb_sprintf) (const char*, ...); ++ #endif ++ + static HINSTANCE hinstRuby = 0; /* Instance of ruby.dll */ + + /* +*************** +*** 252,264 **** +--- 301,324 ---- + {"rb_str_concat", (RUBY_PROC*)&dll_rb_str_concat}, + {"rb_str_new", (RUBY_PROC*)&dll_rb_str_new}, + {"rb_str_new2", (RUBY_PROC*)&dll_rb_str_new2}, ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ {"rb_errinfo", (RUBY_PROC*)&dll_rb_errinfo}, ++ #else + {"ruby_errinfo", (RUBY_PROC*)&dll_ruby_errinfo}, ++ #endif + {"ruby_init", (RUBY_PROC*)&dll_ruby_init}, + {"ruby_init_loadpath", (RUBY_PROC*)&dll_ruby_init_loadpath}, + {"NtInitialize", (RUBY_PROC*)&dll_NtInitialize}, + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + {"rb_w32_snprintf", (RUBY_PROC*)&dll_rb_w32_snprintf}, + #endif ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ {"ruby_script", (RUBY_PROC*)&dll_ruby_script}, ++ {"rb_enc_find_index", (RUBY_PROC*)&dll_rb_enc_find_index}, ++ {"rb_enc_find", (RUBY_PROC*)&dll_rb_enc_find}, ++ {"rb_enc_str_new", (RUBY_PROC*)&dll_rb_enc_str_new}, ++ {"rb_sprintf", (RUBY_PROC*)&dll_rb_sprintf}, ++ #endif + {"", NULL}, + }; + +*************** +*** 348,353 **** +--- 408,465 ---- + vim_free(script); + } + ++ /* ++ * In Ruby 1.9 or later, ruby String object has encoding. ++ * conversion buffer string of vim to ruby String object using ++ * VIM encoding option. ++ */ ++ static VALUE ++ vim_str2rb_enc_str(const char *s) ++ { ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ int isnum; ++ long lval; ++ char_u *sval; ++ rb_encoding *enc; ++ ++ isnum = get_option_value((char_u *)"enc", &lval, &sval, 0); ++ if (isnum == 0) ++ { ++ enc = rb_enc_find((char *)sval); ++ vim_free(sval); ++ if (enc) { ++ return rb_enc_str_new(s, strlen(s), enc); ++ } ++ } ++ #endif ++ return rb_str_new2(s); ++ } ++ ++ static VALUE ++ eval_enc_string_protect(const char *str, int *state) ++ { ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ int isnum; ++ long lval; ++ char_u *sval; ++ rb_encoding *enc; ++ VALUE v; ++ ++ isnum = get_option_value((char_u *)"enc", &lval, &sval, 0); ++ if (isnum == 0) ++ { ++ enc = rb_enc_find((char *)sval); ++ vim_free(sval); ++ if (enc) ++ { ++ v = rb_sprintf("#-*- coding:%s -*-\n%s", rb_enc_name(enc), str); ++ return rb_eval_string_protect(StringValuePtr(v), state); ++ } ++ } ++ #endif ++ return rb_eval_string_protect(str, state); ++ } ++ + void ex_rubydo(exarg_T *eap) + { + int state; +*************** +*** 360,368 **** + for (i = eap->line1; i <= eap->line2; i++) { + VALUE line, oldline; + +! line = oldline = rb_str_new2((char *)ml_get(i)); + rb_lastline_set(line); +! rb_eval_string_protect((char *) eap->arg, &state); + if (state) { + error_print(state); + break; +--- 472,480 ---- + for (i = eap->line1; i <= eap->line2; i++) { + VALUE line, oldline; + +! line = oldline = vim_str2rb_enc_str((char *)ml_get(i)); + rb_lastline_set(line); +! eval_enc_string_protect((char *) eap->arg, &state); + if (state) { + error_print(state); + break; +*************** +*** 373,379 **** + EMSG(_("E265: $_ must be an instance of String")); + return; + } +! ml_replace(i, (char_u *) STR2CSTR(line), 1); + changed(); + #ifdef SYNTAX_HL + syn_changed(i); /* recompute syntax hl. for this line */ +--- 485,491 ---- + EMSG(_("E265: $_ must be an instance of String")); + return; + } +! ml_replace(i, (char_u *) StringValuePtr(line), 1); + changed(); + #ifdef SYNTAX_HL + syn_changed(i); /* recompute syntax hl. for this line */ +*************** +*** 428,436 **** +--- 540,557 ---- + char *argv[] = {"gvim.exe"}; + NtInitialize(&argc, &argv); + #endif ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ RUBY_INIT_STACK; ++ #endif + ruby_init(); ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ ruby_script("vim-ruby"); ++ #endif + ruby_init_loadpath(); + ruby_io_init(); ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ rb_enc_find_index("encdb"); ++ #endif + ruby_vim_init(); + ruby_initialized = 1; + #ifdef DYNAMIC_RUBY +*************** +*** 448,455 **** +--- 569,578 ---- + static void error_print(int state) + { + #ifndef DYNAMIC_RUBY ++ #if !(defined(RUBY_VERSION) && RUBY_VERSION >= 19) + RUBYEXTERN VALUE ruby_errinfo; + #endif ++ #endif + VALUE eclass; + VALUE einfo; + char buff[BUFSIZ]; +*************** +*** 482,490 **** + break; + case TAG_RAISE: + case TAG_FATAL: + eclass = CLASS_OF(ruby_errinfo); + einfo = rb_obj_as_string(ruby_errinfo); +! if (eclass == rb_eRuntimeError && RSTRING(einfo)->len == 0) { + EMSG(_("E272: unhandled exception")); + } + else { +--- 605,618 ---- + break; + case TAG_RAISE: + case TAG_FATAL: ++ #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 ++ eclass = CLASS_OF(rb_errinfo()); ++ einfo = rb_obj_as_string(rb_errinfo()); ++ #else + eclass = CLASS_OF(ruby_errinfo); + einfo = rb_obj_as_string(ruby_errinfo); +! #endif +! if (eclass == rb_eRuntimeError && RSTRING_LEN(einfo) == 0) { + EMSG(_("E272: unhandled exception")); + } + else { +*************** +*** 493,499 **** + + epath = rb_class_path(eclass); + vim_snprintf(buff, BUFSIZ, "%s: %s", +! RSTRING(epath)->ptr, RSTRING(einfo)->ptr); + p = strchr(buff, '\n'); + if (p) *p = '\0'; + EMSG(buff); +--- 621,627 ---- + + epath = rb_class_path(eclass); + vim_snprintf(buff, BUFSIZ, "%s: %s", +! RSTRING_PTR(epath), RSTRING_PTR(einfo)); + p = strchr(buff, '\n'); + if (p) *p = '\0'; + EMSG(buff); +*************** +*** 511,518 **** + char *buff, *p; + + str = rb_obj_as_string(str); +! buff = ALLOCA_N(char, RSTRING(str)->len); +! strcpy(buff, RSTRING(str)->ptr); + p = strchr(buff, '\n'); + if (p) *p = '\0'; + MSG(buff); +--- 639,646 ---- + char *buff, *p; + + str = rb_obj_as_string(str); +! buff = ALLOCA_N(char, RSTRING_LEN(str)); +! strcpy(buff, RSTRING_PTR(str)); + p = strchr(buff, '\n'); + if (p) *p = '\0'; + MSG(buff); +*************** +*** 521,541 **** + + static VALUE vim_set_option(VALUE self UNUSED, VALUE str) + { +! do_set((char_u *)STR2CSTR(str), 0); + update_screen(NOT_VALID); + return Qnil; + } + + static VALUE vim_command(VALUE self UNUSED, VALUE str) + { +! do_cmdline_cmd((char_u *)STR2CSTR(str)); + return Qnil; + } + + static VALUE vim_evaluate(VALUE self UNUSED, VALUE str) + { + #ifdef FEAT_EVAL +! char_u *value = eval_to_string((char_u *)STR2CSTR(str), NULL, TRUE); + + if (value != NULL) + { +--- 649,669 ---- + + static VALUE vim_set_option(VALUE self UNUSED, VALUE str) + { +! do_set((char_u *)StringValuePtr(str), 0); + update_screen(NOT_VALID); + return Qnil; + } + + static VALUE vim_command(VALUE self UNUSED, VALUE str) + { +! do_cmdline_cmd((char_u *)StringValuePtr(str)); + return Qnil; + } + + static VALUE vim_evaluate(VALUE self UNUSED, VALUE str) + { + #ifdef FEAT_EVAL +! char_u *value = eval_to_string((char_u *)StringValuePtr(str), NULL, TRUE); + + if (value != NULL) + { +*************** +*** 640,648 **** + if (n > 0 && n <= buf->b_ml.ml_line_count) + { + char *line = (char *)ml_get_buf(buf, n, FALSE); +! return line ? rb_str_new2(line) : Qnil; + } +! rb_raise(rb_eIndexError, "index %d out of buffer", n); + #ifndef __GNUC__ + return Qnil; /* For stop warning */ + #endif +--- 768,776 ---- + if (n > 0 && n <= buf->b_ml.ml_line_count) + { + char *line = (char *)ml_get_buf(buf, n, FALSE); +! return line ? vim_str2rb_enc_str(line) : Qnil; + } +! rb_raise(rb_eIndexError, "line number %ld out of range", (long)n); + #ifndef __GNUC__ + return Qnil; /* For stop warning */ + #endif +*************** +*** 659,665 **** + + static VALUE set_buffer_line(buf_T *buf, linenr_T n, VALUE str) + { +! char *line = STR2CSTR(str); + aco_save_T aco; + + if (n > 0 && n <= buf->b_ml.ml_line_count && line != NULL) +--- 787,793 ---- + + static VALUE set_buffer_line(buf_T *buf, linenr_T n, VALUE str) + { +! char *line = StringValuePtr(str); + aco_save_T aco; + + if (n > 0 && n <= buf->b_ml.ml_line_count && line != NULL) +*************** +*** 683,689 **** + } + else + { +! rb_raise(rb_eIndexError, "index %d out of buffer", n); + #ifndef __GNUC__ + return Qnil; /* For stop warning */ + #endif +--- 811,817 ---- + } + else + { +! rb_raise(rb_eIndexError, "line number %ld out of range", (long)n); + #ifndef __GNUC__ + return Qnil; /* For stop warning */ + #endif +*************** +*** 729,735 **** + } + else + { +! rb_raise(rb_eIndexError, "index %d out of buffer", n); + } + return Qnil; + } +--- 857,863 ---- + } + else + { +! rb_raise(rb_eIndexError, "line number %ld out of range", n); + } + return Qnil; + } +*************** +*** 737,747 **** + static VALUE buffer_append(VALUE self, VALUE num, VALUE str) + { + buf_T *buf = get_buf(self); +! char *line = STR2CSTR(str); + long n = NUM2LONG(num); + aco_save_T aco; + +! if (n >= 0 && n <= buf->b_ml.ml_line_count && line != NULL) + { + /* set curwin/curbuf for "buf" and save some things */ + aucmd_prepbuf(&aco, buf); +--- 865,878 ---- + static VALUE buffer_append(VALUE self, VALUE num, VALUE str) + { + buf_T *buf = get_buf(self); +! char *line = StringValuePtr(str); + long n = NUM2LONG(num); + aco_save_T aco; + +! if (line != NULL) { +! rb_raise(rb_eIndexError, "NULL line"); +! } +! else if (n >= 0 && n <= buf->b_ml.ml_line_count) + { + /* set curwin/curbuf for "buf" and save some things */ + aucmd_prepbuf(&aco, buf); +*************** +*** 763,769 **** + update_curbuf(NOT_VALID); + } + else { +! rb_raise(rb_eIndexError, "index %d out of buffer", n); + } + return str; + } +--- 894,900 ---- + update_curbuf(NOT_VALID); + } + else { +! rb_raise(rb_eIndexError, "line number %ld out of range", n); + } + return str; + } +*************** +*** 904,913 **** + win_T *win = get_win(self); + + Check_Type(pos, T_ARRAY); +! if (RARRAY(pos)->len != 2) + rb_raise(rb_eArgError, "array length must be 2"); +! lnum = RARRAY(pos)->ptr[0]; +! col = RARRAY(pos)->ptr[1]; + win->w_cursor.lnum = NUM2LONG(lnum); + win->w_cursor.col = NUM2UINT(col); + check_cursor(); /* put cursor on an existing line */ +--- 1035,1044 ---- + win_T *win = get_win(self); + + Check_Type(pos, T_ARRAY); +! if (RARRAY_LEN(pos) != 2) + rb_raise(rb_eArgError, "array length must be 2"); +! lnum = RARRAY_PTR(pos)[0]; +! col = RARRAY_PTR(pos)[1]; + win->w_cursor.lnum = NUM2LONG(lnum); + win->w_cursor.col = NUM2UINT(col); + check_cursor(); /* put cursor on an existing line */ +*************** +*** 924,930 **** + if (i > 0) rb_str_cat(str, ", ", 2); + rb_str_concat(str, rb_inspect(argv[i])); + } +! MSG(RSTRING(str)->ptr); + return Qnil; + } + +--- 1055,1061 ---- + if (i > 0) rb_str_cat(str, ", ", 2); + rb_str_concat(str, rb_inspect(argv[i])); + } +! MSG(RSTRING_PTR(str)); + return Qnil; + } + +*** ../vim-7.2.360/src/version.c 2010-02-17 15:11:35.000000000 +0100 +--- src/version.c 2010-02-17 15:59:12.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 361, + /**/ + +-- +"Marriage is when a man and woman become as one; the trouble starts +when they try to decide which one" + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.362 b/source/ap/vim/patches/7.2.362 new file mode 100644 index 000000000..2f62cf624 --- /dev/null +++ b/source/ap/vim/patches/7.2.362 @@ -0,0 +1,95 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.362 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.362 (extra, after 7.2.352) +Problem: Win64: Vim doesn't work when cross-compiled with MingW libraries. +Solution: Instead of handling WM_NCCREATE, create wide text area window + class if the parent window iw side. (Sergey Khorev) +Files: src/gui_w32.c, src/gui_w48.c + + +*** ../vim-7.2.361/src/gui_w32.c 2009-12-24 16:11:24.000000000 +0100 +--- src/gui_w32.c 2010-02-17 16:26:58.000000000 +0100 +*************** +*** 1329,1334 **** +--- 1329,1335 ---- + WNDCLASS wndclass; + #ifdef FEAT_MBYTE + const WCHAR szVimWndClassW[] = VIM_CLASSW; ++ const WCHAR szTextAreaClassW[] = L"VimTextArea"; + WNDCLASSW wndclassw; + #endif + #ifdef GLOBAL_IME +*************** +*** 1479,1484 **** +--- 1480,1507 ---- + #endif + + /* Create the text area window */ ++ #ifdef FEAT_MBYTE ++ if (wide_WindowProc) ++ { ++ if (GetClassInfoW(s_hinst, szTextAreaClassW, &wndclassw) == 0) ++ { ++ wndclassw.style = CS_OWNDC; ++ wndclassw.lpfnWndProc = _TextAreaWndProc; ++ wndclassw.cbClsExtra = 0; ++ wndclassw.cbWndExtra = 0; ++ wndclassw.hInstance = s_hinst; ++ wndclassw.hIcon = NULL; ++ wndclassw.hCursor = LoadCursor(NULL, IDC_ARROW); ++ wndclassw.hbrBackground = NULL; ++ wndclassw.lpszMenuName = NULL; ++ wndclassw.lpszClassName = szTextAreaClassW; ++ ++ if (RegisterClassW(&wndclassw) == 0) ++ return FAIL; ++ } ++ } ++ else ++ #endif + if (GetClassInfo(s_hinst, szTextAreaClass, &wndclass) == 0) + { + wndclass.style = CS_OWNDC; +*** ../vim-7.2.361/src/gui_w48.c 2010-02-03 12:23:16.000000000 +0100 +--- src/gui_w48.c 2010-02-17 16:27:21.000000000 +0100 +*************** +*** 1084,1096 **** + case WM_NOTIFY: Handle_WM_Notify(hwnd, (LPNMHDR)lParam); + return TRUE; + #endif +- /* Workaround for the problem that MyWindowProc() returns FALSE on 64 +- * bit windows when cross-compiled using Mingw libraries. (Andy +- * Kittner) */ +- case WM_NCCREATE: +- MyWindowProc(hwnd, uMsg, wParam, lParam); +- return TRUE; +- + default: + return MyWindowProc(hwnd, uMsg, wParam, lParam); + } +--- 1084,1089 ---- +*** ../vim-7.2.361/src/version.c 2010-02-17 16:23:03.000000000 +0100 +--- src/version.c 2010-02-17 16:30:52.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 362, + /**/ + +-- +"Marriage is the process of finding out what kind of man your wife +would have preferred" + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.363 b/source/ap/vim/patches/7.2.363 new file mode 100644 index 000000000..2447103ba --- /dev/null +++ b/source/ap/vim/patches/7.2.363 @@ -0,0 +1,70 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.363 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.363 +Problem: Can't dynamically load Perl 5.10. +Solution: Add the function Perl_croak_xs_usage. (Sergey Khorev) +Files: src/if_perl.xs + + +*** ../vim-7.2.362/src/if_perl.xs 2009-11-11 14:45:36.000000000 +0100 +--- src/if_perl.xs 2010-02-17 16:33:16.000000000 +0100 +*************** +*** 93,98 **** +--- 93,101 ---- + # define perl_free dll_perl_free + # define Perl_get_context dll_Perl_get_context + # define Perl_croak dll_Perl_croak ++ # if (PERL_REVISION == 5) && (PERL_VERSION >= 10) ++ # define Perl_croak_xs_usage dll_Perl_croak_xs_usage ++ # endif + # ifndef PROTO + # define Perl_croak_nocontext dll_Perl_croak_nocontext + # define Perl_call_argv dll_Perl_call_argv +*************** +*** 202,207 **** +--- 205,213 ---- + static int (*perl_parse)(PerlInterpreter*, XSINIT_t, int, char**, char**); + static void* (*Perl_get_context)(void); + static void (*Perl_croak)(pTHX_ const char*, ...); ++ #if (PERL_REVISION == 5) && (PERL_VERSION >= 10) ++ static void (*Perl_croak_xs_usage)(pTHX_ const CV *const, const char *const params); ++ #endif + static void (*Perl_croak_nocontext)(const char*, ...); + static I32 (*Perl_dowantarray)(pTHX); + static void (*Perl_free_tmps)(pTHX); +*************** +*** 306,311 **** +--- 312,320 ---- + {"perl_parse", (PERL_PROC*)&perl_parse}, + {"Perl_get_context", (PERL_PROC*)&Perl_get_context}, + {"Perl_croak", (PERL_PROC*)&Perl_croak}, ++ #if (PERL_REVISION == 5) && (PERL_VERSION >= 10) ++ {"Perl_croak_xs_usage", (PERL_PROC*)&Perl_croak_xs_usage}, ++ #endif + {"Perl_croak_nocontext", (PERL_PROC*)&Perl_croak_nocontext}, + {"Perl_dowantarray", (PERL_PROC*)&Perl_dowantarray}, + {"Perl_free_tmps", (PERL_PROC*)&Perl_free_tmps}, +*** ../vim-7.2.362/src/version.c 2010-02-17 16:31:27.000000000 +0100 +--- src/version.c 2010-02-17 16:35:39.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 363, + /**/ + +-- +If you're sending someone Styrofoam, what do you pack it in? + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.364 b/source/ap/vim/patches/7.2.364 new file mode 100644 index 000000000..c3c6e8b63 --- /dev/null +++ b/source/ap/vim/patches/7.2.364 @@ -0,0 +1,91 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.364 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.364 (extra) +Problem: Can't build gvimext.dll on Win 7 x64 using MinGW (John Marriott) +Solution: Check if _MSC_VER is defined. (Andy Kittner) +Files: src/GvimExt/gvimext.h + + +*** ../vim-7.2.363/src/GvimExt/gvimext.h 2006-04-24 21:23:03.000000000 +0200 +--- src/GvimExt/gvimext.h 2010-02-17 17:20:00.000000000 +0100 +*************** +*** 14,22 **** + #if !defined(AFX_STDAFX_H__3389658B_AD83_11D3_9C1E_0090278BBD99__INCLUDED_) + #define AFX_STDAFX_H__3389658B_AD83_11D3_9C1E_0090278BBD99__INCLUDED_ + +! #if _MSC_VER > 1000 + #pragma once +! #endif // _MSC_VER > 1000 + + // Insert your headers here + // #define WIN32_LEAN_AND_MEAN // Exclude rarely-used stuff from Windows headers +--- 14,22 ---- + #if !defined(AFX_STDAFX_H__3389658B_AD83_11D3_9C1E_0090278BBD99__INCLUDED_) + #define AFX_STDAFX_H__3389658B_AD83_11D3_9C1E_0090278BBD99__INCLUDED_ + +! #if defined(_MSC_VER) && _MSC_VER > 1000 + #pragma once +! #endif + + // Insert your headers here + // #define WIN32_LEAN_AND_MEAN // Exclude rarely-used stuff from Windows headers +*************** +*** 34,40 **** + #define INC_OLE2 // WIN32, get ole2 from windows.h + + /* Visual Studio 2005 has 'deprecated' many of the standard CRT functions */ +! #if _MSC_VER >= 1400 + # define _CRT_SECURE_NO_DEPRECATE + # define _CRT_NONSTDC_NO_DEPRECATE + #endif +--- 34,40 ---- + #define INC_OLE2 // WIN32, get ole2 from windows.h + + /* Visual Studio 2005 has 'deprecated' many of the standard CRT functions */ +! #if defined(_MSC_VER) && _MSC_VER >= 1400 + # define _CRT_SECURE_NO_DEPRECATE + # define _CRT_NONSTDC_NO_DEPRECATE + #endif +*************** +*** 44,50 **** + #include <shlobj.h> + + /* Accommodate old versions of VC that don't have a modern Platform SDK */ +! #if _MSC_VER < 1300 + # undef UINT_PTR + # define UINT_PTR UINT + #endif +--- 44,50 ---- + #include <shlobj.h> + + /* Accommodate old versions of VC that don't have a modern Platform SDK */ +! #if defined(_MSC_VER) && _MSC_VER < 1300 + # undef UINT_PTR + # define UINT_PTR UINT + #endif +*** ../vim-7.2.363/src/version.c 2010-02-17 16:40:47.000000000 +0100 +--- src/version.c 2010-02-17 17:23:15.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 364, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +245. You use Real Audio to listen to a radio station from a distant + city rather than turn on your stereo system. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.365 b/source/ap/vim/patches/7.2.365 new file mode 100644 index 000000000..e48990b92 --- /dev/null +++ b/source/ap/vim/patches/7.2.365 @@ -0,0 +1,71 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.365 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.365 (extra) +Problem: MS-Windows with MingW: "File->Save As" does not work. (John + Marriott) +Solution: Correctly fill in structure size. (Andy Kittner) +Files: src/gui_w48.c + + +*** ../vim-7.2.364/src/gui_w48.c 2010-02-17 16:31:27.000000000 +0100 +--- src/gui_w48.c 2010-02-17 17:30:15.000000000 +0100 +*************** +*** 3345,3351 **** + #ifdef OPENFILENAME_SIZE_VERSION_400 + /* be compatible with Windows NT 4.0 */ + /* TODO: what to use for OPENFILENAMEW??? */ +! fileStruct.lStructSize = sizeof(OPENFILENAME_SIZE_VERSION_400); + #else + fileStruct.lStructSize = sizeof(fileStruct); + #endif +--- 3345,3351 ---- + #ifdef OPENFILENAME_SIZE_VERSION_400 + /* be compatible with Windows NT 4.0 */ + /* TODO: what to use for OPENFILENAMEW??? */ +! fileStruct.lStructSize = OPENFILENAME_SIZE_VERSION_400; + #else + fileStruct.lStructSize = sizeof(fileStruct); + #endif +*************** +*** 3506,3512 **** + memset(&fileStruct, 0, sizeof(OPENFILENAME)); + #ifdef OPENFILENAME_SIZE_VERSION_400 + /* be compatible with Windows NT 4.0 */ +! fileStruct.lStructSize = sizeof(OPENFILENAME_SIZE_VERSION_400); + #else + fileStruct.lStructSize = sizeof(fileStruct); + #endif +--- 3506,3512 ---- + memset(&fileStruct, 0, sizeof(OPENFILENAME)); + #ifdef OPENFILENAME_SIZE_VERSION_400 + /* be compatible with Windows NT 4.0 */ +! fileStruct.lStructSize = OPENFILENAME_SIZE_VERSION_400; + #else + fileStruct.lStructSize = sizeof(fileStruct); + #endif +*** ../vim-7.2.364/src/version.c 2010-02-17 17:24:23.000000000 +0100 +--- src/version.c 2010-02-17 17:31:54.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 365, + /**/ + + +-- +hundred-and-one symptoms of being an internet addict: +246. You use up your free 100 hours in less than a week. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.366 b/source/ap/vim/patches/7.2.366 new file mode 100644 index 000000000..952a0f2f2 --- /dev/null +++ b/source/ap/vim/patches/7.2.366 @@ -0,0 +1,134 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.366 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.366 +Problem: CTRL-B doesn't go back to the first line of the buffer. +Solution: Avoid an overflow when adding MAXCOL. +Files: src/move.c + + +*** ../vim-7.2.365/src/move.c 2010-02-03 17:42:59.000000000 +0100 +--- src/move.c 2010-02-17 17:49:34.000000000 +0100 +*************** +*** 1610,1616 **** + * Add one line above "lp->lnum". This can be a filler line, a closed fold or + * a (wrapped) text line. Uses and sets "lp->fill". + * Returns the height of the added line in "lp->height". +! * Lines above the first one are incredibly high. + */ + static void + topline_back(lp) +--- 1610,1616 ---- + * Add one line above "lp->lnum". This can be a filler line, a closed fold or + * a (wrapped) text line. Uses and sets "lp->fill". + * Returns the height of the added line in "lp->height". +! * Lines above the first one are incredibly high: MAXCOL. + */ + static void + topline_back(lp) +*************** +*** 1942,1948 **** + { + loff.lnum = curwin->w_topline; + topline_back(&loff); +! if (used + loff.height > curwin->w_height) + break; + used += loff.height; + #ifdef FEAT_DIFF +--- 1942,1948 ---- + { + loff.lnum = curwin->w_topline; + topline_back(&loff); +! if (loff.height == MAXCOL || used + loff.height > curwin->w_height) + break; + used += loff.height; + #ifdef FEAT_DIFF +*************** +*** 2021,2027 **** + + /* Add one line above */ + topline_back(&loff); +! used += loff.height; + if (used > curwin->w_height) + break; + if (loff.lnum >= curwin->w_botline +--- 2021,2030 ---- + + /* Add one line above */ + topline_back(&loff); +! if (loff.height == MAXCOL) +! used = MAXCOL; +! else +! used += loff.height; + if (used > curwin->w_height) + break; + if (loff.lnum >= curwin->w_botline +*************** +*** 2175,2181 **** + if (below > above) /* add a line above the cursor */ + { + topline_back(&loff); +! used += loff.height; + if (used > curwin->w_height) + break; + above += loff.height; +--- 2178,2187 ---- + if (below > above) /* add a line above the cursor */ + { + topline_back(&loff); +! if (loff.height == MAXCOL) +! used = MAXCOL; +! else +! used += loff.height; + if (used > curwin->w_height) + break; + above += loff.height; +*************** +*** 2472,2480 **** + while (n <= curwin->w_height && loff.lnum >= 1) + { + topline_back(&loff); +! n += loff.height; + } +! if (n <= curwin->w_height) /* at begin of file */ + { + curwin->w_topline = 1; + #ifdef FEAT_DIFF +--- 2478,2489 ---- + while (n <= curwin->w_height && loff.lnum >= 1) + { + topline_back(&loff); +! if (loff.height == MAXCOL) +! n = MAXCOL; +! else +! n += loff.height; + } +! if (loff.lnum < 1) /* at begin of file */ + { + curwin->w_topline = 1; + #ifdef FEAT_DIFF +*** ../vim-7.2.365/src/version.c 2010-02-17 17:34:38.000000000 +0100 +--- src/version.c 2010-02-17 18:13:22.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 366, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +247. You use www.switchboard.com instead of dialing 411 and 555-12-12 + for directory assistance. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.367 b/source/ap/vim/patches/7.2.367 new file mode 100644 index 000000000..6d461c987 --- /dev/null +++ b/source/ap/vim/patches/7.2.367 @@ -0,0 +1,77 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.367 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.367 +Problem: "xxd -r -p" doesn't work as documented. +Solution: Skip white space. (James Vega) +Files: src/xxd/xxd.c + + +*** ../vim-7.2.366/src/xxd/xxd.c 2009-06-16 18:29:37.000000000 +0200 +--- src/xxd/xxd.c 2010-02-17 18:25:11.000000000 +0100 +*************** +*** 231,237 **** + fprintf(stderr, " or\n %s -r [-s [-]offset] [-c cols] [-ps] [infile [outfile]]\n", pname); + fprintf(stderr, "Options:\n"); + fprintf(stderr, " -a toggle autoskip: A single '*' replaces nul-lines. Default off.\n"); +! fprintf(stderr, " -b binary digit dump (incompatible with -p,-i,-r). Default hex.\n"); + fprintf(stderr, " -c cols format <cols> octets per line. Default 16 (-i: 12, -ps: 30).\n"); + fprintf(stderr, " -E show characters in EBCDIC. Default ASCII.\n"); + fprintf(stderr, " -g number of octets per group in normal output. Default 2.\n"); +--- 231,237 ---- + fprintf(stderr, " or\n %s -r [-s [-]offset] [-c cols] [-ps] [infile [outfile]]\n", pname); + fprintf(stderr, "Options:\n"); + fprintf(stderr, " -a toggle autoskip: A single '*' replaces nul-lines. Default off.\n"); +! fprintf(stderr, " -b binary digit dump (incompatible with -ps,-i,-r). Default hex.\n"); + fprintf(stderr, " -c cols format <cols> octets per line. Default 16 (-i: 12, -ps: 30).\n"); + fprintf(stderr, " -E show characters in EBCDIC. Default ASCII.\n"); + fprintf(stderr, " -g number of octets per group in normal output. Default 2.\n"); +*************** +*** 276,286 **** + if (c == '\r') /* Doze style input file? */ + continue; + +! #if 0 /* this doesn't work when there is normal text after the hex codes in +! the last line that looks like hex */ +! if (c == ' ' || c == '\n' || c == '\t') /* allow multiple spaces */ + continue; +- #endif + + n3 = n2; + n2 = n1; +--- 276,286 ---- + if (c == '\r') /* Doze style input file? */ + continue; + +! /* Allow multiple spaces. This doesn't work when there is normal text +! * after the hex codes in the last line that looks like hex, thus only +! * use it for PostScript format. */ +! if (hextype == HEX_POSTSCRIPT && (c == ' ' || c == '\n' || c == '\t')) + continue; + + n3 = n2; + n2 = n1; +*** ../vim-7.2.366/src/version.c 2010-02-17 18:20:23.000000000 +0100 +--- src/version.c 2010-02-17 18:26:35.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 367, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +248. You sign your letters with your e-mail address instead of your name. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.368 b/source/ap/vim/patches/7.2.368 new file mode 100644 index 000000000..43107699b --- /dev/null +++ b/source/ap/vim/patches/7.2.368 @@ -0,0 +1,52 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.368 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.368 (after 7.2.361) +Problem: Ruby interface: Appending line doesn't work. (Michael Henry) +Solution: Reverse check for NULL line. (James Vega) +Files: src/if_ruby.c + + +*** ../vim-7.2.367/src/if_ruby.c 2010-02-17 16:23:03.000000000 +0100 +--- src/if_ruby.c 2010-02-18 15:47:42.000000000 +0100 +*************** +*** 869,875 **** + long n = NUM2LONG(num); + aco_save_T aco; + +! if (line != NULL) { + rb_raise(rb_eIndexError, "NULL line"); + } + else if (n >= 0 && n <= buf->b_ml.ml_line_count) +--- 869,875 ---- + long n = NUM2LONG(num); + aco_save_T aco; + +! if (line == NULL) { + rb_raise(rb_eIndexError, "NULL line"); + } + else if (n >= 0 && n <= buf->b_ml.ml_line_count) +*** ../vim-7.2.367/src/version.c 2010-02-17 18:28:06.000000000 +0100 +--- src/version.c 2010-02-18 15:48:09.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 368, + /**/ + +-- +hundred-and-one symptoms of being an internet addict: +251. You've never seen your closest friends who usually live WAY too far away. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.369 b/source/ap/vim/patches/7.2.369 new file mode 100644 index 000000000..adcab24e9 --- /dev/null +++ b/source/ap/vim/patches/7.2.369 @@ -0,0 +1,55 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.369 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.369 +Problem: Error message is not easy to understand. +Solution: Add quotes. (SungHyun Nam) +Files: src/ex_cmds2.c + + +*** ../vim-7.2.368/src/ex_cmds2.c 2010-02-03 15:14:15.000000000 +0100 +--- src/ex_cmds2.c 2010-02-18 21:16:20.000000000 +0100 +*************** +*** 1092,1098 **** + set_vim_var_nr(VV_PROFILING, 1L); + } + else if (do_profiling == PROF_NONE) +! EMSG(_("E750: First use :profile start <fname>")); + else if (STRCMP(eap->arg, "pause") == 0) + { + if (do_profiling == PROF_YES) +--- 1092,1098 ---- + set_vim_var_nr(VV_PROFILING, 1L); + } + else if (do_profiling == PROF_NONE) +! EMSG(_("E750: First use \":profile start {fname}\"")); + else if (STRCMP(eap->arg, "pause") == 0) + { + if (do_profiling == PROF_YES) +*** ../vim-7.2.368/src/version.c 2010-02-18 15:51:25.000000000 +0100 +--- src/version.c 2010-02-24 13:58:28.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 369, + /**/ + +-- +MAN: You don't frighten us, English pig-dog! Go and boil your bottoms, + son of a silly person. I blow my nose on you, so-called Arthur-king, + you and your silly English K...kaniggets. + He puts hands to his ears and blows a raspberry. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.370 b/source/ap/vim/patches/7.2.370 new file mode 100644 index 000000000..3e8457e0c --- /dev/null +++ b/source/ap/vim/patches/7.2.370 @@ -0,0 +1,156 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.370 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.370 (after 7.2.356) +Problem: A redraw may cause folds to be closed. +Solution: Revert part of the previous patch. Add a test. (Lech Lorens) +Files: src/diff.c, src/fold.c, src/option.c, src/testdir/test45.in, + src/testdir/test45.ok + + +*** ../vim-7.2.369/src/diff.c 2009-07-22 16:22:33.000000000 +0200 +--- src/diff.c 2010-02-24 14:31:12.000000000 +0100 +*************** +*** 1117,1142 **** + win_T *wp; + int addbuf; /* Add buffer to diff. */ + { + wp->w_p_diff = TRUE; + wp->w_p_scb = TRUE; + wp->w_p_wrap = FALSE; + # ifdef FEAT_FOLDING +! { +! win_T *old_curwin = curwin; +! +! curwin = wp; +! curbuf = curwin->w_buffer; +! set_string_option_direct((char_u *)"fdm", -1, (char_u *)"diff", + OPT_LOCAL|OPT_FREE, 0); +! curwin = old_curwin; +! curbuf = curwin->w_buffer; +! wp->w_p_fdc = diff_foldcolumn; +! wp->w_p_fen = TRUE; +! wp->w_p_fdl = 0; +! foldUpdateAll(wp); +! /* make sure topline is not halfway a fold */ +! changed_window_setting_win(wp); +! } + # endif + #ifdef FEAT_SCROLLBIND + if (vim_strchr(p_sbo, 'h') == NULL) +--- 1117,1147 ---- + win_T *wp; + int addbuf; /* Add buffer to diff. */ + { ++ # ifdef FEAT_FOLDING ++ win_T *old_curwin = curwin; ++ ++ /* close the manually opened folds */ ++ curwin = wp; ++ newFoldLevel(); ++ curwin = old_curwin; ++ # endif ++ + wp->w_p_diff = TRUE; + wp->w_p_scb = TRUE; + wp->w_p_wrap = FALSE; + # ifdef FEAT_FOLDING +! curwin = wp; +! curbuf = curwin->w_buffer; +! set_string_option_direct((char_u *)"fdm", -1, (char_u *)"diff", + OPT_LOCAL|OPT_FREE, 0); +! curwin = old_curwin; +! curbuf = curwin->w_buffer; +! wp->w_p_fdc = diff_foldcolumn; +! wp->w_p_fen = TRUE; +! wp->w_p_fdl = 0; +! foldUpdateAll(wp); +! /* make sure topline is not halfway a fold */ +! changed_window_setting_win(wp); + # endif + #ifdef FEAT_SCROLLBIND + if (vim_strchr(p_sbo, 'h') == NULL) +*** ../vim-7.2.369/src/fold.c 2010-02-03 18:14:41.000000000 +0100 +--- src/fold.c 2010-02-24 13:09:04.000000000 +0100 +*************** +*** 854,865 **** + && fp->fd_top < bot) + { + fp->fd_small = MAYBE; +- +- /* Not sure if this is the right place to reset fd_flags (suggested by +- * Lech Lorens). */ +- if (wp->w_foldinvalid) +- fp->fd_flags = FD_LEVEL; +- + ++fp; + } + +--- 854,859 ---- +*** ../vim-7.2.369/src/option.c 2010-02-11 17:02:04.000000000 +0100 +--- src/option.c 2010-02-24 13:09:44.000000000 +0100 +*************** +*** 6586,6592 **** +--- 6586,6596 ---- + || *curwin->w_p_fdm == NUL) + errmsg = e_invarg; + else ++ { + foldUpdateAll(curwin); ++ if (foldmethodIsDiff(curwin)) ++ newFoldLevel(); ++ } + } + # ifdef FEAT_EVAL + /* 'foldexpr' */ +*** ../vim-7.2.369/src/testdir/test45.in 2009-11-03 14:46:35.000000000 +0100 +--- src/testdir/test45.in 2010-02-24 13:02:39.000000000 +0100 +*************** +*** 36,41 **** +--- 36,43 ---- + k:call append("$", getline(".")) + jAcommentstart Acommentend:set fdl=1 + 3j:call append("$", getline(".")) ++ :set fdl=0 ++ zOj:call append("$", getline(".")) + :" test expression folding + :fun Flvl() + let l = getline(v:lnum) +*** ../vim-7.2.369/src/testdir/test45.ok 2009-11-03 14:46:35.000000000 +0100 +--- src/testdir/test45.ok 2010-02-24 12:58:55.000000000 +0100 +*************** +*** 11,16 **** +--- 11,17 ---- + folding 9 ii + 3 cc + 7 gg ++ 8 hh + expr 2 + 1 + 2 +*** ../vim-7.2.369/src/version.c 2010-02-24 13:59:09.000000000 +0100 +--- src/version.c 2010-02-24 14:28:20.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 370, + /**/ + +-- +MAN: Fetchez la vache! +GUARD: Quoi? +MAN: Fetchez la vache! + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.371 b/source/ap/vim/patches/7.2.371 new file mode 100644 index 000000000..db875b624 --- /dev/null +++ b/source/ap/vim/patches/7.2.371 @@ -0,0 +1,322 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.371 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.371 +Problem: Build problems on Tandem NonStop. +Solution: A few changes to #ifdefs (Joachim Schmitz) +Files: src/auto/configure, src/configure.in, src/config.h.in, src/vim.h, + src/if_cscope.c, src/osdef1.h.in, src/tag.c + + +*** ../vim-7.2.370/src/auto/configure 2010-02-17 16:23:03.000000000 +0100 +--- src/auto/configure 2010-02-24 14:27:00.000000000 +0100 +*************** +*** 14038,14046 **** + + + +! +! +! for ac_func in bcmp fchdir fchown fseeko fsync ftello getcwd getpseudotty \ + getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \ + memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \ + setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \ +--- 14038,14044 ---- + + + +! for ac_func in bcmp fchdir fchown fsync getcwd getpseudotty \ + getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \ + memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \ + setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \ +*************** +*** 14146,14151 **** +--- 14144,14281 ---- + fi + done + ++ { $as_echo "$as_me:$LINENO: checking for _LARGEFILE_SOURCE value needed for large files" >&5 ++ $as_echo_n "checking for _LARGEFILE_SOURCE value needed for large files... " >&6; } ++ if test "${ac_cv_sys_largefile_source+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++ else ++ while :; do ++ cat >conftest.$ac_ext <<_ACEOF ++ /* confdefs.h. */ ++ _ACEOF ++ cat confdefs.h >>conftest.$ac_ext ++ cat >>conftest.$ac_ext <<_ACEOF ++ /* end confdefs.h. */ ++ #include <sys/types.h> /* for off_t */ ++ #include <stdio.h> ++ int ++ main () ++ { ++ int (*fp) (FILE *, off_t, int) = fseeko; ++ return fseeko (stdin, 0, 0) && fp (stdin, 0, 0); ++ ; ++ return 0; ++ } ++ _ACEOF ++ rm -f conftest.$ac_objext conftest$ac_exeext ++ if { (ac_try="$ac_link" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then ++ ac_cv_sys_largefile_source=no; break ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++ fi ++ ++ rm -rf conftest.dSYM ++ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ cat >conftest.$ac_ext <<_ACEOF ++ /* confdefs.h. */ ++ _ACEOF ++ cat confdefs.h >>conftest.$ac_ext ++ cat >>conftest.$ac_ext <<_ACEOF ++ /* end confdefs.h. */ ++ #define _LARGEFILE_SOURCE 1 ++ #include <sys/types.h> /* for off_t */ ++ #include <stdio.h> ++ int ++ main () ++ { ++ int (*fp) (FILE *, off_t, int) = fseeko; ++ return fseeko (stdin, 0, 0) && fp (stdin, 0, 0); ++ ; ++ return 0; ++ } ++ _ACEOF ++ rm -f conftest.$ac_objext conftest$ac_exeext ++ if { (ac_try="$ac_link" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then ++ ac_cv_sys_largefile_source=1; break ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++ fi ++ ++ rm -rf conftest.dSYM ++ rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_cv_sys_largefile_source=unknown ++ break ++ done ++ fi ++ { $as_echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_source" >&5 ++ $as_echo "$ac_cv_sys_largefile_source" >&6; } ++ case $ac_cv_sys_largefile_source in #( ++ no | unknown) ;; ++ *) ++ cat >>confdefs.h <<_ACEOF ++ #define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source ++ _ACEOF ++ ;; ++ esac ++ rm -rf conftest* ++ ++ # We used to try defining _XOPEN_SOURCE=500 too, to work around a bug ++ # in glibc 2.1.3, but that breaks too many other things. ++ # If you want fseeko and ftello with glibc, upgrade to a fixed glibc. ++ if test $ac_cv_sys_largefile_source != unknown; then ++ ++ cat >>confdefs.h <<\_ACEOF ++ #define HAVE_FSEEKO 1 ++ _ACEOF ++ ++ fi ++ + + { $as_echo "$as_me:$LINENO: checking for st_blksize" >&5 + $as_echo_n "checking for st_blksize... " >&6; } +*** ../vim-7.2.370/src/configure.in 2010-02-17 16:23:03.000000000 +0100 +--- src/configure.in 2010-02-24 14:18:49.000000000 +0100 +*************** +*** 2642,2655 **** + AC_DEFINE(BAD_GETCWD) + fi + +! dnl Check for functions in one big call, to reduce the size of configure +! AC_CHECK_FUNCS(bcmp fchdir fchown fseeko fsync ftello getcwd getpseudotty \ + getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \ + memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \ + setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \ + sigvec strcasecmp strerror strftime stricmp strncasecmp \ + strnicmp strpbrk strtol tgetent towlower towupper iswupper \ + usleep utime utimes) + + dnl fstatfs() can take 2 to 4 arguments, try to use st_blksize if possible + AC_MSG_CHECKING(for st_blksize) +--- 2642,2657 ---- + AC_DEFINE(BAD_GETCWD) + fi + +! dnl Check for functions in one big call, to reduce the size of configure. +! dnl Can only be used for functions that do not require any include. +! AC_CHECK_FUNCS(bcmp fchdir fchown fsync getcwd getpseudotty \ + getpwnam getpwuid getrlimit gettimeofday getwd lstat memcmp \ + memset mkdtemp nanosleep opendir putenv qsort readlink select setenv \ + setpgid setsid sigaltstack sigstack sigset sigsetjmp sigaction \ + sigvec strcasecmp strerror strftime stricmp strncasecmp \ + strnicmp strpbrk strtol tgetent towlower towupper iswupper \ + usleep utime utimes) ++ AC_FUNC_FSEEKO + + dnl fstatfs() can take 2 to 4 arguments, try to use st_blksize if possible + AC_MSG_CHECKING(for st_blksize) +*** ../vim-7.2.370/src/config.h.in 2009-11-17 17:13:03.000000000 +0100 +--- src/config.h.in 2010-02-24 14:20:26.000000000 +0100 +*************** +*** 144,150 **** + #undef HAVE_FCHOWN + #undef HAVE_FSEEKO + #undef HAVE_FSYNC +- #undef HAVE_FTELLO + #undef HAVE_GETCWD + #undef HAVE_GETPSEUDOTTY + #undef HAVE_GETPWNAM +--- 144,149 ---- +*** ../vim-7.2.370/src/vim.h 2010-02-03 15:14:15.000000000 +0100 +--- src/vim.h 2010-02-24 14:08:14.000000000 +0100 +*************** +*** 52,58 **** + + /* user ID of root is usually zero, but not for everybody */ + #ifdef __TANDEM +! # define _TANDEM_SOURCE + # include <floss.h> + # define ROOT_UID 65535 + #else +--- 52,60 ---- + + /* user ID of root is usually zero, but not for everybody */ + #ifdef __TANDEM +! # ifndef _TANDEM_SOURCE +! # define _TANDEM_SOURCE +! # endif + # include <floss.h> + # define ROOT_UID 65535 + #else +*** ../vim-7.2.370/src/if_cscope.c 2010-01-19 14:59:14.000000000 +0100 +--- src/if_cscope.c 2010-02-24 14:10:21.000000000 +0100 +*************** +*** 2278,2284 **** +--- 2278,2288 ---- + /* Use sigaction() to limit the waiting time to two seconds. */ + sigemptyset(&sa.sa_mask); + sa.sa_handler = sig_handler; ++ # ifdef SA_NODEFER + sa.sa_flags = SA_NODEFER; ++ # else ++ sa.sa_flags = 0; ++ # endif + sigaction(SIGALRM, &sa, &old); + alarm(2); /* 2 sec timeout */ + +*** ../vim-7.2.370/src/osdef1.h.in 2007-02-27 16:47:59.000000000 +0100 +--- src/osdef1.h.in 2010-02-24 14:20:50.000000000 +0100 +*************** +*** 25,31 **** + extern int fseeko __ARGS((FILE *, off_t, int)); + #endif + extern long ftell __ARGS((FILE *)); +! #ifdef HAVE_FTELLO + extern off_t ftello __ARGS((FILE *)); + #endif + extern void rewind __ARGS((FILE *)); +--- 25,31 ---- + extern int fseeko __ARGS((FILE *, off_t, int)); + #endif + extern long ftell __ARGS((FILE *)); +! #ifdef HAVE_FSEEKO + extern off_t ftello __ARGS((FILE *)); + #endif + extern void rewind __ARGS((FILE *)); +*** ../vim-7.2.370/src/tag.c 2009-05-17 13:30:58.000000000 +0200 +--- src/tag.c 2010-02-24 14:20:12.000000000 +0100 +*************** +*** 90,97 **** + /* + * We use ftello() here, if available. It returns off_t instead of long, + * which helps if long is 32 bit and off_t is 64 bit. + */ +! #ifdef HAVE_FTELLO + # define ftell ftello + #endif + +--- 90,98 ---- + /* + * We use ftello() here, if available. It returns off_t instead of long, + * which helps if long is 32 bit and off_t is 64 bit. ++ * We assume that when fseeko() is available then ftello() is too. + */ +! #ifdef HAVE_FSEEKO + # define ftell ftello + #endif + +*** ../vim-7.2.370/src/version.c 2010-02-24 14:34:10.000000000 +0100 +--- src/version.c 2010-02-24 14:45:37.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 371, + /**/ + +-- + A cow comes flying over the battlements, lowing aggressively. The cow + lands on GALAHAD'S PAGE, squashing him completely. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.372 b/source/ap/vim/patches/7.2.372 new file mode 100644 index 000000000..064893c81 --- /dev/null +++ b/source/ap/vim/patches/7.2.372 @@ -0,0 +1,303 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.372 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.372 (extra) +Problem: Cross-compiling GvimExt and xxd doesn't work. +Solution: Change the build files. (Markus Heidelberg) +Files: src/INSTALLpc.txt, src/GvimExt/Make_ming.mak, src/Make_cyg.mak, + src/Make_ming.mak, src/xxd/Make_cyg.mak + + +*** ../vim-7.2.371/src/INSTALLpc.txt 2008-07-13 19:20:53.000000000 +0200 +--- src/INSTALLpc.txt 2010-01-19 12:37:03.000000000 +0100 +*************** +*** 215,222 **** + + You should not need to do *any* editing of any files to get vim compiled this + way. If, for some reason, you want the console-mode-only version of vim (this +! is NOT recommended on Win32, especially on '95/'98!!!), you need only change +! the 'gvim.exe' to 'vim.exe' in the 'make' commands given above. + + If you are dismayed by how big the EXE is, I strongly recommend you get 'UPX' + (also free!) and compress the file (typical compression is 50%). UPX can be +--- 215,223 ---- + + You should not need to do *any* editing of any files to get vim compiled this + way. If, for some reason, you want the console-mode-only version of vim (this +! is NOT recommended on Win32, especially on '95/'98!!!), you can use: +! +! make -f Make_ming.mak GUI=no vim.exe + + If you are dismayed by how big the EXE is, I strongly recommend you get 'UPX' + (also free!) and compress the file (typical compression is 50%). UPX can be +*************** +*** 240,246 **** + The Cygnus one many not fully work yet. + With Cygnus gcc you can use the Unix Makefile instead (you need to get the + Unix archive then). Then you get a Cygwin application (feels like Vim is +! runnin on Unix), while with Make_cyg.mak you get a Windows application (like + with the other makefiles). + + +--- 241,247 ---- + The Cygnus one many not fully work yet. + With Cygnus gcc you can use the Unix Makefile instead (you need to get the + Unix archive then). Then you get a Cygwin application (feels like Vim is +! running on Unix), while with Make_cyg.mak you get a Windows application (like + with the other makefiles). + + +*************** +*** 259,268 **** +--- 260,272 ---- + If you like, you can compile the 'mingw' Win32 version from the comfort of + your Linux (or other unix) box. To do this, you need to follow a few steps: + 1) Install the mingw32 cross-compiler. See ++ http://www.mingw.org/wiki/LinuxCrossMinGW + http://www.libsdl.org/extras/win32/cross/README.txt + 2) Get and unpack both the Unix sources and the extra archive + 3) in 'Make_ming.mak', set 'CROSS' to 'yes' instead of 'no'. + Make further changes to 'Make_ming.mak' as you wish. ++ If your cross-compiler prefix differs from the predefined value, ++ set 'CROSS_COMPILE' corresponding. + 4) make -f Make_ming.mak gvim.exe + + Now you have created the Windows binary from your Linux box! Have fun... +*** ../vim-7.2.371/src/GvimExt/Make_ming.mak 2005-01-09 22:15:44.000000000 +0100 +--- src/GvimExt/Make_ming.mak 2010-02-24 14:56:37.000000000 +0100 +*************** +*** 20,36 **** + ifeq ($(CROSS),yes) + DEL = rm + ifeq ($(MINGWOLD),yes) +- CXX = i586-mingw32msvc-g++ + CXXFLAGS := -O2 -mno-cygwin -fvtable-thunks +- WINDRES = i586-mingw32msvc-windres + else +- CXX = i386-mingw32msvc-g++ + CXXFLAGS := -O2 -mno-cygwin +- WINDRES = i386-mingw32msvc-windres + endif + else +- CXX := g++ +- WINDRES := windres + CXXFLAGS := -O2 -mno-cygwin + ifneq (sh.exe, $(SHELL)) + DEL = rm +--- 20,30 ---- +*************** +*** 38,43 **** +--- 32,39 ---- + DEL = del + endif + endif ++ CXX := $(CROSS_COMPILE)g++ ++ WINDRES := $(CROSS_COMPILE)windres + LIBS := -luuid + RES := gvimext.res + DEFFILE = gvimext_ming.def +*** ../vim-7.2.371/src/Make_cyg.mak 2009-09-11 12:48:56.000000000 +0200 +--- src/Make_cyg.mak 2010-02-24 14:59:02.000000000 +0100 +*************** +*** 1,6 **** + # + # Makefile for VIM on Win32, using Cygnus gcc +! # Last updated by Dan Sharp. Last Change: 2007 Sep 29 + # + # Also read INSTALLpc.txt! + # +--- 1,6 ---- + # + # Makefile for VIM on Win32, using Cygnus gcc +! # Last updated by Dan Sharp. Last Change: 2010 Feb 24 + # + # Also read INSTALLpc.txt! + # +*************** +*** 32,40 **** + # OLE no or yes: set to yes to make OLE gvim (no) + # DEBUG no or yes: set to yes if you wish a DEBUGging build (no) + # CPUNR No longer supported, use ARCH. +! # ARCH i386 through pentium4: select -march argument to compile with (i386) + # USEDLL no or yes: set to yes to use the Runtime library DLL (no) + # For USEDLL=yes the cygwin1.dll is required to run Vim. + # POSTSCRIPT no or yes: set to yes for PostScript printing (no) + # FEATURES TINY, SMALL, NORMAL, BIG or HUGE (BIG) + # WINVER Lowest Win32 version to support. (0x0400) +--- 32,43 ---- + # OLE no or yes: set to yes to make OLE gvim (no) + # DEBUG no or yes: set to yes if you wish a DEBUGging build (no) + # CPUNR No longer supported, use ARCH. +! # ARCH i386 through pentium4: select -march argument to compile with +! # (i386) + # USEDLL no or yes: set to yes to use the Runtime library DLL (no) + # For USEDLL=yes the cygwin1.dll is required to run Vim. ++ # "no" does not work with latest version of Cygwin, use ++ # Make_ming.mak instead. Or set CC to gcc-3. + # POSTSCRIPT no or yes: set to yes for PostScript printing (no) + # FEATURES TINY, SMALL, NORMAL, BIG or HUGE (BIG) + # WINVER Lowest Win32 version to support. (0x0400) +*************** +*** 99,104 **** +--- 102,108 ---- + INCLUDES = -march=$(ARCH) -Iproto + + #>>>>> name of the compiler and linker, name of lib directory ++ CROSS_COMPILE = + CC = gcc + RC = windres + +*************** +*** 467,476 **** + $(CC) $(CFLAGS) -o $(EXE) $(OBJ) $(LIBS) -luuid -lole32 $(EXTRA_LIBS) + + xxd/xxd.exe: xxd/xxd.c +! $(MAKE) -C xxd -f Make_cyg.mak USEDLL=$(USEDLL) + + GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h +! $(MAKE) -C GvimExt -f Make_ming.mak + + vimrun.exe: vimrun.c + $(CC) $(CFLAGS) -o vimrun.exe vimrun.c $(LIBS) +--- 471,480 ---- + $(CC) $(CFLAGS) -o $(EXE) $(OBJ) $(LIBS) -luuid -lole32 $(EXTRA_LIBS) + + xxd/xxd.exe: xxd/xxd.c +! $(MAKE) -C xxd -f Make_cyg.mak CC=$(CC) USEDLL=$(USEDLL) + + GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h +! $(MAKE) -C GvimExt -f Make_ming.mak CROSS_COMPILE=$(CROSS_COMPILE) + + vimrun.exe: vimrun.c + $(CC) $(CFLAGS) -o vimrun.exe vimrun.c $(LIBS) +*** ../vim-7.2.371/src/Make_ming.mak 2009-09-11 12:48:56.000000000 +0200 +--- src/Make_ming.mak 2010-02-24 15:01:31.000000000 +0100 +*************** +*** 241,255 **** + DEFINES=-DWIN32 -DWINVER=$(WINVER) -D_WIN32_WINNT=$(WINVER) \ + -DHAVE_PATHDEF -DFEAT_$(FEATURES) + ifeq ($(CROSS),yes) +! # cross-compiler: +! CC = i586-pc-mingw32msvc-gcc + DEL = rm + MKDIR = mkdir -p +! WINDRES = i586-pc-mingw32msvc-windres + else + # normal (Windows) compilation: +- CC = gcc + ifneq (sh.exe, $(SHELL)) + DEL = rm + MKDIR = mkdir -p + DIRSLASH = / +--- 241,255 ---- + DEFINES=-DWIN32 -DWINVER=$(WINVER) -D_WIN32_WINNT=$(WINVER) \ + -DHAVE_PATHDEF -DFEAT_$(FEATURES) + ifeq ($(CROSS),yes) +! # cross-compiler prefix: +! CROSS_COMPILE = i586-pc-mingw32msvc- + DEL = rm + MKDIR = mkdir -p +! DIRSLASH = / + else + # normal (Windows) compilation: + ifneq (sh.exe, $(SHELL)) ++ CROSS_COMPILE = + DEL = rm + MKDIR = mkdir -p + DIRSLASH = / +*************** +*** 258,265 **** + MKDIR = mkdir + DIRSLASH = \\ + endif +- WINDRES = windres + endif + + #>>>>> end of choices + ########################################################################### +--- 258,266 ---- + MKDIR = mkdir + DIRSLASH = \\ + endif + endif ++ CC := $(CROSS_COMPILE)gcc ++ WINDRES := $(CROSS_COMPILE)windres + + #>>>>> end of choices + ########################################################################### +*************** +*** 549,558 **** + upx vim.exe + + xxd/xxd.exe: xxd/xxd.c +! $(MAKE) -C xxd -f Make_cyg.mak + + GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h + $(MAKE) -C GvimExt -f Make_ming.mak + + clean: + -$(DEL) $(OUTDIR)$(DIRSLASH)*.o +--- 550,560 ---- + upx vim.exe + + xxd/xxd.exe: xxd/xxd.c +! $(MAKE) -C xxd -f Make_cyg.mak CC=$(CC) + + GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h + $(MAKE) -C GvimExt -f Make_ming.mak ++ $(MAKE) -C GvimExt -f Make_ming.mak CROSS=$(CROSS) CROSS_COMPILE=$(CROSS_COMPILE) + + clean: + -$(DEL) $(OUTDIR)$(DIRSLASH)*.o +*** ../vim-7.2.371/src/xxd/Make_cyg.mak 2004-06-13 17:48:52.000000000 +0200 +--- src/xxd/Make_cyg.mak 2010-02-24 15:05:24.000000000 +0100 +*************** +*** 12,17 **** +--- 12,18 ---- + LIBS = + endif + ++ CC = gcc + CFLAGS = -O2 -Wall -DWIN32 $(DEFINES) + + ifneq (sh.exe, $(SHELL)) +*************** +*** 21,27 **** + endif + + xxd.exe: xxd.c +! gcc $(CFLAGS) -s -o xxd.exe xxd.c $(LIBS) + + clean: + -$(DEL) xxd.exe +--- 22,28 ---- + endif + + xxd.exe: xxd.c +! $(CC) $(CFLAGS) -s -o xxd.exe xxd.c $(LIBS) + + clean: + -$(DEL) xxd.exe +*** ../vim-7.2.371/src/version.c 2010-02-24 14:46:58.000000000 +0100 +--- src/version.c 2010-02-24 15:05:48.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 372, + /**/ + +-- +Ten bugs in the hand is better than one as yet undetected. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.373 b/source/ap/vim/patches/7.2.373 new file mode 100644 index 000000000..1bb4773d9 --- /dev/null +++ b/source/ap/vim/patches/7.2.373 @@ -0,0 +1,54 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.373 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.373 +Problem: Gcc 4.5 adds more error messages. (Chris Indy) +Solution: Update default 'errorformat'. +Files: src/option.h + + +*** ../vim-7.2.372/src/option.h 2008-06-24 23:59:49.000000000 +0200 +--- src/option.h 2010-02-24 15:20:03.000000000 +0100 +*************** +*** 33,39 **** + # ifdef EBCDIC + #define DFLT_EFM "%*[^ ] %*[^ ] %f:%l%*[ ]%m,%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m" + # else +! #define DFLT_EFM "%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%-G%f:%l: (Each undeclared identifier is reported only once,%-G%f:%l: for each function it appears in.),%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%D%*\\a: Entering directory `%f',%X%*\\a: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m" + # endif + # endif + # endif +--- 33,39 ---- + # ifdef EBCDIC + #define DFLT_EFM "%*[^ ] %*[^ ] %f:%l%*[ ]%m,%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m" + # else +! #define DFLT_EFM "%*[^\"]\"%f\"%*\\D%l: %m,\"%f\"%*\\D%l: %m,%-G%f:%l: (Each undeclared identifier is reported only once,%-G%f:%l: for each function it appears in.),%-GIn file included from %f:%l:%c,%-GIn file included from %f:%l,%-Gfrom %f:%l:%c,%-Gfrom %f:%l,%f:%l:%c:%m,%f(%l):%m,%f:%l:%m,\"%f\"\\, line %l%*\\D%c%*[^ ] %m,%D%*\\a[%*\\d]: Entering directory `%f',%X%*\\a[%*\\d]: Leaving directory `%f',%D%*\\a: Entering directory `%f',%X%*\\a: Leaving directory `%f',%DMaking %*\\a in %f,%f|%l| %m" + # endif + # endif + # endif +*** ../vim-7.2.372/src/version.c 2010-02-24 15:07:45.000000000 +0100 +--- src/version.c 2010-02-24 15:24:43.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 373, + /**/ + +-- +ARTHUR: Right! Knights! Forward! + ARTHUR leads a charge toward the castle. Various shots of them battling on, + despite being hit by a variety of farm animals. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.374 b/source/ap/vim/patches/7.2.374 new file mode 100644 index 000000000..50d3e74d2 --- /dev/null +++ b/source/ap/vim/patches/7.2.374 @@ -0,0 +1,168 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.374 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.374 +Problem: Ruby eval() doesn't understand Vim types. +Solution: Add the vim_to_ruby() function. (George Gensure) +Files: src/eval.c, src/if_ruby.c + + +*** ../vim-7.2.373/src/eval.c 2010-01-19 15:51:29.000000000 +0100 +--- src/eval.c 2010-02-24 15:36:40.000000000 +0100 +*************** +*** 5872,5878 **** + return item1 == NULL && item2 == NULL; + } + +! #if defined(FEAT_PYTHON) || defined(FEAT_MZSCHEME) || defined(PROTO) + /* + * Return the dictitem that an entry in a hashtable points to. + */ +--- 5872,5879 ---- + return item1 == NULL && item2 == NULL; + } + +! #if defined(FEAT_RUBY) || defined(FEAT_PYTHON) || defined(FEAT_MZSCHEME) \ +! || defined(PROTO) + /* + * Return the dictitem that an entry in a hashtable points to. + */ +*** ../vim-7.2.373/src/if_ruby.c 2010-02-18 15:51:25.000000000 +0100 +--- src/if_ruby.c 2010-02-24 15:45:15.000000000 +0100 +*************** +*** 660,679 **** + return Qnil; + } + + static VALUE vim_evaluate(VALUE self UNUSED, VALUE str) + { + #ifdef FEAT_EVAL +! char_u *value = eval_to_string((char_u *)StringValuePtr(str), NULL, TRUE); + +! if (value != NULL) + { +! VALUE val = rb_str_new2((char *)value); +! vim_free(value); +! return val; + } +! else + #endif +- return Qnil; + } + + static VALUE buffer_new(buf_T *buf) +--- 660,747 ---- + return Qnil; + } + ++ #ifdef FEAT_EVAL ++ static VALUE vim_to_ruby(typval_T *tv) ++ { ++ VALUE result = Qnil; ++ ++ if (tv->v_type == VAR_STRING) ++ { ++ result = rb_str_new2((char *)tv->vval.v_string); ++ } ++ else if (tv->v_type == VAR_NUMBER) ++ { ++ result = INT2NUM(tv->vval.v_number); ++ } ++ # ifdef FEAT_FLOAT ++ else if (tv->v_type == VAR_FLOAT) ++ { ++ result = rb_float_new(tv->vval.v_float); ++ } ++ # endif ++ else if (tv->v_type == VAR_LIST) ++ { ++ list_T *list = tv->vval.v_list; ++ listitem_T *curr; ++ ++ result = rb_ary_new(); ++ ++ if (list != NULL) ++ { ++ for (curr = list->lv_first; curr != NULL; curr = curr->li_next) ++ { ++ rb_ary_push(result, vim_to_ruby(&curr->li_tv)); ++ } ++ } ++ } ++ else if (tv->v_type == VAR_DICT) ++ { ++ result = rb_hash_new(); ++ ++ if (tv->vval.v_dict != NULL) ++ { ++ hashtab_T *ht = &tv->vval.v_dict->dv_hashtab; ++ long_u todo = ht->ht_used; ++ hashitem_T *hi; ++ dictitem_T *di; ++ ++ for (hi = ht->ht_array; todo > 0; ++hi) ++ { ++ if (!HASHITEM_EMPTY(hi)) ++ { ++ --todo; ++ ++ di = dict_lookup(hi); ++ rb_hash_aset(result, rb_str_new2((char *)hi->hi_key), ++ vim_to_ruby(&di->di_tv)); ++ } ++ } ++ } ++ } /* else return Qnil; */ ++ ++ return result; ++ } ++ #endif ++ + static VALUE vim_evaluate(VALUE self UNUSED, VALUE str) + { + #ifdef FEAT_EVAL +! typval_T *tv; +! VALUE result; + +! tv = eval_expr((char_u *)StringValuePtr(str), NULL); +! if (tv == NULL) + { +! return Qnil; + } +! result = vim_to_ruby(tv); +! +! free_tv(tv); +! +! return result; +! #else +! return Qnil; + #endif + } + + static VALUE buffer_new(buf_T *buf) +*** ../vim-7.2.373/src/version.c 2010-02-24 15:25:13.000000000 +0100 +--- src/version.c 2010-02-24 15:46:57.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 374, + /**/ + +-- +ARTHUR: (as the MAN next to him is squashed by a sheep) Knights! Run away! + Midst echoing shouts of "run away" the KNIGHTS retreat to cover with the odd + cow or goose hitting them still. The KNIGHTS crouch down under cover. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.375 b/source/ap/vim/patches/7.2.375 new file mode 100644 index 000000000..3374cd1b8 --- /dev/null +++ b/source/ap/vim/patches/7.2.375 @@ -0,0 +1,64 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.375 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.375 +Problem: ml_get errors when using ":bprevious" in a BufEnter autocmd. + (Dominique Pelle) +Solution: Clear w_valid when entering another buffer. +Files: src/buffer.c + + +*** ../vim-7.2.374/src/buffer.c 2010-01-19 14:59:14.000000000 +0100 +--- src/buffer.c 2010-02-24 16:29:22.000000000 +0100 +*************** +*** 115,121 **** + #endif + + /* mark cursor position as being invalid */ +! changed_line_abv_curs(); + + if (curbuf->b_ffname != NULL + #ifdef FEAT_NETBEANS_INTG +--- 115,121 ---- + #endif + + /* mark cursor position as being invalid */ +! curwin->w_valid = 0; + + if (curbuf->b_ffname != NULL + #ifdef FEAT_NETBEANS_INTG +*************** +*** 1399,1404 **** +--- 1399,1407 ---- + curwin->w_topline_was_set = FALSE; + #endif + ++ /* mark cursor position as being invalid */ ++ curwin->w_valid = 0; ++ + /* Make sure the buffer is loaded. */ + if (curbuf->b_ml.ml_mfp == NULL) /* need to load the file */ + { +*** ../vim-7.2.374/src/version.c 2010-02-24 15:47:58.000000000 +0100 +--- src/version.c 2010-02-24 16:30:03.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 375, + /**/ + +-- +Error:015 - Unable to exit Windows. Try the door. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.376 b/source/ap/vim/patches/7.2.376 new file mode 100644 index 000000000..718875b26 --- /dev/null +++ b/source/ap/vim/patches/7.2.376 @@ -0,0 +1,50 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.376 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.376 +Problem: ml_get error when using SiSU syntax. (Nathan Thomas) +Solution: If the match ends below the last line move it to the end of the + last line. +Files: src/syntax.c + + +*** ../vim-7.2.375/src/syntax.c 2010-01-19 14:59:14.000000000 +0100 +--- src/syntax.c 2010-02-24 17:14:13.000000000 +0100 +*************** +*** 3086,3091 **** +--- 3086,3097 ---- + col = regmatch->startpos[0].col; + off = spp->sp_offsets[idx]; + } ++ if (result->lnum > syn_buf->b_ml.ml_line_count) ++ { ++ /* a "\n" at the end of the pattern may take us below the last line */ ++ result->lnum = syn_buf->b_ml.ml_line_count; ++ col = STRLEN(ml_get_buf(syn_buf, result->lnum, FALSE)); ++ } + if (off != 0) + { + base = ml_get_buf(syn_buf, result->lnum, FALSE); +*** ../vim-7.2.375/src/version.c 2010-02-24 16:58:30.000000000 +0100 +--- src/version.c 2010-02-24 17:15:48.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 376, + /**/ + +-- +press CTRL-ALT-DEL for more information + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.377 b/source/ap/vim/patches/7.2.377 new file mode 100644 index 000000000..e854ce717 --- /dev/null +++ b/source/ap/vim/patches/7.2.377 @@ -0,0 +1,66 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.377 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.377 (extra, after 7.2.372) +Problem: Misplaced assignment. Duplicate build line for gvimext.dll. +Solution: Move setting CROSS_COMPILE to before ifneq. Remove the wrong + build line. (Markus Heidelberg) +Files: src/Make_ming.mak + + +*** ../vim-7.2.376/src/Make_ming.mak 2010-02-24 15:07:45.000000000 +0100 +--- src/Make_ming.mak 2010-02-26 22:01:07.000000000 +0100 +*************** +*** 248,255 **** + DIRSLASH = / + else + # normal (Windows) compilation: +- ifneq (sh.exe, $(SHELL)) + CROSS_COMPILE = + DEL = rm + MKDIR = mkdir -p + DIRSLASH = / +--- 248,255 ---- + DIRSLASH = / + else + # normal (Windows) compilation: + CROSS_COMPILE = ++ ifneq (sh.exe, $(SHELL)) + DEL = rm + MKDIR = mkdir -p + DIRSLASH = / +*************** +*** 553,559 **** + $(MAKE) -C xxd -f Make_cyg.mak CC=$(CC) + + GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h +- $(MAKE) -C GvimExt -f Make_ming.mak + $(MAKE) -C GvimExt -f Make_ming.mak CROSS=$(CROSS) CROSS_COMPILE=$(CROSS_COMPILE) + + clean: +--- 553,558 ---- +*** ../vim-7.2.376/src/version.c 2010-02-24 17:22:14.000000000 +0100 +--- src/version.c 2010-02-26 22:01:45.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 377, + /**/ + +-- +FIRST HEAD: All right! All right! We'll kill him first and then have tea and + biscuits. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.378 b/source/ap/vim/patches/7.2.378 new file mode 100644 index 000000000..de2251f44 --- /dev/null +++ b/source/ap/vim/patches/7.2.378 @@ -0,0 +1,69 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.378 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.378 +Problem: C function declaration indented too much. (Rui) +Solution: Don't see a line containing { or } as a type. (Matt Wozniski) +Files: src/misc1.c + + +*** ../vim-7.2.377/src/misc1.c 2010-01-06 17:46:03.000000000 +0100 +--- src/misc1.c 2010-02-26 22:36:50.000000000 +0100 +*************** +*** 7727,7737 **** + /* + * If the NEXT line is a function declaration, the current + * line needs to be indented as a function type spec. +! * Don't do this if the current line looks like a comment +! * or if the current line is terminated, ie. ends in ';'. + */ + else if (cur_curpos.lnum < curbuf->b_ml.ml_line_count + && !cin_nocode(theline) + && !cin_ends_in(theline, (char_u *)":", NULL) + && !cin_ends_in(theline, (char_u *)",", NULL) + && cin_isfuncdecl(NULL, cur_curpos.lnum + 1) +--- 7727,7740 ---- + /* + * If the NEXT line is a function declaration, the current + * line needs to be indented as a function type spec. +! * Don't do this if the current line looks like a comment or if the +! * current line is terminated, ie. ends in ';', or if the current line +! * contains { or }: "void f() {\n if (1)" + */ + else if (cur_curpos.lnum < curbuf->b_ml.ml_line_count + && !cin_nocode(theline) ++ && vim_strchr(theline, '{') == NULL ++ && vim_strchr(theline, '}') == NULL + && !cin_ends_in(theline, (char_u *)":", NULL) + && !cin_ends_in(theline, (char_u *)",", NULL) + && cin_isfuncdecl(NULL, cur_curpos.lnum + 1) +*** ../vim-7.2.377/src/version.c 2010-02-26 22:05:17.000000000 +0100 +--- src/version.c 2010-03-02 12:30:30.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 378, + /**/ + +-- + An extraordinary TALL KNIGHT in all black (possibly John with Mike on his + shoulders) walks out from the dark trees. He is extremely fierce and + gruesome countenance. He walks towards KING ARTHUR and PATSY, who are + wazzing like mad. (Salopian slang, meaning very scared. almost to the + point of wetting oneself, e.g. before an important football match or + prior to a postering. Salopian slang meaning a beating by the school + praeposters. Sorry about the Salopian slant to this stage direction - Ed.) + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.379 b/source/ap/vim/patches/7.2.379 new file mode 100644 index 000000000..8a600e9eb --- /dev/null +++ b/source/ap/vim/patches/7.2.379 @@ -0,0 +1,55 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.379 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.379 +Problem: 'eventignore' is set to an invalid value inside ":doau". (Antony + Scriven) +Solution: Don't include the leading comma when the option was empty. +Files: src/fileio.c + + +*** ../vim-7.2.378/src/fileio.c 2010-01-19 14:59:14.000000000 +0100 +--- src/fileio.c 2010-03-01 21:01:04.000000000 +0100 +*************** +*** 7925,7931 **** + new_ei = vim_strnsave(p_ei, (int)(STRLEN(p_ei) + STRLEN(what))); + if (new_ei != NULL) + { +! STRCAT(new_ei, what); + set_string_option_direct((char_u *)"ei", -1, new_ei, + OPT_FREE, SID_NONE); + vim_free(new_ei); +--- 7925,7934 ---- + new_ei = vim_strnsave(p_ei, (int)(STRLEN(p_ei) + STRLEN(what))); + if (new_ei != NULL) + { +! if (*what == ',' && *p_ei == NUL) +! STRCPY(new_ei, what + 1); +! else +! STRCAT(new_ei, what); + set_string_option_direct((char_u *)"ei", -1, new_ei, + OPT_FREE, SID_NONE); + vim_free(new_ei); +*** ../vim-7.2.378/src/version.c 2010-03-02 12:37:01.000000000 +0100 +--- src/version.c 2010-03-02 12:46:45.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 379, + /**/ + +-- +Back up my hard drive? I can't find the reverse switch! + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.380 b/source/ap/vim/patches/7.2.380 new file mode 100644 index 000000000..2cdd8318e --- /dev/null +++ b/source/ap/vim/patches/7.2.380 @@ -0,0 +1,104 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.380 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.380 (after 7.2.363) +Problem: Perl interface builds with 5.10.1 but not with 5.10.0. +Solution: Change the #ifdefs. (Sergey Khorev) +Files: src/if_perl.xs + + +*** ../vim-7.2.379/src/if_perl.xs 2010-02-17 16:40:47.000000000 +0100 +--- src/if_perl.xs 2010-03-02 15:07:01.000000000 +0100 +*************** +*** 62,67 **** +--- 62,72 ---- + # define PERL589_OR_LATER + #endif + ++ #if (PERL_REVISION == 5) && ((PERL_VERSION > 10) || \ ++ (PERL_VERSION == 10) && (PERL_SUBVERSION >= 1)) ++ # define PERL5101_OR_LATER ++ #endif ++ + #ifndef pTHX + # define pTHX void + # define pTHX_ +*************** +*** 93,99 **** + # define perl_free dll_perl_free + # define Perl_get_context dll_Perl_get_context + # define Perl_croak dll_Perl_croak +! # if (PERL_REVISION == 5) && (PERL_VERSION >= 10) + # define Perl_croak_xs_usage dll_Perl_croak_xs_usage + # endif + # ifndef PROTO +--- 98,104 ---- + # define perl_free dll_perl_free + # define Perl_get_context dll_Perl_get_context + # define Perl_croak dll_Perl_croak +! # ifdef PERL5101_OR_LATER + # define Perl_croak_xs_usage dll_Perl_croak_xs_usage + # endif + # ifndef PROTO +*************** +*** 205,211 **** + static int (*perl_parse)(PerlInterpreter*, XSINIT_t, int, char**, char**); + static void* (*Perl_get_context)(void); + static void (*Perl_croak)(pTHX_ const char*, ...); +! #if (PERL_REVISION == 5) && (PERL_VERSION >= 10) + static void (*Perl_croak_xs_usage)(pTHX_ const CV *const, const char *const params); + #endif + static void (*Perl_croak_nocontext)(const char*, ...); +--- 210,216 ---- + static int (*perl_parse)(PerlInterpreter*, XSINIT_t, int, char**, char**); + static void* (*Perl_get_context)(void); + static void (*Perl_croak)(pTHX_ const char*, ...); +! #ifdef PERL5101_OR_LATER + static void (*Perl_croak_xs_usage)(pTHX_ const CV *const, const char *const params); + #endif + static void (*Perl_croak_nocontext)(const char*, ...); +*************** +*** 312,318 **** + {"perl_parse", (PERL_PROC*)&perl_parse}, + {"Perl_get_context", (PERL_PROC*)&Perl_get_context}, + {"Perl_croak", (PERL_PROC*)&Perl_croak}, +! #if (PERL_REVISION == 5) && (PERL_VERSION >= 10) + {"Perl_croak_xs_usage", (PERL_PROC*)&Perl_croak_xs_usage}, + #endif + {"Perl_croak_nocontext", (PERL_PROC*)&Perl_croak_nocontext}, +--- 317,323 ---- + {"perl_parse", (PERL_PROC*)&perl_parse}, + {"Perl_get_context", (PERL_PROC*)&Perl_get_context}, + {"Perl_croak", (PERL_PROC*)&Perl_croak}, +! #ifdef PERL5101_OR_LATER + {"Perl_croak_xs_usage", (PERL_PROC*)&Perl_croak_xs_usage}, + #endif + {"Perl_croak_nocontext", (PERL_PROC*)&Perl_croak_nocontext}, +*** ../vim-7.2.379/src/version.c 2010-03-02 12:47:58.000000000 +0100 +--- src/version.c 2010-03-02 15:13:21.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 380, + /**/ + +-- +FATHER: Make sure the Prince doesn't leave this room until I come and + get him. +FIRST GUARD: Not ... to leave the room ... even if you come and get him. +FATHER: No. Until I come and get him. +SECOND GUARD: Hic. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.381 b/source/ap/vim/patches/7.2.381 new file mode 100644 index 000000000..977a8ecd5 --- /dev/null +++ b/source/ap/vim/patches/7.2.381 @@ -0,0 +1,218 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.381 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.381 +Problem: No completion for :behave. +Solution: Add :behave completion. Minor related fixes. (Dominique Pelle) +Files: src/ex_docmd.c, src/ex_getln.c, src/proto/ex_docmd.pro, src/vim.h + + +*** ../vim-7.2.380/src/ex_docmd.c 2010-02-03 15:14:15.000000000 +0100 +--- src/ex_docmd.c 2010-03-02 15:55:05.000000000 +0100 +*************** +*** 26,35 **** + long_u uc_argt; /* The argument type */ + char_u *uc_rep; /* The command's replacement string */ + long uc_def; /* The default value for a range/count */ +- scid_T uc_scriptID; /* SID where the command was defined */ + int uc_compl; /* completion type */ +! # if defined(FEAT_EVAL) && defined(FEAT_CMDL_COMPL) + char_u *uc_compl_arg; /* completion argument if any */ + # endif + } ucmd_T; + +--- 26,37 ---- + long_u uc_argt; /* The argument type */ + char_u *uc_rep; /* The command's replacement string */ + long uc_def; /* The default value for a range/count */ + int uc_compl; /* completion type */ +! # ifdef FEAT_EVAL +! scid_T uc_scriptID; /* SID where the command was defined */ +! # ifdef FEAT_CMDL_COMPL + char_u *uc_compl_arg; /* completion argument if any */ ++ # endif + # endif + } ucmd_T; + +*************** +*** 3156,3172 **** + return NULL; + } + for (ea.cmdidx = (cmdidx_T)0; (int)ea.cmdidx < (int)CMD_SIZE; +! ea.cmdidx = (cmdidx_T)((int)ea.cmdidx + 1)) +! if (STRNCMP(cmdnames[(int)ea.cmdidx].cmd_name, cmd, (size_t)len) == 0) + break; + + #ifdef FEAT_USR_CMDS + if (cmd[0] >= 'A' && cmd[0] <= 'Z') +- { + while (ASCII_ISALNUM(*p) || *p == '*') /* Allow * wild card */ + ++p; +- len = (int)(p - cmd); +- } + #endif + } + +--- 3158,3172 ---- + return NULL; + } + for (ea.cmdidx = (cmdidx_T)0; (int)ea.cmdidx < (int)CMD_SIZE; +! ea.cmdidx = (cmdidx_T)((int)ea.cmdidx + 1)) +! if (STRNCMP(cmdnames[(int)ea.cmdidx].cmd_name, cmd, +! (size_t)len) == 0) + break; + + #ifdef FEAT_USR_CMDS + if (cmd[0] >= 'A' && cmd[0] <= 'Z') + while (ASCII_ISALNUM(*p) || *p == '*') /* Allow * wild card */ + ++p; + #endif + } + +*************** +*** 3809,3814 **** +--- 3809,3817 ---- + set_context_in_profile_cmd(xp, arg); + break; + #endif ++ case CMD_behave: ++ xp->xp_context = EXPAND_BEHAVE; ++ break; + + #endif /* FEAT_CMDL_COMPL */ + +*************** +*** 10847,10852 **** +--- 10850,10873 ---- + EMSG2(_(e_invarg2), eap->arg); + } + ++ #if defined(FEAT_CMDL_COMPL) || defined(PROTO) ++ /* ++ * Function given to ExpandGeneric() to obtain the possible arguments of the ++ * ":behave {mswin,xterm}" command. ++ */ ++ char_u * ++ get_behave_arg(xp, idx) ++ expand_T *xp UNUSED; ++ int idx; ++ { ++ if (idx == 0) ++ return (char_u *)"mswin"; ++ if (idx == 1) ++ return (char_u *)"xterm"; ++ return NULL; ++ } ++ #endif ++ + #ifdef FEAT_AUTOCMD + static int filetype_detect = FALSE; + static int filetype_plugin = FALSE; +*** ../vim-7.2.380/src/ex_getln.c 2010-02-03 15:14:15.000000000 +0100 +--- src/ex_getln.c 2010-03-02 15:28:13.000000000 +0100 +*************** +*** 4492,4497 **** +--- 4492,4498 ---- + } tab[] = + { + {EXPAND_COMMANDS, get_command_name, FALSE}, ++ {EXPAND_BEHAVE, get_behave_arg, TRUE}, + #ifdef FEAT_USR_CMDS + {EXPAND_USER_COMMANDS, get_user_commands, FALSE}, + {EXPAND_USER_CMD_FLAGS, get_user_cmd_flags, FALSE}, +*** ../vim-7.2.380/src/proto/ex_docmd.pro 2008-07-04 11:43:13.000000000 +0200 +--- src/proto/ex_docmd.pro 2010-03-02 15:37:37.000000000 +0100 +*************** +*** 52,55 **** +--- 52,56 ---- + int put_eol __ARGS((FILE *fd)); + int put_line __ARGS((FILE *fd, char *s)); + void dialog_msg __ARGS((char_u *buff, char *format, char_u *fname)); ++ char_u *get_behave_arg __ARGS((expand_T *xp, int idx)); + /* vim: set ft=c : */ +*** ../vim-7.2.380/src/vim.h 2010-02-24 14:46:58.000000000 +0100 +--- src/vim.h 2010-03-02 15:30:13.000000000 +0100 +*************** +*** 595,601 **** + + /* + * Terminal highlighting attribute bits. +! * Attibutes above HL_ALL are used for syntax highlighting. + */ + #define HL_NORMAL 0x00 + #define HL_INVERSE 0x01 +--- 595,601 ---- + + /* + * Terminal highlighting attribute bits. +! * Attributes above HL_ALL are used for syntax highlighting. + */ + #define HL_NORMAL 0x00 + #define HL_INVERSE 0x01 +*************** +*** 721,726 **** +--- 721,727 ---- + #define EXPAND_CSCOPE 33 + #define EXPAND_SIGN 34 + #define EXPAND_PROFILE 35 ++ #define EXPAND_BEHAVE 36 + + /* Values for exmode_active (0 is no exmode) */ + #define EXMODE_NORMAL 1 +*************** +*** 1262,1268 **** + } hlf_T; + + /* The HL_FLAGS must be in the same order as the HLF_ enums! +! * When chainging this also adjust the default for 'highlight'. */ + #define HL_FLAGS {'8', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \ + 'n', 'r', 's', 'S', 'c', 't', 'v', 'V', 'w', 'W', \ + 'f', 'F', 'A', 'C', 'D', 'T', '>', \ +--- 1263,1269 ---- + } hlf_T; + + /* The HL_FLAGS must be in the same order as the HLF_ enums! +! * When changing this also adjust the default for 'highlight'. */ + #define HL_FLAGS {'8', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \ + 'n', 'r', 's', 'S', 'c', 't', 'v', 'V', 'w', 'W', \ + 'f', 'F', 'A', 'C', 'D', 'T', '>', \ +*************** +*** 1430,1436 **** + #ifdef FEAT_MBYTE + /* We need to call mb_stricmp() even when we aren't dealing with a multi-byte + * encoding because mb_stricmp() takes care of all ascii and non-ascii +! * encodings, including characters with umluats in latin1, etc., while + * STRICMP() only handles the system locale version, which often does not + * handle non-ascii properly. */ + +--- 1431,1437 ---- + #ifdef FEAT_MBYTE + /* We need to call mb_stricmp() even when we aren't dealing with a multi-byte + * encoding because mb_stricmp() takes care of all ascii and non-ascii +! * encodings, including characters with umlauts in latin1, etc., while + * STRICMP() only handles the system locale version, which often does not + * handle non-ascii properly. */ + +*** ../vim-7.2.380/src/version.c 2010-03-02 15:14:22.000000000 +0100 +--- src/version.c 2010-03-02 15:51:24.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 381, + /**/ + +-- +I'd like to meet the man who invented sex and see what he's working on now. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.382 b/source/ap/vim/patches/7.2.382 new file mode 100644 index 000000000..56fcfa44d --- /dev/null +++ b/source/ap/vim/patches/7.2.382 @@ -0,0 +1,58 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.382 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.382 +Problem: Accessing freed memory when closing the cmdline window when + 'bufhide' is set to "wipe". +Solution: Check if the buffer still exists before invoking close_buffer() + (Dominique Pelle) +Files: src/ex_getln.c + + +*** ../vim-7.2.381/src/ex_getln.c 2010-03-02 15:55:51.000000000 +0100 +--- src/ex_getln.c 2010-03-02 16:29:38.000000000 +0100 +*************** +*** 6252,6258 **** + bp = curbuf; + win_goto(old_curwin); + win_close(wp, TRUE); +! close_buffer(NULL, bp, DOBUF_WIPE); + + /* Restore window sizes. */ + win_size_restore(&winsizes); +--- 6252,6262 ---- + bp = curbuf; + win_goto(old_curwin); + win_close(wp, TRUE); +! +! /* win_close() may have already wiped the buffer when 'bh' is +! * set to 'wipe' */ +! if (buf_valid(bp)) +! close_buffer(NULL, bp, DOBUF_WIPE); + + /* Restore window sizes. */ + win_size_restore(&winsizes); +*** ../vim-7.2.381/src/version.c 2010-03-02 15:55:51.000000000 +0100 +--- src/version.c 2010-03-02 17:22:11.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 382, + /**/ + +-- +You had connectors? Eeee, when I were a lad we 'ad to carry the +bits between the computer and the terminal with a spoon... + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.383 b/source/ap/vim/patches/7.2.383 new file mode 100644 index 000000000..25fa7142b --- /dev/null +++ b/source/ap/vim/patches/7.2.383 @@ -0,0 +1,101 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.383 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.383 +Problem: Vim doesn't build cleanly with MSVC 2010. +Solution: Change a few types. (George Reilly) +Files: src/ex_cmds2.c, src/if_python.c, src/syntax.c + + +*** ../vim-7.2.382/src/ex_cmds2.c 2010-02-24 13:59:08.000000000 +0100 +--- src/ex_cmds2.c 2010-03-02 17:42:54.000000000 +0100 +*************** +*** 1165,1171 **** + char_u *arg; + { + char_u *end_subcmd; +- int len; + + /* Default: expand subcommands. */ + xp->xp_context = EXPAND_PROFILE; +--- 1165,1170 ---- +*************** +*** 1176,1183 **** + if (*end_subcmd == NUL) + return; + +! len = end_subcmd - arg; +! if (len == 5 && STRNCMP(arg, "start", 5) == 0) + { + xp->xp_context = EXPAND_FILES; + xp->xp_pattern = skipwhite(end_subcmd); +--- 1175,1181 ---- + if (*end_subcmd == NUL) + return; + +! if (end_subcmd - arg == 5 && STRNCMP(arg, "start", 5) == 0) + { + xp->xp_context = EXPAND_FILES; + xp->xp_pattern = skipwhite(end_subcmd); +*** ../vim-7.2.382/src/if_python.c 2009-11-11 15:06:59.000000000 +0100 +--- src/if_python.c 2010-03-02 17:43:39.000000000 +0100 +*************** +*** 2080,2086 **** + return -1; + + /* When column is out of range silently correct it. */ +! len = STRLEN(ml_get_buf(this->win->w_buffer, lnum, FALSE)); + if (col > len) + col = len; + +--- 2080,2086 ---- + return -1; + + /* When column is out of range silently correct it. */ +! len = (long)STRLEN(ml_get_buf(this->win->w_buffer, lnum, FALSE)); + if (col > len) + col = len; + +*** ../vim-7.2.382/src/syntax.c 2010-02-24 17:22:14.000000000 +0100 +--- src/syntax.c 2010-03-02 17:45:25.000000000 +0100 +*************** +*** 3090,3096 **** + { + /* a "\n" at the end of the pattern may take us below the last line */ + result->lnum = syn_buf->b_ml.ml_line_count; +! col = STRLEN(ml_get_buf(syn_buf, result->lnum, FALSE)); + } + if (off != 0) + { +--- 3090,3096 ---- + { + /* a "\n" at the end of the pattern may take us below the last line */ + result->lnum = syn_buf->b_ml.ml_line_count; +! col = (int)STRLEN(ml_get_buf(syn_buf, result->lnum, FALSE)); + } + if (off != 0) + { +*** ../vim-7.2.382/src/version.c 2010-03-02 17:23:10.000000000 +0100 +--- src/version.c 2010-03-02 17:48:50.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 383, + /**/ + +-- +You were lucky to have a LAKE! There were a hundred and sixty of +us living in a small shoebox in the middle of the road. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.384 b/source/ap/vim/patches/7.2.384 new file mode 100644 index 000000000..24fc68075 --- /dev/null +++ b/source/ap/vim/patches/7.2.384 @@ -0,0 +1,59 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.384 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.384 (extra) +Problem: Vim doesn't build properly with MSVC 2010. +Solution: Add the nmake version to the build file. (George Reilly) +Files: src/Make_mvc.mak, src/testdir/Make_dos.mak + + +*** ../vim-7.2.383/src/Make_mvc.mak 2009-09-11 12:48:56.000000000 +0200 +--- src/Make_mvc.mak 2010-03-02 17:44:22.000000000 +0100 +*************** +*** 361,366 **** +--- 361,369 ---- + !if "$(_NMAKE_VER)" == "10.00.20506.01" + MSVCVER = 10.0 + !endif ++ !if "$(_NMAKE_VER)" == "10.00.30128.01" ++ MSVCVER = 10.0 ++ !endif + !endif + + # Abort bulding VIM if version of VC is unrecognised. +*** ../vim-7.2.383/src/testdir/Make_dos.mak 2010-01-19 15:51:29.000000000 +0100 +--- src/testdir/Make_dos.mak 2010-03-02 17:45:48.000000000 +0100 +*************** +*** 56,61 **** +--- 56,62 ---- + -if exist small.vim del small.vim + -if exist tiny.vim del tiny.vim + -if exist mbyte.vim del mbyte.vim ++ -if exist mzscheme.vim del mzscheme.vim + -del X* + -if exist viminfo del viminfo + +*** ../vim-7.2.383/src/version.c 2010-03-02 17:50:30.000000000 +0100 +--- src/version.c 2010-03-02 17:59:09.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 384, + /**/ + +-- +Yah, well, we had to carve our electrons out of driftwood we'd +find. In the winter. Uphill. Both ways. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.385 b/source/ap/vim/patches/7.2.385 new file mode 100644 index 000000000..9f9a9178e --- /dev/null +++ b/source/ap/vim/patches/7.2.385 @@ -0,0 +1,63 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.385 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.385 +Problem: When in the command line window dragging status line only works + for last-but-one window. (Jean Johner) +Solution: Remove the code that disallows this. +Files: src/ui.c + + +*** ../vim-7.2.384/src/ui.c 2010-01-19 14:59:14.000000000 +0100 +--- src/ui.c 2010-03-02 18:06:30.000000000 +0100 +*************** +*** 2598,2611 **** + if (cmdwin_type != 0 && wp != curwin) + { + /* A click outside the command-line window: Use modeless +! * selection if possible. Allow dragging the status line of +! * windows just above the command-line window. */ +! if (wp->w_winrow + wp->w_height +! != curwin->w_prev->w_winrow + curwin->w_prev->w_height) +! { +! on_status_line = 0; +! dragwin = NULL; +! } + # ifdef FEAT_VERTSPLIT + on_sep_line = 0; + # endif +--- 2598,2604 ---- + if (cmdwin_type != 0 && wp != curwin) + { + /* A click outside the command-line window: Use modeless +! * selection if possible. Allow dragging the status lines. */ + # ifdef FEAT_VERTSPLIT + on_sep_line = 0; + # endif +*** ../vim-7.2.384/src/version.c 2010-03-02 17:59:39.000000000 +0100 +--- src/version.c 2010-03-02 18:14:29.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 385, + /**/ + +-- +You were lucky. We lived for three months in a brown paper bag in a +septic tank. We used to have to get up at six o'clock in the morning, +clean the bag, eat a crust of stale bread, go to work down mill for +fourteen hours a day week in-week out. When we got home, our Dad +would thrash us to sleep with his belt! + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.386 b/source/ap/vim/patches/7.2.386 new file mode 100644 index 000000000..7212b27c7 --- /dev/null +++ b/source/ap/vim/patches/7.2.386 @@ -0,0 +1,61 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.386 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.386 +Problem: Focus hack for KDE 3.1 causes problems for other window managers. +Solution: Remove the hack. (forwarded by Joel Bradshaw) +Files: src/gui_gtk.c + + +*** ../vim-7.2.385/src/gui_gtk.c 2009-05-17 16:23:20.000000000 +0200 +--- src/gui_gtk.c 2010-03-10 12:07:59.000000000 +0100 +*************** +*** 2313,2331 **** + gtk_widget_destroy(dialog); + } + +- /* Terrible hack: When the text area still has focus when we remove the +- * dialog, somehow gvim loses window focus. This is with "point to type" +- * in the KDE 3.1 window manager. Warp the mouse pointer to outside the +- * window and back to avoid that. */ +- if (!gui.in_focus) +- { +- int x, y; +- +- gdk_window_get_pointer(gui.drawarea->window, &x, &y, NULL); +- gui_mch_setmouse(-100, -100); +- gui_mch_setmouse(x, y); +- } +- + return response > 0 ? response : 0; + } + +--- 2313,2318 ---- +*** ../vim-7.2.385/src/version.c 2010-03-02 18:15:47.000000000 +0100 +--- src/version.c 2010-03-10 12:09:00.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 386, + /**/ + +-- +ARTHUR: Well, I AM king... +DENNIS: Oh king, eh, very nice. An' how'd you get that, eh? By exploitin' + the workers -- by 'angin' on to outdated imperialist dogma which + perpetuates the economic an' social differences in our society! If + there's ever going to be any progress-- + The Quest for the Holy Grail (Monty Python) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.387 b/source/ap/vim/patches/7.2.387 new file mode 100644 index 000000000..ccbd6e4c0 --- /dev/null +++ b/source/ap/vim/patches/7.2.387 @@ -0,0 +1,238 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.387 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.387 +Problem: Ruby with MingW still doesn't build all versions. +Solution: More #ifdefs for the Ruby code. (Sergey Khorev) +Files: src/if_ruby.c + + +*** ../vim-7.2.386/src/if_ruby.c 2010-02-24 15:47:58.000000000 +0100 +--- src/if_ruby.c 2010-03-10 12:40:30.000000000 +0100 +*************** +*** 39,46 **** + # define rb_cTrueClass (*dll_rb_cTrueClass) + # if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + /* +! * On ver 1.8, all Ruby functions are exported with "__declspce(dllimport)" +! * in ruby.h. But it cause trouble for these variables, because it is + * defined in this file. When defined this RUBY_EXPORT it modified to + * "extern" and be able to avoid this problem. + */ +--- 39,46 ---- + # define rb_cTrueClass (*dll_rb_cTrueClass) + # if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + /* +! * On ver 1.8, all Ruby functions are exported with "__declspec(dllimport)" +! * in ruby.h. But it causes trouble for these variables, because it is + * defined in this file. When defined this RUBY_EXPORT it modified to + * "extern" and be able to avoid this problem. + */ +*************** +*** 53,58 **** +--- 53,65 ---- + # undef _WIN32_WINNT + #endif + ++ #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 ++ /* Ruby 1.9 defines a number of static functions which use rb_num2long and ++ * rb_int2big */ ++ # define rb_num2long rb_num2long_stub ++ # define rb_int2big rb_int2big_stub ++ #endif ++ + #include <ruby.h> + #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + # include <ruby/encoding.h> +*************** +*** 159,165 **** + #define rb_str_concat dll_rb_str_concat + #define rb_str_new dll_rb_str_new + #define rb_str_new2 dll_rb_str_new2 +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + # define rb_errinfo dll_rb_errinfo + #else + # define ruby_errinfo (*dll_ruby_errinfo) +--- 166,179 ---- + #define rb_str_concat dll_rb_str_concat + #define rb_str_new dll_rb_str_new + #define rb_str_new2 dll_rb_str_new2 +! #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 +! # define rb_string_value_ptr dll_rb_string_value_ptr +! # define rb_float_new dll_rb_float_new +! # define rb_ary_new dll_rb_ary_new +! # define rb_ary_push dll_rb_ary_push +! #endif +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 \ +! || defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + # define rb_errinfo dll_rb_errinfo + #else + # define ruby_errinfo (*dll_ruby_errinfo) +*************** +*** 226,232 **** + static VALUE (*dll_rb_str_concat) (VALUE, VALUE); + static VALUE (*dll_rb_str_new) (const char*, long); + static VALUE (*dll_rb_str_new2) (const char*); +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + static VALUE (*dll_rb_errinfo) (void); + #else + static VALUE *dll_ruby_errinfo; +--- 240,247 ---- + static VALUE (*dll_rb_str_concat) (VALUE, VALUE); + static VALUE (*dll_rb_str_new) (const char*, long); + static VALUE (*dll_rb_str_new2) (const char*); +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 \ +! || defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + static VALUE (*dll_rb_errinfo) (void); + #else + static VALUE *dll_ruby_errinfo; +*************** +*** 235,240 **** +--- 250,264 ---- + static void (*dll_ruby_init_loadpath) (void); + static void (*dll_NtInitialize) (int*, char***); + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 ++ static char * (*dll_rb_string_value_ptr) (volatile VALUE*); ++ static VALUE (*dll_rb_float_new) (double); ++ static VALUE (*dll_rb_ary_new) (void); ++ static VALUE (*dll_rb_ary_push) (VALUE, VALUE); ++ #endif ++ #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 ++ static VALUE (*dll_rb_int2big)(SIGNED_VALUE); ++ #endif ++ #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + static int (*dll_rb_w32_snprintf)(char*, size_t, const char*, ...); + #endif + +*************** +*** 246,251 **** +--- 270,286 ---- + static VALUE (*dll_rb_sprintf) (const char*, ...); + #endif + ++ #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 ++ static SIGNED_VALUE rb_num2long_stub(VALUE x) ++ { ++ return dll_rb_num2long(x); ++ } ++ static VALUE rb_int2big_stub(SIGNED_VALUE x) ++ { ++ return dll_rb_int2big(x); ++ } ++ #endif ++ + static HINSTANCE hinstRuby = 0; /* Instance of ruby.dll */ + + /* +*************** +*** 301,317 **** + {"rb_str_concat", (RUBY_PROC*)&dll_rb_str_concat}, + {"rb_str_new", (RUBY_PROC*)&dll_rb_str_new}, + {"rb_str_new2", (RUBY_PROC*)&dll_rb_str_new2}, +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + {"rb_errinfo", (RUBY_PROC*)&dll_rb_errinfo}, + #else + {"ruby_errinfo", (RUBY_PROC*)&dll_ruby_errinfo}, + #endif + {"ruby_init", (RUBY_PROC*)&dll_ruby_init}, + {"ruby_init_loadpath", (RUBY_PROC*)&dll_ruby_init_loadpath}, +! {"NtInitialize", (RUBY_PROC*)&dll_NtInitialize}, + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + {"rb_w32_snprintf", (RUBY_PROC*)&dll_rb_w32_snprintf}, + #endif + #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + {"ruby_script", (RUBY_PROC*)&dll_ruby_script}, + {"rb_enc_find_index", (RUBY_PROC*)&dll_rb_enc_find_index}, +--- 336,368 ---- + {"rb_str_concat", (RUBY_PROC*)&dll_rb_str_concat}, + {"rb_str_new", (RUBY_PROC*)&dll_rb_str_new}, + {"rb_str_new2", (RUBY_PROC*)&dll_rb_str_new2}, +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 \ +! || defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + {"rb_errinfo", (RUBY_PROC*)&dll_rb_errinfo}, + #else + {"ruby_errinfo", (RUBY_PROC*)&dll_ruby_errinfo}, + #endif + {"ruby_init", (RUBY_PROC*)&dll_ruby_init}, + {"ruby_init_loadpath", (RUBY_PROC*)&dll_ruby_init_loadpath}, +! { +! #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER < 19 +! "NtInitialize", +! #else +! "ruby_sysinit", +! #endif +! (RUBY_PROC*)&dll_NtInitialize}, + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + {"rb_w32_snprintf", (RUBY_PROC*)&dll_rb_w32_snprintf}, + #endif ++ #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 ++ {"rb_string_value_ptr", (RUBY_PROC*)&dll_rb_string_value_ptr}, ++ {"rb_float_new", (RUBY_PROC*)&dll_rb_float_new}, ++ {"rb_ary_new", (RUBY_PROC*)&dll_rb_ary_new}, ++ {"rb_ary_push", (RUBY_PROC*)&dll_rb_ary_push}, ++ #endif ++ #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 ++ {"rb_int2big", (RUBY_PROC*)&dll_rb_int2big}, ++ #endif + #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + {"ruby_script", (RUBY_PROC*)&dll_ruby_script}, + {"rb_enc_find_index", (RUBY_PROC*)&dll_rb_enc_find_index}, +*************** +*** 569,575 **** + static void error_print(int state) + { + #ifndef DYNAMIC_RUBY +! #if !(defined(RUBY_VERSION) && RUBY_VERSION >= 19) + RUBYEXTERN VALUE ruby_errinfo; + #endif + #endif +--- 620,627 ---- + static void error_print(int state) + { + #ifndef DYNAMIC_RUBY +! #if !(defined(RUBY_VERSION) && RUBY_VERSION >= 19) \ +! && !(defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19) + RUBYEXTERN VALUE ruby_errinfo; + #endif + #endif +*************** +*** 605,611 **** + break; + case TAG_RAISE: + case TAG_FATAL: +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + eclass = CLASS_OF(rb_errinfo()); + einfo = rb_obj_as_string(rb_errinfo()); + #else +--- 657,664 ---- + break; + case TAG_RAISE: + case TAG_FATAL: +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 \ +! || defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + eclass = CLASS_OF(rb_errinfo()); + einfo = rb_obj_as_string(rb_errinfo()); + #else +*** ../vim-7.2.386/src/version.c 2010-03-10 12:24:44.000000000 +0100 +--- src/version.c 2010-03-10 12:45:55.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 387, + /**/ + +-- +Vim is like Emacs without all the typing. (John "Johann" Spetz) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.388 b/source/ap/vim/patches/7.2.388 new file mode 100644 index 000000000..1a8a7a88c --- /dev/null +++ b/source/ap/vim/patches/7.2.388 @@ -0,0 +1,86 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.388 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.388 (extra part of 7.2.387) +Problem: Ruby with MingW still doesn't build all versions. +Solution: Different approach to build file. (Sergey Khorev) +Files: src/Make_ming.mak + + +*** ../vim-7.2.387/src/Make_ming.mak 2010-02-26 22:05:17.000000000 +0100 +--- src/Make_ming.mak 2010-03-10 12:34:25.000000000 +0100 +*************** +*** 212,234 **** + RUBY_VER_LONG = 1.6 + endif + +- ifeq ($(RUBY_VER), 16) + ifndef RUBY_PLATFORM + RUBY_PLATFORM = i586-mswin32 +! endif +! ifndef RUBY_INSTALL_NAME +! RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_VER) +! endif + else +- ifndef RUBY_PLATFORM + RUBY_PLATFORM = i386-mswin32 + endif + ifndef RUBY_INSTALL_NAME + RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_VER) + endif + endif + +! RUBYINC =-I $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/$(RUBY_PLATFORM) + ifeq (no, $(DYNAMIC_RUBY)) + RUBYLIB = -L$(RUBY)/lib -l$(RUBY_INSTALL_NAME) + endif +--- 212,236 ---- + RUBY_VER_LONG = 1.6 + endif + + ifndef RUBY_PLATFORM ++ ifeq ($(RUBY_VER), 16) + RUBY_PLATFORM = i586-mswin32 +! else ifneq ("X$(wildcard, $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/i386-mingw32)", X) +! RUBY_PLATFORM = i386-mingw32 + else + RUBY_PLATFORM = i386-mswin32 + endif ++ endif ++ + ifndef RUBY_INSTALL_NAME ++ ifeq ($(RUBY_VER), 16) ++ RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_VER) ++ else + RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_VER) + endif + endif + +! RUBYINC =-I $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/$(RUBY_PLATFORM) -I $(RUBY)/include/ruby-$(RUBY_VER_LONG) -I $(RUBY)/include/ruby-$(RUBY_VER_LONG)/$(RUBY_PLATFORM) + ifeq (no, $(DYNAMIC_RUBY)) + RUBYLIB = -L$(RUBY)/lib -l$(RUBY_INSTALL_NAME) + endif +*** ../vim-7.2.387/src/version.c 2010-03-10 12:46:38.000000000 +0100 +--- src/version.c 2010-03-10 13:18:38.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 388, + /**/ + +-- +Q: Is selling software the same as selling hardware? +A: No, good hardware is sold new, good software has already been used by many. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.389 b/source/ap/vim/patches/7.2.389 new file mode 100644 index 000000000..a4af355fb --- /dev/null +++ b/source/ap/vim/patches/7.2.389 @@ -0,0 +1,161 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.389 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.389 +Problem: synIDattr() cannot return the font. +Solution: Support the "font" argument. (Christian Brabandt) +Files: runtime/doc/eval.txt, src/eval.c, src/syntax.c + + +*** ../vim-7.2.388/runtime/doc/eval.txt 2010-01-19 15:51:29.000000000 +0100 +--- runtime/doc/eval.txt 2010-03-10 12:52:12.000000000 +0100 +*************** +*** 5370,5375 **** +--- 5388,5395 ---- + the color, cterm: color number as a string, + term: empty string) + "bg" background color (as with "fg") ++ "font" font name (only available in the GUI) ++ |highlight-font| + "sp" special color (as with "fg") |highlight-guisp| + "fg#" like "fg", but for the GUI and the GUI is + running the name in "#RRGGBB" form +*************** +*** 5379,5384 **** +--- 5399,5405 ---- + "italic" "1" if italic + "reverse" "1" if reverse + "inverse" "1" if inverse (= reverse) ++ "standout" "1" if standout + "underline" "1" if underlined + "undercurl" "1" if undercurled + +*** ../vim-7.2.388/src/eval.c 2010-02-24 15:47:58.000000000 +0100 +--- src/eval.c 2010-03-10 12:54:27.000000000 +0100 +*************** +*** 16627,16633 **** + p = highlight_has_attr(id, HL_BOLD, modec); + break; + +! case 'f': /* fg[#] */ + p = highlight_color(id, what, modec); + break; + +--- 16627,16633 ---- + p = highlight_has_attr(id, HL_BOLD, modec); + break; + +! case 'f': /* fg[#] or font */ + p = highlight_color(id, what, modec); + break; + +*** ../vim-7.2.388/src/syntax.c 2010-03-02 17:50:30.000000000 +0100 +--- src/syntax.c 2010-03-10 13:05:39.000000000 +0100 +*************** +*** 8326,8332 **** + char_u * + highlight_color(id, what, modec) + int id; +! char_u *what; /* "fg", "bg", "sp", "fg#", "bg#" or "sp#" */ + int modec; /* 'g' for GUI, 'c' for cterm, 't' for term */ + { + static char_u name[20]; +--- 8326,8332 ---- + char_u * + highlight_color(id, what, modec) + int id; +! char_u *what; /* "font", "fg", "bg", "sp", "fg#", "bg#" or "sp#" */ + int modec; /* 'g' for GUI, 'c' for cterm, 't' for term */ + { + static char_u name[20]; +*************** +*** 8334,8353 **** + int fg = FALSE; + # ifdef FEAT_GUI + int sp = FALSE; + # endif + + if (id <= 0 || id > highlight_ga.ga_len) + return NULL; + +! if (TOLOWER_ASC(what[0]) == 'f') + fg = TRUE; + # ifdef FEAT_GUI +! else if (TOLOWER_ASC(what[0]) == 's') + sp = TRUE; + if (modec == 'g') + { + /* return #RRGGBB form (only possible when GUI is running) */ +! if (gui.in_use && what[1] && what[2] == '#') + { + guicolor_T color; + long_u rgb; +--- 8334,8363 ---- + int fg = FALSE; + # ifdef FEAT_GUI + int sp = FALSE; ++ int font = FALSE; + # endif + + if (id <= 0 || id > highlight_ga.ga_len) + return NULL; + +! if (TOLOWER_ASC(what[0]) == 'f' && TOLOWER_ASC(what[1]) == 'g') + fg = TRUE; + # ifdef FEAT_GUI +! else if (TOLOWER_ASC(what[0]) == 'f' && TOLOWER_ASC(what[1]) == 'o' +! && TOLOWER_ASC(what[2]) == 'n' && TOLOWER_ASC(what[3]) == 't') +! font = TRUE; +! else if (TOLOWER_ASC(what[0]) == 's' && TOLOWER_ASC(what[1]) == 'p') + sp = TRUE; ++ else if (!(TOLOWER_ASC(what[0]) == 'b' && TOLOWER_ASC(what[1]) == 'g')) ++ return NULL; + if (modec == 'g') + { ++ /* return font name */ ++ if (font) ++ return HL_TABLE()[id - 1].sg_font_name; ++ + /* return #RRGGBB form (only possible when GUI is running) */ +! if (gui.in_use && what[2] == '#') + { + guicolor_T color; + long_u rgb; +*************** +*** 8374,8379 **** +--- 8384,8391 ---- + return (HL_TABLE()[id - 1].sg_gui_sp_name); + return (HL_TABLE()[id - 1].sg_gui_bg_name); + } ++ if (font || sp) ++ return NULL; + # endif + if (modec == 'c') + { +*** ../vim-7.2.388/src/version.c 2010-03-10 13:19:28.000000000 +0100 +--- src/version.c 2010-03-10 13:33:25.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 389, + /**/ + +-- +WOMAN: Dennis, there's some lovely filth down here. Oh -- how d'you do? +ARTHUR: How do you do, good lady. I am Arthur, King of the Britons. + Who's castle is that? +WOMAN: King of the who? + The Quest for the Holy Grail (Monty Python) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.390 b/source/ap/vim/patches/7.2.390 new file mode 100644 index 000000000..d10ed2a44 --- /dev/null +++ b/source/ap/vim/patches/7.2.390 @@ -0,0 +1,72 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.390 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.390 +Problem: In some situations the popup menu can be displayed wrong. +Solution: Remove the popup menu if the cursor moved. (Lech Lorens) +Files: src/edit.c + + +*** ../vim-7.2.389/src/edit.c 2010-01-19 14:59:14.000000000 +0100 +--- src/edit.c 2010-03-10 14:09:56.000000000 +0100 +*************** +*** 4684,4689 **** +--- 4684,4690 ---- + int startcol = 0; /* column where searched text starts */ + colnr_T curs_col; /* cursor column */ + int n; ++ int save_w_wrow; + + compl_direction = ins_compl_key2dir(c); + if (!compl_started) +*************** +*** 5067,5072 **** +--- 5068,5074 ---- + /* + * Find next match (and following matches). + */ ++ save_w_wrow = curwin->w_wrow; + n = ins_compl_next(TRUE, ins_compl_key2count(c), ins_compl_use_match(c)); + + /* may undisplay the popup menu */ +*************** +*** 5220,5225 **** +--- 5222,5233 ---- + /* RedrawingDisabled may be set when invoked through complete(). */ + n = RedrawingDisabled; + RedrawingDisabled = 0; ++ ++ /* If the cursor moved we need to remove the pum first. */ ++ setcursor(); ++ if (save_w_wrow != curwin->w_wrow) ++ ins_compl_del_pum(); ++ + ins_compl_show_pum(); + setcursor(); + RedrawingDisabled = n; +*** ../vim-7.2.389/src/version.c 2010-03-10 13:43:22.000000000 +0100 +--- src/version.c 2010-03-10 14:13:55.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 390, + /**/ + +-- +`When any government, or any church for that matter, undertakes to say to + its subjects, "This you may not read, this you must not see, this you are + forbidden to know," the end result is tyranny and oppression no matter how + holy the motives' -- Robert A Heinlein, "If this goes on --" + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.391 b/source/ap/vim/patches/7.2.391 new file mode 100644 index 000000000..731408de8 --- /dev/null +++ b/source/ap/vim/patches/7.2.391 @@ -0,0 +1,121 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.391 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.391 +Problem: Internal alloc(0) error when doing "CTRL-V $ c". (Martti Kuparinen) +Solution: Fix computations in getvcol(). (partly by Lech Lorens) +Files: src/charset.c, src/memline.c + + +*** ../vim-7.2.390/src/charset.c 2009-11-03 16:03:59.000000000 +0100 +--- src/charset.c 2010-03-10 14:38:14.000000000 +0100 +*************** +*** 1255,1261 **** + + vcol = 0; + ptr = ml_get_buf(wp->w_buffer, pos->lnum, FALSE); +! posptr = ptr + pos->col; + + /* + * This function is used very often, do some speed optimizations. +--- 1255,1264 ---- + + vcol = 0; + ptr = ml_get_buf(wp->w_buffer, pos->lnum, FALSE); +! if (pos->col == MAXCOL) +! posptr = NULL; /* continue until the NUL */ +! else +! posptr = ptr + pos->col; + + /* + * This function is used very often, do some speed optimizations. +*************** +*** 1313,1319 **** + incr = CHARSIZE(c); + } + +! if (ptr >= posptr) /* character at pos->col */ + break; + + vcol += incr; +--- 1316,1322 ---- + incr = CHARSIZE(c); + } + +! if (posptr != NULL && ptr >= posptr) /* character at pos->col */ + break; + + vcol += incr; +*************** +*** 1334,1340 **** + break; + } + +! if (ptr >= posptr) /* character at pos->col */ + break; + + vcol += incr; +--- 1337,1343 ---- + break; + } + +! if (posptr != NULL && ptr >= posptr) /* character at pos->col */ + break; + + vcol += incr; +*** ../vim-7.2.390/src/memline.c 2010-02-11 18:54:38.000000000 +0100 +--- src/memline.c 2010-03-10 14:38:25.000000000 +0100 +*************** +*** 2113,2124 **** + if (buf->b_ml.ml_mfp == NULL) /* there are no lines */ + return (char_u *)""; + +! /* +! * See if it is the same line as requested last time. +! * Otherwise may need to flush last used line. +! * Don't use the last used line when 'swapfile' is reset, need to load all +! * blocks. +! */ + if (buf->b_ml.ml_line_lnum != lnum || mf_dont_release) + { + ml_flush_line(buf); +--- 2113,2124 ---- + if (buf->b_ml.ml_mfp == NULL) /* there are no lines */ + return (char_u *)""; + +! /* +! * See if it is the same line as requested last time. +! * Otherwise may need to flush last used line. +! * Don't use the last used line when 'swapfile' is reset, need to load all +! * blocks. +! */ + if (buf->b_ml.ml_line_lnum != lnum || mf_dont_release) + { + ml_flush_line(buf); +*** ../vim-7.2.390/src/version.c 2010-03-10 14:15:28.000000000 +0100 +--- src/version.c 2010-03-10 14:31:02.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 391, + /**/ + +-- +WOMAN: King of the who? +ARTHUR: The Britons. +WOMAN: Who are the Britons? +ARTHUR: Well, we all are. we're all Britons and I am your king. + The Quest for the Holy Grail (Monty Python) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.392 b/source/ap/vim/patches/7.2.392 new file mode 100644 index 000000000..c253d91b5 --- /dev/null +++ b/source/ap/vim/patches/7.2.392 @@ -0,0 +1,184 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.392 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.392 +Problem: Netbeans hangs reading from a socket at the maximum block size. +Solution: Use select() or poll(). (Xavier de Gaye) +Files: src/vim.h, src/os_unixx.h, src/if_xcmdsrv.c, src/netbeans.c + + +*** ../vim-7.2.391/src/vim.h 2010-03-02 15:55:51.000000000 +0100 +--- src/vim.h 2010-03-10 15:14:03.000000000 +0100 +*************** +*** 477,482 **** +--- 477,499 ---- + # include <stdarg.h> + #endif + ++ # if defined(HAVE_SYS_SELECT_H) && \ ++ (!defined(HAVE_SYS_TIME_H) || defined(SYS_SELECT_WITH_SYS_TIME)) ++ # include <sys/select.h> ++ # endif ++ ++ # ifndef HAVE_SELECT ++ # ifdef HAVE_SYS_POLL_H ++ # include <sys/poll.h> ++ # define HAVE_POLL ++ # else ++ # ifdef HAVE_POLL_H ++ # include <poll.h> ++ # define HAVE_POLL ++ # endif ++ # endif ++ # endif ++ + /* ================ end of the header file puzzle =============== */ + + /* +*** ../vim-7.2.391/src/os_unixx.h 2006-03-25 22:48:00.000000000 +0100 +--- src/os_unixx.h 2010-03-10 15:14:49.000000000 +0100 +*************** +*** 28,38 **** + # include <sys/wait.h> + # endif + +- # if defined(HAVE_SYS_SELECT_H) && \ +- (!defined(HAVE_SYS_TIME_H) || defined(SYS_SELECT_WITH_SYS_TIME)) +- # include <sys/select.h> +- # endif +- + # ifndef WEXITSTATUS + # ifdef HAVE_UNION_WAIT + # define WEXITSTATUS(stat_val) ((stat_val).w_T.w_Retcode) +--- 28,33 ---- +*************** +*** 65,80 **** + # include <string.h> + #endif + +- #ifndef HAVE_SELECT +- # ifdef HAVE_SYS_POLL_H +- # include <sys/poll.h> +- # else +- # ifdef HAVE_POLL_H +- # include <poll.h> +- # endif +- # endif +- #endif +- + #ifdef HAVE_SYS_STREAM_H + # include <sys/stream.h> + #endif +--- 60,65 ---- +*** ../vim-7.2.391/src/if_xcmdsrv.c 2009-05-16 17:29:37.000000000 +0200 +--- src/if_xcmdsrv.c 2010-03-10 15:14:09.000000000 +0100 +*************** +*** 21,41 **** + # include <X11/Xatom.h> + # endif + +- # if defined(HAVE_SYS_SELECT_H) && \ +- (!defined(HAVE_SYS_TIME_H) || defined(SYS_SELECT_WITH_SYS_TIME)) +- # include <sys/select.h> +- # endif +- +- # ifndef HAVE_SELECT +- # ifdef HAVE_SYS_POLL_H +- # include <sys/poll.h> +- # else +- # ifdef HAVE_POLL_H +- # include <poll.h> +- # endif +- # endif +- # endif +- + /* + * This file provides procedures that implement the command server + * functionality of Vim when in contact with an X11 server. +--- 21,26 ---- +*** ../vim-7.2.391/src/netbeans.c 2010-01-19 15:12:33.000000000 +0100 +--- src/netbeans.c 2010-03-10 15:21:37.000000000 +0100 +*************** +*** 736,741 **** +--- 736,749 ---- + #ifndef FEAT_GUI_GTK + static int level = 0; + #endif ++ #ifdef HAVE_SELECT ++ struct timeval tval; ++ fd_set rfds; ++ #else ++ # ifdef HAVE_POLL ++ struct pollfd fds; ++ # endif ++ #endif + + if (sd < 0) + { +*************** +*** 755,763 **** + return; /* out of memory! */ + } + +! /* Keep on reading for as long as there is something to read. */ + for (;;) + { + len = sock_read(sd, buf, MAXMSGSIZE); + if (len <= 0) + break; /* error or nothing more to read */ +--- 763,788 ---- + return; /* out of memory! */ + } + +! /* Keep on reading for as long as there is something to read. +! * Use select() or poll() to avoid blocking on a message that is exactly +! * MAXMSGSIZE long. */ + for (;;) + { ++ #ifdef HAVE_SELECT ++ FD_ZERO(&rfds); ++ FD_SET(sd, &rfds); ++ tval.tv_sec = 0; ++ tval.tv_usec = 0; ++ if (select(sd + 1, &rfds, NULL, NULL, &tval) <= 0) ++ break; ++ #else ++ # ifdef HAVE_POLL ++ fds.fd = sd; ++ fds.events = POLLIN; ++ if (poll(&fds, 1, 0) <= 0) ++ break; ++ # endif ++ #endif + len = sock_read(sd, buf, MAXMSGSIZE); + if (len <= 0) + break; /* error or nothing more to read */ +*** ../vim-7.2.391/src/version.c 2010-03-10 14:46:21.000000000 +0100 +--- src/version.c 2010-03-10 16:10:48.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 392, + /**/ + +-- +WOMAN: I didn't know we had a king. I thought we were an autonomous + collective. +DENNIS: You're fooling yourself. We're living in a dictatorship. A + self-perpetuating autocracy in which the working classes-- +WOMAN: Oh there you go, bringing class into it again. +DENNIS: That's what it's all about if only people would-- + The Quest for the Holy Grail (Monty Python) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.393 b/source/ap/vim/patches/7.2.393 new file mode 100644 index 000000000..796f65487 --- /dev/null +++ b/source/ap/vim/patches/7.2.393 @@ -0,0 +1,281 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.393 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.393 +Problem: Mac: Can't build with different Xcode developer tools directory. +Solution: make "Developer" directory name configurable. (Rainer Muller) +Files: src/configure.in, src/auto/configure + + +*** ../vim-7.2.392/src/configure.in 2010-02-24 14:46:58.000000000 +0100 +--- src/configure.in 2010-03-10 16:16:48.000000000 +0100 +*************** +*** 116,121 **** +--- 116,137 ---- + MACARCH="$withval"; AC_MSG_RESULT($MACARCH), + MACARCH="current"; AC_MSG_RESULT(defaulting to $MACARCH)) + ++ AC_MSG_CHECKING(--with-developer-dir argument) ++ AC_ARG_WITH(developer-dir, [ --with-developer-dir=PATH use PATH as location for Xcode developer tools], ++ DEVELOPER_DIR="$withval"; AC_MSG_RESULT($DEVELOPER_DIR), ++ DEVELOPER_DIR=""; AC_MSG_RESULT(not present)) ++ ++ if test "x$DEVELOPER_DIR" = "x"; then ++ AC_PATH_PROG(XCODE_SELECT, xcode-select) ++ if test "x$XCODE_SELECT" != "x"; then ++ AC_MSG_CHECKING(for developer dir using xcode-select) ++ DEVELOPER_DIR=`$XCODE_SELECT -print-path` ++ AC_MSG_RESULT([$DEVELOPER_DIR]) ++ else ++ DEVELOPER_DIR=/Developer ++ fi ++ fi ++ + if test "x$MACARCH" = "xboth"; then + AC_MSG_CHECKING(for 10.4 universal SDK) + dnl There is a terrible inconsistency (but we appear to get away with it): +*************** +*** 127,133 **** + save_cppflags="$CPPFLAGS" + save_cflags="$CFLAGS" + save_ldflags="$LDFLAGS" +! CFLAGS="$CFLAGS -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" + AC_TRY_LINK([ ], [ ], + AC_MSG_RESULT(found, will make universal binary), + +--- 143,149 ---- + save_cppflags="$CPPFLAGS" + save_cflags="$CFLAGS" + save_ldflags="$LDFLAGS" +! CFLAGS="$CFLAGS -isysroot $DEVELOPER_DIR/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" + AC_TRY_LINK([ ], [ ], + AC_MSG_RESULT(found, will make universal binary), + +*************** +*** 157,165 **** + dnl TODO: use -arch i386 on Intel machines + CPPFLAGS="$CPPFLAGS -DMACOS_X_UNIX -no-cpp-precomp" + if test "x$MACARCH" = "xboth"; then +! CPPFLAGS="$CPPFLAGS -I/Developer/SDKs/MacOSX10.4u.sdk/Developer/Headers/FlatCarbon" + else +! CPPFLAGS="$CPPFLAGS -I/Developer/Headers/FlatCarbon" + fi + + dnl If Carbon is found, assume we don't want X11 +--- 173,181 ---- + dnl TODO: use -arch i386 on Intel machines + CPPFLAGS="$CPPFLAGS -DMACOS_X_UNIX -no-cpp-precomp" + if test "x$MACARCH" = "xboth"; then +! CPPFLAGS="$CPPFLAGS -I$DEVELOPER_DIR/SDKs/MacOSX10.4u.sdk/Developer/Headers/FlatCarbon" + else +! CPPFLAGS="$CPPFLAGS -I$DEVELOPER_DIR/Headers/FlatCarbon" + fi + + dnl If Carbon is found, assume we don't want X11 +*************** +*** 3233,3239 **** + fi + fi + if test "x$MACARCH" = "xboth"; then +! LDFLAGS="$LDFLAGS -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" + fi + + dnl gcc 3.1 changed the meaning of -MM. The only solution appears to be to +--- 3249,3255 ---- + fi + fi + if test "x$MACARCH" = "xboth"; then +! LDFLAGS="$LDFLAGS -isysroot $DEVELOPER_DIR/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" + fi + + dnl gcc 3.1 changed the meaning of -MM. The only solution appears to be to +*** ../vim-7.2.392/src/auto/configure 2010-02-24 14:46:58.000000000 +0100 +--- src/auto/configure 2010-03-10 16:19:47.000000000 +0100 +*************** +*** 718,723 **** +--- 718,724 ---- + VIMNAME + OS_EXTRA_OBJ + OS_EXTRA_SRC ++ XCODE_SELECT + CPP_MM + STRIP + AWK +*************** +*** 774,779 **** +--- 775,781 ---- + enable_option_checking + enable_darwin + with_mac_arch ++ with_developer_dir + with_local_dir + with_vim_name + with_ex_name +*************** +*** 1492,1497 **** +--- 1494,1500 ---- + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-mac-arch=ARCH current, intel, ppc or both ++ --with-developer-dir=PATH use PATH as location for Xcode developer tools + --with-local-dir=PATH search PATH instead of /usr/local for local libraries. + --without-local-dir do not search /usr/local for local libraries. + --with-vim-name=NAME what to call the Vim executable +*************** +*** 3833,3845 **** + fi + + + if test "x$MACARCH" = "xboth"; then + { $as_echo "$as_me:$LINENO: checking for 10.4 universal SDK" >&5 + $as_echo_n "checking for 10.4 universal SDK... " >&6; } + save_cppflags="$CPPFLAGS" + save_cflags="$CFLAGS" + save_ldflags="$LDFLAGS" +! CFLAGS="$CFLAGS -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +--- 3836,3913 ---- + fi + + ++ { $as_echo "$as_me:$LINENO: checking --with-developer-dir argument" >&5 ++ $as_echo_n "checking --with-developer-dir argument... " >&6; } ++ ++ # Check whether --with-developer-dir was given. ++ if test "${with_developer_dir+set}" = set; then ++ withval=$with_developer_dir; DEVELOPER_DIR="$withval"; { $as_echo "$as_me:$LINENO: result: $DEVELOPER_DIR" >&5 ++ $as_echo "$DEVELOPER_DIR" >&6; } ++ else ++ DEVELOPER_DIR=""; { $as_echo "$as_me:$LINENO: result: not present" >&5 ++ $as_echo "not present" >&6; } ++ fi ++ ++ ++ if test "x$DEVELOPER_DIR" = "x"; then ++ # Extract the first word of "xcode-select", so it can be a program name with args. ++ set dummy xcode-select; ac_word=$2 ++ { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 ++ $as_echo_n "checking for $ac_word... " >&6; } ++ if test "${ac_cv_path_XCODE_SELECT+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++ else ++ case $XCODE_SELECT in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XCODE_SELECT="$XCODE_SELECT" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++ for as_dir in $PATH ++ do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XCODE_SELECT="$as_dir/$ac_word$ac_exec_ext" ++ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++ done ++ done ++ IFS=$as_save_IFS ++ ++ ;; ++ esac ++ fi ++ XCODE_SELECT=$ac_cv_path_XCODE_SELECT ++ if test -n "$XCODE_SELECT"; then ++ { $as_echo "$as_me:$LINENO: result: $XCODE_SELECT" >&5 ++ $as_echo "$XCODE_SELECT" >&6; } ++ else ++ { $as_echo "$as_me:$LINENO: result: no" >&5 ++ $as_echo "no" >&6; } ++ fi ++ ++ ++ if test "x$XCODE_SELECT" != "x"; then ++ { $as_echo "$as_me:$LINENO: checking for developer dir using xcode-select" >&5 ++ $as_echo_n "checking for developer dir using xcode-select... " >&6; } ++ DEVELOPER_DIR=`$XCODE_SELECT -print-path` ++ { $as_echo "$as_me:$LINENO: result: $DEVELOPER_DIR" >&5 ++ $as_echo "$DEVELOPER_DIR" >&6; } ++ else ++ DEVELOPER_DIR=/Developer ++ fi ++ fi ++ + if test "x$MACARCH" = "xboth"; then + { $as_echo "$as_me:$LINENO: checking for 10.4 universal SDK" >&5 + $as_echo_n "checking for 10.4 universal SDK... " >&6; } + save_cppflags="$CPPFLAGS" + save_cflags="$CFLAGS" + save_ldflags="$LDFLAGS" +! CFLAGS="$CFLAGS -isysroot $DEVELOPER_DIR/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +*************** +*** 3960,3968 **** + OS_EXTRA_OBJ="objects/os_macosx.o objects/os_mac_conv.o" + CPPFLAGS="$CPPFLAGS -DMACOS_X_UNIX -no-cpp-precomp" + if test "x$MACARCH" = "xboth"; then +! CPPFLAGS="$CPPFLAGS -I/Developer/SDKs/MacOSX10.4u.sdk/Developer/Headers/FlatCarbon" + else +! CPPFLAGS="$CPPFLAGS -I/Developer/Headers/FlatCarbon" + fi + + # On IRIX 5.3, sys/types and inttypes.h are conflicting. +--- 4028,4036 ---- + OS_EXTRA_OBJ="objects/os_macosx.o objects/os_mac_conv.o" + CPPFLAGS="$CPPFLAGS -DMACOS_X_UNIX -no-cpp-precomp" + if test "x$MACARCH" = "xboth"; then +! CPPFLAGS="$CPPFLAGS -I$DEVELOPER_DIR/SDKs/MacOSX10.4u.sdk/Developer/Headers/FlatCarbon" + else +! CPPFLAGS="$CPPFLAGS -I$DEVELOPER_DIR/Headers/FlatCarbon" + fi + + # On IRIX 5.3, sys/types and inttypes.h are conflicting. +*************** +*** 17319,17325 **** + fi + fi + if test "x$MACARCH" = "xboth"; then +! LDFLAGS="$LDFLAGS -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" + fi + + DEPEND_CFLAGS_FILTER= +--- 17387,17393 ---- + fi + fi + if test "x$MACARCH" = "xboth"; then +! LDFLAGS="$LDFLAGS -isysroot $DEVELOPER_DIR/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" + fi + + DEPEND_CFLAGS_FILTER= +*** ../vim-7.2.392/src/version.c 2010-03-10 16:11:57.000000000 +0100 +--- src/version.c 2010-03-10 16:26:00.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 393, + /**/ + +-- +There are 2 kinds of people in my world: those who know Unix, Perl, Vim, GNU, +Linux, etc, and those who know COBOL. It gets very difficult for me at +parties, not knowing which group to socialise with :-) + Sitaram Chamarty + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.394 b/source/ap/vim/patches/7.2.394 new file mode 100644 index 000000000..50235e04d --- /dev/null +++ b/source/ap/vim/patches/7.2.394 @@ -0,0 +1,99 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.394 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.394 +Problem: .lzma and .xz files are not supported. +Solution: Recognize .lzma and .xz files so that they can be edited. +Files: runtime/plugin/gzip.vim + + +*** ../vim-7.2.393/runtime/plugin/gzip.vim 2005-07-27 23:12:49.000000000 +0200 +--- runtime/plugin/gzip.vim 2010-03-10 17:07:22.000000000 +0100 +*************** +*** 1,6 **** + " Vim plugin for editing compressed files. + " Maintainer: Bram Moolenaar <Bram@vim.org> +! " Last Change: 2005 Jul 26 + + " Exit quickly when: + " - this plugin was already loaded +--- 1,6 ---- + " Vim plugin for editing compressed files. + " Maintainer: Bram Moolenaar <Bram@vim.org> +! " Last Change: 2010 Mar 10 + + " Exit quickly when: + " - this plugin was already loaded +*************** +*** 20,36 **** + " + " Set binary mode before reading the file. + " Use "gzip -d", gunzip isn't always available. +! autocmd BufReadPre,FileReadPre *.gz,*.bz2,*.Z setlocal bin + autocmd BufReadPost,FileReadPost *.gz call gzip#read("gzip -dn") + autocmd BufReadPost,FileReadPost *.bz2 call gzip#read("bzip2 -d") + autocmd BufReadPost,FileReadPost *.Z call gzip#read("uncompress") + autocmd BufWritePost,FileWritePost *.gz call gzip#write("gzip") + autocmd BufWritePost,FileWritePost *.bz2 call gzip#write("bzip2") + autocmd BufWritePost,FileWritePost *.Z call gzip#write("compress -f") + autocmd FileAppendPre *.gz call gzip#appre("gzip -dn") + autocmd FileAppendPre *.bz2 call gzip#appre("bzip2 -d") + autocmd FileAppendPre *.Z call gzip#appre("uncompress") + autocmd FileAppendPost *.gz call gzip#write("gzip") + autocmd FileAppendPost *.bz2 call gzip#write("bzip2") + autocmd FileAppendPost *.Z call gzip#write("compress -f") + augroup END +--- 20,44 ---- + " + " Set binary mode before reading the file. + " Use "gzip -d", gunzip isn't always available. +! autocmd BufReadPre,FileReadPre *.gz,*.bz2,*.Z,*.lzma,*.xz setlocal bin + autocmd BufReadPost,FileReadPost *.gz call gzip#read("gzip -dn") + autocmd BufReadPost,FileReadPost *.bz2 call gzip#read("bzip2 -d") + autocmd BufReadPost,FileReadPost *.Z call gzip#read("uncompress") ++ autocmd BufReadPost,FileReadPost *.lzma call gzip#read("lzma -d") ++ autocmd BufReadPost,FileReadPost *.xz call gzip#read("xz -d") + autocmd BufWritePost,FileWritePost *.gz call gzip#write("gzip") + autocmd BufWritePost,FileWritePost *.bz2 call gzip#write("bzip2") + autocmd BufWritePost,FileWritePost *.Z call gzip#write("compress -f") ++ autocmd BufWritePost,FileWritePost *.lzma call gzip#write("lzma -z") ++ autocmd BufWritePost,FileWritePost *.xz call gzip#write("xz -z") + autocmd FileAppendPre *.gz call gzip#appre("gzip -dn") + autocmd FileAppendPre *.bz2 call gzip#appre("bzip2 -d") + autocmd FileAppendPre *.Z call gzip#appre("uncompress") ++ autocmd FileAppendPre *.lzma call gzip#appre("lzma -d") ++ autocmd FileAppendPre *.xz call gzip#appre("xz -d") + autocmd FileAppendPost *.gz call gzip#write("gzip") + autocmd FileAppendPost *.bz2 call gzip#write("bzip2") + autocmd FileAppendPost *.Z call gzip#write("compress -f") ++ autocmd FileAppendPost *.lzma call gzip#write("lzma -z") ++ autocmd FileAppendPost *.xz call gzip#write("xz -z") + augroup END +*** ../vim-7.2.393/src/version.c 2010-03-10 16:27:27.000000000 +0100 +--- src/version.c 2010-03-10 17:12:43.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 394, + /**/ + +-- +ARTHUR: Be quiet! +DENNIS: --but by a two-thirds majority in the case of more-- +ARTHUR: Be quiet! I order you to be quiet! +WOMAN: Order, eh -- who does he think he is? +ARTHUR: I am your king! + The Quest for the Holy Grail (Monty Python) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.395 b/source/ap/vim/patches/7.2.395 new file mode 100644 index 000000000..1b5b1bae8 --- /dev/null +++ b/source/ap/vim/patches/7.2.395 @@ -0,0 +1,60 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.395 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.395 +Problem: In help CTRL=] on g?g? escapes the ?, causing it to fail. (Tony + Mechelynck) +Solution: Don't escape ? for a help command. (Sergey Khorev) +Files: src/normal.c + + +*** ../vim-7.2.394/src/normal.c 2010-01-19 15:23:38.000000000 +0100 +--- src/normal.c 2010-03-13 13:04:46.000000000 +0100 +*************** +*** 5526,5536 **** + break; + + default: + if (curbuf->b_help) + STRCPY(buf, "he! "); + else + { +- tag_cmd = TRUE; + if (g_cmd) + STRCPY(buf, "tj "); + else +--- 5526,5536 ---- + break; + + default: ++ tag_cmd = TRUE; + if (curbuf->b_help) + STRCPY(buf, "he! "); + else + { + if (g_cmd) + STRCPY(buf, "tj "); + else +*** ../vim-7.2.394/src/version.c 2010-03-10 17:14:07.000000000 +0100 +--- src/version.c 2010-03-17 13:05:11.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 395, + /**/ + +-- +There are three kinds of people: Those who can count & those who can't. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.396 b/source/ap/vim/patches/7.2.396 new file mode 100644 index 000000000..f12692311 --- /dev/null +++ b/source/ap/vim/patches/7.2.396 @@ -0,0 +1,51 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.396 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.396 +Problem: Get E38 errors. (Dasn) +Solution: Set cursor to line 1 instead of 0. (Dominique Pelle) +Files: src/popupmnu.c + + +*** ../vim-7.2.395/src/popupmnu.c 2010-01-19 18:05:05.000000000 +0100 +--- src/popupmnu.c 2010-03-17 12:59:01.000000000 +0100 +*************** +*** 640,646 **** + + curbuf->b_changed = 0; + curbuf->b_p_ma = FALSE; +! curwin->w_cursor.lnum = 0; + curwin->w_cursor.col = 0; + + if (curwin != curwin_save && win_valid(curwin_save)) +--- 640,646 ---- + + curbuf->b_changed = 0; + curbuf->b_p_ma = FALSE; +! curwin->w_cursor.lnum = 1; + curwin->w_cursor.col = 0; + + if (curwin != curwin_save && win_valid(curwin_save)) +*** ../vim-7.2.395/src/version.c 2010-03-17 13:07:01.000000000 +0100 +--- src/version.c 2010-03-17 14:47:30.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 396, + /**/ + +-- +There are 10 kinds of people: Those who understand binary and those who don't. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.397 b/source/ap/vim/patches/7.2.397 new file mode 100644 index 000000000..218a069a4 --- /dev/null +++ b/source/ap/vim/patches/7.2.397 @@ -0,0 +1,67 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.397 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.397 +Problem: Redundant check for w_lines_valid. +Solution: Remove the if. (Lech Lorens) +Files: src/fold.c + + +*** ../vim-7.2.396/src/fold.c 2010-02-24 14:34:10.000000000 +0100 +--- src/fold.c 2010-03-17 13:03:00.000000000 +0100 +*************** +*** 1053,1067 **** + { + int i; + +! if (win->w_lines_valid > 0) +! for (i = 0; i < win->w_lines_valid; ++i) +! if (win->w_lines[i].wl_valid) +! { +! if (lnum < win->w_lines[i].wl_lnum) +! return -1; +! if (lnum <= win->w_lines[i].wl_lastlnum) +! return i; +! } + return -1; + } + +--- 1053,1066 ---- + { + int i; + +! for (i = 0; i < win->w_lines_valid; ++i) +! if (win->w_lines[i].wl_valid) +! { +! if (lnum < win->w_lines[i].wl_lnum) +! return -1; +! if (lnum <= win->w_lines[i].wl_lastlnum) +! return i; +! } + return -1; + } + +*** ../vim-7.2.396/src/version.c 2010-03-17 14:47:56.000000000 +0100 +--- src/version.c 2010-03-17 16:43:34.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 397, + /**/ + +-- +Did you ever stop to think... and forget to start again? + -- Steven Wright + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.398 b/source/ap/vim/patches/7.2.398 new file mode 100644 index 000000000..a0ccc96c3 --- /dev/null +++ b/source/ap/vim/patches/7.2.398 @@ -0,0 +1,152 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.398 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.398 +Problem: When moving windows the cursor ends up in the wrong line. +Solution: Set the window width and height properly. (Lech Lorens) +Files: src/window.c + + +*** ../vim-7.2.397/src/window.c 2010-01-27 20:26:41.000000000 +0100 +--- src/window.c 2010-03-17 16:40:06.000000000 +0100 +*************** +*** 991,1018 **** + wp->w_p_scr = curwin->w_p_scr; + if (need_status) + { +! --oldwin->w_height; + oldwin->w_status_height = need_status; + } + if (flags & (WSP_TOP | WSP_BOT)) + { + /* set height and row of new window to full height */ + wp->w_winrow = tabline_height(); +! wp->w_height = curfrp->fr_height - (p_ls > 0); + wp->w_status_height = (p_ls > 0); + } + else + { + /* height and row of new window is same as current window */ + wp->w_winrow = oldwin->w_winrow; +! wp->w_height = oldwin->w_height; + wp->w_status_height = oldwin->w_status_height; + } + frp->fr_height = curfrp->fr_height; + + /* "new_size" of the current window goes to the new window, use + * one column for the vertical separator */ +! wp->w_width = new_size; + if (before) + wp->w_vsep_width = 1; + else +--- 991,1018 ---- + wp->w_p_scr = curwin->w_p_scr; + if (need_status) + { +! win_new_height(oldwin, oldwin->w_height - 1); + oldwin->w_status_height = need_status; + } + if (flags & (WSP_TOP | WSP_BOT)) + { + /* set height and row of new window to full height */ + wp->w_winrow = tabline_height(); +! win_new_height(wp, curfrp->fr_height - (p_ls > 0)); + wp->w_status_height = (p_ls > 0); + } + else + { + /* height and row of new window is same as current window */ + wp->w_winrow = oldwin->w_winrow; +! win_new_height(wp, oldwin->w_height); + wp->w_status_height = oldwin->w_status_height; + } + frp->fr_height = curfrp->fr_height; + + /* "new_size" of the current window goes to the new window, use + * one column for the vertical separator */ +! win_new_width(wp, new_size); + if (before) + wp->w_vsep_width = 1; + else +*************** +*** 1049,1061 **** + if (flags & (WSP_TOP | WSP_BOT)) + { + wp->w_wincol = 0; +! wp->w_width = Columns; + wp->w_vsep_width = 0; + } + else + { + wp->w_wincol = oldwin->w_wincol; +! wp->w_width = oldwin->w_width; + wp->w_vsep_width = oldwin->w_vsep_width; + } + frp->fr_width = curfrp->fr_width; +--- 1049,1061 ---- + if (flags & (WSP_TOP | WSP_BOT)) + { + wp->w_wincol = 0; +! win_new_width(wp, Columns); + wp->w_vsep_width = 0; + } + else + { + wp->w_wincol = oldwin->w_wincol; +! win_new_width(wp, oldwin->w_width); + wp->w_vsep_width = oldwin->w_vsep_width; + } + frp->fr_width = curfrp->fr_width; +*************** +*** 1111,1117 **** + } + + /* +! * make the new window the current window and redraw + */ + if (do_equal || dir != 0) + win_equal(wp, TRUE, +--- 1111,1117 ---- + } + + /* +! * equalize the window sizes. + */ + if (do_equal || dir != 0) + win_equal(wp, TRUE, +*************** +*** 1143,1148 **** +--- 1143,1152 ---- + if (size != 0) + p_wh = size; + } ++ ++ /* ++ * make the new window the current window ++ */ + win_enter(wp, FALSE); + #ifdef FEAT_VERTSPLIT + if (flags & WSP_VERT) +*** ../vim-7.2.397/src/version.c 2010-03-17 16:45:04.000000000 +0100 +--- src/version.c 2010-03-17 16:53:51.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 398, + /**/ + +-- +It's not hard to meet expenses, they're everywhere. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.399 b/source/ap/vim/patches/7.2.399 new file mode 100644 index 000000000..16ffa0f41 --- /dev/null +++ b/source/ap/vim/patches/7.2.399 @@ -0,0 +1,63 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.399 (extra) +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.399 (extra, after 7.2.388) +Problem: Cannot compile on MingW. +Solution: Move ifneq to separate line. (Vlad Sandrini, Dominique Pelle) +Files: src/Make_ming.mak + + +*** ../vim-7.2.398/src/Make_ming.mak 2010-03-10 13:19:28.000000000 +0100 +--- src/Make_ming.mak 2010-03-17 17:23:31.000000000 +0100 +*************** +*** 215,226 **** + ifndef RUBY_PLATFORM + ifeq ($(RUBY_VER), 16) + RUBY_PLATFORM = i586-mswin32 +! else ifneq ("X$(wildcard, $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/i386-mingw32)", X) + RUBY_PLATFORM = i386-mingw32 + else + RUBY_PLATFORM = i386-mswin32 + endif + endif + + ifndef RUBY_INSTALL_NAME + ifeq ($(RUBY_VER), 16) +--- 215,228 ---- + ifndef RUBY_PLATFORM + ifeq ($(RUBY_VER), 16) + RUBY_PLATFORM = i586-mswin32 +! else +! ifneq ($(wildcard $(RUBY)/lib/ruby/$(RUBY_VER_LONG)/i386-mingw32),) + RUBY_PLATFORM = i386-mingw32 + else + RUBY_PLATFORM = i386-mswin32 + endif + endif ++ endif + + ifndef RUBY_INSTALL_NAME + ifeq ($(RUBY_VER), 16) +*** ../vim-7.2.398/src/version.c 2010-03-17 16:54:51.000000000 +0100 +--- src/version.c 2010-03-17 17:23:40.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 399, + /**/ + +-- +Life is a gift, living is an art. (Bram Moolenaar) + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.400 b/source/ap/vim/patches/7.2.400 new file mode 100644 index 000000000..0c3c5487d --- /dev/null +++ b/source/ap/vim/patches/7.2.400 @@ -0,0 +1,454 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.400 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.400 (after 7.2.387) +Problem: Dynamic Ruby is not initialised properly for version 1.9.1. + Ruby cannot create strings from NULL. +Solution: Cleanup #ifdefs. Handle NULL like an empty string. Add + ruby_init_stack. (Sergey Khorev) +Files: src/if_ruby.c + + +*** ../vim-7.2.399/src/if_ruby.c 2010-03-10 12:46:38.000000000 +0100 +--- src/if_ruby.c 2010-03-17 17:37:53.000000000 +0100 +*************** +*** 53,58 **** +--- 53,63 ---- + # undef _WIN32_WINNT + #endif + ++ #if (defined(RUBY_VERSION) && RUBY_VERSION >= 19) \ ++ || (defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19) ++ # define RUBY19_OR_LATER 1 ++ #endif ++ + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + /* Ruby 1.9 defines a number of static functions which use rb_num2long and + * rb_int2big */ +*************** +*** 61,67 **** + #endif + + #include <ruby.h> +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + # include <ruby/encoding.h> + #endif + +--- 66,72 ---- + #endif + + #include <ruby.h> +! #ifdef RUBY19_OR_LATER + # include <ruby/encoding.h> + #endif + +*************** +*** 172,179 **** + # define rb_ary_new dll_rb_ary_new + # define rb_ary_push dll_rb_ary_push + #endif +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 \ +! || defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + # define rb_errinfo dll_rb_errinfo + #else + # define ruby_errinfo (*dll_ruby_errinfo) +--- 177,183 ---- + # define rb_ary_new dll_rb_ary_new + # define rb_ary_push dll_rb_ary_push + #endif +! #ifdef RUBY19_OR_LATER + # define rb_errinfo dll_rb_errinfo + #else + # define ruby_errinfo (*dll_ruby_errinfo) +*************** +*** 185,196 **** + # define rb_w32_snprintf dll_rb_w32_snprintf + #endif + +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + # define ruby_script dll_ruby_script + # define rb_enc_find_index dll_rb_enc_find_index + # define rb_enc_find dll_rb_enc_find + # define rb_enc_str_new dll_rb_enc_str_new + # define rb_sprintf dll_rb_sprintf + #endif + + /* +--- 189,201 ---- + # define rb_w32_snprintf dll_rb_w32_snprintf + #endif + +! #ifdef RUBY19_OR_LATER + # define ruby_script dll_ruby_script + # define rb_enc_find_index dll_rb_enc_find_index + # define rb_enc_find dll_rb_enc_find + # define rb_enc_str_new dll_rb_enc_str_new + # define rb_sprintf dll_rb_sprintf ++ # define ruby_init_stack dll_ruby_init_stack + #endif + + /* +*************** +*** 240,247 **** + static VALUE (*dll_rb_str_concat) (VALUE, VALUE); + static VALUE (*dll_rb_str_new) (const char*, long); + static VALUE (*dll_rb_str_new2) (const char*); +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 \ +! || defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + static VALUE (*dll_rb_errinfo) (void); + #else + static VALUE *dll_ruby_errinfo; +--- 245,251 ---- + static VALUE (*dll_rb_str_concat) (VALUE, VALUE); + static VALUE (*dll_rb_str_new) (const char*, long); + static VALUE (*dll_rb_str_new2) (const char*); +! #ifdef RUBY19_OR_LATER + static VALUE (*dll_rb_errinfo) (void); + #else + static VALUE *dll_ruby_errinfo; +*************** +*** 255,276 **** + static VALUE (*dll_rb_ary_new) (void); + static VALUE (*dll_rb_ary_push) (VALUE, VALUE); + #endif +! #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + static VALUE (*dll_rb_int2big)(SIGNED_VALUE); + #endif + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + static int (*dll_rb_w32_snprintf)(char*, size_t, const char*, ...); + #endif + +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + static void (*dll_ruby_script) (const char*); + static int (*dll_rb_enc_find_index) (const char*); + static rb_encoding* (*dll_rb_enc_find) (const char*); + static VALUE (*dll_rb_enc_str_new) (const char*, long, rb_encoding*); + static VALUE (*dll_rb_sprintf) (const char*, ...); + #endif + +! #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + static SIGNED_VALUE rb_num2long_stub(VALUE x) + { + return dll_rb_num2long(x); +--- 259,281 ---- + static VALUE (*dll_rb_ary_new) (void); + static VALUE (*dll_rb_ary_push) (VALUE, VALUE); + #endif +! #ifdef RUBY19_OR_LATER + static VALUE (*dll_rb_int2big)(SIGNED_VALUE); + #endif + #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 18 + static int (*dll_rb_w32_snprintf)(char*, size_t, const char*, ...); + #endif + +! #ifdef RUBY19_OR_LATER + static void (*dll_ruby_script) (const char*); + static int (*dll_rb_enc_find_index) (const char*); + static rb_encoding* (*dll_rb_enc_find) (const char*); + static VALUE (*dll_rb_enc_str_new) (const char*, long, rb_encoding*); + static VALUE (*dll_rb_sprintf) (const char*, ...); ++ static void (*ruby_init_stack)(VALUE*); + #endif + +! #ifdef RUBY19_OR_LATER + static SIGNED_VALUE rb_num2long_stub(VALUE x) + { + return dll_rb_num2long(x); +*************** +*** 336,343 **** + {"rb_str_concat", (RUBY_PROC*)&dll_rb_str_concat}, + {"rb_str_new", (RUBY_PROC*)&dll_rb_str_new}, + {"rb_str_new2", (RUBY_PROC*)&dll_rb_str_new2}, +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 \ +! || defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + {"rb_errinfo", (RUBY_PROC*)&dll_rb_errinfo}, + #else + {"ruby_errinfo", (RUBY_PROC*)&dll_ruby_errinfo}, +--- 341,347 ---- + {"rb_str_concat", (RUBY_PROC*)&dll_rb_str_concat}, + {"rb_str_new", (RUBY_PROC*)&dll_rb_str_new}, + {"rb_str_new2", (RUBY_PROC*)&dll_rb_str_new2}, +! #ifdef RUBY19_OR_LATER + {"rb_errinfo", (RUBY_PROC*)&dll_rb_errinfo}, + #else + {"ruby_errinfo", (RUBY_PROC*)&dll_ruby_errinfo}, +*************** +*** 360,374 **** + {"rb_ary_new", (RUBY_PROC*)&dll_rb_ary_new}, + {"rb_ary_push", (RUBY_PROC*)&dll_rb_ary_push}, + #endif +! #if defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + {"rb_int2big", (RUBY_PROC*)&dll_rb_int2big}, +- #endif +- #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + {"ruby_script", (RUBY_PROC*)&dll_ruby_script}, + {"rb_enc_find_index", (RUBY_PROC*)&dll_rb_enc_find_index}, + {"rb_enc_find", (RUBY_PROC*)&dll_rb_enc_find}, + {"rb_enc_str_new", (RUBY_PROC*)&dll_rb_enc_str_new}, + {"rb_sprintf", (RUBY_PROC*)&dll_rb_sprintf}, + #endif + {"", NULL}, + }; +--- 364,377 ---- + {"rb_ary_new", (RUBY_PROC*)&dll_rb_ary_new}, + {"rb_ary_push", (RUBY_PROC*)&dll_rb_ary_push}, + #endif +! #ifdef RUBY19_OR_LATER + {"rb_int2big", (RUBY_PROC*)&dll_rb_int2big}, + {"ruby_script", (RUBY_PROC*)&dll_ruby_script}, + {"rb_enc_find_index", (RUBY_PROC*)&dll_rb_enc_find_index}, + {"rb_enc_find", (RUBY_PROC*)&dll_rb_enc_find}, + {"rb_enc_str_new", (RUBY_PROC*)&dll_rb_enc_str_new}, + {"rb_sprintf", (RUBY_PROC*)&dll_rb_sprintf}, ++ {"ruby_init_stack", (RUBY_PROC*)&dll_ruby_init_stack}, + #endif + {"", NULL}, + }; +*************** +*** 467,473 **** + static VALUE + vim_str2rb_enc_str(const char *s) + { +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + int isnum; + long lval; + char_u *sval; +--- 470,476 ---- + static VALUE + vim_str2rb_enc_str(const char *s) + { +! #ifdef RUBY19_OR_LATER + int isnum; + long lval; + char_u *sval; +*************** +*** 489,495 **** + static VALUE + eval_enc_string_protect(const char *str, int *state) + { +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + int isnum; + long lval; + char_u *sval; +--- 492,498 ---- + static VALUE + eval_enc_string_protect(const char *str, int *state) + { +! #ifdef RUBY19_OR_LATER + int isnum; + long lval; + char_u *sval; +*************** +*** 591,606 **** + char *argv[] = {"gvim.exe"}; + NtInitialize(&argc, &argv); + #endif +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + RUBY_INIT_STACK; + #endif + ruby_init(); +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + ruby_script("vim-ruby"); + #endif + ruby_init_loadpath(); + ruby_io_init(); +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 + rb_enc_find_index("encdb"); + #endif + ruby_vim_init(); +--- 594,609 ---- + char *argv[] = {"gvim.exe"}; + NtInitialize(&argc, &argv); + #endif +! #ifdef RUBY19_OR_LATER + RUBY_INIT_STACK; + #endif + ruby_init(); +! #ifdef RUBY19_OR_LATER + ruby_script("vim-ruby"); + #endif + ruby_init_loadpath(); + ruby_io_init(); +! #ifdef RUBY19_OR_LATER + rb_enc_find_index("encdb"); + #endif + ruby_vim_init(); +*************** +*** 657,664 **** + break; + case TAG_RAISE: + case TAG_FATAL: +! #if defined(RUBY_VERSION) && RUBY_VERSION >= 19 \ +! || defined(DYNAMIC_RUBY_VER) && DYNAMIC_RUBY_VER >= 19 + eclass = CLASS_OF(rb_errinfo()); + einfo = rb_obj_as_string(rb_errinfo()); + #else +--- 660,666 ---- + break; + case TAG_RAISE: + case TAG_FATAL: +! #ifdef RUBY19_OR_LATER + eclass = CLASS_OF(rb_errinfo()); + einfo = rb_obj_as_string(rb_errinfo()); + #else +*************** +*** 720,775 **** + + if (tv->v_type == VAR_STRING) + { +! result = rb_str_new2((char *)tv->vval.v_string); + } + else if (tv->v_type == VAR_NUMBER) + { +! result = INT2NUM(tv->vval.v_number); + } + # ifdef FEAT_FLOAT + else if (tv->v_type == VAR_FLOAT) + { +! result = rb_float_new(tv->vval.v_float); + } + # endif + else if (tv->v_type == VAR_LIST) + { +! list_T *list = tv->vval.v_list; +! listitem_T *curr; + +! result = rb_ary_new(); + +! if (list != NULL) +! { +! for (curr = list->lv_first; curr != NULL; curr = curr->li_next) +! { +! rb_ary_push(result, vim_to_ruby(&curr->li_tv)); +! } +! } + } + else if (tv->v_type == VAR_DICT) + { +! result = rb_hash_new(); + +! if (tv->vval.v_dict != NULL) +! { +! hashtab_T *ht = &tv->vval.v_dict->dv_hashtab; +! long_u todo = ht->ht_used; +! hashitem_T *hi; +! dictitem_T *di; +! +! for (hi = ht->ht_array; todo > 0; ++hi) +! { +! if (!HASHITEM_EMPTY(hi)) +! { +! --todo; + +! di = dict_lookup(hi); +! rb_hash_aset(result, rb_str_new2((char *)hi->hi_key), + vim_to_ruby(&di->di_tv)); +! } +! } +! } + } /* else return Qnil; */ + + return result; +--- 722,778 ---- + + if (tv->v_type == VAR_STRING) + { +! result = rb_str_new2((char *)(tv->vval.v_string == NULL +! ? "" : tv->vval.v_string)); + } + else if (tv->v_type == VAR_NUMBER) + { +! result = INT2NUM(tv->vval.v_number); + } + # ifdef FEAT_FLOAT + else if (tv->v_type == VAR_FLOAT) + { +! result = rb_float_new(tv->vval.v_float); + } + # endif + else if (tv->v_type == VAR_LIST) + { +! list_T *list = tv->vval.v_list; +! listitem_T *curr; + +! result = rb_ary_new(); + +! if (list != NULL) +! { +! for (curr = list->lv_first; curr != NULL; curr = curr->li_next) +! { +! rb_ary_push(result, vim_to_ruby(&curr->li_tv)); +! } +! } + } + else if (tv->v_type == VAR_DICT) + { +! result = rb_hash_new(); + +! if (tv->vval.v_dict != NULL) +! { +! hashtab_T *ht = &tv->vval.v_dict->dv_hashtab; +! long_u todo = ht->ht_used; +! hashitem_T *hi; +! dictitem_T *di; +! +! for (hi = ht->ht_array; todo > 0; ++hi) +! { +! if (!HASHITEM_EMPTY(hi)) +! { +! --todo; + +! di = dict_lookup(hi); +! rb_hash_aset(result, rb_str_new2((char *)hi->hi_key), + vim_to_ruby(&di->di_tv)); +! } +! } +! } + } /* else return Qnil; */ + + return result; +*************** +*** 785,791 **** + tv = eval_expr((char_u *)StringValuePtr(str), NULL); + if (tv == NULL) + { +! return Qnil; + } + result = vim_to_ruby(tv); + +--- 788,794 ---- + tv = eval_expr((char_u *)StringValuePtr(str), NULL); + if (tv == NULL) + { +! return Qnil; + } + result = vim_to_ruby(tv); + +*** ../vim-7.2.399/src/version.c 2010-03-17 17:24:58.000000000 +0100 +--- src/version.c 2010-03-17 18:14:31.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 400, + /**/ + +-- +Q: What do you call a fish without an eye? +A: fsh! +Q: What do you call a deer with no eyes? +A: no eye deer. +Q: What do you call a deer with no eyes and no legs? +A: still no eye deer. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.401 b/source/ap/vim/patches/7.2.401 new file mode 100644 index 000000000..032076abd --- /dev/null +++ b/source/ap/vim/patches/7.2.401 @@ -0,0 +1,61 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.401 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.401 +Problem: ":e dir<Tab>" with 'wildmode' set to "list" doesn't highlight + directory names with a space. (Alexandre Provencio) +Solution: Remove the backslash before checking if the name is a directory. + (Dominique Pelle) +Files: src/ex_getln.c + + +*** ../vim-7.2.400/src/ex_getln.c 2010-03-02 17:23:10.000000000 +0100 +--- src/ex_getln.c 2010-03-17 19:00:54.000000000 +0100 +*************** +*** 3948,3955 **** + || xp->xp_context == EXPAND_SHELLCMD + || xp->xp_context == EXPAND_BUFFERS) + { +! /* highlight directories */ +! j = (mch_isdir(files_found[k])); + if (showtail) + p = L_SHOWFILE(k); + else +--- 3948,3959 ---- + || xp->xp_context == EXPAND_SHELLCMD + || xp->xp_context == EXPAND_BUFFERS) + { +! char_u *halved_slash; +! +! /* highlight directories */ +! halved_slash = backslash_halve_save(files_found[k]); +! j = mch_isdir(halved_slash); +! vim_free(halved_slash); + if (showtail) + p = L_SHOWFILE(k); + else +*** ../vim-7.2.400/src/version.c 2010-03-17 18:15:17.000000000 +0100 +--- src/version.c 2010-03-17 19:12:22.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 401, + /**/ + +-- +Two cows are standing together in a field. One asks the other: +"So what do you think about this Mad Cow Disease?" +The other replies: "That doesn't concern me. I'm a helicopter." + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.402 b/source/ap/vim/patches/7.2.402 new file mode 100644 index 000000000..7c256bb16 --- /dev/null +++ b/source/ap/vim/patches/7.2.402 @@ -0,0 +1,91 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.402 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.402 +Problem: This gives a #705 error: let X = function('haslocaldir') + let X = function('getcwd') +Solution: Don't give E705 when the name is found in the hashtab. (Sergey + Khorev) +Files: src/eval.c + + +*** ../vim-7.2.401/src/eval.c 2010-03-10 13:43:22.000000000 +0100 +--- src/eval.c 2010-03-17 19:35:01.000000000 +0100 +*************** +*** 19103,19108 **** +--- 19103,19116 ---- + hashtab_T *ht; + char_u *p; + ++ ht = find_var_ht(name, &varname); ++ if (ht == NULL || *varname == NUL) ++ { ++ EMSG2(_(e_illvar), name); ++ return; ++ } ++ v = find_var_in_ht(ht, varname, TRUE); ++ + if (tv->v_type == VAR_FUNC) + { + if (!(vim_strchr((char_u *)"wbs", name[0]) != NULL && name[1] == ':') +*************** +*** 19112,19118 **** + EMSG2(_("E704: Funcref variable name must start with a capital: %s"), name); + return; + } +! if (function_exists(name)) + { + EMSG2(_("E705: Variable name conflicts with existing function: %s"), + name); +--- 19120,19129 ---- + EMSG2(_("E704: Funcref variable name must start with a capital: %s"), name); + return; + } +! /* Don't allow hiding a function. When "v" is not NULL we migth be +! * assigning another function to the same var, the type is checked +! * below. */ +! if (v == NULL && function_exists(name)) + { + EMSG2(_("E705: Variable name conflicts with existing function: %s"), + name); +*************** +*** 19120,19133 **** + } + } + +- ht = find_var_ht(name, &varname); +- if (ht == NULL || *varname == NUL) +- { +- EMSG2(_(e_illvar), name); +- return; +- } +- +- v = find_var_in_ht(ht, varname, TRUE); + if (v != NULL) + { + /* existing variable, need to clear the value */ +--- 19131,19136 ---- +*** ../vim-7.2.401/src/version.c 2010-03-17 19:13:19.000000000 +0100 +--- src/version.c 2010-03-17 19:36:09.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 402, + /**/ + +-- +Michael: There is no such thing as a dump question. +Bernard: Sure there is. For example "what is a core dump?" + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.403 b/source/ap/vim/patches/7.2.403 new file mode 100644 index 000000000..d2949dbc0 --- /dev/null +++ b/source/ap/vim/patches/7.2.403 @@ -0,0 +1,53 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.403 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.403 (after 7.2.400) +Problem: Compiler warning for pointer type. (Tony Mechelynck) +Solution: Move type cast to the right place. +Files: src/if_ruby.c + + +*** ../vim-7.2.402/src/if_ruby.c 2010-03-17 18:15:17.000000000 +0100 +--- src/if_ruby.c 2010-03-19 23:08:06.000000000 +0100 +*************** +*** 722,729 **** + + if (tv->v_type == VAR_STRING) + { +! result = rb_str_new2((char *)(tv->vval.v_string == NULL +! ? "" : tv->vval.v_string)); + } + else if (tv->v_type == VAR_NUMBER) + { +--- 722,729 ---- + + if (tv->v_type == VAR_STRING) + { +! result = rb_str_new2(tv->vval.v_string == NULL +! ? "" : (char *)(tv->vval.v_string)); + } + else if (tv->v_type == VAR_NUMBER) + { +*** ../vim-7.2.402/src/version.c 2010-03-17 19:53:44.000000000 +0100 +--- src/version.c 2010-03-19 23:07:13.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 403, + /**/ + +-- +If "R" is Reverse, how come "D" is FORWARD? + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.404 b/source/ap/vim/patches/7.2.404 new file mode 100644 index 000000000..fa1a0b6b4 --- /dev/null +++ b/source/ap/vim/patches/7.2.404 @@ -0,0 +1,54 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.404 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.404 +Problem: Pointers for composing characters are not properly initialized. +Solution: Compute the size of the pointer, not what it points to. (Yukihiro + Nakadaira) +Files: src/screen.c + + +*** ../vim-7.2.403/src/screen.c 2010-02-03 15:47:59.000000000 +0100 +--- src/screen.c 2010-03-23 13:48:05.000000000 +0100 +*************** +*** 7536,7542 **** + new_ScreenLines = (schar_T *)lalloc((long_u)( + (Rows + 1) * Columns * sizeof(schar_T)), FALSE); + #ifdef FEAT_MBYTE +! vim_memset(new_ScreenLinesC, 0, sizeof(u8char_T) * MAX_MCO); + if (enc_utf8) + { + new_ScreenLinesUC = (u8char_T *)lalloc((long_u)( +--- 7536,7542 ---- + new_ScreenLines = (schar_T *)lalloc((long_u)( + (Rows + 1) * Columns * sizeof(schar_T)), FALSE); + #ifdef FEAT_MBYTE +! vim_memset(new_ScreenLinesC, 0, sizeof(u8char_T *) * MAX_MCO); + if (enc_utf8) + { + new_ScreenLinesUC = (u8char_T *)lalloc((long_u)( +*** ../vim-7.2.403/src/version.c 2010-03-19 23:08:22.000000000 +0100 +--- src/version.c 2010-03-23 13:54:47.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 404, + /**/ + +-- +LAUNCELOT: Isn't there a St. Aaaaarrrrrrggghhh's in Cornwall? +ARTHUR: No, that's Saint Ives. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.405 b/source/ap/vim/patches/7.2.405 new file mode 100644 index 000000000..b79a19aa9 --- /dev/null +++ b/source/ap/vim/patches/7.2.405 @@ -0,0 +1,48 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.405 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.405 +Problem: When built with small features the matching text is not + highlighted for ":s/pat/repl/c". +Solution: Remove the #ifdef for IncSearch. (James Vega) +Files: src/syntax.c + + +*** ../vim-7.2.404/src/syntax.c 2010-03-10 13:43:22.000000000 +0100 +--- src/syntax.c 2010-03-23 14:36:10.000000000 +0100 +*************** +*** 6205,6214 **** + { + CENT("ErrorMsg term=standout ctermbg=DarkRed ctermfg=White", + "ErrorMsg term=standout ctermbg=DarkRed ctermfg=White guibg=Red guifg=White"), +- #ifdef FEAT_SEARCH_EXTRA + CENT("IncSearch term=reverse cterm=reverse", + "IncSearch term=reverse cterm=reverse gui=reverse"), +- #endif + CENT("ModeMsg term=bold cterm=bold", + "ModeMsg term=bold cterm=bold gui=bold"), + CENT("NonText term=bold ctermfg=Blue", +--- 6205,6212 ---- +*** ../vim-7.2.404/src/version.c 2010-03-23 13:56:53.000000000 +0100 +--- src/version.c 2010-03-23 14:37:08.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 405, + /**/ + +-- +Dreams are free, but there's a small charge for alterations. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.406 b/source/ap/vim/patches/7.2.406 new file mode 100644 index 000000000..cff265f52 --- /dev/null +++ b/source/ap/vim/patches/7.2.406 @@ -0,0 +1,123 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.406 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.406 +Problem: Patch 7.2.119 introduces uninit mem read. (Dominique Pelle) +Solution: Only used ScreeenLinesC when ScreeenLinesUC is not zero. (Yukihiro + Nakadaira) Also clear ScreeenLinesC when allocating. +Files: src/screen.c + + +*** ../vim-7.2.405/src/screen.c 2010-03-23 13:56:53.000000000 +0100 +--- src/screen.c 2010-03-23 15:26:44.000000000 +0100 +*************** +*** 25,34 **** + * one character which occupies two display cells. + * For UTF-8 a multi-byte character is converted to Unicode and stored in + * ScreenLinesUC[]. ScreenLines[] contains the first byte only. For an ASCII +! * character without composing chars ScreenLinesUC[] will be 0. When the +! * character occupies two display cells the next byte in ScreenLines[] is 0. + * ScreenLinesC[][] contain up to 'maxcombine' composing characters +! * (drawn on top of the first character). They are 0 when not used. + * ScreenLines2[] is only used for euc-jp to store the second byte if the + * first byte is 0x8e (single-width character). + * +--- 25,35 ---- + * one character which occupies two display cells. + * For UTF-8 a multi-byte character is converted to Unicode and stored in + * ScreenLinesUC[]. ScreenLines[] contains the first byte only. For an ASCII +! * character without composing chars ScreenLinesUC[] will be 0 and +! * ScreenLinesC[][] is not used. When the character occupies two display +! * cells the next byte in ScreenLines[] is 0. + * ScreenLinesC[][] contain up to 'maxcombine' composing characters +! * (drawn on top of the first character). There is 0 after the last one used. + * ScreenLines2[] is only used for euc-jp to store the second byte if the + * first byte is 0x8e (single-width character). + * +*************** +*** 4893,4898 **** +--- 4894,4900 ---- + + /* + * Return if the composing characters at "off_from" and "off_to" differ. ++ * Only to be used when ScreenLinesUC[off_from] != 0. + */ + static int + comp_char_differs(off_from, off_to) +*************** +*** 6281,6286 **** +--- 6283,6289 ---- + /* + * Return TRUE if composing characters for screen posn "off" differs from + * composing characters in "u8cc". ++ * Only to be used when ScreenLinesUC[off] != 0. + */ + static int + screen_comp_differs(off, u8cc) +*************** +*** 6461,6468 **** + && c == 0x8e + && ScreenLines2[off] != ptr[1]) + || (enc_utf8 +! && (ScreenLinesUC[off] != (u8char_T)(c >= 0x80 ? u8c : 0) +! || screen_comp_differs(off, u8cc))) + #endif + || ScreenAttrs[off] != attr + || exmode_active; +--- 6464,6473 ---- + && c == 0x8e + && ScreenLines2[off] != ptr[1]) + || (enc_utf8 +! && (ScreenLinesUC[off] != +! (u8char_T)(c < 0x80 && u8cc[0] == 0 ? 0 : u8c) +! || (ScreenLinesUC[off] != 0 +! && screen_comp_differs(off, u8cc)))) + #endif + || ScreenAttrs[off] != attr + || exmode_active; +*************** +*** 7542,7548 **** + new_ScreenLinesUC = (u8char_T *)lalloc((long_u)( + (Rows + 1) * Columns * sizeof(u8char_T)), FALSE); + for (i = 0; i < p_mco; ++i) +! new_ScreenLinesC[i] = (u8char_T *)lalloc((long_u)( + (Rows + 1) * Columns * sizeof(u8char_T)), FALSE); + } + if (enc_dbcs == DBCS_JPNU) +--- 7547,7553 ---- + new_ScreenLinesUC = (u8char_T *)lalloc((long_u)( + (Rows + 1) * Columns * sizeof(u8char_T)), FALSE); + for (i = 0; i < p_mco; ++i) +! new_ScreenLinesC[i] = (u8char_T *)lalloc_clear((long_u)( + (Rows + 1) * Columns * sizeof(u8char_T)), FALSE); + } + if (enc_dbcs == DBCS_JPNU) +*** ../vim-7.2.405/src/version.c 2010-03-23 14:39:07.000000000 +0100 +--- src/version.c 2010-03-23 15:34:11.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 406, + /**/ + +-- +VOICE OVER: As the horrendous Black Beast lunged forward, escape for Arthur + and his knights seemed hopeless, when, suddenly ... the animator + suffered a fatal heart attack. +ANIMATOR: Aaaaagh! +VOICE OVER: The cartoon peril was no more ... The Quest for Holy Grail could + continue. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.407 b/source/ap/vim/patches/7.2.407 new file mode 100644 index 000000000..0237a9d13 --- /dev/null +++ b/source/ap/vim/patches/7.2.407 @@ -0,0 +1,69 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.407 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.407 +Problem: When using an expression in ":s" backslashes in the result are + dropped. (Sergey Goldgaber, Christian Brabandt) +Solution: Double backslashes. +Files: src/regexp.c + + +*** ../vim-7.2.406/src/regexp.c 2009-11-26 20:41:19.000000000 +0100 +--- src/regexp.c 2010-03-23 16:22:35.000000000 +0100 +*************** +*** 6963,6968 **** +--- 6963,6970 ---- + eval_result = eval_to_string(source + 2, NULL, TRUE); + if (eval_result != NULL) + { ++ int had_backslash = FALSE; ++ + for (s = eval_result; *s != NUL; mb_ptr_adv(s)) + { + /* Change NL to CR, so that it becomes a line break. +*************** +*** 6970,6976 **** +--- 6972,6991 ---- + if (*s == NL) + *s = CAR; + else if (*s == '\\' && s[1] != NUL) ++ { + ++s; ++ had_backslash = TRUE; ++ } ++ } ++ if (had_backslash && backslash) ++ { ++ /* Backslashes will be consumed, need to double them. */ ++ s = vim_strsave_escaped(eval_result, (char_u *)"\\"); ++ if (s != NULL) ++ { ++ vim_free(eval_result); ++ eval_result = s; ++ } + } + + dst += STRLEN(eval_result); +*** ../vim-7.2.406/src/version.c 2010-03-23 15:36:29.000000000 +0100 +--- src/version.c 2010-03-23 16:26:22.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 407, + /**/ + +-- +Sorry, no fortune today. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.408 b/source/ap/vim/patches/7.2.408 new file mode 100644 index 000000000..25ac3a9c3 --- /dev/null +++ b/source/ap/vim/patches/7.2.408 @@ -0,0 +1,73 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.408 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.408 +Problem: With ":g/the/s/foo/bar/" the '[ and '] marks can be set to a line + that was not changed. +Solution: Only set '[ and '] marks when a substitution was done. +Files: src/ex_cmds.c + + +*** ../vim-7.2.407/src/ex_cmds.c 2009-07-09 20:06:30.000000000 +0200 +--- src/ex_cmds.c 2010-03-23 17:31:17.000000000 +0100 +*************** +*** 4238,4243 **** +--- 4238,4244 ---- + char_u *sub_firstline; /* allocated copy of first sub line */ + int endcolumn = FALSE; /* cursor in last column when done */ + pos_T old_cursor = curwin->w_cursor; ++ int start_nsubs; + + cmd = eap->arg; + if (!global_busy) +*************** +*** 4245,4250 **** +--- 4246,4252 ---- + sub_nsubs = 0; + sub_nlines = 0; + } ++ start_nsubs = sub_nsubs; + + if (eap->cmdidx == CMD_tilde) + which_pat = RE_LAST; /* use last used regexp */ +*************** +*** 5106,5112 **** + if (do_count) + curwin->w_cursor = old_cursor; + +! if (sub_nsubs) + { + /* Set the '[ and '] marks. */ + curbuf->b_op_start.lnum = eap->line1; +--- 5108,5114 ---- + if (do_count) + curwin->w_cursor = old_cursor; + +! if (sub_nsubs > start_nsubs) + { + /* Set the '[ and '] marks. */ + curbuf->b_op_start.lnum = eap->line1; +*** ../vim-7.2.407/src/version.c 2010-03-23 16:27:15.000000000 +0100 +--- src/version.c 2010-03-23 17:35:40.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 408, + /**/ + +-- +Permission is granted to read this message out aloud on Kings Cross Road, +London, under the condition that the orator is properly dressed. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.409 b/source/ap/vim/patches/7.2.409 new file mode 100644 index 000000000..fdda4a001 --- /dev/null +++ b/source/ap/vim/patches/7.2.409 @@ -0,0 +1,60 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.409 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.409 +Problem: Summary of number of substitutes is incorrect for ":folddo". (Jean + Johner) +Solution: Reset sub_nsubs and sub_nlines in global_exe(). +Files: src/ex_cmds.c + + +*** ../vim-7.2.408/src/ex_cmds.c 2010-03-23 17:36:24.000000000 +0100 +--- src/ex_cmds.c 2010-03-23 17:42:49.000000000 +0100 +*************** +*** 5238,5245 **** + type = *eap->cmd; + cmd = eap->arg; + which_pat = RE_LAST; /* default: use last used regexp */ +- sub_nsubs = 0; +- sub_nlines = 0; + + /* + * undocumented vi feature: +--- 5238,5243 ---- +*************** +*** 5343,5348 **** +--- 5341,5348 ---- + /* When the command writes a message, don't overwrite the command. */ + msg_didout = TRUE; + ++ sub_nsubs = 0; ++ sub_nlines = 0; + global_need_beginline = FALSE; + global_busy = 1; + old_lcount = curbuf->b_ml.ml_line_count; +*** ../vim-7.2.408/src/version.c 2010-03-23 17:36:24.000000000 +0100 +--- src/version.c 2010-03-23 17:47:53.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 409, + /**/ + +-- +BRIDGEKEEPER: What is your favorite colour? +LAUNCELOT: Blue. +BRIDGEKEEPER: Right. Off you go. + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.410 b/source/ap/vim/patches/7.2.410 new file mode 100644 index 000000000..660b06810 --- /dev/null +++ b/source/ap/vim/patches/7.2.410 @@ -0,0 +1,78 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.410 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.410 +Problem: Highlighting directories for completion doesn't work properly. +Solution: Don't halve backslashes when not needed, expaned "~/". + (Dominique Pelle) +Files: src/ex_getln.c + + +*** ../vim-7.2.409/src/ex_getln.c 2010-03-17 19:13:19.000000000 +0100 +--- src/ex_getln.c 2010-03-23 18:00:56.000000000 +0100 +*************** +*** 3948,3959 **** + || xp->xp_context == EXPAND_SHELLCMD + || xp->xp_context == EXPAND_BUFFERS) + { +- char_u *halved_slash; +- + /* highlight directories */ +! halved_slash = backslash_halve_save(files_found[k]); +! j = mch_isdir(halved_slash); +! vim_free(halved_slash); + if (showtail) + p = L_SHOWFILE(k); + else +--- 3948,3973 ---- + || xp->xp_context == EXPAND_SHELLCMD + || xp->xp_context == EXPAND_BUFFERS) + { + /* highlight directories */ +! if (xp->xp_numfiles != -1) +! { +! char_u *halved_slash; +! char_u *exp_path; +! +! /* Expansion was done before and special characters +! * were escaped, need to halve backslashes. Also +! * $HOME has been replaced with ~/. */ +! exp_path = expand_env_save_opt(files_found[k], TRUE); +! halved_slash = backslash_halve_save( +! exp_path != NULL ? exp_path : files_found[k]); +! j = mch_isdir(halved_slash != NULL ? halved_slash +! : files_found[k]); +! vim_free(exp_path); +! vim_free(halved_slash); +! } +! else +! /* Expansion was done here, file names are literal. */ +! j = mch_isdir(files_found[k]); + if (showtail) + p = L_SHOWFILE(k); + else +*** ../vim-7.2.409/src/version.c 2010-03-23 17:49:19.000000000 +0100 +--- src/version.c 2010-03-23 18:04:25.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 410, + /**/ + +-- +BRIDGEKEEPER: What is your favorite colour? +GAWAIN: Blue ... No yelloooooww! + "Monty Python and the Holy Grail" PYTHON (MONTY) PICTURES LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.411 b/source/ap/vim/patches/7.2.411 new file mode 100644 index 000000000..4a619ee7d --- /dev/null +++ b/source/ap/vim/patches/7.2.411 @@ -0,0 +1,47 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.411 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.411 +Problem: When parsing 'cino' a comma isn't skipped properly. +Solution: Skip the comma. (Lech Lorens) +Files: src/misc1.c + + +*** ../vim-7.2.410/src/misc1.c 2010-03-02 12:37:01.000000000 +0100 +--- src/misc1.c 2010-03-23 18:18:15.000000000 +0100 +*************** +*** 6270,6275 **** +--- 6270,6277 ---- + case 'l': ind_keep_case_label = n; break; + case '#': ind_hash_comment = n; break; + } ++ if (*options == ',') ++ ++options; + } + + /* remember where the cursor was when we started */ +*** ../vim-7.2.410/src/version.c 2010-03-23 18:06:47.000000000 +0100 +--- src/version.c 2010-03-23 18:22:13.000000000 +0100 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 411, + /**/ + +-- +BRIDGEKEEPER: What is your favorite editor? +GAWAIN: Emacs ... No, Viiiiiiiiiiimmmmmmm! + "Monty Python and the Holy editor wars" PYTHON (MONTY) SOFTWARE LTD + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.412 b/source/ap/vim/patches/7.2.412 new file mode 100644 index 000000000..d46769504 --- /dev/null +++ b/source/ap/vim/patches/7.2.412 @@ -0,0 +1,85 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.412 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.412 +Problem: [ or ] followed by mouse click doesn't work. +Solution: Reverse check for key being a mouse event. (Dominique Pelle) +Files: src/normal.c + + +*** ../vim-7.2.411/src/normal.c 2010-03-17 13:07:01.000000000 +0100 +--- src/normal.c 2010-05-07 15:46:54.000000000 +0200 +*************** +*** 3196,3202 **** + * There are a few special cases where we want certain combinations of + * characters to be considered as a single word. These are things like + * "->", "/ *", "*=", "+=", "&=", "<=", ">=", "!=" etc. Otherwise, each +! * character is in it's own class. + */ + if (c != NUL && vim_strchr((char_u *)"-+*/%<>&|^!=", c) != NULL) + return 1; +--- 3196,3202 ---- + * There are a few special cases where we want certain combinations of + * characters to be considered as a single word. These are things like + * "->", "/ *", "*=", "+=", "&=", "<=", ">=", "!=" etc. Otherwise, each +! * character is in its own class. + */ + if (c != NUL && vim_strchr((char_u *)"-+*/%<>&|^!=", c) != NULL) + return 1; +*************** +*** 4085,4091 **** + /* + * Command character that's ignored. + * Used for CTRL-Q and CTRL-S to avoid problems with terminals that use +! * xon/xoff + */ + static void + nv_ignore(cap) +--- 4085,4091 ---- + /* + * Command character that's ignored. + * Used for CTRL-Q and CTRL-S to avoid problems with terminals that use +! * xon/xoff. + */ + static void + nv_ignore(cap) +*************** +*** 6523,6529 **** + * [ or ] followed by a middle mouse click: put selected text with + * indent adjustment. Any other button just does as usual. + */ +! else if (cap->nchar >= K_LEFTMOUSE && cap->nchar <= K_RIGHTRELEASE) + { + (void)do_mouse(cap->oap, cap->nchar, + (cap->cmdchar == ']') ? FORWARD : BACKWARD, +--- 6523,6529 ---- + * [ or ] followed by a middle mouse click: put selected text with + * indent adjustment. Any other button just does as usual. + */ +! else if (cap->nchar >= K_RIGHTRELEASE && cap->nchar <= K_LEFTMOUSE) + { + (void)do_mouse(cap->oap, cap->nchar, + (cap->cmdchar == ']') ? FORWARD : BACKWARD, +*** ../vim-7.2.411/src/version.c 2010-03-23 18:22:40.000000000 +0100 +--- src/version.c 2010-05-07 15:51:35.000000000 +0200 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 412, + /**/ + +-- +I have a drinking problem -- I don't have a drink! + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.413 b/source/ap/vim/patches/7.2.413 new file mode 100644 index 000000000..40a659257 --- /dev/null +++ b/source/ap/vim/patches/7.2.413 @@ -0,0 +1,452 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.413 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.413 +Problem: Large file support is incorrect. +Solution: Add AC_SYS_LARGEFILE to configure. (James Vega) +Files: src/configure.in, src/config.h.in, src/auto/configure + + +*** ../vim-7.2.412/src/configure.in 2010-03-10 16:27:27.000000000 +0100 +--- src/configure.in 2010-04-01 15:06:04.000000000 +0200 +*************** +*** 2669,2674 **** +--- 2669,2678 ---- + usleep utime utimes) + AC_FUNC_FSEEKO + ++ dnl define _LARGE_FILES, _FILE_OFFSET_BITS and _LARGEFILE_SOURCE when ++ dnl appropriate, so that off_t is 64 bits when needed. ++ AC_SYS_LARGEFILE ++ + dnl fstatfs() can take 2 to 4 arguments, try to use st_blksize if possible + AC_MSG_CHECKING(for st_blksize) + AC_TRY_COMPILE( +*** ../vim-7.2.412/src/config.h.in 2010-02-24 14:46:58.000000000 +0100 +--- src/config.h.in 2010-04-01 15:10:49.000000000 +0200 +*************** +*** 196,201 **** +--- 196,206 ---- + #undef HAVE_UTIME + #undef HAVE_BIND_TEXTDOMAIN_CODESET + ++ /* Define, if needed, for accessing large files. */ ++ #undef _LARGE_FILES ++ #undef _FILE_OFFSET_BITS ++ #undef _LARGEFILE_SOURCE ++ + /* Define if you do not have utime(), but do have the utimes() function. */ + #undef HAVE_UTIMES + +*** ../vim-7.2.412/src/auto/configure 2010-03-10 16:27:27.000000000 +0100 +--- src/auto/configure 2010-05-07 16:01:08.000000000 +0200 +*************** +*** 821,826 **** +--- 821,827 ---- + with_gnome + with_motif_lib + with_tlib ++ enable_largefile + enable_acl + enable_gpm + enable_sysmouse +*************** +*** 1485,1490 **** +--- 1486,1492 ---- + --enable-nextaw-check If auto-select GUI, check for neXtaw default=yes + --enable-carbon-check If auto-select GUI, check for Carbon default=yes + --disable-gtktest Do not try to compile and run a test GTK program ++ --disable-largefile omit support for large files + --disable-acl Don't check for ACL support. + --disable-gpm Don't use gpm (Linux mouse daemon). + --disable-sysmouse Don't use sysmouse (mouse in *BSD console). +*************** +*** 14345,14350 **** +--- 14347,14709 ---- + fi + + ++ # Check whether --enable-largefile was given. ++ if test "${enable_largefile+set}" = set; then ++ enableval=$enable_largefile; ++ fi ++ ++ if test "$enable_largefile" != no; then ++ ++ { $as_echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5 ++ $as_echo_n "checking for special C compiler options needed for large files... " >&6; } ++ if test "${ac_cv_sys_largefile_CC+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++ else ++ ac_cv_sys_largefile_CC=no ++ if test "$GCC" != yes; then ++ ac_save_CC=$CC ++ while :; do ++ # IRIX 6.2 and later do not support large files by default, ++ # so use the C compiler's -n32 option if that helps. ++ cat >conftest.$ac_ext <<_ACEOF ++ /* confdefs.h. */ ++ _ACEOF ++ cat confdefs.h >>conftest.$ac_ext ++ cat >>conftest.$ac_ext <<_ACEOF ++ /* end confdefs.h. */ ++ #include <sys/types.h> ++ /* Check that off_t can represent 2**63 - 1 correctly. ++ We can't simply define LARGE_OFF_T to be 9223372036854775807, ++ since some C++ compilers masquerading as C compilers ++ incorrectly reject 9223372036854775807. */ ++ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) ++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 ++ && LARGE_OFF_T % 2147483647 == 1) ++ ? 1 : -1]; ++ int ++ main () ++ { ++ ++ ; ++ return 0; ++ } ++ _ACEOF ++ rm -f conftest.$ac_objext ++ if { (ac_try="$ac_compile" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ break ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++ fi ++ ++ rm -f core conftest.err conftest.$ac_objext ++ CC="$CC -n32" ++ rm -f conftest.$ac_objext ++ if { (ac_try="$ac_compile" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_sys_largefile_CC=' -n32'; break ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++ fi ++ ++ rm -f core conftest.err conftest.$ac_objext ++ break ++ done ++ CC=$ac_save_CC ++ rm -f conftest.$ac_ext ++ fi ++ fi ++ { $as_echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5 ++ $as_echo "$ac_cv_sys_largefile_CC" >&6; } ++ if test "$ac_cv_sys_largefile_CC" != no; then ++ CC=$CC$ac_cv_sys_largefile_CC ++ fi ++ ++ { $as_echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5 ++ $as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } ++ if test "${ac_cv_sys_file_offset_bits+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++ else ++ while :; do ++ cat >conftest.$ac_ext <<_ACEOF ++ /* confdefs.h. */ ++ _ACEOF ++ cat confdefs.h >>conftest.$ac_ext ++ cat >>conftest.$ac_ext <<_ACEOF ++ /* end confdefs.h. */ ++ #include <sys/types.h> ++ /* Check that off_t can represent 2**63 - 1 correctly. ++ We can't simply define LARGE_OFF_T to be 9223372036854775807, ++ since some C++ compilers masquerading as C compilers ++ incorrectly reject 9223372036854775807. */ ++ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) ++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 ++ && LARGE_OFF_T % 2147483647 == 1) ++ ? 1 : -1]; ++ int ++ main () ++ { ++ ++ ; ++ return 0; ++ } ++ _ACEOF ++ rm -f conftest.$ac_objext ++ if { (ac_try="$ac_compile" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_sys_file_offset_bits=no; break ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++ fi ++ ++ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ cat >conftest.$ac_ext <<_ACEOF ++ /* confdefs.h. */ ++ _ACEOF ++ cat confdefs.h >>conftest.$ac_ext ++ cat >>conftest.$ac_ext <<_ACEOF ++ /* end confdefs.h. */ ++ #define _FILE_OFFSET_BITS 64 ++ #include <sys/types.h> ++ /* Check that off_t can represent 2**63 - 1 correctly. ++ We can't simply define LARGE_OFF_T to be 9223372036854775807, ++ since some C++ compilers masquerading as C compilers ++ incorrectly reject 9223372036854775807. */ ++ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) ++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 ++ && LARGE_OFF_T % 2147483647 == 1) ++ ? 1 : -1]; ++ int ++ main () ++ { ++ ++ ; ++ return 0; ++ } ++ _ACEOF ++ rm -f conftest.$ac_objext ++ if { (ac_try="$ac_compile" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_sys_file_offset_bits=64; break ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++ fi ++ ++ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_cv_sys_file_offset_bits=unknown ++ break ++ done ++ fi ++ { $as_echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5 ++ $as_echo "$ac_cv_sys_file_offset_bits" >&6; } ++ case $ac_cv_sys_file_offset_bits in #( ++ no | unknown) ;; ++ *) ++ cat >>confdefs.h <<_ACEOF ++ #define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits ++ _ACEOF ++ ;; ++ esac ++ rm -rf conftest* ++ if test $ac_cv_sys_file_offset_bits = unknown; then ++ { $as_echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5 ++ $as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } ++ if test "${ac_cv_sys_large_files+set}" = set; then ++ $as_echo_n "(cached) " >&6 ++ else ++ while :; do ++ cat >conftest.$ac_ext <<_ACEOF ++ /* confdefs.h. */ ++ _ACEOF ++ cat confdefs.h >>conftest.$ac_ext ++ cat >>conftest.$ac_ext <<_ACEOF ++ /* end confdefs.h. */ ++ #include <sys/types.h> ++ /* Check that off_t can represent 2**63 - 1 correctly. ++ We can't simply define LARGE_OFF_T to be 9223372036854775807, ++ since some C++ compilers masquerading as C compilers ++ incorrectly reject 9223372036854775807. */ ++ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) ++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 ++ && LARGE_OFF_T % 2147483647 == 1) ++ ? 1 : -1]; ++ int ++ main () ++ { ++ ++ ; ++ return 0; ++ } ++ _ACEOF ++ rm -f conftest.$ac_objext ++ if { (ac_try="$ac_compile" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_sys_large_files=no; break ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++ fi ++ ++ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ cat >conftest.$ac_ext <<_ACEOF ++ /* confdefs.h. */ ++ _ACEOF ++ cat confdefs.h >>conftest.$ac_ext ++ cat >>conftest.$ac_ext <<_ACEOF ++ /* end confdefs.h. */ ++ #define _LARGE_FILES 1 ++ #include <sys/types.h> ++ /* Check that off_t can represent 2**63 - 1 correctly. ++ We can't simply define LARGE_OFF_T to be 9223372036854775807, ++ since some C++ compilers masquerading as C compilers ++ incorrectly reject 9223372036854775807. */ ++ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) ++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 ++ && LARGE_OFF_T % 2147483647 == 1) ++ ? 1 : -1]; ++ int ++ main () ++ { ++ ++ ; ++ return 0; ++ } ++ _ACEOF ++ rm -f conftest.$ac_objext ++ if { (ac_try="$ac_compile" ++ case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++ esac ++ eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" ++ $as_echo "$ac_try_echo") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_sys_large_files=1; break ++ else ++ $as_echo "$as_me: failed program was:" >&5 ++ sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++ fi ++ ++ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_cv_sys_large_files=unknown ++ break ++ done ++ fi ++ { $as_echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5 ++ $as_echo "$ac_cv_sys_large_files" >&6; } ++ case $ac_cv_sys_large_files in #( ++ no | unknown) ;; ++ *) ++ cat >>confdefs.h <<_ACEOF ++ #define _LARGE_FILES $ac_cv_sys_large_files ++ _ACEOF ++ ;; ++ esac ++ rm -rf conftest* ++ fi ++ fi ++ ++ + { $as_echo "$as_me:$LINENO: checking for st_blksize" >&5 + $as_echo_n "checking for st_blksize... " >&6; } + cat >conftest.$ac_ext <<_ACEOF +*** ../vim-7.2.412/src/version.c 2010-05-07 15:51:59.000000000 +0200 +--- src/version.c 2010-05-07 16:04:29.000000000 +0200 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 413, + /**/ + +-- +How To Keep A Healthy Level Of Insanity: +2. Page yourself over the intercom. Don't disguise your voice. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.414 b/source/ap/vim/patches/7.2.414 new file mode 100644 index 000000000..9d5666c34 --- /dev/null +++ b/source/ap/vim/patches/7.2.414 @@ -0,0 +1,93 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.414 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.414 +Problem: CTRK-K <space> <space> does not produce 0xa0 as expected. (Tony + Mechelynck) +Solution: Remove the Unicode range 0xe000 - 0xefff from digraphs, these are + not valid characters. +Files: src/digraph.c + + +*** ../vim-7.2.413/src/digraph.c 2009-05-13 14:12:14.000000000 +0200 +--- src/digraph.c 2010-04-11 17:28:22.000000000 +0200 +*************** +*** 1933,1977 **** + {'7', 'c', 0x3226}, + {'8', 'c', 0x3227}, + {'9', 'c', 0x3228}, +! {' ', ' ', 0xe000}, +! {'/', 'c', 0xe001}, +! {'U', 'A', 0xe002}, +! {'U', 'B', 0xe003}, +! {'"', '3', 0xe004}, +! {'"', '1', 0xe005}, +! {'"', '!', 0xe006}, +! {'"', '\'', 0xe007}, +! {'"', '>', 0xe008}, +! {'"', '?', 0xe009}, +! {'"', '-', 0xe00a}, +! {'"', '(', 0xe00b}, +! {'"', '.', 0xe00c}, +! {'"', ':', 0xe00d}, +! {'"', '0', 0xe00e}, +! {'"', '"', 0xe00f}, +! {'"', '<', 0xe010}, +! {'"', ',', 0xe011}, +! {'"', ';', 0xe012}, +! {'"', '_', 0xe013}, +! {'"', '=', 0xe014}, +! {'"', '/', 0xe015}, +! {'"', 'i', 0xe016}, +! {'"', 'd', 0xe017}, +! {'"', 'p', 0xe018}, +! {';', ';', 0xe019}, +! {',', ',', 0xe01a}, +! {'b', '3', 0xe01b}, +! {'C', 'i', 0xe01c}, +! {'f', '(', 0xe01d}, +! {'e', 'd', 0xe01e}, +! {'a', 'm', 0xe01f}, +! {'p', 'm', 0xe020}, +! {'F', 'l', 0xe023}, +! {'G', 'F', 0xe024}, +! {'>', 'V', 0xe025}, +! {'!', '*', 0xe026}, +! {'?', '*', 0xe027}, +! {'J', '<', 0xe028}, + {'f', 'f', 0xfb00}, + {'f', 'i', 0xfb01}, + {'f', 'l', 0xfb02}, +--- 1933,1940 ---- + {'7', 'c', 0x3226}, + {'8', 'c', 0x3227}, + {'9', 'c', 0x3228}, +! /* code points 0xe000 - 0xefff excluded, they have no assigned +! * characters, only used in proposals. */ + {'f', 'f', 0xfb00}, + {'f', 'i', 0xfb01}, + {'f', 'l', 0xfb02}, +*** ../vim-7.2.413/src/version.c 2010-05-07 16:05:48.000000000 +0200 +--- src/version.c 2010-05-07 16:17:26.000000000 +0200 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 414, + /**/ + +-- +How To Keep A Healthy Level Of Insanity: +4. Put your garbage can on your desk and label it "in". + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.415 b/source/ap/vim/patches/7.2.415 new file mode 100644 index 000000000..87e7c0b59 --- /dev/null +++ b/source/ap/vim/patches/7.2.415 @@ -0,0 +1,69 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.415 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.415 +Problem: Win32: Can't open a remote file when starting Vim. +Solution: Don't invoke cygwin_conv_path() for URLs. (Tomoya Adachi) +Files: src/main.c + + +*** ../vim-7.2.414/src/main.c 2009-12-16 18:27:29.000000000 +0100 +--- src/main.c 2010-04-12 20:57:44.000000000 +0200 +*************** +*** 1477,1483 **** + ++initstr; + } + +! /* Avoid using evim mode for "editor". */ + if (TOLOWER_ASC(initstr[0]) == 'e' + && (TOLOWER_ASC(initstr[1]) == 'v' + || TOLOWER_ASC(initstr[1]) == 'g')) +--- 1477,1483 ---- + ++initstr; + } + +! /* Use evim mode for "evim" and "egvim", not for "editor". */ + if (TOLOWER_ASC(initstr[0]) == 'e' + && (TOLOWER_ASC(initstr[1]) == 'v' + || TOLOWER_ASC(initstr[1]) == 'g')) +*************** +*** 2262,2268 **** + * Look for evidence of non-Cygwin paths before we bother. + * This is only for when using the Unix files. + */ +! if (strpbrk(p, "\\:") != NULL) + { + char posix_path[PATH_MAX]; + +--- 2262,2268 ---- + * Look for evidence of non-Cygwin paths before we bother. + * This is only for when using the Unix files. + */ +! if (strpbrk(p, "\\:") != NULL && !path_with_url(p)) + { + char posix_path[PATH_MAX]; + +*** ../vim-7.2.414/src/version.c 2010-05-07 16:18:08.000000000 +0200 +--- src/version.c 2010-05-07 16:34:22.000000000 +0200 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 415, + /**/ + +-- +How To Keep A Healthy Level Of Insanity: +6. In the memo field of all your checks, write "for sexual favors". + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/patches/7.2.416 b/source/ap/vim/patches/7.2.416 new file mode 100644 index 000000000..67bb80808 --- /dev/null +++ b/source/ap/vim/patches/7.2.416 @@ -0,0 +1,69 @@ +To: vim-dev@vim.org +Subject: Patch 7.2.416 +Fcc: outbox +From: Bram Moolenaar <Bram@moolenaar.net> +Mime-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit +------------ + +Patch 7.2.416 +Problem: Logtalk.dict is not installed. +Solution: Add it to the install target. (Markus Heidelberg) +Files: src/Makefile + + +*** ../vim-7.2.415/src/Makefile 2010-05-07 16:35:12.000000000 +0200 +--- src/Makefile 2010-04-06 20:19:48.000000000 +0200 +*************** +*** 30,36 **** + # want to disable using X11 libraries. This speeds up starting Vim, + # but the window title will not be set and the X11 selection can not + # used. +! # - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the + # X11 Session Management Protocol (XSMP) library (libSM) but do not + # want to use it. + # This can speedup Vim startup but Vim loses the ability to catch the +--- 30,36 ---- + # want to disable using X11 libraries. This speeds up starting Vim, + # but the window title will not be set and the X11 selection can not + # used. +! # - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the + # X11 Session Management Protocol (XSMP) library (libSM) but do not + # want to use it. + # This can speedup Vim startup but Vim loses the ability to catch the +*************** +*** 1882,1888 **** + cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) + cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt + # install the ftplugin files +! cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP) + cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt + # install the compiler files + cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) +--- 1882,1888 ---- + cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) + cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt + # install the ftplugin files +! cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) + cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt + # install the compiler files + cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) +*** ../vim-7.2.415/src/version.c 2010-05-07 16:34:59.000000000 +0200 +--- src/version.c 2010-05-07 16:53:17.000000000 +0200 +*************** +*** 683,684 **** +--- 683,686 ---- + { /* Add new patch number below this line */ ++ /**/ ++ 416, + /**/ + +-- +How To Keep A Healthy Level Of Insanity: +8. Don't use any punctuation marks. + + /// Bram Moolenaar -- Bram@Moolenaar.net -- http://www.Moolenaar.net \\\ +/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\ +\\\ download, build and distribute -- http://www.A-A-P.org /// + \\\ help me help AIDS victims -- http://ICCF-Holland.org /// diff --git a/source/ap/vim/vim-gvim.SlackBuild b/source/ap/vim/vim-gvim.SlackBuild index 8c24b51d9..31ceb1de2 100755 --- a/source/ap/vim/vim-gvim.SlackBuild +++ b/source/ap/vim/vim-gvim.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,10 +24,20 @@ VIMVER=7.2 # This is the directory in the VIM source archive to cd into. DIRVER=72 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + PYVER=$(python -V 2>&1 | cut -f 2 -d' ' | cut -f 1-2 -d.) if [ "$ARCH" = "x86_64" ]; then @@ -82,6 +92,21 @@ CFLAGS="$SLKCFLAGS" LDFLAGS="$SLKLDFLAGS" \ } cd $TMP/vim$DIRVER + +# If there's no syntax update, create one: +if ! ls $CWD/vim-runtime-syntax-* 1> /dev/null 2> /dev/null ; then + rm -rf runtime/syntax.orig + cp -a runtime/syntax runtime/syntax.orig + echo "Fetching vim syntax updates from ftp.nluug.nl..." + rsync -avzcP ftp.nluug.nl::Vim/runtime/syntax/ runtime/syntax/ + diff -u -r --new-file runtime/syntax.orig runtime/syntax | gzip -9c > $CWD/vim-runtime-syntax-$(date +%Y%m%d).diff.gz + rm -rf runtime/syntax + mv runtime/syntax.orig runtime/syntax +fi + +# Apply the syntax update: +zcat $CWD/vim-runtime-syntax-*.diff.gz | patch -p0 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/ap/vim/vim-runtime-syntax-20100510.diff b/source/ap/vim/vim-runtime-syntax-20100510.diff new file mode 100644 index 000000000..f8d901d7a --- /dev/null +++ b/source/ap/vim/vim-runtime-syntax-20100510.diff @@ -0,0 +1,7471 @@ +diff -u -r --new-file runtime/syntax.orig/2html.vim runtime/syntax/2html.vim +--- runtime/syntax.orig/2html.vim 2008-07-17 16:03:05.000000000 -0500 ++++ runtime/syntax/2html.vim 2009-07-26 06:44:10.000000000 -0500 +@@ -1,13 +1,18 @@ + " Vim syntax support file + " Maintainer: Bram Moolenaar <Bram@vim.org> +-" Last Change: 2008 Jul 17 ++" Last Change: 2009 Jul 14 + " (modified by David Ne\v{c}as (Yeti) <yeti@physics.muni.cz>) + " (XHTML support by Panagiotis Issaris <takis@lumumba.luc.ac.be>) + " (made w3 compliant by Edd Barrett <vext01@gmail.com>) + " (added html_font. Edd Barrett <vext01@gmail.com>) ++" (dynamic folding by Ben Fritz <fritzophrenic@gmail.com>) + + " Transform a file into HTML, using the current syntax highlighting. + ++" this file uses line continuations ++let s:cpo_sav = &cpo ++set cpo-=C ++ + " Number lines when explicitely requested or when `number' is set + if exists("html_number_lines") + let s:numblines = html_number_lines +@@ -22,6 +27,37 @@ + let s:htmlfont = "monospace" + endif + ++" make copies of the user-defined settings that we may overrule ++if exists("html_dynamic_folds") ++ let s:html_dynamic_folds = 1 ++endif ++if exists("html_hover_unfold") ++ let s:html_hover_unfold = 1 ++endif ++if exists("html_use_css") ++ let s:html_use_css = 1 ++endif ++ ++" hover opening implies dynamic folding ++if exists("s:html_hover_unfold") ++ let s:html_dynamic_folds = 1 ++endif ++ ++" dynamic folding with no foldcolumn implies hover opens ++if exists("s:html_dynamic_folds") && exists("html_no_foldcolumn") ++ let s:html_hover_unfold = 1 ++endif ++ ++" ignore folding overrides dynamic folding ++if exists("html_ignore_folding") && exists("s:html_dynamic_folds") ++ unlet s:html_dynamic_folds ++endif ++ ++" dynamic folding implies css ++if exists("s:html_dynamic_folds") ++ let s:html_use_css = 1 ++endif ++ + " When not in gui we can only guess the colors. + if has("gui_running") + let s:whatterm = "gui" +@@ -62,7 +98,7 @@ + endfun + endif + +-if !exists("html_use_css") ++if !exists("s:html_use_css") + " Return opening HTML tag for given highlight id + function! s:HtmlOpening(id) + let a = "" +@@ -150,6 +186,26 @@ + return a + endfun + ++if exists("s:html_dynamic_folds") ++ ++ " compares two folds as stored in our list of folds ++ " A fold is "less" than another if it starts at an earlier line number, ++ " or ends at a later line number, ties broken by fold level ++ function! s:FoldCompare(f1, f2) ++ if a:f1.firstline != a:f2.firstline ++ " put it before if it starts earlier ++ return a:f1.firstline - a:f2.firstline ++ elseif a:f1.lastline != a:f2.lastline ++ " put it before if it ends later ++ return a:f2.lastline - a:f1.lastline ++ else ++ " if folds begin and end on the same lines, put lowest fold level first ++ return a:f1.level - a:f2.level ++ endif ++ endfunction ++ ++endif ++ + " Figure out proper MIME charset from the 'encoding' option. + if exists("html_use_encoding") + let s:html_encoding = html_use_encoding +@@ -223,13 +279,13 @@ + let s:tag_close = '>' + endif + +-" Cache html_no_pre incase we have to turn it on for non-css mode ++" Cache html_no_pre in case we have to turn it on for non-css mode + if exists("html_no_pre") + let s:old_html_no_pre = html_no_pre + endif + +-if !exists("html_use_css") +- " Cant put font tags in <pre> ++if !exists("s:html_use_css") ++ " Can't put font tags in <pre> + let html_no_pre=1 + endif + +@@ -251,9 +307,86 @@ + exe "normal! a<meta http-equiv=\"content-type\" content=\"text/html; charset=" . s:html_encoding . '"' . s:tag_close . "\n\e" + endif + +-if exists("html_use_css") +- exe "normal! a<style type=\"text/css\">\n<!--\n-->\n</style>\n\e" ++if exists("s:html_use_css") ++ if exists("s:html_dynamic_folds") ++ if exists("s:html_hover_unfold") ++ " if we are doing hover_unfold, use css 2 with css 1 fallback for IE6 ++ exe "normal! a". ++ \ "<style type=\"text/css\">\n<!--\n". ++ \ ".FoldColumn { text-decoration: none; white-space: pre; }\n\n". ++ \ "body * { margin: 0; padding: 0; }\n". ++ \ "\n". ++ \ ".open-fold > .Folded { display: none; }\n". ++ \ ".open-fold > .fulltext { display: inline; }\n". ++ \ ".closed-fold > .fulltext { display: none; }\n". ++ \ ".closed-fold > .Folded { display: inline; }\n". ++ \ "\n". ++ \ ".open-fold > .toggle-open { display: none; }\n". ++ \ ".open-fold > .toggle-closed { display: inline; }\n". ++ \ ".closed-fold > .toggle-open { display: inline; }\n". ++ \ ".closed-fold > .toggle-closed { display: none; }\n" ++ exe "normal! a\n/* opening a fold while hovering won't be supported by IE6 and other\n". ++ \ "similar browsers, but it should fail gracefully. */\n". ++ \ ".closed-fold:hover > .fulltext { display: inline; }\n". ++ \ ".closed-fold:hover > .toggle-filler { display: none; }\n". ++ \ ".closed-fold:hover > .Folded { display: none; }\n" ++ exe "normal! a-->\n</style>\n" ++ exe "normal! a<!--[if lt IE 7]>". ++ \ "<style type=\"text/css\">\n". ++ \ ".open-fold .Folded { display: none; }\n". ++ \ ".open-fold .fulltext { display: inline; }\n". ++ \ ".open-fold .toggle-open { display: none; }\n". ++ \ ".closed-fold .toggle-closed { display: inline; }\n". ++ \ "\n". ++ \ ".closed-fold .fulltext { display: none; }\n". ++ \ ".closed-fold .Folded { display: inline; }\n". ++ \ ".closed-fold .toggle-open { display: inline; }\n". ++ \ ".closed-fold .toggle-closed { display: none; }\n". ++ \ "</style>\n". ++ \ "<![endif]-->\n" ++ else ++ " if we aren't doing hover_unfold, use CSS 1 only ++ exe "normal! a<style type=\"text/css\">\n<!--\n". ++ \ ".FoldColumn { text-decoration: none; white-space: pre; }\n\n". ++ \ ".open-fold .Folded { display: none; }\n". ++ \ ".open-fold .fulltext { display: inline; }\n". ++ \ ".open-fold .toggle-open { display: none; }\n". ++ \ ".closed-fold .toggle-closed { display: inline; }\n". ++ \ "\n". ++ \ ".closed-fold .fulltext { display: none; }\n". ++ \ ".closed-fold .Folded { display: inline; }\n". ++ \ ".closed-fold .toggle-open { display: inline; }\n". ++ \ ".closed-fold .toggle-closed { display: none; }\n". ++ \ "-->\n</style>\n" ++ endif ++ else ++ " if we aren't doing any dynamic folding, no need for any special rules ++ exe "normal! a<style type=\"text/css\">\n<!--\n-->\n</style>\n\e" ++ endif ++endif ++ ++" insert javascript to toggle folds open and closed ++if exists("s:html_dynamic_folds") ++ exe "normal! a\n". ++ \ "<script type='text/javascript'>\n". ++ \ "<!--\n". ++ \ "function toggleFold(objID)\n". ++ \ "{\n". ++ \ " var fold;\n". ++ \ " fold = document.getElementById(objID);\n". ++ \ " if(fold.className == 'closed-fold')\n". ++ \ " {\n". ++ \ " fold.className = 'open-fold';\n". ++ \ " }\n". ++ \ " else if (fold.className == 'open-fold')\n". ++ \ " {\n". ++ \ " fold.className = 'closed-fold';\n". ++ \ " }\n". ++ \ "}\n". ++ \ "-->\n". ++ \ "</script>\n\e" + endif ++ + if exists("html_no_pre") + exe "normal! a</head>\n<body>\n\e" + else +@@ -265,7 +398,81 @@ + " List of all id's + let s:idlist = "," + +-" Loop over all lines in the original text. ++" First do some preprocessing for dynamic folding. Do this for the entire file ++" so we don't accidentally start within a closed fold or something. ++let s:allfolds = [] ++ ++if exists("s:html_dynamic_folds") ++ let s:lnum = 1 ++ let s:end = line('$') ++ " save the fold text and set it to the default so we can find fold levels ++ let s:foldtext_save = &foldtext ++ set foldtext& ++ ++ " we will set the foldcolumn in the html to the greater of the maximum fold ++ " level and the current foldcolumn setting ++ let s:foldcolumn = &foldcolumn ++ ++ " get all info needed to describe currently closed folds ++ while s:lnum < s:end ++ if foldclosed(s:lnum) == s:lnum ++ " default fold text has '+-' and then a number of dashes equal to fold ++ " level, so subtract 2 from index of first non-dash after the dashes ++ " in order to get the fold level of the current fold ++ let s:level = match(foldtextresult(s:lnum), '+-*\zs[^-]') - 2 ++ if s:level+1 > s:foldcolumn ++ let s:foldcolumn = s:level+1 ++ endif ++ " store fold info for later use ++ let s:newfold = {'firstline': s:lnum, 'lastline': foldclosedend(s:lnum), 'level': s:level,'type': "closed-fold"} ++ call add(s:allfolds, s:newfold) ++ " open the fold so we can find any contained folds ++ execute s:lnum."foldopen" ++ else ++ let s:lnum = s:lnum + 1 ++ endif ++ endwhile ++ ++ " close all folds to get info for originally open folds ++ silent! %foldclose! ++ let s:lnum = 1 ++ ++ " the originally open folds will be all folds we encounter that aren't ++ " already in the list of closed folds ++ while s:lnum < s:end ++ if foldclosed(s:lnum) == s:lnum ++ " default fold text has '+-' and then a number of dashes equal to fold ++ " level, so subtract 2 from index of first non-dash after the dashes ++ " in order to get the fold level of the current fold ++ let s:level = match(foldtextresult(s:lnum), '+-*\zs[^-]') - 2 ++ if s:level+1 > s:foldcolumn ++ let s:foldcolumn = s:level+1 ++ endif ++ let s:newfold = {'firstline': s:lnum, 'lastline': foldclosedend(s:lnum), 'level': s:level,'type': "closed-fold"} ++ " only add the fold if we don't already have it ++ if empty(s:allfolds) || index(s:allfolds, s:newfold) == -1 ++ let s:newfold.type = "open-fold" ++ call add(s:allfolds, s:newfold) ++ endif ++ " open the fold so we can find any contained folds ++ execute s:lnum."foldopen" ++ else ++ let s:lnum = s:lnum + 1 ++ endif ++ endwhile ++ ++ " sort the folds so that we only ever need to look at the first item in the ++ " list of folds ++ call sort(s:allfolds, "s:FoldCompare") ++ ++ let &foldtext = s:foldtext_save ++ unlet s:foldtext_save ++ ++ " close all folds again so we can get the fold text as we go ++ silent! %foldclose! ++endif ++ ++" Now loop over all lines in the original text to convert to html. + " Use html_start_line and html_end_line if they are set. + if exists("html_start_line") + let s:lnum = html_start_line +@@ -284,6 +491,15 @@ + let s:end = line("$") + endif + ++" stack to keep track of all the folds containing the current line ++let s:foldstack = [] ++ ++if s:numblines ++ let s:margin = strlen(s:end) + 1 ++else ++ let s:margin = 0 ++endif ++ + if has('folding') && !exists('html_ignore_folding') + let s:foldfillchar = &fillchars[matchend(&fillchars, 'fold:')] + if s:foldfillchar == '' +@@ -295,6 +511,7 @@ + let s:difffillchar = '-' + endif + ++let s:foldId = 0 + + while s:lnum <= s:end + +@@ -303,12 +520,7 @@ + if s:filler > 0 + let s:n = s:filler + while s:n > 0 +- if s:numblines +- " Indent if line numbering is on +- let s:new = repeat(s:LeadingSpace, strlen(s:end) + 1) . repeat(s:difffillchar, 3) +- else +- let s:new = repeat(s:difffillchar, 3) +- endif ++ let s:new = repeat(s:difffillchar, 3) + + if s:n > 2 && s:n < s:filler && !exists("html_whole_filler") + let s:new = s:new . " " . s:filler . " inserted lines " +@@ -317,10 +529,16 @@ + + if !exists("html_no_pre") + " HTML line wrapping is off--go ahead and fill to the margin +- let s:new = s:new . repeat(s:difffillchar, &columns - strlen(s:new)) ++ let s:new = s:new . repeat(s:difffillchar, &columns - strlen(s:new) - s:margin) ++ else ++ let s:new = s:new . repeat(s:difffillchar, 3) + endif + + let s:new = s:HtmlFormat(s:new, "DiffDelete") ++ if s:numblines ++ " Indent if line numbering is on; must be after escaping. ++ let s:new = repeat(s:LeadingSpace, s:margin) . s:new ++ endif + exe s:newwin . "wincmd w" + exe "normal! a" . s:new . s:HtmlEndline . "\n\e" + exe s:orgwin . "wincmd w" +@@ -333,16 +551,18 @@ + + " Start the line with the line number. + if s:numblines +- let s:new = repeat(' ', strlen(s:end) - strlen(s:lnum)) . s:lnum . ' ' ++ let s:numcol = repeat(' ', s:margin - 1 - strlen(s:lnum)) . s:lnum . ' ' + else +- let s:new = "" ++ let s:numcol = "" + endif + +- if has('folding') && !exists('html_ignore_folding') && foldclosed(s:lnum) > -1 ++ let s:new = "" ++ ++ if has('folding') && !exists('html_ignore_folding') && foldclosed(s:lnum) > -1 && !exists('s:html_dynamic_folds') + " +- " This is the beginning of a folded block ++ " This is the beginning of a folded block (with no dynamic folding) + " +- let s:new = s:new . foldtextresult(s:lnum) ++ let s:new = s:numcol . foldtextresult(s:lnum) + if !exists("html_no_pre") + " HTML line wrapping is off--go ahead and fill to the margin + let s:new = s:new . repeat(s:foldfillchar, &columns - strlen(s:new)) +@@ -355,14 +575,96 @@ + + else + " +- " A line that is not folded. ++ " A line that is not folded, or doing dynamic folding. + " + let s:line = getline(s:lnum) +- + let s:len = strlen(s:line) + ++ if exists("s:html_dynamic_folds") ++ " First insert a closing for any open folds that end on this line ++ while !empty(s:foldstack) && get(s:foldstack,0).lastline == s:lnum-1 ++ let s:new = s:new."</span></span>" ++ call remove(s:foldstack, 0) ++ endwhile ++ ++ " Now insert an opening any new folds that start on this line ++ let s:firstfold = 1 ++ while !empty(s:allfolds) && get(s:allfolds,0).firstline == s:lnum ++ let s:foldId = s:foldId + 1 ++ let s:new = s:new . "<span id='fold".s:foldId."' class='".s:allfolds[0].type."'>" ++ ++ " Unless disabled, add a fold column for the opening line of a fold. ++ " ++ " Note that dynamic folds require using css so we just use css to take ++ " care of the leading spaces rather than using in the case of ++ " html_no_pre to make it easier ++ if !exists("html_no_foldcolumn") ++ " add fold column that can open the new fold ++ if s:allfolds[0].level > 1 && s:firstfold ++ let s:new = s:new . "<a class='toggle-open FoldColumn' href='javascript:toggleFold(\"fold".s:foldstack[0].id."\")'>" ++ let s:new = s:new . repeat('|', s:allfolds[0].level - 1) . "</a>" ++ endif ++ let s:new = s:new . "<a class='toggle-open FoldColumn' href='javascript:toggleFold(\"fold".s:foldId."\")'>+</a>" ++ let s:new = s:new . "<a class='toggle-open " ++ " If this is not the last fold we're opening on this line, we need ++ " to keep the filler spaces hidden if the fold is opened by mouse ++ " hover. If it is the last fold to open in the line, we shouldn't hide ++ " them, so don't apply the toggle-filler class. ++ if get(s:allfolds, 1, {'firstline': 0}).firstline == s:lnum ++ let s:new = s:new . "toggle-filler " ++ endif ++ let s:new = s:new . "FoldColumn' href='javascript:toggleFold(\"fold".s:foldId."\")'>" ++ let s:new = s:new . repeat(" ", s:foldcolumn - s:allfolds[0].level) . "</a>" ++ ++ " add fold column that can close the new fold ++ let s:new = s:new . "<a class='toggle-closed FoldColumn' href='javascript:toggleFold(\"fold".s:foldId."\")'>" ++ if s:firstfold ++ let s:new = s:new . repeat('|', s:allfolds[0].level - 1) ++ endif ++ let s:new = s:new . "-" ++ " only add spaces if we aren't opening another fold on the same line ++ if get(s:allfolds, 1, {'firstline': 0}).firstline != s:lnum ++ let s:new = s:new . repeat(" ", s:foldcolumn - s:allfolds[0].level) ++ endif ++ let s:new = s:new . "</a>" ++ let s:firstfold = 0 ++ endif ++ ++ " add fold text, moving the span ending to the next line so collapsing ++ " of folds works correctly ++ let s:new = s:new . substitute(s:HtmlFormat(s:numcol . foldtextresult(s:lnum), "Folded"), '</span>', s:HtmlEndline.'\r\0', '') ++ let s:new = s:new . "<span class='fulltext'>" ++ ++ " open the fold now that we have the fold text to allow retrieval of ++ " fold text for subsequent folds ++ execute s:lnum."foldopen" ++ call insert(s:foldstack, remove(s:allfolds,0)) ++ let s:foldstack[0].id = s:foldId ++ endwhile ++ ++ " Unless disabled, add a fold column for other lines. ++ " ++ " Note that dynamic folds require using css so we just use css to take ++ " care of the leading spaces rather than using in the case of ++ " html_no_pre to make it easier ++ if !exists("html_no_foldcolumn") ++ if empty(s:foldstack) ++ " add the empty foldcolumn for unfolded lines ++ let s:new = s:new . s:HtmlFormat(repeat(' ', s:foldcolumn), "FoldColumn") ++ else ++ " add the fold column for folds not on the opening line ++ if get(s:foldstack, 0).firstline < s:lnum ++ let s:new = s:new . "<a class='FoldColumn' href='javascript:toggleFold(\"fold".s:foldstack[0].id."\")'>" ++ let s:new = s:new . repeat('|', s:foldstack[0].level) ++ let s:new = s:new . repeat(' ', s:foldcolumn - s:foldstack[0].level) . "</a>" ++ endif ++ endif ++ endif ++ endif ++ ++ " Now continue with the unfolded line text + if s:numblines +- let s:new = s:HtmlFormat(s:new, "lnr") ++ let s:new = s:new . s:HtmlFormat(s:numcol, "lnr") + endif + + " Get the diff attribute, if any. +@@ -380,7 +682,7 @@ + while s:col <= s:len && s:id == diff_hlID(s:lnum, s:col) | let s:col = s:col + 1 | endwhile + if s:len < &columns && !exists("html_no_pre") + " Add spaces at the end to mark the changed line. +- let s:line = s:line . repeat(' ', &columns - s:len) ++ let s:line = s:line . repeat(' ', &columns - virtcol([s:lnum, s:len]) - s:margin) + let s:len = &columns + endif + else +@@ -393,11 +695,27 @@ + + " Expand tabs + let s:expandedtab = strpart(s:line, s:startcol - 1, s:col - s:startcol) +- let idx = stridx(s:expandedtab, "\t") +- while idx >= 0 +- let i = &ts - ((idx + s:startcol - 1) % &ts) +- let s:expandedtab = substitute(s:expandedtab, '\t', repeat(' ', i), '') +- let idx = stridx(s:expandedtab, "\t") ++ let s:offset = 0 ++ let s:idx = stridx(s:expandedtab, "\t") ++ while s:idx >= 0 ++ if has("multi_byte_encoding") ++ if s:startcol + s:idx == 1 ++ let s:i = &ts ++ else ++ if s:idx == 0 ++ let s:prevc = matchstr(s:line, '.\%' . (s:startcol + s:idx + s:offset) . 'c') ++ else ++ let s:prevc = matchstr(s:expandedtab, '.\%' . (s:idx + 1) . 'c') ++ endif ++ let s:vcol = virtcol([s:lnum, s:startcol + s:idx + s:offset - len(s:prevc)]) ++ let s:i = &ts - (s:vcol % &ts) ++ endif ++ let s:offset -= s:i - 1 ++ else ++ let s:i = &ts - ((s:idx + s:startcol - 1) % &ts) ++ endif ++ let s:expandedtab = substitute(s:expandedtab, '\t', repeat(' ', s:i), '') ++ let s:idx = stridx(s:expandedtab, "\t") + endwhile + + " Output the text with the same synID, with class set to {s:id_name} +@@ -415,8 +733,22 @@ + " Finish with the last line + exe s:newwin . "wincmd w" + ++if exists("s:html_dynamic_folds") ++ " finish off any open folds ++ while !empty(s:foldstack) ++ exe "normal! a</span></span>" ++ call remove(s:foldstack, 0) ++ endwhile ++ ++ " add fold column to the style list if not already there ++ let s:id = hlID('FoldColumn') ++ if stridx(s:idlist, "," . s:id . ",") == -1 ++ let s:idlist = s:idlist . s:id . "," ++ endif ++endif ++ + " Close off the font tag that encapsulates the whole <body> +-if !exists("html_use_css") ++if !exists("s:html_use_css") + exe "normal! a</font>\e" + endif + +@@ -428,7 +760,7 @@ + + + " Now, when we finally know which, we define the colors and styles +-if exists("html_use_css") ++if exists("s:html_use_css") + 1;/<style type="text/+1 + endif + +@@ -445,7 +777,7 @@ + " Normal/global attributes + " For Netscape 4, set <body> attributes too, though, strictly speaking, it's + " incorrect. +-if exists("html_use_css") ++if exists("s:html_use_css") + if exists("html_no_pre") + execute "normal! A\nbody { color: " . s:fgc . "; background-color: " . s:bgc . "; font-family: ". s:htmlfont ."; }\e" + else +@@ -455,12 +787,12 @@ + execute "normal! ^cwbody\e" + endif + else +- execute '%s:<body>:<body bgcolor="' . s:bgc . '" text="' . s:fgc . '"><font face="'. s:htmlfont .'">' ++ execute '%s:<body>:<body bgcolor="' . s:bgc . '" text="' . s:fgc . '"><font face="'. s:htmlfont .'">' + endif + + " Line numbering attributes + if s:numblines +- if exists("html_use_css") ++ if exists("s:html_use_css") + execute "normal! A\n.lnr { " . s:CSS1(hlID("LineNr")) . "}\e" + else + execute '%s+^<span class="lnr">\([^<]*\)</span>+' . s:HtmlOpening(hlID("LineNr")) . '\1' . s:HtmlClosing(hlID("LineNr")) . '+g' +@@ -479,14 +811,14 @@ + " If the class has some attributes, export the style, otherwise DELETE all + " its occurences to make the HTML shorter + if s:attr != "" +- if exists("html_use_css") ++ if exists("s:html_use_css") + execute "normal! A\n." . s:id_name . " { " . s:attr . "}" + else + execute '%s+<span class="' . s:id_name . '">\([^<]*\)</span>+' . s:HtmlOpening(s:id) . '\1' . s:HtmlClosing(s:id) . '+g' + endif + else + execute '%s+<span class="' . s:id_name . '">\([^<]*\)</span>+\1+ge' +- if exists("html_use_css") ++ if exists("s:html_use_css") + 1;/<style type="text/+1 + endif + endif +@@ -531,16 +863,28 @@ + " Save a little bit of memory (worth doing?) + unlet s:htmlfont + unlet s:old_et s:old_paste s:old_icon s:old_report s:old_title s:old_search +-unlet s:whatterm s:idlist s:lnum s:end s:fgc s:bgc s:old_magic ++unlet s:whatterm s:idlist s:lnum s:end s:margin s:fgc s:bgc s:old_magic + unlet! s:col s:id s:attr s:len s:line s:new s:expandedtab s:numblines +-unlet s:orgwin s:newwin s:orgbufnr ++unlet! s:orgwin s:newwin s:orgbufnr s:idx s:i s:offset + if !v:profiling + delfunc s:HtmlColor + delfunc s:HtmlFormat + delfunc s:CSS1 +- if !exists("html_use_css") ++ if !exists("s:html_use_css") + delfunc s:HtmlOpening + delfunc s:HtmlClosing + endif + endif +-silent! unlet s:diffattr s:difffillchar s:foldfillchar s:HtmlSpace s:LeadingSpace s:HtmlEndline ++silent! unlet s:diffattr s:difffillchar s:foldfillchar s:HtmlSpace s:LeadingSpace s:HtmlEndline s:firstfold s:foldcolumn ++unlet s:foldstack s:allfolds s:foldId s:numcol ++ ++if exists("s:html_dynamic_folds") ++ delfunc s:FoldCompare ++endif ++ ++silent! unlet s:html_dynamic_folds s:html_hover_unfold s:html_use_css ++ ++let &cpo = s:cpo_sav ++unlet s:cpo_sav ++ ++" vim: noet sw=2 sts=2 +diff -u -r --new-file runtime/syntax.orig/asm.vim runtime/syntax/asm.vim +--- runtime/syntax.orig/asm.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/asm.vim 2010-01-12 14:45:24.000000000 -0600 +@@ -1,10 +1,12 @@ + " Vim syntax file + " Language: GNU Assembler +-" Maintainer: Kevin Dahlhausen <kdahlhaus@yahoo.com> +-" Last Change: 2002 Sep 19 ++" Maintainer: Erik Wognsen <erik.wognsen@gmail.com> ++" Previous maintainer: ++" Kevin Dahlhausen <kdahlhaus@yahoo.com> ++" Last Change: 2010 Jan 9 + + " For version 5.x: Clear all syntax items +-" For version 6.x: Quit when a syntax file was already loaded ++" For version 6.0 and later: Quit when a syntax file was already loaded + if version < 600 + syntax clear + elseif exists("b:current_syntax") +@@ -13,7 +15,6 @@ + + syn case ignore + +- + " storage types + syn match asmType "\.long" + syn match asmType "\.ascii" +@@ -44,9 +45,8 @@ + syn match hexNumber "0[xX][0-9a-fA-F]\+" + syn match binNumber "0[bB][0-1]*" + +- +-syn match asmSpecialComment ";\*\*\*.*" +-syn match asmComment ";.*"hs=s+1 ++syn match asmComment "#.*" ++syn region asmComment start="/\*" end="\*/" + + syn match asmInclude "\.include" + syn match asmCond "\.if" +@@ -86,15 +86,9 @@ + HiLink octNumber Number + HiLink binNumber Number + +- HiLink asmSpecialComment Comment + HiLink asmIdentifier Identifier + HiLink asmType Type + +- " My default color overrides: +- " hi asmSpecialComment ctermfg=red +- " hi asmIdentifier ctermfg=lightcyan +- " hi asmType ctermbg=black ctermfg=brown +- + delcommand HiLink + endif + +diff -u -r --new-file runtime/syntax.orig/bzr.vim runtime/syntax/bzr.vim +--- runtime/syntax.orig/bzr.vim 2008-07-30 14:47:17.000000000 -0500 ++++ runtime/syntax/bzr.vim 2009-01-28 10:23:50.000000000 -0600 +@@ -2,9 +2,14 @@ + " Language: Bazaar (bzr) commit file + " Maintainer: Dmitry Vasiliev <dima at hlabs dot spb dot ru> + " URL: http://www.hlabs.spb.ru/vim/bzr.vim +-" Revision: $Id: bzr.vim 683 2008-07-30 11:52:38Z hdima $ ++" Last Change: 2009-01-27 + " Filenames: bzr_log.* +-" Version: 1.1 ++" Version: 1.2.1 ++" ++" Thanks: ++" ++" Gioele Barabucci ++" for idea of diff highlighting + + " For version 5.x: Clear all syntax items. + " For version 6.x: Quit when a syntax file was already loaded. +@@ -14,13 +19,21 @@ + finish + endif + +-syn region bzrRegion start="^-\{14} This line and the following will be ignored -\{14}$" end="\%$" contains=ALL contains=@NoSpell ++if exists("bzr_highlight_diff") ++ syn include @Diff syntax/diff.vim ++endif ++ + syn match bzrRemoved "^removed:$" contained + syn match bzrAdded "^added:$" contained + syn match bzrRenamed "^renamed:$" contained + syn match bzrModified "^modified:$" contained + syn match bzrUnchanged "^unchanged:$" contained + syn match bzrUnknown "^unknown:$" contained ++syn cluster Statuses contains=bzrRemoved,bzrAdded,bzrRenamed,bzrModified,bzrUnchanged,bzrUnknown ++if exists("bzr_highlight_diff") ++ syn cluster Statuses add=@Diff ++endif ++syn region bzrRegion start="^-\{14} This line and the following will be ignored -\{14}$" end="\%$" contains=@NoSpell,@Statuses + + " Synchronization. + syn sync clear +@@ -37,7 +50,6 @@ + command -nargs=+ HiLink hi def link <args> + endif + +- HiLink bzrRegion Comment + HiLink bzrRemoved Constant + HiLink bzrAdded Identifier + HiLink bzrModified Special +diff -u -r --new-file runtime/syntax.orig/c.vim runtime/syntax/c.vim +--- runtime/syntax.orig/c.vim 2008-03-19 15:44:52.000000000 -0500 ++++ runtime/syntax/c.vim 2009-11-28 06:31:38.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: C + " Maintainer: Bram Moolenaar <Bram@vim.org> +-" Last Change: 2008 Mar 19 ++" Last Change: 2009 Nov 17 + + " Quit when a (custom) syntax file was already loaded + if exists("b:current_syntax") +@@ -16,8 +16,13 @@ + + syn keyword cTodo contained TODO FIXME XXX + ++" It's easy to accidentally add a space after a backslash that was intended ++" for line continuation. Some compilers allow it, which makes it ++" unpredicatable and should be avoided. ++syn match cBadContinuation contained "\\\s\+$" ++ + " cCommentGroup allows adding matches for special things in comments +-syn cluster cCommentGroup contains=cTodo ++syn cluster cCommentGroup contains=cTodo,cBadContinuation + + " String and Character constants + " Highlight special characters (those which have a backslash) differently +@@ -265,7 +270,7 @@ + endif + + " Accept %: for # (C99) +-syn region cPreCondit start="^\s*\(%:\|#\)\s*\(if\|ifdef\|ifndef\|elif\)\>" skip="\\$" end="$" end="//"me=s-1 contains=cComment,cCppString,cCharacter,cCppParen,cParenError,cNumbers,cCommentError,cSpaceError ++syn region cPreCondit start="^\s*\(%:\|#\)\s*\(if\|ifdef\|ifndef\|elif\)\>" skip="\\$" end="$" contains=cComment,cCommentL,cCppString,cCharacter,cCppParen,cParenError,cNumbers,cCommentError,cSpaceError + syn match cPreCondit display "^\s*\(%:\|#\)\s*\(else\|endif\)\>" + if !exists("c_no_if0") + if !exists("c_no_if0_fold") +@@ -281,7 +286,7 @@ + syn match cInclude display "^\s*\(%:\|#\)\s*include\>\s*["<]" contains=cIncluded + "syn match cLineSkip "\\$" + syn cluster cPreProcGroup contains=cPreCondit,cIncluded,cInclude,cDefine,cErrInParen,cErrInBracket,cUserLabel,cSpecial,cOctalZero,cCppOut,cCppOut2,cCppSkip,cFormat,cNumber,cFloat,cOctal,cOctalError,cNumbersCom,cString,cCommentSkip,cCommentString,cComment2String,@cCommentGroup,cCommentStartError,cParen,cBracket,cMulti +-syn region cDefine start="^\s*\(%:\|#\)\s*\(define\|undef\)\>" skip="\\$" end="$" end="//"me=s-1 keepend contains=ALLBUT,@cPreProcGroup,@Spell ++syn region cDefine start="^\s*\(%:\|#\)\s*\(define\|undef\)\>" skip="\\$" end="$" keepend contains=ALLBUT,@cPreProcGroup,@Spell + syn region cPreProc start="^\s*\(%:\|#\)\s*\(pragma\>\|line\>\|warning\>\|warn\>\|error\>\)" skip="\\$" end="$" keepend contains=ALLBUT,@cPreProcGroup,@Spell + + " Highlight User Labels +@@ -359,6 +364,7 @@ + hi def link cComment Comment + hi def link cSpecial SpecialChar + hi def link cTodo Todo ++hi def link cBadContinuation Error + hi def link cCppSkip cCppOut + hi def link cCppOut2 cCppOut + hi def link cCppOut Comment +diff -u -r --new-file runtime/syntax.orig/cf.vim runtime/syntax/cf.vim +--- runtime/syntax.orig/cf.vim 2007-11-19 16:27:33.000000000 -0600 ++++ runtime/syntax/cf.vim 2010-03-02 09:17:43.000000000 -0600 +@@ -1,321 +1,440 @@ + " Vim syntax file +-" Language: ColdFusion +-" Maintainer: Toby Woodwark (toby.woodwark+vim@gmail.com) +-" Last Change: 2007 Nov 19 +-" Filenames: *.cfc *.cfm +-" Version: Macromedia ColdFusion MX 7 +-" Usage: Note that ColdFusion has its own comment syntax +-" i.e. <!--- ---> +- +-" For version 5.x, clear all syntax items. +-" For version 6.x+, quit if a syntax file is already loaded. +-if version < 600 +- syntax clear +-elseif exists("b:current_syntax") ++" Language: CFML ++" Maintainer: Toby Woodwark (toby.woodwark+vim@gmail.com) ++" Last Change: 2010-03-02 ++" Filenames: *.cfc *.cfm ++" Version: Adobe ColdFusion 9 ++" Usage: This file contains both syntax definitions ++" and a list of known builtin tags, functions and keywords. ++" Refs - ++" http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WS8f0cc78011fffa71866534d11cdad96e4e-8000.html ++" http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec17324-8000.html ++" TODO: ++" Support the limited array literal and struct literal syntax in CF8+. ++" Highlight namespaced tags fom cfimport. ++" Complete CF9+ cfscript support. ++" Railo support. ++" Options: ++" d_noinclude_html - set to prevent HTML highlighting. Use this if you are not working on HTML. ++ ++" Quit if a syntax file is already loaded. ++if exists("b:current_syntax") + finish + endif + +-" Use all the stuff from the HTML syntax file. +-" TODO remove this; CFML is not a superset of HTML +-if version < 600 +- source <sfile>:p:h/html.vim ++if exists("d_noinclude_html") ++ " Define alternatives to the HTML syntax file. ++ ++ " Copied from html.vim - the rules for matching a CF tag match those for HTML/SGML. ++ " CFML syntax is more permissive when it comes to superfluous <> chars. ++ syn region htmlString contained start=+"+ end=+"+ contains=@htmlPreproc ++ syn region htmlString contained start=+'+ end=+'+ contains=@htmlPreproc ++ syn match htmlValue contained "=[\t ]*[^'" \t>][^ \t>]*"hs=s+1 contains=@htmlPreproc ++ " Hacked htmlTag so that it only matches cf tags and not random <> chars. ++ syn region htmlEndTag start=+</cf+ end=+>+ contains=htmlTagN,htmlTagError ++ syn region htmlTag start=+<\s*cf[^/]+ end=+>+ contains=htmlTagN,htmlString,htmlArg,htmlValue,htmlTagError,@htmlPreproc,@htmlArgCluster ++ syn match htmlTagN contained +<\s*[-a-zA-Z0-9]\++hs=s+1 contains=htmlTagName,@htmlTagNameCluster ++ syn match htmlTagN contained +</\s*[-a-zA-Z0-9]\++hs=s+2 contains=htmlTagName,@htmlTagNameCluster ++ syn match htmlTagError contained "[^>]<"ms=s+1 + else ++ " Use all the stuff from the HTML syntax file. ++ " This means eg HTML comments are highlighted as comments, even if they include cf tags. + runtime! syntax/html.vim + endif + +-syn sync fromstart +-syn sync maxlines=200 +-syn case ignore ++syn sync fromstart ++syn sync maxlines=200 ++syn case ignore + + " Scopes and keywords. +-syn keyword cfScope contained cgi cffile cookie request caller this thistag +-syn keyword cfScope contained cfcatch variables application server session client form url attributes +-syn keyword cfScope contained arguments +-syn keyword cfBool contained yes no true false ++syn keyword cfScope contained cgi cffile cookie request caller this thistag ++syn keyword cfScope contained cfcatch variables application server session client form url local ++syn keyword cfScope contained arguments super cfhttp attributes error ++syn keyword cfBool contained yes no true false + + " Operator strings. +-syn keyword cfOperator contained xor eqv and or lt le lte gt ge gte equal eq neq not is mod contains +-syn match cfOperatorMatch contained "\<does\_s\+not\_s\+contain\>" +-syn match cfOperatorMatch contained "\<\(greater\|less\)\_s\+than\(\_s\+or\_s\+equal\_s\+to\)\?\>" +-syn match cfOperatorMatch contained "[\+\-\*\/\\\^\&][\+\-\*\/\\\^\&]\@!" +-syn cluster cfOperatorCluster contains=cfOperator,cfOperatorMatch ++" ColdFusion <=7: ++syn keyword cfOperator contained xor eqv and or lt le lte gt ge gte equal eq neq not is mod contains ++syn match cfOperatorMatch contained "+" ++syn match cfOperatorMatch contained "\-" ++syn match cfOperatorMatch contained "[\*\/\\\^\&][\+\-\*\/\\\^\&]\@!" ++syn match cfOperatorMatch contained "\<\(not\_s\+\)\?equal\>" ++syn match cfOperatorMatch contained "\<does\_s\+not\_s\+contain\>" ++syn match cfOperatorMatch contained "\<\(greater\|less\)\_s\+than\(\_s\+or\_s\+equal\_s\+to\)\?\>" ++" ColdFusion 8: ++syn keyword cfOperator contained imp ++syn match cfOperatorMatch contained "[?%:!]" ++syn match cfOperatorMatch contained "[\+\-\*\/\&]=" ++syn match cfOperatorMatch contained "++" ++syn match cfOperatorMatch contained "--" ++syn match cfOperatorMatch contained "&&" ++syn match cfOperatorMatch contained "||" ++ ++syn cluster cfOperatorCluster contains=cfOperator,cfOperatorMatch ++ ++" Custom tags called with the <cf_xxx> syntax. ++syn match cfCustomTagName contained "\<cf_[a-zA-Z0-9_]\+\>" ++" (TODO match namespaced tags imported using cfimport, similarly.) + + " Tag names. +-syn keyword cfTagName contained cfabort cfapplet cfapplication cfargument cfassociate +-syn keyword cfTagName contained cfbreak cfcache cfcalendar cfcase cfcatch +-syn keyword cfTagName contained cfchart cfchartdata cfchartseries cfcol cfcollection +-syn keyword cfTagName contained cfcomponent cfcontent cfcookie cfdefaultcase cfdirectory +-syn keyword cfTagName contained cfdocument cfdocumentitem cfdocumentsection cfdump cfelse +-syn keyword cfTagName contained cfelseif cferror cfexecute cfexit cffile cfflush cfform +-syn keyword cfTagName contained cfformgroup cfformitem cfftp cffunction cfgraph cfgraphdata +-syn keyword cfTagName contained cfgrid cfgridcolumn cfgridrow cfgridupdate cfheader +-syn keyword cfTagName contained cfhtmlhead cfhttp cfhttpparam cfif cfimport +-syn keyword cfTagName contained cfinclude cfindex cfinput cfinsert cfinvoke cfinvokeargument +-syn keyword cfTagName contained cfldap cflocation cflock cflog cflogin cfloginuser cflogout +-syn keyword cfTagName contained cfloop cfmail cfmailparam cfmailpart cfmodule +-syn keyword cfTagName contained cfNTauthenticate cfobject cfobjectcache cfoutput cfparam +-syn keyword cfTagName contained cfpop cfprocessingdirective cfprocparam cfprocresult +-syn keyword cfTagName contained cfproperty cfquery cfqueryparam cfregistry cfreport +-syn keyword cfTagName contained cfreportparam cfrethrow cfreturn cfsavecontent cfschedule +-syn keyword cfTagName contained cfscript cfsearch cfselect cfservlet cfservletparam cfset +-syn keyword cfTagName contained cfsetting cfsilent cfslider cfstoredproc cfswitch cftable +-syn keyword cfTagName contained cftextarea cftextinput cfthrow cftimer cftrace cftransaction +-syn keyword cfTagName contained cftree cftreeitem cftry cfupdate cfwddx cfxml +- +-" Tag parameters. +-syn keyword cfArg contained abort accept access accessible action addnewline addtoken +-syn keyword cfArg contained agentname align appendkey appletsource application +-syn keyword cfArg contained applicationtimeout applicationtoken archive +-syn keyword cfArg contained argumentcollection arguments asciiextensionlist +-syn keyword cfArg contained attachmentpath attributecollection attributes autowidth +-syn keyword cfArg contained backgroundvisible basetag bcc bgcolor bind bindingname +-syn keyword cfArg contained blockfactor body bold border branch cachedafter cachedwithin +-syn keyword cfArg contained casesensitive category categorytree cc cfsqltype charset +-syn keyword cfArg contained chartheight chartwidth checked class clientmanagement +-syn keyword cfArg contained clientstorage codebase colheaderalign colheaderbold +-syn keyword cfArg contained colheaderfont colheaderfontsize colheaderitalic colheaders +-syn keyword cfArg contained colheadertextcolor collection colorlist colspacing columns +-syn keyword cfArg contained completepath component condition connection contentid +-syn keyword cfArg contained context contextbytes contexthighlightbegin +-syn keyword cfArg contained contexthighlightend contextpassages cookiedomain criteria +-syn keyword cfArg contained custom1 custom2 custom3 custom4 data dataalign +-syn keyword cfArg contained databackgroundcolor datacollection datasource daynames +-syn keyword cfArg contained dbname dbserver dbtype dbvarname debug default delete +-syn keyword cfArg contained deletebutton deletefile delimiter delimiters description +-syn keyword cfArg contained destination detail directory disabled display displayname +-syn keyword cfArg contained disposition dn domain editable enablecab enablecfoutputonly +-syn keyword cfArg contained enabled encoded encryption enctype enddate endrange endtime +-syn keyword cfArg contained entry errorcode exception existing expand expires expireurl +-syn keyword cfArg contained expression extendedinfo extends extensions external +-syn keyword cfArg contained failifexists failto file filefield filename filter +-syn keyword cfArg contained firstdayofweek firstrowasheaders fixnewline font fontbold +-syn keyword cfArg contained fontembed fontitalic fontsize foregroundcolor format +-syn keyword cfArg contained formfields formula from generateuniquefilenames getasbinary +-syn keyword cfArg contained grid griddataalign gridlines groovecolor group +-syn keyword cfArg contained groupcasesensitive header headeralign headerbold headerfont +-syn keyword cfArg contained headerfontsize headeritalic headerlines headertextcolor +-syn keyword cfArg contained height highlighthref hint href hrefkey hscroll hspace html +-syn keyword cfArg contained htmltable id idletimeout img imgopen imgstyle index inline +-syn keyword cfArg contained input insert insertbutton interval isolation italic item +-syn keyword cfArg contained itemcolumn key keyonly label labelformat language list +-syn keyword cfArg contained listgroups locale localfile log loginstorage lookandfeel +-syn keyword cfArg contained mailerid mailto marginbottom marginleft marginright +-syn keyword cfArg contained margintop markersize markerstyle mask max maxlength maxrows +-syn keyword cfArg contained message messagenumber method mimeattach mimetype min mode +-syn keyword cfArg contained modifytype monthnames multipart multiple name nameconflict +-syn keyword cfArg contained namespace new newdirectory notsupported null numberformat +-syn keyword cfArg contained object omit onblur onchange onclick onerror onfocus +-syn keyword cfArg contained onkeydown onkeyup onload onmousedown onmouseup onreset +-syn keyword cfArg contained onsubmit onvalidate operation orderby orientation output +-syn keyword cfArg contained outputfile overwrite ownerpassword pageencoding pageheight +-syn keyword cfArg contained pagetype pagewidth paintstyle param_1 param_2 param_3 +-syn keyword cfArg contained param_4 param_5 param_6 param_7 param_8 param_9 parent +-syn keyword cfArg contained parrent passive passthrough password path pattern +-syn keyword cfArg contained permissions picturebar pieslicestyle port porttypename +-syn keyword cfArg contained prefix preloader preservedata previouscriteria procedure +-syn keyword cfArg contained protocol provider providerdsn proxybypass proxypassword +-syn keyword cfArg contained proxyport proxyserver proxyuser publish query queryasroot +-syn keyword cfArg contained queryposition range rebind recurse redirect referral +-syn keyword cfArg contained refreshlabel remotefile replyto report requesttimeout +-syn keyword cfArg contained required reset resoleurl resolveurl result resultset +-syn keyword cfArg contained retrycount returnasbinary returncode returntype +-syn keyword cfArg contained returnvariable roles rotated rowheaderalign rowheaderbold +-syn keyword cfArg contained rowheaderfont rowheaderfontsize rowheaderitalic rowheaders +-syn keyword cfArg contained rowheadertextcolor rowheaderwidth rowheight scale scalefrom +-syn keyword cfArg contained scaleto scope scriptprotect scriptsrc secure securitycontext +-syn keyword cfArg contained select selectcolor selected selecteddate selectedindex +-syn keyword cfArg contained selectmode separator seriescolor serieslabel seriesplacement +-syn keyword cfArg contained server serviceport serviceportname sessionmanagement +-syn keyword cfArg contained sessiontimeout setclientcookies setcookie setdomaincookies +-syn keyword cfArg contained show3d showborder showdebugoutput showerror showlegend +-syn keyword cfArg contained showmarkers showxgridlines showygridlines size skin sort +-syn keyword cfArg contained sortascendingbutton sortcontrol sortdescendingbutton +-syn keyword cfArg contained sortxaxis source spoolenable sql src srcfile start startdate +-syn keyword cfArg contained startrange startrow starttime status statuscode statustext +-syn keyword cfArg contained step stoponerror style subject suggestions +-syn keyword cfArg contained suppresswhitespace tablename tableowner tablequalifier +-syn keyword cfArg contained taglib target task template text textcolor textqualifier +-syn keyword cfArg contained throwonerror throwonerror throwonfailure throwontimeout +-syn keyword cfArg contained timeout timespan tipbgcolor tipstyle title to tooltip +-syn keyword cfArg contained toplevelvariable transfermode type uid unit url urlpath +-syn keyword cfArg contained useragent username userpassword usetimezoneinfo validate +-syn keyword cfArg contained validateat value valuecolumn values valuesdelimiter +-syn keyword cfArg contained valuesdisplay var variable vertical visible vscroll vspace +-syn keyword cfArg contained webservice width wmode wraptext wsdlfile xaxistitle +-syn keyword cfArg contained xaxistype xoffset yaxistitle yaxistype yoffset +- +-" ColdFusion Functions. +-syn keyword cfFunctionName contained ACos ASin Abs AddSOAPRequestHeader AddSOAPResponseHeader +-syn keyword cfFunctionName contained ArrayAppend ArrayAvg ArrayClear ArrayDeleteAt ArrayInsertAt +-syn keyword cfFunctionName contained ArrayIsEmpty ArrayLen ArrayMax ArrayMin ArrayNew +-syn keyword cfFunctionName contained ArrayPrepend ArrayResize ArraySet ArraySort ArraySum +-syn keyword cfFunctionName contained ArraySwap ArrayToList Asc Atn AuthenticatedContext +-syn keyword cfFunctionName contained AuthenticatedUser BinaryDecode BinaryEncode BitAnd +-syn keyword cfFunctionName contained BitMaskClear BitMaskRead BitMaskSet BitNot BitOr BitSHLN +-syn keyword cfFunctionName contained BitSHRN BitXor CJustify Ceiling CharsetDecode CharsetEncode +-syn keyword cfFunctionName contained Chr Compare CompareNoCase Cos CreateDate CreateDateTime +-syn keyword cfFunctionName contained CreateODBCDate CreateODBCDateTime CreateODBCTime +-syn keyword cfFunctionName contained CreateObject CreateTime CreateTimeSpan CreateUUID DE DateAdd +-syn keyword cfFunctionName contained DateCompare DateConvert DateDiff DateFormat DatePart Day +-syn keyword cfFunctionName contained DayOfWeek DayOfWeekAsString DayOfYear DaysInMonth DaysInYear +-syn keyword cfFunctionName contained DecimalFormat DecrementValue Decrypt DecryptBinary +-syn keyword cfFunctionName contained DeleteClientVariable DirectoryExists DollarFormat Duplicate +-syn keyword cfFunctionName contained Encrypt EncryptBinary Evaluate Exp ExpandPath FileExists +-syn keyword cfFunctionName contained Find FindNoCase FindOneOf FirstDayOfMonth Fix FormatBaseN +-syn keyword cfFunctionName contained GenerateSecretKey GetAuthUser GetBaseTagData GetBaseTagList +-syn keyword cfFunctionName contained GetBaseTemplatePath GetClientVariablesList GetContextRoot +-syn keyword cfFunctionName contained GetCurrentTemplatePath GetDirectoryFromPath GetEncoding +-syn keyword cfFunctionName contained GetException GetFileFromPath GetFunctionList +-syn keyword cfFunctionName contained GetGatewayHelper GetHttpRequestData GetHttpTimeString +-syn keyword cfFunctionName contained GetLocalHostIP +-syn keyword cfFunctionName contained GetLocale GetLocaleDisplayName GetMetaData GetMetricData +-syn keyword cfFunctionName contained GetPageContext GetProfileSections GetProfileString +-syn keyword cfFunctionName contained GetSOAPRequest GetSOAPRequestHeader GetSOAPResponse +-syn keyword cfFunctionName contained GetSOAPResponseHeader GetTempDirectory GetTempFile +-syn keyword cfFunctionName contained GetTickCount GetTimeZoneInfo GetToken +-syn keyword cfFunctionName contained HTMLCodeFormat HTMLEditFormat Hash Hour IIf IncrementValue +-syn keyword cfFunctionName contained InputBaseN Insert Int IsArray IsAuthenticated IsAuthorized +-syn keyword cfFunctionName contained IsBinary IsBoolean IsCustomFunction IsDate IsDebugMode +-syn keyword cfFunctionName contained IsDefined +-syn keyword cfFunctionName contained IsLeapYear IsLocalHost IsNumeric +-syn keyword cfFunctionName contained IsNumericDate IsObject IsProtected IsQuery IsSOAPRequest +-syn keyword cfFunctionName contained IsSimpleValue IsStruct IsUserInRole IsValid IsWDDX IsXML +-syn keyword cfFunctionName contained IsXmlAttribute IsXmlDoc IsXmlElem IsXmlNode IsXmlRoot +-syn keyword cfFunctionName contained JSStringFormat JavaCast LCase LJustify LSCurrencyFormat +-syn keyword cfFunctionName contained LSDateFormat LSEuroCurrencyFormat LSIsCurrency LSIsDate +-syn keyword cfFunctionName contained LSIsNumeric LSNumberFormat LSParseCurrency LSParseDateTime +-syn keyword cfFunctionName contained LSParseEuroCurrency LSParseNumber LSTimeFormat LTrim Left +-syn keyword cfFunctionName contained Len ListAppend ListChangeDelims ListContains +-syn keyword cfFunctionName contained ListContainsNoCase ListDeleteAt ListFind ListFindNoCase +-syn keyword cfFunctionName contained ListFirst ListGetAt ListInsertAt ListLast ListLen +-syn keyword cfFunctionName contained ListPrepend ListQualify ListRest ListSetAt ListSort +-syn keyword cfFunctionName contained ListToArray ListValueCount ListValueCountNoCase Log Log10 +-syn keyword cfFunctionName contained Max Mid Min Minute Month MonthAsString Now NumberFormat +-syn keyword cfFunctionName contained ParagraphFormat ParseDateTime Pi +-syn keyword cfFunctionName contained PreserveSingleQuotes Quarter QueryAddColumn QueryAddRow +-syn keyword cfFunctionName contained QueryNew QuerySetCell QuotedValueList REFind REFindNoCase +-syn keyword cfFunctionName contained REReplace REReplaceNoCase RJustify RTrim Rand RandRange +-syn keyword cfFunctionName contained Randomize ReleaseComObject RemoveChars RepeatString Replace +-syn keyword cfFunctionName contained ReplaceList ReplaceNoCase Reverse Right Round Second +-syn keyword cfFunctionName contained SendGatewayMessage SetEncoding SetLocale SetProfileString +-syn keyword cfFunctionName contained SetVariable Sgn Sin SpanExcluding SpanIncluding Sqr StripCR +-syn keyword cfFunctionName contained StructAppend StructClear StructCopy StructCount StructDelete +-syn keyword cfFunctionName contained StructFind StructFindKey StructFindValue StructGet +-syn keyword cfFunctionName contained StructInsert StructIsEmpty StructKeyArray StructKeyExists +-syn keyword cfFunctionName contained StructKeyList StructNew StructSort StructUpdate Tan +-syn keyword cfFunctionName contained TimeFormat ToBase64 ToBinary ToScript ToString Trim UCase +-syn keyword cfFunctionName contained URLDecode URLEncodedFormat URLSessionFormat Val ValueList +-syn keyword cfFunctionName contained Week Wrap WriteOutput XmlChildPos XmlElemNew XmlFormat +-syn keyword cfFunctionName contained XmlGetNodeType XmlNew XmlParse XmlSearch XmlTransform +-syn keyword cfFunctionName contained XmlValidate Year YesNoFormat +- +-" Deprecated tags and functions. +-syn keyword cfDeprecated contained cfauthenticate cfimpersonate cfgraph cfgraphdata +-syn keyword cfDeprecated contained cfservlet cfservletparam cftextinput +-syn keyword cfDeprecated contained GetK2ServerDocCount GetK2ServerDocCountLimit GetTemplatePath +-syn keyword cfDeprecated contained IsK2ServerABroker IsK2ServerDocCountExceeded IsK2ServerOnline +-syn keyword cfDeprecated contained ParameterExists +- +-syn cluster htmlTagNameCluster add=cfTagName +-syn cluster htmlArgCluster add=cfArg,cfHashRegion,cfScope +-syn cluster htmlPreproc add=cfHashRegion ++" ColdFusion <=7: ++syn keyword cfTagName contained cfabort cfapplet cfapplication cfargument cfassociate ++syn keyword cfTagName contained cfbreak cfcache cfcalendar cfcase cfcatch ++syn keyword cfTagName contained cfchart cfchartdata cfchartseries cfcol cfcollection ++syn keyword cfTagName contained cfcomponent cfcontent cfcookie cfdefaultcase cfdirectory ++syn keyword cfTagName contained cfdocument cfdocumentitem cfdocumentsection cfdump cfelse ++syn keyword cfTagName contained cfelseif cferror cfexecute cfexit cffile cfflush cfform ++syn keyword cfTagName contained cfformgroup cfformitem cfftp cffunction ++syn keyword cfTagName contained cfgrid cfgridcolumn cfgridrow cfgridupdate cfheader ++syn keyword cfTagName contained cfhtmlhead cfhttp cfhttpparam cfif cfimport ++syn keyword cfTagName contained cfinclude cfindex cfinput cfinsert cfinvoke cfinvokeargument ++syn keyword cfTagName contained cfldap cflocation cflock cflog cflogin cfloginuser cflogout ++syn keyword cfTagName contained cfloop cfmail cfmailparam cfmailpart cfmodule ++syn keyword cfTagName contained cfNTauthenticate cfobject cfobjectcache cfoutput cfparam ++syn keyword cfTagName contained cfpop cfprocessingdirective cfprocparam cfprocresult ++syn keyword cfTagName contained cfproperty cfquery cfqueryparam cfregistry cfreport ++syn keyword cfTagName contained cfreportparam cfrethrow cfreturn cfsavecontent cfschedule ++syn keyword cfTagName contained cfscript cfsearch cfselect cfservletparam cfset ++syn keyword cfTagName contained cfsetting cfsilent cfslider cfstoredproc cfswitch cftable ++syn keyword cfTagName contained cftextarea cftextinput cfthrow cftimer cftrace cftransaction ++syn keyword cfTagName contained cftree cftreeitem cftry cfupdate cfwddx cfxml ++" ColdFusion 8: ++syn keyword cfTagName contained cfajaximport cfajaxproxy cfdbinfo cfdiv cfexchangecalendar ++syn keyword cfTagName contained cfexchangeconnection cfexchangecontact cfexchangefilter ++syn keyword cfTagName contained cfexchangemail cfexchangetask cffeed ++syn keyword cfTagName contained cfinterface cflayout cflayoutarea cfmenu cfmenuitem ++syn keyword cfTagName contained cfpdf cfpdfform cfpdfformparam cfpdfparam cfpdfsubform cfpod ++syn keyword cfTagName contained cfpresentation cfpresentationslide cfpresenter cfprint ++syn keyword cfTagName contained cfsprydataset cfthread cftooltip cfwindow cfzip cfzipparam ++" ColdFusion 9: ++syn keyword cfTagName contained cfcontinue cffileupload cffinally ++syn keyword cfTagName contained cfimage cfimap ++syn keyword cfTagName contained cfmap cfmapitem cfmediaplayer cfmessagebox ++syn keyword cfTagName contained cfprocparam cfprogressbar ++syn keyword cfTagName contained cfsharepoint cfspreadsheet ++ ++" Tag attributes. ++" XXX Not updated for ColdFusion 8/9. ++" These are becoming a headache to maintain, so might be removed. ++syn keyword cfArg contained abort accept access accessible action addnewline addtoken ++syn keyword cfArg contained agentname align appendkey appletsource application ++syn keyword cfArg contained applicationtimeout applicationtoken archive ++syn keyword cfArg contained argumentcollection arguments asciiextensionlist ++syn keyword cfArg contained attachmentpath attributecollection attributes autowidth ++syn keyword cfArg contained backgroundvisible basetag bcc bgcolor bind bindingname ++syn keyword cfArg contained blockfactor body bold border branch cachedafter cachedwithin ++syn keyword cfArg contained casesensitive category categorytree cc cfsqltype charset ++syn keyword cfArg contained chartheight chartwidth checked class clientmanagement ++syn keyword cfArg contained clientstorage codebase colheaderalign colheaderbold ++syn keyword cfArg contained colheaderfont colheaderfontsize colheaderitalic colheaders ++syn keyword cfArg contained colheadertextcolor collection colorlist colspacing columns ++syn keyword cfArg contained completepath component condition connection contentid ++syn keyword cfArg contained context contextbytes contexthighlightbegin ++syn keyword cfArg contained contexthighlightend contextpassages cookiedomain criteria ++syn keyword cfArg contained custom1 custom2 custom3 custom4 data dataalign ++syn keyword cfArg contained databackgroundcolor datacollection datasource daynames ++syn keyword cfArg contained dbname dbserver dbtype dbvarname debug default delete ++syn keyword cfArg contained deletebutton deletefile delimiter delimiters description ++syn keyword cfArg contained destination detail directory disabled display displayname ++syn keyword cfArg contained disposition dn domain editable enablecab enablecfoutputonly ++syn keyword cfArg contained enabled encoded encryption enctype enddate endrange endtime ++syn keyword cfArg contained entry errorcode exception existing expand expires expireurl ++syn keyword cfArg contained expression extendedinfo extends extensions external ++syn keyword cfArg contained failifexists failto file filefield filename filter ++syn keyword cfArg contained firstdayofweek firstrowasheaders fixnewline font fontbold ++syn keyword cfArg contained fontembed fontitalic fontsize foregroundcolor format ++syn keyword cfArg contained formfields formula from generateuniquefilenames getasbinary ++syn keyword cfArg contained grid griddataalign gridlines groovecolor group ++syn keyword cfArg contained groupcasesensitive header headeralign headerbold headerfont ++syn keyword cfArg contained headerfontsize headeritalic headerlines headertextcolor ++syn keyword cfArg contained height highlighthref hint href hrefkey hscroll hspace html ++syn keyword cfArg contained htmltable id idletimeout img imgopen imgstyle index inline ++syn keyword cfArg contained input insert insertbutton interval isolation italic item ++syn keyword cfArg contained itemcolumn key keyonly label labelformat language list ++syn keyword cfArg contained listgroups locale localfile log loginstorage lookandfeel ++syn keyword cfArg contained mailerid mailto marginbottom marginleft marginright ++syn keyword cfArg contained margintop markersize markerstyle mask max maxlength maxrows ++syn keyword cfArg contained message messagenumber method mimeattach mimetype min mode ++syn keyword cfArg contained modifytype monthnames multipart multiple name nameconflict ++syn keyword cfArg contained namespace new newdirectory notsupported null numberformat ++syn keyword cfArg contained object omit onblur onchange onclick onerror onfocus ++syn keyword cfArg contained onkeydown onkeyup onload onmousedown onmouseup onreset ++syn keyword cfArg contained onsubmit onvalidate operation orderby orientation output ++syn keyword cfArg contained outputfile overwrite ownerpassword pageencoding pageheight ++syn keyword cfArg contained pagetype pagewidth paintstyle param_1 param_2 param_3 ++syn keyword cfArg contained param_4 param_5 param_6 param_7 param_8 param_9 parent ++syn keyword cfArg contained parrent passive passthrough password path pattern ++syn keyword cfArg contained permissions picturebar pieslicestyle port porttypename ++syn keyword cfArg contained prefix preloader preservedata previouscriteria procedure ++syn keyword cfArg contained protocol provider providerdsn proxybypass proxypassword ++syn keyword cfArg contained proxyport proxyserver proxyuser publish query queryasroot ++syn keyword cfArg contained queryposition range rebind recurse redirect referral ++syn keyword cfArg contained refreshlabel remotefile replyto report requesttimeout ++syn keyword cfArg contained required reset resoleurl resolveurl result resultset ++syn keyword cfArg contained retrycount returnasbinary returncode returntype ++syn keyword cfArg contained returnvariable roles rotated rowheaderalign rowheaderbold ++syn keyword cfArg contained rowheaderfont rowheaderfontsize rowheaderitalic rowheaders ++syn keyword cfArg contained rowheadertextcolor rowheaderwidth rowheight scale scalefrom ++syn keyword cfArg contained scaleto scope scriptprotect scriptsrc secure securitycontext ++syn keyword cfArg contained select selectcolor selected selecteddate selectedindex ++syn keyword cfArg contained selectmode separator seriescolor serieslabel seriesplacement ++syn keyword cfArg contained server serviceport serviceportname sessionmanagement ++syn keyword cfArg contained sessiontimeout setclientcookies setcookie setdomaincookies ++syn keyword cfArg contained show3d showborder showdebugoutput showerror showlegend ++syn keyword cfArg contained showmarkers showxgridlines showygridlines size skin sort ++syn keyword cfArg contained sortascendingbutton sortcontrol sortdescendingbutton ++syn keyword cfArg contained sortxaxis source spoolenable sql src srcfile start startdate ++syn keyword cfArg contained startrange startrow starttime status statuscode statustext ++syn keyword cfArg contained step stoponerror style subject suggestions ++syn keyword cfArg contained suppresswhitespace tablename tableowner tablequalifier ++syn keyword cfArg contained taglib target task template text textcolor textqualifier ++syn keyword cfArg contained throwonerror throwonerror throwonfailure throwontimeout ++syn keyword cfArg contained timeout timespan tipbgcolor tipstyle title to tooltip ++syn keyword cfArg contained toplevelvariable transfermode type uid unit url urlpath ++syn keyword cfArg contained useragent username userpassword usetimezoneinfo validate ++syn keyword cfArg contained validateat value valuecolumn values valuesdelimiter ++syn keyword cfArg contained valuesdisplay var variable vertical visible vscroll vspace ++syn keyword cfArg contained webservice width wmode wraptext wsdlfile xaxistitle ++syn keyword cfArg contained xaxistype xoffset yaxistitle yaxistype yoffset ++ ++" Functions. ++" ColdFusion <=7: ++syn keyword cfFunctionName contained ACos ASin Abs AddSOAPRequestHeader AddSOAPResponseHeader ++syn keyword cfFunctionName contained ArrayAppend ArrayAvg ArrayClear ArrayDeleteAt ArrayInsertAt ++syn keyword cfFunctionName contained ArrayIsEmpty ArrayLen ArrayMax ArrayMin ArrayNew ++syn keyword cfFunctionName contained ArrayPrepend ArrayResize ArraySet ArraySort ArraySum ++syn keyword cfFunctionName contained ArraySwap ArrayToList Asc Atn AuthenticatedContext ++syn keyword cfFunctionName contained AuthenticatedUser BinaryDecode BinaryEncode BitAnd ++syn keyword cfFunctionName contained BitMaskClear BitMaskRead BitMaskSet BitNot BitOr BitSHLN ++syn keyword cfFunctionName contained BitSHRN BitXor CJustify Ceiling CharsetDecode CharsetEncode ++syn keyword cfFunctionName contained Chr Compare CompareNoCase Cos CreateDate CreateDateTime ++syn keyword cfFunctionName contained CreateODBCDate CreateODBCDateTime CreateODBCTime ++syn keyword cfFunctionName contained CreateObject CreateTime CreateTimeSpan CreateUUID DE DateAdd ++syn keyword cfFunctionName contained DateCompare DateConvert DateDiff DateFormat DatePart Day ++syn keyword cfFunctionName contained DayOfWeek DayOfWeekAsString DayOfYear DaysInMonth DaysInYear ++syn keyword cfFunctionName contained DecimalFormat DecrementValue Decrypt DecryptBinary ++syn keyword cfFunctionName contained DeleteClientVariable DirectoryExists DollarFormat Duplicate ++syn keyword cfFunctionName contained Encrypt EncryptBinary Evaluate Exp ExpandPath FileExists ++syn keyword cfFunctionName contained Find FindNoCase FindOneOf FirstDayOfMonth Fix FormatBaseN ++syn keyword cfFunctionName contained GenerateSecretKey GetAuthUser GetBaseTagData GetBaseTagList ++syn keyword cfFunctionName contained GetBaseTemplatePath GetClientVariablesList GetContextRoot ++syn keyword cfFunctionName contained GetCurrentTemplatePath GetDirectoryFromPath GetEncoding ++syn keyword cfFunctionName contained GetException GetFileFromPath GetFunctionList ++syn keyword cfFunctionName contained GetGatewayHelper GetHttpRequestData GetHttpTimeString ++syn keyword cfFunctionName contained GetLocalHostIP ++syn keyword cfFunctionName contained GetLocale GetLocaleDisplayName GetMetaData GetMetricData ++syn keyword cfFunctionName contained GetPageContext GetProfileSections GetProfileString ++syn keyword cfFunctionName contained GetSOAPRequest GetSOAPRequestHeader GetSOAPResponse ++syn keyword cfFunctionName contained GetSOAPResponseHeader GetTempDirectory GetTempFile ++syn keyword cfFunctionName contained GetTickCount GetTimeZoneInfo GetToken ++syn keyword cfFunctionName contained HTMLCodeFormat HTMLEditFormat Hash Hour IIf IncrementValue ++syn keyword cfFunctionName contained InputBaseN Insert Int IsArray IsAuthenticated IsAuthorized ++syn keyword cfFunctionName contained IsBinary IsBoolean IsCustomFunction IsDate IsDebugMode ++syn keyword cfFunctionName contained IsDefined ++syn keyword cfFunctionName contained IsLeapYear IsLocalHost IsNumeric ++syn keyword cfFunctionName contained IsNumericDate IsObject IsProtected IsQuery IsSOAPRequest ++syn keyword cfFunctionName contained IsSimpleValue IsStruct IsUserInRole IsValid IsWDDX IsXML ++syn keyword cfFunctionName contained IsXmlAttribute IsXmlDoc IsXmlElem IsXmlNode IsXmlRoot ++syn keyword cfFunctionName contained JSStringFormat JavaCast LCase LJustify LSCurrencyFormat ++syn keyword cfFunctionName contained LSDateFormat LSEuroCurrencyFormat LSIsCurrency LSIsDate ++syn keyword cfFunctionName contained LSIsNumeric LSNumberFormat LSParseCurrency LSParseDateTime ++syn keyword cfFunctionName contained LSParseEuroCurrency LSParseNumber LSTimeFormat LTrim Left ++syn keyword cfFunctionName contained Len ListAppend ListChangeDelims ListContains ++syn keyword cfFunctionName contained ListContainsNoCase ListDeleteAt ListFind ListFindNoCase ++syn keyword cfFunctionName contained ListFirst ListGetAt ListInsertAt ListLast ListLen ++syn keyword cfFunctionName contained ListPrepend ListQualify ListRest ListSetAt ListSort ++syn keyword cfFunctionName contained ListToArray ListValueCount ListValueCountNoCase Log Log10 ++syn keyword cfFunctionName contained Max Mid Min Minute Month MonthAsString Now NumberFormat ++syn keyword cfFunctionName contained ParagraphFormat ParseDateTime Pi ++syn keyword cfFunctionName contained PreserveSingleQuotes Quarter QueryAddColumn QueryAddRow ++syn keyword cfFunctionName contained QueryNew QuerySetCell QuotedValueList REFind REFindNoCase ++syn keyword cfFunctionName contained REReplace REReplaceNoCase RJustify RTrim Rand RandRange ++syn keyword cfFunctionName contained Randomize ReleaseComObject RemoveChars RepeatString Replace ++syn keyword cfFunctionName contained ReplaceList ReplaceNoCase Reverse Right Round Second ++syn keyword cfFunctionName contained SendGatewayMessage SetEncoding SetLocale SetProfileString ++syn keyword cfFunctionName contained SetVariable Sgn Sin SpanExcluding SpanIncluding Sqr StripCR ++syn keyword cfFunctionName contained StructAppend StructClear StructCopy StructCount StructDelete ++syn keyword cfFunctionName contained StructFind StructFindKey StructFindValue StructGet ++syn keyword cfFunctionName contained StructInsert StructIsEmpty StructKeyArray StructKeyExists ++syn keyword cfFunctionName contained StructKeyList StructNew StructSort StructUpdate Tan ++syn keyword cfFunctionName contained TimeFormat ToBase64 ToBinary ToScript ToString Trim UCase ++syn keyword cfFunctionName contained URLDecode URLEncodedFormat URLSessionFormat Val ValueList ++syn keyword cfFunctionName contained Week Wrap WriteOutput XmlChildPos XmlElemNew XmlFormat ++syn keyword cfFunctionName contained XmlGetNodeType XmlNew XmlParse XmlSearch XmlTransform ++syn keyword cfFunctionName contained XmlValidate Year YesNoFormat ++" ColdFusion 8: ++syn keyword cfFunctionName contained AjaxLink AjaxOnLoad ArrayIsDefined BinaryDecode BinaryEncode CharsetDecode CharsetEncode ++syn keyword cfFunctionName contained DecryptBinary DeserializeJSON DotNetToCFType EncryptBinary FileClose FileCopy FileDelete ++syn keyword cfFunctionName contained FileIsEOF FileMove FileOpen FileRead FileReadBinary FileReadLine FileSetAccessMode FileSetAttribute ++syn keyword cfFunctionName contained FileSetLastModified FileWrite GenerateSecretKey GetGatewayHelper GetAuthUser GetComponentMetaData ++syn keyword cfFunctionName contained GetContextRoot GetEncoding GetFileInfo GetLocaleDisplayName GetLocalHostIP GetMetaData ++syn keyword cfFunctionName contained GetPageContext GetPrinterInfo GetProfileSections GetReadableImageFormats GetSOAPRequest ++syn keyword cfFunctionName contained GetSOAPRequestHeader GetSOAPResponse GetSOAPResponseHeader GetUserRoles GetWriteableImageFormats ++syn keyword cfFunctionName contained ImageAddBorder ImageBlur ImageClearRect ImageCopy ImageCrop ImageDrawArc ImageDrawBeveledRect ++syn keyword cfFunctionName contained ImageDrawCubicCurve ImageDrawPoint ImageDrawLine ImageDrawLines ImageDrawOval ++syn keyword cfFunctionName contained ImageDrawQuadraticCurve ImageDrawRect ImageDrawRoundRect ImageDrawText ImageFlip ImageGetBlob ++syn keyword cfFunctionName contained ImageGetBufferedImage ImageGetEXIFMetadata ImageGetEXIFTag ImageGetHeight ImageGetIPTCMetadata ++syn keyword cfFunctionName contained ImageGetIPTCTag ImageGetWidth ImageGrayscale ImageInfo ImageNegative ImageNew ImageOverlay ++syn keyword cfFunctionName contained ImagePaste ImageRead ImageReadBase64 ImageResize ImageRotate ImageRotateDrawingAxis ImageScaleToFit ++" ColdFusion 9: ++syn keyword cfFunctionName contained ApplicationStop ArrayContains ArrayDelete ArrayFind ArrayFindNoCase IsSpreadsheetFile ++syn keyword cfFunctionName contained IsSpreadsheetObject FileSkipBytes Location ObjectLoad SpreadsheetFormatColumn ++syn keyword cfFunctionName contained SpreadsheetFormatColumns SpreadsheetFormatRow SpreadsheetFormatRows SpreadsheetGetCellComment ++syn keyword cfFunctionName contained CacheGetAllIds CacheGetMetadata CacheGetProperties CacheGet CachePut ObjectSave ORMClearSession ++syn keyword cfFunctionName contained ORMCloseSession ORMEvictQueries ORMEvictCollection SpreadsheetGetCellFormula SpreadsheetGetCellValue ++syn keyword cfFunctionName contained SpreadsheetInfo SpreadsheetMergeCells SpreadsheetNew CacheRemove CacheSetProperties DirectoryCreate ++syn keyword cfFunctionName contained DirectoryDelete DirectoryExists ORMEvictEntity ORMEvictQueries ORMExecuteQuery ORMFlush ++syn keyword cfFunctionName contained ORMGetSession SpreadsheetRead SpreadsheetReadBinary SpreadsheetSetActiveSheetNumber ++syn keyword cfFunctionName contained SpreadsheetSetCellComment SpreadsheetSetCellFormula DirectoryList DirectoryRename EntityDelete ++syn keyword cfFunctionName contained EntityLoad EntityLoadByExample ORMGetSessionFactory ORMReload ObjectEquals SpreadsheetAddColumn ++syn keyword cfFunctionName contained SpreadsheetAddFreezePane SpreadsheetSetCellValue SpreadsheetSetActiveSheet SpreadsheetSetFooter ++syn keyword cfFunctionName contained SpreadsheetSetHeader SpreadsheetSetColumnWidth EntityLoadByPK EntityMerge EntityNew EntityReload ++syn keyword cfFunctionName contained EntitySave SpreadsheetAddImage SpreadsheetAddInfo SpreadsheetAddRow SpreadsheetAddRows ++syn keyword cfFunctionName contained SpreadsheetAddSplitPane SpreadsheetShiftColumns SpreadsheetShiftRows SpreadsheetSetRowHeight ++syn keyword cfFunctionName contained SpreadsheetWrite Trace FileDelete FileSeek FileWriteLine GetFunctionCalledName GetVFSMetaData IsIPv6 ++syn keyword cfFunctionName contained IsNull SpreadsheetCreateSheet SpreadsheetDeleteColumn SpreadsheetDeleteColumns SpreadsheetDeleteRow ++syn keyword cfFunctionName contained SpreadsheetDeleteRows SpreadsheetFormatCell TransactionCommit TransactionRollback ++syn keyword cfFunctionName contained TransactionSetSavePoint ThreadTerminate ThreadJoin Throw Writedump Writelog ++ ++" Deprecated or obsoleted tags and functions. ++syn keyword cfDeprecatedTag contained cfauthenticate cfimpersonate cfgraph cfgraphdata ++syn keyword cfDeprecatedTag contained cfservlet cfservletparam cftextinput ++syn keyword cfDeprecatedTag contained cfinternaladminsecurity cfnewinternaladminsecurity ++syn keyword cfDeprecatedFunction contained GetK2ServerDocCount GetK2ServerDocCountLimit GetTemplatePath ++syn keyword cfDeprecatedFunction contained IsK2ServerABroker IsK2ServerDocCountExceeded IsK2ServerOnline ++syn keyword cfDeprecatedFunction contained ParameterExists AuthenticatedContext AuthenticatedUser ++syn keyword cfDeprecatedFunction contained isAuthenticated isAuthorized isProtected ++ ++" Add to the HTML clusters. ++syn cluster htmlTagNameCluster add=cfTagName,cfCustomTagName,cfDeprecatedTag ++syn cluster htmlArgCluster add=cfArg,cfHashRegion,cfScope ++syn cluster htmlPreproc add=cfHashRegion + +-syn cluster cfExpressionCluster contains=cfFunctionName,cfScope,@cfOperatorCluster,cfScriptStringD,cfScriptStringS,cfScriptNumber,cfBool ++syn cluster cfExpressionCluster contains=cfFunctionName,cfScope,@cfOperatorCluster,cfScriptStringD,cfScriptStringS,cfScriptNumber,cfBool,cfComment + + " Evaluation; skip strings ( this helps with cases like nested IIf() ) +-syn region cfHashRegion start=+#+ skip=+"[^"]*"\|'[^']*'+ end=+#+ contains=@cfExpressionCluster,cfScriptParenError ++" containedin to add to the TOP of cfOutputRegion. ++syn region cfHashRegion start=+#+ skip=+"[^"]*"\|'[^']*'+ end=+#+ contained containedin=cfOutputRegion contains=@cfExpressionCluster,cfScriptParenError ++ ++" Hashmarks are significant inside cfoutput tags. ++" cfoutput tags may be nested indefinitely. ++syn region cfOutputRegion matchgroup=NONE transparent start=+<cfoutput>+ end=+</cfoutput>+ contains=TOP + + " <cfset>, <cfif>, <cfelseif>, <cfreturn> are analogous to hashmarks (implicit + " evaluation) and have 'var' +-syn region cfSetRegion start="<cfset " start="<cfreturn " start="<cfelseif " start="<cfif " end='>' keepend contains=@cfExpressionCluster,cfSetLHSRegion,cfSetTagEnd,cfScriptType +-syn region cfSetLHSRegion contained start="<cfreturn" start="<cfelseif" start="<cfif" start="<cfset" end=" " keepend contains=cfTagName,htmlTag +-syn match cfSetTagEnd contained '>' +- +-" CF comments: similar to SGML comments +-syn region cfComment start='<!---' end='--->' keepend contains=cfCommentTodo +-syn keyword cfCommentTodo contained TODO FIXME XXX TBD WTF ++syn region cfSetRegion start="<cfset\>" start="<cfreturn\>" start="<cfelseif\>" start="<cfif\>" end='>' keepend contains=@cfExpressionCluster,cfSetLHSRegion,cfSetTagEnd,cfScriptStatement ++syn region cfSetLHSRegion contained start="<cfreturn" start="<cfelseif" start="<cfif" start="<cfset" end="." keepend contains=cfTagName,htmlTag ++syn match cfSetTagEnd contained '>' ++ ++" CF comments: similar to SGML comments, but can be nested. ++syn region cfComment start='<!---' end='--->' contains=cfCommentTodo,cfComment ++syn keyword cfCommentTodo contained TODO FIXME XXX TBD WTF + + " CFscript +-syn match cfScriptLineComment contained "\/\/.*$" contains=cfCommentTodo +-syn region cfScriptComment contained start="/\*" end="\*/" contains=cfCommentTodo ++" TODO better support for new component/function def syntax ++" TODO better support for 'new' ++" TODO highlight metadata (@ ...) inside comments. ++syn match cfScriptLineComment contained "\/\/.*$" contains=cfCommentTodo ++syn region cfScriptComment contained start="/\*" end="\*/" contains=cfCommentTodo ++syn match cfScriptBraces contained "[{}]" ++syn keyword cfScriptStatement contained return var + " in CF, quotes are escaped by doubling +-syn region cfScriptStringD contained start=+"+ skip=+\\\\\|""+ end=+"+ extend contains=@htmlPreproc,cfHashRegion +-syn region cfScriptStringS contained start=+'+ skip=+\\\\\|''+ end=+'+ extend contains=@htmlPreproc,cfHashRegion +-syn match cfScriptNumber contained "\<\d\+\>" +-syn keyword cfScriptConditional contained if else +-syn keyword cfScriptRepeat contained while for in +-syn keyword cfScriptBranch contained break switch case default try catch continue +-syn keyword cfScriptFunction contained function +-syn keyword cfScriptType contained var +-syn match cfScriptBraces contained "[{}]" +-syn keyword cfScriptStatement contained return ++syn region cfScriptStringD contained start=+"+ skip=+\\\\\|""+ end=+"+ extend contains=@htmlPreproc,cfHashRegion ++syn region cfScriptStringS contained start=+'+ skip=+\\\\\|''+ end=+'+ extend contains=@htmlPreproc,cfHashRegion ++syn match cfScriptNumber contained "\<\d\+\>" ++syn keyword cfScriptConditional contained if else ++syn keyword cfScriptRepeat contained while for in ++syn keyword cfScriptBranch contained break switch case default try catch continue finally ++syn keyword cfScriptKeyword contained function ++" argumentCollection is a special argument to function calls ++syn keyword cfScriptSpecial contained argumentcollection ++" ColdFusion 9: ++syn keyword cfScriptStatement contained new import ++" CFscript equivalents of some tags ++syn keyword cfScriptKeyword contained abort component exit import include ++syn keyword cfScriptKeyword contained interface param pageencoding property rethrow thread transaction ++" function/component syntax ++syn keyword cfScriptSpecial contained required extends + +-syn cluster cfScriptCluster contains=cfScriptParen,cfScriptLineComment,cfScriptComment,cfScriptStringD,cfScriptStringS,cfScriptFunction,cfScriptNumber,cfScriptRegexpString,cfScriptBoolean,cfScriptBraces,cfHashRegion,cfFunctionName,cfScope,@cfOperatorCluster,cfScriptConditional,cfScriptRepeat,cfScriptBranch,cfScriptType,@cfExpressionCluster,cfScriptStatement ++ ++syn cluster cfScriptCluster contains=cfScriptParen,cfScriptLineComment,cfScriptComment,cfScriptStringD,cfScriptStringS,cfScriptFunction,cfScriptNumber,cfScriptRegexpString,cfScriptBoolean,cfScriptBraces,cfHashRegion,cfFunctionName,cfDeprecatedFunction,cfScope,@cfOperatorCluster,cfScriptConditional,cfScriptRepeat,cfScriptBranch,@cfExpressionCluster,cfScriptStatement,cfScriptSpecial,cfScriptKeyword + + " Errors caused by wrong parenthesis; skip strings +-syn region cfScriptParen contained transparent skip=+"[^"]*"\|'[^']*'+ start=+(+ end=+)+ contains=@cfScriptCluster +-syn match cfScrParenError contained +)+ ++syn region cfScriptParen contained transparent skip=+"[^"]*"\|'[^']*'+ start=+(+ end=+)+ contains=@cfScriptCluster ++syn match cfScrParenError contained +)+ + +-syn region cfscriptBlock matchgroup=NONE start="<cfscript>" end="<\/cfscript>"me=s-1 keepend contains=@cfScriptCluster,cfscriptTag,cfScrParenError +-syn region cfscriptTag contained start='<cfscript' end='>' keepend contains=cfTagName,htmlTag ++syn region cfscriptBlock matchgroup=NONE start="<cfscript>" end="<\/cfscript>"me=s-1 keepend contains=@cfScriptCluster,cfscriptTag,cfScrParenError ++syn region cfscriptTag contained start='<cfscript' end='>' keepend contains=cfTagName,htmlTag + + " CFML +-syn cluster cfmlCluster contains=cfComment,@htmlTagNameCluster,@htmlPreproc,cfSetRegion,cfscriptBlock ++syn cluster cfmlCluster contains=cfComment,@htmlTagNameCluster,@htmlPreproc,cfSetRegion,cfscriptBlock,cfOutputRegion + +-" cfquery = sql +-unlet b:current_syntax +-syn include @cfSql <sfile>:p:h/sql.vim ++" cfquery = sql syntax ++if exists("b:current_syntax") ++ unlet b:current_syntax ++endif ++syn include @cfSql $VIMRUNTIME/syntax/sql.vim + unlet b:current_syntax +-syn region cfqueryTag contained start=+<cfquery+ end=+>+ keepend contains=cfTagName,htmlTag +-syn region cfSqlregion start=+<cfquery[^>]*>+ keepend end=+<\/cfquery>+me=s-1 matchgroup=NONE contains=@cfSql,cfComment,@htmlTagNameCluster,cfqueryTag ++syn region cfqueryTag contained start=+<cfquery+ end=+>+ keepend contains=cfTagName,htmlTag ++syn region cfSqlregion start=+<cfquery\_[^>]*>+ keepend end=+</cfquery>+me=s-1 matchgroup=NONE contains=@cfSql,cfComment,@htmlTagNameCluster,cfqueryTag,cfHashRegion ++ ++" Define the highlighting. ++command -nargs=+ CfHiLink hi def link <args> + +-" Define the default highlighting. +-if version >= 508 || !exists("did_cf_syn_inits") +- if version < 508 +- let did_cf_syn_inits = 1 +- command -nargs=+ HiLink hi link <args> +- else +- command -nargs=+ HiLink hi def link <args> +- endif +- +- HiLink cfTagName Statement +- HiLink cfArg Type +- HiLink cfFunctionName Function +- HiLink cfHashRegion PreProc +- HiLink cfComment Comment +- HiLink cfCommentTodo Todo +- HiLink cfOperator Operator +- HiLink cfOperatorMatch Operator +- HiLink cfScope Title +- HiLink cfBool Constant +- +- HiLink cfscriptBlock Special +- HiLink cfscriptTag htmlTag +- HiLink cfSetRegion PreProc +- HiLink cfSetLHSRegion htmlTag +- HiLink cfSetTagEnd htmlTag +- +- HiLink cfScriptLineComment Comment +- HiLink cfScriptComment Comment +- HiLink cfScriptStringS String +- HiLink cfScriptStringD String +- HiLink cfScriptNumber cfScriptValue +- HiLink cfScriptConditional Conditional +- HiLink cfScriptRepeat Repeat +- HiLink cfScriptBranch Conditional +- HiLink cfScriptType Type +- HiLink cfScriptStatement Statement +- HiLink cfScriptBraces Function +- HiLink cfScriptFunction Function +- HiLink cfScriptError Error +- HiLink cfDeprecated Error +- HiLink cfScrParenError cfScriptError +- +- HiLink cfqueryTag htmlTag +- +- delcommand HiLink ++if exists("d_noinclude_html") ++ " The default html-style highlighting copied from html.vim. ++ CfHiLink htmlTag Function ++ CfHiLink htmlEndTag Identifier ++ CfHiLink htmlArg Type ++ CfHiLink htmlTagName htmlStatement ++ CfHiLink htmlValue String ++ CfHiLink htmlPreProc PreProc ++ CfHiLink htmlString String ++ CfHiLink htmlStatement Statement ++ CfHiLink htmlValue String ++ CfHiLink htmlTagError htmlError ++ CfHiLink htmlError Error + endif + ++CfHiLink cfTagName Statement ++CfHiLink cfCustomTagName Statement ++CfHiLink cfArg Type ++CfHiLink cfFunctionName Function ++CfHiLink cfHashRegion PreProc ++CfHiLink cfComment Comment ++CfHiLink cfCommentTodo Todo ++CfHiLink cfOperator Operator ++CfHiLink cfOperatorMatch Operator ++CfHiLink cfScope Title ++CfHiLink cfBool Constant ++ ++CfHiLink cfscriptBlock Special ++CfHiLink cfscriptTag htmlTag ++CfHiLink cfSetRegion PreProc ++CfHiLink cfSetLHSRegion htmlTag ++CfHiLink cfSetTagEnd htmlTag ++ ++CfHiLink cfScriptLineComment Comment ++CfHiLink cfScriptComment Comment ++CfHiLink cfScriptStringS String ++CfHiLink cfScriptStringD String ++CfHiLink cfScriptNumber cfScriptValue ++CfHiLink cfScriptConditional Conditional ++CfHiLink cfScriptRepeat Repeat ++CfHiLink cfScriptBranch Conditional ++CfHiLink cfScriptSpecial Type ++CfHiLink cfScriptStatement Statement ++CfHiLink cfScriptBraces Function ++CfHiLink cfScriptKeyword Function ++CfHiLink cfScriptError Error ++CfHiLink cfDeprecatedTag Error ++CfHiLink cfDeprecatedFunction Error ++CfHiLink cfScrParenError cfScriptError ++ ++CfHiLink cfqueryTag htmlTag ++ ++delcommand CfHiLink ++ + let b:current_syntax = "cf" + +-" vim: ts=8 sw=2 ++" vim: nowrap sw=2 ts=8 noet +diff -u -r --new-file runtime/syntax.orig/config.vim runtime/syntax/config.vim +--- runtime/syntax.orig/config.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/config.vim 2008-09-06 07:19:33.000000000 -0500 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: configure.in script: M4 with sh + " Maintainer: Christian Hammesr <ch@lathspell.westend.com> +-" Last Change: 2001 May 09 ++" Last Change: 2008 Sep 03 + + " Well, I actually even do not know much about m4. This explains why there + " is probably very much missing here, yet ! +@@ -26,7 +26,7 @@ + syn keyword configkeyword if then else fi test for in do done + syn keyword configspecial cat rm eval + syn region configstring start=+"+ skip=+\\"+ end=+"+ +-syn region configstring start=+`+ skip=+\\'+ end=+'+ ++syn region configstring start=+'+ skip=+\\'+ end=+'+ + syn region configstring start=+`+ skip=+\\'+ end=+`+ + + " Define the default highlighting. +diff -u -r --new-file runtime/syntax.orig/cs.vim runtime/syntax/cs.vim +--- runtime/syntax.orig/cs.vim 2006-05-03 16:20:02.000000000 -0500 ++++ runtime/syntax/cs.vim 2009-09-18 05:28:22.000000000 -0500 +@@ -2,7 +2,7 @@ + " Language: C# + " Maintainer: Anduin Withers <awithers@anduin.com> + " Former Maintainer: Johannes Zellner <johannes@zellner.org> +-" Last Change: Sun Apr 30 19:26:18 PDT 2006 ++" Last Change: Fri Aug 14 13:56:37 PDT 2009 + " Filenames: *.cs + " $Id: cs.vim,v 1.4 2006/05/03 21:20:02 vimboss Exp $ + " +@@ -78,8 +78,8 @@ + syn cluster xmlTagHook add=csXmlTag + + syn match csXmlCommentLeader +\/\/\/+ contained +-syn match csXmlComment +\/\/\/.*$+ contains=csXmlCommentLeader,@csXml +-syntax include @csXml <sfile>:p:h/xml.vim ++syn match csXmlComment +\/\/\/.*$+ contains=csXmlCommentLeader,@csXml,@Spell ++syntax include @csXml syntax/xml.vim + hi def link xmlRegion Comment + + +@@ -100,7 +100,7 @@ + " unicode characters + syn match csUnicodeNumber +\\\(u\x\{4}\|U\x\{8}\)+ contained contains=csUnicodeSpecifier + syn match csUnicodeSpecifier +\\[uU]+ contained +-syn region csVerbatimString start=+@"+ end=+"+ end=+$+ skip=+""+ contains=csVerbatimSpec,@Spell ++syn region csVerbatimString start=+@"+ end=+"+ skip=+""+ contains=csVerbatimSpec,@Spell + syn match csVerbatimSpec +@"+he=s+1 contained + syn region csString start=+"+ end=+"+ end=+$+ contains=csSpecialChar,csSpecialError,csUnicodeNumber,@Spell + syn match csCharacter "'[^']*'" contains=csSpecialChar,csSpecialCharError +diff -u -r --new-file runtime/syntax.orig/cucumber.vim runtime/syntax/cucumber.vim +--- runtime/syntax.orig/cucumber.vim 1969-12-31 18:00:00.000000000 -0600 ++++ runtime/syntax/cucumber.vim 2010-03-02 09:17:43.000000000 -0600 +@@ -0,0 +1,117 @@ ++" Vim syntax file ++" Language: Cucumber ++" Maintainer: Tim Pope <vimNOSPAM@tpope.org> ++" Filenames: *.feature ++ ++if exists("b:current_syntax") ++ finish ++endif ++ ++syn case match ++syn sync minlines=20 ++ ++let g:cucumber_languages = { ++ \"en": {"and": "And\\>", "background": "Background\\>", "but": "But\\>", "examples": "Scenarios\\>\\|Examples\\>", "feature": "Feature\\>", "given": "Given\\>", "scenario": "Scenario\\>", "scenario_outline": "Scenario Outline\\>", "then": "Then\\>", "when": "When\\>"}, ++ \"ar": {"and": "\\%u0648\\>", "background": "\\%u0627\\%u0644\\%u062e\\%u0644\\%u0641\\%u064a\\%u0629\\>", "but": "\\%u0644\\%u0643\\%u0646\\>", "examples": "\\%u0627\\%u0645\\%u062b\\%u0644\\%u0629\\>", "feature": "\\%u062e\\%u0627\\%u0635\\%u064a\\%u0629\\>", "given": "\\%u0628\\%u0641\\%u0631\\%u0636\\>", "scenario": "\\%u0633\\%u064a\\%u0646\\%u0627\\%u0631\\%u064a\\%u0648\\>", "scenario_outline": "\\%u0633\\%u064a\\%u0646\\%u0627\\%u0631\\%u064a\\%u0648 \\%u0645\\%u062e\\%u0637\\%u0637\\>", "then": "\\%u0627\\%u0630\\%u0627\\%u064b\\>\\|\\%u062b\\%u0645\\>", "when": "\\%u0639\\%u0646\\%u062f\\%u0645\\%u0627\\>\\|\\%u0645\\%u062a\\%u0649\\>"}, ++ \"bg": {"and": "\\%u0418\\>", "background": "\\%u041f\\%u0440\\%u0435\\%u0434\\%u0438\\%u0441\\%u0442\\%u043e\\%u0440\\%u0438\\%u044f\\>", "but": "\\%u041d\\%u043e\\>", "examples": "\\%u041f\\%u0440\\%u0438\\%u043c\\%u0435\\%u0440\\%u0438\\>", "feature": "\\%u0424\\%u0443\\%u043d\\%u043a\\%u0446\\%u0438\\%u043e\\%u043d\\%u0430\\%u043b\\%u043d\\%u043e\\%u0441\\%u0442\\>", "given": "\\%u0414\\%u0430\\%u0434\\%u0435\\%u043d\\%u043e\\>", "scenario": "\\%u0421\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u0439\\>", "scenario_outline": "\\%u0420\\%u0430\\%u043c\\%u043a\\%u0430 \\%u043d\\%u0430 \\%u0441\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u0439\\>", "then": "\\%u0422\\%u043e\\>", "when": "\\%u041a\\%u043e\\%u0433\\%u0430\\%u0442\\%u043e\\>"}, ++ \"cat": {"and": "I\\>", "background": "Antecedents\\>\\|Rerefons\\>", "but": "Per\\%u00f2\\>", "examples": "Exemples\\>", "feature": "Caracter\\%u00edstica\\>", "given": "Donada\\>\\|Donat\\>", "scenario": "Escenari\\>", "scenario_outline": "Esquema de l'escenari\\>", "then": "Aleshores\\>", "when": "Quan\\>"}, ++ \"cs": {"and": "A tak\\%u00e9\\>\\|A\\>", "background": "Pozad\\%u00ed\\>\\|Kontext\\>", "but": "Ale\\>", "examples": "P\\%u0159\\%u00edklady\\>", "feature": "Po\\%u017eadavek\\>", "given": "Pokud\\>", "scenario": "Sc\\%u00e9n\\%u00e1\\%u0159\\>", "scenario_outline": "N\\%u00e1\\%u010drt Sc\\%u00e9n\\%u00e1\\%u0159e\\>\\|Osnova sc\\%u00e9n\\%u00e1\\%u0159e\\>", "then": "Pak\\>", "when": "Kdy\\%u017e\\>"}, ++ \"cy": {"and": "A\\>", "background": "Cefndir\\>", "but": "Ond\\>", "examples": "Enghreifftiau\\>", "feature": "Arwedd\\>", "given": "anrhegedig a\\>", "scenario": "Scenario\\>", "scenario_outline": "Scenario Amlinellol\\>", "then": "Yna\\>", "when": "Pryd\\>"}, ++ \"da": {"and": "Og\\>", "background": "Baggrund\\>", "but": "Men\\>", "examples": "Eksempler\\>", "feature": "Egenskab\\>", "given": "Givet\\>", "scenario": "Scenarie\\>", "scenario_outline": "Abstrakt Scenario\\>", "then": "S\\%u00e5\\>", "when": "N\\%u00e5r\\>"}, ++ \"de": {"and": "Und\\>", "background": "Grundlage\\>", "but": "Aber\\>", "examples": "Beispiele\\>", "feature": "Funktionalit\\%u00e4t\\>", "given": "Gegeben sei\\>", "scenario": "Szenario\\>", "scenario_outline": "Szenariogrundriss\\>", "then": "Dann\\>", "when": "Wenn\\>"}, ++ \"en-au": {"and": "N\\>", "background": "Background\\>", "but": "Cept\\>", "examples": "Cobber\\>", "feature": "Crikey\\>", "given": "Ya know how\\>", "scenario": "Mate\\>", "scenario_outline": "Blokes\\>", "then": "Ya gotta\\>", "when": "When\\>"}, ++ \"en-lol": {"and": "AN\\>", "background": "B4\\>", "but": "BUT\\>", "examples": "EXAMPLZ\\>", "feature": "OH HAI\\>", "given": "I CAN HAZ\\>", "scenario": "MISHUN\\>", "scenario_outline": "MISHUN SRSLY\\>", "then": "DEN\\>", "when": "WEN\\>"}, ++ \"es": {"and": "Y\\>", "background": "Antecedentes\\>", "but": "Pero\\>", "examples": "Ejemplos\\>", "feature": "Caracter\\%u00edstica\\>", "given": "Dado\\>", "scenario": "Escenario\\>", "scenario_outline": "Esquema del escenario\\>", "then": "Entonces\\>", "when": "Cuando\\>"}, ++ \"et": {"and": "Ja\\>", "background": "Taust\\>", "but": "Kuid\\>", "examples": "Juhtumid\\>", "feature": "Omadus\\>", "given": "Eeldades\\>", "scenario": "Stsenaarium\\>", "scenario_outline": "Raamstsenaarium\\>", "then": "Siis\\>", "when": "Kui\\>"}, ++ \"fi": {"and": "Ja\\>", "background": "Tausta\\>", "but": "Mutta\\>", "examples": "Tapaukset\\>", "feature": "Ominaisuus\\>", "given": "Oletetaan\\>", "scenario": "Tapaus\\>", "scenario_outline": "Tapausaihio\\>", "then": "Niin\\>", "when": "Kun\\>"}, ++ \"fr": {"and": "Et\\>", "background": "Contexte\\>", "but": "Mais\\>", "examples": "Exemples\\>", "feature": "Fonctionnalit\\%u00e9\\>", "given": "Etant donn\\%u00e9\\>\\|Soit\\>", "scenario": "Sc\\%u00e9nario\\>", "scenario_outline": "Plan du sc\\%u00e9nario\\>\\|Plan du Sc\\%u00e9nario\\>", "then": "Alors\\>", "when": "Lorsqu'\\|Lorsque\\>\\|Quand\\>"}, ++ \"he": {"and": "\\%u05d5\\%u05d2\\%u05dd\\>", "background": "\\%u05e8\\%u05e7\\%u05e2\\>", "but": "\\%u05d0\\%u05d1\\%u05dc\\>", "examples": "\\%u05d3\\%u05d5\\%u05d2\\%u05de\\%u05d0\\%u05d5\\%u05ea\\>", "feature": "\\%u05ea\\%u05db\\%u05d5\\%u05e0\\%u05d4\\>", "given": "\\%u05d1\\%u05d4\\%u05d9\\%u05e0\\%u05ea\\%u05df\\>", "scenario": "\\%u05ea\\%u05e8\\%u05d7\\%u05d9\\%u05e9\\>", "scenario_outline": "\\%u05ea\\%u05d1\\%u05e0\\%u05d9\\%u05ea \\%u05ea\\%u05e8\\%u05d7\\%u05d9\\%u05e9\\>", "then": "\\%u05d0\\%u05d6\\%u05d9\\>\\|\\%u05d0\\%u05d6\\>", "when": "\\%u05db\\%u05d0\\%u05e9\\%u05e8\\>"}, ++ \"hr": {"and": "I\\>", "background": "Pozadina\\>", "but": "Ali\\>", "examples": "Scenariji\\>\\|Primjeri\\>", "feature": "Mogu\\%u0107nost\\>\\|Mogucnost\\>\\|Osobina\\>", "given": "Zadano\\>\\|Zadani\\>\\|Zadan\\>", "scenario": "Scenarij\\>", "scenario_outline": "Koncept\\>\\|Skica\\>", "then": "Onda\\>", "when": "Kada\\>\\|Kad\\>"}, ++ \"hu": {"and": "\\%u00c9s\\>", "background": "H\\%u00e1tt\\%u00e9r\\>", "but": "De\\>", "examples": "P\\%u00e9ld\\%u00e1k\\>", "feature": "Jellemz\\%u0151\\>", "given": "Ha\\>", "scenario": "Forgat\\%u00f3k\\%u00f6nyv\\>", "scenario_outline": "Forgat\\%u00f3k\\%u00f6nyv v\\%u00e1zlat\\>", "then": "Akkor\\>", "when": "Majd\\>"}, ++ \"id": {"and": "Dan\\>", "background": "Dasar\\>", "but": "Tapi\\>", "examples": "Contoh\\>", "feature": "Fitur\\>", "given": "Dengan\\>", "scenario": "Skenario\\>", "scenario_outline": "Skenario konsep\\>", "then": "Maka\\>", "when": "Ketika\\>"}, ++ \"it": {"and": "E\\>", "background": "Contesto\\>", "but": "Ma\\>", "examples": "Esempi\\>", "feature": "Funzionalit\\%u00e0\\>", "given": "Dato\\>", "scenario": "Scenario\\>", "scenario_outline": "Schema dello scenario\\>", "then": "Allora\\>", "when": "Quando\\>"}, ++ \"ja": {"and": "\\%u304b\\%u3064", "background": "\\%u80cc\\%u666f\\>", "but": "\\%u3057\\%u304b\\%u3057\\|\\%u305f\\%u3060\\%u3057\\|\\%u4f46\\%u3057", "examples": "\\%u30b5\\%u30f3\\%u30d7\\%u30eb\\>\\|\\%u4f8b\\>", "feature": "\\%u30d5\\%u30a3\\%u30fc\\%u30c1\\%u30e3\\>\\|\\%u6a5f\\%u80fd\\>", "given": "\\%u524d\\%u63d0", "scenario": "\\%u30b7\\%u30ca\\%u30ea\\%u30aa\\>", "scenario_outline": "\\%u30b7\\%u30ca\\%u30ea\\%u30aa\\%u30a2\\%u30a6\\%u30c8\\%u30e9\\%u30a4\\%u30f3\\>\\|\\%u30b7\\%u30ca\\%u30ea\\%u30aa\\%u30c6\\%u30f3\\%u30d7\\%u30ec\\%u30fc\\%u30c8\\>\\|\\%u30b7\\%u30ca\\%u30ea\\%u30aa\\%u30c6\\%u30f3\\%u30d7\\%u30ec\\>\\|\\%u30c6\\%u30f3\\%u30d7\\%u30ec\\>", "then": "\\%u306a\\%u3089\\%u3070", "when": "\\%u3082\\%u3057"}, ++ \"ko": {"and": "\\%uadf8\\%ub9ac\\%uace0", "background": "\\%ubc30\\%uacbd\\>", "but": "\\%ud558\\%uc9c0\\%ub9cc", "examples": "\\%uc608\\>", "feature": "\\%uae30\\%ub2a5\\>", "given": "\\%uc870\\%uac74", "scenario": "\\%uc2dc\\%ub098\\%ub9ac\\%uc624\\>", "scenario_outline": "\\%uc2dc\\%ub098\\%ub9ac\\%uc624 \\%uac1c\\%uc694\\>", "then": "\\%uadf8\\%ub7ec\\%uba74", "when": "\\%ub9cc\\%uc77c"}, ++ \"lt": {"and": "Ir\\>", "background": "Kontekstas\\>", "but": "Bet\\>", "examples": "Pavyzd\\%u017eiai\\>\\|Scenarijai\\>\\|Variantai\\>", "feature": "Savyb\\%u0117\\>", "given": "Duota\\>", "scenario": "Scenarijus\\>", "scenario_outline": "Scenarijaus \\%u0161ablonas\\>", "then": "Tada\\>", "when": "Kai\\>"}, ++ \"lv": {"and": "Un\\>", "background": "Situ\\%u0101cija\\>\\|Konteksts\\>", "but": "Bet\\>", "examples": "Piem\\%u0113ri\\>\\|Paraugs\\>", "feature": "Funkcionalit\\%u0101te\\>\\|F\\%u012b\\%u010da\\>", "given": "Kad\\>", "scenario": "Scen\\%u0101rijs\\>", "scenario_outline": "Scen\\%u0101rijs p\\%u0113c parauga\\>", "then": "Tad\\>", "when": "Ja\\>"}, ++ \"nl": {"and": "En\\>", "background": "Achtergrond\\>", "but": "Maar\\>", "examples": "Voorbeelden\\>", "feature": "Functionaliteit\\>", "given": "Gegeven\\>\\|Stel\\>", "scenario": "Scenario\\>", "scenario_outline": "Abstract Scenario\\>", "then": "Dan\\>", "when": "Als\\>"}, ++ \"no": {"and": "Og\\>", "background": "Bakgrunn\\>", "but": "Men\\>", "examples": "Eksempler\\>", "feature": "Egenskap\\>", "given": "Gitt\\>", "scenario": "Scenario\\>", "scenario_outline": "Abstrakt Scenario\\>", "then": "S\\%u00e5\\>", "when": "N\\%u00e5r\\>"}, ++ \"pl": {"and": "Oraz\\>", "background": "Za\\%u0142o\\%u017cenia\\>", "but": "Ale\\>", "examples": "Przyk\\%u0142ady\\>", "feature": "W\\%u0142a\\%u015bciwo\\%u015b\\%u0107\\>", "given": "Zak\\%u0142adaj\\%u0105c\\>", "scenario": "Scenariusz\\>", "scenario_outline": "Szablon scenariusza\\>", "then": "Wtedy\\>", "when": "Je\\%u017celi\\>"}, ++ \"pt": {"and": "E\\>", "background": "Contexto\\>", "but": "Mas\\>", "examples": "Exemplos\\>", "feature": "Funcionalidade\\>", "given": "Dado\\>", "scenario": "Cen\\%u00e1rio\\>\\|Cenario\\>", "scenario_outline": "Esquema do Cen\\%u00e1rio\\>\\|Esquema do Cenario\\>", "then": "Ent\\%u00e3o\\>\\|Entao\\>", "when": "Quando\\>"}, ++ \"ro": {"and": "Si\\>", "background": "Conditii\\>", "but": "Dar\\>", "examples": "Exemplele\\>", "feature": "Functionalitate\\>", "given": "Daca\\>", "scenario": "Scenariu\\>", "scenario_outline": "Scenariul de sablon\\>", "then": "Atunci\\>", "when": "Cand\\>"}, ++ \"ro2": {"and": "\\%u0218i\\>", "background": "Condi\\%u0163ii\\>", "but": "Dar\\>", "examples": "Exemplele\\>", "feature": "Func\\%u021bionalitate\\>", "given": "Dac\\%u0103\\>", "scenario": "Scenariu\\>", "scenario_outline": "Scenariul de \\%u015fablon\\>", "then": "Atunci\\>", "when": "C\\%u00e2nd\\>"}, ++ \"ru": {"and": "\\%u041a \\%u0442\\%u043e\\%u043c\\%u0443 \\%u0436\\%u0435\\>\\|\\%u0418\\>", "background": "\\%u041f\\%u0440\\%u0435\\%u0434\\%u044b\\%u0441\\%u0442\\%u043e\\%u0440\\%u0438\\%u044f\\>", "but": "\\%u041d\\%u043e\\>\\|\\%u0410\\>", "examples": "\\%u0417\\%u043d\\%u0430\\%u0447\\%u0435\\%u043d\\%u0438\\%u044f\\>", "feature": "\\%u0424\\%u0443\\%u043d\\%u043a\\%u0446\\%u0438\\%u043e\\%u043d\\%u0430\\%u043b\\>", "given": "\\%u0414\\%u043e\\%u043f\\%u0443\\%u0441\\%u0442\\%u0438\\%u043c\\>", "scenario": "\\%u0421\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u0439\\>", "scenario_outline": "\\%u0421\\%u0442\\%u0440\\%u0443\\%u043a\\%u0442\\%u0443\\%u0440\\%u0430 \\%u0441\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u044f\\>", "then": "\\%u0422\\%u043e\\>", "when": "\\%u0415\\%u0441\\%u043b\\%u0438\\>"}, ++ \"se": {"and": "Och\\>", "background": "Bakgrund\\>", "but": "Men\\>", "examples": "Exempel\\>", "feature": "Egenskap\\>", "given": "Givet\\>", "scenario": "Scenario\\>", "scenario_outline": "Abstrakt Scenario\\>", "then": "S\\%u00e5\\>", "when": "N\\%u00e4r\\>"}, ++ \"sk": {"and": "A\\>", "background": "Pozadie\\>", "but": "Ale\\>", "examples": "Pr\\%u00edklady\\>", "feature": "Po\\%u017eiadavka\\>", "given": "Pokia\\%u013e\\>", "scenario": "Scen\\%u00e1r\\>", "scenario_outline": "N\\%u00e1\\%u010drt Scen\\%u00e1ru\\>", "then": "Tak\\>", "when": "Ke\\%u010f\\>"}, ++ \"sr": {"and": "\\%u0418\\>", "background": "\\%u041a\\%u043e\\%u043d\\%u0442\\%u0435\\%u043a\\%u0441\\%u0442\\>\\|\\%u041f\\%u043e\\%u0437\\%u0430\\%u0434\\%u0438\\%u043d\\%u0430\\>\\|\\%u041e\\%u0441\\%u043d\\%u043e\\%u0432\\%u0430\\>", "but": "\\%u0410\\%u043b\\%u0438\\>", "examples": "\\%u0421\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u0458\\%u0438\\>\\|\\%u041f\\%u0440\\%u0438\\%u043c\\%u0435\\%u0440\\%u0438\\>", "feature": "\\%u0424\\%u0443\\%u043d\\%u043a\\%u0446\\%u0438\\%u043e\\%u043d\\%u0430\\%u043b\\%u043d\\%u043e\\%u0441\\%u0442\\>\\|\\%u041c\\%u043e\\%u0433\\%u0443\\%u045b\\%u043d\\%u043e\\%u0441\\%u0442\\>\\|\\%u041e\\%u0441\\%u043e\\%u0431\\%u0438\\%u043d\\%u0430\\>", "given": "\\%u0417\\%u0430\\%u0434\\%u0430\\%u0442\\%u043e\\>\\|\\%u0417\\%u0430\\%u0434\\%u0430\\%u0442\\%u0435\\>\\|\\%u0417\\%u0430\\%u0434\\%u0430\\%u0442\\%u0438\\>", "scenario": "\\%u0421\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u043e\\>\\|\\%u041f\\%u0440\\%u0438\\%u043c\\%u0435\\%u0440\\>", "scenario_outline": "\\%u0421\\%u0442\\%u0440\\%u0443\\%u043a\\%u0442\\%u0443\\%u0440\\%u0430 \\%u0441\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u0458\\%u0430\\>\\|\\%u041a\\%u043e\\%u043d\\%u0446\\%u0435\\%u043f\\%u0442\\>\\|\\%u0421\\%u043a\\%u0438\\%u0446\\%u0430\\>", "then": "\\%u041e\\%u043d\\%u0434\\%u0430\\>", "when": "\\%u041a\\%u0430\\%u0434\\%u0430\\>\\|\\%u041a\\%u0430\\%u0434\\>"}, ++ \"sr-Latn": {"and": "I\\>", "background": "Kontekst\\>\\|Pozadina\\>\\|Osnova\\>", "but": "Ali\\>", "examples": "Scenariji\\>\\|Primeri\\>", "feature": "Mogu\\%u0107nost\\>\\|Funkcionalnost\\>\\|Mogucnost\\>\\|Osobina\\>", "given": "Zadato\\>\\|Zadate\\>\\|Zatati\\>", "scenario": "Scenario\\>\\|Primer\\>", "scenario_outline": "Struktura scenarija\\>\\|Koncept\\>\\|Skica\\>", "then": "Onda\\>", "when": "Kada\\>\\|Kad\\>"}, ++ \"tr": {"and": "Ve\\>", "background": "Ge\\%u00e7mi\\%u015f\\>", "but": "Fakat\\>\\|Ama\\>", "examples": "\\%u00d6rnekler\\>", "feature": "\\%u00d6zellik\\>", "given": "Diyelim ki\\>", "scenario": "Senaryo\\>", "scenario_outline": "Senaryo tasla\\%u011f\\%u0131\\>", "then": "O zaman\\>", "when": "E\\%u011fer ki\\>"}, ++ \"uz": {"and": "\\%u0412\\%u0430\\>", "background": "\\%u0422\\%u0430\\%u0440\\%u0438\\%u0445\\>", "but": "\\%u041b\\%u0435\\%u043a\\%u0438\\%u043d\\>\\|\\%u0411\\%u0438\\%u0440\\%u043e\\%u043a\\>\\|\\%u0410\\%u043c\\%u043c\\%u043e\\>", "examples": "\\%u041c\\%u0438\\%u0441\\%u043e\\%u043b\\%u043b\\%u0430\\%u0440\\>", "feature": "\\%u0424\\%u0443\\%u043d\\%u043a\\%u0446\\%u0438\\%u043e\\%u043d\\%u0430\\%u043b\\>", "given": "\\%u0410\\%u0433\\%u0430\\%u0440\\>", "scenario": "\\%u0421\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u0439\\>", "scenario_outline": "\\%u0421\\%u0446\\%u0435\\%u043d\\%u0430\\%u0440\\%u0438\\%u0439 \\%u0441\\%u0442\\%u0440\\%u0443\\%u043a\\%u0442\\%u0443\\%u0440\\%u0430\\%u0441\\%u0438\\>", "then": "\\%u0423\\%u043d\\%u0434\\%u0430\\>", "when": "\\%u0410\\%u0433\\%u0430\\%u0440\\>"}, ++ \"vi": {"and": "V\\%u00e0\\>", "background": "B\\%u1ed1i c\\%u1ea3nh\\>", "but": "Nh\\%u01b0ng\\>", "examples": "D\\%u1eef li\\%u1ec7u\\>", "feature": "T\\%u00ednh n\\%u0103ng\\>", "given": "Bi\\%u1ebft\\>\\|Cho\\>", "scenario": "T\\%u00ecnh hu\\%u1ed1ng\\>\\|K\\%u1ecbch b\\%u1ea3n\\>", "scenario_outline": "Khung t\\%u00ecnh hu\\%u1ed1ng\\>\\|Khung k\\%u1ecbch b\\%u1ea3n\\>", "then": "Th\\%u00ec\\>", "when": "Khi\\>"}, ++ \"zh-CN": {"and": "\\%u800c\\%u4e14", "background": "\\%u80cc\\%u666f\\>", "but": "\\%u4f46\\%u662f", "examples": "\\%u4f8b\\%u5b50\\>", "feature": "\\%u529f\\%u80fd\\>", "given": "\\%u5047\\%u5982", "scenario": "\\%u573a\\%u666f\\>", "scenario_outline": "\\%u573a\\%u666f\\%u5927\\%u7eb2\\>", "then": "\\%u90a3\\%u4e48", "when": "\\%u5f53"}, ++ \"zh-TW": {"and": "\\%u800c\\%u4e14\\|\\%u4e26\\%u4e14", "background": "\\%u80cc\\%u666f\\>", "but": "\\%u4f46\\%u662f", "examples": "\\%u4f8b\\%u5b50\\>", "feature": "\\%u529f\\%u80fd\\>", "given": "\\%u5047\\%u8a2d", "scenario": "\\%u5834\\%u666f\\>\\|\\%u5287\\%u672c\\>", "scenario_outline": "\\%u5834\\%u666f\\%u5927\\%u7db1\\>\\|\\%u5287\\%u672c\\%u5927\\%u7db1\\>", "then": "\\%u90a3\\%u9ebc", "when": "\\%u7576"}} ++ ++function! s:pattern(key) ++ let language = matchstr(getline(1),'#\s*language:\s*\zs\S\+') ++ if has_key(g:cucumber_languages, language) ++ let languages = [g:cucumber_languages[language]] ++ else ++ let languages = values(g:cucumber_languages) ++ end ++ return '\<\%('.join(map(languages,'get(v:val,a:key,"\\%(a\\&b\\)")'),'\|').'\)' ++endfunction ++ ++function! s:Add(name) ++ let next = " skipempty skipwhite nextgroup=".join(map(["Region","AndRegion","ButRegion","Comment","Table"],'"cucumber".a:name.v:val'),",") ++ exe "syn region cucumber".a:name.'Region matchgroup=cucumber'.a:name.' start="\%(^\s*\)\@<=\%('.s:pattern(tolower(a:name)).'\)" end="$"'.next ++ exe 'syn region cucumber'.a:name.'AndRegion matchgroup=cucumber'.a:name.'And start="\%(^\s*\)\@<='.s:pattern('and').'" end="$" contained'.next ++ exe 'syn region cucumber'.a:name.'ButRegion matchgroup=cucumber'.a:name.'But start="\%(^\s*\)\@<='.s:pattern('but').'" end="$" contained'.next ++ exe 'syn match cucumber'.a:name.'Comment "\%(^\s*\)\@<=#.*" contained'.next ++ exe 'syn match cucumber'.a:name.'Table "\%(^\s*\)\@<=|.*" contained contains=cucumberDelimiter'.next ++ exe 'hi def link cucumber'.a:name.'Comment cucumberComment' ++ exe 'hi def link cucumber'.a:name.'But cucumber'.a:name.'And' ++ exe 'hi def link cucumber'.a:name.'And cucumber'.a:name ++ exe 'syn cluster cucumberStepRegions add=cucumber'.a:name.'Region,cucumber'.a:name.'AndRegion,cucumber'.a:name.'ButRegion' ++endfunction ++ ++syn match cucumberComment "\%(^\s*\)\@<=#.*" ++syn match cucumberComment "\%(\%^\s*\)\@<=#.*" contains=cucumberLanguage ++syn match cucumberLanguage "\%(#\s*\)\@<=language:" contained ++syn match cucumberUnparsed "\S.*" nextgroup=cucumberUnparsedComment,cucumberUnparsed,cucumberTags,cucumberBackground,cucumberScenario,cucumberScenarioOutline,cucumberExamples skipwhite skipempty contained ++syn match cucumberUnparsedComment "#.*" nextgroup=cucumberUnparsedComment,cucumberUnparsed,cucumberTags,cucumberBackground,cucumberScenario,cucumberScenarioOutline,cucumberExamples skipwhite skipempty contained ++ ++exe 'syn match cucumberFeature "\%(^\s*\)\@<='.s:pattern('feature').':" nextgroup=cucumberUnparsedComment,cucumberUnparsed,cucumberBackground,cucumberScenario,cucumberScenarioOutline,cucumberExamples skipwhite skipempty' ++exe 'syn match cucumberBackground "\%(^\s*\)\@<='.s:pattern('background').':"' ++exe 'syn match cucumberScenario "\%(^\s*\)\@<='.s:pattern('scenario').':"' ++exe 'syn match cucumberScenarioOutline "\%(^\s*\)\@<='.s:pattern('scenario_outline').':"' ++exe 'syn match cucumberExamples "\%(^\s*\)\@<='.s:pattern('examples').':" nextgroup=cucumberExampleTable skipempty skipwhite' ++ ++syn match cucumberPlaceholder "<[^<>]*>" contained containedin=@cucumberStepRegions ++syn match cucumberExampleTable "\%(^\s*\)\@<=|.*" contains=cucumberDelimiter ++syn match cucumberDelimiter "|" contained ++syn match cucumberTags "\%(^\s*\)\@<=\%(@[^@[:space:]]\+\s\+\)*@[^@[:space:]]\+\s*$" ++syn region cucumberString start=+\%(^\s*\)\@<="""+ end=+"""+ ++ ++call s:Add('Then') ++call s:Add('When') ++call s:Add('Given') ++ ++hi def link cucumberUnparsedComment cucumberComment ++hi def link cucumberComment Comment ++hi def link cucumberLanguage SpecialComment ++hi def link cucumberFeature Macro ++hi def link cucumberBackground Define ++hi def link cucumberScenario Define ++hi def link cucumberScenarioOutline Define ++hi def link cucumberExamples Define ++hi def link cucumberPlaceholder Constant ++hi def link cucumberDelimiter Delimiter ++hi def link cucumberTags Tag ++hi def link cucumberString String ++hi def link cucumberGiven Conditional ++hi def link cucumberWhen Function ++hi def link cucumberThen Type ++ ++let b:current_syntax = "cucumber" ++ ++" vim:set sts=2 sw=2: +diff -u -r --new-file runtime/syntax.orig/d.vim runtime/syntax/d.vim +--- runtime/syntax.orig/d.vim 2006-04-30 11:01:36.000000000 -0500 ++++ runtime/syntax/d.vim 2010-01-16 07:33:01.000000000 -0600 +@@ -1,29 +1,44 @@ +-" Vim syntax file for the D programming language (version 0.149). ++" Vim syntax file for the D programming language (version 1.053 and 2.039). + " + " Language: D +-" Maintainer: Jason Mills<jmills@cs.mun.ca> +-" When emailing me, please put the word vim somewhere in the subject +-" to ensure the email does not get marked as spam. +-" Last Change: 2006 Apr 30 +-" Version: 0.15 ++" Maintainer: Jason Mills<jasonmills@nf.sympatico.ca> ++" Last Change: 2010 Jan 07 ++" Version: 0.18 ++" ++" Contributors: ++" - Kirk McDonald: version 0.17 updates, with minor modifications ++" (http://paste.dprogramming.com/dplmb7qx?view=hidelines) ++" - Jesse K. Phillips: patch for some keywords and attributes (annotations), with modifications ++" - Tim Keating: patch to fix a bug in highlighting the `\` literal ++" - Frank Benoit: Fixed a bug that caused some identifiers and numbers to highlight as octal number errors. ++" ++" Please email me with bugs, comments, and suggestions. + " + " Options: +-" d_comment_strings - set to highlight strings and numbers in comments ++" d_comment_strings - Set to highlight strings and numbers in comments. + " +-" d_hl_operator_overload - set to highlight D's specially named functions +-" that when overloaded implement unary and binary operators (e.g. cmp). ++" d_hl_operator_overload - Set to highlight D's specially named functions ++" that when overloaded implement unary and binary operators (e.g. opCmp). + " + " Todo: +-" - Must determine a better method of sync'ing than simply setting minlines +-" to a large number for /+ +/. ++" - Determine a better method of sync'ing than simply setting minlines ++" to a large number. + " +-" - Several keywords (namely, in and out) are both storage class and +-" statements, depending on their context. Must use some matching to figure +-" out which and highlight appropriately. For now I have made such keywords +-" statements. ++" - Several keywords (e.g., in, out, inout) are both storage class and ++" statements, depending on their context. Perhaps use pattern matching to ++" figure out which and highlight appropriately. For now I have made such ++" keywords storage classes so their highlighting is consistent with other ++" keywords that are commonly used with them, but are true storage classes, ++" such as lazy. Similarly, I made some statement keywords (e.g. body) storage ++" classes. + " + " - Mark contents of the asm statement body as special + " ++" - Maybe highlight the 'exit', 'failure', and 'success' parts of the ++" scope() statement. ++" ++" - Highlighting DDoc comments. ++" + + " Quit when a syntax file was already loaded + if exists("b:current_syntax") +@@ -33,46 +48,59 @@ + " Keyword definitions + " + syn keyword dExternal import package module extern +-syn keyword dConditional if else switch iftype ++syn keyword dConditional if else switch + syn keyword dBranch goto break continue +-syn keyword dRepeat while for do foreach ++syn keyword dRepeat while for do foreach foreach_reverse + syn keyword dBoolean true false + syn keyword dConstant null +-syn keyword dConstant __FILE__ __LINE__ __DATE__ __TIME__ __TIMESTAMP__ ++syn keyword dConstant __FILE__ __LINE__ __EOF__ __VERSION__ ++syn keyword dConstant __DATE__ __TIME__ __TIMESTAMP__ __VENDOR__ ++ + syn keyword dTypedef alias typedef +-syn keyword dStructure template interface class enum struct union ++syn keyword dStructure template interface class struct union ++syn keyword dEnum enum + syn keyword dOperator new delete typeof typeid cast align is + syn keyword dOperator this super + if exists("d_hl_operator_overload") + syn keyword dOpOverload opNeg opCom opPostInc opPostDec opCast opAdd opSub opSub_r + syn keyword dOpOverload opMul opDiv opDiv_r opMod opMod_r opAnd opOr opXor + syn keyword dOpOverload opShl opShl_r opShr opShr_r opUShr opUShr_r opCat +- syn keyword dOpOverload opCat_r opEquals opEquals opCmp opCmp opCmp opCmp +- syn keyword dOpOverload opAddAssign opSubAssign opMulAssign opDivAssign ++ syn keyword dOpOverload opCat_r opEquals opEquals opCmp ++ syn keyword dOpOverload opAssign opAddAssign opSubAssign opMulAssign opDivAssign + syn keyword dOpOverload opModAssign opAndAssign opOrAssign opXorAssign + syn keyword dOpOverload opShlAssign opShrAssign opUShrAssign opCatAssign + syn keyword dOpOverload opIndex opIndexAssign opCall opSlice opSliceAssign opPos +- syn keyword dOpOverload opAdd_r opMul_r opAnd_r opOr_r opXor_r ++ syn keyword dOpOverload opAdd_r opMul_r opAnd_r opOr_r opXor_r opIn opIn_r ++ syn keyword dOpOverload opPow opDispatch opStar opDot opApply opApplyReverse + endif + syn keyword dType ushort int uint long ulong float + syn keyword dType void byte ubyte double bit char wchar ucent cent +-syn keyword dType short bool dchar ++syn keyword dType short bool dchar string wstring dstring + syn keyword dType real ireal ifloat idouble creal cfloat cdouble + syn keyword dDebug deprecated unittest + syn keyword dExceptions throw try catch finally + syn keyword dScopeDecl public protected private export +-syn keyword dStatement version debug return with invariant body scope +-syn keyword dStatement in out inout asm mixin +-syn keyword dStatement function delegate +-syn keyword dStorageClass auto static override final const abstract volatile +-syn keyword dStorageClass synchronized ++syn keyword dStatement version debug return with ++syn keyword dStatement function delegate __traits asm mixin macro ++syn keyword dStorageClass in out inout ref lazy scope body ++syn keyword dStorageClass pure nothrow ++syn keyword dStorageClass auto static override final abstract volatile __gshared __thread ++syn keyword dStorageClass synchronized immutable shared const invariant lazy + syn keyword dPragma pragma + ++" Attributes/annotations ++syn match dAnnotation "@[_$a-zA-Z][_$a-zA-Z0-9_]*\>" + + " Assert is a statement and a module name. + syn match dAssert "^assert\>" + syn match dAssert "[^.]\s*\<assert\>"ms=s+1 + ++" dTokens is used by the token string highlighting ++syn cluster dTokens contains=dExternal,dConditional,dBranch,dRepeat,dBoolean ++syn cluster dTokens add=dConstant,dTypedef,dStructure,dOperator,dOpOverload ++syn cluster dTokens add=dType,dDebug,dExceptions,dScopeDecl,dStatement ++syn cluster dTokens add=dStorageClass,dPragma,dAssert,dAnnotation ++ + " Marks contents of the asm statment body as special + " + " TODO +@@ -85,12 +113,14 @@ + " Labels + " + " We contain dScopeDecl so public: private: etc. are not highlighted like labels +-syn match dUserLabel "^\s*[_$a-zA-Z][_$a-zA-Z0-9_]*\s*:"he=e-1 contains=dLabel,dScopeDecl ++syn match dUserLabel "^\s*[_$a-zA-Z][_$a-zA-Z0-9_]*\s*:"he=e-1 contains=dLabel,dScopeDecl,dEnum + syn keyword dLabel case default + ++syn cluster dTokens add=dUserLabel,dLabel ++ + " Comments + " +-syn keyword dTodo contained TODO FIXME TEMP XXX ++syn keyword dTodo contained TODO FIXME TEMP REFACTOR REVIEW HACK BUG XXX + syn match dCommentStar contained "^\s*\*[^/]"me=e-1 + syn match dCommentStar contained "^\s*\*$" + syn match dCommentPlus contained "^\s*+[^/]"me=e-1 +@@ -114,6 +144,8 @@ + hi link dCommentStar dBlockComment + hi link dCommentPlus dNestedComment + ++syn cluster dTokens add=dBlockComment,dNestedComment,dLineComment ++ + " /+ +/ style comments and strings that span multiple lines can cause + " problems. To play it safe, set minlines to a large number. + syn sync minlines=200 +@@ -125,24 +157,55 @@ + syn match dSpecialCharError contained "[^']" + + " Escape sequences (oct,specal char,hex,wchar, character entities \&xxx;) +-" These are not contained because they are considered string litterals ++" These are not contained because they are considered string literals. + syn match dEscSequence "\\\(\o\{1,3}\|[\"\\'\\?ntbrfva]\|u\x\{4}\|U\x\{8}\|x\x\x\)" +-syn match dEscSequence "\\&[^;& \t]\+;" ++syn match dEscSequence "\\&[^;& \t]\+;" + syn match dCharacter "'[^']*'" contains=dEscSequence,dSpecialCharError + syn match dCharacter "'\\''" contains=dEscSequence + syn match dCharacter "'[^\\]'" + ++syn cluster dTokens add=dEscSequence,dCharacter ++ + " Unicode characters + " + syn match dUnicode "\\u\d\{4\}" + +- + " String. + " +-syn region dString start=+"+ end=+"[cwd]\=+ contains=dEscSequence,@Spell +-syn region dRawString start=+`+ skip=+\\`+ end=+`[cwd]\=+ contains=@Spell +-syn region dRawString start=+r"+ skip=+\\"+ end=+"[cwd]\=+ contains=@Spell +-syn region dHexString start=+x"+ skip=+\\"+ end=+"[cwd]\=+ contains=@Spell ++syn region dString start=+"+ end=+"[cwd]\=+ skip=+\\\\\|\\"+ contains=dEscSequence,@Spell ++syn region dRawString start=+`+ end=+`[cwd]\=+ contains=@Spell ++syn region dRawString start=+r"+ end=+"[cwd]\=+ contains=@Spell ++syn region dHexString start=+x"+ end=+"[cwd]\=+ contains=@Spell ++syn region dDelimString start=+q"\z(.\)+ end=+\z1"+ contains=@Spell ++syn region dHereString start=+q"\z(\I\i*\)\n+ end=+\n\z1"+ contains=@Spell ++ ++" Nesting delimited string contents ++" ++syn region dNestParenString start=+(+ end=+)+ contained transparent contains=dNestParenString,@Spell ++syn region dNestBrackString start=+\[+ end=+\]+ contained transparent contains=dNestBrackString,@Spell ++syn region dNestAngleString start=+<+ end=+>+ contained transparent contains=dNestAngleString,@Spell ++syn region dNestCurlyString start=+{+ end=+}+ contained transparent contains=dNestCurlyString,@Spell ++ ++" Nesting delimited strings ++" ++syn region dParenString matchgroup=dParenString start=+q"(+ end=+)"+ contains=dNestParenString,@Spell ++syn region dBrackString matchgroup=dBrackString start=+q"\[+ end=+\]"+ contains=dNestBrackString,@Spell ++syn region dAngleString matchgroup=dAngleString start=+q"<+ end=+>"+ contains=dNestAngleString,@Spell ++syn region dCurlyString matchgroup=dCurlyString start=+q"{+ end=+}"+ contains=dNestCurlyString,@Spell ++ ++hi link dParenString dNestString ++hi link dBrackString dNestString ++hi link dAngleString dNestString ++hi link dCurlyString dNestString ++ ++syn cluster dTokens add=dString,dRawString,dHexString,dDelimString,dNestString ++ ++" Token strings ++" ++syn region dNestTokenString start=+{+ end=+}+ contained contains=dNestTokenString,@dTokens ++syn region dTokenString matchgroup=dTokenStringBrack transparent start=+q{+ end=+}+ contains=dNestTokenString,@dTokens ++ ++syn cluster dTokens add=dTokenString + + " Numbers + " +@@ -177,6 +240,8 @@ + "floating point number, without dot, with exponent + syn match dHexFloat display "\<0x[0-9a-f_]\+p[-+]\=[0-9_]\+[fl]\=i\=\>" + ++syn cluster dTokens add=dDec,dHex,dOctal,dOctalError,dBinary,dFloat,dHexFloat ++ + syn case match + + " Pragma (preprocessor) support +@@ -205,6 +270,10 @@ + hi def link dStorageClass StorageClass + hi def link dBoolean Boolean + hi def link dUnicode Special ++hi def link dTokenStringBrack String ++hi def link dHereString String ++hi def link dNestString String ++hi def link dDelimString String + hi def link dRawString String + hi def link dString String + hi def link dHexString String +@@ -213,9 +282,10 @@ + hi def link dSpecialCharError Error + hi def link dOctalError Error + hi def link dOperator Operator +-hi def link dOpOverload Operator ++hi def link dOpOverload Identifier + hi def link dConstant Constant + hi def link dTypedef Typedef ++hi def link dEnum Structure + hi def link dStructure Structure + hi def link dTodo Todo + hi def link dType Type +@@ -224,7 +294,8 @@ + hi def link dNestedComment Comment + hi def link dExternal Include + hi def link dPragma PreProc ++hi def link dAnnotation PreProc + + let b:current_syntax = "d" +- ++ + " vim: ts=8 noet +diff -u -r --new-file runtime/syntax.orig/debchangelog.vim runtime/syntax/debchangelog.vim +--- runtime/syntax.orig/debchangelog.vim 2008-07-06 12:51:40.000000000 -0500 ++++ runtime/syntax/debchangelog.vim 2009-09-18 05:28:22.000000000 -0500 +@@ -3,7 +3,7 @@ + " Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org> + " Former Maintainers: Gerfried Fuchs <alfie@ist.org> + " Wichert Akkerman <wakkerma@debian.org> +-" Last Change: 2008-01-16 ++" Last Change: 2009 Jun 05 + " URL: http://git.debian.org/?p=pkg-vim/vim.git;a=blob_plain;f=runtime/syntax/debchangelog.vim;hb=debian + + " Standard syntax initialization +@@ -17,9 +17,9 @@ + syn case ignore + + " Define some common expressions we can use later on +-syn match debchangelogName contained "^[[:alpha:]][[:alnum:].+-]\+ " ++syn match debchangelogName contained "^[[:alnum:]][[:alnum:].+-]\+ " + syn match debchangelogUrgency contained "; urgency=\(low\|medium\|high\|critical\|emergency\)\( \S.*\)\=" +-syn match debchangelogTarget contained "\v %(%(old)=stable|frozen|unstable|%(testing-|%(old)=stable-)=proposed-updates|experimental|%(sarge|etch|lenny)-%(backports|volatile)|%(testing|%(old)=stable)-security|%(dapper|feisty|gutsy|hardy|intrepid)%(-%(security|proposed|updates|backports|commercial|partner))=)+" ++syn match debchangelogTarget contained "\v %(frozen|unstable|%(testing|%(old)=stable)%(-proposed-updates|-security)=|experimental|%(etch|lenny)-%(backports|volatile)|%(dapper|hardy|intrepid|jaunty|karmic)%(-%(security|proposed|updates|backports|commercial|partner))=)+" + syn match debchangelogVersion contained "(.\{-})" + syn match debchangelogCloses contained "closes:\_s*\(bug\)\=#\=\_s\=\d\+\(,\_s*\(bug\)\=#\=\_s\=\d\+\)*" + syn match debchangelogLP contained "\clp:\s\+#\d\+\(,\s*#\d\+\)*" +diff -u -r --new-file runtime/syntax.orig/debcontrol.vim runtime/syntax/debcontrol.vim +--- runtime/syntax.orig/debcontrol.vim 2008-07-06 12:51:40.000000000 -0500 ++++ runtime/syntax/debcontrol.vim 2009-09-18 05:30:48.000000000 -0500 +@@ -3,7 +3,7 @@ + " Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org> + " Former Maintainers: Gerfried Fuchs <alfie@ist.org> + " Wichert Akkerman <wakkerma@debian.org> +-" Last Change: 2008-02-23 ++" Last Change: 2009 July 14 + " URL: http://git.debian.org/?p=pkg-vim/vim.git;a=blob_plain;f=runtime/ftplugin/debcontrol.vim;hb=debian + + " Comments are very welcome - but please make sure that you are commenting on +@@ -28,10 +28,10 @@ + syn match debControlSpace " " + + " Define some common expressions we can use later on +-syn match debcontrolArchitecture contained "\(all\|any\|alpha\|amd64\|arm\(e[bl]\)\=\|hppa\|i386\|ia64\|m32r\|m68k\|mipsel\|mips\|powerpc\|ppc64\|s390x\=\|sh[34]\(eb\)\=\|sh\|sparc64\|sparc\|hurd-i386\|kfreebsd-\(i386\|gnu\)\|knetbsd-i386\|netbsd-\(alpha\|i386\)\)" ++syn match debcontrolArchitecture contained "\(all\|any\|alpha\|amd64\|arm\(e[bl]\)\=\|avr32\|hppa\|i386\|ia64\|m32r\|m68k\|mipsel\|mips\|powerpc\|ppc64\|s390x\=\|sh[34]\(eb\)\=\|sh\|sparc64\|sparc\|hurd-i386\|kfreebsd-\(i386\|amd64\|gnu\)\|knetbsd-i386\|netbsd-\(alpha\|i386\)\)" + syn match debcontrolName contained "[a-z0-9][a-z0-9+.-]\+" + syn match debcontrolPriority contained "\(extra\|important\|optional\|required\|standard\)" +-syn match debcontrolSection contained "\(\(contrib\|non-free\|non-US/main\|non-US/contrib\|non-US/non-free\|restricted\|universe\|multiverse\)/\)\=\(admin\|base\|comm\|devel\|doc\|editors\|electronics\|embedded\|games\|gnome\|graphics\|hamradio\|interpreters\|kde\|libs\|libdevel\|mail\|math\|misc\|net\|news\|oldlibs\|otherosfs\|perl\|python\|science\|shells\|sound\|text\|tex\|utils\|web\|x11\|debian-installer\)" ++syn match debcontrolSection contained "\v((contrib|non-free|non-US/main|non-US/contrib|non-US/non-free|restricted|universe|multiverse)/)?(admin|cli-mono|comm|database|debian-installer|debug|devel|doc|editors|electronics|embedded|fonts|games|gnome|gnustep|gnu-r|graphics|hamradio|haskell|httpd|interpreters|java|kde|kernel|libs|libdevel|lisp|localization|mail|math|misc|net|news|ocaml|oldlibs|otherosfs|perl|php|python|ruby|science|shells|sound|text|tex|utils|vcs|video|web|x11|xfce|zope)" + syn match debcontrolPackageType contained "u\?deb" + syn match debcontrolVariable contained "\${.\{-}}" + syn match debcontrolDmUpload contained "\cyes" +@@ -41,7 +41,7 @@ + syn match debcontrolHTTPUrl contained "\vhttps?://[[:alnum:]][-[:alnum:]]*[[:alnum:]]?(\.[[:alnum:]][-[:alnum:]]*[[:alnum:]]?)*\.[[:alpha:]][-[:alnum:]]*[[:alpha:]]?(:\d+)?(/[^[:space:]]*)?$" + syn match debcontrolVcsSvn contained "\vsvn%(\+ssh)?://[[:alnum:]][-[:alnum:]]*[[:alnum:]]?(\.[[:alnum:]][-[:alnum:]]*[[:alnum:]]?)*\.[[:alpha:]][-[:alnum:]]*[[:alpha:]]?(:\d+)?(/[^[:space:]]*)?$" + syn match debcontrolVcsCvs contained "\v%(\-d *)?:pserver:[^@]+\@[[:alnum:]][-[:alnum:]]*[[:alnum:]]?(\.[[:alnum:]][-[:alnum:]]*[[:alnum:]]?)*\.[[:alpha:]][-[:alnum:]]*[[:alpha:]]?:/[^[:space:]]*%( [^[:space:]]+)?$" +-syn match debcontrolVcsGit contained "\vgit://[[:alnum:]][-[:alnum:]]*[[:alnum:]]?(\.[[:alnum:]][-[:alnum:]]*[[:alnum:]]?)*\.[[:alpha:]][-[:alnum:]]*[[:alpha:]]?(:\d+)?(/[^[:space:]]*)?$" ++syn match debcontrolVcsGit contained "\v%(git|http)://[[:alnum:]][-[:alnum:]]*[[:alnum:]]?(\.[[:alnum:]][-[:alnum:]]*[[:alnum:]]?)*\.[[:alpha:]][-[:alnum:]]*[[:alpha:]]?(:\d+)?(/[^[:space:]]*)?$" + + " An email address + syn match debcontrolEmail "[_=[:alnum:]\.+-]\+@[[:alnum:]\./\-]\+" +@@ -53,7 +53,7 @@ + syn case ignore + + " List of all legal keys +-syn match debcontrolKey contained "^\(Source\|Package\|Section\|Priority\|Maintainer\|Uploaders\|Build-Depends\|Build-Conflicts\|Build-Depends-Indep\|Build-Conflicts-Indep\|Standards-Version\|Pre-Depends\|Depends\|Recommends\|Suggests\|Provides\|Replaces\|Conflicts\|Essential\|Architecture\|Description\|Bugs\|Origin\|Enhances\|Homepage\|\(XS-\)\=Vcs-\(Browser\|Arch\|Bzr\|Cvs\|Darcs\|Git\|Hg\|Mtn\|Svn\)\|XC-Package-Type\|\%(XS-\)\=DM-Upload-Allowed\): *" ++syn match debcontrolKey contained "^\%(Source\|Package\|Section\|Priority\|\%(XSBC-Original-\)\=Maintainer\|Uploaders\|Build-\%(Conflicts\|Depends\)\%(-Indep\)\=\|Standards-Version\|\%(Pre-\)\=Depends\|Recommends\|Suggests\|Provides\|Replaces\|Conflicts\|Enhances\|Essential\|Architecture\|Description\|Bugs\|Origin\|X[SB]-Python-Version\|Homepage\|\(XS-\)\=Vcs-\(Browser\|Arch\|Bzr\|Cvs\|Darcs\|Git\|Hg\|Mtn\|Svn\)\|XC-Package-Type\|\%(XS-\)\=DM-Upload-Allowed\): *" + + " Fields for which we do strict syntax checking + syn region debcontrolStrictField start="^Architecture" end="$" contains=debcontrolKey,debcontrolArchitecture,debcontrolSpace oneline +@@ -62,15 +62,15 @@ + syn region debcontrolStrictField start="^Section" end="$" contains=debcontrolKey,debcontrolSection oneline + syn region debcontrolStrictField start="^XC-Package-Type" end="$" contains=debcontrolKey,debcontrolPackageType oneline + syn region debcontrolStrictField start="^Homepage" end="$" contains=debcontrolKey,debcontrolHTTPUrl oneline keepend +-syn region debcontrolStrictField start="^\%(XS-\)\?Vcs-\%(Browser\|Arch\|Bzr\|Darcs\|Hg\)" end="$" contains=debcontrolKey,debcontrolHTTPUrl oneline keepend +-syn region debcontrolStrictField start="^\%(XS-\)\?Vcs-Svn" end="$" contains=debcontrolKey,debcontrolVcsSvn,debcontrolHTTPUrl oneline keepend +-syn region debcontrolStrictField start="^\%(XS-\)\?Vcs-Cvs" end="$" contains=debcontrolKey,debcontrolVcsCvs oneline keepend +-syn region debcontrolStrictField start="^\%(XS-\)\?Vcs-Git" end="$" contains=debcontrolKey,debcontrolVcsGit oneline keepend +-syn region debcontrolStrictField start="^\%(XS-\)\?DM-Upload-Allowed" end="$" contains=debcontrolKey,debcontrolDmUpload oneline ++syn region debcontrolStrictField start="^\%(XS-\)\=Vcs-\%(Browser\|Arch\|Bzr\|Darcs\|Hg\)" end="$" contains=debcontrolKey,debcontrolHTTPUrl oneline keepend ++syn region debcontrolStrictField start="^\%(XS-\)\=Vcs-Svn" end="$" contains=debcontrolKey,debcontrolVcsSvn,debcontrolHTTPUrl oneline keepend ++syn region debcontrolStrictField start="^\%(XS-\)\=Vcs-Cvs" end="$" contains=debcontrolKey,debcontrolVcsCvs oneline keepend ++syn region debcontrolStrictField start="^\%(XS-\)\=Vcs-Git" end="$" contains=debcontrolKey,debcontrolVcsGit oneline keepend ++syn region debcontrolStrictField start="^\%(XS-\)\=DM-Upload-Allowed" end="$" contains=debcontrolKey,debcontrolDmUpload oneline + + " Catch-all for the other legal fields +-syn region debcontrolField start="^\(Maintainer\|Standards-Version\|Essential\|Bugs\|Origin\|X\(S\|B\)-Python-Version\|XSBC-Original-Maintainer\|\(XS-\)\?Vcs-Mtn\):" end="$" contains=debcontrolKey,debcontrolVariable,debcontrolEmail oneline +-syn region debcontrolMultiField start="^\(Build-\(Conflicts\|Depends\)\(-Indep\)\=\|\(Pre-\)\=Depends\|Recommends\|Suggests\|Provides\|Replaces\|Conflicts\|Enhances\|Uploaders\|Description\):" skip="^ " end="^$"me=s-1 end="^[^ ]"me=s-1 contains=debcontrolKey,debcontrolEmail,debcontrolVariable ++syn region debcontrolField start="^\%(\%(XSBC-Original-\)\=Maintainer\|Standards-Version\|Essential\|Bugs\|Origin\|X[SB]-Python-Version\|\%(XS-\)\=Vcs-Mtn\):" end="$" contains=debcontrolKey,debcontrolVariable,debcontrolEmail oneline ++syn region debcontrolMultiField start="^\%(Build-\%(Conflicts\|Depends\)\%(-Indep\)\=\|\%(Pre-\)\=Depends\|Recommends\|Suggests\|Provides\|Replaces\|Conflicts\|Enhances\|Uploaders\|Description\):" skip="^ " end="^$"me=s-1 end="^[^ #]"me=s-1 contains=debcontrolKey,debcontrolEmail,debcontrolVariable,debcontrolComment + + " Associate our matches and regions with pretty colours + if version >= 508 || !exists("did_debcontrol_syn_inits") +diff -u -r --new-file runtime/syntax.orig/debsources.vim runtime/syntax/debsources.vim +--- runtime/syntax.orig/debsources.vim 2008-07-06 12:51:40.000000000 -0500 ++++ runtime/syntax/debsources.vim 2009-09-18 05:28:22.000000000 -0500 +@@ -2,7 +2,7 @@ + " Language: Debian sources.list + " Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org> + " Former Maintainer: Matthijs Mohlmann <matthijs@cacholong.nl> +-" Last Change: 2008-04-25 ++" Last Change: 2009 Apr 17 + " URL: http://git.debian.org/?p=pkg-vim/vim.git;a=blob_plain;f=runtime/syntax/debsources.vim;hb=debian + + " Standard syntax initialization +@@ -19,11 +19,11 @@ + syn match debsourcesKeyword /\(deb-src\|deb\|main\|contrib\|non-free\|restricted\|universe\|multiverse\)/ + + " Match comments +-syn match debsourcesComment /#.*/ ++syn match debsourcesComment /#.*/ contains=@Spell + + " Match uri's + syn match debsourcesUri +\(http://\|ftp://\|[rs]sh://\|debtorrent://\|\(cdrom\|copy\|file\):\)[^' <>"]\++ +-syn match debsourcesDistrKeyword +\([[:alnum:]_./]*\)\(sarge\|etch\|lenny\|\(old\)\=stable\|testing\|unstable\|sid\|experimental\|dapper\|feisty\|gutsy\|hardy\|intrepid\)\([-[:alnum:]_./]*\)+ ++syn match debsourcesDistrKeyword +\([[:alnum:]_./]*\)\(etch\|lenny\|squeeze\|\(old\)\=stable\|testing\|unstable\|sid\|experimental\|dapper\|hardy\|intrepid\|jaunty\|karmic\)\([-[:alnum:]_./]*\)+ + + " Associate our matches and regions with pretty colours + hi def link debsourcesLine Error +diff -u -r --new-file runtime/syntax.orig/django.vim runtime/syntax/django.vim +--- runtime/syntax.orig/django.vim 2007-05-06 05:32:18.000000000 -0500 ++++ runtime/syntax/django.vim 2009-01-14 14:15:05.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: Django template + " Maintainer: Dave Hodder <dmh@dmh.org.uk> +-" Last Change: 2007 Apr 21 ++" Last Change: 2008 Dec 18 + + " For version 5.x: Clear all syntax items + " For version 6.x: Quit when a syntax file was already loaded +@@ -18,8 +18,9 @@ + + " Django template built-in tags and parameters + " 'comment' doesn't appear here because it gets special treatment ++syn keyword djangoStatement contained autoescape on off endautoescape + syn keyword djangoStatement contained and as block endblock by cycle debug else +-syn keyword djangoStatement contained extends filter endfilter firstof for ++syn keyword djangoStatement contained extends filter endfilter firstof for empty + syn keyword djangoStatement contained endfor if endif ifchanged endifchanged + syn keyword djangoStatement contained ifequal endifequal ifnotequal + syn keyword djangoStatement contained endifnotequal in include load not now or +@@ -35,15 +36,15 @@ + " Django templete built-in filters + syn keyword djangoFilter contained add addslashes capfirst center cut date + syn keyword djangoFilter contained default default_if_none dictsort +-syn keyword djangoFilter contained dictsortreversed divisibleby escape ++syn keyword djangoFilter contained dictsortreversed divisibleby escape escapejs + syn keyword djangoFilter contained filesizeformat first fix_ampersands +-syn keyword djangoFilter contained floatformat get_digit join length length_is ++syn keyword djangoFilter contained floatformat force_escape get_digit iriencode join last length length_is + syn keyword djangoFilter contained linebreaks linebreaksbr linenumbers ljust + syn keyword djangoFilter contained lower make_list phone2numeric pluralize +-syn keyword djangoFilter contained pprint random removetags rjust slice slugify ++syn keyword djangoFilter contained pprint random removetags rjust safe slice slugify + syn keyword djangoFilter contained stringformat striptags + syn keyword djangoFilter contained time timesince timeuntil title +-syn keyword djangoFilter contained truncatewords unordered_list upper urlencode ++syn keyword djangoFilter contained truncatewords truncatewords_html unordered_list upper urlencode + syn keyword djangoFilter contained urlize urlizetrunc wordcount wordwrap yesno + + " Keywords to highlight within comments +diff -u -r --new-file runtime/syntax.orig/dosbatch.vim runtime/syntax/dosbatch.vim +--- runtime/syntax.orig/dosbatch.vim 2008-05-10 15:38:38.000000000 -0500 ++++ runtime/syntax/dosbatch.vim 2009-09-18 05:28:22.000000000 -0500 +@@ -2,7 +2,7 @@ + " Language: MSDOS batch file (with NT command extensions) + " Maintainer: Mike Williams <mrw@eandem.co.uk> + " Filenames: *.bat +-" Last Change: 10th May 2008 ++" Last Change: 6th September 2009 + " Web Page: http://www.eandem.co.uk/mrw/vim + " + " Options Flags: +@@ -36,7 +36,7 @@ + syn case match + syn keyword dosbatchOperator EQU NEQ LSS LEQ GTR GEQ + syn case ignore +-syn match dosbatchOperator "\s[-+\*/%]\s" ++syn match dosbatchOperator "\s[-+\*/%!~]\s" + syn match dosbatchOperator "=" + syn match dosbatchOperator "[-+\*/%]=" + syn match dosbatchOperator "\s\(&\||\|^\|<<\|>>\)=\=\s" +@@ -51,10 +51,10 @@ + syn match dosbatchCmd "(\s*'[^']*'"lc=1 contains=dosbatchString,dosbatchVariable,dosBatchArgument,@dosbatchNumber,dosbatchImplicit,dosbatchStatement,dosbatchConditional,dosbatchRepeat,dosbatchOperator + + " Numbers - surround with ws to not include in dir and filenames +-syn match dosbatchInteger "[[:space:]=(/:]\d\+"lc=1 +-syn match dosbatchHex "[[:space:]=(/:]0x\x\+"lc=1 +-syn match dosbatchBinary "[[:space:]=(/:]0b[01]\+"lc=1 +-syn match dosbatchOctal "[[:space:]=(/:]0\o\+"lc=1 ++syn match dosbatchInteger "[[:space:]=(/:,!~-]\d\+"lc=1 ++syn match dosbatchHex "[[:space:]=(/:,!~-]0x\x\+"lc=1 ++syn match dosbatchBinary "[[:space:]=(/:,!~-]0b[01]\+"lc=1 ++syn match dosbatchOctal "[[:space:]=(/:,!~-]0\o\+"lc=1 + syn cluster dosbatchNumber contains=dosbatchInteger,dosbatchHex,dosbatchBinary,dosbatchOctal + + " Command line switches +@@ -69,15 +69,15 @@ + syn match dosbatchIdentifier contained "\s\h\w*\>" + syn match dosbatchVariable "%\h\w*%" + syn match dosbatchVariable "%\h\w*:\*\=[^=]*=[^%]*%" +-syn match dosbatchVariable "%\h\w*:\~\d\+,\d\+%" contains=dosbatchInteger ++syn match dosbatchVariable "%\h\w*:\~[-]\=\d\+\(,[-]\=\d\+\)\=%" contains=dosbatchInteger + syn match dosbatchVariable "!\h\w*!" +-syn match dosbatchVariable "!\h\w*:\*\=[^=]*=[^%]*!" +-syn match dosbatchVariable "!\h\w*:\~\d\+,\d\+!" contains=dosbatchInteger ++syn match dosbatchVariable "!\h\w*:\*\=[^=]*=[^!]*!" ++syn match dosbatchVariable "!\h\w*:\~[-]\=\d\+\(,[-]\=\d\+\)\=!" contains=dosbatchInteger + syn match dosbatchSet "\s\h\w*[+-]\==\{-1}" contains=dosbatchIdentifier,dosbatchOperator + + " Args to bat files and for loops, etc + syn match dosbatchArgument "%\(\d\|\*\)" +-syn match dosbatchArgument "%%[a-z]\>" ++syn match dosbatchArgument "%[a-z]\>" + if dosbatch_cmdextversion == 1 + syn match dosbatchArgument "%\~[fdpnxs]\+\(\($PATH:\)\=[a-z]\|\d\)\>" + else +@@ -92,7 +92,9 @@ + + " Comments - usual rem but also two colons as first non-space is an idiom + syn match dosbatchComment "^rem\($\|\s.*$\)"lc=3 contains=dosbatchTodo,dosbatchSpecialChar,@dosbatchNumber,dosbatchVariable,dosbatchArgument,@Spell ++syn match dosbatchComment "^@rem\($\|\s.*$\)"lc=4 contains=dosbatchTodo,@dosbatchNumber,dosbatchVariable,dosbatchArgument,@Spell + syn match dosbatchComment "\srem\($\|\s.*$\)"lc=4 contains=dosbatchTodo,dosbatchSpecialChar,@dosbatchNumber,dosbatchVariable,dosbatchArgument,@Spell ++syn match dosbatchComment "\s@rem\($\|\s.*$\)"lc=5 contains=dosbatchTodo,@dosbatchNumber,dosbatchVariable,dosbatchArgument,@Spell + syn match dosbatchComment "\s*:\s*:.*$" contains=dosbatchTodo,dosbatchSpecialChar,@dosbatchNumber,dosbatchVariable,dosbatchArgument,@Spell + + " Comments in ()'s - still to handle spaces before rem +diff -u -r --new-file runtime/syntax.orig/doxygen.vim runtime/syntax/doxygen.vim +--- runtime/syntax.orig/doxygen.vim 2008-07-22 13:41:00.000000000 -0500 ++++ runtime/syntax/doxygen.vim 2009-01-28 10:23:36.000000000 -0600 +@@ -2,8 +2,8 @@ + " Language: doxygen on top of c, cpp, idl, java, php + " Maintainer: Michael Geddes <vimmer@frog.wheelycreek.net> + " Author: Michael Geddes +-" Last Change: July 2008 +-" Version: 1.22 ++" Last Change: Jan 2009 ++" Version: 1.23 + " + " Copyright 2004-2008 Michael Geddes + " Please feel free to use, modify & distribute all or part of this script, +@@ -239,7 +239,7 @@ + " #Link hilighting. + syn match doxygenHashLink /\([a-zA-Z_][0-9a-zA-Z_]*\)\?#\(\.[0-9a-zA-Z_]\@=\|[a-zA-Z0-9_]\+\|::\|()\)\+/ contained contains=doxygenHashSpecial + syn match doxygenHashSpecial /#/ contained +- syn match doxygenHyperLink /\(\s\|^\s*\*\?\)\@<=\(http\|https\|ftp\):\/\/[-0-9a-zA-Z_?&=+#%/.!':;@]\+/ contained ++ syn match doxygenHyperLink /\(\s\|^\s*\*\?\)\@<=\(http\|https\|ftp\):\/\/[-0-9a-zA-Z_?&=+#%/.!':;@~]\+/ contained + + " Handle \page. This does not use doxygenBrief. + syn match doxygenPage "[\\@]page\>"me=s+1 contained skipwhite nextgroup=doxygenPagePage +diff -u -r --new-file runtime/syntax.orig/erlang.vim runtime/syntax/erlang.vim +--- runtime/syntax.orig/erlang.vim 2008-03-15 09:01:37.000000000 -0500 ++++ runtime/syntax/erlang.vim 2009-11-28 06:33:42.000000000 -0600 +@@ -50,7 +50,7 @@ + " Operators + syn match erlangOperator "+\|-\|\*\|\/" + syn keyword erlangOperator div rem or xor bor bxor bsl bsr +- syn keyword erlangOperator and band not bnot ++ syn keyword erlangOperator and band not bnot andalso orelse + syn match erlangOperator "==\|/=\|=:=\|=/=\|<\|=<\|>\|>=" + syn match erlangOperator "++\|--\|=\|!\|<-" + +@@ -123,7 +123,7 @@ + + if ! exists ("erlang_keywords") + " Constants and Directives +- syn match erlangDirective "-behaviour\|-behaviour" ++ syn match erlangDirective "-behaviour\|-behavior" + syn match erlangDirective "-compile\|-define\|-else\|-endif\|-export\|-file" + syn match erlangDirective "-ifdef\|-ifndef\|-import\|-include_lib\|-include" + syn match erlangDirective "-module\|-record\|-undef" +diff -u -r --new-file runtime/syntax.orig/form.vim runtime/syntax/form.vim +--- runtime/syntax.orig/form.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/form.vim 2009-12-16 14:38:20.000000000 -0600 +@@ -1,7 +1,10 @@ + " Vim syntax file + " Language: FORM ++" Version: 2.0 + " Maintainer: Michael M. Tung <michael.tung@uni-mainz.de> +-" Last Change: 2001 May 10 ++" Last Change: <Thu Oct 23 13:11:21 CEST 2008> ++" Past Change: <October 2008 Thomas Reiter thomasr@nikhef.nl> ++" Past Change: <Wed, 2005/05/25 09:24:58 arwagner wptx44> + + " First public release based on 'Symbolic Manipulation with FORM' + " by J.A.M. Vermaseren, CAN, Netherlands, 1991. +@@ -18,30 +21,73 @@ + + syn case ignore + +-" A bunch of useful FORM keywords ++" a bunch of useful FORM keywords + syn keyword formType global local + syn keyword formHeaderStatement symbol symbols cfunction cfunctions + syn keyword formHeaderStatement function functions vector vectors +-syn keyword formHeaderStatement set sets index indices ++syn keyword formHeaderStatement tensor tensors ctensor ctensors ++syn keyword formHeaderStatement set sets index indices table ctable + syn keyword formHeaderStatement dimension dimensions unittrace +-syn keyword formStatement id identify drop skip +-syn keyword formStatement write nwrite +-syn keyword formStatement format print nprint load save +-syn keyword formStatement bracket brackets +-syn keyword formStatement multiply count match only discard +-syn keyword formStatement trace4 traceN contract symmetrize antisymmetrize +-syn keyword formConditional if else endif while ++syn keyword formConditional if else elseif endif while + syn keyword formConditional repeat endrepeat label goto ++syn keyword formConditional argument endargument exit ++syn keyword formConditional inexpression inside term ++syn keyword formConditional endinexpression endinside endterm ++syn keyword formStatement abrackets also antibrackets antisymmetrize ++syn keyword formStatement argexplode argimplode apply auto autodeclare ++syn keyword formStatement brackets chainin chainout chisholm cleartable ++syn keyword formStatement collect commuting compress contract ++syn keyword formStatement cyclesymmetrize deallocatetable delete ++syn keyword formStatement dimension discard disorder drop factarg fill ++syn keyword formStatement fillexpression fixindex format funpowers hide ++syn keyword formStatement identify idnew idold ifmatch inparallel ++syn keyword formStatement insidefirst keep load makeinteger many metric ++syn keyword formStatement moduleoption modulus multi multiply ndrop ++syn keyword formStatement nfunctions nhide normalize notinparallel ++syn keyword formStatement nprint nskip ntable ntensors nunhide nwrite ++syn keyword formStatement off on once only polyfun pophide print ++syn keyword formStatement printtable propercount pushhide ratio ++syn keyword formStatement rcyclesymmetrize redefine renumber ++syn keyword formStatement replaceinarg replaceloop save select ++syn keyword formStatement setexitflag skip slavepatchsize sort splitarg ++syn keyword formStatement splitfirstarg splitlastarg sum symmetrize ++syn keyword formStatement tablebase testuse threadbucketsize totensor ++syn keyword formStatement tovector trace4 tracen tryreplace unhide ++syn keyword formStatement unittrace vectors write ++" for compatibility with older FORM versions: ++syn keyword formStatement id bracket count match traceN + + " some special functions +-syn keyword formStatement g_ gi_ g5_ g6_ g7_ 5_ 6_ 7_ +-syn keyword formStatement e_ d_ delta_ theta_ sum_ sump_ ++syn keyword formStatement abs_ bernoulli_ binom_ conjg_ count_ ++syn keyword formStatement d_ dd_ delta_ deltap_ denom_ distrib_ ++syn keyword formStatement dum_ dummy_ dummyten_ e_ exp_ fac_ ++syn keyword formStatement factorin_ firstbracket_ g5_ g6_ g7_ ++syn keyword formStatement g_ gcd_ gi_ integer_ invfac_ match_ ++syn keyword formStatement max_ maxpowerof_ min_ minpowerof_ ++syn keyword formStatement mod_ nargs_ nterms_ pattern_ poly_ ++syn keyword formStatement polyadd_ polydiv_ polygcd_ polyintfac_ ++syn keyword formStatement polymul_ polynorm_ polyrem_ polysub_ ++syn keyword formStatement replace_ reverse_ root_ setfun_ sig_ ++syn keyword formStatement sign_ sum_ sump_ table_ tbl_ term_ ++syn keyword formStatement termsin_ termsinbracket_ theta_ thetap_ ++syn keyword formStatement 5_ 6_ 7_ ++ ++syn keyword formReserved sqrt_ ln_ sin_ cos_ tan_ asin_ acos_ ++syn keyword formReserved atan_ atan2_ sinh_ cosh_ tanh_ asinh_ ++syn keyword formReserved acosh_ atanh_ li2_ lin_ ++ ++syn keyword formTodo contained TODO FIXME XXX ++ ++syn match formSpecial display contained "\\\(n\|t\|b\|\\\|\"\)" ++syn match formSpecial display contained "%\(%\|e\|E\|s\|f\|\$\)" ++syn match formSpecial "\<N\d\+_[?]" + + " pattern matching for keywords +-syn match formComment "^\ *\*.*$" +-syn match formComment "\;\ *\*.*$" +-syn region formString start=+"+ end=+"+ ++syn match formComment "^\ *\*.*$" contains=formTodo ++syn match formComment "\;\ *\*.*$" contains=formTodo ++syn region formString start=+"+ end=+"+ contains=formSpecial + syn region formString start=+'+ end=+'+ ++syn region formNestedString start=+`+ end=+'+ contains=formNestedString + syn match formPreProc "^\=\#[a-zA-z][a-zA-Z0-9]*\>" + syn match formNumber "\<\d\+\>" + syn match formNumber "\<\d\+\.\d*\>" +@@ -50,6 +96,13 @@ + syn match formNumber "-\.\d" contains=Number + syn match formNumber "i_\+\>" + syn match formNumber "fac_\+\>" ++" pattern matching wildcards ++syn match formNumber "?[A-z0-9]*" ++" dollar-variables (new in 3.x) ++syn match formNumber "\\$[A-z0-9]*" ++" scalar products ++syn match formNumber "^\=[a-zA-z][a-zA-Z0-9]*\.[a-zA-z][a-zA-Z0-9]*\>" ++ + syn match formDirective "^\=\.[a-zA-z][a-zA-Z0-9]*\>" + + " hi User Labels +@@ -74,6 +127,10 @@ + HiLink formDirective PreProc + HiLink formType Type + HiLink formString String ++ HiLink formNestedString String ++ HiLink formReserved Error ++ HiLink formTodo Todo ++ HiLink formSpecial SpecialChar + + if !exists("form_enhanced_color") + HiLink formHeaderStatement Statement +diff -u -r --new-file runtime/syntax.orig/fortran.vim runtime/syntax/fortran.vim +--- runtime/syntax.orig/fortran.vim 2006-04-22 06:22:12.000000000 -0500 ++++ runtime/syntax/fortran.vim 2008-11-06 10:05:04.000000000 -0600 +@@ -2,7 +2,7 @@ + " Language: Fortran95 (and Fortran90, Fortran77, F and elf90) + " Version: 0.88 + " URL: http://www.unb.ca/chem/ajit/syntax/fortran.vim +-" Last Change: 2006 Apr. 22 ++" Last Change: 2008 Nov 01 + " Maintainer: Ajit J. Thakkar (ajit AT unb.ca); <http://www.unb.ca/chem/ajit/> + " Usage: Do :help fortran-syntax from Vim + " Credits: +@@ -300,7 +300,7 @@ + syn match fortranLabelError "^.\{-,4}[^0-9 ]" contains=fortranTab + syn match fortranLabelError "^.\{4}\d\S" + endif +- syn match fortranComment excludenl "^[!c*].*$" contains=@fortranCommentGroup ++ syn match fortranComment excludenl "^[!c*].*$" contains=@fortranCommentGroup,@spell + syn match fortranLeftMargin transparent "^ \{5}" + syn match fortranContinueMark display "^.\{5}\S"lc=5 + else +diff -u -r --new-file runtime/syntax.orig/fstab.vim runtime/syntax/fstab.vim +--- runtime/syntax.orig/fstab.vim 2008-01-16 14:52:16.000000000 -0600 ++++ runtime/syntax/fstab.vim 2009-02-12 16:23:26.000000000 -0600 +@@ -2,14 +2,15 @@ + " Language: fstab file + " Maintaner: Radu Dineiu <radu.dineiu@gmail.com> + " URL: http://ld.yi.org/vim/fstab.vim +-" Last Change: 2008 Jan 16 +-" Version: 0.92 ++" Last Change: 2009 Feb 04 ++" Version: 0.93 + " + " Credits: + " David Necas (Yeti) <yeti@physics.muni.cz> + " Stefano Zacchiroli <zack@debian.org> + " Georgi Georgiev <chutz@gg3.net> + " James Vega <jamessan@debian.org> ++" Elias Probst <mail@eliasprobst.eu> + " + " Options: + " let fstab_unknown_fs_errors = 1 +@@ -46,7 +47,7 @@ + " Type + syn cluster fsTypeCluster contains=fsTypeKeyword,fsTypeUnknown + syn match fsTypeUnknown /\s\+\zs\w\+/ contained +-syn keyword fsTypeKeyword contained adfs ados affs atfs audiofs auto autofs befs bfs cd9660 cfs cifs coda cramfs devfs devpts e2compr efs ext2 ext2fs ext3 fdesc ffs filecore fuse hfs hpfs iso9660 jffs jffs2 jfs kernfs lfs linprocfs mfs minix msdos ncpfs nfs none ntfs null nwfs overlay ovlfs portal proc procfs ptyfs qnx4 reiserfs romfs shm smbfs sshfs std subfs swap sysfs sysv tcfs tmpfs udf ufs umap umsdos union usbfs userfs vfat vs3fs vxfs wrapfs wvfs xfs zisofs ++syn keyword fsTypeKeyword contained adfs ados affs atfs audiofs auto autofs befs bfs cd9660 cfs cifs coda cramfs devfs devpts e2compr efs ext2 ext2fs ext3 ext4 fdesc ffs filecore fuse hfs hpfs iso9660 jffs jffs2 jfs kernfs lfs linprocfs mfs minix msdos ncpfs nfs none ntfs null nwfs overlay ovlfs portal proc procfs ptyfs qnx4 reiserfs romfs shm smbfs sshfs std subfs swap sysfs sysv tcfs tmpfs udf ufs umap umsdos union usbfs userfs vfat vs3fs vxfs wrapfs wvfs xfs zisofs + + " Options + " ------- +@@ -91,7 +92,21 @@ + syn match fsOptionsKeywords contained /\<commit=/ nextgroup=fsOptionsNumber + syn keyword fsOptionsExt3Journal contained update inum + syn keyword fsOptionsExt3Data contained journal ordered writeback +-syn keyword fsOptionsKeywords contained noload ++syn keyword fsOptionsKeywords contained noload user_xattr nouser_xattr acl noacl ++ ++" Options: ext4 ++syn match fsOptionsKeywords contained /\<journal=/ nextgroup=fsOptionsExt4Journal ++syn match fsOptionsKeywords contained /\<data=/ nextgroup=fsOptionsExt4Data ++syn match fsOptionsKeywords contained /\<barrier=/ nextgroup=fsOptionsExt4Barrier ++syn match fsOptionsKeywords contained /\<journal_dev=/ nextgroup=fsOptionsNumber ++syn match fsOptionsKeywords contained /\<resuid=/ nextgroup=fsOptionsNumber ++syn match fsOptionsKeywords contained /\<resgid=/ nextgroup=fsOptionsNumber ++syn match fsOptionsKeywords contained /\<sb=/ nextgroup=fsOptionsNumber ++syn match fsOptionsKeywords contained /\<commit=/ nextgroup=fsOptionsNumber ++syn keyword fsOptionsExt4Journal contained update inum ++syn keyword fsOptionsExt4Data contained journal ordered writeback ++syn match fsOptionsExt4Barrier /[0-1]/ ++syn keyword fsOptionsKeywords contained noload extents orlov oldalloc user_xattr nouser_xattr acl noacl reservation noreservation bsddf minixdf check=none nocheck debug grpid nogroupid sysvgroups bsdgroups quota noquota grpquota usrquota bh nobh + + " Options: fat + syn match fsOptionsKeywords contained /\<blocksize=/ nextgroup=fsOptionsSize +@@ -241,6 +256,9 @@ + HiLink fsOptionsExt2Errors String + HiLink fsOptionsExt3Journal String + HiLink fsOptionsExt3Data String ++ HiLink fsOptionsExt4Journal String ++ HiLink fsOptionsExt4Data String ++ HiLink fsOptionsExt4Barrier Number + HiLink fsOptionsFatCheck String + HiLink fsOptionsConv String + HiLink fsOptionsFatType Number +diff -u -r --new-file runtime/syntax.orig/gdb.vim runtime/syntax/gdb.vim +--- runtime/syntax.orig/gdb.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/gdb.vim 2009-06-03 05:05:43.000000000 -0500 +@@ -2,7 +2,7 @@ + " Language: GDB command files + " Maintainer: Claudio Fleiner <claudio@fleiner.com> + " URL: http://www.fleiner.com/vim/syntax/gdb.vim +-" Last Change: 2003 Jan 04 ++" Last Change: 2009 May 25 + + " For version 5.x: Clear all syntax items + " For version 6.x: Quit when a syntax file was already loaded +@@ -35,7 +35,7 @@ + " some commonly used abreviations + syn keyword gdbStatement c disp undisp disas p + +-syn region gdbDocument matchgroup=gdbFuncDef start="\<document\>.*$" matchgroup=gdbFuncDef end="^end$" ++syn region gdbDocument matchgroup=gdbFuncDef start="\<document\>.*$" matchgroup=gdbFuncDef end="^end\s*$" + + syn match gdbStatement "\<add-shared-symbol-files\>" + syn match gdbStatement "\<add-symbol-file\>" +diff -u -r --new-file runtime/syntax.orig/git.vim runtime/syntax/git.vim +--- runtime/syntax.orig/git.vim 2008-04-15 22:15:49.000000000 -0500 ++++ runtime/syntax/git.vim 2009-12-24 10:29:21.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: generic git output +-" Maintainer: Tim Pope <vimNOSPAM@tpope.info> +-" Last Change: 2008 Mar 21 ++" Maintainer: Tim Pope <vimNOSPAM@tpope.org> ++" Last Change: 2009 Dec 24 + + if exists("b:current_syntax") + finish +@@ -13,14 +13,19 @@ + syn include @gitDiff syntax/diff.vim + + syn region gitHead start=/\%^/ end=/^$/ +-syn region gitHead start=/\%(^commit \x\{40\}$\)\@=/ end=/^$/ ++syn region gitHead start=/\%(^commit \x\{40\}\%(\s*(.*)\)\=$\)\@=/ end=/^$/ + + " For git reflog and git show ...^{tree}, avoid sync issues + syn match gitHead /^\d\{6\} \%(\w\{4} \)\=\x\{40\}\%( [0-3]\)\=\t.*/ + syn match gitHead /^\x\{40\} \x\{40}\t.*/ + +-syn region gitDiff start=/^\%(diff --git \)\@=/ end=/^\%(diff --git \|$\)\@=/ contains=@gitDiff fold +-syn region gitDiff start=/^\%(@@ -\)\@=/ end=/^\%(diff --git \|$\)\@=/ contains=@gitDiff ++syn region gitDiff start=/^\%(diff --git \)\@=/ end=/^\%(diff --\|$\)\@=/ contains=@gitDiff fold ++syn region gitDiff start=/^\%(@@ -\)\@=/ end=/^\%(diff --\%(git\|cc\|combined\) \|$\)\@=/ contains=@gitDiff ++ ++syn region gitDiffMerge start=/^\%(diff --\%(cc\|combined\) \)\@=/ end=/^\%(diff --\|$\)\@=/ contains=@gitDiff ++syn region gitDiffMerge start=/^\%(@@@@* -\)\@=/ end=/^\%(diff --\|$\)\@=/ contains=@gitDiff ++syn match gitDiffAdded "^ \++.*" contained containedin=gitDiffMerge ++syn match gitDiffRemoved "^ \+-.*" contained containedin=gitDiffMerge + + syn match gitKeyword /^\%(object\|type\|tag\|commit\|tree\|parent\|encoding\)\>/ contained containedin=gitHead nextgroup=gitHash,gitType skipwhite + syn match gitKeyword /^\%(tag\>\|ref:\)/ contained containedin=gitHead nextgroup=gitReference skipwhite +@@ -29,8 +34,6 @@ + syn match gitIdentityKeyword /^\%(author\|committer\|tagger\)\>/ contained containedin=gitHead nextgroup=gitIdentity skipwhite + syn match gitIdentityHeader /^\%(Author\|Commit\|Tagger\):/ contained containedin=gitHead nextgroup=gitIdentity skipwhite + syn match gitDateHeader /^\%(AuthorDate\|CommitDate\|Date\):/ contained containedin=gitHead nextgroup=gitDate skipwhite +-syn match gitIdentity /\S.\{-\} <[^>]*>/ contained nextgroup=gitDate skipwhite +-syn region gitEmail matchgroup=gitEmailDelimiter start=/</ end=/>/ keepend oneline contained containedin=gitIdentity + + syn match gitReflogHeader /^Reflog:/ contained containedin=gitHead nextgroup=gitReflogMiddle skipwhite + syn match gitReflogHeader /^Reflog message:/ contained containedin=gitHead skipwhite +@@ -42,14 +45,20 @@ + syn match gitType /\<\%(tag\|commit\|tree\|blob\)\>/ contained nextgroup=gitHash skipwhite + syn match gitStage /\<\d\t\@=/ contained + syn match gitReference /\S\+\S\@!/ contained +-syn match gitHash /\<\x\{40\}\>/ contained nextgroup=gitIdentity,gitStage skipwhite ++syn match gitHash /\<\x\{40\}\>/ contained nextgroup=gitIdentity,gitStage,gitHash skipwhite + syn match gitHash /^\<\x\{40\}\>/ containedin=gitHead contained nextgroup=gitHash skipwhite ++syn match gitHashAbbrev /\<\x\{4,40\}\>/ contained nextgroup=gitHashAbbrev skipwhite + syn match gitHashAbbrev /\<\x\{4,39\}\.\.\./he=e-3 contained nextgroup=gitHashAbbrev skipwhite +-syn match gitHashAbbrev /\<\x\{40\}\>/ contained nextgroup=gitHashAbbrev skipwhite ++ ++syn match gitIdentity /\S.\{-\} <[^>]*>/ contained nextgroup=gitDate skipwhite ++syn region gitEmail matchgroup=gitEmailDelimiter start=/</ end=/>/ keepend oneline contained containedin=gitIdentity ++ ++syn match gitNotesHeader /^Notes:\ze\n / + + hi def link gitDateHeader gitIdentityHeader + hi def link gitIdentityHeader gitIdentityKeyword + hi def link gitIdentityKeyword Label ++hi def link gitNotesHeader gitKeyword + hi def link gitReflogHeader gitKeyword + hi def link gitKeyword Keyword + hi def link gitIdentity String +@@ -63,5 +72,7 @@ + hi def link gitReference Function + hi def link gitStage gitType + hi def link gitType Type ++hi def link gitDiffAdded diffAdded ++hi def link gitDiffRemoved diffRemoved + + let b:current_syntax = "git" +diff -u -r --new-file runtime/syntax.orig/gitcommit.vim runtime/syntax/gitcommit.vim +--- runtime/syntax.orig/gitcommit.vim 2008-04-15 17:46:45.000000000 -0500 ++++ runtime/syntax/gitcommit.vim 2009-12-24 10:29:21.000000000 -0600 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: git commit file +-" Maintainer: Tim Pope <vimNOSPAM@tpope.info> ++" Maintainer: Tim Pope <vimNOSPAM@tpope.org> + " Filenames: *.git/COMMIT_EDITMSG +-" Last Change: 2008 Apr 09 ++" Last Change: 2009 Dec 24 + + if exists("b:current_syntax") + finish +@@ -16,48 +16,66 @@ + endif + + syn include @gitcommitDiff syntax/diff.vim +-syn region gitcommitDiff start=/\%(^diff --git \)\@=/ end=/^$\|^#\@=/ contains=@gitcommitDiff ++syn region gitcommitDiff start=/\%(^diff --\%(git\|cc\|combined\) \)\@=/ end=/^$\|^#\@=/ contains=@gitcommitDiff + + syn match gitcommitFirstLine "\%^[^#].*" nextgroup=gitcommitBlank skipnl +-syn match gitcommitSummary "^.\{0,50\}" contained containedin=gitcommitFirstLine nextgroup=gitcommitOverflow contains=@Spell ++syn match gitcommitSummary "^.\{0,50\}" contained containedin=gitcommitFirstLine nextgroup=gitcommitOverflow contains=@Spell + syn match gitcommitOverflow ".*" contained contains=@Spell + syn match gitcommitBlank "^[^#].*" contained contains=@Spell + syn match gitcommitComment "^#.*" +-syn region gitcommitHead start=/^# / end=/^#$/ contained transparent ++syn match gitcommitHead "^\%(# .*\n\)\+#$" contained transparent + syn match gitcommitOnBranch "\%(^# \)\@<=On branch" contained containedin=gitcommitComment nextgroup=gitcommitBranch skipwhite +-syn match gitcommitBranch "\S\+" contained ++syn match gitcommitOnBranch "\%(^# \)\@<=Your branch .\{-\} '" contained containedin=gitcommitComment nextgroup=gitcommitBranch skipwhite ++syn match gitcommitBranch "[^ \t']\+" contained ++syn match gitcommitNoBranch "\%(^# \)\@<=Not currently on any branch." contained containedin=gitcommitComment + syn match gitcommitHeader "\%(^# \)\@<=.*:$" contained containedin=gitcommitComment ++syn region gitcommitAuthor matchgroup=gitCommitHeader start=/\%(^# \)\@<=Author:/ end=/$/ keepend oneline contained containedin=gitcommitComment transparent ++syn match gitcommitNoChanges "\%(^# \)\@<=No changes$" contained containedin=gitcommitComment + + syn region gitcommitUntracked start=/^# Untracked files:/ end=/^#$\|^#\@!/ contains=gitcommitHeader,gitcommitHead,gitcommitUntrackedFile fold + syn match gitcommitUntrackedFile "\t\@<=.*" contained + + syn region gitcommitDiscarded start=/^# Changed but not updated:/ end=/^#$\|^#\@!/ contains=gitcommitHeader,gitcommitHead,gitcommitDiscardedType fold + syn region gitcommitSelected start=/^# Changes to be committed:/ end=/^#$\|^#\@!/ contains=gitcommitHeader,gitcommitHead,gitcommitSelectedType fold ++syn region gitcommitUnmerged start=/^# Unmerged paths:/ end=/^#$\|^#\@!/ contains=gitcommitHeader,gitcommitHead,gitcommitUnmergedType fold + + syn match gitcommitDiscardedType "\t\@<=[a-z][a-z ]*[a-z]: "he=e-2 contained containedin=gitcommitComment nextgroup=gitcommitDiscardedFile skipwhite + syn match gitcommitSelectedType "\t\@<=[a-z][a-z ]*[a-z]: "he=e-2 contained containedin=gitcommitComment nextgroup=gitcommitSelectedFile skipwhite ++syn match gitcommitUnmergedType "\t\@<=[a-z][a-z ]*[a-z]: "he=e-2 contained containedin=gitcommitComment nextgroup=gitcommitUnmergedFile skipwhite + syn match gitcommitDiscardedFile ".\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitDiscardedArrow + syn match gitcommitSelectedFile ".\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitSelectedArrow ++syn match gitcommitUnmergedFile ".\{-\}\%($\| -> \)\@=" contained nextgroup=gitcommitSelectedArrow + syn match gitcommitDiscardedArrow " -> " contained nextgroup=gitcommitDiscardedFile + syn match gitcommitSelectedArrow " -> " contained nextgroup=gitcommitSelectedFile ++syn match gitcommitUnmergedArrow " -> " contained nextgroup=gitcommitSelectedFile ++ ++syn match gitcommitWarning "\%^[^#].*: needs merge$" nextgroup=gitcommitWarning skipnl ++syn match gitcommitWarning "^[^#].*: needs merge$" nextgroup=gitcommitWarning skipnl contained ++syn match gitcommitWarning "^\%(no changes added to commit\|nothing \%(added \)\=to commit\)\>.*\%$" + + hi def link gitcommitSummary Keyword + hi def link gitcommitComment Comment + hi def link gitcommitUntracked gitcommitComment + hi def link gitcommitDiscarded gitcommitComment + hi def link gitcommitSelected gitcommitComment ++hi def link gitcommitUnmerged gitcommitComment + hi def link gitcommitOnBranch Comment + hi def link gitcommitBranch Special ++hi def link gitcommitNoBranch gitCommitBranch + hi def link gitcommitDiscardedType gitcommitType + hi def link gitcommitSelectedType gitcommitType ++hi def link gitcommitUnmergedType gitcommitType + hi def link gitcommitType Type ++hi def link gitcommitNoChanges gitcommitHeader + hi def link gitcommitHeader PreProc + hi def link gitcommitUntrackedFile gitcommitFile + hi def link gitcommitDiscardedFile gitcommitFile + hi def link gitcommitSelectedFile gitcommitFile ++hi def link gitcommitUnmergedFile gitcommitFile + hi def link gitcommitFile Constant + hi def link gitcommitDiscardedArrow gitcommitArrow + hi def link gitcommitSelectedArrow gitcommitArrow ++hi def link gitcommitUnmergedArrow gitcommitArrow + hi def link gitcommitArrow gitcommitComment + "hi def link gitcommitOverflow Error + hi def link gitcommitBlank Error +diff -u -r --new-file runtime/syntax.orig/gitconfig.vim runtime/syntax/gitconfig.vim +--- runtime/syntax.orig/gitconfig.vim 2008-06-04 10:45:44.000000000 -0500 ++++ runtime/syntax/gitconfig.vim 2009-12-24 10:29:21.000000000 -0600 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: git config file +-" Maintainer: Tim Pope <vimNOSPAM@tpope.info> ++" Maintainer: Tim Pope <vimNOSPAM@tpope.org> + " Filenames: gitconfig, .gitconfig, *.git/config +-" Last Change: 2008 Jun 04 ++" Last Change: 2009 Dec 24 + + if exists("b:current_syntax") + finish +diff -u -r --new-file runtime/syntax.orig/gitrebase.vim runtime/syntax/gitrebase.vim +--- runtime/syntax.orig/gitrebase.vim 2008-04-16 03:12:25.000000000 -0500 ++++ runtime/syntax/gitrebase.vim 2009-12-24 10:29:21.000000000 -0600 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: git rebase --interactive +-" Maintainer: Tim Pope <vimNOSPAM@tpope.info> ++" Maintainer: Tim Pope <vimNOSPAM@tpope.org> + " Filenames: git-rebase-todo +-" Last Change: 2008 Apr 16 ++" Last Change: 2009 Dec 24 + + if exists("b:current_syntax") + finish +@@ -14,6 +14,7 @@ + syn match gitrebaseCommit "\v<\x{7,40}>" nextgroup=gitrebaseSummary skipwhite + syn match gitrebasePick "\v^p%(ick)=>" nextgroup=gitrebaseCommit skipwhite + syn match gitrebaseEdit "\v^e%(dit)=>" nextgroup=gitrebaseCommit skipwhite ++syn match gitrebaseReword "\v^r%(eword)=>" nextgroup=gitrebaseCommit skipwhite + syn match gitrebaseSquash "\v^s%(quash)=>" nextgroup=gitrebaseCommit skipwhite + syn match gitrebaseSummary ".*" contains=gitrebaseHash contained + syn match gitrebaseComment "^#.*" contains=gitrebaseHash +@@ -23,9 +24,10 @@ + hi def link gitrebaseHash Identifier + hi def link gitrebasePick Statement + hi def link gitrebaseEdit PreProc ++hi def link gitrebaseReword Special + hi def link gitrebaseSquash Type + hi def link gitrebaseSummary String + hi def link gitrebaseComment Comment +-hi def link gitrebaseSquashError Error ++hi def link gitrebaseSquashError Error + + let b:current_syntax = "gitrebase" +diff -u -r --new-file runtime/syntax.orig/groovy.vim runtime/syntax/groovy.vim +--- runtime/syntax.orig/groovy.vim 2006-03-24 10:29:41.000000000 -0600 ++++ runtime/syntax/groovy.vim 2009-11-28 06:33:43.000000000 -0600 +@@ -228,6 +228,7 @@ + " syntax include @groovyHtml <sfile>:p:h/html.vim + syntax include @groovyHtml runtime! syntax/html.vim + unlet b:current_syntax ++ syntax spell default " added by Bram + syn region groovyDocComment start="/\*\*" end="\*/" keepend contains=groovyCommentTitle,@groovyHtml,groovyDocTags,groovyTodo,@Spell + syn region groovyCommentTitle contained matchgroup=groovyDocComment start="/\*\*" matchgroup=groovyCommentTitle keepend end="\.$" end="\.[ \t\r<&]"me=e-1 end="[^{]@"me=s-2,he=s-1 end="\*/"me=s-1,he=s-1 contains=@groovyHtml,groovyCommentStar,groovyTodo,@Spell,groovyDocTags + +diff -u -r --new-file runtime/syntax.orig/haskell.vim runtime/syntax/haskell.vim +--- runtime/syntax.orig/haskell.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/haskell.vim 2009-01-14 14:15:20.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: Haskell + " Maintainer: Haskell Cafe mailinglist <haskell-cafe@haskell.org> +-" Last Change: 2004 Feb 23 ++" Last Change: 2008 Dec 15 + " Original Author: John Williams <jrw@pobox.com> + " + " Thanks to Ryan Crumley for suggestions and John Meacham for +@@ -30,6 +30,7 @@ + " in eol comment character class + " 2004 Feb 23: Made the leading comments somewhat clearer where it comes + " to attribution of work. ++" 2008 Dec 15: Added comments as contained element in import statements + + " Remove any old syntax stuff hanging around + if version < 600 +@@ -67,7 +68,7 @@ + " because otherwise they would match as keywords at the start of a + " "literate" comment (see lhs.vim). + syn match hsModule "\<module\>" +-syn match hsImport "\<import\>.*"he=s+6 contains=hsImportMod ++syn match hsImport "\<import\>.*"he=s+6 contains=hsImportMod,hsLineComment,hsBlockComment + syn match hsImportMod contained "\<\(as\|qualified\|hiding\)\>" + syn match hsInfix "\<\(infix\|infixl\|infixr\)\>" + syn match hsStructure "\<\(class\|data\|deriving\|instance\|default\|where\)\>" +diff -u -r --new-file runtime/syntax.orig/help.vim runtime/syntax/help.vim +--- runtime/syntax.orig/help.vim 2006-05-13 01:42:22.000000000 -0500 ++++ runtime/syntax/help.vim 2009-06-03 05:07:39.000000000 -0500 +@@ -1,14 +1,14 @@ + " Vim syntax file + " Language: Vim help file + " Maintainer: Bram Moolenaar (Bram@vim.org) +-" Last Change: 2006 May 13 ++" Last Change: 2009 May 18 + + " Quit when a (custom) syntax file was already loaded + if exists("b:current_syntax") + finish + endif + +-syn match helpHeadline "^[-A-Z .]\+[ \t]\+\*"me=e-1 ++syn match helpHeadline "^[-A-Z .][-A-Z0-9 .()]*[ \t]\+\*"me=e-1 + syn match helpSectionDelim "^=\{3,}.*===$" + syn match helpSectionDelim "^-\{3,}.*--$" + syn region helpExample matchgroup=helpIgnore start=" >$" start="^>$" end="^[^ \t]"me=e-1 end="^<" +diff -u -r --new-file runtime/syntax.orig/indent.vim runtime/syntax/indent.vim +--- runtime/syntax.orig/indent.vim 2007-06-17 10:02:22.000000000 -0500 ++++ runtime/syntax/indent.vim 2010-02-11 06:48:22.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: indent(1) configuration file + " Maintainer: Nikolai Weibull <now@bitwi.se> +-" Latest Revision: 2007-06-17 ++" Latest Revision: 2010-01-23 + " indent_is_bsd: If exists, will change somewhat to match BSD implementation + " + " TODO: is the deny-all (a la lilo.vim nice or no?)... +@@ -27,7 +27,7 @@ + \ contains=indentTodo,@Spell + + if !exists("indent_is_bsd") +- syn match indentOptions '-i\|--indentation-level' ++ syn match indentOptions '-i\|--indentation-level\|-il\|--indent-level' + \ nextgroup=indentNumber skipwhite skipempty + endif + syn match indentOptions '-\%(bli\|c\%([bl]i\|[dip]\)\=\|di\=\|ip\=\|lc\=\|pp\=i\|sbi\|ts\|-\%(brace-indent\|comment-indentation\|case-brace-indentation\|declaration-comment-column\|continuation-indentation\|case-indentation\|else-endif-column\|line-comments-indentation\|declaration-indentation\|indent-level\|parameter-indentation\|line-length\|comment-line-length\|paren-indentation\|preprocessor-indentation\|struct-brace-indentation\|tab-size\)\)' +@@ -123,6 +123,7 @@ + \ -ut --use-tabs + \ -v --verbose + \ -version --version ++ \ -linux --linux-style + + if exists("indent_is_bsd") + syn keyword indentOptions -ip -ei -nei +diff -u -r --new-file runtime/syntax.orig/java.vim runtime/syntax/java.vim +--- runtime/syntax.orig/java.vim 2007-12-20 17:14:48.000000000 -0600 ++++ runtime/syntax/java.vim 2009-03-22 14:39:44.000000000 -0500 +@@ -2,7 +2,7 @@ + " Language: Java + " Maintainer: Claudio Fleiner <claudio@fleiner.com> + " URL: http://www.fleiner.com/vim/syntax/java.vim +-" Last Change: 2007 Dec 21 ++" Last Change: 2009 Mar 14 + + " Please check :help java.vim for comments on some of the options available. + +@@ -15,6 +15,7 @@ + endif + " we define it here so that included files can test for it + let main_syntax='java' ++ syn region javaFold start="{" end="}" transparent fold + endif + + " don't use standard HiLink, it will not work with included syntax files +@@ -58,7 +59,7 @@ + syn keyword javaClassDecl enum + syn match javaClassDecl "^class\>" + syn match javaClassDecl "[^.]\s*\<class\>"ms=s+1 +-syn match javaAnnotation "@[_$a-zA-Z][_$a-zA-Z0-9_]*\>" ++syn match javaAnnotation "@\([_$a-zA-Z][_$a-zA-Z0-9]*\.\)*[_$a-zA-Z][_$a-zA-Z0-9]*\>" + syn match javaClassDecl "@interface\>" + syn keyword javaBranch break continue nextgroup=javaUserLabelRef skipwhite + syn match javaUserLabelRef "\k\+" contained +@@ -121,11 +122,6 @@ + syn keyword javaLabel default + + if !exists("java_allow_cpp_keywords") +- " The default used to be to highlight C++ keywords. But several people +- " don't like that, so default to not highlighting these. +- let java_allow_cpp_keywords = 1 +-endif +-if !java_allow_cpp_keywords + syn keyword javaError auto delete extern friend inline redeclared + syn keyword javaError register signed sizeof struct template typedef union + syn keyword javaError unsigned operator +@@ -161,6 +157,11 @@ + " syntax coloring for javadoc comments (HTML) + syntax include @javaHtml <sfile>:p:h/html.vim + unlet b:current_syntax ++ " HTML enables spell checking for all text that is not in a syntax item. This ++ " is wrong for Java (all identifiers would be spell-checked), so it's undone ++ " here. ++ syntax spell default ++ + syn region javaDocComment start="/\*\*" end="\*/" keepend contains=javaCommentTitle,@javaHtml,javaDocTags,javaDocSeeTag,javaTodo,@Spell + syn region javaCommentTitle contained matchgroup=javaDocComment start="/\*\*" matchgroup=javaCommentTitle keepend end="\.$" end="\.[ \t\r<&]"me=e-1 end="[^{]@"me=s-2,he=s-1 end="\*/"me=s-1,he=s-1 contains=@javaHtml,javaCommentStar,javaTodo,@Spell,javaDocTags,javaDocSeeTag + +@@ -179,7 +180,7 @@ + " Strings and constants + syn match javaSpecialError contained "\\." + syn match javaSpecialCharError contained "[^']" +-syn match javaSpecialChar contained "\\\([4-9]\d\|[0-3]\d\d\|[\"\\'ntbrf]\|u\x\{4\}\)" ++syn match javaSpecialChar contained "\\\([4-9]\d\|[0-3]\d\d\|[\"\\'ntbrf]\|u\+\x\{4\}\)" + syn region javaString start=+"+ end=+"+ end=+$+ contains=javaSpecialChar,javaSpecialError,@Spell + " next line disabled, it can cause a crash for a long line + "syn match javaStringError +"\([^"\\]\|\\.\)*$+ +@@ -192,7 +193,7 @@ + syn match javaNumber "\<\d\+\([eE][-+]\=\d\+\)\=[fFdD]\>" + + " unicode characters +-syn match javaSpecial "\\u\d\{4\}" ++syn match javaSpecial "\\u\+\d\{4\}" + + syn cluster javaTop add=javaString,javaCharacter,javaNumber,javaSpecial,javaStringError + +diff -u -r --new-file runtime/syntax.orig/kconfig.vim runtime/syntax/kconfig.vim +--- runtime/syntax.orig/kconfig.vim 2006-04-19 15:49:04.000000000 -0500 ++++ runtime/syntax/kconfig.vim 2009-06-03 05:05:43.000000000 -0500 +@@ -1,6 +1,6 @@ + " Vim syntax file + " Maintainer: Nikolai Weibull <now@bitwi.se> +-" Latest Revision: 2006-04-14 ++" Latest Revision: 2009-05-25 + + if exists("b:current_syntax") + finish +@@ -666,9 +666,9 @@ + + syn match kconfigComment display '#.*$' contains=kconfigTodo + +-syn keyword kconfigKeyword config menuconfig comment menu mainmenu ++syn keyword kconfigKeyword config menuconfig comment mainmenu + +-syn keyword kconfigConditional choice endchoice if endif ++syn keyword kconfigConditional menu endmenu choice endchoice if endif + + syn keyword kconfigPreProc source + \ nextgroup=kconfigPath +diff -u -r --new-file runtime/syntax.orig/lex.vim runtime/syntax/lex.vim +--- runtime/syntax.orig/lex.vim 2005-09-06 12:27:26.000000000 -0500 ++++ runtime/syntax/lex.vim 2009-10-08 16:18:57.000000000 -0500 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: Lex +-" Maintainer: Dr. Charles E. Campbell, Jr. <NdrOchipS@PcampbellAfamily.Mbiz> +-" Last Change: Sep 06, 2005 +-" Version: 7 ++" Maintainer: Charles E. Campbell, Jr. <NdrOchipS@PcampbellAfamily.Mbiz> ++" Last Change: Sep 11, 2009 ++" Version: 10 + " URL: http://mysite.verizon.net/astronaut/vim/index.html#vimlinks_syntax + " + " Option: +@@ -16,7 +16,7 @@ + finish + endif + +-" Read the C syntax to start with ++" Read the C/C++ syntax to start with + if version >= 600 + if exists("lex_uses_cpp") + runtime! syntax/cpp.vim +@@ -36,32 +36,60 @@ + " --- Lex stuff --- + " --- ========= --- + +-"I'd prefer to use lex.* , but it doesn't handle forward definitions yet ++"I'd prefer to use lex.* , but vim doesn't handle forward definitions yet + syn cluster lexListGroup contains=lexAbbrvBlock,lexAbbrv,lexAbbrv,lexAbbrvRegExp,lexInclude,lexPatBlock,lexPat,lexBrace,lexPatString,lexPatTag,lexPatTag,lexPatComment,lexPatCodeLine,lexMorePat,lexPatSep,lexSlashQuote,lexPatCode,cInParen,cUserLabel,cOctalZero,cCppSkip,cErrInBracket,cErrInParen,cOctalError,cCppOut2,cCommentStartError,cParenError +-syn cluster lexListPatCodeGroup contains=lexAbbrvBlock,lexAbbrv,lexAbbrv,lexAbbrvRegExp,lexInclude,lexPatBlock,lexPat,lexBrace,lexPatTag,lexPatTag,lexPatComment,lexPatCodeLine,lexMorePat,lexPatSep,lexSlashQuote,cInParen,cUserLabel,cOctalZero,cCppSkip,cErrInBracket,cErrInParen,cOctalError,cCppOut2,cCommentStartError,cParenError ++syn cluster lexListPatCodeGroup contains=lexAbbrvBlock,lexAbbrv,lexAbbrv,lexAbbrvRegExp,lexInclude,lexPatBlock,lexPat,lexBrace,lexPatTag,lexPatTag,lexPatTagZoneStart,lexPatComment,lexPatCodeLine,lexMorePat,lexPatSep,lexSlashQuote,cInParen,cUserLabel,cOctalZero,cCppSkip,cErrInBracket,cErrInParen,cOctalError,cCppOut2,cCommentStartError,cParenError + + " Abbreviations Section +-syn region lexAbbrvBlock start="^\(\h\+\s\|%{\)" end="^\ze%%$" skipnl nextgroup=lexPatBlock contains=lexAbbrv,lexInclude,lexAbbrvComment,lexStartState ++if has("folding") ++ syn region lexAbbrvBlock fold start="^\(\h\+\s\|%{\)" end="^\ze%%$" skipnl nextgroup=lexPatBlock contains=lexAbbrv,lexInclude,lexAbbrvComment,lexStartState ++else ++ syn region lexAbbrvBlock start="^\(\h\+\s\|%{\)" end="^\ze%%$" skipnl nextgroup=lexPatBlock contains=lexAbbrv,lexInclude,lexAbbrvComment,lexStartState ++endif + syn match lexAbbrv "^\I\i*\s"me=e-1 skipwhite contained nextgroup=lexAbbrvRegExp + syn match lexAbbrv "^%[sx]" contained + syn match lexAbbrvRegExp "\s\S.*$"lc=1 contained nextgroup=lexAbbrv,lexInclude +-syn region lexInclude matchgroup=lexSep start="^%{" end="%}" contained contains=ALLBUT,@lexListGroup +-syn region lexAbbrvComment start="^\s\+/\*" end="\*/" contains=@Spell +-syn region lexStartState matchgroup=lexAbbrv start="^%\a\+" end="$" contained ++if has("folding") ++ syn region lexInclude fold matchgroup=lexSep start="^%{" end="%}" contained contains=ALLBUT,@lexListGroup ++ syn region lexAbbrvComment fold start="^\s\+/\*" end="\*/" contains=@Spell ++ syn region lexStartState fold matchgroup=lexAbbrv start="^%\a\+" end="$" contained ++else ++ syn region lexInclude matchgroup=lexSep start="^%{" end="%}" contained contains=ALLBUT,@lexListGroup ++ syn region lexAbbrvComment start="^\s\+/\*" end="\*/" contains=@Spell ++ syn region lexStartState matchgroup=lexAbbrv start="^%\a\+" end="$" contained ++endif + + "%% : Patterns {Actions} +-syn region lexPatBlock matchgroup=Todo start="^%%$" matchgroup=Todo end="^%%$" skipnl skipwhite contains=lexPat,lexPatTag,lexPatComment +-syn region lexPat start=+\S+ skip="\\\\\|\\." end="\s"me=e-1 contained nextgroup=lexMorePat,lexPatSep contains=lexPatString,lexSlashQuote,lexBrace +-syn region lexBrace start="\[" skip=+\\\\\|\\+ end="]" contained +-syn region lexPatString matchgroup=String start=+"+ skip=+\\\\\|\\"+ matchgroup=String end=+"+ contained +-syn match lexPatTag "^<\I\i*\(,\I\i*\)*>*" contained nextgroup=lexPat,lexPatTag,lexMorePat,lexPatSep ++if has("folding") ++ syn region lexPatBlock fold matchgroup=Todo start="^%%$" matchgroup=Todo end="^%%$" skipnl skipwhite contains=lexPatTag,lexPatTagZone,lexPatComment,lexPat ++ syn region lexPat fold start=+\S+ skip="\\\\\|\\." end="\s"me=e-1 contained nextgroup=lexMorePat,lexPatSep contains=lexPatTag,lexPatString,lexSlashQuote,lexBrace ++ syn region lexBrace fold start="\[" skip=+\\\\\|\\+ end="]" contained ++ syn region lexPatString fold matchgroup=String start=+"+ skip=+\\\\\|\\"+ matchgroup=String end=+"+ contained ++else ++ syn region lexPatBlock matchgroup=Todo start="^%%$" matchgroup=Todo end="^%%$" skipnl skipwhite contains=lexPatTag,lexPatTagZone,lexPatComment,lexPat ++ syn region lexPat start=+\S+ skip="\\\\\|\\." end="\s"me=e-1 contained nextgroup=lexMorePat,lexPatSep contains=lexPatTag,lexPatString,lexSlashQuote,lexBrace ++ syn region lexBrace start="\[" skip=+\\\\\|\\+ end="]" contained ++ syn region lexPatString matchgroup=String start=+"+ skip=+\\\\\|\\"+ matchgroup=String end=+"+ contained ++endif ++syn match lexPatTag "^<\I\i*\(,\I\i*\)*>" contained nextgroup=lexPat,lexPatTag,lexMorePat,lexPatSep ++syn match lexPatTagZone "^<\I\i*\(,\I\i*\)*>\s*\ze{" contained nextgroup=lexPatTagZoneStart + syn match lexPatTag +^<\I\i*\(,\I\i*\)*>*\(\\\\\)*\\"+ contained nextgroup=lexPat,lexPatTag,lexMorePat,lexPatSep +-syn region lexPatComment start="^\s*/\*" end="\*/" skipnl contained contains=cTodo skipwhite nextgroup=lexPatComment,lexPat,@Spell ++if has("folding") ++ syn region lexPatTagZoneStart matchgroup=lexPatTag fold start='{' end='}' contained contains=lexPat,lexPatComment ++ syn region lexPatComment start="\s\+/\*" end="\*/" fold skipnl contained contains=cTodo skipwhite nextgroup=lexPatComment,lexPat,@Spell ++else ++ syn region lexPatTagZoneStart matchgroup=lexPatTag start='{' end='}' contained contains=lexPat,lexPatComment ++ syn region lexPatComment start="\s\+/\*" end="\*/" skipnl contained contains=cTodo skipwhite nextgroup=lexPatComment,lexPat,@Spell ++endif + syn match lexPatCodeLine ".*$" contained contains=ALLBUT,@lexListGroup + syn match lexMorePat "\s*|\s*$" skipnl contained nextgroup=lexPat,lexPatTag,lexPatComment + syn match lexPatSep "\s\+" contained nextgroup=lexMorePat,lexPatCode,lexPatCodeLine + syn match lexSlashQuote +\(\\\\\)*\\"+ contained +-syn region lexPatCode matchgroup=Delimiter start="{" matchgroup=Delimiter end="}" skipnl contained contains=ALLBUT,@lexListPatCodeGroup ++if has("folding") ++ syn region lexPatCode matchgroup=Delimiter start="{" end="}" fold skipnl contained contains=ALLBUT,@lexListPatCodeGroup ++else ++ syn region lexPatCode matchgroup=Delimiter start="{" end="}" skipnl contained contains=ALLBUT,@lexListPatCodeGroup ++endif + + syn keyword lexCFunctions BEGIN input unput woutput yyleng yylook yytext + syn keyword lexCFunctions ECHO output winput wunput yyless yymore yywrap +@@ -80,9 +108,10 @@ + syn sync match lexSyncPat groupthere lexPatBlock "^%%$" + + " The default highlighting. +-hi def link lexSlashQuote lexPat +-hi def link lexBrace lexPat + hi def link lexAbbrvComment lexPatComment ++hi def link lexBrace lexPat ++hi def link lexPatTagZone lexPatTag ++hi def link lexSlashQuote lexPat + + hi def link lexAbbrvRegExp Macro + hi def link lexAbbrv SpecialChar +diff -u -r --new-file runtime/syntax.orig/lhaskell.vim runtime/syntax/lhaskell.vim +--- runtime/syntax.orig/lhaskell.vim 2008-07-01 12:47:29.000000000 -0500 ++++ runtime/syntax/lhaskell.vim 2009-05-14 13:53:07.000000000 -0500 +@@ -4,8 +4,8 @@ + " \begin{code} \end{code} blocks + " Maintainer: Haskell Cafe mailinglist <haskell-cafe@haskell.org> + " Original Author: Arthur van Leeuwen <arthurvl@cs.uu.nl> +-" Last Change: 2008 Jul 01 +-" Version: 1.02 ++" Last Change: 2009 May 08 ++" Version: 1.04 + " + " Thanks to Ian Lynagh for thoughtful comments on initial versions and + " for the inspiration for writing this in the first place. +@@ -29,8 +29,10 @@ + " 2004 February 20: Cleaned up the guessing and overriding a bit + " 2004 February 23: Cleaned up syntax highlighting for \begin{code} and + " \end{code}, added some clarification to the attributions +-" 2008 July 1: Removed % from guess list, as it totally breaks plain +-" text markup guessing ++" 2008 July 1: Removed % from guess list, as it totally breaks plain ++" text markup guessing ++" 2009 April 29: Fixed highlighting breakage in TeX mode, ++" thanks to Kalman Noel + " + + +@@ -73,14 +75,14 @@ + " - \begin{env} (for env != code) + " - \part, \chapter, \section, \subsection, \subsubsection, etc + if b:lhs_markup == "unknown" +- if search('\\documentclass\|\\begin{\(code}\)\@!\|\\\(sub \)*section\|\\chapter|\\part','W') != 0 ++ if search('\\documentclass\|\\begin{\(code}\)\@!\|\\\(sub\)*section\|\\chapter|\\part','W') != 0 + let b:lhs_markup = "tex" + else + let b:lhs_markup = "plain" + endif + endif + +-" If user wants us to highlight TeX syntax or guess thinks it's TeX, read it. ++" If user wants us to highlight TeX syntax or guess thinks it's TeX, read it. + if b:lhs_markup == "tex" + if version < 600 + source <sfile>:p:h/tex.vim +@@ -91,6 +93,9 @@ + " Tex.vim removes "_" from 'iskeyword', but we need it for Haskell. + setlocal isk+=_ + endif ++ syntax cluster lhsTeXContainer contains=tex.*Zone,texAbstract ++else ++ syntax cluster lhsTeXContainer contains=.* + endif + + " Literate Haskell is Haskell in between text, so at least read Haskell +@@ -101,8 +106,8 @@ + syntax include @haskellTop syntax/haskell.vim + endif + +-syntax region lhsHaskellBirdTrack start="^>" end="\%(^[^>]\)\@=" contains=@haskellTop,lhsBirdTrack +-syntax region lhsHaskellBeginEndBlock start="^\\begin{code}\s*$" matchgroup=NONE end="\%(^\\end{code}.*$\)\@=" contains=@haskellTop,@beginCode ++syntax region lhsHaskellBirdTrack start="^>" end="\%(^[^>]\)\@=" contains=@haskellTop,lhsBirdTrack containedin=@lhsTeXContainer ++syntax region lhsHaskellBeginEndBlock start="^\\begin{code}\s*$" matchgroup=NONE end="\%(^\\end{code}.*$\)\@=" contains=@haskellTop,@beginCode containedin=@lhsTeXContainer + + syntax match lhsBirdTrack "^>" contained + +diff -u -r --new-file runtime/syntax.orig/lilo.vim runtime/syntax/lilo.vim +--- runtime/syntax.orig/lilo.vim 2004-07-20 12:53:05.000000000 -0500 ++++ runtime/syntax/lilo.vim 2010-02-11 06:45:15.000000000 -0600 +@@ -1,10 +1,8 @@ + " Vim syntax file +-" This is a GENERATED FILE. Please always refer to source file at the URI below. + " Language: lilo configuration (lilo.conf) +-" Maintainer: David Ne\v{c}as (Yeti) <yeti@physics.muni.cz> +-" Last Change: 2004-07-20 +-" URL: http://trific.ath.cx/Ftp/vim/syntax/lilo.vim +- ++" Maintainer: Niels Horn <niels.horn@gmail.com> ++" Previous Maintainer: David Necas (Yeti) <yeti@physics.muni.cz> ++" Last Change: 2010-02-03 + + " Setup + if version >= 600 +@@ -64,7 +62,7 @@ + + " String + syn keyword liloOption menu-title nextgroup=liloEqString,liloEqStringComment,liloError skipwhite skipempty +-syn keyword liloKernelOpt append nextgroup=liloEqString,liloEqStringComment,liloError skipwhite skipempty ++syn keyword liloKernelOpt append addappend nextgroup=liloEqString,liloEqStringComment,liloError skipwhite skipempty + syn keyword liloImageOpt fallback literal nextgroup=liloEqString,liloEqStringComment,liloError skipwhite skipempty + + " Hex number +diff -u -r --new-file runtime/syntax.orig/lisp.vim runtime/syntax/lisp.vim +--- runtime/syntax.orig/lisp.vim 2007-11-14 10:37:14.000000000 -0600 ++++ runtime/syntax/lisp.vim 2009-03-22 14:39:57.000000000 -0500 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: Lisp + " Maintainer: Dr. Charles E. Campbell, Jr. <NdrOchipS@PcampbellAfamily.Mbiz> +-" Last Change: Oct 19, 2007 +-" Version: 20 ++" Last Change: Mar 05, 2009 ++" Version: 21 + " URL: http://mysite.verizon.net/astronaut/vim/index.html#vimlinks_syntax + " + " Thanks to F Xavier Noria for a list of 978 Common Lisp symbols +@@ -534,7 +534,8 @@ + + " --------------------------------------------------------------------- + " Numbers: supporting integers and floating point numbers {{{1 +-syn match lispNumber "-\=\(\.\d\+\|\d\+\(\.\d*\)\=\)\(e[-+]\=\d\+\)\=" ++syn match lispNumber "-\=\(\.\d\+\|\d\+\(\.\d*\)\=\)\([dDeEfFlL][-+]\=\d\+\)\=" ++syn match lispNumber "-\=\(\d\+/\d\+\)" + + syn match lispSpecial "\*\w[a-z_0-9-]*\*" + syn match lispSpecial !#|[^()'`,"; \t]\+|#! +diff -u -r --new-file runtime/syntax.orig/logtalk.vim runtime/syntax/logtalk.vim +--- runtime/syntax.orig/logtalk.vim 2008-07-06 13:09:17.000000000 -0500 ++++ runtime/syntax/logtalk.vim 2008-11-06 10:05:14.000000000 -0600 +@@ -2,7 +2,7 @@ + " + " Language: Logtalk + " Maintainer: Paulo Moura <pmoura@logtalk.org> +-" Last Change: June 16, 2008 ++" Last Change: Oct 31, 2008 + + + " Quit when a syntax file was already loaded: +@@ -51,9 +51,9 @@ + + " Logtalk opening entity directives + +-syn region logtalkOpenEntityDir matchgroup=logtalkOpenEntityDirTag start=":- object(" matchgroup=logtalkOpenEntityDirTag end=")\." contains=logtalkEntity,logtalkVariable,logtalkNumber,logtalkOperator,logtalkString,logtalkAtom,logtalkEntityRel +-syn region logtalkOpenEntityDir matchgroup=logtalkOpenEntityDirTag start=":- protocol(" matchgroup=logtalkOpenEntityDirTag end=")\." contains=logtalkEntity,logtalkVariable,logtalkNumber,logtalkOperator,logtalkEntityRel +-syn region logtalkOpenEntityDir matchgroup=logtalkOpenEntityDirTag start=":- category(" matchgroup=logtalkOpenEntityDirTag end=")\." contains=logtalkEntity,logtalkVariable,logtalkNumber,logtalkOperator,logtalkEntityRel ++syn region logtalkOpenEntityDir matchgroup=logtalkOpenEntityDirTag start=":- object(" matchgroup=logtalkOpenEntityDirTag end=")\." contains=logtalkEntity,logtalkVariable,logtalkNumber,logtalkOperator,logtalkString,logtalkAtom,logtalkEntityRel,logtalkLineComment ++syn region logtalkOpenEntityDir matchgroup=logtalkOpenEntityDirTag start=":- protocol(" matchgroup=logtalkOpenEntityDirTag end=")\." contains=logtalkEntity,logtalkVariable,logtalkNumber,logtalkOperator,logtalkEntityRel,logtalkLineComment ++syn region logtalkOpenEntityDir matchgroup=logtalkOpenEntityDirTag start=":- category(" matchgroup=logtalkOpenEntityDirTag end=")\." contains=logtalkEntity,logtalkVariable,logtalkNumber,logtalkOperator,logtalkEntityRel,logtalkLineComment + + + " Logtalk closing entity directives +diff -u -r --new-file runtime/syntax.orig/mail.vim runtime/syntax/mail.vim +--- runtime/syntax.orig/mail.vim 2008-01-18 06:28:18.000000000 -0600 ++++ runtime/syntax/mail.vim 2008-11-09 07:12:28.000000000 -0600 +@@ -2,7 +2,7 @@ + " Language: Mail file + " Previous Maintainer: Felix von Leitner <leitner@math.fu-berlin.de> + " Maintainer: Gautam Iyer <gi1242@users.sourceforge.net> +-" Last Change: Thu 17 Jan 2008 11:25:44 AM PST ++" Last Change: Thu 06 Nov 2008 10:10:55 PM PST + + " Quit when a syntax file was already loaded + if exists("b:current_syntax") +@@ -24,28 +24,35 @@ + " emails + " According to RFC 2822 any printable ASCII character can appear in a field + " name, except ':'. +-syn region mailHeader contains=@mailHeaderFields,@NoSpell start="^From .*\d\d\d\d$" skip="^\s" end="\v^[!-9;-~]*([^!-~]|$)"me=s-1 ++syn region mailHeader contains=@mailHeaderFields,@NoSpell start="^From .*\d\d\d\d$" skip="^\s" end="\v^[!-9;-~]*([^!-~]|$)"me=s-1 fold + syn match mailHeaderKey contained contains=mailEmail,@NoSpell "^From\s.*\d\d\d\d$" ++ ++" Nothing else depends on case. ++syn case ignore ++ ++" Headers in properly quoted (with "> " or ">") emails are matched ++syn region mailHeader keepend contains=@mailHeaderFields,@mailQuoteExps,@NoSpell start="^\z(\(> \?\)*\)\v(newsgroups|x-([a-z\-])*|path|xref|message-id|from|((in-)?reply-)?to|b?cc|subject|return-path|received|date|replied):" skip="^\z1\s" end="\v^\z1[!-9;-~]*([^!-~]|$)"me=s-1 end="\v^\z1@!"me=s-1 end="\v^\z1(\> ?)+"me=s-1 fold ++ + " Usenet headers + syn match mailHeaderKey contained contains=mailHeaderEmail,mailEmail,@NoSpell "\v(^(\> ?)*)@<=(Newsgroups|Followup-To|Message-ID|Supersedes|Control):.*$" + +-syn case ignore +-" Nothing else depends on case. Headers in properly quoted (with "> " or ">") +-" emails are matched +-syn region mailHeader keepend contains=@mailHeaderFields,@mailQuoteExps,@NoSpell start="^\z(\(> \?\)*\)\v(newsgroups|x-([a-z\-])*|path|xref|message-id|from|((in-)?reply-)?to|b?cc|subject|return-path|received|date|replied):" skip="^\z1\s" end="\v^\z1[!-9;-~]*([^!-~]|$)"me=s-1 end="\v^\z1@!"me=s-1 end="\v^\z1(\> ?)+"me=s-1 + + syn region mailHeaderKey contained contains=mailHeaderEmail,mailEmail,@mailQuoteExps,@NoSpell start="\v(^(\> ?)*)@<=(to|b?cc):" skip=",$" end="$" +-syn match mailHeaderKey contained contains=mailHeaderEmail,mailEmail,@NoSpell "\v(^(\> ?)*)@<=(from|reply-to):.*$" ++syn match mailHeaderKey contained contains=mailHeaderEmail,mailEmail,@NoSpell "\v(^(\> ?)*)@<=(from|reply-to):.*$" fold + syn match mailHeaderKey contained contains=@NoSpell "\v(^(\> ?)*)@<=date:" +-syn match mailSubject contained "\v^subject:.*$" ++syn match mailSubject contained "\v^subject:.*$" fold + syn match mailSubject contained contains=@NoSpell "\v(^(\> ?)+)@<=subject:.*$" + + " Anything in the header between < and > is an email address + syn match mailHeaderEmail contained contains=@NoSpell "<.\{-}>" + + " Mail Signatures. (Begin with "-- ", end with change in quote level) +-syn region mailSignature keepend contains=@mailLinks,@mailQuoteExps start="^--\s$" end="^$" end="^\(> \?\)\+"me=s-1 +-syn region mailSignature keepend contains=@mailLinks,@mailQuoteExps,@NoSpell start="^\z(\(> \?\)\+\)--\s$" end="^\z1$" end="^\z1\@!"me=s-1 end="^\z1\(> \?\)\+"me=s-1 ++syn region mailSignature keepend contains=@mailLinks,@mailQuoteExps start="^--\s$" end="^$" end="^\(> \?\)\+"me=s-1 fold ++syn region mailSignature keepend contains=@mailLinks,@mailQuoteExps,@NoSpell start="^\z(\(> \?\)\+\)--\s$" end="^\z1$" end="^\z1\@!"me=s-1 end="^\z1\(> \?\)\+"me=s-1 fold ++ ++" Treat verbatim Text special. ++syn region mailVerbatim contains=@NoSpell keepend start="^#v+$" end="^#v-$" fold ++syn region mailVerbatim contains=@mailQuoteExps,@NoSpell start="^\z(\(> \?\)\+\)#v+$" end="\z1#v-$" fold + + " URLs start with a known protocol or www,web,w3. + syn match mailURL contains=@NoSpell `\v<(((https?|ftp|gopher)://|(mailto|file|news):)[^' <>"]+|(www|web|w3)[a-z0-9_-]*\.[a-z0-9._-]+\.[^' <>"]+)[a-z0-9/]` +@@ -59,13 +66,13 @@ + syn match mailQuoteExp5 contained "\v^(\> ?){5}" + syn match mailQuoteExp6 contained "\v^(\> ?){6}" + +-" Even and odd quoted lines. order is imporant here! +-syn match mailQuoted1 contains=mailHeader,@mailLinks,mailSignature,@NoSpell "^\([a-z]\+>\|[]|}>]\).*$" +-syn match mailQuoted2 contains=mailHeader,@mailLinks,mailSignature,@NoSpell "^\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{2}.*$" +-syn match mailQuoted3 contains=mailHeader,@mailLinks,mailSignature,@NoSpell "^\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{3}.*$" +-syn match mailQuoted4 contains=mailHeader,@mailLinks,mailSignature,@NoSpell "^\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{4}.*$" +-syn match mailQuoted5 contains=mailHeader,@mailLinks,mailSignature,@NoSpell "^\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{5}.*$" +-syn match mailQuoted6 contains=mailHeader,@mailLinks,mailSignature,@NoSpell "^\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{6}.*$" ++" Even and odd quoted lines. Order is important here! ++syn region mailQuoted6 keepend contains=mailVerbatim,mailHeader,@mailLinks,mailSignature,@NoSpell start="^\z(\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{5}\([a-z]\+>\|[]|}>]\)\)" end="^\z1\@!" fold ++syn region mailQuoted5 keepend contains=mailQuoted6,mailVerbatim,mailHeader,@mailLinks,mailSignature,@NoSpell start="^\z(\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{4}\([a-z]\+>\|[]|}>]\)\)" end="^\z1\@!" fold ++syn region mailQuoted4 keepend contains=mailQuoted5,mailQuoted6,mailVerbatim,mailHeader,@mailLinks,mailSignature,@NoSpell start="^\z(\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{3}\([a-z]\+>\|[]|}>]\)\)" end="^\z1\@!" fold ++syn region mailQuoted3 keepend contains=mailQuoted4,mailQuoted5,mailQuoted6,mailVerbatim,mailHeader,@mailLinks,mailSignature,@NoSpell start="^\z(\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{2}\([a-z]\+>\|[]|}>]\)\)" end="^\z1\@!" fold ++syn region mailQuoted2 keepend contains=mailQuoted3,mailQuoted4,mailQuoted5,mailQuoted6,mailVerbatim,mailHeader,@mailLinks,mailSignature,@NoSpell start="^\z(\(\([a-z]\+>\|[]|}>]\)[ \t]*\)\{1}\([a-z]\+>\|[]|}>]\)\)" end="^\z1\@!" fold ++syn region mailQuoted1 keepend contains=mailQuoted2,mailQuoted3,mailQuoted4,mailQuoted5,mailQuoted6,mailVerbatim,mailHeader,@mailLinks,mailSignature,@NoSpell start="^\z([a-z]\+>\|[]|}>]\)" end="^\z1\@!" fold + + " Need to sync on the header. Assume we can do that within 100 lines + if exists("mail_minlines") +@@ -75,6 +82,7 @@ + endif + + " Define the default highlighting. ++hi def link mailVerbatim Special + hi def link mailHeader Statement + hi def link mailHeaderKey Type + hi def link mailSignature PreProc +diff -u -r --new-file runtime/syntax.orig/man.vim runtime/syntax/man.vim +--- runtime/syntax.orig/man.vim 2007-12-30 07:19:15.000000000 -0600 ++++ runtime/syntax/man.vim 2008-09-18 13:56:38.000000000 -0500 +@@ -1,9 +1,9 @@ + " Vim syntax file + " Language: Man page +-" Maintainer: Nam SungHyun <namsh@kldp.org> ++" Maintainer: SungHyun Nam <goweol@gmail.com> + " Previous Maintainer: Gautam H. Mudunuri <gmudunur@informatica.com> + " Version Info: +-" Last Change: 2007 Dec 30 ++" Last Change: 2008 Sep 17 + + " Additional highlighting by Johannes Tanzler <johannes.tanzler@aon.at>: + " * manSubHeading +diff -u -r --new-file runtime/syntax.orig/matlab.vim runtime/syntax/matlab.vim +--- runtime/syntax.orig/matlab.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/matlab.vim 2010-01-16 07:33:01.000000000 -0600 +@@ -1,8 +1,10 @@ + " Vim syntax file + " Language: Matlab +-" Maintainer: Preben 'Peppe' Guldberg <peppe-vim@wielders.org> ++" Maintainer: Maurizio Tranchero - maurizio(.)tranchero(@)gmail(.)com ++" Credits: Preben 'Peppe' Guldberg <peppe-vim@wielders.org> + " Original author: Mario Eusebio +-" Last Change: 30 May 2003 ++" Last Change: Wed Jan 13 11:12:34 CET 2010 ++" - 'global' and 'persistent' keyword are now recognized + + " For version 5.x: Clear all syntax items + " For version 6.x: Quit when a syntax file was already loaded +@@ -16,8 +18,12 @@ + syn keyword matlabLabel case switch + syn keyword matlabConditional else elseif end if otherwise + syn keyword matlabRepeat do for while ++" MT_ADDON - added exception-specific keywords ++syn keyword matlabExceptions try catch ++syn keyword matlabOO classdef properties events methods + + syn keyword matlabTodo contained TODO ++syn keyword matlabScope global persistent + + " If you do not want these operators lit, uncommment them and the "hi link" below + syn match matlabArithmeticOperator "[-+]" +@@ -31,7 +37,8 @@ + "syn match matlabIdentifier "\<\a\w*\>" + + " String +-syn region matlabString start=+'+ end=+'+ oneline ++" MT_ADDON - added 'skip' in order to deal with 'tic' escaping sequence ++syn region matlabString start=+'+ end=+'+ oneline skip=+''+ + + " If you don't like tabs + syn match matlabTab "\t" +@@ -51,6 +58,9 @@ + syn match matlabSemicolon ";" + + syn match matlabComment "%.*$" contains=matlabTodo,matlabTab ++" MT_ADDON - correctly highlights words after '...' as comments ++syn match matlabComment "\.\.\..*$" contains=matlabTodo,matlabTab ++syn region matlabMultilineComment start=+%{+ end=+%}+ contains=matlabTodo,matlabTab + + syn keyword matlabOperator break zeros default margin round ones rand + syn keyword matlabOperator ceil floor size clear zeros eye mean std cov +@@ -75,10 +85,11 @@ + endif + + HiLink matlabTransposeOperator matlabOperator +- HiLink matlabOperator Operator +- HiLink matlabLineContinuation Special ++ HiLink matlabOperator Operator ++ HiLink matlabLineContinuation Special + HiLink matlabLabel Label + HiLink matlabConditional Conditional ++ HiLink matlabExceptions Conditional + HiLink matlabRepeat Repeat + HiLink matlabTodo Todo + HiLink matlabString String +@@ -86,12 +97,15 @@ + HiLink matlabTransposeOther Identifier + HiLink matlabNumber Number + HiLink matlabFloat Float +- HiLink matlabFunction Function ++ HiLink matlabFunction Function + HiLink matlabError Error +- HiLink matlabImplicit matlabStatement ++ HiLink matlabImplicit matlabStatement + HiLink matlabStatement Statement ++ HiLink matlabOO Statement + HiLink matlabSemicolon SpecialChar + HiLink matlabComment Comment ++ HiLink matlabMultilineComment Comment ++ HiLink matlabScope Type + + HiLink matlabArithmeticOperator matlabOperator + HiLink matlabRelationalOperator matlabOperator +diff -u -r --new-file runtime/syntax.orig/maxima.vim runtime/syntax/maxima.vim +--- runtime/syntax.orig/maxima.vim 2006-04-10 03:17:50.000000000 -0500 ++++ runtime/syntax/maxima.vim 2009-11-28 06:36:52.000000000 -0600 +@@ -227,7 +227,7 @@ + " Comments: + " maxima supports /* ... */ (like C) + syn keyword maximaTodo contained TODO Todo DEBUG +-syn region maximaCommentBlock start="/\*" end="\*/" contains=maximaString,maximaTodo ++syn region maximaCommentBlock start="/\*" end="\*/" contains=maximaString,maximaTodo,maximaCommentBlock + + " synchronizing + syn sync match maximaSyncComment grouphere maximaCommentBlock "/*" +diff -u -r --new-file runtime/syntax.orig/mysql.vim runtime/syntax/mysql.vim +--- runtime/syntax.orig/mysql.vim 2007-12-19 22:09:52.000000000 -0600 ++++ runtime/syntax/mysql.vim 2009-07-02 13:05:29.000000000 -0500 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: mysql + " Maintainer: Kenneth J. Pronovici <pronovic@ieee.org> +-" Last Change: $LastChangedDate: 2007-12-19 10:59:39 -0600 (Wed, 19 Dec 2007) $ ++" Last Change: $LastChangedDate: 2009-06-29 23:08:37 -0500 (Mon, 29 Jun 2009) $ + " Filenames: *.mysql + " URL: ftp://cedar-solutions.com/software/mysql.vim + " Note: The definitions below are taken from the mysql user manual as of April 2002, for version 3.23 +@@ -36,7 +36,7 @@ + syn keyword mysqlKeyword natural no + syn keyword mysqlKeyword on optimize option optionally order outer outfile + syn keyword mysqlKeyword pack_keys partial password primary privileges procedure process processlist +-syn keyword mysqlKeyword read references reload rename replace restrict returns revoke row rows ++syn keyword mysqlKeyword read references reload rename replace restrict returns revoke right row rows + syn keyword mysqlKeyword second select show shutdown soname sql_big_result sql_big_selects sql_big_tables sql_log_off + syn keyword mysqlKeyword sql_log_update sql_low_priority_updates sql_select_limit sql_small_result sql_warnings starting + syn keyword mysqlKeyword status straight_join string +@@ -57,7 +57,7 @@ + " Numbers and hexidecimal values + syn match mysqlNumber "-\=\<[0-9]*\>" + syn match mysqlNumber "-\=\<[0-9]*\.[0-9]*\>" +-syn match mysqlNumber "-\=\<[0-9]*e[+-]\=[0-9]*\>" ++syn match mysqlNumber "-\=\<[0-9][0-9]*e[+-]\=[0-9]*\>" + syn match mysqlNumber "-\=\<[0-9]*\.[0-9]*e[+-]\=[0-9]*\>" + syn match mysqlNumber "\<0x[abcdefABCDEF0-9]*\>" + +diff -u -r --new-file runtime/syntax.orig/netrc.vim runtime/syntax/netrc.vim +--- runtime/syntax.orig/netrc.vim 2006-04-21 07:39:13.000000000 -0500 ++++ runtime/syntax/netrc.vim 2010-01-12 14:39:39.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: netrc(5) configuration file + " Maintainer: Nikolai Weibull <now@bitwi.se> +-" Latest Revision: 2006-04-19 ++" Latest Revision: 2010-01-03 + + if exists("b:current_syntax") + finish +@@ -11,12 +11,13 @@ + set cpo&vim + + syn keyword netrcKeyword machine nextgroup=netrcMachine skipwhite skipnl +-syn keyword netrcKeyword login nextgroup=netrcLogin,netrcSpecial +- \ skipwhite skipnl ++syn keyword netrcKeyword account ++ \ login ++ \ nextgroup=netrcLogin,netrcSpecial skipwhite skipnl + syn keyword netrcKeyword password nextgroup=netrcPassword skipwhite skipnl + syn keyword netrcKeyword default +-syn keyword netrcKeyword macdef nextgroup=netrcInit,netrcMacroName +- \ skipwhite skipnl ++syn keyword netrcKeyword macdef ++ \ nextgroup=netrcInit,netrcMacroName skipwhite skipnl + syn region netrcMacro contained start='.' end='^$' + + syn match netrcMachine contained display '\S\+' +@@ -25,14 +26,14 @@ + syn match netrcLogin contained display '"[^\\"]*\(\\.[^\\"]*\)*"' + syn match netrcPassword contained display '\S\+' + syn match netrcPassword contained display '"[^\\"]*\(\\.[^\\"]*\)*"' +-syn match netrcMacroName contained display '\S\+' nextgroup=netrcMacro +- \ skipwhite skipnl ++syn match netrcMacroName contained display '\S\+' ++ \ nextgroup=netrcMacro skipwhite skipnl + syn match netrcMacroName contained display '"[^\\"]*\(\\.[^\\"]*\)*"' +- \ nextgroup=netrcMacro skipwhite skipnl ++ \ nextgroup=netrcMacro skipwhite skipnl + + syn keyword netrcSpecial contained anonymous +-syn match netrcInit contained '\<init$' nextgroup=netrcMacro +- \ skipwhite skipnl ++syn match netrcInit contained '\<init$' ++ \ nextgroup=netrcMacro skipwhite skipnl + + syn sync fromstart + +diff -u -r --new-file runtime/syntax.orig/netrw.vim runtime/syntax/netrw.vim +--- runtime/syntax.orig/netrw.vim 2008-03-28 13:35:41.000000000 -0500 ++++ runtime/syntax/netrw.vim 2010-01-12 14:33:53.000000000 -0600 +@@ -1,7 +1,7 @@ + " Language : Netrw Remote-Directory Listing Syntax + " Maintainer : Charles E. Campbell, Jr. +-" Last change: Feb 06, 2008 +-" Version : 12 ++" Last change: Jan 14, 2009 ++" Version : 16 + " --------------------------------------------------------------------- + + " Syntax Clearing: {{{1 +@@ -16,85 +16,91 @@ + syn cluster NetrwGroup contains=netrwHide,netrwSortBy,netrwSortSeq,netrwQuickHelp,netrwVersion,netrwCopyTgt + syn cluster NetrwTreeGroup contains=netrwDir,netrwSymLink,netrwExe + +-syn match netrwSpecial "\%(\S\+ \)*\S\+[*|=]\ze\%(\s\{2,}\|$\)" contains=netrwClassify +-syn match netrwDir "\.\{1,2}/" contains=netrwClassify +-syn match netrwDir "\%(\S\+ \)*\S\+/" contains=netrwClassify +-syn match netrwSizeDate "\<\d\+\s\d\{1,2}/\d\{1,2}/\d\{4}\s" contains=netrwDateSep skipwhite nextgroup=netrwTime +-syn match netrwSymLink "\%(\S\+ \)*\S\+@\ze\%(\s\{2,}\|$\)" contains=netrwClassify +-syn match netrwExe "\%(\S\+ \)*\S\+\*\ze\%(\s\{2,}\|$\)" contains=netrwClassify +-syn match netrwTreeBar "^\%(| \)*" contains=netrwTreeBarSpace nextgroup=@netrwTreeGroup +-syn match netrwTreeBarSpace " " contained +- +-syn match netrwClassify "[*=|@/]\ze\%(\s\{2,}\|$\)" contained +-syn match netrwDateSep "/" contained +-syn match netrwTime "\d\{1,2}:\d\{2}:\d\{2}" contained contains=netrwTimeSep ++syn match netrwPlain "\(\S\+ \)*\S\+" contains=@NoSpell ++syn match netrwSpecial "\%(\S\+ \)*\S\+[*|=]\ze\%(\s\{2,}\|$\)" contains=netrwClassify,@NoSpell ++syn match netrwDir "\.\{1,2}/" contains=netrwClassify,@NoSpell ++syn match netrwDir "\%(\S\+ \)*\S\+/" contains=netrwClassify,@NoSpell ++syn match netrwSizeDate "\<\d\+\s\d\{1,2}/\d\{1,2}/\d\{4}\s" skipwhite contains=netrwDateSep,@NoSpell nextgroup=netrwTime ++syn match netrwSymLink "\%(\S\+ \)*\S\+@\ze\%(\s\{2,}\|$\)" contains=netrwClassify,@NoSpell ++syn match netrwExe "\%(\S\+ \)*\S\+\*\ze\%(\s\{2,}\|$\)" contains=netrwClassify,@NoSpell ++syn match netrwTreeBar "^\%([-+|] \)\+" contains=netrwTreeBarSpace nextgroup=@netrwTreeGroup ++syn match netrwTreeBarSpace " " contained ++ ++syn match netrwClassify "[*=|@/]\ze\%(\s\{2,}\|$\)" contained ++syn match netrwDateSep "/" contained ++syn match netrwTime "\d\{1,2}:\d\{2}:\d\{2}" contained contains=netrwTimeSep + syn match netrwTimeSep ":" + +-syn match netrwComment '".*\%(\t\|$\)' contains=@NetrwGroup +-syn match netrwHide '^"\s*\(Hid\|Show\)ing:' skipwhite nextgroup=netrwHidePat ++syn match netrwComment '".*\%(\t\|$\)' contains=@NetrwGroup,@NoSpell ++syn match netrwHide '^"\s*\(Hid\|Show\)ing:' skipwhite contains=@NoSpell nextgroup=netrwHidePat + syn match netrwSlash "/" contained +-syn match netrwHidePat "[^,]\+" contained skipwhite nextgroup=netrwHideSep +-syn match netrwHideSep "," contained transparent skipwhite nextgroup=netrwHidePat +-syn match netrwSortBy "Sorted by" contained transparent skipwhite nextgroup=netrwList +-syn match netrwSortSeq "Sort sequence:" contained transparent skipwhite nextgroup=netrwList +-syn match netrwCopyTgt "Copy/Move Tgt:" contained transparent skipwhite nextgroup=netrwList +-syn match netrwList ".*$" contained contains=netrwComma ++syn match netrwHidePat "[^,]\+" contained skipwhite contains=@NoSpell nextgroup=netrwHideSep ++syn match netrwHideSep "," contained skipwhite nextgroup=netrwHidePat ++syn match netrwSortBy "Sorted by" contained transparent skipwhite nextgroup=netrwList ++syn match netrwSortSeq "Sort sequence:" contained transparent skipwhite nextgroup=netrwList ++syn match netrwCopyTgt "Copy/Move Tgt:" contained transparent skipwhite nextgroup=netrwList ++syn match netrwList ".*$" contained contains=netrwComma,@NoSpell + syn match netrwComma "," contained +-syn region netrwQuickHelp matchgroup=Comment start="Quick Help:\s\+" end="$" contains=netrwHelpCmd keepend contained +-syn match netrwHelpCmd "\S\ze:" contained skipwhite nextgroup=netrwCmdSep ++syn region netrwQuickHelp matchgroup=Comment start="Quick Help:\s\+" end="$" contains=netrwHelpCmd,@NoSpell keepend contained ++syn match netrwHelpCmd "\S\ze:" contained skipwhite contains=@NoSpell nextgroup=netrwCmdSep + syn match netrwCmdSep ":" contained nextgroup=netrwCmdNote +-syn match netrwCmdNote ".\{-}\ze " contained +-syn match netrwVersion "(netrw.*)" contained ++syn match netrwCmdNote ".\{-}\ze " contained contains=@NoSpell ++syn match netrwVersion "(netrw.*)" contained contains=@NoSpell + + " ----------------------------- + " Special filetype highlighting {{{1 + " ----------------------------- + if exists("g:netrw_special_syntax") && netrw_special_syntax +- syn match netrwBak "\(\S\+ \)*\S\+\.bak\>" contains=netrwTreeBar +- syn match netrwCompress "\(\S\+ \)*\S\+\.\%(gz\|bz2\|Z\|zip\)\>" contains=netrwTreeBar +- syn match netrwData "\(\S\+ \)*\S\+\.dat\>" contains=netrwTreeBar +- syn match netrwHdr "\(\S\+ \)*\S\+\.h\>" contains=netrwTreeBar +- syn match netrwLib "\(\S\+ \)*\S*\.\%(a\|so\|lib\|dll\)\>" contains=netrwTreeBar +- syn match netrwMakeFile "\<[mM]akefile\>\|\(\S\+ \)*\S\+\.mak\>" contains=netrwTreeBar +- syn match netrwObj "\(\S\+ \)*\S*\.\%(o\|obj\)\>" contains=netrwTreeBar +- syn match netrwTags "\<tags\>" contains=netrwTreeBar +- syn match netrwTags "\<\(ANmenu\|ANtags\)\>" contains=netrwTreeBar +- syn match netrwTilde "\(\S\+ \)*\S\+\~\>" contains=netrwTreeBar +- syn match netrwTmp "\<tmp\(\S\+ \)*\S\+\>\|\(\S\+ \)*\S*tmp\>" contains=netrwTreeBar ++ syn match netrwBak "\(\S\+ \)*\S\+\.bak\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwCompress "\(\S\+ \)*\S\+\.\%(gz\|bz2\|Z\|zip\)\>" contains=netrwTreeBar,@NoSpell ++ if has("unix") ++ syn match netrwCoreDump "\<core\%(\.\d\+\)\=\>" contains=netrwTreeBar,@NoSpell ++ endif ++ syn match netrwData "\(\S\+ \)*\S\+\.dat\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwHdr "\(\S\+ \)*\S\+\.h\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwLib "\(\S\+ \)*\S*\.\%(a\|so\|lib\|dll\)\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwMakeFile "\<[mM]akefile\>\|\(\S\+ \)*\S\+\.mak\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwObj "\(\S\+ \)*\S*\.\%(o\|obj\)\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwTags "\<tags\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwTags "\<\(ANmenu\|ANtags\)\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwTilde "\(\S\+ \)*\S\+\~\>" contains=netrwTreeBar,@NoSpell ++ syn match netrwTmp "\<tmp\(\S\+ \)*\S\+\>\|\(\S\+ \)*\S*tmp\>" contains=netrwTreeBar,@NoSpell + endif + + " --------------------------------------------------------------------- + " Highlighting Links: {{{1 + if !exists("did_drchip_netrwlist_syntax") + let did_drchip_netrwlist_syntax= 1 +- hi link netrwClassify Function +- hi link netrwCmdSep Delimiter +- hi link netrwComment Comment +- hi link netrwDir Directory +- hi link netrwHelpCmd Function +- hi link netrwHidePat Statement +- hi link netrwList Statement +- hi link netrwVersion Identifier +- hi link netrwSymLink Question +- hi link netrwExe PreProc +- hi link netrwDateSep Delimiter +- +- hi link netrwTreeBar Special +- hi link netrwTimeSep netrwDateSep +- hi link netrwComma netrwComment +- hi link netrwHide netrwComment +- hi link netrwMarkFile Identifier ++ hi default link netrwClassify Function ++ hi default link netrwCmdSep Delimiter ++ hi default link netrwComment Comment ++ hi default link netrwDir Directory ++ hi default link netrwHelpCmd Function ++ hi default link netrwHidePat Statement ++ hi default link netrwHideSep netrwComment ++ hi default link netrwList Statement ++ hi default link netrwVersion Identifier ++ hi default link netrwSymLink Question ++ hi default link netrwExe PreProc ++ hi default link netrwDateSep Delimiter ++ ++ hi default link netrwTreeBar Special ++ hi default link netrwTimeSep netrwDateSep ++ hi default link netrwComma netrwComment ++ hi default link netrwHide netrwComment ++ hi default link netrwMarkFile Identifier + + " special syntax highlighting (see :he g:netrw_special_syntax) +- hi link netrwBak NonText +- hi link netrwCompress Folded +- hi link netrwData DiffChange +- hi link netrwLib DiffChange +- hi link netrwMakefile DiffChange +- hi link netrwObj Folded +- hi link netrwTilde Folded +- hi link netrwTmp Folded +- hi link netrwTags Folded ++ hi default link netrwBak NonText ++ hi default link netrwCompress Folded ++ hi default link netrwCoreDump WarningMsg ++ hi default link netrwData DiffChange ++ hi default link netrwLib DiffChange ++ hi default link netrwMakefile DiffChange ++ hi default link netrwObj Folded ++ hi default link netrwTilde Folded ++ hi default link netrwTmp Folded ++ hi default link netrwTags Folded + endif + + " Current Syntax: {{{1 +diff -u -r --new-file runtime/syntax.orig/papp.vim runtime/syntax/papp.vim +--- runtime/syntax.orig/papp.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/papp.vim 2009-11-28 06:31:38.000000000 -0600 +@@ -2,7 +2,7 @@ + " + " Language: papp + " Maintainer: Marc Lehmann <pcg@goof.com> +-" Last Change: 2003 May 11 ++" Last Change: 2009 Nov 11 + " Filenames: *.papp *.pxml *.pxsl + " URL: http://papp.plan9.de/ + +@@ -37,6 +37,7 @@ + syn include @PAppHtml syntax/html.vim + endif + unlet b:current_syntax ++ syntax spell default " added by Bram + endif + + if version < 600 +diff -u -r --new-file runtime/syntax.orig/po.vim runtime/syntax/po.vim +--- runtime/syntax.orig/po.vim 2008-06-15 06:29:12.000000000 -0500 ++++ runtime/syntax/po.vim 2008-09-18 13:56:38.000000000 -0500 +@@ -1,10 +1,10 @@ + " Vim syntax file + " Language: po (gettext) + " Maintainer: Dwayne Bailey <dwayne@translate.org.za> +-" Last Change: 2008 Jan 08 ++" Last Change: 2008 Sep 17 + " Contributors: Dwayne Bailey (Most advanced syntax highlighting) + " Leonardo Fontenelle (Spell checking) +-" Nam SungHyun <namsh@kldp.org> (Original maintainer) ++" SungHyun Nam <goweol@gmail.com> (Original maintainer) + + " For version 5.x: Clear all syntax items + " For version 6.x: Quit when a syntax file was already loaded +diff -u -r --new-file runtime/syntax.orig/prolog.vim runtime/syntax/prolog.vim +--- runtime/syntax.orig/prolog.vim 2008-05-04 14:21:09.000000000 -0500 ++++ runtime/syntax/prolog.vim 2009-12-16 14:38:21.000000000 -0600 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: PROLOG + " Maintainers: Thomas Koehler <jean-luc@picard.franken.de> +-" Last Change: 2008 April 5 +-" URL: http://gott-gehabt/800_wer_wir_sind/thomas/Homepage/Computer/vim/syntax/prolog.vim ++" Last Change: 2009 Dec 04 ++" URL: http://gott-gehabt.de/800_wer_wir_sind/thomas/Homepage/Computer/vim/syntax/prolog.vim + + " There are two sets of highlighting in here: + " If the "prolog_highlighting_clean" variable exists, it is rather sparse. +@@ -63,7 +63,7 @@ + syn match prologOperator "=\\=\|=:=\|\\==\|=<\|==\|>=\|\\=\|\\+\|<\|>\|=" + syn match prologAsIs "===\|\\===\|<=\|=>" + +- syn match prologNumber "\<[0123456789]*\>" ++ syn match prologNumber "\<[0123456789]*\>'\@!" + syn match prologCommentError "\*/" + syn match prologSpecialCharacter ";" + syn match prologSpecialCharacter "!" +diff -u -r --new-file runtime/syntax.orig/pyrex.vim runtime/syntax/pyrex.vim +--- runtime/syntax.orig/pyrex.vim 2004-06-07 09:32:36.000000000 -0500 ++++ runtime/syntax/pyrex.vim 2009-11-28 06:31:38.000000000 -0600 +@@ -2,7 +2,7 @@ + " Language: Pyrex + " Maintainer: Marco Barisione <marco.bari@people.it> + " URL: http://marcobari.altervista.org/pyrex_vim.html +-" Last Change: 2004 May 16 ++" Last Change: 2009 Nov 09 + + " For version 5.x: Clear all syntax items + " For version 6.x: Quit when a syntax file was already loaded +@@ -25,7 +25,7 @@ + syn keyword pyrexType int long short float double char object void + syn keyword pyrexType signed unsigned + syn keyword pyrexStructure struct union enum +-syn keyword pyrexPrecondit include cimport ++syn keyword pyrexInclude include cimport + syn keyword pyrexAccess public private property readonly extern + " If someome wants Python's built-ins highlighted probably he + " also wants Pyrex's built-ins highlighted +@@ -35,9 +35,9 @@ + + " This deletes "from" from the keywords and re-adds it as a + " match with lower priority than pyrexForFrom +-syn clear pythonPreCondit +-syn keyword pythonPreCondit import +-syn match pythonPreCondit "from" ++syn clear pythonInclude ++syn keyword pythonInclude import ++syn match pythonInclude "from" + + " With "for[^:]*\zsfrom" VIM does not match "for" anymore, so + " I used the slower "\@<=" form +@@ -54,7 +54,7 @@ + HiLink pyrexStatement Statement + HiLink pyrexType Type + HiLink pyrexStructure Structure +- HiLink pyrexPrecondit PreCondit ++ HiLink pyrexInclude PreCondit + HiLink pyrexAccess pyrexStatement + if exists("python_highlight_builtins") || exists("pyrex_highlight_builtins") + HiLink pyrexBuiltin Function +diff -u -r --new-file runtime/syntax.orig/python.vim runtime/syntax/python.vim +--- runtime/syntax.orig/python.vim 2006-10-15 16:04:19.000000000 -0500 ++++ runtime/syntax/python.vim 2009-10-28 15:56:59.000000000 -0500 +@@ -1,143 +1,252 @@ + " Vim syntax file + " Language: Python + " Maintainer: Neil Schemenauer <nas@python.ca> +-" Updated: 2006-10-15 +-" Added Python 2.4 features 2006 May 4 (Dmitry Vasiliev) ++" Last Change: 2009-10-13 ++" Credits: Zvezdan Petkovic <zpetkovic@acm.org> ++" Neil Schemenauer <nas@python.ca> ++" Dmitry Vasiliev + " +-" Options to control Python syntax highlighting: ++" This version is a major rewrite by Zvezdan Petkovic. + " +-" For highlighted numbers: ++" - introduced highlighting of doctests ++" - updated keywords, built-ins, and exceptions ++" - corrected regular expressions for + " +-" let python_highlight_numbers = 1 ++" * functions ++" * decorators ++" * strings ++" * escapes ++" * numbers ++" * space error + " +-" For highlighted builtin functions: ++" - corrected synchronization ++" - more highlighting is ON by default, except ++" - space error highlighting is OFF by default + " +-" let python_highlight_builtins = 1 ++" Optional highlighting can be controlled using these variables. + " +-" For highlighted standard exceptions: ++" let python_no_builtin_highlight = 1 ++" let python_no_doctest_code_highlight = 1 ++" let python_no_doctest_highlight = 1 ++" let python_no_exception_highlight = 1 ++" let python_no_number_highlight = 1 ++" let python_space_error_highlight = 1 + " +-" let python_highlight_exceptions = 1 ++" All the options above can be switched on together. + " +-" Highlight erroneous whitespace: +-" +-" let python_highlight_space_errors = 1 +-" +-" If you want all possible Python highlighting (the same as setting the +-" preceding options): +-" +-" let python_highlight_all = 1 ++" let python_highlight_all = 1 + " + +-" For version 5.x: Clear all syntax items +-" For version 6.x: Quit when a syntax file was already loaded ++" For version 5.x: Clear all syntax items. ++" For version 6.x: Quit when a syntax file was already loaded. + if version < 600 + syntax clear + elseif exists("b:current_syntax") + finish + endif + +- +-syn keyword pythonStatement break continue del +-syn keyword pythonStatement except exec finally +-syn keyword pythonStatement pass print raise +-syn keyword pythonStatement return try with +-syn keyword pythonStatement global assert +-syn keyword pythonStatement lambda yield +-syn keyword pythonStatement def class nextgroup=pythonFunction skipwhite +-syn match pythonFunction "[a-zA-Z_][a-zA-Z0-9_]*" contained ++" Keep Python keywords in alphabetical order inside groups for easy ++" comparison with the table in the 'Python Language Reference' ++" http://docs.python.org/reference/lexical_analysis.html#keywords. ++" Groups are in the order presented in NAMING CONVENTIONS in syntax.txt. ++" Exceptions come last at the end of each group (class and def below). ++" ++" Keywords 'with' and 'as' are new in Python 2.6 ++" (use 'from __future__ import with_statement' in Python 2.5). ++" ++" Some compromises had to be made to support both Python 3.0 and 2.6. ++" We include Python 3.0 features, but when a definition is duplicated, ++" the last definition takes precedence. ++" ++" - 'False', 'None', and 'True' are keywords in Python 3.0 but they are ++" built-ins in 2.6 and will be highlighted as built-ins below. ++" - 'exec' is a built-in in Python 3.0 and will be highlighted as ++" built-in below. ++" - 'nonlocal' is a keyword in Python 3.0 and will be highlighted. ++" - 'print' is a built-in in Python 3.0 and will be highlighted as ++" built-in below (use 'from __future__ import print_function' in 2.6) ++" ++syn keyword pythonStatement False, None, True ++syn keyword pythonStatement as assert break continue del exec global ++syn keyword pythonStatement lambda nonlocal pass print return with yield ++syn keyword pythonStatement class def nextgroup=pythonFunction skipwhite ++syn keyword pythonConditional elif else if + syn keyword pythonRepeat for while +-syn keyword pythonConditional if elif else + syn keyword pythonOperator and in is not or +-" AS will be a keyword in Python 3 +-syn keyword pythonPreCondit import from as +-syn match pythonComment "#.*$" contains=pythonTodo,@Spell +-syn keyword pythonTodo TODO FIXME XXX contained ++syn keyword pythonException except finally raise try ++syn keyword pythonInclude from import + + " Decorators (new in Python 2.4) + syn match pythonDecorator "@" display nextgroup=pythonFunction skipwhite ++" The zero-length non-grouping match before the function name is ++" extremely important in pythonFunction. Without it, everything is ++" interpreted as a function inside the contained environment of ++" doctests. ++" A dot must be allowed because of @MyClass.myfunc decorators. ++syn match pythonFunction ++ \ "\%(\%(def\s\|class\s\|@\)\s*\)\@<=\h\%(\w\|\.\)*" contained ++ ++syn match pythonComment "#.*$" contains=pythonTodo,@Spell ++syn keyword pythonTodo FIXME NOTE NOTES TODO XXX contained + +-" strings +-syn region pythonString matchgroup=Normal start=+[uU]\='+ end=+'+ skip=+\\\\\|\\'+ contains=pythonEscape,@Spell +-syn region pythonString matchgroup=Normal start=+[uU]\="+ end=+"+ skip=+\\\\\|\\"+ contains=pythonEscape,@Spell +-syn region pythonString matchgroup=Normal start=+[uU]\="""+ end=+"""+ contains=pythonEscape,@Spell +-syn region pythonString matchgroup=Normal start=+[uU]\='''+ end=+'''+ contains=pythonEscape,@Spell +-syn region pythonRawString matchgroup=Normal start=+[uU]\=[rR]'+ end=+'+ skip=+\\\\\|\\'+ contains=@Spell +-syn region pythonRawString matchgroup=Normal start=+[uU]\=[rR]"+ end=+"+ skip=+\\\\\|\\"+ contains=@Spell +-syn region pythonRawString matchgroup=Normal start=+[uU]\=[rR]"""+ end=+"""+ contains=@Spell +-syn region pythonRawString matchgroup=Normal start=+[uU]\=[rR]'''+ end=+'''+ contains=@Spell +-syn match pythonEscape +\\[abfnrtv'"\\]+ contained +-syn match pythonEscape "\\\o\{1,3}" contained +-syn match pythonEscape "\\x\x\{2}" contained +-syn match pythonEscape "\(\\u\x\{4}\|\\U\x\{8}\)" contained +-syn match pythonEscape "\\$" ++" Triple-quoted strings can contain doctests. ++syn region pythonString ++ \ start=+[uU]\=\z(['"]\)+ end="\z1" skip="\\\\\|\\\z1" ++ \ contains=pythonEscape,@Spell ++syn region pythonString ++ \ start=+[uU]\=\z('''\|"""\)+ end="\z1" keepend ++ \ contains=pythonEscape,pythonSpaceError,pythonDoctest,@Spell ++syn region pythonRawString ++ \ start=+[uU]\=[rR]\z(['"]\)+ end="\z1" skip="\\\\\|\\\z1" ++ \ contains=@Spell ++syn region pythonRawString ++ \ start=+[uU]\=[rR]\z('''\|"""\)+ end="\z1" keepend ++ \ contains=pythonSpaceError,pythonDoctest,@Spell ++ ++syn match pythonEscape +\\[abfnrtv'"\\]+ contained ++syn match pythonEscape "\\\o\{1,3}" contained ++syn match pythonEscape "\\x\x\{2}" contained ++syn match pythonEscape "\%(\\u\x\{4}\|\\U\x\{8}\)" contained ++" Python allows case-insensitive Unicode IDs: http://www.unicode.org/charts/ ++syn match pythonEscape "\\N{\a\+\%(\s\a\+\)*}" contained ++syn match pythonEscape "\\$" + + if exists("python_highlight_all") +- let python_highlight_numbers = 1 +- let python_highlight_builtins = 1 +- let python_highlight_exceptions = 1 +- let python_highlight_space_errors = 1 ++ if exists("python_no_builtin_highlight") ++ unlet python_no_builtin_highlight ++ endif ++ if exists("python_no_doctest_code_highlight") ++ unlet python_no_doctest_code_highlight ++ endif ++ if exists("python_no_doctest_highlight") ++ unlet python_no_doctest_highlight ++ endif ++ if exists("python_no_exception_highlight") ++ unlet python_no_exception_highlight ++ endif ++ if exists("python_no_number_highlight") ++ unlet python_no_number_highlight ++ endif ++ let python_space_error_highlight = 1 + endif + +-if exists("python_highlight_numbers") ++" It is very important to understand all details before changing the ++" regular expressions below or their order. ++" The word boundaries are *not* the floating-point number boundaries ++" because of a possible leading or trailing decimal point. ++" The expressions below ensure that all valid number literals are ++" highlighted, and invalid number literals are not. For example, ++" ++" - a decimal point in '4.' at the end of a line is highlighted, ++" - a second dot in 1.0.0 is not highlighted, ++" - 08 is not highlighted, ++" - 08e0 or 08j are highlighted, ++" ++" and so on, as specified in the 'Python Language Reference'. ++" http://docs.python.org/reference/lexical_analysis.html#numeric-literals ++if !exists("python_no_number_highlight") + " numbers (including longs and complex) +- syn match pythonNumber "\<0x\x\+[Ll]\=\>" +- syn match pythonNumber "\<\d\+[LljJ]\=\>" +- syn match pythonNumber "\.\d\+\([eE][+-]\=\d\+\)\=[jJ]\=\>" +- syn match pythonNumber "\<\d\+\.\([eE][+-]\=\d\+\)\=[jJ]\=\>" +- syn match pythonNumber "\<\d\+\.\d\+\([eE][+-]\=\d\+\)\=[jJ]\=\>" +-endif +- +-if exists("python_highlight_builtins") +- " builtin functions, types and objects, not really part of the syntax +- syn keyword pythonBuiltin True False bool enumerate set frozenset help +- syn keyword pythonBuiltin reversed sorted sum +- syn keyword pythonBuiltin Ellipsis None NotImplemented __import__ abs +- syn keyword pythonBuiltin apply buffer callable chr classmethod cmp +- syn keyword pythonBuiltin coerce compile complex delattr dict dir divmod +- syn keyword pythonBuiltin eval execfile file filter float getattr globals +- syn keyword pythonBuiltin hasattr hash hex id input int intern isinstance +- syn keyword pythonBuiltin issubclass iter len list locals long map max +- syn keyword pythonBuiltin min object oct open ord pow property range +- syn keyword pythonBuiltin raw_input reduce reload repr round setattr +- syn keyword pythonBuiltin slice staticmethod str super tuple type unichr +- syn keyword pythonBuiltin unicode vars xrange zip +-endif +- +-if exists("python_highlight_exceptions") +- " builtin exceptions and warnings +- syn keyword pythonException ArithmeticError AssertionError AttributeError +- syn keyword pythonException DeprecationWarning EOFError EnvironmentError +- syn keyword pythonException Exception FloatingPointError IOError +- syn keyword pythonException ImportError IndentationError IndexError +- syn keyword pythonException KeyError KeyboardInterrupt LookupError +- syn keyword pythonException MemoryError NameError NotImplementedError +- syn keyword pythonException OSError OverflowError OverflowWarning +- syn keyword pythonException ReferenceError RuntimeError RuntimeWarning +- syn keyword pythonException StandardError StopIteration SyntaxError +- syn keyword pythonException SyntaxWarning SystemError SystemExit TabError +- syn keyword pythonException TypeError UnboundLocalError UnicodeError +- syn keyword pythonException UnicodeEncodeError UnicodeDecodeError +- syn keyword pythonException UnicodeTranslateError +- syn keyword pythonException UserWarning ValueError Warning WindowsError +- syn keyword pythonException ZeroDivisionError ++ syn match pythonNumber "\<0[oO]\=\o\+[Ll]\=\>" ++ syn match pythonNumber "\<0[xX]\x\+[Ll]\=\>" ++ syn match pythonNumber "\<0[bB][01]\+[Ll]\=\>" ++ syn match pythonNumber "\<\%([1-9]\d*\|0\)[Ll]\=\>" ++ syn match pythonNumber "\<\d\+[jJ]\>" ++ syn match pythonNumber "\<\d\+[eE][+-]\=\d\+[jJ]\=\>" ++ syn match pythonNumber ++ \ "\<\d\+\.\%([eE][+-]\=\d\+\)\=[jJ]\=\%(\W\|$\)\@=" ++ syn match pythonNumber ++ \ "\%(^\|\W\)\@<=\d*\.\d\+\%([eE][+-]\=\d\+\)\=[jJ]\=\>" ++endif ++ ++" Group the built-ins in the order in the 'Python Library Reference' for ++" easier comparison. ++" http://docs.python.org/library/constants.html ++" http://docs.python.org/library/functions.html ++" http://docs.python.org/library/functions.html#non-essential-built-in-functions ++" Python built-in functions are in alphabetical order. ++if !exists("python_no_builtin_highlight") ++ " built-in constants ++ " 'False', 'True', and 'None' are also reserved words in Python 3.0 ++ syn keyword pythonBuiltin False True None ++ syn keyword pythonBuiltin NotImplemented Ellipsis __debug__ ++ " built-in functions ++ syn keyword pythonBuiltin abs all any bin bool chr classmethod ++ syn keyword pythonBuiltin compile complex delattr dict dir divmod ++ syn keyword pythonBuiltin enumerate eval filter float format ++ syn keyword pythonBuiltin frozenset getattr globals hasattr hash ++ syn keyword pythonBuiltin help hex id input int isinstance ++ syn keyword pythonBuiltin issubclass iter len list locals map max ++ syn keyword pythonBuiltin min next object oct open ord pow print ++ syn keyword pythonBuiltin property range repr reversed round set ++ syn keyword pythonBuiltin setattr slice sorted staticmethod str ++ syn keyword pythonBuiltin sum super tuple type vars zip __import__ ++ " Python 2.6 only ++ syn keyword pythonBuiltin basestring callable cmp execfile file ++ syn keyword pythonBuiltin long raw_input reduce reload unichr ++ syn keyword pythonBuiltin unicode xrange ++ " Python 3.0 only ++ syn keyword pythonBuiltin ascii bytearray bytes exec memoryview ++ " non-essential built-in functions; Python 2.6 only ++ syn keyword pythonBuiltin apply buffer coerce intern ++endif ++ ++" From the 'Python Library Reference' class hierarchy at the bottom. ++" http://docs.python.org/library/exceptions.html ++if !exists("python_no_exception_highlight") ++ " builtin base exceptions (only used as base classes for other exceptions) ++ syn keyword pythonExceptions BaseException Exception ++ syn keyword pythonExceptions ArithmeticError EnvironmentError ++ syn keyword pythonExceptions LookupError ++ " builtin base exception removed in Python 3.0 ++ syn keyword pythonExceptions StandardError ++ " builtin exceptions (actually raised) ++ syn keyword pythonExceptions AssertionError AttributeError BufferError ++ syn keyword pythonExceptions EOFError FloatingPointError GeneratorExit ++ syn keyword pythonExceptions IOError ImportError IndentationError ++ syn keyword pythonExceptions IndexError KeyError KeyboardInterrupt ++ syn keyword pythonExceptions MemoryError NameError NotImplementedError ++ syn keyword pythonExceptions OSError OverflowError ReferenceError ++ syn keyword pythonExceptions RuntimeError StopIteration SyntaxError ++ syn keyword pythonExceptions SystemError SystemExit TabError TypeError ++ syn keyword pythonExceptions UnboundLocalError UnicodeError ++ syn keyword pythonExceptions UnicodeDecodeError UnicodeEncodeError ++ syn keyword pythonExceptions UnicodeTranslateError ValueError VMSError ++ syn keyword pythonExceptions WindowsError ZeroDivisionError ++ " builtin warnings ++ syn keyword pythonExceptions BytesWarning DeprecationWarning FutureWarning ++ syn keyword pythonExceptions ImportWarning PendingDeprecationWarning ++ syn keyword pythonExceptions RuntimeWarning SyntaxWarning UnicodeWarning ++ syn keyword pythonExceptions UserWarning Warning + endif + +-if exists("python_highlight_space_errors") ++if exists("python_space_error_highlight") + " trailing whitespace +- syn match pythonSpaceError display excludenl "\S\s\+$"ms=s+1 ++ syn match pythonSpaceError display excludenl "\s\+$" + " mixed tabs and spaces +- syn match pythonSpaceError display " \+\t" +- syn match pythonSpaceError display "\t\+ " ++ syn match pythonSpaceError display " \+\t" ++ syn match pythonSpaceError display "\t\+ " + endif + +-" This is fast but code inside triple quoted strings screws it up. It +-" is impossible to fix because the only way to know if you are inside a +-" triple quoted string is to start from the beginning of the file. If +-" you have a fast machine you can try uncommenting the "sync minlines" +-" and commenting out the rest. +-syn sync match pythonSync grouphere NONE "):$" +-syn sync maxlines=200 +-"syn sync minlines=2000 ++" Do not spell doctests inside strings. ++" Notice that the end of a string, either ''', or """, will end the contained ++" doctest too. Thus, we do *not* need to have it as an end pattern. ++if !exists("python_no_doctest_highlight") ++ if !exists("python_no_doctest_code_higlight") ++ syn region pythonDoctest ++ \ start="^\s*>>>\s" end="^\s*$" ++ \ contained contains=ALLBUT,pythonDoctest,@Spell ++ syn region pythonDoctestValue ++ \ start=+^\s*\%(>>>\s\|\.\.\.\s\|"""\|'''\)\@!\S\++ end="$" ++ \ contained ++ else ++ syn region pythonDoctest ++ \ start="^\s*>>>" end="^\s*$" ++ \ contained contains=@NoSpell ++ endif ++endif ++ ++" Sync at the beginning of class, function, or method definition. ++syn sync match pythonSync grouphere NONE "^\s*\%(def\|class\)\s\+\h\w*\s*(" + + if version >= 508 || !exists("did_python_syn_inits") + if version <= 508 +@@ -147,35 +256,40 @@ + command -nargs=+ HiLink hi def link <args> + endif + +- " The default methods for highlighting. Can be overridden later ++ " The default highlight links. Can be overridden later. + HiLink pythonStatement Statement +- HiLink pythonFunction Function + HiLink pythonConditional Conditional + HiLink pythonRepeat Repeat +- HiLink pythonString String +- HiLink pythonRawString String +- HiLink pythonEscape Special + HiLink pythonOperator Operator +- HiLink pythonPreCondit PreCondit ++ HiLink pythonException Exception ++ HiLink pythonInclude Include ++ HiLink pythonDecorator Define ++ HiLink pythonFunction Function + HiLink pythonComment Comment + HiLink pythonTodo Todo +- HiLink pythonDecorator Define +- if exists("python_highlight_numbers") +- HiLink pythonNumber Number ++ HiLink pythonString String ++ HiLink pythonRawString String ++ HiLink pythonEscape Special ++ if !exists("python_no_number_highlight") ++ HiLink pythonNumber Number + endif +- if exists("python_highlight_builtins") ++ if !exists("python_no_builtin_highlight") + HiLink pythonBuiltin Function + endif +- if exists("python_highlight_exceptions") +- HiLink pythonException Exception ++ if !exists("python_no_exception_highlight") ++ HiLink pythonExceptions Structure + endif +- if exists("python_highlight_space_errors") ++ if exists("python_space_error_highlight") + HiLink pythonSpaceError Error + endif ++ if !exists("python_no_doctest_highlight") ++ HiLink pythonDoctest Special ++ HiLink pythonDoctestValue Define ++ endif + + delcommand HiLink + endif + + let b:current_syntax = "python" + +-" vim: ts=8 ++" vim:set sw=2 sts=2 ts=8 noet: +diff -u -r --new-file runtime/syntax.orig/readline.vim runtime/syntax/readline.vim +--- runtime/syntax.orig/readline.vim 2007-06-17 10:03:20.000000000 -0500 ++++ runtime/syntax/readline.vim 2009-06-13 07:38:40.000000000 -0500 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: readline(3) configuration file + " Maintainer: Nikolai Weibull <now@bitwi.se> +-" Latest Revision: 2007-06-17 ++" Latest Revision: 2009-05-25 + " readline_has_bash - if defined add support for bash specific + " settings/functions + +@@ -128,6 +128,7 @@ + \ arrow-key-prefix vi-back-to-indent vi-bword + \ vi-bWord vi-eword vi-eWord vi-fword vi-fWord + \ vi-next-word ++ \ vi-movement-mode + + if exists("readline_has_bash") + syn keyword readlineFunctions contained +diff -u -r --new-file runtime/syntax.orig/remind.vim runtime/syntax/remind.vim +--- runtime/syntax.orig/remind.vim 2006-05-12 12:55:59.000000000 -0500 ++++ runtime/syntax/remind.vim 2009-10-08 16:18:08.000000000 -0500 +@@ -1,12 +1,13 @@ + " Vim syntax file + " Language: Remind + " Maintainer: Davide Alberani <alberanid@libero.it> +-" Last Change: 10 May 2006 +-" Version: 0.3 ++" Last Change: 18 Sep 2009 ++" Version: 0.5 + " URL: http://erlug.linux.it/~da/vim/syntax/remind.vim + " +-" remind is a sophisticated reminder service; you can download remind from: +-" http://www.roaringpenguin.com/penguin/open_source_remind.php ++" remind is a sophisticated reminder service ++" you can download remind from: ++" http://www.roaringpenguin.com/penguin/open_source_remind.php + + if version < 600 + syntax clear +@@ -14,24 +15,30 @@ + finish + endif + +-" shut case off ++" shut case off. + syn case ignore + + syn keyword remindCommands REM OMIT SET FSET UNSET +-syn keyword remindExpiry UNTIL SCANFROM SCAN WARN SCHED ++syn keyword remindExpiry UNTIL FROM SCANFROM SCAN WARN SCHED + syn keyword remindTag PRIORITY TAG + syn keyword remindTimed AT DURATION + syn keyword remindMove ONCE SKIP BEFORE AFTER +-syn keyword remindSpecial INCLUDE INC BANNER PUSH-OMIT-CONTEXT PUSH CLEAR-OMIT-CONTEXT CLEAR POP-OMIT-CONTEXT POP ++syn keyword remindSpecial INCLUDE INC BANNER PUSH-OMIT-CONTEXT PUSH CLEAR-OMIT-CONTEXT CLEAR POP-OMIT-CONTEXT POP COLOR + syn keyword remindRun MSG MSF RUN CAL SATISFY SPECIAL PS PSFILE SHADE MOON + syn keyword remindConditional IF ELSE ENDIF IFTRIG ++syn keyword remindDebug DEBUG DUMPVARS DUMP ERRMSG FLUSH PRESERVE + syn match remindComment "#.*$" + syn region remindString start=+'+ end=+'+ skip=+\\\\\|\\'+ oneline + syn region remindString start=+"+ end=+"+ skip=+\\\\\|\\"+ oneline +-syn keyword remindDebug DEBUG DUMPVARS DUMP ERRMSG FLUSH PRESERVE + syn match remindVar "\$[_a-zA-Z][_a-zA-Z0-9]*" + syn match remindSubst "%[^ ]" + syn match remindAdvanceNumber "\(\*\|+\|-\|++\|--\)[0-9]\+" ++" XXX: use different separators for dates and times? ++syn match remindDateSeparators "[/:@\.-]" contained ++syn match remindTimes "[0-9]\{1,2}[:\.][0-9]\{1,2}" contains=remindDateSeparators ++" XXX: why not match only valid dates? Ok, checking for 'Feb the 30' would ++" be impossible, but at least check for valid months and times. ++syn match remindDates "'[0-9]\{4}[/-][0-9]\{1,2}[/-][0-9]\{1,2}\(@[0-9]\{1,2}[:\.][0-9]\{1,2}\)\?'" contains=remindDateSeparators + " This will match trailing whitespaces that seem to break rem2ps. + " Courtesy of Michael Dunn. + syn match remindWarning display excludenl "\S\s\+$"ms=s+1 +@@ -54,11 +61,14 @@ + HiLink remindRun Function + HiLink remindConditional Conditional + HiLink remindComment Comment ++ HiLink remindTimes String + HiLink remindString String + HiLink remindDebug Debug + HiLink remindVar Identifier + HiLink remindSubst Constant + HiLink remindAdvanceNumber Number ++ HiLink remindDateSeparators Comment ++ HiLink remindDates String + HiLink remindWarning Error + + delcommand HiLink +diff -u -r --new-file runtime/syntax.orig/rhelp.vim runtime/syntax/rhelp.vim +--- runtime/syntax.orig/rhelp.vim 2008-04-10 14:24:17.000000000 -0500 ++++ runtime/syntax/rhelp.vim 2009-05-14 13:53:07.000000000 -0500 +@@ -1,13 +1,14 @@ + " Vim syntax file + " Language: R Help File + " Maintainer: Johannes Ranke <jranke@uni-bremen.de> +-" Last Change: 2008 Apr 10 +-" Version: 0.7.1 +-" SVN: $Id: rhelp.vim 81 2008-04-10 08:30:11Z ranke $ ++" Last Change: 2009 Mai 12 ++" Version: 0.7.2 ++" SVN: $Id: rhelp.vim 86 2009-05-12 19:23:47Z ranke $ + " Remarks: - Now includes R syntax highlighting in the appropriate + " sections if an r.vim file is in the same directory or in the + " default debian location. + " - There is no Latex markup in equations ++" - Thanks to Will Gray for finding and fixing a bug + + " Version Clears: {{{1 + " For version 5.x: Clear all syntax items +@@ -57,7 +58,7 @@ + + " Links {{{1 + syn region rhelpLink matchgroup=rhelpSection start="\\link{" end="}" contained keepend +-syn region rhelpLink matchgroup=rhelpSection start="\\link\[.*\]{" end="}" contained keepend ++syn region rhelpLink matchgroup=rhelpSection start="\\link\[.\{-}\]{" end="}" contained keepend + syn region rhelpLink matchgroup=rhelpSection start="\\linkS4class{" end="}" contained keepend + + " Type Styles {{{1 +diff -u -r --new-file runtime/syntax.orig/rnoweb.vim runtime/syntax/rnoweb.vim +--- runtime/syntax.orig/rnoweb.vim 2007-05-05 12:55:31.000000000 -0500 ++++ runtime/syntax/rnoweb.vim 2009-05-05 14:48:52.000000000 -0500 +@@ -1,9 +1,9 @@ + " Vim syntax file + " Language: R noweb Files + " Maintainer: Johannes Ranke <jranke@uni-bremen.de> +-" Last Change: 2007 Mär 30 +-" Version: 0.8 +-" SVN: $Id: rnoweb.vim,v 1.3 2007/05/05 17:55:31 vimboss Exp $ ++" Last Change: 2009 May 05 ++" Version: 0.9 ++" SVN: $Id: rnoweb.vim 84 2009-05-03 19:52:47Z ranke $ + " Remarks: - This file is inspired by the proposal of + " Fernando Henrique Ferraz Pereira da Rosa <feferraz@ime.usp.br> + " http://www.ime.usp.br/~feferraz/en/sweavevim.html +@@ -25,6 +25,7 @@ + unlet b:current_syntax + + syn cluster texMatchGroup add=@rnoweb ++syn cluster texMathMatchGroup add=rnowebSexpr + syn cluster texEnvGroup add=@rnoweb + syn cluster texFoldGroup add=@rnoweb + syn cluster texDocGroup add=@rnoweb +diff -u -r --new-file runtime/syntax.orig/rst.vim runtime/syntax/rst.vim +--- runtime/syntax.orig/rst.vim 2006-07-03 18:49:39.000000000 -0500 ++++ runtime/syntax/rst.vim 2010-02-11 06:41:37.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: reStructuredText documentation format + " Maintainer: Nikolai Weibull <now@bitwi.se> +-" Latest Revision: 2006-07-04 ++" Latest Revision: 2010-01-23 + + if exists("b:current_syntax") + finish +@@ -12,12 +12,9 @@ + + syn case ignore + +-" FIXME: The problem with these two is that Vim doesn’t seem to like +-" matching across line boundaries. +-" +-" syn match rstSections /^.*\n[=`:.'"~^_*+#-]\+$/ ++syn match rstSections "^\%(\([=`:.'"~^_*+#-]\)\1\+\n\)\=.\+\n\([=`:.'"~^_*+#-]\)\2\+$" + +-" syn match rstTransition /^\s*[=`:.'"~^_*+#-]\{4,}\s*$/ ++syn match rstTransition /^[=`:.'"~^_*+#-]\{4,}\s*$/ + + syn cluster rstCruft contains=rstEmphasis,rstStrongEmphasis, + \ rstInterpretedText,rstInlineLiteral,rstSubstitutionReference, +@@ -140,12 +137,12 @@ + + " TODO: Use better syncing. I don’t know the specifics of syncing well enough, + " though. +-syn sync minlines=50 ++syn sync minlines=50 linebreaks=1 + + hi def link rstTodo Todo + hi def link rstComment Comment +-"hi def link rstSections Type +-"hi def link rstTransition Type ++hi def link rstSections Type ++hi def link rstTransition Type + hi def link rstLiteralBlock String + hi def link rstQuotedLiteralBlock String + hi def link rstDoctestBlock PreProc +diff -u -r --new-file runtime/syntax.orig/samba.vim runtime/syntax/samba.vim +--- runtime/syntax.orig/samba.vim 2004-09-21 04:51:35.000000000 -0500 ++++ runtime/syntax/samba.vim 2009-09-18 05:27:18.000000000 -0500 +@@ -2,8 +2,10 @@ + " Language: samba configuration files (smb.conf) + " Maintainer: Rafael Garcia-Suarez <rgarciasuarez@free.fr> + " URL: http://rgarciasuarez.free.fr/vim/syntax/samba.vim +-" Last change: 2004 September 21 +- ++" Last change: 2009 Aug 06 ++" ++" New maintainer wanted! ++" + " Don't forget to run your config file through testparm(1)! + + " For version 5.x: Clear all syntax items +@@ -51,7 +53,7 @@ + syn keyword sambaKeyword contained netbios nis notify nt null offset ok ole + syn keyword sambaKeyword contained only open oplock oplocks options order os + syn keyword sambaKeyword contained output packet page panic passwd password +-syn keyword sambaKeyword contained passwords path permissions pipe port ++syn keyword sambaKeyword contained passwords path permissions pipe port ports + syn keyword sambaKeyword contained postexec postscript prediction preexec + syn keyword sambaKeyword contained prefered preferred preload preserve print + syn keyword sambaKeyword contained printable printcap printer printers +diff -u -r --new-file runtime/syntax.orig/scheme.vim runtime/syntax/scheme.vim +--- runtime/syntax.orig/scheme.vim 2007-06-16 15:09:14.000000000 -0500 ++++ runtime/syntax/scheme.vim 2009-11-28 06:33:43.000000000 -0600 +@@ -1,6 +1,6 @@ + " Vim syntax file +-" Language: Scheme (R5RS) +-" Last Change: 2007 Jun 16 ++" Language: Scheme (R5RS + some R6RS extras) ++" Last Change: 2009 Nov 27 + " Maintainer: Sergey Khorev <sergey.khorev@gmail.com> + " Original author: Dirk van Deun <dirk@igwe.vub.ac.be> + +@@ -26,8 +26,8 @@ + + " Fascist highlighting: everything that doesn't fit the rules is an error... + +-syn match schemeError oneline ![^ \t()\[\]";]*! +-syn match schemeError oneline ")" ++syn match schemeError ![^ \t()\[\]";]*! ++syn match schemeError ")" + + " Quoted and backquoted stuff + +@@ -71,6 +71,8 @@ + syn keyword schemeSyntax begin do delay set! else => + syn keyword schemeSyntax quote quasiquote unquote unquote-splicing + syn keyword schemeSyntax define-syntax let-syntax letrec-syntax syntax-rules ++" R6RS ++syn keyword schemeSyntax define-record-type fields protocol + + syn keyword schemeFunc not boolean? eq? eqv? equal? pair? cons car cdr set-car! + syn keyword schemeFunc set-cdr! caar cadr cdar cddr caaar caadr cadar caddr +@@ -109,30 +111,39 @@ + syn keyword schemeFunc dynamic-wind port? values call-with-values + syn keyword schemeFunc scheme-report-environment null-environment + syn keyword schemeFunc interaction-environment ++" R6RS ++syn keyword schemeFunc make-eq-hashtable make-eqv-hashtable make-hashtable ++syn keyword schemeFunc hashtable? hashtable-size hashtable-ref hashtable-set! ++syn keyword schemeFunc hashtable-delete! hashtable-contains? hashtable-update! ++syn keyword schemeFunc hashtable-copy hashtable-clear! hashtable-keys ++syn keyword schemeFunc hashtable-entries hashtable-equivalence-function hashtable-hash-function ++syn keyword schemeFunc hashtable-mutable? equal-hash string-hash string-ci-hash symbol-hash ++syn keyword schemeFunc find for-all exists filter partition fold-left fold-right ++syn keyword schemeFunc remp remove remv remq memp assp cons* + + " ... so that a single + or -, inside a quoted context, would not be + " interpreted as a number (outside such contexts, it's a schemeFunc) + +-syn match schemeDelimiter oneline !\.[ \t\[\]()";]!me=e-1 +-syn match schemeDelimiter oneline !\.$! ++syn match schemeDelimiter !\.[ \t\[\]()";]!me=e-1 ++syn match schemeDelimiter !\.$! + " ... and a single dot is not a number but a delimiter + + " This keeps all other stuff unhighlighted, except *stuff* and <stuff>: + +-syn match schemeOther oneline ,[a-z!$%&*/:<=>?^_~+@#%-][-a-z!$%&*/:<=>?^_~0-9+.@#%]*, +-syn match schemeError oneline ,[a-z!$%&*/:<=>?^_~+@#%-][-a-z!$%&*/:<=>?^_~0-9+.@#%]*[^-a-z!$%&*/:<=>?^_~0-9+.@ \t\[\]()";]\+[^ \t\[\]()";]*, ++syn match schemeOther ,[a-z!$%&*/:<=>?^_~+@#%-][-a-z!$%&*/:<=>?^_~0-9+.@#%]*, ++syn match schemeError ,[a-z!$%&*/:<=>?^_~+@#%-][-a-z!$%&*/:<=>?^_~0-9+.@#%]*[^-a-z!$%&*/:<=>?^_~0-9+.@ \t\[\]()";]\+[^ \t\[\]()";]*, + +-syn match schemeOther oneline "\.\.\." +-syn match schemeError oneline !\.\.\.[^ \t\[\]()";]\+! ++syn match schemeOther "\.\.\." ++syn match schemeError !\.\.\.[^ \t\[\]()";]\+! + " ... a special identifier + +-syn match schemeConstant oneline ,\*[-a-z!$%&*/:<=>?^_~0-9+.@]*\*[ \t\[\]()";],me=e-1 +-syn match schemeConstant oneline ,\*[-a-z!$%&*/:<=>?^_~0-9+.@]*\*$, +-syn match schemeError oneline ,\*[-a-z!$%&*/:<=>?^_~0-9+.@]*\*[^-a-z!$%&*/:<=>?^_~0-9+.@ \t\[\]()";]\+[^ \t\[\]()";]*, +- +-syn match schemeConstant oneline ,<[-a-z!$%&*/:<=>?^_~0-9+.@]*>[ \t\[\]()";],me=e-1 +-syn match schemeConstant oneline ,<[-a-z!$%&*/:<=>?^_~0-9+.@]*>$, +-syn match schemeError oneline ,<[-a-z!$%&*/:<=>?^_~0-9+.@]*>[^-a-z!$%&*/:<=>?^_~0-9+.@ \t\[\]()";]\+[^ \t\[\]()";]*, ++syn match schemeConstant ,\*[-a-z!$%&*/:<=>?^_~0-9+.@]\+\*[ \t\[\]()";],me=e-1 ++syn match schemeConstant ,\*[-a-z!$%&*/:<=>?^_~0-9+.@]\+\*$, ++syn match schemeError ,\*[-a-z!$%&*/:<=>?^_~0-9+.@]*\*[^-a-z!$%&*/:<=>?^_~0-9+.@ \t\[\]()";]\+[^ \t\[\]()";]*, ++ ++syn match schemeConstant ,<[-a-z!$%&*/:<=>?^_~0-9+.@]*>[ \t\[\]()";],me=e-1 ++syn match schemeConstant ,<[-a-z!$%&*/:<=>?^_~0-9+.@]*>$, ++syn match schemeError ,<[-a-z!$%&*/:<=>?^_~0-9+.@]*>[^-a-z!$%&*/:<=>?^_~0-9+.@ \t\[\]()";]\+[^ \t\[\]()";]*, + + " Non-quoted lists, and strings: + +@@ -153,23 +164,27 @@ + " Writing out the complete description of Scheme numerals without + " using variables is a day's work for a trained secretary... + +-syn match schemeOther oneline ![+-][ \t\[\]()";]!me=e-1 +-syn match schemeOther oneline ![+-]$! ++syn match schemeOther ![+-][ \t\[\]()";]!me=e-1 ++syn match schemeOther ![+-]$! + " + " This is a useful lax approximation: +-syn match schemeNumber oneline "[-#+0-9.][-#+/0-9a-f@i.boxesfdl]*" +-syn match schemeError oneline ![-#+0-9.][-#+/0-9a-f@i.boxesfdl]*[^-#+/0-9a-f@i.boxesfdl \t\[\]()";][^ \t\[\]()";]*! ++syn match schemeNumber "[-#+.]\=[0-9][-#+/0-9a-f@i.boxesfdl]*" ++syn match schemeError ![-#+0-9.][-#+/0-9a-f@i.boxesfdl]*[^-#+/0-9a-f@i.boxesfdl \t\[\]()";][^ \t\[\]()";]*! + +-syn match schemeBoolean oneline "#[tf]" +-syn match schemeError oneline !#[tf][^ \t\[\]()";]\+! ++syn match schemeBoolean "#[tf]" ++syn match schemeError !#[tf][^ \t\[\]()";]\+! ++ ++syn match schemeCharacter "#\\" ++syn match schemeCharacter "#\\." ++syn match schemeError !#\\.[^ \t\[\]()";]\+! ++syn match schemeCharacter "#\\space" ++syn match schemeError !#\\space[^ \t\[\]()";]\+! ++syn match schemeCharacter "#\\newline" ++syn match schemeError !#\\newline[^ \t\[\]()";]\+! ++ ++" R6RS ++syn match schemeCharacter "#\\x[0-9a-fA-F]\+" + +-syn match schemeChar oneline "#\\" +-syn match schemeChar oneline "#\\." +-syn match schemeError oneline !#\\.[^ \t\[\]()";]\+! +-syn match schemeChar oneline "#\\space" +-syn match schemeError oneline !#\\space[^ \t\[\]()";]\+! +-syn match schemeChar oneline "#\\newline" +-syn match schemeError oneline !#\\newline[^ \t\[\]()";]\+! + + if exists("b:is_mzscheme") || exists("is_mzscheme") + " MzScheme extensions +@@ -177,11 +192,11 @@ + syn region schemeComment start="#|" end="|#" + + " #%xxx are the special MzScheme identifiers +- syn match schemeOther oneline "#%[-a-z!$%&*/:<=>?^_~0-9+.@#%]\+" ++ syn match schemeOther "#%[-a-z!$%&*/:<=>?^_~0-9+.@#%]\+" + " anything limited by |'s is identifier +- syn match schemeOther oneline "|[^|]\+|" ++ syn match schemeOther "|[^|]\+|" + +- syn match schemeChar oneline "#\\\%(return\|tab\)" ++ syn match schemeCharacter "#\\\%(return\|tab\)" + + " Modules require stmt + syn keyword schemeExtSyntax module require dynamic-require lib prefix all-except prefix-all-except rename +@@ -234,8 +249,8 @@ + " multiline comment + syntax region schemeMultilineComment start=/#|/ end=/|#/ contains=schemeMultilineComment + +- syn match schemeOther oneline "##[-a-z!$%&*/:<=>?^_~0-9+.@#%]\+" +- syn match schemeExtSyntax oneline "#:[-a-z!$%&*/:<=>?^_~0-9+.@#%]\+" ++ syn match schemeOther "##[-a-z!$%&*/:<=>?^_~0-9+.@#%]\+" ++ syn match schemeExtSyntax "#:[-a-z!$%&*/:<=>?^_~0-9+.@#%]\+" + + syn keyword schemeExtSyntax unit uses declare hide foreign-declare foreign-parse foreign-parse/spec + syn keyword schemeExtSyntax foreign-lambda foreign-lambda* define-external define-macro load-library +@@ -266,7 +281,7 @@ + endif + + " suggested by Alex Queiroz +- syn match schemeExtSyntax oneline "#![-a-z!$%&*/:<=>?^_~0-9+.@#%]\+" ++ syn match schemeExtSyntax "#![-a-z!$%&*/:<=>?^_~0-9+.@#%]\+" + syn region schemeString start=+#<#\s*\z(.*\)+ end=+^\z1$+ + endif + +@@ -290,7 +305,7 @@ + HiLink schemeFunc Function + + HiLink schemeString String +- HiLink schemeChar Character ++ HiLink schemeCharacter Character + HiLink schemeNumber Number + HiLink schemeBoolean Boolean + +diff -u -r --new-file runtime/syntax.orig/screen.vim runtime/syntax/screen.vim +--- runtime/syntax.orig/screen.vim 2006-04-21 07:41:02.000000000 -0500 ++++ runtime/syntax/screen.vim 2010-01-12 14:33:53.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: screen(1) configuration file + " Maintainer: Nikolai Weibull <now@bitwi.se> +-" Latest Revision: 2006-04-19 ++" Latest Revision: 2010-01-03 + + if exists("b:current_syntax") + finish +@@ -15,54 +15,219 @@ + syn keyword screenTodo contained TODO FIXME XXX NOTE + + syn region screenComment display oneline start='#' end='$' +- \ contains=screenTodo,@Spell ++ \ contains=screenTodo,@Spell + + syn region screenString display oneline start=+"+ skip=+\\"+ end=+"+ +- \ contains=screenVariable,screenSpecial ++ \ contains=screenVariable,screenSpecial + + syn region screenLiteral display oneline start=+'+ skip=+\\'+ end=+'+ + +-syn match screenVariable contained display '$\(\h\w*\|{\h\w*}\)' ++syn match screenVariable contained display '$\%(\h\w*\|{\h\w*}\)' + + syn keyword screenBoolean on off + + syn match screenNumbers display '\<\d\+\>' + + syn match screenSpecials contained +- \ '%\([%aAdDhlmMstuwWyY?:{]\|[0-9]*n\|0?cC\)' ++ \ '%\%([%aAdDhlmMstuwWyY?:{]\|[0-9]*n\|0?cC\)' + +-syn keyword screenCommands acladd aclchg acldel aclgrp aclumask activity +- \ addacl allpartial at attrcolor autodetach +- \ bell_msg bind bindkey bufferfile caption chacl +- \ chdir clear colon command compacthist console +- \ copy copy_regcrlf debug detach digraph dinfo +- \ crlf displays dumptermcap echo exec fit focus +- \ height help history info kill lastmsg license +- \ lockscreen markkeys meta msgminwait msgwait +- \ multiuser nethack next nonblock number only +- \ other partial_state password paste pastefont +- \ pow_break pow_detach_msg prev printcmd process +- \ quit readbuf readreg redisplay register +- \ remove removebuf reset resize screen select +- \ sessionname setenv shelltitle silencewait +- \ verbose sleep sorendition split startup_message +- \ stuff su suspend time title umask version wall +- \ width writebuf xoff xon defmode hardstatus +- \ altscreen break breaktype copy_reg defbreaktype +- \ defencoding deflog encoding eval ignorecase +- \ ins_reg maxwin partial pow_detach setsid source +- \ unsetenv windowlist windows defautonuke autonuke +- \ defbce bce defc1 c1 defcharset charset defescape +- \ escape defflow flow defkanji kanji deflogin +- \ login defmonitor monitor defhstatus hstatus +- \ defobuflimit obuflimit defscrollback scrollback +- \ defshell shell defsilence silence defslowpaste +- \ slowpaste defutf8 utf8 defwrap wrap defwritelock +- \ writelock defzombie zombie defgr gr hardcopy +- \ hardcopy_append hardcopydir hardstatus log +- \ logfile login logtstamp mapdefault mapnotnext +- \ maptimeout term termcap terminfo termcapinfo +- \ vbell vbell_msg vbellwait ++syn keyword screenCommands ++ \ acladd ++ \ aclchg ++ \ acldel ++ \ aclgrp ++ \ aclumask ++ \ activity ++ \ addacl ++ \ allpartial ++ \ altscreen ++ \ at ++ \ attrcolor ++ \ autodetach ++ \ autonuke ++ \ backtick ++ \ bce ++ \ bd_bc_down ++ \ bd_bc_left ++ \ bd_bc_right ++ \ bd_bc_up ++ \ bd_bell ++ \ bd_braille_table ++ \ bd_eightdot ++ \ bd_info ++ \ bd_link ++ \ bd_lower_left ++ \ bd_lower_right ++ \ bd_ncrc ++ \ bd_port ++ \ bd_scroll ++ \ bd_skip ++ \ bd_start_braille ++ \ bd_type ++ \ bd_upper_left ++ \ bd_upper_right ++ \ bd_width ++ \ bell ++ \ bell_msg ++ \ bind ++ \ bindkey ++ \ blanker ++ \ blankerprg ++ \ break ++ \ breaktype ++ \ bufferfile ++ \ c1 ++ \ caption ++ \ chacl ++ \ charset ++ \ chdir ++ \ clear ++ \ colon ++ \ command ++ \ compacthist ++ \ console ++ \ copy ++ \ crlf ++ \ debug ++ \ defautonuke ++ \ defbce ++ \ defbreaktype ++ \ defc1 ++ \ defcharset ++ \ defencoding ++ \ defescape ++ \ defflow ++ \ defgr ++ \ defhstatus ++ \ defkanji ++ \ deflog ++ \ deflogin ++ \ defmode ++ \ defmonitor ++ \ defnonblock ++ \ defobuflimit ++ \ defscrollback ++ \ defshell ++ \ defsilence ++ \ defslowpaste ++ \ defutf8 ++ \ defwrap ++ \ defwritelock ++ \ detach ++ \ digraph ++ \ dinfo ++ \ displays ++ \ dumptermcap ++ \ echo ++ \ encoding ++ \ escape ++ \ eval ++ \ exec ++ \ fit ++ \ flow ++ \ focus ++ \ gr ++ \ hardcopy ++ \ hardcopy_append ++ \ hardcopydir ++ \ hardstatus ++ \ height ++ \ help ++ \ history ++ \ hstatus ++ \ idle ++ \ ignorecase ++ \ info ++ \ kanji ++ \ kill ++ \ lastmsg ++ \ layout ++ \ license ++ \ lockscreen ++ \ log ++ \ logfile ++ \ login ++ \ logtstamp ++ \ mapdefault ++ \ mapnotnext ++ \ maptimeout ++ \ markkeys ++ \ maxwin ++ \ meta ++ \ monitor ++ \ msgminwait ++ \ msgwait ++ \ multiuser ++ \ nethack ++ \ next ++ \ nonblock ++ \ number ++ \ obuflimit ++ \ only ++ \ other ++ \ partial ++ \ password ++ \ paste ++ \ pastefont ++ \ pow_break ++ \ pow_detach ++ \ pow_detach_msg ++ \ prev ++ \ printcmd ++ \ process ++ \ quit ++ \ readbuf ++ \ readreg ++ \ redisplay ++ \ register ++ \ remove ++ \ removebuf ++ \ reset ++ \ resize ++ \ screen ++ \ scrollback ++ \ select ++ \ sessionname ++ \ setenv ++ \ setsid ++ \ shell ++ \ shelltitle ++ \ silence ++ \ silencewait ++ \ sleep ++ \ slowpaste ++ \ sorendition ++ \ source ++ \ split ++ \ startup_message ++ \ stuff ++ \ su ++ \ suspend ++ \ term ++ \ termcap ++ \ termcapinfo ++ \ terminfo ++ \ time ++ \ title ++ \ umask ++ \ unsetenv ++ \ utf8 ++ \ vbell ++ \ vbell_msg ++ \ vbellwait ++ \ verbose ++ \ version ++ \ wall ++ \ width ++ \ windowlist ++ \ windows ++ \ wrap ++ \ writebuf ++ \ writelock ++ \ xoff ++ \ xon ++ \ zmodem ++ \ zombie + + hi def link screenEscape Special + hi def link screenComment Comment +diff -u -r --new-file runtime/syntax.orig/sdc.vim runtime/syntax/sdc.vim +--- runtime/syntax.orig/sdc.vim 1969-12-31 18:00:00.000000000 -0600 ++++ runtime/syntax/sdc.vim 2009-05-05 13:28:48.000000000 -0500 +@@ -0,0 +1,41 @@ ++" Vim syntax file ++" Language: SDC - Synopsys Design Constraints ++" Maintainer: Maurizio Tranchero - maurizio.tranchero@gmail.com ++" Last Change: Thu Mar 25 17:35:16 CET 2009 ++" Credits: based on TCL Vim syntax file ++" Version: 0.3 ++ ++" Quit when a syntax file was already loaded ++if exists("b:current_syntax") ++ finish ++endif ++ ++" Read the TCL syntax to start with ++runtime! syntax/tcl.vim ++ ++" SDC-specific keywords ++syn keyword sdcCollections foreach_in_collection ++syn keyword sdcObjectsQuery get_clocks get_ports ++syn keyword sdcObjectsInfo get_point_info get_node_info get_path_info ++syn keyword sdcObjectsInfo get_timing_paths set_attribute ++syn keyword sdcConstraints set_false_path ++syn keyword sdcNonIdealities set_min_delay set_max_delay ++syn keyword sdcNonIdealities set_input_delay set_output_delay ++syn keyword sdcNonIdealities set_load set_min_capacitance set_max_capacitance ++syn keyword sdcCreateOperations create_clock create_timing_netlist update_timing_netlist ++ ++" command flags highlighting ++syn match sdcFlags "[[:space:]]-[[:alpha:]]*\>" ++ ++" Define the default highlighting. ++hi def link sdcCollections Repeat ++hi def link sdcObjectsInfo Operator ++hi def link sdcCreateOperations Operator ++hi def link sdcObjectsQuery Operator ++hi def link sdcConstraints Operator ++hi def link sdcNonIdealities Operator ++hi def link sdcFlags Special ++ ++let b:current_syntax = "sdc" ++ ++" vim: ts=8 +diff -u -r --new-file runtime/syntax.orig/sgmllnx.vim runtime/syntax/sgmllnx.vim +--- runtime/syntax.orig/sgmllnx.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/sgmllnx.vim 2008-09-18 13:56:21.000000000 -0500 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: SGML-linuxdoc (supported by old sgmltools-1.x) + " (for more information, visit www.sgmltools.org) +-" Maintainer: Nam SungHyun <namsh@kldp.org> +-" Last Change: 2001 Apr 26 ++" Maintainer: SungHyun Nam <goweol@gmail.com> ++" Last Change: 2008 Sep 17 + + " For version 5.x: Clear all syntax items + " For version 6.x: Quit when a syntax file was already loaded +diff -u -r --new-file runtime/syntax.orig/sh.vim runtime/syntax/sh.vim +--- runtime/syntax.orig/sh.vim 2008-07-14 15:23:42.000000000 -0500 ++++ runtime/syntax/sh.vim 2010-01-12 14:45:24.000000000 -0600 +@@ -2,8 +2,8 @@ + " Language: shell (sh) Korn shell (ksh) bash (sh) + " Maintainer: Dr. Charles E. Campbell, Jr. <NdrOchipS@PcampbellAfamily.Mbiz> + " Previous Maintainer: Lennart Schultz <Lennart.Schultz@ecmwf.int> +-" Last Change: Jul 11, 2008 +-" Version: 102 ++" Last Change: Nov 17, 2009 ++" Version: 110 + " URL: http://mysite.verizon.net/astronaut/vim/index.html#vimlinks_syntax + " For options and settings, please use: :help ft-sh-syntax + " This file includes many ideas from Éric Brunet (eric.brunet@ens.fr) +@@ -67,13 +67,13 @@ + + " Clusters: contains=@... clusters {{{1 + "================================== +-syn cluster shErrorList contains=shDoError,shIfError,shInError,shCaseError,shEsacError,shCurlyError,shParenError,shTestError ++syn cluster shErrorList contains=shDoError,shIfError,shInError,shCaseError,shEsacError,shCurlyError,shParenError,shTestError,shOK + if exists("b:is_kornshell") + syn cluster ErrorList add=shDTestError + endif +-syn cluster shArithParenList contains=shArithmetic,shDeref,shDerefSimple,shEscape,shNumber,shOperator,shPosnParm,shExSingleQuote,shSingleQuote,shDoubleQuote,shStatement,shVariable,shAlias,shTest,shCtrlSeq,shSpecial,shParen ++syn cluster shArithParenList contains=shArithmetic,shCaseEsac,shDeref,shDerefSimple,shEcho,shEscape,shNumber,shOperator,shPosnParm,shExSingleQuote,shRedir,shSingleQuote,shDoubleQuote,shStatement,shVariable,shAlias,shTest,shCtrlSeq,shSpecial,shParen,bashSpecialVariables,bashStatement + syn cluster shArithList contains=@shArithParenList,shParenError +-syn cluster shCaseEsacList contains=shCaseStart,shCase,shCaseBar,shCaseIn,shComment,shDeref,shDerefSimple,shCaseCommandSub,shCaseExSingleQuote,shCaseSingleQuote,shCaseDoubleQuote,shCtrlSeq,@shErrorList,shStringSpecial ++syn cluster shCaseEsacList contains=shCaseStart,shCase,shCaseBar,shCaseIn,shComment,shDeref,shDerefSimple,shCaseCommandSub,shCaseExSingleQuote,shCaseSingleQuote,shCaseDoubleQuote,shCtrlSeq,@shErrorList,shStringSpecial,shCaseRange + syn cluster shCaseList contains=@shCommandSubList,shCaseEsac,shColon,shCommandSub,shCommandSub,shComment,shDo,shEcho,shExpr,shFor,shHereDoc,shIf,shRedir,shSetList,shSource,shStatement,shVariable,shCtrlSeq + syn cluster shColonList contains=@shCaseList + syn cluster shCommandSubList contains=shArithmetic,shDeref,shDerefSimple,shEscape,shNumber,shOperator,shPosnParm,shExSingleQuote,shSingleQuote,shDoubleQuote,shStatement,shVariable,shSubSh,shAlias,shTest,shCtrlSeq,shSpecial +@@ -84,7 +84,7 @@ + syn cluster shEchoList contains=shArithmetic,shCommandSub,shDeref,shDerefSimple,shExpr,shExSingleQuote,shSingleQuote,shDoubleQuote,shCtrlSeq,shEchoQuote + syn cluster shExprList1 contains=shCharClass,shNumber,shOperator,shExSingleQuote,shSingleQuote,shDoubleQuote,shExpr,shDblBrace,shDeref,shDerefSimple,shCtrlSeq + syn cluster shExprList2 contains=@shExprList1,@shCaseList,shTest +-syn cluster shFunctionList contains=@shCommandSubList,shCaseEsac,shColon,shCommandSub,shCommandSub,shComment,shDo,shEcho,shExpr,shFor,shHereDoc,shIf,shRedir,shSetList,shSource,shStatement,shVariable,shOperator,shCtrlSeq ++syn cluster shFunctionList contains=@shCommandSubList,shCaseEsac,shColon,shCommandSub,shCommandSub,shComment,shDo,shEcho,shExpr,shFor,shHereDoc,shIf,shOption,shRedir,shSetList,shSource,shStatement,shVariable,shOperator,shCtrlSeq + if exists("b:is_kornshell") || exists("b:is_bash") + syn cluster shFunctionList add=shRepeat + syn cluster shFunctionList add=shDblBrace,shDblParen +@@ -94,19 +94,18 @@ + syn cluster shHereListDQ contains=shBeginHere,@shDblQuoteList,shHerePayload + syn cluster shIdList contains=shCommandSub,shWrapLineOperator,shSetOption,shDeref,shDerefSimple,shRedir,shExSingleQuote,shSingleQuote,shDoubleQuote,shExpr,shCtrlSeq,shStringSpecial + syn cluster shLoopList contains=@shCaseList,shTestOpr,shExpr,shDblBrace,shConditional,shCaseEsac,shTest,@shErrorList,shSet +-syn cluster shSubShList contains=@shCaseList,shOperator ++syn cluster shSubShList contains=@shCommandSubList,shCaseEsac,shColon,shCommandSub,shCommandSub,shComment,shDo,shEcho,shExpr,shFor,shIf,shRedir,shSetList,shSource,shStatement,shVariable,shCtrlSeq,shOperator + syn cluster shTestList contains=shCharClass,shComment,shCommandSub,shDeref,shDerefSimple,shDoubleQuote,shExpr,shExpr,shNumber,shOperator,shExSingleQuote,shSingleQuote,shTestOpr,shTest,shCtrlSeq + +- + " Echo: {{{1 + " ==== + " This one is needed INSIDE a CommandSub, so that `echo bla` be correct +-syn region shEcho matchgroup=shStatement start="\<echo\>" skip="\\$" matchgroup=shOperator end="$" matchgroup=NONE end="[<>;&|()]"me=e-1 end="\d[<>]"me=e-2 end="#"me=e-1 contains=@shEchoList skipwhite nextgroup=shQuickComment +-syn region shEcho matchgroup=shStatement start="\<print\>" skip="\\$" matchgroup=shOperator end="$" matchgroup=NONE end="[<>;&|()]"me=e-1 end="\d[<>]"me=e-2 end="#"me=e-1 contains=@shEchoList skipwhite nextgroup=shQuickComment +-syn match shEchoQuote contained '\%(\\\\\)*\\["`']' ++syn region shEcho matchgroup=shStatement start="\<echo\>" skip="\\$" matchgroup=shOperator end="$" matchgroup=NONE end="[<>;&|()]"me=e-1 end="\d[<>]"me=e-2 end="\s#"me=e-2 contains=@shEchoList skipwhite nextgroup=shQuickComment ++syn region shEcho matchgroup=shStatement start="\<print\>" skip="\\$" matchgroup=shOperator end="$" matchgroup=NONE end="[<>;&|()]"me=e-1 end="\d[<>]"me=e-2 end="\s#"me=e-2 contains=@shEchoList skipwhite nextgroup=shQuickComment ++syn match shEchoQuote contained '\%(\\\\\)*\\["`'()]' + + " This must be after the strings, so that ... \" will be correct +-syn region shEmbeddedEcho contained matchgroup=shStatement start="\<print\>" skip="\\$" matchgroup=shOperator end="$" matchgroup=NONE end="[<>;&|`)]"me=e-1 end="\d[<>]"me=e-2 end="#"me=e-1 contains=shNumber,shExSingleQuote,shSingleQuote,shDeref,shDerefSimple,shSpecialVar,shOperator,shDoubleQuote,shCharClass,shCtrlSeq ++syn region shEmbeddedEcho contained matchgroup=shStatement start="\<print\>" skip="\\$" matchgroup=shOperator end="$" matchgroup=NONE end="[<>;&|`)]"me=e-1 end="\d[<>]"me=e-2 end="\s#"me=e-2 contains=shNumber,shExSingleQuote,shSingleQuote,shDeref,shDerefSimple,shSpecialVar,shOperator,shDoubleQuote,shCharClass,shCtrlSeq + + " Alias: {{{1 + " ===== +@@ -125,6 +124,7 @@ + syn match shEsacError "\<esac\>" + syn match shCurlyError "}" + syn match shParenError ")" ++syn match shOK '\.\(done\|fi\|in\|esac\)' + if exists("b:is_kornshell") + syn match shDTestError "]]" + endif +@@ -152,14 +152,13 @@ + + " Subshells: {{{1 + " ========== +-syn region shExpr transparent matchgroup=shExprRegion start="{" end="}" contains=@shExprList2 +-syn region shSubSh transparent matchgroup=shSubShRegion start="(" end=")" contains=@shSubShList ++syn region shExpr transparent matchgroup=shExprRegion start="{" end="}" contains=@shExprList2 nextgroup=shMoreSpecial ++syn region shSubSh transparent matchgroup=shSubShRegion start="(" end=")" contains=@shSubShList nextgroup=shMoreSpecial + + " Tests: {{{1 + "======= +-"syn region shExpr transparent matchgroup=shRange start="\[" skip=+\\\\\|\\$+ end="\]" contains=@shTestList +-syn region shExpr matchgroup=shRange start="\[" skip=+\\\\\|\\$+ end="\]" contains=@shTestList +-syn region shTest transparent matchgroup=shStatement start="\<test\>" skip=+\\\\\|\\$+ matchgroup=NONE end="[;&|]"me=e-1 end="$" contains=@shExprList1 ++syn region shExpr matchgroup=shRange start="\[" skip=+\\\\\|\\$+ end="\]" contains=@shTestList,shSpecial ++syn region shTest transparent matchgroup=shStatement start="\<test\s" skip=+\\\\\|\\$+ matchgroup=NONE end="[;&|]"me=e-1 end="$" contains=@shExprList1 + syn match shTestOpr contained "<=\|>=\|!=\|==\|-.\>\|-\(nt\|ot\|ef\|eq\|ne\|lt\|le\|gt\|ge\)\>\|[!<>]" + syn match shTestOpr contained '=' skipwhite nextgroup=shTestDoubleQuote,shTestSingleQuote,shTestPattern + syn match shTestPattern contained '\w\+' +@@ -203,10 +202,11 @@ + " ==== + syn match shCaseBar contained skipwhite "\(^\|[^\\]\)\(\\\\\)*\zs|" nextgroup=shCase,shCaseStart,shCaseBar,shComment,shCaseExSingleQuote,shCaseSingleQuote,shCaseDoubleQuote + syn match shCaseStart contained skipwhite skipnl "(" nextgroup=shCase,shCaseBar +-syn region shCase contained skipwhite skipnl matchgroup=shSnglCase start="\%(\\.\|[^#$()'" \t]\)\{-}\zs)" end=";;" end="esac"me=s-1 contains=@shCaseList nextgroup=shCaseStart,shCase,shComment + if (g:sh_fold_enabled % (s:sh_fold_ifdofor * 2))/s:sh_fold_ifdofor ++ syn region shCase fold contained skipwhite skipnl matchgroup=shSnglCase start="\%(\\.\|[^#$()'" \t]\)\{-}\zs)" end=";;" end="esac"me=s-1 contains=@shCaseList nextgroup=shCaseStart,shCase,shComment + syn region shCaseEsac fold matchgroup=shConditional start="\<case\>" end="\<esac\>" contains=@shCaseEsacList + else ++ syn region shCase contained skipwhite skipnl matchgroup=shSnglCase start="\%(\\.\|[^#$()'" \t]\)\{-}\zs)" end=";;" end="esac"me=s-1 contains=@shCaseList nextgroup=shCaseStart,shCase,shComment + syn region shCaseEsac matchgroup=shConditional start="\<case\>" end="\<esac\>" contains=@shCaseEsacList + endif + syn keyword shCaseIn contained skipwhite skipnl in nextgroup=shCase,shCaseStart,shCaseBar,shComment,shCaseExSingleQuote,shCaseSingleQuote,shCaseDoubleQuote +@@ -218,6 +218,7 @@ + syn region shCaseSingleQuote matchgroup=shOperator start=+'+ end=+'+ contains=shStringSpecial skipwhite skipnl nextgroup=shCaseBar contained + syn region shCaseDoubleQuote matchgroup=shOperator start=+"+ skip=+\\\\\|\\.+ end=+"+ contains=@shDblQuoteList,shStringSpecial skipwhite skipnl nextgroup=shCaseBar contained + syn region shCaseCommandSub start=+`+ skip=+\\\\\|\\.+ end=+`+ contains=@shCommandSubList skipwhite skipnl nextgroup=shCaseBar contained ++syn region shCaseRange matchgroup=Delimiter start=+\[+ skip=+\\\\+ end=+]+ contained + + " Misc: {{{1 + "====== +@@ -256,34 +257,36 @@ + + syn match shSource "^\.\s" + syn match shSource "\s\.\s" +-syn region shColon start="^\s*:" end="$\|" end="#"me=e-1 contains=@shColonList ++"syn region shColon start="^\s*:" end="$" end="\s#"me=e-2 contains=@shColonList ++syn region shColon start="^\s*\zs:" end="$" end="\s#"me=e-2 + + " String And Character Constants: {{{1 + "================================ + syn match shNumber "-\=\<\d\+\>#\=" + syn match shCtrlSeq "\\\d\d\d\|\\[abcfnrtv0]" contained + if exists("b:is_bash") +- syn match shSpecial "\\\o\o\o\|\\x\x\x\|\\c.\|\\[abefnrtv]" contained ++ syn match shSpecial "\\\o\o\o\|\\x\x\x\|\\c[^"]\|\\[abefnrtv]" contained + endif + if exists("b:is_bash") + syn region shExSingleQuote matchgroup=shOperator start=+\$'+ skip=+\\\\\|\\.+ end=+'+ contains=shStringSpecial,shSpecial + else + syn region shExSingleQuote matchGroup=Error start=+\$'+ skip=+\\\\\|\\.+ end=+'+ contains=shStringSpecial + endif +-syn region shSingleQuote matchgroup=shOperator start=+'+ end=+'+ contains=shStringSpecial,@Spell ++syn region shSingleQuote matchgroup=shOperator start=+'+ end=+'+ contains=@Spell + syn region shDoubleQuote matchgroup=shOperator start=+"+ skip=+\\"+ end=+"+ contains=@shDblQuoteList,shStringSpecial,@Spell + syn match shStringSpecial "[^[:print:] \t]" contained + syn match shStringSpecial "\%(\\\\\)*\\[\\"'`$()#]" +-syn match shSpecial "[^\\]\zs\%(\\\\\)*\\[\\"'`$()#]" ++syn match shSpecial "[^\\]\zs\%(\\\\\)*\\[\\"'`$()#]" nextgroup=shMoreSpecial + syn match shSpecial "^\%(\\\\\)*\\[\\"'`$()#]" ++syn match shMoreSpecial "\%(\\\\\)*\\[\\"'`$()#]" nextgroup=shMoreSpecial contained + + " Comments: {{{1 + "========== +-syn cluster shCommentGroup contains=shTodo,@Spell +-syn keyword shTodo contained COMBAK FIXME TODO XXX +-syn match shComment "^\s*\zs#.*$" contains=@shCommentGroup +-syn match shComment "\s\zs#.*$" contains=@shCommentGroup +-syn match shQuickComment contained "#.*$" ++syn cluster shCommentGroup contains=shTodo,@Spell ++syn keyword shTodo contained COMBAK FIXME TODO XXX ++syn match shComment "^\s*\zs#.*$" contains=@shCommentGroup ++syn match shComment "\s\zs#.*$" contains=@shCommentGroup ++syn match shQuickComment contained "#.*$" + + " Here Documents: {{{1 + " ========================================= +@@ -338,13 +341,13 @@ + syn match shVariable "\<\([bwglsav]:\)\=[a-zA-Z0-9.!@_%+,]*\ze=" nextgroup=shSetIdentifier + syn match shSetIdentifier "=" contained nextgroup=shPattern,shDeref,shDerefSimple,shDoubleQuote,shSingleQuote,shExSingleQuote + if exists("b:is_bash") +- syn region shSetList oneline matchgroup=shSet start="\<\(declare\|typeset\|local\|export\|unset\)\>\ze[^/]" end="$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze#\|=" contains=@shIdList +- syn region shSetList oneline matchgroup=shSet start="\<set\>\ze[^/]" end="\ze[;|)]\|$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze[#=]" contains=@shIdList ++ syn region shSetList oneline matchgroup=shSet start="\<\(declare\|typeset\|local\|export\|unset\)\>\ze[^/]" end="$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze\s\+#\|=" contains=@shIdList ++ syn region shSetList oneline matchgroup=shSet start="\<set\>\ze[^/]" end="\ze[;|)]\|$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze\s\+[#=]" contains=@shIdList + elseif exists("b:is_kornshell") +- syn region shSetList oneline matchgroup=shSet start="\<\(typeset\|export\|unset\)\>\ze[^/]" end="$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze[#=]" contains=@shIdList +- syn region shSetList oneline matchgroup=shSet start="\<set\>\ze[^/]" end="$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze[#=]" contains=@shIdList ++ syn region shSetList oneline matchgroup=shSet start="\<\(typeset\|export\|unset\)\>\ze[^/]" end="$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze\s\+[#=]" contains=@shIdList ++ syn region shSetList oneline matchgroup=shSet start="\<set\>\ze[^/]" end="$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze\s\+[#=]" contains=@shIdList + else +- syn region shSetList oneline matchgroup=shSet start="\<\(set\|export\|unset\)\>\ze[^/]" end="$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze[#=]" contains=@shIdList ++ syn region shSetList oneline matchgroup=shSet start="\<\(set\|export\|unset\)\>\ze[^/]" end="$" matchgroup=shOperator end="\ze[}|);&]" matchgroup=NONE end="\ze\s\+[#=]" contains=@shIdList + endif + + " Functions: {{{1 +@@ -492,7 +495,7 @@ + hi def link shCaseSingleQuote shSingleQuote + hi def link shCaseStart shConditional + hi def link shCmdSubRegion shShellVariables +-hi def link shColon shStatement ++hi def link shColon shComment + hi def link shDerefOp shOperator + hi def link shDerefPOL shDerefOp + hi def link shDerefPPS shDerefOp +@@ -511,6 +514,7 @@ + hi def link shHereDoc shString + hi def link shHerePayload shHereDoc + hi def link shLoop shStatement ++hi def link shMoreSpecial shSpecial + hi def link shOption shCommandSub + hi def link shPattern shString + hi def link shParen shArithmetic +diff -u -r --new-file runtime/syntax.orig/sisu.vim runtime/syntax/sisu.vim +--- runtime/syntax.orig/sisu.vim 2008-05-27 14:24:19.000000000 -0500 ++++ runtime/syntax/sisu.vim 2008-11-09 07:12:28.000000000 -0600 +@@ -1,6 +1,6 @@ + "SiSU Vim syntax file + "SiSU Maintainer: Ralph Amissah <ralph@amissah.com> +-"SiSU Markup: SiSU (sisu-0.66.0, 2008-02-24) ++"SiSU Markup: SiSU (sisu-0.69.0, 2008-09-16) + "(originally looked at Ruby Vim by Mirko Nasato) + + if version < 600 +@@ -81,6 +81,7 @@ + syn region sisu_comment matchgroup=sisu_comment start="^%\{1,2\} " end="$" + "font face curly brackets + "syn region sisu_identifier contains=sisu_strikeout,sisu_number,sisu_control,sisu_identifier,sisu_error matchgroup=sisu_sem start="\S\+:{" end="}:[^<>,.!?:; ]\+" oneline ++syn region sisu_index matchgroup=sisu_index_block start="^={" end="}" + syn region sisu_control contains=sisu_strikeout,sisu_number,sisu_control,sisu_identifier,sisu_error matchgroup=sisu_fontface start="\*{" end="}\*" + syn region sisu_control contains=sisu_strikeout,sisu_number,sisu_control,sisu_identifier,sisu_error matchgroup=sisu_fontface start="!{" end="}!" + syn region sisu_underline contains=sisu_strikeout,sisu_number,sisu_control,sisu_identifier,sisu_error matchgroup=sisu_fontface start="_{" end="}_" +@@ -162,7 +163,6 @@ + hi def link sisu_fontface Include + hi def link sisu_strikeout DiffDelete + hi def link sisu_content_alt Special +-hi def link sisu_sem_content String + hi def link sisu_sem_content SpecialKey + hi def link sisu_sem_block Special + hi def link sisu_sem_marker Visual +@@ -173,6 +173,8 @@ + hi def link sisu_sem_ex_content Comment + "hi def link sisu_sem_ex_content SpecialKey + hi def link sisu_sem_ex_block Comment ++hi def link sisu_index SpecialKey ++hi def link sisu_index_block Visual + hi def link sisu_content_endnote Special + hi def link sisu_control Define + hi def link sisu_ocn Include +diff -u -r --new-file runtime/syntax.orig/spec.vim runtime/syntax/spec.vim +--- runtime/syntax.orig/spec.vim 2005-01-04 03:46:51.000000000 -0600 ++++ runtime/syntax/spec.vim 2009-12-16 14:42:02.000000000 -0600 +@@ -1,8 +1,7 @@ + " Filename: spec.vim + " Purpose: Vim syntax file + " Language: SPEC: Build/install scripts for Linux RPM packages +-" Maintainer: Donovan Rebbechi elflord@pegasus.rutgers.edu +-" URL: http://pegasus.rutgers.edu/~elflord/vim/syntax/spec.vim ++" Maintainer: Donovan Rebbechi elflord@panix.com + " Last Change: Fri Dec 3 11:54 EST 2004 Marcin Dalecki + + " For version 5.x: Clear all syntax items +diff -u -r --new-file runtime/syntax.orig/spyce.vim runtime/syntax/spyce.vim +--- runtime/syntax.orig/spyce.vim 2004-06-07 09:32:36.000000000 -0500 ++++ runtime/syntax/spyce.vim 2009-11-28 06:33:43.000000000 -0600 +@@ -2,7 +2,7 @@ + " Language: SPYCE + " Maintainer: Rimon Barr <rimon AT acm DOT org> + " URL: http://spyce.sourceforge.net +-" Last Change: 2003 May 11 ++" Last Change: 2009 Nov 11 + + " For version 5.x: Clear all syntax items + " For version 6.x: Quit when a syntax file was already loaded +@@ -25,6 +25,7 @@ + else + runtime! syntax/html.vim + unlet b:current_syntax ++ syntax spell default " added by Bram + endif + + " include python +diff -u -r --new-file runtime/syntax.orig/sqlanywhere.vim runtime/syntax/sqlanywhere.vim +--- runtime/syntax.orig/sqlanywhere.vim 2008-02-06 14:32:21.000000000 -0600 ++++ runtime/syntax/sqlanywhere.vim 2009-10-08 16:18:57.000000000 -0500 +@@ -2,10 +2,11 @@ + " Vim syntax file + " Language: SQL, Adaptive Server Anywhere + " Maintainer: David Fishburn <fishburn at ianywhere dot com> +-" Last Change: Tue 29 Jan 2008 12:54:19 PM Eastern Standard Time +-" Version: 10.0.1 ++" Last Change: 2009 Mar 15 ++" Version: 11.0.1 + +-" Description: Updated to Adaptive Server Anywhere 10.0.1 ++" Description: Updated to Adaptive Server Anywhere 11.0.1 ++" Updated to Adaptive Server Anywhere 10.0.1 + " Updated to Adaptive Server Anywhere 9.0.2 + " Updated to Adaptive Server Anywhere 9.0.1 + " Updated to Adaptive Server Anywhere 9.0.0 +@@ -54,20 +55,24 @@ + syn keyword sqlFunction strtouuid varexists + + " 9.0.1 functions +-syn keyword sqlFunction acos asin atan atn2 cast ceiling convert cos cot ++syn keyword sqlFunction acos asin atan atn2 cast ceiling convert cos cot + syn keyword sqlFunction char_length coalesce dateformat datetime degrees exp +-syn keyword sqlFunction floor getdate insertstr ++syn keyword sqlFunction floor getdate insertstr + syn keyword sqlFunction log log10 lower mod pi power +-syn keyword sqlFunction property radians replicate round sign sin ++syn keyword sqlFunction property radians replicate round sign sin + syn keyword sqlFunction sqldialect tan truncate truncnum + syn keyword sqlFunction base64_encode base64_decode + syn keyword sqlFunction hash compress decompress encrypt decrypt + ++" 11.0.1 functions ++syn keyword sqlFunction connection_extended_property text_handle_vector_match ++syn keyword sqlFunction read_client_file write_client_file ++ + " string functions + syn keyword sqlFunction ascii char left ltrim repeat + syn keyword sqlFunction space right rtrim trim lcase ucase + syn keyword sqlFunction locate charindex patindex replace +-syn keyword sqlFunction errormsg csconvert ++syn keyword sqlFunction errormsg csconvert + + " property functions + syn keyword sqlFunction db_id db_name property_name +@@ -358,125 +363,135 @@ + syn keyword sqlFunction sa_set_http_header sa_set_http_option + syn keyword sqlFunction sa_http_variable_info sa_http_header_info + +-" http functions 9.0.1 ++" http functions 9.0.1 + syn keyword sqlFunction http_encode http_decode + syn keyword sqlFunction html_encode html_decode + + " keywords +-syn keyword sqlKeyword absolute accent action activ add address after +-syn keyword sqlKeyword algorithm allow_dup_row +-syn keyword sqlKeyword alter and any as append asc ascii ase at atomic +-syn keyword sqlKeyword attach attended audit authorization ++syn keyword sqlKeyword absolute accent action active add address aes_decrypt ++syn keyword sqlKeyword after aggregate algorithm allow_dup_row allowed ++syn keyword sqlKeyword alter and ansi_substring any as append apply asc ascii ase ++syn keyword sqlKeyword assign at atan2 atomic attach attended audit authorization + syn keyword sqlKeyword autoincrement autostop batch bcp before +-syn keyword sqlKeyword between blank blanks block +-syn keyword sqlKeyword both bottom unbounded break bufferpool ++syn keyword sqlKeyword between bit_and bit_length bit_or bit_substr bit_xor ++syn keyword sqlKeyword blank blanks block ++syn keyword sqlKeyword both bottom unbounded break breaker bufferpool + syn keyword sqlKeyword build bulk by byte bytes cache calibrate calibration + syn keyword sqlKeyword cancel capability cascade cast +-syn keyword sqlKeyword catalog changes char char_convert check checksum ++syn keyword sqlKeyword catalog ceil changes char char_convert check checksum + syn keyword sqlKeyword class classes client cmp +-syn keyword sqlKeyword cluster clustered collation column columns ++syn keyword sqlKeyword cluster clustered collation ++syn keyword sqlKeyword column columns + syn keyword sqlKeyword command comment committed comparisons + syn keyword sqlKeyword compatible component compressed compute computes +-syn keyword sqlKeyword concat confirm conflict connection ++syn keyword sqlKeyword concat configuration confirm conflict connection + syn keyword sqlKeyword console consolidate consolidated +-syn keyword sqlKeyword constraint constraints continue +-syn keyword sqlKeyword convert copy count crc cross cube ++syn keyword sqlKeyword constraint constraints content continue ++syn keyword sqlKeyword convert coordinator copy count count_set_bits ++syn keyword sqlKeyword crc createtime cross cube cume_dist + syn keyword sqlKeyword current cursor data data database + syn keyword sqlKeyword current_timestamp current_user +-syn keyword sqlKeyword datatype dba dbfile +-syn keyword sqlKeyword dbspace dbspacename debug decoupled +-syn keyword sqlKeyword decrypted default defaults deferred definition ++syn keyword sqlKeyword databases datatype dba dbfile ++syn keyword sqlKeyword dbspace dbspaces dbspacename debug decoupled ++syn keyword sqlKeyword decrypted default defaults default_dbspace deferred ++syn keyword sqlKeyword definer definition + syn keyword sqlKeyword delay deleting delimited dependencies desc + syn keyword sqlKeyword description detach deterministic directory +-syn keyword sqlKeyword disable disabled distinct do domain download ++syn keyword sqlKeyword disable disabled distinct do domain download duplicate + syn keyword sqlKeyword dsetpass dttm dynamic each editproc ejb +-syn keyword sqlKeyword else elseif enable encapsulated encrypted end +-syn keyword sqlKeyword encoding endif engine erase error escape escapes event +-syn keyword sqlKeyword every except exception exclude exclusive exec +-syn keyword sqlKeyword existing exists expanded express ++syn keyword sqlKeyword else elseif empty enable encapsulated encrypted end ++syn keyword sqlKeyword encoding endif engine environment erase error escape escapes event ++syn keyword sqlKeyword event_parameter every except exception exclude excluded exclusive exec ++syn keyword sqlKeyword existing exists expanded expiry express exprtype extended_property + syn keyword sqlKeyword external externlogin factor failover false +-syn keyword sqlKeyword fastfirstrow fieldproc file filler +-syn keyword sqlKeyword fillfactor finish first first_keyword +-syn keyword sqlKeyword following force foreign format +-syn keyword sqlKeyword freepage french fresh full function go global +-syn keyword sqlKeyword group handler hash having header hexadecimal +-syn keyword sqlKeyword hidden high history hold holdlock +-syn keyword sqlKeyword hours id identified identity ignore ++syn keyword sqlKeyword fastfirstrow fieldproc file files filler ++syn keyword sqlKeyword fillfactor finish first first_keyword first_value ++syn keyword sqlKeyword following force foreign format forxml forxml_sep fp frame ++syn keyword sqlKeyword freepage french fresh full function gb get_bit go global ++syn keyword sqlKeyword group handler hash having header hexadecimal ++syn keyword sqlKeyword hidden high history hg hng hold holdlock host ++syn keyword sqlKeyword hours http_body http_session_timeout id identified identity ignore + syn keyword sqlKeyword ignore_dup_key ignore_dup_row immediate +-syn keyword sqlKeyword in inactive inactivity incremental index info ++syn keyword sqlKeyword in inactiv inactive inactivity included incremental ++syn keyword sqlKeyword index index_enabled index_lparen indexonly info + syn keyword sqlKeyword inline inner inout insensitive inserting + syn keyword sqlKeyword instead integrated +-syn keyword sqlKeyword internal into introduced iq is isolation jar java ++syn keyword sqlKeyword internal intersection into introduced invoker iq is isolation ++syn keyword sqlKeyword jar java java_location java_main_userid java_vm_options + syn keyword sqlKeyword jconnect jdk join kb key keep kerberos language last +-syn keyword sqlKeyword last_keyword lateral left level like +-syn keyword sqlKeyword limit local location log +-syn keyword sqlKeyword logging login logscan long low lru main +-syn keyword sqlKeyword match materialized max maximum membership +-syn keyword sqlKeyword minutes mirror mode modify monitor mru +-syn keyword sqlKeyword name named national native natural new next no ++syn keyword sqlKeyword last_keyword last_value lateral ld left len lf ln level like ++syn keyword sqlKeyword limit local location log ++syn keyword sqlKeyword logging login logscan long low lru main manual mark ++syn keyword sqlKeyword match matched materialized max maximum mb membership ++syn keyword sqlKeyword merge metadata methods minimum minutes mirror mode modify monitor move mru ++syn keyword sqlKeyword multiplex name named national native natural new next no + syn keyword sqlKeyword noholdlock nolock nonclustered none not +-syn keyword sqlKeyword notify null nulls of off old on +-syn keyword sqlKeyword only optimization optimizer option ++syn keyword sqlKeyword notify null nullable_constant nulls object oem_string of off offline ++syn keyword sqlKeyword old on online only openstring optimization optimizer option + syn keyword sqlKeyword or order others out outer over + syn keyword sqlKeyword package packetsize padding page pages +-syn keyword sqlKeyword paglock parallel part partition partner password path +-syn keyword sqlKeyword pctfree plan preceding precision prefetch prefix +-syn keyword sqlKeyword preserve preview primary +-syn keyword sqlKeyword prior priqty private privileges procedure profile +-syn keyword sqlKeyword public publication publish publisher +-syn keyword sqlKeyword quote quotes range readcommitted readonly ++syn keyword sqlKeyword paglock parallel part partial partition partitions partner password path ++syn keyword sqlKeyword pctfree plan policy populate port postfilter preceding precision ++syn keyword sqlKeyword prefetch prefilter prefix preserve preview primary ++syn keyword sqlKeyword prior priority priqty private privileges procedure profile ++syn keyword sqlKeyword property_is_cumulative property_is_numeric public publication publish publisher ++syn keyword sqlKeyword quiesce quote quotes range readclientfile readcommitted reader readfile readonly + syn keyword sqlKeyword readpast readuncommitted readwrite rebuild + syn keyword sqlKeyword received recompile recover recursive references +-syn keyword sqlKeyword referencing refresh relative relocate ++syn keyword sqlKeyword referencing refresh regex regexp regexp_substr relative relocate + syn keyword sqlKeyword rename repeatable repeatableread +-syn keyword sqlKeyword replicate rereceive resend reserve reset ++syn keyword sqlKeyword replicate request_timeout required rereceive resend reserve reset + syn keyword sqlKeyword resizing resolve resource respect + syn keyword sqlKeyword restrict result retain +-syn keyword sqlKeyword returns right +-syn keyword sqlKeyword rollup root row rowlock rows save +-syn keyword sqlKeyword schedule schema scripted scroll seconds secqty ++syn keyword sqlKeyword returns reverse right role ++syn keyword sqlKeyword rollup root row row_number rowlock rows save ++syn keyword sqlKeyword sa_index_hash sa_internal_fk_verify sa_internal_termbreak ++syn keyword sqlKeyword sa_order_preserving_hash sa_order_preserving_hash_big sa_order_preserving_hash_prefix ++syn keyword sqlKeyword schedule schema scope scripted scroll seconds secqty security + syn keyword sqlKeyword send sensitive sent serializable +-syn keyword sqlKeyword server server session sets ++syn keyword sqlKeyword server server session set_bit set_bits sets + syn keyword sqlKeyword share simple since site size skip +-syn keyword sqlKeyword snapshot soapheader some sorted_data +-syn keyword sqlKeyword sqlcode sqlid sqlstate stacker stale statement +-syn keyword sqlKeyword statistics status stogroup store +-syn keyword sqlKeyword strip subpages subscribe subscription +-syn keyword sqlKeyword subtransaction synchronization ++syn keyword sqlKeyword snapshot soapheader soap_header split some sorted_data ++syn keyword sqlKeyword sqlcode sqlid sqlflagger sqlstate sqrt square ++syn keyword sqlKeyword stacker stale statement statistics status stddev_pop stddev_samp ++syn keyword sqlKeyword stemmer stogroup stoplist store ++syn keyword sqlKeyword strip stripesizekb striping subpages subscribe subscription ++syn keyword sqlKeyword subtransaction suser_id suser_name synchronization + syn keyword sqlKeyword syntax_error table tablock +-syn keyword sqlKeyword tablockx tb temp template temporary then +-syn keyword sqlKeyword ties timezone to top tracing +-syn keyword sqlKeyword transaction transactional tries true ++syn keyword sqlKeyword tablockx tb temp template temporary term then ++syn keyword sqlKeyword ties timezone to to_char to_nchar top traced_plan tracing ++syn keyword sqlKeyword transfer transaction transactional tries true + syn keyword sqlKeyword tsequal type tune uncommitted unconditionally +-syn keyword sqlKeyword unenforced unique union unknown unload +-syn keyword sqlKeyword updating updlock upgrade upload use user ++syn keyword sqlKeyword unenforced unicode unique union unistr unknown unlimited unload ++syn keyword sqlKeyword unpartition unquiesce updatetime updating updlock upgrade upload ++syn keyword sqlKeyword upper use user + syn keyword sqlKeyword using utc utilities validproc + syn keyword sqlKeyword value values varchar variable +-syn keyword sqlKeyword varying vcat verify view virtual wait +-syn keyword sqlKeyword warning web when where window with with_auto ++syn keyword sqlKeyword varying var_pop var_samp vcat verify versions view virtual wait ++syn keyword sqlKeyword warning wd web when where window with with_auto + syn keyword sqlKeyword with_auto with_cube with_rollup without +-syn keyword sqlKeyword with_lparen within word work workload writefile +-syn keyword sqlKeyword writers writeserver xlock zeros ++syn keyword sqlKeyword with_lparen within word work workload write writefile ++syn keyword sqlKeyword writeclientfile writer writers writeserver xlock zeros + " XML function support +-syn keyword sqlFunction openxml xmlelement xmlforest xmlgen xmlconcat xmlagg +-syn keyword sqlFunction xmlattributes ++syn keyword sqlFunction openxml xmlelement xmlforest xmlgen xmlconcat xmlagg ++syn keyword sqlFunction xmlattributes + syn keyword sqlKeyword raw auto elements explicit + " HTTP support +-syn keyword sqlKeyword authorization secure url service ++syn keyword sqlKeyword authorization secure url service next_soap_header + " HTTP 9.0.2 new procedure keywords + syn keyword sqlKeyword namespace certificate clientport proxy + " OLAP support 9.0.0 +-syn keyword sqlKeyword covar_pop covar_samp corr regr_slope regr_intercept ++syn keyword sqlKeyword covar_pop covar_samp corr regr_slope regr_intercept + syn keyword sqlKeyword regr_count regr_r2 regr_avgx regr_avgy + syn keyword sqlKeyword regr_sxx regr_syy regr_sxy + + " Alternate keywords + syn keyword sqlKeyword character dec options proc reference +-syn keyword sqlKeyword subtrans tran syn keyword ++syn keyword sqlKeyword subtrans tran syn keyword + + + syn keyword sqlOperator in any some all between exists +-syn keyword sqlOperator like escape not is and or ++syn keyword sqlOperator like escape not is and or + syn keyword sqlOperator intersect minus + syn keyword sqlOperator prior distinct + +@@ -496,43 +511,38 @@ + + + syn keyword sqlType char long varchar text +-syn keyword sqlType bigint decimal double float int integer numeric ++syn keyword sqlType bigint decimal double float int integer numeric + syn keyword sqlType smallint tinyint real + syn keyword sqlType money smallmoney +-syn keyword sqlType bit +-syn keyword sqlType date datetime smalldate time timestamp ++syn keyword sqlType bit ++syn keyword sqlType date datetime smalldate time timestamp + syn keyword sqlType binary image varbinary uniqueidentifier + syn keyword sqlType xml unsigned + " New types 10.0.0 + syn keyword sqlType varbit nchar nvarchar + + syn keyword sqlOption Allow_nulls_by_default ++syn keyword sqlOption Allow_read_client_file ++syn keyword sqlOption Allow_snapshot_isolation ++syn keyword sqlOption Allow_write_client_file + syn keyword sqlOption Ansi_blanks + syn keyword sqlOption Ansi_close_cursors_on_rollback +-syn keyword sqlOption Ansi_integer_overflow + syn keyword sqlOption Ansi_permissions ++syn keyword sqlOption Ansi_substring + syn keyword sqlOption Ansi_update_constraints + syn keyword sqlOption Ansinull +-syn keyword sqlOption Assume_distinct_servers + syn keyword sqlOption Auditing + syn keyword sqlOption Auditing_options +-syn keyword sqlOption Auto_commit +-syn keyword sqlOption Auto_refetch +-syn keyword sqlOption Automatic_timestamp + syn keyword sqlOption Background_priority +-syn keyword sqlOption Bell +-syn keyword sqlOption Blob_threshold + syn keyword sqlOption Blocking + syn keyword sqlOption Blocking_timeout + syn keyword sqlOption Chained +-syn keyword sqlOption Char_OEM_Translation + syn keyword sqlOption Checkpoint_time + syn keyword sqlOption Cis_option + syn keyword sqlOption Cis_rowset_size + syn keyword sqlOption Close_on_endtrans +-syn keyword sqlOption Command_delimiter +-syn keyword sqlOption Commit_on_exit +-syn keyword sqlOption Compression ++syn keyword sqlOption Collect_statistics_on_dml_updates ++syn keyword sqlOption Conn_auditing + syn keyword sqlOption Connection_authentication + syn keyword sqlOption Continue_after_raiserror + syn keyword sqlOption Conversion_error +@@ -543,125 +553,90 @@ + syn keyword sqlOption Date_order + syn keyword sqlOption Debug_messages + syn keyword sqlOption Dedicated_task ++syn keyword sqlOption Default_dbspace + syn keyword sqlOption Default_timestamp_increment + syn keyword sqlOption Delayed_commit_timeout + syn keyword sqlOption Delayed_commits +-syn keyword sqlOption Delete_old_logs +-syn keyword sqlOption Describe_Java_Format +-syn keyword sqlOption Divide_by_zero_error +-syn keyword sqlOption Echo + syn keyword sqlOption Escape_character + syn keyword sqlOption Exclude_operators + syn keyword sqlOption Extended_join_syntax +-syn keyword sqlOption External_remote_options + syn keyword sqlOption Fire_triggers + syn keyword sqlOption First_day_of_week +-syn keyword sqlOption Float_as_double + syn keyword sqlOption For_xml_null_treatment + syn keyword sqlOption Force_view_creation + syn keyword sqlOption Global_database_id +-syn keyword sqlOption Headings +-syn keyword sqlOption Input_format ++syn keyword sqlOption Http_session_timeout + syn keyword sqlOption Integrated_server_name + syn keyword sqlOption Isolation_level +-syn keyword sqlOption ISQL_command_timing +-syn keyword sqlOption ISQL_escape_character +-syn keyword sqlOption ISQL_field_separator +-syn keyword sqlOption ISQL_log +-syn keyword sqlOption ISQL_plan +-syn keyword sqlOption ISQL_plan_cursor_sensitivity +-syn keyword sqlOption ISQL_plan_cursor_writability +-syn keyword sqlOption ISQL_quote +-syn keyword sqlOption Java_heap_size +-syn keyword sqlOption Java_input_output +-syn keyword sqlOption Java_namespace_size +-syn keyword sqlOption Java_page_buffer_size ++syn keyword sqlOption Java_location ++syn keyword sqlOption Java_main_userid ++syn keyword sqlOption Java_vm_options + syn keyword sqlOption Lock_rejected_rows + syn keyword sqlOption Log_deadlocks +-syn keyword sqlOption Log_detailed_plans +-syn keyword sqlOption Log_max_requests + syn keyword sqlOption Login_mode + syn keyword sqlOption Login_procedure ++syn keyword sqlOption Materialized_view_optimization ++syn keyword sqlOption Max_client_statements_cached + syn keyword sqlOption Max_cursor_count + syn keyword sqlOption Max_hash_size + syn keyword sqlOption Max_plans_cached ++syn keyword sqlOption Max_priority ++syn keyword sqlOption Max_query_tasks + syn keyword sqlOption Max_recursive_iterations + syn keyword sqlOption Max_statement_count +-syn keyword sqlOption Max_work_table_hash_size ++syn keyword sqlOption Max_temp_space + syn keyword sqlOption Min_password_length + syn keyword sqlOption Nearest_century + syn keyword sqlOption Non_keywords +-syn keyword sqlOption NULLS +-syn keyword sqlOption ODBC_describe_binary_as_varbinary +-syn keyword sqlOption ODBC_distinguish_char_and_varchar +-syn keyword sqlOption On_Charset_conversion_failure +-syn keyword sqlOption On_error ++syn keyword sqlOption Odbc_describe_binary_as_varbinary ++syn keyword sqlOption Odbc_distinguish_char_and_varchar ++syn keyword sqlOption Oem_string ++syn keyword sqlOption On_charset_conversion_failure + syn keyword sqlOption On_tsql_error +-syn keyword sqlOption Optimistic_wait_for_commit + syn keyword sqlOption Optimization_goal + syn keyword sqlOption Optimization_level +-syn keyword sqlOption Optimization_logging + syn keyword sqlOption Optimization_workload +-syn keyword sqlOption Output_format +-syn keyword sqlOption Output_length +-syn keyword sqlOption Output_nulls +-syn keyword sqlOption Percent_as_comment + syn keyword sqlOption Pinned_cursor_percent_of_cache ++syn keyword sqlOption Post_login_procedure + syn keyword sqlOption Precision + syn keyword sqlOption Prefetch + syn keyword sqlOption Preserve_source_format + syn keyword sqlOption Prevent_article_pkey_update +-syn keyword sqlOption Qualify_owners +-syn keyword sqlOption Query_plan_on_open +-syn keyword sqlOption Quiet +-syn keyword sqlOption Quote_all_identifiers ++syn keyword sqlOption Priority ++syn keyword sqlOption Query_mem_timeout + syn keyword sqlOption Quoted_identifier + syn keyword sqlOption Read_past_deleted + syn keyword sqlOption Recovery_time + syn keyword sqlOption Remote_idle_timeout + syn keyword sqlOption Replicate_all +-syn keyword sqlOption Replication_error +-syn keyword sqlOption Replication_error_piece ++syn keyword sqlOption Request_timeout + syn keyword sqlOption Return_date_time_as_string +-syn keyword sqlOption Return_java_as_string +-syn keyword sqlOption RI_Trigger_time + syn keyword sqlOption Rollback_on_deadlock + syn keyword sqlOption Row_counts +-syn keyword sqlOption Save_remote_passwords + syn keyword sqlOption Scale +-syn keyword sqlOption Screen_format +-syn keyword sqlOption Sort_Collation +-syn keyword sqlOption SQL_flagger_error_level +-syn keyword sqlOption SQL_flagger_warning_level +-syn keyword sqlOption SQLConnect +-syn keyword sqlOption SQLStart +-syn keyword sqlOption SR_Date_Format +-syn keyword sqlOption SR_Time_Format +-syn keyword sqlOption SR_TimeStamp_Format +-syn keyword sqlOption Statistics ++syn keyword sqlOption Secure_feature_key ++syn keyword sqlOption Sort_collation ++syn keyword sqlOption Sql_flagger_error_level ++syn keyword sqlOption Sql_flagger_warning_level + syn keyword sqlOption String_rtruncation +-syn keyword sqlOption Subscribe_by_remote + syn keyword sqlOption Subsume_row_locks +-syn keyword sqlOption Suppress_TDS_debugging +-syn keyword sqlOption TDS_Empty_string_is_null ++syn keyword sqlOption Suppress_tds_debugging ++syn keyword sqlOption Synchronize_mirror_on_commit ++syn keyword sqlOption Tds_empty_string_is_null + syn keyword sqlOption Temp_space_limit_check +-syn keyword sqlOption Thread_count +-syn keyword sqlOption Thread_stack +-syn keyword sqlOption Thread_swaps + syn keyword sqlOption Time_format + syn keyword sqlOption Time_zone_adjustment + syn keyword sqlOption Timestamp_format +-syn keyword sqlOption Truncate_date_values + syn keyword sqlOption Truncate_timestamp_values +-syn keyword sqlOption Truncate_with_auto_commit +-syn keyword sqlOption Truncation_length +-syn keyword sqlOption Tsql_hex_constant ++syn keyword sqlOption Tsql_outer_joins + syn keyword sqlOption Tsql_variables ++syn keyword sqlOption Updatable_statement_isolation + syn keyword sqlOption Update_statistics ++syn keyword sqlOption Upgrade_database_capability + syn keyword sqlOption User_estimates +-syn keyword sqlOption Verify_all_columns +-syn keyword sqlOption Verify_threshold ++syn keyword sqlOption Verify_password_function + syn keyword sqlOption Wait_for_commit ++syn keyword sqlOption Webservice_namespace_host + + " Strings and characters: + syn region sqlString start=+"+ end=+"+ contains=@Spell +diff -u -r --new-file runtime/syntax.orig/sshconfig.vim runtime/syntax/sshconfig.vim +--- runtime/syntax.orig/sshconfig.vim 2006-03-05 15:55:08.000000000 -0600 ++++ runtime/syntax/sshconfig.vim 2009-07-26 06:44:10.000000000 -0500 +@@ -1,23 +1,21 @@ + " Vim syntax file +-" This is a GENERATED FILE. Please always refer to source file at the URI below. +-" Language: OpenSSH server configuration file (ssh_config) +-" Maintainer: David Ne\v{c}as (Yeti) <yeti@physics.muni.cz> +-" Last Change: 2006-03-05 +-" URL: http://trific.ath.cx/Ftp/vim/syntax/sshconfig.vim ++" Language: OpenSSH client configuration file (ssh_config) ++" Maintainer: David Necas (Yeti) <yeti@physics.muni.cz> ++" Last Change: 2009-07-09 + + " Setup + if version >= 600 +- if exists("b:current_syntax") +- finish +- endif ++ if exists("b:current_syntax") ++ finish ++ endif + else +- syntax clear ++ syntax clear + endif + + if version >= 600 +- setlocal iskeyword=_,-,a-z,A-Z,48-57 ++ setlocal iskeyword=_,-,a-z,A-Z,48-57 + else +- set iskeyword=_,-,a-z,A-Z,48-57 ++ set iskeyword=_,-,a-z,A-Z,48-57 + endif + + syn case ignore +@@ -28,19 +26,21 @@ + + " Constants + syn keyword sshconfigYesNo yes no ask +-syn keyword sshconfigCipher blowfish des 3des ++syn keyword sshconfigYesNo any auto + syn keyword sshconfigCipher aes128-cbc 3des-cbc blowfish-cbc cast128-cbc + syn keyword sshconfigCipher aes192-cbc aes256-cbc aes128-ctr aes256-ctr + syn keyword sshconfigCipher arcfour arcfour128 arcfour256 cast128-cbc + syn keyword sshconfigMAC hmac-md5 hmac-sha1 hmac-ripemd160 hmac-sha1-96 + syn keyword sshconfigMAC hmac-md5-96 ++syn match sshconfigMAC "\<umac-64@openssh\.com\>" + syn keyword sshconfigHostKeyAlg ssh-rsa ssh-dss + syn keyword sshconfigPreferredAuth hostbased publickey password + syn keyword sshconfigPreferredAuth keyboard-interactive + syn keyword sshconfigLogLevel QUIET FATAL ERROR INFO VERBOSE + syn keyword sshconfigLogLevel DEBUG DEBUG1 DEBUG2 DEBUG3 +-syn keyword sshconfigSysLogFacility DAEMON USER AUTH LOCAL0 LOCAL1 LOCAL2 +-syn keyword sshconfigSysLogFacility LOCAL3 LOCAL4 LOCAL5 LOCAL6 LOCAL7 ++syn keyword sshconfigSysLogFacility DAEMON USER AUTH AUTHPRIV LOCAL0 LOCAL1 ++syn keyword sshconfigSysLogFacility LOCAL2 LOCAL3 LOCAL4 LOCAL5 LOCAL6 LOCAL7 ++syn match sshconfigVar "%[rhpldun]\>" + syn match sshconfigSpecial "[*?]" + syn match sshconfigNumber "\d\+" + syn match sshconfigHostPort "\<\(\d\{1,3}\.\)\{3}\d\{1,3}\(:\d\+\)\?\>" +@@ -49,57 +49,68 @@ + + " Keywords + syn keyword sshconfigHostSect Host +-syn keyword sshconfigKeyword AddressFamily BatchMode BindAddress ++syn keyword sshconfigKeyword AddressFamily ++syn keyword sshconfigKeyword BatchMode BindAddress + syn keyword sshconfigKeyword ChallengeResponseAuthentication CheckHostIP + syn keyword sshconfigKeyword Cipher Ciphers ClearAllForwardings + syn keyword sshconfigKeyword Compression CompressionLevel ConnectTimeout + syn keyword sshconfigKeyword ConnectionAttempts ControlMaster +-syn keyword sshconfigKeyword ControlPath DynamicForward EnableSSHKeysign +-syn keyword sshconfigKeyword EscapeChar ForwardAgent ForwardX11 +-syn keyword sshconfigKeyword ForwardX11Trusted GSSAPIAuthentication ++syn keyword sshconfigKeyword ControlPath DynamicForward ++syn keyword sshconfigKeyword EnableSSHKeysign EscapeChar ExitOnForwardFailure ++syn keyword sshconfigKeyword ForwardAgent ForwardX11 ++syn keyword sshconfigKeyword ForwardX11Trusted ++syn keyword sshconfigKeyword GSSAPIAuthentication + syn keyword sshconfigKeyword GSSAPIDelegateCredentials GatewayPorts +-syn keyword sshconfigKeyword GlobalKnownHostsFile HostKeyAlgorithms +-syn keyword sshconfigKeyword HashKnownHosts KbdInteractiveDevices ++syn keyword sshconfigKeyword GlobalKnownHostsFile ++syn keyword sshconfigKeyword HostKeyAlgorithms HashKnownHosts + syn keyword sshconfigKeyword HostKeyAlias HostName HostbasedAuthentication +-syn keyword sshconfigKeyword IdentitiesOnly IdentityFile LocalForward +-syn keyword sshconfigKeyword LogLevel MACs NoHostAuthenticationForLocalhost +-syn keyword sshconfigKeyword NumberOfPasswordPrompts PasswordAuthentication ++syn keyword sshconfigKeyword IdentitiesOnly IdentityFile ++syn keyword sshconfigKeyword KbdInteractiveAuthentication KbdInteractiveDevices ++syn keyword sshconfigKeyword LocalCommand LocalForward LogLevel ++syn keyword sshconfigKeyword MACs ++syn keyword sshconfigKeyword NoHostAuthenticationForLocalhost ++syn keyword sshconfigKeyword NumberOfPasswordPrompts ++syn keyword sshconfigKeyword PasswordAuthentication PermitLocalCommand + syn keyword sshconfigKeyword Port PreferredAuthentications Protocol + syn keyword sshconfigKeyword ProxyCommand PubkeyAuthentication +-syn keyword sshconfigKeyword RSAAuthentication RemoteForward +-syn keyword sshconfigKeyword RhostsAuthentication RhostsRSAAuthentication ++syn keyword sshconfigKeyword PermitLocalCommand ++syn keyword sshconfigKeyword RSAAuthentication RemoteForward RekeyLimit ++syn keyword sshconfigKeyword RhostsRSAAuthentication + syn keyword sshconfigKeyword SendEnv ServerAliveCountMax ServerAliveInterval + syn keyword sshconfigKeyword SmartcardDevice StrictHostKeyChecking ++syn keyword sshconfigKeyword Tunnel TunnelDevice + syn keyword sshconfigKeyword TCPKeepAlive UsePrivilegedPort User +-syn keyword sshconfigKeyword UserKnownHostsFile VerifyHostKeyDNS XAuthLocation ++syn keyword sshconfigKeyword UserKnownHostsFile ++syn keyword sshconfigKeyword VerifyHostKeyDNS VisualHostKey ++syn keyword sshconfigKeyword XAuthLocation + + " Define the default highlighting + if version >= 508 || !exists("did_sshconfig_syntax_inits") +- if version < 508 +- let did_sshconfig_syntax_inits = 1 +- command -nargs=+ HiLink hi link <args> +- else +- command -nargs=+ HiLink hi def link <args> +- endif +- +- HiLink sshconfigComment Comment +- HiLink sshconfigTodo Todo +- HiLink sshconfigHostPort sshconfigConstant +- HiLink sshconfigNumber sshconfigConstant +- HiLink sshconfigConstant Constant +- HiLink sshconfigYesNo sshconfigEnum +- HiLink sshconfigCipher sshconfigEnum +- HiLink sshconfigMAC sshconfigEnum +- HiLink sshconfigHostKeyAlg sshconfigEnum +- HiLink sshconfigLogLevel sshconfigEnum +- HiLink sshconfigSysLogFacility sshconfigEnum +- HiLink sshconfigPreferredAuth sshconfigEnum +- HiLink sshconfigEnum Function +- HiLink sshconfigSpecial Special +- HiLink sshconfigKeyword Keyword +- HiLink sshconfigHostSect Type +- delcommand HiLink ++ if version < 508 ++ let did_sshconfig_syntax_inits = 1 ++ command -nargs=+ HiLink hi link <args> ++ else ++ command -nargs=+ HiLink hi def link <args> ++ endif ++ ++ HiLink sshconfigComment Comment ++ HiLink sshconfigTodo Todo ++ HiLink sshconfigHostPort sshconfigConstant ++ HiLink sshconfigNumber sshconfigConstant ++ HiLink sshconfigConstant Constant ++ HiLink sshconfigYesNo sshconfigEnum ++ HiLink sshconfigCipher sshconfigEnum ++ HiLink sshconfigMAC sshconfigEnum ++ HiLink sshconfigHostKeyAlg sshconfigEnum ++ HiLink sshconfigLogLevel sshconfigEnum ++ HiLink sshconfigSysLogFacility sshconfigEnum ++ HiLink sshconfigPreferredAuth sshconfigEnum ++ HiLink sshconfigVar sshconfigEnum ++ HiLink sshconfigEnum Identifier ++ HiLink sshconfigSpecial Special ++ HiLink sshconfigKeyword Keyword ++ HiLink sshconfigHostSect Type ++ delcommand HiLink + endif + + let b:current_syntax = "sshconfig" +- +diff -u -r --new-file runtime/syntax.orig/sshdconfig.vim runtime/syntax/sshdconfig.vim +--- runtime/syntax.orig/sshdconfig.vim 2006-03-05 15:55:08.000000000 -0600 ++++ runtime/syntax/sshdconfig.vim 2009-07-26 06:41:55.000000000 -0500 +@@ -1,23 +1,21 @@ + " Vim syntax file +-" This is a GENERATED FILE. Please always refer to source file at the URI below. + " Language: OpenSSH server configuration file (sshd_config) +-" Maintainer: David Ne\v{c}as (Yeti) <yeti@physics.muni.cz> +-" Last Change: 2006-03-05 +-" URL: http://trific.ath.cx/Ftp/vim/syntax/sshdconfig.vim ++" Maintainer: David Necas (Yeti) <yeti@physics.muni.cz> ++" Last Change: 2009-07-09 + + " Setup + if version >= 600 +- if exists("b:current_syntax") +- finish +- endif ++ if exists("b:current_syntax") ++ finish ++ endif + else +- syntax clear ++ syntax clear + endif + + if version >= 600 +- setlocal iskeyword=_,-,a-z,A-Z,48-57 ++ setlocal iskeyword=_,-,a-z,A-Z,48-57 + else +- set iskeyword=_,-,a-z,A-Z,48-57 ++ set iskeyword=_,-,a-z,A-Z,48-57 + endif + + syn case ignore +@@ -27,78 +25,87 @@ + syn keyword sshdconfigTodo TODO FIXME NOT contained + + " Constants +-syn keyword sshdconfigYesNo yes no ++syn keyword sshdconfigYesNo yes no none ++syn keyword sshdconfigAddressFamily any inet inet6 + syn keyword sshdconfigCipher aes128-cbc 3des-cbc blowfish-cbc cast128-cbc + syn keyword sshdconfigCipher aes192-cbc aes256-cbc aes128-ctr aes256-ctr + syn keyword sshdconfigCipher arcfour arcfour128 arcfour256 cast128-cbc + syn keyword sshdconfigMAC hmac-md5 hmac-sha1 hmac-ripemd160 hmac-sha1-96 + syn keyword sshdconfigMAC hmac-md5-96 ++syn match sshdconfigMAC "\<umac-64@openssh\.com\>" + syn keyword sshdconfigRootLogin without-password forced-commands-only + syn keyword sshdconfigLogLevel QUIET FATAL ERROR INFO VERBOSE + syn keyword sshdconfigLogLevel DEBUG DEBUG1 DEBUG2 DEBUG3 +-syn keyword sshdconfigSysLogFacility DAEMON USER AUTH LOCAL0 LOCAL1 LOCAL2 +-syn keyword sshdconfigSysLogFacility LOCAL3 LOCAL4 LOCAL5 LOCAL6 LOCAL7 ++syn keyword sshdconfigSysLogFacility DAEMON USER AUTH AUTHPRIV LOCAL0 LOCAL1 ++syn keyword sshdconfigSysLogFacility LOCAL2 LOCAL3 LOCAL4 LOCAL5 LOCAL6 LOCAL7 + syn match sshdconfigSpecial "[*?]" + syn match sshdconfigNumber "\d\+" + syn match sshdconfigHostPort "\<\(\d\{1,3}\.\)\{3}\d\{1,3}\(:\d\+\)\?\>" + syn match sshdconfigHostPort "\<\([-a-zA-Z0-9]\+\.\)\+[-a-zA-Z0-9]\{2,}\(:\d\+\)\?\>" ++" FIXME: this matches quite a few things which are NOT valid IPv6 addresses + syn match sshdconfigHostPort "\<\(\x\{,4}:\)\+\x\{,4}:\d\+\>" + syn match sshdconfigTime "\<\(\d\+[sSmMhHdDwW]\)\+\>" + + " Keywords +-syn keyword sshdconfigKeyword AcceptEnv AddressFamily ++syn keyword sshdconfigMatch Host User Group Address ++syn keyword sshdconfigKeyword AcceptEnv AddressFamily AllowAgentForwarding + syn keyword sshdconfigKeyword AllowGroups AllowTcpForwarding +-syn keyword sshdconfigKeyword AllowUsers AuthorizedKeysFile Banner +-syn keyword sshdconfigKeyword ChallengeResponseAuthentication ++syn keyword sshdconfigKeyword AllowUsers AuthorizedKeysFile ++syn keyword sshdconfigKeyword Banner ++syn keyword sshdconfigKeyword ChallengeResponseAuthentication ChrootDirectory + syn keyword sshdconfigKeyword Ciphers ClientAliveCountMax + syn keyword sshdconfigKeyword ClientAliveInterval Compression +-syn keyword sshdconfigKeyword DenyGroups DenyUsers GSSAPIAuthentication +-syn keyword sshdconfigKeyword GSSAPICleanupCredentials GatewayPorts +-syn keyword sshdconfigKeyword HostKey HostbasedAuthentication ++syn keyword sshdconfigKeyword DenyGroups DenyUsers ++syn keyword sshdconfigKeyword ForceCommand ++syn keyword sshdconfigKeyword GatewayPorts GSSAPIAuthentication ++syn keyword sshdconfigKeyword GSSAPICleanupCredentials ++syn keyword sshdconfigKeyword HostbasedAuthentication HostKey + syn keyword sshdconfigKeyword IgnoreRhosts IgnoreUserKnownHosts +-syn keyword sshdconfigKeyword KerberosAuthentication KerberosOrLocalPasswd +-syn keyword sshdconfigKeyword KerberosTgtPassing KerberosTicketCleanup +-syn keyword sshdconfigKeyword KerberosGetAFSToken +-syn keyword sshdconfigKeyword KeyRegenerationInterval ListenAddress +-syn keyword sshdconfigKeyword LogLevel LoginGraceTime MACs MaxAuthTries +-syn keyword sshdconfigKeyword MaxStartups PasswordAuthentication +-syn keyword sshdconfigKeyword PermitEmptyPasswords PermitRootLogin ++syn keyword sshdconfigKeyword KerberosAuthentication KerberosGetAFSToken ++syn keyword sshdconfigKeyword KerberosOrLocalPasswd KerberosTicketCleanup ++syn keyword sshdconfigKeyword KeyRegenerationInterval ++syn keyword sshdconfigKeyword ListenAddress LoginGraceTime LogLevel ++syn keyword sshdconfigKeyword MACs Match MaxAuthTries MaxSessions MaxStartups ++syn keyword sshdconfigKeyword PasswordAuthentication PermitEmptyPasswords ++syn keyword sshdconfigKeyword PermitRootLogin PermitOpen PermitTunnel + syn keyword sshdconfigKeyword PermitUserEnvironment PidFile Port + syn keyword sshdconfigKeyword PrintLastLog PrintMotd Protocol +-syn keyword sshdconfigKeyword PubkeyAuthentication RSAAuthentication +-syn keyword sshdconfigKeyword RhostsAuthentication RhostsRSAAuthentication +-syn keyword sshdconfigKeyword ServerKeyBits StrictModes Subsystem +-syn keyword sshdconfigKeyword ShowPatchLevel +-syn keyword sshdconfigKeyword SyslogFacility TCPKeepAlive UseDNS +-syn keyword sshdconfigKeyword UseLogin UsePAM UsePrivilegeSeparation ++syn keyword sshdconfigKeyword PubkeyAuthentication ++syn keyword sshdconfigKeyword RhostsRSAAuthentication RSAAuthentication ++syn keyword sshdconfigKeyword ServerKeyBits ShowPatchLevel StrictModes ++syn keyword sshdconfigKeyword Subsystem SyslogFacility ++syn keyword sshdconfigKeyword TCPKeepAlive ++syn keyword sshdconfigKeyword UseDNS UseLogin UsePAM UsePrivilegeSeparation + syn keyword sshdconfigKeyword X11DisplayOffset X11Forwarding + syn keyword sshdconfigKeyword X11UseLocalhost XAuthLocation + + " Define the default highlighting + if version >= 508 || !exists("did_sshdconfig_syntax_inits") +- if version < 508 +- let did_sshdconfig_syntax_inits = 1 +- command -nargs=+ HiLink hi link <args> +- else +- command -nargs=+ HiLink hi def link <args> +- endif +- +- HiLink sshdconfigComment Comment +- HiLink sshdconfigTodo Todo +- HiLink sshdconfigHostPort sshdconfigConstant +- HiLink sshdconfigTime sshdconfigConstant +- HiLink sshdconfigNumber sshdconfigConstant +- HiLink sshdconfigConstant Constant +- HiLink sshdconfigYesNo sshdconfigEnum +- HiLink sshdconfigCipher sshdconfigEnum +- HiLink sshdconfigMAC sshdconfigEnum +- HiLink sshdconfigRootLogin sshdconfigEnum +- HiLink sshdconfigLogLevel sshdconfigEnum +- HiLink sshdconfigSysLogFacility sshdconfigEnum +- HiLink sshdconfigEnum Function +- HiLink sshdconfigSpecial Special +- HiLink sshdconfigKeyword Keyword +- delcommand HiLink ++ if version < 508 ++ let did_sshdconfig_syntax_inits = 1 ++ command -nargs=+ HiLink hi link <args> ++ else ++ command -nargs=+ HiLink hi def link <args> ++ endif ++ ++ HiLink sshdconfigComment Comment ++ HiLink sshdconfigTodo Todo ++ HiLink sshdconfigHostPort sshdconfigConstant ++ HiLink sshdconfigTime sshdconfigConstant ++ HiLink sshdconfigNumber sshdconfigConstant ++ HiLink sshdconfigConstant Constant ++ HiLink sshdconfigYesNo sshdconfigEnum ++ HiLink sshdconfigAddressFamily sshdconfigEnum ++ HiLink sshdconfigCipher sshdconfigEnum ++ HiLink sshdconfigMAC sshdconfigEnum ++ HiLink sshdconfigRootLogin sshdconfigEnum ++ HiLink sshdconfigLogLevel sshdconfigEnum ++ HiLink sshdconfigSysLogFacility sshdconfigEnum ++ HiLink sshdconfigEnum Function ++ HiLink sshdconfigSpecial Special ++ HiLink sshdconfigKeyword Keyword ++ HiLink sshdconfigMatch Type ++ delcommand HiLink + endif + + let b:current_syntax = "sshdconfig" +diff -u -r --new-file runtime/syntax.orig/taskdata.vim runtime/syntax/taskdata.vim +--- runtime/syntax.orig/taskdata.vim 1969-12-31 18:00:00.000000000 -0600 ++++ runtime/syntax/taskdata.vim 2009-07-26 06:44:44.000000000 -0500 +@@ -0,0 +1,43 @@ ++" Vim syntax file ++" Language: task data ++" Maintainer: John Florian <jflorian@doubledog.org> ++" Updated: Wed Jul 8 19:46:20 EDT 2009 ++ ++ ++" For version 5.x: Clear all syntax items. ++" For version 6.x: Quit when a syntax file was already loaded. ++if version < 600 ++ syntax clear ++elseif exists("b:current_syntax") ++ finish ++endif ++ ++" Key Names for values. ++syn keyword taskdataKey description due end entry imask mask parent ++syn keyword taskdataKey priority project recur start status tags uuid ++syn match taskdataKey "annotation_\d\+" ++syn match taskdataUndo "^time.*$" ++syn match taskdataUndo "^\(old \|new \|---\)" ++ ++" Values associated with key names. ++" ++" Strings ++syn region taskdataString matchgroup=Normal start=+"+ end=+"+ ++ \ contains=taskdataEncoded,taskdataUUID,@Spell ++" ++" Special Embedded Characters (e.g., ",") ++syn match taskdataEncoded "&\a\+;" contained ++" UUIDs ++syn match taskdataUUID "\x\{8}-\(\x\{4}-\)\{3}\x\{12}" contained ++ ++ ++" The default methods for highlighting. Can be overridden later. ++hi def link taskdataEncoded Function ++hi def link taskdataKey Statement ++hi def link taskdataString String ++hi def link taskdataUUID Special ++hi def link taskdataUndo Type ++ ++let b:current_syntax = "taskdata" ++ ++" vim:noexpandtab +diff -u -r --new-file runtime/syntax.orig/taskedit.vim runtime/syntax/taskedit.vim +--- runtime/syntax.orig/taskedit.vim 1969-12-31 18:00:00.000000000 -0600 ++++ runtime/syntax/taskedit.vim 2009-07-26 06:44:44.000000000 -0500 +@@ -0,0 +1,35 @@ ++" Vim syntax file ++" Language: support for 'task 42 edit' ++" Maintainer: John Florian <jflorian@doubledog.org> ++" Updated: Wed Jul 8 19:46:32 EDT 2009 ++ ++ ++" For version 5.x: Clear all syntax items. ++" For version 6.x: Quit when a syntax file was already loaded. ++if version < 600 ++ syntax clear ++elseif exists("b:current_syntax") ++ finish ++endif ++ ++syn match taskeditHeading "^\s*#\s*Name\s\+Editable details\s*$" contained ++syn match taskeditHeading "^\s*#\s*-\+\s\+-\+\s*$" contained ++syn match taskeditReadOnly "^\s*#\s*\(UU\)\?ID:.*$" contained ++syn match taskeditReadOnly "^\s*#\s*Status:.*$" contained ++syn match taskeditReadOnly "^\s*#\s*i\?Mask:.*$" contained ++syn match taskeditKey "^ *.\{-}:" nextgroup=taskeditString ++syn match taskeditComment "^\s*#.*$" ++ \ contains=taskeditReadOnly,taskeditHeading ++syn match taskeditString ".*$" contained contains=@Spell ++ ++ ++" The default methods for highlighting. Can be overridden later. ++hi def link taskeditComment Comment ++hi def link taskeditHeading Function ++hi def link taskeditKey Statement ++hi def link taskeditReadOnly Special ++hi def link taskeditString String ++ ++let b:current_syntax = "taskedit" ++ ++" vim:noexpandtab +diff -u -r --new-file runtime/syntax.orig/tcl.vim runtime/syntax/tcl.vim +--- runtime/syntax.orig/tcl.vim 2006-11-17 13:25:54.000000000 -0600 ++++ runtime/syntax/tcl.vim 2009-06-03 05:07:39.000000000 -0500 +@@ -1,13 +1,16 @@ + " Vim syntax file +-" Language: TCL/TK +-" Maintainer: Brett Cannon <brett@python.org> ++" Language: Tcl/Tk ++" Maintainer: Taylor Venable <taylor@metasyntax.net> ++" (previously Brett Cannon <brett@python.org>) + " (previously Dean Copsey <copsey@cs.ucdavis.edu>) + " (previously Matt Neumann <mattneu@purpleturtle.com>) + " (previously Allan Kelly <allan@fruitloaf.co.uk>) + " Original: Robin Becker <robin@jessikat.demon.co.uk> +-" Last Change: 2006 Nov 17 ++" Last Change: 2009/04/06 02:38:36 ++" Version: 1.13 ++" URL: http://real.metasyntax.net:2357/cvs/cvsweb.cgi/Config/vim/syntax/tcl.vim + " +-" Keywords TODO: format clock click anchor ++" Keywords TODO: click anchor + + " For version 5.x: Clear all syntax items + " For version 6.x: Quit when a syntax file was already loaded +@@ -17,19 +20,40 @@ + finish + endif + +-" A bunch of useful keywords +-syn keyword tclStatement tell socket subst open eof pwd glob list exec pid +-syn keyword tclStatement auto_load_index time unknown eval lrange fblocked +-syn keyword tclStatement lsearch auto_import gets lappend proc variable llength +-syn keyword tclStatement auto_execok return linsert error catch clock info +-syn keyword tclStatement split array fconfigure concat join lreplace source +-syn keyword tclStatement fcopy global auto_qualify update close cd auto_load +-syn keyword tclStatement file append format read package set binary namespace +-syn keyword tclStatement scan trace seek flush after vwait uplevel lset rename +-syn keyword tclStatement fileevent regexp upvar unset encoding expr load regsub +-syn keyword tclStatement interp exit puts incr lindex lsort tclLog string ++" Basic Tcl commands: http://www.tcl.tk/man/tcl8.5/TclCmd/contents.htm ++syn keyword tclCommand after append apply array bgerror binary catch cd chan clock ++syn keyword tclCommand close concat dde dict encoding eof error eval exec exit ++syn keyword tclCommand expr fblocked fconfigure fcopy file fileevent filename flush ++syn keyword tclCommand format gets glob global history incr info interp join ++syn keyword tclCommand lappend lassign lindex linsert list llength load lrange lrepeat ++syn keyword tclCommand lreplace lreverse lsearch lset lsort memory namespace open package ++syn keyword tclCommand pid proc puts pwd read regexp registry regsub rename return ++syn keyword tclCommand scan seek set socket source split string subst tell time ++syn keyword tclCommand trace unknown unload unset update uplevel upvar variable vwait ++ ++" The 'Tcl Standard Library' commands: http://www.tcl.tk/man/tcl8.5/TclCmd/library.htm ++syn keyword tclCommand auto_execok auto_import auto_load auto_mkindex auto_mkindex_old ++syn keyword tclCommand auto_qualify auto_reset parray tcl_endOfWord tcl_findLibrary ++syn keyword tclCommand tcl_startOfNextWord tcl_startOfPreviousWord tcl_wordBreakAfter ++syn keyword tclCommand tcl_wordBreakBefore ++ ++" Commands that were added in Tcl 8.6 ++ ++syn keyword tclCommand my oo::copy oo::define oo::objdefine self ++syn keyword tclCommand coroutine tailcall throw yield ++ ++" Global variables used by Tcl: http://www.tcl.tk/man/tcl8.5/TclCmd/tclvars.htm ++syn keyword tclVars env errorCode errorInfo tcl_library tcl_patchLevel tcl_pkgPath ++syn keyword tclVars tcl_platform tcl_precision tcl_rcFileName tcl_traceCompile ++syn keyword tclVars tcl_traceExec tcl_wordchars tcl_nonwordchars tcl_version argc argv ++syn keyword tclVars argv0 tcl_interactive geometry ++ ++" Strings which expr accepts as boolean values, aside from zero / non-zero. ++syn keyword tclBoolean true false on off yes no ++ + syn keyword tclLabel case default + syn keyword tclConditional if then else elseif switch ++syn keyword tclConditional try finally + syn keyword tclRepeat while for foreach break continue + syn keyword tcltkSwitch contained insert create polygon fill outline tag + +@@ -63,9 +87,14 @@ + syn keyword tcltkWidgetSwitch contained delete names types create + " variable reference + " ::optional::namespaces +-syn match tclVarRef "$\(\(::\)\?\([[:alnum:]_.]*::\)*\)\a[a-zA-Z0-9_.]*" ++syn match tclVarRef "$\(\(::\)\?\([[:alnum:]_]*::\)*\)\a[[:alnum:]_]*" + " ${...} may contain any character except '}' + syn match tclVarRef "${[^}]*}" ++ ++" The syntactic unquote-splicing replacement for [expand]. ++syn match tclExpand '\s{\*}' ++syn match tclExpand '^{\*}' ++ + " menu, mane add + syn keyword tcltkWidgetSwitch contained active end last none cascade checkbutton command radiobutton separator + syn keyword tcltkWidgetSwitch contained activebackground actveforeground accelerator background bitmap columnbreak +@@ -130,11 +159,10 @@ + + " EXPR + " commands associated with expr +-syn keyword tcltkMaths contained acos cos hypot sinh +-syn keyword tcltkMaths contained asin cosh log sqrt +-syn keyword tcltkMaths contained atan exp log10 tan +-syn keyword tcltkMaths contained atan2 floor pow tanh +-syn keyword tcltkMaths contained ceil fmod sin ++syn keyword tcltkMaths contained abs acos asin atan atan2 bool ceil cos cosh double entier ++syn keyword tcltkMaths contained exp floor fmod hypot int isqrt log log10 max min pow rand ++syn keyword tcltkMaths contained round sin sinh sqrt srand tan tanh wide ++ + syn region tcltkCommand matchgroup=tcltkCommandColor start="\<expr\>" matchgroup=NONE skip="^\s*$" end="]\|[^\\]*\s*$"me=e-1 contains=tclLineContinue,tcltkMaths,tclNumber,tclVarRef,tclString,tcltlWidgetSwitch,tcltkCommand,tcltkPackConf + + " format +@@ -165,17 +193,26 @@ + + syn keyword tclTodo contained TODO + ++" Sequences which are backslash-escaped: http://www.tcl.tk/man/tcl8.5/TclCmd/Tcl.htm#M16 ++" Octal, hexadecimal, unicode codepoints, and the classics. ++" Tcl takes as many valid characters in a row as it can, so \xAZ in a string is newline followed by 'Z'. ++syn match tclSpecial contained '\\\([0-7]\{1,3}\|x\x\{1,2}\|u\x\{1,4}\|[abfnrtv]\)' ++syn match tclSpecial contained '\\[\[\]\{\}\"\$]' + +-" String and Character contstants +-" Highlight special characters (those which have a backslash) differently +-syn match tclSpecial contained "\\\d\d\d\=\|\\." ++" Command appearing inside another command or inside a string. ++syn region tclEmbeddedStatement start='\[' end='\]' contained contains=tclCommand,tclNumber,tclLineContinue,tclString,tclVarRef,tclEmbeddedStatement + " A string needs the skip argument as it may legitimately contain \". + " Match at start of line + syn region tclString start=+^"+ end=+"+ contains=tclSpecial skip=+\\\\\|\\"+ + "Match all other legal strings. +-syn region tclString start=+[^\\]"+ms=s+1 end=+"+ contains=tclSpecial skip=+\\\\\|\\"+ ++syn region tclString start=+[^\\]"+ms=s+1 end=+"+ contains=tclSpecial,tclVarRef,tclEmbeddedStatement skip=+\\\\\|\\"+ ++ ++" Line continuation is backslash immediately followed by newline. ++syn match tclLineContinue '\\$' + +-syn match tclLineContinue "\\\s*$" ++if exists('g:tcl_warn_continuation') ++ syn match tclNotLineContinue '\\\s\+$' ++endif + + "integer number, or floating point number without a dot and with "f". + syn case ignore +@@ -208,13 +245,13 @@ + endif + + HiLink tcltkSwitch Special ++ HiLink tclExpand Special + HiLink tclLabel Label + HiLink tclConditional Conditional + HiLink tclRepeat Repeat + HiLink tclNumber Number + HiLink tclError Error +- HiLink tclStatement Statement +- "HiLink tclStatementColor Statement ++ HiLink tclCommand Statement + HiLink tclString String + HiLink tclComment Comment + HiLink tclSpecial Special +@@ -223,6 +260,9 @@ + HiLink tcltkCommandColor Statement + HiLink tcltkWidgetColor Structure + HiLink tclLineContinue WarningMsg ++if exists('g:tcl_warn_continuation') ++ HiLink tclNotLineContinue ErrorMsg ++endif + HiLink tcltkStringSwitch Special + HiLink tcltkArraySwitch Special + HiLink tcltkLsortSwitch Special +@@ -232,7 +272,6 @@ + HiLink tcltkNamespaceSwitch Special + HiLink tcltkWidgetSwitch Special + HiLink tcltkPackConfColor Identifier +- "HiLink tcltkLsort Statement + HiLink tclVarRef Identifier + + delcommand HiLink +@@ -240,4 +279,4 @@ + + let b:current_syntax = "tcl" + +-" vim: ts=8 ++" vim: ts=8 noet +diff -u -r --new-file runtime/syntax.orig/tcsh.vim runtime/syntax/tcsh.vim +--- runtime/syntax.orig/tcsh.vim 2007-06-17 06:20:06.000000000 -0500 ++++ runtime/syntax/tcsh.vim 2009-12-24 10:29:21.000000000 -0600 +@@ -1,6 +1,6 @@ + " tcsh.vim: Vim syntax file for tcsh scripts +-" Maintainer: Gautam Iyer <gi1242@users.sourceforge.net> +-" Modified: Sat 16 Jun 2007 04:52:12 PM PDT ++" Maintainer: Gautam Iyer <gi1242@gmail.com> ++" Modified: Thu 17 Dec 2009 06:05:07 PM EST + " + " Description: We break up each statement into a "command" and an "end" part. + " All groups are either a "command" or part of the "end" of a statement (ie +@@ -60,7 +60,7 @@ + " alias and unalias (contains special aliases) + syn keyword tcshAliases contained beepcmd cwdcmd jobcmd helpcommand periodic precmd postcmd shell + syn keyword tcshBuiltin nextgroup=tcshAliCmd skipwhite alias unalias +-syn match tcshAliCmd contained nextgroup=tcshAliEnd skipwhite '\v[\w-]+' contains=tcshAliases ++syn match tcshAliCmd contained nextgroup=tcshAliEnd skipwhite '\v(\w|-)+' contains=tcshAliases + syn region tcshAliEnd contained transparent matchgroup=tcshBuiltin start='' skip='\\$' end='$\|;' contains=@tcshStatementEnds + + " if statements +@@ -197,7 +197,11 @@ + + " ----- Synchronising ----- + if exists('tcsh_minlines') +- exec 'syn sync minlines=' . tcsh_minlines ++ if tcsh_minlines == 'fromstart' ++ syn sync fromstart ++ else ++ exec 'syn sync minlines=' . tcsh_minlines ++ endif + else + syn sync minlines=100 " Some completions can be quite long + endif +diff -u -r --new-file runtime/syntax.orig/tex.vim runtime/syntax/tex.vim +--- runtime/syntax.orig/tex.vim 2008-07-29 14:43:38.000000000 -0500 ++++ runtime/syntax/tex.vim 2010-01-12 14:39:39.000000000 -0600 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: TeX + " Maintainer: Dr. Charles E. Campbell, Jr. <NdrchipO@ScampbellPfamily.AbizM> +-" Last Change: Jun 03, 2008 +-" Version: 41 ++" Last Change: Dec 28, 2009 ++" Version: 46 + " URL: http://mysite.verizon.net/astronaut/vim/index.html#vimlinks_syntax + " + " Notes: {{{1 +@@ -103,6 +103,7 @@ + syn cluster texEnvGroup contains=texMatcher,texMathDelim,texSpecialChar,texStatement + syn cluster texFoldGroup contains=texAccent,texBadMath,texComment,texDefCmd,texDelimiter,texDocType,texInput,texInputFile,texLength,texLigature,texMatcher,texMathZoneV,texMathZoneW,texMathZoneX,texMathZoneY,texMathZoneZ,texNewCmd,texNewEnv,texOnlyMath,texOption,texParen,texRefZone,texSection,texSectionMarker,texSectionZone,texSpaceCode,texSpecialChar,texStatement,texString,texTypeSize,texTypeStyle,texZone,@texMathZones,texTitle,texAbstract + syn cluster texMatchGroup contains=texAccent,texBadMath,texComment,texDefCmd,texDelimiter,texDocType,texInput,texLength,texLigature,texMatcher,texNewCmd,texNewEnv,texOnlyMath,texParen,texRefZone,texSection,texSpecialChar,texStatement,texString,texTypeSize,texTypeStyle,texZone,texInputFile,texOption,@Spell ++syn cluster texStyleGroup contains=texAccent,texBadMath,texComment,texDefCmd,texDelimiter,texDocType,texInput,texLength,texLigature,texNewCmd,texNewEnv,texOnlyMath,texParen,texRefZone,texSection,texSpecialChar,texStatement,texString,texTypeSize,texTypeStyle,texZone,texInputFile,texOption,texStyleStatement,@Spell,texStyleMatcher + syn cluster texRefGroup contains=texMatcher,texComment,texDelimiter + if !exists("tex_no_math") + syn cluster texMathZones contains=texMathZoneV,texMathZoneW,texMathZoneX,texMathZoneY,texMathZoneZ +@@ -179,24 +180,24 @@ + + " \begin{}/\end{} section markers: {{{1 + syn match texSectionMarker "\\begin\>\|\\end\>" nextgroup=texSectionName +-syn region texSectionName matchgroup=Delimiter start="{" end="}" contained nextgroup=texSectionModifier +-syn region texSectionModifier matchgroup=Delimiter start="\[" end="]" contained ++syn region texSectionName matchgroup=Delimiter start="{" end="}" contained nextgroup=texSectionModifier contains=texComment ++syn region texSectionModifier matchgroup=Delimiter start="\[" end="]" contained contains=texComment + + " \documentclass, \documentstyle, \usepackage: {{{1 + syn match texDocType "\\documentclass\>\|\\documentstyle\>\|\\usepackage\>" nextgroup=texSectionName,texDocTypeArgs +-syn region texDocTypeArgs matchgroup=Delimiter start="\[" end="]" contained nextgroup=texSectionName ++syn region texDocTypeArgs matchgroup=Delimiter start="\[" end="]" contained nextgroup=texSectionName contains=texComment + + " Preamble syntax-based folding support: {{{1 + if g:tex_fold_enabled && has("folding") +- syn region texPreamble transparent fold start='\zs\\documentclass\>' end='\ze\\begin{document}' contains=@texMatchGroup ++ syn region texPreamble transparent fold start='\zs\\documentclass\>' end='\ze\\begin{document}' contains=texStyle,@texMatchGroup + endif + + " TeX input: {{{1 + syn match texInput "\\input\s\+[a-zA-Z/.0-9_^]\+"hs=s+7 contains=texStatement +-syn match texInputFile "\\include\(graphics\|list\)\=\(\[.\{-}\]\)\=\s*{.\{-}}" contains=texStatement,texInputCurlies ++syn match texInputFile "\\include\(graphics\|list\)\=\(\[.\{-}\]\)\=\s*{.\{-}}" contains=texStatement,texInputCurlies,texInputFileOpt + syn match texInputFile "\\\(epsfig\|input\|usepackage\)\s*\(\[.*\]\)\={.\{-}}" contains=texStatement,texInputCurlies,texInputFileOpt + syn match texInputCurlies "[{}]" contained +-syn region texInputFileOpt matchgroup=Delimiter start="\[" end="\]" contained ++syn region texInputFileOpt matchgroup=Delimiter start="\[" end="\]" contained contains=texComment + + " Type Styles (LaTeX 2.09): {{{1 + syn match texTypeStyle "\\rm\>" +@@ -309,7 +310,7 @@ + exe 'syn region '.grpname.' start='."'".'\\begin\s*{\s*'.a:mathzone.'\s*}'."'".' end='."'".'\\end\s*{\s*'.a:mathzone.'\s*}'."'".' keepend contains=@texMathZoneGroup'.foldcmd + exe 'syn sync match '.syncname.' grouphere '.grpname.' "\\begin\s*{\s*'.a:mathzone.'\*\s*}"' + exe 'syn sync match '.syncname.' grouphere '.grpname.' "\\begin\s*{\s*'.a:mathzone.'\*\s*}"' +- exe 'HiLink '.grpname.' texMath' ++ exe 'hi def link '.grpname.' texMath' + if a:starform + let grpname = "texMathZone".a:sfx.'S' + let syncname = "texSyncMathZone".a:sfx.'S' +@@ -317,7 +318,7 @@ + exe 'syn region '.grpname.' start='."'".'\\begin\s*{\s*'.a:mathzone.'\*\s*}'."'".' end='."'".'\\end\s*{\s*'.a:mathzone.'\*\s*}'."'".' keepend contains=@texMathZoneGroup'.foldcmd + exe 'syn sync match '.syncname.' grouphere '.grpname.' "\\begin\s*{\s*'.a:mathzone.'\*\s*}"' + exe 'syn sync match '.syncname.' grouphere '.grpname.' "\\begin\s*{\s*'.a:mathzone.'\*\s*}"' +- exe 'HiLink '.grpname.' texMath' ++ exe 'hi def link '.grpname.' texMath' + endif + endfun + +@@ -399,7 +400,7 @@ + " Separate lines used for verb` and verb# so that the end conditions {{{1 + " will appropriately terminate. Ideally vim would let me save a + " character from the start pattern and re-use it in the end-pattern. +-syn region texZone start="\\begin{verbatim}" end="\\end{verbatim}\|%stopzone\>" contains=@Spell ++syn region texZone start="\\begin{[vV]erbatim}" end="\\end{[vV]erbatim}\|%stopzone\>" contains=@Spell + " listings package: + syn region texZone start="\\begin{lstlisting}" end="\\end{lstlisting}\|%stopzone\>" contains=@Spell + " moreverb package: +@@ -456,6 +457,14 @@ + " TeX String Delimiters: {{{1 + syn match texString "\(``\|''\|,,\)" + ++" makeatletter -- makeatother sections ++if !exists("g:tex_no_error") ++ syn region texStyle matchgroup=texStatement start='\\makeatletter' end='\\makeatother' contains=@texStyleGroup contained ++ syn match texStyleStatement "\\[a-zA-Z@]\+" contained ++ syn region texStyleMatcher matchgroup=Delimiter start="{" skip="\\\\\|\\[{}]" end="}" contains=@texStyleGroup,texError contained ++ syn region texStyleMatcher matchgroup=Delimiter start="\[" end="]" contains=@texStyleGroup,texError contained ++endif ++ + " LaTeX synchronization: {{{1 + syn sync maxlines=200 + syn sync minlines=50 +@@ -507,6 +516,7 @@ + HiLink texMathDelimSet2 texMathDelim + HiLink texMathDelimKey texMathDelim + HiLink texMathMatcher texMath ++ HiLink texMathZoneV texMath + HiLink texMathZoneW texMath + HiLink texMathZoneX texMath + HiLink texMathZoneY texMath +@@ -516,6 +526,7 @@ + HiLink texSectionMarker texCmdName + HiLink texSectionName texSection + HiLink texSpaceCode texStatement ++ HiLink texStyleStatement texStatement + HiLink texTypeSize texType + HiLink texTypeStyle texType + +diff -u -r --new-file runtime/syntax.orig/uil.vim runtime/syntax/uil.vim +--- runtime/syntax.orig/uil.vim 2004-06-07 09:32:35.000000000 -0500 ++++ runtime/syntax/uil.vim 2009-12-16 14:38:21.000000000 -0600 +@@ -1,8 +1,9 @@ + " Vim syntax file + " Language: Motif UIL (User Interface Language) + " Maintainer: Thomas Koehler <jean-luc@picard.franken.de> +-" Last Change: 2002 Sep 20 +-" URL: http://jeanluc-picard.de/vim/syntax/uil.vim ++" Last Change: 2009 Dec 04 ++" URL: http://gott-gehabt.de/800_wer_wir_sind/thomas/Homepage/Computer/vim/syntax/uil.vim ++ + + " Quit when a syntax file was already loaded + if version < 600 +diff -u -r --new-file runtime/syntax.orig/updatedb.vim runtime/syntax/updatedb.vim +--- runtime/syntax.orig/updatedb.vim 2007-10-25 09:36:25.000000000 -0500 ++++ runtime/syntax/updatedb.vim 2009-06-13 07:38:40.000000000 -0500 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: updatedb.conf(5) configuration file + " Maintainer: Nikolai Weibull <now@bitwi.se> +-" Latest Revision: 2007-10-25 ++" Latest Revision: 2009-05-25 + + if exists("b:current_syntax") + finish +@@ -18,7 +18,11 @@ + syn match updatedbBegin display '^' + \ nextgroup=updatedbName,updatedbComment skipwhite + +-syn keyword updatedbName contained PRUNEFS PRUNEPATHS PRUNE_BIND_MOUNTS ++syn keyword updatedbName contained ++ \ PRUNEFS ++ \ PRUNENAMES ++ \ PRUNEPATHS ++ \ PRUNE_BIND_MOUNTS + \ nextgroup=updatedbNameEq + + syn match updatedbNameEq contained display '=' nextgroup=updatedbValue +diff -u -r --new-file runtime/syntax.orig/vim.vim runtime/syntax/vim.vim +--- runtime/syntax.orig/vim.vim 2008-07-29 14:43:38.000000000 -0500 ++++ runtime/syntax/vim.vim 2010-01-12 14:33:53.000000000 -0600 +@@ -1,8 +1,8 @@ + " Vim syntax file + " Language: Vim 7.2 script + " Maintainer: Dr. Charles E. Campbell, Jr. <NdrOchipS@PcampbellAfamily.Mbiz> +-" Last Change: July 29, 2008 +-" Version: 7.2-82 ++" Last Change: Nov 18, 2009 ++" Version: 7.2-95 + " Automatically generated keyword lists: {{{1 + + " Quit when a syntax file was already loaded {{{2 +@@ -16,11 +16,11 @@ + syn cluster vimCommentGroup contains=vimTodo,@Spell + + " regular vim commands {{{2 +-syn keyword vimCommand contained abc[lear] argdo argu[ment] bel[owright] bN[ext] breakd[el] b[uffer] caddb[uffer] cb[uffer] cex[pr] cg[etfile] checkt[ime] cnew[er] col[der] con[tinue] cq[uit] delc[ommand] diffoff diffu[pdate] dr[op] echom[sg] em[enu] endt[ry] exu[sage] fin[d] foldc[lose] fu[nction] ha[rdcopy] helpt[ags] if is[earch] ju[mps] kee[pmarks] lan[guage] lc[d] lefta[bove] lgetb[uffer] lgrepa[dd] lla[st] lmapc[lear] lnf[ile] loc[kmarks] lpf[ile] lt[ag] mak[e] menut[ranslate] mkvie[w] mzf[ile] n[ext] nu[mber] opt[ions] perld[o] pp[op] P[rint] promptr[epl] ptj[ump] ptp[revious] pw[d] q[uit] redi[r] reg[isters] rew[ind] rubyd[o] sal[l] sba[ll] sbn[ext] sb[uffer] setf[iletype] sfir[st] sim[alt] sm[ap] sn[ext] snor[emap] so[urce] spellr[epall] spr[evious] star[tinsert] stopi[nsert] sunmenu t tabe[dit] tabm[ove] tabo[nly] ta[g] tclf[ile] tj[ump] tn[ext] tr[ewind] tu[nmenu] undol[ist] verb[ose] vim[grep] vmapc[lear] wh[ile] win[size] wq wv[iminfo] xm[ap] XMLent xnoremenu +-syn keyword vimCommand contained abo[veleft] arge[dit] as[cii] bf[irst] bo[tright] breakl[ist] buffers cad[dexpr] cc cf[ile] c[hange] cla[st] cn[ext] colo[rscheme] cope[n] cr[ewind] d[elete] diffpatch dig[raphs] ds[earch] echon emenu* endw[hile] f[ile] fini[sh] folddoc[losed] go[to] h[elp] hid[e] ij[ump] isp[lit] k laddb[uffer] la[st] lch[dir] lex[pr] lgete[xpr] lh[elpgrep] lli[st] lnew[er] lNf[ile] lockv[ar] lp[revious] lv[imgrep] ma[rk] mk[exrc] mkv[imrc] mz[scheme] N[ext] omapc[lear] pc[lose] po[p] pre[serve] profd[el] ps[earch] ptl[ast] ptr[ewind] pyf[ile] quita[ll] red[o] res[ize] ri[ght] rubyf[ile] san[dbox] sbf[irst] sbN[ext] scripte[ncoding] setg[lobal] sh[ell] sla[st] smapc[lear] sN[ext] snoreme spelld[ump] spellu[ndo] sre[wind] startr[eplace] sts[elect] sus[pend] tab tabf[ind] tabnew tabp[revious] tags te[aroff] tl[ast] tN[ext] try una[bbreviate] unh[ide] ve[rsion] vimgrepa[dd] vne[w] winc[md] wn[ext] wqa[ll] X xmapc[lear] XMLns xunme +-syn keyword vimCommand contained al[l] argg[lobal] bad[d] bl[ast] bp[revious] br[ewind] bun[load] caddf[ile] ccl[ose] cfir[st] changes cl[ist] cN[ext] comc[lear] co[py] cuna[bbrev] delf[unction] diffpu[t] di[splay] dsp[lit] e[dit] endfo[r] ene[w] files fir[st] foldd[oopen] gr[ep] helpf[ind] his[tory] il[ist] iuna[bbrev] keepalt lad[dexpr] later lcl[ose] lf[ile] lg[etfile] l[ist] lmak[e] lne[xt] ln[oremap] lol[der] lr[ewind] lvimgrepa[dd] marks mks[ession] mod[e] nbkey nmapc[lear] on[ly] ped[it] popu prev[ious] prof[ile] pta[g] ptn[ext] pts[elect] py[thon] r[ead] redr[aw] ret[ab] rightb[elow] ru[ntime] sa[rgument] sbl[ast] sbp[revious] scrip[tnames] setl[ocal] sign sl[eep] sme sni[ff] snoremenu spe[llgood] spellw[rong] sta[g] stj[ump] sun[hide] sv[iew] tabc[lose] tabfir[st] tabn[ext] tabr[ewind] tc[l] tf[irst] tm to[pleft] ts[elect] u[ndo] unlo[ckvar] vert[ical] vi[sual] vs[plit] windo wN[ext] w[rite] xa[ll] xme xn[oremap] xunmenu +-syn keyword vimCommand contained arga[dd] argl[ocal] ba[ll] bm[odified] brea[k] bro[wse] bw[ipeout] cal[l] cd cgetb[uffer] chd[ir] clo[se] cnf[ile] comp[iler] cpf[ile] cw[indow] delm[arks] diffsplit dj[ump] earlier el[se] endf[unction] ex filetype fix[del] foldo[pen] grepa[dd] helpg[rep] iabc[lear] imapc[lear] j[oin] keepj[umps] laddf[ile] lb[uffer] le[ft] lfir[st] lgr[ep] ll lm[ap] lN[ext] lo[adview] lop[en] ls lw[indow] mat[ch] mksp[ell] m[ove] new noh[lsearch] o[pen] pe[rl] popu[p] p[rint] promptf[ind] ptf[irst] ptN[ext] pu[t] qa[ll] rec[over] redraws[tatus] retu[rn] rub[y] rv[iminfo] sav[eas] sbm[odified] sbr[ewind] se[t] sf[ind] sil[ent] sm[agic] smenu sno[magic] sor[t] spelli[nfo] sp[lit] startg[replace] st[op] sunme syncbind tabd[o] tabl[ast] tabN[ext] tabs tcld[o] th[row] tm[enu] tp[revious] tu undoj[oin] up[date] vie[w] viu[sage] wa[ll] winp[os] wp[revious] ws[verb] x[it] xmenu xnoreme y[ank] +-syn keyword vimCommand contained argd[elete] ar[gs] bd[elete] bn[ext] breaka[dd] bufdo cabc[lear] cat[ch] ce[nter] cgete[xpr] che[ckpath] cmapc[lear] cNf[ile] conf[irm] cp[revious] debugg[reedy] diffg[et] diffthis dl[ist] echoe[rr] elsei[f] en[dif] exi[t] fina[lly] fo[ld] for ++syn keyword vimCommand contained abc[lear] argdo argu[ment] bel[owright] bN[ext] breakd[el] b[uffer] caddb[uffer] cb[uffer] cex[pr] cg[etfile] checkt[ime] cnew[er] col[der] con[tinue] cq[uit] delc[ommand] diffoff diffu[pdate] dr[op] echom[sg] em[enu] en[dif] ex files fini[sh] foldc[lose] for grepa[dd] helpg[rep] iabc[lear] imapc[lear] j[oin] keepj[umps] laddf[ile] lb[uffer] le[ft] lfir[st] lgr[ep] ll lmapc[lear] lnf[ile] lockv[ar] lp[revious] lv[imgrep] ma[rk] mk[exrc] mkv[imrc] mz[scheme] N[ext] ol[dfiles] opt[ions] perld[o] pp[op] P[rint] promptr[epl] ptj[ump] ptp[revious] pw[d] q[uit] redi[r] reg[isters] rew[ind] rubyd[o] sal[l] sba[ll] sbn[ext] sb[uffer] setf[iletype] sfir[st] sim[alt] sm[ap] sN[ext] snoremenu spe[llgood] spellw[rong] sta[g] stj[ump] sun[hide] sv[iew] tabc[lose] tabfir[st] tabn[ext] tabr[ewind] tc[l] tf[irst] tm to[pleft] ts[elect] u[ndo] unlo[ckvar] vert[ical] vi[sual] vs[plit] windo wN[ext] w[rite] xa[ll] xmenu xnoremenu ++syn keyword vimCommand contained abo[veleft] arge[dit] as[cii] bf[irst] bo[tright] breakl[ist] buffers cad[dexpr] cc cf[ile] c[hange] cla[st] cn[ext] colo[rscheme] cope[n] cr[ewind] d[elete] diffpatch dig[raphs] ds[earch] echon emenu* endt[ry] exi[t] filetype fir[st] folddoc[losed] fu[nction] ha[rdcopy] helpt[ags] if is[earch] ju[mps] kee[pmarks] lan[guage] lc[d] lefta[bove] lgetb[uffer] lgrepa[dd] lla[st] lnew[er] lNf[ile] lol[der] lr[ewind] lvimgrepa[dd] marks mks[ession] mod[e] nbkey nmapc[lear] omapc[lear] pc[lose] po[p] pre[serve] profd[el] ps[earch] ptl[ast] ptr[ewind] pyf[ile] quita[ll] red[o] res[ize] ri[ght] rubyf[ile] san[dbox] sbf[irst] sbN[ext] scripte[ncoding] setg[lobal] sh[ell] sla[st] sme sni[ff] sor[t] spelli[nfo] sp[lit] startg[replace] st[op] sunme syncbind tabd[o] tabl[ast] tabN[ext] tabs tcld[o] th[row] tm[enu] tp[revious] tu undoj[oin] up[date] vie[w] viu[sage] wa[ll] winp[os] wp[revious] ws[verb] x[it] XMLent xunme ++syn keyword vimCommand contained al[l] argg[lobal] bad[d] bl[ast] bp[revious] br[ewind] bun[load] caddf[ile] ccl[ose] cfir[st] changes cl[ist] cN[ext] comc[lear] co[py] cuna[bbrev] delf[unction] diffpu[t] di[splay] dsp[lit] e[dit] endfo[r] endw[hile] exu[sage] fina[lly] fix[del] foldd[oopen] go[to] h[elp] hid[e] ij[ump] isp[lit] k laddb[uffer] la[st] lch[dir] lex[pr] lgete[xpr] lh[elpgrep] lli[st] lne[xt] lo[adview] lop[en] ls lw[indow] mat[ch] mksp[ell] m[ove] new noh[lsearch] on[ly] ped[it] popu prev[ious] prof[ile] pta[g] ptn[ext] pts[elect] py[thon] r[ead] redr[aw] ret[ab] rightb[elow] ru[ntime] sa[rgument] sbl[ast] sbp[revious] scrip[tnames] setl[ocal] sign sl[eep] smenu sno[magic] so[urce] spellr[epall] spr[evious] star[tinsert] stopi[nsert] sunmenu t tabe[dit] tabm[ove] tabo[nly] ta[g] tclf[ile] tj[ump] tn[ext] tr[ewind] tu[nmenu] undol[ist] verb[ose] vim[grep] vmapc[lear] wh[ile] win[size] wq wv[iminfo] xmapc[lear] XMLns xunmenu ++syn keyword vimCommand contained arga[dd] argl[ocal] ba[ll] bm[odified] brea[k] bro[wse] bw[ipeout] cal[l] cd cgetb[uffer] chd[ir] clo[se] cnf[ile] comp[iler] cpf[ile] cw[indow] delm[arks] diffsplit dj[ump] earlier el[se] endf[unction] ene[w] f[ile] fin[d] fo[ld] foldo[pen] gr[ep] helpf[ind] his[tory] il[ist] iuna[bbrev] keepalt lad[dexpr] later lcl[ose] lf[ile] lg[etfile] l[ist] lmak[e] lN[ext] loc[kmarks] lpf[ile] lt[ag] mak[e] menut[ranslate] mkvie[w] mzf[ile] n[ext] nu[mber] o[pen] pe[rl] popu[p] p[rint] promptf[ind] ptf[irst] ptN[ext] pu[t] qa[ll] rec[over] redraws[tatus] retu[rn] rub[y] rv[iminfo] sav[eas] sbm[odified] sbr[ewind] se[t] sf[ind] sil[ent] sm[agic] sn[ext] snoreme spelld[ump] spellu[ndo] sre[wind] startr[eplace] sts[elect] sus[pend] tab tabf[ind] tabnew tabp[revious] tags te[aroff] tl[ast] tN[ext] try una[bbreviate] unh[ide] ve[rsion] vimgrepa[dd] vne[w] winc[md] wn[ext] wqa[ll] X xme xnoreme y[ank] ++syn keyword vimCommand contained argd[elete] ar[gs] bd[elete] bn[ext] breaka[dd] bufdo cabc[lear] cat[ch] ce[nter] cgete[xpr] che[ckpath] cmapc[lear] cNf[ile] conf[irm] cp[revious] debugg[reedy] diffg[et] diffthis dl[ist] echoe[rr] elsei[f] + syn match vimCommand contained "\<z[-+^.=]" + + " vimOptions are caught only when contained in a vimSet {{{2 +@@ -33,7 +33,7 @@ + syn keyword vimOption contained altkeymap arabic autowrite backupcopy bdir bin bomb bt cd ci cinw co completefunc cp cscopetag csto debug dict dir eb enc errorbells expandtab fdl fenc fileformat fml foldignore foldopen fs gfn grepprg guiheadroom helplang history hls imactivatekey iminsert inde insertmode iskeyword keymodel laststatus lisp lpl magic maxfuncdepth menuitems mm modifiable mousem mps number opendevice paste pex pmbcs printencoding prompt rdt ri + + " vimOptions: These are the turn-off setting variants {{{2 +-syn keyword vimOption contained noacd noallowrevins noantialias noarabic noarshape noautoread noaw noballooneval nobinary nobk nobuflisted nocin noconfirm nocopyindent nocscopeverbose nocuc nocursorline nodg nodisable noeb noedcompatible noendofline noequalalways noesckeys noex noexrc nofk nofoldenable nogdefault nohid nohk nohkmapp nohls noic noignorecase noimc noimd noinf noinsertmode nojoinspaces nolazyredraw nolinebreak nolist nolpl noma nomagic noml nomodeline nomodified nomousef nomousehide nonumber noopendevice nopi nopreviewwindow nopvw noremap norevins norightleft norl noro noru nosb noscb noscs nosft noshelltemp noshortname noshowfulltag noshowmode nosm nosmartindent nosmd nosol nosplitbelow nospr nossl nostartofline noswapfile nota notagrelative notbi notbs noterse notextmode notgst notimeout noto notr nottybuiltin notx novisualbell nowarn noweirdinvert nowfw nowinfixheight nowiv nowrap nowrite nowritebackup ++syn keyword vimOption contained noacd noallowrevins noantialias noarabic noarshape noautoread noaw noballooneval nobinary nobk nobuflisted nocin noconfirm nocopyindent nocscopeverbose nocuc nocursorline nodg noimdisable noeb noedcompatible noendofline noequalalways noesckeys noex noexrc nofk nofoldenable nogdefault nohid nohk nohkmapp nohls noic noignorecase noimc noimd noinf noinsertmode nojoinspaces nolazyredraw nolinebreak nolist nolpl noma nomagic noml nomodeline nomodified nomousef nomousehide nonumber noopendevice nopi nopreviewwindow nopvw noremap norevins norightleft norl noro noru nosb noscb noscs nosft noshelltemp noshortname noshowfulltag noshowmode nosm nosmartindent nosmd nosol nosplitbelow nospr nossl nostartofline noswapfile nota notagrelative notbi notbs noterse notextmode notgst notimeout noto notr nottybuiltin notx novisualbell nowarn noweirdinvert nowfw nowinfixheight nowiv nowrap nowrite nowritebackup + syn keyword vimOption contained noai noaltkeymap noar noarabicshape noautochdir noautowrite noawa nobeval nobiosk nobl nocf nocindent noconsk nocp nocst nocul nodeco nodiff noea noed noek noeol noerrorbells noet noexpandtab nofen nofkmap nogd noguipty nohidden nohkmap nohkp nohlsearch noicon noim noimcmdline noincsearch noinfercase nois nojs nolbr nolisp noloadplugins nolz nomacatsui nomh nomod nomodifiable nomore nomousefocus nonu noodev nopaste nopreserveindent noprompt noreadonly norestorescreen nori norightleftcmd norlc nors noruler nosc noscrollbind nosecure noshellslash noshiftround noshowcmd noshowmatch nosi nosmartcase nosmarttab nosn nospell nosplitright nosr nosta nostmp noswf notagbsearch notagstack notbidi notermbidi notextauto notf notildeop notitle notop nottimeout nottyfast novb nowa nowb nowfh nowildmenu nowinfixwidth nowmnu nowrapscan nowriteany nows + syn keyword vimOption contained noakm noanti noarab noari noautoindent noautowriteall nobackup nobin nobioskey nobomb noci nocompatible noconskey nocscopetag nocsverb nocursorcolumn nodelcombine nodigraph + +@@ -62,7 +62,7 @@ + syn keyword vimAutoEvent contained BufAdd BufCreate BufDelete BufEnter BufFilePost BufFilePre BufHidden BufLeave BufNew BufNewFile BufRead BufReadCmd BufReadPost BufReadPre BufUnload BufWinEnter BufWinLeave BufWipeout BufWrite BufWriteCmd BufWritePost BufWritePre Cmd-event CmdwinEnter CmdwinLeave ColorScheme CursorHold CursorHoldI CursorMoved CursorMovedI EncodingChanged FileAppendCmd FileAppendPost FileAppendPre FileChangedRO FileChangedShell FileChangedShellPost FileEncoding FileReadCmd FileReadPost FileReadPre FileType FileWriteCmd FileWritePost FileWritePre FilterReadPost FilterReadPre FilterWritePost FilterWritePre FocusGained FocusLost FuncUndefined GUIEnter GUIFailed InsertChange InsertEnter InsertLeave MenuPopup QuickFixCmdPost QuickFixCmdPre RemoteReply SessionLoadPost ShellCmdPost ShellFilterPost SourceCmd SourcePre SpellFileMissing StdinReadPost StdinReadPre SwapExists Syntax TabEnter TabLeave TermChanged TermResponse User UserGettingBored VimEnter VimLeave VimLeavePre VimResized WinEnter WinLeave + + " Highlight commonly used Groupnames {{{2 +-syn keyword vimGroup contained Comment Constant String Character Number Boolean Float Identifier Function Statement Conditional Repeat Label Operator Keyword Exception PreProc Include Define Macro PreCondit Type StorageClass Structure Typedef Special SpecialChar Tag Delimiter SpecialComment Debug Underlined Ignore Error Todo ++syn keyword vimGroup contained Comment Constant String Character Number Boolean Float Identifier Function Statement Conditional Repeat Label Operator Keyword Exception PreProc Include Define Macro PreCondit Type StorageClass Structure Typedef Special SpecialChar Tag Delimiter SpecialComment Debug Underlined Ignore Error Todo None + + " Default highlighting groups {{{2 + syn keyword vimHLGroup contained Cursor CursorColumn CursorIM CursorLine DiffAdd DiffChange DiffDelete DiffText Directory ErrorMsg FoldColumn Folded IncSearch LineNr MatchParen Menu ModeMsg MoreMsg NonText Normal Pmenu PmenuSbar PmenuSel PmenuThumb Question Scrollbar Search SignColumn SpecialKey SpellBad SpellCap SpellLocal SpellRare StatusLine StatusLineNC TabLine TabLineFill TabLineSel Title Tooltip VertSplit Visual VisualNOS WarningMsg WildMenu +@@ -99,8 +99,9 @@ + syn match vimCmdSep "[:|]\+" skipwhite nextgroup=vimAddress,vimAutoCmd,vimCommand,vimExtCmd,vimFilter,vimLet,vimMap,vimMark,vimSet,vimSyntax,vimUserCmd + syn match vimIsCommand "\<\h\w*\>" contains=vimCommand + syn match vimVar "\<[bwglsav]:\K\k*\>" +-syn match vimVar contained "\<\K\k*\>" +-syn keyword vimCommand contained in ++syn match vimVar contained "\<\K\k*\>" ++syn match vimFBVar contained "\<[bwglsav]:\K\k*\>" ++syn keyword vimCommand contained in + + " Insertions And Appends: insert append {{{2 + " ======================= +@@ -127,7 +128,7 @@ + + " Augroup : vimAugroupError removed because long augroups caused sync'ing problems. {{{2 + " ======= : Trade-off: Increasing synclines with slower editing vs augroup END error checking. +-syn cluster vimAugroupList contains=vimIsCommand,vimFunction,vimFunctionError,vimLineComment,vimSpecFile,vimOper,vimNumber,vimComment,vimString,vimSubst,vimMark,vimRegister,vimAddress,vimFilter,vimCmplxRepeat,vimComment,vimLet,vimSet,vimAutoCmd,vimRegion,vimSynLine,vimNotation,vimCtrlChar,vimFuncVar,vimContinue ++syn cluster vimAugroupList contains=vimIsCommand,vimFuncName,vimFunction,vimFunctionError,vimLineComment,vimSpecFile,vimOper,vimNumber,vimOperParen,vimComment,vimString,vimSubst,vimMark,vimRegister,vimAddress,vimFilter,vimCmplxRepeat,vimComment,vimLet,vimSet,vimAutoCmd,vimRegion,vimSynLine,vimNotation,vimCtrlChar,vimFuncVar,vimContinue + if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'a' + syn region vimAugroup fold start="\<aug\%[roup]\>\s\+\K\k*" end="\<aug\%[roup]\>\s\+[eE][nN][dD]\>" contains=vimAugroupKey,vimAutoCmd,@vimAugroupList keepend + else +@@ -141,156 +142,154 @@ + + " Operators: {{{2 + " ========= +-syn cluster vimOperGroup contains=vimOper,vimOperParen,vimNumber,vimString,vimRegister,vimContinue +-syn match vimOper "\(==\|!=\|>=\|<=\|=\~\|!\~\|>\|<\|=\)[?#]\{0,2}" skipwhite nextgroup=vimString,vimSpecFile +-syn match vimOper "||\|&&\|[-+.]" skipwhite nextgroup=vimString,vimSpecFile +-syn region vimOperParen oneline matchgroup=vimOper start="(" end=")" contains=@vimOperGroup +-syn region vimOperParen oneline matchgroup=vimSep start="{" end="}" contains=@vimOperGroup nextgroup=vimVar ++syn cluster vimOperGroup contains=vimFunc,vimFuncVar,vimOper,vimOperParen,vimNumber,vimString,vimRegister,vimContinue ++syn match vimOper "\(==\|!=\|>=\|<=\|=\~\|!\~\|>\|<\|=\)[?#]\{0,2}" skipwhite nextgroup=vimString,vimSpecFile ++syn match vimOper "||\|&&\|[-+.]" skipwhite nextgroup=vimString,vimSpecFile ++syn region vimOperParen oneline matchgroup=vimParenSep start="(" end=")" contains=@vimOperGroup ++syn region vimOperParen oneline matchgroup=vimSep start="{" end="}" contains=@vimOperGroup nextgroup=vimVar,vimFuncVar + if !exists("g:vimsyn_noerror") +- syn match vimOperError ")" ++ syn match vimOperError ")" + endif + + " Functions : Tag is provided for those who wish to highlight tagged functions {{{2 + " ========= +-syn cluster vimFuncList contains=vimCommand,vimFuncKey,Tag,vimFuncSID +-syn cluster vimFuncBodyList contains=vimAddress,vimAutoCmd,vimCmplxRepeat,vimComment,vimComment,vimContinue,vimCtrlChar,vimEcho,vimEchoHL,vimExecute,vimIf,vimFunc,vimFunction,vimFunctionError,vimFuncVar,vimIsCommand,vimLet,vimLineComment,vimMap,vimMark,vimNorm,vimNotation,vimNotFunc,vimNumber,vimOper,vimOperParen,vimRegion,vimRegister,vimSet,vimSpecFile,vimString,vimSubst,vimSynLine,vimUserCommand +-if !exists("g:vimsyn_noerror") +- syn match vimFunctionError "\<fu\%[nction]!\=\s\+\zs\U\i\{-}\ze\s*(" contains=vimFuncKey,vimFuncBlank nextgroup=vimFuncBody +-endif +-syn match vimFunction "\<fu\%[nction]!\=\s\+\(\(<[sS][iI][dD]>\|[Ss]:\|\u\|\i\+#\)\i*\|\(g:\)\=\(\I\i*\.\)\+\I\i*\)\ze\s*(" contains=@vimFuncList nextgroup=vimFuncBody ++syn cluster vimFuncList contains=vimCommand,vimFunctionError,vimFuncKey,Tag,vimFuncSID ++syn cluster vimFuncBodyList contains=vimAbb,vimAddress,vimAugroupKey,vimAutoCmd,vimCmplxRepeat,vimComment,vimComment,vimContinue,vimCtrlChar,vimEcho,vimEchoHL,vimExecute,vimIf,vimIsCommand,vimFBVar,vimFunc,vimFunction,vimFuncVar,vimHighlight,vimIsCommand,vimLet,vimLineComment,vimMap,vimMark,vimNorm,vimNotation,vimNotFunc,vimNumber,vimOper,vimOperParen,vimRegion,vimRegister,vimSet,vimSpecFile,vimString,vimSubst,vimSynLine,vimUserCommand ++syn match vimFunction "\<fu\%[nction]!\=\s\+\%(<[sS][iI][dD]>\|[sSgGbBwWtTlL]:\)\=\%(\i\|[#.]\|{.\{-1,}}\)*\ze\s*(" contains=@vimFuncList nextgroup=vimFuncBody ++ + if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'f' +- syn region vimFuncBody contained fold start="\ze(" matchgroup=vimCommand end="\<\(endf\>\|endfu\%[nction]\>\)" contains=@vimFuncBodyList ++ syn region vimFuncBody contained fold start="\ze(" matchgroup=vimCommand end="\<\(endf\>\|endfu\%[nction]\>\)" contains=@vimFuncBodyList + else +- syn region vimFuncBody contained start="\ze(" matchgroup=vimCommand end="\<\(endf\>\|endfu\%[nction]\>\)" contains=@vimFuncBodyList ++ syn region vimFuncBody contained start="\ze(" matchgroup=vimCommand end="\<\(endf\>\|endfu\%[nction]\>\)" contains=@vimFuncBodyList + endif +-syn match vimFuncVar contained "a:\(\I\i*\|\d\+\)" +-syn match vimFuncSID contained "\c<sid>\|\<s:" +-syn keyword vimFuncKey contained fu[nction] +-syn match vimFuncBlank contained "\s\+" ++syn match vimFuncVar contained "a:\(\K\k*\|\d\+\)" ++syn match vimFuncSID contained "\c<sid>\|\<s:" ++syn keyword vimFuncKey contained fu[nction] ++syn match vimFuncBlank contained "\s\+" + +-syn keyword vimPattern contained start skip end ++syn keyword vimPattern contained start skip end + + " Special Filenames, Modifiers, Extension Removal: {{{2 + " =============================================== +-syn match vimSpecFile "<c\(word\|WORD\)>" nextgroup=vimSpecFileMod,vimSubst +-syn match vimSpecFile "<\([acs]file\|amatch\|abuf\)>" nextgroup=vimSpecFileMod,vimSubst +-syn match vimSpecFile "\s%[ \t:]"ms=s+1,me=e-1 nextgroup=vimSpecFileMod,vimSubst +-syn match vimSpecFile "\s%$"ms=s+1 nextgroup=vimSpecFileMod,vimSubst +-syn match vimSpecFile "\s%<"ms=s+1,me=e-1 nextgroup=vimSpecFileMod,vimSubst +-syn match vimSpecFile "#\d\+\|[#%]<\>" nextgroup=vimSpecFileMod,vimSubst +-syn match vimSpecFileMod "\(:[phtre]\)\+" contained ++syn match vimSpecFile "<c\(word\|WORD\)>" nextgroup=vimSpecFileMod,vimSubst ++syn match vimSpecFile "<\([acs]file\|amatch\|abuf\)>" nextgroup=vimSpecFileMod,vimSubst ++syn match vimSpecFile "\s%[ \t:]"ms=s+1,me=e-1 nextgroup=vimSpecFileMod,vimSubst ++syn match vimSpecFile "\s%$"ms=s+1 nextgroup=vimSpecFileMod,vimSubst ++syn match vimSpecFile "\s%<"ms=s+1,me=e-1 nextgroup=vimSpecFileMod,vimSubst ++syn match vimSpecFile "#\d\+\|[#%]<\>" nextgroup=vimSpecFileMod,vimSubst ++syn match vimSpecFileMod "\(:[phtre]\)\+" contained + + " User-Specified Commands: {{{2 + " ======================= +-syn cluster vimUserCmdList contains=vimAddress,vimSyntax,vimHighlight,vimAutoCmd,vimCmplxRepeat,vimComment,vimCtrlChar,vimEscapeBrace,vimFilter,vimFunc,vimFunction,vimIsCommand,vimMark,vimNotation,vimNumber,vimOper,vimRegion,vimRegister,vimLet,vimSet,vimSetEqual,vimSetString,vimSpecFile,vimString,vimSubst,vimSubstRep,vimSubstRange,vimSynLine +-syn keyword vimUserCommand contained com[mand] +-syn match vimUserCmd "\<com\%[mand]!\=\>.*$" contains=vimUserAttrb,vimUserCommand,@vimUserCmdList +-syn match vimUserAttrb contained "-n\%[args]=[01*?+]" contains=vimUserAttrbKey,vimOper +-syn match vimUserAttrb contained "-com\%[plete]=" contains=vimUserAttrbKey,vimOper nextgroup=vimUserAttrbCmplt,vimUserCmdError +-syn match vimUserAttrb contained "-ra\%[nge]\(=%\|=\d\+\)\=" contains=vimNumber,vimOper,vimUserAttrbKey +-syn match vimUserAttrb contained "-cou\%[nt]=\d\+" contains=vimNumber,vimOper,vimUserAttrbKey +-syn match vimUserAttrb contained "-bang\=\>" contains=vimOper,vimUserAttrbKey +-syn match vimUserAttrb contained "-bar\>" contains=vimOper,vimUserAttrbKey +-syn match vimUserAttrb contained "-re\%[gister]\>" contains=vimOper,vimUserAttrbKey ++syn cluster vimUserCmdList contains=vimAddress,vimSyntax,vimHighlight,vimAutoCmd,vimCmplxRepeat,vimComment,vimCtrlChar,vimEscapeBrace,vimFilter,vimFunc,vimFuncName,vimFunction,vimFunctionError,vimIsCommand,vimMark,vimNotation,vimNumber,vimOper,vimRegion,vimRegister,vimLet,vimSet,vimSetEqual,vimSetString,vimSpecFile,vimString,vimSubst,vimSubstRep,vimSubstRange,vimSynLine ++syn keyword vimUserCommand contained com[mand] ++syn match vimUserCmd "\<com\%[mand]!\=\>.*$" contains=vimUserAttrb,vimUserCommand,@vimUserCmdList ++syn match vimUserAttrb contained "-n\%[args]=[01*?+]" contains=vimUserAttrbKey,vimOper ++syn match vimUserAttrb contained "-com\%[plete]=" contains=vimUserAttrbKey,vimOper nextgroup=vimUserAttrbCmplt,vimUserCmdError ++syn match vimUserAttrb contained "-ra\%[nge]\(=%\|=\d\+\)\=" contains=vimNumber,vimOper,vimUserAttrbKey ++syn match vimUserAttrb contained "-cou\%[nt]=\d\+" contains=vimNumber,vimOper,vimUserAttrbKey ++syn match vimUserAttrb contained "-bang\=\>" contains=vimOper,vimUserAttrbKey ++syn match vimUserAttrb contained "-bar\>" contains=vimOper,vimUserAttrbKey ++syn match vimUserAttrb contained "-re\%[gister]\>" contains=vimOper,vimUserAttrbKey + if !exists("g:vimsyn_noerror") +- syn match vimUserCmdError contained "\S\+\>" ++ syn match vimUserCmdError contained "\S\+\>" + endif + syn case ignore +-syn keyword vimUserAttrbKey contained bar ban[g] cou[nt] ra[nge] com[plete] n[args] re[gister] +-syn keyword vimUserAttrbCmplt contained augroup buffer command dir environment event expression file function help highlight mapping menu option something tag tag_listfiles var +-syn keyword vimUserAttrbCmplt contained custom customlist nextgroup=vimUserAttrbCmpltFunc,vimUserCmdError +-syn match vimUserAttrbCmpltFunc contained ",\%([sS]:\|<[sS][iI][dD]>\)\=\%(\h\w*\%(#\u\w*\)\+\|\u\w*\)"hs=s+1 nextgroup=vimUserCmdError ++syn keyword vimUserAttrbKey contained bar ban[g] cou[nt] ra[nge] com[plete] n[args] re[gister] ++syn keyword vimUserAttrbCmplt contained augroup buffer command dir environment event expression file function help highlight mapping menu option shellcmd something tag tag_listfiles var ++syn keyword vimUserAttrbCmplt contained custom customlist nextgroup=vimUserAttrbCmpltFunc,vimUserCmdError ++syn match vimUserAttrbCmpltFunc contained ",\%([sS]:\|<[sS][iI][dD]>\)\=\%(\h\w*\%(#\u\w*\)\+\|\u\w*\)"hs=s+1 nextgroup=vimUserCmdError + + syn case match +-syn match vimUserAttrbCmplt contained "custom,\u\w*" ++syn match vimUserAttrbCmplt contained "custom,\u\w*" + + " Lower Priority Comments: after some vim commands... {{{2 + " ======================= +-syn match vimComment excludenl +\s"[^\-:.%#=*].*$+lc=1 contains=@vimCommentGroup,vimCommentString +-syn match vimComment +\<endif\s\+".*$+lc=5 contains=@vimCommentGroup,vimCommentString +-syn match vimComment +\<else\s\+".*$+lc=4 contains=@vimCommentGroup,vimCommentString +-syn region vimCommentString contained oneline start='\S\s\+"'ms=e end='"' ++syn match vimComment excludenl +\s"[^\-:.%#=*].*$+lc=1 contains=@vimCommentGroup,vimCommentString ++syn match vimComment +\<endif\s\+".*$+lc=5 contains=@vimCommentGroup,vimCommentString ++syn match vimComment +\<else\s\+".*$+lc=4 contains=@vimCommentGroup,vimCommentString ++syn region vimCommentString contained oneline start='\S\s\+"'ms=e end='"' + + " Environment Variables: {{{2 + " ===================== +-syn match vimEnvvar "\$\I\i*" +-syn match vimEnvvar "\${\I\i*}" ++syn match vimEnvvar "\$\I\i*" ++syn match vimEnvvar "\${\I\i*}" + + " In-String Specials: {{{2 + " Try to catch strings, if nothing else matches (therefore it must precede the others!) + " vimEscapeBrace handles ["] []"] (ie. "s don't terminate string inside []) +-syn region vimEscapeBrace oneline contained transparent start="[^\\]\(\\\\\)*\[\zs\^\=\]\=" skip="\\\\\|\\\]" end="]"me=e-1 +-syn match vimPatSepErr contained "\\)" +-syn match vimPatSep contained "\\|" +-syn region vimPatSepZone oneline contained matchgroup=vimPatSepZ start="\\%\=\ze(" skip="\\\\" end="\\)\|[^\]['"]" contains=@vimStringGroup +-syn region vimPatRegion contained transparent matchgroup=vimPatSepR start="\\[z%]\=(" end="\\)" contains=@vimSubstList oneline +-syn match vimNotPatSep contained "\\\\" +-syn cluster vimStringGroup contains=vimEscapeBrace,vimPatSep,vimNotPatSep,vimPatSepErr,vimPatSepZone,@Spell +-syn region vimString oneline keepend start=+[^:a-zA-Z>!\\@]"+lc=1 skip=+\\\\\|\\"+ end=+"+ contains=@vimStringGroup +-syn region vimString oneline keepend start=+[^:a-zA-Z>!\\@]'+lc=1 end=+'+ +-syn region vimString oneline start=+=!+lc=1 skip=+\\\\\|\\!+ end=+!+ contains=@vimStringGroup +-syn region vimString oneline start="=+"lc=1 skip="\\\\\|\\+" end="+" contains=@vimStringGroup +-syn region vimString oneline start="\s/\s*\A"lc=1 skip="\\\\\|\\+" end="/" contains=@vimStringGroup +-syn match vimString contained +"[^"]*\\$+ skipnl nextgroup=vimStringCont +-syn match vimStringCont contained +\(\\\\\|.\)\{-}[^\\]"+ ++syn region vimEscapeBrace oneline contained transparent start="[^\\]\(\\\\\)*\[\zs\^\=\]\=" skip="\\\\\|\\\]" end="]"me=e-1 ++syn match vimPatSepErr contained "\\)" ++syn match vimPatSep contained "\\|" ++syn region vimPatSepZone oneline contained matchgroup=vimPatSepZ start="\\%\=\ze(" skip="\\\\" end="\\)\|[^\]['"]" contains=@vimStringGroup ++syn region vimPatRegion contained transparent matchgroup=vimPatSepR start="\\[z%]\=(" end="\\)" contains=@vimSubstList oneline ++syn match vimNotPatSep contained "\\\\" ++syn cluster vimStringGroup contains=vimEscapeBrace,vimPatSep,vimNotPatSep,vimPatSepErr,vimPatSepZone,@Spell ++syn region vimString oneline keepend start=+[^:a-zA-Z>!\\@]"+lc=1 skip=+\\\\\|\\"+ end=+"+ contains=@vimStringGroup ++syn region vimString oneline keepend start=+[^:a-zA-Z>!\\@]'+lc=1 end=+'+ ++syn region vimString oneline start=+=!+lc=1 skip=+\\\\\|\\!+ end=+!+ contains=@vimStringGroup ++syn region vimString oneline start="=+"lc=1 skip="\\\\\|\\+" end="+" contains=@vimStringGroup ++syn region vimString oneline start="\s/\s*\A"lc=1 skip="\\\\\|\\+" end="/" contains=@vimStringGroup ++syn match vimString contained +"[^"]*\\$+ skipnl nextgroup=vimStringCont ++syn match vimStringCont contained +\(\\\\\|.\)\{-}[^\\]"+ + + " Substitutions: {{{2 + " ============= +-syn cluster vimSubstList contains=vimPatSep,vimPatRegion,vimPatSepErr,vimSubstTwoBS,vimSubstRange,vimNotation +-syn cluster vimSubstRepList contains=vimSubstSubstr,vimSubstTwoBS,vimNotation +-syn cluster vimSubstList add=vimCollection +-syn match vimSubst "\(:\+\s*\|^\s*\||\s*\)\<s\%[ubstitute][:[:alpha:]]\@!" nextgroup=vimSubstPat +-syn match vimSubst "s\%[ubstitute][:[:alpha:]]\@!" nextgroup=vimSubstPat contained +-syn match vimSubst "/\zss\%[ubstitute]\ze/" nextgroup=vimSubstPat +-syn match vimSubst1 contained "s\%[ubstitute]\>" nextgroup=vimSubstPat +-syn region vimSubstPat contained matchgroup=vimSubstDelim start="\z([^a-zA-Z( \t[\]&]\)"rs=s+1 skip="\\\\\|\\\z1" end="\z1"re=e-1,me=e-1 contains=@vimSubstList nextgroup=vimSubstRep4 oneline +-syn region vimSubstRep4 contained matchgroup=vimSubstDelim start="\z(.\)" skip="\\\\\|\\\z1" end="\z1" matchgroup=vimNotation end="<[cC][rR]>" contains=@vimSubstRepList nextgroup=vimSubstFlagErr oneline +-syn region vimCollection contained transparent start="\\\@<!\[" skip="\\\[" end="\]" contains=vimCollClass +-syn match vimCollClassErr contained "\[:.\{-\}:\]" +-syn match vimCollClass contained transparent "\[:\(alnum\|alpha\|blank\|cntrl\|digit\|graph\|lower\|print\|punct\|space\|upper\|xdigit\|return\|tab\|escape\|backspace\):\]" +-syn match vimSubstSubstr contained "\\z\=\d" +-syn match vimSubstTwoBS contained "\\\\" +-syn match vimSubstFlagErr contained "[^< \t\r|]\+" contains=vimSubstFlags +-syn match vimSubstFlags contained "[&cegiIpr]\+" ++syn cluster vimSubstList contains=vimPatSep,vimPatRegion,vimPatSepErr,vimSubstTwoBS,vimSubstRange,vimNotation ++syn cluster vimSubstRepList contains=vimSubstSubstr,vimSubstTwoBS,vimNotation ++syn cluster vimSubstList add=vimCollection ++syn match vimSubst "\(:\+\s*\|^\s*\||\s*\)\<s\%[ubstitute][:[:alpha:]]\@!" nextgroup=vimSubstPat ++syn match vimSubst "s\%[ubstitute][:#[:alpha:]]\@!" nextgroup=vimSubstPat contained ++syn match vimSubst "/\zss\%[ubstitute]\ze/" nextgroup=vimSubstPat ++syn match vimSubst1 contained "s\%[ubstitute]\>" nextgroup=vimSubstPat ++syn region vimSubstPat contained matchgroup=vimSubstDelim start="\z([^a-zA-Z( \t[\]&]\)"rs=s+1 skip="\\\\\|\\\z1" end="\z1"re=e-1,me=e-1 contains=@vimSubstList nextgroup=vimSubstRep4 oneline ++syn region vimSubstRep4 contained matchgroup=vimSubstDelim start="\z(.\)" skip="\\\\\|\\\z1" end="\z1" matchgroup=vimNotation end="<[cC][rR]>" contains=@vimSubstRepList nextgroup=vimSubstFlagErr oneline ++syn region vimCollection contained transparent start="\\\@<!\[" skip="\\\[" end="\]" contains=vimCollClass ++syn match vimCollClassErr contained "\[:.\{-\}:\]" ++syn match vimCollClass contained transparent "\[:\(alnum\|alpha\|blank\|cntrl\|digit\|graph\|lower\|print\|punct\|space\|upper\|xdigit\|return\|tab\|escape\|backspace\):\]" ++syn match vimSubstSubstr contained "\\z\=\d" ++syn match vimSubstTwoBS contained "\\\\" ++syn match vimSubstFlagErr contained "[^< \t\r|]\+" contains=vimSubstFlags ++syn match vimSubstFlags contained "[&cegiIpr]\+" + + " 'String': {{{2 +-syn match vimString "[^(,]'[^']\{-}\zs'" ++syn match vimString "[^(,]'[^']\{-}\zs'" + + " Marks, Registers, Addresses, Filters: {{{2 +-syn match vimMark "'[a-zA-Z0-9]\ze[-+,!]" nextgroup=vimOper,vimMarkNumber,vimSubst +-syn match vimMark "'[<>]\ze[-+,!]" nextgroup=vimOper,vimMarkNumber,vimSubst +-syn match vimMark ",\zs'[<>]\ze" nextgroup=vimOper,vimMarkNumber,vimSubst +-syn match vimMark "[!,:]\zs'[a-zA-Z0-9]" nextgroup=vimOper,vimMarkNumber,vimSubst +-syn match vimMark "\<norm\%[al]\s\zs'[a-zA-Z0-9]" nextgroup=vimOper,vimMarkNumber,vimSubst +-syn match vimMarkNumber "[-+]\d\+" nextgroup=vimSubst contained contains=vimOper +-syn match vimPlainMark contained "'[a-zA-Z0-9]" +- +-syn match vimRegister '[^,;]\zs"[a-zA-Z0-9.%#:_\-/]\ze[^a-zA-Z_":]' +-syn match vimRegister '\<norm\s\+\zs"[a-zA-Z0-9]' +-syn match vimRegister '\<normal\s\+\zs"[a-zA-Z0-9]' +-syn match vimRegister '@"' +-syn match vimPlainRegister contained '"[a-zA-Z0-9\-:.%#*+=]' ++syn match vimMark "'[a-zA-Z0-9]\ze[-+,!]" nextgroup=vimOper,vimMarkNumber,vimSubst ++syn match vimMark "'[<>]\ze[-+,!]" nextgroup=vimOper,vimMarkNumber,vimSubst ++syn match vimMark ",\zs'[<>]\ze" nextgroup=vimOper,vimMarkNumber,vimSubst ++syn match vimMark "[!,:]\zs'[a-zA-Z0-9]" nextgroup=vimOper,vimMarkNumber,vimSubst ++syn match vimMark "\<norm\%[al]\s\zs'[a-zA-Z0-9]" nextgroup=vimOper,vimMarkNumber,vimSubst ++syn match vimMarkNumber "[-+]\d\+" nextgroup=vimSubst contained contains=vimOper ++syn match vimPlainMark contained "'[a-zA-Z0-9]" ++ ++syn match vimRegister '[^,;[{]\zs"[a-zA-Z0-9.%#:_\-/]\ze[^a-zA-Z_":]' ++syn match vimRegister '\<norm\s\+\zs"[a-zA-Z0-9]' ++syn match vimRegister '\<normal\s\+\zs"[a-zA-Z0-9]' ++syn match vimRegister '@"' ++syn match vimPlainRegister contained '"[a-zA-Z0-9\-:.%#*+=]' + +-syn match vimAddress ",\zs[.$]" skipwhite nextgroup=vimSubst1 +-syn match vimAddress "%\ze\a" skipwhite nextgroup=vimString,vimSubst1 ++syn match vimAddress ",\zs[.$]" skipwhite nextgroup=vimSubst1 ++syn match vimAddress "%\ze\a" skipwhite nextgroup=vimString,vimSubst1 + +-syn match vimFilter contained "^!.\{-}\(|\|$\)" contains=vimSpecFile +-syn match vimFilter contained "\A!.\{-}\(|\|$\)"ms=s+1 contains=vimSpecFile ++syn match vimFilter contained "^!.\{-}\(|\|$\)" contains=vimSpecFile ++syn match vimFilter contained "\A!.\{-}\(|\|$\)"ms=s+1 contains=vimSpecFile + + " Complex repeats (:h complex-repeat) {{{2 +-"syn match vimCmplxRepeat '[^a-zA-Z_/\\()]q[0-9a-zA-Z"]'lc=1 +-"syn match vimCmplxRepeat '@[0-9a-z".=@:]\ze\($\|[^a-zA-Z]\)' ++syn match vimCmplxRepeat '[^a-zA-Z_/\\()]q[0-9a-zA-Z"]'lc=1 ++syn match vimCmplxRepeat '@[0-9a-z".=@:]\ze\($\|[^a-zA-Z]\)' + + " Set command and associated set-options (vimOptions) with comment {{{2 +-syn region vimSet matchgroup=vimCommand start="\<\%(setl\%[ocal]\|setg\%[lobal]\|set\)\>" skip="\%(\\\\\)*\\." end="$" matchgroup=vimNotation end="<[cC][rR]>" keepend oneline contains=vimSetEqual,vimOption,vimErrSetting,vimComment,vimSetString,vimSetMod +-syn region vimSetEqual contained start="=" skip="\\\\\|\\\s" end="[| \t]\|$"me=e-1 contains=vimCtrlChar,vimSetSep,vimNotation oneline +-syn region vimSetString contained start=+="+hs=s+1 skip=+\\\\\|\\"+ end=+"+ contains=vimCtrlChar +-syn match vimSetSep contained "[,:]" +-syn match vimSetMod contained "&vim\|[!&]\|all&" ++syn region vimSet matchgroup=vimCommand start="\<\%(setl\%[ocal]\|setg\%[lobal]\|set\)\>" skip="\%(\\\\\)*\\." end="$" matchgroup=vimNotation end="<[cC][rR]>" keepend oneline contains=vimSetEqual,vimOption,vimErrSetting,vimComment,vimSetString,vimSetMod ++syn region vimSetEqual contained start="[=:]\|[-+^]=" skip="\\\\\|\\\s" end="[| \t]\|$"me=e-1 contains=vimCtrlChar,vimSetSep,vimNotation oneline ++syn region vimSetString contained start=+="+hs=s+1 skip=+\\\\\|\\"+ end=+"+ contains=vimCtrlChar ++syn match vimSetSep contained "[,:]" ++syn match vimSetMod contained "&vim\=\|[!&?<]\|all&" + + " Let {{{2 + " === +-syn keyword vimLet let unl[et] skipwhite nextgroup=vimVar ++syn keyword vimLet let unl[et] skipwhite nextgroup=vimVar,vimFuncVar + + " Abbreviations {{{2 + " ============= +@@ -298,232 +297,235 @@ + + " Autocmd {{{2 + " ======= +-syn match vimAutoEventList contained "\(!\s\+\)\=\(\a\+,\)*\a\+" contains=vimAutoEvent nextgroup=vimAutoCmdSpace +-syn match vimAutoCmdSpace contained "\s\+" nextgroup=vimAutoCmdSfxList +-syn match vimAutoCmdSfxList contained "\S*" +-syn keyword vimAutoCmd au[tocmd] do[autocmd] doautoa[ll] skipwhite nextgroup=vimAutoEventList ++syn match vimAutoEventList contained "\(!\s\+\)\=\(\a\+,\)*\a\+" contains=vimAutoEvent nextgroup=vimAutoCmdSpace ++syn match vimAutoCmdSpace contained "\s\+" nextgroup=vimAutoCmdSfxList ++syn match vimAutoCmdSfxList contained "\S*" ++syn keyword vimAutoCmd au[tocmd] do[autocmd] doautoa[ll] skipwhite nextgroup=vimAutoEventList + + " Echo and Execute -- prefer strings! {{{2 + " ================ +-syn region vimEcho oneline excludenl matchgroup=vimCommand start="\<ec\%[ho]\>" skip="\(\\\\\)*\\|" end="$\||" contains=vimFunc,vimString,varVar +-syn region vimExecute oneline excludenl matchgroup=vimCommand start="\<exe\%[cute]\>" skip="\(\\\\\)*\\|" end="$\||\|<[cC][rR]>" contains=vimIsCommand,vimString,vimOper,vimVar,vimNotation,vimOperParen +-syn match vimEchoHL "echohl\=" skipwhite nextgroup=vimGroup,vimHLGroup,vimEchoHLNone ++syn region vimEcho oneline excludenl matchgroup=vimCommand start="\<ec\%[ho]\>" skip="\(\\\\\)*\\|" end="$\||" contains=vimFunc,vimFuncVar,vimString,vimVar ++syn region vimExecute oneline excludenl matchgroup=vimCommand start="\<exe\%[cute]\>" skip="\(\\\\\)*\\|" end="$\||\|<[cC][rR]>" contains=vimFuncVar,vimIsCommand,vimOper,vimNotation,vimOperParen,vimString,vimVar ++syn match vimEchoHL "echohl\=" skipwhite nextgroup=vimGroup,vimHLGroup,vimEchoHLNone + syn case ignore +-syn keyword vimEchoHLNone none ++syn keyword vimEchoHLNone none + syn case match + + " Maps {{{2 + " ==== +-syn match vimMap "\<map\>!\=\ze\s*[^(]" skipwhite nextgroup=vimMapMod,vimMapLhs +-syn keyword vimMap cm[ap] cno[remap] im[ap] ino[remap] ln[oremap] nm[ap] nn[oremap] no[remap] om[ap] ono[remap] snor[emap] vm[ap] vn[oremap] xn[oremap] skipwhite nextgroup=vimMapBang,vimMapMod,vimMapLhs +-syn keyword vimMap mapc[lear] +-syn match vimMapLhs contained "\S\+" contains=vimNotation,vimCtrlChar skipwhite nextgroup=vimMapRhs +-syn match vimMapBang contained "!" skipwhite nextgroup=vimMapMod,vimMapLhs +-syn match vimMapMod contained "\c<\(buffer\|expr\|\(local\)\=leader\|plug\|script\|sid\|unique\|silent\)\+>" contains=vimMapModKey,vimMapModErr skipwhite nextgroup=vimMapMod,vimMapLhs +-syn match vimMapRhs contained ".*" contains=vimNotation,vimCtrlChar skipnl nextgroup=vimMapRhsExtend +-syn match vimMapRhsExtend contained "^\s*\\.*$" contains=vimContinue ++syn match vimMap "\<map\>!\=\ze\s*[^(]" skipwhite nextgroup=vimMapMod,vimMapLhs ++syn keyword vimMap cm[ap] cno[remap] im[ap] ino[remap] lm[ap] ln[oremap] nm[ap] nn[oremap] no[remap] om[ap] ono[remap] smap snor[emap] vm[ap] vn[oremap] xm[ap] xn[oremap] skipwhite nextgroup=vimMapBang,vimMapMod,vimMapLhs ++syn keyword vimMap mapc[lear] ++syn keyword vimUnmap cu[nmap] iu[nmap] lu[nmap] nun[map] ou[nmap] sunm[ap] unm[ap] unm[ap] vu[nmap] xu[nmap] skipwhite nextgroup=vimMapBang,vimMapMod,vimMapLhs ++syn match vimMapLhs contained "\S\+" contains=vimNotation,vimCtrlChar skipwhite nextgroup=vimMapRhs ++syn match vimMapBang contained "!" skipwhite nextgroup=vimMapMod,vimMapLhs ++syn match vimMapMod contained "\c<\(buffer\|expr\|\(local\)\=leader\|plug\|script\|sid\|unique\|silent\)\+>" contains=vimMapModKey,vimMapModErr skipwhite nextgroup=vimMapMod,vimMapLhs ++syn match vimMapRhs contained ".*" contains=vimNotation,vimCtrlChar skipnl nextgroup=vimMapRhsExtend ++syn match vimMapRhsExtend contained "^\s*\\.*$" contains=vimContinue + syn case ignore +-syn keyword vimMapModKey contained buffer expr leader localleader plug script sid silent unique ++syn keyword vimMapModKey contained buffer expr leader localleader plug script sid silent unique + syn case match + + " Menus {{{2 + " ===== +-syn cluster vimMenuList contains=vimMenuBang,vimMenuPriority,vimMenuName,vimMenuMod +-syn keyword vimCommand am[enu] an[oremenu] aun[menu] cme[nu] cnoreme[nu] cunme[nu] ime[nu] inoreme[nu] iunme[nu] me[nu] nme[nu] nnoreme[nu] noreme[nu] nunme[nu] ome[nu] onoreme[nu] ounme[nu] unme[nu] vme[nu] vnoreme[nu] vunme[nu] skipwhite nextgroup=@vimMenuList +-syn match vimMenuName "[^ \t\\<]\+" contained nextgroup=vimMenuNameMore,vimMenuMap +-syn match vimMenuPriority "\d\+\(\.\d\+\)*" contained skipwhite nextgroup=vimMenuName +-syn match vimMenuNameMore "\c\\\s\|<tab>\|\\\." contained nextgroup=vimMenuName,vimMenuNameMore contains=vimNotation +-syn match vimMenuMod contained "\c<\(script\|silent\)\+>" skipwhite contains=vimMapModKey,vimMapModErr nextgroup=@vimMenuList +-syn match vimMenuMap "\s" contained skipwhite nextgroup=vimMenuRhs +-syn match vimMenuRhs ".*$" contained contains=vimString,vimComment,vimIsCommand +-syn match vimMenuBang "!" contained skipwhite nextgroup=@vimMenuList ++syn cluster vimMenuList contains=vimMenuBang,vimMenuPriority,vimMenuName,vimMenuMod ++syn keyword vimCommand am[enu] an[oremenu] aun[menu] cme[nu] cnoreme[nu] cunme[nu] ime[nu] inoreme[nu] iunme[nu] me[nu] nme[nu] nnoreme[nu] noreme[nu] nunme[nu] ome[nu] onoreme[nu] ounme[nu] unme[nu] vme[nu] vnoreme[nu] vunme[nu] skipwhite nextgroup=@vimMenuList ++syn match vimMenuName "[^ \t\\<]\+" contained nextgroup=vimMenuNameMore,vimMenuMap ++syn match vimMenuPriority "\d\+\(\.\d\+\)*" contained skipwhite nextgroup=vimMenuName ++syn match vimMenuNameMore "\c\\\s\|<tab>\|\\\." contained nextgroup=vimMenuName,vimMenuNameMore contains=vimNotation ++syn match vimMenuMod contained "\c<\(script\|silent\)\+>" skipwhite contains=vimMapModKey,vimMapModErr nextgroup=@vimMenuList ++syn match vimMenuMap "\s" contained skipwhite nextgroup=vimMenuRhs ++syn match vimMenuRhs ".*$" contained contains=vimString,vimComment,vimIsCommand ++syn match vimMenuBang "!" contained skipwhite nextgroup=@vimMenuList + + " Angle-Bracket Notation (tnx to Michael Geddes) {{{2 + " ====================== + syn case ignore +-syn match vimNotation "\(\\\|<lt>\)\=<\([scamd]-\)\{0,4}x\=\(f\d\{1,2}\|[^ \t:]\|cr\|lf\|linefeed\|return\|k\=del\%[ete]\|bs\|backspace\|tab\|esc\|right\|left\|help\|undo\|insert\|ins\|k\=home\|k\=end\|kplus\|kminus\|kdivide\|kmultiply\|kenter\|space\|k\=\(page\)\=\(\|down\|up\)\)>" contains=vimBracket +-syn match vimNotation "\(\\\|<lt>\)\=<\([scam2-4]-\)\{0,4}\(right\|left\|middle\)\(mouse\)\=\(drag\|release\)\=>" contains=vimBracket +-syn match vimNotation "\(\\\|<lt>\)\=<\(bslash\|plug\|sid\|space\|bar\|nop\|nul\|lt\)>" contains=vimBracket +-syn match vimNotation '\(\\\|<lt>\)\=<C-R>[0-9a-z"%#:.\-=]'he=e-1 contains=vimBracket +-syn match vimNotation '\(\\\|<lt>\)\=<\%(q-\)\=\(line[12]\|count\|bang\|reg\|args\|f-args\|lt\)>' contains=vimBracket +-syn match vimNotation "\(\\\|<lt>\)\=<\([cas]file\|abuf\|amatch\|cword\|cWORD\|client\)>" contains=vimBracket +-syn match vimBracket contained "[\\<>]" ++syn match vimNotation "\(\\\|<lt>\)\=<\([scamd]-\)\{0,4}x\=\(f\d\{1,2}\|[^ \t:]\|cr\|lf\|linefeed\|return\|k\=del\%[ete]\|bs\|backspace\|tab\|esc\|right\|left\|help\|undo\|insert\|ins\|k\=home\|k\=end\|kplus\|kminus\|kdivide\|kmultiply\|kenter\|space\|k\=\(page\)\=\(\|down\|up\)\)>" contains=vimBracket ++syn match vimNotation "\(\\\|<lt>\)\=<\([scam2-4]-\)\{0,4}\(right\|left\|middle\)\(mouse\)\=\(drag\|release\)\=>" contains=vimBracket ++syn match vimNotation "\(\\\|<lt>\)\=<\(bslash\|plug\|sid\|space\|bar\|nop\|nul\|lt\)>" contains=vimBracket ++syn match vimNotation '\(\\\|<lt>\)\=<C-R>[0-9a-z"%#:.\-=]'he=e-1 contains=vimBracket ++syn match vimNotation '\(\\\|<lt>\)\=<\%(q-\)\=\(line[12]\|count\|bang\|reg\|args\|f-args\|lt\)>' contains=vimBracket ++syn match vimNotation "\(\\\|<lt>\)\=<\([cas]file\|abuf\|amatch\|cword\|cWORD\|client\)>" contains=vimBracket ++syn match vimBracket contained "[\\<>]" + syn case match + + " User Function Highlighting {{{2 + " (following Gautam Iyer's suggestion) + " ========================== +-syn match vimFunc "\%(\%([gGsS]:\|<[sS][iI][dD]>\)\=\%([a-zA-Z0-9_.]\+\.\)*\I[a-zA-Z0-9_.]*\)\ze\s*(" contains=vimFuncName,vimUserFunc,vimExecute +-syn match vimUserFunc contained "\%(\%([gGsS]:\|<[sS][iI][dD]>\)\=\%([a-zA-Z0-9_.]\+\.\)*\I[a-zA-Z0-9_.]*\)\|\<\u[a-zA-Z0-9.]*\>\|\<if\>" contains=vimNotation +-syn match vimNotFunc "\<if\>\|\<el\%[seif]\>" ++syn match vimFunc "\%(\%([sSgGbBwWtTlL]:\|<[sS][iI][dD]>\)\=\%([a-zA-Z0-9_.]\+\.\)*\I[a-zA-Z0-9_.]*\)\ze\s*(" contains=vimFuncName,vimUserFunc,vimExecute ++syn match vimUserFunc contained "\%(\%([sSgGbBwWtTlL]:\|<[sS][iI][dD]>\)\=\%([a-zA-Z0-9_.]\+\.\)*\I[a-zA-Z0-9_.]*\)\|\<\u[a-zA-Z0-9.]*\>\|\<if\>" contains=vimNotation ++syn match vimNotFunc "\<if\>\|\<el\%[seif]\>\|\<return\>\|\<while\>" + + " Errors And Warnings: {{{2 + " ==================== + if !exists("g:vimsyn_noerror") +- syn match vimElseIfErr "\<else\s\+if\>" +- syn match vimBufnrWarn /\<bufnr\s*(\s*["']\.['"]\s*)/ ++ syn match vimFunctionError "\s\zs[a-z0-9]\i\{-}\ze\s*(" contained contains=vimFuncKey,vimFuncBlank ++" syn match vimFunctionError "\s\zs\%(<[sS][iI][dD]>\|[sSgGbBwWtTlL]:\)[0-9]\i\{-}\ze\s*(" contained contains=vimFuncKey,vimFuncBlank ++ syn match vimElseIfErr "\<else\s\+if\>" ++ syn match vimBufnrWarn /\<bufnr\s*(\s*["']\.['"]\s*)/ + endif + + " Norm {{{2 + " ==== +-syn match vimNorm "\<norm\%[al]!\=" skipwhite nextgroup=vimNormCmds +-syn match vimNormCmds contained ".*$" ++syn match vimNorm "\<norm\%[al]!\=" skipwhite nextgroup=vimNormCmds ++syn match vimNormCmds contained ".*$" + + " Syntax {{{2 + "======= +-syn match vimGroupList contained "@\=[^ \t,]*" contains=vimGroupSpecial,vimPatSep +-syn match vimGroupList contained "@\=[^ \t,]*," nextgroup=vimGroupList contains=vimGroupSpecial,vimPatSep +-syn keyword vimGroupSpecial contained ALL ALLBUT +-if !exists("g:vimsyn_noerror") +- syn match vimSynError contained "\i\+" +- syn match vimSynError contained "\i\+=" nextgroup=vimGroupList +-endif +-syn match vimSynContains contained "\<contain\(s\|edin\)=" nextgroup=vimGroupList +-syn match vimSynKeyContainedin contained "\<containedin=" nextgroup=vimGroupList +-syn match vimSynNextgroup contained "nextgroup=" nextgroup=vimGroupList ++syn match vimGroupList contained "@\=[^ \t,]*" contains=vimGroupSpecial,vimPatSep ++syn match vimGroupList contained "@\=[^ \t,]*," nextgroup=vimGroupList contains=vimGroupSpecial,vimPatSep ++syn keyword vimGroupSpecial contained ALL ALLBUT CONTAINED TOP ++if !exists("g:vimsyn_noerror") ++ syn match vimSynError contained "\i\+" ++ syn match vimSynError contained "\i\+=" nextgroup=vimGroupList ++endif ++syn match vimSynContains contained "\<contain\(s\|edin\)=" nextgroup=vimGroupList ++syn match vimSynKeyContainedin contained "\<containedin=" nextgroup=vimGroupList ++syn match vimSynNextgroup contained "nextgroup=" nextgroup=vimGroupList + +-syn match vimSyntax "\<sy\%[ntax]\>" contains=vimCommand skipwhite nextgroup=vimSynType,vimComment +-syn match vimAuSyntax contained "\s+sy\%[ntax]" contains=vimCommand skipwhite nextgroup=vimSynType,vimComment ++syn match vimSyntax "\<sy\%[ntax]\>" contains=vimCommand skipwhite nextgroup=vimSynType,vimComment ++syn match vimAuSyntax contained "\s+sy\%[ntax]" contains=vimCommand skipwhite nextgroup=vimSynType,vimComment + + " Syntax: case {{{2 +-syn keyword vimSynType contained case skipwhite nextgroup=vimSynCase,vimSynCaseError ++syn keyword vimSynType contained case skipwhite nextgroup=vimSynCase,vimSynCaseError + if !exists("g:vimsyn_noerror") +- syn match vimSynCaseError contained "\i\+" ++ syn match vimSynCaseError contained "\i\+" + endif +-syn keyword vimSynCase contained ignore match ++syn keyword vimSynCase contained ignore match + + " Syntax: clear {{{2 +-syn keyword vimSynType contained clear skipwhite nextgroup=vimGroupList ++syn keyword vimSynType contained clear skipwhite nextgroup=vimGroupList + + " Syntax: cluster {{{2 +-syn keyword vimSynType contained cluster skipwhite nextgroup=vimClusterName +-syn region vimClusterName contained matchgroup=vimGroupName start="\k\+" skip="\\\\\|\\|" matchgroup=vimSep end="$\||" contains=vimGroupAdd,vimGroupRem,vimSynContains,vimSynError +-syn match vimGroupAdd contained "add=" nextgroup=vimGroupList +-syn match vimGroupRem contained "remove=" nextgroup=vimGroupList ++syn keyword vimSynType contained cluster skipwhite nextgroup=vimClusterName ++syn region vimClusterName contained matchgroup=vimGroupName start="\k\+" skip="\\\\\|\\|" matchgroup=vimSep end="$\||" contains=vimGroupAdd,vimGroupRem,vimSynContains,vimSynError ++syn match vimGroupAdd contained "add=" nextgroup=vimGroupList ++syn match vimGroupRem contained "remove=" nextgroup=vimGroupList + + " Syntax: include {{{2 +-syn keyword vimSynType contained include skipwhite nextgroup=vimGroupList ++syn keyword vimSynType contained include skipwhite nextgroup=vimGroupList + + " Syntax: keyword {{{2 +-syn cluster vimSynKeyGroup contains=vimSynNextgroup,vimSynKeyOpt,vimSynKeyContainedin +-syn keyword vimSynType contained keyword skipwhite nextgroup=vimSynKeyRegion +-syn region vimSynKeyRegion contained oneline keepend matchgroup=vimGroupName start="\k\+" skip="\\\\\|\\|" matchgroup=vimSep end="|\|$" contains=@vimSynKeyGroup +-syn match vimSynKeyOpt contained "\<\(conceal\|contained\|transparent\|skipempty\|skipwhite\|skipnl\)\>" ++syn cluster vimSynKeyGroup contains=vimSynNextgroup,vimSynKeyOpt,vimSynKeyContainedin ++syn keyword vimSynType contained keyword skipwhite nextgroup=vimSynKeyRegion ++syn region vimSynKeyRegion contained oneline keepend matchgroup=vimGroupName start="\k\+" skip="\\\\\|\\|" matchgroup=vimSep end="|\|$" contains=@vimSynKeyGroup ++syn match vimSynKeyOpt contained "\<\(conceal\|contained\|transparent\|skipempty\|skipwhite\|skipnl\)\>" + + " Syntax: match {{{2 +-syn cluster vimSynMtchGroup contains=vimMtchComment,vimSynContains,vimSynError,vimSynMtchOpt,vimSynNextgroup,vimSynRegPat,vimNotation +-syn keyword vimSynType contained match skipwhite nextgroup=vimSynMatchRegion +-syn region vimSynMatchRegion contained keepend matchgroup=vimGroupName start="\k\+" matchgroup=vimSep end="|\|$" contains=@vimSynMtchGroup +-syn match vimSynMtchOpt contained "\<\(conceal\|transparent\|contained\|excludenl\|skipempty\|skipwhite\|display\|extend\|skipnl\|fold\)\>" ++syn cluster vimSynMtchGroup contains=vimMtchComment,vimSynContains,vimSynError,vimSynMtchOpt,vimSynNextgroup,vimSynRegPat,vimNotation ++syn keyword vimSynType contained match skipwhite nextgroup=vimSynMatchRegion ++syn region vimSynMatchRegion contained keepend matchgroup=vimGroupName start="\k\+" matchgroup=vimSep end="|\|$" contains=@vimSynMtchGroup ++syn match vimSynMtchOpt contained "\<\(conceal\|transparent\|contained\|excludenl\|skipempty\|skipwhite\|display\|extend\|skipnl\|fold\)\>" + if has("conceal") +- syn match vimSynMtchOpt contained "\<cchar=" nextgroup=VimSynMtchCchar +- syn match vimSynMtchCchar contained "." ++ syn match vimSynMtchOpt contained "\<cchar=" nextgroup=VimSynMtchCchar ++ syn match vimSynMtchCchar contained "\S" + endif + + " Syntax: off and on {{{2 +-syn keyword vimSynType contained enable list manual off on reset ++syn keyword vimSynType contained enable list manual off on reset + + " Syntax: region {{{2 +-syn cluster vimSynRegPatGroup contains=vimPatSep,vimNotPatSep,vimSynPatRange,vimSynNotPatRange,vimSubstSubstr,vimPatRegion,vimPatSepErr,vimNotation +-syn cluster vimSynRegGroup contains=vimSynContains,vimSynNextgroup,vimSynRegOpt,vimSynReg,vimSynMtchGrp +-syn keyword vimSynType contained region skipwhite nextgroup=vimSynRegion +-syn region vimSynRegion contained keepend matchgroup=vimGroupName start="\k\+" skip="\\\\\|\\|" end="|\|$" contains=@vimSynRegGroup +-syn match vimSynRegOpt contained "\<\(conceal\(ends\)\=\|transparent\|contained\|excludenl\|skipempty\|skipwhite\|display\|keepend\|oneline\|extend\|skipnl\|fold\)\>" +-syn match vimSynReg contained "\(start\|skip\|end\)="he=e-1 nextgroup=vimSynRegPat +-syn match vimSynMtchGrp contained "matchgroup=" nextgroup=vimGroup,vimHLGroup +-syn region vimSynRegPat contained extend start="\z([-`~!@#$%^&*_=+;:'",./?]\)" skip="\\\\\|\\\z1" end="\z1" contains=@vimSynRegPatGroup skipwhite nextgroup=vimSynPatMod,vimSynReg +-syn match vimSynPatMod contained "\(hs\|ms\|me\|hs\|he\|rs\|re\)=[se]\([-+]\d\+\)\=" +-syn match vimSynPatMod contained "\(hs\|ms\|me\|hs\|he\|rs\|re\)=[se]\([-+]\d\+\)\=," nextgroup=vimSynPatMod +-syn match vimSynPatMod contained "lc=\d\+" +-syn match vimSynPatMod contained "lc=\d\+," nextgroup=vimSynPatMod +-syn region vimSynPatRange contained start="\[" skip="\\\\\|\\]" end="]" +-syn match vimSynNotPatRange contained "\\\\\|\\\[" +-syn match vimMtchComment contained '"[^"]\+$' ++syn cluster vimSynRegPatGroup contains=vimPatSep,vimNotPatSep,vimSynPatRange,vimSynNotPatRange,vimSubstSubstr,vimPatRegion,vimPatSepErr,vimNotation ++syn cluster vimSynRegGroup contains=vimSynContains,vimSynNextgroup,vimSynRegOpt,vimSynReg,vimSynMtchGrp ++syn keyword vimSynType contained region skipwhite nextgroup=vimSynRegion ++syn region vimSynRegion contained keepend matchgroup=vimGroupName start="\k\+" skip="\\\\\|\\|" end="|\|$" contains=@vimSynRegGroup ++syn match vimSynRegOpt contained "\<\(conceal\(ends\)\=\|transparent\|contained\|excludenl\|skipempty\|skipwhite\|display\|keepend\|oneline\|extend\|skipnl\|fold\)\>" ++syn match vimSynReg contained "\(start\|skip\|end\)="he=e-1 nextgroup=vimSynRegPat ++syn match vimSynMtchGrp contained "matchgroup=" nextgroup=vimGroup,vimHLGroup ++syn region vimSynRegPat contained extend start="\z([-`~!@#$%^&*_=+;:'",./?]\)" skip="\\\\\|\\\z1" end="\z1" contains=@vimSynRegPatGroup skipwhite nextgroup=vimSynPatMod,vimSynReg ++syn match vimSynPatMod contained "\(hs\|ms\|me\|hs\|he\|rs\|re\)=[se]\([-+]\d\+\)\=" ++syn match vimSynPatMod contained "\(hs\|ms\|me\|hs\|he\|rs\|re\)=[se]\([-+]\d\+\)\=," nextgroup=vimSynPatMod ++syn match vimSynPatMod contained "lc=\d\+" ++syn match vimSynPatMod contained "lc=\d\+," nextgroup=vimSynPatMod ++syn region vimSynPatRange contained start="\[" skip="\\\\\|\\]" end="]" ++syn match vimSynNotPatRange contained "\\\\\|\\\[" ++syn match vimMtchComment contained '"[^"]\+$' + + " Syntax: sync {{{2 + " ============ + syn keyword vimSynType contained sync skipwhite nextgroup=vimSyncC,vimSyncLines,vimSyncMatch,vimSyncError,vimSyncLinebreak,vimSyncLinecont,vimSyncRegion + if !exists("g:vimsyn_noerror") +- syn match vimSyncError contained "\i\+" ++ syn match vimSyncError contained "\i\+" + endif +-syn keyword vimSyncC contained ccomment clear fromstart +-syn keyword vimSyncMatch contained match skipwhite nextgroup=vimSyncGroupName +-syn keyword vimSyncRegion contained region skipwhite nextgroup=vimSynReg +-syn match vimSyncLinebreak contained "\<linebreaks=" skipwhite nextgroup=vimNumber +-syn keyword vimSyncLinecont contained linecont skipwhite nextgroup=vimSynRegPat +-syn match vimSyncLines contained "\(min\|max\)\=lines=" nextgroup=vimNumber +-syn match vimSyncGroupName contained "\k\+" skipwhite nextgroup=vimSyncKey +-syn match vimSyncKey contained "\<groupthere\|grouphere\>" skipwhite nextgroup=vimSyncGroup +-syn match vimSyncGroup contained "\k\+" skipwhite nextgroup=vimSynRegPat,vimSyncNone +-syn keyword vimSyncNone contained NONE ++syn keyword vimSyncC contained ccomment clear fromstart ++syn keyword vimSyncMatch contained match skipwhite nextgroup=vimSyncGroupName ++syn keyword vimSyncRegion contained region skipwhite nextgroup=vimSynReg ++syn match vimSyncLinebreak contained "\<linebreaks=" skipwhite nextgroup=vimNumber ++syn keyword vimSyncLinecont contained linecont skipwhite nextgroup=vimSynRegPat ++syn match vimSyncLines contained "\(min\|max\)\=lines=" nextgroup=vimNumber ++syn match vimSyncGroupName contained "\k\+" skipwhite nextgroup=vimSyncKey ++syn match vimSyncKey contained "\<groupthere\|grouphere\>" skipwhite nextgroup=vimSyncGroup ++syn match vimSyncGroup contained "\k\+" skipwhite nextgroup=vimSynRegPat,vimSyncNone ++syn keyword vimSyncNone contained NONE + + " Additional IsCommand, here by reasons of precedence {{{2 + " ==================== +-syn match vimIsCommand "<Bar>\s*\a\+" transparent contains=vimCommand,vimNotation ++syn match vimIsCommand "<Bar>\s*\a\+" transparent contains=vimCommand,vimNotation + + " Highlighting {{{2 + " ============ +-syn cluster vimHighlightCluster contains=vimHiLink,vimHiClear,vimHiKeyList,vimComment +-syn match vimHighlight "\<hi\%[ghlight]\>" skipwhite nextgroup=vimHiBang,@vimHighlightCluster +-syn match vimHiBang contained "!" skipwhite nextgroup=@vimHighlightCluster +- +-syn match vimHiGroup contained "\i\+" ++syn cluster vimHighlightCluster contains=vimHiLink,vimHiClear,vimHiKeyList,vimComment ++syn match vimHighlight "\<hi\%[ghlight]\>" skipwhite nextgroup=vimHiBang,@vimHighlightCluster ++syn match vimHiBang contained "!" skipwhite nextgroup=@vimHighlightCluster ++ ++syn match vimHiGroup contained "\i\+" + syn case ignore +-syn keyword vimHiAttrib contained none bold inverse italic reverse standout underline undercurl +-syn keyword vimFgBgAttrib contained none bg background fg foreground ++syn keyword vimHiAttrib contained none bold inverse italic reverse standout underline undercurl ++syn keyword vimFgBgAttrib contained none bg background fg foreground + syn case match +-syn match vimHiAttribList contained "\i\+" contains=vimHiAttrib +-syn match vimHiAttribList contained "\i\+,"he=e-1 contains=vimHiAttrib nextgroup=vimHiAttribList ++syn match vimHiAttribList contained "\i\+" contains=vimHiAttrib ++syn match vimHiAttribList contained "\i\+,"he=e-1 contains=vimHiAttrib nextgroup=vimHiAttribList + syn case ignore +-syn keyword vimHiCtermColor contained black blue brown cyan darkBlue darkcyan darkgray darkgreen darkgrey darkmagenta darkred darkyellow gray green grey lightblue lightcyan lightgray lightgreen lightgrey lightmagenta lightred magenta red white yellow ++syn keyword vimHiCtermColor contained black blue brown cyan darkBlue darkcyan darkgray darkgreen darkgrey darkmagenta darkred darkyellow gray green grey lightblue lightcyan lightgray lightgreen lightgrey lightmagenta lightred magenta red white yellow + + syn case match +-syn match vimHiFontname contained "[a-zA-Z\-*]\+" +-syn match vimHiGuiFontname contained "'[a-zA-Z\-* ]\+'" +-syn match vimHiGuiRgb contained "#\x\{6}" ++syn match vimHiFontname contained "[a-zA-Z\-*]\+" ++syn match vimHiGuiFontname contained "'[a-zA-Z\-* ]\+'" ++syn match vimHiGuiRgb contained "#\x\{6}" + if !exists("g:vimsyn_noerror") +- syn match vimHiCtermError contained "[^0-9]\i*" ++ syn match vimHiCtermError contained "[^0-9]\i*" + endif + + " Highlighting: hi group key=arg ... {{{2 +-syn cluster vimHiCluster contains=vimHiGroup,vimHiTerm,vimHiCTerm,vimHiStartStop,vimHiCtermFgBg,vimHiGui,vimHiGuiFont,vimHiGuiFgBg,vimHiKeyError,vimNotation +-syn region vimHiKeyList contained oneline start="\i\+" skip="\\\\\|\\|" end="$\||" contains=@vimHiCluster ++syn cluster vimHiCluster contains=vimGroup,vimHiGroup,vimHiTerm,vimHiCTerm,vimHiStartStop,vimHiCtermFgBg,vimHiGui,vimHiGuiFont,vimHiGuiFgBg,vimHiKeyError,vimNotation ++syn region vimHiKeyList contained oneline start="\i\+" skip="\\\\\|\\|" end="$\||" contains=@vimHiCluster + if !exists("g:vimsyn_noerror") +- syn match vimHiKeyError contained "\i\+="he=e-1 ++ syn match vimHiKeyError contained "\i\+="he=e-1 + endif +-syn match vimHiTerm contained "\cterm="he=e-1 nextgroup=vimHiAttribList +-syn match vimHiStartStop contained "\c\(start\|stop\)="he=e-1 nextgroup=vimHiTermcap,vimOption +-syn match vimHiCTerm contained "\ccterm="he=e-1 nextgroup=vimHiAttribList +-syn match vimHiCtermFgBg contained "\ccterm[fb]g="he=e-1 nextgroup=vimNumber,vimHiCtermColor,vimFgBgAttrib,vimHiCtermError +-syn match vimHiGui contained "\cgui="he=e-1 nextgroup=vimHiAttribList +-syn match vimHiGuiFont contained "\cfont="he=e-1 nextgroup=vimHiFontname +-syn match vimHiGuiFgBg contained "\cgui\%([fb]g\|sp\)="he=e-1 nextgroup=vimHiGroup,vimHiGuiFontname,vimHiGuiRgb,vimFgBgAttrib +-syn match vimHiTermcap contained "\S\+" contains=vimNotation ++syn match vimHiTerm contained "\cterm="he=e-1 nextgroup=vimHiAttribList ++syn match vimHiStartStop contained "\c\(start\|stop\)="he=e-1 nextgroup=vimHiTermcap,vimOption ++syn match vimHiCTerm contained "\ccterm="he=e-1 nextgroup=vimHiAttribList ++syn match vimHiCtermFgBg contained "\ccterm[fb]g="he=e-1 nextgroup=vimNumber,vimHiCtermColor,vimFgBgAttrib,vimHiCtermError ++syn match vimHiGui contained "\cgui="he=e-1 nextgroup=vimHiAttribList ++syn match vimHiGuiFont contained "\cfont="he=e-1 nextgroup=vimHiFontname ++syn match vimHiGuiFgBg contained "\cgui\%([fb]g\|sp\)="he=e-1 nextgroup=vimHiGroup,vimHiGuiFontname,vimHiGuiRgb,vimFgBgAttrib ++syn match vimHiTermcap contained "\S\+" contains=vimNotation + + " Highlight: clear {{{2 +-syn keyword vimHiClear contained clear nextgroup=vimHiGroup ++syn keyword vimHiClear contained clear nextgroup=vimHiGroup + + " Highlight: link {{{2 +-syn region vimHiLink contained oneline matchgroup=vimCommand start="\<\(def\s\+\)\=link\>\|\<def\>" end="$" contains=vimHiGroup,vimGroup,vimHLGroup,vimNotation ++syn region vimHiLink contained oneline matchgroup=vimCommand start="\<\(def\s\+\)\=link\>\|\<def\>" end="$" contains=vimHiGroup,vimGroup,vimHLGroup,vimNotation + + " Control Characters {{{2 + " ================== +-syn match vimCtrlChar "[--]" ++syn match vimCtrlChar "[--]" + + " Beginners - Patterns that involve ^ {{{2 + " ========= +-syn match vimLineComment +^[ \t:]*".*$+ contains=@vimCommentGroup,vimCommentString,vimCommentTitle +-syn match vimCommentTitle '"\s*\%([sS]:\|\h\w*#\)\=\u\w*\(\s\+\u\w*\)*:'hs=s+1 contained contains=vimCommentTitleLeader,vimTodo,@vimCommentGroup +-syn match vimContinue "^\s*\\" +-syn region vimString start="^\s*\\\z(['"]\)" skip='\\\\\|\\\z1' end="\z1" oneline keepend contains=@vimStringGroup,vimContinue +-syn match vimCommentTitleLeader '"\s\+'ms=s+1 contained ++syn match vimLineComment +^[ \t:]*".*$+ contains=@vimCommentGroup,vimCommentString,vimCommentTitle ++syn match vimCommentTitle '"\s*\%([sS]:\|\h\w*#\)\=\u\w*\(\s\+\u\w*\)*:'hs=s+1 contained contains=vimCommentTitleLeader,vimTodo,@vimCommentGroup ++syn match vimContinue "^\s*\\" ++syn region vimString start="^\s*\\\z(['"]\)" skip='\\\\\|\\\z1' end="\z1" oneline keepend contains=@vimStringGroup,vimContinue ++syn match vimCommentTitleLeader '"\s\+'ms=s+1 contained + + " Searches And Globals: {{{2 + " ==================== +-syn match vimSearch '^\s*[/?].*' contains=vimSearchDelim +-syn match vimSearchDelim '^\s*\zs[/?]\|[/?]$' contained +-syn region vimGlobal matchgroup=Statement start='\<g\%[lobal]!\=/' skip='\\.' end='/' +-syn region vimGlobal matchgroup=Statement start='\<v\%[global]!\=/' skip='\\.' end='/' ++syn match vimSearch '^\s*[/?].*' contains=vimSearchDelim ++syn match vimSearchDelim '^\s*\zs[/?]\|[/?]$' contained ++syn region vimGlobal matchgroup=Statement start='\<g\%[lobal]!\=/' skip='\\.' end='/' ++syn region vimGlobal matchgroup=Statement start='\<v\%[global]!\=/' skip='\\.' end='/' + + " Scripts : perl,ruby : Benoit Cerrina {{{2 + " ======= python,tcl: Johannes Zellner +@@ -541,94 +543,127 @@ + endif + + " [-- perl --] {{{3 +-if (g:vimsyn_embed =~ 'p' && has("perl")) && filereadable(expand("<sfile>:p:h")."/perl.vim") ++let s:perlpath= expand("<sfile>:p:h")."/perl.vim" ++if !filereadable(s:perlpath) ++ let s:perlpath= globpath(&rtp,"syntax/perl.vim") ++endif ++if (g:vimsyn_embed =~ 'p' && has("perl")) && filereadable(s:perlpath) + unlet! b:current_syntax +- syn include @vimPerlScript <sfile>:p:h/perl.vim ++ exe "syn include @vimPerlScript ".s:perlpath + if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'p' +- syn region vimPerlRegion fold matchgroup=vimScriptDelim start=+pe\%[rl]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimPerlScript +- syn region vimPerlRegion fold matchgroup=vimScriptDelim start=+pe\%[rl]\s*<<\s*$+ end=+\.$+ contains=@vimPerlScript ++ syn region vimPerlRegion fold matchgroup=vimScriptDelim start=+pe\%[rl]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimPerlScript ++ syn region vimPerlRegion fold matchgroup=vimScriptDelim start=+pe\%[rl]\s*<<\s*$+ end=+\.$+ contains=@vimPerlScript + else +- syn region vimPerlRegion matchgroup=vimScriptDelim start=+pe\%[rl]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimPerlScript +- syn region vimPerlRegion matchgroup=vimScriptDelim start=+pe\%[rl]\s*<<\s*$+ end=+\.$+ contains=@vimPerlScript ++ syn region vimPerlRegion matchgroup=vimScriptDelim start=+pe\%[rl]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimPerlScript ++ syn region vimPerlRegion matchgroup=vimScriptDelim start=+pe\%[rl]\s*<<\s*$+ end=+\.$+ contains=@vimPerlScript + endif ++ syn cluster vimFuncBodyList add=vimPerlRegion + else + syn region vimEmbedError start=+pe\%[rl]\s*<<\s*\z(.*\)$+ end=+^\z1$+ + syn region vimEmbedError start=+pe\%[rl]\s*<<\s*$+ end=+\.$+ + endif ++unlet s:perlpath + + " [-- ruby --] {{{3 +-if (g:vimsyn_embed =~ 'r' && has("ruby")) && filereadable(expand("<sfile>:p:h")."/ruby.vim") ++let s:rubypath= expand("<sfile>:p:h")."/ruby.vim" ++if !filereadable(s:rubypath) ++ let s:rubypath= globpath(&rtp,"syntax/ruby.vim") ++endif ++if (g:vimsyn_embed =~ 'r' && has("ruby")) && filereadable(s:rubypath) + unlet! b:current_syntax +- syn include @vimRubyScript <sfile>:p:h/ruby.vim ++ exe "syn include @vimRubyScript ".s:rubypath + if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'r' +- syn region vimRubyRegion fold matchgroup=vimScriptDelim start=+rub[y]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimRubyScript ++ syn region vimRubyRegion fold matchgroup=vimScriptDelim start=+rub[y]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimRubyScript + else +- syn region vimRubyRegion matchgroup=vimScriptDelim start=+rub[y]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimRubyScript ++ syn region vimRubyRegion matchgroup=vimScriptDelim start=+rub[y]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimRubyScript + endif +- syn region vimRubyRegion matchgroup=vimScriptDelim start=+rub[y]\s*<<\s*$+ end=+\.$+ contains=@vimRubyScript ++ syn region vimRubyRegion matchgroup=vimScriptDelim start=+rub[y]\s*<<\s*$+ end=+\.$+ contains=@vimRubyScript ++ syn cluster vimFuncBodyList add=vimRubyRegion + else + syn region vimEmbedError start=+rub[y]\s*<<\s*\z(.*\)$+ end=+^\z1$+ + syn region vimEmbedError start=+rub[y]\s*<<\s*$+ end=+\.$+ + endif ++unlet s:rubypath + + " [-- python --] {{{3 +-if (g:vimsyn_embed =~ 'P' && has("python")) && filereadable(expand("<sfile>:p:h")."/python.vim") ++let s:pythonpath= expand("<sfile>:p:h")."/python.vim" ++if !filereadable(s:pythonpath) ++ let s:pythonpath= globpath(&rtp,"syntax/python.vim") ++endif ++if (g:vimsyn_embed =~ 'P' && has("python")) && filereadable(s:pythonpath) + unlet! b:current_syntax +- syn include @vimPythonScript <sfile>:p:h/python.vim ++ exe "syn include @vimPythonScript ".s:pythonpath + if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'P' +- syn region vimPythonRegion fold matchgroup=vimScriptDelim start=+py\%[thon]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimPythonScript +- syn region vimPythonRegion fold matchgroup=vimScriptDelim start=+py\%[thon]\s*<<\s*$+ end=+\.$+ contains=@vimPythonScript ++ syn region vimPythonRegion fold matchgroup=vimScriptDelim start=+py\%[thon]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimPythonScript ++ syn region vimPythonRegion fold matchgroup=vimScriptDelim start=+py\%[thon]\s*<<\s*$+ end=+\.$+ contains=@vimPythonScript + else +- syn region vimPythonRegion matchgroup=vimScriptDelim start=+py\%[thon]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimPythonScript +- syn region vimPythonRegion matchgroup=vimScriptDelim start=+py\%[thon]\s*<<\s*$+ end=+\.$+ contains=@vimPythonScript ++ syn region vimPythonRegion matchgroup=vimScriptDelim start=+py\%[thon]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimPythonScript ++ syn region vimPythonRegion matchgroup=vimScriptDelim start=+py\%[thon]\s*<<\s*$+ end=+\.$+ contains=@vimPythonScript + endif ++ syn cluster vimFuncBodyList add=vimPythonRegion + else + syn region vimEmbedError start=+py\%[thon]\s*<<\s*\z(.*\)$+ end=+^\z1$+ + syn region vimEmbedError start=+py\%[thon]\s*<<\s*$+ end=+\.$+ + endif ++unlet s:pythonpath + + " [-- tcl --] {{{3 + if has("win32") || has("win95") || has("win64") || has("win16") + " apparently has("tcl") has been hanging vim on some windows systems with cygwin +- let trytcl= (&shell !~ '\<\%(bash\>\|4[nN][tT]\|\<zsh\)\>\%(\.exe\)\=$') ++ let s:trytcl= (&shell !~ '\<\%(bash\>\|4[nN][tT]\|\<zsh\)\>\%(\.exe\)\=$') + else +- let trytcl= 1 ++ let s:trytcl= 1 + endif +-if trytcl +- if (g:vimsyn_embed =~ 't' && has("tcl")) && filereadable(expand("<sfile>:p:h")."/tcl.vim") ++if s:trytcl ++ let s:tclpath= expand("<sfile>:p:h")."/tcl.vim" ++ if !filereadable(s:tclpath) ++ let s:tclpath= globpath(&rtp,"syntax/tcl.vim") ++ endif ++ if (g:vimsyn_embed =~ 't' && has("tcl")) && filereadable(s:tclpath) + unlet! b:current_syntax +- syn include @vimTclScript <sfile>:p:h/tcl.vim ++ exe "syn include @vimTclScript ".s:tclpath + if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 't' +- syn region vimTclRegion fold matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimTclScript +- syn region vimTclRegion fold matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*$+ end=+\.$+ contains=@vimTclScript ++ syn region vimTclRegion fold matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimTclScript ++ syn region vimTclRegion fold matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*$+ end=+\.$+ contains=@vimTclScript + else +- syn region vimTclRegion matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimTclScript +- syn region vimTclRegion matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*$+ end=+\.$+ contains=@vimTclScript ++ syn region vimTclRegion matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimTclScript ++ syn region vimTclRegion matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*$+ end=+\.$+ contains=@vimTclScript + endif ++ syn cluster vimFuncBodyList add=vimTclScript ++ else ++ syn region vimEmbedError start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ ++ syn region vimEmbedError start=+tc[l]\=\s*<<\s*$+ end=+\.$+ + endif ++ unlet s:tclpath + else + syn region vimEmbedError start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ + syn region vimEmbedError start=+tc[l]\=\s*<<\s*$+ end=+\.$+ + endif +-unlet trytcl ++unlet s:trytcl + + " [-- mzscheme --] {{{3 +-if (g:vimsyn_embed =~ 'm' && has("mzscheme")) && filereadable(expand("<sfile>:p:h")."/scheme.vim") ++let s:mzschemepath= expand("<sfile>:p:h")."/scheme.vim" ++if !filereadable(s:mzschemepath) ++ let s:mzschemepath= globpath(&rtp,"syntax/scheme.vim") ++endif ++if (g:vimsyn_embed =~ 'm' && has("mzscheme")) && filereadable(s:mzschemepath) + unlet! b:current_syntax + let iskKeep= &isk +- syn include @vimMzSchemeScript <sfile>:p:h/scheme.vim ++ exe "syn include @vimMzSchemeScript ".s:mzschemepath + let &isk= iskKeep + if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'm' +- syn region vimMzSchemeRegion fold matchgroup=vimScriptDelim start=+mz\%[scheme]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimMzSchemeScript +- syn region vimMzSchemeRegion fold matchgroup=vimScriptDelim start=+mz\%[scheme]\s*<<\s*$+ end=+\.$+ contains=@vimMzSchemeScript ++ syn region vimMzSchemeRegion fold matchgroup=vimScriptDelim start=+mz\%[scheme]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimMzSchemeScript ++ syn region vimMzSchemeRegion fold matchgroup=vimScriptDelim start=+mz\%[scheme]\s*<<\s*$+ end=+\.$+ contains=@vimMzSchemeScript + else +- syn region vimMzSchemeRegion matchgroup=vimScriptDelim start=+mz\%[scheme]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimMzSchemeScript +- syn region vimMzSchemeRegion matchgroup=vimScriptDelim start=+mz\%[scheme]\s*<<\s*$+ end=+\.$+ contains=@vimMzSchemeScript ++ syn region vimMzSchemeRegion matchgroup=vimScriptDelim start=+mz\%[scheme]\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimMzSchemeScript ++ syn region vimMzSchemeRegion matchgroup=vimScriptDelim start=+mz\%[scheme]\s*<<\s*$+ end=+\.$+ contains=@vimMzSchemeScript + endif ++ syn cluster vimFuncBodyList add=vimMzSchemeRegion + else + syn region vimEmbedError start=+mz\%[scheme]\s*<<\s*\z(.*\)$+ end=+^\z1$+ + syn region vimEmbedError start=+mz\%[scheme]\s*<<\s*$+ end=+\.$+ + endif ++unlet s:mzschemepath + + " Synchronize (speed) {{{2 + "============ +@@ -643,6 +678,7 @@ + syn sync linecont "^\s\+\\" + syn sync match vimAugroupSyncA groupthere NONE "\<aug\%[roup]\>\s\+[eE][nN][dD]" + ++" ==================== + " Highlighting Settings {{{2 + " ==================== + +@@ -709,15 +745,15 @@ + hi def link vimMenuNameMore vimMenuName + hi def link vimMtchComment vimComment + hi def link vimNorm vimCommand ++hi def link vimNotFunc vimCommand + hi def link vimNotPatSep vimString +-hi def link vimPatSepR vimPatSep +-hi def link vimPatSepZ vimPatSep + hi def link vimPatSepErr vimPatSep ++hi def link vimPatSepR vimPatSep + hi def link vimPatSepZone vimString ++hi def link vimPatSepZ vimPatSep + hi def link vimPlainMark vimMark + hi def link vimPlainRegister vimRegister + hi def link vimSearch vimString +-hi def link vimSearchDelim Statement + hi def link vimSetMod vimOption + hi def link vimSetString vimString + hi def link vimSpecFileMod vimSpecFile +@@ -738,11 +774,11 @@ + hi def link vimSynRegPat vimString + hi def link vimSyntax vimCommand + hi def link vimSynType vimSpecial ++hi def link vimUnmap vimMap + hi def link vimUserAttrbCmplt vimSpecial + hi def link vimUserAttrbKey vimOption + hi def link vimUserAttrb vimSpecial + hi def link vimUserCommand vimCommand +-hi def link vimUserFunc Normal + + hi def link vimAutoEvent Type + hi def link vimBracket Delimiter +@@ -759,24 +795,25 @@ + hi def link vimFuncName Function + hi def link vimFuncSID Special + hi def link vimFuncVar Identifier +-hi def link vimGroup Type + hi def link vimGroupSpecial Special +-hi def link vimHLMod PreProc ++hi def link vimGroup Type + hi def link vimHiAttrib PreProc + hi def link vimHiTerm Type ++hi def link vimHLMod PreProc + hi def link vimKeyword Statement + hi def link vimMark Number + hi def link vimMenuName PreProc + hi def link vimNotation Special +-hi def link vimNotFunc vimCommand + hi def link vimNumber Number ++hi def link vimOperError Error + hi def link vimOper Operator + hi def link vimOption PreProc +-hi def link vimOperError Error ++hi def link vimParenSep Delimiter + hi def link vimPatSep SpecialChar + hi def link vimPattern Type + hi def link vimRegister SpecialChar + hi def link vimScriptDelim Comment ++hi def link vimSearchDelim Statement + hi def link vimSep Delimiter + hi def link vimSetSep Statement + hi def link vimSpecFile Identifier +@@ -786,18 +823,19 @@ + hi def link vimSubstDelim Delimiter + hi def link vimSubstFlags Special + hi def link vimSubstSubstr SpecialChar +-hi def link vimSynCase Type + hi def link vimSynCaseError Error +-hi def link vimSynError Error +-hi def link vimSynOption Special +-hi def link vimSynReg Type ++hi def link vimSynCase Type + hi def link vimSyncC Type + hi def link vimSyncError Error + hi def link vimSyncKey Type + hi def link vimSyncNone Type ++hi def link vimSynError Error ++hi def link vimSynOption Special ++hi def link vimSynReg Type + hi def link vimTodo Todo +-hi def link vimUserCmdError Error + hi def link vimUserAttrbCmpltFunc Special ++hi def link vimUserCmdError Error ++hi def link vimUserFunc Normal + hi def link vimWarn WarningMsg + + " Current Syntax Variable: {{{2 +diff -u -r --new-file runtime/syntax.orig/xml.vim runtime/syntax/xml.vim +--- runtime/syntax.orig/xml.vim 2006-04-11 16:32:00.000000000 -0500 ++++ runtime/syntax/xml.vim 2009-07-26 06:44:44.000000000 -0500 +@@ -3,7 +3,7 @@ + " Maintainer: Johannes Zellner <johannes@zellner.org> + " Author and previous maintainer: + " Paul Siegmann <pauls@euronet.nl> +-" Last Change: Mi, 13 Apr 2005 22:40:09 CEST ++" Last Change: 2009-07-13 21:26:55 + " Filenames: *.xml + " $Id: xml.vim,v 1.3 2006/04/11 21:32:00 vimboss Exp $ + +@@ -216,7 +216,7 @@ + syn region xmlComment + \ start=+<!+ + \ end=+>+ +- \ contains=xmlCommentPart,xmlCommentError ++ \ contains=xmlCommentStart,xmlCommentError + \ extend + \ fold + +@@ -228,11 +228,12 @@ + syn region xmlComment + \ start=+<!+ + \ end=+>+ +- \ contains=xmlCommentPart,xmlCommentError ++ \ contains=xmlCommentStart,xmlCommentError + \ extend + + endif + ++syn match xmlCommentStart contained "<!" nextgroup=xmlCommentPart + syn keyword xmlTodo contained TODO FIXME XXX + syn match xmlCommentError contained "[^><!]" + syn region xmlCommentPart +@@ -320,6 +321,7 @@ + + hi def link xmlString String + hi def link xmlComment Comment ++hi def link xmlCommentStart xmlComment + hi def link xmlCommentPart Comment + hi def link xmlCommentError Error + hi def link xmlError Error +diff -u -r --new-file runtime/syntax.orig/yacc.vim runtime/syntax/yacc.vim +--- runtime/syntax.orig/yacc.vim 2008-03-03 14:33:51.000000000 -0600 ++++ runtime/syntax/yacc.vim 2008-12-08 15:08:36.000000000 -0600 +@@ -1,95 +1,85 @@ + " Vim syntax file + " Language: Yacc + " Maintainer: Charles E. Campbell, Jr. <NdrOchipS@PcampbellAfamily.Mbiz> +-" Last Change: Jan 09, 2008 +-" Version: 5 ++" Last Change: Oct 21, 2008 ++" Version: 7 + " URL: http://mysite.verizon.net/astronaut/vim/index.html#vimlinks_syntax + " + " Options: {{{1 + " g:yacc_uses_cpp : if this variable exists, then C++ is loaded rather than C +-" g:yacc_minlines : see :help :he syn-sync-minlines -- default 50 +-" g:yacc_maxlines : see :help :he syn-sync-maxlines -- default 200 + + " --------------------------------------------------------------------- +-" For version 5.x: Clear all syntax items {{{1 +-" For version 6.x: Quit when a syntax file was already loaded ++" this version of syntax/yacc.vim requires 6.0 or later + if version < 600 +- syntax clear +-elseif exists("b:current_syntax") +- finish ++ finish ++endif ++if exists("b:current_syntax") ++ syntax clear ++endif ++ ++" --------------------------------------------------------------------- ++" Folding Support {{{1 ++if has("folding") ++ com! -nargs=+ HiFold <args> fold ++else ++ com! -nargs=+ HiFold <args> + endif + + " --------------------------------------------------------------------- + " Read the C syntax to start with {{{1 +-if version >= 600 +- if exists("g:yacc_uses_cpp") +- runtime! syntax/cpp.vim +- else +- runtime! syntax/c.vim +- endif +-elseif exists("g:yacc_uses_cpp") +- so <sfile>:p:h/cpp.vim ++if exists("g:yacc_uses_cpp") ++ syn include @yaccCode <sfile>:p:h/cpp.vim + else +- so <sfile>:p:h/c.vim ++ syn include @yaccCode <sfile>:p:h/c.vim + endif + + " --------------------------------------------------------------------- +-" Clusters {{{1 +-syn cluster yaccActionGroup contains=yaccDelim,cInParen,cTodo,cIncluded,yaccDelim,yaccCurlyError,yaccUnionCurly,yaccUnion,cUserLabel,cOctalZero,cCppOut2,cCppSkip,cErrInBracket,cErrInParen,cOctalError,cCommentStartError,cParenError +-syn cluster yaccUnionGroup contains=yaccKey,cComment,yaccCurly,cType,cStructure,cStorageClass,yaccUnionCurly +- +-" --------------------------------------------------------------------- +-" Yacc stuff {{{1 +-syn match yaccDelim "^\s*[:|;]" +-syn match yaccOper "@\d\+" +- +-syn match yaccKey "^\s*%\(token\|type\|left\|right\|start\|ident\|nonassoc\)\>" +-syn match yaccKey "\s%\(prec\|expect\)\>" +-syn match yaccKey "\$\(<[a-zA-Z_][a-zA-Z_0-9]*>\)\=[\$0-9]\+" +-syn keyword yaccKeyActn yyerrok yyclearin +- +-syn match yaccUnionStart "^%union" skipwhite skipnl nextgroup=yaccUnion +-syn region yaccUnion contained matchgroup=yaccCurly start="{" matchgroup=yaccCurly end="}" contains=@yaccUnionGroup +-syn region yaccUnionCurly contained matchgroup=yaccCurly start="{" matchgroup=yaccCurly end="}" contains=@yaccUnionGroup +-syn match yaccBrkt contained "[<>]" +-syn match yaccType "<[a-zA-Z_][a-zA-Z0-9_]*>" contains=yaccBrkt +-syn match yaccDefinition "^[A-Za-z][A-Za-z0-9_]*\_s*:" +- +-" --------------------------------------------------------------------- +-" special Yacc separators {{{1 +-syn match yaccSectionSep "^[ \t]*%%" +-syn match yaccSep "^[ \t]*%{" +-syn match yaccSep "^[ \t]*%}" ++" Yacc Clusters: {{{1 ++syn cluster yaccInitCluster contains=yaccKey,yaccKeyActn,yaccBrkt,yaccType,yaccString,yaccUnionStart,yaccHeader2,yaccComment ++syn cluster yaccRulesCluster contains=yaccNonterminal,yaccString ++ ++" --------------------------------------------------------------------- ++" Yacc Sections: {{{1 ++HiFold syn region yaccInit start='.'ms=s-1,rs=s-1 matchgroup=yaccSectionSep end='^%%$'me=e-2,re=e-2 contains=@yaccInitCluster nextgroup=yaccRules skipwhite skipempty contained ++HiFold syn region yaccInit2 start='\%^.'ms=s-1,rs=s-1 matchgroup=yaccSectionSep end='^%%$'me=e-2,re=e-2 contains=@yaccInitCluster nextgroup=yaccRules skipwhite skipempty ++HiFold syn region yaccHeader2 matchgroup=yaccSep start="^\s*\zs%{" end="^\s*%}" contains=@yaccCode nextgroup=yaccInit skipwhite skipempty contained ++HiFold syn region yaccHeader matchgroup=yaccSep start="^\s*\zs%{" end="^\s*%}" contains=@yaccCode nextgroup=yaccInit skipwhite skipempty ++HiFold syn region yaccRules matchgroup=yaccSectionSep start='^%%$' end='^%%$'me=e-2,re=e-2 contains=@yaccRulesCluster nextgroup=yaccEndCode skipwhite skipempty contained ++HiFold syn region yaccEndCode matchgroup=yaccSectionSep start='^%%$' end='\%$' contains=@yaccCode contained ++ ++" --------------------------------------------------------------------- ++" Yacc Commands: {{{1 ++syn match yaccDelim "[:|]" contained ++syn match yaccOper "@\d\+" contained ++ ++syn match yaccKey "^\s*%\(token\|type\|left\|right\|start\|ident\|nonassoc\)\>" contained ++syn match yaccKey "\s%\(prec\|expect\)\>" contained ++syn match yaccKey "\$\(<[a-zA-Z_][a-zA-Z_0-9]*>\)\=[\$0-9]\+" contained ++syn keyword yaccKeyActn yyerrok yyclearin contained ++ ++syn match yaccUnionStart "^%union" skipwhite skipnl nextgroup=yaccUnion contained ++HiFold syn region yaccUnion matchgroup=yaccCurly start="{" matchgroup=yaccCurly end="}" contains=@yaccCode contained ++syn match yaccBrkt "[<>]" contained ++syn match yaccType "<[a-zA-Z_][a-zA-Z0-9_]*>" contains=yaccBrkt contained ++ ++HiFold syn region yaccNonterminal start="^\s*\a\w*\ze\_s*\(/\*\_.\{-}\*/\)\=\_s*:" matchgroup=yaccDelim end=";" matchgroup=yaccSectionSep end='^%%$'me=e-2,re=e-2 contains=yaccAction,yaccDelim,yaccString,yaccComment contained ++syn region yaccComment start="/\*" end="\*/" ++syn match yaccString "'[^']*'" contained ++ + + " --------------------------------------------------------------------- + " I'd really like to highlight just the outer {}. Any suggestions??? {{{1 +-syn match yaccCurlyError "[{}]" +-syn region yaccAction matchgroup=yaccCurly start="{" end="}" contains=ALLBUT,@yaccActionGroup ++syn match yaccCurlyError "[{}]" ++HiFold syn region yaccAction matchgroup=yaccCurly start="{" end="}" contains=@yaccCode contained + + " --------------------------------------------------------------------- + " Yacc synchronization: {{{1 +-if exists("g:yacc_maxlines") +- exe "syn sync maxlines=".g:yacc_maxlines +-else +- syn sync maxlines=200 +-endif +-if exists("g:yacc_minlines") +- exe "syn sync minlines=".g:yacc_minlines +-else +- syn sync minlines=50 +-endif ++syn sync fromstart + + " --------------------------------------------------------------------- + " Define the default highlighting. {{{1 +-" For version 5.7 and earlier: only when not done already +-" For version 5.8 and later: only when an item doesn't have highlighting yet +-if version >= 508 || !exists("did_yacc_syn_inits") +- if version < 508 +- let did_yacchdl_syn_inits = 1 +- command -nargs=+ HiLink hi link <args> +- else +- command -nargs=+ HiLink hi def link <args> +- endif ++if !exists("did_yacc_syn_inits") ++ command -nargs=+ HiLink hi def link <args> + + " Internal yacc highlighting links {{{2 + HiLink yaccBrkt yaccStmt +@@ -98,13 +88,15 @@ + HiLink yaccUnionStart yaccKey + + " External yacc highlighting links {{{2 ++ HiLink yaccComment Comment + HiLink yaccCurly Delimiter + HiLink yaccCurlyError Error +- HiLink yaccDefinition Function +- HiLink yaccDelim Function ++ HiLink yaccNonterminal Function ++ HiLink yaccDelim Delimiter + HiLink yaccKeyActn Special + HiLink yaccSectionSep Todo + HiLink yaccSep Delimiter ++ HiLink yaccString String + HiLink yaccStmt Statement + HiLink yaccType Type + +@@ -113,6 +105,10 @@ + + delcommand HiLink + endif ++ ++" --------------------------------------------------------------------- ++" Cleanup: {{{1 ++delcommand HiFold + let b:current_syntax = "yacc" + + " --------------------------------------------------------------------- +diff -u -r --new-file runtime/syntax.orig/zsh.vim runtime/syntax/zsh.vim +--- runtime/syntax.orig/zsh.vim 2008-07-18 09:48:32.000000000 -0500 ++++ runtime/syntax/zsh.vim 2010-02-11 06:45:15.000000000 -0600 +@@ -1,7 +1,7 @@ + " Vim syntax file + " Language: Zsh shell script + " Maintainer: Nikolai Weibull <now@bitwi.se> +-" Latest Revision: 2008-07-17 ++" Latest Revision: 2010-01-23 + + if exists("b:current_syntax") + finish +@@ -14,7 +14,7 @@ + + syn keyword zshTodo contained TODO FIXME XXX NOTE + +-syn region zshComment display oneline start='\%(^\|\s\)#' end='$' ++syn region zshComment oneline start='\%(^\|\s\)#' end='$' + \ contains=zshTodo,@Spell + + syn match zshPreProc '^\%1l#\%(!\|compdef\|autoload\).*$' diff --git a/source/ap/vim/vim.SlackBuild b/source/ap/vim/vim.SlackBuild index 460b07a1e..15904bcdd 100755 --- a/source/ap/vim/vim.SlackBuild +++ b/source/ap/vim/vim.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,10 +24,20 @@ VIMVER=7.2 CTAGSVER=5.7 # This is the directory in the VIM source archive to cd into. DIRVER=72 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + PYVER=$(python -V 2>&1 | cut -f 2 -d' ' | cut -f 1-2 -d.) if [ "$ARCH" = "x86_64" ]; then @@ -109,6 +119,21 @@ CFLAGS="$SLKCFLAGS" \ } cd $TMP/vim$DIRVER + +# If there's no syntax update, create one: +if ! ls $CWD/vim-runtime-syntax-* 1> /dev/null 2> /dev/null ; then + rm -rf runtime/syntax.orig + cp -a runtime/syntax runtime/syntax.orig + echo "Fetching vim syntax updates from ftp.nluug.nl..." + rsync -avzcP ftp.nluug.nl::Vim/runtime/syntax/ runtime/syntax/ + diff -u -r --new-file runtime/syntax.orig runtime/syntax | gzip -9c > $CWD/vim-runtime-syntax-$(date +%Y%m%d).diff.gz + rm -rf runtime/syntax + mv runtime/syntax.orig runtime/syntax +fi + +# Apply the syntax update: +zcat $CWD/vim-runtime-syntax-*.diff.gz | patch -p0 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/ap/xfsdump/xfsdump.SlackBuild b/source/ap/xfsdump/xfsdump.SlackBuild index 378d46de2..f293b6a38 100755 --- a/source/ap/xfsdump/xfsdump.SlackBuild +++ b/source/ap/xfsdump/xfsdump.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.0.1 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo xfsdump-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-xfsdump @@ -54,7 +63,7 @@ autoconf ./configure \ --prefix=/usr \ - --sbindir=/sbin \ + --sbindir=/usr/sbin \ --bindir=/usr/sbin \ --enable-gettext=yes \ --mandir=/usr/man \ @@ -99,6 +108,16 @@ mkdir -p $PKG/usr/doc/xfsdump-$VERSION/html cp -a *.gif *.html $PKG/usr/doc/xfsdump-$VERSION/html ) +rm -f $PKG/usr/doc/xfsdump-$VERSION/CHANGES.gz + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r doc/CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat doc/CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r doc/CHANGES $DOCSDIR/CHANGES +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/ap/xfsdump/xfsdump.destdir.diff b/source/ap/xfsdump/xfsdump.destdir.diff index 1772465dc..a42bb3a20 100644 --- a/source/ap/xfsdump/xfsdump.destdir.diff +++ b/source/ap/xfsdump/xfsdump.destdir.diff @@ -1,32 +1,19 @@ ---- ./include/buildmacros.orig 2007-09-10 21:01:12.000000000 -0500 -+++ ./include/buildmacros 2008-04-01 00:06:53.000000000 -0500 -@@ -27,7 +27,7 @@ - $(LFILES:.l=.o) \ - $(YFILES:%.y=%.tab.o) - --INSTALL = $(TOPDIR)/install-sh -o $(PKG_USER) -g $(PKG_GROUP) -+INSTALL = $(TOPDIR)/install-sh +--- ./include/builddefs.in.orig 2010-01-12 19:53:18.000000000 -0600 ++++ ./include/builddefs.in 2010-02-09 15:17:24.000000000 -0600 +@@ -32,13 +32,13 @@ + datarootdir = @datarootdir@ + top_builddir = @top_builddir@ - SHELL = /bin/sh - IMAGES_DIR = $(TOPDIR)/all-images ---- ./include/builddefs.in.orig 2007-09-10 21:01:12.000000000 -0500 -+++ ./include/builddefs.in 2008-04-01 00:06:53.000000000 -0500 -@@ -30,14 +30,14 @@ - PKG_VERSION = @pkg_version@ - PKG_PLATFORM = @pkg_platform@ - PKG_DISTRIBUTION= @pkg_distribution@ --PKG_BIN_DIR = @bindir@ -PKG_SBIN_DIR = @sbindir@ --PKG_LIB_DIR = @libdir@@libdirsuffix@ --PKG_DEVLIB_DIR = @libexecdir@@libdirsuffix@ +-PKG_ROOT_SBIN_DIR = @root_sbindir@ +-PKG_ROOT_LIB_DIR= @root_libdir@@libdirsuffix@ -PKG_INC_DIR = @includedir@ -PKG_MAN_DIR = @mandir@ -PKG_DOC_DIR = @datadir@/doc/@pkg_name@ -PKG_LOCALE_DIR = @datadir@/locale -+PKG_BIN_DIR = $(DESTDIR)@bindir@ +PKG_SBIN_DIR = $(DESTDIR)@sbindir@ -+PKG_LIB_DIR = $(DESTDIR)@libdir@@libdirsuffix@ -+PKG_DEVLIB_DIR = $(DESTDIR)@libexecdir@@libdirsuffix@ ++PKG_ROOT_SBIN_DIR = $(DESTDIR)@root_sbindir@ ++PKG_ROOT_LIB_DIR= $(DESTDIR)@root_libdir@@libdirsuffix@ +PKG_INC_DIR = $(DESTDIR)@includedir@ +PKG_MAN_DIR = $(DESTDIR)@mandir@ +PKG_DOC_DIR = $(DESTDIR)@datadir@/doc/@pkg_name@ @@ -34,3 +21,14 @@ CC = @cc@ AWK = @awk@ +--- ./include/buildmacros.orig 2010-01-12 19:53:18.000000000 -0600 ++++ ./include/buildmacros 2010-02-09 15:15:47.000000000 -0600 +@@ -30,7 +30,7 @@ + $(LFILES:.l=.o) \ + $(YFILES:%.y=%.tab.o) + +-INSTALL = $(TOPDIR)/install-sh -o $(PKG_USER) -g $(PKG_GROUP) ++INSTALL = $(TOPDIR)/install-sh + + SHELL = /bin/sh + IMAGES_DIR = $(TOPDIR)/all-images diff --git a/source/d/autoconf/autoconf.SlackBuild b/source/d/autoconf/autoconf.SlackBuild index 41dbfe9ea..7ed33f754 100755 --- a/source/d/autoconf/autoconf.SlackBuild +++ b/source/d/autoconf/autoconf.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.63 -ARCH=noarch -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=2.65 BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Note: the package is _built_ as 'noarch' + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-autoconf @@ -35,7 +47,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf autoconf-$VERSION -tar xvf $CWD/autoconf-$VERSION.tar.?z* || exit 1 +tar xvf $CWD/autoconf-$VERSION.tar.xz || exit 1 cd autoconf-$VERSION chown -R root:root . find . \ @@ -47,7 +59,8 @@ find . \ ./configure \ --prefix=/usr \ --infodir=/usr/info \ - --mandir=/usr/man + --mandir=/usr/man \ + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -66,5 +79,5 @@ zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/autoconf-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/autoconf-$VERSION-noarch-$BUILD.txz diff --git a/source/d/automake/automake.SlackBuild b/source/d/automake/automake.SlackBuild index c105dfeba..b7ef13c6b 100755 --- a/source/d/automake/automake.SlackBuild +++ b/source/d/automake/automake.SlackBuild @@ -21,11 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.10.1 -ARCH=${ARCH:-x86_64} # note: the package is _built_ as 'noarch' +VERSION=1.11.1 NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-1} +# Note: the package is _built_ as 'noarch' +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-automake @@ -46,6 +55,7 @@ find . \ ./configure \ --prefix=/usr \ + --mandir=/usr/man \ --infodir=/usr/info \ --build=$ARCH-slackware-linux diff --git a/source/d/binutils/binutils-2.20.51.0.8.tar.sign b/source/d/binutils/binutils-2.20.51.0.8.tar.sign new file mode 100644 index 000000000..321434264 --- /dev/null +++ b/source/d/binutils/binutils-2.20.51.0.8.tar.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLxPBQyGugalF9Dw4RAq+mAKCJbsksL4Hlb/tH9dL7kTbFE/BO8QCfXStv +0oOljJ/jyU8Z8SlaEywyfys= +=qMqR +-----END PGP SIGNATURE----- diff --git a/source/d/binutils/binutils.SlackBuild b/source/d/binutils/binutils.SlackBuild index c83c29215..b0ffefb6e 100755 --- a/source/d/binutils/binutils.SlackBuild +++ b/source/d/binutils/binutils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,14 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.18.50.0.9 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +PKGNAM=binutils +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-binutils +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -41,13 +48,18 @@ elif [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" fi +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-binutils + rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf binutils-$VERSION -tar xvf $CWD/binutils-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/binutils-$VERSION.tar.?z* || exit 1 cd binutils-$VERSION + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -60,6 +72,8 @@ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --infodir=/usr/info \ --with-docdir=/usr/doc/binutils-$VERSION \ --enable-shared \ --enable-multilib \ @@ -110,6 +124,15 @@ cp \ $CWD/release.binutils-* \ COPYING* ChangeLog.linux MAI* README* \ $PKG/usr/doc/binutils-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + chown -R root:root $PKG/usr/doc/binutils-$VERSION # Add slack-desc: diff --git a/source/d/binutils/release.binutils-2.18.50.0.9 b/source/d/binutils/release.binutils-2.18.50.0.9 deleted file mode 100644 index ecae5c083..000000000 --- a/source/d/binutils/release.binutils-2.18.50.0.9 +++ /dev/null @@ -1,1028 +0,0 @@ -This is the beta release of binutils 2.18.50.0.9 for Linux, which is -based on binutils 2008 0822 in CVS on sourceware.org plus various -changes. It is purely for Linux. - -All relevant patches in patches have been applied to the source tree. -You can take a look at patches/README to see what have been applied and -in what order they have been applied. - -Starting from the 2.18.50.0.4 release, the x86 assembler no longer -accepts - - fnstsw %eax - -fnstsw stores 16bit into %ax and the upper 16bit of %eax is unchanged. -Please use - - fnstsw %ax - -Starting from the 2.17.50.0.4 release, the default output section LMA -(load memory address) has changed for allocatable sections from being -equal to VMA (virtual memory address), to keeping the difference between -LMA and VMA the same as the previous output section in the same region. - -For - -.data.init_task : { *(.data.init_task) } - -LMA of .data.init_task section is equal to its VMA with the old linker. -With the new linker, it depends on the previous output section. You -can use - -.data.init_task : AT (ADDR(.data.init_task)) { *(.data.init_task) } - -to ensure that LMA of .data.init_task section is always equal to its -VMA. The linker script in the older 2.6 x86-64 kernel depends on the -old behavior. You can add AT (ADDR(section)) to force LMA of -.data.init_task section equal to its VMA. It will work with both old -and new linkers. The x86-64 kernel linker script in kernel 2.6.13 and -above is OK. - -The new x86_64 assembler no longer accepts - - monitor %eax,%ecx,%edx - -You should use - - monitor %rax,%ecx,%edx - -or - monitor - -which works with both old and new x86_64 assemblers. They should -generate the same opcode. - -The new i386/x86_64 assemblers no longer accept instructions for moving -between a segment register and a 32bit memory location, i.e., - - movl (%eax),%ds - movl %ds,(%eax) - -To generate instructions for moving between a segment register and a -16bit memory location without the 16bit operand size prefix, 0x66, - - mov (%eax),%ds - mov %ds,(%eax) - -should be used. It will work with both new and old assemblers. The -assembler starting from 2.16.90.0.1 will also support - - movw (%eax),%ds - movw %ds,(%eax) - -without the 0x66 prefix. Patches for 2.4 and 2.6 Linux kernels are -available at - -http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch -http://www.kernel.org/pub/linux/devel/binutils/linux-2.6-seg-5.patch - -The ia64 assembler is now defaulted to tune for Itanium 2 processors. -To build a kernel for Itanium 1 processors, you will need to add - -ifeq ($(CONFIG_ITANIUM),y) - CFLAGS += -Wa,-mtune=itanium1 - AFLAGS += -Wa,-mtune=itanium1 -endif - -to arch/ia64/Makefile in your kernel source tree. - -Please report any bugs related to binutils 2.18.50.0.9 to -hjl.tools@gmail.com - -and - -http://www.sourceware.org/bugzilla/ - -Changes from binutils 2.18.50.0.8: - -1. Update from binutils 2008 0822. -2. Add Intel AES+AVX support. -3. Add syscall and sysret for Cpu64 in x86 assembler. -4. Fix i386/x86-64 TLS 2 support. -5. Disable gas generated debug info when compiler generates it. PR -gas/6656. -6. Fix an assembler .set bug. PR 6848. -7. Remove 2MB section gap from linker output. PR ld/6833. -8. Fix stab warnings caused linker errors. PR 6478. -9. Remove AVX registers from DWARF register map. -10. Fix linking Linux .o against FreeBSD .so. PR 4424. -11. Fix objcopy --extract-symbol. PR 6774. -12. Improve gold. -13. Improve mips GOT and non-PIC support. -14. Fix various arms bugs. -15. Fix various bfin bugs. -16. Fix various frv bugs. -17. Fix various h8300 bugs. -18. Fix various ppc bugs. -19. Fix various spu bugs. -20. Fix various xtensa bugs. - -Changes from binutils 2.18.50.0.7: - -1. Update from binutils 2008 0709. -2. Allow vmovd with 64bit operand in x86 assembler. -3. Improve -msse-check in x86 assembler. -4. Fix an AVX assembler bug in Intel syntax. PR 6517. -5. Improve error message in Intel syntax for x86 assembler. PR 6518. -6. Add the ".sse_check" directive to x86 assembler. -7. Improve gold. -8. Improve objcopy/strip. PR 2995/6473. -9. Improve objdump -g. PR 6483. -10. Improve ld --sort-common. PR 6430. -11. Add multi-GOT support for m68k. -12. Fix various arm bugs. -13. Fix various avr bugs. -14. Fix various hppa bugs. -15. Fix various m68k bugs. -16. Fix various mips bugs. -17. Fix various mmix bugs. -18. Fix various ppc bugs. -19. Fix various spu bugs. -20. Fix various xtensa bugs. - -Changes from binutils 2.18.50.0.6: - -1. Update from binutils 2008 0502. -2. Add Intel EPT and MOVBE support. -3. Correct Intel FMA operand order. -4. Change Intel CLMUL to Intel PCLMUL. -5. Add -msse-check to x86 assembler to warn SSE instruction where -there is AVX equivalent. -6. Provide backward compatibility for ELF object files with more -than 64K sections generated by the older binutils. PR 6412. -7. Improve FDPIC support. -8. Add -wL switch to readelf to dump decoded contents of .debug_line. -9. Add -ag switch to assembler show general information in listings. -10. Improve objcopy symbol filtering performance. PR 6034. -12. Correct think archive support. -13. Improve ELF/Sparc support. -14. Fix various mips bugs. -15. Fix various sh bugs. -16. Fix various spu bugs. - -Changes from binutils 2.18.50.0.5: - -1. Update from binutils 2008 0403. -2. Add Intel AES, CLMUL, AVX/FMA support. -3. Improve error handling in x86 linker for undefined hidden/internal -symbols when building a shared object. PR ld/5789/5943. -4. Add a new ELF linker, gold. -5. Add think archive support. -6. Fix various arm bugs. -7. Fix various avr bugs. -8. Fix various bfin bugs. -9. Fix various hppa bugs. -10. Fix various m68k bugs. -11. Fix various mips bugs. -12. Fix various s390 bugs. -13. Fix various spu bugs. - -Changes from binutils 2.18.50.0.4: - -1. Update from binutils 2008 0314. -2. Add Intel XSAVE new instruction support. -3. Fix an ia64 linker crash on unsupported TLS relocations. PR 5913. -4. Fix x86 assembler for gcc 4.3. -5. Fix a linker memory corruption. PR 5788. -6. Correct linker 64k section support. PR 5900. -7. Correct hidden, weak and undefined symbol handling. PR 5789. -8. Fix linker for 64bit targets on 32bit hosts. PR 5303/5755. -9. Fix assembler crash with .set on register. PR 5543. -10. Fix a typo in linker. PR 5765. -11. Fix "string -O" infinite loop. PR 5713. -12. Fix .exitm in assembler. PR 5895. -13. Fix a linker crash. PR 5761. -14. Fix various arm bugs. -15. Fix various bfin bugs. -16. Fix various h8 bugs. -17. Fix various ppc bugs. -18. Fix various spu bugs. -19. Fix various xtensa bugs. - -Changes from binutils 2.18.50.0.3: - -1. Update from binutils 2008 0208. -2. Update readelf/objdump to dump DWARF frame info with machine -register names on x86. -3. Optimize x86-64 assembler to omit REX.W prefix when it is ignored. -4. Add operand size check to x86 assembler. PR 5534. -5. Add -march=CPU[,+EXTENSION...], -mmnemonic, -msyntax, -mindex-reg, --mnaked-reg and -mold-gcc options to x86 assembler. -6. Add -Mintel-mnemonic/-Mintel-mnemonic options to x86 disassembler. -7. Update x86 disassembler to handle r12 like rsp in memory operand. -8. Update x86 disassembler to properly support movntq, movntsd, -movntss, movntps, movntpd, movntdq and movntdqa. -9. Update x86 disassembler to support AMD nops. -10. Update x86 disassembler for cvtsi2ss/cvtsi2sd. -11. Fix x86 assembler to support new instructions on 2 different archs. -12. Update linker not to generate incorrect debug info for 64bit target -on 32bit host. PR 5303. -13. Update ia64 assembler to support new registers in Itanium 9100 -series. -14. Fix strip on PT_NOTE segment. PR 5488. -15. Fix strip/objcopy on HPUX/ia64. PR 5449. -16. Fix strip/objcopy for EFI. PR 5307. -17. Remove duplicated sections from objdump for COFF/PE. PR 5299. -18. Fix a linker corruption. PR 5522. -19. Fix mingw for 64bit targets. -20. Fix various arm bugs. -21. Fix various fr30 bugs. -22. Fix various frv bugs. -23. Fix various hppa bugs. -24. Fix various m10300 bugs. -25. Fix various m32r bugs. -26. Fix various m68k bugs. -27. Fix various mips bugs. -28. Fix various ppc bugs. -29. Fix various spu bugs. -30. Fix various xtensa bugs. - -Changes from binutils 2.18.50.0.2: - -1. Update from binutils 2007 1102. -2. Support link in Linux object files on FreeBSD. PR 4424. -3. Add Intel SMX instruction support to x86 assembler/diasassembler. -4. Fix an objcopy regression where we failed to adjust section -flags. PR 5233. -5. Improve irregular instruction support in x86 assembler. -6. Improve support for instructions with restricted operands in x86 -diasassembler. -7. Fix an x86-64 assembler bug where extra REX byte generated in Intel -mode. PR 5109. -8. Update .pushsection directive support in assembler. PRs 5221. -9. Improve linker -z relro support. -10. Add support for generating wide character strings in assembler. -11. Improve relocation process for DWARF debug info in readelf. -12. Add a linker warning for invalid merge section with unterminated -strings. -13. Improve linker support of DWARF debug info for discarded sections -during linker-relaxation. -14. Improve fabs detection. PR 5147. -15. Improve non-bash support. PR 5215. -16. Improve support for non-gcc compiler. PRs 5146/5160. -17. Improve error messages. PRs 5172/5173/5161/5158/5155/ -5121-5126/5129/5131-5137/5143/5142/5078/5089/5090. -18. Fix various cr16 bugs. -19. Fix various m10300 bugs. -20. Fix various mips bugs. -21. Fix various ppc bugs. -22. Fix various xtensa bugs. - -Changes from binutils 2.18.50.0.1: - -1. Update from binutils 2007 1001. -2. Speed up hash table lookup in linker. -3. Add -c/--archive-index option to readelf. -4. Fix an readelf crash. PR 5011. -5. Fix an x86 assembler Intel mode bug. PR 5080. -6. Add EIP support in x86 assembler. -7. Add fake index registers, EIZ/RIZ, to x86 assembler/disassembler. -8. Improve x86 assembler error message for truncated values. PR 5026. -9. Remove a COFF assertion in COFF assembler. PR 5035. -10. Add AMD SSE5 support to x86 assembler/disassembler. -11. Fix x86 assembler for extrq/insertq in Intel mode. -12. Fix x86 disassembler for invalid opcodes in 64bit. PR 5072. -13. Fix auto-import in PE-COFF linker. PR 4844. -14. Correct -z now in ELF linker. -15. Fix a --build-id linker crash. PR 5025. -16. Improved x86 assembler/disassembler infrastructure for new -instruction support. -17. Fix various m68k bugs. -18. Fix various ppc bugs. -19. Fix various spu bugs. - -Changes from binutils 2.17.50.0.18: - -1. Update from binutils 2007 0908. -2. Fix an ELF linker for SHT_NOBITS sections. PR 2864/5006. -3. Improve TLS transition check in i386 and x86-64 linkers. -4. Fix a GD->LE/LD->LE TLS transition bug in i386 and x86-64 linkers. -PR 4918. -5. Update ELF linker to dump segment map when a section can't be allocated -in segment. PR 4909. -6. Clean up x86 disassembler to remove fixups and make it more -table driven. -7. Fix x86 disassember for SSE instructions in Intel mode. PR 4834. -8. Properly handle bss segments in ELF linker. -9. Add --string-dump to readelf. -10. Fix objcopy -R .debug_* --only-keep-debug regression. PR 4888. -11. Change x86 assembler to follow SVME specification. -12. Fix x86 assembler for cmpxchg8b, pextrb and pinsrb in Intel mode. -13. Update x86 assembler to better handle expressions with @GOT suffix. -PR 4079. -14. Properly handle section alignment >= 128 byte for PECOFF. -15. Fix an ELF linker --build-id option crash. PR 4923. -16. Fix binutils build on HP-UX. PR 4875. -17. Fix a regression of the a.out linker -N option. PR 4515. -18. Update x86 disassembler for invlpg, fxsave, fxrstor, ldmxcsr and -stmxcsr in Intel mode. -19. Fix x86 assembler for SSE4 instructions in Intel mode. -20. Fix various arm bugs. -21. Fix various mips bugs. -22. Fix various ppc bugs. -23. Fix various spu bugs. -24. Fix various xtensa bugs. - -Changes from binutils 2.17.50.0.17: - -1. Update from binutils 2007 0731. -2. Switching from GPLv2 to GPLv3. -3. Add a new ELF linker option, --build-id, to generate a unique -per-binary identifier embedded in a note section. -4. Remove COFF/x86-64 from PE-COFF/x86-64. -5. Fix a "nm -l" crash on DWARF info. PR 4797. -6. Match symbol type when creating symbol aliase in ELF shared library. -7. Fix addr2line on relocatable linux kernel. PR 4756. -8. Change disassembler to print addend as signed. -9. Support section alignment from 128 to 8192 bytes for PE-COFF. -10. Add attribute section to ELF linker. -11. Fix ELF linker to meet gABI alignment requirement. PR 4701. -12. Add support for reading in debug information via a .gnu_debuglink -section. -13. Fix string merge for ia64 linker. PR 4590. -14. Add --common to size to display total size for *COM* syms. -15. Fix "strip --strip-unneeded" on relocatable files. PR 4716. -16. Fix "objcopy/strip --only-keep-debug" for SHT_NOTE sections. -17. Fix objdump -S with unit-at-a-time. -18. Properly handle "-shared -pie" in linker. PR 4409. -19. Fix x86 disassembler in Intel mode for various SIMD instruction. -PRs 4667/4834. -20. Update x86-64 assembler to long nop sequence by default. -21. Fix --32 for x86-64 mingw assembler. -22. Fix a memory corruption in assembler. PR 4722. -22. Properly support 64bit PE-COFF on hosts where long isn't 64bit. -23. Add #line in generated linker source files. -24. Fix linker crash on SIZEOF. PR 4782. -27. Add CR16 support. -28. Add windmc tool for Windows. -29. Generate x86 instruction/register definitions from ascii tables. -30. Fix strip for Solaris. PR 4712. -31. Fix various mips bugs. -32. Fix various ppc bugs. -33. Fix various spu bugs. -34. Fix various xtensa bugs. - -Changes from binutils 2.17.50.0.16: - -1. Update from binutils 2007 0615. -2. Preserve section alignment for copy relocation. PR 4504. -3. Properly fix regression with objcopy --only-keep-debug. PR 4479. -4. Fix ELF eh frame handling. PR 4497. -5. Fix ia64 string merge. PR 4590. -5. Don't use PE target on EFI files nor EFI target on PE files. -6. Speed up linker with many input files. -7. Support cross compiling windres. PR 2737. -8. Fix various windres bugs. -9. Fix various arms bugs. -10. Fix various m68k bugs. -11. Fix various mips bugs. -12. Fix various ppc bugs. -13. Fix various sparc bugs. -14. Fix various spu bugs. -15. Fix various xtensa bugs. - -Changes from binutils 2.17.50.0.15: - -1. Update from binutils 2007 0511. -2. Fix objcopy --only-keep-debug and linker multiple BSS sections handling. -PR 4479. -3. Fix "readelf -s -D" for gnu hash. PR 4476. -4. Fix ia64 linker crash with --unresolved-symbols=ignore-all. PR 4409. -5. Improve crc32 support in x86 assembler/dissassembler. -6. Improve displacement handling in x86 dissassembler. PR 4430. -7. Correct PC relative displacement handling in x86-64 dissassembler for -Intel mode. PR 4429. -8. Fix various PPC bugs. -9. Fix various SPU bugs. -10. Fix various ARM bugs. -11. Fix various m68k bugs. -12. Fix various xtensa bugs. - -Changes from binutils 2.17.50.0.14: - -1. Update from binutils 2007 0418. -2. Support Intel SSE4 instructions. -3. Fix linker --fatal-warnings for --warn-shared-textrel. PR 4304. -4. Improve linker error message to identify linker script error -location. PR 4090. -5. Fix objcopy to allow removing all sections. PR 4348. -6. Don't print addresses of 32-bit targets as 64-bit values on 64bit -host. PR 4292. -7. Improve checking for corrupted input files. PR 4110. -8. Improve alpha linker performance. -9. Add a new linker option, -l:foo. -10. Fix a PPC linker bug. PR 4267. -11. Misc vxworks bug fixes. -12. Misc SH bug fixes. -13. Misc SPU bug fixes. -14. Misc ARM bug fixes. -15. Misc MIPS bug fixes. -16. Misc xtensa bug fixes. - -Changes from binutils 2.17.50.0.13: - -1. Update from binutils 2007 0322. -2. Fix >16byte nop padding regression in x86 assembler. -3. Fix x86-64 disassembler for xchg. PR 4218. -4. Optimize opcode for x86-64 xchg. -5. Allow register operand with x86 nop. -6. Properly handle holes between sections for PE-COFF. PR 4210. -7. Print more PE-COFF info for objdump -p. -8. Report missing matching LO16 relocation for HI16 relocation in mips -linker. -9. Use PC-relative relocation for Win64. -10. Fix strip for Solaris. PR 3535. -11. Fix a C++ demangler crash. -12. Some m32c update. -13. Fix misc ARM bugs. - -Changes from binutils 2.17.50.0.12: - -1. Update from binutils 2007 0315. -2. Add EFI/x86-64 support. -3. Fix ELF linker for relocation against STN_UNDEF. PR 3958. -4. Fix ELF linker for SHT_NOBITS section whose VMA > page size. PR 4144. -5. Make assembler and disassembler consistent for "test %eax,%ebx". PR -4027. -6. Fix i386 32bit address wraparound. PR 3966. -7. Allow Linux/i386 linker to read FreeBSD/i386 object files. -8. Fix ELF linker crash upon use of .gnu.warning.<symbol> sections. PR -3953. -9. Fix ELF linker to issue an error on bad section in segment. PR 4007. -10. Support enabling both x86_64-mingw32 and i386-mingw32. PR 3945. -11. Fix assembler to stabilize .gcc_except_table relaxation. PR 4029. -12. Fix a MIPS linker crash. PR 3852. -13. Fix readelf for h8300-elf. PR 3800. -14. Fix strip for Solaris. PR 3535. -15. Misc xtensa bug fixes. -16. Misc PPC bug fixes. -17. Misc SPU bug fixes. -18. Add support for Toshiba MeP. - -Changes from binutils 2.17.50.0.11: - -1. Update from binutils 2007 0128. -2. Remove duplicate code in x86 assembler. -3. Fix 32bit and 64bit HPPA/ELF. - -Changes from binutils 2.17.50.0.10: - -1. Update from binutils 2007 0125. -2. Support environment variables, LD_SYMBOLIC for -Bsymbolic and -LD_SYMBOLIC_FUNCTIONS for -Bsymbolic-functions. -3. Build binutils rpm with LD_SYMBOLIC_FUNCTIONS=1 and reduce PLT -relocations in libfd.so by 84%. -4. Enable sharable sections only for ia32, x86-64 and ia64. -5. Properly handle PT_GNU_RELRO segment for objcopy. - -Changes from binutils 2.17.50.0.9: - -1. Update from binutils 2007 0122. -2. Implement sharable section proposal for ia32, x86-64 and ia64: - -http://groups-beta.google.com/group/generic-abi - -3. Implement linker enhancement, -Bsymbolic-functions, ---dynamic-list-cpp-new and --dynamic-list-data. PR 3831. -4. Implement new linker switch, --default-script=FILE/-dT FILE. -5. Check EI_OSABI when reading ELF files. PR 3826. -6. Fix x86 assembler error message. PR 3830. -7. Fix a bug in ld testsuite. PR 1283. -8. Don't include archive64.o for 32bit target. PR 3631. -9. Support -z max-page-size and -z common-page-size in user provided -linker script. -10. Fix 32bit library support for GNU/kFreeBSD/x86-64. PR 3843. -11. Fix some bugs in Score assembler. PR 3871. -12. Fix various bugs in ARM assembler. PR 3707 and more. -13. Add Fido support. - -Changes from binutils 2.17.50.0.8: - -1. Update from binutils 2007 0103. -2. Fix --wrap linker bug. -3. Improve handling ELF binaries generated by foreign ELF linkers. -4. Various ELF M68K bug fixes. -5. Score bug fixes. -6. Don't read past end of archive elements. PR 3704. -7. Improve .eh_frame_hdr section handling. -8. Fix symbol visibility with comdat/linkonce sections in ELF linker. -PR 3666. -9. Fix 4 operand instruction handling in x86 assembler. -10. Properly check the 4th operand in x86 assembler. PR 3712. -11. Fix .cfi_endproc handling in assembler. PR 3607. -12. Various ARM bug fixes. -13. Various PE linker fixes. -14. Improve x86 dissassembler for cmpxchg16b. - -Changes from binutils 2.17.50.0.7: - -1. Update from binutils 2006 1201. -2. Fix "objcopy --only-keep-debug" crash. PR 3609. -3. Fix various ARM ELF bugs. -4. Fix various xtensa bugs. -5. Update x86 disassembler. - -Changes from binutils 2.17.50.0.6: - -1. Update from binutils 2006 1127. -2. Properly set ELF output segment address when the first section in -input segment is removed. -3. Better merging of CIEs in linker .eh_frame optimizations. -4. Support .cfi_personality and .cfi_lsda assembler directives. -5. Fix an ARM linker crash. PR 3532. -6. Fix various PPC64 ELF bugs. -7. Mark discarded debug info more thoroughly in linker output. -8. Fix various MIPS ELF bugs. -9. Fix readelf to display program interpreter path > 64 chars. PR 3384. -10. Add support for PowerPC SPU. -11. Properly handle cloned symbols used in relocations in assembler. PR -3469. -12. Update opcode for POPCNT in amdfam10 architecture. - -Changes from binutils 2.17.50.0.5: - -1. Update from binutils 2006 1020. -2. Don't make debug symbol dynamic. PR 3290. -3. Don't page align empty SHF_ALLOC sections, which leads to very large -executables. PR 3314. -4. Use a different section index for section relative symbols against -removed empty sections. -5. Fix a few ELF EH frame handling bugs. -6. Don't ignore relocation overflow on branches to undefweaks for -x86-64. PR 3283. -7. Rename MNI to SSSE3. -8. Properly append symbol list for --dynamic-list. -lists. -9. Various ARM ELF fixes. -10. Correct 64bit library search path for Linux/x86 linker with 64bit -support. -11. Fix ELF linker to copy OS/PROC specific flags from input section to -output section. -12. Fix DW_FORM_ref_addr handling in linker dwarf reader. PR 3191. -13. Fix ELF indirect symbol handling. PR 3351. -14. Fix PT_GNU_RELRO segment handling for SHF_TLS sections. Don't add -PT_GNU_RELRO segment when there are no relro sections. PR 3281. -15. Various MIPS ELF fixes. -16. Various Sparc ELF fixes. -17. Various Xtensa ELF fixes. - -Changes from binutils 2.17.50.0.4: - -1. Update from binutils 2006 0927. -2. Fix linker regressions of section address and section relative symbol -with empty output section. PR 3223/3267. -3. Fix "strings -T". PR 3257. -4. Fix "objcopy --only-keep-debug". PR 3262. -5. Add Intell iwmmxt2 support. -6. Fix an x86 disassembler bug. PR 3100. - -Changes from binutils 2.17.50.0.3: - -1. Update from binutils 2006 0924. -2. Speed up linker on .o files with debug info on linkonce sections. -PR 3111. -3. Added x86-64 PE support. -4. Fix objcopy/strip on .o files with section groups. PR 3181. -5. Fix "ld --hash-style=gnu" crash with gcc 3.4.6. PR 3197. -6. Fix "strip --strip-debug" on .o files generated with -"gcc -feliminate-dwarf2-dups". PR 3186. -7. Fix "ld -r" on .o files generated with "gcc -feliminate-dwarf2-dups". -PR 3249. -8. Add --dynamic-list to linker to make global symbols dynamic. -9. Fix magic number for EFI ia64. PR 3171. -10. Remove PT_NULL segment for "ld -z relro". PR 3015. -11. Make objcopy to perserve the file formats in archive elements. -PR 3110. -12. Optimize x86-64 assembler and fix disassembler for -"add32 mov xx,$eax". PR 3235. -13. Improve linker diagnostics. PR 3107. -14. Fix "ld --sort-section name". PR 3009. -15. Updated an x86 disassembler bug. PR 3000. -16. Various updates for PPC, ARM, MIPS, SH, Xtensa. -17. Added Score support. - -Changes from binutils 2.17.50.0.2: - -1. Update from binutils 2006 0715. -2. Add --hash-style to ELF linker with DT_GNU_HASH and SHT_GNU_HASH. -3. Fix a visibility bug in ELF linker (PR 2884). -4. Properly fix the i386 TLS linker bug (PR 2513). -5. Add assembler and dissassembler support for Pentium Pro nops. -6. Optimize x86 nops for Pentium Pro and above. -7. Add -march=/-mtune= to x86 assembler. -8. Fix an ELF linker with TLS common symbols. -9. Improve program header allocation in ELF linker. -10. Improve MIPS, M68K and ARM support. -11. Fix an ELF linker crash when reporting alignment change (PR 2735). -12. Remove unused ELF section symbols (PR 2723). -13. Add --localize-hidden to objcopy. -14. Add AMD SSE4a and ABM new instruction support. -15. Properly handle illegal x86 instructions in group 11 (PR 2829). -16. Add "-z max-page-size=" and "-z common-page-size=" to ELF linker. -17. Fix objcopy for .tbss sections. - -Changes from binutils 2.17.50.0.1: - -1. Update from binutils 2006 0526. -2. Change the x86-64 maximum page size to 2MB. -3. Support --enable-targets=all for 64bit target and host (PR 1485). -4. Properly update CIE/FDE length and align section for .eh_frame -section (PR 2655/2657). -5. Properly handle removed ELF section symbols. -6. Fix an ELF linker regression introduced on 2006-04-21. -7. Fix an segfault in PPC ELF linker (PR 2658). -8. Speed up the ELF linker by caching the result of kept section check. -9. Properly create stabs section for ELF. -10. Preserve ELF program header when copying ELF files. -11. Properly handle ELF SHN_LOPROC/SHN_HIOS when checking section -index (PR 2607). -12. Misc mips updates. -13. Misc arm updates. -14. Misc xtensa updates. -15. Fix an alpha assembler warning (PR 2598). -16. Fix assembler buffer overflow. -17. Properly disassemble sgdt/sidt for x86-64. - -Changes from binutils 2.16.91.0.7: - -1. Update from binutils 2006 0427. -2. Fix an objcopy regression (PR 2593). -3. Reduce ar memory usage (PR 2467). -4. Allow application specific ELF sections (PR 2537). -5. Fix an i386 TLS linker bug (PR 2513). -6. Speed up ia64 linker by 1300X in some cases (PR 2442). -7. Check illegal immediate register operand in i386 assembler (PR -2533). -8. Fix a strings bug (PR 2584). -9. Better handle corrupted ELF files (PR 2257). -10. Fix a MIPS linker bug (PR 2267). - -Changes from binutils 2.16.91.0.6: - -1. Update from binutils 2006 0317. -2. Support Intel Merom New Instructions in assembler/disassembler. -3. Support Intel new instructions in Montecito. -4. Fix linker "--as-needed" (PR 2434). -5. Fix linker "-s" regression (PR 2462). -6. Fix REP prefix for string instructions in x86 disassembler -(PR 2428). -7. Fix the weak undefined symbols in PIE (PR 2218). -8. Fix 2 DWARF reader bugs (PRs 2443, 2338). -9. Improve ELF linker error message (PR 2322). -10. Avoid abort with dynamic symbols in >64K sections (PR 2411). -11. Handle mismatched symbol types for executables (PR 2404). -12. Avoid a linker linkonce regression (PR 2342). - -Changes from binutils 2.16.91.0.5: - -1. Update from binutils 2006 0212. -2. Correct Linux linker search order for DT_NEEDED entries (PR 2290). -3. Fix the x86-64 disassembler for control/debug register moves. -4. Properly handle ELF strip/objcopy with unmodified program header -(PR 2258). -5. Improve ELF linker error handling when there are not enough room for -program headers (PR 2322). -6. Properly handle weak undefined symbols in PIE (PR 2218). -7. Support new i386/x86-64 TLS relocations. -8. Fix addr2line for linux kernel (PR 2096). -9. Fix an assembler memory leak with --statistics. -10. Avoid an ia64 assembler regression (PR 2117). - -Changes from binutils 2.16.91.0.4: - -1. Update from binutils 2005 1219. -2. Fix a MIPS linker regression (PR 1932). -3. Fix an objcopy bug for ia64 (PR 1991). -4. Fix a linker crash on bad input (PR 2008). -5. Fix 64bit monitor and mwait (PR 1874). - -Changes from binutils 2.16.91.0.3: - -1. Update from binutils 2005 1111. -2. Fix ELF orphan section handling (PR 1467) -3. Fix ELF section attribute handleing (PR 1487). -4. Fix IA64 unwind info dump for relocatable files. (PR 1436). -5. Add DWARF info dump to objdump. -6. Fix SHF_LINK_ORDER handling (PR 1321). -7. Don't allow "ld --just-symbols" on DSO (PR 1263). -8. Fix a "ld -u" crash on TLS symbol (PR 1301). -9. Fix an IA64 linker crash (PR 1247). -10. Fix a MIPS linker bug (PR 1150). -11. Fix a M68K linker bug (PR 1775). -12. Fix an ELF symbol versioning linker bug (PR 1540). -13. Improve linker error handling (PR 1208). -14. Add new SPARC processors to SunOS for objcopy (PR 1472). -15. Add "@file" to read options from a file. -16. Add assembler weakref support. - -Changes from binutils 2.16.91.0.2: - -1. Update from binutils 2005 0821. -2. Support x86-64 medium model. -3. Fix "objdump -S --adjust-vma=xxx" (PR 1179). -4. Reduce R_IA64_NONE relocations from R_IA64_LDXMOV relaxation. -5. Fix x86 linker regression for dosemu. -6. Add "readelf -t/--section-details" to display section details. -7. Fix "as -al=file" regression (PR 1118). - -Changes from binutils 2.16.91.0.1: - -1. Update from binutils 2005 0720. -2. Add Intel VMX support. -3. Add AMD SVME support. -4. Add x86-64 new relocations for medium model. -5. Fix a PIE regression (PR 975). -6. Fix an x86_64 signed 32bit displacement regression. -7. Fix PPC PLT (PR 1004). -8. Improve empty section removal. - -Changes from binutils 2.16.90.0.3: - -1. Update from binutils 2005 0622. -2. Fix a linker versioning bug exposed by gcc 4 (PR 1022/1023/1025). -3. Optimize ia64 br->brl relaxation (PR 834). -4. Improve linker empty section removal. -5. Fix DWARF 2 line number reporting (PR 990). -6. Fix DWARF 2 line number reporting regression on assembly file (PR -1000). - -Changes from binutils 2.16.90.0.2: - -1. Update from binutils 2005 0510. -2. Update ia64 assembler to support comdat group section generated by -gcc 4 (PR 940). -3. Fix a linker crash on bad input (PR 939). -4. Fix a sh64 assembler regression (PR 936). -5. Support linker script on executable (PR 882). -6. Fix the linker -pie regression (PR 878). -7. Fix an x86_64 disassembler bug (PR 843). -8. Fix a PPC linker regression. -9. Misc speed up. - -Changes from binutils 2.16.90.0.1: - -1. Update from binutils 2005 0429. -2. Fix an ELF linker regression (PR 815). -3. Fix an empty section removal related bug. -4. Fix an ia64 linker regression (PR 855). -5. Don't allow local symbol to be equated common/undefined symbols (PR -857). -6. Fix the ia64 linker to handle local dynamic symbol error reporting. -7. Make non-debugging reference to discarded section an error (PR 858). -8. Support Sparc/TLS. -9. Support rpm build with newer rpm. -10. Fix an alpha linker regression. -11. Fix the non-gcc build regression. - -Changes from binutils 2.15.94.0.2.2: - -1. Update from binutils 2005 0408. -2. The i386/x86_64 assemblers no longer accept instructions for moving -between a segment register and a 32bit memory location. -3. The x86_64 assembler now allows movq between a segment register and -a 64bit general purpose register. -4. 20x Speed up linker for input files with >64K sections. -5. Properly report ia64 linker relaxation failures. -6. Support tuning ia64 assembler for Itanium 2 processors. -7. Linker will remove empty unused output sections. -8. Add -N to readelf to display full section names. -9. Fix the ia64 linker to support linkonce text sections without unwind -sections. -10. More unwind directive checkings in the ia64 assembler. -11. Speed up linker with wildcard handling. -12. Fix readelf to properly dump .debug_ranges and .debug_loc sections. - -Changes from binutils 2.15.94.0.2: - -1. Fix greater than 64K section support in linker. -2. Properly handle i386 and x86_64 protected symbols in linker. -3. Fix readelf for LEB128 on 64bit hosts. -4. Speed up readelf for section group process. -5. Include ia64 texinfo pages. -6. Change ia64 assembler to check hint.b for Montecito. -7. Improve relaxation failure report in ia64 linker. -8. Fix ia64 linker to allow relax backward branch in the same section. - -Changes from binutils 2.15.94.0.1: - -1. Update from binutils 2004 1220. -2. Fix strip for TLS symbol references. - -Changes from binutils 2.15.92.0.2: - -1. Update from binutils 2004 1121. -2. Put ia64 .ctors/.dtors sections next to small data section for -Intel ia64 compiler. -3. Fix -Bdynamic/-Bstatic handling for linker script. -4. Provide more information on relocation overflow. -5. Add --sort-section to linker. -6. Support icc 8.1 unwind info in readelf. -7. Fix the infinite loop bug on bad input in the ia64 assembler. -8. Fix ia64 SECREL relocation in linker. -9. Fix a section group memory leak in readelf. - -Changes from binutils 2.15.91.0.2: - -1. Update from binutils 2004 0927. -2. Work around a section header bug in Intel ia64 compiler. -3. Fix an unwind directive bug in the ia64 assembler. -4. Fix various PPC bugs. -5. Update ARM support. -6. Fix an x86-64 linker warning while building Linux kernel. - -Changes from binutils 2.15.91.0.1: - -1. Update from binutils 2004 0727. -2. Fix the x86_64 linker to prevent non-PIC code in shared library. -3. Fix the ia64 linker to warn the relotable files which can't be -relaxed. -4. Fix the comdat group support. Allow mix single-member comdat group -with linkonce section. -5. Added --add-needed/--no-add-needed options to linker. -6. Fix the SHF_LINK_ORDER support. -7. Fix the ia64 assembler for multiple sections with the same name and -SHT_IA_64_UNWIND sections. -8. Fix the ia64 assembler for merge section and relaxation. - -Changes from binutils 2.15.90.0.3: - -1. Update from binutils 2004 0527. -2. Fix -x auto option in the ia64 assembler. -3. Add the AR check in the ia64 assembler. -4. Fix the section group support. -5. Add a new -z relro linker option. -6. Fix an exception section placement bug in linker. -7. Add .serialize.data and .serialize.instruction to the ia64 -assembler. - -Changes from binutils 2.15.90.0.2: - -1. Update from binutils 2004 0415. -2. Fix the linker for weak undefined symbol handling. -3. Fix the ELF/Sparc and ELF/Sparc64 linker for statically linking PIC -code. - -Changes from binutils 2.15.90.0.1.1: - -1. Update from binutils 2004 0412. -2. Add --as-needed/--no-as-needed to linker. -3. Fix -z defs in linker. -4. Always reserve the memory for ia64 dynamic linker. -5. Fix a race condition in ia64 lazy binding. - -Changes from binutils 2.15.90.0.1: - -1. Fixed an ia64 assembler bug. -2. Install the assembler man page. - -Changes from binutils 2.14.90.0.8: - -1. Update from binutils 2004 0303. -2. Fixed linker for undefined symbols with non-default visibility. -3. Sped up linker weakdef symbol handling. -4. Fixed mixing ELF32 and ELF64 object files in archive. -5. Added ia64 linker brl optimization. -6. Fixed ia64 linker to disallow invalid dynamic relocations. -7. Fixed DT_TEXTREL handling in ia64 linker. -8. Fixed alignment handling in ia64 assembler. -9. Improved ia64 assembler unwind table handling. - -Changes from binutils 2.14.90.0.7: - -1. Update from binutils 2004 0114. -2. Fixed an ia64 assembler unwind table bug. -3. Better handle IPF linker relaxation overflow. -4. Fixed misc PPC bugs. - -Changes from binutils 2.14.90.0.6: - -1. Update from binutils 2003 1029. -2. Allow type changes for undefined symbols. -3. Fix EH frame optimization. -4. Fix the check for undefined versioned symbol with wildcard. -5. Support generating code for Itanium. -6. Detect and warn bad symbol index. -7. Update IPF assemebler DV check. - -Changes from binutils 2.14.90.0.5: - -1. Update from binutils 2003 0820. -2. No longer use section names for ELF section types nor flags. -3. Fix some ELF/IA64 linker bugs. -4. Fix some ELF/ppc bugs. -5. Add archive support to readelf. - -Changes from binutils 2.14.90.0.4.1: - -1. Update from binutils 2003 0722. -2. Fix an ELF/mips linker bug. -3. Fix an ELF/hpppa linker bug. -4. Fix an ELF/ia64 assembler bug. -5. Fix a linkonce support with C++ debug. -6. A new working C++ demangler. -7. Various alpha, mips, ia64, ... bug fixes. -8. Support for the current gcc and glibc. - -Changes from binutils 2.14.90.0.4: - -1. Fix an ia64 assembler hint@pause bug. -2. Support Intel Prescott New Instructions. - -Changes from binutils 2.14.90.0.3: - -1. Work around the brain dead libtool. - -Changes from binutils 2.14.90.0.2: - -1. Update from binutils 2003 0523. -2. Fix 2 ELF visibility bugs. -3. Fix ELF/ppc linker bugs. - -Changes from binutils 2.14.90.0.1: - -1. Update from binutils 2003 0515. -2. Fix various ELF visibility bugs. -3. Fix some ia64 linker bugs. -4. Add more IAS compatibilities to ia64 assembler. - -Changes from binutils 2.13.90.0.20: - -1. Update from binutils 2003 0505. -2. Fix various ELF visibility bugs. -3. Fix some ia64 linker bugs. -4. Fix some ia64 assembler bugs. -5. Add some IAS compatibilities to ia64 assembler. -6. Fix ELF common symbol alignment. -7. Fix ELF weak symbol handling. - -Changes from binutils 2.13.90.0.18: - -1. Update from binutils 2003 0319. -2. Fix an ia64 linker brl relaxation bug. -3. Fix some ELF/ppc linker bugs. - -Changes from binutils 2.13.90.0.16: - -1. Update from binutils 2003 0121. -2. Fix an ia64 gas bug. -3. Fix some TLS bugs. -4. Fix some ELF/ppc bugs. -5. Fix an ELF/m68k bug. - -2. Include /usr/bin/c++filt. -Changes from binutils 2.13.90.0.14: - -1. Update from binutils 2002 1126. -2. Include /usr/bin/c++filt. -3. Fix "ld -r" with execption handling. - -Changes from binutils 2.13.90.0.10: - -1. Update from binutils 2002 1114. -2. Fix ELF/alpha bugs. -3. Fix an ELF/i386 assembler bug. - -Changes from binutils 2.13.90.0.4: - -1. Update from binutils 2002 1010. -2. More ELF/PPC linker bug fixes. -3. Fix an ELF/alpha linker bug. -4. Fix an ELF/sparc linker bug to support Solaris. -5. More TLS updates. - -Changes from binutils 2.13.90.0.3: - -1. Update from binutils 2002 0814. -2. Fix symbol versioning bugs for gcc 3.2. -3. Fix mips gas. - -Changes from binutils 2.13.90.0.2: - -1. Update from binutils 2002 0809. -2. Fix a mips gas compatibility bug. -3. Fix an x86 TLS bfd bug. -4. Fix an x86 PIC gas bug. -5. Improve symbol versioning support. - -The file list: - -1. binutils-2.18.50.0.9.tar.bz2. Source code. -2. binutils-2.18.50.0.8-2.18.50.0.9.diff.bz2. Patch against the - previous beta source code. -3. binutils-2.18.50.0.9.i686.tar.bz2. IA-32 binary tar ball for RedHat - EL 4. -4. binutils-2.18.50.0.9.ia64.tar.bz2. IA-64 binary tar ball for RedHat - EL 4. -5. binutils-2.18.50.0.9.x86_64.tar.bz2. X64_64 binary tar ball for RedHat - EL 4. - -The primary sites for the beta Linux binutils are: - -1. http://www.kernel.org/pub/linux/devel/binutils/ - -Thanks. - - -H.J. Lu -hjl.tools@gmail.com -08/23/2008 diff --git a/source/d/binutils/release.binutils-2.20.51.0.8 b/source/d/binutils/release.binutils-2.20.51.0.8 new file mode 100644 index 000000000..d3d2bd8a7 --- /dev/null +++ b/source/d/binutils/release.binutils-2.20.51.0.8 @@ -0,0 +1,491 @@ +This is the beta release of binutils 2.20.51.0.8 for Linux, which is +based on binutils 2010 0412 in CVS on sourceware.org plus various +changes. It is purely for Linux. + +All relevant patches in patches have been applied to the source tree. +You can take a look at patches/README to see what have been applied and +in what order they have been applied. + +Starting from the 2.20.51.0.4 release, no diffs against the previous +release will be provided. + +You can enable both gold and bfd ld with --enable-gold=both. Gold will +be installed as ld.gold and bfd ld will be installed as ld.bfd. By +default, ld.gold will be installed as ld. You can use the configure +option, --enable-gold=both/bfd to choose bfd ld as the default linker, +ld. IA-32 binary and X64_64 binary tar balls are configured with +--enable-gold=both/bfd --enable-plugins --enable-threads. + +Starting from the 2.18.50.0.4 release, the x86 assembler no longer +accepts + + fnstsw %eax + +fnstsw stores 16bit into %ax and the upper 16bit of %eax is unchanged. +Please use + + fnstsw %ax + +Starting from the 2.17.50.0.4 release, the default output section LMA +(load memory address) has changed for allocatable sections from being +equal to VMA (virtual memory address), to keeping the difference between +LMA and VMA the same as the previous output section in the same region. + +For + +.data.init_task : { *(.data.init_task) } + +LMA of .data.init_task section is equal to its VMA with the old linker. +With the new linker, it depends on the previous output section. You +can use + +.data.init_task : AT (ADDR(.data.init_task)) { *(.data.init_task) } + +to ensure that LMA of .data.init_task section is always equal to its +VMA. The linker script in the older 2.6 x86-64 kernel depends on the +old behavior. You can add AT (ADDR(section)) to force LMA of +.data.init_task section equal to its VMA. It will work with both old +and new linkers. The x86-64 kernel linker script in kernel 2.6.13 and +above is OK. + +The new x86_64 assembler no longer accepts + + monitor %eax,%ecx,%edx + +You should use + + monitor %rax,%ecx,%edx + +or + monitor + +which works with both old and new x86_64 assemblers. They should +generate the same opcode. + +The new i386/x86_64 assemblers no longer accept instructions for moving +between a segment register and a 32bit memory location, i.e., + + movl (%eax),%ds + movl %ds,(%eax) + +To generate instructions for moving between a segment register and a +16bit memory location without the 16bit operand size prefix, 0x66, + + mov (%eax),%ds + mov %ds,(%eax) + +should be used. It will work with both new and old assemblers. The +assembler starting from 2.16.90.0.1 will also support + + movw (%eax),%ds + movw %ds,(%eax) + +without the 0x66 prefix. Patches for 2.4 and 2.6 Linux kernels are +available at + +http://www.kernel.org/pub/linux/devel/binutils/linux-2.4-seg-4.patch +http://www.kernel.org/pub/linux/devel/binutils/linux-2.6-seg-5.patch + +The ia64 assembler is now defaulted to tune for Itanium 2 processors. +To build a kernel for Itanium 1 processors, you will need to add + +ifeq ($(CONFIG_ITANIUM),y) + CFLAGS += -Wa,-mtune=itanium1 + AFLAGS += -Wa,-mtune=itanium1 +endif + +to arch/ia64/Makefile in your kernel source tree. + +Please report any bugs related to binutils 2.20.51.0.8 to +hjl.tools@gmail.com + +and + +http://www.sourceware.org/bugzilla/ + +Changes from binutils 2.20.51.0.7: + +1. Update from binutils 2010 0412. +2. Don't bind unique symbol locally. PR 11434. +3. Add DWARF 4 support to linker and readelf. +4. Fix --no-export-dynamic for PIE. PR 11413. +5. Speed up x86 assembler. +6. Use memmove instead of memcpy to copy overlap memory in assembler. +PR 11456. +7. Improve gold. +8. Improve VMS support. +9. Improve PE support. +10. Add TI C6X support. +11. Improve arm support. +12. Improve cris support. +13. Improve ppc support. + +Changes from binutils 2.20.51.0.6: + +1. Update from binutils 2010 0318. +2. Don't set ELFOSABI_LINUX for undefined STT_GNU_IFUNC symbols. +3. Improve x86 assembler error messages. +4. Support vpermilp[ds] for x86. +5. Fix strip for group sections. +6. Fix objcopy for PE PIE. PR 11396. +7. Avoid 32bit overflow in linker. +8. Correct backslash quote logic in assembler. PR 11356. +9. Improve linker --section-start support. PR 11304. +10. Properly update LMA. PR 11219. +11. Don't combine .init_array/.fini_array sections for relocatable link. +12. Add Solaris Sparc/x86 linker support. +13. Support dumping .ARM.exidx/.ARM.extab. +14. Add STT_GNU_IFUNC support for Sparc. +15. Improve gold. +16. Improve arm support. +17. Improve avr support. +18. Improve mips support. +19. Improve ppc support. +20. Improve xtensa support. + +Changes from binutils 2.20.51.0.5: + +1. Update from binutils 2010 0205. +2. Support x86 XSAVE extended state core dump. +3. Add an option, -mavxscalar=, to x86 assembler to encoding AVX +scalar instructions with VL=256 and update x86 disassembler. +4. Add xsave64/xrstor64 to x86 assembler/disassembler. +5. Add all the possible aliases for VPCOM* insns to x86 assembler. +5. Fix --gc-sections to detect unresolved symbol in DSO. PR 11218. +6. Support number of ELF program segments > 64K. +7. Support BSD4.4 extended archive write. +8. Report error on bad section name with "objdump -j". PR 11225. +9. Linker now checks if all files are present and indicates those missing. +PR 4437. +10. Allow adding section from empy file with objcopy. +11. Update C++ demangler to support vector. +12. Improve gold. +13. Improve arm support. +14. Improve hppa support. +15. Improve ppc support. +16. Improve s390 support. + +Changes from binutils 2.20.51.0.4: + +1. Update from binutils 2010 0115. +2. Optimize x86 assembler/disassembler. +3. Add a new program, elfedit, to edit ELF files. PR 11131. +4. Add --dyn-syms to readelf. PR 11146. +5. Remove "Warning: " from objcopy error message. PR 11130. +6. Fix linker --gc-sections with undefined __start_XXX/__stop_XXX symbols. +PR 11133. +7. Fix linker --gc-sections with SHT_NOTE section. PR 11143. +8. Fix a c++filt bug. PR 11137. +9. Fix assembler listing. PR 11122. +10. Improve gold. Change --enable-gold to --enable-gold=[both[/{gold,bfd}]]. +11. Improve arm support. +12. Improve mips support. +13. Improve ppc support. +14. Improve MacOS support. + +Changes from binutils 2.20.51.0.3: + +1. Update from binutils 2009 1214. +2. Update x86 assembler to check lockable instructions for lock prefix. +3. Update x86 disassembler to display all prefixes. +4. Support AMD XOP new instructions. +5. Fix an x86 assembler regression on Intel syntax. PR 11037. +6. Improve ia64 linker relaxation. PR 10955. +7. Add --no-relax linker option. +8. Update readelf to dump .debug_pubtype sections. +9. Improve gold: + a. Support linking against STT_GNU_IFUNC symbols defined in + shared libraries. + b. Support linking with STB_GNU_UNIQUE symbols. +10. Improve arm support. +11. Improve m68k support. +12. Improve mips support. +13. Improve ppc support. + +Changes from binutils 2.20.51.0.2: + +1. Update from binutils 2009 1109. +2. Fix "ld -s -static" with STT_GNU_IFUNC symbols. PR 10911. +3. Fix file permission on PIE with objcopy. PR 10802. +4. Fix x86 Intel syntax assembler with relocation. PR 10856. +5. Fix x86 Intel syntax assembler with far jump. PR 10740. +6. Add AMD LWP support. +7. Renamed linker option --add-needed to --copy-dt-needed-entries. +8. Support enabling both ld and gold with --enable-gold=both and +--enable-linker=[bfd,gold]. +9. Improve gold. +10. Improve arm support. +11. Improve cris support. +12. Improve hppa support. +13. Improve m68k support. +14. Improve RX support. +15. Improve spu support. +16. Improve vax support. +17. Improve MacOS support. +18. Improve Windows support. + +Changes from binutils 2.20.51.0.1: + +1. Update from binutils 2009 1009. +2. Add .cfi_sections to assembler. +3. Fix a linker bug with local dynamic symbols. PR 10630. +4. Add DWARF-3/DWARF-4 support. +5. Fix the x86 assembler PIC bug. PR 10677. +6. Fix the x86-64 displacement assembler bug. PR 10636. +7. Fix the x86 assembler bug with Intel memory syntax. PR 10637. +8. Fix the x86 PIC assembler bug with Intel syntax. PR 10704. +9. Add RX support. +10. Improve gold. +11. Improve arm support. +12. Improve bfin support. +13. Improve cr16 support. +14. Improve m68k support. +15. Improve mips support. +16. Improve ppc support. + +Changes from binutils 2.19.51.0.14: + +1. Update from binutils 2009 0905. +2. Add Intel L1OM support. +3. Add MicroBlaze support. +4. Fix assembler for DWARF info without .file/.loc directives. PR 10531. +5. Improve -pie with TLS relocations on ia32 and x86-64. PRs 6443/10434. +6. Fix linker page size support. PR 10569. +7. Fix wildcard in linker version script. PR 10518. +8. Fix strip with STB_GNU_UNIQUE. PR 10492. +9. Fix strip on unwriteable files. PR 10364. +10. Fix crash with "ld --build-id /usr/lib/libc.a". PR 10555. +11. Fix linker for Linux kernel build. PR 10429. +12. Support string merge on .comment section. +13. Improve build with C++ compiler. +14. Improve gold. +15. Improve arm support. +16. Improve bfin support. +11. Improve m32c support. +17. Improve m68k support. +18. Improve mep support. +19. Improve mips support. +20. Improve ppc support. +21. Improve spu support. +22. Improve xtensa support. + +Changes from binutils 2.19.51.0.13: + +1. Update from binutils 2009 0722. +2. Fix linker for STT_GNU_IFUNC symbols in static executables. PR 10433. +3. Fix linker bug for Linux kernel build. PR 10429. + +Changes from binutils 2.19.51.0.12: + +1. Update from binutils 2009 0721. +2. Fix linker for undefined STT_GNU_IFUNC symbols. PR 10426. +3. Fix x86 assembler for nops in 64bit. PR 10420. +4. Add a new option, --insn-width, to objdump. +5. Improve arm support. +6. Improve mips support. +7. Improve gold support. + +Changes from binutils 2.19.51.0.11: + +1. Update from binutils 2009 0716. +2. Fix x86 assembler for jumping to local STT_GNU_IFUNC symbols. +3. Fix x86 linker for relocatable link with local STT_GNU_IFUNC symbols. +4. Implement ppc STT_GNU_IFUNC support. +5. Support x86 FMA4. +6. Fix linker regression with Linux kernel build. +7. Support unordered references in DWARF reader. +8. Improve PE/COFF support. +8. Improve arm support. +9. Improve m10300 support. +10. Improve ppc support. +11. Improve spu support. +12. Improve gold support. + +Changes from binutils 2.19.51.0.10: + +1. Update from binutils 2009 0627. +2. Fix strip on static executable with STT_GNU_IFUNC symbol. PR 10337. +3. Add STB_GNU_UNIQUE support. +4. Fix objcopy on empty file. PR 10321. +5. Fix debug section for PE-COFF. +6. Suport build with gcc 4.5.0. +7. Improve arm support. +8. Improve ppc support. +9. Improve m10300 support. +10. Improve mep support. +11. Improve MacOS support. +12. Improve gold support. + +Changes from binutils 2.19.51.0.9: + +1. Update from binutils 2009 0618. +2. Update STT_GNU_IFUNC symbol support. PR 10269/10270. +3. Fix an assembler CFI bug. PR 10255. +4. Improve objdump. PR 10263/10288 +5. Improve readelf. +6. Improve arm support. +7. Improve moxie support. +8. Improve spu support. +9. Improve vax support. +10. Improve COFF/PE support. +11. Improve MacOS support. + +Changes from binutils 2.19.51.0.8: + +1. Update from binutils 2009 0606. +2. Update STT_GNU_IFUNC symbol support. + +Changes from binutils 2.19.51.0.7: + +1. Update from binutils 2009 0603. +2. Fix STT_GNU_IFUNC symbol with pointer equality. + +Changes from binutils 2.19.51.0.6: + +1. Update from binutils 2009 0601. +2. Update STT_GNU_IFUNC support. PR 10205. +3. Fix x86 asssembler Intel syntax regression with '$'. PR 10198. + +Changes from binutils 2.19.51.0.5: + +1. Update from binutils 2009 0529. +2. Rewrite STT_GNU_IFUNC, R_386_IRELATIVE and R_X86_64_IRELATIVE linker +support for STT_GNU_IFUNC symbols in shared library, dynamic executable +and static executable. +3. Add plugin support. +4. Improve spu support. + +Changes from binutils 2.19.51.0.4: + +1. Update from binutils 2009 0525. +2. Add STT_GNU_IFUNC, R_386_IRELATIVE and R_X86_64_IRELATIVE support to +assembler and linker. +3. Add LD_AS_NEEDED support to linker. +4. Remove AMD SSE5 support. +5. A new Intel syntax parser in x86 assembler. +6. Add DWARF discriminator support. +7. Add --64 support for x86 PE/COFF assembler. +8. Support common symbol with alignment for PE/COFF. +9. Improve gold support. +10. Improve arm support. +11. Improve mep support. +12. Improve mips support. +13. Improve ppc support. +14. Improve spu support. + +Changes from binutils 2.19.51.0.3: + +1. Update from binutils 2009 0418. +2. Remove EFI targets and use PEI targets for EFI. Add --file-alignment, +--heap, --image-base, --section-alignment, --stack and --subsystem command +line options for objcopy. PR 10074. +3. Update linker to warn alternate ELF machine code. +4. Fix x86 linker TLS transition. PR 9938. +5. Improve DWARF dumper to check relocations against STT_SECTION +symbol. +6. Guard DWARF dumper on bad DWARF input. +7. Add EM_ETPU and EM_SLE9X. Reserve 3 ELF machine types for Intel. +8. Adding a linker missing entry symbol warning for -pie. PR 9970. +9. Make the -e option for linker to imply -u. PR 6766. +10. Properly handle paging for PEI targets. +11. Fix assembler listing with input from stdin. +12. Update objcopy/string to generate symbol table if there is any +relocation in output. PR 9945. +13. Require texinfo 4.7 for build. PR 10039. +14. Add moxie support. +15. Improve gold support. +16. Improve AIX support. +17. Improve arm support. +18. Improve cris support. +19. Improve crx support. +20. Improve mips support. +21. Improve ppc support. +22. Improve s390 support. +23. Improve spu support. +24. Improve vax support. + +Changes from binutils 2.19.51.0.2: + +1. Update from binutils 2009 0310. +2. Fix strip on common symbols in relocatable file. PR 9933. +3. Fix --enable-targets=all build. +4. Fix ia64 build with -Wformat-security. PR 9874. +5. Add REGION_ALIAS support in linker script. +6. Add think archive support to readelf. +7. Improve DWARF support in objdump. +8. Improve alpha support. +9. Improve arm support. +10. Improve hppa support. +11. Improve m68k support. +12. Improve mips support. +13. Improve ppc support. +14. Improve xtensa support. +15. Add score 7 support. + +Changes from binutils 2.19.51.0.1: + +1. Update from binutils 2009 0204. +2. Support AVX Programming Reference (January, 2009) +3. Improve .s suffix support in x86 disassembler. +4. Add --prefix/--prefix-strip for objdump -S. PR 9784. +5. Change "ld --as-needed" to resolve undefined references in DSO. +6. Add -Ttext-segment to ld to set address of text segment. +7. Fix "ld -r --gc-sections --entry" crash with COMDAT group. PR 9727. +8. Improve linker compatibility for g++ 3.4 `.gnu.linkonce.r.*. +9. Add VMS/ia64 support. +10. Improve arm support. +11. Improve cris support. +12. Improve m68k support. +13. Improve mips support. +14. Improve spu support. + +Changes from binutils 2.19.50.0.1: + +1. Update from binutils 2009 0106. +2. Support AVX Programming Reference (December, 2008) +2. Encode AVX insns with 2byte VEX prefix if possible. +4. Add .s suffix support to swap register operands to x86 assembler. +5. Properly select NOP insns for code alignment in x86 assembler. +6. Fix 2 symbol visibility linker bugs. PRs 9676/9679. +7. Fix an ia64 linker relaxation bug. PR 7036. +8. Fix a symbol versioning bug. PR 7047. +9. Fix unitialized data in linker. PR 7028. +10. Avoid a linker crash on bad input. PR 7023. +11. Fix a linker memory leak. PR 7012. +12. Fix strip/objcopy crash on PT_GNU_RELRO. PR 7011. +13. Improve MacOS support. +14. Fix a COFF linker bug. PR 6945. +15. Add LM32 support. +16. Fix various arm bugs. +17. Fix various avr bugs. +18. Fix various CR16 bugs. +19. Fix various cris bugs. +20. Fix various m32c bugs. +21. Fix various m68k bugs. +22. Fix various mips bugs. +23. Fix various ppc bugs. +24. Fix various s390 bugs. +25. Fix various sparc bugs. +26. Fix various spu bugs. +27. Fix various xtensa bugs. + +The file list: + +1. binutils-2.20.51.0.8.tar.bz2. Source code. +2. binutils-2.20.51.0.8.i686.tar.bz2. IA-32 binary tar ball for RedHat + EL 5. +3. binutils-2.20.51.0.8.ia64.tar.bz2. IA-64 binary tar ball for RedHat + EL 5. +4. binutils-2.20.51.0.8.x86_64.tar.bz2. X64_64 binary tar ball for RedHat + EL 5. + +The primary sites for the beta Linux binutils are: + +1. http://www.kernel.org/pub/linux/devel/binutils/ + +Thanks. + + +H.J. Lu +hjl.tools@gmail.com +04/13/2010 diff --git a/source/d/bison/bison.SlackBuild b/source/d/bison/bison.SlackBuild index f99d23302..d41436251 100755 --- a/source/d/bison/bison.SlackBuild +++ b/source/d/bison/bison.SlackBuild @@ -21,10 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.4.1 -ARCH=${ARCH:-x86_64} +VERSION=2.4.2 BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-bison @@ -38,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -61,7 +75,7 @@ CFLAGS="$SLKCFLAGS" \ --mandir=/usr/man \ --infodir=/usr/info -make -j3 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG find $PKG | xargs file | grep -e "executable" -e "shared object" \ @@ -73,7 +87,7 @@ gzip -9 $PKG/usr/man/man1/bison.1 mkdir -p $PKG/usr/doc/bison-$VERSION cp -a \ - ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README REFERENCES THANKS doc/FAQ \ + AUTHORS COPYING* INSTALL NEWS README REFERENCES THANKS doc/FAQ \ $PKG/usr/doc/bison-$VERSION mkdir -p $PKG/install diff --git a/source/d/clisp/clisp.SlackBuild b/source/d/clisp/clisp.SlackBuild index 49e4f768d..4d6b43f48 100755 --- a/source/d/clisp/clisp.SlackBuild +++ b/source/d/clisp/clisp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,15 +21,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.47 -DIRNAME=2.47 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +VERSION=2.48 +DIRNAME=2.48 +BUILD=${BUILD:-1} # Bundled libraries: FFCALLVER=20080704cvs -LIBSIGSEVVER=2.6 +LIBSIGSEVVER=2.8 + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -40,8 +48,13 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-clisp @@ -53,7 +66,7 @@ mkdir -p $TMP $PKG # First we need this. It used to ship with CLISP, but no longer does. cd $TMP rm -rf libsigsegv-$LIBSIGSEVVER -tar xvf $CWD/libsigsegv-$LIBSIGSEVVER.tar.bz2 || exit 1 +tar xvf $CWD/libsigsegv-$LIBSIGSEVVER.tar.?z* || exit 1 cd libsigsegv-$LIBSIGSEVVER || exit 1 chown -R root:root . find . \ diff --git a/source/d/cmake/cmake.SlackBuild b/source/d/cmake/cmake.SlackBuild index 4a05c76e9..25fd3b4f2 100755 --- a/source/d/cmake/cmake.SlackBuild +++ b/source/d/cmake/cmake.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,12 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -NAME=cmake +PKGNAM=cmake +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi -VERSION=${VERSION:-2.6.2} -ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -m32 -march=i486 -mtune=i686" @@ -33,19 +42,21 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$NAME +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $NAME-$VERSION -tar xvf $CWD/$NAME-$VERSION.tar.bz2 || exit 1 -cd $NAME-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ @@ -63,13 +74,21 @@ CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ../configure \ --prefix=/usr \ - --docdir=/doc/$NAME-$VERSION \ + --docdir=/doc/$PKGNAM-$VERSION \ $SLKCONFIGFLAGS \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ../ChangeLog.txt ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ../ChangeLog.txt | head -n 1000 > $DOCSDIR/ChangeLog.txt + touch -r ../ChangeLog.txt $DOCSDIR/ChangeLog.txt +fi + # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then ( cd $PKG/usr/man @@ -92,5 +111,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$NAME-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/d/cscope/cscope.SlackBuild b/source/d/cscope/cscope.SlackBuild index 76994691f..21e86d3f0 100755 --- a/source/d/cscope/cscope.SlackBuild +++ b/source/d/cscope/cscope.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,14 +23,24 @@ PKGNAM=cscope VERSION=${VERSION:-$(echo $(basename $(echo $PRGNAM-*.tar.bz2 | cut -f 2 -d -) .tar.bz2) | cut -f 2 -d -)} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-cscope +NUMJOBS=${NUMJOBS:-" -j7 "} + rm -rf $PKG mkdir -p $TMP $PKG @@ -47,6 +57,7 @@ find . \ ./configure \ --prefix=/usr \ + --mandir=/usr/man \ --build=${ARCH}-slackware-linux make $NUMJOBS || make || exit 1 @@ -59,9 +70,17 @@ gzip -9 $PKG/usr/man/man1/${PKGNAM}.1 mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING* INSTALL NEWS README TODO \ + AUTHORS COPYING* INSTALL NEWS README* TODO \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/d/doxygen/doxygen.SlackBuild b/source/d/doxygen/doxygen.SlackBuild index ec827f7cd..66ae4d360 100755 --- a/source/d/doxygen/doxygen.SlackBuild +++ b/source/d/doxygen/doxygen.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,18 +21,33 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.5.8 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(basename $(echo doxygen-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev) .src)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -45,7 +60,6 @@ cd $TMP rm -rf doxygen-$VERSION tar xvf $CWD/doxygen-${VERSION}.src.tar.?z* || exit 1 cd doxygen-$VERSION -zcat $CWD/doxygen.qt4.diff.gz | patch -p1 --verbose || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -53,11 +67,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# We want qt4 to be found, not qt3 if that is available as well: -unset QTDIR - CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ +QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ ./configure \ --shared \ --release \ diff --git a/source/d/doxygen/doxygen.qt4.diff b/source/d/doxygen/doxygen.qt4.diff deleted file mode 100644 index d55dced8f..000000000 --- a/source/d/doxygen/doxygen.qt4.diff +++ /dev/null @@ -1,12 +0,0 @@ -diff -up doxygen-1.5.8/configure.qt4 doxygen-1.5.8/configure ---- doxygen-1.5.8/configure.qt4 2008-12-26 20:22:39.000000000 +0100 -+++ doxygen-1.5.8/configure 2009-02-06 11:00:44.000000000 +0100 -@@ -268,7 +268,7 @@ if test "$f_wizard" = YES; then - if test -z "$QTDIR"; then - echo " QTDIR environment variable not set!" - echo -n " Checking for Qt..." -- for d in /usr/{lib,share,qt}/{qt-4,qt4,qt,qt*,4}; do -+ for d in /usr/{lib64,lib,share,qt}/{qt-4,qt4,qt,qt*,4}; do - if test -x "$d/bin/qmake"; then - QTDIR=$d - fi diff --git a/source/d/gcc/gcc.SlackBuild b/source/d/gcc/gcc.SlackBuild index cc1745aca..b11a7c6c8 100755 --- a/source/d/gcc/gcc.SlackBuild +++ b/source/d/gcc/gcc.SlackBuild @@ -2,7 +2,7 @@ # GCC package build script (written by volkerdi@slackware.com) # # Copyright 2003, 2004 Slackware Linux, Inc., Concord, California, USA -# Copyright 2005, 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005, 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -42,14 +42,24 @@ # I see no reason to continue 386 support in the latest Slackware (and indeed # it's no longer easily possible). -VERSION=4.3.3 -ARCH=${ARCH:-x86_64} -TARGET=$ARCH-slackware-linux -BUILD=${BUILD:-4} +VERSION=4.4.4 +BUILD=${BUILD:-1} # How many jobs to run in parallel: NUMJOB=" -j 4 " +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +TARGET=$ARCH-slackware-linux + if [ "$ARCH" = "i386" ]; then SLKCFLAGS="-O2 -march=i386 -mcpu=i686" LIBDIRSUFFIX="" @@ -68,6 +78,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -119,14 +132,25 @@ cp $CWD/ecj-4.3.jar gcc-$VERSION/ecj.jar find . -perm 754 -exec chmod 755 {} \; find . -perm 664 -exec chmod 644 {} \; mkdir -p $PKG1/usr/doc/gcc-$VERSION - # Only the most recent ChangeLog... shouldn't be too big. :) cp -a \ - BUGS COPYING* ChangeLog \ + BUGS COPYING* \ ChangeLog.tree-ssa FAQ INSTALL \ - LAST_UPDATED MAINTAINERS NEWS \ + LAST_UPDATED MAINTAINERS \ README* *.html \ $PKG1/usr/doc/gcc-$VERSION + # We will keep part of these, but they are really big... + if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG1/usr/doc/gcc-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog + fi + if [ -r NEWS ]; then + DOCSDIR=$(echo $PKG1/usr/doc/gcc-$VERSION) + cat NEWS | head -n 1000 > $DOCSDIR/NEWS + touch -r NEWS $DOCSDIR/NEWS + fi + mkdir -p $PKG1/usr/doc/gcc-${VERSION}/gcc ( cd gcc cp -a \ @@ -135,93 +159,123 @@ cp $CWD/ecj-4.3.jar gcc-$VERSION/ecj.jar mkdir -p $PKG3/usr/doc/gcc-${VERSION}/gcc/fortran ( cd fortran - cp -a \ - ChangeLog \ - $PKG3/usr/doc/gcc-$VERSION/gcc/fortran/ChangeLog + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG3/usr/doc/gcc-$VERSION/gcc/fortran/ChangeLog + touch -r ChangeLog $PKG3/usr/doc/gcc-$VERSION/gcc/fortran/ChangeLog + fi ) mkdir -p $PKG4/usr/doc/gcc-${VERSION}/gcc/ada ( cd ada cp -a \ - ChangeLog ChangeLog.tree-ssa \ + ChangeLog.tree-ssa \ $PKG4/usr/doc/gcc-$VERSION/gcc/ada + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG4/usr/doc/gcc-$VERSION/gcc/ada/ChangeLog + touch -r ChangeLog $PKG4/usr/doc/gcc-$VERSION/gcc/ada/ChangeLog + fi ) mkdir -p $PKG5/usr/doc/gcc-${VERSION}/gcc/java ( cd java cp -a \ - ChangeLog ChangeLog.tree-ssa \ + ChangeLog.tree-ssa \ $PKG5/usr/doc/gcc-${VERSION}/gcc/java + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG5/usr/doc/gcc-${VERSION}/gcc/java/ChangeLog + touch -r ChangeLog $PKG5/usr/doc/gcc-${VERSION}/gcc/java/ChangeLog + fi ) mkdir -p $PKG6/usr/doc/gcc-${VERSION}/gcc/objc ( cd objc cp -a \ - ChangeLog README \ + README* \ $PKG6/usr/doc/gcc-${VERSION}/gcc/objc + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG6/usr/doc/gcc-${VERSION}/gcc/objc/ChangeLog + touch -r ChangeLog $PKG6/usr/doc/gcc-${VERSION}/gcc/objc/ChangeLog + fi ) ) || exit 1 mkdir -p $PKG3/usr/doc/gcc-${VERSION}/libgfortran ( cd libgfortran - cp -a \ - ChangeLog \ - $PKG3/usr/doc/gcc-${VERSION}/libgfortran/ChangeLog + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG3/usr/doc/gcc-${VERSION}/libgfortran/ChangeLog + touch -r ChangeLog $PKG3/usr/doc/gcc-${VERSION}/libgfortran/ChangeLog + fi ) mkdir -p $PKG3/usr/doc/gcc-${VERSION}/libada ( cd libada - cp -a \ - ChangeLog \ - $PKG3/usr/doc/gcc-${VERSION}/libada + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG3/usr/doc/gcc-${VERSION}/libada/ChangeLog + touch -r ChangeLog $PKG3/usr/doc/gcc-${VERSION}/libada/ChangeLog + fi ) mkdir -p $PKG5/usr/doc/gcc-${VERSION}/libffi ( cd libffi cp -a \ - ChangeLog ChangeLog.libgcj ChangeLog.v1 \ - LICENSE README \ + ChangeLog.libgcj ChangeLog.v1 \ + LICENSE* README* \ $PKG5/usr/doc/gcc-${VERSION}/libffi + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG5/usr/doc/gcc-${VERSION}/libffi/ChangeLog + touch -r ChangeLog $PKG5/usr/doc/gcc-${VERSION}/libffi/ChangeLog + fi ) mkdir -p $PKG5/usr/doc/gcc-${VERSION}/libjava ( cd libjava cp -a \ - COPYING* ChangeLog HACKING LIBGCJ_LICENSE \ - NEWS README THANKS \ + COPYING* HACKING LIBGCJ_LICENSE \ + NEWS README* THANKS \ $PKG5/usr/doc/gcc-${VERSION}/libjava + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG5/usr/doc/gcc-${VERSION}/libjava/ChangeLog + touch -r ChangeLog $PKG5/usr/doc/gcc-${VERSION}/libjava/ChangeLog + fi ) mkdir -p $PKG1/usr/doc/gcc-${VERSION}/libmudflap ( cd libmudflap - cp -a \ - ChangeLog \ - $PKG1/usr/doc/gcc-${VERSION}/libmudflap + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG1/usr/doc/gcc-${VERSION}/libmudflap/ChangeLog + touch -r ChangeLog $PKG1/usr/doc/gcc-${VERSION}/libmudflap/ChangeLog + fi ) mkdir -p $PKG1/usr/doc/gcc-${VERSION}/libgomp ( cd libgomp - cp -a \ - ChangeLog \ - $PKG1/usr/doc/gcc-${VERSION}/libgomp + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG1/usr/doc/gcc-${VERSION}/libgomp/ChangeLog + touch -r ChangeLog $PKG1/usr/doc/gcc-${VERSION}/libgomp/ChangeLog + fi ) mkdir -p $PKG6/usr/doc/gcc-${VERSION}/libobjc ( cd libobjc + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG6/usr/doc/gcc-${VERSION}/libobjc/ChangeLog + touch -r ChangeLog $PKG6/usr/doc/gcc-${VERSION}/libobjc/ChangeLog + fi cp -a \ - ChangeLog README README.threads THREADS THREADS.MACH \ + README* THREADS* \ $PKG6/usr/doc/gcc-${VERSION}/libobjc ) mkdir -p $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3 ( cd libstdc++-v3 cp -a \ - ChangeLog README \ - $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3 - - cp -a \ + README* \ docs/html/faq \ $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3 + if [ -r ChangeLog ]; then + cat ChangeLog | head -n 1000 > $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3/ChangeLog + touch -r ChangeLog $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3/ChangeLog + fi ) ) # build gcc @@ -253,6 +307,7 @@ cp $CWD/ecj-4.3.jar gcc-$VERSION/ecj.jar --enable-threads=posix \ --enable-checking=release \ --with-system-zlib \ + --with-python-dir=/lib$LIBDIRSUFFIX/python2.6/site-packages \ --disable-libunwind-exceptions \ --enable-__cxa_atexit \ --enable-libssp \ @@ -409,6 +464,7 @@ fi # gcc-java: ( cd $PKG5 mkdir -p usr/bin + mv $PKG1/usr/bin/aot-compile usr/bin mv $PKG1/usr/bin/addr2name.awk usr/bin # mv $PKG1/usr/bin/fastjar usr/bin mv $PKG1/usr/bin/gappletviewer usr/bin @@ -430,7 +486,9 @@ fi mv $PKG1/usr/bin/jcf-dump usr/bin mv $PKG1/usr/bin/jv-* usr/bin mv $PKG1/usr/bin/rmi* usr/bin - mkdir -p usr/include + mkdir -p usr/include/c++/$VERSION + # Move some Java only C++ headers from the C++ package: + mv $PKG2/usr/include/c++/$VERSION/{gcj,gnu,java,javax,org,sun} usr/include/c++/$VERSION mv $PKG1/usr/include/ffi.h usr/include mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jawt.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include @@ -441,6 +499,12 @@ fi mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jni_md.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jvmpi.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/libffi usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include + # aot-compile Python plugins: + if [ ! -d $PKG1/usr/lib${LIBDIRSUFFIX}/python2.6 ]; then + echo "NO $PKG1/usr/lib${LIBDIRSUFFIX}/python2.6 !" + exit 1 + fi + mv $PKG1/usr/lib${LIBDIRSUFFIX}/python2.6 usr/lib${LIBDIRSUFFIX} mkdir -p usr/info mv $PKG1/usr/info/gcj.* usr/info # mv $PKG1/usr/info/fastjar.* usr/info @@ -462,6 +526,7 @@ fi mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/gcj usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include mkdir -p usr/man/man1 + mv $PKG1/usr/man/man1/aot-compile.1.gz usr/man/man1 mv $PKG1/usr/man/man1/gappletviewer.1.gz usr/man/man1 mv $PKG1/usr/man/man1/gc-analyze.1.gz usr/man/man1 mv $PKG1/usr/man/man1/gcj.1.gz usr/man/man1 @@ -471,6 +536,7 @@ fi mv $PKG1/usr/man/man1/gjar.1.gz usr/man/man1 mv $PKG1/usr/man/man1/gjarsigner.1.gz usr/man/man1 mv $PKG1/usr/man/man1/gjavah.1.gz usr/man/man1 + mv $PKG1/usr/man/man1/gjdoc.1.gz usr/man/man1 mv $PKG1/usr/man/man1/gjnih.1.gz usr/man/man1 mv $PKG1/usr/man/man1/gkeytool.1.gz usr/man/man1 mv $PKG1/usr/man/man1/gnative2ascii.1.gz usr/man/man1 @@ -483,6 +549,7 @@ fi mv $PKG1/usr/man/man1/jcf-dump.1.gz usr/man/man1 mv $PKG1/usr/man/man1/jv-convert.1.gz usr/man/man1 mv $PKG1/usr/man/man1/jv-scan.1.gz usr/man/man1 + mv $PKG1/usr/man/man1/rebuild-gcj-db.1.gz usr/man/man1 mkdir -p usr/share mv $PKG1/usr/share/java usr/share ) diff --git a/source/d/gdb/gdb.SlackBuild b/source/d/gdb/gdb.SlackBuild index ea55ec9dd..cad8c97ce 100755 --- a/source/d/gdb/gdb.SlackBuild +++ b/source/d/gdb/gdb.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-6.8} -ARCH=${ARCH:-x86_64} +PKGNAM=gdb +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" @@ -41,7 +52,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf gdb-$VERSION -tar xvf $CWD/gdb-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/gdb-$VERSION.tar.?z* || exit 1 cd gdb-$VERSION || exit 1 chown -R root:root . find . \ @@ -75,7 +86,7 @@ rm -f $PKG/usr/bin/gdbtui $PKG/usr/man/man1/gdbtui.1* mkdir -p $PKG/usr/doc/gdb-$VERSION/gdb cp -a COPYING* README $PKG/usr/doc/gdb-$VERSION cd gdb -cp -a NEWS README TODO $PKG/usr/doc/gdb-$VERSION/gdb +cp -a NEWS README $PKG/usr/doc/gdb-$VERSION/gdb cp -a gdbserver/README $PKG/usr/doc/gdb-$VERSION/README.gdbserver find $PKG/usr/doc/gdb-$VERSION -type f -exec chmod 644 {} \; diff --git a/source/d/git/git-1.7.1.tar.sign b/source/d/git/git-1.7.1.tar.sign new file mode 100644 index 000000000..57c6f6975 --- /dev/null +++ b/source/d/git/git-1.7.1.tar.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBL0lwtyGugalF9Dw4RAtrvAKCGeAZD3xiFceJH1b9YUEgIdo0S9QCfVoJM +Yp82hUEP7iNvKovjEKccemc= +=zw7F +-----END PGP SIGNATURE----- diff --git a/source/d/git/git.SlackBuild b/source/d/git/git.SlackBuild index bf00fcaed..7c8e9e34f 100755 --- a/source/d/git/git.SlackBuild +++ b/source/d/git/git.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,22 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.6.4 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-1} + +PKGNAM=git +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + eval $(perl '-V:installvendorlib') PERLDIR=$installvendorlib/$ARCH-linux-thread-multi/auto @@ -42,6 +54,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -70,6 +84,7 @@ cp -a \ contrib \ $PKG/usr/doc/git-$VERSION ( cd $PKG/usr/doc/git-$VERSION/Documentation ; rm *.1 *.3 *.7 ) +( cd $PKG/usr/doc/git-$VERSION && find . -name ".git*" -exec rm -r "{}" \; ) make $NUMJOBS \ prefix=/usr \ diff --git a/source/d/guile/guile.SlackBuild b/source/d/guile/guile.SlackBuild index 79ad575d2..ec6cd977c 100755 --- a/source/d/guile/guile.SlackBuild +++ b/source/d/guile/guile.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,17 @@ VERSION=1.8.7 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -31,7 +40,7 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-guile rm -rf $PKG -mkdir -p $TMP $PKG/usr +mkdir -p $PKG/usr if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,6 +51,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP @@ -61,7 +73,7 @@ CFLAGS="$SLKCFLAGS" \ --infodir=/usr/info \ --mandir=/usr/man \ --with-threads \ - $ARCH-slackware-linux + --build=$ARCH-slackware-linux # Does not like parallel make... make $NUMJOBS || make || exit 1 diff --git a/source/d/intltool/intltool.SlackBuild b/source/d/intltool/intltool.SlackBuild index 5afd3e154..1588d50fa 100755 --- a/source/d/intltool/intltool.SlackBuild +++ b/source/d/intltool/intltool.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,16 +22,24 @@ PKGNAM=intltool -VERSION=0.40.5 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -39,11 +47,15 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -99,6 +111,14 @@ cp -a \ AUTHORS COPYING* INSTALL NEWS README* TODO \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/d/libtool/libtool.SlackBuild b/source/d/libtool/libtool.SlackBuild index fb833a720..75a0ff2c1 100755 --- a/source/d/libtool/libtool.SlackBuild +++ b/source/d/libtool/libtool.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -9,7 +9,7 @@ # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, @@ -20,11 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +VERSION=${VERSION:-$(echo libtool-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} -VERSION=1.5.26 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -36,20 +45,21 @@ if [ "$ARCH" = "i486" ]; then elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP rm -rf libtool-$VERSION + tar xvf $CWD/libtool-$VERSION.tar.?z* || exit 1 + cd libtool-$VERSION chown -R root:root . find . \ @@ -60,7 +70,6 @@ find . \ zcat $CWD/libtool.no.moved.warning.diff.gz | patch -p1 --verbose || exit 1 - CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ @@ -70,7 +79,7 @@ CFLAGS="$SLKCFLAGS" \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 +make install DESTDIR=$PKG find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -81,12 +90,12 @@ gzip -9 $PKG/usr/info/* mkdir -p $PKG/usr/doc/libtool-$VERSION cp -a \ AUTHORS COPYING NEWS README THANKS TODO \ - $PKG/usr/doc/libtool-$VERSION + $PKG/usr/doc/libtool-$VERSION mkdir $PKG/install zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/libtool-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/libtool-${VERSION}-$ARCH-$BUILD.txz diff --git a/source/d/libtool/libtool.no.moved.warning.diff b/source/d/libtool/libtool.no.moved.warning.diff index e5197b5c6..f6a82285a 100644 --- a/source/d/libtool/libtool.no.moved.warning.diff +++ b/source/d/libtool/libtool.no.moved.warning.diff @@ -1,32 +1,44 @@ -diff -Nur libtool-1.5.26.orig/libltdl/ltmain.sh libtool-1.5.26/libltdl/ltmain.sh ---- libtool-1.5.26.orig/libltdl/ltmain.sh 2008-02-01 10:39:51.000000000 -0600 -+++ libtool-1.5.26/libltdl/ltmain.sh 2008-10-01 13:59:24.654020673 -0500 -@@ -2952,9 +2952,9 @@ - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi -- if test "$absdir" != "$libdir"; then -- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 -- fi -+ #if test "$absdir" != "$libdir"; then -+ # $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 -+ #fi - path="$absdir" +--- ./libltdl/config/ltmain.m4sh.orig 2009-11-16 07:17:22.000000000 -0600 ++++ ./libltdl/config/ltmain.m4sh 2010-02-06 18:13:00.000000000 -0600 +@@ -4965,7 +4965,7 @@ + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- func_warning "library \`$lib' was moved." ++ # func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" +@@ -5496,8 +5496,8 @@ + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" +- test "$absdir" != "$libdir" && \ +- func_warning "\`$deplib' seems to be moved" ++ # test "$absdir" != "$libdir" && \ ++ # func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" fi - depdepl= -diff -Nur libtool-1.5.26.orig/ltmain.sh libtool-1.5.26/ltmain.sh ---- libtool-1.5.26.orig/ltmain.sh 2008-02-01 10:39:51.000000000 -0600 -+++ libtool-1.5.26/ltmain.sh 2008-10-01 13:59:24.690024584 -0500 -@@ -2952,9 +2952,9 @@ - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi -- if test "$absdir" != "$libdir"; then -- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 -- fi -+ #if test "$absdir" != "$libdir"; then -+ # $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 -+ #fi - path="$absdir" +--- ./libltdl/config/ltmain.sh.orig 2009-11-16 07:23:18.000000000 -0600 ++++ ./libltdl/config/ltmain.sh 2010-02-06 18:13:26.000000000 -0600 +@@ -5407,7 +5407,7 @@ + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- func_warning "library \`$lib' was moved." ++ # func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" +@@ -5938,8 +5938,8 @@ + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" +- test "$absdir" != "$libdir" && \ +- func_warning "\`$deplib' seems to be moved" ++ # test "$absdir" != "$libdir" && \ ++ # func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" fi - depdepl= diff --git a/source/d/m4/m4.SlackBuild b/source/d/m4/m4.SlackBuild index 06c73757e..f74e022fd 100755 --- a/source/d/m4/m4.SlackBuild +++ b/source/d/m4/m4.SlackBuild @@ -20,11 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.4.13 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=1.4.14 BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-m4 @@ -38,6 +48,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -97,12 +110,8 @@ fi #cat src/m4 > $PKG/usr/bin/m4 #chmod 755 $PKG/usr/bin/* -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ - xargs strip --strip-unneeded 2> /dev/null || true - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ - xargs strip --strip-unneeded 2> /dev/null -) +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null mkdir -p $PKG/usr/doc/m4-$VERSION cp -a \ @@ -110,7 +119,7 @@ cp -a \ $PKG/usr/doc/m4-$VERSION head -n 357 ChangeLog > $PKG/usr/doc/m4-$VERSION/ChangeLog touch -r ChangeLog $PKG/usr/doc/m4-$VERSION/ChangeLog -chmod 644 $PKG/usr/doc/m4-$VERSION/COPYING* +chmod 0644 $PKG/usr/doc/m4-$VERSION/COPYING* mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/d/perl/doinst.sh b/source/d/mercurial/doinst.sh index 8d2debb06..4cefcc343 100644 --- a/source/d/perl/doinst.sh +++ b/source/d/mercurial/doinst.sh @@ -1,4 +1,3 @@ -#!/bin/sh config() { NEW="$1" OLD="`dirname $NEW`/`basename $NEW .new`" @@ -10,4 +9,5 @@ config() { fi # Otherwise, we leave the .new copy for the admin to consider... } -config usr/lib/perl5/5.10.0/i486-linux-thread-multi/perllocal.pod.new +config etc/mercurial/hgrc.d/hgk.rc.new +rm -f etc/mercurial/hgrc.d/hgk.rc.new diff --git a/source/d/mercurial/mercurial.SlackBuild b/source/d/mercurial/mercurial.SlackBuild index 88ccc969f..0069eac2b 100755 --- a/source/d/mercurial/mercurial.SlackBuild +++ b/source/d/mercurial/mercurial.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.2.1 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo mercurial-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-mercurial @@ -33,7 +42,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf mercurial-$VERSION -tar xvf $CWD/mercurial-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/mercurial-$VERSION.tar.?z* || exit 1 cd mercurial-$VERSION chown -R root.root . find . \ @@ -44,6 +53,36 @@ find . \ python setup.py build install --root=$PKG || exit 1 +# Ordinarily we will not add stuff that's not installed through the normal +# default installation method, but we've had a lot of requests, and it appears +# that installing at least the hgk extension is the ad-hoc standard. +mkdir -p $PKG/usr/libexec/mercurial +cp -a contrib/hgk $PKG/usr/libexec/mercurial +chmod 0755 $PKG/usr/libexec/mercurial/hgk + +mkdir -p $PKG/etc/mercurial/hgrc.d +cat << EOF > $PKG/etc/mercurial/hgrc.d/hgk.rc.new +[extensions] +# enable hgk extension ('hg help' shows 'view' as a command) +hgk = +[hgk] + +path=/usr/libexec/mercurial/hgk +EOF + +# Bash and zsh completion: +mkdir -p $PKG/etc/bash_completion.d +cp -a contrib/bash_completion $PKG/etc/bash_completion.d/mercurial.sh +chmod 644 $PKG/etc/bash_completion.d/mercurial.sh +mkdir -p $PKG/usr/share/zsh/site-functions +cp -a contrib/zsh_completion $PKG/usr/share/zsh/site-functions/_mercurial +chmod 644 $PKG/usr/share/zsh/site-functions/_mercurial + +# Emacs Lisp extensions: +mkdir -p $PKG/usr/share/emacs/site-lisp +cp -a contrib/mercurial.el contrib/mq.el $PKG/usr/share/emacs/site-lisp +chmod 644 $PKG/usr/share/emacs/site-lisp/* + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -62,6 +101,7 @@ cp -a \ $PKG/usr/doc/mercurial-$VERSION mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG diff --git a/source/d/nasm/nasm.SlackBuild b/source/d/nasm/nasm.SlackBuild index 27cbc57cd..73e1e37a8 100755 --- a/source/d/nasm/nasm.SlackBuild +++ b/source/d/nasm/nasm.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.05.01 -ARCH=${ARCH:-x86_64} +VERSION=2.07 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" else diff --git a/source/d/oprofile/oprofile.SlackBuild b/source/d/oprofile/oprofile.SlackBuild index 28feae4ab..8a9d2bef5 100755 --- a/source/d/oprofile/oprofile.SlackBuild +++ b/source/d/oprofile/oprofile.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.9.4 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo oprofile-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -52,8 +61,13 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 rm -rf oprofile-$VERSION -tar xvf $CWD/oprofile-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/oprofile-$VERSION.tar.?z* || exit 1 cd oprofile-$VERSION + +zcat $CWD/oprofile.qt4.diff.gz | patch -p1 --verbose || exit 1 + +./autogen.sh + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -72,21 +86,46 @@ CXXFLAGS="$SLKCFLAGS" \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + # This seems misplaced, and isn't referenced by any binaries or other files. # I'm tempted to think it shouldn't have been installed, but will just move it: if [ -r $PKG/usr/share/mangled-name ]; then mv $PKG/usr/share/mangled-name $PKG/usr/share/oprofile/mangled-name fi -( cd $PKG/usr/bin - strip --strip-unneeded * -) + mv $PKG/usr/share/doc $PKG/usr mv $PKG/usr/doc/oprofile $PKG/usr/doc/oprofile-$VERSION cp -a \ COPYING README TODO \ $PKG/usr/doc/oprofile-$VERSION -gzip -9 $PKG/usr/man/man?/* +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/d/oprofile/oprofile.qt4.diff b/source/d/oprofile/oprofile.qt4.diff new file mode 100644 index 000000000..e5506a82e --- /dev/null +++ b/source/d/oprofile/oprofile.qt4.diff @@ -0,0 +1,3194 @@ +commit 4513fe62e4517057374091092073e0940584ebe2 +Author: Tobias Doerffel <tobias.doerffel@gmail.com> +Date: Mon Jun 29 12:05:49 2009 +0200 + + Port GUI to Qt4 + +diff --git a/configure.in b/configure.in +index 6f684a0..883a7ad 100644 +--- a/configure.in ++++ b/configure.in +@@ -131,7 +131,7 @@ ORIG_X_SAVE_LIBS="$LIBS" + LIBS="$X_PRE_LIBS $LIBS $X_LIBS -lX11 $X_EXTRA_LIBS" + X_LIBS="$LIBS" + AC_SUBST(X_LIBS) +-QT_DO_IT_ALL ++QT4_DO_IT_ALL + LIBS="$ORIG_X_SAVE_LIBS" + + dnl enable pch for c++ +@@ -155,7 +155,7 @@ AC_SUBST(POPT_LIBS) + + # do NOT put tests here, they will fail in the case X is not installed ! + +-AM_CONDITIONAL(have_qt, test -n "$QT_LIB") ++AM_CONDITIONAL(have_qt, test -n "$QT4_LIB") + + AX_CFLAGS_OPTION(OP_CFLAGS,[-W]) + AX_CXXFLAGS_OPTION(OP_CXXFLAGS,[-W]) +@@ -258,7 +258,6 @@ AC_OUTPUT(Makefile \ + opjitconv/Makefile \ + pp/Makefile \ + gui/Makefile \ +- gui/ui/Makefile \ + module/Makefile \ + module/x86/Makefile \ + module/ia64/Makefile \ +@@ -268,8 +267,8 @@ AC_OUTPUT(Makefile \ + + AX_COPY_IF_CHANGE(doc/xsl/catalog-1.xml, doc/xsl/catalog.xml) + +-if test -z "$QT_LIB"; then +- echo "Warning: a working Qt not found; no GUI will be built" ++if test -z "$QT4_LIB"; then ++ echo "Warning: a working Qt4 not found; no GUI will be built" + fi + + if test "`getent passwd oprofile 2>/dev/null`" == "" || \ +diff --git a/gui/Makefile.am b/gui/Makefile.am +index ba5e27c..69e01dd 100644 +--- a/gui/Makefile.am ++++ b/gui/Makefile.am +@@ -1,5 +1,3 @@ +-SUBDIRS = ui +- + dist_sources = \ + oprof_start.cpp \ + oprof_start_config.cpp \ +@@ -14,7 +12,7 @@ EXTRA_DIST = $(dist_sources) + if have_qt + + AM_CPPFLAGS = \ +- @QT_INCLUDES@ \ ++ @QT4_INCLUDES@ \ + -I ${top_srcdir}/libop \ + -I ${top_srcdir}/libutil++ \ + -I ${top_srcdir}/libutil +@@ -25,19 +23,22 @@ bin_PROGRAMS = oprof_start + + oprof_start_SOURCES = $(dist_sources) + nodist_oprof_start_SOURCES = oprof_start.moc.cpp ++BUILT_SOURCES = ui_oprof_start.base.h + oprof_start_LDADD = \ + ../libutil++/libutil++.a \ + ../libop/libop.a \ + ../libutil/libutil.a \ +- ui/liboprof_start.a \ +- @QT_LDFLAGS@ \ +- @QT_LIB@ \ ++ @QT4_LDFLAGS@ \ ++ @QT4_LIB@ -lQt3Support \ + @X_LIBS@ + + oprof_start.moc.cpp: ${top_srcdir}/gui/oprof_start.h +- $(MOC) -o $@ ${top_srcdir}/gui/oprof_start.h ++ $(MOC4) -o $@ ${top_srcdir}/gui/oprof_start.h ++ ++ui_oprof_start.base.h: ${top_srcdir}/gui/ui/oprof_start.base.ui ++ $(UIC4) -o $@ $< + + clean-local: +- rm -f oprof_start.moc.cpp ++ rm -f oprof_start.moc.cpp ui_oprof_start.base.h + + endif +diff --git a/gui/oprof_start.cpp b/gui/oprof_start.cpp +index 0387136..615c8d7 100644 +--- a/gui/oprof_start.cpp ++++ b/gui/oprof_start.cpp +@@ -23,7 +23,6 @@ + #include <qlineedit.h> + #include <qlistview.h> + #include <qcombobox.h> +-#include <qlistbox.h> + #include <qfiledialog.h> + #include <qbuttongroup.h> + #include <qcheckbox.h> +@@ -32,7 +31,8 @@ + #include <qvalidator.h> + #include <qlabel.h> + #include <qpushbutton.h> +-#include <qheader.h> ++#include <Qt3Support/Q3ListBox> ++#include <Qt3Support/Q3Header> + + #include "config.h" + #include "oprof_start.h" +@@ -106,12 +106,15 @@ op_event_descr::op_event_descr() + + oprof_start::oprof_start() + : +- oprof_start_base(0, 0, false, 0), ++ QDialog(0), ++ oprof_start_base(), + event_count_validator(new QIntValidator(event_count_edit)), + current_event(0), + cpu_speed(op_cpu_frequency()), + total_nr_interrupts(0) + { ++ setupUi( this ); ++ + green_pixmap = new QPixmap(green_xpm); + red_pixmap = new QPixmap(red_xpm); + vector<string> args; +@@ -124,7 +127,7 @@ oprof_start::oprof_start() + op_nr_counters = op_get_nr_counters(cpu_type); + + if (cpu_type == CPU_TIMER_INT) { +- setup_config_tab->removePage(counter_setup_page); ++ setup_config_tab->removeTab(setup_config_tab->indexOf(counter_setup_page)); + } else { + fill_events(); + } +@@ -268,12 +271,12 @@ void oprof_start::fill_events() + namespace { + + /// find the first item with the given text in column 0 or return NULL +-QListViewItem * findItem(QListView * view, char const * name) ++Q3ListViewItem * findItem(Q3ListView * view, char const * name) + { +- // Qt 2.3.1 does not have QListView::findItem() +- QListViewItem * item = view->firstChild(); ++ // Qt 2.3.1 does not have Q3ListView::findItem() ++ Q3ListViewItem * item = view->firstChild(); + +- while (item && strcmp(item->text(0).latin1(), name)) ++ while (item && strcmp(item->text(0).toLatin1().constData(), name)) + item = item->nextSibling(); + + return item; +@@ -292,7 +295,7 @@ void oprof_start::setup_default_event() + event_cfgs[descr.name].user_ring_count = 1; + event_cfgs[descr.name].os_ring_count = 1; + +- QListViewItem * item = findItem(events_list, descr.name); ++ Q3ListViewItem * item = findItem(events_list, descr.name); + if (item) + item->setSelected(true); + } +@@ -349,7 +352,7 @@ void oprof_start::read_set_events() + event_cfgs[ev_name].os_ring_count = 1; + } + +- QListViewItem * item = findItem(events_list, ev_name.c_str()); ++ Q3ListViewItem * item = findItem(events_list, ev_name.c_str()); + if (item) + item->setSelected(true); + } +@@ -436,7 +439,7 @@ void oprof_start::fill_events_listbox() + + for (vector<op_event_descr>::reverse_iterator cit = v_events.rbegin(); + cit != v_events.rend(); ++cit) { +- new QListViewItem(events_list, cit->name.c_str()); ++ new Q3ListViewItem(events_list, cit->name.c_str()); + } + + setUpdatesEnabled(true); +@@ -467,7 +470,7 @@ void oprof_start::display_event(op_event_descr const & descr) + } + + +-bool oprof_start::is_selectable_event(QListViewItem * item) ++bool oprof_start::is_selectable_event(Q3ListViewItem * item) + { + if (item->isSelected()) + return true; +@@ -486,7 +489,7 @@ bool oprof_start::is_selectable_event(QListViewItem * item) + + void oprof_start::draw_event_list() + { +- QListViewItem * cur; ++ Q3ListViewItem * cur; + for (cur = events_list->firstChild(); cur; cur = cur->nextSibling()) { + if (is_selectable_event(cur)) + cur->setPixmap(0, *green_pixmap); +@@ -500,9 +503,9 @@ bool oprof_start::alloc_selected_events() const + { + vector<op_event const *> events; + +- set<QListViewItem *>::const_iterator it; ++ set<Q3ListViewItem *>::const_iterator it; + for (it = selected_events.begin(); it != selected_events.end(); ++it) +- events.push_back(find_event_by_name((*it)->text(0).latin1(),0,0)); ++ events.push_back(find_event_by_name((*it)->text(0).toLatin1().constData(),0,0)); + + size_t * map = + map_event_to_counter(&events[0], events.size(), cpu_type); +@@ -520,24 +523,24 @@ void oprof_start::event_selected() + // (de)selected item so we record a set of selected items and diff + // it in the appropriate way with the previous list of selected items. + +- set<QListViewItem *> current_selection; +- QListViewItem * cur; ++ set<Q3ListViewItem *> current_selection; ++ Q3ListViewItem * cur; + for (cur = events_list->firstChild(); cur; cur = cur->nextSibling()) { + if (cur->isSelected()) + current_selection.insert(cur); + } + + // First remove the deselected item. +- vector<QListViewItem *> new_deselected; ++ vector<Q3ListViewItem *> new_deselected; + set_difference(selected_events.begin(), selected_events.end(), + current_selection.begin(), current_selection.end(), + back_inserter(new_deselected)); +- vector<QListViewItem *>::const_iterator it; ++ vector<Q3ListViewItem *>::const_iterator it; + for (it = new_deselected.begin(); it != new_deselected.end(); ++it) + selected_events.erase(*it); + + // Now try to add the newly selected item if enough HW resource exists +- vector<QListViewItem *> new_selected; ++ vector<Q3ListViewItem *> new_selected; + set_difference(current_selection.begin(), current_selection.end(), + selected_events.begin(), selected_events.end(), + back_inserter(new_selected)); +@@ -554,26 +557,26 @@ void oprof_start::event_selected() + draw_event_list(); + + if (current_event) +- display_event(locate_event(current_event->text(0).latin1())); ++ display_event(locate_event(current_event->text(0).toLatin1().constData())); + } + + +-void oprof_start::event_over(QListViewItem * item) ++void oprof_start::event_over(Q3ListViewItem * item) + { +- op_event_descr const & descr = locate_event(item->text(0).latin1()); ++ op_event_descr const & descr = locate_event(item->text(0).toLatin1().constData()); + + string help_str = descr.help_str.c_str(); + if (!is_selectable_event(item)) { + help_str += " conflicts with:"; + +- set<QListViewItem *>::const_iterator it; ++ set<Q3ListViewItem *>::const_iterator it; + for (it = selected_events.begin(); + it != selected_events.end(); ) { +- QListViewItem * temp = *it; ++ Q3ListViewItem * temp = *it; + selected_events.erase(it++); + if (is_selectable_event(item)) { + help_str += " "; +- help_str += temp->text(0).latin1(); ++ help_str += temp->text(0).toLatin1().constData(); + } + selected_events.insert(temp); + } +@@ -586,7 +589,7 @@ void oprof_start::event_over(QListViewItem * item) + /// select the kernel image filename + void oprof_start::choose_kernel_filename() + { +- string name = kernel_filename_edit->text().latin1(); ++ string name = kernel_filename_edit->text().toLatin1().constData(); + string result = do_open_file_or_dir(name, false); + + if (!result.empty()) +@@ -601,7 +604,7 @@ void oprof_start::record_selected_event_config() + if (!current_event) + return; + +- string name(current_event->text(0).latin1()); ++ string name(current_event->text(0).toLatin1().constData()); + + event_setting & cfg = event_cfgs[name]; + op_event_descr const & curr = locate_event(name); +@@ -617,7 +620,7 @@ void oprof_start::record_selected_event_config() + // are not sufficient to do the validation) + bool oprof_start::record_config() + { +- config.kernel_filename = kernel_filename_edit->text().latin1(); ++ config.kernel_filename = kernel_filename_edit->text().toLatin1().constData(); + config.no_kernel = no_vmlinux->isChecked(); + + uint temp = buffer_size_edit->text().toUInt(); +@@ -824,7 +827,7 @@ uint oprof_start::max_perf_count() const + } + + +-void oprof_start::on_flush_profiler_data() ++void oprof_start::flush_profiler_data() + { + vector<string> args; + args.push_back("--dump"); +@@ -837,14 +840,14 @@ void oprof_start::on_flush_profiler_data() + + + // user is happy of its setting. +-void oprof_start::on_start_profiler() ++void oprof_start::start_profiler() + { + // save the current settings + record_selected_event_config(); + + bool one_enable = false; + +- QListViewItem * cur; ++ Q3ListViewItem * cur; + for (cur = events_list->firstChild(); cur; cur = cur->nextSibling()) { + if (!cur->isSelected()) + continue; +@@ -852,9 +855,9 @@ void oprof_start::on_start_profiler() + // the missing reference is intended: gcc 2.91.66 can compile + // "op_event_descr const & descr = ..." w/o a warning + op_event_descr const descr = +- locate_event(cur->text(0).latin1()); ++ locate_event(cur->text(0).toLatin1().constData()); + +- event_setting & cfg = event_cfgs[cur->text(0).latin1()]; ++ event_setting & cfg = event_cfgs[cur->text(0).toLatin1().constData()]; + + one_enable = true; + +@@ -909,7 +912,7 @@ void oprof_start::on_start_profiler() + return; + + // this flush profiler data also. +- on_stop_profiler(); ++ stop_profiler(); + } + + vector<string> args; +@@ -946,15 +949,15 @@ bool oprof_start::save_config() + vector<string> tmpargs; + tmpargs.push_back("--setup"); + +- QListViewItem * cur; ++ Q3ListViewItem * cur; + for (cur = events_list->firstChild(); cur; cur = cur->nextSibling()) { + if (!cur->isSelected()) + continue; + +- event_setting & cfg = event_cfgs[cur->text(0).latin1()]; ++ event_setting & cfg = event_cfgs[cur->text(0).toLatin1().constData()]; + + op_event_descr const & descr = +- locate_event(cur->text(0).latin1()); ++ locate_event(cur->text(0).toLatin1().constData()); + + one_enabled = true; + +@@ -1016,7 +1019,7 @@ bool oprof_start::save_config() + + + // flush and stop the profiler if it was started. +-void oprof_start::on_stop_profiler() ++void oprof_start::stop_profiler() + { + vector<string> args; + args.push_back("--shutdown"); +@@ -1030,13 +1033,13 @@ void oprof_start::on_stop_profiler() + } + + +-void oprof_start::on_separate_kernel_cb_changed(int state) ++void oprof_start::separate_kernel_cb_changed(int state) + { + if (state == 2) + separate_lib_cb->setChecked(true); + } + +-void oprof_start::on_reset_sample_files() ++void oprof_start::reset_sample_files() + { + int ret = QMessageBox::warning(this, 0, "Are you sure you want to " + "reset your last profile session ?", "Yes", "No", 0, 0, 1); +diff --git a/gui/oprof_start.h b/gui/oprof_start.h +index c2910ee..a2c5eb5 100644 +--- a/gui/oprof_start.h ++++ b/gui/oprof_start.h +@@ -16,13 +16,16 @@ + #include <map> + #include <set> + +-#include "ui/oprof_start.base.h" ++#include <QtGui/QDialog> ++class QColorGroup; ++ ++#include "ui_oprof_start.base.h" + #include "oprof_start_config.h" + + #include "op_events.h" + + class QIntValidator; +-class QListViewItem; ++class Q3ListViewItem; + class QTimerEvent; + + /// a struct describing a particular event type +@@ -43,7 +46,7 @@ struct op_event_descr { + uint min_count; + }; + +-class oprof_start : public oprof_start_base ++class oprof_start : public QDialog, public Ui::oprof_start_base + { + Q_OBJECT + +@@ -54,19 +57,19 @@ protected slots: + /// select the kernel image filename + void choose_kernel_filename(); + /// flush profiler +- void on_flush_profiler_data(); ++ void flush_profiler_data(); + /// start profiler +- void on_start_profiler(); ++ void start_profiler(); + /// stop profiler +- void on_stop_profiler(); ++ void stop_profiler(); + /// events selection change + void event_selected(); + /// the mouse is over an event +- void event_over(QListViewItem *); ++ void event_over(Q3ListViewItem *); + /// state of separate_kernel_cb changed +- void on_separate_kernel_cb_changed(int); ++ void separate_kernel_cb_changed(int); + /// reset sample files +- void on_reset_sample_files(); ++ void reset_sample_files(); + + /// close the dialog + void accept(); +@@ -121,7 +124,7 @@ private: + void draw_event_list(); + + /// return true if item is selectable or already selected +- bool is_selectable_event(QListViewItem * item); ++ bool is_selectable_event(Q3ListViewItem * item); + + /// try to alloc counters for the selected_events + bool alloc_selected_events() const; +@@ -139,8 +142,8 @@ private: + /// The currently selected events. We must track this because + /// with multiple selection listbox QT doesn't allow to know + /// what is the last selected item. events_selected() update it +- std::set<QListViewItem *> selected_events; +- QListViewItem * current_event; ++ std::set<Q3ListViewItem *> selected_events; ++ Q3ListViewItem * current_event; + + /// current config + config_setting config; +diff --git a/gui/oprof_start_main.cpp b/gui/oprof_start_main.cpp +index 44da5de..4930d9a 100644 +--- a/gui/oprof_start_main.cpp ++++ b/gui/oprof_start_main.cpp +@@ -19,7 +19,7 @@ int main(int argc, char* argv[]) + + oprof_start* dlg = new oprof_start(); + +- a.setMainWidget(dlg); ++ a.setActiveWindow(dlg); + + dlg->show(); + +diff --git a/gui/oprof_start_util.cpp b/gui/oprof_start_util.cpp +index d293431..17359ae 100644 +--- a/gui/oprof_start_util.cpp ++++ b/gui/oprof_start_util.cpp +@@ -293,17 +293,16 @@ string const do_open_file_or_dir(string const & base_dir, bool dir_only) + QString result; + + if (dir_only) { +- result = QFileDialog::getExistingDirectory(base_dir.c_str(), 0, +- "open_file_or_dir", "Get directory name", true); ++ result = QFileDialog::getExistingDirectory(NULL, "Get directory name", ++ base_dir.c_str(), QFileDialog::ShowDirsOnly); + } else { +- result = QFileDialog::getOpenFileName(base_dir.c_str(), 0, 0, +- "open_file_or_dir", "Get filename"); ++ result = QFileDialog::getOpenFileName(NULL, "Get filename", base_dir.c_str()); + } + + if (result.isNull()) + return string(); + else +- return result.latin1(); ++ return result.toLatin1().constData(); + } + + /** +diff --git a/gui/ui/oprof_start.base.ui b/gui/ui/oprof_start.base.ui +index 4fcc43f..b882656 100644 +--- a/gui/ui/oprof_start.base.ui ++++ b/gui/ui/oprof_start.base.ui +@@ -1,1190 +1,1055 @@ +-<!DOCTYPE UI><UI> +-<class>oprof_start_base</class> +-<widget> +- <class>QDialog</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>oprof_start_base</cstring> +- </property> +- <property stdset="1"> +- <name>geometry</name> +- <rect> +- <x>0</x> +- <y>0</y> +- <width>625</width> +- <height>735</height> +- </rect> +- </property> +- <property stdset="1"> +- <name>caption</name> +- <string>Start profiler</string> +- </property> +- <property stdset="1"> +- <name>sizeGripEnabled</name> +- <bool>true</bool> +- </property> +- <vbox> +- <property stdset="1"> +- <name>margin</name> +- <number>11</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QTabWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>setup_config_tab</cstring> ++<?xml version="1.0" encoding="UTF-8"?> ++<ui version="4.0"> ++ <class>oprof_start_base</class> ++ <widget class="QDialog" name="oprof_start_base"> ++ <property name="geometry"> ++ <rect> ++ <x>0</x> ++ <y>0</y> ++ <width>625</width> ++ <height>735</height> ++ </rect> ++ </property> ++ <property name="windowTitle"> ++ <string>Start profiler</string> ++ </property> ++ <property name="sizeGripEnabled"> ++ <bool>true</bool> ++ </property> ++ <layout class="QVBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>11</number> ++ </property> ++ <item> ++ <widget class="QTabWidget" name="setup_config_tab"> ++ <widget class="QWidget" name="counter_setup_page"> ++ <attribute name="title"> ++ <string>&Setup</string> ++ </attribute> ++ <layout class="QVBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>11</number> ++ </property> ++ <item> ++ <widget class="Q3GroupBox" name="counter_group"> ++ <property name="title"> ++ <string>Events</string> ++ </property> ++ <layout class="QVBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>11</number> ++ </property> ++ <item> ++ <layout class="QHBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> + </property> +- <widget> +- <class>QWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>counter_setup_page</cstring> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <item> ++ <widget class="Q3ListView" name="events_list"> ++ <property name="minimumSize"> ++ <size> ++ <width>250</width> ++ <height>0</height> ++ </size> ++ </property> ++ <property name="toolTip"> ++ <string>Available events</string> ++ </property> ++ <property name="selectionMode"> ++ <enum>Q3ListView::Multi</enum> ++ </property> ++ <column> ++ <property name="text"> ++ <string>Removedincode</string> ++ </property> ++ <property name="clickable"> ++ <bool>false</bool> ++ </property> ++ <property name="resizable"> ++ <bool>true</bool> ++ </property> ++ </column> ++ </widget> ++ </item> ++ <item> ++ <layout class="QVBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <item> ++ <widget class="QCheckBox" name="os_ring_count_cb"> ++ <property name="toolTip"> ++ <string>Profile kernel code</string> + </property> +- <attribute> +- <name>title</name> +- <string>&Setup</string> +- </attribute> +- <vbox> +- <property stdset="1"> +- <name>margin</name> +- <number>11</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QGroupBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>counter_group</cstring> +- </property> +- <property stdset="1"> +- <name>title</name> +- <string>Events</string> +- </property> +- <vbox> +- <property stdset="1"> +- <name>margin</name> +- <number>11</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout10</cstring> +- </property> +- <hbox> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QListView</class> +- <column> +- <property> +- <name>text</name> +- <string>Removedincode</string> +- </property> +- <property> +- <name>clickable</name> +- <bool>false</bool> +- </property> +- <property> +- <name>resizeable</name> +- <bool>true</bool> +- </property> +- </column> +- <property stdset="1"> +- <name>name</name> +- <cstring>events_list</cstring> +- </property> +- <property stdset="1"> +- <name>minimumSize</name> +- <size> +- <width>250</width> +- <height>0</height> +- </size> +- </property> +- <property stdset="1"> +- <name>selectionMode</name> +- <enum>Multi</enum> +- </property> +- <property> +- <name>toolTip</name> +- <string>Available events</string> +- </property> +- </widget> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout9</cstring> +- </property> +- <vbox> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>os_ring_count_cb</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Profile &kernel</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>Profile kernel code</string> +- </property> +- </widget> +- <widget> +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>user_ring_count_cb</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Profile &user binaries</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>Profile user libraries and applications</string> +- </property> +- </widget> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout16</cstring> +- </property> +- <hbox> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>TextLabel1_2</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>C&ount</string> +- </property> +- <property> +- <name>buddy</name> +- <cstring>event_count_edit</cstring> +- </property> +- </widget> +- <widget> +- <class>QLineEdit</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>event_count_edit</cstring> +- </property> +- <property stdset="1"> +- <name>sizePolicy</name> +- <sizepolicy> +- <hsizetype>1</hsizetype> +- <vsizetype>0</vsizetype> +- </sizepolicy> +- </property> +- <property> +- <name>toolTip</name> +- <string>Set the count value</string> +- </property> +- </widget> +- <spacer> +- <property> +- <name>name</name> +- <cstring>Spacer13_2</cstring> +- </property> +- <property stdset="1"> +- <name>orientation</name> +- <enum>Horizontal</enum> +- </property> +- <property stdset="1"> +- <name>sizeType</name> +- <enum>Expanding</enum> +- </property> +- <property> +- <name>sizeHint</name> +- <size> +- <width>20</width> +- <height>20</height> +- </size> +- </property> +- </spacer> +- </hbox> +- </widget> +- <widget> +- <class>QButtonGroup</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>unit_mask_group</cstring> +- </property> +- <property stdset="1"> +- <name>sizePolicy</name> +- <sizepolicy> +- <hsizetype>1</hsizetype> +- <vsizetype>5</vsizetype> +- </sizepolicy> +- </property> +- <property stdset="1"> +- <name>title</name> +- <string>Unit mask</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>Unit mask settings for this event</string> +- </property> +- <grid> +- <property stdset="1"> +- <name>margin</name> +- <number>11</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget row="0" column="0" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check0</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check0</string> +- </property> +- </widget> +- <widget row="1" column="0" rowspan="2" colspan="2" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check1</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check1</string> +- </property> +- </widget> +- <widget row="3" column="0" rowspan="2" colspan="2" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check2</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check2</string> +- </property> +- </widget> +- <widget row="5" column="0" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check3</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check3</string> +- </property> +- </widget> +- <widget row="6" column="0" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check4</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check4</string> +- </property> +- </widget> +- <widget row="7" column="0" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check5</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check5</string> +- </property> +- </widget> +- <widget row="8" column="0" rowspan="2" colspan="2" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check6</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check6</string> +- </property> +- </widget> +- <widget row="10" column="0" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check7</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check7</string> +- </property> +- </widget> +- <spacer row="11" column="1" > +- <property> +- <name>name</name> +- <cstring>Spacer14</cstring> +- </property> +- <property stdset="1"> +- <name>orientation</name> +- <enum>Vertical</enum> +- </property> +- <property stdset="1"> +- <name>sizeType</name> +- <enum>Expanding</enum> +- </property> +- <property> +- <name>sizeHint</name> +- <size> +- <width>20</width> +- <height>20</height> +- </size> +- </property> +- </spacer> +- <widget row="5" column="1" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check11</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check11</string> +- </property> +- </widget> +- <widget row="7" column="1" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check13</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check13</string> +- </property> +- </widget> +- <widget row="10" column="1" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check15</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check15</string> +- </property> +- </widget> +- <widget row="4" column="1" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check10</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check10</string> +- </property> +- </widget> +- <widget row="9" column="1" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check14</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check14</string> +- </property> +- </widget> +- <widget row="2" column="1" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check9</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check9</string> +- </property> +- </widget> +- <widget row="0" column="1" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check8</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check8</string> +- </property> +- </widget> +- <widget row="6" column="1" > +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>check12</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>check12</string> +- </property> +- </widget> +- </grid> +- </widget> +- </vbox> +- </widget> +- </hbox> +- </widget> +- <widget> +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>event_help_label</cstring> +- </property> +- <property stdset="1"> +- <name>enabled</name> +- <bool>true</bool> +- </property> +- <property stdset="1"> +- <name>sizePolicy</name> +- <sizepolicy> +- <hsizetype>1</hsizetype> +- <vsizetype>1</vsizetype> +- </sizepolicy> +- </property> +- <property stdset="1"> +- <name>frameShape</name> +- <enum>WinPanel</enum> +- </property> +- <property stdset="1"> +- <name>frameShadow</name> +- <enum>Sunken</enum> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string></string> +- </property> +- </widget> +- </vbox> +- </widget> +- </vbox> +- </widget> +- <widget> +- <class>QWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>configuration_page</cstring> ++ <property name="text"> ++ <string>Profile &kernel</string> + </property> +- <attribute> +- <name>title</name> +- <string>&Configuration</string> +- </attribute> +- <vbox> +- <property stdset="1"> +- <name>margin</name> +- <number>11</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout11</cstring> +- </property> +- <hbox> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>TextLabel1</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>&Kernel image file</string> +- </property> +- <property> +- <name>buddy</name> +- <cstring>kernel_filename_edit</cstring> +- </property> +- </widget> +- <widget> +- <class>QLineEdit</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>kernel_filename_edit</cstring> +- </property> +- <property> +- <name>toolTip</name> +- <string>The vmlinux file of the running kernel</string> +- </property> +- </widget> +- <widget> +- <class>QToolButton</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>kernel_filename_tb</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>...</string> +- </property> +- </widget> +- <widget> +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>no_vmlinux</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>No kernel image</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>No kernel image available. Disables kernel profiling.</string> +- </property> +- </widget> +- </hbox> +- </widget> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout12</cstring> +- </property> +- <hbox> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout11</cstring> +- </property> +- <grid> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget row="0" column="1" > +- <class>QLineEdit</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>buffer_size_edit</cstring> +- </property> +- <property> +- <name>toolTip</name> +- <string>The size of the profiler's buffers</string> +- </property> +- </widget> +- <widget row="1" column="1" > +- <class>QLineEdit</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>note_table_size_edit</cstring> +- </property> +- </widget> +- <widget row="3" column="0" > +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>cpu_buffer_size_label</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Cpu buffer size</string> +- </property> +- <property> +- <name>buddy</name> +- <cstring>cpu_buffer_size_edit</cstring> +- </property> +- </widget> +- <widget row="3" column="1" > +- <class>QLineEdit</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>cpu_buffer_size_edit</cstring> +- </property> +- </widget> +- <widget row="0" column="0" > +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>buffer_size_label</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>&Buffer size</string> +- </property> +- <property> +- <name>buddy</name> +- <cstring>buffer_size_edit</cstring> +- </property> +- </widget> +- <widget row="1" column="0" > +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>note_table_size_label</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Note Size</string> +- </property> +- <property> +- <name>buddy</name> +- <cstring>note_table_size_edit</cstring> +- </property> +- </widget> +- <widget row="2" column="1" > +- <class>QLineEdit</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>buffer_watershed_edit</cstring> +- </property> +- </widget> +- <widget row="2" column="0" > +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>buffer_watershed_label</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Buffer watershed</string> +- </property> +- <property> +- <name>buddy</name> +- <cstring>buffer_watershed_edit</cstring> +- </property> +- </widget> +- </grid> +- </widget> +- <spacer> +- <property> +- <name>name</name> +- <cstring>Spacer11</cstring> +- </property> +- <property stdset="1"> +- <name>orientation</name> +- <enum>Horizontal</enum> +- </property> +- <property stdset="1"> +- <name>sizeType</name> +- <enum>Expanding</enum> +- </property> +- <property> +- <name>sizeHint</name> +- <size> +- <width>20</width> +- <height>20</height> +- </size> +- </property> +- </spacer> +- </hbox> +- </widget> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout36</cstring> +- </property> +- <grid> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget row="0" column="0" > +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout34</cstring> +- </property> +- <vbox> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>verbose</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>&Verbose</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>Very verbose output in log file</string> +- </property> +- </widget> +- <widget> +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>separate_lib_cb</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Per-application profiles</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>Separate samples for each shared library. This increases the time and space overhead of OProfile.</string> +- </property> +- </widget> +- <widget> +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>separate_kernel_cb</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Per-application profiles, including kernel</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string> +- </property> +- </widget> +- <widget> +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>separate_cpu_cb</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Per-CPU profiles</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string> +- </property> +- </widget> +- <widget> +- <class>QCheckBox</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>separate_thread_cb</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Per-thread/task profiles</string> +- </property> +- <property> +- <name>toolTip</name> +- <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string> +- </property> +- </widget> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout33</cstring> +- </property> +- <hbox> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>callgraph_depth_label</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>callgraph depth, zero to disable</string> +- </property> +- <property> +- <name>buddy</name> +- <cstring>callgraph_depth_edit</cstring> +- </property> +- </widget> +- <widget> +- <class>QLineEdit</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>callgraph_depth_edit</cstring> +- </property> +- </widget> +- </hbox> +- </widget> +- </vbox> +- </widget> +- <spacer row="0" column="1" > +- <property> +- <name>name</name> +- <cstring>Spacer12</cstring> +- </property> +- <property stdset="1"> +- <name>orientation</name> +- <enum>Horizontal</enum> +- </property> +- <property stdset="1"> +- <name>sizeType</name> +- <enum>Expanding</enum> +- </property> +- <property> +- <name>sizeHint</name> +- <size> +- <width>20</width> +- <height>20</height> +- </size> +- </property> +- </spacer> +- </grid> +- </widget> +- <spacer> +- <property> +- <name>name</name> +- <cstring>Spacer9</cstring> +- </property> +- <property stdset="1"> +- <name>orientation</name> +- <enum>Vertical</enum> +- </property> +- <property stdset="1"> +- <name>sizeType</name> +- <enum>Expanding</enum> +- </property> +- <property> +- <name>sizeHint</name> +- <size> +- <width>20</width> +- <height>20</height> +- </size> +- </property> +- </spacer> +- </vbox> +- </widget> +- </widget> +- <widget> +- <class>QLabel</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>daemon_label</cstring> ++ </widget> ++ </item> ++ <item> ++ <widget class="QCheckBox" name="user_ring_count_cb"> ++ <property name="toolTip"> ++ <string>Profile user libraries and applications</string> ++ </property> ++ <property name="text"> ++ <string>Profile &user binaries</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <layout class="QHBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <item> ++ <widget class="QLabel" name="TextLabel1_2"> ++ <property name="text"> ++ <string>C&ount</string> ++ </property> ++ <property name="wordWrap"> ++ <bool>false</bool> ++ </property> ++ <property name="buddy"> ++ <cstring>event_count_edit</cstring> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QLineEdit" name="event_count_edit"> ++ <property name="sizePolicy"> ++ <sizepolicy hsizetype="Minimum" vsizetype="Fixed"> ++ <horstretch>0</horstretch> ++ <verstretch>0</verstretch> ++ </sizepolicy> ++ </property> ++ <property name="toolTip"> ++ <string>Set the count value</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <spacer name="Spacer13_2"> ++ <property name="orientation"> ++ <enum>Qt::Horizontal</enum> ++ </property> ++ <property name="sizeType"> ++ <enum>QSizePolicy::Expanding</enum> ++ </property> ++ <property name="sizeHint" stdset="0"> ++ <size> ++ <width>20</width> ++ <height>20</height> ++ </size> ++ </property> ++ </spacer> ++ </item> ++ </layout> ++ </item> ++ <item> ++ <widget class="Q3ButtonGroup" name="unit_mask_group"> ++ <property name="sizePolicy"> ++ <sizepolicy hsizetype="Minimum" vsizetype="Preferred"> ++ <horstretch>0</horstretch> ++ <verstretch>0</verstretch> ++ </sizepolicy> ++ </property> ++ <property name="toolTip"> ++ <string>Unit mask settings for this event</string> ++ </property> ++ <property name="title"> ++ <string>Unit mask</string> ++ </property> ++ <layout class="QGridLayout"> ++ <property name="margin"> ++ <number>11</number> ++ </property> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <item row="0" column="0"> ++ <widget class="QCheckBox" name="check0"> ++ <property name="text"> ++ <string>check0</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="1" column="0" rowspan="2" colspan="2"> ++ <widget class="QCheckBox" name="check1"> ++ <property name="text"> ++ <string>check1</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="3" column="0" rowspan="2" colspan="2"> ++ <widget class="QCheckBox" name="check2"> ++ <property name="text"> ++ <string>check2</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="5" column="0"> ++ <widget class="QCheckBox" name="check3"> ++ <property name="text"> ++ <string>check3</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="6" column="0"> ++ <widget class="QCheckBox" name="check4"> ++ <property name="text"> ++ <string>check4</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="7" column="0"> ++ <widget class="QCheckBox" name="check5"> ++ <property name="text"> ++ <string>check5</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="8" column="0" rowspan="2" colspan="2"> ++ <widget class="QCheckBox" name="check6"> ++ <property name="text"> ++ <string>check6</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="10" column="0"> ++ <widget class="QCheckBox" name="check7"> ++ <property name="text"> ++ <string>check7</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="11" column="1"> ++ <spacer name="Spacer14"> ++ <property name="orientation"> ++ <enum>Qt::Vertical</enum> ++ </property> ++ <property name="sizeType"> ++ <enum>QSizePolicy::Expanding</enum> ++ </property> ++ <property name="sizeHint" stdset="0"> ++ <size> ++ <width>20</width> ++ <height>20</height> ++ </size> ++ </property> ++ </spacer> ++ </item> ++ <item row="5" column="1"> ++ <widget class="QCheckBox" name="check11"> ++ <property name="text"> ++ <string>check11</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="7" column="1"> ++ <widget class="QCheckBox" name="check13"> ++ <property name="text"> ++ <string>check13</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="10" column="1"> ++ <widget class="QCheckBox" name="check15"> ++ <property name="text"> ++ <string>check15</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="4" column="1"> ++ <widget class="QCheckBox" name="check10"> ++ <property name="text"> ++ <string>check10</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="9" column="1"> ++ <widget class="QCheckBox" name="check14"> ++ <property name="text"> ++ <string>check14</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="2" column="1"> ++ <widget class="QCheckBox" name="check9"> ++ <property name="text"> ++ <string>check9</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="0" column="1"> ++ <widget class="QCheckBox" name="check8"> ++ <property name="text"> ++ <string>check8</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ <item row="6" column="1"> ++ <widget class="QCheckBox" name="check12"> ++ <property name="text"> ++ <string>check12</string> ++ </property> ++ <attribute name="buttonGroup"> ++ <string/> ++ </attribute> ++ </widget> ++ </item> ++ </layout> ++ </widget> ++ </item> ++ </layout> ++ </item> ++ </layout> ++ </item> ++ <item> ++ <widget class="QLabel" name="event_help_label"> ++ <property name="enabled"> ++ <bool>true</bool> + </property> +- <property stdset="1"> +- <name>frameShape</name> +- <enum>Panel</enum> ++ <property name="sizePolicy"> ++ <sizepolicy hsizetype="Minimum" vsizetype="Minimum"> ++ <horstretch>0</horstretch> ++ <verstretch>0</verstretch> ++ </sizepolicy> + </property> +- <property stdset="1"> +- <name>frameShadow</name> +- <enum>Sunken</enum> ++ <property name="frameShape"> ++ <enum>QFrame::Panel</enum> + </property> +- <property stdset="1"> +- <name>text</name> +- <string></string> ++ <property name="frameShadow"> ++ <enum>QFrame::Sunken</enum> + </property> +- <property> +- <name>toolTip</name> +- <string>Current daemon status</string> ++ <property name="text"> ++ <string/> + </property> +- </widget> +- <widget> +- <class>QLayoutWidget</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>Layout37</cstring> ++ <property name="wordWrap"> ++ <bool>false</bool> + </property> +- <hbox> +- <property stdset="1"> +- <name>margin</name> +- <number>0</number> +- </property> +- <property stdset="1"> +- <name>spacing</name> +- <number>6</number> +- </property> +- <widget> +- <class>QPushButton</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>start_profiler_btn</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>St&art</string> +- </property> +- </widget> +- <widget> +- <class>QPushButton</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>flush_profiler_data_btn</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>&Flush</string> +- </property> +- </widget> +- <widget> +- <class>QPushButton</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>stop_profiler_btn</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Stop</string> +- </property> +- </widget> +- <spacer> +- <property> +- <name>name</name> +- <cstring>Spacer5</cstring> +- </property> +- <property stdset="1"> +- <name>orientation</name> +- <enum>Horizontal</enum> +- </property> +- <property stdset="1"> +- <name>sizeType</name> +- <enum>Expanding</enum> +- </property> +- <property> +- <name>sizeHint</name> +- <size> +- <width>20</width> +- <height>20</height> +- </size> +- </property> +- </spacer> +- <widget> +- <class>QPushButton</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>reset_sample_files_btn</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Reset sample files</string> +- </property> +- </widget> +- <widget> +- <class>QPushButton</class> +- <property stdset="1"> +- <name>name</name> +- <cstring>quit_and_save_btn</cstring> +- </property> +- <property stdset="1"> +- <name>text</name> +- <string>Save and &quit</string> +- </property> +- <property stdset="1"> +- <name>autoDefault</name> +- <bool>true</bool> +- </property> +- </widget> +- </hbox> ++ </widget> ++ </item> ++ </layout> + </widget> +- </vbox> +-</widget> +-<connections> +- <connection> +- <sender>start_profiler_btn</sender> +- <signal>clicked()</signal> +- <receiver>oprof_start_base</receiver> +- <slot>on_start_profiler()</slot> +- </connection> +- <connection> +- <sender>stop_profiler_btn</sender> +- <signal>clicked()</signal> +- <receiver>oprof_start_base</receiver> +- <slot>on_stop_profiler()</slot> +- </connection> +- <connection> +- <sender>flush_profiler_data_btn</sender> +- <signal>clicked()</signal> +- <receiver>oprof_start_base</receiver> +- <slot>on_flush_profiler_data()</slot> +- </connection> +- <connection> +- <sender>quit_and_save_btn</sender> +- <signal>clicked()</signal> +- <receiver>oprof_start_base</receiver> +- <slot>accept()</slot> +- </connection> +- <connection> +- <sender>kernel_filename_tb</sender> +- <signal>clicked()</signal> +- <receiver>oprof_start_base</receiver> +- <slot>choose_kernel_filename()</slot> +- </connection> +- <connection> +- <sender>no_vmlinux</sender> +- <signal>toggled(bool)</signal> +- <receiver>kernel_filename_tb</receiver> +- <slot>setDisabled(bool)</slot> +- </connection> +- <connection> +- <sender>no_vmlinux</sender> +- <signal>toggled(bool)</signal> +- <receiver>kernel_filename_edit</receiver> +- <slot>setDisabled(bool)</slot> +- </connection> +- <connection> +- <sender>no_vmlinux</sender> +- <signal>toggled(bool)</signal> +- <receiver>TextLabel1</receiver> +- <slot>setDisabled(bool)</slot> +- </connection> +- <connection> +- <sender>separate_kernel_cb</sender> +- <signal>stateChanged(int)</signal> +- <receiver>oprof_start_base</receiver> +- <slot>on_separate_kernel_cb_changed(int)</slot> +- </connection> +- <connection> +- <sender>reset_sample_files_btn</sender> +- <signal>clicked()</signal> +- <receiver>oprof_start_base</receiver> +- <slot>on_reset_sample_files()</slot> +- </connection> +- <connection> +- <sender>events_list</sender> +- <signal>selectionChanged()</signal> +- <receiver>oprof_start_base</receiver> +- <slot>event_selected()</slot> +- </connection> +- <connection> +- <sender>events_list</sender> +- <signal>currentChanged(QListViewItem*)</signal> +- <receiver>oprof_start_base</receiver> +- <slot>event_over(QListViewItem *)</slot> +- </connection> +- <connection> +- <sender>events_list</sender> +- <signal>onItem(QListViewItem*)</signal> +- <receiver>oprof_start_base</receiver> +- <slot>event_over(QListViewItem *)</slot> +- </connection> +- <slot access="protected">choose_kernel_filename()</slot> +- <slot access="protected">event_over(QListViewItem *)</slot> +- <slot access="protected">event_selected()</slot> +- <slot access="protected">on_reset_sample_files()</slot> +- <slot access="protected">on_flush_profiler_data()</slot> +- <slot access="protected">on_separate_kernel_cb_changed(int)</slot> +- <slot access="protected">on_start_profiler()</slot> +- <slot access="protected">on_stop_profiler()</slot> +-</connections> +-<tabstops> +- <tabstop>setup_config_tab</tabstop> +- <tabstop>events_list</tabstop> +- <tabstop>os_ring_count_cb</tabstop> +- <tabstop>user_ring_count_cb</tabstop> +- <tabstop>event_count_edit</tabstop> +- <tabstop>check0</tabstop> +- <tabstop>check1</tabstop> +- <tabstop>check2</tabstop> +- <tabstop>check3</tabstop> +- <tabstop>check4</tabstop> +- <tabstop>check5</tabstop> +- <tabstop>check6</tabstop> +- <tabstop>check7</tabstop> +- <tabstop>check8</tabstop> +- <tabstop>check9</tabstop> +- <tabstop>check10</tabstop> +- <tabstop>check11</tabstop> +- <tabstop>check12</tabstop> +- <tabstop>check13</tabstop> +- <tabstop>check14</tabstop> +- <tabstop>check15</tabstop> +- <tabstop>start_profiler_btn</tabstop> +- <tabstop>flush_profiler_data_btn</tabstop> +- <tabstop>stop_profiler_btn</tabstop> +- <tabstop>reset_sample_files_btn</tabstop> +- <tabstop>quit_and_save_btn</tabstop> +- <tabstop>kernel_filename_edit</tabstop> +- <tabstop>no_vmlinux</tabstop> +- <tabstop>buffer_size_edit</tabstop> +- <tabstop>note_table_size_edit</tabstop> +- <tabstop>buffer_watershed_edit</tabstop> +- <tabstop>verbose</tabstop> +- <tabstop>separate_lib_cb</tabstop> +- <tabstop>separate_kernel_cb</tabstop> +- <tabstop>separate_cpu_cb</tabstop> +- <tabstop>separate_thread_cb</tabstop> +- <tabstop>callgraph_depth_edit</tabstop> +-</tabstops> +-</UI> ++ </item> ++ </layout> ++ </widget> ++ <widget class="QWidget" name="configuration_page"> ++ <attribute name="title"> ++ <string>&Configuration</string> ++ </attribute> ++ <layout class="QVBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>11</number> ++ </property> ++ <item> ++ <layout class="QHBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <item> ++ <widget class="QLabel" name="TextLabel1"> ++ <property name="text"> ++ <string>&Kernel image file</string> ++ </property> ++ <property name="wordWrap"> ++ <bool>false</bool> ++ </property> ++ <property name="buddy"> ++ <cstring>kernel_filename_edit</cstring> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QLineEdit" name="kernel_filename_edit"> ++ <property name="toolTip"> ++ <string>The vmlinux file of the running kernel</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QToolButton" name="kernel_filename_tb"> ++ <property name="text"> ++ <string>...</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QCheckBox" name="no_vmlinux"> ++ <property name="toolTip"> ++ <string>No kernel image available. Disables kernel profiling.</string> ++ </property> ++ <property name="text"> ++ <string>No kernel image</string> ++ </property> ++ </widget> ++ </item> ++ </layout> ++ </item> ++ <item> ++ <layout class="QHBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <item> ++ <layout class="QGridLayout"> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <item row="0" column="1"> ++ <widget class="QLineEdit" name="buffer_size_edit"> ++ <property name="toolTip"> ++ <string>The size of the profiler's buffers</string> ++ </property> ++ </widget> ++ </item> ++ <item row="1" column="1"> ++ <widget class="QLineEdit" name="note_table_size_edit"/> ++ </item> ++ <item row="3" column="0"> ++ <widget class="QLabel" name="cpu_buffer_size_label"> ++ <property name="text"> ++ <string>Cpu buffer size</string> ++ </property> ++ <property name="wordWrap"> ++ <bool>false</bool> ++ </property> ++ <property name="buddy"> ++ <cstring>cpu_buffer_size_edit</cstring> ++ </property> ++ </widget> ++ </item> ++ <item row="3" column="1"> ++ <widget class="QLineEdit" name="cpu_buffer_size_edit"/> ++ </item> ++ <item row="0" column="0"> ++ <widget class="QLabel" name="buffer_size_label"> ++ <property name="text"> ++ <string>&Buffer size</string> ++ </property> ++ <property name="wordWrap"> ++ <bool>false</bool> ++ </property> ++ <property name="buddy"> ++ <cstring>buffer_size_edit</cstring> ++ </property> ++ </widget> ++ </item> ++ <item row="1" column="0"> ++ <widget class="QLabel" name="note_table_size_label"> ++ <property name="text"> ++ <string>Note Size</string> ++ </property> ++ <property name="wordWrap"> ++ <bool>false</bool> ++ </property> ++ <property name="buddy"> ++ <cstring>note_table_size_edit</cstring> ++ </property> ++ </widget> ++ </item> ++ <item row="2" column="1"> ++ <widget class="QLineEdit" name="buffer_watershed_edit"/> ++ </item> ++ <item row="2" column="0"> ++ <widget class="QLabel" name="buffer_watershed_label"> ++ <property name="text"> ++ <string>Buffer watershed</string> ++ </property> ++ <property name="wordWrap"> ++ <bool>false</bool> ++ </property> ++ <property name="buddy"> ++ <cstring>buffer_watershed_edit</cstring> ++ </property> ++ </widget> ++ </item> ++ </layout> ++ </item> ++ <item> ++ <spacer name="Spacer11"> ++ <property name="orientation"> ++ <enum>Qt::Horizontal</enum> ++ </property> ++ <property name="sizeType"> ++ <enum>QSizePolicy::Expanding</enum> ++ </property> ++ <property name="sizeHint" stdset="0"> ++ <size> ++ <width>20</width> ++ <height>20</height> ++ </size> ++ </property> ++ </spacer> ++ </item> ++ </layout> ++ </item> ++ <item> ++ <layout class="QGridLayout"> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <item row="0" column="0"> ++ <layout class="QVBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <item> ++ <widget class="QCheckBox" name="verbose"> ++ <property name="toolTip"> ++ <string>Very verbose output in log file</string> ++ </property> ++ <property name="text"> ++ <string>&Verbose</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QCheckBox" name="separate_lib_cb"> ++ <property name="toolTip"> ++ <string>Separate samples for each shared library. This increases the time and space overhead of OProfile.</string> ++ </property> ++ <property name="text"> ++ <string>Per-application profiles</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QCheckBox" name="separate_kernel_cb"> ++ <property name="toolTip"> ++ <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string> ++ </property> ++ <property name="text"> ++ <string>Per-application profiles, including kernel</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QCheckBox" name="separate_cpu_cb"> ++ <property name="toolTip"> ++ <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string> ++ </property> ++ <property name="text"> ++ <string>Per-CPU profiles</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QCheckBox" name="separate_thread_cb"> ++ <property name="toolTip"> ++ <string>Separate samples for each shared library and kernel samples. This increases the time and space overhead of OProfile.</string> ++ </property> ++ <property name="text"> ++ <string>Per-thread/task profiles</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <layout class="QHBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <item> ++ <widget class="QLabel" name="callgraph_depth_label"> ++ <property name="text"> ++ <string>callgraph depth, zero to disable</string> ++ </property> ++ <property name="wordWrap"> ++ <bool>false</bool> ++ </property> ++ <property name="buddy"> ++ <cstring>callgraph_depth_edit</cstring> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QLineEdit" name="callgraph_depth_edit"/> ++ </item> ++ </layout> ++ </item> ++ </layout> ++ </item> ++ <item row="0" column="1"> ++ <spacer name="Spacer12"> ++ <property name="orientation"> ++ <enum>Qt::Horizontal</enum> ++ </property> ++ <property name="sizeType"> ++ <enum>QSizePolicy::Expanding</enum> ++ </property> ++ <property name="sizeHint" stdset="0"> ++ <size> ++ <width>20</width> ++ <height>20</height> ++ </size> ++ </property> ++ </spacer> ++ </item> ++ </layout> ++ </item> ++ <item> ++ <spacer name="Spacer9"> ++ <property name="orientation"> ++ <enum>Qt::Vertical</enum> ++ </property> ++ <property name="sizeType"> ++ <enum>QSizePolicy::Expanding</enum> ++ </property> ++ <property name="sizeHint" stdset="0"> ++ <size> ++ <width>20</width> ++ <height>20</height> ++ </size> ++ </property> ++ </spacer> ++ </item> ++ </layout> ++ </widget> ++ </widget> ++ </item> ++ <item> ++ <widget class="QLabel" name="daemon_label"> ++ <property name="toolTip"> ++ <string>Current daemon status</string> ++ </property> ++ <property name="frameShape"> ++ <enum>QFrame::Panel</enum> ++ </property> ++ <property name="frameShadow"> ++ <enum>QFrame::Sunken</enum> ++ </property> ++ <property name="text"> ++ <string/> ++ </property> ++ <property name="wordWrap"> ++ <bool>false</bool> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <layout class="QHBoxLayout"> ++ <property name="spacing"> ++ <number>6</number> ++ </property> ++ <property name="margin"> ++ <number>0</number> ++ </property> ++ <item> ++ <widget class="QPushButton" name="start_profiler_btn"> ++ <property name="text"> ++ <string>St&art</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QPushButton" name="flush_profiler_data_btn"> ++ <property name="text"> ++ <string>&Flush</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QPushButton" name="stop_profiler_btn"> ++ <property name="text"> ++ <string>Stop</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <spacer name="Spacer5"> ++ <property name="orientation"> ++ <enum>Qt::Horizontal</enum> ++ </property> ++ <property name="sizeType"> ++ <enum>QSizePolicy::Expanding</enum> ++ </property> ++ <property name="sizeHint" stdset="0"> ++ <size> ++ <width>20</width> ++ <height>20</height> ++ </size> ++ </property> ++ </spacer> ++ </item> ++ <item> ++ <widget class="QPushButton" name="reset_sample_files_btn"> ++ <property name="text"> ++ <string>Reset sample files</string> ++ </property> ++ </widget> ++ </item> ++ <item> ++ <widget class="QPushButton" name="quit_and_save_btn"> ++ <property name="text"> ++ <string>Save and &quit</string> ++ </property> ++ <property name="autoDefault"> ++ <bool>true</bool> ++ </property> ++ </widget> ++ </item> ++ </layout> ++ </item> ++ </layout> ++ </widget> ++ <pixmapfunction>qPixmapFromMimeSource</pixmapfunction> ++ <customwidgets> ++ <customwidget> ++ <class>Q3GroupBox</class> ++ <extends>QGroupBox</extends> ++ <header>Qt3Support/Q3GroupBox</header> ++ <container>1</container> ++ </customwidget> ++ <customwidget> ++ <class>Q3Frame</class> ++ <extends>QFrame</extends> ++ <header>Qt3Support/Q3Frame</header> ++ <container>1</container> ++ </customwidget> ++ <customwidget> ++ <class>Q3ButtonGroup</class> ++ <extends>Q3GroupBox</extends> ++ <header>Qt3Support/Q3ButtonGroup</header> ++ <container>1</container> ++ </customwidget> ++ <customwidget> ++ <class>Q3ListView</class> ++ <extends>Q3Frame</extends> ++ <header>q3listview.h</header> ++ </customwidget> ++ </customwidgets> ++ <tabstops> ++ <tabstop>setup_config_tab</tabstop> ++ <tabstop>events_list</tabstop> ++ <tabstop>os_ring_count_cb</tabstop> ++ <tabstop>user_ring_count_cb</tabstop> ++ <tabstop>event_count_edit</tabstop> ++ <tabstop>check0</tabstop> ++ <tabstop>check1</tabstop> ++ <tabstop>check2</tabstop> ++ <tabstop>check3</tabstop> ++ <tabstop>check4</tabstop> ++ <tabstop>check5</tabstop> ++ <tabstop>check6</tabstop> ++ <tabstop>check7</tabstop> ++ <tabstop>check8</tabstop> ++ <tabstop>check9</tabstop> ++ <tabstop>check10</tabstop> ++ <tabstop>check11</tabstop> ++ <tabstop>check12</tabstop> ++ <tabstop>check13</tabstop> ++ <tabstop>check14</tabstop> ++ <tabstop>check15</tabstop> ++ <tabstop>start_profiler_btn</tabstop> ++ <tabstop>flush_profiler_data_btn</tabstop> ++ <tabstop>stop_profiler_btn</tabstop> ++ <tabstop>reset_sample_files_btn</tabstop> ++ <tabstop>quit_and_save_btn</tabstop> ++ <tabstop>kernel_filename_edit</tabstop> ++ <tabstop>no_vmlinux</tabstop> ++ <tabstop>buffer_size_edit</tabstop> ++ <tabstop>note_table_size_edit</tabstop> ++ <tabstop>buffer_watershed_edit</tabstop> ++ <tabstop>verbose</tabstop> ++ <tabstop>separate_lib_cb</tabstop> ++ <tabstop>separate_kernel_cb</tabstop> ++ <tabstop>separate_cpu_cb</tabstop> ++ <tabstop>separate_thread_cb</tabstop> ++ <tabstop>callgraph_depth_edit</tabstop> ++ </tabstops> ++ <resources/> ++ <connections> ++ <connection> ++ <sender>start_profiler_btn</sender> ++ <signal>clicked(bool)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>start_profiler()</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>stop_profiler_btn</sender> ++ <signal>clicked(bool)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>stop_profiler()</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>flush_profiler_data_btn</sender> ++ <signal>clicked(bool)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>flush_profiler_data()</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>quit_and_save_btn</sender> ++ <signal>clicked(bool)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>accept()</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>kernel_filename_tb</sender> ++ <signal>clicked(bool)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>choose_kernel_filename()</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>no_vmlinux</sender> ++ <signal>toggled(bool)</signal> ++ <receiver>kernel_filename_tb</receiver> ++ <slot>setDisabled(bool)</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>no_vmlinux</sender> ++ <signal>toggled(bool)</signal> ++ <receiver>kernel_filename_edit</receiver> ++ <slot>setDisabled(bool)</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>no_vmlinux</sender> ++ <signal>toggled(bool)</signal> ++ <receiver>TextLabel1</receiver> ++ <slot>setDisabled(bool)</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>separate_kernel_cb</sender> ++ <signal>stateChanged(int)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>separate_kernel_cb_changed(int)</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>reset_sample_files_btn</sender> ++ <signal>clicked(bool)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>reset_sample_files()</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>events_list</sender> ++ <signal>selectionChanged()</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>event_selected()</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>events_list</sender> ++ <signal>currentChanged(Q3ListViewItem*)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>event_over(Q3ListViewItem*)</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ <connection> ++ <sender>events_list</sender> ++ <signal>onItem(Q3ListViewItem*)</signal> ++ <receiver>oprof_start_base</receiver> ++ <slot>event_over(Q3ListViewItem*)</slot> ++ <hints> ++ <hint type="sourcelabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ <hint type="destinationlabel"> ++ <x>20</x> ++ <y>20</y> ++ </hint> ++ </hints> ++ </connection> ++ </connections> ++</ui> +diff --git a/m4/qt.m4 b/m4/qt.m4 +deleted file mode 100644 +index b0e30ef..0000000 +--- a/m4/qt.m4 ++++ /dev/null +@@ -1,217 +0,0 @@ +-dnl find a binary in the path +-AC_DEFUN([QT_FIND_PATH], +-[ +- AC_MSG_CHECKING([for $1]) +- AC_CACHE_VAL(qt_cv_path_$1, +- [ +- qt_cv_path_$1="NONE" +- if test -n "$$2"; then +- qt_cv_path_$1="$$2"; +- else +- dirs="$3" +- qt_save_IFS=$IFS +- IFS=':' +- for dir in $PATH; do +- dirs="$dirs $dir" +- done +- IFS=$qt_save_IFS +- +- for dir in $dirs; do +- if test -x "$dir/$1"; then +- if test -n "$5"; then +- evalstr="$dir/$1 $5 2>&1 " +- if eval $evalstr; then +- qt_cv_path_$1="$dir/$1" +- break +- fi +- else +- qt_cv_path_$1="$dir/$1" +- break +- fi +- fi +- done +- fi +- ]) +- +- if test -z "$qt_cv_path_$1" || test "$qt_cv_path_$1" = "NONE"; then +- AC_MSG_RESULT(not found) +- $4 +- else +- AC_MSG_RESULT($qt_cv_path_$1) +- $2=$qt_cv_path_$1 +- fi +-]) +- +-dnl Find the uic compiler on the path or in qt_cv_dir +-AC_DEFUN([QT_FIND_UIC], +-[ +- QT_FIND_PATH(uic, ac_uic, $qt_cv_dir/bin) +- if test -z "$ac_uic" -a "$FATAL" = 1; then +- AC_MSG_ERROR([uic binary not found in \$PATH or $qt_cv_dir/bin !]) +- fi +-]) +- +-dnl Find the right moc in path/qt_cv_dir +-AC_DEFUN([QT_FIND_MOC], +-[ +- QT_FIND_PATH(moc2, ac_moc2, $qt_cv_dir/bin) +- QT_FIND_PATH(moc, ac_moc1, $qt_cv_dir/bin) +- +- if test -n "$ac_moc1" -a -n "$ac_moc2"; then +- dnl found both. Prefer Qt3's if it exists else moc2 +- $ac_moc1 -v 2>&1 | grep "Qt 3" >/dev/null +- if test "$?" = 0; then +- ac_moc=$ac_moc1; +- else +- ac_moc=$ac_moc2; +- fi +- else +- if test -n "$ac_moc1"; then +- ac_moc=$ac_moc1; +- else +- ac_moc=$ac_moc2; +- fi +- fi +- +- if test -z "$ac_moc" -a "$FATAL" = 1; then +- AC_MSG_ERROR([moc binary not found in \$PATH or $qt_cv_dir/bin !]) +- fi +-]) +- +-dnl check a particular libname +-AC_DEFUN([QT_TRY_LINK], +-[ +- SAVE_LIBS="$LIBS" +- LIBS="$LIBS $1" +- AC_TRY_LINK([ +- #include <qglobal.h> +- #include <qstring.h> +- ], +- [ +- QString s("mangle_failure"); +- #if (QT_VERSION < 221) +- break_me_(\\\); +- #endif +- ], +- qt_cv_libname=$1, +- ) +- LIBS="$SAVE_LIBS" +-]) +- +-dnl check we can do a compile +-AC_DEFUN([QT_CHECK_COMPILE], +-[ +- AC_MSG_CHECKING([for Qt library name]) +- +- AC_CACHE_VAL(qt_cv_libname, +- [ +- AC_LANG_CPLUSPLUS +- SAVE_CXXFLAGS=$CXXFLAGS +- CXXFLAGS="$CXXFLAGS $QT_INCLUDES $QT_LDFLAGS" +- +- for libname in -lqt-mt -lqt3 -lqt2 -lqt; +- do +- QT_TRY_LINK($libname) +- if test -n "$qt_cv_libname"; then +- break; +- fi +- done +- +- CXXFLAGS=$SAVE_CXXFLAGS +- ]) +- +- if test -z "$qt_cv_libname"; then +- AC_MSG_RESULT([failed]) +- if test "$FATAL" = 1 ; then +- AC_MSG_ERROR([Cannot compile a simple Qt executable. Check you have the right \$QTDIR !]) +- fi +- else +- AC_MSG_RESULT([$qt_cv_libname]) +- fi +-]) +- +-dnl get Qt version we're using +-AC_DEFUN([QT_GET_VERSION], +-[ +- AC_CACHE_CHECK([Qt version],lyx_cv_qtversion, +- [ +- AC_LANG_CPLUSPLUS +- SAVE_CPPFLAGS=$CPPFLAGS +- CPPFLAGS="$CPPFLAGS $QT_INCLUDES" +- +- cat > conftest.$ac_ext <<EOF +-#line __oline__ "configure" +-#include "confdefs.h" +-#include <qglobal.h> +-"%%%"QT_VERSION_STR"%%%" +-EOF +- lyx_cv_qtversion=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \ +- grep '^"%%%"' 2>/dev/null | \ +- sed -e 's/"%%%"//g' -e 's/"//g'` +- rm -f conftest.$ac_ext +- CPPFLAGS=$SAVE_CPPFLAGS +- ]) +- +- QT_VERSION=$lyx_cv_qtversion +- AC_SUBST(QT_VERSION) +-]) +- +-dnl start here +-AC_DEFUN([QT_DO_IT_ALL], +-[ +- dnl Please leave this alone. I use this file in +- dnl oprofile. +- FATAL=0 +- +- AC_ARG_WITH(qt-dir, [ --with-qt-dir where the root of Qt is installed ], +- [ qt_cv_dir=`eval echo "$withval"/` ]) +- +- AC_ARG_WITH(qt-includes, [ --with-qt-includes where the Qt includes are. ], +- [ qt_cv_includes=`eval echo "$withval"` ]) +- +- AC_ARG_WITH(qt-libraries, [ --with-qt-libraries where the Qt library is installed.], +- [ qt_cv_libraries=`eval echo "$withval"` ]) +- +- dnl pay attention to $QTDIR unless overridden +- if test -z "$qt_cv_dir"; then +- qt_cv_dir=$QTDIR +- fi +- +- dnl derive inc/lib if needed +- if test -n "$qt_cv_dir"; then +- if test -z "$qt_cv_includes"; then +- qt_cv_includes=$qt_cv_dir/include +- fi +- if test -z "$qt_cv_libraries"; then +- qt_cv_libraries=$qt_cv_dir/lib +- fi +- fi +- +- dnl flags for compilation +- QT_INCLUDES= +- QT_LDFLAGS= +- if test -n "$qt_cv_includes"; then +- QT_INCLUDES="-isystem $qt_cv_includes" +- fi +- if test -n "$qt_cv_libraries"; then +- QT_LDFLAGS="-L$qt_cv_libraries" +- fi +- AC_SUBST(QT_INCLUDES) +- AC_SUBST(QT_LDFLAGS) +- +- QT_FIND_MOC +- MOC=$ac_moc +- AC_SUBST(MOC) +- QT_FIND_UIC +- UIC=$ac_uic +- AC_SUBST(UIC) +- +- QT_CHECK_COMPILE +- +- QT_LIB=$qt_cv_libname; +- AC_SUBST(QT_LIB) +- +- if test -n "$qt_cv_libname"; then +- QT_GET_VERSION +- fi +-]) +diff --git a/m4/qt4.m4 b/m4/qt4.m4 +new file mode 100644 +index 0000000..0df96f7 +--- /dev/null ++++ b/m4/qt4.m4 +@@ -0,0 +1,211 @@ ++dnl check a particular libname ++AC_DEFUN([QT4_TRY_LINK], ++[ ++ SAVE_LIBS="$LIBS" ++ LIBS="$LIBS $1" ++ AC_TRY_LINK([ ++ #include <qglobal.h> ++ #include <qstring.h> ++ ], ++ [ ++ QString s("mangle_failure"); ++ #if (QT_VERSION < 400) ++ break_me_(\\\); ++ #endif ++ ], ++ qt4_cv_libname=$1, ++ ) ++ LIBS="$SAVE_LIBS" ++]) ++ ++dnl check we can do a compile ++AC_DEFUN([QT4_CHECK_COMPILE], ++[ ++ AC_MSG_CHECKING([for Qt 4 library name]) ++ ++ AC_CACHE_VAL(qt4_cv_libname, ++ [ ++ AC_LANG_CPLUSPLUS ++ SAVE_CXXFLAGS=$CXXFLAGS ++ CXXFLAGS="$CXXFLAGS $QT4_INCLUDES $QT4_LDFLAGS" ++ for libname in -lQtCore -lQtCore4 ++ do ++ QT4_TRY_LINK($libname) ++ if test -n "$qt4_cv_libname"; then ++ QT4_CORE_LIB="$qt4_cv_libname" ++ break; ++ fi ++ done ++ qt4_cv_libname= ++ for libname in '-lQtCore -lQtGui' \ ++ '-lQtCore4 -lQtGui4' ++ do ++ QT4_TRY_LINK($libname) ++ if test -n "$qt4_cv_libname"; then ++ break; ++ fi ++ done ++ CXXFLAGS=$SAVE_CXXFLAGS ++ ]) ++ ++ if test -z "$qt4_cv_libname"; then ++ AC_MSG_RESULT([failed]) ++ if test "$FATAL" = 1 ; then ++ AC_MSG_ERROR([Cannot compile a simple Qt 4 executable. Check you have the right \$QT4DIR !]) ++ fi ++ else ++ AC_MSG_RESULT([$qt4_cv_libname]) ++ fi ++]) ++ ++dnl get Qt version we're using ++AC_DEFUN([QT4_GET_VERSION], ++[ ++ AC_CACHE_CHECK([Qt 4 version],lyx_cv_qt4version, ++ [ ++ AC_LANG_CPLUSPLUS ++ SAVE_CPPFLAGS=$CPPFLAGS ++ CPPFLAGS="$CPPFLAGS $QT4_INCLUDES" ++ ++ cat > conftest.$ac_ext <<EOF ++#line __oline__ "configure" ++#include "confdefs.h" ++#include <qglobal.h> ++"%%%"QT_VERSION_STR"%%%" ++EOF ++ lyx_cv_qt4version=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \ ++ grep '^"%%%"' 2>/dev/null | \ ++ sed -e 's/"%%%"//g' -e 's/"//g'` ++ rm -f conftest.$ac_ext ++ CPPFLAGS=$SAVE_CPPFLAGS ++ ]) ++ ++ QT4_VERSION=$lyx_cv_qt4version ++ AC_SUBST(QT4_VERSION) ++]) ++ ++dnl start here ++AC_DEFUN([QT4_DO_IT_ALL], ++[ ++ dnl this variable is precious ++ AC_ARG_VAR(QT4DIR, [the place where the Qt 4 files are, e.g. /usr/lib/qt4]) ++ ++ dnl Please leave this alone. I use this file in ++ dnl oprofile. ++ FATAL=0 ++ ++ AC_ARG_WITH(qt4-dir, [ --with-qt4-dir where the root of Qt 4 is installed ], ++ [ qt4_cv_dir=`eval echo "$withval"/` ]) ++ ++ AC_ARG_WITH(qt4-includes, [ --with-qt4-includes where the Qt 4 includes are. ], ++ [ qt4_cv_includes=`eval echo "$withval"` ]) ++ ++ AC_ARG_WITH(qt4-libraries, [ --with-qt4-libraries where the Qt 4 library is installed.], ++ [ qt4_cv_libraries=`eval echo "$withval"` ]) ++ ++ dnl pay attention to $QT4DIR unless overridden ++ if test -z "$qt4_cv_dir"; then ++ qt4_cv_dir=$QT4DIR ++ fi ++ ++ dnl derive inc/lib if needed ++ if test -n "$qt4_cv_dir"; then ++ if test -z "$qt4_cv_includes"; then ++ qt4_cv_includes=$qt4_cv_dir/include ++ fi ++ if test -z "$qt4_cv_libraries"; then ++ qt4_cv_libraries=$qt4_cv_dir/lib ++ fi ++ fi ++ ++ dnl compute the binary dir too ++ if test -n "$qt4_cv_dir"; then ++ qt4_cv_bin=$qt4_cv_dir/bin ++ fi ++ ++ dnl Preprocessor flags ++ QT4_CPPFLAGS="-DQT_NO_STL -DQT_NO_KEYWORDS" ++ case ${host} in ++ *mingw*) QT4_CPPFLAGS="-DQT_DLL $QT4_CPPFLAGS";; ++ esac ++ AC_SUBST(QT4_CPPFLAGS) ++ ++ dnl Check if it possible to do a pkg-config ++ PKG_PROG_PKG_CONFIG ++ if test -n "$PKG_CONFIG" ; then ++ QT4_DO_PKG_CONFIG ++ fi ++ if test "$pkg_failed" != "no" ; then ++ QT4_DO_MANUAL_CONFIG ++ fi ++ AC_PATH_PROGS(MOC4, [moc-qt4 moc],[],$qt4_cv_bin:$PATH) ++ AC_PATH_PROGS(UIC4, [uic-qt4 uic],[],$qt4_cv_bin:$PATH) ++ AC_PATH_PROGS(RCC4, [rcc-qt4 rcc],[],$qt4_cv_bin:$PATH) ++]) ++ ++AC_DEFUN([QT4_DO_PKG_CONFIG], ++[ ++ dnl tell pkg-config to look also in $qt4_cv_dir/lib. ++ save_PKG_CONFIG_PATH=$PKG_CONFIG_PATH ++ if test -n "$qt4_cv_dir" ; then ++ PKG_CONFIG_PATH=$qt4_cv_dir/lib:$qt4_cv_dir/lib/pkgconfig:$PKG_CONFIG_PATH ++ export PKG_CONFIG_PATH ++ fi ++ PKG_CHECK_MODULES(QT4_CORE, QtCore,,[:]) ++ if test "$pkg_failed" = "no" ; then ++ QT4_CORE_INCLUDES=$QT4_CORE_CFLAGS ++ AC_SUBST(QT4_CORE_INCLUDES) ++ QT4_CORE_LDFLAGS=`$PKG_CONFIG --libs-only-L QtCore` ++ AC_SUBST(QT4_CORE_LDFLAGS) ++ QT4_CORE_LIB=`$PKG_CONFIG --libs-only-l QtCore` ++ AC_SUBST(QT4_CORE_LIB) ++ fi ++ PKG_CHECK_MODULES(QT4_FRONTEND, QtCore QtGui,,[:]) ++ if test "$pkg_failed" = "no" ; then ++ QT4_INCLUDES=$QT4_FRONTEND_CFLAGS ++ dnl QT4_LDFLAGS=$QT4_FRONTEND_LIBS ++ QT4_LDFLAGS=`$PKG_CONFIG --libs-only-L QtCore QtGui` ++ AC_SUBST(QT4_INCLUDES) ++ AC_SUBST(QT4_LDFLAGS) ++ QT4_VERSION=`$PKG_CONFIG --modversion QtCore` ++ AC_SUBST(QT4_VERSION) ++ QT4_LIB=`$PKG_CONFIG --libs-only-l QtCore QtGui` ++ AC_SUBST(QT4_LIB) ++ LIBS="$LIBS `$PKG_CONFIG --libs-only-other QtCore QtGui`" ++ fi ++ PKG_CONFIG_PATH=$save_PKG_CONFIG_PATH ++]) ++ ++AC_DEFUN([QT4_DO_MANUAL_CONFIG], ++[ ++ dnl flags for compilation ++ QT4_INCLUDES= ++ QT4_LDFLAGS= ++ QT4_CORE_INCLUDES= ++ QT4_CORE_LDFLAGS= ++ if test -n "$qt4_cv_includes"; then ++ QT4_INCLUDES="-I$qt4_cv_includes" ++ for i in Qt QtCore QtGui; do ++ QT4_INCLUDES="$QT4_INCLUDES -I$qt4_cv_includes/$i" ++ done ++ QT4_CORE_INCLUDES="-I$qt4_cv_includes -I$qt4_cv_includes/QtCore" ++ fi ++ if test -n "$qt4_cv_libraries"; then ++ QT4_LDFLAGS="-L$qt4_cv_libraries" ++ QT4_CORE_LDFLAGS="-L$qt4_cv_libraries" ++ fi ++ AC_SUBST(QT4_INCLUDES) ++ AC_SUBST(QT4_CORE_INCLUDES) ++ AC_SUBST(QT4_LDFLAGS) ++ AC_SUBST(QT4_CORE_LDFLAGS) ++ ++ QT4_CHECK_COMPILE ++ ++ QT4_LIB=$qt4_cv_libname; ++ AC_SUBST(QT4_LIB) ++ AC_SUBST(QT4_CORE_LIB) ++ ++ if test -n "$qt4_cv_libname"; then ++ QT4_GET_VERSION ++ fi ++]) diff --git a/source/d/perl/perl.SlackBuild b/source/d/perl/perl.SlackBuild index 9aa963d6a..a58d8a7ed 100755 --- a/source/d/perl/perl.SlackBuild +++ b/source/d/perl/perl.SlackBuild @@ -24,22 +24,24 @@ # originally by: David Cantrell <david@slackware.com> # maintained by: <volkerdi@slackware.com> -VERSION=5.10.0 +VERSION=5.10.1 # IMPORTANT: also update -Dinc_version_list in ./configure below! ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-perl # Additional required modules: -DBI=1.607 -DBDMYSQL=4.008 +DBDMYSQL=4.013 +DBI=1.609 +URI=1.40 XMLPARSER=2.36 XMLSIMPLE=2.18 -URI=1.37 if [ "$ARCH" = "i386" ]; then SLKCFLAGS="-O2 -march=i386 -mcpu=i686" @@ -70,7 +72,7 @@ mkdir -p $PKG # Extract the source code: cd $TMP rm -rf perl-$VERSION -tar xvf $CWD/perl-$VERSION.tar.bz2 +tar xvf $CWD/perl-$VERSION.tar.?z* || exit 1 # Change into the source directory: cd perl-$VERSION @@ -115,7 +117,7 @@ fi -Doptimize="$SLKCFLAGS" \ $USE_THREADS \ -Dpager='/usr/bin/less -isr' \ - -Dinc_version_list='5.8.8 5.8.7 5.8.6 5.8.5 5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' \ + -Dinc_version_list='5.10.0 5.8.8 5.8.7 5.8.6 5.8.5 5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' \ -Darchname=$ARCH-linux # Kludge for gcc-4.2.4's needlessly changed output: @@ -125,7 +127,7 @@ cat x2p/makefile | grep -v '\<command-line\>' > foo mv foo x2p/makefile # Build perl -make -j6 || exit 1 +make $NUMJOBS || exit 1 make test # Install perl (needed to build modules): @@ -257,11 +259,26 @@ fi # Insert the slack-desc: mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -zcat $CWD/doinst.sh.gz | \ - sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" | sed -e "s#i486#$ARCH#" \ + + +cat << EOF | sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" | sed -e "s#i486#$ARCH#" \ > $PKG/install/doinst.sh +#!/bin/sh +config() { + NEW="\$1" + OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r \$OLD ]; then + mv \$NEW \$OLD + elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy + rm \$NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} +config usr/lib/perl5/${VERSION}/i486-linux-thread-multi/perllocal.pod.new +EOF # Build the package: cd $PKG -makepkg -l y -c n $TMP/perl-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/perl-$VERSION-$ARCH-$BUILD.txz diff --git a/source/d/python/python.SlackBuild b/source/d/python/python.SlackBuild index 88445fd8d..faa2b2523 100755 --- a/source/d/python/python.SlackBuild +++ b/source/d/python/python.SlackBuild @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.6.2} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +VERSION=${VERSION:-2.6.4} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-python diff --git a/source/d/rcs/rcs.SlackBuild b/source/d/rcs/rcs.SlackBuild index 4ea46e465..7a3980179 100755 --- a/source/d/rcs/rcs.SlackBuild +++ b/source/d/rcs/rcs.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,15 +21,26 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=5.7 -ARCH=${ARCH:-x86_64} BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -48,7 +59,7 @@ echo "| rcs-$VERSION |" echo "+=========+" cd $TMP rm -rf rcs-$VERSION -tar xvf $CWD/rcs-$VERSION.tar.gz | exit 1 +tar xvf $CWD/rcs-$VERSION.tar.gz || exit 1 cd rcs-$VERSION chown -R root:root . diff --git a/source/d/ruby/ruby.SlackBuild b/source/d/ruby/ruby.SlackBuild index 96234b8ff..0ff662102 100755 --- a/source/d/ruby/ruby.SlackBuild +++ b/source/d/ruby/ruby.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.8.7-p174 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=ruby +VERSION=$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1,2 -d - | rev) BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-ruby @@ -48,10 +59,6 @@ rm -rf ruby-$VERSION tar xvf $CWD/ruby-$VERSION.tar.?z* || exit 1 cd ruby-$VERSION || exit 1 -if [ "$ARCH" = "x86_64" ]; then - zcat $CWD/ruby.x86_64.diff.gz | patch -p1 --verbose || exit 1 -fi - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -70,20 +77,40 @@ CFLAGS="$SLKCFLAGS" \ --datadir=/usr/share \ --docdir=/usr/doc/ruby-$VERSION \ --enable-shared \ + --enable-pthread \ --enable-install-doc \ - --enable-static \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +# This symlink is needed by things that include ruby/config.h. +( cd $PKG/usr/include/ + if [ ! -e ruby -a -d ruby-*/*-*/ruby ]; then + ln -s ruby-*/*-*/ruby . + fi +) + +# These include files are no longer installed as of ruby-1.9.1, but +# kdebindings will not compile without them. Try to remove these +# from the package later if the situation changes. +mkdir -p $PKG/usr/include/ruby-$(echo $VERSION | cut -f 1 -d -)/ruby +cp -a node.h version.h revision.h \ + $PKG/usr/include/ruby-$(echo $VERSION | cut -f 1 -d -)/ruby + mkdir -p $PKG/usr/doc/ruby-$VERSION cp -a \ - COPYING* *GPL* LEGAL NEWS README* ToDo \ + COPYING* *GPL* ChangeLog LEGAL NEWS README* ToDo \ $PKG/usr/doc/ruby-$VERSION +# The entire ChangeLog is excessive for most users: +cat $PKG/usr/doc/ruby-$VERSION/ChangeLog | head -n 1000 > $PKG/usr/doc/ruby-$VERSION/CL +mv $PKG/usr/doc/ruby-$VERSION/CL $PKG/usr/doc/ruby-$VERSION/ChangeLog + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +find $PKG | xargs file | grep -e "current ar archive" \ + | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null # Compress and if needed symlink the man pages: if [ -d $PKG/usr/man ]; then diff --git a/source/d/ruby/ruby.x86_64.diff b/source/d/ruby/ruby.x86_64.diff deleted file mode 100644 index c557546d7..000000000 --- a/source/d/ruby/ruby.x86_64.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ruby-1.8.7-p160.orig/mkconfig.rb 2008-06-06 12:39:57.000000000 +0200 -+++ ruby-1.8.7-p160/mkconfig.rb 2009-04-29 20:33:58.000000000 +0200 -@@ -102,7 +102,7 @@ - - drive = File::PATH_SEPARATOR == ';' - --prefix = '/lib/ruby/' + RUBY_VERSION.sub(/\.\d+$/, '') + '/' + RUBY_PLATFORM -+prefix = '/lib64/ruby/' + RUBY_VERSION.sub(/\.\d+$/, '') + '/' + RUBY_PLATFORM - print " TOPDIR = File.dirname(__FILE__).chomp!(#{prefix.dump})\n" - print " DESTDIR = ", (drive ? "TOPDIR && TOPDIR[/\\A[a-z]:/i] || " : ""), "'' unless defined? DESTDIR\n" - print " CONFIG = {}\n" diff --git a/source/d/subversion/slack-desc b/source/d/subversion/slack-desc index 935a52212..af2ef0b61 100644 --- a/source/d/subversion/slack-desc +++ b/source/d/subversion/slack-desc @@ -15,5 +15,5 @@ subversion: systems like CVS, RCS or SCCS. Subversion keeps all the information subversion: to permit extracting previous versions of those files at any time. subversion: subversion: For more information about the Subversion project, visit: -subversion: http://subversion.tigris.org +subversion: http://subversion.apache.org subversion: diff --git a/source/d/subversion/subversion.SlackBuild b/source/d/subversion/subversion.SlackBuild index 87a7114e0..c2b01e83b 100755 --- a/source/d/subversion/subversion.SlackBuild +++ b/source/d/subversion/subversion.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.6.4 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo subversion-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +59,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf subversion-$VERSION -tar xvf $CWD/subversion-$VERSION.tar.xz || exit 1 +tar xvf $CWD/subversion-$VERSION.tar.?z* || exit 1 cd subversion-$VERSION || exit 1 chown -R root:root . @@ -115,7 +128,7 @@ rm -rf $PKG/usr/build mkdir -p $PKG/usr/doc/subversion-$VERSION cp -a \ - BUGS CHANGES COMMITTERS COPYING* HACKING INSTALL README TRANSLATING doc \ + BUGS COMMITTERS COPYING* HACKING INSTALL README TRANSLATING doc \ $PKG/usr/doc/subversion-$VERSION # too big && useless for most || if you think not, can be found in the source tarball rm -rf $PKG/usr/doc/subversion-$VERSION/doc/tools @@ -135,20 +148,20 @@ rm -rf $PKG/usr/doc/subversion-$VERSION/doc/tools -exec chmod 644 {} \; ) +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + # This removes our DESTDIR from the packlist filenames, to keep perl's # internal inventories consistent and correct. find $PKG -name .packlist | while read plist ; do - sed -e "s%/share/man%/man%g" \ - -e "s%$PKG%%g" \ - -e "s%\.1$%\.1\.gz%g" \ - -e "s%\.2$%\.2\.gz%g" \ - -e "s%\.3$%\.3\.gz%g" \ - -e "s%\.3pm$%\.3pm\.gz%g" \ - -e "s%\.4$%\.4\.gz%g" \ - -e "s%\.5$%\.5\.gz%g" \ - -e "s%\.6$%\.6\.gz%g" \ - -e "s%\.7$%\.7\.gz%g" \ - -e "s%\.8$%\.8\.gz%g" \ + sed -e "s%$PKG%%g" \ + -e "s%/share/man%/man%g" \ + -re "s%\.([1-9]n?|3pm)$%&.gz%g # extend man filenames for .gz" \ ${plist} > ${plist}.new mv -f ${plist}.new ${plist} done diff --git a/source/e/emacs/emacs.SlackBuild b/source/e/emacs/emacs.SlackBuild index 962e9ee4c..77b1fb636 100755 --- a/source/e/emacs/emacs.SlackBuild +++ b/source/e/emacs/emacs.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -26,11 +26,19 @@ # Modified by Robby Workman <rworkman@slackbuilds.org> # Modified by Patrick Volkerding <volkerdi@slackware.com> -PRGNAM=emacs -VERSION=22.3 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-3} +PKGNAM=emacs +VERSION=${VERSION:-23.2} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,16 +50,18 @@ elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" fi +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -86,9 +96,9 @@ make install DESTDIR=$PKG || exit 1 # Also add a version of the binary that is not linked to X11: cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -96,6 +106,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +zcat $CWD/emacs.gtk-menu.patch.gz | patch -p1 || exit 1 +zcat $CWD/emacs.libpng14.patch.gz | patch -p1 || exit 1 + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ @@ -139,33 +152,15 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ gzip -9 * ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* ChangeLog INSTALL README \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -cat $CWD/doinst.sh > $PKG/install/doinst.sh - -# Make the .desktop file -mkdir -p $PKG/usr/share/applications -cat << "EOF" > $PKG/usr/share/applications/$PRGNAM.desktop -[Desktop Entry] -Encoding=UTF-8 -Type=Application -Exec=emacs -Icon=emacs.png -Terminal=0 -Name=Emacs -Comment=Text Editor -Categories=Application;Development; -EOF - -# Make the package freedesktop compliant -mkdir -p $PKG/usr/share/icons/hicolor/48x48/apps -cat $PKG/usr/share/$PRGNAM/$VERSION/etc/images/icons/emacs_48.png > $PKG/usr/share/icons/hicolor/48x48/apps/emacs.png +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/installer/busybox-1.12.1_inotify.diff b/source/installer/busybox-1.12.1_inotify.diff deleted file mode 100644 index 151d16ce9..000000000 --- a/source/installer/busybox-1.12.1_inotify.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- busybox-1.12.1.orig/miscutils/inotifyd.c 2008-11-07 01:39:21.000000000 +0000 -+++ busybox-1.12.1/miscutils/inotifyd.c 2008-11-07 01:37:05.000000000 +0000 -@@ -28,7 +28,7 @@ - */ - - #include "libbb.h" --#include <linux/inotify.h> -+#include <sys/inotify.h> - - static volatile smallint signalled; - diff --git a/source/installer/busybox-dot-config b/source/installer/busybox-dot-config index 69b07295c..4c77cb6ff 100644 --- a/source/installer/busybox-dot-config +++ b/source/installer/busybox-dot-config @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Busybox version: 1.12.1 -# Mon Mar 30 16:14:53 2009 +# Busybox version: 1.15.3 +# Wed Dec 30 20:01:35 2009 # CONFIG_HAVE_DOT_CONFIG=y @@ -14,7 +14,6 @@ CONFIG_HAVE_DOT_CONFIG=y # CONFIG_DESKTOP=y # CONFIG_EXTRA_COMPAT is not set -# CONFIG_FEATURE_ASSUME_UNICODE is not set CONFIG_FEATURE_BUFFERS_USE_MALLOC=y # CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set # CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set @@ -23,7 +22,9 @@ CONFIG_FEATURE_VERBOSE_USAGE=y CONFIG_FEATURE_COMPRESS_USAGE=y CONFIG_FEATURE_INSTALLER=y CONFIG_LOCALE_SUPPORT=y -CONFIG_GETOPT_LONG=y +# CONFIG_FEATURE_ASSUME_UNICODE is not set +# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set +CONFIG_LONG_OPTS=y CONFIG_FEATURE_DEVPTS=y # CONFIG_FEATURE_CLEAN_UP is not set CONFIG_FEATURE_PIDFILE=y @@ -34,7 +35,7 @@ CONFIG_FEATURE_SUID_CONFIG_QUIET=y # CONFIG_FEATURE_PREFER_APPLETS is not set CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" CONFIG_FEATURE_SYSLOG=y -CONFIG_FEATURE_HAVE_RPC=y +# CONFIG_FEATURE_HAVE_RPC is not set # # Build Options @@ -47,6 +48,7 @@ CONFIG_FEATURE_HAVE_RPC=y # CONFIG_FEATURE_SHARED_BUSYBOX is not set CONFIG_LFS=y CONFIG_CROSS_COMPILER_PREFIX="" +CONFIG_EXTRA_CFLAGS="" # # Debugging Options @@ -58,7 +60,6 @@ CONFIG_NO_DEBUG_LIB=y # CONFIG_DMALLOC is not set # CONFIG_EFENCE is not set CONFIG_INCLUDE_SUSv2=y -# CONFIG_PARSE is not set # # Installation Options @@ -88,6 +89,8 @@ CONFIG_FEATURE_EDITING_HISTORY=64 CONFIG_FEATURE_TAB_COMPLETION=y # CONFIG_FEATURE_USERNAME_COMPLETION is not set CONFIG_FEATURE_EDITING_FANCY_PROMPT=y +# CONFIG_FEATURE_EDITING_ASK_TERMINAL is not set +CONFIG_FEATURE_NON_POSIX_CP=y CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y CONFIG_FEATURE_COPYBUF_KB=4 CONFIG_MONOTONIC_SYSCALL=y @@ -111,11 +114,14 @@ CONFIG_BUNZIP2=y CONFIG_BZIP2=y CONFIG_CPIO=y CONFIG_FEATURE_CPIO_O=y +# CONFIG_FEATURE_CPIO_P is not set # CONFIG_DPKG is not set # CONFIG_DPKG_DEB is not set # CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set # CONFIG_GUNZIP is not set # CONFIG_GZIP is not set +# CONFIG_LZOP is not set +# CONFIG_LZOP_COMPR_HIGH is not set # CONFIG_RPM2CPIO is not set # CONFIG_RPM is not set # CONFIG_TAR is not set @@ -153,7 +159,7 @@ CONFIG_DD=y CONFIG_FEATURE_DD_SIGNAL_HANDLING=y CONFIG_FEATURE_DD_IBS_OBS=y CONFIG_DF=y -CONFIG_FEATURE_DF_INODE=y +CONFIG_FEATURE_DF_FANCY=y CONFIG_DIRNAME=y CONFIG_DOS2UNIX=y CONFIG_UNIX2DOS=y @@ -169,6 +175,7 @@ CONFIG_EXPR=y CONFIG_EXPR_MATH_SUPPORT_64=y CONFIG_FALSE=y # CONFIG_FOLD is not set +CONFIG_FSYNC=y CONFIG_HEAD=y CONFIG_FEATURE_FANCY_HEAD=y # CONFIG_HOSTID is not set @@ -208,6 +215,8 @@ CONFIG_RMDIR=y # CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set # CONFIG_SEQ is not set # CONFIG_SHA1SUM is not set +# CONFIG_SHA256SUM is not set +# CONFIG_SHA512SUM is not set CONFIG_SLEEP=y CONFIG_FEATURE_FANCY_SLEEP=y # CONFIG_FEATURE_FLOAT_SLEEP is not set @@ -283,6 +292,8 @@ CONFIG_FEATURE_RESIZE_PRINT=y CONFIG_SETCONSOLE=y CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y # CONFIG_SETFONT is not set +# CONFIG_FEATURE_SETFONT_TEXTUAL_MAP is not set +CONFIG_DEFAULT_SETFONT_DIR="" CONFIG_SETKEYCODES=y CONFIG_SETLOGCONS=y CONFIG_SHOWKEY=y @@ -304,7 +315,7 @@ CONFIG_WHICH=y # Editors # CONFIG_AWK=y -CONFIG_FEATURE_AWK_MATH=y +CONFIG_FEATURE_AWK_LIBM=y # CONFIG_CMP is not set CONFIG_DIFF=y CONFIG_FEATURE_DIFF_BINARY=y @@ -367,7 +378,6 @@ CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y # Init Utilities # CONFIG_INIT=y -# CONFIG_DEBUG_INIT is not set CONFIG_FEATURE_USE_INITTAB=y CONFIG_FEATURE_KILL_REMOVED=y CONFIG_FEATURE_KILL_DELAY=10 @@ -377,6 +387,8 @@ CONFIG_FEATURE_EXTRA_QUIET=y # CONFIG_FEATURE_INIT_COREDUMPS is not set # CONFIG_FEATURE_INITRD is not set CONFIG_HALT=y +# CONFIG_FEATURE_CALL_TELINIT is not set +CONFIG_TELINIT_PATH="" CONFIG_MESG=y # @@ -386,13 +398,17 @@ CONFIG_FEATURE_SHADOWPASSWDS=y # CONFIG_USE_BB_PWD_GRP is not set # CONFIG_USE_BB_SHADOW is not set CONFIG_USE_BB_CRYPT=y +# CONFIG_USE_BB_CRYPT_SHA is not set CONFIG_ADDGROUP=y +CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y CONFIG_FEATURE_ADDUSER_TO_GROUP=y CONFIG_DELGROUP=y CONFIG_FEATURE_DEL_USER_FROM_GROUP=y CONFIG_FEATURE_CHECK_NAMES=y CONFIG_ADDUSER=y # CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set +CONFIG_FIRST_SYSTEM_ID=100 +CONFIG_LAST_SYSTEM_ID=9999 CONFIG_DELUSER=y # CONFIG_GETTY is not set CONFIG_FEATURE_UTMP=y @@ -425,32 +441,35 @@ CONFIG_FEATURE_SU_CHECKS_SHELLS=y # CONFIG_MODPROBE_SMALL is not set # CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set # CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set -# CONFIG_DEPMOD is not set -# CONFIG_FEATURE_DEPMOD_PRUNE_FANCY is not set -# CONFIG_FEATURE_DEPMOD_ALIAS is not set # CONFIG_INSMOD is not set -# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set -# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set -# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set -# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set # CONFIG_RMMOD is not set # CONFIG_LSMOD is not set # CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set # CONFIG_MODPROBE is not set -# CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS is not set -# CONFIG_FEATURE_MODPROBE_FANCY_ALIAS is not set # CONFIG_FEATURE_MODPROBE_BLACKLIST is not set -# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set +# CONFIG_DEPMOD is not set + +# +# Options common to multiple modutils +# # CONFIG_FEATURE_2_4_MODULES is not set -# CONFIG_FEATURE_2_6_MODULES is not set +# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set +# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set +# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set +# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set +# CONFIG_FEATURE_MODUTILS_ALIAS is not set +# CONFIG_FEATURE_MODUTILS_SYMBOLS is not set CONFIG_DEFAULT_MODULES_DIR="" CONFIG_DEFAULT_DEPMOD_FILE="" -# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set # # Linux System Utilities # +# CONFIG_ACPID is not set +# CONFIG_FEATURE_ACPID_COMPAT is not set +# CONFIG_BLKID is not set CONFIG_DMESG=y CONFIG_FEATURE_DMESG_PRETTY=y CONFIG_FBSET=y @@ -471,7 +490,9 @@ CONFIG_FDISK_SUPPORT_LARGE_DISKS=y # CONFIG_FSCK_MINIX is not set # CONFIG_MKFS_MINIX is not set # CONFIG_FEATURE_MINIX2 is not set +# CONFIG_MKFS_VFAT is not set # CONFIG_GETOPT is not set +# CONFIG_FEATURE_GETOPT_LONG is not set CONFIG_HEXDUMP=y # CONFIG_FEATURE_HEXDUMP_REVERSE is not set # CONFIG_HD is not set @@ -488,10 +509,10 @@ CONFIG_LOSETUP=y # CONFIG_FEATURE_MDEV_EXEC is not set # CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set # CONFIG_MKSWAP is not set -# CONFIG_FEATURE_MKSWAP_V0 is not set +# CONFIG_FEATURE_MKSWAP_UUID is not set CONFIG_MORE=y CONFIG_FEATURE_USE_TERMIOS=y -CONFIG_VOLUMEID=y +# CONFIG_VOLUMEID is not set # CONFIG_FEATURE_VOLUMEID_EXT is not set # CONFIG_FEATURE_VOLUMEID_REISERFS is not set # CONFIG_FEATURE_VOLUMEID_FAT is not set @@ -523,6 +544,7 @@ CONFIG_RDEV=y # CONFIG_READPROFILE is not set # CONFIG_RTCWAKE is not set # CONFIG_SCRIPT is not set +# CONFIG_SCRIPTREPLAY is not set # CONFIG_SETARCH is not set CONFIG_SWAPONOFF=y CONFIG_FEATURE_SWAPON_PRI=y @@ -537,6 +559,9 @@ CONFIG_SWITCH_ROOT=y # # CONFIG_ADJTIMEX is not set CONFIG_BBCONFIG=y +# CONFIG_BEEP is not set +CONFIG_FEATURE_BEEP_FREQ=0 +CONFIG_FEATURE_BEEP_LENGTH_MS=0 # CONFIG_CHAT is not set # CONFIG_FEATURE_CHAT_NOFAIL is not set # CONFIG_FEATURE_CHAT_TTY_HIFI is not set @@ -547,18 +572,25 @@ CONFIG_BBCONFIG=y # CONFIG_FEATURE_CHAT_CLR_ABORT is not set # CONFIG_CHRT is not set # CONFIG_CROND is not set -# CONFIG_DEBUG_CROND_OPTION is not set +# CONFIG_FEATURE_CROND_D is not set # CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set +CONFIG_FEATURE_CROND_DIR="" # CONFIG_CRONTAB is not set # CONFIG_DC is not set +# CONFIG_FEATURE_DC_LIBM is not set # CONFIG_DEVFSD is not set # CONFIG_DEVFSD_MODLOAD is not set # CONFIG_DEVFSD_FG_NP is not set # CONFIG_DEVFSD_VERBOSE is not set # CONFIG_FEATURE_DEVFS is not set +# CONFIG_DEVMEM is not set CONFIG_EJECT=y CONFIG_FEATURE_EJECT_SCSI=y # CONFIG_FBSPLASH is not set +# CONFIG_FLASH_LOCK is not set +# CONFIG_FLASH_UNLOCK is not set +# CONFIG_FLASH_ERASEALL is not set +CONFIG_IONICE=y # CONFIG_INOTIFYD is not set # CONFIG_LAST is not set # CONFIG_FEATURE_LAST_SMALL is not set @@ -567,9 +599,11 @@ CONFIG_LESS=y CONFIG_FEATURE_LESS_MAXLINES=9999999 CONFIG_FEATURE_LESS_BRACKETS=y CONFIG_FEATURE_LESS_FLAGS=y -CONFIG_FEATURE_LESS_FLAGCS=y CONFIG_FEATURE_LESS_MARKS=y CONFIG_FEATURE_LESS_REGEXP=y +# CONFIG_FEATURE_LESS_WINCH is not set +# CONFIG_FEATURE_LESS_DASHCMD is not set +# CONFIG_FEATURE_LESS_LINENUMS is not set # CONFIG_HDPARM is not set # CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set # CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set @@ -593,13 +627,16 @@ CONFIG_RUNLEVEL=y # CONFIG_TASKSET is not set # CONFIG_FEATURE_TASKSET_FANCY is not set CONFIG_TIME=y +CONFIG_TIMEOUT=y CONFIG_TTYSIZE=y +# CONFIG_VOLNAME is not set # CONFIG_WATCHDOG is not set # # Networking Utilities # CONFIG_FEATURE_IPV6=y +# CONFIG_FEATURE_UNIX_LOCAL is not set CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y # CONFIG_VERBOSE_RESOLUTION_ERRORS is not set CONFIG_ARP=y @@ -610,6 +647,8 @@ CONFIG_BRCTL=y # CONFIG_DNSD is not set CONFIG_ETHER_WAKE=y # CONFIG_FAKEIDENTD is not set +# CONFIG_FTPD is not set +# CONFIG_FEATURE_FTP_WRITE is not set CONFIG_FTPGET=y CONFIG_FTPPUT=y CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y @@ -617,11 +656,9 @@ CONFIG_HOSTNAME=y # CONFIG_HTTPD is not set # CONFIG_FEATURE_HTTPD_RANGES is not set # CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set -# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set # CONFIG_FEATURE_HTTPD_SETUID is not set # CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set # CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set -# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set # CONFIG_FEATURE_HTTPD_CGI is not set # CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set # CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set @@ -635,6 +672,7 @@ CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y CONFIG_FEATURE_IFCONFIG_HW=y CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y CONFIG_IFENSLAVE=y +# CONFIG_IFPLUGD is not set CONFIG_IFUPDOWN=y CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" # CONFIG_FEATURE_IFUPDOWN_IP is not set @@ -681,8 +719,6 @@ CONFIG_PING6=y CONFIG_FEATURE_FANCY_PING=y CONFIG_PSCAN=y CONFIG_ROUTE=y -# CONFIG_SENDMAIL is not set -# CONFIG_FETCHMAIL is not set CONFIG_SLATTACH=y CONFIG_TELNET=y CONFIG_FEATURE_TELNET_TTYPE=y @@ -694,7 +730,7 @@ CONFIG_TFTP=y CONFIG_FEATURE_TFTP_GET=y CONFIG_FEATURE_TFTP_PUT=y CONFIG_FEATURE_TFTP_BLOCKSIZE=y -# CONFIG_DEBUG_TFTP is not set +# CONFIG_TFTP_DEBUG is not set CONFIG_TRACEROUTE=y # CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set # CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set @@ -707,10 +743,11 @@ CONFIG_DHCPD_LEASES_FILE="" # CONFIG_APP_UDHCPC is not set # CONFIG_FEATURE_UDHCPC_ARPING is not set # CONFIG_FEATURE_UDHCP_PORT is not set -# CONFIG_FEATURE_UDHCP_DEBUG is not set -# CONFIG_FEATURE_RFC3397 is not set -CONFIG_DHCPC_DEFAULT_SCRIPT="" -CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS= +CONFIG_UDHCP_DEBUG=0 +# CONFIG_FEATURE_UDHCP_RFC3397 is not set +CONFIG_UDHCPC_DEFAULT_SCRIPT="" +CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=0 +CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="" CONFIG_VCONFIG=y CONFIG_WGET=y CONFIG_FEATURE_WGET_STATUSBAR=y @@ -718,9 +755,29 @@ CONFIG_FEATURE_WGET_AUTHENTICATION=y CONFIG_FEATURE_WGET_LONG_OPTIONS=y CONFIG_ZCIP=y CONFIG_TCPSVD=y +# CONFIG_TUNCTL is not set +# CONFIG_FEATURE_TUNCTL_UG is not set CONFIG_UDPSVD=y # +# Print Utilities +# +# CONFIG_LPD is not set +# CONFIG_LPR is not set +# CONFIG_LPQ is not set + +# +# Mail Utilities +# +# CONFIG_MAKEMIME is not set +CONFIG_FEATURE_MIME_CHARSET="" +# CONFIG_POPMAILDIR is not set +# CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set +# CONFIG_REFORMIME is not set +# CONFIG_FEATURE_REFORMIME_COMPAT is not set +# CONFIG_SENDMAIL is not set + +# # Process Utilities # CONFIG_FREE=y @@ -737,36 +794,62 @@ CONFIG_PKILL=y CONFIG_PS=y CONFIG_FEATURE_PS_WIDE=y CONFIG_FEATURE_PS_TIME=y +# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set # CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set CONFIG_RENICE=y CONFIG_BB_SYSCTL=y CONFIG_TOP=y CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y +# CONFIG_FEATURE_TOP_SMP_CPU is not set CONFIG_FEATURE_TOP_DECIMALS=y +# CONFIG_FEATURE_TOP_SMP_PROCESS is not set CONFIG_FEATURE_TOPMEM=y CONFIG_UPTIME=y CONFIG_WATCH=y # +# Runit Utilities +# +# CONFIG_RUNSV is not set +# CONFIG_RUNSVDIR is not set +# CONFIG_FEATURE_RUNSVDIR_LOG is not set +# CONFIG_SV is not set +CONFIG_SV_DEFAULT_SERVICE_DIR="" +# CONFIG_SVLOGD is not set +# CONFIG_CHPST is not set +# CONFIG_SETUIDGID is not set +# CONFIG_ENVUIDGID is not set +# CONFIG_ENVDIR is not set +# CONFIG_SOFTLIMIT is not set +# CONFIG_CHCON is not set +# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set +# CONFIG_GETENFORCE is not set +# CONFIG_GETSEBOOL is not set +# CONFIG_LOAD_POLICY is not set +# CONFIG_MATCHPATHCON is not set +# CONFIG_RESTORECON is not set +# CONFIG_RUNCON is not set +# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set +# CONFIG_SELINUXENABLED is not set +# CONFIG_SETENFORCE is not set +# CONFIG_SETFILES is not set +# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set +# CONFIG_SETSEBOOL is not set +# CONFIG_SESTATUS is not set + +# # Shells # CONFIG_FEATURE_SH_IS_ASH=y # CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_MSH is not set # CONFIG_FEATURE_SH_IS_NONE is not set CONFIG_ASH=y - -# -# Ash Shell Options -# CONFIG_ASH_BASH_COMPAT=y CONFIG_ASH_JOB_CONTROL=y CONFIG_ASH_READ_NCHARS=y CONFIG_ASH_READ_TIMEOUT=y CONFIG_ASH_ALIAS=y -CONFIG_ASH_MATH_SUPPORT=y -CONFIG_ASH_MATH_SUPPORT_64=y CONFIG_ASH_GETOPTS=y CONFIG_ASH_BUILTIN_ECHO=y CONFIG_ASH_BUILTIN_PRINTF=y @@ -777,6 +860,7 @@ CONFIG_ASH_OPTIMIZE_FOR_SIZE=y CONFIG_ASH_RANDOM_SUPPORT=y CONFIG_ASH_EXPAND_PRMT=y # CONFIG_HUSH is not set +# CONFIG_HUSH_BASH_COMPAT is not set # CONFIG_HUSH_HELP is not set # CONFIG_HUSH_INTERACTIVE is not set # CONFIG_HUSH_JOB is not set @@ -784,12 +868,13 @@ CONFIG_ASH_EXPAND_PRMT=y # CONFIG_HUSH_IF is not set # CONFIG_HUSH_LOOPS is not set # CONFIG_HUSH_CASE is not set +# CONFIG_HUSH_FUNCTIONS is not set +# CONFIG_HUSH_LOCAL is not set +# CONFIG_HUSH_EXPORT_N is not set # CONFIG_LASH is not set # CONFIG_MSH is not set - -# -# Bourne Shell Options -# +CONFIG_SH_MATH_SUPPORT=y +# CONFIG_SH_MATH_SUPPORT_64 is not set CONFIG_FEATURE_SH_EXTRA_QUIET=y # CONFIG_FEATURE_SH_STANDALONE is not set # CONFIG_FEATURE_SH_NOFORK is not set @@ -808,38 +893,3 @@ CONFIG_LOGREAD=y CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y CONFIG_KLOGD=y # CONFIG_LOGGER is not set - -# -# Runit Utilities -# -# CONFIG_RUNSV is not set -# CONFIG_RUNSVDIR is not set -# CONFIG_SV is not set -# CONFIG_SVLOGD is not set -# CONFIG_CHPST is not set -# CONFIG_SETUIDGID is not set -# CONFIG_ENVUIDGID is not set -# CONFIG_ENVDIR is not set -# CONFIG_SOFTLIMIT is not set -# CONFIG_CHCON is not set -# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set -# CONFIG_GETENFORCE is not set -# CONFIG_GETSEBOOL is not set -# CONFIG_LOAD_POLICY is not set -# CONFIG_MATCHPATHCON is not set -# CONFIG_RESTORECON is not set -# CONFIG_RUNCON is not set -# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set -# CONFIG_SELINUXENABLED is not set -# CONFIG_SETENFORCE is not set -# CONFIG_SETFILES is not set -# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set -# CONFIG_SETSEBOOL is not set -# CONFIG_SESTATUS is not set - -# -# Print Utilities -# -# CONFIG_LPD is not set -# CONFIG_LPR is not set -# CONFIG_LPQ is not set diff --git a/source/installer/busybox.2.6.32.2.diff b/source/installer/busybox.2.6.32.2.diff new file mode 100644 index 000000000..15757775c --- /dev/null +++ b/source/installer/busybox.2.6.32.2.diff @@ -0,0 +1,13 @@ +--- ./miscutils/eject.c.orig 2009-12-12 15:13:28.000000000 -0600 ++++ ./miscutils/eject.c 2009-12-31 14:04:20.000000000 -0600 +@@ -13,6 +13,10 @@ + * Most of the dirty work blatantly ripped off from cat.c =) + */ + ++/* kludge for 2.6.32.2 /usr/include/scsi/scsi.h */ ++#include <stdint.h> ++typedef uint8_t u8; ++ + #include <sys/mount.h> + #include "libbb.h" + /* Must be after libbb.h: they need size_t */ diff --git a/source/installer/busybox.SlackBuild b/source/installer/busybox.SlackBuild index adceb07c0..a80631e3b 100755 --- a/source/installer/busybox.SlackBuild +++ b/source/installer/busybox.SlackBuild @@ -21,7 +21,7 @@ PKGNAM=busybox -VERSION=${VERSION:-1.12.1} +VERSION=${VERSION:-1.15.3} ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} @@ -36,7 +36,7 @@ rm -rf ${PKGNAM}-${VERSION} tar xjvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 cd ${PKGNAM}-$VERSION || exit 1 -zcat $CWD/busybox-1.12.1_inotify.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/busybox.2.6.32.2.diff.gz | patch -p1 || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . diff --git a/source/n/dhcpcd/patches/config.h.diff b/source/installer/dhcpcd/config.h.diff index 7bdefb600..7bdefb600 100644 --- a/source/n/dhcpcd/patches/config.h.diff +++ b/source/installer/dhcpcd/config.h.diff diff --git a/source/n/dhcpcd/patches/dhcpcd.sh.diff b/source/installer/dhcpcd/dhcpcd.sh.diff index 290665a98..290665a98 100644 --- a/source/n/dhcpcd/patches/dhcpcd.sh.diff +++ b/source/installer/dhcpcd/dhcpcd.sh.diff diff --git a/source/k/2.6.29.x-intel-crash-patch.diff b/source/k/2.6.29.x-intel-crash-patch.diff deleted file mode 100644 index a4fcb4686..000000000 --- a/source/k/2.6.29.x-intel-crash-patch.diff +++ /dev/null @@ -1,37 +0,0 @@ - [Intel-gfx] [PATCH] drm/i915: Don't allow binding objects into the last page of the aperture. - - Eric Anholt eric at anholt.net - Tue May 12 15:29:56 PDT 2009 - - This should avoid a class of bugs where the hardware prefetches past the - end of the object, and walks into unallocated memory when the object is - bound to the last page of the aperture. - - fd.o bug #21488 - --- - drivers/gpu/drm/i915/i915_dma.c | 12 ++++++++++-- - 1 files changed, 10 insertions(+), 2 deletions(-) - - diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c - index 051134c..3133f99 100644 - --- a/drivers/gpu/drm/i915/i915_dma.c - +++ b/drivers/gpu/drm/i915/i915_dma.c - @@ -1011,8 +1011,16 @@ static int i915_load_modeset_init(struct drm_device *dev) - /* Basic memrange allocator for stolen space (aka vram) */ - drm_mm_init(&dev_priv->vram, 0, prealloc_size); - - - /* Let GEM Manage from end of prealloc space to end of aperture */ - - i915_gem_do_init(dev, prealloc_size, agp_size); - + /* Let GEM Manage from end of prealloc space to end of aperture. - + * - + * However, leave one page at the end still bound to the scratch page. - + * There are a number of places where the hardware apparently - + * prefetches past the end of the object, and we've seen multiple - + * hangs with the GPU head pointer stuck in a batchbuffer bound - + * at the last page of the aperture. One page should be enough to - + * keep any prefetching inside of the aperture. - + */ - + i915_gem_do_init(dev, prealloc_size, agp_size - 4096); - - ret = i915_gem_init_ringbuffer(dev); - diff --git a/source/k/README.TXT b/source/k/README.TXT index 13cdcb71d..1f45bfb20 100644 --- a/source/k/README.TXT +++ b/source/k/README.TXT @@ -13,7 +13,7 @@ For a 2.6.x kernel (much easier): Install a suitable .config, or use make menuconfig, etc. An example would be to use one of the config files here: - # cat config-generic-2.6.29.6 > /usr/src/linux-2.6.29.6/.config + # cat config-generic-2.6.33.4 > /usr/src/linux-2.6.33.4/.config Then run the build programs: diff --git a/source/k/README_SECURITY.TXT b/source/k/README_SECURITY.TXT deleted file mode 100644 index 6aaa7d665..000000000 --- a/source/k/README_SECURITY.TXT +++ /dev/null @@ -1,11 +0,0 @@ -Applying these patches: - -linux-2.6.29.6-01-sendpage.diff.gz -linux-2.6.29.6-02-default-mmap_min_addr-4096.diff.gz - -Is highly recommended if you are planning to use the 2.6.29.6 -kernel source in this directory. - -The kernel-source-2.6.29.6_smp-noarch-2.txz package already has -them preapplied. - diff --git a/source/k/README_SPEAKUP_PATCH.TXT b/source/k/README_SPEAKUP_PATCH.TXT index 9a9979b0b..8fd155961 100644 --- a/source/k/README_SPEAKUP_PATCH.TXT +++ b/source/k/README_SPEAKUP_PATCH.TXT @@ -10,19 +10,19 @@ need to do this: Untar the speakup archive, and cd into the speakup directory: -tar xf speakup-3.0.3_20081026.tar.bz2 -cd speakup-3.0.3_20081026 +tar xf speakup-2009-12-30.tar.xz +cd speakup-2009-12-30 Patch whatever kernel you happen to want to compile: -./install /usr/src/linux-2.6.29.6 +./install /usr/src/linux-2.6.33.4 Change to the kernel directory: -cd /usr/src/linux-2.6.29.6 +cd /usr/src/linux-2.6.33.4 If you want to start with the defaults one of Slackware's kernels, you can do that like this: -cat /boot/vmlinuz-huge-2.6.29.6 > .config +cat /boot/vmlinuz-huge-2.6.33.4 > .config Or, better yet, if you have access to the Slackware tree use the Speakup .config that was used: @@ -33,11 +33,14 @@ Then do any additional configuation to the kernel that you may require: make menuconfig +You might want to check in Device Drivers -> Accessibility -> Speakup +to make sure that Speakup support is configured to your liking. + After that, it's build and install: make make modules_install make bzImage -cat arch/x86/boot/bzImage > /boot/vmlinuz-huge-2.6.29.6-speakup +cat arch/x86/boot/bzImage > /boot/vmlinuz-huge-2.6.33.4-speakup I put the -speakup on the end of the kernel name so that I can remember which kernel I've patched, but that part is entirely optional. diff --git a/source/k/config-generic-2.6.29.6 b/source/k/config-generic-2.6.29.6 deleted file mode 100644 index 4a88a8ec9..000000000 --- a/source/k/config-generic-2.6.29.6 +++ /dev/null @@ -1,4178 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29.6 -# Mon Aug 17 02:22:45 2009 -# -CONFIG_64BIT=y -# CONFIG_X86_32 is not set -CONFIG_X86_64=y -CONFIG_X86=y -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_FAST_CMPXCHG_LOCAL=y -CONFIG_MMU=y -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_GPIO=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_ARCH_HAS_CPU_RELAX=y -CONFIG_ARCH_HAS_DEFAULT_IDLE=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ZONE_DMA32=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_AUDIT_ARCH=y -CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_USE_GENERIC_SMP_HELPERS=y -CONFIG_X86_64_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -# CONFIG_KTIME_SCALAR is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -# CONFIG_EMBEDDED is not set -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -CONFIG_COMPAT_BRK=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y -CONFIG_OPROFILE=m -# CONFIG_OPROFILE_IBS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_BLK_DEV_BSG=y -# CONFIG_BLK_DEV_INTEGRITY is not set -CONFIG_BLOCK_COMPAT=y - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_FREEZER=y - -# -# Processor type and features -# -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_SMP=y -# CONFIG_SPARSE_IRQ is not set -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_MPPARSE=y -CONFIG_X86_PC=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_VSMP is not set -CONFIG_SCHED_OMIT_FRAME_POINTER=y -# CONFIG_PARAVIRT_GUEST is not set -CONFIG_MEMTEST=y -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -CONFIG_GENERIC_CPU=y -CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 -CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_TSC=y -CONFIG_X86_CMPXCHG64=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=64 -CONFIG_X86_DEBUGCTLMSR=y -CONFIG_CPU_SUP_INTEL=y -CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR_64=y -# CONFIG_X86_DS is not set -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_DMI=y -CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set -# CONFIG_AMD_IOMMU is not set -CONFIG_SWIOTLB=y -CONFIG_IOMMU_HELPER=y -# CONFIG_IOMMU_API is not set -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -CONFIG_I8K=m -CONFIG_MICROCODE=m -CONFIG_MICROCODE_INTEL=y -CONFIG_MICROCODE_AMD=y -CONFIG_MICROCODE_OLD_INTERFACE=y -CONFIG_X86_MSR=m -CONFIG_X86_CPUID=m -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -CONFIG_DIRECT_GBPAGES=y -# CONFIG_NUMA is not set -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -# CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSEMEM_VMEMMAP=y - -# -# Memory hotplug is currently incompatible with Software Suspend -# -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_MMU_NOTIFIER=y -# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set -CONFIG_X86_RESERVE_LOW_64K=y -CONFIG_MTRR=y -CONFIG_MTRR_SANITIZER=y -CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 -CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -# CONFIG_X86_PAT is not set -# CONFIG_EFI is not set -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x200000 -CONFIG_HOTPLUG_CPU=y -CONFIG_COMPAT_VDSO=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y - -# -# Power management and ACPI options -# -CONFIG_ARCH_HIBERNATION_HEADER=y -CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP_SMP=y -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="\"\"" -CONFIG_ACPI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_PROCFS=y -CONFIG_ACPI_PROCFS_POWER=y -CONFIG_ACPI_SYSFS_POWER=y -CONFIG_ACPI_PROC_EVENT=y -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_DOCK=y -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_THERMAL=m -# CONFIG_ACPI_CUSTOM_DSDT is not set -CONFIG_ACPI_BLACKLIST_YEAR=0 -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_PCI_SLOT=m -CONFIG_X86_PM_TIMER=y -CONFIG_ACPI_CONTAINER=m -# CONFIG_ACPI_SBS is not set - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=m -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=m -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m - -# -# CPUFreq processor drivers -# -CONFIG_X86_ACPI_CPUFREQ=m -CONFIG_X86_POWERNOW_K8=m -CONFIG_X86_POWERNOW_K8_ACPI=y -CONFIG_X86_SPEEDSTEP_CENTRINO=m -CONFIG_X86_P4_CLOCKMOD=m - -# -# shared options -# -CONFIG_X86_SPEEDSTEP_LIB=m -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y - -# -# Memory power savings -# -CONFIG_I7300_IDLE_IOAT_CHANNEL=y -CONFIG_I7300_IDLE=m - -# -# Bus options (PCI etc.) -# -CONFIG_PCI=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_DOMAINS=y -# CONFIG_DMAR is not set -# CONFIG_INTR_REMAP is not set -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=m -CONFIG_PCIEAER=y -# CONFIG_PCIEASPM is not set -CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y -# CONFIG_PCI_STUB is not set -CONFIG_HT_IRQ=y -CONFIG_ISA_DMA_API=y -CONFIG_K8_NB=y -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_TOSHIBA=y -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_PCCARD_NONSTATIC=m -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_FAKE=m -CONFIG_HOTPLUG_PCI_ACPI=m -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -# CONFIG_HOTPLUG_PCI_CPCI is not set -CONFIG_HOTPLUG_PCI_SHPC=m - -# -# Executable file formats / Emulations -# -CONFIG_BINFMT_ELF=y -CONFIG_COMPAT_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=m -CONFIG_COMPAT=y -CONFIG_COMPAT_FOR_U64_ALIGNMENT=y -CONFIG_SYSVIPC_COMPAT=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_LRO=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=m -CONFIG_IPV6_PRIVACY=y -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETLABEL is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=y - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -# CONFIG_NF_CONNTRACK_EVENTS is not set -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_TPROXY=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_VS=m -# CONFIG_IP_VS_IPV6 is not set -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_DCCP=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_PROTO_UDPLITE=m -CONFIG_NF_NAT_PROTO_SCTP=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m - -# -# DECnet: Netfilter Configuration -# -# CONFIG_DECNET_NF_GRABULATOR is not set -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_ULOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -# CONFIG_IP_DCCP_CCID3 is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -CONFIG_TIPC=m -# CONFIG_TIPC_ADVANCED is not set -# CONFIG_TIPC_DEBUG is not set -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_BRIDGE=m -# CONFIG_NET_DSA is not set -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=y -CONFIG_LLC2=m -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -CONFIG_WAN_ROUTER=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_INGRESS=m - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -# CONFIG_NET_EMATCH is not set -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=y -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -# CONFIG_AX25_DAMA_SLAVE is not set -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -CONFIG_6PACK=m -CONFIG_BPQETHER=m -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BAYCOM_PAR=m -CONFIG_YAM=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -# CONFIG_CAN_DEBUG_DEVICES is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_TOIM3232_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_KINGSUN_DONGLE=m -CONFIG_KSDAZZLE_DONGLE=m -CONFIG_KS959_DONGLE=m - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_SIGMATEL_FIR=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m -CONFIG_VIA_FIR=m -CONFIG_MCS_FIR=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -CONFIG_AF_RXRPC=m -# CONFIG_AF_RXRPC_DEBUG is not set -CONFIG_RXKAD=m -CONFIG_PHONET=m -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_CFG80211=m -# CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y -CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m - -# -# Rate control algorithm selection -# -CONFIG_MAC80211_RC_MINSTREL=y -# CONFIG_MAC80211_RC_DEFAULT_PID is not set -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=m -CONFIG_RFKILL_INPUT=m -CONFIG_RFKILL_LEDS=y -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -CONFIG_CONNECTOR=m -CONFIG_MTD=m -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_TESTS=m -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_AR7_PARTS=m - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_HAVE_MTD_OTP=y -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_MTD_OOPS=m - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_MAP_BANK_WIDTH_8=y -CONFIG_MTD_MAP_BANK_WIDTH_16=y -CONFIG_MTD_MAP_BANK_WIDTH_32=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_I4=y -CONFIG_MTD_CFI_I8=y -CONFIG_MTD_OTP=y -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -CONFIG_MTD_SC520CDP=m -CONFIG_MTD_NETSC520=m -CONFIG_MTD_TS5500=m -CONFIG_MTD_SBC_GXX=m -CONFIG_MTD_AMD76XROM=m -CONFIG_MTD_ICHXROM=m -CONFIG_MTD_ESB2ROM=m -CONFIG_MTD_CK804XROM=m -CONFIG_MTD_SCB2_FLASH=m -CONFIG_MTD_NETtel=m -CONFIG_MTD_DILNETPC=m -CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000 -CONFIG_MTD_L440GX=m -CONFIG_MTD_PCI=m -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -CONFIG_MTD_PMC551_BUGFIX=y -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLOCK2MTD=m - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -CONFIG_MTD_DOC2001PLUS=m -CONFIG_MTD_DOCPROBE=m -CONFIG_MTD_DOCECC=m -CONFIG_MTD_DOCPROBE_ADVANCED=y -CONFIG_MTD_DOCPROBE_ADDRESS=0x0000 -CONFIG_MTD_DOCPROBE_HIGH=y -CONFIG_MTD_DOCPROBE_55AA=y -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_MUSEUM_IDS=y -CONFIG_MTD_NAND_IDS=m -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y -CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ALAUDA=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_OTP=y -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_ONENAND_SIM=m - -# -# LPDDR flash memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m - -# -# UBI - Unsorted block images -# -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_MTD_UBI_GLUEBI=y - -# -# UBI debugging options -# -# CONFIG_MTD_UBI_DEBUG is not set -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_SERIAL=m -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_PC_PCMCIA=m -# CONFIG_PARPORT_GSC is not set -CONFIG_PARPORT_AX88796=m -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -CONFIG_PNP_DEBUG_MESSAGES=y - -# -# Protocols -# -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y -CONFIG_PARIDE=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_CPQ_DA=m -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SX8=m -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_BLK_DEV_XIP is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_VIRTIO_BLK=m -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -CONFIG_IBM_ASM=m -CONFIG_PHANTOM=m -CONFIG_SGI_IOC4=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -CONFIG_SGI_XP=m -CONFIG_HP_ILO=m -CONFIG_SGI_GRU=m -# CONFIG_SGI_GRU_DEBUG is not set -CONFIG_DELL_LAPTOP=m -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_93CX6=m -CONFIG_HAVE_IDE=y -CONFIG_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -CONFIG_IDE_TIMINGS=y -CONFIG_IDE_ATAPI=y -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -CONFIG_IDE_GD_ATAPI=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_DELKIN=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -CONFIG_BLK_DEV_PLATFORM=m -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -CONFIG_BLK_DEV_IDEPNP=y -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CS5520=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_JMICRON=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8172=y -CONFIG_BLK_DEV_IT8213=y -CONFIG_BLK_DEV_IT821X=y -# CONFIG_BLK_DEV_NS87415 is not set -CONFIG_BLK_DEV_PDC202XX_OLD=y -CONFIG_BLK_DEV_PDC202XX_NEW=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_BLK_DEV_TC86C001=y -CONFIG_BLK_DEV_IDEDMA=y - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=y -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_TGT=y -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_FC_TGT_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC7XXX_OLD=m -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=4 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_ARCMSR=m -# CONFIG_SCSI_ARCMSR_AER is not set -CONFIG_MEGARAID_NEWGEN=y -CONFIG_MEGARAID_MM=m -CONFIG_MEGARAID_MAILBOX=m -CONFIG_MEGARAID_LEGACY=m -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_HPTIOP=m -CONFIG_SCSI_BUSLOGIC=m -CONFIG_LIBFC=m -CONFIG_FCOE=m -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_MVSAS=m -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_QLA_FC=m -CONFIG_SCSI_QLA_ISCSI=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_DC390T=m -CONFIG_SCSI_DEBUG=m -CONFIG_SCSI_SRP=m -CONFIG_SCSI_LOWLEVEL_PCMCIA=y -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=m -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_ATA_ACPI=y -CONFIG_SATA_PMP=y -CONFIG_SATA_AHCI=y -CONFIG_SATA_SIL24=y -CONFIG_ATA_SFF=y -CONFIG_SATA_SVW=y -CONFIG_ATA_PIIX=y -CONFIG_SATA_MV=y -CONFIG_SATA_NV=y -CONFIG_PDC_ADMA=y -CONFIG_SATA_QSTOR=y -CONFIG_SATA_PROMISE=y -CONFIG_SATA_SX4=y -CONFIG_SATA_SIL=y -CONFIG_SATA_SIS=y -CONFIG_SATA_ULI=y -CONFIG_SATA_VIA=y -CONFIG_SATA_VITESSE=y -CONFIG_SATA_INIC162X=y -CONFIG_PATA_ACPI=y -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CS5520=m -CONFIG_PATA_CS5530=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m -CONFIG_ATA_GENERIC=y -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m -CONFIG_PATA_HPT3X3_DMA=y -CONFIG_PATA_IT821X=m -CONFIG_PATA_IT8213=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_TRIFLEX=m -CONFIG_PATA_MARVELL=m -CONFIG_PATA_MPIIX=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_OPTIDMA=m -CONFIG_PATA_PCMCIA=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RZ1000=m -CONFIG_PATA_SC1200=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_SIL680=m -CONFIG_PATA_SIS=y -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m -CONFIG_PATA_SCH=m -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_AUTODETECT=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=y -CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=y -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=y -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=y -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -# CONFIG_FUSION_LOGGING is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=m -CONFIG_IEEE1394_OHCI1394=m -CONFIG_IEEE1394_PCILYNX=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_DV1394=m -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -CONFIG_I2O=m -CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y -CONFIG_I2O_EXT_ADAPTEC=y -CONFIG_I2O_EXT_ADAPTEC_DMA64=y -CONFIG_I2O_CONFIG=m -# CONFIG_I2O_CONFIG_OLD_IOCTL is not set -CONFIG_I2O_BUS=m -CONFIG_I2O_BLOCK=m -CONFIG_I2O_SCSI=m -CONFIG_I2O_PROC=m -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_MAC_EMUMOUSEBTN=y -CONFIG_NETDEVICES=y -CONFIG_IFB=m -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -CONFIG_NET_SB1000=m -CONFIG_ARCNET=m -CONFIG_ARCNET_1201=m -CONFIG_ARCNET_1051=m -CONFIG_ARCNET_RAW=m -CONFIG_ARCNET_CAP=m -CONFIG_ARCNET_COM90xx=m -CONFIG_ARCNET_COM90xxIO=m -CONFIG_ARCNET_RIM_I=m -CONFIG_ARCNET_COM20020=m -CONFIG_ARCNET_COM20020_PCI=m -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_STE10XP=m -CONFIG_LSI_ET1011C_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_MDIO_GPIO=m -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -CONFIG_HAPPYMEAL=m -CONFIG_SUNGEM=m -CONFIG_CASSINI=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_DNET=m -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -CONFIG_TULIP_MMIO=y -# CONFIG_TULIP_NAPI is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_HP100=m -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_AMD8111_ETH=m -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_FORCEDETH=m -CONFIG_FORCEDETH_NAPI=y -CONFIG_E100=m -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R6040=m -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SMSC9420=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_SC92031=m -CONFIG_NET_POCKET=y -CONFIG_ATP=m -CONFIG_DE600=m -CONFIG_DE620=m -CONFIG_ATL2=m -CONFIG_NETDEV_1000=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_DL2K=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_IP1000=m -CONFIG_IGB=m -# CONFIG_IGB_LRO is not set -CONFIG_IGB_DCA=y -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_R8169_VLAN=y -CONFIG_SIS190=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_VIA_VELOCITY=m -CONFIG_TIGON3=m -CONFIG_BNX2=m -CONFIG_QLA3XXX=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_JME=m -CONFIG_NETDEV_10000=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3_DEPENDS=y -CONFIG_CHELSIO_T3=m -CONFIG_ENIC=m -CONFIG_IXGBE=m -CONFIG_IXGBE_DCA=y -CONFIG_IXGB=m -CONFIG_S2IO=m -CONFIG_MYRI10GE=m -CONFIG_MYRI10GE_DCA=y -CONFIG_NETXEN_NIC=m -CONFIG_NIU=m -CONFIG_MLX4_EN=m -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_TEHUTI=m -CONFIG_BNX2X=m -CONFIG_QLGE=m -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_BE2NET=m -CONFIG_TR=y -CONFIG_IBMOL=m -CONFIG_3C359=m -CONFIG_TMS380TR=m -CONFIG_TMSPCI=m -CONFIG_ABYSS=m - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM=m -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AIRO_CS=m -CONFIG_PCMCIA_WL3501=m -CONFIG_PRISM54=m -CONFIG_USB_ZD1201=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_ADM8211=m -# CONFIG_MAC80211_HWSIM is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -CONFIG_ATH9K=m -# CONFIG_ATH9K_DEBUG is not set -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLWIFI=m -CONFIG_IWLCORE=m -CONFIG_IWLWIFI_LEDS=y -# CONFIG_IWLWIFI_RFKILL is not set -# CONFIG_IWLWIFI_DEBUG is not set -CONFIG_IWLAGN=m -CONFIG_IWLAGN_SPECTRUM_MEASUREMENT=y -CONFIG_IWLAGN_LEDS=y -CONFIG_IWL4965=y -CONFIG_IWL5000=y -CONFIG_IWL3945=m -# CONFIG_IWL3945_RFKILL is not set -CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y -CONFIG_IWL3945_LEDS=y -# CONFIG_IWL3945_DEBUG is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_B43=m -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_PCMCIA=y -CONFIG_B43_PIO=y -CONFIG_B43_LEDS=y -CONFIG_B43_RFKILL=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_RFKILL=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_RFKILL=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_SDIO=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_EPSON2888 is not set -# CONFIG_USB_KC2190 is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_HSO=m -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PCMCIA_AXNET=m -CONFIG_ARCNET_COM20020_CS=m -CONFIG_PCMCIA_IBMTR=m -CONFIG_WAN=y -CONFIG_LANMEDIA=m -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m - -# -# X.25/LAPB support is disabled -# -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -# CONFIG_PC300TOO is not set -CONFIG_FARSYNC=m -CONFIG_DSCC4=m -# CONFIG_DSCC4_PCISYNC is not set -# CONFIG_DSCC4_PCI_RST is not set -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 -CONFIG_WAN_ROUTER_DRIVERS=m -CONFIG_CYCLADES_SYNC=m -CONFIG_CYCLOMX_X25=y -CONFIG_SBNI=m -# CONFIG_SBNI_MULTILINE is not set -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -CONFIG_ATM_TCP=m -CONFIG_ATM_LANAI=m -CONFIG_ATM_ENI=m -# CONFIG_ATM_ENI_DEBUG is not set -# CONFIG_ATM_ENI_TUNE_BURST is not set -CONFIG_ATM_FIRESTREAM=m -CONFIG_ATM_ZATM=m -# CONFIG_ATM_ZATM_DEBUG is not set -CONFIG_ATM_IDT77252=m -# CONFIG_ATM_IDT77252_DEBUG is not set -# CONFIG_ATM_IDT77252_RCV_ALL is not set -CONFIG_ATM_IDT77252_USE_SUNI=y -CONFIG_ATM_AMBASSADOR=m -# CONFIG_ATM_AMBASSADOR_DEBUG is not set -CONFIG_ATM_HORIZON=m -# CONFIG_ATM_HORIZON_DEBUG is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -CONFIG_ATM_HE=m -# CONFIG_ATM_HE_USE_SUNI is not set -CONFIG_ATM_SOLOS=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_PLIP=m -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_PPPOATM=m -CONFIG_PPPOL2TP=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLHC=m -CONFIG_SLIP_SMART=y -# CONFIG_SLIP_MODE_SLIP6 is not set -CONFIG_NET_FC=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_VIRTIO_NET=m -CONFIG_ISDN=y -CONFIG_MISDN=m -CONFIG_MISDN_DSP=m -CONFIG_MISDN_L1OIP=m - -# -# mISDN hardware drivers -# -CONFIG_MISDN_HFCPCI=m -CONFIG_MISDN_HFCMULTI=m -CONFIG_MISDN_HFCUSB=m -CONFIG_ISDN_I4L=m -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_IPPP_FILTER=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DIVERSION=m - -# -# ISDN4Linux hardware drivers -# - -# -# Passive cards -# -CONFIG_ISDN_DRV_HISAX=m - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -CONFIG_DE_AOC=y -CONFIG_HISAX_NO_SENDCOMPLETE=y -CONFIG_HISAX_NO_LLC=y -CONFIG_HISAX_NO_KEYPAD=y -CONFIG_HISAX_1TR6=y -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_3=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -# CONFIG_HISAX_DEBUG is not set - -# -# HiSax PCMCIA card service modules -# -CONFIG_HISAX_SEDLBAUER_CS=m -CONFIG_HISAX_ELSA_CS=m -CONFIG_HISAX_AVM_A1_CS=m -CONFIG_HISAX_TELES_CS=m - -# -# HiSax sub driver modules -# -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_HFCUSB=m -CONFIG_HISAX_HFC4S8S=m -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_HISAX_HDLC=y - -# -# Active cards -# -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y -CONFIG_ISDN_DRV_GIGASET=m -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -# CONFIG_GIGASET_M101 is not set -# CONFIG_GIGASET_DEBUG is not set -# CONFIG_GIGASET_UNDOCREQ is not set -CONFIG_ISDN_CAPI=m -CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y -CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIFS_BOOL=y -CONFIG_ISDN_CAPI_CAPIFS=m -CONFIG_ISDN_CAPI_CAPIDRV=m - -# -# CAPI hardware drivers -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_AVM_CS=m -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_CAPI_EICON=y -CONFIG_ISDN_DIVAS=m -CONFIG_ISDN_DIVAS_BRIPCI=y -CONFIG_ISDN_DIVAS_PRIPCI=y -CONFIG_ISDN_DIVAS_DIVACAPI=m -CONFIG_ISDN_DIVAS_USERIDI=m -CONFIG_ISDN_DIVAS_MAINT=m -CONFIG_PHONE=m -CONFIG_PHONE_IXJ=m -CONFIG_PHONE_IXJ_PCMCIA=m - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=y -CONFIG_INPUT_POLLDEV=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_ELANTECH is not set -CONFIG_MOUSE_PS2_TOUCHKIT=y -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -CONFIG_TOUCHSCREEN_MTOUCH=m -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_UCB1400=m -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -CONFIG_TOUCHSCREEN_TSC2007=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_PCSPKR=m -CONFIG_INPUT_APANEL=m -CONFIG_INPUT_ATLAS_BTNS=m -CONFIG_INPUT_ATI_REMOTE=m -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -CONFIG_INPUT_UINPUT=m -CONFIG_INPUT_PCF50633_PMU=m - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_CT82C710=m -CONFIG_SERIO_PARKBD=m -CONFIG_SERIO_PCIPS2=m -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m -CONFIG_GAMEPORT=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_GAMEPORT_EMU10K1=m -CONFIG_GAMEPORT_FM801=m - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_DEVKMEM=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_DIGIEPCA=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_ISI=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_SYNCLINK_GT=m -CONFIG_N_HDLC=m -CONFIG_RISCOM8=m -CONFIG_SPECIALIX=m -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set -CONFIG_STALDRV=y -CONFIG_STALLION=m -CONFIG_ISTALLION=m -CONFIG_NOZOMI=m - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_JSM=m -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -CONFIG_LP_CONSOLE=y -CONFIG_PPDEV=m -CONFIG_HVC_DRIVER=y -CONFIG_VIRTIO_CONSOLE=m -CONFIG_IPMI_HANDLER=m -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=m -CONFIG_HW_RANDOM_AMD=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_NVRAM=m -CONFIG_R3964=m -CONFIG_APPLICOM=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_CARDMAN_4000=m -CONFIG_CARDMAN_4040=m -CONFIG_IPWIRELESS=m -CONFIG_MWAVE=m -CONFIG_PC8736x_GPIO=m -CONFIG_NSC_GPIO=m -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set -CONFIG_HANGCHECK_TIMER=m -CONFIG_TCG_TPM=m -# CONFIG_TCG_TIS is not set -# CONFIG_TCG_NSC is not set -CONFIG_TCG_ATMEL=m -# CONFIG_TCG_INFINEON is not set -CONFIG_TELCLOCK=m -CONFIG_DEVPORT=y -CONFIG_I2C=m -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI1563=m -CONFIG_I2C_ALI15X3=m -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD756_S4882=m -CONFIG_I2C_AMD8111=m -CONFIG_I2C_I801=m -CONFIG_I2C_ISCH=m -CONFIG_I2C_PIIX4=m -CONFIG_I2C_NFORCE2=m -CONFIG_I2C_NFORCE2_S4985=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS96X=m -CONFIG_I2C_VIA=m -CONFIG_I2C_VIAPRO=m - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_GPIO=m -CONFIG_I2C_OCORES=m -CONFIG_I2C_SIMTEC=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_PARPORT=m -CONFIG_I2C_PARPORT_LIGHT=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m - -# -# Graphics adapter I2C/DDC channel drivers -# -CONFIG_I2C_VOODOO3=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_PCA_PLATFORM=m -CONFIG_I2C_STUB=m - -# -# Miscellaneous I2C Chip support -# -CONFIG_DS1682=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_MAX6875=m -CONFIG_SENSORS_TSL2550=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y - -# -# Memory mapped GPIO expanders: -# - -# -# I2C GPIO expanders: -# -CONFIG_GPIO_MAX732X=m -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -CONFIG_W1_MASTER_MATROX=m -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_GPIO=m - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -CONFIG_W1_SLAVE_DS2433_CRC=y -CONFIG_W1_SLAVE_DS2760=m -CONFIG_W1_SLAVE_BQ27000=m -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_PDA_POWER=m -CONFIG_WM8350_POWER=m -CONFIG_BATTERY_DS2760=m -CONFIG_BATTERY_BQ27x00=m -CONFIG_CHARGER_PCF50633=m -CONFIG_HWMON=m -CONFIG_HWMON_VID=m -CONFIG_SENSORS_ABITUGURU=m -CONFIG_SENSORS_ABITUGURU3=m -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7473=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_K8TEMP=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_I5K_AMB=m -CONFIG_SENSORS_F71805F=m -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_FSCHER=m -CONFIG_SENSORS_FSCPOS=m -CONFIG_SENSORS_FSCHMD=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_CORETEMP=m -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_LM93=m -CONFIG_SENSORS_LTC4245=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_MAX6650=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_SMSC47M192=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83L786NG=m -CONFIG_SENSORS_W83627HF=m -CONFIG_SENSORS_W83627EHF=m -CONFIG_SENSORS_HDAPS=m -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_SENSORS_APPLESMC=m -# CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_THERMAL=m -CONFIG_THERMAL_HWMON=y -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_WM8350_WATCHDOG=m -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM1535_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_SC520_WDT=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_IBMASR=m -CONFIG_WAFER_WDT=m -CONFIG_I6300ESB_WDT=m -CONFIG_ITCO_WDT=m -CONFIG_ITCO_VENDOR_SUPPORT=y -CONFIG_IT8712F_WDT=m -CONFIG_IT87_WDT=m -CONFIG_HP_WATCHDOG=m -CONFIG_SC1200_WDT=m -CONFIG_PC87413_WDT=m -CONFIG_60XX_WDT=m -CONFIG_SBC8360_WDT=m -CONFIG_CPU5_WDT=m -CONFIG_SMSC_SCH311X_WDT=m -CONFIG_SMSC37B787_WDT=m -CONFIG_W83627HF_WDT=m -CONFIG_W83697HF_WDT=m -CONFIG_W83697UG_WDT=m -CONFIG_W83877F_WDT=m -CONFIG_W83977F_WDT=m -CONFIG_MACHZ_WDT=m -CONFIG_SBC_EPX_C3_WATCHDOG=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m -CONFIG_WDT_501_PCI=y - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y -CONFIG_SSB_PCMCIAHOST=y -# CONFIG_SSB_DEBUG is not set -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=m -# CONFIG_MFD_SM501 is not set -CONFIG_HTC_PASIC3=m -CONFIG_UCB1400_CORE=m -CONFIG_TPS65010=m -# CONFIG_MFD_TMIO is not set -CONFIG_MFD_WM8400=m -CONFIG_MFD_WM8350=m -CONFIG_MFD_WM8350_I2C=m -CONFIG_MFD_PCF50633=m -CONFIG_PCF50633_ADC=m -CONFIG_PCF50633_GPIO=m -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_MEDIA_ATTACH=y -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_CUSTOMIZE=y -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L1=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEOBUF_DVB=m -CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_VIDEO_TUNER=m -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set -CONFIG_VIDEO_IR_I2C=m - -# -# Encoders/decoders and other helper chips -# - -# -# Audio decoders -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TDA9875=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_M52790=m -CONFIG_VIDEO_TLV320AIC23B=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m - -# -# Video decoders -# -CONFIG_VIDEO_BT819=m -CONFIG_VIDEO_BT856=m -CONFIG_VIDEO_BT866=m -CONFIG_VIDEO_KS0127=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_TCM825X=m -CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA7111=m -CONFIG_VIDEO_SAA7114=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_SAA7191=m -CONFIG_VIDEO_TVP514X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_VPX3220=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_CX25840=m - -# -# MPEG video encoders -# -CONFIG_VIDEO_CX2341X=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_SAA7185=m -CONFIG_VIDEO_ADV7170=m -CONFIG_VIDEO_ADV7175=m - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m -CONFIG_VIDEO_VIVI=m -CONFIG_VIDEO_BT848=m -CONFIG_VIDEO_BT848_DVB=y -CONFIG_VIDEO_SAA6588=m -CONFIG_VIDEO_BWQCAM=m -CONFIG_VIDEO_CQCAM=m -CONFIG_VIDEO_W9966=m -CONFIG_VIDEO_CPIA=m -CONFIG_VIDEO_CPIA_PP=m -CONFIG_VIDEO_CPIA_USB=m -CONFIG_VIDEO_CPIA2=m -CONFIG_VIDEO_SAA5246A=m -CONFIG_VIDEO_SAA5249=m -CONFIG_VIDEO_STRADIS=m -CONFIG_VIDEO_ZORAN=m -CONFIG_VIDEO_ZORAN_DC30=m -CONFIG_VIDEO_ZORAN_ZR36060=m -CONFIG_VIDEO_ZORAN_BUZ=m -CONFIG_VIDEO_ZORAN_DC10=m -CONFIG_VIDEO_ZORAN_LML33=m -CONFIG_VIDEO_ZORAN_LML33R10=m -CONFIG_VIDEO_ZORAN_AVS6EYES=m -CONFIG_VIDEO_MEYE=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_DVB=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX23885=m -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_IVTV=m -CONFIG_VIDEO_FB_IVTV=m -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_MT9M001=m -CONFIG_MT9M001_PCA9536_SWITCH=y -CONFIG_SOC_CAMERA_MT9M111=m -CONFIG_SOC_CAMERA_MT9T031=m -CONFIG_SOC_CAMERA_MT9V022=m -CONFIG_MT9V022_PCA9536_SWITCH=y -CONFIG_SOC_CAMERA_TW9910=m -CONFIG_SOC_CAMERA_PLATFORM=m -CONFIG_SOC_CAMERA_OV772X=m -CONFIG_V4L_USB_DRIVERS=y -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -CONFIG_USB_QUICKCAM_MESSENGER=m -CONFIG_USB_ET61X251=m -CONFIG_VIDEO_OVCAMCHIP=m -CONFIG_USB_W9968CF=m -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -CONFIG_USB_ZC0301=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_GEMTEK_PCI=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_MAESTRO=m -CONFIG_USB_DSBR=m -CONFIG_USB_SI470X=m -CONFIG_USB_MR800=m -CONFIG_RADIO_TEA5764=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m - -# -# Supported USB Adapters -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_SIANO_SMS1XXX=m -CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y - -# -# Supported FlexCopII (B2C2) Adapters -# -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set - -# -# Supported BT878 Adapters -# -CONFIG_DVB_BT8XX=m - -# -# Supported Pluto2 Adapters -# -CONFIG_DVB_PLUTO2=m - -# -# Supported SDMC DM1105 Adapters -# -CONFIG_DVB_DM1105=m - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_IEEE1394=y -CONFIG_DVB_FIREDTV_INPUT=y - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -CONFIG_DVB_FE_CUSTOMISE=y - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_SI21XX=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRX397XD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3304=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_LNBP21=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_LGS8GL5=m - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -CONFIG_DVB_AF9013=m -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -CONFIG_AGP=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=m -CONFIG_AGP_SIS=m -CONFIG_AGP_VIA=m -CONFIG_DRM=m -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_I810=m -CONFIG_DRM_I830=m -CONFIG_DRM_I915=m -# CONFIG_DRM_I915_KMS is not set -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m -CONFIG_DRM_VIA=m -CONFIG_DRM_SAVAGE=m -CONFIG_VGASTATE=m -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_BOOT_VESA_SUPPORT=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -CONFIG_FB_SYS_FILLRECT=m -CONFIG_FB_SYS_COPYAREA=m -CONFIG_FB_SYS_IMAGEBLIT=m -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=m -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_HECUBA=m -CONFIG_FB_SVGALIB=m -# CONFIG_FB_MACMODES is not set -CONFIG_FB_BACKLIGHT=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -CONFIG_FB_CIRRUS=m -CONFIG_FB_PM2=m -# CONFIG_FB_PM2_FIFO_DISCONNECT is not set -CONFIG_FB_CYBER2000=m -CONFIG_FB_ARC=m -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -CONFIG_FB_VGA16=m -# CONFIG_FB_UVESA is not set -CONFIG_FB_VESA=y -CONFIG_FB_N411=m -CONFIG_FB_HGA=m -# CONFIG_FB_HGA_ACCEL is not set -CONFIG_FB_S1D13XXX=m -CONFIG_FB_NVIDIA=m -CONFIG_FB_NVIDIA_I2C=y -# CONFIG_FB_NVIDIA_DEBUG is not set -CONFIG_FB_NVIDIA_BACKLIGHT=y -CONFIG_FB_RIVA=m -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_RIVA_BACKLIGHT=y -CONFIG_FB_LE80578=m -CONFIG_FB_CARILLO_RANCH=m -CONFIG_FB_INTEL=m -# CONFIG_FB_INTEL_DEBUG is not set -CONFIG_FB_INTEL_I2C=y -CONFIG_FB_MATROX=m -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -CONFIG_FB_MATROX_I2C=m -CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_MATROX_MULTIHEAD=y -CONFIG_FB_RADEON=m -CONFIG_FB_RADEON_I2C=y -CONFIG_FB_RADEON_BACKLIGHT=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=m -CONFIG_FB_ATY128_BACKLIGHT=y -CONFIG_FB_ATY=m -CONFIG_FB_ATY_CT=y -CONFIG_FB_ATY_GENERIC_LCD=y -CONFIG_FB_ATY_GX=y -CONFIG_FB_ATY_BACKLIGHT=y -CONFIG_FB_S3=m -CONFIG_FB_SAVAGE=m -CONFIG_FB_SAVAGE_I2C=y -CONFIG_FB_SAVAGE_ACCEL=y -CONFIG_FB_SIS=m -CONFIG_FB_SIS_300=y -CONFIG_FB_SIS_315=y -CONFIG_FB_VIA=m -CONFIG_FB_NEOMAGIC=m -CONFIG_FB_KYRO=m -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -CONFIG_FB_VOODOO1=m -CONFIG_FB_VT8623=m -CONFIG_FB_TRIDENT=m -# CONFIG_FB_TRIDENT_ACCEL is not set -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -CONFIG_FB_CARMINE=m -CONFIG_FB_CARMINE_DRAM_EVAL=y -# CONFIG_CARMINE_DRAM_CUSTOM is not set -CONFIG_FB_GEODE=y -CONFIG_FB_GEODE_LX=m -CONFIG_FB_GEODE_GX=m -CONFIG_FB_GEODE_GX1=m -CONFIG_FB_TMIO=m -CONFIG_FB_TMIO_ACCELL=y -# CONFIG_FB_VIRTUAL is not set -CONFIG_FB_METRONOME=m -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -# CONFIG_LCD_ILI9320 is not set -CONFIG_LCD_PLATFORM=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_PROGEAR=m -CONFIG_BACKLIGHT_CARILLO_RANCH=m -CONFIG_BACKLIGHT_MBP_NVIDIA=m -CONFIG_BACKLIGHT_SAHARA=m - -# -# Display device support -# -CONFIG_DISPLAY_SUPPORT=m - -# -# Display hardware drivers -# - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_JACK=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_VX_LIB=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_MTS64=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_SB_COMMON=m -CONFIG_SND_SB16_DSP=m -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS300=m -CONFIG_SND_ALS4000=m -CONFIG_SND_ALI5451=m -CONFIG_SND_ATIIXP=m -CONFIG_SND_ATIIXP_MODEM=m -CONFIG_SND_AU8810=m -CONFIG_SND_AU8820=m -CONFIG_SND_AU8830=m -CONFIG_SND_AW2=m -CONFIG_SND_AZT3328=m -CONFIG_SND_BT87X=m -# CONFIG_SND_BT87X_OVERCLOCK is not set -CONFIG_SND_CA0106=m -CONFIG_SND_CMIPCI=m -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -CONFIG_SND_CS4281=m -CONFIG_SND_CS46XX=m -CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS5530=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_EMU10K1=m -CONFIG_SND_EMU10K1X=m -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -CONFIG_SND_ES1938=m -CONFIG_SND_ES1968=m -CONFIG_SND_FM801=m -CONFIG_SND_FM801_TEA575X_BOOL=y -CONFIG_SND_FM801_TEA575X=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_HWDEP=y -# CONFIG_SND_HDA_RECONFIG is not set -# CONFIG_SND_HDA_INPUT_BEEP is not set -CONFIG_SND_HDA_CODEC_REALTEK=y -CONFIG_SND_HDA_CODEC_ANALOG=y -CONFIG_SND_HDA_CODEC_SIGMATEL=y -CONFIG_SND_HDA_CODEC_VIA=y -CONFIG_SND_HDA_CODEC_ATIHDMI=y -CONFIG_SND_HDA_CODEC_NVHDMI=y -CONFIG_SND_HDA_CODEC_INTELHDMI=y -CONFIG_SND_HDA_ELD=y -CONFIG_SND_HDA_CODEC_CONEXANT=y -CONFIG_SND_HDA_CODEC_CMEDIA=y -CONFIG_SND_HDA_CODEC_SI3054=y -CONFIG_SND_HDA_GENERIC=y -# CONFIG_SND_HDA_POWER_SAVE is not set -CONFIG_SND_HDSP=m -CONFIG_SND_HDSPM=m -CONFIG_SND_HIFIER=m -CONFIG_SND_ICE1712=m -CONFIG_SND_ICE1724=m -CONFIG_SND_INTEL8X0=m -CONFIG_SND_INTEL8X0M=m -CONFIG_SND_KORG1212=m -CONFIG_SND_MAESTRO3=m -CONFIG_SND_MIXART=m -CONFIG_SND_NM256=m -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -CONFIG_SND_RME32=m -CONFIG_SND_RME96=m -CONFIG_SND_RME9652=m -CONFIG_SND_SONICVIBES=m -CONFIG_SND_TRIDENT=m -CONFIG_SND_VIA82XX=m -CONFIG_SND_VIA82XX_MODEM=m -CONFIG_SND_VIRTUOSO=m -CONFIG_SND_VX222=m -CONFIG_SND_YMFPCI=m -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_USX2Y=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_US122L=m -CONFIG_SND_PCMCIA=y -CONFIG_SND_VXPOCKET=m -CONFIG_SND_PDAUDIOCF=m -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -CONFIG_HIDRAW=y - -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# Special HID drivers -# -# CONFIG_HID_COMPAT is not set -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_NTRIG=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_GREENASIA_FF=m -CONFIG_HID_TOPSEED=m -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -CONFIG_USB_MON=y -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_C67X00_HCD=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_OXU210HP_HCD=m -CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_ISP1760_HCD=m -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_SSB=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=m -CONFIG_USB_U132_HCD=m -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_STORAGE_ALAUDA=y -CONFIG_USB_STORAGE_ONETOUCH=y -CONFIG_USB_STORAGE_KARMA=y -CONFIG_USB_STORAGE_CYPRESS_ATACB=y -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m - -# -# USB port drivers -# -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=m -CONFIG_USB_EZUSB=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_FUNSOFT=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MOTOROLA=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_HP4X=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_SIEMENS_MPI=m -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_BERRY_CHARGE=m -CONFIG_USB_LED=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGET=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETMOTORCONTROL=m -CONFIG_USB_PHIDGETSERVO=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_VST=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -CONFIG_USB_OTG_UTILS=y -CONFIG_USB_GPIO_VBUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_WLP=m -CONFIG_UWB_I1480U=m -CONFIG_UWB_I1480U_WLP=m -CONFIG_MMC=m -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_BOUNCE=y -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=m -CONFIG_MMC_WBSD=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SDRICOH_CS=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m - -# -# LED drivers -# -CONFIG_LEDS_ALIX2=m -CONFIG_LEDS_PCA9532=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_CLEVO_MAIL=m -CONFIG_LEDS_PCA955X=m -CONFIG_LEDS_WM8350=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_IDE_DISK=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -CONFIG_ACCESSIBILITY=y -CONFIG_A11Y_BRAILLE_CONSOLE=y -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_MTHCA=m -CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_IPATH=m -CONFIG_INFINIBAND_AMSO1100=m -# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set -# CONFIG_INFINIBAND_CXGB3 is not set -CONFIG_MLX4_INFINIBAND=m -CONFIG_INFINIBAND_NES=m -# CONFIG_INFINIBAND_NES_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_CM is not set -CONFIG_INFINIBAND_IPOIB_DEBUG=y -# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_ISER=m -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=m -CONFIG_RTC_CLASS=m - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_TEST=m - -# -# I2C RTC drivers -# -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1374=m -CONFIG_RTC_DRV_DS1672=m -CONFIG_RTC_DRV_MAX6900=m -CONFIG_RTC_DRV_RS5C372=m -CONFIG_RTC_DRV_ISL1208=m -CONFIG_RTC_DRV_X1205=m -CONFIG_RTC_DRV_PCF8563=m -CONFIG_RTC_DRV_PCF8583=m -CONFIG_RTC_DRV_M41T80=m -CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_S35390A=m -CONFIG_RTC_DRV_FM3130=m -CONFIG_RTC_DRV_RX8581=m - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=m -CONFIG_RTC_DRV_DS1286=m -CONFIG_RTC_DRV_DS1511=m -CONFIG_RTC_DRV_DS1553=m -CONFIG_RTC_DRV_DS1742=m -CONFIG_RTC_DRV_STK17TA8=m -CONFIG_RTC_DRV_M48T86=m -CONFIG_RTC_DRV_M48T35=m -CONFIG_RTC_DRV_M48T59=m -CONFIG_RTC_DRV_BQ4802=m -CONFIG_RTC_DRV_V3020=m -CONFIG_RTC_DRV_WM8350=m -CONFIG_RTC_DRV_PCF50633=m - -# -# on-CPU RTC drivers -# -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_INTEL_IOATDMA=m -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -CONFIG_NET_DMA=y -CONFIG_DMATEST=m -CONFIG_DCA=m -CONFIG_AUXDISPLAY=y -# CONFIG_KS0108 is not set -CONFIG_UIO=m -CONFIG_UIO_CIF=m -CONFIG_UIO_PDRV=m -CONFIG_UIO_PDRV_GENIRQ=m -CONFIG_UIO_SMX=m -CONFIG_UIO_SERCOS3=m -CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set -# CONFIG_ET131X is not set -# CONFIG_SLICOSS is not set -# CONFIG_SXG is not set -# CONFIG_ME4000 is not set -# CONFIG_MEILHAUS is not set -# CONFIG_VIDEO_GO7007 is not set -# CONFIG_USB_IP_COMMON is not set -# CONFIG_W35UND is not set -# CONFIG_PRISM2_USB is not set -# CONFIG_ECHO is not set -# CONFIG_USB_ATMEL is not set -# CONFIG_POCH is not set -# CONFIG_AGNX is not set -# CONFIG_OTUS is not set -CONFIG_RT2860=m -CONFIG_RT2870=m -# CONFIG_COMEDI is not set -# CONFIG_ASUS_OLED is not set -# CONFIG_PANEL is not set -# CONFIG_ALTERA_PCIE_CHDMA is not set -CONFIG_RTL8187SE=m -# CONFIG_INPUT_MIMIO is not set -# CONFIG_TRANZPORT is not set - -# -# Android -# -# CONFIG_ANDROID is not set -# CONFIG_ANDROID_BINDER_IPC is not set -# CONFIG_ANDROID_LOGGER is not set -# CONFIG_ANDROID_RAM_CONSOLE is not set -# CONFIG_ANDROID_TIMED_GPIO is not set -# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set -CONFIG_X86_PLATFORM_DEVICES=y -CONFIG_ACER_WMI=m -CONFIG_ASUS_LAPTOP=m -CONFIG_FUJITSU_LAPTOP=m -# CONFIG_FUJITSU_LAPTOP_DEBUG is not set -CONFIG_HP_WMI=m -CONFIG_MSI_LAPTOP=m -CONFIG_PANASONIC_LAPTOP=m -CONFIG_COMPAL_LAPTOP=m -CONFIG_SONY_LAPTOP=m -CONFIG_SONYPI_COMPAT=y -CONFIG_THINKPAD_ACPI=m -# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set -# CONFIG_THINKPAD_ACPI_DEBUG is not set -CONFIG_THINKPAD_ACPI_BAY=y -CONFIG_THINKPAD_ACPI_VIDEO=y -CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y -CONFIG_INTEL_MENLOW=m -CONFIG_EEEPC_LAPTOP=m -CONFIG_ACPI_WMI=m -CONFIG_ACPI_ASUS=m -CONFIG_ACPI_TOSHIBA=m - -# -# Firmware Drivers -# -CONFIG_EDD=m -# CONFIG_EDD_OFF is not set -CONFIG_FIRMWARE_MEMMAP=y -CONFIG_DELL_RBU=m -CONFIG_DCDBAS=m -CONFIG_DMIID=y -CONFIG_ISCSI_IBFT_FIND=y -CONFIG_ISCSI_IBFT=m - -# -# File systems -# -CONFIG_EXT2_FS=m -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=m -# CONFIG_EXT4DEV_COMPAT is not set -CONFIG_EXT4_FS_XATTR=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_JBD2=m -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=m -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -# CONFIG_OCFS2_FS_STATS is not set -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_OCFS2_FS_POSIX_ACL=y -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_CONFIGFS_FS=m -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -# CONFIG_ECRYPT_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_UBIFS_FS=m -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_UBIFS_FS_DEBUG is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_ROMFS_FS=y -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_SPKM3=m -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_WEAK_PW_HASH=y -# CONFIG_CIFS_UPCALL is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_9P_FS=m - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -# CONFIG_MINIX_SUBPARTITION is not set -CONFIG_SOLARIS_X86_PARTITION=y -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_KARMA_PARTITION=y -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=0 -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_STACKTRACE=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -# CONFIG_FRAME_POINTER is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_LATENCYTOP is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_USER_STACKTRACE_SUPPORT=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_RING_BUFFER=y -CONFIG_TRACING=y - -# -# Tracers -# -CONFIG_SYSPROF_TRACER=y -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_STRICT_DEVMEM=y -CONFIG_X86_VERBOSE_BOOTUP=y -CONFIG_EARLY_PRINTK=y -# CONFIG_EARLY_PRINTK_DBGP is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -CONFIG_IO_DELAY_TYPE_0X80=0 -CONFIG_IO_DELAY_TYPE_0XED=1 -CONFIG_IO_DELAY_TYPE_UDELAY=2 -CONFIG_IO_DELAY_TYPE_NONE=3 -CONFIG_IO_DELAY_0X80=y -# CONFIG_IO_DELAY_0XED is not set -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_OPTIMIZE_INLINING is not set - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITY=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_NETWORK_XFRM=y -# CONFIG_SECURITY_PATH is not set -CONFIG_SECURITY_FILE_CAPABILITIES=y -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_XOR_BLOCKS=y -CONFIG_ASYNC_CORE=y -CONFIG_ASYNC_MEMCPY=y -CONFIG_ASYNC_XOR=y -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_FIPS=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_TEST=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_SEQIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_XTS=y - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=y - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32C_INTEL=m -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_TGR192=y -CONFIG_CRYPTO_WP512=y - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_AES_X86_64=y -CONFIG_CRYPTO_ANUBIS=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_CAMELLIA=y -CONFIG_CRYPTO_CAST5=y -CONFIG_CRYPTO_CAST6=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=y -CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SALSA20_X86_64=m -CONFIG_CRYPTO_SEED=y -CONFIG_CRYPTO_SERPENT=y -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_TWOFISH_X86_64=y - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_HIFN_795X=m -CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y -CONFIG_HAVE_KVM=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=m -CONFIG_KVM_INTEL=m -CONFIG_KVM_AMD=m -# CONFIG_KVM_TRACE is not set -CONFIG_VIRTIO=m -CONFIG_VIRTIO_RING=m -CONFIG_VIRTIO_PCI=m -CONFIG_VIRTIO_BALLOON=m - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -CONFIG_CRC_T10DIF=m -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -CONFIG_CRC7=m -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_CHECK_SIGNATURE=y diff --git a/testing/source/linux-2.6.30.5/config-generic-2.6.30.5 b/source/k/config-generic-2.6.33.4 index 95351f911..8877fca68 100644 --- a/testing/source/linux-2.6.30.5/config-generic-2.6.30.5 +++ b/source/k/config-generic-2.6.33.4 @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30.5 -# Sat Aug 22 19:26:41 2009 +# Linux kernel version: 2.6.33.4 +# Wed May 12 22:00:50 2010 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -16,7 +17,6 @@ CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y @@ -26,8 +26,8 @@ CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y @@ -35,7 +35,8 @@ CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -54,6 +55,7 @@ CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -66,9 +68,11 @@ CONFIG_LOCALVERSION="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_LZMA is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -76,17 +80,24 @@ CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 @@ -94,18 +105,19 @@ CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set +CONFIG_RELAY=y CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set +CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -113,8 +125,8 @@ CONFIG_ANON_INODES=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -128,6 +140,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -137,18 +158,28 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m # CONFIG_OPROFILE_IBS is not set +# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -169,27 +200,56 @@ CONFIG_BLOCK_COMPAT=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # Processor type and features # -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y # CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=y # CONFIG_X86_EXTENDED_PLATFORM is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST=y @@ -217,12 +277,13 @@ CONFIG_MEMTEST=y # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set +# CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=64 -CONFIG_X86_INTERNODE_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y @@ -242,11 +303,12 @@ CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set +# CONFIG_MAXSMP is not set CONFIG_NR_CPUS=32 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y @@ -255,6 +317,8 @@ CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y +CONFIG_X86_MCE_INJECT=m +CONFIG_X86_THERMAL_VECTOR=y CONFIG_I8K=m CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y @@ -262,13 +326,15 @@ CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=m CONFIG_X86_CPUID=m -CONFIG_X86_CPU_DEBUG=m CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set +CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_MEMORY_PROBE=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -278,47 +344,48 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y - -# -# Memory hotplug is currently incompatible with Software Suspend -# +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_MMU_NOTIFIER=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +# CONFIG_MEMORY_FAILURE is not set # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -# CONFIG_X86_PAT is not set -# CONFIG_EFI is not set +CONFIG_X86_PAT=y +CONFIG_ARCH_USES_PG_UNCACHED=y +CONFIG_EFI=y CONFIG_SECCOMP=y -CONFIG_CC_STACKPROTECTOR_ALL=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 +CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # # Power management and ACPI options @@ -330,12 +397,15 @@ CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION_NVS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="\"\"" +CONFIG_PM_RUNTIME=y CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_POWER_METER=m CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m @@ -346,6 +416,7 @@ CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 @@ -353,7 +424,9 @@ CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_PCI_SLOT=m CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=m -# CONFIG_ACPI_SBS is not set +CONFIG_ACPI_HOTPLUG_MEMORY=m +CONFIG_ACPI_SBS=m +CONFIG_SFI=y # # CPU Frequency scaling @@ -388,6 +461,7 @@ CONFIG_X86_P4_CLOCKMOD=m CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Memory power savings @@ -407,17 +481,20 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +CONFIG_PCIEAER_INJECT=m # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y -# CONFIG_PCI_STUB is not set +# CONFIG_PCI_DEBUG is not set +CONFIG_PCI_STUB=m CONFIG_HT_IRQ=y # CONFIG_PCI_IOV is not set +CONFIG_PCI_IOAPIC=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y @@ -451,11 +528,12 @@ CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=m +# CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options @@ -519,6 +597,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -605,6 +684,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_IP_VS=m # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set @@ -737,13 +817,21 @@ CONFIG_INET_DCCP_DIAG=m # # CONFIG_IP_DCCP_CCID2_DEBUG is not set # CONFIG_IP_DCCP_CCID3 is not set + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y -# CONFIG_RDS is not set +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -762,7 +850,7 @@ CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=y +CONFIG_LLC=m CONFIG_LLC2=m CONFIG_IPX=m # CONFIG_IPX_INTERN is not set @@ -776,6 +864,7 @@ CONFIG_IPDDP_DECAP=y # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m CONFIG_PHONET=m +CONFIG_IEEE802154=m CONFIG_NET_SCHED=y # @@ -812,7 +901,13 @@ CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m -# CONFIG_NET_EMATCH is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=m @@ -860,6 +955,17 @@ CONFIG_CAN_BCM=m # CAN Device Drivers # CONFIG_CAN_VCAN=m +CONFIG_CAN_DEV=m +# CONFIG_CAN_CALC_BITTIMING is not set +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_KVASER_PCI=m + +# +# CAN USB interfaces +# +CONFIG_CAN_EMS_USB=m # CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m @@ -945,15 +1051,27 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_DEBUG is not set CONFIG_RXKAD=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y +CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=m CONFIG_LIB80211_CRYPT_WEP=m @@ -961,10 +1079,6 @@ CONFIG_LIB80211_CRYPT_CCMP=m CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -976,8 +1090,8 @@ CONFIG_MAC80211_LEDS=y CONFIG_WIMAX=m CONFIG_WIMAX_DEBUG_LEVEL=8 CONFIG_RFKILL=m -CONFIG_RFKILL_INPUT=m CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y CONFIG_NET_9P=m CONFIG_NET_9P_VIRTIO=m CONFIG_NET_9P_RDMA=m @@ -991,18 +1105,22 @@ CONFIG_NET_9P_RDMA=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set +CONFIG_MTD_TESTS=m CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_TESTS=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -1071,10 +1189,9 @@ CONFIG_MTD_ESB2ROM=m CONFIG_MTD_CK804XROM=m CONFIG_MTD_SCB2_FLASH=m CONFIG_MTD_NETtel=m -CONFIG_MTD_DILNETPC=m -CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000 CONFIG_MTD_L440GX=m CONFIG_MTD_PCI=m +CONFIG_MTD_GPIO_ADDR=m CONFIG_MTD_INTEL_VR_NOR=m CONFIG_MTD_PLATRAM=m @@ -1119,6 +1236,7 @@ CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_ALAUDA=m CONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_GENERIC=m CONFIG_MTD_ONENAND_OTP=y CONFIG_MTD_ONENAND_2X_PROGRAM=y CONFIG_MTD_ONENAND_SIM=m @@ -1135,7 +1253,7 @@ CONFIG_MTD_QINFO_PROBE=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_GLUEBI=m # # UBI debugging options @@ -1197,7 +1315,10 @@ CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_SX8=m # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -1211,6 +1332,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_VIRTIO_BLK=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +CONFIG_AD525X_DPOT=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m CONFIG_SGI_IOC4=m @@ -1218,9 +1340,11 @@ CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m CONFIG_ENCLOSURE_SERVICES=m +CONFIG_CS5535_MFGPT=m +CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7 CONFIG_HP_ILO=m -CONFIG_DELL_LAPTOP=m CONFIG_ISL29003=m +CONFIG_DS1682=m # CONFIG_C2PORT is not set # @@ -1228,75 +1352,16 @@ CONFIG_ISL29003=m # CONFIG_EEPROM_AT24=m CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y +CONFIG_IWMC3200TOP=m +# CONFIG_IWMC3200TOP_DEBUG is not set +# CONFIG_IWMC3200TOP_DEBUGFS is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -CONFIG_IDE_XFER_MODE=y -CONFIG_IDE_TIMINGS=y -CONFIG_IDE_ATAPI=y -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -CONFIG_IDE_GD_ATAPI=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_DELKIN=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -CONFIG_BLK_DEV_PLATFORM=m -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -CONFIG_BLK_DEV_IDEPNP=y -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CS5520=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_JMICRON=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8172=y -CONFIG_BLK_DEV_IT8213=y -CONFIG_BLK_DEV_IT821X=y -# CONFIG_BLK_DEV_NS87415 is not set -CONFIG_BLK_DEV_PDC202XX_OLD=y -CONFIG_BLK_DEV_PDC202XX_NEW=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_BLK_DEV_TC86C001=y -CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDE is not set # # SCSI device support @@ -1319,10 +1384,6 @@ CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -1332,12 +1393,12 @@ CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # -CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_ISCSI_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set @@ -1346,8 +1407,12 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m CONFIG_BLK_DEV_3W_XXXX_RAID=m +CONFIG_SCSI_HPSA=m CONFIG_SCSI_3W_9XXX=m +CONFIG_SCSI_3W_SAS=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m @@ -1365,6 +1430,8 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set +CONFIG_SCSI_MVSAS=m +# CONFIG_SCSI_MVSAS_DEBUG is not set CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_ARCMSR=m @@ -1379,6 +1446,7 @@ CONFIG_SCSI_MPT2SAS_MAX_SGE=128 # CONFIG_SCSI_MPT2SAS_LOGGING is not set CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=m +CONFIG_VMWARE_PVSCSI=m CONFIG_LIBFC=m CONFIG_LIBFCOE=m CONFIG_FCOE=m @@ -1397,7 +1465,6 @@ CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_MVSAS=m CONFIG_SCSI_STEX=m CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -1415,7 +1482,10 @@ CONFIG_SCSI_LPFC=m CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_PMCRAID=m +CONFIG_SCSI_PM8001=m CONFIG_SCSI_SRP=m +CONFIG_SCSI_BFA_FC=m CONFIG_SCSI_LOWLEVEL_PCMCIA=y CONFIG_PCMCIA_FDOMAIN=m CONFIG_PCMCIA_QLOGIC=m @@ -1431,6 +1501,7 @@ CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y @@ -1451,47 +1522,50 @@ CONFIG_SATA_VIA=y CONFIG_SATA_VITESSE=y CONFIG_SATA_INIC162X=y CONFIG_PATA_ACPI=y -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CS5520=m -CONFIG_PATA_CS5530=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m +CONFIG_PATA_ALI=y +CONFIG_PATA_AMD=y +CONFIG_PATA_ARTOP=y +CONFIG_PATA_ATP867X=y +CONFIG_PATA_ATIIXP=y +CONFIG_PATA_CMD640_PCI=y +CONFIG_PATA_CMD64X=y +CONFIG_PATA_CS5520=y +CONFIG_PATA_CS5530=y +CONFIG_PATA_CYPRESS=y +CONFIG_PATA_EFAR=y CONFIG_ATA_GENERIC=y -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m +CONFIG_PATA_HPT366=y +CONFIG_PATA_HPT37X=y +CONFIG_PATA_HPT3X2N=y +CONFIG_PATA_HPT3X3=y CONFIG_PATA_HPT3X3_DMA=y -CONFIG_PATA_IT821X=m -CONFIG_PATA_IT8213=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_TRIFLEX=m -CONFIG_PATA_MARVELL=m -CONFIG_PATA_MPIIX=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_OPTIDMA=m +CONFIG_PATA_IT821X=y +CONFIG_PATA_IT8213=y +CONFIG_PATA_JMICRON=y +CONFIG_PATA_TRIFLEX=y +CONFIG_PATA_MARVELL=y +CONFIG_PATA_MPIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_NETCELL=y +CONFIG_PATA_NINJA32=y +CONFIG_PATA_NS87410=y +CONFIG_PATA_NS87415=y +CONFIG_PATA_OPTI=y +CONFIG_PATA_OPTIDMA=y CONFIG_PATA_PCMCIA=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RZ1000=m -CONFIG_PATA_SC1200=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_SIL680=m +CONFIG_PATA_PDC2027X=y +CONFIG_PATA_PDC_OLD=y +CONFIG_PATA_RADISYS=y +CONFIG_PATA_RDC=y +CONFIG_PATA_RZ1000=y +CONFIG_PATA_SC1200=y +CONFIG_PATA_SERVERWORKS=y +CONFIG_PATA_SIL680=y CONFIG_PATA_SIS=y -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m -CONFIG_PATA_SCH=m +CONFIG_PATA_TOSHIBA=m +CONFIG_PATA_VIA=y +CONFIG_PATA_WINBOND=y +CONFIG_PATA_SCH=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y @@ -1500,7 +1574,9 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y +# CONFIG_MULTICORE_RAID456 is not set CONFIG_MD_RAID6_PQ=y +CONFIG_ASYNC_RAID6_TEST=m CONFIG_MD_MULTIPATH=y CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -1508,10 +1584,13 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=y +CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m # CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set +CONFIG_DM_UEVENT=y CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m @@ -1526,7 +1605,11 @@ CONFIG_FUSION_LAN=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m @@ -1553,7 +1636,6 @@ CONFIG_I2O_PROC=m CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_IFB=m CONFIG_DUMMY=m CONFIG_BONDING=m @@ -1604,6 +1686,7 @@ CONFIG_ETHOC=m CONFIG_DNET=m CONFIG_NET_TULIP=y CONFIG_DE2104X=m +CONFIG_DE2104X_DSL=0 CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y @@ -1648,6 +1731,8 @@ CONFIG_SMSC9420=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m +CONFIG_KS8842=m +CONFIG_KS8851_MLL=m CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_SC92031=m @@ -1679,12 +1764,14 @@ CONFIG_SKY2=m CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m +CONFIG_CNIC=m CONFIG_QLA3XXX=m CONFIG_ATL1=m CONFIG_ATL1E=m CONFIG_ATL1C=m CONFIG_JME=m CONFIG_NETDEV_10000=y +CONFIG_MDIO=m CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3_DEPENDS=y @@ -1709,24 +1796,14 @@ CONFIG_QLGE=m CONFIG_SFC=m CONFIG_SFC_MTD=y CONFIG_BE2NET=m -CONFIG_TR=y +CONFIG_TR=m CONFIG_IBMOL=m CONFIG_3C359=m CONFIG_TMS380TR=m CONFIG_TMSPCI=m CONFIG_ABYSS=m - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y +CONFIG_WLAN=y CONFIG_PCMCIA_RAYCS=m -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_AIRO=m @@ -1741,19 +1818,47 @@ CONFIG_USB_ZD1201=m CONFIG_USB_NET_RNDIS_WLAN=m CONFIG_RTL8180=m CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y CONFIG_ADM8211=m # CONFIG_MAC80211_HWSIM is not set CONFIG_MWL8K=m -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -CONFIG_P54_LEDS=y +CONFIG_ATH_COMMON=m +# CONFIG_ATH_DEBUG is not set CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m CONFIG_ATH9K=m -# CONFIG_ATH9K_DEBUG is not set +# CONFIG_ATH9K_DEBUGFS is not set CONFIG_AR9170_USB=m CONFIG_AR9170_LEDS=y +CONFIG_B43=m +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +CONFIG_B43_PCMCIA=y +CONFIG_B43_SDIO=y +CONFIG_B43_PIO=y +CONFIG_B43_PHY_LP=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_HWRNG=y +# CONFIG_B43LEGACY_DEBUG is not set +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_CS=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y # CONFIG_IPW2100_DEBUG is not set @@ -1766,64 +1871,56 @@ CONFIG_IPW2200_QOS=y CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG is not set CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -# CONFIG_IWLWIFI_RFKILL is not set -# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set +CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y # CONFIG_IWLWIFI_DEBUG is not set +# CONFIG_IWLWIFI_DEVICE_TRACING is not set CONFIG_IWLAGN=m CONFIG_IWL4965=y CONFIG_IWL5000=y CONFIG_IWL3945=m CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_B43=m -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_PCMCIA=y -CONFIG_B43_PIO=y -CONFIG_B43_LEDS=y -CONFIG_B43_RFKILL=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_RFKILL=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_IWM=m +# CONFIG_IWM_DEBUG is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_CS=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_HERMES=m +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_NORTEL_HERMES=m +CONFIG_PCI_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_PCI=m +CONFIG_P54_LEDS=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m CONFIG_RT61PCI=m +CONFIG_RT2800PCI_PCI=m +CONFIG_RT2800PCI=m CONFIG_RT2500USB=m CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800_LIB=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_HT=y CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_RFKILL=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set -CONFIG_HERMES=m -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m +CONFIG_WL12XX=m +CONFIG_WL1251=m +CONFIG_WL1251_SDIO=m +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set # # WiMAX Wireless Broadband devices @@ -1831,6 +1928,7 @@ CONFIG_PCMCIA_SPECTRUM=m CONFIG_WIMAX_I2400M=m CONFIG_WIMAX_I2400M_USB=m CONFIG_WIMAX_I2400M_SDIO=m +# CONFIG_WIMAX_IWMC3200_SDIO is not set CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 # @@ -1860,6 +1958,8 @@ CONFIG_USB_ARMLINUX=y # CONFIG_USB_KC2190 is not set CONFIG_USB_NET_ZAURUS=m CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m @@ -1924,6 +2024,8 @@ CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_HE=m # CONFIG_ATM_HE_USE_SUNI is not set CONFIG_ATM_SOLOS=m +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKEHARD=m CONFIG_FDDI=y CONFIG_DEFXX=m # CONFIG_DEFXX_MMIO is not set @@ -1955,7 +2057,9 @@ CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y CONFIG_VIRTIO_NET=m +CONFIG_VMXNET3=m CONFIG_ISDN=y +CONFIG_ISDN_I4L=m CONFIG_MISDN=m CONFIG_MISDN_DSP=m CONFIG_MISDN_L1OIP=m @@ -1966,7 +2070,13 @@ CONFIG_MISDN_L1OIP=m CONFIG_MISDN_HFCPCI=m CONFIG_MISDN_HFCMULTI=m CONFIG_MISDN_HFCUSB=m -CONFIG_ISDN_I4L=m +CONFIG_MISDN_AVMFRITZ=m +CONFIG_MISDN_SPEEDFAX=m +CONFIG_MISDN_INFINEON=m +CONFIG_MISDN_W6692=m +CONFIG_MISDN_NETJET=m +CONFIG_MISDN_IPAC=m +CONFIG_MISDN_ISAR=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y @@ -2039,19 +2149,13 @@ CONFIG_HISAX_ST5481=m CONFIG_HISAX_HFCUSB=m CONFIG_HISAX_HFC4S8S=m CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_HYSDN=m CONFIG_HYSDN_CAPI=y -CONFIG_ISDN_DRV_GIGASET=m -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -# CONFIG_GIGASET_M101 is not set -# CONFIG_GIGASET_DEBUG is not set -# CONFIG_GIGASET_UNDOCREQ is not set +CONFIG_ISDN_HDLC=m CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_CAPI_TRACE=y @@ -2078,6 +2182,14 @@ CONFIG_ISDN_DIVAS_PRIPCI=y CONFIG_ISDN_DIVAS_DIVACAPI=m CONFIG_ISDN_DIVAS_USERIDI=m CONFIG_ISDN_DIVAS_MAINT=m +CONFIG_ISDN_DRV_GIGASET=m +# CONFIG_GIGASET_CAPI is not set +CONFIG_GIGASET_I4L=y +# CONFIG_GIGASET_DUMMYLL is not set +CONFIG_GIGASET_BASE=m +CONFIG_GIGASET_M105=m +# CONFIG_GIGASET_M101 is not set +# CONFIG_GIGASET_DEBUG is not set CONFIG_PHONE=m CONFIG_PHONE_IXJ=m CONFIG_PHONE_IXJ_PCMCIA=m @@ -2088,6 +2200,7 @@ CONFIG_PHONE_IXJ_PCMCIA=m CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m # # Userland interfaces @@ -2104,13 +2217,19 @@ CONFIG_INPUT_EVDEV=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5588=m CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_QT2160=m # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=m +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_MAX7359=m # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_GPIO=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y @@ -2119,12 +2238,14 @@ CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m CONFIG_MOUSE_VSXXXAA=m CONFIG_MOUSE_GPIO=m +CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m @@ -2154,14 +2275,23 @@ CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y -# CONFIG_INPUT_TABLET is not set +# CONFIG_JOYSTICK_WALKERA0701 is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_AD7879_I2C=m CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_EETI=m CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_MCS5000=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_MK712=m @@ -2185,6 +2315,10 @@ CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y @@ -2198,6 +2332,7 @@ CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_WINBOND_CIR=m CONFIG_INPUT_PCF50633_PMU=m CONFIG_INPUT_GPIO_ROTARY_ENCODER=m @@ -2212,6 +2347,7 @@ CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m @@ -2242,9 +2378,6 @@ CONFIG_SYNCLINK_GT=m CONFIG_N_HDLC=m CONFIG_RISCOM8=m CONFIG_SPECIALIX=m -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set CONFIG_STALDRV=y CONFIG_STALLION=m CONFIG_ISTALLION=m @@ -2276,7 +2409,7 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m @@ -2292,6 +2425,7 @@ CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_NVRAM=m CONFIG_R3964=m @@ -2307,8 +2441,10 @@ CONFIG_IPWIRELESS=m CONFIG_MWAVE=m CONFIG_PC8736x_GPIO=m CONFIG_NSC_GPIO=m -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set +CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 +CONFIG_HPET=y +CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=m # CONFIG_TCG_TIS is not set @@ -2319,6 +2455,7 @@ CONFIG_TELCLOCK=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m @@ -2349,6 +2486,11 @@ CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # +# ACPI drivers +# +CONFIG_I2C_SCMI=m + +# # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_GPIO=m @@ -2364,11 +2506,6 @@ CONFIG_I2C_TAOS_EVM=m CONFIG_I2C_TINY_USB=m # -# Graphics adapter I2C/DDC channel drivers -# -CONFIG_I2C_VOODOO3=m - -# # Other I2C/SMBus bus drivers # CONFIG_I2C_PCA_PLATFORM=m @@ -2377,16 +2514,21 @@ CONFIG_I2C_STUB=m # # Miscellaneous I2C Chip support # -CONFIG_DS1682=m -CONFIG_SENSORS_MAX6875=m CONFIG_SENSORS_TSL2550=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +CONFIG_PPS=m +# CONFIG_PPS_DEBUG is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y # @@ -2399,14 +2541,22 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_ADP5588=m # # PCI GPIO expanders: # +CONFIG_GPIO_CS5535=m +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# +# CONFIG_GPIO_UCB1400 is not set CONFIG_W1=m CONFIG_W1_CON=y @@ -2433,10 +2583,17 @@ CONFIG_POWER_SUPPLY=y CONFIG_PDA_POWER=m CONFIG_WM8350_POWER=m CONFIG_BATTERY_DS2760=m +CONFIG_BATTERY_DS2782=m CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_MAX17040=m CONFIG_CHARGER_PCF50633=m CONFIG_HWMON=m CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_ABITUGURU=m CONFIG_SENSORS_ABITUGURU3=m CONFIG_SENSORS_AD7414=m @@ -2452,16 +2609,14 @@ CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7473=m CONFIG_SENSORS_ADT7475=m CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_K10TEMP=m CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_ATK0110=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_FSCHER=m -CONFIG_SENSORS_FSCPOS=m CONFIG_SENSORS_FSCHMD=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_GL518SM=m @@ -2471,6 +2626,7 @@ CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m @@ -2496,7 +2652,11 @@ CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_AMC6821=m CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m @@ -2508,10 +2668,16 @@ CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_WM8350=m CONFIG_SENSORS_HDAPS=m -CONFIG_SENSORS_LIS3LV02D=m +CONFIG_SENSORS_LIS3_I2C=m CONFIG_SENSORS_APPLESMC=m -# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# ACPI drivers +# +CONFIG_SENSORS_ATK0110=m +CONFIG_SENSORS_LIS3LV02D=m CONFIG_THERMAL=m CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y @@ -2526,7 +2692,9 @@ CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m +CONFIG_GEODE_WDT=m CONFIG_SC520_WDT=m +CONFIG_SBC_FITPC2_WATCHDOG=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m CONFIG_IBMASR=m @@ -2557,7 +2725,6 @@ CONFIG_SBC_EPX_C3_WATCHDOG=m # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m -CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards @@ -2576,6 +2743,8 @@ CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y CONFIG_SSB_PCMCIAHOST=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y @@ -2595,11 +2764,10 @@ CONFIG_MFD_WM8350_I2C=m CONFIG_MFD_PCF50633=m CONFIG_PCF50633_ADC=m CONFIG_PCF50633_GPIO=m +CONFIG_AB3100_CORE=m +CONFIG_AB3100_OTP=m # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# +CONFIG_MEDIA_SUPPORT=m # # Multimedia core support @@ -2616,6 +2784,8 @@ CONFIG_VIDEO_MEDIA=m # CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m +CONFIG_IR_CORE=m +CONFIG_VIDEO_IR=m CONFIG_MEDIA_ATTACH=y CONFIG_MEDIA_TUNER=m # CONFIG_MEDIA_TUNER_CUSTOMISE is not set @@ -2636,6 +2806,7 @@ CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEOBUF_GEN=m @@ -2643,7 +2814,6 @@ CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y @@ -2682,11 +2852,13 @@ CONFIG_VIDEO_SAA6588=m # # Video decoders # +CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_BT819=m CONFIG_VIDEO_BT856=m CONFIG_VIDEO_BT866=m CONFIG_VIDEO_KS0127=m CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_MT9V011=m CONFIG_VIDEO_TCM825X=m CONFIG_VIDEO_SAA7110=m CONFIG_VIDEO_SAA711X=m @@ -2713,6 +2885,8 @@ CONFIG_VIDEO_SAA7127=m CONFIG_VIDEO_SAA7185=m CONFIG_VIDEO_ADV7170=m CONFIG_VIDEO_ADV7175=m +CONFIG_VIDEO_THS7303=m +CONFIG_VIDEO_ADV7343=m # # Video improvement chips @@ -2758,30 +2932,39 @@ CONFIG_VIDEO_AU0828=m CONFIG_VIDEO_IVTV=m CONFIG_VIDEO_FB_IVTV=m CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_SAA7164=m CONFIG_VIDEO_CAFE_CCIC=m CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_MT9M001=m CONFIG_SOC_CAMERA_MT9M111=m CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9T112=m CONFIG_SOC_CAMERA_MT9V022=m +CONFIG_SOC_CAMERA_RJ54N1=m CONFIG_SOC_CAMERA_TW9910=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_SOC_CAMERA_OV772X=m +CONFIG_SOC_CAMERA_OV9640=m CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_USB_M5602=m CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m CONFIG_USB_GSPCA_CONEX=m CONFIG_USB_GSPCA_ETOMS=m CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m CONFIG_USB_GSPCA_MARS=m CONFIG_USB_GSPCA_MR97310A=m CONFIG_USB_GSPCA_OV519=m CONFIG_USB_GSPCA_OV534=m CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SN9C20X_EVDEV=y CONFIG_USB_GSPCA_SONIXB=m CONFIG_USB_GSPCA_SONIXJ=m CONFIG_USB_GSPCA_SPCA500=m @@ -2793,6 +2976,7 @@ CONFIG_USB_GSPCA_SPCA561=m CONFIG_USB_GSPCA_SQ905=m CONFIG_USB_GSPCA_SQ905C=m CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STV0680=m CONFIG_USB_GSPCA_SUNPLUS=m CONFIG_USB_GSPCA_T613=m CONFIG_USB_GSPCA_TV8532=m @@ -2833,10 +3017,14 @@ CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_MAESTRO=m +CONFIG_I2C_SI4713=m +CONFIG_RADIO_SI4713=m CONFIG_USB_DSBR=m -CONFIG_USB_SI470X=m +# CONFIG_RADIO_SI470X is not set CONFIG_USB_MR800=m CONFIG_RADIO_TEA5764=m +CONFIG_RADIO_TEF6862=m +CONFIG_DVB_MAX_ADAPTERS=8 # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -2883,10 +3071,17 @@ CONFIG_DVB_USB_ANYSEE=m CONFIG_DVB_USB_DTV5100=m CONFIG_DVB_USB_AF9015=m CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_EC168=m CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_SIANO_SMS1XXX=m -CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y +CONFIG_SMS_SIANO_MDTV=m + +# +# Siano module components +# +CONFIG_SMS_USB_DRV=m +CONFIG_SMS_SDIO_DRV=m # # Supported FlexCopII (B2C2) Adapters @@ -2915,10 +3110,23 @@ CONFIG_DVB_DM1105=m # Supported FireWire (IEEE 1394) Adapters # CONFIG_DVB_FIREDTV=m +# CONFIG_DVB_FIREDTV_FIREWIRE is not set CONFIG_DVB_FIREDTV_IEEE1394=y CONFIG_DVB_FIREDTV_INPUT=y # +# Supported Earthsoft PT1 Adapters +# +CONFIG_DVB_PT1=m + +# +# Supported Mantis Adapters +# +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m + +# # Supported DVB Frontends # CONFIG_DVB_FE_CUSTOMISE=y @@ -2932,6 +3140,8 @@ CONFIG_DVB_FE_CUSTOMISE=y # CONFIG_DVB_STB0899=m CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m # # DVB-S (satellite) frontends @@ -2940,6 +3150,7 @@ CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_MT312=m CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m CONFIG_DVB_S5H1420=m CONFIG_DVB_STV0288=m CONFIG_DVB_STB6000=m @@ -2956,6 +3167,8 @@ CONFIG_DVB_TDA826X=m CONFIG_DVB_TUA6100=m CONFIG_DVB_CX24116=m CONFIG_DVB_SI21XX=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m # # DVB-T (terrestrial) frontends @@ -2976,6 +3189,7 @@ CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m CONFIG_DVB_TDA10048=m CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m # # DVB-C (cable) frontends @@ -3003,12 +3217,14 @@ CONFIG_DVB_S5H1411=m # ISDB-T (terrestrial) frontends # CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m # # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=m CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m # # SEC control devices for DVB-S @@ -3016,8 +3232,11 @@ CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m CONFIG_DVB_LGS8GL5=m CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m # # Tools to develop new frontends @@ -3029,19 +3248,23 @@ CONFIG_USB_DABUSB=m # # Graphics support # -CONFIG_AGP=y -CONFIG_AGP_AMD64=y +CONFIG_AGP=m +CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m CONFIG_AGP_SIS=m CONFIG_AGP_VIA=m +CONFIG_VGA_ARB=y CONFIG_DRM=m +CONFIG_DRM_KMS_HELPER=m +CONFIG_DRM_TTM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m +# CONFIG_DRM_RADEON_KMS is not set CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_I915=m -# CONFIG_DRM_I915_KMS is not set +CONFIG_DRM_I915_KMS=y CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m @@ -3082,6 +3305,7 @@ CONFIG_FB_ARC=m CONFIG_FB_VGA16=m # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y +# CONFIG_FB_EFI is not set CONFIG_FB_N411=m CONFIG_FB_HGA=m # CONFIG_FB_HGA_ACCEL is not set @@ -3096,16 +3320,12 @@ CONFIG_FB_RIVA_I2C=y CONFIG_FB_RIVA_BACKLIGHT=y CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m -CONFIG_FB_INTEL=m -# CONFIG_FB_INTEL_DEBUG is not set -CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_MATROX_MULTIHEAD=y CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y @@ -3196,6 +3416,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -3209,17 +3430,26 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +CONFIG_SND_DMA_SGBUF=y +CONFIG_SND_RAWMIDI_SEQ=m +CONFIG_SND_OPL3_LIB_SEQ=m +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y +# CONFIG_SND_PCSP is not set CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m @@ -3253,6 +3483,8 @@ CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS5530=m +CONFIG_SND_CS5535AUDIO=m +CONFIG_SND_CTXFI=m CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m @@ -3278,8 +3510,10 @@ CONFIG_SND_FM801_TEA575X_BOOL=y CONFIG_SND_FM801_TEA575X=m CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y -# CONFIG_SND_HDA_RECONFIG is not set +CONFIG_SND_HDA_RECONFIG=y # CONFIG_SND_HDA_INPUT_BEEP is not set +CONFIG_SND_HDA_INPUT_JACK=y +CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y @@ -3288,7 +3522,9 @@ CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y +CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y @@ -3301,6 +3537,7 @@ CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m +CONFIG_SND_LX6464ES=m CONFIG_SND_MAESTRO3=m CONFIG_SND_MIXART=m CONFIG_SND_NM256=m @@ -3330,7 +3567,6 @@ CONFIG_SND_PDAUDIOCF=m CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=m -# CONFIG_HID_DEBUG is not set CONFIG_HIDRAW=y # @@ -3349,10 +3585,12 @@ CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m -CONFIG_DRAGONRISE_FF=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y CONFIG_HID_EZKEY=m CONFIG_HID_KYE=m CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m CONFIG_HID_LOGITECH=m CONFIG_LOGITECH_FF=y @@ -3366,10 +3604,16 @@ CONFIG_HID_PETALYNX=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m -CONFIG_GREENASIA_FF=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y CONFIG_HID_TOPSEED=m -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -3384,7 +3628,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y CONFIG_USB_WUSB=m @@ -3395,12 +3639,15 @@ CONFIG_USB_WUSB_CBAF=m # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=m +CONFIG_USB_XHCI_HCD=m +# CONFIG_USB_XHCI_HCD_DEBUGGING is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OXU210HP_HCD=m CONFIG_USB_ISP116X_HCD=m CONFIG_USB_ISP1760_HCD=m +CONFIG_USB_ISP1362_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_SSB=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -3565,9 +3812,14 @@ CONFIG_SDIO_UART=m CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=m +CONFIG_MMC_SDHCI_PLTFM=m CONFIG_MMC_WBSD=m +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -3592,18 +3844,19 @@ CONFIG_LEDS_ALIX2=m CONFIG_LEDS_PCA9532=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_GPIO_PLATFORM=y -CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP3944=m CONFIG_LEDS_CLEVO_MAIL=m CONFIG_LEDS_PCA955X=m CONFIG_LEDS_WM8350=m CONFIG_LEDS_BD2802=m +CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_LT3593=m # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_GPIO=m @@ -3621,7 +3874,7 @@ CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_IPATH=m +# CONFIG_INFINIBAND_IPATH is not set CONFIG_INFINIBAND_AMSO1100=m # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set # CONFIG_INFINIBAND_CXGB3 is not set @@ -3634,7 +3887,14 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_ISER=m -# CONFIG_EDAC is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_DECODE_MCE=y +# CONFIG_EDAC_MM_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m @@ -3661,9 +3921,11 @@ CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_FM3130=m CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m # # SPI RTC drivers @@ -3681,19 +3943,24 @@ CONFIG_RTC_DRV_STK17TA8=m CONFIG_RTC_DRV_M48T86=m CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m CONFIG_RTC_DRV_V3020=m CONFIG_RTC_DRV_WM8350=m CONFIG_RTC_DRV_PCF50633=m +CONFIG_RTC_DRV_AB3100=m # # on-CPU RTC drivers # +CONFIG_CS5535_CLOCK_EVENT_SRC=m CONFIG_DMADEVICES=y # # DMA Devices # +CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y CONFIG_INTEL_IOATDMA=m CONFIG_DMA_ENGINE=y @@ -3713,57 +3980,89 @@ CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_SMX=m CONFIG_UIO_AEC=m CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m + +# +# TI VLYNQ +# CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_ET131X is not set # CONFIG_SLICOSS is not set -# CONFIG_SXG is not set -# CONFIG_ME4000 is not set -# CONFIG_MEILHAUS is not set # CONFIG_VIDEO_GO7007 is not set +CONFIG_VIDEO_CX25821=m +CONFIG_VIDEO_CX25821_ALSA=m # CONFIG_USB_IP_COMMON is not set # CONFIG_W35UND is not set # CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set -# CONFIG_USB_ATMEL is not set # CONFIG_POCH is not set -# CONFIG_AGNX is not set # CONFIG_OTUS is not set CONFIG_RT2860=m CONFIG_RT2870=m -CONFIG_RT3070=m # CONFIG_COMEDI is not set # CONFIG_ASUS_OLED is not set # CONFIG_PANEL is not set # CONFIG_ALTERA_PCIE_CHDMA is not set -CONFIG_RTL8187SE=m -# CONFIG_INPUT_MIMIO is not set +CONFIG_R8187SE=m +CONFIG_RTL8192SU=m +CONFIG_RTL8192U=m +CONFIG_RTL8192E=m # CONFIG_TRANZPORT is not set # -# Android +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection # -# CONFIG_ANDROID is not set -# CONFIG_ANDROID_BINDER_IPC is not set -# CONFIG_ANDROID_LOGGER is not set -# CONFIG_ANDROID_RAM_CONSOLE is not set -# CONFIG_ANDROID_TIMED_GPIO is not set -# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set -CONFIG_DST=m -# CONFIG_DST_DEBUG is not set +CONFIG_INPUT_GPIO=m CONFIG_POHMELFS=m # CONFIG_POHMELFS_DEBUG is not set -# CONFIG_POHMELFS_CRYPTO is not set -CONFIG_USB_SERIAL_ATEN2011=m +CONFIG_POHMELFS_CRYPTO=y CONFIG_B3DFG=m CONFIG_IDE_PHISON=m CONFIG_PLAN9AUTH=m -CONFIG_HECI=m CONFIG_LINE6_USB=m -CONFIG_USB_SERIAL_QUATECH_ESU100=m +CONFIG_DRM_VMWGFX=m +CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +CONFIG_DRM_NOUVEAU_DEBUG=y + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_USB_SERIAL_QUATECH2=m +CONFIG_USB_SERIAL_QUATECH_USB2=m +CONFIG_VT6655=m +CONFIG_VT6656=m +CONFIG_FB_UDL=m +# CONFIG_HYPERV is not set +# CONFIG_VME_BUS is not set + +# +# RAR Register Driver +# +CONFIG_RAR_REGISTER=m +# CONFIG_DX_SEP is not set +# CONFIG_IIO is not set +CONFIG_RAMZSWAP=m +CONFIG_RAMZSWAP_STATS=y +CONFIG_BATMAN_ADV=m +# CONFIG_BATMAN_DEBUG is not set +CONFIG_SAMSUNG_LAPTOP=m +CONFIG_STRIP=m +CONFIG_PCMCIA_WAVELAN=m +CONFIG_PCMCIA_NETWAVE=m +CONFIG_FB_SM7XX=m +# CONFIG_FB_SM7XX_ACCEL is not set CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m +CONFIG_ACERHDF=m CONFIG_ASUS_LAPTOP=m +CONFIG_DELL_LAPTOP=m CONFIG_DELL_WMI=m CONFIG_FUJITSU_LAPTOP=m # CONFIG_FUJITSU_LAPTOP_DEBUG is not set @@ -3774,6 +4073,7 @@ CONFIG_COMPAL_LAPTOP=m CONFIG_SONY_LAPTOP=m CONFIG_SONYPI_COMPAT=y CONFIG_THINKPAD_ACPI=m +CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set # CONFIG_THINKPAD_ACPI_DEBUG is not set # CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set @@ -3782,15 +4082,20 @@ CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y CONFIG_INTEL_MENLOW=m CONFIG_EEEPC_LAPTOP=m CONFIG_ACPI_WMI=m +CONFIG_MSI_WMI=m CONFIG_ACPI_ASUS=m +CONFIG_TOPSTAR_LAPTOP=m CONFIG_ACPI_TOSHIBA=m +CONFIG_TOSHIBA_BT_RFKILL=m +CONFIG_ACPI_CMPC=m # # Firmware Drivers # CONFIG_EDD=m -# CONFIG_EDD_OFF is not set +CONFIG_EDD_OFF=y CONFIG_FIRMWARE_MEMMAP=y +CONFIG_EFI_VARS=m CONFIG_DELL_RBU=m CONFIG_DCDBAS=m CONFIG_DMIID=y @@ -3801,18 +4106,20 @@ CONFIG_ISCSI_IBFT=m # File systems # CONFIG_EXT2_FS=m -# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=m -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m @@ -3836,17 +4143,18 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m -# CONFIG_GFS2_FS_LOCKING_DLM is not set +CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_OCFS2_FS_POSIX_ACL=y CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -3860,6 +4168,7 @@ CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # @@ -3869,6 +4178,7 @@ CONFIG_FSCACHE=m # CONFIG_FSCACHE_STATS is not set # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set @@ -3906,7 +4216,7 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_CONFIGFS_FS=m +CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set @@ -3955,25 +4265,24 @@ CONFIG_UFS_FS=m # CONFIG_UFS_DEBUG is not set CONFIG_EXOFS_FS=m # CONFIG_EXOFS_DEBUG is not set -CONFIG_NILFS2_FS=m CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_FSCACHE is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set @@ -3999,27 +4308,28 @@ CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set # CONFIG_AFS_FSCACHE is not set CONFIG_9P_FS=m +# CONFIG_9P_FSCACHE is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y -# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y -# CONFIG_UNIXWARE_DISKLABEL is not set +CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set +CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set +CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y -# CONFIG_EFI_PARTITION is not set +CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" @@ -4073,60 +4383,118 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=0 CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_VIRTUAL is not set +# CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y -# CONFIG_FRAME_POINTER is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE_NMI_ENTER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y +CONFIG_FTRACE_NMI_ENTER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y # CONFIG_IRQSOFF_TRACER is not set CONFIG_SYSPROF_TRACER=y # CONFIG_SCHED_TRACER is not set -CONFIG_CONTEXT_SWITCH_TRACER=y -# CONFIG_EVENT_TRACER is not set # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_POWER_TRACER is not set +# CONFIG_KSYM_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_DYNAMIC_FTRACE=y +# CONFIG_FUNCTION_PROFILER is not set +CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set +CONFIG_RING_BUFFER_BENCHMARK=m # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +CONFIG_DEBUG_RODATA_TEST=y +# CONFIG_DEBUG_NX_TEST is not set +# CONFIG_IOMMU_DEBUG is not set +# CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 @@ -4137,7 +4505,10 @@ CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_OPTIMIZE_INLINING is not set +# CONFIG_DEBUG_BOOT_PARAMS is not set +# CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options @@ -4149,14 +4520,22 @@ CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set -CONFIG_SECURITY_FILE_CAPABILITIES=y -# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_SELINUX is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_IMA is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y +CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y +CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y # @@ -4200,18 +4579,21 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XTS=y +CONFIG_CRYPTO_FPU=y # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=m +CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y @@ -4224,6 +4606,7 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y +CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # # Ciphers @@ -4253,7 +4636,7 @@ CONFIG_CRYPTO_TWOFISH_X86_64=y # Compression # CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_ZLIB=y +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -4261,15 +4644,19 @@ CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_PADLOCK=m +CONFIG_CRYPTO_DEV_PADLOCK_AES=m +CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m -# CONFIG_KVM_TRACE is not set CONFIG_VIRTIO=m CONFIG_VIRTIO_RING=m CONFIG_VIRTIO_PCI=m @@ -4284,19 +4671,20 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_CRC16=y CONFIG_CRC_T10DIF=m -CONFIG_CRC_ITU_T=m +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=m CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_DEC16=y CONFIG_TEXTSEARCH=y @@ -4308,3 +4696,4 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_NLATTR=y +CONFIG_LRU_CACHE=m diff --git a/source/k/config-huge-2.6.29.6 b/source/k/config-huge-2.6.33.4 index 452900eac..1b2d932e5 100644 --- a/source/k/config-huge-2.6.29.6 +++ b/source/k/config-huge-2.6.33.4 @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29.6 -# Mon Aug 17 11:55:29 2009 +# Linux kernel version: 2.6.33.4 +# Wed May 12 23:07:13 2010 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -16,7 +17,6 @@ CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y @@ -26,8 +26,8 @@ CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y @@ -35,6 +35,8 @@ CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -42,17 +44,18 @@ CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -62,23 +65,39 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 @@ -86,15 +105,19 @@ CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set +CONFIG_RELAY=y CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set +CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -102,6 +125,7 @@ CONFIG_ANON_INODES=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -116,6 +140,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -125,16 +158,28 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m # CONFIG_OPROFILE_IBS is not set +# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,7 +192,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -156,32 +200,56 @@ CONFIG_BLOCK_COMPAT=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # Processor type and features # -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y # CONFIG_SPARSE_IRQ is not set -CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y -CONFIG_X86_PC=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_VSMP is not set +# CONFIG_X86_EXTENDED_PLATFORM is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST=y @@ -209,12 +277,13 @@ CONFIG_MEMTEST=y # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set +# CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y @@ -223,7 +292,7 @@ CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR_64=y +CONFIG_CPU_SUP_CENTAUR=y # CONFIG_X86_DS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y @@ -234,11 +303,12 @@ CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set +# CONFIG_MAXSMP is not set CONFIG_NR_CPUS=32 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y @@ -246,6 +316,9 @@ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y +CONFIG_X86_MCE_INJECT=m +CONFIG_X86_THERMAL_VECTOR=y CONFIG_I8K=m CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y @@ -256,9 +329,12 @@ CONFIG_X86_CPUID=m CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set +CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_MEMORY_PROBE=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -268,42 +344,48 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y - -# -# Memory hotplug is currently incompatible with Software Suspend -# +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_MMU_NOTIFIER=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +# CONFIG_MEMORY_FAILURE is not set # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -# CONFIG_X86_PAT is not set -# CONFIG_EFI is not set +CONFIG_X86_PAT=y +CONFIG_ARCH_USES_PG_UNCACHED=y +CONFIG_EFI=y CONFIG_SECCOMP=y +CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 +CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # # Power management and ACPI options @@ -315,12 +397,15 @@ CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION_NVS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="\"\"" +CONFIG_PM_RUNTIME=y CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_POWER_METER=m CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m @@ -331,6 +416,7 @@ CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 @@ -338,7 +424,9 @@ CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_PCI_SLOT=m CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=m -# CONFIG_ACPI_SBS is not set +CONFIG_ACPI_HOTPLUG_MEMORY=m +CONFIG_ACPI_SBS=m +CONFIG_SFI=y # # CPU Frequency scaling @@ -364,7 +452,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_POWERNOW_K8=m -CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=m CONFIG_X86_P4_CLOCKMOD=m @@ -374,6 +461,7 @@ CONFIG_X86_P4_CLOCKMOD=m CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Memory power savings @@ -393,16 +481,20 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +CONFIG_PCIEAER_INJECT=m # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y -# CONFIG_PCI_STUB is not set +# CONFIG_PCI_DEBUG is not set +CONFIG_PCI_STUB=m CONFIG_HT_IRQ=y +# CONFIG_PCI_IOV is not set +CONFIG_PCI_IOAPIC=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y @@ -436,16 +528,16 @@ CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=m +# CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -483,7 +575,7 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_LRO=m +CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set @@ -505,6 +597,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -545,6 +638,8 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -554,6 +649,7 @@ CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -564,6 +660,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -587,6 +684,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_IP_VS=m # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set @@ -677,11 +775,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m @@ -719,12 +817,21 @@ CONFIG_INET_DCCP_DIAG=m # # CONFIG_IP_DCCP_CCID2_DEBUG is not set # CONFIG_IP_DCCP_CCID3 is not set + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -743,7 +850,7 @@ CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=y +CONFIG_LLC=m CONFIG_LLC2=m CONFIG_IPX=m # CONFIG_IPX_INTERN is not set @@ -756,6 +863,8 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +CONFIG_PHONET=m +CONFIG_IEEE802154=m CONFIG_NET_SCHED=y # @@ -792,7 +901,13 @@ CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m -# CONFIG_NET_EMATCH is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=m @@ -811,6 +926,7 @@ CONFIG_NET_SCH_FIFO=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set CONFIG_HAMRADIO=y # @@ -839,6 +955,17 @@ CONFIG_CAN_BCM=m # CAN Device Drivers # CONFIG_CAN_VCAN=m +CONFIG_CAN_DEV=m +# CONFIG_CAN_CALC_BITTIMING is not set +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_KVASER_PCI=m + +# +# CAN USB interfaces +# +CONFIG_CAN_EMS_USB=m # CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m @@ -924,17 +1051,27 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_DEBUG is not set CONFIG_RXKAD=m -CONFIG_PHONET=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y +CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=m CONFIG_LIB80211_CRYPT_WEP=m @@ -942,10 +1079,6 @@ CONFIG_LIB80211_CRYPT_CCMP=m CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -957,8 +1090,8 @@ CONFIG_MAC80211_LEDS=y CONFIG_WIMAX=m CONFIG_WIMAX_DEBUG_LEVEL=8 CONFIG_RFKILL=m -CONFIG_RFKILL_INPUT=m CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y CONFIG_NET_9P=m CONFIG_NET_9P_VIRTIO=m CONFIG_NET_9P_RDMA=m @@ -972,18 +1105,22 @@ CONFIG_NET_9P_RDMA=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set +CONFIG_MTD_TESTS=m CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_TESTS=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -1052,10 +1189,9 @@ CONFIG_MTD_ESB2ROM=m CONFIG_MTD_CK804XROM=m CONFIG_MTD_SCB2_FLASH=m CONFIG_MTD_NETtel=m -CONFIG_MTD_DILNETPC=m -CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000 CONFIG_MTD_L440GX=m CONFIG_MTD_PCI=m +CONFIG_MTD_GPIO_ADDR=m CONFIG_MTD_INTEL_VR_NOR=m CONFIG_MTD_PLATRAM=m @@ -1100,6 +1236,7 @@ CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_ALAUDA=m CONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_GENERIC=m CONFIG_MTD_ONENAND_OTP=y CONFIG_MTD_ONENAND_2X_PROGRAM=y CONFIG_MTD_ONENAND_SIM=m @@ -1116,7 +1253,7 @@ CONFIG_MTD_QINFO_PROBE=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_GLUEBI=m # # UBI debugging options @@ -1178,7 +1315,10 @@ CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_SX8=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -1192,6 +1332,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_VIRTIO_BLK=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +CONFIG_AD525X_DPOT=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m CONFIG_SGI_IOC4=m @@ -1199,11 +1340,11 @@ CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m CONFIG_ENCLOSURE_SERVICES=m -CONFIG_SGI_XP=m +CONFIG_CS5535_MFGPT=m +CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7 CONFIG_HP_ILO=m -CONFIG_SGI_GRU=m -# CONFIG_SGI_GRU_DEBUG is not set -CONFIG_DELL_LAPTOP=m +CONFIG_ISL29003=m +CONFIG_DS1682=m # CONFIG_C2PORT is not set # @@ -1211,74 +1352,16 @@ CONFIG_DELL_LAPTOP=m # CONFIG_EEPROM_AT24=m CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y +CONFIG_IWMC3200TOP=m +# CONFIG_IWMC3200TOP_DEBUG is not set +# CONFIG_IWMC3200TOP_DEBUGFS is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -CONFIG_IDE_TIMINGS=y -CONFIG_IDE_ATAPI=y -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -CONFIG_IDE_GD_ATAPI=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_DELKIN=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -CONFIG_BLK_DEV_PLATFORM=m -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -CONFIG_BLK_DEV_IDEPNP=y -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CS5520=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_JMICRON=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8172=y -CONFIG_BLK_DEV_IT8213=y -CONFIG_BLK_DEV_IT821X=y -# CONFIG_BLK_DEV_NS87415 is not set -CONFIG_BLK_DEV_PDC202XX_OLD=y -CONFIG_BLK_DEV_PDC202XX_NEW=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_BLK_DEV_TC86C001=y -CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDE is not set # # SCSI device support @@ -1301,10 +1384,6 @@ CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -1323,13 +1402,17 @@ CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=y +CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m CONFIG_BLK_DEV_3W_XXXX_RAID=y +CONFIG_SCSI_HPSA=y CONFIG_SCSI_3W_9XXX=y +CONFIG_SCSI_3W_SAS=y CONFIG_SCSI_ACARD=y CONFIG_SCSI_AACRAID=y CONFIG_SCSI_AIC7XXX=y @@ -1345,8 +1428,10 @@ CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC94XX=m +CONFIG_SCSI_AIC94XX=y # CONFIG_AIC94XX_DEBUG is not set +CONFIG_SCSI_MVSAS=y +# CONFIG_SCSI_MVSAS_DEBUG is not set CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_ADVANSYS=y CONFIG_SCSI_ARCMSR=y @@ -1356,10 +1441,16 @@ CONFIG_MEGARAID_MM=y CONFIG_MEGARAID_MAILBOX=y CONFIG_MEGARAID_LEGACY=y CONFIG_MEGARAID_SAS=y +CONFIG_SCSI_MPT2SAS=y +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +# CONFIG_SCSI_MPT2SAS_LOGGING is not set CONFIG_SCSI_HPTIOP=y CONFIG_SCSI_BUSLOGIC=y +CONFIG_VMWARE_PVSCSI=m CONFIG_LIBFC=y +CONFIG_LIBFCOE=y CONFIG_FCOE=y +CONFIG_FCOE_FNIC=y CONFIG_SCSI_DMX3191D=y CONFIG_SCSI_EATA=y # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set @@ -1374,7 +1465,6 @@ CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_MVSAS=y CONFIG_SCSI_STEX=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -1392,18 +1482,26 @@ CONFIG_SCSI_LPFC=y CONFIG_SCSI_DC395x=y CONFIG_SCSI_DC390T=y CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_PMCRAID=y +CONFIG_SCSI_PM8001=y CONFIG_SCSI_SRP=y +CONFIG_SCSI_BFA_FC=y CONFIG_SCSI_LOWLEVEL_PCMCIA=y CONFIG_PCMCIA_FDOMAIN=m CONFIG_PCMCIA_QLOGIC=m CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=y -CONFIG_SCSI_DH_HP_SW=y -CONFIG_SCSI_DH_EMC=y -CONFIG_SCSI_DH_ALUA=y +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y @@ -1424,47 +1522,50 @@ CONFIG_SATA_VIA=y CONFIG_SATA_VITESSE=y CONFIG_SATA_INIC162X=y CONFIG_PATA_ACPI=y -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CS5520=m -CONFIG_PATA_CS5530=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m +CONFIG_PATA_ALI=y +CONFIG_PATA_AMD=y +CONFIG_PATA_ARTOP=y +CONFIG_PATA_ATP867X=y +CONFIG_PATA_ATIIXP=y +CONFIG_PATA_CMD640_PCI=y +CONFIG_PATA_CMD64X=y +CONFIG_PATA_CS5520=y +CONFIG_PATA_CS5530=y +CONFIG_PATA_CYPRESS=y +CONFIG_PATA_EFAR=y CONFIG_ATA_GENERIC=y -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m +CONFIG_PATA_HPT366=y +CONFIG_PATA_HPT37X=y +CONFIG_PATA_HPT3X2N=y +CONFIG_PATA_HPT3X3=y CONFIG_PATA_HPT3X3_DMA=y -CONFIG_PATA_IT821X=m -CONFIG_PATA_IT8213=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_TRIFLEX=m +CONFIG_PATA_IT821X=y +CONFIG_PATA_IT8213=y +CONFIG_PATA_JMICRON=y +CONFIG_PATA_TRIFLEX=y CONFIG_PATA_MARVELL=y -CONFIG_PATA_MPIIX=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_OPTIDMA=m +CONFIG_PATA_MPIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_NETCELL=y +CONFIG_PATA_NINJA32=y +CONFIG_PATA_NS87410=y +CONFIG_PATA_NS87415=y +CONFIG_PATA_OPTI=y +CONFIG_PATA_OPTIDMA=y CONFIG_PATA_PCMCIA=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RZ1000=m -CONFIG_PATA_SC1200=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_SIL680=m +CONFIG_PATA_PDC2027X=y +CONFIG_PATA_PDC_OLD=y +CONFIG_PATA_RADISYS=y +CONFIG_PATA_RDC=y +CONFIG_PATA_RZ1000=y +CONFIG_PATA_SC1200=y +CONFIG_PATA_SERVERWORKS=y +CONFIG_PATA_SIL680=y CONFIG_PATA_SIS=y -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m -CONFIG_PATA_SCH=m +CONFIG_PATA_TOSHIBA=m +CONFIG_PATA_VIA=y +CONFIG_PATA_WINBOND=y +CONFIG_PATA_SCH=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y @@ -1473,7 +1574,9 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +# CONFIG_MULTICORE_RAID456 is not set +CONFIG_MD_RAID6_PQ=y +CONFIG_ASYNC_RAID6_TEST=m CONFIG_MD_MULTIPATH=y CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -1481,17 +1584,20 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y +CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m # CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set +CONFIG_DM_UEVENT=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m +CONFIG_FUSION_CTL=y +CONFIG_FUSION_LAN=y # CONFIG_FUSION_LOGGING is not set # @@ -1499,13 +1605,17 @@ CONFIG_FUSION_LAN=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y -CONFIG_IEEE1394_OHCI1394=y -CONFIG_IEEE1394_PCILYNX=y -CONFIG_IEEE1394_SBP2=y +CONFIG_IEEE1394=m +CONFIG_IEEE1394_OHCI1394=m +CONFIG_IEEE1394_PCILYNX=m +CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m @@ -1572,9 +1682,11 @@ CONFIG_CASSINI=m CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m +CONFIG_ETHOC=m CONFIG_DNET=m CONFIG_NET_TULIP=y CONFIG_DE2104X=m +CONFIG_DE2104X_DSL=0 CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y @@ -1619,6 +1731,8 @@ CONFIG_SMSC9420=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m +CONFIG_KS8842=m +CONFIG_KS8851_MLL=m CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_SC92031=m @@ -1635,8 +1749,8 @@ CONFIG_E1000=m CONFIG_E1000E=m CONFIG_IP1000=m CONFIG_IGB=m -# CONFIG_IGB_LRO is not set CONFIG_IGB_DCA=y +CONFIG_IGBVF=m CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m @@ -1650,12 +1764,14 @@ CONFIG_SKY2=m CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m +CONFIG_CNIC=m CONFIG_QLA3XXX=m CONFIG_ATL1=m CONFIG_ATL1E=m CONFIG_ATL1C=m CONFIG_JME=m CONFIG_NETDEV_10000=y +CONFIG_MDIO=m CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3_DEPENDS=y @@ -1665,6 +1781,8 @@ CONFIG_IXGBE=m CONFIG_IXGBE_DCA=y CONFIG_IXGB=m CONFIG_S2IO=m +CONFIG_VXGE=m +# CONFIG_VXGE_DEBUG_TRACE_ALL is not set CONFIG_MYRI10GE=m CONFIG_MYRI10GE_DCA=y CONFIG_NETXEN_NIC=m @@ -1678,38 +1796,21 @@ CONFIG_QLGE=m CONFIG_SFC=m CONFIG_SFC_MTD=y CONFIG_BE2NET=m -CONFIG_TR=y +CONFIG_TR=m CONFIG_IBMOL=m CONFIG_3C359=m CONFIG_TMS380TR=m CONFIG_TMSPCI=m CONFIG_ABYSS=m - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y +CONFIG_WLAN=y CONFIG_PCMCIA_RAYCS=m -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m CONFIG_PCMCIA_ATMEL=m +CONFIG_AT76C50X_USB=m CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m CONFIG_PRISM54=m @@ -1717,15 +1818,47 @@ CONFIG_USB_ZD1201=m CONFIG_USB_NET_RNDIS_WLAN=m CONFIG_RTL8180=m CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y CONFIG_ADM8211=m # CONFIG_MAC80211_HWSIM is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m +CONFIG_MWL8K=m +CONFIG_ATH_COMMON=m +# CONFIG_ATH_DEBUG is not set CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m CONFIG_ATH9K=m -# CONFIG_ATH9K_DEBUG is not set +# CONFIG_ATH9K_DEBUGFS is not set +CONFIG_AR9170_USB=m +CONFIG_AR9170_LEDS=y +CONFIG_B43=m +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +CONFIG_B43_PCMCIA=y +CONFIG_B43_SDIO=y +CONFIG_B43_PIO=y +CONFIG_B43_PHY_LP=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_HWRNG=y +# CONFIG_B43LEGACY_DEBUG is not set +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_CS=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y # CONFIG_IPW2100_DEBUG is not set @@ -1738,61 +1871,56 @@ CONFIG_IPW2200_QOS=y CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG is not set CONFIG_IWLWIFI=m -CONFIG_IWLCORE=m -CONFIG_IWLWIFI_LEDS=y -# CONFIG_IWLWIFI_RFKILL is not set +CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y # CONFIG_IWLWIFI_DEBUG is not set +# CONFIG_IWLWIFI_DEVICE_TRACING is not set CONFIG_IWLAGN=m -CONFIG_IWLAGN_SPECTRUM_MEASUREMENT=y -CONFIG_IWLAGN_LEDS=y CONFIG_IWL4965=y CONFIG_IWL5000=y CONFIG_IWL3945=m -# CONFIG_IWL3945_RFKILL is not set CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y -CONFIG_IWL3945_LEDS=y -# CONFIG_IWL3945_DEBUG is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_B43=m -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_PCMCIA=y -CONFIG_B43_PIO=y -CONFIG_B43_LEDS=y -CONFIG_B43_RFKILL=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_RFKILL=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_IWM=m +# CONFIG_IWM_DEBUG is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_CS=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_HERMES=m +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_NORTEL_HERMES=m +CONFIG_PCI_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_PCI=m +CONFIG_P54_LEDS=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m CONFIG_RT61PCI=m +CONFIG_RT2800PCI_PCI=m +CONFIG_RT2800PCI=m CONFIG_RT2500USB=m CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800_LIB=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_HT=y CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_RFKILL=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set +CONFIG_WL12XX=m +CONFIG_WL1251=m +CONFIG_WL1251_SDIO=m +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set # # WiMAX Wireless Broadband devices @@ -1800,6 +1928,7 @@ CONFIG_RT2X00_LIB_LEDS=y CONFIG_WIMAX_I2400M=m CONFIG_WIMAX_I2400M_USB=m CONFIG_WIMAX_I2400M_SDIO=m +# CONFIG_WIMAX_IWMC3200_SDIO is not set CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 # @@ -1812,6 +1941,7 @@ CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_NET_GL620A=m @@ -1828,6 +1958,8 @@ CONFIG_USB_ARMLINUX=y # CONFIG_USB_KC2190 is not set CONFIG_USB_NET_ZAURUS=m CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m @@ -1892,6 +2024,8 @@ CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_HE=m # CONFIG_ATM_HE_USE_SUNI is not set CONFIG_ATM_SOLOS=m +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKEHARD=m CONFIG_FDDI=y CONFIG_DEFXX=m # CONFIG_DEFXX_MMIO is not set @@ -1923,7 +2057,9 @@ CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y CONFIG_VIRTIO_NET=m +CONFIG_VMXNET3=m CONFIG_ISDN=y +CONFIG_ISDN_I4L=m CONFIG_MISDN=m CONFIG_MISDN_DSP=m CONFIG_MISDN_L1OIP=m @@ -1934,7 +2070,13 @@ CONFIG_MISDN_L1OIP=m CONFIG_MISDN_HFCPCI=m CONFIG_MISDN_HFCMULTI=m CONFIG_MISDN_HFCUSB=m -CONFIG_ISDN_I4L=m +CONFIG_MISDN_AVMFRITZ=m +CONFIG_MISDN_SPEEDFAX=m +CONFIG_MISDN_INFINEON=m +CONFIG_MISDN_W6692=m +CONFIG_MISDN_NETJET=m +CONFIG_MISDN_IPAC=m +CONFIG_MISDN_ISAR=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y @@ -2007,19 +2149,13 @@ CONFIG_HISAX_ST5481=m CONFIG_HISAX_HFCUSB=m CONFIG_HISAX_HFC4S8S=m CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_HYSDN=m CONFIG_HYSDN_CAPI=y -CONFIG_ISDN_DRV_GIGASET=m -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -# CONFIG_GIGASET_M101 is not set -# CONFIG_GIGASET_DEBUG is not set -# CONFIG_GIGASET_UNDOCREQ is not set +CONFIG_ISDN_HDLC=m CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_CAPI_TRACE=y @@ -2046,6 +2182,14 @@ CONFIG_ISDN_DIVAS_PRIPCI=y CONFIG_ISDN_DIVAS_DIVACAPI=m CONFIG_ISDN_DIVAS_USERIDI=m CONFIG_ISDN_DIVAS_MAINT=m +CONFIG_ISDN_DRV_GIGASET=m +# CONFIG_GIGASET_CAPI is not set +CONFIG_GIGASET_I4L=y +# CONFIG_GIGASET_DUMMYLL is not set +CONFIG_GIGASET_BASE=m +CONFIG_GIGASET_M105=m +# CONFIG_GIGASET_M101 is not set +# CONFIG_GIGASET_DEBUG is not set CONFIG_PHONE=m CONFIG_PHONE_IXJ=m CONFIG_PHONE_IXJ_PCMCIA=m @@ -2056,6 +2200,7 @@ CONFIG_PHONE_IXJ_PCMCIA=m CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m # # Userland interfaces @@ -2072,13 +2217,19 @@ CONFIG_INPUT_EVDEV=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5588=m CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_QT2160=m # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=m +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_MAX7359=m # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_GPIO=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y @@ -2087,12 +2238,14 @@ CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m CONFIG_MOUSE_VSXXXAA=m CONFIG_MOUSE_GPIO=m +CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m @@ -2122,12 +2275,23 @@ CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y -# CONFIG_INPUT_TABLET is not set +# CONFIG_JOYSTICK_WALKERA0701 is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_AD7879_I2C=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_EETI=m CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_MCS5000=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_MK712=m @@ -2151,6 +2315,10 @@ CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y @@ -2164,7 +2332,9 @@ CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_WINBOND_CIR=m CONFIG_INPUT_PCF50633_PMU=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # # Hardware I/O ports @@ -2177,6 +2347,7 @@ CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m @@ -2207,9 +2378,6 @@ CONFIG_SYNCLINK_GT=m CONFIG_N_HDLC=m CONFIG_RISCOM8=m CONFIG_SPECIALIX=m -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set CONFIG_STALDRV=y CONFIG_STALLION=m CONFIG_ISTALLION=m @@ -2241,7 +2409,7 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m @@ -2254,8 +2422,10 @@ CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_NVRAM=m CONFIG_R3964=m @@ -2271,8 +2441,10 @@ CONFIG_IPWIRELESS=m CONFIG_MWAVE=m CONFIG_PC8736x_GPIO=m CONFIG_NSC_GPIO=m -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set +CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 +CONFIG_HPET=y +CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=m # CONFIG_TCG_TIS is not set @@ -2281,11 +2453,12 @@ CONFIG_TCG_ATMEL=m # CONFIG_TCG_INFINEON is not set CONFIG_TELCLOCK=m CONFIG_DEVPORT=y -CONFIG_I2C=y +CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCA=m # @@ -2313,6 +2486,11 @@ CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # +# ACPI drivers +# +CONFIG_I2C_SCMI=m + +# # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_GPIO=m @@ -2328,11 +2506,6 @@ CONFIG_I2C_TAOS_EVM=m CONFIG_I2C_TINY_USB=m # -# Graphics adapter I2C/DDC channel drivers -# -CONFIG_I2C_VOODOO3=m - -# # Other I2C/SMBus bus drivers # CONFIG_I2C_PCA_PLATFORM=m @@ -2341,17 +2514,21 @@ CONFIG_I2C_STUB=m # # Miscellaneous I2C Chip support # -CONFIG_DS1682=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_MAX6875=m CONFIG_SENSORS_TSL2550=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +CONFIG_PPS=m +# CONFIG_PPS_DEBUG is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y # @@ -2364,14 +2541,22 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_ADP5588=m # # PCI GPIO expanders: # +CONFIG_GPIO_CS5535=m +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# +# CONFIG_GPIO_UCB1400 is not set CONFIG_W1=m CONFIG_W1_CON=y @@ -2398,10 +2583,17 @@ CONFIG_POWER_SUPPLY=y CONFIG_PDA_POWER=m CONFIG_WM8350_POWER=m CONFIG_BATTERY_DS2760=m +CONFIG_BATTERY_DS2782=m CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_MAX17040=m CONFIG_CHARGER_PCF50633=m CONFIG_HWMON=m CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_ABITUGURU=m CONFIG_SENSORS_ABITUGURU3=m CONFIG_SENSORS_AD7414=m @@ -2417,6 +2609,7 @@ CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7473=m CONFIG_SENSORS_ADT7475=m CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_K10TEMP=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m @@ -2424,9 +2617,8 @@ CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_FSCHER=m -CONFIG_SENSORS_FSCPOS=m CONFIG_SENSORS_FSCHMD=m +CONFIG_SENSORS_G760A=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_CORETEMP=m @@ -2434,6 +2626,7 @@ CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m @@ -2444,18 +2637,26 @@ CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_AMC6821=m CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m @@ -2467,10 +2668,16 @@ CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_WM8350=m CONFIG_SENSORS_HDAPS=m -CONFIG_SENSORS_LIS3LV02D=m +CONFIG_SENSORS_LIS3_I2C=m CONFIG_SENSORS_APPLESMC=m -# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# ACPI drivers +# +CONFIG_SENSORS_ATK0110=m +CONFIG_SENSORS_LIS3LV02D=m CONFIG_THERMAL=m CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y @@ -2485,7 +2692,9 @@ CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m +CONFIG_GEODE_WDT=m CONFIG_SC520_WDT=m +CONFIG_SBC_FITPC2_WATCHDOG=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m CONFIG_IBMASR=m @@ -2516,7 +2725,6 @@ CONFIG_SBC_EPX_C3_WATCHDOG=m # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m -CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards @@ -2535,6 +2743,8 @@ CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y CONFIG_SSB_PCMCIAHOST=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y @@ -2547,20 +2757,17 @@ CONFIG_MFD_CORE=m CONFIG_HTC_PASIC3=m CONFIG_UCB1400_CORE=m CONFIG_TPS65010=m -# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set CONFIG_MFD_WM8400=m CONFIG_MFD_WM8350=m CONFIG_MFD_WM8350_I2C=m CONFIG_MFD_PCF50633=m CONFIG_PCF50633_ADC=m CONFIG_PCF50633_GPIO=m +CONFIG_AB3100_CORE=m +CONFIG_AB3100_OTP=m # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# +CONFIG_MEDIA_SUPPORT=m # # Multimedia core support @@ -2577,9 +2784,11 @@ CONFIG_VIDEO_MEDIA=m # CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m +CONFIG_IR_CORE=m +CONFIG_VIDEO_IR=m CONFIG_MEDIA_ATTACH=y CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_CUSTOMIZE=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m @@ -2596,6 +2805,8 @@ CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEOBUF_GEN=m @@ -2603,7 +2814,6 @@ CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y @@ -2635,17 +2845,22 @@ CONFIG_VIDEO_WM8739=m CONFIG_VIDEO_VP27SMPX=m # +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# # Video decoders # +CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_BT819=m CONFIG_VIDEO_BT856=m CONFIG_VIDEO_BT866=m CONFIG_VIDEO_KS0127=m CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_MT9V011=m CONFIG_VIDEO_TCM825X=m CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA7111=m -CONFIG_VIDEO_SAA7114=m CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_SAA717X=m CONFIG_VIDEO_SAA7191=m @@ -2670,6 +2885,8 @@ CONFIG_VIDEO_SAA7127=m CONFIG_VIDEO_SAA7185=m CONFIG_VIDEO_ADV7170=m CONFIG_VIDEO_ADV7175=m +CONFIG_VIDEO_THS7303=m +CONFIG_VIDEO_ADV7343=m # # Video improvement chips @@ -2679,7 +2896,6 @@ CONFIG_VIDEO_UPD64083=m CONFIG_VIDEO_VIVI=m CONFIG_VIDEO_BT848=m CONFIG_VIDEO_BT848_DVB=y -CONFIG_VIDEO_SAA6588=m CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_W9966=m @@ -2716,31 +2932,39 @@ CONFIG_VIDEO_AU0828=m CONFIG_VIDEO_IVTV=m CONFIG_VIDEO_FB_IVTV=m CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_SAA7164=m CONFIG_VIDEO_CAFE_CCIC=m CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_MT9M001=m -CONFIG_MT9M001_PCA9536_SWITCH=y CONFIG_SOC_CAMERA_MT9M111=m CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9T112=m CONFIG_SOC_CAMERA_MT9V022=m -CONFIG_MT9V022_PCA9536_SWITCH=y +CONFIG_SOC_CAMERA_RJ54N1=m CONFIG_SOC_CAMERA_TW9910=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_SOC_CAMERA_OV772X=m +CONFIG_SOC_CAMERA_OV9640=m CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_USB_M5602=m CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m CONFIG_USB_GSPCA_CONEX=m CONFIG_USB_GSPCA_ETOMS=m CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m CONFIG_USB_GSPCA_OV519=m CONFIG_USB_GSPCA_OV534=m CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SN9C20X_EVDEV=y CONFIG_USB_GSPCA_SONIXB=m CONFIG_USB_GSPCA_SONIXJ=m CONFIG_USB_GSPCA_SPCA500=m @@ -2749,7 +2973,10 @@ CONFIG_USB_GSPCA_SPCA505=m CONFIG_USB_GSPCA_SPCA506=m CONFIG_USB_GSPCA_SPCA508=m CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STV0680=m CONFIG_USB_GSPCA_SUNPLUS=m CONFIG_USB_GSPCA_T613=m CONFIG_USB_GSPCA_TV8532=m @@ -2759,9 +2986,13 @@ CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m CONFIG_VIDEO_EM28XX=m CONFIG_VIDEO_EM28XX_ALSA=m CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m CONFIG_VIDEO_USBVISION=m CONFIG_VIDEO_USBVIDEO=m CONFIG_USB_VICAM=m @@ -2778,6 +3009,7 @@ CONFIG_USB_STV680=m CONFIG_USB_ZC0301=m CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y CONFIG_USB_ZR364XX=m CONFIG_USB_STKWEBCAM=m CONFIG_USB_S2255=m @@ -2785,10 +3017,14 @@ CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_MAESTRO=m +CONFIG_I2C_SI4713=m +CONFIG_RADIO_SI4713=m CONFIG_USB_DSBR=m -CONFIG_USB_SI470X=m +# CONFIG_RADIO_SI470X is not set CONFIG_USB_MR800=m CONFIG_RADIO_TEA5764=m +CONFIG_RADIO_TEF6862=m +CONFIG_DVB_MAX_ADAPTERS=8 # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -2834,10 +3070,18 @@ CONFIG_DVB_USB_CINERGY_T2=m CONFIG_DVB_USB_ANYSEE=m CONFIG_DVB_USB_DTV5100=m CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_EC168=m CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_SIANO_SMS1XXX=m -CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y +CONFIG_SMS_SIANO_MDTV=m + +# +# Siano module components +# +CONFIG_SMS_USB_DRV=m +CONFIG_SMS_SDIO_DRV=m # # Supported FlexCopII (B2C2) Adapters @@ -2866,23 +3110,38 @@ CONFIG_DVB_DM1105=m # Supported FireWire (IEEE 1394) Adapters # CONFIG_DVB_FIREDTV=m +# CONFIG_DVB_FIREDTV_FIREWIRE is not set CONFIG_DVB_FIREDTV_IEEE1394=y CONFIG_DVB_FIREDTV_INPUT=y # +# Supported Earthsoft PT1 Adapters +# +CONFIG_DVB_PT1=m + +# +# Supported Mantis Adapters +# +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m + +# # Supported DVB Frontends # +CONFIG_DVB_FE_CUSTOMISE=y # # Customise DVB Frontends # -CONFIG_DVB_FE_CUSTOMISE=y # # Multistandard (satellite) frontends # CONFIG_DVB_STB0899=m CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m # # DVB-S (satellite) frontends @@ -2890,10 +3149,14 @@ CONFIG_DVB_STB6100=m CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m CONFIG_DVB_S5H1420=m CONFIG_DVB_STV0288=m CONFIG_DVB_STB6000=m CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m CONFIG_DVB_TDA8261=m @@ -2904,6 +3167,8 @@ CONFIG_DVB_TDA826X=m CONFIG_DVB_TUA6100=m CONFIG_DVB_CX24116=m CONFIG_DVB_SI21XX=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m # # DVB-T (terrestrial) frontends @@ -2923,6 +3188,8 @@ CONFIG_DVB_DIB3000MC=m CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m # # DVB-C (cable) frontends @@ -2941,6 +3208,7 @@ CONFIG_DVB_OR51132=m CONFIG_DVB_BCM3510=m CONFIG_DVB_LGDT330X=m CONFIG_DVB_LGDT3304=m +CONFIG_DVB_LGDT3305=m CONFIG_DVB_S5H1409=m CONFIG_DVB_AU8522=m CONFIG_DVB_S5H1411=m @@ -2949,12 +3217,14 @@ CONFIG_DVB_S5H1411=m # ISDB-T (terrestrial) frontends # CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m # # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=m CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m # # SEC control devices for DVB-S @@ -2962,32 +3232,39 @@ CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m # # Tools to develop new frontends # # CONFIG_DVB_DUMMY_FE is not set -CONFIG_DVB_AF9013=m CONFIG_DAB=y CONFIG_USB_DABUSB=m # # Graphics support # -CONFIG_AGP=y -CONFIG_AGP_AMD64=y +CONFIG_AGP=m +CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m CONFIG_AGP_SIS=m CONFIG_AGP_VIA=m +CONFIG_VGA_ARB=y CONFIG_DRM=m +CONFIG_DRM_KMS_HELPER=m +CONFIG_DRM_TTM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m +# CONFIG_DRM_RADEON_KMS is not set CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_I915=m -# CONFIG_DRM_I915_KMS is not set +CONFIG_DRM_I915_KMS=y CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m @@ -3028,6 +3305,7 @@ CONFIG_FB_ARC=m CONFIG_FB_VGA16=m # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y +# CONFIG_FB_EFI is not set CONFIG_FB_N411=m CONFIG_FB_HGA=m # CONFIG_FB_HGA_ACCEL is not set @@ -3042,16 +3320,12 @@ CONFIG_FB_RIVA_I2C=y CONFIG_FB_RIVA_BACKLIGHT=y CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m -CONFIG_FB_INTEL=m -# CONFIG_FB_INTEL_DEBUG is not set -CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_MATROX_MULTIHEAD=y CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y @@ -3075,10 +3349,10 @@ CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m # CONFIG_FB_3DFX_ACCEL is not set +CONFIG_FB_3DFX_I2C=y CONFIG_FB_VOODOO1=m CONFIG_FB_VT8623=m CONFIG_FB_TRIDENT=m -# CONFIG_FB_TRIDENT_ACCEL is not set CONFIG_FB_ARK=m CONFIG_FB_PM3=m CONFIG_FB_CARMINE=m @@ -3094,6 +3368,7 @@ CONFIG_FB_TMIO_ACCELL=y CONFIG_FB_METRONOME=m CONFIG_FB_MB862XX=m CONFIG_FB_MB862XX_PCI_GDC=y +CONFIG_FB_BROADSHEET=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -3141,6 +3416,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -3154,17 +3430,26 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +CONFIG_SND_DMA_SGBUF=y +CONFIG_SND_RAWMIDI_SEQ=m +CONFIG_SND_OPL3_LIB_SEQ=m +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y +# CONFIG_SND_PCSP is not set CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m @@ -3198,6 +3483,8 @@ CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS5530=m +CONFIG_SND_CS5535AUDIO=m +CONFIG_SND_CTXFI=m CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m @@ -3210,6 +3497,8 @@ CONFIG_SND_ECHO3G=m CONFIG_SND_INDIGO=m CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m @@ -3221,8 +3510,10 @@ CONFIG_SND_FM801_TEA575X_BOOL=y CONFIG_SND_FM801_TEA575X=m CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y -# CONFIG_SND_HDA_RECONFIG is not set +CONFIG_SND_HDA_RECONFIG=y # CONFIG_SND_HDA_INPUT_BEEP is not set +CONFIG_SND_HDA_INPUT_JACK=y +CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y @@ -3231,7 +3522,9 @@ CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y +CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y @@ -3244,6 +3537,7 @@ CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m +CONFIG_SND_LX6464ES=m CONFIG_SND_MAESTRO3=m CONFIG_SND_MIXART=m CONFIG_SND_NM256=m @@ -3272,45 +3566,54 @@ CONFIG_SND_PDAUDIOCF=m # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID=m CONFIG_HIDRAW=y # # USB Input Devices # -CONFIG_USB_HID=y +CONFIG_USB_HID=m CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EZKEY=m +CONFIG_HID_KYE=m +CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LOGITECH=m CONFIG_LOGITECH_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_NTRIG=m +CONFIG_HID_PANTHERLORD=m CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_GREENASIA_FF=m -CONFIG_HID_TOPSEED=y -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TOPSEED=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -3325,7 +3628,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y CONFIG_USB_WUSB=m @@ -3336,12 +3639,15 @@ CONFIG_USB_WUSB_CBAF=m # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=y +CONFIG_USB_XHCI_HCD=y +# CONFIG_USB_XHCI_HCD_DEBUGGING is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OXU210HP_HCD=y CONFIG_USB_ISP116X_HCD=y CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1362_HCD=y CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -3363,11 +3669,11 @@ CONFIG_USB_WDM=m CONFIG_USB_TMC=m # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -3403,7 +3709,7 @@ CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_CH341=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -3427,12 +3733,14 @@ CONFIG_USB_SERIAL_MOTOROLA=m CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QUALCOMM=m CONFIG_USB_SERIAL_SPCP8X5=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_SIEMENS_MPI=m CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m @@ -3455,10 +3763,6 @@ CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGET=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETMOTORCONTROL=m -CONFIG_USB_PHIDGETSERVO=m CONFIG_USB_IDMOUSE=m CONFIG_USB_FTDI_ELAN=m CONFIG_USB_APPLEDISPLAY=m @@ -3482,6 +3786,7 @@ CONFIG_USB_XUSBATM=m # CONFIG_USB_OTG_UTILS=y CONFIG_USB_GPIO_VBUS=m +CONFIG_NOP_USB_XCEIV=m CONFIG_UWB=m CONFIG_UWB_HWA=m CONFIG_UWB_WHCI=m @@ -3506,9 +3811,14 @@ CONFIG_SDIO_UART=m CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=m +CONFIG_MMC_SDHCI_PLTFM=m CONFIG_MMC_WBSD=m +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -3532,19 +3842,28 @@ CONFIG_LEDS_CLASS=m CONFIG_LEDS_ALIX2=m CONFIG_LEDS_PCA9532=m CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_LP3944=m CONFIG_LEDS_CLEVO_MAIL=m CONFIG_LEDS_PCA955X=m CONFIG_LEDS_WM8350=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_LT3593=m # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y CONFIG_INFINIBAND=m @@ -3554,7 +3873,7 @@ CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_IPATH=m +# CONFIG_INFINIBAND_IPATH is not set CONFIG_INFINIBAND_AMSO1100=m # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set # CONFIG_INFINIBAND_CXGB3 is not set @@ -3567,7 +3886,14 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_ISER=m -# CONFIG_EDAC is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_DECODE_MCE=y +# CONFIG_EDAC_MM_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m @@ -3594,9 +3920,11 @@ CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_FM3130=m CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m # # SPI RTC drivers @@ -3614,19 +3942,24 @@ CONFIG_RTC_DRV_STK17TA8=m CONFIG_RTC_DRV_M48T86=m CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m CONFIG_RTC_DRV_V3020=m CONFIG_RTC_DRV_WM8350=m CONFIG_RTC_DRV_PCF50633=m +CONFIG_RTC_DRV_AB3100=m # # on-CPU RTC drivers # +CONFIG_CS5535_CLOCK_EVENT_SRC=m CONFIG_DMADEVICES=y # # DMA Devices # +CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y CONFIG_INTEL_IOATDMA=m CONFIG_DMA_ENGINE=y @@ -3634,6 +3967,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # CONFIG_NET_DMA=y +# CONFIG_ASYNC_TX_DMA is not set CONFIG_DMATEST=m CONFIG_DCA=m CONFIG_AUXDISPLAY=y @@ -3643,22 +3977,25 @@ CONFIG_UIO_CIF=m CONFIG_UIO_PDRV=m CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_SMX=m +CONFIG_UIO_AEC=m CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m + +# +# TI VLYNQ +# CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_ET131X is not set # CONFIG_SLICOSS is not set -# CONFIG_SXG is not set -# CONFIG_ME4000 is not set -# CONFIG_MEILHAUS is not set # CONFIG_VIDEO_GO7007 is not set +CONFIG_VIDEO_CX25821=m +CONFIG_VIDEO_CX25821_ALSA=m # CONFIG_USB_IP_COMMON is not set # CONFIG_W35UND is not set # CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set -# CONFIG_USB_ATMEL is not set # CONFIG_POCH is not set -# CONFIG_AGNX is not set # CONFIG_OTUS is not set CONFIG_RT2860=m CONFIG_RT2870=m @@ -3666,22 +4003,66 @@ CONFIG_RT2870=m # CONFIG_ASUS_OLED is not set # CONFIG_PANEL is not set # CONFIG_ALTERA_PCIE_CHDMA is not set -CONFIG_RTL8187SE=m -# CONFIG_INPUT_MIMIO is not set +CONFIG_R8187SE=m +CONFIG_RTL8192SU=m +CONFIG_RTL8192U=m +CONFIG_RTL8192E=m # CONFIG_TRANZPORT is not set # -# Android +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +CONFIG_INPUT_GPIO=m +CONFIG_POHMELFS=m +# CONFIG_POHMELFS_DEBUG is not set +CONFIG_POHMELFS_CRYPTO=y +CONFIG_B3DFG=m +CONFIG_IDE_PHISON=m +CONFIG_PLAN9AUTH=m +CONFIG_LINE6_USB=m +CONFIG_DRM_VMWGFX=m +CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +CONFIG_DRM_NOUVEAU_DEBUG=y + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_USB_SERIAL_QUATECH2=m +CONFIG_USB_SERIAL_QUATECH_USB2=m +CONFIG_VT6655=m +CONFIG_VT6656=m +CONFIG_FB_UDL=m +# CONFIG_HYPERV is not set +# CONFIG_VME_BUS is not set + +# +# RAR Register Driver # -# CONFIG_ANDROID is not set -# CONFIG_ANDROID_BINDER_IPC is not set -# CONFIG_ANDROID_LOGGER is not set -# CONFIG_ANDROID_RAM_CONSOLE is not set -# CONFIG_ANDROID_TIMED_GPIO is not set -# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set +CONFIG_RAR_REGISTER=m +# CONFIG_DX_SEP is not set +# CONFIG_IIO is not set +CONFIG_RAMZSWAP=m +CONFIG_RAMZSWAP_STATS=y +CONFIG_BATMAN_ADV=m +# CONFIG_BATMAN_DEBUG is not set +CONFIG_SAMSUNG_LAPTOP=m +CONFIG_STRIP=m +CONFIG_PCMCIA_WAVELAN=m +CONFIG_PCMCIA_NETWAVE=m +CONFIG_FB_SM7XX=m +# CONFIG_FB_SM7XX_ACCEL is not set CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m +CONFIG_ACERHDF=m CONFIG_ASUS_LAPTOP=m +CONFIG_DELL_LAPTOP=m +CONFIG_DELL_WMI=m CONFIG_FUJITSU_LAPTOP=m # CONFIG_FUJITSU_LAPTOP_DEBUG is not set CONFIG_HP_WMI=m @@ -3691,23 +4072,29 @@ CONFIG_COMPAL_LAPTOP=m CONFIG_SONY_LAPTOP=m CONFIG_SONYPI_COMPAT=y CONFIG_THINKPAD_ACPI=m +CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set # CONFIG_THINKPAD_ACPI_DEBUG is not set -CONFIG_THINKPAD_ACPI_BAY=y +# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y CONFIG_INTEL_MENLOW=m CONFIG_EEEPC_LAPTOP=m CONFIG_ACPI_WMI=m +CONFIG_MSI_WMI=m CONFIG_ACPI_ASUS=m +CONFIG_TOPSTAR_LAPTOP=m CONFIG_ACPI_TOSHIBA=m +CONFIG_TOSHIBA_BT_RFKILL=m +CONFIG_ACPI_CMPC=m # # Firmware Drivers # CONFIG_EDD=m -# CONFIG_EDD_OFF is not set +CONFIG_EDD_OFF=y CONFIG_FIRMWARE_MEMMAP=y +CONFIG_EFI_VARS=m CONFIG_DELL_RBU=m CONFIG_DCDBAS=m CONFIG_DMIID=y @@ -3718,17 +4105,20 @@ CONFIG_ISCSI_IBFT=m # File systems # CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y @@ -3746,39 +4136,53 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=y -CONFIG_GFS2_FS_LOCKING_DLM=m -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=y +CONFIG_OCFS2_FS_O2CB=y +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y # CONFIG_OCFS2_FS_STATS is not set CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_OCFS2_FS_POSIX_ACL=y -CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_QUOTA_TREE=m +CONFIG_QUOTA_TREE=y CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m +CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # +# Caches +# +CONFIG_FSCACHE=m +# CONFIG_FSCACHE_STATS is not set +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -3850,16 +4254,23 @@ CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_NFSD=m +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y @@ -3868,10 +4279,9 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set @@ -3881,6 +4291,7 @@ CONFIG_CIFS_WEAK_PW_HASH=y # CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set # CONFIG_CIFS_EXPERIMENTAL is not set CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y @@ -3894,28 +4305,30 @@ CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set +# CONFIG_AFS_FSCACHE is not set CONFIG_9P_FS=m +# CONFIG_9P_FSCACHE is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y -# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y -# CONFIG_UNIXWARE_DISKLABEL is not set +CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set +CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set +CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y -# CONFIG_EFI_PARTITION is not set +CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" @@ -3957,7 +4370,7 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y -CONFIG_DLM=m +CONFIG_DLM=y # CONFIG_DLM_DEBUG is not set # @@ -3969,42 +4382,118 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=0 CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_VIRTUAL is not set +# CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y -# CONFIG_FRAME_POINTER is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE_NMI_ENTER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y +CONFIG_FTRACE_NMI_ENTER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y - -# -# Tracers -# +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set CONFIG_SYSPROF_TRACER=y +# CONFIG_SCHED_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_POWER_TRACER is not set +# CONFIG_KSYM_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_DYNAMIC_FTRACE=y +# CONFIG_FUNCTION_PROFILER is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set +CONFIG_RING_BUFFER_BENCHMARK=m # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +CONFIG_DEBUG_RODATA_TEST=y +# CONFIG_DEBUG_NX_TEST is not set +# CONFIG_IOMMU_DEBUG is not set +# CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 @@ -4015,7 +4504,10 @@ CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_OPTIMIZE_INLINING is not set +# CONFIG_DEBUG_BOOT_PARAMS is not set +# CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options @@ -4027,13 +4519,22 @@ CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set -CONFIG_SECURITY_FILE_CAPABILITIES=y -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_SECURITY_SELINUX is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_IMA is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y +CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y +CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y # @@ -4050,11 +4551,13 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m @@ -4075,18 +4578,21 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XTS=y +CONFIG_CRYPTO_FPU=y # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=m +CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y @@ -4099,12 +4605,14 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y +CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y +CONFIG_CRYPTO_AES_NI_INTEL=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y @@ -4127,6 +4635,7 @@ CONFIG_CRYPTO_TWOFISH_X86_64=y # Compression # CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -4134,19 +4643,24 @@ CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_PADLOCK=m +CONFIG_CRYPTO_DEV_PADLOCK_AES=m +CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m -# CONFIG_KVM_TRACE is not set CONFIG_VIRTIO=m CONFIG_VIRTIO_RING=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m +CONFIG_BINARY_PRINTF=y # # Library routines @@ -4165,15 +4679,20 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_DEC16=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y +CONFIG_NLATTR=y +CONFIG_LRU_CACHE=m diff --git a/source/k/config-speakup-2.6.29.6 b/source/k/config-speakup-2.6.33.4 index 36fb889dd..b241c4dfa 100644 --- a/source/k/config-speakup-2.6.29.6 +++ b/source/k/config-speakup-2.6.33.4 @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29.6 -# Mon Aug 17 12:03:53 2009 +# Linux kernel version: 2.6.33.4 +# Wed May 12 23:14:51 2010 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -16,7 +17,6 @@ CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y @@ -26,8 +26,8 @@ CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y @@ -35,6 +35,8 @@ CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -42,17 +44,18 @@ CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -62,23 +65,39 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 @@ -86,15 +105,19 @@ CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set +CONFIG_RELAY=y CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set -# CONFIG_NET_NS is not set +CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -102,6 +125,7 @@ CONFIG_ANON_INODES=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -116,6 +140,15 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -125,16 +158,28 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m # CONFIG_OPROFILE_IBS is not set +# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,7 +192,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -156,32 +200,56 @@ CONFIG_BLOCK_COMPAT=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # Processor type and features # -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y # CONFIG_SPARSE_IRQ is not set -CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y -CONFIG_X86_PC=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_VSMP is not set +# CONFIG_X86_EXTENDED_PLATFORM is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST=y @@ -209,12 +277,13 @@ CONFIG_MEMTEST=y # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set +# CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y @@ -223,7 +292,7 @@ CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR_64=y +CONFIG_CPU_SUP_CENTAUR=y # CONFIG_X86_DS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y @@ -234,11 +303,12 @@ CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set +# CONFIG_MAXSMP is not set CONFIG_NR_CPUS=32 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y @@ -246,6 +316,9 @@ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y +CONFIG_X86_MCE_INJECT=m +CONFIG_X86_THERMAL_VECTOR=y CONFIG_I8K=m CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y @@ -256,9 +329,12 @@ CONFIG_X86_CPUID=m CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set +CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_MEMORY_PROBE=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -268,42 +344,48 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y - -# -# Memory hotplug is currently incompatible with Software Suspend -# +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_MMU_NOTIFIER=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +# CONFIG_MEMORY_FAILURE is not set # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -# CONFIG_X86_PAT is not set -# CONFIG_EFI is not set +CONFIG_X86_PAT=y +CONFIG_ARCH_USES_PG_UNCACHED=y +CONFIG_EFI=y CONFIG_SECCOMP=y +CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 +CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # # Power management and ACPI options @@ -315,12 +397,15 @@ CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION_NVS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="\"\"" +CONFIG_PM_RUNTIME=y CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_POWER_METER=m CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m @@ -331,6 +416,7 @@ CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 @@ -338,7 +424,9 @@ CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_PCI_SLOT=m CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=m -# CONFIG_ACPI_SBS is not set +CONFIG_ACPI_HOTPLUG_MEMORY=m +CONFIG_ACPI_SBS=m +CONFIG_SFI=y # # CPU Frequency scaling @@ -364,7 +452,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_POWERNOW_K8=m -CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=m CONFIG_X86_P4_CLOCKMOD=m @@ -374,6 +461,7 @@ CONFIG_X86_P4_CLOCKMOD=m CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Memory power savings @@ -393,16 +481,20 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +CONFIG_PCIEAER_INJECT=m # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y -# CONFIG_PCI_STUB is not set +# CONFIG_PCI_DEBUG is not set +CONFIG_PCI_STUB=m CONFIG_HT_IRQ=y +# CONFIG_PCI_IOV is not set +CONFIG_PCI_IOAPIC=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y @@ -436,16 +528,16 @@ CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=m +# CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -483,7 +575,7 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_LRO=m +CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set @@ -505,6 +597,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -545,6 +638,8 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -554,6 +649,7 @@ CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -564,6 +660,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -587,6 +684,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_IP_VS=m # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set @@ -677,11 +775,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m @@ -719,12 +817,21 @@ CONFIG_INET_DCCP_DIAG=m # # CONFIG_IP_DCCP_CCID2_DEBUG is not set # CONFIG_IP_DCCP_CCID3 is not set + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -743,7 +850,7 @@ CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=y +CONFIG_LLC=m CONFIG_LLC2=m CONFIG_IPX=m # CONFIG_IPX_INTERN is not set @@ -756,6 +863,8 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +CONFIG_PHONET=m +CONFIG_IEEE802154=m CONFIG_NET_SCHED=y # @@ -792,7 +901,13 @@ CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m -# CONFIG_NET_EMATCH is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=m @@ -811,6 +926,7 @@ CONFIG_NET_SCH_FIFO=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set CONFIG_HAMRADIO=y # @@ -839,6 +955,17 @@ CONFIG_CAN_BCM=m # CAN Device Drivers # CONFIG_CAN_VCAN=m +CONFIG_CAN_DEV=m +# CONFIG_CAN_CALC_BITTIMING is not set +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_KVASER_PCI=m + +# +# CAN USB interfaces +# +CONFIG_CAN_EMS_USB=m # CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m @@ -924,17 +1051,27 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_DEBUG is not set CONFIG_RXKAD=m -CONFIG_PHONET=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y +CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=m CONFIG_LIB80211_CRYPT_WEP=m @@ -942,10 +1079,6 @@ CONFIG_LIB80211_CRYPT_CCMP=m CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -957,8 +1090,8 @@ CONFIG_MAC80211_LEDS=y CONFIG_WIMAX=m CONFIG_WIMAX_DEBUG_LEVEL=8 CONFIG_RFKILL=m -CONFIG_RFKILL_INPUT=m CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y CONFIG_NET_9P=m CONFIG_NET_9P_VIRTIO=m CONFIG_NET_9P_RDMA=m @@ -972,18 +1105,22 @@ CONFIG_NET_9P_RDMA=m # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set +CONFIG_MTD_TESTS=m CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_TESTS=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -1052,10 +1189,9 @@ CONFIG_MTD_ESB2ROM=m CONFIG_MTD_CK804XROM=m CONFIG_MTD_SCB2_FLASH=m CONFIG_MTD_NETtel=m -CONFIG_MTD_DILNETPC=m -CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000 CONFIG_MTD_L440GX=m CONFIG_MTD_PCI=m +CONFIG_MTD_GPIO_ADDR=m CONFIG_MTD_INTEL_VR_NOR=m CONFIG_MTD_PLATRAM=m @@ -1100,6 +1236,7 @@ CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_ALAUDA=m CONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_GENERIC=m CONFIG_MTD_ONENAND_OTP=y CONFIG_MTD_ONENAND_2X_PROGRAM=y CONFIG_MTD_ONENAND_SIM=m @@ -1116,7 +1253,7 @@ CONFIG_MTD_QINFO_PROBE=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_GLUEBI=m # # UBI debugging options @@ -1178,7 +1315,10 @@ CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_SX8=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -1192,6 +1332,7 @@ CONFIG_ATA_OVER_ETH=m CONFIG_VIRTIO_BLK=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +CONFIG_AD525X_DPOT=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m CONFIG_SGI_IOC4=m @@ -1199,11 +1340,11 @@ CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m CONFIG_ENCLOSURE_SERVICES=m -CONFIG_SGI_XP=m +CONFIG_CS5535_MFGPT=m +CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7 CONFIG_HP_ILO=m -CONFIG_SGI_GRU=m -# CONFIG_SGI_GRU_DEBUG is not set -CONFIG_DELL_LAPTOP=m +CONFIG_ISL29003=m +CONFIG_DS1682=m # CONFIG_C2PORT is not set # @@ -1211,74 +1352,16 @@ CONFIG_DELL_LAPTOP=m # CONFIG_EEPROM_AT24=m CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y +CONFIG_IWMC3200TOP=m +# CONFIG_IWMC3200TOP_DEBUG is not set +# CONFIG_IWMC3200TOP_DEBUGFS is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -CONFIG_IDE_TIMINGS=y -CONFIG_IDE_ATAPI=y -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -CONFIG_IDE_GD_ATAPI=y -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_DELKIN=m -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -CONFIG_BLK_DEV_PLATFORM=m -CONFIG_BLK_DEV_CMD640=y -CONFIG_BLK_DEV_CMD640_ENHANCED=y -CONFIG_BLK_DEV_IDEPNP=y -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -CONFIG_BLK_DEV_AEC62XX=y -CONFIG_BLK_DEV_ALI15X3=y -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_TRIFLEX=y -CONFIG_BLK_DEV_CS5520=y -CONFIG_BLK_DEV_CS5530=y -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_JMICRON=y -CONFIG_BLK_DEV_SC1200=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8172=y -CONFIG_BLK_DEV_IT8213=y -CONFIG_BLK_DEV_IT821X=y -# CONFIG_BLK_DEV_NS87415 is not set -CONFIG_BLK_DEV_PDC202XX_OLD=y -CONFIG_BLK_DEV_PDC202XX_NEW=y -CONFIG_BLK_DEV_SVWKS=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_BLK_DEV_SIS5513=y -CONFIG_BLK_DEV_SLC90E66=y -CONFIG_BLK_DEV_TRM290=y -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_BLK_DEV_TC86C001=y -CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDE is not set # # SCSI device support @@ -1301,10 +1384,6 @@ CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -1323,13 +1402,17 @@ CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=y +CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m CONFIG_BLK_DEV_3W_XXXX_RAID=y +CONFIG_SCSI_HPSA=y CONFIG_SCSI_3W_9XXX=y +CONFIG_SCSI_3W_SAS=y CONFIG_SCSI_ACARD=y CONFIG_SCSI_AACRAID=y CONFIG_SCSI_AIC7XXX=y @@ -1345,8 +1428,10 @@ CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC94XX=m +CONFIG_SCSI_AIC94XX=y # CONFIG_AIC94XX_DEBUG is not set +CONFIG_SCSI_MVSAS=y +# CONFIG_SCSI_MVSAS_DEBUG is not set CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_ADVANSYS=y CONFIG_SCSI_ARCMSR=y @@ -1356,10 +1441,16 @@ CONFIG_MEGARAID_MM=y CONFIG_MEGARAID_MAILBOX=y CONFIG_MEGARAID_LEGACY=y CONFIG_MEGARAID_SAS=y +CONFIG_SCSI_MPT2SAS=y +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +# CONFIG_SCSI_MPT2SAS_LOGGING is not set CONFIG_SCSI_HPTIOP=y CONFIG_SCSI_BUSLOGIC=y +CONFIG_VMWARE_PVSCSI=m CONFIG_LIBFC=y +CONFIG_LIBFCOE=y CONFIG_FCOE=y +CONFIG_FCOE_FNIC=y CONFIG_SCSI_DMX3191D=y CONFIG_SCSI_EATA=y # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set @@ -1374,7 +1465,6 @@ CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_MVSAS=y CONFIG_SCSI_STEX=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -1392,18 +1482,26 @@ CONFIG_SCSI_LPFC=y CONFIG_SCSI_DC395x=y CONFIG_SCSI_DC390T=y CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_PMCRAID=y +CONFIG_SCSI_PM8001=y CONFIG_SCSI_SRP=y +CONFIG_SCSI_BFA_FC=y CONFIG_SCSI_LOWLEVEL_PCMCIA=y CONFIG_PCMCIA_FDOMAIN=m CONFIG_PCMCIA_QLOGIC=m CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=y -CONFIG_SCSI_DH_HP_SW=y -CONFIG_SCSI_DH_EMC=y -CONFIG_SCSI_DH_ALUA=y +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y @@ -1424,47 +1522,50 @@ CONFIG_SATA_VIA=y CONFIG_SATA_VITESSE=y CONFIG_SATA_INIC162X=y CONFIG_PATA_ACPI=y -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CS5520=m -CONFIG_PATA_CS5530=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m +CONFIG_PATA_ALI=y +CONFIG_PATA_AMD=y +CONFIG_PATA_ARTOP=y +CONFIG_PATA_ATP867X=y +CONFIG_PATA_ATIIXP=y +CONFIG_PATA_CMD640_PCI=y +CONFIG_PATA_CMD64X=y +CONFIG_PATA_CS5520=y +CONFIG_PATA_CS5530=y +CONFIG_PATA_CYPRESS=y +CONFIG_PATA_EFAR=y CONFIG_ATA_GENERIC=y -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m +CONFIG_PATA_HPT366=y +CONFIG_PATA_HPT37X=y +CONFIG_PATA_HPT3X2N=y +CONFIG_PATA_HPT3X3=y CONFIG_PATA_HPT3X3_DMA=y -CONFIG_PATA_IT821X=m -CONFIG_PATA_IT8213=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_TRIFLEX=m +CONFIG_PATA_IT821X=y +CONFIG_PATA_IT8213=y +CONFIG_PATA_JMICRON=y +CONFIG_PATA_TRIFLEX=y CONFIG_PATA_MARVELL=y -CONFIG_PATA_MPIIX=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_OPTIDMA=m +CONFIG_PATA_MPIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_NETCELL=y +CONFIG_PATA_NINJA32=y +CONFIG_PATA_NS87410=y +CONFIG_PATA_NS87415=y +CONFIG_PATA_OPTI=y +CONFIG_PATA_OPTIDMA=y CONFIG_PATA_PCMCIA=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RZ1000=m -CONFIG_PATA_SC1200=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_SIL680=m +CONFIG_PATA_PDC2027X=y +CONFIG_PATA_PDC_OLD=y +CONFIG_PATA_RADISYS=y +CONFIG_PATA_RDC=y +CONFIG_PATA_RZ1000=y +CONFIG_PATA_SC1200=y +CONFIG_PATA_SERVERWORKS=y +CONFIG_PATA_SIL680=y CONFIG_PATA_SIS=y -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m -CONFIG_PATA_SCH=m +CONFIG_PATA_TOSHIBA=m +CONFIG_PATA_VIA=y +CONFIG_PATA_WINBOND=y +CONFIG_PATA_SCH=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y @@ -1473,7 +1574,9 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +# CONFIG_MULTICORE_RAID456 is not set +CONFIG_MD_RAID6_PQ=y +CONFIG_ASYNC_RAID6_TEST=m CONFIG_MD_MULTIPATH=y CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -1481,17 +1584,20 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y +CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m # CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set +CONFIG_DM_UEVENT=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m +CONFIG_FUSION_CTL=y +CONFIG_FUSION_LAN=y # CONFIG_FUSION_LOGGING is not set # @@ -1499,13 +1605,17 @@ CONFIG_FUSION_LAN=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y -CONFIG_IEEE1394_OHCI1394=y -CONFIG_IEEE1394_PCILYNX=y -CONFIG_IEEE1394_SBP2=y +CONFIG_IEEE1394=m +CONFIG_IEEE1394_OHCI1394=m +CONFIG_IEEE1394_PCILYNX=m +CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m @@ -1572,9 +1682,11 @@ CONFIG_CASSINI=m CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m +CONFIG_ETHOC=m CONFIG_DNET=m CONFIG_NET_TULIP=y CONFIG_DE2104X=m +CONFIG_DE2104X_DSL=0 CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y @@ -1619,6 +1731,8 @@ CONFIG_SMSC9420=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m +CONFIG_KS8842=m +CONFIG_KS8851_MLL=m CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_SC92031=m @@ -1635,8 +1749,8 @@ CONFIG_E1000=m CONFIG_E1000E=m CONFIG_IP1000=m CONFIG_IGB=m -# CONFIG_IGB_LRO is not set CONFIG_IGB_DCA=y +CONFIG_IGBVF=m CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m @@ -1650,12 +1764,14 @@ CONFIG_SKY2=m CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m +CONFIG_CNIC=m CONFIG_QLA3XXX=m CONFIG_ATL1=m CONFIG_ATL1E=m CONFIG_ATL1C=m CONFIG_JME=m CONFIG_NETDEV_10000=y +CONFIG_MDIO=m CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3_DEPENDS=y @@ -1665,6 +1781,8 @@ CONFIG_IXGBE=m CONFIG_IXGBE_DCA=y CONFIG_IXGB=m CONFIG_S2IO=m +CONFIG_VXGE=m +# CONFIG_VXGE_DEBUG_TRACE_ALL is not set CONFIG_MYRI10GE=m CONFIG_MYRI10GE_DCA=y CONFIG_NETXEN_NIC=m @@ -1678,38 +1796,21 @@ CONFIG_QLGE=m CONFIG_SFC=m CONFIG_SFC_MTD=y CONFIG_BE2NET=m -CONFIG_TR=y +CONFIG_TR=m CONFIG_IBMOL=m CONFIG_3C359=m CONFIG_TMS380TR=m CONFIG_TMSPCI=m CONFIG_ABYSS=m - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y +CONFIG_WLAN=y CONFIG_PCMCIA_RAYCS=m -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_AIRO=m -CONFIG_HERMES=m -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m CONFIG_PCMCIA_ATMEL=m +CONFIG_AT76C50X_USB=m CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m CONFIG_PRISM54=m @@ -1717,15 +1818,47 @@ CONFIG_USB_ZD1201=m CONFIG_USB_NET_RNDIS_WLAN=m CONFIG_RTL8180=m CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y CONFIG_ADM8211=m # CONFIG_MAC80211_HWSIM is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m +CONFIG_MWL8K=m +CONFIG_ATH_COMMON=m +# CONFIG_ATH_DEBUG is not set CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m CONFIG_ATH9K=m -# CONFIG_ATH9K_DEBUG is not set +# CONFIG_ATH9K_DEBUGFS is not set +CONFIG_AR9170_USB=m +CONFIG_AR9170_LEDS=y +CONFIG_B43=m +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +CONFIG_B43_PCMCIA=y +CONFIG_B43_SDIO=y +CONFIG_B43_PIO=y +CONFIG_B43_PHY_LP=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_HWRNG=y +# CONFIG_B43LEGACY_DEBUG is not set +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_CS=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y # CONFIG_IPW2100_DEBUG is not set @@ -1738,61 +1871,56 @@ CONFIG_IPW2200_QOS=y CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG is not set CONFIG_IWLWIFI=m -CONFIG_IWLCORE=m -CONFIG_IWLWIFI_LEDS=y -# CONFIG_IWLWIFI_RFKILL is not set +CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y # CONFIG_IWLWIFI_DEBUG is not set +# CONFIG_IWLWIFI_DEVICE_TRACING is not set CONFIG_IWLAGN=m -CONFIG_IWLAGN_SPECTRUM_MEASUREMENT=y -CONFIG_IWLAGN_LEDS=y CONFIG_IWL4965=y CONFIG_IWL5000=y CONFIG_IWL3945=m -# CONFIG_IWL3945_RFKILL is not set CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y -CONFIG_IWL3945_LEDS=y -# CONFIG_IWL3945_DEBUG is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_B43=m -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_PCMCIA=y -CONFIG_B43_PIO=y -CONFIG_B43_LEDS=y -CONFIG_B43_RFKILL=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_RFKILL=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_IWM=m +# CONFIG_IWM_DEBUG is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_CS=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_HERMES=m +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_NORTEL_HERMES=m +CONFIG_PCI_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_PCI=m +CONFIG_P54_LEDS=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m CONFIG_RT61PCI=m +CONFIG_RT2800PCI_PCI=m +CONFIG_RT2800PCI=m CONFIG_RT2500USB=m CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800_LIB=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_HT=y CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_RFKILL=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set +CONFIG_WL12XX=m +CONFIG_WL1251=m +CONFIG_WL1251_SDIO=m +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set # # WiMAX Wireless Broadband devices @@ -1800,6 +1928,7 @@ CONFIG_RT2X00_LIB_LEDS=y CONFIG_WIMAX_I2400M=m CONFIG_WIMAX_I2400M_USB=m CONFIG_WIMAX_I2400M_SDIO=m +# CONFIG_WIMAX_IWMC3200_SDIO is not set CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 # @@ -1812,6 +1941,7 @@ CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_NET_GL620A=m @@ -1828,6 +1958,8 @@ CONFIG_USB_ARMLINUX=y # CONFIG_USB_KC2190 is not set CONFIG_USB_NET_ZAURUS=m CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m @@ -1892,6 +2024,8 @@ CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_HE=m # CONFIG_ATM_HE_USE_SUNI is not set CONFIG_ATM_SOLOS=m +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKEHARD=m CONFIG_FDDI=y CONFIG_DEFXX=m # CONFIG_DEFXX_MMIO is not set @@ -1923,7 +2057,9 @@ CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y CONFIG_VIRTIO_NET=m +CONFIG_VMXNET3=m CONFIG_ISDN=y +CONFIG_ISDN_I4L=m CONFIG_MISDN=m CONFIG_MISDN_DSP=m CONFIG_MISDN_L1OIP=m @@ -1934,7 +2070,13 @@ CONFIG_MISDN_L1OIP=m CONFIG_MISDN_HFCPCI=m CONFIG_MISDN_HFCMULTI=m CONFIG_MISDN_HFCUSB=m -CONFIG_ISDN_I4L=m +CONFIG_MISDN_AVMFRITZ=m +CONFIG_MISDN_SPEEDFAX=m +CONFIG_MISDN_INFINEON=m +CONFIG_MISDN_W6692=m +CONFIG_MISDN_NETJET=m +CONFIG_MISDN_IPAC=m +CONFIG_MISDN_ISAR=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y @@ -2007,19 +2149,13 @@ CONFIG_HISAX_ST5481=m CONFIG_HISAX_HFCUSB=m CONFIG_HISAX_HFC4S8S=m CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_HYSDN=m CONFIG_HYSDN_CAPI=y -CONFIG_ISDN_DRV_GIGASET=m -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -# CONFIG_GIGASET_M101 is not set -# CONFIG_GIGASET_DEBUG is not set -# CONFIG_GIGASET_UNDOCREQ is not set +CONFIG_ISDN_HDLC=m CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_CAPI_TRACE=y @@ -2046,6 +2182,14 @@ CONFIG_ISDN_DIVAS_PRIPCI=y CONFIG_ISDN_DIVAS_DIVACAPI=m CONFIG_ISDN_DIVAS_USERIDI=m CONFIG_ISDN_DIVAS_MAINT=m +CONFIG_ISDN_DRV_GIGASET=m +# CONFIG_GIGASET_CAPI is not set +CONFIG_GIGASET_I4L=y +# CONFIG_GIGASET_DUMMYLL is not set +CONFIG_GIGASET_BASE=m +CONFIG_GIGASET_M105=m +# CONFIG_GIGASET_M101 is not set +# CONFIG_GIGASET_DEBUG is not set CONFIG_PHONE=m CONFIG_PHONE_IXJ=m CONFIG_PHONE_IXJ_PCMCIA=m @@ -2056,6 +2200,7 @@ CONFIG_PHONE_IXJ_PCMCIA=m CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m # # Userland interfaces @@ -2072,13 +2217,19 @@ CONFIG_INPUT_EVDEV=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5588=m CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_QT2160=m # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=m +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_MAX7359=m # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_GPIO=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y @@ -2087,12 +2238,14 @@ CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m CONFIG_MOUSE_VSXXXAA=m CONFIG_MOUSE_GPIO=m +CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m @@ -2122,12 +2275,23 @@ CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y -# CONFIG_INPUT_TABLET is not set +# CONFIG_JOYSTICK_WALKERA0701 is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_AD7879_I2C=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_EETI=m CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_MCS5000=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_MK712=m @@ -2151,6 +2315,10 @@ CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y @@ -2164,7 +2332,9 @@ CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_WINBOND_CIR=m CONFIG_INPUT_PCF50633_PMU=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # # Hardware I/O ports @@ -2177,6 +2347,7 @@ CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m @@ -2207,9 +2378,6 @@ CONFIG_SYNCLINK_GT=m CONFIG_N_HDLC=m CONFIG_RISCOM8=m CONFIG_SPECIALIX=m -CONFIG_SX=m -CONFIG_RIO=m -# CONFIG_RIO_OLDPCI is not set CONFIG_STALDRV=y CONFIG_STALLION=m CONFIG_ISTALLION=m @@ -2241,7 +2409,7 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m @@ -2254,8 +2422,10 @@ CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_NVRAM=m CONFIG_R3964=m @@ -2271,8 +2441,10 @@ CONFIG_IPWIRELESS=m CONFIG_MWAVE=m CONFIG_PC8736x_GPIO=m CONFIG_NSC_GPIO=m -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set +CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 +CONFIG_HPET=y +CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=m # CONFIG_TCG_TIS is not set @@ -2281,11 +2453,12 @@ CONFIG_TCG_ATMEL=m # CONFIG_TCG_INFINEON is not set CONFIG_TELCLOCK=m CONFIG_DEVPORT=y -CONFIG_I2C=y +CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCA=m # @@ -2313,6 +2486,11 @@ CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # +# ACPI drivers +# +CONFIG_I2C_SCMI=m + +# # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_GPIO=m @@ -2328,11 +2506,6 @@ CONFIG_I2C_TAOS_EVM=m CONFIG_I2C_TINY_USB=m # -# Graphics adapter I2C/DDC channel drivers -# -CONFIG_I2C_VOODOO3=m - -# # Other I2C/SMBus bus drivers # CONFIG_I2C_PCA_PLATFORM=m @@ -2341,17 +2514,21 @@ CONFIG_I2C_STUB=m # # Miscellaneous I2C Chip support # -CONFIG_DS1682=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_MAX6875=m CONFIG_SENSORS_TSL2550=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +CONFIG_PPS=m +# CONFIG_PPS_DEBUG is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y # @@ -2364,14 +2541,22 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_ADP5588=m # # PCI GPIO expanders: # +CONFIG_GPIO_CS5535=m +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# +# CONFIG_GPIO_UCB1400 is not set CONFIG_W1=m CONFIG_W1_CON=y @@ -2398,10 +2583,17 @@ CONFIG_POWER_SUPPLY=y CONFIG_PDA_POWER=m CONFIG_WM8350_POWER=m CONFIG_BATTERY_DS2760=m +CONFIG_BATTERY_DS2782=m CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_MAX17040=m CONFIG_CHARGER_PCF50633=m CONFIG_HWMON=m CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# CONFIG_SENSORS_ABITUGURU=m CONFIG_SENSORS_ABITUGURU3=m CONFIG_SENSORS_AD7414=m @@ -2417,6 +2609,7 @@ CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7473=m CONFIG_SENSORS_ADT7475=m CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_K10TEMP=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m @@ -2424,9 +2617,8 @@ CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_FSCHER=m -CONFIG_SENSORS_FSCPOS=m CONFIG_SENSORS_FSCHMD=m +CONFIG_SENSORS_G760A=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_CORETEMP=m @@ -2434,6 +2626,7 @@ CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m @@ -2444,18 +2637,26 @@ CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_AMC6821=m CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m @@ -2467,10 +2668,16 @@ CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_WM8350=m CONFIG_SENSORS_HDAPS=m -CONFIG_SENSORS_LIS3LV02D=m +CONFIG_SENSORS_LIS3_I2C=m CONFIG_SENSORS_APPLESMC=m -# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# ACPI drivers +# +CONFIG_SENSORS_ATK0110=m +CONFIG_SENSORS_LIS3LV02D=m CONFIG_THERMAL=m CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y @@ -2485,7 +2692,9 @@ CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m +CONFIG_GEODE_WDT=m CONFIG_SC520_WDT=m +CONFIG_SBC_FITPC2_WATCHDOG=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m CONFIG_IBMASR=m @@ -2516,7 +2725,6 @@ CONFIG_SBC_EPX_C3_WATCHDOG=m # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m -CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards @@ -2535,6 +2743,8 @@ CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y CONFIG_SSB_PCMCIAHOST=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y @@ -2547,20 +2757,17 @@ CONFIG_MFD_CORE=m CONFIG_HTC_PASIC3=m CONFIG_UCB1400_CORE=m CONFIG_TPS65010=m -# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set CONFIG_MFD_WM8400=m CONFIG_MFD_WM8350=m CONFIG_MFD_WM8350_I2C=m CONFIG_MFD_PCF50633=m CONFIG_PCF50633_ADC=m CONFIG_PCF50633_GPIO=m +CONFIG_AB3100_CORE=m +CONFIG_AB3100_OTP=m # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# +CONFIG_MEDIA_SUPPORT=m # # Multimedia core support @@ -2577,9 +2784,11 @@ CONFIG_VIDEO_MEDIA=m # CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m +CONFIG_IR_CORE=m +CONFIG_VIDEO_IR=m CONFIG_MEDIA_ATTACH=y CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_CUSTOMIZE=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m @@ -2596,6 +2805,8 @@ CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEOBUF_GEN=m @@ -2603,7 +2814,6 @@ CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y @@ -2635,17 +2845,22 @@ CONFIG_VIDEO_WM8739=m CONFIG_VIDEO_VP27SMPX=m # +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# # Video decoders # +CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_BT819=m CONFIG_VIDEO_BT856=m CONFIG_VIDEO_BT866=m CONFIG_VIDEO_KS0127=m CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_MT9V011=m CONFIG_VIDEO_TCM825X=m CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA7111=m -CONFIG_VIDEO_SAA7114=m CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_SAA717X=m CONFIG_VIDEO_SAA7191=m @@ -2670,6 +2885,8 @@ CONFIG_VIDEO_SAA7127=m CONFIG_VIDEO_SAA7185=m CONFIG_VIDEO_ADV7170=m CONFIG_VIDEO_ADV7175=m +CONFIG_VIDEO_THS7303=m +CONFIG_VIDEO_ADV7343=m # # Video improvement chips @@ -2679,7 +2896,6 @@ CONFIG_VIDEO_UPD64083=m CONFIG_VIDEO_VIVI=m CONFIG_VIDEO_BT848=m CONFIG_VIDEO_BT848_DVB=y -CONFIG_VIDEO_SAA6588=m CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_W9966=m @@ -2716,31 +2932,39 @@ CONFIG_VIDEO_AU0828=m CONFIG_VIDEO_IVTV=m CONFIG_VIDEO_FB_IVTV=m CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_SAA7164=m CONFIG_VIDEO_CAFE_CCIC=m CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_MT9M001=m -CONFIG_MT9M001_PCA9536_SWITCH=y CONFIG_SOC_CAMERA_MT9M111=m CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9T112=m CONFIG_SOC_CAMERA_MT9V022=m -CONFIG_MT9V022_PCA9536_SWITCH=y +CONFIG_SOC_CAMERA_RJ54N1=m CONFIG_SOC_CAMERA_TW9910=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_SOC_CAMERA_OV772X=m +CONFIG_SOC_CAMERA_OV9640=m CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_USB_M5602=m CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m CONFIG_USB_GSPCA_CONEX=m CONFIG_USB_GSPCA_ETOMS=m CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m CONFIG_USB_GSPCA_OV519=m CONFIG_USB_GSPCA_OV534=m CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SN9C20X_EVDEV=y CONFIG_USB_GSPCA_SONIXB=m CONFIG_USB_GSPCA_SONIXJ=m CONFIG_USB_GSPCA_SPCA500=m @@ -2749,7 +2973,10 @@ CONFIG_USB_GSPCA_SPCA505=m CONFIG_USB_GSPCA_SPCA506=m CONFIG_USB_GSPCA_SPCA508=m CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STV0680=m CONFIG_USB_GSPCA_SUNPLUS=m CONFIG_USB_GSPCA_T613=m CONFIG_USB_GSPCA_TV8532=m @@ -2759,9 +2986,13 @@ CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m CONFIG_VIDEO_EM28XX=m CONFIG_VIDEO_EM28XX_ALSA=m CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m CONFIG_VIDEO_USBVISION=m CONFIG_VIDEO_USBVIDEO=m CONFIG_USB_VICAM=m @@ -2778,6 +3009,7 @@ CONFIG_USB_STV680=m CONFIG_USB_ZC0301=m CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y CONFIG_USB_ZR364XX=m CONFIG_USB_STKWEBCAM=m CONFIG_USB_S2255=m @@ -2785,10 +3017,14 @@ CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_MAESTRO=m +CONFIG_I2C_SI4713=m +CONFIG_RADIO_SI4713=m CONFIG_USB_DSBR=m -CONFIG_USB_SI470X=m +# CONFIG_RADIO_SI470X is not set CONFIG_USB_MR800=m CONFIG_RADIO_TEA5764=m +CONFIG_RADIO_TEF6862=m +CONFIG_DVB_MAX_ADAPTERS=8 # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -2834,10 +3070,18 @@ CONFIG_DVB_USB_CINERGY_T2=m CONFIG_DVB_USB_ANYSEE=m CONFIG_DVB_USB_DTV5100=m CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_EC168=m CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_SIANO_SMS1XXX=m -CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y +CONFIG_SMS_SIANO_MDTV=m + +# +# Siano module components +# +CONFIG_SMS_USB_DRV=m +CONFIG_SMS_SDIO_DRV=m # # Supported FlexCopII (B2C2) Adapters @@ -2866,23 +3110,38 @@ CONFIG_DVB_DM1105=m # Supported FireWire (IEEE 1394) Adapters # CONFIG_DVB_FIREDTV=m +# CONFIG_DVB_FIREDTV_FIREWIRE is not set CONFIG_DVB_FIREDTV_IEEE1394=y CONFIG_DVB_FIREDTV_INPUT=y # +# Supported Earthsoft PT1 Adapters +# +CONFIG_DVB_PT1=m + +# +# Supported Mantis Adapters +# +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m + +# # Supported DVB Frontends # +CONFIG_DVB_FE_CUSTOMISE=y # # Customise DVB Frontends # -CONFIG_DVB_FE_CUSTOMISE=y # # Multistandard (satellite) frontends # CONFIG_DVB_STB0899=m CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m # # DVB-S (satellite) frontends @@ -2890,10 +3149,14 @@ CONFIG_DVB_STB6100=m CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m CONFIG_DVB_S5H1420=m CONFIG_DVB_STV0288=m CONFIG_DVB_STB6000=m CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m CONFIG_DVB_TDA8261=m @@ -2904,6 +3167,8 @@ CONFIG_DVB_TDA826X=m CONFIG_DVB_TUA6100=m CONFIG_DVB_CX24116=m CONFIG_DVB_SI21XX=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m # # DVB-T (terrestrial) frontends @@ -2923,6 +3188,8 @@ CONFIG_DVB_DIB3000MC=m CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m # # DVB-C (cable) frontends @@ -2941,6 +3208,7 @@ CONFIG_DVB_OR51132=m CONFIG_DVB_BCM3510=m CONFIG_DVB_LGDT330X=m CONFIG_DVB_LGDT3304=m +CONFIG_DVB_LGDT3305=m CONFIG_DVB_S5H1409=m CONFIG_DVB_AU8522=m CONFIG_DVB_S5H1411=m @@ -2949,12 +3217,14 @@ CONFIG_DVB_S5H1411=m # ISDB-T (terrestrial) frontends # CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m # # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=m CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m # # SEC control devices for DVB-S @@ -2962,32 +3232,39 @@ CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m # # Tools to develop new frontends # # CONFIG_DVB_DUMMY_FE is not set -CONFIG_DVB_AF9013=m CONFIG_DAB=y CONFIG_USB_DABUSB=m # # Graphics support # -CONFIG_AGP=y -CONFIG_AGP_AMD64=y +CONFIG_AGP=m +CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m CONFIG_AGP_SIS=m CONFIG_AGP_VIA=m +CONFIG_VGA_ARB=y CONFIG_DRM=m +CONFIG_DRM_KMS_HELPER=m +CONFIG_DRM_TTM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m +# CONFIG_DRM_RADEON_KMS is not set CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_I915=m -# CONFIG_DRM_I915_KMS is not set +CONFIG_DRM_I915_KMS=y CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m @@ -3028,6 +3305,7 @@ CONFIG_FB_ARC=m CONFIG_FB_VGA16=m # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y +# CONFIG_FB_EFI is not set CONFIG_FB_N411=m CONFIG_FB_HGA=m # CONFIG_FB_HGA_ACCEL is not set @@ -3042,16 +3320,12 @@ CONFIG_FB_RIVA_I2C=y CONFIG_FB_RIVA_BACKLIGHT=y CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m -CONFIG_FB_INTEL=m -# CONFIG_FB_INTEL_DEBUG is not set -CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_MATROX_MULTIHEAD=y CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y @@ -3075,10 +3349,10 @@ CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m # CONFIG_FB_3DFX_ACCEL is not set +CONFIG_FB_3DFX_I2C=y CONFIG_FB_VOODOO1=m CONFIG_FB_VT8623=m CONFIG_FB_TRIDENT=m -# CONFIG_FB_TRIDENT_ACCEL is not set CONFIG_FB_ARK=m CONFIG_FB_PM3=m CONFIG_FB_CARMINE=m @@ -3094,6 +3368,7 @@ CONFIG_FB_TMIO_ACCELL=y CONFIG_FB_METRONOME=m CONFIG_FB_MB862XX=m CONFIG_FB_MB862XX_PCI_GDC=y +CONFIG_FB_BROADSHEET=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -3141,6 +3416,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -3154,17 +3430,26 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +CONFIG_SND_DMA_SGBUF=y +CONFIG_SND_RAWMIDI_SEQ=m +CONFIG_SND_OPL3_LIB_SEQ=m +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y +# CONFIG_SND_PCSP is not set CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m @@ -3198,6 +3483,8 @@ CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS5530=m +CONFIG_SND_CS5535AUDIO=m +CONFIG_SND_CTXFI=m CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m @@ -3210,6 +3497,8 @@ CONFIG_SND_ECHO3G=m CONFIG_SND_INDIGO=m CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m @@ -3221,8 +3510,10 @@ CONFIG_SND_FM801_TEA575X_BOOL=y CONFIG_SND_FM801_TEA575X=m CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y -# CONFIG_SND_HDA_RECONFIG is not set +CONFIG_SND_HDA_RECONFIG=y # CONFIG_SND_HDA_INPUT_BEEP is not set +CONFIG_SND_HDA_INPUT_JACK=y +CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y @@ -3231,7 +3522,9 @@ CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y +CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y @@ -3244,6 +3537,7 @@ CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m +CONFIG_SND_LX6464ES=m CONFIG_SND_MAESTRO3=m CONFIG_SND_MIXART=m CONFIG_SND_NM256=m @@ -3272,45 +3566,54 @@ CONFIG_SND_PDAUDIOCF=m # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID=m CONFIG_HIDRAW=y # # USB Input Devices # -CONFIG_USB_HID=y +CONFIG_USB_HID=m CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EZKEY=m +CONFIG_HID_KYE=m +CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LOGITECH=m CONFIG_LOGITECH_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_NTRIG=m +CONFIG_HID_PANTHERLORD=m CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_GREENASIA_FF=m -CONFIG_HID_TOPSEED=y -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TOPSEED=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -3325,7 +3628,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y CONFIG_USB_WUSB=m @@ -3336,12 +3639,15 @@ CONFIG_USB_WUSB_CBAF=m # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=y +CONFIG_USB_XHCI_HCD=y +# CONFIG_USB_XHCI_HCD_DEBUGGING is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OXU210HP_HCD=y CONFIG_USB_ISP116X_HCD=y CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1362_HCD=y CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -3363,11 +3669,11 @@ CONFIG_USB_WDM=m CONFIG_USB_TMC=m # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -3403,7 +3709,7 @@ CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_CH341=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -3427,12 +3733,14 @@ CONFIG_USB_SERIAL_MOTOROLA=m CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QUALCOMM=m CONFIG_USB_SERIAL_SPCP8X5=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_SIEMENS_MPI=m CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m @@ -3455,10 +3763,6 @@ CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGET=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETMOTORCONTROL=m -CONFIG_USB_PHIDGETSERVO=m CONFIG_USB_IDMOUSE=m CONFIG_USB_FTDI_ELAN=m CONFIG_USB_APPLEDISPLAY=m @@ -3482,6 +3786,7 @@ CONFIG_USB_XUSBATM=m # CONFIG_USB_OTG_UTILS=y CONFIG_USB_GPIO_VBUS=m +CONFIG_NOP_USB_XCEIV=m CONFIG_UWB=m CONFIG_UWB_HWA=m CONFIG_UWB_WHCI=m @@ -3506,9 +3811,14 @@ CONFIG_SDIO_UART=m CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=m +CONFIG_MMC_SDHCI_PLTFM=m CONFIG_MMC_WBSD=m +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -3532,19 +3842,28 @@ CONFIG_LEDS_CLASS=m CONFIG_LEDS_ALIX2=m CONFIG_LEDS_PCA9532=m CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_LP3944=m CONFIG_LEDS_CLEVO_MAIL=m CONFIG_LEDS_PCA955X=m CONFIG_LEDS_WM8350=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_LT3593=m # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y @@ -3574,7 +3893,7 @@ CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_IPATH=m +# CONFIG_INFINIBAND_IPATH is not set CONFIG_INFINIBAND_AMSO1100=m # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set # CONFIG_INFINIBAND_CXGB3 is not set @@ -3587,7 +3906,14 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_ISER=m -# CONFIG_EDAC is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_DECODE_MCE=y +# CONFIG_EDAC_MM_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m @@ -3614,9 +3940,11 @@ CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_FM3130=m CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m # # SPI RTC drivers @@ -3634,19 +3962,24 @@ CONFIG_RTC_DRV_STK17TA8=m CONFIG_RTC_DRV_M48T86=m CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m CONFIG_RTC_DRV_V3020=m CONFIG_RTC_DRV_WM8350=m CONFIG_RTC_DRV_PCF50633=m +CONFIG_RTC_DRV_AB3100=m # # on-CPU RTC drivers # +CONFIG_CS5535_CLOCK_EVENT_SRC=m CONFIG_DMADEVICES=y # # DMA Devices # +CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y CONFIG_INTEL_IOATDMA=m CONFIG_DMA_ENGINE=y @@ -3654,6 +3987,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # CONFIG_NET_DMA=y +# CONFIG_ASYNC_TX_DMA is not set CONFIG_DMATEST=m CONFIG_DCA=m CONFIG_AUXDISPLAY=y @@ -3663,22 +3997,25 @@ CONFIG_UIO_CIF=m CONFIG_UIO_PDRV=m CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_SMX=m +CONFIG_UIO_AEC=m CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m + +# +# TI VLYNQ +# CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_ET131X is not set # CONFIG_SLICOSS is not set -# CONFIG_SXG is not set -# CONFIG_ME4000 is not set -# CONFIG_MEILHAUS is not set # CONFIG_VIDEO_GO7007 is not set +CONFIG_VIDEO_CX25821=m +CONFIG_VIDEO_CX25821_ALSA=m # CONFIG_USB_IP_COMMON is not set # CONFIG_W35UND is not set # CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set -# CONFIG_USB_ATMEL is not set # CONFIG_POCH is not set -# CONFIG_AGNX is not set # CONFIG_OTUS is not set CONFIG_RT2860=m CONFIG_RT2870=m @@ -3686,22 +4023,66 @@ CONFIG_RT2870=m # CONFIG_ASUS_OLED is not set # CONFIG_PANEL is not set # CONFIG_ALTERA_PCIE_CHDMA is not set -CONFIG_RTL8187SE=m -# CONFIG_INPUT_MIMIO is not set +CONFIG_R8187SE=m +CONFIG_RTL8192SU=m +CONFIG_RTL8192U=m +CONFIG_RTL8192E=m # CONFIG_TRANZPORT is not set # -# Android +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +CONFIG_INPUT_GPIO=m +CONFIG_POHMELFS=m +# CONFIG_POHMELFS_DEBUG is not set +CONFIG_POHMELFS_CRYPTO=y +CONFIG_B3DFG=m +CONFIG_IDE_PHISON=m +CONFIG_PLAN9AUTH=m +CONFIG_LINE6_USB=m +CONFIG_DRM_VMWGFX=m +CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +CONFIG_DRM_NOUVEAU_DEBUG=y + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_USB_SERIAL_QUATECH2=m +CONFIG_USB_SERIAL_QUATECH_USB2=m +CONFIG_VT6655=m +CONFIG_VT6656=m +CONFIG_FB_UDL=m +# CONFIG_HYPERV is not set +# CONFIG_VME_BUS is not set + +# +# RAR Register Driver # -# CONFIG_ANDROID is not set -# CONFIG_ANDROID_BINDER_IPC is not set -# CONFIG_ANDROID_LOGGER is not set -# CONFIG_ANDROID_RAM_CONSOLE is not set -# CONFIG_ANDROID_TIMED_GPIO is not set -# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set +CONFIG_RAR_REGISTER=m +# CONFIG_DX_SEP is not set +# CONFIG_IIO is not set +CONFIG_RAMZSWAP=m +CONFIG_RAMZSWAP_STATS=y +CONFIG_BATMAN_ADV=m +# CONFIG_BATMAN_DEBUG is not set +CONFIG_SAMSUNG_LAPTOP=m +CONFIG_STRIP=m +CONFIG_PCMCIA_WAVELAN=m +CONFIG_PCMCIA_NETWAVE=m +CONFIG_FB_SM7XX=m +# CONFIG_FB_SM7XX_ACCEL is not set CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m +CONFIG_ACERHDF=m CONFIG_ASUS_LAPTOP=m +CONFIG_DELL_LAPTOP=m +CONFIG_DELL_WMI=m CONFIG_FUJITSU_LAPTOP=m # CONFIG_FUJITSU_LAPTOP_DEBUG is not set CONFIG_HP_WMI=m @@ -3711,23 +4092,29 @@ CONFIG_COMPAL_LAPTOP=m CONFIG_SONY_LAPTOP=m CONFIG_SONYPI_COMPAT=y CONFIG_THINKPAD_ACPI=m +CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set # CONFIG_THINKPAD_ACPI_DEBUG is not set -CONFIG_THINKPAD_ACPI_BAY=y +# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y CONFIG_INTEL_MENLOW=m CONFIG_EEEPC_LAPTOP=m CONFIG_ACPI_WMI=m +CONFIG_MSI_WMI=m CONFIG_ACPI_ASUS=m +CONFIG_TOPSTAR_LAPTOP=m CONFIG_ACPI_TOSHIBA=m +CONFIG_TOSHIBA_BT_RFKILL=m +CONFIG_ACPI_CMPC=m # # Firmware Drivers # CONFIG_EDD=m -# CONFIG_EDD_OFF is not set +CONFIG_EDD_OFF=y CONFIG_FIRMWARE_MEMMAP=y +CONFIG_EFI_VARS=m CONFIG_DELL_RBU=m CONFIG_DCDBAS=m CONFIG_DMIID=y @@ -3738,17 +4125,20 @@ CONFIG_ISCSI_IBFT=m # File systems # CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y @@ -3766,39 +4156,53 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=y -CONFIG_GFS2_FS_LOCKING_DLM=m -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=y +CONFIG_OCFS2_FS_O2CB=y +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y # CONFIG_OCFS2_FS_STATS is not set CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_OCFS2_FS_POSIX_ACL=y -CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_QUOTA_TREE=m +CONFIG_QUOTA_TREE=y CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m +CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # +# Caches +# +CONFIG_FSCACHE=m +# CONFIG_FSCACHE_STATS is not set +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -3870,16 +4274,23 @@ CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_NFSD=m +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y @@ -3888,10 +4299,9 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set @@ -3901,6 +4311,7 @@ CONFIG_CIFS_WEAK_PW_HASH=y # CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set # CONFIG_CIFS_EXPERIMENTAL is not set CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y @@ -3914,28 +4325,30 @@ CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set +# CONFIG_AFS_FSCACHE is not set CONFIG_9P_FS=m +# CONFIG_9P_FSCACHE is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y -# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y -# CONFIG_UNIXWARE_DISKLABEL is not set +CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set +CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set +CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y -# CONFIG_EFI_PARTITION is not set +CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" @@ -3977,7 +4390,7 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y -CONFIG_DLM=m +CONFIG_DLM=y # CONFIG_DLM_DEBUG is not set # @@ -3989,42 +4402,118 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=0 CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_VIRTUAL is not set +# CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y -# CONFIG_FRAME_POINTER is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE_NMI_ENTER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y +CONFIG_FTRACE_NMI_ENTER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y - -# -# Tracers -# +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set CONFIG_SYSPROF_TRACER=y +# CONFIG_SCHED_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_POWER_TRACER is not set +# CONFIG_KSYM_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_DYNAMIC_FTRACE=y +# CONFIG_FUNCTION_PROFILER is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set +CONFIG_RING_BUFFER_BENCHMARK=m # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +CONFIG_DEBUG_RODATA_TEST=y +# CONFIG_DEBUG_NX_TEST is not set +# CONFIG_IOMMU_DEBUG is not set +# CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 @@ -4035,7 +4524,10 @@ CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_OPTIMIZE_INLINING is not set +# CONFIG_DEBUG_BOOT_PARAMS is not set +# CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options @@ -4047,13 +4539,22 @@ CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set -CONFIG_SECURITY_FILE_CAPABILITIES=y -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_SECURITY_SELINUX is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_IMA is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y +CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y +CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y # @@ -4070,11 +4571,13 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m @@ -4095,18 +4598,21 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XTS=y +CONFIG_CRYPTO_FPU=y # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=m +CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y @@ -4119,12 +4625,14 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_TGR192=y CONFIG_CRYPTO_WP512=y +CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y +CONFIG_CRYPTO_AES_NI_INTEL=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=y @@ -4147,6 +4655,7 @@ CONFIG_CRYPTO_TWOFISH_X86_64=y # Compression # CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -4154,19 +4663,24 @@ CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_PADLOCK=m +CONFIG_CRYPTO_DEV_PADLOCK_AES=m +CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m -# CONFIG_KVM_TRACE is not set CONFIG_VIRTIO=m CONFIG_VIRTIO_RING=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m +CONFIG_BINARY_PRINTF=y # # Library routines @@ -4185,15 +4699,20 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_DEC16=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y +CONFIG_NLATTR=y +CONFIG_LRU_CACHE=m diff --git a/source/k/kernel-firmware/kernel-firmware.SlackBuild b/source/k/kernel-firmware/kernel-firmware.SlackBuild index 5299ee4ac..400200042 100755 --- a/source/k/kernel-firmware/kernel-firmware.SlackBuild +++ b/source/k/kernel-firmware/kernel-firmware.SlackBuild @@ -25,17 +25,17 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-kernel-firmware -VERSION=${VERSION:-2.6.29.6} +VERSION=${VERSION:-2.6.33.4} ARCH=${ARCH:-noarch} BUILD=${BUILD:-1} rm -rf $PKG mkdir -p $TMP $PKG -echo "Using /usr/src/linux-2.6.29.6/" +echo "Using /usr/src/linux-2.6.33.4/" echo "Make sure this is *ready*..." mkdir -p $PKG/lib/firmware -( cd /usr/src/linux-2.6.29.6 && make firmware_install INSTALL_FW_PATH=$PKG/lib/firmware ) -cp -a /usr/src/linux-2.6.29.6/firmware/WHENCE $PKG/lib/firmware +( cd /usr/src/linux-2.6.33.4 && make firmware_install INSTALL_FW_PATH=$PKG/lib/firmware ) +cp -a /usr/src/linux-2.6.33.4/firmware/WHENCE $PKG/lib/firmware mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/k/kernel-generic/kernel-generic.SlackBuild b/source/k/kernel-generic/kernel-generic.SlackBuild index 57450f86b..02978595b 100755 --- a/source/k/kernel-generic/kernel-generic.SlackBuild +++ b/source/k/kernel-generic/kernel-generic.SlackBuild @@ -22,7 +22,7 @@ KERNNAME=generic -VERSION=${VERSION:-2.6.29.6} +VERSION=${VERSION:-2.6.33.4} ARCH=${ARCH:-x86_64} KARCH=${KARCH:-x86} BUILD=${BUILD:-1} diff --git a/source/k/kernel-huge/kernel-huge.SlackBuild b/source/k/kernel-huge/kernel-huge.SlackBuild index 79497d2d8..9961e876c 100755 --- a/source/k/kernel-huge/kernel-huge.SlackBuild +++ b/source/k/kernel-huge/kernel-huge.SlackBuild @@ -22,7 +22,7 @@ KERNNAME=huge -VERSION=${VERSION:-2.6.29.6} +VERSION=${VERSION:-2.6.33.4} ARCH=${ARCH:-x86_64} KARCH=${KARCH:-x86} BUILD=${BUILD:-1} diff --git a/source/k/kernel-modules/kernel-modules.SlackBuild b/source/k/kernel-modules/kernel-modules.SlackBuild index 8ff699aad..369c39c26 100755 --- a/source/k/kernel-modules/kernel-modules.SlackBuild +++ b/source/k/kernel-modules/kernel-modules.SlackBuild @@ -21,7 +21,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.6.29.6} +VERSION=${VERSION:-2.6.33.4} ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} diff --git a/source/k/linux-2.6.29.6-01-sendpage.diff b/source/k/linux-2.6.29.6-01-sendpage.diff deleted file mode 100644 index d1e7a07af..000000000 --- a/source/k/linux-2.6.29.6-01-sendpage.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./net/socket.c.orig 2009-08-02 14:29:53.000000000 -0500 -+++ ./net/socket.c 2009-08-15 13:03:44.000000000 -0500 -@@ -694,7 +694,7 @@ - if (more) - flags |= MSG_MORE; - -- return sock->ops->sendpage(sock, page, offset, size, flags); -+ return kernel_sendpage(sock, page, offset, size, flags); - } - - static ssize_t sock_splice_read(struct file *file, loff_t *ppos, diff --git a/source/k/linux-2.6.29.6-02-default-mmap_min_addr-4096.diff b/source/k/linux-2.6.29.6-02-default-mmap_min_addr-4096.diff deleted file mode 100644 index 53d2b5a02..000000000 --- a/source/k/linux-2.6.29.6-02-default-mmap_min_addr-4096.diff +++ /dev/null @@ -1,22 +0,0 @@ ---- ./arch/x86/configs/i386_defconfig.orig 2009-07-02 18:41:20.000000000 -0500 -+++ ./arch/x86/configs/i386_defconfig 2009-08-16 21:03:21.000000000 -0500 -@@ -2127,7 +2127,7 @@ - # CONFIG_SECURITY_NETWORK_XFRM is not set - CONFIG_SECURITY_FILE_CAPABILITIES=y - # CONFIG_SECURITY_ROOTPLUG is not set --CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 -+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=4096 - CONFIG_SECURITY_SELINUX=y - CONFIG_SECURITY_SELINUX_BOOTPARAM=y - CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 ---- ./arch/x86/configs/x86_64_defconfig.orig 2009-07-02 18:41:20.000000000 -0500 -+++ ./arch/x86/configs/x86_64_defconfig 2009-08-16 21:03:33.000000000 -0500 -@@ -2096,7 +2096,7 @@ - # CONFIG_SECURITY_NETWORK_XFRM is not set - CONFIG_SECURITY_FILE_CAPABILITIES=y - # CONFIG_SECURITY_ROOTPLUG is not set --CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 -+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=4096 - CONFIG_SECURITY_SELINUX=y - CONFIG_SECURITY_SELINUX_BOOTPARAM=y - CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 diff --git a/source/k/linux-2.6.33.4.tar.sign b/source/k/linux-2.6.33.4.tar.sign new file mode 100644 index 000000000..df6df4764 --- /dev/null +++ b/source/k/linux-2.6.33.4.tar.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBL6yrhyGugalF9Dw4RAl8SAKCGZjbaryAxyoi9JGPRpL3JRTTyEQCeMJIf +A492a4GfHfenmWC5lfRpckw= +=2DYq +-----END PGP SIGNATURE----- diff --git a/source/kde/KDE.SlackBuild b/source/kde/KDE.SlackBuild index d8914eb54..19f6ba5b8 100755 --- a/source/kde/KDE.SlackBuild +++ b/source/kde/KDE.SlackBuild @@ -1,8 +1,9 @@ #!/bin/sh -# Build (and install) all KDE packages. +# Build (and install) all KDE core packages. # Written for Slackware by volkerdi@slackware.com. # Modified for KDE4 by Robby Workman <rworkman@slackware.com> +# Modified for KDE4 by Eric Hameleers <alien@slackware.com> # kdeaccessibility builds plugins for epos, festival, flite, freetts, and # hadifix, so they should work with kde if any of those are installed later @@ -17,36 +18,31 @@ QTDIR=/usr/lib${LIBDIRSUFFIX}/qt ; export QTDIR [ -d kdebase ] && eval $(sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" ./kdebase/profile.d/kde.sh) KDEMODS=" \ + polkit-qt-1 \ kdelibs \ kdepimlibs \ - kdebase-workspace \ kdebase \ kdebase-workspace \ kdebase-runtime \ + kdesdk \ + kdegraphics \ + kdebindings \ + kdebase-workspace \ kdeaccessibility \ kdeutils \ kdemultimedia \ kdenetwork \ + oxygen-icons \ kdeadmin \ kdeartwork \ kdegames \ kdetoys \ - kdegraphics \ - kdesdk \ kdepim \ + kdepim-runtime \ kdeedu \ - kdeplasma-addons \ - kdebindings \ kdewebdev \ - kdevplatform \ - kdevelop \ - konq-plugins \ - koffice \ - amarok \ - guidance-power-manager \ - kaudiocreator \ - ktorrent \ - skanlite" + kdeplasma-addons \ + polkit-kde-1 " # Allow for specification of individual packages to be built: if [ -z "$1" ]; then diff --git a/source/kde/KDE.options b/source/kde/KDE.options index d5e478fec..730f3f460 100644 --- a/source/kde/KDE.options +++ b/source/kde/KDE.options @@ -3,10 +3,19 @@ # usually has a different version number), or by setting your own # environment variables. -[ -z $VERSION ] && export VERSION=4.2.4 -[ -z $ARCH ] && export ARCH=x86_64 +[ -z $VERSION ] && export VERSION=4.4.3 [ -z $BUILD ] && export BUILD=1 +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + # Use this as CFLAGS and CXXFLAGS: if [ -z "$SLKCFLAGS" ]; then if [ "$ARCH" = "i486" ]; then @@ -24,6 +33,9 @@ if [ -z "$SLKCFLAGS" ]; then elif [ "$ARCH" = "armel" ]; then export SLKCFLAGS="-O2 -march=armv4t" export LIBDIRSUFFIX="" + else + export SLKCFLAGS="-O2" + export LIBDIRSUFFIX="" fi fi @@ -32,3 +44,8 @@ if [ -z "$NUMJOBS" ]; then export NUMJOBS="-j7" fi +# Additional cmake flags that are spanned across the KDE modules +# Do not use "final build" unless we build an actual release. +#export KDE_OPT_ARGS=" -DKDE4_ENABLE_FINAL=\"ON\" -DSITE=\"slackware.com\" " +export KDE_OPT_ARGS=" -DSITE=\"slackware.com\" " + diff --git a/source/kde/KDE_extra.SlackBuild b/source/kde/KDE_extra.SlackBuild new file mode 100755 index 000000000..9b702457d --- /dev/null +++ b/source/kde/KDE_extra.SlackBuild @@ -0,0 +1,54 @@ +#!/bin/sh + +# Build (and install) all KDE "extra" packages. +# Written for Slackware by volkerdi@slackware.com. +# Modified for KDE4 by Robby Workman <rworkman@slackware.com> +# Modified for KDE4 by Eric Hameleers <alien@slackware.com> + +# Set the config option variables if they are not already set: +[ -r ./KDE.options ] && . ./KDE.options + +# This avoids compiling a version number into KDE's .la files: +QTDIR=/usr/lib${LIBDIRSUFFIX}/qt ; export QTDIR + +# Get the kde environment variables +[ -d kdebase ] && eval $(sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" ./kdebase/profile.d/kde.sh) + +KDEMODS=" \ + kdevplatform \ + kdevelop \ + konq-plugins \ + guidance-power-manager \ + kopete-cryptography \ + ktorrent \ + skanlite \ + koffice \ + kaudiocreator \ + amarok \ + k3b" + +# Allow for specification of individual packages to be built: +if [ -z "$1" ]; then + MODQUEUE=$KDEMODS +else + MODQUEUE=$* +fi + +for module in \ + $MODQUEUE ; +do + cd $module + ./$module.SlackBuild + if [ $? = 0 ]; then + # Yes, I will build with the fresh packages installed: + upgradepkg --install-new --reinstall /tmp/${module}-*.txz + # Keep MIME database current: + /usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null & + rm -rf /tmp/package-${module} /tmp/${module}-$VERSION + else + echo "${module} failed to build." + exit 1 + fi + cd - ; +done + diff --git a/source/kde/amarok/amarok.SlackBuild b/source/kde/amarok/amarok.SlackBuild index e7d60e69c..2a6fc0829 100755 --- a/source/kde/amarok/amarok.SlackBuild +++ b/source/kde/amarok/amarok.SlackBuild @@ -39,47 +39,14 @@ if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then QTDIR=/usr/lib${LIBDIRSUFFIX}/qt fi -# If there's no libmysqld.a, we have to build it: +# Notify the user if libmysqld.a (embedded mysql) is missing: if [ ! -r /usr/lib${LIBDIRSUFFIX}/mysql/libmysqld.a ]; then - MYSQL="$CWD/../../ap/mysql/mysql*.tar.?z*" - if [ ! -e "$MYSQL" ]; then - if [ -e "$CWD/mysql*.tar.?z*" ]; then - MYSQL="$CWD/mysql*.tar.?z*" - fi - fi - ( cd $TMP - tar xvf $MYSQL - MYSQLDIR="mysql-$(basename $(echo $MYSQL | rev | cut -f 1 -d - | rev) .tar.bz2)" - if [ -d "$MYSQLDIR" ]; then - cd "$MYSQLDIR" - CFLAGS=" $SLKCFLAGS -fPIC" CXXFLAGS=" $SLKCFLAGS -fPIC" \ - ./configure \ - --prefix=/usr \ - --with-mysqld-user=mysql \ - --with-unix-socket-path=/var/run/mysql/mysql.sock \ - --localstatedir=/var/lib${LIBDIRSUFFIX}/mysql \ - --enable-assembler \ - --with-raid \ - --without-debug \ - --enable-thread-safe-client \ - --without-bench \ - --with-extra-charsets=complex \ - --with-embedded-server \ - --with-vio \ - --with-pic \ - --with-openssl \ - --build=$ARCH-slackware-linux - make $NUMJOBS || make || exit 1 - mkdir -p /usr/lib${LIBDIRSUFFIX}/mysql - cp libmysqld/libmysqld.a /usr/lib${LIBDIRSUFFIX}/mysql - fi - ) -fi - -if [ ! -r /usr/lib${LIBDIRSUFFIX}/mysql/libmysqld.a ]; then - echo "ERROR: No libmysqld.a. Strongly advised to put a MySQL source .tar.bz2 in" - echo "this directory and try again..." - sleep 10 + cat << EOF +ERROR: missing /usr/lib${LIBDIRSUFFIX}/mysql/libmysqld.a + please use mysql-embedded.build in source/ap/mysql/ + to build and install this, and then try again. +EOF + exit 1 fi rm -rf $PKG @@ -89,9 +56,6 @@ echo "Building amarok-$VERSION..." tar xvf $CWD/../src/extragear/amarok-$VERSION.tar.?z* || exit 1 cd amarok-$VERSION -# Make qtscript optional instead of required: -#zcat $CWD/amarok.qtscript.optional.diff.gz | patch -p1 --verbose || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -109,6 +73,7 @@ export QTSCRIPTS=/usr/lib${LIBDIRSUFFIX}/qt4/plugins/script mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/amarok/amarok.qtscript.optional.diff b/source/kde/amarok/amarok.qtscript.optional.diff deleted file mode 100644 index 1cf3af716..000000000 --- a/source/kde/amarok/amarok.qtscript.optional.diff +++ /dev/null @@ -1,14 +0,0 @@ -diff -up amarok-2.0.90/CMakeLists.txt.qtscript_not_required amarok-2.0.90/CMakeLists.txt ---- amarok-2.0.90/CMakeLists.txt.qtscript_not_required 2009-04-06 16:29:12.000000000 -0500 -+++ amarok-2.0.90/CMakeLists.txt 2009-04-10 13:00:07.000000000 -0500 -@@ -38,8 +38,8 @@ if( WITH_PLAYER ) - - macro_log_feature( KDE4_FOUND "kdelibs" "The toolkit Amarok uses to build" "http://www.kde.org" TRUE "4.2.0" "" ) - -- find_package( QtScriptQtBindings REQUIRED ) -- macro_log_feature( QTSCRIPTQTBINDINGS_FOUND "qtscript-qt" "QtScript Qt Bindings" "http://code.google.com/p/qtscriptgenerator/" TRUE "" "" ) -+ macro_optional_find_package(QtScriptQtBindings) -+ macro_log_feature( QTSCRIPTQTBINDINGS_FOUND "qtscript-qt" "QtScript Qt Bindings" "http://code.google.com/p/qtscriptgenerator/" FALSE "" "" ) - - add_definitions(${QT_DEFINITIONS} ${KDE4_DEFINITIONS}) - diff --git a/source/kde/amarok/local.options b/source/kde/amarok/local.options index 3b7a8b384..b086e127c 100644 --- a/source/kde/amarok/local.options +++ b/source/kde/amarok/local.options @@ -1,3 +1 @@ -VERSION=2.1.1 -BUILD=1 - +VERSION=2.3.0 diff --git a/source/kde/guidance-power-manager/guidance-power-manager.SlackBuild b/source/kde/guidance-power-manager/guidance-power-manager.SlackBuild index afefec2a1..5147c9789 100755 --- a/source/kde/guidance-power-manager/guidance-power-manager.SlackBuild +++ b/source/kde/guidance-power-manager/guidance-power-manager.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # Copyright 2008 Robby Workman, Northport, AL, USA # All rights reserved. # @@ -60,9 +60,9 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX:PATH=/usr \ -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ diff --git a/source/kde/guidance-power-manager/local.options b/source/kde/guidance-power-manager/local.options new file mode 100644 index 000000000..dc6e9bd41 --- /dev/null +++ b/source/kde/guidance-power-manager/local.options @@ -0,0 +1 @@ +VERSION=4.4.0 diff --git a/source/kde/guidance-power-manager/slack-desc b/source/kde/guidance-power-manager/slack-desc index 4e3c196b2..e0c200ccf 100644 --- a/source/kde/guidance-power-manager/slack-desc +++ b/source/kde/guidance-power-manager/slack-desc @@ -6,7 +6,7 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -guidance-power-manager: guidance-power-manager (kde4's power manager daemon) +guidance-power-manager: guidance-power-manager (KDE4 power manager daemon) guidance-power-manager: guidance-power-manager: This is a frontend to HAL's power features for KDE. guidance-power-manager: diff --git a/source/kde/k3b/k3b.SlackBuild b/source/kde/k3b/k3b.SlackBuild index 495edf62e..a32bbc74b 100755 --- a/source/kde/k3b/k3b.SlackBuild +++ b/source/kde/k3b/k3b.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -43,12 +43,11 @@ fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP +rm -rf k3b-$VERSION echo "Building k3b-$VERSION..." tar xvf $CWD/../src/extragear/k3b-$VERSION.tar.?z* cd k3b-$VERSION -zcat $CWD/k3b.internal.libsamplerate.diff.gz | patch -p1 || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -56,17 +55,23 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +mkdir build +cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX=/usr \ -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - . + .. make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +cd - + +# Move the dbus configuration files to the proper place: +mv $PKG/etc/kde/dbus-1 $PKG/etc/ if [ -d $PKG/usr/man ]; then gzip -9 $PKG/usr/man/man?/* @@ -77,10 +82,8 @@ cp -a \ AUTHORS COPYING* FAQ INSTALL KNOWNBUGS PERMISSIONS README RELEASE_HOWTO TODO \ $PKG/usr/doc/k3b-$VERSION -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/kde/k3b/k3b.internal.libsamplerate.diff b/source/kde/k3b/k3b.internal.libsamplerate.diff deleted file mode 100644 index 3c6079598..000000000 --- a/source/kde/k3b/k3b.internal.libsamplerate.diff +++ /dev/null @@ -1,26697 +0,0 @@ -diff -r -u --new-file k3b-r948463/CMakeLists.txt k3b-r948463.patched/CMakeLists.txt ---- k3b-r948463/CMakeLists.txt 2009-04-03 01:16:29.000000000 -0500 -+++ k3b-r948463.patched/CMakeLists.txt 2009-04-03 14:00:42.000000000 -0500 -@@ -61,12 +61,6 @@ - FALSE "1.4.0" "") - endif(K3B_ENABLE_TAGLIB) - --macro_optional_find_package(Samplerate) --macro_log_feature( SAMPLERATE_FOUND "Samplerate" -- "Audio sampling rate conversion." -- "http://www.mega-nerd.com/SRC/" -- TRUE "" "") -- - if(K3B_ENABLE_MUSICBRAINZ) - find_package(MusicBrainz) - macro_log_feature( MUSICBRAINZ_FOUND "Musicbrainz" -@@ -143,10 +137,6 @@ - endif(K3B_BUILD_OGGVORBIS_DECODER_PLUGIN OR K3B_BUILD_OGGVORBIS_ENCODER_PLUGIN) - - --if (WIN32) --find_library(SAMPLERATE_LIBRARIES samplerate-0) --endif(WIN32) -- - ################## K3b build settings ################################# - include(ConfigureChecks.cmake) - -diff -r -u --new-file k3b-r948463/ConfigureChecks.cmake k3b-r948463.patched/ConfigureChecks.cmake ---- k3b-r948463/ConfigureChecks.cmake 2009-04-03 01:16:29.000000000 -0500 -+++ k3b-r948463.patched/ConfigureChecks.cmake 2009-04-03 14:13:45.000000000 -0500 -@@ -9,5 +9,8 @@ - - check_function_exists(stat64 HAVE_STAT64) - -+check_type_size("int" SIZEOF_INT) -+check_type_size("long" SIZEOF_LONG) -+ - check_include_files(sys/vfs.h HAVE_SYS_VFS_H) - check_include_files(sys/statvfs.h HAVE_SYS_STATVFS_H) -diff -r -u --new-file k3b-r948463/cmake/modules/FindSamplerate.cmake k3b-r948463.patched/cmake/modules/FindSamplerate.cmake ---- k3b-r948463/cmake/modules/FindSamplerate.cmake 2009-04-03 01:16:03.000000000 -0500 -+++ k3b-r948463.patched/cmake/modules/FindSamplerate.cmake 2009-04-03 14:00:42.000000000 -0500 -@@ -19,7 +19,7 @@ - FIND_PATH(SAMPLERATE_INCLUDE_DIR NAMES samplerate.h - ) - --FIND_LIBRARY(SAMPLERATE_LIBRARIES NAMES samplerate samplerate-0 -+FIND_LIBRARY(SAMPLERATE_LIBRARIES NAMES samplerate - ) - - include(FindPackageHandleStandardArgs) -diff -r -u --new-file k3b-r948463/libk3b/CMakeLists.txt k3b-r948463.patched/libk3b/CMakeLists.txt ---- k3b-r948463/libk3b/CMakeLists.txt 2009-04-03 01:16:29.000000000 -0500 -+++ k3b-r948463.patched/libk3b/CMakeLists.txt 2009-04-03 14:00:42.000000000 -0500 -@@ -33,6 +33,8 @@ - add_subdirectory( projects ) - add_subdirectory( jobs ) - -+macro_optional_find_package(Samplerate) -+ - set(k3b_jobs_SRCS - jobs/k3bdatatrackreader.cpp - jobs/k3breadcdreader.cpp -@@ -206,6 +208,12 @@ - projects/videodvd/k3bvideodvdimager.cpp - ) - -+set(k3b_samplerate_SRCS -+ plugin/libsamplerate/samplerate.c -+ plugin/libsamplerate/src_sinc.c -+ plugin/libsamplerate/src_zoh.c -+ plugin/libsamplerate/src_linear.c) -+ - - set(k3b_LIB_SRCS - ${k3b_core_SRCS} -@@ -229,6 +237,11 @@ - ) - endif (ENABLE_DVD_RIPPING) - -+if(NOT SAMPLERATE_FOUND) -+ set(k3b_LIB_SRCS ${k3b_LIB_SRCS} ${k3b_samplerate_SRCS}) -+endif(NOT SAMPLERATE_FOUND) -+ -+ - kde4_add_library(k3b SHARED ${k3b_LIB_SRCS}) - - target_link_libraries(k3b -@@ -238,12 +251,16 @@ - ${KDE4_KDE3SUPPORT_LIBS} - ${KDE4_KPTY_LIBS} - ${KCDDB_LIBRARIES} -- ${SAMPLERATE_LIBRARIES} - k3bdevice - ) - if(NOT WIN32) - target_link_libraries(k3b dl) - endif(NOT WIN32) -+ -+if(SAMPLERATE_FOUND) -+ target_link_libraries(k3b ${SAMPLERATE_LIBRARIES}) -+endif(SAMPLERATE_FOUND) -+ - - if(ENABLE_DVD_RIPPING) - target_link_libraries(k3b ${DVDREAD_LIBRARIES}) -diff -r -u --new-file k3b-r948463/libk3b/plugin/k3baudiodecoder.cpp k3b-r948463.patched/libk3b/plugin/k3baudiodecoder.cpp ---- k3b-r948463/libk3b/plugin/k3baudiodecoder.cpp 2009-04-03 01:16:29.000000000 -0500 -+++ k3b-r948463.patched/libk3b/plugin/k3baudiodecoder.cpp 2009-04-03 14:00:42.000000000 -0500 -@@ -26,7 +26,11 @@ - - #include <math.h> - -+#ifdef HAVE_LIBSAMPLERATE - #include <samplerate.h> -+#else -+#include "libsamplerate/samplerate.h" -+#endif - - #if !(HAVE_LRINT && HAVE_LRINTF) - #define lrint(dbl) ((int) (dbl)) -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/common.h k3b-r948463.patched/libk3b/plugin/libsamplerate/common.h ---- k3b-r948463/libk3b/plugin/libsamplerate/common.h 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/common.h 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,105 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+#ifndef COMMON_H_INCLUDED -+#define COMMON_H_INCLUDED -+ -+#ifdef HAVE_STDINT_H -+#include <stdint.h> -+#elif (SIZEOF_INT == 4) -+typedef int int32_t ; -+#elif (SIZEOF_LONG == 4) -+typedef long int32_t ; -+#endif -+ -+#define SRC_MAX_RATIO 12 -+#define SRC_MIN_RATIO_DIFF (1e-20) -+ -+#define MAX(a,b) (((a) > (b)) ? (a) : (b)) -+#define MIN(a,b) (((a) < (b)) ? (a) : (b)) -+ -+#define MAKE_MAGIC(a,b,c,d,e,f) ((a)+((b)<<4)+((c)<<8)+((d)<<12)+((e)<<16)+((f)<<20)) -+ -+#include "samplerate.h" -+ -+enum -+{ SRC_FALSE = 0, -+ SRC_TRUE = 1 -+} ; -+ -+enum -+{ SRC_ERR_NO_ERROR = 0, -+ -+ SRC_ERR_MALLOC_FAILED, -+ SRC_ERR_BAD_STATE, -+ SRC_ERR_BAD_DATA, -+ SRC_ERR_BAD_DATA_PTR, -+ SRC_ERR_NO_PRIVATE, -+ SRC_ERR_BAD_SRC_RATIO, -+ SRC_ERR_BAD_PROC_PTR, -+ SRC_ERR_SHIFT_BITS, -+ SRC_ERR_FILTER_LEN, -+ SRC_ERR_BAD_CONVERTER, -+ SRC_ERR_BAD_CHANNEL_COUNT, -+ SRC_ERR_SINC_BAD_BUFFER_LEN, -+ SRC_ERR_SIZE_INCOMPATIBILITY, -+ SRC_ERR_BAD_PRIV_PTR, -+ SRC_ERR_BAD_SINC_STATE, -+ SRC_ERR_DATA_OVERLAP, -+ -+ /* This must be the last error number. */ -+ SRC_ERR_MAX_ERROR -+} ; -+ -+typedef struct SRC_PRIVATE_tag -+{ double last_ratio, last_position ; -+ -+ void *private_data ; -+ -+ int (*process) (struct SRC_PRIVATE_tag *psrc, SRC_DATA *data) ; -+ void (*reset) (struct SRC_PRIVATE_tag *psrc) ; -+ -+ int error ; -+ int channels ; -+} SRC_PRIVATE ; -+ -+/* In src_sinc.c */ -+int sinc_process (SRC_PRIVATE *psrc, SRC_DATA *data) ; -+ -+const char* sinc_get_name (int src_enum) ; -+const char* sinc_get_description (int src_enum) ; -+ -+int sinc_set_converter (SRC_PRIVATE *psrc, int src_enum) ; -+ -+/* In src_linear.c */ -+int linear_process (SRC_PRIVATE *psrc, SRC_DATA *data) ; -+ -+const char* linear_get_name (int src_enum) ; -+const char* linear_get_description (int src_enum) ; -+ -+int linear_set_converter (SRC_PRIVATE *psrc, int src_enum) ; -+ -+/* In src_zoh.c */ -+int zoh_process (SRC_PRIVATE *psrc, SRC_DATA *data) ; -+ -+const char* zoh_get_name (int src_enum) ; -+const char* zoh_get_description (int src_enum) ; -+ -+int zoh_set_converter (SRC_PRIVATE *psrc, int src_enum) ; -+ -+#endif /* COMMON_H_INCLUDED */ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/fastest_coeffs.h k3b-r948463.patched/libk3b/plugin/libsamplerate/fastest_coeffs.h ---- k3b-r948463/libk3b/plugin/libsamplerate/fastest_coeffs.h 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/fastest_coeffs.h 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,2493 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+ -+/* -+** f = make_filter (8, 128, 100.3) ; -+** Pass band width : 0.0039062 (should be 0.0039062) -+** Stop band atten. : 100.71 dB -+** -3dB band width : 0.484 -+** half length : 2463 -+** increment : 128 -+*/ -+ -+ 8.31472372954840555082e-01, -+ 8.31414005540308198583e-01, -+ 8.31238918266223869580e-01, -+ 8.30947156036480505392e-01, -+ 8.30538793675450581766e-01, -+ 8.30013935904800659316e-01, -+ 8.29372717311066987023e-01, -+ 8.28615302303967515840e-01, -+ 8.27741885065490623496e-01, -+ 8.26752689489751890761e-01, -+ 8.25647969113678215081e-01, -+ 8.24428007038499943704e-01, -+ 8.23093115842108757896e-01, -+ 8.21643637482293187624e-01, -+ 8.20079943190897053817e-01, -+ 8.18402433358933589780e-01, -+ 8.16611537412689103554e-01, -+ 8.14707713680854150873e-01, -+ 8.12691449252757824873e-01, -+ 8.10563259827706050764e-01, -+ 8.08323689555523805517e-01, -+ 8.05973310868314363198e-01, -+ 8.03512724303517833491e-01, -+ 8.00942558318331943035e-01, -+ 7.98263469095534694553e-01, -+ 7.95476140340800830231e-01, -+ 7.92581283071560838138e-01, -+ 7.89579635397499868255e-01, -+ 7.86471962292734527722e-01, -+ 7.83259055359786127148e-01, -+ 7.79941732585400893107e-01, -+ 7.76520838088307852054e-01, -+ 7.72997241859018080490e-01, -+ 7.69371839491718167992e-01, -+ 7.65645551908390675777e-01, -+ 7.61819325075220210586e-01, -+ 7.57894129711408459649e-01, -+ 7.53870960990470018181e-01, -+ 7.49750838234153449413e-01, -+ 7.45534804599028211314e-01, -+ 7.41223926755909090502e-01, -+ 7.36819294562192195208e-01, -+ 7.32322020727209643809e-01, -+ 7.27733240470738174110e-01, -+ 7.23054111174766811487e-01, -+ 7.18285812028632841830e-01, -+ 7.13429543667664534112e-01, -+ 7.08486527805442301009e-01, -+ 7.03458006859804640953e-01, -+ 6.98345243572719653891e-01, -+ 6.93149520624175785599e-01, -+ 6.87872140240182283755e-01, -+ 6.82514423795047564525e-01, -+ 6.77077711408058502407e-01, -+ 6.71563361534684655219e-01, -+ 6.65972750552474845875e-01, -+ 6.60307272341742135247e-01, -+ 6.54568337861228477514e-01, -+ 6.48757374718860524432e-01, -+ 6.42875826737744904271e-01, -+ 6.36925153517562181449e-01, -+ 6.30906829991492501541e-01, -+ 6.24822345978837789815e-01, -+ 6.18673205733470954470e-01, -+ 6.12460927488293727095e-01, -+ 6.06187042995817604307e-01, -+ 5.99853097065060292259e-01, -+ 5.93460647094893878339e-01, -+ 5.87011262603992944875e-01, -+ 5.80506524757569142281e-01, -+ 5.73948025891025337408e-01, -+ 5.67337369030688098981e-01, -+ 5.60676167411809700525e-01, -+ 5.53966043993961543279e-01, -+ 5.47208630974010734604e-01, -+ 5.40405569296826038261e-01, -+ 5.33558508163880174102e-01, -+ 5.26669104539922661168e-01, -+ 5.19739022657876970079e-01, -+ 5.12769933522119303326e-01, -+ 5.05763514410336290084e-01, -+ 4.98721448374081555155e-01, -+ 4.91645423738241937883e-01, -+ 4.84537133599546865348e-01, -+ 4.77398275324308896117e-01, -+ 4.70230550045545592219e-01, -+ 4.63035662159660077464e-01, -+ 4.55815318822846149427e-01, -+ 4.48571229447379538069e-01, -+ 4.41305105197960123586e-01, -+ 4.34018658488283970431e-01, -+ 4.26713602477997000495e-01, -+ 4.19391650570203500248e-01, -+ 4.12054515909689722530e-01, -+ 4.04703910882034223473e-01, -+ 3.97341546613763640927e-01, -+ 3.89969132473721613596e-01, -+ 3.82588375575806771689e-01, -+ 3.75200980283257823356e-01, -+ 3.67808647714624070701e-01, -+ 3.60413075251609871241e-01, -+ 3.53015956048925771960e-01, -+ 3.45618978546330835044e-01, -+ 3.38223825983006376461e-01, -+ 3.30832175914426429575e-01, -+ 3.23445699731881031180e-01, -+ 3.16066062184803764357e-01, -+ 3.08694920906066150312e-01, -+ 3.01333925940378832831e-01, -+ 2.93984719275965256102e-01, -+ 2.86648934379644393378e-01, -+ 2.79328195735489559492e-01, -+ 2.72024118387182545220e-01, -+ 2.64738307484245039003e-01, -+ 2.57472357832259801658e-01, -+ 2.50227853447243409057e-01, -+ 2.43006367114305704691e-01, -+ 2.35809459950733935063e-01, -+ 2.28638680973647728800e-01, -+ 2.21495566672345989279e-01, -+ 2.14381640585498134399e-01, -+ 2.07298412883298144305e-01, -+ 2.00247379954717363848e-01, -+ 1.93230023999986955108e-01, -+ 1.86247812628430653437e-01, -+ 1.79302198461779749294e-01, -+ 1.72394618743085786816e-01, -+ 1.65526494951356295537e-01, -+ 1.58699232422028796430e-01, -+ 1.51914219973401071195e-01, -+ 1.45172829539132269838e-01, -+ 1.38476415806921215879e-01, -+ 1.31826315863480453272e-01, -+ 1.25223848845901208904e-01, -+ 1.18670315599523901184e-01, -+ 1.12166998342411894374e-01, -+ 1.05715160336527447260e-01, -+ 9.93160455657086521652e-02, -+ 9.29708784205405536216e-02, -+ 8.66808633902153846673e-02, -+ 8.04471847614677826321e-02, -+ 7.42710063246745516574e-02, -+ 6.81534710872001986415e-02, -+ 6.20957009940759641076e-02, -+ 5.60987966560835549235e-02, -+ 5.01638370853247708703e-02, -+ 4.42918794383505357026e-02, -+ 3.84839587669171534490e-02, -+ 3.27410877764400740086e-02, -+ 2.70642565922108620236e-02, -+ 2.14544325334371267788e-02, -+ 1.59125598951669576520e-02, -+ 1.04395597381551803740e-02, -+ 5.03632968672305773861e-03, -+-2.96256265336385191805e-04, -+-5.55734794075828358179e-03, -+-1.07461191566687631893e-02, -+-1.58617678942645466689e-02, -+-2.09035164602743607498e-02, -+-2.58706116401622790435e-02, -+-3.07623248430414844568e-02, -+-3.55779522382659724178e-02, -+-4.03168148836769782428e-02, -+-4.49782588454727128013e-02, -+-4.95616553096875425699e-02, -+-5.40664006852556791594e-02, -+-5.84919166986474642345e-02, -+-6.28376504800633867154e-02, -+-6.71030746411782619276e-02, -+-7.12876873444269476554e-02, -+-7.53910123638282386738e-02, -+-7.94125991373483691715e-02, -+-8.33520228108008270906e-02, -+-8.72088842732959695914e-02, -+-9.09828101842390379872e-02, -+-9.46734529918955292072e-02, -+-9.82804909435327500589e-02, -+-1.01803628087157427284e-01, -+-1.05242594264867719844e-01, -+-1.08597145097841310535e-01, -+-1.11867061962988789681e-01, -+-1.15052151961296145188e-01, -+-1.18152247877890054228e-01, -+-1.21167208133862752684e-01, -+-1.24096916729885473063e-01, -+-1.26941283181660202750e-01, -+-1.29700242447243679900e-01, -+-1.32373754846295377252e-01, -+-1.34961805971292009287e-01, -+-1.37464406590764143257e-01, -+-1.39881592544604443917e-01, -+-1.42213424631507739937e-01, -+-1.44459988488595730827e-01, -+-1.46621394463294696386e-01, -+-1.48697777477524800682e-01, -+-1.50689296884269657850e-01, -+-1.52596136316595465399e-01, -+-1.54418503529190731527e-01, -+-1.56156630232500315270e-01, -+-1.57810771919529219121e-01, -+-1.59381207685401427021e-01, -+-1.60868240039743037872e-01, -+-1.62272194711985145998e-01, -+-1.63593420449666626659e-01, -+-1.64832288809824062392e-01, -+-1.65989193943563151379e-01, -+-1.67064552373901109572e-01, -+-1.68058802766975601273e-01, -+-1.68972405696717037360e-01, -+-1.69805843403086798027e-01, -+-1.70559619543971530131e-01, -+-1.71234258940853617537e-01, -+-1.71830307318344255307e-01, -+-1.72348331037702334756e-01, -+-1.72788916824434257702e-01, -+-1.73152671490098081231e-01, -+-1.73440221648409775845e-01, -+-1.73652213425782242506e-01, -+-1.73789312166397952319e-01, -+-1.73852202131942051855e-01, -+-1.73841586196111674845e-01, -+-1.73758185534021086793e-01, -+-1.73602739306629005878e-01, -+-1.73376004340306061335e-01, -+-1.73078754801670009478e-01, -+-1.72711781867818603420e-01, -+-1.72275893392080048372e-01, -+-1.71771913565416961545e-01, -+-1.71200682573611373538e-01, -+-1.70563056250360139954e-01, -+-1.69859905726417126370e-01, -+-1.69092117074913228514e-01, -+-1.68260590952989147473e-01, -+-1.67366242239875284703e-01, -+-1.66409999671557895518e-01, -+-1.65392805472166642966e-01, -+-1.64315614982222552021e-01, -+-1.63179396283883837437e-01, -+-1.61985129823331186483e-01, -+-1.60733808030429803360e-01, -+-1.59426434935813571281e-01, -+-1.58064025785527417778e-01, -+-1.56647606653372045704e-01, -+-1.55178214051094831571e-01, -+-1.53656894536566474008e-01, -+-1.52084704320088470730e-01, -+-1.50462708868975059140e-01, -+-1.48791982510548842500e-01, -+-1.47073608033699704256e-01, -+-1.45308676289147314931e-01, -+-1.43498285788550977715e-01, -+-1.41643542302611558092e-01, -+-1.39745558458309881988e-01, -+-1.37805453335422323224e-01, -+-1.35824352062461073398e-01, -+-1.33803385412180564362e-01, -+-1.31743689396791985313e-01, -+-1.29646404863030306753e-01, -+-1.27512677087215337002e-01, -+-1.25343655370452389253e-01, -+-1.23140492634104758984e-01, -+-1.20904345015691472298e-01, -+-1.18636371465341922127e-01, -+-1.16337733342949820048e-01, -+-1.14009594016166518338e-01, -+-1.11653118459372716065e-01, -+-1.09269472853762789066e-01, -+-1.06859824188683741331e-01, -+-1.04425339864360325337e-01, -+-1.01967187296145456177e-01, -+-9.94865335204263567803e-02, -+-9.69845448023236023083e-02, -+-9.44623862453117940641e-02, -+-9.19212214028948121358e-02, -+-8.93622118924671249296e-02, -+-8.67865170114848205607e-02, -+-8.41952933560805999447e-02, -+-8.15896944422443981537e-02, -+-7.89708703296961439522e-02, -+-7.63399672485739477779e-02, -+-7.36981272290610500697e-02, -+-7.10464877340710454501e-02, -+-6.83861812951113146042e-02, -+-6.57183351514422919859e-02, -+-6.30440708926501142129e-02, -+-6.03645041047437408421e-02, -+-5.76807440198948140342e-02, -+-5.49938931699267691267e-02, -+-5.23050470436661057994e-02, -+-4.96152937482609926456e-02, -+-4.69257136745778041798e-02, -+-4.42373791667729082677e-02, -+-4.15513541961495605492e-02, -+-3.88686940393953503370e-02, -+-3.61904449613011935938e-02, -+-3.35176439020573244121e-02, -+-3.08513181692228674602e-02, -+-2.81924851344595717162e-02, -+-2.55421519351213023585e-02, -+-2.29013151807887539724e-02, -+-2.02709606648342685609e-02, -+-1.76520630811025022733e-02, -+-1.50455857457888787787e-02, -+-1.24524803245954687053e-02, -+-9.87368656524285036313e-03, -+-7.31013203541311037958e-03, -+-4.76273186619807602227e-03, -+-2.23238850112297869746e-03, -+ 2.80008549183706099625e-04, -+ 2.77358294660976899965e-03, -+ 5.24747175940274562800e-03, -+ 7.70082569017439908660e-03, -+ 1.01328092980087648006e-02, -+ 1.25426012146140665460e-02, -+ 1.49293943544662570388e-02, -+ 1.72923961188884665885e-02, -+ 1.96308285940195309527e-02, -+ 2.19439287426209730936e-02, -+ 2.42309485896793734561e-02, -+ 2.64911554017603391442e-02, -+ 2.87238318600733545660e-02, -+ 3.09282762272103349532e-02, -+ 3.31038025075217068327e-02, -+ 3.52497406010981520486e-02, -+ 3.73654364513253609004e-02, -+ 3.94502521859858221176e-02, -+ 4.15035662518817155542e-02, -+ 4.35247735429537541130e-02, -+ 4.55132855218787699125e-02, -+ 4.74685303351244439196e-02, -+ 4.93899529214478216765e-02, -+ 5.12770151138242716304e-02, -+ 5.31291957347935772660e-02, -+ 5.49459906852194576721e-02, -+ 5.67269130264521220797e-02, -+ 5.84714930558940249039e-02, -+ 6.01792783759655322551e-02, -+ 6.18498339564735599705e-02, -+ 6.34827421903864652641e-02, -+ 6.50776029430226859995e-02, -+ 6.66340335946605799577e-02, -+ 6.81516690765814614483e-02, -+ 6.96301619005592065115e-02, -+ 7.10691821818139612965e-02, -+ 7.24684176554465098175e-02, -+ 7.38275736863740761340e-02, -+ 7.51463732727930683319e-02, -+ 7.64245570431912463194e-02, -+ 7.76618832469397474272e-02, -+ 7.88581277384926976337e-02, -+ 8.00130839552289779837e-02, -+ 8.11265628889681067459e-02, -+ 8.21983930512013155623e-02, -+ 8.32284204320703352442e-02, -+ 8.42165084531432683868e-02, -+ 8.51625379140240473808e-02, -+ 8.60664069328434949702e-02, -+ 8.69280308806818224898e-02, -+ 8.77473423099686122839e-02, -+ 8.85242908769151987114e-02, -+ 8.92588432580306151420e-02, -+ 8.99509830607803234637e-02, -+ 9.06007107284422380511e-02, -+ 9.12080434392217309636e-02, -+ 9.17730149996878741270e-02, -+ 9.22956757325926607782e-02, -+ 9.27760923591415126443e-02, -+ 9.32143478757788968014e-02, -+ 9.36105414255621187669e-02, -+ 9.39647881641913207407e-02, -+ 9.42772191207702781046e-02, -+ 9.45479810533706027664e-02, -+ 9.47772362994778183598e-02, -+ 9.49651626213951355338e-02, -+ 9.51119530466846413441e-02, -+ 9.52178157037280176178e-02, -+ 9.52829736524876819148e-02, -+ 9.53076647105531166160e-02, -+ 9.52921412745576373871e-02, -+ 9.52366701370536278271e-02, -+ 9.51415322989309503177e-02, -+ 9.50070227774735681647e-02, -+ 9.48334504101390751707e-02, -+ 9.46211376541590265532e-02, -+ 9.43704203820504156086e-02, -+ 9.40816476731309581094e-02, -+ 9.37551816011396865758e-02, -+ 9.33913970180541563870e-02, -+ 9.29906813342047527948e-02, -+ 9.25534342947849225647e-02, -+ 9.20800677528557931506e-02, -+ 9.15710054389489019888e-02, -+ 9.10266827273659706599e-02, -+ 9.04475463992783224043e-02, -+ 8.98340544027328158361e-02, -+ 8.91866756096650198371e-02, -+ 8.85058895700238101867e-02, -+ 8.77921862631190763615e-02, -+ 8.70460658462897246546e-02, -+ 8.62680384010083983748e-02, -+ 8.54586236765221690659e-02, -+ 8.46183508311429133375e-02, -+ 8.37477581712920277068e-02, -+ 8.28473928884114751980e-02, -+ 8.19178107938471483651e-02, -+ 8.09595760518180135312e-02, -+ 7.99732609105757996648e-02, -+ 7.89594454318716387764e-02, -+ 7.79187172188340326784e-02, -+ 7.68516711423724852015e-02, -+ 7.57589090662164482692e-02, -+ 7.46410395707000073884e-02, -+ 7.34986776754032733461e-02, -+ 7.23324445607601979047e-02, -+ 7.11429672887474440213e-02, -+ 6.99308785227581580779e-02, -+ 6.86968162467783832748e-02, -+ 6.74414234839716131287e-02, -+ 6.61653480147834510694e-02, -+ 6.48692420946761771905e-02, -+ 6.35537621716019962559e-02, -+ 6.22195686033254202751e-02, -+ 6.08673253747022482973e-02, -+ 5.94976998150253330588e-02, -+ 5.81113623155428762890e-02, -+ 5.67089860472591994478e-02, -+ 5.52912466791220663653e-02, -+ 5.38588220967053943333e-02, -+ 5.24123921214928872869e-02, -+ 5.09526382308646275110e-02, -+ 4.94802432788957607945e-02, -+ 4.79958912180662375380e-02, -+ 4.65002668219884549017e-02, -+ 4.49940554092515265783e-02, -+ 4.34779425684853407241e-02, -+ 4.19526138847447563340e-02, -+ 4.04187546673120054463e-02, -+ 3.88770496790168534895e-02, -+ 3.73281828671714888124e-02, -+ 3.57728370962169389680e-02, -+ 3.42116938821758476141e-02, -+ 3.26454331290065291604e-02, -+ 3.10747328669506231447e-02, -+ 2.95002689929673225788e-02, -+ 2.79227150133440210622e-02, -+ 2.63427417885741359249e-02, -+ 2.47610172805882329528e-02, -+ 2.31782063024293799591e-02, -+ 2.15949702704538760989e-02, -+ 2.00119669591453143431e-02, -+ 1.84298502586232419709e-02, -+ 1.68492699349288496680e-02, -+ 1.52708713931675090641e-02, -+ 1.36952954435869880129e-02, -+ 1.21231780706691841254e-02, -+ 1.05551502053105091677e-02, -+ 8.99183750016553651196e-03, -+ 7.43386010822696258193e-03, -+ 5.88183246471273707412e-03, -+ 4.33636307232945251988e-03, -+ 2.79805428998205086427e-03, -+ 1.26750212499337003291e-03, -+-2.54703971099550386531e-04, -+-1.76798130311027175757e-03, -+-3.27175412906725469539e-03, -+-4.76545385331804925710e-03, -+-6.24851921581533794464e-03, -+-7.72039647752874400727e-03, -+-9.18053960192777122884e-03, -+-1.06284104324833178490e-02, -+-1.20634788661366718077e-02, -+-1.34852230226875247771e-02, -+-1.48931294100519973078e-02, -+-1.62866930853476296615e-02, -+-1.76654178117594401476e-02, -+-1.90288162111466874205e-02, -+-2.03764099123495759369e-02, -+-2.17077296951579609696e-02, -+-2.30223156299061669505e-02, -+-2.43197172126588360974e-02, -+-2.55994934959561624976e-02, -+-2.68612132150869431513e-02, -+-2.81044549098614510063e-02, -+-2.93288070418574950415e-02, -+-3.05338681071131295974e-02, -+-3.17192467442452205595e-02, -+-3.28845618379712614776e-02, -+-3.40294426180154721551e-02, -+-3.51535287533818185945e-02, -+-3.62564704419792716017e-02, -+-3.73379284955845242022e-02, -+-3.83975744201309962533e-02, -+-3.94350904913155775322e-02, -+-4.04501698255130062720e-02, -+-4.14425164459938585870e-02, -+-4.24118453444415760556e-02, -+-4.33578825377650758921e-02, -+-4.42803651202084772032e-02, -+-4.51790413107587551789e-02, -+-4.60536704958539877541e-02, -+-4.69040232673985507672e-02, -+-4.77298814560914094751e-02, -+-4.85310381600771723054e-02, -+-4.93072977689298017068e-02, -+-5.00584759829825892696e-02, -+-5.07843998280173986037e-02, -+-5.14849076653303427964e-02, -+-5.21598491971914657306e-02, -+-5.28090854677170859488e-02, -+-5.34324888591782357072e-02, -+-5.40299430837655400572e-02, -+-5.46013431708381041796e-02, -+-5.51465954496810906171e-02, -+-5.56656175277993395256e-02, -+-5.61583382647804357779e-02, -+-5.66246977417538960298e-02, -+-5.70646472264832865795e-02, -+-5.74781491341238848225e-02, -+-5.78651769836829588112e-02, -+-5.82257153502198851469e-02, -+-5.85597598128258789441e-02, -+-5.88673168984241990120e-02, -+-5.91484040214318093631e-02, -+-5.94030494193287308957e-02, -+-5.96312920841784027681e-02, -+-5.98331816901454746627e-02, -+-6.00087785170606569096e-02, -+-6.01581533700810480725e-02, -+-6.02813874954959694197e-02, -+-6.03785724927326447609e-02, -+-6.04498102226119424230e-02, -+-6.04952127119116611631e-02, -+-6.05149020542914278797e-02, -+-6.05090103076376881197e-02, -+-6.04776793878847099273e-02, -+-6.04210609593744951695e-02, -+-6.03393163218124903291e-02, -+-6.02326162938837256222e-02, -+-6.01011410935896536745e-02, -+-5.99450802153716350018e-02, -+-5.97646323040843391317e-02, -+-5.95600050258849322837e-02, -+-5.93314149361059764431e-02, -+-5.90790873441773764507e-02, -+-5.88032561756684640786e-02, -+-5.85041638315173181950e-02, -+-5.81820610445198463379e-02, -+-5.78372067331465664064e-02, -+-5.74698678527617162759e-02, -+-5.70803192443151696800e-02, -+-5.66688434805820984153e-02, -+-5.62357307100216502471e-02, -+-5.57812784983319834287e-02, -+-5.53057916677746758127e-02, -+-5.48095821343453915020e-02, -+-5.42929687428649263015e-02, -+-5.37562771000702349644e-02, -+-5.31998394057807341695e-02, -+-5.26239942822169029513e-02, -+-5.20290866015511582754e-02, -+-5.14154673117670768523e-02, -+-5.07834932609073572141e-02, -+-5.01335270197884388943e-02, -+-4.94659367032617980353e-02, -+-4.87810957901005926018e-02, -+-4.80793829415919610204e-02, -+-4.73611818189140221236e-02, -+-4.66268808993793651418e-02, -+-4.58768732916221277929e-02, -+-4.51115565498113532672e-02, -+-4.43313324869706107401e-02, -+-4.35366069874822472774e-02, -+-4.27277898188581847783e-02, -+-4.19052944428566706558e-02, -+-4.10695378260253277092e-02, -+-4.02209402497498702544e-02, -+-3.93599251198885058400e-02, -+-3.84869187760717781921e-02, -+-3.76023503007467674308e-02, -+-3.67066513280452297319e-02, -+-3.58002558525536487832e-02, -+-3.48836000380640318119e-02, -+-3.39571220263849699039e-02, -+-3.30212617462878818553e-02, -+-3.20764607226682249563e-02, -+-3.11231618859974003277e-02, -+-3.01618093821427596390e-02, -+-2.91928483826300218251e-02, -+-2.82167248954252464221e-02, -+-2.72338855763107207109e-02, -+-2.62447775409285488646e-02, -+-2.52498481775659533444e-02, -+-2.42495449607560524530e-02, -+-2.32443152657647901516e-02, -+-2.22346061840382018537e-02, -+-2.12208643396787077773e-02, -+-2.02035357070221716080e-02, -+-1.91830654293842946256e-02, -+-1.81598976390459701524e-02, -+-1.71344752785447841659e-02, -+-1.61072399233397958729e-02, -+-1.50786316059164128556e-02, -+-1.40490886413957953571e-02, -+-1.30190474547137412242e-02, -+-1.19889424094323342185e-02, -+-1.09592056382471266657e-02, -+-9.93026687525074697183e-03, -+-8.90255329001433948211e-03, -+-7.87648932354562125724e-03, -+-6.85249652618241146540e-03, -+-5.83099339747908569642e-03, -+-4.81239522814202146106e-03, -+-3.79711394406930576734e-03, -+-2.78555795254968683455e-03, -+-1.77813199067227692071e-03, -+-7.75236976000132386663e-04, -+ 2.22730140442126654798e-04, -+ 1.21537651881706244492e-03, -+ 2.20231357271108733539e-03, -+ 3.18315710891246220898e-03, -+ 4.15752746468348553799e-03, -+ 5.12504964248380791986e-03, -+ 6.08535344210042478813e-03, -+ 7.03807359014245199208e-03, -+ 7.98284986685961206465e-03, -+ 8.91932723024580452476e-03, -+ 9.84715593738785290034e-03, -+ 1.07659916630240357766e-02, -+ 1.16754956152756248638e-02, -+ 1.25753346485176220604e-02, -+ 1.34651813733560731662e-02, -+ 1.43447142636787781933e-02, -+ 1.52136177607511777904e-02, -+ 1.60715823743268690360e-02, -+ 1.69183047807457617728e-02, -+ 1.77534879179936204430e-02, -+ 1.85768410776981605925e-02, -+ 1.93880799940382604618e-02, -+ 2.01869269295435888045e-02, -+ 2.09731107577651766649e-02, -+ 2.17463670427963037812e-02, -+ 2.25064381156266125894e-02, -+ 2.32530731473125917841e-02, -+ 2.39860282189490944815e-02, -+ 2.47050663884288181082e-02, -+ 2.54099577539762186418e-02, -+ 2.61004795144461655687e-02, -+ 2.67764160263764816605e-02, -+ 2.74375588577874841845e-02, -+ 2.80837068387202806741e-02, -+ 2.87146661085097808230e-02, -+ 2.93302501597869115513e-02, -+ 2.99302798792087168533e-02, -+ 3.05145835849139068774e-02, -+ 3.10829970607048658437e-02, -+ 3.16353635869560598226e-02, -+ 3.21715339682534032240e-02, -+ 3.26913665577675052742e-02, -+ 3.31947272783659833029e-02, -+ 3.36814896404726560331e-02, -+ 3.41515347566807569990e-02, -+ 3.46047513531298478462e-02, -+ 3.50410357776568884280e-02, -+ 3.54602920047340924858e-02, -+ 3.58624316372060172875e-02, -+ 3.62473739048404727803e-02, -+ 3.66150456597097023748e-02, -+ 3.69653813684179058385e-02, -+ 3.72983231011940682964e-02, -+ 3.76138205178691634178e-02, -+ 3.79118308507581658340e-02, -+ 3.81923188844700278732e-02, -+ 3.84552569326661666804e-02, -+ 3.87006248117945095277e-02, -+ 3.89284098118221136287e-02, -+ 3.91386066639944005252e-02, -+ 3.93312175056476295842e-02, -+ 3.95062518421033306848e-02, -+ 3.96637265056755394799e-02, -+ 3.98036656118202977761e-02, -+ 3.99261005124597820326e-02, -+ 4.00310697465144360585e-02, -+ 4.01186189876763035778e-02, -+ 4.01888009894591641258e-02, -+ 4.02416755275608953313e-02, -+ 4.02773093395744422041e-02, -+ 4.02957760620868618573e-02, -+ 4.02971561652026855072e-02, -+ 4.02815368845340013304e-02, -+ 4.02490121506946865737e-02, -+ 4.01996825163432602857e-02, -+ 4.01336550808131173329e-02, -+ 4.00510434123766412284e-02, -+ 3.99519674681838021790e-02, -+ 3.98365535119223901361e-02, -+ 3.97049340292425986809e-02, -+ 3.95572476409943238340e-02, -+ 3.93936390143226622396e-02, -+ 3.92142587716682866628e-02, -+ 3.90192633977227906761e-02, -+ 3.88088151443859719070e-02, -+ 3.85830819337740632546e-02, -+ 3.83422372593309676581e-02, -+ 3.80864600850902706997e-02, -+ 3.78159347431409609275e-02, -+ 3.75308508293468318096e-02, -+ 3.72314030973733209318e-02, -+ 3.69177913510723085255e-02, -+ 3.65902203352790472701e-02, -+ 3.62488996250740352911e-02, -+ 3.58940435135636018438e-02, -+ 3.55258708982338911042e-02, -+ 3.51446051659309519066e-02, -+ 3.47504740765239503175e-02, -+ 3.43437096453047957523e-02, -+ 3.39245480241803926136e-02, -+ 3.34932293817127510471e-02, -+ 3.30499977820627663383e-02, -+ 3.25951010628938789293e-02, -+ 3.21287907122915217251e-02, -+ 3.16513217447548164674e-02, -+ 3.11629525763171093267e-02, -+ 3.06639448988514501382e-02, -+ 3.01545635536184866710e-02, -+ 2.96350764041116987446e-02, -+ 2.91057542082603579181e-02, -+ 2.85668704900414009706e-02, -+ 2.80187014105628129368e-02, -+ 2.74615256386703497637e-02, -+ 2.68956242211381771345e-02, -+ 2.63212804524964143205e-02, -+ 2.57387797445546746833e-02, -+ 2.51484094956766456030e-02, -+ 2.45504589598617914414e-02, -+ 2.39452191156906725455e-02, -+ 2.33329825351894608321e-02, -+ 2.27140432526683408443e-02, -+ 2.20886966335908999093e-02, -+ 2.14572392435271874778e-02, -+ 2.08199687172471933905e-02, -+ 2.01771836280079629178e-02, -+ 1.95291833570884962312e-02, -+ 1.88762679636269269101e-02, -+ 1.82187380548123403767e-02, -+ 1.75568946564845403124e-02, -+ 1.68910390841945853846e-02, -+ 1.62214728147774996103e-02, -+ 1.55484973584896369464e-02, -+ 1.48724141317607399387e-02, -+ 1.41935243306124080076e-02, -+ 1.35121288047925294795e-02, -+ 1.28285279326754275003e-02, -+ 1.21430214969758445281e-02, -+ 1.14559085613274869858e-02, -+ 1.07674873477713456404e-02, -+ 1.00780551152029641815e-02, -+ 9.38790803882408146641e-03, -+ 8.69734109064560119429e-03, -+ 8.00664792108640895052e-03, -+ 7.31612074171312902482e-03, -+ 6.62605020916498532735e-03, -+ 5.93672531030635993593e-03, -+ 5.24843324865020312286e-03, -+ 4.56145933209378684481e-03, -+ 3.87608686200798923521e-03, -+ 3.19259702372048361982e-03, -+ 2.51126877843176705626e-03, -+ 1.83237875660391988202e-03, -+ 1.15620115285868549186e-03, -+ 4.83007622422852007059e-04, -+-1.86932820843070034112e-04, -+-8.53353904797455329115e-04, -+-1.51599219771675255281e-03, -+-2.17458720530792556924e-03, -+-2.82888146600037857989e-03, -+-3.47862064448672828401e-03, -+-4.12355362347965707925e-03, -+-4.76343259365718217635e-03, -+-5.39801314176371720144e-03, -+-6.02705433684159932323e-03, -+-6.65031881456398799024e-03, -+-7.26757285964317947813e-03, -+-7.87858648628854928153e-03, -+-8.48313351669007821576e-03, -+-9.08099165750268083608e-03, -+-9.67194257431004678072e-03, -+-1.02557719640449674509e-02, -+-1.08322696253466653482e-02, -+-1.14012295268339416271e-02, -+-1.19624498732761111452e-02, -+-1.25157331696445651287e-02, -+-1.30608862830260651078e-02, -+-1.35977205023845738180e-02, -+-1.41260515961539080687e-02, -+-1.46456998676501564532e-02, -+-1.51564902082884610246e-02, -+-1.56582521485937077588e-02, -+-1.61508199069943896020e-02, -+-1.66340324363880263936e-02, -+-1.71077334684716746149e-02, -+-1.75717715558275228149e-02, -+-1.80260001117568194329e-02, -+-1.84702774478586080609e-02, -+-1.89044668093441003975e-02, -+-1.93284364080869922042e-02, -+-1.97420594534034529732e-02, -+-2.01452141805614354242e-02, -+-2.05377838770183090977e-02, -+-2.09196569063852221004e-02, -+-2.12907267301215390176e-02, -+-2.16508919269584217127e-02, -+-2.20000562100566773860e-02, -+-2.23381284419012192399e-02, -+-2.26650226469371808558e-02, -+-2.29806580219539050014e-02, -+-2.32849589442222955349e-02, -+-2.35778549773940013234e-02, -+-2.38592808751701725145e-02, -+-2.41291765827496146324e-02, -+-2.43874872360661625048e-02, -+-2.46341631588262027774e-02, -+-2.48691598573592027865e-02, -+-2.50924380132932847709e-02, -+-2.53039634740697960691e-02, -+-2.55037072413113186098e-02, -+-2.56916454570593408291e-02, -+-2.58677593878966008423e-02, -+-2.60320354069717534162e-02, -+-2.61844649739453247395e-02, -+-2.63250446128731642459e-02, -+-2.64537758880496950975e-02, -+-2.65706653778289558776e-02, -+-2.66757246464459155111e-02, -+-2.67689702138592805492e-02, -+-2.68504235236379437679e-02, -+-2.69201109089152179621e-02, -+-2.69780635564342181898e-02, -+-2.70243174687087896191e-02, -+-2.70589134243261995871e-02, -+-2.70818969364167577707e-02, -+-2.70933182093176481986e-02, -+-2.70932320934577017257e-02, -+-2.70816980384915410862e-02, -+-2.70587800447114543156e-02, -+-2.70245466127663376554e-02, -+-2.69790706917171427270e-02, -+-2.69224296254590607369e-02, -+-2.68547050975419879237e-02, -+-2.67759830744198866481e-02, -+-2.66863537471611969587e-02, -+-2.65859114716531889921e-02, -+-2.64747547073322930800e-02, -+-2.63529859544745573285e-02, -+-2.62207116900796607939e-02, -+-2.60780423023825730366e-02, -+-2.59250920240284947471e-02, -+-2.57619788639449828760e-02, -+-2.55888245379471308827e-02, -+-2.54057543981124761556e-02, -+-2.52128973609604678519e-02, -+-2.50103858344739478359e-02, -+-2.47983556439997539222e-02, -+-2.45769459570643403201e-02, -+-2.43462992071435090080e-02, -+-2.41065610164222128564e-02, -+-2.38578801175844575078e-02, -+-2.36004082746693114037e-02, -+-2.33343002030331689300e-02, -+-2.30597134884559483436e-02, -+-2.27768085054302904524e-02, -+-2.24857483346725776918e-02, -+-2.21866986798954189675e-02, -+-2.18798277838799307138e-02, -+-2.15653063438876642366e-02, -+-2.12433074264517691987e-02, -+-2.09140063815867055519e-02, -+-2.05775807564556566243e-02, -+-2.02342102085360346642e-02, -+-1.98840764183222142025e-02, -+-1.95273630016047500257e-02, -+-1.91642554213670816832e-02, -+-1.87949408993371563925e-02, -+-1.84196083272362247374e-02, -+-1.80384481777610752862e-02, -+-1.76516524153425696797e-02, -+-1.72594144067167720724e-02, -+-1.68619288313498413845e-02, -+-1.64593915917550098760e-02, -+-1.60519997237402040069e-02, -+-1.56399513066264282679e-02, -+-1.52234453734734331148e-02, -+-1.48026818213531103502e-02, -+-1.43778613217079923037e-02, -+-1.39491852308316760523e-02, -+-1.35168555005115483686e-02, -+-1.30810745888681710658e-02, -+-1.26420453714316226301e-02, -+-1.21999710524887047813e-02, -+-1.17550550767402828961e-02, -+-1.13075010413035727252e-02, -+-1.08575126080952908542e-02, -+-1.04052934166326063736e-02, -+-9.95104699728536351566e-03, -+-9.49497668501652312967e-03, -+-9.03728553364356763933e-03, -+-8.57817623065582068875e-03, -+-8.11785101262214349449e-03, -+-7.65651158122056946231e-03, -+-7.19435901992488725798e-03, -+-6.73159371137851351291e-03, -+-6.26841525548942068990e-03, -+-5.80502238827697216589e-03, -+-5.34161290150089295564e-03, -+-4.87838356310490647849e-03, -+-4.41553003850264462471e-03, -+-3.95324681273798422126e-03, -+-3.49172711354636287548e-03, -+-3.03116283534747218975e-03, -+-2.57174446419663202748e-03, -+-2.11366100372138449731e-03, -+-1.65709990207213789248e-03, -+-1.20224697991074881177e-03, -+-7.49286359465203312402e-04, -+-2.98400394673150758020e-04, -+ 1.50230397559290287587e-04, -+ 5.96427404960260163468e-04, -+ 1.04001398633389997676e-03, -+ 1.48081553681653948010e-03, -+ 1.91865955192711671630e-03, -+ 2.35337569038958404136e-03, -+ 2.78479583570576333731e-03, -+ 3.21275415646031688166e-03, -+ 3.63708716533605539573e-03, -+ 4.05763377682291995208e-03, -+ 4.47423536360066955581e-03, -+ 4.88673581157838838457e-03, -+ 5.29498157357465894235e-03, -+ 5.69882172162047926506e-03, -+ 6.09810799787139853900e-03, -+ 6.49269486411187517899e-03, -+ 6.88243954983998491859e-03, -+ 7.26720209891677272618e-03, -+ 7.64684541476874993227e-03, -+ 8.02123530413159993580e-03, -+ 8.39024051932213063565e-03, -+ 8.75373279902990839019e-03, -+ 9.11158690761618844656e-03, -+ 9.46368067291306243327e-03, -+ 9.80989502251233651264e-03, -+ 1.01501140185368699670e-02, -+ 1.04842248908878447194e-02, -+ 1.08121180689596009528e-02, -+ 1.11336872118183785596e-02, -+ 1.14488292368375710328e-02, -+ 1.17574443467867335855e-02, -+ 1.20594360553697797084e-02, -+ 1.23547112112087492664e-02, -+ 1.26431800202723137322e-02, -+ 1.29247560667452802280e-02, -+ 1.31993563323394361153e-02, -+ 1.34669012140451026943e-02, -+ 1.37273145403230718842e-02, -+ 1.39805235857388930609e-02, -+ 1.42264590840399576116e-02, -+ 1.44650552396788801418e-02, -+ 1.46962497377853603536e-02, -+ 1.49199837525900817770e-02, -+ 1.51362019543059365262e-02, -+ 1.53448525144697818512e-02, -+ 1.55458871097522988158e-02, -+ 1.57392609242401407266e-02, -+ 1.59249326501989980909e-02, -+ 1.61028644873237487822e-02, -+ 1.62730221404839558996e-02, -+ 1.64353748159745995105e-02, -+ 1.65898952162792344411e-02, -+ 1.67365595333573702330e-02, -+ 1.68753474404654685292e-02, -+ 1.70062420825228405308e-02, -+ 1.71292300650343690127e-02, -+ 1.72443014415816948948e-02, -+ 1.73514496998961910423e-02, -+ 1.74506717465267233158e-02, -+ 1.75419678901157470585e-02, -+ 1.76253418232991503067e-02, -+ 1.77008006032431768062e-02, -+ 1.77683546308354950449e-02, -+ 1.78280176285450023266e-02, -+ 1.78798066169677284665e-02, -+ 1.79237418900749095885e-02, -+ 1.79598469891815541721e-02, -+ 1.79881486756524357207e-02, -+ 1.80086769023645003329e-02, -+ 1.80214647839439801036e-02, -+ 1.80265485657978320744e-02, -+ 1.80239675919585257136e-02, -+ 1.80137642717629609113e-02, -+ 1.79959840453853894826e-02, -+ 1.79706753482452019632e-02, -+ 1.79378895743111561878e-02, -+ 1.78976810383233188306e-02, -+ 1.78501069369546815080e-02, -+ 1.77952273089348571300e-02, -+ 1.77331049941585293384e-02, -+ 1.76638055918014250101e-02, -+ 1.75873974174670689996e-02, -+ 1.75039514593883366311e-02, -+ 1.74135413337067820883e-02, -+ 1.73162432388551425222e-02, -+ 1.72121359090659648006e-02, -+ 1.71013005670323306462e-02, -+ 1.69838208757447130248e-02, -+ 1.68597828895295613616e-02, -+ 1.67292750043147309125e-02, -+ 1.65923879071472879509e-02, -+ 1.64492145249898746862e-02, -+ 1.62998499728209574056e-02, -+ 1.61443915010654574782e-02, -+ 1.59829384423819872985e-02, -+ 1.58155921578329479449e-02, -+ 1.56424559824643004402e-02, -+ 1.54636351703211580993e-02, -+ 1.52792368389266484952e-02, -+ 1.50893699132506348831e-02, -+ 1.48941450691946284529e-02, -+ 1.46936746766213478105e-02, -+ 1.44880727419542387757e-02, -+ 1.42774548503756936596e-02, -+ 1.40619381076500047506e-02, -+ 1.38416410815988405458e-02, -+ 1.36166837432563775367e-02, -+ 1.33871874077307433104e-02, -+ 1.31532746747999255282e-02, -+ 1.29150693692685249875e-02, -+ 1.26726964811125480254e-02, -+ 1.24262821054400597609e-02, -+ 1.21759533822933443264e-02, -+ 1.19218384363212748234e-02, -+ 1.16640663163469111840e-02, -+ 1.14027669348586990772e-02, -+ 1.11380710074510391738e-02, -+ 1.08701099922405512027e-02, -+ 1.05990160292857588803e-02, -+ 1.03249218800347264402e-02, -+ 1.00479608668283364181e-02, -+ 9.76826681248407595326e-03, -+ 9.48597397998680001707e-03, -+ 9.20121701231205180171e-03, -+ 8.91413087240663405686e-03, -+ 8.62485078335300560382e-03, -+ 8.33351216874106057175e-03, -+ 8.04025059327335284154e-03, -+ 7.74520170362733365033e-03, -+ 7.44850116959968472363e-03, -+ 7.15028462555652392224e-03, -+ 6.85068761221313375642e-03, -+ 6.54984551876693164157e-03, -+ 6.24789352540736173808e-03, -+ 5.94496654622468298501e-03, -+ 5.64119917254172174859e-03, -+ 5.33672561668945780872e-03, -+ 5.03167965625017643561e-03, -+ 4.72619457878821046942e-03, -+ 4.42040312709122713147e-03, -+ 4.11443744494245557813e-03, -+ 3.80842902344421868274e-03, -+ 3.50250864791438413365e-03, -+ 3.19680634537424174582e-03, -+ 2.89145133264915015631e-03, -+ 2.58657196509964968506e-03, -+ 2.28229568600325869593e-03, -+ 1.97874897660506266980e-03, -+ 1.67605730685465247574e-03, -+ 1.37434508684857771554e-03, -+ 1.07373561899400072825e-03, -+ 7.74351050912206037222e-04, -+ 4.76312329096932108620e-04, -+ 1.79739153344913828647e-04, -+-1.15250068026150436743e-04, -+-4.08538262157430215240e-04, -+-7.00009734810518881830e-04, -+-9.89550212697529359140e-04, -+-1.27704688496522110984e-03, -+-1.56238844381914230262e-03, -+-1.84546512427596291067e-03, -+-2.12616874302977649017e-03, -+-2.40439273642179809562e-03, -+-2.68003219750039467159e-03, -+-2.95298391216083011210e-03, -+-3.22314639435426720723e-03, -+-3.49041992035452591087e-03, -+-3.75470656207426648626e-03, -+-4.01591021941965966441e-03, -+-4.27393665167596914500e-03, -+-4.52869350791463860101e-03, -+-4.78009035641408387002e-03, -+-5.02803871308742881402e-03, -+-5.27245206890878791856e-03, -+-5.51324591633307794364e-03, -+-5.75033777470175880286e-03, -+-5.98364721463032038506e-03, -+-6.21309588137129026331e-03, -+-6.43860751714846711591e-03, -+-6.66010798245885143193e-03, -+-6.87752527633716734257e-03, -+-7.09078955558135361203e-03, -+-7.29983315293484570641e-03, -+-7.50459059422442856246e-03, -+-7.70499861445137022159e-03, -+-7.90099617283428028169e-03, -+-8.09252446680348673513e-03, -+-8.27952694494581836748e-03, -+-8.46194931890021165288e-03, -+-8.63973957420479179992e-03, -+-8.81284798009584514900e-03, -+-8.98122709826090423468e-03, -+-9.14483179054685624276e-03, -+-9.30361922562642808254e-03, -+-9.45754888462495800494e-03, -+-9.60658256571109842037e-03, -+-9.75068438765514661215e-03, -+-9.88982079235872779677e-03, -+-1.00239605463608785763e-02, -+-1.01530747413246837108e-02, -+-1.02771367935108499936e-02, -+-1.03961224422430293518e-02, -+-1.05100097473716045521e-02, -+-1.06187790857425311958e-02, -+-1.07224131466778661165e-02, -+-1.08208969264758890494e-02, -+-1.09142177219381259629e-02, -+-1.10023651229317290939e-02, -+-1.10853310039956218930e-02, -+-1.11631095149994884197e-02, -+-1.12356970708646971419e-02, -+-1.13030923403568215463e-02, -+-1.13652962339602110059e-02, -+-1.14223118908440956359e-02, -+-1.14741446649318026840e-02, -+-1.15208021100836454503e-02, -+-1.15622939644049946284e-02, -+-1.15986321336910645080e-02, -+-1.16298306740207010868e-02, -+-1.16559057735113307669e-02, -+-1.16768757332475214827e-02, -+-1.16927609473963332182e-02, -+-1.17035838825226608945e-02, -+-1.17093690561177760784e-02, -+-1.17101430143551586693e-02, -+-1.17059343090872795129e-02, -+-1.16967734740980097013e-02, -+-1.16826930006248379257e-02, -+-1.16637273121658596037e-02, -+-1.16399127385864407935e-02, -+-1.16112874895409699111e-02, -+-1.15778916272246922003e-02, -+-1.15397670384720374415e-02, -+-1.14969574062164479888e-02, -+-1.14495081803284975280e-02, -+-1.13974665478479546959e-02, -+-1.13408814026266253211e-02, -+-1.12798033143984600957e-02, -+-1.12142844972935168402e-02, -+-1.11443787778127377519e-02, -+-1.10701415622809114236e-02, -+-1.09916298037944538957e-02, -+-1.09089019686816925125e-02, -+-1.08220180024931385970e-02, -+-1.07310392955389764802e-02, -+-1.06360286479915983754e-02, -+-1.05370502345710423397e-02, -+-1.04341695688310136247e-02, -+-1.03274534670632443106e-02, -+-1.02169700118386209270e-02, -+-1.01027885152025192345e-02, -+-9.98497948154308812008e-03, -+-9.86361457015006402871e-03, -+-9.73876655748246930488e-03, -+-9.61050929916365190286e-03, -+-9.47891769172138146105e-03, -+-9.34406763409175583623e-03, -+-9.20603598890469380922e-03, -+-9.06490054356958417647e-03, -+-8.92073997117914622990e-03, -+-8.77363379124968326139e-03, -+-8.62366233031589164704e-03, -+-8.47090668239862398803e-03, -+-8.31544866936306283078e-03, -+-8.15737080118616487978e-03, -+-7.99675623615058242533e-03, -+-7.83368874098351944402e-03, -+-7.66825265095798756787e-03, -+-7.50053282997436773782e-03, -+-7.33061463064018075525e-03, -+-7.15858385436481461928e-03, -+-6.98452671148786126409e-03, -+-6.80852978145714965441e-03, -+-6.63067997307481386826e-03, -+-6.45106448482760802543e-03, -+-6.26977076531890029770e-03, -+-6.08688647381931853542e-03, -+-5.90249944095203298716e-03, -+-5.71669762953000513278e-03, -+-5.52956909556100162373e-03, -+-5.34120194943696596085e-03, -+-5.15168431732329797079e-03, -+-4.96110430276443595266e-03, -+-4.76954994852103134756e-03, -+-4.57710919865432410564e-03, -+-4.38386986087277181340e-03, -+-4.18991956915663876782e-03, -+-3.99534574667439676410e-03, -+-3.80023556900675307108e-03, -+-3.60467592769156538676e-03, -+-3.40875339410503987864e-03, -+-3.21255418369197943973e-03, -+-3.01616412055992575564e-03, -+-2.81966860245005685598e-03, -+-2.62315256609809257030e-03, -+-2.42670045299875130826e-03, -+-2.23039617558575898118e-03, -+-2.03432308384080993632e-03, -+-1.83856393234277533909e-03, -+-1.64320084776991355742e-03, -+-1.44831529686655904529e-03, -+-1.25398805488530435195e-03, -+-1.06029917451672204415e-03, -+-8.67327955316482155854e-04, -+-6.75152913641518712638e-04, -+-4.83851753104545291573e-04, -+-2.93501335557769932588e-04, -+-1.04177652615230481180e-04, -+ 8.40442022771478958144e-05, -+ 2.71090061213828637746e-04, -+ 4.56886708636217294885e-04, -+ 6.41361907564611910364e-04, -+ 8.24444425246958221068e-04, -+ 1.00606405821750295726e-03, -+ 1.18615165675600578790e-03, -+ 1.36463914874257485378e-03, -+ 1.54145956289825905236e-03, -+ 1.71654705140769636706e-03, -+ 1.88983691191461173828e-03, -+ 2.06126560888645086675e-03, -+ 2.23077079434063144103e-03, -+ 2.39829132792830895110e-03, -+ 2.56376729636941056573e-03, -+ 2.72714003223500402184e-03, -+ 2.88835213207216685155e-03, -+ 3.04734747386685260462e-03, -+ 3.20407123384176817371e-03, -+ 3.35846990258462183704e-03, -+ 3.51049130050470068257e-03, -+ 3.66008459261367522647e-03, -+ 3.80720030262936314294e-03, -+ 3.95179032639856198800e-03, -+ 4.09380794463911311387e-03, -+ 4.23320783499702736619e-03, -+ 4.36994608342004212803e-03, -+ 4.50398019484403704799e-03, -+ 4.63526910319382156461e-03, -+ 4.76377318069614620610e-03, -+ 4.88945424650618146178e-03, -+ 5.01227557464674778470e-03, -+ 5.13220190126144337750e-03, -+ 5.24919943118207308480e-03, -+ 5.36323584381190321402e-03, -+ 5.47428029832571112767e-03, -+ 5.58230343818897148389e-03, -+ 5.68727739499729628703e-03, -+ 5.78917579163970574818e-03, -+ 5.88797374478673089110e-03, -+ 5.98364786670789981782e-03, -+ 6.07617626642060343345e-03, -+ 6.16553855017385084303e-03, -+ 6.25171582127166582804e-03, -+ 6.33469067923863194541e-03, -+ 6.41444721833308011821e-03, -+ 6.49097102541174898749e-03, -+ 6.56424917715103632687e-03, -+ 6.63427023662958338657e-03, -+ 6.70102424927795491810e-03, -+ 6.76450273820044644529e-03, -+ 6.82469869887525251023e-03, -+ 6.88160659323871527759e-03, -+ 6.93522234316026366108e-03, -+ 6.98554332331408935064e-03, -+ 7.03256835345506155222e-03, -+ 7.07629769010476809138e-03, -+ 7.11673301765615093362e-03, -+ 7.15387743890304877992e-03, -+ 7.18773546500291789924e-03, -+ 7.21831300488032408247e-03, -+ 7.24561735407938580650e-03, -+ 7.26965718307318129604e-03, -+ 7.29044252503875406940e-03, -+ 7.30798476310635155423e-03, -+ 7.32229661709144288850e-03, -+ 7.33339212971884264747e-03, -+ 7.34128665234775375920e-03, -+ 7.34599683020745793799e-03, -+ 7.34754058715258225737e-03, -+ 7.34593710994830336597e-03, -+ 7.34120683209452638829e-03, -+ 7.33337141719967496728e-03, -+ 7.32245374191355016119e-03, -+ 7.30847787843014878861e-03, -+ 7.29146907657012011139e-03, -+ 7.27145374545387114529e-03, -+ 7.24845943477565521351e-03, -+ 7.22251481568945107037e-03, -+ 7.19364966131744686118e-03, -+ 7.16189482689201083881e-03, -+ 7.12728222954231872138e-03, -+ 7.08984482773655864257e-03, -+ 7.04961660039112210374e-03, -+ 7.00663252565801673161e-03, -+ 6.96092855940177307472e-03, -+ 6.91254161337735619636e-03, -+ 6.86150953312070904788e-03, -+ 6.80787107556324582597e-03, -+ 6.75166588638215301593e-03, -+ 6.69293447709806265528e-03, -+ 6.63171820193170571955e-03, -+ 6.56805923443159328512e-03, -+ 6.50200054388410785683e-03, -+ 6.43358587151825807998e-03, -+ 6.36285970651646794888e-03, -+ 6.28986726184373092646e-03, -+ 6.21465444990643503531e-03, -+ 6.13726785805332464285e-03, -+ 6.05775472392990760317e-03, -+ 5.97616291069856791357e-03, -+ 5.89254088213594148099e-03, -+ 5.80693767761965816410e-03, -+ 5.71940288701587758180e-03, -+ 5.62998662548002196115e-03, -+ 5.53873950818146131014e-03, -+ 5.44571262496510149348e-03, -+ 5.35095751496040238082e-03, -+ 5.25452614115022934027e-03, -+ 5.15647086491062122543e-03, -+ 5.05684442053339500839e-03, -+ 4.95569988974256699088e-03, -+ 4.85309067621648645985e-03, -+ 4.74907048012647350216e-03, -+ 4.64369327270371719946e-03, -+ 4.53701327084515566163e-03, -+ 4.42908491176951992635e-03, -+ 4.31996282773485212186e-03, -+ 4.20970182082771107734e-03, -+ 4.09835683783572966160e-03, -+ 3.98598294521311340144e-03, -+ 3.87263530415101094040e-03, -+ 3.75836914576165720403e-03, -+ 3.64323974638825019007e-03, -+ 3.52730240304928790995e-03, -+ 3.41061240902878646739e-03, -+ 3.29322502962129748730e-03, -+ 3.17519547804233142826e-03, -+ 3.05657889151338601694e-03, -+ 2.93743030753160130203e-03, -+ 2.81780464033296821486e-03, -+ 2.69775665755896121301e-03, -+ 2.57734095713514719389e-03, -+ 2.45661194437134461702e-03, -+ 2.33562380929147129019e-03, -+ 2.21443050420279223534e-03, -+ 2.09308572151161147862e-03, -+ 1.97164287179554201940e-03, -+ 1.85015506213867531038e-03, -+ 1.72867507473943343883e-03, -+ 1.60725534579748128607e-03, -+ 1.48594794468843234732e-03, -+ 1.36480455343317803527e-03, -+ 1.24387644646943291808e-03, -+ 1.12321447073277739387e-03, -+ 1.00286902605367005473e-03, -+ 8.82890045877847201225e-04, -+ 7.63326978315998568199e-04, -+ 6.44228767529792380013e-04, -+ 5.25643835459782418976e-04, -+ 4.07620063901896608968e-04, -+ 2.90204776937506045247e-04, -+ 1.73444723723805766706e-04, -+ 5.73860616484244659592e-05, -+-5.79256601447129809831e-05, -+-1.72445516855139978872e-04, -+-2.86129223744603178401e-04, -+-3.98933151471683798521e-04, -+-5.10814341036775051638e-04, -+-6.21730518333987194034e-04, -+-7.31640108305292775383e-04, -+-8.40502248693749103720e-04, -+-9.48276803391555388537e-04, -+-1.05492437538016840815e-03, -+-1.16040631925863960139e-03, -+-1.26468475335793167046e-03, -+-1.36772257143744795961e-03, -+-1.46948345396231690001e-03, -+-1.56993187895820992227e-03, -+-1.66903313244173671925e-03, -+-1.76675331842487395514e-03, -+-1.86305936849075486246e-03, -+-1.95791905094055886799e-03, -+-2.05130097950870097026e-03, -+-2.14317462164644121497e-03, -+-2.23351030637205421117e-03, -+-2.32227923168745655630e-03, -+-2.40945347156019864382e-03, -+-2.49500598247101752769e-03, -+-2.57891060952624437755e-03, -+-2.66114209213571661222e-03, -+-2.74167606925580006200e-03, -+-2.82048908419860059130e-03, -+-2.89755858900738426376e-03, -+-2.97286294839969704451e-03, -+-3.04638144327833843006e-03, -+-3.11809427381250833106e-03, -+-3.18798256208930414976e-03, -+-3.25602835433819615824e-03, -+-3.32221462272949338845e-03, -+-3.38652526674922864716e-03, -+-3.44894511415224942069e-03, -+-3.50945992149601917673e-03, -+-3.56805637425754813494e-03, -+-3.62472208653601482564e-03, -+-3.67944560034401835918e-03, -+-3.73221638449032109761e-03, -+-3.78302483305743104600e-03, -+-3.83186226347697993233e-03, -+-3.87872091420681094562e-03, -+-3.92359394201303914723e-03, -+-3.96647541886111301701e-03, -+-4.00736032841956212047e-03, -+-4.04624456218095809173e-03, -+-4.08312491520368761599e-03, -+-4.11799908147960237043e-03, -+-4.15086564893147550587e-03, -+-4.18172409404541419592e-03, -+-4.21057477614258761356e-03, -+-4.23741893129556731340e-03, -+-4.26225866589410255086e-03, -+-4.28509694986558761776e-03, -+-4.30593760955555893838e-03, -+-4.32478532027361865092e-03, -+-4.34164559851025946141e-03, -+-4.35652479383043678834e-03, -+-4.36943008044940375129e-03, -+-4.38036944849687272935e-03, -+-4.38935169497548655082e-03, -+-4.39638641441941844384e-03, -+-4.40148398925969356471e-03, -+-4.40465557990201740657e-03, -+-4.40591311452397972614e-03, -+-4.40526927859759102890e-03, -+-4.40273750414399336200e-03, -+-4.39833195872687317957e-03, -+-4.39206753419116562726e-03, -+-4.38395983515392842489e-03, -+-4.37402516725410826781e-03, -+-4.36228052516814471251e-03, -+-4.34874358039834783829e-03, -+-4.33343266884099378305e-03, -+-4.31636677814128347924e-03, -+-4.29756553484226828249e-03, -+-4.27704919133478460302e-03, -+-4.25483861261575103258e-03, -+-4.23095526286197242544e-03, -+-4.20542119182673330285e-03, -+-4.17825902106652539991e-03, -+-4.14949193000528453179e-03, -+-4.11914364184333848390e-03, -+-4.08723840931864319803e-03, -+-4.05380100032764340012e-03, -+-4.01885668341308427420e-03, -+-3.98243121312639048598e-03, -+-3.94455081527187324114e-03, -+-3.90524217204034265055e-03, -+-3.86453240703949710971e-03, -+-3.82244907022857112119e-03, -+-3.77902012276458334344e-03, -+-3.73427392176791782957e-03, -+-3.68823920501411533363e-03, -+-3.64094507555994461798e-03, -+-3.59242098631046497328e-03, -+-3.54269672453505143905e-03, -+-3.49180239633924225512e-03, -+-3.43976841109999795926e-03, -+-3.38662546587152699790e-03, -+-3.33240452976901182711e-03, -+-3.27713682833726460339e-03, -+-3.22085382791172753977e-03, -+-3.16358721997866921757e-03, -+-3.10536890554190866259e-03, -+-3.04623097950279270868e-03, -+-2.98620571506079835605e-03, -+-2.92532554814109750294e-03, -+-2.86362306185669341502e-03, -+-2.80113097101106212072e-03, -+-2.73788210664884781517e-03, -+-2.67390940066071719841e-03, -+-2.60924587044905360173e-03, -+-2.54392460366138209102e-03, -+-2.47797874299740972931e-03, -+-2.41144147109654920225e-03, -+-2.34434599551184728525e-03, -+-2.27672553377682423265e-03, -+-2.20861329857108918892e-03, -+-2.14004248299099744321e-03, -+-2.07104624593109319652e-03, -+-2.00165769758243626206e-03, -+-1.93190988505322330110e-03, -+-1.86183577811795423693e-03, -+-1.79146825509988766485e-03, -+-1.72084008889326943795e-03, -+-1.64998393312966343087e-03, -+-1.57893230849462818527e-03, -+-1.50771758919912264932e-03, -+-1.43637198961127387532e-03, -+-1.36492755105304883201e-03, -+-1.29341612876705033125e-03, -+-1.22186937905778840625e-03, -+-1.15031874661246304344e-03, -+-1.07879545200534983015e-03, -+-1.00733047939059738862e-03, -+-9.35954564387392199190e-04, -+-8.64698182161781326270e-04, -+-7.93591535709335898878e-04, -+-7.22664544342259342231e-04, -+-6.51946832385152269008e-04, -+-5.81467718082645003419e-04, -+-5.11256202723101406751e-04, -+-4.41340959980976682391e-04, -+-3.71750325482115011495e-04, -+-3.02512286594312090893e-04, -+-2.33654472446860898751e-04, -+-1.65204144181543805632e-04, -+-9.71881854382950145007e-05, -+-2.96330930778333087529e-05, -+ 3.74350318557888840534e-05, -+ 1.03990492930665522531e-04, -+ 1.70008006877860913661e-04, -+ 2.35462711895771908792e-04, -+ 3.00330175705594570618e-04, -+ 3.64586403356421419591e-04, -+ 4.28207844777551787079e-04, -+ 4.91171402077186748311e-04, -+ 5.53454436585029511952e-04, -+ 6.15034775638214118408e-04, -+ 6.75890719108685204992e-04, -+ 7.36001045671158494674e-04, -+ 7.95345018810736208159e-04, -+ 8.53902392568785988461e-04, -+ 9.11653417026953884206e-04, -+ 9.68578843528107927274e-04, -+ 1.02465992963409239201e-03, -+ 1.07987844381954517861e-03, -+ 1.13421666990184857697e-03, -+ 1.18765741120669863183e-03, -+ 1.24018399446962118877e-03, -+ 1.29178027347317181048e-03, -+ 1.34243063242041153760e-03, -+ 1.39211998904448393775e-03, -+ 1.44083379745542361494e-03, -+ 1.48855805072399061464e-03, -+ 1.53527928320389963832e-03, -+ 1.58098457259274222282e-03, -+ 1.62566154173287799080e-03, -+ 1.66929836015300469068e-03, -+ 1.71188374535185877309e-03, -+ 1.75340696382495094506e-03, -+ 1.79385783183615881223e-03, -+ 1.83322671593499951850e-03, -+ 1.87150453322187351919e-03, -+ 1.90868275136241117781e-03, -+ 1.94475338835288632730e-03, -+ 1.97970901203875114180e-03, -+ 2.01354273938795765367e-03, -+ 2.04624823552140497340e-03, -+ 2.07781971250251560127e-03, -+ 2.10825192788842950831e-03, -+ 2.13754018304492627786e-03, -+ 2.16568032122775241954e-03, -+ 2.19266872543273649843e-03, -+ 2.21850231601753312277e-03, -+ 2.24317854809751244041e-03, -+ 2.26669540871874157159e-03, -+ 2.28905141381085521987e-03, -+ 2.31024560492300908704e-03, -+ 2.33027754574556848419e-03, -+ 2.34914731842113299123e-03, -+ 2.36685551964774167771e-03, -+ 2.38340325657774047483e-03, -+ 2.39879214251553785076e-03, -+ 2.41302429241780800814e-03, -+ 2.42610231819949092105e-03, -+ 2.43802932384921434983e-03, -+ 2.44880890035772524199e-03, -+ 2.45844512046309356806e-03, -+ 2.46694253321619750424e-03, -+ 2.47430615837057783779e-03, -+ 2.48054148060029584083e-03, -+ 2.48565444354972896537e-03, -+ 2.48965144371932805070e-03, -+ 2.49253932419119233338e-03, -+ 2.49432536819870756192e-03, -+ 2.49501729254406187306e-03, -+ 2.49462324086802481049e-03, -+ 2.49315177677595679884e-03, -+ 2.49061187682437026880e-03, -+ 2.48701292337218105022e-03, -+ 2.48236469730101589823e-03, -+ 2.47667737060877201499e-03, -+ 2.46996149888082565729e-03, -+ 2.46222801364318543901e-03, -+ 2.45348821460201170497e-03, -+ 2.44375376177385136151e-03, -+ 2.43303666751100867299e-03, -+ 2.42134928842652587602e-03, -+ 2.40870431722312039469e-03, -+ 2.39511477443066006163e-03, -+ 2.38059400005651662299e-03, -+ 2.36515564515335941637e-03, -+ 2.34881366330883401689e-03, -+ 2.33158230206161314751e-03, -+ 2.31347609424828503169e-03, -+ 2.29450984928561332182e-03, -+ 2.27469864439260342423e-03, -+ 2.25405781575686164908e-03, -+ 2.23260294964972971082e-03, -+ 2.21034987349466626252e-03, -+ 2.18731464689328946802e-03, -+ 2.16351355261355186160e-03, -+ 2.13896308754443764677e-03, -+ 2.11367995362164717843e-03, -+ 2.08768104872860673846e-03, -+ 2.06098345757712827012e-03, -+ 2.03360444257223585765e-03, -+ 2.00556143466523338278e-03, -+ 1.97687202419953838434e-03, -+ 1.94755395175337346625e-03, -+ 1.91762509898370150235e-03, -+ 1.88710347947544372464e-03, -+ 1.85600722960030926380e-03, -+ 1.82435459938927956557e-03, -+ 1.79216394342290039413e-03, -+ 1.75945371174334418141e-03, -+ 1.72624244079242210488e-03, -+ 1.69254874437936271916e-03, -+ 1.65839130468247841071e-03, -+ 1.62378886328829906069e-03, -+ 1.58876021227249563002e-03, -+ 1.55332418532590395277e-03, -+ 1.51749964892962602506e-03, -+ 1.48130549358308134279e-03, -+ 1.44476062508820820261e-03, -+ 1.40788395589385340219e-03, -+ 1.37069439650360901800e-03, -+ 1.33321084695073701146e-03, -+ 1.29545218834344489506e-03, -+ 1.25743727448406820806e-03, -+ 1.21918492356532437090e-03, -+ 1.18071390994699786103e-03, -+ 1.14204295601606406994e-03, -+ 1.10319072413361980722e-03, -+ 1.06417580867146756643e-03, -+ 1.02501672814153568618e-03, -+ 9.85731917420752321024e-04, -+ 9.46339720074761028661e-04, -+ 9.06858380782653099826e-04, -+ 8.67306037865940180828e-04, -+ 8.27700715924154601863e-04, -+ 7.88060318579825755218e-04, -+ 7.48402621335140681366e-04, -+ 7.08745264542995573667e-04, -+ 6.69105746494616255432e-04, -+ 6.29501416626196083105e-04, -+ 5.89949468846577432593e-04, -+ 5.50466934988384673337e-04, -+ 5.11070678384569518186e-04, -+ 4.71777387572266644969e-04, -+ 4.32603570126133903009e-04, -+ 3.93565546622840108093e-04, -+ 3.54679444738640930936e-04, -+ 3.15961193481461178213e-04, -+ 2.77426517559644606348e-04, -+ 2.39090931888283949464e-04, -+ 2.00969736235134577339e-04, -+ 1.63078010007227617185e-04, -+ 1.25430607179671989044e-04, -+ 8.80421513676910678318e-05, -+ 5.09270310433270975443e-05, -+ 1.40993948977051206995e-05, -+-2.24268526499689963992e-05, -+-5.86380557959355767418e-05, -+-9.45208115468090933828e-05, -+-1.30061973765318488264e-04, -+-1.65248657065980185041e-04, -+-2.00068240560348736649e-04, -+-2.34508371450769772170e-04, -+-2.68556968472767403858e-04, -+-3.02202225185153135114e-04, -+-3.35432613107714699702e-04, -+-3.68236884706315019053e-04, -+-4.00604076224976460123e-04, -+-4.32523510365022737217e-04, -+-4.63984798811095579957e-04, -+-4.94977844604242624843e-04, -+-5.25492844361963827582e-04, -+-5.55520290345540247376e-04, -+-5.85050972374773735341e-04, -+-6.14075979590610184985e-04, -+-6.42586702065795259929e-04, -+-6.70574832264203037069e-04, -+-6.98032366349193725621e-04, -+-7.24951605341828033552e-04, -+-7.51325156129156322866e-04, -+-7.77145932323820387393e-04, -+-8.02407154975299293648e-04, -+-8.27102353133903219450e-04, -+-8.51225364268258727699e-04, -+-8.74770334537431802288e-04, -+-8.97731718918501797773e-04, -+-9.20104281190827605862e-04, -+-9.41883093778050233848e-04, -+-9.63063537449165905750e-04, -+-9.83641300879760935652e-04, -+-1.00361238007481306557e-03, -+-1.02297307765449128208e-03, -+-1.04172000200423238610e-03, -+-1.05985006629069969386e-03, -+-1.07736048734502422482e-03, -+-1.09424878441514257174e-03, -+-1.11051277778848088776e-03, -+-1.12615058728708443934e-03, -+-1.14116063063659394818e-03, -+-1.15554162171100749217e-03, -+-1.16929256865495575027e-03, -+-1.18241277188544584124e-03, -+-1.19490182197486941203e-03, -+-1.20675959741726535404e-03, -+-1.21798626227982297217e-03, -+-1.22858226374166065384e-03, -+-1.23854832952187280184e-03, -+-1.24788546519901061629e-03, -+-1.25659495142406364872e-03, -+-1.26467834102919943727e-03, -+-1.27213745603428412742e-03, -+-1.27897438455362244883e-03, -+-1.28519147760499177768e-03, -+-1.29079134582336268501e-03, -+-1.29577685608154116216e-03, -+-1.30015112802015094483e-03, -+-1.30391753048923449490e-03, -+-1.30707967790388737521e-03, -+-1.30964142651636395419e-03, -+-1.31160687060702277167e-03, -+-1.31298033859659005196e-03, -+-1.31376638908218385492e-03, -+-1.31396980679961724973e-03, -+-1.31359559851441281067e-03, -+-1.31264898884408520024e-03, -+-1.31113541601419526274e-03, -+-1.30906052755070225271e-03, -+-1.30643017591116055581e-03, -+-1.30325041405731484843e-03, -+-1.29952749097163636725e-03, -+-1.29526784712039586857e-03, -+-1.29047810986578645812e-03, -+-1.28516508882973415524e-03, -+-1.27933577121191956356e-03, -+-1.27299731706460124078e-03, -+-1.26615705452684046764e-03, -+-1.25882247502064623448e-03, -+-1.25100122841167137044e-03, -+-1.24270111813698665680e-03, -+-1.23393009630251375940e-03, -+-1.22469625875265661526e-03, -+-1.21500784011470538623e-03, -+-1.20487320882053006339e-03, -+-1.19430086210808427544e-03, -+-1.18329942100529298017e-03, -+-1.17187762529875026674e-03, -+-1.16004432848981092231e-03, -+-1.14780849274044756403e-03, -+-1.13517918381147498753e-03, -+-1.12216556599544479457e-03, -+-1.10877689704675665670e-03, -+-1.09502252311132830878e-03, -+-1.08091187365826806380e-03, -+-1.06645445641585442931e-03, -+-1.05165985231426076241e-03, -+-1.03653771043727446592e-03, -+-1.02109774298538512859e-03, -+-1.00534972025243104707e-03, -+-9.89303465618205854493e-04, -+-9.72968850559070386023e-04, -+-9.56355789678956110487e-04, -+-9.39474235762757228438e-04, -+-9.22334174854466432199e-04, -+-9.04945621361946477522e-04, -+-8.87318613190598128385e-04, -+-8.69463206907894578697e-04, -+-8.51389472940857513876e-04, -+-8.33107490808391681729e-04, -+-8.14627344390523211622e-04, -+-7.95959117236444131487e-04, -+-7.77112887913182157074e-04, -+-7.58098725396869001399e-04, -+-7.38926684508335205812e-04, -+-7.19606801394884719458e-04, -+-7.00149089059903611230e-04, -+-6.80563532942129469604e-04, -+-6.60860086546161931871e-04, -+-6.41048667125920334890e-04, -+-6.21139151422514545521e-04, -+-6.01141371458319205383e-04, -+-5.81065110388481308873e-04, -+-5.60920098411564179222e-04, -+-5.40716008740645473485e-04, -+-5.20462453636329636791e-04, -+-5.00168980502928035153e-04, -+-4.79845068049252442000e-04, -+-4.59500122515179752151e-04, -+-4.39143473965308969373e-04, -+-4.18784372650737749064e-04, -+-3.98431985440370181519e-04, -+-3.78095392322528038760e-04, -+-3.57783582978218623466e-04, -+-3.37505453426840712917e-04, -+-3.17269802745462131330e-04, -+-2.97085329862539673351e-04, -+-2.76960630426857884294e-04, -+-2.56904193752789059696e-04, -+-2.36924399842341755311e-04, -+-2.17029516485020210204e-04, -+-1.97227696436049984184e-04, -+-1.77526974673721080374e-04, -+-1.57935265736364822877e-04, -+-1.38460361139671443579e-04, -+-1.19109926874780676581e-04, -+-9.98915009877096604120e-05, -+-8.08124912404658787314e-05, -+-6.18801728543761411219e-05, -+-4.31016863358901726119e-05, -+-2.44840353852607290751e-05, -+-6.03408488822807525549e-06, -+ 1.22414410087942923482e-05, -+ 3.03359607401630166279e-05, -+ 4.82430370786643698930e-05, -+ 6.59563788094303331657e-05, -+ 8.34698423199615796228e-05, -+ 1.00777433106333784039e-04, -+ 1.17873307195481496850e-04, -+ 1.34751772483674884346e-04, -+ 1.51407289991337552218e-04, -+ 1.67834475034225882872e-04, -+ 1.84028098311239825778e-04, -+ 1.99983086909011169297e-04, -+ 2.15694525223608961004e-04, -+ 2.31157655799539194473e-04, -+ 2.46367880086458945071e-04, -+ 2.61320759113890506518e-04, -+ 2.76012014084471178285e-04, -+ 2.90437526885940853344e-04, -+ 3.04593340522622661477e-04, -+ 3.18475659466672001308e-04, -+ 3.32080849929764377465e-04, -+ 3.45405440055728798956e-04, -+ 3.58446120034815369788e-04, -+ 3.71199742140139986053e-04, -+ 3.83663320687053425832e-04, -+ 3.95834031916090828447e-04, -+ 4.07709213800306149479e-04, -+ 4.19286365777668133727e-04, -+ 4.30563148409382728376e-04, -+ 4.41537382964913725693e-04, -+ 4.52207050934656925797e-04, -+ 4.62570293470961546242e-04, -+ 4.72625410758635230730e-04, -+ 4.82370861315684551149e-04, -+ 4.91805261225328150740e-04, -+ 5.00927383300294468485e-04, -+ 5.09736156180340470138e-04, -+ 5.18230663364083014855e-04, -+ 5.26410142176160977465e-04, -+ 5.34273982670858136115e-04, -+ 5.41821726473215733132e-04, -+ 5.49053065558819199977e-04, -+ 5.55967840973343140065e-04, -+ 5.62566041493084596781e-04, -+ 5.68847802227587348751e-04, -+ 5.74813403165606124842e-04, -+ 5.80463267665585255090e-04, -+ 5.85797960891953992807e-04, -+ 5.90818188198352634011e-04, -+ 5.95524793459205619046e-04, -+ 5.99918757350793364382e-04, -+ 6.04001195583171897330e-04, -+ 6.07773357084216074402e-04, -+ 6.11236622137123529822e-04, -+ 6.14392500472671181100e-04, -+ 6.17242629317575641247e-04, -+ 6.19788771400296852575e-04, -+ 6.22032812915646266330e-04, -+ 6.23976761449542352556e-04, -+ 6.25622743865282679096e-04, -+ 6.26973004152734866845e-04, -+ 6.28029901241785953013e-04, -+ 6.28795906781460817864e-04, -+ 6.29273602886090081127e-04, -+ 6.29465679849935955126e-04, -+ 6.29374933831637162034e-04, -+ 6.29004264509917614644e-04, -+ 6.28356672711923979618e-04, -+ 6.27435258015602670238e-04, -+ 6.26243216327530610385e-04, -+ 6.24783837437580067548e-04, -+ 6.23060502551831571320e-04, -+ 6.21076681805128117189e-04, -+ 6.18835931754663313292e-04, -+ 6.16341892855999597296e-04, -+ 6.13598286922899423257e-04, -+ 6.10608914572360016171e-04, -+ 6.07377652656219848941e-04, -+ 6.03908451680720608987e-04, -+ 6.00205333215381750360e-04, -+ 5.96272387292547546150e-04, -+ 5.92113769798962869678e-04, -+ 5.87733699860716260477e-04, -+ 5.83136457222883410056e-04, -+ 5.78326379625196070923e-04, -+ 5.73307860175058681823e-04, -+ 5.68085344719199331932e-04, -+ 5.62663329215264671791e-04, -+ 5.57046357104629347515e-04, -+ 5.51239016687691835844e-04, -+ 5.45245938502918582949e-04, -+ 5.39071792710859535452e-04, -+ 5.32721286484389919269e-04, -+ 5.26199161406370888652e-04, -+ 5.19510190875949965511e-04, -+ 5.12659177524647379116e-04, -+ 5.05650950643461694588e-04, -+ 4.98490363622070692395e-04, -+ 4.91182291401325650700e-04, -+ 4.83731627940122419548e-04, -+ 4.76143283697776802978e-04, -+ 4.68422183132952726740e-04, -+ 4.60573262220249240485e-04, -+ 4.52601465985464203410e-04, -+ 4.44511746060588389465e-04, -+ 4.36309058259498746754e-04, -+ 4.27998360175392566791e-04, -+ 4.19584608800889610671e-04, -+ 4.11072758171783069880e-04, -+ 4.02467757035333936928e-04, -+ 3.93774546544049656484e-04, -+ 3.84998057975832470683e-04, -+ 3.76143210481313700240e-04, -+ 3.67214908859312392543e-04, -+ 3.58218041361136620669e-04, -+ 3.49157477524604336044e-04, -+ 3.40038066038525694287e-04, -+ 3.30864632638427479810e-04, -+ 3.21641978034209344382e-04, -+ 3.12374875870502510550e-04, -+ 3.03068070720368721877e-04, -+ 2.93726276113044930307e-04, -+ 2.84354172596324122988e-04, -+ 2.74956405834251703824e-04, -+ 2.65537584740686090270e-04, -+ 2.56102279649332684359e-04, -+ 2.46655020520732712157e-04, -+ 2.37200295186851598233e-04, -+ 2.27742547633623577692e-04, -+ 2.18286176322046336163e-04, -+ 2.08835532548216017655e-04, -+ 1.99394918842769620351e-04, -+ 1.89968587410093434423e-04, -+ 1.80560738607737464008e-04, -+ 1.71175519466368710516e-04, -+ 1.61817022250571095152e-04, -+ 1.52489283060860649410e-04, -+ 1.43196280477158617963e-04, -+ 1.33941934244020521144e-04, -+ 1.24730103997818122337e-04, -+ 1.15564588036148766046e-04, -+ 1.06449122129624024050e-04, -+ 9.73873783762444747338e-05, -+ 8.83829640984437603628e-05, -+ 7.94394207830501368397e-05, -+ 7.05602230641164422306e-05, -+ 6.17487777488439845697e-05, -+ 5.30084228865277819307e-05, -+ 4.43424268807018922721e-05, -+ 3.57539876443504868529e-05, -+ 2.72462317982963840894e-05, -+ 1.88222139126731892130e-05, -+ 1.04849157914673770899e-05, -+ 2.23724580001398245952e-06, -+-5.91796176458841909860e-06, -+-1.39779472603022615363e-05, -+-2.19400262443108254274e-05, -+-2.98015899747312779436e-05, -+-3.75601058699388188874e-05, -+-4.52131179258346812058e-05, -+-5.27582470911579511194e-05, -+-6.01931916011169823111e-05, -+-6.75157272696155086192e-05, -+-7.47237077402686759994e-05, -+-8.18150646965978259242e-05, -+-8.87878080315813176041e-05, -+-9.56400259770174112402e-05, -+-1.02369885192932295447e-04, -+-1.08975630817447491838e-04, -+-1.15455586477445233109e-04, -+-1.21808154260462635915e-04, -+-1.28031814648165977134e-04, -+-1.34125126411867404445e-04, -+-1.40086726470483718130e-04, -+-1.45915329711446663599e-04, -+-1.51609728774925367391e-04, -+-1.57168793801964925671e-04, -+-1.62591472146915872604e-04, -+-1.67876788054762332352e-04, -+-1.73023842303760092562e-04, -+-1.78031811814023872061e-04, -+-1.82899949222519527144e-04, -+-1.87627582425063416539e-04, -+-1.92214114085866635134e-04, -+-1.96659021115234305434e-04, -+-2.00961854115964548605e-04, -+-2.05122236799067813760e-04, -+-2.09139865369424642018e-04, -+-2.13014507881963919287e-04, -+-2.16746003569016719827e-04, -+-2.20334262139455170628e-04, -+-2.23779263050288623272e-04, -+-2.27081054751326671731e-04, -+-2.30239753903598189230e-04, -+-2.33255544572162539776e-04, -+-2.36128677394024743099e-04, -+-2.38859468721759089912e-04, -+-2.41448299743606627134e-04, -+-2.43895615580664562507e-04, -+-2.46201924361897988517e-04, -+-2.48367796277648787261e-04, -+-2.50393862612362249915e-04, -+-2.52280814757210175570e-04, -+-2.54029403203337271477e-04, -+-2.55640436516424906718e-04, -+-2.57114780293308988878e-04, -+-2.58453356101321892260e-04, -+-2.59657140401130335366e-04, -+-2.60727163453730896234e-04, -+-2.61664508212373382850e-04, -+-2.62470309200077975623e-04, -+-2.63145751373508769710e-04, -+-2.63692068973905575490e-04, -+-2.64110544365773612825e-04, -+-2.64402506864084673854e-04, -+-2.64569331550674807438e-04, -+-2.64612438080565591254e-04, -+-2.64533289478916812908e-04, -+-2.64333390929326621406e-04, -+-2.64014288554176887285e-04, -+-2.63577568187730454374e-04, -+-2.63024854142685936189e-04, -+-2.62357807970878796362e-04, -+-2.61578127218826830911e-04, -+-2.60687544178804346540e-04, -+-2.59687824636131118095e-04, -+-2.58580766613355161020e-04, -+-2.57368199111998000473e-04, -+-2.56051980852535184582e-04, -+-2.54633999013272917245e-04, -+-2.53116167968770410229e-04, -+-2.51500428028467203686e-04, -+-2.49788744176148520739e-04, -+-2.47983104810888498049e-04, -+-2.46085520490098991209e-04, -+-2.44098022675305284133e-04, -+-2.42022662481256641692e-04, -+-2.39861509428983846149e-04, -+-2.37616650203396260988e-04, -+-2.35290187416002671578e-04, -+-2.32884238373345356290e-04, -+-2.30400933851706944807e-04, -+-2.27842416878660760553e-04, -+-2.25210841522004905167e-04, -+-2.22508371686640725982e-04, -+-2.19737179919906623887e-04, -+-2.16899446225907947382e-04, -+-2.13997356889345798732e-04, -+-2.11033103309352538255e-04, -+-2.08008880843819519632e-04, -+-2.04926887664708660573e-04, -+-2.01789323624807442155e-04, -+-1.98598389136399967663e-04, -+-1.95356284062287273917e-04, -+-1.92065206619610498147e-04, -+-1.88727352296894345393e-04, -+-1.85344912784731391314e-04, -+-1.81920074920499755819e-04, -+-1.78455019647530454055e-04, -+-1.74951920989073971512e-04, -+-1.71412945037461607323e-04, -+-1.67840248958807175192e-04, -+-1.64235980013589989322e-04, -+-1.60602274593463965847e-04, -+-1.56941257274607583660e-04, -+-1.53255039887926981963e-04, -+-1.49545720606400077326e-04, -+-1.45815383049865629223e-04, -+-1.42066095407511174204e-04, -+-1.38299909578337953649e-04, -+-1.34518860329830815736e-04, -+-1.30724964475093245915e-04, -+-1.26920220068654472992e-04, -+-1.23106605621173758290e-04, -+-1.19286079333219134950e-04, -+-1.15460578348350841244e-04, -+-1.11632018025632952099e-04, -+-1.07802291231779830637e-04, -+-1.03973267653065606659e-04, -+-1.00146793127148565233e-04, -+-9.63246889949230804435e-05, -+-9.25087514725346873358e-05, -+-8.87007510436452450671e-05, -+-8.49024318720545515026e-05, -+-8.11155112347393549661e-05, -+-7.73416789754019609908e-05, -+-7.35825969785674924512e-05, -+-6.98398986642887023612e-05, -+-6.61151885034750767074e-05, -+-6.24100415538899748772e-05, -+-5.87260030168200428450e-05, -+-5.50645878143974986741e-05, -+-5.14272801876128782695e-05, -+-4.78155333149380714058e-05, -+-4.42307689515766361233e-05, -+-4.06743770892715146635e-05, -+-3.71477156366324749162e-05, -+-3.36521101199027279356e-05, -+-3.01888534041130525139e-05, -+-2.67592054345224943665e-05, -+-2.33643929982665948157e-05, -+-2.00056095060906951114e-05, -+-1.66840147940797201324e-05, -+-1.34007349452439661363e-05, -+-1.01568621308437851693e-05, -+-6.95345447128813701427e-06, -+-3.79153591650250810366e-06, -+-6.72096145553293655593e-07, -+ 2.40390951459279597616e-06, -+ 5.43556015137456058426e-06, -+ 8.42196931017640123499e-06, -+ 1.13622850193110927676e-05, -+ 1.42556897966238257746e-05, -+ 1.71014006379341248229e-05, -+ 1.98986689875390831126e-05, -+ 2.26467806909793172563e-05, -+ 2.53450559303131682314e-05, -+ 2.79928491421220740245e-05, -+ 3.05895489185053302676e-05, -+ 3.31345778912925430443e-05, -+ 3.56273925997451632237e-05, -+ 3.80674833419947510364e-05, -+ 4.04543740105068599521e-05, -+ 4.27876219118044463113e-05, -+ 4.50668175707753267513e-05, -+ 4.72915845198089502860e-05, -+ 4.94615790730713200283e-05, -+ 5.15764900862005805371e-05, -+ 5.36360387017334339240e-05, -+ 5.56399780805481871900e-05, -+ 5.75880931196438774090e-05, -+ 5.94802001565561985590e-05, -+ 6.13161466607366493955e-05, -+ 6.30958109121965409621e-05, -+ 6.48191016677504891876e-05, -+ 6.64859578151715343739e-05, -+ 6.80963480156043240521e-05, -+ 6.96502703345347587470e-05, -+ 7.11477518616810702089e-05, -+ 7.25888483201263885920e-05, -+ 7.39736436650163245096e-05, -+ 7.53022496721903708853e-05, -+ 7.65748055170595645635e-05, -+ 7.77914773440878826866e-05, -+ 7.89524578272120806021e-05, -+ 8.00579657215541123884e-05, -+ 8.11082454067584148567e-05, -+ 8.21035664223097817662e-05, -+ 8.30442229951717527346e-05, -+ 8.39305335600990616227e-05, -+ 8.47628402729624154692e-05, -+ 8.55415085174379832356e-05, -+ 8.62669264054029689666e-05, -+ 8.69395042713942022743e-05, -+ 8.75596741614536786501e-05, -+ 8.81278893167311284636e-05, -+ 8.86446236521661512422e-05, -+ 8.91103712306026604075e-05, -+ 8.95256457326717546962e-05, -+ 8.98909799227875892661e-05, -+ 9.02069251115862640782e-05, -+ 9.04740506151490363976e-05, -+ 9.06929432113401867103e-05, -+ 9.08642065935940279782e-05, -+ 9.09884608224771455898e-05, -+ 9.10663417753510066833e-05, -+ 9.10985005944656069544e-05, -+ 9.10856031337957275460e-05, -+ 9.10283294049456589850e-05, -+ 9.09273730224310103125e-05, -+ 9.07834406486567112131e-05, -+ 9.05972514388884682737e-05, -+ 9.03695364865346147717e-05, -+ 9.01010382690298824038e-05, -+ 8.97925100946232214449e-05, -+ 8.94447155503604388049e-05, -+ 8.90584279515538464710e-05, -+ 8.86344297930203114553e-05, -+ 8.81735122023717546660e-05, -+ 8.76764743956322256668e-05, -+ 8.71441231354561004216e-05, -+ 8.65772721922116491981e-05, -+ 8.59767418081955635050e-05, -+ 8.53433581652348287718e-05, -+ 8.46779528559294970011e-05, -+ 8.39813623587842351167e-05, -+ 8.32544275174723505482e-05, -+ 8.24979930244696123580e-05, -+ 8.17129069092911340059e-05, -+ 8.09000200315580515319e-05, -+ 8.00601855791177764851e-05, -+ 7.91942585714318722121e-05, -+ 7.83030953684469709260e-05, -+ 7.73875531851490379041e-05, -+ 7.64484896120066966278e-05, -+ 7.54867621414943666810e-05, -+ 7.45032277008856680736e-05, -+ 7.34987421914997258445e-05, -+ 7.24741600345781298914e-05, -+ 7.14303337239639759421e-05, -+ 7.03681133857495075701e-05, -+ 6.92883463450485250238e-05, -+ 6.81918767000556897513e-05, -+ 6.70795449035298084342e-05, -+ 6.59521873518545653477e-05, -+ 6.48106359818019012913e-05, -+ 6.36557178751403541801e-05, -+ 6.24882548712000070136e-05, -+ 6.13090631875229413088e-05, -+ 6.01189530487050480105e-05, -+ 5.89187283235398522627e-05, -+ 5.77091861705600261078e-05, -+ 5.64911166920768371556e-05, -+ 5.52653025968012133018e-05, -+ 5.40325188711331935503e-05, -+ 5.27935324591918643858e-05, -+ 5.15491019516612150597e-05, -+ 5.02999772835162253098e-05, -+ 4.90468994406823114189e-05, -+ 4.77906001756943685883e-05, -+ 4.65318017323872241855e-05, -+ 4.52712165796745444508e-05, -+ 4.40095471544385224527e-05, -+ 4.27474856135762158195e-05, -+ 4.14857135952114382585e-05, -+ 4.02249019891050019768e-05, -+ 3.89657107162695045101e-05, -+ 3.77087885178019617646e-05, -+ 3.64547727529321324196e-05, -+ 3.52042892062907349744e-05, -+ 3.39579519043854685862e-05, -+ 3.27163629412759540162e-05, -+ 3.14801123134230239524e-05, -+ 3.02497777637023744978e-05, -+ 2.90259246345387218443e-05, -+ 2.78091057301432964695e-05, -+ 2.65998611878025348972e-05, -+ 2.53987183581919854364e-05, -+ 2.42061916946511448772e-05, -+ 2.30227826513813061706e-05, -+ 2.18489795905047869758e-05, -+ 2.06852576979222047276e-05, -+ 1.95320789079097866306e-05, -+ 1.83898918363816234168e-05, -+ 1.72591317227478167385e-05, -+ 1.61402203802856600485e-05, -+ 1.50335661549492530784e-05, -+ 1.39395638925266073790e-05, -+ 1.28585949140593193966e-05, -+ 1.17910269994264146578e-05, -+ 1.07372143790027249535e-05, -+ 9.69749773328629209753e-06, -+ 8.67220420039572420566e-06, -+ 7.66164739132314657512e-06, -+ 6.66612741284622437347e-06, -+ 5.68593089796976951548e-06, -+ 4.72133104379410701050e-06, -+ 3.77258765668374723169e-06, -+ 2.83994720461857994069e-06, -+ 1.92364287659795633360e-06, -+ 1.02389464897677183691e-06, -+ 1.40909358598783243636e-07, -+-7.25119217400925882488e-07, -+-1.57401027526573751796e-06, -+-2.40559589188401177682e-06, -+-3.21972092580435969379e-06, -+-4.01624291213239929447e-06, -+-4.79503195145223449727e-06, -+-5.55597059291959898474e-06, -+-6.29895371166915398527e-06, -+-7.02388838068995278969e-06, -+-7.73069373730662337714e-06, -+-8.41930084443043260571e-06, -+-9.08965254672049638874e-06, -+-9.74170332181420186798e-06, -+-1.03754191267770145960e-05, -+-1.09907772399306088372e-05, -+-1.15877660982095854786e-05, -+-1.21663851302071818753e-05, -+-1.27266445850638015879e-05, -+-1.32685653573596831328e-05, -+-1.37921788081646564831e-05, -+-1.42975265824070264185e-05, -+-1.47846604227169150120e-05, -+-1.52536419799077777845e-05, -+-1.57045426202454864190e-05, -+-1.61374432296745794440e-05, -+-1.65524340151509907705e-05, -+-1.69496143032443776877e-05, -+-1.73290923361651281922e-05, -+-1.76909850653765942752e-05, -+-1.80354179429455134585e-05, -+-1.83625247107888849940e-05, -+-1.86724471879742999741e-05, -+-1.89653350562250020523e-05, -+-1.92413456437866339777e-05, -+-1.95006437078064384194e-05, -+-1.97434012153796016272e-05, -+-1.99697971234102591856e-05, -+-2.01800171574394671614e-05, -+-2.03742535895865872536e-05, -+-2.05527050157544749519e-05, -+-2.07155761322383869926e-05, -+-2.08630775118898238230e-05, -+-2.09954253799722451970e-05, -+-2.11128413898529763743e-05, -+-2.12155523986690494219e-05, -+-2.13037902431062623279e-05, -+-2.13777915154254429865e-05, -+-2.14377973398712400380e-05, -+-2.14840531495946086989e-05, -+-2.15168084642204138245e-05, -+-2.15363166681862903517e-05, -+-2.15428347899803886579e-05, -+-2.15366232824005027408e-05, -+-2.15179458039577262574e-05, -+-2.14870690015422825217e-05, -+-2.14442622944694083432e-05, -+-2.13897976600211963056e-05, -+-2.13239494205938423077e-05, -+-2.12469940325636042692e-05, -+-2.11592098769767039874e-05, -+-2.10608770521689021838e-05, -+-2.09522771684173563140e-05, -+-2.08336931447246940868e-05, -+-2.07054090078323760555e-05, -+-2.05677096935581607638e-05, -+-2.04208808505498906150e-05, -+-2.02652086465450858026e-05, -+-2.01009795772225878085e-05, -+-1.99284802777307897448e-05, -+-1.97479973369733553508e-05, -+-1.95598171147313057406e-05, -+-1.93642255616965921713e-05, -+-1.91615080424908975211e-05, -+-1.89519491617392180451e-05, -+-1.87358325932659067312e-05, -+-1.85134409124775290410e-05, -+-1.82850554319945745078e-05, -+-1.80509560405904254164e-05, -+-1.78114210454942761765e-05, -+-1.75667270181107023892e-05, -+-1.73171486432067083623e-05, -+-1.70629585716134836285e-05, -+-1.68044272764881711800e-05, -+-1.65418229131769521309e-05, -+-1.62754111827191523261e-05, -+-1.60054551990284544996e-05, -+-1.57322153597849753270e-05, -+-1.54559492210684566130e-05, -+-1.51769113757617390406e-05, -+-1.48953533357483810943e-05, -+-1.46115234179280960335e-05, -+-1.43256666340692667526e-05, -+-1.40380245845161517285e-05, -+-1.37488353557644599467e-05, -+-1.34583334219182035850e-05, -+-1.31667495500361276861e-05, -+-1.28743107093750131593e-05, -+-1.25812399845332226092e-05, -+-1.22877564924967183814e-05, -+-1.19940753035859587103e-05, -+-1.17004073663007361519e-05, -+-1.14069594360560160192e-05, -+-1.11139340078022052344e-05, -+-1.08215292525168970740e-05, -+-1.05299389575568482923e-05, -+-1.02393524708539662493e-05, -+-9.94995464893742348120e-06, -+-9.66192580876271611343e-06, -+-9.37544168332491989210e-06, -+-9.09067338103246418157e-06, -+-8.80778734881422739372e-06, -+-8.52694533893248795902e-06, -+-8.24830437947059051977e-06, -+-7.97201674846333152320e-06, -+-7.69822995163491404110e-06, -+-7.42708670370925303302e-06, -+-7.15872491325360909230e-06, -+-6.89327767101633304933e-06, -+-6.63087324171573705124e-06, -+-6.37163505923899323223e-06, -+-6.11568172520321447157e-06, -+-5.86312701083429459631e-06, -+-5.61407986211404469277e-06, -+-5.36864440814655013182e-06, -+-5.12691997269171846217e-06, -+-4.88900108881444233564e-06, -+-4.65497751659457443244e-06, -+-4.42493426384305196255e-06, -+-4.19895160976678087265e-06, -+-3.97710513152554464493e-06, -+-3.75946573362158312445e-06, -+-3.54609968006129461300e-06, -+-3.33706862922910230812e-06, -+-3.13242967141053148128e-06, -+-2.93223536890220278037e-06, -+-2.73653379864365903313e-06, -+-2.54536859730841838172e-06, -+-2.35877900878616331091e-06, -+-2.17679993399191934131e-06, -+-1.99946198293410626841e-06, -+-1.82679152897453787459e-06, -+-1.65881076521146377169e-06, -+-1.49553776291791911430e-06, -+-1.33698653196547020166e-06, -+-1.18316708316432299485e-06, -+-1.03408549244911473199e-06, -+-8.89743966841013678409e-07, -+-7.50140912114827378233e-07, -+-6.15271002100918799020e-07, -+-4.85125249549975873449e-07, -+-3.59691078491283933177e-07, -+-2.38952398011216803052e-07, -+-1.22889677382464548894e-07, -+ 0 /* Need a final zero coefficient */ -+ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/float_cast.h k3b-r948463.patched/libk3b/plugin/libsamplerate/float_cast.h ---- k3b-r948463/libk3b/plugin/libsamplerate/float_cast.h 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/float_cast.h 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,205 @@ -+/* -+** Copyright (C) 2001-2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+/* Version 1.3 */ -+ -+ -+/*============================================================================ -+** On Intel Pentium processors (especially PIII and probably P4), converting -+** from float to int is very slow. To meet the C specs, the code produced by -+** most C compilers targeting Pentium needs to change the FPU rounding mode -+** before the float to int conversion is performed. -+** -+** Changing the FPU rounding mode causes the FPU pipeline to be flushed. It -+** is this flushing of the pipeline which is so slow. -+** -+** Fortunately the ISO C99 specifications define the functions lrint, lrintf, -+** llrint and llrintf which fix this problem as a side effect. -+** -+** On Unix-like systems, the configure process should have detected the -+** presence of these functions. If they weren't found we have to replace them -+** here with a standard C cast. -+*/ -+ -+/* -+** The C99 prototypes for lrint and lrintf are as follows: -+** -+** long int lrintf (float x) ; -+** long int lrint (double x) ; -+*/ -+ -+#include "config-k3b.h" -+ -+/* -+** The presence of the required functions are detected during the configure -+** process and the values HAVE_LRINT and HAVE_LRINTF are set accordingly in -+** the config.h file. -+*/ -+ -+#define HAVE_LRINT_REPLACEMENT 0 -+ -+#if (HAVE_LRINT && HAVE_LRINTF) -+ -+ /* -+ ** These defines enable functionality introduced with the 1999 ISO C -+ ** standard. They must be defined before the inclusion of math.h to -+ ** engage them. If optimization is enabled, these functions will be -+ ** inlined. With optimization switched off, you have to link in the -+ ** maths library using -lm. -+ */ -+ -+ #define _ISOC9X_SOURCE 1 -+ #define _ISOC99_SOURCE 1 -+ -+ #define __USE_ISOC9X 1 -+ #define __USE_ISOC99 1 -+ -+ #include <math.h> -+ -+#elif (defined (WIN32) || defined (_WIN32)) -+ -+ #undef HAVE_LRINT_REPLACEMENT -+ #define HAVE_LRINT_REPLACEMENT 1 -+ #include <math.h> -+ -+ /* -+ ** Win32 doesn't seem to have these functions. -+ ** Therefore implement inline versions of these functions here. -+ */ -+ -+ __inline long int -+ lrint (double flt) -+ { int intgr; -+ -+ _asm -+ { fld flt -+ fistp intgr -+ } ; -+ -+ return intgr ; -+ } -+ -+ __inline long int -+ lrintf (float flt) -+ { int intgr; -+ -+ _asm -+ { fld flt -+ fistp intgr -+ } ; -+ -+ return intgr ; -+ } -+ -+#elif (defined (__MWERKS__) && defined (macintosh)) -+ -+ /* This MacOS 9 solution was provided by Stephane Letz */ -+ -+ #undef HAVE_LRINT_REPLACEMENT -+ #define HAVE_LRINT_REPLACEMENT 1 -+ #include <math.h> -+ -+ #undef lrint -+ #undef lrintf -+ -+ #define lrint double2int -+ #define lrintf float2int -+ -+ inline int -+ float2int (register float in) -+ { long res [2] ; -+ -+ asm -+ { fctiw in,in -+ stfd in,res -+ } -+ return res [1] ; -+ } /* float2int */ -+ -+ inline int -+ double2int (register double in) -+ { long res [2] ; -+ -+ asm -+ { fctiw in,in -+ stfd in,res -+ } -+ return res [1] ; -+ } /* double2int */ -+ -+#elif (defined (__MACH__) && defined (__APPLE__)) -+ -+ /* For Apple MacOSX. */ -+ -+ #undef HAVE_LRINT_REPLACEMENT -+ #define HAVE_LRINT_REPLACEMENT 1 -+ #include <math.h> -+ -+ #undef lrint -+ #undef lrintf -+ -+ #define lrint double2int -+ #define lrintf float2int -+ -+ inline static long int -+ float2int (register float in) -+ { int res [2] ; -+ -+ __asm__ __volatile__ -+ ( "fctiw %1, %1\n\t" -+ "stfd %1, %0" -+ : "=m" (res) /* Output */ -+ : "f" (in) /* Input */ -+ : "memory" -+ ) ; -+ -+ return res [1] ; -+ } /* lrintf */ -+ -+ inline static long int -+ double2int (register double in) -+ { int res [2] ; -+ -+ __asm__ __volatile__ -+ ( "fctiw %1, %1\n\t" -+ "stfd %1, %0" -+ : "=m" (res) /* Output */ -+ : "f" (in) /* Input */ -+ : "memory" -+ ) ; -+ -+ return res [1] ; -+ } /* lrint */ -+ -+#else -+ #ifndef __sgi -+#ifdef __GNUC__ -+ #warning "Don't have the functions lrint() and lrintf()." -+#endif -+ #warning "Replacing these functions with a standard C cast." -+ #endif -+ -+ #include <math.h> -+ -+ #define lrint(dbl) ((int) (dbl)) -+ #define lrintf(flt) ((int) (flt)) -+ -+#endif -+ -+ -+ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/high_qual_coeffs.h k3b-r948463.patched/libk3b/plugin/libsamplerate/high_qual_coeffs.h ---- k3b-r948463/libk3b/plugin/libsamplerate/high_qual_coeffs.h 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/high_qual_coeffs.h 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,17116 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Steet, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+/* -+** f = make_filter (65, 128, 100.3) ; -+** Pass band width : 0.0039062 (should be 0.0039062) -+** Stop band atten. : 101.20 dB -+** -3dB band width : 0.846 -+** half length : 17087 -+** increment : 128 -+*/ -+ -+ 9.73822959712628111184e-01, -+ 9.73730227534126968614e-01, -+ 9.73452062795049033461e-01, -+ 9.72988560871685836950e-01, -+ 9.72339880681256651940e-01, -+ 9.71506244617024061760e-01, -+ 9.70487938457503807044e-01, -+ 9.69285311249795999977e-01, -+ 9.67898775167100988703e-01, -+ 9.66328805340476049146e-01, -+ 9.64575939664910952942e-01, -+ 9.62640778579811451365e-01, -+ 9.60523984823974497083e-01, -+ 9.58226283165186876190e-01, -+ 9.55748460104550945360e-01, -+ 9.53091363555660264772e-01, -+ 9.50255902498805649081e-01, -+ 9.47243046610318550904e-01, -+ 9.44053825867236739988e-01, -+ 9.40689330127495004774e-01, -+ 9.37150708685763667027e-01, -+ 9.33439169805209578712e-01, -+ 9.29555980225306610620e-01, -+ 9.25502464645995059911e-01, -+ 9.21280005188352291157e-01, -+ 9.16890040832049391106e-01, -+ 9.12334066829837087020e-01, -+ 9.07613634099317501125e-01, -+ 9.02730348592271192310e-01, -+ 8.97685870641828032035e-01, -+ 8.92481914287746591619e-01, -+ 8.87120246580144211634e-01, -+ 8.81602686861939210949e-01, -+ 8.75931106030353401337e-01, -+ 8.70107425777795429056e-01, -+ 8.64133617812459453589e-01, -+ 8.58011703058984220860e-01, -+ 8.51743750839512703266e-01, -+ 8.45331878035551986805e-01, -+ 8.38778248230970913113e-01, -+ 8.32085070836509732572e-01, -+ 8.25254600196225540643e-01, -+ 8.18289134676235541122e-01, -+ 8.11191015736170029093e-01, -+ 8.03962626983747541409e-01, -+ 7.96606393212902830214e-01, -+ 7.89124779425847022729e-01, -+ 7.81520289839554460620e-01, -+ 7.73795466877067239508e-01, -+ 7.65952890144075193568e-01, -+ 7.57995175391232733908e-01, -+ 7.49924973462656851986e-01, -+ 7.41744969231072803773e-01, -+ 7.33457880520075322650e-01, -+ 7.25066457013996301662e-01, -+ 7.16573479155810266761e-01, -+ 7.07981757033636860399e-01, -+ 6.99294129256251117965e-01, -+ 6.90513461818149987259e-01, -+ 6.81642646954653708136e-01, -+ 6.72684601987533770107e-01, -+ 6.63642268161698578588e-01, -+ 6.54518609473419998857e-01, -+ 6.45316611490632463521e-01, -+ 6.36039280165809350898e-01, -+ 6.26689640641951539735e-01, -+ 6.17270736052177193542e-01, -+ 6.07785626313482429950e-01, -+ 5.98237386915153934730e-01, -+ 5.88629107702400733437e-01, -+ 5.78963891655698170702e-01, -+ 5.69244853666411754212e-01, -+ 5.59475119309209012464e-01, -+ 5.49657823611788054485e-01, -+ 5.39796109822496594788e-01, -+ 5.29893128176318617406e-01, -+ 5.19952034659813655537e-01, -+ 5.09975989775514948477e-01, -+ 4.99968157306331650869e-01, -+ 4.89931703080488667457e-01, -+ 4.79869793737535021982e-01, -+ 4.69785595495954833023e-01, -+ 4.59682272922913082169e-01, -+ 4.49562987706663808041e-01, -+ 4.39430897432148248605e-01, -+ 4.29289154360313895964e-01, -+ 4.19140904211673437363e-01, -+ 4.08989284954621334922e-01, -+ 3.98837425599043837732e-01, -+ 3.88688444995713366925e-01, -+ 3.78545450641997294206e-01, -+ 3.68411537494394758507e-01, -+ 3.58289786788378861182e-01, -+ 3.48183264866087693878e-01, -+ 3.38095022012320112204e-01, -+ 3.28028091299366553191e-01, -+ 3.17985487441129255348e-01, -+ 3.07970205657046469661e-01, -+ 2.97985220546282070231e-01, -+ 2.88033484972657738421e-01, -+ 2.78117928960799731808e-01, -+ 2.68241458603957205753e-01, -+ 2.58406954983961600902e-01, -+ 2.48617273103761360353e-01, -+ 2.38875240832987723039e-01, -+ 2.29183657866993378827e-01, -+ 2.19545294699780346726e-01, -+ 2.09962891611264163005e-01, -+ 2.00439157669269424344e-01, -+ 1.90976769746686869667e-01, -+ 1.81578371554184297976e-01, -+ 1.72246572688870225321e-01, -+ 1.62983947699301107148e-01, -+ 1.53793035167208436143e-01, -+ 1.44676336806320998685e-01, -+ 1.35636316578646581865e-01, -+ 1.26675399828566487281e-01, -+ 1.17795972435093473929e-01, -+ 1.09000379982627515485e-01, -+ 1.00290926950544131979e-01, -+ 9.16698759219308212387e-02, -+ 8.31394468117901269677e-02, -+ 7.47018161150024284645e-02, -+ 6.63591161743508073378e-02, -+ 5.81134344688867474082e-02, -+ 4.99668129229093108123e-02, -+ 4.19212472358281990070e-02, -+ 3.39786862331567796058e-02, -+ 2.61410312388884458201e-02, -+ 1.84101354694814652035e-02, -+ 1.07878034496857889285e-02, -+ 3.27579045041895364904e-03, -+-4.12419805110235924983e-03, -+-1.14105068887806991584e-02, -+-1.85815317024259456236e-02, -+-2.56357194097392264431e-02, -+-3.25715686553301464468e-02, -+-3.93876302366183567161e-02, -+-4.60825075064776670808e-02, -+-5.26548567524927901840e-02, -+-5.91033875527125010518e-02, -+-6.54268631077873363822e-02, -+-7.16241005493989252306e-02, -+-7.76939712248916614090e-02, -+-8.36354009580342477870e-02, -+-8.94473702858456093390e-02, -+-9.51289146714309197250e-02, -+-1.00679124692788404816e-01, -+-1.06097146207554629549e-01, -+-1.11382180493666688159e-01, -+-1.16533484365933040494e-01, -+-1.21550370268516991223e-01, -+-1.26432206343341957400e-01, -+-1.31178416474445280748e-01, -+-1.35788480308313530553e-01, -+-1.40261933250244968940e-01, -+-1.44598366436796466061e-01, -+-1.48797426684381700612e-01, -+-1.52858816414098541703e-01, -+-1.56782293552872986631e-01, -+-1.60567671411021850592e-01, -+-1.64214818536340179111e-01, -+-1.67723658544838616358e-01, -+-1.71094169928257461288e-01, -+-1.74326385838498049141e-01, -+-1.77420393849128360531e-01, -+-1.80376335694119815933e-01, -+-1.83194406983985758064e-01, -+-1.85874856899509832697e-01, -+-1.88417987863249564162e-01, -+-1.90824155189017602430e-01, -+-1.93093766709557357331e-01, -+-1.95227282382623990031e-01, -+-1.97225213875713484279e-01, -+-1.99088124129663118778e-01, -+-2.00816626901390404836e-01, -+-2.02411386286012268121e-01, -+-2.03873116218622224549e-01, -+-2.05202579955993086314e-01, -+-2.06400589538496825881e-01, -+-2.07468005232528396320e-01, -+-2.08405734953734406156e-01, -+-2.09214733671363894985e-01, -+-2.09896002794046132589e-01, -+-2.10450589537331811396e-01, -+-2.10879586273321456558e-01, -+-2.11184129862729524918e-01, -+-2.11365400969725530933e-01, -+-2.11424623359909302778e-01, -+-2.11363063181782606659e-01, -+-2.11182028232088397912e-01, -+-2.10882867205385543530e-01, -+-2.10466968928249342774e-01, -+-2.09935761578479540557e-01, -+-2.09290711889717429006e-01, -+-2.08533324341858283812e-01, -+-2.07665140337684211991e-01, -+-2.06687737366111012882e-01, -+-2.05602728152473046563e-01, -+-2.04411759796272074485e-01, -+-2.03116512896803713684e-01, -+-2.01718700667107064817e-01, -+-2.00220068036660509003e-01, -+-1.98622390743273286029e-01, -+-1.96927474414606312747e-01, -+-1.95137153639780930314e-01, -+-1.93253291031515200826e-01, -+-1.91277776279251604530e-01, -+-1.89212525193726166517e-01, -+-1.87059478743444584925e-01, -+-1.84820602083524743176e-01, -+-1.82497883577372205233e-01, -+-1.80093333811659150889e-01, -+-1.77608984605069908369e-01, -+-1.75046888011289869524e-01, -+-1.72409115316711214483e-01, -+-1.69697756033324376190e-01, -+-1.66914916887274944468e-01, -+-1.64062720803562822613e-01, -+-1.61143305887356008688e-01, -+-1.58158824402401171350e-01, -+-1.55111441747006084668e-01, -+-1.52003335428069458191e-01, -+-1.48836694033641553370e-01, -+-1.45613716204482351868e-01, -+-1.42336609605105829379e-01, -+-1.39007589894771910188e-01, -+-1.35628879698910465024e-01, -+-1.32202707581443923424e-01, -+-1.28731307018481316851e-01, -+-1.25216915373852127891e-01, -+-1.21661772876947515964e-01, -+-1.18068121603333617275e-01, -+-1.14438204458597023172e-01, -+-1.10774264165883040700e-01, -+-1.07078542257586659114e-01, -+-1.03353278071642365465e-01, -+-9.96007077528702211566e-02, -+-9.58230632598184722815e-02, -+-9.20225713775505993475e-02, -+-8.82014527368129436224e-02, -+-8.43619208400154807492e-02, -+-8.05061810944624617337e-02, -+-7.66364298532504761852e-02, -+-7.27548534642616651080e-02, -+-6.88636273276640731300e-02, -+-6.49649149623320182334e-02, -+-6.10608670815911136476e-02, -+-5.71536206786884617981e-02, -+-5.32452981223815041689e-02, -+-4.93380062630371721277e-02, -+-4.54338355496189602589e-02, -+-4.15348591579423748188e-02, -+-3.76431321305677607514e-02, -+-3.37606905286930644716e-02, -+-2.98895505964036217739e-02, -+-2.60317079376298707305e-02, -+-2.21891367061550388862e-02, -+-1.83637888090092127324e-02, -+-1.45575931235783270074e-02, -+-1.07724547287478406021e-02, -+-7.01025415039811198442e-03, -+-3.27284662155273445641e-03, -+ 4.37938642517908310794e-04, -+ 4.12029915395035594566e-03, -+ 7.77245984641533344678e-03, -+ 1.13926737534469080249e-02, -+ 1.49792226707046640527e-02, -+ 1.85304178019153227563e-02, -+ 2.20446003882424183817e-02, -+ 2.55201423208448671676e-02, -+ 2.89554467363942642788e-02, -+ 3.23489485953257979722e-02, -+ 3.56991152426125377128e-02, -+ 3.90044469508545738057e-02, -+ 4.22634774454904785235e-02, -+ 4.54747744119432459331e-02, -+ 4.86369399845229810619e-02, -+ 5.17486112169195516808e-02, -+ 5.48084605341252126265e-02, -+ 5.78151961656372809228e-02, -+ 6.07675625598040544673e-02, -+ 6.36643407791787629968e-02, -+ 6.65043488767638746317e-02, -+ 6.92864422530337364936e-02, -+ 7.20095139936314521112e-02, -+ 7.46724951876515663507e-02, -+ 7.72743552264206767788e-02, -+ 7.98141020827076302924e-02, -+ 8.22907825702981904348e-02, -+ 8.47034825838767768680e-02, -+ 8.70513273191783898408e-02, -+ 8.93334814733681981114e-02, -+ 9.15491494256309712441e-02, -+ 9.36975753979484987655e-02, -+ 9.57780435960658566019e-02, -+ 9.77898783306437036078e-02, -+ 9.97324441186170501661e-02, -+ 1.01605145764776208517e-01, -+ 1.03407428423609545898e-01, -+ 1.05138777641444206012e-01, -+ 1.06798719378940032421e-01, -+ 1.08386820013995285872e-01, -+ 1.09902686325133475131e-01, -+ 1.11345965455456150095e-01, -+ 1.12716344857240108324e-01, -+ 1.14013552217288011148e-01, -+ 1.15237355363129817531e-01, -+ 1.16387562150195578159e-01, -+ 1.17464020330083573906e-01, -+ 1.18466617400054957665e-01, -+ 1.19395280433899547701e-01, -+ 1.20249975894323096748e-01, -+ 1.21030709427012495016e-01, -+ 1.21737525636550936170e-01, -+ 1.22370507844354617366e-01, -+ 1.22929777828819461472e-01, -+ 1.23415495547866391202e-01, -+ 1.23827858844088756207e-01, -+ 1.24167103132708178670e-01, -+ 1.24433501072553173716e-01, -+ 1.24627362220290069383e-01, -+ 1.24749032668130088730e-01, -+ 1.24798894665256510095e-01, -+ 1.24777366223214461471e-01, -+ 1.24684900705517007213e-01, -+ 1.24521986401729317651e-01, -+ 1.24289146086293156301e-01, -+ 1.23986936562369309822e-01, -+ 1.23615948190973698462e-01, -+ 1.23176804405697795652e-01, -+ 1.22670161213299697134e-01, -+ 1.22096706680470845630e-01, -+ 1.21457160407075034914e-01, -+ 1.20752272986177383585e-01, -+ 1.19982825451170740938e-01, -+ 1.19149628710327484815e-01, -+ 1.18253522969096608319e-01, -+ 1.17295377140480550082e-01, -+ 1.16276088243826986046e-01, -+ 1.15196580792372674229e-01, -+ 1.14057806169890793568e-01, -+ 1.12860741996784086361e-01, -+ 1.11606391485979145051e-01, -+ 1.10295782788982596467e-01, -+ 1.08929968332454704671e-01, -+ 1.07510024145666946427e-01, -+ 1.06037049179214082351e-01, -+ 1.04512164615345154450e-01, -+ 1.02936513170294341446e-01, -+ 1.01311258388983055356e-01, -+ 9.96375839324763756810e-02, -+ 9.79166928585712137423e-02, -+ 9.61498068959035084857e-02, -+ 9.43381657119597566430e-02, -+ 9.24830261753778609668e-02, -+ 9.05856616129300240559e-02, -+ 8.86473610615743090602e-02, -+ 8.66694285159709948418e-02, -+ 8.46531821718525673282e-02, -+ 8.25999536656427529868e-02, -+ 8.05110873107188207420e-02, -+ 7.83879393307109761935e-02, -+ 7.62318770902338793682e-02, -+ 7.40442783234440127238e-02, -+ 7.18265303608213723230e-02, -+ 6.95800293545625059277e-02, -+ 6.73061795029863685347e-02, -+ 6.50063922743394223547e-02, -+ 6.26820856303954981881e-02, -+ 6.03346832502406754672e-02, -+ 5.79656137546301838959e-02, -+ 5.55763099313076533448e-02, -+ 5.31682079616711544823e-02, -+ 5.07427466491714163066e-02, -+ 4.83013666498223193102e-02, -+ 4.58455097052048524131e-02, -+ 4.33766178783417805098e-02, -+ 4.08961327928156204159e-02, -+ 3.84054948755038344510e-02, -+ 3.59061426032981009793e-02, -+ 3.33995117541749445000e-02, -+ 3.08870346629779371495e-02, -+ 2.83701394822698481357e-02, -+ 2.58502494486117818939e-02, -+ 2.33287821546176998844e-02, -+ 2.08071488271321346220e-02, -+ 1.82867536118745781237e-02, -+ 1.57689928648852076276e-02, -+ 1.32552544511122961240e-02, -+ 1.07469170504618516393e-02, -+ 8.24534947164058847069e-03, -+ 5.75190997410870291651e-03, -+ 3.26794559845353929303e-03, -+ 7.94791505500461897306e-04, -+-1.66622967554532603295e-03, -+-4.11380848962069559788e-03, -+-6.54664928870115660209e-03, -+-8.96347085478857441565e-03, -+-1.13630070127026094190e-02, -+-1.37440072324107598334e-02, -+-1.61052372206219249207e-02, -+-1.84454795013846463425e-02, -+-2.07635339854373018875e-02, -+-2.30582185280550702733e-02, -+-2.53283694751598974226e-02, -+-2.75728421974516593740e-02, -+-2.97905116123358577884e-02, -+-3.19802726934248146562e-02, -+-3.41410409673992970570e-02, -+-3.62717529980220235175e-02, -+-3.83713668571045649069e-02, -+-4.04388625822339128901e-02, -+-4.24732426210736174754e-02, -+-4.44735322620624928813e-02, -+-4.64387800513385851087e-02, -+-4.83680581957297989204e-02, -+-5.02604629516505974074e-02, -+-5.21151149997620341536e-02, -+-5.39311598052534396652e-02, -+-5.57077679636137287900e-02, -+-5.74441355317703919448e-02, -+-5.91394843444778550712e-02, -+-6.07930623158483146584e-02, -+-6.24041437259244130553e-02, -+-6.39720294922026394557e-02, -+-6.54960474260223579623e-02, -+-6.69755524737441765293e-02, -+-6.84099269426502037961e-02, -+-6.97985807115074213813e-02, -+-7.11409514257386743630e-02, -+-7.24365046771608261933e-02, -+-7.36847341682554390907e-02, -+-7.48851618609372993163e-02, -+-7.60373381098108092058e-02, -+-7.71408417798946782762e-02, -+-7.81952803488157183187e-02, -+-7.92002899934755172362e-02, -+-8.01555356612003028216e-02, -+-8.10607111253977136167e-02, -+-8.19155390257452209468e-02, -+-8.27197708929510444609e-02, -+-8.34731871581248646708e-02, -+-8.41755971468178959549e-02, -+-8.48268390577856662427e-02, -+-8.54267799265437804968e-02, -+-8.59753155737910251810e-02, -+-8.64723705387828583957e-02, -+-8.69178979977427990100e-02, -+-8.73118796674136471436e-02, -+-8.76543256938471931905e-02, -+-8.79452745265522362050e-02, -+-8.81847927781117119084e-02, -+-8.83729750694022264668e-02, -+-8.85099438605464611252e-02, -+-8.85958492677388215197e-02, -+-8.86308688660923243985e-02, -+-8.86152074786611815282e-02, -+-8.85490969517982173809e-02, -+-8.84327959170169153325e-02, -+-8.82665895395295801995e-02, -+-8.80507892536431108210e-02, -+-8.77857324851982756542e-02, -+-8.74717823612454203897e-02, -+-8.71093274071546297410e-02, -+-8.66987812313650407781e-02, -+-8.62405821979837367008e-02, -+-8.57351930874506312774e-02, -+-8.51831007454873639917e-02, -+-8.45848157205629364030e-02, -+-8.39408718901024919479e-02, -+-8.32518260756789918453e-02, -+-8.25182576474303292047e-02, -+-8.17407681179471573563e-02, -+-8.09199807258840636548e-02, -+-8.00565400095505641520e-02, -+-7.91511113707415864260e-02, -+-7.82043806290729365260e-02, -+-7.72170535670915342275e-02, -+-7.61898554664313942819e-02, -+-7.51235306352922710404e-02, -+-7.40188419275257664109e-02, -+-7.28765702536047221827e-02, -+-7.16975140837712299202e-02, -+-7.04824889436477669546e-02, -+-6.92323269026086512978e-02, -+-6.79478760552057331479e-02, -+-6.66299999959486799472e-02, -+-6.52795772877406560442e-02, -+-6.38975009242730290770e-02, -+-6.24846777866859409700e-02, -+-6.10420280948025528733e-02, -+-5.95704848532464525945e-02, -+-5.80709932927548425075e-02, -+-5.65445103069988283528e-02, -+-5.49920038852278469932e-02, -+-5.34144525410520376596e-02, -+-5.18128447376807535485e-02, -+-5.01881783099329334408e-02, -+-4.85414598833405000478e-02, -+-4.68737042906593598390e-02, -+-4.51859339861135078653e-02, -+-4.34791784576844600463e-02, -+-4.17544736377706837693e-02, -+-4.00128613125346824231e-02, -+-3.82553885302546123337e-02, -+-3.64831070090038678266e-02, -+-3.46970725439699687054e-02, -+-3.28983444147356932086e-02, -+-3.10879847928346199348e-02, -+-2.92670581498969371859e-02, -+-2.74366306667012324616e-02, -+-2.55977696434401616465e-02, -+-2.37515429115148085648e-02, -+-2.18990182471639621697e-02, -+-2.00412627872342125057e-02, -+-1.81793424474003748048e-02, -+-1.63143213431318143125e-02, -+-1.44472612137104394064e-02, -+-1.25792208495948080321e-02, -+-1.07112555234262843418e-02, -+-8.84441642496919776251e-03, -+-6.97975010027273440327e-03, -+-5.11829789534247545785e-03, -+-3.26109540460238272672e-03, -+-1.40917192442717876394e-03, -+ 4.36450087979504280662e-04, -+ 2.27475555008947467189e-03, -+ 4.10473728366783034011e-03, -+ 5.92539653824247346953e-03, -+ 7.73574350816149444027e-03, -+ 9.53479784298774321605e-03, -+ 1.13215891509725555958e-02, -+ 1.30951574953684958535e-02, -+ 1.48545538833333903156e-02, -+ 1.65988407471903930135e-02, -+ 1.83270924178097725787e-02, -+ 2.00383955898867233136e-02, -+ 2.17318497788877018628e-02, -+ 2.34065677694524146291e-02, -+ 2.50616760550354221448e-02, -+ 2.66963152685791259289e-02, -+ 2.83096406040205736399e-02, -+ 2.99008222284305145988e-02, -+ 3.14690456845965957355e-02, -+ 3.30135122838646696830e-02, -+ 3.45334394890581680704e-02, -+ 3.60280612873039099431e-02, -+ 3.74966285525929615696e-02, -+ 3.89384093979178655398e-02, -+ 4.03526895168305685391e-02, -+ 4.17387725142676843659e-02, -+ 4.30959802265037661417e-02, -+ 4.44236530300948923022e-02, -+ 4.57211501396783959184e-02, -+ 4.69878498945072997639e-02, -+ 4.82231500336007049001e-02, -+ 4.94264679593977643290e-02, -+ 5.05972409898094652170e-02, -+ 5.17349265985714082405e-02, -+ 5.28390026438036938816e-02, -+ 5.39089675846917554258e-02, -+ 5.49443406862122687984e-02, -+ 5.59446622118279432434e-02, -+ 5.69094936040880627903e-02, -+ 5.78384176530744725797e-02, -+ 5.87310386526413361064e-02, -+ 5.95869825444026307570e-02, -+ 6.04058970494284683261e-02, -+ 6.11874517876177664855e-02, -+ 6.19313383847234916191e-02, -+ 6.26372705670065754724e-02, -+ 6.33049842435138704344e-02, -+ 6.39342375759682501890e-02, -+ 6.45248110362744708990e-02, -+ 6.50765074516480857003e-02, -+ 6.55891520373845793301e-02, -+ 6.60625924172834749770e-02, -+ 6.64966986317623437452e-02, -+ 6.68913631336883612866e-02, -+ 6.72465007719728613544e-02, -+ 6.75620487629735172463e-02, -+ 6.78379666497569006056e-02, -+ 6.80742362492841729393e-02, -+ 6.82708615875821517305e-02, -+ 6.84278688229765230666e-02, -+ 6.85453061574607669382e-02, -+ 6.86232437362914587942e-02, -+ 6.86617735358941577717e-02, -+ 6.86610092401827576403e-02, -+ 6.86210861053920678776e-02, -+ 6.85421608135311638543e-02, -+ 6.84244113145758836581e-02, -+ 6.82680366575164482290e-02, -+ 6.80732568103898511014e-02, -+ 6.78403124694252068760e-02, -+ 6.75694648574412526365e-02, -+ 6.72609955116377500328e-02, -+ 6.69152060609276150283e-02, -+ 6.65324179929640407982e-02, -+ 6.61129724110185862385e-02, -+ 6.56572297808763333249e-02, -+ 6.51655696679120516324e-02, -+ 6.46383904645234791397e-02, -+ 6.40761091080973010925e-02, -+ 6.34791607896909026998e-02, -+ 6.28479986536143592213e-02, -+ 6.21830934881068692066e-02, -+ 6.14849334072996994704e-02, -+ 6.07540235246672929992e-02, -+ 5.99908856181665117724e-02, -+ 5.91960577872764140417e-02, -+ 5.83700941021449495882e-02, -+ 5.75135642450580880647e-02, -+ 5.66270531444532515541e-02, -+ 5.57111606016933366692e-02, -+ 5.47665009108296851892e-02, -+ 5.37937024715815850784e-02, -+ 5.27934073957626870399e-02, -+ 5.17662711073889059143e-02, -+ 5.07129619367031950206e-02, -+ 4.96341607083598743144e-02, -+ 4.85305603240058919257e-02, -+ 4.74028653395071053467e-02, -+ 4.62517915370636301109e-02, -+ 4.50780654924642990022e-02, -+ 4.38824241377281029641e-02, -+ 4.26656143193894568655e-02, -+ 4.14283923526756400757e-02, -+ 4.01715235718370783369e-02, -+ 3.88957818768817381594e-02, -+ 3.76019492769772492591e-02, -+ 3.62908154307766822599e-02, -+ 3.49631771839265942381e-02, -+ 3.36198381040227756156e-02, -+ 3.22616080132712215733e-02, -+ 3.08893025191169512400e-02, -+ 2.95037425431055044811e-02, -+ 2.81057538482372380739e-02, -+ 2.66961665650768086022e-02, -+ 2.52758147168840839603e-02, -+ 2.38455357440239580635e-02, -+ 2.24061700279218310727e-02, -+ 2.09585604148223095256e-02, -+ 1.95035517396166743764e-02, -+ 1.80419903499945237513e-02, -+ 1.65747236311830255240e-02, -+ 1.51025995315297069388e-02, -+ 1.36264660891878813115e-02, -+ 1.21471709601575494908e-02, -+ 1.06655609479410495855e-02, -+ 9.18248153506075540098e-03, -+ 7.69877641669523653245e-03, -+ 6.21528703667832953944e-03, -+ 4.73285212611389023013e-03, -+ 3.25230724484593071086e-03, -+ 1.77448432603104764606e-03, -+ 3.00211224053546050453e-04, -+-1.16968873398075085164e-03, -+-2.63439719293501574751e-03, -+-4.09310121028114842767e-03, -+-5.54499369246326881400e-03, -+-6.98927382675401144552e-03, -+-8.42514750838012187184e-03, -+-9.85182776269834421801e-03, -+-1.12685351622023224166e-02, -+-1.26744982381468297011e-02, -+-1.40689538865774264181e-02, -+-1.54511477685608713400e-02, -+-1.68203347044119586040e-02, -+-1.81757790617144907031e-02, -+-1.95167551369457396848e-02, -+-2.08425475305089903666e-02, -+-2.21524515149872230912e-02, -+-2.34457733964363347623e-02, -+-2.47218308685369890509e-02, -+-2.59799533594318662888e-02, -+-2.72194823710760064328e-02, -+-2.84397718109379513129e-02, -+-2.96401883158870678436e-02, -+-3.08201115681125577261e-02, -+-3.19789346029227747326e-02, -+-3.31160641082781370681e-02, -+-3.42309207159130005071e-02, -+-3.53229392839145145411e-02, -+-3.63915691706218277779e-02, -+-3.74362744997228866217e-02, -+-3.84565344164232020274e-02, -+-3.94518433345735566875e-02, -+-4.04217111746440760367e-02, -+-4.13656635924379983971e-02, -+-4.22832421984465703368e-02, -+-4.31740047677477145616e-02, -+-4.40375254403603463849e-02, -+-4.48733949119690250784e-02, -+-4.56812206149411689782e-02, -+-4.64606268895620885817e-02, -+-4.72112551454219875335e-02, -+-4.79327640128901638628e-02, -+-4.86248294846227807620e-02, -+-4.92871450470508051800e-02, -+-4.99194218018040730689e-02, -+-5.05213885770312357004e-02, -+-5.10927920285815725943e-02, -+-5.16333967310192848421e-02, -+-5.21429852584503056301e-02, -+-5.26213582551397357490e-02, -+-5.30683344959132635710e-02, -+-5.34837509363331325973e-02, -+-5.38674627526497529217e-02, -+-5.42193433715342787416e-02, -+-5.45392844896020398404e-02, -+-5.48271960827455065446e-02, -+-5.50830064052948084607e-02, -+-5.53066619790379757071e-02, -+-5.54981275721307884541e-02, -+-5.56573861679344195075e-02, -+-5.57844389238277491017e-02, -+-5.58793051200398085965e-02, -+-5.59420220985603691699e-02, -+-5.59726451921854703531e-02, -+-5.59712476437655773176e-02, -+-5.59379205157255615655e-02, -+-5.58727725899317365088e-02, -+-5.57759302579874938210e-02, -+-5.56475374020423893540e-02, -+-5.54877552662062720201e-02, -+-5.52967623186622694864e-02, -+-5.50747541045816801919e-02, -+-5.48219430899443069261e-02, -+-5.45385584963738595521e-02, -+-5.42248461271042508924e-02, -+-5.38810681841958433180e-02, -+-5.35075030771247142636e-02, -+-5.31044452228734698007e-02, -+-5.26722048376558060756e-02, -+-5.22111077204129997442e-02, -+-5.17214950282209942611e-02, -+-5.12037230437547910555e-02, -+-5.06581629349584436350e-02, -+-5.00852005070748507176e-02, -+-4.94852359471897595977e-02, -+-4.88586835614527661975e-02, -+-4.82059715051387852047e-02, -+-4.75275415057165098731e-02, -+-4.68238485790967787215e-02, -+-4.60953607392339606563e-02, -+-4.53425587012589517699e-02, -+-4.45659355783224117586e-02, -+-4.37659965723364227652e-02, -+-4.29432586587956896529e-02, -+-4.20982502658717866462e-02, -+-4.12315109479716793150e-02, -+-4.03435910539542696984e-02, -+-3.94350513902031810098e-02, -+-3.85064628787541649024e-02, -+-3.75584062106811000792e-02, -+-3.65914714949422334445e-02, -+-3.56062579028932485459e-02, -+-3.46033733086755293518e-02, -+-3.35834339256887229319e-02, -+-3.25470639393581201437e-02, -+-3.14948951364113841067e-02, -+-3.04275665308768074324e-02, -+-2.93457239870188353603e-02, -+-2.82500198394295444493e-02, -+-2.71411125104896906735e-02, -+-2.60196661254226829785e-02, -+-2.48863501251557692195e-02, -+-2.37418388772132477049e-02, -+-2.25868112848582602847e-02, -+-2.14219503947065334493e-02, -+-2.02479430030328977352e-02, -+-1.90654792609915822721e-02, -+-1.78752522789717531448e-02, -+-1.66779577303104824260e-02, -+-1.54742934545847657390e-02, -+-1.42649590607015902544e-02, -+-1.30506555300084672172e-02, -+-1.18320848196448689948e-02, -+-1.06099494663520910881e-02, -+-9.38495219096077346044e-03, -+-8.15779550377599728395e-03, -+-6.92918131107302364552e-03, -+-5.69981052292132129439e-03, -+-4.47038266255170985142e-03, -+-3.24159547747867194528e-03, -+-2.01414455258872894527e-03, -+-7.88722925405390719311e-04, -+ 4.33979296259515102616e-04, -+ 1.65327531406484059748e-03, -+ 2.86848201610344138643e-03, -+ 4.07892035086573293695e-03, -+ 5.28391569800646006272e-03, -+ 6.48279823571479112132e-03, -+ 7.67490330449144362440e-03, -+ 8.85957176714050748112e-03, -+ 1.00361503647855877797e-02, -+ 1.12039920687220222878e-02, -+ 1.23624564279179102733e-02, -+ 1.35109099119845744302e-02, -+ 1.46487262494354297110e-02, -+ 1.57752867610552773014e-02, -+ 1.68899806882093564409e-02, -+ 1.79922055159205465658e-02, -+ 1.90813672905472929420e-02, -+ 2.01568809318992299418e-02, -+ 2.12181705396309386313e-02, -+ 2.22646696937574897768e-02, -+ 2.32958217491361675722e-02, -+ 2.43110801237692714105e-02, -+ 2.53099085807794131620e-02, -+ 2.62917815039164816382e-02, -+ 2.72561841664596578305e-02, -+ 2.82026129933784439063e-02, -+ 2.91305758166261995201e-02, -+ 3.00395921234366258812e-02, -+ 3.09291932975059961908e-02, -+ 3.17989228529399620138e-02, -+ 3.26483366608550443222e-02, -+ 3.34770031685240748720e-02, -+ 3.42845036109633918842e-02, -+ 3.50704322148587890884e-02, -+ 3.58343963947392735170e-02, -+ 3.65760169413035240993e-02, -+ 3.72949282018151320739e-02, -+ 3.79907782524846540650e-02, -+ 3.86632290627611160949e-02, -+ 3.93119566514606166852e-02, -+ 3.99366512346636878816e-02, -+ 4.05370173653198731523e-02, -+ 4.11127740644999239983e-02, -+ 4.16636549442422551848e-02, -+ 4.21894083219462659451e-02, -+ 4.26897973262660088145e-02, -+ 4.31645999944682140503e-02, -+ 4.36136093612174424727e-02, -+ 4.40366335387612217733e-02, -+ 4.44334957884889164559e-02, -+ 4.48040345838451384286e-02, -+ 4.51481036645831335097e-02, -+ 4.54655720823471248826e-02, -+ 4.57563242375793044481e-02, -+ 4.60202599077495430602e-02, -+ 4.62572942669144740457e-02, -+ 4.64673578966120978673e-02, -+ 4.66503967881086306635e-02, -+ 4.68063723360144789964e-02, -+ 4.69352613232939530619e-02, -+ 4.70370558976949404428e-02, -+ 4.71117635396342340770e-02, -+ 4.71594070215737987128e-02, -+ 4.71800243589305737246e-02, -+ 4.71736687525673714649e-02, -+ 4.71404085229153516079e-02, -+ 4.70803270357842834626e-02, -+ 4.69935226199208050391e-02, -+ 4.68801084763797309973e-02, -+ 4.67402125797770004456e-02, -+ 4.65739775714988368804e-02, -+ 4.63815606449435313685e-02, -+ 4.61631334228796152974e-02, -+ 4.59188818270049037285e-02, -+ 4.56490059397985786793e-02, -+ 4.53537198587595224986e-02, -+ 4.50332515431300858810e-02, -+ 4.46878426532076045152e-02, -+ 4.43177483823498988280e-02, -+ 4.39232372817854738178e-02, -+ 4.35045910783411482470e-02, -+ 4.30621044852065107400e-02, -+ 4.25960850058553150421e-02, -+ 4.21068527312480900271e-02, -+ 4.15947401304457009541e-02, -+ 4.10600918347645213458e-02, -+ 4.05032644156081075848e-02, -+ 3.99246261561139251239e-02, -+ 3.93245568167555487049e-02, -+ 3.87034473950466154091e-02, -+ 3.80616998794914215831e-02, -+ 3.73997269979330568268e-02, -+ 3.67179519604542980993e-02, -+ 3.60168081969824901978e-02, -+ 3.52967390897612337541e-02, -+ 3.45581977008463520074e-02, -+ 3.38016464947914485606e-02, -+ 3.30275570566867723854e-02, -+ 3.22364098057202272396e-02, -+ 3.14286937044311875944e-02, -+ 3.06049059638265272265e-02, -+ 2.97655517445348863359e-02, -+ 2.89111438541742558905e-02, -+ 2.80422024411093630258e-02, -+ 2.71592546847793693543e-02, -+ 2.62628344827749958534e-02, -+ 2.53534821348480460257e-02, -+ 2.44317440240356988090e-02, -+ 2.34981722950843643916e-02, -+ 2.25533245303600957121e-02, -+ 2.15977634234290963300e-02, -+ 2.06320564504986307675e-02, -+ 1.96567755399048478548e-02, -+ 1.86724967398384719686e-02, -+ 1.76797998844943696217e-02, -+ 1.66792682588392839060e-02, -+ 1.56714882621848752842e-02, -+ 1.46570490707573775069e-02, -+ 1.36365422994567421500e-02, -+ 1.26105616629926826217e-02, -+ 1.15797026365911225748e-02, -+ 1.05445621164599462327e-02, -+ 9.50573808020578961409e-03, -+ 8.46382924739110323320e-03, -+ 7.41943474041982693745e-03, -+ 6.37315374594339158210e-03, -+ 5.32558517697237672472e-03, -+ 4.27732733588230377986e-03, -+ 3.22897757850148679412e-03, -+ 2.18113197946379544154e-03, -+ 1.13438499901297824499e-03, -+ 8.93291514401199637785e-05, -+-9.53445324662180308285e-04, -+-1.99335079414908163467e-03, -+-3.02980255089889101774e-03, -+-4.06221914103327592926e-03, -+-5.09002268361045690642e-03, -+-6.11263918861550906853e-03, -+-7.12949887207463706834e-03, -+-8.14003646812562139945e-03, -+-9.14369153787539246103e-03, -+-1.01399087748766797423e-02, -+-1.11281383070643315192e-02, -+-1.21078359949849043153e-02, -+-1.30784637261652115364e-02, -+-1.40394897054589556235e-02, -+-1.49903887412209321783e-02, -+-1.59306425271560810064e-02, -+-1.68597399196934796817e-02, -+-1.77771772107420643338e-02, -+-1.86824583956837868282e-02, -+-1.95750954364632238913e-02, -+-2.04546085196391988492e-02, -+-2.13205263092617232357e-02, -+-2.21723861944465271134e-02, -+-2.30097345315165013879e-02, -+-2.38321268805886041231e-02, -+-2.46391282364846579689e-02, -+-2.54303132538467105417e-02, -+-2.62052664663464558725e-02, -+-2.69635824998752660075e-02, -+-2.77048662796101873018e-02, -+-2.84287332308504510359e-02, -+-2.91348094735277007850e-02, -+-2.98227320102924450818e-02, -+-3.04921489080843266528e-02, -+-3.11427194730996177718e-02, -+-3.17741144190714572271e-02, -+-3.23860160287801970846e-02, -+-3.29781183087202514614e-02, -+-3.35501271368501066683e-02, -+-3.41017604033561905208e-02, -+-3.46327481443660725735e-02, -+-3.51428326685533573559e-02, -+-3.56317686765738189658e-02, -+-3.60993233732840035355e-02, -+-3.65452765726929293399e-02, -+-3.69694207956033291107e-02, -+-3.73715613599018697810e-02, -+-3.77515164634644601049e-02, -+-3.81091172596444149878e-02, -+-3.84442079253161372865e-02, -+-3.87566457214516685292e-02, -+-3.90463010462121923316e-02, -+-3.93130574805393290250e-02, -+-3.95568118262348833447e-02, -+-3.97774741365262002324e-02, -+-3.99749677391120911141e-02, -+-4.01492292516929735746e-02, -+-4.03002085899928502721e-02, -+-4.04278689682822170437e-02, -+-4.05321868924172351578e-02, -+-4.06131521454162341955e-02, -+-4.06707677655930785465e-02, -+-4.07050500172784421316e-02, -+-4.07160283541586343059e-02, -+-4.07037453752667754969e-02, -+-4.06682567736679767556e-02, -+-4.06096312778803508747e-02, -+-4.05279505860795044581e-02, -+-4.04233092931398294012e-02, -+-4.02958148105644620163e-02, -+-4.01455872793672688403e-02, -+-3.99727594759664850432e-02, -+-3.97774767111586519119e-02, -+-3.95598967222433872681e-02, -+-3.93201895583720484328e-02, -+-3.90585374591997241955e-02, -+-3.87751347269212551239e-02, -+-3.84701875917762628476e-02, -+-3.81439140711113400251e-02, -+-3.77965438220935409652e-02, -+-3.74283179881668356948e-02, -+-3.70394890393534528816e-02, -+-3.66303206065006978220e-02, -+-3.62010873095778978881e-02, -+-3.57520745801320274926e-02, -+-3.52835784780144504080e-02, -+-3.47959055024906621645e-02, -+-3.42893723978519651685e-02, -+-3.37643059536492443073e-02, -+-3.32210427996700446984e-02, -+-3.26599291957861484481e-02, -+-3.20813208167984795227e-02, -+-3.14855825324110299990e-02, -+-3.08730881824660075008e-02, -+-3.02442203475766398235e-02, -+-2.95993701152947666366e-02, -+-2.89389368419537100496e-02, -+-2.82633279103284111577e-02, -+-2.75729584832571511521e-02, -+-2.68682512533715799063e-02, -+-2.61496361890828643570e-02, -+-2.54175502769729139141e-02, -+-2.46724372607451357398e-02, -+-2.39147473768850267473e-02, -+-2.31449370871867204924e-02, -+-2.23634688083034216532e-02, -+-2.15708106384762607344e-02, -+-2.07674360816027074594e-02, -+-1.99538237688046717067e-02, -+-1.91304571776571320785e-02, -+-1.82978243492389613944e-02, -+-1.74564176031696584313e-02, -+-1.66067332507972391376e-02, -+-1.57492713066995013160e-02, -+-1.48845351986653506166e-02, -+-1.40130314763233891628e-02, -+-1.31352695185807718387e-02, -+-1.22517612400427650804e-02, -+-1.13630207965765197414e-02, -+-1.04695642901892153193e-02, -+-9.57190947338527192700e-03, -+-8.67057545317061195700e-03, -+-7.76608239487228645126e-03, -+-6.85895122593805847688e-03, -+-5.94970333988319773771e-03, -+-5.03886030055244581866e-03, -+-4.12694354685914054082e-03, -+-3.21447409816993977597e-03, -+-2.30197226049791555877e-03, -+-1.38995733366734314576e-03, -+-4.78947319613120116137e-04, -+ 4.30541368021724365611e-04, -+ 1.33799419283328071238e-03, -+ 2.24289878298409997917e-03, -+ 3.14474521675841243995e-03, -+ 4.04302630618200674328e-03, -+ 4.93723787855436784672e-03, -+ 5.82687905573941924281e-03, -+ 6.71145253105821966433e-03, -+ 7.59046484363825723490e-03, -+ 8.46342665006433181318e-03, -+ 9.32985299318577973593e-03, -+ 1.01892635679366270335e-02, -+ 1.10411829840201432262e-02, -+ 1.18851410253191149685e-02, -+ 1.27206729058918742437e-02, -+ 1.35473195224164386086e-02, -+ 1.43646277029455919638e-02, -+ 1.51721504518438701781e-02, -+ 1.59694471907719792725e-02, -+ 1.67560839955920790056e-02, -+ 1.75316338290704282210e-02, -+ 1.82956767692504761180e-02, -+ 1.90478002333781711031e-02, -+ 1.97875991972636944283e-02, -+ 2.05146764099610016963e-02, -+ 2.12286426036550797403e-02, -+ 2.19291166986495568436e-02, -+ 2.26157260033451115722e-02, -+ 2.32881064091071711408e-02, -+ 2.39459025799248388655e-02, -+ 2.45887681367592640658e-02, -+ 2.52163658364931847489e-02, -+ 2.58283677453865524731e-02, -+ 2.64244554069528701790e-02, -+ 2.70043200041730317718e-02, -+ 2.75676625159635493856e-02, -+ 2.81141938678234649951e-02, -+ 2.86436350765866577783e-02, -+ 2.91557173892062447551e-02, -+ 2.96501824155063799238e-02, -+ 3.01267822548387659287e-02, -+ 3.05852796165800439043e-02, -+ 3.10254479344173710043e-02, -+ 3.14470714743682391856e-02, -+ 3.18499454364842490839e-02, -+ 3.22338760501942114822e-02, -+ 3.25986806632450124011e-02, -+ 3.29441878242012764488e-02, -+ 3.32702373584682215002e-02, -+ 3.35766804378105562789e-02, -+ 3.38633796433344125276e-02, -+ 3.41302090219154988238e-02, -+ 3.43770541360479547910e-02, -+ 3.46038121071011867125e-02, -+ 3.48103916519715006483e-02, -+ 3.49967131131205394512e-02, -+ 3.51627084819939664251e-02, -+ 3.53083214158219776957e-02, -+ 3.54335072478019763587e-02, -+ 3.55382329906705415890e-02, -+ 3.56224773336756214692e-02, -+ 3.56862306329609538236e-02, -+ 3.57294948953816096648e-02, -+ 3.57522837557707126588e-02, -+ 3.57546224476834179073e-02, -+ 3.57365477676438725307e-02, -+ 3.56981080329308309018e-02, -+ 3.56393630329330246553e-02, -+ 3.55603839741180857703e-02, -+ 3.54612534186531380698e-02, -+ 3.53420652167257473564e-02, -+ 3.52029244326149889921e-02, -+ 3.50439472645631341918e-02, -+ 3.48652609585071091014e-02, -+ 3.46670037157273194794e-02, -+ 3.44493245944778661571e-02, -+ 3.42123834056644454682e-02, -+ 3.39563506026385533709e-02, -+ 3.36814071651815385988e-02, -+ 3.33877444777541942944e-02, -+ 3.30755642020896523103e-02, -+ 3.27450781442136518162e-02, -+ 3.23965081159751852602e-02, -+ 3.20300857911755970653e-02, -+ 3.16460525563882003053e-02, -+ 3.12446593565609519183e-02, -+ 3.08261665354972284880e-02, -+ 3.03908436713170998500e-02, -+ 2.99389694069978791469e-02, -+ 2.94708312760984421363e-02, -+ 2.89867255237756110686e-02, -+ 2.84869569232016131566e-02, -+ 2.79718385874915022316e-02, -+ 2.74416917772590980562e-02, -+ 2.68968457039136660258e-02, -+ 2.63376373288174668585e-02, -+ 2.57644111584257248793e-02, -+ 2.51775190355282320331e-02, -+ 2.45773199267213977859e-02, -+ 2.39641797062345729419e-02, -+ 2.33384709362384548670e-02, -+ 2.27005726437677947394e-02, -+ 2.20508700943889204837e-02, -+ 2.13897545627447401018e-02, -+ 2.07176231001132207798e-02, -+ 2.00348782991160503930e-02, -+ 1.93419280557122104380e-02, -+ 1.86391853286192524242e-02, -+ 1.79270678963008890661e-02, -+ 1.72059981116597301987e-02, -+ 1.64764026545822124536e-02, -+ 1.57387122824750626260e-02, -+ 1.49933615789394694695e-02, -+ 1.42407887007263995321e-02, -+ 1.34814351231214504812e-02, -+ 1.27157453839016106739e-02, -+ 1.19441668260144781555e-02, -+ 1.11671493391258293271e-02, -+ 1.03851451001812210978e-02, -+ 9.59860831313457708858e-03, -+ 8.80799494798568949339e-03, -+ 8.01376247928074769700e-03, -+ 7.21636962422106571780e-03, -+ 6.41627608052837850733e-03, -+ 5.61394226421643282449e-03, -+ 4.80982904741692092465e-03, -+ 4.00439749640451800317e-03, -+ 3.19810860997276008924e-03, -+ 2.39142305830572152181e-03, -+ 1.58480092248966769435e-03, -+ 7.78701434814883992376e-04, -+-2.64172799899629922237e-05, -+-8.30098462447035776932e-04, -+-1.63188697479669402902e-03, -+-2.43132955610078941786e-03, -+-3.22797507584321246785e-03, -+-4.02137478588284608128e-03, -+-4.81108257062173427093e-03, -+-5.59665519525267239620e-03, -+-6.37765255194445643272e-03, -+-7.15363790383393653022e-03, -+-7.92417812668915269581e-03, -+-8.68884394811023953731e-03, -+-9.44721018414002543240e-03, -+-1.01988559731527404090e-02, -+-1.09433650068938154165e-02, -+-1.16803257585482624797e-02, -+-1.24093317077095619677e-02, -+-1.31299815621298259644e-02, -+-1.38418794761330250093e-02, -+-1.45446352655703541046e-02, -+-1.52378646192042489088e-02, -+-1.59211893064089386740e-02, -+-1.65942373810739063344e-02, -+-1.72566433816031643278e-02, -+-1.79080485269053901742e-02, -+-1.85481009082684548950e-02, -+-1.91764556770177840850e-02, -+-1.97927752278625780635e-02, -+-2.03967293778293395912e-02, -+-2.09879955406921600569e-02, -+-2.15662588968082193086e-02, -+-2.21312125582700525150e-02, -+-2.26825577292899260851e-02, -+-2.32200038617330316304e-02, -+-2.37432688057198117149e-02, -+-2.42520789552232059194e-02, -+-2.47461693885826818085e-02, -+-2.52252840038678892431e-02, -+-2.56891756490234268728e-02, -+-2.61376062467286660040e-02, -+-2.65703469139121004061e-02, -+-2.69871780758624488228e-02, -+-2.73878895748791845177e-02, -+-2.77722807734117477230e-02, -+-2.81401606516388999579e-02, -+-2.84913478994407130818e-02, -+-2.88256710027211988934e-02, -+-2.91429683240446539549e-02, -+-2.94430881775452554794e-02, -+-2.97258888980813616720e-02, -+-2.99912389046026704731e-02, -+-3.02390167577045836100e-02, -+-3.04691112113477519108e-02, -+-3.06814212587221760153e-02, -+-3.08758561722402014027e-02, -+-3.10523355376465907962e-02, -+-3.12107892822333435334e-02, -+-3.13511576971570726791e-02, -+-3.14733914538524867099e-02, -+-3.15774516145448311266e-02, -+-3.16633096368639233020e-02, -+-3.17309473725677151923e-02, -+-3.17803570603852336696e-02, -+-3.18115413129928040203e-02, -+-3.18245130981409940496e-02, -+-3.18192957139523252552e-02, -+-3.17959227584129339172e-02, -+-3.17544380930855907330e-02, -+-3.16948958010739717528e-02, -+-3.16173601392711264846e-02, -+-3.15219054849285862385e-02, -+-3.14086162765858309398e-02, -+-3.12775869494028441187e-02, -+-3.11289218649403939820e-02, -+-3.09627352354390518452e-02, -+-3.07791510426457977367e-02, -+-3.05783029512460211019e-02, -+-3.03603342169560183605e-02, -+-3.01253975893385171625e-02, -+-2.98736552094041353522e-02, -+-2.96052785020640661651e-02, -+-2.93204480635056198568e-02, -+-2.90193535435597504968e-02, -+-2.87021935231378082232e-02, -+-2.83691753868116139370e-02, -+-2.80205151906207892976e-02, -+-2.76564375251866501060e-02, -+-2.72771753742177547331e-02, -+-2.68829699684970599427e-02, -+-2.64740706354380586629e-02, -+-2.60507346443026310823e-02, -+-2.56132270471758974328e-02, -+-2.51618205157945855344e-02, -+-2.46967951743263178233e-02, -+-2.42184384282035404523e-02, -+-2.37270447891129755702e-02, -+-2.32229156962464287906e-02, -+-2.27063593339205324617e-02, -+-2.21776904456732447402e-02, -+-2.16372301449491780123e-02, -+-2.10853057224852889762e-02, -+-2.05222504505109502870e-02, -+-1.99484033838788939186e-02, -+-1.93641091582448833519e-02, -+-1.87697177854121780016e-02, -+-1.81655844459648781186e-02, -+-1.75520692793087393357e-02, -+-1.69295371712437116296e-02, -+-1.62983575391910488761e-02, -+-1.56589041152024530112e-02, -+-1.50115547268741284653e-02, -+-1.43566910762958008241e-02, -+-1.36946985171622712812e-02, -+-1.30259658301738225072e-02, -+-1.23508849968591849500e-02, -+-1.16698509719491937131e-02, -+-1.09832614544311153726e-02, -+-1.02915166574176798753e-02, -+-9.59501907696169199780e-03, -+-8.89417325994698755587e-03, -+-8.18938557119236638926e-03, -+-7.48106395989599822632e-03, -+-6.76961772555855368499e-03, -+-6.05545728351598779721e-03, -+-5.33899393021318099950e-03, -+-4.62063960835571319735e-03, -+-3.90080667206999139041e-03, -+-3.17990765220415401091e-03, -+-2.45835502190418740687e-03, -+-1.73656096259670639399e-03, -+-1.01493713050778409414e-03, -+-2.93894423852804689834e-04, -+ 4.26157249173980906629e-04, -+ 1.14480920148214617565e-03, -+ 1.86165419710703351590e-03, -+ 2.57628668004443710932e-03, -+ 3.28830300177243139287e-03, -+ 3.99730164732982774095e-03, -+ 4.70288345982820387564e-03, -+ 5.40465186327331818111e-03, -+ 6.10221308357093879249e-03, -+ 6.79517636759518171841e-03, -+ 7.48315420020127710504e-03, -+ 8.16576251905792339925e-03, -+ 8.84262092718743515640e-03, -+ 9.51335290309166317635e-03, -+ 1.01775860083515076043e-02, -+ 1.08349520925866381338e-02, -+ 1.14850874956621031020e-02, -+ 1.21276332470322649459e-02, -+ 1.27622352621157286734e-02, -+ 1.33885445355916270910e-02, -+ 1.40062173315140241908e-02, -+ 1.46149153701442997833e-02, -+ 1.52143060113965177677e-02, -+ 1.58040624348002624322e-02, -+ 1.63838638158842961334e-02, -+ 1.69533954988862062274e-02, -+ 1.75123491656954573259e-02, -+ 1.80604230009418498248e-02, -+ 1.85973218531409432985e-02, -+ 1.91227573918102446149e-02, -+ 1.96364482604763183893e-02, -+ 2.01381202254901497950e-02, -+ 2.06275063205740884220e-02, -+ 2.11043469870254470078e-02, -+ 2.15683902095024221390e-02, -+ 2.20193916473261919187e-02, -+ 2.24571147612263599669e-02, -+ 2.28813309354701996390e-02, -+ 2.32918195953102993845e-02, -+ 2.36883683196934501092e-02, -+ 2.40707729491726543647e-02, -+ 2.44388376889697125915e-02, -+ 2.47923752071377255513e-02, -+ 2.51312067277732788251e-02, -+ 2.54551621192373560276e-02, -+ 2.57640799773376678872e-02, -+ 2.60578077034374286369e-02, -+ 2.63362015774511563915e-02, -+ 2.65991268256962030969e-02, -+ 2.68464576835671930866e-02, -+ 2.70780774530085012464e-02, -+ 2.72938785547578652291e-02, -+ 2.74937625753404746298e-02, -+ 2.76776403087958637605e-02, -+ 2.78454317931197334324e-02, -+ 2.79970663414113134226e-02, -+ 2.81324825677129637669e-02, -+ 2.82516284075390901320e-02, -+ 2.83544611330882809219e-02, -+ 2.84409473631392593906e-02, -+ 2.85110630676332979516e-02, -+ 2.85647935669472025078e-02, -+ 2.86021335258679100522e-02, -+ 2.86230869422767590649e-02, -+ 2.86276671305612032126e-02, -+ 2.86158966997688939127e-02, -+ 2.85878075265257568238e-02, -+ 2.85434407227408461216e-02, -+ 2.84828465981240355753e-02, -+ 2.84060846175463004026e-02, -+ 2.83132233532735408388e-02, -+ 2.82043404321091033260e-02, -+ 2.80795224774836003900e-02, -+ 2.79388650465300265868e-02, -+ 2.77824725621904008999e-02, -+ 2.76104582403968873416e-02, -+ 2.74229440123787519823e-02, -+ 2.72200604421439854019e-02, -+ 2.70019466391913931513e-02, -+ 2.67687501665088492531e-02, -+ 2.65206269439171582469e-02, -+ 2.62577411468211084633e-02, -+ 2.59802651004316341454e-02, -+ 2.56883791695271083977e-02, -+ 2.53822716438199466604e-02, -+ 2.50621386190043350661e-02, -+ 2.47281838735542228158e-02, -+ 2.43806187413515146334e-02, -+ 2.40196619802195698856e-02, -+ 2.36455396364462083758e-02, -+ 2.32584849053751770154e-02, -+ 2.28587379881527788528e-02, -+ 2.24465459447181145403e-02, -+ 2.20221625431206817491e-02, -+ 2.15858481052626192953e-02, -+ 2.11378693491531578774e-02, -+ 2.06784992277722831644e-02, -+ 2.02080167646385595870e-02, -+ 1.97267068861813506253e-02, -+ 1.92348602510139590760e-02, -+ 1.87327730762112433516e-02, -+ 1.82207469606941833973e-02, -+ 1.76990887058239218521e-02, -+ 1.71681101333155360089e-02, -+ 1.66281279005709090035e-02, -+ 1.60794633135482208097e-02, -+ 1.55224421372705916056e-02, -+ 1.49573944040871566891e-02, -+ 1.43846542198004401919e-02, -+ 1.38045595677690705744e-02, -+ 1.32174521111029039805e-02, -+ 1.26236769930632777847e-02, -+ 1.20235826357873512582e-02, -+ 1.14175205374468860531e-02, -+ 1.08058450679664186378e-02, -+ 1.01889132634121089283e-02, -+ 9.56708461917343822023e-03, -+ 8.94072088205428300300e-03, -+ 8.31018584139599399141e-03, -+ 7.67584511934790540699e-03, -+ 7.03806596040880416698e-03, -+ 6.39721702035818493709e-03, -+ 5.75366815469682043455e-03, -+ 5.10779020672127558739e-03, -+ 4.45995479534525007814e-03, -+ 3.81053410279771258631e-03, -+ 3.15990066231072903868e-03, -+ 2.50842714592023827147e-03, -+ 1.85648615250139353144e-03, -+ 1.20444999615454471746e-03, -+ 5.52690495064260415084e-04, -+-9.84212390521464980473e-05, -+-7.48515010783776918966e-04, -+-1.39722175004304473983e-03, -+-2.04417372013348868851e-03, -+-2.68900472475985721083e-03, -+-3.33135031386035986023e-03, -+-3.97084798814866836436e-03, -+-4.60713740224857979527e-03, -+-5.23986056631194768718e-03, -+-5.86866204600630658739e-03, -+-6.49318916075832062301e-03, -+-7.11309218015082015546e-03, -+-7.72802451835431433724e-03, -+-8.33764292649709012895e-03, -+-8.94160768285747094286e-03, -+-9.53958278078098804997e-03, -+-1.01312361142165130445e-02, -+-1.07162396607681370542e-02, -+-1.12942696621660988721e-02, -+-1.18650068020553327297e-02, -+-1.24281363810071557308e-02, -+-1.29833484886548687631e-02, -+-1.35303381728667914546e-02, -+-1.40688056058569672252e-02, -+-1.45984562471500062958e-02, -+-1.51190010033104265535e-02, -+-1.56301563843482677063e-02, -+-1.61316446567209455243e-02, -+-1.66231939928469449330e-02, -+-1.71045386170529077619e-02, -+-1.75754189478743681752e-02, -+-1.80355817366393243739e-02, -+-1.84847802022550938839e-02, -+-1.89227741621333586663e-02, -+-1.93493301591808192219e-02, -+-1.97642215847910959758e-02, -+-2.01672287977736237885e-02, -+-2.05581392391563748390e-02, -+-2.09367475428056254438e-02, -+-2.13028556418044003051e-02, -+-2.16562728705364630766e-02, -+-2.19968160624214870147e-02, -+-2.23243096432573610854e-02, -+-2.26385857201165559272e-02, -+-2.29394841657579208472e-02, -+-2.32268526985093780313e-02, -+-2.35005469575834645413e-02, -+-2.37604305737897300577e-02, -+-2.40063752356104789798e-02, -+-2.42382607506086561466e-02, -+-2.44559751021389444603e-02, -+-2.46594145013394015764e-02, -+-2.48484834343765149944e-02, -+-2.50230947049280248728e-02, -+-2.51831694718824584955e-02, -+-2.53286372822437155783e-02, -+-2.54594360992264553967e-02, -+-2.55755123255348194855e-02, -+-2.56768208218174157076e-02, -+-2.57633249202947785250e-02, -+-2.58349964335584103559e-02, -+-2.58918156585436348704e-02, -+-2.59337713756803804610e-02, -+-2.59608608432293705426e-02, -+-2.59730897868132928896e-02, -+-2.59704723841564268094e-02, -+-2.59530312450472130936e-02, -+-2.59207973865424462501e-02, -+-2.58738102034334269130e-02, -+-2.58121174339979962686e-02, -+-2.57357751210636476191e-02, -+-2.56448475684109972184e-02, -+-2.55394072925489191983e-02, -+-2.54195349698946651551e-02, -+-2.52853193793951269708e-02, -+-2.51368573406296827444e-02, -+-2.49742536474338513997e-02, -+-2.47976209970892889911e-02, -+-2.46070799151258470805e-02, -+-2.44027586757840746212e-02, -+-2.41847932181901530135e-02, -+-2.39533270582963850326e-02, -+-2.37085111966422665275e-02, -+-2.34505040219958535430e-02, -+-2.31794712109343950535e-02, -+-2.28955856234271913630e-02, -+-2.25990271944861188802e-02, -+-2.22899828219497650461e-02, -+-2.19686462504703923504e-02, -+-2.16352179517750840831e-02, -+-2.12899050012748461413e-02, -+-2.09329209510937253036e-02, -+-2.05644856995994759763e-02, -+-2.01848253575104240320e-02, -+-1.97941721106610450664e-02, -+-1.93927640795097180892e-02, -+-1.89808451754700721614e-02, -+-1.85586649541545842257e-02, -+-1.81264784656151936582e-02, -+-1.76845461016740639060e-02, -+-1.72331334404288091799e-02, -+-1.67725110880316378992e-02, -+-1.63029545178296972341e-02, -+-1.58247439069643912324e-02, -+-1.53381639705272194985e-02, -+-1.48435037933645017777e-02, -+-1.43410566596358455410e-02, -+-1.38311198802215200299e-02, -+-1.33139946180815798432e-02, -+-1.27899857116674387641e-02, -+-1.22594014964915645066e-02, -+-1.17225536249535751410e-02, -+-1.11797568845337768478e-02, -+-1.06313290144546303273e-02, -+-1.00775905209177212701e-02, -+-9.51886449102469674177e-03, -+-8.95547640548645211556e-03, -+-8.38775395023088309043e-03, -+-7.81602682701561073120e-03, -+-7.24062656315801675411e-03, -+-6.66188632048521009454e-03, -+-6.08014070362140109788e-03, -+-5.49572556771589591090e-03, -+-4.90897782572374818955e-03, -+-4.32023525535186938423e-03, -+-3.72983630577348361859e-03, -+-3.13811990422953454236e-03, -+-2.54542526261991586267e-03, -+-1.95209168419812327012e-03, -+-1.35845837047655643853e-03, -+-7.64864228454678000274e-04, -+-1.71647678275262160000e-04, -+ 4.20853538580006714207e-04, -+ 1.01230255044841479378e-03, -+ 1.60236354589089790082e-03, -+ 2.19070196323387957060e-03, -+ 2.77698467914542839949e-03, -+ 3.36088019613725542609e-03, -+ 3.94205882888990985502e-03, -+ 4.52019288929302043289e-03, -+ 5.09495687010455642479e-03, -+ 5.66602762711795274880e-03, -+ 6.23308455974283786433e-03, -+ 6.79580978989625592024e-03, -+ 7.35388833910371412378e-03, -+ 7.90700830371526483531e-03, -+ 8.45486102813735630745e-03, -+ 8.99714127598559912369e-03, -+ 9.53354739906401085769e-03, -+ 1.00637815040785765647e-02, -+ 1.05875496169915012112e-02, -+ 1.11045618449284663742e-02, -+ 1.16145325355499640790e-02, -+ 1.21171804337962679687e-02, -+ 1.26122288359273460739e-02, -+ 1.30994057407662432141e-02, -+ 1.35784439980698272421e-02, -+ 1.40490814539434016872e-02, -+ 1.45110610932224059350e-02, -+ 1.49641311787415132173e-02, -+ 1.54080453874216524723e-02, -+ 1.58425629430952868981e-02, -+ 1.62674487460044807363e-02, -+ 1.66824734989000737773e-02, -+ 1.70874138296747413168e-02, -+ 1.74820524104663498066e-02, -+ 1.78661780731680860934e-02, -+ 1.82395859212837498087e-02, -+ 1.86020774380712544671e-02, -+ 1.89534605909168415994e-02, -+ 1.92935499318850137151e-02, -+ 1.96221666943946111694e-02, -+ 1.99391388859692132718e-02, -+ 2.02443013770143460939e-02, -+ 2.05374959855790205354e-02, -+ 2.08185715580545618875e-02, -+ 2.10873840457748047694e-02, -+ 2.13437965774761310989e-02, -+ 2.15876795275838501142e-02, -+ 2.18189105802902433284e-02, -+ 2.20373747893947494192e-02, -+ 2.22429646338771422331e-02, -+ 2.24355800691775179867e-02, -+ 2.26151285741611890456e-02, -+ 2.27815251937450065356e-02, -+ 2.29346925771693951890e-02, -+ 2.30745610118978684844e-02, -+ 2.32010684531324534730e-02, -+ 2.33141605489318240463e-02, -+ 2.34137906609261335633e-02, -+ 2.34999198806205046586e-02, -+ 2.35725170412852368107e-02, -+ 2.36315587254308061282e-02, -+ 2.36770292678692914623e-02, -+ 2.37089207543672679523e-02, -+ 2.37272330158955317703e-02, -+ 2.37319736184848778526e-02, -+ 2.37231578487003234856e-02, -+ 2.37008086947469512329e-02, -+ 2.36649568232238372012e-02, -+ 2.36156405515453339528e-02, -+ 2.35529058160507051567e-02, -+ 2.34768061358264293337e-02, -+ 2.33874025722661145477e-02, -+ 2.32847636843980104748e-02, -+ 2.31689654800100834631e-02, -+ 2.30400913626058086170e-02, -+ 2.28982320742268929958e-02, -+ 2.27434856341802542345e-02, -+ 2.25759572737094099670e-02, -+ 2.23957593666531708243e-02, -+ 2.22030113561352687723e-02, -+ 2.19978396773321642488e-02, -+ 2.17803776763693009155e-02, -+ 2.15507655253935614947e-02, -+ 2.13091501338791566855e-02, -+ 2.10556850562188986598e-02, -+ 2.07905303956600374937e-02, -+ 2.05138527046431831669e-02, -+ 2.02258248816056598884e-02, -+ 1.99266260643129536345e-02, -+ 1.96164415197817541825e-02, -+ 1.92954625308645287551e-02, -+ 1.89638862795599161259e-02, -+ 1.86219157271243600238e-02, -+ 1.82697594910530766721e-02, -+ 1.79076317190069930763e-02, -+ 1.75357519597588440430e-02, -+ 1.71543450312383258249e-02, -+ 1.67636408857523670768e-02, -+ 1.63638744724620595339e-02, -+ 1.59552855971977040894e-02, -+ 1.55381187796942588780e-02, -+ 1.51126231083333045085e-02, -+ 1.46790520924749527676e-02, -+ 1.42376635124681055061e-02, -+ 1.37887192674271304160e-02, -+ 1.33324852208636900064e-02, -+ 1.28692310442640404228e-02, -+ 1.23992300587048714933e-02, -+ 1.19227590745975605552e-02, -+ 1.14400982296555958628e-02, -+ 1.09515308251813669321e-02, -+ 1.04573431607620833533e-02, -+ 9.95782436747753331441e-03, -+ 9.45326623971061603957e-03, -+ 8.94396306566137833105e-03, -+ 8.43021145666009164010e-03, -+ 7.91231017538069313078e-03, -+ 7.39055996305047670919e-03, -+ 6.86526336575661762229e-03, -+ 6.33672455995178390137e-03, -+ 5.80524917725282890713e-03, -+ 5.27114412864063391212e-03, -+ 4.73471742815538901294e-03, -+ 4.19627801619143914885e-03, -+ 3.65613558249144616347e-03, -+ 3.11460038894114266822e-03, -+ 2.57198309226452578868e-03, -+ 2.02859456672282133238e-03, -+ 1.48474572691466213253e-03, -+ 9.40747350779479814438e-04, -+ 3.96909902906757746776e-04, -+-1.46456641755227459385e-04, -+-6.89042973683567970891e-04, -+-1.23054062396519788870e-03, -+-1.77064213877926087543e-03, -+-2.30904125308122910865e-03, -+-2.84543306338863035906e-03, -+-3.37951419957442612471e-03, -+-3.91098299557036087337e-03, -+-4.43953965888237763598e-03, -+-4.96488643882942240482e-03, -+-5.48672779340401636783e-03, -+-6.00477055466794654159e-03, -+-6.51872409258721658559e-03, -+-7.02830047721765636265e-03, -+-7.53321463914807636086e-03, -+-8.03318452811570618555e-03, -+-8.52793126970340098492e-03, -+-9.01717932003300026711e-03, -+-9.50065661837041358639e-03, -+-9.97809473755507415904e-03, -+-1.04492290321770483347e-02, -+-1.09137987844132033910e-02, -+-1.13715473474486038208e-02, -+-1.18222222864012831839e-02, -+-1.22655755166751010560e-02, -+-1.27013634396638160073e-02, -+-1.31293470757343818528e-02, -+-1.35492921944166400117e-02, -+-1.39609694417272556244e-02, -+-1.43641544645633414262e-02, -+-1.47586280320936603927e-02, -+-1.51441761540860777430e-02, -+-1.55205901961063368055e-02, -+-1.58876669915270080091e-02, -+-1.62452089502858505743e-02, -+-1.65930241643379994265e-02, -+-1.69309265097449777870e-02, -+-1.72587357453450260247e-02, -+-1.75762776079578519894e-02, -+-1.78833839040674798249e-02, -+-1.81798925979421467647e-02, -+-1.84656478961397856053e-02, -+-1.87405003283600303521e-02, -+-1.90043068245987142872e-02, -+-1.92569307885670955305e-02, -+-1.94982421673372645354e-02, -+-1.97281175171806696933e-02, -+-1.99464400655660206718e-02, -+-2.01530997692852438530e-02, -+-2.03479933686821802541e-02, -+-2.05310244379545009386e-02, -+-2.07021034315073952647e-02, -+-2.08611477263374693603e-02, -+-2.10080816604267042735e-02, -+-2.11428365671300945439e-02, -+-2.12653508055429402157e-02, -+-2.13755697868347541157e-02, -+-2.14734459965394662573e-02, -+-2.15589390127965130350e-02, -+-2.16320155205337663618e-02, -+-2.16926493215929237779e-02, -+-2.17408213407943202988e-02, -+-2.17765196279432124427e-02, -+-2.17997393557822147225e-02, -+-2.18104828138950025684e-02, -+-2.18087593985702259125e-02, -+-2.17945855986363228041e-02, -+-2.17679849772805522612e-02, -+-2.17289881498666827275e-02, -+-2.16776327577697588977e-02, -+-2.16139634382471537699e-02, -+-2.15380317903683393688e-02, -+-2.14498963370269787876e-02, -+-2.13496224830621826596e-02, -+-2.12372824695176258547e-02, -+-2.11129553240687953264e-02, -+-2.09767268076514190600e-02, -+-2.08286893573265061153e-02, -+-2.06689420254178614356e-02, -+-2.04975904149630808182e-02, -+-2.03147466115173279400e-02, -+-2.01205291113544029735e-02, -+-1.99150627461096366155e-02, -+-1.96984786039120784995e-02, -+-1.94709139470550414430e-02, -+-1.92325121262560613800e-02, -+-1.89834224915587240767e-02, -+-1.87238002999316095754e-02, -+-1.84538066196213920711e-02, -+-1.81736082313160018931e-02, -+-1.78833775261818227198e-02, -+-1.75832924008327562415e-02, -+-1.72735361492968621244e-02, -+-1.69542973520454935688e-02, -+-1.66257697621504420271e-02, -+-1.62881521886383481834e-02, -+-1.59416483771111401613e-02, -+-1.55864668877057875596e-02, -+-1.52228209704614383946e-02, -+-1.48509284381741404196e-02, -+-1.44710115368087768872e-02, -+-1.40832968135484268984e-02, -+-1.36880149825567599964e-02, -+-1.32854007885348044532e-02, -+-1.28756928681500511930e-02, -+-1.24591336094203239404e-02, -+-1.20359690091351341501e-02, -+-1.16064485283965002776e-02, -+-1.11708249463664966578e-02, -+-1.07293542123018670331e-02, -+-1.02822952959679969620e-02, -+-9.82991003651416048181e-03, -+-9.37246298989989796990e-03, -+-8.91022127496175937733e-03, -+-8.44345441820766075269e-03, -+-7.97243419742989060939e-03, -+-7.49743448422606276194e-03, -+-7.01873108552144003153e-03, -+-6.53660158417858263430e-03, -+-6.05132517879274946238e-03, -+-5.56318252275954730490e-03, -+-5.07245556271012591060e-03, -+-4.57942737640496932289e-03, -+-4.08438201018109132978e-03, -+-3.58760431604305358652e-03, -+-3.08937978849174819246e-03, -+-2.58999440118657569057e-03, -+-2.08973444352780410305e-03, -+-1.58888635726068356765e-03, -+-1.08773657318487516898e-03, -+-5.86571348070346666216e-04, -+-8.56766018661410432358e-05, -+ 4.14662244703500838458e-04, -+ 9.14160432062568030845e-04, -+ 1.41253402313765564872e-03, -+ 1.90950006404986844660e-03, -+ 2.40477674405564865318e-03, -+ 2.89808355464306636670e-03, -+ 3.38914144770032432427e-03, -+ 3.87767299266011901057e-03, -+ 4.36340253253783821180e-03, -+ 4.84605633877375780588e-03, -+ 5.32536276479152106272e-03, -+ 5.80105239818985360389e-03, -+ 6.27285821148045302093e-03, -+ 6.74051571128982465742e-03, -+ 7.20376308593877450609e-03, -+ 7.66234135132374139660e-03, -+ 8.11599449501146374963e-03, -+ 8.56446961847351709296e-03, -+ 9.00751707737854762081e-03, -+ 9.44489061986596677156e-03, -+ 9.87634752272530808126e-03, -+ 1.03016487254043390825e-02, -+ 1.07205589617752304610e-02, -+ 1.11328468895841945635e-02, -+ 1.15382852175153500368e-02, -+ 1.19366508297968510616e-02, -+ 1.23277249082861840856e-02, -+ 1.27112930519620286746e-02, -+ 1.30871453937629941139e-02, -+ 1.34550767147076835023e-02, -+ 1.38148865552336977403e-02, -+ 1.41663793236976622014e-02, -+ 1.45093644019762355729e-02, -+ 1.48436562481129210450e-02, -+ 1.51690744959529933561e-02, -+ 1.54854440517186581205e-02, -+ 1.57925951874666216368e-02, -+ 1.60903636313842884897e-02, -+ 1.63785906548734767896e-02, -+ 1.66571231563775630502e-02, -+ 1.69258137419078108499e-02, -+ 1.71845208022262455061e-02, -+ 1.74331085866468830925e-02, -+ 1.76714472734152173994e-02, -+ 1.78994130366322383441e-02, -+ 1.81168881096860183433e-02, -+ 1.83237608451629584161e-02, -+ 1.85199257712043326152e-02, -+ 1.87052836442837197573e-02, -+ 1.88797414983780387221e-02, -+ 1.90432126905080711943e-02, -+ 1.91956169426277314938e-02, -+ 1.93368803798427274510e-02, -+ 1.94669355649397177177e-02, -+ 1.95857215292121362993e-02, -+ 1.96931837995691326471e-02, -+ 1.97892744219159630314e-02, -+ 1.98739519807974267251e-02, -+ 1.99471816152978105585e-02, -+ 2.00089350311917421599e-02, -+ 2.00591905093446473685e-02, -+ 2.00979329103609591356e-02, -+ 2.01251536754834259302e-02, -+ 2.01408508237461286727e-02, -+ 2.01450289453875622248e-02, -+ 2.01376991915322746396e-02, -+ 2.01188792601508376068e-02, -+ 2.00885933783103917682e-02, -+ 2.00468722807307861422e-02, -+ 1.99937531846619727383e-02, -+ 1.99292797611018770998e-02, -+ 1.98535021023752838998e-02, -+ 1.97664766860958553141e-02, -+ 1.96682663355367028102e-02, -+ 1.95589401764357864733e-02, -+ 1.94385735902649521567e-02, -+ 1.93072481639931514685e-02, -+ 1.91650516363770367922e-02, -+ 1.90120778408122484415e-02, -+ 1.88484266447838007263e-02, -+ 1.86742038859517046900e-02, -+ 1.84895213049142380368e-02, -+ 1.82944964746886706841e-02, -+ 1.80892527269562349013e-02, -+ 1.78739190751135354485e-02, -+ 1.76486301341811334387e-02, -+ 1.74135260376162073759e-02, -+ 1.71687523510813504213e-02, -+ 1.69144599832216704915e-02, -+ 1.66508050935038308393e-02, -+ 1.63779489971747002630e-02, -+ 1.60960580673943053076e-02, -+ 1.58053036346042924398e-02, -+ 1.55058618831906466079e-02, -+ 1.51979137455046566657e-02, -+ 1.48816447933020276628e-02, -+ 1.45572451266690657684e-02, -+ 1.42249092604983910781e-02, -+ 1.38848360085833399946e-02, -+ 1.35372283653998979475e-02, -+ 1.31822933856448436252e-02, -+ 1.28202420616024131972e-02, -+ 1.24512891984102161413e-02, -+ 1.20756532873008502055e-02, -+ 1.16935563768882661712e-02, -+ 1.13052239425808411649e-02, -+ 1.09108847541921957086e-02, -+ 1.05107707418293280094e-02, -+ 1.01051168601380188944e-02, -+ 9.69416095097974661599e-03, -+ 9.27814360462589186873e-03, -+ 8.85730801954525207020e-03, -+ 8.43189986086877521498e-03, -+ 8.00216711761173211948e-03, -+ 7.56835995873902413200e-03, -+ 7.13073058815158738327e-03, -+ 6.68953309868379475400e-03, -+ 6.24502332519116971910e-03, -+ 5.79745869681476747037e-03, -+ 5.34709808850850412676e-03, -+ 4.89420167191210314650e-03, -+ 4.43903076565723645613e-03, -+ 3.98184768519108632512e-03, -+ 3.52291559220632970878e-03, -+ 3.06249834375802321845e-03, -+ 2.60086034116042237249e-03, -+ 2.13826637874443706636e-03, -+ 1.67498149256396322397e-03, -+ 1.21127080913929915072e-03, -+ 7.47399394318058719021e-04, -+ 2.83632102346346049587e-04, -+-1.79766574769843468212e-04, -+-6.42532657524515324506e-04, -+-1.10440282870957989618e-03, -+-1.56511458266390263150e-03, -+-2.02440637389199361643e-03, -+-2.48201776496643914185e-03, -+-2.93768957363143169009e-03, -+-3.39116401902536928475e-03, -+-3.84218486693827703318e-03, -+-4.29049757402515802296e-03, -+-4.73584943089246784842e-03, -+-5.17798970397907992042e-03, -+-5.61666977614957031034e-03, -+-6.05164328592657299599e-03, -+-6.48266626527806404806e-03, -+-6.90949727588800570455e-03, -+-7.33189754383248466774e-03, -+-7.74963109258556843290e-03, -+-8.16246487428337087755e-03, -+-8.57016889917199681248e-03, -+-8.97251636316816550409e-03, -+-9.36928377346218227428e-03, -+-9.76025107209459868995e-03, -+-1.01452017574365904035e-02, -+-1.05239230035099728261e-02, -+-1.08962057770798960432e-02, -+-1.12618449524549517349e-02, -+-1.16206394239357687498e-02, -+-1.19723922158460008985e-02, -+-1.23169105900894394756e-02, -+-1.26540061511731961180e-02, -+-1.29834949486409296365e-02, -+-1.33051975768588605364e-02, -+-1.36189392721043061457e-02, -+-1.39245500069003491639e-02, -+-1.42218645815492452517e-02, -+-1.45107227128146703404e-02, -+-1.47909691197041746891e-02, -+-1.50624536063089509152e-02, -+-1.53250311416544826582e-02, -+-1.55785619365223330923e-02, -+-1.58229115171997537781e-02, -+-1.60579507961227489765e-02, -+-1.62835561393713836031e-02, -+-1.64996094309859363258e-02, -+-1.67059981340693386453e-02, -+-1.69026153486439532914e-02, -+-1.70893598662360153562e-02, -+-1.72661362211572987080e-02, -+-1.74328547384603599335e-02, -+-1.75894315785435489952e-02, -+-1.77357887783837660234e-02, -+-1.78718542893771675795e-02, -+-1.79975620117707353629e-02, -+-1.81128518256681338150e-02, -+-1.82176696185966900676e-02, -+-1.83119673096232941922e-02, -+-1.83957028700091167195e-02, -+-1.84688403403957639159e-02, -+-1.85313498445167090800e-02, -+-1.85832075994299093791e-02, -+-1.86243959222697728906e-02, -+-1.86549032335186701359e-02, -+-1.86747240567995964611e-02, -+-1.86838590151944261564e-02, -+-1.86823148240932573882e-02, -+-1.86701042805831954330e-02, -+-1.86472462493857613075e-02, -+-1.86137656453560576542e-02, -+-1.85696934125556128992e-02, -+-1.85150664999163827584e-02, -+-1.84499278335122293693e-02, -+-1.83743262854581951293e-02, -+-1.82883166394587175219e-02, -+-1.81919595530277734829e-02, -+-1.80853215164069915100e-02, -+-1.79684748082077037912e-02, -+-1.78414974478062274277e-02, -+-1.77044731445240056955e-02, -+-1.75574912436227900669e-02, -+-1.74006466691516183121e-02, -+-1.72340398636801027388e-02, -+-1.70577767249556339069e-02, -+-1.68719685395252033677e-02, -+-1.66767319133613971249e-02, -+-1.64721886995365836281e-02, -+-1.62584659229890703125e-02, -+-1.60356957024269768108e-02, -+-1.58040151694183554631e-02, -+-1.55635663847157393325e-02, -+-1.53144962518665349316e-02, -+-1.50569564281600679762e-02, -+-1.47911032329673657743e-02, -+-1.45170975535258116318e-02, -+-1.42351047482265624655e-02, -+-1.39452945474637136913e-02, -+-1.36478409521007416211e-02, -+-1.33429221296188608992e-02, -+-1.30307203080056444033e-02, -+-1.27114216674486905923e-02, -+-1.23852162298968091619e-02, -+-1.20522977465561034055e-02, -+-1.17128635833847836306e-02, -+-1.13671146046554968900e-02, -+-1.10152550546535922538e-02, -+-1.06574924375795083986e-02, -+-1.02940373957274844408e-02, -+-9.92510358600978345733e-03, -+-9.55090755489973984582e-03, -+-9.17166861186629808755e-03, -+-8.78760870137362294641e-03, -+-8.39895227351954501427e-03, -+-8.00592615338992057150e-03, -+-7.60875940920200354023e-03, -+-7.20768321931454427481e-03, -+-6.80293073818321551022e-03, -+-6.39473696133400267699e-03, -+-5.98333858943855649570e-03, -+-5.56897389156482680583e-03, -+-5.15188256768454866386e-03, -+-4.73230561051499881708e-03, -+-4.31048516677632470584e-03, -+-3.88666439794171014385e-03, -+-3.46108734056119323949e-03, -+-3.03399876624102851630e-03, -+-2.60564404135369374893e-03, -+-2.17626898656492900885e-03, -+-1.74611973625276640544e-03, -+-1.31544259790159325310e-03, -+-8.84483911549698064228e-04, -+-4.53489909372157390909e-04, -+-2.27065754763732153979e-05, -+ 4.07620494008173754521e-04, -+ 8.37246230468182989909e-04, -+ 1.26592623189187344218e-03, -+ 1.69341690142426519808e-03, -+ 2.11947558531578586147e-03, -+ 2.54386071017997711027e-03, -+ 2.96633191949158747311e-03, -+ 3.38665020924181978113e-03, -+ 3.80457806267612890991e-03, -+ 4.21987958404042469429e-03, -+ 4.63232063125803249226e-03, -+ 5.04166894746706922836e-03, -+ 5.44769429133779015118e-03, -+ 5.85016856610528698801e-03, -+ 6.24886594723963670339e-03, -+ 6.64356300868360755141e-03, -+ 7.03403884758925946469e-03, -+ 7.42007520748272191013e-03, -+ 7.80145659978820089214e-03, -+ 8.17797042364491223732e-03, -+ 8.54940708395133565356e-03, -+ 8.91556010756844319332e-03, -+ 9.27622625762106536862e-03, -+ 9.63120564583299677841e-03, -+ 9.98030184283307808535e-03, -+ 1.03233219863735226768e-02, -+ 1.06600768874003729025e-02, -+ 1.09903811339163819116e-02, -+ 1.13140531925830963023e-02, -+ 1.16309155080034538898e-02, -+ 1.19407945996319476284e-02, -+ 1.22435211562607008245e-02, -+ 1.25389301280292575491e-02, -+ 1.28268608159079269826e-02, -+ 1.31071569586075614006e-02, -+ 1.33796668168697750756e-02, -+ 1.36442432550884507059e-02, -+ 1.39007438202245533349e-02, -+ 1.41490308179680942396e-02, -+ 1.43889713861080018736e-02, -+ 1.46204375650716145163e-02, -+ 1.48433063655967166505e-02, -+ 1.50574598334992579285e-02, -+ 1.52627851115045704011e-02, -+ 1.54591744981103021428e-02, -+ 1.56465255034476218021e-02, -+ 1.58247409021165554022e-02, -+ 1.59937287829656459015e-02, -+ 1.61534025957906987592e-02, -+ 1.63036811949317031467e-02, -+ 1.64444888797439722761e-02, -+ 1.65757554319247296659e-02, -+ 1.66974161496777871727e-02, -+ 1.68094118786993561299e-02, -+ 1.69116890399709611514e-02, -+ 1.70041996543472719028e-02, -+ 1.70869013639282085748e-02, -+ 1.71597574502064462165e-02, -+ 1.72227368489833373988e-02, -+ 1.72758141620482467971e-02, -+ 1.73189696656185082579e-02, -+ 1.73521893155377665563e-02, -+ 1.73754647492341991744e-02, -+ 1.73887932844398809817e-02, -+ 1.73921779146764994561e-02, -+ 1.73856273015124823678e-02, -+ 1.73691557636001317477e-02, -+ 1.73427832625017742940e-02, -+ 1.73065353853169359710e-02, -+ 1.72604433241233257146e-02, -+ 1.72045438522471921816e-02, -+ 1.71388792973795056618e-02, -+ 1.70634975115566134285e-02, -+ 1.69784518380263448056e-02, -+ 1.68838010750209793764e-02, -+ 1.67796094364609134353e-02, -+ 1.66659465096161037156e-02, -+ 1.65428872097501365734e-02, -+ 1.64105117317781858122e-02, -+ 1.62689054989683147545e-02, -+ 1.61181591087189469980e-02, -+ 1.59583682754456043784e-02, -+ 1.57896337706140629797e-02, -+ 1.56120613599556659623e-02, -+ 1.54257617379032624383e-02, -+ 1.52308504592903026092e-02, -+ 1.50274478683518758482e-02, -+ 1.48156790250726522890e-02, -+ 1.45956736289267492018e-02, -+ 1.43675659400543699606e-02, -+ 1.41314946979236334690e-02, -+ 1.38876030375264993694e-02, -+ 1.36360384031594637777e-02, -+ 1.33769524598382864855e-02, -+ 1.31105010024045141870e-02, -+ 1.28368438623721048408e-02, -+ 1.25561448125739872489e-02, -+ 1.22685714696633887261e-02, -+ 1.19742951945275791920e-02, -+ 1.16734909906738484192e-02, -+ 1.13663374006453127274e-02, -+ 1.10530164005323595922e-02, -+ 1.07337132926358554130e-02, -+ 1.04086165963493543218e-02, -+ 1.00779179373233617606e-02, -+ 9.74181193497532758874e-03, -+ 9.40049608841225445288e-03, -+ 9.05417066083279500899e-03, -+ 8.70303856247552944103e-03, -+ 8.34730523218016502718e-03, -+ 7.98717851763572177226e-03, -+ 7.62286855437785230982e-03, -+ 7.25458764361144089333e-03, -+ 6.88255012892701172750e-03, -+ 6.50697227198192371805e-03, -+ 6.12807212721856470888e-03, -+ 5.74606941569283727334e-03, -+ 5.36118539808457146567e-03, -+ 4.97364274696218688909e-03, -+ 4.58366541837830314410e-03, -+ 4.19147852286664863303e-03, -+ 3.79730819591561500129e-03, -+ 3.40138146799415100677e-03, -+ 3.00392613420201199520e-03, -+ 2.60517062362004749726e-03, -+ 2.20534386843704386522e-03, -+ 1.80467517292383881899e-03, -+ 1.40339408233299683948e-03, -+ 1.00173025179804741150e-03, -+ 5.99913315305479412538e-04, -+ 1.98172754814968598257e-04, -+-2.03262230396802987941e-04, -+-6.04162854095924620711e-04, -+-1.00430087308224437644e-03, -+-1.40344871673197396644e-03, -+-1.80137961602673795508e-03, -+-2.19786773199013999239e-03, -+-2.59268828346089896114e-03, -+-2.98561767413182141753e-03, -+-3.37643361878200423329e-03, -+-3.76491526863040370035e-03, -+-4.15084333574143593548e-03, -+-4.53400021641445216680e-03, -+-4.91417011348194241599e-03, -+-5.29113915745588105771e-03, -+-5.66469552644815847742e-03, -+-6.03462956480155590655e-03, -+-6.40073390036281514998e-03, -+-6.76280356033400701504e-03, -+-7.12063608563857919354e-03, -+-7.47403164373383350344e-03, -+-7.82279313981379918752e-03, -+-8.16672632633589495876e-03, -+-8.50563991081211730194e-03, -+-8.83934566180608928543e-03, -+-9.16765851307686438498e-03, -+-9.49039666581114917110e-03, -+-9.80738168888878152074e-03, -+-1.01184386171277399674e-02, -+-1.04233960474500557403e-02, -+-1.07220862329222184350e-02, -+-1.10143451746142415071e-02, -+-1.13000127112285256303e-02, -+-1.15789326064506051250e-02, -+-1.18509526339738002071e-02, -+-1.21159246601509965058e-02, -+-1.23737047242299964128e-02, -+-1.26241531161297524527e-02, -+-1.28671344517128152796e-02, -+-1.31025177455174803715e-02, -+-1.33301764809086713964e-02, -+-1.35499886776097172580e-02, -+-1.37618369565811367317e-02, -+-1.39656086022109764133e-02, -+-1.41611956217838150934e-02, -+-1.43484948021984325128e-02, -+-1.45274077639039357612e-02, -+-1.46978410120258608934e-02, -+-1.48597059846577242426e-02, -+-1.50129190982918585967e-02, -+-1.51574017903672395718e-02, -+-1.52930805589124932387e-02, -+-1.54198869992662364325e-02, -+-1.55377578378534803027e-02, -+-1.56466349630057406650e-02, -+-1.57464654528072754702e-02, -+-1.58372015999561979727e-02, -+-1.59188009336289001960e-02, -+-1.59912262383383775577e-02, -+-1.60544455697791341175e-02, -+-1.61084322676517156803e-02, -+-1.61531649654640882541e-02, -+-1.61886275973061356803e-02, -+-1.62148094015971411253e-02, -+-1.62317049218069497929e-02, -+-1.62393140041536092333e-02, -+-1.62376417922817130324e-02, -+-1.62266987189277553383e-02, -+-1.62065004945800873737e-02, -+-1.61770680931431522220e-02, -+-1.61384277346172493040e-02, -+-1.60906108648061207944e-02, -+-1.60336541320681771894e-02, -+-1.59675993611263326855e-02, -+-1.58924935239547066024e-02, -+-1.58083887077626328299e-02, -+-1.57153420800955900827e-02, -+-1.56134158510770112288e-02, -+-1.55026772328152578212e-02, -+-1.53831983960010937329e-02, -+-1.52550564237238350102e-02, -+-1.51183332625351458250e-02, -+-1.49731156707911920722e-02, -+-1.48194951643046812090e-02, -+-1.46575679593417048524e-02, -+-1.44874349129977750272e-02, -+-1.43092014609884597698e-02, -+-1.41229775528962445130e-02, -+-1.39288775849084438263e-02, -+-1.37270203300904457960e-02, -+-1.35175288662355702618e-02, -+-1.33005305013339011205e-02, -+-1.30761566967065763489e-02, -+-1.28445429878512040744e-02, -+-1.26058289030446593615e-02, -+-1.23601578797534680798e-02, -+-1.21076771789009329794e-02, -+-1.18485377970418380433e-02, -+-1.15828943764964987367e-02, -+-1.13109051134989493925e-02, -+-1.10327316644120605738e-02, -+-1.07485390500640064226e-02, -+-1.04584955582669985458e-02, -+-1.01627726445692283253e-02, -+-9.86154483130371323218e-03, -+-9.55498960498988268719e-03, -+-9.24328731215033269630e-03, -+-8.92662105360215486771e-03, -+-8.60517657728362625469e-03, -+-8.27914216968341290515e-03, -+-7.94870854592883563372e-03, -+-7.61406873860231547119e-03, -+-7.27541798534921645147e-03, -+-6.93295361534090708033e-03, -+-6.58687493466020984600e-03, -+-6.23738311067596751247e-03, -+-5.88468105547270119854e-03, -+-5.52897330840119299866e-03, -+-5.17046591782320454772e-03, -+-4.80936632211110496465e-03, -+-4.44588322997643489720e-03, -+-4.08022650019468531568e-03, -+-3.71260702079436550813e-03, -+-3.34323658778045351356e-03, -+-2.97232778346277022249e-03, -+-2.60009385445763652536e-03, -+-2.22674858943125442146e-03, -+-1.85250619666033739495e-03, -+-1.47758118147215886107e-03, -+-1.10218822363969577716e-03, -+-7.26542054800227666764e-04, -+-3.50857335965947274205e-04, -+ 2.46514648028058004550e-05, -+ 3.99770194491305848588e-04, -+ 7.74285136923100344129e-04, -+ 1.14798313418393348531e-03, -+ 1.52065170760259482478e-03, -+ 1.89207917822773732594e-03, -+ 2.26205478672706098917e-03, -+ 2.63036881264248683862e-03, -+ 2.99681269293534556161e-03, -+ 3.36117913975389048103e-03, -+ 3.72326225735529307836e-03, -+ 4.08285765811985511958e-03, -+ 4.43976257758913958607e-03, -+ 4.79377598846415613199e-03, -+ 5.14469871350105301122e-03, -+ 5.49233353723946847447e-03, -+ 5.83648531650244987989e-03, -+ 6.17696108960405759064e-03, -+ 6.51357018420694721533e-03, -+ 6.84612432376711325249e-03, -+ 7.17443773250708155542e-03, -+ 7.49832723886042704087e-03, -+ 7.81761237732933426947e-03, -+ 8.13211548869811375051e-03, -+ 8.44166181854820452113e-03, -+ 8.74607961402130464068e-03, -+ 9.04520021877286591050e-03, -+ 9.33885816606978835797e-03, -+ 9.62689126997642689865e-03, -+ 9.90914071458013148708e-03, -+ 1.01854511412086366773e-02, -+ 1.04556707335903883299e-02, -+ 1.07196513009111780990e-02, -+ 1.09772483587224512630e-02, -+ 1.12283212076583951283e-02, -+ 1.14727330099153260884e-02, -+ 1.17103508634570831898e-02, -+ 1.19410458739028241953e-02, -+ 1.21646932240592649255e-02, -+ 1.23811722410611373818e-02, -+ 1.25903664610832344978e-02, -+ 1.27921636915890018366e-02, -+ 1.29864560710836914048e-02, -+ 1.31731401263407224556e-02, -+ 1.33521168270687006635e-02, -+ 1.35232916379940497353e-02, -+ 1.36865745683296211738e-02, -+ 1.38418802186039205382e-02, -+ 1.39891278248280535867e-02, -+ 1.41282412999769145523e-02, -+ 1.42591492727635726218e-02, -+ 1.43817851236876445564e-02, -+ 1.44960870183408006145e-02, -+ 1.46019979379505230460e-02, -+ 1.46994657071504129797e-02, -+ 1.47884430189622918805e-02, -+ 1.48688874569784020702e-02, -+ 1.49407615147348158541e-02, -+ 1.50040326122672287162e-02, -+ 1.50586731098424179975e-02, -+ 1.51046603188603172779e-02, -+ 1.51419765099236949824e-02, -+ 1.51706089180728420640e-02, -+ 1.51905497451859678587e-02, -+ 1.52017961595458175883e-02, -+ 1.52043502925764267841e-02, -+ 1.51982192327537388166e-02, -+ 1.51834150166969984036e-02, -+ 1.51599546174485608208e-02, -+ 1.51278599299513004384e-02, -+ 1.50871577537351683751e-02, -+ 1.50378797728247023263e-02, -+ 1.49800625328825147420e-02, -+ 1.49137474156039364498e-02, -+ 1.48389806103799235665e-02, -+ 1.47558130832480607908e-02, -+ 1.46643005431505314001e-02, -+ 1.45645034055218620950e-02, -+ 1.44564867532300453390e-02, -+ 1.43403202948947962325e-02, -+ 1.42160783206099778503e-02, -+ 1.40838396550982923594e-02, -+ 1.39436876083266405452e-02, -+ 1.37957099236124917929e-02, -+ 1.36399987232554212313e-02, -+ 1.34766504517241942490e-02, -+ 1.33057658164359091102e-02, -+ 1.31274497261638489060e-02, -+ 1.29418112271095040594e-02, -+ 1.27489634366789363756e-02, -+ 1.25490234750032566419e-02, -+ 1.23421123942442402532e-02, -+ 1.21283551057263516704e-02, -+ 1.19078803049420742233e-02, -+ 1.16808203944710996269e-02, -+ 1.14473114048624195760e-02, -+ 1.12074929135256729645e-02, -+ 1.09615079616787580025e-02, -+ 1.07095029694022052941e-02, -+ 1.04516276488501973219e-02, -+ 1.01880349156695994978e-02, -+ 9.91888079867737047779e-03, -+ 9.64432434785405211242e-03, -+ 9.36452754070147760923e-03, -+ 9.07965518702451984678e-03, -+ 8.78987483218966227094e-03, -+ 8.49535665891908500780e-03, -+ 8.19627338767603061398e-03, -+ 7.89280017569949157719e-03, -+ 7.58511451474948479590e-03, -+ 7.27339612761909639488e-03, -+ 6.95782686347547630473e-03, -+ 6.63859059209071476759e-03, -+ 6.31587309702252765881e-03, -+ 5.98986196780740103029e-03, -+ 5.66074649122982193061e-03, -+ 5.32871754172747295192e-03, -+ 4.99396747099837244599e-03, -+ 4.65668999687305143476e-03, -+ 4.31708009151461624686e-03, -+ 3.97533386901183748152e-03, -+ 3.63164847243082006614e-03, -+ 3.28622196038877781299e-03, -+ 2.93925319321392116909e-03, -+ 2.59094171876164420382e-03, -+ 2.24148765794563754883e-03, -+ 1.89109159005432995830e-03, -+ 1.53995443791703993247e-03, -+ 1.18827735298423120720e-03, -+ 8.36261600388259543348e-04, -+ 4.84108444050918994457e-04, -+ 1.32019031902150203511e-04, -+-2.19805718726241933539e-04, -+-5.71165235461442008166e-04, -+-9.21859404947263896997e-04, -+-1.27168868652862017930e-03, -+-1.62045422549978823494e-03, -+-1.96795796585350459343e-03, -+-2.31400276246625583032e-03, -+-2.65839249265560281787e-03, -+-3.00093216704766258679e-03, -+-3.34142803969362210681e-03, -+-3.67968771736809294182e-03, -+-4.01552026799475991758e-03, -+-4.34873632813331280345e-03, -+-4.67914820946864051104e-03, -+-5.00657000424378773040e-03, -+-5.33081768957552153132e-03, -+-5.65170923059745127642e-03, -+-5.96906468236742954181e-03, -+-6.28270629048909966946e-03, -+-6.59245859038667947338e-03, -+-6.89814850517884731868e-03, -+-7.19960544209851966563e-03, -+-7.49666138740393440260e-03, -+-7.78915099972798865430e-03, -+-8.07691170181503576009e-03, -+-8.35978377059490469769e-03, -+-8.63761042554191810217e-03, -+-8.91023791527316942618e-03, -+-9.17751560233688937207e-03, -+-9.43929604614376221994e-03, -+-9.69543508399723329150e-03, -+-9.94579191017774290329e-03, -+-1.01902291530364327854e-02, -+-1.04286129500589536817e-02, -+-1.06608130208563391117e-02, -+-1.08867027380436017653e-02, -+-1.11061591959687958747e-02, -+-1.13190632772547025708e-02, -+-1.15252997171166309681e-02, -+-1.17247571654230976768e-02, -+-1.19173282464660659080e-02, -+-1.21029096164066742036e-02, -+-1.22814020183694711658e-02, -+-1.24527103351532476838e-02, -+-1.26167436395315489539e-02, -+-1.27734152421167899277e-02, -+-1.29226427367628814158e-02, -+-1.30643480434822645969e-02, -+-1.31984574488560428562e-02, -+-1.33249016439166492742e-02, -+-1.34436157594821689004e-02, -+-1.35545393989273295354e-02, -+-1.36576166683727209111e-02, -+-1.37527962042781285584e-02, -+-1.38400311984271696952e-02, -+-1.39192794202912337870e-02, -+-1.39905032367616116717e-02, -+-1.40536696292427546601e-02, -+-1.41087502080980680547e-02, -+-1.41557212244426133818e-02, -+-1.41945635792792845820e-02, -+-1.42252628299752575947e-02, -+-1.42478091940773932134e-02, -+-1.42621975504671379131e-02, -+-1.42684274378570910558e-02, -+-1.42665030506319845394e-02, -+-1.42564332320393345743e-02, -+-1.42382314647362499815e-02, -+-1.42119158586999447952e-02, -+-1.41775091365116089059e-02, -+-1.41350386160245498901e-02, -+-1.40845361904284333693e-02, -+-1.40260383057241797000e-02, -+-1.39595859356245310251e-02, -+-1.38852245538964112065e-02, -+-1.38030041041644433580e-02, -+-1.37129789671941813151e-02, -+-1.36152079256764129561e-02, -+-1.35097541265353955631e-02, -+-1.33966850407841280013e-02, -+-1.32760724209521549510e-02, -+-1.31479922561130030401e-02, -+-1.30125247245378994343e-02, -+-1.28697541440061513640e-02, -+-1.27197689198022458740e-02, -+-1.25626614904315592192e-02, -+-1.23985282710872991158e-02, -+-1.22274695949040924925e-02, -+-1.20495896520329080076e-02, -+-1.18649964265733695590e-02, -+-1.16738016314043534238e-02, -+-1.14761206409479885049e-02, -+-1.12720724219102334807e-02, -+-1.10617794620386598187e-02, -+-1.08453676969394192248e-02, -+-1.06229664349969266796e-02, -+-1.03947082804420436186e-02, -+-1.01607290546128509884e-02, -+-9.92116771545450623626e-03, -+-9.67616627530844784777e-03, -+-9.42586971703506318332e-03, -+-9.17042590852275470159e-03, -+-8.90998551563223703531e-03, -+-8.64470191362698078819e-03, -+-8.37473109714258721892e-03, -+-8.10023158874558640852e-03, -+-7.82136434613948418326e-03, -+-7.53829266806671071527e-03, -+-7.25118209896521460911e-03, -+-6.96020033243441478554e-03, -+-6.66551711356555987714e-03, -+-6.36730414019388325786e-03, -+-6.06573496313063138113e-03, -+-5.76098488543169522103e-03, -+-5.45323086076018610086e-03, -+-5.14265139090599315841e-03, -+-4.82942642251557672367e-03, -+-4.51373724309595599630e-03, -+-4.19576637635184213071e-03, -+-3.87569747691505085002e-03, -+-3.55371522452749104282e-03, -+-3.23000521773942998738e-03, -+-2.90475386718291829144e-03, -+-2.57814828848035217795e-03, -+-2.25037619485449289641e-03, -+-1.92162578949469156631e-03, -+-1.59208565774584761589e-03, -+-1.26194465918040934528e-03, -+-9.31391819614034682621e-04, -+-6.00616223127062396486e-04, -+-2.69806904154944583816e-04, -+ 6.08472602942396962656e-05, -+ 3.91157658230999324359e-04, -+ 7.20936050023826264892e-04, -+ 1.04999467542699867657e-03, -+ 1.37814636023528779528e-03, -+ 1.70520462250435696737e-03, -+ 2.03098377827778953097e-03, -+ 2.35529904676215007600e-03, -+ 2.67796665488591583565e-03, -+ 2.99880394118968215261e-03, -+ 3.31762945898433653930e-03, -+ 3.63426307872031237670e-03, -+ 3.94852608951128981885e-03, -+ 4.26024129975459756037e-03, -+ 4.56923313679098372364e-03, -+ 4.87532774554888699570e-03, -+ 5.17835308611915706711e-03, -+ 5.47813903020093976443e-03, -+ 5.77451745637115685522e-03, -+ 6.06732234411917498856e-03, -+ 6.35638986659726578504e-03, -+ 6.64155848203327753981e-03, -+ 6.92266902375569294359e-03, -+ 7.19956478878218397721e-03, -+ 7.47209162491841317327e-03, -+ 7.74009801632427347357e-03, -+ 8.00343516749617983619e-03, -+ 8.26195708562018661658e-03, -+ 8.51552066125116358108e-03, -+ 8.76398574727313937893e-03, -+ 9.00721523609652845177e-03, -+ 9.24507513505131058029e-03, -+ 9.47743463993477690266e-03, -+ 9.70416620667113177801e-03, -+ 9.92514562104791428498e-03, -+ 1.01402520664879789575e-02, -+ 1.03493681898213143316e-02, -+ 1.05523801650215433984e-02, -+ 1.07491777548722518970e-02, -+ 1.09396543705291681564e-02, -+ 1.11237071289475124292e-02, -+ 1.13012369081435404966e-02, -+ 1.14721484002587425371e-02, -+ 1.16363501624019635705e-02, -+ 1.17937546652395908869e-02, -+ 1.19442783393092378380e-02, -+ 1.20878416190330750107e-02, -+ 1.22243689844071853207e-02, -+ 1.23537890003452277554e-02, -+ 1.24760343536569357631e-02, -+ 1.25910418876418357670e-02, -+ 1.26987526342805939761e-02, -+ 1.27991118440086270452e-02, -+ 1.28920690130565843839e-02, -+ 1.29775779083439509604e-02, -+ 1.30555965899154108323e-02, -+ 1.31260874309076600724e-02, -+ 1.31890171350384308863e-02, -+ 1.32443567516100473014e-02, -+ 1.32920816880211477284e-02, -+ 1.33321717197816842077e-02, -+ 1.33646109980275606260e-02, -+ 1.33893880545334492682e-02, -+ 1.34064958042229027263e-02, -+ 1.34159315451764481197e-02, -+ 1.34176969561404253045e-02, -+ 1.34117980915397661673e-02, -+ 1.33982453740004014281e-02, -+ 1.33770535843872502568e-02, -+ 1.33482418493662668285e-02, -+ 1.33118336264995938689e-02, -+ 1.32678566868845784765e-02, -+ 1.32163430953490413505e-02, -+ 1.31573291882161602651e-02, -+ 1.30908555486537094698e-02, -+ 1.30169669796242129522e-02, -+ 1.29357124744537473754e-02, -+ 1.28471451850375104065e-02, -+ 1.27513223877034967413e-02, -+ 1.26483054467555582068e-02, -+ 1.25381597757181027092e-02, -+ 1.24209547963076202132e-02, -+ 1.22967638951557260707e-02, -+ 1.21656643783110817586e-02, -+ 1.20277374235470257274e-02, -+ 1.18830680305065279623e-02, -+ 1.17317449687113807555e-02, -+ 1.15738607234699020926e-02, -+ 1.14095114397158373110e-02, -+ 1.12387968638101957974e-02, -+ 1.10618202833434337712e-02, -+ 1.08786884649728424201e-02, -+ 1.06895115903328993823e-02, -+ 1.04944031900558870651e-02, -+ 1.02934800759447477037e-02, -+ 1.00868622713343389363e-02, -+ 9.87467293968604525878e-03, -+ 9.65703831145729371666e-03, -+ 9.43408760928757944564e-03, -+ 9.20595297154692439323e-03, -+ 8.97276937429128222667e-03, -+ 8.73467455167086133383e-03, -+ 8.49180891483720598489e-03, -+ 8.24431546939977458188e-03, -+ 7.99233973147535532722e-03, -+ 7.73602964238361088395e-03, -+ 7.47553548203802858269e-03, -+ 7.21100978108041128223e-03, -+ 6.94260723181349802963e-03, -+ 6.67048459797950268196e-03, -+ 6.39480062344236106775e-03, -+ 6.11571593982157112740e-03, -+ 5.83339297313448506416e-03, -+ 5.54799584949982379362e-03, -+ 5.25969029995765075675e-03, -+ 4.96864356445977841531e-03, -+ 4.67502429508827137272e-03, -+ 4.37900245855606801149e-03, -+ 4.08074923804454484794e-03, -+ 3.78043693443984004168e-03, -+ 3.47823886701886190315e-03, -+ 3.17432927364564567915e-03, -+ 2.86888321053426365720e-03, -+ 2.56207645163618802017e-03, -+ 2.25408538770850491381e-03, -+ 1.94508692512463700341e-03, -+ 1.63525838447931698427e-03, -+ 1.32477739905105789536e-03, -+ 1.01382181317911045614e-03, -+ 7.02569580610471595104e-04, -+ 3.91198662877513612512e-04, -+ 7.98869277630744821202e-05, -+-2.31187952088860002205e-04, -+-5.41848600360482837712e-04, -+-8.51918037984115972261e-04, -+-1.16121978375175968247e-03, -+-1.46957795454782155081e-03, -+-1.77681736514933067382e-03, -+-2.08276362753950002732e-03, -+-2.38724324967590261284e-03, -+-2.69008373365854430367e-03, -+-2.99111367324205812759e-03, -+-3.29016285063819195061e-03, -+-3.58706233255040498470e-03, -+-3.88164456539251325612e-03, -+-4.17374346963266494581e-03, -+-4.46319453321069280205e-03, -+-4.74983490397884282330e-03, -+-5.03350348111142233826e-03, -+-5.31404100543327127110e-03, -+-5.59129014861656486318e-03, -+-5.86509560119571633080e-03, -+-6.13530415935167362795e-03, -+-6.40176481041693050400e-03, -+-6.66432881705371002456e-03, -+-6.92284980005934951625e-03, -+-7.17718381975063907108e-03, -+-7.42718945588436395278e-03, -+-7.67272788607022311613e-03, -+-7.91366296262873900047e-03, -+-8.14986128785674147912e-03, -+-8.38119228765579413198e-03, -+-8.60752828348398772718e-03, -+-8.82874456259165676930e-03, -+-9.04471944650279101319e-03, -+-9.25533435770336740389e-03, -+-9.46047388450147082317e-03, -+-9.66002584402477111614e-03, -+-9.85388134331765391805e-03, -+-1.00419348385086572295e-02, -+-1.02240841920141073418e-02, -+-1.04002307277476988001e-02, -+-1.05702792843059330957e-02, -+-1.07341382661022052142e-02, -+-1.08917196924194058932e-02, -+-1.10429392443588056394e-02, -+-1.11877163096573035983e-02, -+-1.13259740253500613971e-02, -+-1.14576393182570599599e-02, -+-1.15826429432718831097e-02, -+-1.17009195194323206701e-02, -+-1.18124075637551975010e-02, -+-1.19170495228175868374e-02, -+-1.20147918020679297935e-02, -+-1.21055847928538372338e-02, -+-1.21893828971518514148e-02, -+-1.22661445499873279080e-02, -+-1.23358322395343555922e-02, -+-1.23984125248859967938e-02, -+-1.24538560514863300838e-02, -+-1.25021375642184340987e-02, -+-1.25432359181423137146e-02, -+-1.25771340868788758516e-02, -+-1.26038191686375488504e-02, -+-1.26232823898858471240e-02, -+-1.26355191066611412948e-02, -+-1.26405288035257891421e-02, -+-1.26383150901686648615e-02, -+-1.26288856956566081235e-02, -+-1.26122524603418419142e-02, -+-1.25884313254311982350e-02, -+-1.25574423202261184485e-02, -+-1.25193095470420810711e-02, -+-1.24740611638184551585e-02, -+-1.24217293644305545874e-02, -+-1.23623503567175385687e-02, -+-1.22959643382403553680e-02, -+-1.22226154697852723574e-02, -+-1.21423518466312625047e-02, -+-1.20552254675984453491e-02, -+-1.19612922018975387228e-02, -+-1.18606117538015195384e-02, -+-1.17532476251614014656e-02, -+-1.16392670757887554955e-02, -+-1.15187410817310965927e-02, -+-1.13917442914640253127e-02, -+-1.12583549800273283181e-02, -+-1.11186550011346148292e-02, -+-1.09727297372832800770e-02, -+-1.08206680478965637515e-02, -+-1.06625622155284947856e-02, -+-1.04985078901642363974e-02, -+-1.03286040316486818491e-02, -+-1.01529528502798636891e-02, -+-9.97165974559921335085e-03, -+-9.78483324341799902413e-03, -+-9.59258493111724702684e-03, -+-9.39502939125761923900e-03, -+-9.19228413354054689488e-03, -+-8.98446952515993303712e-03, -+-8.77170871958610903762e-03, -+-8.55412758382280251357e-03, -+-8.33185462418275894769e-03, -+-8.10502091062164677082e-03, -+-7.87375999967769406307e-03, -+-7.63820785606213713270e-03, -+-7.39850277294432437381e-03, -+-7.15478529097991495372e-03, -+-6.90719811612892573005e-03, -+-6.65588603631140588585e-03, -+-6.40099583694948154333e-03, -+-6.14267621544471731365e-03, -+-5.88107769464080425842e-03, -+-5.61635253532167481177e-03, -+-5.34865464779504806714e-03, -+-5.07813950261468052133e-03, -+-4.80496404049110190093e-03, -+-4.52928658144188898277e-03, -+-4.25126673323850644282e-03, -+-3.97106529919719845184e-03, -+-3.68884418537053504483e-03, -+-3.40476630719170527545e-03, -+-3.11899549562579155026e-03, -+-2.83169640288094461716e-03, -+-2.54303440773591491603e-03, -+-2.25317552053609778881e-03, -+-1.96228628791152723623e-03, -+-1.67053369727637865058e-03, -+-1.37808508115876398453e-03, -+-1.08510802141915333602e-03, -+-7.91770253410941553598e-04, -+-4.98239570138193856204e-04, -+-2.04683726464174046067e-04, -+ 8.87296565722855913767e-05, -+ 3.81833187280424608996e-04, -+ 6.74459798627879405716e-04, -+ 9.66442843278491714280e-04, -+ 1.25761618830957477670e-03, -+ 1.54781430955123577679e-03, -+ 1.83687238549551422676e-03, -+ 2.12462639072184518788e-03, -+ 2.41091318878710377666e-03, -+ 2.69557062452432027663e-03, -+ 2.97843761570351769560e-03, -+ 3.25935424399821128960e-03, -+ 3.53816184520730405566e-03, -+ 3.81470309868363116265e-03, -+ 4.08882211591671436424e-03, -+ 4.36036452822079721725e-03, -+ 4.62917757347863778605e-03, -+ 4.89511018189369654513e-03, -+ 5.15801306069900780682e-03, -+ 5.41773877778122490978e-03, -+ 5.67414184416796703314e-03, -+ 5.92707879533384274229e-03, -+ 6.17640827128176569949e-03, -+ 6.42199109535173794788e-03, -+ 6.66369035171747361307e-03, -+ 6.90137146152226561152e-03, -+ 7.13490225761727499265e-03, -+ 7.36415305785760327534e-03, -+ 7.58899673691662904340e-03, -+ 7.80930879657879342681e-03, -+ 8.02496743447280412587e-03, -+ 8.23585361120545214608e-03, -+ 8.44185111586123922145e-03, -+ 8.64284662983217863430e-03, -+ 8.83872978893951791179e-03, -+ 9.02939324381753054272e-03, -+ 9.21473271852386519032e-03, -+ 9.39464706734555871082e-03, -+ 9.56903832976962673285e-03, -+ 9.73781178358892364477e-03, -+ 9.90087599611340699046e-03, -+ 1.00581428734606900116e-02, -+ 1.02095277078994902537e-02, -+ 1.03549492232184597862e-02, -+ 1.04943296180992785144e-02, -+ 1.06275946074688987242e-02, -+ 1.07546734618099455033e-02, -+ 1.08754990444085344187e-02, -+ 1.09900078465200706085e-02, -+ 1.10981400204346221383e-02, -+ 1.11998394104246661029e-02, -+ 1.12950535815609064139e-02, -+ 1.13837338463788559362e-02, -+ 1.14658352893853201365e-02, -+ 1.15413167893916573242e-02, -+ 1.16101410396627392763e-02, -+ 1.16722745658728050550e-02, -+ 1.17276877418591822522e-02, -+ 1.17763548031668534993e-02, -+ 1.18182538583788306064e-02, -+ 1.18533668982268927672e-02, -+ 1.18816798024796634742e-02, -+ 1.19031823446065308097e-02, -+ 1.19178681942160510920e-02, -+ 1.19257349172696772155e-02, -+ 1.19267839740727354947e-02, -+ 1.19210207150453346286e-02, -+ 1.19084543742781455433e-02, -+ 1.18890980608779301547e-02, -+ 1.18629687481103703039e-02, -+ 1.18300872603478539336e-02, -+ 1.17904782578316710134e-02, -+ 1.17441702192595375659e-02, -+ 1.16911954222092898115e-02, -+ 1.16315899214134987893e-02, -+ 1.15653935248972560695e-02, -+ 1.14926497679962574816e-02, -+ 1.14134058852708338005e-02, -+ 1.13277127803342991114e-02, -+ 1.12356249936141419643e-02, -+ 1.11372006680669592693e-02, -+ 1.10325015128680588988e-02, -+ 1.09215927650972884078e-02, -+ 1.08045431494469181682e-02, -+ 1.06814248359739724648e-02, -+ 1.05523133959240563579e-02, -+ 1.04172877556533635679e-02, -+ 1.02764301486764821764e-02, -+ 1.01298260658689662922e-02, -+ 9.97756420385554482211e-03, -+ 9.81973641161405612354e-03, -+ 9.65643763532623641832e-03, -+ 9.48776586151135747915e-03, -+ 9.31382205847339390836e-03, -+ 9.13471011609818910049e-03, -+ 8.95053678403625804783e-03, -+ 8.76141160830776546953e-03, -+ 8.56744686636650917833e-03, -+ 8.36875750066302069585e-03, -+ 8.16546105074440926874e-03, -+ 7.95767758393019740415e-03, -+ 7.74552962460837469971e-03, -+ 7.52914208218922759858e-03, -+ 7.30864217776142511412e-03, -+ 7.08415936949292109753e-03, -+ 6.85582527682011919762e-03, -+ 6.62377360346902248345e-03, -+ 6.38814005935512633366e-03, -+ 6.14906228140583120678e-03, -+ 5.90667975335047463342e-03, -+ 5.66113372452884365538e-03, -+ 5.41256712776044118796e-03, -+ 5.16112449632528166171e-03, -+ 4.90695188010295546555e-03, -+ 4.65019676091923093997e-03, -+ 4.39100796714859270553e-03, -+ 4.12953558762247860403e-03, -+ 3.86593088489268566291e-03, -+ 3.60034620790024339002e-03, -+ 3.33293490409898975416e-03, -+ 3.06385123108688468482e-03, -+ 2.79325026779358087312e-03, -+ 2.52128782527450854764e-03, -+ 2.24812035716717229308e-03, -+ 1.97390486985574153955e-03, -+ 1.69879883239866091155e-03, -+ 1.42296008626978756108e-03, -+ 1.14654675496503560654e-03, -+ 8.69717153525156449340e-04, -+ 5.92629698028697892917e-04, -+ 3.15442815104587483740e-04, -+ 3.83148515150130003753e-05, -+-2.38596016135179852516e-04, -+-5.15131871516745108372e-04, -+-7.91135148467245652611e-04, -+-1.06644872060530828545e-03, -+-1.34091599061669417524e-03, -+-1.61438097916256320837e-03, -+-1.88668841335719902723e-03, -+-2.15768381476730232091e-03, -+-2.42721358688397208930e-03, -+-2.69512510201327460183e-03, -+-2.96126678754182314640e-03, -+-3.22548821152533965809e-03, -+-3.48764016755303369807e-03, -+-3.74757475883982088538e-03, -+-4.00514548149979391495e-03, -+-4.26020730695223729528e-03, -+-4.51261676341580680871e-03, -+-4.76223201644600246940e-03, -+-5.00891294846663153589e-03, -+-5.25252123725567128532e-03, -+-5.49292043333865411675e-03, -+-5.72997603624744288736e-03, -+-5.96355556960147161621e-03, -+-6.19352865496984421323e-03, -+-6.41976708447395284091e-03, -+-6.64214489208741348802e-03, -+-6.86053842359856183575e-03, -+-7.07482640519247439614e-03, -+-7.28489001061597037101e-03, -+-7.49061292688948335977e-03, -+-7.69188141852844651375e-03, -+-7.88858439023906905796e-03, -+-8.08061344805422777926e-03, -+-8.26786295887581117181e-03, -+-8.45023010839095374547e-03, -+-8.62761495733049832424e-03, -+-8.79992049603937377678e-03, -+-8.96705269732801270310e-03, -+-9.12892056757751840790e-03, -+-9.28543619607121589743e-03, -+-9.43651480252325272624e-03, -+-9.58207478278219441925e-03, -+-9.72203775268269676513e-03, -+-9.85632859002284582306e-03, -+-9.98487547464438525424e-03, -+-1.01076099265952259326e-02, -+-1.02244668423529874723e-02, -+-1.03353845290914767713e-02, -+-1.04403047369727476623e-02, -+-1.05391726894459199226e-02, -+-1.06319371115395251703e-02, -+-1.07185502561315034592e-02, -+-1.07989679281840673941e-02, -+-1.08731495069313705004e-02, -+-1.09410579660090354764e-02, -+-1.10026598915155138930e-02, -+-1.10579254979971536299e-02, -+-1.11068286423497506604e-02, -+-1.11493468356296306782e-02, -+-1.11854612527701267194e-02, -+-1.12151567401993432216e-02, -+-1.12384218213567241285e-02, -+-1.12552487001068551170e-02, -+-1.12656332620508243397e-02, -+-1.12695750737355805671e-02, -+-1.12670773797639463265e-02, -+-1.12581470978087311990e-02, -+-1.12427948115352074887e-02, -+-1.12210347614381672487e-02, -+-1.11928848336002705749e-02, -+-1.11583665463801332690e-02, -+-1.11175050350392178033e-02, -+-1.10703290343182984834e-02, -+-1.10168708589748198801e-02, -+-1.09571663822947782535e-02, -+-1.08912550125919559835e-02, -+-1.08191796677104181551e-02, -+-1.07409867475466505593e-02, -+-1.06567261046078953085e-02, -+-1.05664510126258718442e-02, -+-1.04702181332450312140e-02, -+-1.03680874808063875486e-02, -+-1.02601223852479897514e-02, -+-1.01463894531454990044e-02, -+-1.00269585269162232050e-02, -+-9.90190264221126568989e-03, -+-9.77129798352259666683e-03, -+-9.63522383803080625930e-03, -+-9.49376254772124616998e-03, -+-9.34699945979887078518e-03, -+-9.19502287542989238389e-03, -+-9.03792399684144424910e-03, -+-8.87579687281107691799e-03, -+-8.70873834257845577667e-03, -+-8.53684797821176177823e-03, -+-8.36022802546492783959e-03, -+-8.17898334315863943800e-03, -+-7.99322134112125451399e-03, -+-7.80305191672834696365e-03, -+-7.60858739007534007337e-03, -+-7.40994243782330200970e-03, -+-7.20723402575608202564e-03, -+-7.00058134008851255109e-03, -+-6.79010571756536070176e-03, -+-6.57593057439340850090e-03, -+-6.35818133404676254922e-03, -+-6.13698535398672032765e-03, -+-5.91247185134246861643e-03, -+-5.68477182759180490329e-03, -+-5.45401799228807746683e-03, -+-5.22034468587699671677e-03, -+-4.98388780164810921841e-03, -+-4.74478470686644573928e-03, -+-4.50317416312886326102e-03, -+-4.25919624599436445062e-03, -+-4.01299226392974606181e-03, -+-3.76470467662182433494e-03, -+-3.51447701270230384446e-03, -+-3.26245378693090131231e-03, -+-3.00878041688648536350e-03, -+-2.75360313921323108730e-03, -+-2.49706892547035515587e-03, -+-2.23932539763252707460e-03, -+-1.98052074329282566320e-03, -+-1.72080363061157654535e-03, -+-1.46032312306425922019e-03, -+-1.19922859403635969841e-03, -+-9.37669641312056218428e-04, -+-6.75796001507703134221e-04, -+-4.13757464498088920954e-04, -+-1.51703787884435286606e-04, -+ 1.10215388447121949347e-04, -+ 3.71850627627885114545e-04, -+ 6.33052780921098995522e-04, -+ 8.93673072601122806674e-04, -+ 1.15356318454689905743e-03, -+ 1.41257534050370911136e-03, -+ 1.67056238996633678491e-03, -+ 1.92737789163165596125e-03, -+ 2.18287619637864190730e-03, -+ 2.43691252972557228021e-03, -+ 2.68934307371902769912e-03, -+ 2.94002504820795344462e-03, -+ 3.18881679145808279857e-03, -+ 3.43557784005892952531e-03, -+ 3.68016900808052979666e-03, -+ 3.92245246543618079904e-03, -+ 4.16229181540278981438e-03, -+ 4.39955217126052674365e-03, -+ 4.63410023200553494727e-03, -+ 4.86580435709433288538e-03, -+ 5.09453464017795010221e-03, -+ 5.32016298178517119816e-03, -+ 5.54256316091259002704e-03, -+ 5.76161090548329372224e-03, -+ 5.97718396163549221811e-03, -+ 6.18916216179911122391e-03, -+ 6.39742749152663690154e-03, -+ 6.60186415503853565173e-03, -+ 6.80235863944797080477e-03, -+ 6.99879977762879034592e-03, -+ 7.19107880969246070213e-03, -+ 7.37908944304029295463e-03, -+ 7.56272791095595735972e-03, -+ 7.74189302970967625078e-03, -+ 7.91648625413953442587e-03, -+ 8.08641173168029268881e-03, -+ 8.25157635481136783606e-03, -+ 8.41188981189416006001e-03, -+ 8.56726463637145184415e-03, -+ 8.71761625430204217801e-03, -+ 8.86286303020573928979e-03, -+ 9.00292631119170398690e-03, -+ 9.13773046934988723844e-03, -+ 9.26720294237984125452e-03, -+ 9.39127427243598503215e-03, -+ 9.50987814316970984929e-03, -+ 9.62295141494749588229e-03, -+ 9.73043415822708555873e-03, -+ 9.83226968507381650364e-03, -+ 9.92840457880114421463e-03, -+ 1.00187887217194990935e-02, -+ 1.01033753209798602551e-02, -+ 1.01821209324982810823e-02, -+ 1.02549854829495166314e-02, -+ 1.03219322898189282134e-02, -+ 1.03829280795032750928e-02, -+ 1.04379430034503180302e-02, -+ 1.04869506523312169127e-02, -+ 1.05299280682385320435e-02, -+ 1.05668557549043577726e-02, -+ 1.05977176859349212640e-02, -+ 1.06225013110582688913e-02, -+ 1.06411975603831251286e-02, -+ 1.06538008466682248415e-02, -+ 1.06603090656027660321e-02, -+ 1.06607235940987827433e-02, -+ 1.06550492865989197139e-02, -+ 1.06432944694025734267e-02, -+ 1.06254709330158968877e-02, -+ 1.06015939225314811956e-02, -+ 1.05716821260445053426e-02, -+ 1.05357576611141614403e-02, -+ 1.04938460592794574611e-02, -+ 1.04459762486396531833e-02, -+ 1.03921805345111133156e-02, -+ 1.03324945781732863842e-02, -+ 1.02669573737173662475e-02, -+ 1.01956112230122235285e-02, -+ 1.01185017088040590805e-02, -+ 1.00356776659660425211e-02, -+ 9.94719115091608624413e-03, -+ 9.85309740922234687799e-03, -+ 9.75345484141500011777e-03, -+ 9.64832496702668768185e-03, -+ 9.53777238688333431349e-03, -+ 9.42186474366750112419e-03, -+ 9.30067268077903845647e-03, -+ 9.17426979951779277001e-03, -+ 9.04273261461393390581e-03, -+ 8.90614050813234511828e-03, -+ 8.76457568178037361994e-03, -+ 8.61812310764482544800e-03, -+ 8.46687047738961182097e-03, -+ 8.31090814994421903106e-03, -+ 8.15032909771297095491e-03, -+ 7.98522885133778372035e-03, -+ 7.81570544304719359852e-03, -+ 7.64185934862476878848e-03, -+ 7.46379342803140874429e-03, -+ 7.28161286471641980289e-03, -+ 7.09542510365326374588e-03, -+ 6.90533978813562872995e-03, -+ 6.71146869537252947074e-03, -+ 6.51392567091878173929e-03, -+ 6.31282656197840099516e-03, -+ 6.10828914962330098148e-03, -+ 5.90043307996295039036e-03, -+ 5.68937979430757592714e-03, -+ 5.47525245836473755529e-03, -+ 5.25817589051068290384e-03, -+ 5.03827648917754868096e-03, -+ 4.81568215940014407450e-03, -+ 4.59052223856344730063e-03, -+ 4.36292742139295433579e-03, -+ 4.13302968423510681123e-03, -+ 3.90096220866709446004e-03, -+ 3.66685930448303705129e-03, -+ 3.43085633209993298015e-03, -+ 3.19308962442840099660e-03, -+ 2.95369640825326627495e-03, -+ 2.71281472516826487051e-03, -+ 2.47058335211343968810e-03, -+ 2.22714172155590722779e-03, -+ 1.98262984136404274774e-03, -+ 1.73718821442020768774e-03, -+ 1.49095775801618085979e-03, -+ 1.24407972307950527406e-03, -+ 9.96695613276132701130e-04, -+ 7.48947104035837802997e-04, -+ 5.00975961545737855096e-04, -+ 2.52923961761159811490e-04, -+ 4.93280947509291801083e-06, -+-2.42855942503384357196e-04, -+-4.90300974016580110200e-04, -+-7.37261278027570056415e-04, -+-9.83596240843677242782e-04, -+-1.22916572204938767329e-03, -+-1.47383013410300081451e-03, -+-1.71745052155293964798e-03, -+-1.95988863982576476050e-03, -+-2.20100703354622747807e-03, -+-2.44066911434088866517e-03, -+-2.67873923808214847372e-03, -+-2.91508278153101421312e-03, -+-3.14956621833333222718e-03, -+-3.38205719432752276860e-03, -+-3.61242460212125989991e-03, -+-3.84053865489516728718e-03, -+-4.06627095939203833663e-03, -+-4.28949458805057831645e-03, -+-4.51008415024378109953e-03, -+-4.72791586258040994611e-03, -+-4.94286761823193362270e-03, -+-5.15481905524671577684e-03, -+-5.36365162380991484375e-03, -+-5.56924865241561605628e-03, -+-5.77149541291191014308e-03, -+-5.97027918438345836516e-03, -+-6.16548931583604711143e-03, -+-6.35701728764813140532e-03, -+-6.54475677175619420523e-03, -+-6.72860369053819660362e-03, -+-6.90845627436653328401e-03, -+-7.08421511779518033730e-03, -+-7.25578323435132135910e-03, -+-7.42306610990221913543e-03, -+-7.58597175456684601896e-03, -+-7.74441075314436476462e-03, -+-7.89829631403181527116e-03, -+-8.04754431660486060918e-03, -+-8.19207335703401803850e-03, -+-8.33180479251450362144e-03, -+-8.46666278388312140701e-03, -+-8.59657433660001440989e-03, -+-8.72146934007399753097e-03, -+-8.84128060530934949124e-03, -+-8.95594390085470426488e-03, -+-9.06539798703423320425e-03, -+-9.16958464844403950411e-03, -+-9.26844872469488080535e-03, -+-9.36193813938749827552e-03, -+-9.45000392730357963167e-03, -+-9.53260025979855117606e-03, -+-9.60968446838431425427e-03, -+-9.68121706648877346224e-03, -+-9.74716176938165805577e-03, -+-9.80748551225691343747e-03, -+-9.86215846646274103826e-03, -+-9.91115405387120278202e-03, -+-9.95444895938146258330e-03, -+-9.99202314155041813881e-03, -+-1.00238598413463411013e-02, -+-1.00499455890222209875e-02, -+-1.00702702091063772682e-02, -+-1.00848268235089154332e-02, -+-1.00936118527438327408e-02, -+-1.00966250152679168361e-02, -+-1.00938693249378146077e-02, -+-1.00853510865886227682e-02, -+-1.00710798897381062500e-02, -+-1.00510686004214797040e-02, -+-1.00253333511630630254e-02, -+-9.99389352909173418749e-03, -+-9.95677176220922943717e-03, -+-9.91399390381976150510e-03, -+-9.86558901513197826494e-03, -+-9.81158934604420447656e-03, -+-9.75203031412597010075e-03, -+-9.68695048180868989451e-03, -+-9.61639153180029321311e-03, -+-9.54039824073970449403e-03, -+-9.45901845110641917302e-03, -+-9.37230304140389963719e-03, -+-9.28030589463477509349e-03, -+-9.18308386508685792204e-03, -+-9.08069674345089207501e-03, -+-8.97320722029071662917e-03, -+-8.86068084788880529212e-03, -+-8.74318600048899774446e-03, -+-8.62079383296257897862e-03, -+-8.49357823791978966410e-03, -+-8.36161580129450403287e-03, -+-8.22498575642871369851e-03, -+-8.08376993668271683069e-03, -+-7.93805272660061574108e-03, -+-7.78792101165969724574e-03, -+-7.63346412663362498818e-03, -+-7.47477380259930785505e-03, -+-7.31194411262098796500e-03, -+-7.14507141614020412773e-03, -+-6.97425430210722122754e-03, -+-6.79959353088687573630e-03, -+-6.62119197497169301864e-03, -+-6.43915455853849138385e-03, -+-6.25358819588309883253e-03, -+-6.06460172876989358354e-03, -+-5.87230586273140842124e-03, -+-5.67681310235816811993e-03, -+-5.47823768561213342299e-03, -+-5.27669551720578392656e-03, -+-5.07230410108449637774e-03, -+-4.86518247205038317088e-03, -+-4.65545112656870225393e-03, -+-4.44323195279612039033e-03, -+-4.22864815987201558140e-03, -+-4.01182420651321949151e-03, -+-3.79288572895385015307e-03, -+-3.57195946827177420596e-03, -+-3.34917319714373535808e-03, -+-3.12465564607069309216e-03, -+-2.89853642911835473334e-03, -+-2.67094596921149977573e-03, -+-2.44201542302870371753e-03, -+-2.21187660553990271539e-03, -+-1.98066191422849313675e-03, -+-1.74850425304324988245e-03, -+-1.51553695612283568887e-03, -+-1.28189371133704578531e-03, -+-1.04770848368741461600e-03, -+-8.13115438614004488148e-04, -+-5.78248865247532866513e-04, -+-3.43243099654593679469e-04, -+-1.08232448119056134180e-04, -+ 1.26648889498497872709e-04, -+ 3.61266896277643255724e-04, -+ 5.95487814588576617851e-04, -+ 8.29178222232456471966e-04, -+ 1.06220510832932932450e-03, -+ 1.29443594890761418982e-03, -+ 1.52573878215697851524e-03, -+ 1.75598228329790738422e-03, -+ 1.98503583902642517095e-03, -+ 2.21276962149356305753e-03, -+ 2.43905466177587538015e-03, -+ 2.66376292279626092005e-03, -+ 2.88676737165370449201e-03, -+ 3.10794205132203151670e-03, -+ 3.32716215167451348847e-03, -+ 3.54430407979887786632e-03, -+ 3.75924552955919340572e-03, -+ 3.97186555036659408313e-03, -+ 4.18204461512168643861e-03, -+ 4.38966468728887570377e-03, -+ 4.59460928706578036751e-03, -+ 4.79676355661041737416e-03, -+ 4.99601432429057183693e-03, -+ 5.19225016791701170921e-03, -+ 5.38536147692926601277e-03, -+ 5.57524051349589811616e-03, -+ 5.76178147249606278230e-03, -+ 5.94488054035048445189e-03, -+ 6.12443595266757775941e-03, -+ 6.30034805067354337221e-03, -+ 6.47251933639503632123e-03, -+ 6.64085452656393640525e-03, -+ 6.80526060521449791679e-03, -+ 6.96564687494400421736e-03, -+ 7.12192500680845601291e-03, -+ 7.27400908882688563423e-03, -+ 7.42181567306544106438e-03, -+ 7.56526382127895545560e-03, -+ 7.70427514908233069396e-03, -+ 7.83877386862820088598e-03, -+ 7.96868682976907029281e-03, -+ 8.09394355968027362502e-03, -+ 8.21447630092295155713e-03, -+ 8.33022004792652141780e-03, -+ 8.44111258187129308295e-03, -+ 8.54709450395172223858e-03, -+ 8.64810926700426002567e-03, -+ 8.74410320548165559407e-03, -+ 8.83502556375806609446e-03, -+ 8.92082852275120734287e-03, -+ 9.00146722484649296214e-03, -+ 9.07689979711120281669e-03, -+ 9.14708737278599470777e-03, -+ 9.21199411104400324446e-03, -+ 9.27158721500605589871e-03, -+ 9.32583694800504132971e-03, -+ 9.37471664808996879570e-03, -+ 9.41820274076340252511e-03, -+ 9.45627474994699748767e-03, -+ 9.48891530716929401668e-03, -+ 9.51611015897272857766e-03, -+ 9.53784817253677981441e-03, -+ 9.55412133951539892240e-03, -+ 9.56492477808816750351e-03, -+ 9.57025673322536851728e-03, -+ 9.57011857516825228953e-03, -+ 9.56451479612665210472e-03, -+ 9.55345300519767903769e-03, -+ 9.53694392150929680374e-03, -+ 9.51500136559463131902e-03, -+ 9.48764224900292864329e-03, -+ 9.45488656215475072042e-03, -+ 9.41675736044983967277e-03, -+ 9.37328074863657233207e-03, -+ 9.32448586345385396768e-03, -+ 9.27040485455623772260e-03, -+ 9.21107286373510844579e-03, -+ 9.14652800244862389245e-03, -+ 9.07681132767460333022e-03, -+ 9.00196681610215994340e-03, -+ 8.92204133667740678648e-03, -+ 8.83708462152045341742e-03, -+ 8.74714923523178117248e-03, -+ 8.65229054260652913344e-03, -+ 8.55256667477650479869e-03, -+ 8.44803849380110737088e-03, -+ 8.33876955572694297802e-03, -+ 8.22482607214039367072e-03, -+ 8.10627687023531343091e-03, -+ 7.98319335141973659975e-03, -+ 7.85564944848663425370e-03, -+ 7.72372158137452947957e-03, -+ 7.58748861154383627547e-03, -+ 7.44703179499617545084e-03, -+ 7.30243473396576317502e-03, -+ 7.15378332730893639474e-03, -+ 7.00116571962369673571e-03, -+ 6.84467224912835292550e-03, -+ 6.68439539432962807203e-03, -+ 6.52042971951210560688e-03, -+ 6.35287181908096316302e-03, -+ 6.18182026079089775444e-03, -+ 6.00737552789352719645e-03, -+ 5.82963996023949920094e-03, -+ 5.64871769436637964634e-03, -+ 5.46471460260989760210e-03, -+ 5.27773823127398664101e-03, -+ 5.08789773789389884046e-03, -+ 4.89530382763052763356e-03, -+ 4.70006868883239992823e-03, -+ 4.50230592780280144960e-03, -+ 4.30213050280925293073e-03, -+ 4.09965865737595570178e-03, -+ 3.89500785289395058675e-03, -+ 3.68829670059122758860e-03, -+ 3.47964489290170791991e-03, -+ 3.26917313427090060543e-03, -+ 3.05700307144005523768e-03, -+ 2.84325722324815094444e-03, -+ 2.62805890999240517047e-03, -+ 2.41153218238787615466e-03, -+ 2.19380175016706995342e-03, -+ 1.97499291036058082296e-03, -+ 1.75523147530006872613e-03, -+ 1.53464370038409927272e-03, -+ 1.31335621165009405059e-03, -+ 1.09149593319219089145e-03, -+ 8.69190014465733669022e-04, -+ 6.46565757523822519717e-04, -+ 4.23750544222993737447e-04, -+ 2.00871763442388796871e-04, -+-2.19432616430028802536e-05, -+-2.44567346193297504003e-04, -+-4.66873516198418401623e-04, -+-6.88735080792504629141e-04, -+-9.10025704351406588243e-04, -+-1.13061947832844914008e-03, -+-1.35039099278848459193e-03, -+-1.56921540760134731185e-03, -+-1.78696852325255445618e-03, -+-2.00352685123184786134e-03, -+-2.21876768395961026376e-03, -+-2.43256916421236753928e-03, -+-2.64481035400563951540e-03, -+-2.85537130289943187622e-03, -+-3.06413311568427739612e-03, -+-3.27097801941039290421e-03, -+-3.47578942972392133937e-03, -+-3.67845201647113524343e-03, -+-3.87885176853450686779e-03, -+-4.07687605786403312047e-03, -+-4.27241370266879562367e-03, -+-4.46535502973073768207e-03, -+-4.65559193580989804512e-03, -+-4.84301794810346793868e-03, -+-5.02752828372539546653e-03, -+-5.20901990817508944720e-03, -+-5.38739159276095062184e-03, -+-5.56254397094743408686e-03, -+-5.73437959359436588702e-03, -+-5.90280298305815697563e-03, -+-6.06772068612327578757e-03, -+-6.22904132573793255234e-03, -+-6.38667565152189597305e-03, -+-6.54053658902132174086e-03, -+-6.69053928768123529203e-03, -+-6.83660116751098716203e-03, -+-6.97864196441732535098e-03, -+-7.11658377417776714241e-03, -+-7.25035109503333486530e-03, -+-7.37987086887549603720e-03, -+-7.50507252100559608954e-03, -+-7.62588799844512044840e-03, -+-7.74225180677637174476e-03, -+-7.85410104549275414620e-03, -+-7.96137544184076853537e-03, -+-8.06401738313571557482e-03, -+-8.16197194753211924256e-03, -+-8.25518693323474758716e-03, -+-8.34361288613344465048e-03, -+-8.42720312584763903141e-03, -+-8.50591377016694447089e-03, -+-8.57970375787523234501e-03, -+-8.64853486994612667693e-03, -+-8.71237174909944220302e-03, -+-8.77118191770899502391e-03, -+-8.82493579405169495389e-03, -+-8.87360670689150109192e-03, -+-8.91717090839015333326e-03, -+-8.95560758533894135658e-03, -+-8.98889886870667467744e-03, -+-9.01702984149947012193e-03, -+-9.03998854492910064451e-03, -+-9.05776598288827831940e-03, -+-9.07035612473096330977e-03, -+-9.07775590635802147321e-03, -+-9.07996522960853764961e-03, -+-9.07698695995886803423e-03, -+-9.06882692253164167384e-03, -+-9.05549389641891432079e-03, -+-9.03699960732328583246e-03, -+-9.01335871852335275556e-03, -+-8.98458882016932476600e-03, -+-8.95071041691646723804e-03, -+-8.91174691390494294607e-03, -+-8.86772460109508213477e-03, -+-8.81867263596835572470e-03, -+-8.76462302460546613392e-03, -+-8.70561060115330326292e-03, -+-8.64167300569398770527e-03, -+-8.57285066052993274810e-03, -+-8.49918674489946214534e-03, -+-8.42072716813898301813e-03, -+-8.33752054130776007468e-03, -+-8.24961814729350748077e-03, -+-8.15707390941654633676e-03, -+-8.05994435855085684939e-03, -+-7.95828859878412557538e-03, -+-7.85216827163510294740e-03, -+-7.74164751885155454081e-03, -+-7.62679294381024292654e-03, -+-7.50767357154260520785e-03, -+-7.38436080740939235212e-03, -+-7.25692839445000407311e-03, -+-7.12545236943096498700e-03, -+-6.99001101761916477512e-03, -+-6.85068482630888687945e-03, -+-6.70755643712759620778e-03, -+-6.56071059715018171238e-03, -+-6.41023410885009203158e-03, -+-6.25621577891687877943e-03, -+-6.09874636596976875402e-03, -+-5.93791852719933836713e-03, -+-5.77382676396723509143e-03, -+-5.60656736639539039074e-03, -+-5.43623835697979850695e-03, -+-5.26293943325864543858e-03, -+-5.08677190957020682743e-03, -+-4.90783865793382578085e-03, -+-4.72624404808862780270e-03, -+-4.54209388672411652765e-03, -+-4.35549535594014370493e-03, -+-4.16655695096843255165e-03, -+-3.97538841719484881826e-03, -+-3.78210068651828800954e-03, -+-3.58680581308160571774e-03, -+-3.38961690841329795279e-03, -+-3.19064807601676572041e-03, -+-2.99001434544510355171e-03, -+-2.78783160589872848825e-03, -+-2.58421653938650406832e-03, -+-2.37928655348473936521e-03, -+-2.17315971373707597994e-03, -+-1.96595467573080053339e-03, -+-1.75779061689126871355e-03, -+-1.54878716803180682161e-03, -+-1.33906434469759582327e-03, -+-1.12874247834651849839e-03, -+-9.17942147402158120997e-04, -+-7.06784108220954348026e-04, -+-4.95389226012176797989e-04, -+-2.83878405750408527308e-04, -+-7.23725231191953317922e-05, -+ 1.39007644472942073393e-04, -+ 3.50141486766494293426e-04, -+ 5.60908629376450848514e-04, -+ 7.71189002326557382014e-04, -+ 9.80862908357632698117e-04, -+ 1.18981109096850837074e-03, -+ 1.39791480215185285468e-03, -+ 1.60505586978618446266e-03, -+ 1.81111676464667430489e-03, -+ 2.01598066699498323223e-03, -+ 2.21953153271216372527e-03, -+ 2.42165415893787249260e-03, -+ 2.62223424917535025483e-03, -+ 2.82115847782954658890e-03, -+ 3.01831455413943379809e-03, -+ 3.21359128546936040696e-03, -+ 3.40687863992359188381e-03, -+ 3.59806780824958004350e-03, -+ 3.78705126499338838933e-03, -+ 3.97372282887472824675e-03, -+ 4.15797772234820922632e-03, -+ 4.33971263031428678564e-03, -+ 4.51882575795083032272e-03, -+ 4.69521688763073485884e-03, -+ 4.86878743489439942682e-03, -+ 5.03944050344600283364e-03, -+ 5.20708093914320439138e-03, -+ 5.37161538294856407555e-03, -+ 5.53295232281637763133e-03, -+ 5.69100214448343532520e-03, -+ 5.84567718113605111485e-03, -+ 5.99689176192734485493e-03, -+ 6.14456225931638965604e-03, -+ 6.28860713520388876080e-03, -+ 6.42894698583886935878e-03, -+ 6.56550458547169348000e-03, -+ 6.69820492872941122137e-03, -+ 6.82697527169041310652e-03, -+ 6.95174517163579808177e-03, -+ 7.07244652545614607003e-03, -+ 7.18901360669207869364e-03, -+ 7.30138310118917405883e-03, -+ 7.40949414134865064208e-03, -+ 7.51328833895314410901e-03, -+ 7.61270981655247976766e-03, -+ 7.70770523739102830091e-03, -+ 7.79822383386149457080e-03, -+ 7.88421743446952177914e-03, -+ 7.96564048929547866007e-03, -+ 8.04245009393938191378e-03, -+ 8.11460601193707622980e-03, -+ 8.18207069563602756856e-03, -+ 8.24480930551941583462e-03, -+ 8.30278972796945347046e-03, -+ 8.35598259146062144476e-03, -+ 8.40436128117489321399e-03, -+ 8.44790195203182735229e-03, -+ 8.48658354012752670636e-03, -+ 8.52038777257667530318e-03, -+ 8.54929917575385743544e-03, -+ 8.57330508193055763899e-03, -+ 8.59239563430499141139e-03, -+ 8.60656379042347950692e-03, -+ 8.61580532399272396027e-03, -+ 8.62011882508288869442e-03, -+ 8.61950569872288463458e-03, -+ 8.61397016188992017960e-03, -+ 8.60351923889614116081e-03, -+ 8.58816275517627555902e-03, -+ 8.56791332948142643489e-03, -+ 8.54278636448400040260e-03, -+ 8.51280003580121708007e-03, -+ 8.47797527944401177469e-03, -+ 8.43833577770019410691e-03, -+ 8.39390794346085364341e-03, -+ 8.34472090300016587638e-03, -+ 8.29080647722033568792e-03, -+ 8.23219916137209704876e-03, -+ 8.16893610326531807719e-03, -+ 8.10105707998175217366e-03, -+ 8.02860447310570039814e-03, -+ 7.95162324248711339936e-03, -+ 7.87016089855287724608e-03, -+ 7.78426747318477444543e-03, -+ 7.69399548918007353260e-03, -+ 7.59939992831438169973e-03, -+ 7.50053819802581206444e-03, -+ 7.39747009674054673695e-03, -+ 7.29025777786024634097e-03, -+ 7.17896571243396234424e-03, -+ 7.06366065053597690093e-03, -+ 6.94441158137212768281e-03, -+ 6.82128969214047548714e-03, -+ 6.69436832566827795532e-03, -+ 6.56372293685217843284e-03, -+ 6.42943104792645641482e-03, -+ 6.29157220258638738564e-03, -+ 6.15022791899296188828e-03, -+ 6.00548164168810023889e-03, -+ 5.85741869244729099903e-03, -+ 5.70612622009830997016e-03, -+ 5.55169314933761943315e-03, -+ 5.39421012857201238877e-03, -+ 5.23376947681718652367e-03, -+ 5.07046512968433327889e-03, -+ 4.90439258448602602436e-03, -+ 4.73564884449306690989e-03, -+ 4.56433236237605791802e-03, -+ 4.39054298286334701573e-03, -+ 4.21438188464811746420e-03, -+ 4.03595152158122121716e-03, -+ 3.85535556318054341285e-03, -+ 3.67269883449336575001e-03, -+ 3.48808725534603724164e-03, -+ 3.30162777901616766654e-03, -+ 3.11342833036215701700e-03, -+ 2.92359774344746591729e-03, -+ 2.73224569869404739636e-03, -+ 2.53948265960054347934e-03, -+ 2.34541980906500472509e-03, -+ 2.15016898534491464681e-03, -+ 1.95384261769374848600e-03, -+ 1.75655366171025071990e-03, -+ 1.55841553443768969338e-03, -+ 1.35954204925029724198e-03, -+ 1.16004735056427139318e-03, -+ 9.60045848410695946279e-04, -+ 7.59652152908002432571e-04, -+ 5.58981008670681638398e-04, -+ 3.58147229193453995114e-04, -+ 1.57265631246792758451e-04, -+-4.35490306794674293363e-05, -+-2.44182129843599320107e-04, -+-4.44519232597282950344e-04, -+-6.44446163569028346828e-04, -+-8.43849070649477944230e-04, -+-1.04261448974139812711e-03, -+-1.24062940923833162771e-03, -+-1.43778133419359788019e-03, -+-1.63395835014485757766e-03, -+-1.82904918655875121242e-03, -+-2.02294327985625636140e-03, -+-2.21553083598718210043e-03, -+-2.40670289251588859908e-03, -+-2.59635138018404895352e-03, -+-2.78436918391547104032e-03, -+-2.97065020322924595864e-03, -+-3.15508941202569071979e-03, -+-3.33758291771281195501e-03, -+-3.51802801964081748518e-03, -+-3.69632326680855837625e-03, -+-3.87236851481334142661e-03, -+-4.04606498200982094005e-03, -+-4.21731530484743474818e-03, -+-4.38602359235502371748e-03, -+-4.55209547974291459105e-03, -+-4.71543818109126672972e-03, -+-4.87596054109631048268e-03, -+-5.03357308584660798761e-03, -+-5.18818807259795525266e-03, -+-5.33971953852289266118e-03, -+-5.48808334840551401146e-03, -+-5.63319724125592186798e-03, -+-5.77498087581854776390e-03, -+-5.91335587494941708475e-03, -+-6.04824586883698656764e-03, -+-6.17957653704386423305e-03, -+-6.30727564934618813858e-03, -+-6.43127310534771529787e-03, -+-6.55150097284682483151e-03, -+-6.66789352493667251270e-03, -+-6.78038727581722639598e-03, -+-6.88892101529996712939e-03, -+-6.99343584198691605586e-03, -+-7.09387519510564119873e-03, -+-7.19018488498349497839e-03, -+-7.28231312214434444580e-03, -+-7.37021054501293959582e-03, -+-7.45383024621102448920e-03, -+-7.53312779743236203556e-03, -+-7.60806127288360129618e-03, -+-7.67859127127740528906e-03, -+-7.74468093636805719054e-03, -+-7.80629597601776963056e-03, -+-7.86340467978466871324e-03, -+-7.91597793502309132752e-03, -+-7.96398924148845367699e-03, -+-8.00741472443937570003e-03, -+-8.04623314623062815820e-03, -+-8.08042591639200093179e-03, -+-8.10997710018770794071e-03, -+-8.13487342565317322896e-03, -+-8.15510428910632897970e-03, -+-8.17066175913122756669e-03, -+-8.18154057903300313548e-03, -+-8.18773816776408903950e-03, -+-8.18925461932203113680e-03, -+-8.18609270062076350982e-03, -+-8.17825784783763644337e-03, -+-8.16575816123921681411e-03, -+-8.14860439849041627569e-03, -+-8.12680996645165354408e-03, -+-8.10039091146990027081e-03, -+-8.06936590817051296876e-03, -+-8.03375624675719754442e-03, -+-7.99358581882871586932e-03, -+-7.94888110172140179011e-03, -+-7.89967114138754450403e-03, -+-7.84598753382080051078e-03, -+-7.78786440504017178632e-03, -+-7.72533838964500462615e-03, -+-7.65844860795453739877e-03, -+-7.58723664174604933708e-03, -+-7.51174650860678399383e-03, -+-7.43202463491451133931e-03, -+-7.34811982746492921986e-03, -+-7.26008324376091473962e-03, -+-7.16796836098336151433e-03, -+-7.07183094366188418067e-03, -+-6.97172901006430818793e-03, -+-6.86772279732582834055e-03, -+-6.75987472533817052023e-03, -+-6.64824935942080145340e-03, -+-6.53291337179604837682e-03, -+-6.41393550189129496575e-03, -+-6.29138651549170698635e-03, -+-6.16533916276751359220e-03, -+-6.03586813520128485228e-03, -+-5.90305002144024624361e-03, -+-5.76696326209861012679e-03, -+-5.62768810353925751089e-03, -+-5.48530655065889230504e-03, -+-5.33990231870646887141e-03, -+-5.19156078416207946574e-03, -+-5.04036893470575456805e-03, -+-4.88641531830454143442e-03, -+-4.72978999144895145140e-03, -+-4.57058446656796041330e-03, -+-4.40889165865240156839e-03, -+-4.24480583112071818697e-03, -+-4.07842254095536725644e-03, -+-3.90983858314355049030e-03, -+-3.73915193445415730208e-03, -+-3.56646169658344580969e-03, -+-3.39186803870199487382e-03, -+-3.21547213943741911138e-03, -+-3.03737612832535950474e-03, -+-2.85768302676162435152e-03, -+-2.67649668849279489050e-03, -+-2.49392173967607306759e-03, -+-2.31006351854499665868e-03, -+-2.12502801471515026521e-03, -+-1.93892180816497236052e-03, -+-1.75185200792604364207e-03, -+-1.56392619051968551937e-03, -+-1.37525233817362515544e-03, -+-1.18593877685428585739e-03, -+-9.96094114151082135611e-04, -+-8.05827177048465143755e-04, -+-6.15246949619699455385e-04, -+-4.24462510679590970634e-04, -+-2.33582971431131201836e-04, -+-4.27174131418600218075e-05, -+ 1.48025175115281873829e-04, -+ 3.38535958618741729398e-04, -+ 5.28706319021235741570e-04, -+ 7.18427916200129542020e-04, -+ 9.07592749900823655106e-04, -+ 1.09609322113959862730e-03, -+ 1.28382219332944988964e-03, -+ 1.47067305309492128707e-03, -+ 1.65653977074134688835e-03, -+ 1.84131696034424701021e-03, -+ 2.02489993942486920173e-03, -+ 2.20718478817801639844e-03, -+ 2.38806840821935862512e-03, -+ 2.56744858081750862433e-03, -+ 2.74522402457949956170e-03, -+ 2.92129445255769277026e-03, -+ 3.09556062874293989526e-03, -+ 3.26792442391583577016e-03, -+ 3.43828887082240275061e-03, -+ 3.60655821864397721499e-03, -+ 3.77263798673060360075e-03, -+ 3.93643501756839753886e-03, -+ 4.09785752894968862553e-03, -+ 4.25681516531844095913e-03, -+ 4.41321904826232503521e-03, -+ 4.56698182612100180705e-03, -+ 4.71801772268583795300e-03, -+ 4.86624258496219565945e-03, -+ 5.01157392996826912823e-03, -+ 5.15393099054442353768e-03, -+ 5.29323476014809113366e-03, -+ 5.42940803660817671028e-03, -+ 5.56237546481617214228e-03, -+ 5.69206357833054472223e-03, -+ 5.81840083986934729354e-03, -+ 5.94131768067147035539e-03, -+ 6.06074653870333594774e-03, -+ 6.17662189569052801769e-03, -+ 6.28888031295409682953e-03, -+ 6.39746046603201657527e-03, -+ 6.50230317806734740144e-03, -+ 6.60335145194352116094e-03, -+ 6.70055050115188084031e-03, -+ 6.79384777937258772795e-03, -+ 6.88319300875362728720e-03, -+ 6.96853820687349644752e-03, -+ 7.04983771237240302437e-03, -+ 7.12704820923858520243e-03, -+ 7.20012874973695923136e-03, -+ 7.26904077596829921448e-03, -+ 7.33374814004676342516e-03, -+ 7.39421712288685674397e-03, -+ 7.45041645158874780291e-03, -+ 7.50231731541360375576e-03, -+ 7.54989338034125958415e-03, -+ 7.59312080220247119511e-03, -+ 7.63197823837959577614e-03, -+ 7.66644685807015349721e-03, -+ 7.69651035110831445440e-03, -+ 7.72215493534070089587e-03, -+ 7.74336936255298931286e-03, -+ 7.76014492294555859042e-03, -+ 7.77247544815607566138e-03, -+ 7.78035731282916958457e-03, -+ 7.78378943473276123377e-03, -+ 7.78277327342252397968e-03, -+ 7.77731282745607217788e-03, -+ 7.76741463015983343160e-03, -+ 7.75308774395181993927e-03, -+ 7.73434375322510497819e-03, -+ 7.71119675579651046859e-03, -+ 7.68366335292724762090e-03, -+ 7.65176263792180597761e-03, -+ 7.61551618331250072119e-03, -+ 7.57494802663899804984e-03, -+ 7.53008465483087727904e-03, -+ 7.48095498720392076963e-03, -+ 7.42759035708089564165e-03, -+ 7.37002449204788440129e-03, -+ 7.30829349285897541394e-03, -+ 7.24243581100231150621e-03, -+ 7.17249222494118019583e-03, -+ 7.09850581504455676457e-03, -+ 7.02052193722279248289e-03, -+ 6.93858819528464596665e-03, -+ 6.85275441203157895803e-03, -+ 6.76307259910770459943e-03, -+ 6.66959692562291064227e-03, -+ 6.57238368556857608521e-03, -+ 6.47149126404455293793e-03, -+ 6.36698010231910756229e-03, -+ 6.25891266174058436000e-03, -+ 6.14735338652398939641e-03, -+ 6.03236866543420662684e-03, -+ 5.91402679238786036647e-03, -+ 5.79239792599798089534e-03, -+ 5.66755404808486160789e-03, -+ 5.53956892117803134656e-03, -+ 5.40851804503346585140e-03, -+ 5.27447861219351547823e-03, -+ 5.13752946261299917735e-03, -+ 4.99775103738003996512e-03, -+ 4.85522533155877469846e-03, -+ 4.71003584618005094464e-03, -+ 4.56226753940958736772e-03, -+ 4.41200677692144428016e-03, -+ 4.25934128150591128498e-03, -+ 4.10436008194120516279e-03, -+ 3.94715346115854636561e-03, -+ 3.78781290373112009690e-03, -+ 3.62643104271654281509e-03, -+ 3.46310160588530037765e-03, -+ 3.29791936136483157180e-03, -+ 3.13098006273033763885e-03, -+ 2.96238039357679455374e-03, -+ 2.79221791160092977502e-03, -+ 2.62059099222753267427e-03, -+ 2.44759877181191781020e-03, -+ 2.27334109045146740002e-03, -+ 2.09791843443869838876e-03, -+ 1.92143187839023546828e-03, -+ 1.74398302708383490592e-03, -+ 1.56567395703608109106e-03, -+ 1.38660715785749919481e-03, -+ 1.20688547341501702971e-03, -+ 1.02661204283784578128e-03, -+ 8.45890241399772859106e-04, -+ 6.64823621311828307986e-04, -+ 4.83515852459311156267e-04, -+ 3.02070663116303390200e-04, -+ 1.20591780673772898239e-04, -+-6.08171275885414341889e-05, -+-2.42052513649585246663e-04, -+-4.23011007780704729672e-04, -+-6.03589477433417857279e-04, -+-7.83685085946226591899e-04, -+-9.63195351037734169043e-04, -+-1.14201820305262708236e-03, -+-1.32005204292819870032e-03, -+-1.49719579984629639312e-03, -+-1.67334898854166894480e-03, -+-1.84841176623110319682e-03, -+-2.02228498913186371597e-03, -+-2.19487026853879690913e-03, -+-2.36607002642698479797e-03, -+-2.53578755054913694555e-03, -+-2.70392704899653085748e-03, -+-2.87039370419339950197e-03, -+-3.03509372629227804768e-03, -+-3.19793440594374599878e-03, -+-3.35882416640786475581e-03, -+-3.51767261497890407207e-03, -+-3.67439059369556366569e-03, -+-3.82889022930704356340e-03, -+-3.98108498246762219919e-03, -+-4.13088969613195546721e-03, -+-4.27822064312436464023e-03, -+-4.42299557285530213491e-03, -+-4.56513375715911651903e-03, -+-4.70455603522795286209e-03, -+-4.84118485761577625054e-03, -+-4.97494432928909796621e-03, -+-5.10576025170110612411e-03, -+-5.23356016386354247483e-03, -+-5.35827338239640901113e-03, -+-5.47983104053158340957e-03, -+-5.59816612604972611844e-03, -+-5.71321351812927209768e-03, -+-5.82491002308763421852e-03, -+-5.93319440899438971249e-03, -+-6.03800743913827410447e-03, -+-6.13929190432966741947e-03, -+-6.23699265402067378611e-03, -+-6.33105662622569179826e-03, -+-6.42143287622725950775e-03, -+-6.50807260405082601412e-03, -+-6.59092918069416680571e-03, -+-6.66995817309711056670e-03, -+-6.74511736783881075269e-03, -+-6.81636679354884200688e-03, -+-6.88366874202207389838e-03, -+-6.94698778802482330014e-03, -+-7.00629080778204620106e-03, -+-7.06154699613719197271e-03, -+-7.11272788237445920123e-03, -+-7.15980734469658271213e-03, -+-7.20276162335014690646e-03, -+-7.24156933239256637991e-03, -+-7.27621147009427024499e-03, -+-7.30667142797224253986e-03, -+-7.33293499844991664843e-03, -+-7.35499038114030730118e-03, -+-7.37282818775028547797e-03, -+-7.38644144560350775219e-03, -+-7.39582559978183007310e-03, -+-7.40097851388428658315e-03, -+-7.40190046940486859328e-03, -+-7.39859416373013153989e-03, -+-7.39106470675889026811e-03, -+-7.37931961614715723613e-03, -+-7.36336881118193880419e-03, -+-7.34322460528822728437e-03, -+-7.31890169717512584224e-03, -+-7.29041716062642924934e-03, -+-7.25779043294308163353e-03, -+-7.22104330204492456807e-03, -+-7.18019989224008559070e-03, -+-7.13528664867118991161e-03, -+-7.08633232044840466468e-03, -+-7.03336794247966679700e-03, -+-6.97642681600977102030e-03, -+-6.91554448788011654620e-03, -+-6.85075872852217854225e-03, -+-6.78210950869807035341e-03, -+-6.70963897500246285455e-03, -+-6.63339142414092006877e-03, -+-6.55341327599992442415e-03, -+-6.46975304552541326253e-03, -+-6.38246131342605754061e-03, -+-6.29159069572002467574e-03, -+-6.19719581214200551655e-03, -+-6.09933325343054149464e-03, -+-5.99806154751515805540e-03, -+-5.89344112462262485069e-03, -+-5.78553428132379601867e-03, -+-5.67440514354219504439e-03, -+-5.56011962854616095114e-03, -+-5.44274540594681839611e-03, -+-5.32235185772599213305e-03, -+-5.19901003731562585258e-03, -+-5.07279262775460568907e-03, -+-4.94377389894712446911e-03, -+-4.81202966404692660668e-03, -+-4.67763723499383179960e-03, -+-4.54067537722822531232e-03, -+-4.40122426361012723806e-03, -+-4.25936542756916083213e-03, -+-4.11518171551450429035e-03, -+-3.96875723852973399941e-03, -+-3.82017732338308995885e-03, -+-3.66952846288120431220e-03, -+-3.51689826559387639163e-03, -+-3.36237540498054293669e-03, -+-3.20604956794714058416e-03, -+-3.04801140286350535219e-03, -+-2.88835246707072135566e-03, -+-2.72716517391074315599e-03, -+-2.56454273930563836012e-03, -+-2.40057912792011364511e-03, -+-2.23536899893777120732e-03, -+-2.06900765148108206626e-03, -+-1.90159096970791930900e-03, -+-1.73321536761559679037e-03, -+-1.56397773358425175305e-03, -+-1.39397537469151283109e-03, -+-1.22330596083027954082e-03, -+-1.05206746866192031586e-03, -+-8.80358125436270775623e-04, -+-7.08276352712239277640e-04, -+-5.35920710009009110958e-04, -+-3.63389838422367814508e-04, -+-1.90782404235573607330e-04, -+-1.81970425606722737690e-05, -+ 1.54267698961177570456e-04, -+ 3.26513416366015622218e-04, -+ 4.98441905449340362869e-04, -+ 6.69955217690751999443e-04, -+ 8.40955715991319185942e-04, -+ 1.01134613018985628115e-03, -+ 1.18102961232867528438e-03, -+ 1.34990979163519928159e-03, -+ 1.51789082919096310863e-03, -+ 1.68487747225296133520e-03, -+ 1.85077510820205867401e-03, -+ 2.01548981808303672575e-03, -+ 2.17892842970867023702e-03, -+ 2.34099857029698189825e-03, -+ 2.50160871861258458579e-03, -+ 2.66066825658141034583e-03, -+ 2.81808752035150444221e-03, -+ 2.97377785076984252691e-03, -+ 3.12765164324742489868e-03, -+ 3.27962239698395725818e-03, -+ 3.42960476352574062178e-03, -+ 3.57751459462877022255e-03, -+ 3.72326898939903325192e-03, -+ 3.86678634068614995867e-03, -+ 4.00798638070307827741e-03, -+ 4.14679022584586980810e-03, -+ 4.28312042068948461981e-03, -+ 4.41690098113505479061e-03, -+ 4.54805743668363141041e-03, -+ 4.67651687181444911112e-03, -+ 4.80220796644356944655e-03, -+ 4.92506103544097621760e-03, -+ 5.04500806718418456226e-03, -+ 5.16198276112742483052e-03, -+ 5.27592056436465041414e-03, -+ 5.38675870716774727459e-03, -+ 5.49443623747928808210e-03, -+ 5.59889405434115926957e-03, -+ 5.70007494024133646443e-03, -+ 5.79792359236085651231e-03, -+ 5.89238665270259628914e-03, -+ 5.98341273708859113650e-03, -+ 6.07095246300716831489e-03, -+ 6.15495847629641840842e-03, -+ 6.23538547664926560282e-03, -+ 6.31219024192670834228e-03, -+ 6.38533165126559023456e-03, -+ 6.45477070696955871482e-03, -+ 6.52047055517085416554e-03, -+ 6.58239650525249079399e-03, -+ 6.64051604802040618125e-03, -+ 6.69479887261659797199e-03, -+ 6.74521688216371366476e-03, -+ 6.79174420813415374160e-03, -+ 6.83435722343555315111e-03, -+ 6.87303455420689574096e-03, -+ 6.90775709031867489462e-03, -+ 6.93850799457300902728e-03, -+ 6.96527271059846700418e-03, -+ 6.98803896943703088673e-03, -+ 7.00679679481976212113e-03, -+ 7.02153850712936879186e-03, -+ 7.03225872604836682589e-03, -+ 7.03895437189253850990e-03, -+ 7.04162466562946627591e-03, -+ 7.04027112758361280076e-03, -+ 7.03489757482926060528e-03, -+ 7.02551011727416043623e-03, -+ 7.01211715243688429866e-03, -+ 6.99472935892183310391e-03, -+ 6.97335968859667636177e-03, -+ 6.94802335747783921666e-03, -+ 6.91873783532993662237e-03, -+ 6.88552283398612303966e-03, -+ 6.84840029439715090170e-03, -+ 6.80739437241735696749e-03, -+ 6.76253142333664569730e-03, -+ 6.71383998516838706450e-03, -+ 6.66135076070345499843e-03, -+ 6.60509659834187211336e-03, -+ 6.54511247171371459558e-03, -+ 6.48143545810195200602e-03, -+ 6.41410471568024109779e-03, -+ 6.34316145958003368976e-03, -+ 6.26864893680093449718e-03, -+ 6.19061239997995525763e-03, -+ 6.10909908003542511529e-03, -+ 6.02415815770170753884e-03, -+ 5.93584073397201983369e-03, -+ 5.84419979946794454495e-03, -+ 5.74929020275181338478e-03, -+ 5.65116861760294342948e-03, -+ 5.54989350927625503529e-03, -+ 5.44552509976333788677e-03, -+ 5.33812533207639414862e-03, -+ 5.22775783357706802512e-03, -+ 5.11448787837056554478e-03, -+ 4.99838234878814680062e-03, -+ 4.87950969598033648666e-03, -+ 4.75793989964418302663e-03, -+ 4.63374442690764765801e-03, -+ 4.50699619039651548646e-03, -+ 4.37776950550668349227e-03, -+ 4.24614004690850900536e-03, -+ 4.11218480430692711475e-03, -+ 3.97598203748505876071e-03, -+ 3.83761123065512682953e-03, -+ 3.69715304614688265381e-03, -+ 3.55468927745570878116e-03, -+ 3.41030280168198429019e-03, -+ 3.26407753138687091454e-03, -+ 3.11609836589335845169e-03, -+ 2.96645114206062080267e-03, -+ 2.81522258455971620753e-03, -+ 2.66250025568077076238e-03, -+ 2.50837250469876198167e-03, -+ 2.35292841682855887256e-03, -+ 2.19625776179852754202e-03, -+ 2.03845094207133958539e-03, -+ 1.87959894074250246331e-03, -+ 1.71979326914796590980e-03, -+ 1.55912591420826569452e-03, -+ 1.39768928554081183456e-03, -+ 1.23557616237141834267e-03, -+ 1.07287964027444793387e-03, -+ 9.09693077772073983855e-04, -+ 7.46110042824598817396e-04, -+ 5.82224259240568249411e-04, -+ 4.18129553038750639577e-04, -+ 2.53919798792089188456e-04, -+ 8.96888659844675517445e-05, -+-7.44694345896905772258e-05, -+-2.38461404350935065157e-04, -+-4.02193510356873369562e-04, -+-5.65572438589027263849e-04, -+-7.28505147074144480956e-04, -+-8.90898918810926966801e-04, -+-1.05266141447140325338e-03, -+-1.21370072484502889917e-03, -+-1.37392542300045520862e-03, -+-1.53324461613069552152e-03, -+-1.69156799705494180486e-03, -+-1.84880589534694829770e-03, -+-2.00486932806183924816e-03, -+-2.15967005003114657924e-03, -+-2.31312060369968800280e-03, -+-2.46513436847466778021e-03, -+-2.61562560955978882365e-03, -+-2.76450952624671683969e-03, -+-2.91170229963722427408e-03, -+-3.05712113976792237979e-03, -+-3.20068433211290236454e-03, -+-3.34231128343639950426e-03, -+-3.48192256697167851556e-03, -+-3.61943996689886252766e-03, -+-3.75478652209826086611e-03, -+-3.88788656915454566149e-03, -+-4.01866578458679943320e-03, -+-4.14705122628237707327e-03, -+-4.27297137411052248279e-03, -+-4.39635616969335368820e-03, -+-4.51713705531228693069e-03, -+-4.63524701192860166116e-03, -+-4.75062059629599835880e-03, -+-4.86319397714623982004e-03, -+-4.97290497042671315875e-03, -+-5.07969307357067009767e-03, -+-5.18349949878208187543e-03, -+-5.28426720531614563942e-03, -+-5.38194093073713492048e-03, -+-5.47646722113816729338e-03, -+-5.56779446030545265012e-03, -+-5.65587289781075818612e-03, -+-5.74065467601772051742e-03, -+-5.82209385598695533526e-03, -+-5.90014644226589859283e-03, -+-5.97477040655035752242e-03, -+-6.04592571020508891960e-03, -+-6.11357432563106647366e-03, -+-6.17768025646842598719e-03, -+-6.23820955662453009022e-03, -+-6.29513034811653680867e-03, -+-6.34841283772002301644e-03, -+-6.39802933241444878737e-03, -+-6.44395425361771970879e-03, -+-6.48616415020282759824e-03, -+-6.52463771028981894679e-03, -+-6.55935577180693108607e-03, -+-6.59030133181688366345e-03, -+-6.61745955460281767846e-03, -+-6.64081777851058003420e-03, -+-6.66036552154464483316e-03, -+-6.67609448571504417863e-03, -+-6.68799856013396580579e-03, -+-6.69607382286100619867e-03, -+-6.70031854149736628978e-03, -+-6.70073317252893423113e-03, -+-6.69732035942032649656e-03, -+-6.69008492946125080808e-03, -+-6.67903388936833767447e-03, -+-6.66417641964580503844e-03, -+-6.64552386770900921364e-03, -+-6.62308973977570117353e-03, -+-6.59688969153084895508e-03, -+-6.56694151757089734922e-03, -+-6.53326513963461280587e-03, -+-6.49588259362816715370e-03, -+-6.45481801545267231540e-03, -+-6.41009762564318658074e-03, -+-6.36174971282886698998e-03, -+-6.30980461602472040422e-03, -+-6.25429470576554895345e-03, -+-6.19525436409436129626e-03, -+-6.13271996341689488996e-03, -+-6.06672984423554158967e-03, -+-5.99732429177634272788e-03, -+-5.92454551152269380532e-03, -+-5.84843760367088558172e-03, -+-5.76904653652344102249e-03, -+-5.68642011883526560245e-03, -+-5.60060797112928252656e-03, -+-5.51166149599965557448e-03, -+-5.41963384741940817219e-03, -+-5.32457989907073915570e-03, -+-5.22655621171772520606e-03, -+-5.12562099963942419123e-03, -+-5.02183409614448406089e-03, -+-4.91525691818681109702e-03, -+-4.80595243010374650883e-03, -+-4.69398510649735815209e-03, -+-4.57942089428194781808e-03, -+-4.46232717391857429401e-03, -+-4.34277271986037178425e-03, -+-4.22082766023175893350e-03, -+-4.09656343576443940369e-03, -+-3.97005275801442028549e-03, -+-3.84136956688634241541e-03, -+-3.71058898748600606704e-03, -+-3.57778728632999511172e-03, -+-3.44304182693580453772e-03, -+-3.30643102481900002035e-03, -+-3.16803430192340654270e-03, -+-3.02793204051044796687e-03, -+-2.88620553653542132044e-03, -+-2.74293695253627518860e-03, -+-2.59820927006318425079e-03, -+-2.45210624167601677625e-03, -+-2.30471234253809770590e-03, -+-2.15611272163192388071e-03, -+-2.00639315262918054017e-03, -+-1.85563998443917131317e-03, -+-1.70394009146592178422e-03, -+-1.55138082360318694218e-03, -+-1.39804995599510811267e-03, -+-1.24403563859131600054e-03, -+-1.08942634552675727232e-03, -+-9.34310824353430722893e-04, -+-7.78778045154488265424e-04, -+-6.22917149569355557345e-04, -+-4.66817399759168381000e-04, -+-3.10568127341177748629e-04, -+-1.54258682322715390484e-04, -+ 2.02161793800758804308e-06, -+ 1.58183539713823383393e-04, -+ 3.14137983804192602675e-04, -+ 4.69796036316565991924e-04, -+ 6.25069019303870366394e-04, -+ 7.79868541228004980535e-04, -+ 9.34106547223279145772e-04, -+ 1.08769536912991875675e-03, -+ 1.24054777526851588154e-03, -+ 1.39257701992830692887e-03, -+ 1.54369689254121996921e-03, -+ 1.69382176651257680342e-03, -+ 1.84286664768265498297e-03, -+ 1.99074722239030730067e-03, -+ 2.13737990511212458747e-03, -+ 2.28268188564996954079e-03, -+ 2.42657117584086636994e-03, -+ 2.56896665576163141242e-03, -+ 2.70978811940393539068e-03, -+ 2.84895631979290410787e-03, -+ 2.98639301352399176917e-03, -+ 3.12202100469403682342e-03, -+ 3.25576418820130086482e-03, -+ 3.38754759238860721909e-03, -+ 3.51729742100961384824e-03, -+ 3.64494109449081107530e-03, -+ 3.77040729046844522859e-03, -+ 3.89362598357706262905e-03, -+ 4.01452848446753798178e-03, -+ 4.13304747803329777800e-03, -+ 4.24911706082250345551e-03, -+ 4.36267277761673982761e-03, -+ 4.47365165715500091859e-03, -+ 4.58199224698366443242e-03, -+ 4.68763464741256234702e-03, -+ 4.79052054456022714107e-03, -+ 4.89059324246701558614e-03, -+ 4.98779769426149852812e-03, -+ 5.08208053236177022260e-03, -+ 5.17339009769468647498e-03, -+ 5.26167646791786663280e-03, -+ 5.34689148462896227804e-03, -+ 5.42898877954677526458e-03, -+ 5.50792379965109931556e-03, -+ 5.58365383126675513675e-03, -+ 5.65613802307947735604e-03, -+ 5.72533740807081026336e-03, -+ 5.79121492436091966222e-03, -+ 5.85373543494751170241e-03, -+ 5.91286574633094908632e-03, -+ 5.96857462601572963390e-03, -+ 6.02083281887862576537e-03, -+ 6.06961306239588074124e-03, -+ 6.11489010072096151466e-03, -+ 6.15664069760550429489e-03, -+ 6.19484364815777593938e-03, -+ 6.22947978943221101350e-03, -+ 6.26053200984478218361e-03, -+ 6.28798525741010132240e-03, -+ 6.31182654679610100068e-03, -+ 6.33204496519319988412e-03, -+ 6.34863167699579490633e-03, -+ 6.36157992729387798680e-03, -+ 6.37088504417378069522e-03, -+ 6.37654443982793583956e-03, -+ 6.37855761047346776077e-03, -+ 6.37692613508076319023e-03, -+ 6.37165367291377907760e-03, -+ 6.36274595988404155500e-03, -+ 6.35021080372164415523e-03, -+ 6.33405807796656641212e-03, -+ 6.31429971478498618803e-03, -+ 6.29094969661516800058e-03, -+ 6.26402404664898240089e-03, -+ 6.23354081815498742292e-03, -+ 6.19952008265027120631e-03, -+ 6.16198391692862612601e-03, -+ 6.12095638895326834422e-03, -+ 6.07646354262293339477e-03, -+ 6.02853338142123572341e-03, -+ 5.97719585095891989962e-03, -+ 5.92248282042035986694e-03, -+ 5.86442806292514912103e-03, -+ 5.80306723481761356498e-03, -+ 5.73843785389547937636e-03, -+ 5.67057927659296145267e-03, -+ 5.59953267413014401516e-03, -+ 5.52534100764390679467e-03, -+ 5.44804900231556955836e-03, -+ 5.36770312051036008194e-03, -+ 5.28435153394469885046e-03, -+ 5.19804409489867894761e-03, -+ 5.10883230648978472338e-03, -+ 5.01676929202641425087e-03, -+ 4.92190976345897174271e-03, -+ 4.82430998894739331007e-03, -+ 4.72402775956395210022e-03, -+ 4.62112235515180647810e-03, -+ 4.51565450935827780027e-03, -+ 4.40768637386434840308e-03, -+ 4.29728148183127715148e-03, -+ 4.18450471058511973971e-03, -+ 4.06942224356152213588e-03, -+ 3.95210153153399603582e-03, -+ 3.83261125314650298243e-03, -+ 3.71102127477429544200e-03, -+ 3.58740260973707415088e-03, -+ 3.46182737688722997824e-03, -+ 3.33436875859757829790e-03, -+ 3.20510095817370162935e-03, -+ 3.07409915671442122986e-03, -+ 2.94143946944645578653e-03, -+ 2.80719890155818000560e-03, -+ 2.67145530355801606032e-03, -+ 2.53428732618405597871e-03, -+ 2.39577437488870843840e-03, -+ 2.25599656392876232389e-03, -+ 2.11503467008288762591e-03, -+ 1.97297008602663600726e-03, -+ 1.82988477338951447716e-03, -+ 1.68586121552325774765e-03, -+ 1.54098237000600303548e-03, -+ 1.39533162091338329772e-03, -+ 1.24899273087909832951e-03, -+ 1.10204979297680240487e-03, -+ 9.54587182448630219150e-04, -+ 8.06689508308766145897e-04, -+ 6.58441564849216722996e-04, -+ 5.09928283076855021032e-04, -+ 3.61234682107735086132e-04, -+ 2.12445820547849437534e-04, -+ 6.36467478874062951924e-05, -+-8.50775440627651754989e-05, -+-2.33642169667408998316e-04, -+-3.81962397863639291536e-04, -+-5.29953700435123313019e-04, -+-6.77531800134304070492e-04, -+-8.24612718624688793498e-04, -+-9.71112824217015813653e-04, -+-1.11694887937219939321e-03, -+-1.26203808794284771423e-03, -+-1.40629814212836251781e-03, -+-1.54964726911566716763e-03, -+-1.69200427737972594958e-03, -+-1.83328860261746241604e-03, -+-1.97342035328964800558e-03, -+-2.11232035574377557952e-03, -+-2.24991019889414630914e-03, -+-2.38611227843281599459e-03, -+-2.52084984054647175469e-03, -+-2.65404702511572903115e-03, -+-2.78562890837174507302e-03, -+-2.91552154498523870621e-03, -+-3.04365200956643270486e-03, -+-3.16994843755161225321e-03, -+-3.29434006545274672348e-03, -+-3.41675727044862646842e-03, -+-3.53713160929501439778e-03, -+-3.65539585653244531588e-03, -+-3.77148404196936751220e-03, -+-3.88533148742125408054e-03, -+-3.99687484268407104693e-03, -+-4.10605212072268164342e-03, -+-4.21280273205412725268e-03, -+-4.31706751830841783946e-03, -+-4.41878878494509144681e-03, -+-4.51791033311113327670e-03, -+-4.61437749061991125260e-03, -+-4.70813714203596311164e-03, -+-4.79913775784764073951e-03, -+-4.88732942271308690857e-03, -+-4.97266386276206447808e-03, -+-5.05509447194163030054e-03, -+-5.13457633738856073641e-03, -+-5.21106626381633106920e-03, -+-5.28452279690304685400e-03, -+-5.35490624566773484178e-03, -+-5.42217870382271597413e-03, -+-5.48630407009116985440e-03, -+-5.54724806747858376760e-03, -+-5.60497826148812720165e-03, -+-5.65946407726994771964e-03, -+-5.71067681569638677108e-03, -+-5.75858966835306532173e-03, -+-5.80317773143970965649e-03, -+-5.84441801857288768113e-03, -+-5.88228947248397703723e-03, -+-5.91677297560679570088e-03, -+-5.94785135954983314177e-03, -+-5.97550941344791256699e-03, -+-5.99973389119013312404e-03, -+-6.02051351752001286111e-03, -+-6.03783899300595460619e-03, -+-6.05170299787924879931e-03, -+-6.06210019473904081905e-03, -+-6.06902723012296262811e-03, -+-6.07248273494360914920e-03, -+-6.07246732379158708770e-03, -+-6.06898359310613279977e-03, -+-6.06203611821533403653e-03, -+-6.05163144924839458555e-03, -+-6.03777810592327594807e-03, -+-6.02048657121333555264e-03, -+-5.99976928389753336873e-03, -+-5.97564062999924889424e-03, -+-5.94811693311943397167e-03, -+-5.91721644367056848202e-03, -+-5.88295932701797356923e-03, -+-5.84536765053670151482e-03, -+-5.80446536959165673014e-03, -+-5.76027831244998057142e-03, -+-5.71283416413511518916e-03, -+-5.66216244923269020756e-03, -+-5.60829451365809760616e-03, -+-5.55126350539837404990e-03, -+-5.49110435423857436155e-03, -+-5.42785375048610279486e-03, -+-5.36155012270514343825e-03, -+-5.29223361447536504165e-03, -+-5.21994606018790722329e-03, -+-5.14473095989484690421e-03, -+-5.06663345322490039219e-03, -+-4.98570029238308044806e-03, -+-4.90197981424923389521e-03, -+-4.81552191159239240809e-03, -+-4.72637800341784222735e-03, -+-4.63460100446517250100e-03, -+-4.54024529387421233589e-03, -+-4.44336668303834617794e-03, -+-4.34402238266374564335e-03, -+-4.24227096905429278129e-03, -+-4.13817234964060018387e-03, -+-4.03178772777628563473e-03, -+-3.92317956681902026833e-03, -+-3.81241155351897623854e-03, -+-3.69954856073620007989e-03, -+-3.58465660950824235517e-03, -+-3.46780283048990500827e-03, -+-3.34905542478881141852e-03, -+-3.22848362421805775910e-03, -+-3.10615765099010905648e-03, -+-2.98214867687515662251e-03, -+-2.85652878184750828178e-03, -+-2.72937091224384606111e-03, -+-2.60074883845852087780e-03, -+-2.47073711219897686545e-03, -+-2.33941102332713016590e-03, -+-2.20684655631157985653e-03, -+-2.07312034631475673035e-03, -+-1.93830963494213536630e-03, -+-1.80249222567671618656e-03, -+-1.66574643902788789573e-03, -+-1.52815106741598333122e-03, -+-1.38978532982251450426e-03, -+-1.25072882622996486672e-03, -+-1.11106149187807385498e-03, -+-9.70863551362263440571e-04, -+-8.30215472601808523491e-04, -+-6.89197920702451245073e-04, -+-5.47891711741154406080e-04, -+-4.06377766498845327103e-04, -+-2.64737064168374847291e-04, -+-1.23050596061868546460e-04, -+ 1.86006806518760801038e-05, -+ 1.60135889158271910344e-04, -+ 3.01474279126209918772e-04, -+ 4.42535272731790253753e-04, -+ 5.83238510548296702242e-04, -+ 7.23503897278638991204e-04, -+ 8.63251647300782411557e-04, -+ 1.00240233000493386348e-03, -+ 1.14087691489260295227e-03, -+ 1.27859681641420436932e-03, -+ 1.41548393851902284610e-03, -+ 1.55146071889291931739e-03, -+ 1.68645017285750319601e-03, -+ 1.82037593690758878195e-03, -+ 1.95316231186109341353e-03, -+ 2.08473430559764265693e-03, -+ 2.21501767536104888362e-03, -+ 2.34393896960388269796e-03, -+ 2.47142556934688362516e-03, -+ 2.59740572903363739141e-03, -+ 2.72180861685599774502e-03, -+ 2.84456435452711767914e-03, -+ 2.96560405648055866804e-03, -+ 3.08485986847369889757e-03, -+ 3.20226500557270433653e-03, -+ 3.31775378949923562683e-03, -+ 3.43126168531712261514e-03, -+ 3.54272533743877921647e-03, -+ 3.65208260493136678895e-03, -+ 3.75927259610300519913e-03, -+ 3.86423570235000643155e-03, -+ 3.96691363124569706944e-03, -+ 4.06724943885357868856e-03, -+ 4.16518756124574941052e-03, -+ 4.26067384521043503870e-03, -+ 4.35365557813031326534e-03, -+ 4.44408151701685457530e-03, -+ 4.53190191668225664939e-03, -+ 4.61706855703673899743e-03, -+ 4.69953476949353052966e-03, -+ 4.77925546246841040365e-03, -+ 4.85618714595966241565e-03, -+ 4.93028795519530847746e-03, -+ 5.00151767333411288730e-03, -+ 5.06983775320908342660e-03, -+ 5.13521133810092809957e-03, -+ 5.19760328153088136532e-03, -+ 5.25698016606174298865e-03, -+ 5.31331032109820002030e-03, -+ 5.36656383967527069595e-03, -+ 5.41671259422796692179e-03, -+ 5.46373025133245135421e-03, -+ 5.50759228541199737789e-03, -+ 5.54827599139992924671e-03, -+ 5.58576049635388805631e-03, -+ 5.62002677001447251137e-03, -+ 5.65105763430437738060e-03, -+ 5.67883777176233280753e-03, -+ 5.70335373290816339403e-03, -+ 5.72459394253559995802e-03, -+ 5.74254870493012391924e-03, -+ 5.75721020800935671946e-03, -+ 5.76857252638474007206e-03, -+ 5.77663162334343931875e-03, -+ 5.78138535175009606049e-03, -+ 5.78283345386879782390e-03, -+ 5.78097756010611391053e-03, -+ 5.77582118667672138324e-03, -+ 5.76736973219383122768e-03, -+ 5.75563047318704626432e-03, -+ 5.74061255855102051116e-03, -+ 5.72232700292902695532e-03, -+ 5.70078667903584773713e-03, -+ 5.67600630892513106918e-03, -+ 5.64800245420722570738e-03, -+ 5.61679350522356971021e-03, -+ 5.58239966918474238289e-03, -+ 5.54484295727977402612e-03, -+ 5.50414717076463597123e-03, -+ 5.46033788603883952356e-03, -+ 5.41344243871932310347e-03, -+ 5.36348990672138540431e-03, -+ 5.31051109235732010649e-03, -+ 5.25453850346318130510e-03, -+ 5.19560633356600486132e-03, -+ 5.13375044110239622114e-03, -+ 5.06900832770268514743e-03, -+ 5.00141911555166893133e-03, -+ 4.93102352384138312158e-03, -+ 4.85786384432904984332e-03, -+ 4.78198391601513880800e-03, -+ 4.70342909895635295087e-03, -+ 4.62224624722982427999e-03, -+ 4.53848368106374473741e-03, -+ 4.45219115815146792431e-03, -+ 4.36341984416594753926e-03, -+ 4.27222228249233334368e-03, -+ 4.17865236319510044427e-03, -+ 4.08276529124071765886e-03, -+ 3.98461755399166870500e-03, -+ 3.88426688799294646953e-03, -+ 3.78177224506918985281e-03, -+ 3.67719375775360296163e-03, -+ 3.57059270406730406081e-03, -+ 3.46203147167215485522e-03, -+ 3.35157352141467277523e-03, -+ 3.23928335028530935830e-03, -+ 3.12522645381305575613e-03, -+ 3.00946928791781488297e-03, -+ 2.89207923024227455538e-03, -+ 2.77312454098672077352e-03, -+ 2.65267432326827179087e-03, -+ 2.53079848302840103302e-03, -+ 2.40756768851164678139e-03, -+ 2.28305332933951632760e-03, -+ 2.15732747520132111738e-03, -+ 2.03046283418941569954e-03, -+ 1.90253271079930631401e-03, -+ 1.77361096362036439224e-03, -+ 1.64377196274210417119e-03, -+ 1.51309054689958370071e-03, -+ 1.38164198038311938042e-03, -+ 1.24950190973654160810e-03, -+ 1.11674632027006139751e-03, -+ 9.83451492411185164075e-04, -+ 8.49693957919833188497e-04, -+ 7.15550455992367039418e-04, -+ 5.81097889279802068928e-04, -+ 4.46413279844896004802e-04, -+ 3.11573725084547952131e-04, -+ 1.76656353640993331018e-04, -+ 4.17382813286828151375e-05, -+-9.31034328996876200512e-05, -+-2.27791830921029737336e-04, -+-3.62250099320780654093e-04, -+-4.96401613154530668010e-04, -+-6.30169979571938514672e-04, -+-7.63479081274113916857e-04, -+-8.96253119781942569726e-04, -+-1.02841665849006422100e-03, -+-1.15989466548260746100e-03, -+-1.29061255608525294117e-03, -+-1.42049623513107697685e-03, -+-1.54947213891506270153e-03, -+-1.67746727681411891310e-03, -+-1.80440927254837480201e-03, -+-1.93022640506252275011e-03, -+-2.05484764900032337159e-03, -+-2.17820271475373814299e-03, -+-2.30022208806093461653e-03, -+-2.42083706913298482913e-03, -+-2.53997981128547666713e-03, -+-2.65758335905543320934e-03, -+-2.77358168577903838048e-03, -+-2.88790973061320895704e-03, -+-3.00050343497665914297e-03, -+-3.11129977839202497697e-03, -+-3.22023681370834334581e-03, -+-3.32725370168476981825e-03, -+-3.43229074491519740159e-03, -+-3.53528942107627329461e-03, -+-3.63619241547926243599e-03, -+-3.73494365290821112024e-03, -+-3.83148832872629279550e-03, -+-3.92577293923390257396e-03, -+-4.01774531126125340058e-03, -+-4.10735463097804467947e-03, -+-4.19455147190698693360e-03, -+-4.27928782212313139899e-03, -+-4.36151711062546069975e-03, -+-4.44119423286594081079e-03, -+-4.51827557542231091070e-03, -+-4.59271903980044363808e-03, -+-4.66448406535440850823e-03, -+-4.73353165131090974221e-03, -+-4.79982437788653917843e-03, -+-4.86332642648651045092e-03, -+-4.92400359897397343206e-03, -+-4.98182333599925253331e-03, -+-5.03675473437993799497e-03, -+-5.08876856352186244387e-03, -+-5.13783728087296304166e-03, -+-5.18393504640126713545e-03, -+-5.22703773609024553021e-03, -+-5.26712295444329344635e-03, -+-5.30417004599272740029e-03, -+-5.33816010580571553151e-03, -+-5.36907598898301533646e-03, -+-5.39690231914530423041e-03, -+-5.42162549590326486165e-03, -+-5.44323370130771460457e-03, -+-5.46171690527704530721e-03, -+-5.47706686999947442440e-03, -+-5.48927715330848470243e-03, -+-5.49834311103008545329e-03, -+-5.50426189830165689398e-03, -+-5.50703246986195688040e-03, -+-5.50665557931325801155e-03, -+-5.50313377735658394718e-03, -+-5.49647140900193838936e-03, -+-5.48667460975575324578e-03, -+-5.47375130078852495386e-03, -+-5.45771118308641025457e-03, -+-5.43856573059035668105e-03, -+-5.41632818232791902330e-03, -+-5.39101353354278986507e-03, -+-5.36263852582782342415e-03, -+-5.33122163626806137848e-03, -+-5.29678306560053737545e-03, -+-5.25934472539848259925e-03, -+-5.21893022428794508411e-03, -+-5.17556485320526133559e-03, -+-5.12927556970489868793e-03, -+-5.08009098132678089954e-03, -+-5.02804132803355476738e-03, -+-4.97315846372916019885e-03, -+-4.91547583686848584689e-03, -+-4.85502847017122741990e-03, -+-4.79185293945155309919e-03, -+-4.72598735157650148841e-03, -+-4.65747132156595338576e-03, -+-4.58634594884884446570e-03, -+-4.51265379268859113254e-03, -+-4.43643884679333078136e-03, -+-4.35774651312552125521e-03, -+-4.27662357492689104710e-03, -+-4.19311816897408994737e-03, -+-4.10727975708242813713e-03, -+-4.01915909687342119000e-03, -+-3.92880821182439374240e-03, -+-3.83628036061678823893e-03, -+-3.74163000580234744730e-03, -+-3.64491278180403876011e-03, -+-3.54618546227291209921e-03, -+-3.44550592681680360740e-03, -+-3.34293312712312645080e-03, -+-3.23852705249417973515e-03, -+-3.13234869481537631791e-03, -+-3.02446001297665325452e-03, -+-2.91492389676846486157e-03, -+-2.80380413027231812501e-03, -+-2.69116535476798942814e-03, -+-2.57707303117848647925e-03, -+-2.46159340207523572031e-03, -+-2.34479345326362147856e-03, -+-2.22674087497457245249e-03, -+-2.10750402268079263524e-03, -+-1.98715187756321907606e-03, -+-1.86575400664854376166e-03, -+-1.74338052264242380010e-03, -+-1.62010204348048895799e-03, -+-1.49598965162051219212e-03, -+-1.37111485310015116836e-03, -+-1.24554953638238521431e-03, -+-1.11936593101341890638e-03, -+-9.92636566116329244550e-04, -+-8.65434228744452519431e-04, -+-7.37831922117954900481e-04, -+-6.09902823768643741718e-04, -+-4.81720243615482051399e-04, -+-3.53357581995873909833e-04, -+-2.24888287676710109473e-04, -+-9.63858158682636068570e-05, -+ 3.20764137345539367911e-05, -+ 1.60425058858032064824e-04, -+ 2.88586896482438703439e-04, -+ 4.16488864574161247057e-04, -+ 5.44058103695506324778e-04, -+ 6.71221998467804803826e-04, -+ 7.97908218864774886926e-04, -+ 9.24044761311549125993e-04, -+ 1.04955998956755358967e-03, -+ 1.17438267536891884947e-03, -+ 1.29844203880782817391e-03, -+ 1.42166778842579637730e-03, -+ 1.54399016099864027675e-03, -+ 1.66533996098952152137e-03, -+ 1.78564859964935114707e-03, -+ 1.90484813374091114212e-03, -+ 2.02287130386640369786e-03, -+ 2.13965157237518523517e-03, -+ 2.25512316083227538563e-03, -+ 2.36922108702373405281e-03, -+ 2.48188120148188241104e-03, -+ 2.59304022350648980672e-03, -+ 2.70263577666357253729e-03, -+ 2.81060642374125237153e-03, -+ 2.91689170114364185876e-03, -+ 3.02143215270252868399e-03, -+ 3.12416936288921476272e-03, -+ 3.22504598940713581648e-03, -+ 3.32400579514743541032e-03, -+ 3.42099367948939334788e-03, -+ 3.51595570892898222001e-03, -+ 3.60883914701814589171e-03, -+ 3.69959248359746136620e-03, -+ 3.78816546330745101967e-03, -+ 3.87450911336219023379e-03, -+ 3.95857577056929390430e-03, -+ 4.04031910758215120211e-03, -+ 4.11969415836998739677e-03, -+ 4.19665734289097897003e-03, -+ 4.27116649095604910408e-03, -+ 4.34318086526945621589e-03, -+ 4.41266118363398390095e-03, -+ 4.47956964030860743664e-03, -+ 4.54386992650717726205e-03, -+ 4.60552725002660520714e-03, -+ 4.66450835399471325227e-03, -+ 4.72078153472709621807e-03, -+ 4.77431665868354501020e-03, -+ 4.82508517851539756732e-03, -+ 4.87306014819507884311e-03, -+ 4.91821623721916140887e-03, -+ 4.96052974387923596711e-03, -+ 4.99997860759186524976e-03, -+ 5.03654242028247437629e-03, -+ 5.07020243681679735892e-03, -+ 5.10094158447498870201e-03, -+ 5.12874447146327485519e-03, -+ 5.15359739445947657999e-03, -+ 5.17548834518845573410e-03, -+ 5.19440701602455999486e-03, -+ 5.21034480461868027695e-03, -+ 5.22329481754779667568e-03, -+ 5.23325187298585500772e-03, -+ 5.24021250239507709739e-03, -+ 5.24417495123738995610e-03, -+ 5.24513917870653937486e-03, -+ 5.24310685648145778648e-03, -+ 5.23808136650251530281e-03, -+ 5.23006779777264278752e-03, -+ 5.21907294218578940437e-03, -+ 5.20510528938584581676e-03, -+ 5.18817502065979652137e-03, -+ 5.16829400186912500670e-03, -+ 5.14547577542429773745e-03, -+ 5.11973555130774103661e-03, -+ 5.09109019715092269570e-03, -+ 5.05955822737205133249e-03, -+ 5.02515979138124391917e-03, -+ 4.98791666086073268160e-03, -+ 4.94785221612767823346e-03, -+ 4.90499143158841868773e-03, -+ 4.85936086029322127783e-03, -+ 4.81098861760061516368e-03, -+ 4.75990436396146916753e-03, -+ 4.70613928683348472365e-03, -+ 4.64972608173691136918e-03, -+ 4.59069893246278216276e-03, -+ 4.52909349044612261070e-03, -+ 4.46494685331585636212e-03, -+ 4.39829754263475290049e-03, -+ 4.32918548084257250735e-03, -+ 4.25765196741618740656e-03, -+ 4.18373965426069652218e-03, -+ 4.10749252034667798605e-03, -+ 4.02895584560788132256e-03, -+ 3.94817618411542111539e-03, -+ 3.86520133654418484789e-03, -+ 3.78008032194739225507e-03, -+ 3.69286334885604366693e-03, -+ 3.60360178572117573551e-03, -+ 3.51234813071479813271e-03, -+ 3.41915598090793311503e-03, -+ 3.32408000084427699555e-03, -+ 3.22717589052724015269e-03, -+ 3.12850035283901645525e-03, -+ 3.02811106041162708680e-03, -+ 2.92606662196800764927e-03, -+ 2.82242654815364601290e-03, -+ 2.71725121687837328777e-03, -+ 2.61060183818851918036e-03, -+ 2.50254041868949728133e-03, -+ 2.39312972554039504053e-03, -+ 2.28243325004017514127e-03, -+ 2.17051517082786447205e-03, -+ 2.05744031671671037328e-03, -+ 1.94327412918531700070e-03, -+ 1.82808262454552442576e-03, -+ 1.71193235581180232437e-03, -+ 1.59489037429026681535e-03, -+ 1.47702419091290675264e-03, -+ 1.35840173733748205247e-03, -+ 1.23909132683596356558e-03, -+ 1.11916161499407847656e-03, -+ 9.98681560244074617572e-04, -+ 8.77720384254470167330e-04, -+ 7.56347532198058721681e-04, -+ 6.34632632921996054504e-04, -+ 5.12645459042746680714e-04, -+ 3.90455886987906247536e-04, -+ 2.68133857008314943106e-04, -+ 1.45749333184361831153e-04, -+ 2.33722634472747536666e-05, -+-9.89274603607503039181e-05, -+-2.21080042364225074413e-04, -+-3.43015822447986784560e-04, -+-4.64665315944092405156e-04, -+-5.85959253188382740186e-04, -+-7.06828618925680403524e-04, -+-8.27204691540118683922e-04, -+-9.47019082088787164143e-04, -+-1.06620377311637771697e-03, -+-1.18469115722925682696e-03, -+-1.30241407540605423285e-03, -+-1.41930585502448507011e-03, -+-1.53530034758192469001e-03, -+-1.65033196608840252578e-03, -+-1.76433572211173142659e-03, -+-1.87724726245334949150e-03, -+-1.98900290543319513067e-03, -+-2.09953967676512883930e-03, -+-2.20879534500175757350e-03, -+-2.31670845652815794724e-03, -+-2.42321837008570468985e-03, -+-2.52826529080659367574e-03, -+-2.63179030373909264226e-03, -+-2.73373540684600496026e-03, -+-2.83404354345699518308e-03, -+-2.93265863415691175817e-03, -+-3.02952560809236284833e-03, -+-3.12459043367923185522e-03, -+-3.21780014869336387223e-03, -+-3.30910288972877109082e-03, -+-3.39844792100587331576e-03, -+-3.48578566251492739242e-03, -+-3.57106771747796791425e-03, -+-3.65424689911476559614e-03, -+-3.73527725669808635320e-03, -+-3.81411410088312429617e-03, -+-3.89071402829827646050e-03, -+-3.96503494538289445737e-03, -+-4.03703609145932267727e-03, -+-4.10667806102655782996e-03, -+-4.17392282526347826316e-03, -+-4.23873375272956244564e-03, -+-4.30107562925237472268e-03, -+-4.36091467699083017162e-03, -+-4.41821857266369143885e-03, -+-4.47295646493412607514e-03, -+-4.52509899094063333669e-03, -+-4.57461829196504320139e-03, -+-4.62148802823035640547e-03, -+-4.66568339281999474449e-03, -+-4.70718112471093987764e-03, -+-4.74595952091446966065e-03, -+-4.78199844771800587628e-03, -+-4.81527935102211632201e-03, -+-4.84578526576791637770e-03, -+-4.87350082444968323026e-03, -+-4.89841226470876054538e-03, -+-4.92050743600499964486e-03, -+-4.93977580536274565870e-03, -+-4.95620846218847079662e-03, -+-4.96979812215835037303e-03, -+-4.98053913017405553570e-03, -+-4.98842746238571579237e-03, -+-4.99346072728172954425e-03, -+-4.99563816584549461736e-03, -+-4.99496065077936236831e-03, -+-4.99143068479745467825e-03, -+-4.98505239798852691629e-03, -+-4.97583154425139829319e-03, -+-4.96377549680547796446e-03, -+-4.94889324277973576688e-03, -+-4.93119537688388714231e-03, -+-4.91069409416598247342e-03, -+-4.88740318186142198853e-03, -+-4.86133801033847897516e-03, -+-4.83251552314631609847e-03, -+-4.80095422617195580206e-03, -+-4.76667417591256168535e-03, -+-4.72969696687120574191e-03, -+-4.69004571808321647775e-03, -+-4.64774505878175377138e-03, -+-4.60282111321146884114e-03, -+-4.55530148459956044787e-03, -+-4.50521523829377698589e-03, -+-4.45259288407801132742e-03, -+-4.39746635767579701487e-03, -+-4.33986900145311854660e-03, -+-4.27983554433203870759e-03, -+-4.21740208092733371431e-03, -+-4.15260604991831393240e-03, -+-4.08548621166932371396e-03, -+-4.01608262511158123353e-03, -+-3.94443662390054836098e-03, -+-3.87059079186303405321e-03, -+-3.79458893774812806160e-03, -+-3.71647606929711776455e-03, -+-3.63629836664845860345e-03, -+-3.55410315509214558630e-03, -+-3.46993887719018040405e-03, -+-3.38385506427993278805e-03, -+-3.29590230737648436782e-03, -+-3.20613222749113312843e-03, -+-3.11459744538398987032e-03, -+-3.02135155076756461295e-03, -+-2.92644907097984593655e-03, -+-2.82994543914506487339e-03, -+-2.73189696184072483912e-03, -+-2.63236078628936763860e-03, -+-2.53139486709509815843e-03, -+-2.42905793254300297890e-03, -+-2.32540945048183896743e-03, -+-2.22050959380982104382e-03, -+-2.11441920558280097714e-03, -+-2.00719976376547218355e-03, -+-1.89891334564696082597e-03, -+-1.78962259193952521845e-03, -+-1.67939067058208314070e-03, -+-1.56828124026987358701e-03, -+-1.45635841373061535042e-03, -+-1.34368672076823521266e-03, -+-1.23033107109642224179e-03, -+-1.11635671698205856534e-03, -+-1.00182921572098456581e-03, -+-8.86814391967279472273e-04, -+-7.71378299937657582568e-04, -+-6.55587185513229354222e-04, -+-5.39507448258485936346e-04, -+-4.23205603382631467824e-04, -+-3.06748243661661022710e-04, -+-1.90202001344411987527e-04, -+-7.36335100648440309687e-05, -+ 4.28906332185422347128e-05, -+ 1.59303906234412831922e-04, -+ 2.75539899338800254799e-04, -+ 3.91532353363562794085e-04, -+ 5.07215197350502681149e-04, -+ 6.22522586150107753653e-04, -+ 7.37388937863388033329e-04, -+ 8.51748971105957086540e-04, -+ 9.65537742072175879035e-04, -+ 1.07869068137969592591e-03, -+ 1.19114363067259008272e-03, -+ 1.30283287896230275983e-03, -+ 1.41369519868671613717e-03, -+ 1.52366788146634829677e-03, -+ 1.63268877353659261353e-03, -+ 1.74069631083787878384e-03, -+ 1.84762955374296743323e-03, -+ 1.95342822140135439005e-03, -+ 2.05803272568219793037e-03, -+ 2.16138420469669332441e-03, -+ 2.26342455588016133738e-03, -+ 2.36409646861654226466e-03, -+ 2.46334345638605676718e-03, -+ 2.56110988841841760721e-03, -+ 2.65734102083372766834e-03, -+ 2.75198302725402016780e-03, -+ 2.84498302886748277024e-03, -+ 2.93628912392977997961e-03, -+ 3.02585041668512657459e-03, -+ 3.11361704569121855099e-03, -+ 3.19954021153272608058e-03, -+ 3.28357220390771429100e-03, -+ 3.36566642807112174907e-03, -+ 3.44577743062223634807e-03, -+ 3.52386092462112724549e-03, -+ 3.59987381401977125581e-03, -+ 3.67377421739513865956e-03, -+ 3.74552149097084462886e-03, -+ 3.81507625091497340475e-03, -+ 3.88240039490136924424e-03, -+ 3.94745712292331966259e-03, -+ 4.01021095734782184045e-03, -+ 4.07062776219968818631e-03, -+ 4.12867476166478130500e-03, -+ 4.18432055780340594886e-03, -+ 4.23753514746243783312e-03, -+ 4.28828993837902447406e-03, -+ 4.33655776446637518384e-03, -+ 4.38231290027339768361e-03, -+ 4.42553107461083304608e-03, -+ 4.46618948333678180557e-03, -+ 4.50426680129448111373e-03, -+ 4.53974319339683820423e-03, -+ 4.57260032485135199665e-03, -+ 4.60282137052065234983e-03, -+ 4.63039102341378759620e-03, -+ 4.65529550230404237654e-03, -+ 4.67752255846963938685e-03, -+ 4.69706148155405248112e-03, -+ 4.71390310454339756668e-03, -+ 4.72803980785840502477e-03, -+ 4.73946552255972292089e-03, -+ 4.74817573266493424267e-03, -+ 4.75416747657694122031e-03, -+ 4.75743934762336718319e-03, -+ 4.75799149370748075683e-03, -+ 4.75582561607138833149e-03, -+ 4.75094496717288084647e-03, -+ 4.74335434767782487125e-03, -+ 4.73306010257048929979e-03, -+ 4.72007011638460489966e-03, -+ 4.70439380755864264283e-03, -+ 4.68604212191906475959e-03, -+ 4.66502752529606660309e-03, -+ 4.64136399527643843388e-03, -+ 4.61506701209918757806e-03, -+ 4.58615354869955273859e-03, -+ 4.55464205990770056726e-03, -+ 4.52055247080917176061e-03, -+ 4.48390616427393924603e-03, -+ 4.44472596766223859710e-03, -+ 4.40303613871486330955e-03, -+ 4.35886235063746938639e-03, -+ 4.31223167638676834618e-03, -+ 4.26317257216925812185e-03, -+ 4.21171486016196257307e-03, -+ 4.15788971046581433411e-03, -+ 4.10172962230226281072e-03, -+ 4.04326840446501793724e-03, -+ 3.98254115503794432068e-03, -+ 3.91958424039167124125e-03, -+ 3.85443527347131180763e-03, -+ 3.78713309138849164512e-03, -+ 3.71771773232995421388e-03, -+ 3.64623041179842725945e-03, -+ 3.57271349819778243767e-03, -+ 3.49721048777782827360e-03, -+ 3.41976597895377260397e-03, -+ 3.34042564601502072266e-03, -+ 3.25923621223874176306e-03, -+ 3.17624542242462160752e-03, -+ 3.09150201486607309476e-03, -+ 3.00505569277494284652e-03, -+ 2.91695709517621800527e-03, -+ 2.82725776728985633834e-03, -+ 2.73601013041636529841e-03, -+ 2.64326745134584257038e-03, -+ 2.54908381130463648420e-03, -+ 2.45351407446147209979e-03, -+ 2.35661385600897553202e-03, -+ 2.25843948984021103410e-03, -+ 2.15904799583798876969e-03, -+ 2.05849704679780722699e-03, -+ 1.95684493500119767798e-03, -+ 1.85415053846056882350e-03, -+ 1.75047328685429747983e-03, -+ 1.64587312717267382142e-03, -+ 1.54041048909200266152e-03, -+ 1.43414625010112694974e-03, -+ 1.32714170039615556723e-03, -+ 1.21945850756623999298e-03, -+ 1.11115868108982397341e-03, -+ 1.00230453666194673813e-03, -+ 8.92958660373076220512e-04, -+ 7.83183872760047513316e-04, -+ 6.73043192749742938061e-04, -+ 5.62599801516196619360e-04, -+ 4.51917006271797402298e-04, -+ 3.41058204013367112766e-04, -+ 2.30086845243956402514e-04, -+ 1.19066397690317975016e-04, -+ 8.06031003876342309552e-06, -+-1.02868024292534745090e-04, -+-2.13655303322282262481e-04, -+-3.24238352595229727994e-04, -+-4.34554161172920089696e-04, -+-5.44539917503692838356e-04, -+-6.54133045151543304589e-04, -+-7.63271238365370997651e-04, -+-8.71892497466585482749e-04, -+-9.79935164035776202357e-04, -+-1.08733795587835245164e-03, -+-1.19404000174937055881e-03, -+-1.29998087581786859156e-03, -+-1.40510063185121983863e-03, -+-1.50933983710020702684e-03, -+-1.61263960586564250761e-03, -+-1.71494163272752683097e-03, -+-1.81618822541869504202e-03, -+-1.91632233732264294253e-03, -+-2.01528759957979742429e-03, -+-2.11302835278164621163e-03, -+-2.20948967823741222391e-03, -+-2.30461742879315041599e-03, -+-2.39835825918845125734e-03, -+-2.49065965593134232975e-03, -+-2.58146996667703255632e-03, -+-2.67073842909245186619e-03, -+-2.75841519919107873438e-03, -+-2.84445137912224619431e-03, -+-2.92879904439931598031e-03, -+-3.01141127055178960126e-03, -+-3.09224215918633147174e-03, -+-3.17124686344243166339e-03, -+-3.24838161282851346778e-03, -+-3.32360373742473678635e-03, -+-3.39687169143964044424e-03, -+-3.46814507610627249454e-03, -+-3.53738466190720588292e-03, -+-3.60455241011424683262e-03, -+-3.66961149363298272039e-03, -+-3.73252631713888970155e-03, -+-3.79326253649527652539e-03, -+-3.85178707744242114497e-03, -+-3.90806815354677143659e-03, -+-3.96207528340193453065e-03, -+-4.01377930707108587782e-03, -+-4.06315240176249869997e-03, -+-4.11016809672954883115e-03, -+-4.15480128738748670514e-03, -+-4.19702824863931681781e-03, -+-4.23682664740382061708e-03, -+-4.27417555433919245378e-03, -+-4.30905545475612165168e-03, -+-4.34144825871471493756e-03, -+-4.37133731030028924863e-03, -+-4.39870739607276222544e-03, -+-4.42354475268612757494e-03, -+-4.44583707367407054284e-03, -+-4.46557351539804588125e-03, -+-4.48274470215558658998e-03, -+-4.49734273044633849070e-03, -+-4.50936117239380054866e-03, -+-4.51879507832192439665e-03, -+-4.52564097848520176248e-03, -+-4.52989688395227449447e-03, -+-4.53156228664297524439e-03, -+-4.53063815851947795238e-03, -+-4.52712694993263019272e-03, -+-4.52103258712507720396e-03, -+-4.51236046889318294373e-03, -+-4.50111746241027566029e-03, -+-4.48731189821427022685e-03, -+-4.47095356436308811326e-03, -+-4.45205369976202098431e-03, -+-4.43062498666702171690e-03, -+-4.40668154236938374585e-03, -+-4.38023891006674489373e-03, -+-4.35131404892644905319e-03, -+-4.31992532334727567106e-03, -+-4.28609249142686190431e-03, -+-4.24983669264115699465e-03, -+-4.21118043474420344213e-03, -+-4.17014757989600526322e-03, -+-4.12676333002717343063e-03, -+-4.08105421144885384399e-03, -+-4.03304805871769478376e-03, -+-3.98277399776586060048e-03, -+-3.93026242830538889012e-03, -+-3.87554500551830520202e-03, -+-3.81865462104316469652e-03, -+-3.75962538326934676142e-03, -+-3.69849259695105700083e-03, -+-3.63529274215302917322e-03, -+-3.57006345254048127261e-03, -+-3.50284349302629844855e-03, -+-3.43367273678861842368e-03, -+-3.36259214167245173294e-03, -+-3.28964372598887933724e-03, -+-3.21487054372729570695e-03, -+-3.13831665919360848840e-03, -+-3.06002712109050643147e-03, -+-2.98004793605501560813e-03, -+-2.89842604166773779029e-03, -+-2.81520927895077040931e-03, -+-2.73044636437046704669e-03, -+-2.64418686136011710577e-03, -+-2.55648115138037068314e-03, -+-2.46738040453385034864e-03, -+-2.37693654975105290658e-03, -+-2.28520224456495602700e-03, -+-2.19223084449187820971e-03, -+-2.09807637203635911904e-03, -+-2.00279348533807409136e-03, -+-1.90643744647894558715e-03, -+-1.80906408946890644336e-03, -+-1.71072978792818604712e-03, -+-1.61149142248648530144e-03, -+-1.51140634791550681169e-03, -+-1.41053236001619538946e-03, -+-1.30892766227735197690e-03, -+-1.20665083232744858345e-03, -+-1.10376078819640946992e-03, -+-1.00031675440937460608e-03, -+-8.96378227929317322395e-04, -+-7.92004943969952133684e-04, -+-6.87256841697829728294e-04, -+-5.82194029843374478810e-04, -+-4.76876752240620047432e-04, -+-3.71365353315354857280e-04, -+-2.65720243541443139953e-04, -+-1.60001864885065504330e-04, -+-5.42706562566359684624e-05, -+ 5.14129810098762333082e-05, -+ 1.56988717630401143676e-04, -+ 2.62396330778088919793e-04, -+ 3.67575738403138686013e-04, -+ 4.72467033447351674163e-04, -+ 5.77010517933939639720e-04, -+ 6.81146736911458490320e-04, -+ 7.84816512234211456633e-04, -+ 8.87960976159937634238e-04, -+ 9.90521604744005372892e-04, -+ 1.09244025101365264951e-03, -+ 1.19365917790164059384e-03, -+ 1.29412109092141174894e-03, -+ 1.39376917056518003293e-03, -+ 1.49254710440663968495e-03, -+ 1.59039911889015199951e-03, -+ 1.68727001078853872801e-03, -+ 1.78310517831170383361e-03, -+ 1.87785065184860474295e-03, -+ 1.97145312432514584547e-03, -+ 2.06385998116165444646e-03, -+ 2.15501932981150296637e-03, -+ 2.24488002886593339402e-03, -+ 2.33339171670872728634e-03, -+ 2.42050483970316981583e-03, -+ 2.50617067989698880798e-03, -+ 2.59034138222976727944e-03, -+ 2.67296998122616528970e-03, -+ 2.75401042716228762475e-03, -+ 2.83341761168887876915e-03, -+ 2.91114739289797088209e-03, -+ 2.98715661981875787653e-03, -+ 3.06140315632929442893e-03, -+ 3.13384590447068249811e-03, -+ 3.20444482715097822209e-03, -+ 3.27316097022614747175e-03, -+ 3.33995648394608485657e-03, -+ 3.40479464375383631194e-03, -+ 3.46763987042658736876e-03, -+ 3.52845774954753865424e-03, -+ 3.58721505029781922991e-03, -+ 3.64387974355847871905e-03, -+ 3.69842101931248078139e-03, -+ 3.75080930333746573671e-03, -+ 3.80101627318009003750e-03, -+ 3.84901487340377030863e-03, -+ 3.89477933010077409515e-03, -+ 3.93828516466203197577e-03, -+ 3.97950920679663710383e-03, -+ 4.01842960679405468427e-03, -+ 4.05502584702343085721e-03, -+ 4.08927875266308724772e-03, -+ 4.12117050165479448243e-03, -+ 4.15068463387839852591e-03, -+ 4.17780605954134933583e-03, -+ 4.20252106677934406803e-03, -+ 4.22481732846414353988e-03, -+ 4.24468390821542990859e-03, -+ 4.26211126561366546173e-03, -+ 4.27709126061177457440e-03, -+ 4.28961715714353680751e-03, -+ 4.29968362592737362443e-03, -+ 4.30728674646440722745e-03, -+ 4.31242400823038558866e-03, -+ 4.31509431106120045635e-03, -+ 4.31529796473259855127e-03, -+ 4.31303668773473300457e-03, -+ 4.30831360524300700093e-03, -+ 4.30113324628681858303e-03, -+ 4.29150154011852507513e-03, -+ 4.27942581178534283554e-03, -+ 4.26491477690706718290e-03, -+ 4.24797853566351822641e-03, -+ 4.22862856599543705111e-03, -+ 4.20687771602348218464e-03, -+ 4.18274019569020352044e-03, -+ 4.15623156763024730748e-03, -+ 4.12736873727475445106e-03, -+ 4.09616994219598982985e-03, -+ 4.06265474069904698046e-03, -+ 4.02684399966749852207e-03, -+ 3.98875988167053836808e-03, -+ 3.94842583133988254962e-03, -+ 3.90586656102404668894e-03, -+ 3.86110803572960138361e-03, -+ 3.81417745735749278216e-03, -+ 3.76510324824506480840e-03, -+ 3.71391503402302824294e-03, -+ 3.66064362579748142634e-03, -+ 3.60532100166869413568e-03, -+ 3.54798028759637515753e-03, -+ 3.48865573762383116702e-03, -+ 3.42738271347229261563e-03, -+ 3.36419766351780209421e-03, -+ 3.29913810116290494648e-03, -+ 3.23224258261611266038e-03, -+ 3.16355068409222362283e-03, -+ 3.09310297844691411973e-03, -+ 3.02094101125942446004e-03, -+ 2.94710727637745740354e-03, -+ 2.87164519093818793039e-03, -+ 2.79459906988119548971e-03, -+ 2.71601409996710457459e-03, -+ 2.63593631331708773413e-03, -+ 2.55441256048993380751e-03, -+ 2.47149048311133935976e-03, -+ 2.38721848607121494082e-03, -+ 2.30164570930673547527e-03, -+ 2.21482199918544885378e-03, -+ 2.12679787950668637911e-03, -+ 2.03762452213744876123e-03, -+ 1.94735371729998175613e-03, -+ 1.85603784352819439415e-03, -+ 1.76372983731039952200e-03, -+ 1.67048316243592642229e-03, -+ 1.57635177906330727939e-03, -+ 1.48139011252795978722e-03, -+ 1.38565302190747641209e-03, -+ 1.28919576836194387306e-03, -+ 1.19207398326919835826e-03, -+ 1.09434363617172251450e-03, -+ 9.96061002553666387932e-04, -+ 8.97282631468103723978e-04, -+ 7.98065313031665838489e-04, -+ 6.98466045805186700954e-04, -+ 5.98542004080726075879e-04, -+ 4.98350505091392156909e-04, -+ 3.97948976164492736543e-04, -+ 2.97394921836138706028e-04, -+ 1.96745890946085639616e-04, -+ 9.60594437324946328737e-05, -+-4.60688105713253110850e-06, -+-1.05195599015863548308e-04, -+-2.05649312873547269803e-04, -+-3.05910745218120614427e-04, -+-4.05922771124209050102e-04, -+-5.05628450670332911694e-04, -+-6.04971061326233742333e-04, -+-7.03894130191895397823e-04, -+-8.02341466069983314836e-04, -+-9.00257191353478103575e-04, -+-9.97585773710441469850e-04, -+-1.09427205754784526159e-03, -+-1.19026129523734734011e-03, -+-1.28549917808361388767e-03, -+-1.37993186702002005456e-03, -+-1.47350602301274868564e-03, -+-1.56616883715618676436e-03, -+-1.65786806044407471726e-03, -+-1.74855203319811505248e-03, -+-1.83816971413744510017e-03, -+-1.92667070907424605244e-03, -+-2.01400529921775661019e-03, -+-2.10012446907152346490e-03, -+-2.18497993390813667614e-03, -+-2.26852416680606251351e-03, -+-2.35071042523344675770e-03, -+-2.43149277716405484012e-03, -+-2.51082612671079579217e-03, -+-2.58866623926247820323e-03, -+-2.66496976610981501504e-03, -+-2.73969426854743253880e-03, -+-2.81279824143723829188e-03, -+-2.88424113622183812475e-03, -+-2.95398338337400341927e-03, -+-3.02198641426984970434e-03, -+-3.08821268247472897547e-03, -+-3.15262568442887820136e-03, -+-3.21518997952162247436e-03, -+-3.27587120954407487808e-03, -+-3.33463611750868180184e-03, -+-3.39145256582575700330e-03, -+-3.44628955382705274429e-03, -+-3.49911723462676847382e-03, -+-3.54990693131099601179e-03, -+-3.59863115244673462817e-03, -+-3.64526360690210944615e-03, -+-3.68977921797001727142e-03, -+-3.73215413678737884667e-03, -+-3.77236575504307771953e-03, -+-3.81039271696794737063e-03, -+-3.84621493059991411204e-03, -+-3.87981357831906903399e-03, -+-3.91117112664715865095e-03, -+-3.94027133530578613924e-03, -+-3.96709926552936235911e-03, -+-3.99164128762850064364e-03, -+-4.01388508779965472173e-03, -+-4.03381967417829664230e-03, -+-4.05143538213234219447e-03, -+-4.06672387879341342559e-03, -+-4.07967816682406215351e-03, -+-4.09029258741918071846e-03, -+-4.09856282254066582593e-03, -+-4.10448589638437531107e-03, -+-4.10806017607942119269e-03, -+-4.10928537161966977997e-03, -+-4.10816253502826328470e-03, -+-4.10469405875612397550e-03, -+-4.09888367331595702275e-03, -+-4.09073644415366196453e-03, -+-4.08025876775947385355e-03, -+-4.06745836702175275756e-03, -+-4.05234428582641227623e-03, -+-4.03492688290585550803e-03, -+-4.01521782494141353526e-03, -+-3.99323007892370650251e-03, -+-3.96897790377597620148e-03, -+-3.94247684124562208785e-03, -+-3.91374370606971909436e-03, -+-3.88279657542071584067e-03, -+-3.84965477763883840226e-03, -+-3.81433888025815110920e-03, -+-3.77687067733369942479e-03, -+-3.73727317607745312261e-03, -+-3.69557058281119732435e-03, -+-3.65178828824497432592e-03, -+-3.60595285208962579651e-03, -+-3.55809198701380119054e-03, -+-3.50823454195329457322e-03, -+-3.45641048478445914172e-03, -+-3.40265088437114587849e-03, -+-3.34698789199610203388e-03, -+-3.28945472218769140865e-03, -+-3.23008563295407733276e-03, -+-3.16891590543550479703e-03, -+-3.10598182298758417746e-03, -+-3.04132064970752489380e-03, -+-2.97497060841662606598e-03, -+-2.90697085811037359698e-03, -+-2.83736147089205630045e-03, -+-2.76618340840093044491e-03, -+-2.69347849775016792359e-03, -+-2.61928940698839384654e-03, -+-2.54365962009905433386e-03, -+-2.46663341155241517058e-03, -+-2.38825582042492129409e-03, -+-2.30857262410112847040e-03, -+-2.22763031157348617012e-03, -+-2.14547605635553037887e-03, -+-2.06215768902437597554e-03, -+-1.97772366940784189923e-03, -+-1.89222305843385276043e-03, -+-1.80570548965651076455e-03, -+-1.71822114047665615993e-03, -+-1.62982070307368252966e-03, -+-1.54055535506404249653e-03, -+-1.45047672990482020075e-03, -+-1.35963688705958486193e-03, -+-1.26808828194214899543e-03, -+-1.17588373565714085327e-03, -+-1.08307640455412444898e-03, -+-9.89719749612947034476e-04, -+-8.95867505677916593256e-04, -+-8.01573650558492470548e-04, -+-7.06892374014246962534e-04, -+-6.11878046641902415860e-04, -+-5.16585188682274517973e-04, -+-4.21068438765152331434e-04, -+-3.25382522609281570492e-04, -+-2.29582221697126570396e-04, -+-1.33722341940000448565e-04, -+-3.78576823531001234436e-05, -+ 5.79569962416860487149e-05, -+ 1.53667002468926312949e-04, -+ 2.49217745588539837595e-04, -+ 3.44554766605055051796e-04, -+ 4.39623769277135254159e-04, -+ 5.34370651012117960608e-04, -+ 6.28741533626295430459e-04, -+ 7.22682793954151111819e-04, -+ 8.16141094289066942359e-04, -+ 9.09063412638226858026e-04, -+ 1.00139707277458692852e-03, -+ 1.09308977406887886975e-03, -+ 1.18408962108478813154e-03, -+ 1.27434515292056300961e-03, -+ 1.36380537228036891051e-03, -+ 1.45241977425964634632e-03, -+ 1.54013837482673316033e-03, -+ 1.62691173898619058195e-03, -+ 1.71269100860800766242e-03, -+ 1.79742792990551444876e-03, -+ 1.88107488054797562099e-03, -+ 1.96358489639263892462e-03, -+ 2.04491169781978020942e-03, -+ 2.12500971565807118477e-03, -+ 2.20383411668426208024e-03, -+ 2.28134082868343369618e-03, -+ 2.35748656505591286728e-03, -+ 2.43222884895690980023e-03, -+ 2.50552603695564177905e-03, -+ 2.57733734220062273013e-03, -+ 2.64762285707839271562e-03, -+ 2.71634357535300218975e-03, -+ 2.78346141377399823244e-03, -+ 2.84893923314137337971e-03, -+ 2.91274085881481313576e-03, -+ 2.97483110065697737429e-03, -+ 3.03517577239990551941e-03, -+ 3.09374171042274635074e-03, -+ 3.15049679193164094970e-03, -+ 3.20540995253164491541e-03, -+ 3.25845120318029885659e-03, -+ 3.30959164651485658951e-03, -+ 3.35880349254337635945e-03, -+ 3.40606007369155918199e-03, -+ 3.45133585919722533919e-03, -+ 3.49460646884427843240e-03, -+ 3.53584868602997270254e-03, -+ 3.57504047015665300802e-03, -+ 3.61216096834317094977e-03, -+ 3.64719052644881403663e-03, -+ 3.68011069940423060295e-03, -+ 3.71090426084389433947e-03, -+ 3.73955521203543422501e-03, -+ 3.76604879010044787946e-03, -+ 3.79037147552388660465e-03, -+ 3.81251099894702218107e-03, -+ 3.83245634724140764663e-03, -+ 3.85019776886061934965e-03, -+ 3.86572677846735036217e-03, -+ 3.87903616083361702654e-03, -+ 3.89011997401263057497e-03, -+ 3.89897355178084716390e-03, -+ 3.90559350534943564709e-03, -+ 3.90997772434472940645e-03, -+ 3.91212537705771124658e-03, -+ 3.91203690996272997887e-03, -+ 3.90971404650655458141e-03, -+ 3.90515978516874822171e-03, -+ 3.89837839679519444422e-03, -+ 3.88937542120674139765e-03, -+ 3.87815766308545256322e-03, -+ 3.86473318714143513133e-03, -+ 3.84911131256343097898e-03, -+ 3.83130260675695194506e-03, -+ 3.81131887837403860592e-03, -+ 3.78917316963920574116e-03, -+ 3.76487974797630508064e-03, -+ 3.73845409694197614373e-03, -+ 3.70991290647096740377e-03, -+ 3.67927406243961268098e-03, -+ 3.64655663555414144908e-03, -+ 3.61178086957013007655e-03, -+ 3.57496816885076278136e-03, -+ 3.53614108527169294233e-03, -+ 3.49532330447974940585e-03, -+ 3.45253963151448796734e-03, -+ 3.40781597580096327210e-03, -+ 3.36117933552288828195e-03, -+ 3.31265778138546554757e-03, -+ 3.26228043977774525078e-03, -+ 3.21007747534444651261e-03, -+ 3.15608007297777824404e-03, -+ 3.10032041923983094425e-03, -+ 3.04283168322677004605e-03, -+ 2.98364799688597944274e-03, -+ 2.92280443479772233245e-03, -+ 2.86033699343400974954e-03, -+ 2.79628256990564587336e-03, -+ 2.73067894021140553096e-03, -+ 2.66356473700054630430e-03, -+ 2.59497942686348799513e-03, -+ 2.52496328716229770719e-03, -+ 2.45355738241618799925e-03, -+ 2.38080354025428783324e-03, -+ 2.30674432695083695896e-03, -+ 2.23142302255665983882e-03, -+ 2.15488359564151290768e-03, -+ 2.07717067766201215345e-03, -+ 1.99832953697007134966e-03, -+ 1.91840605247694541945e-03, -+ 1.83744668698823622119e-03, -+ 1.75549846022528331473e-03, -+ 1.67260892154870227308e-03, -+ 1.58882612239931203697e-03, -+ 1.50419858847373826526e-03, -+ 1.41877529164945908116e-03, -+ 1.33260562167547579916e-03, -+ 1.24573935764636829771e-03, -+ 1.15822663927488351057e-03, -+ 1.07011793797963318704e-03, -+ 9.81464027805968499546e-04, -+ 8.92315956194724064533e-04, -+ 8.02725014617197869804e-04, -+ 7.12742709092594579033e-04, -+ 6.22420730605006554577e-04, -+ 5.31810925436872606979e-04, -+ 4.40965265435949780974e-04, -+ 3.49935818232817224746e-04, -+ 2.58774717425973744146e-04, -+ 1.67534132751585059917e-04, -+ 7.62662402549235993827e-05, -+-1.49768075193361299620e-05, -+-1.06142911301720894524e-04, -+-1.97180054818197052647e-04, -+-2.88036334442900109586e-04, -+-3.78659988762671830508e-04, -+-4.68999428038859239934e-04, -+-5.59003263548750505343e-04, -+-6.48620336790735633678e-04, -+-7.37799748534993023869e-04, -+-8.26490887705368343190e-04, -+-9.14643460074474100654e-04, -+-1.00220751675647416767e-03, -+-1.08913348248064457101e-03, -+-1.17537218363183721542e-03, -+-1.26087487603843595614e-03, -+-1.34559327249569936173e-03, -+-1.42947957000680455318e-03, -+-1.51248647672699333688e-03, -+-1.59456723859538701364e-03, -+-1.67567566564024317960e-03, -+-1.75576615794077609337e-03, -+-1.83479373123439024051e-03, -+-1.91271404215155051663e-03, -+-1.98948341306622901448e-03, -+-2.06505885654718109729e-03, -+-2.13939809939708890443e-03, -+-2.21245960626475536570e-03, -+-2.28420260281900038002e-03, -+-2.35458709846996828985e-03, -+-2.42357390862588594968e-03, -+-2.49112467647214820554e-03, -+-2.55720189426249895279e-03, -+-2.62176892410749236631e-03, -+-2.68479001825172808662e-03, -+-2.74623033882684950205e-03, -+-2.80605597707006462066e-03, -+-2.86423397199746590513e-03, -+-2.92073232852189295164e-03, -+-2.97552003500548174764e-03, -+-3.02856708023718085299e-03, -+-3.07984446982606822549e-03, -+-3.12932424200147371596e-03, -+-3.17697948281127698356e-03, -+-3.22278434071057110627e-03, -+-3.26671404053182311278e-03, -+-3.30874489683027862494e-03, -+-3.34885432659656149396e-03, -+-3.38702086132979581640e-03, -+-3.42322415846545938939e-03, -+-3.45744501215092866347e-03, -+-3.48966536336403100604e-03, -+-3.51986830936835840347e-03, -+-3.54803811250142776476e-03, -+-3.57416020829039995585e-03, -+-3.59822121289160232194e-03, -+-3.62020892984994159536e-03, -+-3.64011235617500532313e-03, -+-3.65792168773078438943e-03, -+-3.67362832393644143589e-03, -+-3.68722487177608991560e-03, -+-3.69870514911562918089e-03, -+-3.70806418732541956396e-03, -+-3.71529823320771324796e-03, -+-3.72040475022829665933e-03, -+-3.72338241905218391911e-03, -+-3.72423113738358209715e-03, -+-3.72295201911065475747e-03, -+-3.71954739275624172296e-03, -+-3.71402079923576107501e-03, -+-3.70637698892428832029e-03, -+-3.69662191803482587105e-03, -+-3.68476274431051497790e-03, -+-3.67080782203360296914e-03, -+-3.65476669635465692756e-03, -+-3.63665009694570488807e-03, -+-3.61646993098150822468e-03, -+-3.59423927545334974051e-03, -+-3.56997236882036642416e-03, -+-3.54368460200365923210e-03, -+-3.51539250872874575737e-03, -+-3.48511375522234101432e-03, -+-3.45286712927017321387e-03, -+-3.41867252864195810338e-03, -+-3.38255094889135894329e-03, -+-3.34452447053745815023e-03, -+-3.30461624563659203332e-03, -+-3.26285048375162325951e-03, -+-3.21925243732817121037e-03, -+-3.17384838648557959795e-03, -+-3.12666562323245288482e-03, -+-3.07773243511595077232e-03, -+-3.02707808831462633209e-03, -+-2.97473281018491211153e-03, -+-2.92072777127162135427e-03, -+-2.86509506679312160940e-03, -+-2.80786769761221183597e-03, -+-2.74907955070388763247e-03, -+-2.68876537913161550372e-03, -+-2.62696078154390838186e-03, -+-2.56370218120280770127e-03, -+-2.49902680455817757105e-03, -+-2.43297265937776879124e-03, -+-2.36557851244843493979e-03, -+-2.29688386686014139187e-03, -+-2.22692893888647245465e-03, -+-2.15575463447475546355e-03, -+-2.08340252536062418495e-03, -+-2.00991482481939400667e-03, -+-1.93533436306957584878e-03, -+-1.85970456234225522789e-03, -+-1.78306941163151812420e-03, -+-1.70547344113878836074e-03, -+-1.62696169642893568967e-03, -+-1.54757971231007083503e-03, -+-1.46737348645403320284e-03, -+-1.38638945277216006635e-03, -+-1.30467445456199375615e-03, -+-1.22227571743970366350e-03, -+-1.13924082207588254177e-03, -+-1.05561767674710021286e-03, -+-9.71454489722374482305e-04, -+-8.86799741498446592036e-04, -+-8.01702156900612784851e-04, -+-7.16210677064451489704e-04, -+-6.30374431316047391209e-04, -+-5.44242708964845500752e-04, -+-4.57864931026830763918e-04, -+-3.71290621893513930751e-04, -+-2.84569380963795102567e-04, -+-1.97750854252763154373e-04, -+-1.10884705997269506742e-04, -+-2.40205902709113495357e-05, -+ 6.27918773732192452876e-05, -+ 1.49503148216553689897e-04, -+ 2.36063768629587555480e-04, -+ 3.22424408250847381943e-04, -+ 4.08535888074242200738e-04, -+ 4.94349208428819172911e-04, -+ 5.79815576835024100270e-04, -+ 6.64886435721643610786e-04, -+ 7.49513489987693693958e-04, -+ 8.33648734393532949913e-04, -+ 9.17244480766279870337e-04, -+ 1.00025338500262374157e-03, -+ 1.08262847385585773974e-03, -+ 1.16432317148991437694e-03, -+ 1.24529132578744816673e-03, -+ 1.32548723439501444157e-03, -+ 1.40486567049264701387e-03, -+ 1.48338190827135567480e-03, -+ 1.56099174810615912330e-03, -+ 1.63765154140913405528e-03, -+ 1.71331821514903869137e-03, -+ 1.78794929602366808354e-03, -+ 1.86150293427143464359e-03, -+ 1.93393792710878204520e-03, -+ 2.00521374178037978947e-03, -+ 2.07529053820916823889e-03, -+ 2.14412919123365373897e-03, -+ 2.21169131241997444365e-03, -+ 2.27793927143706215546e-03, -+ 2.34283621698181060769e-03, -+ 2.40634609724435857836e-03, -+ 2.46843367990040021484e-03, -+ 2.52906457162119062410e-03, -+ 2.58820523708867778964e-03, -+ 2.64582301750689681194e-03, -+ 2.70188614859793313494e-03, -+ 2.75636377807397716516e-03, -+ 2.80922598257490408261e-03, -+ 2.86044378406247841104e-03, -+ 2.90998916566214413729e-03, -+ 2.95783508694383865181e-03, -+ 3.00395549863343705108e-03, -+ 3.04832535674689130908e-03, -+ 3.09092063613944411163e-03, -+ 3.13171834346257340134e-03, -+ 3.17069652952171746399e-03, -+ 3.20783430102820335192e-03, -+ 3.24311183173923859094e-03, -+ 3.27651037297958976080e-03, -+ 3.30801226353996018562e-03, -+ 3.33760093894684218077e-03, -+ 3.36526094009848182609e-03, -+ 3.39097792126302451446e-03, -+ 3.41473865743472130771e-03, -+ 3.43653105104400240569e-03, -+ 3.45634413801872283564e-03, -+ 3.47416809319318680913e-03, -+ 3.48999423506242021850e-03, -+ 3.50381502987956103268e-03, -+ 3.51562409509444421737e-03, -+ 3.52541620213190926708e-03, -+ 3.53318727850884806152e-03, -+ 3.53893440928911917967e-03, -+ 3.54265583787610402466e-03, -+ 3.54435096614294726028e-03, -+ 3.54402035390087273917e-03, -+ 3.54166571770637159458e-03, -+ 3.53728992900847680203e-03, -+ 3.53089701163765857378e-03, -+ 3.52249213863829475218e-03, -+ 3.51208162844697177607e-03, -+ 3.49967294041929766896e-03, -+ 3.48527466970839335317e-03, -+ 3.46889654149831836577e-03, -+ 3.45054940459623565863e-03, -+ 3.43024522438756772347e-03, -+ 3.40799707515864217997e-03, -+ 3.38381913179134578146e-03, -+ 3.35772666083566971931e-03, -+ 3.32973601096507977951e-03, -+ 3.29986460282096893265e-03, -+ 3.26813091825231636506e-03, -+ 3.23455448895733962272e-03, -+ 3.19915588453362383092e-03, -+ 3.16195669994496055336e-03, -+ 3.12297954241108925363e-03, -+ 3.08224801772958309845e-03, -+ 3.03978671603739392451e-03, -+ 2.99562119702084100892e-03, -+ 2.94977797458266955549e-03, -+ 2.90228450097598702356e-03, -+ 2.85316915041365507313e-03, -+ 2.80246120216355544194e-03, -+ 2.75019082313949451285e-03, -+ 2.69638904999837305393e-03, -+ 2.64108777075355415781e-03, -+ 2.58431970591592842859e-03, -+ 2.52611838917400372689e-03, -+ 2.46651814762340482884e-03, -+ 2.40555408155839313758e-03, -+ 2.34326204383680314694e-03, -+ 2.27967861883065755005e-03, -+ 2.21484110097475844769e-03, -+ 2.14878747292579150296e-03, -+ 2.08155638334478173060e-03, -+ 2.01318712431581723840e-03, -+ 1.94371960841423544429e-03, -+ 1.87319434543773495790e-03, -+ 1.80165241881343461162e-03, -+ 1.72913546169589605814e-03, -+ 1.65568563276817190023e-03, -+ 1.58134559176179804313e-03, -+ 1.50615847470803379538e-03, -+ 1.43016786893666826216e-03, -+ 1.35341778783496088576e-03, -+ 1.27595264538327276757e-03, -+ 1.19781723048013573688e-03, -+ 1.11905668107298707052e-03, -+ 1.03971645810893640986e-03, -+ 9.59842319320685158357e-04, -+ 8.79480292862680045757e-04, -+ 7.98676650812700722817e-04, -+ 7.17477882554103476610e-04, -+ 6.35930668054020351715e-04, -+ 5.54081851052870642121e-04, -+ 4.71978412180657619888e-04, -+ 3.89667442014872736876e-04, -+ 3.07196114096923401319e-04, -+ 2.24611657920471623987e-04, -+ 1.41961331909191799819e-04, -+ 5.92923963973368171269e-05, -+-2.33479133692958273222e-05, -+-1.05912414198647058736e-04, -+-1.88354001866488713528e-04, -+-2.70625677966048025676e-04, -+-3.52680576676401690700e-04, -+-4.34471991434995103831e-04, -+-5.15953401499023248805e-04, -+-5.97078498380584432939e-04, -+-6.77801212140594598610e-04, -+-7.58075737526550121580e-04, -+-8.37856559939326346609e-04, -+-9.17098481214296688997e-04, -+-9.95756645202195691743e-04, -+-1.07378656313515804741e-03, -+-1.15114413876416595180e-03, -+-1.22778569325242541826e-03, -+-1.30366798981191894975e-03, -+-1.37874825806924973352e-03, -+-1.45298421814578576985e-03, -+-1.52633410443975465511e-03, -+-1.59875668909689456869e-03, -+-1.67021130515527735372e-03, -+-1.74065786935308415041e-03, -+-1.81005690458521380053e-03, -+-1.87836956199671648374e-03, -+-1.94555764270060572822e-03, -+-2.01158361910792719829e-03, -+-2.07641065585818058656e-03, -+-2.14000263033844919519e-03, -+-2.20232415277983682028e-03, -+-2.26334058592000822788e-03, -+-2.32301806422092246146e-03, -+-2.38132351263152302820e-03, -+-2.43822466488363524817e-03, -+-2.49369008131333563458e-03, -+-2.54768916619557087705e-03, -+-2.60019218458394001450e-03, -+-2.65117027864584945199e-03, -+-2.70059548348453026811e-03, -+-2.74844074243833736901e-03, -+-2.79467992185021508675e-03, -+-2.83928782529839322801e-03, -+-2.88224020728095487592e-03, -+-2.92351378634650351657e-03, -+-2.96308625766492647960e-03, -+-3.00093630502965393395e-03, -+-3.03704361228680124254e-03, -+-3.07138887418407363628e-03, -+-3.10395380663392372531e-03, -+-3.13472115638562150164e-03, -+-3.16367471010103352980e-03, -+-3.19079930282948481812e-03, -+-3.21608082587721087059e-03, -+-3.23950623406747337252e-03, -+-3.26106355238757342555e-03, -+-3.28074188201942212179e-03, -+-3.29853140575076496377e-03, -+-3.31442339276444199875e-03, -+-3.32841020280317178778e-03, -+-3.34048528970836431165e-03, -+-3.35064320433112964454e-03, -+-3.35887959681426418596e-03, -+-3.36519121824467148246e-03, -+-3.36957592167543267675e-03, -+-3.37203266251754653349e-03, -+-3.37256149830169856332e-03, -+-3.37116358781047254292e-03, -+-3.36784118958214327699e-03, -+-3.36259765978729266434e-03, -+-3.35543744947994172431e-03, -+-3.34636610122527418040e-03, -+-3.33539024510636330015e-03, -+-3.32251759411259645072e-03, -+-3.30775693891291596924e-03, -+-3.29111814201739957125e-03, -+-3.27261213133083796178e-03, -+-3.25225089310266250384e-03, -+-3.23004746427743008250e-03, -+-3.20601592425105112044e-03, -+-3.18017138603743105413e-03, -+-3.15252998685158682818e-03, -+-3.12310887811450286003e-03, -+-3.09192621488647281444e-03, -+-3.05900114473474978721e-03, -+-3.02435379604281111970e-03, -+-2.98800526576807482307e-03, -+-2.94997760665555814816e-03, -+-2.91029381391519391745e-03, -+-2.86897781137080603100e-03, -+-2.82605443708909163589e-03, -+-2.78154942849715867623e-03, -+-2.73548940699755568570e-03, -+-2.68790186208995533074e-03, -+-2.63881513500899191754e-03, -+-2.58825840188760128782e-03, -+-2.53626165645667129775e-03, -+-2.48285569229048054193e-03, -+-2.42807208460824822810e-03, -+-2.37194317164358134745e-03, -+-2.31450203559181158161e-03, -+-2.25578248314654231793e-03, -+-2.19581902563767547218e-03, -+-2.13464685878131952071e-03, -+-2.07230184205435888356e-03, -+-2.00882047770541138920e-03, -+-1.94423988941450141647e-03, -+-1.87859780061385762441e-03, -+-1.81193251248255946667e-03, -+-1.74428288162779420063e-03, -+-1.67568829746571096480e-03, -+-1.60618865931505343768e-03, -+-1.53582435321696704651e-03, -+-1.46463622849387254017e-03, -+-1.39266557406221786267e-03, -+-1.31995409451166924308e-03, -+-1.24654388596452171158e-03, -+-1.17247741173051502755e-03, -+-1.09779747777003140220e-03, -+-1.02254720797977159512e-03, -+-9.46770019316456627398e-04, -+-8.70509596771090981941e-04, -+-7.93809868209522859206e-04, -+-7.16714979093283142790e-04, -+-6.39269267095267379464e-04, -+-5.61517236624901622949e-04, -+-4.83503533277372383840e-04, -+-4.05272918221601325187e-04, -+-3.26870242541634718064e-04, -+-2.48340421546139789206e-04, -+-1.69728409060813500292e-04, -+-9.10791717177389864102e-05, -+-1.24376632583528602298e-05, -+ 6.61512011385834202077e-05, -+ 1.44642570486082041627e-04, -+ 2.22991683562456983764e-04, -+ 3.01153894413956873654e-04, -+ 3.79084697772648165047e-04, -+ 4.56739754373683643027e-04, -+ 5.34074916159440896482e-04, -+ 6.11046251354811493887e-04, -+ 6.87610069400060091790e-04, -+ 7.63722945726494719700e-04, -+ 8.39341746362165606193e-04, -+ 9.14423652352394037562e-04, -+ 9.88926183981333204245e-04, -+ 1.06280722478213824657e-03, -+ 1.13602504532090125416e-03, -+ 1.20853832674150526647e-03, -+ 1.28030618405801659317e-03, -+ 1.35128818918151915977e-03, -+ 1.42144439366839823308e-03, -+ 1.49073535117733935521e-03, -+ 1.55912213962240372468e-03, -+ 1.62656638300974010561e-03, -+ 1.69303027294565532589e-03, -+ 1.75847658980445606218e-03, -+ 1.82286872354303674040e-03, -+ 1.88617069415219075317e-03, -+ 1.94834717173209578771e-03, -+ 2.00936349618086648045e-03, -+ 2.06918569648611430298e-03, -+ 2.12778050960779879092e-03, -+ 2.18511539894190561298e-03, -+ 2.24115857235570323583e-03, -+ 2.29587899978361603334e-03, -+ 2.34924643037442331187e-03, -+ 2.40123140918023199666e-03, -+ 2.45180529337806233856e-03, -+ 2.50094026801512278949e-03, -+ 2.54860936126915377242e-03, -+ 2.59478645921546943742e-03, -+ 2.63944632009264395014e-03, -+ 2.68256458805902911827e-03, -+ 2.72411780643292029958e-03, -+ 2.76408343040847976832e-03, -+ 2.80243983924151687792e-03, -+ 2.83916634789766180597e-03, -+ 2.87424321815756868281e-03, -+ 2.90765166917223739917e-03, -+ 2.93937388746383842716e-03, -+ 2.96939303636573146555e-03, -+ 2.99769326489773184699e-03, -+ 3.02425971607121193627e-03, -+ 3.04907853462010837095e-03, -+ 3.07213687415372471712e-03, -+ 3.09342290372770093235e-03, -+ 3.11292581382988705480e-03, -+ 3.13063582177805889775e-03, -+ 3.14654417652693004295e-03, -+ 3.16064316288211652126e-03, -+ 3.17292610511905577922e-03, -+ 3.18338737000537549265e-03, -+ 3.19202236922536521438e-03, -+ 3.19882756120557767629e-03, -+ 3.20380045234103065510e-03, -+ 3.20693959762191095619e-03, -+ 3.20824460066048821466e-03, -+ 3.20771611311912148781e-03, -+ 3.20535583353980316201e-03, -+ 3.20116650557659455922e-03, -+ 3.19515191563226816363e-03, -+ 3.18731688990105815895e-03, -+ 3.17766729081954413250e-03, -+ 3.16621001292834072099e-03, -+ 3.15295297814715538495e-03, -+ 3.13790513046660092533e-03, -+ 3.12107643006004570677e-03, -+ 3.10247784681945935892e-03, -+ 3.08212135331927200924e-03, -+ 3.06001991721279766046e-03, -+ 3.03618749306580832173e-03, -+ 3.01063901363274712478e-03, -+ 2.98339038058057295921e-03, -+ 2.95445845466603060347e-03, -+ 2.92386104537267895939e-03, -+ 2.89161690001368777356e-03, -+ 2.85774569230700953987e-03, -+ 2.82226801043036334277e-03, -+ 2.78520534456247253682e-03, -+ 2.74658007391870816194e-03, -+ 2.70641545328861908917e-03, -+ 2.66473559908350773537e-03, -+ 2.62156547490237238143e-03, -+ 2.57693087662487496647e-03, -+ 2.53085841704014631939e-03, -+ 2.48337551002058860156e-03, -+ 2.43451035425012096355e-03, -+ 2.38429191651639985419e-03, -+ 2.33274991457697866704e-03, -+ 2.27991479960949847833e-03, -+ 2.22581773825620892956e-03, -+ 2.17049059427346612006e-03, -+ 2.11396590979692159534e-03, -+ 2.05627688623344091062e-03, -+ 1.99745736479101619609e-03, -+ 1.93754180665763118922e-03, -+ 1.87656527284175219002e-03, -+ 1.81456340368482097088e-03, -+ 1.75157239805861998823e-03, -+ 1.68762899225976484990e-03, -+ 1.62277043861255095177e-03, -+ 1.55703448379367948885e-03, -+ 1.49045934689147926804e-03, -+ 1.42308369721128166394e-03, -+ 1.35494663184088722126e-03, -+ 1.28608765298868091623e-03, -+ 1.21654664510756371255e-03, -+ 1.14636385181799576628e-03, -+ 1.07557985264340023011e-03, -+ 1.00423553957145047719e-03, -+ 9.32372093454700246948e-04, -+ 8.60030960264205842671e-04, -+ 7.87253827209889473632e-04, -+ 7.14082598740849215993e-04, -+ 6.40559372440761354631e-04, -+ 5.66726414830463851718e-04, -+ 4.92626137092837322433e-04, -+ 4.18301070733919581456e-04, -+ 3.43793843193061820010e-04, -+ 2.69147153417339558834e-04, -+ 1.94403747414189487621e-04, -+ 1.19606393795037383994e-04, -+ 4.47978593251173554416e-05, -+-2.99791155070713611101e-05, -+-1.04681840886644762128e-04, -+-1.79267702021634553217e-04, -+-2.53694183430834704039e-04, -+-3.27918893156363931707e-04, -+-4.01899586887169662890e-04, -+-4.75594191979749616409e-04, -+-5.48960831362461866741e-04, -+-6.21957847309750270874e-04, -+-6.94543825073334680428e-04, -+-7.66677616355743358524e-04, -+-8.38318362614142603174e-04, -+-9.09425518181231052305e-04, -+-9.79958873188954042791e-04, -+-1.04987857628321295568e-03, -+-1.11914515711671069299e-03, -+-1.18771954860611567151e-03, -+-1.25556310894265384798e-03, -+-1.32263764334250685968e-03, -+-1.38890542552527339500e-03, -+-1.45432921890835268122e-03, -+-1.51887229750536853490e-03, -+-1.58249846651689705240e-03, -+-1.64517208260199325476e-03, -+-1.70685807381915056156e-03, -+-1.76752195922558370811e-03, -+-1.82712986812380161379e-03, -+-1.88564855894518047276e-03, -+-1.94304543775902804383e-03, -+-1.99928857639786617534e-03, -+-2.05434673018880555040e-03, -+-2.10818935528026517312e-03, -+-2.16078662555535365442e-03, -+-2.21210944912246043961e-03, -+-2.26212948437317816139e-03, -+-2.31081915559989232653e-03, -+-2.35815166816356804741e-03, -+-2.40410102320373414084e-03, -+-2.44864203188258338501e-03, -+-2.49175032915539568928e-03, -+-2.53340238705979841141e-03, -+-2.57357552751657147824e-03, -+-2.61224793463516640271e-03, -+-2.64939866651717941329e-03, -+-2.68500766655144999101e-03, -+-2.71905577419492448452e-03, -+-2.75152473523297344538e-03, -+-2.78239721151426859513e-03, -+-2.81165679015500094215e-03, -+-2.83928799220713222809e-03, -+-2.86527628078656016949e-03, -+-2.88960806865697647852e-03, -+-2.91227072526506090486e-03, -+-2.93325258322398594105e-03, -+-2.95254294424161442545e-03, -+-2.97013208449042583406e-03, -+-2.98601125941669364242e-03, -+-3.00017270798633986159e-03, -+-3.01260965636595103370e-03, -+-3.02331632103655656429e-03, -+-3.03228791133956007003e-03, -+-3.03952063145331409857e-03, -+-3.04501168179985596748e-03, -+-3.04875925988140573583e-03, -+-3.05076256054652829655e-03, -+-3.05102177568631911103e-03, -+-3.04953809336118561099e-03, -+-3.04631369635912632385e-03, -+-3.04135176018685343333e-03, -+-3.03465645049527405624e-03, -+-3.02623291994119940004e-03, -+-3.01608730448767094895e-03, -+-3.00422671914520132003e-03, -+-2.99065925315701369377e-03, -+-2.97539396463139928575e-03, -+-2.95844087462449664011e-03, -+-2.93981096067755893683e-03, -+-2.91951614981275815730e-03, -+-2.89756931099181044148e-03, -+-2.87398424704220179990e-03, -+-2.84877568605616283970e-03, -+-2.82195927226750430117e-03, -+-2.79355155641210087594e-03, -+-2.76356998557781771697e-03, -+-2.73203289255012551212e-03, -+-2.69895948465983821080e-03, -+-2.66436983213977395327e-03, -+-2.62828485599736526648e-03, -+-2.59072631541029923391e-03, -+-2.55171679465334083972e-03, -+-2.51127968956342670012e-03, -+-2.46943919355152629105e-03, -+-2.42622028316987056393e-03, -+-2.38164870324227831086e-03, -+-2.33575095156724138815e-03, -+-2.28855426320279282948e-03, -+-2.24008659434175860792e-03, -+-2.19037660578759365432e-03, -+-2.13945364604031535577e-03, -+-2.08734773400249444888e-03, -+-2.03408954131547529270e-03, -+-1.97971037433622041798e-03, -+-1.92424215576537916382e-03, -+-1.86771740593727280343e-03, -+-1.81016922378279560696e-03, -+-1.75163126747638459545e-03, -+-1.69213773477834518097e-03, -+-1.63172334308366137785e-03, -+-1.57042330918990852978e-03, -+-1.50827332879462073199e-03, -+-1.44530955573546056152e-03, -+-1.38156858098379938318e-03, -+-1.31708741140545613178e-03, -+-1.25190344829938021362e-03, -+-1.18605446572830376673e-03, -+-1.11957858865226037894e-03, -+-1.05251427087881964557e-03, -+-9.84900272842268017723e-04, -+-9.16775639224670039346e-04, -+-8.48179676431708726506e-04, -+-7.79151929936275832941e-04, -+-7.09732161502877071865e-04, -+-6.39960326305943926796e-04, -+-5.69876549955214807899e-04, -+-4.99521105441456947371e-04, -+-4.28934390015275781964e-04, -+-3.58156902013427212109e-04, -+-2.87229217644762195236e-04, -+-2.16191967749079295199e-04, -+-1.45085814543370996213e-04, -+-7.39514283676623567637e-05, -+-2.82946444373383170840e-06, -+ 6.82394603388270838424e-05, -+ 1.39214790597688687322e-04, -+ 2.10056055579472498182e-04, -+ 2.80722892215425577894e-04, -+ 3.51175068097857930472e-04, -+ 4.21372504364276407804e-04, -+ 4.91275298476219653143e-04, -+ 5.60843746879846811494e-04, -+ 6.30038367535434352430e-04, -+ 6.98819922302998017792e-04, -+ 7.67149439171379990757e-04, -+ 8.34988234318114982448e-04, -+ 9.02297933988172430955e-04, -+ 9.69040496177550657667e-04, -+ 1.03517823211224553603e-03, -+ 1.10067382750771766003e-03, -+ 1.16549036359852469825e-03, -+ 1.22959133792568584519e-03, -+ 1.29294068487057216450e-03, -+ 1.35550279592269035112e-03, -+ 1.41724253967147762606e-03, -+ 1.47812528150976737508e-03, -+ 1.53811690303841180558e-03, -+ 1.59718382116064388891e-03, -+ 1.65529300685696286952e-03, -+ 1.71241200362764220237e-03, -+ 1.76850894559496454178e-03, -+ 1.82355257525374002750e-03, -+ 1.87751226086060006570e-03, -+ 1.93035801345242652959e-03, -+ 1.98206050348444977674e-03, -+ 2.03259107707881624474e-03, -+ 2.08192177187458684826e-03, -+ 2.13002533247049928231e-03, -+ 2.17687522545193749141e-03, -+ 2.22244565399375279199e-03, -+ 2.26671157203132793423e-03, -+ 2.30964869799124257813e-03, -+ 2.35123352807515510060e-03, -+ 2.39144334908883470295e-03, -+ 2.43025625080947474746e-03, -+ 2.46765113788514900417e-03, -+ 2.50360774125928499736e-03, -+ 2.53810662911404865891e-03, -+ 2.57112921732736803004e-03, -+ 2.60265777943738526798e-03, -+ 2.63267545610921865559e-03, -+ 2.66116626409909065240e-03, -+ 2.68811510471097300096e-03, -+ 2.71350777174133141537e-03, -+ 2.73733095890790929794e-03, -+ 2.75957226675855411477e-03, -+ 2.78022020905670675522e-03, -+ 2.79926421864012953122e-03, -+ 2.81669465275010289657e-03, -+ 2.83250279782839122292e-03, -+ 2.84668087377948006433e-03, -+ 2.85922203769641003479e-03, -+ 2.87012038704810915068e-03, -+ 2.87937096232720231986e-03, -+ 2.88696974915680091081e-03, -+ 2.89291367985583221592e-03, -+ 2.89720063446215116837e-03, -+ 2.89982944121351280883e-03, -+ 2.90079987648640116524e-03, -+ 2.90011266419314345591e-03, -+ 2.89776947463821947862e-03, -+ 2.89377292283466130279e-03, -+ 2.88812656628207459208e-03, -+ 2.88083490220782285907e-03, -+ 2.87190336427351573453e-03, -+ 2.86133831874895577796e-03, -+ 2.84914706015623872201e-03, -+ 2.83533780638680265804e-03, -+ 2.81991969329480843959e-03, -+ 2.80290276877008005807e-03, -+ 2.78429798629470500945e-03, -+ 2.76411719798695795433e-03, -+ 2.74237314713741920855e-03, -+ 2.71907946024148436046e-03, -+ 2.69425063853359278432e-03, -+ 2.66790204902807304155e-03, -+ 2.64004991507226990932e-03, -+ 2.61071130641776349285e-03, -+ 2.57990412881558845576e-03, -+ 2.54764711314187488125e-03, -+ 2.51395980406045370728e-03, -+ 2.47886254822925330629e-03, -+ 2.44237648205756618242e-03, -+ 2.40452351902155575872e-03, -+ 2.36532633654565121670e-03, -+ 2.32480836245730617881e-03, -+ 2.28299376102392148624e-03, -+ 2.23990741857956789096e-03, -+ 2.19557492874996457166e-03, -+ 2.15002257728523623811e-03, -+ 2.10327732650867141317e-03, -+ 2.05536679939101810111e-03, -+ 2.00631926325935171576e-03, -+ 1.95616361315094399245e-03, -+ 1.90492935482074665296e-03, -+ 1.85264658741337391243e-03, -+ 1.79934598580928591972e-03, -+ 1.74505878265607109780e-03, -+ 1.68981675009393424863e-03, -+ 1.63365218118834728926e-03, -+ 1.57659787107846988304e-03, -+ 1.51868709785361530318e-03, -+ 1.45995360316849881639e-03, -+ 1.40043157260870475105e-03, -+ 1.34015561581719584022e-03, -+ 1.27916074639499105850e-03, -+ 1.21748236158513117693e-03, -+ 1.15515622175421423141e-03, -+ 1.09221842968186999730e-03, -+ 1.02870540967075650360e-03, -+ 9.64653886488606908747e-04, -+ 9.00100864155625344717e-04, -+ 8.35083604587965547955e-04, -+ 7.69639606110740720837e-04, -+ 7.03806581852404870327e-04, -+ 6.37622438033560502181e-04, -+ 5.71125252161062339600e-04, -+ 5.04353251142653142593e-04, -+ 4.37344789331979761672e-04, -+ 3.70138326518233945050e-04, -+ 3.02772405872475636971e-04, -+ 2.35285631863361933882e-04, -+ 1.67716648154917370023e-04, -+ 1.00104115498995325769e-04, -+ 3.24866896350573601776e-05, -+-3.50970007900988141157e-05, -+-1.02608376270067855503e-04, -+-1.70008928441366460871e-04, -+-2.37260242028708613496e-04, -+-3.04324016719330044459e-04, -+-3.71162088955520488940e-04, -+-4.37736453631852389604e-04, -+-5.04009285684787491054e-04, -+-5.69942961563439155249e-04, -+-6.35500080568199678457e-04, -+-7.00643486045153811477e-04, -+-7.65336286425376288202e-04, -+-8.29541876096107381675e-04, -+-8.93223956092492241653e-04, -+-9.56346554598112288600e-04, -+-1.01887404724274391321e-03, -+-1.08077117718591146113e-03, -+-1.14200307497491554062e-03, -+-1.20253527816616481716e-03, -+-1.26233375069880002922e-03, -+-1.32136490200969610419e-03, -+-1.37959560587909771390e-03, -+-1.43699321899669958842e-03, -+-1.49352559923677944212e-03, -+-1.54916112363357523669e-03, -+-1.60386870604548384400e-03, -+-1.65761781449959505821e-03, -+-1.71037848820545417342e-03, -+-1.76212135422995869009e-03, -+-1.81281764382279454370e-03, -+-1.86243920838466956759e-03, -+-1.91095853506853020909e-03, -+-1.95834876200555885878e-03, -+-2.00458369314743039755e-03, -+-2.04963781271666782222e-03, -+-2.09348629925715234990e-03, -+-2.13610503927705698904e-03, -+-2.17747064047668550252e-03, -+-2.21756044455409095234e-03, -+-2.25635253958129250451e-03, -+-2.29382577194474921237e-03, -+-2.32995975784284353738e-03, -+-2.36473489433514528352e-03, -+-2.39813236993652442383e-03, -+-2.43013417475133235504e-03, -+-2.46072311014130552798e-03, -+-2.48988279792284553787e-03, -+-2.51759768908801960866e-03, -+-2.54385307204538875167e-03, -+-2.56863508037586708854e-03, -+-2.59193070009968232204e-03, -+-2.61372777645068558178e-03, -+-2.63401502015447874783e-03, -+-2.65278201320723284670e-03, -+-2.67001921415216522324e-03, -+-2.68571796285115840450e-03, -+-2.69987048474913367627e-03, -+-2.71246989462914107200e-03, -+-2.72351019985639722365e-03, -+-2.73298630310992796480e-03, -+-2.74089400460035331406e-03, -+-2.74723000377341628614e-03, -+-2.75199190049820862497e-03, -+-2.75517819574011687753e-03, -+-2.75678829171838255668e-03, -+-2.75682249154861379672e-03, -+-2.75528199837085348636e-03, -+-2.75216891396407340939e-03, -+-2.74748623684835597061e-03, -+-2.74123785987614347961e-03, -+-2.73342856731443109575e-03, -+-2.72406403141984849309e-03, -+-2.71315080850912087457e-03, -+-2.70069633452742902113e-03, -+-2.68670892011764299301e-03, -+-2.67119774519362050691e-03, -+-2.65417285302107976847e-03, -+-2.63564514380968837812e-03, -+-2.61562636782076193137e-03, -+-2.59412911799431541299e-03, -+-2.57116682210057310998e-03, -+-2.54675373442056615300e-03, -+-2.52090492696093165098e-03, -+-2.49363628020824292311e-03, -+-2.46496447342882049614e-03, -+-2.43490697451945311766e-03, -+-2.40348202941552966175e-03, -+-2.37070865106279527260e-03, -+-2.33660660795969189057e-03, -+-2.30119641227629137537e-03, -+-2.26449930755836560670e-03, -+-2.22653725602254669996e-03, -+-2.18733292545093653547e-03, -+-2.14690967569279187940e-03, -+-2.10529154478122275743e-03, -+-2.06250323467321427379e-03, -+-2.01857009662140480036e-03, -+-1.97351811618623213668e-03, -+-1.92737389789730405483e-03, -+-1.88016464957305564146e-03, -+-1.83191816630788313451e-03, -+-1.78266281413625186578e-03, -+-1.73242751338296301945e-03, -+-1.68124172171028180012e-03, -+-1.62913541687057699184e-03, -+-1.57613907917578230551e-03, -+-1.52228367369270224489e-03, -+-1.46760063217584650445e-03, -+-1.41212183474704526358e-03, -+-1.35587959133381627010e-03, -+-1.29890662287597178325e-03, -+-1.24123604231228925124e-03, -+-1.18290133535796414613e-03, -+-1.12393634108397949545e-03, -+-1.06437523230972224016e-03, -+-1.00425249582011886888e-03, -+-9.43602912418799676629e-04, -+-8.82461536828750689118e-04, -+-8.20863677452122195502e-04, -+-7.58844876000883323576e-04, -+-6.96440887009666122730e-04, -+-6.33687657243661695526e-04, -+-5.70621305011907871928e-04, -+-5.07278099399384235432e-04, -+-4.43694439428299856887e-04, -+-3.79906833162163342851e-04, -+-3.15951876763069777060e-04, -+-2.51866233515757136346e-04, -+-1.87686612828893105692e-04, -+-1.23449749226707587929e-04, -+-5.91923813425564756662e-05, -+ 5.04876907352367874530e-06, -+ 6.92370181212766702379e-05, -+ 1.33335740678748094525e-04, -+ 1.97308391280935971606e-04, -+ 2.61118524936681541647e-04, -+ 3.24729817871949365607e-04, -+ 3.88106088187632042828e-04, -+ 4.51211316420591741425e-04, -+ 5.14009665995129438193e-04, -+ 5.76465503554872784643e-04, -+ 6.38543419161980286940e-04, -+ 7.00208246353774092785e-04, -+ 7.61425082043918786609e-04, -+ 8.22159306257914143483e-04, -+ 8.82376601691744100360e-04, -+ 9.42042973081658576232e-04, -+ 1.00112476637558055551e-03, -+ 1.05958868769426566188e-03, -+ 1.11740182207199128042e-03, -+ 1.17453165196615329918e-03, -+ 1.23094607552536169578e-03, -+ 1.28661342460581668880e-03, -+ 1.34150248252584160767e-03, -+ 1.39558250154863013048e-03, -+ 1.44882322008345787619e-03, -+ 1.50119487959565409141e-03, -+ 1.55266824121634344422e-03, -+ 1.60321460204141557661e-03, -+ 1.65280581111278590707e-03, -+ 1.70141428507094454904e-03, -+ 1.74901302347134422581e-03, -+ 1.79557562375571026954e-03, -+ 1.84107629587033070663e-03, -+ 1.88548987652245613779e-03, -+ 1.92879184306802143982e-03, -+ 1.97095832702225181102e-03, -+ 2.01196612718603342132e-03, -+ 2.05179272238057222588e-03, -+ 2.09041628378424165433e-03, -+ 2.12781568686330919971e-03, -+ 2.16397052289168034464e-03, -+ 2.19886111005235902402e-03, -+ 2.23246850411500585495e-03, -+ 2.26477450868369997727e-03, -+ 2.29576168500963484834e-03, -+ 2.32541336136273067009e-03, -+ 2.35371364195842858874e-03, -+ 2.38064741543364153872e-03, -+ 2.40620036286810995776e-03, -+ 2.43035896534666076563e-03, -+ 2.45311051105864775732e-03, -+ 2.47444310193039576293e-03, -+ 2.49434565978784222526e-03, -+ 2.51280793204573761265e-03, -+ 2.52982049692079043884e-03, -+ 2.54537476816590630541e-03, -+ 2.55946299932366090960e-03, -+ 2.57207828749620934228e-03, -+ 2.58321457663059431131e-03, -+ 2.59286666031753468623e-03, -+ 2.60103018410256332446e-03, -+ 2.60770164730860518412e-03, -+ 2.61287840436931441054e-03, -+ 2.61655866567281477839e-03, -+ 2.61874149791569560408e-03, -+ 2.61942682396747910170e-03, -+ 2.61861542224603579751e-03, -+ 2.61630892560461673912e-03, -+ 2.61250981973162573271e-03, -+ 2.60722144106427262261e-03, -+ 2.60044797421789914901e-03, -+ 2.59219444893257419671e-03, -+ 2.58246673653929684211e-03, -+ 2.57127154594804412449e-03, -+ 2.55861641916043432848e-03, -+ 2.54450972630984205078e-03, -+ 2.52896066023234862910e-03, -+ 2.51197923057173110040e-03, -+ 2.49357625742245613346e-03, -+ 2.47376336451454867035e-03, -+ 2.45255297194462698260e-03, -+ 2.42995828845761051989e-03, -+ 2.40599330328385152544e-03, -+ 2.38067277753669032450e-03, -+ 2.35401223517576205571e-03, -+ 2.32602795354144506468e-03, -+ 2.29673695346632733560e-03, -+ 2.26615698896941598212e-03, -+ 2.23430653653983570320e-03, -+ 2.20120478401572821497e-03, -+ 2.16687161906578855050e-03, -+ 2.13132761727950238717e-03, -+ 2.09459402987411226829e-03, -+ 2.05669277102470907798e-03, -+ 2.01764640482596626161e-03, -+ 1.97747813189227050409e-03, -+ 1.93621177560486024995e-03, -+ 1.89387176801387676663e-03, -+ 1.85048313540364336473e-03, -+ 1.80607148352974512806e-03, -+ 1.76066298253653116292e-03, -+ 1.71428435156398707023e-03, -+ 1.66696284305293466847e-03, -+ 1.61872622675783670206e-03, -+ 1.56960277347651289311e-03, -+ 1.51962123850639114868e-03, -+ 1.46881084483655192582e-03, -+ 1.41720126608627463617e-03, -+ 1.36482260919915132126e-03, -+ 1.31170539690283571681e-03, -+ 1.25788054994554945182e-03, -+ 1.20337936911878791608e-03, -+ 1.14823351707673366670e-03, -+ 1.09247499996376496584e-03, -+ 1.03613614885946750573e-03, -+ 9.79249601052817287769e-04, -+ 9.21848281156024094984e-04, -+ 8.63965382068984373391e-04, -+ 8.05634345805350776497e-04, -+ 7.46888844191288077054e-04, -+ 6.87762759448037191978e-04, -+ 6.28290164669462083795e-04, -+ 5.68505304205851338083e-04, -+ 5.08442573965285464499e-04, -+ 4.48136501643423001973e-04, -+ 3.87621726894541677056e-04, -+ 3.26932981452717592256e-04, -+ 2.66105069217038663586e-04, -+ 2.05172846310758418649e-04, -+ 1.44171201126380563911e-04, -+ 8.31350343675788742547e-05, -+ 2.20992391004467811420e-05, -+-3.89013191759796718742e-05, -+-9.98318224274676811183e-05, -+-1.60657519939763258031e-04, -+-2.21343748119307129384e-04, -+-2.81855950229735626421e-04, -+-3.42159696050412485968e-04, -+-4.02220701448342615129e-04, -+-4.62004847850846784695e-04, -+-5.21478201608437975934e-04, -+-5.80607033236791485534e-04, -+-6.39357836527398360783e-04, -+-6.97697347514598421869e-04, -+-7.55592563290745562223e-04, -+-8.13010760656402635231e-04, -+-8.69919514596503569252e-04, -+-9.26286716571595044288e-04, -+-9.82080592613842522434e-04, -+-1.03726972121798914454e-03, -+-1.09182305101626067265e-03, -+-1.14570991822856215955e-03, -+-1.19890006387727231750e-03, -+-1.25136365075697989814e-03, -+-1.30307128015050440427e-03, -+-1.35399400828092701665e-03, -+-1.40410336249047434758e-03, -+-1.45337135713807666729e-03, -+-1.50177050920588701921e-03, -+-1.54927385360641156620e-03, -+-1.59585495818171090726e-03, -+-1.64148793838632899543e-03, -+-1.68614747164579970896e-03, -+-1.72980881138278994556e-03, -+-1.77244780070314389073e-03, -+-1.81404088573422256521e-03, -+-1.85456512860821833531e-03, -+-1.89399822008349183119e-03, -+-1.93231849179640994586e-03, -+-1.96950492813784778720e-03, -+-2.00553717774697637041e-03, -+-2.04039556461697076800e-03, -+-2.07406109880563802386e-03, -+-2.10651548674606337030e-03, -+-2.13774114115079620635e-03, -+-2.16772119050517375963e-03, -+-2.19643948814392904120e-03, -+-2.22388062090664783907e-03, -+-2.25002991736723010133e-03, -+-2.27487345563314293309e-03, -+-2.29839807071028278881e-03, -+-2.32059136142953635965e-03, -+-2.34144169693150825881e-03, -+-2.36093822270602455432e-03, -+-2.37907086618326232483e-03, -+-2.39583034187382639194e-03, -+-2.41120815605485715877e-03, -+-2.42519661100030125764e-03, -+-2.43778880875283833138e-03, -+-2.44897865443608397581e-03, -+-2.45876085910516064756e-03, -+-2.46713094213460307561e-03, -+-2.47408523314259810866e-03, -+-2.47962087345062007909e-03, -+-2.48373581707827476711e-03, -+-2.48642883127294603979e-03, -+-2.48769949657436095780e-03, -+-2.48754820641444327964e-03, -+-2.48597616625299746435e-03, -+-2.48298539225010744813e-03, -+-2.47857870947639034181e-03, -+-2.47275974966242300529e-03, -+-2.46553294848908619713e-03, -+-2.45690354242066423887e-03, -+-2.44687756508286339413e-03, -+-2.43546184318826561266e-03, -+-2.42266399201183056655e-03, -+-2.40849241041931304286e-03, -+-2.39295627545196452554e-03, -+-2.37606553647086871789e-03, -+-2.35783090886447369364e-03, -+-2.33826386732362018900e-03, -+-2.31737663868781000251e-03, -+-2.29518219436743642001e-03, -+-2.27169424234655459999e-03, -+-2.24692721877107516593e-03, -+-2.22089627912754614472e-03, -+-2.19361728901783497453e-03, -+-2.16510681453538442881e-03, -+-2.13538211224875490099e-03, -+-2.10446111879856838367e-03, -+-2.07236244011410305002e-03, -+-2.03910534025573964012e-03, -+-2.00470972989070942219e-03, -+-1.96919615440774254875e-03, -+-1.93258578167894933507e-03, -+-1.89490038947546677803e-03, -+-1.85616235254462648083e-03, -+-1.81639462935595909568e-03, -+-1.77562074852458812169e-03, -+-1.73386479491910482434e-03, -+-1.69115139546278155785e-03, -+-1.64750570463616328315e-03, -+-1.60295338968996568633e-03, -+-1.55752061557586866242e-03, -+-1.51123402960583901912e-03, -+-1.46412074584717846748e-03, -+-1.41620832926347625658e-03, -+-1.36752477961040201301e-03, -+-1.31809851509572971071e-03, -+-1.26795835581320162112e-03, -+-1.21713350695978428199e-03, -+-1.16565354184613783825e-03, -+-1.11354838471016369394e-03, -+-1.06084829334356697123e-03, -+-1.00758384154156217620e-03, -+-9.53785901385918667879e-04, -+-8.99485625371226915105e-04, -+-8.44714428385682711276e-04, -+-7.89503969555520172287e-04, -+-7.33886133964478507875e-04, -+-6.77893014258843288299e-04, -+-6.21556892147806690219e-04, -+-5.64910219810742480866e-04, -+-5.07985601222065157219e-04, -+-4.50815773403514705956e-04, -+-3.93433587615536740044e-04, -+-3.35871990498167328609e-04, -+-2.78164005172315390892e-04, -+-2.20342712312250957329e-04, -+-1.62441231200158043299e-04, -+-1.04492700773580143945e-04, -+-4.65302606765986506319e-05, -+ 1.14129676744331286925e-05, -+ 6.93038999997214335376e-05, -+ 1.27109508029058849467e-04, -+ 1.84796838327256962358e-04, -+ 2.42333031062709627164e-04, -+ 2.99685338706966609285e-04, -+ 3.56821144656121883639e-04, -+ 4.13707981761937345928e-04, -+ 4.70313550763611239701e-04, -+ 5.26605738608316954405e-04, -+ 5.82552636651546872429e-04, -+ 6.38122558725952955180e-04, -+ 6.93284059068853498672e-04, -+ 7.48005950098214232938e-04, -+ 8.02257320027068118913e-04, -+ 8.56007550306428347843e-04, -+ 9.09226332886875140971e-04, -+ 9.61883687289077828758e-04, -+ 1.01394997747366656139e-03, -+ 1.06539592850096254475e-03, -+ 1.11619264297115245756e-03, -+ 1.16631161723606104411e-03, -+ 1.21572475737255643845e-03, -+ 1.26440439490956338907e-03, -+ 1.31232330229981257463e-03, -+ 1.35945470812689692131e-03, -+ 1.40577231203991388428e-03, -+ 1.45125029940738111550e-03, -+ 1.49586335568145547929e-03, -+ 1.53958668046561540123e-03, -+ 1.58239600127717565045e-03, -+ 1.62426758699731900969e-03, -+ 1.66517826100116947581e-03, -+ 1.70510541396065628053e-03, -+ 1.74402701631310862347e-03, -+ 1.78192163038870358960e-03, -+ 1.81876842219015340089e-03, -+ 1.85454717281811399567e-03, -+ 1.88923828953608337507e-03, -+ 1.92282281646894998711e-03, -+ 1.95528244492883035086e-03, -+ 1.98659952336315047752e-03, -+ 2.01675706691958021854e-03, -+ 2.04573876662207838895e-03, -+ 2.07352899815367369349e-03, -+ 2.10011283024123633634e-03, -+ 2.12547603263724084119e-03, -+ 2.14960508369503545609e-03, -+ 2.17248717753304627920e-03, -+ 2.19411023078435168249e-03, -+ 2.21446288892813546861e-03, -+ 2.23353453219959832005e-03, -+ 2.25131528107543575634e-03, -+ 2.26779600133197476938e-03, -+ 2.28296830867344077709e-03, -+ 2.29682457292811666866e-03, -+ 2.30935792181020602132e-03, -+ 2.32056224424581451771e-03, -+ 2.33043219326110580616e-03, -+ 2.33896318843187242878e-03, -+ 2.34615141789296230077e-03, -+ 2.35199383990705723768e-03, -+ 2.35648818399214129982e-03, -+ 2.35963295160742693446e-03, -+ 2.36142741639763483266e-03, -+ 2.36187162399587079545e-03, -+ 2.36096639138556364801e-03, -+ 2.35871330582219018365e-03, -+ 2.35511472331569049476e-03, -+ 2.35017376667488861117e-03, -+ 2.34389432311526155553e-03, -+ 2.33628104143192337830e-03, -+ 2.32733932873959879425e-03, -+ 2.31707534678196646130e-03, -+ 2.30549600781271638028e-03, -+ 2.29260897005103539067e-03, -+ 2.27842263271448887407e-03, -+ 2.26294613063242897391e-03, -+ 2.24618932844335367563e-03, -+ 2.22816281437991214193e-03, -+ 2.20887789364531414785e-03, -+ 2.18834658138542404587e-03, -+ 2.16658159526062063169e-03, -+ 2.14359634762239202599e-03, -+ 2.11940493729897636022e-03, -+ 2.09402214099534654534e-03, -+ 2.06746340431283176509e-03, -+ 2.03974483239339685059e-03, -+ 2.01088318019464239519e-03, -+ 1.98089584240138030097e-03, -+ 1.94980084297942022308e-03, -+ 1.91761682437821957652e-03, -+ 1.88436303638870564399e-03, -+ 1.85005932466290553585e-03, -+ 1.81472611890221816218e-03, -+ 1.77838442072136338791e-03, -+ 1.74105579119516714129e-03, -+ 1.70276233809558063745e-03, -+ 1.66352670282644788877e-03, -+ 1.62337204706380910935e-03, -+ 1.58232203910926546089e-03, -+ 1.54040083996521471633e-03, -+ 1.49763308913912528489e-03, -+ 1.45404389018587740061e-03, -+ 1.40965879599663345551e-03, -+ 1.36450379384215388784e-03, -+ 1.31860529018035092276e-03, -+ 1.27199009523587059159e-03, -+ 1.22468540736182600857e-03, -+ 1.17671879719162628813e-03, -+ 1.12811819159096510083e-03, -+ 1.07891185741895972300e-03, -+ 1.02912838510792908377e-03, -+ 9.78796672071337260299e-04, -+ 9.27945905949520053434e-04, -+ 8.76605547702895976370e-04, -+ 8.24805314562447990448e-04, -+ 7.72575162847333337356e-04, -+ 7.19945270659597320352e-04, -+ 6.66946020465617123510e-04, -+ 6.13607981575178514436e-04, -+ 5.59961892527424567705e-04, -+ 5.06038643393795593145e-04, -+ 4.51869258009022058478e-04, -+ 3.97484876139576502260e-04, -+ 3.42916735599798760004e-04, -+ 2.88196154326876910479e-04, -+ 2.33354512423656609626e-04, -+ 1.78423234180534077487e-04, -+ 1.23433770086348173567e-04, -+ 6.84175788386079240409e-05, -+ 1.34061093633470900020e-05, -+-4.15692171451308774711e-05, -+-9.64770251543709412689e-05, -+-1.51286002683524126340e-04, -+-2.05964919142553784092e-04, -+-2.60482643110675150724e-04, -+-3.14808160044301459275e-04, -+-3.68910589903529524333e-04, -+-4.22759204688063789518e-04, -+-4.76323445872630008881e-04, -+-5.29572941731087281150e-04, -+-5.82477524540275987987e-04, -+-6.35007247653846472989e-04, -+-6.87132402435543243602e-04, -+-7.38823535043645019879e-04, -+-7.90051463056118570549e-04, -+-8.40787291927532235911e-04, -+-8.91002431268342548823e-04, -+-9.40668610937454570224e-04, -+-9.89757896938941268347e-04, -+-1.03824270711407040668e-03, -+-1.08609582661974403764e-03, -+-1.13329042318477575535e-03, -+-1.17980006213536797732e-03, -+-1.22559872118147396639e-03, -+-1.27066080495571239080e-03, -+-1.31496115929677771621e-03, -+-1.35847508526934588474e-03, -+-1.40117835291272236839e-03, -+-1.44304721471052890651e-03, -+-1.48405841877397026707e-03, -+-1.52418922173162092390e-03, -+-1.56341740131789178406e-03, -+-1.60172126865418262831e-03, -+-1.63907968021530041879e-03, -+-1.67547204947450902382e-03, -+-1.71087835822147623158e-03, -+-1.74527916754618566374e-03, -+-1.77865562848291466208e-03, -+-1.81098949230900328755e-03, -+-1.84226312049221930059e-03, -+-1.87245949428157002978e-03, -+-1.90156222393633397329e-03, -+-1.92955555758831764739e-03, -+-1.95642438973256090409e-03, -+-1.98215426934193923725e-03, -+-2.00673140760134708499e-03, -+-2.03014268525729749126e-03, -+-2.05237565957906665723e-03, -+-2.07341857092785582239e-03, -+-2.09326034893013391766e-03, -+-2.11189061825244484699e-03, -+-2.12929970397441031132e-03, -+-2.14547863655709580497e-03, -+-2.16041915640460824299e-03, -+-2.17411371801621297953e-03, -+-2.18655549372708977660e-03, -+-2.19773837703605891963e-03, -+-2.20765698551850719430e-03, -+-2.21630666332326515741e-03, -+-2.22368348325234152507e-03, -+-2.22978424842263864281e-03, -+-2.23460649350903971591e-03, -+-2.23814848556852345751e-03, -+-2.24040922444509972219e-03, -+-2.24138844275575217432e-03, -+-2.24108660545765600580e-03, -+-2.23950490899731862252e-03, -+-2.23664528004239790415e-03, -+-2.23251037379732560767e-03, -+-2.22710357190395455765e-03, -+-2.22042897992885809519e-03, -+-2.21249142443891893065e-03, -+-2.20329644966735498784e-03, -+-2.19285031377223701976e-03, -+-2.18115998469021890940e-03, -+-2.16823313558786156391e-03, -+-2.15407813991372407841e-03, -+-2.13870406605424102225e-03, -+-2.12212067159678200237e-03, -+-2.10433839720351734126e-03, -+-2.08536836009985638782e-03, -+-2.06522234718151120880e-03, -+-2.04391280774443356502e-03, -+-2.02145284584207300324e-03, -+-1.99785621227463244462e-03, -+-1.97313729621508525403e-03, -+-1.94731111647731430260e-03, -+-1.92039331243139960170e-03, -+-1.89240013457138639766e-03, -+-1.86334843474168982726e-03, -+-1.83325565602760116347e-03, -+-1.80213982231590299880e-03, -+-1.77001952753231455231e-03, -+-1.73691392456148648374e-03, -+-1.70284271385666495340e-03, -+-1.66782613174552775577e-03, -+-1.63188493843921685576e-03, -+-1.59504040575159230717e-03, -+-1.55731430453603003801e-03, -+-1.51872889184707753063e-03, -+-1.47930689783463205529e-03, -+-1.43907151237822393368e-03, -+-1.39804637146942033893e-03, -+-1.35625554334995140730e-03, -+-1.31372351441438970504e-03, -+-1.27047517488496053938e-03, -+-1.22653580426682431471e-03, -+-1.18193105659301824634e-03, -+-1.13668694546695714549e-03, -+-1.09082982891158691320e-03, -+-1.04438639403357878127e-03, -+-9.97383641512322120098e-04, -+-9.49848869921641547967e-04, -+-9.01809659894115857315e-04, -+-8.53293858136809635351e-04, -+-8.04329561308134524146e-04, -+-7.54945099763940303053e-04, -+-7.05169021184243009770e-04, -+-6.55030074088056891990e-04, -+-6.04557191246998305335e-04, -+-5.53779473006872830811e-04, -+-5.02726170526861184003e-04, -+-4.51426668945984269337e-04, -+-3.99910470486500410799e-04, -+-3.48207177503949535848e-04, -+-2.96346475493580014358e-04, -+-2.44358116062887999707e-04, -+-1.92271899880109192792e-04, -+-1.40117659608033219131e-04, -+-8.79252428338516013985e-05, -+-3.57244950035476513677e-05, -+ 1.64547576285501491889e-05, -+ 6.85827250253236744533e-05, -+ 1.20629670358623862633e-04, -+ 1.72565926956682051847e-04, -+ 2.24361915197526828099e-04, -+ 2.75988159339660512649e-04, -+ 3.27415304279563739234e-04, -+ 3.78614132226878525450e-04, -+ 4.29555579287748767834e-04, -+ 4.80210751946913818114e-04, -+ 5.30550943439215389429e-04, -+ 5.80547650001254260735e-04, -+ 6.30172586994006268639e-04, -+ 6.79397704887282211095e-04, -+ 7.28195205096961932327e-04, -+ 7.76537555666397547385e-04, -+ 8.24397506782311470346e-04, -+ 8.71748106117578472167e-04, -+ 9.18562713991485446999e-04, -+ 9.64815018338932312708e-04, -+ 1.01047904948097389682e-03, -+ 1.05552919468725366070e-03, -+ 1.09994021252330666759e-03, -+ 1.14368724697360216180e-03, -+ 1.18674584133354179757e-03, -+ 1.22909195186185872875e-03, -+ 1.27070196118612760081e-03, -+ 1.31155269145389143971e-03, -+ 1.35162141722206191954e-03, -+ 1.39088587807745310380e-03, -+ 1.42932429098146206170e-03, -+ 1.46691536233205330891e-03, -+ 1.50363829973637033906e-03, -+ 1.53947282348746166021e-03, -+ 1.57439917773903939602e-03, -+ 1.60839814137149570566e-03, -+ 1.64145103854408192304e-03, -+ 1.67353974892666301950e-03, -+ 1.70464671760622052225e-03, -+ 1.73475496466189292762e-03, -+ 1.76384809440413852129e-03, -+ 1.79191030427224506048e-03, -+ 1.81892639338610754944e-03, -+ 1.84488177074716187820e-03, -+ 1.86976246308427976328e-03, -+ 1.89355512234033978962e-03, -+ 1.91624703279555906599e-03, -+ 1.93782611782377474016e-03, -+ 1.95828094627808731512e-03, -+ 1.97760073850255548022e-03, -+ 1.99577537196677290074e-03, -+ 2.01279538652043366379e-03, -+ 2.02865198926522683279e-03, -+ 2.04333705904144154533e-03, -+ 2.05684315052714027094e-03, -+ 2.06916349794801935486e-03, -+ 2.08029201839576892777e-03, -+ 2.09022331475368274706e-03, -+ 2.09895267822806817423e-03, -+ 2.10647609048419644576e-03, -+ 2.11279022538611149090e-03, -+ 2.11789245033947156824e-03, -+ 2.12178082723701432605e-03, -+ 2.12445411300643061461e-03, -+ 2.12591175976064054517e-03, -+ 2.12615391455073503985e-03, -+ 2.12518141872201785439e-03, -+ 2.12299580687382158026e-03, -+ 2.11959930542408034673e-03, -+ 2.11499483077969572045e-03, -+ 2.10918598711416641414e-03, -+ 2.10217706375393116602e-03, -+ 2.09397303217547263096e-03, -+ 2.08457954261486583247e-03, -+ 2.07400292029235070942e-03, -+ 2.06225016125420471461e-03, -+ 2.04932892783467367551e-03, -+ 2.03524754374076423044e-03, -+ 2.02001498876324889209e-03, -+ 2.00364089311688611111e-03, -+ 1.98613553141360494464e-03, -+ 1.96750981627234018331e-03, -+ 1.94777529156955181953e-03, -+ 1.92694412533416631859e-03, -+ 1.90502910229207360684e-03, -+ 1.88204361606385760751e-03, -+ 1.85800166102108787677e-03, -+ 1.83291782380585869562e-03, -+ 1.80680727451872601141e-03, -+ 1.77968575758040859630e-03, -+ 1.75156958227263453466e-03, -+ 1.72247561296389362258e-03, -+ 1.69242125902588661998e-03, -+ 1.66142446444668846067e-03, -+ 1.62950369714685090912e-03, -+ 1.59667793800455284220e-03, -+ 1.56296666959689989698e-03, -+ 1.52838986466322470682e-03, -+ 1.49296797429780258443e-03, -+ 1.45672191587891005325e-03, -+ 1.41967306074082186274e-03, -+ 1.38184322159656857235e-03, -+ 1.34325463971886609367e-03, -+ 1.30392997188612789518e-03, -+ 1.26389227710180132407e-03, -+ 1.22316500309457604385e-03, -+ 1.18177197260732505350e-03, -+ 1.13973736948289701074e-03, -+ 1.09708572455475997058e-03, -+ 1.05384190135080434668e-03, -+ 1.01003108161856368016e-03, -+ 9.65678750680322895046e-04, -+ 9.20810682626568323406e-04, -+ 8.75452925356471657603e-04, -+ 8.29631785473724093875e-04, -+ 7.83373813047290703040e-04, -+ 7.36705786244772238558e-04, -+ 6.89654695848395987885e-04, -+ 6.42247729661416769283e-04, -+ 5.94512256815164243616e-04, -+ 5.46475811984593212202e-04, -+ 4.98166079522630966640e-04, -+ 4.49610877521255665294e-04, -+ 4.00838141809322300816e-04, -+ 3.51875909896002484617e-04, -+ 3.02752304869100116388e-04, -+ 2.53495519257492917930e-04, -+ 2.04133798866942952959e-04, -+ 1.54695426598542049934e-04, -+ 1.05208706259043055812e-04, -+ 5.57019463723481029365e-05, -+ 6.20344400145258794332e-06, -+-4.32585314102668224909e-05, -+-9.26557541683200246944e-05, -+-1.41960058418968396079e-04, -+-1.91143354193288721741e-04, -+-2.40177643395536041327e-04, -+-2.89035035725425371294e-04, -+-3.37687764526517215750e-04, -+-3.86108202550481673879e-04, -+-4.34268877629523874194e-04, -+-4.82142488247218933394e-04, -+-5.29701918999288495597e-04, -+-5.76920255935507784832e-04, -+-6.23770801774083051734e-04, -+-6.70227090979901799633e-04, -+-7.16262904698151416615e-04, -+-7.61852285534880065317e-04, -+-8.06969552176199341267e-04, -+-8.51589313837822735331e-04, -+-8.95686484537168122258e-04, -+-9.39236297179238443025e-04, -+-9.82214317449158023227e-04, -+-1.02459645750355089928e-03, -+-1.06635898945237213818e-03, -+-1.10747855862441241769e-03, -+-1.14793219660866787669e-03, -+-1.18769733406468773300e-03, -+-1.22675181329402055441e-03, -+-1.26507390056672754976e-03, -+-1.30264229819540794213e-03, -+-1.33943615635037714499e-03, -+-1.37543508460907315874e-03, -+-1.41061916323427321250e-03, -+-1.44496895417330940836e-03, -+-1.47846551177379173514e-03, -+-1.51109039320902033797e-03, -+-1.54282566860766408127e-03, -+-1.57365393088206863802e-03, -+-1.60355830525010312551e-03, -+-1.63252245844455485396e-03, -+-1.66053060760636725206e-03, -+-1.68756752885559392630e-03, -+-1.71361856553621906898e-03, -+-1.73866963613010581773e-03, -+-1.76270724183600984401e-03, -+-1.78571847380921077363e-03, -+-1.80769102005840930254e-03, -+-1.82861317199587238881e-03, -+-1.84847383063749628497e-03, -+-1.86726251244936523530e-03, -+-1.88496935483824668706e-03, -+-1.90158512128234106521e-03, -+-1.91710120610045944671e-03, -+-1.93150963885675339658e-03, -+-1.94480308839885176336e-03, -+-1.95697486652746934985e-03, -+-1.96801893129561937881e-03, -+-1.97792988993586308158e-03, -+-1.98670300141425048082e-03, -+-1.99433417860976971991e-03, -+-2.00081999011835322613e-03, -+-2.00615766168074291520e-03, -+-2.01034507723373218405e-03, -+-2.01338077958435448037e-03, -+-2.01526397070713597648e-03, -+-2.01599451166439066346e-03, -+-2.01557292214997766863e-03, -+-2.01400037965709585719e-03, -+-2.01127871827083996512e-03, -+-2.00741042708658728663e-03, -+-2.00239864825537024207e-03, -+-1.99624717465765773305e-03, -+-1.98896044720722623214e-03, -+-1.98054355178687831532e-03, -+-1.97100221581815275573e-03, -+-1.96034280446718981242e-03, -+-1.94857231648931650270e-03, -+-1.93569837971491794798e-03, -+-1.92172924617953493238e-03, -+-1.90667378690126333891e-03, -+-1.89054148630866990580e-03, -+-1.87334243632268355843e-03, -+-1.85508733009632424509e-03, -+-1.83578745541577732087e-03, -+-1.81545468776724309642e-03, -+-1.79410148307337815980e-03, -+-1.77174087010420694757e-03, -+-1.74838644256665020488e-03, -+-1.72405235087792502863e-03, -+-1.69875329362731528234e-03, -+-1.67250450873173686292e-03, -+-1.64532176429031608451e-03, -+-1.61722134914345358134e-03, -+-1.58822006314201439985e-03, -+-1.55833520713242958296e-03, -+-1.52758457266367842983e-03, -+-1.49598643142224508110e-03, -+-1.46355952440134539153e-03, -+-1.43032305081079724740e-03, -+-1.39629665673392786875e-03, -+-1.36150042353874842389e-03, -+-1.32595485604938292078e-03, -+-1.28968087048560815441e-03, -+-1.25269978217663175389e-03, -+-1.21503329305731573931e-03, -+-1.17670347895322481742e-03, -+-1.13773277666287834717e-03, -+-1.09814397084380963379e-03, -+-1.05796018071076876506e-03, -+-1.01720484655352786697e-03, -+-9.75901716082224163044e-04, -+-9.34074830608162560291e-04, -+-8.91748511068093702332e-04, -+-8.48947343900121774093e-04, -+-8.05696166779400137388e-04, -+-7.62020054221886175734e-04, -+-7.17944303064517799773e-04, -+-6.73494417830223287419e-04, -+-6.28696095985875375196e-04, -+-5.83575213102809943477e-04, -+-5.38157807926610857671e-04, -+-4.92470067366625467893e-04, -+-4.46538311412741039091e-04, -+-4.00388977988523500975e-04, -+-3.54048607749048280420e-04, -+-3.07543828832976284295e-04, -+-2.60901341576534541618e-04, -+-2.14147903198978289919e-04, -+-1.67310312467942520764e-04, -+-1.20415394353891940199e-04, -+-7.34899846812865148926e-05, -+-2.65609147871840793706e-05, -+ 2.03450038059074316498e-05, -+ 6.72009946930133205637e-05, -+ 1.13980331857172184195e-04, -+ 1.60656354898604009258e-04, -+ 2.07202484214283008147e-04, -+ 2.53592236118117483629e-04, -+ 2.99799237895086720992e-04, -+ 3.45797242778839468078e-04, -+ 3.91560144845429106229e-04, -+ 4.37061993814294241171e-04, -+ 4.82277009748485958104e-04, -+ 5.27179597645008367682e-04, -+ 5.71744361908107438623e-04, -+ 6.15946120696525068264e-04, -+ 6.59759920136990252182e-04, -+ 7.03161048395523806745e-04, -+ 7.46125049599718473056e-04, -+ 7.88627737602340720367e-04, -+ 8.30645209580345455537e-04, -+ 8.72153859460560415377e-04, -+ 9.13130391164877785494e-04, -+ 9.53551831667496553602e-04, -+ 9.93395543856891161116e-04, -+ 1.03263923919528978652e-03, -+ 1.07126099016866677127e-03, -+ 1.10923924252022128127e-03, -+ 1.14655282726058328768e-03, -+ 1.18318097244805918271e-03, -+ 1.21910331473228323099e-03, -+ 1.25429991065521308224e-03, -+ 1.28875124770248187904e-03, -+ 1.32243825509993726680e-03, -+ 1.35534231434853292934e-03, -+ 1.38744526949258163359e-03, -+ 1.41872943711487042515e-03, -+ 1.44917761605398002535e-03, -+ 1.47877309683764539099e-03, -+ 1.50749967082781347223e-03, -+ 1.53534163907186548513e-03, -+ 1.56228382085535594075e-03, -+ 1.58831156195163563510e-03, -+ 1.61341074256387195449e-03, -+ 1.63756778495518346382e-03, -+ 1.66076966076276837624e-03, -+ 1.68300389799214892943e-03, -+ 1.70425858768773869599e-03, -+ 1.72452239027620483382e-03, -+ 1.74378454157939760671e-03, -+ 1.76203485849330421936e-03, -+ 1.77926374433060529266e-03, -+ 1.79546219382350027462e-03, -+ 1.81062179778474288683e-03, -+ 1.82473474742401477189e-03, -+ 1.83779383831785469647e-03, -+ 1.84979247403080490283e-03, -+ 1.86072466938634346195e-03, -+ 1.87058505338575297924e-03, -+ 1.87936887177368445838e-03, -+ 1.88707198924914281921e-03, -+ 1.89369089132102150393e-03, -+ 1.89922268580736391258e-03, -+ 1.90366510397775167036e-03, -+ 1.90701650133855821721e-03, -+ 1.90927585806080512588e-03, -+ 1.91044277905074734968e-03, -+ 1.91051749366339122978e-03, -+ 1.90950085505942339544e-03, -+ 1.90739433920622124437e-03, -+ 1.90420004352378135701e-03, -+ 1.89992068517663812051e-03, -+ 1.89455959901305625789e-03, -+ 1.88812073515295573110e-03, -+ 1.88060865622618881600e-03, -+ 1.87202853426315300560e-03, -+ 1.86238614723965899625e-03, -+ 1.85168787527840192179e-03, -+ 1.83994069650947789270e-03, -+ 1.82715218259254900957e-03, -+ 1.81333049390355882657e-03, -+ 1.79848437438895314942e-03, -+ 1.78262314609068240993e-03, -+ 1.76575670334532712838e-03, -+ 1.74789550666099805648e-03, -+ 1.72905057627572287561e-03, -+ 1.70923348540114126287e-03, -+ 1.68845635315613591676e-03, -+ 1.66673183719381174349e-03, -+ 1.64407312602717807851e-03, -+ 1.62049393105762528852e-03, -+ 1.59600847831119999759e-03, -+ 1.57063149988747046033e-03, -+ 1.54437822512650262292e-03, -+ 1.51726437149865382714e-03, -+ 1.48930613522309045725e-03, -+ 1.46052018162035729919e-03, -+ 1.43092363520500552576e-03, -+ 1.40053406952348629723e-03, -+ 1.36936949674445118327e-03, -+ 1.33744835700646668569e-03, -+ 1.30478950753013271321e-03, -+ 1.27141221150076761358e-03, -+ 1.23733612672830939165e-03, -+ 1.20258129409077482892e-03, -+ 1.16716812576892663492e-03, -+ 1.13111739327765117337e-03, -+ 1.09445021530241268400e-03, -+ 1.05718804534711313843e-03, -+ 1.01935265920083785798e-03, -+ 9.80966142230535508365e-04, -+ 9.42050876507689177730e-04, -+ 9.02629527775573197758e-04, -+ 8.62725032265359496712e-04, -+ 8.22360583368397595437e-04, -+ 7.81559618172762574431e-04, -+ 7.40345803871171343619e-04, -+ 6.98743024048840326648e-04, -+ 6.56775364859214197573e-04, -+ 6.14467101094864410517e-04, -+ 5.71842682162310611722e-04, -+ 5.28926717968548746641e-04, -+ 4.85743964727467576921e-04, -+ 4.42319310694356789340e-04, -+ 3.98677761836690037860e-04, -+ 3.54844427449443563551e-04, -+ 3.10844505723203393555e-04, -+ 2.66703269273363180372e-04, -+ 2.22446050638747323033e-04, -+ 1.78098227757677587350e-04, -+ 1.33685209430572742549e-04, -+ 8.92324207763590298084e-05, -+ 4.47652886917426873583e-05, -+ 3.09227321650505732558e-07, -+-4.41103764515531808835e-05, -+-8.84681774910541152872e-05, -+-1.32738886852529214266e-04, -+-1.76897286187552060842e-04, -+-2.20918242094528819363e-04, -+-2.64776720409321865164e-04, -+-3.08447800427395421845e-04, -+-3.51906689049402091746e-04, -+-3.95128734842202674043e-04, -+-4.38089442007342469865e-04, -+-4.80764484249080186352e-04, -+-5.23129718534129112967e-04, -+-5.65161198735287346670e-04, -+-6.06835189151545676724e-04, -+-6.48128177896318104570e-04, -+-6.89016890147269131690e-04, -+-7.29478301249281038503e-04, -+-7.69489649664180678720e-04, -+-8.09028449758908115366e-04, -+-8.48072504425961999630e-04, -+-8.86599917528026388626e-04, -+-9.24589106160850367731e-04, -+-9.62018812726749862618e-04, -+-9.98868116812330619769e-04, -+-1.03511644686372960081e-03, -+-1.07074359165286784289e-03, -+-1.10572971152834206160e-03, -+-1.14005534944471237715e-03, -+-1.17370144176403299122e-03, -+-1.20664932882368503703e-03, -+-1.23888076526462546922e-03, -+-1.27037793011433868158e-03, -+-1.30112343661913792969e-03, -+-1.33110034181987751598e-03, -+-1.36029215586637268476e-03, -+-1.38868285106535536630e-03, -+-1.41625687065657750174e-03, -+-1.44299913731265943770e-03, -+-1.46889506135814513696e-03, -+-1.49393054870271117275e-03, -+-1.51809200848501517356e-03, -+-1.54136636042246982434e-03, -+-1.56374104186323185060e-03, -+-1.58520401453656292236e-03, -+-1.60574377099796661295e-03, -+-1.62534934076566579299e-03, -+-1.64401029614518693484e-03, -+-1.66171675773892622320e-03, -+-1.67845939963788895466e-03, -+-1.69422945429279826236e-03, -+-1.70901871706225839433e-03, -+-1.72281955043516879847e-03, -+-1.73562488792599364622e-03, -+-1.74742823764018669758e-03, -+-1.75822368550844964838e-03, -+-1.76800589818810072879e-03, -+-1.77677012563024231892e-03, -+-1.78451220331139900031e-03, -+-1.79122855412879207482e-03, -+-1.79691618995835998736e-03, -+-1.80157271287491316247e-03, -+-1.80519631603399109167e-03, -+-1.80778578421531151664e-03, -+-1.80934049402758445960e-03, -+-1.80986041377503045595e-03, -+-1.80934610298588618299e-03, -+-1.80779871160341876896e-03, -+-1.80521997884027364349e-03, -+-1.80161223169698209157e-03, -+-1.79697838314586038136e-03, -+-1.79132192998154664808e-03, -+-1.78464695033966652855e-03, -+-1.77695810088541257706e-03, -+-1.76826061367380709712e-03, -+-1.75856029268379684440e-03, -+-1.74786351002833607871e-03, -+-1.73617720184306720613e-03, -+-1.72350886385598295499e-03, -+-1.70986654664103516175e-03, -+-1.69525885055866825345e-03, -+-1.67969492038625377826e-03, -+-1.66318443964190258721e-03, -+-1.64573762460525812104e-03, -+-1.62736521803862185451e-03, -+-1.60807848261251156753e-03, -+-1.58788919403957031612e-03, -+-1.56680963392096320175e-03, -+-1.54485258230964710331e-03, -+-1.52203130999494277119e-03, -+-1.49835957051309000103e-03, -+-1.47385159188855594317e-03, -+-1.44852206811105200211e-03, -+-1.42238615035335702781e-03, -+-1.39545943793505230687e-03, -+-1.36775796903791223985e-03, -+-1.33929821117795126197e-03, -+-1.31009705144011874209e-03, -+-1.28017178648149091390e-03, -+-1.24954011230838865631e-03, -+-1.21822011383393023938e-03, -+-1.18623025422220701106e-03, -+-1.15358936402481875548e-03, -+-1.12031663011664538339e-03, -+-1.08643158443716956497e-03, -+-1.05195409254393249660e-03, -+-1.01690434198485049264e-03, -+-9.81302830496187097550e-04, -+-9.45170354033052825121e-04, -+-9.08527994639429640512e-04, -+-8.71397108164778015985e-04, -+-8.33799311834413085960e-04, -+-7.95756471680627718197e-04, -+-7.57290689842498644137e-04, -+-7.18424291740831638675e-04, -+-6.79179813136611995432e-04, -+-6.39579987079505734443e-04, -+-5.99647730754900086352e-04, -+-5.59406132236475598166e-04, -+-5.18878437151933970262e-04, -+-4.78088035270234697639e-04, -+-4.37058447017129952060e-04, -+-3.95813309927481478661e-04, -+-3.54376365041849988782e-04, -+-3.12771443255252100824e-04, -+-2.71022451625898674193e-04, -+-2.29153359651793514821e-04, -+-1.87188185523051535668e-04, -+-1.45150982357815703074e-04, -+-1.03065824429653753224e-04, -+-6.09567933943611181980e-05, -+-1.88479645237432815287e-05, -+ 2.32366070450612883841e-05, -+ 6.52729000375716606440e-05, -+ 1.07236940739442618243e-04, -+ 1.49104816654926491124e-04, -+ 1.90852690119197040226e-04, -+ 2.32456811856789096653e-04, -+ 2.73893534477760703088e-04, -+ 3.15139325904901243872e-04, -+ 3.56170782723636393866e-04, -+ 3.96964643447348004834e-04, -+ 4.37497801690561933553e-04, -+ 4.77747319242539513363e-04, -+ 5.17690439033898983090e-04, -+ 5.57304597988927475152e-04, -+ 5.96567439756349820155e-04, -+ 6.35456827311364227072e-04, -+ 6.73950855421827322786e-04, -+ 7.12027862971859829694e-04, -+ 7.49666445135031877037e-04, -+ 7.86845465391861000233e-04, -+ 8.23544067383306889127e-04, -+ 8.59741686594572016369e-04, -+ 8.95418061862311427494e-04, -+ 9.30553246699131696683e-04, -+ 9.65127620428410772438e-04, -+ 9.99121899124090018587e-04, -+ 1.03251714634870848247e-03, -+ 1.06529478368399947198e-03, -+ 1.09743660104794104639e-03, -+ 1.12892476679308227140e-03, -+ 1.15974183757998469332e-03, -+ 1.18987076802038013908e-03, -+ 1.21929492008520171109e-03, -+ 1.24799807227183364583e-03, -+ 1.27596442852571370294e-03, -+ 1.30317862691138467227e-03, -+ 1.32962574802824510904e-03, -+ 1.35529132316640921890e-03, -+ 1.38016134219821656921e-03, -+ 1.40422226120109406612e-03, -+ 1.42746100980768492357e-03, -+ 1.44986499827917236088e-03, -+ 1.47142212429823100381e-03, -+ 1.49212077947745262729e-03, -+ 1.51194985558042080918e-03, -+ 1.53089875045162937886e-03, -+ 1.54895737365219089698e-03, -+ 1.56611615179862813038e-03, -+ 1.58236603360162059878e-03, -+ 1.59769849460209630194e-03, -+ 1.61210554160250824594e-03, -+ 1.62557971679072794415e-03, -+ 1.63811410155455141995e-03, -+ 1.64970231998493792151e-03, -+ 1.66033854206613972274e-03, -+ 1.67001748655128297305e-03, -+ 1.67873442352191011920e-03, -+ 1.68648517663034331823e-03, -+ 1.69326612502385489591e-03, -+ 1.69907420494976057514e-03, -+ 1.70390691104087862832e-03, -+ 1.70776229728072394785e-03, -+ 1.71063897764836807952e-03, -+ 1.71253612644269893883e-03, -+ 1.71345347828618104098e-03, -+ 1.71339132780851089409e-03, -+ 1.71235052901041605485e-03, -+ 1.71033249430839581935e-03, -+ 1.70733919326115121499e-03, -+ 1.70337315097866446277e-03, -+ 1.69843744621518731933e-03, -+ 1.69253570914738513120e-03, -+ 1.68567211883928003494e-03, -+ 1.67785140039562329257e-03, -+ 1.66907882180561645095e-03, -+ 1.65936019047902743109e-03, -+ 1.64870184947697967330e-03, -+ 1.63711067343976380412e-03, -+ 1.62459406421430947211e-03, -+ 1.61115994618396237217e-03, -+ 1.59681676130369741735e-03, -+ 1.58157346384365333700e-03, -+ 1.56543951484419598813e-03, -+ 1.54842487628618539174e-03, -+ 1.53054000497979212497e-03, -+ 1.51179584617556041562e-03, -+ 1.49220382690190903063e-03, -+ 1.47177584903268165312e-03, -+ 1.45052428208925355928e-03, -+ 1.42846195578139154199e-03, -+ 1.40560215229139080610e-03, -+ 1.38195859830608975584e-03, -+ 1.35754545680155853417e-03, -+ 1.33237731858531225151e-03, -+ 1.30646919360115246027e-03, -+ 1.27983650200173999789e-03, -+ 1.25249506499428768340e-03, -+ 1.22446109546453757271e-03, -+ 1.19575118838507522302e-03, -+ 1.16638231101316865689e-03, -+ 1.13637179288388632040e-03, -+ 1.10573731560490210422e-03, -+ 1.07449690245847175561e-03, -+ 1.04266890781677537894e-03, -+ 1.01027200637724160967e-03, -+ 9.77325182223491746580e-04, -+ 9.43847717718836014267e-04, -+ 9.09859182238561756129e-04, -+ 8.75379420747673811856e-04, -+ 8.40428542230697460044e-04, -+ 8.05026907980306420144e-04, -+ 7.69195119751593810696e-04, -+ 7.32954007788833667922e-04, -+ 6.96324618731728513937e-04, -+ 6.59328203408161448926e-04, -+ 6.21986204520240414974e-04, -+ 5.84320244231672147536e-04, -+ 5.46352111662109520517e-04, -+ 5.08103750297240336353e-04, -+ 4.69597245320941603965e-04, -+ 4.30854810877143471967e-04, -+ 3.91898777268710394022e-04, -+ 3.52751578100453573074e-04, -+ 3.13435737374358550089e-04, -+ 2.73973856543509894194e-04, -+ 2.34388601532805235282e-04, -+ 1.94702689733898895181e-04, -+ 1.54938876981224293557e-04, -+ 1.15119944517208389599e-04, -+ 7.52686859541390425104e-05, -+ 3.54078942394808599795e-05, -+-4.43965136725644293991e-06, -+-4.42511982989445055948e-05, -+-8.40040336590952227153e-05, -+-1.23675497166556415483e-04, -+-1.63242994059274422816e-04, -+-2.02684007949782501144e-04, -+-2.41976113625108971150e-04, -+-2.81096989783838162574e-04, -+-3.20024431703046653274e-04, -+-3.58736363828217243860e-04, -+-3.97210852278301535575e-04, -+-4.35426117259783847756e-04, -+-4.73360545382079051305e-04, -+-5.10992701867309432294e-04, -+-5.48301342648169556804e-04, -+-5.85265426346414513459e-04, -+-6.21864126125226549316e-04, -+-6.58076841409443590199e-04, -+-6.93883209466395465582e-04, -+-7.29263116841149562630e-04, -+-7.64196710639690078223e-04, -+-7.98664409653720487083e-04, -+-8.32646915320844871987e-04, -+-8.66125222514040646153e-04, -+-8.99080630154340944109e-04, -+-9.31494751640883481870e-04, -+-9.63349525092406142567e-04, -+-9.94627223394778684981e-04, -+-1.02531046404839951310e-03, -+-1.05538221881074458820e-03, -+-1.08482582312822528441e-03, -+-1.11362498535213291090e-03, -+-1.14176379573408177427e-03, -+-1.16922673519527877718e-03, -+-1.19599868386546836010e-03, -+-1.22206492938624691758e-03, -+-1.24741117497479086888e-03, -+-1.27202354724320165595e-03, -+-1.29588860376930693416e-03, -+-1.31899334041485176428e-03, -+-1.34132519838702510620e-03, -+-1.36287207103959304329e-03, -+-1.38362231040987894090e-03, -+-1.40356473348816814667e-03, -+-1.42268862821608036220e-03, -+-1.44098375921079607451e-03, -+-1.45844037321212166396e-03, -+-1.47504920424929150333e-03, -+-1.49080147852505740143e-03, -+-1.50568891901449236279e-03, -+-1.51970374977587058263e-03, -+-1.53283869997163850300e-03, -+-1.54508700759743169105e-03, -+-1.55644242291698388023e-03, -+-1.56689921160158636589e-03, -+-1.57645215757227954816e-03, -+-1.58509656554349596252e-03, -+-1.59282826326696629569e-03, -+-1.59964360347482673595e-03, -+-1.60553946552108848557e-03, -+-1.61051325672077034167e-03, -+-1.61456291338620840613e-03, -+-1.61768690156018470419e-03, -+-1.61988421744570839506e-03, -+-1.62115438753249706261e-03, -+-1.62149746842027214430e-03, -+-1.62091404633929480651e-03, -+-1.61940523636864598667e-03, -+-1.61697268135293863688e-03, -+-1.61361855051833538548e-03, -+-1.60934553778894714506e-03, -+-1.60415685980480290408e-03, -+-1.59805625364277783043e-03, -+-1.59104797424202554224e-03, -+-1.58313679153566032841e-03, -+-1.57432798729054113616e-03, -+-1.56462735165729103538e-03, -+-1.55404117943255706651e-03, -+-1.54257626603623507200e-03, -+-1.53023990320586564598e-03, -+-1.51703987441107932509e-03, -+-1.50298444999091796934e-03, -+-1.48808238201701193738e-03, -+-1.47234289888582359565e-03, -+-1.45577569964323665606e-03, -+-1.43839094804500198903e-03, -+-1.42019926635660867151e-03, -+-1.40121172889639514399e-03, -+-1.38143985532579059369e-03, -+-1.36089560369062070010e-03, -+-1.33959136321799648049e-03, -+-1.31753994687265748795e-03, -+-1.29475458367754288694e-03, -+-1.27124891080319826590e-03, -+-1.24703696543038513624e-03, -+-1.22213317639110834699e-03, -+-1.19655235559304484218e-03, -+-1.17030968923203648052e-03, -+-1.14342072879827219220e-03, -+-1.11590138188130184350e-03, -+-1.08776790277930086870e-03, -+-1.05903688291816215454e-03, -+-1.02972524108603069419e-03, -+-9.99850213489021427335e-04, -+-9.69429343633939504844e-04, -+-9.38480472043964680448e-04, -+-9.07021725813329186133e-04, -+-8.75071508006883031112e-04, -+-8.42648486911279294594e-04, -+-8.09771585143337466368e-04, -+-7.76459968622407611070e-04, -+-7.42733035413201104179e-04, -+-7.08610404445038041289e-04, -+-6.74111904114616314332e-04, -+-6.39257560778936587825e-04, -+-6.04067587144468801964e-04, -+-5.68562370559859918927e-04, -+-5.32762461218706014771e-04, -+-4.96688560279258763987e-04, -+-4.60361507907912782377e-04, -+-4.23802271253376780860e-04, -+-3.87031932358470730920e-04, -+-3.50071676016493139785e-04, -+-3.12942777579159074532e-04, -+-2.75666590723110279098e-04, -+-2.38264535182076194354e-04, -+-2.00758084451451004676e-04, -+-1.63168753473010485957e-04, -+-1.25518086305888461329e-04, -+-8.78276437918047763126e-05, -+-5.01189912206633324926e-05, -+-1.24136860045527507159e-05, -+ 2.52667346337536352944e-05, -+ 6.29007659498319457100e-05, -+ 1.00466947938114190518e-04, -+ 1.37943877556209900086e-04, -+ 1.75310220906359231921e-04, -+ 2.12544725367042178004e-04, -+ 2.49626231667856310695e-04, -+ 2.86533685900810760391e-04, -+ 3.23246151461219666419e-04, -+ 3.59742820911436455861e-04, -+ 3.96003027760712372068e-04, -+ 4.32006258154472920323e-04, -+ 4.67732162466665663501e-04, -+ 5.03160566788037619604e-04, -+ 5.38271484304469029561e-04, -+ 5.73045126558938025356e-04, -+ 6.07461914590199476491e-04, -+ 6.41502489942463185145e-04, -+ 6.75147725539870118862e-04, -+ 7.08378736419115317274e-04, -+ 7.41176890315008965633e-04, -+ 7.73523818092431607665e-04, -+ 8.05401424019106036527e-04, -+ 8.36791895873423112462e-04, -+ 8.67677714881635517297e-04, -+ 8.98041665478958536263e-04, -+ 9.27866844889067626453e-04, -+ 9.57136672516743498666e-04, -+ 9.85834899148405139485e-04, -+ 1.01394561595543404760e-03, -+ 1.04145326329548363296e-03, -+ 1.06834263930647441546e-03, -+ 1.09459890828899372543e-03, -+ 1.12020760887248218077e-03, -+ 1.14515466196026915839e-03, -+ 1.16942637844957234711e-03, -+ 1.19300946672199316770e-03, -+ 1.21589103990064808375e-03, -+ 1.23805862286953697812e-03, -+ 1.25950015905194477768e-03, -+ 1.28020401694373142133e-03, -+ 1.30015899639822005152e-03, -+ 1.31935433465907368637e-03, -+ 1.33777971213847393650e-03, -+ 1.35542525793661992536e-03, -+ 1.37228155510049436815e-03, -+ 1.38833964561861015856e-03, -+ 1.40359103514923078820e-03, -+ 1.41802769747961950574e-03, -+ 1.43164207871396926761e-03, -+ 1.44442710118785071390e-03, -+ 1.45637616710717282889e-03, -+ 1.46748316190982897207e-03, -+ 1.47774245734831524007e-03, -+ 1.48714891429181411860e-03, -+ 1.49569788524642525128e-03, -+ 1.50338521659217202661e-03, -+ 1.51020725053600747730e-03, -+ 1.51616082677973940986e-03, -+ 1.52124328390220494439e-03, -+ 1.52545246045525904888e-03, -+ 1.52878669577304190583e-03, -+ 1.53124483049437549141e-03, -+ 1.53282620679826551459e-03, -+ 1.53353066835256834737e-03, -+ 1.53335855997613302801e-03, -+ 1.53231072701479021855e-03, -+ 1.53038851443190564161e-03, -+ 1.52759376561413247157e-03, -+ 1.52392882089336643460e-03, -+ 1.51939651578598348275e-03, -+ 1.51400017895056589190e-03, -+ 1.50774362986558999739e-03, -+ 1.50063117622853013297e-03, -+ 1.49266761107828566796e-03, -+ 1.48385820964260146428e-03, -+ 1.47420872591265969889e-03, -+ 1.46372538894702294843e-03, -+ 1.45241489890715028306e-03, -+ 1.44028442282717193852e-03, -+ 1.42734159012037307990e-03, -+ 1.41359448782537428478e-03, -+ 1.39905165559475546354e-03, -+ 1.38372208042934524870e-03, -+ 1.36761519116132632817e-03, -+ 1.35074085268957954850e-03, -+ 1.33310935997071780372e-03, -+ 1.31473143176951009180e-03, -+ 1.29561820417240587851e-03, -+ 1.27578122386814139279e-03, -+ 1.25523244119940383980e-03, -+ 1.23398420298978994322e-03, -+ 1.21204924515017141255e-03, -+ 1.18944068506927815715e-03, -+ 1.16617201379247414916e-03, -+ 1.14225708799397369063e-03, -+ 1.11771012174662520873e-03, -+ 1.09254567809480241866e-03, -+ 1.06677866043477544145e-03, -+ 1.04042430370825892544e-03, -+ 1.01349816541371835939e-03, -+ 9.86016116441160682393e-04, -+ 9.57994331735642526242e-04, -+ 9.29449280794978792072e-04, -+ 9.00397718007248429838e-04, -+ 8.70856672833736898155e-04, -+ 8.40843439843083260109e-04, -+ 8.10375568602425999827e-04, -+ 7.79470853431471315254e-04, -+ 7.48147323025479091436e-04, -+ 7.16423229952991972615e-04, -+ 6.84317040034933634675e-04, -+ 6.51847421610750755311e-04, -+ 6.19033234697776140604e-04, -+ 5.85893520050684464551e-04, -+ 5.52447488126856715678e-04, -+ 5.18714507964034747881e-04, -+ 4.84714095977265707355e-04, -+ 4.50465904680799719868e-04, -+ 4.15989711342059980889e-04, -+ 3.81305406573980180604e-04, -+ 3.46432982872289069957e-04, -+ 3.11392523104614979499e-04, -+ 2.76204188957184101297e-04, -+ 2.40888209347176124927e-04, -+ 2.05464868805964193327e-04, -+ 1.69954495840752130374e-04, -+ 1.34377451281002371951e-04, -+ 9.87541166164100474301e-05, -+ 6.31048823327933465369e-05, -+ 2.74501362534655310964e-05, -+-8.18974810873998083655e-06, -+-4.37944231806596304514e-05, -+-7.93435789334627901382e-05, -+-1.14816954455838874283e-04, -+-1.50194349489415440680e-04, -+-1.85455635919215376531e-04, -+-2.20580769213464333118e-04, -+-2.55549799805626501933e-04, -+-2.90342884412502183315e-04, -+-3.24940297281641648271e-04, -+-3.59322441362583172488e-04, -+-3.93469859394135197499e-04, -+-4.27363244902898627587e-04, -+-4.60983453105939474694e-04, -+-4.94311511711763339541e-04, -+-5.27328631613451729448e-04, -+-5.60016217467949450198e-04, -+-5.92355878155555572520e-04, -+-6.24329437113732110647e-04, -+-6.55918942539445706461e-04, -+-6.87106677454311985491e-04, -+-7.17875169626881314694e-04, -+-7.48207201346719435846e-04, -+-7.78085819044304792189e-04, -+-8.07494342752076792701e-04, -+-8.36416375400828135574e-04, -+-8.64835811946538645517e-04, -+-8.92736848322267452678e-04, -+-9.20103990210890628799e-04, -+-9.46922061632605917975e-04, -+-9.73176213343664533485e-04, -+-9.98851931040956823177e-04, -+-1.02393504336819934561e-03, -+-1.04841172971923139896e-03, -+-1.07226852783420443203e-03, -+-1.09549234118443920144e-03, -+-1.11807044614193923544e-03, -+-1.13999049892964587558e-03, -+-1.16124054234865384944e-03, -+-1.18180901227872168710e-03, -+-1.20168474394853771157e-03, -+-1.22085697797251154818e-03, -+-1.23931536615045907561e-03, -+-1.25704997702758545543e-03, -+-1.27405130121131457410e-03, -+-1.29031025644257271376e-03, -+-1.30581819241839158958e-03, -+-1.32056689536371330701e-03, -+-1.33454859234959002240e-03, -+-1.34775595535592540575e-03, -+-1.36018210507637331112e-03, -+-1.37182061446355658269e-03, -+-1.38266551201276610521e-03, -+-1.39271128478253266095e-03, -+-1.40195288115051316068e-03, -+-1.41038571330337893055e-03, -+-1.41800565945951256505e-03, -+-1.42480906582346297101e-03, -+-1.43079274827126803893e-03, -+-1.43595399376592503145e-03, -+-1.44029056150241801561e-03, -+-1.44380068378189055887e-03, -+-1.44648306661469805943e-03, -+-1.44833689005223324210e-03, -+-1.44936180824753674604e-03, -+-1.44955794924493913504e-03, -+-1.44892591449903443759e-03, -+-1.44746677812355745846e-03, -+-1.44518208587075661954e-03, -+-1.44207385384213272739e-03, -+-1.43814456693148930849e-03, -+-1.43339717700140213338e-03, -+-1.42783510079440463525e-03, -+-1.42146221758030649220e-03, -+-1.41428286654118624127e-03, -+-1.40630184389584447259e-03, -+-1.39752439976549721300e-03, -+-1.38795623478277815703e-03, -+-1.37760349644625219347e-03, -+-1.36647277522266587767e-03, -+-1.35457110039932790077e-03, -+-1.34190593568940877423e-03, -+-1.32848517459267919869e-03, -+-1.31431713551467539529e-03, -+-1.29941055664714501944e-03, -+-1.28377459061317523298e-03, -+-1.26741879887994307423e-03, -+-1.25035314594268138870e-03, -+-1.23258799328333345374e-03, -+-1.21413409310764655244e-03, -+-1.19500258186405750038e-03, -+-1.17520497354900595698e-03, -+-1.15475315280194222242e-03, -+-1.13365936779458078426e-03, -+-1.11193622291853085743e-03, -+-1.08959667127568366092e-03, -+-1.06665400697560715411e-03, -+-1.04312185724514980105e-03, -+-1.01901417435390105257e-03, -+-9.94345227361283657413e-04, -+-9.69129593689562135808e-04, -+-9.43382150527953696438e-04, -+-9.17118066072678981768e-04, -+-8.90352790608596130796e-04, -+-8.63102047436990239826e-04, -+-8.35381823655337134304e-04, -+-8.07208360794198893050e-04, -+-7.78598145316998046898e-04, -+-7.49567898987517377586e-04, -+-7.20134569111909820377e-04, -+-6.90315318659743713467e-04, -+-6.60127516270525181372e-04, -+-6.29588726151278908240e-04, -+-5.98716697871097070296e-04, -+-5.67529356058555788274e-04, -+-5.36044790008002544103e-04, -+-5.04281243200707597792e-04, -+-4.72257102746954785574e-04, -+-4.39990888755171366542e-04, -+-4.07501243634276436468e-04, -+-3.74806921335187493566e-04, -+-3.41926776538259847692e-04, -+-3.08879753792126179272e-04, -+-2.75684876610755174881e-04, -+-2.42361236534725988821e-04, -+-2.08927982163283266397e-04, -+-1.75404308162909107092e-04, -+-1.41809444259267161117e-04, -+-1.08162644218829444537e-04, -+-7.44831748259327543465e-05, -+-4.07903048621291604812e-05, -+-7.10329409388432176530e-06, -+ 2.65586177250463047000e-05, -+ 6.01762218302914552804e-05, -+ 9.37303513963725428056e-05, -+ 1.27201892452491753700e-04, -+ 1.60571794759468988462e-04, -+ 1.93821082639647593359e-04, -+ 2.26930865755815396869e-04, -+ 2.59882349831586946780e-04, -+ 2.92656847307690018770e-04, -+ 3.25235787928080961190e-04, -+ 3.57600729249660839303e-04, -+ 3.89733367070243196494e-04, -+ 4.21615545768098812836e-04, -+ 4.53229268547830762767e-04, -+ 4.84556707586572316029e-04, -+ 5.15580214074757778309e-04, -+ 5.46282328146297608759e-04, -+ 5.76645788691256379679e-04, -+ 6.06653543047546025234e-04, -+ 6.36288756564360792091e-04, -+ 6.65534822032997838703e-04, -+ 6.94375368979479354152e-04, -+ 7.22794272813854533910e-04, -+ 7.50775663831016056536e-04, -+ 7.78303936058092520403e-04, -+ 8.05363755943419535807e-04, -+ 8.31940070882321368144e-04, -+ 8.58018117574883202973e-04, -+ 8.83583430211330928851e-04, -+ 9.08621848479962369513e-04, -+ 9.33119525393878300641e-04, -+ 9.57062934931689960998e-04, -+ 9.80438879488230432754e-04, -+ 1.00323449713107977488e-03, -+ 1.02543726865899926387e-03, -+ 1.04703502445835567626e-03, -+ 1.06801595115381007736e-03, -+ 1.08836859804968565969e-03, -+ 1.10808188335835252139e-03, -+ 1.12714510021262159095e-03, -+ 1.14554792245836578428e-03, -+ 1.16328041022489597940e-03, -+ 1.18033301526926739412e-03, -+ 1.19669658609257542788e-03, -+ 1.21236237282488557888e-03, -+ 1.22732203187633261143e-03, -+ 1.24156763035219172911e-03, -+ 1.25509165022920821282e-03, -+ 1.26788699229131874430e-03, -+ 1.27994697982256044888e-03, -+ 1.29126536205536050946e-03, -+ 1.30183631737235691941e-03, -+ 1.31165445626020235083e-03, -+ 1.32071482401390893208e-03, -+ 1.32901290319023448333e-03, -+ 1.33654461580914787205e-03, -+ 1.34330632530221187430e-03, -+ 1.34929483820697367936e-03, -+ 1.35450740560668671242e-03, -+ 1.35894172431470653187e-03, -+ 1.36259593780313340884e-03, -+ 1.36546863687537654505e-03, -+ 1.36755886008250635531e-03, -+ 1.36886609388332716047e-03, -+ 1.36939027254837260295e-03, -+ 1.36913177780802522952e-03, -+ 1.36809143824524986725e-03, -+ 1.36627052843346185988e-03, -+ 1.36367076782027457811e-03, -+ 1.36029431935798012128e-03, -+ 1.35614378788172988514e-03, -+ 1.35122221823664079472e-03, -+ 1.34553309315501787302e-03, -+ 1.33908033088521731709e-03, -+ 1.33186828257363392043e-03, -+ 1.32390172940159678815e-03, -+ 1.31518587947901410308e-03, -+ 1.30572636449661312261e-03, -+ 1.29552923613923372595e-03, -+ 1.28460096226200824743e-03, -+ 1.27294842283218667331e-03, -+ 1.26057890563882179363e-03, -+ 1.24750010177327374725e-03, -+ 1.23372010088306036796e-03, -+ 1.21924738620211555243e-03, -+ 1.20409082936042593007e-03, -+ 1.18825968497621972837e-03, -+ 1.17176358503399751995e-03, -+ 1.15461253305178279151e-03, -+ 1.13681689804116217886e-03, -+ 1.11838740826359175386e-03, -+ 1.09933514478704010865e-03, -+ 1.07967153484642012021e-03, -+ 1.05940834501207096011e-03, -+ 1.03855767417023879713e-03, -+ 1.01713194631976918542e-03, -+ 9.95143903189260560158e-04, -+ 9.72606596679090784803e-04, -+ 9.49533381132751461845e-04, -+ 9.25937905442090168628e-04, -+ 9.01834104991060562725e-04, -+ 8.77236193442972891042e-04, -+ 8.52158654375306323994e-04, -+ 8.26616232768399242931e-04, -+ 8.00623926351481181481e-04, -+ 7.74196976812098437357e-04, -+ 7.47350860873750573281e-04, -+ 7.20101281246932219647e-04, -+ 6.92464157459100611118e-04, -+ 6.64455616568401037821e-04, -+ 6.36091983767215129672e-04, -+ 6.07389772880511497576e-04, -+ 5.78365676764722234753e-04, -+ 5.49036557612754723412e-04, -+ 5.19419437170334677249e-04, -+ 4.89531486870367453512e-04, -+ 4.59390017889853828105e-04, -+ 4.29012471135610442413e-04, -+ 3.98416407164879030761e-04, -+ 3.67619496046182284588e-04, -+ 3.36639507166480267224e-04, -+ 3.05494298990473505794e-04, -+ 2.74201808777935912304e-04, -+ 2.42780042265004216643e-04, -+ 2.11247063315343980641e-04, -+ 1.79620983547136846585e-04, -+ 1.47919951941878261405e-04, -+ 1.16162144440711673481e-04, -+ 8.43657535348246083538e-05, -+ 5.25489778551051491483e-05, -+ 2.07300117675779430298e-05, -+-1.10729650196668325771e-05, -+-4.28417978320822792019e-05, -+-7.45583673808965783410e-05, -+-1.06204600086071425293e-04, -+-1.37762478364149087246e-04, -+-1.69214050874914927148e-04, -+-2.00541442721614891851e-04, -+-2.31726865598118244574e-04, -+-2.62752627878274269604e-04, -+-2.93601144640412165671e-04, -+-3.24254947622835021804e-04, -+-3.54696695103594577137e-04, -+-3.84909181699200184275e-04, -+-4.14875348077196936039e-04, -+-4.44578290576414924141e-04, -+-4.74001270730014352076e-04, -+-5.03127724685752076780e-04, -+-5.31941272518206861690e-04, -+-5.60425727427743720910e-04, -+-5.88565104821016545078e-04, -+-6.16343631268131183359e-04, -+-6.43745753330938032602e-04, -+-6.70756146258231328826e-04, -+-6.97359722542432612299e-04, -+-7.23541640333268576586e-04, -+-7.49287311703654272145e-04, -+-7.74582410763238315282e-04, -+-7.99412881615075860547e-04, -+-8.23764946151039185139e-04, -+-8.47625111681623221935e-04, -+-8.70980178395970995424e-04, -+-8.93817246647941095888e-04, -+-9.16123724064377706680e-04, -+-9.37887332471280203011e-04, -+-9.59096114634606271634e-04, -+-9.79738440811607448275e-04, -+-9.99803015109290834847e-04, -+-1.01927888164651272128e-03, -+-1.03815543051633853155e-03, -+-1.05642240354548912901e-03, -+-1.07406989984759745557e-03, -+-1.09108838116762723279e-03, -+-1.10746867701414018585e-03, -+-1.12320198957698577993e-03, -+-1.13827989842765417428e-03, -+-1.15269436499997502028e-03, -+-1.16643773684832734866e-03, -+-1.17950275168172556868e-03, -+-1.19188254117136706138e-03, -+-1.20357063452954798910e-03, -+-1.21456096185834725582e-03, -+-1.22484785726622159678e-03, -+-1.23442606175099434812e-03, -+-1.24329072584775926144e-03, -+-1.25143741204040113979e-03, -+-1.25886209693559965317e-03, -+-1.26556117319820459269e-03, -+-1.27153145124719456523e-03, -+-1.27677016071131685555e-03, -+-1.28127495164393639428e-03, -+-1.28504389549651746975e-03, -+-1.28807548585040771913e-03, -+-1.29036863890675851559e-03, -+-1.29192269373445381593e-03, -+-1.29273741227616803182e-03, -+-1.29281297911274461153e-03, -+-1.29215000098622341193e-03, -+-1.29074950608205050485e-03, -+-1.28861294307102769788e-03, -+-1.28574217991181470426e-03, -+-1.28213950241485154062e-03, -+-1.27780761256874805798e-03, -+-1.27274962663027619951e-03, -+-1.26696907297930137261e-03, -+-1.26046988974006066338e-03, -+-1.25325642217039056117e-03, -+-1.24533341982049493464e-03, -+-1.23670603346324884178e-03, -+-1.22737981179783643172e-03, -+-1.21736069792890478670e-03, -+-1.20665502562341490217e-03, -+-1.19526951534740743209e-03, -+-1.18321127008547502014e-03, -+-1.17048777094514431553e-03, -+-1.15710687254899267061e-03, -+-1.14307679821747196908e-03, -+-1.12840613494519497600e-03, -+-1.11310382817380736260e-03, -+-1.09717917636461301072e-03, -+-1.08064182537422016558e-03, -+-1.06350176263660047178e-03, -+-1.04576931115505939590e-03, -+-1.02745512330771390092e-03, -+-1.00857017447020984660e-03, -+-9.89125756459348273036e-04, -+-9.69133470801857087144e-04, -+-9.48605221831876478482e-04, -+-9.27553209621573911299e-04, -+-9.05989922748946536341e-04, -+-8.83928130907113245029e-04, -+-8.61380877359472856523e-04, -+-8.38361471245136369995e-04, -+-8.14883479739194086997e-04, -+-7.90960720072537894904e-04, -+-7.66607251415539741463e-04, -+-7.41837366630958413780e-04, -+-7.16665583900111865384e-04, -+-6.91106638228288503237e-04, -+-6.65175472833141076361e-04, -+-6.38887230421945938666e-04, -+-6.12257244362626436643e-04, -+-5.85301029753312320944e-04, -+-5.58034274396206606862e-04, -+-5.30472829680567778236e-04, -+-5.02632701380270412693e-04, -+-4.74530040371252698900e-04, -+-4.46181133274236403283e-04, -+-4.17602393028139700758e-04, -+-3.88810349399469656114e-04, -+-3.59821639433645487551e-04, -+-3.30652997853107073409e-04, -+-3.01321247408244021881e-04, -+-2.71843289186502834551e-04, -+-2.42236092885274642951e-04, -+-2.12516687054165319707e-04, -+-1.82702149312243965380e-04, -+-1.52809596545888838484e-04, -+-1.22856175092848034355e-04, -+-9.28590509181383036126e-05, -+-6.28353997874044387486e-05, -+-3.28023974433953014970e-05, -+-2.77720979095154411141e-06, -+ 2.72230169033535440140e-05, -+ 5.71811657920477271538e-05, -+ 8.70801592019578094960e-05, -+ 1.16902968358433966434e-04, -+ 1.46632623073032026736e-04, -+ 1.76252221389186882524e-04, -+ 2.05744939180186014712e-04, -+ 2.35094039694530468169e-04, -+ 2.64282883042567088867e-04, -+ 2.93294935619551385558e-04, -+ 3.22113779459532194229e-04, -+ 3.50723121515214011305e-04, -+ 3.79106802857572401221e-04, -+ 4.07248807791192634405e-04, -+ 4.35133272879688717035e-04, -+ 4.62744495875839806538e-04, -+ 4.90066944551884237959e-04, -+ 5.17085265424790572163e-04, -+ 5.43784292371653644321e-04, -+ 5.70149055130390425110e-04, -+ 5.96164787680977456552e-04, -+ 6.21816936502533586587e-04, -+ 6.47091168701626482176e-04, -+ 6.71973380007443560867e-04, -+ 6.96449702628909074476e-04, -+ 7.20506512970012593690e-04, -+ 7.44130439198579488221e-04, -+ 7.67308368664491478525e-04, -+ 7.90027455163207908972e-04, -+ 8.12275126040571966018e-04, -+ 8.34039089134997737793e-04, -+ 8.55307339553189088961e-04, -+ 8.76068166275680644713e-04, -+ 8.96310158588609247332e-04, -+ 9.16022212337969966855e-04, -+ 9.35193536003619163739e-04, -+ 9.53813656588502287864e-04, -+ 9.71872425321206783247e-04, -+ 9.89360023167912576089e-04, -+ 1.00626696615104373536e-03, -+ 1.02258411047174220705e-03, -+ 1.03830265743327931904e-03, -+ 1.05341415816306632411e-03, -+ 1.06791051813036243917e-03, -+ 1.08178400145754450255e-03, -+ 1.09502723502257035167e-03, -+ 1.10763321235048616507e-03, -+ 1.11959529729188916186e-03, -+ 1.13090722748666861440e-03, -+ 1.14156311761065294014e-03, -+ 1.15155746240435427445e-03, -+ 1.16088513948151006439e-03, -+ 1.16954141191641532681e-03, -+ 1.17752193060865497330e-03, -+ 1.18482273642408174330e-03, -+ 1.19144026211101582494e-03, -+ 1.19737133399079663347e-03, -+ 1.20261317342187467987e-03, -+ 1.20716339803685892770e-03, -+ 1.21102002275194891440e-03, -+ 1.21418146054847906831e-03, -+ 1.21664652302620073833e-03, -+ 1.21841442072828740756e-03, -+ 1.21948476323806070595e-03, -+ 1.21985755904754564205e-03, -+ 1.21953321519817120717e-03, -+ 1.21851253669401512168e-03, -+ 1.21679672568812116337e-03, -+ 1.21438738044255738029e-03, -+ 1.21128649406303441106e-03, -+ 1.20749645300896710394e-03, -+ 1.20302003538006298602e-03, -+ 1.19786040898056927312e-03, -+ 1.19202112916260414589e-03, -+ 1.18550613644981912495e-03, -+ 1.17831975394308238227e-03, -+ 1.17046668450985027511e-03, -+ 1.16195200775891173579e-03, -+ 1.15278117680258848643e-03, -+ 1.14296001480831705549e-03, -+ 1.13249471134179986558e-03, -+ 1.12139181850401392637e-03, -+ 1.10965824686446259441e-03, -+ 1.09730126119316579933e-03, -+ 1.08432847599404177941e-03, -+ 1.07074785084228674831e-03, -+ 1.05656768552886740596e-03, -+ 1.04179661501472100617e-03, -+ 1.02644360419797825434e-03, -+ 1.01051794249726128137e-03, -+ 9.94029238254327297819e-04, -+ 9.76987412959428496231e-04, -+ 9.59402695302853094836e-04, -+ 9.41285615056165433402e-04, -+ 9.22646996786851249575e-04, -+ 9.03497953410057892502e-04, -+ 8.83849879581315145925e-04, -+ 8.63714444933994722302e-04, -+ 8.43103587165879497442e-04, -+ 8.22029504978451252585e-04, -+ 8.00504650873420757484e-04, -+ 7.78541723810587853530e-04, -+ 7.56153661731407702139e-04, -+ 7.33353633952590140861e-04, -+ 7.10155033434391397620e-04, -+ 6.86571468927704795654e-04, -+ 6.62616757005092820061e-04, -+ 6.38304913980008450068e-04, -+ 6.13650147719164789327e-04, -+ 5.88666849352420377441e-04, -+ 5.63369584885875388305e-04, -+ 5.37773086722076747342e-04, -+ 5.11892245092671863312e-04, -+ 4.85742099408737208668e-04, -+ 4.59337829533421374787e-04, -+ 4.32694746982132956003e-04, -+ 4.05828286055327270860e-04, -+ 3.78753994909039224618e-04, -+ 3.51487526568311297540e-04, -+ 3.24044629888701042706e-04, -+ 2.96441140471124468109e-04, -+ 2.68692971535064537448e-04, -+ 2.40816104755891792965e-04, -+ 2.12826581070915530529e-04, -+ 1.84740491459934620937e-04, -+ 1.56573967705388389718e-04, -+ 1.28343173137436734367e-04, -+ 1.00064293369274724200e-04, -+ 7.17535270279865756201e-05, -+ 4.34270764862388947451e-05, -+ 1.51011386001131606149e-05, -+-1.32081045416696524620e-05, -+-4.14844948516519899375e-05, -+-6.97119074558447989051e-05, -+-9.78742598787180241452e-05, -+-1.25955521195249200029e-04, -+-1.53939721145969320030e-04, -+-1.81810959208852370795e-04, -+-2.09553413623342002373e-04, -+-2.37151350361132772252e-04, -+-2.64589132039119191708e-04, -+-2.91851226768812584828e-04, -+-3.18922216937715912854e-04, -+-3.45786807917504923019e-04, -+-3.72429836694131806071e-04, -+-3.98836280414924259936e-04, -+-4.24991264848284251536e-04, -+-4.50880072750091832195e-04, -+-4.76488152133843997395e-04, -+-5.01801124438317467692e-04, -+-5.26804792589028771099e-04, -+-5.51485148948722817865e-04, -+-5.75828383152479162180e-04, -+-5.99820889823062712923e-04, -+-6.23449276162207780341e-04, -+-6.46700369413619538528e-04, -+-6.69561224193530326286e-04, -+-6.92019129684716838985e-04, -+-7.14061616690151953514e-04, -+-7.35676464541983651108e-04, -+-7.56851707862541919249e-04, -+-7.77575643173267975865e-04, -+-7.97836835348055277602e-04, -+-8.17624123907448297453e-04, -+-8.36926629150230058478e-04, -+-8.55733758119046612582e-04, -+-8.74035210396826049359e-04, -+-8.91820983730703649786e-04, -+-9.09081379480705491225e-04, -+-9.25807007889788277297e-04, -+-9.41988793172909236878e-04, -+-9.57617978421671824096e-04, -+-9.72686130322748202653e-04, -+-9.87185143686923052483e-04, -+-1.00110724578650659398e-03, -+-1.01444500049902323544e-03, -+-1.02719131225463187161e-03, -+-1.03933942978544770035e-03, -+-1.05088294967471814964e-03, -+-1.06181581970400955479e-03, -+-1.07213234199665663482e-03, -+-1.08182717595588814667e-03, -+-1.09089534099611235214e-03, -+-1.09933221906604130548e-03, -+-1.10713355696224189685e-03, -+-1.11429546843220921015e-03, -+-1.12081443606577282543e-03, -+-1.12668731297399537551e-03, -+-1.13191132425482891832e-03, -+-1.13648406824482742922e-03, -+-1.14040351755644074963e-03, -+-1.14366801990044438496e-03, -+-1.14627629869328028812e-03, -+-1.14822745344909417364e-03, -+-1.14952095995648801048e-03, -+-1.15015667024007182777e-03, -+-1.15013481230698852258e-03, -+-1.14945598967880415094e-03, -+-1.14812118070920518922e-03, -+-1.14613173768805766059e-03, -+-1.14348938573257991221e-03, -+-1.14019622146641639096e-03, -+-1.13625471148757692386e-03, -+-1.13166769062629166132e-03, -+-1.12643835999398341310e-03, -+-1.12057028482466340680e-03, -+-1.11406739211015104116e-03, -+-1.10693396803060797873e-03, -+-1.09917465518223384131e-03, -+-1.09079444960363011567e-03, -+-1.08179869760285343912e-03, -+-1.07219309238717466423e-03, -+-1.06198367049757311231e-03, -+-1.05117680805022224028e-03, -+-1.03977921678728496210e-03, -+-1.02779793993942468629e-03, -+-1.01524034790259534006e-03, -+-1.00211413373173349912e-03, -+-9.88427308454093486029e-04, -+-9.74188196205089573972e-04, -+-9.59405429189479725879e-04, -+-9.44087942471171881302e-04, -+-9.28244968594481583042e-04, -+-9.11886032040267347637e-04, -+-8.95020943520216660794e-04, -+-8.77659794112658803340e-04, -+-8.59812949243432501564e-04, -+-8.41491042515366753467e-04, -+-8.22704969390060901480e-04, -+-8.03465880725650455872e-04, -+-7.83785176174564036933e-04, -+-7.63674497444838786334e-04, -+-7.43145721429159210325e-04, -+-7.22210953206033133382e-04, -+-7.00882518916405724239e-04, -+-6.79172958520581071529e-04, -+-6.57095018439407888011e-04, -+-6.34661644084213061485e-04, -+-6.11885972279487986777e-04, -+-5.88781323583261557639e-04, -+-5.65361194509265800601e-04, -+-5.41639249655565977945e-04, -+-5.17629313744230818220e-04, -+-4.93345363576712316218e-04, -+-4.68801519909265351684e-04, -+-4.44012039254113445412e-04, -+-4.18991305609581871604e-04, -+-3.93753822125390276140e-04, -+-3.68314202707166818418e-04, -+-3.42687163565271075971e-04, -+-3.16887514712763855660e-04, -+-2.90930151417445159289e-04, -+-2.64830045612876889462e-04, -+-2.38602237273343473298e-04, -+-2.12261825757707105287e-04, -+-1.85823961127170580662e-04, -+-1.59303835441746181271e-04, -+-1.32716674040886725835e-04, -+-1.06077726812662281766e-04, -+-7.94022594569434886792e-05, -+-5.27055447474102572785e-05, -+-2.60028537974079832656e-05, -+ 6.90552665357526391948e-07, -+ 2.73594330103061967382e-05, -+ 5.39885733967170351332e-05, -+ 8.05627964425661594961e-05, -+ 1.07066969865010061308e-04, -+ 1.33486015086968664006e-04, -+ 1.59804915805331028064e-04, -+ 1.86008726516105670021e-04, -+ 2.12082580990773740320e-04, -+ 2.38011700700330354344e-04, -+ 2.63781403181116572490e-04, -+ 2.89377110338554649482e-04, -+ 3.14784356683413138554e-04, -+ 3.39988797496425883184e-04, -+ 3.64976216916463994978e-04, -+ 3.89732535947750265582e-04, -+ 4.14243820381606571868e-04, -+ 4.38496288628281076592e-04, -+ 4.62476319454435203307e-04, -+ 4.86170459622126181851e-04, -+ 5.09565431424569481242e-04, -+ 5.32648140115051980069e-04, -+ 5.55405681224405362376e-04, -+ 5.77825347763134713856e-04, -+ 5.99894637304163990538e-04, -+ 6.21601258942250942466e-04, -+ 6.42933140126212003714e-04, -+ 6.63878433360159405340e-04, -+ 6.84425522770043840912e-04, -+ 7.04563030531877763050e-04, -+ 7.24279823158044638691e-04, -+ 7.43565017638393201127e-04, -+ 7.62407987432378152909e-04, -+ 7.80798368309418419284e-04, -+ 7.98726064033930863682e-04, -+ 8.16181251892069835503e-04, -+ 8.33154388057122906319e-04, -+ 8.49636212790671986259e-04, -+ 8.65617755476581307410e-04, -+ 8.81090339485367181512e-04, -+ 8.96045586865937618293e-04, -+ 9.10475422862473118477e-04, -+ 9.24372080253872034986e-04, -+ 9.37728103513655198570e-04, -+ 9.50536352787640661209e-04, -+ 9.62790007687844002875e-04, -+ 9.74482570900335833865e-04, -+ 9.85607871605071426957e-04, -+ 9.96160068706062381411e-04, -+ 1.00613365387018584458e-03, -+ 1.01552345437301723939e-03, -+ 1.02432463575029123783e-03, -+ 1.03253270425362076584e-03, -+ 1.04014350910924206067e-03, -+ 1.04715324457870439731e-03, -+ 1.05355845182046950481e-03, -+ 1.05935602055159754607e-03, -+ 1.06454319050862085752e-03, -+ 1.06911755270714466277e-03, -+ 1.07307705049946027105e-03, -+ 1.07641998042986067850e-03, -+ 1.07914499288730056890e-03, -+ 1.08125109255521835092e-03, -+ 1.08273763865848467007e-03, -+ 1.08360434500746525242e-03, -+ 1.08385127983937892479e-03, -+ 1.08347886545726241128e-03, -+ 1.08248787766686694993e-03, -+ 1.08087944501203837150e-03, -+ 1.07865504780918649262e-03, -+ 1.07581651698158585126e-03, -+ 1.07236603269432462238e-03, -+ 1.06830612279092259861e-03, -+ 1.06363966103263283235e-03, -+ 1.05836986514164428132e-03, -+ 1.05250029464946915324e-03, -+ 1.04603484855193525419e-03, -+ 1.03897776277230035648e-03, -+ 1.03133360743408474848e-03, -+ 1.02310728394540504521e-03, -+ 1.01430402189651124034e-03, -+ 1.00492937577281401564e-03, -+ 9.94989221484924961370e-04, -+ 9.84489752718325020209e-04, -+ 9.73437477104688721023e-04, -+ 9.61839212217239581185e-04, -+ 9.49702081392630992861e-04, -+ 9.37033509381853305618e-04, -+ 9.23841217832837061606e-04, -+ 9.10133220607474814970e-04, -+ 8.95917818935899651529e-04, -+ 8.81203596410921950570e-04, -+ 8.65999413825665684263e-04, -+ 8.50314403857379305478e-04, -+ 8.34157965600880913111e-04, -+ 8.17539758954521347464e-04, -+ 8.00469698862303906568e-04, -+ 7.82957949415445273941e-04, -+ 7.65014917816926143072e-04, -+ 7.46651248212579373396e-04, -+ 7.27877815392361849668e-04, -+ 7.08705718365645193080e-04, -+ 6.89146273814000625765e-04, -+ 6.69211009425744215821e-04, -+ 6.48911657115913286138e-04, -+ 6.28260146135471188311e-04, -+ 6.07268596074486536641e-04, -+ 5.85949309762400622446e-04, -+ 5.64314766070410454152e-04, -+ 5.42377612619488803404e-04, -+ 5.20150658398866173708e-04, -+ 4.97646866298883240425e-04, -+ 4.74879345562723338432e-04, -+ 4.51861344161378882325e-04, -+ 4.28606241096286539726e-04, -+ 4.05127538634095468555e-04, -+ 3.81438854478096842863e-04, -+ 3.57553913880674515205e-04, -+ 3.33486541701773307050e-04, -+ 3.09250654417399727884e-04, -+ 2.84860252083193681537e-04, -+ 2.60329410257538723227e-04, -+ 2.35672271888895488046e-04, -+ 2.10903039172021308919e-04, -+ 1.86035965377764900275e-04, -+ 1.61085346661131244934e-04, -+ 1.36065513852313800395e-04, -+ 1.10990824235409179101e-04, -+ 8.58756533195474008359e-05, -+ 6.07343866069771497630e-05, -+ 3.55814113632548241332e-05, -+ 1.04311083936491137648e-05, -+-1.47021561691009029690e-05, -+-3.98040390611660384779e-05, -+-6.48602280634465855726e-05, -+-8.98564501522054298295e-05, -+-1.14778479619700933784e-04, -+-1.39612146160650535745e-04, -+-1.64343342919338251907e-04, -+-1.88958034493250977151e-04, -+-2.13442264888526227673e-04, -+-2.37782165422681623619e-04, -+-2.61963962570504571396e-04, -+-2.85973985747828166135e-04, -+-3.09798675029788052153e-04, -+-3.33424588798768176210e-04, -+-3.56838411317501760876e-04, -+-3.80026960223441392147e-04, -+-4.02977193940015090100e-04, -+-4.25676219000628282361e-04, -+-4.48111297281314371974e-04, -+-4.70269853137984079287e-04, -+-4.92139480444267647663e-04, -+-5.13707949526006615523e-04, -+-5.34963213988673739162e-04, -+-5.55893417433529703382e-04, -+-5.76486900059300605252e-04, -+-5.96732205145306224443e-04, -+-6.16618085412612730242e-04, -+-6.36133509259657436812e-04, -+-6.55267666868877677634e-04, -+-6.74009976180998601758e-04, -+-6.92350088733664401595e-04, -+-7.10277895361227803138e-04, -+-7.27783531752448681514e-04, -+-7.44857383863318112810e-04, -+-7.61490093181871590539e-04, -+-7.77672561841829005844e-04, -+-7.93395957582958798182e-04, -+-8.08651718554891877494e-04, -+-8.23431557962021757127e-04, -+-8.37727468546858129381e-04, -+-8.51531726909685537062e-04, -+-8.64836897661822056639e-04, -+-8.77635837410563617207e-04, -+-8.89921698573554803210e-04, -+-9.01687933020594461521e-04, -+-9.12928295540940920420e-04, -+-9.23636847134304576554e-04, -+-9.33807958123846902805e-04, -+-9.43436311089422422263e-04, -+-9.52516903619767376157e-04, -+-9.61045050882069389411e-04, -+-9.69016388007670759208e-04, -+-9.76426872292704612667e-04, -+-9.83272785212578647254e-04, -+-9.89550734249325901482e-04, -+-9.95257654530941207952e-04, -+-1.00039081028195663871e-03, -+-1.00494779608456845030e-03, -+-1.00892653794981169979e-03, -+-1.01232529419831556589e-03, -+-1.01514265615029741774e-03, -+-1.01737754862461565394e-03, -+-1.01902923024675272530e-03, -+-1.02009729356571554777e-03, -+-1.02058166497997625417e-03, -+-1.02048260447267446181e-03, -+-1.01980070515639048741e-03, -+-1.01853689262794660890e-03, -+-1.01669242413375375544e-03, -+-1.01426888754638775715e-03, -+-1.01126820015312980997e-03, -+-1.00769260725730729240e-03, -+-1.00354468059351414899e-03, -+-9.98827316557644555306e-04, -+-9.93543734253049580854e-04, -+-9.87697473353981499761e-04, -+-9.81292391787839295494e-04, -+-9.74332663237617449883e-04, -+-9.66822774466185295462e-04, -+-9.58767522464084383411e-04, -+-9.50172011422648630022e-04, -+-9.41041649534305781055e-04, -+-9.31382145622106083493e-04, -+-9.21199505600451087374e-04, -+-9.10500028769397197308e-04, -+-8.99290303944565551711e-04, -+-8.87577205425210550085e-04, -+-8.75367888802800289162e-04, -+-8.62669786612691802744e-04, -+-8.49490603831530729194e-04, -+-8.35838313223061083780e-04, -+-8.21721150535182709787e-04, -+-8.07147609551117617942e-04, -+-7.92126436997654084955e-04, -+-7.76666627313488014232e-04, -+-7.60777417280939101916e-04, -+-7.44468280523723365504e-04, -+-7.27748921874987655251e-04, -+-7.10629271617923522104e-04, -+-6.93119479603028368700e-04, -+-6.75229909245266381526e-04, -+-6.56971131404673501161e-04, -+-6.38353918154137712354e-04, -+-6.19389236437722294319e-04, -+-6.00088241623651132139e-04, -+-5.80462270955458170714e-04, -+-5.60522836905225714695e-04, -+-5.40281620432863491331e-04, -+-5.19750464155060228240e-04, -+-4.98941365428588355299e-04, -+-4.77866469351204028841e-04, -+-4.56538061684547645785e-04, -+-4.34968561703376289593e-04, -+-4.13170514974962768510e-04, -+-3.91156586073003096314e-04, -+-3.68939551230221718554e-04, -+-3.46532290933948842939e-04, -+-3.23947782468940600423e-04, -+-3.01199092411757270073e-04, -+-2.78299369081070745603e-04, -+-2.55261834948078349290e-04, -+-2.32099779011821834730e-04, -+-2.08826549143248190420e-04, -+-1.85455544402832308909e-04, -+-1.62000207336008043239e-04, -+-1.38474016250865456347e-04, -+-1.14890477482541928256e-04, -+-9.12631176487416705644e-05, -+-6.76054759008182519671e-05, -+-4.39310961748295172825e-05, -+-2.02535194471571128164e-05, -+ 3.41372400124625000704e-06, -+ 2.70571223073466086593e-05, -+ 5.06631897304295544804e-05, -+ 7.42184743349819369285e-05, -+ 9.77095656468657952631e-05, -+ 1.21123102278798669873e-04, -+ 1.44445779520586308278e-04, -+ 1.67664356890219484351e-04, -+ 1.90765665640995252163e-04, -+ 2.13736616220833977771e-04, -+ 2.36564205679401197901e-04, -+ 2.59235525018876972973e-04, -+ 2.81737766484226406522e-04, -+ 3.04058230788827618760e-04, -+ 3.26184334271549601202e-04, -+ 3.48103615980852423070e-04, -+ 3.69803744682461728397e-04, -+ 3.91272525786277706496e-04, -+ 4.12497908188799451267e-04, -+ 4.33467991027201371770e-04, -+ 4.54171030341281908426e-04, -+ 4.74595445639567638761e-04, -+ 4.94729826365895158924e-04, -+ 5.14562938262885013335e-04, -+ 5.34083729628744225196e-04, -+ 5.53281337463915729412e-04, -+ 5.72145093504289737989e-04, -+ 5.90664530137289503671e-04, -+ 6.08829386198019386657e-04, -+ 6.26629612641936822176e-04, -+ 6.44055378091031721643e-04, -+ 6.61097074250476457111e-04, -+ 6.77745321192732130128e-04, -+ 6.93990972506254143876e-04, -+ 7.09825120305858456998e-04, -+ 7.25239100102302775876e-04, -+ 7.40224495528040305620e-04, -+ 7.54773142916835191284e-04, -+ 7.68877135734856572910e-04, -+ 7.82528828860328353779e-04, -+ 7.95720842710183188552e-04, -+ 8.08446067210845170301e-04, -+ 8.20697665611487049177e-04, -+ 8.32469078137362318050e-04, -+ 8.43754025481521134980e-04, -+ 8.54546512132969143805e-04, -+ 8.64840829539518206326e-04, -+ 8.74631559103689298733e-04, -+ 8.83913575010109465319e-04, -+ 8.92682046882942626005e-04, -+ 9.00932442271964615751e-04, -+ 9.08660528966120082696e-04, -+ 9.15862377133194608195e-04, -+ 9.22534361284796920223e-04, -+ 9.28673162065495115362e-04, -+ 9.34275767865342418421e-04, -+ 9.39339476254983990131e-04, -+ 9.43861895242741424407e-04, -+ 9.47840944353070817725e-04, -+ 9.51274855525978185397e-04, -+ 9.54162173837028583338e-04, -+ 9.56501758037713121358e-04, -+ 9.58292780916003973483e-04, -+ 9.59534729477142054460e-04, -+ 9.60227404944570409398e-04, -+ 9.60370922581348226629e-04, -+ 9.59965711332194985249e-04, -+ 9.59012513286591154055e-04, -+ 9.57512382963391348902e-04, -+ 9.55466686417531189252e-04, -+ 9.52877100169494421419e-04, -+ 9.49745609958331992936e-04, -+ 9.46074509319091115633e-04, -+ 9.41866397985661216001e-04, -+ 9.37124180120078799534e-04, -+ 9.31851062369440700205e-04, -+ 9.26050551751833660001e-04, -+ 9.19726453372463970473e-04, -+ 9.12882867971548752663e-04, -+ 9.05524189305535872827e-04, -+ 8.97655101363274135137e-04, -+ 8.89280575418887665219e-04, -+ 8.80405866923194158763e-04, -+ 8.71036512235576058406e-04, -+ 8.61178325198361390401e-04, -+ 8.50837393555776847279e-04, -+ 8.40020075219696923594e-04, -+ 8.28732994384399467708e-04, -+ 8.16983037492857960653e-04, -+ 8.04777349056774379821e-04, -+ 7.92123327333073561259e-04, -+ 7.79028619859369530695e-04, -+ 7.65501118851119729744e-04, -+ 7.51548956463218408713e-04, -+ 7.37180499918858086333e-04, -+ 7.22404346508583494919e-04, -+ 7.07229318462486390359e-04, -+ 6.91664457698695713146e-04, -+ 6.75719020451036778314e-04, -+ 6.59402471779397571228e-04, -+ 6.42724479965596788740e-04, -+ 6.25694910798709228936e-04, -+ 6.08323821752458095656e-04, -+ 5.90621456058646517734e-04, -+ 5.72598236680009584250e-04, -+ 5.54264760185757283245e-04, -+ 5.35631790533803520474e-04, -+ 5.16710252763027825043e-04, -+ 4.97511226599373773682e-04, -+ 4.78045939979498718704e-04, -+ 4.58325762495759227340e-04, -+ 4.38362198766371338136e-04, -+ 4.18166881734467700462e-04, -+ 3.97751565900299880723e-04, -+ 3.77128120490046988070e-04, -+ 3.56308522565547207937e-04, -+ 3.35304850078806907388e-04, -+ 3.14129274875331928468e-04, -+ 2.92794055650324276316e-04, -+ 2.71311530861826331624e-04, -+ 2.49694111604887615530e-04, -+ 2.27954274450881122505e-04, -+ 2.06104554256081410344e-04, -+ 1.84157536943679384566e-04, -+ 1.62125852263222448597e-04, -+ 1.40022166532036894350e-04, -+ 1.17859175362270858218e-04, -+ 9.56495963781261012088e-05, -+ 7.34061619272917469060e-05, -+ 5.11416117907757448134e-05, -+ 2.88686858953092775838e-05, -+ 6.60011703245474962544e-06, -+-1.56513764112641267506e-05, -+-3.78730977094623622752e-05, -+-6.00523790315616779367e-05, -+-8.21765886552515715992e-05, -+-1.04233138151800156347e-04, -+-1.26209489539367793924e-04, -+-1.48093162401345972059e-04, -+-1.69871740964736657117e-04, -+-1.91532881135268300563e-04, -+-2.13064317484699505389e-04, -+-2.34453870186744113427e-04, -+-2.55689451897549299090e-04, -+-2.76759074576870677410e-04, -+-2.97650856246099086537e-04, -+-3.18353027679335392423e-04, -+-3.38853939023753682018e-04, -+-3.59142066345504676773e-04, -+-3.79206018097636495413e-04, -+-3.99034541506046805132e-04, -+-4.18616528870369446116e-04, -+-4.37941023775921783445e-04, -+-4.56997227213373118440e-04, -+-4.75774503602719464699e-04, -+-4.94262386718192386383e-04, -+-5.12450585510814218305e-04, -+-5.30328989825377310544e-04, -+-5.47887676008649280625e-04, -+-5.65116912405763628310e-04, -+-5.82007164741549449030e-04, -+-5.98549101384425463745e-04, -+-6.14733598488893004212e-04, -+-6.30551745014977364258e-04, -+-6.45994847621079656963e-04, -+-6.61054435427856318212e-04, -+-6.75722264650496957927e-04, -+-6.89990323096750768871e-04, -+-7.03850834528551736954e-04, -+-7.17296262884492574242e-04, -+-7.30319316361157646819e-04, -+-7.42912951350982778652e-04, -+-7.55070376234532832961e-04, -+-7.66785055025333219143e-04, -+-7.78050710864884066675e-04, -+-7.88861329366501596444e-04, -+-7.99211161806001623743e-04, -+-8.09094728157404166971e-04, -+-8.18506819972308029276e-04, -+-8.27442503101282920627e-04, -+-8.35897120255950105278e-04, -+-8.43866293410389599859e-04, -+-8.51345926040684010221e-04, -+-8.58332205201442922232e-04, -+-8.64821603438301273262e-04, -+-8.70810880535423945462e-04, -+-8.76297085097227715367e-04, -+-8.81277555963454932789e-04, -+-8.85749923457110387506e-04, -+-8.89712110464565414381e-04, -+-8.93162333347438598848e-04, -+-8.96099102685879683565e-04, -+-8.98521223852970446835e-04, -+-9.00427797420107569638e-04, -+-9.01818219393255059504e-04, -+-9.02692181280114911909e-04, -+-9.03049669988348823954e-04, -+-9.02890967555027251605e-04, -+-9.02216650707655248853e-04, -+-9.01027590257164317372e-04, -+-8.99324950323396755253e-04, -+-8.97110187393653770935e-04, -+-8.94385049215033777793e-04, -+-8.91151573521319268802e-04, -+-8.87412086595320399006e-04, -+-8.83169201667640974690e-04, -+-8.78425817152939884119e-04, -+-8.73185114724849367231e-04, -+-8.67450557230792511539e-04, -+-8.61225886448070839484e-04, -+-8.54515120682583636733e-04, -+-8.47322552211840669678e-04, -+-8.39652744573696728503e-04, -+-8.31510529702644309025e-04, -+-8.22901004915378340120e-04, -+-8.13829529747517842198e-04, -+-8.04301722643430768052e-04, -+-7.94323457501185689437e-04, -+-7.83900860074752763550e-04, -+-7.73040304235644501474e-04, -+-7.61748408096249419140e-04, -+-7.50032029997244466084e-04, -+-7.37898264361402087853e-04, -+-7.25354437416511968473e-04, -+-7.12408102789705661648e-04, -+-6.99067036976015396266e-04, -+-6.85339234683824977817e-04, -+-6.71232904059968502400e-04, -+-6.56756461797351536944e-04, -+-6.41918528127957059397e-04, -+-6.26727921704332315012e-04, -+-6.11193654372324123199e-04, -+-5.95324925838475161287e-04, -+-5.79131118235020063596e-04, -+-5.62621790585767769452e-04, -+-5.45806673175928220784e-04, -+-5.28695661829722569208e-04, -+-5.11298812098492927447e-04, -+-4.93626333363000229307e-04, -+-4.75688582853520537230e-04, -+-4.57496059590992946043e-04, -+-4.39059398252854521209e-04, -+-4.20389362967140572426e-04, -+-4.01496841038451060622e-04, -+-3.82392836609444868555e-04, -+-3.63088464261537163542e-04, -+-3.43594942558548969210e-04, -+-3.23923587536901721236e-04, -+-3.04085806146491737303e-04, -+-2.84093089645560742049e-04, -+-2.63957006953748822640e-04, -+-2.43689197967006995066e-04, -+-2.23301366838275436311e-04, -+-2.02805275227777953529e-04, -+-1.82212735526838365925e-04, -+-1.61535604059103902281e-04, -+-1.40785774263093080554e-04, -+-1.19975169859954066938e-04, -+-9.91157380105508263764e-05, -+-7.82194424651331946842e-05, -+-5.72982567107504074688e-05, -+-3.63641571189655019264e-05, -+-1.54291160986802106125e-05, -+ 5.49490474234285622543e-06, -+ 2.63959614233348352161e-05, -+ 4.72621343997122955673e-05, -+ 6.80815353521026694937e-05, -+ 8.88423139508433642357e-05, -+ 1.09532664592484337918e-04, -+ 1.30140833104319903011e-04, -+ 1.50655123413172910328e-04, -+ 1.71063904174602321451e-04, -+ 1.91355615359099600053e-04, -+ 2.11518774790675712300e-04, -+ 2.31541984635477411745e-04, -+ 2.51413937835562545462e-04, -+ 2.71123424484858896975e-04, -+ 2.90659338143525736164e-04, -+ 3.10010682087186043628e-04, -+ 3.29166575487528168323e-04, -+ 3.48116259520795355564e-04, -+ 3.66849103400749643276e-04, -+ 3.85354610332733758284e-04, -+ 4.03622423385466462271e-04, -+ 4.21642331277442610968e-04, -+ 4.39404274074367811459e-04, -+ 4.56898348794905137527e-04, -+ 4.74114814921268088160e-04, -+ 4.91044099811763397334e-04, -+ 5.07676804012220281824e-04, -+ 5.24003706463404693612e-04, -+ 5.40015769601512427185e-04, -+ 5.55704144348954519501e-04, -+ 5.71060174992583653546e-04, -+ 5.86075403946940813073e-04, -+ 6.00741576399512768568e-04, -+ 6.15050644835952228101e-04, -+ 6.28994773442125574073e-04, -+ 6.42566342381337704884e-04, -+ 6.55757951943882421396e-04, -+ 6.68562426566777384153e-04, -+ 6.80972818721725897499e-04, -+ 6.92982412668881352959e-04, -+ 7.04584728074633746646e-04, -+ 7.15773523491389403184e-04, -+ 7.26542799697492522500e-04, -+ 7.36886802895533226179e-04, -+ 7.46800027767298055768e-04, -+ 7.56277220383868350323e-04, -+ 7.65313380969130045012e-04, -+ 7.73903766515502376799e-04, -+ 7.82043893250363385782e-04, -+ 7.89729538951949232121e-04, -+ 7.96956745113565389119e-04, -+ 8.03721818954994393636e-04, -+ 8.10021335280101820522e-04, -+ 8.15852138179731594357e-04, -+ 8.21211342579053417585e-04, -+ 8.26096335628634381720e-04, -+ 8.30504777938583372936e-04, -+ 8.34434604655206872172e-04, -+ 8.37884026379746372007e-04, -+ 8.40851529928737925421e-04, -+ 8.43335878935819161471e-04, -+ 8.45336114294710332107e-04, -+ 8.46851554443294471733e-04, -+ 8.47881795488795693763e-04, -+ 8.48426711174108750049e-04, -+ 8.48486452685477828516e-04, -+ 8.48061448301770160786e-04, -+ 8.47152402885697889713e-04, -+ 8.45760297217433587059e-04, -+ 8.43886387171142548884e-04, -+ 8.41532202735059621686e-04, -+ 8.38699546875822229616e-04, -+ 8.35390494247859852379e-04, -+ 8.31607389748687583081e-04, -+ 8.27352846921140154882e-04, -+ 8.22629746203563960195e-04, -+ 8.17441233029105799972e-04, -+ 8.11790715775362542797e-04, -+ 8.05681863565683954384e-04, -+ 7.99118603923527101411e-04, -+ 7.92105120281344542502e-04, -+ 7.84645849345590325717e-04, -+ 7.76745478319420114104e-04, -+ 7.68408941984943219712e-04, -+ 7.59641419646665534519e-04, -+ 7.50448331938106580861e-04, -+ 7.40835337493533463253e-04, -+ 7.30808329486818254554e-04, -+ 7.20373432039535070703e-04, -+ 7.09536996500486488726e-04, -+ 6.98305597598893957115e-04, -+ 6.86686029473570981770e-04, -+ 6.74685301580476909020e-04, -+ 6.62310634481180966239e-04, -+ 6.49569455514414613798e-04, -+ 6.36469394353982704203e-04, -+ 6.23018278454912912898e-04, -+ 6.09224128391051378099e-04, -+ 5.95095153086705442279e-04, -+ 5.80639744945168250270e-04, -+ 5.65866474877092448525e-04, -+ 5.50784087231426526705e-04, -+ 5.35401494632215197225e-04, -+ 5.19727772724077859492e-04, -+ 5.03772154829525923431e-04, -+ 4.87544026521280851084e-04, -+ 4.71052920112772989698e-04, -+ 4.54308509069835603569e-04, -+ 4.37320602347533553267e-04, -+ 4.20099138654383497463e-04, -+ 4.02654180648284807775e-04, -+ 3.84995909067011564137e-04, -+ 3.67134616796844961539e-04, -+ 3.49080702882780392719e-04, -+ 3.30844666483778653780e-04, -+ 3.12437100776581622944e-04, -+ 2.93868686811618183737e-04, -+ 2.75150187324561020918e-04, -+ 2.56292440507140670877e-04, -+ 2.37306353740675621137e-04, -+ 2.18202897296279266356e-04, -+ 1.98993098004925772883e-04, -+ 1.79688032901358264856e-04, -+ 1.60298822845364506793e-04, -+ 1.40836626124112224753e-04, -+ 1.21312632039215933556e-04, -+ 1.01738054482220324185e-04, -+ 8.21241255021581603984e-05, -+ 6.24820888690072755080e-05, -+ 4.28231936363832337185e-05, -+ 2.31586877076589681926e-05, -+ 3.49981140855670628566e-06, -+-1.61422089292776860909e-05, -+-3.57561673710188603244e-05, -+-5.53308847633998468008e-05, -+-7.48552150979509803470e-05, -+-9.43180518494260796856e-05, -+-1.13708334285348401584e-04, -+-1.33015053743449631566e-04, -+-1.52227259873300292507e-04, -+-1.71334066838623079324e-04, -+-1.90324659476782091653e-04, -+-2.09188299411965425824e-04, -+-2.27914331118587613423e-04, -+-2.46492187931631313944e-04, -+-2.64911398000205382339e-04, -+-2.83161590181416034876e-04, -+-3.01232499870904074039e-04, -+-3.19113974766915017931e-04, -+-3.36795980564636679867e-04, -+-3.54268606577632174954e-04, -+-3.71522071283203947009e-04, -+-3.88546727788614181063e-04, -+-4.05333069215096399290e-04, -+-4.21871733996659933463e-04, -+-4.38153511090731847231e-04, -+-4.54169345097848065496e-04, -+-4.69910341287265624979e-04, -+-4.85367770526103374431e-04, -+-5.00533074108989832485e-04, -+-5.15397868485681603760e-04, -+-5.29953949884007929905e-04, -+-5.44193298825634374886e-04, -+-5.58108084532057653962e-04, -+-5.71690669218670195068e-04, -+-5.84933612274217158006e-04, -+-5.97829674323603708214e-04, -+-6.10371821171734304026e-04, -+-6.22553227626419856781e-04, -+-6.34367281197839366289e-04, -+-6.45807585673186250637e-04, -+-6.56867964564019149454e-04, -+-6.67542464424877488548e-04, -+-6.77825358041074066233e-04, -+-6.87711147484166077093e-04, -+-6.97194567033422758773e-04, -+-7.06270585961741746359e-04, -+-7.14934411184561628694e-04, -+-7.23181489770394637234e-04, -+-7.31007511311650994522e-04, -+-7.38408410154600355381e-04, -+-7.45380367487197487489e-04, -+-7.51919813283889650751e-04, -+-7.58023428106295344038e-04, -+-7.63688144758921860430e-04, -+-7.68911149799110884596e-04, -+-7.73689884900469453805e-04, -+-7.78022048069176852536e-04, -+-7.81905594712582730464e-04, -+-7.85338738559663196610e-04, -+-7.88319952432907605604e-04, -+-7.90847968871373333856e-04, -+-7.92921780604692572579e-04, -+-7.94540640877896479737e-04, -+-7.95704063626980471514e-04, -+-7.96411823505323844020e-04, -+-7.96663955761047642458e-04, -+-7.96460755965521980358e-04, -+-7.95802779593343299035e-04, -+-7.94690841454150087575e-04, -+-7.93126014976744679770e-04, -+-7.91109631346083286806e-04, -+-7.88643278493758549327e-04, -+-7.85728799942701674856e-04, -+-7.82368293506905928061e-04, -+-7.78564109847002514854e-04, -+-7.74318850882812310596e-04, -+-7.69635368063673682044e-04, -+-7.64516760497901438909e-04, -+-7.58966372942442794175e-04, -+-7.52987793654077996498e-04, -+-7.46584852103500504379e-04, -+-7.39761616553728774091e-04, -+-7.32522391504357027643e-04, -+-7.24871715003236934821e-04, -+-7.16814355827273216350e-04, -+-7.08355310534040027645e-04, -+-6.99499800386016380889e-04, -+-6.90253268149437163720e-04, -+-6.80621374769529714592e-04, -+-6.70609995924295360266e-04, -+-6.60225218458873998675e-04, -+-6.49473336702642350601e-04, -+-6.38360848671277059801e-04, -+-6.26894452156058273537e-04, -+-6.15081040702747340251e-04, -+-6.02927699482527735750e-04, -+-5.90441701057256335301e-04, -+-5.77630501041881037026e-04, -+-5.64501733666179588388e-04, -+-5.51063207239021373221e-04, -+-5.37322899517202385612e-04, -+-5.23288952982047124961e-04, -+-5.08969670026456150538e-04, -+-4.94373508055059602412e-04, -+-4.79509074500653401096e-04, -+-4.64385121759629336102e-04, -+-4.49010542049456493497e-04, -+-4.33394362191214064118e-04, -+-4.17545738320244637712e-04, -+-4.01473950527997305165e-04, -+-3.85188397438232619108e-04, -+-3.68698590720627130540e-04, -+-3.52014149545262831995e-04, -+-3.35144794980849110039e-04, -+-3.18100344340219566650e-04, -+-3.00890705476273645578e-04, -+-2.83525871031688149124e-04, -+-2.66015912645737500133e-04, -+-2.48370975121568597112e-04, -+-2.30601270557308229850e-04, -+-2.12717072444391431304e-04, -+-1.94728709736517952358e-04, -+-1.76646560892675731939e-04, -+-1.58481047897534086224e-04, -+-1.40242630262970099540e-04, -+-1.21941799013744982391e-04, -+-1.03589070661107662103e-04, -+-8.51949811676530225713e-05, -+-6.67700799069139572109e-05, -+-4.83249236211274086098e-05, -+-2.98700703807564870525e-05, -+-1.14160735488978414020e-05, -+ 7.02652424554682768497e-06, -+ 2.54471971228236679705e-05, -+ 4.38354419518023738413e-05, -+ 6.21807843308446069313e-05, -+ 8.04727845460066358498e-05, -+ 9.87010435040899136066e-05, -+ 1.16855208636383958460e-04, -+ 1.34924979770344443406e-04, -+ 1.52900114965400754944e-04, -+ 1.70770436309920342057e-04, -+ 1.88525835675920134431e-04, -+ 2.06156280428297997024e-04, -+ 2.23651819085366783272e-04, -+ 2.41002586927498689160e-04, -+ 2.58198811550729352172e-04, -+ 2.75230818362170949389e-04, -+ 2.92089036014278136209e-04, -+ 3.08764001774616207285e-04, -+ 3.25246366828520531121e-04, -+ 3.41526901511388200801e-04, -+ 3.57596500467790591720e-04, -+ 3.73446187734516289129e-04, -+ 3.89067121744707245228e-04, -+ 4.04450600250306482528e-04, -+ 4.19588065160076859831e-04, -+ 4.34471107290538996557e-04, -+ 4.49091471027067759818e-04, -+ 4.63441058892829452643e-04, -+ 4.77511936022862045707e-04, -+ 4.91296334540600198627e-04, -+ 5.04786657835014449663e-04, -+ 5.17975484735516645760e-04, -+ 5.30855573582563605717e-04, -+ 5.43419866191619145568e-04, -+ 5.55661491708522902247e-04, -+ 5.67573770353875343975e-04, -+ 5.79150217054632036016e-04, -+ 5.90384544960849454512e-04, -+ 6.01270668845691608206e-04, -+ 6.11802708386863214850e-04, -+ 6.21974991327834889066e-04, -+ 6.31782056516764687314e-04, -+ 6.41218656822146407942e-04, -+ 6.50279761923036299723e-04, -+ 6.58960560972716405566e-04, -+ 6.67256465134287500389e-04, -+ 6.75163109986891556320e-04, -+ 6.82676357801303567048e-04, -+ 6.89792299683732634992e-04, -+ 6.96507257586713749917e-04, -+ 7.02817786186088130918e-04, -+ 7.08720674623126924326e-04, -+ 7.14212948110944231481e-04, -+ 7.19291869404349885550e-04, -+ 7.23954940132546750399e-04, -+ 7.28199901993943090293e-04, -+ 7.32024737812592227876e-04, -+ 7.35427672455747746989e-04, -+ 7.38407173612188813538e-04, -+ 7.40961952430967151807e-04, -+ 7.43090964020374881993e-04, -+ 7.44793407806954867699e-04, -+ 7.46068727754538611394e-04, -+ 7.46916612443245453087e-04, -+ 7.47336995008605268868e-04, -+ 7.47330052940939869310e-04, -+ 7.46896207745253873714e-04, -+ 7.46036124461981245935e-04, -+ 7.44750711048991790794e-04, -+ 7.43041117625342466269e-04, -+ 7.40908735577333176642e-04, -+ 7.38355196527534156196e-04, -+ 7.35382371167495095879e-04, -+ 7.31992367954923252131e-04, -+ 7.28187531676248857131e-04, -+ 7.23970441875473923535e-04, -+ 7.19343911150391139564e-04, -+ 7.14310983317213688513e-04, -+ 7.08874931444885593435e-04, -+ 7.03039255760210023485e-04, -+ 6.96807681425207193181e-04, -+ 6.90184156188062745106e-04, -+ 6.83172847909139504749e-04, -+ 6.75778141963576887280e-04, -+ 6.68004638522109246875e-04, -+ 6.59857149711750939035e-04, -+ 6.51340696658104286593e-04, -+ 6.42460506411091959722e-04, -+ 6.33222008755997788076e-04, -+ 6.23630832911684193816e-04, -+ 6.13692804118148903594e-04, -+ 6.03413940115261806379e-04, -+ 5.92800447514970491047e-04, -+ 5.81858718069071527597e-04, -+ 5.70595324834820847096e-04, -+ 5.59017018240628819903e-04, -+ 5.47130722054300845832e-04, -+ 5.34943529255999883701e-04, -+ 5.22462697818653785606e-04, -+ 5.09695646398130772746e-04, -+ 4.96649949935782969619e-04, -+ 4.83333335176001986210e-04, -+ 4.69753676101234622468e-04, -+ 4.55918989287601634543e-04, -+ 4.41837429183325480515e-04, -+ 4.27517283312972833521e-04, -+ 4.12966967410454712222e-04, -+ 3.98195020483432121378e-04, -+ 3.83210099812103391695e-04, -+ 3.68020975885298450622e-04, -+ 3.52636527276817995143e-04, -+ 3.37065735465011645077e-04, -+ 3.21317679598622223548e-04, -+ 3.05401531211941905386e-04, -+ 2.89326548892257452619e-04, -+ 2.73102072902946376928e-04, -+ 2.56737519764977252090e-04, -+ 2.40242376800225943771e-04, -+ 2.23626196639659541874e-04, -+ 2.06898591699577582680e-04, -+ 1.90069228629096543095e-04, -+ 1.73147822732087712776e-04, -+ 1.56144132366777384441e-04, -+ 1.39067953326214697627e-04, -+ 1.21929113202958933396e-04, -+ 1.04737465740963099658e-04, -+ 8.75028851780528622514e-05, -+ 7.02352605825545112366e-05, -+ 5.29444901866215451251e-05, -+ 3.56404757200933205497e-05, -+ 1.83331167478597644273e-05, -+ 1.03230501413102183826e-06, -+-1.62520812034707693762e-05, -+-3.35101827263670735968e-05, -+-5.07321650911279374628e-05, -+-6.79082241459080256747e-05, -+-8.50285916240537564164e-05, -+-1.02083540691677796268e-04, -+-1.19063391466316483881e-04, -+-1.35958516502816118129e-04, -+-1.52759346244455719837e-04, -+-1.69456374435215186046e-04, -+-1.86040163490673691061e-04, -+-2.02501349824351403305e-04, -+-2.18830649126511295058e-04, -+-2.35018861592449355329e-04, -+-2.51056877097335180617e-04, -+-2.66935680314695194647e-04, -+-2.82646355775669996281e-04, -+-2.98180092866208153266e-04, -+-3.13528190759385430846e-04, -+-3.28682063280201183005e-04, -+-3.43633243699864576997e-04, -+-3.58373389457262059472e-04, -+-3.72894286804705877604e-04, -+-3.87187855375492433196e-04, -+-4.01246152670716468933e-04, -+-4.15061378462855390652e-04, -+-4.28625879113702864826e-04, -+-4.41932151804175915588e-04, -+-4.54972848673900734286e-04, -+-4.67740780867979507370e-04, -+-4.80228922488919207114e-04, -+-4.92430414451660788955e-04, -+-5.04338568239140645766e-04, -+-5.15946869556969272587e-04, -+-5.27248981884690759263e-04, -+-5.38238749922089398589e-04, -+-5.48910202928370723023e-04, -+-5.59257557952611700225e-04, -+-5.69275222953672071884e-04, -+-5.78957799807889249809e-04, -+-5.88300087202963859455e-04, -+-5.97297083416476414473e-04, -+-6.05943988977575135647e-04, -+-6.14236209210458085871e-04, -+-6.22169356658183671412e-04, -+-6.29739253385739618761e-04, -+-6.36941933161007476510e-04, -+-6.43773643512582892379e-04, -+-6.50230847663354235948e-04, -+-6.56310226338886878658e-04, -+-6.62008679449682451920e-04, -+-6.67323327646487897066e-04, -+-6.72251513747878452071e-04, -+-6.76790804039441285488e-04, -+-6.80938989443917279398e-04, -+-6.84694086561815564058e-04, -+-6.88054338581924984468e-04, -+-6.91018216061473023945e-04, -+-6.93584417575499262779e-04, -+-6.95751870235252118692e-04, -+-6.97519730075439408322e-04, -+-6.98887382310238512544e-04, -+-6.99854441458020392307e-04, -+-7.00420751334910186674e-04, -+-7.00586384917250637808e-04, -+-7.00351644073214348388e-04, -+-6.99717059163839283017e-04, -+-6.98683388513845408767e-04, -+-6.97251617752650001102e-04, -+-6.95422959026119487901e-04, -+-6.93198850079607088379e-04, -+-6.90580953212918528285e-04, -+-6.87571154107985264316e-04, -+-6.84171560529966103770e-04, -+-6.80384500902708982788e-04, -+-6.76212522759481789864e-04, -+-6.71658391069967749057e-04, -+-6.66725086444653041590e-04, -+-6.61415803217692819561e-04, -+-6.55733947409528573555e-04, -+-6.49683134570482436268e-04, -+-6.43267187506764773208e-04, -+-6.36490133890204668257e-04, -+-6.29356203753268024677e-04, -+-6.21869826870875635171e-04, -+-6.14035630030630393862e-04, -+-6.05858434193134814082e-04, -+-5.97343251544118505024e-04, -+-5.88495282440187417530e-04, -+-5.79319912250014150239e-04, -+-5.69822708092951237674e-04, -+-5.60009415476908612407e-04, -+-5.49885954837576801033e-04, -+-5.39458417981255439720e-04, -+-5.28733064433041348440e-04, -+-5.17716317692869828875e-04, -+-5.06414761401502129881e-04, -+-4.94835135418839880059e-04, -+-4.82984331816689843164e-04, -+-4.70869390788640387446e-04, -+-4.58497496479242630431e-04, -+-4.45875972735065601461e-04, -+-4.33012278780107377589e-04, -+-4.19914004818108983763e-04, -+-4.06588867564375744564e-04, -+-3.93044705709642795341e-04, -+-3.79289475318866453699e-04, -+-3.65331245167339706530e-04, -+-3.51178192017081926713e-04, -+-3.36838595836177763076e-04, -+-3.22320834963867378347e-04, -+-3.07633381224204521288e-04, -+-2.92784794991132475261e-04, -+-2.77783720207839526437e-04, -+-2.62638879363297228237e-04, -+-2.47359068428886473296e-04, -+-2.31953151758071922503e-04, -+-2.16430056951960250863e-04, -+-2.00798769693994654060e-04, -+-1.85068328556394910873e-04, -+-1.69247819781622929874e-04, -+-1.53346372041766269151e-04, -+-1.37373151178878973033e-04, -+-1.21337354929306262606e-04, -+-1.05248207635004573535e-04, -+-8.91149549450086627062e-05, -+-7.29468585098004703403e-05, -+-5.67531906719987081617e-05, -+-4.05432291561632574743e-05, -+-2.43262517606341878125e-05, -+-8.11153105499568761387e-06, -+ 8.09167091459697115441e-06, -+ 2.42741079085157292628e-05, -+ 4.04265547626939556413e-05, -+ 5.65398126401744739798e-05, -+ 7.26047142624750100346e-05, -+ 8.86121291176844783554e-05, -+ 1.04552968642355261246e-04, -+ 1.20418191374254643930e-04, -+ 1.36198808073058146538e-04, -+ 1.51885886806070295480e-04, -+ 1.67470557996213817529e-04, -+ 1.82944019429153478633e-04, -+ 1.98297541217112740890e-04, -+ 2.13522470716304618504e-04, -+ 2.28610237395321440291e-04, -+ 2.43552357651734171758e-04, -+ 2.58340439574197757323e-04, -+ 2.72966187647394017187e-04, -+ 2.87421407397178490465e-04, -+ 3.01698009973331443285e-04, -+ 3.15788016667368121211e-04, -+ 3.29683563362888126455e-04, -+ 3.43376904915868638030e-04, -+ 3.56860419462906380220e-04, -+ 3.70126612654194222032e-04, -+ 3.83168121809794538692e-04, -+ 3.95977719996309473864e-04, -+ 4.08548320021925631847e-04, -+ 4.20872978347595460679e-04, -+ 4.32944898912126369117e-04, -+ 4.44757436869292204114e-04, -+ 4.56304102234621905294e-04, -+ 4.67578563440100960016e-04, -+ 4.78574650794741016362e-04, -+ 4.89286359849140845869e-04, -+ 4.99707854662346487480e-04, -+ 5.09833470968881633315e-04, -+ 5.19657719244667921921e-04, -+ 5.29175287669990585850e-04, -+ 5.38381044987819995518e-04, -+ 5.47270043256114818893e-04, -+ 5.55837520492576445640e-04, -+ 5.64078903210458873843e-04, -+ 5.71989808844079565542e-04, -+ 5.79566048062779125977e-04, -+ 5.86803626972093816082e-04, -+ 5.93698749201003678558e-04, -+ 6.00247817874220647612e-04, -+ 6.06447437468376929041e-04, -+ 6.12294415551340506093e-04, -+ 6.17785764403646210467e-04, -+ 6.22918702521296861058e-04, -+ 6.27690655999173577340e-04, -+ 6.32099259794388049390e-04, -+ 6.36142358868971454465e-04, -+ 6.39818009211379277838e-04, -+ 6.43124478736333145788e-04, -+ 6.46060248062606972720e-04, -+ 6.48624011168465121509e-04, -+ 6.50814675924448241516e-04, -+ 6.52631364503392400953e-04, -+ 6.54073413667472913086e-04, -+ 6.55140374932347883084e-04, -+ 6.55832014608344012786e-04, -+ 6.56148313718822465482e-04, -+ 6.56089467795875169558e-04, -+ 6.55655886553618491575e-04, -+ 6.54848193439355763003e-04, -+ 6.53667225063030848942e-04, -+ 6.52114030505376840972e-04, -+ 6.50189870505314443556e-04, -+ 6.47896216527166549613e-04, -+ 6.45234749708334539252e-04, -+ 6.42207359688187111660e-04, -+ 6.38816143318927205305e-04, -+ 6.35063403259281166260e-04, -+ 6.30951646451974345643e-04, -+ 6.26483582485939526248e-04, -+ 6.21662121844317769152e-04, -+ 6.16490374039393236767e-04, -+ 6.10971645635609837167e-04, -+ 6.05109438161931267354e-04, -+ 5.98907445914837149696e-04, -+ 5.92369553653347702404e-04, -+ 5.85499834187430895707e-04, -+ 5.78302545861415578064e-04, -+ 5.70782129933787834436e-04, -+ 5.62943207855098252772e-04, -+ 5.54790578445580164282e-04, -+ 5.46329214974210436787e-04, -+ 5.37564262140980504354e-04, -+ 5.28501032964188142450e-04, -+ 5.19145005574684313687e-04, -+ 5.09501819918850898904e-04, -+ 4.99577274372495932532e-04, -+ 4.89377322267549059315e-04, -+ 4.78908068333559408525e-04, -+ 4.68175765056459951968e-04, -+ 4.57186808956279780707e-04, -+ 4.45947736786433599192e-04, -+ 4.34465221656520647706e-04, -+ 4.22746069081200064391e-04, -+ 4.10797212957284853512e-04, -+ 3.98625711471500149014e-04, -+ 3.86238742941308148531e-04, -+ 3.73643601591243563771e-04, -+ 3.60847693267234983453e-04, -+ 3.47858531091431943082e-04, -+ 3.34683731060088070306e-04, -+ 3.21331007586994784036e-04, -+ 3.07808168995286370300e-04, -+ 2.94123112959944975862e-04, -+ 2.80283821903894213648e-04, -+ 2.66298358350258257497e-04, -+ 2.52174860233517097834e-04, -+ 2.37921536172264099776e-04, -+ 2.23546660706324561889e-04, -+ 2.09058569500978578149e-04, -+ 1.94465654521075659777e-04, -+ 1.79776359177804124882e-04, -+ 1.64999173451064800808e-04, -+ 1.50142628989783814353e-04, -+ 1.35215294193867887652e-04, -+ 1.20225769279667712834e-04, -+ 1.05182681332417253214e-04, -+ 9.00946793482652321869e-05, -+ 7.49704292687580406678e-05, -+ 5.98186090107322883933e-05, -+ 4.46479034941903122767e-05, -+ 2.94669996713655661538e-05, -+ 1.42845815595480592387e-05, -+-8.90674719386678467731e-07, -+-1.60501058898957495679e-05, -+-3.11850664615309880164e-05, -+-4.62869336522098696559e-05, -+-6.13471122938098376541e-05, -+-7.63570397170260420881e-05, -+-9.13081906125804212970e-05, -+-1.06192081866257116186e-04, -+-1.21000277364919335359e-04, -+-1.35724392770807756941e-04, -+-1.50356100261421840461e-04, -+-1.64887133232308251375e-04, -+-1.79309290960107407722e-04, -+-1.93614443223211164184e-04, -+-2.07794534877538741033e-04, -+-2.21841590384600493343e-04, -+-2.35747718289653712892e-04, -+-2.49505115647181735690e-04, -+-2.63106072391320949463e-04, -+-2.76542975648779115836e-04, -+-2.89808313991833633137e-04, -+-3.02894681629039077587e-04, -+-3.15794782531314804225e-04, -+-3.28501434491123775472e-04, -+-3.41007573112413263187e-04, -+-3.53306255729321028528e-04, -+-3.65390665251150495701e-04, -+-3.77254113931894290764e-04, -+-3.88890047061697880296e-04, -+-4.00292046578829127310e-04, -+-4.11453834599746401911e-04, -+-4.22369276865425247180e-04, -+-4.33032386102221345144e-04, -+-4.43437325295184645198e-04, -+-4.53578410872218030017e-04, -+-4.63450115797292723756e-04, -+-4.73047072571043994947e-04, -+-4.82364076137125729737e-04, -+-4.91396086692756878071e-04, -+-5.00138232402001195638e-04, -+-5.08585812010168398199e-04, -+-5.16734297358173813065e-04, -+-5.24579335795330296312e-04, -+-5.32116752489386786451e-04, -+-5.39342552632568559418e-04, -+-5.46252923542469171619e-04, -+-5.52844236656707828902e-04, -+-5.59113049420296060084e-04, -+-5.65056107064770439183e-04, -+-5.70670344278172711819e-04, -+-5.75952886765007470403e-04, -+-5.80901052695480778210e-04, -+-5.85512354043150645873e-04, -+-5.89784497810519033403e-04, -+-5.93715387141844816964e-04, -+-5.97303122322707935599e-04, -+-6.00546001665863931999e-04, -+-6.03442522282995321911e-04, -+-6.05991380742033013650e-04, -+-6.08191473609774341941e-04, -+-6.10041897879654818233e-04, -+-6.11541951284462828586e-04, -+-6.12691132494012132698e-04, -+-6.13489141197734759101e-04, -+-6.13935878072276153793e-04, -+-6.14031444634213687678e-04, -+-6.13776142978129783147e-04, -+-6.13170475400273522204e-04, -+-6.12215143908160716602e-04, -+-6.10911049616502535922e-04, -+-6.09259292029921744813e-04, -+-6.07261168212986615807e-04, -+-6.04918171848152540562e-04, -+-6.02231992182249067230e-04, -+-5.99204512862249404591e-04, -+-5.95837810661095862788e-04, -+-5.92134154094380829765e-04, -+-5.88096001928879556775e-04, -+-5.83726001583780864344e-04, -+-5.79026987425731846405e-04, -+-5.74001978958720709967e-04, -+-5.68654178909981699100e-04, -+-5.62986971213088379512e-04, -+-5.57003918889516810679e-04, -+-5.50708761829973685031e-04, -+-5.44105414476881875038e-04, -+-5.37197963409420707961e-04, -+-5.29990664832675931022e-04, -+-5.22487941972209408471e-04, -+-5.14694382376049554099e-04, -+-5.06614735125277882745e-04, -+-4.98253907955200866543e-04, -+-4.89616964288741747524e-04, -+-4.80709120183835873340e-04, -+-4.71535741196723874168e-04, -+-4.62102339162885156296e-04, -+-4.52414568897704873120e-04, -+-4.42478224818736978665e-04, -+-4.32299237491589249602e-04, -+-4.21883670101533790608e-04, -+-4.11237714852763253538e-04, -+-4.00367689297795705319e-04, -+-3.89280032598777342174e-04, -+-3.77981301723072956981e-04, -+-3.66478167575481482855e-04, -+-3.54777411069201974430e-04, -+-3.42885919137923399647e-04, -+-3.30810680691371770349e-04, -+-3.18558782516682129776e-04, -+-3.06137405127995278469e-04, -+-2.93553818566704544622e-04, -+-2.80815378154804305266e-04, -+-2.67929520203833435379e-04, -+-2.54903757681815789065e-04, -+-2.41745675840952941541e-04, -+-2.28462927808299829519e-04, -+-2.15063230142214405812e-04, -+-2.01554358357060797247e-04, -+-1.87944142418778622041e-04, -+-1.74240462213917245062e-04, -+-1.60451242994757493389e-04, -+-1.46584450803131455471e-04, -+-1.32648087875677540707e-04, -+-1.18650188032929176604e-04, -+-1.04598812055253963184e-04, -+-9.05020430478532816746e-05, -+-7.63679817980816182978e-05, -+-6.22047421270673621006e-05, -+-4.80204462387773454404e-05, -+-3.38232200690939612160e-05, -+-1.96211886373398563383e-05, -+-5.42247140324502025757e-06, -+ 8.76482236824777340069e-06, -+ 2.29325982315957407963e-05, -+ 3.70727811720706265371e-05, -+ 5.11773202013517019616e-05, -+ 6.52381929346686494130e-05, -+ 7.92474101469974555583e-05, -+ 9.31970203054730103771e-05, -+ 1.07079114075787359224e-04, -+ 1.20885828799772198955e-04, -+ 1.34609352941733671338e-04, -+ 1.48241930501015857979e-04, -+ 1.61775865388299365999e-04, -+ 1.75203525763176128777e-04, -+ 1.88517348330553255508e-04, -+ 2.01709842593477496403e-04, -+ 2.14773595059988993677e-04, -+ 2.27701273401630213721e-04, -+ 2.40485630561381157630e-04, -+ 2.53119508808481513077e-04, -+ 2.65595843738193170946e-04, -+ 2.77907668214037251522e-04, -+ 2.90048116250403941428e-04, -+ 3.02010426833358551230e-04, -+ 3.13787947677527593714e-04, -+ 3.25374138916987524356e-04, -+ 3.36762576728041407650e-04, -+ 3.47946956882078583737e-04, -+ 3.58921098226289516687e-04, -+ 3.69678946090518610861e-04, -+ 3.80214575618283698918e-04, -+ 3.90522195020292855420e-04, -+ 4.00596148748304063669e-04, -+ 4.10430920588102858375e-04, -+ 4.20021136669482232032e-04, -+ 4.29361568391889935302e-04, -+ 4.38447135263920031219e-04, -+ 4.47272907655273392787e-04, -+ 4.55834109459644649508e-04, -+ 4.64126120667108176508e-04, -+ 4.72144479844627002613e-04, -+ 4.79884886523366084934e-04, -+ 4.87343203491520887780e-04, -+ 4.94515458991510439488e-04, -+ 5.01397848820237619291e-04, -+ 5.07986738331495536053e-04, -+ 5.14278664339342934768e-04, -+ 5.20270336921509223872e-04, -+ 5.25958641121905003633e-04, -+ 5.31340638551345634602e-04, -+ 5.36413568885707545825e-04, -+ 5.41174851260732862543e-04, -+ 5.45622085562818821651e-04, -+ 5.49753053615153054572e-04, -+ 5.53565720258578693874e-04, -+ 5.57058234326825011708e-04, -+ 5.60228929515402870182e-04, -+ 5.63076325144043553055e-04, -+ 5.65599126812190268823e-04, -+ 5.67796226947321581655e-04, -+ 5.69666705245914757952e-04, -+ 5.71209829006884771928e-04, -+ 5.72425053357448988464e-04, -+ 5.73312021371367866798e-04, -+ 5.73870564079618605650e-04, -+ 5.74100700373610150010e-04, -+ 5.74002636801101105701e-04, -+ 5.73576767255045208427e-04, -+ 5.72823672555648950346e-04, -+ 5.71744119926011510821e-04, -+ 5.70339062361724402107e-04, -+ 5.68609637894926635629e-04, -+ 5.66557168753326501759e-04, -+ 5.64183160414795923689e-04, -+ 5.61489300558173053124e-04, -+ 5.58477457910976646596e-04, -+ 5.55149680994817618443e-04, -+ 5.51508196769305851677e-04, -+ 5.47555409175347492477e-04, -+ 5.43293897578766660054e-04, -+ 5.38726415115223450716e-04, -+ 5.33855886937539434942e-04, -+ 5.28685408366441232306e-04, -+ 5.23218242945951541104e-04, -+ 5.17457820404608101993e-04, -+ 5.11407734523782039546e-04, -+ 5.05071740914395756958e-04, -+ 4.98453754703430222672e-04, -+ 4.91557848131608235084e-04, -+ 4.84388248063773933609e-04, -+ 4.76949333413366201133e-04, -+ 4.69245632482725018135e-04, -+ 4.61281820220592905877e-04, -+ 4.53062715398815335326e-04, -+ 4.44593277709539084434e-04, -+ 4.35878604784927761902e-04, -+ 4.26923929141124992512e-04, -+ 4.17734615048157432570e-04, -+ 4.08316155327850989487e-04, -+ 3.98674168081502775223e-04, -+ 3.88814393349325734903e-04, -+ 3.78742689703628627584e-04, -+ 3.68465030777748246259e-04, -+ 3.57987501732803619064e-04, -+ 3.47316295664270213630e-04, -+ 3.36457709950689946247e-04, -+ 3.25418142546407844398e-04, -+ 3.14204088220705103369e-04, -+ 3.02822134745452705828e-04, -+ 2.91278959033536570707e-04, -+ 2.79581323230313654512e-04, -+ 2.67736070760376913824e-04, -+ 2.55750122331942382741e-04, -+ 2.43630471901182189993e-04, -+ 2.31384182598852114476e-04, -+ 2.19018382621588081956e-04, -+ 2.06540261090263434262e-04, -+ 1.93957063877727543073e-04, -+ 1.81276089408560325388e-04, -+ 1.68504684432981764438e-04, -+ 1.55650239777576011087e-04, -+ 1.42720186075200863515e-04, -+ 1.29721989476556069784e-04, -+ 1.16663147345869003713e-04, -+ 1.03551183943265592683e-04, -+ 9.03936460960799980377e-05, -+ 7.71980988618959664254e-05, -+ 6.39721211855788279756e-05, -+ 5.07233015529098420324e-05, -+ 3.74592336431094660547e-05, -+ 2.41875119832061500670e-05, -+ 1.09157276060909018059e-05, -+-2.34853628469845146187e-06, -+-1.55977086414162786562e-05, -+-2.88242348869596923613e-05, -+-4.20205812159120831802e-05, -+-5.51792388792400324794e-05, -+-6.82927284502260999177e-05, -+-8.13536040692178018903e-05, -+-9.43544576647877523837e-05, -+-1.07287923148899612901e-04, -+-1.20146680583802623705e-04, -+-1.32923460318065689029e-04, -+-1.45611047089732014966e-04, -+-1.58202284094046845058e-04, -+-1.70690077013562770646e-04, -+-1.83067398008342023790e-04, -+-1.95327289664015750449e-04, -+-2.07462868895485753841e-04, -+-2.19467330804082712487e-04, -+-2.31333952486024421909e-04, -+-2.43056096790058889963e-04, -+-2.54627216022116969682e-04, -+-2.66040855595085605489e-04, -+-2.77290657621565787404e-04, -+-2.88370364447411301270e-04, -+-2.99273822124557198864e-04, -+-3.09994983820817795236e-04, -+-3.20527913164946520654e-04, -+-3.30866787525005792182e-04, -+-3.41005901218438382556e-04, -+-3.50939668651816677209e-04, -+-3.60662627388737895996e-04, -+-3.70169441144112937835e-04, -+-3.79454902703223032924e-04, -+-3.88513936763931614412e-04, -+-3.97341602700649319281e-04, -+-4.05933097248160023023e-04, -+-4.14283757104453339952e-04, -+-4.22389061450620915700e-04, -+-4.30244634386746675411e-04, -+-4.37846247282407585646e-04, -+-4.45189821040535387009e-04, -+-4.52271428273436375180e-04, -+-4.59087295389815042927e-04, -+-4.65633804591701605784e-04, -+-4.71907495780237373154e-04, -+-4.77905068369312367293e-04, -+-4.83623383006156549232e-04, -+-4.89059463197895642403e-04, -+-4.94210496843377989837e-04, -+-4.99073837669386272294e-04, -+-5.03647006570560255671e-04, -+-5.07927692852353862910e-04, -+-5.11913755376417790866e-04, -+-5.15603223607854132746e-04, -+-5.18994298563852079348e-04, -+-5.22085353663235022734e-04, -+-5.24874935476607245785e-04, -+-5.27361764376676599858e-04, -+-5.29544735088589781265e-04, -+-5.31422917139951151225e-04, -+-5.32995555210500379477e-04, -+-5.34262069381259826692e-04, -+-5.35222055283147762558e-04, -+-5.35875284145083223553e-04, -+-5.36221702741643767819e-04, -+-5.36261433240417940797e-04, -+-5.35994772949250210085e-04, -+-5.35422193963616460319e-04, -+-5.34544342714442298307e-04, -+-5.33362039416725316164e-04, -+-5.31876277419383609174e-04, -+-5.30088222456788840664e-04, -+-5.27999211802546121117e-04, -+-5.25610753326072018335e-04, -+-5.22924524452632929344e-04, -+-5.19942371027533258195e-04, -+-5.16666306085201390737e-04, -+-5.13098508523981305419e-04, -+-5.09241321687478316720e-04, -+-5.05097251853375752567e-04, -+-5.00668966630677097357e-04, -+-4.95959293266389714822e-04, -+-4.90971216862717439386e-04, -+-4.85707878505841088215e-04, -+-4.80172573307527546498e-04, -+-4.74368748360683557905e-04, -+-4.68300000610171580050e-04, -+-4.61970074640185440762e-04, -+-4.55382860379525326953e-04, -+-4.48542390726171106338e-04, -+-4.41452839092643458969e-04, -+-4.34118516873516094388e-04, -+-4.26543870836773282920e-04, -+-4.18733480440457346301e-04, -+-4.10692055076295619871e-04, -+-4.02424431241824444132e-04, -+-3.93935569642999588221e-04, -+-3.85230552228620710866e-04, -+-3.76314579158696684014e-04, -+-3.67192965708273077411e-04, -+-3.57871139108791979765e-04, -+-3.48354635328699147479e-04, -+-3.38649095795268096840e-04, -+-3.28760264059559039092e-04, -+-3.18693982406488616858e-04, -+-3.08456188411998706057e-04, -+-2.98052911449364968648e-04, -+-2.87490269146621982028e-04, -+-2.76774463797361711895e-04, -+-2.65911778726769776858e-04, -+-2.54908574615198501266e-04, -+-2.43771285781356852364e-04, -+-2.32506416427293309719e-04, -+-2.21120536847362134797e-04, -+-2.09620279603374160817e-04, -+-1.98012335668160057052e-04, -+-1.86303450539779524029e-04, -+-1.74500420328618278693e-04, -+-1.62610087819718690657e-04, -+-1.50639338512448478849e-04, -+-1.38595096639894068595e-04, -+-1.26484321170500490497e-04, -+-1.14314001793776732867e-04, -+-1.02091154892787922296e-04, -+-8.98228195055708475902e-05, -+-7.75160532779040826849e-05, -+-6.51779284095440432020e-05, -+-5.28155275965366106071e-05, -+-4.04359399717151504088e-05, -+-2.80462570457926562079e-05, -+-1.56535686513557642486e-05, -+-3.26495889210444343624e-06, -+ 9.11249790054165639743e-06, -+ 2.14717412006368892899e-05, -+ 3.38057283092167403242e-05, -+ 4.61074383610954739352e-05, -+ 5.83698763150761234034e-05, -+ 7.05860769251900996464e-05, -+ 8.27491086907310743719e-05, -+ 9.48520777828465352357e-05, -+ 1.06888131945465347230e-04, -+ 1.18850464368359115953e-04, -+ 1.30732317530151336904e-04, -+ 1.42526987009093485245e-04, -+ 1.54227825259548495572e-04, -+ 1.65828245351846937858e-04, -+ 1.77321724673696056200e-04, -+ 1.88701808590856294186e-04, -+ 1.99962114065118143997e-04, -+ 2.11096333227541019164e-04, -+ 2.22098236904959408719e-04, -+ 2.32961678097786452921e-04, -+ 2.43680595407194330610e-04, -+ 2.54249016409682922994e-04, -+ 2.64661060977358164950e-04, -+ 2.74910944541823074223e-04, -+ 2.84992981300038268795e-04, -+ 2.94901587360451048966e-04, -+ 3.04631283827309126255e-04, -+ 3.14176699821949083694e-04, -+ 3.23532575438972966244e-04, -+ 3.32693764636005074025e-04, -+ 3.41655238055194434080e-04, -+ 3.50412085775090025464e-04, -+ 3.58959519991325229707e-04, -+ 3.67292877624660627292e-04, -+ 3.75407622854972045263e-04, -+ 3.83299349579812611254e-04, -+ 3.90963783796212480549e-04, -+ 3.98396785904493201929e-04, -+ 4.05594352932717237652e-04, -+ 4.12552620680778098922e-04, -+ 4.19267865782840679426e-04, -+ 4.25736507687102228546e-04, -+ 4.31955110551815945567e-04, -+ 4.37920385056580596227e-04, -+ 4.43629190127953329428e-04, -+ 4.49078534578485372587e-04, -+ 4.54265578658337963736e-04, -+ 4.59187635518681089644e-04, -+ 4.63842172586124870497e-04, -+ 4.68226812847528570376e-04, -+ 4.72339336044462119145e-04, -+ 4.76177679776842175188e-04, -+ 4.79739940515123866431e-04, -+ 4.83024374520600813590e-04, -+ 4.86029398673382302676e-04, -+ 4.88753591207665154424e-04, -+ 4.91195692353966193756e-04, -+ 4.93354604888095117816e-04, -+ 4.95229394586578497428e-04, -+ 4.96819290588439285358e-04, -+ 4.98123685663175381003e-04, -+ 4.99142136384935733613e-04, -+ 4.99874363212820149900e-04, -+ 5.00320250477433235529e-04, -+ 5.00479846273746572204e-04, -+ 5.00353362260458648866e-04, -+ 4.99941173366037620342e-04, -+ 4.99243817401748952133e-04, -+ 4.98261994581954289173e-04, -+ 4.96996566952077824426e-04, -+ 4.95448557724650537858e-04, -+ 4.93619150523917594661e-04, -+ 4.91509688539529211379e-04, -+ 4.89121673589913252660e-04, -+ 4.86456765095920123584e-04, -+ 4.83516778965485997076e-04, -+ 4.80303686389979968101e-04, -+ 4.76819612553058206749e-04, -+ 4.73066835252845254919e-04, -+ 4.69047783438315086732e-04, -+ 4.64765035660812749103e-04, -+ 4.60221318441676426666e-04, -+ 4.55419504556999951966e-04, -+ 4.50362611240582178668e-04, -+ 4.45053798306218380970e-04, -+ 4.39496366190426988700e-04, -+ 4.33693753916839246001e-04, -+ 4.27649536983611762604e-04, -+ 4.21367425174935209421e-04, -+ 4.14851260298147500507e-04, -+ 4.08105013847745185657e-04, -+ 4.01132784597763502807e-04, -+ 3.93938796123864838888e-04, -+ 3.86527394256778707507e-04, -+ 3.78903044468504332596e-04, -+ 3.71070329192896123955e-04, -+ 3.63033945082216335121e-04, -+ 3.54798700201316714441e-04, -+ 3.46369511160995113223e-04, -+ 3.37751400192573319938e-04, -+ 3.28949492164903488020e-04, -+ 3.19969011546054665687e-04, -+ 3.10815279311211242839e-04, -+ 3.01493709798685276691e-04, -+ 2.92009807515892561881e-04, -+ 2.82369163897162314333e-04, -+ 2.72577454015293597824e-04, -+ 2.62640433248783711044e-04, -+ 2.52563933906683622723e-04, -+ 2.42353861813065601894e-04, -+ 2.32016192853029426611e-04, -+ 2.21556969482438587647e-04, -+ 2.10982297203188133052e-04, -+ 2.00298341006229532702e-04, -+ 1.89511321784351343799e-04, -+ 1.78627512716812605594e-04, -+ 1.67653235627924536433e-04, -+ 1.56594857321689550278e-04, -+ 1.45458785894609618538e-04, -+ 1.34251467028869596798e-04, -+ 1.22979380267843285647e-04, -+ 1.11649035276331349935e-04, -+ 1.00266968087514806969e-04, -+ 8.88397373387060364193e-05, -+ 7.73739204984463118959e-05, -+ 6.58761100865689746284e-05, -+ 5.43529098898822812845e-05, -+ 4.28109311752722368678e-05, -+ 3.12567889026958147750e-05, -+ 1.96970979400246795697e-05, -+ 8.13846928198325526361e-06, -+-3.41249372467339250558e-06, -+-1.49491991475911624329e-05, -+-2.64650702247123145554e-05, -+-3.79535491074849259605e-05, -+-4.94081005893409459882e-05, -+-6.08222158171220890705e-05, -+-7.21894159836215413640e-05, -+-8.35032559989468706153e-05, -+-9.47573281387071252556e-05, -+-1.05945265666950816461e-04, -+-1.17060746431808460001e-04, -+-1.28097496431813168485e-04, -+-1.39049293350893167628e-04, -+-1.49909970060043025702e-04, -+-1.60673418083712545501e-04, -+-1.71333591028951604061e-04, -+-1.81884507975470710237e-04, -+-1.92320256824521286943e-04, -+-2.02634997604990462535e-04, -+-2.12822965734663506043e-04, -+-2.22878475234921188562e-04, -+-2.32795921897065518930e-04, -+-2.42569786398529724757e-04, -+-2.52194637367171917153e-04, -+-2.61665134392132306407e-04, -+-2.70976030979354039815e-04, -+-2.80122177450312201570e-04, -+-2.89098523782284854127e-04, -+-2.97900122388595328931e-04, -+-3.06522130837423188374e-04, -+-3.14959814507391293315e-04, -+-3.23208549178839786662e-04, -+-3.31263823559207256243e-04, -+-3.39121241741069823911e-04, -+-3.46776525591634588071e-04, -+-3.54225517072336341072e-04, -+-3.61464180487291921601e-04, -+-3.68488604659406027153e-04, -+-3.75295005032959282966e-04, -+-3.81879725701552677659e-04, -+-3.88239241360328717068e-04, -+-3.94370159181469716065e-04, -+-4.00269220611873847385e-04, -+-4.05933303092217750898e-04, -+-4.11359421696386878559e-04, -+-4.16544730690475114351e-04, -+-4.21486525010528862399e-04, -+-4.26182241658291949011e-04, -+-4.30629461014228067349e-04, -+-4.34825908067166936634e-04, -+-4.38769453559957806933e-04, -+-4.42458115050543214063e-04, -+-4.45890057887998378632e-04, -+-4.49063596103017892164e-04, -+-4.51977193212385814410e-04, -+-4.54629462937196024159e-04, -+-4.57019169834384534831e-04, -+-4.59145229841358777558e-04, -+-4.61006710733478388374e-04, -+-4.62602832494264496789e-04, -+-4.63932967598159218692e-04, -+-4.64996641205815024796e-04, -+-4.65793531271870616534e-04, -+-4.66323468565258629059e-04, -+-4.66586436602117857111e-04, -+-4.66582571491450407916e-04, -+-4.66312161693693675614e-04, -+-4.65775647692456124232e-04, -+-4.64973621579678497197e-04, -+-4.63906826554567289656e-04, -+-4.62576156336664179227e-04, -+-4.60982654493493390190e-04, -+-4.59127513683252981222e-04, -+-4.57012074813076816290e-04, -+-4.54637826113443851636e-04, -+-4.52006402129344277314e-04, -+-4.49119582628882253825e-04, -+-4.45979291430018782647e-04, -+-4.42587595146185029237e-04, -+-4.38946701851662950556e-04, -+-4.35058959667485500768e-04, -+-4.30926855268744430933e-04, -+-4.26553012314354973531e-04, -+-4.21940189800147375659e-04, -+-4.17091280336356255796e-04, -+-4.12009308350574096971e-04, -+-4.06697428217259312686e-04, -+-4.01158922314968034977e-04, -+-3.95397199012481159307e-04, -+-3.89415790585079821338e-04, -+-3.83218351062148158623e-04, -+-3.76808654007610018769e-04, -+-3.70190590234281159936e-04, -+-3.63368165453703019507e-04, -+-3.56345497862799480068e-04, -+-3.49126815668818354065e-04, -+-3.41716454554033186291e-04, -+-3.34118855081727756696e-04, -+-3.26338560045002091647e-04, -+-3.18380211759965842631e-04, -+-3.10248549305032668161e-04, -+-3.01948405707699765559e-04, -+-2.93484705080720911091e-04, -+-2.84862459709394287826e-04, -+-2.76086767091391477574e-04, -+-2.67162806931154044997e-04, -+-2.58095838090502502794e-04, -+-2.48891195497272449746e-04, -+-2.39554287013787821662e-04, -+-2.30090590267009276020e-04, -+-2.20505649442205787147e-04, -+-2.10805072042026829309e-04, -+-2.00994525612865481291e-04, -+-1.91079734440417233063e-04, -+-1.81066476216359793653e-04, -+-1.70960578678090068449e-04, -+-1.60767916223468677233e-04, -+-1.50494406502535882537e-04, -+-1.40146006988172149195e-04, -+-1.29728711527686151094e-04, -+-1.19248546877326160043e-04, -+-1.08711569221710101099e-04, -+-9.81238606801850763708e-05, -+-8.74915258021262919313e-05, -+-7.68206880531919903462e-05, -+-6.61174862945537560044e-05, -+-5.53880712571479811158e-05, -+-4.46386020128183616507e-05, -+-3.38752424447514053707e-05, -+-2.31041577187158825475e-05, -+-1.23315107575055638581e-05, -+-1.56345872044351334759e-06, -+ 9.19385051001696058297e-06, -+ 1.99342818325943639068e-05, -+ 3.06517164204148291097e-05, -+ 4.13400552010434981019e-05, -+ 5.19932223217173526989e-05, -+ 6.26051685973046974495e-05, -+ 7.31698749393950269174e-05, -+ 8.36813557645763278318e-05, -+ 9.41336623796225205937e-05, -+ 1.04520886342181746720e-04, -+ 1.14837162794693847952e-04, -+ 1.25076673769810187576e-04, -+ 1.35233651465430277944e-04, -+ 1.45302381487516881669e-04, -+ 1.55277206058868723132e-04, -+ 1.65152527192051468401e-04, -+ 1.74922809824715685349e-04, -+ 1.84582584915542787917e-04, -+ 1.94126452499097224393e-04, -+ 2.03549084697879242812e-04, -+ 2.12845228689902707473e-04, -+ 2.22009709630148407153e-04, -+ 2.31037433524272298050e-04, -+ 2.39923390052979132632e-04, -+ 2.48662655345496428575e-04, -+ 2.57250394700618317985e-04, -+ 2.65681865253823213443e-04, -+ 2.73952418588994082733e-04, -+ 2.82057503293309968541e-04, -+ 2.89992667453910593113e-04, -+ 2.97753561094963236852e-04, -+ 3.05335938553796587460e-04, -+ 3.12735660794901402029e-04, -+ 3.19948697660284706902e-04, -+ 3.26971130055313046695e-04, -+ 3.33799152068596993118e-04, -+ 3.40429073024882096823e-04, -+ 3.46857319469846304971e-04, -+ 3.53080437085642826617e-04, -+ 3.59095092536410422437e-04, -+ 3.64898075242447582529e-04, -+ 3.70486299082366027022e-04, -+ 3.75856804022209637847e-04, -+ 3.81006757670713364344e-04, -+ 3.85933456759954328450e-04, -+ 3.90634328550441736316e-04, -+ 3.95106932160183021464e-04, -+ 3.99348959816850238372e-04, -+ 4.03358238032495769118e-04, -+ 4.07132728700219297200e-04, -+ 4.10670530112230828569e-04, -+ 4.13969877898831897789e-04, -+ 4.17029145887845879240e-04, -+ 4.19846846884104163249e-04, -+ 4.22421633368623200468e-04, -+ 4.24752298117164013222e-04, -+ 4.26837774737901984833e-04, -+ 4.28677138127993610176e-04, -+ 4.30269604848864133020e-04, -+ 4.31614533420087809028e-04, -+ 4.32711424531789182885e-04, -+ 4.33559921175517891476e-04, -+ 4.34159808693626808693e-04, -+ 4.34511014747204218304e-04, -+ 4.34613609202668001435e-04, -+ 4.34467803937177638515e-04, -+ 4.34073952563060591527e-04, -+ 4.33432550071505902529e-04, -+ 4.32544232395796221600e-04, -+ 4.31409775894451988712e-04, -+ 4.30030096754630268997e-04, -+ 4.28406250316232413682e-04, -+ 4.26539430317180844748e-04, -+ 4.24430968060405871753e-04, -+ 4.22082331503046044325e-04, -+ 4.19495124268545250320e-04, -+ 4.16671084582238100344e-04, -+ 4.13612084131137220516e-04, -+ 4.10320126848655590979e-04, -+ 4.06797347625035990524e-04, -+ 4.03046010944322816681e-04, -+ 3.99068509448671923049e-04, -+ 3.94867362431040608978e-04, -+ 3.90445214257016648927e-04, -+ 3.85804832716899566078e-04, -+ 3.80949107308997192770e-04, -+ 3.75881047455209468464e-04, -+ 3.70603780649984598967e-04, -+ 3.65120550543784417111e-04, -+ 3.59434714962230262691e-04, -+ 3.53549743862119564622e-04, -+ 3.47469217225564457226e-04, -+ 3.41196822893517369337e-04, -+ 3.34736354339987610389e-04, -+ 3.28091708388290057355e-04, -+ 3.21266882870694259894e-04, -+ 3.14265974232871717151e-04, -+ 3.07093175084575183576e-04, -+ 2.99752771698005490968e-04, -+ 2.92249141455357803153e-04, -+ 2.84586750247056946388e-04, -+ 2.76770149822231086197e-04, -+ 2.68803975092983104406e-04, -+ 2.60692941394056651970e-04, -+ 2.52441841699531203946e-04, -+ 2.44055543798067387786e-04, -+ 2.35538987428655314377e-04, -+ 2.26897181378157982660e-04, -+ 2.18135200542623168421e-04, -+ 2.09258182954089169475e-04, -+ 2.00271326774336208163e-04, -+ 1.91179887257744631369e-04, -+ 1.81989173684729625387e-04, -+ 1.72704546267654705490e-04, -+ 1.63331413031008576943e-04, -+ 1.53875226667652081989e-04, -+ 1.44341481372964688425e-04, -+ 1.34735709658744315766e-04, -+ 1.25063479148570258709e-04, -+ 1.15330389356819486019e-04, -+ 1.05542068452749301325e-04, -+ 9.57041700118449787478e-05, -+ 8.58223697561741577077e-05, -+ 7.59023622856443207175e-05, -+ 6.59498578020433471767e-05, -+ 5.59705788277444033440e-05, -+ 4.59702569209572621425e-05, -+ 3.59546293894085665843e-05, -+ 2.59294360043086512160e-05, -+ 1.59004157166498285290e-05, -+ 5.87330337721188446920e-06, -+-4.14617353701999446564e-06, -+-1.41522981889934754151e-05, -+-2.41393676379234885633e-05, -+-3.41016960841382575317e-05, -+-4.40336181005696522257e-05, -+-5.39294918490548975433e-05, -+-6.37837022796263207513e-05, -+-7.35906643109786139231e-05, -+-8.33448259903158111123e-05, -+-9.30406716307915674464e-05, -+-1.02672724924753142484e-04, -+-1.12235552031169472749e-04, -+-1.21723764635187306645e-04, -+-1.31132022978417295961e-04, -+-1.40455038858246640358e-04, -+-1.49687578594178148693e-04, -+-1.58824465959857513524e-04, -+-1.67860585079007983188e-04, -+-1.76790883283683004619e-04, -+-1.85610373933242124578e-04, -+-1.94314139192479492721e-04, -+-2.02897332767363176810e-04, -+-2.11355182596845939808e-04, -+-2.19682993499378809155e-04, -+-2.27876149772357342645e-04, -+-2.35930117743474312237e-04, -+-2.43840448272265441099e-04, -+-2.51602779200596157229e-04, -+-2.59212837750722130490e-04, -+-2.66666442869611193447e-04, -+-2.73959507518241514052e-04, -+-2.81088040904634635809e-04, -+-2.88048150659414798139e-04, -+-2.94836044952623201488e-04, -+-3.01448034550882504670e-04, -+-3.07880534813461108779e-04, -+-3.14130067626494494971e-04, -+-3.20193263274004568698e-04, -+-3.26066862245033475126e-04, -+-3.31747716975704792786e-04, -+-3.37232793525372445079e-04, -+-3.42519173185958092365e-04, -+-3.47604054023637506869e-04, -+-3.52484752352054538874e-04, -+-3.57158704136308719976e-04, -+-3.61623466326981902238e-04, -+-3.65876718123521590606e-04, -+-3.69916262166333537249e-04, -+-3.73740025656983437721e-04, -+-3.77346061405942046450e-04, -+-3.80732548807360233426e-04, -+-3.83897794740389560527e-04, -+-3.86840234396619738182e-04, -+-3.89558432033239830650e-04, -+-3.92051081651568350539e-04, -+-3.94317007600659507997e-04, -+-3.96355165105705619343e-04, -+-3.98164640721032441449e-04, -+-3.99744652707502629626e-04, -+-4.01094551334191251613e-04, -+-4.02213819104267004522e-04, -+-4.03102070904986001763e-04, -+-4.03759054081854400035e-04, -+-4.04184648436960245865e-04, -+-4.04378866151571740410e-04, -+-4.04341851633132352058e-04, -+-4.04073881286819201839e-04, -+-4.03575363211878201074e-04, -+-4.02846836823000703422e-04, -+-4.01888972397027575446e-04, -+-4.00702570545332346658e-04, -+-3.99288561612268872933e-04, -+-3.97648005000088408580e-04, -+-3.95782088420835174210e-04, -+-3.93692127075682019467e-04, -+-3.91379562762282434078e-04, -+-3.88845962910724810089e-04, -+-3.86093019548719798301e-04, -+-3.83122548196679628581e-04, -+-3.79936486693416947905e-04, -+-3.76536893953195608929e-04, -+-3.72925948654929972394e-04, -+-3.69105947864348422904e-04, -+-3.65079305589995940784e-04, -+-3.60848551273959680056e-04, -+-3.56416328218264332091e-04, -+-3.51785391947902702746e-04, -+-3.46958608511509539966e-04, -+-3.41938952720719716982e-04, -+-3.36729506329282559166e-04, -+-3.31333456153044218079e-04, -+-3.25754092131937047095e-04, -+-3.19994805335147892728e-04, -+-3.14059085910667681873e-04, -+-3.07950520980461819095e-04, -+-3.01672792482518580589e-04, -+-2.95229674961088311026e-04, -+-2.88625033306340523283e-04, -+-2.81862820445018204176e-04, -+-2.74947074983157644778e-04, -+-2.67881918802505628041e-04, -+-2.60671554611964777660e-04, -+-2.53320263455520278562e-04, -+-2.45832402178220821125e-04, -+-2.38212400851451575621e-04, -+-2.30464760159363048859e-04, -+-2.22594048747734558165e-04, -+-2.14604900536931233329e-04, -+-2.06502012000535557258e-04, -+-1.98290139411133950476e-04, -+-1.89974096055152907262e-04, -+-1.81558749417992085131e-04, -+-1.73049018341384308823e-04, -+-1.64449870154523194316e-04, -+-1.55766317780646929318e-04, -+-1.47003416820761271481e-04, -+-1.38166262616194393661e-04, -+-1.29259987291687318631e-04, -+-1.20289756780731966232e-04, -+-1.11260767834878675090e-04, -+-1.02178245018739763763e-04, -+-9.30474376924268498914e-05, -+-8.38736169831565017523e-05, -+-7.46620727477739890053e-05, -+-6.54181105279376081448e-05, -+-5.61470484997162090244e-05, -+-4.68542144193485576007e-05, -+-3.75449425669173780990e-05, -+-2.82245706896867571811e-05, -+-1.88984369468525752515e-05, -+-9.57187685745089512619e-06, -+-2.50220253166946479370e-07, -+ 9.06121176221840221013e-06, -+ 1.83571098449908816895e-05, -+ 2.76321794336816537255e-05, -+ 3.68811437592135666556e-05, -+ 4.60987468417495339684e-05, -+ 5.52797564722329147621e-05, -+ 6.44189671769343854841e-05, -+ 7.35112031636342259672e-05, -+ 8.25513212473374231003e-05, -+ 9.15342137542006137590e-05, -+ 1.00454811401901069581e-04, -+ 1.09308086154850524381e-04, -+ 1.18089054052647829071e-04, -+ 1.26792778010161884652e-04, -+ 1.35414370587798690198e-04, -+ 1.43948996730092746744e-04, -+ 1.52391876471503188604e-04, -+ 1.60738287607595838752e-04, -+ 1.68983568330243670531e-04, -+ 1.77123119825359898573e-04, -+ 1.85152408831718565856e-04, -+ 1.93066970159443514676e-04, -+ 2.00862409166768096517e-04, -+ 2.08534404193699878438e-04, -+ 2.16078708951240975071e-04, -+ 2.23491154864851335540e-04, -+ 2.30767653370864866047e-04, -+ 2.37904198164594560738e-04, -+ 2.44896867398899378224e-04, -+ 2.51741825832007637496e-04, -+ 2.58435326923423880699e-04, -+ 2.64973714876783311267e-04, -+ 2.71353426628539464403e-04, -+ 2.77570993781410069266e-04, -+ 2.83623044481539374282e-04, -+ 2.89506305238360116608e-04, -+ 2.95217602686185913181e-04, -+ 3.00753865286583336493e-04, -+ 3.06112124970612023683e-04, -+ 3.11289518720129045667e-04, -+ 3.16283290087134808400e-04, -+ 3.21090790650627329848e-04, -+ 3.25709481409937177433e-04, -+ 3.30136934114071980105e-04, -+ 3.34370832526131541752e-04, -+ 3.38408973622323120626e-04, -+ 3.42249268724889273759e-04, -+ 3.45889744568388601224e-04, -+ 3.49328544298793523294e-04, -+ 3.52563928404906736999e-04, -+ 3.55594275581636054019e-04, -+ 3.58418083524750480211e-04, -+ 3.61033969656628290525e-04, -+ 3.63440671782813055999e-04, -+ 3.65637048678958849739e-04, -+ 3.67622080607960151355e-04, -+ 3.69394869767037141092e-04, -+ 3.70954640664598411879e-04, -+ 3.72300740426744327174e-04, -+ 3.73432639033317674820e-04, -+ 3.74349929483439925783e-04, -+ 3.75052327890526104696e-04, -+ 3.75539673506779519020e-04, -+ 3.75811928677284036969e-04, -+ 3.75869178723718091930e-04, -+ 3.75711631757917824750e-04, -+ 3.75339618425418329768e-04, -+ 3.74753591579224973156e-04, -+ 3.73954125884068270050e-04, -+ 3.72941917351453974382e-04, -+ 3.71717782805840797795e-04, -+ 3.70282659282345936666e-04, -+ 3.68637603356378044158e-04, -+ 3.66783790405674587840e-04, -+ 3.64722513805233164354e-04, -+ 3.62455184055677408564e-04, -+ 3.59983327845599923502e-04, -+ 3.57308587048594551976e-04, -+ 3.54432717655444305162e-04, -+ 3.51357588642338164626e-04, -+ 3.48085180775715128960e-04, -+ 3.44617585354531092562e-04, -+ 3.40957002890739319448e-04, -+ 3.37105741728795874762e-04, -+ 3.33066216605056779430e-04, -+ 3.28840947147959132123e-04, -+ 3.24432556319903108322e-04, -+ 3.19843768801808070543e-04, -+ 3.15077409321264686852e-04, -+ 3.10136400925462669617e-04, -+ 3.05023763199732222788e-04, -+ 2.99742610432934862910e-04, -+ 2.94296149730754368415e-04, -+ 2.88687679078032178367e-04, -+ 2.82920585351309613817e-04, -+ 2.76998342282779573022e-04, -+ 2.70924508376842870794e-04, -+ 2.64702724780600893301e-04, -+ 2.58336713109347953805e-04, -+ 2.51830273228646013463e-04, -+ 2.45187280994006067195e-04, -+ 2.38411685949818300109e-04, -+ 2.31507508988586837694e-04, -+ 2.24478839972069534785e-04, -+ 2.17329835315641735263e-04, -+ 2.10064715537319865631e-04, -+ 2.02687762772885523210e-04, -+ 1.95203318258571319535e-04, -+ 1.87615779782783292061e-04, -+ 1.79929599108352478208e-04, -+ 1.72149279366823641443e-04, -+ 1.64279372426300712944e-04, -+ 1.56324476234388271998e-04, -+ 1.48289232137772291394e-04, -+ 1.40178322180001724197e-04, -+ 1.31996466379041452969e-04, -+ 1.23748419986174359531e-04, -+ 1.15438970727843310919e-04, -+ 1.07072936032028641199e-04, -+ 9.86551602407646912674e-05, -+ 9.01905118104061922493e-05, -+ 8.16838805012586526922e-05, -+ 7.31401745581928999611e-05, -+ 6.45643178838649969007e-05, -+ 5.59612472061890399498e-05, -+ 4.73359092415654616050e-05, -+ 3.86932578557977460893e-05, -+ 3.00382512239181022112e-05, -+ 2.13758489908508619718e-05, -+ 1.27110094344164514346e-05, -+ 4.04868663231493498654e-06, -+-4.60617236531486804862e-06, -+-1.32486303560268950814e-05, -+-2.18737627965935988274e-05, -+-3.04766606039162663141e-05, -+-3.90524329440386771335e-05, -+-4.75962100075382721592e-05, -+-5.61031457698656416577e-05, -+-6.45684207347658160750e-05, -+-7.29872446596370569490e-05, -+-8.13548592609855323026e-05, -+-8.96665408985710283294e-05, -+-9.79176032367135154100e-05, -+-1.06103399881264301701e-04, -+-1.14219326990759500518e-04, -+-1.22260825860294306986e-04, -+-1.30223385476667787367e-04, -+-1.38102545043372279022e-04, -+-1.45893896474014590726e-04, -+-1.53593086852781251627e-04, -+-1.61195820860575358014e-04, -+-1.68697863165478154166e-04, -+-1.76095040776206332271e-04, -+-1.83383245357263575124e-04, -+-1.90558435504502971490e-04, -+-1.97616638979844499871e-04, -+-2.04553954903916496199e-04, -+-2.11366555905413412665e-04, -+-2.18050690225988521003e-04, -+-2.24602683779532712486e-04, -+-2.31018942164689760873e-04, -+-2.37295952629612913335e-04, -+-2.43430285987647672136e-04, -+-2.49418598483226250720e-04, -+-2.55257633606716517576e-04, -+-2.60944223857345624935e-04, -+-2.66475292453244793581e-04, -+-2.71847854987617462523e-04, -+-2.77059021030343338027e-04, -+-2.82105995673898740650e-04, -+-2.86986081022970918215e-04, -+-2.91696677626899613517e-04, -+-2.96235285854203533526e-04, -+-3.00599507208460371525e-04, -+-3.04787045584920001685e-04, -+-3.08795708467034170797e-04, -+-3.12623408062509989137e-04, -+-3.16268162378132073644e-04, -+-3.19728096232883450198e-04, -+-3.23001442208842737963e-04, -+-3.26086541539376013193e-04, -+-3.28981844934199483665e-04, -+-3.31685913340901627425e-04, -+-3.34197418642568527033e-04, -+-3.36515144291180958672e-04, -+-3.38637985876496302052e-04, -+-3.40564951630163302489e-04, -+-3.42295162864854200010e-04, -+-3.43827854348234302102e-04, -+-3.45162374611635318009e-04, -+-3.46298186193322516443e-04, -+-3.47234865816296292464e-04, -+-3.47972104500599249514e-04, -+-3.48509707610135627091e-04, -+-3.48847594834057013122e-04, -+-3.48985800102794084098e-04, -+-3.48924471438857429929e-04, -+-3.48663870742568846994e-04, -+-3.48204373512918418428e-04, -+-3.47546468503779780370e-04, -+-3.46690757315755763122e-04, -+-3.45637953923957387536e-04, -+-3.44388884142068690732e-04, -+-3.42944485023055438931e-04, -+-3.41305804196959756622e-04, -+-3.39473999146208769290e-04, -+-3.37450336418937347962e-04, -+-3.35236190780833392174e-04, -+-3.32833044306071442267e-04, -+-3.30242485407915102851e-04, -+-3.27466207809625300430e-04, -+-3.24506009456285323105e-04, -+-3.21363791368333459424e-04, -+-3.18041556437396186544e-04, -+-3.14541408165269157499e-04, -+-3.10865549346798478083e-04, -+-3.07016280697481171256e-04, -+-3.02995999426636253033e-04, -+-2.98807197757022834691e-04, -+-2.94452461391812403239e-04, -+-2.89934467929851976634e-04, -+-2.85255985230187464677e-04, -+-2.80419869726833046429e-04, -+-2.75429064694814387804e-04, -+-2.70286598468527671825e-04, -+-2.64995582613490349589e-04, -+-2.59559210052583209764e-04, -+-2.53980753147903693268e-04, -+-2.48263561739382960028e-04, -+-2.42411061141333119629e-04, -+-2.36426750098121530837e-04, -+-2.30314198700187072744e-04, -+-2.24077046261636817458e-04, -+-2.17718999160677065480e-04, -+-2.11243828644175747709e-04, -+-2.04655368597559766909e-04, -+-1.97957513281590559125e-04, -+-1.91154215037028974876e-04, -+-1.84249481958865466954e-04, -+-1.77247375541147338725e-04, -+-1.70152008294119155233e-04, -+-1.62967541334830558729e-04, -+-1.55698181952718529668e-04, -+-1.48348181151564014997e-04, -+-1.40921831169260738459e-04, -+-1.33423462976836989169e-04, -+-1.25857443758204442640e-04, -+-1.18228174371988047249e-04, -+-1.10540086797179302569e-04, -+-1.02797641563733886216e-04, -+-9.50053251698690202779e-05, -+-8.71676474874451848130e-05, -+-7.92891391569480421435e-05, -+-7.13743489735723545724e-05, -+-6.34278412659133373520e-05, -+-5.54541932687728470635e-05, -+-4.74579924915896622650e-05, -+-3.94438340839858202430e-05, -+-3.14163182000519927554e-05, -+-2.33800473626161515084e-05, -+-1.53396238292672757364e-05, -+-7.29964696164099043725e-06, -+ 7.35289400800058785423e-07, -+ 8.76059956072690135676e-06, -+ 1.67717085752691440334e-05, -+ 2.47640548591994233581e-05, -+ 3.27330927774992179306e-05, -+ 4.06742952258349121995e-05, -+ 4.85831561974826067188e-05, -+ 5.64551933352481954465e-05, -+ 6.42859504669411802903e-05, -+ 7.20710001229515570022e-05, -+ 7.98059460346407204163e-05, -+ 8.74864256117493171517e-05, -+ 9.51081123980788522947e-05, -+ 1.02666718503417308400e-04, -+ 1.10157997010735983186e-04, -+ 1.17577744357177826798e-04, -+ 1.24921802687524364020e-04, -+ 1.32186062178827283932e-04, -+ 1.39366463334907178051e-04, -+ 1.46458999249442900882e-04, -+ 1.53459717836390693510e-04, -+ 1.60364724026482917364e-04, -+ 1.67170181928681389327e-04, -+ 1.73872316955147449263e-04, -+ 1.80467417908883949636e-04, -+ 1.86951839032647022755e-04, -+ 1.93322002018104301428e-04, -+ 1.99574397974115166953e-04, -+ 2.05705589353056221948e-04, -+ 2.11712211834139661399e-04, -+ 2.17590976162706123713e-04, -+ 2.23338669944412427466e-04, -+ 2.28952159393546036611e-04, -+ 2.34428391034224761335e-04, -+ 2.39764393353856245438e-04, -+ 2.44957278407680664051e-04, -+ 2.50004243373813900102e-04, -+ 2.54902572057763023537e-04, -+ 2.59649636345685814673e-04, -+ 2.64242897605613895860e-04, -+ 2.68679908035895302198e-04, -+ 2.72958311960145715448e-04, -+ 2.77075847068031439532e-04, -+ 2.81030345601230668959e-04, -+ 2.84819735483968607473e-04, -+ 2.88442041397530505187e-04, -+ 2.91895385798214199429e-04, -+ 2.95177989878195508062e-04, -+ 2.98288174468830185292e-04, -+ 3.01224360885935828203e-04, -+ 3.03985071716642170879e-04, -+ 3.06568931547421675947e-04, -+ 3.08974667632958628800e-04, -+ 3.11201110505533425424e-04, -+ 3.13247194524650732217e-04, -+ 3.15111958366658898717e-04, -+ 3.16794545454155058485e-04, -+ 3.18294204324996645328e-04, -+ 3.19610288940773337035e-04, -+ 3.20742258934658165670e-04, -+ 3.21689679798506877016e-04, -+ 3.22452223009245763068e-04, -+ 3.23029666094488715922e-04, -+ 3.23421892637434677410e-04, -+ 3.23628892221117367076e-04, -+ 3.23650760312099662532e-04, -+ 3.23487698083753741091e-04, -+ 3.23140012179301756075e-04, -+ 3.22608114414811391040e-04, -+ 3.21892521422396742613e-04, -+ 3.20993854233888264126e-04, -+ 3.19912837805281418183e-04, -+ 3.18650300482314343883e-04, -+ 3.17207173407532596471e-04, -+ 3.15584489869251980446e-04, -+ 3.13783384592866167444e-04, -+ 3.11805092974967040537e-04, -+ 3.09650950260776226895e-04, -+ 3.07322390665431383582e-04, -+ 3.04820946439691672133e-04, -+ 3.02148246880660359404e-04, -+ 2.99306017288154683001e-04, -+ 2.96296077867383965149e-04, -+ 2.93120342578621461815e-04, -+ 2.89780817934593706246e-04, -+ 2.86279601746334145390e-04, -+ 2.82618881818277357942e-04, -+ 2.78800934593397952560e-04, -+ 2.74828123749229578238e-04, -+ 2.70702898745622138645e-04, -+ 2.66427793325122298871e-04, -+ 2.62005423966893218578e-04, -+ 2.57438488295109720125e-04, -+ 2.52729763442789332178e-04, -+ 2.47882104372053313750e-04, -+ 2.42898442151831685893e-04, -+ 2.37781782193984719039e-04, -+ 2.32535202449068816293e-04, -+ 2.27161851562591142212e-04, -+ 2.21664946993031298540e-04, -+ 2.16047773092666164701e-04, -+ 2.10313679152429068835e-04, -+ 2.04466077411766494580e-04, -+ 1.98508441034933119868e-04, -+ 1.92444302054725852134e-04, -+ 1.86277249284949120503e-04, -+ 1.80010926202826978225e-04, -+ 1.73649028802625680088e-04, -+ 1.67195303421656588962e-04, -+ 1.60653544540157914395e-04, -+ 1.54027592556047951671e-04, -+ 1.47321331536073504842e-04, -+ 1.40538686944578018788e-04, -+ 1.33683623351231527059e-04, -+ 1.26760142119053490503e-04, -+ 1.19772279074078399062e-04, -+ 1.12724102158015825103e-04, -+ 1.05619709065267838215e-04, -+ 9.84632248656736166819e-05, -+ 9.12587996143574470059e-05, -+ 8.40106059500621168935e-05, -+ 7.67228366833554533723e-05, -+ 6.93997023760999396736e-05, -+ 6.20454289135817277541e-05, -+ 5.46642550706949160956e-05, -+ 4.72604300735806080519e-05, -+ 3.98382111581210927170e-05, -+ 3.24018611266886229260e-05, -+ 2.49556459045488985800e-05, -+ 1.75038320973170900537e-05, -+ 1.00506845508623119789e-05, -+ 2.60046391505357440467e-06, -+-4.84257578724628453024e-06, -+-1.22741895846601957513e-05, -+-1.96901439736055691699e-05, -+-2.70862193254132534745e-05, -+-3.44582122826427863452e-05, -+-4.18019381432365520865e-05, -+-4.91132332314092313582e-05, -+-5.63879572535800466628e-05, -+-6.36219956382819091861e-05, -+-7.08112618586212363026e-05, -+-7.79516997359988795179e-05, -+-8.50392857237956806661e-05, -+-9.20700311697229486791e-05, -+-9.90399845556698052700e-05, -+-1.05945233713539423387e-04, -+-1.12781908016172197095e-04, -+-1.19546180541878292172e-04, -+-1.26234270211473149090e-04, -+-1.32842443896610563079e-04, -+-1.39367018498237036110e-04, -+-1.45804362994017441780e-04, -+-1.52150900453594729216e-04, -+-1.58403110020568740251e-04, -+-1.64557528860099149893e-04, -+-1.70610754071058763354e-04, -+-1.76559444561685330907e-04, -+-1.82400322887701021131e-04, -+-1.88130177051889265882e-04, -+-1.93745862264151107917e-04, -+-1.99244302661073536273e-04, -+-2.04622492984076230016e-04, -+-2.09877500215226739464e-04, -+-2.15006465169834002022e-04, -+-2.20006604044963781320e-04, -+-2.24875209923037860070e-04, -+-2.29609654229712996506e-04, -+-2.34207388145253733377e-04, -+-2.38665943968643126617e-04, -+-2.42982936433764040154e-04, -+-2.47156063976803242084e-04, -+-2.51183109954370624526e-04, -+-2.55061943811678553534e-04, -+-2.58790522200035065601e-04, -+-2.62366890043213652015e-04, -+-2.65789181552087544740e-04, -+-2.69055621187019552206e-04, -+-2.72164524567514133028e-04, -+-2.75114299328679378503e-04, -+-2.77903445924066144594e-04, -+-2.80530558374482365432e-04, -+-2.82994324962458426113e-04, -+-2.85293528871928667081e-04, -+-2.87427048772961131386e-04, -+-2.89393859351164052952e-04, -+-2.91193031781574363133e-04, -+-2.92823734146810019888e-04, -+-2.94285231799317132436e-04, -+-2.95576887667566815150e-04, -+-2.96698162506095247833e-04, -+-2.97648615089306386138e-04, -+-2.98427902348986473068e-04, -+-2.99035779455541356198e-04, -+-2.99472099842951298022e-04, -+-2.99736815177487569105e-04, -+-2.99829975270314748326e-04, -+-2.99751727934055112266e-04, -+-2.99502318783477473017e-04, -+-2.99082090980496079820e-04, -+-2.98491484923676638277e-04, -+-2.97731037882504939382e-04, -+-2.96801383576682481068e-04, -+-2.95703251700761983022e-04, -+-2.94437467394450386442e-04, -+-2.93004950658959568456e-04, -+-2.91406715719765864719e-04, -+-2.89643870336288734163e-04, -+-2.87717615058818976508e-04, -+-2.85629242433306474672e-04, -+-2.83380136154447051858e-04, -+-2.80971770167645455707e-04, -+-2.78405707720416845195e-04, -+-2.75683600363831927699e-04, -+-2.72807186904635450876e-04, -+-2.69778292308697948982e-04, -+-2.66598826556476689500e-04, -+-2.63270783451207898707e-04, -+-2.59796239380568065765e-04, -+-2.56177352032518543517e-04, -+-2.52416359066249054721e-04, -+-2.48515576738865041385e-04, -+-2.44477398488780056640e-04, -+-2.40304293476628925757e-04, -+-2.35998805084586303973e-04, -+-2.31563549375006809058e-04, -+-2.27001213509300385799e-04, -+-2.22314554128057417478e-04, -+-2.17506395693240964359e-04, -+-2.12579628793644199699e-04, -+-2.07537208414486720482e-04, -+-2.02382152172165928486e-04, -+-1.97117538515386705664e-04, -+-1.91746504893500153760e-04, -+-1.86272245893312135556e-04, -+-1.80698011345398386069e-04, -+-1.75027104401053194751e-04, -+-1.69262879581007170742e-04, -+-1.63408740797064619410e-04, -+-1.57468139347822794899e-04, -+-1.51444571889650255424e-04, -+-1.45341578384115073432e-04, -+-1.39162740023062326405e-04, -+-1.32911677132557424445e-04, -+-1.26592047056915218929e-04, -+-1.20207542024052590340e-04, -+-1.13761886993405384643e-04, -+-1.07258837487659783316e-04, -+-1.00702177409562164813e-04, -+-9.40957168450681270561e-05, -+-8.74432898541086471968e-05, -+-8.07487522502475194583e-05, -+-7.40159793705156095938e-05, -+-6.72488638367082234085e-05, -+-6.04513133094537063756e-05, -+-5.36272482362472248819e-05, -+-4.67805995949890251378e-05, -+-3.99153066340006816592e-05, -+-3.30353146100565781473e-05, -+-2.61445725256313035213e-05, -+-1.92470308666743191849e-05, -+-1.23466393421882220175e-05, -+-5.44734462700067394256e-06, -+ 1.44691189122907742152e-06, -+ 8.33219635915731991185e-06, -+ 1.52045846980238205263e-05, -+ 2.20601648356691710140e-05, -+ 2.88950389290342959231e-05, -+ 3.57053255759800123258e-05, -+ 4.24871620149298346875e-05, -+ 4.92367063114172048323e-05, -+ 5.59501395300588034607e-05, -+ 6.26236678908249482520e-05, -+ 6.92535249083772849656e-05, -+ 7.58359735132689484916e-05, -+ 8.23673081538160148027e-05, -+ 8.88438568774603065845e-05, -+ 9.52619833904571407419e-05, -+ 1.01618089094736445996e-04, -+ 1.07908615100796547912e-04, -+ 1.14130044215511548540e-04, -+ 1.20278902903740668169e-04, -+ 1.26351763222651335486e-04, -+ 1.32345244727680633103e-04, -+ 1.38256016349078191072e-04, -+ 1.44080798237992946907e-04, -+ 1.49816363581082602745e-04, -+ 1.55459540382645440516e-04, -+ 1.61007213213293658063e-04, -+ 1.66456324924208517568e-04, -+ 1.71803878326033914858e-04, -+ 1.77046937831481864629e-04, -+ 1.82182631060826721089e-04, -+ 1.87208150409221387497e-04, -+ 1.92120754575244299164e-04, -+ 1.96917770049651416229e-04, -+ 2.01596592563618655673e-04, -+ 2.06154688495617809162e-04, -+ 2.10589596236331749735e-04, -+ 2.14898927510659952262e-04, -+ 2.19080368656271521873e-04, -+ 2.23131681857964108947e-04, -+ 2.27050706337181441982e-04, -+ 2.30835359496065032096e-04, -+ 2.34483638015429345178e-04, -+ 2.37993618906142247269e-04, -+ 2.41363460513226320541e-04, -+ 2.44591403472347386668e-04, -+ 2.47675771618061590050e-04, -+ 2.50614972843412405108e-04, -+ 2.53407499910435565511e-04, -+ 2.56051931211167507936e-04, -+ 2.58546931478778998018e-04, -+ 2.60891252448485638522e-04, -+ 2.63083733467921166392e-04, -+ 2.65123302056677822517e-04, -+ 2.67008974414759331969e-04, -+ 2.68739855879716155965e-04, -+ 2.70315141332255878728e-04, -+ 2.71734115550168267312e-04, -+ 2.72996153510415167677e-04, -+ 2.74100720639277955180e-04, -+ 2.75047373010480411190e-04, -+ 2.75835757491237044091e-04, -+ 2.76465611836200725413e-04, -+ 2.76936764729322759931e-04, -+ 2.77249135773662686282e-04, -+ 2.77402735429210095530e-04, -+ 2.77397664898823418430e-04, -+ 2.77234115962408846773e-04, -+ 2.76912370759493020253e-04, -+ 2.76432801520381165802e-04, -+ 2.75795870246112379866e-04, -+ 2.75002128337457571201e-04, -+ 2.74052216173225097421e-04, -+ 2.72946862638190302849e-04, -+ 2.71686884600967171015e-04, -+ 2.70273186342183185330e-04, -+ 2.68706758933346897579e-04, -+ 2.66988679566817544743e-04, -+ 2.65120110837324977557e-04, -+ 2.63102299975484803154e-04, -+ 2.60936578033862389640e-04, -+ 2.58624359026030797588e-04, -+ 2.56167139019227189586e-04, -+ 2.53566495181161690939e-04, -+ 2.50824084781579728989e-04, -+ 2.47941644149205875185e-04, -+ 2.44920987584716133307e-04, -+ 2.41764006230414186041e-04, -+ 2.38472666897310341073e-04, -+ 2.35049010850323818796e-04, -+ 2.31495152552345612000e-04, -+ 2.27813278367987374863e-04, -+ 2.24005645227630785727e-04, -+ 2.20074579252881860408e-04, -+ 2.16022474343967573742e-04, -+ 2.11851790730109416395e-04, -+ 2.07565053483680750195e-04, -+ 2.03164850999056984188e-04, -+ 1.98653833437066455227e-04, -+ 1.94034711135973993255e-04, -+ 1.89310252989946878202e-04, -+ 1.84483284795969022882e-04, -+ 1.79556687570185045640e-04, -+ 1.74533395834689777828e-04, -+ 1.69416395875703968332e-04, -+ 1.64208723974330704888e-04, -+ 1.58913464610781706397e-04, -+ 1.53533748643116163459e-04, -+ 1.48072751461745600373e-04, -+ 1.42533691120615488420e-04, -+ 1.36919826446232244851e-04, -+ 1.31234455125635378044e-04, -+ 1.25480911774428335794e-04, -+ 1.19662565986003067314e-04, -+ 1.13782820363092171140e-04, -+ 1.07845108532812357350e-04, -+ 1.01852893146268084785e-04, -+ 9.58096638640913071758e-05, -+ 8.97189353288038125020e-05, -+ 8.35842451253892703041e-05, -+ 7.74091517311708171871e-05, -+ 7.11972324561945549498e-05, -+ 6.49520813753084395436e-05, -+ 5.86773072531284785184e-05, -+ 5.23765314630894333252e-05, -+ 4.60533859017605735615e-05, -+ 3.97115108997169615726e-05, -+ 3.33545531299399012877e-05, -+ 2.69861635152601212417e-05, -+ 2.06099951357281601966e-05, -+ 1.42297011374239464445e-05, -+ 7.84893264358421670118e-06, -+ 1.47133666946563786569e-06, -+-4.89944595795788563131e-06, -+-1.12597826742650033679e-05, -+-1.76060512446440944824e-05, -+-2.39346418225641322213e-05, -+-3.02419589988916038355e-05, -+-3.65244238402926538526e-05, -+-4.27784759157675114065e-05, -+-4.90005753101717809908e-05, -+-5.51872046235883968062e-05, -+-6.13348709554239443801e-05, -+-6.74401078721121943153e-05, -+-7.34994773573187349476e-05, -+-7.95095717435526355005e-05, -+-8.54670156241022589347e-05, -+-9.13684677442247916886e-05, -+-9.72106228705329827259e-05, -+-1.02990213637535249144e-04, -+-1.08704012370301582183e-04, -+-1.14348832882239030933e-04, -+-1.19921532246967561266e-04, -+-1.25419012543391523258e-04, -+-1.30838222572801670578e-04, -+-1.36176159547326554701e-04, -+-1.41429870748598893225e-04, -+-1.46596455155808636037e-04, -+-1.51673065042229072161e-04, -+-1.56656907539345593332e-04, -+-1.61545246167741111346e-04, -+-1.66335402333829893021e-04, -+-1.71024756791804714243e-04, -+-1.75610751069764359483e-04, -+-1.80090888859417295109e-04, -+-1.84462737368601463689e-04, -+-1.88723928635743296543e-04, -+-1.92872160805764557030e-04, -+-1.96905199366593993164e-04, -+-2.00820878345682555252e-04, -+-2.04617101465884017146e-04, -+-2.08291843260079455108e-04, -+-2.11843150143963964045e-04, -+-2.15269141446432097026e-04, -+-2.18568010397017243587e-04, -+-2.21738025069880467571e-04, -+-2.24777529283855221449e-04, -+-2.27684943458087584887e-04, -+-2.30458765422837560640e-04, -+-2.33097571185028482272e-04, -+-2.35600015648165144258e-04, -+-2.37964833286258476731e-04, -+-2.40190838771433997885e-04, -+-2.42276927554912959329e-04, -+-2.44222076401095133848e-04, -+-2.46025343874493635128e-04, -+-2.47685870779298261159e-04, -+-2.49202880551373695713e-04, -+-2.50575679602528446788e-04, -+-2.51803657616905742379e-04, -+-2.52886287799411761581e-04, -+-2.53823127076041447393e-04, -+-2.54613816246114423730e-04, -+-2.55258080086343225150e-04, -+-2.55755727406747662873e-04, -+-2.56106651058446010017e-04, -+-2.56310827893362850466e-04, -+-2.56368318675959138472e-04, -+-2.56279267947061176278e-04, -+-2.56043903839951736412e-04, -+-2.55662537848869153827e-04, -+-2.55135564550115290575e-04, -+-2.54463461275976690883e-04, -+-2.53646787741720056760e-04, -+-2.52686185625914012682e-04, -+-2.51582378104383988602e-04, -+-2.50336169338122934043e-04, -+-2.48948443915500688007e-04, -+-2.47420166249151312829e-04, -+-2.45752379927938354159e-04, -+-2.43946207024417992780e-04, -+-2.42002847358256754223e-04, -+-2.39923577716073371238e-04, -+-2.37709751028206703414e-04, -+-2.35362795502931025464e-04, -+-2.32884213718665853896e-04, -+-2.30275581674753719499e-04, -+-2.27538547801391219296e-04, -+-2.24674831929338742875e-04, -+-2.21686224220039661921e-04, -+-2.18574584056813192318e-04, -+-2.15341838897799910417e-04, -+-2.11989983091363462259e-04, -+-2.08521076654672306251e-04, -+-2.04937244016203435910e-04, -+-2.01240672722932391033e-04, -+-1.97433612112999371446e-04, -+-1.93518371954601639930e-04, -+-1.89497321052062165161e-04, -+-1.85372885819735596941e-04, -+-1.81147548824731936421e-04, -+-1.76823847299330738289e-04, -+-1.72404371623836980172e-04, -+-1.67891763780981287087e-04, -+-1.63288715782630906338e-04, -+-1.58597968069809712021e-04, -+-1.53822307886959517469e-04, -+-1.48964567631409072149e-04, -+-1.44027623179032189917e-04, -+-1.39014392187015984161e-04, -+-1.33927832374908250841e-04, -+-1.28770939784726684953e-04, -+-1.23546747021317972074e-04, -+-1.18258321473934703560e-04, -+-1.12908763520077224328e-04, -+-1.07501204712651167732e-04, -+-1.02038805951497883089e-04, -+-9.65247556403633775101e-05, -+-9.09622678303766927241e-05, -+-8.53545803511158610944e-05, -+-7.97049529303493834971e-05, -+-7.40166653035361572950e-05, -+-6.82930153141845771095e-05, -+-6.25373170061634808944e-05, -+-5.67528987090696620090e-05, -+-5.09431011177533815009e-05, -+-4.51112753671087087165e-05, -+-3.92607811032360062451e-05, -+-3.33949845520835634973e-05, -+-2.75172565866769451451e-05, -+-2.16309707940438413821e-05, -+-1.57395015429393948119e-05, -+-9.84622205347808669251e-06, -+-3.95450246978667291299e-06, -+ 1.93229206330573338499e-06, -+ 7.81080331823583281971e-06, -+ 1.36776818965353001598e-05, -+ 1.95295891331412940274e-05, -+ 2.53631989924010254722e-05, -+ 3.11751999544031924995e-05, -+ 3.69622968907776241966e-05, -+ 4.27212129288199275452e-05, -+ 4.84486913029018664584e-05, -+ 5.41414971921248957621e-05, -+ 5.97964195431813658947e-05, -+ 6.54102728773860912868e-05, -+ 7.09798990809431715968e-05, -+ 7.65021691772440931741e-05, -+ 8.19739850804731076412e-05, -+ 8.73922813293384121618e-05, -+ 9.27540268000407564604e-05, -+ 9.80562263975138116018e-05, -+ 1.03295922723993288585e-04, -+ 1.08470197723987624161e-04, -+ 1.13576174304741347185e-04, -+ 1.18611017931288513657e-04, -+ 1.23571938195231626964e-04, -+ 1.28456190356295279348e-04, -+ 1.33261076856053907241e-04, -+ 1.37983948802590338087e-04, -+ 1.42622207425680382412e-04, -+ 1.47173305501465306920e-04, -+ 1.51634748745910018621e-04, -+ 1.56004097176282787189e-04, -+ 1.60278966439910032374e-04, -+ 1.64457029109492771420e-04, -+ 1.68536015944279398771e-04, -+ 1.72513717116415843562e-04, -+ 1.76387983401819222569e-04, -+ 1.80156727334917880767e-04, -+ 1.83817924326707803767e-04, -+ 1.87369613745391966429e-04, -+ 1.90809899959169668648e-04, -+ 1.94136953340610880553e-04, -+ 1.97349011231975375721e-04, -+ 2.00444378871088047271e-04, -+ 2.03421430277243321921e-04, -+ 2.06278609096683117384e-04, -+ 2.09014429407214987486e-04, -+ 2.11627476481567565469e-04, -+ 2.14116407509085294883e-04, -+ 2.16479952275410651545e-04, -+ 2.18716913799805800578e-04, -+ 2.20826168929834235413e-04, -+ 2.22806668893034610273e-04, -+ 2.24657439805431047601e-04, -+ 2.26377583136560162113e-04, -+ 2.27966276130837073623e-04, -+ 2.29422772185062839910e-04, -+ 2.30746401181916479780e-04, -+ 2.31936569779289853983e-04, -+ 2.32992761655362052436e-04, -+ 2.33914537709302807530e-04, -+ 2.34701536217598021733e-04, -+ 2.35353472945890507175e-04, -+ 2.35870141216392695174e-04, -+ 2.36251411930833043378e-04, -+ 2.36497233549024313271e-04, -+ 2.36607632023086867507e-04, -+ 2.36582710687435922303e-04, -+ 2.36422650104641229310e-04, -+ 2.36127707867309972372e-04, -+ 2.35698218356151145605e-04, -+ 2.35134592454421556497e-04, -+ 2.34437317218964954776e-04, -+ 2.33606955508089235429e-04, -+ 2.32644145566544174094e-04, -+ 2.31549600567894977307e-04, -+ 2.30324108114598991807e-04, -+ 2.28968529696129264976e-04, -+ 2.27483800105504667616e-04, -+ 2.25870926814611687646e-04, -+ 2.24130989308722247937e-04, -+ 2.22265138380645918331e-04, -+ 2.20274595384963348642e-04, -+ 2.18160651452820167134e-04, -+ 2.15924666667776987477e-04, -+ 2.13568069203236673070e-04, -+ 2.11092354421993914264e-04, -+ 2.08499083938437130724e-04, -+ 2.05789884644064712763e-04, -+ 2.02966447696813575728e-04, -+ 2.00030527474900313590e-04, -+ 1.96983940495784002342e-04, -+ 1.93828564300923292208e-04, -+ 1.90566336307002704526e-04, -+ 1.87199252624317116680e-04, -+ 1.83729366843086441233e-04, -+ 1.80158788788307001969e-04, -+ 1.76489683244053914514e-04, -+ 1.72724268647881387890e-04, -+ 1.68864815756162396296e-04, -+ 1.64913646281104273863e-04, -+ 1.60873131500388584026e-04, -+ 1.56745690840089552413e-04, -+ 1.52533790431842698147e-04, -+ 1.48239941645072722306e-04, -+ 1.43866699595155821557e-04, -+ 1.39416661628403223006e-04, -+ 1.34892465784759241557e-04, -+ 1.30296789239119602255e-04, -+ 1.25632346722192602372e-04, -+ 1.20901888921826961877e-04, -+ 1.16108200865747232967e-04, -+ 1.11254100286645201583e-04, -+ 1.06342435970584441723e-04, -+ 1.01376086089681932472e-04, -+ 9.63579565200426416864e-05, -+ 9.12909791459249860338e-05, -+ 8.61781101511258242455e-05, -+ 8.10223282985787361839e-05, -+ 7.58266331991632841188e-05, -+ 7.05940435707285904570e-05, -+ 6.53275954883418709775e-05, -+ 6.00303406267707601431e-05, -+ 5.47053444962296712734e-05, -+ 4.93556846723300390086e-05, -+ 4.39844490214451387493e-05, -+ 3.85947339222574980089e-05, -+ 3.31896424847004075168e-05, -+ 2.77722827672396915886e-05, -+ 2.23457659935181742969e-05, -+ 1.69132047694604267319e-05, -+ 1.14777113016647637858e-05, -+ 6.04239561835710224983e-06, -+ 6.10363793728645020518e-07, -+-4.81528382325380808311e-06, -+-1.02314543745700456363e-05, -+-1.56350642523847494154e-05, -+-2.10230408508807413534e-05, -+-2.63923243095009231191e-05, -+-3.17398692468697033722e-05, -+-3.70626464842205185883e-05, -+-4.23576447574330595914e-05, -+-4.76218724167029767991e-05, -+-5.28523591128858801825e-05, -+-5.80461574695681123935e-05, -+-6.32003447399251964056e-05, -+-6.83120244474383017403e-05, -+-7.33783280095512028618e-05, -+-7.83964163433584703636e-05, -+-8.33634814524302451963e-05, -+-8.82767479938875655916e-05, -+-9.31334748248567243206e-05, -+-9.79309565274441714503e-05, -+-1.02666524911384672157e-04, -+-1.07337550493532478228e-04, -+-1.11941443953376520482e-04, -+-1.16475657563775984358e-04, -+-1.20937686596131455368e-04, -+-1.25325070699215711592e-04, -+-1.29635395250910385187e-04, -+-1.33866292682098157263e-04, -+-1.38015443772047713324e-04, -+-1.42080578914434722728e-04, -+-1.46059479353512834980e-04, -+-1.49949978389612786304e-04, -+-1.53749962553389324382e-04, -+-1.57457372748113794830e-04, -+-1.61070205359542604606e-04, -+-1.64586513332575895248e-04, -+-1.68004407214276350055e-04, -+-1.71322056162632199933e-04, -+-1.74537688920543577207e-04, -+-1.77649594754509306677e-04, -+-1.80656124357563160031e-04, -+-1.83555690715879498342e-04, -+-1.86346769938744346575e-04, -+-1.89027902051352861886e-04, -+-1.91597691750067656950e-04, -+-1.94054809119746906601e-04, -+-1.96397990312779409513e-04, -+-1.98626038189485975725e-04, -+-2.00737822919565348781e-04, -+-2.02732282544295099209e-04, -+-2.04608423499208415697e-04, -+-2.06365321097002875567e-04, -+-2.08002119970448036889e-04, -+-2.09518034475094608749e-04, -+-2.10912349051600370295e-04, -+-2.12184418547517878980e-04, -+-2.13333668498409933503e-04, -+-2.14359595368183043079e-04, -+-2.15261766748550323726e-04, -+-2.16039821517564244657e-04, -+-2.16693469957175179064e-04, -+-2.17222493829804320963e-04, -+-2.17626746413933055187e-04, -+-2.17906152498744288149e-04, -+-2.18060708337866669768e-04, -+-2.18090481562302831997e-04, -+-2.17995611052633665597e-04, -+-2.17776306770636030692e-04, -+-2.17432849550450564774e-04, -+-2.16965590849471163170e-04, -+-2.16374952459152508069e-04, -+-2.15661426175948502115e-04, -+-2.14825573432618965528e-04, -+-2.13868024890168464437e-04, -+-2.12789479990694880424e-04, -+-2.11590706471458399373e-04, -+-2.10272539840493795068e-04, -+-2.08835882814101080193e-04, -+-2.07281704716627822619e-04, -+-2.05611040842872101015e-04, -+-2.03824991783563389154e-04, -+-2.01924722714337458607e-04, -+-1.99911462648656409243e-04, -+-1.97786503655151527006e-04, -+-1.95551200039875640226e-04, -+-1.93206967493983087581e-04, -+-1.90755282207361699176e-04, -+-1.88197679948765912066e-04, -+-1.85535755113050746619e-04, -+-1.82771159736013454056e-04, -+-1.79905602477525801202e-04, -+-1.76940847573584393148e-04, -+-1.73878713757827938272e-04, -+-1.70721073153264649115e-04, -+-1.67469850134842302650e-04, -+-1.64127020163558210364e-04, -+-1.60694608592805399886e-04, -+-1.57174689447680583382e-04, -+-1.53569384177978999996e-04, -+-1.49880860385627755508e-04, -+-1.46111330527314676282e-04, -+-1.42263050593096474329e-04, -+-1.38338318761709250845e-04, -+-1.34339474033567067698e-04, -+-1.30268894841948973309e-04, -+-1.26128997643502378410e-04, -+-1.21922235488716284571e-04, -+-1.17651096573263047097e-04, -+-1.13318102771055339347e-04, -+-1.08925808149881126548e-04, -+-1.04476797470485840437e-04, -+-9.99736846699831026861e-05, -+-9.54191113304803323683e-05, -+-9.08157451338251561638e-05, -+-8.61662783033089883962e-05, -+-8.14734260333982814777e-05, -+-7.67399249081906023075e-05, -+-7.19685313096766739269e-05, -+-6.71620198166663929249e-05, -+-6.23231815953190427171e-05, -+-5.74548227822070198159e-05, -+-5.25597628608498169912e-05, -+-4.76408330326411294346e-05, -+-4.27008745831808004092e-05, -+-3.77427372447754268139e-05, -+-3.27692775562946159791e-05, -+-2.77833572210794834225e-05, -+-2.27878414640919380344e-05, -+-1.77855973889981053694e-05, -+-1.27794923363028358154e-05, -+-7.77239224340285758588e-06, -+-2.76716000750597664943e-06, -+ 2.23334614765047225155e-06, -+ 7.22627430035223622482e-06, -+ 1.22087804538059595082e-05, -+ 1.71780301524608407758e-05, -+ 2.21312000908374962855e-05, -+ 2.70654797139531880809e-05, -+ 3.19780728084379127691e-05, -+ 3.68661990834432147361e-05, -+ 4.17270957404514982554e-05, -+ 4.65580190311022323554e-05, -+ 5.13562458021581016814e-05, -+ 5.61190750267443480906e-05, -+ 6.08438293210010258259e-05, -+ 6.55278564453003783789e-05, -+ 7.01685307891888973997e-05, -+ 7.47632548392249471477e-05, -+ 7.93094606288941272312e-05, -+ 8.38046111697948801871e-05, -+ 8.82462018632895745093e-05, -+ 9.26317618918994384889e-05, -+ 9.69588555895161487196e-05, -+ 1.01225083789883730243e-04, -+ 1.05428085152447302661e-04, -+ 1.09565537464902931428e-04, -+ 1.13635158921721518338e-04, -+ 1.17634709377956067329e-04, -+ 1.21561991577586462265e-04, -+ 1.25414852355879225454e-04, -+ 1.29191183814908515468e-04, -+ 1.32888924471751327088e-04, -+ 1.36506060378661892669e-04, -+ 1.40040626214685270945e-04, -+ 1.43490706347988396978e-04, -+ 1.46854435868515841024e-04, -+ 1.50130001590280805039e-04, -+ 1.53315643022813413417e-04, -+ 1.56409653311238074644e-04, -+ 1.59410380144482617453e-04, -+ 1.62316226631138655961e-04, -+ 1.65125652142516246785e-04, -+ 1.67837173122445686060e-04, -+ 1.70449363863413175593e-04, -+ 1.72960857248622345769e-04, -+ 1.75370345459602272869e-04, -+ 1.77676580649003228304e-04, -+ 1.79878375578234217958e-04, -+ 1.81974604219625616178e-04, -+ 1.83964202322818494873e-04, -+ 1.85846167945095638082e-04, -+ 1.87619561945405119441e-04, -+ 1.89283508441830545512e-04, -+ 1.90837195232300557094e-04, -+ 1.92279874178338393460e-04, -+ 1.93610861551680866121e-04, -+ 1.94829538343613950903e-04, -+ 1.95935350536894948301e-04, -+ 1.96927809340166344414e-04, -+ 1.97806491384736336846e-04, -+ 1.98571038883713909618e-04, -+ 1.99221159753417060602e-04, -+ 1.99756627697045236825e-04, -+ 2.00177282250609553729e-04, -+ 2.00483028791162594395e-04, -+ 2.00673838507340500988e-04, -+ 2.00749748332303471193e-04, -+ 2.00710860839155866373e-04, -+ 2.00557344098951099076e-04, -+ 2.00289431501410645185e-04, -+ 1.99907421538506638011e-04, -+ 1.99411677551082736374e-04, -+ 1.98802627438700833676e-04, -+ 1.98080763332926219986e-04, -+ 1.97246641234288935590e-04, -+ 1.96300880613169869337e-04, -+ 1.95244163974890567017e-04, -+ 1.94077236389296096204e-04, -+ 1.92800904985150346445e-04, -+ 1.91416038409673633282e-04, -+ 1.89923566253578820747e-04, -+ 1.88324478441976569726e-04, -+ 1.86619824591544307586e-04, -+ 1.84810713334366470651e-04, -+ 1.82898311608877559096e-04, -+ 1.80883843918355590027e-04, -+ 1.78768591557429662019e-04, -+ 1.76553891807085754475e-04, -+ 1.74241137098672801628e-04, -+ 1.71831774147425040116e-04, -+ 1.69327303056034789413e-04, -+ 1.66729276388829827970e-04, -+ 1.64039298217118011776e-04, -+ 1.61259023136285878450e-04, -+ 1.58390155255254730902e-04, -+ 1.55434447158867309821e-04, -+ 1.52393698843932419136e-04, -+ 1.49269756629439789971e-04, -+ 1.46064512041690788922e-04, -+ 1.42779900675020699667e-04, -+ 1.39417901028690864249e-04, -+ 1.35980533320795114868e-04, -+ 1.32469858279776427946e-04, -+ 1.28887975914319409792e-04, -+ 1.25237024262341641208e-04, -+ 1.21519178119826532425e-04, -+ 1.17736647750260424580e-04, -+ 1.13891677575382762027e-04, -+ 1.09986544848155620062e-04, -+ 1.06023558308557749072e-04, -+ 1.02005056823126766924e-04, -+ 9.79334080089949563690e-05, -+ 9.38110068432369283674e-05, -+ 8.96402742583390368340e-05, -+ 8.54236557246172082802e-05, -+ 8.11636198204074375134e-05, -+ 7.68626567908638934834e-05, -+ 7.25232770962033334184e-05, -+ 6.81480099502408253210e-05, -+ 6.37394018500648417607e-05, -+ 5.93000150977037791236e-05, -+ 5.48324263146410183461e-05, -+ 5.03392249500377099197e-05, -+ 4.58230117835234620669e-05, -+ 4.12863974234202202882e-05, -+ 3.67320008012637997784e-05, -+ 3.21624476634885960824e-05, -+ 2.75803690611435845046e-05, -+ 2.29883998385047982199e-05, -+ 1.83891771214516705382e-05, -+ 1.37853388064824855514e-05, -+ 9.17952205116795011679e-06, -+ 4.57436176706797238011e-06, -+-2.75108842579818438910e-08, -+-4.62346999106136241029e-06, -+-9.21089638641225220430e-06, -+-1.37871791373255400920e-05, -+-1.83497170273250301319e-05, -+-2.28959200315399970119e-05, -+-2.74232107835103849100e-05, -+-3.19290260328724777978e-05, -+-3.64108180931019818124e-05, -+-4.08660562784996536732e-05, -+-4.52922283295994015603e-05, -+-4.96868418262625327142e-05, -+-5.40474255875064181487e-05, -+-5.83715310574944550438e-05, -+-6.26567336767544860471e-05, -+-6.69006342379224212954e-05, -+-7.11008602252454944507e-05, -+-7.52550671370984356097e-05, -+-7.93609397907785223342e-05, -+-8.34161936088556751033e-05, -+-8.74185758863736857033e-05, -+-9.13658670381457783342e-05, -+-9.52558818255899069152e-05, -+-9.90864705622930764172e-05, -+-1.02855520297645628824e-04, -+-1.06560955978024466816e-04, -+-1.10200741584761408303e-04, -+-1.13772881248329986426e-04, -+-1.17275420338133038616e-04, -+-1.20706446527301793710e-04, -+-1.24064090831927222123e-04, -+-1.27346528624161774851e-04, -+-1.30551980618646957209e-04, -+-1.33678713831734421146e-04, -+-1.36725042512981202628e-04, -+-1.39689329048471762296e-04, -+-1.42569984835333479116e-04, -+-1.45365471127236698399e-04, -+-1.48074299850179806918e-04, -+-1.50695034388278933371e-04, -+-1.53226290339108047649e-04, -+-1.55666736238194213047e-04, -+-1.58015094252302533938e-04, -+-1.60270140841145748061e-04, -+-1.62430707387187727537e-04, -+-1.64495680793215953231e-04, -+-1.66464004047380415832e-04, -+-1.68334676755447923760e-04, -+-1.70106755639931378401e-04, -+-1.71779355005955645377e-04, -+-1.73351647173555225515e-04, -+-1.74822862876237544423e-04, -+-1.76192291625613234839e-04, -+-1.77459282041936094012e-04, -+-1.78623242150403258857e-04, -+-1.79683639643093680336e-04, -+-1.80640002106423656165e-04, -+-1.81491917214075620078e-04, -+-1.82239032885274609931e-04, -+-1.82881057408414176473e-04, -+-1.83417759529990343371e-04, -+-1.83848968508822530749e-04, -+-1.84174574135603265346e-04, -+-1.84394526717789769034e-04, -+-1.84508837029895376297e-04, -+-1.84517576229257786137e-04, -+-1.84420875737372863242e-04, -+-1.84218927086907938075e-04, -+-1.83911981734526851434e-04, -+-1.83500350839676173650e-04, -+-1.82984405009505745514e-04, -+-1.82364574010110863959e-04, -+-1.81641346444305146679e-04, -+-1.80815269396154251801e-04, -+-1.79886948042512636280e-04, -+-1.78857045231831964091e-04, -+-1.77726281030521376285e-04, -+-1.76495432237164907125e-04, -+-1.75165331864910952826e-04, -+-1.73736868592374774480e-04, -+-1.72210986183407241141e-04, -+-1.70588682876102914121e-04, -+-1.68871010741435372948e-04, -+-1.67059075011932430324e-04, -+-1.65154033380787864348e-04, -+-1.63157095271909268353e-04, -+-1.61069521081280296517e-04, -+-1.58892621390163224591e-04, -+-1.56627756150609387950e-04, -+-1.54276333843780973348e-04, -+-1.51839810611594959108e-04, -+-1.49319689362255997572e-04, -+-1.46717518850139323847e-04, -+-1.44034892730693565204e-04, -+-1.41273448590855218087e-04, -+-1.38434866955593221692e-04, -+-1.35520870271185604229e-04, -+-1.32533221865797814620e-04, -+-1.29473724888089073738e-04, -+-1.26344221224348324251e-04, -+-1.23146590394907499066e-04, -+-1.19882748430450496667e-04, -+-1.16554646728892494570e-04, -+-1.13164270893511021972e-04, -+-1.09713639553016026698e-04, -+-1.06204803164258788938e-04, -+-1.02639842798286093709e-04, -+-9.90208689104574309690e-05, -+-9.53500200953488063907e-05, -+-9.16294618271747146219e-05, -+-8.78613851864693950078e-05, -+-8.40480055737724741525e-05, -+-8.01915614110729224086e-05, -+-7.62943128317693849017e-05, -+-7.23585403599120898779e-05, -+-6.83865435794958062077e-05, -+-6.43806397945781601344e-05, -+-6.03431626810021750013e-05, -+-5.62764609305052045107e-05, -+-5.21828968880001095782e-05, -+-4.80648451828273766406e-05, -+-4.39246913547101223052e-05, -+-3.97648304753519063080e-05, -+-3.55876657662771198705e-05, -+-3.13956072138546100360e-05, -+-2.71910701822341436737e-05, -+-2.29764740250598643260e-05, -+-1.87542406966089186175e-05, -+-1.45267933633486321363e-05, -+-1.02965550165577958658e-05, -+-6.06594708686369126855e-06, -+-1.83738806147565725218e-06, -+ 2.38670789508730654728e-06, -+ 6.60393231605029799332e-06, -+ 1.08118838022856526365e-05, -+ 1.50081693864890804819e-05, -+ 1.91904058907051211296e-05, -+ 2.33562212764937420536e-05, -+ 2.75032559869653701879e-05, -+ 3.16291642799266015692e-05, -+ 3.57316155513857358346e-05, -+ 3.98082956486727347189e-05, -+ 4.38569081724363369137e-05, -+ 4.78751757667874686011e-05, -+ 5.18608413968659121744e-05, -+ 5.58116696131162758521e-05, -+ 5.97254478015662288413e-05, -+ 6.35999874194105038012e-05, -+ 6.74331252152119678313e-05, -+ 7.12227244330430300963e-05, -+ 7.49666759998972407220e-05, -+ 7.86628996957159043685e-05, -+ 8.23093453053795327638e-05, -+ 8.59039937520326019873e-05, -+ 8.94448582111133600001e-05, -+ 9.29299852044797151680e-05, -+ 9.63574556740282402905e-05, -+ 9.97253860342133961791e-05, -+ 1.03031929202938195831e-04, -+ 1.06275275610134644190e-04, -+ 1.09453654183648506066e-04, -+ 1.12565333311777745389e-04, -+ 1.15608621781949924361e-04, -+ 1.18581869695136337068e-04, -+ 1.21483469355360853659e-04, -+ 1.24311856133939833708e-04, -+ 1.27065509307947152248e-04, -+ 1.29742952872464735155e-04, -+ 1.32342756326188934566e-04, -+ 1.34863535429971070998e-04, -+ 1.37303952937931089294e-04, -+ 1.39662719300668973499e-04, -+ 1.41938593340331764125e-04, -+ 1.44130382897093850406e-04, -+ 1.46236945446754414840e-04, -+ 1.48257188689131702477e-04, -+ 1.50190071106954631209e-04, -+ 1.52034602494970392606e-04, -+ 1.53789844459004473734e-04, -+ 1.55454910884727745025e-04, -+ 1.57028968375900465160e-04, -+ 1.58511236661886526942e-04, -+ 1.59900988974221943979e-04, -+ 1.61197552392132844234e-04, -+ 1.62400308156727989691e-04, -+ 1.63508691953843704383e-04, -+ 1.64522194165353128834e-04, -+ 1.65440360088857943638e-04, -+ 1.66262790125675229700e-04, -+ 1.66989139937054223255e-04, -+ 1.67619120568575667371e-04, -+ 1.68152498542703266729e-04, -+ 1.68589095919475644722e-04, -+ 1.68928790325348127024e-04, -+ 1.69171514950206333802e-04, -+ 1.69317258512600938907e-04, -+ 1.69366065193253035638e-04, -+ 1.69318034536926169398e-04, -+ 1.69173321322751827635e-04, -+ 1.68932135403124315375e-04, -+ 1.68594741511303550284e-04, -+ 1.68161459037872361389e-04, -+ 1.67632661776220571190e-04, -+ 1.67008777637239416583e-04, -+ 1.66290288333431385444e-04, -+ 1.65477729032657161099e-04, -+ 1.64571687981757684184e-04, -+ 1.63572806100295385775e-04, -+ 1.62481776544717680536e-04, -+ 1.61299344243187993495e-04, -+ 1.60026305401423106544e-04, -+ 1.58663506979840374144e-04, -+ 1.57211846142359855600e-04, -+ 1.55672269677209203047e-04, -+ 1.54045773390101885464e-04, -+ 1.52333401470171580496e-04, -+ 1.50536245829059009979e-04, -+ 1.48655445413586417922e-04, -+ 1.46692185492392439651e-04, -+ 1.44647696917026745639e-04, -+ 1.42523255357962074646e-04, -+ 1.40320180515933701443e-04, -+ 1.38039835309150310440e-04, -+ 1.35683625036847225554e-04, -+ 1.33252996519696450227e-04, -+ 1.30749437217595669385e-04, -+ 1.28174474325369749201e-04, -+ 1.25529673846935238340e-04, -+ 1.22816639648479919303e-04, -+ 1.20037012491233243219e-04, -+ 1.17192469044403129027e-04, -+ 1.14284720878873418933e-04, -+ 1.11315513442261188005e-04, -+ 1.08286625015946468605e-04, -+ 1.05199865654693577497e-04, -+ 1.02057076109495512093e-04, -+ 9.88601267342783304043e-05, -+ 9.56109163771139760083e-05, -+ 9.23113712565947120868e-05, -+ 8.89634438240340108539e-05, -+ 8.55691116121616991534e-05, -+ 8.21303760709912982884e-05, -+ 7.86492613915423208508e-05, -+ 7.51278133181146123365e-05, -+ 7.15680979497604612561e-05, -+ 6.79722005317787153359e-05, -+ 6.43422242377698607113e-05, -+ 6.06802889430856936094e-05, -+ 5.69885299903377532185e-05, -+ 5.32690969476886882583e-05, -+ 4.95241523606481209006e-05, -+ 4.57558704980855863662e-05, -+ 4.19664360932403064002e-05, -+ 3.81580430803206248217e-05, -+ 3.43328933276007924294e-05, -+ 3.04931953676192458200e-05, -+ 2.66411631252087834044e-05, -+ 2.27790146442161646153e-05, -+ 1.89089708134602095535e-05, -+ 1.50332540927946444229e-05, -+ 1.11540872399499682495e-05, -+ 7.27369203889113503421e-06, -+ 3.39428803041684083773e-06, -+-4.81908754276311450070e-07, -+-4.35268705634372629675e-06, -+-8.21584164763919663841e-06, -+-1.20691745839433958802e-05, -+-1.59104964523640528653e-05, -+-1.97376276122016780436e-05, -+-2.35483994285795049709e-05, -+-2.73406554981410021381e-05, -+-3.11122528661240456025e-05, -+-3.48610632341272955897e-05, -+-3.85849741578888450833e-05, -+-4.22818902344056668941e-05, -+-4.59497342777289552842e-05, -+-4.95864484827761740015e-05, -+-5.31899955765110986849e-05, -+-5.67583599558492673393e-05, -+-6.02895488116546415976e-05, -+-6.37815932381954160072e-05, -+-6.72325493274930760176e-05, -+-7.06404992478322041284e-05, -+-7.40035523060039669620e-05, -+-7.73198459925695190907e-05, -+-8.05875470096189763401e-05, -+-8.38048522804609266092e-05, -+-8.69699899406400548209e-05, -+-9.00812203098600702616e-05, -+-9.31368368441220313616e-05, -+-9.61351670676795016460e-05, -+-9.90745734842556015267e-05, -+-1.01953454467028386448e-04, -+-1.04770245126946709891e-04, -+-1.07523418158803123158e-04, -+-1.10211484664747875421e-04, -+-1.12832994954700652560e-04, -+-1.15386539323270961746e-04, -+-1.17870748802769852344e-04, -+-1.20284295891912211356e-04, -+-1.22625895259826191760e-04, -+-1.24894304424997594233e-04, -+-1.27088324408796619729e-04, -+-1.29206800363245279464e-04, -+-1.31248622172700554062e-04, -+-1.33212725029144128013e-04, -+-1.35098089980784487676e-04, -+-1.36903744453693149413e-04, -+-1.38628762746211502523e-04, -+-1.40272266495882424152e-04, -+-1.41833425118677113443e-04, -+-1.43311456220300168993e-04, -+-1.44705625979375639015e-04, -+-1.46015249502334635862e-04, -+-1.47239691149835216733e-04, -+-1.48378364834568840904e-04, -+-1.49430734290319368980e-04, -+-1.50396313312156941142e-04, -+-1.51274665967682871333e-04, -+-1.52065406779206268055e-04, -+-1.52768200876835928996e-04, -+-1.53382764122401261215e-04, -+-1.53908863204188484618e-04, -+-1.54346315702462519998e-04, -+-1.54694990125800718034e-04, -+-1.54954805918226855375e-04, -+-1.55125733437199472397e-04, -+-1.55207793902502094903e-04, -+-1.55201059316101394776e-04, -+-1.55105652353058453673e-04, -+-1.54921746223595071862e-04, -+-1.54649564506431944988e-04, -+-1.54289380953534071422e-04, -+-1.53841519266410082720e-04, -+-1.53306352844135500117e-04, -+-1.52684304503277075687e-04, -+-1.51975846169923051046e-04, -+-1.51181498544025521777e-04, -+-1.50301830736287767064e-04, -+-1.49337459877842251886e-04, -+-1.48289050702975444508e-04, -+-1.47157315105178143448e-04, -+-1.45943011666808031192e-04, -+-1.44646945162670226758e-04, -+-1.43269966037836245969e-04, -+-1.41812969860030777154e-04, -+-1.40276896746939125880e-04, -+-1.38662730768791489120e-04, -+-1.36971499326602120161e-04, -+-1.35204272506452450198e-04, -+-1.33362162410215011723e-04, -+-1.31446322463141056745e-04, -+-1.29457946698729233501e-04, -+-1.27398269021328599442e-04, -+-1.25268562446894228622e-04, -+-1.23070138322430765393e-04, -+-1.20804345524507650679e-04, -+-1.18472569637393813956e-04, -+-1.16076232111318126267e-04, -+-1.13616789401283968986e-04, -+-1.11095732087066782702e-04, -+-1.08514583974842290402e-04, -+-1.05874901181016539101e-04, -+-1.03178271198800118515e-04, -+-1.00426311948084758256e-04, -+-9.76206708091875252457e-05, -+-9.47630236410444991074e-05, -+-9.18550737843973141112e-05, -+-8.88985510506610496001e-05, -+-8.58952106969416680562e-05, -+-8.28468323879038561972e-05, -+-7.97552191450655496591e-05, -+-7.66221962841397250411e-05, -+-7.34496103410512394703e-05, -+-7.02393279872563352237e-05, -+-6.69932349350013444994e-05, -+-6.37132348331598941495e-05, -+-6.04012481542852742197e-05, -+-5.70592110735821189476e-05, -+-5.36890743402856300114e-05, -+-5.02928021423770289528e-05, -+-4.68723709650220007926e-05, -+-4.34297684435565900540e-05, -+-3.99669922116305890969e-05, -+-3.64860487451815660126e-05, -+-3.29889522029066755543e-05, -+-2.94777232639011821304e-05, -+-2.59543879631318446101e-05, -+-2.24209765254152845900e-05, -+-1.88795221985704670439e-05, -+-1.53320600864227232015e-05, -+-1.17806259822765688943e-05, -+-8.22725520364250435790e-06, -+-4.67398142876525914271e-06, -+-1.12283553561652046528e-06, -+ 2.42415555586849744280e-06, -+ 5.96497003777039182297e-06, -+ 9.49759236367494958416e-06, -+ 1.30200143930290886731e-05, -+ 1.65302365297154976124e-05, -+ 2.00262688542018995176e-05, -+ 2.35061322486258601641e-05, -+ 2.69678595141725338990e-05, -+ 3.04094964801652475677e-05, -+ 3.38291031041225136330e-05, -+ 3.72247545623280811614e-05, -+ 4.05945423301795488562e-05, -+ 4.39365752517605946421e-05, -+ 4.72489805980300616090e-05, -+ 5.05299051130391751476e-05, -+ 5.37775160475925401854e-05, -+ 5.69900021797799109010e-05, -+ 6.01655748218186950589e-05, -+ 6.33024688126045798455e-05, -+ 6.63989434955355209119e-05, -+ 6.94532836809095877094e-05, -+ 7.24638005925247566689e-05, -+ 7.54288327978053365708e-05, -+ 7.83467471210983574734e-05, -+ 8.12159395395303644084e-05, -+ 8.40348360609798490086e-05, -+ 8.68018935836787020261e-05, -+ 8.95156007369763171777e-05, -+ 9.21744787028109000904e-05, -+ 9.47770820174428766953e-05, -+ 9.73219993530192951838e-05, -+ 9.98078542785484291089e-05, -+ 1.02233305999877626346e-04, -+ 1.04597050078279252879e-04, -+ 1.06897819127260571481e-04, -+ 1.09134383487232477302e-04, -+ 1.11305551877675454743e-04, -+ 1.13410172026465080842e-04, -+ 1.15447131276023696555e-04, -+ 1.17415357165986388734e-04, -+ 1.19313817992076323833e-04, -+ 1.21141523340904152650e-04, -+ 1.22897524600417128735e-04, -+ 1.24580915445738179192e-04, -+ 1.26190832300148298968e-04, -+ 1.27726454771003749460e-04, -+ 1.29187006060312931576e-04, -+ 1.30571753349855405749e-04, -+ 1.31880008160592337128e-04, -+ 1.33111126686225034448e-04, -+ 1.34264510100741093525e-04, -+ 1.35339604839805301758e-04, -+ 1.36335902855876962966e-04, -+ 1.37252941846921911991e-04, -+ 1.38090305458667854995e-04, -+ 1.38847623460269244903e-04, -+ 1.39524571893355508502e-04, -+ 1.40120873194398874121e-04, -+ 1.40636296290376592178e-04, -+ 1.41070656667688923902e-04, -+ 1.41423816414358241448e-04, -+ 1.41695684235501812628e-04, -+ 1.41886215442108465281e-04, -+ 1.41995411913169058797e-04, -+ 1.42023322031210527672e-04, -+ 1.41970040591311803596e-04, -+ 1.41835708683687403576e-04, -+ 1.41620513549942957229e-04, -+ 1.41324688413120390503e-04, -+ 1.40948512281664279549e-04, -+ 1.40492309727460512516e-04, -+ 1.39956450638105661232e-04, -+ 1.39341349943586742142e-04, -+ 1.38647467317560966387e-04, -+ 1.37875306853443076616e-04, -+ 1.37025416715516460461e-04, -+ 1.36098388765306077238e-04, -+ 1.35094858163456845238e-04, -+ 1.34015502947381628333e-04, -+ 1.32861043584951986655e-04, -+ 1.31632242504520034906e-04, -+ 1.30329903601576123319e-04, -+ 1.28954871722338328469e-04, -+ 1.27508032124644551074e-04, -+ 1.25990309916430414392e-04, -+ 1.24402669472184333093e-04, -+ 1.22746113827731657530e-04, -+ 1.21021684053717931608e-04, -+ 1.19230458608205958028e-04, -+ 1.17373552668725822899e-04, -+ 1.15452117444264388342e-04, -+ 1.13467339467561269067e-04, -+ 1.11420439868162524316e-04, -+ 1.09312673626677319912e-04, -+ 1.07145328810660439892e-04, -+ 1.04919725792656324940e-04, -+ 1.02637216450778944853e-04, -+ 1.00299183352382616555e-04, -+ 9.79070389212828459625e-05, -+ 9.54622245890343021661e-05, -+ 9.29662099307709859563e-05, -+ 9.04204917861251337118e-05, -+ 8.78265933657491361646e-05, -+ 8.51860633439697795440e-05, -+ 8.25004749381152567740e-05, -+ 7.97714249750583101993e-05, -+ 7.70005329455285302594e-05, -+ 7.41894400467507647698e-05, -+ 7.13398082139749418204e-05, -+ 6.84533191414649809991e-05, -+ 6.55316732935233309948e-05, -+ 6.25765889061299349127e-05, -+ 5.95898009797798930746e-05, -+ 5.65730602641084840982e-05, -+ 5.35281322348962640303e-05, -+ 5.04567960640498228923e-05, -+ 4.73608435831570034977e-05, -+ 4.42420782412198123029e-05, -+ 4.11023140571756856096e-05, -+ 3.79433745677702796120e-05, -+ 3.47670917715006306549e-05, -+ 3.15753050690913554294e-05, -+ 2.83698602012252819608e-05, -+ 2.51526081840889388815e-05, -+ 2.19254042433976171740e-05, -+ 1.86901067473987712679e-05, -+ 1.54485761396172072233e-05, -+ 1.22026738718400676369e-05, -+ 8.95426133799693216720e-06, -+ 5.70519880953679468414e-06, -+ 2.45734437291689684403e-06, -+-7.87447130237725029692e-07, -+-4.02732515958524032887e-06, -+-7.26044452868275316679e-06, -+-1.04849664530539972413e-05, -+-1.36990595931614081774e-05, -+-1.69009010916851591059e-05, -+-2.00886776045228981175e-05, -+-2.32605863249292218813e-05, -+-2.64148360002174825494e-05, -+-2.95496479404527710906e-05, -+-3.26632570185692985083e-05, -+-3.57539126613519710695e-05, -+-3.88198798307268989525e-05, -+-4.18594399948131874701e-05, -+-4.48708920881937505377e-05, -+-4.78525534608703297839e-05, -+-5.08027608153759224091e-05, -+-5.37198711315230623370e-05, -+-5.66022625782771395811e-05, -+-5.94483354122496957970e-05, -+-6.22565128623159649065e-05, -+-6.50252419998696961625e-05, -+-6.77529945942363268996e-05, -+-7.04382679527763058127e-05, -+-7.30795857452109842494e-05, -+-7.56754988117607863083e-05, -+-7.82245859545587472750e-05, -+-8.07254547120429588646e-05, -+-8.31767421157772956445e-05, -+-8.55771154294189502010e-05, -+-8.79252728693081722763e-05, -+-9.02199443063830727177e-05, -+-9.24598919490082272500e-05, -+-9.46439110063570436353e-05, -+-9.67708303319964480843e-05, -+-9.88395130473318793462e-05, -+-1.00848857144579225412e-04, -+-1.02797796068976429913e-04, -+-1.04685299279854606281e-04, -+-1.06510372790377650341e-04, -+-1.08272059685596318680e-04, -+-1.09969440618577611341e-04, -+-1.11601634284353844629e-04, -+-1.13167797871448837341e-04, -+-1.14667127490753893888e-04, -+-1.16098858581540945157e-04, -+-1.17462266294409572748e-04, -+-1.18756665850985608014e-04, -+-1.19981412880174577386e-04, -+-1.21135903730876983027e-04, -+-1.22219575760907419324e-04, -+-1.23231907602096356184e-04, -+-1.24172419401388892416e-04, -+-1.25040673037858960726e-04, -+-1.25836272315542666532e-04, -+-1.26558863132016492748e-04, -+-1.27208133622654898272e-04, -+-1.27783814280521123164e-04, -+-1.28285678051853307665e-04, -+-1.28713540407127574909e-04, -+-1.29067259387689078475e-04, -+-1.29346735627960067851e-04, -+-1.29551912353247712954e-04, -+-1.29682775353174970954e-04, -+-1.29739352930806405104e-04, -+-1.29721715827507011074e-04, -+-1.29629977123626777182e-04, -+-1.29464292115094922872e-04, -+-1.29224858166029714888e-04, -+-1.28911914537480141833e-04, -+-1.28525742192432532911e-04, -+-1.28066663577224341096e-04, -+-1.27535042379524224485e-04, -+-1.26931283263051979506e-04, -+-1.26255831579210470172e-04, -+-1.25509173055851516688e-04, -+-1.24691833463355639632e-04, -+-1.23804378258269496800e-04, -+-1.22847412204727150179e-04, -+-1.21821578973907172273e-04, -+-1.20727560721779606824e-04, -+-1.19566077645420637825e-04, -+-1.18337887518172143108e-04, -+-1.17043785203959168793e-04, -+-1.15684602151032309364e-04, -+-1.14261205865508758540e-04, -+-1.12774499364983135674e-04, -+-1.11225420612612888125e-04, -+-1.09614941931962398339e-04, -+-1.07944069403014051949e-04, -+-1.06213842239701207601e-04, -+-1.04425332149347485926e-04, -+-1.02579642674402744655e-04, -+-1.00677908516879591628e-04, -+-9.87212948458993696643e-05, -+-9.67109965887680804323e-05, -+-9.46482377060114694195e-05, -+-9.25342704508053923206e-05, -+-9.03703746132478017740e-05, -+-8.81578567499270010759e-05, -+-8.58980493992450127834e-05, -+-8.35923102829684219880e-05, -+-8.12420214944795825900e-05, -+-7.88485886742140853296e-05, -+-7.64134401727725140778e-05, -+-7.39380262022039087908e-05, -+-7.14238179759623244237e-05, -+-6.88723068380450985934e-05, -+-6.62850033818259808810e-05, -+-6.36634365591029851607e-05, -+-6.10091527798890391780e-05, -+-5.83237150034378014633e-05, -+-5.56087018211295729380e-05, -+-5.28657065316302825957e-05, -+-5.00963362089557252181e-05, -+-4.73022107639477868909e-05, -+-4.44849619997154997839e-05, -+-4.16462326615831018211e-05, -+-3.87876754821360727392e-05, -+-3.59109522218197118487e-05, -+-3.30177327057781363410e-05, -+-3.01096938573906879706e-05, -+-2.71885187291101264469e-05, -+-2.42558955311136346803e-05, -+-2.13135166584285751863e-05, -+-1.83630777169545625609e-05, -+-1.54062765490442216251e-05, -+-1.24448122591593738538e-05, -+-9.48038424016769929749e-06, -+-6.51469120083589183379e-06, -+-3.54943019507466532529e-06, -+-5.86295653488527638405e-07, -+ 2.37302158221821148760e-06, -+ 5.32683522143069861928e-06, -+ 8.27346448286191381023e-06, -+ 1.12112350482972268184e-05, -+ 1.41384800113054187414e-05, -+ 1.70535408203802065375e-05, -+ 1.99547682159801403000e-05, -+ 2.28405231609389523773e-05, -+ 2.57091777637233010942e-05, -+ 2.85591161940189065772e-05, -+ 3.13887355901324983888e-05, -+ 3.41964469577007317870e-05, -+ 3.69806760592044563105e-05, -+ 3.97398642937916670619e-05, -+ 4.24724695669193537460e-05, -+ 4.51769671493239000906e-05, -+ 4.78518505248824157702e-05, -+ 5.04956322267979359933e-05, -+ 5.31068446617757945380e-05, -+ 5.56840409216389250861e-05, -+ 5.82257955819805972353e-05, -+ 6.07307054873712566403e-05, -+ 6.31973905227825399032e-05, -+ 6.56244943706810369847e-05, -+ 6.80106852534736013504e-05, -+ 7.03546566608603151554e-05, -+ 7.26551280617074665301e-05, -+ 7.49108456000490471188e-05, -+ 7.71205827748727728481e-05, -+ 7.92831411032435707121e-05, -+ 8.13973507665162628304e-05, -+ 8.34620712392105025155e-05, -+ 8.54761919002437216665e-05, -+ 8.74386326261934136023e-05, -+ 8.93483443662723540333e-05, -+ 9.12043096987145523709e-05, -+ 9.30055433682796324664e-05, -+ 9.47510928045935062712e-05, -+ 9.64400386210567564342e-05, -+ 9.80714950940618610149e-05, -+ 9.96446106222721028753e-05, -+ 1.01158568165728382656e-04, -+ 1.02612585664560169562e-04, -+ 1.04005916437090132763e-04, -+ 1.05337849557132784027e-04, -+ 1.06607710210300974068e-04, -+ 1.07814860029146553436e-04, -+ 1.08958697406971076818e-04, -+ 1.10038657790159221262e-04, -+ 1.11054213948895991334e-04, -+ 1.12004876226144938888e-04, -+ 1.12890192764771252285e-04, -+ 1.13709749712725811358e-04, -+ 1.14463171406168479332e-04, -+ 1.15150120530503418228e-04, -+ 1.15770298259229445850e-04, -+ 1.16323444370574466855e-04, -+ 1.16809337341866760875e-04, -+ 1.17227794421640891544e-04, -+ 1.17578671679441387104e-04, -+ 1.17861864033347977262e-04, -+ 1.18077305255228525620e-04, -+ 1.18224967953752292129e-04, -+ 1.18304863535199995448e-04, -+ 1.18317042142129913288e-04, -+ 1.18261592569961779611e-04, -+ 1.18138642161559509242e-04, -+ 1.17948356679904758004e-04, -+ 1.17690940158963789036e-04, -+ 1.17366634732863803995e-04, -+ 1.16975720443508680781e-04, -+ 1.16518515026772340008e-04, -+ 1.15995373677425865329e-04, -+ 1.15406688792958039944e-04, -+ 1.14752889696471350382e-04, -+ 1.14034442338837080757e-04, -+ 1.13251848980312161972e-04, -+ 1.12405647851827392831e-04, -+ 1.11496412796171015655e-04, -+ 1.10524752889300383963e-04, -+ 1.09491312042027578609e-04, -+ 1.08396768582333136470e-04, -+ 1.07241834818576963558e-04, -+ 1.06027256583881440439e-04, -+ 1.04753812761974128402e-04, -+ 1.03422314794789343279e-04, -+ 1.02033606172135439690e-04, -+ 1.00588561903744460506e-04, -+ 9.90880879740364323887e-05, -+ 9.75331207799133901139e-05, -+ 9.59246265519796495209e-05, -+ 9.42636007594733522788e-05, -+ 9.25510674993434647893e-05, -+ 9.07880788697715116788e-05, -+ 8.89757143285934223474e-05, -+ 8.71150800369563193095e-05, -+ 8.52073081886286283915e-05, -+ 8.32535563253643403313e-05, -+ 8.12550066387327429764e-05, -+ 7.92128652588326546708e-05, -+ 7.71283615303221291911e-05, -+ 7.50027472761658441352e-05, -+ 7.28372960496142743273e-05, -+ 7.06333023747593316630e-05, -+ 6.83920809761930819422e-05, -+ 6.61149659981945323883e-05, -+ 6.38033102139136647918e-05, -+ 6.14584842250172271472e-05, -+ 5.90818756522692805321e-05, -+ 5.66748883175234417645e-05, -+ 5.42389414176053005876e-05, -+ 5.17754686905652722838e-05, -+ 4.92859175748246270223e-05, -+ 4.67717483616246192265e-05, -+ 4.42344333413538523341e-05, -+ 4.16754559442534589821e-05, -+ 3.90963098759170062319e-05, -+ 3.64984982481686095644e-05, -+ 3.38835327057898264913e-05, -+ 3.12529325496060770987e-05, -+ 2.86082238564397440281e-05, -+ 2.59509385964386121227e-05, -+ 2.32826137482886975970e-05, -+ 2.06047904128203539622e-05, -+ 1.79190129255183850797e-05, -+ 1.52268279684512867372e-05, -+ 1.25297836820848089342e-05, -+ 9.82942877762201860177e-06, -+ 7.12731165015420239825e-06, -+ 4.42497949335259697511e-06, -+ 1.72397741607120027234e-06, -+-9.74152438591300545820e-07, -+-3.66787177127622279055e-06, -+-6.35564700089772787053e-06, -+-9.03595013522811150888e-06, -+-1.17072596370426850940e-05, -+-1.43680612853348429033e-05, -+-1.70168490311088741731e-05, -+-1.96521258473063757481e-05, -+-2.22724045722929874815e-05, -+-2.48762087465587318491e-05, -+-2.74620734420669071810e-05, -+-3.00285460838262985587e-05, -+-3.25741872632199556503e-05, -+-3.50975715426378017596e-05, -+-3.75972882509638620259e-05, -+-4.00719422694826037015e-05, -+-4.25201548077314798470e-05, -+-4.49405641689601653135e-05, -+-4.73318265046533437649e-05, -+-4.96926165577844057412e-05, -+-5.20216283943892467806e-05, -+-5.43175761229789356922e-05, -+-5.65791946015099025133e-05, -+-5.88052401314395777510e-05, -+-6.09944911385232351646e-05, -+-6.31457488399748983641e-05, -+-6.52578378976302012505e-05, -+-6.73296070567570273304e-05, -+-6.93599297701697614779e-05, -+-7.13477048073084426077e-05, -+-7.32918568479592438987e-05, -+-7.51913370602950043584e-05, -+-7.70451236629288198831e-05, -+-7.88522224706823078241e-05, -+-8.06116674237784532151e-05, -+-8.23225211001796784195e-05, -+-8.39838752108034195757e-05, -+-8.55948510773545134279e-05, -+-8.71546000925265052688e-05, -+-8.86623041623341395616e-05, -+-9.01171761303480768493e-05, -+-9.15184601836167176863e-05, -+-9.28654322400672107207e-05, -+-9.41574003171887131567e-05, -+-9.53937048818311668537e-05, -+-9.65737191809003779359e-05, -+-9.76968495528504664652e-05, -+-9.87625357197741252134e-05, -+-9.97702510599723062104e-05, -+-1.00719502860870411881e-04, -+-1.01609832552167786510e-04, -+-1.02440815919101530407e-04, -+-1.03212063295764626164e-04, -+-1.03923219738351186561e-04, -+-1.04573965178293452004e-04, -+-1.05164014555214358751e-04, -+-1.05693117929663829482e-04, -+-1.06161060575574886056e-04, -+-1.06567663052451822372e-04, -+-1.06912781257252219227e-04, -+-1.07196306455972030416e-04, -+-1.07418165294943403058e-04, -+-1.07578319791868081681e-04, -+-1.07676767306620711079e-04, -+-1.07713540491867520218e-04, -+-1.07688707223558459772e-04, -+-1.07602370511359431062e-04, -+-1.07454668389108225495e-04, -+-1.07245773785382550523e-04, -+-1.06975894374283873184e-04, -+-1.06645272406552399651e-04, -+-1.06254184521135326192e-04, -+-1.05802941537346746376e-04, -+-1.05291888227765690245e-04, -+-1.04721403072029775822e-04, -+-1.04091897991691806000e-04, -+-1.03403818066321226388e-04, -+-1.02657641231036926891e-04, -+-1.01853877955673766901e-04, -+-1.00993070905791316192e-04, -+-1.00075794585747357554e-04, -+-9.91026549640561086902e-05, -+-9.80742890812979042133e-05, -+-9.69913646407931124161e-05, -+-9.58545795823286168359e-05, -+-9.46646616391909589408e-05, -+-9.34223678787874924024e-05, -+-9.21284842271553308570e-05, -+-9.07838249776128224534e-05, -+-8.93892322839143330148e-05, -+-8.79455756381782092872e-05, -+-8.64537513339248380991e-05, -+-8.49146819145573397919e-05, -+-8.33293156075965769404e-05, -+-8.16986257450709826454e-05, -+-8.00236101703410545325e-05, -+-7.83052906317712431187e-05, -+-7.65447121635933332108e-05, -+-7.47429424543394473968e-05, -+-7.29010712032219468804e-05, -+-7.10202094648487806125e-05, -+-6.91014889826641889262e-05, -+-6.71460615115136803116e-05, -+-6.51550981297363063834e-05, -+-6.31297885411947681941e-05, -+-6.10713403676550390092e-05, -+-5.89809784319366008933e-05, -+-5.68599440322564117804e-05, -+-5.47094942081945308492e-05, -+-5.25309009987145816302e-05, -+-5.03254506926742041614e-05, -+-4.80944430722666716100e-05, -+-4.58391906498364391982e-05, -+-4.35610178985148694948e-05, -+-4.12612604771267081670e-05, -+-3.89412644498179452723e-05, -+-3.66023855008608539076e-05, -+-3.42459881450970870078e-05, -+-3.18734449344449372976e-05, -+-2.94861356610133087193e-05, -+-2.70854465571730438690e-05, -+-2.46727694931252419688e-05, -+-2.22495011724306296223e-05, -+-1.98170423258837072170e-05, -+-1.73767969043094321503e-05, -+-1.49301712706606661907e-05, -+-1.24785733919144050828e-05, -+-1.00234120312237155384e-05, -+-7.56609594078786384176e-06, -+-5.10803305590721484829e-06, -+-2.65062969064796876903e-06, -+-1.95289735662093879841e-07, -+ 2.25658614149781538763e-06, -+ 4.70360129302714707189e-06, -+ 7.14436388406460956736e-06, -+ 9.57748768197934699769e-06, -+ 1.20015928413035928855e-05, -+ 1.44153066838678001481e-05, -+ 1.68172644736985684973e-05, -+ 1.92061101862432256275e-05, -+ 2.15804972714890652230e-05, -+ 2.39390894105489946330e-05, -+ 2.62805612652901807722e-05, -+ 2.86035992205861757688e-05, -+ 3.09069021187789754650e-05, -+ 3.31891819859409621185e-05, -+ 3.54491647495335673412e-05, -+ 3.76855909470640991661e-05, -+ 3.98972164253476286417e-05, -+ 4.20828130299881090571e-05, -+ 4.42411692846974037292e-05, -+ 4.63710910600786401664e-05, -+ 4.84714022315057565344e-05, -+ 5.05409453257393869504e-05, -+ 5.25785821559190830470e-05, -+ 5.45831944446160030582e-05, -+ 5.65536844345369244078e-05, -+ 5.84889754866179482624e-05, -+ 6.03880126651817544857e-05, -+ 6.22497633097759614507e-05, -+ 6.40732175934516200036e-05, -+ 6.58573890671531589130e-05, -+ 6.76013151899331594073e-05, -+ 6.93040578447094631495e-05, -+ 7.09647038392890094557e-05, -+ 7.25823653923957063478e-05, -+ 7.41561806044386303671e-05, -+ 7.56853139127996218504e-05, -+ 7.71689565313425266486e-05, -+ 7.86063268739927838722e-05, -+ 7.99966709621114031078e-05, -+ 8.13392628154750729503e-05, -+ 8.26334048266602784602e-05, -+ 8.38784281186408519097e-05, -+ 8.50736928854174478216e-05, -+ 8.62185887155113381969e-05, -+ 8.73125348981630282396e-05, -+ 8.83549807120687932067e-05, -+ 8.93454056965571380595e-05, -+ 9.02833199050315720431e-05, -+ 9.11682641405671851135e-05, -+ 9.19998101735852404819e-05, -+ 9.27775609414710033911e-05, -+ 9.35011507300643465376e-05, -+ 9.41702453369411529019e-05, -+ 9.47845422164207620109e-05, -+ 9.53437706062401266714e-05, -+ 9.58476916358535753569e-05, -+ 9.62960984163175226676e-05, -+ 9.66888161117409645909e-05, -+ 9.70257019922829883106e-05, -+ 9.73066454687029886274e-05, -+ 9.75315681084497403076e-05, -+ 9.77004236333403651774e-05, -+ 9.78131978988259413559e-05, -+ 9.78699088548996316969e-05, -+ 9.78706064886931931908e-05, -+ 9.78153727488194655671e-05, -+ 9.77043214515344428731e-05, -+ 9.75375981687954049385e-05, -+ 9.73153800983090819503e-05, -+ 9.70378759156690566361e-05, -+ 9.67053256086932366224e-05, -+ 9.63180002940841964183e-05, -+ 9.58762020165379531865e-05, -+ 9.53802635304530459226e-05, -+ 9.48305480643773406665e-05, -+ 9.42274490683603826915e-05, -+ 9.35713899443812172551e-05, -+ 9.28628237600275093996e-05, -+ 9.21022329456168908045e-05, -+ 9.12901289749561102105e-05, -+ 9.04270520299548278501e-05, -+ 8.95135706492842500494e-05, -+ 8.85502813613394572714e-05, -+ 8.75378083017155033231e-05, -+ 8.64768028154355933648e-05, -+ 8.53679430442136669664e-05, -+ 8.42119334989644183860e-05, -+ 8.30095046178623384566e-05, -+ 8.17614123102081163550e-05, -+ 8.04684374863896741690e-05, -+ 7.91313855742244295563e-05, -+ 7.77510860219827716839e-05, -+ 7.63283917883946329882e-05, -+ 7.48641788199511630389e-05, -+ 7.33593455158201108654e-05, -+ 7.18148121806984416748e-05, -+ 7.02315204659344010599e-05, -+ 6.86104327992547092423e-05, -+ 6.69525318034425696596e-05, -+ 6.52588197043136263292e-05, -+ 6.35303177283451494866e-05, -+ 6.17680654903193261922e-05, -+ 5.99731203713451578997e-05, -+ 5.81465568876299857470e-05, -+ 5.62894660503753302872e-05, -+ 5.44029547171763266846e-05, -+ 5.24881449353098910931e-05, -+ 5.05461732772982176055e-05, -+ 4.85781901691450268576e-05, -+ 4.65853592116120024023e-05, -+ 4.45688564950032751967e-05, -+ 4.25298699077687427554e-05, -+ 4.04695984393985014349e-05, -+ 3.83892514779906950887e-05, -+ 3.62900481029001826128e-05, -+ 3.41732163729119983926e-05, -+ 3.20399926102781816627e-05, -+ 2.98916206811338720545e-05, -+ 2.77293512726352792174e-05, -+ 2.55544411672685861127e-05, -+ 2.33681525147488944956e-05, -+ 2.11717521018997930282e-05, -+ 1.89665106210108342917e-05, -+ 1.67537019369919437987e-05, -+ 1.45346023538229485151e-05, -+ 1.23104898806885715561e-05, -+ 1.00826434982246897416e-05, -+ 7.85234242529587054475e-06, -+ 5.62086538672328424332e-06, -+ 3.38948988238076994443e-06, -+ 1.15949145807567223944e-06, -+-1.06785702137072707871e-06, -+-3.29128609643022805093e-06, -+-5.50953043415126442282e-06, -+-7.72132954601048490098e-06, -+-9.92542850192639466761e-06, -+-1.21205786400318798465e-05, -+-1.43055382718054505098e-05, -+-1.64790733821644087950e-05, -+-1.86399583241264707630e-05, -+-2.07869765076501085866e-05, -+-2.29189210822677048591e-05, -+-2.50345956131302830444e-05, -+-2.71328147500858357817e-05, -+-2.92124048894140672726e-05, -+-3.12722048278788822620e-05, -+-3.33110664086613662642e-05, -+-3.53278551589146714283e-05, -+-3.73214509185134290983e-05, -+-3.92907484596808479252e-05, -+-4.12346580971520483842e-05, -+-4.31521062885095992652e-05, -+-4.50420362244331414815e-05, -+-4.69034084084459727392e-05, -+-4.87352012259119438489e-05, -+-5.05364115019466182167e-05, -+-5.23060550479419978189e-05, -+-5.40431671964060976313e-05, -+-5.57468033238534737064e-05, -+-5.74160393614016982132e-05, -+-5.90499722928839986262e-05, -+-6.06477206401485110371e-05, -+-6.22084249353098108415e-05, -+-6.37312481796986922324e-05, -+-6.52153762892660273948e-05, -+-6.66600185262068023343e-05, -+-6.80644079165767824100e-05, -+-6.94278016536845402323e-05, -+-7.07494814870478466295e-05, -+-7.20287540967148501693e-05, -+-7.32649514527553767347e-05, -+-7.44574311597405420022e-05, -+-7.56055767860350496235e-05, -+-7.67087981777354925789e-05, -+-7.77665317570998471846e-05, -+-7.87782408053171710489e-05, -+-7.97434157294830232507e-05, -+-8.06615743136474125027e-05, -+-8.15322619538178135472e-05, -+-8.23550518768057822480e-05, -+-8.31295453428154712148e-05, -+-8.38553718316820378541e-05, -+-8.45321892126865308053e-05, -+-8.51596838978487685485e-05, -+-8.57375709786715794677e-05, -+-8.62655943462551288645e-05, -+-8.67435267947428979536e-05, -+-8.71711701080811815620e-05, -+-8.75483551300409708427e-05, -+-8.78749418175082112241e-05, -+-8.81508192770273922871e-05, -+-8.83759057846058285928e-05, -+-8.85501487887902459777e-05, -+-8.86735248970403253620e-05, -+-8.87460398454319876341e-05, -+-8.87677284517321478442e-05, -+-8.87386545518955844984e-05, -+-8.86589109200488812183e-05, -+-8.85286191720270214433e-05, -+-8.83479296525471903935e-05, -+-8.81170213061050432417e-05, -+-8.78361015316937552991e-05, -+-8.75054060214538136477e-05, -+-8.71251985833677709175e-05, -+-8.66957709481281274576e-05, -+-8.62174425603089747113e-05, -+-8.56905603539940554595e-05, -+-8.51154985129900034952e-05, -+-8.44926582158212472655e-05, -+-8.38224673656400427703e-05, -+-8.31053803052506274724e-05, -+-8.23418775174244912257e-05, -+-8.15324653107033707304e-05, -+-8.06776754908900028181e-05, -+-7.97780650184373106007e-05, -+-7.88342156519530526523e-05, -+-7.78467335780445683635e-05, -+-7.68162490277368720107e-05, -+-7.57434158797055202611e-05, -+-7.46289112505573565791e-05, -+-7.34734350724463647960e-05, -+-7.22777096582538457334e-05, -+-7.10424792545960120905e-05, -+-6.97685095829731762810e-05, -+-6.84565873693016984378e-05, -+-6.71075198621341007877e-05, -+-6.57221343398554209113e-05, -+-6.43012776071557890780e-05, -+-6.28458154810835923102e-05, -+-6.13566322669881414808e-05, -+-5.98346302246723383829e-05, -+-5.82807290250536745514e-05, -+-5.66958651977116231350e-05, -+-5.50809915695821473340e-05, -+-5.34370766951852471703e-05, -+-5.17651042787056485015e-05, -+-5.00660725882709159050e-05, -+-4.83409938627764752253e-05, -+-4.65908937116066385552e-05, -+-4.48168105076074261466e-05, -+-4.30197947736637000340e-05, -+-4.12009085632678118496e-05, -+-3.93612248353795128467e-05, -+-3.75018268240328908462e-05, -+-3.56238074029696449125e-05, -+-3.37282684457607440684e-05, -+-3.18163201816986404395e-05, -+-2.98890805479001212680e-05, -+-2.79476745379709999822e-05, -+-2.59932335476144176260e-05, -+-2.40268947175631300377e-05, -+-2.20498002742151532848e-05, -+-2.00630968683545589837e-05, -+-1.80679349123383810435e-05, -+-1.60654679161321810180e-05, -+-1.40568518225757011658e-05, -+-1.20432443422608051199e-05, -+-1.00258042884029404491e-05, -+-8.00569091208727099719e-06, -+-5.98406323826935972361e-06, -+-3.96207940290984570201e-06, -+-1.94089599162064887166e-06, -+ 7.83326198005747898907e-08, -+ 2.09445492257301924948e-06, -+ 4.10632292949940006763e-06, -+ 6.11279282652582891513e-06, -+ 8.11272562092629197044e-06, -+ 1.01049877857409114437e-05, -+ 1.20884519001330790116e-05, -+ 1.40619972852336154977e-05, -+ 1.60245106352098204275e-05, -+ 1.79748866431337342073e-05, -+ 1.99120286213276946629e-05, -+ 2.18348491158356895975e-05, -+ 2.37422705146771266798e-05, -+ 2.56332256495490372664e-05, -+ 2.75066583906145059298e-05, -+ 2.93615242341154332678e-05, -+ 3.11967908823933051383e-05, -+ 3.30114388160605143471e-05, -+ 3.48044618580061525877e-05, -+ 3.65748677288642252687e-05, -+ 3.83216785937263849210e-05, -+ 4.00439315997342949434e-05, -+ 4.17406794042833988461e-05, -+ 4.34109906935455636926e-05, -+ 4.50539506910283595867e-05, -+ 4.66686616558951677231e-05, -+ 4.82542433707754188257e-05, -+ 4.98098336188025105076e-05, -+ 5.13345886496223527710e-05, -+ 5.28276836341212981227e-05, -+ 5.42883131076322484254e-05, -+ 5.57156914013806444015e-05, -+ 5.71090530619421132309e-05, -+ 5.84676532584898041777e-05, -+ 5.97907681776162523235e-05, -+ 6.10776954055230943694e-05, -+ 6.23277542973780997616e-05, -+ 6.35402863336491786732e-05, -+ 6.47146554632286333470e-05, -+ 6.58502484331734486145e-05, -+ 6.69464751048926757886e-05, -+ 6.80027687566194964435e-05, -+ 6.90185863720170044832e-05, -+ 6.99934089147837939756e-05, -+ 7.09267415890902172158e-05, -+ 7.18181140857647161381e-05, -+ 7.26670808140748066949e-05, -+ 7.34732211190075503587e-05, -+ 7.42361394839436268501e-05, -+ 7.49554657186243128170e-05, -+ 7.56308551323502581193e-05, -+ 7.62619886923002242643e-05, -+ 7.68485731669290054405e-05, -+ 7.73903412543740319013e-05, -+ 7.78870516958209856877e-05, -+ 7.83384893737935715909e-05, -+ 7.87444653953147782324e-05, -+ 7.91048171599420551657e-05, -+ 7.94194084126392720741e-05, -+ 7.96881292814878859675e-05, -+ 7.99108963002358391528e-05, -+ 8.00876524156968731425e-05, -+ 8.02183669800153831232e-05, -+ 8.03030357278285665534e-05, -+ 8.03416807383593541874e-05, -+ 8.03343503824849146247e-05, -+ 8.02811192548356472283e-05, -+ 8.01820880909844978159e-05, -+ 8.00373836697980867074e-05, -+ 7.98471587010282266798e-05, -+ 7.96115916982296047740e-05, -+ 7.93308868371003252356e-05, -+ 7.90052737993477842459e-05, -+ 7.86350076021916034787e-05, -+ 7.82203684136235352425e-05, -+ 7.77616613535522615110e-05, -+ 7.72592162809664708160e-05, -+ 7.67133875672632579209e-05, -+ 7.61245538558890809302e-05, -+ 7.54931178084552014299e-05, -+ 7.48195058374859282803e-05, -+ 7.41041678259918263445e-05, -+ 7.33475768340236086891e-05, -+ 7.25502287924132663235e-05, -+ 7.17126421838883761507e-05, -+ 7.08353577117746115253e-05, -+ 6.99189379564657824580e-05, -+ 6.89639670199154882456e-05, -+ 6.79710501583437364317e-05, -+ 6.69408134033987737470e-05, -+ 6.58739031720058094803e-05, -+ 6.47709858651478100500e-05, -+ 6.36327474558071720916e-05, -+ 6.24598930663620521917e-05, -+ 6.12531465356429315541e-05, -+ 6.00132499759513726788e-05, -+ 5.87409633202952744489e-05, -+ 5.74370638601181475024e-05, -+ 5.61023457738005077431e-05, -+ 5.47376196462178894200e-05, -+ 5.33437119796454611961e-05, -+ 5.19214646963013157221e-05, -+ 5.04717346328268796885e-05, -+ 4.89953930270064014403e-05, -+ 4.74933249970308410371e-05, -+ 4.59664290136169696407e-05, -+ 4.44156163652937726011e-05, -+ 4.28418106171734954413e-05, -+ 4.12459470635278838894e-05, -+ 3.96289721744912600845e-05, -+ 3.79918430372181689441e-05, -+ 3.63355267918223325723e-05, -+ 3.46610000624296407993e-05, -+ 3.29692483836776077948e-05, -+ 3.12612656229971128227e-05, -+ 2.95380533990134290555e-05, -+ 2.78006204964105713487e-05, -+ 2.60499822775738051233e-05, -+ 2.42871600914147949164e-05, -+ 2.25131806796356132906e-05, -+ 2.07290755808621738894e-05, -+ 1.89358805329046950760e-05, -+ 1.71346348735776756247e-05, -+ 1.53263809403626031776e-05, -+ 1.35121634692837809516e-05, -+ 1.16930289933384643446e-05, -+ 9.87002524082706459254e-06, -+ 8.04420053392769432833e-06, -+ 6.21660318786371497718e-06, -+ 4.38828091098144307670e-06, -+ 2.56028020614524101076e-06, -+ 7.33645773704159215729e-07, -+-1.09058008356538882663e-06, -+-2.91135805322907028961e-06, -+-4.72765240333595687151e-06, -+-6.53843156959771685090e-06, -+-8.34266873927393720254e-06, -+-1.01393424314343474083e-05, -+-1.19274370732709349764e-05, -+-1.37059435721405858846e-05, -+-1.54738598829871196378e-05, -+-1.72301915709141233841e-05, -+-1.89739523684456172069e-05, -+-2.07041647273114594839e-05, -+-2.24198603643615891102e-05, -+-2.41200808013344202745e-05, -+-2.58038778981763044563e-05, -+-2.74703143796157200874e-05, -+-2.91184643547017321143e-05, -+-3.07474138290197399233e-05, -+-3.23562612093023567895e-05, -+-3.39441178001584614038e-05, -+-3.55101082926439871944e-05, -+-3.70533712444301888567e-05, -+-3.85730595512544287501e-05, -+-4.00683409094500665032e-05, -+-4.15383982693033816007e-05, -+-4.29824302789406134098e-05, -+-4.43996517185575042359e-05, -+-4.57892939247349858053e-05, -+-4.71506052046175686584e-05, -+-4.84828512397324982693e-05, -+-4.97853154792346060619e-05, -+-5.10572995223683090350e-05, -+-5.22981234899434565362e-05, -+-5.35071263846277400461e-05, -+-5.46836664398836234187e-05, -+-5.58271214573224499331e-05, -+-5.69368891323614851295e-05, -+-5.80123873679696164230e-05, -+-5.90530545763586015842e-05, -+-6.00583499684634902521e-05, -+-6.10277538310640554767e-05, -+-6.19607677914099007560e-05, -+-6.28569150692159534649e-05, -+-6.37157407158944321529e-05, -+-6.45368118409359687801e-05, -+-6.53197178252850279385e-05, -+-6.60640705216541051321e-05, -+-6.67695044416362863812e-05, -+-6.74356769295752540719e-05, -+-6.80622683230799142623e-05, -+-6.86489821001279852154e-05, -+-6.91955450126904592642e-05, -+-6.97017072068230802637e-05, -+-7.01672423291767658176e-05, -+-7.05919476198861947256e-05, -+-7.09756439918057140982e-05, -+-7.13181760960681986961e-05, -+-7.16194123739501793333e-05, -+-7.18792450950348377767e-05, -+-7.20975903816736135316e-05, -+-7.22743882197516537879e-05, -+-7.24096024557741556067e-05, -+-7.25032207802958942548e-05, -+-7.25552546977243766621e-05, -+-7.25657394825357868065e-05, -+-7.25347341219498558274e-05, -+-7.24623212451169996162e-05, -+-7.23486070388806753713e-05, -+-7.21937211501822589683e-05, -+-7.19978165751875085875e-05, -+-7.17610695352167158104e-05, -+-7.14836793395702676862e-05, -+-7.11658682353526731877e-05, -+-7.08078812443949090743e-05, -+-7.04099859873934258306e-05, -+-6.99724724953850081566e-05, -+-6.94956530086853716552e-05, -+-6.89798617634244460098e-05, -+-6.84254547658288183589e-05, -+-6.78328095543798148277e-05, -+-6.72023249500277669805e-05, -+-6.65344207946062419579e-05, -+-6.58295376776219041525e-05, -+-6.50881366515859591205e-05, -+-6.43106989360903185575e-05, -+-6.34977256107851671055e-05, -+-6.26497372974739176162e-05, -+-6.17672738315155477485e-05, -+-6.08508939227416309091e-05, -+-5.99011748060970076221e-05, -+-5.89187118822223946605e-05, -+-5.79041183481987132707e-05, -+-5.68580248186811984187e-05, -+-5.57810789376551931251e-05, -+-5.46739449810503702100e-05, -+-5.35373034504554770174e-05, -+-5.23718506581807131213e-05, -+-5.11782983039181917171e-05, -+-4.99573730432570882465e-05, -+-4.87098160483125057073e-05, -+-4.74363825607329001348e-05, -+-4.61378414373535389293e-05, -+-4.48149746887680454615e-05, -+-4.34685770110934173059e-05, -+-4.20994553112074291123e-05, -+-4.07084282257405295205e-05, -+-3.92963256341110296946e-05, -+-3.78639881658720183844e-05, -+-3.64122667027106395048e-05, -+-3.49420218753273198247e-05, -+-3.34541235555410240970e-05, -+-3.19494503438986083817e-05, -+-3.04288890530928917170e-05, -+-2.88933341874874255505e-05, -+-2.73436874190750308462e-05, -+-2.57808570601205806739e-05, -+-2.42057575328682884756e-05, -+-2.26193088365677101494e-05, -+-2.10224360121490399698e-05, -+-1.94160686048590696543e-05, -+-1.78011401251455341182e-05, -+-1.61785875081583371295e-05, -+-1.45493505721038791060e-05, -+-1.29143714758213699049e-05, -+-1.12745941758700444585e-05, -+-9.63096388344320252515e-06, -+-7.98442652142029617504e-06, -+-6.33592818186786765829e-06, -+-4.68641458429933138496e-06, -+-3.03683053500296397801e-06, -+-1.38811938774586377356e-06, -+ 2.58777493839178202322e-07, -+ 1.90292127187864929960e-06, -+ 3.54337616759140759028e-06, -+ 5.17920999202801067562e-06, -+ 6.80949467391633912354e-06, -+ 8.43330678431570807498e-06, -+ 1.00497280577839181130e-05, -+ 1.16578459097642718917e-05, -+ 1.32567539499020862689e-05, -+ 1.48455524910031115056e-05, -+ 1.64233490533491062295e-05, -+ 1.79892588640891236808e-05, -+ 1.95424053514245014756e-05, -+ 2.10819206333345681716e-05, -+ 2.26069460005168742459e-05, -+ 2.41166323933478058403e-05, -+ 2.56101408725446344061e-05, -+ 2.70866430832949805965e-05, -+ 2.85453217125733007859e-05, -+ 2.99853709394462142215e-05, -+ 3.14059968780488809876e-05, -+ 3.28064180130436779592e-05, -+ 3.41858656273021432946e-05, -+ 3.55435842215810670545e-05, -+ 3.68788319259649065773e-05, -+ 3.81908809028492260114e-05, -+ 3.94790177412656769699e-05, -+ 4.07425438422898093392e-05, -+ 4.19807757953880351259e-05, -+ 4.31930457454549954818e-05, -+ 4.43787017503647075972e-05, -+ 4.55371081288425238044e-05, -+ 4.66676457984745168698e-05, -+ 4.77697126036755268658e-05, -+ 4.88427236334443488387e-05, -+ 4.98861115287400902485e-05, -+ 5.08993267793200968442e-05, -+ 5.18818380098863440766e-05, -+ 5.28331322553930322872e-05, -+ 5.37527152253746494555e-05, -+ 5.46401115571613411491e-05, -+ 5.54948650578534959663e-05, -+ 5.63165389349345359561e-05, -+ 5.71047160154089449252e-05, -+ 5.78589989533570669814e-05, -+ 5.85790104258065492428e-05, -+ 5.92643933168274041653e-05, -+ 5.99148108897627355894e-05, -+ 6.05299469475165509511e-05, -+ 6.11095059808236870788e-05, -+ 6.16532133044444885040e-05, -+ 6.21608151812043867963e-05, -+ 6.26320789338565816822e-05, -+ 6.30667930446937390586e-05, -+ 6.34647672428986905826e-05, -+ 6.38258325795768347542e-05, -+ 6.41498414904665125455e-05, -+ 6.44366678463023396118e-05, -+ 6.46862069908247323737e-05, -+ 6.48983757664325786518e-05, -+ 6.50731125274843654437e-05, -+ 6.52103771412599882238e-05, -+ 6.53101509766035163464e-05, -+ 6.53724368802683817540e-05, -+ 6.53972591410049980528e-05, -+ 6.53846634414262362599e-05, -+ 6.53347167976985163280e-05, -+ 6.52475074871135241571e-05, -+ 6.51231449636010796761e-05, -+ 6.49617597612497395644e-05, -+ 6.47635033859116657304e-05, -+ 6.45285481949697814485e-05, -+ 6.42570872653582068207e-05, -+ 6.39493342499302042841e-05, -+ 6.36055232222692201391e-05, -+ 6.32259085100558739911e-05, -+ 6.28107645171077595475e-05, -+ 6.23603855342008971162e-05, -+ 6.18750855388094879363e-05, -+ 6.13551979838913776489e-05, -+ 6.08010755758598702586e-05, -+ 6.02130900418846006969e-05, -+ 5.95916318866736676439e-05, -+ 5.89371101388912814706e-05, -+ 5.82499520873748857785e-05, -+ 5.75306030073172492193e-05, -+ 5.67795258765894393974e-05, -+ 5.59972010823701890950e-05, -+ 5.51841261183018495025e-05, -+ 5.43408152723015371618e-05, -+ 5.34677993052802834643e-05, -+ 5.25656251209348160261e-05, -+ 5.16348554268246720794e-05, -+ 5.06760683869446402865e-05, -+ 4.96898572660009552938e-05, -+ 4.86768300656121986501e-05, -+ 4.76376091526542401900e-05, -+ 4.65728308799746458426e-05, -+ 4.54831451997094723732e-05, -+ 4.43692152694205702067e-05, -+ 4.32317170513272638010e-05, -+ 4.20713389048248215750e-05, -+ 4.08887811725691820543e-05, -+ 3.96847557603624830438e-05, -+ 3.84599857110910642592e-05, -+ 3.72152047729705208619e-05, -+ 3.59511569623536525052e-05, -+ 3.46685961213579385467e-05, -+ 3.33682854705920874040e-05, -+ 3.20509971572010551400e-05, -+ 3.07175117985585750834e-05, -+ 2.93686180218123159854e-05, -+ 2.80051119996170835922e-05, -+ 2.66277969822622470077e-05, -+ 2.52374828265144898710e-05, -+ 2.38349855214322459531e-05, -+ 2.24211267114313739257e-05, -+ 2.09967332168798777813e-05, -+ 1.95626365525002586521e-05, -+ 1.81196724438590493929e-05, -+ 1.66686803422232323734e-05, -+ 1.52105029380648706125e-05, -+ 1.37459856734939339152e-05, -+ 1.22759762539012447631e-05, -+ 1.08013241590919135580e-05, -+ 9.32288015419072379738e-06, -+ 7.84149580059962841079e-06, -+ 6.35802296728773956217e-06, -+ 4.87331334269314813773e-06, -+ 3.38821794751525819401e-06, -+ 1.90358664867536025810e-06, -+ 4.20267674722007678397e-07, -+-1.06089286704349063181e-06, -+-2.53905147144755971960e-06, -+-4.01336771405853671665e-06, -+-5.48300472726051319248e-06, -+-6.94712967353908428204e-06, -+-8.40491421565995491089e-06, -+-9.85553498354600196257e-06, -+-1.12981740375379932287e-05, -+-1.27320193278005813889e-05, -+-1.41562651496129757108e-05, -+-1.55701125942935366840e-05, -+-1.69727699954863943171e-05, -+-1.83634533706132413357e-05, -+-1.97413868571768872317e-05, -+-2.11058031437259111299e-05, -+-2.24559438952188090413e-05, -+-2.37910601725753876787e-05, -+-2.51104128461361075818e-05, -+-2.64132730028669993332e-05, -+-2.76989223470385161768e-05, -+-2.89666535941785825052e-05, -+-3.02157708580817170672e-05, -+-3.14455900306639634365e-05, -+-3.26554391544575276863e-05, -+-3.38446587875432448227e-05, -+-3.50126023607246299988e-05, -+-3.61586365267507298072e-05, -+-3.72821415014014433467e-05, -+-3.83825113962520523994e-05, -+-3.94591545429407643156e-05, -+-4.05114938087662831479e-05, -+-4.15389669034495396562e-05, -+-4.25410266768976613630e-05, -+-4.35171414078138610380e-05, -+-4.44667950830035220650e-05, -+-4.53894876672311637202e-05, -+-4.62847353634881464551e-05, -+-4.71520708635396170122e-05, -+-4.79910435886203451676e-05, -+-4.88012199201597561809e-05, -+-4.95821834204167205301e-05, -+-5.03335350429265633945e-05, -+-5.10548933326265304408e-05, -+-5.17458946156012646414e-05, -+-5.24061931783268363742e-05, -+-5.30354614363393909939e-05, -+-5.36333900922485962647e-05, -+-5.41996882830139510762e-05, -+-5.47340837164388594079e-05, -+-5.52363227967925824054e-05, -+-5.57061707395272917836e-05, -+-5.61434116750343203787e-05, -+-5.65478487413978341881e-05, -+-5.69193041661166998697e-05, -+-5.72576193367504884379e-05, -+-5.75626548604881785863e-05, -+-5.78342906126072504132e-05, -+-5.80724257738199440486e-05, -+-5.82769788565022921634e-05, -+-5.84478877198096668589e-05, -+-5.85851095736871960683e-05, -+-5.86886209717912786239e-05, -+-5.87584177933450407718e-05, -+-5.87945152139549069526e-05, -+-5.87969476654236840492e-05, -+-5.87657687846015756232e-05, -+-5.87010513513210692091e-05, -+-5.86028872154704082165e-05, -+-5.84713872132640056231e-05, -+-5.83066810727762474998e-05, -+-5.81089173088098371331e-05, -+-5.78782631071765932274e-05, -+-5.76149041984740298956e-05, -+-5.73190447214473209757e-05, -+-5.69909070760322414208e-05, -+-5.66307317661793541358e-05, -+-5.62387772325672526141e-05, -+-5.58153196753171827195e-05, -+-5.53606528668218819548e-05, -+-5.48750879548260181830e-05, -+-5.43589532558681387997e-05, -+-5.38125940392313040217e-05, -+-5.32363723015430049873e-05, -+-5.26306665321520585781e-05, -+-5.19958714694554905247e-05, -+-5.13323978483126871185e-05, -+-5.06406721387124545189e-05, -+-4.99211362758563274877e-05, -+-4.91742473818266735545e-05, -+-4.84004774790149961978e-05, -+-4.76003131954764758258e-05, -+-4.67742554624208601633e-05, -+-4.59228192039893781543e-05, -+-4.50465330195347888644e-05, -+-4.41459388585886764659e-05, -+-4.32215916887159588432e-05, -+-4.22740591564579529368e-05, -+-4.13039212415705373426e-05, -+-4.03117699047655450996e-05, -+-3.92982087291690829157e-05, -+-3.82638525557110084044e-05, -+-3.72093271126660717248e-05, -+-3.61352686395672686765e-05, -+-3.50423235057168379857e-05, -+-3.39311478235224090556e-05, -+-3.28024070568877919004e-05, -+-3.16567756248915059525e-05, -+-3.04949365009877199171e-05, -+-2.93175808079664161425e-05, -+-2.81254074089120697057e-05, -+-2.69191224944017248270e-05, -+-2.56994391661852553642e-05, -+-2.44670770175918836234e-05, -+-2.32227617109122020126e-05, -+-2.19672245519847623529e-05, -+-2.07012020622797709220e-05, -+-1.94254355486677272565e-05, -+-1.81406706711849960521e-05, -+-1.68476570089850853130e-05, -+-1.55471476247899104671e-05, -+-1.42398986280482303988e-05, -+-1.29266687370718316063e-05, -+-1.16082188403988693324e-05, -+-1.02853115576371897586e-05, -+-8.95871080003975092416e-06, -+-7.62918133106494951846e-06, -+-6.29748832717637000583e-06, -+-4.96439693911456911849e-06, -+-3.63067185393867396159e-06, -+-2.29707685802459498842e-06, -+-9.64374401315848450426e-07, -+ 3.66674836944231519952e-07, -+ 1.69531238074935703441e-06, -+ 3.02078238789119312040e-06, -+ 4.34233207830084875904e-06, -+ 5.65921215992918806928e-06, -+ 6.97067725192901449440e-06, -+ 8.27598630488246552004e-06, -+ 9.57440301788133736832e-06, -+ 1.08651962521827093731e-05, -+ 1.21476404412087555200e-05, -+ 1.34210159967052598768e-05, -+ 1.46846097107889237831e-05, -+ 1.59377151536783862637e-05, -+ 1.71796330668853545218e-05, -+ 1.84096717516477081152e-05, -+ 1.96271474523901250152e-05, -+ 2.08313847350004374291e-05, -+ 2.20217168597138741371e-05, -+ 2.31974861483999769760e-05, -+ 2.43580443460485478093e-05, -+ 2.55027529762765186715e-05, -+ 2.66309836906033699266e-05, -+ 2.77421186114023531077e-05, -+ 2.88355506682450058473e-05, -+ 2.99106839275143976181e-05, -+ 3.09669339150908589178e-05, -+ 3.20037279319387916966e-05, -+ 3.30205053624261607144e-05, -+ 3.40167179752114232517e-05, -+ 3.49918302165381128787e-05, -+ 3.59453194957816331854e-05, -+ 3.68766764630972321086e-05, -+ 3.77854052790209193153e-05, -+ 3.86710238758958244651e-05, -+ 3.95330642109541764121e-05, -+ 4.03710725109682755916e-05, -+ 4.11846095083103026020e-05, -+ 4.19732506683146705116e-05, -+ 4.27365864078233130617e-05, -+ 4.34742223048040452049e-05, -+ 4.41857792989385563150e-05, -+ 4.48708938830692915926e-05, -+ 4.55292182854370863364e-05, -+ 4.61604206425851002231e-05, -+ 4.67641851628709925696e-05, -+ 4.73402122805066265026e-05, -+ 4.78882188000329483382e-05, -+ 4.84079380311931386409e-05, -+ 4.88991199141192096943e-05, -+ 4.93615311347864993397e-05, -+ 4.97949552306842973051e-05, -+ 5.01991926866579958816e-05, -+ 5.05740610208843503087e-05, -+ 5.09193948609473228035e-05, -+ 5.12350460099867614349e-05, -+ 5.15208835028994156444e-05, -+ 5.17767936525754493993e-05, -+ 5.20026800861617919140e-05, -+ 5.21984637713472843972e-05, -+ 5.23640830326715540628e-05, -+ 5.24994935578649676486e-05, -+ 5.26046683942319904669e-05, -+ 5.26795979350977647813e-05, -+ 5.27242898963412381865e-05, -+ 5.27387692830453080699e-05, -+ 5.27230783462991780706e-05, -+ 5.26772765301947225270e-05, -+ 5.26014404090633305310e-05, -+ 5.24956636150047901762e-05, -+ 5.23600567557668073533e-05, -+ 5.21947473230388830738e-05, -+ 5.19998795912271193358e-05, -+ 5.17756145067857189357e-05, -+ 5.15221295681833840827e-05, -+ 5.12396186965899134232e-05, -+ 5.09282920973702621955e-05, -+ 5.05883761124873977634e-05, -+ 5.02201130639010932745e-05, -+ 4.98237610880825857601e-05, -+ 4.93995939617437136368e-05, -+ 4.89479009189001211121e-05, -+ 4.84689864593871208814e-05, -+ 4.79631701489468674927e-05, -+ 4.74307864110306472431e-05, -+ 4.68721843104290958456e-05, -+ 4.62877273288830334104e-05, -+ 4.56777931328110654310e-05, -+ 4.50427733333015571236e-05, -+ 4.43830732385187975314e-05, -+ 4.36991115986785094998e-05, -+ 4.29913203437512904219e-05, -+ 4.22601443140560245420e-05, -+ 4.15060409839102542823e-05, -+ 4.07294801785067884332e-05, -+ 3.99309437841909614544e-05, -+ 3.91109254523149503578e-05, -+ 3.82699302968499331071e-05, -+ 3.74084745859401725113e-05, -+ 3.65270854275851831246e-05, -+ 3.56263004496409294844e-05, -+ 3.47066674743320204575e-05, -+ 3.37687441874715604177e-05, -+ 3.28130978025864834921e-05, -+ 3.18403047201496259048e-05, -+ 3.08509501821220885999e-05, -+ 2.98456279220141111716e-05, -+ 2.88249398106583463292e-05, -+ 2.77894954979411405727e-05, -+ 2.67399120506568739174e-05, -+ 2.56768135867345998077e-05, -+ 2.46008309060387078085e-05, -+ 2.35126011179608967452e-05, -+ 2.24127672660373206972e-05, -+ 2.13019779497730199318e-05, -+ 2.01808869439458528371e-05, -+ 1.90501528155745074983e-05, -+ 1.79104385387887921337e-05, -+ 1.67624111078244624493e-05, -+ 1.56067411483699600464e-05, -+ 1.44441025274743162915e-05, -+ 1.32751719622829946729e-05, -+ 1.21006286277736464400e-05, -+ 1.09211537637588811984e-05, -+ 9.73743028136644528262e-06, -+ 8.55014236922561691437e-06, -+ 7.35997509958635033394e-06, -+ 6.16761403459692181825e-06, -+ 4.97374483296533837542e-06, -+ 3.77905285722950647743e-06, -+ 2.58422278186008839003e-06, -+ 1.38993820241930683239e-06, -+ 1.96881245997903772338e-07, -+-9.94267816848598569217e-07, -+-2.18283095844447963890e-06, -+-3.36813277840069707876e-06, -+-4.54950088586700000424e-06, -+-5.72626627941386950107e-06, -+-6.89776372433048807836e-06, -+-8.06333212712694707145e-06, -+-9.22231490703067589279e-06, -+-1.03740603642693244191e-05, -+-1.15179220449344173161e-05, -+-1.26532591022196861730e-05, -+-1.37794366538495711072e-05, -+-1.48958261354584999990e-05, -+-1.60018056497799296184e-05, -+-1.70967603114136951952e-05, -+-1.81800825869820380861e-05, -+-1.92511726305242952264e-05, -+-2.03094386138927829864e-05, -+-2.13542970520092069756e-05, -+-2.23851731227873900821e-05, -+-2.34015009815511875976e-05, -+-2.44027240697762211102e-05, -+-2.53882954179860686225e-05, -+-2.63576779426533689202e-05, -+-2.73103447369098503218e-05, -+-2.82457793549575378290e-05, -+-2.91634760899918437553e-05, -+-3.00629402455041167019e-05, -+-3.09436883998153130820e-05, -+-3.18052486637019455554e-05, -+-3.26471609309779970515e-05, -+-3.34689771219005548241e-05, -+-3.42702614192727262341e-05, -+-3.50505904971203557973e-05, -+-3.58095537418260222574e-05, -+-3.65467534655933827146e-05, -+-3.72618051121717498101e-05, -+-3.79543374546707974228e-05, -+-3.86239927854306394216e-05, -+-3.92704270978131317837e-05, -+-3.98933102598363287456e-05, -+-4.04923261795653974715e-05, -+-4.10671729621785269976e-05, -+-4.16175630586323642046e-05, -+-4.21432234058559141441e-05, -+-4.26438955584067616068e-05, -+-4.31193358115292238756e-05, -+-4.35693153155569312869e-05, -+-4.39936201816156069303e-05, -+-4.43920515785651946397e-05, -+-4.47644258211561343495e-05, -+-4.51105744493632472049e-05, -+-4.54303442988531914885e-05, -+-4.57235975625737596506e-05, -+-4.59902118434391446694e-05, -+-4.62300801980975147932e-05, -+-4.64431111717703053654e-05, -+-4.66292288241590738816e-05, -+-4.67883727464197082162e-05, -+-4.69204980692097139592e-05, -+-4.70255754618213880035e-05, -+-4.71035911224101212042e-05, -+-4.71545467593474220552e-05, -+-4.71784595637180143891e-05, -+-4.71753621729942670049e-05, -+-4.71453026259235373810e-05, -+-4.70883443086696765927e-05, -+-4.70045658922535814004e-05, -+-4.68940612613444625227e-05, -+-4.67569394344568726790e-05, -+-4.65933244756150703129e-05, -+-4.64033553975471216042e-05, -+-4.61871860564808808737e-05, -+-4.59449850386188616159e-05, -+-4.56769355383655138421e-05, -+-4.53832352283949652812e-05, -+-4.50640961216473178623e-05, -+-4.47197444253447825278e-05, -+-4.43504203871267281252e-05, -+-4.39563781334040550529e-05, -+-4.35378855000395927045e-05, -+-4.30952238554646824297e-05, -+-4.26286879163457669119e-05, -+-4.21385855559199974771e-05, -+-4.16252376051221437895e-05, -+-4.10889776466288376587e-05, -+-4.05301518019508379771e-05, -+-3.99491185117068837215e-05, -+-3.93462483092169100062e-05, -+-3.87219235875561562329e-05, -+-3.80765383602142771309e-05, -+-3.74104980155082837679e-05, -+-3.67242190649002693526e-05, -+-3.60181288853753334362e-05, -+-3.52926654560366292231e-05, -+-3.45482770890794257056e-05, -+-3.37854221553090375610e-05, -+-3.30045688043594255523e-05, -+-3.22061946798075831645e-05, -+-3.13907866293216945321e-05, -+-3.05588404100427330412e-05, -+-2.97108603893675688823e-05, -+-2.88473592413132615716e-05, -+-2.79688576386454084658e-05, -+-2.70758839409515568225e-05, -+-2.61689738788582883049e-05, -+-2.52486702345479146949e-05, -+-2.43155225188067227653e-05, -+-2.33700866447662229544e-05, -+-2.24129245985293835562e-05, -+-2.14446041069073238181e-05, -+-2.04656983024178883341e-05, -+-1.94767853857754148804e-05, -+-1.84784482860567825561e-05, -+-1.74712743187444023349e-05, -+-1.64558548418461311194e-05, -+-1.54327849102923173909e-05, -+-1.44026629288111792759e-05, -+-1.33660903034842037365e-05, -+-1.23236710921832843933e-05, -+-1.12760116540923691986e-05, -+-1.02237202985157386555e-05, -+-9.16740693317562989567e-06, -+-8.10768271220163393815e-06, -+-7.04515968401436206049e-06, -+-5.98045043930514029506e-06, -+-4.91416775931360371891e-06, -+-3.84692426460422025455e-06, -+-2.77933206454218416435e-06, -+-1.71200240766848139346e-06, -+-6.45545333172962557628e-07, -+ 4.19430676336646794336e-07, -+ 1.48231904057302648397e-06, -+ 2.54251542561663930372e-06, -+ 3.59941808609308168670e-06, -+ 4.65242820524958869112e-06, -+ 5.70095023278988534811e-06, -+ 6.74439222023971488674e-06, -+ 7.78216615367016922942e-06, -+ 8.81368828359270617260e-06, -+ 9.83837945182666922020e-06, -+ 1.08556654151943217460e-05, -+ 1.18649771658138885200e-05, -+ 1.28657512478499302136e-05, -+ 1.38574300705307268156e-05, -+ 1.48394622172600090695e-05, -+ 1.58113027506664198453e-05, -+ 1.67724135133877546580e-05, -+ 1.77222634244721200859e-05, -+ 1.86603287711980042802e-05, -+ 1.95860934961685117974e-05, -+ 2.04990494795206747223e-05, -+ 2.13986968160965711628e-05, -+ 2.22845440874262652991e-05, -+ 2.31561086283755511721e-05, -+ 2.40129167883148332595e-05, -+ 2.48545041866689361690e-05, -+ 2.56804159627113593367e-05, -+ 2.64902070194693860814e-05, -+ 2.72834422616106000525e-05, -+ 2.80596968271851059942e-05, -+ 2.88185563131008925446e-05, -+ 2.95596169942142674564e-05, -+ 3.02824860359208226652e-05, -+ 3.09867817001359949951e-05, -+ 3.16721335445593264431e-05, -+ 3.23381826151192079948e-05, -+ 3.29845816314999765108e-05, -+ 3.36109951656569510029e-05, -+ 3.42170998132293449818e-05, -+ 3.48025843577636647915e-05, -+ 3.53671499276745119299e-05, -+ 3.59105101458437678133e-05, -+ 3.64323912718148200060e-05, -+ 3.69325323364901809465e-05, -+ 3.74106852692794952407e-05, -+ 3.78666150176288244058e-05, -+ 3.83000996588942581029e-05, -+ 3.87109305044850893402e-05, -+ 3.90989121962477274223e-05, -+ 3.94638627950426708552e-05, -+ 3.98056138614771284553e-05, -+ 4.01240105287611420687e-05, -+ 4.04189115676629857573e-05, -+ 4.06901894435291198787e-05, -+ 4.09377303653654542282e-05, -+ 4.11614343269538722871e-05, -+ 4.13612151399990495742e-05, -+ 4.15370004592994877942e-05, -+ 4.16887317999427647820e-05, -+ 4.18163645465287068582e-05, -+ 4.19198679544291165572e-05, -+ 4.19992251430971813499e-05, -+ 4.20544330814450761122e-05, -+ 4.20855025653108131916e-05, -+ 4.20924581870419940027e-05, -+ 4.20753382972270773108e-05, -+ 4.20341949586107831312e-05, -+ 4.19690938922323789214e-05, -+ 4.18801144158325268558e-05, -+ 4.17673493745770476031e-05, -+ 4.16309050641507942731e-05, -+ 4.14709011462787672121e-05, -+ 4.12874705567371297560e-05, -+ 4.10807594059191025335e-05, -+ 4.08509268720259451839e-05, -+ 4.05981450869582284656e-05, -+ 4.03225990149817188125e-05, -+ 4.00244863242588127953e-05, -+ 3.97040172513205211744e-05, -+ 3.93614144585763300172e-05, -+ 3.89969128849576671548e-05, -+ 3.86107595897814662080e-05, -+ 3.82032135899500682069e-05, -+ 3.77745456905820574433e-05, -+ 3.73250383091862464823e-05, -+ 3.68549852934909236125e-05, -+ 3.63646917330434846769e-05, -+ 3.58544737646997589589e-05, -+ 3.53246583721261741586e-05, -+ 3.47755831794332366546e-05, -+ 3.42075962390870128276e-05, -+ 3.36210558142060423280e-05, -+ 3.30163301553966777682e-05, -+ 3.23937972722568060207e-05, -+ 3.17538446996900900290e-05, -+ 3.10968692591733985816e-05, -+ 3.04232768151230764501e-05, -+ 2.97334820265093258108e-05, -+ 2.90279080938678783936e-05, -+ 2.83069865018621188567e-05, -+ 2.75711567575615524813e-05, -+ 2.68208661245598943643e-05, -+ 2.60565693531506030998e-05, -+ 2.52787284066631597003e-05, -+ 2.44878121841591343355e-05, -+ 2.36842962396411912224e-05, -+ 2.28686624979444416434e-05, -+ 2.20413989674784742564e-05, -+ 2.12029994499905229957e-05, -+ 2.03539632475213441687e-05, -+ 1.94947948667270345394e-05, -+ 1.86260037207404863615e-05, -+ 1.77481038287503190129e-05, -+ 1.68616135134610017573e-05, -+ 1.59670550966399525954e-05, -+ 1.50649545929016600080e-05, -+ 1.41558414019059438765e-05, -+ 1.32402479991802029098e-05, -+ 1.23187096257152244321e-05, -+ 1.13917639765278494500e-05, -+ 1.04599508883682767454e-05, -+ 9.52381202675309655368e-06, -+ 8.58389057250431938178e-06, -+ 7.64073090797513138387e-06, -+ 6.69487830314289765184e-06, -+ 5.74687860175188295145e-06, -+ 4.79727790767192774363e-06, -+ 3.84662227168647334824e-06, -+ 2.89545737884364760088e-06, -+ 1.94432823658253304009e-06, -+ 9.93778863798429985474e-07, -+ 4.43519810261418219453e-08, -+-9.03411298083134494987e-07, -+-1.84897177381668332505e-06, -+-2.79179246581568572222e-06, -+-3.73133891666547724968e-06, -+-4.66707949352351104895e-06, -+-5.59848568756837193684e-06, -+-6.52503241114909488603e-06, -+-7.44619829242155147390e-06, -+-8.36146596735429801020e-06, -+-9.27032236890755496482e-06, -+-1.01722590132379665735e-05, -+-1.10667722827682534897e-05, -+-1.19533637059645449316e-05, -+-1.28315402336673929602e-05, -+-1.37008145118236726118e-05, -+-1.45607051504696124636e-05, -+-1.54107369888173211751e-05, -+-1.62504413562997488372e-05, -+-1.70793563294315240981e-05, -+-1.78970269843458541098e-05, -+-1.87030056448704560027e-05, -+-1.94968521260079873374e-05, -+-2.02781339726898497515e-05, -+-2.10464266936743830125e-05, -+-2.18013139904647730040e-05, -+-2.25423879811231864039e-05, -+-2.32692494188629845134e-05, -+-2.39815079053020545374e-05, -+-2.46787820982652636209e-05, -+-2.53606999140241696946e-05, -+-2.60268987238786572637e-05, -+-2.66770255449520642306e-05, -+-2.73107372251350898203e-05, -+-2.79277006220566396152e-05, -+-2.85275927760007770367e-05, -+-2.91101010766786506953e-05, -+-2.96749234237720292370e-05, -+-3.02217683811674436194e-05, -+-3.07503553247967688486e-05, -+-3.12604145840304585829e-05, -+-3.17516875765274536082e-05, -+-3.22239269364954619744e-05, -+-3.26768966362916865294e-05, -+-3.31103721013135404044e-05, -+-3.35241403181086740208e-05, -+-3.39179999356772221173e-05, -+-3.42917613599035768068e-05, -+-3.46452468410814200988e-05, -+-3.49782905544949971623e-05, -+-3.52907386740210617191e-05, -+-3.55824494387227893157e-05, -+-3.58532932124095292024e-05, -+-3.61031525361412189944e-05, -+-3.63319221736595660043e-05, -+-3.65395091497331203439e-05, -+-3.67258327814061905970e-05, -+-3.68908247021470958485e-05, -+-3.70344288788946495372e-05, -+-3.71566016220048470271e-05, -+-3.72573115881061459097e-05, -+-3.73365397758733679086e-05, -+-3.73942795147359094356e-05, -+-3.74305364465390174970e-05, -+-3.74453285001817191228e-05, -+-3.74386858592581299020e-05, -+-3.74106509227334344111e-05, -+-3.73612782586900054964e-05, -+-3.72906345511812774523e-05, -+-3.71987985402384284698e-05, -+-3.70858609550741078051e-05, -+-3.69519244405358592356e-05, -+-3.67971034768620346741e-05, -+-3.66215242927991649845e-05, -+-3.64253247721413610217e-05, -+-3.62086543537608289011e-05, -+-3.59716739251909398806e-05, -+-3.57145557098436036985e-05, -+-3.54374831479307815388e-05, -+-3.51406507711717790501e-05, -+-3.48242640713705212661e-05, -+-3.44885393629439755150e-05, -+-3.41337036395026344345e-05, -+-3.37599944245618602615e-05, -+-3.33676596164906268116e-05, -+-3.29569573277930418366e-05, -+-3.25281557188254321234e-05, -+-3.20815328260544299979e-05, -+-3.16173763849646847373e-05, -+-3.11359836477270585640e-05, -+-3.06376611957413178553e-05, -+-3.01227247471705252121e-05, -+-2.95914989595860117668e-05, -+-2.90443172278450244467e-05, -+-2.84815214773259415084e-05, -+-2.79034619526477284249e-05, -+-2.73104970020026914545e-05, -+-2.67029928572347473455e-05, -+-2.60813234097965965382e-05, -+-2.54458699827217350983e-05, -+-2.47970210987495716533e-05, -+-2.41351722447432573014e-05, -+-2.34607256325420285845e-05, -+-2.27740899563922217575e-05, -+-2.20756801471030884767e-05, -+-2.13659171230650388217e-05, -+-2.06452275383031910749e-05, -+-1.99140435276834237366e-05, -+-1.91728024494465332597e-05, -+-1.84219466252117046706e-05, -+-1.76619230776150628139e-05, -+-1.68931832657115450086e-05, -+-1.61161828183312975558e-05, -+-1.53313812655206427630e-05, -+-1.45392417682358304494e-05, -+-1.37402308464459345215e-05, -+-1.29348181058055242533e-05, -+-1.21234759630454037166e-05, -+-1.13066793702690812049e-05, -+-1.04849055382779459772e-05, -+-9.65863365911334948940e-06, -+-8.82834462796514155621e-06, -+-7.99452076460905629502e-06, -+-7.15764553453369098759e-06, -+-6.31820326991743474922e-06, -+-5.47667889061570897704e-06, -+-4.63355762531863929758e-06, -+-3.78932473303858924915e-06, -+-2.94446522508681059839e-06, -+-2.09946358769777104725e-06, -+-1.25480350545903780141e-06, -+-4.10967585703884757521e-07, -+ 4.31562915977009008788e-07, -+ 1.27230836894944277571e-06, -+ 2.11079103932071460005e-06, -+ 2.94653536014252898618e-06, -+ 3.77906819987967961097e-06, -+ 4.60791912899369108820e-06, -+ 5.43262068449194016279e-06, -+ 6.25270863229422647450e-06, -+ 7.06772222727031654239e-06, -+ 7.87720447080152108251e-06, -+ 8.68070236573491179038e-06, -+ 9.47776716855934883059e-06, -+ 1.02679546387046329188e-05, -+ 1.10508252847855289948e-05, -+ 1.18259446076950094435e-05, -+ 1.25928833403731488022e-05, -+ 1.33512176841488130493e-05, -+ 1.41005295415132480126e-05, -+ 1.48404067452006041290e-05, -+ 1.55704432834508311935e-05, -+ 1.62902395213322402135e-05, -+ 1.69994024180030318645e-05, -+ 1.76975457398040286305e-05, -+ 1.83842902690431043002e-05, -+ 1.90592640083929755197e-05, -+ 1.97221023807678906147e-05, -+ 2.03724484245830909945e-05, -+ 2.10099529842914574005e-05, -+ 2.16342748960969371002e-05, -+ 2.22450811687472009364e-05, -+ 2.28420471593103576108e-05, -+ 2.34248567438443574510e-05, -+ 2.39932024828722749476e-05, -+ 2.45467857815675249479e-05, -+ 2.50853170445967065243e-05, -+ 2.56085158254919929746e-05, -+ 2.61161109705264067420e-05, -+ 2.66078407569898643540e-05, -+ 2.70834530258070006151e-05, -+ 2.75427053084297310910e-05, -+ 2.79853649479419435960e-05, -+ 2.84112092143175989727e-05, -+ 2.88200254137772721131e-05, -+ 2.92116109921902309310e-05, -+ 2.95857736324748295058e-05, -+ 2.99423313459514552895e-05, -+ 3.02811125576063902359e-05, -+ 3.06019561852344731414e-05, -+ 3.09047117124088772445e-05, -+ 3.11892392552770306917e-05, -+ 3.14554096231257185974e-05, -+ 3.17031043727105386106e-05, -+ 3.19322158563235434462e-05, -+ 3.21426472635838068469e-05, -+ 3.23343126569389799764e-05, -+ 3.25071370008686157485e-05, -+ 3.26610561847839823827e-05, -+ 3.27960170396232209987e-05, -+ 3.29119773481435616428e-05, -+ 3.30089058489176179569e-05, -+ 3.30867822340391137381e-05, -+ 3.31455971405566354542e-05, -+ 3.31853521356474453628e-05, -+ 3.32060596955532425618e-05, -+ 3.32077431783010264656e-05, -+ 3.31904367902360999997e-05, -+ 3.31541855463981258254e-05, -+ 3.30990452247738323123e-05, -+ 3.30250823144645263966e-05, -+ 3.29323739578086778848e-05, -+ 3.28210078865044069620e-05, -+ 3.26910823517787598727e-05, -+ 3.25427060486570274289e-05, -+ 3.23759980343831654933e-05, -+ 3.21910876410516532862e-05, -+ 3.19881143825098785360e-05, -+ 3.17672278555962777865e-05, -+ 3.15285876357804020743e-05, -+ 3.12723631672755098660e-05, -+ 3.09987336476968641276e-05, -+ 3.07078879073422307631e-05, -+ 3.04000242831731254834e-05, -+ 3.00753504875796523151e-05, -+ 2.97340834720133863225e-05, -+ 2.93764492855759244065e-05, -+ 2.90026829286541534467e-05, -+ 2.86130282016945522135e-05, -+ 2.82077375492130921937e-05, -+ 2.77870718991382409868e-05, -+ 2.73513004975885902525e-05, -+ 2.69007007391876059731e-05, -+ 2.64355579930219527422e-05, -+ 2.59561654243505824063e-05, -+ 2.54628238121749757804e-05, -+ 2.49558413627831115046e-05, -+ 2.44355335193822060570e-05, -+ 2.39022227679302646662e-05, -+ 2.33562384393019751726e-05, -+ 2.27979165078862079359e-05, -+ 2.22275993867542926926e-05, -+ 2.16456357195166269815e-05, -+ 2.10523801689935258924e-05, -+ 2.04481932028270123260e-05, -+ 1.98334408761695914203e-05, -+ 1.92084946115600319473e-05, -+ 1.85737309761447836221e-05, -+ 1.79295314563576179442e-05, -+ 1.72762822302007563351e-05, -+ 1.66143739372523043473e-05, -+ 1.59442014465590105223e-05, -+ 1.52661636225209913461e-05, -+ 1.45806630889290942863e-05, -+ 1.38881059912848947536e-05, -+ 1.31889017575441241904e-05, -+ 1.24834628574239182218e-05, -+ 1.17722045604144076358e-05, -+ 1.10555446926362083376e-05, -+ 1.03339033926850970682e-05, -+ 9.60770286660610835401e-06, -+ 8.87736714213917295769e-06, -+ 8.14332182237846214528e-06, -+ 7.40599383898811708220e-06, -+ 6.66581120511662847053e-06, -+ 5.92320276815220692627e-06, -+ 5.17859796246125674333e-06, -+ 4.43242656225190390784e-06, -+ 3.68511843470406844027e-06, -+ 2.93710329350725519965e-06, -+ 2.18881045294667824256e-06, -+ 1.44066858267776568184e-06, -+ 6.93105463328498643878e-07, -+-5.34522569318000109946e-08, -+-7.98579304717572919173e-07, -+-1.54185202251970832288e-06, -+-2.28284860840320051088e-06, -+-3.02114935421031389665e-06, -+-3.75633688210878496775e-06, -+-4.48799637936313885382e-06, -+-5.21571583119760455970e-06, -+-5.93908625161027179838e-06, -+-6.65770191203593872154e-06, -+-7.37116056769570928293e-06, -+-8.07906368153382318078e-06, -+-8.78101664560747212731e-06, -+-9.47662899980729766419e-06, -+-1.01655146477980716876e-05, -+-1.08472920700360401147e-05, -+-1.15215845337792326716e-05, -+-1.21880202999511892778e-05, -+-1.28462328267551614196e-05, -+-1.34958609699263177819e-05, -+-1.41365491795134746316e-05, -+-1.47679476930840737262e-05, -+-1.53897127252478330606e-05, -+-1.60015066533978296873e-05, -+-1.66029981995690071228e-05, -+-1.71938626083174473280e-05, -+-1.77737818205255124692e-05, -+-1.83424446430409821820e-05, -+-1.88995469140607142496e-05, -+-1.94447916641716418988e-05, -+-1.99778892729651633619e-05, -+-2.04985576211432968317e-05, -+-2.10065222380378098066e-05, -+-2.15015164444660525898e-05, -+-2.19832814908509086081e-05, -+-2.24515666905336362430e-05, -+-2.29061295482131846272e-05, -+-2.33467358834453286897e-05, -+-2.37731599491474201167e-05, -+-2.41851845450333852378e-05, -+-2.45826011259452240434e-05, -+-2.49652099050124548756e-05, -+-2.53328199515970210081e-05, -+-2.56852492839710685329e-05, -+-2.60223249566979663422e-05, -+-2.63438831426579298076e-05, -+-2.66497692096954663589e-05, -+-2.69398377918485816931e-05, -+-2.72139528551308018016e-05, -+-2.74719877578380960005e-05, -+-2.77138253053556592794e-05, -+-2.79393577994475523249e-05, -+-2.81484870820020636713e-05, -+-2.83411245732301139656e-05, -+-2.85171913042964311541e-05, -+-2.86766179443786176822e-05, -+-2.88193448221488309965e-05, -+-2.89453219416760952935e-05, -+-2.90545089927504981216e-05, -+-2.91468753556345132793e-05, -+-2.92224001002483448552e-05, -+-2.92810719798009543599e-05, -+-2.93228894188808181459e-05, -+-2.93478604960236810328e-05, -+-2.93560029207774113129e-05, -+-2.93473440052880433669e-05, -+-2.93219206304335843936e-05, -+-2.92797792065350247323e-05, -+-2.92209756286776301080e-05, -+-2.91455752266783351279e-05, -+-2.90536527097378728982e-05, -+-2.89452921058199178666e-05, -+-2.88205866958015281636e-05, -+-2.86796389424427922371e-05, -+-2.85225604142267152093e-05, -+-2.83494717041206751521e-05, -+-2.81605023433202391432e-05, -+-2.79557907100283667510e-05, -+-2.77354839333381227289e-05, -+-2.74997377922758771290e-05, -+-2.72487166100799959093e-05, -+-2.69825931437795252883e-05, -+-2.67015484691465684885e-05, -+-2.64057718610977712947e-05, -+-2.60954606696212069907e-05, -+-2.57708201913090847589e-05, -+-2.54320635365780473264e-05, -+-2.50794114926622185510e-05, -+-2.47130923824611631432e-05, -+-2.43333419193429083098e-05, -+-2.39404030579782670638e-05, -+-2.35345258413101434184e-05, -+-2.31159672437494752078e-05, -+-2.26849910106949353332e-05, -+-2.22418674944758635930e-05, -+-2.17868734868193039472e-05, -+-2.13202920479438652059e-05, -+-2.08424123323838041491e-05, -+-2.03535294116561999106e-05, -+-1.98539440938636343103e-05, -+-1.93439627403565497755e-05, -+-1.88238970795673100412e-05, -+-1.82940640181116715769e-05, -+-1.77547854492869263538e-05, -+-1.72063880590754648210e-05, -+-1.66492031297704090782e-05, -+-1.60835663413408166554e-05, -+-1.55098175706546329380e-05, -+-1.49283006886787883053e-05, -+-1.43393633557766034665e-05, -+-1.37433568152237134072e-05, -+-1.31406356850657396885e-05, -+-1.25315577484303698698e-05, -+-1.19164837424470248790e-05, -+-1.12957771458482026110e-05, -+-1.06698039654265613285e-05, -+-1.00389325214426427445e-05, -+-9.40353323211844157182e-06, -+-8.76397839734067131087e-06, -+-8.12064198169950727862e-06, -+-7.47389939698852350989e-06, -+-6.82412728429159437049e-06, -+-6.17170329578283326645e-06, -+-5.51700587636662085001e-06, -+-4.86041404527424057491e-06, -+-4.20230717776569626185e-06, -+-3.54306478703081491720e-06, -+-2.88306630643768218789e-06, -+-2.22269087224340068095e-06, -+-1.56231710689249263685e-06, -+-9.02322903026265212716e-07, -+-2.43085208325657879777e-07, -+ 4.15020188692070241853e-07, -+ 1.07161887179235378480e-06, -+ 1.72633800896124487047e-06, -+ 2.37880656301163715107e-06, -+ 3.02865550076134820403e-06, -+ 3.67551800066570465779e-06, -+ 4.31902965876675653769e-06, -+ 4.95882869287509108695e-06, -+ 5.59455614484735050385e-06, -+ 6.22585608085616216224e-06, -+ 6.85237578953995891761e-06, -+ 7.47376597792307623553e-06, -+ 8.08968096499781815715e-06, -+ 8.69977887286206749402e-06, -+ 9.30372181530736666231e-06, -+ 9.90117608375414723029e-06, -+ 1.04918123304324667667e-05, -+ 1.10753057487085165546e-05, -+ 1.16513362504588705059e-05, -+ 1.22195886403962862164e-05, -+ 1.27797527872529815987e-05, -+ 1.33315237917292095805e-05, -+ 1.38746021511168710365e-05, -+ 1.44086939205101016335e-05, -+ 1.49335108705172178858e-05, -+ 1.54487706413894936150e-05, -+ 1.59541968934863105428e-05, -+ 1.64495194539962877323e-05, -+ 1.69344744598370269687e-05, -+ 1.74088044966656047203e-05, -+ 1.78722587339096677364e-05, -+ 1.83245930557734450217e-05, -+ 1.87655701881329496747e-05, -+ 1.91949598212630230727e-05, -+ 1.96125387283323720589e-05, -+ 2.00180908796079946171e-05, -+ 2.04114075523055411008e-05, -+ 2.07922874360462036562e-05, -+ 2.11605367338478548244e-05, -+ 2.15159692586163032817e-05, -+ 2.18584065250839677179e-05, -+ 2.21876778371520620508e-05, -+ 2.25036203706003066312e-05, -+ 2.28060792511126929382e-05, -+ 2.30949076276010261842e-05, -+ 2.33699667407799707231e-05, -+ 2.36311259869688547377e-05, -+ 2.38782629770920889936e-05, -+ 2.41112635908534832393e-05, -+ 2.43300220260626135784e-05, -+ 2.45344408430947687194e-05, -+ 2.47244310044678461521e-05, -+ 2.48999119095234487111e-05, -+ 2.50608114242014547006e-05, -+ 2.52070659059005263759e-05, -+ 2.53386202234201725390e-05, -+ 2.54554277719819088525e-05, -+ 2.55574504833309083937e-05, -+ 2.56446588309218829473e-05, -+ 2.57170318301951886415e-05, -+ 2.57745570339536455825e-05, -+ 2.58172305228509982138e-05, -+ 2.58450568910080320990e-05, -+ 2.58580492267732674574e-05, -+ 2.58562290886494391582e-05, -+ 2.58396264764083687885e-05, -+ 2.58082797974207070447e-05, -+ 2.57622358282285832381e-05, -+ 2.57015496713930713401e-05, -+ 2.56262847076503301675e-05, -+ 2.55365125434126198959e-05, -+ 2.54323129536535378888e-05, -+ 2.53137738202205607126e-05, -+ 2.51809910656159463322e-05, -+ 2.50340685822968625073e-05, -+ 2.48731181575412977117e-05, -+ 2.46982593939325721589e-05, -+ 2.45096196255167505238e-05, -+ 2.43073338296873121584e-05, -+ 2.40915445348619378086e-05, -+ 2.38624017240045997246e-05, -+ 2.36200627340624288075e-05, -+ 2.33646921513807236321e-05, -+ 2.30964617031644264128e-05, -+ 2.28155501450558444859e-05, -+ 2.25221431449012520778e-05, -+ 2.22164331627798575491e-05, -+ 2.18986193273720365431e-05, -+ 2.15689073087443379398e-05, -+ 2.12275091876318188378e-05, -+ 2.08746433212990305033e-05, -+ 2.05105342060640502609e-05, -+ 2.01354123365703269947e-05, -+ 1.97495140618939641253e-05, -+ 1.93530814385750261550e-05, -+ 1.89463620806633047968e-05, -+ 1.85296090068704985814e-05, -+ 1.81030804849221997979e-05, -+ 1.76670398732044751401e-05, -+ 1.72217554598013985296e-05, -+ 1.67675002990209279609e-05, -+ 1.63045520455078192621e-05, -+ 1.58331927860449225669e-05, -+ 1.53537088691371193265e-05, -+ 1.48663907324963997689e-05, -+ 1.43715327285100159978e-05, -+ 1.38694329478100649496e-05, -+ 1.33603930410508834665e-05, -+ 1.28447180389832295180e-05, -+ 1.23227161709552708244e-05, -+ 1.17946986819301291035e-05, -+ 1.12609796481351171312e-05, -+ 1.07218757914499571946e-05, -+ 1.01777062926427738516e-05, -+ 9.62879260356504592831e-06, -+ 9.07545825840731586903e-06, -+ 8.51802868414534395823e-06, -+ 7.95683101026131923061e-06, -+ 7.39219387787010935662e-06, -+ 6.82444724835357750922e-06, -+ 6.25392221161505916386e-06, -+ 5.68095079406488222078e-06, -+ 5.10586576644759276318e-06, -+ 4.52900045162168937197e-06, -+ 3.95068853240210902949e-06, -+ 3.37126385957580590002e-06, -+ 2.79106026020026960787e-06, -+ 2.21041134629440781136e-06, -+ 1.62965032403097053739e-06, -+ 1.04910980353893797621e-06, -+ 4.69121609423969816268e-07, -+-1.09983407885784446779e-07, -+-6.87875559861819363080e-07, -+-1.26422650655941540912e-06, -+-1.83870944215866707785e-06, -+-2.41099927925814251037e-06, -+-2.98077283181781552669e-06, -+-3.54770899664894408157e-06, -+-4.11148893334953399492e-06, -+-4.67179624258384839990e-06, -+-5.22831714261491216074e-06, -+-5.78074064397335153019e-06, -+-6.32875872218480591626e-06, -+-6.87206648846043886310e-06, -+-7.41036235823793521568e-06, -+-7.94334821749933495355e-06, -+-8.47072958676628828367e-06, -+-8.99221578268483114820e-06, -+-9.50752007711151433478e-06, -+-1.00163598536144939110e-05, -+-1.05184567613050262248e-05, -+-1.10135368659148606880e-05, -+-1.15013307980458232298e-05, -+-1.19815738984936175071e-05, -+-1.24540063605928145280e-05, -+-1.29183733694884611521e-05, -+-1.33744252382685912655e-05, -+-1.38219175408834683421e-05, -+-1.42606112417824770782e-05, -+-1.46902728222004355977e-05, -+-1.51106744030272206920e-05, -+-1.55215938641985491263e-05, -+-1.59228149605396966692e-05, -+-1.63141274340170367916e-05, -+-1.66953271223259263928e-05, -+-1.70662160637601778752e-05, -+-1.74266025983238355662e-05, -+-1.77763014650210005691e-05, -+-1.81151338952815387428e-05, -+-1.84429277024754141470e-05, -+-1.87595173674722256573e-05, -+-1.90647441202047199617e-05, -+-1.93584560171974732774e-05, -+-1.96405080150238890778e-05, -+-1.99107620396580777466e-05, -+-2.01690870516893970240e-05, -+-2.04153591073708575137e-05, -+-2.06494614154744169461e-05, -+-2.08712843899290058163e-05, -+-2.10807256982194106203e-05, -+-2.12776903055268819069e-05, -+-2.14620905145943367527e-05, -+-2.16338460013017256061e-05, -+-2.17928838459405791773e-05, -+-2.19391385601769272338e-05, -+-2.20725521096971615139e-05, -+-2.21930739325313472097e-05, -+-2.23006609530529530257e-05, -+-2.23952775916547660337e-05, -+-2.24768957701059413827e-05, -+-2.25454949125917081373e-05, -+-2.26010619424491719610e-05, -+-2.26435912746056351556e-05, -+-2.26730848037337861828e-05, -+-2.26895518881395304210e-05, -+-2.26930093293992605151e-05, -+-2.26834813477678370105e-05, -+-2.26609995533789395977e-05, -+-2.26256029132635929800e-05, -+-2.25773377142134946906e-05, -+-2.25162575215193229503e-05, -+-2.24424231336153037980e-05, -+-2.23559025326656501465e-05, -+-2.22567708311276078921e-05, -+-2.21451102143313804113e-05, -+-2.20210098791169147888e-05, -+-2.18845659685713447666e-05, -+-2.17358815029120373732e-05, -+-2.15750663065627956596e-05, -+-2.14022369314727249265e-05, -+-2.12175165767294450026e-05, -+-2.10210350045200421447e-05, -+-2.08129284524956139116e-05, -+-2.05933395425968121279e-05, -+-2.03624171863999439073e-05, -+-2.01203164870448847703e-05, -+-1.98671986378080534994e-05, -+-1.96032308173856533286e-05, -+-1.93285860819534852074e-05, -+-1.90434432540722883950e-05, -+-1.87479868085084750535e-05, -+-1.84424067550420635135e-05, -+-1.81268985183354106028e-05, -+-1.78016628149372209476e-05, -+-1.74669055274989030828e-05, -+-1.71228375762811146975e-05, -+-1.67696747880257406472e-05, -+-1.64076377622852373006e-05, -+-1.60369517352758793533e-05, -+-1.56578464413495735093e-05, -+-1.52705559721640566414e-05, -+-1.48753186336378656238e-05, -+-1.44723768007754817841e-05, -+-1.40619767704562352530e-05, -+-1.36443686122615369144e-05, -+-1.32198060174485617084e-05, -+-1.27885461461470160532e-05, -+-1.23508494728771689751e-05, -+-1.19069796304737485969e-05, -+-1.14572032525241123438e-05, -+-1.10017898143939981797e-05, -+-1.05410114729497751473e-05, -+-1.00751429050663908628e-05, -+-9.60446114501671036024e-06, -+-9.12924542083821511740e-06, -+-8.64977698977298705156e-06, -+-8.16633897287741896158e-06, -+-7.67921618889827246499e-06, -+-7.18869498751202211574e-06, -+-6.69506308202449553879e-06, -+-6.19860938162804727016e-06, -+-5.69962382331348281457e-06, -+-5.19839720353396213883e-06, -+-4.69522100971802372742e-06, -+-4.19038725172889743185e-06, -+-3.68418829336696433132e-06, -+-3.17691668401197745318e-06, -+-2.66886499050160637978e-06, -+-2.16032562934221739981e-06, -+-1.65159069934772865291e-06, -+-1.14295181480165719692e-06, -+-6.34699939237223993940e-07, -+-1.27125219930865964068e-07, -+ 3.79483176804446976763e-07, -+ 8.84837229415048084051e-07, -+ 1.38865022392344135295e-06, -+ 1.89063691565660948537e-06, -+ 2.39051368980350543056e-06, -+ 2.88799872070356053645e-06, -+ 3.38281212979515968504e-06, -+ 3.87467614211226955731e-06, -+ 4.36331524126018218350e-06, -+ 4.84845632277730857507e-06, -+ 5.32982884579943108584e-06, -+ 5.80716498294156890627e-06, -+ 6.28019976832197123205e-06, -+ 6.74867124362975824505e-06, -+ 7.21232060217923931738e-06, -+ 7.67089233085512087109e-06, -+ 8.12413434987819258522e-06, -+ 8.57179815031460507597e-06, -+ 9.01363892925431026452e-06, -+ 9.44941572258580350576e-06, -+ 9.87889153529582866875e-06, -+ 1.03018334692242354077e-05, -+ 1.07180128482058532928e-05, -+ 1.11272053405328737749e-05, -+ 1.15291910786727369798e-05, -+ 1.19237547761785921742e-05, -+ 1.23106858417307881825e-05, -+ 1.26897784902497355293e-05, -+ 1.30608318510224895531e-05, -+ 1.34236500727868487704e-05, -+ 1.37780424257190294344e-05, -+ 1.41238234002725815088e-05, -+ 1.44608128028181916441e-05, -+ 1.47888358480361837552e-05, -+ 1.51077232480150609343e-05, -+ 1.54173112980111264947e-05, -+ 1.57174419588311981054e-05, -+ 1.60079629357866409767e-05, -+ 1.62887277541956994331e-05, -+ 1.65595958313870623361e-05, -+ 1.68204325451708860712e-05, -+ 1.70711092987549151222e-05, -+ 1.73115035820617087312e-05, -+ 1.75414990294297246641e-05, -+ 1.77609854736682751155e-05, -+ 1.79698589964435695681e-05, -+ 1.81680219749743536840e-05, -+ 1.83553831250179843454e-05, -+ 1.85318575401295563383e-05, -+ 1.86973667271814836071e-05, -+ 1.88518386381246428555e-05, -+ 1.89952076979892261869e-05, -+ 1.91274148291101984921e-05, -+ 1.92484074715740798728e-05, -+ 1.93581395998826688587e-05, -+ 1.94565717358317040323e-05, -+ 1.95436709576050705363e-05, -+ 1.96194109050871230563e-05, -+ 1.96837717813977941246e-05, -+ 1.97367403506575926565e-05, -+ 1.97783099319904582180e-05, -+ 1.98084803897790467670e-05, -+ 1.98272581201802304074e-05, -+ 1.98346560339216278375e-05, -+ 1.98306935353937785049e-05, -+ 1.98153964980584857704e-05, -+ 1.97887972361948640476e-05, -+ 1.97509344730071558156e-05, -+ 1.97018533051198989033e-05, -+ 1.96416051634883520843e-05, -+ 1.95702477707543367439e-05, -+ 1.94878450950789703635e-05, -+ 1.93944673004863832040e-05, -+ 1.92901906937534684103e-05, -+ 1.91750976678850051373e-05, -+ 1.90492766422124609142e-05, -+ 1.89128219991563888266e-05, -+ 1.87658340176993620855e-05, -+ 1.86084188036114926950e-05, -+ 1.84406882164763881947e-05, -+ 1.82627597935659933724e-05, -+ 1.80747566706147357355e-05, -+ 1.78768074995447826664e-05, -+ 1.76690463631958512617e-05, -+ 1.74516126871156478269e-05, -+ 1.72246511484645271060e-05, -+ 1.69883115820999146554e-05, -+ 1.67427488838910094079e-05, -+ 1.64881229113318102759e-05, -+ 1.62245983815127213317e-05, -+ 1.59523447665149745417e-05, -+ 1.56715361862937387256e-05, -+ 1.53823512991161662699e-05, -+ 1.50849731896229228884e-05, -+ 1.47795892545813357618e-05, -+ 1.44663910864051258596e-05, -+ 1.41455743545015973133e-05, -+ 1.38173386845338111450e-05, -+ 1.34818875356564122405e-05, -+ 1.31394280758153236577e-05, -+ 1.27901710551714238936e-05, -+ 1.24343306777357970924e-05, -+ 1.20721244712898652016e-05, -+ 1.17037731556691947766e-05, -+ 1.13295005094903200078e-05, -+ 1.09495332354001166718e-05, -+ 1.05641008239284915968e-05, -+ 1.01734354160254741075e-05, -+ 9.77777166436417707733e-06, -+ 9.37734659349238440105e-06, -+ 8.97239945891504566951e-06, -+ 8.56317160519109046130e-06, -+ 8.14990632312829315351e-06, -+ 7.73284870615977176810e-06, -+ 7.31224550598672419900e-06, -+ 6.88834498757161637657e-06, -+ 6.46139678356662984916e-06, -+ 6.03165174826215254474e-06, -+ 5.59936181114026503485e-06, -+ 5.16477983011814751843e-06, -+ 4.72815944456637594131e-06, -+ 4.28975492818819883339e-06, -+ 3.84982104183822503198e-06, -+ 3.40861288638080421604e-06, -+ 2.96638575565200338164e-06, -+ 2.52339498962473315831e-06, -+ 2.07989582785497810255e-06, -+ 1.63614326329362652845e-06, -+ 1.19239189654723987055e-06, -+ 7.48895790669445095407e-07, -+ 3.05908326571625776241e-07, -+-1.36317940881114572753e-07, -+-5.77531425986414698518e-07, -+-1.01748165446873717438e-06, -+-1.45591940480376818372e-06, -+-1.89259684853121109570e-06, -+-2.32726768946181945073e-06, -+-2.75968730172187791391e-06, -+-3.18961286654260444098e-06, -+-3.61680350772475395115e-06, -+-4.04102042570235190153e-06, -+-4.46202703013145677961e-06, -+-4.87958907093086315863e-06, -+-5.29347476770270431638e-06, -+-5.70345493746202430210e-06, -+-6.10930312060542652779e-06, -+-6.51079570505022606116e-06, -+-6.90771204847647766264e-06, -+-7.29983459860577372710e-06, -+-7.68694901145177016447e-06, -+-8.06884426747877637565e-06, -+-8.44531278560606176982e-06, -+-8.81615053499690261524e-06, -+-9.18115714457292360416e-06, -+-9.54013601019537525608e-06, -+-9.89289439945689410725e-06, -+-1.02392435540285157503e-05, -+-1.05789987895082151180e-05, -+-1.09119795927181496489e-05, -+-1.12380097164049367058e-05, -+-1.15569172712818179387e-05, -+-1.18685348153817650919e-05, -+-1.21726994406635834228e-05, -+-1.24692528568320288901e-05, -+-1.27580414723287455134e-05, -+-1.30389164724542902805e-05, -+-1.33117338945781214641e-05, -+-1.35763547004100975057e-05, -+-1.38326448452840637915e-05, -+-1.40804753444306167702e-05, -+-1.43197223362026314689e-05, -+-1.45502671422277009592e-05, -+-1.47719963244507672032e-05, -+-1.49848017390525759050e-05, -+-1.51885805872105738001e-05, -+-1.53832354626835289546e-05, -+-1.55686743961984593867e-05, -+-1.57448108966214301034e-05, -+-1.59115639888950593595e-05, -+-1.60688582487281346781e-05, -+-1.62166238340240249699e-05, -+-1.63547965130369332254e-05, -+-1.64833176892467266300e-05, -+-1.66021344229449986304e-05, -+-1.67111994495269690472e-05, -+-1.68104711944856884120e-05, -+-1.68999137851070388113e-05, -+-1.69794970588658022861e-05, -+-1.70491965685248872658e-05, -+-1.71089935839418872147e-05, -+-1.71588750905891277256e-05, -+-1.71988337847946457871e-05, -+-1.72288680657142012447e-05, -+-1.72489820240458028352e-05, -+-1.72591854275000641512e-05, -+-1.72594937030417242213e-05, -+-1.72499279159197036566e-05, -+-1.72305147455039143491e-05, -+-1.72012864579503712398e-05, -+-1.71622808757165273689e-05, -+-1.71135413439511928759e-05, -+-1.70551166937853976150e-05, -+-1.69870612025510246137e-05, -+-1.69094345509577617692e-05, -+-1.68223017772587667151e-05, -+-1.67257332284380452606e-05, -+-1.66198045084538685654e-05, -+-1.65045964235747666643e-05, -+-1.63801949248439752678e-05, -+-1.62466910477154159362e-05, -+-1.61041808488969476394e-05, -+-1.59527653404471681951e-05, -+-1.57925504211673684571e-05, -+-1.56236468053350227754e-05, -+-1.54461699488246402123e-05, -+-1.52602399726646910730e-05, -+-1.50659815840795875837e-05, -+-1.48635239950677219589e-05, -+-1.46530008385678102385e-05, -+-1.44345500822663306819e-05, -+-1.42083139401014696147e-05, -+-1.39744387815186386459e-05, -+-1.37330750385350818741e-05, -+-1.34843771106714372927e-05, -+-1.32285032678095108182e-05, -+-1.29656155510367461763e-05, -+-1.26958796715383549959e-05, -+-1.24194649075998671690e-05, -+-1.21365439997829936740e-05, -+-1.18472930443392576808e-05, -+-1.15518913849262173693e-05, -+-1.12505215026924608397e-05, -+-1.09433689047985292748e-05, -+-1.06306220114370569618e-05, -+-1.03124720414310326811e-05, -+-9.98911289646390806746e-06, -+-9.66074104402634771841e-06, -+-9.32755539913410898457e-06, -+-8.98975720490331666607e-06, -+-8.64754991204318386249e-06, -+-8.30113905734212395051e-06, -+-7.95073214121866026069e-06, -+-7.59653850440942178638e-06, -+-7.23876920386707314615e-06, -+-6.87763688794204854321e-06, -+-6.51335567091628095621e-06, -+-6.14614100697516552689e-06, -+-5.77620956367455239778e-06, -+-5.40377909498920278296e-06, -+-5.02906831401159492038e-06, -+-4.65229676537581108160e-06, -+-4.27368469748049481391e-06, -+-3.89345293458471427688e-06, -+-3.51182274885061115744e-06, -+-3.12901573240642411555e-06, -+-2.74525366950255710500e-06, -+-2.36075840884032086628e-06, -+-1.97575173612730443720e-06, -+-1.59045524696390774673e-06, -+-1.20509022010166682739e-06, -+-8.19877491164466545524e-07, -+-4.35037326897878480005e-07, -+-5.07893000186937941852e-08, -+ 3.32647835264701963937e-07, -+ 7.15056266991011401958e-07, -+ 1.09621924837422310365e-06, -+ 1.47592121985241872538e-06, -+ 1.85394793018892599705e-06, -+ 2.23008655655825313813e-06, -+ 2.60412582354907889203e-06, -+ 2.97585612102449336496e-06, -+ 3.34506962075543128396e-06, -+ 3.71156039179419859137e-06, -+ 4.07512451449323400283e-06, -+ 4.43556019312523663384e-06, -+ 4.79266786703672172316e-06, -+ 5.14625032027519291555e-06, -+ 5.49611278963019283487e-06, -+ 5.84206307102959016220e-06, -+ 6.18391162423353208402e-06, -+ 6.52147167576954129561e-06, -+ 6.85455932005260181654e-06, -+ 7.18299361864097611125e-06, -+ 7.50659669756249047314e-06, -+ 7.82519384267587422464e-06, -+ 8.13861359300433846395e-06, -+ 8.44668783199705641891e-06, -+ 8.74925187666988167100e-06, -+ 9.04614456457850991435e-06, -+ 9.33720833857896873390e-06, -+ 9.62228932933213677251e-06, -+ 9.90123743550565465295e-06, -+ 1.01739064016425803086e-05, -+ 1.04401538936425447330e-05, -+ 1.06998415718315421479e-05, -+ 1.09528351615697443715e-05, -+ 1.11990045213757959499e-05, -+ 1.14382237085241558977e-05, -+ 1.16703710420870291280e-05, -+ 1.18953291633899048006e-05, -+ 1.21129850938512417829e-05, -+ 1.23232302901790470909e-05, -+ 1.25259606968983349296e-05, -+ 1.27210767961849803022e-05, -+ 1.29084836549834598316e-05, -+ 1.30880909693871328668e-05, -+ 1.32598131062616946208e-05, -+ 1.34235691420937951136e-05, -+ 1.35792828990487302932e-05, -+ 1.37268829782224906786e-05, -+ 1.38663027900751689578e-05, -+ 1.39974805820346134686e-05, -+ 1.41203594632604494623e-05, -+ 1.42348874265606466504e-05, -+ 1.43410173674542311574e-05, -+ 1.44387071003753392044e-05, -+ 1.45279193720158173131e-05, -+ 1.46086218718049036649e-05, -+ 1.46807872395258838879e-05, -+ 1.47443930700731856367e-05, -+ 1.47994219153501084768e-05, -+ 1.48458612833167961215e-05, -+ 1.48837036341919119975e-05, -+ 1.49129463738179148723e-05, -+ 1.49335918441997313264e-05, -+ 1.49456473112284446691e-05, -+ 1.49491249496032089275e-05, -+ 1.49440418249668886146e-05, -+ 1.49304198732706183515e-05, -+ 1.49082858773864185118e-05, -+ 1.48776714409868946381e-05, -+ 1.48386129597128356167e-05, -+ 1.47911515896521751179e-05, -+ 1.47353332131532132959e-05, -+ 1.46712084019985736114e-05, -+ 1.45988323779665271851e-05, -+ 1.45182649708080687578e-05, -+ 1.44295705736699748613e-05, -+ 1.43328180959947710691e-05, -+ 1.42280809139304630388e-05, -+ 1.41154368182840922366e-05, -+ 1.39949679600544020416e-05, -+ 1.38667607935803263323e-05, -+ 1.37309060173433526632e-05, -+ 1.35874985124628946476e-05, -+ 1.34366372789253006354e-05, -+ 1.32784253695879846650e-05, -+ 1.31129698220019766261e-05, -+ 1.29403815880963342583e-05, -+ 1.27607754617702922906e-05, -+ 1.25742700044388885011e-05, -+ 1.23809874685797173814e-05, -+ 1.21810537193292244224e-05, -+ 1.19745981541777892090e-05, -+ 1.17617536208142295677e-05, -+ 1.15426563331714449024e-05, -+ 1.13174457857225807409e-05, -+ 1.10862646660882621001e-05, -+ 1.08492587659991565309e-05, -+ 1.06065768906759967075e-05, -+ 1.03583707666798818434e-05, -+ 1.01047949482890619580e-05, -+ 9.84600672246289829138e-06, -+ 9.58216601244215827264e-06, -+ 9.31343528005553203603e-06, -+ 9.03997942678299933766e-06, -+ 8.76196569363900174996e-06, -+ 8.47956355993590845071e-06, -+ 8.19294464098436757177e-06, -+ 7.90228258480172436834e-06, -+ 7.60775296787702002085e-06, -+ 7.30953319006439522813e-06, -+ 7.00780236866348362574e-06, -+ 6.70274123175005229701e-06, -+ 6.39453201082003652993e-06, -+ 6.08335833281021253502e-06, -+ 5.76940511155902288967e-06, -+ 5.45285843877125582177e-06, -+ 5.13390547455034551393e-06, -+ 4.81273433756231556671e-06, -+ 4.48953399489534794848e-06, -+ 4.16449415167896653590e-06, -+ 3.83780514052692429906e-06, -+ 3.50965781086775528301e-06, -+ 3.18024341822695296120e-06, -+ 2.84975351352448496748e-06, -+ 2.51837983245139741199e-06, -+ 2.18631418498888039782e-06, -+ 1.85374834513309478132e-06, -+ 1.52087394088868180660e-06, -+ 1.18788234459368242750e-06, -+ 8.54964563638969000998e-07, -+ 5.22311131639455979077e-07, -+ 1.90112000130503982774e-07, -+-1.41443569165127144841e-07, -+-4.72167111427258322109e-07, -+-8.01871065130554529929e-07, -+-1.13036887767394417904e-06, -+-1.45747511019990077643e-06, -+-1.78300554152943349745e-06, -+-2.10677727116673305869e-06, -+-2.42860882131162050769e-06, -+-2.74832023782412414206e-06, -+-3.06573319008543263771e-06, -+-3.38067106969957008626e-06, -+-3.69295908798608184869e-06, -+-4.00242437219907550613e-06, -+-4.30889606043524369669e-06, -+-4.61220539516788939752e-06, -+-4.91218581536073784053e-06, -+-5.20867304711107137976e-06, -+-5.50150519277325040547e-06, -+-5.79052281851486924603e-06, -+-6.07556904025867903059e-06, -+-6.35648960796446912367e-06, -+-6.63313298820617108662e-06, -+-6.90535044500056127508e-06, -+-7.17299611884493175119e-06, -+-7.43592710392244173663e-06, -+-7.69400352343472750019e-06, -+-7.94708860302274787185e-06, -+-8.19504874223798014101e-06, -+-8.43775358402712548757e-06, -+-8.67507608219503231826e-06, -+-8.90689256681143526513e-06, -+-9.13308280752864666172e-06, -+-9.35353007477842320907e-06, -+-9.56812119881768913406e-06, -+-9.77674662659346799308e-06, -+-9.97930047640225587741e-06, -+-1.01756805903098395061e-05, -+-1.03657885843171664226e-05, -+-1.05495298962378540402e-05, -+-1.07268138312754163948e-05, -+-1.08975536052689632541e-05, -+-1.10616663855950794401e-05, -+-1.12190733297047288709e-05, -+-1.13696996212789541697e-05, -+-1.15134745039878948566e-05, -+-1.16503313128391599354e-05, -+-1.17802075031027646805e-05, -+-1.19030446768033701643e-05, -+-1.20187886067651972661e-05, -+-1.21273892582080803395e-05, -+-1.22288008078826377517e-05, -+-1.23229816607413100770e-05, -+-1.24098944641409426887e-05, -+-1.24895061195742445941e-05, -+-1.25617877919291833080e-05, -+-1.26267149162764970278e-05, -+-1.26842672021870910226e-05, -+-1.27344286355826809563e-05, -+-1.27771874781232745640e-05, -+-1.28125362641396452218e-05, -+-1.28404717951158474197e-05, -+-1.28609951317310474550e-05, -+-1.28741115834723465414e-05, -+-1.28798306958283372134e-05, -+-1.28781662350772487912e-05, -+-1.28691361706835918807e-05, -+-1.28527626553190634970e-05, -+-1.28290720025245128650e-05, -+-1.27980946620313942489e-05, -+-1.27598651927620886218e-05, -+-1.27144222335301226119e-05, -+-1.26618084714623414664e-05, -+-1.26020706081659076143e-05, -+-1.25352593236666657602e-05, -+-1.24614292381415428035e-05, -+-1.23806388714751623682e-05, -+-1.22929506006672047076e-05, -+-1.21984306151204884824e-05, -+-1.20971488698402506546e-05, -+-1.19891790365764339750e-05, -+-1.18745984529418113659e-05, -+-1.17534880695398776456e-05, -+-1.16259323951374368445e-05, -+-1.14920194399183685165e-05, -+-1.13518406568538079223e-05, -+-1.12054908812311493295e-05, -+-1.10530682683752438347e-05, -+-1.08946742296059593923e-05, -+-1.07304133664714714479e-05, -+-1.05603934032992665185e-05, -+-1.03847251181075779763e-05, -+-1.02035222719208779302e-05, -+-1.00169015365332405226e-05, -+-9.82498242076738657132e-06, -+-9.62788719526892533595e-06, -+-9.42574081589087935042e-06, -+-9.21867084571004267567e-06, -+-9.00680737572287916197e-06, -+-8.79028294427637022824e-06, -+-8.56923245527351259271e-06, -+-8.34379309521075756921e-06, -+-8.11410424909460554577e-06, -+-7.88030741528924488369e-06, -+-7.64254611934633504094e-06, -+-7.40096582686917382960e-06, -+-7.15571385546351836380e-06, -+-6.90693928582781290984e-06, -+-6.65479287203611895166e-06, -+-6.39942695106712918212e-06, -+-6.14099535163319854876e-06, -+-5.87965330236342373891e-06, -+-5.61555733939511250274e-06, -+-5.34886521342830269742e-06, -+-5.07973579629795705422e-06, -+-4.80832898711880610677e-06, -+-4.53480561805786592893e-06, -+-4.25932735978965902460e-06, -+-3.98205662668941065763e-06, -+-3.70315648181929639785e-06, -+-3.42279054176300851270e-06, -+-3.14112288136435437299e-06, -+-2.85831793842106375632e-06, -+-2.57454041839861196264e-06, -+-2.28995519920570692832e-06, -+-2.00472723609599568439e-06, -+-1.71902146674648263972e-06, -+-1.43300271656756140053e-06, -+-1.14683560429862268911e-06, -+-8.60684447942252036623e-07, -+-5.74713171094427766504e-07, -+-2.89085209713597664617e-07, -+-3.96341939478251296110e-09, -+ 2.80490016808534609067e-07, -+ 5.64113679962953421250e-07, -+ 8.46747006173344896037e-07, -+ 1.12823037680340410583e-06, -+ 1.40840520793811109215e-06, -+ 1.68711403904242672689e-06, -+ 1.96420062076637285675e-06, -+ 2.23951000184795544334e-06, -+ 2.51288861506598641053e-06, -+ 2.78418436219555765417e-06, -+ 3.05324669791958273155e-06, -+ 3.31992671265051673821e-06, -+ 3.58407721421717316118e-06, -+ 3.84555280837218626654e-06, -+ 4.10420997807660228022e-06, -+ 4.35990716151877168199e-06, -+ 4.61250482882560770565e-06, -+ 4.86186555742507531383e-06, -+ 5.10785410601973079235e-06, -+ 5.35033748713194356707e-06, -+ 5.58918503818238221671e-06, -+ 5.82426849106429956731e-06, -+ 6.05546204017706400874e-06, -+ 6.28264240888338113098e-06, -+ 6.50568891435568739365e-06, -+ 6.72448353077756515444e-06, -+ 6.93891095087089373919e-06, -+ 7.14885864570919282062e-06, -+ 7.35421692279753319929e-06, -+ 7.55487898238148465092e-06, -+ 7.75074097196019129528e-06, -+ 7.94170203897623056888e-06, -+ 8.12766438165342534124e-06, -+ 8.30853329796486298722e-06, -+ 8.48421723269773222391e-06, -+ 8.65462782259947107971e-06, -+ 8.81967993958106861606e-06, -+ 8.97929173195711876623e-06, -+ 9.13338466370594821242e-06, -+ 9.28188355172597093559e-06, -+ 9.42471660107943996656e-06, -+ 9.56181543820204782021e-06, -+ 9.69311514206661032516e-06, -+ 9.81855427328706617540e-06, -+ 9.93807490115107773816e-06, -+ 1.00516226285705943843e-05, -+ 1.01591466149406832020e-05, -+ 1.02605995968987750983e-05, -+ 1.03559379069769316912e-05, -+ 1.04451214901417424743e-05, -+ 1.05281139182170699055e-05, -+ 1.06048824021864677416e-05, -+ 1.06753978023731855288e-05, -+ 1.07396346364968783339e-05, -+ 1.07975710856074994448e-05, -+ 1.08491889978979006982e-05, -+ 1.08944738903980051003e-05, -+ 1.09334149485546700144e-05, -+ 1.09660050237023010909e-05, -+ 1.09922406284309627094e-05, -+ 1.10121219298593066863e-05, -+ 1.10256527408215773174e-05, -+ 1.10328405089781558080e-05, -+ 1.10336963038616736523e-05, -+ 1.10282348018699333952e-05, -+ 1.10164742692203395746e-05, -+ 1.09984365428796701980e-05, -+ 1.09741470094854162102e-05, -+ 1.09436345822753026573e-05, -+ 1.09069316760433128688e-05, -+ 1.08640741801411637853e-05, -+ 1.08151014295454121441e-05, -+ 1.07600561740116316219e-05, -+ 1.06989845453377939037e-05, -+ 1.06319360227604537122e-05, -+ 1.05589633965072819227e-05, -+ 1.04801227295333686110e-05, -+ 1.03954733174649689091e-05, -+ 1.03050776467800735478e-05, -+ 1.02090013512532056038e-05, -+ 1.01073131666939828753e-05, -+ 1.00000848840093901980e-05, -+ 9.88739130062094606394e-06, -+ 9.76931017026862892453e-06, -+ 9.64592215123430269373e-06, -+ 9.51731075301832287069e-06, -+ 9.38356228150362642153e-06, -+ 9.24476578264260636546e-06, -+ 9.10101298470273608427e-06, -+ 8.95239823910756736568e-06, -+ 8.79901845991063759865e-06, -+ 8.64097306194044156673e-06, -+ 8.47836389765517216299e-06, -+ 8.31129519274676613631e-06, -+ 8.13987348053439576051e-06, -+ 7.96420753518800302127e-06, -+ 7.78440830382320983472e-06, -+ 7.60058883750940706770e-06, -+ 7.41286422123340111201e-06, -+ 7.22135150286187937354e-06, -+ 7.02616962114339291517e-06, -+ 6.82743933279976089379e-06, -+ 6.62528313874512338812e-06, -+ 6.41982520947684842004e-06, -+ 6.21119130968985121773e-06, -+ 5.99950872215320453294e-06, -+ 5.78490617089735561883e-06, -+ 5.56751374375751685266e-06, -+ 5.34746281431924760940e-06, -+ 5.12488596331278031701e-06, -+ 4.89991689950258687289e-06, -+ 4.67269038011961418454e-06, -+ 4.44334213087987709952e-06, -+ 4.21200876564441589159e-06, -+ 3.97882770575729567648e-06, -+ 3.74393709911667144121e-06, -+ 3.50747573902317319374e-06, -+ 3.26958298285330172902e-06, -+ 3.03039867060520659957e-06, -+ 2.79006304336402052000e-06, -+ 2.54871666173396763366e-06, -+ 2.30650032428370582201e-06, -+ 2.06355498605534895103e-06, -+ 1.82002167717590069487e-06, -+ 1.57604142162576490206e-06, -+ 1.33175515621080687286e-06, -+ 1.08730364977607694810e-06, -+ 8.42827422715224723608e-07, -+ 5.98466666817798730862e-07, -+ 3.54361165500383015065e-07, -+ 1.10650214466601145526e-07, -+-1.32527457159341769654e-07, -+-3.75033765181279387019e-07, -+-6.16731348117982223764e-07, -+-8.57483644384870604974e-07, -+-1.09715496882697242401e-06, -+-1.33561058856459451812e-06, -+-1.57271679809768592289e-06, -+-1.80834099364739390638e-06, -+-2.04235174667385346287e-06, -+-2.27461887654183985059e-06, -+-2.50501352229047160599e-06, -+-2.73340821346838846000e-06, -+-2.95967693999581947631e-06, -+-3.18369522101568454449e-06, -+-3.40534017269651038867e-06, -+-3.62449057495060442016e-06, -+-3.84102693703176620771e-06, -+-4.05483156197683158547e-06, -+-4.26578860985994465493e-06, -+-4.47378415981817885059e-06, -+-4.67870627082610431870e-06, -+-4.88044504117963632650e-06, -+-5.07889266666103897304e-06, -+-5.27394349735436316360e-06, -+-5.46549409308178958515e-06, -+-5.65344327743282125745e-06, -+-5.83769219035584263823e-06, -+-6.01814433929215356056e-06, -+-6.19470564881734900520e-06, -+-6.36728450877158616566e-06, -+-6.53579182085452806356e-06, -+-6.70014104365581900433e-06, -+-6.86024823610766216613e-06, -+-7.01603209933177423939e-06, -+-7.16741401686316151218e-06, -+-7.31431809323110943569e-06, -+-7.45667119087909145226e-06, -+-7.59440296540647431485e-06, -+-7.72744589911581192265e-06, -+-7.85573533285050310242e-06, -+-7.97920949610866873263e-06, -+-8.09780953542020220872e-06, -+-8.21147954097478835185e-06, -+-8.32016657148992507269e-06, -+-8.42382067730890197923e-06, -+-8.52239492171977940256e-06, -+-8.61584540048746502295e-06, -+-8.70413125959197291938e-06, -+-8.78721471116717128705e-06, -+-8.86506104763514668932e-06, -+-8.93763865403249516855e-06, -+-9.00491901852594998912e-06, -+-9.06687674111571462719e-06, -+-9.12348954052592163661e-06, -+-9.17473825928260702616e-06, -+-9.22060686698159047512e-06, -+-9.26108246174664932824e-06, -+-9.29615526988461694400e-06, -+-9.32581864373973304274e-06, -+-9.35006905775386307602e-06, -+-9.36890610273917822759e-06, -+-9.38233247837104300938e-06, -+-9.39035398390946727946e-06, -+-9.39297950715976480397e-06, -+-9.39022101168187463889e-06, -+-9.38209352226113891724e-06, -+-9.36861510865258015606e-06, -+-9.34980686761262702199e-06, -+-9.32569290323271860845e-06, -+-9.29630030559048952147e-06, -+-9.26165912773481235900e-06, -+-9.22180236102228707016e-06, -+-9.17676590882337654416e-06, -+-9.12658855861738727770e-06, -+-9.07131195249644772880e-06, -+-9.01098055609939421230e-06, -+-8.94564162599733138977e-06, -+-8.87534517555361527068e-06, -+-8.80014393928162666969e-06, -+-8.72009333572471611652e-06, -+-8.63525142888329921994e-06, -+-8.54567888821502508222e-06, -+-8.45143894723457394103e-06, -+-8.35259736074052112995e-06, -+-8.24922236069722452712e-06, -+-8.14138461080064133836e-06, -+-8.02915715975743407074e-06, -+-7.91261539330765898304e-06, -+-7.79183698502164539547e-06, -+-7.66690184590263985908e-06, -+-7.53789207282747358732e-06, -+-7.40489189585616646447e-06, -+-7.26798762444797763775e-06, -+-7.12726759261192169612e-06, -+-6.98282210303029636403e-06, -+-6.83474337018834747465e-06, -+-6.68312546254524426573e-06, -+-6.52806424378415029071e-06, -+-6.36965731317252602944e-06, -+-6.20800394507595081702e-06, -+-6.04320502765754885186e-06, -+-5.87536300080224453186e-06, -+-5.70458179330339185380e-06, -+-5.53096675935019674964e-06, -+-5.35462461435186519118e-06, -+-5.17566337014321141424e-06, -+-4.99419226960263364762e-06, -+-4.81032172072758387396e-06, -+-4.62416323020455543279e-06, -+-4.43582933651357265599e-06, -+-4.24543354260686772332e-06, -+-4.05309024820171368161e-06, -+-3.85891468172737918331e-06, -+-3.66302283196632931856e-06, -+-3.46553137942988627687e-06, -+-3.26655762750855510455e-06, -+-3.06621943343732231445e-06, -+-2.86463513911618343607e-06, -+-2.66192350182618693409e-06, -+-2.45820362488117562057e-06, -+-2.25359488825541727446e-06, -+-2.04821687922720013799e-06, -+-1.84218932307831247064e-06, -+-1.63563201388926604866e-06, -+-1.42866474546994879804e-06, -+-1.22140724246515182631e-06, -+-1.01397909167432569799e-06, -+-8.06499673625078029042e-07, -+-5.99088094436327444290e-07, -+-3.91863118017023242330e-07, -+-1.84943098628889751524e-07, -+ 2.15540861419684426667e-08, -+ 2.27511101966967466315e-07, -+ 4.32811223880043209387e-07, -+ 6.37338401859019189379e-07, -+ 8.40977325854192905002e-07, -+ 1.04361349022508806704e-06, -+ 1.24513325755019998089e-06, -+ 1.44542392177450216890e-06, -+ 1.64437377065950114052e-06, -+ 1.84187214750444789869e-06, -+ 2.03780951209777257423e-06, -+ 2.23207750087511452161e-06, -+ 2.42456898624406490649e-06, -+ 2.61517813504639618351e-06, -+ 2.80380046612576570131e-06, -+ 2.99033290696995661509e-06, -+ 3.17467384939732300976e-06, -+ 3.35672320425774437633e-06, -+ 3.53638245511906924553e-06, -+ 3.71355471091059317744e-06, -+ 3.88814475749635763264e-06, -+ 4.06005910814819412596e-06, -+ 4.22920605290116388692e-06, -+ 4.39549570675089384069e-06, -+ 4.55884005668278723919e-06, -+ 4.71915300750006533998e-06, -+ 4.87635042643024103849e-06, -+ 5.03035018648692755928e-06, -+ 5.18107220856522701196e-06, -+ 5.32843850224952383525e-06, -+ 5.47237320531358473132e-06, -+ 5.61280262189333594894e-06, -+ 5.74965525931381193962e-06, -+ 5.88286186355211838841e-06, -+ 6.01235545332134090329e-06, -+ 6.13807135275468517243e-06, -+ 6.25994722267931996977e-06, -+ 6.37792309046513804878e-06, -+ 6.49194137843068450202e-06, -+ 6.60194693079779326846e-06, -+ 6.70788703918137587323e-06, -+ 6.80971146660357458814e-06, -+ 6.90737247002230281208e-06, -+ 7.00082482136491290685e-06, -+ 7.09002582705877526905e-06, -+ 7.17493534605098864026e-06, -+ 7.25551580631220637360e-06, -+ 7.33173221981546288786e-06, -+ 7.40355219598984530240e-06, -+ 7.47094595364170035832e-06, -+ 7.53388633134188754210e-06, -+ 7.59234879627670417821e-06, -+ 7.64631145156141268828e-06, -+ 7.69575504201604814413e-06, -+ 7.74066295840411851953e-06, -+ 7.78102124013589340075e-06, -+ 7.81681857643788967132e-06, -+ 7.84804630599365161535e-06, -+ 7.87469841505748138885e-06, -+ 7.89677153404848565748e-06, -+ 7.91426493262873480251e-06, -+ 7.92718051327426929855e-06, -+ 7.93552280334505359466e-06, -+ 7.93929894566308982874e-06, -+ 7.93851868760764620798e-06, -+ 7.93319436873791183408e-06, -+ 7.92334090695392168925e-06, -+ 7.90897578320756958670e-06, -+ 7.89011902477623500857e-06, -+ 7.86679318711244252764e-06, -+ 7.83902333428366876954e-06, -+ 7.80683701801724535304e-06, -+ 7.77026425536612447970e-06, -+ 7.72933750501182780370e-06, -+ 7.68409164222195630977e-06, -+ 7.63456393248006921998e-06, -+ 7.58079400380666152174e-06, -+ 7.52282381779056517397e-06, -+ 7.46069763935092151688e-06, -+ 7.39446200525034590259e-06, -+ 7.32416569138081104189e-06, -+ 7.24985967884426853560e-06, -+ 7.17159711885090219710e-06, -+ 7.08943329645732147265e-06, -+ 7.00342559317115033967e-06, -+ 6.91363344844324002262e-06, -+ 6.82011832007511287137e-06, -+ 6.72294364356627759040e-06, -+ 6.62217479042785679954e-06, -+ 6.51787902548926013278e-06, -+ 6.41012546322492830867e-06, -+ 6.29898502313035979733e-06, -+ 6.18453038417209923617e-06, -+ 6.06683593834504205765e-06, -+ 5.94597774336311937993e-06, -+ 5.82203347451249516448e-06, -+ 5.69508237570125013232e-06, -+ 5.56520520973042217313e-06, -+ 5.43248420782122392469e-06, -+ 5.29700301842786852943e-06, -+ 5.15884665536775968036e-06, -+ 5.01810144530070211867e-06, -+ 4.87485497458916059279e-06, -+ 4.72919603557198831207e-06, -+ 4.58121457228396545999e-06, -+ 4.43100162565413800605e-06, -+ 4.27864927821586065842e-06, -+ 4.12425059836174341351e-06, -+ 3.96789958417691884638e-06, -+ 3.80969110688415655311e-06, -+ 3.64972085393445999985e-06, -+ 3.48808527177698559195e-06, -+ 3.32488150834214283460e-06, -+ 3.16020735527182339492e-06, -+ 2.99416118993082249565e-06, -+ 2.82684191723347329501e-06, -+ 2.65834891131958394095e-06, -+ 2.48878195711375767025e-06, -+ 2.31824119180212634826e-06, -+ 2.14682704626095390252e-06, -+ 1.97464018646858031233e-06, -+ 1.80178145494066620423e-06, -+ 1.62835181221444846777e-06, -+ 1.45445227842166370380e-06, -+ 1.28018387498127474226e-06, -+ 1.10564756644572971662e-06, -+ 9.30944202533528893967e-07, -+ 7.56174460383558706575e-07, -+ 5.81438787057772137935e-07, -+ 4.06837342332995493781e-07, -+ 2.32469941807973572217e-07, -+ 5.84360003605464838908e-08, -+-1.15165524016196481795e-07, -+-2.88236185961157478515e-07, -+-4.60678108053030918551e-07, -+-6.32394035641693353382e-07, -+-8.03287391175248576365e-07, -+-9.73262327992278866677e-07, -+-1.14222378354964966348e-06, -+-1.31007753205661820651e-06, -+-1.47673023648642007660e-06, -+-1.64208949993695062100e-06, -+-1.80606391631259277593e-06, -+-1.96856312029973079598e-06, -+-2.12949783660893906853e-06, -+-2.28877992845738131554e-06, -+-2.44632244526540991875e-06, -+-2.60203966954189995785e-06, -+-2.75584716293343213363e-06, -+-2.90766181141288047594e-06, -+-3.05740186958367351418e-06, -+-3.20498700407640839933e-06, -+-3.35033833601523650274e-06, -+-3.49337848253191377853e-06, -+-3.63403159730610840275e-06, -+-3.77222341011111343188e-06, -+-3.90788126534447433042e-06, -+-4.04093415952591392912e-06, -+-4.17131277773873497690e-06, -+-4.29894952900307645335e-06, -+-4.42377858055843327302e-06, -+-4.54573589104088312044e-06, -+-4.66475924253666648223e-06, -+-4.78078827150107880212e-06, -+-4.89376449852186315914e-06, -+-5.00363135691748540988e-06, -+-5.11033422015512990528e-06, -+-5.21382042807596778544e-06, -+-5.31403931191554123584e-06, -+-5.41094221810950165016e-06, -+-5.50448253087047069913e-06, -+-5.59461569353127499173e-06, -+-5.68129922864175650784e-06, -+-5.76449275681243674909e-06, -+-5.84415801429719277657e-06, -+-5.92025886930820698860e-06, -+-5.99276133705720719759e-06, -+-6.06163359351762427620e-06, -+-6.12684598790327211872e-06, -+-6.18837105385967135374e-06, -+-6.24618351936512419082e-06, -+-6.30026031533919750782e-06, -+-6.35058058295712848316e-06, -+-6.39712567966953613306e-06, -+-6.43987918392721429004e-06, -+-6.47882689861198942782e-06, -+-6.51395685317499943250e-06, -+-6.54525930448471249620e-06, -+-6.57272673638766514792e-06, -+-6.59635385798559469776e-06, -+-6.61613760063350534395e-06, -+-6.63207711366379757420e-06, -+-6.64417375884241211495e-06, -+-6.65243110356349872368e-06, -+-6.65685491279031274194e-06, -+-6.65745313974966963219e-06, -+-6.65423591538958656902e-06, -+-6.64721553660889651050e-06, -+-6.63640645326926765439e-06, -+-6.62182525400028480084e-06, -+-6.60349065080916732668e-06, -+-6.58142346250719060277e-06, -+-6.55564659696565526196e-06, -+-6.52618503221475609801e-06, -+-6.49306579639951552747e-06, -+-6.45631794660739462695e-06, -+-6.41597254658263945040e-06, -+-6.37206264334415081952e-06, -+-6.32462324272206488792e-06, -+-6.27369128383118030161e-06, -+-6.21930561249836743221e-06, -+-6.16150695366234792122e-06, -+-6.10033788276449535378e-06, -+-6.03584279615001515287e-06, -+-5.96806788049923278545e-06, -+-5.89706108130940631553e-06, -+-5.82287207044756658384e-06, -+-5.74555221279694319542e-06, -+-5.66515453201526036843e-06, -+-5.58173367543274885226e-06, -+-5.49534587810695348729e-06, -+-5.40604892606070708310e-06, -+-5.31390211872570004752e-06, -+-5.21896623061564390400e-06, -+-5.12130347225329365013e-06, -+-5.02097745037598523939e-06, -+-4.91805312744465109411e-06, -+-4.81259678048159588907e-06, -+-4.70467595926274513780e-06, -+-4.59435944389046620792e-06, -+-4.48171720177175865495e-06, -+-4.36682034403174463086e-06, -+-4.24974108138584086476e-06, -+-4.13055267949739200956e-06, -+-4.00932941385171509125e-06, -+-3.88614652417032873467e-06, -+-3.76108016839454787432e-06, -+-3.63420737626596489757e-06, -+-3.50560600253174686132e-06, -+-3.37535467980288975763e-06, -+-3.24353277109359282678e-06, -+-3.11022032207008786392e-06, -+-2.97549801303766165317e-06, -+-2.83944711069247344591e-06, -+-2.70214941967136185736e-06, -+-2.56368723392205452038e-06, -+-2.42414328792700028154e-06, -+-2.28360070780758763959e-06, -+-2.14214296233768618929e-06, -+-1.99985381389505311643e-06, -+-1.85681726937918172971e-06, -+-1.71311753112369806511e-06, -+-1.56883894783374962087e-06, -+-1.42406596557164193617e-06, -+-1.27888307882598605392e-06, -+-1.13337478168536349648e-06, -+-9.87625519151570836163e-07, -+-8.41719638613064665786e-07, -+-6.95741341511352204364e-07, -+-5.49774635225687810111e-07, -+-4.03903285203652358387e-07, -+-2.58210767364619000791e-07, -+-1.12780220802875344963e-07, -+ 3.23055991830684097878e-08, -+ 1.76964367708724778855e-07, -+ 3.21114236543438189078e-07, -+ 4.64673879946063572873e-07, -+ 6.07562540071123210426e-07, -+ 7.49700071920371749061e-07, -+ 8.91006987815025860095e-07, -+ 1.03140450136427425456e-06, -+ 1.17081457090602433941e-06, -+ 1.30915994239623084851e-06, -+ 1.44636419172353368897e-06, -+ 1.58235176642631552541e-06, -+ 1.71704802678972351765e-06, -+ 1.85037928630060069746e-06, -+ 1.98227285143870244472e-06, -+ 2.11265706078306988520e-06, -+ 2.24146132341246485419e-06, -+ 2.36861615658157347906e-06, -+ 2.49405322264845444755e-06, -+ 2.61770536524023275885e-06, -+ 2.73950664463357572141e-06, -+ 2.85939237233350266468e-06, -+ 2.97729914483249884479e-06, -+ 3.09316487653266211920e-06, -+ 3.20692883181446816197e-06, -+ 3.31853165623432036477e-06, -+ 3.42791540683944990220e-06, -+ 3.53502358157950725138e-06, -+ 3.63980114780429875857e-06, -+ 3.74219456983363037592e-06, -+ 3.84215183558227767505e-06, -+ 3.93962248223251686305e-06, -+ 4.03455762093816806731e-06, -+ 4.12690996055009787897e-06, -+ 4.21663383035196559137e-06, -+ 4.30368520179581453395e-06, -+ 4.38802170922777651609e-06, -+ 4.46960266959470585012e-06, -+ 4.54838910112321163730e-06, -+ 4.62434374096319227585e-06, -+ 4.69743106178853688561e-06, -+ 4.76761728734836138144e-06, -+ 4.83487040696272629773e-06, -+ 4.89916018895741111830e-06, -+ 4.96045819303296106926e-06, -+ 5.01873778156387963061e-06, -+ 5.07397412982442447456e-06, -+ 5.12614423513811590729e-06, -+ 5.17522692494871317675e-06, -+ 5.22120286381103742548e-06, -+ 5.26405455930064433061e-06, -+ 5.30376636684197204255e-06, -+ 5.34032449345513637005e-06, -+ 5.37371700042290210606e-06, -+ 5.40393380487774409700e-06, -+ 5.43096668031327048978e-06, -+ 5.45480925602115842708e-06, -+ 5.47545701545760188074e-06, -+ 5.49290729354319507956e-06, -+ 5.50715927290080433390e-06, -+ 5.51821397903640711657e-06, -+ 5.52607427446940615412e-06, -+ 5.53074485181774806004e-06, -+ 5.53223222584567817618e-06, -+ 5.53054472448127380454e-06, -+ 5.52569247881201016526e-06, -+ 5.51768741206704879188e-06, -+ 5.50654322759543274221e-06, -+ 5.49227539585013617960e-06, -+ 5.47490114038823605808e-06, -+ 5.45443942289814534188e-06, -+ 5.43091092726536726806e-06, -+ 5.40433804268870449940e-06, -+ 5.37474484585942960917e-06, -+ 5.34215708221641970028e-06, -+ 5.30660214629070434828e-06, -+ 5.26810906115345203946e-06, -+ 5.22670845698185819179e-06, -+ 5.18243254875779933987e-06, -+ 5.13531511311474995156e-06, -+ 5.08539146434873193589e-06, -+ 5.03269842960957088606e-06, -+ 4.97727432328926165021e-06, -+ 4.91915892062447536855e-06, -+ 4.85839343053077035771e-06, -+ 4.79502046768650205761e-06, -+ 4.72908402388465426040e-06, -+ 4.66062943867137881228e-06, -+ 4.58970336929019699759e-06, -+ 4.51635375995152054556e-06, -+ 4.44062981044616933641e-06, -+ 4.36258194412544737627e-06, -+ 4.28226177526485068410e-06, -+ 4.19972207583456497138e-06, -+ 4.11501674169647542961e-06, -+ 4.02820075825028238263e-06, -+ 3.93933016554731602391e-06, -+ 3.84846202289762216335e-06, -+ 3.75565437298938188386e-06, -+ 3.66096620554404999308e-06, -+ 3.56445742052937107578e-06, -+ 3.46618879095310788465e-06, -+ 3.36622192525887642755e-06, -+ 3.26461922935039320666e-06, -+ 3.16144386826273460570e-06, -+ 3.05675972750716587302e-06, -+ 2.95063137411155366322e-06, -+ 2.84312401738004221383e-06, -+ 2.73430346939548900412e-06, -+ 2.62423610528835733665e-06, -+ 2.51298882329570483720e-06, -+ 2.40062900463402164141e-06, -+ 2.28722447320975292833e-06, -+ 2.17284345519123839340e-06, -+ 2.05755453846596430753e-06, -+ 1.94142663200690945903e-06, -+ 1.82452892517181498007e-06, -+ 1.70693084695912356741e-06, -+ 1.58870202524435859482e-06, -+ 1.46991224602059460634e-06, -+ 1.35063141266662197534e-06, -+ 1.23092950526634752769e-06, -+ 1.11087654000282617921e-06, -+ 9.90542528650260827215e-07, -+ 8.69997438187136635693e-07, -+ 7.49311150553558232788e-07, -+ 6.28553422575956171735e-07, -+ 5.07793846080199777306e-07, -+ 3.87101808219950752071e-07, -+ 2.66546452036637359768e-07, -+ 1.46196637279211919523e-07, -+ 2.61209014996513097622e-08, -+-9.36125785480710641559e-08, -+-2.12936025188332329408e-07, -+-3.31782097760571907408e-07, -+-4.50083930191668236211e-07, -+-5.67775168183275709294e-07, -+-6.84790005993688176635e-07, -+-8.01063222793833814618e-07, -+-9.16530218579230311038e-07, -+-1.03112704961422672079e-06, -+-1.14479046339492176093e-06, -+-1.25745793310772014899e-06, -+-1.36906769156673085052e-06, -+-1.47955876461155409369e-06, -+-1.58887100394770566988e-06, -+-1.69694511941227368702e-06, -+-1.80372271064780189541e-06, -+-1.90914629816775581196e-06, -+-2.01315935379763895325e-06, -+-2.11570633047440601331e-06, -+-2.21673269139235624129e-06, -+-2.31618493847693730396e-06, -+-2.41401064017204397923e-06, -+-2.51015845853012064279e-06, -+-2.60457817558802397410e-06, -+-2.69722071901685094830e-06, -+-2.78803818703287373008e-06, -+-2.87698387255719700099e-06, -+-2.96401228661247619401e-06, -+-3.04907918094525491427e-06, -+-3.13214156986324088414e-06, -+-3.21315775127703456810e-06, -+-3.29208732693637732224e-06, -+-3.36889122185290401895e-06, -+-3.44353170289642487268e-06, -+-3.51597239656325077098e-06, -+-3.58617830590191733468e-06, -+-3.65411582659302460743e-06, -+-3.71975276217506551713e-06, -+-3.78305833841012117849e-06, -+-3.84400321678365093078e-06, -+-3.90255950713312254181e-06, -+-3.95870077940074512301e-06, -+-4.01240207450610770714e-06, -+-4.06363991433488812364e-06, -+-4.11239231084125285599e-06, -+-4.15863877425935865654e-06, -+-4.20236032042448446743e-06, -+-4.24353947720017342875e-06, -+-4.28216029001119185047e-06, -+-4.31820832648155806497e-06, -+-4.35167068017766995946e-06, -+-4.38253597345699451516e-06, -+-4.41079435942349164690e-06, -+-4.43643752299069560910e-06, -+-4.45945868105587513408e-06, -+-4.47985258178600159821e-06, -+-4.49761550302029909350e-06, -+-4.51274524979143300062e-06, -+-4.52524115097084023650e-06, -+-4.53510405504175193850e-06, -+-4.54233632500539397060e-06, -+-4.54694183242584894293e-06, -+-4.54892595061959283142e-06, -+-4.54829554699628510261e-06, -+-4.54505897455774022598e-06, -+-4.53922606256257512138e-06, -+-4.53080810636444806448e-06, -+-4.51981785643228738179e-06, -+-4.50626950656128519675e-06, -+-4.49017868128402610519e-06, -+-4.47156242249136545128e-06, -+-4.45043917527324955132e-06, -+-4.42682877299008102390e-06, -+-4.40075242158549665903e-06, -+-4.37223268315208425070e-06, -+-4.34129345876175116439e-06, -+-4.30795997057291989114e-06, -+-4.27225874322715952063e-06, -+-4.23421758454818478526e-06, -+-4.19386556555651685739e-06, -+-4.15123299981356679695e-06, -+-4.10635142210863573125e-06, -+-4.05925356650451797034e-06, -+-4.00997334375461245165e-06, -+-3.95854581810788347368e-06, -+-3.90500718351647261954e-06, -+-3.84939473926163028560e-06, -+-3.79174686501394100978e-06, -+-3.73210299534384178129e-06, -+-3.67050359369971365087e-06, -+-3.60699012586834896589e-06, -+-3.54160503293725947090e-06, -+-3.47439170377438781006e-06, -+-3.40539444704242567051e-06, -+-3.33465846276757226665e-06, -+-3.26222981347759901722e-06, -+-3.18815539492950643052e-06, -+-3.11248290644416109035e-06, -+-3.03526082086643820009e-06, -+-2.95653835416947222251e-06, -+-2.87636543472176765438e-06, -+-2.79479267223601303066e-06, -+-2.71187132641859964837e-06, -+-2.62765327533899515464e-06, -+-2.54219098353815390706e-06, -+-2.45553746989530186833e-06, -+-2.36774627527249690158e-06, -+-2.27887142995641191922e-06, -+-2.18896742091688744107e-06, -+-2.09808915890182256402e-06, -+-2.00629194538800892082e-06, -+-1.91363143940754862785e-06, -+-1.82016362426948875164e-06, -+-1.72594477419635162234e-06, -+-1.63103142089514905451e-06, -+-1.53548032008255493308e-06, -+-1.43934841798375985031e-06, -+-1.34269281782482158857e-06, -+-1.24557074633660619018e-06, -+-1.14803952029313359972e-06, -+-1.05015651309915032019e-06, -+-9.51979121449571438300e-07, -+-8.53564732078559276071e-07, -+-7.54970688617303580583e-07, -+-6.56254258580785667422e-07, -+-5.57472600498841932364e-07, -+-4.58682731214803567250e-07, -+-3.59941493366721268602e-07, -+-2.61305523070885236846e-07, -+-1.62831217825798099669e-07, -+-6.45747046531622918148e-08, -+ 3.34081915028460607542e-08, -+ 1.31061979105115269233e-07, -+ 2.28331531061093047517e-07, -+ 3.25162115452506418290e-07, -+ 4.21499425940175324931e-07, -+ 5.17289611827256223732e-07, -+ 6.12479307764515172907e-07, -+ 7.07015663081470306902e-07, -+ 8.00846370727535963142e-07, -+ 8.93919695807548723643e-07, -+ 9.86184503696360592316e-07, -+ 1.07759028771747680805e-06, -+ 1.16808719637099324993e-06, -+ 1.25762606009643313325e-06, -+ 1.34615841755636422783e-06, -+ 1.43363654142701431353e-06, -+ 1.52001346368244521319e-06, -+ 1.60524300035914707475e-06, -+ 1.68927977578831839769e-06, -+ 1.77207924628335479643e-06, -+ 1.85359772327053896192e-06, -+ 1.93379239585117203927e-06, -+ 2.01262135278386203690e-06, -+ 2.09004360387575857427e-06, -+ 2.16601910077334100819e-06, -+ 2.24050875713967010219e-06, -+ 2.31347446821209968128e-06, -+ 2.38487912972836386475e-06, -+ 2.45468665621208123303e-06, -+ 2.52286199861151334042e-06, -+ 2.58937116127982583862e-06, -+ 2.65418121829169547439e-06, -+ 2.71726032908779813765e-06, -+ 2.77857775344037205028e-06, -+ 2.83810386573328862561e-06, -+ 2.89581016855032907358e-06, -+ 2.95166930556685687487e-06, -+ 3.00565507373729543829e-06, -+ 3.05774243477661226693e-06, -+ 3.10790752592901346437e-06, -+ 3.15612767002082679062e-06, -+ 3.20238138479374552623e-06, -+ 3.24664839151536307337e-06, -+ 3.28890962286420223838e-06, -+ 3.32914723008697677049e-06, -+ 3.36734458942622126102e-06, -+ 3.40348630781685071737e-06, -+ 3.43755822785064014868e-06, -+ 3.46954743200808672055e-06, -+ 3.49944224615744907365e-06, -+ 3.52723224232133607687e-06, -+ 3.55290824071145572597e-06, -+ 3.57646231103275916171e-06, -+ 3.59788777305844983311e-06, -+ 3.61717919647792329573e-06, -+ 3.63433240001992844556e-06, -+ 3.64934444985388431064e-06, -+ 3.66221365727246736405e-06, -+ 3.67293957565916496310e-06, -+ 3.68152299674478401627e-06, -+ 3.68796594615754264255e-06, -+ 3.69227167827109476069e-06, -+ 3.69444467035641090999e-06, -+ 3.69449061604251067923e-06, -+ 3.69241641809255407447e-06, -+ 3.68823018050121809172e-06, -+ 3.68194119992049474706e-06, -+ 3.67355995642082701168e-06, -+ 3.66309810359520425440e-06, -+ 3.65056845801397982505e-06, -+ 3.63598498803867909083e-06, -+ 3.61936280200335549955e-06, -+ 3.60071813577239656246e-06, -+ 3.58006833968386969076e-06, -+ 3.55743186488838466342e-06, -+ 3.53282824909282608752e-06, -+ 3.50627810171953317514e-06, -+ 3.47780308849131654283e-06, -+ 3.44742591545312398587e-06, -+ 3.41517031244148100487e-06, -+ 3.38106101601311265410e-06, -+ 3.34512375184437054455e-06, -+ 3.30738521661340731931e-06, -+ 3.26787305937770838069e-06, -+ 3.22661586245842979003e-06, -+ 3.18364312184520498148e-06, -+ 3.13898522713461071050e-06, -+ 3.09267344101413714559e-06, -+ 3.04473987830630518563e-06, -+ 2.99521748458606001315e-06, -+ 2.94414001438530427212e-06, -+ 2.89154200899865406331e-06, -+ 2.83745877390457421898e-06, -+ 2.78192635581631105178e-06, -+ 2.72498151937718603862e-06, -+ 2.66666172351495323772e-06, -+ 2.60700509747023960325e-06, -+ 2.54605041651313995614e-06, -+ 2.48383707736592921508e-06, -+ 2.42040507334248784649e-06, -+ 2.35579496922448726218e-06, -+ 2.29004787588705505843e-06, -+ 2.22320542469039954603e-06, -+ 2.15530974165298533032e-06, -+ 2.08640342142196774357e-06, -+ 2.01652950105673072815e-06, -+ 1.94573143364140580303e-06, -+ 1.87405306174228235695e-06, -+ 1.80153859072609659169e-06, -+ 1.72823256195534356335e-06, -+ 1.65417982587563572154e-06, -+ 1.57942551501363361584e-06, -+ 1.50401501689824875799e-06, -+ 1.42799394692362609795e-06, -+ 1.35140812116891807883e-06, -+ 1.27430352919099175392e-06, -+ 1.19672630680600165567e-06, -+ 1.11872270887555548908e-06, -+ 1.04033908211438514454e-06, -+ 9.61621837932593595614e-07, -+ 8.82617425331797973857e-07, -+ 8.03372303868260350135e-07, -+ 7.23932916698523442543e-07, -+ 6.44345663725568065214e-07, -+ 5.64656874857124303848e-07, -+ 4.84912783394116915736e-07, -+ 4.05159499563223062539e-07, -+ 3.25442984208674460614e-07, -+ 2.45809022658112731786e-07, -+ 1.66303198777160306628e-07, -+ 8.69708692272027903669e-08, -+ 7.85713794072117322522e-09, -+-7.09931691716676215865e-08, -+-1.49535529268482347680e-07, -+-2.27725747365171486868e-07, -+-3.05519980848837318375e-07, -+-3.82874763706501346521e-07, -+-4.59747030453731194650e-07, -+-5.36094139750675601478e-07, -+-6.11873897692766847291e-07, -+-6.87044580763594041777e-07, -+-7.61564958437679165913e-07, -+-8.35394315421141605512e-07, -+-9.08492473518483241836e-07, -+-9.80819813113976304058e-07, -+-1.05233729425625164956e-06, -+-1.12300647733612530584e-06, -+-1.19278954334437999738e-06, -+-1.26164931370253481165e-06, -+-1.32954926965386881663e-06, -+-1.39645357120588546386e-06, -+-1.46232707561449405058e-06, -+-1.52713535540064995902e-06, -+-1.59084471589067184708e-06, -+-1.65342221227063001310e-06, -+-1.71483566614886781052e-06, -+-1.77505368161545113680e-06, -+-1.83404566079325564072e-06, -+-1.89178181887221348355e-06, -+-1.94823319862069280282e-06, -+-2.00337168436514229084e-06, -+-2.05717001543450264187e-06, -+-2.10960179906117775394e-06, -+-2.16064152273371070425e-06, -+-2.21026456599565581941e-06, -+-2.25844721168562965249e-06, -+-2.30516665661384152826e-06, -+-2.35040102167078548251e-06, -+-2.39412936136406383631e-06, -+-2.43633167277975945574e-06, -+-2.47698890396499016471e-06, -+-2.51608296172876497540e-06, -+-2.55359671885850362846e-06, -+-2.58951402074998920553e-06, -+-2.62381969144887382413e-06, -+-2.65649953910217082780e-06, -+-2.68754036081854804860e-06, -+-2.71692994693660306132e-06, -+-2.74465708470059315127e-06, -+-2.77071156134348277634e-06, -+-2.79508416657755373943e-06, -+-2.81776669449305452715e-06, -+-2.83875194486578497579e-06, -+-2.85803372387518624004e-06, -+-2.87560684423360267943e-06, -+-2.89146712472987382482e-06, -+-2.90561138918856466730e-06, -+-2.91803746484780862573e-06, -+-2.92874418015865453993e-06, -+-2.93773136200894074995e-06, -+-2.94499983237584587605e-06, -+-2.95055140441023676853e-06, -+-2.95438887795761926909e-06, -+-2.95651603451999344031e-06, -+-2.95693763166347438543e-06, -+-2.95565939687693110985e-06, -+-2.95268802088687215850e-06, -+-2.94803115043462330338e-06, -+-2.94169738052167357241e-06, -+-2.93369624612953431959e-06, -+-2.92403821342084482528e-06, -+-2.91273467042851974806e-06, -+-2.89979791724021359437e-06, -+-2.88524115568552475564e-06, -+-2.86907847853367548813e-06, -+-2.85132485820962740443e-06, -+-2.83199613503694229294e-06, -+-2.81110900501579379722e-06, -+-2.78868100714493697984e-06, -+-2.76473051029656053377e-06, -+-2.73927669965326065288e-06, -+-2.71233956271653185119e-06, -+-2.68393987489646478775e-06, -+-2.65409918469246439721e-06, -+-2.62283979847510613493e-06, -+-2.59018476487935021233e-06, -+-2.55615785881960940799e-06, -+-2.52078356513729817673e-06, -+-2.48408706189168983184e-06, -+-2.44609420330517115589e-06, -+-2.40683150237354884389e-06, -+-2.36632611315396292482e-06, -+-2.32460581274025857810e-06, -+-2.28169898293852692147e-06, -+-2.23763459165468254892e-06, -+-2.19244217400458949748e-06, -+-2.14615181316064773556e-06, -+-2.09879412094551363500e-06, -+-2.05040021818578316432e-06, -+-2.00100171483782110160e-06, -+-1.95063068989816435785e-06, -+-1.89931967111113481318e-06, -+-1.84710161448549238660e-06, -+-1.79400988363453340540e-06, -+-1.74007822895002694472e-06, -+-1.68534076662445773069e-06, -+-1.62983195753369262521e-06, -+-1.57358658599301992021e-06, -+-1.51663973839943020132e-06, -+-1.45902678177302702247e-06, -+-1.40078334221047426768e-06, -+-1.34194528326338093541e-06, -+-1.28254868425455118572e-06, -+-1.22262981854484770803e-06, -+-1.16222513176453179750e-06, -+-1.10137122001903489497e-06, -+-1.04010480808683832089e-06, -+-9.78462727617415689625e-07, -+-9.16481895344879420621e-07, -+-8.54199291329082445989e-07, -+-7.91651937236919995967e-07, -+-7.28876874676428218509e-07, -+-6.65911143596146899220e-07, -+-6.02791760762178925358e-07, -+-5.39555698325257482511e-07, -+-4.76239862490052774988e-07, -+-4.12881072298987595103e-07, -+-3.49516038541690854304e-07, -+-2.86181342804064272744e-07, -+-2.22913416666661733927e-07, -+-1.59748521064022687018e-07, -+-9.67227258185584328684e-08, -+-3.38718893582766938970e-08, -+ 2.87683613695412570172e-08, -+ 9.11626507777930940099e-08, -+ 1.53275874301229528026e-07, -+ 2.15073217829609376242e-07, -+ 2.76520176901766833620e-07, -+ 3.37582575650052953442e-07, -+ 3.98226585485819280378e-07, -+ 4.58418743513730979390e-07, -+ 5.18125970668006750755e-07, -+ 5.77315589558766536398e-07, -+ 6.35955342019936643428e-07, -+ 6.94013406349350241498e-07, -+ 7.51458414232049067549e-07, -+ 8.08259467337988365555e-07, -+ 8.64386153585596963575e-07, -+ 9.19808563062980821321e-07, -+ 9.74497303597860849836e-07, -+ 1.02842351597027310336e-06, -+ 1.08155888875847427063e-06, -+ 1.13387567281072351305e-06, -+ 1.18534669533762647095e-06, -+ 1.23594537361629275206e-06, -+ 1.28564572830046089292e-06, -+ 1.33442239633006842733e-06, -+ 1.38225064343414957853e-06, -+ 1.42910637622117390762e-06, -+ 1.47496615385122660710e-06, -+ 1.51980719928470874307e-06, -+ 1.56360741010246000211e-06, -+ 1.60634536889251227715e-06, -+ 1.64800035319896004223e-06, -+ 1.68855234502865835288e-06, -+ 1.72798203991181336901e-06, -+ 1.76627085551270775016e-06, -+ 1.80340093978719079100e-06, -+ 1.83935517868373362992e-06, -+ 1.87411720338522404077e-06, -+ 1.90767139708889131071e-06, -+ 1.94000290132205409853e-06, -+ 1.97109762179168084047e-06, -+ 2.00094223376600235736e-06, -+ 2.02952418698673586018e-06, -+ 2.05683171011063731075e-06, -+ 2.08285381467995650348e-06, -+ 2.10758029862004405122e-06, -+ 2.13100174926526816907e-06, -+ 2.15310954591206726866e-06, -+ 2.17389586189977999014e-06, -+ 2.19335366621972616361e-06, -+ 2.21147672465324978376e-06, -+ 2.22825960043981455305e-06, -+ 2.24369765447650766928e-06, -+ 2.25778704505024781826e-06, -+ 2.27052472710528124541e-06, -+ 2.28190845104710389511e-06, -+ 2.29193676108612702237e-06, -+ 2.30060899312292095007e-06, -+ 2.30792527217872156528e-06, -+ 2.31388650937382493307e-06, -+ 2.31849439845752497517e-06, -+ 2.32175141189321189097e-06, -+ 2.32366079650259840000e-06, -+ 2.32422656867321367902e-06, -+ 2.32345350913359285878e-06, -+ 2.32134715730082542021e-06, -+ 2.31791380520532445909e-06, -+ 2.31316049099797609704e-06, -+ 2.30709499204498586449e-06, -+ 2.29972581761599807363e-06, -+ 2.29106220117129925082e-06, -+ 2.28111409225408822216e-06, -+ 2.26989214799404362660e-06, -+ 2.25740772422860767231e-06, -+ 2.24367286624860951035e-06, -+ 2.22870029917506208745e-06, -+ 2.21250341797413235839e-06, -+ 2.19509627711749353150e-06, -+ 2.17649357989546114511e-06, -+ 2.15671066739044013289e-06, -+ 2.13576350711850353347e-06, -+ 2.11366868134673037600e-06, -+ 2.09044337509497678252e-06, -+ 2.06610536382953460056e-06, -+ 2.04067300085759004675e-06, -+ 2.01416520443082648289e-06, -+ 1.98660144456682630719e-06, -+ 1.95800172959701842290e-06, -+ 1.92838659245047678824e-06, -+ 1.89777707668168250577e-06, -+ 1.86619472225263513379e-06, -+ 1.83366155107768614062e-06, -+ 1.80020005234090271963e-06, -+ 1.76583316759495554916e-06, -+ 1.73058427565218490126e-06, -+ 1.69447717727606724807e-06, -+ 1.65753607968390744685e-06, -+ 1.61978558087014416989e-06, -+ 1.58125065376022968674e-06, -+ 1.54195663020503578884e-06, -+ 1.50192918482580689152e-06, -+ 1.46119431871970167741e-06, -+ 1.41977834303604934816e-06, -+ 1.37770786243346328062e-06, -+ 1.33500975842797161234e-06, -+ 1.29171117264239797330e-06, -+ 1.24783948996719974604e-06, -+ 1.20342232164300215316e-06, -+ 1.15848748827509167059e-06, -+ 1.11306300279010028919e-06, -+ 1.06717705334514073476e-06, -+ 1.02085798619962035772e-06, -+ 9.74134288559960768089e-07, -+ 9.27034571407410057516e-07, -+ 8.79587552319131062115e-07, -+ 8.31822038292692897728e-07, -+ 7.83766908584062082816e-07, -+ 7.35451097569259232492e-07, -+ 6.86903577639007368221e-07, -+ 6.38153342137989641187e-07, -+ 5.89229388356360835835e-07, -+ 5.40160700585000643775e-07, -+ 4.90976233243457187642e-07, -+ 4.41704894091038422500e-07, -+ 3.92375527528903780770e-07, -+ 3.43016898004928283419e-07, -+ 2.93657673529008577219e-07, -+ 2.44326409308779522962e-07, -+ 1.95051531514807551777e-07, -+ 1.45861321184445247206e-07, -+ 9.67838982725986303713e-08, -+ 4.78472058599844523217e-08, -+-9.21005474744702503668e-10, -+-4.94931931086882342167e-08, -+-9.78420376464564573501e-08, -+-1.45940458001584575920e-07, -+-1.93761626279445676683e-07, -+-2.41278982453654766505e-07, -+-2.88466248828108414775e-07, -+-3.35297444276962340684e-07, -+-3.81746898255006320598e-07, -+-4.27789264571066302430e-07, -+-4.73399534917222114972e-07, -+-5.18553052146814792709e-07, -+-5.63225523294378261140e-07, -+-6.07393032330819015965e-07, -+-6.51032052647343771201e-07, -+-6.94119459261828810033e-07, -+-7.36632540741495661135e-07, -+-7.78549010835974351873e-07, -+-8.19847019815002990540e-07, -+-8.60505165505228740834e-07, -+-9.00502504020766893004e-07, -+-9.39818560182277438796e-07, -+-9.78433337620207624330e-07, -+-1.01632732855600549368e-06, -+-1.05348152325874204263e-06, -+-1.08987741917143933322e-06, -+-1.12549702970306422209e-06, -+-1.16032289268355194760e-06, -+-1.19433807847637408471e-06, -+-1.22752619774656060195e-06, -+-1.25987140888039317136e-06, -+-1.29135842505383920910e-06, -+-1.32197252094692572073e-06, -+-1.35169953910148305289e-06, -+-1.38052589591981443812e-06, -+-1.40843858730261145449e-06, -+-1.43542519392307942238e-06, -+-1.46147388613708025001e-06, -+-1.48657342852669403075e-06, -+-1.51071318407641715728e-06, -+-1.53388311798088013959e-06, -+-1.55607380108330755062e-06, -+-1.57727641294412167073e-06, -+-1.59748274453934551225e-06, -+-1.61668520058867329841e-06, -+-1.63487680151331660552e-06, -+-1.65205118502362447400e-06, -+-1.66820260733800235944e-06, -+-1.68332594403215350657e-06, -+-1.69741669052133461662e-06, -+-1.71047096217573973425e-06, -+-1.72248549407075639464e-06, -+-1.73345764037363372509e-06, -+-1.74338537336835821088e-06, -+-1.75226728212076132235e-06, -+-1.76010257078606954751e-06, -+-1.76689105656130685063e-06, -+-1.77263316728519251133e-06, -+-1.77732993868832065915e-06, -+-1.78098301129675234904e-06, -+-1.78359462699196298197e-06, -+-1.78516762523086079262e-06, -+-1.78570543892935940332e-06, -+-1.78521209001314350987e-06, -+-1.78369218463975973750e-06, -+-1.78115090809610287207e-06, -+-1.77759401937562411090e-06, -+-1.77302784543973451412e-06, -+-1.76745927516809092517e-06, -+-1.76089575300256703723e-06, -+-1.75334527228990434716e-06, -+-1.74481636832821328595e-06, -+-1.73531811112254267233e-06, -+-1.72486009785515407010e-06, -+-1.71345244507588775535e-06, -+-1.70110578061850780769e-06, -+-1.68783123524888313502e-06, -+-1.67364043405101201273e-06, -+-1.65854548755706267844e-06, -+-1.64255898262770882562e-06, -+-1.62569397308913031908e-06, -+-1.60796397013341495032e-06, -+-1.58938293248850158598e-06, -+-1.56996525636511224694e-06, -+-1.54972576518680987152e-06, -+-1.52867969911091771475e-06, -+-1.50684270434656038082e-06, -+-1.48423082227753830000e-06, -+-1.46086047839705183582e-06, -+-1.43674847106163933866e-06, -+-1.41191196007170637922e-06, -+-1.38636845508614875617e-06, -+-1.36013580387858669546e-06, -+-1.33323218044282189100e-06, -+-1.30567607295518684662e-06, -+-1.27748627160150214245e-06, -+-1.24868185627640912946e-06, -+-1.21928218416289764874e-06, -+-1.18930687719987378282e-06, -+-1.15877580944566389195e-06, -+-1.12770909434537172875e-06, -+-1.09612707191003274157e-06, -+-1.06405029581553169958e-06, -+-1.03149952042926247822e-06, -+-9.98495687772529807701e-07, -+-9.65059914426676481838e-07, -+-9.31213478390952664649e-07, -+-8.96977805900184483883e-07, -+-8.62374458209779445916e-07, -+-8.27425118357190793336e-07, -+-7.92151577906262162004e-07, -+-7.56575723683538659993e-07, -+-7.20719524513991164460e-07, -+-6.84605017964106205270e-07, -+-6.48254297100182736997e-07, -+-6.11689497269627655389e-07, -+-5.74932782912928941364e-07, -+-5.38006334414506664360e-07, -+-5.00932334998829214645e-07, -+-4.63732957681074963406e-07, -+-4.26430352278680451037e-07, -+-3.89046632491231587593e-07, -+-3.51603863057291967577e-07, -+-3.14124046993758822385e-07, -+-2.76629112926271202933e-07, -+-2.39140902517306048575e-07, -+-2.01681157999109538668e-07, -+-1.64271509818435231461e-07, -+-1.26933464399964462611e-07, -+-8.96883920351864315859e-08, -+-5.25575149034115698627e-08, -+-1.55618952314867990895e-08, -+ 2.12775764013299585065e-08, -+ 5.79401926069906488081e-08, -+ 9.44054405745448819568e-08, -+ 1.30653013292186337421e-07, -+ 1.66662820599558795692e-07, -+ 2.02415000063943526019e-07, -+ 2.37889927675723810546e-07, -+ 2.73068228356823773127e-07, -+ 3.07930786275391611075e-07, -+ 3.42458754964303537689e-07, -+ 3.76633567235821728614e-07, -+ 4.10436944888391124100e-07, -+ 4.43850908200505621429e-07, -+ 4.76857785206895217304e-07, -+ 5.09440220752432540740e-07, -+ 5.41581185319310635908e-07, -+ 5.73263983623200237778e-07, -+ 6.04472262974243596559e-07, -+ 6.35190021398912689916e-07, -+ 6.65401615518975020092e-07, -+ 6.95091768183470321082e-07, -+ 7.24245575851318119156e-07, -+ 7.52848515719723294374e-07, -+ 7.80886452596346764020e-07, -+ 8.08345645511779781934e-07, -+ 8.35212754069576196438e-07, -+ 8.61474844531168266227e-07, -+ 8.87119395633187721666e-07, -+ 9.12134304134851931249e-07, -+ 9.36507890093278214952e-07, -+ 9.60228901864740647514e-07, -+ 9.83286520829949339681e-07, -+ 1.00567036584242141413e-06, -+ 1.02737049739676264377e-06, -+ 1.04837742151761943520e-06, -+ 1.06868209336723852610e-06, -+ 1.08827592057027628516e-06, -+ 1.10715076625582966250e-06, -+ 1.12529895181575091329e-06, -+ 1.14271325937887085896e-06, -+ 1.15938693400089711674e-06, -+ 1.17531368556989454737e-06, -+ 1.19048769042744956491e-06, -+ 1.20490359270577919489e-06, -+ 1.21855650538120670311e-06, -+ 1.23144201104462276445e-06, -+ 1.24355616238968221938e-06, -+ 1.25489548241968085992e-06, -+ 1.26545696437420174112e-06, -+ 1.27523807137680262633e-06, -+ 1.28423673580516101703e-06, -+ 1.29245135838526580120e-06, -+ 1.29988080701139087871e-06, -+ 1.30652441529377014066e-06, -+ 1.31238198083599927004e-06, -+ 1.31745376324439163689e-06, -+ 1.32174048187173134272e-06, -+ 1.32524331329766233412e-06, -+ 1.32796388854876269223e-06, -+ 1.32990429006080199844e-06, -+ 1.33106704838625078829e-06, -+ 1.33145513865011407038e-06, -+ 1.33107197675730615317e-06, -+ 1.32992141535492971224e-06, -+ 1.32800773955295289713e-06, -+ 1.32533566240690744947e-06, -+ 1.32191032016635722368e-06, -+ 1.31773726729301165080e-06, -+ 1.31282247125248552902e-06, -+ 1.30717230708382066220e-06, -+ 1.30079355175099455860e-06, -+ 1.29369337828076866856e-06, -+ 1.28587934969133494247e-06, -+ 1.27735941271630673508e-06, -+ 1.26814189132872078392e-06, -+ 1.25823548006989592576e-06, -+ 1.24764923718779050332e-06, -+ 1.23639257759010710187e-06, -+ 1.22447526561697376243e-06, -+ 1.21190740763842257076e-06, -+ 1.19869944448191002670e-06, -+ 1.18486214369488304102e-06, -+ 1.17040659164850020835e-06, -+ 1.15534418548697581979e-06, -+ 1.13968662492878543633e-06, -+ 1.12344590392501977927e-06, -+ 1.10663430218058598693e-06, -+ 1.08926437654394660522e-06, -+ 1.07134895227114512445e-06, -+ 1.05290111416989715657e-06, -+ 1.03393419762981751439e-06, -+ 1.01446177954410255975e-06, -+ 9.94497669129371662775e-07, -+ 9.74055898649058925340e-07, -+ 9.53150714046586472362e-07, -+ 9.31796565494312280840e-07, -+ 9.10008097864302267693e-07, -+ 8.87800141127001133190e-07, -+ 8.65187700683895514984e-07, -+ 8.42185947640272748656e-07, -+ 8.18810209024182236434e-07, -+ 7.95075957957726542799e-07, -+ 7.70998803786799171281e-07, -+ 7.46594482175384812077e-07, -+ 7.21878845170593542560e-07, -+ 6.96867851244202251346e-07, -+ 6.71577555317616239466e-07, -+ 6.46024098775229858276e-07, -+ 6.20223699473059009471e-07, -+ 5.94192641748351015229e-07, -+ 5.67947266436226132378e-07, -+ 5.41503960899324198661e-07, -+ 5.14879149076390935720e-07, -+ 4.88089281555710163631e-07, -+ 4.61150825679230424805e-07, -+ 4.34080255683209686411e-07, -+ 4.06894042881135298369e-07, -+ 3.79608645894640438035e-07, -+ 3.52240500938070933540e-07, -+ 3.24806012162310247429e-07, -+ 2.97321542063398880870e-07, -+ 2.69803401961428131034e-07, -+ 2.42267842555118836346e-07, -+ 2.14731044557422131870e-07, -+ 1.87209109417413194962e-07, -+ 1.59718050133666455064e-07, -+ 1.32273782164225461408e-07, -+ 1.04892114438199221113e-07, -+ 7.75887404739308462697e-08, -+ 5.03792296086632588358e-08, -+ 2.32790183440865896232e-08, -+-3.69659818658931578941e-09, -+-3.05324746267394544896e-08, -+-5.72136236741530471848e-08, -+-8.37252242245850243792e-08, -+-1.10052629376678321428e-07, -+-1.36181374294073481367e-07, -+-1.62097183920627326452e-07, -+-1.87785980544769814165e-07, -+-2.13233891209139598521e-07, -+-2.38427254961746979659e-07, -+-2.63352629945029146904e-07, -+-2.87996800319276546365e-07, -+-3.12346783017024135980e-07, -+-3.36389834325182185351e-07, -+-3.60113456291384048568e-07, -+-3.83505402952390790727e-07, -+-4.06553686380447893525e-07, -+-4.29246582545680592520e-07, -+-4.51572636991498591533e-07, -+-4.73520670320518712649e-07, -+-4.95079783488583814637e-07, -+-5.16239362904583738092e-07, -+-5.36989085333807117288e-07, -+-5.57318922603415019422e-07, -+-5.77219146106557435187e-07, -+-5.96680331105458410703e-07, -+-6.15693360830245960493e-07, -+-6.34249430372643094367e-07, -+-6.52340050373084766760e-07, -+-6.69957050499727724785e-07, -+-6.87092582718938420602e-07, -+-7.03739124355339611445e-07, -+-7.19889480941261699077e-07, -+-7.35536788854606509566e-07, -+-7.50674517744575483077e-07, -+-7.65296472744807734602e-07, -+-7.79396796473609713033e-07, -+-7.92969970821073911788e-07, -+-8.06010818523039620686e-07, -+-8.18514504521946435161e-07, -+-8.30476537114796092696e-07, -+-8.41892768888536356313e-07, -+-8.52759397443332283837e-07, -+-8.63072965904298430121e-07, -+-8.72830363222411219091e-07, -+-8.82028824265426919197e-07, -+-8.90665929699767875244e-07, -+-8.98739605664438117104e-07, -+-9.06248123238310469019e-07, -+-9.13190097701748130089e-07, -+-9.19564487594497149126e-07, -+-9.25370593571038710503e-07, -+-9.30608057055225739965e-07, -+-9.35276858695977623270e-07, -+-9.39377316625935791305e-07, -+-9.42910084525095898317e-07, -+-9.45876149491550481034e-07, -+-9.48276829721570430580e-07, -+-9.50113772001370499672e-07, -+-9.51388949013003911569e-07, -+-9.52104656456936804630e-07, -+-9.52263509993941125969e-07, -+-9.51868442009069101583e-07, -+-9.50922698200532126112e-07, -+-9.49429833996434605628e-07, -+-9.47393710802382531800e-07, -+-9.44818492083089586131e-07, -+-9.41708639281177158997e-07, -+-9.38068907576461653450e-07, -+-9.33904341489098676729e-07, -+-9.29220270330045943147e-07, -+-9.24022303502344510841e-07, -+-9.18316325656801089995e-07, -+-9.12108491705894399878e-07, -+-9.05405221699414408662e-07, -+-8.98213195565829804566e-07, -+-8.90539347723179252958e-07, -+-8.82390861563444624379e-07, -+-8.73775163814392542299e-07, -+-8.64699918782943232475e-07, -+-8.55173022484167478071e-07, -+-8.45202596660064471297e-07, -+-8.34796982692334232859e-07, -+-8.23964735413379340429e-07, -+-8.12714616819815811869e-07, -+-8.01055589692947371830e-07, -+-7.88996811130245460602e-07, -+-7.76547625992668790471e-07, -+-7.63717560271924312522e-07, -+-7.50516314382267606353e-07, -+-7.36953756381291203872e-07, -+-7.23039915124214685738e-07, -+-7.08784973356202141615e-07, -+-6.94199260747239361661e-07, -+-6.79293246874135843310e-07, -+-6.64077534154205262483e-07, -+-6.48562850735273878957e-07, -+-6.32760043346189360169e-07, -+-6.16680070113397994562e-07, -+-6.00333993346826913225e-07, -+-5.83732972300828602773e-07, -+-5.66888255913847209443e-07, -+-5.49811175532121660261e-07, -+-5.32513137621453772346e-07, -+-5.15005616471779758539e-07, -+-4.97300146899023921939e-07, -+-4.79408316948729425562e-07, -+-4.61341760605933600647e-07, -+-4.43112150515734081304e-07, -+-4.24731190718963677602e-07, -+-4.06210609407354576801e-07, -+-3.87562151702548692569e-07, -+-3.68797572463265930466e-07, -+-3.49928629124907727258e-07, -+-3.30967074575835952180e-07, -+-3.11924650074512148172e-07, -+-2.92813078211650909737e-07, -+-2.73644055921480525304e-07, -+-2.54429247546160283934e-07, -+-2.35180277957349847825e-07, -+-2.15908725738868123295e-07, -+-1.96626116434371227810e-07, -+-1.77343915863602168094e-07, -+-1.58073523511642661593e-07, -+-1.38826265993976471359e-07, -+-1.19613390601659479034e-07, -+-1.00446058929897965640e-07, -+-8.13353405935726935918e-08, -+-6.22922070331324441674e-08, -+-4.33275254142092293362e-08, -+-2.44520526242285169324e-08, -+ 0 /* Need a final zero coefficient */ -+ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/mid_qual_coeffs.h k3b-r948463.patched/libk3b/plugin/libsamplerate/mid_qual_coeffs.h ---- k3b-r948463/libk3b/plugin/libsamplerate/mid_qual_coeffs.h 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/mid_qual_coeffs.h 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,5315 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+ -+/* -+** f = make_filter (19, 128, 100.2) ; -+** Pass band width : 0.0039063 (should be 0.0039062) -+** Stop band atten. : 100.35 dB -+** -3dB band width : 0.665 -+** half length : 5285 -+** increment : 128 -+*/ -+ -+ 9.20381425342432724079e-01, -+ 9.20302993473144703707e-01, -+ 9.20067721990720843728e-01, -+ 9.19675683262634269255e-01, -+ 9.19126997871811179941e-01, -+ 9.18421834572361261984e-01, -+ 9.17560410227629907887e-01, -+ 9.16542989730570578644e-01, -+ 9.15369885906517022356e-01, -+ 9.14041459398341027409e-01, -+ 9.12558118534084750095e-01, -+ 9.10920319177104365060e-01, -+ 9.09128564558774221460e-01, -+ 9.07183405093831884969e-01, -+ 9.05085438178449441793e-01, -+ 9.02835307971073142141e-01, -+ 9.00433705156164609917e-01, -+ 8.97881366690907456451e-01, -+ 8.95179075534992096941e-01, -+ 8.92327660363587904513e-01, -+ 8.89327995263616055688e-01, -+ 8.86180999413433867495e-01, -+ 8.82887636746086057471e-01, -+ 8.79448915596223401714e-01, -+ 8.75865888330860098421e-01, -+ 8.72139650964099621966e-01, -+ 8.68271342755988384532e-01, -+ 8.64262145795659297853e-01, -+ 8.60113284568922442652e-01, -+ 8.55826025510500576488e-01, -+ 8.51401676541053253899e-01, -+ 8.46841586589208494829e-01, -+ 8.42147145098761318316e-01, -+ 8.37319781521271289115e-01, -+ 8.32360964794223279206e-01, -+ 8.27272202804994805092e-01, -+ 8.22055041840814237908e-01, -+ 8.16711066024966680921e-01, -+ 8.11241896739414047879e-01, -+ 8.05649192034131989004e-01, -+ 7.99934646023336304310e-01, -+ 7.94099988268876399999e-01, -+ 7.88146983151028934778e-01, -+ 7.82077429226948894758e-01, -+ 7.75893158577014574462e-01, -+ 7.69596036139359007677e-01, -+ 7.63187959032822549332e-01, -+ 7.56670855868614267159e-01, -+ 7.50046686050942712498e-01, -+ 7.43317439066910390366e-01, -+ 7.36485133765944488538e-01, -+ 7.29551817629036647439e-01, -+ 7.22519566028118842560e-01, -+ 7.15390481475825179558e-01, -+ 7.08166692865972891013e-01, -+ 7.00850354705043199210e-01, -+ 6.93443646334978125445e-01, -+ 6.85948771147587565977e-01, -+ 6.78367955790895149626e-01, -+ 6.70703449367723969488e-01, -+ 6.62957522626846706970e-01, -+ 6.55132467147013564102e-01, -+ 6.47230594514182855370e-01, -+ 6.39254235492288658271e-01, -+ 6.31205739187853498429e-01, -+ 6.23087472208794013184e-01, -+ 6.14901817817740559136e-01, -+ 6.06651175080214377644e-01, -+ 5.98337958007979286990e-01, -+ 5.89964594697926170141e-01, -+ 5.81533526466822769940e-01, -+ 5.73047206982255086238e-01, -+ 5.64508101390120198282e-01, -+ 5.55918685439004245374e-01, -+ 5.47281444601789957005e-01, -+ 5.38598873194839455891e-01, -+ 5.29873473495091729113e-01, -+ 5.21107754855426819063e-01, -+ 5.12304232818644900149e-01, -+ 5.03465428230393974296e-01, -+ 4.94593866351407229764e-01, -+ 4.85692075969380243627e-01, -+ 4.76762588510854068424e-01, -+ 4.67807937153435049460e-01, -+ 4.58830655938690934459e-01, -+ 4.49833278886094922733e-01, -+ 4.40818339108329071419e-01, -+ 4.31788367928309491095e-01, -+ 4.22745893998278443604e-01, -+ 4.13693442421281976085e-01, -+ 4.04633533875401296687e-01, -+ 3.95568683741051418945e-01, -+ 3.86501401231698737959e-01, -+ 3.77434188528326886036e-01, -+ 3.68369539917981492216e-01, -+ 3.59309940936731631034e-01, -+ 3.50257867517365428789e-01, -+ 3.41215785142159444554e-01, -+ 3.32186148001037462318e-01, -+ 3.23171398155436717659e-01, -+ 3.14173964708215069930e-01, -+ 3.05196262979898602641e-01, -+ 2.96240693691587786418e-01, -+ 2.87309642154843669637e-01, -+ 2.78405477468841422439e-01, -+ 2.69530551725107592187e-01, -+ 2.60687199220140719547e-01, -+ 2.51877735676207303861e-01, -+ 2.43104457470603635416e-01, -+ 2.34369640873684476068e-01, -+ 2.25675541295929371621e-01, -+ 2.17024392544335781308e-01, -+ 2.08418406088417329514e-01, -+ 1.99859770336071163044e-01, -+ 1.91350649919593329695e-01, -+ 1.82893184992099055997e-01, -+ 1.74489490534610131034e-01, -+ 1.66141655674062554970e-01, -+ 1.57851743012483253237e-01, -+ 1.49621787967589486845e-01, -+ 1.41453798125033586297e-01, -+ 1.33349752602548832225e-01, -+ 1.25311601426208646393e-01, -+ 1.17341264919035181968e-01, -+ 1.09440633102170670199e-01, -+ 1.01611565108827309190e-01, -+ 9.38558886112234730392e-02, -+ 8.61753992607110774760e-02, -+ 7.85718601412871003875e-02, -+ 7.10470012366834768880e-02, -+ 6.36025189112217892440e-02, -+ 5.62400754046094436545e-02, -+ 4.89612983408535609731e-02, -+ 4.17677802514581156257e-02, -+ 3.46610781130688300200e-02, -+ 2.76427128997189970605e-02, -+ 2.07141691498255002546e-02, -+ 1.38768945480800508230e-02, -+ 7.13229952237052523822e-03, -+ 4.81756855863834190269e-04, -+-6.07339868562557089193e-03, -+-1.25318707108654243260e-02, -+-1.88924015449200635719e-02, -+-2.51537725552469157431e-02, -+-3.13148044620756293988e-02, -+-3.73743576329800403224e-02, -+-4.33313323615558548818e-02, -+-4.91846691301275826258e-02, -+-5.49333488564130167919e-02, -+-6.05763931240776432041e-02, -+-6.61128643971268664670e-02, -+-7.15418662180770936754e-02, -+-7.68625433898662002719e-02, -+-8.20740821414635834952e-02, -+-8.71757102771481412473e-02, -+-9.21666973094307923065e-02, -+-9.70463545756019146937e-02, -+-1.01814035337895597566e-01, -+-1.06469134867262671396e-01, -+-1.11011090510758053673e-01, -+-1.15439381742549487808e-01, -+-1.19753530198565633080e-01, -+-1.23953099694804141917e-01, -+-1.28037696229327896402e-01, -+-1.32006967967990523904e-01, -+-1.35860605213926149970e-01, -+-1.39598340360859801690e-01, -+-1.43219947830287880342e-01, -+-1.46725243992595816289e-01, -+-1.50114087072177021520e-01, -+-1.53386377036633686499e-01, -+-1.56542055470133889550e-01, -+-1.59581105431021136321e-01, -+-1.62503551293762121821e-01, -+-1.65309458575341239328e-01, -+-1.67998933746201201123e-01, -+-1.70572124025848675943e-01, -+-1.73029217163238657751e-01, -+-1.75370441202067656183e-01, -+-1.77596064231102662712e-01, -+-1.79706394119684198518e-01, -+-1.81701778238549410682e-01, -+-1.83582603166114660675e-01, -+-1.85349294380384888026e-01, -+-1.87002315936635632454e-01, -+-1.88542170131047126524e-01, -+-1.89969397150449442746e-01, -+-1.91284574708360660678e-01, -+-1.92488317667500768993e-01, -+-1.93581277648966099125e-01, -+-1.94564142628253139433e-01, -+-1.95437636518337454206e-01, -+-1.96202518740000220188e-01, -+-1.96859583779614849552e-01, -+-1.97409660734602421250e-01, -+-1.97853612846778603718e-01, -+-1.98192337023800152496e-01, -+-1.98426763348949375398e-01, -+-1.98557854579480330681e-01, -+-1.98586605633759266665e-01, -+-1.98514043067442053081e-01, -+-1.98341224538922389353e-01, -+-1.98069238264312830200e-01, -+-1.97699202462185225082e-01, -+-1.97232264788348182760e-01, -+-1.96669601760900314424e-01, -+-1.96012418175829317146e-01, -+-1.95261946513421102978e-01, -+-1.94419446335739987131e-01, -+-1.93486203675455742390e-01, -+-1.92463530416288858271e-01, -+-1.91352763665352892941e-01, -+-1.90155265117664590280e-01, -+-1.88872420413116609561e-01, -+-1.87505638486184761371e-01, -+-1.86056350908662238020e-01, -+-1.84526011225710412367e-01, -+-1.82916094285511643402e-01, -+-1.81228095562823987574e-01, -+-1.79463530476726945695e-01, -+-1.77623933702856395822e-01, -+-1.75710858480429804596e-01, -+-1.73725875914355953888e-01, -+-1.71670574272733023058e-01, -+-1.69546558280039033617e-01, -+-1.67355448406313112031e-01, -+-1.65098880152636018348e-01, -+-1.62778503333212087867e-01, -+-1.60395981354360589455e-01, -+-1.57952990490720118766e-01, -+-1.55451219158974890400e-01, -+-1.52892367189410044448e-01, -+-1.50278145095599335868e-01, -+-1.47610273342536069130e-01, -+-1.44890481613516919346e-01, -+-1.42120508076075402482e-01, -+-1.39302098647282379673e-01, -+-1.36437006258713466877e-01, -+-1.33526990121390659594e-01, -+-1.30573814991000874963e-01, -+-1.27579250433698415668e-01, -+-1.24545070092789769700e-01, -+-1.21473050956605960193e-01, -+-1.18364972627860873255e-01, -+-1.15222616594794866063e-01, -+-1.12047765504399418623e-01, -+-1.08842202438021534716e-01, -+-1.05607710189640782716e-01, -+-1.02346070547107481641e-01, -+-9.90590635766376431670e-02, -+-9.57484669108492753020e-02, -+-9.24160550406251946054e-02, -+-8.90635986110882432731e-02, -+-8.56928637219669248060e-02, -+-8.23056112326309707861e-02, -+-7.89035960720733398066e-02, -+-7.54885665541076555929e-02, -+-7.20622636980560449249e-02, -+-6.86264205551892075841e-02, -+-6.51827615411845612270e-02, -+-6.17330017748623643969e-02, -+-5.82788464234569522637e-02, -+-5.48219900546751473525e-02, -+-5.13641159957934842484e-02, -+-4.79068957000384210154e-02, -+-4.44519881204940292552e-02, -+-4.10010390917734252048e-02, -+-3.75556807196898087553e-02, -+-3.41175307791583073969e-02, -+-3.06881921205520574736e-02, -+-2.72692520847377800619e-02, -+-2.38622819270072061837e-02, -+-2.04688362501167613050e-02, -+-1.70904524466470482402e-02, -+-1.37286501508831742385e-02, -+-1.03849307004176948793e-02, -+-7.06077660767133897385e-03, -+-3.75765104151932821316e-03, -+-4.76997319211794638602e-04, -+ 2.77976159123423990222e-03, -+ 6.01122355799481745270e-03, -+ 9.21600776157955291212e-03, -+ 1.23927551599897541740e-02, -+ 1.55401289427332476439e-02, -+ 1.86568149735395066857e-02, -+ 2.17415222216296409596e-02, -+ 2.47929831813923952366e-02, -+ 2.78099542803314468686e-02, -+ 3.07912162751492260448e-02, -+ 3.37355746358383862260e-02, -+ 3.66418599176616260893e-02, -+ 3.95089281209001219608e-02, -+ 4.23356610382612519317e-02, -+ 4.51209665898422082608e-02, -+ 4.78637791455433780907e-02, -+ 5.05630598348475110426e-02, -+ 5.32177968438652948535e-02, -+ 5.58270056995735716732e-02, -+ 5.83897295411673830645e-02, -+ 6.09050393784494881189e-02, -+ 6.33720343372027039575e-02, -+ 6.57898418914746596631e-02, -+ 6.81576180827297012366e-02, -+ 7.04745477258180152980e-02, -+ 7.27398446017178401668e-02, -+ 7.49527516370186164263e-02, -+ 7.71125410701128527480e-02, -+ 7.92185146040738086270e-02, -+ 8.12700035461998010478e-02, -+ 8.32663689342140606042e-02, -+ 8.52070016491116299928e-02, -+ 8.70913225146551783773e-02, -+ 8.89187823835221463620e-02, -+ 9.06888622101164748601e-02, -+ 9.24010731100602389354e-02, -+ 9.40549564063880572107e-02, -+ 9.56500836624715466971e-02, -+ 9.71860567017110571486e-02, -+ 9.86625076140278250980e-02, -+ 1.00079098749209560726e-01, -+ 1.01435522697153571170e-01, -+ 1.02731502255068357643e-01, -+ 1.03966790381692222867e-01, -+ 1.05141170138599651662e-01, -+ 1.06254454618664812005e-01, -+ 1.07306486861763028529e-01, -+ 1.08297139757793273174e-01, -+ 1.09226315937109075271e-01, -+ 1.10093947648453857613e-01, -+ 1.10899996624498939357e-01, -+ 1.11644453935089996155e-01, -+ 1.12327339828307448677e-01, -+ 1.12948703559463028978e-01, -+ 1.13508623208143408223e-01, -+ 1.14007205483430296145e-01, -+ 1.14444585517425839738e-01, -+ 1.14820926647215854066e-01, -+ 1.15136420185409663053e-01, -+ 1.15391285179401628658e-01, -+ 1.15585768159497587204e-01, -+ 1.15720142876065593129e-01, -+ 1.15794710025859670655e-01, -+ 1.15809796967682440694e-01, -+ 1.15765757427549992320e-01, -+ 1.15662971193527863711e-01, -+ 1.15501843800413089847e-01, -+ 1.15282806204434651320e-01, -+ 1.15006314448161270358e-01, -+ 1.14672849315791761104e-01, -+ 1.14282915979024457531e-01, -+ 1.13837043633692902578e-01, -+ 1.13335785127364224723e-01, -+ 1.12779716578100402957e-01, -+ 1.12169436984582482353e-01, -+ 1.11505567827804186187e-01, -+ 1.10788752664543674320e-01, -+ 1.10019656712822919142e-01, -+ 1.09198966429570901160e-01, -+ 1.08327389080707270352e-01, -+ 1.07405652303864840302e-01, -+ 1.06434503663973611953e-01, -+ 1.05414710201933409239e-01, -+ 1.04347057976597171192e-01, -+ 1.03232351600300586991e-01, -+ 1.02071413768162977398e-01, -+ 1.00865084781397620906e-01, -+ 9.96142220648654208581e-02, -+ 9.83196996791074473432e-02, -+ 9.69824078270985767691e-02, -+ 9.56032523559593450102e-02, -+ 9.41831542538692501054e-02, -+ 9.27230491424269054335e-02, -+ 9.12238867646961854030e-02, -+ 8.96866304691910365410e-02, -+ 8.81122566900391923639e-02, -+ 8.65017544235756330462e-02, -+ 8.48561247016157149670e-02, -+ 8.31763800616522747111e-02, -+ 8.14635440142294359189e-02, -+ 7.97186505077449730772e-02, -+ 7.79427433909263833733e-02, -+ 7.61368758732360317865e-02, -+ 7.43021099834537401829e-02, -+ 7.24395160266886328770e-02, -+ 7.05501720400689841250e-02, -+ 6.86351632473627820685e-02, -+ 6.66955815127786150187e-02, -+ 6.47325247941935855156e-02, -+ 6.27470965960619936341e-02, -+ 6.07404054222478104186e-02, -+ 5.87135642290347939398e-02, -+ 5.66676898785539728820e-02, -+ 5.46039025928778953833e-02, -+ 5.25233254090291187821e-02, -+ 5.04270836351378148876e-02, -+ 4.83163043079990264794e-02, -+ 4.61921156522659484556e-02, -+ 4.40556465415169601352e-02, -+ 4.19080259614387148903e-02, -+ 3.97503824753536946779e-02, -+ 3.75838436923350352470e-02, -+ 3.54095357381316658274e-02, -+ 3.32285827291374860626e-02, -+ 3.10421062496353539206e-02, -+ 2.88512248325339532018e-02, -+ 2.66570534438272561950e-02, -+ 2.44607029709929951755e-02, -+ 2.22632797155504665032e-02, -+ 2.00658848899928875242e-02, -+ 1.78696141193047525197e-02, -+ 1.56755569472778119589e-02, -+ 1.34847963478305701845e-02, -+ 1.12984082415343196903e-02, -+ 9.11746101754993230892e-03, -+ 6.94301506117043099736e-03, -+ 4.77612228716621078223e-03, -+ 2.61782567912160601259e-03, -+ 4.69158834953931199938e-04, -+-1.66885448120184334310e-03, -+-3.79520078056328966087e-03, -+-5.90887728454510350456e-03, -+-8.00889235270581950621e-03, -+-1.00942659036281096735e-02, -+-1.21640298285631744818e-02, -+-1.42172283976795769261e-02, -+-1.62529186587560860178e-02, -+-1.82701708281667977996e-02, -+-2.02680686740044913030e-02, -+-2.22457098911984715861e-02, -+-2.42022064684845883420e-02, -+-2.61366850470883434199e-02, -+-2.80482872709881952966e-02, -+-2.99361701286294627777e-02, -+-3.17995062859638480401e-02, -+-3.36374844106955839251e-02, -+-3.54493094876133021942e-02, -+-3.72342031249025678941e-02, -+-3.89914038513265101549e-02, -+-4.07201674041748756805e-02, -+-4.24197670078825320172e-02, -+-4.40894936432238218615e-02, -+-4.57286563069958726380e-02, -+-4.73365822621031329120e-02, -+-4.89126172779674045499e-02, -+-5.04561258611889093539e-02, -+-5.19664914763842064604e-02, -+-5.34431167571409876382e-02, -+-5.48854237070259126652e-02, -+-5.62928538905927214331e-02, -+-5.76648686143374361590e-02, -+-5.90009490975559047765e-02, -+-6.03005966330638770723e-02, -+-6.15633327377404851455e-02, -+-6.27886992928659848356e-02, -+-6.39762586742271682771e-02, -+-6.51255938719669663639e-02, -+-6.62363086001636625078e-02, -+-6.73080273961252362191e-02, -+-6.83403957093936531564e-02, -+-6.93330799804545011567e-02, -+-7.02857677091563298744e-02, -+-7.11981675128459667867e-02, -+-7.20700091742300513742e-02, -+-7.29010436789823551562e-02, -+-7.36910432431144429843e-02, -+-7.44398013301399846808e-02, -+-7.51471326580581411303e-02, -+-7.58128731961966451092e-02, -+-7.64368801519491603003e-02, -+-7.70190319474562123947e-02, -+-7.75592281862732546571e-02, -+-7.80573896100858338754e-02, -+-7.85134580455219832640e-02, -+-7.89273963411314394278e-02, -+-7.92991882945930925963e-02, -+-7.96288385702248469045e-02, -+-7.99163726068679303172e-02, -+-8.01618365162299895132e-02, -+-8.03652969717648935077e-02, -+-8.05268410881816582014e-02, -+-8.06465762916719064446e-02, -+-8.07246301809524391402e-02, -+-8.07611503792237672705e-02, -+-8.07563043771459543319e-02, -+-8.07102793669422780010e-02, -+-8.06232820677405676024e-02, -+-8.04955385422673613816e-02, -+-8.03272940050135386691e-02, -+-8.01188126219958829388e-02, -+-7.98703773022373386681e-02, -+-7.95822894810978148650e-02, -+-7.92548688955872077111e-02, -+-7.88884533517974217975e-02, -+-7.84833984845913629202e-02, -+-7.80400775096937587838e-02, -+-7.75588809683271651618e-02, -+-7.70402164645424963885e-02, -+-7.64845083953963472689e-02, -+-7.58921976741284420864e-02, -+-7.52637414464975562645e-02, -+-7.45996128004335623540e-02, -+-7.39003004691712872543e-02, -+-7.31663085280282593503e-02, -+-7.23981560849959182580e-02, -+-7.15963769653113479841e-02, -+-7.07615193901859063086e-02, -+-6.98941456498595042879e-02, -+-6.89948317711622932658e-02, -+-6.80641671797573843961e-02, -+-6.71027543572484258538e-02, -+-6.61112084933319216207e-02, -+-6.50901571331780198770e-02, -+-6.40402398202278705375e-02, -+-6.29621077345897672828e-02, -+-6.18564233272276414732e-02, -+-6.07238599501278633608e-02, -+-5.95651014826367106170e-02, -+-5.83808419541620299276e-02, -+-5.71717851634284957019e-02, -+-5.59386442944868889082e-02, -+-5.46821415296654678162e-02, -+-5.34030076596649916354e-02, -+-5.21019816909916097525e-02, -+-5.07798104509243897198e-02, -+-4.94372481902171159729e-02, -+-4.80750561837304871138e-02, -+-4.66940023291949543593e-02, -+-4.52948607443019804486e-02, -+-4.38784113623226362799e-02, -+-4.24454395264523623443e-02, -+-4.09967355830820473495e-02, -+-3.95330944741913298257e-02, -+-3.80553153290659820773e-02, -+-3.65642010555344981748e-02, -+-3.50605579309238787888e-02, -+-3.35451951929296859900e-02, -+-3.20189246305989869135e-02, -+-3.04825601756209853266e-02, -+-2.89369174941192380812e-02, -+-2.73828135791425071599e-02, -+-2.58210663440446019923e-02, -+-2.42524942169475357656e-02, -+-2.26779157364765740490e-02, -+-2.10981491489598167732e-02, -+-1.95140120072784944982e-02, -+-1.79263207715556205368e-02, -+-1.63358904118689959861e-02, -+-1.47435340131725541729e-02, -+-1.31500623826066934119e-02, -+-1.15562836593809201841e-02, -+-9.96300292740478522779e-03, -+-8.37102183084635804999e-03, -+-6.78113819279113280714e-03, -+-5.19414563717416049443e-03, -+-3.61083321415951816885e-03, -+-2.03198502912982836496e-03, -+-4.58379875457016528785e-04, -+ 1.10920912878408159559e-03, -+ 2.67001489999788748156e-03, -+ 4.22327674398739229267e-03, -+ 5.76824070645192907292e-03, -+ 7.30415991891262585123e-03, -+ 8.83029493991307340428e-03, -+ 1.03459140913472139728e-02, -+ 1.18502937897689078484e-02, -+ 1.33427188725394711699e-02, -+ 1.48224829186761088151e-02, -+ 1.62888885642629918649e-02, -+ 1.77412478122899279487e-02, -+ 1.91788823367922064977e-02, -+ 2.06011237811589489888e-02, -+ 2.20073140504912223570e-02, -+ 2.33968055978847275234e-02, -+ 2.47689617045220474012e-02, -+ 2.61231567534600458980e-02, -+ 2.74587764969989392427e-02, -+ 2.87752183175302503337e-02, -+ 3.00718914817559267172e-02, -+ 3.13482173881795972425e-02, -+ 3.26036298077741898416e-02, -+ 3.38375751177299316508e-02, -+ 3.50495125281968383790e-02, -+ 3.62389143019323234363e-02, -+ 3.74052659667742509741e-02, -+ 3.85480665208594169835e-02, -+ 3.96668286305130596281e-02, -+ 4.07610788207384555637e-02, -+ 4.18303576582400582495e-02, -+ 4.28742199269152648999e-02, -+ 4.38922347957571498678e-02, -+ 4.48839859791098777508e-02, -+ 4.58490718892284668251e-02, -+ 4.67871057810912635566e-02, -+ 4.76977158894239181008e-02, -+ 4.85805455578927625204e-02, -+ 4.94352533604324947958e-02, -+ 5.02615132146747092823e-02, -+ 5.10590144874505449946e-02, -+ 5.18274620923405288098e-02, -+ 5.25665765792536696099e-02, -+ 5.32760942160161940495e-02, -+ 5.39557670619600152073e-02, -+ 5.46053630334999498541e-02, -+ 5.52246659616954863048e-02, -+ 5.58134756417962285546e-02, -+ 5.63716078747732926568e-02, -+ 5.68988945008435942352e-02, -+ 5.73951834249974424118e-02, -+ 5.78603386345437897820e-02, -+ 5.82942402086913807890e-02, -+ 5.86967843201876629533e-02, -+ 5.90678832290408364902e-02, -+ 5.94074652683551154841e-02, -+ 5.97154748223121395467e-02, -+ 5.99918722963358186373e-02, -+ 6.02366340794795798730e-02, -+ 6.04497524990822918123e-02, -+ 6.06312357677402588574e-02, -+ 6.07811079226447462109e-02, -+ 6.08994087573431347460e-02, -+ 6.09861937459786132565e-02, -+ 6.10415339600735781800e-02, -+ 6.10655159779199541159e-02, -+ 6.10582417866455048894e-02, -+ 6.10198286770287368075e-02, -+ 6.09504091311373757955e-02, -+ 6.08501307028684462752e-02, -+ 6.07191558914731074892e-02, -+ 6.05576620081493127712e-02, -+ 6.03658410357920463540e-02, -+ 6.01438994819913433365e-02, -+ 5.98920582253712890930e-02, -+ 5.96105523553696475814e-02, -+ 5.92996310055547357076e-02, -+ 5.89595571805846263569e-02, -+ 5.85906075769135961662e-02, -+ 5.81930723973530239501e-02, -+ 5.77672551595985947492e-02, -+ 5.73134724988377947108e-02, -+ 5.68320539645518138516e-02, -+ 5.63233418116318024227e-02, -+ 5.57876907859301829351e-02, -+ 5.52254679043691909524e-02, -+ 5.46370522297332239514e-02, -+ 5.40228346402717510277e-02, -+ 5.33832175942438452720e-02, -+ 5.27186148895339920517e-02, -+ 5.20294514184751963337e-02, -+ 5.13161629180133513350e-02, -+ 5.05791957153526455793e-02, -+ 4.98190064692186004858e-02, -+ 4.90360619068817560340e-02, -+ 4.82308385570846126500e-02, -+ 4.74038224790149093080e-02, -+ 4.65555089874726130139e-02, -+ 4.56864023743756911267e-02, -+ 4.47970156267560870589e-02, -+ 4.38878701413918104191e-02, -+ 4.29594954362301426065e-02, -+ 4.20124288587509150950e-02, -+ 4.10472152914242438548e-02, -+ 4.00644068544164441703e-02, -+ 3.90645626056996611575e-02, -+ 3.80482482387188569728e-02, -+ 3.70160357777762072384e-02, -+ 3.59685032712854929615e-02, -+ 3.49062344830574772248e-02, -+ 3.38298185817733007563e-02, -+ 3.27398498288028888537e-02, -+ 3.16369272645302956892e-02, -+ 3.05216543933420694779e-02, -+ 2.93946388674391281826e-02, -+ 2.82564921696314662325e-02, -+ 2.71078292952747976208e-02, -+ 2.59492684335090040282e-02, -+ 2.47814306479556094309e-02, -+ 2.36049395570361274233e-02, -+ 2.24204210140672086093e-02, -+ 2.12285027872915685321e-02, -+ 2.00298142400041241651e-02, -+ 1.88249860109280658937e-02, -+ 1.76146496949991550329e-02, -+ 1.63994375247131611573e-02, -+ 1.51799820521929199751e-02, -+ 1.39569158321288973312e-02, -+ 1.27308711057459132687e-02, -+ 1.15024794859493635635e-02, -+ 1.02723716438034538834e-02, -+ 9.04117699648874194318e-03, -+ 7.80952339689281599400e-03, -+ 6.57803682497710377058e-03, -+ 5.34734108107065390925e-03, -+ 4.11805748123311807923e-03, -+ 2.89080455483250748500e-03, -+ 1.66619774448026097997e-03, -+ 4.44849108462394484276e-04, -+-7.72632974192619353775e-04, -+-1.98564409587129479459e-03, -+-3.19358410962515939027e-03, -+-4.39585741537518604610e-03, -+-5.59187324294384193596e-03, -+-6.78104593178024354222e-03, -+-7.96279520725374188872e-03, -+-9.13654645338901789942e-03, -+-1.03017309819179135599e-02, -+-1.14577862975281108415e-02, -+-1.26041563591888523127e-02, -+-1.37402918374362748022e-02, -+-1.48656503675044012608e-02, -+-1.59796967981878784704e-02, -+-1.70819034363291870349e-02, -+-1.81717502868205364741e-02, -+-1.92487252880175659098e-02, -+-2.03123245424604338683e-02, -+-2.13620525428040268501e-02, -+-2.23974223928605567502e-02, -+-2.34179560236593246880e-02, -+-2.44231844044319607034e-02, -+-2.54126477484353970049e-02, -+-2.63858957135253285875e-02, -+-2.73424875973971651111e-02, -+-2.82819925274152735029e-02, -+-2.92039896449517132060e-02, -+-3.01080682841611060874e-02, -+-3.09938281451182656712e-02, -+-3.18608794612527251866e-02, -+-3.27088431610126698090e-02, -+-3.35373510236956218211e-02, -+-3.43460458293886189418e-02, -+-3.51345815029584646050e-02, -+-3.59026232520415142235e-02, -+-3.66498476989806504234e-02, -+-3.73759430066653228208e-02, -+-3.80806089982259413085e-02, -+-3.87635572705481989964e-02, -+-3.94245113015637763110e-02, -+-4.00632065512871449187e-02, -+-4.06793905565660182666e-02, -+-4.12728230195161804872e-02, -+-4.18432758896181006270e-02, -+-4.23905334394521562946e-02, -+-4.29143923340550431655e-02, -+-4.34146616938810431252e-02, -+-4.38911631513571320884e-02, -+-4.43437309010235244933e-02, -+-4.47722117432520008706e-02, -+-4.51764651215424140052e-02, -+-4.55563631533957985598e-02, -+-4.59117906547691981278e-02, -+-4.62426451581186420681e-02, -+-4.65488369240420196693e-02, -+-4.68302889465325583584e-02, -+-4.70869369518625499604e-02, -+-4.73187293911136036551e-02, -+-4.75256274263797934276e-02, -+-4.77076049106652452791e-02, -+-4.78646483615089088359e-02, -+-4.79967569283660938639e-02, -+-4.81039423537813551346e-02, -+-4.81862289283918193705e-02, -+-4.82436534398009986280e-02, -+-4.82762651153660765635e-02, -+-4.82841255589469900422e-02, -+-4.82673086816636301433e-02, -+-4.82259006267171733140e-02, -+-4.81599996883273831494e-02, -+-4.80697162248445095112e-02, -+-4.79551725660972635867e-02, -+-4.78165029150386111656e-02, -+-4.76538532437557615928e-02, -+-4.74673811839129988766e-02, -+-4.72572559116971463444e-02, -+-4.70236580273407853148e-02, -+-4.67667794292976057857e-02, -+-4.64868231831488537553e-02, -+-4.61840033853220879867e-02, -+-4.58585450217043055776e-02, -+-4.55106838212354786188e-02, -+-4.51406661045703067048e-02, -+-4.47487486278967949715e-02, -+-4.43351984220053674246e-02, -+-4.39002926267011706063e-02, -+-4.34443183206557337339e-02, -+-4.29675723467968784242e-02, -+-4.24703611333365343983e-02, -+-4.19530005105376649355e-02, -+-4.14158155233245728333e-02, -+-4.08591402398425090903e-02, -+-4.02833175560728118381e-02, -+-3.96886989966125647289e-02, -+-3.90756445117304562764e-02, -+-3.84445222708086342678e-02, -+-3.77957084522856853748e-02, -+-3.71295870302152039577e-02, -+-3.64465495575560030628e-02, -+-3.57469949463106728693e-02, -+-3.50313292446328208851e-02, -+-3.42999654110217877534e-02, -+-3.35533230857262762536e-02, -+-3.27918283594781714840e-02, -+-3.20159135396808763874e-02, -+-3.12260169141751545152e-02, -+-3.04225825127068701115e-02, -+-2.96060598662241068746e-02, -+-2.87769037641279583351e-02, -+-2.79355740096046620269e-02, -+-2.70825351731674365818e-02, -+-2.62182563445339765484e-02, -+-2.53432108829716763732e-02, -+-2.44578761662360491536e-02, -+-2.35627333382326387134e-02, -+-2.26582670555346976649e-02, -+-2.17449652328813719526e-02, -+-2.08233187877915476571e-02, -+-1.98938213844193738378e-02, -+-1.89569691767836438767e-02, -+-1.80132605515005567165e-02, -+-1.70631958701489179486e-02, -+-1.61072772113989640119e-02, -+-1.51460081130329674015e-02, -+-1.41798933139869222375e-02, -+-1.32094384965426719925e-02, -+-1.22351500287977872639e-02, -+-1.12575347075429474386e-02, -+-1.02770995016708190789e-02, -+-9.29435129624720662855e-03, -+-8.30979663736668323903e-03, -+-7.32394147791955510418e-03, -+-6.33729092439597792991e-03, -+-5.35034898484767259402e-03, -+-4.36361831813259892082e-03, -+-3.37759998456233596562e-03, -+-2.39279319807447028376e-03, -+-1.40969508004874419758e-03, -+-4.28800414884481764701e-04, -+ 5.49398592542026499921e-04, -+ 1.52441255742493384819e-03, -+ 2.49575515346705124192e-03, -+ 3.46294334909421361660e-03, -+ 4.42549764133481383921e-03, -+ 5.38294228725484918269e-03, -+ 6.33480553283812409388e-03, -+ 7.28061983920614500670e-03, -+ 8.21992210606954480656e-03, -+ 9.15225389230991427658e-03, -+ 1.00771616335884814375e-02, -+ 1.09941968568804098599e-02, -+ 1.19029163918370119862e-02, -+ 1.28028825788794285712e-02, -+ 1.36936634739278067369e-02, -+ 1.45748330496734655737e-02, -+ 1.54459713933036285605e-02, -+ 1.63066649005877105372e-02, -+ 1.71565064662418664820e-02, -+ 1.79950956704824222010e-02, -+ 1.88220389616893905849e-02, -+ 1.96369498350979915235e-02, -+ 2.04394490074384753420e-02, -+ 2.12291645874509368741e-02, -+ 2.20057322421993752093e-02, -+ 2.27687953591133446229e-02, -+ 2.35180052036899414625e-02, -+ 2.42530210727860510989e-02, -+ 2.49735104434401083973e-02, -+ 2.56791491171582640651e-02, -+ 2.63696213596067048635e-02, -+ 2.70446200356534542653e-02, -+ 2.77038467397033236206e-02, -+ 2.83470119212748915272e-02, -+ 2.89738350057704117935e-02, -+ 2.95840445103900430424e-02, -+ 3.01773781551470283990e-02, -+ 3.07535829689405612597e-02, -+ 3.13124153906489052779e-02, -+ 3.18536413652031544230e-02, -+ 3.23770364346098321606e-02, -+ 3.28823858238901367557e-02, -+ 3.33694845219050725826e-02, -+ 3.38381373570426913222e-02, -+ 3.42881590677418662816e-02, -+ 3.47193743678329280744e-02, -+ 3.51316180066747196786e-02, -+ 3.55247348240743179848e-02, -+ 3.58985797999757036414e-02, -+ 3.62530180989057912444e-02, -+ 3.65879251091717136446e-02, -+ 3.69031864768026920953e-02, -+ 3.71986981342348130286e-02, -+ 3.74743663237384755371e-02, -+ 3.77301076155911810361e-02, -+ 3.79658489210015839821e-02, -+ 3.81815274997910139576e-02, -+ 3.83770909628457501661e-02, -+ 3.85524972693506232102e-02, -+ 3.87077147188212219997e-02, -+ 3.88427219379517477127e-02, -+ 3.89575078623010107037e-02, -+ 3.90520717128378727634e-02, -+ 3.91264229673738417326e-02, -+ 3.91805813269093319851e-02, -+ 3.92145766769267448137e-02, -+ 3.92284490436606639308e-02, -+ 3.92222485453833716318e-02, -+ 3.91960353387427393179e-02, -+ 3.91498795601925853038e-02, -+ 3.90838612625587153437e-02, -+ 3.89980703467861372635e-02, -+ 3.88926064889137598768e-02, -+ 3.87675790623278684888e-02, -+ 3.86231070553441427351e-02, -+ 3.84593189841744911850e-02, -+ 3.82763528013330134314e-02, -+ 3.80743557995419576456e-02, -+ 3.78534845111941978257e-02, -+ 3.76139046034402041441e-02, -+ 3.73557907689583551525e-02, -+ 3.70793266124797640804e-02, -+ 3.67847045331337260676e-02, -+ 3.64721256026843687614e-02, -+ 3.61417994397318920186e-02, -+ 3.57939440799517269443e-02, -+ 3.54287858424472551500e-02, -+ 3.50465591922946295700e-02, -+ 3.46475065993586336943e-02, -+ 3.42318783934602438590e-02, -+ 3.37999326159794388769e-02, -+ 3.33519348679760310739e-02, -+ 3.28881581549163512501e-02, -+ 3.24088827280907126882e-02, -+ 3.19143959228117141125e-02, -+ 3.14049919934835039537e-02, -+ 3.08809719456320137809e-02, -+ 3.03426433649902835277e-02, -+ 2.97903202437320435703e-02, -+ 2.92243228039485228309e-02, -+ 2.86449773184645310742e-02, -+ 2.80526159290918272737e-02, -+ 2.74475764624171579553e-02, -+ 2.68302022432251076334e-02, -+ 2.62008419056547099679e-02, -+ 2.55598492021924458828e-02, -+ 2.49075828106016076979e-02, -+ 2.42444061388931500489e-02, -+ 2.35706871284384854304e-02, -+ 2.28867980553310382263e-02, -+ 2.21931153300989475463e-02, -+ 2.14900192958749729211e-02, -+ 2.07778940251304410081e-02, -+ 2.00571271150767407865e-02, -+ 1.93281094818433703264e-02, -+ 1.85912351535375483524e-02, -+ 1.78469010622939669442e-02, -+ 1.70955068354214992365e-02, -+ 1.63374545857532041393e-02, -+ 1.55731487013095522970e-02, -+ 1.48029956343801779445e-02, -+ 1.40274036901342491479e-02, -+ 1.32467828148644800601e-02, -+ 1.24615443839752523814e-02, -+ 1.16721009898197274068e-02, -+ 1.08788662294939664221e-02, -+ 1.00822544926967554851e-02, -+ 9.28268074975848594965e-03, -+ 8.48056033994836096224e-03, -+ 7.67630876016376067356e-03, -+ 6.87034145410842303492e-03, -+ 6.06307360206417237519e-03, -+ 5.25491991135924960826e-03, -+ 4.44629440763854959229e-03, -+ 3.63761022703795386390e-03, -+ 2.82927940936458007654e-03, -+ 2.02171269238637712692e-03, -+ 1.21531930732854268409e-03, -+ 4.10506775680379075531e-04, -+-3.92319292591773477897e-04, -+-1.19275539932616717227e-03, -+-1.99040035684389668771e-03, -+-2.78485548493010359392e-03, -+-3.57572480602225085608e-03, -+-4.36261523851058825862e-03, -+-5.14513678806150041162e-03, -+-5.92290273686880194143e-03, -+-6.69552983074627079685e-03, -+-7.46263846397084845696e-03, -+-8.22385286178995214557e-03, -+-8.97880126050735853649e-03, -+-9.72711608506233310623e-03, -+-1.04684341240196421979e-02, -+-1.12023967018896625919e-02, -+-1.19286498486973670946e-02, -+-1.26468444667234853479e-02, -+-1.33566364943390990250e-02, -+-1.40576870668614704873e-02, -+-1.47496626743549175825e-02, -+-1.54322353163073335003e-02, -+-1.61050826531120676310e-02, -+-1.67678881542855998110e-02, -+-1.74203412433571909468e-02, -+-1.80621374393645714451e-02, -+-1.86929784948938332301e-02, -+-1.93125725306022809347e-02, -+-1.99206341661660978060e-02, -+-2.05168846475965727105e-02, -+-2.11010519708690891250e-02, -+-2.16728710018125117487e-02, -+-2.22320835922093923420e-02, -+-2.27784386920556920775e-02, -+-2.33116924579366280312e-02, -+-2.38316083574713066806e-02, -+-2.43379572697852361585e-02, -+-2.48305175819705514773e-02, -+-2.53090752814938702020e-02, -+-2.57734240445178890144e-02, -+-2.62233653201022591517e-02, -+-2.66587084102499136118e-02, -+-2.70792705457725754736e-02, -+-2.74848769579453880429e-02, -+-2.78753609459266790682e-02, -+-2.82505639399193153594e-02, -+-2.86103355600531468472e-02, -+-2.89545336709700236455e-02, -+-2.92830244320940215330e-02, -+-2.95956823435738237971e-02, -+-2.98923902878850261677e-02, -+-3.01730395670819218079e-02, -+-3.04375299356923270655e-02, -+-3.06857696292481205158e-02, -+-3.09176753884519220361e-02, -+-3.11331724789744579418e-02, -+-3.13321947068878961518e-02, -+-3.15146844297364905896e-02, -+-3.16805925632501414468e-02, -+-3.18298785837100445262e-02, -+-3.19625105259753808373e-02, -+-3.20784649771835711496e-02, -+-3.21777270661380843109e-02, -+-3.22602904484012090180e-02, -+-3.23261572871092819903e-02, -+-3.23753382295313973938e-02, -+-3.24078523793953007792e-02, -+-3.24237272650036850719e-02, -+-3.24229988031694352224e-02, -+-3.24057112589975146455e-02, -+-3.23719172015455164404e-02, -+-3.23216774553950619842e-02, -+-3.22550610481695601561e-02, -+-3.21721451540349229203e-02, -+-3.20730150332222269105e-02, -+-3.19577639676131355917e-02, -+-3.18264931924307492572e-02, -+-3.16793118240798893259e-02, -+-3.15163367841841124406e-02, -+-3.13376927198667984409e-02, -+-3.11435119203261716325e-02, -+-3.09339342297566856355e-02, -+-3.07091069566692957682e-02, -+-3.04691847796660503223e-02, -+-3.02143296497258302680e-02, -+-2.99447106890591077666e-02, -+-2.96605040865920502324e-02, -+-2.93618929901409558836e-02, -+-2.90490673953408620744e-02, -+-2.87222240313914564669e-02, -+-2.83815662436870431995e-02, -+-2.80273038733983362314e-02, -+-2.76596531340728875314e-02, -+-2.72788364853265505316e-02, -+-2.68850825036951179836e-02, -+-2.64786257507202589523e-02, -+-2.60597066383420963853e-02, -+-2.56285712916748155410e-02, -+-2.51854714092403474124e-02, -+-2.47306641207374125480e-02, -+-2.42644118424243347698e-02, -+-2.37869821301946587910e-02, -+-2.32986475304263404573e-02, -+-2.27996854286841091342e-02, -+-2.22903778963591883699e-02, -+-2.17710115353269804961e-02, -+-2.12418773207074841614e-02, -+-2.07032704418132450230e-02, -+-2.01554901413684046940e-02, -+-1.95988395530860316784e-02, -+-1.90336255376889230961e-02, -+-1.84601585174617617569e-02, -+-1.78787523094215382302e-02, -+-1.72897239571940322667e-02, -+-1.66933935616846752803e-02, -+-1.60900841106333160335e-02, -+-1.54801213071404045879e-02, -+-1.48638333972560768986e-02, -+-1.42415509967192804169e-02, -+-1.36136069169392123768e-02, -+-1.29803359903072849241e-02, -+-1.23420748949298001579e-02, -+-1.16991619788734471652e-02, -+-1.10519370840110493781e-02, -+-1.04007413695592701441e-02, -+-9.74591713539885336204e-03, -+-9.08780764526554395155e-03, -+-8.42675694990374125892e-03, -+-7.76310971027038485004e-03, -+-7.09721102088000169172e-03, -+-6.42940623337920000302e-03, -+-5.76004078043931225933e-03, -+-5.08946000005612835676e-03, -+-4.41800896034429992076e-03, -+-3.74603228491338785533e-03, -+-3.07387397891339432532e-03, -+-2.40187725583507205585e-03, -+-1.73038436515272897598e-03, -+-1.05973642089167863906e-03, -+-3.90273231208217510901e-04, -+ 2.77666870936983212030e-04, -+ 9.43747195927376416637e-04, -+ 1.60763286437934816049e-03, -+ 2.26899097268967123858e-03, -+ 2.92749075716241266912e-03, -+ 3.58280375663248612170e-03, -+ 4.23460397351204959754e-03, -+ 4.88256803317746110316e-03, -+ 5.52637534162357668688e-03, -+ 6.16570824130805751617e-03, -+ 6.80025216511182754170e-03, -+ 7.42969578834302112058e-03, -+ 8.05373117871052007777e-03, -+ 8.67205394419879975476e-03, -+ 9.28436337877218062498e-03, -+ 9.89036260584076794278e-03, -+ 1.04897587194219873291e-02, -+ 1.10822629229305347903e-02, -+ 1.16675906655330941658e-02, -+ 1.22454617760050857300e-02, -+ 1.28156005940266576326e-02, -+ 1.33777360988594062191e-02, -+ 1.39316020353439252305e-02, -+ 1.44769370371622355803e-02, -+ 1.50134847473070466572e-02, -+ 1.55409939357074259464e-02, -+ 1.60592186139547725421e-02, -+ 1.65679181470810912846e-02, -+ 1.70668573623377166359e-02, -+ 1.75558066549289203129e-02, -+ 1.80345420906532633021e-02, -+ 1.85028455054086320153e-02, -+ 1.89605046015185567387e-02, -+ 1.94073130408384669776e-02, -+ 1.98430705346031681369e-02, -+ 2.02675829299774241943e-02, -+ 2.06806622932754168021e-02, -+ 2.10821269898129222409e-02, -+ 2.14718017603625459244e-02, -+ 2.18495177941796202281e-02, -+ 2.22151127985720682478e-02, -+ 2.25684310649855168762e-02, -+ 2.29093235315810418717e-02, -+ 2.32376478422810298086e-02, -+ 2.35532684022618996056e-02, -+ 2.38560564298757396551e-02, -+ 2.41458900049817716538e-02, -+ 2.44226541136732810955e-02, -+ 2.46862406893853837675e-02, -+ 2.49365486503724774481e-02, -+ 2.51734839335446165809e-02, -+ 2.53969595246556420487e-02, -+ 2.56068954848354853049e-02, -+ 2.58032189734641453915e-02, -+ 2.59858642673822630431e-02, -+ 2.61547727764399259853e-02, -+ 2.63098930553838268598e-02, -+ 2.64511808120856638238e-02, -+ 2.65785989121172516736e-02, -+ 2.66921173796784670651e-02, -+ 2.67917133948867500215e-02, -+ 2.68773712874392570193e-02, -+ 2.69490825266583827746e-02, -+ 2.70068457079358954787e-02, -+ 2.70506665355911626869e-02, -+ 2.70805578021602322281e-02, -+ 2.70965393641366091015e-02, -+ 2.70986381141830531827e-02, -+ 2.70868879498386908034e-02, -+ 2.70613297387449595888e-02, -+ 2.70220112804171637422e-02, -+ 2.69689872645891524916e-02, -+ 2.69023192261612989484e-02, -+ 2.68220754967820745884e-02, -+ 2.67283311530973760606e-02, -+ 2.66211679617003732501e-02, -+ 2.65006743208199592454e-02, -+ 2.63669451987833119988e-02, -+ 2.62200820692939373657e-02, -+ 2.60601928435633990733e-02, -+ 2.58873917993413214800e-02, -+ 2.57017995068857182939e-02, -+ 2.55035427519193710899e-02, -+ 2.52927544556184984159e-02, -+ 2.50695735916821975386e-02, -+ 2.48341451005307974065e-02, -+ 2.45866198006852616775e-02, -+ 2.43271542973778100161e-02, -+ 2.40559108884488212499e-02, -+ 2.37730574675824729569e-02, -+ 2.34787674249385819314e-02, -+ 2.31732195452361150467e-02, -+ 2.28565979033475072391e-02, -+ 2.25290917574611608554e-02, -+ 2.21908954398750551951e-02, -+ 2.18422082454798119344e-02, -+ 2.14832343179954671220e-02, -+ 2.11141825340238932507e-02, -+ 2.07352663849828984521e-02, -+ 2.03467038569848726604e-02, -+ 1.99487173087274823058e-02, -+ 1.95415333474632871291e-02, -+ 1.91253827031149341298e-02, -+ 1.87005001006056471857e-02, -+ 1.82671241304729649324e-02, -+ 1.78254971178373536334e-02, -+ 1.73758649897937239581e-02, -+ 1.69184771412996537432e-02, -+ 1.64535862996303787475e-02, -+ 1.59814483874737844893e-02, -+ 1.55023223847373312068e-02, -+ 1.50164701891417791402e-02, -+ 1.45241564756737676078e-02, -+ 1.40256485549719173145e-02, -+ 1.35212162307227472952e-02, -+ 1.30111316561379447565e-02, -+ 1.24956691895912394563e-02, -+ 1.19751052494878589688e-02, -+ 1.14497181684445926975e-02, -+ 1.09197880468538122134e-02, -+ 1.03855966059087159725e-02, -+ 9.84742704016562143965e-03, -+ 9.30556386971926295659e-03, -+ 8.76029279206604755137e-03, -+ 8.21190053373426452621e-03, -+ 7.66067470175298657897e-03, -+ 7.10690363503945106427e-03, -+ 6.55087625577790554771e-03, -+ 5.99288192086684483317e-03, -+ 5.43321027350959859931e-03, -+ 4.87215109502278989617e-03, -+ 4.30999415693893248719e-03, -+ 3.74702907347534584434e-03, -+ 3.18354515444554302464e-03, -+ 2.61983125868587608809e-03, -+ 2.05617564807023672779e-03, -+ 1.49286584218635853295e-03, -+ 9.30188473745678081825e-04, -+ 3.68429144797911432754e-04, -+-1.92127716177123029819e-04, -+-7.51198996231790326432e-04, -+-1.30850303889562991251e-03, -+-1.86375978403549190029e-03, -+-2.41669090655965632108e-03, -+-2.96701995390177180115e-03, -+-3.51447248221491799144e-03, -+-4.05877619121137057229e-03, -+-4.59966105758124674252e-03, -+-5.13685946692752325171e-03, -+-5.67010634415242211620e-03, -+-6.19913928223347811958e-03, -+-6.72369866932763082107e-03, -+-7.24352781414225668777e-03, -+-7.75837306951438713393e-03, -+-8.26798395413882135363e-03, -+-8.77211327238880053669e-03, -+-9.27051723217174085401e-03, -+-9.76295556076584719607e-03, -+-1.02491916185828580571e-02, -+-1.07289925108050229752e-02, -+-1.12021291968433227976e-02, -+-1.16683765975679858140e-02, -+-1.21275137002619763649e-02, -+-1.25793236612475982372e-02, -+-1.30235939061431136438e-02, -+-1.34601162277011333901e-02, -+-1.38886868811863382206e-02, -+-1.43091066772499612286e-02, -+-1.47211810722588463257e-02, -+-1.51247202560407922184e-02, -+-1.55195392370066180543e-02, -+-1.59054579246123636849e-02, -+-1.62823012091269786472e-02, -+-1.66498990386690776111e-02, -+-1.70080864934834194435e-02, -+-1.73567038574233001302e-02, -+-1.76955966866107171354e-02, -+-1.80246158752456059338e-02, -+-1.83436177185377254084e-02, -+-1.86524639727363474029e-02, -+-1.89510219122339153286e-02, -+-1.92391643837212557300e-02, -+-1.95167698573757708580e-02, -+-1.97837224750605396306e-02, -+-2.00399120955206018480e-02, -+-2.02852343365580237156e-02, -+-2.05195906141726648608e-02, -+-2.07428881786561915279e-02, -+-2.09550401476275363621e-02, -+-2.11559655360012838221e-02, -+-2.13455892828807378137e-02, -+-2.15238422753686667321e-02, -+-2.16906613692930197446e-02, -+-2.18459894068418723767e-02, -+-2.19897752311081634558e-02, -+-2.21219736975437064608e-02, -+-2.22425456823232385595e-02, -+-2.23514580876230314899e-02, -+-2.24486838438175441424e-02, -+-2.25342019086016941143e-02, -+-2.26079972630452222249e-02, -+-2.26700609045897422122e-02, -+-2.27203898369985682337e-02, -+-2.27589870572722542674e-02, -+-2.27858615395436989171e-02, -+-2.28010282159679666947e-02, -+-2.28045079546240481161e-02, -+-2.27963275344472623973e-02, -+-2.27765196172116414497e-02, -+-2.27451227165837051303e-02, -+-2.27021811642711575374e-02, -+-2.26477450732895796426e-02, -+-2.25818702983737081003e-02, -+-2.25046183935598033410e-02, -+-2.24160565669674592681e-02, -+-2.23162576328110422164e-02, -+-2.22052999606712764269e-02, -+-2.20832674220598039472e-02, -+-2.19502493343100429923e-02, -+-2.18063404018299551723e-02, -+-2.16516406547519850434e-02, -+-2.14862553850184781479e-02, -+-2.13102950799411924865e-02, -+-2.11238753532740700103e-02, -+-2.09271168738412970123e-02, -+-2.07201452917621688210e-02, -+-2.05030911623162483137e-02, -+-2.02760898674933312535e-02, -+-2.00392815352738624946e-02, -+-1.97928109566855824075e-02, -+-1.95368275006852568088e-02, -+-1.92714850269127511984e-02, -+-1.89969417963674683247e-02, -+-1.87133603800582019872e-02, -+-1.84209075656767175266e-02, -+-1.81197542623479680712e-02, -+-1.78100754035098000905e-02, -+-1.74920498479764381650e-02, -+-1.71658602792400527548e-02, -+-1.68316931030659776292e-02, -+-1.64897383434381879230e-02, -+-1.61401895369109177336e-02, -+-1.57832436254263346054e-02, -+-1.54191008476533275573e-02, -+-1.50479646289087866384e-02, -+-1.46700414697199573583e-02, -+-1.42855408330877838713e-02, -+-1.38946750305117498053e-02, -+-1.34976591068377456406e-02, -+-1.30947107239892130554e-02, -+-1.26860500436455827383e-02, -+-1.22718996089274719891e-02, -+-1.18524842251538416876e-02, -+-1.14280308397327317466e-02, -+-1.09987684212486756113e-02, -+-1.05649278378112127658e-02, -+-1.01267417347274506223e-02, -+-9.68444441156269923698e-03, -+-9.23827169865409740523e-03, -+-8.78846083313997161746e-03, -+-8.33525033457069991494e-03, -+-7.87887988016375100109e-03, -+-7.41959017977004194749e-03, -+-6.95762285061261864794e-03, -+-6.49322029186454475341e-03, -+-6.02662555912889408988e-03, -+-5.55808223888622741915e-03, -+-5.08783432297227420499e-03, -+-4.61612608315053844776e-03, -+-4.14320194584339666216e-03, -+-3.66930636708468534829e-03, -+-3.19468370775774284862e-03, -+-2.71957810918098006822e-03, -+-2.24423336910424412252e-03, -+-1.76889281817741881794e-03, -+-1.29379919695378617014e-03, -+-8.19194533489142270866e-04, -+-3.45320021597831196877e-04, -+ 1.27584100174339069422e-04, -+ 5.99278668799195350127e-04, -+ 1.06952571617924155171e-03, -+ 1.53808858766556200148e-03, -+ 2.00473205962055367468e-03, -+ 2.46922245597071959855e-03, -+ 2.93132776369034713654e-03, -+ 3.39081774716058033034e-03, -+ 3.84746406134854872921e-03, -+ 4.30104036375060765768e-03, -+ 4.75132242504706578390e-03, -+ 5.19808823841395525878e-03, -+ 5.64111812743960539668e-03, -+ 6.08019485259521982184e-03, -+ 6.51510371620631252576e-03, -+ 6.94563266587837867261e-03, -+ 7.37157239632470640683e-03, -+ 7.79271644955021464130e-03, -+ 8.20886131334327799614e-03, -+ 8.61980651802961989061e-03, -+ 9.02535473144288127867e-03, -+ 9.42531185206835209200e-03, -+ 9.81948710031542437715e-03, -+ 1.02076931078787062901e-02, -+ 1.05897460051441894696e-02, -+ 1.09654655066032842570e-02, -+ 1.13346749942337312461e-02, -+ 1.16972015988115480428e-02, -+ 1.20528762791150233225e-02, -+ 1.24015338989890838706e-02, -+ 1.27430133022312791491e-02, -+ 1.30771573852710050467e-02, -+ 1.34038131676064240644e-02, -+ 1.37228318599705717551e-02, -+ 1.40340689301969769737e-02, -+ 1.43373841667557219703e-02, -+ 1.46326417399349796578e-02, -+ 1.49197102606399897157e-02, -+ 1.51984628367875466287e-02, -+ 1.54687771272712503573e-02, -+ 1.57305353934761547874e-02, -+ 1.59836245483238222065e-02, -+ 1.62279362028255533246e-02, -+ 1.64633667101300000535e-02, -+ 1.66898172070444779369e-02, -+ 1.69071936530182861946e-02, -+ 1.71154068665722303155e-02, -+ 1.73143725591620549487e-02, -+ 1.75040113664655661019e-02, -+ 1.76842488770822502120e-02, -+ 1.78550156586383436397e-02, -+ 1.80162472812886650941e-02, -+ 1.81678843386109678537e-02, -+ 1.83098724658869831117e-02, -+ 1.84421623557678958372e-02, -+ 1.85647097713225045501e-02, -+ 1.86774755564665419227e-02, -+ 1.87804256437758242126e-02, -+ 1.88735310596836944330e-02, -+ 1.89567679270675991388e-02, -+ 1.90301174652290280842e-02, -+ 1.90935659872729333875e-02, -+ 1.91471048948949201796e-02, -+ 1.91907306705839213190e-02, -+ 1.92244448672513647269e-02, -+ 1.92482540952976406701e-02, -+ 1.92621700071291257483e-02, -+ 1.92662092791390723856e-02, -+ 1.92603935911679381709e-02, -+ 1.92447496034597632930e-02, -+ 1.92193089311317975854e-02, -+ 1.91841081161766568997e-02, -+ 1.91391885970173640519e-02, -+ 1.90845966756356746896e-02, -+ 1.90203834822977521646e-02, -+ 1.89466049378990836205e-02, -+ 1.88633217139549183572e-02, -+ 1.87705991902617184974e-02, -+ 1.86685074102564685372e-02, -+ 1.85571210341025014112e-02, -+ 1.84365192895308768750e-02, -+ 1.83067859204682249763e-02, -+ 1.81680091334814851345e-02, -+ 1.80202815420731528306e-02, -+ 1.78637001088602434540e-02, -+ 1.76983660856705124487e-02, -+ 1.75243849515933046435e-02, -+ 1.73418663490196370280e-02, -+ 1.71509240177099529789e-02, -+ 1.69516757269280171627e-02, -+ 1.67442432056789658468e-02, -+ 1.65287520710933055756e-02, -+ 1.63053317549959643495e-02, -+ 1.60741154287042248283e-02, -+ 1.58352399260948337179e-02, -+ 1.55888456649855098451e-02, -+ 1.53350765668743439091e-02, -+ 1.50740799750810755553e-02, -+ 1.48060065713376716456e-02, -+ 1.45310102908721653497e-02, -+ 1.42492482360351419013e-02, -+ 1.39608805885138576031e-02, -+ 1.36660705201842418155e-02, -+ 1.33649841026482960049e-02, -+ 1.30577902155067059053e-02, -+ 1.27446604534163440703e-02, -+ 1.24257690319823609071e-02, -+ 1.21012926925372719250e-02, -+ 1.17714106058561026463e-02, -+ 1.14363042748611334204e-02, -+ 1.10961574363676110377e-02, -+ 1.07511559619219848605e-02, -+ 1.04014877577871447251e-02, -+ 1.00473426641261246589e-02, -+ 9.68891235343915212253e-03, -+ 9.32639022830554151322e-03, -+ 8.95997131848667513476e-03, -+ 8.58985217744295814768e-03, -+ 8.21623077831776238433e-03, -+ 7.83930640944576623275e-03, -+ 7.45927956943647635368e-03, -+ 7.07635186189118064320e-03, -+ 6.69072588980388575225e-03, -+ 6.30260514970595094736e-03, -+ 5.91219392560345287368e-03, -+ 5.51969718276637197341e-03, -+ 5.12532046142244023662e-03, -+ 4.72926977040892190796e-03, -+ 4.33175148083997027526e-03, -+ 3.93297221983980160170e-03, -+ 3.53313876439927251547e-03, -+ 3.13245793540825817960e-03, -+ 2.73113649191582047102e-03, -+ 2.32938102567640907548e-03, -+ 1.92739785602901348045e-03, -+ 1.52539292516795199454e-03, -+ 1.12357169385324685146e-03, -+ 7.22139037616026076630e-04, -+ 3.21299143509566089132e-04, -+-7.87445925439102364842e-05, -+-4.77789667756481134173e-04, -+-8.75634573781077039240e-04, -+-1.27207889726797546831e-03, -+-1.66692341962379432171e-03, -+-2.05997021592245954311e-03, -+-2.45102275292159678052e-03, -+-2.83988598613405971924e-03, -+-3.22636645590845556192e-03, -+-3.61027238247302534671e-03, -+-3.99141375989387706819e-03, -+-4.36960244890573310667e-03, -+-4.74465226856734742511e-03, -+-5.11637908669945132983e-03, -+-5.48460090906132020916e-03, -+-5.84913796722293360258e-03, -+-6.20981280509260748224e-03, -+-6.56645036405622325310e-03, -+-6.91887806669126605857e-03, -+-7.26692589901343100750e-03, -+-7.61042649121839841903e-03, -+-7.94921519688219710420e-03, -+-8.28313017058056322295e-03, -+-8.61201244389523008771e-03, -+-8.93570599976736823500e-03, -+-9.25405784516927093497e-03, -+-9.56691808205707705515e-03, -+-9.87413997657404438058e-03, -+-1.01755800264738422573e-02, -+-1.04710980267316584175e-02, -+-1.07605571333162300385e-02, -+-1.10438239250919990192e-02, -+-1.13207684638271209587e-02, -+-1.15912643522783440769e-02, -+-1.18551887903295075782e-02, -+-1.21124226291589674048e-02, -+-1.23628504234125462247e-02, -+-1.26063604813613176076e-02, -+-1.28428449130213884893e-02, -+-1.30721996762182875867e-02, -+-1.32943246205750771616e-02, -+-1.35091235294078314266e-02, -+-1.37165041595128135710e-02, -+-1.39163782788270101731e-02, -+-1.41086617019519286464e-02, -+-1.42932743235239592683e-02, -+-1.44701401494216879556e-02, -+-1.46391873257979802936e-02, -+-1.48003481659278162547e-02, -+-1.49535591748633858722e-02, -+-1.50987610718883325661e-02, -+-1.52358988107658115813e-02, -+-1.53649215977745036421e-02, -+-1.54857829075290397841e-02, -+-1.55984404965814546506e-02, -+-1.57028564148030853886e-02, -+-1.57989970145448431482e-02, -+-1.58868329575775346640e-02, -+-1.59663392198137396583e-02, -+-1.60374950938135772682e-02, -+-1.61002841890790400481e-02, -+-1.61546944301414231726e-02, -+-1.62007180524483263007e-02, -+-1.62383515960572676062e-02, -+-1.62675958971449409474e-02, -+-1.62884560773407099932e-02, -+-1.63009415308956705226e-02, -+-1.63050659096987474173e-02, -+-1.63008471061523926848e-02, -+-1.62883072339218455682e-02, -+-1.62674726065730329561e-02, -+-1.62383737141145109706e-02, -+-1.62010451974609233361e-02, -+-1.61555258208356707084e-02, -+-1.61018584421316855726e-02, -+-1.60400899812505326469e-02, -+-1.59702713864408145372e-02, -+-1.58924575986573272945e-02, -+-1.58067075139647107707e-02, -+-1.57130839440085059988e-02, -+-1.56116535745792449352e-02, -+-1.55024869222944727820e-02, -+-1.53856582894260490724e-02, -+-1.52612457168996174667e-02, -+-1.51293309354949591372e-02, -+-1.49899993152762481957e-02, -+-1.48433398132821487564e-02, -+-1.46894449195070758013e-02, -+-1.45284106012046419082e-02, -+-1.43603362455460986657e-02, -+-1.41853246006673119201e-02, -+-1.40034817151370259009e-02, -+-1.38149168758828280734e-02, -+-1.36197425446084856987e-02, -+-1.34180742927401692316e-02, -+-1.32100307349369578552e-02, -+-1.29957334612042334221e-02, -+-1.27753069676474068084e-02, -+-1.25488785859041301896e-02, -+-1.23165784112953900081e-02, -+-1.20785392297338319001e-02, -+-1.18348964434312736022e-02, -+-1.15857879954438421077e-02, -+-1.13313542930994892027e-02, -+-1.10717381303457890890e-02, -+-1.08070846090634192782e-02, -+-1.05375410593865573988e-02, -+-1.02632569590727744380e-02, -+-9.98438385196800254340e-03, -+-9.70107526560752726763e-03, -+-9.41348662799971515336e-03, -+-9.12177518363594015682e-03, -+-8.82609990877025046840e-03, -+-8.52662142601712247370e-03, -+-8.22350191830830204442e-03, -+-7.91690504225831676033e-03, -+-7.60699584098104789748e-03, -+-7.29394065640553979080e-03, -+-6.97790704113636535422e-03, -+-6.65906366990342071799e-03, -+-6.33758025065010895116e-03, -+-6.01362743530314651508e-03, -+-5.68737673027295675271e-03, -+-5.35900040672940281006e-03, -+-5.02867141070039921913e-03, -+-4.69656327303835750137e-03, -+-4.36285001930248206997e-03, -+-4.02770607960259777180e-03, -+-3.69130619844926536818e-03, -+-3.35382534465939949331e-03, -+-3.01543862135967731183e-03, -+-2.67632117613655082580e-03, -+-2.33664811137678819775e-03, -+-1.99659439484433081508e-03, -+-1.65633477053923894307e-03, -+-1.31604366988200688349e-03, -+-9.75895123270567642695e-04, -+-6.36062672051197525343e-04, -+-2.96719280950014205507e-04, -+ 4.19627489923029214371e-05, -+ 3.79811866940293777015e-04, -+ 7.16657358192283769176e-04, -+ 1.05232942947910620979e-03, -+ 1.38665929358586822832e-03, -+ 1.71947925326047606175e-03, -+ 2.05062278436349190031e-03, -+ 2.37992461822022008389e-03, -+ 2.70722082313579063065e-03, -+ 3.03234888503091078518e-03, -+ 3.35514778716229861502e-03, -+ 3.67545808888595972735e-03, -+ 3.99312200342836869094e-03, -+ 4.30798347462560838467e-03, -+ 4.61988825259515914490e-03, -+ 4.92868396830371639783e-03, -+ 5.23422020699498662111e-03, -+ 5.53634858044424124635e-03, -+ 5.83492279800282634405e-03, -+ 6.12979873640210736613e-03, -+ 6.42083450828168002950e-03, -+ 6.70789052941064140034e-03, -+ 6.99082958457222531506e-03, -+ 7.26951689207744420479e-03, -+ 7.54382016688265842619e-03, -+ 7.81360968227803008579e-03, -+ 8.07875833012169572434e-03, -+ 8.33914167959036965738e-03, -+ 8.59463803442023742407e-03, -+ 8.84512848861381158205e-03, -+ 9.09049698058539933088e-03, -+ 9.33063034572383098730e-03, -+ 9.56541836734724204572e-03, -+ 9.79475382602876601390e-03, -+ 1.00185325472712388750e-02, -+ 1.02366534475112885144e-02, -+ 1.04490185784319629392e-02, -+ 1.06555331695659429025e-02, -+ 1.08561056691723126222e-02, -+ 1.10506477833681605177e-02, -+ 1.12390745135014444300e-02, -+ 1.14213041917481192972e-02, -+ 1.15972585149209383992e-02, -+ 1.17668625764762845715e-02, -+ 1.19300448967066957673e-02, -+ 1.20867374511089888806e-02, -+ 1.22368756969161197878e-02, -+ 1.23803985977854972417e-02, -+ 1.25172486466337395256e-02, -+ 1.26473718866117884607e-02, -+ 1.27707179302137523863e-02, -+ 1.28872399765134221933e-02, -+ 1.29968948265256969976e-02, -+ 1.30996428966874464001e-02, -+ 1.31954482304573617740e-02, -+ 1.32842785080317399987e-02, -+ 1.33661050541768675060e-02, -+ 1.34409028441777739227e-02, -+ 1.35086505079049911532e-02, -+ 1.35693303320018558017e-02, -+ 1.36229282601955156012e-02, -+ 1.36694338917359037994e-02, -+ 1.37088404779683696588e-02, -+ 1.37411449170452750618e-02, -+ 1.37663477467847624597e-02, -+ 1.37844531356839973546e-02, -+ 1.37954688720959822018e-02, -+ 1.37994063515802581343e-02, -+ 1.37962805624378334612e-02, -+ 1.37861100694423310831e-02, -+ 1.37689169957797372806e-02, -+ 1.37447270032107649734e-02, -+ 1.37135692704694871907e-02, -+ 1.36754764699141325573e-02, -+ 1.36304847424457160204e-02, -+ 1.35786336707117930717e-02, -+ 1.35199662506130090928e-02, -+ 1.34545288611307815863e-02, -+ 1.33823712324960784892e-02, -+ 1.33035464127193650552e-02, -+ 1.32181107325021699600e-02, -+ 1.31261237685532539815e-02, -+ 1.30276483053305639631e-02, -+ 1.29227502952338896280e-02, -+ 1.28114988172704970942e-02, -+ 1.26939660342200184157e-02, -+ 1.25702271483237072724e-02, -+ 1.24403603555233947114e-02, -+ 1.23044467982784695020e-02, -+ 1.21625705169872422307e-02, -+ 1.20148184000413785211e-02, -+ 1.18612801325425308574e-02, -+ 1.17020481437095178606e-02, -+ 1.15372175530077808459e-02, -+ 1.13668861150298707019e-02, -+ 1.11911541631600167795e-02, -+ 1.10101245520525005406e-02, -+ 1.08239025989581676146e-02, -+ 1.06325960239305756377e-02, -+ 1.04363148889449076223e-02, -+ 1.02351715359647547215e-02, -+ 1.00292805239893083324e-02, -+ 9.81875856511689806827e-03, -+ 9.60372445965929077971e-03, -+ 9.38429903034274093265e-03, -+ 9.16060505563077998037e-03, -+ 8.93276720220602567235e-03, -+ 8.70091195664717161062e-03, -+ 8.46516755633743532561e-03, -+ 8.22566391964303297857e-03, -+ 7.98253257539762242634e-03, -+ 7.73590659173173638558e-03, -+ 7.48592050428459592631e-03, -+ 7.23271024383650030370e-03, -+ 6.97641306340083741655e-03, -+ 6.71716746481300884530e-03, -+ 6.45511312485713174836e-03, -+ 6.19039082096706390346e-03, -+ 5.92314235654277116555e-03, -+ 5.65351048592053172237e-03, -+ 5.38163883903518876911e-03, -+ 5.10767184581618297751e-03, -+ 4.83175466035329001513e-03, -+ 4.55403308487579983055e-03, -+ 4.27465349357983477596e-03, -+ 3.99376275634679561710e-03, -+ 3.71150816239089074641e-03, -+ 3.42803734387406560530e-03, -+ 3.14349819952992014238e-03, -+ 2.85803881833283880340e-03, -+ 2.57180740325433027441e-03, -+ 2.28495219514192630592e-03, -+ 1.99762139676367333693e-03, -+ 1.70996309705198873234e-03, -+ 1.42212519558894585903e-03, -+ 1.13425532736955879051e-03, -+ 8.46500787880119249379e-04, -+ 5.59008458531536360676e-04, -+ 2.71924732482213711831e-04, -+-1.46045591101362367902e-05, -+-3.00434220371862336588e-04, -+-5.85419763496916080447e-04, -+-8.69417480990889736912e-04, -+-1.15228451734444565895e-03, -+-1.43387894009652252202e-03, -+-1.71405981025574941264e-03, -+-1.99268725204318009406e-03, -+-2.26962252192313383714e-03, -+-2.54472807688939806764e-03, -+-2.81786764197139655633e-03, -+-3.08890627693018818625e-03, -+-3.35771044210986593925e-03, -+-3.62414806341412312415e-03, -+-3.88808859637569193338e-03, -+-4.14940308928948755479e-03, -+-4.40796424537761438733e-03, -+-4.66364648395760274940e-03, -+-4.91632600058568031837e-03, -+-5.16588082614466512915e-03, -+-5.41219088485122776233e-03, -+-5.65513805115323408418e-03, -+-5.89460620549208617197e-03, -+-6.13048128890366673949e-03, -+-6.36265135643233371854e-03, -+-6.59100662933489230694e-03, -+-6.81543954604840913902e-03, -+-7.03584481190112302068e-03, -+-7.25211944754226237736e-03, -+-7.46416283606952078722e-03, -+-7.67187676883409296058e-03, -+-7.87516548990104849060e-03, -+-8.07393573914804915659e-03, -+-8.26809679398036317943e-03, -+-8.45756050964779383661e-03, -+-8.64224135814309693537e-03, -+-8.82205646566693382771e-03, -+-8.99692564864382551826e-03, -+-9.16677144827266789096e-03, -+-9.33151916359954529401e-03, -+-9.49109688309758385560e-03, -+-9.64543551474287760850e-03, -+-9.79446881457346311961e-03, -+-9.93813341372091867132e-03, -+-1.00763688439045248635e-02, -+-1.02091175613780275888e-02, -+-1.03363249693213758024e-02, -+-1.04579394386685748525e-02, -+-1.05739123273658041507e-02, -+-1.06841979980529435540e-02, -+-1.07887538341634794947e-02, -+-1.08875402544387003823e-02, -+-1.09805207258518982422e-02, -+-1.10676617749403266577e-02, -+-1.11489329975425002783e-02, -+-1.12243070669403085388e-02, -+-1.12937597404047310179e-02, -+-1.13572698641464103764e-02, -+-1.14148193766721185033e-02, -+-1.14663933105489043718e-02, -+-1.15119797925795526450e-02, -+-1.15515700423923072665e-02, -+-1.15851583694501700239e-02, -+-1.16127421684842080385e-02, -+-1.16343219133579756086e-02, -+-1.16499011493693144931e-02, -+-1.16594864839973874626e-02, -+-1.16630875761035632254e-02, -+-1.16607171235953484961e-02, -+-1.16523908495632707444e-02, -+-1.16381274869015692575e-02, -+-1.16179487614245235960e-02, -+-1.15918793734899987224e-02, -+-1.15599469781440481603e-02, -+-1.15221821637996792859e-02, -+-1.14786184294645918214e-02, -+-1.14292921605328150897e-02, -+-1.13742426031563578781e-02, -+-1.13135118372134652748e-02, -+-1.12471447478901080685e-02, -+-1.11751889958936409530e-02, -+-1.10976949863161849369e-02, -+-1.10147158361676694022e-02, -+-1.09263073405979870001e-02, -+-1.08325279378290572491e-02, -+-1.07334386728172945930e-02, -+-1.06291031596689976302e-02, -+-1.05195875428303799864e-02, -+-1.04049604570749746474e-02, -+-1.02852929863124966520e-02, -+-1.01606586212423712773e-02, -+-1.00311332158768314049e-02, -+-9.89679494295862653697e-03, -+-9.75772424829860450524e-03, -+-9.61400380405963254915e-03, -+-9.46571846101251432315e-03, -+-9.31295519979207127303e-03, -+-9.15580308117954107250e-03, -+-8.99435319544003054892e-03, -+-8.82869861074311521043e-03, -+-8.65893432069447625821e-03, -+-8.48515719100898131722e-03, -+-8.30746590535331487504e-03, -+-8.12596091038898099557e-03, -+-7.94074436004471931327e-03, -+-7.75192005904976402797e-03, -+-7.55959340575841978738e-03, -+-7.36387133429604930773e-03, -+-7.16486225605968488073e-03, -+-6.96267600060247564275e-03, -+-6.75742375593618195551e-03, -+-6.54921800828115602267e-03, -+-6.33817248129906873205e-03, -+-6.12440207483747056649e-03, -+-5.90802280322155672770e-03, -+-5.68915173312445864029e-03, -+-5.46790692104878739421e-03, -+-5.24440735045367430189e-03, -+-5.01877286855873742250e-03, -+-4.79112412285956183744e-03, -+-4.56158249738753112518e-03, -+-4.33027004874617267582e-03, -+-4.09730944195998200014e-03, -+-3.86282388616571940171e-03, -+-3.62693707018273397286e-03, -+-3.38977309799298612628e-03, -+-3.15145642416600349836e-03, -+-2.91211178926129628936e-03, -+-2.67186415524058896998e-03, -+-2.43083864092491410552e-03, -+-2.18916045752724818321e-03, -+-1.94695484429555434880e-03, -+-1.70434700429766003774e-03, -+-1.46146204038146722802e-03, -+-1.21842489134170429109e-03, -+-9.75360268326885652967e-04, -+-7.32392591517812274748e-04, -+-4.89645927108687487733e-04, -+-2.47243924624317883750e-04, -+-5.30975460243512911756e-06, -+ 2.36033953325794955153e-04, -+ 4.76665171927515821017e-04, -+ 7.16462537401301477295e-04, -+ 9.55305409921098193718e-04, -+ 1.19307393366231218393e-03, -+ 1.42964909627860559810e-03, -+ 1.66491278780242935725e-03, -+ 1.89874785893865663695e-03, -+ 2.13103817872366176761e-03, -+ 2.36166869152246855501e-03, -+ 2.59052547333455795292e-03, -+ 2.81749578738373649203e-03, -+ 3.04246813896196085722e-03, -+ 3.26533232950441303435e-03, -+ 3.48597950986718595895e-03, -+ 3.70430223278326144556e-03, -+ 3.92019450447253243325e-03, -+ 4.13355183537975935659e-03, -+ 4.34427129001856843216e-03, -+ 4.55225153589615232075e-03, -+ 4.75739289149763357190e-03, -+ 4.95959737330627960239e-03, -+ 5.15876874183868530666e-03, -+ 5.35481254667346043274e-03, -+ 5.54763617045254779636e-03, -+ 5.73714887183583450297e-03, -+ 5.92326182738835572278e-03, -+ 6.10588817238264490450e-03, -+ 6.28494304049680499458e-03, -+ 6.46034360239086408867e-03, -+ 6.63200910314530080181e-03, -+ 6.79986089854376415248e-03, -+ 6.96382249018552904052e-03, -+ 7.12381955941148153205e-03, -+ 7.27978000003043010380e-03, -+ 7.43163394983032809388e-03, -+ 7.57931382086227036637e-03, -+ 7.72275432848473775138e-03, -+ 7.86189251915526618464e-03, -+ 7.99666779695973849174e-03, -+ 8.12702194886731447976e-03, -+ 8.25289916870263103033e-03, -+ 8.37424607982448221399e-03, -+ 8.49101175650416456486e-03, -+ 8.60314774399449817832e-03, -+ 8.71060807728277902706e-03, -+ 8.81334929852170718967e-03, -+ 8.91133047313173894122e-03, -+ 9.00451320457064906255e-03, -+ 9.09286164776551726618e-03, -+ 9.17634252120343510417e-03, -+ 9.25492511767886209817e-03, -+ 9.32858131369380602638e-03, -+ 9.39728557751129400799e-03, -+ 9.46101497585938137902e-03, -+ 9.51974917928707746462e-03, -+ 9.57347046617182048656e-03, -+ 9.62216372537993622216e-03, -+ 9.66581645758253331369e-03, -+ 9.70441877522852311411e-03, -+ 9.73796340117899505984e-03, -+ 9.76644566600631813813e-03, -+ 9.78986350396279965402e-03, -+ 9.80821744762437608411e-03, -+ 9.82151062121512652414e-03, -+ 9.82974873261935853941e-03, -+ 9.83294006408857654278e-03, -+ 9.83109546165142171581e-03, -+ 9.82422832323481126648e-03, -+ 9.81235458550605912920e-03, -+ 9.79549270944552429030e-03, -+ 9.77366366466025406068e-03, -+ 9.74689091245018769671e-03, -+ 9.71520038763806249860e-03, -+ 9.67862047917591658552e-03, -+ 9.63718200954081366527e-03, -+ 9.59091821293355135947e-03, -+ 9.53986471229417709594e-03, -+ 9.48405949514947999024e-03, -+ 9.42354288830722815196e-03, -+ 9.35835753141333638594e-03, -+ 9.28854834938808680833e-03, -+ 9.21416252375845123979e-03, -+ 9.13524946290390424397e-03, -+ 9.05186077123359793262e-03, -+ 8.96405021731353467140e-03, -+ 8.87187370096227494176e-03, -+ 8.77538921933519559804e-03, -+ 8.67465683201655221590e-03, -+ 8.56973862514041548333e-03, -+ 8.46069867456020023588e-03, -+ 8.34760300808964732233e-03, -+ 8.23051956683512782320e-03, -+ 8.10951816564266063370e-03, -+ 7.98467045268167613381e-03, -+ 7.85604986818807735083e-03, -+ 7.72373160239066269828e-03, -+ 7.58779255264339144021e-03, -+ 7.44831127978854735938e-03, -+ 7.30536796377457674917e-03, -+ 7.15904435855267175237e-03, -+ 7.00942374627864812214e-03, -+ 6.85659089084312764473e-03, -+ 6.70063199075772355368e-03, -+ 6.54163463142106230142e-03, -+ 6.37968773679228450674e-03, -+ 6.21488152049734249999e-03, -+ 6.04730743639451170240e-03, -+ 5.87705812862679335268e-03, -+ 5.70422738118673677138e-03, -+ 5.52891006702203955531e-03, -+ 5.35120209670836722432e-03, -+ 5.17120036671731789918e-03, -+ 4.98900270730638639716e-03, -+ 4.80470783005945180355e-03, -+ 4.61841527510534633622e-03, -+ 4.43022535804147177957e-03, -+ 4.24023911659228945614e-03, -+ 4.04855825702851463560e-03, -+ 3.85528510037712974709e-03, -+ 3.66052252844891639130e-03, -+ 3.46437392971235937414e-03, -+ 3.26694314504209770700e-03, -+ 3.06833441336932816884e-03, -+ 2.86865231726372458751e-03, -+ 2.66800172847322068781e-03, -+ 2.46648775345124351629e-03, -+ 2.26421567889880867575e-03, -+ 2.06129091734864790947e-03, -+ 1.85781895282100093132e-03, -+ 1.65390528657631021014e-03, -+ 1.44965538299551312262e-03, -+ 1.24517461561208316219e-03, -+ 1.04056821332572727035e-03, -+ 8.35941206823879187984e-04, -+ 6.31398375237409098873e-04, -+ 4.27044193058938911355e-04, -+ 2.22982777348387794809e-04, -+ 1.93178352541883997372e-05, -+-1.83847388125652280721e-04, -+-3.86410161515063485180e-04, -+-5.88268318839344113436e-04, -+-7.89320310186791547317e-04, -+-9.89465252327087745748e-04, -+-1.18860297876262669368e-03, -+-1.38663408928657127910e-03, -+-1.58345999902536368857e-03, -+-1.77898298694016492559e-03, -+-1.97310624376432260790e-03, -+-2.16573391935423681734e-03, -+-2.35677116942951958567e-03, -+-2.54612420168103805937e-03, -+-2.73370032122395708804e-03, -+-2.91940797537506343401e-03, -+-3.10315679773186291548e-03, -+-3.28485765153320842871e-03, -+-3.46442267228143797181e-03, -+-3.64176530960461748362e-03, -+-3.81680036834099439130e-03, -+-3.98944404882473329516e-03, -+-4.15961398635617159159e-03, -+-4.32722928983605027026e-03, -+-4.49221057954843436960e-03, -+-4.65448002407309498196e-03, -+-4.81396137631140419444e-03, -+-4.97058000860978871360e-03, -+-5.12426294696375662918e-03, -+-5.27493890428890055411e-03, -+-5.42253831274242328875e-03, -+-5.56699335508204027484e-03, -+-5.70823799504863171883e-03, -+-5.84620800675817245406e-03, -+-5.98084100309233864662e-03, -+-6.11207646307366722627e-03, -+-6.23985575821544256880e-03, -+-6.36412217783412659938e-03, -+-6.48482095331432296242e-03, -+-6.60189928131710984660e-03, -+-6.71530634592089337165e-03, -+-6.82499333968801785016e-03, -+-6.93091348364723199016e-03, -+-7.03302204618568189975e-03, -+-7.13127636084264718980e-03, -+-7.22563584299942916062e-03, -+-7.31606200545875488828e-03, -+-7.40251847290886687281e-03, -+-7.48497099526800394043e-03, -+-7.56338745990427392674e-03, -+-7.63773790272863697948e-03, -+-7.70799451815705905650e-03, -+-7.77413166794023880596e-03, -+-7.83612588885893024404e-03, -+-7.89395589928373019040e-03, -+-7.94760260459900953756e-03, -+-7.99704910149071600267e-03, -+-8.04228068109907878735e-03, -+-8.08328483103710852820e-03, -+-8.12005123627678772336e-03, -+-8.15257177890556759825e-03, -+-8.18084053675576655662e-03, -+-8.20485378091061375028e-03, -+-8.22460997209095365235e-03, -+-8.24010975592739773610e-03, -+-8.25135595712299906024e-03, -+-8.25835357251225588016e-03, -+-8.26110976302289051754e-03, -+-8.25963384454711686822e-03, -+-8.25393727773001892323e-03, -+-8.24403365668276502665e-03, -+-8.22993869662941301968e-03, -+-8.21167022049609611478e-03, -+-8.18924814445231435966e-03, -+-8.16269446241428900390e-03, -+-8.13203322952094770359e-03, -+-8.09729054459370524433e-03, -+-8.05849453159142650738e-03, -+-8.01567532007289515472e-03, -+-7.96886502467894497492e-03, -+-7.91809772364769626218e-03, -+-7.86340943637591806292e-03, -+-7.80483810004095092394e-03, -+-7.74242354529683460967e-03, -+-7.67620747106049876318e-03, -+-7.60623341840202440295e-03, -+-7.53254674355573021483e-03, -+-7.45519459006761028158e-03, -+-7.37422586009548602926e-03, -+-7.28969118487934625988e-03, -+-7.20164289439836468459e-03, -+-7.11013498623295006618e-03, -+-7.01522309364934187198e-03, -+-6.91696445292533119292e-03, -+-6.81541786993564071423e-03, -+-6.71064368601629723105e-03, -+-6.60270374312706912617e-03, -+-6.49166134833155817480e-03, -+-6.37758123761547179170e-03, -+-6.26052953906250375660e-03, -+-6.14057373540916311833e-03, -+-6.01778262599883193018e-03, -+-5.89222628815630304622e-03, -+-5.76397603800424263021e-03, -+-5.63310439074257793962e-03, -+-5.49968502041355174204e-03, -+-5.36379271917321667762e-03, -+-5.22550335609255588165e-03, -+-5.08489383551021401769e-03, -+-4.94204205495888618943e-03, -+-4.79702686268924927138e-03, -+-4.64992801481256979451e-03, -+-4.50082613208717050024e-03, -+-4.34980265636943953800e-03, -+-4.19693980675457916502e-03, -+-4.04232053542952999431e-03, -+-3.88602848326117904232e-03, -+-3.72814793514442046479e-03, -+-3.56876377513224178270e-03, -+-3.40796144137293617951e-03, -+-3.24582688087653560907e-03, -+-3.08244650413554361137e-03, -+-2.91790713962266495818e-03, -+-2.75229598818970896956e-03, -+-2.58570057739144132034e-03, -+-2.41820871575722370558e-03, -+-2.24990844703554021197e-03, -+-2.08088800443330694187e-03, -+-1.91123576487488202463e-03, -+-1.74104020330362123901e-03, -+-1.57038984704899425675e-03, -+-1.39937323028345179249e-03, -+-1.22807884859140337835e-03, -+-1.05659511367403743075e-03, -+-8.85010308212021861753e-04, -+-7.13412540909905373669e-04, -+-5.41889701744388552207e-04, -+-3.70529417438410636591e-04, -+-1.99419007184688332895e-04, -+-2.86454386391723757354e-05, -+ 1.41704715791932274720e-04, -+ 3.11545322351527997646e-04, -+ 4.80790728994517078173e-04, -+ 6.49355808093498481151e-04, -+ 8.17155998766742235409e-04, -+ 9.84107348806230984584e-04, -+ 1.15012655618750773805e-03, -+ 1.31513101013778751017e-03, -+ 1.47903883174614527579e-03, -+ 1.64176891409281364154e-03, -+ 1.80324096188044400921e-03, -+ 1.96337553054683720821e-03, -+ 2.12209406484084378217e-03, -+ 2.27931893684354004020e-03, -+ 2.43497348341521844400e-03, -+ 2.58898204305202080458e-03, -+ 2.74126999213337996242e-03, -+ 2.89176378054382390501e-03, -+ 3.04039096665289229962e-03, -+ 3.18708025163550725742e-03, -+ 3.33176151311842744587e-03, -+ 3.47436583813595005824e-03, -+ 3.61482555538014498075e-03, -+ 3.75307426673132269943e-03, -+ 3.88904687805323055413e-03, -+ 4.02267962924054024026e-03, -+ 4.15391012350339004777e-03, -+ 4.28267735587738347658e-03, -+ 4.40892174094537157153e-03, -+ 4.53258513975950821928e-03, -+ 4.65361088595093140563e-03, -+ 4.77194381101678308937e-03, -+ 4.88753026877269871470e-03, -+ 5.00031815896078389583e-03, -+ 5.11025695000340892532e-03, -+ 5.21729770089245179637e-03, -+ 5.32139308220599526605e-03, -+ 5.42249739624305147206e-03, -+ 5.52056659626851391892e-03, -+ 5.61555830486112211863e-03, -+ 5.70743183135652247528e-03, -+ 5.79614818837954730302e-03, -+ 5.88167010745905063929e-03, -+ 5.96396205371965346109e-03, -+ 6.04299023964566684591e-03, -+ 6.11872263791200451943e-03, -+ 6.19112899327779828834e-03, -+ 6.26018083353982283945e-03, -+ 6.32585147954144774024e-03, -+ 6.38811605423505318724e-03, -+ 6.44695149079576538403e-03, -+ 6.50233653978409681384e-03, -+ 6.55425177535713839039e-03, -+ 6.60267960052677606309e-03, -+ 6.64760425146517907463e-03, -+ 6.68901180085764834188e-03, -+ 6.72689016030344512365e-03, -+ 6.76122908176596693758e-03, -+ 6.79202015807388054941e-03, -+ 6.81925682247539518416e-03, -+ 6.84293434724847406819e-03, -+ 6.86304984136987261678e-03, -+ 6.87960224724697578386e-03, -+ 6.89259233651607575860e-03, -+ 6.90202270491214152359e-03, -+ 6.90789776621477530361e-03, -+ 6.91022374527592089799e-03, -+ 6.90900867013538935724e-03, -+ 6.90426236323048170274e-03, -+ 6.89599643170657299052e-03, -+ 6.88422425683606498820e-03, -+ 6.86896098255334458527e-03, -+ 6.85022350311395231137e-03, -+ 6.82803044988653656810e-03, -+ 6.80240217728674077119e-03, -+ 6.77336074786231978617e-03, -+ 6.74092991653942995994e-03, -+ 6.70513511404041261804e-03, -+ 6.66600342948348283806e-03, -+ 6.62356359217582818522e-03, -+ 6.57784595261113724102e-03, -+ 6.52888246268356915031e-03, -+ 6.47670665513047465189e-03, -+ 6.42135362221612788353e-03, -+ 6.36285999366974046321e-03, -+ 6.30126391389077868121e-03, -+ 6.23660501843537051769e-03, -+ 6.16892440979760654785e-03, -+ 6.09826463250009130623e-03, -+ 6.02466964750847117777e-03, -+ 5.94818480598439686818e-03, -+ 5.86885682239295450313e-03, -+ 5.78673374697901473501e-03, -+ 5.70186493762921998985e-03, -+ 5.61430103113523277375e-03, -+ 5.52409391387439444726e-03, -+ 5.43129669192503241465e-03, -+ 5.33596366063239947036e-03, -+ 5.23815027364322050724e-03, -+ 5.13791311142524926431e-03, -+ 5.03530984929013124274e-03, -+ 4.93039922493699201561e-03, -+ 4.82324100553432541516e-03, -+ 4.71389595435920891187e-03, -+ 4.60242579701116046043e-03, -+ 4.48889318721965805553e-03, -+ 4.37336167226419578885e-03, -+ 4.25589565802507278913e-03, -+ 4.13656037368400047310e-03, -+ 4.01542183609403160321e-03, -+ 3.89254681383765111652e-03, -+ 3.76800279099204432978e-03, -+ 3.64185793062176202395e-03, -+ 3.51418103801726458557e-03, -+ 3.38504152369975422690e-03, -+ 3.25450936621163181353e-03, -+ 3.12265507471182202082e-03, -+ 2.98954965139678783756e-03, -+ 2.85526455376563029209e-03, -+ 2.71987165675057146821e-03, -+ 2.58344321473122102290e-03, -+ 2.44605182345362590079e-03, -+ 2.30777038187338556438e-03, -+ 2.16867205394239955310e-03, -+ 2.02883023036007446166e-03, -+ 1.88831849030696359050e-03, -+ 1.74721056318321156346e-03, -+ 1.60558029036844077814e-03, -+ 1.46350158702526116430e-03, -+ 1.32104840396417614300e-03, -+ 1.17829468959044993299e-03, -+ 1.03531435195189738287e-03, -+ 8.92181220906407453086e-04, -+ 7.48969010429437957559e-04, -+ 6.05751281079198837520e-04, -+ 4.62601402639519420582e-04, -+ 3.19592516958703328628e-04, -+ 1.76797501002548605557e-04, -+ 3.42889301410700559898e-05, -+-1.07860958314116714895e-04, -+-2.49580301302545907224e-04, -+-3.90797645920318444633e-04, -+-5.31441985020897648614e-04, -+-6.71442792492634734323e-04, -+-8.10730058197295030964e-04, -+-9.49234322550691531593e-04, -+-1.08688671073021991820e-03, -+-1.22361896649146595362e-03, -+-1.35936348557852870918e-03, -+-1.49405334871076226656e-03, -+-1.62762235413136985458e-03, -+-1.76000504970118200505e-03, -+-1.89113676452272319942e-03, -+-2.02095364007995759864e-03, -+-2.14939266087792180127e-03, -+-2.27639168456901649570e-03, -+-2.40188947155079574047e-03, -+-2.52582571402181800535e-03, -+-2.64814106448245725756e-03, -+-2.76877716366639818613e-03, -+-2.88767666789123715262e-03, -+-3.00478327581455654377e-03, -+-3.12004175458374362687e-03, -+-3.23339796536792432186e-03, -+-3.34479888826014811615e-03, -+-3.45419264653828387429e-03, -+-3.56152853027508903283e-03, -+-3.66675701928568381627e-03, -+-3.76982980540296712391e-03, -+-3.87069981407154629915e-03, -+-3.96932122525004045521e-03, -+-4.06564949361390860078e-03, -+-4.15964136804923296370e-03, -+-4.25125491042980478001e-03, -+-4.34044951367000032827e-03, -+-4.42718591904522635466e-03, -+-4.51142623277396223602e-03, -+-4.59313394185401763226e-03, -+-4.67227392914710930316e-03, -+-4.74881248770633347667e-03, -+-4.82271733434034600985e-03, -+-4.89395762241020149813e-03, -+-4.96250395385362200878e-03, -+-5.02832839043272725871e-03, -+-5.09140446420189209803e-03, -+-5.15170718719160612709e-03, -+-5.20921306030622689037e-03, -+-5.26390008143260215712e-03, -+-5.31574775275780748302e-03, -+-5.36473708729396422251e-03, -+-5.41085061460937211120e-03, -+-5.45407238576448103601e-03, -+-5.49438797745297521219e-03, -+-5.53178449534730623527e-03, -+-5.56625057664943048014e-03, -+-5.59777639184752800333e-03, -+-5.62635364567968653676e-03, -+-5.65197557730641106377e-03, -+-5.67463695969378130457e-03, -+-5.69433409820978980731e-03, -+-5.71106482843655206827e-03, -+-5.72482851320176878984e-03, -+-5.73562603883285941631e-03, -+-5.74345981063785135379e-03, -+-5.74833374761739290815e-03, -+-5.75025327641265435880e-03, -+-5.74922532449426235829e-03, -+-5.74525831259774157761e-03, -+-5.73836214641150563903e-03, -+-5.72854820752343851104e-03, -+-5.71582934363289423690e-03, -+-5.70021985803501312490e-03, -+-5.68173549838472177059e-03, -+-5.66039344474815377811e-03, -+-5.63621229694941539706e-03, -+-5.60921206122125953764e-03, -+-5.57941413616825417771e-03, -+-5.54684129805165914567e-03, -+-5.51151768540501883070e-03, -+-5.47346878299080803754e-03, -+-5.43272140510751410519e-03, -+-5.38930367825777700136e-03, -+-5.34324502318837303572e-03, -+-5.29457613631248175806e-03, -+-5.24332897052591333231e-03, -+-5.18953671542863627375e-03, -+-5.13323377696330972880e-03, -+-5.07445575648276473585e-03, -+-5.01323942925907713175e-03, -+-4.94962272244652261993e-03, -+-4.88364469251110090015e-03, -+-4.81534550214015970304e-03, -+-4.74476639664476486369e-03, -+-4.67194967986881478511e-03, -+-4.59693868961848651350e-03, -+-4.51977777262569171968e-03, -+-4.44051225906016977518e-03, -+-4.35918843660393785094e-03, -+-4.27585352410331936968e-03, -+-4.19055564481250319292e-03, -+-4.10334379924411681712e-03, -+-4.01426783764161857621e-03, -+-3.92337843208837196152e-03, -+-3.83072704826951850737e-03, -+-3.73636591690094466492e-03, -+-3.64034800484260446379e-03, -+-3.54272698590992135906e-03, -+-3.44355721140094522825e-03, -+-3.34289368035381060859e-03, -+-3.24079200955149126021e-03, -+-3.13730840328953165461e-03, -+-3.03249962292274259992e-03, -+-2.92642295620787733917e-03, -+-2.81913618645769506812e-03, -+-2.71069756152355744588e-03, -+-2.60116576262271661374e-03, -+-2.49059987302636997100e-03, -+-2.37905934662592955658e-03, -+-2.26660397639284923177e-03, -+-2.15329386274948570215e-03, -+-2.03918938186720523700e-03, -+-1.92435115390780829905e-03, -+-1.80884001122574964056e-03, -+-1.69271696654636218636e-03, -+-1.57604318113799030283e-03, -+-1.45887993299307315576e-03, -+-1.34128858503558523983e-03, -+-1.22333055337022866653e-03, -+-1.10506727559064096139e-03, -+-9.86560179161664061245e-04, -+-8.67870649892684017067e-04, -+-7.49060000517653913794e-04, -+-6.30189439397319385409e-04, -+-5.11320039360376723744e-04, -+-3.92512706698102461101e-04, -+-2.73828150328942268588e-04, -+-1.55326851148111989192e-04, -+-3.70690315771187548660e-05, -+ 8.08853746707290755880e-05, -+ 1.98476752594946217068e-04, -+ 3.15645835666873892950e-04, -+ 4.32333735328772883737e-04, -+ 5.48481970218807931942e-04, -+ 6.64032495107181436854e-04, -+ 7.78927729529055225960e-04, -+ 8.93110586101435741449e-04, -+ 1.00652449850903457675e-03, -+ 1.11911344914620018882e-03, -+ 1.23082199640186964844e-03, -+ 1.34159530157362035657e-03, -+ 1.45137915539899904453e-03, -+ 1.56012000419063017430e-03, -+ 1.66776497556303743633e-03, -+ 1.77426190373947069608e-03, -+ 1.87955935442584700854e-03, -+ 1.98360664924133621098e-03, -+ 2.08635388969323877853e-03, -+ 2.18775198068548414054e-03, -+ 2.28775265355017198149e-03, -+ 2.38630848859077522237e-03, -+ 2.48337293712776532861e-03, -+ 2.57890034303572641614e-03, -+ 2.67284596376264485876e-03, -+ 2.76516599082240414204e-03, -+ 2.85581756975021973724e-03, -+ 2.94475881951346621368e-03, -+ 3.03194885136837165643e-03, -+ 3.11734778715522806505e-03, -+ 3.20091677702330967489e-03, -+ 3.28261801657889207284e-03, -+ 3.36241476344812956906e-03, -+ 3.44027135324883812095e-03, -+ 3.51615321496371192184e-03, -+ 3.59002688570913630964e-03, -+ 3.66186002489374750821e-03, -+ 3.73162142776055534565e-03, -+ 3.79928103830806575963e-03, -+ 3.86480996158482074943e-03, -+ 3.92818047535295911815e-03, -+ 3.98936604111683416202e-03, -+ 4.04834131451196205242e-03, -+ 4.10508215505163594206e-03, -+ 4.15956563522717256282e-03, -+ 4.21177004895932887568e-03, -+ 4.26167491939793193628e-03, -+ 4.30926100606804449861e-03, -+ 4.35451031136011804806e-03, -+ 4.39740608636303952073e-03, -+ 4.43793283603874291060e-03, -+ 4.47607632373735360443e-03, -+ 4.51182357505270758419e-03, -+ 4.54516288101758283297e-03, -+ 4.57608380063932208837e-03, -+ 4.60457716277592760817e-03, -+ 4.63063506735364276146e-03, -+ 4.65425088592728592590e-03, -+ 4.67541926158465074442e-03, -+ 4.69413610819694772369e-03, -+ 4.71039860901748680400e-03, -+ 4.72420521463094104236e-03, -+ 4.73555564025632692166e-03, -+ 4.74445086240650633347e-03, -+ 4.75089311490801708554e-03, -+ 4.75488588428478291259e-03, -+ 4.75643390451007622849e-03, -+ 4.75554315113093165057e-03, -+ 4.75222083476989180795e-03, -+ 4.74647539400918638819e-03, -+ 4.73831648766260323663e-03, -+ 4.72775498644069803317e-03, -+ 4.71480296401554071356e-03, -+ 4.69947368749087587836e-03, -+ 4.68178160728457970485e-03, -+ 4.66174234643011633356e-03, -+ 4.63937268930397338912e-03, -+ 4.61469056978682824754e-03, -+ 4.58771505886557909998e-03, -+ 4.55846635168473662131e-03, -+ 4.52696575405490270194e-03, -+ 4.49323566842705062613e-03, -+ 4.45729957934127077324e-03, -+ 4.41918203835877602265e-03, -+ 4.37890864848652049124e-03, -+ 4.33650604810387890753e-03, -+ 4.29200189440092326476e-03, -+ 4.24542484633809186906e-03, -+ 4.19680454713776754372e-03, -+ 4.14617160631750546196e-03, -+ 4.09355758127592610218e-03, -+ 4.03899495844180136256e-03, -+ 3.98251713399709519198e-03, -+ 3.92415839418544434153e-03, -+ 3.86395389521696766208e-03, -+ 3.80193964278122088427e-03, -+ 3.73815247117977034197e-03, -+ 3.67263002209005122098e-03, -+ 3.60541072297290579943e-03, -+ 3.53653376513536534670e-03, -+ 3.46603908146142026050e-03, -+ 3.39396732382294752731e-03, -+ 3.32035984018316321711e-03, -+ 3.24525865140575702286e-03, -+ 3.16870642778174132007e-03, -+ 3.09074646528776763449e-03, -+ 3.01142266158806225576e-03, -+ 2.93077949179369311866e-03, -+ 2.84886198399182102511e-03, -+ 2.76571569455873623317e-03, -+ 2.68138668326939897182e-03, -+ 2.59592148821740460393e-03, -+ 2.50936710055862152030e-03, -+ 2.42177093909172859790e-03, -+ 2.33318082468986958203e-03, -+ 2.24364495459622101392e-03, -+ 2.15321187659778126924e-03, -+ 2.06193046309074068043e-03, -+ 1.96984988505084042051e-03, -+ 1.87701958592308018950e-03, -+ 1.78348925544364851972e-03, -+ 1.68930880340843595812e-03, -+ 1.59452833340149326656e-03, -+ 1.49919811649695529192e-03, -+ 1.40336856494826384134e-03, -+ 1.30709020587860356294e-03, -+ 1.21041365498514362324e-03, -+ 1.11338959027166444805e-03, -+ 1.01606872582251793642e-03, -+ 9.18501785631088349393e-04, -+ 8.20739477496859018597e-04, -+ 7.22832467003395990300e-04, -+ 6.24831351591239583451e-04, -+ 5.26786634738466547599e-04, -+ 4.28748700261665177755e-04, -+ 3.30767786750949313850e-04, -+ 2.32893962150942354693e-04, -+ 1.35177098501164551355e-04, -+ 3.76668468481058423122e-05, -+-5.95873876588743519559e-05, -+-1.56536470474729711095e-04, -+-2.53131562157722037748e-04, -+-3.49324142647419787298e-04, -+-4.45066035310075810549e-04, -+-5.40309430740103734635e-04, -+-6.35006910305014118934e-04, -+-7.29111469423506203084e-04, -+-8.22576540564630594166e-04, -+-9.15356015957640898294e-04, -+-1.00740427000084128463e-03, -+-1.09867618135961594636e-03, -+-1.18912715474222760448e-03, -+-1.27871314234389459909e-03, -+-1.36739066494837155016e-03, -+-1.45511683267735177083e-03, -+-1.54184936537829454448e-03, -+-1.62754661264047644116e-03, -+-1.71216757343079406702e-03, -+-1.79567191533962417817e-03, -+-1.87801999342815861480e-03, -+-1.95917286866888803315e-03, -+-2.03909232597019587571e-03, -+-2.11774089177778042717e-03, -+-2.19508185124423979562e-03, -+-2.27107926495981587295e-03, -+-2.34569798523625184378e-03, -+-2.41890367193748701338e-03, -+-2.49066280784942736815e-03, -+-2.56094271358263403382e-03, -+-2.62971156200168766290e-03, -+-2.69693839217458606120e-03, -+-2.76259312283697608739e-03, -+-2.82664656536508410861e-03, -+-2.88907043625251033769e-03, -+-2.94983736908550680730e-03, -+-3.00892092601204481916e-03, -+-3.06629560870052934873e-03, -+-3.12193686878331445531e-03, -+-3.17582111778177576464e-03, -+-3.22792573650879186659e-03, -+-3.27822908394535990351e-03, -+-3.32671050558861836413e-03, -+-3.37335034126782541686e-03, -+-3.41812993242640843911e-03, -+-3.46103162886747485125e-03, -+-3.50203879496072990885e-03, -+-3.54113581530953033458e-03, -+-3.57830809987640932265e-03, -+-3.61354208856588636489e-03, -+-3.64682525526394910736e-03, -+-3.67814611133359227815e-03, -+-3.70749420856602597552e-03, -+-3.73486014158783824479e-03, -+-3.76023554972410066835e-03, -+-3.78361311831824139590e-03, -+-3.80498657950949356263e-03, -+-3.82435071246891309174e-03, -+-3.84170134309564249159e-03, -+-3.85703534317483227867e-03, -+-3.87035062899941184958e-03, -+-3.88164615945781315415e-03, -+-3.89092193359018290177e-03, -+-3.89817898761586753217e-03, -+-3.90341939143522623223e-03, -+-3.90664624460901419717e-03, -+-3.90786367181894002398e-03, -+-3.90707681781324485393e-03, -+-3.90429184184126710708e-03, -+-3.89951591158146492616e-03, -+-3.89275719656733548701e-03, -+-3.88402486111620462786e-03, -+-3.87332905676572971168e-03, -+-3.86068091422367464308e-03, -+-3.84609253483633988652e-03, -+-3.82957698158139896172e-03, -+-3.81114826959133828205e-03, -+-3.79082135621343309026e-03, -+-3.76861213061301580582e-03, -+-3.74453740292646350060e-03, -+-3.71861489297091191847e-03, -+-3.69086321851783442580e-03, -+-3.66130188313754665122e-03, -+-3.62995126362247863203e-03, -+-3.59683259699652849509e-03, -+-3.56196796711877707378e-03, -+-3.52538029088927777621e-03, -+-3.48709330406542271710e-03, -+-3.44713154669716278014e-03, -+-3.40552034818984500006e-03, -+-3.36228581200323853317e-03, -+-3.31745479999584480524e-03, -+-3.27105491642360043589e-03, -+-3.22311449160199306810e-03, -+-3.17366256524132884023e-03, -+-3.12272886946435550976e-03, -+-3.07034381151609402430e-03, -+-3.01653845617577253541e-03, -+-2.96134450788043245700e-03, -+-2.90479429257073850854e-03, -+-2.84692073926870632683e-03, -+-2.78775736139794984292e-03, -+-2.72733823785672839513e-03, -+-2.66569799385409870324e-03, -+-2.60287178151993913236e-03, -+-2.53889526029965357373e-03, -+-2.47380457714372692726e-03, -+-2.40763634650355490621e-03, -+-2.34042763014413865083e-03, -+-2.27221591678447533066e-03, -+-2.20303910157702452152e-03, -+-2.13293546543681959357e-03, -+-2.06194365423175264909e-03, -+-1.99010265784496783933e-03, -+-1.91745178912041433321e-03, -+-1.84403066270314016858e-03, -+-1.76987917378504866148e-03, -+-1.69503747676780160310e-03, -+-1.61954596385395933195e-03, -+-1.54344524357734455208e-03, -+-1.46677611928450082716e-03, -+-1.38957956757772282952e-03, -+-1.31189671673156917249e-03, -+-1.23376882509377769348e-03, -+-1.15523725948148982788e-03, -+-1.07634347358468449377e-03, -+-9.97128986387143959394e-04, -+-9.17635360616648500243e-04, -+-8.37904181234895789956e-04, -+-7.57977033978787513406e-04, -+-6.77895483963235779418e-04, -+-5.97701054357152421204e-04, -+-5.17435205142649512489e-04, -+-4.37139311968777596797e-04, -+-3.56854645110210024969e-04, -+-2.76622348541154185371e-04, -+-1.96483419135612727945e-04, -+-1.16478686003570469231e-04, -+-3.66487899740422618075e-05, -+ 4.29658367651341511670e-05, -+ 1.22324990860946911401e-04, -+ 2.01388717811737909388e-04, -+ 2.80117331797544979934e-04, -+ 3.58471435313892643378e-04, -+ 4.36411938600040889922e-04, -+ 5.13900078851591240840e-04, -+ 5.90897439209055901944e-04, -+ 6.67365967512406946770e-04, -+ 7.43267994812951346417e-04, -+ 8.18566253633950927961e-04, -+ 8.93223895970637264512e-04, -+ 9.67204511021861590946e-04, -+ 1.04047214264425358192e-03, -+ 1.11299130652140420249e-03, -+ 1.18472700703946731866e-03, -+ 1.25564475386154045418e-03, -+ 1.32571057819342382096e-03, -+ 1.39489104873262805863e-03, -+ 1.46315328729405358735e-03, -+ 1.53046498410463441449e-03, -+ 1.59679441276025036248e-03, -+ 1.66211044483838841015e-03, -+ 1.72638256415947395801e-03, -+ 1.78958088069116868016e-03, -+ 1.85167614408905580742e-03, -+ 1.91263975686785663195e-03, -+ 1.97244378719760738577e-03, -+ 2.03106098131931389963e-03, -+ 2.08846477557452425353e-03, -+ 2.14462930804391795764e-03, -+ 2.19952942979019039696e-03, -+ 2.25314071570019555310e-03, -+ 2.30543947492238164229e-03, -+ 2.35640276089497556142e-03, -+ 2.40600838096100867747e-03, -+ 2.45423490556669890092e-03, -+ 2.50106167703914496897e-03, -+ 2.54646881794065452556e-03, -+ 2.59043723899601840976e-03, -+ 2.63294864659046256791e-03, -+ 2.67398554983521103204e-03, -+ 2.71353126719851020857e-03, -+ 2.75156993270003411012e-03, -+ 2.78808650166653335112e-03, -+ 2.82306675604716231925e-03, -+ 2.85649730928709153985e-03, -+ 2.88836561075816750793e-03, -+ 2.91865994974546466220e-03, -+ 2.94736945898928888107e-03, -+ 2.97448411778179853254e-03, -+ 2.99999475461813899443e-03, -+ 3.02389304940205334848e-03, -+ 3.04617153520601608579e-03, -+ 3.06682359958635559691e-03, -+ 3.08584348545404892755e-03, -+ 3.10322629150200672218e-03, -+ 3.11896797218987227585e-03, -+ 3.13306533728775369815e-03, -+ 3.14551605098039102626e-03, -+ 3.15631863053354591933e-03, -+ 3.16547244452441024071e-03, -+ 3.17297771063858400492e-03, -+ 3.17883549303571563346e-03, -+ 3.18304769928660826611e-03, -+ 3.18561707688456985377e-03, -+ 3.18654720933417290318e-03, -+ 3.18584251182050994661e-03, -+ 3.18350822646264360050e-03, -+ 3.17955041715474407901e-03, -+ 3.17397596399888754642e-03, -+ 3.16679255733362226624e-03, -+ 3.15800869136252529770e-03, -+ 3.14763365738724267343e-03, -+ 3.13567753664971719460e-03, -+ 3.12215119278838691003e-03, -+ 3.10706626391348732577e-03, -+ 3.09043515430657261128e-03, -+ 3.07227102574976181429e-03, -+ 3.05258778849025729646e-03, -+ 3.03140009184578061371e-03, -+ 3.00872331445699433758e-03, -+ 2.98457355419296660459e-03, -+ 2.95896761771581541176e-03, -+ 2.93192300971099667137e-03, -+ 2.90345792178986830678e-03, -+ 2.87359122107115833381e-03, -+ 2.84234243844815569202e-03, -+ 2.80973175654865899714e-03, -+ 2.77577999739489662823e-03, -+ 2.74050860977057735360e-03, -+ 2.70393965630238552328e-03, -+ 2.66609580026378606421e-03, -+ 2.62700029210837524354e-03, -+ 2.58667695574077254050e-03, -+ 2.54515017453282822377e-03, -+ 2.50244487709332368713e-03, -+ 2.45858652279897166651e-03, -+ 2.41360108709495107052e-03, -+ 2.36751504657360840878e-03, -+ 2.32035536383917847733e-03, -+ 2.27214947216734537011e-03, -+ 2.22292525996793232518e-03, -+ 2.17271105505975571301e-03, -+ 2.12153560876561335380e-03, -+ 2.06942807983705873154e-03, -+ 2.01641801821680422338e-03, -+ 1.96253534864859182849e-03, -+ 1.90781035414268307880e-03, -+ 1.85227365930619859540e-03, -+ 1.79595621354771339470e-03, -+ 1.73888927416449511586e-03, -+ 1.68110438932177089048e-03, -+ 1.62263338093348468728e-03, -+ 1.56350832745304072283e-03, -+ 1.50376154658367453161e-03, -+ 1.44342557791726690958e-03, -+ 1.38253316551135724960e-03, -+ 1.32111724041281413007e-03, -+ 1.25921090313770521994e-03, -+ 1.19684740611688275949e-03, -+ 1.13406013611574898320e-03, -+ 1.07088259663794954646e-03, -+ 1.00734839032173340879e-03, -+ 9.43491201338451197442e-04, -+ 8.79344777802133358187e-04, -+ 8.14942914198997676867e-04, -+ 7.50319433846045077789e-04, -+ 6.85508171388117602645e-04, -+ 6.20542955341616764633e-04, -+ 5.55457590694125209752e-04, -+ 4.90285841569116395515e-04, -+ 4.25061413963795440944e-04, -+ 3.59817938569106346609e-04, -+ 2.94588953680933085706e-04, -+ 2.29407888210245771441e-04, -+ 1.64308044801349289110e-04, -+ 9.93225830661220992091e-05, -+ 3.44845029432159748818e-05, -+-3.01733718103322993271e-05, -+-9.46184099865878051579e-05, -+-1.58818189144901994068e-04, -+-2.22740511673599295237e-04, -+-2.86353420686933518319e-04, -+-3.49625215749474168095e-04, -+-4.12524468420490651472e-04, -+-4.75020037611034338584e-04, -+-5.37081084745966554420e-04, -+-5.98677088724102000189e-04, -+-6.59777860668749548644e-04, -+-7.20353558462378845868e-04, -+-7.80374701058222453379e-04, -+-8.39812182561741876058e-04, -+-8.98637286076072534964e-04, -+-9.56821697304657218380e-04, -+-1.01433751790445296839e-03, -+-1.07115727858425125243e-03, -+-1.12725395194157021125e-03, -+-1.18260096503265514645e-03, -+-1.23717221166938983953e-03, -+-1.29094206443821453087e-03, -+-1.34388538643541812813e-03, -+-1.39597754271321623266e-03, -+-1.44719441143244622640e-03, -+-1.49751239471598309415e-03, -+-1.54690842919921311277e-03, -+-1.59535999627203944548e-03, -+-1.64284513200888535912e-03, -+-1.68934243678199938477e-03, -+-1.73483108455441971917e-03, -+-1.77929083184826127527e-03, -+-1.82270202638530284291e-03, -+-1.86504561539608984359e-03, -+-1.90630315359404723698e-03, -+-1.94645681081197273812e-03, -+-1.98548937929780454012e-03, -+-2.02338428066662365593e-03, -+-2.06012557250690765687e-03, -+-2.09569795463821536424e-03, -+-2.13008677501847496286e-03, -+-2.16327803529848140124e-03, -+-2.19525839602226170363e-03, -+-2.22601518147149193827e-03, -+-2.25553638415244925991e-03, -+-2.28381066892440051305e-03, -+-2.31082737676846549160e-03, -+-2.33657652819600639496e-03, -+-2.36104882629574550773e-03, -+-2.38423565941946538627e-03, -+-2.40612910350581450311e-03, -+-2.42672192404203967281e-03, -+-2.44600757766397268814e-03, -+-2.46398021339438002067e-03, -+-2.48063467352028057047e-03, -+-2.49596649410964519650e-03, -+-2.50997190516864723125e-03, -+-2.52264783044025284534e-03, -+-2.53399188684540720151e-03, -+-2.54400238356825665262e-03, -+-2.55267832078691359055e-03, -+-2.56001938805160448795e-03, -+-2.56602596231194192769e-03, -+-2.57069910559561132235e-03, -+-2.57404056234069840772e-03, -+-2.57605275638400242275e-03, -+-2.57673878760806066013e-03, -+-2.57610242824962915389e-03, -+-2.57414811887259368725e-03, -+-2.57088096400836900457e-03, -+-2.56630672746716416779e-03, -+-2.56043182732341697075e-03, -+-2.55326333057917390437e-03, -+-2.54480894750897836121e-03, -+-2.53507702569032763312e-03, -+-2.52407654372365647388e-03, -+-2.51181710464612895778e-03, -+-2.49830892904353337597e-03, -+-2.48356284786475705814e-03, -+-2.46759029494360467016e-03, -+-2.45040329923257435216e-03, -+-2.43201447675357512387e-03, -+-2.41243702227060758184e-03, -+-2.39168470068965325834e-03, -+-2.36977183819085321370e-03, -+-2.34671331309871259233e-03, -+-2.32252454649548413859e-03, -+-2.29722149258377488293e-03, -+-2.27082062880380698353e-03, -+-2.24333894571130537665e-03, -+-2.21479393662223902547e-03, -+-2.18520358703003540410e-03, -+-2.15458636380176215414e-03, -+-2.12296120415960722083e-03, -+-2.09034750445369690852e-03, -+-2.05676510873303809365e-03, -+-2.02223429712087166693e-03, -+-1.98677577400132665889e-03, -+-1.95041065602380068143e-03, -+-1.91316045993188566660e-03, -+-1.87504709022398054208e-03, -+-1.83609282665202818569e-03, -+-1.79632031156571974305e-03, -+-1.75575253710894539118e-03, -+-1.71441283227574312563e-03, -+-1.67232484983291908656e-03, -+-1.62951255311622692640e-03, -+-1.58600020270752910083e-03, -+-1.54181234300042021082e-03, -+-1.49697378866114633872e-03, -+-1.45150961099237444871e-03, -+-1.40544512420743054025e-03, -+-1.35880587162187237323e-03, -+-1.31161761177006727826e-03, -+-1.26390630445442453227e-03, -+-1.21569809673418671551e-03, -+-1.16701930886166653674e-03, -+-1.11789642017300181083e-03, -+-1.06835605494137557414e-03, -+-1.01842496819956130141e-03, -+-9.68130031539442812739e-04, -+-9.17498218896290623249e-04, -+-8.66556592324564493868e-04, -+-8.15332287772978616183e-04, -+-7.63852500866257408917e-04, -+-7.12144472700820384964e-04, -+-6.60235475661517237297e-04, -+-6.08152799267011124132e-04, -+-5.55923736050680200420e-04, -+-5.03575567484773503439e-04, -+-4.51135549954315671906e-04, -+-3.98630900788171399930e-04, -+-3.46088784354618185513e-04, -+-2.93536298227804867602e-04, -+-2.41000459432347881880e-04, -+-1.88508190773214112049e-04, -+-1.36086307257084302303e-04, -+-8.37615026124415208318e-05, -+-3.15603359146758591044e-05, -+ 2.04907816767023618287e-05, -+ 7.23656000628412833693e-05, -+ 1.24038043225600054433e-04, -+ 1.75482222116205200833e-04, -+ 2.26672447407071596913e-04, -+ 2.77583242099614419147e-04, -+ 3.28189353983021332804e-04, -+ 3.78465767937005519422e-04, -+ 4.28387718073507952569e-04, -+ 4.77930699711027453993e-04, -+ 5.27070481176294264314e-04, -+ 5.75783115427220041314e-04, -+ 6.24044951492278227381e-04, -+ 6.71832645720683982113e-04, -+ 7.19123172837888647094e-04, -+ 7.65893836801815361230e-04, -+ 8.12122281454607207463e-04, -+ 8.57786500964706813931e-04, -+ 9.02864850055145489773e-04, -+ 9.47336054012924352885e-04, -+ 9.91179218475344821562e-04, -+ 1.03437383898850724685e-03, -+ 1.07689981033424705438e-03, -+ 1.11873743562118156160e-03, -+ 1.15986743513579325555e-03, -+ 1.20027095494985164281e-03, -+ 1.23992957528063201672e-03, -+ 1.27882531860024116835e-03, -+ 1.31694065749045157408e-03, -+ 1.35425852224024464987e-03, -+ 1.39076230818266951932e-03, -+ 1.42643588276789089024e-03, -+ 1.46126359237003949389e-03, -+ 1.49523026882479484305e-03, -+ 1.52832123569547530945e-03, -+ 1.56052231426488533308e-03, -+ 1.59181982925111196493e-03, -+ 1.62220061424500194142e-03, -+ 1.65165201686719317030e-03, -+ 1.68016190364333106375e-03, -+ 1.70771866459552704512e-03, -+ 1.73431121754877184786e-03, -+ 1.75992901215076880984e-03, -+ 1.78456203360429659956e-03, -+ 1.80820080611094821665e-03, -+ 1.83083639602529585529e-03, -+ 1.85246041471891220720e-03, -+ 1.87306502115368290161e-03, -+ 1.89264292416397640097e-03, -+ 1.91118738444732896159e-03, -+ 1.92869221626372814270e-03, -+ 1.94515178884347187879e-03, -+ 1.96056102750367033591e-03, -+ 1.97491541447399011552e-03, -+ 1.98821098943195847739e-03, -+ 2.00044434974860733945e-03, -+ 2.01161265044509608366e-03, -+ 2.02171360386141883703e-03, -+ 2.03074547903829647627e-03, -+ 2.03870710081329245544e-03, -+ 2.04559784863279697439e-03, -+ 2.05141765508121132200e-03, -+ 2.05616700412915255278e-03, -+ 2.05984692910230610119e-03, -+ 2.06245901037309994214e-03, -+ 2.06400537277705341602e-03, -+ 2.06448868275625058155e-03, -+ 2.06391214523207744413e-03, -+ 2.06227950020990537586e-03, -+ 2.05959501911819184081e-03, -+ 2.05586350088483903534e-03, -+ 2.05109026775365885925e-03, -+ 2.04528116084394225374e-03, -+ 2.03844253545626581670e-03, -+ 2.03058125612778830188e-03, -+ 2.02170469144040887075e-03, -+ 2.01182070858521491047e-03, -+ 2.00093766768695948202e-03, -+ 1.98906441589210680049e-03, -+ 1.97621028122438920777e-03, -+ 1.96238506621177182659e-03, -+ 1.94759904128888393197e-03, -+ 1.93186293797900990321e-03, -+ 1.91518794185986402506e-03, -+ 1.89758568531769714928e-03, -+ 1.87906824009385019746e-03, -+ 1.85964810962852347687e-03, -+ 1.83933822120627122297e-03, -+ 1.81815191790804173144e-03, -+ 1.79610295037441560807e-03, -+ 1.77320546838494034515e-03, -+ 1.74947401225873200130e-03, -+ 1.72492350408103120758e-03, -+ 1.69956923876105037673e-03, -+ 1.67342687492632539309e-03, -+ 1.64651242565860508361e-03, -+ 1.61884224907680703345e-03, -+ 1.59043303877220510226e-03, -+ 1.56130181410158168538e-03, -+ 1.53146591034349164456e-03, -+ 1.50094296872333799256e-03, -+ 1.46975092631300560328e-03, -+ 1.43790800581038743892e-03, -+ 1.40543270520465083014e-03, -+ 1.37234378733301696889e-03, -+ 1.33866026933477191320e-03, -+ 1.30440141200818598630e-03, -+ 1.26958670907636713213e-03, -+ 1.23423587636767762184e-03, -+ 1.19836884091695044206e-03, -+ 1.16200572999298904278e-03, -+ 1.12516686005846404395e-03, -+ 1.08787272566834868938e-03, -+ 1.05014398831246302812e-03, -+ 1.01200146520824866246e-03, -+ 9.73466118049983288388e-04, -+ 9.34559041719948196611e-04, -+ 8.95301452967915711335e-04, -+ 8.55714679064593008659e-04, -+ 8.15820146435422468428e-04, -+ 7.75639369280203805866e-04, -+ 7.35193938184691589237e-04, -+ 6.94505508730360781103e-04, -+ 6.53595790107610935191e-04, -+ 6.12486533739071471218e-04, -+ 5.71199521918073420228e-04, -+ 5.29756556468897262142e-04, -+ 4.88179447433947737416e-04, -+ 4.46490001794050709802e-04, -+ 4.04710012227305993091e-04, -+ 3.62861245912609686835e-04, -+ 3.20965433382992511909e-04, -+ 2.79044257434640438631e-04, -+ 2.37119342097372800019e-04, -+ 1.95212241671636533603e-04, -+ 1.53344429837704167947e-04, -+ 1.11537288842718541599e-04, -+ 6.98120987704314377789e-05, -+ 2.81900268993452554395e-05, -+-1.33078828458379828427e-05, -+-5.46607203438825674300e-05, -+-9.58477196232063128950e-05, -+-1.36848269099311073286e-04, -+-1.77641921698430010380e-04, -+-2.18208404862630192013e-04, -+-2.58527630431676846631e-04, -+-2.98579704396867049668e-04, -+-3.38344936521953437280e-04, -+-3.77803849827058782322e-04, -+-4.16937189930904319925e-04, -+-4.55725934246739843459e-04, -+-4.94151301028182598010e-04, -+-5.32194758260364701556e-04, -+-5.69838032392598397777e-04, -+-6.07063116908156791794e-04, -+-6.43852280727741713151e-04, -+-6.80188076442613171781e-04, -+-7.16053348373450011463e-04, -+-7.51431240451819475352e-04, -+-7.86305203920363614614e-04, -+-8.20659004848588277854e-04, -+-8.54476731460626398769e-04, -+-8.87742801272211191736e-04, -+-9.20441968033579760618e-04, -+-9.52559328475276884118e-04, -+-9.84080328854130366098e-04, -+-1.01499077129671671886e-03, -+-1.04527681993767346084e-03, -+-1.07492500685012399610e-03, -+-1.10392223776622968451e-03, -+-1.13225579758538573774e-03, -+-1.15991335566776048067e-03, -+-1.18688297091152023324e-03, -+-1.21315309661150744040e-03, -+-1.23871258509778933189e-03, -+-1.26355069215218973264e-03, -+-1.28765708120147479195e-03, -+-1.31102182728572635648e-03, -+-1.33363542080036233568e-03, -+-1.35548877101096445358e-03, -+-1.37657320933958870861e-03, -+-1.39688049242180935793e-03, -+-1.41640280493340441764e-03, -+-1.43513276218638474030e-03, -+-1.45306341249334513427e-03, -+-1.47018823930013145355e-03, -+-1.48650116308605430814e-03, -+-1.50199654303180877256e-03, -+-1.51666917845484855790e-03, -+-1.53051431001215848537e-03, -+-1.54352762067077827791e-03, -+-1.55570523644627803014e-03, -+-1.56704372690943645810e-03, -+-1.57754010546188694168e-03, -+-1.58719182938115940286e-03, -+-1.59599679963599232028e-03, -+-1.60395336047266818397e-03, -+-1.61106029877347285521e-03, -+-1.61731684318832920691e-03, -+-1.62272266304074063749e-03, -+-1.62727786700950075895e-03, -+-1.63098300158752559583e-03, -+-1.63383904931938927878e-03, -+-1.63584742681915007098e-03, -+-1.63700998257036147918e-03, -+-1.63732899451001076216e-03, -+-1.63680716739846910703e-03, -+-1.63544762997745404300e-03, -+-1.63325393191824947553e-03, -+-1.63023004056244216753e-03, -+-1.62638033745757639228e-03, -+-1.62170961469021174955e-03, -+-1.61622307101895478811e-03, -+-1.60992630781018361379e-03, -+-1.60282532477918769794e-03, -+-1.59492651553961163439e-03, -+-1.58623666296416683703e-03, -+-1.57676293435965995428e-03, -+-1.56651287645941865272e-03, -+-1.55549441023637930251e-03, -+-1.54371582554013535814e-03, -+-1.53118577556127515200e-03, -+-1.51791327112649242562e-03, -+-1.50390767482801038582e-03, -+-1.48917869499094052133e-03, -+-1.47373637948217746547e-03, -+-1.45759110936466060836e-03, -+-1.44075359240074425682e-03, -+-1.42323485640868073465e-03, -+-1.40504624247599204864e-03, -+-1.38619939803382081524e-03, -+-1.36670626979641294217e-03, -+-1.34657909656966815262e-03, -+-1.32583040193301449593e-03, -+-1.30447298679896685550e-03, -+-1.28251992185438013459e-03, -+-1.25998453988795662377e-03, -+-1.23688042800817435581e-03, -+-1.21322141975630610686e-03, -+-1.18902158711867676766e-03, -+-1.16429523244280098797e-03, -+-1.13905688026204581637e-03, -+-1.11332126903301116203e-03, -+-1.08710334279067352171e-03, -+-1.06041824272541424130e-03, -+-1.03328129868704887868e-03, -+-1.00570802062011207742e-03, -+-9.77714089935322180555e-04, -+-9.49315350821759501229e-04, -+-9.20527801504691478400e-04, -+-8.91367585453492765508e-04, -+-8.61850982544499480062e-04, -+-8.31994400183724228809e-04, -+-8.01814364393843201882e-04, -+-7.71327510870362977047e-04, -+-7.40550576011879011992e-04, -+-7.09500387928816301369e-04, -+-6.78193857435692871310e-04, -+-6.46647969031396334730e-04, -+-6.14879771872516131710e-04, -+-5.82906370744061324771e-04, -+-5.50744917032461615489e-04, -+-5.18412599705563741960e-04, -+-4.85926636304230086336e-04, -+-4.53304263950078342206e-04, -+-4.20562730374023118537e-04, -+-3.87719284970423796848e-04, -+-3.54791169881019867287e-04, -+-3.21795611113349097968e-04, -+-2.88749809698345409788e-04, -+-2.55670932891157169815e-04, -+-2.22576105419946933131e-04, -+-1.89482400786797724242e-04, -+-1.56406832625384566377e-04, -+-1.23366346119315335164e-04, -+-9.03778094855688048136e-05, -+-5.74580055274082543144e-05, -+-2.46236232605249242254e-05, -+ 8.10875038316639484403e-06, -+ 4.07226387702898438674e-05, -+ 7.32016836950174766508e-05, -+ 1.05529653418793463730e-04, -+ 1.37690450616703013997e-04, -+ 1.69668120226623675949e-04, -+ 2.01446857197505152211e-04, -+ 2.33011014133184106998e-04, -+ 2.64345108828066273181e-04, -+ 2.95433831690941053547e-04, -+ 3.26262053053821875562e-04, -+ 3.56814830362236329840e-04, -+ 3.87077415243466558745e-04, -+ 4.17035260449873101951e-04, -+ 4.46674026673809685620e-04, -+ 4.75979589231274630330e-04, -+ 5.04938044610982032269e-04, -+ 5.33535716886269443388e-04, -+ 5.61759163986835612092e-04, -+ 5.89595183827354429873e-04, -+ 6.17030820290651992738e-04, -+ 6.44053369062530110985e-04, -+ 6.70650383315962803771e-04, -+ 6.96809679241917109133e-04, -+ 7.22519341424928177552e-04, -+ 7.47767728060641924219e-04, -+ 7.72543476013702731450e-04, -+ 7.96835505713403631674e-04, -+ 8.20633025885535226200e-04, -+ 8.43925538118381487161e-04, -+ 8.66702841260924973336e-04, -+ 8.88955035651854165446e-04, -+ 9.10672527177615212350e-04, -+ 9.31846031157871484973e-04, -+ 9.52466576057239681409e-04, -+ 9.72525507021732124775e-04, -+ 9.92014489238877755425e-04, -+ 1.01092551112014119447e-03, -+ 1.02925088730489687483e-03, -+ 1.04698326148487523037e-03, -+ 1.06411560904814419225e-03, -+ 1.08064123954212140503e-03, -+ 1.09655379895474709012e-03, -+ 1.11184727181350227060e-03, -+ 1.12651598310145530275e-03, -+ 1.14055459999043234086e-03, -+ 1.15395813339070935251e-03, -+ 1.16672193931725690953e-03, -+ 1.17884172007230573521e-03, -+ 1.19031352524443380207e-03, -+ 1.20113375252423222606e-03, -+ 1.21129914833666986994e-03, -+ 1.22080680829065105208e-03, -+ 1.22965417744607123825e-03, -+ 1.23783905039882846655e-03, -+ 1.24535957118451323482e-03, -+ 1.25221423300135711529e-03, -+ 1.25840187775329488164e-03, -+ 1.26392169541390537828e-03, -+ 1.26877322321232639292e-03, -+ 1.27295634464211107444e-03, -+ 1.27647128829414154005e-03, -+ 1.27931862651490548498e-03, -+ 1.28149927389138891531e-03, -+ 1.28301448556399880392e-03, -+ 1.28386585536898346210e-03, -+ 1.28405531381196435364e-03, -+ 1.28358512587416814105e-03, -+ 1.28245788865312404514e-03, -+ 1.28067652883962455890e-03, -+ 1.27824430003284665244e-03, -+ 1.27516477989559045420e-03, -+ 1.27144186715168476705e-03, -+ 1.26707977842766580760e-03, -+ 1.26208304494093768826e-03, -+ 1.25645650903666696377e-03, -+ 1.25020532057574596321e-03, -+ 1.24333493317623205304e-03, -+ 1.23585110031071486285e-03, -+ 1.22775987126220184967e-03, -+ 1.21906758694106096864e-03, -+ 1.20978087556570016413e-03, -+ 1.19990664820977745338e-03, -+ 1.18945209421860830651e-03, -+ 1.17842467649774342194e-03, -+ 1.16683212667649549056e-03, -+ 1.15468244014949755240e-03, -+ 1.14198387099919015063e-03, -+ 1.12874492680236585690e-03, -+ 1.11497436332383317165e-03, -+ 1.10068117910044980384e-03, -+ 1.08587460991860403070e-03, -+ 1.07056412318845268865e-03, -+ 1.05475941221827552129e-03, -+ 1.03847039039213777552e-03, -+ 1.02170718525430208670e-03, -+ 1.00448013250386408712e-03, -+ 9.86799769902908796571e-04, -+ 9.68676831101775311604e-04, -+ 9.50122239384842536686e-04, -+ 9.31147101340516931967e-04, -+ 9.11762700458799784341e-04, -+ 8.91980490660106628206e-04, -+ 8.71812089758989324645e-04, -+ 8.51269272866356447108e-04, -+ 8.30363965733769732354e-04, -+ 8.09108238043540397427e-04, -+ 7.87514296648406260902e-04, -+ 7.65594478764287304610e-04, -+ 7.43361245119910263486e-04, -+ 7.20827173067144330761e-04, -+ 6.98004949655533580080e-04, -+ 6.74907364674943543829e-04, -+ 6.51547303669901115876e-04, -+ 6.27937740929578719871e-04, -+ 6.04091732456894250046e-04, -+ 5.80022408920566161228e-04, -+ 5.55742968593996586671e-04, -+ 5.31266670284408345712e-04, -+ 5.06606826256191336046e-04, -+ 4.81776795151971288286e-04, -+ 4.56789974915332633570e-04, -+ 4.31659795718581772855e-04, -+ 4.06399712899354833857e-04, -+ 3.81023199909761244551e-04, -+ 3.55543741281616379035e-04, -+ 3.29974825611307478416e-04, -+ 3.04329938567904757871e-04, -+ 2.78622555928232935440e-04, -+ 2.52866136642138929734e-04, -+ 2.27074115931597155090e-04, -+ 2.01259898427254919819e-04, -+ 1.75436851345555256277e-04, -+ 1.49618297710086417540e-04, -+ 1.23817509620332964109e-04, -+ 9.80477015714136803867e-05, -+ 7.23220238277867656044e-05, -+ 4.66535558543199922808e-05, -+ 2.10552998080745397132e-05, -+-4.45982590633637267685e-06, -+-2.98789930144383005840e-05, -+-5.51894696797388301145e-05, -+-8.03786267385361320997e-05, -+-1.05433943858796803006e-04, -+-1.30343015620240231141e-04, -+-1.55093557512704107414e-04, -+-1.79673411849813922459e-04, -+-2.04070553595469639328e-04, -+-2.28273096100298591472e-04, -+-2.52269296745275168909e-04, -+-2.76047562490193821964e-04, -+-2.99596455324310003560e-04, -+-3.22904697616543522477e-04, -+-3.45961177363105203825e-04, -+-3.68754953329960058744e-04, -+-3.91275260088006534946e-04, -+-4.13511512938510329696e-04, -+-4.35453312726917203881e-04, -+-4.57090450542803317623e-04, -+-4.78412912303817451296e-04, -+-4.99410883221915679296e-04, -+-5.20074752149766658671e-04, -+-5.40395115805737333292e-04, -+-5.60362782875298238647e-04, -+-5.79968777987699369778e-04, -+-5.99204345565891864818e-04, -+-6.18060953548384053174e-04, -+-6.36530296981365232775e-04, -+-6.54604301479925370678e-04, -+-6.72275126556943374879e-04, -+-6.89535168818290744586e-04, -+-7.06377065023390971615e-04, -+-7.22793695009926024340e-04, -+-7.38778184481572101731e-04, -+-7.54323907658020135873e-04, -+-7.69424489786242268852e-04, -+-7.84073809512324942927e-04, -+-7.98266001112985629749e-04, -+-8.11995456586320977881e-04, -+-8.25256827601124256372e-04, -+-8.38045027304191287275e-04, -+-8.50355231985365717443e-04, -+-8.62182882599891249782e-04, -+-8.73523686147764872115e-04, -+-8.84373616909959786754e-04, -+-8.94728917541413090037e-04, -+-9.04586100020679756244e-04, -+-9.13941946456355816704e-04, -+-9.22793509750267264627e-04, -+-9.31138114117751138944e-04, -+-9.38973355465201283722e-04, -+-9.46297101625169024067e-04, -+-9.53107492449534513500e-04, -+-9.59402939761150449702e-04, -+-9.65182127164483996684e-04, -+-9.70444009715949393313e-04, -+-9.75187813454562795953e-04, -+-9.79413034793723616400e-04, -+-9.83119439774883139768e-04, -+-9.86307063184082167401e-04, -+-9.88976207532291833394e-04, -+-9.91127441900544869230e-04, -+-9.92761600651050806279e-04, -+-9.93879782005378667811e-04, -+-9.94483346490992797459e-04, -+-9.94573915257405570187e-04, -+-9.94153368263331295093e-04, -+-9.93223842336246652909e-04, -+-9.91787729105850180897e-04, -+-9.89847672812951264940e-04, -+-9.87406567995411906316e-04, -+-9.84467557052782528404e-04, -+-9.81034027691367847834e-04, -+-9.77109610251477699733e-04, -+-9.72698174918703792335e-04, -+-9.67803828821115733234e-04, -+-9.62430913014279427325e-04, -+-9.56583999356122919276e-04, -+-9.50267887273650141942e-04, -+-9.43487600423628257514e-04, -+-9.36248383249343269982e-04, -+-9.28555697435622562526e-04, -+-9.20415218264345998470e-04, -+-9.11832830872733794518e-04, -+-9.02814626416679100358e-04, -+-8.93366898141493941121e-04, -+-8.83496137362504399722e-04, -+-8.73209029357859358757e-04, -+-8.62512449176020662943e-04, -+-8.51413457360529739998e-04, -+-8.39919295594453380396e-04, -+-8.28037382267176572288e-04, -+-8.15775307966064137412e-04, -+-8.03140830895733765817e-04, -+-7.90141872227454497395e-04, -+-7.76786511381427125823e-04, -+-7.63082981244709722575e-04, -+-7.49039663327390583050e-04, -+-7.34665082859875225377e-04, -+-7.19967903833961626534e-04, -+-7.04956923990644160512e-04, -+-6.89641069757283018196e-04, -+-6.74029391137054853869e-04, -+-6.58131056553546409972e-04, -+-6.41955347653322514097e-04, -+-6.25511654069284880192e-04, -+-6.08809468147721304272e-04, -+-5.91858379642030605315e-04, -+-5.74668070375839888306e-04, -+-5.57248308878482566560e-04, -+-5.39608944995842118066e-04, -+-5.21759904479256251923e-04, -+-5.03711183555554655941e-04, -+-4.85472843480994986718e-04, -+-4.67055005082172224832e-04, -+-4.48467843286585717087e-04, -+-4.29721581645848931235e-04, -+-4.10826486854523479156e-04, -+-3.91792863267230776457e-04, -+-3.72631047417096349181e-04, -+-3.53351402538234474118e-04, -+-3.33964313095238879339e-04, -+-3.14480179322441726845e-04, -+-2.94909411775696268711e-04, -+-2.75262425899514299663e-04, -+-2.55549636612443630684e-04, -+-2.35781452913229664075e-04, -+-2.15968272510589943134e-04, -+-1.96120476479425779204e-04, -+-1.76248423945933802622e-04, -+-1.56362446804383454146e-04, -+-1.36472844468305155993e-04, -+-1.16589878658458767635e-04, -+-9.67237682303544415822e-05, -+-7.68846840437216406863e-05, -+-5.70827438766376965410e-05, -+-3.73280073865603565495e-05, -+-1.76304711208225556719e-05, -+ 1.99993642088864226016e-06, -+ 2.15533596699292954036e-05, -+ 4.10200208154242509364e-05, -+ 6.03902245722433725860e-05, -+ 7.96543628875890849517e-05, -+ 9.88029195844659414733e-05, -+ 1.17826474939476195025e-04, -+ 1.36715710193023647035e-04, -+ 1.55461411989631342456e-04, -+ 1.74054476746553134919e-04, -+ 1.92485914948569894868e-04, -+ 2.10746855366906229437e-04, -+ 2.28828549200575789499e-04, -+ 2.46722374138184409598e-04, -+ 2.64419838338276027342e-04, -+ 2.81912584326679917842e-04, -+ 2.99192392808960154656e-04, -+ 3.16251186396444155819e-04, -+ 3.33081033244039836395e-04, -+ 3.49674150598494463179e-04, -+ 3.66022908255491080231e-04, -+ 3.82119831924034101915e-04, -+ 3.97957606496917735885e-04, -+ 4.13529079225828470872e-04, -+ 4.28827262799762372065e-04, -+ 4.43845338325564724331e-04, -+ 4.58576658209470361914e-04, -+ 4.73014748938412597258e-04, -+ 4.87153313760160528844e-04, -+ 5.00986235261103489760e-04, -+ 5.14507577840937952753e-04, -+ 5.27711590083254872101e-04, -+ 5.40592707021128712937e-04, -+ 5.53145552297087950144e-04, -+ 5.65364940216665540391e-04, -+ 5.77245877694797693454e-04, -+ 5.88783566094626962042e-04, -+ 5.99973402958039613193e-04, -+ 6.10810983627539487439e-04, -+ 6.21292102758916895203e-04, -+ 6.31412755724494408928e-04, -+ 6.41169139906554250846e-04, -+ 6.50557655880656818606e-04, -+ 6.59574908488803728079e-04, -+ 6.68217707802125100019e-04, -+ 6.76483069973211437013e-04, -+ 6.84368217977891248049e-04, -+ 6.91870582246639927691e-04, -+ 6.98987801185634960270e-04, -+ 7.05717721587660520161e-04, -+ 7.12058398933015208009e-04, -+ 7.18008097580767590783e-04, -+ 7.23565290850654123378e-04, -+ 7.28728660995954687085e-04, -+ 7.33497099067867354590e-04, -+ 7.37869704671835252748e-04, -+ 7.41845785616332496076e-04, -+ 7.45424857454791262544e-04, -+ 7.48606642921267949158e-04, -+ 7.51391071260577316469e-04, -+ 7.53778277453638493114e-04, -+ 7.55768601338868977087e-04, -+ 7.57362586630487056617e-04, -+ 7.58560979834606492235e-04, -+ 7.59364729064121901821e-04, -+ 7.59774982753388386167e-04, -+ 7.59793088273752925850e-04, -+ 7.59420590451042459845e-04, -+ 7.58659229986178283191e-04, -+ 7.57510941780111337653e-04, -+ 7.55977853164323059486e-04, -+ 7.54062282038194995303e-04, -+ 7.51766734914572948463e-04, -+ 7.49093904874909206383e-04, -+ 7.46046669435407165151e-04, -+ 7.42628088325620098163e-04, -+ 7.38841401181018265533e-04, -+ 7.34690025151058076665e-04, -+ 7.30177552424332988561e-04, -+ 7.25307747672431467334e-04, -+ 7.20084545414128533031e-04, -+ 7.14512047301645285974e-04, -+ 7.08594519330652482768e-04, -+ 7.02336388975790940938e-04, -+ 6.95742242253507572024e-04, -+ 6.88816820714019178648e-04, -+ 6.81565018364235775117e-04, -+ 6.73991878523528100201e-04, -+ 6.66102590614281019760e-04, -+ 6.57902486889110115278e-04, -+ 6.49397039096706574744e-04, -+ 6.40591855088354865909e-04, -+ 6.31492675367040820315e-04, -+ 6.22105369581239602515e-04, -+ 6.12435932965378496476e-04, -+ 6.02490482729133372541e-04, -+ 5.92275254397530565020e-04, -+ 5.81796598104019854238e-04, -+ 5.71060974838680235344e-04, -+ 5.60074952653592437156e-04, -+ 5.48845202827616417997e-04, -+ 5.37378495992671769733e-04, -+ 5.25681698223757196999e-04, -+ 5.13761767094866308656e-04, -+ 5.01625747702958151193e-04, -+ 4.89280768662212254237e-04, -+ 4.76734038070840296462e-04, -+ 4.63992839452548365767e-04, -+ 4.51064527674926475653e-04, -+ 4.37956524847056961718e-04, -+ 4.24676316198432479525e-04, -+ 4.11231445941475173573e-04, -+ 3.97629513119952544397e-04, -+ 3.83878167445365014142e-04, -+ 3.69985105123653247247e-04, -+ 3.55958064674343052560e-04, -+ 3.41804822744478146133e-04, -+ 3.27533189919382002140e-04, -+ 3.13151006532530441166e-04, -+ 2.98666138476795246359e-04, -+ 2.84086473019086157080e-04, -+ 2.69419914620704385386e-04, -+ 2.54674380765407412045e-04, -+ 2.39857797797613132851e-04, -+ 2.24978096772516947353e-04, -+ 2.10043209320515654199e-04, -+ 1.95061063527882452839e-04, -+ 1.80039579835930709352e-04, -+ 1.64986666960563460723e-04, -+ 1.49910217834334317253e-04, -+ 1.34818105573139893332e-04, -+ 1.19718179469376976285e-04, -+ 1.04618261013640937926e-04, -+ 8.95261399470057895635e-05, -+ 7.44495703456539838043e-05, -+ 5.93962667399166655609e-05, -+ 4.43739002695007426613e-05, -+ 2.93900948769175320138e-05, -+ 1.44524235407680616859e-05, -+-4.31595449223615991972e-07, -+-1.52545021735661563586e-05, -+-3.00088987191676871767e-05, -+-4.46874527685018162865e-05, -+-5.92829011400601544354e-05, -+-7.37880532784749535325e-05, -+-8.81957946927382018627e-05, -+-1.02499090340838023227e-04, -+-1.16690987959360069175e-04, -+-1.30764621336392747363e-04, -+-1.44713213526426610466e-04, -+-1.58530080005720515508e-04, -+-1.72208631766646892702e-04, -+-1.85742378349807455221e-04, -+-1.99124930812504506716e-04, -+-2.12350004632196330849e-04, -+-2.25411422543850048289e-04, -+-2.38303117309836905331e-04, -+-2.51019134421297284484e-04, -+-2.63553634729709143104e-04, -+-2.75900897007725623075e-04, -+-2.88055320438154207046e-04, -+-3.00011427029988502792e-04, -+-3.11763863960725555544e-04, -+-3.23307405843803333592e-04, -+-3.34636956920517840506e-04, -+-3.45747553175349475393e-04, -+-3.56634364374105745227e-04, -+-3.67292696023986241921e-04, -+-3.77717991254969290369e-04, -+-3.87905832621729396159e-04, -+-3.97851943825608877700e-04, -+-4.07552191355998907722e-04, -+-4.17002586050548289687e-04, -+-4.26199284573830689850e-04, -+-4.35138590813964924123e-04, -+-4.43816957196747625784e-04, -+-4.52230985917061883723e-04, -+-4.60377430087148228118e-04, -+-4.68253194801565195918e-04, -+-4.75855338118517359660e-04, -+-4.83181071957494603746e-04, -+-4.90227762913035460673e-04, -+-4.96992932984516386924e-04, -+-5.03474260221955485957e-04, -+-5.09669579287852308157e-04, -+-5.15576881935093001182e-04, -+-5.21194317400982664451e-04, -+-5.26520192717613616691e-04, -+-5.31552972938706402850e-04, -+-5.36291281283125418830e-04, -+-5.40733899195399727276e-04, -+-5.44879766323496587781e-04, -+-5.48727980414253735213e-04, -+-5.52277797126791330021e-04, -+-5.55528629764419335478e-04, -+-5.58480048925468798571e-04, -+-5.61131782073551080119e-04, -+-5.63483713027851970505e-04, -+-5.65535881373998238451e-04, -+-5.67288481796187900146e-04, -+-5.68741863331195915583e-04, -+-5.69896528545036479795e-04, -+-5.70753132632961161612e-04, -+-5.71312482443646482352e-04, -+-5.71575535428334754844e-04, -+-5.71543398515829263219e-04, -+-5.71217326914227299835e-04, -+-5.70598722840296476537e-04, -+-5.69689134177503594091e-04, -+-5.68490253063648432949e-04, -+-5.67003914409159020388e-04, -+-5.65232094347102977452e-04, -+-5.63176908616005544687e-04, -+-5.60840610876602073745e-04, -+-5.58225590963675973900e-04, -+-5.55334373074175820066e-04, -+-5.52169613892796438438e-04, -+-5.48734100656311134595e-04, -+-5.45030749157866334711e-04, -+-5.41062601692576870642e-04, -+-5.36832824945712001018e-04, -+-5.32344707824832300003e-04, -+-5.27601659237243400015e-04, -+-5.22607205814143416754e-04, -+-5.17364989582876229866e-04, -+-5.11878765588764158417e-04, -+-5.06152399467916375153e-04, -+-5.00189864972510559588e-04, -+-4.93995241450078683386e-04, -+-4.87572711278240109554e-04, -+-4.80926557256444178138e-04, -+-4.74061159956301635728e-04, -+-4.66980995031984519490e-04, -+-4.59690630492344271939e-04, -+-4.52194723936275402073e-04, -+-4.44498019752993822097e-04, -+-4.36605346288767746325e-04, -+-4.28521612981757975790e-04, -+-4.20251807466636860457e-04, -+-4.11800992650551039072e-04, -+-4.03174303762152705464e-04, -+-3.94376945375264067670e-04, -+-3.85414188409003615268e-04, -+-3.76291367105835428391e-04, -+-3.67013875989376269545e-04, -+-3.57587166803538351878e-04, -+-3.48016745434793248019e-04, -+-3.38308168819116130647e-04, -+-3.28467041835364367049e-04, -+-3.18499014186804374482e-04, -+-3.08409777272385283997e-04, -+-2.98205061049476030047e-04, -+-2.87890630889810130322e-04, -+-2.77472284430191329634e-04, -+-2.66955848419733049459e-04, -+-2.56347175565217071970e-04, -+-2.45652141376338599681e-04, -+-2.34876641012365765249e-04, -+-2.24026586131914569105e-04, -+-2.13107901747536509227e-04, -+-2.02126523086630768746e-04, -+-1.91088392460356650080e-04, -+-1.79999456142178738786e-04, -+-1.68865661257607132476e-04, -+-1.57692952686686938598e-04, -+-1.46487269980864699605e-04, -+-1.35254544295716316437e-04, -+-1.24000695341184972607e-04, -+-1.12731628350718165836e-04, -+-1.01453231070878122327e-04, -+-9.01713707729724520340e-05, -+-7.88918912880573160781e-05, -+-6.76206100668247551966e-05, -+-5.63633152658752571273e-05, -+-4.51257628616542845251e-05, -+-3.39136737935608547517e-05, -+-2.27327311375149941554e-05, -+-1.15885773114489628905e-05, -+-4.86811313915871210201e-07, -+ 1.05670140028143166991e-05, -+ 2.15673946238210968425e-05, -+ 3.25088780256781116596e-05, -+ 4.33860657922279085714e-05, -+ 5.41936161910015515536e-05, -+ 6.49262467088870516650e-05, -+ 7.55787365460706083136e-05, -+ 8.61459290670060090240e-05, -+ 9.66227342073920110596e-05, -+ 1.07004130835977286562e-04, -+ 1.17285169070277186945e-04, -+ 1.27460972545122102045e-04, -+ 1.37526740632994235337e-04, -+ 1.47477750615313961575e-04, -+ 1.57309359803685470123e-04, -+ 1.67017007610150564068e-04, -+ 1.76596217565703518526e-04, -+ 1.86042599286130139018e-04, -+ 1.95351850384440511605e-04, -+ 2.04519758329024586505e-04, -+ 2.13542202246907178919e-04, -+ 2.22415154671328456478e-04, -+ 2.31134683232958544662e-04, -+ 2.39696952294124378952e-04, -+ 2.48098224525461843754e-04, -+ 2.56334862424394095085e-04, -+ 2.64403329774836909783e-04, -+ 2.72300193047718441016e-04, -+ 2.80022122741781036813e-04, -+ 2.87565894664178829838e-04, -+ 2.94928391150552234555e-04, -+ 3.02106602224121655823e-04, -+ 3.09097626693513312206e-04, -+ 3.15898673188933149566e-04, -+ 3.22507061136495965393e-04, -+ 3.28920221670429965485e-04, -+ 3.35135698482898333403e-04, -+ 3.41151148611357961198e-04, -+ 3.46964343163231182625e-04, -+ 3.52573167977838467131e-04, -+ 3.57975624225448146778e-04, -+ 3.63169828943500801448e-04, -+ 3.68154015509882480677e-04, -+ 3.72926534053389822573e-04, -+ 3.77485851801332371845e-04, -+ 3.81830553364452182901e-04, -+ 3.85959340959241372672e-04, -+ 3.89871034567797159973e-04, -+ 3.93564572035445218046e-04, -+ 3.97039009106330996121e-04, -+ 4.00293519397200458273e-04, -+ 4.03327394309708944353e-04, -+ 4.06140042881526601437e-04, -+ 4.08730991576614218711e-04, -+ 4.11099884015009905264e-04, -+ 4.13246480642570374747e-04, -+ 4.15170658341088754176e-04, -+ 4.16872409979225850337e-04, -+ 4.18351843904797517006e-04, -+ 4.19609183378898695574e-04, -+ 4.20644765952442063056e-04, -+ 4.21459042785672199482e-04, -+ 4.22052577911266981522e-04, -+ 4.22426047441667507944e-04, -+ 4.22580238721291740270e-04, -+ 4.22516049424304497659e-04, -+ 4.22234486598678352993e-04, -+ 4.21736665657268593004e-04, -+ 4.21023809316662376602e-04, -+ 4.20097246484596811584e-04, -+ 4.18958411096749831423e-04, -+ 4.17608840903733937334e-04, -+ 4.16050176209156481050e-04, -+ 4.14284158559614175323e-04, -+ 4.12312629387525297810e-04, -+ 4.10137528607722027553e-04, -+ 4.07760893168739989995e-04, -+ 4.05184855559753253750e-04, -+ 4.02411642274163466621e-04, -+ 3.99443572230806823956e-04, -+ 3.96283055153818239771e-04, -+ 3.92932589912160215497e-04, -+ 3.89394762819913727372e-04, -+ 3.85672245898332176350e-04, -+ 3.81767795100792530199e-04, -+ 3.77684248501704115941e-04, -+ 3.73424524450519546449e-04, -+ 3.68991619691936916479e-04, -+ 3.64388607453439920380e-04, -+ 3.59618635501351871335e-04, -+ 3.54684924166520241986e-04, -+ 3.49590764340821041987e-04, -+ 3.44339515445693598438e-04, -+ 3.38934603373838513624e-04, -+ 3.33379518405329915154e-04, -+ 3.27677813099311473176e-04, -+ 3.21833100162536569697e-04, -+ 3.15849050295926377270e-04, -+ 3.09729390020389752213e-04, -+ 3.03477899483178554640e-04, -+ 2.97098410245953236785e-04, -+ 2.90594803055835239260e-04, -+ 2.83971005600701430303e-04, -+ 2.77230990249963083708e-04, -+ 2.70378771782053405493e-04, -+ 2.63418405099919501929e-04, -+ 2.56353982935728650153e-04, -+ 2.49189633546102382294e-04, -+ 2.41929518399063687127e-04, -+ 2.34577829853976687832e-04, -+ 2.27138788835770893786e-04, -+ 2.19616642504623810770e-04, -+ 2.12015661922379533436e-04, -+ 2.04340139716986798554e-04, -+ 1.96594387746109900425e-04, -+ 1.88782734761210285561e-04, -+ 1.80909524073276134666e-04, -+ 1.72979111221486337802e-04, -+ 1.64995861645938764022e-04, -+ 1.56964148365684399598e-04, -+ 1.48888349663314485498e-04, -+ 1.40772846777168322190e-04, -+ 1.32622021602487612625e-04, -+ 1.24440254402532454779e-04, -+ 1.16231921530969174315e-04, -+ 1.08001393166544268506e-04, -+ 9.97530310612700842022e-05, -+ 9.14911863031805467012e-05, -+ 8.32201970948494534723e-05, -+ 7.49443865486733659534e-05, -+ 6.66680605000458429647e-05, -+ 5.83955053395394390486e-05, -+ 5.01309858650572228258e-05, -+ 4.18787431550387222699e-05, -+ 3.36429924637896997147e-05, -+ 2.54279211398450498503e-05, -+ 1.72376865684373168860e-05, -+ 9.07641413898224680109e-06, -+ 9.48195238618905657624e-07, -+-7.14291472735570851774e-06, -+-1.51928982871868691030e-05, -+-2.31977778255819772578e-05, -+-3.11536174769894797995e-05, -+-3.90565249883959565128e-05, -+-4.69026535507838503733e-05, -+-5.46882035983796400101e-05, -+-6.24094245749816497679e-05, -+-7.00626166665431140837e-05, -+-7.76441324992083051551e-05, -+-8.51503788021582837904e-05, -+-9.25778180344744060573e-05, -+-9.99229699753842974660e-05, -+-1.07182413277143970569e-04, -+-1.14352786980001299723e-04, -+-1.21430791988570707662e-04, -+-1.28413192508978856029e-04, -+-1.35296817446291592216e-04, -+-1.42078561761593261028e-04, -+-1.48755387788243690359e-04, -+-1.55324326506731677858e-04, -+-1.61782478777755279195e-04, -+-1.68127016532938305905e-04, -+-1.74355183922886855866e-04, -+-1.80464298422043775347e-04, -+-1.86451751890066126042e-04, -+-1.92315011589316994193e-04, -+-1.98051621158110087483e-04, -+-2.03659201539461954481e-04, -+-2.09135451865034778822e-04, -+-2.14478150293975007752e-04, -+-2.19685154806484236054e-04, -+-2.24754403951855035284e-04, -+-2.29683917550825442361e-04, -+-2.34471797352042666748e-04, -+-2.39116227642561802579e-04, -+-2.43615475812239792083e-04, -+-2.47967892871911476695e-04, -+-2.52171913925349226639e-04, -+-2.56226058594915238626e-04, -+-2.60128931400936235906e-04, -+-2.63879222094777748236e-04, -+-2.67475705945676030771e-04, -+-2.70917243981398745550e-04, -+-2.74202783182808239749e-04, -+-2.77331356632420174182e-04, -+-2.80302083617130378106e-04, -+-2.83114169685247407150e-04, -+-2.85766906657990832612e-04, -+-2.88259672595703273380e-04, -+-2.90591931718978374165e-04, -+-2.92763234284938700901e-04, -+-2.94773216418979381367e-04, -+-2.96621599902229947550e-04, -+-2.98308191915087070681e-04, -+-2.99832884737117537181e-04, -+-3.01195655403731915589e-04, -+-3.02396565319990604306e-04, -+-3.03435759831933548735e-04, -+-3.04313467755884059594e-04, -+-3.05030000866147890746e-04, -+-3.05585753341585221812e-04, -+-3.05981201171519584091e-04, -+-3.06216901521509134165e-04, -+-3.06293492059487573384e-04, -+-3.06211690242816218007e-04, -+-3.05972292566802656771e-04, -+-3.05576173775270109809e-04, -+-3.05024286033762090722e-04, -+-3.04317658065994024481e-04, -+-3.03457394254183585730e-04, -+-3.02444673703895100005e-04, -+-3.01280749274062569550e-04, -+-2.99966946572861902810e-04, -+-2.98504662920123960135e-04, -+-2.96895366276984148252e-04, -+-2.95140594143503544149e-04, -+-2.93241952424972839204e-04, -+-2.91201114267648395687e-04, -+-2.89019818864694969657e-04, -+-2.86699870233074851408e-04, -+-2.84243135962187955679e-04, -+-2.81651545935045764021e-04, -+-2.78927091022785277833e-04, -+-2.76071821753329086409e-04, -+-2.73087846955029312987e-04, -+-2.69977332376105608885e-04, -+-2.66742499280753122669e-04, -+-2.63385623022735818576e-04, -+-2.59909031597333319095e-04, -+-2.56315104172533353259e-04, -+-2.52606269600299821604e-04, -+-2.48785004908817504021e-04, -+-2.44853833776614545140e-04, -+-2.40815324989414303834e-04, -+-2.36672090880646487053e-04, -+-2.32426785756489917047e-04, -+-2.28082104306388832628e-04, -+-2.23640779999901656528e-04, -+-2.19105583470820145051e-04, -+-2.14479320889489653368e-04, -+-2.09764832324187768019e-04, -+-2.04964990092551698191e-04, -+-2.00082697103893516945e-04, -+-1.95120885193399471553e-04, -+-1.90082513449059745374e-04, -+-1.84970566532296863812e-04, -+-1.79788052993171517313e-04, -+-1.74538003581126675585e-04, -+-1.69223469552129467206e-04, -+-1.63847520973145840571e-04, -+-1.58413245024881097671e-04, -+-1.52923744303641519389e-04, -+-1.47382135123237027838e-04, -+-1.41791545817854290970e-04, -+-1.36155115046730930926e-04, -+-1.30475990101566258683e-04, -+-1.24757325217510580588e-04, -+-1.19002279888661194524e-04, -+-1.13214017188868415280e-04, -+-1.07395702098746854882e-04, -+-1.01550499839754549119e-04, -+-9.56815742161736681884e-05, -+-8.97920859658150297307e-05, -+-8.38851911202858713332e-05, -+-7.79640393756770905178e-05, -+-7.20317724744152869908e-05, -+-6.60915225991128571850e-05, -+-6.01464107792394842228e-05, -+-5.41995453113256703899e-05, -+-4.82540201935260191645e-05, -+-4.23129135752554075560e-05, -+-3.63792862227040107682e-05, -+-3.04561800008946262114e-05, -+-2.45466163730380569304e-05, -+-1.86535949179281487331e-05, -+-1.27800918660038342780e-05, -+-6.92905865481930068159e-06, -+-1.10342050454853296994e-06, -+ 4.69392498575835322107e-06, -+ 1.04601092206202085443e-05, -+ 1.61922939685309686330e-05, -+ 2.18876726998310187900e-05, -+ 2.75434719013333585431e-05, -+ 3.31569523672128619587e-05, -+ 3.87254104655551669952e-05, -+ 4.42461793799820151014e-05, -+ 4.97166303258813707623e-05, -+ 5.51341737406907975117e-05, -+ 6.04962604476992873623e-05, -+ 6.58003827929482047439e-05, -+ 7.10440757547033927043e-05, -+ 7.62249180250887078177e-05, -+ 8.13405330633888576592e-05, -+ 8.63885901206668644324e-05, -+ 9.13668052352641340674e-05, -+ 9.62729421987680101039e-05, -+ 1.01104813492143344174e-04, -+ 1.05860281191625613681e-04, -+ 1.10537257844079884095e-04, -+ 1.15133707311478630493e-04, -+ 1.19647645584220456037e-04, -+ 1.24077141563022885209e-04, -+ 1.28420317809117991549e-04, -+ 1.32675351262483061940e-04, -+ 1.36840473927932757339e-04, -+ 1.40913973528841685815e-04, -+ 1.44894194128284206635e-04, -+ 1.48779536717473748154e-04, -+ 1.52568459771325131390e-04, -+ 1.56259479770980684197e-04, -+ 1.59851171693240460712e-04, -+ 1.63342169466755023468e-04, -+ 1.66731166394932026195e-04, -+ 1.70016915545461323039e-04, -+ 1.73198230106457167626e-04, -+ 1.76273983709174160992e-04, -+ 1.79243110717270954634e-04, -+ 1.82104606482673126973e-04, -+ 1.84857527568029053264e-04, -+ 1.87500991935841927272e-04, -+ 1.90034179104279262861e-04, -+ 1.92456330269822776862e-04, -+ 1.94766748396794513220e-04, -+ 1.96964798273908584360e-04, -+ 1.99049906537954266611e-04, -+ 2.01021561664790589848e-04, -+ 2.02879313927801336551e-04, -+ 2.04622775323984274973e-04, -+ 2.06251619467897348657e-04, -+ 2.07765581453663538119e-04, -+ 2.09164457685255029832e-04, -+ 2.10448105675328230946e-04, -+ 2.11616443812851108683e-04, -+ 2.12669451099812634523e-04, -+ 2.13607166857295168675e-04, -+ 2.14429690401230681543e-04, -+ 2.15137180688158456340e-04, -+ 2.15729855931309154023e-04, -+ 2.16207993187385875055e-04, -+ 2.16571927914393662145e-04, -+ 2.16822053500895369719e-04, -+ 2.16958820767090094714e-04, -+ 2.16982737438119145310e-04, -+ 2.16894367590011544417e-04, -+ 2.16694331068704375103e-04, -+ 2.16383302882573573273e-04, -+ 2.15962012568937173273e-04, -+ 2.15431243534988864970e-04, -+ 2.14791832373643112571e-04, -+ 2.14044668154778804569e-04, -+ 2.13190691692375993652e-04, -+ 2.12230894788062836786e-04, -+ 2.11166319451582256295e-04, -+ 2.09998057098713050445e-04, -+ 2.08727247727178962314e-04, -+ 2.07355079071098812689e-04, -+ 2.05882785734526249080e-04, -+ 2.04311648304645308329e-04, -+ 2.02642992445200404404e-04, -+ 2.00878187970725529407e-04, -+ 1.99018647902181230460e-04, -+ 1.97065827504565370225e-04, -+ 1.95021223307131414326e-04, -+ 1.92886372106789062567e-04, -+ 1.90662849955323298245e-04, -+ 1.88352271131035512233e-04, -+ 1.85956287095443860338e-04, -+ 1.83476585435658924713e-04, -+ 1.80914888793067202884e-04, -+ 1.78272953778979965879e-04, -+ 1.75552569877858596036e-04, -+ 1.72755558338776385452e-04, -+ 1.69883771055775014205e-04, -+ 1.66939089437739287235e-04, -+ 1.63923423268464666259e-04, -+ 1.60838709557554023410e-04, -+ 1.57686911382826176059e-04, -+ 1.54470016724860052760e-04, -+ 1.51190037294350436165e-04, -+ 1.47849007352938516474e-04, -+ 1.44448982528168725411e-04, -+ 1.40992038623224621736e-04, -+ 1.37480270422103131650e-04, -+ 1.33915790490908510934e-04, -+ 1.30300727975883427756e-04, -+ 1.26637227398848910710e-04, -+ 1.22927447450726668463e-04, -+ 1.19173559783751544113e-04, -+ 1.15377747803056433318e-04, -+ 1.11542205458248867627e-04, -+ 1.07669136035655032668e-04, -+ 1.03760750951825973841e-04, -+ 9.98192685489614168559e-05, -+ 9.58469128929003691322e-05, -+ 9.18459125742597699837e-05, -+ 8.78184995133790156831e-05, -+ 8.37669077696560454268e-05, -+ 7.96933723559265666005e-05, -+ 7.56001280584259725565e-05, -+ 7.14894082630083944159e-05, -+ 6.73634437881340204573e-05, -+ 6.32244617252882825861e-05, -+ 5.90746842873461779663e-05, -+ 5.49163276654787824009e-05, -+ 5.07516008951872145687e-05, -+ 4.65827047319741682405e-05, -+ 4.24118305372229097931e-05, -+ 3.82411591748462793188e-05, -+ 3.40728599191875283292e-05, -+ 2.99090893747361998109e-05, -+ 2.57519904081409751117e-05, -+ 2.16036910930649429937e-05, -+ 1.74663036683280136440e-05, -+ 1.33419235098453462380e-05, -+ 9.23262811685928130563e-06, -+ 5.14047611288089638620e-06, -+ 1.06750626183722631479e-06, -+-2.98426350016022994691e-06, -+-7.01283701696614740918e-06, -+-1.10162408480615069031e-05, -+-1.49925251873214083662e-05, -+-1.89397647644820879499e-05, -+-2.28560597288927702187e-05, -+-2.67395365152196406880e-05, -+-3.05883486907130078530e-05, -+-3.44006777836602540958e-05, -+-3.81747340927275210175e-05, -+-4.19087574768357373853e-05, -+-4.56010181252311126428e-05, -+-4.92498173074900873615e-05, -+-5.28534881031252298821e-05, -+-5.64103961105393312886e-05, -+-5.99189401350206662131e-05, -+-6.33775528555675324869e-05, -+-6.67847014702764807609e-05, -+-7.01388883200425772204e-05, -+-7.34386514903965126506e-05, -+-7.66825653912348156535e-05, -+-7.98692413142890845568e-05, -+-8.29973279680875074835e-05, -+-8.60655119903289004060e-05, -+-8.90725184374467171371e-05, -+-9.20171112512619700620e-05, -+-9.48980937025603441979e-05, -+-9.77143088115187759442e-05, -+-1.00464639744859388255e-04, -+-1.03148010189625194497e-04, -+-1.05763384703536859194e-04, -+-1.08309769041847384465e-04, -+-1.10786210460631133696e-04, -+-1.13191797996501934058e-04, -+-1.15525662722708351705e-04, -+-1.17786977981613268270e-04, -+-1.19974959593534190815e-04, -+-1.22088866041986484267e-04, -+-1.24127998635342794240e-04, -+-1.26091701644931496271e-04, -+-1.27979362419654144924e-04, -+-1.29790411477168272404e-04, -+-1.31524322571708625470e-04, -+-1.33180612738637493483e-04, -+-1.34758842315833984394e-04, -+-1.36258614942015598460e-04, -+-1.37679577532133398362e-04, -+-1.39021420229953017716e-04, -+-1.40283876337992947491e-04, -+-1.41466722224963323403e-04, -+-1.42569777210869091466e-04, -+-1.43592903429972301504e-04, -+-1.44536005671797138268e-04, -+-1.45399031200369268681e-04, -+-1.46181969551921958151e-04, -+-1.46884852311272975705e-04, -+-1.47507752867118645777e-04, -+-1.48050786146473433835e-04, -+-1.48514108328523704045e-04, -+-1.48897916538148837292e-04, -+-1.49202448519377127998e-04, -+-1.49427982289073205905e-04, -+-1.49574835771129388594e-04, -+-1.49643366411473540236e-04, -+-1.49633970774193841890e-04, -+-1.49547084119100584043e-04, -+-1.49383179961047775483e-04, -+-1.49142769611348204603e-04, -+-1.48826401701621687922e-04, -+-1.48434661690425537565e-04, -+-1.47968171353023028678e-04, -+-1.47427588254649171362e-04, -+-1.46813605207650059491e-04, -+-1.46126949712865211208e-04, -+-1.45368383385638768636e-04, -+-1.44538701366849164877e-04, -+-1.43638731719351636813e-04, -+-1.42669334810229859632e-04, -+-1.41631402679272359055e-04, -+-1.40525858394075560832e-04, -+-1.39353655392192250567e-04, -+-1.38115776810750613777e-04, -+-1.36813234803965936073e-04, -+-1.35447069848972789655e-04, -+-1.34018350040412986173e-04, -+-1.32528170374222436503e-04, -+-1.30977652021046207277e-04, -+-1.29367941589733019114e-04, -+-1.27700210381360810966e-04, -+-1.25975653634228948810e-04, -+-1.24195489760284478228e-04, -+-1.22360959573421820921e-04, -+-1.20473325510130619526e-04, -+-1.18533870842929396042e-04, -+-1.16543898887054415644e-04, -+-1.14504732200871589131e-04, -+-1.12417711780453782031e-04, -+-1.10284196248804102999e-04, -+-1.08105561040170155152e-04, -+-1.05883197579935365976e-04, -+-1.03618512460517512327e-04, -+-1.01312926613771452371e-04, -+-9.89678744803231588006e-05, -+-9.65848031763287176834e-05, -+-9.41651716580904694746e-05, -+-9.17104498849975562341e-05, -+-8.92221179812627604834e-05, -+-8.67016653968825132086e-05, -+-8.41505900682881210822e-05, -+-8.15703975791493105397e-05, -+-7.89626003217504745472e-05, -+-7.63287166594104368560e-05, -+-7.36702700903663770804e-05, -+-7.09887884135877711683e-05, -+-6.82858028969257033506e-05, -+-6.55628474480432515319e-05, -+-6.28214577885690295556e-05, -+-6.00631706318681429140e-05, -+-5.72895228648756703262e-05, -+-5.45020507343892520119e-05, -+-5.17022890382489225453e-05, -+-4.88917703218011553620e-05, -+-4.60720240800406300981e-05, -+-4.32445759658305523042e-05, -+-4.04109470046085756875e-05, -+-3.75726528159311059401e-05, -+-3.47312028422512456081e-05, -+-3.18880995853173453093e-05, -+-2.90448378505280945666e-05, -+-2.62029039996194488388e-05, -+-2.33637752120533564114e-05, -+-2.05289187554215721418e-05, -+-1.76997912652334544591e-05, -+-1.48778380343994300278e-05, -+-1.20644923127652564947e-05, -+-9.26117461698225729130e-06, -+-6.46929205104167329041e-06, -+-3.69023763779291335841e-06, -+-9.25389661709245930119e-07, -+ 1.82388897678174475935e-06, -+ 4.55625139514285705999e-06, -+ 7.27036735044587330100e-06, -+ 9.96492384873170706833e-06, -+ 1.26386257417392112551e-05, -+ 1.52901963107384078629e-05, -+ 1.79183778372582360025e-05, -+ 2.05219321604610694255e-05, -+ 2.30996412209251530034e-05, -+ 2.56503075906517305266e-05, -+ 2.81727549890619002719e-05, -+ 3.06658287848128515438e-05, -+ 3.31283964832040277388e-05, -+ 3.55593481990333369126e-05, -+ 3.79575971147140200598e-05, -+ 4.03220799234941648030e-05, -+ 4.26517572576077638367e-05, -+ 4.49456141012434531802e-05, -+ 4.72026601881682524812e-05, -+ 4.94219303839001843038e-05, -+ 5.16024850522865696258e-05, -+ 5.37434104064078973302e-05, -+ 5.58438188436953509251e-05, -+ 5.79028492651570688234e-05, -+ 5.99196673786599580684e-05, -+ 6.18934659861721192748e-05, -+ 6.38234652549182388762e-05, -+ 6.57089129723729151135e-05, -+ 6.75490847850720971908e-05, -+ 6.93432844211934012709e-05, -+ 7.10908438968675459669e-05, -+ 7.27911237062255626245e-05, -+ 7.44435129951590121491e-05, -+ 7.60474297187843856823e-05, -+ 7.76023207826402985129e-05, -+ 7.91076621676173416964e-05, -+ 8.05629590386577253093e-05, -+ 8.19677458372435649003e-05, -+ 8.33215863577352583002e-05, -+ 8.46240738076027652209e-05, -+ 8.58748308515986194002e-05, -+ 8.70735096399619166833e-05, -+ 8.82197918207153089585e-05, -+ 8.93133885361372406803e-05, -+ 9.03540404035136604684e-05, -+ 9.13415174802592236660e-05, -+ 9.22756192135239819386e-05, -+ 9.31561743743901176599e-05, -+ 9.39830409767967284683e-05, -+ 9.47561061813165863036e-05, -+ 9.54752861839191087042e-05, -+ 9.61405260898756268200e-05, -+ 9.67517997729504849579e-05, -+ 9.73091097200465650948e-05, -+ 9.78124868614685578656e-05, -+ 9.82619903869737118746e-05, -+ 9.86577075477993088205e-05, -+ 9.89997534448505824923e-05, -+ 9.92882708032377870244e-05, -+ 9.95234297333714079334e-05, -+ 9.97054274788150226867e-05, -+ 9.98344881511112553288e-05, -+ 9.99108624517949686465e-05, -+ 9.99348273818228400017e-05, -+ 9.99066859386446587009e-05, -+ 9.98267668011501124433e-05, -+ 9.96954240027345068914e-05, -+ 9.95130365927253445271e-05, -+ 9.92800082864197933671e-05, -+ 9.89967671039888494865e-05, -+ 9.86637649985053661076e-05, -+ 9.82814774733607114231e-05, -+ 9.78504031893375142773e-05, -+ 9.73710635616093991710e-05, -+ 9.68440023469432334675e-05, -+ 9.62697852213858742314e-05, -+ 9.56489993487133770321e-05, -+ 9.49822529399337749968e-05, -+ 9.42701748041285732824e-05, -+ 9.35134138909305995691e-05, -+ 9.27126388249273401896e-05, -+ 9.18685374322917528561e-05, -+ 9.09818162599413001162e-05, -+ 9.00532000875254733281e-05, -+ 8.90834314325462917842e-05, -+ 8.80732700489246370709e-05, -+ 8.70234924193121910140e-05, -+ 8.59348912414666484460e-05, -+ 8.48082749089950011304e-05, -+ 8.36444669867888660050e-05, -+ 8.24443056814470995493e-05, -+ 8.12086433070261377561e-05, -+ 7.99383457464084788138e-05, -+ 7.86342919086182418845e-05, -+ 7.72973731824044141140e-05, -+ 7.59284928863964466827e-05, -+ 7.45285657161542757073e-05, -+ 7.30985171884366598380e-05, -+ 7.16392830829906657707e-05, -+ 7.01518088821840928807e-05, -+ 6.86370492088033058069e-05, -+ 6.70959672623157418921e-05, -+ 6.55295342539230995203e-05, -+ 6.39387288407061954269e-05, -+ 6.23245365591873072856e-05, -+ 6.06879492586022889272e-05, -+ 5.90299645341966667546e-05, -+ 5.73515851608610711097e-05, -+ 5.56538185273922726215e-05, -+ 5.39376760716902238437e-05, -+ 5.22041727171985520334e-05, -+ 5.04543263108674547410e-05, -+ 4.86891570629490461476e-05, -+ 4.69096869889039770705e-05, -+ 4.51169393537250871997e-05, -+ 4.33119381189441731090e-05, -+ 4.14957073926132242688e-05, -+ 3.96692708825496971343e-05, -+ 3.78336513531005402778e-05, -+ 3.59898700857156045134e-05, -+ 3.41389463435847715115e-05, -+ 3.22818968406223129981e-05, -+ 3.04197352150379130334e-05, -+ 2.85534715077610400016e-05, -+ 2.66841116459819329256e-05, -+ 2.48126569320371454517e-05, -+ 2.29401035378939945552e-05, -+ 2.10674420054833346785e-05, -+ 1.91956567530948109463e-05, -+ 1.73257255880832701685e-05, -+ 1.54586192260933851384e-05, -+ 1.35953008170508304306e-05, -+ 1.17367254781075038266e-05, -+ 9.88383983376396622401e-06, -+ 8.03758156337068200962e-06, -+ 6.19887895622111748366e-06, -+ 4.36865047440966400299e-06, -+ 2.54780432366209949829e-06, -+ 7.37238032308926373124e-07, -+-1.06216196140181903275e-06, -+-2.84952071350109670505e-06, -+-4.62397516982719811819e-06, -+-6.38467455271440543276e-06, -+-8.13078073870770317037e-06, -+-9.86146862713564825958e-06, -+-1.15759264994108745933e-05, -+-1.32733563689023272133e-05, -+-1.49529743212684799525e-05, -+-1.66140108451148118640e-05, -+-1.82557111528464673220e-05, -+-1.98773354916211406247e-05, -+-2.14781594442844695424e-05, -+-2.30574742201769104257e-05, -+-2.46145869357362549322e-05, -+-2.61488208847895399478e-05, -+-2.76595157984633117411e-05, -+-2.91460280946186709296e-05, -+-3.06077311167595817127e-05, -+-3.20440153623401097595e-05, -+-3.34542887004032530218e-05, -+-3.48379765785163355760e-05, -+-3.61945222189482393904e-05, -+-3.75233868040389463073e-05, -+-3.88240496507459911801e-05, -+-4.00960083743247562354e-05, -+-4.13387790411311751020e-05, -+-4.25518963105175459442e-05, -+-4.37349135658282231866e-05, -+-4.48874030344820757594e-05, -+-4.60089558971416373264e-05, -+-4.70991823859845203494e-05, -+-4.81577118720843649186e-05, -+-4.91841929419274583989e-05, -+-5.01782934630889257735e-05, -+-5.11397006390924718810e-05, -+-5.20681210535034743074e-05, -+-5.29632807032923507936e-05, -+-5.38249250215106612256e-05, -+-5.46528188893461618547e-05, -+-5.54467466376069967565e-05, -+-5.62065120377057097340e-05, -+-5.69319382822057842072e-05, -+-5.76228679550160513534e-05, -+-5.82791629913088267694e-05, -+-5.89007046272428875285e-05, -+-5.94873933395923440545e-05, -+-6.00391487753712058541e-05, -+-6.05559096715516123285e-05, -+-6.10376337649892107507e-05, -+-6.14842976926593108057e-05, -+-6.18958968823238233226e-05, -+-6.22724454337409338497e-05, -+-6.26139759905511322129e-05, -+-6.29205396029612726468e-05, -+-6.31922055813587270996e-05, -+-6.34290613409973911456e-05, -+-6.36312122378911084342e-05, -+-6.37987813960626292450e-05, -+-6.39319095262928170339e-05, -+-6.40307547365266211065e-05, -+-6.40954923340890131856e-05, -+-6.41263146198697370432e-05, -+-6.41234306746411955895e-05, -+-6.40870661376762528177e-05, -+-6.40174629778308577552e-05, -+-6.39148792572699500983e-05, -+-6.37795888880064606964e-05, -+-6.36118813814352140369e-05, -+-6.34120615910403414867e-05, -+-6.31804494484613599157e-05, -+-6.29173796931019454690e-05, -+-6.26232015954722085176e-05, -+-6.22982786744524704445e-05, -+-6.19429884086736173409e-05, -+-6.15577219422070999163e-05, -+-6.11428837847619450737e-05, -+-6.06988915065878725514e-05, -+-6.02261754282833389803e-05, -+-5.97251783057105978649e-05, -+-5.91963550102224186499e-05, -+-5.86401722044022619997e-05, -+-5.80571080135254614690e-05, -+-5.74476516929463732093e-05, -+-5.68123032916220525477e-05, -+-5.61515733119774190850e-05, -+-5.54659823663211952113e-05, -+-5.47560608300273307289e-05, -+-5.40223484916846797155e-05, -+-5.32653942004291476500e-05, -+-5.24857555106721337967e-05, -+-5.16839983244288007024e-05, -+-5.08606965314631670927e-05, -+-5.00164316474561513313e-05, -+-4.91517924504131009438e-05, -+-4.82673746155130051357e-05, -+-4.73637803486131881954e-05, -+-4.64416180186217908985e-05, -+-4.55015017889379735677e-05, -+-4.45440512481755157082e-05, -+-4.35698910403685871315e-05, -+-4.25796504948757788397e-05, -+-4.15739632561744871879e-05, -+-4.05534669137558035886e-05, -+-3.95188026323245935744e-05, -+-3.84706147824963234157e-05, -+-3.74095505721943694328e-05, -+-3.63362596789495190404e-05, -+-3.52513938832865674302e-05, -+-3.41556067034013181253e-05, -+-3.30495530313091846969e-05, -+-3.19338887706706398895e-05, -+-3.08092704764648499791e-05, -+-2.96763549967042926164e-05, -+-2.85357991163705457791e-05, -+-2.73882592037593264182e-05, -+-2.62343908594002619289e-05, -+-2.50748485677371487745e-05, -+-2.39102853517339171191e-05, -+-2.27413524305865331410e-05, -+-2.15686988806957918462e-05, -+-2.03929713000709965051e-05, -+-1.92148134763324269733e-05, -+-1.80348660584579070906e-05, -+-1.68537662324394557363e-05, -+-1.56721474009943186837e-05, -+-1.44906388674901791041e-05, -+-1.33098655242168735925e-05, -+-1.21304475451532646111e-05, -+-1.09530000833746117339e-05, -+-9.77813297322283117563e-06, -+-8.60645043737828595960e-06, -+-7.43855079896758336784e-06, -+-6.27502619881871961423e-06, -+-5.11646231799598331854e-06, -+-3.96343810572348692644e-06, -+-2.81652551282231002175e-06, -+-1.67628923075757107106e-06, -+-5.43286436407872494914e-07, -+ 5.81933457334323180159e-07, -+ 1.69882904504591760570e-06, -+ 2.80686716623920578712e-06, -+ 3.90552313671397189482e-06, -+ 4.99428097372263609408e-06, -+ 6.07263361485467176461e-06, -+ 7.14008313057028191911e-06, -+ 8.19614093029787374922e-06, -+ 9.24032796203801469698e-06, -+ 1.02721749054007427328e-05, -+ 1.12912223580112092028e-05, -+ 1.22970210152323833412e-05, -+ 1.32891318431440794091e-05, -+ 1.42671262447347562611e-05, -+ 1.52305862192577593330e-05, -+ 1.61791045147036835158e-05, -+ 1.71122847733627428900e-05, -+ 1.80297416704377348772e-05, -+ 1.89311010456723673200e-05, -+ 1.98160000279815890877e-05, -+ 2.06840871530521841883e-05, -+ 2.15350224739038173570e-05, -+ 2.23684776643877086669e-05, -+ 2.31841361156243059649e-05, -+ 2.39816930253700516258e-05, -+ 2.47608554803058473310e-05, -+ 2.55213425312606982502e-05, -+ 2.62628852613713497754e-05, -+ 2.69852268471835885421e-05, -+ 2.76881226127196124491e-05, -+ 2.83713400765207057253e-05, -+ 2.90346589916937132319e-05, -+ 2.96778713789779565021e-05, -+ 3.03007815528719345064e-05, -+ 3.09032061408479746811e-05, -+ 3.14849740956869842052e-05, -+ 3.20459267009823244011e-05, -+ 3.25859175698492306789e-05, -+ 3.31048126368919349237e-05, -+ 3.36024901434722378835e-05, -+ 3.40788406163417342690e-05, -+ 3.45337668396904437789e-05, -+ 3.49671838206697444440e-05, -+ 3.53790187484598781464e-05, -+ 3.57692109469451898635e-05, -+ 3.61377118210646532115e-05, -+ 3.64844847969168087159e-05, -+ 3.68095052556900961707e-05, -+ 3.71127604615011769638e-05, -+ 3.73942494832178994610e-05, -+ 3.76539831103605689643e-05, -+ 3.78919837631567116656e-05, -+ 3.81082853968511798366e-05, -+ 3.83029334003578804196e-05, -+ 3.84759844893473848450e-05, -+ 3.86275065938727009992e-05, -+ 3.87575787406301688963e-05, -+ 3.88662909299569613790e-05, -+ 3.89537440076727901374e-05, -+ 3.90200495318706458425e-05, -+ 3.90653296347647622198e-05, -+ 3.90897168797087779285e-05, -+ 3.90933541134949965766e-05, -+ 3.90763943140510594358e-05, -+ 3.90390004336481431357e-05, -+ 3.89813452377418961383e-05, -+ 3.89036111395635601957e-05, -+ 3.88059900305833037435e-05, -+ 3.86886831069694882507e-05, -+ 3.85519006921667821723e-05, -+ 3.83958620557194456086e-05, -+ 3.82207952284667728518e-05, -+ 3.80269368142381611136e-05, -+ 3.78145317981768458210e-05, -+ 3.75838333518232266695e-05, -+ 3.73351026350875769854e-05, -+ 3.70686085952445174832e-05, -+ 3.67846277630824283257e-05, -+ 3.64834440463398959695e-05, -+ 3.61653485205640830985e-05, -+ 3.58306392175243310777e-05, -+ 3.54796209113175163119e-05, -+ 3.51126049022988697399e-05, -+ 3.47299087989734188192e-05, -+ 3.43318562979863894208e-05, -+ 3.39187769623452468762e-05, -+ 3.34910059980102160423e-05, -+ 3.30488840289914551757e-05, -+ 3.25927568710847293757e-05, -+ 3.21229753043848019326e-05, -+ 3.16398948447075694127e-05, -+ 3.11438755140624220878e-05, -+ 3.06352816103032127987e-05, -+ 3.01144814760946232977e-05, -+ 2.95818472673267157311e-05, -+ 2.90377547211135299580e-05, -+ 2.84825829235031577303e-05, -+ 2.79167140770347614077e-05, -+ 2.73405332682701918481e-05, -+ 2.67544282354346262150e-05, -+ 2.61587891362891606750e-05, -+ 2.55540083163661297088e-05, -+ 2.49404800776966532080e-05, -+ 2.43186004481496464925e-05, -+ 2.36887669515123128053e-05, -+ 2.30513783784305334912e-05, -+ 2.24068345583368003357e-05, -+ 2.17555361324791958683e-05, -+ 2.10978843281734282551e-05, -+ 2.04342807343983282075e-05, -+ 1.97651270788443597626e-05, -+ 1.90908250065320015982e-05, -+ 1.84117758601161542057e-05, -+ 1.77283804619801040644e-05, -+ 1.70410388982337398535e-05, -+ 1.63501503047186065565e-05, -+ 1.56561126551311619623e-05, -+ 1.49593225513600180476e-05, -+ 1.42601750161419401356e-05, -+ 1.35590632881392743862e-05, -+ 1.28563786195291532370e-05, -+ 1.21525100762025804540e-05, -+ 1.14478443406703827613e-05, -+ 1.07427655177589017509e-05, -+ 1.00376549431903564451e-05, -+ 9.33289099512935430329e-06, -+ 8.62884890878591384318e-06, -+ 7.92590059414905157801e-06, -+ 7.22441445693406108369e-06, -+ 6.52475522282227181239e-06, -+ 5.82728376506354903543e-06, -+ 5.13235693551778566856e-06, -+ 4.44032739920081165146e-06, -+ 3.75154347240349402752e-06, -+ 3.06634896445295587704e-06, -+ 2.38508302317038128695e-06, -+ 1.70807998408878326806e-06, -+ 1.03566922349157826689e-06, -+ 3.68175015318385312927e-07, -+-2.94083608003316195796e-07, -+-9.50792990756428532175e-07, -+-1.60164498510903015186e-06, -+-2.24633707822957432882e-06, -+-2.88457251529725585548e-06, -+-3.51606041836507742817e-06, -+-4.14051590104719538038e-06, -+-4.75766017899043685381e-06, -+-5.36722067610390392149e-06, -+-5.96893112651196722918e-06, -+-6.56253167221256118968e-06, -+-7.14776895641407462845e-06, -+-7.72439621252695393942e-06, -+-8.29217334879925126829e-06, -+-8.85086702857723481774e-06, -+-9.40025074617520820593e-06, -+-9.94010489835155732234e-06, -+-1.04702168513777000056e-05, -+-1.09903810036992033189e-05, -+-1.15003988441811452764e-05, -+-1.20000790059446446682e-05, -+-1.24892373157938542529e-05, -+-1.29676968392356399312e-05, -+-1.34352879211056542826e-05, -+-1.38918482218078280619e-05, -+-1.43372227491767596487e-05, -+-1.47712638859842104608e-05, -+-1.51938314131016376365e-05, -+-1.56047925283423453849e-05, -+-1.60040218609994824601e-05, -+-1.63914014821137958761e-05, -+-1.67668209104843766012e-05, -+-1.71301771144641440945e-05, -+-1.74813745095637493407e-05, -+-1.78203249518961361498e-05, -+-1.81469477275017576168e-05, -+-1.84611695375891659296e-05, -+-1.87629244797279366534e-05, -+-1.90521540250400636825e-05, -+-1.93288069914307297748e-05, -+-1.95928395129016073037e-05, -+-1.98442150049985344194e-05, -+-2.00829041264385711751e-05, -+-2.03088847369703611226e-05, -+-2.05221418515166891200e-05, -+-2.07226675906578703594e-05, -+-2.09104611275098419107e-05, -+-2.10855286310533183536e-05, -+-2.12478832059765801270e-05, -+-2.13975448290907599989e-05, -+-2.15345402823791832330e-05, -+-2.16589030827471214040e-05, -+-2.17706734085350807535e-05, -+-2.18698980228635944017e-05, -+-2.19566301938759495123e-05, -+-2.20309296119498917597e-05, -+-2.20928623039478315611e-05, -+-2.21425005445764114633e-05, -+-2.21799227649298888801e-05, -+-2.22052134582895725366e-05, -+-2.22184630832555388114e-05, -+-2.22197679642845197419e-05, -+-2.22092301897129874779e-05, -+-2.21869575073414682510e-05, -+-2.21530632176585956473e-05, -+-2.21076660647849037526e-05, -+-2.20508901252157237687e-05, -+-2.19828646944432693725e-05, -+-2.19037241715403474508e-05, -+-2.18136079417860268177e-05, -+-2.17126602574166129554e-05, -+-2.16010301165839486721e-05, -+-2.14788711406044598715e-05, -+-2.13463414495824367763e-05, -+-2.12036035364909901271e-05, -+-2.10508241397952941727e-05, -+-2.08881741147017592605e-05, -+-2.07158283031179152496e-05, -+-2.05339654024071466103e-05, -+-2.03427678330234534560e-05, -+-2.01424216051101083219e-05, -+-1.99331161841466409333e-05, -+-1.97150443557298639234e-05, -+-1.94884020895712982066e-05, -+-1.92533884027966296513e-05, -+-1.90102052226298810192e-05, -+-1.87590572485473988781e-05, -+-1.85001518139830994003e-05, -+-1.82336987476685074346e-05, -+-1.79599102346913299191e-05, -+-1.76790006773522863739e-05, -+-1.73911865559027042601e-05, -+-1.70966862892450109082e-05, -+-1.67957200956739338487e-05, -+-1.64885098537402634234e-05, -+-1.61752789633142813903e-05, -+-1.58562522069297573337e-05, -+-1.55316556114829399716e-05, -+-1.52017163103647922620e-05, -+-1.48666624061033995360e-05, -+-1.45267228335893107877e-05, -+-1.41821272239584706039e-05, -+-1.38331057692081632425e-05, -+-1.34798890876143142534e-05, -+-1.31227080900243395635e-05, -+-1.27617938470932148766e-05, -+-1.23973774575348411156e-05, -+-1.20296899174529279452e-05, -+-1.16589619908198458004e-05, -+-1.12854240811699317332e-05, -+-1.09093061045693789425e-05, -+-1.05308373639278654549e-05, -+-1.01502464247116462527e-05, -+-9.76776099211927309387e-06, -+-9.38360778978138410360e-06, -+-8.99801244003842426661e-06, -+-8.61119934585468618966e-06, -+-8.22339157442569339263e-06, -+-7.83481074252833694781e-06, -+-7.44567690366960780872e-06, -+-7.05620843708181691813e-06, -+-6.66662193861726721860e-06, -+-6.27713211358587016620e-06, -+-5.88795167158394612084e-06, -+-5.49929122336098261949e-06, -+-5.11135917976332167136e-06, -+-4.72436165279991700163e-06, -+-4.33850235886762889933e-06, -+-3.95398252417811778438e-06, -+-3.57100079241896547341e-06, -+-3.18975313468634483958e-06, -+-2.81043276172503517281e-06, -+-2.43323003850372685734e-06, -+-2.05833240115816176063e-06, -+-1.68592427633299744872e-06, -+-1.31618700294525707091e-06, -+-9.49298756398597503033e-07, -+-5.85434475269598042740e-07, -+-2.24765790491995588430e-07, -+ 1.32539042944795253329e-07, -+ 4.86315211761806101974e-07, -+ 8.36401407601896179804e-07, -+ 1.18263988767470755612e-06, -+ 1.52487653281902728484e-06, -+ 1.86296090296814218483e-06, -+ 2.19674629001149769367e-06, -+ 2.52608976803993208671e-06, -+ 2.85085224096945087408e-06, -+ 3.17089848753367322990e-06, -+ 3.48609720364736703897e-06, -+ 3.79632104212865399887e-06, -+ 4.10144664978819417086e-06, -+ 4.40135470188026015846e-06, -+ 4.69592993391712774085e-06, -+ 4.98506117085352237869e-06, -+ 5.26864135364426027284e-06, -+ 5.54656756317971894038e-06, -+ 5.81874104161062011015e-06, -+ 6.08506721106972112904e-06, -+ 6.34545568979961026893e-06, -+ 6.59982030570251321293e-06, -+ 6.84807910732276385433e-06, -+ 7.09015437227939167509e-06, -+ 7.32597261316240703008e-06, -+ 7.55546458091406095787e-06, -+ 7.77856526571271897894e-06, -+ 7.99521389537842829865e-06, -+ 8.20535393132500495055e-06, -+ 8.40893306208027325446e-06, -+ 8.60590319439752568476e-06, -+ 8.79622044198663719764e-06, -+ 8.97984511188937595011e-06, -+ 9.15674168852855148177e-06, -+ 9.32687881545792753647e-06, -+ 9.49022927484590670408e-06, -+ 9.64676996472301928230e-06, -+ 9.79648187402453286072e-06, -+ 9.93935005546419846816e-06, -+ 1.00753635962716102202e-05, -+ 1.02045155868300701406e-05, -+ 1.03268030872496085793e-05, -+ 1.04422270919149080961e-05, -+ 1.05507924920450241771e-05, -+ 1.06525080363035427313e-05, -+ 1.07473862895008009574e-05, -+ 1.08354435894281464503e-05, -+ 1.09167000018650293508e-05, -+ 1.09911792738028123146e-05, -+ 1.10589087849281107333e-05, -+ 1.11199194974072203387e-05, -+ 1.11742459040198995155e-05, -+ 1.12219259746838584705e-05, -+ 1.12630011014179261237e-05, -+ 1.12975160417893515888e-05, -+ 1.13255188608912239713e-05, -+ 1.13470608718986725231e-05, -+ 1.13621965752502408455e-05, -+ 1.13709835965033970314e-05, -+ 1.13734826229117897745e-05, -+ 1.13697573387741017237e-05, -+ 1.13598743596030994434e-05, -+ 1.13439031651642332040e-05, -+ 1.13219160314340630866e-05, -+ 1.12939879615281848059e-05, -+ 1.12601966156488724434e-05, -+ 1.12206222401028280833e-05, -+ 1.11753475954396282394e-05, -+ 1.11244578837614569632e-05, -+ 1.10680406752547680398e-05, -+ 1.10061858339946508134e-05, -+ 1.09389854430727538072e-05, -+ 1.08665337290993678862e-05, -+ 1.07889269861304655274e-05, -+ 1.07062634990703402997e-05, -+ 1.06186434666001975772e-05, -+ 1.05261689236834371503e-05, -+ 1.04289436636973722826e-05, -+ 1.03270731602417616547e-05, -+ 1.02206644886739122943e-05, -+ 1.01098262474197981978e-05, -+ 9.99466847911029713993e-06, -+ 9.87530259159213775891e-06, -+ 9.75184127886138886650e-06, -+ 9.62439844196833259673e-06, -+ 9.49308910994118403798e-06, -+ 9.35802936077670613891e-06, -+ 9.21933624254407122552e-06, -+ 9.07712769464878633412e-06, -+ 8.93152246930307774312e-06, -+ 8.78264005324776636302e-06, -+ 8.63060058977119588699e-06, -+ 8.47552480106907815021e-06, -+ 8.31753391098935562125e-06, -+ 8.15674956820603695338e-06, -+ 7.99329376986349665764e-06, -+ 7.82728878573373623468e-06, -+ 7.65885708292866533933e-06, -+ 7.48812125120667820171e-06, -+ 7.31520392891465129538e-06, -+ 7.14022772960352193400e-06, -+ 6.96331516935741928119e-06, -+ 6.78458859487234582688e-06, -+ 6.60417011232208535555e-06, -+ 6.42218151704836629878e-06, -+ 6.23874422410881874162e-06, -+ 6.05397919971873245333e-06, -+ 5.86800689361913014930e-06, -+ 5.68094717240549469965e-06, -+ 5.49291925384726654124e-06, -+ 5.30404164223008170432e-06, -+ 5.11443206475166292147e-06, -+ 4.92420740899910160668e-06, -+ 4.73348366153649160803e-06, -+ 4.54237584763147922608e-06, -+ 4.35099797214519011545e-06, -+ 4.15946296161273383862e-06, -+ 3.96788260753767942779e-06, -+ 3.77636751092580240556e-06, -+ 3.58502702807880729068e-06, -+ 3.39396921767065449759e-06, -+ 3.20330078912824216524e-06, -+ 3.01312705233424288917e-06, -+ 2.82355186867183291849e-06, -+ 2.63467760343009042062e-06, -+ 2.44660507958478551702e-06, -+ 2.25943353297212192994e-06, -+ 2.07326056886889636990e-06, -+ 1.88818211999486711094e-06, -+ 1.70429240594666796266e-06, -+ 1.52168389407997070498e-06, -+ 1.34044726184580192320e-06, -+ 1.16067136059360877587e-06, -+ 9.82443180850182688139e-07, -+ 8.05847819080474491893e-07, -+ 6.30968445938113515307e-07, -+ 4.57886276012498259056e-07, -+ 2.86680539075394581232e-07, -+ 1.17428452831952805658e-07, -+-4.97948028199512061526e-08, -+-2.14916110022078276637e-07, -+-3.77864435677151772163e-07, -+-5.38570852660314438457e-07, -+-6.96968559519905157610e-07, -+-8.52992898671310133264e-07, -+-1.00658137308563959240e-06, -+-1.15767366147595502125e-06, -+-1.30621163198739205903e-06, -+-1.45213935439566631263e-06, -+-1.59540311081938818504e-06, -+-1.73595140495523324136e-06, -+-1.87373496984242769148e-06, -+-2.00870677416657680066e-06, -+-2.14082202711105138891e-06, -+-2.27003818176825526611e-06, -+-2.39631493712127321177e-06, -+-2.51961423860721225935e-06, -+-2.63990027727692722499e-06, -+-2.75713948756333368392e-06, -+-2.87130054367384340272e-06, -+-2.98235435462072420536e-06, -+-3.09027405790690176183e-06, -+-3.19503501188302714502e-06, -+-3.29661478679241666049e-06, -+-3.39499315452328387347e-06, -+-3.49015207708610277043e-06, -+-3.58207569383478124936e-06, -+-3.67075030745277205795e-06, -+-3.75616436872432333914e-06, -+-3.83830846011024974469e-06, -+-3.91717527815298500760e-06, -+-3.99275961473000555479e-06, -+-4.06505833718047160103e-06, -+-4.13407036732752447398e-06, -+-4.19979665941946242550e-06, -+-4.26224017701520252964e-06, -+-4.32140586883761345266e-06, -+-4.37730064362061373922e-06, -+-4.42993334397458008860e-06, -+-4.47931471929707665449e-06, -+-4.52545739775462975901e-06, -+-4.56837585736176623178e-06, -+-4.60808639618528355489e-06, -+-4.64460710170019533535e-06, -+-4.67795781932549308073e-06, -+-4.70816012016700297387e-06, -+-4.73523726799615031957e-06, -+-4.75921418549265574824e-06, -+-4.78011741977943205404e-06, -+-4.79797510727910759225e-06, -+-4.81281693792077799724e-06, -+-4.82467411872585649209e-06, -+-4.83357933680284597292e-06, -+-4.83956672177992600872e-06, -+-4.84267180770512457676e-06, -+-4.84293149444327853537e-06, -+-4.84038400859978304718e-06, -+-4.83506886400059992306e-06, -+-4.82702682175797029301e-06, -+-4.81629984995190550901e-06, -+-4.80293108295687288677e-06, -+-4.78696478044319962005e-06, -+-4.76844628608297569874e-06, -+-4.74742198598980721643e-06, -+-4.72393926692184768618e-06, -+-4.69804647427729357874e-06, -+-4.66979286991168869255e-06, -+-4.63922858980587374532e-06, -+-4.60640460161349042157e-06, -+-4.57137266211669161266e-06, -+-4.53418527461856474313e-06, -+-4.49489564630047438049e-06, -+-4.45355764557232873177e-06, -+-4.41022575944365265741e-06, -+-4.36495505094285770681e-06, -+-4.31780111661199634214e-06, -+-4.26882004410400630158e-06, -+-4.21806836990897163306e-06, -+-4.16560303723581088566e-06, -+-4.11148135407525745674e-06, -+-4.05576095146995474136e-06, -+-3.99849974201671793024e-06, -+-3.93975587862589741230e-06, -+-3.87958771356253902739e-06, -+-3.81805375779311230168e-06, -+-3.75521264066174805207e-06, -+-3.69112306991899966841e-06, -+-3.62584379212629908306e-06, -+-3.55943355345803456996e-06, -+-3.49195106092336089756e-06, -+-3.42345494402936616337e-06, -+-3.35400371690614687047e-06, -+-3.28365574091441607464e-06, -+-3.21246918775588953681e-06, -+-3.14050200310536497332e-06, -+-3.06781187078386562419e-06, -+-2.99445617749091577548e-06, -+-2.92049197811430259292e-06, -+-2.84597596163407434304e-06, -+-2.77096441763784568063e-06, -+-2.69551320346391274513e-06, -+-2.61967771198731242738e-06, -+-2.54351284006417954935e-06, -+-2.46707295764927670231e-06, -+-2.39041187760002226610e-06, -+-2.31358282618092573712e-06, -+-2.23663841428083219829e-06, -+-2.15963060935584024358e-06, -+-2.08261070810834870857e-06, -+-2.00562930991492076031e-06, -+-1.92873629101175331357e-06, -+-1.85198077944850633880e-06, -+-1.77541113081986172875e-06, -+-1.69907490478282910220e-06, -+-1.62301884236816257159e-06, -+-1.54728884409369261285e-06, -+-1.47192994888573774293e-06, -+-1.39698631381516495750e-06, -+-1.32250119465412662692e-06, -+-1.24851692725776004904e-06, -+-1.17507490977594879706e-06, -+-1.10221558569852023006e-06, -+-1.02997842773779330541e-06, -+-9.58401922550402422422e-07, -+-8.87523556300846598974e-07, -+-8.17379801068637194395e-07, -+-7.48006102099267160073e-07, -+-6.79436865899721901669e-07, -+-6.11705449178669713405e-07, -+-5.44844148629825548117e-07, -+-4.78884191557767192135e-07, -+-4.13855727343869051617e-07, -+-3.49787819750522529807e-07, -+-2.86708440059940296556e-07, -+-2.24644461044386128961e-07, -+-1.63621651764123018711e-07, -+-1.03664673187799380991e-07, -+-4.47970746308059675830e-08, -+ 0 /* Need a final zero coefficient */ -+ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/samplerate.c k3b-r948463.patched/libk3b/plugin/libsamplerate/samplerate.c ---- k3b-r948463/libk3b/plugin/libsamplerate/samplerate.c 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/samplerate.c 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,301 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+#include <stdio.h> -+#include <stdlib.h> -+#include <string.h> -+ -+#include "config-k3b.h" -+ -+#include "samplerate.h" -+#include "common.h" -+ -+SRC_STATE * -+src_new (int converter_type, int channels, int *error) -+{ SRC_PRIVATE *psrc ; -+ -+ if (error) -+ *error = SRC_ERR_NO_ERROR ; -+ -+ if (channels < 1) -+ { if (error) -+ *error = SRC_ERR_BAD_CHANNEL_COUNT ; -+ return NULL ; -+ } ; -+ -+ if ((psrc = calloc (1, sizeof (*psrc))) == NULL) -+ { if (error) -+ *error = SRC_ERR_MALLOC_FAILED ; -+ return NULL ; -+ } ; -+ -+ psrc->channels = channels ; -+ -+ if (sinc_set_converter (psrc, converter_type) != SRC_ERR_NO_ERROR && -+ zoh_set_converter (psrc, converter_type) != SRC_ERR_NO_ERROR && -+ linear_set_converter (psrc, converter_type) != SRC_ERR_NO_ERROR) -+ { if (error) -+ *error = SRC_ERR_BAD_CONVERTER ; -+ free (psrc) ; -+ psrc = NULL ; -+ } ; -+ -+ src_reset ((SRC_STATE*) psrc) ; -+ -+ return (SRC_STATE*) psrc ; -+} /* src_new */ -+ -+SRC_STATE * -+src_delete (SRC_STATE *state) -+{ SRC_PRIVATE *psrc ; -+ -+ psrc = (SRC_PRIVATE*) state ; -+ if (psrc) -+ { if (psrc->private_data) -+ free (psrc->private_data) ; -+ memset (psrc, 0, sizeof (SRC_PRIVATE)) ; -+ free (psrc) ; -+ } ; -+ -+ return NULL ; -+} /* src_state */ -+ -+int -+src_process (SRC_STATE *state, SRC_DATA *data) -+{ SRC_PRIVATE *psrc ; -+ int error ; -+ -+ psrc = (SRC_PRIVATE*) state ; -+ -+ if (psrc == NULL) -+ return SRC_ERR_BAD_STATE ; -+ if (psrc->process == NULL) -+ return SRC_ERR_BAD_PROC_PTR ; -+ -+ /* Check for valid SRC_DATA first. */ -+ if (data == NULL) -+ return SRC_ERR_BAD_DATA ; -+ /* Check src_ratio is in range. */ -+ if (data->src_ratio < (1.0 / SRC_MAX_RATIO) || data->src_ratio > (1.0 * SRC_MAX_RATIO)) -+ return SRC_ERR_BAD_SRC_RATIO ; -+ -+ /* And that data_in and data_out are valid. */ -+ if (data->data_in == NULL || data->data_out == NULL) -+ return SRC_ERR_BAD_DATA_PTR ; -+ -+ if (data->data_in == NULL) -+ data->input_frames = 0 ; -+ -+ if (data->data_in < data->data_out) -+ { if (data->data_in + data->input_frames * psrc->channels > data->data_out) -+ { /*-printf ("data_in: %p data_out: %p\n", -+ data->data_in + data->input_frames * psrc->channels, data->data_out) ;-*/ -+ return SRC_ERR_DATA_OVERLAP ; -+ } ; -+ } -+ else if (data->data_out + data->output_frames * psrc->channels > data->data_in) -+ { /*-printf ("data_out: %p (%p) data_in: %p\n", data->data_out, -+ data->data_out + data->output_frames * psrc->channels, data->data_in) ;-*/ -+ return SRC_ERR_DATA_OVERLAP ; -+ } ; -+ -+ if (data->input_frames < 0) -+ data->input_frames = 0 ; -+ if (data->output_frames < 0) -+ data->output_frames = 0 ; -+ -+ /* Set the input and output counts to zero. */ -+ data->input_frames_used = 0 ; -+ data->output_frames_gen = 0 ; -+ -+ /* Special case for when last_ratio has not been set. */ -+ if (psrc->last_ratio < (1.0 / SRC_MAX_RATIO)) -+ psrc->last_ratio = data->src_ratio ; -+ -+ /* Now process. */ -+ error = psrc->process (psrc, data) ; -+ -+ return error ; -+} /* src_process */ -+ -+int -+src_set_ratio (SRC_STATE *state, double new_ratio) -+{ SRC_PRIVATE *psrc ; -+ -+ psrc = (SRC_PRIVATE*) state ; -+ -+ if (psrc == NULL) -+ return SRC_ERR_BAD_STATE ; -+ if (psrc->process == NULL) -+ return SRC_ERR_BAD_PROC_PTR ; -+ -+ psrc->last_ratio = new_ratio ; -+ -+ return SRC_ERR_NO_ERROR ; -+} /* src_set_ratio */ -+ -+int -+src_reset (SRC_STATE *state) -+{ SRC_PRIVATE *psrc ; -+ -+ if ((psrc = (SRC_PRIVATE*) state) == NULL) -+ return SRC_ERR_BAD_STATE ; -+ -+ if (psrc->reset != NULL) -+ psrc->reset (psrc) ; -+ -+ psrc->last_position = 0.0 ; -+ psrc->last_ratio = 0.0 ; -+ -+ psrc->error = SRC_ERR_NO_ERROR ; -+ -+ return SRC_ERR_NO_ERROR ; -+} /* src_reset */ -+ -+/*============================================================================== -+** Control functions. -+*/ -+ -+const char * -+src_get_name (int converter_type) -+{ const char *desc ; -+ -+ if ((desc = sinc_get_name (converter_type)) != NULL) -+ return desc ; -+ -+ if ((desc = zoh_get_name (converter_type)) != NULL) -+ return desc ; -+ -+ if ((desc = linear_get_name (converter_type)) != NULL) -+ return desc ; -+ -+ return NULL ; -+} /* src_get_name */ -+ -+const char * -+src_get_description (int converter_type) -+{ const char *desc ; -+ -+ if ((desc = sinc_get_description (converter_type)) != NULL) -+ return desc ; -+ -+ if ((desc = zoh_get_description (converter_type)) != NULL) -+ return desc ; -+ -+ if ((desc = linear_get_description (converter_type)) != NULL) -+ return desc ; -+ -+ return NULL ; -+} /* src_get_description */ -+ -+const char * -+src_get_version (void) -+{ return "libsamplerate-k3b";/*PACKAGE "-" VERSION ;*/ -+} /* src_get_version */ -+ -+int -+src_is_valid_ratio (double ratio) -+{ -+ if (ratio < (1.0 / SRC_MAX_RATIO) || ratio > (1.0 * SRC_MAX_RATIO)) -+ return SRC_FALSE ; -+ -+ return SRC_TRUE ; -+} /* src_is_valid_ratio */ -+ -+/*============================================================================== -+** Error reporting functions. -+*/ -+ -+int -+src_error (SRC_STATE *state) -+{ if (state) -+ return ((SRC_PRIVATE*) state)->error ; -+ return SRC_ERR_NO_ERROR ; -+} /* src_error */ -+ -+const char* -+src_strerror (int error) -+{ -+ switch (error) -+ { case SRC_ERR_NO_ERROR : -+ return "No error" ; -+ case SRC_ERR_MALLOC_FAILED : -+ return "Malloc failed." ; -+ case SRC_ERR_BAD_STATE : -+ return "SRC_STATE pointer is NULL." ; -+ case SRC_ERR_BAD_DATA : -+ return "SRC_DATA pointer is NULL." ; -+ case SRC_ERR_BAD_DATA_PTR : -+ return "SRC_DATA->data_out is NULL." ; -+ case SRC_ERR_NO_PRIVATE : -+ return "Internal error. No private data." ; -+ case SRC_ERR_BAD_SRC_RATIO : -+ return "SRC ratio outside [-12, 12] range." ; -+ case SRC_ERR_BAD_SINC_STATE : -+ return "src_process() called without reset after end_of_input." ; -+ case SRC_ERR_BAD_PROC_PTR : -+ return "Internal error. No process pointer." ; -+ case SRC_ERR_SHIFT_BITS : -+ return "Internal error. SHIFT_BITS too large." ; -+ case SRC_ERR_FILTER_LEN : -+ return "Internal error. Filter length too large." ; -+ case SRC_ERR_BAD_CONVERTER : -+ return "Bad converter number." ; -+ case SRC_ERR_BAD_CHANNEL_COUNT : -+ return "Channel count must be >= 1." ; -+ case SRC_ERR_SINC_BAD_BUFFER_LEN : -+ return "Internal error. Bad buffer length. Please report this." ; -+ case SRC_ERR_SIZE_INCOMPATIBILITY : -+ return "Internal error. Input data / internal buffer size difference. Please report this." ; -+ case SRC_ERR_BAD_PRIV_PTR : -+ return "Internal error. Private pointer is NULL. Please report this." ; -+ -+ case SRC_ERR_DATA_OVERLAP : -+ return "Input and output data arrays overlap." ; -+ -+ case SRC_ERR_MAX_ERROR : -+ return "Placeholder. No error defined for this error number." ; -+ -+ default : break ; -+ } -+ -+ return NULL ; -+} /* src_strerror */ -+ -+/*============================================================================== -+** Simple interface for performing a single conversion from input buffer to -+** output buffer at a fixed conversion ratio. -+*/ -+ -+int -+src_simple (SRC_DATA *src_data, int converter, int channels) -+{ SRC_STATE *src_state ; -+ int error ; -+ -+ if ((src_state = src_new (converter, channels, &error)) == NULL) -+ return error ; -+ -+ src_data->end_of_input = 1 ; /* Only one buffer worth of input. */ -+ -+ error = src_process (src_state, src_data) ; -+ -+ src_state = src_delete (src_state) ; -+ -+ return error ; -+} /* src_simple */ -+ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/samplerate.h k3b-r948463.patched/libk3b/plugin/libsamplerate/samplerate.h ---- k3b-r948463/libk3b/plugin/libsamplerate/samplerate.h 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/samplerate.h 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,138 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+/* -+** API documentation is available here: -+** http://www.mega-nerd.com/SRC/api.html -+*/ -+ -+#ifndef SAMPLERATE_H -+#define SAMPLERATE_H -+ -+#ifdef __cplusplus -+extern "C" { -+#endif /* __cplusplus */ -+ -+typedef struct SRC_STATE_tag SRC_STATE ; -+ -+typedef struct -+{ float *data_in, *data_out ; -+ -+ long input_frames, output_frames ; -+ long input_frames_used, output_frames_gen ; -+ -+ int end_of_input ; -+ -+ double src_ratio ; -+} SRC_DATA ; -+ -+/* -+** Simple interface for performing a single conversion from input buffer to -+** output buffer at a fixed conversion ratio. -+*/ -+int src_simple (SRC_DATA *data, int converter_type, int channels) ; -+ -+/* -+** Initialisation function : return an anonymous pointer to the internal state -+** of the converter. Choose a converter from the enums below. -+*/ -+ -+SRC_STATE* src_new (int converter_type, int channels, int *error) ; -+ -+/* -+** Cleanup all internal allocations. -+** Always returns NULL. -+*/ -+ -+SRC_STATE* src_delete (SRC_STATE *state) ; -+ -+/* -+** This library contains a number of different sample rate converters, -+** numbered 0 through N. -+** -+** Return a string giving either a name or a more full description of each -+** sample rate converter or NULL if no sample rate converter exists for -+** the given value. The converters are sequentially numbered from 0 to N. -+*/ -+ -+const char *src_get_name (int converter_type) ; -+const char *src_get_description (int converter_type) ; -+const char *src_get_version (void) ; -+ -+/* -+** Processing function. -+** Returns non zero on error. -+*/ -+ -+int src_process (SRC_STATE *state, SRC_DATA *data) ; -+ -+/* -+** Set a new SRC ratio. This allows step responses -+** in the conversion ratio. -+** Returns non zero on error. -+*/ -+ -+int src_set_ratio (SRC_STATE *state, double new_ratio) ; -+ -+/* -+** Reset the internal SRC state. -+** Does not modify the quality settings. -+** Does not free any memory allocations. -+** Returns non zero on error. -+*/ -+ -+int src_reset (SRC_STATE *state) ; -+ -+/* -+** Return TRUE if ratio is a valid conversion ratio, FALSE -+** otherwise. -+*/ -+ -+int src_is_valid_ratio (double ratio) ; -+ -+/* -+** Return an error number. -+*/ -+ -+int src_error (SRC_STATE *state) ; -+ -+/* -+** Convert the error number into a string. -+*/ -+const char* src_strerror (int error) ; -+ -+/* -+** The following enums can be used to set the interpolator type -+** using the function src_set_converter(). -+*/ -+ -+enum -+{ -+ SRC_SINC_BEST_QUALITY = 0, -+ SRC_SINC_MEDIUM_QUALITY = 1, -+ SRC_SINC_FASTEST = 2, -+ SRC_ZERO_ORDER_HOLD = 3, -+ SRC_LINEAR = 4 -+} ; -+ -+ -+#ifdef __cplusplus -+} /* extern "C" */ -+#endif /* __cplusplus */ -+ -+#endif /* SAMPLERATE_H */ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/src_linear.c k3b-r948463.patched/libk3b/plugin/libsamplerate/src_linear.c ---- k3b-r948463/libk3b/plugin/libsamplerate/src_linear.c 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/src_linear.c 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,194 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+#include <stdio.h> -+#include <stdlib.h> -+#include <string.h> -+ -+#include "config-k3b.h" -+#include "float_cast.h" -+#include "common.h" -+ -+static void linear_reset (SRC_PRIVATE *psrc) ; -+ -+/*======================================================================================== -+*/ -+ -+#define LINEAR_MAGIC_MARKER MAKE_MAGIC('l','i','n','e','a','r') -+ -+typedef struct -+{ int linear_magic_marker ; -+ int channels ; -+ long in_count, in_used ; -+ long out_count, out_gen ; -+ float last_value [1] ; -+} LINEAR_DATA ; -+ -+/*---------------------------------------------------------------------------------------- -+*/ -+int -+linear_process (SRC_PRIVATE *psrc, SRC_DATA *data) -+{ LINEAR_DATA *linear ; -+ double src_ratio, input_index ; -+ int ch ; -+ -+ if (psrc->private_data == NULL) -+ return SRC_ERR_NO_PRIVATE ; -+ -+ linear = (LINEAR_DATA*) psrc->private_data ; -+ -+ linear->in_count = data->input_frames * linear->channels ; -+ linear->out_count = data->output_frames * linear->channels ; -+ linear->in_used = linear->out_gen = 0 ; -+ -+ src_ratio = psrc->last_ratio ; -+ input_index = psrc->last_position ; -+ -+ /* Calculate samples before first sample in input array. */ -+ while (input_index > 0.0 && input_index < 1.0 && linear->out_gen < linear->out_count) -+ { -+ if (linear->in_used + input_index > linear->in_count) -+ break ; -+ -+ if (fabs (psrc->last_ratio - data->src_ratio) > SRC_MIN_RATIO_DIFF) -+ src_ratio = psrc->last_ratio + linear->out_gen * (data->src_ratio - psrc->last_ratio) / (linear->out_count - 1) ; -+ -+ for (ch = 0 ; ch < linear->channels ; ch++) -+ { data->data_out [linear->out_gen] = linear->last_value [ch] + input_index * -+ (data->data_in [ch] - linear->last_value [ch]) ; -+ linear->out_gen ++ ; -+ } ; -+ -+ /* Figure out the next index. */ -+ input_index += 1.0 / src_ratio ; -+ } ; -+ -+ /* Main processing loop. */ -+ while (linear->out_gen < linear->out_count) -+ { -+ linear->in_used += linear->channels * lrint (floor (input_index)) ; -+ input_index -= floor (input_index) ; -+ -+ if (linear->in_used + input_index > linear->in_count) -+ break ; -+ -+ if (fabs (psrc->last_ratio - data->src_ratio) > SRC_MIN_RATIO_DIFF) -+ src_ratio = psrc->last_ratio + linear->out_gen * (data->src_ratio - psrc->last_ratio) / (linear->out_count - 1) ; -+ -+ for (ch = 0 ; ch < linear->channels ; ch++) -+ { data->data_out [linear->out_gen] = data->data_in [linear->in_used + ch] + input_index * -+ (data->data_in [linear->in_used + linear->channels + ch] - data->data_in [linear->in_used + ch]) ; -+ linear->out_gen ++ ; -+ } ; -+ -+ /* Figure out the next index. */ -+ input_index += 1.0 / src_ratio ; -+ } ; -+ -+/*- if (input_index > linear->in_count - linear->in_used) -+ { input_index -= linear->in_count - linear->in_used ; -+ linear->in_used = linear->in_count ; -+ puts ("XXXXXXXXXX") ; /+*-exit (1) ;-*+/ -+ } ; -+-*/ -+ -+ psrc->last_position = input_index ; -+ -+ for (ch = 0 ; ch < linear->channels ; ch++) -+ { linear->last_value [ch] = data->data_in [linear->in_used - linear->channels + ch] ; -+ -+/*- data->data_out [0 + ch] = -0.9 ; -+ data->data_out [linear->out_gen - linear->channels + ch] = 0.9 ; -*/ -+ } ; -+ -+ /* Save current ratio rather then target ratio. */ -+ psrc->last_ratio = src_ratio ; -+ -+ data->input_frames_used = linear->in_used / linear->channels ; -+ data->output_frames_gen = linear->out_gen / linear->channels ; -+ -+ return SRC_ERR_NO_ERROR ; -+} /* linear_process */ -+ -+/*------------------------------------------------------------------------------ -+*/ -+ -+const char* -+linear_get_name (int src_enum) -+{ -+ if (src_enum == SRC_LINEAR) -+ return "Linear Interpolator" ; -+ -+ return NULL ; -+} /* linear_get_name */ -+ -+const char* -+linear_get_description (int src_enum) -+{ -+ if (src_enum == SRC_LINEAR) -+ return "Linear interpolator, very fast, poor quality." ; -+ -+ return NULL ; -+} /* linear_get_descrition */ -+ -+int -+linear_set_converter (SRC_PRIVATE *psrc, int src_enum) -+{ LINEAR_DATA *linear ; -+ -+ if (src_enum != SRC_LINEAR) -+ return SRC_ERR_BAD_CONVERTER ; -+ -+ if (psrc->private_data != NULL) -+ { linear = (LINEAR_DATA*) psrc->private_data ; -+ if (linear->linear_magic_marker != LINEAR_MAGIC_MARKER) -+ { free (psrc->private_data) ; -+ psrc->private_data = NULL ; -+ } ; -+ } ; -+ -+ if (psrc->private_data == NULL) -+ { linear = calloc (1, sizeof (*linear) + psrc->channels * sizeof (float)) ; -+ if (linear == NULL) -+ return SRC_ERR_MALLOC_FAILED ; -+ psrc->private_data = linear ; -+ } ; -+ -+ linear->linear_magic_marker = LINEAR_MAGIC_MARKER ; -+ linear->channels = psrc->channels ; -+ -+ psrc->process = linear_process ; -+ psrc->reset = linear_reset ; -+ -+ linear_reset (psrc) ; -+ -+ return SRC_ERR_NO_ERROR ; -+} /* linear_set_converter */ -+ -+/*=================================================================================== -+*/ -+ -+static void -+linear_reset (SRC_PRIVATE *psrc) -+{ LINEAR_DATA *linear ; -+ -+ linear = (LINEAR_DATA*) psrc->private_data ; -+ if (linear == NULL) -+ return ; -+ -+ memset (linear->last_value, 0, sizeof (linear->last_value [0]) * linear->channels) ; -+} /* linear_reset */ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/src_sinc.c k3b-r948463.patched/libk3b/plugin/libsamplerate/src_sinc.c ---- k3b-r948463/libk3b/plugin/libsamplerate/src_sinc.c 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/src_sinc.c 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,471 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+#include <stdio.h> -+#include <stdlib.h> -+#include <string.h> -+ -+#include "config-k3b.h" -+#include "float_cast.h" -+#include "common.h" -+ -+#define SINC_MAGIC_MARKER MAKE_MAGIC(' ','s','i','n','c',' ') -+ -+#define ARRAY_LEN(x) ((int) (sizeof (x) / sizeof ((x) [0]))) -+ -+/*======================================================================================== -+** Macros for handling the index into the array for the filter. -+** Double precision floating point is not accurate enough so use a 64 bit -+** fixed point value instead. SHIFT_BITS (current value of 48) is the number -+** of bits to the right of the decimal point. -+** The rest of the macros are for retrieving the fractional and integer parts -+** and for converting floats and ints to the fixed point format or from the -+** fixed point type back to integers and floats. -+*/ -+ -+#define MAKE_INCREMENT_T(x) ((increment_t) (x)) -+ -+#define SHIFT_BITS 16 -+#define FP_ONE ((double) (((increment_t) 1) << SHIFT_BITS)) -+ -+#define DOUBLE_TO_FP(x) (lrint ((x) * FP_ONE)) -+#define INT_TO_FP(x) (((increment_t) (x)) << SHIFT_BITS) -+ -+#define FP_FRACTION_PART(x) ((x) & ((((increment_t) 1) << SHIFT_BITS) - 1)) -+#define FP_INTEGER_PART(x) ((x) & (((increment_t) -1) << SHIFT_BITS)) -+ -+#define FP_TO_INT(x) (((x) >> SHIFT_BITS)) -+#define FP_TO_DOUBLE(x) (FP_FRACTION_PART (x) / FP_ONE) -+ -+/*======================================================================================== -+*/ -+ -+typedef int32_t increment_t ; -+typedef float coeff_t ; -+ -+enum -+{ -+ STATE_BUFFER_START = 101, -+ STATE_DATA_CONTINUE = 102, -+ STATE_BUFFER_END = 103, -+ STATE_FINISHED -+} ; -+ -+typedef struct -+{ int sinc_magic_marker ; -+ -+ int channels ; -+ long in_count, in_used ; -+ long out_count, out_gen ; -+ -+ int coeff_half_len, index_inc ; -+ int has_diffs ; -+ -+ double src_ratio, input_index ; -+ -+ int coeff_len ; -+ coeff_t const *coeffs ; -+ -+ int b_current, b_end, b_real_end, b_len ; -+ float *pdata ; -+ float buffer [1] ; -+} SINC_FILTER ; -+ -+static double calc_output (SINC_FILTER *filter, increment_t increment, increment_t start_filter_index, int ch) ; -+ -+static void prepare_data (SINC_FILTER *filter, SRC_DATA *data, int half_filter_chan_len) ; -+ -+static void sinc_reset (SRC_PRIVATE *psrc) ; -+ -+static coeff_t const high_qual_coeffs [] = -+{ -+#include "high_qual_coeffs.h" -+} ; /* high_qual_coeffs */ -+ -+static coeff_t const mid_qual_coeffs [] = -+{ -+#include "mid_qual_coeffs.h" -+} ; /* mid_qual_coeffs */ -+ -+static coeff_t const fastest_coeffs [] = -+{ -+#include "fastest_coeffs.h" -+} ; /* fastest_coeffs */ -+ -+/*---------------------------------------------------------------------------------------- -+*/ -+ -+const char* -+sinc_get_name (int src_enum) -+{ -+ switch (src_enum) -+ { case SRC_SINC_BEST_QUALITY : -+ return "Best Sinc Interpolator" ; -+ -+ case SRC_SINC_MEDIUM_QUALITY : -+ return "Medium Sinc Interpolator" ; -+ -+ case SRC_SINC_FASTEST : -+ return "Fastest Sinc Interpolator" ; -+ } ; -+ -+ return NULL ; -+} /* sinc_get_descrition */ -+ -+const char* -+sinc_get_description (int src_enum) -+{ -+ switch (src_enum) -+ { case SRC_SINC_BEST_QUALITY : -+ return "Band limitied sinc interpolation, best quality, 97dB SNR, 96% BW." ; -+ -+ case SRC_SINC_MEDIUM_QUALITY : -+ return "Band limitied sinc interpolation, medium quality, 97dB SNR, 90% BW." ; -+ -+ case SRC_SINC_FASTEST : -+ return "Band limitied sinc interpolation, fastest, 97dB SNR, 80% BW." ; -+ } ; -+ -+ return NULL ; -+} /* sinc_get_descrition */ -+ -+int -+sinc_set_converter (SRC_PRIVATE *psrc, int src_enum) -+{ SINC_FILTER *filter, temp_filter ; -+ int count ; -+ -+ /* Quick sanity check. */ -+ if (SHIFT_BITS >= sizeof (increment_t) * 8 - 1) -+ return SRC_ERR_SHIFT_BITS ; -+ -+ if (psrc->private_data != NULL) -+ { filter = (SINC_FILTER*) psrc->private_data ; -+ if (filter->sinc_magic_marker != SINC_MAGIC_MARKER) -+ { free (psrc->private_data) ; -+ psrc->private_data = NULL ; -+ } ; -+ } ; -+ -+ memset (&temp_filter, 0, sizeof (temp_filter)) ; -+ -+ temp_filter.sinc_magic_marker = SINC_MAGIC_MARKER ; -+ temp_filter.channels = psrc->channels ; -+ -+ psrc->process = sinc_process ; -+ psrc->reset = sinc_reset ; -+ -+ switch (src_enum) -+ { case SRC_SINC_BEST_QUALITY : -+ temp_filter.coeffs = high_qual_coeffs ; -+ temp_filter.coeff_half_len = (sizeof (high_qual_coeffs) / sizeof (coeff_t)) - 1 ; -+ temp_filter.index_inc = 128 ; -+ temp_filter.has_diffs = SRC_FALSE ; -+ temp_filter.coeff_len = sizeof (high_qual_coeffs) / sizeof (coeff_t) ; -+ break ; -+ -+ case SRC_SINC_MEDIUM_QUALITY : -+ temp_filter.coeffs = mid_qual_coeffs ; -+ temp_filter.coeff_half_len = (sizeof (mid_qual_coeffs) / sizeof (coeff_t)) - 1 ; -+ temp_filter.index_inc = 128 ; -+ temp_filter.has_diffs = SRC_FALSE ; -+ temp_filter.coeff_len = sizeof (mid_qual_coeffs) / sizeof (coeff_t) ; -+ break ; -+ -+ case SRC_SINC_FASTEST : -+ temp_filter.coeffs = fastest_coeffs ; -+ temp_filter.coeff_half_len = (sizeof (fastest_coeffs) / sizeof (coeff_t)) - 1 ; -+ temp_filter.index_inc = 128 ; -+ temp_filter.has_diffs = SRC_FALSE ; -+ temp_filter.coeff_len = sizeof (fastest_coeffs) / sizeof (coeff_t) ; -+ break ; -+ -+ default : -+ return SRC_ERR_BAD_CONVERTER ; -+ } ; -+ -+ /* -+ ** FIXME : This needs to be looked at more closely to see if there is -+ ** a better way. Need to look at prepare_data () at the same time. -+ */ -+ -+ temp_filter.b_len = 1000 + 2 * lrint (ceil (temp_filter.coeff_len / (temp_filter.index_inc * 1.0) * SRC_MAX_RATIO)) ; -+ temp_filter.b_len *= temp_filter.channels ; -+ -+ if ((filter = calloc (1, sizeof (SINC_FILTER) + sizeof (filter->buffer [0]) * (temp_filter.b_len + temp_filter.channels))) == NULL) -+ return SRC_ERR_MALLOC_FAILED ; -+ -+ *filter = temp_filter ; -+ memset (&temp_filter, 0xEE, sizeof (temp_filter)) ; -+ -+ psrc->private_data = filter ; -+ -+ sinc_reset (psrc) ; -+ -+ count = (filter->coeff_half_len * INT_TO_FP (1)) / FP_ONE ; -+ -+ if (abs (count - filter->coeff_half_len) >= 1) -+ return SRC_ERR_FILTER_LEN ; -+ -+ return SRC_ERR_NO_ERROR ; -+} /* sinc_set_converter */ -+ -+static void -+sinc_reset (SRC_PRIVATE *psrc) -+{ SINC_FILTER *filter ; -+ -+ filter = (SINC_FILTER*) psrc->private_data ; -+ if (filter == NULL) -+ return ; -+ -+ filter->b_current = filter->b_end = 0 ; -+ filter->b_real_end = -1 ; -+ -+ filter->src_ratio = filter->input_index = 0.0 ; -+ -+ memset (filter->buffer, 0, filter->b_len * sizeof (filter->buffer [0])) ; -+ -+ /* Set this for a sanity check */ -+ memset (filter->buffer + filter->b_len, 0xAA, filter->channels * sizeof (filter->buffer [0])) ; -+} /* sinc_reset */ -+ -+/*======================================================================================== -+** Beware all ye who dare pass this point. There be dragons here. -+*/ -+ -+int -+sinc_process (SRC_PRIVATE *psrc, SRC_DATA *data) -+{ SINC_FILTER *filter ; -+ double input_index, src_ratio, count, float_increment, terminate ; -+ increment_t increment, start_filter_index ; -+ int half_filter_chan_len, samples_in_hand, ch ; -+ -+ if (psrc->private_data == NULL) -+ return SRC_ERR_NO_PRIVATE ; -+ -+ filter = (SINC_FILTER*) psrc->private_data ; -+ -+ /* If there is not a problem, this will be optimised out. */ -+ if (sizeof (filter->buffer [0]) != sizeof (data->data_in [0])) -+ return SRC_ERR_SIZE_INCOMPATIBILITY ; -+ -+ filter->in_count = data->input_frames * filter->channels ; -+ filter->out_count = data->output_frames * filter->channels ; -+ filter->in_used = filter->out_gen = 0 ; -+ -+ src_ratio = psrc->last_ratio ; -+ -+ /* Check the sample rate ratio wrt the buffer len. */ -+ count = (filter->coeff_half_len + 2.0) / filter->index_inc ; -+ if (MIN (psrc->last_ratio, data->src_ratio) < 1.0) -+ count /= MIN (psrc->last_ratio, data->src_ratio) ; -+ count = lrint (ceil (count)) ; -+ -+ /* Maximum coefficientson either side of center point. */ -+ half_filter_chan_len = filter->channels * (lrint (count) + 1) ; -+ -+ input_index = psrc->last_position ; -+ if (input_index >= 1.0) -+ { filter->b_current = (filter->b_current + filter->channels * lrint (floor (input_index))) % filter->b_len ; -+ input_index -= floor (input_index) ; -+ } ; -+ -+ float_increment = filter->index_inc ; -+ -+ filter->b_current = (filter->b_current + filter->channels * lrint (floor (input_index))) % filter->b_len ; -+ input_index -= floor (input_index) ; -+ -+ terminate = 1.0 / src_ratio + 1e-20 ; -+ -+ /* Main processing loop. */ -+ while (filter->out_gen < filter->out_count) -+ { -+ /* Need to reload buffer? */ -+ samples_in_hand = (filter->b_end - filter->b_current + filter->b_len) % filter->b_len ; -+ -+ if (samples_in_hand <= half_filter_chan_len) -+ { prepare_data (filter, data, half_filter_chan_len) ; -+ -+ samples_in_hand = (filter->b_end - filter->b_current + filter->b_len) % filter->b_len ; -+ if (samples_in_hand <= half_filter_chan_len) -+ break ; -+ } ; -+ -+ /* This is the termination condition. */ -+ if (filter->b_real_end >= 0) -+ { if (filter->b_current + input_index + terminate >= filter->b_real_end) -+ break ; -+ } ; -+ -+ if (fabs (psrc->last_ratio - data->src_ratio) > 1e-10) -+ src_ratio = psrc->last_ratio + filter->out_gen * (data->src_ratio - psrc->last_ratio) / (filter->out_count - 1) ; -+ -+ float_increment = filter->index_inc * 1.0 ; -+ if (src_ratio < 1.0) -+ float_increment = filter->index_inc * src_ratio ; -+ -+ increment = DOUBLE_TO_FP (float_increment) ; -+ -+ start_filter_index = DOUBLE_TO_FP (input_index * float_increment) ; -+ -+ for (ch = 0 ; ch < filter->channels ; ch++) -+ { data->data_out [filter->out_gen] = (float_increment / filter->index_inc) * -+ calc_output (filter, increment, start_filter_index, ch) ; -+ filter->out_gen ++ ; -+ } ; -+ -+ /* Figure out the next index. */ -+ input_index += 1.0 / src_ratio ; -+ -+ filter->b_current = (filter->b_current + filter->channels * lrint (floor (input_index))) % filter->b_len ; -+ input_index -= floor (input_index) ; -+ } ; -+ -+ psrc->last_position = input_index ; -+ -+ /* Save current ratio rather then target ratio. */ -+ psrc->last_ratio = src_ratio ; -+ -+ data->input_frames_used = filter->in_used / filter->channels ; -+ data->output_frames_gen = filter->out_gen / filter->channels ; -+ -+ return SRC_ERR_NO_ERROR ; -+} /* sinc_process */ -+ -+/*---------------------------------------------------------------------------------------- -+*/ -+ -+static void -+prepare_data (SINC_FILTER *filter, SRC_DATA *data, int half_filter_chan_len) -+{ int len = 0 ; -+ -+ if (filter->b_real_end >= 0) -+ return ; /* This doesn't make sense, so return. */ -+ -+ if (filter->b_current == 0) -+ { /* Initial state. Set up zeros at the start of the buffer and -+ ** then load new data after that. -+ */ -+ len = filter->b_len - 2 * half_filter_chan_len ; -+ -+ filter->b_current = filter->b_end = half_filter_chan_len ; -+ } -+ else if (filter->b_end + half_filter_chan_len + filter->channels < filter->b_len) -+ { /* Load data at current end position. */ -+ len = MAX (filter->b_len - filter->b_current - half_filter_chan_len, 0) ; -+ } -+ else -+ { /* Move data at end of buffer back to the start of the buffer. */ -+ len = filter->b_end - filter->b_current ; -+ memmove (filter->buffer, filter->buffer + filter->b_current - half_filter_chan_len, -+ (half_filter_chan_len + len) * sizeof (filter->buffer [0])) ; -+ -+ filter->b_current = half_filter_chan_len ; -+ filter->b_end = filter->b_current + len ; -+ -+ /* Now load data at current end of buffer. */ -+ len = MAX (filter->b_len - filter->b_current - half_filter_chan_len, 0) ; -+ } ; -+ -+ len = MIN (filter->in_count - filter->in_used, len) ; -+ len -= (len % filter->channels) ; -+ -+ memcpy (filter->buffer + filter->b_end, data->data_in + filter->in_used, -+ len * sizeof (filter->buffer [0])) ; -+ -+ filter->b_end += len ; -+ filter->in_used += len ; -+ -+ if (filter->in_used == filter->in_count && -+ filter->b_end - filter->b_current < 2 * half_filter_chan_len && data->end_of_input) -+ { /* Handle the case where all data in the current buffer has been -+ ** consumed and this is the last buffer. -+ */ -+ -+ if (filter->b_len - filter->b_end < half_filter_chan_len + 5) -+ { /* If necessary, move data down to the start of the buffer. */ -+ len = filter->b_end - filter->b_current ; -+ memmove (filter->buffer, filter->buffer + filter->b_current - half_filter_chan_len, -+ (half_filter_chan_len + len) * sizeof (filter->buffer [0])) ; -+ -+ filter->b_current = half_filter_chan_len ; -+ filter->b_end = filter->b_current + len ; -+ } ; -+ -+ filter->b_real_end = filter->b_end ; -+ len = half_filter_chan_len + 5 ; -+ -+ memset (filter->buffer + filter->b_end, 0, len * sizeof (filter->buffer [0])) ; -+ filter->b_end += len ; -+ } ; -+ -+ return ; -+} /* prepare_data */ -+ -+ -+static double -+calc_output (SINC_FILTER *filter, increment_t increment, increment_t start_filter_index, int ch) -+{ double fraction, left, right, icoeff ; -+ increment_t filter_index, max_filter_index ; -+ int data_index, coeff_count, indx ; -+ -+ /* Convert input parameters into fixed point. */ -+ max_filter_index = INT_TO_FP (filter->coeff_half_len) ; -+ -+ /* First apply the left half of the filter. */ -+ filter_index = start_filter_index ; -+ coeff_count = (max_filter_index - filter_index) / increment ; -+ filter_index = filter_index + coeff_count * increment ; -+ data_index = filter->b_current - filter->channels * coeff_count ; -+ -+ left = 0.0 ; -+ do -+ { fraction = FP_TO_DOUBLE (filter_index) ; -+ indx = FP_TO_INT (filter_index) ; -+ -+ icoeff = filter->coeffs [indx] + fraction * (filter->coeffs [indx + 1] - filter->coeffs [indx]) ; -+ -+ left += icoeff * filter->buffer [data_index + ch] ; -+ -+ filter_index -= increment ; -+ data_index = data_index + filter->channels ; -+ } -+ while (filter_index >= MAKE_INCREMENT_T (0)) ; -+ -+ /* Now apply the right half of the filter. */ -+ filter_index = increment - start_filter_index ; -+ coeff_count = (max_filter_index - filter_index) / increment ; -+ filter_index = filter_index + coeff_count * increment ; -+ data_index = filter->b_current + filter->channels * (1 + coeff_count) ; -+ -+ right = 0.0 ; -+ do -+ { fraction = FP_TO_DOUBLE (filter_index) ; -+ indx = FP_TO_INT (filter_index) ; -+ -+ icoeff = filter->coeffs [indx] + fraction * (filter->coeffs [indx + 1] - filter->coeffs [indx]) ; -+ -+ right += icoeff * filter->buffer [data_index + ch] ; -+ -+ filter_index -= increment ; -+ data_index = data_index - filter->channels ; -+ } -+ while (filter_index > MAKE_INCREMENT_T (0)) ; -+ -+ return (left + right) ; -+} /* calc_output */ -+ -diff -r -u --new-file k3b-r948463/libk3b/plugin/libsamplerate/src_zoh.c k3b-r948463.patched/libk3b/plugin/libsamplerate/src_zoh.c ---- k3b-r948463/libk3b/plugin/libsamplerate/src_zoh.c 1969-12-31 18:00:00.000000000 -0600 -+++ k3b-r948463.patched/libk3b/plugin/libsamplerate/src_zoh.c 2009-04-03 14:00:42.000000000 -0500 -@@ -0,0 +1,186 @@ -+/* -+** Copyright (C) 2002,2003 Erik de Castro Lopo <erikd@mega-nerd.com> -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** This program is distributed in the hope that it will be useful, -+** but WITHOUT ANY WARRANTY; without even the implied warranty of -+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+** GNU General Public License for more details. -+** -+** You should have received a copy of the GNU General Public License -+** along with this program; if not, write to the Free Software -+** Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+*/ -+ -+#include <stdio.h> -+#include <stdlib.h> -+#include <string.h> -+ -+#include "config-k3b.h" -+#include "float_cast.h" -+#include "common.h" -+ -+static void zoh_reset (SRC_PRIVATE *psrc) ; -+ -+/*======================================================================================== -+*/ -+ -+#define ZOH_MAGIC_MARKER MAKE_MAGIC('s','r','c','z','o','h') -+ -+typedef struct -+{ int zoh_magic_marker ; -+ int channels ; -+ long in_count, in_used ; -+ long out_count, out_gen ; -+ float last_value [1] ; -+} ZOH_DATA ; -+ -+/*---------------------------------------------------------------------------------------- -+*/ -+ -+int -+zoh_process (SRC_PRIVATE *psrc, SRC_DATA *data) -+{ ZOH_DATA *zoh ; -+ double src_ratio, input_index ; -+ int ch ; -+ -+ if (psrc->private_data == NULL) -+ return SRC_ERR_NO_PRIVATE ; -+ -+ zoh = (ZOH_DATA*) psrc->private_data ; -+ -+ zoh->in_count = data->input_frames * zoh->channels ; -+ zoh->out_count = data->output_frames * zoh->channels ; -+ zoh->in_used = zoh->out_gen = 0 ; -+ -+ src_ratio = psrc->last_ratio ; -+ input_index = psrc->last_position ; -+ -+ /* Calculate samples before first sample in input array. */ -+ while (input_index > 0.0 && input_index < 1.0 && zoh->out_gen < zoh->out_count) -+ { -+ if (zoh->in_used + input_index >= zoh->in_count) -+ break ; -+ -+ if (fabs (psrc->last_ratio - data->src_ratio) > SRC_MIN_RATIO_DIFF) -+ src_ratio = psrc->last_ratio + zoh->out_gen * (data->src_ratio - psrc->last_ratio) / (zoh->out_count - 1) ; -+ -+ for (ch = 0 ; ch < zoh->channels ; ch++) -+ { data->data_out [zoh->out_gen] = zoh->last_value [ch] ; -+ zoh->out_gen ++ ; -+ } ; -+ -+ /* Figure out the next index. */ -+ input_index += 1.0 / src_ratio ; -+ } ; -+ -+ zoh->in_used += zoh->channels * lrint (floor (input_index)) ; -+ input_index -= floor (input_index) ; -+ -+ /* Main processing loop. */ -+ while (zoh->out_gen < zoh->out_count && zoh->in_used + input_index < zoh->in_count) -+ { -+ if (fabs (psrc->last_ratio - data->src_ratio) > SRC_MIN_RATIO_DIFF) -+ src_ratio = psrc->last_ratio + zoh->out_gen * (data->src_ratio - psrc->last_ratio) / (zoh->out_count - 1) ; -+ -+ for (ch = 0 ; ch < zoh->channels ; ch++) -+ { data->data_out [zoh->out_gen] = data->data_in [zoh->in_used + ch] ; -+ zoh->out_gen ++ ; -+ } ; -+ -+ /* Figure out the next index. */ -+ input_index += 1.0 / src_ratio ; -+ -+ zoh->in_used += zoh->channels * lrint (floor (input_index)) ; -+ input_index -= floor (input_index) ; -+ } ; -+ -+ psrc->last_position = input_index ; -+ -+ if (zoh->in_used > 0) -+ for (ch = 0 ; ch < zoh->channels ; ch++) -+ zoh->last_value [ch] = data->data_in [zoh->in_used - zoh->channels + ch] ; -+ -+ /* Save current ratio rather then target ratio. */ -+ psrc->last_ratio = src_ratio ; -+ -+ data->input_frames_used = zoh->in_used / zoh->channels ; -+ data->output_frames_gen = zoh->out_gen / zoh->channels ; -+ -+ return SRC_ERR_NO_ERROR ; -+} /* zoh_process */ -+ -+/*------------------------------------------------------------------------------ -+*/ -+ -+const char* -+zoh_get_name (int src_enum) -+{ -+ if (src_enum == SRC_ZERO_ORDER_HOLD) -+ return "ZOH Interpolator" ; -+ -+ return NULL ; -+} /* zoh_get_name */ -+ -+const char* -+zoh_get_description (int src_enum) -+{ -+ if (src_enum == SRC_ZERO_ORDER_HOLD) -+ return "Zero order hold interpolator, very fast, poor quality." ; -+ -+ return NULL ; -+} /* zoh_get_descrition */ -+ -+int -+zoh_set_converter (SRC_PRIVATE *psrc, int src_enum) -+{ ZOH_DATA *zoh = NULL; -+ -+ if (src_enum != SRC_ZERO_ORDER_HOLD) -+ return SRC_ERR_BAD_CONVERTER ; -+ -+ if (psrc->private_data != NULL) -+ { zoh = (ZOH_DATA*) psrc->private_data ; -+ if (zoh->zoh_magic_marker != ZOH_MAGIC_MARKER) -+ { free (psrc->private_data) ; -+ psrc->private_data = NULL ; -+ } ; -+ } ; -+ -+ if (psrc->private_data == NULL) -+ { zoh = calloc (1, sizeof (*zoh) + psrc->channels * sizeof (float)) ; -+ if (zoh == NULL) -+ return SRC_ERR_MALLOC_FAILED ; -+ psrc->private_data = zoh ; -+ } ; -+ -+ zoh->zoh_magic_marker = ZOH_MAGIC_MARKER ; -+ zoh->channels = psrc->channels ; -+ -+ psrc->process = zoh_process ; -+ psrc->reset = zoh_reset ; -+ -+ zoh_reset (psrc) ; -+ -+ return SRC_ERR_NO_ERROR ; -+} /* zoh_set_converter */ -+ -+/*=================================================================================== -+*/ -+ -+static void -+zoh_reset (SRC_PRIVATE *psrc) -+{ ZOH_DATA *zoh ; -+ -+ zoh = (ZOH_DATA*) psrc->private_data ; -+ if (zoh == NULL) -+ return ; -+ -+ zoh->channels = psrc->channels ; -+ memset (zoh->last_value, 0, sizeof (zoh->last_value [0]) * zoh->channels) ; -+ -+ return ; -+} /* zoh_reset */ -diff -r -u --new-file k3b-r948463/plugins/decoder/wave/k3bwavedecoder.cpp k3b-r948463.patched/plugins/decoder/wave/k3bwavedecoder.cpp ---- k3b-r948463/plugins/decoder/wave/k3bwavedecoder.cpp 2009-04-03 01:16:04.000000000 -0500 -+++ k3b-r948463.patched/plugins/decoder/wave/k3bwavedecoder.cpp 2009-04-03 14:00:42.000000000 -0500 -@@ -344,7 +344,7 @@ - else if( name == i18n("Sampling Rate") ) - return i18n("%1 Hz",d->sampleRate); - else if( name == i18n("Sample Size") ) -- return i18np("1 bit","%1 bits",d->sampleSize); -+ return i18n("%1 bits",d->sampleSize); - else - return QString(); - } diff --git a/source/kde/k3b/local.options b/source/kde/k3b/local.options index 6122f1141..c085ca955 100644 --- a/source/kde/k3b/local.options +++ b/source/kde/k3b/local.options @@ -1 +1,2 @@ -VERSION=1.66.0 +VERSION=1.91.0 +BUILD=3 diff --git a/source/kde/kaudiocreator/kaudiocreator.SlackBuild b/source/kde/kaudiocreator/kaudiocreator.SlackBuild index c54d53eb8..2a8dfc0f0 100755 --- a/source/kde/kaudiocreator/kaudiocreator.SlackBuild +++ b/source/kde/kaudiocreator/kaudiocreator.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -53,16 +53,19 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +mkdir build +cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX=/usr \ -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ - . + .. make $NUMJOBS || exit 1 make install DESTDIR=$PKG || exit 1 +cd - if [ -d $PKG/usr/man ]; then gzip -9 $PKG/usr/man/man?/* @@ -71,10 +74,8 @@ fi mkdir -p $PKG/usr/doc/kaudiocreator-$VERSION cp -a COPYING* TODO $PKG/usr/doc/kaudiocreator-$VERSION -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/kde/kaudiocreator/local.options b/source/kde/kaudiocreator/local.options index 977577b09..9ec4f05c6 100644 --- a/source/kde/kaudiocreator/local.options +++ b/source/kde/kaudiocreator/local.options @@ -1 +1,2 @@ -VERSION=r1008583 +VERSION=r1118889 +BUILD=1 diff --git a/source/kde/kaudiocreator/slack-desc b/source/kde/kaudiocreator/slack-desc index 607c15fde..3de377236 100644 --- a/source/kde/kaudiocreator/slack-desc +++ b/source/kde/kaudiocreator/slack-desc @@ -8,7 +8,7 @@ |-----handy-ruler-----------------------------------------------| kaudiocreator: kaudiocreator (CD ripper and audio encoder) kaudiocreator: -kaudiocreator: kaudiocreater is a kde frontend for ripping and encoding audio +kaudiocreator: kaudiocreater is a KDE frontend for ripping and encoding audio kaudiocreator: to/from optical media. kaudiocreator: kaudiocreator: diff --git a/source/kde/kdeaccessibility/kdeaccessibility.SlackBuild b/source/kde/kdeaccessibility/kdeaccessibility.SlackBuild index 96b5247f1..0f65ef6b1 100755 --- a/source/kde/kdeaccessibility/kdeaccessibility.SlackBuild +++ b/source/kde/kdeaccessibility/kdeaccessibility.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdeaccessibility/slack-desc b/source/kde/kdeaccessibility/slack-desc index dd06f475c..91669ef7d 100644 --- a/source/kde/kdeaccessibility/slack-desc +++ b/source/kde/kdeaccessibility/slack-desc @@ -6,7 +6,7 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdeaccessibility: kdeaccessibility +kdeaccessibility: kdeaccessibility (Accessibility programs for KDE) kdeaccessibility: kdeaccessibility: KDE accessibility programs, including kmag (a screen magnifier), kdeaccessibility: kmousetool (clicks the mouse for you), and kmouth (a speech diff --git a/source/kde/kdeadmin/kdeadmin.SlackBuild b/source/kde/kdeadmin/kdeadmin.SlackBuild index 43a41da35..621d03c27 100755 --- a/source/kde/kdeadmin/kdeadmin.SlackBuild +++ b/source/kde/kdeadmin/kdeadmin.SlackBuild @@ -53,9 +53,13 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +zcat $CWD/knetworkconf.diff.gz | patch -p1 --verbose || exit 1 + mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ + --with-shadow \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ @@ -63,6 +67,8 @@ cd build -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + -DKU_FIRSTGID=1000 \ + -DKU_FIRSTUID=1000 \ .. make $NUMJOBS || exit 1 make install DESTDIR=$PKG || exit 1 diff --git a/source/kde/kdeadmin/knetworkconf.diff b/source/kde/kdeadmin/knetworkconf.diff new file mode 100644 index 000000000..ed5dbeeb3 --- /dev/null +++ b/source/kde/kdeadmin/knetworkconf.diff @@ -0,0 +1,137 @@ +--- ./knetworkconf/backends/platform.pl.cmake.orig 2009-07-28 14:43:49.000000000 -0500 ++++ ./knetworkconf/backends/platform.pl.cmake 2010-05-03 20:53:00.000000000 -0500 +@@ -93,6 +93,9 @@ + "slackware-9.1.0" => "Slackware 9.1.0", + "slackware-10.0.0" => "Slackware 10.0.0", + "slackware-10.1.0" => "Slackware 10.1.0", ++ "slackware-12.2.0" => "Slackware 12.2.0", ++ "slackware-13.0.0.0.0" => "Slackware 13.0.0.0.0", ++ "slackware-13.1.0" => "Slackware 13.1.0", + "freebsd-4" => "FreeBSD 4", + "freebsd-5" => "FreeBSD 5", + "freebsd-6" => "FreeBSD 6", +--- ./knetworkconf/backends/network-conf.cmake.orig 2009-07-28 14:43:49.000000000 -0500 ++++ ./knetworkconf/backends/network-conf.cmake 2010-05-03 20:53:48.000000000 -0500 +@@ -77,7 +77,8 @@ + "mandriva-2006.1", "mandriva-2007.0", "mandriva-2007.1", "mandriva-2008.0", "mandriva-2008.1", + "mandriva-2009.0", "mandriva-2009.1", "mandriva-2010.0", + "vine-3.0", "vine-3.1", +- "slackware-9.1.0", "slackware-10.0.0", "slackware-10.1.0", ++ "slackware-9.1.0", "slackware-10.0.0", "slackware-10.1.0", "slackware-12.2.0", "slackware-13.0.0.0.0", ++ "slackware-13.1.0", + "gentoo", "vlos-1.2", "freebsd-5", "freebsd-6", "ark"); + + $description =<<"end_of_description;"; +--- ./knetworkconf/backends/service.pl.cmake.orig 2009-07-28 14:43:49.000000000 -0500 ++++ ./knetworkconf/backends/service.pl.cmake 2010-05-03 20:54:07.000000000 -0500 +@@ -281,6 +281,9 @@ + "slackware-9.1.0" => "slackware-9.1.0", + "slackware-10.0.0" => "slackware-9.1.0", + "slackware-10.1.0" => "slackware-9.1.0", ++ "slackware-12.2.0" => "slackware-9.1.0", ++ "slackware-13.0.0.0.0" => "slackware-9.1.0", ++ "slackware-13.1.0" => "slackware-9.1.0", + + "gentoo" => "gentoo", + "vlos-1.2" => "gentoo", +@@ -314,7 +317,11 @@ + "nonetwork" => "RECOVER" + }, + "freebsd-5" => {"rc" => "GRAPHICAL" }, +- "slackware-9.1.0" => {"4" => "GRAPHICAL" } ++ "slackware-9.1.0" => {"0" => "HALT", ++ "3" => "NONE", ++ "4" => "GRAPHICAL", ++ "6" => "REBOOT" ++ } + ); + + $distro = $dist_map{$gst_dist}; +--- ./knetworkconf/backends/network.pl.cmake.orig 2009-07-28 14:43:49.000000000 -0500 ++++ ./knetworkconf/backends/network.pl.cmake 2010-05-03 20:55:09.000000000 -0500 +@@ -537,6 +537,9 @@ + "slackware-9.1.0" => "redhat-6.2", + "slackware-10.0.0" => "redhat-6.2", + "slackware-10.1.0" => "redhat-6.2", ++ "slackware-12.2.0" => "redhat-6.2", ++ "slackware-13.0.0.0.0" => "redhat-6.2", ++ "slackware-13.1.0" => "redhat-6.2", + "gentoo" => "debian-2.2", + "vlos-1.2" => "debian-2.2", + "freebsd-5" => "debian-2.2", +@@ -1839,6 +1842,9 @@ + "slackware-9.1.0" => \&gst_network_deb22_get_file, + "slackware-10.0.0" => \&gst_network_deb22_get_file, + "slackware-10.1.0" => \&gst_network_deb22_get_file, ++ "slackware-12.2.0" => \&gst_network_deb22_get_file, ++ "slackware-13.0.0.0.0" => \&gst_network_deb22_get_file, ++ "slackware-13.1.0" => \&gst_network_deb22_get_file, + "gentoo" => \&gst_network_deb22_get_file, + "freebsd-5" => \&gst_network_deb22_get_file, + "freebsd-6" => \&gst_network_deb22_get_file, +@@ -3961,6 +3967,9 @@ + "slackware-9.1.0" => "", + "slackware-10.0.0" => "", + "slackware-10.1.0" => "", ++ "slackware-12.2.0" => "", ++ "slackware-13.0.0.0.0" => "", ++ "slackware-13.1.0" => "", + "gentoo" => "", + "vlos-1.2" => "", + "freebsd-5" => "", +@@ -4109,6 +4118,9 @@ + "slackware-9.1.0" => "slackware-9.1.0", + "slackware-10.0.0" => "slackware-9.1.0", + "slackware-10.1.0" => "slackware-9.1.0", ++ "slackware-12.2.0" => "slackware-9.1.0", ++ "slackware-13.0.0.0.0" => "slackware-9.1.0", ++ "slackware-13.1.0" => "slackware-9.1.0", + "gentoo" => "gentoo", + "vlos-1.2" => "vlos-1.2", + "freebsd-5" => "freebsd-5", +@@ -4392,6 +4404,7 @@ + [ "hostname", \&gst_parse_fq_hostname, HOSTNAME ], + [ "nameserver", \&gst_parse_split_all_unique_hash_comment, RESOLV_CONF, "nameserver", "[ \t]+" ], + [ "searchdomain", \&gst_parse_split_first_array_unique, RESOLV_CONF, "search", "[ \t]+", "[ \t]+" ], ++ [ "domain", \&gst_parse_fq_domain, HOSTNAME ], + [ "domain", \&gst_parse_split_first_str, RESOLV_CONF, "domain", "[ \t]+" ], + [ "order", \&gst_parse_split_first_array, HOST_CONF, "order", "[ \t]+", ",[ \t]*" ], + [ "hostmatch", \&gst_parse_split_first_bool, HOST_CONF, "multi", "[ \t]+" ], +@@ -4608,6 +4621,9 @@ + "slackware-9.1.0" => "slackware-9.1.0", + "slackware-10.0.0" => "slackware-9.1.0", + "slackware-10.1.0" => "slackware-9.1.0", ++ "slackware-12.2.0" => "slackware-9.1.0", ++ "slackware-13.0.0.0.0" => "slackware-9.1.0", ++ "slackware-13.1.0" => "slackware-9.1.0", + "gentoo" => "gentoo", + "vlos-1.2" => "vlos-1.2", + "freebsd-5" => "freebsd-5", +@@ -5502,6 +5518,9 @@ + "slackware-9.1.0" => "slackware-9.1.0", + "slackware-10.0.0" => "slackware-9.1.0", + "slackware-10.1.0" => "slackware-9.1.0", ++ "slackware-12.2.0" => "slackware-9.1.0", ++ "slackware-13.0.0.0.0" => "slackware-9.1.0", ++ "slackware-13.1.0" => "slackware-9.1.0", + "gentoo" => "gentoo", + "vlos-1.2" => "vlos-1.2", + "freebsd-5" => "freebsd-5", +@@ -5772,6 +5791,7 @@ + [ "hostname", \&gst_replace_fq_hostname, HOSTNAME, "%hostname%", "%domain%" ], + [ "hostname", \&gst_network_run_hostname ], + [ "gateway", \&gst_replace_rcinet1conf_global, RC_INET_CONF, GATEWAY ], ++ [ "domain", \&gst_parse_fq_domain, HOSTNAME ], + [ "domain", \&gst_replace_join_first_str, RESOLV_CONF, "domain", "[ \t]+" ], + [ "nameserver", \&gst_replace_join_all, RESOLV_CONF, "nameserver", "[ \t]+" ], + [ "searchdomain", \&gst_replace_join_first_array, RESOLV_CONF, "search", "[ \t]+", "[ \t]+" ], +@@ -5951,6 +5971,9 @@ + "slackware-9.1.0" => "slackware-9.1.0", + "slackware-10.0.0" => "slackware-9.1.0", + "slackware-10.1.0" => "slackware-9.1.0", ++ "slackware-12.2.0" => "slackware-9.1.0", ++ "slackware-13.0.0.0.0" => "slackware-9.1.0", ++ "slackware-13.1.0" => "slackware-9.1.0", + "gentoo" => "gentoo", + "vlos-1.2" => "vlos-1.2", + "freebsd-5" => "freebsd-5", diff --git a/source/kde/kdeadmin/slack-desc b/source/kde/kdeadmin/slack-desc index 644f44e5c..cef430766 100644 --- a/source/kde/kdeadmin/slack-desc +++ b/source/kde/kdeadmin/slack-desc @@ -7,7 +7,7 @@ # leave one space after the ':'. |-----handy-ruler---------------------------------------------------| -kdeadmin: kdeadmin +kdeadmin: kdeadmin (System Administration tools) kdeadmin: kdeadmin: KDE system administration tools. kdeadmin: diff --git a/source/kde/kdeartwork/kdeartwork.SlackBuild b/source/kde/kdeartwork/kdeartwork.SlackBuild index 4000569a4..02c197e8c 100755 --- a/source/kde/kdeartwork/kdeartwork.SlackBuild +++ b/source/kde/kdeartwork/kdeartwork.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ @@ -63,6 +64,7 @@ cd build -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + -DKSCREENSAVER_SOUND_SUPPORT=ON \ .. make $NUMJOBS || exit 1 make install DESTDIR=$PKG || exit 1 diff --git a/source/kde/kdeartwork/slack-desc b/source/kde/kdeartwork/slack-desc index 005f4aeab..cc5f6f18e 100644 --- a/source/kde/kdeartwork/slack-desc +++ b/source/kde/kdeartwork/slack-desc @@ -6,7 +6,7 @@ # leave one space after the ':'. |-----handy-ruler-------------------------------------------------| -kdeartwork: kdeartwork +kdeartwork: kdeartwork (Artwork for KDE) kdeartwork: kdeartwork: Additional themes, screensavers, sounds, wallpapers, and window kdeartwork: styles. diff --git a/source/kde/kdebase-runtime/kdebase-runtime-text-render-969192.diff b/source/kde/kdebase-runtime/kdebase-runtime-text-render-969192.diff deleted file mode 100644 index 811f922e3..000000000 --- a/source/kde/kdebase-runtime/kdebase-runtime-text-render-969192.diff +++ /dev/null @@ -1,14 +0,0 @@ -Index: trunk/KDE/kdebase/runtime/kstyles/oxygen/oxygen.cpp -=================================================================== ---- trunk/KDE/kdebase/runtime/kstyles/oxygen/oxygen.cpp (revision 969191) -+++ trunk/KDE/kdebase/runtime/kstyles/oxygen/oxygen.cpp (revision 969192) -@@ -3067,7 +3067,8 @@ - - if (const QStyleOptionToolButton* tbOpt = qstyleoption_cast<const QStyleOptionToolButton*>(option)) { - if ((!tbOpt->icon.isNull()) && (!tbOpt->text.isEmpty()) && tbOpt->toolButtonStyle == Qt::ToolButtonTextUnderIcon) -- size.setHeight(size.height()-9); -+ // TODO: Make this font size dependent -+ size.setHeight(size.height()-5); - } - - // We want to avoid super-skiny buttons, for things like "up" when icons + text diff --git a/source/kde/kdebase-runtime/kdebase-runtime.SlackBuild b/source/kde/kdebase-runtime/kdebase-runtime.SlackBuild index 90b25549d..0b2cddc80 100755 --- a/source/kde/kdebase-runtime/kdebase-runtime.SlackBuild +++ b/source/kde/kdebase-runtime/kdebase-runtime.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -47,9 +47,6 @@ echo "Building kdebase-runtime-$VERSION..." tar xvf $CWD/../src/kdebase-runtime-$VERSION.tar.?z* || exit 1 cd kdebase-runtime-$VERSION -# Fix a bug where the top and bottom of text is improperly cropped: -zcat $CWD/kdebase-runtime-text-render-969192.diff.gz | patch -p4 --verbose || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -60,6 +57,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdebase-runtime/slack-desc b/source/kde/kdebase-runtime/slack-desc index 0b8de17be..09bf5774f 100644 --- a/source/kde/kdebase-runtime/slack-desc +++ b/source/kde/kdebase-runtime/slack-desc @@ -5,7 +5,7 @@ # exactly 11 lines for the formatting to be correct. It's also customary to # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdebase-runtime: kdebase-runtime +kdebase-runtime: kdebase-runtime (KDE runtime core) kdebase-runtime: kdebase-runtime: This package contains core components of the KDE base runtime module. kdebase-runtime: diff --git a/source/kde/kdebase-workspace/kcmshell_root_privilege.patch b/source/kde/kdebase-workspace/kcmshell_root_privilege.patch new file mode 100644 index 000000000..f81a98ed9 --- /dev/null +++ b/source/kde/kdebase-workspace/kcmshell_root_privilege.patch @@ -0,0 +1,43 @@ +--- kdebase-workspace-4.3.85/systemsettings/core/ModuleView.cpp~ 2009-12-11 00:14:03.000000000 +0100 ++++ kdebase-workspace-4.3.85/systemsettings/core/ModuleView.cpp 2009-12-22 15:47:35.000000000 +0100 +@@ -40,6 +40,7 @@ + #include <KCModuleProxy> + #include <KStandardGuiItem> + #include <KDialogButtonBox> ++#include <KStandardDirs> + #include <kauthaction.h> + + #include "MenuItem.h" +@@ -129,6 +130,32 @@ + return; + } + ++ if ( menuItem->service()->property( "X-KDE-RootOnly", QVariant::Bool ).toBool() ) { ++ QString kdesu = KStandardDirs::findExe( "kdesu" ); ++ QString cmd = menuItem->service()->exec().trimmed(); ++ ++ /* Prepare the process to run the kcmshell */ ++ if ( cmd.left(5) == "kdesu" ) ++ { ++ cmd = cmd.remove(0,5).trimmed(); ++ ++ /* Remove all kdesu switches */ ++ while ( cmd.length() > 1 && cmd[ 0 ] == '-' ) ++ cmd = cmd.remove( 0, cmd.indexOf( ' ' ) ).trimmed(); ++ } ++ ++ if ( cmd.left(9) == "kcmshell4" ) ++ cmd = cmd.remove(0,9).trimmed(); ++ ++ QStringList args; ++ args << "-i" << QString( menuItem->service()->icon() ) << "-c" << QString( "%1 %2 --lang %3" ).arg( KStandardDirs::locate("exe", "kcmshell4") ).arg( cmd ).arg( KGlobal::locale()->language() ); ++ ++ kDebug() << "Starting root module: " << args; ++ QProcess::startDetached( kdesu, args ); ++ ++ return; ++ } ++ + QList<KCModuleInfo*> modules; + if ( menuItem->children().empty() ) { + modules << &menuItem->item(); diff --git a/source/kde/kdebase-workspace/kdebase-workspace.SlackBuild b/source/kde/kdebase-workspace/kdebase-workspace.SlackBuild index 63e5b2512..1dd46d610 100755 --- a/source/kde/kdebase-workspace/kdebase-workspace.SlackBuild +++ b/source/kde/kdebase-workspace/kdebase-workspace.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -53,9 +53,15 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +cat $CWD/kcmshell_root_privilege.patch | patch -p1 --verbose || exit 1 + +# Increase the timeout to accomodate slow-to-initialize video chipset drivers: +zcat $CWD/kdebase-workspace.kdm.server.timeout.diff.gz | patch -p1 --verbose || exit 1 + mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ @@ -72,6 +78,8 @@ if [ -d $PKG/usr/man ]; then gzip -9 $PKG/usr/man/man?/* fi +# Use ck-launch-session in runlevel 3, +# to start and attach a ConsoleKit session to the X session: mkdir -p $PKG/etc/X11/xinit cat $CWD/xinit/xinitrc.kde > $PKG/etc/X11/xinit/xinitrc.kde chmod 0755 $PKG/etc/X11/xinit/xinitrc.kde @@ -96,6 +104,9 @@ mkdir -p $PKG/etc/kde mv $PKG/usr/share/config/kdm $PKG/etc/kde ( cd $PKG/usr/share/config ; ln -sf ../../../etc/kde/kdm . ) +# Move the polkit dbus configuration files to the proper place: +mv $PKG/etc/kde/dbus-1 $PKG/etc/ + # This is fubar: rm -f $PKG/usr/share/icons/hicolor/index.theme diff --git a/source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff b/source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff new file mode 100644 index 000000000..56deff547 --- /dev/null +++ b/source/kde/kdebase-workspace/kdebase-workspace.kdm.server.timeout.diff @@ -0,0 +1,14 @@ +--- ./kdm/config.def.orig 2010-02-26 12:32:20.000000000 -0600 ++++ ./kdm/config.def 2010-05-03 22:11:48.000000000 -0500 +@@ -1332,9 +1332,9 @@ + + Key: ServerTimeout + Type: int +-Default: 15 ++Default: 45 + User: core +-Instance: #:*/ ++Instance: :*/ + Comment: + How long to wait for a local &X-Server; to come up. + Description: diff --git a/source/kde/kdebase-workspace/slack-desc b/source/kde/kdebase-workspace/slack-desc index e828d208f..87f2c4182 100644 --- a/source/kde/kdebase-workspace/slack-desc +++ b/source/kde/kdebase-workspace/slack-desc @@ -1,8 +1,8 @@ |-----handy-ruler------------------------------------------------------| -kdebase-workspace: kdebase-workspace - the KDE Workspace +kdebase-workspace: kdebase-workspace (KDE Plasma Desktop) kdebase-workspace: -kdebase-workspace: The KDE Workspace (kdebase-workspace) package consists of what is -kdebase-workspace: essentially the KDE workspace presented to the user. +kdebase-workspace: This package provides the essential parts of the KDE Plasma Desktop +kdebase-workspace: that are presented to the user. kdebase-workspace: kdebase-workspace: kdebase-workspace: diff --git a/source/kde/kdebase-workspace/xinit/xinitrc.kde b/source/kde/kdebase-workspace/xinit/xinitrc.kde index 2fda1fab2..5e11a9ac7 100755 --- a/source/kde/kdebase-workspace/xinit/xinitrc.kde +++ b/source/kde/kdebase-workspace/xinit/xinitrc.kde @@ -25,4 +25,4 @@ if [ -f $usermodmap ]; then fi # Start the window manager: -startkde +ck-launch-session startkde diff --git a/source/kde/kdebase/kdebase.SlackBuild b/source/kde/kdebase/kdebase.SlackBuild index 54a01f2a7..89ff3a503 100755 --- a/source/kde/kdebase/kdebase.SlackBuild +++ b/source/kde/kdebase/kdebase.SlackBuild @@ -46,6 +46,7 @@ cd $TMP echo "Building kdebase-$VERSION..." tar xvf $CWD/../src/kdebase-$VERSION.tar.?z* || exit 1 cd kdebase-$VERSION + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -56,6 +57,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ @@ -63,6 +65,7 @@ cd build -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + -DRUN_KAPPFINDER=ON \ .. make $NUMJOBS || exit 1 make install DESTDIR=$PKG || exit 1 @@ -84,7 +87,7 @@ chmod 0755 $PKG/etc/profile.d/* # still documented in the help manual. Here's a way to get the same # thing, and it works here, but I honestly don't know how it will act # everywhere with every shell. I just know it works with bash and ksh -sed -i 's/Exec=konsole/Exec=konsole -e $SHELL -l/' \ +sed -i -e 's/Exec=konsole/Exec=konsole -e $SHELL -l/' \ $PKG/usr/share/applications/kde4/konsole.desktop ## I find this a little bit too bright... <change by pjv> diff --git a/source/kde/kdebase/module_manager_include.diff b/source/kde/kdebase/module_manager_include.diff new file mode 100644 index 000000000..498b2afb0 --- /dev/null +++ b/source/kde/kdebase/module_manager_include.diff @@ -0,0 +1,19 @@ +--- trunk/KDE/kdebase/apps/konqueror/sidebar/module_manager.h 2009/11/13 18:46:51 1048689 ++++ trunk/KDE/kdebase/apps/konqueror/sidebar/module_manager.h 2010/01/07 20:09:11 1071281 +@@ -18,6 +18,9 @@ + Boston, MA 02110-1301, USA. + */ + ++#ifndef MODULE_MANAGER_H ++#define MODULE_MANAGER_H ++ + #include <QStringList> + #include <kservice.h> + class KConfigGroup; +@@ -74,3 +77,5 @@ + KConfigGroup *m_config; // owned by SidebarWidget + QString m_localPath; // local path + }; ++ ++#endif + diff --git a/source/kde/kdebase/slack-desc b/source/kde/kdebase/slack-desc index 34e3c5d08..bf91423e9 100644 --- a/source/kde/kdebase/slack-desc +++ b/source/kde/kdebase/slack-desc @@ -6,11 +6,11 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdebase: kdebase (KDE base package) +kdebase: kdebase (KDE core applications and files) +kdebase: +kdebase: This package provides the core applications and infrastructure files +kdebase: for the KDE Plasma Desktop. kdebase: -kdebase: kdebase is the second mandatory package (besides kdelibs) for the -kdebase: K Desktop Environment. Here we have various applications and -kdebase: infrastructure files and libraries. kdebase: kdebase: kdebase: diff --git a/source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff b/source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff new file mode 100644 index 000000000..0f2edc125 --- /dev/null +++ b/source/kde/kdebindings/kdebindings-len-ptr-rfloat.diff @@ -0,0 +1,207 @@ +--- kdebindings-4.3.0/ruby/krossruby/rubyfunction.h.org 2008-07-29 05:47:40.000000000 -0600 ++++ kdebindings-4.3.0/ruby/krossruby/rubyfunction.h 2009-08-09 03:04:00.105143195 -0600 +@@ -88,11 +88,11 @@ + //#endif + VALUE info = rb_gv_get("$!"); + VALUE bt = rb_funcall(info, rb_intern("backtrace"), 0); +- VALUE message = RARRAY(bt)->ptr[0]; ++ VALUE message = RARRAY_PTR(bt)[0]; + fprintf(stderr,"%s: %s (%s)\n", STR2CSTR(message), STR2CSTR(rb_obj_as_string(info)), rb_class2name(CLASS_OF(info))); +- for(int i = 1; i < RARRAY(bt)->len; ++i) +- if( TYPE(RARRAY(bt)->ptr[i]) == T_STRING ) +- fprintf(stderr,"\tfrom %s\n", STR2CSTR(RARRAY(bt)->ptr[i])); ++ for(int i = 1; i < RARRAY_LEN(bt); ++i) ++ if( TYPE(RARRAY_PTR(bt)[i]) == T_STRING ) ++ fprintf(stderr,"\tfrom %s\n", STR2CSTR(RARRAY_PTR(bt)[i])); + //ruby_nerrs++; + return Qnil; + } +--- kdebindings-4.3.0/ruby/krossruby/rubyobject.cpp.org 2008-06-18 06:41:05.000000000 -0600 ++++ kdebindings-4.3.0/ruby/krossruby/rubyobject.cpp 2009-08-08 21:55:21.209147733 -0600 +@@ -34,7 +34,7 @@ + + VALUE info = rb_gv_get("$!"); + VALUE bt = rb_funcall(info, rb_intern("backtrace"), 0); +- VALUE message = RARRAY(bt)->ptr[0]; ++ VALUE message = RARRAY_PTR(bt)[0]; + + QString errormessage = QString("%1: %2 (%3)") + .arg( STR2CSTR(message) ) +@@ -43,9 +43,9 @@ + fprintf(stderr, "%s\n", errormessage.toLatin1().data()); + + QString tracemessage; +- for(int i = 1; i < RARRAY(bt)->len; ++i) { +- if( TYPE(RARRAY(bt)->ptr[i]) == T_STRING ) { +- QString s = QString("%1\n").arg( STR2CSTR(RARRAY(bt)->ptr[i]) ); ++ for(int i = 1; i < RARRAY_LEN(bt); ++i) { ++ if( TYPE(RARRAY_PTR(bt)[i]) == T_STRING ) { ++ QString s = QString("%1\n").arg( STR2CSTR(RARRAY_PTR(bt)[i]) ); + Q_ASSERT( ! s.isNull() ); + tracemessage += s; + fprintf(stderr, "\t%s", s.toLatin1().data()); +@@ -74,7 +74,7 @@ + ID functionId = rb_ary_entry(args, 1); + VALUE arguments = rb_ary_entry(args, 2); + Q_ASSERT( TYPE(arguments) == T_ARRAY ); +- return rb_funcall2(self, functionId, RARRAY(arguments)->len, RARRAY(arguments)->ptr); ++ return rb_funcall2(self, functionId, RARRAY_LEN(arguments), RARRAY_PTR(arguments)); + } + + class RubyObject::Private +@@ -112,8 +112,8 @@ + VALUE methods; + const char* method; + methods = rb_class_instance_methods(1, args, CLASS_OF(object)); +- for (int i = 0; i < RARRAY(methods)->len; i++) { +- method = StringValuePtr(RARRAY(methods)->ptr[i]); ++ for (int i = 0; i < RARRAY_LEN(methods); i++) { ++ method = StringValuePtr(RARRAY_PTR(methods)[i]); + krossdebug( QString("RubyObject::RubyObject() method=%1").arg( method )); + d->calls << method; + } +--- kdebindings-4.3.0/ruby/krossruby/rubyscript.cpp.org 2009-01-16 08:04:29.000000000 -0700 ++++ kdebindings-4.3.0/ruby/krossruby/rubyscript.cpp 2009-08-08 21:51:36.729148567 -0600 +@@ -47,7 +47,7 @@ + + VALUE info = rb_gv_get("$!"); + VALUE bt = rb_funcall(info, rb_intern("backtrace"), 0); +- VALUE message = RARRAY(bt)->ptr[0]; ++ VALUE message = RARRAY_PTR(bt)[0]; + + QString errormessage = QString("%1: %2 (%3)") + .arg( STR2CSTR(message) ) +@@ -56,9 +56,9 @@ + fprintf(stderr, "%s\n", errormessage.toLatin1().data()); + + QString tracemessage; +- for(int i = 1; i < RARRAY(bt)->len; ++i) { +- if( TYPE(RARRAY(bt)->ptr[i]) == T_STRING ) { +- QString s = QString("%1\n").arg( STR2CSTR(RARRAY(bt)->ptr[i]) ); ++ for(int i = 1; i < RARRAY_LEN(bt); ++i) { ++ if( TYPE(RARRAY_PTR(bt)[i]) == T_STRING ) { ++ QString s = QString("%1\n").arg( STR2CSTR(RARRAY_PTR(bt)[i]) ); + Q_ASSERT( ! s.isNull() ); + tracemessage += s; + fprintf(stderr, "\t%s", s.toLatin1().data()); +@@ -361,7 +361,7 @@ + ID functionId = rb_ary_entry(args, 1); + VALUE arguments = rb_ary_entry(args, 2); + Q_ASSERT( TYPE(arguments) == T_ARRAY ); +- return rb_funcall2(self, functionId, RARRAY(arguments)->len, RARRAY(arguments)->ptr); ++ return rb_funcall2(self, functionId, RARRAY_LEN(arguments), RARRAY_PTR(arguments)); + } + + QVariant RubyScript::callFunction(const QString& name, const QVariantList& args) +--- kdebindings-4.3.0/ruby/krossruby/rubyvariant.cpp.org 2008-11-19 03:17:32.000000000 -0700 ++++ kdebindings-4.3.0/ruby/krossruby/rubyvariant.cpp 2009-08-08 21:42:27.593112416 -0600 +@@ -487,7 +487,7 @@ + #endif + QList<void*> list; + if( TYPE(value) == T_ARRAY ) { +- for(int i = 0; i < RARRAY(value)->len; i++) ++ for(int i = 0; i < RARRAY_LEN(value); i++) + if( void *ptr = VoidList::extractVoidStar(rb_ary_entry(value, i)) ) + list << ptr; + } +--- kdebindings-4.3.0/ruby/krossruby/rubyvariant.h.org 2008-07-29 05:47:40.000000000 -0600 ++++ kdebindings-4.3.0/ruby/krossruby/rubyvariant.h 2009-08-09 02:51:01.845117051 -0600 +@@ -124,7 +124,7 @@ + case T_BIGNUM: + return rb_big2int(value); + case T_FLOAT: +- return (int)(RFLOAT(value)->value); ++ return (int)(RFLOAT_VALUE(value)); + default: + break; + } +@@ -147,7 +147,7 @@ + case T_BIGNUM: + return rb_big2uint(value); + case T_FLOAT: +- return (uint)(RFLOAT(value)->value); ++ return (uint)(RFLOAT_VALUE(value)); + default: + break; + } +@@ -226,7 +226,7 @@ + //return STR2CSTR( rb_inspect(value) ); + return QByteArray(""); + } +- long length = LONG2NUM( RSTRING(value)->len ); ++ long length = LONG2NUM( RSTRING_LEN(value) ); + if( length < 0 ) + return QByteArray(""); + char* ca = rb_str2cstr(value, &length); +@@ -261,7 +261,7 @@ + return l; + } + inline static QSize toVariant(VALUE value) { +- if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 2 ) { ++ if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 2 ) { + rb_raise(rb_eTypeError, "QSize must be an array with 2 elements"); + return QSize(); + } +@@ -280,7 +280,7 @@ + return l; + } + inline static QSizeF toVariant(VALUE value) { +- if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 2 ) { ++ if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 2 ) { + rb_raise(rb_eTypeError, "QSizeF must be an array with 2 elements"); + return QSizeF(); + } +@@ -300,7 +300,7 @@ + return l; + } + inline static QPoint toVariant(VALUE value) { +- if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 2 ) { ++ if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 2 ) { + rb_raise(rb_eTypeError, "QPoint must be an array with 2 elements"); + return QPoint(); + } +@@ -319,7 +319,7 @@ + return l; + } + inline static QPointF toVariant(VALUE value) { +- if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 2 ) { ++ if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 2 ) { + rb_raise(rb_eTypeError, "QPointF must be an array with 2 elements"); + return QPointF(); + } +@@ -340,7 +340,7 @@ + return l; + } + inline static QRect toVariant(VALUE value) { +- if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 4 ) { ++ if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 4 ) { + rb_raise(rb_eTypeError, "QRect must be an array with 4 elements"); + return QRect(); + } +@@ -362,7 +362,7 @@ + return l; + } + inline static QRectF toVariant(VALUE value) { +- if( TYPE(value) != T_ARRAY || RARRAY(value)->len != 4 ) { ++ if( TYPE(value) != T_ARRAY || RARRAY_LEN(value) != 4 ) { + rb_raise(rb_eTypeError, "QRectF must be an array with 4 elements"); + return QRectF(); + } +@@ -447,7 +447,7 @@ + return QStringList(); + } + QStringList l; +- for(int i = 0; i < RARRAY(value)->len; i++) ++ for(int i = 0; i < RARRAY_LEN(value); i++) + l.append( RubyType<QString>::toVariant( rb_ary_entry(value, i) ) ); + return l; + } +@@ -469,7 +469,7 @@ + return QVariantList(); + } + QVariantList l; +- for(int i = 0; i < RARRAY(value)->len; i++) ++ for(int i = 0; i < RARRAY_LEN(value); i++) + l.append( RubyType<QVariant>::toVariant( rb_ary_entry(value, i) ) ); + return l; + } diff --git a/source/kde/kdebindings/kdebindings-ruby-env.h.diff b/source/kde/kdebindings/kdebindings-ruby-env.h.diff new file mode 100644 index 000000000..61f404c70 --- /dev/null +++ b/source/kde/kdebindings/kdebindings-ruby-env.h.diff @@ -0,0 +1,139 @@ +--- kdebindings-r1016551/ruby/krossruby/rubyextension.cpp.org 2009-08-26 07:50:12.000000000 -0600 ++++ kdebindings-r1016551/ruby/krossruby/rubyextension.cpp 2009-08-29 05:59:57.705834017 -0600 +@@ -278,7 +278,7 @@ + sendersignal = RubyType<QByteArray>::toVariant(argv[1]); + idx = 2; + if( argc <= idx ) { +- rb_raise(rb_eTypeError, ::QString("Expected at least %1 arguments.").arg(idx+1).toLatin1().constData()); ++ /*rb_raise(rb_eTypeError, ::QString("Expected at least %1 arguments.").arg(idx+1).toLatin1().constData());*/ + return Qfalse; + } + } break; +@@ -310,7 +310,7 @@ + */ + #if(!(RUBY_VERSION_MAJOR==1 && RUBY_VERSION_MINOR==8 && RUBY_VERSION_TEENY==4)) + else { +- rb_raise(rb_eTypeError, ::QString("The argument number %1 is invalid.").arg(idx).toLatin1().constData()); ++ /*rb_raise(rb_eTypeError, ::QString("The argument number %1 is invalid.").arg(idx).toLatin1().constData());*/ + return Qfalse; + } + #endif +--- kdebindings-r1016551/ruby/krossruby/rubyfunction.h.org 2009-08-26 07:50:12.000000000 -0600 ++++ kdebindings-r1016551/ruby/krossruby/rubyfunction.h 2009-08-29 06:27:56.393849016 -0600 +@@ -198,7 +198,7 @@ + //VALUE result = rb_funcall2(m_method, rb_intern("call"), argsize, args); + + //TODO optimize +- ruby_in_eval++; ++ /*ruby_in_eval++; + VALUE argarray = rb_ary_new2(3); + rb_ary_store(argarray, 0, m_method); //self + rb_ary_store(argarray, 1, INT2FIX(argsize)); +@@ -207,7 +207,7 @@ + ruby_in_eval--; + + // finally set the returnvalue +- m_tmpResult = RubyType<QVariant>::toVariant(result); ++ m_tmpResult = RubyType<QVariant>::toVariant(result);*/ + #ifdef KROSS_RUBY_FUNCTION_DEBUG + QObject* sender = QObject::sender(); + krossdebug( QString("RubyFunction::qt_metacall sender.objectName=%1 sender.className=%2 result=%3 variantresult=%4").arg(sender->objectName()).arg(sender->metaObject()->className()).arg(STR2CSTR(rb_inspect(result))).arg(m_tmpResult.toString()) ); +--- kdebindings-r1016551/ruby/krossruby/rubyobject.cpp.org 2009-08-28 04:05:33.356632000 -0600 ++++ kdebindings-r1016551/ruby/krossruby/rubyobject.cpp 2009-08-29 05:22:50.886344151 -0600 +@@ -52,7 +52,7 @@ + } + } + +- ruby_nerrs++; ++ /*ruby_nerrs++;*/ + /* + VALUE rubyscriptvalue = rb_funcall(self, rb_intern("const_get"), 1, ID2SYM(rb_intern("RUBYSCRIPTOBJ"))); + RubyScript* rubyscript; +--- kdebindings-r1016551/ruby/krossruby/rubyscript.cpp.org 2009-08-28 04:05:33.360633000 -0600 ++++ kdebindings-r1016551/ruby/krossruby/rubyscript.cpp 2009-08-29 05:21:52.226333617 -0600 +@@ -65,7 +65,7 @@ + } + } + +- ruby_nerrs++; ++/* ruby_nerrs++;*/ + + VALUE rubyscriptvalue = rb_funcall(self, rb_intern("const_get"), 1, ID2SYM(rb_intern("RUBYSCRIPTOBJ"))); + RubyScript* rubyscript; +@@ -173,11 +173,11 @@ + // needed to prevent infinitive loops ifour scripting call uses e.g. callFunction + m_hasBeenSuccessFullyExecuted = true; + +- const int critical = rb_thread_critical; +- rb_thread_critical = Qtrue; ++ /*const int critical = rb_thread_critical;*/ ++ /*rb_thread_critical = Qtrue; + + ruby_nerrs = 0; +- ruby_errinfo = Qnil; ++ ruby_errinfo = Qnil;*/ + + VALUE args = rb_ary_new2(3); + rb_ary_store(args, 0, m_script); //self +@@ -192,24 +192,24 @@ + } + */ + +- ruby_in_eval++; ++ /*ruby_in_eval++;*/ + VALUE result = rb_rescue2((VALUE(*)(...))callExecute, args, (VALUE(*)(...))callExecuteException, m_script, rb_eException, 0); +- ruby_in_eval--; ++ /*ruby_in_eval--;*/ + +- if (ruby_nerrs != 0) { ++ /*if (ruby_nerrs != 0) { + //#ifdef KROSS_RUBY_SCRIPT_EXECUTE_DEBUG + krossdebug( QString("Compilation has failed. errorMessage=%1 errorTrace=\n%2\n").arg(q->errorMessage()).arg(q->errorTrace()) ); + //#endif + m_hasBeenSuccessFullyExecuted = false; + } else { + m_hasBeenSuccessFullyExecuted = true; +- } ++ }*/ + + #ifdef KROSS_RUBY_EXPLICIT_GC + rb_gc(); + #endif + +- rb_thread_critical = critical; ++ /*rb_thread_critical = critical;*/ + return result; + } + +@@ -371,9 +371,9 @@ + krossdebug( QString("RubyScript::callFunction() name=%1").arg(name) ); + #endif + +- const int critical = rb_thread_critical; ++ /*const int critical = rb_thread_critical; + rb_thread_critical = Qtrue; +- ruby_in_eval++; ++ ruby_in_eval++;*/ + //ruby_current_node + + if( ! d->m_hasBeenSuccessFullyExecuted ) { +@@ -383,7 +383,7 @@ + #ifdef KROSS_RUBY_SCRIPT_CALLFUNCTION_DEBUG + krossdebug("RubyScript::callFunction failed"); + #endif +- setError( QString("Failed to call function \"%1\": %2").arg(name).arg(STR2CSTR( rb_obj_as_string(ruby_errinfo) )) ); // TODO: get the error ++ /*setError( QString("Failed to call function \"%1\": %2").arg(name).arg(STR2CSTR( rb_obj_as_string(ruby_errinfo) )) ); // TODO: get the error*/ + } + else { + //VALUE self = rb_eval_string("self"); +@@ -413,8 +413,8 @@ + // rb_gc(); // This one is plainly wrong, since there is a good deal of chance that it will delete the content of result before it is used + #endif + +- ruby_in_eval--; +- rb_thread_critical = critical; ++ /*ruby_in_eval--; ++ rb_thread_critical = critical;*/ + + return result; + } diff --git a/source/kde/kdebindings/kdebindings-rubyconfig.h.diff b/source/kde/kdebindings/kdebindings-rubyconfig.h.diff new file mode 100644 index 000000000..aa8b426d3 --- /dev/null +++ b/source/kde/kdebindings/kdebindings-rubyconfig.h.diff @@ -0,0 +1,20 @@ +--- kdebindings-4.3.0/ruby/krossruby/rubyconfig.h.org 2009-01-16 08:04:29.000000000 -0700 ++++ kdebindings-4.3.0/ruby/krossruby/rubyconfig.h 2009-08-08 23:14:59.917148261 -0600 +@@ -21,12 +21,12 @@ + #define KROSS_RUBY_CONFIG_H + + #include <ruby.h> +-#include <env.h> +-#include <rubysig.h> +-#include <node.h> +-#include <version.h> ++//#include <env.h> ++#include <ruby/backward/rubysig.h> ++#include <ruby/node.h> ++#include <ruby/version.h> + +-#include <st.h> ++#include <ruby/st.h> + //#include <typeinfo> + + #include <kross/core/krossconfig.h> diff --git a/source/kde/kdebindings/kdebindings.SlackBuild b/source/kde/kdebindings/kdebindings.SlackBuild index a31407b91..21df45de4 100755 --- a/source/kde/kdebindings/kdebindings.SlackBuild +++ b/source/kde/kdebindings/kdebindings.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -46,6 +46,11 @@ cd $TMP echo "Building kdebindings-$VERSION..." tar xvf $CWD/../src/kdebindings-$VERSION.tar.?z* || exit 1 cd kdebindings-$VERSION + +zcat $CWD/kdebindings-len-ptr-rfloat.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/kdebindings-ruby-env.h.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/kdebindings-rubyconfig.h.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -58,6 +63,7 @@ mkdir -p build cd build #-DCMAKE_BACKWARDS_COMPATIBILITY:STRING="2.2" \ cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ @@ -65,17 +71,15 @@ cd build -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DENABLE_PHONON:BOOL=OFF \ - -DENABLE_PHONON_SMOKE:BOOL=OFF \ -DENABLE_QYOTO:BOOL=OFF \ -DENABLE_QSCINTILLA_SHARP:BOOL=OFF \ -DENABLE_KIMONO:BOOL=OFF \ -DBUILD_csharp:BOOL=OFF \ - -DENABLE_KHTML:BOOL=OFF \ - -DENABLE_PHONON_RUBY:BOOL=OFF \ .. - # kdebindings has (in the past, on several occasions) barfed on multijobs, so no $NUMJOBS here: - make || exit 1 + # kdebindings has (in the past, on several occasions) barfed on multijobs, + # so no $NUMJOBS here. We run make twice because the first time is not + # 100% successful either...: + make || make || exit 1 make install DESTDIR=$PKG || exit 1 cd - diff --git a/source/kde/kdebase-runtime/local.options b/source/kde/kdebindings/local.options index aae3c765c..aae3c765c 100644 --- a/source/kde/kdebase-runtime/local.options +++ b/source/kde/kdebindings/local.options diff --git a/source/kde/kdebindings/slack-desc b/source/kde/kdebindings/slack-desc index 753edde91..e927c76fe 100644 --- a/source/kde/kdebindings/slack-desc +++ b/source/kde/kdebindings/slack-desc @@ -6,14 +6,14 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdebindings: kdebindings +kdebindings: kdebindings (KDE language bindings) kdebindings: kdebindings: KDE and most KDE applications are implemented using the C++ kdebindings: programming language, but that doesn't mean you don't have a choice. kdebindings: This package contains a number of bindings to other languages, kdebindings: including scripting languages and other systems' programming -kdebindings: languages. -kdebindings: +kdebindings: languages, allowing them to be used to create applications for the +kdebindings: KDE Platform. kdebindings: kdebindings: kdebindings: diff --git a/source/kde/kdeedu/kdeedu.SlackBuild b/source/kde/kdeedu/kdeedu.SlackBuild index 100212971..1cdb0336a 100755 --- a/source/kde/kdeedu/kdeedu.SlackBuild +++ b/source/kde/kdeedu/kdeedu.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdeedu/slack-desc b/source/kde/kdeedu/slack-desc index 10b045bce..b97fdd759 100644 --- a/source/kde/kdeedu/slack-desc +++ b/source/kde/kdeedu/slack-desc @@ -6,9 +6,9 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdeedu: kdeedu +kdeedu: kdeedu (Educational applications) kdeedu: -kdeedu: Educational applications for KDE. +kdeedu: Educational applications for the KDE Software Compilation. kdeedu: kdeedu: kdeedu: diff --git a/source/kde/kdegames/kdegames.SlackBuild b/source/kde/kdegames/kdegames.SlackBuild index 71ed91ce7..6532e1e7b 100755 --- a/source/kde/kdegames/kdegames.SlackBuild +++ b/source/kde/kdegames/kdegames.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdegames/slack-desc b/source/kde/kdegames/slack-desc index 48ef0ea6b..c821c7fa7 100644 --- a/source/kde/kdegames/slack-desc +++ b/source/kde/kdegames/slack-desc @@ -6,9 +6,9 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdegames: kdegames +kdegames: kdegames (KDE games) kdegames: -kdegames: A collection of games for the K Desktop Environment. +kdegames: A collection of games for the KDE Software Compilation. kdegames: kdegames: kdegames: diff --git a/source/kde/kdegraphics/kdegraphics.SlackBuild b/source/kde/kdegraphics/kdegraphics.SlackBuild index 50447b3f6..a33ffbccb 100755 --- a/source/kde/kdegraphics/kdegraphics.SlackBuild +++ b/source/kde/kdegraphics/kdegraphics.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -47,6 +47,8 @@ echo "Building kdegraphics-$VERSION..." tar xvf $CWD/../src/kdegraphics-$VERSION.tar.?z* || exit 1 cd kdegraphics-$VERSION +zcat $CWD/kdegraphics.gwenview.jpeg8.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -57,6 +59,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdegraphics/kdegraphics.gwenview.jpeg8.diff b/source/kde/kdegraphics/kdegraphics.gwenview.jpeg8.diff new file mode 100644 index 000000000..8d509f4df --- /dev/null +++ b/source/kde/kdegraphics/kdegraphics.gwenview.jpeg8.diff @@ -0,0 +1,13 @@ +--- ./gwenview/lib/jpegcontent.cpp.orig 2009-05-14 12:26:10.000000000 -0500 ++++ ./gwenview/lib/jpegcontent.cpp 2010-05-17 21:08:10.000000000 -0500 +@@ -455,9 +455,8 @@ + + // Init transformation + jpeg_transform_info transformoption; ++ memset(&transformoption, 0, sizeof(jpeg_transform_info)); + transformoption.transform = findJxform(d->mTransformMatrix); +- transformoption.force_grayscale = false; +- transformoption.trim = false; + jtransform_request_workspace(&srcinfo, &transformoption); + + /* Read source file as DCT coefficients */ diff --git a/source/kde/kdegraphics/local.options b/source/kde/kdegraphics/local.options new file mode 100644 index 000000000..aae3c765c --- /dev/null +++ b/source/kde/kdegraphics/local.options @@ -0,0 +1 @@ +BUILD=2 diff --git a/source/kde/kdegraphics/slack-desc b/source/kde/kdegraphics/slack-desc index a06b949e3..7184942e0 100644 --- a/source/kde/kdegraphics/slack-desc +++ b/source/kde/kdegraphics/slack-desc @@ -8,9 +8,9 @@ |-----handy-ruler------------------------------------------------------| kdegraphics: kdegraphics (KDE graphics programs) kdegraphics: -kdegraphics: Graphics programs for KDE, including gwenview, kcolorchooser, -kdegraphics: kbackgroundsnapshot, kolourpaint, kruler, ksnapshot, okular, and -kdegraphics: xf86gammacfg. +kdegraphics: Graphics programs for the KDE Software Compilation, including +kdegraphics: gwenview, kcolorchooser, kbackgroundsnapshot, kolourpaint, kruler, +kdegraphics: ksnapshot, okular, and xf86gammacfg. kdegraphics: kdegraphics: kdegraphics: diff --git a/source/kde/kdelibs/fixPopupForPlasmaboard.diff b/source/kde/kdelibs/fixPopupForPlasmaboard.diff deleted file mode 100644 index cf6dec7ca..000000000 --- a/source/kde/kdelibs/fixPopupForPlasmaboard.diff +++ /dev/null @@ -1,43 +0,0 @@ -Index: kdelibs/plasma/popupapplet.cpp -=================================================================== ---- kdelibs/plasma/popupapplet.cpp (Revision 976120) -+++ kdelibs/plasma/popupapplet.cpp (Arbeitskopie) -@@ -275,11 +275,7 @@ - //stuff out of your Dialog (extenders). Monitor WindowDeactivate events so we can - //emulate the same kind of behavior as Qt::Popup (close when you click somewhere - //else. -- dialog->setWindowFlags(Qt::FramelessWindowHint | Qt::WindowStaysOnTopHint); -- updateDialogFlags(); -- KWindowSystem::setState(dialog->winId(), NET::SkipTaskbar | NET::SkipPager); -- dialog->installEventFilter(q); -- -+ - q->setMinimumSize(QSize(0, 0)); - if (gWidget) { - Corona *corona = qobject_cast<Corona *>(gWidget->scene()); -@@ -289,14 +285,25 @@ - corona->addOffscreenWidget(gWidget); - dialog->setGraphicsWidget(gWidget); - } -+ -+ dialog->setWindowFlags(Qt::FramelessWindowHint | Qt::WindowStaysOnTopHint | (gWidget->windowFlags() & Qt::X11BypassWindowManagerHint)); - } else if (qWidget) { - QVBoxLayout *l_layout = new QVBoxLayout(dialog); - l_layout->setSpacing(0); - l_layout->setMargin(0); - l_layout->addWidget(qWidget); - dialog->adjustSize(); -+ -+ dialog->setWindowFlags(Qt::FramelessWindowHint | Qt::WindowStaysOnTopHint | (qWidget->windowFlags() & Qt::X11BypassWindowManagerHint)); - } -+ else { -+ dialog->setWindowFlags(Qt::FramelessWindowHint | Qt::WindowStaysOnTopHint); -+ } -+ updateDialogFlags(); -+ KWindowSystem::setState(dialog->winId(), NET::SkipTaskbar | NET::SkipPager); -+ dialog->installEventFilter(q); - -+ - QObject::connect(dialog, SIGNAL(dialogResized()), q, SLOT(dialogSizeChanged())); - QObject::connect(dialog, SIGNAL(dialogVisible(bool)), q, SLOT(dialogStatusChanged(bool))); - } diff --git a/source/kde/kdelibs/kdelibs.SlackBuild b/source/kde/kdelibs/kdelibs.SlackBuild index 656ee6678..aa6ddde09 100755 --- a/source/kde/kdelibs/kdelibs.SlackBuild +++ b/source/kde/kdelibs/kdelibs.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -47,11 +47,6 @@ echo "Building kdelibs-$VERSION..." tar xvf $CWD/../src/kdelibs-$VERSION.tar.?z* || exit 1 cd kdelibs-$VERSION -zcat $CWD/fixPopupForPlasmaboard.diff.gz | patch -p1 --verbose || exit 1 -( cd kdesu - zcat $CWD/kdesu-allow_NOPASS_in_suauth.patch.gz | patch -p1 --verbose || exit 1 -) || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -62,6 +57,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ @@ -75,6 +71,9 @@ cd build make install DESTDIR=$PKG || exit 1 cd - +# Move the polkit dbus configuration files to the proper place: +mv $PKG/etc/kde/dbus-1 $PKG/etc/ + if [ -d $PKG/usr/man ]; then gzip -9 $PKG/usr/man/man?/* fi diff --git a/source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch b/source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch index 8d2168c3a..64b4d5af2 100644 --- a/source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch +++ b/source/kde/kdelibs/kdesu-allow_NOPASS_in_suauth.patch @@ -1,94 +1,61 @@ diff -Naur kdesu/stub.cpp kdesu.new/stub.cpp --- kdesu/stub.cpp 2008-05-21 08:08:55.000000000 -0300 -+++ kdesu.new/stub.cpp 2009-08-06 04:06:43.000000000 -0300 -@@ -111,7 +111,7 @@ - if (line.isNull()) - return -1; - -- if (line == "kdesu_stub") -+ if ((line == "kdesu_stub")||(line == "Password authentication bypassed.")) - { - // This makes parsing a lot easier. ++++ kdesu.new/stub.cpp 2009-10-13 01:32:10.000000000 -0300 +@@ -105,6 +105,7 @@ + int StubProcess::ConverseStub(int check) + { + QByteArray line, tmp; ++ + while (1) + { + line = readLine(); +@@ -117,7 +118,17 @@ enableLocalEcho(false); + if (check) writeLine("stop"); + else writeLine("ok"); +- } else if (line == "display") { ++ break; ++ } ++ } ++ ++ while (1) ++ { ++ line = readLine(); ++ if (line.isNull()) ++ return -1; ++ ++ if (line == "display") { + writeLine(display()); + } else if (line == "display_auth") { + #ifdef Q_WS_X11 diff -Naur kdesu/su.cpp kdesu.new/su.cpp --- kdesu/su.cpp 2008-05-21 08:08:55.000000000 -0300 -+++ kdesu.new/su.cpp 2009-08-06 04:10:55.000000000 -0300 -@@ -163,7 +163,7 @@ - } - // kDebug(900) << k_lineinfo << "Done StubProcess::exec()"; - -- SuErrors ret = (SuErrors) ConverseSU(password); -+ SuErrors ret = (SuErrors) ConverseSU(password,check); - // kDebug(900) << k_lineinfo << "Conversation returned " << ret; - - if (ret == error) -@@ -172,6 +172,7 @@ - kError(900) << k_lineinfo << "Conversation with su failed\n"; - return ret; - } -+ - if (check == NeedPassword) - { - if (ret == killme) -@@ -235,10 +236,10 @@ - - /* - * Conversation with su: feed the password. --* Return values: -1 = error, 0 = ok, 1 = kill me, 2 not authorized -+* Return values: -1 = error, 0 = ok, 1 = kill me, 2 = not authorized - */ - --int SuProcess::ConverseSU(const char *password) -+int SuProcess::ConverseSU(const char *password, int check) - { - enum { WaitForPrompt, CheckStar, HandleStub } state = WaitForPrompt; - int colon; -@@ -265,6 +266,27 @@ - return ok; - } - -+ if (line == "Password authentication bypassed.") -+ { -+ if (check == 2) -+ { -+ unreadLine(line); -+ return ok; -+ } -+ else -+ { -+ if (checkPid(m_Pid)) -+ { -+ state=HandleStub; -+ } -+ else -+ { -+ return error; -+ } -+ } -+ break; -+ } -+ ++++ kdesu.new/su.cpp 2009-10-19 00:21:31.000000000 -0200 +@@ -258,13 +258,6 @@ + ////////////////////////////////////////////////////////////////////////// + case WaitForPrompt: + { +- // In case no password is needed. +- if (line == "kdesu_stub") +- { +- unreadLine(line); +- return ok; +- } +- while(waitMS(fd(),100)>0) { // There is more output available, so the previous line -@@ -293,7 +315,7 @@ +@@ -279,6 +272,13 @@ + kDebug(900) << k_lineinfo << "Read line <" << more << ">"; } - if ((colon == 1) && (line[j] == ':')) - { -- if (password == 0L) -+ if (password == 0L) - return killme; - if (!checkPid(m_Pid)) - { -diff -Naur kdesu/su.h kdesu.new/su.h ---- kdesu/su.h 2008-05-21 08:08:55.000000000 -0300 -+++ kdesu.new/su.h 2009-08-06 02:50:02.000000000 -0300 -@@ -62,7 +62,7 @@ - - private: - enum SuErrors { error=-1, ok=0, killme=1, notauthorized=2 } ; -- int ConverseSU(const char *password); -+ int ConverseSU(const char *password, int check=NoCheck); - protected: - virtual void virtual_hook( int id, void* data ); ++ // In case no password is needed. ++ if (line == "kdesu_stub") ++ { ++ unreadLine(line); ++ return ok; ++ } ++ + // Match "Password: " with the regex ^[^:]+:[\w]*$. + const uint len = line.length(); + for (i=0,j=0,colon=0; i<len; i++) diff --git a/source/kde/kdelibs/local.options b/source/kde/kdelibs/local.options deleted file mode 100644 index a837340db..000000000 --- a/source/kde/kdelibs/local.options +++ /dev/null @@ -1 +0,0 @@ -BUILD=3 diff --git a/source/kde/kdelibs/slack-desc b/source/kde/kdelibs/slack-desc index a07f7efff..a89ea3c8a 100644 --- a/source/kde/kdelibs/slack-desc +++ b/source/kde/kdelibs/slack-desc @@ -8,7 +8,7 @@ |-----handy-ruler------------------------------------------------------| kdelibs: kdelibs (KDE libraries) kdelibs: -kdelibs: System libraries and other resources required by KDE. +kdelibs: System libraries and other resources required for the KDE Platform. kdelibs: kdelibs: kdelibs: diff --git a/source/kde/kdemultimedia/kdemultimedia.SlackBuild b/source/kde/kdemultimedia/kdemultimedia.SlackBuild index 6878e632c..9a7826ad1 100755 --- a/source/kde/kdemultimedia/kdemultimedia.SlackBuild +++ b/source/kde/kdemultimedia/kdemultimedia.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdemultimedia/slack-desc b/source/kde/kdemultimedia/slack-desc index f8c47eadf..2cc67153a 100644 --- a/source/kde/kdemultimedia/slack-desc +++ b/source/kde/kdemultimedia/slack-desc @@ -6,9 +6,9 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdemultimedia: kdemultimedia +kdemultimedia: kdemultimedia (KDE multimedia applications) kdemultimedia: -kdemultimedia: Multimedia applications for KDE including: +kdemultimedia: Multimedia applications for the KDE Software Compilation, including: kdemultimedia: * noatun: a multimedia player for sound and movies kdemultimedia: * kmix: the audio mixer as a standalone program and Kicker applet kdemultimedia: * kscd: A CD player with an interface to the internet CDDB database diff --git a/source/kde/kdenetwork/kdenetwork.SlackBuild b/source/kde/kdenetwork/kdenetwork.SlackBuild index 6939ad4c7..9ff64fb9e 100755 --- a/source/kde/kdenetwork/kdenetwork.SlackBuild +++ b/source/kde/kdenetwork/kdenetwork.SlackBuild @@ -47,7 +47,8 @@ echo "Building kdenetwork-$VERSION..." tar xvf $CWD/../src/kdenetwork-$VERSION.tar.?z* || exit 1 cd kdenetwork-$VERSION -zcat $CWD/kopete-r986796.diff.gz | patch -p4 --verbose || exit 1 +# CVE-2010-1000 and CVE-2010-1511: +zcat $CWD/kget.kde44.CVE-2010-1000-1511.diff.gz | patch -p0 --verbose || exit 1 chown -R root:root . find . \ @@ -59,6 +60,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ @@ -66,6 +68,7 @@ cd build -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + -DWITH_irc=ON \ .. make $NUMJOBS || exit 1 make install DESTDIR=$PKG || exit 1 diff --git a/source/kde/kdenetwork/kget.kde44.CVE-2010-1000-1511.diff b/source/kde/kdenetwork/kget.kde44.CVE-2010-1000-1511.diff new file mode 100644 index 000000000..fdabbff0d --- /dev/null +++ b/source/kde/kdenetwork/kget.kde44.CVE-2010-1000-1511.diff @@ -0,0 +1,212 @@ +Index: kget/transfer-plugins/metalink/metalink.cpp +=================================================================== +--- kget/transfer-plugins/metalink/metalink.cpp (revision 1124973) ++++ kget/transfer-plugins/metalink/metalink.cpp (revision 1124974) +@@ -99,6 +99,7 @@ + void Metalink::metalinkInit(const KUrl &src, const QByteArray &data) + { + kDebug(5001); ++ + bool justDownloaded = !m_localMetalinkLocation.isValid(); + if (!src.isEmpty()) + { +@@ -121,7 +122,9 @@ + //error + if (!m_metalink.isValid()) + { +- kDebug(5001) << "Unknown error when trying to load the .metalink-file"; ++ kError(5001) << "Unknown error when trying to load the .metalink-file. Metalink is not valid."; ++ setStatus(Job::Aborted); ++ setTransferChange(Tc_Status, true); + return; + } + +@@ -202,7 +205,7 @@ + if (!m_dataSourceFactory.size()) + { + KMessageBox::error(0, i18n("Download failed, no working URLs were found."), i18n("Error")); +- setStatus(Job::Aborted, i18n("An error occurred...."), SmallIcon("document-preview")); ++ setStatus(Job::Aborted); + setTransferChange(Tc_Status, true); + return; + } +@@ -227,16 +230,29 @@ + ui.treeView->hideColumn(FileItem::SignatureVerified); + dialog->setMainWidget(widget); + dialog->setCaption(i18n("File Selection")); +- dialog->setButtons(KDialog::Ok); +- connect(dialog, SIGNAL(finished()), this, SLOT(filesSelected())); ++ dialog->setButtons(KDialog::Ok | KDialog::Cancel); ++ connect(dialog, SIGNAL(finished(int)), this, SLOT(fileDlgFinished(int))); + + dialog->show(); + } + } + +-void Metalink::filesSelected() ++void Metalink::fileDlgFinished(int result) + { ++ //BEGIN HACK if the dialog was not accepted untick every file, so that the download does not start ++ //generally setStatus should do the job as well, but does not as it appears ++ if (result != QDialog::Accepted) { ++ for (int row = 0; row < fileModel()->rowCount(); ++row) { ++ QModelIndex index = fileModel()->index(row, FileItem::File); ++ if (index.isValid()) { ++ fileModel()->setData(index, Qt::Unchecked, Qt::CheckStateRole); ++ } ++ } ++ } ++ //END ++ + QModelIndexList files = fileModel()->fileIndexes(FileItem::File); ++ int numFilesSelected = 0; + foreach (const QModelIndex &index, files) + { + const KUrl dest = fileModel()->getUrl(index); +@@ -244,6 +260,9 @@ + if (m_dataSourceFactory.contains(dest)) + { + m_dataSourceFactory[dest]->setDoDownload(doDownload); ++ if (doDownload) { ++ ++numFilesSelected; ++ } + } + } + +@@ -252,9 +271,15 @@ + processedSizeChanged(); + speedChanged(); + ++ //no files selected to download or dialog rejected, stop the download ++ if (!numFilesSelected || (result != QDialog::Accepted)) { ++ setStatus(Job::Stopped);//FIXME ++ setTransferChange(Tc_Status, true); ++ return; ++ } ++ + //some files may be set to download, so start them as long as the transfer is not stopped +- if (status() != Job::Stopped) +- { ++ if (status() != Job::Stopped) { + startMetalink(); + } + } +Index: kget/transfer-plugins/metalink/metalink.h +=================================================================== +--- kget/transfer-plugins/metalink/metalink.h (revision 1124973) ++++ kget/transfer-plugins/metalink/metalink.h (revision 1124974) +@@ -81,7 +81,7 @@ + + private Q_SLOTS: + void metalinkInit(const KUrl &url = KUrl(), const QByteArray &data = QByteArray()); +- void filesSelected(); ++ void fileDlgFinished(int result); + void totalSizeChanged(KIO::filesize_t size); + void processedSizeChanged(); + void speedChanged(); +Index: kget/ui/metalinkcreator/metalinker.h +=================================================================== +--- kget/ui/metalinkcreator/metalinker.h (revision 1124973) ++++ kget/ui/metalinkcreator/metalinker.h (revision 1124974) +@@ -259,6 +259,14 @@ + KIO::filesize_t size; + CommonData data; + Resources resources; ++ ++ private: ++ /** ++ * Controlls if the name attribute is valid, i.e. it is not empty and ++ * does not contain any directory traversal directives or information, ++ * as described in the Metalink 4.0 specification 4.1.2.1. ++ */ ++ bool isValidNameAttribute() const; + }; + + class Files +Index: kget/ui/metalinkcreator/metalinker.cpp +=================================================================== +--- kget/ui/metalinkcreator/metalinker.cpp (revision 1124973) ++++ kget/ui/metalinkcreator/metalinker.cpp (revision 1124974) +@@ -528,14 +528,14 @@ + + bool KGetMetalink::File::isValid() const + { +- return !name.isEmpty() && resources.isValid(); ++ return isValidNameAttribute() && resources.isValid(); + } + + void KGetMetalink::File::load(const QDomElement &e) + { + data.load(e); + +- name = e.attribute("name"); ++ name = QUrl::fromPercentEncoding(e.attribute("name").toAscii()); + size = e.firstChildElement("size").text().toULongLong(); + + verification.load(e); +@@ -575,6 +575,22 @@ + resources.clear(); + } + ++ ++bool KGetMetalink::File::isValidNameAttribute() const ++{ ++ if (name.isEmpty()) { ++ kError(5001) << "Name attribute of Metalink::File is empty."; ++ return false; ++ } ++ ++ if (name.contains(QRegExp("$(\\.\\.?)?/")) || name.contains("/../") || name.endsWith("/..")) { ++ kError(5001) << "Name attribute of Metalink::File contains directory traversal directives:" << name; ++ return false; ++ } ++ ++ return true; ++} ++ + #ifdef HAVE_NEPOMUK + QHash<QUrl, Nepomuk::Variant> KGetMetalink::File::properties() const + { +@@ -584,13 +600,28 @@ + + bool KGetMetalink::Files::isValid() const + { +- bool isValid = !files.empty(); +- foreach (const File &file, files) +- { +- isValid &= file.isValid(); ++ if (files.isEmpty()) { ++ return false; + } + +- return isValid; ++ QStringList fileNames; ++ foreach (const File &file, files) { ++ fileNames << file.name; ++ if (!file.isValid()) { ++ return false; ++ } ++ } ++ ++ //The value of name must be unique for each file ++ while (!fileNames.isEmpty()) { ++ const QString fileName = fileNames.takeFirst(); ++ if (fileNames.contains(fileName)) { ++ kError(5001) << "Metalink::File name" << fileName << "exists multiple times."; ++ return false; ++ } ++ } ++ ++ return true; + } + + void KGetMetalink::Files::load(const QDomElement &e) +@@ -751,7 +782,7 @@ + + for (QDomElement elem = filesElem.firstChildElement("file"); !elem.isNull(); elem = elem.nextSiblingElement("file")) { + File file; +- file.name = elem.attribute("name"); ++ file.name = QUrl::fromPercentEncoding(elem.attribute("name").toAscii()); + file.size = elem.firstChildElement("size").text().toULongLong(); + + file.data = parseCommonData(elem); diff --git a/source/kde/kdenetwork/kopete-r986796.diff b/source/kde/kdenetwork/kopete-r986796.diff deleted file mode 100644 index a251b3288..000000000 --- a/source/kde/kdenetwork/kopete-r986796.diff +++ /dev/null @@ -1,396 +0,0 @@ -Index: branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/libkyahoo/logintask.h -=================================================================== ---- branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/libkyahoo/logintask.h (revision 986795) -+++ branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/libkyahoo/logintask.h (revision 986796) -@@ -26,7 +26,13 @@ - - class QString; - class YMSGTransfer; -+class KJob; - -+namespace KIO -+{ -+ class Job; -+} -+ - /** - @author Duncan Mac-Vicar - */ -@@ -58,6 +64,15 @@ - void sendAuthResp_pre_0x0b(const QString &sn, const QString &seed); - void handleAuthResp(YMSGTransfer *transfer); - void parseCookies( YMSGTransfer *transfer ); -+ void sendAuthSixteenStage1(const QString& sn, const QString& seed); -+ void sendAuthSixteenStage2(const QString& token); -+ void sendAuthSixteenStage3(const QString& cryptString); -+protected Q_SLOTS: -+ void handleAuthSixteenStage1Data(KIO::Job*, const QByteArray& data); -+ void handleAuthSixteenStage1Result(KJob*); -+ void handleAuthSixteenStage2Data(KIO::Job*, const QByteArray& data); -+ void handleAuthSixteenStage2Result(KJob*); -+ - signals: - void haveSessionID( uint ); - void haveCookies(); -@@ -71,6 +86,10 @@ - QString m_cCookie; - QString m_loginCookie; - QString m_verificationWord; -+ QString m_stage1Data; -+ QString m_stage2Data; -+ QString m_challengeString; -+ uint m_sessionID; - }; - - #endif -Index: branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/libkyahoo/logintask.cpp -=================================================================== ---- branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/libkyahoo/logintask.cpp (revision 986795) -+++ branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/libkyahoo/logintask.cpp (revision 986796) -@@ -3,10 +3,10 @@ - Handles logging into to the Yahoo service - - Copyright (c) 2004 Duncan Mac-Vicar P. <duncan@kde.org> -- - Copyright (c) 2005-2006 André Duffeck <duffeck@kde.org> -+ Copyright 2009 Matt Rogers <mattr@kde.org> - -- Kopete (c) 2002-2006 by the Kopete developers <kopete-devel@kde.org> -+ Kopete (c) 2002-2009 by the Kopete developers <kopete-devel@kde.org> - - ************************************************************************* - * * -@@ -28,6 +28,10 @@ - #include <qstring.h> - #include <kdebug.h> - #include <stdlib.h> -+ -+#include <QCryptographicHash> -+#include <KDE/KJob> -+#include <KDE/KIO/Job> - extern "C" - { - #include "libyahoo.h" -@@ -177,52 +181,197 @@ - - QString sn = t->firstParam( 1 ); - QString seed = t->firstParam( 94 ); -+ m_challengeString = seed; - QString version_s = t->firstParam( 13 ); -- uint sessionID = t->id(); -+ m_sessionID = t->id(); - int version = version_s.toInt(); - - switch (version) - { - case 0: -- kDebug(YAHOO_RAW_DEBUG) << " Version pre 0x0b "<< version_s; -- break; -+ case 1: -+ case 2: -+ kDebug(YAHOO_RAW_DEBUG) << "Using version 16 authorization" << endl; -+ sendAuthSixteenStage1(sn, seed); -+ break; - default: -- kDebug(YAHOO_RAW_DEBUG) << " Version 0x0b "<< version_s; -- sendAuthResp_0x0b(sn, seed, sessionID); -+ kWarning(YAHOO_RAW_DEBUG) << "Unknown authentication method used!" -+ << "Attempting current authentication anyways"; -+ sendAuthSixteenStage1(sn, seed); - break; - } - mState = SentAuthResp; - -- emit haveSessionID( sessionID ); -+ emit haveSessionID( m_sessionID ); - } - --void LoginTask::sendAuthResp_0x0b(const QString &sn, const QString &seed, uint sessionID) -+void LoginTask::sendAuthSixteenStage1(const QString& sn, const QString& seed) - { -- kDebug(YAHOO_RAW_DEBUG) << " with seed " << seed; -- char *resp_6 = (char *) malloc(100); -- char *resp_96 = (char *) malloc(100); -- authresp_0x0b(seed.toLatin1(), sn.toLatin1(), (client()->password()).toLatin1(), resp_6, resp_96); -- kDebug(YAHOO_RAW_DEBUG) << "resp_6: " << resp_6 << " resp_69: " << resp_96; -+ const QString YahooTokenUrl = "https://login.yahoo.com/config/pwtoken_get?src=ymsgr&ts=&login=%1&passwd=%2&chal=%3"; -+ kDebug(YAHOO_RAW_DEBUG) << "seed:" << seed; -+ m_stage1Data.clear(); -+ /* construct a URL from the seed and request tokens */ -+ QByteArray encodedUrl; -+ QString fullUrl = YahooTokenUrl.arg(sn, client()->password(), seed); -+ KUrl tokenUrl(fullUrl); -+ KIO::Job* job = KIO::get(tokenUrl, KIO::Reload, KIO::HideProgressInfo); -+ connect(job, SIGNAL(data(KIO::Job*, const QByteArray&)), -+ this, SLOT(handleAuthSixteenStage1Data(KIO::Job*, const QByteArray&))); -+ connect(job, SIGNAL(result(KJob*)), -+ this, SLOT(handleAuthSixteenStage1Result(KJob*))); -+} -+ -+void LoginTask::handleAuthSixteenStage1Data(KIO::Job* job, const QByteArray& data) -+{ -+ kDebug(YAHOO_RAW_DEBUG) << "data:" << data; -+ m_stage1Data.append(data); -+} -+ -+void LoginTask::handleAuthSixteenStage1Result(KJob* job) -+{ -+ int responseNumber = -1; -+ QString token; -+ int error = job->error(); -+ kDebug(YAHOO_RAW_DEBUG) << "error:" << error; -+ if (error == 0) -+ { -+ QStringList responses = m_stage1Data.split("\r\n"); -+ if (responses.count() >= 3) -+ { -+ responseNumber = responses[0].toInt(); -+ token = responses[1]; -+ token.remove("ymsgr="); -+ kDebug(YAHOO_RAW_DEBUG) << "response is:" << responseNumber; -+ kDebug(YAHOO_RAW_DEBUG) << "token is:" << token; -+ } -+ -+ if (responseNumber != 0) -+ { -+ switch(responseNumber) -+ { -+ case -1: -+ /* error in the received stream */ -+ emit loginResponse(Yahoo::LoginSock, QString()); -+ kDebug(YAHOO_RAW_DEBUG) << "unknown error logging in"; -+ break; -+ case 1212: -+ /* password incorrect */ -+ emit loginResponse(Yahoo::LoginPasswd, QString()); -+ kDebug(YAHOO_RAW_DEBUG) << "password incorrect"; -+ break; -+ case 1213: -+ /* security lock */ -+ emit loginResponse(Yahoo::LoginLock, QString()); -+ break; -+ case 1235: -+ /* username does not exist */ -+ emit loginResponse(Yahoo::LoginUname, QString()); -+ kDebug(YAHOO_RAW_DEBUG) << "user does not exist"; -+ break; -+ case 1214: -+ case 1236: -+ emit loginResponse(Yahoo::LoginVerify, QString()); -+ break; -+ case 100: /* username or password missing */ -+ /*FIXME handle this */ -+ break; -+ default: -+ /* FIXME unknown error. handle it! */ -+ break; -+ } -+ } -+ else -+ { -+ /* start stage 2 here */ -+ sendAuthSixteenStage2(token); -+ } -+ } -+} -+ -+void LoginTask::sendAuthSixteenStage2(const QString& token) -+{ -+ const QString YahooLoginUrl = "https://login.yahoo.com/config/pwtoken_login?src=ymsgr&ts=&token=%1"; -+ kDebug(YAHOO_RAW_DEBUG) << "token:" << token; -+ m_stage2Data.clear(); -+ QString fullUrl = YahooLoginUrl.arg(token); -+ KUrl loginUrl(fullUrl); -+ KIO::Job* job = KIO::get(loginUrl, KIO::Reload, KIO::HideProgressInfo); -+ connect(job, SIGNAL(data(KIO::Job*, const QByteArray&)), -+ this, SLOT(handleAuthSixteenStage2Data(KIO::Job*, const QByteArray&))); -+ connect(job, SIGNAL(result(KJob*)), -+ this, SLOT(handleAuthSixteenStage2Result(KJob*))); -+} -+ -+void LoginTask::handleAuthSixteenStage2Data(KIO::Job*, const QByteArray& data) -+{ -+ kDebug(YAHOO_RAW_DEBUG) << "data:" << data; -+ m_stage2Data.append(data); -+} -+ -+void LoginTask::handleAuthSixteenStage2Result(KJob* job) -+{ -+ QString crumb; -+ int responseNumber = -1; -+ int error = job->error(); -+ kDebug(YAHOO_RAW_DEBUG) << "error:" << error; -+ if (error == 0) -+ { -+ QStringList responses = m_stage2Data.split("\r\n"); -+ kDebug(YAHOO_RAW_DEBUG) << responses; -+ responseNumber = responses[0].toInt(); -+ if (responseNumber == 0) -+ { -+ crumb = responses[1]; -+ crumb.remove("crumb="); -+ m_yCookie = responses[2].remove(0,2); /* remove Y= */ -+ m_tCookie = responses[3].remove(0,2); /* remove T= */ -+ } -+ -+ if (responseNumber != 0) -+ { -+ switch(responseNumber) -+ { -+ case -1: -+ emit loginResponse(Yahoo::LoginSock, QString()); -+ break; -+ case 100: -+ emit loginResponse(Yahoo::LoginSock, QString()); -+ break; -+ default: /* try to login anyways */ -+ break; -+ } -+ } -+ else -+ { -+ QString cryptString = crumb; -+ cryptString.append(m_challengeString); -+ sendAuthSixteenStage3(cryptString); -+ } -+ } -+} -+ -+void LoginTask::sendAuthSixteenStage3(const QString& cryptString) -+{ -+ kDebug(YAHOO_RAW_DEBUG) << " with crypt string" << cryptString; -+ QByteArray cryptStringHash = QCryptographicHash::hash( cryptString.toAscii(), -+ QCryptographicHash::Md5 ); -+ cryptStringHash = cryptStringHash.toBase64(); -+ cryptStringHash = cryptStringHash.replace('+', '.'); -+ cryptStringHash = cryptStringHash.replace('/', '_'); -+ cryptStringHash = cryptStringHash.replace('=', '-'); -+ - YMSGTransfer *t = new YMSGTransfer(Yahoo::ServiceAuthResp, m_stateOnConnect); -- t->setId( sessionID ); -- t->setParam( 0 , sn.toLocal8Bit()); -- t->setParam( 2 , sn.toLocal8Bit()); -+ t->setId( m_sessionID ); -+ t->setParam( 1, client()->userId().toLocal8Bit()); -+ t->setParam( 0 , client()->userId().toLocal8Bit()); -+ t->setParam( 277, m_yCookie.toLocal8Bit() ); -+ t->setParam( 278, m_tCookie.toLocal8Bit() ); -+ t->setParam( 307, cryptStringHash ); -+ t->setParam( 244, 2097087 ); -+ t->setParam( 2 , client()->userId().toLocal8Bit()); - t->setParam( 2, 1 ); // Both parameter 2s wind up in the packet -- t->setParam( 6 , resp_6); -- t->setParam( 1, sn.toLocal8Bit()); -- t->setParam( 244, 2097087 ); - t->setParam( 135, YMSG_PROGRAM_VERSION_STRING ); -- t->setParam( 148, 480 ); -- t->setParam( 59 , "B\\tfckeert1kk1nl&b=2" ); // ??? - -- if( !m_verificationWord.isEmpty() ) -- { -- t->setParam( 227 , m_verificationWord.toLocal8Bit() ); -- m_verificationWord.clear(); -- } -- -- free(resp_6); -- free(resp_96); - send(t); - - } -Index: branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/yahooeditaccount.cpp -=================================================================== ---- branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/yahooeditaccount.cpp (revision 986795) -+++ branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/yahooeditaccount.cpp (revision 986796) -@@ -63,9 +63,9 @@ - mAutoConnect->setChecked(acct->excludeConnect()); - mPasswordWidget->load( &acct->password() ); - -- QString pagerServer = account()->configGroup()->readEntry("Server", "scs.msg.yahoo.com"); -+ QString pagerServer = account()->configGroup()->readEntry("Server", "scsa.msg.yahoo.com"); - int pagerPort = account()->configGroup()->readEntry("Port", 5050); -- if( pagerServer != "scs.msg.yahoo.com" || pagerPort != 5050 ) -+ if( pagerServer != "scsa.msg.yahoo.com" || pagerPort != 5050 ) - optionOverrideServer->setChecked( true ); - else - optionOverrideServer->setChecked( false ); -@@ -133,7 +133,7 @@ - } - else - { -- yahooAccount->setServer( "scs.msg.yahoo.com" ); -+ yahooAccount->setServer( "scsa.msg.yahoo.com" ); - yahooAccount->setPort( 5050 ); - } - -Index: branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/yahooaccount.cpp -=================================================================== ---- branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/yahooaccount.cpp (revision 986795) -+++ branches/KDE/4.2/kdenetwork/kopete/protocols/yahoo/yahooaccount.cpp (revision 986796) -@@ -539,7 +539,7 @@ - return; - } - -- QString server = configGroup()->readEntry( "Server", "scs.msg.yahoo.com" ); -+ QString server = configGroup()->readEntry( "Server", "scsa.msg.yahoo.com" ); - int port = configGroup()->readEntry( "Port", 5050 ); - - initConnectionSignals( MakeConnections ); -Index: branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/kopete-update_yahoo_server.upd -=================================================================== ---- branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/kopete-update_yahoo_server.upd (revision 0) -+++ branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/kopete-update_yahoo_server.upd (revision 986796) -@@ -0,0 +1,4 @@ -+Id=kopete-update-yahoo-server/r1 -+File=kopeterc -+Options=overwrite -+Script=kopete-update_yahoo_server.pl,perl -Index: branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/kopete-update_yahoo_server.pl -=================================================================== ---- branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/kopete-update_yahoo_server.pl (revision 0) -+++ branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/kopete-update_yahoo_server.pl (revision 986796) -@@ -0,0 +1,20 @@ -+#!/usr/bin/perl -+ -+# Rename the old Gaim style to Pidgin -+ -+my $inYahoo = 0; -+foreach (<>) { -+ $inYahoo = 1 if (/^\[Account_YahooProtocol_.*$/); -+ if ($inYahoo) { -+ if (/^Server\=(.*)/) { -+ my $oldServer = $1; -+ if ($oldServer =~ m/\.yahoo\.com$/) { -+ print "Server=scsa.msg.yahoo.com\n"; -+ $inYahoo = 0; -+ next; -+ } -+ } -+ } -+ -+ print $_; -+} - -Property changes on: branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/kopete-update_yahoo_server.pl -___________________________________________________________________ -Added: svn:executable - + * - -Index: branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/CMakeLists.txt -=================================================================== ---- branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/CMakeLists.txt (revision 986795) -+++ branches/KDE/4.2/kdenetwork/kopete/kopete/kconf_update/CMakeLists.txt (revision 986796) -@@ -4,10 +4,11 @@ - endif(NOT WIN32) - - --install( FILES kopete-pluginloader.upd kopete-nameTracking.upd kopete-initialstatus.upd DESTINATION ${KCONF_UPDATE_INSTALL_DIR}) -+install( FILES kopete-pluginloader.upd kopete-nameTracking.upd kopete-initialstatus.upd kopete-update_yahoo_server.upd DESTINATION ${KCONF_UPDATE_INSTALL_DIR}) - --install( PROGRAMS kopete-pluginloader.pl -- kopete-account-0.10.pl kopete-initialstatus.pl DESTINATION ${KCONF_UPDATE_INSTALL_DIR}) -+install( PROGRAMS kopete-pluginloader.pl kopete-update_yahoo_server.pl -+ kopete-account-0.10.pl kopete-initialstatus.pl -+ DESTINATION ${KCONF_UPDATE_INSTALL_DIR}) - - - #TODO kconf_program ? diff --git a/source/kde/kdenetwork/slack-desc b/source/kde/kdenetwork/slack-desc index 03fdd8fd9..90120dd93 100644 --- a/source/kde/kdenetwork/slack-desc +++ b/source/kde/kdenetwork/slack-desc @@ -6,9 +6,9 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdenetwork: kdenetwork (network utilities for KDE) +kdenetwork: kdenetwork (Network utilities for KDE) kdenetwork: -kdenetwork: Network related utilities for the K Desktop Environment. +kdenetwork: Network related utilities for the KDE Software Compilation. kdenetwork: kdenetwork: kdenetwork: diff --git a/source/kde/kdepim-runtime/doinst.sh b/source/kde/kdepim-runtime/doinst.sh new file mode 100644 index 000000000..e376b59af --- /dev/null +++ b/source/kde/kdepim-runtime/doinst.sh @@ -0,0 +1,5 @@ + +if [ -x /usr/bin/update-desktop-database ]; then + /usr/bin/update-desktop-database /usr/share/applications >/dev/null 2>&1 +fi + diff --git a/source/kde/kdepim-runtime/kdepim-runtime.SlackBuild b/source/kde/kdepim-runtime/kdepim-runtime.SlackBuild new file mode 100755 index 000000000..51b89c51f --- /dev/null +++ b/source/kde/kdepim-runtime/kdepim-runtime.SlackBuild @@ -0,0 +1,91 @@ +#!/bin/sh + +# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=kdepim-runtime +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM + +# Set the config option variables if they are not already set: +if [ -r ../KDE.options ]; then + . ../KDE.options +fi + +# The global options may be overridden here (if needed): +if [ -r ./local.options ]; then + . ./local.options +fi + +# Avoid a version number in .la files: +if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt +fi + +rm -rf $PKG +mkdir -p $PKG/usr +cd $TMP +echo "Building $PRGNAM-$VERSION..." +tar xvf $CWD/../src/$PRGNAM-$VERSION.tar.?z* || exit 1 +cd $PRGNAM-$VERSION + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_BUILD_TYPE=Release \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc/kde \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +if [ -d $PKG/usr/man ]; then + gzip -9 $PKG/usr/man/man?/* +fi + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a COPYING* MAINTAINERS README* $PKG/usr/doc/$PRGNAM-$VERSION + +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/kde/kdepim-runtime/slack-desc b/source/kde/kdepim-runtime/slack-desc new file mode 100644 index 000000000..cb0ac6e73 --- /dev/null +++ b/source/kde/kdepim-runtime/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +kdepim-runtime: kdepim-runtime (KDE Personal Information Management runtime) +kdepim-runtime: +kdepim-runtime: The KDE-PIM project aims to bring together those who wish to help +kdepim-runtime: design, implement, test, etc. anything that's to do with personal +kdepim-runtime: information management. +kdepim-runtime: +kdepim-runtime: This rather broad scope encompasses mail clients, addressbooks, +kdepim-runtime: usenet news, scheduling, and even sticky notes. +kdepim-runtime: +kdepim-runtime: +kdepim-runtime: diff --git a/source/kde/kdepim/kdepim-4.4.0-install-headers.patch b/source/kde/kdepim/kdepim-4.4.0-install-headers.patch new file mode 100644 index 000000000..378147093 --- /dev/null +++ b/source/kde/kdepim/kdepim-4.4.0-install-headers.patch @@ -0,0 +1,127 @@ +Index: libkleo/CMakeLists.txt +=================================================================== +--- libkleo/CMakeLists.txt (revision 1072331) ++++ libkleo/CMakeLists.txt (revision 1072330) +@@ -117,4 +117,60 @@ + set_target_properties(kleo PROPERTIES VERSION ${GENERIC_LIB_VERSION} SOVERSION ${GENERIC_LIB_SOVERSION} ) + install(TARGETS kleo ${INSTALL_TARGETS_DEFAULT_ARGS}) + ++install( FILES ++ kleo/cryptplug.h ++ kleo/cryptplugfactory.h ++ kleo/cryptplugwrapper.h ++ kleo/cryptplugwrapperlist.h ++ kleo/kleo_export.h ++ kleo/enum.h ++ kleo/oidmap.h ++ kleo/cryptobackend.h ++ kleo/cryptobackendfactory.h ++ kleo/cryptoconfig.h ++ kleo/dn.h ++ kleo/job.h ++ kleo/keylistjob.h ++ kleo/keygenerationjob.h ++ kleo/abstractimportjob.h ++ kleo/importjob.h ++ kleo/importfromkeyserverjob.h ++ kleo/exportjob.h ++ kleo/changeexpiryjob.h ++ kleo/changeownertrustjob.h ++ kleo/downloadjob.h ++ kleo/deletejob.h ++ kleo/encryptjob.h ++ kleo/decryptjob.h ++ kleo/signjob.h ++ kleo/specialjob.h ++ kleo/verifydetachedjob.h ++ kleo/verifyopaquejob.h ++ kleo/decryptverifyjob.h ++ kleo/signencryptjob.h ++ kleo/signkeyjob.h ++ kleo/adduseridjob.h ++ kleo/refreshkeysjob.h ++ kleo/multideletejob.h ++ kleo/hierarchicalkeylistjob.h ++ kleo/keyfilter.h ++ kleo/keyfiltermanager.h ++ DESTINATION ${INCLUDE_INSTALL_DIR}/kleo COMPONENT Devel) ++ ++install ( FILES ++ ui/kdhorizontalline.h ++ ui/messagebox.h ++ ui/progressbar.h ++ ui/progressdialog.h ++ ui/keylistview.h ++ ui/keyselectiondialog.h ++ ui/keyrequester.h ++ ui/keyapprovaldialog.h ++ ui/backendconfigwidget.h ++ ui/dnattributeorderconfigwidget.h ++ ui/cryptoconfigmodule.h ++ ui/cryptoconfigdialog.h ++ ui/directoryserviceswidget.h ++ DESTINATION ${INCLUDE_INSTALL_DIR}/kleo/ui COMPONENT Devel) ++ + install ( FILES libkleopatrarc.desktop DESTINATION ${CONFIG_INSTALL_DIR} RENAME libkleopatrarc ) +Index: kleopatra/libkleopatraclient/gui/CMakeLists.txt +=================================================================== +--- kleopatra/libkleopatraclient/gui/CMakeLists.txt (revision 1072331) ++++ kleopatra/libkleopatraclient/gui/CMakeLists.txt (revision 1072330) +@@ -19,4 +19,11 @@ + TARGETS kleopatraclientgui + DESTINATION ${LIB_INSTALL_DIR} + ) ++ + ++install( ++ FILES ++ certificaterequester.h ++ DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient/gui ++ ) ++ +Index: kleopatra/libkleopatraclient/core/CMakeLists.txt +=================================================================== +--- kleopatra/libkleopatraclient/core/CMakeLists.txt (revision 1072331) ++++ kleopatra/libkleopatraclient/core/CMakeLists.txt (revision 1072330) +@@ -38,3 +38,12 @@ + ) + + ++install( ++ FILES ++ initialization.h ++ command.h ++ selectcertificatecommand.h ++ signencryptfilescommand.h ++ DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient/core ++ ) ++ +Index: kleopatra/libkleopatraclient/CMakeLists.txt +=================================================================== +--- kleopatra/libkleopatraclient/CMakeLists.txt (revision 1072331) ++++ kleopatra/libkleopatraclient/CMakeLists.txt (revision 1072330) +@@ -6,3 +6,7 @@ + + add_subdirectory( tests ) + ++install( ++ FILES kleopatraclient_export.h ++ DESTINATION ${INCLUDE_INSTALL_DIR}/libkleopatraclient ++ ) +Index: libkpgp/CMakeLists.txt +=================================================================== +--- libkpgp/CMakeLists.txt (revision 1072331) ++++ libkpgp/CMakeLists.txt (revision 1072330) +@@ -34,3 +34,12 @@ + install(FILES kpgp.upd DESTINATION ${KCONF_UPDATE_INSTALL_DIR}) + install(PROGRAMS kpgp-3.1-upgrade-address-data.pl DESTINATION ${KCONF_UPDATE_INSTALL_DIR}) + ++install(FILES ++ kpgp.h ++ kpgpbase.h ++ kpgpblock.h ++ kpgpkey.h ++ kpgpui.h ++ libkpgp_export.h ++ DESTINATION ${INCLUDE_INSTALL_DIR}/kpgp COMPONENT Devel ) ++ diff --git a/source/kde/kdepim/kdepim.SlackBuild b/source/kde/kdepim/kdepim.SlackBuild index ea4c5d8f8..5c7b53474 100755 --- a/source/kde/kdepim/kdepim.SlackBuild +++ b/source/kde/kdepim/kdepim.SlackBuild @@ -47,6 +47,9 @@ echo "Building kdepim-$VERSION..." tar xvf $CWD/../src/kdepim-$VERSION.tar.?z* || exit 1 cd kdepim-$VERSION +# Install the kleopatra headers, or else kopete-cryptography will not build: +cat $CWD/kdepim-4.4.0-install-headers.patch | patch -p0 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -57,6 +60,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ @@ -65,7 +69,7 @@ cd build -DSYSCONF_INSTALL_DIR=/etc/kde \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ .. - make $NUMJOBS || exit 1 + make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 cd - diff --git a/source/kde/kdepim/slack-desc b/source/kde/kdepim/slack-desc index 9427ca458..7a66c176c 100644 --- a/source/kde/kdepim/slack-desc +++ b/source/kde/kdepim/slack-desc @@ -6,7 +6,7 @@ # customary to leave one space after the ':'. |-----handy-ruler-----------------------------------------------------| -kdepim: kdepim +kdepim: kdepim (KDE Personal Information Management applications) kdepim: kdepim: The KDE-PIM project aims to bring together those who wish to help kdepim: design, implement, test, etc. anything that's to do with personal diff --git a/source/kde/kdepimlibs/kdepimlibs.SlackBuild b/source/kde/kdepimlibs/kdepimlibs.SlackBuild index e8c760c1e..9fe4b1b84 100755 --- a/source/kde/kdepimlibs/kdepimlibs.SlackBuild +++ b/source/kde/kdepimlibs/kdepimlibs.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdepimlibs/slack-desc b/source/kde/kdepimlibs/slack-desc index b858aed65..cbd08ba48 100644 --- a/source/kde/kdepimlibs/slack-desc +++ b/source/kde/kdepimlibs/slack-desc @@ -6,7 +6,7 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdepimlibs: kdepimlibs +kdepimlibs: kdepimlibs (Libraries for KDE-PIM) kdepimlibs: kdepimlibs: This module includes libraries that are central to the development and kdepimlibs: execution of a KDE-PIM application. diff --git a/source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild b/source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild index 9a1158f29..5595221a5 100755 --- a/source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild +++ b/source/kde/kdeplasma-addons/kdeplasma-addons.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdeplasma-addons/slack-desc b/source/kde/kdeplasma-addons/slack-desc index be77dc019..a9bc5738f 100644 --- a/source/kde/kdeplasma-addons/slack-desc +++ b/source/kde/kdeplasma-addons/slack-desc @@ -8,7 +8,7 @@ |-----handy-ruler------------------------------------------------------| kdeplasma-addons: kdeplasma-addons (Plasma addons for KDE) kdeplasma-addons: -kdeplasma-addons: Plasmoids (or widgets) for the KDE 4 Plasma desktop shell. +kdeplasma-addons: Plasmoids (or widgets) for the KDE Plasma Desktop shell. kdeplasma-addons: kdeplasma-addons: kdeplasma-addons: diff --git a/source/kde/kdesdk/kdesdk.SlackBuild b/source/kde/kdesdk/kdesdk.SlackBuild index 4730478e9..5c6f5730f 100755 --- a/source/kde/kdesdk/kdesdk.SlackBuild +++ b/source/kde/kdesdk/kdesdk.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdesdk/slack-desc b/source/kde/kdesdk/slack-desc index 97aee6f28..f954a27a1 100644 --- a/source/kde/kdesdk/slack-desc +++ b/source/kde/kdesdk/slack-desc @@ -6,12 +6,12 @@ # customary to leave one space after the ':'. |-----handy-ruler-----------------------------------------------------| -kdesdk: kdesdk +kdesdk: kdesdk (KDE SDK) kdesdk: kdesdk: KDE Software Development Kit. This is a collection of applications -kdesdk: and tools used by KDE developers. It also has example code for use -kdesdk: in learning KDE programming or starting a new KDE application. -kdesdk: +kdesdk: and tools used to develop on the KDE Platform. It also contains +kdesdk: example code for use in learning KDE programming or starting a new +kdesdk: KDE application. kdesdk: kdesdk: kdesdk: diff --git a/source/kde/kdetoys/kdetoys.SlackBuild b/source/kde/kdetoys/kdetoys.SlackBuild index c086ea506..dbfe023fb 100755 --- a/source/kde/kdetoys/kdetoys.SlackBuild +++ b/source/kde/kdetoys/kdetoys.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdetoys/slack-desc b/source/kde/kdetoys/slack-desc index b08036be0..9af6c6025 100644 --- a/source/kde/kdetoys/slack-desc +++ b/source/kde/kdetoys/slack-desc @@ -6,10 +6,10 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdetoys: kdetoys (toys for KDE) +kdetoys: kdetoys (Toys for the KDE Software Compilation) kdetoys: -kdetoys: Some toys for use with KDE such as amor, kteatime, ktux, -kdetoys: kweatherreport, and kweatherservice. +kdetoys: Some toys for the KDE Software Compilation such as amor, kteatime, +kdetoys: ktux, kweatherreport, and kweatherservice. kdetoys: kdetoys: kdetoys: diff --git a/source/kde/kdeutils/kdeutils.SlackBuild b/source/kde/kdeutils/kdeutils.SlackBuild index 91f0a0280..66b543293 100755 --- a/source/kde/kdeutils/kdeutils.SlackBuild +++ b/source/kde/kdeutils/kdeutils.SlackBuild @@ -57,6 +57,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdeutils/slack-desc b/source/kde/kdeutils/slack-desc index 9b0cd18c9..2972d01fd 100644 --- a/source/kde/kdeutils/slack-desc +++ b/source/kde/kdeutils/slack-desc @@ -6,12 +6,12 @@ # customary to leave one space after the ':'. |-----handy-ruler---------------------------------------------------| -kdeutils: kdeutils -kdeutils: -kdeutils: This package includes various utilities for KDE such as ark, kcalc, -kdeutils: kcharselect, kdessh, kdf, kfloppy, kgpg, ktimer, kwalletmanager, -kdeutils: kwikdisk, okteta, superkaramba, and sweeper. +kdeutils: kdeutils (KDE Utilities) kdeutils: +kdeutils: This package includes utilities for the KDE Software Compilation +kdeutils: such as ark, kcalc, kcharselect, kdessh, kdf, kfloppy, kgpg, +kdeutils: ktimer, kwalletmanager, kwikdisk, okteta, superkaramba, and +kdeutils: sweeper. kdeutils: kdeutils: kdeutils: diff --git a/source/kde/kdevelop/kdevelop.SlackBuild b/source/kde/kdevelop/kdevelop.SlackBuild index 8ae15058e..430f480bd 100755 --- a/source/kde/kdevelop/kdevelop.SlackBuild +++ b/source/kde/kdevelop/kdevelop.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -56,9 +56,9 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX=/usr \ -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ diff --git a/source/kde/kdevelop/local.options b/source/kde/kdevelop/local.options index 6cd6aa66b..59095fb99 100644 --- a/source/kde/kdevelop/local.options +++ b/source/kde/kdevelop/local.options @@ -1 +1 @@ -VERSION=3.9.91 +VERSION=4.0.0 diff --git a/source/kde/kdevelop/slack-desc b/source/kde/kdevelop/slack-desc index bdf047d5f..49f2da129 100644 --- a/source/kde/kdevelop/slack-desc +++ b/source/kde/kdevelop/slack-desc @@ -6,7 +6,7 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -kdevelop: kdevelop (KDE development environment) +kdevelop: kdevelop (development environment for KDE) kdevelop: kdevelop: The KDevelop integrated C/C++ application development environment. kdevelop: diff --git a/source/kde/kdevplatform/kdevplatform.SlackBuild b/source/kde/kdevplatform/kdevplatform.SlackBuild index 870c29a84..d24b94db0 100755 --- a/source/kde/kdevplatform/kdevplatform.SlackBuild +++ b/source/kde/kdevplatform/kdevplatform.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -56,9 +56,9 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX=/usr \ -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ diff --git a/source/kde/kdevplatform/local.options b/source/kde/kdevplatform/local.options index 210f53e4d..624badec2 100644 --- a/source/kde/kdevplatform/local.options +++ b/source/kde/kdevplatform/local.options @@ -1 +1 @@ -VERSION=0.9.91 +VERSION=1.0.0 diff --git a/source/kde/kdewebdev/include-tidy.patch b/source/kde/kdewebdev/include-tidy.patch new file mode 100644 index 000000000..fd4de940e --- /dev/null +++ b/source/kde/kdewebdev/include-tidy.patch @@ -0,0 +1,13 @@ +--- klinkstatus/src/tidy/tidyx.h.orig 2009-09-03 09:55:38.886267704 -0500 ++++ klinkstatus/src/tidy/tidyx.h 2009-09-03 09:57:29.032269520 -0500 +@@ -48,8 +48,8 @@ + Created 2002-07-11 by Charles Reitzel + */ + +-#include <tidy.h> +-#include <buffio.h> ++#include "/tmp/package-kdewebdev/usr/include/tidy/tidy.h" ++#include "/tmp/package-kdewebdev/usr/include/tidy/buffio.h" + + #include <config-tidy.h> + diff --git a/source/kde/kdewebdev/kdewebdev.SlackBuild b/source/kde/kdewebdev/kdewebdev.SlackBuild index 457536297..47e484992 100755 --- a/source/kde/kdewebdev/kdewebdev.SlackBuild +++ b/source/kde/kdewebdev/kdewebdev.SlackBuild @@ -54,7 +54,7 @@ echo "Building kdewebdev-$VERSION..." tar xvf $CWD/../src/kdewebdev-$VERSION.tar.?z* || exit 1 cd kdewebdev-$VERSION -zcat $CWD/kde4-kdewebdev-findtidy.diff.gz | patch -p0 --verbose || exit 1 +#zcat $CWD/kde4-kdewebdev-findtidy.diff.gz | patch -p0 --verbose || exit 1 chown -R root:root . find . \ @@ -65,10 +65,13 @@ find . \ # Maybe we won't need this again... # -DWITH_RUBY:BOOL=OFF \ +cp klinkstatus/src/tidy/tidyx.h{,.orig} +zcat $CWD/include-tidy.patch.gz | patch -p0 mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/kdewebdev/slack-desc b/source/kde/kdewebdev/slack-desc index a082d057a..294ef22e4 100644 --- a/source/kde/kdewebdev/slack-desc +++ b/source/kde/kdewebdev/slack-desc @@ -6,10 +6,10 @@ # customary to leave one space after the ':'. |-----handy-ruler--------------------------------------------------| -kdewebdev: kdewebdev (web development package for the K Desktop Environment) +kdewebdev: kdewebdev (web development package for the KDE Platform) kdewebdev: -kdewebdev: The kdewebdev package contains Quanta Plus and other applications -kdewebdev: which are useful for web development. +kdewebdev: The kdewebdev package contains applications which are useful for +kdewebdev: web development. kdewebdev: kdewebdev: kdewebdev: diff --git a/source/kde/kdewebdev/tidy/tidy.SlackBuild b/source/kde/kdewebdev/tidy/tidy.SlackBuild index e487d95eb..6d8c3a7dd 100755 --- a/source/kde/kdewebdev/tidy/tidy.SlackBuild +++ b/source/kde/kdewebdev/tidy/tidy.SlackBuild @@ -1,5 +1,5 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,19 @@ # This file is an example, so feel free to fix it if it gets out of date. :-) PKGNAM=tidy -VERSION=${VERSION:-20090604T2303} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-20100503T2309} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} @@ -36,6 +45,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG diff --git a/source/kde/kdewebdev/tidy/tidy.build b/source/kde/kdewebdev/tidy/tidy.build index ee7b821f4..b638b24ed 100755 --- a/source/kde/kdewebdev/tidy/tidy.build +++ b/source/kde/kdewebdev/tidy/tidy.build @@ -1,5 +1,5 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,10 +24,19 @@ # New cvs version - 20080502 PKGNAM=tidy -VERSION=20090604T2303 -ARCH=${ARCH:-x86_64} +VERSION=20100503T2309 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} @@ -42,6 +51,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP diff --git a/source/kde/koffice/koffice.SlackBuild b/source/kde/koffice/koffice.SlackBuild index 1945b990d..d7332bf5b 100755 --- a/source/kde/koffice/koffice.SlackBuild +++ b/source/kde/koffice/koffice.SlackBuild @@ -46,6 +46,9 @@ cd $TMP echo "Building koffice-$VERSION..." tar xvf $CWD/../src/koffice-$VERSION.tar.?z* || exit 1 cd koffice-$VERSION + +zcat $CWD/koffice.krita.png14.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -56,6 +59,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/koffice/koffice.krita.png14.diff b/source/kde/koffice/koffice.krita.png14.diff new file mode 100644 index 000000000..252107de0 --- /dev/null +++ b/source/kde/koffice/koffice.krita.png14.diff @@ -0,0 +1,11 @@ +--- ./krita/ui/kis_png_converter.cpp.orig 2010-01-08 04:42:41.000000000 -0600 ++++ ./krita/ui/kis_png_converter.cpp 2010-02-25 12:01:11.000000000 -0600 +@@ -404,7 +404,7 @@ + + png_byte signature[8]; + iod->peek((char*)signature, 8); +- if (!png_check_sig(signature, 8)) { ++ if (!(png_sig_cmp(signature, 0, 8) == 0)) { + iod->close(); + return (KisImageBuilder_RESULT_BAD_FETCH); + } diff --git a/source/kde/koffice/local.options b/source/kde/koffice/local.options index ccb0cb13a..d98d655d6 100644 --- a/source/kde/koffice/local.options +++ b/source/kde/koffice/local.options @@ -1 +1,2 @@ -VERSION=2.0.2 +VERSION=2.1.2 +BUILD=2 diff --git a/source/kde/konq-plugins/konq-plugins.SlackBuild b/source/kde/konq-plugins/konq-plugins.SlackBuild index 8dc20cc99..870e60812 100755 --- a/source/kde/konq-plugins/konq-plugins.SlackBuild +++ b/source/kde/konq-plugins/konq-plugins.SlackBuild @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/konq-plugins/local.options b/source/kde/konq-plugins/local.options new file mode 100644 index 000000000..dc6e9bd41 --- /dev/null +++ b/source/kde/konq-plugins/local.options @@ -0,0 +1 @@ +VERSION=4.4.0 diff --git a/source/kde/kopete-cryptography/doinst.sh b/source/kde/kopete-cryptography/doinst.sh new file mode 100644 index 000000000..22d4849bc --- /dev/null +++ b/source/kde/kopete-cryptography/doinst.sh @@ -0,0 +1,5 @@ + +if [ -x usr/bin/update-desktop-database ]; then + usr/bin/update-desktop-database usr/share/applications >/dev/null 2>&1 +fi + diff --git a/source/kde/kopete-cryptography/kopete-cryptography.SlackBuild b/source/kde/kopete-cryptography/kopete-cryptography.SlackBuild new file mode 100755 index 000000000..b75eb6418 --- /dev/null +++ b/source/kde/kopete-cryptography/kopete-cryptography.SlackBuild @@ -0,0 +1,91 @@ +#!/bin/sh + +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PRGNAM=kopete-cryptography +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM + +# Set the config option variables if they are not already set: +if [ -r ../KDE.options ]; then + . ../KDE.options +fi + +# The global options may be overridden here (if needed): +if [ -r ./local.options ]; then + . ./local.options +fi + +# Avoid a version number in .la files: +if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt +fi + +rm -rf $PKG +mkdir -p $PKG/usr +cd $TMP +echo "Building $PRGNAM-$VERSION..." +tar xvf $CWD/../src/extragear/$PRGNAM-$VERSION.tar.?z* || exit 1 +cd $PRGNAM-$VERSION + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc/kde \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +if [ -d $PKG/usr/man ]; then + gzip -9 $PKG/usr/man/man?/* +fi + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a COPYING* $PKG/usr/doc/$PRGNAM-$VERSION + +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PRGNAM-$(echo $VERSION | tr - _)-$ARCH-$BUILD.txz + diff --git a/source/kde/kopete-cryptography/local.options b/source/kde/kopete-cryptography/local.options new file mode 100644 index 000000000..fda42958d --- /dev/null +++ b/source/kde/kopete-cryptography/local.options @@ -0,0 +1 @@ +VERSION=1.3.0-kde4.4.0 diff --git a/source/kde/kopete-cryptography/slack-desc b/source/kde/kopete-cryptography/slack-desc new file mode 100644 index 000000000..7529a8b1e --- /dev/null +++ b/source/kde/kopete-cryptography/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +kopete-cryptography: kopete-cryptography (crypto support for kopete) +kopete-cryptography: +kopete-cryptography: Cryptographic support for Kopete, the KDE Instant Messenger. +kopete-cryptography: +kopete-cryptography: +kopete-cryptography: +kopete-cryptography: +kopete-cryptography: +kopete-cryptography: +kopete-cryptography: +kopete-cryptography: diff --git a/source/kde/ktorrent/ktorrent.SlackBuild b/source/kde/ktorrent/ktorrent.SlackBuild index acebafd2a..57cf6ae1e 100755 --- a/source/kde/ktorrent/ktorrent.SlackBuild +++ b/source/kde/ktorrent/ktorrent.SlackBuild @@ -44,7 +44,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP echo "Building ktorrent-$VERSION..." -tar xvf $CWD/../src/extragear/ktorrent-$VERSION.tar.?z* || exit 1 +tar xvf $CWD/../src/extragear/ktorrent-${VERSION}.tar.?z* || exit 1 cd ktorrent-$VERSION chown -R root:root . find . \ @@ -56,6 +56,7 @@ find . \ mkdir -p build cd build cmake \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_BUILD_TYPE=Release \ diff --git a/source/kde/ktorrent/local.options b/source/kde/ktorrent/local.options index 17ea83467..b95a478ad 100644 --- a/source/kde/ktorrent/local.options +++ b/source/kde/ktorrent/local.options @@ -1 +1 @@ -VERSION=3.2.2 +VERSION=3.3.4 diff --git a/source/kde/ktorrent/slack-desc b/source/kde/ktorrent/slack-desc index 486e33d38..fbf151f79 100644 --- a/source/kde/ktorrent/slack-desc +++ b/source/kde/ktorrent/slack-desc @@ -6,9 +6,9 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -ktorrent: ktorrent (BitTorrent program for KDE) +ktorrent: ktorrent (KDE BitTorrent program) ktorrent: -ktorrent: KTorrent is a BitTorrent program for KDE with many features: +ktorrent: KTorrent is a BitTorrent program with many features: ktorrent: Download torrent files (of course :-), upload and download speed ktorrent: capping, Internet searching, UDP trackers, port forwarding with UPnP, ktorrent: IP blocking, importing of partially or fully downloaded files, diff --git a/source/kde/oxygen-icons/oxygen-icons.SlackBuild b/source/kde/oxygen-icons/oxygen-icons.SlackBuild new file mode 100755 index 000000000..bedc8e1b0 --- /dev/null +++ b/source/kde/oxygen-icons/oxygen-icons.SlackBuild @@ -0,0 +1,86 @@ +#!/bin/sh + +# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008 Robby Workman, Northport, AL, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=oxygen-icons + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +# Set the config option variables if they are not already set: +if [ -r ../KDE.options ]; then + . ../KDE.options +fi + +# The global options may be overridden here (if needed): +if [ -r ./local.options ]; then + . ./local.options +fi + +# Avoid a version number in .la files: +if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt +fi + +rm -rf $PKG +mkdir -p $TMP $PKG + +cd $TMP +echo "Building $PKGNAM-$VERSION..." +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/../src/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + cmake \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_BUILD_TYPE=Release \ + -DCMAKE_INSTALL_PREFIX:PATH=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc/kde \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a AUTHORS CONTRIBUTING COPYING TODO-smallversions $PKG/usr/doc/$PKGNAM-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/kde/oxygen-icons/slack-desc b/source/kde/oxygen-icons/slack-desc new file mode 100644 index 000000000..5c1c15cb1 --- /dev/null +++ b/source/kde/oxygen-icons/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' on +# the right side marks the last column you can put a character in. You must make +# exactly 11 lines for the formatting to be correct. It's also customary to +# leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +oxygen-icons: oxygen-icons (Oxygen theme for the KDE Plasma Desktop) +oxygen-icons: +oxygen-icons: Oxygen provides a complete and modern icon theme for KDE. +oxygen-icons: +oxygen-icons: +oxygen-icons: +oxygen-icons: +oxygen-icons: +oxygen-icons: +oxygen-icons: Visit the Oxygen project online: http://www.oxygen-icons.org +oxygen-icons: diff --git a/source/kde/polkit-kde-1/local.options b/source/kde/polkit-kde-1/local.options new file mode 100644 index 000000000..711ed9e81 --- /dev/null +++ b/source/kde/polkit-kde-1/local.options @@ -0,0 +1,2 @@ +#VERSION=0.95.1 +VERSION=r1120537 diff --git a/source/kde/polkit-kde-1/polkit-kde-1.SlackBuild b/source/kde/polkit-kde-1/polkit-kde-1.SlackBuild new file mode 100755 index 000000000..eab0d56b1 --- /dev/null +++ b/source/kde/polkit-kde-1/polkit-kde-1.SlackBuild @@ -0,0 +1,93 @@ +#!/bin/sh + +# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-polkit-kde-1 + + +# Set the config option variables if they are not already set: +if [ -r ../KDE.options ]; then + . ../KDE.options +fi + +# The global options may be overridden here (if needed): +if [ -r ./local.options ]; then + . ./local.options +fi + +# Avoid a version number in .la files: +if [ -d /usr/lib${LIBDIRSUFFIX}/kde ]; then + QTDIR=/usr/lib${LIBDIRSUFFIX}/kde +fi + +rm -rf $PKG +mkdir -p $PKG/usr +cd $TMP +echo "Building polkit-kde-1-$VERSION..." +tar xvf $CWD/../src/polkit-kde-1-$VERSION.tar.?z* || exit 1 +cd polkit-kde-1-$VERSION + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +if [ -d $PKG/usr/man ]; then + gzip -9 $PKG/usr/man/man?/* +fi + +mkdir -p $PKG/usr/doc/polkit-kde-1-$VERSION +cp -a \ + COPYING* README* \ + $PKG/usr/doc/polkit-kde-1-$VERSION + +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/polkit-kde-1-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/n/bluez-utils/slack-desc b/source/kde/polkit-kde-1/slack-desc index 159f02466..8e0a3ad64 100644 --- a/source/n/bluez-utils/slack-desc +++ b/source/kde/polkit-kde-1/slack-desc @@ -5,15 +5,14 @@ # make exactly 11 lines for the formatting to be correct. It's also # customary to leave one space after the ':'. - |-----handy-ruler------------------------------------------------------| -bluez-utils: bluez-utils (Utilities for working with Bluetooth(TM)) -bluez-utils: -bluez-utils: The bluez-utils package contains utilities for supporting -bluez-utils: Bluetooth(TM) on Linux. -bluez-utils: -bluez-utils: For more info, visit: http://www.bluez.org -bluez-utils: -bluez-utils: -bluez-utils: -bluez-utils: -bluez-utils: + |-----handy-ruler-----------------------------------------------------| +polkit-kde-1: polkit-kde-1 (KDE polkit authenticator) +polkit-kde-1: +polkit-kde-1: This is a polkit authenticator for KDE. +polkit-kde-1: +polkit-kde-1: +polkit-kde-1: +polkit-kde-1: +polkit-kde-1: +polkit-kde-1: +polkit-kde-1: diff --git a/source/kde/polkit-qt-1/local.options b/source/kde/polkit-qt-1/local.options new file mode 100644 index 000000000..c40c7ac4c --- /dev/null +++ b/source/kde/polkit-qt-1/local.options @@ -0,0 +1,2 @@ +#VERSION=0.95.1 +VERSION=r1118744 diff --git a/source/kde/polkit-qt-1/polkit-qt-1.SlackBuild b/source/kde/polkit-qt-1/polkit-qt-1.SlackBuild new file mode 100755 index 000000000..646b6ebb0 --- /dev/null +++ b/source/kde/polkit-qt-1/polkit-qt-1.SlackBuild @@ -0,0 +1,90 @@ +#!/bin/sh + +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-polkit-qt-1 + + +# Set the config option variables if they are not already set: +if [ -r ../KDE.options ]; then + . ../KDE.options +fi + +# The global options may be overridden here (if needed): +if [ -r ./local.options ]; then + . ./local.options +fi + +# Avoid a version number in .la files: +if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt +fi + +rm -rf $PKG +mkdir -p $PKG/usr +cd $TMP +echo "Building polkit-qt-1-$VERSION..." +tar xvf $CWD/../src/polkit-qt-1-$VERSION.tar.?z* || exit 1 +cd polkit-qt-1-$VERSION + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +if [ -d $PKG/usr/man ]; then + gzip -9 $PKG/usr/man/man?/* +fi + +mkdir -p $PKG/usr/doc/polkit-qt-1-$VERSION +cp -a COPYING* README* $PKG/usr/doc/polkit-qt-1-$VERSION + +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/polkit-qt-1-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/kde/polkit-qt-1/slack-desc b/source/kde/polkit-qt-1/slack-desc new file mode 100644 index 000000000..ea4ffe06f --- /dev/null +++ b/source/kde/polkit-qt-1/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +polkit-qt-1: polkit-qt-1 (Qt polkit API wrapper) +polkit-qt-1: +polkit-qt-1: polkit-qt-1 aims to make it easy for Qt developers to take advantage +polkit-qt-1: of the polkit API. It is a convenience wrapper around QAction and +polkit-qt-1: QAbstractButton that lets you integrate those two components +polkit-qt-1: easily with polkit. +polkit-qt-1: +polkit-qt-1: +polkit-qt-1: +polkit-qt-1: Homepage: http://techbase.kde.org/Polkit-Qt-1 +polkit-qt-1: diff --git a/source/kde/skanlite/local.options b/source/kde/skanlite/local.options index 5d5991bf0..e7ebfea91 100644 --- a/source/kde/skanlite/local.options +++ b/source/kde/skanlite/local.options @@ -1 +1 @@ -VERSION=0.3-kde4.2.4 +VERSION=0.4-kde4.4.0 diff --git a/source/kde/skanlite/skanlite.SlackBuild b/source/kde/skanlite/skanlite.SlackBuild index 759a5eac7..a156933cf 100755 --- a/source/kde/skanlite/skanlite.SlackBuild +++ b/source/kde/skanlite/skanlite.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -56,7 +56,6 @@ find . \ cmake \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX=/usr \ -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ diff --git a/source/kdei/kde-l10n.SlackBuild b/source/kdei/kde-l10n/kde-l10n.SlackBuild index f8e7ad8cd..1b522bf81 100755 --- a/source/kdei/kde-l10n.SlackBuild +++ b/source/kdei/kde-l10n/kde-l10n.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Robby Workman Northport, AL, USA -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -35,7 +35,7 @@ if [ ! -r ./languages ]; then done fi -[ -z $VERSION ] && export VERSION=4.2.4 +[ -z $VERSION ] && export VERSION=4.4.3 [ -z $ARCH ] && export ARCH=noarch [ -z $BUILD ] && export BUILD=1 @@ -47,6 +47,8 @@ if [ -z "$SLKCFLAGS" ]; then export SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then export SLKCFLAGS="-O2 -fPIC" + else + export SLKCFLAGS="-O2" fi fi @@ -77,7 +79,6 @@ cd build cmake \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX=/usr \ -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc/kde \ @@ -90,6 +91,11 @@ cd - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null ) +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + find . -type f -exec gzip -9 {} \; + ) +fi mkdir -p $PKG/install cat $CWD/slack-desc/slack-desc.kde-l10n-$PKGLANG > $PKG/install/slack-desc cd $PKG diff --git a/source/kdei/languages b/source/kdei/kde-l10n/languages index e77d8cf89..47b709a08 100644 --- a/source/kdei/languages +++ b/source/kdei/kde-l10n/languages @@ -1,24 +1,28 @@ ar bg -bn_IN ca +ca@valencia cs csb da de el en_GB +eo es et eu fi fr +fy ga gl gu he hi +hr hu +id is it ja @@ -26,13 +30,11 @@ kk km kn ko -ku lt lv mai mk ml -mr nb nds nl @@ -43,12 +45,12 @@ pt pt_BR ro ru +si sk sl sr sv tg -th tr uk wa diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ar b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ar index c1850ab65..c1850ab65 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ar +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ar diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-bg b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bg index 4210b1fbf..4210b1fbf 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-bg +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bg diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-bn_IN b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bn_IN index 2f7c7c03b..2f7c7c03b 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-bn_IN +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-bn_IN diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ca b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca index 0642c7453..0642c7453 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ca +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia new file mode 100644 index 000000000..0f1a95772 --- /dev/null +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ca@valencia @@ -0,0 +1,11 @@ +kde-l10n-ca: kde-l10n-ca@valencia +kde-l10n-ca@valencia: +kde-l10n-ca@valencia: Catalan (Valencian) language support for KDE. +kde-l10n-ca@valencia: +kde-l10n-ca@valencia: +kde-l10n-ca@valencia: +kde-l10n-ca@valencia: +kde-l10n-ca@valencia: +kde-l10n-ca@valencia: +kde-l10n-ca@valencia: +kde-l10n-ca@valencia: diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-cs b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-cs index a9ff293c5..a9ff293c5 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-cs +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-cs diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-csb b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-csb index a430c78e0..a430c78e0 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-csb +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-csb diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-da b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-da index 9cdb27d9f..9cdb27d9f 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-da +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-da diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-de b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-de index e90b9624e..e90b9624e 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-de +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-de diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-el b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-el index 3e6b56e3d..3e6b56e3d 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-el +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-el diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-en_GB b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-en_GB index 7bd1861a2..7bd1861a2 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-en_GB +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-en_GB diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-eo b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eo index 70a4484a8..70a4484a8 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-eo +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eo diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-es b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-es index 333cf6421..333cf6421 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-es +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-es diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-et b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-et index ac801ed02..ac801ed02 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-et +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-et diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-eu b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eu index 3576364a5..3576364a5 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-eu +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-eu diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-fi b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fi index 74ed56f04..74ed56f04 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-fi +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fi diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-fr b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fr index 8a70d56de..8a70d56de 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-fr +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fr diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-fy b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fy index 93195d0f5..93195d0f5 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-fy +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-fy diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ga b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ga index fc07a274a..fc07a274a 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ga +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ga diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-gl b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gl index 58eaca77f..58eaca77f 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-gl +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gl diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-gu b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gu index 79c5ae5a8..79c5ae5a8 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-gu +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-gu diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-he b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-he index 3ab491b7e..3ab491b7e 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-he +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-he diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-hi b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hi index 7575bb963..7575bb963 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-hi +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hi diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hne b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hne new file mode 100644 index 000000000..3ff7676bb --- /dev/null +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hne @@ -0,0 +1,11 @@ +kde-l10n-hne: kde-l10n-hne +kde-l10n-hne: +kde-l10n-hne: Chhattisgarhi language support for KDE. +kde-l10n-hne: +kde-l10n-hne: +kde-l10n-hne: +kde-l10n-hne: +kde-l10n-hne: +kde-l10n-hne: +kde-l10n-hne: +kde-l10n-hne: diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hr b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hr new file mode 100644 index 000000000..711dc1271 --- /dev/null +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hr @@ -0,0 +1,11 @@ +kde-l10n-hr: kde-l10n-hr +kde-l10n-hr: +kde-l10n-hr: Croatian language support for KDE. +kde-l10n-hr: +kde-l10n-hr: +kde-l10n-hr: +kde-l10n-hr: +kde-l10n-hr: +kde-l10n-hr: +kde-l10n-hr: +kde-l10n-hr: diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-hu b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hu index 1ecc0c424..1ecc0c424 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-hu +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-hu diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-id b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-id new file mode 100644 index 000000000..6e5bd8a3a --- /dev/null +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-id @@ -0,0 +1,11 @@ +kde-l10n-id: kde-l10n-id +kde-l10n-id: +kde-l10n-id: Indonesian language support for KDE. +kde-l10n-id: +kde-l10n-id: +kde-l10n-id: +kde-l10n-id: +kde-l10n-id: +kde-l10n-id: +kde-l10n-id: +kde-l10n-id: diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-is b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-is index a9fa3c209..a9fa3c209 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-is +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-is diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-it b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-it index a90d4ec0c..a90d4ec0c 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-it +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-it diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ja b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ja index ba28704cb..ba28704cb 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ja +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ja diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-kk b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kk index 82f5143dc..82f5143dc 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-kk +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kk diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-km b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-km index 8f137c027..8f137c027 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-km +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-km diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-kn b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kn index 571e643c1..571e643c1 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-kn +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-kn diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ko b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ko index 935283b02..935283b02 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ko +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ko diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ku b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ku index b4a2ff031..b4a2ff031 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ku +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ku diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-lt b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lt index 733bc0a37..733bc0a37 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-lt +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lt diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-lv b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lv index e65b3521d..e65b3521d 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-lv +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-lv diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-mai b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mai index c6b883615..c6b883615 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-mai +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mai diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-mk b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mk index 4d65fb774..4d65fb774 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-mk +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mk diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ml b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ml index 6ff4b3c39..6ff4b3c39 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ml +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ml diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-mr b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mr index 39a721baa..39a721baa 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-mr +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-mr diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-nb b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nb index cee273ca0..cee273ca0 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-nb +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nb diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-nds b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nds index 6d0dfa72a..6d0dfa72a 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-nds +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nds diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-nl b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nl index 753364755..753364755 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-nl +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nl diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-nn b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nn index f3c10b1a6..f3c10b1a6 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-nn +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-nn diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-pa b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pa index 9b7b20091..9b7b20091 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-pa +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pa diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-pl b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pl index e5515a214..e5515a214 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-pl +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pl diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-pt b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt index f71c7ee7c..f71c7ee7c 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-pt +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-pt_BR b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt_BR index fd8609787..fd8609787 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-pt_BR +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-pt_BR diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ro b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ro index 7eea0dd78..7eea0dd78 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ro +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ro diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ru b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ru index e857af46d..e857af46d 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ru +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ru diff --git a/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-si b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-si new file mode 100644 index 000000000..1eb88a2ed --- /dev/null +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-si @@ -0,0 +1,11 @@ +kde-l10n-si: kde-l10n-si +kde-l10n-si: +kde-l10n-si: Sinhala language support for KDE. +kde-l10n-si: +kde-l10n-si: +kde-l10n-si: +kde-l10n-si: +kde-l10n-si: +kde-l10n-si: +kde-l10n-si: +kde-l10n-si: diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-sk b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sk index 65f1e8cee..65f1e8cee 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-sk +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sk diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-sl b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sl index 8c341085a..8c341085a 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-sl +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sl diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-sr b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sr index 732a5c935..732a5c935 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-sr +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sr diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-sv b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sv index 8c4838feb..8c4838feb 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-sv +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-sv diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-ta b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ta index 795d799fc..795d799fc 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-ta +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-ta diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-tg b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tg index e8b7456cc..e8b7456cc 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-tg +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tg diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-th b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-th index 0c9a65c3e..0c9a65c3e 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-th +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-th diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-tr b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tr index 9ba72ec35..9ba72ec35 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-tr +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-tr diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-uk b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-uk index f918327ef..f918327ef 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-uk +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-uk diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-wa b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-wa index 3bcc46c47..3bcc46c47 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-wa +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-wa diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-zh_CN b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_CN index 93632055b..93632055b 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-zh_CN +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_CN diff --git a/source/kdei/slack-desc/slack-desc.kde-l10n-zh_TW b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_TW index 8b173b9e8..8b173b9e8 100644 --- a/source/kdei/slack-desc/slack-desc.kde-l10n-zh_TW +++ b/source/kdei/kde-l10n/slack-desc/slack-desc.kde-l10n-zh_TW diff --git a/source/kdei/koffice/koffice-l10n.SlackBuild b/source/kdei/koffice/koffice-l10n.SlackBuild index 03645f2ff..8a570dd84 100755 --- a/source/kdei/koffice/koffice-l10n.SlackBuild +++ b/source/kdei/koffice/koffice-l10n.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Robby Workman Northport, AL, USA -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -35,7 +35,7 @@ if [ ! -r ./languages ]; then done fi -[ -z $VERSION ] && export VERSION=2.0.2 +[ -z $VERSION ] && export VERSION=2.1.2 [ -z $ARCH ] && export ARCH=noarch [ -z $BUILD ] && export BUILD=1 diff --git a/source/kdei/koffice/languages b/source/kdei/koffice/languages deleted file mode 100644 index 5449c176a..000000000 --- a/source/kdei/koffice/languages +++ /dev/null @@ -1,27 +0,0 @@ -ca -cs -da -de -el -en_GB -es -et -fr -fy -gl -hi -it -ja -kk -nb -nds -nl -pl -pt -pt_BR -sv -tr -uk -wa -zh_CN -zh_TW diff --git a/source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ca@valencia b/source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ca@valencia new file mode 100644 index 000000000..982d6f1b4 --- /dev/null +++ b/source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-ca@valencia @@ -0,0 +1,11 @@ +koffice-l10n-ca@valencia: koffice-l10n-ca@valencia +koffice-l10n-ca@valencia: +koffice-l10n-ca@valencia: Valencian (southern Catalan) language support for KOffice. +koffice-l10n-ca@valencia: +koffice-l10n-ca@valencia: +koffice-l10n-ca@valencia: +koffice-l10n-ca@valencia: +koffice-l10n-ca@valencia: +koffice-l10n-ca@valencia: +koffice-l10n-ca@valencia: +koffice-l10n-ca@valencia: diff --git a/source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hne b/source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hne new file mode 100644 index 000000000..2a1be13fa --- /dev/null +++ b/source/kdei/koffice/slack-desc/slack-desc.koffice-l10n-hne @@ -0,0 +1,11 @@ +koffice-l10n-hne: koffice-l10n-hne +koffice-l10n-hne: +koffice-l10n-hne: Chhattisgarhi language support for KOffice. +koffice-l10n-hne: +koffice-l10n-hne: +koffice-l10n-hne: +koffice-l10n-hne: +koffice-l10n-hne: +koffice-l10n-hne: +koffice-l10n-hne: +koffice-l10n-hne: diff --git a/source/l/ConsoleKit/ConsoleKit.SlackBuild b/source/l/ConsoleKit/ConsoleKit.SlackBuild new file mode 100755 index 000000000..db40f1396 --- /dev/null +++ b/source/l/ConsoleKit/ConsoleKit.SlackBuild @@ -0,0 +1,141 @@ +#!/bin/sh + +# Slackware build script for ConsoleKit + +# Copyright 2009 Robby Workman, Northport, Alabama, USA +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=ConsoleKit +VERSION=${VERSION:-20100129} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 +cd $PRGNAM-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +## Not sure what of these we need now - no time to look yet +# Thanks to the GSB project for the patch hints :-) +# http://bugs.freedesktop.org/show_bug.cgi?id=19020 +# http://bugs.freedesktop.org/show_bug.cgi?id=20471 +#zcat $CWD/patches/consolekit-dbus-permissions.patch.gz | patch -p1 || exit 1 +# Prevent make install from erroring out on docbook validation +#zcat $CWD/patches/consolekit-skipvalidation.patch.gz | patch -p1 || exit 1 +# Clean up at_console compat files, bug #257761 +zcat $CWD/patches/consolekit-0.2.10-cleanup_console_tags.patch.gz | patch -p1 || exit 1 + +# Configure: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./autogen.sh \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --with-pid-file=/var/run/ConsoleKit/pid \ + --enable-docbook-docs \ + --enable-pam-module=no \ + --disable-static \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +mkdir -p $PKG/usr/lib/ConsoleKit/run-session.d +cat $CWD/pam-foreground-compat.ck > \ + $PKG/usr/lib/ConsoleKit/run-session.d/pam-foreground-compat.ck +chmod 0755 $PKG/usr/lib/ConsoleKit/run-session.d/pam-foreground-compat.ck + +# Let's not clobber config files +mv $PKG/etc/ConsoleKit/seats.d/00-primary.seat \ + $PKG/etc/ConsoleKit/seats.d/00-primary.seat.new +mv $PKG/etc/dbus-1/system.d/ConsoleKit.conf \ + $PKG/etc/dbus-1/system.d/ConsoleKit.conf.new + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +( cd $PKG/usr/man || exit 1 + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done +) + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README TODO \ + $PKG/usr/doc/$PRGNAM-$VERSION +( + cd $PKG/usr/doc/$PRGNAM-$VERSION ; ln -s /usr/share/gtk-doc/html/polkit-1 html +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/ConsoleKit/doinst.sh b/source/l/ConsoleKit/doinst.sh new file mode 100644 index 000000000..217d76055 --- /dev/null +++ b/source/l/ConsoleKit/doinst.sh @@ -0,0 +1,16 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/ConsoleKit/seats.d/00-primary.seat.new +config etc/dbus-1/system.d/ConsoleKit.conf.new + diff --git a/source/l/ConsoleKit/pam-foreground-compat.ck b/source/l/ConsoleKit/pam-foreground-compat.ck new file mode 100644 index 000000000..979127272 --- /dev/null +++ b/source/l/ConsoleKit/pam-foreground-compat.ck @@ -0,0 +1,16 @@ +#!/bin/sh +TAGDIR=/var/run/console + +[ -n "${CK_SESSION_USER_UID}" ] || exit 1 + +TAGFILE="${TAGDIR}/$(getent passwd ${CK_SESSION_USER_UID} | cut -f 1 -d:)" + +if [ "$1" = "session_added" ]; then + mkdir -p "${TAGDIR}" + echo "${CK_SESSION_ID}" >> "$TAGFILE" +fi + +if [ "$1" = "session_removed" ] && [ -e "$TAGFILE" ]; then + sed -i "\%^$CK_SESSION_ID\$%d" "${TAGFILE}" + [ -s "${TAGFILE}" ] || rm -f "${TAGFILE}" +fi diff --git a/source/l/ConsoleKit/patches/consolekit-0.2.10-cleanup_console_tags.patch b/source/l/ConsoleKit/patches/consolekit-0.2.10-cleanup_console_tags.patch new file mode 100644 index 000000000..d1699d900 --- /dev/null +++ b/source/l/ConsoleKit/patches/consolekit-0.2.10-cleanup_console_tags.patch @@ -0,0 +1,65 @@ +# http://patches.ubuntu.com/by-release/extracted/ubuntu/c/consolekit/0.2.10-1ubuntu9/ +--- a/src/main.c 2008-07-25 03:19:34.000000000 +0200 ++++ b/src/main.c 2008-07-26 00:25:13.000000000 +0200 +@@ -149,6 +149,43 @@ + unlink (CONSOLE_KIT_PID_FILE); + } + ++#define CONSOLE_TAGS_DIR "/var/run/console" ++ ++static void ++delete_console_tags (void) ++{ ++ GDir *dir; ++ GError *error = NULL; ++ const gchar *name; ++ ++ g_debug ("Cleaning up %s", CONSOLE_TAGS_DIR); ++ ++ dir = g_dir_open (CONSOLE_TAGS_DIR, 0, &error); ++ if (dir == NULL) { ++ g_debug ("Couldn't open directory %s: %s", CONSOLE_TAGS_DIR, ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ while ((name = g_dir_read_name (dir)) != NULL) { ++ gchar *file; ++ file = g_build_filename (CONSOLE_TAGS_DIR, name, NULL); ++ ++ g_debug ("Removing tag file: %s", file); ++ if (unlink (file) == -1) { ++ g_warning ("Couldn't delete tag file: %s", file); ++ } ++ g_free (file); ++ } ++} ++ ++static void ++cleanup (void) ++{ ++ delete_console_tags (); ++ delete_pid (); ++} ++ + /* copied from nautilus */ + static int debug_log_pipes[2]; + +@@ -229,7 +266,7 @@ + snprintf (pid, sizeof (pid), "%lu\n", (long unsigned) getpid ()); + written = write (pf, pid, strlen (pid)); + close (pf); +- g_atexit (delete_pid); ++ g_atexit (cleanup); + } else { + g_warning ("Unable to write pid file %s: %s", + CONSOLE_KIT_PID_FILE, +@@ -312,6 +349,8 @@ + + g_debug ("initializing console-kit-daemon %s", VERSION); + ++ delete_console_tags (); ++ + create_pid_file (); + + manager = ck_manager_new (); diff --git a/source/l/ConsoleKit/patches/consolekit-dbus-permissions.patch b/source/l/ConsoleKit/patches/consolekit-dbus-permissions.patch new file mode 100644 index 000000000..0cab28583 --- /dev/null +++ b/source/l/ConsoleKit/patches/consolekit-dbus-permissions.patch @@ -0,0 +1,175 @@ +diff -up ConsoleKit-0.3.0/data/ConsoleKit.conf.consolekit ConsoleKit-0.3.0/data/ConsoleKit.conf +--- ConsoleKit-0.3.0/data/ConsoleKit.conf.consolekit 2008-04-19 01:39:49.000000000 -0400 ++++ ConsoleKit-0.3.0/data/ConsoleKit.conf 2009-04-08 11:40:33.347814036 -0400 +@@ -8,88 +8,131 @@ + <allow own="org.freedesktop.ConsoleKit"/> + + <!-- Allow all methods on interfaces --> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session"/> ++ <allow send_destination="org.freedesktop.ConsoleKit"/> + </policy> + + <!-- Deny all and then allow some methods on interfaces --> + <policy context="default"> +- <deny send_interface="org.freedesktop.ConsoleKit.Manager"/> +- <deny send_interface="org.freedesktop.ConsoleKit.Seat"/> +- <deny send_interface="org.freedesktop.ConsoleKit.Session"/> ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.DBus.Introspectable"/> ++ <deny send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager"/> ++ <deny send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat"/> ++ <deny send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session"/> + <deny send_destination="org.freedesktop.ConsoleKit" + send_interface="org.freedesktop.DBus.Properties" /> + +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="Restart"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="Stop"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="OpenSession"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="CloseSession"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSeats"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" ++ send_member="GetSessions"/> ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSessionForCookie"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSessionForUnixProcess"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetCurrentSession"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSessionsForUnixUser"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSessionsForUser"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSystemIdleHint"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSystemIdleSinceHint"/> + +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="GetId"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="GetSessions"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="GetDevices"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="GetActiveSession"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="CanActivateSessions"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="ActivateSession"/> + +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetId"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetSeatId"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetLoginSessionId"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetSessionType"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetUser"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetUnixUser"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetX11Display"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetX11DisplayDevice"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetDisplayDevice"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetRemoteHostName"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="IsActive"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="IsLocal"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetCreationTime"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="Activate"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetIdleHint"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" ++ send_member="SetIdleHint"/> ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetIdleSinceHint"/> + </policy> + diff --git a/source/l/ConsoleKit/patches/consolekit-skipvalidation.patch b/source/l/ConsoleKit/patches/consolekit-skipvalidation.patch new file mode 100644 index 000000000..c4bf89d7a --- /dev/null +++ b/source/l/ConsoleKit/patches/consolekit-skipvalidation.patch @@ -0,0 +1,12 @@ +diff -up ConsoleKit-0.3.0/doc/dbus/Makefile.in.skipvalidation ConsoleKit-0.3.0/doc/dbus/Makefile.in +--- ConsoleKit-0.3.0/doc/dbus/Makefile.in.skipvalidation 2009-02-27 20:17:36.784329106 -0500 ++++ ConsoleKit-0.3.0/doc/dbus/Makefile.in 2009-02-27 20:18:15.701316733 -0500 +@@ -427,7 +427,7 @@ uninstall-am: uninstall-htmldocDATA + + + @DOCBOOK_DOCS_ENABLED_TRUE@ConsoleKit.html : $(SPEC_XML_FILES) +-@DOCBOOK_DOCS_ENABLED_TRUE@ $(XMLTO) xhtml-nochunks -m $(top_srcdir)/doc/dbus/config.xsl ConsoleKit.xml ++@DOCBOOK_DOCS_ENABLED_TRUE@ $(XMLTO) --skip-validation xhtml-nochunks -m $(top_srcdir)/doc/dbus/config.xsl ConsoleKit.xml + + org.freedesktop.ConsoleKit.Manager.ref.xml : $(top_srcdir)/src/org.freedesktop.ConsoleKit.Manager.xml spec-to-docbook.xsl + $(XSLTPROC) $(top_srcdir)/doc/dbus/spec-to-docbook.xsl $< | tail -n +2 > $@ diff --git a/source/n/bluez-libs/slack-desc b/source/l/ConsoleKit/slack-desc index f9a57e285..63326799d 100644 --- a/source/n/bluez-libs/slack-desc +++ b/source/l/ConsoleKit/slack-desc @@ -5,15 +5,15 @@ # make exactly 11 lines for the formatting to be correct. It's also # customary to leave one space after the ':'. - |-----handy-ruler------------------------------------------------------| -bluez-libs: bluez-libs (Bluetooth(TM) wireless libraries) -bluez-libs: -bluez-libs: The bluez-libs package contains an implementation of the Bluetooth(TM) -bluez-libs: wireless standards specifications for Linux. -bluez-libs: -bluez-libs: For more info, visit: http://www.bluez.org -bluez-libs: -bluez-libs: -bluez-libs: -bluez-libs: -bluez-libs: + |-----handy-ruler-----------------------------------------------------| +ConsoleKit: ConsoleKit (user, login, and seat tracking framework) +ConsoleKit: +ConsoleKit: ConsoleKit is a framework for defining and tracking users, login +ConsoleKit: sessions, and seats. +ConsoleKit: +ConsoleKit: +ConsoleKit: +ConsoleKit: +ConsoleKit: +ConsoleKit: Homepage: http://freedesktop.org/wiki/Software/ConsoleKit +ConsoleKit: diff --git a/source/l/PyQt/PyQt.SlackBuild b/source/l/PyQt/PyQt.SlackBuild index 4232d5f46..7d89221a2 100755 --- a/source/l/PyQt/PyQt.SlackBuild +++ b/source/l/PyQt/PyQt.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for PyQt # Copyright 2008 Aleksandar Samardzic <asamardzic@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,12 +24,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified by Robby Workman <rworkman@slackware.com> +# Modified by Eric Hameleers <alien@slackware.com> -VERSION=${VERSION:-4.4.4} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-4.7.3} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-PyQt @@ -40,14 +50,20 @@ elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP -rm -rf PyQt-$VERSION -tar xvf $CWD/PyQt-x11-gpl-$VERSION.tar.bz2 || exit 1 +rm -rf PyQt-x11-gpl-$VERSION +tar xvf $CWD/PyQt-x11-gpl-$VERSION.tar.?z* || exit 1 cd PyQt-x11-gpl-$VERSION || exit 1 + +# Fix phonon detection: +zcat $CWD/PyQt.phonon.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -55,10 +71,13 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -echo "yes" | \ - python configure.py \ - CFLAGS="$SLKCFLAGS" \ - CXXFLAGS="$SLKCFLAGS" +# This avoids compiling a version number into KDE's .la files: +export QTDIR=/usr/lib${LIBDIRSUFFIX}/qt + +export CFLAGS="$SLKCFLAGS" +export CXXFLAGS="$SLKCFLAGS" + +python configure.py --confirm-license --verbose make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -75,5 +94,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/PyQt-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/PyQt-$(echo $VERSION |tr - _)-$ARCH-$BUILD.txz diff --git a/source/l/PyQt/PyQt.info b/source/l/PyQt/PyQt.info index f041f25b7..f127e6d9c 100644 --- a/source/l/PyQt/PyQt.info +++ b/source/l/PyQt/PyQt.info @@ -1,2 +1,2 @@ HOMEPAGE="http://www.riverbankcomputing.co.uk/software/pyqt/" -DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/PyQt4/PyQt-x11-gpl-4.4.2.tar.gz" +DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/PyQt4/PyQt-x11-gpl-4.5.4.tar.gz" diff --git a/source/l/PyQt/PyQt.phonon.diff b/source/l/PyQt/PyQt.phonon.diff new file mode 100644 index 000000000..feda65096 --- /dev/null +++ b/source/l/PyQt/PyQt.phonon.diff @@ -0,0 +1,11 @@ +--- PyQt-x11-gpl-4.6.2/configure.py.orig 2010-01-08 23:39:46.000000000 +0100 ++++ PyQt-x11-gpl-4.6.2/configure.py 2010-01-08 23:45:18.000000000 +0100 +@@ -451,7 +451,7 @@ + generate_code("QtXmlPatterns") + + if "phonon" in pyqt_modules: +- generate_code("phonon") ++ generate_code("phonon", extra_include_dirs=["/usr/include/phonon"]) + + if "QtAssistant" in pyqt_modules: + generate_code("QtAssistant") diff --git a/source/l/PyQt/slack-desc b/source/l/PyQt/slack-desc index 036065434..4e01c51ac 100644 --- a/source/l/PyQt/slack-desc +++ b/source/l/PyQt/slack-desc @@ -5,15 +5,15 @@ # make exactly 11 lines for the formatting to be correct. It's also # customary to leave one space after the ':'. - |-----handy-ruler------------------------------------------------------| + |-----handy-ruler------------------------------------------------------| PyQt: PyQt (Python bindings for Qt) PyQt: PyQt: PyQt is a set of Python bindings for Trolltech's Qt application PyQt: framework and runs on all platforms supported by Qt. PyQt: -PyQt: Homepage: http://www.riverbankcomputing.co.uk/software/PyQt/ PyQt: PyQt: PyQt: PyQt: +PyQt: Homepage: http://www.riverbankcomputing.co.uk/software/PyQt/ PyQt: diff --git a/source/l/QScintilla/QScintilla.SlackBuild b/source/l/QScintilla/QScintilla.SlackBuild index 3625a067c..e72b5ae7a 100755 --- a/source/l/QScintilla/QScintilla.SlackBuild +++ b/source/l/QScintilla/QScintilla.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for QScintilla # Copyright 2008 Robby Workman <rworkman@slackware.com> Northport, AL, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,27 +23,38 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.3.2} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-2.4.3} +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-QScintilla +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf QScintilla-gpl-$VERSION -tar xvf $CWD/QScintilla-gpl-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/QScintilla-gpl-$VERSION.tar.?z* || exit 1 cd QScintilla-gpl-$VERSION || exit 1 chown -R root:root . find . \ diff --git a/source/l/QScintilla/QScintilla.info b/source/l/QScintilla/QScintilla.info deleted file mode 100644 index f7b71c771..000000000 --- a/source/l/QScintilla/QScintilla.info +++ /dev/null @@ -1,8 +0,0 @@ -PRGNAM="QScintilla" -VERSION="2.2" -HOMEPAGE="http://www.riverbankcomputing.co.uk/software/qscintilla/" -DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/QScintilla2/QScintilla-gpl-2.2.tar.gz" -MD5SUM="a6056c444494f3f849020d241f86c286" -MAINTAINER="Robby Workman" -EMAIL="rw@rlworkman.net" -APPROVED="" diff --git a/source/l/akonadi/README.html b/source/l/akonadi/README.html new file mode 100644 index 000000000..9bee704ed --- /dev/null +++ b/source/l/akonadi/README.html @@ -0,0 +1,3 @@ +downloaded from <a href="http://download.akonadi-project.org/">http://download.akonadi-project.org/</a> +<br> +<a href="http://pim.kde.org/akonadi/">akonadi Homepage</a> diff --git a/source/l/akonadi/akonadi.SlackBuild b/source/l/akonadi/akonadi.SlackBuild index 5fdd980b6..4b06c5755 100755 --- a/source/l/akonadi/akonadi.SlackBuild +++ b/source/l/akonadi/akonadi.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for akonadi # Copyright 2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,11 +23,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.2 -ARCH=${ARCH:-x86_64} +VERSION=1.3.1 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-akonadi @@ -41,6 +50,9 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/l/akonadi/slack-desc b/source/l/akonadi/slack-desc index d0c26bb62..a120cebf0 100644 --- a/source/l/akonadi/slack-desc +++ b/source/l/akonadi/slack-desc @@ -13,7 +13,7 @@ akonadi: and meta data providing concurrent read, write, and query access. akonadi: It will provide a unique desktop wide object identification and akonadi: retrieval. akonadi: -akonadi: Homepage: http://www.kdepim.org/akonadi/ akonadi: akonadi: +akonadi: Homepage: http://www.kdepim.org/akonadi/ akonadi: diff --git a/source/l/alsa-lib/alsa-lib.SlackBuild b/source/l/alsa-lib/alsa-lib.SlackBuild index f88d84550..dc88e4ad1 100755 --- a/source/l/alsa-lib/alsa-lib.SlackBuild +++ b/source/l/alsa-lib/alsa-lib.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,19 +21,25 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.0.18 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo alsa-lib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-alsa-lib -rm -rf $PKG -mkdir -p $TMP $PKG - if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -43,11 +49,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG + cd $TMP rm -rf alsa-lib-$VERSION -tar xvf $CWD/alsa-lib-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/alsa-lib-$VERSION.tar.?z* || exit 1 cd alsa-lib-$VERSION || exit 1 chown -R root:root . @@ -80,6 +92,14 @@ cp -a \ cp -a COPYING $PKG/usr/doc/alsa-lib-$VERSION/COPYING.lib cp -a aserver/COPYING $PKG/usr/doc/alsa-lib-$VERSION/COPYING.aserver +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/apr-util/apr-util.SlackBuild b/source/l/apr-util/apr-util.SlackBuild index a109d75bc..d160cbb96 100755 --- a/source/l/apr-util/apr-util.SlackBuild +++ b/source/l/apr-util/apr-util.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-1.3.9} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo apr-util-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -88,9 +101,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/apr-util-$VERSION cp -a \ - CHANGES INSTALL.MySQL LICENSE NOTICE \ + INSTALL.MySQL LICENSE NOTICE \ $PKG/usr/doc/apr-util-$VERSION +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + # This just seems like way too much stuff... #mv docs/dox/html $PKG/usr/doc/apr-util-$VERSION diff --git a/source/l/apr/apr.SlackBuild b/source/l/apr/apr.SlackBuild index b6f2237e1..65098b062 100755 --- a/source/l/apr/apr.SlackBuild +++ b/source/l/apr/apr.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-1.3.8} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo apr-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -74,9 +87,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/apr-$VERSION cp -a \ - CHANGES LICENSE NOTICE README.dev \ + LICENSE NOTICE README.dev \ $PKG/usr/doc/apr-$VERSION +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + # This just seems like way too much stuff... #mv docs/dox/html $PKG/usr/doc/apr-$VERSION diff --git a/source/l/atk/atk.SlackBuild b/source/l/atk/atk.SlackBuild index 6cea42737..f6d41da66 100755 --- a/source/l/atk/atk.SlackBuild +++ b/source/l/atk/atk.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.26.0 -ARCH=${ARCH:-x86_64} +PKGNAM=atk +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-atk @@ -40,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -73,7 +86,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/atk-$VERSION cp -a \ - AUTHORS COPYING NEWS README TODO \ + AUTHORS COPYING* NEWS README* TODO \ $PKG/usr/doc/atk-$VERSION mkdir -p $PKG/install diff --git a/source/l/attica/attica.SlackBuild b/source/l/attica/attica.SlackBuild new file mode 100755 index 000000000..8e3ab9aa7 --- /dev/null +++ b/source/l/attica/attica.SlackBuild @@ -0,0 +1,99 @@ +#!/bin/sh + +# Copyright 2009, 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VERSION=${VERSION:-0.1.3} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-attica + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf attica-$VERSION +tar xvf $CWD/attica-$VERSION.tar.?z* || exit 1 +cd attica-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ + PATH=$QTDIR/bin:$PATH \ + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/attica-$VERSION +cp -a AUTHORS* COPYING* README* \ + $PKG/usr/doc/attica-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/attica-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/attica/slack-desc b/source/l/attica/slack-desc new file mode 100644 index 000000000..40e293f5b --- /dev/null +++ b/source/l/attica/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +attica: attica (Qt Collaboration library) +attica: +attica: Attica is a Qt library that implements the freedesktop.org +attica: specification for the Open Collaboration Services API version 1.4. +attica: It grants easy access to the services such as querying information +attica: about persons and contents. +attica: +attica: +attica: +attica: Homepage: http://www.kde.org +attica: diff --git a/source/l/babl/babl-0.1.0-build-fixes.patch b/source/l/babl/babl-0.1.0-build-fixes.patch new file mode 100644 index 000000000..3cd055943 --- /dev/null +++ b/source/l/babl/babl-0.1.0-build-fixes.patch @@ -0,0 +1,20 @@ +--- babl-0.1.0.orig/extensions/Makefile.am 2009-04-17 12:05:15.000000000 -0500 ++++ babl-0.1.0/extensions/Makefile.am 2009-08-19 00:53:21.435970261 -0500 +@@ -1,7 +1,7 @@ + if OS_WIN32 + AM_LDFLAGS = -module -no-undefined + else +-AM_LDFLAGS = -module ++AM_LDFLAGS = -module -avoid-version + endif + + noinst_HEADERS = util.h +@@ -12,7 +12,7 @@ + -I$(top_srcdir)/babl \ + -I$(top_srcdir)/extensions + +-extdir = $(DESTDIR)$(libdir)/babl-@BABL_API_VERSION@ ++extdir = $(libdir)/babl-@BABL_API_VERSION@ + ext_LTLIBRARIES = \ + CIE-Lab.la \ + gegl-fixups.la \ diff --git a/source/l/babl/babl.SlackBuild b/source/l/babl/babl.SlackBuild index d646e0d2c..5e8f54afd 100755 --- a/source/l/babl/babl.SlackBuild +++ b/source/l/babl/babl.SlackBuild @@ -22,7 +22,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.0.22 +VERSION=0.1.0 ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} @@ -49,6 +49,10 @@ cd $TMP rm -rf babl-$VERSION tar xvf $CWD/babl-$VERSION.tar.bz2 || exit 1 cd babl-$VERSION || exit 1 + +zcat $CWD/babl-0.1.0-build-fixes.patch.gz | patch -p1 || exit 1 +sh autogen.sh + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/l/boost/boost.SlackBuild b/source/l/boost/boost.SlackBuild index bb9e8e8fb..508c8ff94 100755 --- a/source/l/boost/boost.SlackBuild +++ b/source/l/boost/boost.SlackBuild @@ -2,7 +2,7 @@ # Copyright 2007, 2008 Eric Hameleers, Eindhoven, NL # Copyright 2007-2008 Heinz Wiesinger -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,9 +25,19 @@ # bjam-build system mostly taken from SlackBuild by Eric Hameleers # Script modified by Robby Workman - no copyright claims or added terms -VERSION=1_38_0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=boost +VERSION=${VERSION:-$(echo $PKGNAM_*.tar.?z* | rev | cut -f 3- -d . | rev | cut -f 2- -d _)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -45,17 +55,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf boost_$VERSION -tar xvf $CWD/boost_$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/boost_$VERSION.tar.?z* || exit 1 cd boost_$VERSION || exit 1 -zcat $CWD/boost.ifdef_placement.diff.gz | patch -p1 --verbose || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -132,7 +143,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/boost-$PKG_VERSION # Do not copy 44MB of developer 'doc/html' into our package... -cp -a LICENSE_1_0.txt $PKG/usr/doc/boost-$PKG_VERSION +cp -a LICENSE* index.html $PKG/usr/doc/boost-$PKG_VERSION find $PKG/usr/doc -type f -exec chmod 0644 {} \; mkdir -p $PKG/install diff --git a/source/l/boost/boost.ifdef_placement.diff b/source/l/boost/boost.ifdef_placement.diff deleted file mode 100644 index 92dd6b55c..000000000 --- a/source/l/boost/boost.ifdef_placement.diff +++ /dev/null @@ -1,14 +0,0 @@ ---- ./boost/function/function_template.hpp.orig 2008-10-16 08:21:50.000000000 -0500 -+++ ./boost/function/function_template.hpp 2009-08-24 20:45:28.000000000 -0500 -@@ -950,10 +950,10 @@ - f.vtable->manager(f.functor, this->functor, - boost::detail::function::move_functor_tag); - f.vtable = 0; --#if !defined(BOOST_NO_EXCEPTIONS) - } else { - clear(); - } -+#if !defined(BOOST_NO_EXCEPTIONS) - } catch (...) { - vtable = 0; - throw; diff --git a/source/l/cairo/cairo.SlackBuild b/source/l/cairo/cairo.SlackBuild index a6ddc3447..655cf2f49 100755 --- a/source/l/cairo/cairo.SlackBuild +++ b/source/l/cairo/cairo.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.8.6 -ARCH=${ARCH:-x86_64} +VERSION=1.8.8 BUILD=${BUILD:-3} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf cairo-$VERSION -tar xvf $CWD/cairo-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/cairo-$VERSION.tar.?z* || exit 1 cd cairo-$VERSION chown -R root:root . find . \ @@ -55,6 +67,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Use libpng-1.4.x: +zcat $CWD/cairo.libpng14.diff.gz | patch -p0 --verbose || exit 1 + # Time to try leaving this out again? # --disable-xcb diff --git a/source/l/cairo/cairo.libpng14.diff b/source/l/cairo/cairo.libpng14.diff new file mode 100644 index 000000000..12bed2c0e --- /dev/null +++ b/source/l/cairo/cairo.libpng14.diff @@ -0,0 +1,11 @@ +--- ./configure.orig 2009-06-16 07:25:50.000000000 -0500 ++++ ./configure 2010-05-03 00:12:23.000000000 -0500 +@@ -27890,7 +27890,7 @@ + + if test "x$png_REQUIRES" = x; then + # libpng13 is GnuWin32's libpng-1.2.8 :-( +- for l in libpng12 libpng13 libpng10 ; do ++ for l in libpng14 libpng12 libpng13 libpng10 ; do + if $PKG_CONFIG --exists $l ; then + png_REQUIRES=$l + use_png=yes diff --git a/source/l/dbus-glib/dbus-glib.SlackBuild b/source/l/dbus-glib/dbus-glib.SlackBuild index 6c242f78d..dc8afddac 100755 --- a/source/l/dbus-glib/dbus-glib.SlackBuild +++ b/source/l/dbus-glib/dbus-glib.SlackBuild @@ -23,12 +23,21 @@ PRGNAM=dbus-glib -VERSION=0.80 -ARCH=${ARCH:-x86_64} +VERSION=0.86 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PRGNAM @@ -64,6 +73,7 @@ CXXFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ --localstatedir=/var \ + --mandir=/usr/man \ --enable-shared=yes \ --enable-static=no \ --build=$ARCH-slackware-linux @@ -74,6 +84,8 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +gzip -9 $PKG/usr/man/man?/*.? + mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION cp -a \ AUTHORS COPYING* HACKING INSTALL NEWS README* \ diff --git a/source/l/dbus-python/dbus-python.SlackBuild b/source/l/dbus-python/dbus-python.SlackBuild index d3a0dbeff..a9ff5e5b7 100755 --- a/source/l/dbus-python/dbus-python.SlackBuild +++ b/source/l/dbus-python/dbus-python.SlackBuild @@ -23,12 +23,21 @@ # http://dbus.freedesktop.org/releases/dbus-python/ - PRGNAM=dbus-python -VERSION=${VERSION:-0.83.0} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-0.83.1} +BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,6 +52,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/l/desktop-file-utils/desktop-file-utils.SlackBuild b/source/l/desktop-file-utils/desktop-file-utils.SlackBuild index 86d62f239..8beccbd5b 100755 --- a/source/l/desktop-file-utils/desktop-file-utils.SlackBuild +++ b/source/l/desktop-file-utils/desktop-file-utils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,20 @@ PKGNAM=desktop-file-utils -VERSION=${VERSION:-0.15} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -37,6 +47,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG @@ -46,6 +58,8 @@ rm -rf ${PKGNAM}-${VERSION} tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 +zcat $CWD/desktop-file-utils.quiet.warnings.diff.gz | patch -p1 --verbose || exit 1 + # Make sure ownerships and permissions are sane: chown -R root:root . find . \ @@ -100,6 +114,14 @@ cp -a \ AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff b/source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff new file mode 100644 index 000000000..8e1f17f96 --- /dev/null +++ b/source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff @@ -0,0 +1,18 @@ +--- ./src/update-desktop-database.c.orig 2010-03-09 20:33:41.000000000 -0600 ++++ ./src/update-desktop-database.c 2010-05-11 09:00:08.000000000 -0500 +@@ -135,15 +135,9 @@ + case MU_VALID: + break; + case MU_DISCOURAGED: +- udd_print (_("Warning in file \"%s\": usage of MIME type \"%s\" is " +- "discouraged (%s)\n"), +- desktop_file, mime_types[i], valid_error); + g_free (valid_error); + break; + case MU_INVALID: +- udd_print (_("Error in file \"%s\": \"%s\" is an invalid MIME type " +- "(%s)\n"), +- desktop_file, mime_types[i], valid_error); + g_free (valid_error); + /* not a break: we continue to the next mime type */ + continue; diff --git a/source/l/djvulibre/djvulibre.SlackBuild b/source/l/djvulibre/djvulibre.SlackBuild index ece718070..28e00a67b 100755 --- a/source/l/djvulibre/djvulibre.SlackBuild +++ b/source/l/djvulibre/djvulibre.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Robby Workman, Northport, Alabama, USA -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,14 +22,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=djvulibre -VERSION=${VERSION:-3.5.21} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +PKGNAM=djvulibre +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -40,14 +49,17 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -69,7 +81,7 @@ CXXFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --mandir=/usr/man \ --infodir=/usr/info \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --with-qt=/usr/lib${LIBDIRSUFFIX}/qt \ --build=$ARCH-slackware-linux @@ -102,15 +114,15 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ COPYING* COPYRIGHT INSTALL NEWS README* TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/ebook-tools/ebook-tools.SlackBuild b/source/l/ebook-tools/ebook-tools.SlackBuild new file mode 100755 index 000000000..690d71def --- /dev/null +++ b/source/l/ebook-tools/ebook-tools.SlackBuild @@ -0,0 +1,113 @@ +#!/bin/sh + +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=ebook-tools +VERSION=${VERSION:-0.1.1} +BUILD=${BUILD:-2} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} +rm -rf $PKG +mkdir -p $TMP $PKG + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +cd $TMP +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 + +# Fix some hard-coded pathnames for 64-bit: +cat $CWD/ebook-tools.paths.diff | patch -p1 --verbose || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Build and install: +mkdir -p build +cd build + cmake \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DLIB_INSTALL_DIR=/usr/lib${LIBDIRSUFFIX} \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DINCLUDE_INSTALL_DIR=/usr/include \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +# Remove lit2epub binary because it doesn't work without clit (which has +# distribution restrictions so we do not include it) +rm -f $PKG/usr/bin/lit2epub + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a \ + INSTALL LICENSE README TODO \ + $PKG/usr/doc/${PKGNAM}-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/ebook-tools/ebook-tools.paths.diff b/source/l/ebook-tools/ebook-tools.paths.diff new file mode 100644 index 000000000..3752b1069 --- /dev/null +++ b/source/l/ebook-tools/ebook-tools.paths.diff @@ -0,0 +1,12 @@ +diff -ur ebook-tools-0.1.1/src/libepub/CMakeLists.txt ebook-tools-0.1.1.rmhardcoded/src/libepub/CMakeLists.txt +--- ebook-tools-0.1.1/src/libepub/CMakeLists.txt 2008-06-07 20:20:14.000000000 +0100 ++++ ebook-tools-0.1.1.rmhardcoded/src/libepub/CMakeLists.txt 2008-12-15 02:59:58.621077025 +0000 +@@ -4,5 +4,5 @@ + + set_target_properties (epub PROPERTIES VERSION 0.1.1 SOVERSION 0) + +-install ( TARGETS epub RUNTIME DESTINATION bin LIBRARY DESTINATION lib ARCHIVE DESTINATION lib ) +-install ( FILES epub.h epub_shared.h DESTINATION include ) ++install ( TARGETS epub RUNTIME DESTINATION bin LIBRARY DESTINATION ${LIB_INSTALL_DIR} ARCHIVE DESTINATION ${LIB_INSTALL_DIR} ) ++install ( FILES epub.h epub_shared.h DESTINATION ${INCLUDE_INSTALL_DIR} ) + diff --git a/source/l/ebook-tools/slack-desc b/source/l/ebook-tools/slack-desc new file mode 100644 index 000000000..abb2ef883 --- /dev/null +++ b/source/l/ebook-tools/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler--------------------------------------------------| +ebook-tools: ebook-tools (access and convert various ebook file formats) +ebook-tools: +ebook-tools: Tools for accessing and converting various ebook file formats. +ebook-tools: +ebook-tools: +ebook-tools: +ebook-tools: +ebook-tools: +ebook-tools: +ebook-tools: Home page: http://sourceforge.net/projects/ebook-tools/ +ebook-tools: diff --git a/source/l/eggdbus/eggdbus.SlackBuild b/source/l/eggdbus/eggdbus.SlackBuild new file mode 100755 index 000000000..44a0c938e --- /dev/null +++ b/source/l/eggdbus/eggdbus.SlackBuild @@ -0,0 +1,123 @@ +#!/bin/sh + +# Slackware build script for eggdbus + +# Copyright 2009 Robby Workman Northport, Alabama, USA +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=eggdbus +VERSION=${VERSION:-0.6} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 +cd $PRGNAM-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./autogen.sh \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --disable-static \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README \ + $PKG/usr/doc/$PRGNAM-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/eggdbus/slack-desc b/source/l/eggdbus/slack-desc new file mode 100644 index 000000000..d2da2980c --- /dev/null +++ b/source/l/eggdbus/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +eggdbus: eggdbus (D-Bus bindings for GObject) +eggdbus: +eggdbus: Experimental D-Bus bindings for GObject. +eggdbus: +eggdbus: +eggdbus: +eggdbus: +eggdbus: +eggdbus: +eggdbus: Home: http://cgit.freedesktop.org/~david/eggdbus +eggdbus: diff --git a/source/l/eigen2/eigen2.SlackBuild b/source/l/eigen2/eigen2.SlackBuild index 4477b13cf..474e5ae91 100755 --- a/source/l/eigen2/eigen2.SlackBuild +++ b/source/l/eigen2/eigen2.SlackBuild @@ -22,10 +22,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=r948353 -ARCH=${ARCH:-x86_64} +VERSION=2.0.10 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-eigen2 @@ -39,14 +48,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf eigen2-$VERSION -tar xvf $CWD/eigen2-$VERSION.tar.bz2 || exit 1 -cd eigen2-$VERSION || exit 1 +rm -rf eigen-$VERSION +tar xvf $CWD/eigen2-$VERSION.tar.?z* || exit 1 +cd eigen || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/l/enchant/enchant.SlackBuild b/source/l/enchant/enchant.SlackBuild index bcd2cd7e9..d4f0eb9bc 100755 --- a/source/l/enchant/enchant.SlackBuild +++ b/source/l/enchant/enchant.SlackBuild @@ -24,11 +24,20 @@ # Modified by Robby Workman <rworkman at slackware.com> -VERSION=1.4.2 -ARCH=${ARCH:-x86_64} +VERSION=1.5.0 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j6 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-enchant @@ -42,13 +51,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf enchant-$VERSION -tar xvf $CWD/enchant-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/enchant-$VERSION.tar.xz || exit 1 cd enchant-$VERSION || exit 1 chown -R root:root . find . \ diff --git a/source/l/exiv2/exiv2.SlackBuild b/source/l/exiv2/exiv2.SlackBuild index 783fd7c57..2092df166 100755 --- a/source/l/exiv2/exiv2.SlackBuild +++ b/source/l/exiv2/exiv2.SlackBuild @@ -24,11 +24,20 @@ # Modified by Robby Workman <rworkman at slackware.com> -VERSION=0.18.1 -ARCH=${ARCH:-x86_64} +VERSION=0.18.2 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-exiv2 @@ -42,6 +51,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/l/fftw/fftw.SlackBuild b/source/l/fftw/fftw.SlackBuild new file mode 100755 index 000000000..ffed6f95c --- /dev/null +++ b/source/l/fftw/fftw.SlackBuild @@ -0,0 +1,152 @@ +#!/bin/sh + +# Slackware build script for fftw +# Written by Kyle Guinn <elyk03@gmail.com> + +PRGNAM=fftw +VERSION=${VERSION:-3.2.2} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM-$VERSION +OUTPUT=${OUTPUT:-/tmp} + +DOCS="AUTHORS CONVENTIONS COPY* INSTALL NEWS README* TODO doc/html" + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +if [ "${PORTABLE:-yes}" = "no" ]; then + # According to doc/fftw3.pdf the configure script should choose the best + # value for $CFLAGS. These variables must be unset so that the configure + # script will decide. + + # If you are interested in further optimizations such as alternative + # multithreading and support for other processors, check this page for + # details: + # http://www.fftw.org/fftw3_doc/Installation-on-Unix.html + unset CFLAGS + unset CXXFLAGS + unset FFLAGS + PKGARCH="custom" + do_portable="" +else + PKGARCH=$ARCH + do_portable="--enable-portable-binary" +fi + +if [ "${SSE:-no}" = "no" ]; then + do_sse="" +else + do_sse="--enable-sse" +fi + +if [ "${SSE2:-no}" = "no" ]; then + do_sse2="" +else + do_sse2="--enable-sse2" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 +cd $PRGNAM-$VERSION +chown -R root:root . +chmod -R u+w,go+r-w,a-st . + +# compile libfftw3 +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/fftw-$VERSION \ + --enable-shared \ + --disable-static \ + --enable-threads \ + $do_sse2 \ + $do_portable +make -j4 || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +# compile libfftw3f +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/fftw-$VERSION \ + --enable-shared \ + --disable-static \ + --enable-threads \ + --enable-float \ + $do_sse \ + $do_portable +make -j4 || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +# compile libfftw3l +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/fftw-$VERSION \ + --enable-shared \ + --disable-static \ + --enable-threads \ + --enable-long-double \ + $do_portable +make -j4 || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +( cd $PKG/usr/man + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l); do \ + ln -s $(readlink $i).gz $i.gz; \ + rm $i; \ + done +) + +rm -f $PKG/usr/info/dir +gzip -9 $PKG/usr/info/* + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/fftw/slack-desc b/source/l/fftw/slack-desc new file mode 100644 index 000000000..22a1130c2 --- /dev/null +++ b/source/l/fftw/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +fftw: fftw (Fastest Fourier Transform in the West) +fftw: +fftw: FFTW is a free collection of fast C routines for computing the +fftw: Discrete Fourier Transform in one or more dimensions. It includes +fftw: complex, real, symmetric, and parallel transforms, and can handle +fftw: arbitrary array sizes efficiently. FFTW is typically faster than +fftw: other publically-available FFT implementations, and is even +fftw: competitive with vendor-tuned libraries. +fftw: +fftw: Homepage: http://www.fftw.org/ +fftw: diff --git a/source/l/freetype/freetype.SlackBuild b/source/l/freetype/freetype.SlackBuild index 69c3f844b..1c1b25d39 100755 --- a/source/l/freetype/freetype.SlackBuild +++ b/source/l/freetype/freetype.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.3.9 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo freetype-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,17 +45,20 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-freetype + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP rm -rf freetype-$VERSION -tar xvf $CWD/freetype-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/freetype-$VERSION.tar.?z* || exit 1 cd freetype-$VERSION chown -R root:root . @@ -75,7 +87,7 @@ zcat $CWD/freetype.illadvisederror.diff.gz | patch -p1 --verbose || exit 1 #zcat $CWD/freetype.subpixel.rendering.diff.gz | patch -p1 --verbose || exit 1 chown -R root:root . -CFLAGS="$SLKCFLAGS" make setup CFG="--prefix=/usr --libdir=/usr/lib${LIBDIRSUFFIX} $ARCH-slackware-linux" +CFLAGS="$SLKCFLAGS" make setup CFG="--prefix=/usr --libdir=/usr/lib${LIBDIRSUFFIX} --build=$ARCH-slackware-linux" make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG diff --git a/source/l/fuse/fuse.SlackBuild b/source/l/fuse/fuse.SlackBuild index 96569eeab..0c5ddaa2d 100755 --- a/source/l/fuse/fuse.SlackBuild +++ b/source/l/fuse/fuse.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright (c) 2008, Antonio Hernandez Blas <hba.nihilismus@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -23,36 +23,46 @@ # Modified by Robby Workman <rworkman@slackware.com> # Modified by Eric Hameleers <alien@slackware.com> -PRGNAM=fuse -VERSION=2.7.4 -ARCH=${ARCH:-x86_64} +PKGNAM=fuse +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" - LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -71,11 +81,10 @@ CXXFLAGS="$SLKCFLAGS" \ --includedir=/usr/include \ --localstatedir=/var \ --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --enable-lib \ --enable-util \ --disable-static \ - --disable-kernel-module \ --build=${ARCH}-slackware-linux \ || exit 1 @@ -96,16 +105,24 @@ rm -rf $PKG/dev mkdir -p $PKG/lib mv $PKG/etc/udev $PKG/lib -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING COPYING.LIB FAQ Filesystems INSTALL NEWS README \ README.NFS doc/how-fuse-works doc/kernel.txt \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/gd/gd.SlackBuild b/source/l/gd/gd.SlackBuild index a367412bc..c33f20ba1 100755 --- a/source/l/gd/gd.SlackBuild +++ b/source/l/gd/gd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,10 +23,19 @@ PKGNAM=gd VERSION=${VERSION:-2.0.35} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-3} +BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -44,13 +53,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION +zcat $CWD/gd.png14.diff.gz | patch -p1 --verbose || exit 1 + # Make sure ownerships and permissions are sane: chown -R root:root . find . \ diff --git a/source/l/gd/gd.png14.diff b/source/l/gd/gd.png14.diff new file mode 100644 index 000000000..49841ee4f --- /dev/null +++ b/source/l/gd/gd.png14.diff @@ -0,0 +1,65 @@ +--- ./configure.ac.orig 2007-04-25 07:48:41.000000000 -0500 ++++ ./configure.ac 2010-02-12 01:37:29.000000000 -0600 +@@ -342,20 +342,20 @@ + [ --with-png=DIR where to find the png library],, + withval=yes) + +-# libpng12.so is a nightmare. We have to test separately for +-# libpng12-config and libpng-config. If we find libpng12-config, ++# libpng14.so is a nightmare. We have to test separately for ++# libpng14-config and libpng-config. If we find libpng14-config, + # we don't look for the other, which will just be a symlink to it, + # confusing autoconf into thinking the library itself will be named -lpng, + # which it won't be. Awful. This code will suffice unless the libpng + # authors decide to do this AGAIN. Which I really hope they won't. TBB + + if test "$withval" != no; then +- AC_PATH_PROG([LIBPNG12_CONFIG], [libpng12-config]) ++ AC_PATH_PROG([LIBPNG14_CONFIG], [libpng14-config]) + AC_PATH_PROG([LIBPNG_CONFIG], [libpng-config]) +- if test -n "$LIBPNG12_CONFIG"; then +- libpng_CPPFLAGS=`libpng12-config --cflags` ++ if test -n "$LIBPNG14_CONFIG"; then ++ libpng_CPPFLAGS=`libpng14-config --cflags` + # should be --ldopts, but it's currently broken +- libpng_LDFLAGS=`libpng12-config --ldflags` ++ libpng_LDFLAGS=`libpng14-config --ldflags` + libpng_LDFLAGS=`echo " $libpng_LDFLAGS" | sed 's/ -l[[^ ]][[^ ]]*//g'` + elif test -n "$LIBPNG_CONFIG"; then + libpng_CPPFLAGS=`libpng-config --cflags` +@@ -375,9 +375,9 @@ + _ldflags="$LDFLAGS" + LDFLAGS="$libpng_LDFLAGS $LDFLAGS" + +- if test -n "$LIBPNG12_CONFIG"; then +- AC_CHECK_LIB(png12,png_create_read_struct, +- [LIBS="-lpng12 $LIBS" ++ if test -n "$LIBPNG14_CONFIG"; then ++ AC_CHECK_LIB(png14,png_create_read_struct, ++ [LIBS="-lpng14 $LIBS" + FEATURES="GD_PNG $FEATURES" + AC_DEFINE(HAVE_LIBPNG, 1, [ Define if you have the png library. ])], + [LDFLAGS="$_ldflags" +@@ -402,9 +402,9 @@ + AC_MSG_WARN([libpng is required - see http://www.libpng.org/pub/png/]) + fi + +-#TBB: png12's png_create_read_struct is just as good ++#TBB: png14's png_create_read_struct is just as good + #2.0.23: should be = not == +-if test "$ac_cv_lib_png12_png_create_read_struct" = yes; then ++if test "$ac_cv_lib_png14_png_create_read_struct" = yes; then + ac_cv_lib_png_png_create_read_struct=yes + fi + +--- ./gd_png.c.orig 2007-06-14 14:51:41.000000000 -0500 ++++ ./gd_png.c 2010-02-12 01:43:36.000000000 -0600 +@@ -149,7 +149,7 @@ + return NULL; + } + +- if (!png_check_sig (sig, 8)) { /* bad signature */ ++ if (!(png_sig_cmp(sig, 0, 8) == 0)) { /* bad signature */ + return NULL; /* bad signature */ + } + diff --git a/source/l/gd/gdlib.pc b/source/l/gd/gdlib.pc index 7bd439b63..e39512638 100644 --- a/source/l/gd/gdlib.pc +++ b/source/l/gd/gdlib.pc @@ -10,5 +10,5 @@ Name: gd-devel Description: A graphics library for quick creation of PNG or JPEG images Version: @VERSION@ Requires: -Libs: -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng12 -lz -lm +Libs: -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng14 -lz -lm Cflags: -I${prefix}/include diff --git a/source/l/gegl/gegl.SlackBuild b/source/l/gegl/gegl.SlackBuild index cc5855224..86e07aa89 100755 --- a/source/l/gegl/gegl.SlackBuild +++ b/source/l/gegl/gegl.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # Copyright 2008, 2009 Robby Workman, Northport, Alabama, USA # All rights reserved. # @@ -22,9 +22,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.0.22 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +VERSION=${VERSION:-$(echo gegl-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -41,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -63,6 +75,7 @@ CFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --docdir=/usr/doc/gegl-$VERSION \ --enable-gtk-doc \ + --disable-docs \ --enable-mmx \ --disable-sse \ --build=$ARCH-slackware-linux @@ -77,7 +90,15 @@ mkdir -p $PKG/usr/doc/gegl-$VERSION cp -a \ AUTHORS COPYING* INSTALL NEWS README TODO \ $PKG/usr/doc/gegl-$VERSION -( cd $PKG/usr/doc/gegl-$VERSION ; ln -s /usr/share/gtk-doc/html/gegl/ html ) +#( cd $PKG/usr/doc/gegl-$VERSION ; ln -s /usr/share/gtk-doc/html/gegl/ html ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libungif/libungif.SlackBuild b/source/l/giflib/giflib.SlackBuild index 5e9ff8c06..e2390a253 100755 --- a/source/l/libungif/libungif.SlackBuild +++ b/source/l/giflib/giflib.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +VERSION=${VERSION:-$(echo giflib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} -VERSION=4.1.4 -ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,18 +44,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-libungif +PKG=$TMP/package-giflib + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP -rm -rf libungif-$VERSION -tar xvf $CWD/libungif-$VERSION.tar.bz2 || exit 1 -cd libungif-$VERSION +rm -rf giflib-$VERSION +tar xvf $CWD/giflib-$VERSION.tar.?z* || exit 1 +cd giflib-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -58,36 +70,40 @@ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ --with-x=no \ - $ARCH-slackware-linux + --disable-static \ + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -mkdir -p $PKG/usr/doc/libungif-$VERSION +# Make some compatibility symlinks +( cd $PKG/usr/lib${LIBDIRSUFFIX} + ln -s libgif.so.4 libungif.so.4 + ln -s libgif.so libungif.so +) + +mkdir -p $PKG/usr/doc/giflib-$VERSION cp -a \ - AUTHORS BUGS COPYING ChangeLog INSTALL NEWS ONEWS README TODO \ - UNCOMPRESSED_GIF doc \ - $PKG/usr/doc/libungif-$VERSION -rm $PKG/usr/doc/libungif-$VERSION/doc/Makefile* + AUTHORS BUGS COPYING DEVELOPERS INSTALL NEWS ONEWS README TODO \ + $PKG/usr/doc/giflib-$VERSION +cp -a doc $PKG/usr/doc/giflib-$VERSION/html +rm $PKG/usr/doc/giflib-$VERSION/html/Makefile* + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -## I don't believe we need all this slop. Correct me if I'm wrong. -# I've been corrected... -#rm -rf $PKG/usr/bin - -( cd $PKG/usr/lib${LIBDIRSUFFIX} - SOVER=$(/bin/ls libungif.so.*.*.* | cut -f 3-5 -d .) - ln -sf libungif.so.$SOVER libgif.so.$SOVER - ln -sf libgif.so.$SOVER libgif.so.4 - ln -sf libgif.so.4 libgif.so - ln -sf libungif.a libgif.a ) - mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/libungif-$VERSION-$ARCH-$BUILD.txz - +/sbin/makepkg -l y -c n $TMP/giflib-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libungif/slack-desc b/source/l/giflib/slack-desc index 144ee02a9..322b6e418 100644 --- a/source/l/libungif/slack-desc +++ b/source/l/giflib/slack-desc @@ -6,14 +6,14 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -libungif: libungif (GIF image format library) -libungif: -libungif: A library to load and save (uncompressed only) images using GIF, -libungif: or Graphics Interchange Format. GIF was introduced by CompuServe -libungif: in 1987, but is still widely used today (especially on web pages.) -libungif: -libungif: -libungif: -libungif: -libungif: -libungif: +giflib: giflib (GIF image format library) +giflib: +giflib: A library to load and save (uncompressed only) images using GIF, +giflib: or Graphics Interchange Format. GIF was introduced by CompuServe +giflib: in 1987, but is still widely used today (especially on web pages.) +giflib: +giflib: +giflib: +giflib: +giflib: +giflib: diff --git a/source/l/glib2/glib-CVE-2008-4316.diff b/source/l/glib2/glib-CVE-2008-4316.diff deleted file mode 100644 index 5d9bddee1..000000000 --- a/source/l/glib2/glib-CVE-2008-4316.diff +++ /dev/null @@ -1,62 +0,0 @@ ---- trunk/glib/gbase64.c 2009/02/23 04:30:06 7897 -+++ trunk/glib/gbase64.c 2009/03/12 13:30:55 7973 -@@ -54,8 +54,9 @@ - * - * The output buffer must be large enough to fit all the data that will - * be written to it. Due to the way base64 encodes you will need -- * at least: @len * 4 / 3 + 6 bytes. If you enable line-breaking you will -- * need at least: @len * 4 / 3 + @len * 4 / (3 * 72) + 7 bytes. -+ * at least: (@len / 3 + 1) * 4 + 4 bytes (+ 4 may be needed in case of -+ * non-zero state). If you enable line-breaking you will need at least: -+ * ((@len / 3 + 1) * 4 + 4) / 72 + 1 bytes of extra space. - * - * @break_lines is typically used when putting base64-encoded data in emails. - * It breaks the lines at 72 columns instead of putting all of the text on -@@ -233,8 +234,14 @@ - g_return_val_if_fail (data != NULL, NULL); - g_return_val_if_fail (len > 0, NULL); - -- /* We can use a smaller limit here, since we know the saved state is 0 */ -- out = g_malloc (len * 4 / 3 + 4); -+ /* We can use a smaller limit here, since we know the saved state is 0, -+ +1 is needed for trailing \0, also check for unlikely integer overflow */ -+ if (len >= ((G_MAXSIZE - 1) / 4 - 1) * 3) -+ g_error("%s: input too large for Base64 encoding (%"G_GSIZE_FORMAT" chars)", -+ G_STRLOC, len); -+ -+ out = g_malloc ((len / 3 + 1) * 4 + 1); -+ - outlen = g_base64_encode_step (data, len, FALSE, out, &state, &save); - outlen += g_base64_encode_close (FALSE, out + outlen, &state, &save); - out[outlen] = '\0'; -@@ -275,7 +282,8 @@ - * - * The output buffer must be large enough to fit all the data that will - * be written to it. Since base64 encodes 3 bytes in 4 chars you need -- * at least: @len * 3 / 4 bytes. -+ * at least: (@len / 4) * 3 + 3 bytes (+ 3 may be needed in case of non-zero -+ * state). - * - * Return value: The number of bytes of output that was written - * -@@ -358,7 +366,8 @@ - gsize *out_len) - { - guchar *ret; -- gint input_length, state = 0; -+ gsize input_length; -+ gint state = 0; - guint save = 0; - - g_return_val_if_fail (text != NULL, NULL); -@@ -368,7 +377,9 @@ - - g_return_val_if_fail (input_length > 1, NULL); - -- ret = g_malloc0 (input_length * 3 / 4); -+ /* We can use a smaller limit here, since we know the saved state is 0, -+ +1 used to avoid calling g_malloc0(0), and hence retruning NULL */ -+ ret = g_malloc0 ((input_length / 4) * 3 + 1); - - *out_len = g_base64_decode_step (text, input_length, ret, &state, &save); - diff --git a/source/l/glib2/glib2.SlackBuild b/source/l/glib2/glib2.SlackBuild index 23211af80..b662e37f3 100755 --- a/source/l/glib2/glib2.SlackBuild +++ b/source/l/glib2/glib2.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,17 +21,24 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.18.4} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo glib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-glib2 -rm -rf $PKG -mkdir -p $TMP $PKG/usr if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,15 +49,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG/usr cd $TMP rm -rf glib-$VERSION -tar xvf $CWD/glib-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/glib-$VERSION.tar.?z* || exit 1 cd glib-$VERSION -zcat $CWD/glib-CVE-2008-4316.diff.gz | patch -p1 --verbose || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -91,6 +101,14 @@ cp -a \ $PKG/usr/doc/glib-$VERSION ( cd $PKG/usr/doc/glib-$VERSION ; ln -s /usr/share/gtk-doc/html/gobject html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/l/glibc/doinst.sh-glibc b/source/l/glibc/doinst.sh-glibc index e85810f7a..ffc066e80 100644 --- a/source/l/glibc/doinst.sh-glibc +++ b/source/l/glibc/doinst.sh-glibc @@ -110,45 +110,44 @@ rm -f etc/profile.d/glibc.sh.new # In case there's no ldconfig, make the links manually: if [ ! -x /sbin/ldconfig ]; then -# linuxthreads: ( cd lib ; rm -rf libnss_nis.so.2 ) -( cd lib ; ln -sf libnss_nis-2.9.so libnss_nis.so.2 ) +( cd lib ; ln -sf libnss_nis-2.11.1.so libnss_nis.so.2 ) ( cd lib ; rm -rf libm.so.6 ) -( cd lib ; ln -sf libm-2.9.so libm.so.6 ) +( cd lib ; ln -sf libm-2.11.1.so libm.so.6 ) ( cd lib ; rm -rf libnss_files.so.2 ) -( cd lib ; ln -sf libnss_files-2.9.so libnss_files.so.2 ) +( cd lib ; ln -sf libnss_files-2.11.1.so libnss_files.so.2 ) ( cd lib ; rm -rf libresolv.so.2 ) -( cd lib ; ln -sf libresolv-2.9.so libresolv.so.2 ) +( cd lib ; ln -sf libresolv-2.11.1.so libresolv.so.2 ) ( cd lib ; rm -rf libnsl.so.1 ) -( cd lib ; ln -sf libnsl-2.9.so libnsl.so.1 ) +( cd lib ; ln -sf libnsl-2.11.1.so libnsl.so.1 ) ( cd lib ; rm -rf libutil.so.1 ) -( cd lib ; ln -sf libutil-2.9.so libutil.so.1 ) +( cd lib ; ln -sf libutil-2.11.1.so libutil.so.1 ) ( cd lib ; rm -rf libnss_compat.so.2 ) -( cd lib ; ln -sf libnss_compat-2.9.so libnss_compat.so.2 ) +( cd lib ; ln -sf libnss_compat-2.11.1.so libnss_compat.so.2 ) ( cd lib ; rm -rf libthread_db.so.1 ) ( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 ) ( cd lib ; rm -rf libnss_hesiod.so.2 ) -( cd lib ; ln -sf libnss_hesiod-2.9.so libnss_hesiod.so.2 ) +( cd lib ; ln -sf libnss_hesiod-2.11.1.so libnss_hesiod.so.2 ) ( cd lib ; rm -rf libanl.so.1 ) -( cd lib ; ln -sf libanl-2.9.so libanl.so.1 ) +( cd lib ; ln -sf libanl-2.11.1.so libanl.so.1 ) ( cd lib ; rm -rf libcrypt.so.1 ) -( cd lib ; ln -sf libcrypt-2.9.so libcrypt.so.1 ) +( cd lib ; ln -sf libcrypt-2.11.1.so libcrypt.so.1 ) ( cd lib ; rm -rf libBrokenLocale.so.1 ) -( cd lib ; ln -sf libBrokenLocale-2.9.so libBrokenLocale.so.1 ) +( cd lib ; ln -sf libBrokenLocale-2.11.1.so libBrokenLocale.so.1 ) ( cd lib ; rm -rf ld-linux.so.2 ) -( cd lib ; ln -sf ld-2.9.so ld-linux.so.2 ) +( cd lib ; ln -sf ld-2.11.1.so ld-linux.so.2 ) ( cd lib ; rm -rf libdl.so.2 ) -( cd lib ; ln -sf libdl-2.9.so libdl.so.2 ) +( cd lib ; ln -sf libdl-2.11.1.so libdl.so.2 ) ( cd lib ; rm -rf libnss_dns.so.2 ) -( cd lib ; ln -sf libnss_dns-2.9.so libnss_dns.so.2 ) +( cd lib ; ln -sf libnss_dns-2.11.1.so libnss_dns.so.2 ) ( cd lib ; rm -rf libpthread.so.0 ) -( cd lib ; ln -sf libpthread-2.9.so libpthread.so.0 ) +( cd lib ; ln -sf libpthread-2.11.1.so libpthread.so.0 ) ( cd lib ; rm -rf libnss_nisplus.so.2 ) -( cd lib ; ln -sf libnss_nisplus-2.9.so libnss_nisplus.so.2 ) +( cd lib ; ln -sf libnss_nisplus-2.11.1.so libnss_nisplus.so.2 ) ( cd lib ; rm -rf libc.so.6 ) -( cd lib ; ln -sf libc-2.9.so libc.so.6 ) +( cd lib ; ln -sf libc-2.11.1.so libc.so.6 ) ( cd lib ; rm -rf librt.so.1 ) -( cd lib ; ln -sf librt-2.9.so librt.so.1 ) +( cd lib ; ln -sf librt-2.11.1.so librt.so.1 ) fi # More links: diff --git a/source/l/glibc/doinst.sh-glibc-solibs b/source/l/glibc/doinst.sh-glibc-solibs index bfc7ad85c..a186da99c 100644 --- a/source/l/glibc/doinst.sh-glibc-solibs +++ b/source/l/glibc/doinst.sh-glibc-solibs @@ -90,43 +90,42 @@ rm -f etc/profile.d/glibc.sh.new # In case there's no ldconfig, make the links manually: if [ ! -x /sbin/ldconfig ]; then -# linuxthreads: ( cd lib ; rm -rf libnss_nis.so.2 ) -( cd lib ; ln -sf libnss_nis-2.9.so libnss_nis.so.2 ) +( cd lib ; ln -sf libnss_nis-2.11.1.so libnss_nis.so.2 ) ( cd lib ; rm -rf libm.so.6 ) -( cd lib ; ln -sf libm-2.9.so libm.so.6 ) +( cd lib ; ln -sf libm-2.11.1.so libm.so.6 ) ( cd lib ; rm -rf libnss_files.so.2 ) -( cd lib ; ln -sf libnss_files-2.9.so libnss_files.so.2 ) +( cd lib ; ln -sf libnss_files-2.11.1.so libnss_files.so.2 ) ( cd lib ; rm -rf libresolv.so.2 ) -( cd lib ; ln -sf libresolv-2.9.so libresolv.so.2 ) +( cd lib ; ln -sf libresolv-2.11.1.so libresolv.so.2 ) ( cd lib ; rm -rf libnsl.so.1 ) -( cd lib ; ln -sf libnsl-2.9.so libnsl.so.1 ) +( cd lib ; ln -sf libnsl-2.11.1.so libnsl.so.1 ) ( cd lib ; rm -rf libutil.so.1 ) -( cd lib ; ln -sf libutil-2.9.so libutil.so.1 ) +( cd lib ; ln -sf libutil-2.11.1.so libutil.so.1 ) ( cd lib ; rm -rf libnss_compat.so.2 ) -( cd lib ; ln -sf libnss_compat-2.9.so libnss_compat.so.2 ) +( cd lib ; ln -sf libnss_compat-2.11.1.so libnss_compat.so.2 ) ( cd lib ; rm -rf libthread_db.so.1 ) ( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 ) ( cd lib ; rm -rf libnss_hesiod.so.2 ) -( cd lib ; ln -sf libnss_hesiod-2.9.so libnss_hesiod.so.2 ) +( cd lib ; ln -sf libnss_hesiod-2.11.1.so libnss_hesiod.so.2 ) ( cd lib ; rm -rf libanl.so.1 ) -( cd lib ; ln -sf libanl-2.9.so libanl.so.1 ) +( cd lib ; ln -sf libanl-2.11.1.so libanl.so.1 ) ( cd lib ; rm -rf libcrypt.so.1 ) -( cd lib ; ln -sf libcrypt-2.9.so libcrypt.so.1 ) +( cd lib ; ln -sf libcrypt-2.11.1.so libcrypt.so.1 ) ( cd lib ; rm -rf libBrokenLocale.so.1 ) -( cd lib ; ln -sf libBrokenLocale-2.9.so libBrokenLocale.so.1 ) +( cd lib ; ln -sf libBrokenLocale-2.11.1.so libBrokenLocale.so.1 ) ( cd lib ; rm -rf ld-linux.so.2 ) -( cd lib ; ln -sf ld-2.9.so ld-linux.so.2 ) +( cd lib ; ln -sf ld-2.11.1.so ld-linux.so.2 ) ( cd lib ; rm -rf libdl.so.2 ) -( cd lib ; ln -sf libdl-2.9.so libdl.so.2 ) +( cd lib ; ln -sf libdl-2.11.1.so libdl.so.2 ) ( cd lib ; rm -rf libnss_dns.so.2 ) -( cd lib ; ln -sf libnss_dns-2.9.so libnss_dns.so.2 ) +( cd lib ; ln -sf libnss_dns-2.11.1.so libnss_dns.so.2 ) ( cd lib ; rm -rf libpthread.so.0 ) -( cd lib ; ln -sf libpthread-2.9.so libpthread.so.0 ) +( cd lib ; ln -sf libpthread-2.11.1.so libpthread.so.0 ) ( cd lib ; rm -rf libnss_nisplus.so.2 ) -( cd lib ; ln -sf libnss_nisplus-2.9.so libnss_nisplus.so.2 ) +( cd lib ; ln -sf libnss_nisplus-2.11.1.so libnss_nisplus.so.2 ) ( cd lib ; rm -rf libc.so.6 ) -( cd lib ; ln -sf libc-2.9.so libc.so.6 ) +( cd lib ; ln -sf libc-2.11.1.so libc.so.6 ) ( cd lib ; rm -rf librt.so.1 ) -( cd lib ; ln -sf librt-2.9.so librt.so.1 ) +( cd lib ; ln -sf librt-2.11.1.so librt.so.1 ) fi diff --git a/source/l/glibc/glibc.SlackBuild b/source/l/glibc/glibc.SlackBuild index bf49bdce5..c00d790ef 100755 --- a/source/l/glibc/glibc.SlackBuild +++ b/source/l/glibc/glibc.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,14 +22,25 @@ ## build glibc-$VERSION for Slackware - -VERSION=${VERSION:-2.9} -CHECKOUT=${CHECKOUT:--20090316} +VERSION=${VERSION:-2.11.1} +CHECKOUT=${CHECKOUT:-""} BUILD=${BUILD:-3} + +## Included in glibc now: +## glibc-libidn version +#LIBIDNVER=2.10.1 + # $ARCH may be preset, otherwise i486 compatibility with i686 binary # structuring is the Slackware default, since this is what gcc-3.2+ # requires for binary compatibility with previous releases. -ARCH=${ARCH:-x86_64} +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CVSVER=${VERSION}${CHECKOUT} @@ -44,6 +55,8 @@ CWD=$(pwd) TMP=${TMP:-/glibc-tmp-$(mcookie)} mkdir -p $TMP +NUMJOBS=${NUMJOBS:--j4} + # Sanity check on the version number in the install scripts: if ! grep -vq libutil-$VERSION}.so $CWD/doinst.sh-glibc ; then echo "FATAL: doinst.sh scripts have wrong version numbers." @@ -101,14 +114,14 @@ apply_patches() { zcat $CWD/glibc.revert.to.fix.build.breakages.diff.gz | patch -p1 --verbose || exit 1 # Update the timezone information. ( cd timezone - tar xzf $CWD/tzdata2009d.tar.gz + tar xzf $CWD/tzdata?????.tar.gz chown root:root * mv yearistype.sh yearistype chmod 644 * chmod 755 yearistype mkdir tzcode cd tzcode - tar xzf $CWD/tzcode2009d.tar.gz + tar xzf $CWD/tzcode?????.tar.gz chown -R root:root . chmod 644 * cp -a *.c *.h .. @@ -187,9 +200,14 @@ mkdir -p $PKG/var/run/nscd # Begin extract/compile: cd $TMP rm -rf glibc-$CVSVER -tar xjvf $CWD/glibc-$CVSVER.tar.bz2 +tar xvf $CWD/glibc-$CVSVER.tar.xz \ + || tar xvf $CWD/glibc-$CVSVER.tar.bz2 \ + || tar xvf $CWD/glibc-$CVSVER.tar.gz cd glibc-$CVSVER +#tar xvf $CWD/glibc-libidn-$LIBIDNVER.tar.?z* +#mv glibc-libidn-$LIBIDNVER libidn + chown -R root:root . find . -perm 666 -exec chmod 644 {} \; find . -perm 664 -exec chmod 644 {} \; @@ -232,7 +250,7 @@ CFLAGS="-g $OPTIMIZ" \ --without-cvs \ $TARGET-slackware-linux -make -j4 || exit 1 +make $NUMJOBS || make || exit 1 make install install_root=$PKG || exit 1 make localedata/install-locales install_root=$PKG || exit 1 @@ -442,7 +460,7 @@ fix_doinst mv incoming/libSegFault.so . ) # Build the package: -makepkg -l y -c n $TMP/glibc-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/glibc-$VERSION-$ARCH-$BUILD.txz # Done! echo diff --git a/source/l/gmime/gmime.SlackBuild b/source/l/gmime/gmime.SlackBuild index 6f3d0f111..b7d6bb7ca 100755 --- a/source/l/gmime/gmime.SlackBuild +++ b/source/l/gmime/gmime.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,19 @@ PKGNAM=gmime -VERSION=${VERSION:-2.2.23} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,11 +51,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -66,6 +77,7 @@ CFLAGS="$SLKCFLAGS" \ --localstatedir=/var/lib \ --sysconfdir=/etc \ --mandir=/usr/man \ + --disable-static \ --program-prefix= \ --program-suffix= \ --build=$ARCH-slackware-linux @@ -108,7 +120,6 @@ cp -a \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install -#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG diff --git a/source/l/gmp/gmp.SlackBuild b/source/l/gmp/gmp.SlackBuild index 147cabe35..8fd35296d 100755 --- a/source/l/gmp/gmp.SlackBuild +++ b/source/l/gmp/gmp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.2.4 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo gmp-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) @@ -46,7 +55,7 @@ fi cd $TMP rm -rf gmp-$VERSION -tar xvf $CWD/gmp-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/gmp-$VERSION.tar.?z* || exit 1 cd gmp-$VERSION chown -R root:root . find . \ @@ -59,6 +68,7 @@ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --infodir=/usr/info \ --with-gnu-ld \ --enable-cxx \ --enable-mpbsd \ @@ -76,9 +86,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ mkdir -p $PKG/usr/doc/gmp-$VERSION cp -a \ - AUTHORS COPYING COPYING.LIB NEWS README \ + AUTHORS COPYING* NEWS README \ $PKG/usr/doc/gmp-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild b/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild index d8855c64f..c9a76aa41 100755 --- a/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild +++ b/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.26.0 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo gnome-icon-theme-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -67,6 +77,14 @@ cp -a \ AUTHORS COPYING NEWS README TODO \ $PKG/usr/doc/gnome-icon-theme-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff b/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff index 0b93f2cf7..f8f0b2692 100644 --- a/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff +++ b/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff @@ -1,12 +1,12 @@ -diff -Nur gnome-icon-theme-2.20.0.orig/Makefile.in gnome-icon-theme-2.20.0/Makefile.in ---- gnome-icon-theme-2.20.0.orig/Makefile.in 2007-09-17 15:07:53.000000000 -0500 -+++ gnome-icon-theme-2.20.0/Makefile.in 2008-02-09 19:56:18.425736840 -0600 -@@ -218,7 +218,7 @@ - top_builddir = @top_builddir@ - top_srcdir = @top_srcdir@ - SUBDIRS = 8x8 16x16 22x22 24x24 32x32 48x48 scalable po +diff -Nur gnome-icon-theme-2.30.2.orig//Makefile.in gnome-icon-theme-2.30.2/Makefile.in +--- gnome-icon-theme-2.30.2.orig//Makefile.in 2010-04-27 09:09:59.000000000 -0500 ++++ gnome-icon-theme-2.30.2/Makefile.in 2010-04-28 10:21:56.050022564 -0500 +@@ -231,7 +231,7 @@ + theme_in_files = index.theme.in.in + theme_DATA = $(theme_in_files:.theme.in.in=.theme) + THEME_DIRS = $(shell SIZES="$(render_sizes)"; for size in $$SIZES; do for dir in `find $(srcdir)/$(SVGOUTDIR)/$$size/* -type d`; do printf "$$dir,"; done; done | sed -e "s/,$$//g") -pkgconfigdir = $(datadir)/pkgconfig +pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = gnome-icon-theme.pc - THEME_IN_FILES = index.theme.in - theme_DATA = index.theme + EXTRA_DIST = \ + gnome-icon-theme.pc.in \ diff --git a/source/l/gst-plugins-base/gst-plugins-base.SlackBuild b/source/l/gst-plugins-base/gst-plugins-base.SlackBuild index ccb118726..e6e3c84cc 100755 --- a/source/l/gst-plugins-base/gst-plugins-base.SlackBuild +++ b/source/l/gst-plugins-base/gst-plugins-base.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Michiel van Wessem <michiel@slackbuilds.org> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -24,15 +24,25 @@ # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=gst-plugins-base -VERSION=0.10.23 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=gst-plugins-base +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -46,14 +56,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -84,14 +97,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* RELEASE REQUIREMENTS \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/gst-plugins-good/gst-plugins-good.SlackBuild b/source/l/gst-plugins-good/gst-plugins-good.SlackBuild new file mode 100755 index 000000000..a5db6d876 --- /dev/null +++ b/source/l/gst-plugins-good/gst-plugins-good.SlackBuild @@ -0,0 +1,129 @@ +#!/bin/sh + +# Copyright 2008 Michiel van Wessem <michiel@slackbuilds.org> +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=gst-plugins-good +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --disable-debug \ + --disable-static \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* RELEASE REQUIREMENTS \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/gst-plugins-good/slack-desc b/source/l/gst-plugins-good/slack-desc new file mode 100644 index 000000000..7738d275b --- /dev/null +++ b/source/l/gst-plugins-good/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler---------------------------------------------| +gst-plugins-good: gst-plugins-good (good set of GStreamer plugins) +gst-plugins-good: +gst-plugins-good: GStreamer Good Plug-ins is a set of plug-ins that have good +gst-plugins-good: quality code, correct functionality, and a good license +gst-plugins-good: (LGPL for the plug-in code, LGPL or LGPL-compatible for the +gst-plugins-good: supporting library). +gst-plugins-good: +gst-plugins-good: +gst-plugins-good: +gst-plugins-good: +gst-plugins-good: diff --git a/source/l/gstreamer/gstreamer.SlackBuild b/source/l/gstreamer/gstreamer.SlackBuild index 2fcc04e71..293b90fa0 100755 --- a/source/l/gstreamer/gstreamer.SlackBuild +++ b/source/l/gstreamer/gstreamer.SlackBuild @@ -2,7 +2,7 @@ # Copyright 2008 Robby Workman, Northport, Alabama, USA # Copyright 2008 Michiel van Wessem <michiel@slackbuilds.org> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,12 +23,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=gstreamer -VERSION=0.10.23 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=gstreamer +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,19 +51,22 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -69,21 +82,21 @@ CXXFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ - --with-cachedir=/var/cache/$PRGNAM \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --disable-static \ --disable-debug \ + --disable-gst-debug \ + --with-package-name='gstreamer' \ + --with-package-origin='http://gstreamer.freedesktop.org' \ --build=$ARCH-slackware-linux # --disable-gst-debug was always used before, but now the option prevents # gstreamer (10.22) from compiling. Check again with future releases. +# Seems fine as of 0.10.26, so it's enabled again -RW make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Create the cache directory -mkdir -p $PKG/var/cache/gstreamer - find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -92,14 +105,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ ABOUT-NLS AUTHORS COPYING* INSTALL MAINTAINERS NEWS README* RELEASE TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/gtk+2/gtk+2.SlackBuild b/source/l/gtk+2/gtk+2.SlackBuild index 0c4e043a7..f60d0a555 100755 --- a/source/l/gtk+2/gtk+2.SlackBuild +++ b/source/l/gtk+2/gtk+2.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.14.7 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +VERSION=${VERSION:-$(echo gtk+-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-gtk2 @@ -40,32 +49,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG/usr cd $TMP rm -rf gtk+-$VERSION -tar xvf $CWD/gtk+-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/gtk+-$VERSION.tar.?z* || exit 1 cd gtk+-$VERSION -# There's been this long standing debate about PNG and -lz -# and this patch is the workaround. ;-) -zcat $CWD/gtk.pnglz.diff.gz | patch -p1 --verbose || exit 1 -# Fix Flash in Konquoror: -zcat $CWD/gtk.nsplugin.diff.gz | patch -p1 --verbose || exit 1 - -## Fix for x86_64 (does not hurt the other archs but note that we will start -## using /etc/gtk-2.0/$host instead of /etc/gtk-2.0/ now): - sed -i "s/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\"/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\", HOST/g" ./gtk/gtkrc.c ./gdk-pixbuf/gdk-pixbuf-io.c - sed -i 's/sysconfdir)\\"/& \\\n\t-DHOST=\\\"$(host_triplet)\\\"/g' \ - gdk-pixbuf/Makefile.am \ - gtk/Makefile.am \ - modules/input/Makefile.am - -# The original config.{guess,sub} do not work on x86_64 -cp -p /usr/share/libtool/config.{guess,sub} . - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -73,6 +68,25 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# There's been this long standing debate about PNG and -lz +# and this patch is the workaround. ;-) +zcat $CWD/gtk.pnglz.diff.gz | patch -p1 --verbose || exit 1 + +# Do not flood the console or .xsession-errors with "trouble ahead" +# warnings (most noticable when using Firefox and Flash): +zcat $CWD/gtk.xid.nowarningflood.diff.gz | patch -p1 --verbose || exit 1 + +# Use /etc/gtk-2.0/$ARCH-slackware-linux instead of /etc/gtk-2.0/ +sed -i "s/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\"/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\", HOST/g" ./gtk/gtkrc.c ./gdk-pixbuf/gdk-pixbuf-io.c +sed -i 's/sysconfdir)\\"/& \\\n\t-DHOST=\\\"$(host_triplet)\\\"/g' \ +gdk-pixbuf/Makefile.am \ +gtk/Makefile.am \ +modules/input/Makefile.am + +# Use libpng-1.4.x: +zcat $CWD/gtk.png14.diff.gz | patch -p1 --verbose || exit 1 + +# Regenerate ./configure: libtoolize --force autoreconf -vif @@ -80,7 +94,7 @@ autoreconf -vif # Our host is $ARCH-slackware-linux not $ARCH-slackware-linux-gnu: sed -i -e 's#linux|linux-gnu|#linux|linux|#' config.sub -CFLAGS="$SLKCFLAGS" \ +CFLAGS="$SLKCFLAGS -DHOST='"'"${ARCH}-slackware-linux"'"'" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ @@ -167,6 +181,14 @@ cp -a \ ln -s /usr/share/gtk-doc/html/gtk . ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # I'm almost inclined to think this stuff is obsolete but I don't know for sure. # I do know that leaving it in doesn't hurt (aside from a few wasted bytes, but # probably less than the comments here waste ;-) diff --git a/source/l/gtk+2/gtk.nsplugin.diff b/source/l/gtk+2/gtk.nsplugin.diff deleted file mode 100644 index 3e0932dec..000000000 --- a/source/l/gtk+2/gtk.nsplugin.diff +++ /dev/null @@ -1,11 +0,0 @@ -diff -Nur gtk+-2.14.6.orig/gtk/gtkclipboard.c gtk+-2.14.6/gtk/gtkclipboard.c ---- gtk+-2.14.6.orig/gtk/gtkclipboard.c 2008-12-15 12:38:44.000000000 -0600 -+++ gtk+-2.14.6/gtk/gtkclipboard.c 2008-12-16 21:33:21.079854023 -0600 -@@ -299,6 +299,7 @@ - gtk_clipboard_get_for_display (GdkDisplay *display, - GdkAtom selection) - { -+ g_return_val_if_fail (display != NULL, NULL); - g_return_val_if_fail (GDK_IS_DISPLAY (display), NULL); - g_return_val_if_fail (!display->closed, NULL); - diff --git a/source/l/gtk+2/gtk.png14.diff b/source/l/gtk+2/gtk.png14.diff new file mode 100644 index 000000000..20d709e4e --- /dev/null +++ b/source/l/gtk+2/gtk.png14.diff @@ -0,0 +1,19 @@ +--- ./configure.in.orig 2010-01-11 14:57:36.000000000 -0600 ++++ ./configure.in 2010-02-12 00:48:04.000000000 -0600 +@@ -908,12 +908,12 @@ + + dnl Test for libpng + if test x$with_libpng != xno && test -z "$LIBPNG"; then +- AC_MSG_CHECKING(for libpng12) +- if $PKG_CONFIG --exists libpng12 ; then ++ AC_MSG_CHECKING(for libpng14) ++ if $PKG_CONFIG --exists libpng14 ; then + AC_MSG_RESULT(yes) + PNG='png' +- PNG_DEP_CFLAGS_PACKAGES=libpng12 +- LIBPNG=`$PKG_CONFIG --libs libpng12` ++ PNG_DEP_CFLAGS_PACKAGES=libpng14 ++ LIBPNG=`$PKG_CONFIG --libs libpng14` + else + AC_MSG_RESULT(no) + AC_CHECK_LIB(png, png_read_info, diff --git a/source/l/gtk+2/gtk.pnglz.diff b/source/l/gtk+2/gtk.pnglz.diff index 13020c242..1f71bd841 100644 --- a/source/l/gtk+2/gtk.pnglz.diff +++ b/source/l/gtk+2/gtk.pnglz.diff @@ -1,7 +1,7 @@ -diff -Nur gtk+-2.14.6.orig/gdk-pixbuf/Makefile.in gtk+-2.14.6/gdk-pixbuf/Makefile.in ---- gtk+-2.14.6.orig/gdk-pixbuf/Makefile.in 2008-12-15 12:42:35.000000000 -0600 -+++ gtk+-2.14.6/gdk-pixbuf/Makefile.in 2008-12-16 21:36:45.393854353 -0600 -@@ -245,7 +245,7 @@ +diff -Nur gtk+-2.18.4.orig/gdk-pixbuf/Makefile.in gtk+-2.18.4/gdk-pixbuf/Makefile.in +--- gtk+-2.18.4.orig/gdk-pixbuf/Makefile.in 2009-11-30 22:08:44.000000000 -0600 ++++ gtk+-2.18.4/gdk-pixbuf/Makefile.in 2009-12-03 21:57:10.541765261 -0600 +@@ -801,7 +801,7 @@ LIBJASPER = @LIBJASPER@ LIBJPEG = @LIBJPEG@ LIBOBJS = @LIBOBJS@ diff --git a/source/l/gtk+2/gtk.xid.nowarningflood.diff b/source/l/gtk+2/gtk.xid.nowarningflood.diff new file mode 100644 index 000000000..6b8c854d8 --- /dev/null +++ b/source/l/gtk+2/gtk.xid.nowarningflood.diff @@ -0,0 +1,12 @@ +--- ./gdk/x11/gdkxid.c.orig 2009-12-18 20:54:50.000000000 -0600 ++++ ./gdk/x11/gdkxid.c 2010-02-08 14:42:50.000000000 -0600 +@@ -57,9 +57,6 @@ + display_x11->xid_ht = g_hash_table_new ((GHashFunc) gdk_xid_hash, + (GEqualFunc) gdk_xid_equal); + +- if (g_hash_table_lookup (display_x11->xid_ht, xid)) +- g_warning ("XID collision, trouble ahead"); +- + g_hash_table_insert (display_x11->xid_ht, xid, data); + } + diff --git a/source/l/hal-info/hal-info.SlackBuild b/source/l/hal-info/hal-info.SlackBuild index fa61d8bea..5f527f584 100755 --- a/source/l/hal-info/hal-info.SlackBuild +++ b/source/l/hal-info/hal-info.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh -# Copyright 2007, 2008 Robby Workman, Northport, AL, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007-2010 Robby Workman, Northport, AL, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,21 +22,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=hal-info -VERSION=${VERSION:-20090716} +PKGNAM=hal-info +VERSION=${VERSION:-20091130} ARCH=noarch BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -44,6 +44,10 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Apply a couple of patches from git +zcat $CWD/patches/quirk-LG_X110-keyboard.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/patches/quirk-acer_aspire_hotkey.patch.gz | patch -p1 --verbose || exit 1 + ./configure \ --prefix=/usr \ --sysconfdir=/etc \ @@ -52,14 +56,14 @@ find . \ make || exit 1 make install DESTDIR=$PKG || exit 1 -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* HACKING INSTALL NEWS README* \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch b/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch new file mode 100644 index 000000000..330b86999 --- /dev/null +++ b/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch @@ -0,0 +1,46 @@ +commit 1a3c7c28d028c0952404d6d45b58138849c09ff1 +Author: Ozan ÇaÄŸlayan <ozan@pardus.org.tr> +Date: Wed Dec 23 10:13:26 2009 +0200 + + Add keymap quirks for LG X110 + + The patch adds keyboard quirks for LG X110 (An MSI Wind clone) which has + the following DMI informations: + + system.hardware.primary_video.product = 10158 (0x27ae) (int) + system.hardware.primary_video.vendor = 32902 (0x8086) (int) + system.hardware.product = 'X110-L.A7M3F3' (string) + system.hardware.serial = '812MSVJ025279' (string) + system.hardware.uuid = '00000000-0000-0000-0000-002185569235' (string) + system.hardware.vendor = 'LG Electronics' (string) + system.hardware.version = 'Ver.001' (string) + + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/fdi/information/10freedesktop/30-keymap-misc.fdi b/fdi/information/10freedesktop/30-keymap-misc.fdi +index c4e527e..39d71ed 100644 +--- a/fdi/information/10freedesktop/30-keymap-misc.fdi ++++ b/fdi/information/10freedesktop/30-keymap-misc.fdi +@@ -103,6 +103,22 @@ + </match> + </match> + ++ <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" prefix="LG"> ++ <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains="X110"> ++ <append key="input.keymap.data" type="strlist">e020:mute</append> <!-- Fn-F9 Sound On/Off --> ++ <append key="input.keymap.data" type="strlist">e02e:volumedown</append> <!-- Fn-Left Volume down --> ++ <append key="input.keymap.data" type="strlist">e02f:search</append> <!-- Fn-F3 Search --> ++ <append key="input.keymap.data" type="strlist">e030:volumeup</append> <!-- Fn-Right Volume up --> ++ <append key="input.keymap.data" type="strlist">e031:battery</append> <!-- Fn-F10 Info --> ++ <append key="input.keymap.data" type="strlist">e033:suspend</append> <!-- Fn-F12 Hibernate --> ++ <append key="input.keymap.data" type="strlist">e05f:sleep</append> <!-- Fn-F4 Sleep --> ++ <append key="input.keymap.data" type="strlist">e064:f22</append> <!-- Fn-F5 Touchpad disable --> ++ <append key="input.keymap.data" type="strlist">e076:wlan</append> <!-- Fn-F6 satellite dish1 --> ++ <append key="input.keymap.data" type="strlist">e077:brightnessdown</append> <!-- Fn-Down Brightness down --> ++ <append key="input.keymap.data" type="strlist">e078:brightnessup</append> <!-- Fn-Up Brightness up --> ++ </match> ++ </match> ++ + <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" string="MEDIONNB"> + <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" prefix="A555"> + <append key="input.keymap.data" type="strlist">63:www</append> <!-- N button --> diff --git a/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch b/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch new file mode 100644 index 000000000..390fc7fe8 --- /dev/null +++ b/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch @@ -0,0 +1,25 @@ +commit 16e1c1921e089a4b53940b6b265fc72446d28254 +Author: Keng-Yu Lin <keng-yu.lin@canonical.com> +Date: Wed Sep 16 15:08:05 2009 +0800 + + Add hotkey quirk for Acer Aspire One (AO531h/AO751h) + + To prevent the brightness adjustment OSD from showing when disabling the bluetooth. + + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/fdi/information/10freedesktop/30-keymap-acer.fdi b/fdi/information/10freedesktop/30-keymap-acer.fdi +index a2cf8d8..4511bff 100644 +--- a/fdi/information/10freedesktop/30-keymap-acer.fdi ++++ b/fdi/information/10freedesktop/30-keymap-acer.fdi +@@ -61,6 +61,10 @@ + <append key="input.keymap.data" type="strlist">e012:prog2</append> + <append key="input.keymap.data" type="strlist">e059:bluetooth</append> <!-- Bluetooth (toggle) on-to-off --> + </match> ++ <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains_outof="AO751h;AO531h"> ++ <remove key="input.keymap.data" type="strlist">e059:brightnessup</remove> ++ <append key="input.keymap.data" type="strlist">e059:bluetooth</append> <!-- Bluetooth (toggle) on-to-off --> ++ </match> + </match> + </match> + </device> diff --git a/source/l/hal/doinst.sh b/source/l/hal/doinst.sh index ec123d59c..a1c86cf41 100644 --- a/source/l/hal/doinst.sh +++ b/source/l/hal/doinst.sh @@ -1,5 +1,3 @@ -#!/bin/sh - config() { NEW="$1" OLD="$(dirname $NEW)/$(basename $NEW .new)" diff --git a/source/l/hal/hal.SlackBuild b/source/l/hal/hal.SlackBuild index a797b2523..967136868 100755 --- a/source/l/hal/hal.SlackBuild +++ b/source/l/hal/hal.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Ole Andre Rodlie <olear@slackforge.net> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,34 +21,46 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=hal -VERSION=0.5.11 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-6} +PKGNAM=hal +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:--j7} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -56,43 +68,42 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Restore Xorg's Zap'ing behavior by default and make it -# clearer to the user how to edit and/or get back old behavior -zcat $CWD/patches/10-keymap.fdi-restore_zap.diff.gz | patch -p1 || exit 1 -# Hide some invalid partition types -zcat $CWD/patches/hide_more_invalid_partitions.diff.gz | patch -p1 || exit 1 -# Allow uid/gid options with ntfs-3g filesystems -zcat $CWD/patches/allow_uid_gid_ntfs.diff.gz | patch -p1 || exit 1 -# Check UDI's properly so that we don't cause dbus errors -zcat $CWD/patches/check_udi_properly.diff.gz | patch -p1 || exit 1 -# Prevent crash on newer kernels during resume operations -zcat $CWD/patches/fix_led_crash.diff.gz | patch -p1 || exit 1 -# Fix a crash when assembling md devices -zcat $CWD/patches/fix_md_crash.diff.gz | patch -p1 || exit 1 -# Fix another segfault in mdraid handling -zcat $CWD/patches/fix_segfault_in_mdraid.diff.gz | patch -p1 || exit 1 -# Strip trailing "/" characters from UDI strings to prevent dbus errors -zcat $CWD/patches/fixup_udi_strings.diff.gz | patch -p1 || exit 1 -# Ignore duplicate events (e.g. run udevadm trigger on a running system) -zcat $CWD/patches/ignore_dupe_add_events.diff.gz | patch -p1 || exit 1 -# Use direct hal connection to set the X keymap -zcat $CWD/patches/set_X_keymap_properly.diff.gz | patch -p1 || exit 1 -# Instead of dying, regenerate the fdi cache if it's zero-byte -zcat $CWD/patches/regen_fdi_cache_if_zero_size.diff.gz | patch -p1 || exit 1 -# We need to use "udevadm info" now instead of "udevinfo" -zcat $CWD/patches/use_udevadm_not_udevinfo.patch.gz | patch -p1 || exit 1 +# Restore the DontZap defaults from lore +zcat $CWD/patches/10-keymap.fdi-restore_zap.diff.gz | patch -p1 --verbose || exit 1 + +# Oops, a freebsd-specific commit wasn't :-) +zcat $CWD/patches/fix_libusb_detection.diff.gz | patch -p1 --verbose || exit 1 + +# Fix a segfault -- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=562068 +zcat $CWD/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff.gz | patch -p1 --verbose || exit 1 +# Increase PATH_HAL_MAX to 4096 to avoid crashes +# https://bugs.freedesktop.org/show_bug.cgi?id=25888 +zcat $CWD/patches/increase_HAL_PATH_MAX_to_4096.diff.gz | patch -p1 --verbose || exit 1 + +# Handle input.touchpad explicitly (needed due to kernel changes) +zcat $CWD/patches/handle_input.touchpad_explicitly.diff.gz | patch -p1 --verbose || exit 1 + +# Fix incorrect arguments to ioperm() +zcat $CWD/patches/fix_ioperm_arguments.patch.gz | patch -p1 --verbose || exit 1 + +# Fix segfaults from not calling dbus_error_init() early enough +zcat $CWD/patches/fix_segfault-dbus_error_init.patch.gz | patch -p1 --verbose || exit 1 + +autoconf CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --libexecdir=/usr/libexec \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ + --with-udev-prefix=/lib \ --disable-static \ --enable-docbook-docs \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --with-pid-file=/var/run/hald/pid \ --enable-parted \ --disable-policy-kit \ @@ -104,6 +115,10 @@ CXXFLAGS="$SLKCFLAGS" \ || exit 1 # These were merged into the 2.6.22 kernels # --enable-acpi-ibm --enable-acpi-toshiba +# Use these instead of the corresponding --disable lines for PolicyKit support +# --enable-policy-kit \ +# --enable-console-kit \ +# --enable-acl-management \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -116,30 +131,28 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -# Let's put the udev rules in the right place -mkdir -p $PKG/lib -mv $PKG/etc/udev $PKG/lib - # Install init script for hal mkdir -p $PKG/etc/rc.d zcat $CWD/rc.hald.gz > $PKG/etc/rc.d/rc.hald.new # Make HAL run by default: chmod 0755 $PKG/etc/rc.d/rc.hald.new +# /* remove everything between the C-style comments if using PK # Make the HAL access controls suitable for us # Big thanks to Richard Hughes for feedback on this :-) # First, move the one installed by the system to the docs directory -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION mv $PKG/etc/dbus-1/system.d/hal.conf \ - $PKG/usr/doc/$PRGNAM-$VERSION/hal.conf.orig + $PKG/usr/doc/$PKGNAM-$VERSION/hal.conf.orig +# end removal */ # Don't clobber an existing config file in case custom changes have been made zcat $CWD/hal.conf.gz > $PKG/etc/dbus-1/system.d/hal.conf.new # Install docs (directory was created above) cp -a \ AUTHORS COPYING* HACKING INSTALL NEWS README* \ - $PKG/usr/doc/$PRGNAM-$VERSION -( cd $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION ln -s ../../share/gtk-doc/html/libhal libhal ln -s ../../share/gtk-doc/html/libhal-storage libhal-storage ) @@ -149,5 +162,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/hal/patches/10-keymap.fdi-restore_zap.diff b/source/l/hal/patches/10-keymap.fdi-restore_zap.diff index 5958aae2b..12e21ba79 100644 --- a/source/l/hal/patches/10-keymap.fdi-restore_zap.diff +++ b/source/l/hal/patches/10-keymap.fdi-restore_zap.diff @@ -1,3 +1,8 @@ +We're going to make it clearer to users that they should NOT edit + this file (as installed to /usr/share/hal/fdi/... and also let + them know where to copy it and how to edit that copy for an + alternate keymap and such... --rworkman @ 20091211 + diff -Nur hal-0.5.11.orig/fdi/policy/10osvendor/10-keymap.fdi hal-0.5.11/fdi/policy/10osvendor/10-keymap.fdi --- hal-0.5.11.orig/fdi/policy/10osvendor/10-keymap.fdi 2008-05-07 18:21:16.000000000 -0500 +++ hal-0.5.11/fdi/policy/10osvendor/10-keymap.fdi 2009-07-21 00:06:11.779152226 -0500 diff --git a/source/l/hal/patches/allow_uid_gid_ntfs.diff b/source/l/hal/patches/allow_uid_gid_ntfs.diff deleted file mode 100644 index 0997fff8a..000000000 --- a/source/l/hal/patches/allow_uid_gid_ntfs.diff +++ /dev/null @@ -1,20 +0,0 @@ -Author: Michael Biebl <biebl@debian.org> -Date: Mon Nov 10 13:33:48 2008 +0100 - - allow uid/gid mount option for ntfs - - Allow uid/gid mount option for ntfs, as reported in - http://bugs.debian.org/427109. - -diff -Nur hal-0.5.11.orig/tools/hal-storage-mount.c hal-0.5.11/tools/hal-storage-mount.c ---- hal-0.5.11.orig/tools/hal-storage-mount.c 2008-05-07 18:24:23.000000000 -0500 -+++ hal-0.5.11/tools/hal-storage-mount.c 2009-07-16 16:13:12.544551085 -0500 -@@ -720,6 +720,8 @@ - * (since these doesn't contain uid/gid bits) - */ - if (strcmp (libhal_volume_get_fstype (volume), "vfat") != 0 && -+ strcmp (libhal_volume_get_fstype (volume), "ntfs") != 0 && -+ strcmp (libhal_volume_get_fstype (volume), "ntfs-3g") != 0 && - strcmp (libhal_volume_get_fstype (volume), "iso9660") != 0 && - strcmp (libhal_volume_get_fstype (volume), "hfs") != 0 && - strcmp (libhal_volume_get_fstype (volume), "udf") != 0) { diff --git a/source/l/hal/patches/check_udi_properly.diff b/source/l/hal/patches/check_udi_properly.diff deleted file mode 100644 index cd474abc5..000000000 --- a/source/l/hal/patches/check_udi_properly.diff +++ /dev/null @@ -1,41 +0,0 @@ -Author: Richard Hughes <richard@hughsie.com> -Date: Thu Jan 29 08:33:00 2009 +0000 - - check udi in hal-get-property - - We are not checking if a UDI is valid in hal-get-property - which means getting a horrible DBUS error if the entry - is not a valid DBUS path. - -diff --git a/tools/hal_get_property.c b/tools/hal_get_property.c -index ecaa6ce..d31261a 100644 ---- a/tools/hal_get_property.c -+++ b/tools/hal_get_property.c -@@ -84,6 +84,7 @@ main (int argc, char *argv[]) - dbus_bool_t is_hex = FALSE; - dbus_bool_t is_verbose = FALSE; - dbus_bool_t is_version = FALSE; -+ dbus_bool_t udi_exists; - char *str; - DBusError error; - -@@ -168,6 +169,19 @@ main (int argc, char *argv[]) - return 1; - } - -+ /* check UDI exists */ -+ udi_exists = libhal_device_exists (hal_ctx, udi, &error); -+ if (!udi_exists) { -+ fprintf (stderr, "error: UDI %s does not exist\n", udi); -+ return 1; -+ } -+ if (dbus_error_is_set(&error)) { -+ fprintf (stderr, "error: libhal_device_exists: %s: %s\n", error.name, error.message); -+ LIBHAL_FREE_DBUS_ERROR (&error); -+ return 1; -+ } -+ -+ /* get type */ - type = libhal_device_get_property_type (hal_ctx, udi, key, &error); - if (type == LIBHAL_PROPERTY_TYPE_INVALID) { - fprintf (stderr, "error: libhal_device_get_property_type: %s: %s\n", error.name, error.message); diff --git a/source/l/hal/patches/fix_ioperm_arguments.patch b/source/l/hal/patches/fix_ioperm_arguments.patch new file mode 100644 index 000000000..833e07566 --- /dev/null +++ b/source/l/hal/patches/fix_ioperm_arguments.patch @@ -0,0 +1,40 @@ +commit 597c1ffffd61a15a334ce42f2a569c59f0270bcb +Author: Dmitry Torokhov <dmitry.torokhov@gmail.com> +Date: Thu Feb 25 02:25:18 2010 -0800 + + Fix incorrect arguments to ioperm() call + + The second argument of ioperm() is not the last port to be accessed + but rather length of the port range [port, port + len). + + Signed-off-by: Dmitry Torokhov <dtor@mail.ru> + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/hald/linux/addons/addon-imac-backlight.c b/hald/linux/addons/addon-imac-backlight.c +index e869192..54e4ea3 100644 +--- a/hald/linux/addons/addon-imac-backlight.c ++++ b/hald/linux/addons/addon-imac-backlight.c +@@ -158,7 +158,8 @@ main (int argc, char **argv) + goto out; + } + +- if (ioperm(0xB2, 0xB3, 1) < 0) ++ /* Allow access to ports 0xB2 and 0xB3 */ ++ if (ioperm(0xB2, 2, 1) < 0) + { + HAL_ERROR (("ioperm failed (you should be root).")); + exit(1); +diff --git a/hald/linux/addons/addon-macbookpro-backlight.c b/hald/linux/addons/addon-macbookpro-backlight.c +index 2a6fef6..c1bbbac 100644 +--- a/hald/linux/addons/addon-macbookpro-backlight.c ++++ b/hald/linux/addons/addon-macbookpro-backlight.c +@@ -507,7 +507,8 @@ main (int argc, char *argv[]) + state = INREG(0x7ae4); + OUTREG(0x7ae4, state); + +- if (ioperm (0x300, 0x304, 1) < 0) { ++ /* Allow access to porta 0x300 through 0x304 */ ++ if (ioperm (0x300, 5, 1) < 0) { + HAL_ERROR (("ioperm failed (you should be root).")); + exit(1); + } diff --git a/source/l/hal/patches/fix_led_crash.diff b/source/l/hal/patches/fix_led_crash.diff deleted file mode 100644 index 3b50bbca4..000000000 --- a/source/l/hal/patches/fix_led_crash.diff +++ /dev/null @@ -1,26 +0,0 @@ -commit aec7c567419a1b8c33be1d08f962eea31a53e317 -Author: Andrey Borzenkov <arvidjaar@mail.ru> -Date: Tue Jul 14 21:34:07 2009 +0200 - - work aroud crash caused by LED device handling - - During suspend led device is removed; during resume it is recreated. - Apparently removing led device cause hald-addon- leds to exit - (thus disconnecting D-Bus connection); and sometimes next "add" event - comes too early, before hald had chance to notice missing addon. - - Adds extra check to hald_singleton_device_added() to ensure we do not - abort on disconnected D-Bus connection. - -diff -Nur hal-0.5.11.orig/hald/hald_dbus.c hal-0.5.11/hald/hald_dbus.c ---- hal-0.5.11.orig/hald/hald_dbus.c 2008-05-07 18:23:29.000000000 -0500 -+++ hal-0.5.11/hald/hald_dbus.c 2009-07-16 16:19:04.629624258 -0500 -@@ -3432,7 +3432,7 @@ - if (dbus_connection_send_with_reply (connection, - message, - &pending_call, -- /*-1*/ 8000)) { -+ /*-1*/ 8000) && pending_call) { - /*HAL_INFO (("connection=%x message=%x", connection, message));*/ - dbus_pending_call_set_notify (pending_call, - reply_from_singleton_device_changed, diff --git a/source/l/hal/patches/fix_libusb_detection.diff b/source/l/hal/patches/fix_libusb_detection.diff new file mode 100644 index 000000000..8a4637d48 --- /dev/null +++ b/source/l/hal/patches/fix_libusb_detection.diff @@ -0,0 +1,65 @@ +commit fce91df8ba7f305c624baf1f06961c040b088ecc +Author: Joe Marcus Clarke <marcus@FreeBSD.org> +Date: Mon Dec 7 19:05:27 2009 -0500 + + Fix libusb detection on Linux + + Adjust the FreeBSD libusb20 code so that it does not interfere with the + Linux libusb detection. + + Reported by: Robby Workman <rw@rlworkman.net> + +diff --git a/configure.in b/configure.in +index a8fda51..8363595 100644 +--- a/configure.in ++++ b/configure.in +@@ -479,9 +479,6 @@ if test "x$with_libpci" != xno ; then + fi + AM_CONDITIONAL([HAVE_LIBPCI], [test "x$USE_LIBPCI" = "xyes"]) + +-USE_LIBUSB20=no +-USE_LIBUSB=no +-LIBUSB20_LIBS="" + AC_ARG_WITH([backend], + AS_HELP_STRING([--with-backend=<name>], + [backend to use (linux/solaris/freebsd/dummy)]), +@@ -510,21 +507,25 @@ AM_CONDITIONAL(HALD_COMPILE_FREEBSD, [test x$HALD_BACKEND = xfreebsd], [Compilin + AM_CONDITIONAL(HALD_COMPILE_SOLARIS, [test x$HALD_BACKEND = xsolaris], [Compiling for Solaris]) + AC_SUBST(HALD_BACKEND) + if test "x$HALD_BACKEND" = "xfreebsd"; then +- AC_CHECK_LIB([usb20], [libusb20_dev_get_info], [USE_LIBUSB20=yes], [USE_LIBUSB20=no]) +-fi +-if test "x$USE_LIBUSB20" = "xno"; then +- AC_CHECK_LIB([usb], [libusb20_dev_get_info], [USE_LIBUSB=yes], [USE_LIBUSB=no]) +-fi +-AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_LIBUSB20" = "xyes"]) +-AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_LIBUSB" = "xyes"]) +-if test "x$USE_LIBUSB20" = "xyes"; then +- AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libusb20]) +- LIBUSB20_LIBS="-lusb20" +-elif test "x$USE_LIBUSB" = "xyes"; then +- AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libsub20]) +- LIBUSB20_LIBS="-lusb" ++ USE_BSDLIBUSB20=no ++ USE_BSDLIBUSB=no ++ LIBUSB20_LIBS="" ++ AC_CHECK_LIB([usb20], [libusb20_dev_get_info], [USE_BSDLIBUSB20=yes], [USE_BSDLIBUSB20=no]) ++ if test "x$USE_BSDLIBUSB20" = "xno"; then ++ AC_CHECK_LIB([usb], [libusb20_dev_get_info], [USE_BSDLIBUSB=yes], [USE_BSDLIBUSB=no]) ++ fi ++ AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_BSDLIBUSB20" = "xyes" -o "x$USE_BSDLIBUSB" = "xyes"]) ++ if test "x$USE_BSDLIBUSB20" = "xyes"; then ++ AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libusb20]) ++ LIBUSB20_LIBS="-lusb20" ++ elif test "x$USE_BSDLIBUSB" = "xyes"; then ++ AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libsub20]) ++ LIBUSB20_LIBS="-lusb" ++ fi ++ AC_SUBST(LIBUSB20_LIBS) ++else ++ AM_CONDITIONAL([HAVE_LIBUSB20], [false]) + fi +-AC_SUBST(LIBUSB20_LIBS) + + dnl DBUS API is subject to changes + AC_DEFINE_UNQUOTED(DBUS_API_SUBJECT_TO_CHANGE, [], [DBUS API is subject to change]) diff --git a/source/l/hal/patches/fix_md_crash.diff b/source/l/hal/patches/fix_md_crash.diff deleted file mode 100644 index 8a404c77f..000000000 --- a/source/l/hal/patches/fix_md_crash.diff +++ /dev/null @@ -1,45 +0,0 @@ -Backported from b35bf1fbfc000749010a27f3f35a95ddf6bb0b07 Mon Sep 17 00:00:00 2001 -From: Chris Coulson <chrisccoulson@googlemail.com> -Subject: fix crash when assembling certain MD devices - -Don't assume that the parent of a volume has storage capability; e. g. -if we are an MD partition then this is the case as we were re-parented -to the root computer device object earlier. - -FD#21603 - ---- a/hald/linux/blockdev.c 2008-05-08 01:23:41.000000000 +0200 -+++ b/hald/linux/blockdev.c 2009-06-04 12:48:31.000000000 +0200 -@@ -1392,10 +1392,15 @@ hotplug_event_begin_add_blockdev (const - hal_device_property_set_bool (d, "volume.is_mounted", FALSE); - hal_device_property_set_bool (d, "volume.is_mounted_read_only", FALSE); - hal_device_property_set_bool (d, "volume.linux.is_device_mapper", is_device_mapper); -- hal_device_property_set_bool ( -- d, "volume.is_disc", -- strcmp (hal_device_property_get_string (parent, "storage.drive_type"), "cdrom") == 0); -- -+ /* Don't assume that the parent has storage capability, eg -+ * if we are an MD partition then this is the case as we were -+ * re-parented to the root computer device object earlier. -+ */ -+ if (hal_device_has_property(parent, "storage.drive_type")) { -+ hal_device_property_set_bool (d, "volume.is_disc", strcmp (hal_device_property_get_string (parent, "storage.drive_type"), "cdrom") == 0); -+ } else { -+ hal_device_property_set_bool (d, "volume.is_disc", FALSE); -+ } - - is_physical_partition = TRUE; - if (is_fakevolume || is_device_mapper) -@@ -1404,8 +1409,10 @@ hotplug_event_begin_add_blockdev (const - hal_device_property_set_bool (d, "volume.is_partition", is_physical_partition); - - hal_device_property_set_string (d, "info.category", "volume"); -- if (strcmp(hal_device_property_get_string (parent, "storage.drive_type"), "cdrom") == 0) { -- hal_device_add_capability (d, "volume.disc"); -+ if (hal_device_has_property(parent, "storage.drive_type")) { -+ if (strcmp(hal_device_property_get_string (parent, "storage.drive_type"), "cdrom") == 0) { -+ hal_device_add_capability (d, "volume.disc"); -+ } - } - hal_device_add_capability (d, "volume"); - hal_device_add_capability (d, "block"); diff --git a/source/l/hal/patches/fix_segfault-dbus_error_init.patch b/source/l/hal/patches/fix_segfault-dbus_error_init.patch new file mode 100644 index 000000000..f01eefca0 --- /dev/null +++ b/source/l/hal/patches/fix_segfault-dbus_error_init.patch @@ -0,0 +1,179 @@ +commit baa61a879985d63f549854518ef14efd40e62e8c +Author: Peter Jones <pjones@redhat.com> +Date: Wed Feb 24 11:19:28 2010 -0500 + + Make sure dbus_error_init() is called before LIBHAL_FREE_DBUS_ERROR() + + If dbus_error_init() is not called before LIBHAL_FREE_DBUS_ERROR() is + called on that error, then it is uninitialized and may segfault. This + means that dbus_error_init() must be called before any "goto out" if + "out:" calls LIBHAL_FREE_DBUS_ERROR(). + + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/hald/linux/probing/probe-hiddev.c b/hald/linux/probing/probe-hiddev.c +index 45d2084..bffc040 100644 +--- a/hald/linux/probing/probe-hiddev.c ++++ b/hald/linux/probing/probe-hiddev.c +@@ -57,11 +57,12 @@ main (int argc, char *argv[]) + /* assume failure */ + ret = 1; + ++ dbus_error_init (&error); ++ + udi = getenv ("UDI"); + if (udi == NULL) + goto out; + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + +diff --git a/hald/linux/probing/probe-ieee1394-unit.c b/hald/linux/probing/probe-ieee1394-unit.c +index 70b0f86..aaa92e2 100644 +--- a/hald/linux/probing/probe-ieee1394-unit.c ++++ b/hald/linux/probing/probe-ieee1394-unit.c +@@ -388,6 +388,8 @@ int main (int argc, char *argv[]) + + setup_logger (); + ++ dbus_error_init (&error); ++ + udi = getenv ("UDI"); + if (udi == NULL) + goto out; +@@ -396,7 +398,6 @@ int main (int argc, char *argv[]) + if (ieee1394_udi == NULL) + goto out; + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + +diff --git a/hald/linux/probing/probe-net-bluetooth.c b/hald/linux/probing/probe-net-bluetooth.c +index 0b1b912..e911eea 100644 +--- a/hald/linux/probing/probe-net-bluetooth.c ++++ b/hald/linux/probing/probe-net-bluetooth.c +@@ -141,6 +141,8 @@ main (int argc, char *argv[]) + DBusMessage *reply = NULL; + DBusError error; + ++ dbus_error_init (&error); ++ + udi = getenv ("UDI"); + if (udi == NULL) + goto out; +@@ -151,8 +153,6 @@ main (int argc, char *argv[]) + + HAL_INFO (("Investigating '%s'", iface)); + +- dbus_error_init (&error); +- + if ((conn = dbus_bus_get (DBUS_BUS_SYSTEM, &error)) == NULL) + goto out; + +diff --git a/hald/linux/probing/probe-printer.c b/hald/linux/probing/probe-printer.c +index 91ed7bc..7c6d1c6 100644 +--- a/hald/linux/probing/probe-printer.c ++++ b/hald/linux/probing/probe-printer.c +@@ -66,6 +66,8 @@ main (int argc, char *argv[]) + ret = 1; + + setup_logger (); ++ ++ dbus_error_init (&error); + + udi = getenv ("UDI"); + if (udi == NULL) { +@@ -73,7 +75,6 @@ main (int argc, char *argv[]) + goto out; + } + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) { + HAL_ERROR (("ctx init failed")); + goto out; +diff --git a/hald/linux/probing/probe-smbios.c b/hald/linux/probing/probe-smbios.c +index 0bc9689..15c0d4f 100644 +--- a/hald/linux/probing/probe-smbios.c ++++ b/hald/linux/probing/probe-smbios.c +@@ -129,6 +129,8 @@ main (int argc, char *argv[]) + ret = 1; + + setup_logger (); ++ ++ dbus_error_init (&error); + + udi = getenv ("UDI"); + if (udi == NULL) { +@@ -136,7 +138,6 @@ main (int argc, char *argv[]) + goto out; + } + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) { + HAL_ERROR (("ctx init failed")); + goto out; +diff --git a/hald/linux/probing/probe-storage.c b/hald/linux/probing/probe-storage.c +index 824a82e..dd524ca 100644 +--- a/hald/linux/probing/probe-storage.c ++++ b/hald/linux/probing/probe-storage.c +@@ -109,6 +109,8 @@ main (int argc, char *argv[]) + /* assume failure */ + ret = 1; + ++ dbus_error_init (&error); ++ + if ((udi = getenv ("UDI")) == NULL) + goto out; + if ((device_file = getenv ("HAL_PROP_BLOCK_DEVICE")) == NULL) +@@ -127,7 +129,6 @@ main (int argc, char *argv[]) + else + only_check_for_fs = FALSE; + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + +diff --git a/hald/linux/probing/probe-video4linux.c b/hald/linux/probing/probe-video4linux.c +index cf913c0..7bc13e8 100644 +--- a/hald/linux/probing/probe-video4linux.c ++++ b/hald/linux/probing/probe-video4linux.c +@@ -58,6 +58,8 @@ main (int argc, char *argv[]) + + setup_logger (); + ++ dbus_error_init (&error); ++ + device_file = getenv ("HAL_PROP_VIDEO4LINUX_DEVICE"); + if (device_file == NULL) + goto out; +@@ -66,7 +68,6 @@ main (int argc, char *argv[]) + if (udi == NULL) + goto out; + +- dbus_error_init (&error); + ctx = libhal_ctx_init_direct (&error); + if (ctx == NULL) + goto out; +diff --git a/hald/linux/probing/probe-volume.c b/hald/linux/probing/probe-volume.c +index 0de1b91..7268fff 100644 +--- a/hald/linux/probing/probe-volume.c ++++ b/hald/linux/probing/probe-volume.c +@@ -318,6 +318,8 @@ main (int argc, char *argv[]) + /* assume failure */ + ret = 1; + ++ dbus_error_init (&error); ++ + if ((udi = getenv ("UDI")) == NULL) + goto out; + if ((device_file = getenv ("HAL_PROP_BLOCK_DEVICE")) == NULL) +@@ -346,7 +348,6 @@ main (int argc, char *argv[]) + + fsusage = getenv ("HAL_PROP_VOLUME_FSUSAGE"); + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + diff --git a/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff b/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff new file mode 100644 index 000000000..b5bfdec65 --- /dev/null +++ b/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff @@ -0,0 +1,51 @@ +commit dcb2829b8eff61463b0869614ddb07b1c86cecaa +Author: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> +Date: Wed Dec 30 12:42:52 2009 +0100 + + linux/probe-input: don't use error prio init + + it may happen in the out: case that LIBHAL_FREE_DBUS_ERROR (&error) is + called before the error structure is initialized via + dbus_error_init (&error). This could lead to a segfault during startup + as seen in dmesg: + + |Intel AES-NI instructions are not detected. + |padlock: VIA PadLock not detected. + |hald-probe-inpu[1793]: segfault at 2 ip 00007f656fb68969 sp 00007fff39eeb950 error 4 in libc-2.10.2.so[7f656faf3000+14a000] + |hald-probe-inpu[1796]: segfault at 2 ip 00007fa2c3293969 sp 00007fffd92a5dd0 error 4 in libc-2.10.2.so[7fa2c321e000+14a000] + |hald-probe-inpu[1797]: segfault at 2 ip 00007f1d08ba2969 sp 00007fff34244e30 error 4 in libc-2.10.2.so[7f1d08b2d000+14a000] + |hald-probe-inpu[1799]: segfault at 2 ip 00007f35c0e3d969 sp 00007fffe5ec7ee0 error 4 in libc-2.10.2.so[7f35c0dc8000+14a000] + |hald-probe-inpu[1800]: segfault at 2 ip 00007f931c556969 sp 00007fffe1825b60 error 4 in libc-2.10.2.so[7f931c4e1000+14a000] + |hald-probe-inpu[1801]: segfault at 2 ip 00007f5156d9a969 sp 00007fff4e620af0 error 4 in libc-2.10.2.so[7f5156d25000+14a000] + |RPC: Registered udp transport module. + |RPC: Registered tcp transport module. + + What I run into seems to be reported as Debian #562068 [0]. This patch + makes the segfault go away on my machine. + + [0] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=562068 + + Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + + +diff --git a/hald/linux/probing/probe-input.c b/hald/linux/probing/probe-input.c +index 94e9929..cad47d3 100644 +--- a/hald/linux/probing/probe-input.c ++++ b/hald/linux/probing/probe-input.c +@@ -70,6 +70,7 @@ main (int argc, char *argv[]) + fd = -1; + + setup_logger (); ++ dbus_error_init (&error); + + button_type = getenv ("HAL_PROP_BUTTON_TYPE"); + if (button_type == NULL) +@@ -96,7 +97,6 @@ main (int argc, char *argv[]) + if (udi == NULL) + goto out; + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + diff --git a/source/l/hal/patches/fix_segfault_in_mdraid.diff b/source/l/hal/patches/fix_segfault_in_mdraid.diff deleted file mode 100644 index 88e5eaf63..000000000 --- a/source/l/hal/patches/fix_segfault_in_mdraid.diff +++ /dev/null @@ -1,36 +0,0 @@ -Author: Martin Poole <mpoole@redhat.com> -Date: Wed Jul 29 14:20:45 2009 +0100 - - Fix a segfault in the mdraid code -- see rh#507782 for more info - - Signed-off-by: Richard Hughes <richard@hughsie.com> - -diff -Nur hal-0.5.11.orig/hald/linux/blockdev.c hal-0.5.11/hald/linux/blockdev.c ---- hal-0.5.11.orig/hald/linux/blockdev.c 2008-05-07 18:23:41.000000000 -0500 -+++ hal-0.5.11/hald/linux/blockdev.c 2009-07-30 16:22:40.624837902 -0500 -@@ -851,7 +851,7 @@ - } - - --void -+ - hotplug_event_begin_add_blockdev (const gchar *sysfs_path, const gchar *device_file, gboolean is_partition, - HalDevice *parent, void *end_token) - { -@@ -865,6 +865,7 @@ - gboolean is_device_mapper; - gboolean is_md_device; - int md_number; -+ char tc; - - is_device_mapper = FALSE; - is_fakevolume = FALSE; -@@ -882,7 +883,7 @@ - HAL_INFO (("Handling %s as fakevolume - sysfs_path_real=%s", device_file, sysfs_path_real)); - is_fakevolume = TRUE; - sysfs_path_real = hal_util_get_parent_path (sysfs_path); -- } else if (sscanf (hal_util_get_last_element (sysfs_path), "md%d", &md_number) == 1) { -+ } else if (sscanf (hal_util_get_last_element (sysfs_path), "md%d%c", &md_number, &tc) == 1) { - HAL_INFO (("Handling %s as MD device", device_file)); - is_md_device = TRUE; - sysfs_path_real = g_strdup (sysfs_path); diff --git a/source/l/hal/patches/fixup_udi_strings.diff b/source/l/hal/patches/fixup_udi_strings.diff deleted file mode 100644 index 03549ec1d..000000000 --- a/source/l/hal/patches/fixup_udi_strings.diff +++ /dev/null @@ -1,69 +0,0 @@ -Author: Danny Kukawka <danny.kukawka@web.de> -Date: Mon Oct 13 12:55:48 2008 +0200 - - fix udi: replace '/' in the last part of the udi - - Fixed udi handling. DBus forbids a '/' after the base path - (in case of HAL: '/org/freedesktop/Hal/devices/) of a DBus - path. Replace all not allowed chars in the last part of the - UDI (everything but _a-zA-Z0-9) with a '_'. - - This fixes also fd.o#16040. - -diff --git a/hald/hald.c b/hald/hald.c -index a28d22e..051b33b 100644 ---- a/hald/hald.c -+++ b/hald/hald.c -@@ -265,6 +265,8 @@ hald_compute_udi (gchar *dst, gsize dstsize, const gchar *format, ...) - hal_util_compute_udi_valist (hald_get_gdl (), dst, dstsize, format, args); - va_end (args); - -+ hal_util_validate_udi (dst, dstsize); -+ - if (hal_device_store_find (hald_get_gdl (), dst) == NULL && - hal_device_store_find (hald_get_tdl (), dst) == NULL) - goto out; -diff --git a/hald/util.c b/hald/util.c -index 901e64f..81060e4 100644 ---- a/hald/util.c -+++ b/hald/util.c -@@ -422,6 +422,26 @@ hal_util_compute_udi (HalDeviceStore *store, gchar *dst, gsize dstsize, const gc - va_end (args); - } - -+void -+hal_util_validate_udi (gchar *udi, gsize size) { -+ -+ char end[size]; -+ -+ if (sscanf (udi, "/org/freedesktop/Hal/devices/%s", end) == 1) { -+ if (strstr(end, "/") != NULL) { -+ HAL_DEBUG (("UDI end contains invalid char '/': '%s'", udi)); -+ -+ g_strcanon (end, "_" -+ "abcdefghijklmnopqrstuvwxyz" -+ "ABCDEFGHIJKLMNOPQRSTUVWXYZ" -+ "1234567890", '_'); -+ g_snprintf (udi, size, "/org/freedesktop/Hal/devices/%s", end); -+ -+ HAL_DEBUG (("Fixed UDI, replaced '/', new UDI: %s", udi)); -+ } -+ } -+} -+ - - gboolean - hal_util_path_ascend (gchar *path) -diff --git a/hald/util.h b/hald/util.h -index 510c36c..5377e35 100644 ---- a/hald/util.h -+++ b/hald/util.h -@@ -70,6 +70,8 @@ void hal_util_compute_udi_valist (HalDeviceStore *store, gchar *dst, gsize dstsi - - void hal_util_compute_udi (HalDeviceStore *store, gchar *dst, gsize dstsize, const gchar *format, ...); - -+void hal_util_validate_udi (gchar *udi, gsize size); -+ - gboolean hal_util_path_ascend (gchar *path); - - void hal_util_grep_discard_existing_data (void); diff --git a/source/l/hal/patches/handle_input.touchpad_explicitly.diff b/source/l/hal/patches/handle_input.touchpad_explicitly.diff new file mode 100644 index 000000000..b1231d6de --- /dev/null +++ b/source/l/hal/patches/handle_input.touchpad_explicitly.diff @@ -0,0 +1,75 @@ +commit 6dccf8e3ad181e8f56b1d2a994ec50a1953a1c2d +Author: Michael Witten <mfwitten@gmail.com> +Date: Tue Jan 5 18:53:17 2010 -0600 + + Policy: handle `input.touchpad' explicitly + + This commit essentially duplicates the policy for: + + <match key="info.capabilities" contains="input.mouse"> + + and then changes `input.mouse' to `input.touchpad'. This + is necessary because in Linus Torvalds's Linux repo: + + git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + + the following commit: + + commit 7105d2ea73e1391b681d0e1212c42f561c64d429 + Author: Dmitry Torokhov <dmitry.torokhov@gmail.com> + Date: Fri Dec 11 23:54:54 2009 -0800 + + Input: ALPS - do not set REL_X/REL_Y capabilities on the touchpad + + Relative events are only reported via secondary device therefore device + associated with the touchpad should not advertise these capabilities. + + Signed-off-by: Dmitry Torokhov <dtor@mail.ru> + + so that HAL no longer adds: + + input.mouse + + to an ALPS touchpad's: + + info.capabilities + + so that HAL no longer marks the ALPS touchpad with: + + input.x11_driver = 'evdev' + + because the policy file: + + fdi/policy/10osvendor/10-x11-input.fdi + + doesn't define the policy for: + + <match key="info.capabilities" contains="input.touchpad"> + + which was previous unnecessary because everything used to + be caught by the policy for: + + <match key="info.capabilities" contains="input.mouse"> + + Signed-off-by: Michael Witten <mfwitten@gmail.com> + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/fdi/policy/10osvendor/10-x11-input.fdi b/fdi/policy/10osvendor/10-x11-input.fdi +index cff8fc5..8bbe263 100644 +--- a/fdi/policy/10osvendor/10-x11-input.fdi ++++ b/fdi/policy/10osvendor/10-x11-input.fdi +@@ -16,6 +16,14 @@ + </match> + </match> + ++ <match key="info.capabilities" contains="input.touchpad"> ++ <merge key="input.x11_driver" type="string">mouse</merge> ++ <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" ++ string="Linux"> ++ <merge key="input.x11_driver" type="string">evdev</merge> ++ </match> ++ </match> ++ + <match key="info.capabilities" contains="input.tablet"> + <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" + string="Linux"> diff --git a/source/l/hal/patches/hide_more_invalid_partitions.diff b/source/l/hal/patches/hide_more_invalid_partitions.diff deleted file mode 100644 index a4437d29a..000000000 --- a/source/l/hal/patches/hide_more_invalid_partitions.diff +++ /dev/null @@ -1,66 +0,0 @@ -Author: Danny Kukawka <danny.kukawka@web.de> -Date: Sat Jul 18 11:18:53 2009 +0200 - - hide more MBR, bootstrap and other partitions from desktop - - Hide more MBR, bootstrap and other partitions from desktop. - Info taken from DeviceKit-disk/udev. - -Author: Frederic Crozat <fcrozat@mandriva.com> -Date: Fri Jul 24 15:11:41 2009 +0200 - - hide Windows recovery partitions on pre-installed Futjisu laptops - - Hide Windows recovery partitions on pre-installed Futjisu laptops. - -diff -Nur hal-0.5.11.orig/fdi/policy/10osvendor/20-storage-methods.fdi hal-0.5.11/fdi/policy/10osvendor/20-storage-methods.fdi ---- hal-0.5.11.orig/fdi/policy/10osvendor/20-storage-methods.fdi 2008-05-07 18:21:16.000000000 -0500 -+++ hal-0.5.11/fdi/policy/10osvendor/20-storage-methods.fdi 2009-07-30 16:16:49.822172103 -0500 -@@ -130,6 +130,10 @@ - <match key="volume.label" string="DellRestore"> - <merge key="volume.ignore" type="bool">true</merge> - </match> -+ <!-- Fujitsu ships laptops with a recovery partitions --> -+ <match key="volume.label" string="WinRE"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> - </match> - - <!-- ASUS ships some desktop with a recovery partition --> -@@ -146,6 +150,11 @@ - <merge key="volume.ignore" type="bool">true</merge> - </match> - </match> -+ <match key="volume.partition.scheme" string="apm"> -+ <match key="volume.partition.type" string_outof="Apple_Bootstrap"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> -+ </match> - - <!-- EFI firmware partitions --> - <match key="volume.fstype" string="vfat"> -@@ -154,6 +163,24 @@ - </match> - </match> - -+ <!-- ignore the following MBR partition types (EFI, hidden, etc.) -+ see http://www.win.tue.nl/~aeb/partitions/partition_types-1.html -+ --> -+ <match key="volume.partition.scheme" string="mbr"> -+ <match key="volume.partition.type" string_outof="0x00;0x11;0x14;0x16;0x17;0x1b;0x1c;0x1e;0x27;0x3d;0x84;0x8d;0x90;0x91;0x92;0x93;0x97;0x98;0x9a;0x9b;0xbb;0xc2;0xc3;0xdd;0xef"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> -+ </match> -+ -+ <!-- special GUID-identified partition types -+ see http://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs -+ --> -+ <match key="volume.partition.scheme" string="gpt"> -+ <match key="volume.partition.type" string_outof="C12A7328-F81F-11D2-BA4B-00A0C93EC93B;21686148-6449-6E6F-744E-656564454649"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> -+ </match> -+ - <append key="info.interfaces" type="strlist">org.freedesktop.Hal.Device.Volume</append> - - <append key="org.freedesktop.Hal.Device.Volume.method_names" type="strlist">Mount</append> diff --git a/source/l/hal/patches/ignore_dupe_add_events.diff b/source/l/hal/patches/ignore_dupe_add_events.diff deleted file mode 100644 index 0056d8f96..000000000 --- a/source/l/hal/patches/ignore_dupe_add_events.diff +++ /dev/null @@ -1,40 +0,0 @@ -Author: Danny Kukawka <danny.kukawka@web.de> -Date: Wed Mar 18 17:30:53 2009 +0100 - - ignore ADD events if there is already a device with same sysfs_path - - Ignore ADD events if there is already a device with the same - syfs_path available in the GDL or TDL. This should prevent - problems getting duplicated devices from calling 'udevadm trigger' - (fd.o#18861) or from some other rare cases (see: - http://lists.freedesktop.org/archives/hal/2009-February/012954.html). - - TODO: Check if it make sense to call a refresh for the already - existing device instead of ignoring the event completely. - -diff -Nur hal-0.5.11.orig/hald/linux/device.c hal-0.5.11/hald/linux/device.c ---- hal-0.5.11.orig/hald/linux/device.c 2008-05-07 18:23:42.000000000 -0500 -+++ hal-0.5.11/hald/linux/device.c 2009-07-16 16:21:36.619979288 -0500 -@@ -4423,11 +4423,22 @@ - handler = dev_handlers[i]; - if (strcmp (handler->subsystem, subsystem) == 0) { - HalDevice *d; -+ HalDevice *check; - - if (strcmp (subsystem, "scsi") == 0) - if (missing_scsi_host (sysfs_path, (HotplugEvent *)end_token, HOTPLUG_ACTION_ADD)) - goto out; - -+ /* check if there is already a device with this sysfs_path in the system */ -+ if ((check = hal_device_store_match_key_value_string (hald_get_gdl (), "linux.sysfs_path", sysfs_path)) != NULL || -+ (check = hal_device_store_match_key_value_string (hald_get_tdl (), "linux.sysfs_path", sysfs_path)) != NULL) { -+ HAL_WARNING(("Have already a device with sysfs_path='%s' and udi='%s'. Ignore new add event for now.", -+ sysfs_path, hal_device_get_udi(check))); -+ /* maybe we should do a refresh on the found device ??? */ -+ hotplug_event_end (end_token); -+ goto out; -+ } -+ - /* attempt to add the device */ - d = handler->add (sysfs_path, device_file, parent_dev, parent_path); - if (d == NULL) { diff --git a/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff b/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff new file mode 100644 index 000000000..b4c770aee --- /dev/null +++ b/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff @@ -0,0 +1,30 @@ +commit a2c3dd5a04d79265772c09c4280606d5c2ed72c6 +Author: Martin Pitt <martin.pitt@ubuntu.com> +Date: Mon Jan 4 16:56:13 2010 +0100 + + Bump HAL_PATH_MAX to 4096 + + Some bits in the code use realpath() with destination paths of size + HAL_PATH_MAX. This potentially breaks on systems where PATH_MAX is bigger than + HAL_PATH_MAX (which was 512 until now). + + Since we can't use PATH_MAX directly (due to platforms like GNU/Hurd, which + apparently don't have it), just bump HAL_PATH_MAX to 4096 (as PATH_MAX is on + Linux), to avoid potential buffer overflows and also fix hal on Linux when + enabling FORTIFY in gcc. + + https://bugs.freedesktop.org/show_bug.cgi?id=25888 + +diff --git a/hald/util.h b/hald/util.h +index c2a1584..7883333 100644 +--- a/hald/util.h ++++ b/hald/util.h +@@ -38,7 +38,7 @@ + #endif + + #define HAL_NAME_MAX 256 +-#define HAL_PATH_MAX 512 ++#define HAL_PATH_MAX 4096 + + gboolean hal_util_remove_trailing_slash (gchar *path); + diff --git a/source/l/hal/patches/regen_fdi_cache_if_zero_size.diff b/source/l/hal/patches/regen_fdi_cache_if_zero_size.diff deleted file mode 100644 index ab3987488..000000000 --- a/source/l/hal/patches/regen_fdi_cache_if_zero_size.diff +++ /dev/null @@ -1,24 +0,0 @@ -Author: Richard Hughes <richard@hughsie.com> -Date: Thu Mar 5 09:40:10 2009 +0000 - - regenerate cache if it's zero sized - - Sometimes when systems go a bit haywire, the cache file is - written out as a zero byte file. We're still debugging this, - but in the case of a zero byte cache, just regenerate it anyway - -diff --git a/hald/mmap_cache.c b/hald/mmap_cache.c -index 6125cf0..cc1ffa5 100644 ---- a/hald/mmap_cache.c -+++ b/hald/mmap_cache.c -@@ -265,6 +265,10 @@ di_cache_coherency_check (gboolean setup_watches) - HAL_INFO(("Cache needs update")); - regen_cache(); - did_regen = TRUE; -+ } else if (st.st_size == 0) { -+ HAL_INFO(("Cache zero size, so regenerating")); -+ regen_cache(); -+ did_regen = TRUE; - } - } else { - regen_cache(); diff --git a/source/l/hal/patches/set_X_keymap_properly.diff b/source/l/hal/patches/set_X_keymap_properly.diff deleted file mode 100644 index 933bcfa3f..000000000 --- a/source/l/hal/patches/set_X_keymap_properly.diff +++ /dev/null @@ -1,96 +0,0 @@ -diff --git a/tools/hal_set_property.c b/tools/hal_set_property.c -index a99b059..3ab38bb 100644 ---- a/tools/hal_set_property.c -+++ b/tools/hal_set_property.c -@@ -66,7 +66,7 @@ usage (int argc, char *argv[]) - " (--int <value> | --string <value> | --bool <value> |\n" - " --strlist-pre <value> | --strlist-post <value> |\n" - " --strlist-rem <value> | --double <value> | --remove)\n" -- " [--help] [--version]\n"); -+ " [--direct] [--help] [--version]\n"); - fprintf (stderr, - "\n" " --udi Unique Device Id\n" - " --key Key of the property to set\n" -@@ -81,6 +81,7 @@ usage (int argc, char *argv[]) - " --strlist-post Append a string to a list\n" - " --strlist-rem Remove a string from a list\n" - " --remove Indicates that the property should be removed\n" -+ " --direct Use direct HAL connection\n" - " --version Show version and exit\n" - " --help Show this information and exit\n" - "\n" -@@ -114,6 +115,7 @@ main (int argc, char *argv[]) - dbus_bool_t is_version = FALSE; - int type = PROP_INVALID; - DBusError error; -+ dbus_bool_t direct = FALSE; - - if (argc <= 1) { - usage (argc, argv); -@@ -135,6 +137,7 @@ main (int argc, char *argv[]) - {"strlist-pre", 1, NULL, 0}, - {"strlist-post", 1, NULL, 0}, - {"strlist-rem", 1, NULL, 0}, -+ {"direct", 0, NULL, 0}, - {"remove", 0, NULL, 0}, - {"version", 0, NULL, 0}, - {"help", 0, NULL, 0}, -@@ -188,6 +191,8 @@ main (int argc, char *argv[]) - type = PROP_STRLIST_REM; - } else if (strcmp (opt, "remove") == 0) { - remove = TRUE; -+ } else if (strcmp (opt, "direct") == 0) { -+ direct = TRUE; - } else if (strcmp (opt, "udi") == 0) { - udi = strdup (optarg); - } else if (strcmp (opt, "version") == 0) { -@@ -215,24 +220,32 @@ main (int argc, char *argv[]) - - fprintf (stderr, "\n"); - -- dbus_error_init (&error); -- if ((hal_ctx = libhal_ctx_new ()) == NULL) { -- fprintf (stderr, "error: libhal_ctx_new\n"); -- return 1; -- } -- if (!libhal_ctx_set_dbus_connection (hal_ctx, dbus_bus_get (DBUS_BUS_SYSTEM, &error))) { -- fprintf (stderr, "error: libhal_ctx_set_dbus_connection: %s: %s\n", error.name, error.message); -- LIBHAL_FREE_DBUS_ERROR (&error); -- return 1; -- } -- if (!libhal_ctx_init (hal_ctx, &error)) { -- if (dbus_error_is_set(&error)) { -- fprintf (stderr, "error: libhal_ctx_init: %s: %s\n", error.name, error.message); -- dbus_error_free (&error); -+ dbus_error_init (&error); -+ if (direct) { -+ if ((hal_ctx = libhal_ctx_init_direct (&error)) == NULL) { -+ fprintf (stderr, "error: libhal_ctx_init_direct\n"); -+ LIBHAL_FREE_DBUS_ERROR (&error); -+ return 1; -+ } -+ } else { -+ if ((hal_ctx = libhal_ctx_new ()) == NULL) { -+ fprintf (stderr, "error: libhal_ctx_new\n"); -+ return 1; -+ } -+ if (!libhal_ctx_set_dbus_connection (hal_ctx, dbus_bus_get (DBUS_BUS_SYSTEM, &error))) { -+ fprintf (stderr, "error: libhal_ctx_set_dbus_connection: %s: %s\n", error.name, error.message); -+ LIBHAL_FREE_DBUS_ERROR (&error); -+ return 1; -+ } -+ if (!libhal_ctx_init (hal_ctx, &error)) { -+ if (dbus_error_is_set(&error)) { -+ fprintf (stderr, "error: libhal_ctx_init: %s: %s\n", error.name, error.message); -+ dbus_error_free (&error); -+ } -+ fprintf (stderr, "Could not initialise connection to hald.\n" -+ "Normally this means the HAL daemon (hald) is not running or not ready.\n"); -+ return 1; - } -- fprintf (stderr, "Could not initialise connection to hald.\n" -- "Normally this means the HAL daemon (hald) is not running or not ready.\n"); -- return 1; - } - - if (remove) { diff --git a/source/l/hal/patches/use_udevadm_not_udevinfo.patch b/source/l/hal/patches/use_udevadm_not_udevinfo.patch deleted file mode 100644 index 09f709e0b..000000000 --- a/source/l/hal/patches/use_udevadm_not_udevinfo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Danny Kukawka <danny.kukawka@web.de> -Date: Wed, 27 Aug 2008 19:24:33 +0000 (+0200) -Subject: use udevadm instead of (deprecated) udevinfo -X-Git-Url: http://gitweb.freedesktop.org/?p=hal.git;a=commitdiff;h=f6af40c1e7ea54e6 - -use udevadm instead of (deprecated) udevinfo - -Use udevadm instead of (deprecated) udevinfo. Adapted/fixed version -of a patch contributed by Lucas Hazel <lucas@die.net.au> via HAL ML. - -diff -Nur hal-0.5.11.orig/hald/linux/blockdev.c hal-0.5.11/hald/linux/blockdev.c ---- hal-0.5.11.orig/hald/linux/blockdev.c 2008-05-07 18:23:41.000000000 -0500 -+++ hal-0.5.11/hald/linux/blockdev.c 2009-07-16 16:16:58.051983413 -0500 -@@ -1750,7 +1750,7 @@ - char *ret; - char *u_stdout; - int u_exit_status; -- const char *argv[] = {"/usr/bin/udevinfo", "--root", "--query", "name", "--path", NULL, NULL}; -+ const char *argv[] = {"/sbin/udevadm", "info", "--root", "--query", "name", "--path", NULL, NULL}; - GError *g_error; - - ret = NULL; -diff -Nur hal-0.5.11.orig/hald/linux/coldplug.c hal-0.5.11/hald/linux/coldplug.c ---- hal-0.5.11.orig/hald/linux/coldplug.c 2008-05-07 18:23:32.000000000 -0500 -+++ hal-0.5.11/hald/linux/coldplug.c 2009-07-16 16:16:58.051983413 -0500 -@@ -149,8 +149,8 @@ - static gboolean - hal_util_init_sysfs_to_udev_map (void) - { -- char *udevdb_export_argv[] = { "/usr/bin/udevinfo", "-e", NULL }; -- char *udevroot_argv[] = { "/usr/bin/udevinfo", "-r", NULL }; -+ char *udevdb_export_argv[] = { "/sbin/udevadm", "info", "-e", NULL }; -+ char *udevroot_argv[] = { "/sbin/udevadm", "info", "-r", NULL }; - int udevinfo_exitcode; - UdevInfo *info = NULL; - char *p; diff --git a/source/l/hal/slack-desc b/source/l/hal/slack-desc index c01fd8a68..0145a5df4 100644 --- a/source/l/hal/slack-desc +++ b/source/l/hal/slack-desc @@ -12,8 +12,8 @@ hal: HAL is a piece of software that provides a view of the various hal: hardware attached to a system. HAL keeps detailed metadata for each hal: piece of hardware and provides hooks so that system and desktop hal: software can react to changes in the hardware configuration (such as -hal: the insertion of a DVD, or a USB flash memory stick). Users in the -hal: "plugdev" or "cdrom" group will be able to use such devices on the -hal: desktop without the need to mount/umount them manually. +hal: the insertion of a DVD, or a USB flash memory stick). hal: hal: For more info, see: http://hal.freedesktop.org/ +hal: +hal: diff --git a/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild b/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild index 7d887d684..0a5aecaac 100755 --- a/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild +++ b/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,9 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.10} +VERSION=${VERSION:-0.12} ARCH=noarch -BUILD=${BUILD:-5} - +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -51,13 +50,13 @@ make install DESTDIR=$PKG || exit 1 mkdir -p $PKG/var/log/setup cat $CWD/setup.08.gtk-update-icon-cache > $PKG/var/log/setup/setup.08.gtk-update-icon-cache -chmod 755 $PKG/var/log/setup/setup.08.gtk-update-icon-cache +chmod 0755 $PKG/var/log/setup/setup.08.gtk-update-icon-cache mkdir -p $PKG/usr/doc/hicolor-icon-theme-$VERSION cp -a \ COPYING README \ $PKG/usr/doc/hicolor-icon-theme-$VERSION -chmod 644 $PKG/usr/doc/hicolor-icon-theme-$VERSION/* +chmod 0644 $PKG/usr/doc/hicolor-icon-theme-$VERSION/* mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/extra/source/mpg123/mpg123.SlackBuild b/source/l/hunspell/hunspell.SlackBuild index 2212eb85b..78ca6fef8 100755 --- a/extra/source/mpg123/mpg123.SlackBuild +++ b/source/l/hunspell/hunspell.SlackBuild @@ -1,5 +1,7 @@ #!/bin/sh -# Copyright 2006-2009 Patrick J. Volkerding, Sebeka, MN, USA + +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,52 +22,69 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=mpg123 -VERSION=${VERSION:-0.65} -ARCH=${ARCH:-x86_64} +PKGNAM=hunspell +VERSION=${VERSION:-1.2.9} BUILD=${BUILD:-1} - NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} rm -rf $PKG -mkdir -p $PKG $TMP +mkdir -p $TMP $PKG + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; -# Configure: +# Build and install: CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ + --localstatedir=/var \ --mandir=/usr/man \ - --program-prefix= \ - --program-suffix= \ - --build=$ARCH-slackware-linux + --disable-static \ + --with-ui \ + --with-readline \ + --build=$ARCH-slackware-linux \ -# Build and install: make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -88,19 +107,10 @@ if [ -d $PKG/usr/man ]; then ) fi -# Compress info files, if any: -if [ -d $PKG/usr/info ]; then - ( cd $PKG/usr/info - rm -f dir - gzip -9 * - ) -fi - # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING INSTALL NEWS README \ - doc \ + ABOUT-NLS AUTHORS* BUGS COPYING* ChangeLog* NEWS README* THANKS TODO \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install diff --git a/source/l/hunspell/slack-desc b/source/l/hunspell/slack-desc new file mode 100644 index 000000000..b3a4761b6 --- /dev/null +++ b/source/l/hunspell/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler--------------------------------------------------| +hunspell: hunspell (spell checker and morphological analyzer library) +hunspell: +hunspell: Hunspell is a spell checker and morphological analyzer library +hunspell: and program designed for languages with rich morphology +hunspell: and complex word compounding or character encoding. +hunspell: Hunspell interfaces: Ispell-like terminal interface using Curses +hunspell: library, Ispell pipe interface, OpenOffice.org UNO module. +hunspell: +hunspell: +hunspell: Home page: http://hunspell.sourceforge.net/ +hunspell: diff --git a/source/l/imlib/imlib.SlackBuild b/source/l/imlib/imlib.SlackBuild index 73c60d0a0..e0b2627db 100755 --- a/source/l/imlib/imlib.SlackBuild +++ b/source/l/imlib/imlib.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,18 @@ VERSION=1.9.15 -ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-5} +BUILD=${BUILD:-6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,6 +44,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ mkdir -p $TMP $PKG/usr cd $TMP rm -rf imlib-$VERSION -tar xvf $CWD/imlib-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/imlib-$VERSION.tar.?z* || exit 1 cd imlib-$VERSION zcat $CWD/imlib.mitshm.render.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/l/jasper/jasper.SlackBuild b/source/l/jasper/jasper.SlackBuild index 45b0b0768..cda0001bd 100755 --- a/source/l/jasper/jasper.SlackBuild +++ b/source/l/jasper/jasper.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007, 2008 Eric Hameleers, Eijdhoven, NL -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Permission to use, copy, modify, and distribute this software for @@ -23,10 +23,19 @@ # SUCH DAMAGE. -PRGNAM=jasper -VERSION=${VERSION:-1.900.1} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=jasper +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi case "$ARCH" in i486) SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -44,18 +53,21 @@ case "$ARCH" in athlon-xp) SLKCFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer" LIBDIRSUFFIX="" ;; + *) SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + ;; esac CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -80,10 +92,10 @@ CXXFLAGS="$SLKCFLAGS" \ make || exit 1 make DESTDIR=$PKG install -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ COPYRIGHT INSTALL LICENSE NEWS README \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION find $PKG/usr/doc -type f -exec chmod 644 {} \; find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; @@ -96,5 +108,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz diff --git a/source/l/jre/COPYRIGHT b/source/l/jre/COPYRIGHT index 2ae212072..ee5019b5c 100644 --- a/source/l/jre/COPYRIGHT +++ b/source/l/jre/COPYRIGHT @@ -1,4 +1,4 @@ -Copyright © 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, +Copyright © 2010 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual property rights relating to @@ -33,7 +33,7 @@ identified on U.S. export exclusion lists, including, but not limited to, the denied persons and specially designated nationals lists is strictly prohibited. -Copyright © 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, +Copyright © 2010 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, Etats-Unis. Tous droits rservs. Sun Microsystems, Inc. dtient les droits de proprit intellectuele diff --git a/source/l/jre/README b/source/l/jre/README index 079eb00dc..002eae2f8 100644 --- a/source/l/jre/README +++ b/source/l/jre/README @@ -370,7 +370,7 @@ override, see The Java(TM) Runtime Environment (JRE) and the JavaFX(TM) runtime are products of Sun Microsystems(TM), Inc. -Copyright © 2009 Sun Microsystems, Inc. +Copyright © 2010 Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. diff --git a/source/l/jre/THIRDPARTYLICENSEREADME.txt b/source/l/jre/THIRDPARTYLICENSEREADME.txt index 05bfc24d4..a84b0734c 100644 --- a/source/l/jre/THIRDPARTYLICENSEREADME.txt +++ b/source/l/jre/THIRDPARTYLICENSEREADME.txt @@ -1,24 +1,45 @@ DO NOT TRANSLATE OR LOCALIZE. -%% The following software may be included in this product: CS CodeViewer v1.0; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: CS CodeViewer v1.0; +Use of any of this software is governed by the terms of the license below: Copyright 1999 by CoolServlets.com. -Any errors or suggested improvements to this class can be reported as instructed on CoolServlets.com. We hope you enjoy this program... your comments will encourage further development! -This software is distributed under the terms of the BSD License. -Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -Neither name of CoolServlets.com nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. +Any errors or suggested improvements to this class can be reported as instructed +on CoolServlets.com. We hope you enjoy this program... your comments will +encourage further development! This software is distributed under the terms of +the BSD License. Redistribution and use in source and binary forms, with or +without modification, are permitted provided that the following conditions are +met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. Neither name of +CoolServlets.com nor the names of its contributors may be used to endorse or +promote products derived from this software without specific prior written +permission. + +THIS SOFTWARE IS PROVIDED BY COOLSERVLETS.COM AND CONTRIBUTORS ``AS IS'' AND ANY +EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY +DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." + +%% The following software may be included in this product: Crimson v1.1.1 ; Use +of any of this software is governed by the terms of the license below: -THIS SOFTWARE IS PROVIDED BY COOLSERVLETS.COM AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." - -%% The following software may be included in this product: Crimson v1.1.1 ; Use of any of this software is governed by the terms of the license below: /* * The Apache Software License, Version 1.1 * * -* Copyright (c) 1999-2000 The Apache Software Foundation. All rights * reserved. +* Copyright (c) 1999-2000 The Apache Software Foundation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -70,147 +91,323 @@ THIS SOFTWARE IS PROVIDED BY COOLSERVLETS.COM AND CONTRIBUTORS ``AS IS'' AND ANY */ -%% The following software may be included in this product: Xalan J2; Use of any of this software is governed by the terms of the license below: - +%% The following software may be included in this product: Xalan J2; Use of any of this +software is governed by the terms of the license below: + Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - 1. Definitions. - - "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. - "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. - - "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. - "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. - - "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. - - "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. - - "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). - - "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. - - "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owneror by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." - - "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. - - 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. - - 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a -cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. - - 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: - - (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and - - (b) You must cause any modified files to carry prominent notices stating that You changed the files; and - - (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and - - (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. - - You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use,reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. - - 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. - - 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. - - 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. - 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. +1. Definitions. - 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer,and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. +"License" shall mean the terms and conditions for use, reproduction, and +distribution as defined by Sections 1 through 9 of this document. "Licensor" +shall mean the copyright owner or entity authorized by the copyright owner that +is granting the License. + +"Legal Entity" shall mean the union of the acting entity and all other entities +that control, are controlled by, or are under common control with that entity. +For the purposes of this definition, "control" means (i) the power, direct or +indirect, to cause the direction or management of such entity, whether by +contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the +outstanding shares, or (iii) beneficial ownership of such entity. "You" (or +"Your") shall mean an individual or Legal Entity exercising permissions granted +by this License. + +"Source" form shall mean the preferred form for making modifications, including +but not limited to software source code, documentation source, and configuration +files. + +"Object" form shall mean any form resulting from mechanical transformation or +translation of a Source form, including but not limited to compiled object code, +generated documentation, and conversions to other media types. + +"Work" shall mean the work of authorship, whether in Source or Object form, made +available under the License, as indicated by a copyright notice that is included +in or attached to the work (an example is provided in the Appendix below). + +"Derivative Works" shall mean any work, whether in Source or Object form, that +is based on (or derived from) the Work and for which the editorial revisions, +annotations, elaborations, or other modifications represent, as a whole, an +original work of authorship. For the purposes of this License, Derivative Works +shall not include works that remain separable from, or merely link (or bind by +name) to the interfaces of, the Work and Derivative Works thereof. + +"Contribution" shall mean any work of authorship, including the original version +of the Work and any modifications or additions to that Work or Derivative Works +thereof, that is intentionally submitted to Licensor for inclusion in the Work +by the copyright owner or by an individual or Legal Entity authorized to submit +on behalf of the copyright owner. For the purposes of this definition, +"submitted" means any form of electronic, verbal, or written communication sent +to the Licensor or its representatives, including but not limited to +communication on electronic mailing lists, source code control systems, and +issue tracking systems that are managed by, or on behalf of, the Licensor for +the purpose of discussing and improving the Work, but excluding communication +that is conspicuously marked or otherwise designated in writing by the copyright +owner as "Not a Contribution." + +"Contributor" shall mean Licensor and any individual or Legal Entity on behalf +of whom a Contribution has been received by Licensor and subsequently +incorporated within the Work. + +2. Grant of Copyright License. Subject to the terms and conditions of this +License, each Contributor hereby grants to You a perpetual, worldwide, +non-exclusive, no-charge, royalty-free, irrevocable copyright license to +reproduce, prepare Derivative Works of, publicly display, publicly perform, +sublicense, and distribute the Work and such Derivative Works in Source or +Object form. + +3. Grant of Patent License. Subject to the terms and conditions of this +License, each Contributor hereby grants to You a perpetual, worldwide, +non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this +section) patent license to make, have made, use, offer to sell, sell, import, +and otherwise transfer the Work, where such license applies only to those patent +claims licensable by such Contributor that are necessarily infringed by their +Contribution(s) alone or by combination of their Contribution(s) with the Work +to which such Contribution(s) was submitted. If You institute patent litigation +against any entity (including a cross-claim or counterclaim in a lawsuit) +alleging that the Work or a Contribution incorporated within the Work +constitutes direct or contributory patent infringement, then any patent licenses +granted to You under this License for that Work shall terminate as of the date +such litigation is filed. + +4. Redistribution. You may reproduce and distribute copies of the Work or +Derivative Works thereof in any medium, with or without modifications, and in +Source or Object form, provided that You meet the following conditions: + +(a) You must give any other recipients of the Work or Derivative Works a copy of +this License; and + +(b) You must cause any modified files to carry prominent notices stating that +You changed the files; and + +(c) You must retain, in the Source form of any Derivative Works that You +distribute, all copyright, patent, trademark, and attribution notices from the +Source form of the Work, excluding those notices that do not pertain to any part +of the Derivative Works; and + +(d) If the Work includes a "NOTICE" text file as part of its distribution, then +any Derivative Works that You distribute must include a readable copy of the +attribution notices contained within such NOTICE file, excluding those notices +that do not pertain to any part of the Derivative Works, in at least one of the +following places: within a NOTICE text file distributed as part of the +Derivative Works; within the Source form or documentation, if provided along +with the Derivative Works; or, within a display generated by the Derivative +Works, if and wherever such third-party notices normally appear. The contents +of the NOTICE file are for informational purposes only and do not modify the +License. You may add Your own attribution notices within Derivative Works that +You distribute, alongside or as an addendum to the NOTICE text from the Work, +provided that such additional attribution notices cannot be construed as +modifying the License. + +You may add Your own copyright statement to Your modifications and may provide +additional or different license terms and conditions for use, reproduction, or +distribution of Your modifications, or for any such Derivative Works as a whole, +provided Your use,reproduction, and distribution of the Work otherwise complies +with the conditions stated in this License. + +5. Submission of Contributions. Unless You explicitly state otherwise, any +Contribution intentionally submitted for inclusion in the Work by You to the +Licensor shall be under the terms and conditions of this License, without any +additional terms or conditions. Notwithstanding the above, nothing herein shall +supersede or modify the terms of any separate license agreement you may have +executed with Licensor regarding such Contributions. + +6. Trademarks. This License does not grant permission to use the trade names, +trademarks, service marks, or product names of the Licensor, except as required +for reasonable and customary use in describing the origin of the Work and +reproducing the content of the NOTICE file. + +7. Disclaimer of Warranty. Unless required by applicable law or agreed to in +writing, Licensor provides the Work (and each Contributor provides its +Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied, including, without limitation, any warranties +or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A +PARTICULAR PURPOSE. You are solely responsible for determining the +appropriateness of using or redistributing the Work and assume any risks +associated with Your exercise of permissions under this License. + +8. Limitation of Liability. In no event and under no legal theory, whether in +tort (including negligence), contract, or otherwise, unless required by +applicable law (such as deliberate and grossly negligent acts) or agreed to in +writing, shall any Contributor be liable to You for damages, including any +direct, indirect, special, incidental, or consequential damages of any character +arising as a result of this License or out of the use or inability to use the +Work (including but not limited to damages for loss of goodwill, work stoppage, +computer failure or malfunction, or any and all other commercial damages or +losses), even if such Contributor has been advised of the possibility of such +damages. + +9. Accepting Warranty or Additional Liability. While redistributing the Work +or Derivative Works thereof, You may choose to offer,and charge a fee for, +acceptance of support, warranty, indemnity, or other liability obligations +and/or rights consistent with this License. However, in accepting such +obligations, You may act only on Your own behalf and on Your sole +responsibility, not on behalf of any other Contributor, and only if You agree to +indemnify, defend, and hold each Contributor harmless for any liability incurred +by, or claims asserted against, such Contributor by reason of your accepting any +such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. - To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives. +To apply the Apache License to your work, attach the following boilerplate +notice, with the fields enclosed by brackets "[]" replaced with your own +identifying information. (Don't include the brackets!) The text should be +enclosed in the appropriate comment syntax for the file format. We also +recommend that a file or class name and description of purpose be included on +the same "printed page" as the copyright notice for easier identification within +third-party archives. Copyright [yyyy] [name of copyright owner] - Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at +Licensed under the Apache License, Version 2.0 (the "License"); you may not use +this file except in compliance with the License. You may obtain a copy of the +License at http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS,WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. +Unless required by applicable law or agreed to in writing, software distributed +under the License is distributed on an "AS IS" BASIS,WITHOUT WARRANTIES OR +CONDITIONS OF ANY KIND, either express or implied. See the License for the +specific language governing permissions and limitations under the License. -%% The following software may be included in this product: NSIS 1.0j; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: NSIS 1.0j; Use of +any of this software is governed by the terms of the license below: Copyright (C) 1999-2000 Nullsoft, Inc. -This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: -1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. -2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. -3. This notice may not be removed or altered from any source distribution. Justin Frankel justin@nullsoft.com" - + +This software is provided 'as-is', without any express or implied warranty. In +no event will the authors be held liable for any damages arising from the use of +this software. Permission is granted to anyone to use this software for any +purpose, including commercial applications, and to alter it and redistribute it +freely, subject to the following restrictions: + +1. The origin of this software must not be misrepresented; you must not claim +that you wrote the original software. If you use this software in a product, an +acknowledgment in the product documentation would be appreciated but is not +required. + +2. Altered source versions must be plainly marked as such, and must not be +misrepresented as being the original software. + +3. This notice may not be removed or altered from any source distribution. +Justin Frankel justin@nullsoft.com" + %% Some Portions licensed from IBM are available at: http://www.ibm.com/software/globalization/icu/ %% Portions Copyright Eastman Kodak Company 1992 -%% Lucida is a registered trademark or trademark of Bigelow & Holmes in the U.S. and other countries. +%% Lucida is a registered trademark or trademark of Bigelow & Holmes in the U.S. +and other countries. %% Portions licensed from Taligent, Inc. -%% The following software may be included in this product:IAIK PKCS Wrapper; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product:IAIK PKCS Wrapper; Use +of any of this software is governed by the terms of the license below: -Copyright (c) 2002 Graz University of Technology. All rights reserved. -Redistribution and use in source and binary forms, with or without modification,are permitted provided that the following conditions are met: +Copyright (c) 2002 Graz University of Technology. All rights reserved. -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. -3. The end-user documentation included with the redistribution, if any, must include the following acknowledgment: +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed by IAIK of Graz University of Technology." - Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. +Alternately, this acknowledgment may appear in the software itself, if and +wherever such third-party acknowledgments normally appear. -4. The names "Graz University of Technology" and "IAIK of Graz University of Technology" must not be used to endorse or promote products derived from this software without prior written permission. +4. The names "Graz University of Technology" and "IAIK of Graz University of +Technology" must not be used to endorse or promote products derived from this +software without prior written permission. -5. Products derived from this software may not be called "IAIK PKCS Wrapper", nor may "IAIK" appear in their name, without prior written permission of Graz University of Technology. +5. Products derived from this software may not be called "IAIK PKCS Wrapper", +nor may "IAIK" appear in their name, without prior written permission of Graz +University of Technology. -THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE LICENSOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE +GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: Document Object +Model (DOM) v. Level 3; Use of any of this software is governed by the terms of +the license below: -%% The following software may be included in this product: Document Object Model (DOM) v. Level 3; Use of any of this software is governed by the terms of the license below: W3C SOFTWARE NOTICE AND LICENSE http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231 -This work (and included software, documentation such as READMEs, or other related items) is being provided by the copyright holders under the following license. By obtaining, using and/or copying this work, you (the licensee) agree that you have read, understood, and will comply with the following terms and conditions. - -Permission to copy, modify, and distribute this software and its documentation, with or without modification, for -any purpose and without fee or royalty is hereby granted, provided that you include the following on ALL copies -of the software and documentation or portions thereof, including modifications: - 1.The full text of this NOTICE in a location viewable to users of the redistributed or derivative work. - 2.Any pre-existing intellectual property disclaimers, notices, or terms and conditions. If none exist, the - W3C Software Short Notice should be included (hypertext is preferred, text is permitted) within the body - of any redistributed or derivative code. - 3.Notice of any changes or modifications to the files, including the date changes were made. (We - recommend you provide URIs to the location from which the code is derived.) -THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THAT THEUSE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. - -COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. -The name and trademarks of copyright holders may NOT be used in advertising or publicity pertaining to the -software without specific, written prior permission. Title to copyright in this software and any associated -documentation will at all times remain with copyright holders. +This work (and included software, documentation such as READMEs, or other +related items) is being provided by the copyright holders under the following +license. By obtaining, using and/or copying this work, you (the licensee) agree +that you have read, understood, and will comply with the following terms and +conditions. + +Permission to copy, modify, and distribute this software and its documentation, +with or without modification, for any purpose and without fee or royalty is +hereby granted, provided that you include the following on ALL copies of the +software and documentation or portions thereof, including modifications: + +1.The full text of this NOTICE in a location viewable to users of the +redistributed or derivative work. + +2.Any pre-existing intellectual property disclaimers, notices, or terms and + conditions. If none exist, the W3C Software Short Notice should be included + (hypertext is preferred, text is permitted) within the body of any + redistributed or derivative code. + +3.Notice of any changes or modifications to the files, including the date + changes were made. (We recommend you provide URIs to the location from which + the code is derived.) + +THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS +MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT +LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE +OR THAT THEUSE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD +PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to the software without specific, written prior permission. +Title to copyright in this software and any associated documentation will at all +times remain with copyright holders. ____________________________________ -This formulation of W3C's notice and license became active on December 31 2002. This version removes the -copyright ownership notice such that this license can be used with materials other than those owned by the -W3C, reflects that ERCIM is now a host of the W3C, includes references to this specific dated version of the -license, and removes the ambiguous grant of "use". Otherwise, this version is the same as the previous -version and is written so as to preserve the Free Software Foundation's assessment of GPL compatibility and -OSI's certification under the Open Source Definition. Please see our Copyright FAQ for common questions -about using materials from our site, including specific terms and conditions for packages like libwww, Amaya, -and Jigsaw. Other questions about this notice can be directed to -site-policy@w3.org. - -%% The following software may be included in this product: Xalan, Xerces; Use of any of this software is governed by the terms of the license below: /* +This formulation of W3C's notice and license became active on December 31 2002. +This version removes the copyright ownership notice such that this license can +be used with materials other than those owned by the W3C, reflects that ERCIM is +now a host of the W3C, includes references to this specific dated version of the +license, and removes the ambiguous grant of "use". Otherwise, this version is +the same as the previous version and is written so as to preserve the Free +Software Foundation's assessment of GPL compatibility and OSI's certification +under the Open Source Definition. Please see our Copyright FAQ for common +questions about using materials from our site, including specific terms and +conditions for packages like libwww, Amaya, and Jigsaw. Other questions about +this notice can be directed to site-policy@w3.org. + +%% The following software may be included in this product: Xalan, Xerces; Use +of any of this software is governed by the terms of the license below: /* + * The Apache Software License, Version 1.1 * * @@ -266,56 +463,140 @@ site-policy@w3.org. * information on the Apache Software Foundation, please see http://www.apache.org * -%% The following software may be included in this product: W3C XML Conformance Test Suites v. 20020606; Use of any of this software is governed by the terms of the license below: -W3C SOFTWARE NOTICE AND LICENSE -Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute ofTechnology, Institut National de Recherche en Informatique et en Automatique,Keio University). All Rights Reserved. http://www.w3.org/Consortium/Legal/ -This W3C work (including software, documents, or other related items) is beingprovided by the copyright holders under the following license. By obtaining,using and/or copying this work, you (the licensee) agree that you have read,understood, and will comply with the following terms and conditions: +%% The following software may be included in this product: W3C XML Conformance +Test Suites v. 20020606; Use of any of this software is governed by the terms +of the license below: -Permission to use, copy, modify, and distribute this software and its -documentation, with or without modification, for any purpose and without fee orroyalty is hereby granted, provided that you include the following on ALL copiesof the software and documentation or portions thereof, including modifications,that you make: +W3C SOFTWARE NOTICE AND LICENSE - 1. The full text of this NOTICE in a location viewable to users of theredistributed or derivative work. - 2. Any pre-existing intellectual property disclaimers, notices, or terms andconditions. If none exist, a short notice of the following form (hypertext ispreferred, text is permitted) should be used within the body of any -redistributed or derivative code: "Copyright ýý [$date-of-software] World WideWeb Consortium, (Massachusetts Institute of Technology, Institut National deRecherche en Informatique et en Automatique, Keio University). All RightsReserved. http://www.w3.org/Consortium/Legal/" - 3. Notice of any changes or modifications to the W3C files, including thedate changes were made. (We recommend you provide URIs to the location fromwhich the code is derived.) +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. +http://www.w3.org/Consortium/Legal/ -THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITEDTO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THATTHE USE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD PARTYPATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. +This W3C work (including software, documents, or other related items) is being +provided by the copyright holders under the following license. By +obtaining,using and/or copying this work, you (the licensee) agree that you have +read,understood, and will comply with the following terms and conditions: -COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. -The name and trademarks of copyright holders may NOT be used in advertising orpublicity pertaining to the software without specific, written prior permission.Title to copyright in this software and any associated documentation will at alltimes remain with copyright holders. +Permission to use, copy, modify, and distribute this software and its +documentation, with or without modification, for any purpose and without fee +orroyalty is hereby granted, provided that you include the following on ALL +copiesof the software and documentation or portions thereof, including +modifications,that you make: + +1. The full text of this NOTICE in a location viewable to users of the +redistributed or derivative work. + +2. Any pre-existing intellectual property disclaimers, notices, or terms and +conditions. If none exist, a short notice of the following form (hypertext is +preferred, text is permitted) should be used within the body of any +redistributed or derivative code: "Copyright [$date-of-software] World Wide Web +Consortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" + +3. Notice of any changes or modifications to the W3C files, including the date +changes were made. (We recommend you provide URIs to the location from which +the code is derived.) + +THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS +MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT +LIMITEDTO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE +OR THATTHE USE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD +PARTYPATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. + +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to the software without specific, written prior permission. +Title to copyright in this software and any associated documentation will at all +times remain with copyright holders. ____________________________________ -This formulation of W3C's notice and license became active on August 14 1998 soas to improve compatibility with GPL. This version ensures that W3C softwarelicensing terms are no more restrictive than GPL and consequently W3C softwaremay be distributed in GPL packages. See the older formulation for the policyprior to this date. Please see our Copyright FAQ for common questions aboutusing materials from our site, including specific terms and conditions forpackages like libwww, Amaya, and Jigsaw. Other questions about this notice canbe directed to site-policy@w3.org. - -%% The following software may be included in this product: W3C XML Schema Test Collection v. 1.16.2; Use of any of this software is governed by the terms of the license below: W3C DOCUMENT NOTICE AND LICENSE -Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute ofTechnology, Institut National de Recherche en Informatique et en Automatique,Keio University). All Rights Reserved. +This formulation of W3C's notice and license became active on August 14 1998 +soas to improve compatibility with GPL. This version ensures that W3C software +licensing terms are no more restrictive than GPL and consequently W3C software +may be distributed in GPL packages. See the older formulation for the policy +prior to this date. Please see our Copyright FAQ for common questions about +using materials from our site, including specific terms and conditions for +packages like libwww, Amaya, and Jigsaw. Other questions about this notice can +be directed to site-policy@w3.org. + +%% The following software may be included in this product: W3C XML Schema Test +Collection v. 1.16.2; Use of any of this software is governed by the terms of +the license below: W3C DOCUMENT NOTICE AND LICENSE + +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. http://www.w3.org/Consortium/Legal/ -Public documents on the W3C site are provided by the copyright holders under thefollowing license. The software or Document Type Definitions (DTDs) associatedwith W3C specifications are governed by the Software Notice. By using and/orcopying this document, or the W3C document from which this statement is linked,you (the licensee) agree that you have read, understood, and will comply withthe following terms and conditions: +Public documents on the W3C site are provided by the copyright holders under the +following license. The software or Document Type Definitions (DTDs) associated +with W3C specifications are governed by the Software Notice. By using and/or +copying this document, or the W3C document from which this statement is +linked,you (the licensee) agree that you have read, understood, and will comply +with the following terms and conditions: -Permission to use, copy, and distribute the contents of this document, or theW3C document from which this statement is linked, in any medium for any purposeand without fee or royalty is hereby granted, provided that you include thefollowing on ALL copies of the document, or portions thereof, that you use: - 1. A link or URL to the original W3C document. - 2. The pre-existing copyright notice of the original author, or if it doesn'texist, a notice of the form: "Copyright [$date-of-document] World Wide WebConsortium, (Massachusetts Institute of Technology, Institut National deRecherche en Informatique et en Automatique, Keio University). All RightsReserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but atextual representation is permitted.) - 3. If it exists, the STATUS of the W3C document. +Permission to use, copy, and distribute the contents of this document, or theW3C +document from which this statement is linked, in any medium for any purpose and +without fee or royalty is hereby granted, provided that you include the +following on ALL copies of the document, or portions thereof, that you use: -When space permits, inclusion of the full text of this NOTICE should beprovided. We request that authorship attribution be provided in any software,documents, or other items or products that you create pursuant to the +1. A link or URL to the original W3C document. + +2. The pre-existing copyright notice of the original author, or if it doesn't +exist, a notice of the form: "Copyright [$date-of-document] World Wide +WebConsortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but +atextual representation is permitted.) + +3. If it exists, the STATUS of the W3C document. + +When space permits, inclusion of the full text of this NOTICE should be +provided. We request that authorship attribution be provided in any +software,documents, or other items or products that you create pursuant to the implementation of the contents of this document, or any portion thereof. -No right to create modifications or derivatives of W3C documents is grantedpursuant to this license. However, if additional requirements (documented in theCopyright FAQ) are satisfied, the right to create modifications or derivativesis sometimes granted by the W3C to individuals complying with those requirements. -THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. - -COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. -The name and trademarks of copyright holders may NOT be used in advertising orpublicity pertaining to this document or its contents without specific, writtenprior permission. Title to copyright in this document will at all times remainwith copyright holders. +No right to create modifications or derivatives of W3C documents is granted +pursuant to this license. However, if additional requirements (documented in +the Copyright FAQ) are satisfied, the right to create modifications or +derivatives is sometimes granted by the W3C to individuals complying with those +requirements. THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO +REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, +NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR +ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY +THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE +PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. + +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to this document or its contents without specific, written +prior permission. Title to copyright in this document will at all times remain +with copyright holders. ---------------------------------------------------------------------------- -This formulation of W3C's notice and license became active on April 05 1999 soas to account for the treatment of DTDs, schema's and bindings. See the olderformulation for the policy prior to this date. Please see our Copyright FAQ forcommon questions about using materials from our site, including specific termsand conditions for packages like libwww, Amaya, and Jigsaw. Other questionsabout this notice can be directed to site-policy@w3.org. -webmaster -(last updated by reagle on 1999/04/99.) - +This formulation of W3C's notice and license became active on April 05 1999 soas +to account for the treatment of DTDs, schema's and bindings. See the older +formulation for the policy prior to this date. Please see our Copyright FAQ for +common questions about using materials from our site, including specific terms +and conditions for packages like libwww, Amaya, and Jigsaw. Other questions +about this notice can be directed to site-policy@w3.org. webmaster (last +updated by reagle on 1999/04/99.) + + +%% The following software may be included in this product: Mesa 3-D graphics +library v. 5; Use of any of this software is governed by the terms of the +license below: -%% The following software may be included in this product: Mesa 3-D graphics library v. 5; Use of any of this software is governed by the terms of the license below: core Mesa code include/GL/gl.h Brian Paul Mesa GLX driver include/GL/glx.h Brian Paul Mesa Ext registry include/GL/glext.h SGI @@ -323,329 +604,883 @@ SGI Free B include/GL/glxext.h Mesa license: -The Mesa distribution consists of several components. Different copyrights andlicenses apply to different components. For example, GLUT is copyrighted by MarkKilgard, some demo programs are copyrighted by SGI, some of the Mesa devicedrivers are copyrighted by their authors. See below for a list of Mesa'scomponents and the copyright/license for each. +The Mesa distribution consists of several components. Different copyrights and +licenses apply to different components. For example, GLUT is copyrighted by +Mark Kilgard, some demo programs are copyrighted by SGI, some of the Mesa device +drivers are copyrighted by their authors. See below for a list of Mesa's +components and the copyright/license for each. -The core Mesa library is licensed according to the terms of the XFree86copyright (an MIT-style license). This allows integration with the XFree86/DRIproject. Unless otherwise stated, the Mesa source code and documentation islicensed as follows: +The core Mesa library is licensed according to the terms of the XFree86copyright +(an MIT-style license). This allows integration with the XFree86/DRIproject. +Unless otherwise stated, the Mesa source code and documentation is licensed as +follows: -Copyright (C) 1999-2003 Brian Paul All Rights Reserved. +Copyright (C) 1999-2003 Brian Paul All Rights Reserved. -Permission is hereby granted, free of charge, to any person obtaining acopy of this software and associated documentation files (the "Software"),to deal in the Software without restriction, including without limitationthe rights to use, copy, modify, merge, publish, distribute, sublicense,and/or sell copies of the Software, and to permit persons to whom the -Software is furnished to do so, subject to the following conditions: +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"),to deal in the +Software without restriction, including without limitation the rights to use, +copy, modify, merge, publish, distribute, sublicense,and/or sell copies of the +Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: -The above copyright notice and this permission notice shall be includedin all copies or substantial portions of the Software. +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESSOR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS +FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALLBRIAN PAUL BE +LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER INAN ACTION OF +CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESSOR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALLBRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER INAN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. SGI FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000]) 1. Definitions. -1.1 "Additional Notice Provisions" means such additional provisions as appear in the Notice in Original Code under the heading "Additional Notice Provisions." -1.2 "Covered Code" means the Original Code or Modifications, or any combination thereof. -1.3 "Hardware" means any physical device that accepts input, processes input, stores the results of processing, and/or provides output. -1.4 "Larger Work" means a work that combines Covered Code or portions thereof with code not governed by the terms of this License. -1.5 "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. -1.6 "License" means this document. -1.7 "Licensed Patents" means patent claims Licensable by SGI that are infringed by the use or sale of Original Code or any Modifications provided by SGI, or any combination thereof. -1.8 "Modifications" means any addition to or deletion from the substance or structure of the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modification is: A. Any addition to the contents of a file containing Original Code and/or addition to or deletion from the contents of a file containing previous Modifications.B. Any new file that contains any part of the Original Code or previous Modifications. -1.9 "Notice" means any notice in Original Code or Covered Code, as required by and in compliance with this License. -1.10 "Original Code" means source code of computer software code that is described in the source code Notice required by Exhibit A as Original Code, and updates and error corrections specifically thereto. -1.11 "Recipient" means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 8. For legal entities, "Recipient" includes any entity that controls, is controlled by, or is under common control with Recipient. For purposes of this definition, "control" of an entity means (a) the power, direct or indirect, to direct or manage such entity, or (b) ownership of fifty percent (50%) or more of the outstanding shares or beneficial ownership of such entity. -1.12 "Recipient Patents" means patent claims Licensable by a Recipient that are infringed by the use or sale of Original Code or any Modifications provided by SGI, or any combination thereof. -1.13 "SGI" means Silicon Graphics, Inc. -1.14 "SGI Patents" means patent claims Licensable by SGI other than the Licensed Patents.2. License Grant and Restrictions. -2.1 SGI License Grant. Subject to the terms of this License and any third party intellectual property claims, for the duration of intellectual property protections inherent in the Original Code, SGI hereby grants Recipient a worldwide, royalty-free, non-exclusive license, to do the following: (i) under copyrights Licensable by SGI, to reproduce, distribute, create derivative works from, and, to the extent applicable, display and perform the Original Code and/or any Modifications provided by SGI alone and/or as part of a Larger Work; and (ii) under any Licensable Patents, to make, have made, use, sell, offer for sale, import and/or otherwise transfer the Original Code and/or any Modifications provided by SGI. Recipient accepts the terms and conditions of this License by undertaking any of the aforementioned actions. The patent license shall apply to the Covered Code if, at the time any related Modification is added, such addition of the Modification causes such combination to be covered by the Licensed Patents. The patent license in Section 2.1(ii) shall not apply to any other combinations that include the Modification. No patent license is provided under SGI Patents for infringements of SGI Patents by Modifications not provided by SGI or combinations of Original Code and Modifications not provided by SGI. 2.2 Recipient License Grant. Subject to the terms of this License and any third party intellectual property claims, Recipient hereby grants SGI and any other Recipients a worldwide, royalty-free, non-exclusive license, under any Recipient Patents, to make, have made, use, sell, offer for sale, import and/or otherwise transfer the Original Code and/or any Modifications provided by SGI. -2.3 No License For Hardware Implementations. The licenses granted in Section 2.1 and 2.2 are not applicable to implementation in Hardware of the algorithms embodied in the Original Code or any Modifications provided by SGI . -3. Redistributions. -3.1 Retention of Notice/Copy of License. The Notice set forth in Exhibit A, below, must be conspicuously retained or included in any and all redistributions of Covered Code. For distributions of the Covered Code in source code form, the Notice must appear in every file that can include a text comments field; in executable form, the Notice and a copy of this License must appear in related documentation or collateral where the Recipient's rights relating to Covered Code are described. Any Additional Notice Provisions which actually appears in the Original Code must also be retained or included in any and all redistributions of Covered Code. -3.2 Alternative License. Provided that Recipient is in compliance with the terms of this License, Recipient may, so long as without derogation of any of SGI's rights in and to the Original Code, distribute the source code and/or executable version(s) of Covered Code under (1) this License; (2) a license identical to this License but for only such changes as are necessary in order to clarify Recipient's role as licensor of Modifications; and/or (3) a license of Recipient's choosing, containing terms different from this License, provided that the license terms include this Section 3 and Sections 4, 6, 7, 10, 12, and 13, which terms may not be modified or superseded by any other terms of such license. If Recipient elects to use any license other than this License, Recipient must make it absolutely clear that any of its terms which differ from this License are offered by Recipient alone, and not by SGI. It is emphasized that this License is a limited license, and, regardless of the license form employed by Recipient in accordance with this Section 3.2, Recipient may relicense only such rights, in Original Code and Modifications by SGI, as it has actually been granted by SGI in this License. -3.3 Indemnity. Recipient hereby agrees to indemnify SGI for any liability incurred by SGI as a result of any such alternative license terms Recipient offers. -4. Termination. This License and the rights granted hereunder will terminate automatically if Recipient breaches any term herein and fails to cure such breach within 30 days thereof. Any sublicense to the Covered Code that is properly granted shall survive any termination of this License, absent termination by the terms of such sublicense. Provisions that, by their nature, must remain in effect beyond the termination of this License, shall survive. -5. No Trademark Or Other Rights. This License does not grant any rights to: (i) any software apart from the Covered Code, nor shall any other rights or licenses not expressly granted hereunder arise by implication, estoppel or otherwise with respect to the Covered Code; (ii) any trade name, trademark or service mark whatsoever, including without limitation any related right for purposes of endorsement or promotion of products derived from the Covered Code, without prior written permission of SGI; or (iii) any title to or ownership of the Original Code, which shall at all times remains with SGI. All rights in the Original Code not expressly granted under this License are reserved. -6. Compliance with Laws; Non-Infringement. There are various worldwide laws, regulations, and executive orders applicable to dispositions of Covered Code, including without limitation export, re-export, and import control laws, regulations, and executive orders, of the U.S. government and other countries, and Recipient is reminded it is obliged to obey such laws, regulations, and executive orders. Recipient may not distribute Covered Code that (i) in any way infringes (directly or contributorily) any intellectual property rights of any kind of any other person or entity or (ii) breaches any representation or warranty, express, implied or statutory, to which, under any applicable law, it might be deemed to have been subject. -7. Claims of Infringement. If Recipient learns of any third party claim that any disposition of Covered Code and/or functionality wholly or partially infringes the third party's intellectual property rights, Recipient will promptly notify SGI of such claim. -8. Versions of the License. SGI may publish revised and/or new versions of the License from time to time, each with a distinguishing version number. Once Covered Code has been published under a particular version of the License, Recipient may, for the duration of the license, continue to use it under the terms of that version, or choose to use such Covered Code under the terms of any subsequent version published by SGI. Subject to the provisions of Sections 3 and 4 of this License, only SGI may modify the terms applicable to Covered Code created under this License. -9. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED "AS IS." ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. SGI ASSUMES NO RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE DEFECTIVE IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT SUBJECT TO THIS DISCLAIMER. -10. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY, WHETHER TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIABILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, LOSS OF DATA, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SGI's NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND LIMITATION MAY NOT APPLY TO RECIPIENT. -11. Indemnity. Recipient shall be solely responsible for damages arising, directly or indirectly, out of its utilization of rights under this License. Recipient will defend, indemnify and hold harmless Silicon Graphics, Inc. from and against any loss, liability, damages, costs or expenses (including the payment of reasonable attorneys fees) arising out of Recipient's use, modification, reproduction and distribution of the Covered Code or out of any representation or warranty made by Recipient. -12. U.S. Government End Users. The Covered Code is a "commercial item" consisting of "commercial computer software" as such terms are defined in title 48 of the Code of Federal Regulations and all U.S. Government End Users acquire only the rights set forth in this License and are subject to the terms of this License. -13. Miscellaneous. This License represents the complete agreement concerning the its subject matter. If any provision of this License is held to be unenforceable, such provision shall be reformed so as to achieve as nearly as possible the same legal and economic effect as the original provision and the remainder of this License will remain in effect. This License shall be governed by and construed in accordance with the laws of the United States and the State of California as applied to agreements entered into and to be performed entirely within California between California residents. Any litigation relating to this License shall be subject to the exclusive jurisdiction of the Federal Courts of the Northern District of California (or, absent subject matter jurisdiction in such courts, the courts of the State of California), with venue lying exclusively in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation that provides that the language of a contract shall be construed against the drafter shall not apply to this License. -Exhibit A -License Applicability. Except to the extent portions of this file are made subject to an alternative license as permitted in the SGI Free Software License B, Version 1.1 (the "License"), the contents of this file are subject only to the provisions of the License. You may not use this file except in compliance with the License. You may obtain a copy of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB -Note that, as provided in the License, the Software is distributed on an "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.Original Code. The Original Code is: [name of software, version number, and release date], developed by Silicon Graphics, Inc. The Original Code is Copyright (c) [dates of first publication, as appearing in the Notice in the Original Code] Silicon Graphics, Inc. Copyright in any portions created by third parties is as indicated elsewhere herein. All Rights Reserved.Additional Notice Provisions: [such additional provisions, if any, as appear in the Notice in the Original Code under the heading "Additional Notice Provisions"] - -%% The following software may be included in this product: Byte Code Engineering Library (BCEL) v. 5; Use of any of this software is governed by the terms of the license below: -Apache Software License -/ -==================================================================== -The Apache Software License, Version 1.1 +1.1 "Additional Notice Provisions" means such additional provisions as appear in +the Notice in Original Code under the heading "Additional Notice Provisions." -Copyright (c) 2001 The Apache Software Foundation. Allrights reserved. +1.2 "Covered Code" means the Original Code or Modifications, or any combination +thereof. -Redistribution and use in source and binary forms, withor without modification, are permitted provided that the followingconditions are met: +1.3 "Hardware" means any physical device that accepts input, processes input, +stores the results of processing, and/or provides output. -1. Redistributions of source code must retain the abovecopyright notice, this list of conditions and the followingdisclaimer. +1.4 "Larger Work" means a work that combines Covered Code or portions thereof +with code not governed by the terms of this License. -2. Redistributions in binary form must reproduce theabove copyright notice, this list of conditions and the followingdisclaimer in the documentation and/or other materials providedwith the distribution. +1.5 "Licensable" means having the right to grant, to the maximum extent +possible, whether at the time of the initial grant or subsequently acquired, any +and all of the rights conveyed herein. -3. The end-user documentation included with theredistribution, if any, must include the following acknowledgment: -"This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in thesoftware itself, if and wherever such third-party acknowledgmentsnormally appear. +1.6 "License" means this document. -4. The names "Apache" and "Apache Software Foundation"and "Apache BCEL" must not be used to endorse or promoteproducts derived from this software without prior writtenpermission. For written permission, please contact apache@apache.org. +1.7 "Licensed Patents" means patent claims Licensable by SGI that are infringed +by the use or sale of Original Code or any Modifications provided by SGI, or any +combination thereof. + +1.8 "Modifications" means any addition to or deletion from the substance or +structure of the Original Code or any previous Modifications. When Covered Code +is released as a series of files, a Modification is: A. Any addition to the +contents of a file containing Original Code and/or addition to or deletion from +the contents of a file containing previous Modifications.B. Any new file that +contains any part of the Original Code or previous Modifications. + +1.9 "Notice" means any notice in Original Code or Covered Code, as required by +and in compliance with this License. + +1.10 "Original Code" means source code of computer software code that is +described in the source code Notice required by Exhibit A as Original Code, and +updates and error corrections specifically thereto. + +1.11 "Recipient" means an individual or a legal entity exercising rights under, +and complying with all of the terms of, this License or a future version of this +License issued under Section 8. For legal entities, "Recipient" includes any +entity that controls, is controlled by, or is under common control with +Recipient. For purposes of this definition, "control" of an entity means (a) +the power, direct or indirect, to direct or manage such entity, or (b) ownership +of fifty percent (50%) or more of the outstanding shares or beneficial ownership +of such entity. + +1.12 "Recipient Patents" means patent claims Licensable by a Recipient that are +infringed by the use or sale of Original Code or any Modifications provided by +SGI, or any combination thereof. -5. Products derived from this software may not be called"Apache", "Apache BCEL", nor may "Apache" appear in their name,without prior written permission of the Apache SoftwareFoundation. +1.13 "SGI" means Silicon Graphics, Inc. -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWAREFOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVERCAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THEPOSSIBILITY OF SUCH DAMAGE. -==================================================================== +1.14 "SGI Patents" means patent claims Licensable by SGI other than the Licensed +Patents. + +2. License Grant and Restrictions. + +2.1 SGI License Grant. Subject to the terms of this License and any third party +intellectual property claims, for the duration of intellectual property +protections inherent in the Original Code, SGI hereby grants Recipient a +worldwide, royalty-free, non-exclusive license, to do the following: (i) under +copyrights Licensable by SGI, to reproduce, distribute, create derivative works +from, and, to the extent applicable, display and perform the Original Code +and/or any Modifications provided by SGI alone and/or as part of a Larger Work; +and (ii) under any Licensable Patents, to make, have made, use, sell, offer for +sale, import and/or otherwise transfer the Original Code and/or any +Modifications provided by SGI. Recipient accepts the terms and conditions of +this License by undertaking any of the aforementioned actions. The patent +license shall apply to the Covered Code if, at the time any related Modification +is added, such addition of the Modification causes such combination to be +covered by the Licensed Patents . The patent license in Section 2.1(ii) shall +not apply to any other combinations that include the Modification. No patent +license is provided under SGI Patents for infringements of SGI Patents by +Modifications not provided by SGI or combinations of Original Code and +Modifications not provided by SGI. + +2.2 Recipient License Grant. Subject to the terms of this License and any third +party intellectual property claims, Recipient hereby grants SGI and any other +Recipients a worldwide, royalty-free, non-exclusive license, under any Recipient +Patents, to make, have made, use, sell, offer for sale, import and/or otherwise +transfer the Original Code and/or any Modifications provided by SGI. + +2.3 No License For Hardware Implementations. The licenses granted in Section +2.1 and 2.2 are not applicable to implementation in Hardware of the algorithms +embodied in the Original Code or any Modifications provided by SGI . -This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache Software Foundation, please see http://www.apache.org. / +3. Redistributions. +3.1 Retention of Notice/Copy of License. The Notice set forth in Exhibit A, +below, must be conspicuously retained or included in any and all redistributions +of Covered Code. For distributions of the Covered Code in source code form, the +Notice must appear in every file that can include a text comments field; in +executable form, the Notice and a copy of this License must appear in related +documentation or collateral where the Recipient's rights relating to Covered +Code are described. Any Additional Notice Provisions which actually appears in +the Original Code must also be retained or included in any and all +redistributions of Covered Code. + +3.2 Alternative License. Provided that Recipient is in compliance with the +terms of this License, Recipient may, so long as without derogation of any of +SGI's rights in and to the Original Code, distribute the source code and/or +executable version(s) of Covered Code under (1) this License; (2) a license +identical to this License but for only such changes as are necessary in order to +clarify Recipient's role as licensor of Modifications; and/or (3) a license of +Recipient's choosing, containing terms different from this License, provided +that the license terms include this Section 3 and Sections 4, 6, 7, 10, 12, and +13, which terms may not be modified or superseded by any other terms of such +license. If Recipient elects to use any license other than this License, +Recipient must make it absolutely clear that any of its terms which differ from +this License are offered by Recipient alone, and not by SGI. It is emphasized +that this License is a limited license, and, regardless of the license form +employed by Recipi ent in accordance with this Section 3.2, Recipient may +relicense only such rights, in Original Code and Modifications by SGI, as it has +actually been granted by SGI in this License. + +3.3 Indemnity. Recipient hereby agrees to indemnify SGI for any liability +incurred by SGI as a result of any such alternative license terms Recipient +offers. + +4. Termination. This License and the rights granted hereunder will terminate +automatically if Recipient breaches any term herein and fails to cure such +breach within 30 days thereof. Any sublicense to the Covered Code that is +properly granted shall survive any termination of this License, absent +termination by the terms of such sublicense. Provisions that, by their nature, +must remain in effect beyond the termination of this License, shall survive. + +5. No Trademark Or Other Rights. This License does not grant any rights to: +(i) any software apart from the Covered Code, nor shall any other rights or +licenses not expressly granted hereunder arise by implication, estoppel or +otherwise with respect to the Covered Code; (ii) any trade name, trademark or +service mark whatsoever, including without limitation any related right for +purposes of endorsement or promotion of products derived from the Covered Code, +without prior written permission of SGI; or (iii) any title to or ownership of +the Original Code, which shall at all times remains with SGI. All rights in the +Original Code not expressly granted under this License are reserved. + +6. Compliance with Laws; Non-Infringement. There are various worldwide laws, +regulations, and executive orders applicable to dispositions of Covered Code, +including without limitation export, re-export, and import control laws, +regulations, and executive orders, of the U.S. government and other countries, +and Recipient is reminded it is obliged to obey such laws, regulations, and +executive orders. Recipient may not distribute Covered Code that (i) in any way +infringes (directly or contributorily) any intellectual property rights of any +kind of any other person or entity or (ii) breaches any representation or +warranty, express, implied or statutory, to which, under any applicable law, it +might be deemed to have been subject. + +7. Claims of Infringement. If Recipient learns of any third party claim that +any disposition of Covered Code and/or functionality wholly or partially +infringes the third party's intellectual property rights, Recipient will +promptly notify SGI of such claim. + +8. Versions of the License. SGI may publish revised and/or new versions of the +License from time to time, each with a distinguishing version number. Once +Covered Code has been published under a particular version of the License, +Recipient may, for the duration of the license, continue to use it under the +terms of that version, or choose to use such Covered Code under the terms of any +subsequent version published by SGI. Subject to the provisions of Sections 3 +and 4 of this License, only SGI may modify the terms applicable to Covered Code +created under this License. + +9. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED "AS IS." ALL EXPRESS AND +IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED, INCLUDING, WITHOUT LIMITATION, +ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, +FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. SGI ASSUMES NO RISK AS +TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE +DEFECTIVE IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR +OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL PART OF THIS +LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT SUBJECT TO +THIS DISCLAIMER. + +10. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY, WHETHER +TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIABILITY), CONTRACT, +OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, +SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, +WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, LOSS OF DATA, +COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR +LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH +DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR +PERSONAL INJURY RESULTING FROM SGI's NEGLIGENCE TO THE EXTENT APPLICABLE LAW +PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR +LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND +LIMITATION MAY NOT APPLY TO RECIPIENT. + +11. Indemnity. Recipient shall be solely responsible for damages arising, +directly or indirectly, out of its utilization of rights under this License. +Recipient will defend, indemnify and hold harmless Silicon Graphics, Inc. from +and against any loss, liability, damages, costs or expenses (including the +payment of reasonable attorneys fees) arising out of Recipient's use, +modification, reproduction and distribution of the Covered Code or out of any +representation or warranty made by Recipient. + +12. U.S. Government End Users. The Covered Code is a "commercial item" +consisting of "commercial computer software" as such terms are defined in title +48 of the Code of Federal Regulations and all U.S. Government End Users acquire +only the rights set forth in this License and are subject to the terms of this +License. + +13. Miscellaneous. This License represents the complete agreement concerning +the its subject matter. If any provision of this License is held to be +unenforceable, such provision shall be reformed so as to achieve as nearly as +possible the same legal and economic effect as the original provision and the +remainder of this License will remain in effect. This License shall be governed +by and construed in accordance with the laws of the United States and the State +of California as applied to agreements entered into and to be performed entirely +within California between California residents. Any litigation relating to this +License shall be subject to the exclusive jurisdiction of the Federal Courts of +the Northern District of California (or, absent subject matter jurisdiction in +such courts, the courts of the State of California), with venue lying +exclusively in Santa Clara County, California, with the losing party responsible +for costs, including without limitation, court costs and reasonable attorneys +fees and ex penses. The application of the United Nations Convention on +Contracts for the International Sale of Goods is expressly excluded. Any law or +regulation that provides that the language of a contract shall be construed +against the drafter shall not apply to this License. + +Exhibit A License Applicability. Except to the extent portions of this file are +made subject to an alternative license as permitted in the SGI Free Software +License B, Version 1.1 (the "License"), the contents of this file are subject +only to the provisions of the License. You may not use this file except in +compliance with the License. You may obtain a copy of the License at Silicon +Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway, Mountain View, +CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB Note that, as provided +in the License, the Software is distributed on an "AS IS" basis, with ALL +EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT +LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, +SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +Original Code. The Original Code is: [name of software, version number, and +release date], developed by Silicon Graphics, Inc. The Original Code is +Copyright (c) [dates of first publication, as appearing in the Notice in the +Original Code] Silicon Graphics, Inc. Copyright in any portions created by +third parties is as indicated elsewhere herein. All Rights Reserved. +Additional Notice Provisions: [such additional provisions, if any, as appear in +the Notice in the Original Code under the heading "Additional Notice +Provisions"] + +%% The following software may be included in this product: Byte Code +Engineering Library (BCEL) v. 5; Use of any of this software is governed by the +terms of the license below: +Apache Software License + +/ +==================================================================== +The Apache Software License, Version 1.1 -%% The following software may be included in this product: Regexp, Regular Expression Package v. 1.2; Use of any of this software is governed by the terms of the license below: The Apache Software License, Version 1.1 Copyright (c) 2001 The Apache Software Foundation. All rights reserved. -Redistribution and use in source and binary forms, with or without modification,are permitted provided that the following conditions are met: -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials providedwith the distribution. + +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names "Apache" and "Apache Software Foundation"and "Apache BCEL" must +not be used to endorse or promote products derived from this software without +prior written permission. For written permission, please contact +apache@apache.org. + +5. Products derived from this software may not be called"Apache", "Apache +BCEL", nor may "Apache" appear in their name,without prior written permission of +the Apache Software Foundation. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED ORIMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWAREFOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT,INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, +OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVERCAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED +OF THEPOSSIBILITY OF SUCH DAMAGE. +==================================================================== -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. / -3. The end-user documentation included with the redistribution, if any, must include the following acknowledgment: -"This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. -4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. -5. Products derived from this software may not be called "Apache", "Apache Turbine", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation. +%% The following software may be included in this product: Regexp, Regular +Expression Package v. 1.2; Use of any of this software is governed by the terms +of the license below: The Apache Software License, Version 1.1 -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -==================================================================== -This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache Software Foundation, please see http://www.apache.org. +Copyright (c) 2001 The Apache Software Foundation. All rights reserved. -%% The following software may be included in this product: CUP Parser Generator for Java v. 0.10k; Use of any of this software is governed by the terms of the license below: CUP Parser Generator Copyright Notice, License, and Disclaimer +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: -Copyright 1996-1999 by Scott Hudson, Frank Flannery, C. Scott Ananian -Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided thatthe above copyright notice appear in all copies and that both the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the names of the authors or their employersnot be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. -The authors and their employers disclaim all warranties with regard to thissoftware, including all implied warranties of merchantability and fitness. In no event shall the authors or their employers be liable for anyspecial, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract,negligence or other tortious action, arising out of or in connection withthe use or performance of this software. +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. -%% The following software may be included in this product: JLex: A Lexical Analyzer Generator for Java v. 1.2.5; Use of any of this software is governed by the terms of the license below: JLEX COPYRIGHT NOTICE, LICENSE AND DISCLAIMER. +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. -Copyright 1996-2003 by Elliot Joel Berk and C. Scott Ananian +4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" +must not be used to endorse or promote products derived from this software +without prior written permission. For written permission, please contact +apache@apache.org. -Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright noticeappear in all copies and that both the copyright notice and this permission notice and warrantydisclaimer appear in supporting documentation, and that the name of the authors or their employersnot be used in advertising or publicity pertaining to distribution of the software withoutspecific, written prior permission. +5. Products derived from this software may not be called "Apache", "Apache +Turbine", nor may "Apache" appear in their name, without prior written +permission of the Apache Software Foundation. -The authors and their employers disclaim all warranties with regard to thissoftware, including all implied warranties of merchantability and fitness. In no event shall the authorsor their employers be liable for any special, indirect or consequential damages or any damageswhatsoever resulting from loss of use, data or profits, whether in an action of contract, negligenceor other tortious action, arising out of or in connection with the use or performance of thissoftware. +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -Java is a trademark of Sun Microsystems, Inc. References to the Java programminglanguage in relation to JLex are not meant to imply that Sun endorses this product. +==================================================================== -%% The following software may be included in this product: SAX v. 2.0.1; Use of any of this software is governed by the terms of the license below: Copyright Status +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. + +%% The following software may be included in this product: CUP Parser Generator +for Java v. 0.10k; Use of any of this software is governed by the terms of the +license below: CUP Parser Generator Copyright Notice, License, and Disclaimer + +Copyright 1996-1999 by Scott Hudson, Frank Flannery, C. Scott Ananian + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, provided that +the above copyright notice appear in all copies and that both the copyright +notice and this permission notice and warranty disclaimer appear in supporting +documentation, and that the names of the authors or their employers not be used +in advertising or publicity pertaining to distribution of the software without +specific, written prior permission. + +The authors and their employers disclaim all warranties with regard to this +software, including all implied warranties of merchantability and fitness. In +no event shall the authors or their employers be liable for any special, +indirect or consequential damages or any damages whatsoever resulting from loss +of use, data or profits, whether in an action of contract,negligence or other +tortious action, arising out of or in connection with the use or performance of +this software. + +%% The following software may be included in this product: JLex: A Lexical +Analyzer Generator for Java v. 1.2.5; Use of any of this software is governed +by the terms of the license below: JLEX COPYRIGHT NOTICE, LICENSE AND +DISCLAIMER. + +Copyright 1996-2003 by Elliot Joel Berk and C. Scott Ananian + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, provided that +the above copyright notice appear in all copies and that both the copyright +notice and this permission notice and warranty disclaimer appear in supporting +documentation, and that the name of the authors or their employers not be used +in advertising or publicity pertaining to distribution of the software without +specific, written prior permission. + +The authors and their employers disclaim all warranties with regard to this +software, including all implied warranties of merchantability and fitness. In +no event shall the authors or their employers be liable for any special, +indirect or consequential damages or any damages whatsoever resulting from loss +of use, data or profits, whether in an action of contract, negligence or other +tortious action, arising out of or in connection with the use or performance of +this software. + +Java is a trademark of Sun Microsystems, Inc. References to the Java +programming language in relation to JLex are not meant to imply that Sun +endorses this product. + +%% The following software may be included in this product: SAX v. 2.0.1; Use +of any of this software is governed by the terms of the license below: +Copyright Status SAX is free! -In fact, it's not possible to own a license to SAX, since it's been placed in the public domain. +In fact, it's not possible to own a license to SAX, since it's been placed in +the public domain. No Warranty -Because SAX is released to the public domain, there is no warranty for the design or for the software implementation, to the extent permitted by applicable law. Except when otherwise stated in writing the copyright holders and/or other parties provide SAX "as is" without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of SAX is with you. Should SAX prove defective, you assume the cost of all necessary servicing, repair or correction. - -In no event unless required by applicable law or agreed to in writing will any copyright holder, or any other party who may modify and/or redistribute SAX, be liable to you for damages, including any general, special, incidental or consequential damages arising out of the use or inability to use SAX (including but not limited to loss of data or data being rendered inaccurate or losses sustained by you or third parties or a failure of the SAX to operate with any other programs), even if such holder or other party has been advised of the possibility of such damages. +Because SAX is released to the public domain, there is no warranty for the +design or for the software implementation, to the extent permitted by applicable +law. Except when otherwise stated in writing the copyright holders and/or other +parties provide SAX "as is" without warranty of any kind, either expressed or +implied, including, but not limited to, the implied warranties of +merchantability and fitness for a particular purpose. The entire risk as to the +quality and performance of SAX is with you. Should SAX prove defective, you +assume the cost of all necessary servicing, repair or correction. + +In no event unless required by applicable law or agreed to in writing will any +copyright holder, or any other party who may modify and/or redistribute SAX, be +liable to you for damages, including any general, special, incidental or +consequential damages arising out of the use or inability to use SAX (including +but not limited to loss of data or data being rendered inaccurate or losses +sustained by you or third parties or a failure of the SAX to operate with any +other programs), even if such holder or other party has been advised of the +possibility of such damages. Copyright Disclaimers -This page includes statements to that effect by David Megginson, who would have been able to claim copyright for the original work. +This page includes statements to that effect by David Megginson, who would have +been able to claim copyright for the original work. -SAX 1.0 +SAX 1.0 -Version 1.0 of the Simple API for XML (SAX), created collectively by the membership of the XML-DEV mailing list, is hereby released into the public domain. +Version 1.0 of the Simple API for XML (SAX), created collectively by the +membership of the XML-DEV mailing list, is hereby released into the public +domain. -No one owns SAX: you may use it freely in both commercial and non-commercial applications, bundle it with your software distribution, include it on a CD-ROM, list the source code in a book, mirror the documentation at your own web site, or use it in any other way you see fit. +No one owns SAX: you may use it freely in both commercial and non-commercial +applications, bundle it with your software distribution, include it on a CD-ROM, +list the source code in a book, mirror the documentation at your own web site, +or use it in any other way you see fit. David Megginson, sax@megginson.com 1998-05-11 SAX 2.0 -I hereby abandon any property rights to SAX 2.0 (the Simple API for XML), and release all of the SAX 2.0 source code, compiled code, and documentation contained in this distribution into the Public Domain. SAX comes with NO WARRANTY or guarantee of fitness for any purpose. +I hereby abandon any property rights to SAX 2.0 (the Simple API for XML), and +release all of the SAX 2.0 source code, compiled code, and documentation +contained in this distribution into the Public Domain. SAX comes with NO +WARRANTY or guarantee of fitness for any purpose. David Megginson, david@megginson.com 2000-05-05 -%% The following software may be included in this product: Cryptix; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: Cryptix; Use of any +of this software is governed by the terms of the license below: + Cryptix General License Copyright © 1995-2003 The Cryptix Foundation Limited. All rights reserved. -Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions aremet: - -1.Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. -2.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -THIS SOFTWARE IS PROVIDED BY THE CRYPTIX FOUNDATION LIMITED AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE CRYPTIX FOUNDATION LIMITED OR CONTRIBUTORS BELIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOTLIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE. - -%% The following software may be included in this product: W3C XML Schema Test Collection; Use of any of this software is governed by the terms of the license below: -W3C® DOCUMENT NOTICE AND LICENSE -Copyright © 1994-2002 World Wide Web Consortium, (Massachusetts Institute ofTechnology, Institut National de Recherche en Informatique et en Automatique,Keio University). All Rights Reserved. -http://www.w3.org/Consortium/Legal/ - -Public documents on the W3C site are provided by the copyright holders under thefollowing license. The software or Document Type Definitions (DTDs) associatedwith W3C specifications are governed by the Software Notice. By using and/orcopying this document, or the W3C document from which this statement is linked,you (the licensee) agree that you have read, understood, and will comply withthe following terms and conditions: - -Permission to use, copy, and distribute the contents of this document, or theW3C document from which this statement is linked, in any medium for any purposeand without fee or royalty is hereby granted, provided that you include thefollowing on ALL copies of the document, or portions thereof, that you use: - 1. A link or URL to the original W3C document. - 2. The pre-existing copyright notice of the original author, or if it doesn'texist, a notice of the form: "Copyright © [$date-of-document] World Wide WebConsortium, (Massachusetts Institute of Technology, Institut National deRecherche en Informatique et en Automatique, Keio University). All RightsReserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but atextual representation is permitted.) - 3. If it exists, the STATUS of the W3C document. - -When space permits, inclusion of the full text of this NOTICE should beprovided. We request that authorship attribution be provided in any software,documents, or other items or products that you create pursuant to the -implementation of the contents of this document, or any portion thereof. -No right to create modifications or derivatives of W3C documents is grantedpursuant to this license. However, if additional requirements (documented in theCopyright FAQ) are satisfied, the right to create modifications or derivativesis sometimes granted by the W3C to individuals complying with those requirements. -THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. -COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: -The name and trademarks of copyright holders may NOT be used in advertising orpublicity pertaining to this document or its contents without specific, writtenprior permission. Title to copyright in this document will at all times remainwith copyright holders. +1.Redistributions of source code must retain the copyright notice, this list of +conditions and the following disclaimer. ----------------------------------------------------------------------------- -This formulation of W3C's notice and license became active on April 05 1999 soas to account for the treatment of DTDs, schema's and bindings. See the olderformulation for the policy prior to this date. Please see our Copyright FAQ forcommon questions about using materials from our site, including specific termsand conditions for packages like libwww, Amaya, and Jigsaw. Other questionsabout this notice can be directed to site-policy@w3.org. -webmaster -(last updated by reagle on 1999/04/99.) - -%% The following software may be included in this product: Stax API; Use of any of this software is governed by the terms of the license below: -Streaming API for XML (JSR-173) Specification -Reference Implementation -License Agreement - -READ THE TERMS OF THIS (THE "AGREEMENT") CAREFULLY BEFORE VIEWING OR USING THESOFTWARE LICENSED HEREUNDER. BY VIEWING OR USING THE SOFTWARE, YOU AGREE TO THE TERMS OF THISAGREEMENT. IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, INDICATE YOUR ACCEPTANCE OF THESETERMS BY SELECTING THE "ACCEPT" BUTTON AT THE END OF THIS AGREEMENT. IF YOU DO NOT AGREE TOALL THESE TERMS, PROMPTLY RETURN THE UNUSED SOFTWARE TO ORIGINAL CONTRIBUTOR, DEFINED HEREIN. -1.0 DEFINITIONS. +2.Redistributions in binary form must reproduce the above copyright notice, this +list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY +THE CRYPTIX FOUNDATION LIMITED AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS +ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT +SHALL THE CRYPTIX FOUNDATION LIMITED OR CONTRIBUTORS BELIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOTLIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE. -1.1. "BEA" means BEA Systems, Inc., the licensor of the Original Code. -1.2. "Contributor" means BEA and each entity that creates or contributes to thecreation of Modifications. +%% The following software may be included in this product: W3C XML Schema Test +Collection; Use of any of this software is governed by the terms of the license +below: -1.3. "Covered Code" means the Original Code or Modifications or the combinationof the Original Code and Modifications, in each case including portions thereof and corresponding documentation released with the source code. +W3C DOCUMENT NOTICE AND LICENSE -1.4. "Executable" means Covered Code in any form other than Source Code. -1.5. "FCS" means first commercial shipment of a product. +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. -1.6. "Modifications" means any addition to or deletion from the substance orstructure of either the Original Code or any previous Modifications. When Covered Code isreleased as a series of files, a Modification is: +http://www.w3.org/Consortium/Legal/ -(a) Any addition to or deletion from the contents of a file containing OriginalCode or previous Modifications. +Public documents on the W3C site are provided by the copyright holders under the +following license. The software or Document Type Definitions (DTDs) associated +with W3C specifications are governed by the Software Notice. By using and/or +copying this document, or the W3C document from which this statement is +linked,you (the licensee) agree that you have read, understood, and will comply +with the following terms and conditions: + +Permission to use, copy, and distribute the contents of this document, or theW3C +document from which this statement is linked, in any medium for any purpose and +without fee or royalty is hereby granted, provided that you include the +following on ALL copies of the document, or portions thereof, that you use: + +1. A link or URL to the original W3C document. +2. The pre-existing copyright notice of the original author, or if it doesn't +exist, a notice of the form: "Copyright [$date-of-document] World Wide Web +Consortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but a +textual representation is permitted.) +3. If it exists, the STATUS of the W3C document. + +When space permits, inclusion of the full text of this NOTICE should be +provided. We request that authorship attribution be provided in any +software,documents, or other items or products that you create pursuant to the +implementation of the contents of this document, or any portion thereof. -(b) Any new file that contains any part of the Original Code or previousModifications. +No right to create modifications or derivatives of W3C documents is granted +pursuant to this license. However, if additional requirements (documented in +the Copyright FAQ) are satisfied, the right to create modifications or +derivatives is sometimes granted by the W3C to individuals complying with those +requirements. -1.7. "Original Code" means Source Code of computer software code ReferenceImplementation. +THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO +REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, +NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR +ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY +THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. -1.8. "Patent Claims" means any patent claim(s), now owned or hereafter acquired,including without limitation, method, process, and apparatus claims, in any patent for whichthe grantor has the right to grant a license. +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE +PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. -1.9. "Reference Implementation" means the prototype or "proof of concept"implementaÂtion of the Specification developed and made available for license by or on behalf of BEA. -1.10. "Source Code" means the preferred form of the Covered Code for makingmodifications to it, including all modules it contains, plus any associated documentation,interface definition files, scripts used to control compilation and installation of an Executable, orsource code differential comparisons against either the Original Code or another well known,available Covered Code of the Contributor's choice. +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to this document or its contents without specific, written +prior permission. Title to copyright in this document will at all times remain +with copyright holders. -1.11. "Specification" means the written specification for the Streaming API forXML , Java technology developed pursuant to the Java Community Process. -1.12. "Technology Compatibility Kit" or "TCK" means the documentation, testingtools and test suites associated with the Specification as may be revised by BEA from time totime, that is provided so that an implementer of the SpecifiÂcation may determine if itsimplementation is compliant with the Specification. +---------------------------------------------------------------------------- -1.13. "You" (or "Your") means an individual or a legal entity exercising rightsunder, and complying with all of the terms of, this Agreement or a future version of thisAgreement issued under Section 6.1. For legal entities, "You" includes any entity which controls,is controlled by, or is under common control with You. For purposes of this definition,"control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of theoutstanding shares or beneficial ownership of such entity. +This formulation of W3C's notice and license became active on April 05 1999 so +as to account for the treatment of DTDs, schema's and bindings. See the older +formulation for the policy prior to this date. Please see our Copyright FAQ for +common questions about using materials from our site, including specific terms +and conditions for packages like libwww, Amaya, and Jigsaw. Other questions +about this notice can be directed to site-policy@w3.org. webmaster (last +updated by reagle on 1999/04/99.) -2.0 SOURCE CODE LICENSE. +%% The following software may be included in this product: Stax API; Use of any +of this software is governed by the terms of the license below: -2.1. Copyright Grant. Subject to the terms of this Agreement, each Contributorhereby grants You a non-exclusive, worldwide, royalty-free copyright license to reproduce,prepare derivative works of, publicly display, publicly perform, distribute and sublicense theCovered Code of such Contributor, if any, and such derivative works, in Source Code andExecutable form. +Streaming API for XML (JSR-173) Specification +Reference Implementation +License Agreement -2.2. Patent Grant. Subject to the terms of this Agreement, each Contributorhereby grants You a non-exclusive, worldwide, royalty-free patent license under the PatentClaims to make, use, sell, offer to sell, import and otherwise transfer the Covered Code preparedand provided by such Contributor, if any, in Source Code and Executable form. This patentlicense shall apply to the Covered Code if, at the time a Modification is added by the Contributor,such addition of the Modification causes such combination to be covered by the Patent Claims.The patent license shall not apply to any other combinations which include the Modification. -2.3. Conditions to Grants. You understand that although each Contributorgrants the licenses to the Covered Code prepared by it, no assurances are provided by anyContributor that the Covered Code does not infringe the patent or other intellectual property rights ofany other entity. Each Contributor disclaims any liability to You for claims brought by anyother entity based on infringement of intellectual property rights or otherwise. As a conditionto exercising the rights and licenses granted hereunder, You hereby assume sole responsibility to secure any other intellectual property rights needed, if any. For example, if a thirdparty patent license is required to allow You to distribute Covered Code, it is Your responsibility to acquire that license before distributing such code. +READ THE TERMS OF THIS (THE "AGREEMENT") CAREFULLY BEFORE VIEWING OR USING +THESOFTWARE LICENSED HEREUNDER. BY VIEWING OR USING THE SOFTWARE, YOU AGREE TO +THE TERMS OF THISAGREEMENT. IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, +INDICATE YOUR ACCEPTANCE OF THESETERMS BY SELECTING THE "ACCEPT" BUTTON AT THE +END OF THIS AGREEMENT. IF YOU DO NOT AGREE TOALL THESE TERMS, PROMPTLY RETURN +THE UNUSED SOFTWARE TO ORIGINAL CONTRIBUTOR, DEFINED HEREIN. -2.4. Contributors' Representation. Each Contributor represents that to itsknowledge it has sufficient copyright rights in the Covered Code it provides , if any, to grantthe copyright license set forth in this Agreement. +1.0 DEFINITIONS. -3.0 DISTRIBUION RESTRICTIONS. +1.1. "BEA" means BEA Systems, Inc., the licensor of the Original Code. -3.1. Application of Agreement. +1.2. "Contributor" means BEA and each entity that creates or contributes to the +creation of Modifications. -The Modifications which You create or to which You contribute are governed bythe terms of this Agreement, including without limitation Section 2.0. The Source Code versionof Covered Code may be distributed only under the terms of this Agreement or a future versionof this Agreement released under Section 6.1, and You must include a copy of this Agreementwith every copy of the Source Code You distribute. You may not offer or impose any terms on anySource Code version that alters or restricts the applicable version of this Agreement or therecipients' rights hereunder. However, You may include an additional document offering theadditional rights described in Section 3.3. +1.3. "Covered Code" means the Original Code or Modifications or the combination +of the Original Code and Modifications, in each case including portions thereof +and corresponding documentation released with the source code. -3.2. Description of Modifications. +1.4. "Executable" means Covered Code in any form other than Source Code. -You must cause all Covered Code to which You contribute to contain a filedocumenting the changes You made to create that Covered Code and the date of any change. You mustinclude a prominent statement that the Modification is derived, directly or indirectly, fromOriginal Code provided by BEA and including the name of BEA in (a) the Source Code, and (b) inany notice in an Executable version or related documentation in which You describe the origin orownership ofthe Covered Code. +1.5. "FCS" means first commercial shipment of a product. -%% The following software may be included in this product: X Window System; Use of any of this software is governed by the terms of the license below: -Copyright The Open Group +1.6. "Modifications" means any addition to or deletion from the substance or +structure of either the Original Code or any previous Modifications. When +Covered Code is released as a series of files, a Modification is: -Permission to use, copy, modify, distribute, and sell this software and itsdocumentation for any purpose is hereby granted without fee, provided that theabove copyright notice appear in all copies and that both that copyright noticeand this permission notice appear in supporting documentation. +(a) Any addition to or deletion from the contents of a file containing Original +Code or previous Modifications. -The above copyright notice and this permission notice shall be included in allcopies or substantial portions of the Software. +(b) Any new file that contains any part of the Original Code or previous +Modifications. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN GROUPBE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OFCONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THESOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +1.7. "Original Code" means Source Code of computer software code Reference +Implementation. -Except as contained in this notice, the name of The Open Group shall not be usedin advertising or otherwise to promote the sale, use or other dealings in thisSoftware without prior written authorization from The Open Group. +1.8. "Patent Claims" means any patent claim(s), now owned or hereafter +acquired,including without limitation, method, process, and apparatus claims, in +any patent for which the grantor has the right to grant a license. -Portions also covered by other licenses as noted in the above URL. +1.9. "Reference Implementation" means the prototype or "proof of +concept"implementation of the Specification developed and made available for +license by or on behalf of BEA. -%% The following software may be included in this product: dom4j v. 1.6; Use of any of this software is governed by the terms of the license below: -Redistribution and use of this software and associated documentation -("Software"), with or without modification, are permitted provided that thefollowing conditions are met: +1.10. "Source Code" means the preferred form of the Covered Code for making +modifications to it, including all modules it contains, plus any associated +documentation,interface definition files, scripts used to control compilation +and installation of an Executable, or source code differential comparisons +against either the Original Code or another well known,available Covered Code of +the Contributor's choice. - 1. Redistributions of source code must retain copyright statements andnotices. Redistributions must also contain a copy of this document. - 2. Redistributions in binary form must reproduce the above copyright notice,this list of conditions and the following disclaimer in the documentation and/orother materials provided with the distribution. - 3. The name "DOM4J" must not be used to endorse or promote products derivedfrom this Software without prior written permission of MetaStuff, Ltd. Forwritten permission, please contact dom4j-info@metastuff.com. - 4. Products derived from this Software may not be called "DOM4J" nor may"DOM4J" appear in their names without prior written permission of MetaStuff,Ltd. DOM4J is a registered trademark of MetaStuff, Ltd. - 5. Due credit should be given to the DOM4J Project - http://www.dom4j.org -THIS SOFTWARE IS PROVIDED BY METASTUFF, LTD. AND CONTRIBUTORS ``AS IS'' AND ANYEXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED. IN NO EVENT SHALL METASTUFF, LTD. OR ITS CONTRIBUTORS BE LIABLE FORANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +1.11. "Specification" means the written specification for the Streaming API for +XML , Java technology developed pursuant to the Java Community Process. -Copyright 2001-2005 (C) MetaStuff, Ltd. All Rights Reserved. +1.12. "Technology Compatibility Kit" or "TCK" means the documentation, testing +tools and test suites associated with the Specification as may be revised by BEA +from time to time, that is provided so that an implementer of the Specification +may determine if its implementation is compliant with the Specification. -%% The following software may be included in this product: Retroweaver; Use of any of this software is governed by the terms of the license below: -Copyright (c) February 2004, Toby Reyelts -All rights reserved. +1.13. "You" (or "Your") means an individual or a legal entity exercising rights +under, and complying with all of the terms of, this Agreement or a future +version of this Agreement issued under Section 6.1. For legal entities, "You" +includes any entity which controls,is controlled by, or is under common control +with You. For purposes of this definition,"control" means (a) the power, direct +or indirect, to cause the direction or management of such entity, whether by +contract or otherwise, or (b) ownership of more than fifty percent (50%) of the +outstanding shares or beneficial ownership of such entity. -Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: +2.0 SOURCE CODE LICENSE. -Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. -Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -Neither the name of Toby Reyelts nor the names of his contributors may be used to endorse or promote products derived from this software without specific prior written permission. +2.1. Copyright Grant. Subject to the terms of this Agreement, each Contributor +hereby grants You a non-exclusive, worldwide, royalty-free copyright license to +reproduce,prepare derivative works of, publicly display, publicly perform, +distribute and sublicense the Covered Code of such Contributor, if any, and such +derivative works, in Source Code and Executable form. + +2.2. Patent Grant. Subject to the terms of this Agreement, each Contributor +hereby grants You a non-exclusive, worldwide, royalty-free patent license under +the Patent Claims to make, use, sell, offer to sell, import and otherwise +transfer the Covered Code prepared and provided by such Contributor, if any, in +Source Code and Executable form. This patent license shall apply to the Covered +Code if, at the time a Modification is added by the Contributor,such addition of +the Modification causes such combination to be covered by the Patent Claims. +The patent license shall not apply to any other combinations which include the +Modification. + +2.3. Conditions to Grants. You understand that although each Contributor +grants the licenses to the Covered Code prepared by it, no assurances are +provided by any Contributor that the Covered Code does not infringe the patent +or other intellectual property rights of any other entity. Each Contributor +disclaims any liability to You for claims brought by any other entity based on +infringement of intellectual property rights or otherwise. As a condition to +exercising the rights and licenses granted hereunder, You hereby assume sole +responsibility to secure any other intellectual property rights needed, if any. +For example, if a thirdparty patent license is required to allow You to +distribute Covered Code, it is Your responsibility to acquire that license +before distributing such code. + +2.4. Contributors' Representation. Each Contributor represents that to its +knowledge it has sufficient copyright rights in the Covered Code it provides , +if any, to grant the copyright license set forth in this Agreement. -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +3.0 DISTRIBUION RESTRICTIONS. -%% The following software may be included in this product: stripper; Use of any of this software is governed by the terms of the license below: -Stripper : debug information stripper -Copyright (c) 2003 Kohsuke Kawaguchi -All rights reserved. +3.1. Application of Agreement. -Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -3. Neither the name of the copyright holders nor the names of its contributors may be used to endorse or promote products derived fromthis software without specific prior written permission. +The Modifications which You create or to which You contribute are governed by +the terms of this Agreement, including without limitation Section 2.0. The +Source Code version of Covered Code may be distributed only under the terms of +this Agreement or a future version of this Agreement released under Section 6.1, +and You must include a copy of this Agreement with every copy of the Source Code +You distribute. You may not offer or impose any terms on any Source Code +version that alters or restricts the applicable version of this Agreement or the +recipients' rights hereunder. However, You may include an additional document +offering the additional rights described in Section 3.3. + +3.2. Description of Modifications. + +You must cause all Covered Code to which You contribute to contain a file +documenting the changes You made to create that Covered Code and the date of any +change. You must include a prominent statement that the Modification is +derived, directly or indirectly, from Original Code provided by BEA and +including the name of BEA in (a) the Source Code, and (b) in any notice in an +Executable version or related documentation in which You describe the origin or +ownership of the Covered Code. + +%% The following software may be included in this product: X Window System; Use +of any of this software is governed by the terms of the license below: +Copyright The Open Group + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that the +above copyright notice appear in all copies and that both that copyright notice +and this permission notice appear in supporting documentation. + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN +GROUPBE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +OFCONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH +THESOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of The Open Group shall not be used +in advertising or otherwise to promote the sale, use or other dealings in this +Software without prior written authorization from The Open Group. -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +Portions also covered by other licenses as noted in the above URL. +%% The following software may be included in this product: dom4j v. 1.6; Use +of any of this software is governed by the terms of the license below: -%% The following software may be included in this product: libpng official PNG reference library; Use of any of this software is governed by the terms of the license below: -This copy of the libpng notices is provided for your convenience. In case ofany discrepancy between this copy and the notices in the file png.h that isincluded in the libpng distribution, the latter shall prevail. +Redistribution and use of this software and associated documentation +("Software"), with or without modification, are permitted provided that the +following conditions are met: + +1. Redistributions of source code must retain copyright statements and notices +Redistributions must also contain a copy of this document. + +2. Redistributions in binary form must reproduce the above copyright +notice,this list of conditions and the following disclaimer in the documentation +and/or other materials provided with the distribution. + +3. The name "DOM4J" must not be used to endorse or promote products derived +from this Software without prior written permission of MetaStuff, Ltd. For +written permission, please contact dom4j-info@metastuff.com. + +4. Products derived from this Software may not be called "DOM4J" nor may"DOM4J" +appear in their names without prior written permission of MetaStuff,Ltd. DOM4J +is a registered trademark of MetaStuff, Ltd. + +5. Due credit should be given to the DOM4J Project - http://www.dom4j.org + +THIS SOFTWARE IS PROVIDED BY METASTUFF, LTD. AND CONTRIBUTORS ``AS IS'' AND +ANYEXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +AREDISCLAIMED. IN NO EVENT SHALL METASTUFF, LTD. OR ITS CONTRIBUTORS BE LIABLE +FORANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +Copyright 2001-2005 (C) MetaStuff, Ltd. All Rights Reserved. + +%% The following software may be included in this product: Retroweaver; Use of +any of this software is governed by the terms of the license below: + +Copyright (c) February 2004, Toby Reyelts All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +Redistributions of source code must retain the above copyright notice, this list +of conditions and the following disclaimer. Redistributions in binary form must +reproduce the above copyright notice, this list of conditions and the following +disclaimer in the documentation and/or other materials provided with the +distribution. Neither the name of Toby Reyelts nor the names of his +contributors may be used to endorse or promote products derived from this +software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: stripper; Use of any +of this software is governed by the terms of the license below: + +Stripper : debug information stripper Copyright (c) 2003 Kohsuke Kawaguchi All +rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. Neither the name of the copyright holders nor the names of its contributors +may be used to endorse or promote products derived from this software without +specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +%% The following software may be included in this product: libpng official PNG +reference library; Use of any of this software is governed by the terms of the +license below: + +This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail. COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: -If you modify libpng you may insert additional notices immediately followingthis sentence. +If you modify libpng you may insert additional notices immediately following +this sentence. -libpng version 1.2.6, December 3, 2004, is Copyright (c) 2004 Glenn Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5with the following individual added to the list of Contributing Authors - Cosmin Truta +libpng version 1.2.6, December 3, 2004, is Copyright (c) 2004 Glenn + Randers-Pehrson, and is distributed according to the same disclaimer and + license as libpng-1.2.5with the following individual added to the list of + Contributing Authors Cosmin Truta -libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors - Simon-Pierre Cadieux - Eric S. Raymond - Gilles Vollant +libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are + Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according + to the same disclaimer and license as libpng-1.0.6 with the following + individuals added to the list of Contributing Authors Simon-Pierre Cadieux + Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: - There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user. +There is no warranty against interference with your enjoyment of the library or +against infringement. There is no warranty that our efforts or the library will +fulfill any of your particular purposes or needs. This library is provided with +all faults, and the entire risk of satisfactory quality, performance, accuracy, +and effort is with the user. -libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, areCopyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96,with the following individuals added to the list of Contributing Authors: - Tom Lane - Glenn Randers-Pehrson +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright + (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the + same disclaimer and license as libpng-0.96,with the following individuals + added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik -libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger -Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: - John Bowler - Kevin Bracey - Sam Bushell - Magnus Holmgren - Greg Roelofs - Tom Tanner +libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, +1997 Andreas Dilger Distributed according to the same disclaimer and license as +libpng-0.88, with the following individuals added to the list of Contributing +Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom +Tanner -libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. +libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) +1995, 1996 Guy Eric Schalnat, Group 42, Inc. -For the purposes of this copyright and license, "Contributing Authors"is defined as the following set of individuals: +For the purposes of this copyright and license, "Contributing Authors"is defined +as the following set of individuals: Andreas Dilger Dave Martindale @@ -653,46 +1488,77 @@ For the purposes of this copyright and license, "Contributing Authors"is defined Paul Schmidt Tim Wegner -The PNG Reference Library is supplied "AS IS". The Contributing Authorsand Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and offitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary,or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. +The PNG Reference Library is supplied "AS IS". The Contributing Authors and +Group 42, Inc. disclaim all warranties, expressed or implied, including, +without limitation, the warranties of merchantability and of fitness for any +purpose. The Contributing Authors and Group 42, Inc. assume no liability for +direct, indirect, incidental, special, exemplary,or consequential damages, which +may result from the use of the PNG Reference Library, even if advised of the +possibility of such damage. -Permission is hereby granted to use, copy, modify, and distribute thissource code, or portions hereof, for any purpose, without fee, subjectto the following restrictions: +Permission is hereby granted to use, copy, modify, and distribute this source +code, or portions hereof, for any purpose, without fee, subject to the following +restrictions: -1. The origin of this source code must not be misrepresented. +1. The origin of this source code must not be misrepresented. -2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. +2. Altered versions must be plainly marked as such and must not be +misrepresented as being the original source. -3. This Copyright notice may not be removed or altered from any source or altered source distribution. +3. This Copyright notice may not be removed or altered from any source or +altered source distribution. -The Contributing Authors and Group 42, Inc. specifically permit, withoutfee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use thissource code in a product, acknowledgment is not required but would be appreciated. +The Contributing Authors and Group 42, Inc. specifically permit, without fee, +and encourage the use of this source code as a component to supporting the PNG +file format in commercial products. If you use this source code in a product, +acknowledgment is not required but would be appreciated. -A "png_get_copyright" function is available, for convenient use in "about"boxes and the like: +A "png_get_copyright" function is available, for convenient use in "about"boxes +and the like: printf("%s",png_get_copyright(NULL)); -Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). +Also, the PNG logo (in PNG format, of course) is supplied in the files +"pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). -Libpng is OSI Certified Open Source Software. OSI Certified Open Source is acertification mark of the Open Source Initiative. +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a +certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net December 3, 2004 -%% The following software may be included in this product: Libungif - An uncompressed GIF library; Use of any of this software is governed by the terms of the license below: -The GIFLIB distribution is Copyright (c) 1997 Eric S. Raymond +%% The following software may be included in this product: Libungif - An +uncompressed GIF library; Use of any of this software is governed by the terms +of the license below: +The GIFLIB distribution is Copyright (c) 1997 Eric S.Raymond -Permission is hereby granted, free of charge, to any person obtaining a copyof this software and associated documentation files (the "Software"), to dealin the Software without restriction, including without limitation the rightsto use, copy, modify, merge, publish, distribute, sublicense, and/or sellcopies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: -The above copyright notice and this permission notice shall be included inall copies or substantial portions of the Software. +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THEAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHERLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS INTHE SOFTWARE. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO +EVENT SHALL THEAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHERLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM,OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +INTHE SOFTWARE. -%% The following software may be included in this product: Ant; Use of any of this software is governed by the terms of the license below: -License -The Apache Software License Version 2.0 +%% The following software may be included in this product: Ant; Use of any of +this software is governed by the terms of the license below: License The Apache +Software License Version 2.0 -The Apache Software License Version 2.0 applies to all releases of Ant startingwith ant 1.6.1 +The Apache Software License Version 2.0 applies to all releases of Ant starting +with ant 1.6.1 /* * Apache License @@ -911,17 +1777,20 @@ The License is accompanied by a NOTICE This product includes software developed by The Apache Software Foundation (http://www.apache.org/). - This product includes also software developed by : - - the W3C consortium (http://www.w3c.org) , - - the SAX project (http://www.saxproject.org) +This product includes also software developed by : - the W3C consortium + (http://www.w3c.org) , - the SAX project (http://www.saxproject.org) - Please read the different LICENSE files present in the root directory of this distribution. +Please read the different LICENSE files present in the root directory of this +distribution. - The names "Ant" and "Apache Software Foundation" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. +The names "Ant" and "Apache Software Foundation" must not be used to endorse or +promote products derived from this software without prior written permission. +For written permission, please contact apache@apache.org. The Apache Software License, Version 1.1 -The Apache Software License, Version 1.1, applies to all versions of up to ant1.6.0 included. +The Apache Software License, Version 1.1, applies to all versions of up to +ant1.6.0 included. /* * ============================================================================ @@ -974,89 +1843,233 @@ The Apache Software License, Version 1.1, applies to all versions of up to ant1. */ -%% The following software may be included in this product: XML Resolver library; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: XML Resolver +library; Use of any of this software is governed by the terms of the license +below: + Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ - TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - - 1. Definitions. - - "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. - - "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. - - "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. - - "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. - - "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. - - "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. +TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). + 1. Definitions. - "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. - - "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." - - "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. - - 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. - - 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. - - 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: - - (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. - (b) You must cause any modified files to carry prominent notices stating that You changed the files; and + "Licensor" shall mean the copyright owner or entity authorized by the + copyright owner that is granting the License. - (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and + "Legal Entity" shall mean the union of the acting entity and all other + entities that control, are controlled by, or are under common control + with that entity. For the purposes of this definition, "control" means + (i) the power, direct or indirect, to cause the direction or management + of such entity, whether by contract or otherwise, or (ii) ownership of + fifty percent (50%) or more of the outstanding shares, or + (iii) beneficial ownership of such entity. - (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or -documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. + "You" (or "Your") shall mean an individual or Legal Entity exercising + permissions granted by this License. - You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation source, + and configuration files. - 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. + "Object" form shall mean any form resulting from mechanical transformation + or translation of a Source form, including but not limited to compiled + object code, generated documentation, and conversions to other media types. - 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. + "Work" shall mean the work of authorship, whether in Source or Object + form, made available under the License, as indicated by a copyright + notice that is included in or attached to the work (an example is + provided in the Appendix below). - 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces + of, the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including the original + version of the Work and any modifications or additions to that Work or + Derivative Works thereof, that is intentionally submitted to Licensor + for inclusion in the Work by the copyright owner or by an individual + or Legal Entity authorized to submit on behalf of the copyright owner. + For the purposes of this definition, "submitted" means any form of + electronic, verbal, or written communication sent to the Licensor or + its representatives, including but not limited to communication on + electronic mailing lists, source code control systems, and issue + tracking systems that are managed by, or on behalf of, the Licensor + for the purpose of discussing and improving the Work, but excluding + communication that is conspicuously marked or otherwise designated + in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. - 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright + license to reproduce, prepare Derivative Works of, publicly display, + publicly perform, sublicense, and distribute the Work and such + Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of this + License, each Contributor hereby grants to You a perpetual, worldwide, + non-exclusive, no-charge, royalty-free, irrevocable (except as stated + in this section) patent license to make, have made, use, offer to sell, + sell, import, and otherwise transfer the Work, where such license + applies only to those patent claims licensable by such Contributor + that are necessarily infringed by their Contribution(s) alone or by + combination of their Contribution(s) with the Work to which such + Contribution(s) was submitted. If You institute patent litigation + against any entity (including a cross-claim or counterclaim in a + lawsuit) alleging that the Work or a Contribution incorporated within + the Work constitutes direct or contributory patent infringement, then + any patent licenses granted to You under this License for that Work + shall terminate as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the Work + or Derivative Works thereof in any medium, with or without modifications, + and in Source or Object form, provided that You meet the following + conditions: + + (a) You must give any other recipients of the Work or Derivative Works + a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works that + You distribute, all copyright, patent, trademark, and attribution notices + from the Source form of the Work, excluding those notices that do not + pertain to any part of the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its distribution, + then any Derivative Works that You distribute must include a readable copy + of the attribution notices contained within such NOTICE file, excluding + those notices that do not pertain to any part of the Derivative Works, in + at least one of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or documentation, + if provided along with the Derivative Works; or, within a display generated + by the Derivative Works, if and wherever such third-party notices normally + appear. The contents of the NOTICE file are for informational purposes only + and do not modify the License. You may add Your own attribution notices + within Derivative Works that You distribute, alongside or as an addendum to + the NOTICE text from the Work, provided that such additional attribution + notices cannot be construed as modifying the License. + + You may add Your own copyright statement to Your modifications and may provide + additional or different license terms and conditions for use, reproduction, + or distribution of Your modifications, or for any such Derivative Works as a + whole, provided Your use, reproduction, and distribution of the Work otherwise + complies with the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, any + Contribution intentionally submitted for inclusion in the Work by You to + the Licensor shall be under the terms and conditions of this License, without + any additional terms or conditions. Notwithstanding the above, nothing herein + shall supersede or modify the terms of any separate license agreement you may + have executed with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade names, + trademarks, service marks, or product names of the Licensor, except as required + for reasonable and customary use in describing the origin of the Work and + reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in + writing, Licensor provides the Work (and each Contributor provides its + Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF + ANY KIND, either express or implied, including, without limitation, any + warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or + FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining + the appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. - 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. + 8. Limitation of Liability. In no event and under no legal theory, whether + in tort (including negligence), contract, or otherwise, unless required by + applicable law (such as deliberate and grossly negligent acts) or agreed to + in writing, shall any Contributor be liable to You for damages, including + any direct, indirect, special, incidental, or consequential damages of any + character arising as a result of this License or out of the use or inability + to use the Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all other + commercial damages or losses), even if such Contributor has been advised + of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing the Work + or Derivative Works thereof, You may choose to offer, and charge a fee for, + acceptance of support, warranty, indemnity, or other liability obligations + and/or rights consistent with this License. However, in accepting such + obligations, You may act only on Your own behalf and on Your sole + responsibility, not on behalf of any other Contributor, and only if You + agree to indemnify, defend, and hold each Contributor harmless for any + liability incurred by, or claims asserted against, such Contributor by + reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. - To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives. + To apply the Apache License to your work, attach the following boilerplate notice, + with the fields enclosed by brackets "[]" replaced with your own identifying + information. (Don't include the brackets!) The text should be enclosed in the + appropriate comment syntax for the file format. We also recommend that a file + or class name and description of purpose be included on the same "printed page" + as the copyright notice for easier identification within third-party archives. Copyright [yyyy] [name of copyright owner] - Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at + Licensed under the Apache License, Version 2.0 (the "License"); you may not use + this file except in compliance with the License. You may obtain a copy of the + License at http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. + Unless required by applicable law or agreed to in writing, software distributed + under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, either express or implied. See the License for the + specific language governing permissions and limitations under the License. -%% The following software may be included in this product: ICU4J; Use of any of this software is governed by the terms of the license below: -ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Cop -yright (c) -1995-2003 International Business Machines Corporation and others All rightsreserved. Permission is hereby granted, free of charge, to any person obtaininga copy of this software and associated documentation files (the "Software"), todeal in the Software without restriction, including without limitation therights to use, copy, modify, merge, publish, distribute, and/or sell copies ofthe Software, and to permit persons to whom the Software is furnished to do so,provided that the above copyright notice(s) and this permission notice appear inall copies of the Software and that both the above copyright notice(s) and thispermission notice appear in supporting documentation. THE SOFTWARE IS PROVIDED"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOTLIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSEAND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANYSPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTINGFROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCEOR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE ORPERFORMANCE OF THIS SOFTWARE. Except as contained in this notice, the name of acopyright holder shall not be used in advertising or otherwise to promote thesale, use or other dealings in this Software without prior written authorizationof the copyright holder. +%% The following software may be included in this product: ICU4J; Use of any of +this software is governed by the terms of the license below: +ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright (c) + +1995-2003 International Business Machines Corporation and others All rights + reserved Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the "Software"), to + deal in the Software without restriction, including without limitation the + rights to use, copy, modify, merge, publish, distribute, and/or sell copies of + the Software, and to permit persons to whom the Software is furnished to do + so,provided that the above copyright notice(s) and this permission notice + appear in all copies of the Software and that both the above copyright + notice(s) and this permission notice appear in supporting documentation. THE + SOFTWARE IS PROVIDED"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + INCLUDING BUT NOTLIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + PARTICULAR PURPOSEAND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL + THE COPYRIGHTHOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, + OR ANYSPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER + RESULTINGFROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, + NEGLIGENCEOR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE + USE ORPERFORMANCE OF THIS SOFTWARE. Except as contained in this notice, the + name of a copyright holder shall not be used in advertising or otherwise to + promote the sale, use or other dealings in this Software without prior written + authorization of the copyright holder. + + +%% The following software may be included in this product: NekoHTML; Use of any +of this software is governed by the terms of the license below: The CyberNeko +Software License, Version 1.0 -%% The following software may be included in this product: NekoHTML; Use of any of this software is governed by the terms of the license below: -The CyberNeko Software License, Version 1.0 - (C) Copyright 2002,2003, Andy Clark. All rights reserved. - + Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: @@ -1084,28 +2097,55 @@ are met: nor may "CyberNeko" appear in their name, without prior written permission of the author. -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR OTHER CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +OR OTHER CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT +OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING +IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. ==================================================================== This license is based on the Apache Software License, version 1.1 -%% The following software may be included in this product: Jing; Use of any of this software is governed by the terms of the license below: -Jing Copying Conditions - -Copyright (c) 2001-2003 Thai Open Source Software Center Ltd -All rights reserved. - -Redistribution and use in source and binary forms, with or without modification,are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice,this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright notice,this list of conditions and the following disclaimer in the documentation and/orother materials provided with the distribution. - * Neither the name of the Thai Open Source Software Center Ltd nor the namesof its contributors may be used to endorse or promote products derived from thissoftware without specific prior written permission. +%% The following software may be included in this product: Jing; Use of any of +this software is governed by the terms of the license below: Jing Copying +Conditions -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ANDANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +Copyright (c) 2001-2003 Thai Open Source Software Center Ltd All rights +reserved. +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice,this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + * Neither the name of the Thai Open Source Software Center Ltd nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +ANDANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +AREDISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR +ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +%% The following software may be included in this product: RelaxNGCC; Use of +any of this software is governed by the terms of the license below: -%% The following software may be included in this product: RelaxNGCC; Use of any of this software is governed by the terms of the license below: Copyright (c) 2000-2003 Daisuke Okajima and Kohsuke Kawaguchi. All rights reserved. @@ -1138,624 +2178,235 @@ holders. nor may "RELAXNGCC" appear in their name, without prior written permission of the copyright holders. -THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, -OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -%% The following software may be included in this product: RELAX NG Object Model/Parser; Use of any of this software is governed by the terms of the license below: -The MIT License +THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: RELAX NG Object +Model/Parser; Use of any of this software is governed by the terms of the +license below: The MIT License Copyright (c) -Permission is hereby granted, free of charge, to any person obtaining a copy ofthis software and associated documentation files (the "Software"), to deal inthe Software without restriction, including without limitation the rights touse, copy, modify, merge, publish, distribute, sublicense, and/or sell copies ofthe Software, and to permit persons to whom the Software is furnished to do so,subject to the following conditions: +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do +so,subject to the following conditions: -The above copyright notice and this permission notice shall be included in allcopies or substantial portions of the Software. +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS ORCOPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHERIN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR INCONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS ORCOPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +WHETHERIN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR +INCONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -%% The following software may be included in this product: XFree86-VidMode Extension; Use of any of this software is governed by the terms of the license below: -Version 1.1 of ProjectLicence. +%% The following software may be included in this product: XFree86-VidMode +Extension; Use of any of this software is governed by the terms of the license +below: Version 1.1 of Project Licence. Copyright (C) 1994-2004 The Project, Inc. All rights reserved. - Permission is hereby granted, free of charge, to any person obtaining a copyof this software and associated documentation files (the "Software"), to deal inthe Software without restriction, including without limitation the rights touse, copy, modify, merge, publish, distribute, sublicence, and/or sell copies ofthe Software, and to permit persons to whom the Software is furnished to do so,subject to the following conditions: - - 1. Redistributions of source code must retain the above copyright notice,this list of conditions, and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyrightnotice, this list of conditions and the following disclaimer in the -documentation and/or other materials provided with the distribution, and in thesame place and form as other copyright, license and disclaimer information. 3. The end-user documentation included with the redistribution, if any,must include the following acknowledgment: "This product includes softwaredeveloped by The XFree86 Project, Inc (http://www.xfree86.org/) and itscontributors", in the same place and form as other third-party acknowledgments.Alternately, this acknowledgment may appear in the software itself, in the sameform and location as other such third-party acknowledgments. - 4. Except as contained in this notice, the name of The XFree86 Project,Inc shall not be used in advertising or otherwise to promote the sale, use orother dealings in this Software without prior written authorization from TheXFree86 Project, Inc. - - THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE XFREE86PROJECT, INC OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER INCONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISINGIN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITYOF SUCH DAMAGE. - - -%% The following software may be included in this product: RelaxNGCC; Use of any of this software is governed by the terms of the license below: -This is version 2003-May-08 of the Info-ZIP copyright and license. -The definitive version of this document should be available at +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicence, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do +so,subject to the following conditions: + +1. Redistributions of source code must retain the above copyright notice,this +list of conditions, and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution, and in the same place and form +as other copyright, license and disclaimer information. + +3. The end-user documentation included with the redistribution, if any,must +include the following acknowledgment: "This product includes software developed +by The XFree86 Project, Inc (http://www.xfree86.org/) and its contributors", in +the same place and form as other third-party acknowledgments. Alternately, this +acknowledgment may appear in the software itself, in the same form and location +as other such third-party acknowledgments. + +4. Except as contained in this notice, the name of The XFree86 Project,Inc +shall not be used in advertising or otherwise to promote the sale, use or other +dealings in this Software without prior written authorization from TheXFree86 +Project, Inc. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT +SHALL THE XFREE86PROJECT, INC OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL,SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER INCONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISINGIN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED +OF THE POSSIBILITYOF SUCH DAMAGE. + + +%% The following software may be included in this product: RelaxNGCC; Use of +any of this software is governed by the terms of the license below: This is +version 2003-May-08 of the Info-ZIP copyright and license. The definitive +version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely. Copyright (c) 1990-2003 Info-ZIP. All rights reserved. -For the purposes of this copyright and license, "Info-ZIP" is defined asthe following set of individuals: - - Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler, Antoine Verheijen, - Paul von Behren, Rich Wales, Mike White - -This software is provided "as is," without warranty of any kind, expressor implied. In no event shall Info-ZIP or its contributors be held liablefor any direct, indirect, incidental, special or consequential damagesarising out of the use of or inability to use this software. - -Permission is granted to anyone to use this software for any purpose, -including commercial applications, and to alter it and redistribute itfreely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright notice, definition, disclaimer, and this list of conditions. - - 2. Redistributions in binary form (compiled executables) must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution. The sole exception to this condition is redistribution of a standard UnZipSFX binary (including SFXWiz) as part of a self-extracting archive; that is permitted without inclusion of this license, as long as the normal SFX banner has not been removed from the binary or disabled. - - 3. Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, and dynamic, shared, or static library versions--must be plainly marked as such and must not be misrepresented as being the original source. Such altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names "Info-ZIP" (or any variation thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s). - 4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases. - - -%% The following software may be included in this product: XML Security; Use of any of this software is governed by the terms of the license below: - The Apache Software License, -Version 1.1 -PDF - -Copyright (C) 2002 The Apache SoftwareFoundation. -All rights reserved. Redistribution anduse in source and binary forms, with or withoutmodifica- -tion, are permitted provided that thefollowing conditions are met: -1. Redistributions ofsource code must retain the above copyrightnotice, this list of conditions and the followingdisclaimer. -2. Redistributions in binary form mustreproduce the above copyright notice, this list of conditions and the following disclaimerin the documentation and/or other materialsprovided with the distribution. -3. The end-userdocumentation included with the redistribution, if any,must include the following acknowledgment:"This product includes software developed bythe Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment mayappear in the software itself, if and wherever suchthird-party acknowledgments normally appear. -4. The names"Apache Forrest" and "Apache SoftwareFoundation" must not be used to endorse or promoteproducts -derived from this software without priorwritten permission. For written permission,please contact apache@apache.org. 5. Products derivedfrom this software may not be called "Apache", normay "Apache" appear in their name, without prior written permission of the Apache Software Foundation. -THIS SOFTWARE IS PROVIDED``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT -SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache SoftwareFoundation, please see http://www.apache.org. - - -%% The following software may be included in this product: Regexp, Regular Expression Package v. 1.2; Use of any of this software is governed by the terms of the license below: The Apache Software License, Version 1.1 -Copyright (c) 2001 The Apache Software Foundation. All rights -reserved. -Redistribution and use in source and binary forms, with or without modification,are permitted provided that the following conditions are met: - -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - -3. The end-user documentation included with the redistribution, if any, must include the following acknowledgment: -"This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. - -4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. - -5. Products derived from this software may not be called "Apache", "Apache Turbine", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation. - -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -==================================================================== -This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache Software Foundation, please see http://www.apache.org. - - -%% The following software may be included in this product: Visual Studio. Use of any of this software is governed by the terms of the license below: - -END-USER LICENSE AGREEMENT FOR MICROSOFT SOFTWARE -IMPORTANT-READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Microsoft Corporation ("Microsoft) for the Microsoft software that accompanies this EULA, which includes computer software and may include associated media, printed materials, "online" or electronic documentation, and Internet-based services ("Software"). An amendment or addendum to this EULA may accompany the Software. YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA BY INSTALLING, COPYING, OR OTHERWISE USING THE SOFTWARE. IF YOU DO NOT AGREE, DO NOT INSTALL, COPY, OR USE THE SOFTWARE; YOU MAY RETURN IT TO YOUR PLACE OF PURCHASE (IF APPLICABLE) FOR A FULL REFUND. - -MICROSOFT SOFTWARE LICENSE - -1. GRANTS OF LICENSE. Microsoft grants you the rights described in this EULA provided that you comply with all terms and conditions of this EULA. NOTE: Microsoft is not licensing to you any rights with respect to Crystal Reports for Microsoft Visual Studio .NET; your use of Crystal Reports for Microsoft Visual Studio .NET is subject to your acceptance of the terms and conditions of the enclosed (hard copy) end user license agreement from Crystal -Decisions for that product. -1.1 General License Grant. Microsoft grants to you as an individual, a personal, nonexclusive license to use the Software, and to make and use copies of the Software for the purposes of designing, developing, testing, and demonstrating your software product(s), provided that you are the only individual using the Software. If you are an entity, Microsoft grants to you a personal, nonexclusive license to use the Software, and to make and use copies of the Software, provided that for each individual using the Software within your organization, you have acquired a separate and valid license for each such individual. -1.2 Documentation. You may make and use an unlimited number of copies of any documentation, provided that such copies shall be used only for personal purposes and are not to be republished or distributed (either in hard copy or electronic form) beyond your premises. -1.3 Storage/Network Use. You may also store or install a copy of the Software on a storage device, such as a network server, used only to install or run the Software on computers used by licensed end users in accordance with Section 1.1. A single license for the Software may not be shared or used concurrently by multiple end users. -1.4 Visual Studio—Effect of EULA. As a suite of development tools and other Microsoft software programs (each such tool or software program, a "Component"), Components that you receive as part of the Software may include a separate end-user license agreement (each, a "Component EULA"). Except as provided in Section 4 ("Prerelease Code"), in the event of inconsistencies between this EULA and any Component EULA, the terms of this EULA shall control. The Software may also contain third-party software programs. Any such software is provided for your use as a convenience and your use is subject to the terms and conditions of any license agreement contained in that software. -2. ADDITIONAL LICENSE RIGHTS -- REDISTRIBUTABLE CODE. In addition to the rights granted in Section 1, certain portions of the Software, as described in this Section 2, are provided to you with additional license rights. These additional license rights are conditioned -Everett VSPro 1 -Final 11.04.02 -upon your compliance with the distribution requirements and license limitations described in -Section 3. -2.1 Sample Code. Microsoft grants you a limited, nonexclusive, royalty-free license -to: (a) use and modify the source code version of those portions of the Software identified as -"Samples" in REDIST.TXT or elsewhere in the Software ("Sample Code") for the sole purposes -of designing, developing, and testing your software product(s), and (b) reproduce and -distribute the Sample Code, along with any modifications thereof, in object and/or source code -form. For applicable redistribution requirements for Sample Code, see Section 3.1 below. -2.2 Redistributable Code—General. Microsoft grants you a limited, nonexclusive, -royalty-free license to reproduce and distribute the object code form of any portion of the -Software listed in REDIST.TXT ("Redistributable Code"). For general redistribution -requirements for Redistributable Code, see Section 3.1 below. -2.3 Redistributable Code—Microsoft Merge Modules ("MSM"). Microsoft grants -you a limited, nonexclusive, royalty-free license to reproduce and distribute the content of MSM -file(s) listed in REDIST.TXT in the manner described in the Software documentation only so -long as you redistribute such content in its entirety and do not modify such content in any way. -For all other applicable redistribution requirements for MSM files, see Section 3.1 below. -2.4 Redistributable Code—Microsoft Foundation Classes (MFC), Active Template -Libraries (ATL), and C runtimes (CRTs). In addition to the rights granted in Section 1, -Microsoft grants you a license to use and modify the source code version of those portions of -the Software that are identified as MFC, ATL, or CRTs (collectively, the "VC Redistributables"), -for the sole purposes of designing, developing, and testing your software product(s). Provided -you comply with Section 3.1 and you rename any files created by you that are included in the -Licensee Software (defined below), Microsoft grants you a limited, nonexclusive, royalty-free -license to reproduce and distribute the object code version of the VC Redistributables, including -any modifications you make. For purposes of this section, "modifications" shall mean -enhancements to the functionality of the VC Redistributables. For all other applicable -redistribution requirements for VC Redistributables, see Section 3.1 below. -3. DISTRIBUTION REQUIREMENTS AND OTHER LICENSE RIGHTS AND -LIMITATIONS. If you choose to exercise your rights under Section 2, any redistribution by -you is subject to your compliance with Section 3.1; some of the Redistributable Code has -additional limited use rights described in Section 3.2. -3.1 General Distribution Requirements. -(a) If you choose to redistribute Sample Code, or Redistributable Code -(collectively, the "Redistributables") as described in Section 2, you agree: (i) except as otherwise -noted in Section 2.1 (Sample Code), to distribute the Redistributables only in object code form -and in conjunction with and as a part of a software application product developed by you that -adds significant and primary functionality to the Redistributables ("Licensee Software"); -(ii) that the Redistributables only operate in conjunction with Microsoft Windows platforms; -(iii) that if the Licensee Software is distributed beyond Licensee's premises or externally from -Licensee's organization, to distribute the Licensee Software containing the Redistributables -pursuant to an end user license agreement (which may be "break-the-seal", "click-wrap" or -signed), with terms no less protective than those contained in this EULA; (iv) not to use -Microsoft's name, logo, or trademarks to market the Licensee Software; (v) to display your own -valid copyright notice which shall be sufficient to protect Microsoft's copyright in the Software; -Everett VSPro 2 -Final 11.04.02 -(vi) not to remove or obscure any copyright, trademark or patent notices that appear on the -Software as delivered to you; (vii) to indemnify, hold harmless, and defend Microsoft from and -against any claims or lawsuits, including attorney's fees, that arise or result from the use or -distribution of the Licensee Software; (viii) to otherwise comply with the terms of this EULA; -and (ix) agree that Microsoft reserves all rights not expressly granted. -You also agree not to permit further distribution of the Redistributables by your -end users except you may permit further redistribution of the Redistributables by your -distributors to your end-user customers if your distributors only distribute the Redistributables -in conjunction with, and as part of, the Licensee Software, you comply with all other terms of -this EULA, and your distributors comply with all restrictions of this EULA that are applicable -to you. - -(b) If you use the Redistributables, then in addition to your compliance with -the applicable distribution requirements described for the Redistributables, the following also -applies. Your license rights to the Redistributables are conditioned upon your not (i) creating -derivative works of the Redistributables in any manner that would cause the Redistributables in -whole or in part to become subject to any of the terms of an Excluded License; or (ii) -distributing the Redistributables (or derivative works thereof) in any manner that would cause -the Redistributables to become subject to any of the terms of an Excluded License. An -"Excluded License" is any license that requires as a condition of use, modification and/or -distribution of software subject to the Excluded License, that such software or other software -combined and/or distributed with such software be (x) disclosed or distributed in source code -form; (y) licensed for the purpose of making derivative works; or (z) redistributable at no -charge. -3.2 Additional Distribution Requirements for Certain Redistributable Code. -If you choose to redistribute the files discussed in this Section, then in addition to the terms of -Section 3.1, you must ALSO comply with the following. -(a) Microsoft SQL Server Desktop Engine ("MSDE"). If you redistribute -MSDE you agree to comply with the following additional requirements: (a) Licensee -Software shall not substantially duplicate the capabilities of Microsoft Access or, in the -reasonable opinion of Microsoft, compete with same; and (b) unless Licensee Software -requires your customers to license Microsoft Access in order to operate, you shall not -reproduce or use MSDE for commercial distribution in conjunction with a general -purpose word processing, spreadsheet or database management software product, or an -integrated work or product suite whose components include a general purpose word -processing, spreadsheet, or database management software product except for the -exclusive use of importing data to the various formats supported by Microsoft Access. -A product that includes limited word processing, spreadsheet or database components -along with other components which provide significant and primary value, such as an -accounting product with limited spreadsheet capability, is not considered to be a -"general purpose" product. -(b) Microsoft Data Access Components. If you redistribute the Microsoft -Data Access Component file identified as MDAC_TYP.EXE, you also agree to -redistribute such file in object code only in conjunction with and as a part of a Licensee -Software developed by you with a Microsoft development tool product that adds -significant and primary functionality to MDAC_TYP.EXE. -Everett VSPro 3 -Final 11.04.02 -3.3 Separation of Components. The Software is licensed as a single product. Its -component parts may not be separated for use by more than one user. -3.4 Benchmark Testing. The Software may contain the Microsoft .NET Framework. -You may not disclose the results of any benchmark test of the .NET Framework component of -the Software to any third party without Microsoft's prior written approval. -4. PRERELEASE CODE. Portions of the Software may be identified as prerelease code -("Prerelease Code"). Such Prerelease Code is not at the level of performance and compatibility -of the final, generally available product offering. The Prerelease Code may not operate correctly -and may be substantially modified prior to first commercial shipment. Microsoft is not -obligated to make this or any later version of the Prerelease Code commercially available. The -grant of license to use Prerelease Code expires upon availability of a commercial release of the -Prerelease Code from Microsoft. NOTE: In the event that Prerelease Code contains a separate -end-user license agreement, the terms and conditions of such end-user license agreement shall -govern your use of the corresponding Prerelease Code. -5. RESERVATION OF RIGHTS AND OWNERSHIP. Microsoft reserves all rights not -expressly granted to you in this EULA. The Software is protected by copyright and other -intellectual property laws and treaties. Microsoft or its suppliers own the title, copyright, and -other intellectual property rights in the Software. The Software is licensed, not sold. -6. LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION, AND -DISASSEMBLY. You may not reverse engineer, decompile, or disassemble the Software, -except and only to the extent that such activity is expressly permitted by applicable law -notwithstanding this limitation. -7. NO RENTAL/COMMERCIAL HOSTING. You may not rent, lease, lend or provide -commercial hosting services with the Software. -8. CONSENT TO USE OF DATA. You agree that Microsoft and its affiliates may collect -and use technical information gathered as part of the product support services provided to you, -if any, related to the Software. Microsoft may use this information solely to improve our -products or to provide customized services or technologies to you and will not disclose this -information in a form that personally identifies you. -9. LINKS TO THIRD PARTY SITES. You may link to third party sites through the use of -the Software. The third party sites are not under the control of Microsoft, and Microsoft is not -responsible for the contents of any third party sites, any links contained in third party sites, or -any changes or updates to third party sites. Microsoft is not responsible for webcasting or any -other form of transmission received from any third party sites. Microsoft is providing these -links to third party sites to you only as a convenience, and the inclusion of any link does not -imply an endorsement by Microsoft of the third party site. -10. ADDITIONAL SOFTWARE/SERVICES. This EULA applies to updates, supplements, -add-on components, or Internet-based services components, of the Software that Microsoft may -provide to you or make available to you after the date you obtain your initial copy of the -Software, unless we provide other terms along with the update, supplement, add-on -component, or Internet-based services component. Microsoft reserves the right to discontinue -any Internet-based services provided to you or made available to you through the use of the -Software. -11. UPGRADES/DOWNGRADES -Everett VSPro 4 -Final 11.04.02 -11.1 Upgrades. To use a version of the Software identified as an upgrade, you must -first be licensed for the software identified by Microsoft as eligible for the upgrade. After -upgrading, you may no longer use the software that formed the basis for your upgrade -eligibility. -11.2 Downgrades. Instead of installing and using the Software, you may install and -use copies of an earlier version of the Software, provided that you completely remove such -earlier version and install the current version of the Software within a reasonable time. Your -use of such earlier version shall be governed by this EULA, and your rights to use such earlier -version shall terminate when you install the Software. -11.3 Special Terms for Version 2003 Upgrade Editions of the Software. If the -Software accompanying this EULA is the version 2003 edition of the Software and you have -acquired it as an upgrade from the corresponding "2002" edition of the Microsoft software -product with the same product name as the Software (the "Qualifying Software"), then -Section 11.1 does not apply to you. Instead, you may continue to use the Qualifying Software -AND the version 2003 upgrade for so long as you continue to comply with the terms of this -EULA and the EULA governing your use of the Qualifying Software. Qualifying Software does -not include non-Microsoft software products. -12. NOT FOR RESALE SOFTWARE. Software identified as "Not For Resale" or "NFR," -may not be sold or otherwise transfered for value, or used for any purpose other than -demonstration, test or evaluation. -13. ACADEMIC EDITION SOFTWARE. To use Software identified as "Academic -Edition" or "AE," you must be a "Qualified Educational User." For qualification-related -questions, please contact the Microsoft Sales Information Center/One Microsoft -Way/Redmond, WA 98052-6399 or the Microsoft subsidiary serving your country. -14. EXPORT RESTRICTIONS. You acknowledge that the Software is subject to U.S. export -jurisdiction. You agree to comply with all applicable international and national laws that apply -to the Software, including the U.S. Export Administration Regulations, as well as end-user, end- -use, and destination restrictions issued by U.S. and other governments. For additional -information see <http://www.microsoft.com/exporting/>. -15. SOFTWARE TRANSFER. The initial user of the Software may make a one-time -permanent transfer of this EULA and Software to another end user, provided the initial user -retains no copies of the Software. This transfer must include all of the Software (including all -component parts, the media and printed materials, any upgrades (including any Qualifying -Software as defined in Section 11.3), this EULA, and, if applicable, the Certificate of -Authenticity). The transfer may not be an indirect transfer, such as a consignment. Prior to the -transfer, the end user receiving the Software must agree to all the EULA terms. -16. TERMINATION. Without prejudice to any other rights, Microsoft may terminate this -EULA if you fail to comply with the terms and conditions of this EULA. In such event, you -must destroy all copies of the Software and all of its component parts. -Everett VSPro 5 -Final 11.04.02 -17. LIMITED WARRANTY FOR SOFTWARE ACQUIRED IN THE US AND CANADA. -Except for the "Redistributables," which are provided AS IS without warranty of any kind, -Microsoft warrants that the Software will perform substantially in accordance with the -accompanying materials for a period of ninety (90) days from the date of receipt. - -If an implied warranty or condition is created by your state/jurisdiction and federal or -state/provincial law prohibits disclaimer of it, you also have an implied warranty or condition, -BUT ONLY AS TO DEFECTS DISCOVERED DURING THE PERIOD OF THIS LIMITED -WARRANTY (NINETY DAYS). AS TO ANY DEFECTS DISCOVERED AFTER THE -NINETY-DAY PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND. - -Some states/jurisdictions do not allow limitations on how long an implied warranty or - - -condition lasts, so the above limitation may not apply to you. -Any supplements or updates to the Software, including without limitation, any (if any) service -packs or hot fixes provided to you after the expiration of the ninety day Limited Warranty -period are not covered by any warranty or condition, express, implied or statutory. - - -LIMITATION ON REMEDIES; NO CONSEQUENTIAL OR OTHER DAMAGES. Your -exclusive remedy for any breach of this Limited Warranty is as set forth below. Except for any -refund elected by Microsoft, YOU ARE NOT ENTITLED TO ANY DAMAGES, -INCLUDING BUT NOT LIMITED TO CONSEQUENTIAL DAMAGES, if the Software does -not meet Microsoft's Limited Warranty, and, to the maximum extent allowed by applicable -law, even if any remedy fails of its essential purpose. The terms of Section 19 ("Exclusion of -Incidental, Consequential and Certain Other Damages") are also incorporated into this Limited -Warranty. Some states/jurisdictions do not allow the exclusion or limitation of incidental or -consequential damages, so the above limitation or exclusion may not apply to you. This -Limited Warranty gives you specific legal rights. You may have other rights which vary from -state/jurisdiction to state/jurisdiction. YOUR EXCLUSIVE REMEDY. Microsoft's and its -suppliers' entire liability and your exclusive remedy for any breach of this Limited Warranty or -for any other breach of this EULA or for any other liability relating to the Software shall be, at -Microsoft's option from time to time exercised subject to applicable law, (a) return of the -amount paid (if any) for the Software, or (b) repair or replacement of the Software, that does not -meet this Limited Warranty and that is returned to Microsoft with a copy of your receipt. You -will receive the remedy elected by Microsoft without charge, except that you are responsible for -any expenses you may incur (e.g. cost of shipping the Software to Microsoft). This Limited -Warranty is void if failure of the Software has resulted from accident, abuse, misapplication, - -abnormal use or a virus. Any replacement Software will be warranted for the remainder of the -original warranty period or thirty (30) days, whichever is longer, and Microsoft will use -commercially reasonable efforts to provide your remedy within a commercially reasonable time -of your compliance with Microsoft's warranty remedy procedures. Outside the United States or -Canada, neither these remedies nor any product support services offered by Microsoft are -available without proof of purchase from an authorized international source. To exercise your -remedy, contact: Microsoft, Attn. Microsoft Sales Information Center/One Microsoft -Way/Redmond, WA 98052-6399, or the Microsoft subsidiary serving your country. - - -18. DISCLAIMER OF WARRANTIES. The Limited Warranty that appears above is the -only express warranty made to you and is provided in lieu of any other express warranties or -similar obligations (if any) created by any advertising, documentation, packaging, or other -communications. EXCEPT FOR THE LIMITED WARRANTY AND TO THE MAXIMUM -Everett VSPro 6 -Final 11.04.02 -EXTENT PERMITTED BY APPLICABLE LAW, MICROSOFT AND ITS SUPPLIERS -PROVIDE THE SOFTWARE AND SUPPORT SERVICES (IF ANY) AS IS AND WITH ALL -FAULTS, AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, -WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, -ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR CONDITIONS OF -MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, OF RELIABILITY -OR AVAILABILITY, OF ACCURACY OR COMPLETENESS OF RESPONSES, OF -RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF LACK OF -NEGLIGENCE, ALL WITH REGARD TO THE SOFTWARE, AND THE PROVISION OF OR -FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES, INFORMATION, SOFTWARE, -AND RELATED CONTENT THROUGH THE SOFTWARE OR OTHERWISE ARISING -OUT OF THE USE OF THE SOFTWARE. ALSO, THERE IS NO WARRANTY OR -CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, -CORRESPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT WITH REGARD TO -THE SOFTWARE. - -19. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER -DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO -EVENT SHALL MICROSOFT OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, -INCIDENTAL, PUNITIVE, INDIRECT, OR CONSEQUENTIAL DAMAGES -WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF -PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS -INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE TO -MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR -NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) -ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE -THE SOFTWARE, THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT OR -OTHER SERVICES, INFORMATION, SOFTWARE, AND RELATED CONTENT -THROUGH THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF THE -SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION -OF THIS EULA, EVEN IN THE EVENT OF THE FAULT, TORT (INCLUDING -NEGLIGENCE), MISREPRESENTATION, STRICT LIABILITY, BREACH OF CONTRACT -OR BREACH OF WARRANTY OF MICROSOFT OR ANY SUPPLIER, AND EVEN IF -MICROSOFT OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH -DAMAGES. -20. LIMITATION OF LIABILITY AND REMEDIES. NOTWITHSTANDING ANY -DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER -(INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED HEREIN AND -ALL DIRECT OR GENERAL DAMAGES IN CONTRACT OR ANYTHING ELSE), THE -ENTIRE LIABILITY OF MICROSOFT AND ANY OF ITS SUPPLIERS UNDER ANY -PROVISION OF THIS EULA AND YOUR EXCLUSIVE REMEDY HEREUNDER (EXCEPT -FOR ANY REMEDY OF REPAIR OR REPLACEMENT ELECTED BY MICROSOFT WITH -RESPECT TO ANY BREACH OF THE LIMITED WARRANTY) SHALL BE LIMITED TO -THE GREATER OF THE ACTUAL DAMAGES YOU INCUR IN REASONABLE RELIANCE -ON THE SOFTWARE UP TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE -SOFTWARE OR US$5.00. THE FOREGOING LIMITATIONS, EXCLUSIONS AND -DISCLAIMERS (INCLUDING SECTIONS 17, 18, AND 19) SHALL APPLY TO THE -MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS -ITS ESSENTIAL PURPOSE. -Everett VSPro 7 -Final 11.04.02 -21. U.S. GOVERNMENT LICENSE RIGHTS. All Software provided to the U.S. -Government pursuant to solicitations issued on or after December 1, 1995 is provided with the -commercial license rights and restrictions described elsewhere herein. All Software provided to -the U.S. Government pursuant to solicitations issued prior to December 1, 1995 is provided with -"Restricted Rights" as provided for in FAR, 48 CFR 52.227-14 (JUNE 1987) or DFAR, 48 CFR -252.227-7013 (OCT 1988), as applicable. -22. APPLICABLE LAW. If you acquired this Software in the United States, this EULA is -governed by the laws of the State of Washington. If you acquired this Software in Canada, -unless expressly prohibited by local law, this EULA is governed by the laws in force in the -Province of Ontario, Canada; and, in respect of any dispute which may arise hereunder, you -consent to the jurisdiction of the federal and provincial courts sitting in Toronto, Ontario. If you -acquired this Software in the European Union, Iceland, Norway, or Switzerland, then local law -applies. If you acquired this Software in any other country, then local law may apply. -23. ENTIRE AGREEMENT; SEVERABILITY. This EULA (including any addendum or -amendment to this EULA which is included with the Software) are the entire agreement -between you and Microsoft relating to the Software and the support services (if any) and they -supersede all prior or contemporaneous oral or written communications, proposals and -representations with respect to the Software or any other subject matter covered by this EULA. -To the extent the terms of any Microsoft policies or programs for support services conflict with -the terms of this EULA, the terms of this EULA shall control. If any provision of this EULA is -held to be void, invalid, unenforceable or illegal, the other provisions shall continue in full force -and effect. -Si vous avez acquis votre produit Microsoft au CANADA, la garantie limitée suivante -s'applique : - -GARANTIE LIMITÉE - -Sauf pur celles du "Redistributables," qui sont fournies "comme telles," Microsoft garantit que -le Logiciel fonctionnera conformément aux documents inclus pendant une période de 90 jours -suivant la date de réception. - -Si une garantie ou condition implicite est créée par votre État ou votre territoire et qu'une loifédérale ou provinciale ou d'un État en interdit le déni, vous jouissez également d'une -garantie ou condition implicite, MAIS UNIQUEMENT POUR LES DÉFAUTS DÉCOUVERTS -DURANT LA PÉRIODE DE LA PRÉSENTE GARANTIE LIMITÉE (QUATRE-VINGT-DIX -JOURS). IL N'Y A AUCUNE GARANTIE OU CONDITION DE QUELQUE NATURE QUECE SOIT QUANT AUX DÉFAUTS DÉCOUVERTS APRÈS CETTE PÉRIODE DE QUATRE- -VINGT-DIX JOURS. Certains États ou territoires ne permettent pas de limiter la durée d'une -garantie ou condition implicite de sorte que la limitation ci-dessus peut ne pas s'appliquer à -vous. - -Tous les suppléments ou toutes les mises à jour relatifs au Logiciel, notamment, les ensembles -de services ou les réparations à chaud (le cas échéant) qui vous sont fournis après l'expiration -de la période de quatre-vingt-dix jours de la garantie limitée ne sont pas couverts par quelque -garantie ou condition que ce soit, expresse, implicite ou en vertu de la loi. - -LIMITATION DES RECOURS; ABSENCE DE DOMMAGES INDIRECTS OU AUTRES. - -Votre recours exclusif pour toute violation de la présente garantie limitée est décrit ci-après. - -Sauf pour tout remboursement au choix de Microsoft, si le Logiciel ne respecte pas la - -Everett VSPro 8 -Final 11.04.02 - -garantie limitée de Microsoft et, dans la mesure maximale permise par les lois applicables, -même si tout recours n'atteint pas son but essentiel, VOUS N'AVEZ DROIT À AUCUNS -DOMMAGES, NOTAMMENT DES DOMMAGES INDIRECTS. Les termes de la -clause «Exclusion des dommages accessoires, indirects et de certains autres dommages » sontégalement intégrées à la présente garantie limitée. Certains États ou territoires ne permettent -pas l'exclusion ou la limitation des dommages indirects ou accessoires de sorte que la limitation -ou l'exclusion ci-dessus peut ne pas s'appliquer à vous. La présente garantie limitée vous donne -des droits légaux spécifiques. Vous pouvez avoir d'autres droits qui peuvent varier d'unterritoire ou d'un État à un autre. VOTRE RECOURS EXCLUSIF. La seule responsabilité -obligation de Microsoft et de ses fournisseurs et votre recours exclusif pour toute violation de -la présente garantie limitée ou pour toute autre violation du présent contrat ou pour toute autre -responsabilité relative au Logiciel seront, selon le choix de Microsoft exercé de temps à autre -sous réserve de toute loi applicable, a) le remboursement du prix payé, le cas échéant, pour le -Logiciel ou b) la réparation ou le remplacement du Logiciel qui ne respecte pas la présente -garantie limitée et qui est retourné à Microsoft avec une copie de votre reçu. Vous recevrez la -compensation choisie par Microsoft, sans frais, sauf que vous êtes responsable des dépenses que -vous pourriez engager (p. ex., les frais d'envoi du Logiciel à Microsoft). La présente garantie -limitée est nulle si la défectuosité du Logiciel est causée par un accident, un usage abusif, une -mauvaise application, un usage anormal ou un virus. Tout Logiciel de remplacement sera -garanti pour le reste de la période initiale de la garantie ou pendant trente (30) jours, selon la -plus longue entre ces deux périodes. À l'extérieur des États-Unis ou du Canada, ces recours ou -l'un quelconque des services de soutien technique offerts par Microsoft ne sont pas disponibles -sans preuve d'achat d'une source internationale autorisée. Pour exercer votre recours, vous -devez communiquer avec Microsoft et vous adresser au Microsoft Sales Information -Center/One Microsoft Way/Redmond, WA 98052-6399, ou à la filiale de Microsoft de votre -pays. - -DÉNI DE GARANTIES. La garantie limitée qui apparaît ci-dessus constitue la seule garantie -expresse qui vous est donnée et remplace toutes autres garanties expresses (s'il en est) crées par -une publicité, un document, un emballage ou une autre communication. SAUF EN CE QUI A -TRAIT À LA GARANTIE LIMITÉE ET DANS LA MESURE MAXIMALE PERMISE PAR -LES LOIS APPLICABLES, LE LOGICIEL ET LES SERVICES DE SOUTIEN TECHNIQUE -(LE CAS ÉCHÉANT) SONT FOURNIS TELS QUELS ET AVEC TOUS LES DÉFAUTS PAR -MICROSOFT ET SES FOURNISSEURS, LESQUELS PAR LES PRÉSENTES DÉNIENT -TOUTES AUTRES GARANTIES ET CONDITIONS EXPRESSES, IMPLICITES OU EN -VERTU DE LA LOI, NOTAMMENT, MAIS SANS LIMITATION, (LE CAS ÉCHÉANT) LESGARANTIES, DEVOIRS OU CONDITIONS IMPLICITES DE QUALITÉ MARCHANDE, -D'ADAPTATION À UNE FIN PARTICULIÈRE, DE FIABILITÉ OU DE DISPONIBILITÉ, -D'EXACTITUDE OU D'EXHAUSTIVITÉ DES RÉPONSES, DES RÉSULTATS, DES -EFFORTS DÉPLOYÉS SELON LES RÈGLES DE L'ART, D'ABSENCE DE VIRUS ET -D'ABSENCE DE NÉGLIGENCE, LE TOUT À L'ÉGARD DU LOGICIEL ET DE LA -PRESTATION OU DE L'OMISSION DE LA PRESTATION DES SERVICES DE SOUTIEN -TECHNIQUE OU À L'ÉGARD DE LA FOURNITURE OU DE L'OMISSION DE LA -FOURNITURE DE TOUS AUTRES SERVICES, RENSEIGNEMENTS, LOGICIELS, ET -CONTENU QUI S'Y RAPPORTE GRÂCE AU LOGICIEL OU PROVENANT AUTREMENT -DE L'UTILISATION DU LOGICIEL . PAR AILLEURS, IL N'Y A AUCUNE GARANTIE OU -CONDITION QUANT AU TITRE DE PROPRIÉTÉ, À LA JOUISSANCE OU LA -POSSESSION PAISIBLE, À LA CONCORDANCE À UNE DESCRIPTION NI QUANT À -UNE ABSENCE DE CONTREFAÇON CONCERNANT LE LOGICIEL. - -EXCLUSION DES DOMMAGES ACCESSOIRES, INDIRECTS ET DE CERTAINS AUTRES -DOMMAGES. DANS LA MESURE MAXIMALE PERMISE PAR LES LOIS APPLICABLES, -EN AUCUN CAS MICROSOFT OU SES FOURNISSEURS NE SERONT RESPONSABLES -DES DOMMAGES SPÉCIAUX, CONSÉCUTIFS, ACCESSOIRES OU INDIRECTS DE - -Everett VSPro 9 -Final 11.04.02 - -QUELQUE NATURE QUE CE SOIT (NOTAMMENT, LES DOMMAGES À L'ÉGARD DUMANQUE À GAGNER OU DE LA DIVULGATION DE RENSEIGNEMENTS -CONFIDENTIELS OU AUTRES, DE LA PERTE D'EXPLOITATION, DE BLESSURES -CORPORELLES, DE LA VIOLATION DE LA VIE PRIVÉE, DE L'OMISSION DE REMPLIR -TOUT DEVOIR, Y COMPRIS D'AGIR DE BONNE FOI OU D'EXERCER UN SOIN -RAISONNABLE, DE LA NÉGLIGENCE ET DE TOUTE AUTRE PERTE PÉCUNIAIRE OU -AUTRE PERTE DE QUELQUE NATURE QUE CE SOIT) SE RAPPORTANT DE QUELQUEMANIÈRE QUE CE SOIT À L'UTILISATION DU LOGICIEL OU À L'INCAPACITÉ DE -S'EN SERVIR, À LA PRESTATION OU À L'OMISSION DE LA PRESTATION DE -SERVICES DE SOUTIEN TECHNIQUE OU À LA FOURNITURE OU À L'OMISSION DE -LA FOURNITURE DE TOUS AUTRES SERVICES, RENSEIGNEMENTS, LOGICIELS, ET -CONTENU QUI S'Y RAPPORTE GRÂCE AU LOGICIEL OU PROVENANT AUTREMENT -DE L'UTILISATION DU LOGICIEL OU AUTREMENT AUX TERMES DE TOUTE -DISPOSITION DE LA PRÉSENTE CONVENTION OU RELATIVEMENT À UNE TELLE -DISPOSITION, MÊME EN CAS DE FAUTE, DE DÉLIT CIVIL (Y COMPRIS LANÉGLIGENCE), DE RESPONSABILITÉ STRICTE, DE VIOLATION DE CONTRAT OU DEVIOLATION DE GARANTIE DE MICROSOFT OU DE TOUT FOURNISSEUR ET MÊME -SI MICROSOFT OU TOUT FOURNISSEUR A ÉTÉ AVISÉ DE LA POSSIBILITÉ DE TELS -DOMMAGES. - -LIMITATION DE RESPONSABILITÉ ET RECOURS. MALGRÉ LES DOMMAGES QUE -VOUS PUISSIEZ SUBIR POUR QUELQUE MOTIF QUE CE SOIT (NOTAMMENT, MAISSANS LIMITATION, TOUS LES DOMMAGES SUSMENTIONNÉS ET TOUS LES -DOMMAGES DIRECTS OU GÉNÉRAUX OU AUTRES), LA SEULE RESPONSABILITÉ DE -MICROSOFT ET DE L'UN OU L'AUTRE DE SES FOURNISSEURS AUX TERMES DE -TOUTE DISPOSITION DE LA PRÉSENTE CONVENTION ET VOTRE RECOURS -EXCLUSIF À L'ÉGARD DE TOUT CE QUI PRÉCÈDE (SAUF EN CE QUI CONCERNETOUT RECOURS DE RÉPARATION OU DE REMPLACEMENT CHOISI PAR -MICROSOFT À L'ÉGARD DE TOUT MANQUEMENT À LA GARANTIE LIMITÉE) SELIMITE AU PLUS ÉLEVÉ ENTRE LES MONTANTS SUIVANTS : LE MONTANT QUE -VOUS AVEZ RÉELLEMENT PAYÉ POUR LE LOGICIEL OU 5,00 $US. LES LIMITES, -EXCLUSIONS ET DÉNIS QUI PRÉCÈDENT (Y COMPRIS LES CLAUSES CI-DESSUS), -S'APPLIQUENT DANS LA MESURE MAXIMALE PERMISE PAR LES LOIS -APPLICABLES, MÊME SI TOUT RECOURS N'ATTEINT PAS SON BUT ESSENTIEL. - -À moins que cela ne soit prohibé par le droit local applicable, la présente Convention est régie -par les lois de la province d'Ontario, Canada. Vous consentez à la compétence des tribunaux -fédéraux et provinciaux siégeant à Toronto, dans la province d'Ontario. - -Au cas où vous auriez des questions concernant cette licence ou que vous désiriez vous mettre -en rapport avec Microsoft pour quelque raison que ce soit, veuillez utiliser l'information -contenue dans le Logiciel pour contacter la filiale de Microsoft desservant votre pays, ou visitez -Microsoft sur le World Wide Web à http://www.microsoft.com. - -The following MICROSOFT GUARANTEE applies to you if you acquired this Software in -any other country: - -Statutory rights not affected -The following guarantee is not restricted to any territory and does -not affect any statutory rights that you may have from your reseller or from Microsoft if you -acquired the Software directly from Microsoft. If you acquired the Software or any support -services in Australia, New Zealand or Malaysia, please see the "Consumer rights" section -below. - -Everett VSPro 10 -Final 11.04.02 - -The guarantee -The Software is designed and offered as a general-purpose software, not for any -user's particular purpose. You accept that no Software is error free and you are strongly -advised to back-up your files regularly. Provided that you have a valid license, Microsoft -guarantees that a) for a period of 90 days from the date of receipt of your license to use the -Software or the shortest period permitted by applicable law it will perform substantially in -accordance with the written materials that accompany the Software; and b) any support services -provided by Microsoft shall be substantially as described in applicable written materials -provided to you by Microsoft and Microsoft support engineers will use reasonable efforts, care -and skill to solve any problem issues. In the event that the Software fails to comply with this -guarantee, Microsoft will either (a) repair or replace the Software or (b) return the price you -paid. This guarantee is void if failure of the Software results from accident, abuse or -misapplication. Any replacement Software will be guaranteed for the remainder of the original -guarantee period or 30 days, whichever period is longer. You agree that the above guarantee is -your sole guarantee in relation to the Software and any support services. - -Exclusion of All Other Terms -To the maximum extent permitted by applicable law and subject to -the guarantee above, Microsoft disclaims all warranties, conditions and other terms, either -express or implied (whether by statute, common law, collaterally or otherwise) including but -not limited to implied warranties of satisfactory quality and fitness for particular purpose with -respect to the Software and the written materials that accompany the Software. Any implied -warranties that cannot be excluded are limited to 90 days or to the shortest period permitted by -applicable law, whichever is greater. - -Limitation of Liability -To the maximum extent permitted by applicable law and except as -provided in the Microsoft Guarantee, Microsoft and its suppliers shall not be liable for any -damages whatsoever (including without limitation, damages for loss of business profits, -business interruption, loss of business information or other pecuniary loss) arising out of the -use or inability to use the Software, even if Microsoft has been advised of the possibility of such -damages. In any case Microsoft's entire liability under any provision of this Agreement shall be -limited to the amount actually paid by you for the Software. These limitations do not apply to -any liabilities that cannot be excluded or limited by applicable laws. - -Consumer rights -Consumers in Australia, New Zealand or Malaysia may have the benefit of -certain rights and remedies by reason of the Trade Practices Act and similar state and territory -laws in Australia, the Consumer Guarantees Act in New Zealand and the Consumer Protection -Act in Malaysia in respect of which liability cannot lawfully be modified or excluded. If you -acquired the Software in New Zealand for the purposes of a business, you confirm that the -Consumer Guarantees Act does not apply. If you acquired the Software in Australia and if -Microsoft breaches a condition or warranty implied under any law which cannot lawfully be -modified or excluded by this agreement then, to the extent permitted by law, Microsoft's -liability is limited, at Microsoft's option, to: (i) in the case of the Software: a) repairing or -replacing the Software; or b) the cost of such repair or replacement; and (ii) in the case of -support services: a) re-supply of the services; or b) the cost of having the services supplied -again. - -Everett VSPro 11 -Final 11.04.02 - -Should you have any questions concerning this EULA, or if you desire to contact Microsoft for -any reason, please use the address information enclosed in this Software to contact the -Microsoft subsidiary serving your country or visit Microsoft on the World Wide Web at -http://www.microsoft.com. - -Everett VSPro 12 -Final 11.04.02 - -%% The following software may be included in this product: zlib; Use of any of this software is governed by the terms of the license below: +For the purposes of this copyright and license, "Info-ZIP" is defined asthe +following set of individuals: + + Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup + Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, + Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, + Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, + Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, + Dave Smith, Christian Spieler, Antoine Verheijen, Paul von Behren, Rich + Wales, Mike White + +This software is provided "as is," without warranty of any kind, express or +implied. In no event shall Info-ZIP or its contributors be held liable for any +direct, indirect, incidental, special or consequential damages arising out of +the use of or inability to use this software. + +Permission is granted to anyone to use this software for any purpose, including +commercial applications, and to alter it and redistribute it freely, subject to +the following restrictions: + +1. Redistributions of source code must retain the above copyright notice, +definition, disclaimer, and this list of conditions. + +2. Redistributions in binary form (compiled executables) must reproduce the +above copyright notice, definition, disclaimer, and this list of conditions in +documentation and/or other materials provided with the distribution. The sole +exception to this condition is redistribution of a standard UnZipSFX binary +(including SFXWiz) as part of a self-extracting archive; that is permitted +without inclusion of this license, as long as the normal SFX banner has not been +removed from the binary or disabled. + +3. Altered versions--including, but not limited to, ports to new operating +systems, existing ports with new graphical interfaces, and dynamic, shared, or +static library versions--must be plainly marked as such and must not be +misrepresented as being the original source. Such altered versions also must +not be misrepresented as being Info-ZIP releases--including, but not limited to, +labeling of the altered versions with the names "Info-ZIP" (or any variation +thereof, including, but not limited to, different capitalizations), "Pocket +UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such +altered versions are further prohibited from misrepresentative use of the +Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s). + +4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," +"UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source +and binary releases. + + +%% The following software may be included in this product: XML Security; Use of + any of this software is governed by the terms of the license below: The + Apache Software License, Version 1.1 PDF + +Copyright (C) 2002 The Apache Software Foundation. + +All rights reserved. Redistribution and use in source and binary forms, with or +without modifica- tion, are permitted provided that the following conditions are +met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if any,must +include the following acknowledgment:"This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names"Apache Forrest" and "Apache Software Foundation" must not be used +to endorse or promote products derived from this software without prior written +permission. For written permission,please contact apache@apache.org. 5. +Products derived from this software may not be called "Apache", normay "Apache" +appear in their name, without prior written permission of the Apache Software +Foundation. THIS SOFTWARE IS PROVIDED``AS IS'' AND ANY EXPRESSED OR IMPLIED +WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY +DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS +OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANYTHEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING +NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This software consists of +voluntary contributions made by many individuals on behalf of the Apache +Software Foundation. For more information on the Apache Software Foundation, +please see http://www.apache.org. + + +%% The following software may be included in this product: Regexp, Regular +Expression Package v. 1.2; Use of any of this software is governed by the terms +of the license below: The Apache Software License, Version 1.1 Copyright (c) +2001 The Apache Software Foundation. All rights reserved. Redistribution and +use in source and binary forms, with or without modification,are permitted +provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" +must not be used to endorse or promote products derived from this software +without prior written permission. For written permission, please contact +apache@apache.org. + +5. Products derived from this software may not be called "Apache", "Apache +Turbine", nor may "Apache" appear in their name, without prior written +permission of the Apache Software Foundation. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. + +======================================================================== + + +%% The following software may be included in this product: zlib; Use of any of +this software is governed by the terms of the license below: zlib.h -- interface of the 'zlib' general purpose compression library version 1.1.3, July 9th, 1998 @@ -1787,7 +2438,8 @@ zlib.h -- interface of the 'zlib' general purpose compression library (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format -%% The following software may be included in this product: Mozilla Rhino. Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: Mozilla Rhino. Use +of any of this software is governed by the terms of the license below: * The contents of this file are subject to the Netscape Public * License Version 1.1 (the "License"); you may not use this file @@ -1825,7 +2477,8 @@ zlib.h -- interface of the 'zlib' general purpose compression library * Andrew Wason */ -%% The following software may be included in this product: Apache Derby. Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: Apache Derby. Use +of any of this software is governed by the terms of the license below: Apache License @@ -2032,7 +2685,8 @@ zlib.h -- interface of the 'zlib' general purpose compression library limitations under the License. -%% The following software may be included in this product: 7-Zip. Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: 7-Zip. Use of any +of this software is governed by the terms of the license below: ~~~~~ License for use and distribution @@ -2076,146 +2730,421 @@ Version 2.1, February 1999 Preamble -The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. - -This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. - -When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. - -To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. - -For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. - -We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. - -To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. - -Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. - -Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. - -When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. - -We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. - -For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. - -In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. - -Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. - -The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. -TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - -0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". - -A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. - -The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) - -"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. - -Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. - -1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. - -You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. - -2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: - - a) The modified work must itself be a software library. - - b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. - - c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. - - d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. - - (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) - - These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. - - Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. - - In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. - -3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. - -Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. - -This option is useful when you wish to copy part of the code of the Library into a program that is not a library. - -4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. - -If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. - -5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. - -However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. - -When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. - -If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) - -Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. - -6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. - -You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: - - a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) - - b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. - - c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. - - d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. - - e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. - -For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. - -It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. - -7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: - - a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. - - b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. - -8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. - -9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. - -10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. - -11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. - -If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. - -It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. - -This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. - -12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. - -13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. - -Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. - -14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. +The licenses for most software are designed to take away your freedom to share +and change it. By contrast, the GNU General Public Licenses are intended to +guarantee your freedom to share and change free software--to make sure the +software is free for all its users. + +This license, the Lesser General Public License, applies to some specially +designated software packages--typically libraries--of the Free Software +Foundation and other authors who decide to use it. You can use it too, but we +suggest you first think carefully about whether this license or the ordinary +General Public License is the better strategy to use in any particular case, +based on the explanations below. + +When we speak of free software, we are referring to freedom of use, not price. +Our General Public Licenses are designed to make sure that you have the freedom +to distribute copies of free software (and charge for this service if you wish); +that you receive source code or can get it if you want it; that you can change +the software and use pieces of it in new free programs; and that you are +informed that you can do these things. + +To protect your rights, we need to make restrictions that forbid distributors to +deny you these rights or to ask you to surrender these rights. These +restrictions translate to certain responsibilities for you if you distribute +copies of the library or if you modify it. + +For example, if you distribute copies of the library, whether gratis or for a +fee, you must give the recipients all the rights that we gave you. You must +make sure that they, too, receive or can get the source code. If you link other +code with the library, you must provide complete object files to the recipients, +so that they can relink them with the library after making changes to the +library and recompiling it. And you must show them these terms so they know +their rights. + +We protect your rights with a two-step method: (1) we copyright the library, +and (2) we offer you this license, which gives you legal permission to copy, +distribute and/or modify the library. + +To protect each distributor, we want to make it very clear that there is no +warranty for the free library. Also, if the library is modified by someone else +and passed on, the recipients should know that what they have is not the +original version, so that the original author's reputation will not be affected +by problems that might be introduced by others. + +Finally, software patents pose a constant threat to the existence of any free +program. We wish to make sure that a company cannot effectively restrict the +users of a free program by obtaining a restrictive license from a patent holder. +Therefore, we insist that any patent license obtained for a version of the +library must be consistent with the full freedom of use specified in this +license. + +Most GNU software, including some libraries, is covered by the ordinary GNU +General Public License. This license, the GNU Lesser General Public License, +applies to certain designated libraries, and is quite different from the +ordinary General Public License. We use this license for certain libraries in +order to permit linking those libraries into non-free programs. + +When a program is linked with a library, whether statically or using a shared +library, the combination of the two is legally speaking a combined work, a +derivative of the original library. The ordinary General Public License +therefore permits such linking only if the entire combination fits its criteria +of freedom. The Lesser General Public License permits more lax criteria for +linking other code with the library. + +We call this license the "Lesser" General Public License because it does Less to +protect the user's freedom than the ordinary General Public License. It also +provides other free software developers Less of an advantage over competing +non-free programs. These disadvantages are the reason we use the ordinary +General Public License for many libraries. However, the Lesser license provides +advantages in certain special circumstances. + +For example, on rare occasions, there may be a special need to encourage the +widest possible use of a certain library, so that it becomes a de-facto +standard. To achieve this, non-free programs must be allowed to use the +library. A more frequent case is that a free library does the same job as +widely used non-free libraries. In this case, there is little to gain by +limiting the free library to free software only, so we use the Lesser General +Public License. + +In other cases, permission to use a particular library in non-free programs +enables a greater number of people to use a large body of free software. For +example, permission to use the GNU C Library in non-free programs enables many +more people to use the whole GNU operating system, as well as its variant, the +GNU/Linux operating system. + +Although the Lesser General Public License is Less protective of the users' +freedom, it does ensure that the user of a program that is linked with the +Library has the freedom and the wherewithal to run that program using a modified +version of the Library. + +The precise terms and conditions for copying, distribution and modification +follow. Pay close attention to the difference between a "work based on the +library" and a "work that uses the library". The former contains code derived +from the library, whereas the latter must be combined with the library in order +to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + +0. This License Agreement applies to any software library or other program +which contains a notice placed by the copyright holder or other authorized party +saying it may be distributed under the terms of this Lesser General Public +License (also called "this License"). Each licensee is addressed as "you". + +A "library" means a collection of software functions and/or data prepared so as +to be conveniently linked with application programs (which use some of those +functions and data) to form executables. + +The "Library", below, refers to any such software library or work which has been +distributed under these terms. A "work based on the Library" means either the +Library or any derivative work under copyright law: that is to say, a work +containing the Library or a portion of it, either verbatim or with modifications +and/or translated straightforwardly into another language. (Hereinafter, +translation is included without limitation in the term "modification".) + +"Source code" for a work means the preferred form of the work for making +modifications to it. For a library, complete source code means all the source +code for all modules it contains, plus any associated interface definition +files, plus the scripts used to control compilation and installation of the +library. + +Activities other than copying, distribution and modification are not covered by +this License; they are outside its scope. The act of running a program using +the Library is not restricted, and output from such a program is covered only if +its contents constitute a work based on the Library (independent of the use of +the Library in a tool for writing it). Whether that is true depends on what the +Library does and what the program that uses the Library does. + +1. You may copy and distribute verbatim copies of the Library's complete source +code as you receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice and +disclaimer of warranty; keep intact all the notices that refer to this License +and to the absence of any warranty; and distribute a copy of this License along +with the Library. + +You may charge a fee for the physical act of transferring a copy, and you may at +your option offer warranty protection in exchange for a fee. + +2. You may modify your copy or copies of the Library or any portion of it, thus +forming a work based on the Library, and copy and distribute such modifications +or work under the terms of Section 1 above, provided that you also meet all of +these conditions: + +a) The modified work must itself be a software library. + +b) You must cause the files modified to carry prominent notices stating that you +changed the files and the date of any change. + +c) You must cause the whole of the work to be licensed at no charge to all third +parties under the terms of this License. + +d) If a facility in the modified Library refers to a function or a table of data +to be supplied by an application program that uses the facility, other than as +an argument passed when the facility is invoked, then you must make a good faith +effort to ensure that, in the event an application does not supply such function +or table, the facility still operates, and performs whatever part of its purpose +remains meaningful. + +(For example, a function in a library to compute square roots has a purpose that +is entirely well-defined independent of the application. Therefore, Subsection +2d requires that any application-supplied function or table used by this +function must be optional: if the application does not supply it, the square +root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If identifiable +sections of that work are not derived from the Library, and can be reasonably +considered independent and separate works in themselves, then this License, and +its terms, do not apply to those sections when you distribute them as separate +works. But when you distribute the same sections as part of a whole which is a +work based on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the entire whole, +and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest your +rights to work written entirely by you; rather, the intent is to exercise the +right to control the distribution of derivative or collective works based on the +Library. + +In addition, mere aggregation of another work not based on the Library with the +Library (or with a work based on the Library) on a volume of a storage or +distribution medium does not bring the other work under the scope of this +License. + +3. You may opt to apply the terms of the ordinary GNU General Public License +instead of this License to a given copy of the Library. To do this, you must +alter all the notices that refer to this License, so that they refer to the +ordinary GNU General Public License, version 2, instead of to this License. (If +a newer version than version 2 of the ordinary GNU General Public License has +appeared, then you can specify that version instead if you wish.) Do not make +any other change in these notices. + +Once this change is made in a given copy, it is irreversible for that copy, so +the ordinary GNU General Public License applies to all subsequent copies and +derivative works made from that copy. + +This option is useful when you wish to copy part of the code of the Library into +a program that is not a library. + +4. You may copy and distribute the Library (or a portion or derivative of it, +under Section 2) in object code or executable form under the terms of Sections 1 +and 2 above provided that you accompany it with the complete corresponding +machine-readable source code, which must be distributed under the terms of +Sections 1 and 2 above on a medium customarily used for software interchange. + +If distribution of object code is made by offering access to copy from a +designated place, then offering equivalent access to copy the source code from +the same place satisfies the requirement to distribute the source code, even +though third parties are not compelled to copy the source along with the object +code. + +5. A program that contains no derivative of any portion of the Library, but is +designed to work with the Library by being compiled or linked with it, is called +a "work that uses the Library". Such a work, in isolation, is not a derivative +work of the Library, and therefore falls outside the scope of this License. + +However, linking a "work that uses the Library" with the Library creates an +executable that is a derivative of the Library (because it contains portions of +the Library), rather than a "work that uses the library". The executable is +therefore covered by this License. Section 6 states terms for distribution of +such executables. + +When a "work that uses the Library" uses material from a header file that is +part of the Library, the object code for the work may be a derivative work of +the Library even though the source code is not. Whether this is true is +especially significant if the work can be linked without the Library, or if the +work is itself a library. The threshold for this to be true is not precisely +defined by law. + +If such an object file uses only numerical parameters, data structure layouts +and accessors, and small macros and small inline functions (ten lines or less in +length), then the use of the object file is unrestricted, regardless of whether +it is legally a derivative work. (Executables containing this object code plus +portions of the Library will still fall under Section 6.) + +Otherwise, if the work is a derivative of the Library, you may distribute the +object code for the work under the terms of Section 6. Any executables +containing that work also fall under Section 6, whether or not they are linked +directly with the Library itself. + +6. As an exception to the Sections above, you may also combine or link a "work +that uses the Library" with the Library to produce a work containing portions of +the Library, and distribute that work under terms of your choice, provided that +the terms permit modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + +You must give prominent notice with each copy of the work that the Library is +used in it and that the Library and its use are covered by this License. You +must supply a copy of this License. If the work during execution displays +copyright notices, you must include the copyright notice for the Library among +them, as well as a reference directing the user to the copy of this License. +Also, you must do one of these things: + +a) Accompany the work with the complete corresponding machine-readable source +code for the Library including whatever changes were used in the work (which +must be distributed under Sections 1 and 2 above); and, if the work is an +executable linked with the Library, with the complete machine-readable "work +that uses the Library", as object code and/or source code, so that the user can +modify the Library and then relink to produce a modified executable containing +the modified Library. (It is understood that the user who changes the contents +of definitions files in the Library will not necessarily be able to recompile +the application to use the modified definitions.) + +b) Use a suitable shared library mechanism for linking with the Library. A +suitable mechanism is one that (1) uses at run time a copy of the library +already present on the user's computer system, rather than copying library +functions into the executable, and (2) will operate properly with a modified +version of the library, if the user installs one, as long as the modified +version is interface-compatible with the version that the work was made with. + +c) Accompany the work with a written offer, valid for at least three years, to +give the same user the materials specified in Subsection 6a, above, for a charge +no more than the cost of performing this distribution. + +d) If distribution of the work is made by offering access to copy from a +designated place, offer equivalent access to copy the above specified materials +from the same place. + +e) Verify that the user has already received a copy of these materials or that +you have already sent this user a copy. + +For an executable, the required form of the "work that uses the Library" must +include any data and utility programs needed for reproducing the executable from +it. However, as a special exception, the materials to be distributed need not +include anything that is normally distributed (in either source or binary form) +with the major components (compiler, kernel, and so on) of the operating system +on which the executable runs, unless that component itself accompanies the +executable. + +It may happen that this requirement contradicts the license restrictions of +other proprietary libraries that do not normally accompany the operating system. +Such a contradiction means you cannot use both them and the Library together in +an executable that you distribute. + +7. You may place library facilities that are a work based on the Library +side-by-side in a single library together with other library facilities not +covered by this License, and distribute such a combined library, provided that +the separate distribution of the work based on the Library and of the other +library facilities is otherwise permitted, and provided that you do these two +things: + +a) Accompany the combined library with a copy of the same work based on the +Library, uncombined with any other library facilities. This must be distributed +under the terms of the Sections above. + +b) Give prominent notice with the combined library of the fact that part of it +is a work based on the Library, and explaining where to find the accompanying +uncombined form of the same work. + +8. You may not copy, modify, sublicense, link with, or distribute the Library +except as expressly provided under this License. Any attempt otherwise to copy, +modify, sublicense, link with, or distribute the Library is void, and will +automatically terminate your rights under this License. However, parties who +have received copies, or rights, from you under this License will not have their +licenses terminated so long as such parties remain in full compliance. + +9. You are not required to accept this License, since you have not signed it. +However, nothing else grants you permission to modify or distribute the Library +or its derivative works. These actions are prohibited by law if you do not +accept this License. Therefore, by modifying or distributing the Library (or +any work based on the Library), you indicate your acceptance of this License to +do so, and all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + +10. Each time you redistribute the Library (or any work based on the Library), +the recipient automatically receives a license from the original licensor to +copy, distribute, link with or modify the Library subject to these terms and +conditions. You may not impose any further restrictions on the recipients' +exercise of the rights granted herein. You are not responsible for enforcing +compliance by third parties with this License. + +11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), conditions +are imposed on you (whether by court order, agreement or otherwise) that +contradict the conditions of this License, they do not excuse you from the +conditions of this License. If you cannot distribute so as to satisfy +simultaneously your obligations under this License and any other pertinent +obligations, then as a consequence you may not distribute the Library at all. +For example, if a patent license would not permit royalty-free redistribution of +the Library by all those who receive copies directly or indirectly through you, +then the only way you could satisfy both it and this License would be to refrain +entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, and +the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any patents or +other property right claims or to contest validity of any such claims; this +section has the sole purpose of protecting the integrity of the free software +distribution system which is implemented by public license practices. Many +people have made generous contributions to the wide range of software +distributed through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing to +distribute software through any other system and a licensee cannot impose that +choice. + +This section is intended to make thoroughly clear what is believed to be a +consequence of the rest of this License. + +12. If the distribution and/or use of the Library is restricted in certain +countries either by patents or by copyrighted interfaces, the original copyright +holder who places the Library under this License may add an explicit +geographical distribution limitation excluding those countries, so that +distribution is permitted only in or among countries not thus excluded. In such +case, this License incorporates the limitation as if written in the body of this +License. + +13. The Free Software Foundation may publish revised and/or new versions of the +Lesser General Public License from time to time. Such new versions will be +similar in spirit to the present version, but may differ in detail to address +new problems or concerns. + +Each version is given a distinguishing version number. If the Library specifies +a version number of this License which applies to it and "any later version", +you have the option of following the terms and conditions either of that version +or of any later version published by the Free Software Foundation. If the +Library does not specify a license version number, you may choose any version +ever published by the Free Software Foundation. + +14. If you wish to incorporate parts of the Library into other free programs +whose distribution conditions are incompatible with these, write to the author +to ask for permission. For software which is copyrighted by the Free Software +Foundation, write to the Free Software Foundation; we sometimes make exceptions +for this. Our decision will be guided by the two goals of preserving the free +status of all derivatives of our free software and of promoting the sharing and +reuse of software generally. NO WARRANTY -15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. +15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR +THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE +STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY +"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, +BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + +16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL +ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE +LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, +SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY +TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF +THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER +PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND +CONDITIONS -16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries -If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). +If you develop a new library, and you want it to be of the greatest possible use +to the public, we recommend making it free software that everyone can +redistribute and change. You can do so by permitting redistribution under these +terms (or, alternatively, under the terms of the ordinary General Public +License). -To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. +To apply these terms, attach the following notices to the library. It is safest +to attach them to the start of each source file to most effectively convey the +exclusion of warranty; and each file should have at least the "copyright" line +and a pointer to where the full notice is found. <one line to give the library's name and an idea of what it does.> Copyright (C) <year> <name of author> @@ -2236,7 +3165,9 @@ To apply these terms, attach the following notices to the library. It is safest Also add information on how to contact you by electronic and paper mail. -You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: +You should also get your employer (if you work as a programmer) or your school, +if any, to sign a "copyright disclaimer" for the library, if necessary. Here is +a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written @@ -2441,30 +3372,49 @@ LZMA SDK is available under any of the following licenses: 3. Simplified license for unmodified code (read SPECIAL EXCEPTION) 4. Proprietary license -This means that you can select one of these four options and follow rules of that license. +This means that you can select one of these four options and follow rules of +that license. -SPECIAL EXCEPTION: Igor Pavlov, as the author of this code, expressly permit you statically or dynamically to link your code (or bind by name) to the files from LZMA SDK without subjecting your linked code to the terms of the CPL or GNU LGPL. Any modification or addition to any file in the LZMA SDK, however, is subject to the GNU LGPL or CPL terms. +SPECIAL EXCEPTION: Igor Pavlov, as the author of this code, expressly permit +you statically or dynamically to link your code (or bind by name) to the files +from LZMA SDK without subjecting your linked code to the terms of the CPL or GNU +LGPL. Any modification or addition to any file in the LZMA SDK, however, is +subject to the GNU LGPL or CPL terms. -This SPECIAL EXCEPTION allows you to use LZMA SDK in applications with proprietary code, provided you keep the LZMA SDK code unmodified. +This SPECIAL EXCEPTION allows you to use LZMA SDK in applications with +proprietary code, provided you keep the LZMA SDK code unmodified. -SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly permits you to use LZMA SDK 4.43 under the same terms and conditions contained in the License Agreement you have for any previous version of LZMA SDK developed by Igor Pavlov. +SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly +permits you to use LZMA SDK 4.43 under the same terms and conditions contained +in the License Agreement you have for any previous version of LZMA SDK developed +by Igor Pavlov. -SPECIAL EXCEPTION #2 allows holders of proprietary licenses to use latest version of LZMA SDK as update for previous versions. +SPECIAL EXCEPTION #2 allows holders of proprietary licenses to use latest +version of LZMA SDK as update for previous versions. -GNU LGPL and CPL are pretty similar and both these licenses are classified as free software licenses at http://www.gnu.org/ and OSI-approved at http://www.opensource.org/. +GNU LGPL and CPL are pretty similar and both these licenses are classified as +free software licenses at http://www.gnu.org/ and OSI-approved at +http://www.opensource.org/. LZMA SDK also is available under a proprietary license which can include: - 1. The right to modify code from the LZMA SDK without subjecting the modified code to the terms of the CPL or GNU LGPL - 2. Technical support for LZMA SDK via email +1. The right to modify code from the LZMA SDK without subjecting the modified +code to the terms of the CPL or GNU LGPL + +2. Technical support for LZMA SDK via email -To request such a proprietary license, or for any additional consultations, send an email message, using the 7-Zip support page: Send message to LZMA developer +To request such a proprietary license, or for any additional consultations, send +an email message, using the 7-Zip support page: Send message to LZMA developer -The source code of 7-Zip is released under the terms of the GNU LGPL. You can download the source code of 7-Zip at 7-Zip's Source Forge Page +The source code of 7-Zip is released under the terms of the GNU LGPL. You can +download the source code of 7-Zip at 7-Zip's Source Forge Page Additional License(s) -The license included with the software differs slightly from the version posted on the website. Specifically it includes SPECIAL EXCEPTION #3, which is not present in the license on the website. The license from the software archive follows: +The license included with the software differs slightly from the version posted +on the website. Specifically it includes SPECIAL EXCEPTION #3, which is not +present in the license on the website. The license from the software archive +follows: LICENSE ------- @@ -2479,27 +3429,37 @@ LZMA SDK is available under any of the following licenses: It means that you can select one of these four options and follow rules of that license. -1,2) GNU LGPL and CPL licenses are pretty similar and both these licenses are classified as +1,2) GNU LGPL and CPL licenses are pretty similar and both these licenses are +classified as - "Free software licenses" at http://www.gnu.org/ - "OSI-approved" at http://www.opensource.org/ 3) SPECIAL EXCEPTION -Igor Pavlov, as the author of this code, expressly permits you to statically or dynamically link your code (or bind by name) to the files from LZMA SDK without subjecting your linked code to the terms of the CPL or GNU LGPL. Any modifications or additions to files from LZMA SDK, however, -are subject to the GNU LGPL or CPL terms. +Igor Pavlov, as the author of this code, expressly permits you to statically or +dynamically link your code (or bind by name) to the files from LZMA SDK without +subjecting your linked code to the terms of the CPL or GNU LGPL. Any +modifications or additions to files from LZMA SDK, however, are subject to the +GNU LGPL or CPL terms. -SPECIAL EXCEPTION allows you to use LZMA SDK in applications with -closed code, +SPECIAL EXCEPTION allows you to use LZMA SDK in applications with closed code, while you keep LZMA SDK code unmodified. -SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly permits you to use this code under the same terms and conditions contained in the License Agreement you have for any previous version of LZMA SDK developed by Igor Pavlov. +SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly +permits you to use this code under the same terms and conditions contained in +the License Agreement you have for any previous version of LZMA SDK developed by +Igor Pavlov. -SPECIAL EXCEPTION #2 allows owners of proprietary licenses to use latest version of LZMA SDK as update for previous versions. +SPECIAL EXCEPTION #2 allows owners of proprietary licenses to use latest version +of LZMA SDK as update for previous versions. -SPECIAL EXCEPTION #3: Igor Pavlov, as the author of this code, expressly permits you to use code of the following files: BranchTypes.h, LzmaTypes.h, LzmaTest.c, LzmaStateTest.c, LzmaAlone.cpp, LzmaAlone.cs, LzmaAlone.java as public domain code. +SPECIAL EXCEPTION #3: Igor Pavlov, as the author of this code, expressly +permits you to use code of the following files: BranchTypes.h, LzmaTypes.h, +LzmaTest.c, LzmaStateTest.c, LzmaAlone.cpp, LzmaAlone.cs, LzmaAlone.java as +public domain code. 4) Proprietary license @@ -2510,502 +3470,13 @@ can include: 1) Right to modify code without subjecting modified code to the terms of the CPL or GNU LGPL 2) Technical support for code -To request such proprietary license or any additional consultations, send email message from that page:http://www.7-zip.org/support.html +To request such proprietary license or any additional consultations, send email +message from that page:http://www.7-zip.org/support.html -You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +You should have received a copy of the GNU Lesser General Public License along +with this library; if not, write to the Free Software Foundation, Inc., 59 +Temple Place, Suite 330, Boston, MA 02111-1307 USA -You should have received a copy of the Common Public License along with this library. - -*************************************************************************** - -%%The following software may be included in this product: -Active Template Library (ATL) - -Use of any of this software is governed by the terms of the license below: - -(note: search for "ATL") - -Visual Studio 2005 EULA - MICROSOFT SOFTWARE LICENSE TERMS -MICROSOFT VISUAL STUDIO 2005 PROFESSIONAL EDITION - -These license terms are an agreement between Microsoft Corporation (or based on -where you live, one of its affiliates) and you. Please read them. They apply -to the software named above, which includes the media on which you received it, -if any. The terms also apply to any Microsoft - • updates, - • supplements, - • Internet-based services, and - • support services -for this software, unless other terms accompany those items. If so, those terms -apply. - -BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT THEM, DO -NOT USE THE SOFTWARE. INSTEAD, RETURN IT TO THE RETAILER FOR A REFUND OR -CREDIT. If you cannot obtain a refund there, contact Microsoft or the Microsoft -affiliate serving your country for information about Microsoft’s refund -policies. See www.microsoft.com/worldwide. In the United States and Canada, -call (800) MICROSOFT or see www.microsoft.com/info/nareturns.htm. -AS DESCRIBED BELOW, USING SOME FEATURES ALSO OPERATES AS YOUR CONSENT TO THE -TRANSMISSION OF CERTAIN STANDARD COMPUTER INFORMATION FOR INTERNET-BASED SERVICES. - -NOTICE: APPLICATIONS AND SERVICES BUILT WITH MICROSOFT VISUAL J# 2005 WILL RUN -ONLY IN THE MICROSOFT .NET FRAMEWORK. VISUAL J# 2005 HAS BEEN INDEPENDENTLY -DEVELOPED BY MICROSOFT. IT IS NOT ENDORSED OR APPROVED BY SUN MICROSYSTEMS, INC. ------------------------------- -IF YOU COMPLY WITH THESE LICENSE TERMS, YOU HAVE THE RIGHTS BELOW FOR EACH -LICENSE YOU ACQUIRE. - -1. OVERVIEW. - -a. Software. The software includes development tools, software programs and -documentation. - -b. License Model. The software is licensed on a per user basis. - -2. INSTALLATION AND USE RIGHTS. - -a. General. One user may install and use copies of the software to design, -develop, test and demonstrate your programs. Testing does not include staging -on a server in a production environment, such as loading content prior to -production use. - -b. Included Microsoft Programs. These license terms apply to all Microsoft -programs included with the software. If the license terms with any of those -programs give you other rights that do not expressly conflict with these license -terms, you also have those rights. - -c. Third Party Programs. The software contains third party programs. The -license terms with those programs apply to your use of them. - -3. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS. - -a. User Testing. Your end users may access the software to perform acceptance -tests on your programs. - -b. Distributable Code. The software contains code that you are permitted to -distribute in programs you develop if you comply with the terms below. - -i. Right to Use and Distribute. The code and text files listed below are -“Distributable Code.” - • REDIST.TXT Files. You may copy and distribute the object code form of code -listed in REDIST.TXT files. - • Sample Code. You may modify, copy, and distribute the source and object -code form of code marked as “sample.” - • Microsoft Merge Modules. You may copy and distribute the unmodified output -of Microsoft Merge Modules. - • MFCs, ATLs and CRTs. You may modify the source code form of Microsoft -Foundation Classes (MFCs), Active Template Libraries (ATLs), and C runtimes -(CRTs) to design, develop and test your programs, and copy and distribute the -object code form of your modified files under a new name. - • MDAC. You may copy and distribute the object code form of the MDAC_TYP.EXE -file. - • Image Library. You may copy and distribute images and animations in the -Image Library as described in the software documentation. You may also modify -that content. If you modify the content, it must be for use that is consistent -with the permitted use of the unmodified content. - • Third Party Distribution. You may permit distributors of your programs to -copy and distribute the Distributable Code as part of those programs. - -ii. Distribution Requirements. For any Distributable Code you distribute, you must - • add significant primary functionality to it in your programs; - • require distributors and external end users to agree to terms that protect -it at least as much as this agreement; - • display your valid copyright notice on your programs; and - • indemnify, defend, and hold harmless Microsoft from any claims, including -attorneys’ fees, related to the distribution or use of your programs. - -iii. Distribution Restrictions. You may not - • alter any copyright, trademark or patent notice in the Distributable Code; - • use Microsoft’s trademarks in your programs’ names or in a way that suggests -your programs come from or are endorsed by Microsoft; - • distribute Distributable Code, other than code listed in OTHER-DIST.TXT -files, to run on a platform other than the Windows platform; - • include Distributable Code in malicious, deceptive or unlawful programs; or - • modify or distribute the source code of any Distributable Code so that any -part of it becomes subject to an Excluded License. An Excluded License is one -that requires, as a condition of use, modification or distribution, that - • the code be disclosed or distributed in source code form; or - • others have the right to modify it. - -c. Additional Functionality. Microsoft may provide additional functionality for -the software. Other license terms and fees may apply. - -4. INTERNET-BASED SERVICES. Microsoft provides Internet-based services with the -software. It may change or cancel them at any time. - -a. Consent for Internet-Based Services. The software feature described below -connects to Microsoft or service provider computer systems over the Internet. -In some cases, you will not receive a separate notice when they connect. You -may switch off this feature or not use it. For more information about this -feature, see the software documentation. BY USING THIS FEATURE, YOU CONSENT TO -THE TRANSMISSION OF THIS INFORMATION. Microsoft does not use the information to -identify or contact you. - -Computer Information. The following feature uses Internet protocols, which send -to the appropriate systems computer information, such as your Internet protocol -address, the type of operating system, browser and name and version of the -software you are using, and the language code of the device where you installed -the software. Microsoft uses this information to make the Internet-based -service available to you. - • Digital Certificates. The software uses digital certificates. These -digital certificates confirm the identity of Internet users sending X.509 -standard encrypted information. The software retrieves certificates and updates -certificate revocation lists. These security features operate only when you use -the Internet. - -b. Misuse of Internet-based Services. You may not use this service in any way -that could harm it or impair anyone else’s use of it. You may not use the -service to try to gain unauthorized access to any service, data, account or -network by any means. - -5. TIME-SENSITIVE SOFTWARE. If the version of the software is a trial version, -the software will stop running either ninety days or one hundred eighty days -after you install it, depending on the trial version you have. You will receive -notice before it stops running. You may not be able to access data used with -the software when it stops running. - -6. PRODUCT KEYS. The software requires a key to install or access it. You are -responsible for the use of keys assigned to you. You should not share the keys -with third parties. - -7. MICROSOFT WINDOWS SOFTWARE. The software contains the Microsoft .NET -Framework 2.0 and Microsoft Data Access Component 2.8 SP1 software. These -software are part of Windows. The license terms for Windows apply to your use -of the .NET Framework 2.0 and Microsoft Data Access Component software. - -8. SQL SERVER BENCHMARK TESTING. You must obtain Microsoft’s prior written -approval to disclose to a third party the results of any benchmark test of the -SQL Server software that accompanies this software. - -9. MICROSOFT .NET FRAMEWORK BENCHMARK TESTING. The software includes the .NET -Framework component of the Windows operating systems (“.NET Component”). You -may conduct internal benchmark testing of the .NET Component. You may disclose -the results of any benchmark test of the .NET Component, provided that you -comply with the following terms: (1) you must disclose all the information -necessary for replication of the tests, including complete and accurate details -of your benchmark testing methodology, the test scripts/cases, tuning -parameters applied, hardware and software platforms tested, the name and version -number of any third party testing tool used to conduct the testing, and complete -source code for the benchmark suite/harness that is developed by or for you and -used to test both the .NET Component and the competing implementation(s); (2) -you must disclose the date (s) that you conducted the benchmark tests, along -with specific version information for all Microsoft software products tested, -including the .NET Component; (3) your benchmark testing was performed using all -performance tuning and best practice guidance set forth in the product -documentation and/or on Microsoft’s support web sites, and uses the latest -updates, patches and fixes available for the .NET Component and the relevant -Microsoft operating system; (4) it shall be sufficient if you make the -disclosures provided for above at a publicly available location such as a -website, so long as every public disclosure of the results of your benchmark -test expressly identifies the public site containing all required disclosures; -and (5) nothing in this provision shall be deemed to waive any other right that -you may have to conduct benchmark testing. The foregoing obligations shall not -apply to your disclosure of the results of any customized benchmark test of the -.NET Component, whereby such disclosure is made under confidentiality in -conjunction with a bid request by a prospective customer, such customer’s -application(s) are specifically tested and the results are only disclosed to -such specific customer. Notwithstanding any other agreement you may have with -Microsoft, if you disclose such benchmark test results, Microsoft shall have the -right to disclose the results of benchmark tests it conducts of your products -that compete with the .NET Component, provided it complies with the same -conditions above. - -10. SCOPE OF LICENSE. The software is licensed, not sold. This agreement only -gives you some rights to use the software. Microsoft reserves all other rights. - Unless applicable law gives you more rights despite this limitation, you may -use the software only as expressly permitted in this agreement. In doing so, -you must comply with any technical limitations in the software that only allow -you to use it in certain ways. For more information, see -www.microsoft.com/licensing/userights. You may not - • work around any technical limitations in the software; - • reverse engineer, decompile or disassemble the software, except and only to -the extent that applicable law expressly permits, despite this limitation; - • make more copies of the software than specified in this agreement or allowed -by applicable law, despite this limitation; - • publish the software for others to copy; - • rent, lease or lend the software; or - • use the software for commercial software hosting services. - -11. BACKUP COPY. You may make one backup copy of the software. You may use it -only to reinstall the software. - -12. DOCUMENTATION. Any person that has valid access to your computer or -internal network may copy and use the documentation for your internal, reference -purposes. - -13. NOT FOR RESALE SOFTWARE. You may not sell software marked as “NFR” or “Not -for Resale.” - -14. ACADEMIC EDITION SOFTWARE. You must be a “Qualified Educational User” to -use software marked as “Academic Edition” or “AE.” If you do not know whether -you are a Qualified Educational User, visit www.microsoft.com/education or -contact the Microsoft affiliate serving your country. - -15. UPGRADE. If this software is marked as an upgrade version, you may use it -only if you have a license to use the software eligible for upgrade. If you -upgrade, this software takes the place of the earlier version, and this -agreement takes the place of the agreement for that earlier version. You may -use the earlier version only as permitted in the Downgrade clause below. - -16. DOWNGRADE. You may install and use this version and an earlier version of -the software at the same time. This agreement applies to your use of the -earlier version. If the earlier version includes different components, any - -terms for those components in the agreement that comes with the earlier version -apply to your use of them. Microsoft is not obligated to supply earlier -versions to you. - -17. TRANSFER TO A THIRD PARTY. The first user of the software may transfer it, -and this agreement, directly to a third party. Before the transfer, that party -must agree that this agreement applies to the transfer and use of the software. - The first user must uninstall the software before transferring it separately -from the device. The first user may not retain any copies. - -18. EXPORT RESTRICTIONS. The software is subject to United States export laws -and regulations. You must comply with all domestic and international export -laws and regulations that apply to the software. These laws include -restrictions on destinations, end users and end use. For additional -information, see www.microsoft.com/exporting. - -19. SUPPORT SERVICES. Microsoft provides support services for the software as -described at www.support.microsoft.com/common/international.aspx. - -20. ENTIRE AGREEMENT. This agreement (including the warranty below), and the -terms for supplements, updates, Internet-based services and support services -that you use, are the entire agreement for the software and support services. - -21. APPLICABLE LAW. - -a. United States. If you acquired the software in the United States, Washington -state law governs the interpretation of this agreement and applies to claims for -breach of it, regardless of conflict of laws principles. The laws of the state -where you live govern all other claims, including claims under state consumer -protection laws, unfair competition laws, and in tort. - -b. Outside the United States. If you acquired the software in any other -country, the laws of that country apply. - -22. LEGAL EFFECT. This agreement describes certain legal rights. You may have -other rights under the laws of your state or country. You may also have rights -with respect to the party from whom you acquired the software. This agreement -does not change your rights under the laws of your state or country if the laws -of your state or country do not permit it to do so. - -23. LIMITATION ON AND EXCLUSION OF DAMAGES. YOU CAN RECOVER FROM MICROSOFT AND -ITS SUPPLIERS ONLY DIRECT DAMAGES UP TO THE AMOUNT YOU PAID FOR THE SOFTWARE. -YOU CANNOT RECOVER ANY OTHER DAMAGES, INCLUDING CONSEQUENTIAL, LOST PROFITS, -SPECIAL, INDIRECT OR INCIDENTAL DAMAGES. -This limitation applies to - • anything related to the software, services, content (including code) on -third party Internet sites, or third party programs; and - • claims for breach of contract, breach of warranty, guarantee or condition, -strict liability, negligence, or other tort to the extent permitted by -applicable law. - -It also applies even if - • repair, replacement or a refund for the software does not fully compensate -you for any losses; or - • Microsoft knew or should have known about the possibility of the damages. - -Some states do not allow the exclusion or limitation of incidental or -consequential damages, so the above limitation or exclusion may not apply to -you. They also may not apply to you because your country may not allow the -exclusion or limitation of incidental, consequential or other damages. - -************************************************************************************** -LIMITED WARRANTY -A. LIMITED WARRANTY. If you follow the instructions, the software will perform -substantially as described in the Microsoft materials that you receive in or -with the software. - -B. TERM OF WARRANTY; WARRANTY RECIPIENT; LENGTH OF ANY IMPLIED WARRANTIES. THE -LIMITED WARRANTY COVERS THE SOFTWARE FOR ONE YEAR AFTER ACQUIRED BY THE FIRST -USER. IF YOU RECEIVE SUPPLEMENTS, UPDATES, OR REPLACEMENT SOFTWARE DURING THAT -YEAR, THEY WILL BE COVERED FOR THE REMAINDER OF THE WARRANTY OR 30 DAYS, -WHICHEVER IS LONGER. If the first user transfers the software, the remainder of -the warranty will apply to the recipient. -TO THE EXTENT PERMITTED BY LAW, ANY IMPLIED WARRANTIES, GUARANTEES OR CONDITIONS -LAST ONLY DURING THE TERM OF THE LIMITED WARRANTY. Some states do not allow -limitations on how long an implied warranty lasts, so these limitations may not -apply to you. They also might not apply to you because some countries may not -allow limitations on how long an implied warranty, guarantee or condition lasts. - -C. EXCLUSIONS FROM WARRANTY. This warranty does not cover problems caused by -your acts (or failures to act), the acts of others, or events beyond Microsoft’s -reasonable control. - -D. REMEDY FOR BREACH OF WARRANTY. MICROSOFT WILL REPAIR OR REPLACE THE SOFTWARE -AT NO CHARGE. IF MICROSOFT CANNOT REPAIR OR REPLACE IT, MICROSOFT WILL REFUND -THE AMOUNT SHOWN ON YOUR RECEIPT FOR THE SOFTWARE. IT WILL ALSO REPAIR OR -REPLACE SUPPLEMENTS, UPDATES AND REPLACEMENT SOFTWARE AT NO CHARGE. IF -MICROSOFT CANNOT REPAIR OR REPLACE THEM, IT WILL REFUND THE AMOUNT YOU PAID FOR -THEM, IF ANY. YOU MUST UNINSTALL THE SOFTWARE AND RETURN ANY MEDIA AND OTHER -ASSOCIATED MATERIALS TO MICROSOFT WITH PROOF OF PURCHASE TO OBTAIN A REFUND. -THESE ARE YOUR ONLY REMEDIES FOR BREACH OF THE LIMITED WARRANTY. - -E. CONSUMER RIGHTS NOT AFFECTED. YOU MAY HAVE ADDITIONAL CONSUMER RIGHTS UNDER -YOUR LOCAL LAWS, WHICH THIS AGREEMENT CANNOT CHANGE. - -F. WARRANTY PROCEDURES. You need proof of purchase for warranty service. - -1. United States and Canada. For warranty service or information about how to -obtain a refund for software acquired in the United States and Canada, contact -Microsoft at - • (800) MICROSOFT; - • Microsoft Customer Service and Support, One Microsoft Way, Redmond, WA -98052-6399; or - • visit www.microsoft.com/info/nareturns.htm. - -2. Europe, Middle East and Africa. If you acquired the software in Europe, the -Middle East or Africa, Microsoft Ireland Operations Limited makes this limited -warranty. To make a claim under this warranty, you should contact either - • Microsoft Ireland Operations Limited, Customer Care Centre, Atrium Building -Block B, Carmanhall Road, Sandyford Industrial Estate, Dublin 18, Ireland; or - • the Microsoft affiliate serving your country (see www.microsoft.com/worldwide). - -3. Outside United States, Canada, Europe, Middle East and Africa. If you -acquired the software outside the United States, Canada, Europe, the Middle East -and Africa, contact the Microsoft affiliate serving your country (see -www.microsoft.com/worldwide). - -G. NO OTHER WARRANTIES. THE LIMITED WARRANTY IS THE ONLY DIRECT WARRANTY FROM -MICROSOFT. MICROSOFT GIVES NO OTHER EXPRESS WARRANTIES, GUARANTEES OR -CONDITIONS. WHERE ALLOWED BY YOUR LOCAL LAWS, MICROSOFT EXCLUDES IMPLIED -WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -NON-INFRINGEMENT. If your local laws give you any implied warranties, -guarantees or conditions, despite this exclusion, your remedies are described in -the Remedy for Breach of Warranty clause above, to the extent permitted by your -local laws. - -H. LIMITATION ON AND EXCLUSION OF DAMAGES FOR BREACH OF WARRANTY. THE -LIMITATION ON AND EXCLUSION OF DAMAGES CLAUSE ABOVE APPLIES TO BREACHES OF THIS -LIMITED WARRANTY. - -THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER -RIGHTS WHICH VARY FROM STATE TO STATE. YOU MAY ALSO HAVE OTHER RIGHTS WHICH -VARY FROM COUNTRY TO COUNTRY. - -Please note: As this software is distributed in Quebec, Canada, some of the -clauses in this agreement are provided below in French. - -Remarque : Ce logiciel étant distribué au Québec, Canada, certaines des clauses -dans ce contrat sont fournies ci-dessous en français. - -GARANTIE LIMITÉE - -A. GARANTIE LIMITÉE. Si vous suivez les instructions, le logiciel fonctionnera -dans son ensemble comme il est décrit dans la documentation de Microsoft reçue -avec ou dans le logiciel. - -B. DURÉE DE LA GARANTIE ; BÉNÉFICIAIRE DE LA GARANTIE ; DURÉE DE TOUTE GARANTIE -IMPLICITE. La garantie limitée couvre le logiciel pendant un an après son -acquisition par le premier utilisateur. Si vous recevez des compléments, des -mises à jour ou un logiciel de remplacement au cours de cette année, ils seront -couverts par la garantie pendant la durée restante ou pendant 30 jours, la -période la plus longue étant retenue. Si le premier utilisateur transfère le -logiciel, la durée restante de la garantie s’applique au destinataire. -Dans la limite autorisée par la loi en vigueur, toute garantie ou condition -implicite dont vous bénéficiez prendra fin au terme de la garantie limitée. -Certains États n’autorisent pas les limitations portant sur la durée d’une -garantie implicite, de sorte que les limitations ci-dessus peuvent ne pas vous -être applicables. Elles peuvent également ne pas vous être applicables, car -certains pays n’autorisent pas les limitations portant sur la durée d’une -garantie ou condition implicite. - -C. EXCLUSIONS DE LA GARANTIE. Cette garantie ne couvre pas les problèmes -engendrés par vos propres actes (ou absences d’actes), ceux de tiers ou tout -autre événement indépendant de la volonté de Microsoft. - -D. RECOURS DANS LE CADRE DE LA VIOLATION DE GARANTIE. Nous nous engageons à -réparer ou à remplacer le logiciel gratuitement. Si nous ne pouvons pas le -réparer ni le remplacer, nous rembourserons le montant que vous avez payé pour -le logiciel figurant sur le reçu. Nous nous engageons à réparer ou à remplacer -les compléments, les mises à jour et le logiciel de remplacement gratuitement. -Si nous ne pouvons pas les réparer ni les remplacer, nous rembourserons le -montant que vous avez payé pour ces composants, le cas échéant. Vous devez -désinstaller le logiciel et le renvoyer à Microsoft avec une preuve d’achat pour -vous faire rembourser. Ces recours sont les seuls dont vous disposez dans le -cadre de la violation de garantie limitée. - -E. DROITS DES CONSOMMATEURS NON AFFECTÉS. Vous pouvez bénéficier de droits des -consommateurs supplémentaires dans le cadre du droit local, que ce contrat ne -peut modifier. - -F. PROCÉDURES RELATIVES AUX RÉCLAMATIONS DANS LE CADRE DE LA GARANTIE. Vous -devrez fournir une preuve d’achat pour obtenir de l’aide en matière de garantie. - -1. États-Unis et Canada. Pour obtenir de l’aide en matière de garantie ou des -informations sur la procédure à suivre pour vous faire rembourser un logiciel -acquis aux États-Unis et au Canada, mettez-vous en rapport avec Microsoft - • (800) MICROSOFT ; - • Microsoft Customer Service and Support, One Microsoft Way, Redmond, WA -98052-6399 ; ou - • en visitant www.microsoft.com/info/nareturns.htm. - -2. Europe, Moyen-Orient et Afrique. Si vous avez acquis le logiciel en Europe, -au Moyen-Orient ou en Afrique, Microsoft Ireland Operations Limited offre cette -garantie limitée. Pour faire une réclamation au titre de cette garantie, vous -devez vous mettre en rapport avec - • Microsoft Ireland Operations Limited, Customer Care Centre, Atrium Building -Block B, Carmanhall Road, Sandyford Industrial Estate, Dublin 18, Irlande ; ou - • votre filiale nationale de Microsoft (visitez le site -www.microsoft.com/worldwide). - -3. En dehors des États-Unis, du Canada, de l’Europe, du Moyen-Orient et de -l’Afrique. Si vous avez acquis le logiciel en dehors des États-Unis, du Canada, -de l’Europe, du Moyen-Orient et de l’Afrique, mettez-vous en rapport avec votre -filiale nationale de Microsoft (visitez le site www.microsoft.com/worldwide). - -G. AUCUNE AUTRE GARANTIE. La garantie limitée est la seule garantie directe de -Microsoft. Nous n’accordons aucune autre garantie ou condition expresse. Dans -toute la mesure permise par le droit local, les garanties implicites de qualité -marchande, d’adéquation à un usage particulier et d’absence de contrefaçon sont -exclues. Si le droit local vous accorde des garanties ou conditions implicites, -nonobstant la présente exclusion, les recours dont vous disposez sont ceux -présentés dans la clause de recours dans le cadre de la violation de garantie -ci-dessus, dans la limite autorisée par le droit local. - -H. LIMITATION DES DOMMAGES-INTÉRÊTS ET EXCLUSION DE RESPONSABILITÉ DANS LE CADRE -DE LA VIOLATION DE GARANTIE. La clause de limitation des dommages-intérêts et -exclusion de responsabilité ci-dessous s’applique aux violations de cette -garantie limitée. - -La présente garantie vous confère des droits légaux spécifiques et vous pouvez -également bénéficier d’autres droits qui varient d’un État à l’autre. Vous -pouvez également bénéficier d’autres droits qui varient d’un pays à l’autre. - -LIMITATION DES DOMMAGES-INTÉRÊTS ET EXCLUSION DE RESPONSABILITÉ POUR LES -DOMMAGES. Vous pouvez obtenir de Microsoft et de ses fournisseurs une -indemnisation en cas de dommages directs uniquement à hauteur du montant que -vous avez payé pour le logiciel. Vous ne pouvez prétendre à aucune indemnisation -pour les autres dommages, y compris les dommages spéciaux, indirects ou -accessoires et pertes de bénéfices. - -Cette limitation concerne - • toute affaire liée au logiciel, aux services ou au contenu (y compris le -code) figurant sur des sites Internet tiers ou dans des programmes tiers ; et - • les réclamations au titre de violation de contrat ou de garantie ou -condition, ou au titre de responsabilité stricte, de négligence ou d’une autre -faute dans la limite autorisée par la loi en vigueur. - -Elle s’applique également, même si - • la réparation, le remplacement ou le remboursement du logiciel ne compense -pas intégralement toute perte subie ; ou - • Microsoft connaissait l’éventualité d’un tel dommage. - -Certains États n’autorisent pas l’exclusion ou la limitation de responsabilité -pour les dommages indirects ou accessoires, de sorte que la limitation ou -l’exclusion ci-dessus peut ne pas vous être applicable. Elles peuvent également -ne pas vous être applicables, car votre pays n’autorise pas l’exclusion ou la -limitation de responsabilité pour les dommages indirects, accessoires ou de -quelque nature que ce soit. - -EFFET JURIDIQUE. Le présent contrat décrit certains droits juridiques. Vous -pourriez avoir d’autres droits prévus par les lois de votre État ou pays. Vous -pourriez également avoir des droits à l’égard de la partie de qui vous avez -acquis de logiciel. Le présent contrat ne modifie pas les droits que vous -confèrent les lois de votre État ou pays si celles ci ne le permettent pas. - -*************************************************************************** +You should have received a copy of the Common Public License along with this +library. diff --git a/source/l/jre/Welcome.html b/source/l/jre/Welcome.html index c55c68a6f..c4bdc518e 100644 --- a/source/l/jre/Welcome.html +++ b/source/l/jre/Welcome.html @@ -18,7 +18,7 @@ documentation for more information on using the Java Plug-in product. <p> See the <a href=http://java.sun.com/javase>Java Platform</a> web site for more information on the Java Platform. <hr> -<font size="-2">Copyright 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa +<font size="-2">Copyright 2010 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A.<BR> All rights reserved.</font> <p> diff --git a/source/l/jre/jre.SlackBuild b/source/l/jre/jre.SlackBuild index 260c6176a..70e775c67 100755 --- a/source/l/jre/jre.SlackBuild +++ b/source/l/jre/jre.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,8 +23,8 @@ # Note that the slack-desc file mentions the JRE version (edit when upgrading)! -VERSION=6u16 -DVER=1.6.0_16 +VERSION=6u20 +DVER=1.6.0_20 ARCH=x86_64 BUILD=${BUILD:-1} diff --git a/source/l/jre/slack-desc b/source/l/jre/slack-desc index 20df6be84..aa0151538 100644 --- a/source/l/jre/slack-desc +++ b/source/l/jre/slack-desc @@ -6,7 +6,7 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| jre: Java(TM) 2 Platform Standard Edition Runtime Environment, -jre: Version 6.0 update 16. +jre: Version 6.0 update 20. jre: jre: The J2SE(TM) Runtime Environment (JRE) is intended for software jre: developers and vendors to redistribute with their applications. diff --git a/source/l/lcms/lcms.SlackBuild b/source/l/lcms/lcms.SlackBuild index 4510d2cf4..19efaa314 100755 --- a/source/l/lcms/lcms.SlackBuild +++ b/source/l/lcms/lcms.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.18 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo lcms-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +59,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf lcms-$VERSION -tar xvf $CWD/lcms-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/lcms-$VERSION.tar.?z* || exit 1 cd lcms-$VERSION chown -R root:root . find . \ @@ -77,6 +90,14 @@ cp -a \ $PKG/usr/doc/lcms-$VERSION find $PKG/usr/doc/lcms-$VERSION -type f -exec chmod 644 {} \; +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/lesstif/lesstif.SlackBuild b/source/l/lesstif/lesstif.SlackBuild index cb169ad7f..70f888505 100755 --- a/source/l/lesstif/lesstif.SlackBuild +++ b/source/l/lesstif/lesstif.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,18 @@ PKGNAM=lesstif -VERSION=${VERSION:-0.95.0} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-5} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -43,11 +52,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 if [ "$ARCH" = "x86_64" ]; then @@ -56,8 +68,6 @@ if [ "$ARCH" = "x86_64" ]; then zcat $CWD/lesstif.x86_64.patch.gz | patch -p1 --verbose || exit 1 fi -zcat $CWD/lesstif.gcc42.diff.gz | patch -p1 --verbose || exit 1 - # Check for NULL w in RenderTable.c to prevent possible crashes in # "experimental" code path: zcat $CWD/lesstif.rendertable.check.diff.gz | patch -p1 --verbose || exit 1 @@ -76,6 +86,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc/X11 \ + --mandir=/usr/man \ --enable-shared \ --enable-static \ --enable-build-21 \ @@ -105,6 +116,15 @@ rmdir $PKG/usr/lib${LIBDIRSUFFIX}/LessTif mkdir $PKG/usr/doc mv doc $PKG/usr/doc/lesstif-${VERSION} ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + rmdir $PKG/usr/LessTif mkdir -p $PKG/etc/X11 mv $PKG/usr/lib${LIBDIRSUFFIX}/X11/app-defaults $PKG/etc/X11 diff --git a/source/l/lesstif/lesstif.gcc42.diff b/source/l/lesstif/lesstif.gcc42.diff deleted file mode 100644 index 5c3bf12ad..000000000 --- a/source/l/lesstif/lesstif.gcc42.diff +++ /dev/null @@ -1,23 +0,0 @@ ---- ./include/Motif-2.1/Xm/VendorSP.h.orig 2004-08-28 14:23:27.000000000 -0500 -+++ ./include/Motif-2.1/Xm/VendorSP.h 2009-03-16 15:29:38.000000000 -0500 -@@ -30,10 +30,6 @@ - #include <Xm/VendorS.h> - #include <X11/ShellP.h> - --#ifdef __cplusplus --extern "C" { --#endif -- - XMLIBEXPORT extern Cardinal _XmFilterResources(XtResource *resources, - Cardinal numResources, - WidgetClass filterClass, -@@ -57,9 +53,4 @@ - - XMLIBEXPORT extern VendorShellClassRec vendorShellClassRec; - -- --#ifdef __cplusplus --} --#endif -- - #endif /* _XM_VENDORSP_H */ diff --git a/source/l/libaio/libaio-0.3.109.tar.sign b/source/l/libaio/libaio-0.3.109.tar.sign new file mode 100644 index 000000000..e9e6186e3 --- /dev/null +++ b/source/l/libaio/libaio-0.3.109.tar.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBKz65OyGugalF9Dw4RAgZcAJwLPiBtx6k3XSh9KZf48MEjAssKYQCfZtuu +5+ttTF5tbBlF0vt9GZdLEiQ= +=IQ5R +-----END PGP SIGNATURE----- diff --git a/source/l/libaio/libaio.SlackBuild b/source/l/libaio/libaio.SlackBuild index be3c1a1c3..4d6502013 100755 --- a/source/l/libaio/libaio.SlackBuild +++ b/source/l/libaio/libaio.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,21 @@ PKGNAM=libaio -VERSION=${VERSION:-0.3.106} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -41,7 +51,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.gz || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -95,9 +105,17 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - COPYING ChangeLog INSTALL TODO \ + COPYING* INSTALL TODO README* \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libarchive/libarchive.SlackBuild b/source/l/libarchive/libarchive.SlackBuild index 976b3841d..2133e0739 100755 --- a/source/l/libarchive/libarchive.SlackBuild +++ b/source/l/libarchive/libarchive.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,17 +23,25 @@ # Modified by Robby Workman <rworkman@slackware.com> - -PRGNAM=libarchive -VERSION=2.6.2 -ARCH=${ARCH:-x86_64} +PKGNAM=libarchive +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -44,14 +52,17 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -82,12 +93,12 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a COPYING INSTALL NEWS README $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a COPYING* INSTALL NEWS README* $PKG/usr/doc/$PKGNAM-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libcap/libcap-2.16.tar.bz2.sign b/source/l/libcap/libcap-2.16.tar.bz2.sign deleted file mode 100644 index d4925d762..000000000 --- a/source/l/libcap/libcap-2.16.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.4.9 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQBJN4JLyGugalF9Dw4RAiqLAJ9L42xfkqkbmmTyQJulpL8VoRjurwCeJkLj -oLAyJMYhVE31Kumb66LU5c8= -=UTrX ------END PGP SIGNATURE----- diff --git a/source/l/libcap/libcap-2.19.tar.bz2.sign b/source/l/libcap/libcap-2.19.tar.bz2.sign new file mode 100644 index 000000000..23e2c3988 --- /dev/null +++ b/source/l/libcap/libcap-2.19.tar.bz2.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLTn0myGugalF9Dw4RAkEcAJ9zpWMkph0bSL/WfNPHtIayydTUOQCeMoiN +DC9y+17zdyaaieDE7aH2rfs= +=YEBM +-----END PGP SIGNATURE----- diff --git a/source/l/libcap/libcap.SlackBuild b/source/l/libcap/libcap.SlackBuild index e7603570e..f77ad6e51 100755 --- a/source/l/libcap/libcap.SlackBuild +++ b/source/l/libcap/libcap.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,13 +23,22 @@ # Originally written by Menno Duursma -PRGNAM=libcap -VERSION=${VERSION:-2.16} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=libcap +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -49,14 +58,14 @@ fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 zcat $CWD/libcap.capability.h.fix.broken.includes.diff.gz | patch -p1 || exit 1 @@ -72,11 +81,17 @@ sed -i.orig "s/^\(DEBUG =\).*/\1$SLKCFLAGS/" Make.Rules make DYNAMIC=yes $NUMJOBS || make DYNAMIC=yes || exit 1 make install FAKEROOT=$PKG man_prefix=/usr || exit 1 -chmod 755 $PKG/lib/libcap.so* +chmod 755 $PKG/lib${LIBDIRSUFFIX}/libcap.so* find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# Static libs are better placed under /usr: +if [ -r $PKG/lib${LIBDIRSUFFIX}/libcap.a ]; then + mkdir -p $PKG/usr/lib${LIBDIRSUFFIX} + mv $PKG/lib${LIBDIRSUFFIX}/libcap.a $PKG/usr/lib${LIBDIRSUFFIX} +fi + # Add included scripts ( cd contrib || exit 1 for file in pcaps4convenience pcaps4server pcaps4suid0 ; do @@ -93,11 +108,11 @@ rm -rf $PKG/usr/man/man2 for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ CHANGELOG License README License pgp.keys.asc doc/capability.notes \ progs/quicktest.sh $CWD/capfaq-0.2.txt $CWD/README.SLACKWARE \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION chown -R root:root $PKG/usr/doc find $PKG/usr/doc -type f -exec chmod 644 {} \; @@ -105,5 +120,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libcdio/libcdio.SlackBuild b/source/l/libcdio/libcdio.SlackBuild index dc4f891b8..9379591fb 100755 --- a/source/l/libcdio/libcdio.SlackBuild +++ b/source/l/libcdio/libcdio.SlackBuild @@ -22,7 +22,7 @@ PKGNAM=libcdio -VERSION=${VERSION:-$(echo $(basename $(echo $PRGNAM-*.tar.bz2 | cut -f 2 -d -) .tar.bz2) | cut -f 2 -d -)} +VERSION=${VERSION:-$(echo $(basename $(echo $PKGNAM-*.tar.bz2 | cut -f 2 -d -) .tar.bz2) | cut -f 2 -d -)} ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-2} diff --git a/source/l/libgtkhtml/libgtkhtml.SlackBuild b/source/l/libdiscid/libdiscid.SlackBuild index c22966fd3..f30ed7bf8 100755 --- a/source/l/libgtkhtml/libgtkhtml.SlackBuild +++ b/source/l/libdiscid/libdiscid.SlackBuild @@ -1,6 +1,7 @@ -#!/bin/sh +#!/bin/bash -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,19 +22,26 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=libgtkhtml -VERSION=${VERSION:-2.11.1} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} - +PKGNAM=libdiscid +VERSION=${VERSION:-0.2.2} +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-${PKGNAM} +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -43,20 +51,23 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 -cd ${PKGNAM}-$VERSION +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; # Configure: CFLAGS="$SLKCFLAGS" \ @@ -64,12 +75,10 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ - --localstatedir=/var/lib \ - --mandir=/usr/man \ --disable-static \ + --mandir=/usr/man \ --program-prefix= \ --program-suffix= \ - --disable-accessibility \ --build=$ARCH-slackware-linux # Build and install: @@ -77,8 +86,8 @@ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 # Strip binaries: -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then @@ -95,23 +104,15 @@ if [ -d $PKG/usr/man ]; then ) fi -# Compress info files, if any: -if [ -d $PKG/usr/info ]; then - ( cd $PKG/usr/info - rm -f dir - gzip -9 * - ) -fi - # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING.LIB INSTALL NEWS README TODO docs/IDEAS \ + AUTHORS COPYING ChangeLog README \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libdiscid/slack-desc b/source/l/libdiscid/slack-desc new file mode 100644 index 000000000..d0455bdb5 --- /dev/null +++ b/source/l/libdiscid/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libdiscid: libdiscid (library to generate DiscIDs from audio CDs) +libdiscid: +libdiscid: libdiscid creates MusicBrainz DiscIDs from audio CDs. +libdiscid: It reads the table of contents (TOC) of a CD and generates +libdiscid: an identifier which can be used to lookup the CD at MusicBrainz. +libdiscid: Additionally, it provides a submission URL for adding the DiscID +libdiscid: to the database. +libdiscid: +libdiscid: +libdiscid: Home: http://musicbrainz.org/doc/libdiscid +libdiscid: diff --git a/source/l/libexif/libexif.SlackBuild b/source/l/libexif/libexif.SlackBuild index db9f6f4c6..3fce2befa 100755 --- a/source/l/libexif/libexif.SlackBuild +++ b/source/l/libexif/libexif.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.6.16 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo libexif-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -45,7 +58,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf libexif-$VERSION -tar xvf $CWD/libexif-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libexif-$VERSION.tar.?z* || exit 1 cd libexif-$VERSION zcat $CWD/libexif.pc.diff.gz | patch -p1 --verbose || exit 1 chown -R root:root . @@ -78,6 +91,14 @@ cp -a \ ABOUT-NLS AUTHORS COPYING NEWS README \ $PKG/usr/doc/libexif-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libglade/libglade.SlackBuild b/source/l/libglade/libglade.SlackBuild index c9153b506..d8973a4e7 100755 --- a/source/l/libglade/libglade.SlackBuild +++ b/source/l/libglade/libglade.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.6.4} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo libglade-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -40,12 +49,15 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -tar xvf $CWD/libglade-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libglade-$VERSION.tar.?z* || exit 1 cd libglade-$VERSION || exit 1 chown -R root:root . find . \ @@ -70,6 +82,10 @@ make install DESTDIR=$PKG # Hello! --enable-static=no seemed to mean something when ./configure ran... rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libglade*.a +## [make that, we _wish_ these .la files _could_ go] +## These .la files can go. +#rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libglade*.la + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -81,6 +97,14 @@ cp -a \ ln -s /usr/share/gtk-doc/html/libglade html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libgphoto2/libgphoto2.SlackBuild b/source/l/libgphoto2/libgphoto2.SlackBuild index fec05df70..fb3efe162 100755 --- a/source/l/libgphoto2/libgphoto2.SlackBuild +++ b/source/l/libgphoto2/libgphoto2.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007-2008 Frank Caraballo <fecaraballo{at}gmail{dot}com> -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=libgphoto2 -VERSION=2.4.6 -ARCH=${ARCH:-x86_64} +PKGNAM=libgphoto2 +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -41,18 +50,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -67,8 +79,8 @@ CXXFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --disable-static \ --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ - --with-doc-dir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --with-doc-dir=/usr/doc/$PKGNAM-$VERSION \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 @@ -94,7 +106,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ # Generate udev rules and hal device information files # First, we'll have to set (and export) some important variables LD_LIBRARY_PATH=$PKG/usr/lib${LIBDIRSUFFIX} -CAMLIBS=$PKG/usr/lib${LIBDIRSUFFIX}/$PRGNAM/$VERSION +CAMLIBS=$PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/$VERSION LIBDIR=$PKG/usr/lib${LIBDIRSUFFIX} export LD_LIBRARY_PATH CAMLIBS LIBDIR # Generate udev rules @@ -115,30 +127,37 @@ unset LD_LIBRARY_PATH CAMLIBS LIBDIR # Unset these just in case for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* HACKING INSTALL MAINTAINERS \ NEWS README* TESTERS \ - $PKG/usr/doc/$PRGNAM-$VERSION -# The entire ChangeLog is excessive for most users: -cat $PKG/usr/doc/$PRGNAM-$VERSION/ChangeLog | head -n 1000 > $PKG/usr/doc/$PRGNAM-$VERSION/CL -mv $PKG/usr/doc/$PRGNAM-$VERSION/CL $PKG/usr/doc/$PRGNAM-$VERSION/ChangeLog + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # The apidocs are huge, and probably only of interest to developers who will # very likely use the source code as a reference: -rm -r $PKG/usr/doc/$PRGNAM-$VERSION/apidocs.html -cat << EOF > $PKG/usr/doc/$PRGNAM-$VERSION/apidocs.html/README +rm -r $PKG/usr/doc/$PKGNAM-$VERSION/apidocs.html +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/apidocs.html +cat << EOF > $PKG/usr/doc/$PKGNAM-$VERSION/apidocs.html/README The complete API documentation may be found in the libgphoto2 source code archive. EOF # This library is not built, but it is useful for users to know why that is: -cp -a camlibs/jl2005a/README.jl2005a $PKG/usr/doc/$PRGNAM-$VERSION/camlibs -chmod 644 $PKG/usr/doc/$PRGNAM-$VERSION/camlibs/README.jl2005a -chown root:root $PKG/usr/doc/$PRGNAM-$VERSION/camlibs/README.jl2005a +cp -a camlibs/jl2005a/README.jl2005a $PKG/usr/doc/$PKGNAM-$VERSION/camlibs +chmod 644 $PKG/usr/doc/$PKGNAM-$VERSION/camlibs/README.jl2005a +chown root:root $PKG/usr/doc/$PKGNAM-$VERSION/camlibs/README.jl2005a mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libgsf/libgsf.SlackBuild b/source/l/libgsf/libgsf.SlackBuild index 004a3b1fd..16d6a2dcc 100755 --- a/source/l/libgsf/libgsf.SlackBuild +++ b/source/l/libgsf/libgsf.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,24 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.14.15 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo libgsf-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-libgsf -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -41,11 +49,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf libgsf-$VERSION -tar xvf $CWD/libgsf-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libgsf-$VERSION.tar.?z* || exit 1 cd libgsf-$VERSION || exit 1 chown -R root:root . find . \ @@ -64,7 +77,6 @@ CFLAGS="$SLKCFLAGS" \ --mandir=/usr/man \ --disable-static \ --without-gnome-vfs \ - --without-gio \ --without-bonobo \ --build=$ARCH-slackware-linux @@ -93,6 +105,14 @@ cp -a \ AUTHORS BUGS COPYING* HACKING NEWS README TODO \ $PKG/usr/doc/libgsf-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libiodbc/libiodbc.SlackBuild b/source/l/libiodbc/libiodbc.SlackBuild new file mode 100755 index 000000000..4ea1f6f54 --- /dev/null +++ b/source/l/libiodbc/libiodbc.SlackBuild @@ -0,0 +1,122 @@ +#!/bin/sh + +# Copyright 2009, 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VERSION=3.52.7 +BUILD=${BUILD:-2} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-libiodbc + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf libiodbc-$VERSION +tar xvf $CWD/libiodbc-$VERSION.tar.?z* || exit 1 +cd libiodbc-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +# We add '--disable-libodbc'. This way, a libodbc.so library does not get +# installed so that this package won't clash with an already present unixodbc. +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --docdir=/usr/doc/libiodbc-$VERSION \ + --disable-static \ + --disable-libodbc \ + --program-prefix= \ + --program-suffix= \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/libiodbc-$VERSION +cp -a \ + AUTHORS COPYING* ChangeLog INSTALL README TODO \ + $PKG/usr/doc/libiodbc-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/libiodbc-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/libiodbc/slack-desc b/source/l/libiodbc/slack-desc new file mode 100644 index 000000000..6844c9274 --- /dev/null +++ b/source/l/libiodbc/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +libiodbc: libiodbc (Independent Open DataBase Connectivity) +libiodbc: +libiodbc: iODBC is the acronym for Independent Open DataBase Connectivity, +libiodbc: an Open Source platform independent implementation of both the ODBC +libiodbc: and X/Open specifications. It allows for developing solutions +libiodbc: that are language, platform and database independent. +libiodbc: +libiodbc: +libiodbc: +libiodbc: Homepage: http://iodbc.org/ +libiodbc: diff --git a/source/l/libjpeg/jpeg-6b.diff b/source/l/libjpeg/jpeg-6b.diff deleted file mode 100644 index 8ad8bb5db..000000000 --- a/source/l/libjpeg/jpeg-6b.diff +++ /dev/null @@ -1,59 +0,0 @@ ---- makefile.cfg.orig Sat Mar 21 13:08:57 1998 -+++ makefile.cfg Tue Oct 6 19:15:26 1998 -@@ -21,6 +21,8 @@ - - # The name of your C compiler: - CC= @CC@ -+SONAME=libjpeg.so.62 -+SHLIBNAME=libjpeg.so.62.0.0 - - # You may need to adjust these cc options: - CFLAGS= @CFLAGS@ @CPPFLAGS@ @INCLUDEFLAGS@ -@@ -125,6 +127,7 @@ - jdsample.$(O) jdcolor.$(O) jquant1.$(O) jquant2.$(O) jdmerge.$(O) - # These objectfiles are included in libjpeg.a - LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -+SHLIBOBJECTS= $(LIBOBJECTS:%.o=%.so) - # object files for sample applications (excluding library files) - COBJECTS= cjpeg.$(O) rdppm.$(O) rdgif.$(O) rdtarga.$(O) rdrle.$(O) \ - rdbmp.$(O) rdswitch.$(O) cdjpeg.$(O) -@@ -133,7 +136,7 @@ - TROBJECTS= jpegtran.$(O) rdswitch.$(O) cdjpeg.$(O) transupp.$(O) - - --all: @A2K_DEPS@ libjpeg.$(A) cjpeg djpeg jpegtran rdjpgcom wrjpgcom -+all: @A2K_DEPS@ libjpeg.$(A) $(SHLIBNAME) cjpeg djpeg jpegtran rdjpgcom wrjpgcom - - # Special compilation rules to support ansi2knr and libtool. - .SUFFIXES: .lo .la -@@ -171,6 +174,11 @@ - $(LIBTOOL) --mode=link $(CC) -o libjpeg.la $(LIBOBJECTS) \ - -rpath $(libdir) -version-info $(JPEG_LIB_VERSION) - -+# shared library -+ -+$(SHLIBNAME): @A2K_DEPS@ $(SHLIBOBJECTS) -+ gcc -o $(SHLIBNAME) -Wl,-soname,$(SONAME) -shared $(SHLIBOBJECTS) -+ - # sample programs: - - cjpeg: $(COBJECTS) libjpeg.$(A) -@@ -214,7 +222,7 @@ - clean: - $(RM) *.o *.lo libjpeg.a libjpeg.la - $(RM) cjpeg djpeg jpegtran rdjpgcom wrjpgcom -- $(RM) ansi2knr core testout* config.log config.status -+ $(RM) ansi2knr core testout* config.log config.status $(SHLIBNAME) - $(RM) -r knr .libs _libs - - distclean: clean -@@ -289,6 +297,9 @@ - jidctfst.$(O): jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h - jidctint.$(O): jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h - jidctred.$(O): jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -+ -+%.so : %.c -+ $(CC) -c -fPIC $(CFLAGS) $(CPPFLAGS) $< -o $@ - jquant1.$(O): jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h - jquant2.$(O): jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h - jutils.$(O): jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h diff --git a/source/l/libjpeg/libjpeg.SlackBuild b/source/l/libjpeg/libjpeg.SlackBuild index 5ec9f0164..9d43d22ea 100755 --- a/source/l/libjpeg/libjpeg.SlackBuild +++ b/source/l/libjpeg/libjpeg.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-6b} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-5} +VERSION=${VERSION:-v8a} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -38,51 +49,58 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG -# Explode the package framework: -cd $PKG -explodepkg $CWD/_libjpeg.tar.gz -if [ "$ARCH" = "x86_64" ]; then - mv usr/lib usr/lib${LIBDIRSUFFIX} - sed -i -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" install/doinst.sh -fi - cd $TMP -rm -rf jpeg-6b -tar xzvf $CWD/jpegsrc.v6b.tar.gz -cd jpeg-6b +rm -rf jpeg-8 +tar xvf $CWD/jpegsrc.${VERSION}.tar.?z* || exit 1 +cd jpeg-$(echo $VERSION | cut -f 2 -d v) + chown -R root:root . -zcat $CWD/jpeg-6b.diff.gz | patch -p0 -E +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + export CFLAGS="$SLKCFLAGS" ./configure \ + --prefix=/usr \ + --mandir=/usr/man \ --libdir=/usr/lib${LIBDIRSUFFIX} -make -j3 || exit 1 -strip cjpeg djpeg rdjpgcom wrjpgcom jpegtran -cat cjpeg > $PKG/usr/bin/cjpeg -cat djpeg > $PKG/usr/bin/djpeg -cat jpegtran > $PKG/usr/bin/jpegtran -cat rdjpgcom > $PKG/usr/bin/rdjpgcom -cat wrjpgcom > $PKG/usr/bin/wrjpgcom -for page in cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 ; do - cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz -done -strip --strip-unneeded libjpeg.so.62.0.0 -cat libjpeg.so.62.0.0 > $PKG/usr/lib${LIBDIRSUFFIX}/libjpeg.so.62.0.0 -cat libjpeg.a > $PKG/usr/lib${LIBDIRSUFFIX}/libjpeg.a -cp -a jconfig.h jpeglib.h jmorecfg.h jerror.h $PKG/usr/include -# KDE includes this complete header list, but the libjpeg source doesn't -# suggest it, and we trust them. :) -#for file in jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h \ -# jmorecfg.h jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h jconfig.h ; do -# cp -a $file $PKG/usr/include -#done +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + mkdir -p $PKG/usr/doc/libjpeg-$VERSION -cp -a README *.doc $PKG/usr/doc/libjpeg-$VERSION -chmod 644 $PKG/usr/doc/libjpeg-$VERSION/* +cp -a README $PKG/usr/doc/libjpeg-$VERSION + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/liblastfm/liblastfm.SlackBuild b/source/l/liblastfm/liblastfm.SlackBuild new file mode 100755 index 000000000..b5d1a401b --- /dev/null +++ b/source/l/liblastfm/liblastfm.SlackBuild @@ -0,0 +1,93 @@ +#!/bin/sh + +# Slackware build script for liblastfm + +# Copyright 2009 Vincent Batts +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM="liblastfm" +VERSION=0.3.0 +BUILD=${BUILD:-2} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM + +if [ "$ARCH" = "x86_64" ]; then + LIBDIRSUFFIX="64" +else + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 +cd $PRGNAM-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Fix for Ruby 1.9.1: +sed -i "s/require 'ftools'//g" admin/* + +./configure \ + --prefix /usr \ + --release + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# For 64-bit, make sure that the libraries are in the proper directory: +if [ "$LIBDIRSUFFIX" = "64" ]; then + mv $PKG/usr/lib $PKG/usr/lib64 +fi + +if [ -d $PKG/usr/man ]; then + gzip -9 $PKG/usr/man/man?/* +fi + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + COPYING README \ + $PKG/usr/doc/$PRGNAM-$VERSION + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/liblastfm/slack-desc b/source/l/liblastfm/slack-desc new file mode 100644 index 000000000..a046a2a9f --- /dev/null +++ b/source/l/liblastfm/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +liblastfm: liblastfm (last fm library) +liblastfm: +liblastfm: The last.fm audio scrobbling service library. +liblastfm: +liblastfm: +liblastfm: +liblastfm: +liblastfm: +liblastfm: +liblastfm: +liblastfm: diff --git a/source/l/libmng/libmng.SlackBuild b/source/l/libmng/libmng.SlackBuild index 129c347c4..a40b0cf15 100755 --- a/source/l/libmng/libmng.SlackBuild +++ b/source/l/libmng/libmng.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,18 @@ PKGNAM=libmng -VERSION=${VERSION:-1.0.10} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} - +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -34,6 +41,8 @@ PKG=$TMP/package-${PKGNAM} rm -rf $PKG mkdir -p $TMP $PKG +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -43,11 +52,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: diff --git a/source/l/libmsn/libmsn.SlackBuild b/source/l/libmsn/libmsn.SlackBuild index 06b98185e..5de598ef2 100755 --- a/source/l/libmsn/libmsn.SlackBuild +++ b/source/l/libmsn/libmsn.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for libmsn -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Redistribution and use of this script, with or without modification, is @@ -23,8 +23,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PKGNAM=libmsn -VERSION=r96 -ARCH=${ARCH:-x86_64} +VERSION=4.1 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} @@ -32,6 +31,16 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PKGNAM +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -65,8 +77,8 @@ cd build -DCMAKE_INSTALL_PREFIX=/usr \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ .. - make $NUMJOBS || make || exit 1 - make install DESTDIR=$PKG || exit 1 + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 cd .. find $PKG | xargs file | grep -e "executable" -e "shared object" \ diff --git a/source/l/libmsn/slack-desc b/source/l/libmsn/slack-desc index 0875c42ac..8fe1410c5 100644 --- a/source/l/libmsn/slack-desc +++ b/source/l/libmsn/slack-desc @@ -13,7 +13,7 @@ libmsn: connecting to Microsoft's MSN Messenger service. libmsn: libmsn: libmsn: -libmsn: Homepage: http://sourceforge.net/projects/libmsn/ libmsn: libmsn: +libmsn: Homepage: http://sourceforge.net/projects/libmsn/ libmsn: diff --git a/source/l/libmtp/libmtp.SlackBuild b/source/l/libmtp/libmtp.SlackBuild index 748682d55..c00fc5996 100755 --- a/source/l/libmtp/libmtp.SlackBuild +++ b/source/l/libmtp/libmtp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ PKGNAM=libmtp -VERSION=${VERSION:-0.3.6} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,6 +52,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP @@ -80,6 +92,16 @@ sed -e 's/MODE="666"/GROUP="audio", MODE="0660"/' libmtp.rules \ mkdir -p $PKG/usr/share/hal/fdi/information/20thirdparty/ cat libmtp.fdi > $PKG/usr/share/hal/fdi/information/20thirdparty/10-libmtp.fdi +# Guess someone didn't have enough to drink: +( cd $PKG/usr/bin + rm -f mtp-sendtr mtp-sendfile mtp-newfolder mtp-getfile mtp-delfile + ln -s mtp-connect mtp-sendtr + ln -s mtp-connect mtp-sendfile + ln -s mtp-connect mtp-newfolder + ln -s mtp-connect mtp-getfile + ln -s mtp-connect mtp-delfile +) + # Strip binaries: find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/l/libmtp/slack-desc b/source/l/libmtp/slack-desc index 5bc514e20..7e4aba0e6 100644 --- a/source/l/libmtp/slack-desc +++ b/source/l/libmtp/slack-desc @@ -9,7 +9,7 @@ libmtp: libmtp (A library for MTP media devices) libmtp: libmtp: libmtp is a library that attempts to support Microsoft's Media -libmtp: Transfer Protocol (MTP). It was initially based the great libptp2 +libmtp: Transfer Protocol (MTP). It was initially based on the great libptp2 libmtp: library by Mariusz Woloszyn now maintained by Marcus Meissners, and libmtp: Hubert Figuere's libgphoto2 work based on libptp2 (or is libptp2 libmtp: based on libgphoto?). It is like a master DJ has remixed all of diff --git a/source/l/libnotify/libnotify.SlackBuild b/source/l/libnotify/libnotify.SlackBuild new file mode 100755 index 000000000..671a6d85b --- /dev/null +++ b/source/l/libnotify/libnotify.SlackBuild @@ -0,0 +1,92 @@ +#!/bin/sh +# +# Slackware build script for libnotify +# +# Copyright 2009 Erik W. Hanson, Minneapolis, MN, USA +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=libnotify +VERSION=0.4.5 +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -eu + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* +cd $PRGNAM-$VERSION +chown -R root:root . +chmod -R u+w,go+r-w,a-s . + +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --enable-static=no \ + --enable-shared=yes \ + --build=$ARCH-slackware-linux + +make +make install-strip DESTDIR=$PKG + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a AUTHORS ChangeLog COPYING README $PKG/usr/doc/$PRGNAM-$VERSION +( cd $PKG/usr/doc/$PRGNAM-$VERSION ; ln -s ../../share/gtk-doc/html/libnotify html ) +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libnotify/slack-desc b/source/l/libnotify/slack-desc new file mode 100644 index 000000000..4a46ad9a3 --- /dev/null +++ b/source/l/libnotify/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler--------------------------------------------------| +libnotify: libnotify (notification library) +libnotify: +libnotify: A general library for event notification +libnotify: +libnotify: Homepage: http://www.galago-project.org/news/index.php +libnotify: +libnotify: +libnotify: +libnotify: +libnotify: +libnotify: diff --git a/source/l/libogg/libogg.SlackBuild b/source/l/libogg/libogg.SlackBuild index b6fcc4283..01e7b4944 100755 --- a/source/l/libogg/libogg.SlackBuild +++ b/source/l/libogg/libogg.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.3 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo libogg-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +59,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf libogg-$VERSION -tar xvf $CWD/libogg-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libogg-$VERSION.tar.?z* || exit 1 cd libogg-$VERSION chown -R root:root . find . \ diff --git a/source/l/libpng/libpng.SlackBuild b/source/l/libpng/libpng.SlackBuild index adf477bb3..83083c0b0 100755 --- a/source/l/libpng/libpng.SlackBuild +++ b/source/l/libpng/libpng.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.2.37 -ARCH=${ARCH:-x86_64} +VERSION_OLD=1.2.43 +VERSION_NEW=1.4.2 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -37,9 +47,11 @@ PKG=$TMP/package-libpng rm -rf $PKG mkdir -p $TMP $PKG/usr +build_source() { + cd $TMP rm -rf libpng-$VERSION -tar xjvf $CWD/libpng-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libpng-$VERSION.tar.?z* || exit 1 cd libpng-$VERSION chown -R root:root . find . \ @@ -48,36 +60,44 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Might as well link to -lz -lm, since the ./configure seems -# to be doing it that way now... finally. That'll prevent -# a couple of emails a week. :-) -zcat $CWD/libpng.libs.diff.gz | patch -p1 --verbose || exit 1 - -# Need this to substitute macros, but we'll keep using the -# pre-built Makefile for now anyway... +# Look like using ./configure is the only way that works now... ./configure --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man -# Link the custom makefile: -ln -sf scripts/makefile.linux ./Makefile +make -j4 prefix=/usr LIBPATH=/usr/lib${LIBDIRSUFFIX} ZLIBLIB="-L/usr/lib${LIBDIRSUFFIX} -lm -lz" || exit 1 +make install prefix=/usr LIBPATH=/usr/lib${LIBDIRSUFFIX} ZLIBLIB="-L/usr/lib${LIBDIRSUFFIX} -lm -lz" DESTDIR=$PKG -make -j4 prefix=/usr LIBPATH=/usr/lib${LIBDIRSUFFIX} || exit 1 -make install prefix=/usr LIBPATH=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG - -# This symlink is needed to keep old applications running: -# I guess the real lib used the major number 3, then 0 for -# a short while, and now .3 again. Hopefully it will stay -# this way as it was .3 in Slackware 10.2. One can hope. +# I'm ditching this to see if anyone cares. +# +## This symlink is needed to keep old applications running: +## I guess the real lib used the major number 3, then 0 for +## a short while, and now .3 again. Hopefully it will stay +## this way as it was .3 in Slackware 10.2. One can hope. +#( cd $PKG/usr/lib${LIBDIRSUFFIX} +# if [ ! -e libpng.so.0 -a -e libpng.so.3 ]; then +# ln -sf libpng.so.3 libpng.so.0 +# fi +#) + +# Well, glad I got rid of the above, but <someone> upstream still does not +# grok shared libraries on Linux it seems -- libpng-1.4.0 caused all the +# newly compiled binaries to want libpng.so.14, and now libpng-1.4.1 +# wants to change that to libpng14.so.14. Searching online finds that +# we are not the only ones with binaries that want libpng.so.14, so we +# are forced to provide a compatibility symlink again... :-/ +# +# We'll try to remove this in 5 to 10 years, just like before. ( cd $PKG/usr/lib${LIBDIRSUFFIX} - if [ ! -e libpng.so.0 -a -e libpng.so.3 ]; then - ln -sf libpng.so.3 libpng.so.0 + if [ ! -e libpng.so.14 -a -e libpng14.so.14 ]; then + ln -sf libpng14.so.14 libpng.so.14 fi ) find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -gzip -9 $PKG/usr/man/man?/* +gzip -9 --force $PKG/usr/man/man?/*.? mkdir -p $PKG/usr/doc/libpng-$VERSION cp -a \ @@ -85,6 +105,27 @@ cp -a \ libpng*.txt example.c \ $PKG/usr/doc/libpng-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/libpng-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +} + +# Build the 1.2 version: +VERSION=$VERSION_OLD +build_source + +# Build the 1.4 version: +VERSION=$VERSION_NEW +build_source + +# Default the includes to version 1.4.x: +( cd $PKG/usr/include ; ln -sf libpng14 libpng ) + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libpng/libpng.libs.diff b/source/l/libpng/libpng.libs.diff deleted file mode 100644 index 814365f6f..000000000 --- a/source/l/libpng/libpng.libs.diff +++ /dev/null @@ -1,18 +0,0 @@ -diff -ruN libpng-1.2.12/scripts/makefile.linux libpng-1.2.12-ldhack/scripts/makefile.linux
---- libpng-1.2.12/scripts/makefile.linux 2006-06-27 22:22:40.000000000 +0200
-+++ libpng-1.2.12-ldhack/scripts/makefile.linux 2006-08-25 14:27:08.000000000 +0200
-@@ -110,12 +110,12 @@
- $(LN_SF) $(LIBSOVER) $(LIBSOMAJ)
-
- $(LIBSOVER): $(OBJSDLL)
-- $(CC) -shared -Wl,-soname,$(LIBSOMAJ) -o $(LIBSOVER) $(OBJSDLL)
-+ $(CC) -shared -Wl,-soname,$(LIBSOMAJ) -o $(LIBSOVER) $(OBJSDLL) -lm -lz
-
- $(OLDSOVER): $(OBJSDLL)
- $(CC) -shared -Wl,-soname,$(OLDSOMAJ) \
- -o $(OLDSOVER) \
-- $(OBJSDLL)
-+ $(OBJSDLL) -lm -lz
-
- pngtest: pngtest.o $(LIBSO)
- $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS)
diff --git a/source/l/libraw1394/libraw1394-2.0.5.tar.sign b/source/l/libraw1394/libraw1394-2.0.5.tar.sign new file mode 100644 index 000000000..a0d52cf1d --- /dev/null +++ b/source/l/libraw1394/libraw1394-2.0.5.tar.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLSEqvyGugalF9Dw4RAueNAJ9LX2wQyXxyDS0Jqet7Om5arr0+wwCeMJUV +7mZJlZrVGYg2b+bcycVTf2U= +=louL +-----END PGP SIGNATURE----- diff --git a/source/l/libraw1394/libraw1394.SlackBuild b/source/l/libraw1394/libraw1394.SlackBuild index 7b274c814..e7e3feb68 100755 --- a/source/l/libraw1394/libraw1394.SlackBuild +++ b/source/l/libraw1394/libraw1394.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Pierre Cazenave <pwcazenave@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,20 +23,34 @@ # Modified by Robby Workman <rworkman at slackware.com> -VERSION=2.0.0 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:--j7} +PKGNAM=libraw1394 +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:--j7} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" - elif [ "$ARCH" = "i686" ]; then +elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" LIBDIRSUFFIX="" - elif [ "$ARCH" = "x86_64" ]; then +elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -47,7 +61,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf $TMP/libraw1394-$VERSION -tar xvf $CWD/libraw1394-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libraw1394-$VERSION.tar.?z* || exit 1 cd libraw1394-$VERSION || exit 1 chown -R root:root . find . \ @@ -79,10 +93,18 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ mkdir -p $PKG/usr/doc/libraw1394-$VERSION cp -a \ - AUTHORS COPYING* INSTALL NEWS README \ + AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/libraw1394-$VERSION find $PKG/usr/doc/libraw1394-$VERSION -type f -exec chmod 644 {} \; +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libraw1394/libraw1394.info b/source/l/libraw1394/libraw1394.info deleted file mode 100644 index c1657c5b3..000000000 --- a/source/l/libraw1394/libraw1394.info +++ /dev/null @@ -1,5 +0,0 @@ -PRGNAM=libraw1394 -VERSION=1.3.0 -HOMEPAGE=www.linux1394.org/ -DOWNLOAD=http://www.linux1394.org/dl/libraw1394-1.3.0.tar.gz -MD5SUM=c5d9ab62bd25dba96af010b3471e816a diff --git a/source/l/libraw1394/slack-desc b/source/l/libraw1394/slack-desc index 7e93533ff..d8f96d0b4 100644 --- a/source/l/libraw1394/slack-desc +++ b/source/l/libraw1394/slack-desc @@ -11,7 +11,7 @@ libraw1394: libraw1394: libraw1394 provides direct access to the IEEE 1394 bus through libraw1394: the Linux 1394 subsystem's raw1394 user space interface. libraw1394: -libraw1394: Homepage: http://www.linux1394.org/ +libraw1394: Homepage: http://www.kernel.org/pub/linux/libs/ieee1394/ libraw1394: libraw1394: libraw1394: diff --git a/source/l/librsvg/librsvg.SlackBuild b/source/l/librsvg/librsvg.SlackBuild index 556a54cf1..bd22ff821 100755 --- a/source/l/librsvg/librsvg.SlackBuild +++ b/source/l/librsvg/librsvg.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,9 +23,18 @@ # Slackware build script for librsvg -VERSION=2.26.0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo librsvg-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -38,6 +47,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -49,7 +61,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf librsvg-$VERSION -tar xvf $CWD/librsvg-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/librsvg-$VERSION.tar.?z* || exit 1 cd librsvg-$VERSION chown -R root:root . find . \ @@ -89,6 +101,14 @@ cp -a \ $PKG/usr/doc/librsvg-$VERSION ( cd $PKG/usr/doc/librsvg-$VERSION ; ln -s /usr/share/gtk-doc/html/rsvg html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libsamplerate/libsamplerate.SlackBuild b/source/l/libsamplerate/libsamplerate.SlackBuild new file mode 100755 index 000000000..cc4c5d504 --- /dev/null +++ b/source/l/libsamplerate/libsamplerate.SlackBuild @@ -0,0 +1,73 @@ +#!/bin/sh + +# Slackware build script for libsamplerate +# Written by paul wisehart paul@1ud2.com +# Modified by Robby Workman <rworkman@slackbuilds.org> + +PRGNAM=libsamplerate +VERSION=0.1.7 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 +cd $PRGNAM-$VERSION +chown -R root:root . +chmod -R u+w,go+r-w,a-s . + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --disable-static \ + --localstatedir=/var \ + --build=$ARCH-slackware-linux + +make -j4 || exit 1 +make install DESTDIR=$PKG || exit 1 + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a COPYING README doc/* $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libsamplerate/slack-desc b/source/l/libsamplerate/slack-desc new file mode 100644 index 000000000..cf52161d9 --- /dev/null +++ b/source/l/libsamplerate/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libsamplerate: libsamplerate (a Sample Rate Converter for audio) +libsamplerate: +libsamplerate: Secret Rabbit Code (aka libsamplerate) is a Sample Rate Converter for +libsamplerate: audio. One example of where such a thing would be useful is +libsamplerate: converting audio from the CD sample rate of 44.1kHz to the 48kHz +libsamplerate: sample rate used by DAT players. SRC is capable of arbitrary and time +libsamplerate: varying conversions. SRC provides a small set of converters to allow +libsamplerate: quality to be traded off against computation cost. +libsamplerate: +libsamplerate: libsamplerate home: http://www.mega-nerd.com/SRC/ +libsamplerate: diff --git a/source/l/libspectre/libspectre.SlackBuild b/source/l/libspectre/libspectre.SlackBuild index e8dcdca93..5b6b06509 100755 --- a/source/l/libspectre/libspectre.SlackBuild +++ b/source/l/libspectre/libspectre.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,7 @@ PRGNAM=libspectre -VERSION=0.2.2 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-0.2.5} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} @@ -31,6 +30,16 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PRGNAM +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -40,13 +49,16 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 cd $PRGNAM-$VERSION || exit 1 chown -R root:root . find . \ diff --git a/source/l/libtheora/libtheora.SlackBuild b/source/l/libtheora/libtheora.SlackBuild index b7e22b7ba..1f8a1abf5 100755 --- a/source/l/libtheora/libtheora.SlackBuild +++ b/source/l/libtheora/libtheora.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ PKGNAM=libtheora -VERSION=${VERSION:-1.0} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,11 +52,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: diff --git a/source/l/libtiff/libtiff.SlackBuild b/source/l/libtiff/libtiff.SlackBuild index 9eb3e5a4e..d2e2556ee 100755 --- a/source/l/libtiff/libtiff.SlackBuild +++ b/source/l/libtiff/libtiff.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.8.2 -ARCH=${ARCH:-x86_64} -BUILD=3 +VERSION=${VERSION:-$(echo tiff-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=1 + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i386" ]; then SLKCFLAGS="-O2 -march=i386 -mcpu=i686" @@ -36,6 +47,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +60,7 @@ rm -rf $PKG mkdir -p $PKG cd $TMP rm -rf tiff-$VERSION -tar xjvf $CWD/tiff-$VERSION.tar.bz2 +tar xvf $CWD/tiff-$VERSION.tar.?z* || exit 1 cd tiff-$VERSION chown -R root:root . @@ -56,19 +70,18 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -zcat $CWD/tiff-3.8.2.goo-sec.diff.gz | patch -p1 --verbose || exit 1 -zcat $CWD/tiff-3.8.2.tiffsplit.commandline.overflow.diff.gz | patch -p1 --verbose || exit 1 - CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ --program-prefix="" \ --program-suffix="" \ - $ARCH-slackware-linux + --build=$ARCH-slackware-linux -make -j3 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +( cd man ; make install-man DESTDIR=$PKG || exit 1 ) || exit 1 rm -r $PKG/usr/share ( cd $PKG find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -81,6 +94,14 @@ cp -a \ COPYRIGHT README RELEASE-DATE TODO VERSION \ $PKG/usr/doc/libtiff-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mv $PKG/usr/local/man $PKG/usr rmdir $PKG/usr/local diff --git a/source/l/libtiff/tiff-3.8.2.goo-sec.diff b/source/l/libtiff/tiff-3.8.2.goo-sec.diff deleted file mode 100644 index a5f9e6d5a..000000000 --- a/source/l/libtiff/tiff-3.8.2.goo-sec.diff +++ /dev/null @@ -1,661 +0,0 @@ ---- ./libtiff/tif_read.c.orig 2005-12-21 06:33:56.000000000 -0600 -+++ ./libtiff/tif_read.c 2006-08-17 22:02:40.000000000 -0500 -@@ -31,6 +31,8 @@ - #include "tiffiop.h" - #include <stdio.h> - -+#include <limits.h> -+ - int TIFFFillStrip(TIFF*, tstrip_t); - int TIFFFillTile(TIFF*, ttile_t); - static int TIFFStartStrip(TIFF*, tstrip_t); -@@ -272,7 +274,13 @@ - if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) - _TIFFfree(tif->tif_rawdata); - tif->tif_flags &= ~TIFF_MYBUFFER; -- if ( td->td_stripoffset[strip] + bytecount > tif->tif_size) { -+ /* -+ * This sanity check could potentially overflow, causing an OOB read. -+ * verify that offset + bytecount is > offset. -+ * -- taviso@google.com 14 Jun 2006 -+ */ -+ if ( td->td_stripoffset[strip] + bytecount > tif->tif_size || -+ bytecount > (UINT_MAX - td->td_stripoffset[strip])) { - /* - * This error message might seem strange, but it's - * what would happen if a read were done instead. -@@ -470,7 +478,13 @@ - if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) - _TIFFfree(tif->tif_rawdata); - tif->tif_flags &= ~TIFF_MYBUFFER; -- if ( td->td_stripoffset[tile] + bytecount > tif->tif_size) { -+ /* -+ * We must check this calculation doesnt overflow, potentially -+ * causing an OOB read. -+ * -- taviso@google.com 15 Jun 2006 -+ */ -+ if (td->td_stripoffset[tile] + bytecount > tif->tif_size || -+ bytecount > (UINT_MAX - td->td_stripoffset[tile])) { - tif->tif_curtile = NOTILE; - return (0); - } ---- ./libtiff/tif_next.c.orig 2005-12-21 06:33:56.000000000 -0600 -+++ ./libtiff/tif_next.c 2006-08-17 22:02:40.000000000 -0500 -@@ -105,11 +105,16 @@ - * as codes of the form <color><npixels> - * until we've filled the scanline. - */ -+ /* -+ * Ensure the run does not exceed the scanline -+ * bounds, potentially resulting in a security issue. -+ * -- taviso@google.com 14 Jun 2006. -+ */ - op = row; - for (;;) { - grey = (n>>6) & 0x3; - n &= 0x3f; -- while (n-- > 0) -+ while (n-- > 0 && npixels < imagewidth) - SETPIXEL(op, grey); - if (npixels >= (int) imagewidth) - break; ---- ./libtiff/tif_jpeg.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_jpeg.c 2006-08-17 22:02:40.000000000 -0500 -@@ -722,15 +722,31 @@ - segment_width = TIFFhowmany(segment_width, sp->h_sampling); - segment_height = TIFFhowmany(segment_height, sp->v_sampling); - } -- if (sp->cinfo.d.image_width != segment_width || -- sp->cinfo.d.image_height != segment_height) { -+ if (sp->cinfo.d.image_width < segment_width || -+ sp->cinfo.d.image_height < segment_height) { - TIFFWarningExt(tif->tif_clientdata, module, - "Improper JPEG strip/tile size, expected %dx%d, got %dx%d", - segment_width, - segment_height, - sp->cinfo.d.image_width, - sp->cinfo.d.image_height); -+ } -+ -+ if (sp->cinfo.d.image_width > segment_width || -+ sp->cinfo.d.image_height > segment_height) { -+ /* -+ * This case could be dangerous, if the strip or tile size has been -+ * reported as less than the amount of data jpeg will return, some -+ * potential security issues arise. Catch this case and error out. -+ * -- taviso@google.com 14 Jun 2006 -+ */ -+ TIFFErrorExt(tif->tif_clientdata, module, -+ "JPEG strip/tile size exceeds expected dimensions," -+ "expected %dx%d, got %dx%d", segment_width, segment_height, -+ sp->cinfo.d.image_width, sp->cinfo.d.image_height); -+ return (0); - } -+ - if (sp->cinfo.d.num_components != - (td->td_planarconfig == PLANARCONFIG_CONTIG ? - td->td_samplesperpixel : 1)) { -@@ -761,6 +777,22 @@ - sp->cinfo.d.comp_info[0].v_samp_factor, - sp->h_sampling, sp->v_sampling); - -+ /* -+ * There are potential security issues here for decoders that -+ * have already allocated buffers based on the expected sampling -+ * factors. Lets check the sampling factors dont exceed what -+ * we were expecting. -+ * -- taviso@google.com 14 June 2006 -+ */ -+ if (sp->cinfo.d.comp_info[0].h_samp_factor > sp->h_sampling || -+ sp->cinfo.d.comp_info[0].v_samp_factor > sp->v_sampling) { -+ TIFFErrorExt(tif->tif_clientdata, module, -+ "Cannot honour JPEG sampling factors that" -+ " exceed those specified."); -+ return (0); -+ } -+ -+ - /* - * XXX: Files written by the Intergraph software - * has different sampling factors stored in the -@@ -1521,15 +1553,18 @@ - { - JPEGState *sp = JState(tif); - -- assert(sp != 0); -+ /* assert(sp != 0); */ - - tif->tif_tagmethods.vgetfield = sp->vgetparent; - tif->tif_tagmethods.vsetfield = sp->vsetparent; - -- if( sp->cinfo_initialized ) -- TIFFjpeg_destroy(sp); /* release libjpeg resources */ -- if (sp->jpegtables) /* tag value */ -- _TIFFfree(sp->jpegtables); -+ if (sp != NULL) { -+ if( sp->cinfo_initialized ) -+ TIFFjpeg_destroy(sp); /* release libjpeg resources */ -+ if (sp->jpegtables) /* tag value */ -+ _TIFFfree(sp->jpegtables); -+ } -+ - _TIFFfree(tif->tif_data); /* release local state */ - tif->tif_data = NULL; - -@@ -1541,6 +1576,7 @@ - { - JPEGState* sp = JState(tif); - TIFFDirectory* td = &tif->tif_dir; -+ const TIFFFieldInfo* fip; - uint32 v32; - - assert(sp != NULL); -@@ -1606,7 +1642,13 @@ - default: - return (*sp->vsetparent)(tif, tag, ap); - } -- TIFFSetFieldBit(tif, _TIFFFieldWithTag(tif, tag)->field_bit); -+ -+ if ((fip = _TIFFFieldWithTag(tif, tag))) { -+ TIFFSetFieldBit(tif, fip->field_bit); -+ } else { -+ return (0); -+ } -+ - tif->tif_flags |= TIFF_DIRTYDIRECT; - return (1); - } -@@ -1726,7 +1768,11 @@ - { - JPEGState* sp = JState(tif); - -- assert(sp != NULL); -+ /* assert(sp != NULL); */ -+ if (sp == NULL) { -+ TIFFWarningExt(tif->tif_clientdata, "JPEGPrintDir", "Unknown JPEGState"); -+ return; -+ } - - (void) flags; - if (TIFFFieldSet(tif,FIELD_JPEGTABLES)) ---- ./libtiff/tif_dir.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_dir.c 2006-08-17 22:02:40.000000000 -0500 -@@ -122,6 +122,7 @@ - { - static const char module[] = "_TIFFVSetField"; - -+ const TIFFFieldInfo* fip = _TIFFFindFieldInfo(tif, tag, TIFF_ANY); - TIFFDirectory* td = &tif->tif_dir; - int status = 1; - uint32 v32, i, v; -@@ -195,10 +196,12 @@ - break; - case TIFFTAG_ORIENTATION: - v = va_arg(ap, uint32); -+ const TIFFFieldInfo* fip; - if (v < ORIENTATION_TOPLEFT || ORIENTATION_LEFTBOT < v) { -+ fip = _TIFFFieldWithTag(tif, tag); - TIFFWarningExt(tif->tif_clientdata, tif->tif_name, - "Bad value %lu for \"%s\" tag ignored", -- v, _TIFFFieldWithTag(tif, tag)->field_name); -+ v, fip ? fip->field_name : "Unknown"); - } else - td->td_orientation = (uint16) v; - break; -@@ -387,11 +390,15 @@ - * happens, for example, when tiffcp is used to convert between - * compression schemes and codec-specific tags are blindly copied. - */ -+ /* -+ * better not dereference fip if it is NULL. -+ * -- taviso@google.com 15 Jun 2006 -+ */ - if(fip == NULL || fip->field_bit != FIELD_CUSTOM) { - TIFFErrorExt(tif->tif_clientdata, module, - "%s: Invalid %stag \"%s\" (not supported by codec)", - tif->tif_name, isPseudoTag(tag) ? "pseudo-" : "", -- _TIFFFieldWithTag(tif, tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - status = 0; - break; - } -@@ -468,7 +475,7 @@ - if (fip->field_type == TIFF_ASCII) - _TIFFsetString((char **)&tv->value, va_arg(ap, char *)); - else { -- tv->value = _TIFFmalloc(tv_size * tv->count); -+ tv->value = _TIFFCheckMalloc(tif, tv_size, tv->count, "Tag Value"); - if (!tv->value) { - status = 0; - goto end; -@@ -563,7 +570,7 @@ - } - } - if (status) { -- TIFFSetFieldBit(tif, _TIFFFieldWithTag(tif, tag)->field_bit); -+ TIFFSetFieldBit(tif, fip->field_bit); - tif->tif_flags |= TIFF_DIRTYDIRECT; - } - -@@ -572,12 +579,12 @@ - return (status); - badvalue: - TIFFErrorExt(tif->tif_clientdata, module, "%s: Bad value %d for \"%s\"", -- tif->tif_name, v, _TIFFFieldWithTag(tif, tag)->field_name); -+ tif->tif_name, v, fip ? fip->field_name : "Unknown"); - va_end(ap); - return (0); - badvalue32: - TIFFErrorExt(tif->tif_clientdata, module, "%s: Bad value %ld for \"%s\"", -- tif->tif_name, v32, _TIFFFieldWithTag(tif, tag)->field_name); -+ tif->tif_name, v32, fip ? fip->field_name : "Unknown"); - va_end(ap); - return (0); - } -@@ -813,12 +820,16 @@ - * If the client tries to get a tag that is not valid - * for the image's codec then we'll arrive here. - */ -+ /* -+ * dont dereference fip if it's NULL. -+ * -- taviso@google.com 15 Jun 2006 -+ */ - if( fip == NULL || fip->field_bit != FIELD_CUSTOM ) - { - TIFFErrorExt(tif->tif_clientdata, "_TIFFVGetField", - "%s: Invalid %stag \"%s\" (not supported by codec)", - tif->tif_name, isPseudoTag(tag) ? "pseudo-" : "", -- _TIFFFieldWithTag(tif, tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - ret_val = 0; - break; - } ---- ./libtiff/tif_pixarlog.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_pixarlog.c 2006-08-17 22:02:40.000000000 -0500 -@@ -768,7 +768,19 @@ - if (tif->tif_flags & TIFF_SWAB) - TIFFSwabArrayOfShort(up, nsamples); - -- for (i = 0; i < nsamples; i += llen, up += llen) { -+ /* -+ * if llen is not an exact multiple of nsamples, the decode operation -+ * may overflow the output buffer, so truncate it enough to prevent that -+ * but still salvage as much data as possible. -+ * -- taviso@google.com 14th June 2006 -+ */ -+ if (nsamples % llen) -+ TIFFWarningExt(tif->tif_clientdata, module, -+ "%s: stride %lu is not a multiple of sample count, " -+ "%lu, data truncated.", tif->tif_name, llen, nsamples); -+ -+ -+ for (i = 0; i < nsamples - (nsamples % llen); i += llen, up += llen) { - switch (sp->user_datafmt) { - case PIXARLOGDATAFMT_FLOAT: - horizontalAccumulateF(up, llen, sp->stride, ---- ./libtiff/tif_dirread.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_dirread.c 2006-08-17 22:02:40.000000000 -0500 -@@ -29,6 +29,9 @@ - * - * Directory Read Support Routines. - */ -+ -+#include <limits.h> -+ - #include "tiffiop.h" - - #define IGNORE 0 /* tag placeholder used below */ -@@ -81,6 +84,7 @@ - uint16 dircount; - toff_t nextdiroff; - int diroutoforderwarning = 0; -+ int compressionknown = 0; - toff_t* new_dirlist; - - tif->tif_diroff = tif->tif_nextdiroff; -@@ -147,13 +151,20 @@ - } else { - toff_t off = tif->tif_diroff; - -- if (off + sizeof (uint16) > tif->tif_size) { -- TIFFErrorExt(tif->tif_clientdata, module, -- "%s: Can not read TIFF directory count", -- tif->tif_name); -- return (0); -+ /* -+ * Check for integer overflow when validating the dir_off, otherwise -+ * a very high offset may cause an OOB read and crash the client. -+ * -- taviso@google.com, 14 Jun 2006. -+ */ -+ if (off + sizeof (uint16) > tif->tif_size || -+ off > (UINT_MAX - sizeof(uint16))) { -+ TIFFErrorExt(tif->tif_clientdata, module, -+ "%s: Can not read TIFF directory count", -+ tif->tif_name); -+ return (0); - } else -- _TIFFmemcpy(&dircount, tif->tif_base + off, sizeof (uint16)); -+ _TIFFmemcpy(&dircount, tif->tif_base + off, -+ sizeof (uint16)); - off += sizeof (uint16); - if (tif->tif_flags & TIFF_SWAB) - TIFFSwabShort(&dircount); -@@ -254,6 +265,7 @@ - while (fix < tif->tif_nfields && - tif->tif_fieldinfo[fix]->field_tag < dp->tdir_tag) - fix++; -+ - if (fix >= tif->tif_nfields || - tif->tif_fieldinfo[fix]->field_tag != dp->tdir_tag) { - -@@ -264,17 +276,23 @@ - dp->tdir_tag, - dp->tdir_tag, - dp->tdir_type); -- -- TIFFMergeFieldInfo(tif, -- _TIFFCreateAnonFieldInfo(tif, -- dp->tdir_tag, -- (TIFFDataType) dp->tdir_type), -- 1 ); -+ /* -+ * creating anonymous fields prior to knowing the compression -+ * algorithm (ie, when the field info has been merged) could cause -+ * crashes with pathological directories. -+ * -- taviso@google.com 15 Jun 2006 -+ */ -+ if (compressionknown) -+ TIFFMergeFieldInfo(tif, _TIFFCreateAnonFieldInfo(tif, dp->tdir_tag, -+ (TIFFDataType) dp->tdir_type), 1 ); -+ else goto ignore; -+ - fix = 0; - while (fix < tif->tif_nfields && - tif->tif_fieldinfo[fix]->field_tag < dp->tdir_tag) - fix++; - } -+ - /* - * Null out old tags that we ignore. - */ -@@ -326,6 +344,7 @@ - dp->tdir_type, dp->tdir_offset); - if (!TIFFSetField(tif, dp->tdir_tag, (uint16)v)) - goto bad; -+ else compressionknown++; - break; - /* XXX: workaround for broken TIFFs */ - } else if (dp->tdir_type == TIFF_LONG) { -@@ -540,6 +559,7 @@ - * Attempt to deal with a missing StripByteCounts tag. - */ - if (!TIFFFieldSet(tif, FIELD_STRIPBYTECOUNTS)) { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, TIFFTAG_STRIPBYTECOUNTS); - /* - * Some manufacturers violate the spec by not giving - * the size of the strips. In this case, assume there -@@ -556,7 +576,7 @@ - "%s: TIFF directory is missing required " - "\"%s\" field, calculating from imagelength", - tif->tif_name, -- _TIFFFieldWithTag(tif,TIFFTAG_STRIPBYTECOUNTS)->field_name); -+ fip ? fip->field_name : "Unknown"); - if (EstimateStripByteCounts(tif, dir, dircount) < 0) - goto bad; - /* -@@ -580,6 +600,7 @@ - } else if (td->td_nstrips == 1 - && td->td_stripoffset[0] != 0 - && BYTECOUNTLOOKSBAD) { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, TIFFTAG_STRIPBYTECOUNTS); - /* - * XXX: Plexus (and others) sometimes give a value of zero for - * a tag when they don't know what the correct value is! Try -@@ -589,13 +610,14 @@ - TIFFWarningExt(tif->tif_clientdata, module, - "%s: Bogus \"%s\" field, ignoring and calculating from imagelength", - tif->tif_name, -- _TIFFFieldWithTag(tif,TIFFTAG_STRIPBYTECOUNTS)->field_name); -+ fip ? fip->field_name : "Unknown"); - if(EstimateStripByteCounts(tif, dir, dircount) < 0) - goto bad; - } else if (td->td_planarconfig == PLANARCONFIG_CONTIG - && td->td_nstrips > 2 - && td->td_compression == COMPRESSION_NONE - && td->td_stripbytecount[0] != td->td_stripbytecount[1]) { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, TIFFTAG_STRIPBYTECOUNTS); - /* - * XXX: Some vendors fill StripByteCount array with absolutely - * wrong values (it can be equal to StripOffset array, for -@@ -604,7 +626,7 @@ - TIFFWarningExt(tif->tif_clientdata, module, - "%s: Wrong \"%s\" field, ignoring and calculating from imagelength", - tif->tif_name, -- _TIFFFieldWithTag(tif,TIFFTAG_STRIPBYTECOUNTS)->field_name); -+ fip ? fip->field_name : "Unknown"); - if (EstimateStripByteCounts(tif, dir, dircount) < 0) - goto bad; - } -@@ -870,7 +892,13 @@ - - register TIFFDirEntry *dp; - register TIFFDirectory *td = &tif->tif_dir; -- uint16 i; -+ -+ /* i is used to iterate over td->td_nstrips, so must be -+ * at least the same width. -+ * -- taviso@google.com 15 Jun 2006 -+ */ -+ -+ uint32 i; - - if (td->td_stripbytecount) - _TIFFfree(td->td_stripbytecount); -@@ -947,16 +975,18 @@ - static int - CheckDirCount(TIFF* tif, TIFFDirEntry* dir, uint32 count) - { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dir->tdir_tag); -+ - if (count > dir->tdir_count) { - TIFFWarningExt(tif->tif_clientdata, tif->tif_name, - "incorrect count for field \"%s\" (%lu, expecting %lu); tag ignored", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name, -+ fip ? fip->field_name : "Unknown", - dir->tdir_count, count); - return (0); - } else if (count < dir->tdir_count) { - TIFFWarningExt(tif->tif_clientdata, tif->tif_name, - "incorrect count for field \"%s\" (%lu, expecting %lu); tag trimmed", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name, -+ fip ? fip->field_name : "Unknown", - dir->tdir_count, count); - return (1); - } -@@ -970,6 +1000,7 @@ - TIFFFetchData(TIFF* tif, TIFFDirEntry* dir, char* cp) - { - int w = TIFFDataWidth((TIFFDataType) dir->tdir_type); -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - tsize_t cc = dir->tdir_count * w; - - /* Check for overflow. */ -@@ -1013,7 +1044,7 @@ - bad: - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "Error fetching data for field \"%s\"", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - return (tsize_t) 0; - } - -@@ -1039,10 +1070,12 @@ - static int - cvtRational(TIFF* tif, TIFFDirEntry* dir, uint32 num, uint32 denom, float* rv) - { -+ const TIFFFieldInfo* fip; - if (denom == 0) { -+ fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "%s: Rational with zero denominator (num = %lu)", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name, num); -+ fip ? fip->field_name : "Unknown", num); - return (0); - } else { - if (dir->tdir_type == TIFF_RATIONAL) -@@ -1159,6 +1192,20 @@ - static int - TIFFFetchShortPair(TIFF* tif, TIFFDirEntry* dir) - { -+ /* -+ * Prevent overflowing the v stack arrays below by performing a sanity -+ * check on tdir_count, this should never be greater than two. -+ * -- taviso@google.com 14 Jun 2006. -+ */ -+ if (dir->tdir_count > 2) { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dir->tdir_tag); -+ TIFFWarningExt(tif->tif_clientdata, tif->tif_name, -+ "unexpected count for field \"%s\", %lu, expected 2; ignored.", -+ fip ? fip->field_name : "Unknown", -+ dir->tdir_count); -+ return 0; -+ } -+ - switch (dir->tdir_type) { - case TIFF_BYTE: - case TIFF_SBYTE: -@@ -1329,14 +1376,15 @@ - case TIFF_DOUBLE: - return (TIFFFetchDoubleArray(tif, dir, (double*) v)); - default: -+ { const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - /* TIFF_NOTYPE */ - /* TIFF_ASCII */ - /* TIFF_UNDEFINED */ - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "cannot read TIFF_ANY type %d for field \"%s\"", - dir->tdir_type, -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -- return (0); -+ fip ? fip->field_name : "Unknown"); -+ return (0); } - } - return (1); - } -@@ -1351,6 +1399,9 @@ - int ok = 0; - const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dp->tdir_tag); - -+ if (fip == NULL) { -+ return (0); -+ } - if (dp->tdir_count > 1) { /* array of values */ - char* cp = NULL; - -@@ -1493,6 +1544,7 @@ - TIFFFetchPerSampleShorts(TIFF* tif, TIFFDirEntry* dir, uint16* pl) - { - uint16 samples = tif->tif_dir.td_samplesperpixel; -+ const TIFFFieldInfo* fip; - int status = 0; - - if (CheckDirCount(tif, dir, (uint32) samples)) { -@@ -1510,9 +1562,10 @@ - - for (i = 1; i < check_count; i++) - if (v[i] != v[0]) { -+ fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "Cannot handle different per-sample values for field \"%s\"", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - goto bad; - } - *pl = v[0]; -@@ -1534,6 +1587,7 @@ - TIFFFetchPerSampleLongs(TIFF* tif, TIFFDirEntry* dir, uint32* pl) - { - uint16 samples = tif->tif_dir.td_samplesperpixel; -+ const TIFFFieldInfo* fip; - int status = 0; - - if (CheckDirCount(tif, dir, (uint32) samples)) { -@@ -1551,9 +1605,10 @@ - check_count = samples; - for (i = 1; i < check_count; i++) - if (v[i] != v[0]) { -+ fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "Cannot handle different per-sample values for field \"%s\"", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - goto bad; - } - *pl = v[0]; -@@ -1574,6 +1629,7 @@ - TIFFFetchPerSampleAnys(TIFF* tif, TIFFDirEntry* dir, double* pl) - { - uint16 samples = tif->tif_dir.td_samplesperpixel; -+ const TIFFFieldInfo* fip; - int status = 0; - - if (CheckDirCount(tif, dir, (uint32) samples)) { -@@ -1591,9 +1647,10 @@ - - for (i = 1; i < check_count; i++) - if (v[i] != v[0]) { -+ fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "Cannot handle different per-sample values for field \"%s\"", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - goto bad; - } - *pl = v[0]; ---- ./libtiff/tif_dirinfo.c.orig 2006-02-07 07:51:03.000000000 -0600 -+++ ./libtiff/tif_dirinfo.c 2006-08-17 22:02:40.000000000 -0500 -@@ -775,7 +775,8 @@ - TIFFErrorExt(tif->tif_clientdata, "TIFFFieldWithTag", - "Internal error, unknown tag 0x%x", - (unsigned int) tag); -- assert(fip != NULL); -+ /* assert(fip != NULL); */ -+ - /*NOTREACHED*/ - } - return (fip); -@@ -789,7 +790,8 @@ - if (!fip) { - TIFFErrorExt(tif->tif_clientdata, "TIFFFieldWithName", - "Internal error, unknown tag %s", field_name); -- assert(fip != NULL); -+ /* assert(fip != NULL); */ -+ - /*NOTREACHED*/ - } - return (fip); ---- ./libtiff/tif_fax3.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_fax3.c 2006-08-17 22:02:40.000000000 -0500 -@@ -1136,6 +1136,7 @@ - Fax3VSetField(TIFF* tif, ttag_t tag, va_list ap) - { - Fax3BaseState* sp = Fax3State(tif); -+ const TIFFFieldInfo* fip; - - assert(sp != 0); - assert(sp->vsetparent != 0); -@@ -1181,7 +1182,13 @@ - default: - return (*sp->vsetparent)(tif, tag, ap); - } -- TIFFSetFieldBit(tif, _TIFFFieldWithTag(tif, tag)->field_bit); -+ -+ if ((fip = _TIFFFieldWithTag(tif, tag))) { -+ TIFFSetFieldBit(tif, fip->field_bit); -+ } else { -+ return (0); -+ } -+ - tif->tif_flags |= TIFF_DIRTYDIRECT; - return (1); - } diff --git a/source/l/libtiff/tiff-3.8.2.tiffsplit.commandline.overflow.diff b/source/l/libtiff/tiff-3.8.2.tiffsplit.commandline.overflow.diff deleted file mode 100644 index feb693fab..000000000 --- a/source/l/libtiff/tiff-3.8.2.tiffsplit.commandline.overflow.diff +++ /dev/null @@ -1,22 +0,0 @@ ---- ./tools/tiffsplit.c.orig 2005-12-07 03:48:33.000000000 -0600 -+++ ./tools/tiffsplit.c 2006-08-17 22:03:36.000000000 -0500 -@@ -60,14 +60,16 @@ - fprintf(stderr, "usage: tiffsplit input.tif [prefix]\n"); - return (-3); - } -- if (argc > 2) -- strcpy(fname, argv[2]); -+ if (argc > 2) { -+ strncpy(fname, argv[2], 1024); -+ fname[1024] = '\0'; -+ } - in = TIFFOpen(argv[1], "r"); - if (in != NULL) { - do { - char path[1024+1]; - newfilename(); -- strcpy(path, fname); -+ strncpy(path, fname, 1020); - strcat(path, ".tif"); - out = TIFFOpen(path, TIFFIsBigEndian(in)?"wb":"wl"); - if (out == NULL) diff --git a/source/l/libusb/libusb.SlackBuild b/source/l/libusb/libusb.SlackBuild index 90db52ffa..67d0756a7 100755 --- a/source/l/libusb/libusb.SlackBuild +++ b/source/l/libusb/libusb.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.1.12} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-1.0.6} # libusb version +USBCOMPAT=${USBCOMPAT:-0.1.3} # libusb-compat version + +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -38,20 +51,60 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG -mkdir -p $PKG +mkdir -p $TMP $PKG + +# First we'll do the main libusb stuff cd $TMP rm -rf libusb-$VERSION -tar xzvf $CWD/libusb-$VERSION.tar.gz +tar xvf $CWD/libusb-$VERSION.tar.bz2 cd libusb-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; -# We used to apply a Debian patch here, and it's possible -# that other archs need it still, but vanilla upstream is -# working on ia32 just fine. -#zcat $CWD/libusb_0.1.12-2.diff.gz | patch -p1 +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --docdir=/usr/doc/libusb-$VERSION \ + --disable-static \ + --build=$ARCH-slackware-linux +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG +if [ ! -r /usr/lib${LIBDIRSUFFIX}/pkgconfig/libusb-1.0.pc ]; then + # We have to install this to proceed: + make install +fi + +mkdir -p $PKG/usr/doc/libusb-$VERSION +cp -a \ + AUTHORS COPYING INSTALL NEWS PORTING README THANKS TODO \ + $PKG/usr/doc/libusb-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/libusb-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +# Now build the libusb-compat stuff +cd $TMP +rm -rf libusb-compat-$USBCOMPAT +tar xvf $CWD/libusb-compat-$USBCOMPAT.tar.bz2 +cd libusb-compat-$USBCOMPAT chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -62,14 +115,34 @@ find . \ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --docdir=/usr/doc/libusb-$VERSION \ + --disable-static \ + --build=$ARCH-slackware-linux -make -j3 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG +mkdir -p $PKG/usr/doc/libusb-$VERSION/libusb-compat-$USBCOMPAT +cp -a \ + AUTHORS COPYING INSTALL LICENSE NEWS README \ + $PKG/usr/doc/libusb-$VERSION/libusb-compat-$USBCOMPAT + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/libusb-compat-$USBCOMPAT) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +# Now handle the package-wide stuff ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) # Compress and if needed symlink the man pages: @@ -87,15 +160,9 @@ if [ -d $PKG/usr/man ]; then ) fi -mkdir -p $PKG/usr/doc/libusb-$VERSION -cp -a \ - AUTHORS COPYING ChangeLog INSTALL.libusb LICENSE NEWS README \ - doc/html \ - $PKG/usr/doc/libusb-$VERSION - mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -makepkg -l y -c n $TMP/libusb-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/libusb-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libusb/slack-desc b/source/l/libusb/slack-desc index df9a5b252..e1a8b5dfd 100644 --- a/source/l/libusb/slack-desc +++ b/source/l/libusb/slack-desc @@ -10,10 +10,10 @@ libusb: libusb (USB library) libusb: libusb: This is libusb, a library which allows userspace application access libusb: to USB devices. It is used to connect to USB devices like scanners. +libusb: http://libusb.org/wiki/Libusb1.0 libusb: -libusb: -libusb: -libusb: +libusb: This package also contains libusb-compat for the "old" libusb users. +libusb: http://libusb.org/wiki/LibusbCompat0.1 libusb: libusb: libusb: diff --git a/source/l/libvncserver/libvncserver.SlackBuild b/source/l/libvncserver/libvncserver.SlackBuild index b73d8e77c..87712a13f 100755 --- a/source/l/libvncserver/libvncserver.SlackBuild +++ b/source/l/libvncserver/libvncserver.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,8 +25,17 @@ VERSION=0.9.7 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:--j6} @@ -43,13 +52,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf LibVNCServer-$VERSION -tar xvf $CWD/LibVNCServer-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/LibVNCServer-$VERSION.tar.?z* || exit 1 cd LibVNCServer-$VERSION || exit 1 chown -R root:root . find . \ @@ -84,6 +96,14 @@ cp -a \ AUTHORS COPYING* INSTALL NEWS README TODO \ $PKG/usr/doc/libvncserver-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libvorbis/libvorbis.SlackBuild b/source/l/libvorbis/libvorbis.SlackBuild index 9196270a4..0aacb1a66 100755 --- a/source/l/libvorbis/libvorbis.SlackBuild +++ b/source/l/libvorbis/libvorbis.SlackBuild @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.2.0 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo libvorbis-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf libvorbis-$VERSION -tar xvf $CWD/libvorbis-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libvorbis-$VERSION.tar.?z* || exit 1 cd libvorbis-$VERSION chown -R root:root . find . \ @@ -60,6 +72,7 @@ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --disable-static \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 diff --git a/source/l/libwmf/libwmf.SlackBuild b/source/l/libwmf/libwmf.SlackBuild index c9428e23c..77027ac8f 100755 --- a/source/l/libwmf/libwmf.SlackBuild +++ b/source/l/libwmf/libwmf.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,17 @@ VERSION=0.2.8.4 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-4} +BUILD=${BUILD:-5} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,8 +43,12 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -48,8 +60,11 @@ mkdir -p $PKG1 $PKG2 cd $TMP rm -rf libwmf-$VERSION -tar xvf $CWD/libwmf-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libwmf-$VERSION.tar.?z* || exit 1 cd libwmf-$VERSION + +zcat $CWD/libwmf.png14.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -77,6 +92,14 @@ cp -a \ AUTHORS BUILDING COPYING CREDITS NEWS README TODO \ $PKG1/usr/doc/libwmf-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG1/install cat $CWD/slack-desc > $PKG1/install/slack-desc mkdir -p $PKG2/install diff --git a/source/l/libwmf/libwmf.png14.diff b/source/l/libwmf/libwmf.png14.diff new file mode 100644 index 000000000..c55b143c8 --- /dev/null +++ b/source/l/libwmf/libwmf.png14.diff @@ -0,0 +1,11 @@ +--- ./src/extra/gd/gd_png.c.orig 2005-07-27 15:35:06.000000000 -0500 ++++ ./src/extra/gd/gd_png.c 2010-02-14 18:24:19.000000000 -0600 +@@ -136,7 +136,7 @@ + /* first do a quick check that the file really is a PNG image; could + * have used slightly more general png_sig_cmp() function instead */ + gdGetBuf (sig, 8, infile); +- if (!png_check_sig (sig, 8)) ++ if (!(png_sig_cmp(sig, 0, 8) == 0)) + return NULL; /* bad signature */ + + #ifndef PNG_SETJMP_NOT_SUPPORTED diff --git a/source/l/libwnck/libwnck.SlackBuild b/source/l/libwnck/libwnck.SlackBuild index fef9b01c0..982b40527 100755 --- a/source/l/libwnck/libwnck.SlackBuild +++ b/source/l/libwnck/libwnck.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.26.1 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo libwnck-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -74,6 +87,14 @@ cp -a \ AUTHORS COPYING* NEWS README \ $PKG/usr/doc/libwnck-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then ( cd $PKG/usr/man diff --git a/source/l/libxklavier/libxklavier.SlackBuild b/source/l/libxklavier/libxklavier.SlackBuild index 5b7bc76b1..cc38a5d53 100755 --- a/source/l/libxklavier/libxklavier.SlackBuild +++ b/source/l/libxklavier/libxklavier.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007-2008 Heinz Wiesinger <pprkut@liwjatan.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,12 +23,20 @@ # Modified by Robby Workman <rworkman at slackware.com> +VERSION=${VERSION:-$(echo libxklavier-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} -VERSION=3.9 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-libxklavier @@ -42,13 +50,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf libxklavier-$VERSION -tar xvf $CWD/libxklavier-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libxklavier-$VERSION.tar.?z* || exit 1 cd libxklavier-$VERSION || exit 1 chown -R root:root . find . \ @@ -65,6 +76,7 @@ CXXFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --localstatedir=/var \ --disable-static \ + --with-xkb-base=/etc/X11/xkb \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 @@ -75,12 +87,20 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/libxklavier-$VERSION cp -a \ - AUTHORS ChangeLog COPYING* CREDITS INSTALL NEWS README \ + AUTHORS COPYING* CREDITS INSTALL NEWS README \ $PKG/usr/doc/libxklavier-$VERSION ( cd $PKG/usr/doc/libxklavier-$VERSION ln -s /usr/share/gtk-doc/html/libxklavier html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libxml2/libxml2.SlackBuild b/source/l/libxml2/libxml2.SlackBuild index 27c2b80a6..0bfe3f1f8 100755 --- a/source/l/libxml2/libxml2.SlackBuild +++ b/source/l/libxml2/libxml2.SlackBuild @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.7.3 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +VERSION=2.7.6 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} diff --git a/source/l/libxslt/libxslt.SlackBuild b/source/l/libxslt/libxslt.SlackBuild index 0c7e050c8..225c40937 100755 --- a/source/l/libxslt/libxslt.SlackBuild +++ b/source/l/libxslt/libxslt.SlackBuild @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.24 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=1.1.26 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -46,7 +55,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf libxslt-$VERSION -tar xvf $CWD/libxslt-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libxslt-$VERSION.tar.?z* || exit 1 cd libxslt-$VERSION chown -R root:root . find . \ diff --git a/source/l/loudmouth/loudmouth.SlackBuild b/source/l/loudmouth/loudmouth.SlackBuild new file mode 100755 index 000000000..650bd1699 --- /dev/null +++ b/source/l/loudmouth/loudmouth.SlackBuild @@ -0,0 +1,138 @@ +#!/bin/sh +# Copyright 2009 Eric Hameleers, Eindhoven, NL +# All rights reserved. +# +# Permission to use, copy, modify, and distribute this software for +# any purpose with or without fee is hereby granted, provided that +# the above copyright notice and this permission notice appear in all +# copies. +# +# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF +# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. +# ----------------------------------------------------------------------------- + +PKGNAM=loudmouth +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:" -j4 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + SLKLDFLAGS="-L/usr/lib64" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +zcat $CWD/loudmouth.crtpath.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/loudmouth.gnutls.configure.ac.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/loudmouth.async_assertion.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/loudmouth.sasl-md5-digest-uri.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/loudmouth.stanzadrop.diff.gz | patch -p1 --verbose || exit 1 + +# needed after the configure.ac gnutls patch +autoreconf + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +LDFLAGS="$SLKLDFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --with-ssl=gnutls \ + --enable-debug=no \ + --enable-static=no \ + --program-prefix= \ + --program-suffix= \ + --build=$ARCH-slackware-linux \ + --host=$ARCH-slackware-linux + +# this generates a broken libtool, so use the system version: +cp /usr/bin/libtool . + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +# --enable-static is often ignored +rm -f $PKG/usr/lib${LIBDIRSUFFIX}/lib*.a + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS CONTRIBUTORS COPYING* NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +# Add a package description: +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +# Build package: +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/loudmouth/loudmouth.async_assertion.diff b/source/l/loudmouth/loudmouth.async_assertion.diff new file mode 100644 index 000000000..bda1d19b1 --- /dev/null +++ b/source/l/loudmouth/loudmouth.async_assertion.diff @@ -0,0 +1,19 @@ +diff -urp loudmouth-1.4.3.OLD/loudmouth/lm-socket.c loudmouth-1.4.3/loudmouth/lm-socket.c +--- loudmouth-1.4.3.OLD/loudmouth/lm-socket.c 2008-10-29 12:29:16.000000000 -0400 ++++ loudmouth-1.4.3/loudmouth/lm-socket.c 2008-11-28 19:24:04.000000000 -0500 +@@ -1107,6 +1107,7 @@ lm_socket_create (GMainContext *con + _lm_socket_create_phase1 (socket, NULL, 0); + } + ++#ifndef HAVE_ASYNCNS + if (socket->connect_data == NULL) { + /* Open failed synchronously, probably a DNS lookup problem */ + lm_socket_unref(socket); +@@ -1118,6 +1119,7 @@ lm_socket_create (GMainContext *con + + return NULL; + } ++#endif + + + /* If the connection fails synchronously, we don't want to call the diff --git a/source/l/loudmouth/loudmouth.crtpath.diff b/source/l/loudmouth/loudmouth.crtpath.diff new file mode 100644 index 000000000..ada600405 --- /dev/null +++ b/source/l/loudmouth/loudmouth.crtpath.diff @@ -0,0 +1,11 @@ +--- loudmouth-1.4.3/loudmouth/lm-ssl-gnutls.c.orig 2008-10-29 14:45:10.000000000 +0100 ++++ loudmouth-1.4.3/loudmouth/lm-ssl-gnutls.c 2009-11-03 23:49:02.000000000 +0100 +@@ -32,7 +32,7 @@ + + #include <gnutls/x509.h> + +-#define CA_PEM_FILE "/etc/ssl/certs/ca-certificates.crt" ++#define CA_PEM_FILE "/usr/share/curl/ca-bundle.crt" + + struct _LmSSL { + LmSSLBase base; diff --git a/source/l/loudmouth/loudmouth.gnutls.configure.ac.diff b/source/l/loudmouth/loudmouth.gnutls.configure.ac.diff new file mode 100644 index 000000000..6719141f5 --- /dev/null +++ b/source/l/loudmouth/loudmouth.gnutls.configure.ac.diff @@ -0,0 +1,20 @@ +--- ./configure.ac.orig 2008-10-29 15:23:52.000000000 -0500 ++++ ./configure.ac 2010-04-10 15:42:12.000000000 -0500 +@@ -146,10 +146,13 @@ + enable_ssl=no + if test "x$ac_ssl" = "xgnutls"; then + dnl Look for GnuTLS +- AM_PATH_LM_LIBGNUTLS($GNUTLS_REQUIRED, have_libgnutls=yes, have_libgnutls=no) +- if test "x$have_libgnutls" = "xyes"; then +- CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS" +- LIBS="$LIBS $LIBGNUTLS_LIBS" ++ ++ PKG_CHECK_MODULES(GNUTLS, gnutls >= $GNUTLS_REQUIRED, have_gnutls=yes, have_gnutls=no) ++ if test "x$have_gnutls" = "xyes"; then ++ AC_SUBST(ASYNCNS_CFLAGS) ++ AC_SUBST(ASYNCNS_LIBS) ++ CFLAGS="$CFLAGS $GNUTLS_CFLAGS" ++ LIBS="$LIBS $GNUTLS_LIBS" + AC_DEFINE(HAVE_GNUTLS, 1, [whether to use GnuTSL support.]) + enable_ssl=GnuTLS + else diff --git a/source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff b/source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff new file mode 100644 index 000000000..50c796e87 --- /dev/null +++ b/source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff @@ -0,0 +1,22 @@ +diff -urp loudmouth-1.4.3.OLD/loudmouth/lm-connection.c loudmouth-1.4.3/loudmouth/lm-connection.c +--- loudmouth-1.4.3.OLD/loudmouth/lm-connection.c 2008-10-29 16:38:26.000000000 -0400 ++++ loudmouth-1.4.3/loudmouth/lm-connection.c 2009-06-12 19:13:03.183960144 -0400 +@@ -1442,10 +1442,17 @@ lm_connection_authenticate (LmConnection + connection->jid, connection->resource); + + if (connection->use_sasl) { ++ gchar *domain = NULL; ++ ++ if (!connection_get_server_from_jid (connection->jid, &domain)) { ++ domain = g_strdup (connection->server); ++ } ++ + lm_sasl_authenticate (connection->sasl, + username, password, +- connection->server, ++ domain, + connection_sasl_auth_finished); ++ g_free (domain); + + connection->features_cb = + lm_message_handler_new (connection_features_cb, diff --git a/source/l/loudmouth/loudmouth.stanzadrop.diff b/source/l/loudmouth/loudmouth.stanzadrop.diff new file mode 100644 index 000000000..87b86a998 --- /dev/null +++ b/source/l/loudmouth/loudmouth.stanzadrop.diff @@ -0,0 +1,45 @@ +From: Sjoerd Simons <sjoerd.simons@collabora.co.uk> +Date: Tue, 13 Jan 2009 11:28:44 +0000 +Subject: [PATCH] Drop stanzas when failing to convert them to LmMessages + +when a stanza comes in that for some reason can't be parsed into an LmMessage, +just drop them on the floor instead of blocking the parser. I've seen this +issue happen in practise because some (buggy?) client sending an iq with a +prefix e.g. <client:iq xmlns:client="jabber:client" ... /> +--- + loudmouth/lm-parser.c | 15 ++++++--------- + 1 files changed, 6 insertions(+), 9 deletions(-) + +diff --git a/loudmouth/lm-parser.c b/loudmouth/lm-parser.c +index 1938d56..89f6675 100644 +--- a/loudmouth/lm-parser.c ++++ b/loudmouth/lm-parser.c +@@ -151,19 +151,16 @@ parser_end_node_cb (GMarkupParseContext *context, + if (!m) { + g_warning ("Couldn't create message: %s\n", + parser->cur_root->name); +- return; +- } +- +- g_log (LM_LOG_DOMAIN, LM_LOG_LEVEL_PARSER, ++ } else { ++ g_log (LM_LOG_DOMAIN, LM_LOG_LEVEL_PARSER, + "Have a new message\n"); +- if (parser->function) { +- (* parser->function) (parser, m, parser->user_data); ++ if (parser->function) { ++ (* parser->function) (parser, m, parser->user_data); ++ } ++ lm_message_unref (m); + } + +- lm_message_unref (m); + lm_message_node_unref (parser->cur_root); +- +- + parser->cur_node = parser->cur_root = NULL; + } else { + LmMessageNode *tmp_node; +-- +1.5.6.5 + diff --git a/source/l/loudmouth/slack-desc b/source/l/loudmouth/slack-desc new file mode 100644 index 000000000..00f7c03f5 --- /dev/null +++ b/source/l/loudmouth/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +loudmouth: loudmouth (XMPP C programming library) +loudmouth: +loudmouth: Loudmouth is a lightweight and easy-to-use C library for programming +loudmouth: with the Jabber protocol. It is designed to be easy to get started +loudmouth: with, and yet extensible enough to allow you to do anything that the +loudmouth: Jabber protocol allows. +loudmouth: +loudmouth: loudmouth home: http://www.loudmouth-project.org/ +loudmouth: +loudmouth: +loudmouth: diff --git a/source/l/mpfr/mpfr.SlackBuild b/source/l/mpfr/mpfr.SlackBuild index 588962bdb..808cbdacb 100755 --- a/source/l/mpfr/mpfr.SlackBuild +++ b/source/l/mpfr/mpfr.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.3.1 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo mpfr-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -52,11 +64,11 @@ fi cd $TMP rm -rf mpfr-$VERSION -tar xvf $CWD/mpfr-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/mpfr-$VERSION.tar.?z* || exit 1 cd mpfr-$VERSION chown -R root:root . for file in $CWD/patches/* ; do - ( zcat $file 2> /dev/null | patch -p1 --verbose --batch 1> /dev/null 2> /dev/null || exit 1 ) + ( zcat $file 2> /dev/null | patch -p1 --verbose --batch 2> /dev/null || exit 1 ) if [ ! $? = 0 ]; then exit 1 fi @@ -66,6 +78,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --infodir=/usr/info \ + --docdir=/usr/doc/mpfr-$VERSION \ --enable-static=yes \ --enable-shared=yes \ $ARCH-slackware-linux @@ -85,6 +98,7 @@ gzip -9 $PKG/usr/info/* mkdir -p $PKG/usr/doc/mpfr-$VERSION cp -a \ AUTHORS BUGS COPYING COPYING.LIB FAQ.html INSTALL NEWS README TODO VERSION \ + examples \ $PKG/usr/doc/mpfr-$VERSION mkdir -p $PKG/install diff --git a/source/l/mpfr/patches/patch01 b/source/l/mpfr/patches/patch01 new file mode 100644 index 000000000..2721517c4 --- /dev/null +++ b/source/l/mpfr/patches/patch01 @@ -0,0 +1,184 @@ +diff -Naurd mpfr-2.4.2-a/PATCHES mpfr-2.4.2-b/PATCHES +--- mpfr-2.4.2-a/PATCHES 2009-12-07 13:37:12.000000000 +0000 ++++ mpfr-2.4.2-b/PATCHES 2009-12-07 13:37:12.000000000 +0000 +@@ -0,0 +1 @@ ++sin_cos_underflow +diff -Naurd mpfr-2.4.2-a/VERSION mpfr-2.4.2-b/VERSION +--- mpfr-2.4.2-a/VERSION 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/VERSION 2009-12-07 13:37:12.000000000 +0000 +@@ -1 +1 @@ +-2.4.2 ++2.4.2-p1 +diff -Naurd mpfr-2.4.2-a/mpfr.h mpfr-2.4.2-b/mpfr.h +--- mpfr-2.4.2-a/mpfr.h 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr.h 2009-12-07 13:37:12.000000000 +0000 +@@ -27,7 +27,7 @@ + #define MPFR_VERSION_MAJOR 2 + #define MPFR_VERSION_MINOR 4 + #define MPFR_VERSION_PATCHLEVEL 2 +-#define MPFR_VERSION_STRING "2.4.2" ++#define MPFR_VERSION_STRING "2.4.2-p1" + + /* Macros dealing with MPFR VERSION */ + #define MPFR_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) +diff -Naurd mpfr-2.4.2-a/sin_cos.c mpfr-2.4.2-b/sin_cos.c +--- mpfr-2.4.2-a/sin_cos.c 2009-11-30 02:43:09.000000000 +0000 ++++ mpfr-2.4.2-b/sin_cos.c 2009-12-07 13:37:12.000000000 +0000 +@@ -82,17 +82,19 @@ + if (y != x) + /* y and x differ, thus we can safely try to compute y first */ + { +- MPFR_FAST_COMPUTE_IF_SMALL_INPUT (y, x, -2 * expx, 2, 0, rnd_mode, +- { inexy = _inexact; +- goto small_input; }); ++ MPFR_FAST_COMPUTE_IF_SMALL_INPUT ( ++ y, x, -2 * expx, 2, 0, rnd_mode, ++ { inexy = _inexact; ++ goto small_input; }); + if (0) + { + small_input: + /* we can go here only if we can round sin(x) */ +- MPFR_FAST_COMPUTE_IF_SMALL_INPUT (z, __gmpfr_one, -2 * expx, +- 1, 0, rnd_mode, +- { inexz = _inexact; +- goto end; }); ++ MPFR_FAST_COMPUTE_IF_SMALL_INPUT ( ++ z, __gmpfr_one, -2 * expx, 1, 0, rnd_mode, ++ { inexz = _inexact; ++ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags); ++ goto end; }); + } + + /* if we go here, one of the two MPFR_FAST_COMPUTE_IF_SMALL_INPUT +@@ -101,18 +103,19 @@ + else /* y and x are the same variable: try to compute z first, which + necessarily differs */ + { +- MPFR_FAST_COMPUTE_IF_SMALL_INPUT (z, __gmpfr_one, -2 * expx, +- 1, 0, rnd_mode, +- { inexz = _inexact; +- goto small_input2; }); ++ MPFR_FAST_COMPUTE_IF_SMALL_INPUT ( ++ z, __gmpfr_one, -2 * expx, 1, 0, rnd_mode, ++ { inexz = _inexact; ++ goto small_input2; }); + if (0) + { + small_input2: + /* we can go here only if we can round cos(x) */ +- MPFR_FAST_COMPUTE_IF_SMALL_INPUT (y, x, -2 * expx, 2, 0, +- rnd_mode, +- { inexy = _inexact; +- goto end; }); ++ MPFR_FAST_COMPUTE_IF_SMALL_INPUT ( ++ y, x, -2 * expx, 2, 0, rnd_mode, ++ { inexy = _inexact; ++ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags); ++ goto end; }); + } + } + m += 2 * (-expx); +@@ -207,7 +210,6 @@ + mpfr_clear (xr); + + end: +- /* FIXME: update the underflow flag if need be. */ + MPFR_SAVE_EXPO_FREE (expo); + mpfr_check_range (y, inexy, rnd_mode); + mpfr_check_range (z, inexz, rnd_mode); +diff -Naurd mpfr-2.4.2-a/tests/tsin_cos.c mpfr-2.4.2-b/tests/tsin_cos.c +--- mpfr-2.4.2-a/tests/tsin_cos.c 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/tests/tsin_cos.c 2009-12-07 13:37:12.000000000 +0000 +@@ -382,23 +382,56 @@ + consistency (void) + { + mpfr_t x, s1, s2, c1, c2; ++ mp_exp_t emin, emax; + mp_rnd_t rnd; ++ unsigned int flags_sin, flags_cos, flags, flags_before, flags_ref; ++ int inex_sin, inex_cos, inex, inex_ref; + int i; + ++ emin = mpfr_get_emin (); ++ emax = mpfr_get_emax (); ++ + for (i = 0; i <= 10000; i++) + { + mpfr_init2 (x, MPFR_PREC_MIN + (randlimb () % 8)); + mpfr_inits2 (MPFR_PREC_MIN + (randlimb () % 8), s1, s2, c1, c2, + (mpfr_ptr) 0); +- tests_default_random (x, 256, -5, 50); +- rnd = RND_RAND (); +- mpfr_sin (s1, x, rnd); +- mpfr_cos (c1, x, rnd); +- mpfr_sin_cos (s2, c2, x, rnd); +- if (!(mpfr_equal_p (s1, s2) && mpfr_equal_p (c1, c2))) ++ if (i < 8 * GMP_RND_MAX) + { +- printf ("mpfr_sin_cos and mpfr_sin/mpfr_cos disagree on %s,\nx = ", +- mpfr_print_rnd_mode (rnd)); ++ int j = i / GMP_RND_MAX; ++ if (j & 1) ++ mpfr_set_emin (MPFR_EMIN_MIN); ++ mpfr_set_si (x, (j & 2) ? 1 : -1, GMP_RNDN); ++ mpfr_set_exp (x, mpfr_get_emin ()); ++ rnd = (mpfr_rnd_t) (i % GMP_RND_MAX); ++ flags_before = 0; ++ if (j & 4) ++ mpfr_set_emax (-17); ++ } ++ else ++ { ++ tests_default_random (x, 256, -5, 50); ++ rnd = RND_RAND (); ++ flags_before = (randlimb () & 1) ? ++ (unsigned int) (MPFR_FLAGS_ALL ^ MPFR_FLAGS_ERANGE) : ++ (unsigned int) 0; ++ } ++ __gmpfr_flags = flags_before; ++ inex_sin = mpfr_sin (s1, x, rnd); ++ flags_sin = __gmpfr_flags; ++ __gmpfr_flags = flags_before; ++ inex_cos = mpfr_cos (c1, x, rnd); ++ flags_cos = __gmpfr_flags; ++ __gmpfr_flags = flags_before; ++ inex = !!mpfr_sin_cos (s2, c2, x, rnd); ++ flags = __gmpfr_flags; ++ inex_ref = inex_sin || inex_cos; ++ flags_ref = flags_sin | flags_cos; ++ if (!(mpfr_equal_p (s1, s2) && mpfr_equal_p (c1, c2)) || ++ inex != inex_ref || flags != flags_ref) ++ { ++ printf ("mpfr_sin_cos and mpfr_sin/mpfr_cos disagree on %s," ++ " i = %d\nx = ", mpfr_print_rnd_mode (rnd), i); + mpfr_dump (x); + printf ("s1 = "); + mpfr_dump (s1); +@@ -408,9 +441,16 @@ + mpfr_dump (c1); + printf ("c2 = "); + mpfr_dump (c2); ++ printf ("inex_sin = %d, inex_cos = %d, inex = %d (expected %d)\n", ++ inex_sin, inex_cos, inex, inex_ref); ++ printf ("flags_sin = 0x%x, flags_cos = 0x%x, " ++ "flags = 0x%x (expected 0x%x)\n", ++ flags_sin, flags_cos, flags, flags_ref); + exit (1); + } + mpfr_clears (x, s1, s2, c1, c2, (mpfr_ptr) 0); ++ mpfr_set_emin (emin); ++ mpfr_set_emax (emax); + } + } + +diff -Naurd mpfr-2.4.2-a/version.c mpfr-2.4.2-b/version.c +--- mpfr-2.4.2-a/version.c 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/version.c 2009-12-07 13:37:12.000000000 +0000 +@@ -25,5 +25,5 @@ + const char * + mpfr_get_version (void) + { +- return "2.4.2"; ++ return "2.4.2-p1"; + } diff --git a/source/l/mpfr/patches/patch02 b/source/l/mpfr/patches/patch02 new file mode 100644 index 000000000..fa85d8ef3 --- /dev/null +++ b/source/l/mpfr/patches/patch02 @@ -0,0 +1,71 @@ +diff -Naurd mpfr-2.4.2-a/PATCHES mpfr-2.4.2-b/PATCHES +--- mpfr-2.4.2-a/PATCHES 2009-12-18 12:03:30.000000000 +0000 ++++ mpfr-2.4.2-b/PATCHES 2009-12-18 12:05:19.000000000 +0000 +@@ -0,0 +1 @@ ++longlong.h +diff -Naurd mpfr-2.4.2-a/VERSION mpfr-2.4.2-b/VERSION +--- mpfr-2.4.2-a/VERSION 2009-12-07 13:37:12.000000000 +0000 ++++ mpfr-2.4.2-b/VERSION 2009-12-18 12:05:09.000000000 +0000 +@@ -1 +1 @@ +-2.4.2-p1 ++2.4.2-p2 +diff -Naurd mpfr-2.4.2-a/mpfr-longlong.h mpfr-2.4.2-b/mpfr-longlong.h +--- mpfr-2.4.2-a/mpfr-longlong.h 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr-longlong.h 2009-12-18 12:04:29.000000000 +0000 +@@ -1011,7 +1011,15 @@ + #endif /* __m88000__ */ + + #if defined (__mips) && W_TYPE_SIZE == 32 +-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7 ++#if (__GNUC__ >= 5) || (__GNUC__ >= 4 && __GNUC_MINOR__ >= 4) ++#define umul_ppmm(w1, w0, u, v) \ ++ do { \ ++ UDItype _r; \ ++ _r = (UDItype) u * v; \ ++ (w1) = _r >> 32; \ ++ (w0) = (USItype) _r; \ ++ } while (0) ++#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7 + #define umul_ppmm(w1, w0, u, v) \ + __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v)) + #else +@@ -1024,7 +1032,16 @@ + #endif /* __mips */ + + #if (defined (__mips) && __mips >= 3) && W_TYPE_SIZE == 64 +-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7 ++#if (__GNUC__ >= 5) || (__GNUC__ >= 4 && __GNUC_MINOR__ >= 4) ++typedef unsigned int UTItype __attribute__ ((mode (TI))); ++#define umul_ppmm(w1, w0, u, v) \ ++ do { \ ++ UTItype _r; \ ++ _r = (UTItype) u * v; \ ++ (w1) = _r >> 64; \ ++ (w0) = (UDItype) _r; \ ++ } while (0) ++#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7 + #define umul_ppmm(w1, w0, u, v) \ + __asm__ ("dmultu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v)) + #else +diff -Naurd mpfr-2.4.2-a/mpfr.h mpfr-2.4.2-b/mpfr.h +--- mpfr-2.4.2-a/mpfr.h 2009-12-07 13:37:12.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr.h 2009-12-18 12:05:09.000000000 +0000 +@@ -27,7 +27,7 @@ + #define MPFR_VERSION_MAJOR 2 + #define MPFR_VERSION_MINOR 4 + #define MPFR_VERSION_PATCHLEVEL 2 +-#define MPFR_VERSION_STRING "2.4.2-p1" ++#define MPFR_VERSION_STRING "2.4.2-p2" + + /* Macros dealing with MPFR VERSION */ + #define MPFR_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) +diff -Naurd mpfr-2.4.2-a/version.c mpfr-2.4.2-b/version.c +--- mpfr-2.4.2-a/version.c 2009-12-07 13:37:12.000000000 +0000 ++++ mpfr-2.4.2-b/version.c 2009-12-18 12:05:09.000000000 +0000 +@@ -25,5 +25,5 @@ + const char * + mpfr_get_version (void) + { +- return "2.4.2-p1"; ++ return "2.4.2-p2"; + } diff --git a/source/l/mpfr/patches/patch03 b/source/l/mpfr/patches/patch03 new file mode 100644 index 000000000..3ce4952f2 --- /dev/null +++ b/source/l/mpfr/patches/patch03 @@ -0,0 +1,75 @@ +diff -Naurd mpfr-2.4.2-a/PATCHES mpfr-2.4.2-b/PATCHES +--- mpfr-2.4.2-a/PATCHES 2010-01-11 15:27:18.000000000 +0000 ++++ mpfr-2.4.2-b/PATCHES 2010-01-11 15:30:31.000000000 +0000 +@@ -0,0 +1 @@ ++gmp5 +diff -Naurd mpfr-2.4.2-a/VERSION mpfr-2.4.2-b/VERSION +--- mpfr-2.4.2-a/VERSION 2009-12-18 12:05:09.000000000 +0000 ++++ mpfr-2.4.2-b/VERSION 2010-01-11 15:29:40.000000000 +0000 +@@ -1 +1 @@ +-2.4.2-p2 ++2.4.2-p3 +diff -Naurd mpfr-2.4.2-a/configure mpfr-2.4.2-b/configure +--- mpfr-2.4.2-a/configure 2009-11-30 02:44:35.000000000 +0000 ++++ mpfr-2.4.2-b/configure 2010-01-11 15:28:56.000000000 +0000 +@@ -20449,6 +20449,9 @@ + main () + { + ++#ifndef BITS_PER_MP_LIMB ++#define BITS_PER_MP_LIMB GMP_LIMB_BITS ++#endif + return BITS_PER_MP_LIMB == BYTES_PER_MP_LIMB * CHAR_BIT + && sizeof(mp_limb_t) == BYTES_PER_MP_LIMB ? 0 : 1; + +diff -Naurd mpfr-2.4.2-a/configure.in mpfr-2.4.2-b/configure.in +--- mpfr-2.4.2-a/configure.in 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/configure.in 2009-11-30 02:43:08.000000000 +0000 +@@ -424,6 +424,9 @@ + #include "gmp.h" + #include "gmp-impl.h" + ]], [[ ++#ifndef BITS_PER_MP_LIMB ++#define BITS_PER_MP_LIMB GMP_LIMB_BITS ++#endif + return BITS_PER_MP_LIMB == BYTES_PER_MP_LIMB * CHAR_BIT + && sizeof(mp_limb_t) == BYTES_PER_MP_LIMB ? 0 : 1; + ]])], [AC_MSG_RESULT(yes)], [ +diff -Naurd mpfr-2.4.2-a/mpfr-impl.h mpfr-2.4.2-b/mpfr-impl.h +--- mpfr-2.4.2-a/mpfr-impl.h 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr-impl.h 2010-01-11 15:28:01.000000000 +0000 +@@ -65,6 +65,12 @@ + # ifndef __GMP_IMPL_H__ + # include "gmp-impl.h" + # endif ++# ifndef BITS_PER_MP_LIMB ++# define BITS_PER_MP_LIMB GMP_LIMB_BITS ++# endif ++#ifndef mpn_sqr_n ++# define mpn_sqr_n mpn_sqr ++#endif + # ifdef MPFR_NEED_LONGLONG_H + # include "longlong.h" + # endif +diff -Naurd mpfr-2.4.2-a/mpfr.h mpfr-2.4.2-b/mpfr.h +--- mpfr-2.4.2-a/mpfr.h 2009-12-18 12:05:09.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr.h 2010-01-11 15:29:40.000000000 +0000 +@@ -27,7 +27,7 @@ + #define MPFR_VERSION_MAJOR 2 + #define MPFR_VERSION_MINOR 4 + #define MPFR_VERSION_PATCHLEVEL 2 +-#define MPFR_VERSION_STRING "2.4.2-p2" ++#define MPFR_VERSION_STRING "2.4.2-p3" + + /* Macros dealing with MPFR VERSION */ + #define MPFR_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) +diff -Naurd mpfr-2.4.2-a/version.c mpfr-2.4.2-b/version.c +--- mpfr-2.4.2-a/version.c 2009-12-18 12:05:09.000000000 +0000 ++++ mpfr-2.4.2-b/version.c 2010-01-11 15:29:40.000000000 +0000 +@@ -25,5 +25,5 @@ + const char * + mpfr_get_version (void) + { +- return "2.4.2-p2"; ++ return "2.4.2-p3"; + } diff --git a/source/l/neon/neon.SlackBuild b/source/l/neon/neon.SlackBuild index 511a0891b..896d885d1 100755 --- a/source/l/neon/neon.SlackBuild +++ b/source/l/neon/neon.SlackBuild @@ -22,10 +22,19 @@ PKGNAM=neon -VERSION=${VERSION:-0.28.4} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-0.29.0} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then diff --git a/source/l/netpbm/Makefile.config b/source/l/netpbm/config.mk index d9bf909d5..f5ace50f0 100644 --- a/source/l/netpbm/Makefile.config +++ b/source/l/netpbm/config.mk @@ -8,9 +8,9 @@ # This file is meant to contain variable settings that customize the # build for a particular target system configuration. -# The distribution contains the file Makefile.config.in. You edit -# Makefile.config.in in ways relevant to your particular environment -# to create Makefile.config. The "configure" program will do this +# The distribution contains the file config.mk.in. You edit +# config.mk.in in ways relevant to your particular environment +# to create config.mk. The "configure" program will do this # for you in simple cases. # Some of the variables that the including make file must set for this @@ -101,6 +101,7 @@ HAVE_INT64 = Y CC_FOR_BUILD = $(CC) LD_FOR_BUILD = $(LD) CFLAGS_FOR_BUILD = $(CFLAGS) +LDFLAGS_FOR_BUILD = $(LDFLAGS) # MAKE is set automatically by Make to what was used to invoke Make. @@ -157,7 +158,7 @@ LEX = flex # -pedantic isn't a problem because it causes at worst a warning. #CFLAGS = -O3 -ffast-math -pedantic -fno-common \ # -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit \ -# -Wwrite-string -Wmissing-prototypes -Wundef +# -Wwrite-strings -Wmissing-prototypes -Wundef # The merged programs have a main_XXX subroutine instead of main(), # which would cause a warning with -Wmissing-declarations or # -Wmissing-prototypes. @@ -252,6 +253,17 @@ LDSHLIB = -shared -Wl,-soname,$(SONAME) #LDSHLIB = -shared #AIX Visual Age C: #LDSHLIB = -qmkshrobj +#Mac OSX: +# According to experiments done by Peter A Crowley in May 2007, if +# libnetpbm goes in a standard place such as /usr/local/lib, +# programs need not be built with libnetpbm's location included. +# But if it goes elsewhere, the link-editor must include the +# location in the executable. It finds the runtime location by +# looking inside the library. The information in the library +# comes from the install_name option with which the library was +# built. It's an alternative to the -rpath option on other systems. +#LDSHLIB=-dynamiclib +#LDSHLIB=-dynamiclib -install_name $(NETPBMLIB_RUNTIME_PATH)/libnetpbm.$(MAJ).dylib # LDRELOC is the command to combine two .o files (relocateable object files) # into a single .o file that can later be linked into something else. NONE @@ -285,7 +297,7 @@ LDRELOC = NONE # know why -- history seems to be repeating itself. 2005.02.23. CFLAGS_SHLIB = -# Solaris or SunOS with gcc, and NetBSD: +# Gcc: #CFLAGS_SHLIB = -fpic #CFLAGS_SHLIB = -fPIC # Sun compiler: @@ -306,7 +318,7 @@ CFLAGS_SHLIB = SHLIB_CLIB = -lc # SCO: -SHLIB_CLIB = +#SHLIB_CLIB = # On some systems you have to build into an executable the list of # directories where its dynamically linked libraries can be found at @@ -630,7 +642,7 @@ NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/ -####Lines above were copied from Makefile.config.in by 'configure'. +####Lines above were copied from config.mk.in by 'configure'. ####Lines below were added by 'configure' based on the GNU platform. DEFAULT_TARGET = nonmerge NETPBMLIBTYPE=unixshared @@ -641,6 +653,7 @@ CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes LDRELOC = ld --reloc LINKER_CAN_DO_EXPLICIT_LIBRARY=Y LINKERISCOMPILER = Y +CFLAGS_SHLIB += -fPIC TIFFLIB = libtiff.so JPEGLIB = libjpeg.so ZLIB = libz.so diff --git a/source/l/netpbm/netpbm.SlackBuild b/source/l/netpbm/netpbm.SlackBuild index 0b6685c12..fedaffddb 100755 --- a/source/l/netpbm/netpbm.SlackBuild +++ b/source/l/netpbm/netpbm.SlackBuild @@ -22,10 +22,18 @@ PKGNAM=netpbm -VERSION=${VERSION:-10.35.22} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} - +VERSION=${VERSION:-10.49.02} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -36,6 +44,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +57,7 @@ mkdir -p $TMP # Do not create $PKG or 'make package' fails cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -59,10 +70,10 @@ find . \ # Configure: if [ "$ARCH" = "x86_64" ]; then - zcat $CWD/Makefile.config.gz \ - | sed -e '/^CFLAGS/s/^CFLAGS = .*/& -fPIC/' > Makefile.config + zcat $CWD/config.mk.gz \ + | sed -e '/^CFLAGS/s/^CFLAGS = .*/& -fPIC/' > config.mk else - zcat $CWD/Makefile.config.gz > Makefile.config + zcat $CWD/config.mk.gz > config.mk fi # Build and install (does not like parallel build): @@ -109,9 +120,14 @@ fi # Add a documentation directory: ( cd doc cp -a \ - COPYRIGHT.PATENT GPL_LICENSE.txt HISTORY INSTALL Netpbm.programming \ + COPYRIGHT.PATENT GPL_LICENSE.txt INSTALL Netpbm.programming \ README* USERDOC copyright_summary lgpl_v21.txt \ $PKG/usr/doc/${PKGNAM}-$VERSION + if [ -r HISTORY ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat HISTORY | head -n 1000 > $DOCSDIR/HISTORY + touch -r HISTORY $DOCSDIR/HISTORY + fi ) mkdir -p $PKG/install diff --git a/source/l/notify-python/notify-python.SlackBuild b/source/l/notify-python/notify-python.SlackBuild new file mode 100755 index 000000000..97ce72183 --- /dev/null +++ b/source/l/notify-python/notify-python.SlackBuild @@ -0,0 +1,99 @@ +#!/bin/sh + +# Slackware build script for notify-python + +# Copyright 2009 Erik W. Hanson, Minneapolis, MN, USA +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=notify-python +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 +chown -R root:root . +chmod -R u+w,go+r-w,a-s . + +# Fix http://trac.galago-project.org/ticket/121 +rm -f src/pynotify.c + +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --build=$ARCH-slackware-linux + +make || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING INSTALL NEWS README \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/notify-python/slack-desc b/source/l/notify-python/slack-desc new file mode 100644 index 000000000..3d52503b4 --- /dev/null +++ b/source/l/notify-python/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +notify-python: notify-python (Python bindings for libnotify) +notify-python: +notify-python: The notify-python package contains bindings to use libnotify with +notify-python: Python programs. +notify-python: +notify-python: Homepage for notify-python: http://www.galago-project.org/ +notify-python: +notify-python: +notify-python: +notify-python: +notify-python: diff --git a/source/l/pango/pango.SlackBuild b/source/l/pango/pango.SlackBuild index 79234a741..1ebe74383 100755 --- a/source/l/pango/pango.SlackBuild +++ b/source/l/pango/pango.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,13 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=1.22.4 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +VERSION=${VERSION:-$(echo pango-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,18 +44,23 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-pango + rm -rf $PKG mkdir -p $TMP $PKG/usr - cd $TMP rm -rf pango-$VERSION -tar xvf $CWD/pango-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/pango-$VERSION.tar.?z* || exit 1 + cd pango-$VERSION + # Fix for x86_64 (does not hurt the other archs but note that we will start # using /etc/pango/$host instead of /etc/pango/ now): zcat $CWD/pango.etc.host.location.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/l/parted/parted.SlackBuild b/source/l/parted/parted.SlackBuild index e4a9e5926..27e02b557 100755 --- a/source/l/parted/parted.SlackBuild +++ b/source/l/parted/parted.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,16 +22,24 @@ PKGNAM=parted -VERSION=${VERSION:-1.8.8} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-march=i486 -mtune=i686 -fgnu89-inline" @@ -42,14 +50,19 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC -fgnu89-inline" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z || exit 1 cd ${PKGNAM}-$VERSION -zcat $CWD/parted.configure.diff.gz | patch -p0 --verbose --backup --suffix=.orig || exit 1 +zcat $CWD/parted.configure.diff.gz | patch -p1 || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . @@ -76,8 +89,10 @@ make install DESTDIR=$PKG # Strip binaries: ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) # Compress and link manpages, if any: @@ -110,6 +125,14 @@ cp -a \ doc/{API,FAT} doc/USER.jp \ $PKG/usr/doc/parted-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/parted/parted.SlackBuild.static b/source/l/parted/parted.SlackBuild.static index 4c89bbb04..feb3b3611 100755 --- a/source/l/parted/parted.SlackBuild.static +++ b/source/l/parted/parted.SlackBuild.static @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,17 +20,26 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + PKGNAM=parted -VERSION=${VERSION:-1.8.8} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:" -j7 "} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-march=i486 -mtune=i686 -fgnu89-inline" @@ -41,14 +50,19 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC -fgnu89-inline" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z || exit 1 cd ${PKGNAM}-$VERSION -zcat $CWD/parted.configure.diff.gz | patch -p0 --verbose --backup --suffix=.orig || exit 1 +zcat $CWD/parted.configure.diff.gz | patch -p1 || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . @@ -66,17 +80,19 @@ CFLAGS="$SLKCFLAGS" \ --infodir=/usr/info \ --enable-shared=no \ --enable-static=yes \ - --with-readline \ --enable-device-mapper=yes \ + --with-readline \ --build=$ARCH-slackware-linux -CFLAGS="$SLKCFLAGS" make $NUMJOBS || make || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG # Strip binaries: ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) # Compress and link manpages, if any: @@ -109,10 +125,18 @@ cp -a \ doc/{API,FAT} doc/USER.jp \ $PKG/usr/doc/parted-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc # Build the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.tgz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/parted/parted.configure.diff b/source/l/parted/parted.configure.diff index 3d139f077..649a4b3af 100644 --- a/source/l/parted/parted.configure.diff +++ b/source/l/parted/parted.configure.diff @@ -1,11 +1,12 @@ ---- configure.old 2007-03-20 14:46:50.000000000 -0300 -+++ configure 2007-04-22 19:03:04.000000000 -0300 -@@ -12315,7 +12315,7 @@ +diff -Nur parted-2.1.orig/configure parted-2.1/configure +--- parted-2.1.orig/configure 2009-12-20 05:51:57.000000000 -0600 ++++ parted-2.1/configure 2009-12-22 21:51:44.828799616 -0600 +@@ -13217,7 +13217,7 @@ # native cc issues annoying warnings and then ignores it, # which would cause us to incorrectly conclude that it worked. for gl_flags in \ -- '-Wl,--as-needed' \ -+ '-Wl,--no-as-needed' \ - '-Wl,-z,ignore' \ - '-z ignore' +- '-Wl,--as-needed' \ ++ '-Wl,--no-as-needed' \ + '-Wl,-z,ignore' \ + '-z ignore' do diff --git a/source/l/pcre/pcre.SlackBuild b/source/l/pcre/pcre.SlackBuild index dd0723192..0b5893504 100755 --- a/source/l/pcre/pcre.SlackBuild +++ b/source/l/pcre/pcre.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=7.7 -ARCH=${ARCH:-x86_64} +PKGNAM=pcre +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -51,6 +64,7 @@ tar xvf $CWD/pcre-$VERSION.tar.bz2 || exit 1 cd pcre-$VERSION chown -R root:root . + find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ -exec chmod 755 {} \; -o \ @@ -91,17 +105,24 @@ if [ -d $PKG/usr/man ]; then ) fi -mkdir -p $PKG/usr/doc/pcre-$VERSION -cp -a \ - AUTHORS COPYING INSTALL LICENCE NEWS NON-UNIX-USE README \ - $PKG/usr/doc/pcre-$VERSION -cd doc -cp -a Tech.Notes html $PKG/usr/doc/pcre-$VERSION -chown -R root:root $PKG/usr/doc/pcre-$VERSION # Eliminate redundant docs: rm -rf $PKG/usr/share/doc rmdir $PKG/usr/share +mkdir -p $PKG/usr/doc/pcre-$VERSION +cp -a \ + AUTHORS COPYING* INSTALL HACKING LICENCE NEWS NON-UNIX-USE README* \ + $PKG/usr/doc/pcre-$VERSION +( cd doc ; cp -a Tech.Notes html $PKG/usr/doc/pcre-$VERSION ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/phonon/phonon.SlackBuild b/source/l/phonon/phonon.SlackBuild index 9afb84002..74e4518c7 100755 --- a/source/l/phonon/phonon.SlackBuild +++ b/source/l/phonon/phonon.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.3.1 -ARCH=${ARCH:-x86_64} +VERSION=4.4.1 +SRCVER=4.4.1 BUILD=${BUILD:-1} - NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-phonon @@ -41,13 +50,20 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP +rm -r phonon-$SRCVER tar xvf $CWD/phonon-$VERSION.tar.bz2 || exit 1 -cd phonon-$VERSION || exit 1 +cd phonon-$SRCVER || exit 1 + +#zcat $CWD/phonon.gstreamer.qt-4.5.1.diff.gz | patch -p1 || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -55,16 +71,21 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - . +mkdir build +cd build + cmake \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +cd - + +# PyQT won't find the header files otherwise: +sed -i -e 's#{includedir}$#& -I\${includedir}/phonon#' $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/phonon.pc # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then diff --git a/source/l/phonon/phonon.gstreamer.qt-4.5.1.diff b/source/l/phonon/phonon.gstreamer.qt-4.5.1.diff new file mode 100644 index 000000000..d55d2f88d --- /dev/null +++ b/source/l/phonon/phonon.gstreamer.qt-4.5.1.diff @@ -0,0 +1,431 @@ +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/CMakeLists.txt phonon-4.3.1/gstreamer/CMakeLists.txt +--- phonon-4.3.1.orig/gstreamer/CMakeLists.txt 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/CMakeLists.txt 2009-10-19 13:07:39.000000000 -0500 +@@ -1,4 +1,4 @@ +-# Copyright (C) 2009 Nokia Corporation. All rights reserved. ++# Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + # Copyright (C) 2008 Matthias Kretz <kretz@kde.org> + # + # This library is free software: you can redistribute it and/or modify +@@ -19,7 +19,6 @@ + if (BUILD_PHONON_GSTREAMER) + include_directories(${GSTREAMER_INCLUDE_DIR} ${GLIB2_INCLUDE_DIR} + ${LIBXML2_INCLUDE_DIR}) +- add_definitions(-DPHONON_BACKEND_VERSION_4_2) + + set(phonon_gstreamer_SRCS + audiooutput.cpp +@@ -46,17 +45,17 @@ + ) + + find_package(Alsa) +- macro_ensure_version("0.10.22" ${GSTREAMER_VERSION} GSTREAMER_HAS_NONBLOCKING_ALSASINK) +- if(ALSA_FOUND AND NOT GSTREAMER_HAS_NONBLOCKING_ALSASINK) ++ if(ALSA_FOUND) + add_definitions(-DUSE_ALSASINK2) + include_directories(${ALSA_INCLUDES}) + set(phonon_gstreamer_SRCS + ${phonon_gstreamer_SRCS} + alsasink2.c + ) +- endif(ALSA_FOUND AND NOT GSTREAMER_HAS_NONBLOCKING_ALSASINK) ++ endif(ALSA_FOUND) + +- automoc4_add_library(phonon_gstreamer SHARED ${phonon_gstreamer_SRCS}) ++ automoc4(phonon_gstreamer phonon_gstreamer_SRCS) ++ add_library(phonon_gstreamer SHARED ${phonon_gstreamer_SRCS}) + set_target_properties(phonon_gstreamer PROPERTIES PREFIX "") + target_link_libraries(phonon_gstreamer + ${QT_QTOPENGL_LIBRARY} +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/ConfigureChecks.cmake phonon-4.3.1/gstreamer/ConfigureChecks.cmake +--- phonon-4.3.1.orig/gstreamer/ConfigureChecks.cmake 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/ConfigureChecks.cmake 2009-10-19 13:07:39.000000000 -0500 +@@ -1,4 +1,4 @@ +-# Copyright (C) 2009 Nokia Corporation. All rights reserved. ++# Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + # + # This library is free software: you can redistribute it and/or modify + # it under the terms of the GNU Lesser General Public License as published by +@@ -17,7 +17,6 @@ + + macro_optional_find_package(GStreamerPlugins) + macro_log_feature(GSTREAMER_PLUGIN_VIDEO_LIBRARIES "GStreamer video plugin" "The gstreamer video plugin (part of gstreamer-plugins-base 0.10) is required for the multimedia gstreamer backend" "http://gstreamer.freedesktop.org/modules/" FALSE "0.10") +-macro_log_feature(GSTREAMER_PLUGIN_AUDIO_LIBRARIES "GStreamer audio plugin" "The gstreamer audio plugin (part of gstreamer-plugins-base 0.10) is required for the multimedia gstreamer backend" "http://gstreamer.freedesktop.org/modules/" FALSE "0.10") + + macro_optional_find_package(GLIB2) + macro_log_feature(GLIB2_FOUND "GLib2" "GLib 2 is required to compile the gstreamer backend for Phonon" "http://www.gtk.org/download/" FALSE) +@@ -31,8 +30,8 @@ + macro_optional_find_package(OpenGL) + macro_log_feature(OPENGL_FOUND "OpenGL" "OpenGL support is required to compile the gstreamer backend for Phonon" "" FALSE) + +-if (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GSTREAMER_PLUGIN_AUDIO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) ++if (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) + set(BUILD_PHONON_GSTREAMER TRUE) +-else (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GSTREAMER_PLUGIN_AUDIO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) ++else (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) + set(BUILD_PHONON_GSTREAMER FALSE) +-endif (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GSTREAMER_PLUGIN_AUDIO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) ++endif (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/audiooutput.cpp phonon-4.3.1/gstreamer/audiooutput.cpp +--- phonon-4.3.1.orig/gstreamer/audiooutput.cpp 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/audiooutput.cpp 2009-10-19 13:07:39.000000000 -0500 +@@ -42,6 +42,7 @@ + static int count = 0; + m_name = "AudioOutput" + QString::number(count++); + if (m_backend->isValid()) { ++ g_set_application_name(qApp->applicationName().toUtf8()); + m_audioBin = gst_bin_new (NULL); + gst_object_ref (GST_OBJECT (m_audioBin)); + gst_object_sink (GST_OBJECT (m_audioBin)); +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/mediaobject.cpp phonon-4.3.1/gstreamer/mediaobject.cpp +--- phonon-4.3.1.orig/gstreamer/mediaobject.cpp 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/mediaobject.cpp 2009-10-19 13:19:20.000000000 -0500 +@@ -14,7 +14,6 @@ + You should have received a copy of the GNU Lesser General Public License + along with this library. If not, see <http://www.gnu.org/licenses/>. + */ +- + #include <cmath> + #include <gst/interfaces/propertyprobe.h> + #include "common.h" +@@ -24,7 +23,6 @@ + #include "backend.h" + #include "streamreader.h" + #include "phononsrc.h" +- + #include <QtCore> + #include <QtCore/QTimer> + #include <QtCore/QVector> +@@ -78,6 +76,9 @@ + , m_videoGraph(0) + , m_previousTickTime(-1) + , m_resetNeeded(false) ++ , m_autoplayTitles(true) ++ , m_availableTitles(0) ++ , m_currentTitle(1) + { + qRegisterMetaType<GstCaps*>("GstCaps*"); + qRegisterMetaType<State>("State"); +@@ -141,9 +142,9 @@ + if (m_resumeState) + return; + +- if (m_state == Phonon::PlayingState || m_state == Phonon::PausedState) { ++ if (m_pendingState == Phonon::PlayingState || m_pendingState == Phonon::PausedState) { + m_resumeState = true; +- m_oldState = m_state; ++ m_oldState = m_pendingState; + m_oldPos = getPipelinePos(); + } + } +@@ -347,11 +348,8 @@ + * + * returns true if successful + */ +-bool MediaObject::createPipefromURL(const QString &encodedUrl) ++bool MediaObject::createPipefromURL(const QUrl &url) + { +- // Convert back to URL +- QUrl url(encodedUrl, QUrl::StrictMode); +- + // Remove any existing data source + if (m_datasource) { + gst_bin_remove(GST_BIN(m_pipeline), m_datasource); +@@ -361,7 +359,7 @@ + + // Verify that the uri can be parsed + if (!url.isValid()) { +- m_backend->logMessage(QString("%1 is not a valid URI").arg(encodedUrl)); ++ m_backend->logMessage(QString("%1 is not a valid URI").arg(url.toString())); + return false; + } + +@@ -875,8 +873,7 @@ + + switch (source.type()) { + case MediaSource::Url: { +- QString urlString = source.url().toEncoded(); +- if (createPipefromURL(urlString)) ++ if (createPipefromURL(source.url())) + m_loading = true; + else + setError(tr("Could not open media source.")); +@@ -884,8 +881,7 @@ + break; + + case MediaSource::LocalFile: { +- QString urlString = QUrl::fromLocalFile(source.fileName()).toString(); +- if (createPipefromURL(urlString)) ++ if (createPipefromURL(QUrl::fromLocalFile(source.fileName()))) + m_loading = true; + else + setError(tr("Could not open media source.")); +@@ -907,8 +903,13 @@ + break; + + case MediaSource::Disc: // CD tracks can be specified by setting the url in the following way uri=cdda:4 +- m_backend->logMessage("Source type Disc not currently supported", Backend::Warning, this); +- setError(tr("Could not open media source."), Phonon::NormalError); ++ { ++ QUrl cdurl(QLatin1String("cdda://")); ++ if (createPipefromURL(cdurl)) ++ m_loading = true; ++ else ++ setError(tr("Could not open media source.")); ++ } + break; + + default: +@@ -959,6 +960,19 @@ + m_hasVideo = m_videoStreamFound; + emit hasVideoChanged(m_hasVideo); + } ++ ++ m_availableTitles = 1; ++ gint64 titleCount; ++ GstFormat format = gst_format_get_by_nick("track"); ++ if (gst_element_query_duration (m_pipeline, &format, &titleCount)) { ++ int oldAvailableTitles = m_availableTitles; ++ m_availableTitles = (int)titleCount; ++ if (m_availableTitles != oldAvailableTitles) { ++ emit availableTitlesChanged(m_availableTitles); ++ m_backend->logMessage(QString("Available titles changed: %0").arg(m_availableTitles), Backend::Info, this); ++ } ++ } ++ + } + + void MediaObject::setPrefinishMark(qint32 newPrefinishMark) +@@ -1356,6 +1370,13 @@ + if (!m_seekable) + m_atEndOfStream = true; + ++ if (m_autoplayTitles && ++ m_availableTitles > 1 && ++ m_currentTitle < m_availableTitles) { ++ _iface_setCurrentTitle(m_currentTitle + 1); ++ return; ++ } ++ + if (m_nextSource.type() != MediaSource::Invalid + && m_nextSource.type() != MediaSource::Empty) { // We only emit finish when the queue is actually empty + QTimer::singleShot (qMax(0, transitionTime()), this, SLOT(beginPlay())); +@@ -1384,6 +1405,72 @@ + notify(&event); + } + ++#ifndef QT_NO_PHONON_MEDIACONTROLLER ++//interface management ++bool MediaObject::hasInterface(Interface iface) const ++{ ++ return iface == AddonInterface::TitleInterface; ++} ++ ++QVariant MediaObject::interfaceCall(Interface iface, int command, const QList<QVariant> ¶ms) ++{ ++ if (hasInterface(iface)) { ++ ++ switch (iface) ++ { ++ case TitleInterface: ++ switch (command) ++ { ++ case availableTitles: ++ return _iface_availableTitles(); ++ case title: ++ return _iface_currentTitle(); ++ case setTitle: ++ _iface_setCurrentTitle(params.first().toInt()); ++ break; ++ case autoplayTitles: ++ return m_autoplayTitles; ++ case setAutoplayTitles: ++ m_autoplayTitles = params.first().toBool(); ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ } ++ return QVariant(); ++} ++#endif ++ ++int MediaObject::_iface_availableTitles() const ++{ ++ return m_availableTitles; ++} ++ ++int MediaObject::_iface_currentTitle() const ++{ ++ return m_currentTitle; ++} ++ ++void MediaObject::_iface_setCurrentTitle(int title) ++{ ++ GstFormat trackFormat = gst_format_get_by_nick("track"); ++ m_backend->logMessage(QString("setCurrentTitle %0").arg(title), Backend::Info, this); ++ if ((title == m_currentTitle) || (title < 1) || (title > m_availableTitles)) ++ return; ++ ++ m_currentTitle = title; ++ ++ //let's seek to the beginning of the song ++ if (gst_element_seek_simple(m_pipeline, trackFormat, GST_SEEK_FLAG_FLUSH, m_currentTitle - 1)) { ++ updateTotalTime(); ++ m_atEndOfStream = false; ++ emit titleChanged(title); ++ emit totalTimeChanged(totalTime()); ++ } ++} ++ + } // ns Gstreamer + } // ns Phonon + +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/mediaobject.h phonon-4.3.1/gstreamer/mediaobject.h +--- phonon-4.3.1.orig/gstreamer/mediaobject.h 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/mediaobject.h 2009-10-19 13:07:39.000000000 -0500 +@@ -21,7 +21,6 @@ + #include "backend.h" + #include "common.h" + #include "medianode.h" +- + #include <phonon/mediaobjectinterface.h> + #include <phonon/addoninterface.h> + +@@ -32,7 +31,6 @@ + #include <QtCore/QDate> + #include <QtCore/QEvent> + #include <QtCore/QUrl> +- + #include <gst/gst.h> + + QT_BEGIN_NAMESPACE +@@ -50,11 +48,20 @@ + class VideoPath; + class AudioOutput; + +-class MediaObject : public QObject, public MediaObjectInterface, public AddonInterface, public MediaNode ++class MediaObject : public QObject, public MediaObjectInterface ++#ifndef QT_NO_PHONON_MEDIACONTROLLER ++ , public AddonInterface ++#endif ++ , public MediaNode + { + friend class Stream; + Q_OBJECT +- Q_INTERFACES(Phonon::MediaObjectInterface Phonon::AddonInterface Phonon::Gstreamer::MediaNode) ++ Q_INTERFACES(Phonon::MediaObjectInterface ++#ifndef QT_NO_PHONON_MEDIACONTROLLER ++ Phonon::AddonInterface ++#endif ++ Phonon::Gstreamer::MediaNode ++ ) + + public: + +@@ -93,16 +100,10 @@ + MediaSource source() const; + + // No additional interfaces currently supported +- bool hasInterface(Interface) const +- { +- return false; +- } +- +- QVariant interfaceCall(Interface, int, const QList<QVariant> &) +- { +- return QVariant(); +- } +- ++#ifndef QT_NO_PHONON_MEDIACONTROLLER ++ bool hasInterface(Interface) const; ++ QVariant interfaceCall(Interface, int, const QList<QVariant> &); ++#endif + bool isLoading() + { + return m_loading; +@@ -176,6 +177,19 @@ + QMultiMap<QString, QString> metaData(); + void setMetaData(QMultiMap<QString, QString> newData); + ++ // AddonInterface: ++ void titleChanged(int); ++ void availableTitlesChanged(int); ++ ++ // Not implemented ++ void chapterChanged(int); ++ void availableChaptersChanged(int); ++ void angleChanged(int); ++ void availableAnglesChanged(int); ++ ++ void availableSubtitlesChanged(); ++ void availableAudioChannelsChanged(); ++ + protected: + void beginLoad(); + void loadingComplete(); +@@ -185,7 +199,7 @@ + /* + * @param encodedUrl percent-encoded QString for source compat reasons. Should change to QUrl + */ +- bool createPipefromURL(const QString &encodedUrl); ++ bool createPipefromURL(const QUrl &url); + bool createPipefromStream(const MediaSource &); + + private Q_SLOTS: +@@ -219,6 +233,10 @@ + void updateSeekable(); + qint64 getPipelinePos() const; + ++ int _iface_availableTitles() const; ++ int _iface_currentTitle() const; ++ void _iface_setCurrentTitle(int title); ++ + bool m_resumeState; + State m_oldState; + quint64 m_oldPos; +@@ -264,6 +282,9 @@ + bool m_resetNeeded; + QStringList m_missingCodecs; + QMultiMap<QString, QString> m_metaData; ++ bool m_autoplayTitles; ++ int m_availableTitles; ++ int m_currentTitle; + }; + } + } //namespace Phonon::Gstreamer +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/qwidgetvideosink.h phonon-4.3.1/gstreamer/qwidgetvideosink.h +--- phonon-4.3.1.orig/gstreamer/qwidgetvideosink.h 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/qwidgetvideosink.h 2009-10-19 13:07:39.000000000 -0500 +@@ -19,7 +19,6 @@ + #define Phonon_GSTREAMER_VIDEOSINK_H + + #include "common.h" +-#include "qwidgetvideosink.h" + + #include <QtCore/QByteArray> + #include <QtCore/QEvent> +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/videowidget.h phonon-4.3.1/gstreamer/videowidget.h +--- phonon-4.3.1.orig/gstreamer/videowidget.h 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/videowidget.h 2009-10-19 13:07:39.000000000 -0500 +@@ -25,7 +25,6 @@ + #include "common.h" + #include "medianode.h" + #include "abstractrenderer.h" +-#include "videowidget.h" + + #include <gst/gst.h> + +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/x11renderer.cpp phonon-4.3.1/gstreamer/x11renderer.cpp +--- phonon-4.3.1.orig/gstreamer/x11renderer.cpp 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/x11renderer.cpp 2009-10-19 13:07:39.000000000 -0500 +@@ -138,7 +138,6 @@ + void X11Renderer::movieSizeChanged(const QSize &movieSize) + { + Q_UNUSED(movieSize); +- + if (m_renderWidget) { + m_renderWidget->setGeometry(m_videoWidget->calculateDrawFrameRect()); + } diff --git a/source/l/phonon/slack-desc b/source/l/phonon/slack-desc index 9602f73b7..86e93b3e8 100644 --- a/source/l/phonon/slack-desc +++ b/source/l/phonon/slack-desc @@ -8,9 +8,9 @@ |-----handy-ruler------------------------------------------------------| phonon: phonon (multimedia framework for KDE4) phonon: -phonon: Phonon is the multimedia framework for KDE4. -phonon: -phonon: +phonon: Phonon is the multimedia framework for KDE4. This package contains +phonon: the Phonon library, the KDE Phonon xine and gstreamer backends, and +phonon: support files for using Phonon with KDE. phonon: phonon: phonon: diff --git a/source/l/pil/pil.SlackBuild b/source/l/pil/pil.SlackBuild index c9c11c2da..76e3b959b 100755 --- a/source/l/pil/pil.SlackBuild +++ b/source/l/pil/pil.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,22 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.6 -ARCH=${ARCH:-x86_64} + +PKGNAM=pil +ARCNAM=Imaging +VERSION=${VERSION:-$(echo $ARCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "${ARCH}" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -40,15 +52,15 @@ fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-pil +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf Imaging-$VERSION -tar xvf $CWD/Imaging-$VERSION.tar.*z* || exit 1 -cd Imaging-$VERSION +rm -rf $ARCNAM-$VERSION +tar xvf $CWD/$ARCNAM-$VERSION.tar.*z* || exit 1 +cd $ARCNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -67,15 +79,23 @@ python setup.py install --root=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/pil-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - BUILDME CHANGES CONTENTS MANIFEST README \ - $PKG/usr/doc/pil-$VERSION -cp -a Sane/README $PKG/usr/doc/pil-$VERSION/README.Sane + BUILDME CONTENTS MANIFEST README \ + $PKG/usr/doc/$PKGNAM-$VERSION +cp -a Sane/README $PKG/usr/doc/$PKGNAM-$VERSION/README.Sane + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/pil-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/pilot-link/pilot-link.SlackBuild b/source/l/pilot-link/pilot-link.SlackBuild index ca32428cc..c6dac9fa3 100755 --- a/source/l/pilot-link/pilot-link.SlackBuild +++ b/source/l/pilot-link/pilot-link.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,18 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.12.3} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-9} +VERSION=${VERSION:-0.12.5} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -41,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP @@ -48,6 +60,8 @@ rm -rf pilot-link-$VERSION tar xvf $CWD/pilot-link-$VERSION.tar.bz2 || exit 1 cd pilot-link-$VERSION +zcat $CWD/pilot-link.png14.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -102,9 +116,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/pilot-link-$VERSION cp -a \ - AUTHORS COPYING* INSTALL NEWS README \ + AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/pilot-link-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Install man pages: mkdir -p $PKG/usr/man/man{1,7} cp -a doc/man/*.1 $PKG/usr/man/man1 diff --git a/source/l/pilot-link/pilot-link.png14.diff b/source/l/pilot-link/pilot-link.png14.diff new file mode 100644 index 000000000..bc1cba25d --- /dev/null +++ b/source/l/pilot-link/pilot-link.png14.diff @@ -0,0 +1,96 @@ +--- ./src/pilot-read-veo.c.orig 2007-02-04 17:06:03.000000000 -0600 ++++ ./src/pilot-read-veo.c 2010-02-19 12:52:30.000000000 -0600 +@@ -41,10 +41,6 @@ + + #ifdef HAVE_PNG + # include "png.h" +-# if (PNG_LIBPNG_VER < 10201) +-# define png_voidp_NULL (png_voidp)NULL +-# define png_error_ptr_NULL (png_error_ptr)NULL +-# endif + #endif + + #define pi_mktag(c1,c2,c3,c4) (((c1)<<24)|((c2)<<16)|((c3)<<8)|(c4)) +@@ -856,8 +852,8 @@ + png_infop info_ptr; + + png_ptr = png_create_write_struct +- (PNG_LIBPNG_VER_STRING, png_voidp_NULL, +- png_error_ptr_NULL, png_error_ptr_NULL); ++ (PNG_LIBPNG_VER_STRING, NULL, ++ NULL, NULL); + + if (!png_ptr) + return; +--- ./src/pilot-read-notepad.c.orig 2007-02-04 17:06:02.000000000 -0600 ++++ ./src/pilot-read-notepad.c 2010-02-19 12:53:03.000000000 -0600 +@@ -39,10 +39,6 @@ + + #ifdef HAVE_PNG + #include "png.h" +-#if (PNG_LIBPNG_VER < 10201) +- #define png_voidp_NULL (png_voidp)NULL +- #define png_error_ptr_NULL (png_error_ptr)NULL +-#endif + #endif + + const char *progname; +@@ -166,8 +162,8 @@ + width = n->body.width + 8; + + png_ptr = png_create_write_struct +- ( PNG_LIBPNG_VER_STRING, png_voidp_NULL, +- png_error_ptr_NULL, png_error_ptr_NULL); ++ ( PNG_LIBPNG_VER_STRING, NULL, ++ NULL, NULL); + + if(!png_ptr) + return; +--- ./src/pilot-read-screenshot.c.orig 2006-11-02 08:54:31.000000000 -0600 ++++ ./src/pilot-read-screenshot.c 2010-02-19 12:50:44.000000000 -0600 +@@ -40,10 +40,6 @@ + + #ifdef HAVE_PNG + # include "png.h" +-# if (PNG_LIBPNG_VER < 10201) +-# define png_voidp_NULL (png_voidp)NULL +-# define png_error_ptr_NULL (png_error_ptr)NULL +-# endif + #endif + + #define pi_mktag(c1,c2,c3,c4) (((c1)<<24)|((c2)<<16)|((c3)<<8)|(c4)) +@@ -87,8 +83,8 @@ + gray_buf = malloc( state->w ); + + png_ptr = png_create_write_struct +- (PNG_LIBPNG_VER_STRING, png_voidp_NULL, +- png_error_ptr_NULL, png_error_ptr_NULL); ++ (PNG_LIBPNG_VER_STRING, NULL, ++ NULL, NULL); + + if (!png_ptr) + return; +--- ./src/pilot-read-palmpix.c.orig 2007-02-04 17:06:03.000000000 -0600 ++++ ./src/pilot-read-palmpix.c 2010-02-19 12:51:10.000000000 -0600 +@@ -42,10 +42,6 @@ + + #ifdef HAVE_PNG + #include "png.h" +-#if (PNG_LIBPNG_VER < 10201) +- #define png_voidp_NULL (png_voidp)NULL +- #define png_error_ptr_NULL (png_error_ptr)NULL +-#endif + #endif + + const char *progname; +@@ -223,8 +219,8 @@ + png_infop info_ptr; + + png_ptr = png_create_write_struct +- ( PNG_LIBPNG_VER_STRING, png_voidp_NULL, +- png_error_ptr_NULL, png_error_ptr_NULL); ++ ( PNG_LIBPNG_VER_STRING, NULL, ++ NULL, NULL); + + if(!png_ptr) + return; diff --git a/source/l/polkit-gnome/pkga.desktop-NotShowInKDE.diff b/source/l/polkit-gnome/pkga.desktop-NotShowInKDE.diff new file mode 100644 index 000000000..997d1512e --- /dev/null +++ b/source/l/polkit-gnome/pkga.desktop-NotShowInKDE.diff @@ -0,0 +1,9 @@ +diff -Nur polkit-gnome-0.95.orig//src/polkit-gnome-authentication-agent-1.desktop.in.in polkit-gnome-0.95/src/polkit-gnome-authentication-agent-1.desktop.in.in +--- polkit-gnome-0.95.orig//src/polkit-gnome-authentication-agent-1.desktop.in.in 2009-07-20 18:28:31.000000000 -0500 ++++ polkit-gnome-0.95/src/polkit-gnome-authentication-agent-1.desktop.in.in 2010-05-03 01:03:47.021291164 -0500 +@@ -5,4 +5,4 @@ + Terminal=false + Type=Application + Categories= +-OnlyShowIn=GNOME; ++NotShowIn=KDE; diff --git a/source/l/polkit-gnome/polkit-gnome.SlackBuild b/source/l/polkit-gnome/polkit-gnome.SlackBuild new file mode 100755 index 000000000..1790e66b4 --- /dev/null +++ b/source/l/polkit-gnome/polkit-gnome.SlackBuild @@ -0,0 +1,103 @@ +#!/bin/sh + +# Slackware build script for polkit-gnome + +# Copyright 2009, 2010 Robby Workman, Northport, Alabama, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=polkit-gnome +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Let's reverse the logic from OnlyShowIn=GNOME to NotShowIn=KDE so that this +# authentication agent can be used in Xfce (and third-party gnome as needed) +zcat $CWD/pkga.desktop-NotShowInKDE.diff.gz | patch -p1 || exit 1 + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --mandir=/usr/man \ + --enable-gtk-doc \ + --disable-static \ + --disable-introspection \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a AUTHORS COPYING HACKING NEWS README TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/polkit-gnome/slack-desc b/source/l/polkit-gnome/slack-desc new file mode 100644 index 000000000..a9d545bee --- /dev/null +++ b/source/l/polkit-gnome/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +polkit-gnome: polkit-gnome (GTK+ authentication agent for polkit) +polkit-gnome: +polkit-gnome: polkit-gnome provides a GTK+ based authentication agent for polkit. +polkit-gnome: It can be used by any desktop environment that follows the XDG +polkit-gnome: Base Directory Specification. +polkit-gnome: +polkit-gnome: +polkit-gnome: +polkit-gnome: +polkit-gnome: +polkit-gnome: diff --git a/source/l/polkit/polkit-1-shadow.diff b/source/l/polkit/polkit-1-shadow.diff new file mode 100644 index 000000000..56e24277d --- /dev/null +++ b/source/l/polkit/polkit-1-shadow.diff @@ -0,0 +1,1030 @@ +diff --git a/src/polkitagent/Makefile.am b/src/polkitagent/Makefile.am +index 3f38329..e114d01 100644 +--- a/src/polkitagent/Makefile.am ++++ b/src/polkitagent/Makefile.am +@@ -68,8 +68,15 @@ libpolkit_agent_1_la_LDFLAGS = -export-symbols-regex '(^polkit_.*)' + libexec_PROGRAMS = polkit-agent-helper-1 + + polkit_agent_helper_1_SOURCES = \ +- polkitagenthelper.c \ +- $(NULL) ++ polkitagenthelperprivate.c polkitagenthelperprivate.h ++ ++if POLKIT_AUTHFW_PAM ++polkit_agent_helper_1_SOURCES += polkitagenthelper-pam.c ++endif ++if POLKIT_AUTHFW_SHADOW ++polkit_agent_helper_1_SOURCES += polkitagenthelper-shadow.c ++endif ++polkit_agent_helper_1_SOURCES += $(NULL) + + polkit_agent_helper_1_CFLAGS = \ + -D_POLKIT_COMPILATION \ +diff --git a/src/polkitagent/polkitagenthelper-pam.c b/src/polkitagent/polkitagenthelper-pam.c +new file mode 100644 +index 0000000..4c6c6fb +--- /dev/null ++++ b/src/polkitagent/polkitagenthelper-pam.c +@@ -0,0 +1,264 @@ ++/* ++ * Copyright (C) 2008, 2010 Red Hat, Inc. ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General ++ * Public License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 59 Temple Place, Suite 330, ++ * Boston, MA 02111-1307, USA. ++ * ++ * Author: David Zeuthen <davidz@redhat.com> ++ */ ++ ++#include "config.h" ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#include <unistd.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <syslog.h> ++#include <security/pam_appl.h> ++ ++#include <polkit/polkit.h> ++#include "polkitagenthelperprivate.h" ++ ++static int conversation_function (int n, const struct pam_message **msg, struct pam_response **resp, void *data); ++ ++int ++main (int argc, char *argv[]) ++{ ++ int rc; ++ const char *user_to_auth; ++ const char *cookie; ++ struct pam_conv pam_conversation; ++ pam_handle_t *pam_h; ++ const void *authed_user; ++ ++ rc = 0; ++ pam_h = NULL; ++ ++ /* clear the entire environment to avoid attacks using with libraries honoring environment variables */ ++ if (clearenv () != 0) ++ goto error; ++ ++ /* set a minimal environment */ ++ setenv ("PATH", "/usr/sbin:/usr/bin:/sbin:/bin", 1); ++ ++ /* check that we are setuid root */ ++ if (geteuid () != 0) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: needs to be setuid root\n"); ++ goto error; ++ } ++ ++ openlog ("polkit-agent-helper-1", LOG_CONS | LOG_PID, LOG_AUTHPRIV); ++ ++ /* check for correct invocation */ ++ if (argc != 3) ++ { ++ syslog (LOG_NOTICE, "inappropriate use of helper, wrong number of arguments [uid=%d]", getuid ()); ++ fprintf (stderr, "polkit-agent-helper-1: wrong number of arguments. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ user_to_auth = argv[1]; ++ cookie = argv[2]; ++ ++ if (getuid () != 0) ++ { ++ /* check we're running with a non-tty stdin */ ++ if (isatty (STDIN_FILENO) != 0) ++ { ++ syslog (LOG_NOTICE, "inappropriate use of helper, stdin is a tty [uid=%d]", getuid ()); ++ fprintf (stderr, "polkit-agent-helper-1: inappropriate use of helper, stdin is a tty. This incident has been logged.\n"); ++ goto error; ++ } ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: user to auth is '%s'.\n", user_to_auth); ++#endif /* PAH_DEBUG */ ++ ++ pam_conversation.conv = conversation_function; ++ pam_conversation.appdata_ptr = NULL; ++ ++ /* start the pam stack */ ++ rc = pam_start ("polkit-1", ++ user_to_auth, ++ &pam_conversation, ++ &pam_h); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_start failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ /* set the requesting user */ ++ rc = pam_set_item (pam_h, PAM_RUSER, user_to_auth); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_set_item failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ /* is user really user? */ ++ rc = pam_authenticate (pam_h, 0); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_authenticated failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ /* permitted access? */ ++ rc = pam_acct_mgmt (pam_h, 0); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_acct_mgmt failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ /* did we auth the right user? */ ++ rc = pam_get_item (pam_h, PAM_USER, &authed_user); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_get_item failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ if (strcmp (authed_user, user_to_auth) != 0) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: Tried to auth user '%s' but we got auth for user '%s' instead", ++ user_to_auth, (const char *) authed_user); ++ goto error; ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: successfully authenticated user '%s'.\n", user_to_auth); ++#endif /* PAH_DEBUG */ ++ ++ pam_end (pam_h, rc); ++ pam_h = NULL; ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: sending D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ ++ /* now send a D-Bus message to the PolicyKit daemon that ++ * includes a) the cookie; and b) the user we authenticated ++ */ ++ if (!send_dbus_message (cookie, user_to_auth)) ++ { ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: error sending D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ goto error; ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: successfully sent D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ ++ fprintf (stdout, "SUCCESS\n"); ++ flush_and_wait(); ++ return 0; ++ ++error: ++ if (pam_h != NULL) ++ pam_end (pam_h, rc); ++ ++ fprintf (stdout, "FAILURE\n"); ++ flush_and_wait(); ++ return 1; ++} ++ ++static int ++conversation_function (int n, const struct pam_message **msg, struct pam_response **resp, void *data) ++{ ++ struct pam_response *aresp; ++ char buf[PAM_MAX_RESP_SIZE]; ++ int i; ++ ++ data = data; ++ if (n <= 0 || n > PAM_MAX_NUM_MSG) ++ return PAM_CONV_ERR; ++ ++ if ((aresp = calloc(n, sizeof *aresp)) == NULL) ++ return PAM_BUF_ERR; ++ ++ for (i = 0; i < n; ++i) ++ { ++ aresp[i].resp_retcode = 0; ++ aresp[i].resp = NULL; ++ switch (msg[i]->msg_style) ++ { ++ ++ case PAM_PROMPT_ECHO_OFF: ++ fprintf (stdout, "PAM_PROMPT_ECHO_OFF "); ++ goto conv1; ++ ++ case PAM_PROMPT_ECHO_ON: ++ fprintf (stdout, "PAM_PROMPT_ECHO_ON "); ++ conv1: ++ fputs (msg[i]->msg, stdout); ++ if (strlen (msg[i]->msg) > 0 && msg[i]->msg[strlen (msg[i]->msg) - 1] != '\n') ++ fputc ('\n', stdout); ++ fflush (stdout); ++ ++ if (fgets (buf, sizeof buf, stdin) == NULL) ++ goto error; ++ ++ if (strlen (buf) > 0 && ++ buf[strlen (buf) - 1] == '\n') ++ buf[strlen (buf) - 1] = '\0'; ++ ++ aresp[i].resp = strdup (buf); ++ if (aresp[i].resp == NULL) ++ goto error; ++ break; ++ ++ case PAM_ERROR_MSG: ++ fprintf (stdout, "PAM_ERROR_MSG "); ++ goto conv2; ++ ++ case PAM_TEXT_INFO: ++ fprintf (stdout, "PAM_TEXT_INFO "); ++ conv2: ++ fputs (msg[i]->msg, stdout); ++ if (strlen (msg[i]->msg) > 0 && ++ msg[i]->msg[strlen (msg[i]->msg) - 1] != '\n') ++ fputc ('\n', stdout); ++ fflush (stdout); ++ break; ++ ++ default: ++ goto error; ++ } ++ } ++ ++ *resp = aresp; ++ return PAM_SUCCESS; ++ ++error: ++ ++ for (i = 0; i < n; ++i) ++ { ++ if (aresp[i].resp != NULL) { ++ memset (aresp[i].resp, 0, strlen(aresp[i].resp)); ++ free (aresp[i].resp); ++ } ++ } ++ memset (aresp, 0, n * sizeof *aresp); ++ *resp = NULL; ++ return PAM_CONV_ERR; ++} ++ +diff --git a/src/polkitagent/polkitagenthelper-shadow.c b/src/polkitagent/polkitagenthelper-shadow.c +new file mode 100644 +index 0000000..7435533 +--- /dev/null ++++ b/src/polkitagent/polkitagenthelper-shadow.c +@@ -0,0 +1,189 @@ ++/* ++ * Copyright (C) 2008 Red Hat, Inc. ++ * Copyright (C) 2009-2010 Andrew Psaltis <ampsaltis@gmail.com> ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General ++ * Public License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 59 Temple Place, Suite 330, ++ * Boston, MA 02111-1307, USA. ++ * ++ * Authors: Andrew Psaltis <ampsaltis@gmail.com>, based on ++ * polkitagenthelper.c which was written by ++ * David Zeuthen <davidz@redhat.com> ++ */ ++ ++#include "config.h" ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#include <unistd.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <syslog.h> ++#include <shadow.h> ++#include <grp.h> ++#include <pwd.h> ++#include <time.h> ++ ++#include <polkit/polkit.h> ++#include "polkitagenthelperprivate.h" ++ ++ ++extern char *crypt (); ++static int shadow_authenticate (struct spwd *shadow); ++ ++int ++main (int argc, char *argv[]) ++{ ++ struct spwd *shadow; ++ const char *user_to_auth; ++ const char *cookie; ++ time_t tm; ++ ++ /* clear the entire environment to avoid attacks with ++ libraries honoring environment variables */ ++ if (clearenv () != 0) ++ goto error; ++ ++ /* set a minimal environment */ ++ setenv ("PATH", "/usr/sbin:/usr/bin:/sbin:/bin", 1); ++ ++ /* check that we are setuid root */ ++ if (geteuid () != 0) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: needs to be setuid root\n"); ++ goto error; ++ } ++ ++ openlog ("polkit-agent-helper-1", LOG_CONS | LOG_PID, LOG_AUTHPRIV); ++ ++ /* check for correct invocation */ ++ if (argc != 3) ++ { ++ syslog (LOG_NOTICE, "inappropriate use of helper, wrong number of arguments [uid=%d]", getuid ()); ++ fprintf (stderr, "polkit-agent-helper-1: wrong number of arguments. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ if (getuid () != 0) ++ { ++ /* check we're running with a non-tty stdin */ ++ if (isatty (STDIN_FILENO) != 0) ++ { ++ syslog (LOG_NOTICE, "inappropriate use of helper, stdin is a tty [uid=%d]", getuid ()); ++ fprintf (stderr, "polkit-agent-helper-1: inappropriate use of helper, stdin is a tty. This incident has been logged.\n"); ++ goto error; ++ } ++ } ++ ++ user_to_auth = argv[1]; ++ cookie = argv[2]; ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: user to auth is '%s'.\n", user_to_auth); ++#endif /* PAH_DEBUG */ ++ ++ /* Ask shadow about the user requesting authentication */ ++ if ((shadow = getspnam (user_to_auth)) == NULL) ++ { ++ syslog (LOG_NOTICE, "shadow file data information request for user %s [uid=%d] failed", user_to_auth, getuid()); ++ fprintf(stderr, "polkit-agent-helper-1: could not get shadow information for%.100s", user_to_auth); ++ goto error; ++ } ++ ++ /* Check the user's identity */ ++ if(!shadow_authenticate (shadow)) ++ { ++ syslog (LOG_NOTICE, "authentication failure [uid=%d] trying to authenticate '%s'", getuid (), user_to_auth); ++ fprintf (stderr, "polkit-agent-helper-1: authentication failure. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ /* Check whether the user's password has expired */ ++ time(&tm); ++ if( shadow->sp_max >= 0 && (shadow->sp_lstchg + shadow->sp_max) * 60 * 60 * 24 <= tm) ++ { ++ syslog (LOG_NOTICE, "password expired for user '%s' [uid=%d] trying to authenticate", user_to_auth, getuid () ); ++ fprintf (stderr, "polkit-agent-helper-1: authorization failure. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ /* Check whether the user's password has aged (and account expired along ++ * with it) ++ */ ++ if( shadow->sp_inact >= 0 && (shadow->sp_lstchg + shadow->sp_max + shadow->sp_inact) * 60 * 60 * 24 <= tm) ++ { ++ syslog (LOG_NOTICE, "password aged for user '%s' [uid=%d] trying to authenticate", user_to_auth, getuid () ); ++ fprintf (stderr, "polkit-agent-helper-1: authorization failure. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ /* Check whether the user's account has expired */ ++ if(shadow->sp_expire >= 0 && shadow->sp_expire * 60 * 60 * 24 <= tm) ++ { ++ syslog (LOG_NOTICE, "account expired for user '%s' [uid=%d] trying to authenticate", user_to_auth, getuid () ); ++ fprintf (stderr, "polkit-agent-helper-1: authorization failure. This incident has been logged.\n"); ++ goto error; ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: sending D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ ++ /* now send a D-Bus message to the PolicyKit daemon that ++ * includes a) the cookie; and b) the user we authenticated ++ */ ++ if (!send_dbus_message (cookie, user_to_auth)) ++ { ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: error sending D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ goto error; ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: successfully sent D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ ++ fprintf (stdout, "SUCCESS\n"); ++ flush_and_wait(); ++ return 0; ++ ++error: ++ fprintf (stdout, "FAILURE\n"); ++ flush_and_wait(); ++ return 1; ++} ++ ++static int ++shadow_authenticate(struct spwd *shadow) ++{ ++ /* Speak PAM to the daemon, thanks to David Zeuthen for the idea. */ ++ char passwd[512]; ++ fprintf(stdout, "PAM_PROMPT_ECHO_OFF password:\n"); ++ fflush(stdout); ++ usleep (10 * 1000); /* since fflush(3) seems buggy */ ++ ++ if (fgets (passwd, sizeof (passwd), stdin) == NULL) ++ goto error; ++ ++ if (strlen (passwd) > 0 && passwd[strlen (passwd) - 1] == '\n') ++ passwd[strlen (passwd) - 1] = '\0'; ++ ++ if (strcmp (shadow->sp_pwdp, crypt (passwd, shadow->sp_pwdp)) != 0) ++ goto error; ++ return 1; ++error: ++ return 0; ++} ++ +diff --git a/src/polkitagent/polkitagenthelper.c b/src/polkitagent/polkitagenthelper.c +deleted file mode 100644 +index cca86db..0000000 +--- a/src/polkitagent/polkitagenthelper.c ++++ /dev/null +@@ -1,339 +0,0 @@ +-/* +- * Copyright (C) 2008 Red Hat, Inc. +- * +- * This library is free software; you can redistribute it and/or +- * modify it under the terms of the GNU Lesser General Public +- * License as published by the Free Software Foundation; either +- * version 2 of the License, or (at your option) any later version. +- * +- * This library is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- * Lesser General Public License for more details. +- * +- * You should have received a copy of the GNU Lesser General +- * Public License along with this library; if not, write to the +- * Free Software Foundation, Inc., 59 Temple Place, Suite 330, +- * Boston, MA 02111-1307, USA. +- * +- * Author: David Zeuthen <davidz@redhat.com> +- */ +- +-#include "config.h" +-#include <stdio.h> +-#include <stdlib.h> +-#include <string.h> +-#include <unistd.h> +-#include <sys/types.h> +-#include <sys/stat.h> +-#include <syslog.h> +-#include <security/pam_appl.h> +- +-#include <polkit/polkit.h> +- +-#ifdef HAVE_SOLARIS +-# define LOG_AUTHPRIV (10<<3) +-#endif +- +-#ifndef HAVE_CLEARENV +-extern char **environ; +- +-static int +-clearenv (void) +-{ +- if (environ != NULL) +- environ[0] = NULL; +- return 0; +-} +-#endif +- +-/* Development aid: define PAH_DEBUG to get debugging output. Do _NOT_ +- * enable this in production builds; it may leak passwords and other +- * sensitive information. +- */ +-#undef PAH_DEBUG +-// #define PAH_DEBUG +- +-static gboolean send_dbus_message (const char *cookie, const char *user); +- +-static int conversation_function (int n, const struct pam_message **msg, struct pam_response **resp, void *data); +- +-int +-main (int argc, char *argv[]) +-{ +- int rc; +- const char *user_to_auth; +- const char *cookie; +- struct pam_conv pam_conversation; +- pam_handle_t *pam_h; +- const void *authed_user; +- +- rc = 0; +- pam_h = NULL; +- +- /* clear the entire environment to avoid attacks using with libraries honoring environment variables */ +- if (clearenv () != 0) +- goto error; +- +- /* set a minimal environment */ +- setenv ("PATH", "/usr/sbin:/usr/bin:/sbin:/bin", 1); +- +- /* check that we are setuid root */ +- if (geteuid () != 0) +- { +- fprintf (stderr, "polkit-agent-helper-1: needs to be setuid root\n"); +- goto error; +- } +- +- openlog ("polkit-agent-helper-1", LOG_CONS | LOG_PID, LOG_AUTHPRIV); +- +- /* check for correct invocation */ +- if (argc != 3) +- { +- syslog (LOG_NOTICE, "inappropriate use of helper, wrong number of arguments [uid=%d]", getuid ()); +- fprintf (stderr, "polkit-agent-helper-1: wrong number of arguments. This incident has been logged.\n"); +- goto error; +- } +- +- user_to_auth = argv[1]; +- cookie = argv[2]; +- +- if (getuid () != 0) +- { +- /* check we're running with a non-tty stdin */ +- if (isatty (STDIN_FILENO) != 0) +- { +- syslog (LOG_NOTICE, "inappropriate use of helper, stdin is a tty [uid=%d]", getuid ()); +- fprintf (stderr, "polkit-agent-helper-1: inappropriate use of helper, stdin is a tty. This incident has been logged.\n"); +- goto error; +- } +- } +- +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: user to auth is '%s'.\n", user_to_auth); +-#endif /* PAH_DEBUG */ +- +- pam_conversation.conv = conversation_function; +- pam_conversation.appdata_ptr = NULL; +- +- /* start the pam stack */ +- rc = pam_start ("polkit-1", +- user_to_auth, +- &pam_conversation, +- &pam_h); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_start failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- /* set the requesting user */ +- rc = pam_set_item (pam_h, PAM_RUSER, user_to_auth); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_set_item failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- /* is user really user? */ +- rc = pam_authenticate (pam_h, 0); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_authenticated failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- /* permitted access? */ +- rc = pam_acct_mgmt (pam_h, 0); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_acct_mgmt failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- /* did we auth the right user? */ +- rc = pam_get_item (pam_h, PAM_USER, &authed_user); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_get_item failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- if (strcmp (authed_user, user_to_auth) != 0) +- { +- fprintf (stderr, "polkit-agent-helper-1: Tried to auth user '%s' but we got auth for user '%s' instead", +- user_to_auth, (const char *) authed_user); +- goto error; +- } +- +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: successfully authenticated user '%s'.\n", user_to_auth); +-#endif /* PAH_DEBUG */ +- +- pam_end (pam_h, rc); +- pam_h = NULL; +- +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: sending D-Bus message to PolicyKit daemon\n"); +-#endif /* PAH_DEBUG */ +- +- /* now send a D-Bus message to the PolicyKit daemon that +- * includes a) the cookie; and b) the user we authenticated +- */ +- if (!send_dbus_message (cookie, user_to_auth)) +- { +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: error sending D-Bus message to PolicyKit daemon\n"); +-#endif /* PAH_DEBUG */ +- goto error; +- } +- +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: successfully sent D-Bus message to PolicyKit daemon\n"); +-#endif /* PAH_DEBUG */ +- +- fprintf (stdout, "SUCCESS\n"); +- fflush (stdout); +- fflush (stderr); +- usleep (10 * 1000); /* since fflush(3) seems buggy */ +- return 0; +- +-error: +- if (pam_h != NULL) +- pam_end (pam_h, rc); +- +- fprintf (stdout, "FAILURE\n"); +- fflush (stdout); +- fflush (stderr); +- usleep (10 * 1000); /* since fflush(3) seems buggy */ +- return 1; +-} +- +-static int +-conversation_function (int n, const struct pam_message **msg, struct pam_response **resp, void *data) +-{ +- struct pam_response *aresp; +- char buf[PAM_MAX_RESP_SIZE]; +- int i; +- +- data = data; +- if (n <= 0 || n > PAM_MAX_NUM_MSG) +- return PAM_CONV_ERR; +- +- if ((aresp = calloc(n, sizeof *aresp)) == NULL) +- return PAM_BUF_ERR; +- +- for (i = 0; i < n; ++i) +- { +- aresp[i].resp_retcode = 0; +- aresp[i].resp = NULL; +- switch (msg[i]->msg_style) +- { +- +- case PAM_PROMPT_ECHO_OFF: +- fprintf (stdout, "PAM_PROMPT_ECHO_OFF "); +- goto conv1; +- +- case PAM_PROMPT_ECHO_ON: +- fprintf (stdout, "PAM_PROMPT_ECHO_ON "); +- conv1: +- fputs (msg[i]->msg, stdout); +- if (strlen (msg[i]->msg) > 0 && msg[i]->msg[strlen (msg[i]->msg) - 1] != '\n') +- fputc ('\n', stdout); +- fflush (stdout); +- +- if (fgets (buf, sizeof buf, stdin) == NULL) +- goto error; +- +- if (strlen (buf) > 0 && +- buf[strlen (buf) - 1] == '\n') +- buf[strlen (buf) - 1] = '\0'; +- +- aresp[i].resp = strdup (buf); +- if (aresp[i].resp == NULL) +- goto error; +- break; +- +- case PAM_ERROR_MSG: +- fprintf (stdout, "PAM_ERROR_MSG "); +- goto conv2; +- +- case PAM_TEXT_INFO: +- fprintf (stdout, "PAM_TEXT_INFO "); +- conv2: +- fputs (msg[i]->msg, stdout); +- if (strlen (msg[i]->msg) > 0 && +- msg[i]->msg[strlen (msg[i]->msg) - 1] != '\n') +- fputc ('\n', stdout); +- fflush (stdout); +- break; +- +- default: +- goto error; +- } +- } +- +- *resp = aresp; +- return PAM_SUCCESS; +- +-error: +- +- for (i = 0; i < n; ++i) +- { +- if (aresp[i].resp != NULL) { +- memset (aresp[i].resp, 0, strlen(aresp[i].resp)); +- free (aresp[i].resp); +- } +- } +- memset (aresp, 0, n * sizeof *aresp); +- *resp = NULL; +- return PAM_CONV_ERR; +-} +- +-static gboolean +-send_dbus_message (const char *cookie, const char *user) +-{ +- PolkitAuthority *authority; +- PolkitIdentity *identity; +- GError *error; +- gboolean ret; +- +- ret = FALSE; +- +- error = NULL; +- +- g_type_init (); +- +- authority = polkit_authority_get (); +- +- identity = polkit_unix_user_new_for_name (user, &error); +- if (identity == NULL) +- { +- g_printerr ("Error constructing identity: %s\n", error->message); +- g_error_free (error); +- goto out; +- } +- +- if (!polkit_authority_authentication_agent_response_sync (authority, +- cookie, +- identity, +- NULL, +- &error)) +- { +- g_printerr ("polkit-agent-helper-1: error response to PolicyKit daemon: %s\n", error->message); +- g_error_free (error); +- goto out; +- } +- +- ret = TRUE; +- +- out: +- +- if (identity != NULL) +- g_object_unref (identity); +- +- if (authority != NULL) +- g_object_unref (authority); +- +- return ret; +-} +diff --git a/src/polkitagent/polkitagenthelperprivate.c b/src/polkitagent/polkitagenthelperprivate.c +new file mode 100644 +index 0000000..abf5524 +--- /dev/null ++++ b/src/polkitagent/polkitagenthelperprivate.c +@@ -0,0 +1,97 @@ ++/* ++ * Copyright (C) 2009-2010 Red Hat, Inc. ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General ++ * Public License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ * Authors: David Zeuthen <davidz@redhat.com>, ++ * Andrew Psaltis <ampsaltis@gmail.com> ++ */ ++ ++#include "polkitagenthelperprivate.h" ++#include <stdio.h> ++ ++#ifndef HAVE_CLEARENV ++extern char **environ; ++ ++static int ++clearenv (void) ++{ ++ if (environ != NULL) ++ environ[0] = NULL; ++ return 0; ++} ++#endif ++ ++ ++gboolean ++send_dbus_message (const char *cookie, const char *user) ++{ ++ PolkitAuthority *authority; ++ PolkitIdentity *identity; ++ GError *error; ++ gboolean ret; ++ ++ ret = FALSE; ++ ++ error = NULL; ++ ++ g_type_init (); ++ ++ authority = polkit_authority_get (); ++ ++ identity = polkit_unix_user_new_for_name (user, &error); ++ if (identity == NULL) ++ { ++ g_printerr ("Error constructing identity: %s\n", error->message); ++ g_error_free (error); ++ goto out; ++ } ++ ++ if (!polkit_authority_authentication_agent_response_sync (authority, ++ cookie, ++ identity, ++ NULL, ++ &error)) ++ { ++ g_printerr ("polkit-agent-helper-1: error response to PolicyKit daemon: %s\n", error->message); ++ g_error_free (error); ++ goto out; ++ } ++ ++ ret = TRUE; ++ ++ out: ++ ++ if (identity != NULL) ++ g_object_unref (identity); ++ ++ if (authority != NULL) ++ g_object_unref (authority); ++ ++ return ret; ++} ++ ++/* fflush(3) stdin and stdout and wait a little bit. ++ * This replaces the three-line commands at the bottom of ++ * polkit-agent-helper-1's main() function. ++ */ ++void ++flush_and_wait () ++{ ++ fflush (stdout); ++ fflush (stderr); ++ usleep (10 * 1000); /* since fflush(3) seems buggy */ ++} +diff --git a/src/polkitagent/polkitagenthelperprivate.h b/src/polkitagent/polkitagenthelperprivate.h +new file mode 100644 +index 0000000..16f7ba4 +--- /dev/null ++++ b/src/polkitagent/polkitagenthelperprivate.h +@@ -0,0 +1,42 @@ ++/* ++ * Copyright (C) 2009-2010 Red Hat, Inc. ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General ++ * Public License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ * Authors: David Zeuthen <davidz@redhat.com>, ++ * Andrew Psaltis <ampsalits@gmail.com> ++ */ ++#ifndef __POLKIT_AGENT_HELPER_PRIVATE_H ++#define __POLKIT_AGENT_HELPER_PRIVATE_H ++ ++#include <polkit/polkit.h> ++ ++/* Development aid: define PAH_DEBUG to get debugging output. Do _NOT_ ++ * enable this in production builds; it may leak passwords and other ++ * sensitive information. ++ */ ++#undef PAH_DEBUG ++// #define PAH_DEBUG ++ ++#ifdef HAVE_SOLARIS ++# define LOG_AUTHPRIV (10<<3) ++#endif ++ ++gboolean send_dbus_message (const char *cookie, const char *user); ++ ++void flush_and_wait (); ++ ++#endif /* __POLKIT_AGENT_HELPER_PRIVATE_H */ +diff --git a/src/programs/pkexec.c b/src/programs/pkexec.c +index 17c191e..3e096bf 100644 +--- a/src/programs/pkexec.c ++++ b/src/programs/pkexec.c +@@ -34,7 +34,11 @@ + #include <grp.h> + #include <pwd.h> + #include <errno.h> ++ ++#ifdef POLKIT_AUTHFW_PAM + #include <security/pam_appl.h> ++#endif /* POLKIT_AUTHFW_PAM */ ++ + #include <syslog.h> + #include <stdarg.h> + +@@ -115,6 +119,7 @@ log_message (gint level, + + /* ---------------------------------------------------------------------------------------------------- */ + ++#ifdef POLKIT_AUTHFW_PAM + static int + pam_conversation_function (int n, + const struct pam_message **msg, +@@ -167,6 +172,7 @@ out: + pam_end (pam_h, rc); + return ret; + } ++#endif /* POLKIT_AUTHFW_PAM */ + + /* ---------------------------------------------------------------------------------------------------- */ + +@@ -741,11 +747,13 @@ main (int argc, char *argv[]) + * TODO: The question here is whether we should clear the limits before applying them? + * As evident above, neither su(1) (and, for that matter, nor sudo(8)) does this. + */ ++#ifdef POLKIT_AUTHW_PAM + if (!open_session (pw->pw_name)) + { + goto out; + } +- ++#endif /* POLKIT_AUTHFW_PAM */ ++ + /* become the user */ + if (setgroups (0, NULL) != 0) + { diff --git a/source/l/polkit/polkit.SlackBuild b/source/l/polkit/polkit.SlackBuild new file mode 100755 index 000000000..74193f135 --- /dev/null +++ b/source/l/polkit/polkit.SlackBuild @@ -0,0 +1,144 @@ +#!/bin/sh + +# Copyright 2009 Robby Workman, Northport, Alabama, USA +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=polkit +VERSION=${VERSION:-1_14bdfd8} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +# Apply the patch that makes --with-authfw=shadow work +cat $CWD/polkit-1-shadow.diff | patch -p1 --verbose || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +# Using polkit-user=hald for now for easier transition; I don't think the +# separate user account is actually required any more, but I could be wrong +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./autogen.sh \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --enable-gtk-doc \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --enable-man-pages \ + --mandir=/usr/man \ + --disable-static \ + --disable-introspection \ + --with-authfw=shadow \ + --enable-verbose-mode \ + --build=$ARCH-slackware-linux + # Deprecated: + #--with-polkit-user=hald \ + +#NOTE: The directory /etc/polkit-1/localauthority must be owned +# by root and have mode 700 +#NOTE: The directory /var/lib/polkit-1 must be owned +# by root and have mode 700 +#NOTE: The file ${exec_prefix}/libexec/polkit-agent-helper-1 must be owned +# by root and have mode 4755 (setuid root binary) +#NOTE: The file ${exec_prefix}/bin/pkexec must be owned by root and +# have mode 4755 (setuid root binary) + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README \ + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION; ln -s ../../share/gtk-doc/html/polkit-1 html +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/polkit/slack-desc b/source/l/polkit/slack-desc new file mode 100644 index 000000000..006d8a8e5 --- /dev/null +++ b/source/l/polkit/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +polkit: polkit (authentication framework) +polkit: +polkit: PolicyKit is an application-level toolkit for defining and handling +polkit: the policy that allows unprivileged processes to speak to privileged +polkit: processes. PolicyKit is specifically targeting applications in rich +polkit: desktop environments on multi-user UNIX-like operating systems. +polkit: +polkit: +polkit: +polkit: Home: http://www.freedesktop.org/wiki/Software/PolicyKit +polkit: diff --git a/source/l/poppler-data/poppler-data.SlackBuild b/source/l/poppler-data/poppler-data.SlackBuild index 090004d48..aa07f24d9 100755 --- a/source/l/poppler-data/poppler-data.SlackBuild +++ b/source/l/poppler-data/poppler-data.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,7 +22,7 @@ PKGNAM=poppler-data -VERSION=${VERSION:-0.2.1} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} ARCH=${ARCH:-noarch} BUILD=${BUILD:-1} @@ -35,7 +35,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -52,7 +52,7 @@ make install datadir=/usr/share DESTDIR=$PKG # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - COPYING README \ + COPYING* README \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install diff --git a/source/l/poppler/poppler.SlackBuild b/source/l/poppler/poppler.SlackBuild index 4f4f6f304..dcf3e8997 100755 --- a/source/l/poppler/poppler.SlackBuild +++ b/source/l/poppler/poppler.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,19 @@ PKGNAM=poppler -VERSION=${VERSION:-0.10.7} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -95,6 +107,14 @@ cp -a AUTHORS COPYING* INSTALL NEWS README README-XPDF TODO \ ( cd $PKG/usr/doc/${PKGNAM}-$VERSION ln -s /usr/share/gtk-doc/html/poppler html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/popt/popt.SlackBuild b/source/l/popt/popt.SlackBuild index 4e01dd527..b495de5c2 100755 --- a/source/l/popt/popt.SlackBuild +++ b/source/l/popt/popt.SlackBuild @@ -23,15 +23,22 @@ PKGNAM=popt VERSION=${VERSION:-1.7} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-3} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,8 +49,13 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} tar xjvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 @@ -69,15 +81,23 @@ CFLAGS="$SLKCFLAGS" \ --build=$ARCH-slackware-linux # Build and install: -make -j4 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Strip binaries: -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# Move the binary and shared library to /sbin and /lib(64) +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + for file in lib*.so.?.* ; do + mv $file ../../lib${LIBDIRSUFFIX} + ln -sf ../../lib${LIBDIRSUFFIX}/$file . + done + cp -a lib*.so.? ../../lib${LIBDIRSUFFIX} ) +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then ( cd $PKG/usr/man diff --git a/source/l/pycairo/pycairo.SlackBuild b/source/l/pycairo/pycairo.SlackBuild index f8ab9c71e..2ca6a2f2d 100755 --- a/source/l/pycairo/pycairo.SlackBuild +++ b/source/l/pycairo/pycairo.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for pycairo # Copyright 2007 by Eric Hameleers <alien@slackbuilds.org> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,13 +24,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=pycairo -VERSION=1.8.4 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +PKGNAM=pycairo +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -43,19 +52,22 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.*z* || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -80,14 +92,22 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - AUTHORS COPYING* ChangeLog INSTALL NEWS NOTES README \ - $PKG/usr/doc/$PRGNAM-$VERSION + AUTHORS COPYING* INSTALL NEWS README \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/pycairo/pycairo.info b/source/l/pycairo/pycairo.info deleted file mode 100644 index 5882ba318..000000000 --- a/source/l/pycairo/pycairo.info +++ /dev/null @@ -1,2 +0,0 @@ -HOMEPAGE="http://cairographics.org/pycairo" -DOWNLOAD="http://cairographics.org/releases/pycairo-1.8.2.tar.gz" diff --git a/source/l/pycairo/pycairo.url b/source/l/pycairo/pycairo.url new file mode 100644 index 000000000..afad76d4d --- /dev/null +++ b/source/l/pycairo/pycairo.url @@ -0,0 +1,2 @@ +http://cairographics.org/pycairo +http://cairographics.org/releases/ diff --git a/source/l/pycups/pycups.SlackBuild b/source/l/pycups/pycups.SlackBuild index a250d508e..00c8f3e12 100755 --- a/source/l/pycups/pycups.SlackBuild +++ b/source/l/pycups/pycups.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,22 +24,32 @@ # Modified by Robby Workman <rworkman@slackware.com> -PRGNAM=pycups -VERSION=${VERSION:-1.9.45} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=pycups +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -53,12 +63,20 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "shared object" -e "executable" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a COPYING* NEWS README TODO $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a COPYING* NEWS README TODO $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/pygobject/pygobject.SlackBuild b/source/l/pygobject/pygobject.SlackBuild index a6750e3d5..a54d2bd34 100755 --- a/source/l/pygobject/pygobject.SlackBuild +++ b/source/l/pygobject/pygobject.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007, 2008 Erik Hanson erik@slackbuilds.org -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,13 +22,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=pygobject -VERSION=2.16.1 -ARCH=${ARCH:-x86_64} +PKGNAM=pygobject +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,18 +50,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -75,17 +87,25 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ INSTALL AUTHORS COPYING NEWS README \ - $PKG/usr/doc/$PRGNAM-$VERSION -( cd $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION ln -s ../../share/gtk-doc/html/pygobject html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/pygobject/pygobject.info b/source/l/pygobject/pygobject.info deleted file mode 100644 index b67cef497..000000000 --- a/source/l/pygobject/pygobject.info +++ /dev/null @@ -1,2 +0,0 @@ -HOMEPAGE="http://www.pygtk.org/" -DOWNLOAD="http://ftp.gnome.org/pub/GNOME/sources/pygobject/2.16/pygobject-2.16.0.tar.bz2" diff --git a/source/l/pygobject/pygobject.url b/source/l/pygobject/pygobject.url new file mode 100644 index 000000000..85ab64cf1 --- /dev/null +++ b/source/l/pygobject/pygobject.url @@ -0,0 +1,2 @@ +http://www.pygtk.org/ +http://ftp.gnome.org/pub/GNOME/sources/pygobject/ diff --git a/source/l/pygtk/pygtk.SlackBuild b/source/l/pygtk/pygtk.SlackBuild index 3055ba30e..7823f4dd8 100755 --- a/source/l/pygtk/pygtk.SlackBuild +++ b/source/l/pygtk/pygtk.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Erik Hanson erik@slackbuilds.org -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,13 +22,26 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=pygtk -VERSION=2.14.1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=pygtk +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,18 +54,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -75,17 +87,25 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ MAPPING PKG-INFO INSTALL TODO AUTHORS COPYING NEWS README \ - $PKG/usr/doc/$PRGNAM-$VERSION -( cd $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION ln -s ../../share/gtk-doc/html/pygtk html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/qca/qca.SlackBuild b/source/l/qca/qca.SlackBuild index de767cf53..49367ffc9 100755 --- a/source/l/qca/qca.SlackBuild +++ b/source/l/qca/qca.SlackBuild @@ -24,11 +24,19 @@ # No additional license terms and no copyright claim PKGNAM=qca -VERSION=2.0.1 -ARCH=${ARCH:-x86_64} +VERSION=2.0.2 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} diff --git a/source/l/qt/README b/source/l/qt/README index c5b4d85a9..bdf9be993 100644 --- a/source/l/qt/README +++ b/source/l/qt/README @@ -1,6 +1,8 @@ -qt-rXXXXXX is actually qt-copy (kde's own version that might be -slightly incompatible with released version) renamed. +qt-<version>_<git revision> is actually KDE's version of Qt from git +that includes important patches not yet present in mainline Qt. -It also contains less documentation -- you can grab the vanilla -Qt if you need it. +The recommended version of Qt for KDE may be obtained from the +repository with this command: + +git clone git://gitorious.org/+kde-developers/qt/kde-qt.git diff --git a/source/l/qt/qt.SlackBuild b/source/l/qt/qt.SlackBuild index 3bd6fe560..c04221c34 100755 --- a/source/l/qt/qt.SlackBuild +++ b/source/l/qt/qt.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,14 +23,30 @@ # Merged some ideas from Alex Sarmardzic's script for qt4 at SlackBuilds.org # ^^ Modified by Robby Workman <rworkman@slackware.com> for QT4 & KDE4 -# We're using qt-copy instead of a released qt version, as this svn release -# has at least one bugfix strongly recommended by the kde developers +# We're using qt-copy instead of a released qt version, as this git release +# has at least one bugfix strongly recommended by the kde developers. + +# Obtained from: +# git clone git://gitorious.org/+kde-developers/qt/kde-qt.git +# git checkout origin/4.5.3-patched +# git checkout origin/4.6.0-stable-patched +# git checkout origin/4.6.1-patched +# wget http://qt.gitorious.org/qt/kde-qt/archive-tarball/4.6.2-patched PKGNAM=qt -VERSION=$(ls qt-r*.tar.?z* | cut -d - -f 2 | cut -f 1 -d . | tail -1) -ARCH=${ARCH:-x86_64} +VERSION=$(ls qt-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev) BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j7} if [ "$ARCH" = "i486" ]; then @@ -42,6 +58,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -92,25 +111,28 @@ fi # Fix path to mysql header zcat $CWD/qt.mysql.h.diff.gz | patch -p1 || exit 1 -# The "o" selects the Open Source edition of Qt. -# The "yes" agrees to the GPL, so don't run this script if you don't agree. :-) export CFLAGS="$SLKCFLAGS" export CXXFLAGS="$SLKCFLAGS" export OPENSOURCE_CXXFLAGS="$SLKCFLAGS" -echo "o -yes" | ./configure \ +./configure \ + -confirm-license \ + -opensource \ -prefix /usr/lib${LIBDIRSUFFIX}/qt \ -qt-gif \ -fast \ -system-libpng \ -system-libjpeg \ -system-zlib \ + -system-sqlite \ + -plugin-sql-sqlite \ -dbus \ -webkit \ -no-phonon \ -nomake examples \ -nomake demos \ - -no-separate-debug-info + -no-separate-debug-info \ + -no-pch + # No-precompiled-headers is ccache-friendly. # Sometimes a failure happens when parallelizing make. Try again if make fails, # but make a failure the second time around (single threaded) a fatal error: diff --git a/source/l/qt/slack-desc b/source/l/qt/slack-desc index 8229dd0a8..3f77a7fb4 100644 --- a/source/l/qt/slack-desc +++ b/source/l/qt/slack-desc @@ -15,5 +15,5 @@ qt: qt: qt: qt: -qt: +qt: Homepage: http://qt.nokia.com qt: diff --git a/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild b/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild index ed66c9bb5..9664ddb22 100755 --- a/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild +++ b/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild @@ -25,8 +25,17 @@ PRGNAM=qtscriptgenerator VERSION=${VERSION:-0.1.0} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -50,6 +59,9 @@ elif [ "$ARCH" = "arm" ]; then elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi # Avoid a version number in .la files: @@ -63,6 +75,9 @@ cd $TMP rm -rf $PRGNAM-src-$VERSION tar xvf $CWD/$PRGNAM-src-$VERSION.tar.?z* || exit 1 cd $PRGNAM-src-$VERSION || exit 1 + +zcat $CWD/qtscriptgenerator.gcc44.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff b/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff new file mode 100644 index 000000000..165c97df0 --- /dev/null +++ b/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff @@ -0,0 +1,10 @@ +--- ./generator/parser/rpp/pp-internal.h.orig 2009-02-20 05:42:24.000000000 -0600 ++++ ./generator/parser/rpp/pp-internal.h 2010-02-18 19:12:22.000000000 -0600 +@@ -16,6 +16,7 @@ + #define PP_INTERNAL_H + + #include <algorithm> ++#include <cstdio> + + namespace rpp { + diff --git a/source/l/raptor/raptor.SlackBuild b/source/l/raptor/raptor.SlackBuild index 386ef4c45..1c57b5d09 100755 --- a/source/l/raptor/raptor.SlackBuild +++ b/source/l/raptor/raptor.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,10 +25,19 @@ # No added terms or copyright claims -VERSION=1.4.18 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo raptor-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) @@ -44,13 +53,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf raptor-$VERSION -tar xvf $CWD/raptor-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/raptor-$VERSION.tar.xz || exit 1 cd raptor-$VERSION || exit 1 chown -R root:root . find . \ @@ -83,13 +95,21 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/raptor-$VERSION cp -a \ - AUTHORS ChangeLog* COPYING* INSTALL* LICENSE* NEWS* \ + AUTHORS COPYING* INSTALL* LICENSE* NEWS* \ NOTICE README* RELEASE.html \ $PKG/usr/doc/raptor-$VERSION ( cd $PKG/usr/doc/raptor-$VERSION ln -s /usr/share/gtk-doc/html/raptor html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/rasqal/rasqal.SlackBuild b/source/l/rasqal/rasqal.SlackBuild index 730d952d4..9ef4cbf3e 100755 --- a/source/l/rasqal/rasqal.SlackBuild +++ b/source/l/rasqal/rasqal.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,18 +22,27 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified by Robby Workman <rworkman@slackware.com> +# Modified by Eric Hameleers <alien@slackware.com> # No added terms or copyright claims - -VERSION=0.9.16 -ARCH=${ARCH:-x86_64} +PKGNAM=rasqal +VERSION=${VERSION:-0.9.19} BUILD=${BUILD:-1} - NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-rasqal +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -44,14 +53,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf rasqal-$VERSION -tar xvf $CWD/rasqal-$VERSION.tar.bz2 || exit 1 -cd rasqal-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -81,17 +93,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/rasqal-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* INSTALL INSTALL.html LICENSE* NEWS* NOTICE README* \ - $PKG/usr/doc/rasqal-$VERSION -( cd $PKG/usr/doc/rasqal-$VERSION - ln -s /usr/share/gtk-doc/html/rasqal html + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION + ln -s /usr/share/gtk-doc/html/$PKGNAM html ) mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/rasqal-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/rasqal/rasqal.info b/source/l/rasqal/rasqal.info deleted file mode 100644 index 9605aee70..000000000 --- a/source/l/rasqal/rasqal.info +++ /dev/null @@ -1,5 +0,0 @@ -PRGNAM="rasqal" -VERSION="0.9.15" -HOMEPAGE="http://librdf.org/" -DOWNLOAD="http://download.librdf.org/source/rasqal-0.9.15.tar.gz" -MD5SUM="22aa82cd8953e2a870b6f183268a957f" diff --git a/source/l/rasqal/slack-desc b/source/l/rasqal/slack-desc index b029384b4..46e8b19c1 100644 --- a/source/l/rasqal/slack-desc +++ b/source/l/rasqal/slack-desc @@ -7,6 +7,6 @@ rasqal: constructing the queries, executing them and returning result formats. rasqal: It currently handles the RDF Data Query Language (RDQL) and SPARQL rasqal: Query language. rasqal: -rasqal: Homepage: http://librdf.org/ rasqal: +rasqal: Homepage: http://librdf.org/ rasqal: diff --git a/source/l/redland/redland.SlackBuild b/source/l/redland/redland.SlackBuild index 893d80efe..85ee69242 100755 --- a/source/l/redland/redland.SlackBuild +++ b/source/l/redland/redland.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,17 +22,28 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified by Robby Workman <rworkman@slackware.com> +# Modified by Eric Hameleers <alien@slackware.com> # No added terms and no copyright claims -VERSION=1.0.8 -ARCH=${ARCH:-x86_64} +PKGNAM=redland +VERSION=${VERSION:-1.0.10} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-redland +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -43,14 +54,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf redland-$VERSION -tar xvf $CWD/redland-$VERSION.tar.bz2 || exit 1 -cd redland-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -58,6 +73,16 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +if [ "$VERSION" = "1.0.9" ]; then + echo "Fixing a bug in redland-1.0.9 that breaks nepomuk..." + for i in MYSQL POSTGRESQL SQLITE TSTORE; do + sed -i "s/LIBADD = @${i}_LIBS@/LIBADD = @${i}_LIBS@ librdf.la/" \ + src/Makefile.in + done +elif [ "$VERSION" = "1.0.10" ]; then + sed -i "s/virtuoso_la_LIBADD = @ODBC_LIBS@/virtuoso_la_LIBADD = @ODBC_LIBS@ librdf.la/" src/Makefile.in +fi + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ @@ -67,9 +92,14 @@ CXXFLAGS="$SLKCFLAGS" \ --localstatedir=/var \ --mandir=/usr/man \ --disable-static \ + --with-included-ltdl=no \ + --with-bdb-lib=/usr/lib${LIBDIRSUFFIX} \ --with-threads \ --build=$ARCH-slackware-linux +# Prevent error "No rule to make target `-lltdl', needed by `librdf.la'" +sed -i -e 's# -lltdl$# #' -e '/^LIBS =/s# = # = -lltdl #' src/Makefile + make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -81,18 +111,18 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/redland-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* INSTALL INSTALL.html LICENSE* NEWS* NOTICE \ README* RELEASE.html TODO* \ - $PKG/usr/doc/redland-$VERSION -( cd $PKG/usr/doc/redland-$VERSION - ln -s /usr/share/gtk-doc/html/redland html + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION + ln -s /usr/share/gtk-doc/html/$PKGNAM html ) mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/redland-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/redland/redland.info b/source/l/redland/redland.info deleted file mode 100644 index 4ff4571c6..000000000 --- a/source/l/redland/redland.info +++ /dev/null @@ -1,5 +0,0 @@ -PRGNAM="redland" -VERSION="1.0.7" -HOMEPAGE="http://librdf.org/" -DOWNLOAD="http://download.librdf.org/source/redland-1.0.7.tar.gz" -MD5SUM="4c066d3dcf6c25f8fb8c9007e73f293c" diff --git a/source/l/sdl/SDL_mixer-1.2.8.usrlocal.diff b/source/l/sdl/SDL_mixer-1.2.8.usrlocal.diff deleted file mode 100644 index 3ae36ae72..000000000 --- a/source/l/sdl/SDL_mixer-1.2.8.usrlocal.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./timidity/config.h.orig 2007-07-01 21:03:51.000000000 -0500 -+++ ./timidity/config.h 2008-03-13 14:36:20.000000000 -0500 -@@ -176,7 +176,7 @@ - #if defined(__WIN32__) || defined(__OS2__) - #define DEFAULT_PATH "\\TIMIDITY" - #else --#define DEFAULT_PATH "/usr/local/lib/timidity" -+#define DEFAULT_PATH "/usr/lib/timidity" - #endif - - /* These affect general volume */ diff --git a/source/l/sdl/SDL_mixer.usrlocal.diff b/source/l/sdl/SDL_mixer.usrlocal.diff new file mode 100644 index 000000000..4630e9ea6 --- /dev/null +++ b/source/l/sdl/SDL_mixer.usrlocal.diff @@ -0,0 +1,11 @@ +--- ./timidity/config.h.orig 2010-02-14 17:14:44.000000000 -0600 ++++ ./timidity/config.h 2010-02-14 17:15:45.000000000 -0600 +@@ -179,7 +179,7 @@ + #else + #define DEFAULT_PATH "/etc/timidity" + #define DEFAULT_PATH1 "/usr/share/timidity" +-#define DEFAULT_PATH2 "/usr/local/lib/timidity" ++#define DEFAULT_PATH2 "/usr/lib/timidity" + #endif + + /* These affect general volume */ diff --git a/source/l/sdl/sdl.SlackBuild b/source/l/sdl/sdl.SlackBuild index 0c351f8df..044c1f85f 100755 --- a/source/l/sdl/sdl.SlackBuild +++ b/source/l/sdl/sdl.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,14 +20,23 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=1.2.13 -IMAGE=1.2.7 -MIXER=1.2.8 -NET=1.2.7 -TTF=2.0.9 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +VERSION=${VERSION:-$(echo SDL-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +IMAGE=${IMAGE:-$(echo SDL_image-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +MIXER=${MIXER:-$(echo SDL_mixer-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +NET=${NET:-$(echo SDL_net-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +TTF=${TTF:-$(echo SDL_ttf-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} + +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -40,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -50,7 +62,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf sdl-$VERSION -tar xjf $CWD/SDL-$VERSION.tar.bz2 || exit 1 +tar xf $CWD/SDL-$VERSION.tar.?z* || exit 1 cd SDL-$VERSION chown -R root:root . find . \ @@ -92,7 +104,7 @@ cat $CWD/slack-desc > $PKG/install/slack-desc # Add SDL_image: cd $TMP rm -rf SDL_image-$IMAGE -tar xjf $CWD/SDL_image-$IMAGE.tar.bz2 || exit 1 +tar xf $CWD/SDL_image-$IMAGE.tar.?z* || exit 1 cd SDL_image-$IMAGE chown -R root:root . find . \ @@ -123,11 +135,24 @@ cp -a \ # Add SDL_mixer: cd $TMP rm -rf SDL_mixer-$MIXER -tar xjf $CWD/SDL_mixer-$MIXER.tar.bz2 || exit 1 +tar xf $CWD/SDL_mixer-$MIXER.tar.?z* || exit 1 cd SDL_mixer-$MIXER # Don't look for things in /usr/local, since this is an installed package: -zcat $CWD/SDL_mixer-1.2.8.usrlocal.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/SDL_mixer.usrlocal.diff.gz | patch -p1 --verbose || exit 1 + +# Install patched static libmikmod: +unzip libmikmod-3.1.12.zip +( cd libmikmod-3.1.12.patched + ./configure \ + --prefix=/usr/local \ + --libdir=/usr/local/lib${LIBDIRSUFFIX} \ + --with-pic \ + --enable-shared=no \ + --enable-static=yes + make $NUMJOBS || make || exit 1 + make install +) chown -R root:root . find . \ @@ -141,6 +166,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --mandir=/usr/man \ + --enable-music-mod \ --enable-shared=yes \ --enable-static=no @@ -155,7 +181,7 @@ cp -a \ # Add SDL_net: cd $TMP rm -rf SDL_net-$NET -tar xjf $CWD/SDL_net-$NET.tar.bz2 || exit 1 +tar xf $CWD/SDL_net-$NET.tar.?z* || exit 1 cd SDL_net-$NET chown -R root:root . find . \ @@ -183,7 +209,7 @@ cp -a \ # Add SDL_ttf: cd $TMP rm -rf SDL_ttf-$TTF -tar xjf $CWD/SDL_ttf-$TTF.tar.bz2 || exit 1 +tar xf $CWD/SDL_ttf-$TTF.tar.?z* || exit 1 cd SDL_ttf-$TTF #zcat $CWD/SDL_ttf-2.0.8-noftinternals.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild b/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild new file mode 100755 index 000000000..602012b0f --- /dev/null +++ b/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild @@ -0,0 +1,107 @@ +#!/bin/sh + +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VERSION=${VERSION:-0.3} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-shared-desktop-ontologies + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf shared-desktop-ontologies-$VERSION +tar xvf $CWD/shared-desktop-ontologies-$VERSION.tar.?z* || exit 1 +cd shared-desktop-ontologies-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ + PATH=$QTDIR/bin:$PATH \ + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/shared-desktop-ontologies-$VERSION +cp -a \ + AUTHORS LICENSE* README \ + $PKG/usr/doc/shared-desktop-ontologies-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/shared-desktop-ontologies-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/shared-desktop-ontologies/slack-desc b/source/l/shared-desktop-ontologies/slack-desc new file mode 100644 index 000000000..8057846b4 --- /dev/null +++ b/source/l/shared-desktop-ontologies/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +shared-desktop-ontologies: shared-desktop-ontologies (Shared OSCAF desktop ontologies) +shared-desktop-ontologies: +shared-desktop-ontologies: The shared-desktop-ontologies package brings the semantic web to +shared-desktop-ontologies: the desktop in terms of vocabulary. It contains the well known core +shared-desktop-ontologies: ontologies such as RDF and RDFS as well as the Nepomuk ontologies +shared-desktop-ontologies: which are used by projects like KDE or Strigi. +shared-desktop-ontologies: +shared-desktop-ontologies: +shared-desktop-ontologies: +shared-desktop-ontologies: Homepage: http://oscaf.sourceforge.net +shared-desktop-ontologies: diff --git a/source/l/shared-mime-info/doinst.sh b/source/l/shared-mime-info/doinst.sh index bce08d419..387262254 100644 --- a/source/l/shared-mime-info/doinst.sh +++ b/source/l/shared-mime-info/doinst.sh @@ -1,4 +1,19 @@ +#!/bin/sh if [ -x /usr/bin/update-mime-database ]; then - chroot . /usr/bin/update-mime-database /usr/share/mime 1>/dev/null 2>/dev/null + /usr/bin/update-mime-database /usr/share/mime 1>/dev/null 2>/dev/null + cat /etc/passwd | while read passwdline ; do + homedir=$(echo $passwdline | cut -f 6 -d :) + if [ -d $homedir/.local/share/mime ]; then + username=$(echo $passwdline | cut -f 1 -d :) + # Sorry about the long command line, alienBOB ;-) + su $username -c "/usr/bin/update-mime-database $homemimedir 1>/dev/null 2>/dev/null" 2> /dev/null + fi + done + # This is just "cleanup" in case something might be missed in /home/*/ + for homemimedir in /home/*/.local/share/mime ; do + if [ -d $homemimedir ]; then + username=$(echo $homemimedir | cut -f 3 -d /) + su $username -c "/usr/bin/update-mime-database $homemimedir 1>/dev/null 2>/dev/null" 2> /dev/null + fi + done fi - diff --git a/source/l/shared-mime-info/shared-mime-info.SlackBuild b/source/l/shared-mime-info/shared-mime-info.SlackBuild index 999527358..81d5f01ba 100755 --- a/source/l/shared-mime-info/shared-mime-info.SlackBuild +++ b/source/l/shared-mime-info/shared-mime-info.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.60} -ARCH=${ARCH:-x86_64} +PKGNAM=shared-mime-info +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,19 +46,22 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-shared-mime-info +PKG=$TMP/package-${PKGNAM} rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf shared-mime-info-$VERSION -tar xvf $CWD/shared-mime-info-$VERSION.tar.bz2 || exit 1 -cd shared-mime-info-$VERSION || exit 1 +rm -rf ${PKGNAM}-$VERSION +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -60,7 +73,7 @@ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --mandir=/usr/man \ - --docdir=/usr/doc/shared-mime-info-$VERSION \ + --docdir=/usr/doc/${PKGNAM}-$VERSION \ --disable-update-mimedb \ --build=$ARCH-slackware-linux @@ -85,16 +98,24 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/shared-mime-info-$VERSION +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ COPYING* HACKING NEWS README* \ - $PKG/usr/doc/shared-mime-info-$VERSION -chmod 644 $PKG/usr/doc/shared-mime-info-$VERSION/* + $PKG/usr/doc/${PKGNAM}-$VERSION +chmod 644 $PKG/usr/doc/${PKGNAM}-$VERSION/* + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/shared-mime-info-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/sip/sip.SlackBuild b/source/l/sip/sip.SlackBuild index 0379743a2..e46740e49 100755 --- a/source/l/sip/sip.SlackBuild +++ b/source/l/sip/sip.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Aleksandar Samardzic <asamardzic@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,21 +24,31 @@ # Modified by Robby Workman <rworkman@slackware.com> -VERSION=${VERSION:-4.7.9} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-4.10.2} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-sip +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi PYTHONVER=$(python -V 2>&1 | cut -f 2 -d' ' | cut -f 1-2 -d.) @@ -48,7 +58,7 @@ rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP rm -rf sip-$VERSION -tar xvf $CWD/sip-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/sip-$VERSION.tar.?z* || exit 1 cd sip-$VERSION || exit 1 chown -R root:root . find . \ @@ -80,5 +90,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/sip-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/sip-$(echo $VERSION |tr - _)-$ARCH-$BUILD.txz diff --git a/source/l/sip/sip.info b/source/l/sip/sip.info index 5198037eb..034776a0b 100644 --- a/source/l/sip/sip.info +++ b/source/l/sip/sip.info @@ -1,2 +1,2 @@ HOMEPAGE="http://www.riverbankcomputing.co.uk/software/sip/" -DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/sip4/sip-4.7.6.tar.gz" +DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/sip4/sip-4.8.2.tar.gz" diff --git a/source/l/sip/slack-desc b/source/l/sip/slack-desc index d2fae243e..01147eeaf 100644 --- a/source/l/sip/slack-desc +++ b/source/l/sip/slack-desc @@ -13,7 +13,7 @@ sip: C and C++ libraries. It was originally developed to create PyQt, sip: the Python bindings for the Qt toolkit, but can be used to create sip: bindings for any C or C++ library. sip: -sip: Homepage: http://www.riverbankcomputing.co.uk/software/sip/ sip: sip: +sip: Homepage: http://www.riverbankcomputing.co.uk/software/sip/ sip: diff --git a/source/l/slang/slang.SlackBuild b/source/l/slang/slang.SlackBuild index 17a4f14a9..115e24af0 100755 --- a/source/l/slang/slang.SlackBuild +++ b/source/l/slang/slang.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.1.4} -#DOCV=${DOCV:-2.0.4} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-2.2.2} +#DOCV=${DOCV:-2.2.2} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) diff --git a/source/l/soprano/slack-desc b/source/l/soprano/slack-desc index 387be5795..1cb3f2f8c 100644 --- a/source/l/soprano/slack-desc +++ b/source/l/soprano/slack-desc @@ -13,7 +13,7 @@ soprano: a nice Qt interface to RDF storage solutions. It has a modular soprano: structure which allows to replace the actual RDF storage soprano: implementation used. soprano: -soprano: Homepage: http://soprano.sourceforge.net/ soprano: soprano: +soprano: Homepage: http://soprano.sourceforge.net/ soprano: diff --git a/source/l/soprano/soprano.SlackBuild b/source/l/soprano/soprano.SlackBuild index dafbb7683..3fbdc8fc5 100755 --- a/source/l/soprano/soprano.SlackBuild +++ b/source/l/soprano/soprano.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007-2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.2.3 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-2.4.3} BUILD=${BUILD:-1} - NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-soprano @@ -41,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -61,7 +72,6 @@ cd build QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ PATH=$QTDIR/bin:$PATH \ cmake \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_INSTALL_PREFIX=/usr \ diff --git a/source/l/soprano/soprano.info b/source/l/soprano/soprano.info deleted file mode 100644 index e66984fa5..000000000 --- a/source/l/soprano/soprano.info +++ /dev/null @@ -1 +0,0 @@ -HOMEPAGE="http://soprano.sourceforge.net/" diff --git a/source/l/startup-notification/startup-notification.SlackBuild b/source/l/startup-notification/startup-notification.SlackBuild index c4135c124..c247069fa 100755 --- a/source/l/startup-notification/startup-notification.SlackBuild +++ b/source/l/startup-notification/startup-notification.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.9 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo startup-notification-*.tar.?z* | cut -d - -f 3 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "i486" ]; then +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + + +if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then @@ -39,14 +46,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-startup-notification + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP rm -rf startup-notification-$VERSION tar xvf $CWD/startup-notification-$VERSION.tar.bz2 || exit 1 @@ -64,6 +74,7 @@ CFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ --localstatedir=/var/lib \ + --disable-static \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 diff --git a/source/l/strigi/strigi.SlackBuild b/source/l/strigi/strigi.SlackBuild index 2a9dcb4ae..3a0ce7228 100755 --- a/source/l/strigi/strigi.SlackBuild +++ b/source/l/strigi/strigi.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007-2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.6.4 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo strigi-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-strigi @@ -40,13 +50,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf strigi-$VERSION -tar xvf $CWD/strigi-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/strigi-$VERSION.tar.?z* || exit 1 cd strigi-$VERSION || exit 1 chown -R root:root . find . \ @@ -78,9 +91,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/strigi-$VERSION cp -a \ - AUTHORS COPYING ChangeLog NEWS README TODO \ + AUTHORS COPYING NEWS README TODO \ $PKG/usr/doc/strigi-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/system-config-printer/doinst.sh b/source/l/system-config-printer/doinst.sh new file mode 100644 index 000000000..214038e76 --- /dev/null +++ b/source/l/system-config-printer/doinst.sh @@ -0,0 +1,21 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/dbus-1/system.d/newprinternotification.conf.new +config etc/dbus-1/system.d/printerdriversinstaller.conf.new + +# Update the desktop database: +if [ -x usr/bin/update-desktop-database ]; then + chroot . /usr/bin/update-desktop-database usr/share/applications > /dev/null 2>&1 +fi + diff --git a/source/l/system-config-printer/slack-desc b/source/l/system-config-printer/slack-desc new file mode 100644 index 000000000..fea4646e9 --- /dev/null +++ b/source/l/system-config-printer/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +system-config-printer: system-config-printer (CUPS printer administration tool) +system-config-printer: +system-config-printer: The purpose of the tool is to configure a CUPS server (often the local +system-config-printer: machine) using the CUPS API. The tool is written in Python, using +system-config-printer: pygtk for the graphical parts and Python bindings (pycups) for the +system-config-printer: CUPS API. It is largely the same as using the CUPS web interface for +system-config-printer: configuring printers, but has the advantage of being a native +system-config-printer: application rather than a web page. +system-config-printer: +system-config-printer: Home: http://cyberelk.net/tim/software/system-config-printer/ +system-config-printer: diff --git a/source/l/system-config-printer/system-config-printer.SlackBuild b/source/l/system-config-printer/system-config-printer.SlackBuild new file mode 100755 index 000000000..17bc73274 --- /dev/null +++ b/source/l/system-config-printer/system-config-printer.SlackBuild @@ -0,0 +1,128 @@ +#!/bin/sh + +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Permission to use, copy, modify, and distribute this software for +# any purpose with or without fee is hereby granted, provided that +# the above copyright notice and this permission notice appear in all +# copies. +# +# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF +# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. +# ----------------------------------------------------------------------------- + +# Set initial variables: + +PKGNAM=system-config-printer +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:" -j4 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +LDFLAGS="$SLKLDFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --localstatedir=/var/lib \ + --sysconfdir=/etc \ + --with-udev-rules \ + --program-prefix= \ + --program-suffix= \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +# Slackware does not use PAM. Instead, your user must be in group 'lp'. +sed -i -e 's/at_console="true"/group="lp"/g' \ + $PKG/etc/dbus-1/system.d/newprinternotification.conf + +# Don't clobber the configuration file: +mv $PKG/etc/dbus-1/system.d/newprinternotification.conf{,.new} +mv $PKG/etc/dbus-1/system.d/printerdriversinstaller.conf{,.new} + +# Add documentation: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING README \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# Compress the man page(s): +if [ -d $PKG/usr/man ]; then + find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; + for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done +fi + +# Strip binaries (if any): +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a package description: +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +# Build the package: +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz + diff --git a/source/l/taglib-extras/taglib-extras.SlackBuild b/source/l/taglib-extras/taglib-extras.SlackBuild index 307409f3f..8004a3aad 100755 --- a/source/l/taglib-extras/taglib-extras.SlackBuild +++ b/source/l/taglib-extras/taglib-extras.SlackBuild @@ -21,7 +21,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.1.3} +VERSION=${VERSION:-1.0.1} ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} @@ -53,7 +53,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf taglib-extras tar xvf $CWD/taglib-extras-$VERSION.tar.?z* || exit 1 -cd taglib-extras || exit 1 +cd taglib-extras-${VERSION} || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/l/taglib/taglib.SlackBuild b/source/l/taglib/taglib.SlackBuild index 9aa57b146..b330f32b6 100755 --- a/source/l/taglib/taglib.SlackBuild +++ b/source/l/taglib/taglib.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.5 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo taglib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf taglib-$VERSION -tar xvf $CWD/taglib-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/taglib-$VERSION.tar.?z* || exit 1 cd taglib-$VERSION chown -R root:root . find . \ @@ -60,6 +72,8 @@ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --enable-mp4 \ + --enable-asf \ --program-prefix="" \ --program-suffix="" \ --build=$ARCH-slackware-linux @@ -72,7 +86,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ mkdir -p $PKG/usr/doc/taglib-$VERSION cp -a \ - AUTHORS COPYING INSTALL README TODO \ + AUTHORS COPYING* INSTALL README TODO \ $PKG/usr/doc/taglib-$VERSION mkdir -p $PKG/install diff --git a/source/l/urwid/urwid.SlackBuild b/source/l/urwid/urwid.SlackBuild index 976a39836..b34a618a6 100755 --- a/source/l/urwid/urwid.SlackBuild +++ b/source/l/urwid/urwid.SlackBuild @@ -25,10 +25,19 @@ # Modified by Robby Workman <rworkman@slackware.com> PRGNAM=urwid -VERSION=0.9.8.4 -ARCH=${ARCH:-x86_64} # This should match the python package +VERSION=0.9.9.1 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PRGNAM @@ -36,7 +45,7 @@ PKG=$TMP/package-$PRGNAM rm -rf $PKG $TMP/$PRGNAM-$VERSION mkdir -p $TMP $PKG cd $TMP || exit 1 -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z cd $PRGNAM-$VERSION || exit 1 chown -R root.root . find . \ diff --git a/source/l/v4l-utils/slack-desc b/source/l/v4l-utils/slack-desc new file mode 100644 index 000000000..574911598 --- /dev/null +++ b/source/l/v4l-utils/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +v4l-utils: v4l-utils (libraries and utilities for video4linux) +v4l-utils: +v4l-utils: libv4l is a collection of libraries which adds a thin abstraction +v4l-utils: layer on top of video4linux2 devices. The purpose of this (thin) +v4l-utils: layer is to make it easy for application writers to support a wide +v4l-utils: variety of devices without having to write seperate code for +v4l-utils: different devices in the same class. Linux V4L2 and DVB API +v4l-utils: utilities are also included. +v4l-utils: +v4l-utils: Homepage: http://freshmeat.net/projects/libv4l +v4l-utils: diff --git a/source/l/v4l-utils/v4l-utils.SlackBuild b/source/l/v4l-utils/v4l-utils.SlackBuild new file mode 100755 index 000000000..5b96939c1 --- /dev/null +++ b/source/l/v4l-utils/v4l-utils.SlackBuild @@ -0,0 +1,97 @@ +#!/bin/sh + +# Copyright 2009 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=v4l-utils +VERSION=0.8.0 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:--j6} +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Build and install: +export CFLAGS="$SLKCFLAGS" +export CPPFLAGS="$SLKCFLAGS" +export LDFLAGS="$SLKLDFLAGS" +make ${NUMJOBS} PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} || \ + make PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} || \ + exit 1 +make install PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + COPYING* ChangeLog README* TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/virtuoso-ose/doinst.sh b/source/l/virtuoso-ose/doinst.sh new file mode 100644 index 000000000..beafd37c5 --- /dev/null +++ b/source/l/virtuoso-ose/doinst.sh @@ -0,0 +1,15 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/virtuoso.ini.new + diff --git a/source/l/virtuoso-ose/slack-desc b/source/l/virtuoso-ose/slack-desc new file mode 100644 index 000000000..dd37d0c20 --- /dev/null +++ b/source/l/virtuoso-ose/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +virtuoso-ose: virtuoso-ose (A high-performance object-relational SQL database) +virtuoso-ose: +virtuoso-ose: Virtuoso is a scalable cross-platform server that combines +virtuoso-ose: SQL/RDF/XML Data Management with Web Application Server +virtuoso-ose: and Web Services Platform functionality. +virtuoso-ose: +virtuoso-ose: +virtuoso-ose: +virtuoso-ose: +virtuoso-ose: Homepage: http://virtuoso.openlinksw.com/wiki/main/ +virtuoso-ose: diff --git a/source/l/virtuoso-ose/virtuoso-ose.SlackBuild b/source/l/virtuoso-ose/virtuoso-ose.SlackBuild new file mode 100755 index 000000000..1507719b7 --- /dev/null +++ b/source/l/virtuoso-ose/virtuoso-ose.SlackBuild @@ -0,0 +1,115 @@ +#!/bin/sh + +# Copyright 2009, 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VERSION=${VERSION:-6.1.1} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-virtuoso-ose + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf virtuoso-opensource-$VERSION +tar xvf $CWD/virtuoso-opensource-$VERSION.tar.xz || exit 1 +cd virtuoso-opensource-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +# We disable building of all VADs because Slackware's version of Virtuoso is +# only used as backend for the Soprano/Nepomuk desktop search. +# This saves us a lot of megabytes. +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +LDFLAGS="-L/usr/lib${LIBDIRSUFFIX}" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/virtuoso-ose-$VERSION \ + --with-pthreads \ + --enable-aio \ + --disable-static \ + --disable-all-vads \ + --program-prefix= \ + --program-suffix= \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Do not clobber an existing .ini file: +mkdir -p $PKG/etc +mv $PKG/var/lib/virtuoso/db/virtuoso.ini $PKG/etc/virtuoso.ini.new +ln -sf /etc/virtuoso.ini $PKG/var/lib/virtuoso/db/ + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/virtuoso-ose-$VERSION +cp -a \ + AUTHORS COPYING CREDITS LICENSE NEWS README* \ + $PKG/usr/doc/virtuoso-ose-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/virtuoso-ose-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/vte/vte.SlackBuild b/source/l/vte/vte.SlackBuild index db58daa35..d9aa44c42 100755 --- a/source/l/vte/vte.SlackBuild +++ b/source/l/vte/vte.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,21 @@ PKGNAM=vte -VERSION=${VERSION:-0.20.5} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -107,6 +119,14 @@ cp -a \ $PKG/usr/doc/${PKGNAM}-$VERSION ln -s /usr/share/gtk-doc/html/vte $PKG/usr/doc/vte-$VERSION/html +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/wv2/wv2.SlackBuild b/source/l/wv2/wv2.SlackBuild index 3b46bde38..79d04b50a 100755 --- a/source/l/wv2/wv2.SlackBuild +++ b/source/l/wv2/wv2.SlackBuild @@ -20,10 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.2.3 -ARCH=${ARCH:-x86_64} +VERSION=0.4.2 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -35,6 +44,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -45,7 +57,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf wv2-$VERSION -tar xvf $CWD/wv2-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/wv2-$VERSION.tar.?z* || exit 1 cd wv2-$VERSION chown -R root:root . find . \ @@ -54,19 +66,21 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --disable-debug \ - --disable-static \ - --program-prefix="" \ - --program-suffix="" \ - $ARCH-slackware-linux - -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 +mkdir -p build +cd build + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_BUILD_TYPE=Release \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/n/alpine/alpine.SlackBuild b/source/n/alpine/alpine.SlackBuild index 6ed64d10d..1dd64e6a6 100755 --- a/source/n/alpine/alpine.SlackBuild +++ b/source/n/alpine/alpine.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,12 +23,22 @@ PKGNAM=alpine VERSION=${VERSION:-2.00} -ARCH=${ARCH:-x86_64} -ALPINEBUILD=${ALPINEBUILD:-2} +ALPINEBUILD=${ALPINEBUILD:-3} IMAPDBUILD=${IMAPDBUILD:-2} PINEPGP=${PINEPGP:-0.18.0} -NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +# There are reports that > 1 won't work here: +NUMJOBS=${NUMJOBS:-" -j1 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -86,11 +96,6 @@ zcat $CWD/alpine.tech-notes.txt.diff.gz | patch -p1 --verbose || exit 1 # Build and install: # Since we build non-compliant to RFC3501 we have to answer 'y' half-way: -echo y | make $NUMJOBS EXTRACFLAGS="-fPIC" SSLTYPE=unix -echo y | make $NUMJOBS EXTRACFLAGS="-fPIC" SSLTYPE=unix -echo y | make $NUMJOBS EXTRACFLAGS="-fPIC" SSLTYPE=unix -echo y | make $NUMJOBS EXTRACFLAGS="-fPIC" SSLTYPE=unix -echo y | make $NUMJOBS EXTRACFLAGS="-fPIC" SSLTYPE=unix echo y | make $NUMJOBS EXTRACFLAGS="-fPIC" SSLTYPE=unix || exit 1 make install SSLTYPE=unix DESTDIR=$PKG || exit 1 diff --git a/source/n/autofs/autofs-3.1.7.diff b/source/n/autofs/autofs-3.1.7.diff deleted file mode 100644 index 7849eae95..000000000 --- a/source/n/autofs/autofs-3.1.7.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./modules/lookup_program.c.orig Sat Mar 24 14:16:45 2001 -+++ ./modules/lookup_program.c Sat Mar 24 14:18:18 2001 -@@ -16,7 +16,7 @@ - - #include <ctype.h> - #include <errno.h> --#include <limits.h> -+#include <linux/limits.h> - #include <malloc.h> - #include <stdio.h> - #include <string.h> diff --git a/source/n/autofs/autofs-3.1.7.tar.bz2.sign b/source/n/autofs/autofs-3.1.7.tar.bz2.sign deleted file mode 100644 index 8f80176b7..000000000 --- a/source/n/autofs/autofs-3.1.7.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.0.4 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQA6A7VZyGugalF9Dw4RAkieAJ96c+Si+lGnoSf0OJCanmwE7dilBwCgieKQ -SshwUTt1sSA9Iu3meWUm2yk= -=1kDE ------END PGP SIGNATURE----- diff --git a/source/n/autofs/autofs-5.0.5-fix-libxml2-workaround-configure.patch b/source/n/autofs/autofs-5.0.5-fix-libxml2-workaround-configure.patch new file mode 100644 index 000000000..197ac6bd3 --- /dev/null +++ b/source/n/autofs/autofs-5.0.5-fix-libxml2-workaround-configure.patch @@ -0,0 +1,61 @@ +autofs-5.0.5 - fix libxml2 workaround configure + +From: Ian Kent <raven@themaw.net> + +The configure logic related to work around the libxml2 library +reload issues is not quite right. The xml code is needed if +ldap is used so it is sufficient to require inclusion of the +workaround code if autofs is being built with LDAP support. +--- + +diff --git a/daemon/Makefile b/daemon/Makefile +index 371ec72..9e9d635 100644 +--- a/daemon/Makefile ++++ b/daemon/Makefile +@@ -23,10 +23,8 @@ LDFLAGS += -rdynamic + LIBS = -ldl + + ifeq ($(LDAP), 1) +- ifeq ($(SASL), 1) + CFLAGS += $(XML_FLAGS) + LIBS += $(XML_LIBS) +- endif + endif + + all: automount +diff --git a/daemon/automount.c b/daemon/automount.c +index 979ecd6..7c44d4b 100644 +--- a/daemon/automount.c ++++ b/daemon/automount.c +@@ -38,10 +38,12 @@ + #include <sys/utsname.h> + + #include "automount.h" +-#ifdef LIBXML2_WORKAROUND ++#if defined(LIBXML2_WORKAROUND) || defined(TIRPC_WORKAROUND) + #include <dlfcn.h> ++#ifdef WITH_LDAP + #include <libxml/parser.h> + #endif ++#endif + + const char *program; /* Initialized with argv[0] */ + const char *version = VERSION_STRING; /* Program version */ +@@ -2110,7 +2112,7 @@ int main(int argc, char *argv[]) + exit(1); + } + +-#ifdef LIBXML2_WORKAROUND ++#if defined(WITH_LDAP) && defined(LIBXML2_WORKAROUND) + void *dh_xml2 = dlopen("libxml2.so", RTLD_NOW); + if (!dh_xml2) + dh_xml2 = dlopen("libxml2.so.2", RTLD_NOW); +@@ -2158,7 +2160,7 @@ int main(int argc, char *argv[]) + if (dh_tirpc) + dlclose(dh_tirpc); + #endif +-#ifdef LIBXML2_WORKAROUND ++#if defined(WITH_LDAP) && defined( LIBXML2_WORKAROUND) + if (dh_xml2) { + xmlCleanupParser(); + dlclose(dh_xml2); diff --git a/source/n/autofs/autofs.SlackBuild b/source/n/autofs/autofs.SlackBuild index 8886f3f1e..7fb29caeb 100755 --- a/source/n/autofs/autofs.SlackBuild +++ b/source/n/autofs/autofs.SlackBuild @@ -1,6 +1,7 @@ + #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,34 +22,49 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.1.7 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=autofs +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} -if [ "$ARCH" = "x86_64" ]; then +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" else + SLKCFLAGS="-O2" LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-autofs +PKG=$TMP/package-$PKGNAM rm -rf $PKG -mkdir -p $TMP $PKG/usr/{sbin,man/man{5,8}} +mkdir -p $TMP $PKG cd $TMP -tar xvf $CWD/autofs-$VERSION.tar.bz2 || exit 1 -cd autofs-$VERSION || exit 1 -zcat $CWD/autofs-$VERSION.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -# Allow x86_64 arch: -zcat $CWD/autofs.x86_64.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -# Compensate for modern compiler requirements: -zcat $CWD/autofs.gcc.fix.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -sed -i -e "s/OPEN_MAX/NR_OPEN/" $(grep -lr OPEN_MAX *) +rm -rf $PKGNAM-$VERSION +tar xf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 +zcat $CWD/autofs-5.0.5-fix-libxml2-workaround-configure.patch.gz | patch -p1 || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -56,22 +72,54 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# SASL requires krb5: + +CFLAGS="$SLKCFLAGS" \ +CPPFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --mandir=/usr/man \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --with-openldap \ + --without-sasl \ --build=$ARCH-slackware-linux -make || exit 1 +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 -make install INSTALLROOT=$PKG || exit 1 +mv $PKG/etc/init.d $PKG/etc/rc.d +mv $PKG/etc/rc.d/autofs $PKG/etc/rc.d/rc.autofs.new +chmod 644 $PKG/etc/rc.d/rc.autofs.new -strip $PKG/usr/sbin/* -gzip -9 $PKG/usr/man/man*/* +# Prep the config files: +( cd $PKG/etc + for file in auto.master auto.misc autofs_ldap_auth.conf default/autofs ; do + mv $file ${file}.new + done +) + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi mkdir -p $PKG/usr/doc/autofs-$VERSION cp -a \ - COPYING COPYRIGHT NEWS README README.options TODO \ - multiserver_mount.patch samples \ + COPYING* COPYRIGHT CREDITS INSTALL README* \ + samples \ $PKG/usr/doc/autofs-$VERSION ( cd $PKG/usr/doc/autofs-$VERSION find . \( -name Makefile -o -name *.in \) -exec rm -f {} \; @@ -79,10 +127,18 @@ cp -a \ find . -type f -exec chmod 644 {} \; ) +# If there's a CHANGELOG, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGELOG ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGELOG | head -n 1000 > $DOCSDIR/CHANGELOG + touch -r CHANGELOG $DOCSDIR/CHANGELOG +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh -# Build the package: cd $PKG /sbin/makepkg -l y -c n $TMP/autofs-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/autofs/autofs.gcc.fix.diff b/source/n/autofs/autofs.gcc.fix.diff deleted file mode 100644 index 8b30019f7..000000000 --- a/source/n/autofs/autofs.gcc.fix.diff +++ /dev/null @@ -1,12 +0,0 @@ -diff -Naur autofs-3.1.7/modules/lookup_file.c autofs-3.1.7-gcc/modules/lookup_file.c ---- autofs-3.1.7/modules/lookup_file.c 2000-11-04 07:05:17.000000000 +0000 -+++ autofs-3.1.7-gcc/modules/lookup_file.c 2006-08-16 18:21:21.000000000 +0100 -@@ -197,7 +197,7 @@ - } - break; - } -- next_char: /* End of loop, since we can't continue; -+ next_char:; /* End of loop, since we can't continue; - inside a switch */ - } - diff --git a/source/n/autofs/autofs.x86_64.diff b/source/n/autofs/autofs.x86_64.diff deleted file mode 100644 index 8c4bf677c..000000000 --- a/source/n/autofs/autofs.x86_64.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- autofs-3.1.7/include/linux/auto_fs.h 2000-11-04 07:05:18.000000000 +0000 -+++ auto_fs.h 2006-10-19 13:46:21.000000000 +0000 -@@ -45,7 +45,7 @@ - * If so, 32-bit user-space code should be backwards compatible. - */ - --#if defined(__sparc__) || defined(__mips__) -+#if defined(__sparc__) || defined(__mips__) || defined(__s390__) || defined(__x86_64__) - typedef unsigned int autofs_wqt_t; - #else - typedef unsigned long autofs_wqt_t; diff --git a/source/n/autofs/doinst.sh b/source/n/autofs/doinst.sh new file mode 100644 index 000000000..0b0d80309 --- /dev/null +++ b/source/n/autofs/doinst.sh @@ -0,0 +1,26 @@ +config() { + NEW="$1" + OLD="`dirname $NEW`/`basename $NEW .new`" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +# Keep same perms on rc.autofs.new: +if [ -e etc/rc.d/rc.autofs ]; then + cp -a etc/rc.d/rc.autofs etc/rc.d/rc.autofs.new.incoming + cat etc/rc.d/rc.autofs.new > etc/rc.d/rc.autofs.new.incoming + mv etc/rc.d/rc.autofs.new.incoming etc/rc.d/rc.autofs.new +fi + +config etc/auto.master.new +config etc/auto.misc.new +config etc/autofs_ldap_auth.conf.new +config etc/default/autofs.new + +config etc/rc.d/rc.autofs.new + diff --git a/source/n/bind/bind.SlackBuild b/source/n/bind/bind.SlackBuild index afcde9e1b..73b7d2ff2 100755 --- a/source/n/bind/bind.SlackBuild +++ b/source/n/bind/bind.SlackBuild @@ -22,11 +22,19 @@ PKGNAM=bind -VERSION=${VERSION:-9.4.3-P3} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-9.4.3-P4} NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=/bind-$(mcookie) diff --git a/source/n/bluez-hcidump/bluez-hcidump.SlackBuild b/source/n/bluez-hcidump/bluez-hcidump.SlackBuild index 0bef3fb99..ac2a8442c 100755 --- a/source/n/bluez-hcidump/bluez-hcidump.SlackBuild +++ b/source/n/bluez-hcidump/bluez-hcidump.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,17 +23,32 @@ PKGNAM=bluez-hcidump VERSION=${VERSION:-1.42} -ARCH=${ARCH:-x86_64} +BUILD=${BUILD:-3} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -55,6 +70,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Patch to build with bluez+>4.61 +zcat $CWD/hci.c_for_bluez-4.61.patch.gz | patch -p1 || exit 1 + # Configure: CFLAGS="$SLKCFLAGS" \ ./configure \ @@ -98,9 +116,17 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING ChangeLog INSTALL NEWS README \ + AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install #zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/n/bluez-hcidump/hci.c_for_bluez-4.61.patch b/source/n/bluez-hcidump/hci.c_for_bluez-4.61.patch new file mode 100644 index 000000000..bcd6b4a0a --- /dev/null +++ b/source/n/bluez-hcidump/hci.c_for_bluez-4.61.patch @@ -0,0 +1,21 @@ +diff -Nur bluez-hcidump-1.42.orig//parser/hci.c bluez-hcidump-1.42/parser/hci.c +--- bluez-hcidump-1.42.orig//parser/hci.c 2008-06-15 07:46:13.000000000 -0500 ++++ bluez-hcidump-1.42/parser/hci.c 2010-03-02 23:15:35.171713301 -0600 +@@ -1973,7 +1973,7 @@ + + static inline void read_inquiry_transmit_power_level_dump(int level, struct frame *frm) + { +- read_inquiry_transmit_power_level_rp *rp = frm->ptr; ++ read_inq_response_tx_power_level_rp *rp = frm->ptr; + + p_indent(level, frm); + printf("status 0x%2.2x level %d\n", rp->status, rp->level); +@@ -2325,7 +2325,7 @@ + case OCF_READ_EXT_INQUIRY_RESPONSE: + read_ext_inquiry_response_dump(level, frm); + return; +- case OCF_READ_INQUIRY_TRANSMIT_POWER_LEVEL: ++ case OCF_READ_INQ_RESPONSE_TX_POWER_LEVEL: + read_inquiry_transmit_power_level_dump(level, frm); + return; + case OCF_READ_DEFAULT_ERROR_DATA_REPORTING: diff --git a/source/n/bluez-hcidump/slack-desc b/source/n/bluez-hcidump/slack-desc index e4c8205c2..591118373 100644 --- a/source/n/bluez-hcidump/slack-desc +++ b/source/n/bluez-hcidump/slack-desc @@ -6,10 +6,10 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -bluez-hcidump: bluez-hcidump (Linux Bluetooth(TM) analyzer) +bluez-hcidump: bluez-hcidump (Bluetooth analyzer) bluez-hcidump: -bluez-hcidump: The bluez-hcidump package contains a network analyzer for -bluez-hcidump: Bluetooth(TM). The hcidump utility reads raw HCI data coming from and +bluez-hcidump: The bluez-hcidump package contains a network analyzer for Bluetooth. +bluez-hcidump: This utility (hcidump) utility reads raw HCI data coming from and bluez-hcidump: going to a Bluetooth device and prints commands, events and data. bluez-hcidump: bluez-hcidump: For more info, visit: http://www.bluez.org diff --git a/source/n/bluez-utils/60-bluetooth.rules b/source/n/bluez-utils/60-bluetooth.rules deleted file mode 100644 index 0957225fd..000000000 --- a/source/n/bluez-utils/60-bluetooth.rules +++ /dev/null @@ -1,35 +0,0 @@ -# Brain Boxes BL-620 Bluetooth Adapter -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="Brain Boxes", SYSFS{prod_id2}=="Bluetooth PC Card", ENV{HCIOPTS}="bboxes", RUN+="bluetooth_serial" - -# Xircom CreditCard Bluetooth Adapter -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="Xircom", SYSFS{prod_id3}=="CBT", ENV{HCIOPTS}="xircom", RUN+="bluetooth_serial" - -# Xircom RealPort2 Bluetooth Adapter -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="Xircom", SYSFS{prod_id3}=="CBT", ENV{HCIOPTS}="xircom", RUN+="bluetooth_serial" - -# IBM Bluetooth PC Card II -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="IBM", SYSFS{prod_id2}=="Bluetooth PC Card II", ENV{HCIOPTS}="tdk", RUN+="bluetooth_serial" - -# TDK Bluetooth PC Card -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="TDK", SYSFS{prod_id2}=="Bluetooth PC Card II", ENV{HCIOPTS}="tdk", RUN+="bluetooth_serial" - -# AmbiCom BT2000C Bluetooth PC/CF Card -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="AmbiCom BT2000C", SYSFS{prod_id2}=="Bluetooth PC/CF Card", ENV{HCIOPTS}="bt2000c", RUN+="bluetooth_serial" - -# COM One Platinium Bluetooth PC Card -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="COM1 SA", SYSFS{prod_id2}=="MC310 CARD", ENV{HCIOPTS}="comone", RUN+="bluetooth_serial" - -# Sphinx PICO Card -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="SPHINX", SYSFS{prod_id2}=="BT-CARD", ENV{HCIOPTS}="picocard", RUN+="bluetooth_serial" - -# H-Soft blue+Card -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="H-Soft", SYSFS{prod_id2}=="Blue+CARD", ENV{HCIOPTS}="$sysfs{manf_id},$sysfs{card_id}", RUN+="bluetooth_serial" - -# Compaq iPAQ Bluetooth Sleeve, Belkin F8T020, any other muppet who used an OXCF950 and didn't bother to program it appropriately. -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="CF CARD", SYSFS{prod_id2}=="GENERIC", ENV{HCIOPTS}="$sysfs{manf_id},$sysfs{card_id}", RUN+="bluetooth_serial" - -# Zoom Bluetooth Card and Sitecom CN-504 Card -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="PCMCIA", SYSFS{prod_id2}=="Bluetooth Card", ENV{HCIOPTS}="zoom", RUN+="bluetooth_serial" - -# CC&C BT0100M -SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="Bluetooth BT0100M", ENV{HCIOPTS}="bcsp 115200", RUN+="bluetooth_serial" diff --git a/source/n/bluez-utils/README.SLACKWARE b/source/n/bluez-utils/README.SLACKWARE deleted file mode 100644 index 795c8c5a2..000000000 --- a/source/n/bluez-utils/README.SLACKWARE +++ /dev/null @@ -1,18 +0,0 @@ -PIN (or passkey) management ---------------------------- -since bluez 3.0 the old pin_helper script has been replaced by -the dbus interface. To add a default passkey for every outgoing -request (e.g. the old /etc/bluetooth/pin file) drop it into -/etc/bluetooth/passkeys/default. (e.g. echo -n "1234" > -/etc/bluetooth/passkeys/default ) -To add a passkey for a specific outgoing connection replace default -with the device's address. ( /etc/bluetooth/passkeys/aa:bb:cc:dd:ee:ff -will contain passkey for aa:bb:cc:dd:ee:ff ). -After adding a passkey you should restart bluetooth with - -/etc/init.d/bluetooth restart - -and the new passkeys will be registered. - - -(This behaviour has been copied from Debian) diff --git a/source/n/bluez-utils/bluetooth.conf b/source/n/bluez-utils/bluetooth.conf deleted file mode 100644 index c0476237a..000000000 --- a/source/n/bluez-utils/bluetooth.conf +++ /dev/null @@ -1,24 +0,0 @@ -<!-- This configuration file specifies the required security policies - for Bluetooth core daemon to work. --> - -<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN" - "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd"> -<busconfig> - - <!-- ../system.conf have denied everything, so we just punch some holes --> - - <policy user="root"> - <allow own="org.bluez"/> - <allow send_destination="org.bluez"/> - <allow send_interface="org.bluez.Agent"/> - </policy> - - <policy at_console="true"> - <allow send_destination="org.bluez"/> - </policy> - - <policy context="default"> - <deny send_destination="org.bluez"/> - </policy> - -</busconfig> diff --git a/source/n/bluez-utils/bluez-utils.SlackBuild b/source/n/bluez-utils/bluez-utils.SlackBuild deleted file mode 100755 index 7f8b95746..000000000 --- a/source/n/bluez-utils/bluez-utils.SlackBuild +++ /dev/null @@ -1,188 +0,0 @@ -#!/bin/sh -# -# SlackBuild for bluez-utils -# http://www.bluez.org -# By SukkoPera <enjoy.the.silence@iol.it> -# Thanks a lot to CAT for his Slackware package cration -# guide (http://www.slacky.it/misto/tutorial/spunleashed.txt) -# -# Check out -# - http://www.sukkopera.tk -# - http://www.slacky.it -# - http://www.nyft.org -# -# Notes: -# - Many files and the whole PIN management system have been stolen from the -# Debian package. Thanks. -# -# Rewritten for Slackware 2007-05 <pjv> - -NAME=bluez-utils -VERSION=${VERSION:-3.36} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-7} - - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$NAME - -rm -rf $PKG -mkdir -p $TMP $PKG -mkdir -p $PKG/etc/rc.d \ - $PKG/etc/bluetooth/passkeys \ - $PKG/usr/lib${LIBDIRSUFFIX}/bluetooth -# Is there any reason for a non-root user to be able to see these? -chmod 700 $PKG/etc/bluetooth/passkeys -cd $TMP -rm -rf $NAME-$VERSION -tar xvf $CWD/${NAME}-${VERSION}.tar.bz2 || exit 1 -cd $NAME-$VERSION - -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --mandir=/usr/man \ - --localstatedir=/var \ - --enable-tools\ - --enable-bccmd \ - --enable-hid2hci \ - --enable-dfutool \ - --enable-hidd \ - --enable-pand \ - --enable-dund \ - --enable-cups \ - --enable-manpages \ - --enable-configfiles \ - --build=$ARCH-slackware-linux - -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG - -mkdir -p $PKG/lib/udev -cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1 -chmod 755 $PKG/lib/udev/bluetooth_serial - -mkdir -p $PKG/lib/udev/rules.d -cp -a scripts/bluetooth.rules $PKG/lib/udev/rules.d/60-bluetooth.rules || exit 1 -chmod 644 $PKG/lib/udev/rules.d/60-bluetooth.rules - -# This appears to be gone/obsolete: -#if [ ! -e $PKG/etc/bluetooth/transfer.service ]; then -# cat transfer/transfer.service > $PKG/etc/bluetooth/transfer.service -#fi -#if [ ! -e $PKG/usr/lib${LIBDIRSUFFIX}/bluetooth/bluetoothd-service-transfer -a -e transfer/bluetoothd-service-transfer ]; then -# cat transfer/bluetoothd-service-transfer > $PKG/usr/lib${LIBDIRSUFFIX}/bluetooth/bluetoothd-service-transfer -# chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/bluetooth/bluetoothd-service-transfer -#fi - -# Install Debian's add-passkey program: -DEBDEST=/usr/lib${LIBDIRSUFFIX}/bluetooth -gcc $(pkg-config --libs --cflags dbus-1) -DDBUS_API_SUBJECT_TO_CHANGE \ - $CWD/add-passkey.c -o $PKG/$DEBDEST/add-passkey || exit 1 -cp $CWD/register-passkeys $PKG/$DEBDEST -if [ "$ARCH" = "x86_64" ]; then - sed -i "s,/usr/lib/,/usr/lib${LIBDIRSUFFIX}/,g" $PKG/$DEBDEST/register-passkeys -fi -chmod a+x $PKG/$DEBDEST/* - -# Default PIN (wow, does this seem insecure!) -#echo "1234" > $PKG/etc/bluetooth/passkeys/default -touch $PKG/etc/bluetooth/passkeys/default - -mkdir -p $PKG/usr/doc/$NAME-$VERSION -cp -a \ - AUTHORS ChangeLog COPYING* INSTALL NEWS README $CWD/README.SLACKWARE \ - $PKG/usr/doc/$NAME-$VERSION -( cd $PKG/etc/bluetooth - ln -sf /usr/doc/$NAME-$VERSION/README.SLACKWARE . -) - -# Arrange init scripts and config files: -CONF=/etc/rc.d/rc.bluetooth.conf -mkdir -p $PKG/etc/rc.d -cp $CWD/rc.bluetooth $PKG/etc/rc.d/rc.bluetooth -if [ "$ARCH" = "x86_64" ]; then - sed -i "s,/usr/lib/,/usr/lib${LIBDIRSUFFIX}/,g" $PKG/etc/rc.d/rc.bluetooth -fi -cp -a $CWD/rc.bluetooth.conf $PKG/etc/rc.d/rc.bluetooth.conf -sed -i "s:\(HIDD_ENABLE=\).*:\1false:" $PKG/$CONF || exit 1 -sed -i "s:\(HID2HCI_ENABLE=\).*:\1false:" $PKG/$CONF || exit 1 - -mkdir -p $PKG/etc/bluetooth -cp -a audio/audio.conf $PKG/etc/bluetooth -cp -a audio/asound.conf $PKG/etc/bluetooth -cp -a input/input.conf $PKG/etc/bluetooth -cp -a hcid/hcid.conf $PKG/etc/bluetooth -cp -a network/network.conf $PKG/etc/bluetooth -cp -a rfcomm/rfcomm.conf $PKG/etc/bluetooth -chmod 644 $PKG/etc/bluetooth/*.conf - -# Do not overwrite configuration -# Well, let the dbus file be overwritten, as it is not usually user-edited. -( cd $PKG - for file in \ - etc/bluetooth/audio.conf \ - etc/asound.conf \ - etc/bluetooth/asound.conf \ - etc/bluetooth/input.conf \ - etc/bluetooth/hcid.conf \ - etc/bluetooth/network.conf \ - etc/bluetooth/rfcomm.conf \ - etc/bluetooth/passkeys/default \ - etc/rc.d/rc.bluetooth \ - etc/rc.d/rc.bluetooth.conf ; do - mv ${file} ${file}.new - done -) - -# Replace the bluetooth.conf file with one from BlueZ4 that works with the newest dbus: -cat $CWD/bluetooth.conf > $PKG/etc/dbus-1/system.d/bluetooth.conf - -# Compress and if needed symlink the man pages: -if [ -d $PKG/usr/man ]; then - ( cd $PKG/usr/man - for manpagedir in $(find . -type d -name "man*") ; do - ( cd $manpagedir - for eachpage in $( find . -type l -maxdepth 1) ; do - ln -s $( readlink $eachpage ).gz $eachpage.gz - rm $eachpage - done - gzip -9 *.? - ) - done - ) -fi - -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh - -cd $PKG -/sbin/makepkg -l y -c n $TMP/$NAME-$VERSION-$ARCH-$BUILD.txz - diff --git a/source/n/bluez-utils/doinst.sh b/source/n/bluez-utils/doinst.sh deleted file mode 100644 index e738d14bd..000000000 --- a/source/n/bluez-utils/doinst.sh +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/sh -config() { - NEW="$1" - OLD="`dirname $NEW`/`basename $NEW .new`" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} -if [ ! -e etc/rc.d/rc.bluetooth -o ! -x etc/rc.d/rc.bluetooth ]; then - chmod 644 etc/rc.d/rc.bluetooth.new -else - chmod 755 etc/rc.d/rc.bluetooth.new -fi -config etc/rc.d/rc.bluetooth.new -config etc/rc.d/rc.bluetooth.conf.new -config etc/bluetooth/asound.conf.new -config etc/bluetooth/audio.conf.new -config etc/bluetooth/hcid.conf.new -config etc/bluetooth/input.conf.new -config etc/bluetooth/network.conf.new -config etc/bluetooth/rfcomm.conf.new -config etc/bluetooth/passkeys/default.new - -if [ ! -e etc/asound.conf ]; then - ( cd etc ; ln -sf bluetooth/asound.conf . ) -fi diff --git a/source/n/bluez-utils/rc.bluetooth b/source/n/bluez-utils/rc.bluetooth deleted file mode 100644 index cf891dcf9..000000000 --- a/source/n/bluez-utils/rc.bluetooth +++ /dev/null @@ -1,114 +0,0 @@ -#!/bin/sh -# -# Start/stop the Bluetooth daemons -# -# This version has been modified by SukkoPera, taking inspiration from then -# Debian init script, to add support for register-passkeys. Modified by -# Patrick Volkerding to add "restart" support, and cleaned up a tiny bit. - -set -e - -PATH=/sbin:/bin:/usr/sbin:/usr/bin -DESC="Bluetooth subsystem" - -# The register-passkeys script was originally written by Debian: -REGISTER_PASSKEYS=/usr/lib/bluetooth/register-passkeys - -HCID_NAME=hcid -HIDD_NAME=hidd -HID2HCI_NAME=hid2hci -RFCOMM_NAME=rfcomm -PAND_NAME=pand -DUND_NAME=dund - -HCID_EXEC="`which $HCID_NAME || true`" -HIDD_EXEC="`which $HIDD_NAME || true`" -HID2HCI_EXEC="`which $HID2HCI_NAME || true`" -RFCOMM_EXEC="`which $RFCOMM_NAME || true`" -PAND_EXEC="`which $PAND_NAME || true`" -DUND_EXEC="`which $DUND_NAME || true`" - -HCID_CONFIG="/etc/bluetooth/hcid.conf" -RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf" - -# Source rc.bluetooth.conf -. /etc/rc.d/rc.bluetooth.conf - -bluetooth_start() { - echo -n "Starting $DESC: " - if [ -x "$HIDD_EXEC" ] ; then - if $HIDD_ENABLE && [ -x "$HIDD_EXEC" -a -n "$HIDD_OPTIONS" ] ; then - $HIDD_EXEC $HIDD_OPTIONS || true - echo -n " $HIDD_NAME" - fi - else - echo "BlueZ does not appear to be installed!" - exit - fi - # Separate sdp daemon is depreciated, now internal function. - if $SDPD_ENABLE ; then - $HCID_EXEC -s -f $HCID_CONFIG - echo -n " $HCID_NAME sdp" - else - $HCID_EXEC -f $HCID_CONFIG - echo -n " $HCID_NAME" - fi - if $HID2HCI_ENABLE && [ -x "$HID2HCI_EXEC" ] ; then - $HID2HCI_EXEC --tohci > /dev/null 2>&1 || true - echo -n " $HID2HCI_NAME" - fi - if $RFCOMM_ENABLE && [ -x "$RFCOMM_EXEC" -a -f "$RFCOMM_CONFIG" ] ; then - $RFCOMM_EXEC -f $RFCOMM_CONFIG bind all || true - echo -n " $RFCOMM_NAME" - fi - if $DUND_ENABLE && [ -x "$DUND_EXEC" -a -n "$DUND_OPTIONS" ] ; then - $DUND_EXEC $DUND_OPTIONS - echo -n " $DUND_NAME" - fi - if $PAND_ENABLE && [ -x "$PAND_EXEC" -a -n "$PAND_OPTIONS" ] ; then - $PAND_EXEC $PAND_OPTIONS - echo -n " $PAND_NAME" - fi - if [ -x $REGISTER_PASSKEYS ]; then - $REGISTER_PASSKEYS - echo -n " passkeys" - fi - echo "." -} - -bluetooth_stop() { - echo -n "Stopping $DESC: " - killall $PAND_NAME > /dev/null 2>&1 || true - echo -n " $PAND_NAME" - killall $DUND_NAME > /dev/null 2>&1 || true - echo -n " $DUND_NAME" - if [ -x "$RFCOMM_EXEC" ] ; then - $RFCOMM_EXEC release all > /dev/null 2>&1 || true - echo -n " $RFCOMM_NAME" - fi - killall $HIDD_NAME > /dev/null 2>&1 || true - echo -n " $HIDD_NAME" - killall $HCID_NAME > /dev/null 2>&1 || true - echo -n " $HCID_NAME" - echo "." -} - -case "$1" in - start) - bluetooth_start - ;; - stop) - bluetooth_stop - ;; - restart) - bluetooth_stop - sleep 1 - bluetooth_start - ;; - *) - echo "Usage: $0 start|stop|restart" >&2 - exit 1 - ;; -esac - -exit 0 diff --git a/source/n/bluez-utils/rc.bluetooth.conf b/source/n/bluez-utils/rc.bluetooth.conf deleted file mode 100644 index 09df405fb..000000000 --- a/source/n/bluez-utils/rc.bluetooth.conf +++ /dev/null @@ -1,33 +0,0 @@ -# /etc/rc.d/rc.bluetooth.conf -# -# This file contains the configuration for the Bluetooth subsystem, BlueZ. - -# The lines below allow you to configure which BlueZ daemons will be started, -# along with any daemon-specific options. - -# Allowed values for each (unless otherwise noted) are "true" and "false" - -# ============================================================================= - -# The SDP daemon allows clients to detect supported Bluetooth services -SDPD_ENABLE=true - -# The HID daemon supports Bluetooth Human Interface Devices -HIDD_ENABLE=false -HIDD_OPTIONS="--server" - -# This switches your Bluetooth device into HCI mode, use this if your input -# device does not support Bluetooth HID -HID2HCI_ENABLE=false - -# The RFCOMM daemon is used to simulate serial connections over Bluetooth -RFCOMM_ENABLE=true - -# The DUN daemon is used for Dial Up Networking over Bluetooth -DUND_ENABLE=false -DUND_OPTIONS="--listen --persist --msdun call dun" - -# The PAN daemon is used to setup a Bluetooth network. -PAND_ENABLE=false -PAND_OPTIONS="--listen --role NAP" - diff --git a/source/n/bluez-utils/register-passkeys b/source/n/bluez-utils/register-passkeys deleted file mode 100644 index f57042c3c..000000000 --- a/source/n/bluez-utils/register-passkeys +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/bash -# register every passkey found in $PASSKEYS_DIR - -PASSKEYS_DIR="/etc/bluetooth/passkeys/" -PASSKEY_AGENT="/usr/lib/bluetooth/add-passkey" - -cd $PASSKEYS_DIR - -for f in $(ls -1 ${PASSKEYS_DIR}); do - if [ ! -r "$f" ]; then continue; fi - - # default passkey - if [ "$f" == "default" ]; then - cat "$f" | $PASSKEY_AGENT --default > /dev/null 2>&1 & - # specific passkey - elif echo "$f" | egrep -q '([0-9a-fA-F]{1,2}:){5}[0-9a-fA-F]{1,2}'; then - cat "$f" | $PASSKEY_AGENT "$f" > /dev/null 2>&1 & - fi -done diff --git a/source/n/bluez/bluez.SlackBuild b/source/n/bluez/bluez.SlackBuild new file mode 100755 index 000000000..ec5cba262 --- /dev/null +++ b/source/n/bluez/bluez.SlackBuild @@ -0,0 +1,196 @@ +#!/bin/sh + +# Slackware build script for bluez-utils - http://www.bluez.org + +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=bluez +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/${PKGNAM}-${VERSION}.tar.?z* || exit 1 +cd $PKGNAM-$VERSION + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Fixup the dbus config file for our usage: +zcat $CWD/patches/bluez-dbus-config.patch.gz | patch -p1 --verbose || exit 1 + +# Use a wrapper to check rc.bluetooth mode before starting bluetoothd +zcat $CWD/patches/bluez-run_udev_helper.patch.gz | patch -p1 --verbose || exit 1 + +# Unbreak a Dell USB mouse +# https://bugzilla.novell.com/show_bug.cgi?id=522287 +# https://bugzilla.redhat.com/show_bug.cgi?id=517088 +zcat $CWD/patches/bluez-unbreak_dell_mouse.patch.gz | patch -p1 --verbose || exit 1 + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --localstatedir=/var \ + --enable-gstreamer \ + --enable-alsa \ + --enable-usb \ + --enable-netlink \ + --enable-tools\ + --enable-bccmd \ + --enable-hid2hci \ + --enable-dfutool \ + --enable-hidd \ + --enable-pand \ + --enable-dund \ + --enable-cups \ + --enable-service \ + --enable-udevrules \ + --enable-configfiles \ + --disable-silent-rules \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +# I'm don't think we need this, but I'll leave it commented just in case: +# http://bugs.archlinux.org/task/4930 +# The dbus-1 and bluetooth linkages are obvious, but I had to get the rt and +# pthread ones from the old bluez-utils (VERSION=3.36) tests/Makefile +#gcc $SLKCFLAGS $(pkg-config --cflags dbus-1) -DVERSION=3.36 \ +# -L$(pwd)/lib/.libs -ldbus-1 -lbluetooth -lpthread -lrt \ +# $CWD/passkey-agent.c -o $PKG/usr/bin/passkey-agent || exit 1 + +cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1 +chmod 0755 $PKG/lib/udev/bluetooth_serial + +cat $CWD/config/bluetooth.sh > $PKG/lib/udev/bluetooth.sh +chmod 0755 $PKG/lib/udev/bluetooth.sh + +# SuSE says this is safe... :-) +mkdir -p $PKG/etc/modprobe.d +cat $CWD/config/bluetooth.modprobe > $PKG/etc/modprobe.d/bluetooth.conf + +mkdir -p $PKG/etc/bluetooth +cp -a audio/audio.conf $PKG/etc/bluetooth +cp -a input/input.conf $PKG/etc/bluetooth +cp -a network/network.conf $PKG/etc/bluetooth +cp -a serial/serial.conf $PKG/etc/bluetooth +cp -a tools/rfcomm.conf $PKG/etc/bluetooth +chmod 644 $PKG/etc/bluetooth/*.conf + +# Do not overwrite configuration +# Well, let the dbus file be overwritten, as it is not usually user-edited. +( cd $PKG + for file in \ + etc/alsa/bluetooth.conf \ + etc/bluetooth/audio.conf \ + etc/bluetooth/input.conf \ + etc/bluetooth/network.conf \ + etc/bluetooth/serial.conf \ + etc/bluetooth/rfcomm.conf \ + etc/bluetooth/main.conf \ + etc/modprobe.d/bluetooth.conf ; do + mv ${file} ${file}.new + done +) + +# Add an init script +mkdir -p $PKG/etc/rc.d +cat $CWD/config/rc.bluetooth > $PKG/etc/rc.d/rc.bluetooth.new + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING* INSTALL NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/n/bluez/config/bluetooth.modprobe b/source/n/bluez/config/bluetooth.modprobe new file mode 100644 index 000000000..3072d7885 --- /dev/null +++ b/source/n/bluez/config/bluetooth.modprobe @@ -0,0 +1,3 @@ +# use "reset=1" as default, since it should be safe for recent devices and +# solves all kind of problems. +options btusb reset=1 diff --git a/source/n/bluez/config/bluetooth.sh b/source/n/bluez/config/bluetooth.sh new file mode 100644 index 000000000..22034551c --- /dev/null +++ b/source/n/bluez/config/bluetooth.sh @@ -0,0 +1,7 @@ +#!/bin/sh + +# Check whether /etc/rc.d/rc.bluetooth is executable before starting +# the bluetooth subsystem for hotplugged bluetooth devices +[ -x /etc/rc.d/rc.bluetooth ] && exec /usr/sbin/bluetoothd --udev +exit 0 + diff --git a/source/n/bluez/config/rc.bluetooth b/source/n/bluez/config/rc.bluetooth new file mode 100644 index 000000000..12540d833 --- /dev/null +++ b/source/n/bluez/config/rc.bluetooth @@ -0,0 +1,30 @@ +#!/bin/sh + +bluez_start() { + # bluetoothd requires dbus, but dbus isn't started early enough during + # system boot, so we have to re-trigger the events now + udevadm trigger --subsystem-match=bluetooth --action=add +} + +bluez_stop() { + pkill -TERM bluetoothd 1>/dev/null 2>/dev/null +} + +case "$1" in + start) + bluez_start + ;; + stop) + bluez_stop + ;; + restart) + bluez_stop + sleep 1 + bluez_start + ;; + *) + printf "Usage: $N {start|stop|restart}\n" + exit 1 + ;; +esac + diff --git a/source/n/bluez/doinst.sh b/source/n/bluez/doinst.sh new file mode 100644 index 000000000..1711435e0 --- /dev/null +++ b/source/n/bluez/doinst.sh @@ -0,0 +1,29 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +# Keep same perms on rc.bluetooth.new: +if [ -e etc/rc.d/rc.bluetooth ]; then + cp -a etc/rc.d/rc.bluetooth etc/rc.d/rc.bluetooth.new.incoming + cat etc/rc.d/rc.bluetooth.new > etc/rc.d/rc.bluetooth.new.incoming + mv etc/rc.d/rc.bluetooth.new.incoming etc/rc.d/rc.bluetooth.new +fi + +config etc/alsa/bluetooth.conf.new +config etc/rc.d/rc.bluetooth.new +config etc/bluetooth/audio.conf.new +config etc/bluetooth/input.conf.new +config etc/bluetooth/main.conf.new +config etc/bluetooth/network.conf.new +config etc/bluetooth/serial.conf.new +config etc/bluetooth/rfcomm.conf.new +config etc/modprobe.d/bluetooth.conf.new + diff --git a/source/n/bluez-utils/add-passkey.c b/source/n/bluez/passkey-agent.c index b9dcbb517..8ac91d27d 100644 --- a/source/n/bluez-utils/add-passkey.c +++ b/source/n/bluez/passkey-agent.c @@ -1,11 +1,8 @@ /* - * add-passkey.c: - * registers as an agent for the bluez bluetooth linux stack, the code is - * shamelessly stolen from bluez source found at http://bluez.sf.net * * BlueZ - Bluetooth protocol stack for Linux * - * Copyright (C) 2005-2006 Marcel Holtmann <marcel@holtmann.org> + * Copyright (C) 2004-2008 Marcel Holtmann <marcel@holtmann.org> * * * This program is free software; you can redistribute it and/or modify @@ -40,12 +37,11 @@ #define INTERFACE "org.bluez.Security" -// FIXME assumption -#define PASSKEYMAXLENGTH 255 - static char *passkey = NULL; static char *address = NULL; +static int do_reject = 0; + static volatile sig_atomic_t __io_canceled = 0; static volatile sig_atomic_t __io_terminated = 0; @@ -70,6 +66,7 @@ static DBusHandlerResult agent_filter(DBusConnection *conn, } if (!strcmp(name, "org.bluez") && *new == '\0') { + fprintf(stderr, "Passkey service has been terminated\n"); __io_terminated = 1; } @@ -81,25 +78,36 @@ static DBusHandlerResult request_message(DBusConnection *conn, { DBusMessage *reply; const char *path, *address; + dbus_bool_t numeric; if (!passkey) return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; - if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_STRING, &path, - DBUS_TYPE_STRING, &address, DBUS_TYPE_INVALID)) { + if (!dbus_message_get_args(msg, NULL, + DBUS_TYPE_STRING, &path, DBUS_TYPE_STRING, &address, + DBUS_TYPE_BOOLEAN, &numeric, DBUS_TYPE_INVALID)) { fprintf(stderr, "Invalid arguments for passkey Request method"); return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; } + if (do_reject) { + reply = dbus_message_new_error(msg, + "org.bluez.Error.Rejected", ""); + goto send; + } + reply = dbus_message_new_method_return(msg); if (!reply) { fprintf(stderr, "Can't create reply message\n"); - return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; + return DBUS_HANDLER_RESULT_NEED_MEMORY; } + printf("Passkey request for device %s\n", address); + dbus_message_append_args(reply, DBUS_TYPE_STRING, &passkey, DBUS_TYPE_INVALID); +send: dbus_connection_send(conn, reply, NULL); dbus_connection_flush(conn); @@ -109,35 +117,63 @@ static DBusHandlerResult request_message(DBusConnection *conn, return DBUS_HANDLER_RESULT_HANDLED; } -static DBusHandlerResult release_message(DBusConnection *conn, +static DBusHandlerResult cancel_message(DBusConnection *conn, DBusMessage *msg, void *data) { DBusMessage *reply; + const char *path, *address; - if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_INVALID)) { - fprintf(stderr, "Invalid arguments for passkey Release method"); + if (!dbus_message_get_args(msg, NULL, + DBUS_TYPE_STRING, &path, DBUS_TYPE_STRING, &address, + DBUS_TYPE_INVALID)) { + fprintf(stderr, "Invalid arguments for passkey Confirm method"); return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; } + printf("Request canceled for device %s\n", address); + reply = dbus_message_new_method_return(msg); if (!reply) { fprintf(stderr, "Can't create reply message\n"); - return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; + return DBUS_HANDLER_RESULT_NEED_MEMORY; } - dbus_message_append_args(reply, DBUS_TYPE_INVALID); - dbus_connection_send(conn, reply, NULL); dbus_connection_flush(conn); dbus_message_unref(reply); + return DBUS_HANDLER_RESULT_HANDLED; +} + +static DBusHandlerResult release_message(DBusConnection *conn, + DBusMessage *msg, void *data) +{ + DBusMessage *reply; + + if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_INVALID)) { + fprintf(stderr, "Invalid arguments for passkey Release method"); + return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; + } + if (!__io_canceled) fprintf(stderr, "Passkey service has been released\n"); __io_terminated = 1; + reply = dbus_message_new_method_return(msg); + if (!reply) { + fprintf(stderr, "Can't create reply message\n"); + return DBUS_HANDLER_RESULT_NEED_MEMORY; + } + + dbus_connection_send(conn, reply, NULL); + + dbus_connection_flush(conn); + + dbus_message_unref(reply); + return DBUS_HANDLER_RESULT_HANDLED; } @@ -147,6 +183,9 @@ static DBusHandlerResult agent_message(DBusConnection *conn, if (dbus_message_is_method_call(msg, "org.bluez.PasskeyAgent", "Request")) return request_message(conn, msg, data); + if (dbus_message_is_method_call(msg, "org.bluez.PasskeyAgent", "Cancel")) + return cancel_message(conn, msg, data); + if (dbus_message_is_method_call(msg, "org.bluez.PasskeyAgent", "Release")) return release_message(conn, msg, data); @@ -166,7 +205,7 @@ static int register_agent(DBusConnection *conn, const char *agent_path, if (!dbus_connection_register_object_path(conn, agent_path, &agent_table, NULL)) { - fprintf(stderr, "Can't register path object path for agent\n"); + fprintf(stderr, "Can't register object path for agent\n"); return -1; } @@ -231,7 +270,7 @@ static int unregister_agent(DBusConnection *conn, const char *agent_path, msg = dbus_message_new_method_call("org.bluez", path, INTERFACE, method); if (!msg) { fprintf(stderr, "Can't allocate new method call\n"); - dbus_connection_close(conn); + dbus_connection_unref(conn); exit(1); } @@ -268,21 +307,16 @@ static int unregister_agent(DBusConnection *conn, const char *agent_path, static void usage(void) { -// printf("Bluetooth passkey agent ver %s\n\n", VERSION); + printf("Bluetooth passkey agent ver %s\n\n", VERSION); printf("Usage:\n" - "\tadd-passkey [--passkey-fd n] [--default] [--path agent-path] [address]\n" - "\n" - "add-passkey will read from passkey-fd (default: stdin) adding a default passkey\n" - "if --default is given, or for a specific address if supplied on commandline.\n\n" - "--default or address are mandatory.\n" - "this program is based on bluez passkey-agent.c from http://bluez.sf.net\n" + "\tpasskey-agent [--default] [--path agent-path] <passkey> [address]\n" "\n"); } static struct option main_options[] = { - { "passkey-fd", 1, 0, 'f'}, { "default", 0, 0, 'd' }, + { "reject", 0, 0, 'r' }, { "path", 1, 0, 'p' }, { "help", 0, 0, 'h' }, { 0, 0, 0, 0 } @@ -293,19 +327,19 @@ int main(int argc, char *argv[]) struct sigaction sa; DBusConnection *conn; char match_string[128], default_path[128], *agent_path = NULL; - int opt, use_default = 0, passkey_fd = 0; - char *tmppasskey; + int opt, use_default = 0; snprintf(default_path, sizeof(default_path), "/org/bluez/passkey_agent_%d", getpid()); - while ((opt = getopt_long(argc, argv, "+fdp:h", main_options, NULL)) != EOF) { + while ((opt = getopt_long(argc, argv, "+dp:h", main_options, NULL)) != EOF) { switch(opt) { - case 'f': - passkey_fd = atoi(optarg); case 'd': use_default = 1; break; + case 'r': + do_reject = 1; + break; case 'p': if (optarg[0] != '/') { fprintf(stderr, "Invalid path\n"); @@ -324,24 +358,14 @@ int main(int argc, char *argv[]) argc -= optind; argv += optind; optind = 0; - - if (argc < 1 && !use_default) { + + if (argc < 1) { usage(); exit(1); } - - passkey = malloc(PASSKEYMAXLENGTH * sizeof(char)); - - if (!read(passkey_fd, passkey, PASSKEYMAXLENGTH)) { - fprintf(stderr, "Unable to read passkey from fd %d\n", passkey_fd); - exit(1); - } - - if (tmppasskey = index(passkey, '\n')) { - *tmppasskey = '\0'; - } - address = (argc > 0) ? strdup(argv[0]) : NULL; + passkey = strdup(argv[0]); + address = (argc > 1) ? strdup(argv[1]) : NULL; if (!use_default && !address) { usage(); @@ -358,7 +382,7 @@ int main(int argc, char *argv[]) } if (register_agent(conn, agent_path, address, use_default) < 0) { - dbus_connection_close(conn); + dbus_connection_unref(conn); exit(1); } @@ -378,7 +402,7 @@ int main(int argc, char *argv[]) sigaction(SIGINT, &sa, NULL); while (!__io_canceled && !__io_terminated) { - if (dbus_connection_read_write_dispatch(conn, 100) != TRUE) + if (dbus_connection_read_write_dispatch(conn, 500) != TRUE) break; } @@ -388,7 +412,7 @@ int main(int argc, char *argv[]) if (passkey) free(passkey); - dbus_connection_close(conn); + dbus_connection_unref(conn); return 0; } diff --git a/source/n/bluez/patches/bluez-dbus-config.patch b/source/n/bluez/patches/bluez-dbus-config.patch new file mode 100644 index 000000000..4160600a5 --- /dev/null +++ b/source/n/bluez/patches/bluez-dbus-config.patch @@ -0,0 +1,25 @@ +Use the plugdev group for bluetooth on Slackware, and allow this to + work as expected with our current setup. + +diff -Nur bluez-4.61.orig//src/bluetooth.conf bluez-4.61/src/bluetooth.conf +--- bluez-4.61.orig//src/bluetooth.conf 2010-02-18 17:48:50.434527785 -0600 ++++ bluez-4.61/src/bluetooth.conf 2010-02-18 17:47:30.727431004 -0600 +@@ -11,11 +11,16 @@ + <allow own="org.bluez"/> + <allow send_destination="org.bluez"/> + <allow send_interface="org.bluez.Agent"/> ++ <allow send_interface="org.bluez.Adapter"/> + <allow send_interface="org.bluez.HandsfreeAgent"/> + </policy> + +- <policy at_console="true"> +- <allow send_destination="org.bluez"/> ++ <policy group="plugdev"> ++ <allow send_destination="org.bluez"/> ++ <allow send_interface="org.bluez.Agent"/> ++ <allow send_interface="org.bluez.Adapter"/> ++ <allow send_destination="org.bluez" ++ send_interface="org.freedesktop.DBus.Introspectable"/> + </policy> + + <!-- allow users of lp group (printing subsystem) to diff --git a/source/n/bluez/patches/bluez-run_udev_helper.patch b/source/n/bluez/patches/bluez-run_udev_helper.patch new file mode 100644 index 000000000..188607453 --- /dev/null +++ b/source/n/bluez/patches/bluez-run_udev_helper.patch @@ -0,0 +1,12 @@ +Instead of automatically starting the bluetooth subsystem when devices + are added, let's invoke a wrapper script in /lib/udev and have that + wrapper check whether /etc/rc.d/rc.bluetooth is executable first. + +diff -Nur bluez-4.59.orig/scripts/bluetooth.rules.in bluez-4.59/scripts/bluetooth.rules.in +--- bluez-4.59.orig/scripts/bluetooth.rules.in 2009-07-06 15:21:40.000000000 -0500 ++++ bluez-4.59/scripts/bluetooth.rules.in 2009-12-30 11:50:37.069164823 -0600 +@@ -1,3 +1,3 @@ + # Run helper every time a Bluetooth device appears + # On remove actions, bluetoothd should go away by itself +-ACTION=="add", SUBSYSTEM=="bluetooth", RUN+="@prefix@/sbin/bluetoothd --udev" ++ACTION=="add", SUBSYSTEM=="bluetooth", RUN+="/lib/udev/bluetooth.sh" diff --git a/source/n/bluez/patches/bluez-unbreak_dell_mouse.patch b/source/n/bluez/patches/bluez-unbreak_dell_mouse.patch new file mode 100644 index 000000000..ec0b4a96b --- /dev/null +++ b/source/n/bluez/patches/bluez-unbreak_dell_mouse.patch @@ -0,0 +1,14 @@ +One of the Dell USB mice gets broken by this rule, so we'll unbreak it. + +diff -Nur bluez-4.59.orig/scripts/bluetooth-hid2hci.rules bluez-4.59/scripts/bluetooth-hid2hci.rules +--- bluez-4.59.orig/scripts/bluetooth-hid2hci.rules 2009-05-19 04:04:10.000000000 -0500 ++++ bluez-4.59/scripts/bluetooth-hid2hci.rules 2009-12-30 12:34:14.165164370 -0600 +@@ -8,7 +8,7 @@ + # 413c:8154 + # 413c:8158 + # 413c:8162 +-ACTION=="add", ENV{ID_VENDOR}=="413c", ENV{ID_CLASS}=="mouse", ATTRS{bmAttributes}=="e0", KERNEL=="mouse*", RUN+="/usr/sbin/hid2hci --method dell -v $env{ID_VENDOR} -p $env{ID_MODEL} --mode hci" ++# ACTION=="add", ENV{ID_VENDOR}=="413c", ENV{ID_CLASS}=="mouse", ATTRS{bmAttributes}=="e0", KERNEL=="mouse*", RUN+="/usr/sbin/hid2hci --method dell -v $env{ID_VENDOR} -p $env{ID_MODEL} --mode hci" + + # Logitech devices + ACTION=="add", ENV{ID_VENDOR}=="046d", ENV{ID_MODEL}=="c703" RUN+="/usr/sbin/hid2hci --method logitech -v $env{ID_VENDOR} -p $env{ID_MODEL} --mode hci" diff --git a/source/n/bluez/slack-desc b/source/n/bluez/slack-desc new file mode 100644 index 000000000..607fa4d96 --- /dev/null +++ b/source/n/bluez/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +bluez: bluez (Bluetooth libraries and utilities) +bluez: +bluez: Bluez is the Bluetooth stack for Linux, allowing Bluetooth adaptors +bluez: and devices to be used with Linux. This package contains the Bluez +bluez: libraries, utilities, and other support files. +bluez: +bluez: For more info, visit: http://www.bluez.org +bluez: +bluez: +bluez: +bluez: diff --git a/source/n/crda/crda.SlackBuild b/source/n/crda/crda.SlackBuild index b055ab520..93ffcd64a 100755 --- a/source/n/crda/crda.SlackBuild +++ b/source/n/crda/crda.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2009 Robby Workman, Northport, AL, USA -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-1.0.1} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-1.1.1} +BUILD=${BUILD:-1} -REGDBVERS=git_20090222 +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +REGDBVERS=git_20100502 CWD=$(pwd) TMP=${TMP:-/tmp} @@ -42,6 +51,8 @@ elif [ "$ARCH" = "arm" ]; then SLKCFLAGS="-O2 -march=armv4 -mtune=xscale" elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" +else + SLKCFLAGS="-O2" fi rm -rf $PKG diff --git a/source/n/curl/cacert.pem b/source/n/curl/cacert.pem index 2feb1e8a2..d7d20b626 100644 --- a/source/n/curl/cacert.pem +++ b/source/n/curl/cacert.pem @@ -1,7 +1,7 @@ ## -## cacert.pem-foo -- Bundle of CA Root Certificates +## ca-bundle.crt -- Bundle of CA Root Certificates ## -## Converted at: Thu Mar 26 21:23:06 2009 UTC +## Converted at: Tue Sep 22 09:25:27 2009 UTC ## ## This is a bundle of X.509 certificates of public Certificate Authorities ## (CA). These were automatically extracted from Mozilla's root certificates @@ -49,7 +49,7 @@ # the terms of any one of the MPL, the GPL or the LGPL. # # ***** END LICENSE BLOCK ***** -# @(#) $RCSfile: certdata.txt,v $ $Revision: 1.51 $ $Date: 2009/01/15 22:35:15 $ +# @(#) $RCSfile: certdata.txt,v $ $Revision: 1.53 $ $Date: 2009/05/21 19:50:28 $ Verisign/RSA Secure Server CA ============================= @@ -3152,3 +3152,358 @@ BQUHAwIwDAYDVR0TAQH/BAIwADANBgkqhkiG9w0BAQQFAAOBgQCnIQKN0Q6igHcl/UNgFY/s75BH 1IRCFSYRHM3CPBApqbbfq1d1kdrlK7OQRRwwY1Y/itlQ+u1YbMBlrGZX3hzGdjv1AA6ORc5/TJDs K8bNs7SPYtD+t8UmckTt9phbrsvRlfXaCL5oRrF1yOwdjx56lPGqU3iiRa5U6tGedMh2Zw== -----END CERTIFICATE----- + +IGC/A +===== +-----BEGIN CERTIFICATE----- +MIIEAjCCAuqgAwIBAgIFORFFEJQwDQYJKoZIhvcNAQEFBQAwgYUxCzAJBgNVBAYTAkZSMQ8wDQYD +VQQIEwZGcmFuY2UxDjAMBgNVBAcTBVBhcmlzMRAwDgYDVQQKEwdQTS9TR0ROMQ4wDAYDVQQLEwVE +Q1NTSTEOMAwGA1UEAxMFSUdDL0ExIzAhBgkqhkiG9w0BCQEWFGlnY2FAc2dkbi5wbS5nb3V2LmZy +MB4XDTAyMTIxMzE0MjkyM1oXDTIwMTAxNzE0MjkyMlowgYUxCzAJBgNVBAYTAkZSMQ8wDQYDVQQI +EwZGcmFuY2UxDjAMBgNVBAcTBVBhcmlzMRAwDgYDVQQKEwdQTS9TR0ROMQ4wDAYDVQQLEwVEQ1NT +STEOMAwGA1UEAxMFSUdDL0ExIzAhBgkqhkiG9w0BCQEWFGlnY2FAc2dkbi5wbS5nb3V2LmZyMIIB +IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAsh/R0GLFMzvABIaIs9z4iPf930Pfeo2aSVz2 +TqrMHLmh6yeJ8kbpO0px1R2OLc/mratjUMdUC24SyZA2xtgv2pGqaMVy/hcKshd+ebUyiHDKcMCW +So7kVc0dJ5S/znIq7Fz5cyD+vfcuiWe4u0dzEvfRNWk68gq5rv9GQkaiv6GFGvm/5P9JhfejcIYy +HF2fYPepraX/z9E0+X1bF8bc1g4oa8Ld8fUzaJ1O/Id8NhLWo4DoQw1VYZTqZDdH6nfK0LJYBcNd +frGoRpAxVs5wKpayMLh35nnAvSk7/ZR3TL0gzUEl4C7HG7vupARB0l2tEmqKm0f7yd1GQOGdPDPQ +tQIDAQABo3cwdTAPBgNVHRMBAf8EBTADAQH/MAsGA1UdDwQEAwIBRjAVBgNVHSAEDjAMMAoGCCqB +egF5AQEBMB0GA1UdDgQWBBSjBS8YYFDCiQrdKyFP/45OqDAxNjAfBgNVHSMEGDAWgBSjBS8YYFDC +iQrdKyFP/45OqDAxNjANBgkqhkiG9w0BAQUFAAOCAQEABdwm2Pp3FURo/C9mOnTgXeQp/wYHE4RK +q89toB9RlPhJy3Q2FLwV3duJL92PoF189RLrn544pEfMs5bZvpwlqwN+Mw+VgQ39FuCIvjfwbF3Q +MZsyK10XZZOYYLxuj7GoPB7ZHPOpJkL5ZB3C55L29B5aqhlSXa/oovdgoPaN8In1buAKBQGVyYsg +Crpa/JosPL3Dt8ldeCUFP1YUmwza+zpI/pdpXsoQhvdOlgQITeywvl3cO45Pwf2aNjSaTFR+FwNI +lQgRHAdvhQh+XU3Endv7rs6y0bO4g2wdsrN58dhwmX7wEwLOXt1R0982gaEbeC9xs/FZTEYYKKuF +0mBWWg== +-----END CERTIFICATE----- + +Security Communication EV RootCA1 +================================= +-----BEGIN CERTIFICATE----- +MIIDfTCCAmWgAwIBAgIBADANBgkqhkiG9w0BAQUFADBgMQswCQYDVQQGEwJKUDElMCMGA1UEChMc +U0VDT00gVHJ1c3QgU3lzdGVtcyBDTy4sTFRELjEqMCgGA1UECxMhU2VjdXJpdHkgQ29tbXVuaWNh +dGlvbiBFViBSb290Q0ExMB4XDTA3MDYwNjAyMTIzMloXDTM3MDYwNjAyMTIzMlowYDELMAkGA1UE +BhMCSlAxJTAjBgNVBAoTHFNFQ09NIFRydXN0IFN5c3RlbXMgQ08uLExURC4xKjAoBgNVBAsTIVNl +Y3VyaXR5IENvbW11bmljYXRpb24gRVYgUm9vdENBMTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCC +AQoCggEBALx/7FebJOD+nLpCeamIivqA4PUHKUPqjgo0No0c+qe1OXj/l3X3L+SqawSERMqm4miO +/VVQYg+kcQ7OBzgtQoVQrTyWb4vVog7P3kmJPdZkLjjlHmy1V4qe70gOzXppFodEtZDkBp2uoQSX +WHnvIEqCa4wiv+wfD+mEce3xDuS4GBPMVjZd0ZoeUWs5bmB2iDQL87PRsJ3KYeJkHcFGB7hj3R4z +ZbOOCVVSPbW9/wfrrWFVGCypaZhKqkDFMxRldAD5kd6vA0jFQFTcD4SQaCDFkpbcLuUCRarAX1T4 +bepJz11sS6/vmsJWXMY1VkJqMF/Cq/biPT+zyRGPMUzXn0kCAwEAAaNCMEAwHQYDVR0OBBYEFDVK +9U2vP9eCOKyrcWUXdYydVZPmMA4GA1UdDwEB/wQEAwIBBjAPBgNVHRMBAf8EBTADAQH/MA0GCSqG +SIb3DQEBBQUAA4IBAQCoh+ns+EBnXcPBZsdAS5f8hxOQWsTvoMpfi7ent/HWtWS3irO4G8za+6xm +iEHO6Pzk2x6Ipu0nUBsCMCRGef4Eh3CXQHPRwMFXGZpppSeZq51ihPZRwSzJIxXYKLerJRO1RuGG +Av8mjMSIkh1W/hln8lXkgKNrnKt34VFxDSDbEJrbvXZ5B3eZKK2aXtqxT0QsNY6llsf9g/BYxnnW +mHyojf6GPgcWkuF75x3sM3Z+Qi5KhfmRiWiEA4Glm5q+4zfFVKtWOxgtQaQM+ELbmaDgcm+7XeEW +T1MKZPlO9L9OVL14bIjqv5wTJMJwaaJ/D8g8rQjJsJhAoyrniIPtd490 +-----END CERTIFICATE----- + +OISTE WISeKey Global Root GA CA +=============================== +-----BEGIN CERTIFICATE----- +MIID8TCCAtmgAwIBAgIQQT1yx/RrH4FDffHSKFTfmjANBgkqhkiG9w0BAQUFADCBijELMAkGA1UE +BhMCQ0gxEDAOBgNVBAoTB1dJU2VLZXkxGzAZBgNVBAsTEkNvcHlyaWdodCAoYykgMjAwNTEiMCAG +A1UECxMZT0lTVEUgRm91bmRhdGlvbiBFbmRvcnNlZDEoMCYGA1UEAxMfT0lTVEUgV0lTZUtleSBH +bG9iYWwgUm9vdCBHQSBDQTAeFw0wNTEyMTExNjAzNDRaFw0zNzEyMTExNjA5NTFaMIGKMQswCQYD +VQQGEwJDSDEQMA4GA1UEChMHV0lTZUtleTEbMBkGA1UECxMSQ29weXJpZ2h0IChjKSAyMDA1MSIw +IAYDVQQLExlPSVNURSBGb3VuZGF0aW9uIEVuZG9yc2VkMSgwJgYDVQQDEx9PSVNURSBXSVNlS2V5 +IEdsb2JhbCBSb290IEdBIENBMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAy0+zAJs9 +Nt350UlqaxBJH+zYK7LG+DKBKUOVTJoZIyEVRd7jyBxRVVuuk+g3/ytr6dTqvirdqFEr12bDYVxg +Asj1znJ7O7jyTmUIms2kahnBAbtzptf2w93NvKSLtZlhuAGio9RN1AU9ka34tAhxZK9w8RxrfvbD +d50kc3vkDIzh2TbhmYsFmQvtRTEJysIA2/dyoJaqlYfQjse2YXMNdmaM3Bu0Y6Kff5MTMPGhJ9vZ +/yxViJGg4E8HsChWjBgbl0SOid3gF27nKu+POQoxhILYQBRJLnpB5Kf+42TMwVlxSywhp1t94B3R +LoGbw9ho972WG6xwsRYUC9tguSYBBQIDAQABo1EwTzALBgNVHQ8EBAMCAYYwDwYDVR0TAQH/BAUw +AwEB/zAdBgNVHQ4EFgQUswN+rja8sHnR3JQmthG+IbJphpQwEAYJKwYBBAGCNxUBBAMCAQAwDQYJ +KoZIhvcNAQEFBQADggEBAEuh/wuHbrP5wUOxSPMowB0uyQlB+pQAHKSkq0lPjz0e701vvbyk9vIm +MMkQyh2I+3QZH4VFvbBsUfk2ftv1TDI6QU9bR8/oCy22xBmddMVHxjtqD6wU2zz0c5ypBd8A3HR4 ++vg1YFkCExh8vPtNsCBtQ7tgMHpnM1zFmdH4LTlSc/uMqpclXHLZCB6rTjzjgTGfA6b7wP4piFXa +hNVQA7bihKOmNqoROgHhGEvWRGizPflTdISzRpFGlgC3gCy24eMQ4tui5yiPAZZiFj4A4xylNoEY +okxSdsARo27mHbrjWr42U8U+dY+GaSlYU7Wcu2+fXMUY7N0v4ZjJ/L7fCg0= +-----END CERTIFICATE----- + +S-TRUST Authentication and Encryption Root CA 2005 PN +===================================================== +-----BEGIN CERTIFICATE----- +MIIEezCCA2OgAwIBAgIQNxkY5lNUfBq1uMtZWts1tzANBgkqhkiG9w0BAQUFADCBrjELMAkGA1UE +BhMCREUxIDAeBgNVBAgTF0JhZGVuLVd1ZXJ0dGVtYmVyZyAoQlcpMRIwEAYDVQQHEwlTdHV0dGdh +cnQxKTAnBgNVBAoTIERldXRzY2hlciBTcGFya2Fzc2VuIFZlcmxhZyBHbWJIMT4wPAYDVQQDEzVT +LVRSVVNUIEF1dGhlbnRpY2F0aW9uIGFuZCBFbmNyeXB0aW9uIFJvb3QgQ0EgMjAwNTpQTjAeFw0w +NTA2MjIwMDAwMDBaFw0zMDA2MjEyMzU5NTlaMIGuMQswCQYDVQQGEwJERTEgMB4GA1UECBMXQmFk +ZW4tV3VlcnR0ZW1iZXJnIChCVykxEjAQBgNVBAcTCVN0dXR0Z2FydDEpMCcGA1UEChMgRGV1dHNj +aGVyIFNwYXJrYXNzZW4gVmVybGFnIEdtYkgxPjA8BgNVBAMTNVMtVFJVU1QgQXV0aGVudGljYXRp +b24gYW5kIEVuY3J5cHRpb24gUm9vdCBDQSAyMDA1OlBOMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A +MIIBCgKCAQEA2bVKwdMz6tNGs9HiTNL1toPQb9UY6ZOvJ44TzbUlNlA0EmQpoVXhOmCTnijJ4/Ob +4QSwI7+Vio5bG0F/WsPoTUzVJBY+h0jUJ67m91MduwwA7z5hca2/OnpYH5Q9XIHV1W/fuJvS9eXL +g3KSwlOyggLrra1fFi2SU3bxibYs9cEv4KdKb6AwajLrmnQDaHgTncovmwsdvs91DSaXm8f1Xgqf +eN+zvOyauu9VjxuapgdjKRdZYgkqeQd3peDRF2npW932kKvimAoA0SVtnteFhy+S8dF2g08LOlk3 +KC8zpxdQ1iALCvQm+Z845y2kuJuJja2tyWp9iRe79n+Ag3rm7QIDAQABo4GSMIGPMBIGA1UdEwEB +/wQIMAYBAf8CAQAwDgYDVR0PAQH/BAQDAgEGMCkGA1UdEQQiMCCkHjAcMRowGAYDVQQDExFTVFJv +bmxpbmUxLTIwNDgtNTAdBgNVHQ4EFgQUD8oeXHngovMpttKFswtKtWXsa1IwHwYDVR0jBBgwFoAU +D8oeXHngovMpttKFswtKtWXsa1IwDQYJKoZIhvcNAQEFBQADggEBAK8B8O0ZPCjoTVy7pWMciDMD +pwCHpB8gq9Yc4wYfl35UvbfRssnV2oDsF9eK9XvCAPbpEW+EoFolMeKJ+aQAPzFoLtU96G7m1R08 +P7K9n3frndOMusDXtk3sU5wPBG7qNWdX4wple5A64U8+wwCSersFiXOMy6ZNwPv2AtawB6MDwidA +nwzkhYItr5pCHdDHjfhA7p0GVxzZotiAFP7hYy0yh9WUUpY6RsZxlj33mA6ykaqP2vROJAA5Veit +F7nTNCtKqUDMFypVZUF0Qn71wK/Ik63yGFs9iQzbRzkk+OBM8h+wPQrKBU6JIRrjKpms/H+h8Q8b +Hz2eBIPdltkdOpQ= +-----END CERTIFICATE----- + +Microsec e-Szigno Root CA +========================= +-----BEGIN CERTIFICATE----- +MIIHqDCCBpCgAwIBAgIRAMy4579OKRr9otxmpRwsDxEwDQYJKoZIhvcNAQEFBQAwcjELMAkGA1UE +BhMCSFUxETAPBgNVBAcTCEJ1ZGFwZXN0MRYwFAYDVQQKEw1NaWNyb3NlYyBMdGQuMRQwEgYDVQQL +EwtlLVN6aWdubyBDQTEiMCAGA1UEAxMZTWljcm9zZWMgZS1Temlnbm8gUm9vdCBDQTAeFw0wNTA0 +MDYxMjI4NDRaFw0xNzA0MDYxMjI4NDRaMHIxCzAJBgNVBAYTAkhVMREwDwYDVQQHEwhCdWRhcGVz +dDEWMBQGA1UEChMNTWljcm9zZWMgTHRkLjEUMBIGA1UECxMLZS1Temlnbm8gQ0ExIjAgBgNVBAMT +GU1pY3Jvc2VjIGUtU3ppZ25vIFJvb3QgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB +AQDtyADVgXvNOABHzNuEwSFpLHSQDCHZU4ftPkNEU6+r+ICbPHiN1I2uuO/TEdyB5s87lozWbxXG +d36hL+BfkrYn13aaHUM86tnsL+4582pnS4uCzyL4ZVX+LMsvfUh6PXX5qqAnu3jCBspRwn5mS6/N +oqdNAoI/gqyFxuEPkEeZlApxcpMqyabAvjxWTHOSJ/FrtfX9/DAFYJLG65Z+AZHCabEeHXtTRbjc +QR/Ji3HWVBTji1R4P770Yjtb9aPs1ZJ04nQw7wHb4dSrmZsqa/i9phyGI0Jf7Enemotb9HI6QMVJ +PqW+jqpx62z69Rrkav17fVVA71hu5tnVvCSrwe+3AgMBAAGjggQ3MIIEMzBnBggrBgEFBQcBAQRb +MFkwKAYIKwYBBQUHMAGGHGh0dHBzOi8vcmNhLmUtc3ppZ25vLmh1L29jc3AwLQYIKwYBBQUHMAKG +IWh0dHA6Ly93d3cuZS1zemlnbm8uaHUvUm9vdENBLmNydDAPBgNVHRMBAf8EBTADAQH/MIIBcwYD +VR0gBIIBajCCAWYwggFiBgwrBgEEAYGoGAIBAQEwggFQMCgGCCsGAQUFBwIBFhxodHRwOi8vd3d3 +LmUtc3ppZ25vLmh1L1NaU1ovMIIBIgYIKwYBBQUHAgIwggEUHoIBEABBACAAdABhAG4A+gBzAO0A +dAB2AOEAbgB5ACAA6QByAHQAZQBsAG0AZQB6AOkAcwDpAGgAZQB6ACAA6QBzACAAZQBsAGYAbwBn +AGEAZADhAHMA4QBoAG8AegAgAGEAIABTAHoAbwBsAGcA4QBsAHQAYQB0APMAIABTAHoAbwBsAGcA +4QBsAHQAYQB0AOEAcwBpACAAUwB6AGEAYgDhAGwAeQB6AGEAdABhACAAcwB6AGUAcgBpAG4AdAAg +AGsAZQBsAGwAIABlAGwAagDhAHIAbgBpADoAIABoAHQAdABwADoALwAvAHcAdwB3AC4AZQAtAHMA +egBpAGcAbgBvAC4AaAB1AC8AUwBaAFMAWgAvMIHIBgNVHR8EgcAwgb0wgbqggbeggbSGIWh0dHA6 +Ly93d3cuZS1zemlnbm8uaHUvUm9vdENBLmNybIaBjmxkYXA6Ly9sZGFwLmUtc3ppZ25vLmh1L0NO +PU1pY3Jvc2VjJTIwZS1Temlnbm8lMjBSb290JTIwQ0EsT1U9ZS1Temlnbm8lMjBDQSxPPU1pY3Jv +c2VjJTIwTHRkLixMPUJ1ZGFwZXN0LEM9SFU/Y2VydGlmaWNhdGVSZXZvY2F0aW9uTGlzdDtiaW5h +cnkwDgYDVR0PAQH/BAQDAgEGMIGWBgNVHREEgY4wgYuBEGluZm9AZS1zemlnbm8uaHWkdzB1MSMw +IQYDVQQDDBpNaWNyb3NlYyBlLVN6aWduw7MgUm9vdCBDQTEWMBQGA1UECwwNZS1TemlnbsOzIEhT +WjEWMBQGA1UEChMNTWljcm9zZWMgS2Z0LjERMA8GA1UEBxMIQnVkYXBlc3QxCzAJBgNVBAYTAkhV +MIGsBgNVHSMEgaQwgaGAFMegSXUWYYTbMUuE0vE3QJDvTtz3oXakdDByMQswCQYDVQQGEwJIVTER +MA8GA1UEBxMIQnVkYXBlc3QxFjAUBgNVBAoTDU1pY3Jvc2VjIEx0ZC4xFDASBgNVBAsTC2UtU3pp +Z25vIENBMSIwIAYDVQQDExlNaWNyb3NlYyBlLVN6aWdubyBSb290IENBghEAzLjnv04pGv2i3Gal +HCwPETAdBgNVHQ4EFgQUx6BJdRZhhNsxS4TS8TdAkO9O3PcwDQYJKoZIhvcNAQEFBQADggEBANMT +nGZjWS7KXHAM/IO8VbH0jgdsZifOwTsgqRy7RlRw7lrMoHfqaEQn6/Ip3Xep1fvj1KcExJW4C+FE +aGAHQzAxQmHl7tnlJNUb3+FKG6qfx1/4ehHqE5MAyopYse7tDk2016g2JnzgOsHVV4Lxdbb9iV/a +86g4nzUGCM4ilb7N1fy+W955a9x6qWVmvrElWl/tftOsRm1M9DKHtCAE4Gx4sHfRhUZLphK3dehK +yVZs15KrnfVJONJPU+NVkBHbmJbGSfI+9J8b4PeI3CVimUTYc78/MPMMNz7UwiiAc7EBt51alhQB +S6kRnSlqLtBdgcDPsiBDxwPgN05dCtxZICU= +-----END CERTIFICATE----- + +Certigna +======== +-----BEGIN CERTIFICATE----- +MIIDqDCCApCgAwIBAgIJAP7c4wEPyUj/MA0GCSqGSIb3DQEBBQUAMDQxCzAJBgNVBAYTAkZSMRIw +EAYDVQQKDAlEaGlteW90aXMxETAPBgNVBAMMCENlcnRpZ25hMB4XDTA3MDYyOTE1MTMwNVoXDTI3 +MDYyOTE1MTMwNVowNDELMAkGA1UEBhMCRlIxEjAQBgNVBAoMCURoaW15b3RpczERMA8GA1UEAwwI +Q2VydGlnbmEwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDIaPHJ1tazNHUmgh7stL7q +XOEm7RFHYeGifBZ4QCHkYJ5ayGPhxLGWkv8YbWkj4Sti993iNi+RB7lIzw7sebYs5zRLcAglozyH +GxnygQcPOJAZ0xH+hrTy0V4eHpbNgGzOOzGTtvKg0KmVEn2lmsxryIRWijOp5yIVUxbwzBfsV1/p +ogqYCd7jX5xv3EjjhQsVWqa6n6xI4wmy9/Qy3l40vhx4XUJbzg4ij02Q130yGLMLLGq/jj8UEYkg +DncUtT2UCIf3JR7VsmAA7G8qKCVuKj4YYxclPz5EIBb2JsglrgVKtOdjLPOMFlN+XPsRGgjBRmKf +Irjxwo1p3Po6WAbfAgMBAAGjgbwwgbkwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUGu3+QTmQ +tCRZvgHyUtVF9lo53BEwZAYDVR0jBF0wW4AUGu3+QTmQtCRZvgHyUtVF9lo53BGhOKQ2MDQxCzAJ +BgNVBAYTAkZSMRIwEAYDVQQKDAlEaGlteW90aXMxETAPBgNVBAMMCENlcnRpZ25hggkA/tzjAQ/J +SP8wDgYDVR0PAQH/BAQDAgEGMBEGCWCGSAGG+EIBAQQEAwIABzANBgkqhkiG9w0BAQUFAAOCAQEA +hQMeknH2Qq/ho2Ge6/PAD/Kl1NqV5ta+aDY9fm4fTIrv0Q8hbV6lUmPOEvjvKtpv6zf+EwLHyzs+ +ImvaYS5/1HI93TDhHkxAGYwP15zRgzB7mFncfca5DClMoTOi62c6ZYTTluLtdkVwj7Ur3vkj1klu +PBS1xp81HlDQwY9qcEQCYsuuHWhBp6pX6FOqB9IG9tUUBguRA3UsbHK1YZWaDYu5Def131TN3ubY +1gkIl2PlwS6wt0QmwCbAr1UwnjvVNioZBPRcHv/PLLf/0P2HQBHVESO7SMAhqaQoLf0V+LBOK/Qw +WyH8EZE0vkHve52Xdf+XlcCWWC/qu0bXu+TZLg== +-----END CERTIFICATE----- + +AC Ra+¡z Certic+ímara S.A. +========================== +-----BEGIN CERTIFICATE----- +MIIGZjCCBE6gAwIBAgIPB35Sk3vgFeNX8GmMy+wMMA0GCSqGSIb3DQEBBQUAMHsxCzAJBgNVBAYT +AkNPMUcwRQYDVQQKDD5Tb2NpZWRhZCBDYW1lcmFsIGRlIENlcnRpZmljYWNpw7NuIERpZ2l0YWwg +LSBDZXJ0aWPDoW1hcmEgUy5BLjEjMCEGA1UEAwwaQUMgUmHDrXogQ2VydGljw6FtYXJhIFMuQS4w +HhcNMDYxMTI3MjA0NjI5WhcNMzAwNDAyMjE0MjAyWjB7MQswCQYDVQQGEwJDTzFHMEUGA1UECgw+ +U29jaWVkYWQgQ2FtZXJhbCBkZSBDZXJ0aWZpY2FjacOzbiBEaWdpdGFsIC0gQ2VydGljw6FtYXJh +IFMuQS4xIzAhBgNVBAMMGkFDIFJhw616IENlcnRpY8OhbWFyYSBTLkEuMIICIjANBgkqhkiG9w0B +AQEFAAOCAg8AMIICCgKCAgEAq2uJo1PMSCMI+8PPUZYILrgIem08kBeGqentLhM0R7LQcNzJPNCN +yu5LF6vQhbCnIwTLqKL85XXbQMpiiY9QngE9JlsYhBzLfDe3fezTf3MZsGqy2IiKLUV0qPezuMDU +2s0iiXRNWhU5cxh0T7XrmafBHoi0wpOQY5fzp6cSsgkiBzPZkc0OnB8OIMfuuzONj8LSWKdf/WU3 +4ojC2I+GdV75LaeHM/J4Ny+LvB2GNzmxlPLYvEqcgxhaBvzz1NS6jBUJJfD5to0EfhcSM2tXSExP +2yYe68yQ54v5aHxwD6Mq0Do43zeX4lvegGHTgNiRg0JaTASJaBE8rF9ogEHMYELODVoqDA+bMMCm +8Ibbq0nXl21Ii/kDwFJnmxL3wvIumGVC2daa49AZMQyth9VXAnow6IYm+48jilSH5L887uvDdUhf +HjlvgWJsxS3EF1QZtzeNnDeRyPYL1epjb4OsOMLzP96a++EjYfDIJss2yKHzMI+ko6Kh3VOz3vCa +Mh+DkXkwwakfU5tTohVTP92dsxA7SH2JD/ztA/X7JWR1DhcZDY8AFmd5ekD8LVkH2ZD6mq093ICK +5lw1omdMEWux+IBkAC1vImHFrEsm5VoQgpukg3s0956JkSCXjrdCx2bD0Omk1vUgjcTDlaxECp1b +czwmPS9KvqfJpxAe+59QafMCAwEAAaOB5jCB4zAPBgNVHRMBAf8EBTADAQH/MA4GA1UdDwEB/wQE +AwIBBjAdBgNVHQ4EFgQU0QnQ6dfOeXRU+Tows/RtLAMDG2gwgaAGA1UdIASBmDCBlTCBkgYEVR0g +ADCBiTArBggrBgEFBQcCARYfaHR0cDovL3d3dy5jZXJ0aWNhbWFyYS5jb20vZHBjLzBaBggrBgEF +BQcCAjBOGkxMaW1pdGFjaW9uZXMgZGUgZ2FyYW507WFzIGRlIGVzdGUgY2VydGlmaWNhZG8gc2Ug +cHVlZGVuIGVuY29udHJhciBlbiBsYSBEUEMuMA0GCSqGSIb3DQEBBQUAA4ICAQBclLW4RZFNjmEf +AygPU3zmpFmps4p6xbD/CHwso3EcIRNnoZUSQDWDg4902zNc8El2CoFS3UnUmjIz75uny3XlesuX +EpBcunvFm9+7OSPI/5jOCk0iAUgHforA1SBClETvv3eiiWdIG0ADBaGJ7M9i4z0ldma/Jre7Ir5v +/zlXdLp6yQGVwZVR6Kss+LGGIOk/yzVb0hfpKv6DExdA7ohiZVvVO2Dpezy4ydV/NgIlqmjCMRW3 +MGXrfx1IebHPOeJCgBbT9ZMj/EyXyVo3bHwi2ErN0o42gzmRkBDI8ck1fj+404HGIGQatlDCIaR4 +3NAvO2STdPCWkPHv+wlaNECW8DYSwaN0jJN+Qd53i+yG2dIPPy3RzECiiWZIHiCznCNZc6lEc7wk +eZBWN7PGKX6jD/EpOe9+XCgycDWs2rjIdWb8m0w5R44bb5tNAlQiM+9hup4phO9OSzNHdpdqy35f +/RWmnkJDW2ZaiogN9xa5P1FlK2Zqi9E4UqLWRhH6/JocdJ6PlwsCT2TG9WjTSy3/pDceiz+/RL5h +RqGEPQgnTIEgd4kI6mdAXmwIUV80WoyWaM3X94nCHNMyAK9Sy9NgWyo6R35rMDOhYil/SrnhLecU +Iw4OGEfhefwVVdCx/CVxY3UzHCMrr1zZ7Ud3YA47Dx7SwNxkBYn8eNZcLCZDqQ== +-----END CERTIFICATE----- + +TC TrustCenter Class 2 CA II +============================ +-----BEGIN CERTIFICATE----- +MIIEqjCCA5KgAwIBAgIOLmoAAQACH9dSISwRXDswDQYJKoZIhvcNAQEFBQAwdjELMAkGA1UEBhMC +REUxHDAaBgNVBAoTE1RDIFRydXN0Q2VudGVyIEdtYkgxIjAgBgNVBAsTGVRDIFRydXN0Q2VudGVy +IENsYXNzIDIgQ0ExJTAjBgNVBAMTHFRDIFRydXN0Q2VudGVyIENsYXNzIDIgQ0EgSUkwHhcNMDYw +MTEyMTQzODQzWhcNMjUxMjMxMjI1OTU5WjB2MQswCQYDVQQGEwJERTEcMBoGA1UEChMTVEMgVHJ1 +c3RDZW50ZXIgR21iSDEiMCAGA1UECxMZVEMgVHJ1c3RDZW50ZXIgQ2xhc3MgMiBDQTElMCMGA1UE +AxMcVEMgVHJ1c3RDZW50ZXIgQ2xhc3MgMiBDQSBJSTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCC +AQoCggEBAKuAh5uO8MN8h9foJIIRszzdQ2Lu+MNF2ujhoF/RKrLqk2jftMjWQ+nEdVl//OEd+DFw +IxuInie5e/060smp6RQvkL4DUsFJzfb95AhmC1eKokKguNV/aVyQMrKXDcpK3EY+AlWJU+MaWss2 +xgdW94zPEfRMuzBwBJWl9jmM/XOBCH2JXjIeIqkiRUuwZi4wzJ9l/fzLganx4Duvo4bRierERXlQ +Xa7pIXSSTYtZgo+U4+lK8edJsBTj9WLL1XK9H7nSn6DNqPoByNkN39r8R52zyFTfSUrxIan+GE7u +SNQZu+995OKdy1u2bv/jzVrndIIFuoAlOMvkaZ6vQaoahPUCAwEAAaOCATQwggEwMA8GA1UdEwEB +/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgEGMB0GA1UdDgQWBBTjq1RMgKHbVkO3kUrL84J6E1wIqzCB +7QYDVR0fBIHlMIHiMIHfoIHcoIHZhjVodHRwOi8vd3d3LnRydXN0Y2VudGVyLmRlL2NybC92Mi90 +Y19jbGFzc18yX2NhX0lJLmNybIaBn2xkYXA6Ly93d3cudHJ1c3RjZW50ZXIuZGUvQ049VEMlMjBU +cnVzdENlbnRlciUyMENsYXNzJTIwMiUyMENBJTIwSUksTz1UQyUyMFRydXN0Q2VudGVyJTIwR21i +SCxPVT1yb290Y2VydHMsREM9dHJ1c3RjZW50ZXIsREM9ZGU/Y2VydGlmaWNhdGVSZXZvY2F0aW9u +TGlzdD9iYXNlPzANBgkqhkiG9w0BAQUFAAOCAQEAjNfffu4bgBCzg/XbEeprS6iSGNn3Bzn1LL4G +dXpoUxUc6krtXvwjshOg0wn/9vYua0Fxec3ibf2uWWuFHbhOIprtZjluS5TmVfwLG4t3wVMTZonZ +KNaL80VKY7f9ewthXbhtvsPcW3nS7Yblok2+XnR8au0WOB9/WIFaGusyiC2y8zl3gK9etmF1Kdsj +TYjKUCjLhdLTEKJZbtOTVAB6okaVhgWcqRmY5TFyDADiZ9lA4CQze28suVyrZZ0srHbqNZn1l7kP +JOzHdiEoZa5X6AeIdUpWoNIFOqTmjZKILPPy4cHGYdtBxceb9w4aUUXCYWvcZCcXjFq32nQozZfk +vQ== +-----END CERTIFICATE----- + +TC TrustCenter Class 3 CA II +============================ +-----BEGIN CERTIFICATE----- +MIIEqjCCA5KgAwIBAgIOSkcAAQAC5aBd1j8AUb8wDQYJKoZIhvcNAQEFBQAwdjELMAkGA1UEBhMC +REUxHDAaBgNVBAoTE1RDIFRydXN0Q2VudGVyIEdtYkgxIjAgBgNVBAsTGVRDIFRydXN0Q2VudGVy +IENsYXNzIDMgQ0ExJTAjBgNVBAMTHFRDIFRydXN0Q2VudGVyIENsYXNzIDMgQ0EgSUkwHhcNMDYw +MTEyMTQ0MTU3WhcNMjUxMjMxMjI1OTU5WjB2MQswCQYDVQQGEwJERTEcMBoGA1UEChMTVEMgVHJ1 +c3RDZW50ZXIgR21iSDEiMCAGA1UECxMZVEMgVHJ1c3RDZW50ZXIgQ2xhc3MgMyBDQTElMCMGA1UE +AxMcVEMgVHJ1c3RDZW50ZXIgQ2xhc3MgMyBDQSBJSTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCC +AQoCggEBALTgu1G7OVyLBMVMeRwjhjEQY0NVJz/GRcekPewJDRoeIMJWHt4bNwcwIi9v8Qbxq63W +yKthoy9DxLCyLfzDlml7forkzMA5EpBCYMnMNWju2l+QVl/NHE1bWEnrDgFPZPosPIlY2C8u4rBo +6SI7dYnWRBpl8huXJh0obazovVkdKyT21oQDZogkAHhg8fir/gKya/si+zXmFtGt9i4S5Po1auUZ +uV3bOx4a+9P/FRQI2AlqukWdFHlgfa9Aigdzs5OW03Q0jTo3Kd5c7PXuLjHCINy+8U9/I1LZW+Jk +2ZyqBwi1Rb3R0DHBq1SfqdLDYmAD8bs5SpJKPQq5ncWg/jcCAwEAAaOCATQwggEwMA8GA1UdEwEB +/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgEGMB0GA1UdDgQWBBTUovyfs8PYA9NXXAek0CSnwPIA1DCB +7QYDVR0fBIHlMIHiMIHfoIHcoIHZhjVodHRwOi8vd3d3LnRydXN0Y2VudGVyLmRlL2NybC92Mi90 +Y19jbGFzc18zX2NhX0lJLmNybIaBn2xkYXA6Ly93d3cudHJ1c3RjZW50ZXIuZGUvQ049VEMlMjBU +cnVzdENlbnRlciUyMENsYXNzJTIwMyUyMENBJTIwSUksTz1UQyUyMFRydXN0Q2VudGVyJTIwR21i +SCxPVT1yb290Y2VydHMsREM9dHJ1c3RjZW50ZXIsREM9ZGU/Y2VydGlmaWNhdGVSZXZvY2F0aW9u +TGlzdD9iYXNlPzANBgkqhkiG9w0BAQUFAAOCAQEANmDkcPcGIEPZIxpC8vijsrlNirTzwppVMXzE +O2eatN9NDoqTSheLG43KieHPOh6sHfGcMrSOWXaiQYUlN6AT0PV8TtXqluJucsG7Kv5sbviRmEb8 +yRtXW+rIGjs/sFGYPAfaLFkB2otE6OF0/ado3VS6g0bsyEa1+K+XwDsJHI/OcpY9M1ZwvJbL2NV9 +IJqDnxrcOfHFcqMRA/07QlIp2+gB95tejNaNhk4Z+rwcvsUhpYeeeC422wlxo3I0+GzjBgnyXlal +092Y+tTmBvTwtiBjS+opvaqCZh77gaqnN60TGOaSw4HBM7uIHqHn4rS9MWwOUT1v+5ZWgOI2F9Hc +5A== +-----END CERTIFICATE----- + +TC TrustCenter Universal CA I +============================= +-----BEGIN CERTIFICATE----- +MIID3TCCAsWgAwIBAgIOHaIAAQAC7LdggHiNtgYwDQYJKoZIhvcNAQEFBQAweTELMAkGA1UEBhMC +REUxHDAaBgNVBAoTE1RDIFRydXN0Q2VudGVyIEdtYkgxJDAiBgNVBAsTG1RDIFRydXN0Q2VudGVy +IFVuaXZlcnNhbCBDQTEmMCQGA1UEAxMdVEMgVHJ1c3RDZW50ZXIgVW5pdmVyc2FsIENBIEkwHhcN +MDYwMzIyMTU1NDI4WhcNMjUxMjMxMjI1OTU5WjB5MQswCQYDVQQGEwJERTEcMBoGA1UEChMTVEMg +VHJ1c3RDZW50ZXIgR21iSDEkMCIGA1UECxMbVEMgVHJ1c3RDZW50ZXIgVW5pdmVyc2FsIENBMSYw +JAYDVQQDEx1UQyBUcnVzdENlbnRlciBVbml2ZXJzYWwgQ0EgSTCCASIwDQYJKoZIhvcNAQEBBQAD +ggEPADCCAQoCggEBAKR3I5ZEr5D0MacQ9CaHnPM42Q9e3s9B6DGtxnSRJJZ4Hgmgm5qVSkr1YnwC +qMqs+1oEdjneX/H5s7/zA1hV0qq34wQi0fiU2iIIAI3TfCZdzHd55yx4Oagmcw6iXSVphU9VDprv +xrlE4Vc93x9UIuVvZaozhDrzznq+VZeujRIPFDPiUHDDSYcTvFHe15gSWu86gzOSBnWLknwSaHtw +ag+1m7Z3W0hZneTvWq3zwZ7U10VOylY0Ibw+F1tvdwxIAUMpsN0/lm7mlaoMwCC2/T42J5zjXM9O +gdwZu5GQfezmlwQek8wiSdeXhrYTCjxDI3d+8NzmzSQfO4ObNDqDNOMCAwEAAaNjMGEwHwYDVR0j +BBgwFoAUkqR1LKSevoFE63n8isWVpesQdXMwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC +AYYwHQYDVR0OBBYEFJKkdSyknr6BROt5/IrFlaXrEHVzMA0GCSqGSIb3DQEBBQUAA4IBAQAo0uCG +1eb4e/CX3CJrO5UUVg8RMKWaTzqwOuAGy2X17caXJ/4l8lfmXpWMPmRgFVp/Lw0BxbFg/UU1z/Cy +vwbZ71q+s2IhtNerNXxTPqYn8aEt2hojnczd7Dwtnic0XQ/CNnm8yUpiLe1r2X1BQ3y2qsrtYbE3 +ghUJGooWMNjsydZHcnhLEEYUjl8Or+zHL6sQ17bxbuyGssLoDZJz3KL0Dzq/YSMQiZxIQG5wALPT +ujdEWBF6AmqI8Dc08BnprNRlc/ZpjGSUOnmFKbAWKwyCPwacx/0QK54PLLae4xW/2TYcuiUaUj0a +7CIMHOCkoj3w6DnPgcB77V0fb8XQC9eY +-----END CERTIFICATE----- + +Deutsche Telekom Root CA 2 +========================== +-----BEGIN CERTIFICATE----- +MIIDnzCCAoegAwIBAgIBJjANBgkqhkiG9w0BAQUFADBxMQswCQYDVQQGEwJERTEcMBoGA1UEChMT +RGV1dHNjaGUgVGVsZWtvbSBBRzEfMB0GA1UECxMWVC1UZWxlU2VjIFRydXN0IENlbnRlcjEjMCEG +A1UEAxMaRGV1dHNjaGUgVGVsZWtvbSBSb290IENBIDIwHhcNOTkwNzA5MTIxMTAwWhcNMTkwNzA5 +MjM1OTAwWjBxMQswCQYDVQQGEwJERTEcMBoGA1UEChMTRGV1dHNjaGUgVGVsZWtvbSBBRzEfMB0G +A1UECxMWVC1UZWxlU2VjIFRydXN0IENlbnRlcjEjMCEGA1UEAxMaRGV1dHNjaGUgVGVsZWtvbSBS +b290IENBIDIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCrC6M14IspFLEUha88EOQ5 +bzVdSq7d6mGNlUn0b2SjGmBmpKlAIoTZ1KXleJMOaAGtuU1cOs7TuKhCQN/Po7qCWWqSG6wcmtoI +KyUn+WkjR/Hg6yx6m/UTAtB+NHzCnjwAWav12gz1MjwrrFDa1sPeg5TKqAyZMg4ISFZbavva4VhY +AUlfckE8FQYBjl2tqriTtM2e66foai1SNNs671x1Udrb8zH57nGYMsRUFUQM+ZtV7a3fGAigo4aK +Se5TBY8ZTNXeWHmb0mocQqvF1afPaA+W5OFhmHZhyJF81j4A4pFQh+GdCuatl9Idxjp9y7zaAzTV +jlsB9WoHtxa2bkp/AgMBAAGjQjBAMB0GA1UdDgQWBBQxw3kbuvVT1xfgiXotF2wKsyudMzAPBgNV +HRMECDAGAQH/AgEFMA4GA1UdDwEB/wQEAwIBBjANBgkqhkiG9w0BAQUFAAOCAQEAlGRZrTlk5ynr +E/5aw4sTV8gEJPB0d8Bg42f76Ymmg7+Wgnxu1MM9756AbrsptJh6sTtU6zkXR34ajgv8HzFZMQSy +zhfzLMdiNlXiItiJVbSYSKpk+tYcNthEeFpaIzpXl/V6ME+un2pMSyuOoAPjPuCp1NJ70rOo4nI8 +rZ7/gFnkm0W09juwzTkZmDLl6iFhkOQxIY40sfcvNUqFENrnijchvllj4PKFiDFT1FQUhXB59C4G +dyd1Lx+4ivn+xbrYNuSD7Odlt79jWvNGr4GUN9RBjNYj1h7P9WgbRGOiWrqnNVmh5XAFmw4jV5mU +Cm26OWMohpLzGITY+9HPBVZkVw== +-----END CERTIFICATE----- + +ComSign CA +========== +-----BEGIN CERTIFICATE----- +MIIDkzCCAnugAwIBAgIQFBOWgxRVjOp7Y+X8NId3RDANBgkqhkiG9w0BAQUFADA0MRMwEQYDVQQD +EwpDb21TaWduIENBMRAwDgYDVQQKEwdDb21TaWduMQswCQYDVQQGEwJJTDAeFw0wNDAzMjQxMTMy +MThaFw0yOTAzMTkxNTAyMThaMDQxEzARBgNVBAMTCkNvbVNpZ24gQ0ExEDAOBgNVBAoTB0NvbVNp +Z24xCzAJBgNVBAYTAklMMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA8ORUaSvTx49q +ROR+WCf4C9DklBKK8Rs4OC8fMZwG1Cyn3gsqrhqg455qv588x26i+YtkbDqthVVRVKU4VbirgwTy +P2Q298CNQ0NqZtH3FyrV7zb6MBBC11PN+fozc0yz6YQgitZBJzXkOPqUm7h65HkfM/sb2CEJKHxN +GGleZIp6GZPKfuzzcuc3B1hZKKxC+cX/zT/npfo4sdAMx9lSGlPWgcxCejVb7Us6eva1jsz/D3zk +YDaHL63woSV9/9JLEYhwVKZBqGdTUkJe5DSe5L6j7KpiXd3DTKaCQeQzC6zJMw9kglcq/QytNuEM +rkvF7zuZ2SOzW120V+x0cAwqTwIDAQABo4GgMIGdMAwGA1UdEwQFMAMBAf8wPQYDVR0fBDYwNDAy +oDCgLoYsaHR0cDovL2ZlZGlyLmNvbXNpZ24uY28uaWwvY3JsL0NvbVNpZ25DQS5jcmwwDgYDVR0P +AQH/BAQDAgGGMB8GA1UdIwQYMBaAFEsBmz5WGmU2dst7l6qSBe4y5ygxMB0GA1UdDgQWBBRLAZs+ +VhplNnbLe5eqkgXuMucoMTANBgkqhkiG9w0BAQUFAAOCAQEA0Nmlfv4pYEWdfoPPbrxHbvUanlR2 +QnG0PFg/LUAlQvaBnPGJEMgOqnhPOAlXsDzACPw1jvFIUY0McXS6hMTXcpuEfDhOZAYnKuGntewI +mbQKDdSFc8gS4TXt8QUxHXOZDOuWyt3T5oWq8Ir7dcHyCTxlZWTzTNity4hp8+SDtwy9F1qWF8pb +/627HOkthIDYIb6FUtnUdLlphbpN7Sgy6/lhSuTENh4Z3G+EER+V9YMoGKgzkkMn3V0TBEVPh9VG +zT2ouvDzuFYkRes3x+F2T3I5GN9+dHLHcy056mDmrRGiVod7w2ia/viMcKjfZTL0pECMocJEAw6U +AGegcQCCSA== +-----END CERTIFICATE----- + +ComSign Secured CA +================== +-----BEGIN CERTIFICATE----- +MIIDqzCCApOgAwIBAgIRAMcoRwmzuGxFjB36JPU2TukwDQYJKoZIhvcNAQEFBQAwPDEbMBkGA1UE +AxMSQ29tU2lnbiBTZWN1cmVkIENBMRAwDgYDVQQKEwdDb21TaWduMQswCQYDVQQGEwJJTDAeFw0w +NDAzMjQxMTM3MjBaFw0yOTAzMTYxNTA0NTZaMDwxGzAZBgNVBAMTEkNvbVNpZ24gU2VjdXJlZCBD +QTEQMA4GA1UEChMHQ29tU2lnbjELMAkGA1UEBhMCSUwwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAw +ggEKAoIBAQDGtWhfHZQVw6QIVS3joFd67+l0Kru5fFdJGhFeTymHDEjWaueP1H5XJLkGieQcPOqs +49ohgHMhCu95mGwfCP+hUH3ymBvJVG8+pSjsIQQPRbsHPaHA+iqYHU4Gk/v1iDurX8sWv+bznkqH +7Rnqwp9D5PGBpX8QTz7RSmKtUxvLg/8HZaWSLWapW7ha9B20IZFKF3ueMv5WJDmyVIRD9YTC2LxB +kMyd1mja6YJQqTtoz7VdApRgFrFD2UNd3V2Hbuq7s8lr9gOUCXDeFhF6K+h2j0kQmHe5Y1yLM5d1 +9guMsqtb3nQgJT/j8xH5h2iGNXHDHYwt6+UarA9z1YJZQIDTAgMBAAGjgacwgaQwDAYDVR0TBAUw +AwEB/zBEBgNVHR8EPTA7MDmgN6A1hjNodHRwOi8vZmVkaXIuY29tc2lnbi5jby5pbC9jcmwvQ29t +U2lnblNlY3VyZWRDQS5jcmwwDgYDVR0PAQH/BAQDAgGGMB8GA1UdIwQYMBaAFMFL7XC29z58ADsA +j8c+DkWfHl3sMB0GA1UdDgQWBBTBS+1wtvc+fAA7AI/HPg5Fnx5d7DANBgkqhkiG9w0BAQUFAAOC +AQEAFs/ukhNQq3sUnjO2QiBq1BW9Cav8cujvR3qQrFHBZE7piL1DRYHjZiM/EoZNGeQFsOY3wo3a +BijJD4mkU6l1P7CW+6tMM1X5eCZGbxs2mPtCdsGCuY7e+0X5YxtiOzkGynd6qDwJz2w2PQ8KRUtp +FhpFfTMDZflScZAmlaxMDPWLkz/MdXSFmLr/YnpNH4n+rr2UAJm/EaXc4HnFFgt9AmEd6oX5AhVP +51qJThRv4zdLhfXBPGHg/QVBspJ/wx2g0K5SZGBrGMYmnNj1ZOQ2GmKfig8+/21OGVZOIJFsnzQz +OjRXUDpvgV4GxvU+fE6OK85lBi5d0ipTdF7Tbieejw== +-----END CERTIFICATE----- + +Cybertrust Global Root +====================== +-----BEGIN CERTIFICATE----- +MIIDoTCCAomgAwIBAgILBAAAAAABD4WqLUgwDQYJKoZIhvcNAQEFBQAwOzEYMBYGA1UEChMPQ3li +ZXJ0cnVzdCwgSW5jMR8wHQYDVQQDExZDeWJlcnRydXN0IEdsb2JhbCBSb290MB4XDTA2MTIxNTA4 +MDAwMFoXDTIxMTIxNTA4MDAwMFowOzEYMBYGA1UEChMPQ3liZXJ0cnVzdCwgSW5jMR8wHQYDVQQD +ExZDeWJlcnRydXN0IEdsb2JhbCBSb290MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA ++Mi8vRRQZhP/8NN57CPytxrHjoXxEnOmGaoQ25yiZXRadz5RfVb23CO21O1fWLE3TdVJDm71aofW +0ozSJ8bi/zafmGWgE07GKmSb1ZASzxQG9Dvj1Ci+6A74q05IlG2OlTEQXO2iLb3VOm2yHLtgwEZL +AfVJrn5GitB0jaEMAs7u/OePuGtm839EAL9mJRQr3RAwHQeWP032a7iPt3sMpTjr3kfb1V05/Iin +89cqdPHoWqI7n1C6poxFNcJQZZXcY4Lv3b93TZxiyWNzFtApD0mpSPCzqrdsxacwOUBdrsTiXSZT +8M4cIwhhqJQZugRiQOwfOHB3EgZxpzAYXSUnpQIDAQABo4GlMIGiMA4GA1UdDwEB/wQEAwIBBjAP +BgNVHRMBAf8EBTADAQH/MB0GA1UdDgQWBBS2CHsNesysIEyGVjJez6tuhS1wVzA/BgNVHR8EODA2 +MDSgMqAwhi5odHRwOi8vd3d3Mi5wdWJsaWMtdHJ1c3QuY29tL2NybC9jdC9jdHJvb3QuY3JsMB8G +A1UdIwQYMBaAFLYIew16zKwgTIZWMl7Pq26FLXBXMA0GCSqGSIb3DQEBBQUAA4IBAQBW7wojoFRO +lZfJ+InaRcHUowAl9B8Tq7ejhVhpwjCt2BWKLePJzYFa+HMjWqd8BfP9IjsO0QbE2zZMcwSO5bAi +5MXzLqXZI+O4Tkogp24CJJ8iYGd7ix1yCcUxXOl5n4BHPa2hCwcUPUf/A2kaDAtE52Mlp3+yybh2 +hO0j9n0Hq0V+09+zv+mKts2oomcrUtW3ZfA5TGOgkXmTUg9U3YO7n9GPp1Nzw8v/MOx8BLjYRB+T +X3EJIrduPuocA06dGiBh+4E37F78CkWr1+cXVdCg6mCbpvbjjFspwgZgFJ0tl0ypkxWdYcQBX0jW +WL1WMRJOEcgh4LMRkWXbtKaIOM5V +-----END CERTIFICATE----- diff --git a/source/n/curl/curl.SlackBuild b/source/n/curl/curl.SlackBuild index 5775024a6..1249dcb82 100755 --- a/source/n/curl/curl.SlackBuild +++ b/source/n/curl/curl.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=7.19.6 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo curl-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) @@ -43,6 +52,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/n/dhcp/dhclient-script.PATH.diff b/source/n/dhcp/dhclient-script.PATH.diff new file mode 100644 index 000000000..5dfe9f09c --- /dev/null +++ b/source/n/dhcp/dhclient-script.PATH.diff @@ -0,0 +1,13 @@ +diff -Nur dhcp-4.1.1.orig//client/scripts/linux dhcp-4.1.1/client/scripts/linux +--- dhcp-4.1.1.orig//client/scripts/linux 2009-04-21 09:21:09.000000000 -0500 ++++ dhcp-4.1.1/client/scripts/linux 2010-03-03 09:14:33.261713322 -0600 +@@ -22,6 +22,9 @@ + # 4. TIMEOUT not tested. ping has a flag I don't know, and I'm suspicious + # of the $1 in its args. + ++PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin ++export PATH ++ + # 'ip' just looks too weird. /sbin/ip looks less weird. + ip=/sbin/ip + diff --git a/source/n/dhcp/dhcp.SlackBuild b/source/n/dhcp/dhcp.SlackBuild index 10c211ce2..6baf041a7 100755 --- a/source/n/dhcp/dhcp.SlackBuild +++ b/source/n/dhcp/dhcp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,22 +20,38 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.1.2p1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} + +VERSION=${VERSION:-$(echo dhcp-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-dhcp if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -43,27 +59,55 @@ mkdir -p $TMP $PKG cd $TMP rm -rf dhcp-$VERSION -tar xvf $CWD/dhcp-$VERSION.tar.gz || exit 1 +tar xvf $CWD/dhcp-$VERSION.tar.?z* || exit 1 cd dhcp-$VERSION || exit 1 -./configure -make DEBUG="$SLKCFLAGS" || exit 1 -make DEBUG="$SLKCFLAGS" install DESTDIR=$PKG || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Add PATH setting to /sbin/dhclient-script +zcat $CWD/dhclient-script.PATH.diff.gz | patch -p1 || exit 1 + +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --infodir=/usr/info \ + --mandir=/usr/man \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --docdir=/usr/doc/dhcp-$VERSION \ + --build=$ARCH-slackware-linux \ + --with-srv-lease-file=/var/state/dhcp/dhcpd.leases \ + --with-srv6-lease-file=/var/state/dhcp/dhcpd6.leases \ + --with-cli-lease-file=/var/state/dhcp/dhclient.leases \ + --with-cli6-lease-file=/var/state/dhcp/dhclient6.leases +# Default pid dir is still /var/run, so no need to declare it + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# DHCP libraries need not be included, yet. +rm -rf $PKG/usr/{include,lib${LIBDIRSUFFIX}} + +# We need this in /sbin +mkdir -p $PKG/sbin +mv $PKG/usr/sbin/dhclient $PKG/sbin + +# Install the dhclient-script for linux +cat client/scripts/linux > $PKG/sbin/dhclient-script +chmod 700 $PKG/sbin/dhclient-script mkdir -p $PKG/var/state/dhcp -rm -f $PKG/var/state/dhcp/dhcpd.leases -touch $PKG/var/state/dhcp/dhcpd.leases.new - -rm -rf $PKG/usr/local - -mkdir -p $PKG/usr/doc/dhcp-$VERSION -cp -a \ - LICENSE README RELNOTES \ - $PKG/usr/doc/dhcp-$VERSION -mkdir -p $PKG/usr/doc/dhcp-$VERSION/examples -cp -a client/dhclient.conf server/dhcpd.conf \ - $PKG/usr/doc/dhcp-$VERSION/examples -chown -R root:root $PKG/usr/doc/dhcp-$VERSION +# The daemon should create these automatically as needed +#touch $PKG/var/state/dhcp/dhcpd.leases.new +#touch $PKG/var/state/dhcp/dhcpd6.leases.new +#touch $PKG/var/state/dhcp/dhclient.leases.new +#touch $PKG/var/state/dhcp/dhclient6.leases.new cat << EOF > $PKG/etc/dhcpd.conf.new # dhcpd.conf @@ -79,37 +123,35 @@ cat << EOF > $PKG/etc/dhclient.conf.new # EOF -cat client/scripts/linux > $PKG/sbin/dhclient-script -chmod 700 $PKG/sbin/dhclient-script - -gzip -9 $PKG/usr/man/man?/* -find $PKG/usr/man -type f -exec chmod 644 {} \; +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +mkdir -p $PKG/usr/doc/dhcp-$VERSION/examples +cp -a \ + LICENSE README RELNOTES \ + $PKG/usr/doc/dhcp-$VERSION +mv $PKG/etc/dhcpd.conf $PKG/etc/dhclient.conf \ + $PKG/usr/doc/dhcp-$VERSION/examples + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -cat << EOF > $PKG/install/doinst.sh -#!/bin/sh -config() { - NEW="\$1" - OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r \$OLD ]; then - mv \$NEW \$OLD - elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy - rm \$NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} -config etc/dhcpd.conf.new -config etc/dhclient.conf.new -config var/state/dhcp/dhcpd.leases.new -rm -f var/state/dhcp/dhcpd.leases.new -EOF +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh -# Build the package: cd $PKG /sbin/makepkg -l y -c n $TMP/dhcp-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/dhcp/doinst.sh b/source/n/dhcp/doinst.sh new file mode 100644 index 000000000..88d284f65 --- /dev/null +++ b/source/n/dhcp/doinst.sh @@ -0,0 +1,21 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/dhcpd.conf.new +config etc/dhclient.conf.new +#config var/state/dhcp/dhcpd.leases.new +#config var/state/dhcp/dhcpd6.leases.new +#config var/state/dhcp/dhclient.leases.new +#config var/state/dhcp/dhclient6.leases.new +#rm -f var/state/dhcp/*.leases.new + diff --git a/source/n/dhcpcd/50-ntp.conf.diff b/source/n/dhcpcd/50-ntp.conf.diff new file mode 100644 index 000000000..d86c299e2 --- /dev/null +++ b/source/n/dhcpcd/50-ntp.conf.diff @@ -0,0 +1,19 @@ +diff -Nur dhcpcd-5.1.0.orig/dhcpcd-hooks/50-ntp.conf dhcpcd-5.1.0/dhcpcd-hooks/50-ntp.conf +--- dhcpcd-5.1.0.orig/dhcpcd-hooks/50-ntp.conf 2009-09-02 15:21:11.000000000 -0500 ++++ dhcpcd-5.1.0/dhcpcd-hooks/50-ntp.conf 2009-09-12 00:36:04.447859980 -0500 +@@ -8,14 +8,8 @@ + # NTP_CONF=/usr/pkg/etc/ntpd.conf + # to use openntpd from pkgsrc instead of the system provided ntp. + +-# Detect OpenRC or BSD rc +-# Distributions may want to just have their command here instead of this +-if type rc-service >/dev/null 2>&1 && rc-service --exists ntpd; then +- ntpd_restart_cmd="rc-service ntpd -- -Ds restart" +-elif [ -x /etc/rc.d/ntpd ]; then ++if [ -x /etc/rc.d/ntpd ]; then + ntpd_restart_cmd="/etc/rc.d/ntpd status >/dev/null 2>&1 && /etc/rc.d/ntpd restart" +-elif [ -x /usr/local/etc/rc.d/ntpd ]; then +- ntpd_restart_cmd="/usr/local/etc/rc.d/ntpd status >/dev/null 2>&1 && /usr/local/etc/rc.d/ntpd restart" + fi + + ntp_conf_dir="$state_dir/ntp.conf" diff --git a/source/n/dhcpcd/dhcpcd.SlackBuild b/source/n/dhcpcd/dhcpcd.SlackBuild index 409118746..3ee95a902 100755 --- a/source/n/dhcpcd/dhcpcd.SlackBuild +++ b/source/n/dhcpcd/dhcpcd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,27 +21,44 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-3.2.3} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo dhcpcd-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-dhcpcd if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf dhcpcd-$VERSION -tar xvf $CWD/dhcpcd-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/dhcpcd-$VERSION.tar.?z* || exit 1 cd dhcpcd-$VERSION chown -R root:root . find . \ @@ -50,65 +67,49 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# This changes the default locations where *.pid and other files are -# written - instead of various locations, use /etc/dhcpc -# The latter directory was long traditional, and (more importantly) -# you can't be sure that /var is mounted yet when dhcpcd is invoked. -zcat $CWD/patches/config.h.diff.gz | patch -p1 || exit 1 - -# Fixup the sample dhcpcd.sh script to reflect our changes -zcat $CWD/patches/dhcpcd.sh.diff.gz | patch -p1 || exit 1 +# At this point, it should be safe to assume that /var will be mounted by the +# time dhcpcd is called, as all non-root local filesystems are mounted from +# /etc/rc.d/rc.S, and /var should not be on a network filesystem. As such, +# we'll use the FHS layout instead of putting things in /etc/dhcpc -# Fix a typo in the manpage -zcat $CWD/patches/dhcpcd.8.in.diff.gz | patch -p1 || exit 1 - -# Disable zeroconf support -# I'm not sure if this is necessary, to be honest. If we do this though, -# I think we'll want to edit the man page to remove references to it. -#sed -i 's%#define ENABLE_IPV4LL%#undef ENABLE_IPV4LL%' config.h - -# Fix segfaulting on x86_64. Apparently i?86 is more forgiving -#zcat $CWD/dhcpcd.vararg.diff.gz | patch -p1 --verbose || exit 1 +# Fixup the 50-ntp.conf hook with our init script location +zcat $CWD/50-ntp.conf.diff.gz | patch -p1 || exit 1 +# Yes, /lib/dhcpcd is correct, even on x86_64. CFLAGS="$SLKCFLAGS" \ - make INFODIR=/etc/dhcpc || exit 1 - -# We'll install this manually, as the only thing "make install" actually -# installs is the executable and the man page, and the man page goes to -# the wrong place :-) -mkdir -p $PKG/sbin -cp -a dhcpcd $PKG/sbin - -mkdir -p $PKG/usr/man/man8 -gzip -9c dhcpcd.8 > $PKG/usr/man/man8/dhcpcd.8.gz - -# This script (or its equivalent) has been installed non-executable for -# several dhcpcd releases leading me to believe this is intentional on the -# part of the developers. Indeed, the script is called a "sample" in the -# included comments, and there's been at least one security issue related -# to its use in the past, so it's probably a safer bet to not install it so -# that it works "out of the box". However, making it non-executable is not -# the best solution for this as it leads to error messages in the system -# logs which I hear about from time to time. Instead, we'll make it -# executable, but will give it a suffix of -sample so that dhcpcd won't -# attempt to run it unless the admin specifically configure it to do so. -# As far as I can tell it does nothing more than add some extra verbosity -# to the logs anyway, and rc.inet1 already does that. There's really no -# need that I can see to enable the script. -mkdir -p $PKG/etc/dhcpc -cp -a dhcpcd.sh $PKG/etc/dhcpc/dhcpcd.sh-sample -chmod 755 $PKG/etc/dhcpc/dhcpcd.sh-sample +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sbindir=/sbin \ + --sysconfdir=/etc \ + --dbdir=/var/lib/dhcpcd \ + --libexecdir=/lib/dhcpcd \ + --mandir=/usr/man \ + --with-hooks="50-ntp.conf 50-yp.conf" \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG HOOKSCRIPTS="50-ntp.conf 50-yp.conf" || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# Let's not clobber the config file +mv $PKG/etc/dhcpcd.conf $PKG/etc/dhcpcd.conf.new + +# Compress manpages +( cd $PKG/usr/man + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done +) + mkdir -p $PKG/usr/doc/dhcpcd-$VERSION cp -a README $PKG/usr/doc/dhcpcd-$VERSION zcat $CWD/COPYRIGHT.gz > $PKG/usr/doc/dhcpcd-$VERSION/COPYRIGHT mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG /sbin/makepkg -l y -c n $TMP/dhcpcd-$VERSION-$ARCH-$BUILD.txz - diff --git a/source/n/dhcpcd/dhcpcd.vararg.diff b/source/n/dhcpcd/dhcpcd.vararg.diff deleted file mode 100644 index b3ac81ca5..000000000 --- a/source/n/dhcpcd/dhcpcd.vararg.diff +++ /dev/null @@ -1,30 +0,0 @@ ---- dhcpcd-2.0.8.orig/src/logger.c 2008-11-07 00:10:23.000000000 +0000 -+++ dhcpcd-2.0.8/src/logger.c 2008-11-07 00:13:46.000000000 +0000 -@@ -46,21 +46,25 @@ - { - va_list p; - va_list p2; -+ va_list p3; - FILE *f = stderr; - - va_start(p, fmt); - va_copy(p2, p); -+ va_copy(p3, p); - /* The default to send debug to stderr is just WAY too much console noise, IMHO */ - if(!Daemonized && strcmp(syslog_level_msg[level],"Info")) { - f = stdout; - /* fprintf(f, "%s, ", syslog_level_msg[level]); */ - vfprintf(f, fmt, p); - fputc('\n', f); -- vsyslog(level, fmt, p); -+ vsyslog(level, fmt, p2); - } - if ( level <= LogLevel ) -- vsyslog(level, fmt, p2); -+ vsyslog(level, fmt, p3); - va_end(p); -+ va_end(p2); -+ va_end(p3); - } - - // vim: set ts=4 : diff --git a/source/n/dhcpcd/doinst.sh b/source/n/dhcpcd/doinst.sh new file mode 100644 index 000000000..a1a93b209 --- /dev/null +++ b/source/n/dhcpcd/doinst.sh @@ -0,0 +1,15 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/dhcpcd.conf.new + diff --git a/source/n/dhcpcd/patches/dhcpcd.8.in.diff b/source/n/dhcpcd/patches/dhcpcd.8.in.diff deleted file mode 100644 index 7486c769a..000000000 --- a/source/n/dhcpcd/patches/dhcpcd.8.in.diff +++ /dev/null @@ -1,12 +0,0 @@ -diff -Nur dhcpcd-3.2.3.orig/dhcpcd.8.in dhcpcd-3.2.3/dhcpcd.8.in ---- dhcpcd-3.2.3.orig/dhcpcd.8.in 2008-02-25 02:28:19.000000000 -0600 -+++ dhcpcd-3.2.3/dhcpcd.8.in 2009-03-06 19:36:02.207109931 -0600 -@@ -117,7 +117,7 @@ - up, down or new depending on the state of - .Nm . - .Nm --ignores the exist code of the script. -+ignores the exit code of the script. - .Ss Fine tuning - You can fine tune the behaviour of - .Nm diff --git a/source/n/dirmngr/dirmngr.SlackBuild b/source/n/dirmngr/dirmngr.SlackBuild index d893aeb3d..1fb2e89c0 100755 --- a/source/n/dirmngr/dirmngr.SlackBuild +++ b/source/n/dirmngr/dirmngr.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006-2009 Robby Workman, Northport, AL, USA -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=dirmngr -VERSION=1.0.3 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +PKGNAM=dirmngr +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -38,18 +47,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/pkg-$PRGNAM +PKG=$TMP/pkg-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -66,7 +78,7 @@ CXXFLAGS="$SLKCFLAGS" \ --localstatedir=/var \ --mandir=/usr/man \ --infodir=/usr/info \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --enable-static=no \ --enable-shared=yes \ --build=$ARCH-slackware-linux \ @@ -86,14 +98,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ rm $PKG/usr/info/dir gzip -9 $PKG/usr/info/* -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ ABOUT-NLS AUTHORS COPYING INSTALL NEWS README* THANKS TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/dnsmasq/dnsmasq.SlackBuild b/source/n/dnsmasq/dnsmasq.SlackBuild index 170cfab47..7b89d3efd 100755 --- a/source/n/dnsmasq/dnsmasq.SlackBuild +++ b/source/n/dnsmasq/dnsmasq.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.49 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo dnsmasq-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-dnsmasq @@ -34,7 +44,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf dnsmasq-$VERSION -tar xvf $CWD/dnsmasq-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/dnsmasq-$VERSION.tar.?*z || exit 1 cd dnsmasq-$VERSION || exit 1 chown -R root:root . find . \ @@ -45,6 +55,7 @@ find . \ zcat $CWD/dnsmasq.leasedir.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 +# Default CFLAGS are "-W -Wall -O2" - that's good enough. make $NUMJOBS all-i18n PREFIX=/usr MANDIR=/usr/man || exit 1 make install-i18n PREFIX=/usr DESTDIR=$PKG MANDIR=/usr/man || exit 1 chmod 0755 $PKG/usr/sbin/dnsmasq @@ -77,9 +88,17 @@ zcat $CWD/rc.dnsmasq.gz > $PKG/etc/rc.d/rc.dnsmasq.new mkdir -p $PKG/usr/doc/dnsmasq-$VERSION cp -a \ - CHANGELOG COPYING FAQ doc.html setup.html \ + COPYING FAQ doc.html setup.html \ $PKG/usr/doc/dnsmasq-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGELOG ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGELOG | head -n 1000 > $DOCSDIR/CHANGELOG + touch -r CHANGELOG $DOCSDIR/CHANGELOG +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/n/dnsmasq/dnsmasq.leasedir.diff b/source/n/dnsmasq/dnsmasq.leasedir.diff index d0a4dafd7..9fec6b439 100644 --- a/source/n/dnsmasq/dnsmasq.leasedir.diff +++ b/source/n/dnsmasq/dnsmasq.leasedir.diff @@ -1,17 +1,7 @@ ---- ./src/config.h.orig 2009-02-05 06:14:24.000000000 -0600 -+++ ./src/config.h 2009-02-19 17:51:07.000000000 -0600 -@@ -45,7 +45,7 @@ - # elif defined(__sun__) || defined (__sun) - # define LEASEFILE "/var/cache/dnsmasq.leases" - # else --# define LEASEFILE "/var/lib/misc/dnsmasq.leases" -+# define LEASEFILE "/var/state/dnsmasq/dnsmasq.leases" - # endif - #endif - ---- ./dnsmasq.conf.example.orig 2009-01-03 14:28:51.000000000 -0600 -+++ ./dnsmasq.conf.example 2009-02-19 17:50:29.000000000 -0600 -@@ -381,7 +381,7 @@ +diff -Nur dnsmasq-2.52.orig/dnsmasq.conf.example dnsmasq-2.52/dnsmasq.conf.example +--- dnsmasq-2.52.orig/dnsmasq.conf.example 2009-11-25 06:55:16.000000000 -0600 ++++ dnsmasq-2.52/dnsmasq.conf.example 2010-01-22 15:32:41.137807274 -0600 +@@ -415,7 +415,7 @@ # The DHCP server needs somewhere on disk to keep its lease database. # This defaults to a sane location, but if you want to change it, use # the line below. @@ -20,3 +10,15 @@ # Set the DHCP server to authoritative mode. In this mode it will barge in # and take over the lease for any client which broadcasts on the network, +diff -Nur dnsmasq-2.52.orig/src/config.h dnsmasq-2.52/src/config.h +--- dnsmasq-2.52.orig/src/config.h 2010-01-21 08:22:06.000000000 -0600 ++++ dnsmasq-2.52/src/config.h 2010-01-22 15:32:41.136833058 -0600 +@@ -47,7 +47,7 @@ + # elif defined(__sun__) || defined (__sun) + # define LEASEFILE "/var/cache/dnsmasq.leases" + # else +-# define LEASEFILE "/var/lib/misc/dnsmasq.leases" ++# define LEASEFILE "/var/state/dnsmasq/dnsmasq.leases" + # endif + #endif + diff --git a/source/n/dnsmasq/doinst.sh b/source/n/dnsmasq/doinst.sh index 5a1ca426a..9aadc3e55 100644 --- a/source/n/dnsmasq/doinst.sh +++ b/source/n/dnsmasq/doinst.sh @@ -1,16 +1,26 @@ config() { NEW="$1" - OLD="`dirname $NEW`/`basename $NEW .new`" + OLD="$(dirname $NEW)/$(basename $NEW .new)" # If there's no config file by that name, mv it over: if [ ! -r $OLD ]; then mv $NEW $OLD - elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy rm $NEW fi # Otherwise, we leave the .new copy for the admin to consider... } +preserve_perms() { + NEW="$1" + OLD="$(dirname ${NEW})/$(basename ${NEW} .new)" + if [ -e ${OLD} ]; then + cp -a ${OLD} ${NEW}.incoming + cat ${NEW} > ${NEW}.incoming + mv ${NEW}.incoming ${NEW} + fi + config ${NEW} +} config etc/dnsmasq.conf.new -config etc/rc.d/rc.dnsmasq.new +preserve_perms etc/rc.d/rc.dnsmasq.new # This should be mostly useless... rm -f etc/rc.d/rc.dnsmasq.new diff --git a/source/n/epic4/epic4.SlackBuild b/source/n/epic5/epic5.SlackBuild index 0143b6eb2..fb7aa1fdd 100755 --- a/source/n/epic4/epic4.SlackBuild +++ b/source/n/epic5/epic5.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.8 -HELPFILE=20070509 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=1.1.2 +EPICVER=5 +HELPFILE=current +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -33,18 +43,20 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-epic4 +PKG=$TMP/package-epic${EPICVER} rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf epic4-$VERSION -tar xvf $CWD/epic4-$VERSION.tar.bz2 || exit 1 -cd epic4-$VERSION || exit 1 +rm -rf epic${EPICVER}-$VERSION +tar xvf $CWD/epic${EPICVER}-$VERSION.tar.?z* || exit 1 +cd epic${EPICVER}-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -60,19 +72,26 @@ CFLAGS="$SLKCFLAGS" \ make $NUMJOBS || make || exit 1 make install IP=$PKG || exit 1 -( cd $PKG/usr/share/epic - tar xvf $CWD/epic4-help-${HELPFILE}.tar.bz2 || exit 1 +( cd $PKG/usr/share/epic${EPICVER} + tar xvf $CWD/epic-help-${HELPFILE}.tar.?z* || exit 1 chown -R root:root . ) || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/epic4-$VERSION +mkdir -p $PKG/usr/doc/epic${EPICVER}-$VERSION cp -a \ BUG_FORM COPYRIGHT INSTALL KNOWNBUGS README* UPDATES VOTES doc \ - $PKG/usr/doc/epic4-$VERSION -rm -f $PKG/usr/doc/epic4-$VERSION/doc/*.1 + $PKG/usr/doc/epic${EPICVER}-$VERSION +rm -f $PKG/usr/doc/epic${EPICVER}-$VERSION/doc/*.1 + +# This is way too much. See the source if you care. +if [ -r UPDATES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat UPDATES | head -n 1000 > $DOCSDIR/UPDATES + touch -r UPDATES $DOCSDIR/UPDATES +fi gzip -9 $PKG/usr/man/man?/*.? @@ -84,5 +103,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/epic4-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/epic${EPICVER}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/epic4/slack-desc b/source/n/epic5/slack-desc index c17b4b549..43cb81a36 100644 --- a/source/n/epic4/slack-desc +++ b/source/n/epic5/slack-desc @@ -6,14 +6,14 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -epic4: epic4 (Internet Relay Chat client) -epic4: -epic4: EPIC is the (E)nhanced (P)rogrammable (I)RC-II (C)lient. -epic4: -epic4: The EPIC home page is: http://www.epicsol.org/ -epic4: The EPIC main ftp site is: ftp://ftp.epicsol.org/ -epic4: The EPIC IRC channel is: #epic on EFNet -epic4: -epic4: -epic4: -epic4: +epic5: epic5 (Internet Relay Chat client) +epic5: +epic5: EPIC is the (E)nhanced (P)rogrammable (I)RC-II (C)lient. +epic5: +epic5: The EPIC home page is: http://www.epicsol.org/ +epic5: The EPIC main ftp site is: ftp://ftp.epicsol.org/ +epic5: The EPIC IRC channel is: #epic on EFNet +epic5: +epic5: +epic5: +epic5: diff --git a/source/n/ethtool/ethtool.SlackBuild b/source/n/ethtool/ethtool.SlackBuild index e485e8d31..ebe0919fd 100755 --- a/source/n/ethtool/ethtool.SlackBuild +++ b/source/n/ethtool/ethtool.SlackBuild @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=6 -ARCH=${ARCH:-x86_64} +VERSION=2.6.33 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-ethtool @@ -37,14 +46,16 @@ rm -rf ethtool-$VERSION tar xzf $CWD/ethtool-$VERSION.tar.gz || exit 1 cd ethtool-$VERSION || exit 1 chown -R root:root . -./configure --prefix=/usr +./configure \ + --prefix=/usr \ + --mandir=/usr/man make || exit 1 make install DESTDIR=$PKG strip $PKG/usr/sbin/ethtool gzip -9 $PKG/usr/man/man8/ethtool.8 mkdir -p $PKG/usr/doc/ethtool-$VERSION cp -a \ - AUTHORS COPYING ChangeLog NEWS README \ + AUTHORS COPYING* ChangeLog LICENSE NEWS README* \ $PKG/usr/doc/ethtool-$VERSION chmod 644 $PKG/usr/doc/ethtool-$VERSION/* diff --git a/source/n/fetchmail/fetchmail.SlackBuild b/source/n/fetchmail/fetchmail.SlackBuild index 11145cc9e..a69cef4d4 100755 --- a/source/n/fetchmail/fetchmail.SlackBuild +++ b/source/n/fetchmail/fetchmail.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,19 +20,32 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=6.3.11 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=fetchmail +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-fetchmail @@ -78,7 +91,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/fetchmail-$VERSION cp -a \ - ABOUT-NLS COPYING* FAQ FEATURES INSTALL NEWS NOTES README* TODO \ + ABOUT-NLS COPYING* FAQ FEATURES INSTALL NEWS* NOTES* README* TODO \ *.html contrib *.lsm \ $PKG/usr/doc/fetchmail-$VERSION diff --git a/source/n/getmail/getmail.SlackBuild b/source/n/getmail/getmail.SlackBuild index 14885943a..5a550bce6 100755 --- a/source/n/getmail/getmail.SlackBuild +++ b/source/n/getmail/getmail.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.11.0 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo getmail-*.tar.gz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-getmail diff --git a/source/n/gnupg/gnupg.SlackBuild b/source/n/gnupg/gnupg.SlackBuild index 9fab5b935..3a0a5b8ab 100755 --- a/source/n/gnupg/gnupg.SlackBuild +++ b/source/n/gnupg/gnupg.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.4.9 -ARCH=${ARCH:-x86_64} +VERSION=1.4.10 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) @@ -36,6 +45,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG @@ -78,6 +89,14 @@ cp -a \ ln -sf /usr/share/gnupg/FAQ . ln -sf /usr/share/gnupg/faq.html . ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Add slack-desc files: mkdir -p $PKG/install cat $CWD/slack-desc.gnupg > $PKG/install/slack-desc diff --git a/source/n/gnupg2/gnupg-2.0.14-encode-s2k.patch b/source/n/gnupg2/gnupg-2.0.14-encode-s2k.patch new file mode 100644 index 000000000..26c798ee6 --- /dev/null +++ b/source/n/gnupg2/gnupg-2.0.14-encode-s2k.patch @@ -0,0 +1,65 @@ +-----BEGIN PGP SIGNED MESSAGE----- +Hash: SHA1 +NotDashEscaped: You need GnuPG to verify this message + +#! /bin/sh +patch -p0 -f $* < $0 +exit $? + +agent/ +2010-01-26 Werner Koch <wk@g10code.com> + + * protect.c (do_encryption): Encode the s2kcount and do not use a + static value of 96. + +--- agent/protect.c (revision 5231) ++++ agent/protect.c (working copy) +@@ -360,19 +360,25 @@ + + in canoncical format of course. We use asprintf and %n modifier + and dummy values as placeholders. */ +- p = xtryasprintf +- ("(9:protected%d:%s((4:sha18:%n_8bytes_2:96)%d:%n%*s)%d:%n%*s)", +- (int)strlen (modestr), modestr, +- &saltpos, +- blklen, &ivpos, blklen, "", +- enclen, &encpos, enclen, ""); +- if (!p) +- { +- gpg_error_t tmperr = out_of_core (); +- xfree (iv); +- xfree (outbuf); +- return tmperr; +- } ++ { ++ char countbuf[35]; ++ ++ snprintf (countbuf, sizeof countbuf, "%lu", get_standard_s2k_count ()); ++ p = xtryasprintf ++ ("(9:protected%d:%s((4:sha18:%n_8bytes_%u:%s)%d:%n%*s)%d:%n%*s)", ++ (int)strlen (modestr), modestr, ++ &saltpos, ++ (unsigned int)strlen (countbuf), countbuf, ++ blklen, &ivpos, blklen, "", ++ enclen, &encpos, enclen, ""); ++ if (!p) ++ { ++ gpg_error_t tmperr = out_of_core (); ++ xfree (iv); ++ xfree (outbuf); ++ return tmperr; ++ } ++ } + *resultlen = strlen (p); + *result = (unsigned char*)p; + memcpy (p+saltpos, iv+2*blklen, 8); + +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v2.1.0-svn5201 (GNU/Linux) + +iJwEAQECAAYFAktmpLoACgkQU7Yg0BzgxjCj5wQAyZjQbZM77wdcXIgPgeLsG99W +esWR89/5VM34dY5tOG+McCAiA4/0hl6CYUkkK/394wcfUXbvbZYARPjJg5wMoZsG +VufEL+Uz+eLgkejYPVakOWzK00i7MHqDSjttOqHg0d8wSiy3LKk6CN6N19uPqxbI +/1Io5f3gcroLGfEZlN0= +=oP/V +-----END PGP SIGNATURE----- diff --git a/source/n/gnupg2/gnupg2.SlackBuild b/source/n/gnupg2/gnupg2.SlackBuild index 3f3b4ccf0..1faf1666d 100755 --- a/source/n/gnupg2/gnupg2.SlackBuild +++ b/source/n/gnupg2/gnupg2.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh -# Copyright 2006-2009 Robby Workman, Northport, AL, USA -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006-2010 Robby Workman, Northport, AL, USA +# Copyright 2007-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,13 +22,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAME=gnupg2 -VERSION=2.0.12 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +PKGNAM=gnupg2 +VERSION=${VERSION:-$(echo gnupg-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-gnupg @@ -42,6 +51,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -49,8 +61,11 @@ mkdir -p $TMP $PKG cd $TMP rm -rf gnupg-$VERSION -tar xvf $CWD/gnupg-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/gnupg-$VERSION.tar.?z* || exit 1 cd gnupg-$VERSION + +zcat $CWD/gnupg-2.0.14-encode-s2k.patch.gz | patch -p0 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -62,18 +77,21 @@ CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --sysconfdir=/etc \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --mandir=/usr/man \ --infodir=/usr/info \ --docdir=/usr/doc/gnupg2-$VERSION \ --program-prefix="" \ --program-suffix="" \ - --build=$ARCH-slackware-linux \ - --host=$ARCH-slackware-linux + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +# Create directory for global gpg.conf: +mkdir -p $PKG/etc/gnupg + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -114,14 +132,22 @@ mv Controlling-gpg_002dconnect_002dagent.html Controlling-gpg_connect_agent.html mv Agent-GET_005fPASSPHRASE.html Agent-GET_PASSPHRASE.html mv option-_002d_002dhomedir.html option-homedir.html mv PKCS_002315-Card.html PKCS-15-Card.html +mv option-_002d_002dexport_002downertrust.html option-export_ownertrust.html ) # Move html doc to the proper location mv $PKG/usr/doc/gnupg2-$VERSION/faq.html $PKG/usr/doc/gnupg2-$VERSION/html/ +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAME-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/gnutls/gnutls.SlackBuild b/source/n/gnutls/gnutls.SlackBuild index 0aea48b1c..34343b734 100755 --- a/source/n/gnutls/gnutls.SlackBuild +++ b/source/n/gnutls/gnutls.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Robby Workman (http://rlworkman.net) -# Copyright 2007, 2008, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=gnutls -VERSION=2.6.6 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=gnutls +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -38,31 +47,34 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -if [ -r $CWD/$PRGNAM-$VERSION.tar.gz ]; then - tar xf $CWD/$PRGNAM-$VERSION.tar.gz || exit 1 -elif [ -r $CWD/$PRGNAM-$VERSION.tar.bz2 ]; then - tar xf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -elif [ -r $CWD/$PRGNAM-$VERSION.tar.xz ]; then - tar xf $CWD/$PRGNAM-$VERSION.tar.xz || exit 1 -elif [ -r $CWD/$PRGNAM-$VERSION.tar.lzma ]; then - tar xf $CWD/$PRGNAM-$VERSION.tar.lzma || exit 1 +rm -rf $PKGNAM-$VERSION +if [ -r $CWD/$PKGNAM-$VERSION.tar.gz ]; then + tar xf $CWD/$PKGNAM-$VERSION.tar.gz || exit 1 +elif [ -r $CWD/$PKGNAM-$VERSION.tar.bz2 ]; then + tar xf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +elif [ -r $CWD/$PKGNAM-$VERSION.tar.xz ]; then + tar xf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 +elif [ -r $CWD/$PKGNAM-$VERSION.tar.lzma ]; then + tar xf $CWD/$PKGNAM-$VERSION.tar.lzma || exit 1 else exit 1 fi -cd $PRGNAM-$VERSION +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -99,14 +111,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ gzip -9 *.info* ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* THANKS \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n -p $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n -p $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/gpgme/gpgme.SlackBuild b/source/n/gpgme/gpgme.SlackBuild index 55afc5d74..a83c158d0 100755 --- a/source/n/gpgme/gpgme.SlackBuild +++ b/source/n/gpgme/gpgme.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006-2009 Robby Workman, Northport, AL, USA -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,25 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=gpgme -VERSION=1.1.8 -ARCH=${ARCH:-x86_64} +PKGNAM=gpgme +VERSION=1.2.0 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/pkg-$PRGNAM +PKG=$TMP/pkg-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -41,14 +50,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -76,14 +88,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ rm $PKG/usr/info/dir gzip -9 $PKG/usr/info/* -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - AUTHORS COPYING* INSTALL NEWS README THANKS TODO VERSION \ - $PKG/usr/doc/$PRGNAM-$VERSION + AUTHORS COPYING* INSTALL NEWS README* THANKS TODO VERSION \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/httpd/httpd.SlackBuild b/source/n/httpd/httpd.SlackBuild index 2cdce1d87..009537769 100755 --- a/source/n/httpd/httpd.SlackBuild +++ b/source/n/httpd/httpd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,11 +25,20 @@ PKGNAM=httpd -VERSION=${VERSION:-2.2.13} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-2.2.15} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -46,6 +55,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP diff --git a/source/n/iproute2/iproute2-2.6.33-fixup_dbpath_and_iptablespath.diff b/source/n/iproute2/iproute2-2.6.33-fixup_dbpath_and_iptablespath.diff new file mode 100644 index 000000000..fe5b1abc4 --- /dev/null +++ b/source/n/iproute2/iproute2-2.6.33-fixup_dbpath_and_iptablespath.diff @@ -0,0 +1,34 @@ +diff -Nur iproute2-2.6.33.orig//Makefile iproute2-2.6.33/Makefile +--- iproute2-2.6.33.orig//Makefile 2010-02-24 21:56:50.000000000 -0600 ++++ iproute2-2.6.33/Makefile 2010-02-24 23:00:52.614825494 -0600 +@@ -1,14 +1,14 @@ + DESTDIR=/usr/ + ROOTDIR=$(DESTDIR) +-LIBDIR=/usr/lib/ ++LIBDIR=@LIBDIR@ + SBINDIR=/sbin + CONFDIR=/etc/iproute2 +-DOCDIR=/share/doc/iproute2 +-MANDIR=/share/man ++DOCDIR=/doc/iproute2-@VERSION@ ++MANDIR=/man + ARPDDIR=/var/lib/arpd + + # Path to db_185.h include +-DBM_INCLUDE:=$(ROOTDIR)/usr/include ++DBM_INCLUDE:=$(ROOTDIR)/usr/include/db44 + + SHARED_LIBS = y + +diff -Nur iproute2-2.6.33.orig//include/iptables.h iproute2-2.6.33/include/iptables.h +--- iproute2-2.6.33.orig//include/iptables.h 2010-02-24 21:56:50.000000000 -0600 ++++ iproute2-2.6.33/include/iptables.h 2010-02-24 23:02:21.891841749 -0600 +@@ -5,7 +5,7 @@ + #include "libiptc/libiptc.h" + + #ifndef IPT_LIB_DIR +-#define IPT_LIB_DIR "/usr/local/lib/iptables" ++#define IPT_LIB_DIR "@LIBDIR@" + #endif + + #ifndef IPPROTO_SCTP diff --git a/source/n/iproute2/iproute2.SlackBuild b/source/n/iproute2/iproute2.SlackBuild index 2a97fd43d..d9e8622cd 100755 --- a/source/n/iproute2/iproute2.SlackBuild +++ b/source/n/iproute2/iproute2.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,20 @@ # Build this against 2.6.x kernel source and headers... -VERSION=2.6.29-1 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +VERSION=2.6.33 +BUILD=${BUILD:-1} + +#NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -36,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -49,16 +62,6 @@ rm -rf iproute2-$VERSION tar xvf $CWD/iproute2-$VERSION.tar.bz2 || exit 1 cd iproute2-$VERSION -# Fix up path to bdb -zcat $CWD/iproute2.dbpath.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -# Fix up iptables lib path -zcat $CWD/iproute2.iptablespath.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -if [ "$ARCH" = "x86_64" ]; then - sed -i -e "s#/lib/tc#/lib${LIBDIRSUFFIX}/tc#" $(grep -lr '/lib/tc' *) || exit 1 - sed -i -e "s#/usr/lib/#/usr/lib${LIBDIRSUFFIX}/#" include/iptables.h || exit 1 - sed -i -e "s#/usr/lib/#/usr/lib${LIBDIRSUFFIX}/#" tc/m_ipt.c || exit 1 -fi - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -66,14 +69,23 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -export CFLAGS="$SLKCFLAGS" -make $NUMJOBS DOCDIR=doc/iproute2-$VERSION MANDIR=man/ || exit 1 +# Fix up path to bdb and iptables libs +zcat $CWD/iproute2-2.6.33-fixup_dbpath_and_iptablespath.diff.gz | sed \ + -e "s,@LIBDIR@,/usr/lib${LIBDIRSUFFIX},g" \ + -e "s,@VERSION@,$VERSION,g" | patch -p1 || exit 1 + +# Use our custom SLKCFLAGS +sed -i "s/-O2 /-O2 -fPIC /" Makefile + +./configure # This is okay, really :-) +make $NUMJOBS || exit 1 -# This doesn't embed any $TMP or $PKG paths in anything -# Have a look at what the Makefile does for why :) mkdir -p $PKG/usr -make install DOCDIR=doc/iproute2-$VERSION MANDIR=man/ DESTDIR=$PKG/usr/ \ - || exit 1 +make install LIBDIR=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG/usr/ || exit 1 + +# I can't seem to make this go to the right place on x86_64, but all the +# relevant stuff looks correct :/ +[ "$ARCH" = "x86_64" ] && mv $PKG/usr/lib $PKG/usr/lib${LIBDIRSUFFIX} # This stuff has always been installed under /sbin rather than # /usr/sbin, as the latter could possibly be network-mounted, and @@ -96,6 +108,7 @@ done # Remove junk: [ -d $PKG/usr/usr ] && rm -r $PKG/usr/usr +[ -d $PKG/usr/var ] && rm -r $PKG/usr/var mkdir -p $PKG/var/lib/arpd diff --git a/source/n/iproute2/iproute2.dbpath.diff b/source/n/iproute2/iproute2.dbpath.diff deleted file mode 100644 index b6ad2b0f9..000000000 --- a/source/n/iproute2/iproute2.dbpath.diff +++ /dev/null @@ -1,12 +0,0 @@ -diff -Nur orig/Makefile new/Makefile ---- orig/Makefile 2008-07-25 15:46:07.000000000 -0500 -+++ new/Makefile 2008-10-03 20:32:41.237630954 -0500 -@@ -5,7 +5,7 @@ - MANDIR=/share/man - - # Path to db_185.h include --DBM_INCLUDE:=/usr/include -+DBM_INCLUDE:=/usr/include/db44 - - DEFINES= -DRESOLVE_HOSTNAMES -DDESTDIR=\"$(DESTDIR)\" - diff --git a/source/n/iproute2/iproute2.iptablespath.diff b/source/n/iproute2/iproute2.iptablespath.diff deleted file mode 100644 index 89f61b65d..000000000 --- a/source/n/iproute2/iproute2.iptablespath.diff +++ /dev/null @@ -1,12 +0,0 @@ -diff -Nur orig/include/iptables.h new/include/iptables.h ---- orig/include/iptables.h 2008-07-25 15:46:07.000000000 -0500 -+++ new/include/iptables.h 2008-10-03 20:35:56.731284537 -0500 -@@ -5,7 +5,7 @@ - #include "libiptc/libiptc.h" - - #ifndef IPT_LIB_DIR --#define IPT_LIB_DIR "/usr/local/lib/iptables" -+#define IPT_LIB_DIR "/usr/lib/iptables" - #endif - - #ifndef IPPROTO_SCTP diff --git a/source/n/iptables/iptables.SlackBuild b/source/n/iptables/iptables.SlackBuild index fcf80a1ab..a9dc37bd5 100755 --- a/source/n/iptables/iptables.SlackBuild +++ b/source/n/iptables/iptables.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,12 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.4.3.2 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo iptables-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-iptables @@ -33,19 +42,22 @@ PKG=$TMP/package-iptables if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf iptables-$VERSION -tar xvf $CWD/iptables-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/iptables-$VERSION.tar.?z* || exit 1 cd iptables-$VERSION chown -R root:root . find . \ diff --git a/source/n/iputils/iputils.SlackBuild b/source/n/iputils/iputils.SlackBuild index a5e3691a7..c7a77a4a9 100755 --- a/source/n/iputils/iputils.SlackBuild +++ b/source/n/iputils/iputils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,28 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=s20070202 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=s20100418 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + LIBDIRSUFFIX="64" +else + LIBDIRSUFFIX="" +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -37,8 +56,7 @@ cd $TMP rm -rf iputils-$VERSION tar xvf $CWD/iputils-$VERSION.tar.bz2 || exit 1 cd iputils-$VERSION || exit 1 -# Modern compiler... -sed -i -e "s/OPEN_MAX/NR_OPEN/" $(grep -lr OPEN_MAX *) + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -46,7 +64,7 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -make || exit 1 +make VPATH=/usr/lib${LIBDIRSUFFIX} || exit 1 ( cd doc ; make man || exit 1 ) || exit 1 strip arping clockdiff ping ping6 rarpd rdisc tracepath tracepath6 traceroute6 diff --git a/source/n/ipw2200-fw/ipw2200-fw.SlackBuild b/source/n/ipw2200-fw/ipw2200-fw.SlackBuild index 9aac28a68..e6c5a3141 100755 --- a/source/n/ipw2200-fw/ipw2200-fw.SlackBuild +++ b/source/n/ipw2200-fw/ipw2200-fw.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,9 @@ PKGNAM=ipw2200-fw -VERSION=${VERSION:-3.0} +VERSION=${VERSION:-3.1} ARCH=${ARCH:-fw} -BUILD=${BUILD:-2} +BUILD=${BUILD:-1} CWD=$(pwd) @@ -35,7 +35,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: diff --git a/source/n/irssi/irssi.SlackBuild b/source/n/irssi/irssi.SlackBuild index 828ab8748..367587973 100755 --- a/source/n/irssi/irssi.SlackBuild +++ b/source/n/irssi/irssi.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,11 +25,20 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-irssi -VERSION=0.8.14 -DIRCD=0.8.14 -ARCH=${ARCH:-x86_64} +VERSION=0.8.15 +DIRCD=0.8.15 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -41,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -57,8 +69,11 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Fix an error in the manual page -zcat $CWD/irsi-0.8.14.manpage_fix.diff.gz | patch -p1 || exit 1 +# Fix an error in the manual page: +zcat $CWD/irssi.manpage_fix.diff.gz | patch -p1 --verbose || exit 1 + +# Fix an SSL proxy bug in 0.8.15: +zcat $CWD/irssi.ssl_proxy.diff.gz | patch -p1 --verbose || exit 1 CFLAGS="$SLKCFLAGS" \ ./configure \ @@ -83,17 +98,9 @@ make install \ # This removes our DESTDIR from the packlist filenames, to keep perl's # internal inventories consistent and correct. find $PKG -name .packlist | while read plist ; do - sed -e "s%/share/man%/man%g" \ - -e "s%$PKG%%g" \ - -e "s%\.1$%\.1\.gz%g" \ - -e "s%\.2$%\.2\.gz%g" \ - -e "s%\.3$%\.3\.gz%g" \ - -e "s%\.3pm$%\.3pm\.gz%g" \ - -e "s%\.4$%\.4\.gz%g" \ - -e "s%\.5$%\.5\.gz%g" \ - -e "s%\.6$%\.6\.gz%g" \ - -e "s%\.7$%\.7\.gz%g" \ - -e "s%\.8$%\.8\.gz%g" \ + sed -e "s%$PKG%%g" \ + -e "s%/share/man%/man%g" \ + -re "s%\.([1-9]n?|3pm)$%&.gz%g # extend man filenames for .gz" \ ${plist} > ${plist}.new mv -f ${plist}.new ${plist} done @@ -126,6 +133,14 @@ cp -a \ $PKG/usr/doc/irssi-$VERSION ( cd $PKG/usr/doc/irssi-$VERSION ; ln -sf /usr/share/irssi/help . ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/n/irssi/irsi-0.8.14.manpage_fix.diff b/source/n/irssi/irssi.manpage_fix.diff index 2219652df..2219652df 100644 --- a/source/n/irssi/irsi-0.8.14.manpage_fix.diff +++ b/source/n/irssi/irssi.manpage_fix.diff diff --git a/source/n/irssi/irssi.ssl_proxy.diff b/source/n/irssi/irssi.ssl_proxy.diff new file mode 100644 index 000000000..401e07173 --- /dev/null +++ b/source/n/irssi/irssi.ssl_proxy.diff @@ -0,0 +1,24 @@ +Index: irssi-0.8.14/src/core/servers.c +=================================================================== +--- irssi-0.8.14.orig/src/core/servers.c ++++ irssi-0.8.14/src/core/servers.c +@@ -209,6 +209,7 @@ + char *errmsg2; + char ipaddr[MAX_IP_LEN]; + int port; ++ char *hostname; + + g_return_if_fail(ip != NULL || unix_socket != NULL); + +@@ -223,8 +224,10 @@ + server->connrec->own_ip4); + port = server->connrec->proxy != NULL ? + server->connrec->proxy_port : server->connrec->port; ++ hostname = server->connrec->proxy != NULL ? ++ server->connrec->proxy : server->connrec->address; + handle = server->connrec->use_ssl ? +- net_connect_ip_ssl(ip, port, server->connrec->address, own_ip, server->connrec->ssl_cert, server->connrec->ssl_pkey, ++ net_connect_ip_ssl(ip, port, hostname, own_ip, server->connrec->ssl_cert, server->connrec->ssl_pkey, + server->connrec->ssl_cafile, server->connrec->ssl_capath, server->connrec->ssl_verify) : + net_connect_ip(ip, port, own_ip); + } else { diff --git a/source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode.SlackBuild b/source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode.SlackBuild new file mode 100755 index 000000000..80db4c100 --- /dev/null +++ b/source/n/iwlwifi-1000-ucode/iwlwifi-1000-ucode.SlackBuild @@ -0,0 +1,57 @@ +#!/bin/sh + +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=iwlwifi-1000-ucode +#VERSION will be determined automatically, and the package will use the last version found. +ARCH=${ARCH:-fw} +BUILD=${BUILD:-1} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} + +rm -rf $PKG +mkdir -p $TMP $PKG + +cd $TMP +for file in $CWD/${PKGNAM}-*.tar.?z* ; do + VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - ) + rm -rf ${PKGNAM}-${VERSION} + tar xvf $file || exit 1 + cd ${PKGNAM}-$VERSION || exit 1 + # Make sure ownerships and permissions are sane: + chown -R root:root . + chmod 644 * + # install: + mkdir -p $PKG/lib/firmware + cp -a iwlwifi-*.ucode $PKG/lib/firmware + # Add a documentation directory: + mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION} + cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION} +done + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/n/iwlwifi-1000-ucode/slack-desc b/source/n/iwlwifi-1000-ucode/slack-desc new file mode 100644 index 000000000..e0c939e8c --- /dev/null +++ b/source/n/iwlwifi-1000-ucode/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +iwlwifi-1000-ucode: iwlwifi-1000-ucode (Intel 1000 wireless microcode) +iwlwifi-1000-ucode: +iwlwifi-1000-ucode: The microcode provided in this package is required for the Intel +iwlwifi-1000-ucode: Wireless WiFi Link AGN driver for Linux (iwlagn) to operate. +iwlwifi-1000-ucode: +iwlwifi-1000-ucode: Visit Intel's Linux wireless website at this address: +iwlwifi-1000-ucode: http://intellinuxwireless.org/ +iwlwifi-1000-ucode: +iwlwifi-1000-ucode: +iwlwifi-1000-ucode: +iwlwifi-1000-ucode: diff --git a/source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode.SlackBuild b/source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode.SlackBuild new file mode 100755 index 000000000..251f7e619 --- /dev/null +++ b/source/n/iwlwifi-6000-ucode/iwlwifi-6000-ucode.SlackBuild @@ -0,0 +1,57 @@ +#!/bin/sh + +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=iwlwifi-6000-ucode +#VERSION will be determined automatically, and the package will use the last version found. +ARCH=${ARCH:-fw} +BUILD=${BUILD:-1} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} + +rm -rf $PKG +mkdir -p $TMP $PKG + +cd $TMP +for file in $CWD/${PKGNAM}-*.tar.?z* ; do + VERSION=$(echo $file | rev | cut -f 3- -d . | cut -f 1 -d / | rev | cut -f 4- -d - ) + rm -rf ${PKGNAM}-${VERSION} + tar xvf $file || exit 1 + cd ${PKGNAM}-$VERSION || exit 1 + # Make sure ownerships and permissions are sane: + chown -R root:root . + chmod 644 * + # install: + mkdir -p $PKG/lib/firmware + cp -a iwlwifi-*.ucode $PKG/lib/firmware + # Add a documentation directory: + mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION} + cp -a LICENSE* README* $PKG/usr/doc/${PKGNAM}-${VERSION} +done + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/n/iwlwifi-6000-ucode/slack-desc b/source/n/iwlwifi-6000-ucode/slack-desc new file mode 100644 index 000000000..50d56c38f --- /dev/null +++ b/source/n/iwlwifi-6000-ucode/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +iwlwifi-6000-ucode: iwlwifi-6000-ucode (Intel 6000 wireless microcode) +iwlwifi-6000-ucode: +iwlwifi-6000-ucode: The microcode provided in this package is required for the Intel +iwlwifi-6000-ucode: Wireless WiFi Link AGN driver for Linux (iwlagn) to operate. +iwlwifi-6000-ucode: +iwlwifi-6000-ucode: Visit Intel's Linux wireless website at this address: +iwlwifi-6000-ucode: http://intellinuxwireless.org/ +iwlwifi-6000-ucode: +iwlwifi-6000-ucode: +iwlwifi-6000-ucode: +iwlwifi-6000-ucode: diff --git a/source/n/lftp/lftp.SlackBuild b/source/n/lftp/lftp.SlackBuild index 82b42993b..9e75153a6 100755 --- a/source/n/lftp/lftp.SlackBuild +++ b/source/n/lftp/lftp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.7.14 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo lftp-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-lftp @@ -40,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -61,7 +73,9 @@ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --localstatedir=/var \ --mandir=/usr/man \ + --infodir=/usr/info \ --docdir=/usr/doc/lftp-$VERSION \ --with-openssl \ --build=${ARCH}-slackware-linux @@ -91,10 +105,18 @@ fi mkdir -p $PKG/usr/doc/lftp-$VERSION cp -a \ - ABOUT-NLS BUGS COPYING* ChangeLog FAQ FEATURES INSTALL MIRRORS NEWS \ + BUGS COPYING* FAQ FEATURES INSTALL MIRRORS NEWS \ README* THANKS TODO lftp.lsm \ $PKG/usr/doc/lftp-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/n/libassuan/libassuan.SlackBuild b/source/n/libassuan/libassuan.SlackBuild index 32cf41723..6d49096f1 100755 --- a/source/n/libassuan/libassuan.SlackBuild +++ b/source/n/libassuan/libassuan.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006-2007 Robby Workman (http://rlworkman.net) -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,15 +21,25 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SCRIPT, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=libassuan -VERSION=1.0.4 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=libassuan +VERSION=1.0.5 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/pkg-$PRGNAM +PKG=$TMP/pkg-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -40,14 +50,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -73,15 +86,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ gzip -9 $PKG/usr/info/*.info rm -rf $PKG/usr/info/dir -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - AUTHORS COPYING INSTALL NEWS README* THANKS TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION -cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + AUTHORS COPYING* INSTALL NEWS README* THANKS TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/libgcrypt/libgcrypt.SlackBuild b/source/n/libgcrypt/libgcrypt.SlackBuild index bb4723948..720314cac 100755 --- a/source/n/libgcrypt/libgcrypt.SlackBuild +++ b/source/n/libgcrypt/libgcrypt.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006-2009 Robby Workman, Northport, AL, USA -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,16 +22,25 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=libgcrypt -VERSION=${VERSION:-1.4.4} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +PKGNAM=libgcrypt +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/pkg-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,14 +51,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -74,21 +86,39 @@ CXXFLAGS="$SLKCFLAGS" \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG +# Move the shared library to $PKG/lib${LIBDIRSUFFIX}: +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + for file in lib*.so.??.* ; do + mv $file ../../lib${LIBDIRSUFFIX} + ln -sf ../../lib${LIBDIRSUFFIX}/$file . + done + cp -a lib*.so.?? ../../lib${LIBDIRSUFFIX} +) + find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null rm -f $PKG/usr/info/dir gzip -9 $PKG/usr/info/* -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS BUGS COPYING* ChangeLog INSTALL NEWS \ - README README.SVN THANKS TODO VERSION \ - $PKG/usr/doc/$PRGNAM-$VERSION + README* THANKS TODO VERSION \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/libgpg-error/libgpg-error.SlackBuild b/source/n/libgpg-error/libgpg-error.SlackBuild index 62f1df43b..4d0384afe 100755 --- a/source/n/libgpg-error/libgpg-error.SlackBuild +++ b/source/n/libgpg-error/libgpg-error.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006, 2009 Robby Workman, Northport, AL, USA -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,16 +22,25 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=libgpg-error -VERSION=1.7 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +PKGNAM=libgpg-error +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,14 +51,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -63,7 +75,7 @@ CXXFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --infodir=/usr/info \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --enable-shared=yes \ --enable-static=yes \ --build=$ARCH-slackware-linux \ @@ -72,17 +84,35 @@ CXXFLAGS="$SLKCFLAGS" \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG +# Move the shared library to $PKG/lib${LIBDIRSUFFIX}: +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + for file in lib*.so.?.* ; do + mv $file ../../lib${LIBDIRSUFFIX} + ln -sf ../../lib${LIBDIRSUFFIX}/$file . + done + cp -a lib*.so.? ../../lib${LIBDIRSUFFIX} +) + find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README THANKS VERSION \ - $PKG/usr/doc/$PRGNAM-$VERSION + ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* THANKS VERSION \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/libksba/libksba.SlackBuild b/source/n/libksba/libksba.SlackBuild index 0b42f53f8..5cbc4093a 100755 --- a/source/n/libksba/libksba.SlackBuild +++ b/source/n/libksba/libksba.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006,2009 Robby Workman, Northport, AL, USA -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,25 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SCRIPT, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=libksba -VERSION=1.0.6 -ARCH=${ARCH:-x86_64} +PKGNAM=libksba +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/pkg-$PRGNAM +PKG=$TMP/pkg-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -41,14 +50,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -64,7 +76,7 @@ CXXFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --localstatedir=/var \ --infodir=/usr/info \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --enable-shared=yes \ --enable-static=no \ --build=$ARCH-slackware-linux \ @@ -79,14 +91,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ rm -f $PKG/usr/info/dir gzip -9 $PKG/usr/info/* -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - AUTHORS COPYING INSTALL NEWS README THANKS TODO VERSION \ - $PKG/usr/doc/$PRGNAM-$VERSION + AUTHORS COPYING* INSTALL NEWS README* THANKS TODO VERSION \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/links/links.SlackBuild b/source/n/links/links.SlackBuild index fd55faea5..c8839ebd0 100755 --- a/source/n/links/links.SlackBuild +++ b/source/n/links/links.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.2 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=2.3pre1 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-links @@ -35,6 +45,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG @@ -80,6 +92,14 @@ find $PKG/usr/doc/links-$VERSION -type f -exec chmod 644 {} \; find $PKG/usr/doc/links-$VERSION -type d -exec chmod 755 {} \; chmod 0755 $PKG/usr/doc/links-$VERSION/mailcap.pl +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/n/lynx/lynx.SlackBuild b/source/n/lynx/lynx.SlackBuild index 109c89621..5a298547d 100755 --- a/source/n/lynx/lynx.SlackBuild +++ b/source/n/lynx/lynx.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,33 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -SRCVER=2.8.6rel.5 -PKGVER=2.8.6rel.5 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +SRCVER=2.8.7 +PKGVER=2.8.7 +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} -if [ "$ARCH" = "x86_64" ]; then +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" else + SLKCFLAGS="-O2" LIBDIRSUFFIX="" fi @@ -39,24 +56,13 @@ TMP=${TMP:-/tmp} PKG=$TMP/package-lynx rm -rf $PKG -mkdir -p $PKG -# Add libdir to package: -mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/lynx - +mkdir -p $TMP $PKG/usr/lib${LIBDIRSUFFIX}/lynx cd $TMP -rm -rf lynx2-8-6 -tar xvf $CWD/lynx${SRCVER}.tar.bz2 || exit 1 -cd lynx2-8-6 -# Fix /usr/local paths: -zcat $CWD/lynx.path.diff.gz | sed -e "s#usr/lib/#usr/lib${LIBDIRSUFFIX}/#g" | patch -p1 --verbose || exit 1 -# Apply recolorizing patch: -zcat $CWD/lynx.cfg.diff.gz | patch -p1 --verbose --backup || exit 1 +rm -rf lynx2-8-7 +tar xvf $CWD/lynx${SRCVER}.tar.?z* || exit 1 +cd lynx2-8-7 -## Apply official patches: -#zcat $CWD/2.8.5rel.4.patch.gz | patch -p1 --verbose || exit -#zcat $CWD/2.8.5rel.5.patch.gz | patch -p1 --verbose || exit - -find . -name "*~" | xargs rm +find . -name "*~" -exec rm -f {} \; chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -64,6 +70,15 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Fix /usr/local paths and libdir paths +zcat $CWD/lynx.path.diff.gz | \ + sed -e "s#@SLACK_LIBDIR@#/usr/lib${LIBDIRSUFFIX}/#g" | \ + patch -p1 --verbose || exit 1 + +# Apply recolorizing patch: +zcat $CWD/lynx.cfg.diff.gz | patch -p1 --verbose --backup || exit 1 + +CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --sysconfdir=/etc \ @@ -121,6 +136,14 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ ln -sf /usr/share/lynx/lynx_help . ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + gzip -9 $PKG/usr/man/man?/*.? mkdir -p $PKG/install diff --git a/source/n/lynx/lynx.cfg.diff b/source/n/lynx/lynx.cfg.diff index 4a52fcc5b..c7ab6257f 100644 --- a/source/n/lynx/lynx.cfg.diff +++ b/source/n/lynx/lynx.cfg.diff @@ -1,6 +1,7 @@ ---- ./lynx.cfg.orig Tue Feb 26 23:18:35 2002 -+++ ./lynx.cfg Tue Feb 26 23:24:09 2002 -@@ -2841,8 +2841,18 @@ +diff -Nur lynx2-8-7.orig/lynx.cfg lynx2-8-7/lynx.cfg +--- lynx2-8-7.orig/lynx.cfg 2009-06-23 18:53:58.000000000 -0500 ++++ lynx2-8-7/lynx.cfg 2009-12-03 15:35:18.744461098 -0600 +@@ -3025,8 +3025,18 @@ #COLOR:4:magenta:white #COLOR:5:blue:white #COLOR:6:red:white @@ -19,4 +20,4 @@ +COLOR:7:magenta:cyan - .h2 ASSUMED_COLOR + .h2 COLOR_STYLE diff --git a/source/n/lynx/lynx.path.diff b/source/n/lynx/lynx.path.diff index 1ee216edf..045405c95 100644 --- a/source/n/lynx/lynx.path.diff +++ b/source/n/lynx/lynx.path.diff @@ -1,6 +1,7 @@ ---- ./userdefs.h.orig Tue Feb 26 22:32:08 2002 -+++ ./userdefs.h Tue Feb 26 22:39:53 2002 -@@ -277,7 +277,7 @@ +diff -Nur lynx2-8-7.orig/userdefs.h lynx2-8-7/userdefs.h +--- lynx2-8-7.orig/userdefs.h 2009-06-06 19:30:35.000000000 -0500 ++++ lynx2-8-7/userdefs.h 2009-12-03 15:47:54.596486242 -0600 +@@ -289,7 +289,7 @@ #ifdef DOSPATH #define LYNX_CFG_FILE "./lynx.cfg" #else @@ -9,30 +10,30 @@ #endif /* DOSPATH */ #endif /* LYNX_CFG_FILE */ #endif /* HAVE_CONFIG_H */ -@@ -289,7 +289,7 @@ +@@ -305,7 +305,7 @@ * Mappings in these global and personal files override any SUFFIX * definitions in lynx.cfg and built-in defaults from src/HTInit.c. */ --#define GLOBAL_EXTENSION_MAP "/usr/local/lib/mosaic/mime.types" -+#define GLOBAL_EXTENSION_MAP "/usr/lib/lynx/mime.types" - #define PERSONAL_EXTENSION_MAP ".mime.types" +-#define GLOBAL_EXTENSION_MAP MIME_LIBDIR "mime.types" ++#define GLOBAL_EXTENSION_MAP "@SLACK_LIBDIR@/lynx/mime.types" + #define PERSONAL_EXTENSION_MAP "~/.mime.types" /************************** -@@ -299,7 +299,7 @@ +@@ -315,7 +315,7 @@ * Mappings in these global and personal files override any VIEWER * definitions in lynx.cfg and built-in defaults from src/HTInit.c. */ --#define GLOBAL_MAILCAP "/usr/local/lib/mosaic/mailcap" -+#define GLOBAL_MAILCAP "/usr/lib/lynx/mailcap" - #define PERSONAL_MAILCAP ".mailcap" +-#define GLOBAL_MAILCAP MIME_LIBDIR "mailcap" ++#define GLOBAL_MAILCAP MIME_LIBDIR "/etc/mailcap" + #define PERSONAL_MAILCAP "~/.mailcap" /************************** -@@ -434,7 +434,7 @@ +@@ -445,7 +445,7 @@ * -lss command line switch will override these definitions. */ #ifndef LYNX_LSS_FILE -#define LYNX_LSS_FILE "/usr/local/lib/lynx.lss" -+#define LYNX_LSS_FILE "/usr/lib/lynx/lynx.lss" ++#define LYNX_LSS_FILE "/etc/lynx.lss" #endif /* LYNX_LSS_FILE */ #endif /* VMS OR UNIX */ diff --git a/source/n/mcabber/mcabber.SlackBuild b/source/n/mcabber/mcabber.SlackBuild index f23c3bef4..db46ac67a 100755 --- a/source/n/mcabber/mcabber.SlackBuild +++ b/source/n/mcabber/mcabber.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,20 @@ PKGNAM=mcabber -VERSION=${VERSION:-0.9.9} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -37,15 +45,21 @@ mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -60,6 +74,7 @@ find . \ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ @@ -93,13 +108,21 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING* ChangeLog NEWS README* TODO mcabberrc.example \ + AUTHORS COPYING* NEWS README* TODO mcabberrc.example \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install #zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/mtr/mtr-0.73.configure.error.diff b/source/n/mtr/mtr-0.73.configure.error.diff deleted file mode 100644 index 896a5216d..000000000 --- a/source/n/mtr/mtr-0.73.configure.error.diff +++ /dev/null @@ -1,20 +0,0 @@ ---- ./configure.orig 2008-04-07 11:32:49.000000000 -0500 -+++ ./configure 2008-07-24 12:57:20.000000000 -0500 -@@ -6737,17 +6737,6 @@ - - - rm -f conf.gtktest -- -- else -- AM_PATH_GTK(1.0.0, CFLAGS="$CFLAGS $GTK_CFLAGS" -- LIBS="$LIBS $GTK_LIBS", -- { echo "$as_me:$LINENO: WARNING: Building without GTK+ display support" >&5 --echo "$as_me: WARNING: Building without GTK+ display support" >&2;} -- cat >>confdefs.h <<\_ACEOF --#define NO_GTK 1 --_ACEOF -- -- GTK_OBJ="") - fi - else - cat >>confdefs.h <<\_ACEOF diff --git a/source/n/mtr/mtr.SlackBuild b/source/n/mtr/mtr.SlackBuild index 91ed7be9d..4f53c5876 100755 --- a/source/n/mtr/mtr.SlackBuild +++ b/source/n/mtr/mtr.SlackBuild @@ -22,10 +22,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=mtr -VERSION=0.73 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=mtr +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -35,19 +44,20 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf ${PRGNAM}-${VERSION} -tar xvf $CWD/${PRGNAM}-${VERSION}.tar.bz2 || exit 1 -cd ${PRGNAM}-${VERSION} || exit 1 -zcat $CWD/mtr-0.73.configure.error.diff.gz | patch -p1 --verbose || exit 1 +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-${VERSION}.tar.?z* || exit 1 +cd ${PKGNAM}-${VERSION} || exit 1 chown -R root.root * find . \ @@ -70,11 +80,19 @@ make DESTDIR=$PKG install || exit 1 chmod -s $PKG/usr/sbin/mtr -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* FORMATS INSTALL NEWS README* SECURITY TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION -chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/* + $PKG/usr/doc/$PKGNAM-$VERSION +chmod -R a-w $PKG/usr/doc/$PKGNAM-$VERSION/* + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi # Compress the man page(s) find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; @@ -88,5 +106,6 @@ cat $CWD/slack-desc > $PKG/install/slack-desc # Build the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/n/ncftp/ncftp.SlackBuild b/source/n/ncftp/ncftp.SlackBuild index 81cc729a6..f859b0878 100755 --- a/source/n/ncftp/ncftp.SlackBuild +++ b/source/n/ncftp/ncftp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.2.2 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=ncftp +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 2 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -33,6 +43,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -43,7 +55,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ncftp-$VERSION -tar xvf $CWD/ncftp-$VERSION-src.tar.bz2 || exit 1 +tar xvf $CWD/ncftp-$VERSION-src.tar.?z* || exit 1 cd ncftp-$VERSION || exit 1 chown -R root:root . find . \ @@ -90,6 +102,14 @@ cp -a doc/* $PKG/usr/doc/ncftp-$VERSION # Useless redundancy: rm -r $PKG/usr/doc/ncftp-$VERSION/{html,man} +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r doc/CHANGELOG.txt ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat doc/CHANGELOG.txt | head -n 1000 > $DOCSDIR/CHANGELOG.txt + touch -r doc/CHANGELOG.txt $DOCSDIR/CHANGELOG.txt +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/n/net-snmp/net-snmp.SlackBuild b/source/n/net-snmp/net-snmp.SlackBuild index a102b0e56..c9ca3e71e 100755 --- a/source/n/net-snmp/net-snmp.SlackBuild +++ b/source/n/net-snmp/net-snmp.SlackBuild @@ -22,10 +22,18 @@ PKGNAM=net-snmp -VERSION=${VERSION:-5.4.2.1} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-5.5} BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -42,11 +50,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -129,6 +140,24 @@ fi # Remove perllocal files: ( cd $PKG ; find . -name perllocal.pod -exec rm "{}" \; ) +# This removes our DESTDIR from the packlist filenames, to keep perl's +# internal inventories consistent and correct. +find $PKG -name .packlist | while read plist ; do + sed -e "s%/share/man%/man%g" \ + -e "s%$PKG%%g" \ + -e "s%\.1$%\.1\.gz%g" \ + -e "s%\.2$%\.2\.gz%g" \ + -e "s%\.3$%\.3\.gz%g" \ + -e "s%\.3pm$%\.3pm\.gz%g" \ + -e "s%\.4$%\.4\.gz%g" \ + -e "s%\.5$%\.5\.gz%g" \ + -e "s%\.6$%\.6\.gz%g" \ + -e "s%\.7$%\.7\.gz%g" \ + -e "s%\.8$%\.8\.gz%g" \ + ${plist} > ${plist}.new + mv -f ${plist}.new ${plist} +done + # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ @@ -136,6 +165,14 @@ cp -a \ INSTALL NEWS PORTING README* TODO \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/n/netatalk/netatalk.SlackBuild b/source/n/netatalk/netatalk.SlackBuild index 1bffea9f0..467825108 100755 --- a/source/n/netatalk/netatalk.SlackBuild +++ b/source/n/netatalk/netatalk.SlackBuild @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.0.4 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo netatalk-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf netatalk-$VERSION -tar xvf $CWD/netatalk-$VERSION.tar.xz || exit 1 +tar xvf $CWD/netatalk-$VERSION.tar.?z* || exit 1 cd netatalk-$VERSION || exit 1 chown -R root:root . find . \ @@ -59,11 +71,11 @@ find . \ zcat $CWD/netatalk.etc2ps.diff.gz | patch -p1 || exit 1 # Allow building without xfs quota support -zcat $CWD/netatalk-2.0.4-without_xfs.diff.gz | patch -p1 || exit 1 +zcat $CWD/netatalk.without_xfs.diff.gz | patch -p1 || exit 1 # Disallow transmission of passwords via cleartext and with old version 1 of # the Diffie-Hellman protocol -zcat $CWD/netatalk-2.0.4-afpdconf.diff.gz | patch -p1 || exit 1 +zcat $CWD/netatalk.afpdconf.diff.gz | patch -p1 || exit 1 autoreconf -vif CFLAGS="$SLKCFLAGS" \ diff --git a/source/n/netatalk/netatalk-2.0.4-afpdconf.diff b/source/n/netatalk/netatalk.afpdconf.diff index b2cf5df6f..b2cf5df6f 100644 --- a/source/n/netatalk/netatalk-2.0.4-afpdconf.diff +++ b/source/n/netatalk/netatalk.afpdconf.diff diff --git a/source/n/netatalk/netatalk-2.0.4-without_xfs.diff b/source/n/netatalk/netatalk.without_xfs.diff index 75f97a038..75f97a038 100644 --- a/source/n/netatalk/netatalk-2.0.4-without_xfs.diff +++ b/source/n/netatalk/netatalk.without_xfs.diff diff --git a/source/n/network-scripts/network-scripts.SlackBuild b/source/n/network-scripts/network-scripts.SlackBuild index 319ca5e01..9cd6a4e7d 100755 --- a/source/n/network-scripts/network-scripts.SlackBuild +++ b/source/n/network-scripts/network-scripts.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,13 +23,13 @@ PKGNAM=network-scripts VERSION=${VERSION:-13.0} -ARCH=${ARCH:-noarch} -BUILD=${BUILD:-2} - +ARCH=noarch +BUILD=${BUILD:-3} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} + rm -rf $PKG mkdir -p $TMP $PKG/etc/rc.d ( cd $PKG/etc/rc.d diff --git a/source/n/network-scripts/scripts/rc.inet1 b/source/n/network-scripts/scripts/rc.inet1 index 0080f7dac..4e6c7aa00 100644 --- a/source/n/network-scripts/scripts/rc.inet1 +++ b/source/n/network-scripts/scripts/rc.inet1 @@ -106,12 +106,12 @@ if_up() { fi if [ "${USE_DHCP[$i]}" = "yes" ]; then # use DHCP to bring interface up [ ${DHCP_HOSTNAME[$i]} ] && DHCP_OPTIONS="-h ${DHCP_HOSTNAME[$i]}" - [ "${DHCP_KEEPRESOLV[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -R" - [ "${DHCP_KEEPNTP[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -N" + [ "${DHCP_KEEPRESOLV[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -C resolv.conf" + [ "${DHCP_KEEPNTP[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -C ntp.conf" [ "${DHCP_KEEPGW[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -G" [ "${DHCP_DEBUG[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -d" [ "${DHCP_NOIPV4LL[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -L" - [ ${DHCP_IPADDR[$i]} ] && DHCP_OPTIONS="$DHCP_OPTIONS -s ${DHCP_IPADDR[$i]}" + [ ${DHCP_IPADDR[$i]} ] && DHCP_OPTIONS="$DHCP_OPTIONS -r ${DHCP_IPADDR[$i]}" echo "Polling for DHCP server on interface ${1}:" # If you set a timeout, you get one, even if the kernel doesn't think that # your device is connected, in case /sys isn't right (which it usually isn't diff --git a/source/n/nfs-utils/nfs-utils-1.1.4.tar.bz2.sign b/source/n/nfs-utils/nfs-utils-1.1.4.tar.bz2.sign deleted file mode 100644 index 3457f1ef7..000000000 --- a/source/n/nfs-utils/nfs-utils-1.1.4.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.4.9 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQBI+KqOyGugalF9Dw4RAuC3AJ97L3+wXMajwG6cIy+8GJJUQYWi3ACgkyET -zLF2+bn5et1RX1dGiiijnhs= -=VrzL ------END PGP SIGNATURE----- diff --git a/source/n/nfs-utils/nfs-utils-1.2.2.tar.bz2.sign b/source/n/nfs-utils/nfs-utils-1.2.2.tar.bz2.sign new file mode 100644 index 000000000..a4b95a792 --- /dev/null +++ b/source/n/nfs-utils/nfs-utils-1.2.2.tar.bz2.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLfTsAyGugalF9Dw4RAgLSAJ0TnlJLHcU7dEWZ80LA775ZuQnrigCgjnWB +bxbY8o9jiBY9G422Fh6b8bA= +=dG1E +-----END PGP SIGNATURE----- diff --git a/source/n/nfs-utils/nfs-utils.SlackBuild b/source/n/nfs-utils/nfs-utils.SlackBuild index 1e3f5cbf9..8f3e3ef88 100755 --- a/source/n/nfs-utils/nfs-utils.SlackBuild +++ b/source/n/nfs-utils/nfs-utils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.4 -ARCH=${ARCH:-x86_64} +VERSION=1.2.2 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -33,6 +42,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -75,7 +86,7 @@ CFLAGS="$SLKCFLAGS" \ --enable-nfsv3 \ --enable-nfsv4=no \ --enable-gss=no \ - --enable-secure-statd \ + --enable-tirpc=no \ --program-prefix= \ --program-suffix= \ --build=$ARCH-slackware-linux diff --git a/source/n/nmap/nmap.SlackBuild b/source/n/nmap/nmap.SlackBuild index ddf13b9e6..747836ccf 100755 --- a/source/n/nmap/nmap.SlackBuild +++ b/source/n/nmap/nmap.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${PKGVERSION:-5.00} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-5.21} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -37,8 +45,13 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-nmap @@ -105,6 +118,14 @@ cp -a COPYING* HACKING INSTALL $PKG/usr/doc/nmap-$VERSION fi ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGELOG ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGELOG | head -n 1000 > $DOCSDIR/CHANGELOG + touch -r CHANGELOG $DOCSDIR/CHANGELOG +fi + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/n/nn/m-x86_64.h b/source/n/nn/m-x86_64.h new file mode 100644 index 000000000..931a6139f --- /dev/null +++ b/source/n/nn/m-x86_64.h @@ -0,0 +1,37 @@ +/************** Machine (and compiler) dependent definitions. ************** + * + * This file is for 80386 based UNIX/XENIX systems. + */ + + +/* MACHINE TYPE DEFINED TYPE VALUE RANGE */ + +typedef unsigned char int8; /* 0 .. 255 */ +typedef short int16; /* -10,000 .. 10,000 */ +typedef int int32; /* -100,000 .. 100,000 */ +typedef unsigned int uint32; /* 0 .. 2^31-1 */ + + + +#ifdef NETWORK_DATABASE + +#if 1 + +/* If you want network byte order, you most likely have TCP as well. */ +/* else... why want network byte order??? */ + +#define NETWORK_BYTE_ORDER /* THEY ARE NOT */ +#include <netinet/in.h> + +#else + +#undef NETWORK_BYTE_ORDER /* THEY ARE NOT */ +/* +YOU LOSE -- I DON'T KNOW HOW TO DO THIS ON 80386 BASED SYSTEMS! +*/ +#define htonl(l) ... /* host long to network long */ +#define ntohl(l) ... /* network long to host long */ + +#endif + +#endif /* NETWORK DATABASE */ diff --git a/source/n/nn/nn.SlackBuild b/source/n/nn/nn.SlackBuild index 45b694375..41757fcca 100755 --- a/source/n/nn/nn.SlackBuild +++ b/source/n/nn/nn.SlackBuild @@ -21,18 +21,30 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=6.7.3 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" + MFILE="m-i80386.h" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" + MFILE="m-x86_64.h" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + MFILE="m-i80386.h" fi CWD=$(pwd) @@ -53,14 +65,19 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -zcat $CWD/nn.diff.gz | sed -e "s#/usr/lib/nn#/usr/lib${LIBDIRSUFFIX}/nn#" \ - | patch -p1 --verbose || exit 1 +zcat $CWD/nn.diff.gz \ + | sed -e "s#m-sparc.h#${MFILE}#" \ + | sed -e "s#/usr/lib/nn#/usr/lib${LIBDIRSUFFIX}/nn#" \ + | patch -p0 --verbose || exit 1 +if [ $ARCH = "x86_64" ]; then + zcat $CWD/m-x86_64.h.gz > conf/m-x86_64.h +fi zcat $CWD/nn.badnntphost.diff.gz | patch -p1 --verbose || exit 1 # Taken from slamd64 (who adapted an old Ubuntu patch); # Besides adding DESTDIR support, it gets rid of the hardlinks that are created: zcat $CWD/nn.destdir.diff.gz | patch -p1 --verbose || exit 1 -cp config.h-dist config.h +cat config.h-dist | sed -e "s#m-sparc.h#${MFILE}#" > config.h make all echo "*** USE install option 's'" diff --git a/source/n/nn/nn.diff b/source/n/nn/nn.diff index 04ec3c4c2..e78cad97e 100644 --- a/source/n/nn/nn.diff +++ b/source/n/nn/nn.diff @@ -1,5 +1,19 @@ ---- ./config.h-dist.orig 2005-04-01 14:44:22.000000000 -0600 -+++ ./config.h-dist 2006-06-27 16:33:00.000000000 -0500 +--- conf/s-linux.h.orig 2009-11-11 15:43:05.780197095 -0500 ++++ conf/s-linux.h 2009-11-11 15:44:38.760195349 -0500 +@@ -131,9 +131,9 @@ + * (in config.h). + */ + +-#define HAVE_GETHOSTNAME /* BSD systems */ ++/* #define HAVE_GETHOSTNAME /* BSD systems */ + /* #define HAVE_UNAME */ /* System V */ +-/* #define HOSTNAME_FILE "/etc/uucpname" /* or another file */ ++#define HOSTNAME_FILE "/etc/HOSTNAME" /* or another file */ + /* #define HOSTNAME_WHOAMI /* in <whoami.h> */ + + /* +--- config.h-dist.orig 2009-11-11 15:44:13.560225381 -0500 ++++ config.h-dist 2009-11-11 15:49:36.937239629 -0500 @@ -45,7 +45,7 @@ #define DO_NOV_DIGEST @@ -73,6 +87,17 @@ #define DAEMON_MAN_SECTION "8" +@@ -301,8 +301,8 @@ + * SIGN_TYPE is the program to be used to create digital signatures. + */ + +-/* #define SIGN_TYPE "gpg" */ +-#define SIGN_TYPE "pgp" ++#define SIGN_TYPE "gpg" ++/* #define SIGN_TYPE "pgp" */ + + /* + * If no "Lines:" header field is present, NN can be made to @@ -425,7 +425,7 @@ * Default: NEWS_LIB_DIR/{rm,del}group */ @@ -83,3 +108,13 @@ +/* #define NEWS_LIB_DIRECTORY "/var/lib/news" */ /************************ CONFIGURATION COMPLETED ************************/ +--- hostname.c.orig 2009-11-11 16:00:16.485194441 -0500 ++++ hostname.c 2009-11-11 16:15:25.741225660 -0500 +@@ -17,6 +17,7 @@ + #include <unistd.h> + #include <string.h> + #include "config.h" ++#include "global.h" + + #undef DONE + diff --git a/source/n/ntp/ntp.SlackBuild b/source/n/ntp/ntp.SlackBuild index 93ff1ee82..b8d4d3638 100755 --- a/source/n/ntp/ntp.SlackBuild +++ b/source/n/ntp/ntp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=4.2.4p7 -ARCH=${ARCH:-x86_64} +PKGNAM=ntp +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -33,6 +42,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -45,6 +56,9 @@ cd $TMP rm -rf ntp-${VERSION}* tar xvf $CWD/ntp-${VERSION}*.tar.?z* || exit 1 cd ntp-${VERSION}* || exit 1 + +zcat $CWD/ntp.nano.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 2777 -o -perm 2755 \) \ @@ -61,12 +75,13 @@ CFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --bindir=/usr/sbin \ --sbindir=/usr/sbin \ + --mandir=/usr/man \ --program-prefix= \ --program-suffix= \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 +make -i install DESTDIR=$PKG || exit 1 # Since the Makefile's install pays no heed to the --bindir settings, # we'll move things to where they've always been ourselves: @@ -95,13 +110,37 @@ cp -a util/README $PKG/usr/doc/ntp-$VERSION/util mkdir $PKG/usr/doc/ntp-$VERSION/ntpdate cp -a ntpdate/README $PKG/usr/doc/ntp-$VERSION/ntpdate ( cd $PKG/usr/doc/ntp-$VERSION - find . -type d -name .deps -exec rm -rf {} \; 2> /dev/null + find . -name ".deps*" -exec rm -rf "{}" \; 2> /dev/null ) -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi -gzip -9 $PKG/usr/man/man?/*.? +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/n/ntp/ntp.nano.diff b/source/n/ntp/ntp.nano.diff new file mode 100644 index 000000000..0ff361ce9 --- /dev/null +++ b/source/n/ntp/ntp.nano.diff @@ -0,0 +1,17 @@ +--- ./include/ntp_syscall.h.orig 2009-12-09 01:36:37.000000000 -0600 ++++ ./include/ntp_syscall.h 2010-04-21 23:38:30.000000000 -0500 +@@ -14,6 +14,14 @@ + # include <sys/timex.h> + #endif + ++#if defined(ADJ_NANO) && !defined(MOD_NANO) ++#define MOD_NANO ADJ_NANO ++#endif ++ ++#if defined(ADJ_TAI) && !defined(MOD_TAI) ++#define MOD_TAI ADJ_TAI ++#endif ++ + #ifndef NTP_SYSCALLS_LIBC + #ifdef NTP_SYSCALLS_STD + # define ntp_adjtime(t) syscall(SYS_ntp_adjtime, (t)) diff --git a/source/n/ntp/rc.ntpd b/source/n/ntp/rc.ntpd index 2db421f6c..7cf3d50b0 100644 --- a/source/n/ntp/rc.ntpd +++ b/source/n/ntp/rc.ntpd @@ -12,11 +12,13 @@ ntpd_start() { # Stop ntpd: ntpd_stop() { echo -n "Stopping NTP daemon..." - kill $(cat /var/run/ntpd.pid) + if [ -r /var/run/ntpd.pid ]; then + kill -HUP $(cat /var/run/ntpd.pid) + rm -f /var/run/ntpd.pid + else + killall -HUP -q ntpd + fi echo - sleep 1 - rm -f /var/run/ntpd.pid - killall ntpd 2> /dev/null } # Restart ntpd: @@ -32,6 +34,7 @@ ntpd_status() { echo "ntpd is running." else echo "ntpd is stopped." + exit 1 fi } diff --git a/source/n/obex-data-server/doinst.sh b/source/n/obex-data-server/doinst.sh new file mode 100644 index 000000000..6c2a2f1c3 --- /dev/null +++ b/source/n/obex-data-server/doinst.sh @@ -0,0 +1,16 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/obex-data-server/imaging_capabilities.xml.new +config etc/obex-data-server/capability.xml.new + diff --git a/source/n/obex-data-server/obex-data-server.SlackBuild b/source/n/obex-data-server/obex-data-server.SlackBuild new file mode 100755 index 000000000..512b0e0d2 --- /dev/null +++ b/source/n/obex-data-server/obex-data-server.SlackBuild @@ -0,0 +1,114 @@ +#!/bin/bash + +# Copyright 2009 Robby Workman, Northport, Alabama, USA +# Copyright 2010 Patrick Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=obex-data-server +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Don't clobber config files +mv $PKG/etc/obex-data-server/imaging_capabilities.xml \ + $PKG/etc/obex-data-server/imaging_capabilities.xml.new +mv $PKG/etc/obex-data-server/capability.xml \ + $PKG/etc/obex-data-server/capability.xml.new + +gzip -9 $PKG/usr/man/man?/*.? + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING* NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/n/obex-data-server/slack-desc b/source/n/obex-data-server/slack-desc new file mode 100644 index 000000000..68bd08907 --- /dev/null +++ b/source/n/obex-data-server/slack-desc @@ -0,0 +1,20 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +obex-data-server: obex-data-server (Obex D-Bus Service Support) +obex-data-server: +obex-data-server: Obex-data-server is a D-Bus service providing high-level OBEX client +obex-data-server: and server side functionality, and currently supports OPP, FTP +obex-data-server: profiles and Bluetooth transport. +obex-data-server: +obex-data-server: +obex-data-server: +obex-data-server: +obex-data-server: +obex-data-server: +obex-data-server: diff --git a/source/ap/cupsddk/cupsddk.SlackBuild b/source/n/obexfs/obexfs.SlackBuild index 48157ffc9..05c9ceb32 100755 --- a/source/ap/cupsddk/cupsddk.SlackBuild +++ b/source/n/obexfs/obexfs.SlackBuild @@ -1,7 +1,9 @@ -#!/bin/sh +#!/bin/bash -# Copyright 2009 Robby Workman, Northport, AL, USA -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Slackware build script for obexfs + +# Copyright 2009 Robby Workman, Northport, Alabama, USA +# Copyright 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,18 +23,25 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# Slackware build script for cupsddk - - -VERSION=${VERSION:-1.2.3} -ARCH=${ARCH:-x86_64} +PKGNAM=obexfs +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} -NUMJOBS=${NUMJOBS:--j6} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-cupsddk +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -43,14 +52,17 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG -cd $TMP || exit 1 -rm -rf cupsddk-$VERSION -tar xvf $CWD/cupsddk-${VERSION}-source.tar.bz2 || exit 1 -cd cupsddk-$VERSION || exit 1 +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -66,22 +78,29 @@ CXXFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ - --with-docdir=/usr/doc/cupsddk-$VERSION \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 -make install BUILDROOT=$PKG || exit 1 +make install DESTDIR=$PKG || exit 1 -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - *.txt doc/*.html doc/images \ - $PKG/usr/doc/cupsddk-$VERSION + AUTHORS COPYING* INSTALL NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/cupsddk-$VERSION-$ARCH-$BUILD.txz - +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/obexfs/slack-desc b/source/n/obexfs/slack-desc new file mode 100644 index 000000000..73971edc1 --- /dev/null +++ b/source/n/obexfs/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +obexfs: obexfs (mount filesystem of ObexFTP capable devices) +obexfs: +obexfs: ObexFS uses FUSE to mount filesystems of ObexFTP capable devices +obexfs: either manually or in autofs style mode. It can handle all devices +obexfs: that the obexftp package can handle, connected via serial cable, +obexfs: IrDA, bluetooth, or USB. +obexfs: +obexfs: http://dev.zuckschwerdt.org/openobex/wiki/ObexDownloads +obexfs: +obexfs: +obexfs: diff --git a/source/n/obexftp/obexftp.SlackBuild b/source/n/obexftp/obexftp.SlackBuild index 821db8d21..e2992d559 100755 --- a/source/n/obexftp/obexftp.SlackBuild +++ b/source/n/obexftp/obexftp.SlackBuild @@ -1,5 +1,5 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,17 +21,24 @@ PKGNAM=obexftp -VERSION=${VERSION:-0.23} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-3} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,11 +49,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: @@ -57,6 +69,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Fixes the RSTRINGLEN for ruby-1.9 +zcat $CWD/ruby_rstringlen.diff.gz | patch -p1 --verbose || exit 1 + # Configure: CFLAGS="$SLKCFLAGS" \ ./configure \ @@ -110,27 +125,27 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS TODO contrib \ + AUTHORS COPYING* INSTALL NEWS README* THANKS TODO contrib \ $PKG/usr/doc/${PKGNAM}-$VERSION rm -f $PKG/usr/doc/${PKGNAM}-$VERSION/contrib/Makefile* +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Remove perllocal files: find $PKG -name perllocal.pod -exec rm "{}" \; # This removes our DESTDIR from the packlist filenames, to keep perl's # internal inventories consistent and correct. find $PKG -name .packlist | while read plist ; do - sed -e "s%/share/man%/man%g" \ - -e "s%$PKG%%g" \ - -e "s%\.1$%\.1\.gz%g" \ - -e "s%\.2$%\.2\.gz%g" \ - -e "s%\.3$%\.3\.gz%g" \ - -e "s%\.3pm$%\.3pm\.gz%g" \ - -e "s%\.4$%\.4\.gz%g" \ - -e "s%\.5$%\.5\.gz%g" \ - -e "s%\.6$%\.6\.gz%g" \ - -e "s%\.7$%\.7\.gz%g" \ - -e "s%\.8$%\.8\.gz%g" \ + sed -e "s%$PKG%%g" \ + -e "s%/share/man%/man%g" \ + -re "s%\.([1-9]n?|3pm)$%&.gz%g # extend man filenames for .gz" \ ${plist} > ${plist}.new mv -f ${plist}.new ${plist} done diff --git a/source/n/obexftp/ruby_rstringlen.diff b/source/n/obexftp/ruby_rstringlen.diff new file mode 100644 index 000000000..c406b44c2 --- /dev/null +++ b/source/n/obexftp/ruby_rstringlen.diff @@ -0,0 +1,15 @@ +diff -Naur obexftp-0.23.orig/swig/ruby/ruby_wrap.c obexftp-0.23/swig/ruby/ruby_wrap.c +--- obexftp-0.23.orig/swig/ruby/ruby_wrap.c 2009-02-17 12:30:40.000000000 -0600 ++++ obexftp-0.23/swig/ruby/ruby_wrap.c 2010-04-19 12:55:10.445810800 -0500 +@@ -2580,7 +2580,11 @@ + + /* VALUE str = StringValue(argv[0]); // perhaps better? */ + arg2 = STR2CSTR(argv[0]); ++#ifdef RSTRING_LEN ++ arg3 = (int) RSTRING_LEN(argv[0]); ++#else + arg3 = (int) RSTRING(argv[0])->len; ++#endif + + + diff --git a/source/n/openldap-client/openldap-client.SlackBuild b/source/n/openldap-client/openldap-client.SlackBuild index 0131f63c9..c23e17f48 100755 --- a/source/n/openldap-client/openldap-client.SlackBuild +++ b/source/n/openldap-client/openldap-client.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,10 +23,19 @@ # OpenLDAP (clients/libraries only!) -VERSION=2.3.43 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo openldap-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,8 +58,8 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf openldap-$VERSION -tar xjvf $CWD/openldap-$VERSION.tar.bz2 || exit 1 -cd openldap-$VERSION +tar xvf $CWD/openldap-$VERSION.tar.?z* || exit 1 +cd openldap-$VERSION || exit 1 chown -R root:root . find . -perm 777 -exec chmod 755 {} \; find . -perm 664 -exec chmod 644 {} \; @@ -57,6 +69,7 @@ CFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --localstatedir=/var/lib \ --sysconfdir=/etc \ + --mandir=/usr/man \ --with-cyrus-sasl \ --with-tls \ --with-readline \ @@ -89,9 +102,17 @@ EOF mkdir -p $PKG/usr/doc/openldap-$VERSION cp -a \ - ANNOUNCEMENT CHANGES COPYRIGHT LICENSE README \ + ANNOUNCEMENT COPYRIGHT LICENSE README \ $PKG/usr/doc/openldap-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + # Remove man pages for the servers (not currently supported or shipped... # do they even work properly without the evil PAM?) find $PKG/usr/man -name slap* -exec rm -f {} \; diff --git a/source/n/openobex/openobex.SlackBuild b/source/n/openobex/openobex.SlackBuild index 201735223..5559d9d29 100755 --- a/source/n/openobex/openobex.SlackBuild +++ b/source/n/openobex/openobex.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,18 +22,23 @@ PKGNAM=openobex -VERSION=${VERSION:-1.3} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -44,11 +49,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: @@ -106,9 +116,17 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING* ChangeLog INSTALL NEWS README* \ + AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install #zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/n/openssh/openssh.SlackBuild b/source/n/openssh/openssh.SlackBuild index 4a6611327..3d0d1a986 100755 --- a/source/n/openssh/openssh.SlackBuild +++ b/source/n/openssh/openssh.SlackBuild @@ -2,7 +2,7 @@ # Copyright 2000 BSDi, Inc. Concord, CA, USA # Copyright 2001, 2002, 2003, 2004 Slackware Linux, Inc. Concord, CA, USA -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -28,9 +28,20 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-openssh -VERSION=${VERSION:-5.2p1} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo openssh-*.tar.gz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,6 +53,8 @@ elif [ "$ARCH" = "arm" ]; then SLKCFLAGS="-O2 -march=armv4 -mtune=xscale" elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" +else + SLKCFLAGS="-O2" fi # Clean target location: @@ -51,7 +64,7 @@ mkdir -p $PKG # Prepare the framework and extract the package: cd $TMP rm -rf $PKG openssh-$VERSION -tar xjvf $CWD/openssh-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/openssh-$VERSION.tar.gz || tar xvf $CWD/openssh-$VERSION.tar.?z* || exit 1 cd openssh-$VERSION chown -R root:root . @@ -70,15 +83,13 @@ CFLAGS="$SLKCFLAGS" \ --with-privsep-user=sshd \ --build=$ARCH-slackware-linux -make -j4 || exit 1 +make $NUMJOBS || make || exit 1 # Install the package: make install DESTDIR=$PKG -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null # Compress and if needed symlink the man pages: if [ -d $PKG/usr/man ]; then @@ -107,6 +118,14 @@ cp -a \ $PKG/usr/doc/openssh-$VERSION chmod 644 $PKG/usr/doc/openssh-$VERSION/* +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Install also 'ssh-copy-id' and its manpage from contrib: ( cd contrib cp -a ssh-copy-id $PKG/usr/bin/ssh-copy-id diff --git a/source/n/openssl/openssl.SlackBuild b/source/n/openssl/openssl.SlackBuild index b6cb80741..82aa87f3c 100755 --- a/source/n/openssl/openssl.SlackBuild +++ b/source/n/openssl/openssl.SlackBuild @@ -2,7 +2,7 @@ # Copyright 2000 BSDi, Inc. Concord, CA, USA # Copyright 2001, 2002 Slackware Linux, Inc. Concord, CA, USA -# Copyright 2005, 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005, 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -27,9 +27,18 @@ CWD=$(pwd) TMP=${TMP:-/tmp} -VERSION=${VERSION:-0.9.8k} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo openssl-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi PKG1=$TMP/package-openssl PKG2=$TMP/package-ossllibs @@ -43,7 +52,7 @@ export LC_ALL=C cd $TMP rm -rf $PKG1 $PKG2 openssl-$VERSION -tar xvf $CWD/openssl-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/openssl-$VERSION.tar.?z* || exit 1 cd openssl-$VERSION # Use .so.0, not .so.0.9.8: @@ -56,9 +65,6 @@ elif [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" fi -# Advertise TLS extensions only on TLS handshakes, not SSL: -zcat $CWD/openssl.no-extssl.diff.gz | patch -p1 --verbose || exit 1 - chown -R root:root . mkdir -p $PKG1/usr/doc/openssl-$VERSION cp -a CHANGES CHANGES.SSLeay FAQ INSTALL INSTALL.MacOS INSTALL.VMS INSTALL.W32 \ @@ -66,6 +72,14 @@ cp -a CHANGES CHANGES.SSLeay FAQ INSTALL INSTALL.MacOS INSTALL.VMS INSTALL.W32 \ find $PKG1/usr/doc/openssl-$VERSION -type d -exec chmod 755 {} \; find $PKG1/usr/doc/openssl-$VERSION -type f -exec chmod 644 {} \; +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG1/usr/doc/*-$VERSION) + cat CHANGES | head -n 2000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + # These are the known patent issues with OpenSSL: # name # expires # MDC-2: 4,908,861 2007-03-13, included. :-) @@ -86,8 +100,24 @@ make $NUMJOBS || make || exit 1 make install INSTALL_PREFIX=$PKG1 || exit 1 +# Use proper libdir: ( cd $PKG1/usr; mv lib lib${LIBDIRSUFFIX} ) +# Make the .so.? library symlinks: +( cd $PKG1/usr/lib${LIBDIRSUFFIX} ; ldconfig -l lib*.so.* ) + +# Move libraries, as they might be needed by programs that bring a network +# mounted /usr online: + +mkdir $PKG1/lib${LIBDIRSUFFIX} +( cd $PKG1/usr/lib${LIBDIRSUFFIX} + for file in lib*.so.?.* ; do + mv $file ../../lib${LIBDIRSUFFIX} + ln -sf ../../lib${LIBDIRSUFFIX}/$file . + done + cp -a lib*.so.? ../../lib${LIBDIRSUFFIX} +) + # Add a cron script to warn root if a certificate is going to expire soon: mkdir -p $PKG1/etc/cron.daily zcat $CWD/certwatch.gz > $PKG1/etc/cron.daily/certwatch.new @@ -100,9 +130,6 @@ mv $PKG1/etc/ssl/openssl.cnf $PKG1/etc/ssl/openssl.cnf.new find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null ) -( cd $PKG1/usr/lib${LIBDIRSUFFIX} ; ldconfig -l * 2> /dev/null ) -( cd $PKG1/usr/lib${LIBDIRSUFFIX} ; ln -sf libcrypto.so.0 libcrypto.so ) -( cd $PKG1/usr/lib${LIBDIRSUFFIX} ; ln -sf libssl.so.0 libssl.so ) mv $PKG1/etc/ssl/man $PKG1/usr ( cd $PKG1/usr/man/man1 ; mv passwd.1 ssl_passwd.1 ) ( cd $PKG1/usr/man/man3 ; mv rand.3 ssl_rand.3 ) @@ -131,9 +158,9 @@ cat $CWD/slack-desc.openssl > install/slack-desc /sbin/makepkg -l y -c n $TMP/${NAME1}.txz # Make runtime package: -mkdir -p $PKG2/usr/lib${LIBDIRSUFFIX} -( cd usr/lib${LIBDIRSUFFIX} ; cp -a lib*.so.*.*.* $PKG2/usr/lib${LIBDIRSUFFIX} ) -( cd $PKG2/usr/lib${LIBDIRSUFFIX} ; ldconfig -l * ) +mkdir -p $PKG2/lib${LIBDIRSUFFIX} +( cd lib${LIBDIRSUFFIX} ; cp -a lib*.so.* $PKG2/lib${LIBDIRSUFFIX} ) +( cd $PKG2/lib${LIBDIRSUFFIX} ; ldconfig -l * ) mkdir -p $PKG2/etc ( cd $PKG2/etc ; cp -a $PKG1/etc/ssl . ) mkdir -p $PKG2/usr/doc/openssl-$VERSION @@ -141,6 +168,15 @@ mkdir -p $PKG2/usr/doc/openssl-$VERSION cp -a CHANGES CHANGES.SSLeay FAQ INSTALL INSTALL.MacOS INSTALL.VMS INSTALL.W32 \ LICENSE NEWS README README.ENGINE $PKG2/usr/doc/openssl-$VERSION ) + +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG2/usr/doc/*-$VERSION) + cat CHANGES | head -n 2000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + find $PKG2/usr/doc/openssl-$VERSION -type d -exec chmod 755 {} \; find $PKG2/usr/doc/openssl-$VERSION -type f -exec chmod 644 {} \; cd $PKG2 diff --git a/source/n/openssl/openssl.no-extssl.diff b/source/n/openssl/openssl.no-extssl.diff deleted file mode 100644 index de00d0c77..000000000 --- a/source/n/openssl/openssl.no-extssl.diff +++ /dev/null @@ -1,27 +0,0 @@ -diff -up openssl-0.9.8g/ssl/t1_lib.c.no-extssl openssl-0.9.8g/ssl/t1_lib.c ---- openssl-0.9.8g/ssl/t1_lib.c.no-extssl 2007-10-19 09:44:10.000000000 +0200 -+++ openssl-0.9.8g/ssl/t1_lib.c 2008-08-10 21:42:11.000000000 +0200 -@@ -132,6 +132,11 @@ unsigned char *ssl_add_clienthello_tlsex - int extdatalen=0; - unsigned char *ret = p; - -+ if (s->client_version != TLS1_VERSION && s->client_version != DTLS1_VERSION) -+ { -+ return ret; -+ } -+ - ret+=2; - - if (ret>=limit) return NULL; /* this really never occurs, but ... */ -@@ -202,6 +207,11 @@ unsigned char *ssl_add_serverhello_tlsex - int extdatalen=0; - unsigned char *ret = p; - -+ if (s->version != TLS1_VERSION && s->version != DTLS1_VERSION) -+ { -+ return ret; -+ } -+ - ret+=2; - if (ret>=limit) return NULL; /* this really never occurs, but ... */ - diff --git a/source/n/openvpn/openvpn.SlackBuild b/source/n/openvpn/openvpn.SlackBuild index 45c1a17d8..56e344c47 100755 --- a/source/n/openvpn/openvpn.SlackBuild +++ b/source/n/openvpn/openvpn.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006, Alan Hicks, Lizella, GA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=openvpn -VERSION=2.0.9 -ARCH=${ARCH:-x86_64} +PKGNAM=openvpn +VERSION=2.1.1 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -38,18 +47,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/pkg-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.gz || exit 1 +cd $PKGNAM-$VERSION || exit 1 # Fix ownership and permissions inside the source tarball. # It's appalling how many projects have 777 permissions or @@ -68,6 +80,8 @@ CXXFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc/openvpn \ --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/openvpn-${VERSION} \ --enable-lzo \ --build=$ARCH-slackware-linux @@ -87,7 +101,7 @@ chmod 644 $PKG/etc/openvpn/openvpn.conf.sample # Let folks know about the other configs, if they haven't found them. # They might even find the documentation there useful. ;-) cat << EOF > $PKG/etc/openvpn/README.TXT -Have a look in /usr/doc/$PRGNAM-$VERSION/sample-config-files +Have a look in /usr/doc/$PKGNAM-$VERSION/sample-config-files for some more examples of how to configure OpenVPN. You'll need to add something to your /etc/rc.d/rc.local to start OpenVPN, as well as to tell it where to find its config file. @@ -97,8 +111,8 @@ See "man openvpn" and the other docs for more information. EOF # Add a link, too: -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/sample-config-files -( cd $PKG/usr/doc/$PRGNAM-$VERSION/sample-config-files +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/sample-config-files +( cd $PKG/usr/doc/$PKGNAM-$VERSION/sample-config-files ln -sf /etc/openvpn/openvpn.conf.sample . ) @@ -109,14 +123,22 @@ if [ -d $PKG/usr/man ]; then ) fi -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a AUTHORS COPYING COPYRIGHT.GPL ChangeLog INSTALL INSTALL-win32.txt \ +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a AUTHORS COPYING COPYRIGHT.GPL INSTALL INSTALL-win32.txt \ NEWS PORTS README sample-config-files sample-keys sample-scripts easy-rsa \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/php/channels/pear.php.net.reg b/source/n/php/channels/pear.php.net.reg deleted file mode 100644 index f836b1a22..000000000 --- a/source/n/php/channels/pear.php.net.reg +++ /dev/null @@ -1 +0,0 @@ -a:5:{s:4:"name";s:12:"pear.php.net";s:14:"suggestedalias";s:4:"pear";s:7:"summary";s:40:"PHP Extension and Application Repository";s:7:"servers";a:1:{s:7:"primary";a:2:{s:6:"xmlrpc";a:1:{s:8:"function";a:10:{i:0;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:9:"logintest";}i:1;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:26:"package.listLatestReleases";}i:2;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:15:"package.listAll";}i:3;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:12:"package.info";}i:4;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:22:"package.getDownloadURL";}i:5;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.1";}s:8:"_content";s:22:"package.getDownloadURL";}i:6;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:25:"package.getDepDownloadURL";}i:7;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.1";}s:8:"_content";s:25:"package.getDepDownloadURL";}i:8;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:14:"package.search";}i:9;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:15:"channel.listAll";}}}s:4:"rest";a:1:{s:7:"baseurl";a:2:{i:0;a:2:{s:7:"attribs";a:1:{s:4:"type";s:7:"REST1.0";}s:8:"_content";s:25:"http://pear.php.net/rest/";}i:1;a:2:{s:7:"attribs";a:1:{s:4:"type";s:7:"REST1.1";}s:8:"_content";s:25:"http://pear.php.net/rest/";}}}}}s:13:"_lastmodified";s:31:"Sat, 04 Apr 2009 17:17:11 -0500";}
\ No newline at end of file diff --git a/source/n/php/channels/pecl.php.net.reg b/source/n/php/channels/pecl.php.net.reg deleted file mode 100644 index ea6eaa146..000000000 --- a/source/n/php/channels/pecl.php.net.reg +++ /dev/null @@ -1 +0,0 @@ -a:6:{s:4:"name";s:12:"pecl.php.net";s:14:"suggestedalias";s:4:"pecl";s:7:"summary";s:31:"PHP Extension Community Library";s:7:"servers";a:1:{s:7:"primary";a:2:{s:6:"xmlrpc";a:1:{s:8:"function";a:10:{i:0;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:9:"logintest";}i:1;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:26:"package.listLatestReleases";}i:2;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:15:"package.listAll";}i:3;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:12:"package.info";}i:4;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:22:"package.getDownloadURL";}i:5;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.1";}s:8:"_content";s:22:"package.getDownloadURL";}i:6;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:25:"package.getDepDownloadURL";}i:7;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.1";}s:8:"_content";s:25:"package.getDepDownloadURL";}i:8;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:14:"package.search";}i:9;a:2:{s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}s:8:"_content";s:15:"channel.listAll";}}}s:4:"rest";a:1:{s:7:"baseurl";a:2:{i:0;a:2:{s:7:"attribs";a:1:{s:4:"type";s:7:"REST1.0";}s:8:"_content";s:25:"http://pecl.php.net/rest/";}i:1;a:2:{s:7:"attribs";a:1:{s:4:"type";s:7:"REST1.1";}s:8:"_content";s:25:"http://pecl.php.net/rest/";}}}}}s:15:"validatepackage";a:2:{s:8:"_content";s:19:"PEAR_Validator_PECL";s:7:"attribs";a:1:{s:7:"version";s:3:"1.0";}}s:13:"_lastmodified";s:31:"Sat, 04 Apr 2009 17:17:11 -0500";}
\ No newline at end of file diff --git a/source/n/php/mod_php.conf.example b/source/n/php/mod_php.conf.example index 7a678b90c..670eb7135 100644 --- a/source/n/php/mod_php.conf.example +++ b/source/n/php/mod_php.conf.example @@ -7,8 +7,10 @@ LoadModule php5_module lib/httpd/modules/libphp5.so # Tell Apache to feed all *.php files through PHP. If you'd like to # parse PHP embedded in files with different extensions, comment out -# this line and see the example below. -AddType application/x-httpd-php .php +# these lines and see the example below. +<FilesMatch \.php$> + SetHandler application/x-httpd-php +</FilesMatch> # Tell Apache to feed all *.php, *.html, and *.htm files through # the PHP module. Add or subtract extensions here as desired. Please @@ -16,7 +18,12 @@ AddType application/x-httpd-php .php # and insecure, so be sure to know what you're doing. It's a convenient # shortcut, but probably isn't suitible for high-traffic sites if you # write any of your pages in straight HTML. -#AddType application/x-httpd-php .php .html .htm +#<FilesMatch "\.(php|html|htm)$"> +# SetHandler application/x-httpd-php +#</FilesMatch> # This will display PHP files in colored syntax form. Use with caution. -#AddType application/x-httpd-php-source .phps +#<FilesMatch "\.phps$"> +# SetHandler application/x-httpd-php-source +#</FilesMatch> + diff --git a/source/n/php/php.SlackBuild b/source/n/php/php.SlackBuild index 5f8e2d351..dc0b74bbd 100755 --- a/source/n/php/php.SlackBuild +++ b/source/n/php/php.SlackBuild @@ -3,7 +3,7 @@ # Build and package mod_php on Slackware. # by: David Cantrell <david@slackware.com> # Modified for PHP 4-5 by volkerdi@slackware.com -# Copyright 2007, 2008, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,11 +24,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=5.2.10 +VERSION=5.2.13 ALPINE=2.00 -ARCH=${ARCH:-x86_64} BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) @@ -37,7 +46,10 @@ PKG=$TMP/package-php/ rm -rf $PKG mkdir -p $TMP $PKG -if [ "$ARCH" = "i486" ]; then +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mcpu=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then @@ -46,6 +58,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi # we need to compile alpine to get c-client.a for IMAP support: @@ -77,9 +92,12 @@ fi cd $TMP rm -rf php-$VERSION -tar xvf $CWD/php-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/php-$VERSION.tar.?z* || exit 1 cd php-$VERSION +zcat $CWD/php.gmp5.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/php.gd_libpng-1.4.diff.gz | patch -p1 --verbose || exit 1 + # Add missing(?) PEAR modules back: if [ -d php-$VERSION/pear/packages ]; then ( cd php-$VERSION/pear/packages @@ -178,7 +196,7 @@ CFLAGS="$SLKCFLAGS" \ --with-mysqli=shared,/usr/bin/mysql_config \ --enable-pdo=shared \ --with-pdo-mysql=shared,/usr \ - --with-pdo-sqlite=shared \ + --with-pdo-sqlite=shared,/usr \ --with-pspell=shared,/usr \ --with-mm=/usr \ --enable-shmop=shared \ @@ -244,13 +262,13 @@ chmod 755 $PKG/usr/bin/pear rm -rf .channels .depdb .depdblock .filemap .lock .registry ) -# Fix a couple broken .reg files in php-5.2.10: -if ! grep -q Download $PKG/usr/lib${LIBDIRSUFFIX}/php/.channels/pear.php.net.reg ; then - cat $CWD/channels/pear.php.net.reg > $PKG/usr/lib${LIBDIRSUFFIX}/php/.channels/pear.php.net.reg -fi -if ! grep -q Download $PKG/usr/lib${LIBDIRSUFFIX}/php/.channels/pecl.php.net.reg ; then - cat $CWD/channels/pecl.php.net.reg > $PKG/usr/lib${LIBDIRSUFFIX}/php/.channels/pecl.php.net.reg -fi +## Fix a couple broken .reg files in php-5.2.10: +#if ! grep -q Download $PKG/usr/lib${LIBDIRSUFFIX}/php/.channels/pear.php.net.reg ; then +# cat $CWD/channels/pear.php.net.reg > $PKG/usr/lib${LIBDIRSUFFIX}/php/.channels/pear.php.net.reg +#fi +#if ! grep -q Download $PKG/usr/lib${LIBDIRSUFFIX}/php/.channels/pecl.php.net.reg ; then +# cat $CWD/channels/pecl.php.net.reg > $PKG/usr/lib${LIBDIRSUFFIX}/php/.channels/pecl.php.net.reg +#fi # Fix $PKG/usr/lib/php perms: ( cd $PKG/usr/lib${LIBDIRSUFFIX}/php diff --git a/source/n/php/php.gd_libpng-1.4.diff b/source/n/php/php.gd_libpng-1.4.diff new file mode 100644 index 000000000..a591b7331 --- /dev/null +++ b/source/n/php/php.gd_libpng-1.4.diff @@ -0,0 +1,12 @@ +diff -ru php-5.2.13.orig/ext/gd/libgd/gd_png.c php-5.2.13/ext/gd/libgd/gd_png.c +--- php-5.2.13.orig/ext/gd/libgd/gd_png.c 2009-03-14 12:48:42.000000000 -0500 ++++ php-5.2.13/ext/gd/libgd/gd_png.c 2010-03-21 02:17:03.000000000 -0500 +@@ -139,7 +139,7 @@ + return NULL; + } + +- if (!png_check_sig (sig, 8)) { /* bad signature */ ++ if (png_sig_cmp (sig, 0, 8)) { /* bad signature */ + return NULL; + } + diff --git a/source/n/php/php.gmp5.diff b/source/n/php/php.gmp5.diff new file mode 100644 index 000000000..f77dd33a1 --- /dev/null +++ b/source/n/php/php.gmp5.diff @@ -0,0 +1,11 @@ +--- ./ext/gmp/gmp.c.orig 2010-01-03 03:23:27.000000000 -0600 ++++ ./ext/gmp/gmp.c 2010-03-05 21:27:46.000000000 -0600 +@@ -1396,7 +1396,7 @@ + + GMPG(rand_initialized) = 1; + } +- mpz_urandomb(*gmpnum_result, GMPG(rand_state), GMP_ABS (limiter) * __GMP_BITS_PER_MP_LIMB); ++ mpz_urandomb(*gmpnum_result, GMPG(rand_state), GMP_ABS (limiter) * GMP_LIMB_BITS); + + ZEND_REGISTER_RESOURCE(return_value, gmpnum_result, le_gmp); + } diff --git a/source/n/pinentry/pinentry.SlackBuild b/source/n/pinentry/pinentry.SlackBuild index 3e0dd44de..d01b1295d 100755 --- a/source/n/pinentry/pinentry.SlackBuild +++ b/source/n/pinentry/pinentry.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006 Robby Workman (http://rlworkman.net) -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=pinentry -VERSION=0.7.6 -ARCH=${ARCH:-x86_64} +PKGNAM=pinentry +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -45,19 +54,23 @@ elif [ "$ARCH" = "arm" ]; then SLKCFLAGS="-O2 -march=armv4t" LIBDIRSUFFIX="" ARCHQUADLET="-gnueabi" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + ARCHQUADLET="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -102,14 +115,21 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ rm $PKG/usr/info/dir gzip -9 $PKG/usr/info/*.info -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* INSTALL NEWS README* THANKS TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION -cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/ppp/ppp.SlackBuild b/source/n/ppp/ppp.SlackBuild index 227a9beb0..f7732bd61 100755 --- a/source/n/ppp/ppp.SlackBuild +++ b/source/n/ppp/ppp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,14 +20,23 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.4.4 +VERSION=2.4.5 RADVER=0.3.2 PPPVER=1.98 -ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -96,7 +105,8 @@ rm -rf radiusclient-$RADVER tar xf $CWD/radiusclient-$RADVER.tar.bz2 || exit 1 cd radiusclient-$RADVER || exit 1 chown -R root:root . -cp /usr/share/libtool/config.{guess,sub} . +#cp /usr/share/libtool/config.{guess,sub} . # libtool-1.x +cp /usr/share/libtool/config/config.{guess,sub} . # libtool-2.x ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ diff --git a/source/n/proftpd/proftpd.SlackBuild b/source/n/proftpd/proftpd.SlackBuild index b004745ab..e7227fda3 100755 --- a/source/n/proftpd/proftpd.SlackBuild +++ b/source/n/proftpd/proftpd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,13 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.3.2 -DIRVER=1.3.2 -ARCH=${ARCH:-x86_64} +VERSION=1.3.3 +DIRVER=1.3.3 BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -48,7 +60,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf proftpd-$VERSION -tar xvf $CWD/proftpd-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/proftpd-$VERSION.tar.?z* || exit 1 cd proftpd-$DIRVER || exit 1 chown -R root:root . @@ -93,8 +105,13 @@ mkdir -p $PKG/usr/doc/proftpd-$VERSION cp -a COPYING CREDITS INSTALL NEWS README* \ contrib/README.mod_wrap contrib/README.ratio \ $PKG/usr/doc/proftpd-$VERSION -head -c 93 ChangeLog > $PKG/usr/doc/proftpd-$VERSION/ChangeLog -touch -r ChangeLog $PKG/usr/doc/proftpd-$VERSION/ChangeLog +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/proftpd-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi cp -a contrib/README $PKG/usr/doc/proftpd-$VERSION/README.contrib cp -a doc sample-configurations $PKG/usr/doc/proftpd-$VERSION # Bloat removal: diff --git a/source/n/pssh/pssh.SlackBuild b/source/n/pssh/pssh.SlackBuild index 8bb3dcbe9..25c19ae3c 100755 --- a/source/n/pssh/pssh.SlackBuild +++ b/source/n/pssh/pssh.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,20 @@ # required: package "python" version 2.2 or higher installed -VERSION=1.3.1 -ARCH=${ARCH:-x86_64} # Note that the package will be created as 'noarch' ! +VERSION=2.1.1 BUILD=1 +# Note that the package will be created as 'noarch' ! +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + PREFIX=/usr if [ "$ARCH" = "x86_64" ]; then diff --git a/source/n/pssh/slack-desc b/source/n/pssh/slack-desc index 42d25006f..8b69ec685 100644 --- a/source/n/pssh/slack-desc +++ b/source/n/pssh/slack-desc @@ -14,6 +14,6 @@ pssh: of large number of machines, using parallel ssh sessions. Included pssh: are parallel versions of ssh, scp, and rsync, as well as a parallel pssh: kill command. pssh: -pssh: Pssh has been written by Brent N. Chun, and requires the python -pssh: package installed. +pssh: Pssh has been written by Brent Chun <bnc at theether.org>, and is +pssh: currently maintained by Andrew McNabb <amcnabb at mcnabbs.org>. pssh: diff --git a/source/n/rdist/rdist-6.1.5-00.linux.diff b/source/n/rdist/rdist-6.1.5-00.linux.diff new file mode 100644 index 000000000..1f9fb8245 --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-00.linux.diff @@ -0,0 +1,23 @@ +diff: rdist-6.1.5/config/mf: No such file or directory +--- rdist-6.1.5/config/os-linux.h.linux Mon Nov 9 22:59:59 1998 ++++ rdist-6.1.5/config/os-linux.h Thu Nov 12 14:50:35 1998 +@@ -58,7 +58,7 @@ + /* + * Select the type of executable file format. + */ +-#define EXE_TYPE EXE_AOUT ++#define EXE_TYPE EXE_ELF + + /* + * Select the type of statfs() system call (if any). +--- rdist-6.1.5/mf/Makefile.var.linux Tue Nov 10 00:02:11 1998 ++++ rdist-6.1.5/mf/Makefile.var Thu Nov 12 14:50:35 1998 +@@ -67,7 +67,7 @@ + # + # Name of YACC. + # +-#YACC = bison -y ++YACC = bison -y + + OPT = -g + RM = rm diff --git a/source/n/rdist/rdist-6.1.5-01.links.diff b/source/n/rdist/rdist-6.1.5-01.links.diff new file mode 100644 index 000000000..187dce4d3 --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-01.links.diff @@ -0,0 +1,74 @@ +--- rdist-6.1.5/src/client.c.links Wed Feb 17 17:46:09 1999 ++++ rdist-6.1.5/src/client.c Wed Feb 17 17:51:15 1999 +@@ -309,6 +309,18 @@ + return(0); + } + ++void freelinkinfo(lp) ++ struct linkbuf *lp; ++{ ++ if (lp->pathname) ++ free(lp->pathname); ++ if (lp->src) ++ free(lp->src); ++ if (lp->target) ++ free(lp->target); ++ free(lp); ++} ++ + /* + * Save and retrieve hard link info + */ +@@ -317,6 +329,7 @@ + { + struct linkbuf *lp; + ++ /* xxx: linear search doesn't scale with many links */ + for (lp = ihead; lp != NULL; lp = lp->nextp) + if (lp->inum == statp->st_ino && lp->devnum == statp->st_dev) { + lp->count--; +@@ -329,12 +342,14 @@ + lp->inum = statp->st_ino; + lp->devnum = statp->st_dev; + lp->count = statp->st_nlink - 1; +- (void) strcpy(lp->pathname, target); +- (void) strcpy(lp->src, source); ++ lp->pathname = strdup(target); ++ lp->src = strdup(source); + if (Tdest) +- (void) strcpy(lp->target, Tdest); ++ lp->target = strdup(Tdest); + else +- *lp->target = CNULL; ++ lp->target = NULL; ++ if (!lp->pathname || !lp->src || !(Tdest && lp->target)) ++ fatalerr("Cannot malloc memory in linkinfo."); + + return((struct linkbuf *) NULL); + } +--- rdist-6.1.5/src/docmd.c.links Wed Feb 17 17:51:23 1999 ++++ rdist-6.1.5/src/docmd.c Wed Feb 17 17:52:44 1999 +@@ -586,7 +586,7 @@ + if (!nflag) { + register struct linkbuf *nextl, *l; + +- for (l = ihead; l != NULL; free((char *)l), l = nextl) { ++ for (l = ihead; l != NULL; freelinkinfo(l), l = nextl) { + nextl = l->nextp; + if (contimedout || IS_ON(opts, DO_IGNLNKS) || + l->count == 0) +--- rdist-6.1.5/include/defs.h.links Wed Feb 17 17:52:58 1999 ++++ rdist-6.1.5/include/defs.h Wed Feb 17 17:53:47 1999 +@@ -276,9 +276,9 @@ + ino_t inum; + dev_t devnum; + int count; +- char pathname[BUFSIZ]; +- char src[BUFSIZ]; +- char target[BUFSIZ]; ++ char *pathname; ++ char *src; ++ char *target; + struct linkbuf *nextp; + }; + diff --git a/source/n/rdist/rdist-6.1.5-03.hardlink.diff b/source/n/rdist/rdist-6.1.5-03.hardlink.diff new file mode 100644 index 000000000..5eeebc1cc --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-03.hardlink.diff @@ -0,0 +1,20 @@ +--- rdist-6.1.5/src/client.c.hardlink Thu Jun 3 13:56:31 1999 ++++ rdist-6.1.5/src/client.c Thu Jun 3 14:00:06 1999 +@@ -348,7 +348,7 @@ + lp->target = strdup(Tdest); + else + lp->target = NULL; +- if (!lp->pathname || !lp->src || !(Tdest && lp->target)) ++ if (!lp->pathname || !lp->src || (Tdest && !lp->target)) + fatalerr("Cannot malloc memory in linkinfo."); + + return((struct linkbuf *) NULL); +@@ -370,7 +370,7 @@ + "sendhardlink: rname='%s' pathname='%s' src='%s' target='%s'\n", + rname, lp->pathname, lp->src, lp->target); + +- if (*lp->target == CNULL) ++ if (lp->target == NULL || *lp->target == CNULL) + (void) sendcmd(C_RECVHARDLINK, "%o %s %s", + opts, lp->pathname, rname); + else { diff --git a/source/n/rdist/rdist-6.1.5-bison.diff b/source/n/rdist/rdist-6.1.5-04.bison.diff index a09130abd..a09130abd 100644 --- a/source/n/rdist/rdist-6.1.5-bison.diff +++ b/source/n/rdist/rdist-6.1.5-04.bison.diff diff --git a/source/n/rdist/rdist-6.1.5-varargs.diff b/source/n/rdist/rdist-6.1.5-05.varargs.diff index cf2786d2c..cf2786d2c 100644 --- a/source/n/rdist/rdist-6.1.5-varargs.diff +++ b/source/n/rdist/rdist-6.1.5-05.varargs.diff diff --git a/source/n/rdist/rdist-6.1.5-06.maxargs.diff b/source/n/rdist/rdist-6.1.5-06.maxargs.diff new file mode 100644 index 000000000..4fbe147bf --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-06.maxargs.diff @@ -0,0 +1,11 @@ +--- rdist-6.1.5/src/setargs.c.maxargs 1998-11-10 05:15:56.000000000 +0100 ++++ rdist-6.1.5/src/setargs.c 2003-09-04 14:39:03.000000000 +0200 +@@ -58,7 +58,7 @@ + * Set process argument functions + */ + +-#define MAXUSERENVIRON 40 ++#define MAXUSERENVIRON 1024 + char **Argv = NULL; + char *LastArgv = NULL; + char *UserEnviron[MAXUSERENVIRON+1]; diff --git a/source/n/rdist/rdist-6.1.5-07.lfs.diff b/source/n/rdist/rdist-6.1.5-07.lfs.diff new file mode 100644 index 000000000..e1fe2a182 --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-07.lfs.diff @@ -0,0 +1,137 @@ +--- rdist-6.1.5/src/client.c.lfs 2003-12-16 23:43:56.000000000 +0100 ++++ rdist-6.1.5/src/client.c 2003-12-16 23:46:56.000000000 +0100 +@@ -414,9 +414,9 @@ + /* + * Send file info + */ +- (void) sendcmd(C_RECVREG, "%o %04o %ld %ld %ld %s %s %s", ++ (void) sendcmd(C_RECVREG, "%o %04o %lld %ld %ld %s %s %s", + opts, stb->st_mode & 07777, +- (long) stb->st_size, ++ (off_t) stb->st_size, + stb->st_mtime, stb->st_atime, + user, group, rname); + if (response() < 0) { +@@ -424,8 +424,8 @@ + return(-1); + } + +- debugmsg(DM_MISC, "Send file '%s' %d bytes\n", +- rname, (long) stb->st_size); ++ debugmsg(DM_MISC, "Send file '%s' %lld bytes\n", ++ rname, (off_t) stb->st_size); + + /* + * Set remote time out alarm handler. +@@ -676,9 +676,9 @@ + /* + * Gather and send basic link info + */ +- (void) sendcmd(C_RECVSYMLINK, "%o %04o %ld %ld %ld %s %s %s", ++ (void) sendcmd(C_RECVSYMLINK, "%o %04o %lld %ld %ld %s %s %s", + opts, stb->st_mode & 07777, +- (long) stb->st_size, ++ (off_t) stb->st_size, + stb->st_mtime, stb->st_atime, + user, group, rname); + if (response() < 0) +@@ -858,7 +858,7 @@ + /* + * Parse size + */ +- size = strtol(cp, &cp, 10); ++ size = strtoll(cp, &cp, 10); + if (*cp++ != ' ') { + error("update: size not delimited"); + return(US_NOTHING); +@@ -910,8 +910,8 @@ + + debugmsg(DM_MISC, "update(%s,) local mode %04o remote mode %04o\n", + rname, lmode, rmode); +- debugmsg(DM_MISC, "update(%s,) size %d mtime %d owner '%s' grp '%s'\n", +- rname, (int) size, mtime, owner, group); ++ debugmsg(DM_MISC, "update(%s,) size %lld mtime %d owner '%s' grp '%s'\n", ++ rname, (off_t) size, mtime, owner, group); + + if (statp->st_mtime != mtime) { + if (statp->st_mtime < mtime && IS_ON(opts, DO_YOUNGER)) { +@@ -937,8 +937,8 @@ + } + + if (statp->st_size != size) { +- debugmsg(DM_MISC, "size does not match (%d != %d).\n", +- (int) statp->st_size, size); ++ debugmsg(DM_MISC, "size does not match (%lld != %lld).\n", ++ statp->st_size, size); + return(US_OUTDATE); + } + +--- rdist-6.1.5/src/server.c.lfs 1998-11-10 05:15:31.000000000 +0100 ++++ rdist-6.1.5/src/server.c 2003-12-16 23:50:19.000000000 +0100 +@@ -645,8 +645,8 @@ + case S_IFLNK: + case S_IFDIR: + case S_IFREG: +- (void) sendcmd(QC_YES, "%ld %ld %o %s %s", +- (long) stb.st_size, ++ (void) sendcmd(QC_YES, "%lld %ld %o %s %s", ++ (off_t) stb.st_size, + stb.st_mtime, + stb.st_mode & 07777, + getusername(stb.st_uid, target, options), +@@ -1388,7 +1388,7 @@ + /* + * Get file size + */ +- size = strtol(cp, &cp, 10); ++ size = strtoll(cp, &cp, 10); + if (*cp++ != ' ') { + error("recvit: size not delimited"); + return; +@@ -1441,7 +1441,7 @@ + } + + debugmsg(DM_MISC, +- "recvit: opts = %04o mode = %04o size = %d mtime = %d", ++ "recvit: opts = %04o mode = %04o size = %lld mtime = %d", + opts, mode, size, mtime); + debugmsg(DM_MISC, + "recvit: owner = '%s' group = '%s' file = '%s' catname = %d isdir = %d", +--- rdist-6.1.5/include/defs.h.lfs 2003-12-16 23:43:56.000000000 +0100 ++++ rdist-6.1.5/include/defs.h 2003-12-16 23:43:56.000000000 +0100 +@@ -22,6 +22,8 @@ + #include <stdlib.h> + #endif /* _POSIX_SOURCE */ + #include <stdio.h> ++#include <string.h> ++#include <mntent.h> + #include <ctype.h> + #include <errno.h> + #include <pwd.h> +@@ -317,15 +319,6 @@ + #endif /* USE_STATDB */ + + /* +- * System function declarations +- */ +-char *hasmntopt(); +-char *strchr(); +-char *strdup(); +-char *strrchr(); +-char *strtok(); +- +-/* + * Our own declarations. + */ + char *exptilde(); +--- rdist-6.1.5/Makefile.local.lfs 1998-11-10 04:36:31.000000000 +0100 ++++ rdist-6.1.5/Makefile.local 2003-12-16 23:43:56.000000000 +0100 +@@ -20,7 +20,7 @@ + # Add any local definitions you want pass to the compiler to DEFS_LOCAL + # below. This includes those items found in "config/config.h". + # +-#DEFS_LOCAL = -DDIRECT_RCMD ++DEFS_LOCAL = -O2 -g -pipe -Wall -D_POSIX_SOURCE -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 + + # + # Add any local libraries that your system might need to LIBS_LOCAL below. diff --git a/source/n/rdist/rdist-6.1.5-cleanup.diff b/source/n/rdist/rdist-6.1.5-08.cleanup.diff index 194291348..5b5bfa6c6 100644 --- a/source/n/rdist/rdist-6.1.5-cleanup.diff +++ b/source/n/rdist/rdist-6.1.5-08.cleanup.diff @@ -7,7 +7,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: gram.y,v 6.30 1998/11/10 04:10:42 mcooper Exp $"; @@ -170,7 +170,7 @@ ; @@ -112,7 +112,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: rdist.c,v 6.66 1998/11/10 04:13:49 mcooper Exp $"; @@ -80,7 +80,7 @@ char *name; @@ -232,7 +232,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: client.c,v 6.82 1998/11/10 04:08:47 mcooper Exp $"; @@ -84,7 +84,7 @@ int destdir; @@ -371,7 +371,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: child.c,v 6.29 1998/11/10 04:18:56 mcooper Exp $"; @@ -90,7 +90,7 @@ static void removechild(child) @@ -438,7 +438,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: docmd.c,v 6.87 1998/11/10 04:08:32 mcooper Exp $"; @@ -99,10 +99,10 @@ */ @@ -623,7 +623,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: distopt.c,v 6.12 1998/11/10 04:09:11 mcooper Exp $"; @@ -55,7 +55,7 @@ extern DISTOPTINFO *getdistopt(name) @@ -679,7 +679,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: expand.c,v 6.19 1998/11/10 04:09:31 mcooper Exp $"; @@ -81,9 +81,9 @@ sizeof(*sortbase), argcmp), sortbase = &eargv[eargc] @@ -857,7 +857,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: lookup.c,v 6.9 1998/11/10 04:12:56 mcooper Exp $"; @@ -68,11 +68,12 @@ /* @@ -896,7 +896,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: isexec.c,v 6.22 1998/11/10 04:11:42 mcooper Exp $"; --- rdist-6.1.5/src/signal.c.cleanup 1998-11-10 05:16:13.000000000 +0100 +++ rdist-6.1.5/src/signal.c 2003-12-17 11:38:16.000000000 +0100 @@ -907,7 +907,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: signal.c,v 6.2 1998/11/10 04:16:13 mcooper Exp $"; --- rdist-6.1.5/src/rshrcmd.c.cleanup 1998-11-10 05:15:07.000000000 +0100 +++ rdist-6.1.5/src/rshrcmd.c 2003-12-17 11:38:16.000000000 +0100 @@ -918,7 +918,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: rshrcmd.c,v 1.9 1998/11/10 04:15:07 mcooper Exp $"; @@ -34,6 +34,7 @@ * program in place of a direct rcmd() function call so as to @@ -945,7 +945,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: common.c,v 6.84 1998/11/10 04:09:01 mcooper Exp $"; @@ -87,14 +87,14 @@ /* @@ -1263,7 +1263,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: message.c,v 6.25 1998/11/10 04:13:30 mcooper Exp $"; @@ -97,7 +97,7 @@ */ @@ -1408,7 +1408,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: setargs.c,v 6.5 1998/11/10 04:15:56 mcooper Exp $"; @@ -66,12 +66,12 @@ /* @@ -1474,7 +1474,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: rdistd.c,v 6.23 1998/11/10 04:14:06 mcooper Exp $"; @@ -53,21 +53,12 @@ @@ -1527,7 +1527,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: server.c,v 6.86 1998/11/10 04:15:31 mcooper Exp $"; @@ -197,7 +197,7 @@ static UID_T last_uid = (UID_T)-2; @@ -1748,7 +1748,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: filesys.c,v 6.25 1998/11/10 04:10:17 mcooper Exp $"; @@ -72,7 +72,7 @@ static char last_pathname[MAXPATHLEN]; @@ -1833,7 +1833,7 @@ -#ifndef lint +#if 0 static char RCSid[] = - "$Id: rdist-6.1.5-cleanup.diff,v 1.1 2008/10/27 20:26:28 eha Exp eha $"; + "$Id: filesys-os.c,v 6.18 1998/11/10 04:09:58 mcooper Exp $"; @@ -314,7 +314,7 @@ diff --git a/source/n/rdist/rdist-6.1.5-09.svr4.diff b/source/n/rdist/rdist-6.1.5-09.svr4.diff new file mode 100644 index 000000000..15fc23fbd --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-09.svr4.diff @@ -0,0 +1,10 @@ +--- rdist-6.1.5/build/os-type.svr4 2003-12-17 12:44:18.000000000 +0100 ++++ rdist-6.1.5/build/os-type 2003-12-17 12:44:29.000000000 +0100 +@@ -83,7 +83,6 @@ + if [ -z "${OS}" -a ! -z "${uname}" ]; then + case "`$uname -a | tr '[A-Z]' '[a-z]'`" in + osf1*) OS=break;; +- *"4.0"*) OS=svr4;; # There has to be a better way + *" dcosx "*) OS=dcosx;; + *"cx/ux"*) OS=cxux;; + *"hp-ux"*) # HP-UX 9.x diff --git a/source/n/rdist/rdist-6.1.5-10.ssh.diff b/source/n/rdist/rdist-6.1.5-10.ssh.diff new file mode 100644 index 000000000..f70beb9bf --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-10.ssh.diff @@ -0,0 +1,9 @@ +--- rdist-6.1.5/src/rshrcmd.c.dist Tue Dec 12 08:20:56 1995 ++++ rdist-6.1.5/src/rshrcmd.c Wed Dec 11 07:14:13 1996 +@@ -64,5 +64,5 @@ + sp[0]. */ + (void) close(sp[0]); +- if (dup2(sp[1], 0) < 0 || dup2(0,1) < 0 || dup2(0, 2) < 0) { ++ if (dup2(sp[1], 0) < 0 || dup2(0,1) < 0) { + error("dup2 failed: %s.", SYSERR); + _exit(255); diff --git a/source/n/rdist/rdist-6.1.5-11.mkstemp.diff b/source/n/rdist/rdist-6.1.5-11.mkstemp.diff new file mode 100644 index 000000000..9d9297a8e --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-11.mkstemp.diff @@ -0,0 +1,23 @@ +--- rdist-6.1.5/src/server.c.mkstemp 2004-05-25 14:29:37.279312752 +0200 ++++ rdist-6.1.5/src/server.c 2004-05-25 14:31:27.050744340 +0200 +@@ -1479,11 +1479,18 @@ + *file = '/'; + } + fd = mkstemp(new); +- if (fd < 0) { ++ /* ++ * Don't consider it a fatal error if mkstemp() fails ++ * because parent directory didn't exist. (Missing ++ * parents are created later (in recvfile()) ++ */ ++ if ((fd < 0) && (errno != ENOENT)) { + error("Cannot set file name."); + return; ++ } else if (fd >= 0) { ++ close(fd); ++ unlink(new); /* Or symlink() will fail */ + } +- close(fd); + } + + /* diff --git a/source/n/rdist/rdist-6.1.5-12.stat64.diff b/source/n/rdist/rdist-6.1.5-12.stat64.diff new file mode 100644 index 000000000..3b02d3e8a --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-12.stat64.diff @@ -0,0 +1,80 @@ +--- rdist-6.1.5/src/filesys.c.stat64 2005-05-04 14:11:03.000000000 +0200 ++++ rdist-6.1.5/src/filesys.c 2005-05-04 14:11:10.000000000 +0200 +@@ -430,8 +430,8 @@ + */ + int getfilesysinfo(file, freespace, freefiles) + char *file; +- long *freespace; +- long *freefiles; ++ fsblkcnt_t *freespace; ++ fsfilcnt_t *freefiles; + { + #if defined(STATFS_TYPE) + static statfs_t statfsbuf; +--- rdist-6.1.5/src/server.c.stat64 2005-05-04 14:11:23.000000000 +0200 ++++ rdist-6.1.5/src/server.c 2005-05-04 14:20:34.000000000 +0200 +@@ -62,8 +62,8 @@ + int catname = 0; /* cat name to target name */ + char *sptarget[32]; /* stack of saved ptarget's for directories */ + char *fromhost = NULL; /* Client hostname */ +-static long min_freespace = 0; /* Minimium free space on a filesystem */ +-static long min_freefiles = 0; /* Minimium free # files on a filesystem */ ++static fsblkcnt_t min_freespace = 0; /* Minimium free space on a filesystem */ ++static fsfilcnt_t min_freefiles = 0; /* Minimium free # files on a filesystem */ + int oumask; /* Old umask */ + + /* +@@ -1326,7 +1326,7 @@ + fatalerr("Expected digit, got '%s'.", cp); + return; + } +- min_freespace = (unsigned long) atoi(cp); ++ min_freespace = (fsblkcnt_t) atoll(cp); + break; + + case SC_FREEFILES: /* Minimium free files */ +@@ -1334,7 +1334,7 @@ + fatalerr("Expected digit, got '%s'.", cp); + return; + } +- min_freefiles = (unsigned long) atoi(cp); ++ min_freefiles = (fsfilcnt_t) atoll(cp); + break; + + case SC_LOGGING: /* Logging options */ +@@ -1364,7 +1364,8 @@ + time_t mtime, atime; + char *owner, *group, *file; + char new[MAXPATHLEN]; +- long freespace = -1, freefiles = -1; ++ fsfilcnt_t freefiles = -1; ++ fsblkcnt_t freespace = -1; + char *cp = cmd; + + /* +@@ -1499,7 +1500,7 @@ + */ + if (min_freespace || min_freefiles) { + /* Convert file size to kilobytes */ +- long fsize = (long) (size / 1024); ++ fsblkcnt_t fsize = (fsblkcnt_t) (size / 1024); + + if (getfilesysinfo(target, &freespace, &freefiles) != 0) + return; +@@ -1511,14 +1512,14 @@ + if (min_freespace && (freespace >= 0) && + (freespace - fsize < min_freespace)) { + error( +- "%s: Not enough free space on filesystem: min %d free %d", ++ "%s: Not enough free space on filesystem: min %lld free %lld", + target, min_freespace, freespace); + return; + } + if (min_freefiles && (freefiles >= 0) && + (freefiles - 1 < min_freefiles)) { + error( +- "%s: Not enough free files on filesystem: min %d free %d", ++ "%s: Not enough free files on filesystem: min %lld free %lld", + target, min_freefiles, freefiles); + return; + } diff --git a/source/n/rdist/rdist-6.1.5-14.fix-msgsndnotify-loop.diff b/source/n/rdist/rdist-6.1.5-14.fix-msgsndnotify-loop.diff new file mode 100644 index 000000000..d34aa78d8 --- /dev/null +++ b/source/n/rdist/rdist-6.1.5-14.fix-msgsndnotify-loop.diff @@ -0,0 +1,32 @@ +--- rdist-6.1.5/src/message.c.thestokes 2006-04-19 17:30:39.000000000 -0400 ++++ rdist-6.1.5/src/message.c 2006-04-19 17:36:37.000000000 -0400 +@@ -793,15 +793,20 @@ + char *msg; + { + static char buf[MSGBUFSIZ]; +- +- ++nerrs; +- +- if (isserver) +- (void) sprintf(buf, "REMOTE ERROR: %s", msg); +- else +- (void) sprintf(buf, "LOCAL ERROR: %s", msg); +- +- _message(MT_FERROR, buf); ++ /* Don't reenter this function. There is a nasty infinite recursion ++ case that pops up when msgsndnotify tries to exit. */ ++ static int inside=0; ++ ++ if(inside==0){ ++ ++nerrs; ++ inside=1; ++ ++ if (isserver) ++ (void) sprintf(buf, "REMOTE ERROR: %s", msg); ++ else ++ (void) sprintf(buf, "LOCAL ERROR: %s", msg); ++ _message(MT_FERROR, buf); ++ } + + exit(nerrs); + } diff --git a/source/n/rdist/rdist-6.1.5.diff b/source/n/rdist/rdist-6.1.5.diff deleted file mode 100644 index 0445ca9b0..000000000 --- a/source/n/rdist/rdist-6.1.5.diff +++ /dev/null @@ -1,107 +0,0 @@ -diff -ur rdist-6.1.5.orig/Makefile rdist-6.1.5/Makefile ---- rdist-6.1.5.orig/Makefile Mon Nov 9 19:36:06 1998 -+++ rdist-6.1.5/Makefile Tue Apr 3 10:56:28 2001 -@@ -17,9 +17,10 @@ - SHELL=/bin/sh - - all install install.man: FRC -- @for t in $(TARGETS); do \ -+ @for t in $(TARGETS); do ( \ - echo Making \"$@\" in \"$$t\"; \ - (cd $$t; ${MAKE} $@); \ -+ ) || exit 1; \ - done - - clean: -diff -ur rdist-6.1.5.orig/Makefile.local rdist-6.1.5/Makefile.local ---- rdist-6.1.5.orig/Makefile.local Mon Nov 9 19:36:31 1998 -+++ rdist-6.1.5/Makefile.local Tue Apr 3 10:56:28 2001 -@@ -15,6 +15,20 @@ - # or add your own line. - # - #BIN_DIR = /usr/bin -+BIN_DIR = /usr/bin -+MAN_1_DIR = /usr/man/man1 -+MAN_8_DIR = /usr/man/man8 -+RDIST_MODE = 755 -+RDISTD_MODE = 755 -+MAN_MODE = 644 -+MAN_OWNER = root -+MAN_GROUP = root -+BIN_GROUP = root -+ -+INSTALL = install -+YACC = bison -y -+ -+OPT = -Wall -O2 -pipe - - # - # Add any local definitions you want pass to the compiler to DEFS_LOCAL -Only in rdist-6.1.5: Makefile.local~ -Only in rdist-6.1.5: Makefile~ -diff -ur rdist-6.1.5.orig/config/os-linux.h rdist-6.1.5/config/os-linux.h ---- rdist-6.1.5.orig/config/os-linux.h Mon Nov 9 19:59:59 1998 -+++ rdist-6.1.5/config/os-linux.h Tue Apr 3 10:56:28 2001 -@@ -93,8 +93,8 @@ - /* - * Our types, usually these are uid_t and gid_t. - */ --typedef uid_t UID_T; /* Must be signed */ --typedef gid_t GID_T; /* Must be signed */ -+typedef int UID_T; /* Must be signed */ -+typedef int GID_T; /* Must be signed */ - - /* - * Generic pointer, used by memcpy, malloc, etc. Usually char or void. -Only in rdist-6.1.5/config: os-linux.h~ -diff -ur rdist-6.1.5.orig/doc/Makefile.real rdist-6.1.5/doc/Makefile.real ---- rdist-6.1.5.orig/doc/Makefile.real Mon Nov 9 21:40:06 1998 -+++ rdist-6.1.5/doc/Makefile.real Tue Apr 3 10:56:28 2001 -@@ -16,7 +16,7 @@ - - doc: - --install: -+install: install.man - - install.man: rdist.man rdistd.man - ${INSTALL} ${INSTALL_ARGS} rdist.man ${CLIENT_DEST} -Only in rdist-6.1.5/doc: Makefile.real~ -diff -ur rdist-6.1.5.orig/doc/rdist.man rdist-6.1.5/doc/rdist.man ---- rdist-6.1.5.orig/doc/rdist.man Mon Nov 9 21:38:53 1998 -+++ rdist-6.1.5/doc/rdist.man Tue Apr 3 10:56:28 2001 -@@ -171,7 +171,7 @@ - .I rdist - was compiled with the location of the old rdist - (usually either --.I /usr/ucb/oldrdist -+.I /usr/bin/oldrdist - or - .I /usr/old/rdist) - and that program is available at run time. -@@ -511,7 +511,7 @@ - may be a colon seperated list of possible pathnames. - In this case, the first component of the path to exist is used. - i.e. --.B "/usr/ucb/rsh:/usr/bin/remsh", -+.B "/usr/bin/rsh:/usr/bin/remsh", - .B /usr/bsd/rsh. - .TP - .B "\-t \fItimeout\fR" -Only in rdist-6.1.5/doc: rdist.man~ -diff -ur rdist-6.1.5.orig/src/Makefile.real rdist-6.1.5/src/Makefile.real ---- rdist-6.1.5.orig/src/Makefile.real Mon Nov 9 20:03:46 1998 -+++ rdist-6.1.5/src/Makefile.real Tue Apr 3 10:56:28 2001 -@@ -52,9 +52,9 @@ - $(COMMONOBJS) $(MISSINGOBJS) - - install: -- $(INSTALL) ${IN_ARGS} -o $(BIN_OWNER) -m ${RDIST_MODE} \ -+ $(INSTALL) ${IN_ARGS} -s -o $(BIN_OWNER) -m ${RDIST_MODE} \ - $(CLIENT_BIN) $(BIN_DIR)/$(CLIENT) -- $(INSTALL) ${IN_ARGS} -o ${BIN_OWNER} -m ${RDISTD_MODE} \ -+ $(INSTALL) ${IN_ARGS} -s -o ${BIN_OWNER} -m ${RDISTD_MODE} \ - $(SERVER_BIN) $(BIN_DIR)/$(SERVER) - - install.man: -Only in rdist-6.1.5/src: Makefile.real~ diff --git a/source/n/rdist/rdist-eu-license.txt b/source/n/rdist/rdist-eu-license.txt new file mode 100644 index 000000000..7ae1591b4 --- /dev/null +++ b/source/n/rdist/rdist-eu-license.txt @@ -0,0 +1,118 @@ + MagniComp - End User License Agreement + + www.MagniComp.com + + RDist Version 6.1 + + Version of This Document: 19990724 + +GRANT. + +MagniComp grants you a non-exclusive license to use RDist version 6.1 and +all subsequent versions called 6.1.X software (the "Software") free of +charge. + +This license does not entitle you to hard-copy documentation, support or +telephone assistance. MagniComp reserves the right at any time to alter +prices, features, specifications, capabilities, functions, licensing terms, +general availability of the Software. + +SCOPE OF GRANT. + +You may: + + * use the Software in any way you wish on any computer regardless of + ownership of said computer; + * redistribute the Software in any form, including source and binary, to + any party with or without charging a fee; + * copy the Software for any purpose. + +You may not: + + * remove or alter this notice; + * remove or alter any proprietary notices or labels on the Software. + +REQUIREMENTS. + + * All advertising materials mentioning features or use of this software + must display the following acknowledgement: + + This product includes software developed by MagniComp + (www.MagniComp.com) and its contributors. + + * Redistributions in binary form must reproduce this copyright notice, + this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + * Neither name of MagniComp nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + +TITLE. + +Title, ownership rights, and intellectual property rights in the Software +shall remain in MagniComp and/or its suppliers. The Software is protected by +copyright and other intellectual property laws and by international +treaties. Title and related rights in the content accessed through the +Software is the property of the applicable content owner and may be +protected by applicable law. This license gives you no rights to such +content. + +TERMINATION. + +The license will terminate automatically if you fail to comply with the +limitations described herein. Upon termination of this license, you agree to +destroy all copies of the Software. + +DISCLAIMER OF WARRANTY. + +The Software is provided on an "AS IS" basis, without warranty of any kind, +including without limitation the warranties of merchantability, fitness for +a particular purpose and non-infringement. The entire risk as to the quality +and performance of the Software is borne by you. Should the Software prove +defective, you and not MagniComp or its suppliers assume the entire cost of +any service and repair. In addition, the security mechanisms implemented by +MagniComp software have inherent limitations, and you must determine that +the Software sufficiently meets your requirements. This disclaimer of +warranty constitutes an essential part of the agreement. SOME JURISDICTIONS +DO NOT ALLOW EXCLUSIONS OF AN IMPLIED WARRANTY, SO THIS DISCLAIMER MAY NOT +APPLY TO YOU AND YOU MAY HAVE OTHER LEGAL RIGHTS THAT VARY BY JURISDICTION. + +LIMITATION OF LIABILITY. + +UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, TORT, CONTRACT, OR +OTHERWISE, SHALL MAGNICOMP OR ITS SUPPLIERS OR RESELLERS BE LIABLE TO YOU OR +ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF +GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL +OTHER COMMERCIAL DAMAGES OR LOSSES. IN NO EVENT WILL MAGNICOMP BE LIABLE FOR +ANY DAMAGES, EVEN IF MAGNICOMP SHALL HAVE BEEN INFORMED OF THE POSSIBILITY +OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. THIS LIMITATION OF +LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY TO THE +EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. FURTHERMORE, SOME +JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR +CONSEQUENTIAL DAMAGES, SO THIS LIMITATION AND EXCLUSION MAY NOT APPLY TO +YOU. + +HIGH RISK ACTIVITIES. + +The Software is not fault-tolerant and is not designed, manufactured or +intended for use or resale as on-line control equipment in hazardous +environments requiring fail-safe performance, such as in the operation of +nuclear facilities, aircraft navigation or communication systems, air +traffic control, direct life support machines, or weapons systems, in which +the failure of the Software could lead directly to death, personal injury, +or severe physical or environmental damage ("High Risk Activities"). +MagniComp and its suppliers specifically disclaim any express or implied +warranty of fitness for High Risk Activities. + +MISCELLANEOUS. + +This Agreement represents the complete agreement concerning this license and +may amended only by a writing executed by both parties. If any provision of +this Agreement is held to be unenforceable, such provision shall be reformed +only to the extent necessary to make it enforceable. This Agreement shall be +governed by California law (except for conflict of law provisions). The +application the United Nations Convention of Contracts for the International +Sale of Goods is expressly excluded. + + END diff --git a/source/n/rdist/rdist.SlackBuild b/source/n/rdist/rdist.SlackBuild index e2dd87cdd..66f48c9b0 100755 --- a/source/n/rdist/rdist.SlackBuild +++ b/source/n/rdist/rdist.SlackBuild @@ -1,6 +1,5 @@ #!/bin/sh - -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,59 +19,108 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=6.1.5 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} + +CWD=$(pwd) + +PKGNAM=rdist +VERSION=${VERSION:-6.1.5} +BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-rdist +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$TMP" = "" ]; then + TMP=/tmp +fi +PKG=$TMP/package-${PKGNAM} rm -rf $PKG -mkdir -p $TMP $PKG +mkdir -p $PKG -# Explode the package framework: -cd $PKG -explodepkg $CWD/_rdist.tar.gz +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mcpu=i686" +elif [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2" +fi cd $TMP -rm -rf rdist-$VERSION -tar xvf $CWD/rdist-$VERSION.tar.gz || exit 1 -cd rdist-$VERSION || exit 1 + +rm -rf $PKGNAM-$VERSION +tar xf $CWD/$PKGNAM-$VERSION.tar.gz || exit 1 + +cd ${PKGNAM}-$VERSION + +# Make sure ownerships and permissions are sane: chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -zcat $CWD/rdist-$VERSION.diff.gz | patch -p1 --backup -# Modern tools require patching: -zcat $CWD/rdist-6.1.5-bison.diff.gz | patch -p1 --verbose || exit 1 -zcat $CWD/rdist-6.1.5-cleanup.diff.gz | patch -p1 --verbose || exit 1 -zcat $CWD/rdist-6.1.5-varargs.diff.gz | patch -p1 --verbose || exit 1 +find . -perm 666 -exec chmod 644 {} \; +find . -perm 664 -exec chmod 644 {} \; +find . -perm 600 -exec chmod 644 {} \; +find . -perm 444 -exec chmod 644 {} \; +find . -perm 400 -exec chmod 644 {} \; +find . -perm 440 -exec chmod 644 {} \; +find . -perm 777 -exec chmod 755 {} \; +find . -perm 775 -exec chmod 755 {} \; +find . -perm 511 -exec chmod 755 {} \; +find . -perm 711 -exec chmod 755 {} \; +find . -perm 555 -exec chmod 755 {} \; +# Patch: +for diff in $CWD/*.diff.gz ; do + zcat $diff | patch -p1 --verbose || exit 1 +done + +# Build: make $NUMJOBS || make || exit 1 -cd src -strip rdist rdistd -cat rdist > $PKG/usr/bin/rdist -cat rdistd > $PKG/usr/bin/rdistd +# Install: +mkdir -p $PKG/usr/bin +cp -a src/{rdist,rdistd} $PKG/usr/bin + +mkdir -p $PKG/usr/man/man1 +cat doc/rdist.man | gzip -9c > $PKG/usr/man/man1/rdist.1.gz +cat doc/rdistd.man | gzip -9c > $PKG/usr/man/man1/rdistd.1.gz + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + $CWD/rdist-eu-license.txt Copyright README \ + $PKG/usr/doc/$PKGNAM-$VERSION -cd ../doc -cat rdist.man | gzip -9c > $PKG/usr/man/man1/rdist.1.gz -cat rdistd.man | gzip -9c > $PKG/usr/man/man1/rdistd.1.gz +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) -cd .. -mkdir -p $PKG/usr/doc/rdist-$VERSION -cp -a README $PKG/usr/doc/rdist-$VERSION -chmod 644 $PKG/usr/doc/rdist-$VERSION/* +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -# Build the package: -cd $PKG -/sbin/makepkg -l y -c n $TMP/rdist-$VERSION-$ARCH-$BUILD.txz +cd $TMP/package-${PKGNAM} +makepkg -l y -c n ../${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/rsync/rsync.SlackBuild b/source/n/rsync/rsync.SlackBuild index e4def4e3c..dadf3cd56 100755 --- a/source/n/rsync/rsync.SlackBuild +++ b/source/n/rsync/rsync.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,27 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.0.6 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo rsync-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) diff --git a/source/ap/mpg321/mpg321.SlackBuild b/source/n/rt2860-firmware/rt2860-firmware.SlackBuild index 340c32703..280b276ff 100755 --- a/source/ap/mpg321/mpg321.SlackBuild +++ b/source/n/rt2860-firmware/rt2860-firmware.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,57 +21,40 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.2.10 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +CWD=$(pwd) -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" -fi +PKGNAM=rt2860-firmware +VERSION=${VERSION:-26} +ARCH=${ARCH:-fw} +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-mpg321 - +PKG=$TMP/package-${PKGNAM} rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -tar xvf $CWD/mpg321-$VERSION.tar.gz || exit 1 -cd mpg321-$VERSION || exit 1 - -CFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --build=$ARCH-slackware-linux - -make $NUMJOBS || make || exit 1 - -strip mpg321 -mkdir -p $PKG/usr/bin -cat mpg321 > $PKG/usr/bin/mpg321 -chmod 755 $PKG/usr/bin/mpg321 -( cd $PKG/usr/bin ; rm -f mpg123 ; ln -sf mpg321 mpg123 ) - -mkdir -p $PKG/usr/man/man1 -cat mpg321.1 | gzip -9c > $PKG/usr/man/man1/mpg321.1.gz - -mkdir -p $PKG/usr/doc/mpg321-$VERSION -cp -a \ - AUTHORS BUGS COPYING ChangeLog HACKING INSTALL NEWS \ - README README.remote THANKS TODO \ - $PKG/usr/doc/mpg321-$VERSION -chown -R root:root $PKG/usr/doc/mpg321-$VERSION +rm -rf RT2860_Firmware_V${VERSION} +unzip $CWD/RT2860_Firmware_V${VERSION}.zip || exit 1 +cd RT2860_Firmware_V${VERSION} + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Install: +mkdir -p $PKG/lib/firmware +mv LICEN* $PKG/lib/firmware/LICENSE.ralink-firmware-RT2860_Firmware_V${VERSION}.txt +mv * $PKG/lib/firmware mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -# Build the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/mpg321-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/n/rt2860-firmware/slack-desc b/source/n/rt2860-firmware/slack-desc new file mode 100644 index 000000000..6cdecaecf --- /dev/null +++ b/source/n/rt2860-firmware/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +rt2860-firmware: rt2860-firmware (RT28XX/RT30XX PCI/mPCI/PCIe/CardBus firmware) +rt2860-firmware: +rt2860-firmware: This is firmware for PCI, mPCI, PCIe, and Cardbus wireless cards +rt2860-firmware: using the Ralink RT2760, RT2790, RT2860, RT2890, RT3060, RT3062, +rt2860-firmware: RT3562, RT2860, RT2760, RT2890, RT2790, and RT3090 wireless chipsets. +rt2860-firmware: +rt2860-firmware: +rt2860-firmware: +rt2860-firmware: +rt2860-firmware: +rt2860-firmware: diff --git a/source/n/rt2870-firmware/rt2870-firmware.SlackBuild b/source/n/rt2870-firmware/rt2870-firmware.SlackBuild new file mode 100755 index 000000000..28542412e --- /dev/null +++ b/source/n/rt2870-firmware/rt2870-firmware.SlackBuild @@ -0,0 +1,60 @@ +#!/bin/sh + +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +CWD=$(pwd) + +PKGNAM=rt2870-firmware +VERSION=${VERSION:-22} +ARCH=${ARCH:-fw} +BUILD=${BUILD:-1} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} +rm -rf $PKG +mkdir -p $TMP $PKG + +cd $TMP +rm -rf RT2870_Firmware_V${VERSION} +unzip $CWD/RT2870_Firmware_V${VERSION}.zip || exit 1 +cd RT2870_Firmware_V${VERSION} + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 700 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Install: +mkdir -p $PKG/lib/firmware +mv LICEN* $PKG/lib/firmware/LICENSE.ralink-firmware-RT2870_Firmware_V${VERSION}.txt +mv * $PKG/lib/firmware + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/n/rt2870-firmware/slack-desc b/source/n/rt2870-firmware/slack-desc new file mode 100644 index 000000000..1b01f4947 --- /dev/null +++ b/source/n/rt2870-firmware/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +rt2870-firmware: rt2870-firmware (RT28XX/RT30XX USB firmware) +rt2870-firmware: +rt2870-firmware: This is firmware for USB wireless devices using Ralink RT2870, RT2770, +rt2870-firmware: RT3572, and RT3070 wireless chipsets. +rt2870-firmware: +rt2870-firmware: +rt2870-firmware: +rt2870-firmware: +rt2870-firmware: +rt2870-firmware: +rt2870-firmware: diff --git a/source/n/samba/samba.SlackBuild b/source/n/samba/samba.SlackBuild index e62aab09b..cf3918a19 100755 --- a/source/n/samba/samba.SlackBuild +++ b/source/n/samba/samba.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-3.2.13} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo samba-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-samba @@ -36,6 +45,13 @@ rm -rf samba-$VERSION tar xvf $CWD/samba-$VERSION.tar.?z* || exit 1 cd samba-$VERSION || exit 1 +if [ ! -d source3/lib/cmdline ]; then + ( cd source3/lib + mkdir cmdline + cd cmdline + ln -sf ../../../source3/include/popt_common.h . ) +fi + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -43,7 +59,7 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -cd source +cd source3 if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -58,11 +74,13 @@ fi # Some of these options could be auto-detected, but declaring them # here doesn't hurt and helps document what features we're trying to # build in. +# +# LDFLAGS are needed to avoid problems with missing symbols. +LDFLAGS="-Wl,--no-as-needed" \ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ - --with-libdir=/usr/lib${LIBDIRSUFFIX} \ --bindir=/usr/bin \ --sbindir=/usr/sbin \ --mandir=/usr/man \ @@ -80,6 +98,7 @@ CFLAGS="$SLKCFLAGS" \ --with-acl-support=yes \ --with-automount \ --with-cifsmount \ + --with-cifsumount \ --with-quotas \ --with-syslog \ --with-utmp \ @@ -107,8 +126,8 @@ make install-everything DESTDIR=$PKG || exit 1 # Install libnss_win* libraries: mkdir -p $PKG/lib${LIBDIRSUFFIX} -cp -a nsswitch/libnss_winbind.so $PKG/lib${LIBDIRSUFFIX}/libnss_winbind.so.2 -cp -a nsswitch/libnss_wins.so $PKG/lib${LIBDIRSUFFIX}/libnss_wins.so.2 +cp -a ../nsswitch/libnss_winbind.so $PKG/lib${LIBDIRSUFFIX}/libnss_winbind.so.2 +cp -a ../nsswitch/libnss_wins.so $PKG/lib${LIBDIRSUFFIX}/libnss_wins.so.2 ( cd $PKG/lib${LIBDIRSUFFIX} ln -sf libnss_winbind.so.2 libnss_winbind.so ln -sf libnss_wins.so.2 libnss_wins.so @@ -159,6 +178,10 @@ gzip -9 $PKG/usr/man/man?/*.? find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# PAM related stuff we don't use: +rm -r $PKG/usr/share/locale +rm -f $PKG/usr/man/man8/pam* + cd .. cp -a \ COPYING* MAINTAINERS Manifest PFIF.txt README* \ @@ -170,7 +193,6 @@ rm -rf $PKG/usr/doc/samba-$VERSION/docs/htmldocs \ mkdir -p $PKG/usr/doc/samba-$VERSION/docs ( cd $PKG/usr/doc/samba-$VERSION/docs ln -sf /usr/share/swat/help htmldocs - ln -sf /usr/share/swat/using_samba using_samba ) # I'm sorry, but when all this info is included in HTML, adding 7MB worth of # PDF files just to have extra artwork is more fluff than I'll agree to. diff --git a/source/n/samba/smb.conf.default b/source/n/samba/smb.conf.default index 68e62f930..44ba134f6 100644 --- a/source/n/samba/smb.conf.default +++ b/source/n/samba/smb.conf.default @@ -204,7 +204,7 @@ ; comment = Public Stuff ; path = /home/samba ; public = yes -; writable = yes +; writable = no ; printable = no ; write list = @staff diff --git a/source/n/samba/smb.conf.default.orig b/source/n/samba/smb.conf.default.orig index 971ca19c8..b4e3d63e0 100644 --- a/source/n/samba/smb.conf.default.orig +++ b/source/n/samba/smb.conf.default.orig @@ -204,7 +204,7 @@ ; comment = Public Stuff ; path = /home/samba ; public = yes -; writable = yes +; writable = no ; printable = no ; write list = @staff diff --git a/source/n/samba/smb.conf.diff b/source/n/samba/smb.conf.diff index 553440c54..3573a8f0b 100644 --- a/source/n/samba/smb.conf.diff +++ b/source/n/samba/smb.conf.diff @@ -1,5 +1,5 @@ ---- smb.conf.default.orig 2008-05-28 07:41:11.000000000 -0500 -+++ smb.conf.default 2008-05-28 13:53:01.000000000 -0500 +--- smb.conf.default.orig 2009-09-30 07:17:40.000000000 -0500 ++++ smb.conf.default 2009-10-03 15:59:26.000000000 -0500 @@ -22,7 +22,7 @@ #======================= Global Settings ===================================== [global] diff --git a/source/n/sendmail/SlackBuild-sendmail b/source/n/sendmail/SlackBuild-sendmail index 54dc0c5c2..aec918ca7 100755 --- a/source/n/sendmail/SlackBuild-sendmail +++ b/source/n/sendmail/SlackBuild-sendmail @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,18 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=8.14.3 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=8.14.4 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/n/sendmail/SlackBuild-sendmail-cf b/source/n/sendmail/SlackBuild-sendmail-cf index 3d7fd4524..d54370b98 100755 --- a/source/n/sendmail/SlackBuild-sendmail-cf +++ b/source/n/sendmail/SlackBuild-sendmail-cf @@ -20,9 +20,9 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=8.14.3 +VERSION=8.14.4 ARCH=noarch -BUILD=${BUILD:-2} +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} diff --git a/source/n/sendmail/site.config.m4 b/source/n/sendmail/site.config.m4 index 1f6c7f87c..09b1d72ff 100644 --- a/source/n/sendmail/site.config.m4 +++ b/source/n/sendmail/site.config.m4 @@ -1,3 +1,4 @@ +APPENDDEF(`confENVDEF', `-DNETINET6') APPENDDEF(`confMAPDEF', `-DNEWDB -DSTARTTLS -DSASL=2 -DTCPWRAPPERS -DNIS -DMAP_REGEX -DSOCKETMAP') APPENDDEF(`confLIBS', `-lnsl -lssl -lcrypto -lsasl2 -lwrap -lm -ldb -lresolv') APPENDDEF(`conf_libmilter_ENVDEF', `-DMILTER') diff --git a/source/n/slrn/doinst.sh b/source/n/slrn/doinst.sh index ad59028cd..23baae413 100644 --- a/source/n/slrn/doinst.sh +++ b/source/n/slrn/doinst.sh @@ -12,4 +12,5 @@ config() { } config etc/slrn.rc.new +config var/spool/slrnpull/slrnpull.conf.new diff --git a/source/n/slrn/slrn.SlackBuild b/source/n/slrn/slrn.SlackBuild index d2a50362e..d983724d3 100755 --- a/source/n/slrn/slrn.SlackBuild +++ b/source/n/slrn/slrn.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,17 @@ VERSION=0.9.9p1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -65,7 +77,7 @@ CFLAGS="$SLKCFLAGS" \ --docdir=/usr/doc/slrn-$VERSION \ --with-docdir=/usr/doc/slrn-$VERSION \ --with-ssl \ - --with-slrnpull \ + --with-slrnpull=/var/spool/slrnpull \ --enable-setgid-code \ --with-server-file=/etc/nntpserver \ --with-slanginc=/usr/include/slang \ @@ -92,7 +104,7 @@ rm -f $PKG/usr/doc/slrn-$VERSION/changes.txt chown root.news $PKG/usr/bin/slrnpull chmod 2750 $PKG/usr/bin/slrnpull mkdir -p $PKG/var/spool/slrnpull/{data,news,out.going/rejects} -cp -a $PKG/usr/doc/slrn-$VERSION/slrnpull/slrnpull.conf $PKG/var/spool/slrnpull +cp -a $PKG/usr/doc/slrn-$VERSION/slrnpull/slrnpull.conf $PKG/var/spool/slrnpull/slrnpull.conf.new chown -R news.news $PKG/var/spool/slrnpull chmod -R 3777 $PKG/var/spool/slrnpull/out.going diff --git a/source/n/snownews/snownews.SlackBuild b/source/n/snownews/snownews.SlackBuild index a8ac91857..724cab547 100755 --- a/source/n/snownews/snownews.SlackBuild +++ b/source/n/snownews/snownews.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.5.11 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=snownews +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -86,9 +99,17 @@ fi mkdir -p $PKG/usr/doc/snownews-$VERSION cp -a \ - AUTHOR COPYING* CREDITS Changelog INSTALL README* \ + AUTHOR COPYING* CREDITS INSTALL README* \ $PKG/usr/doc/snownews-$VERSION +# If there's a Changelog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r Changelog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat Changelog | head -n 1000 > $DOCSDIR/Changelog + touch -r Changelog $DOCSDIR/Changelog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/n/stunnel/stunnel.SlackBuild b/source/n/stunnel/stunnel.SlackBuild index 187dfa526..f988a3c4e 100755 --- a/source/n/stunnel/stunnel.SlackBuild +++ b/source/n/stunnel/stunnel.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.17 -ARCH=${ARCH:-x86_64} +PKGNAM=stunnel +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -47,7 +60,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf stunnel-$VERSION -tar xvf $CWD/stunnel-$VERSION.tar.gz || exit 1 +tar xvf $CWD/stunnel-$VERSION.tar.?z || exit 1 cd stunnel-$VERSION || exit 1 chown -R root:root . find . \ @@ -58,18 +71,27 @@ find . \ CFLAGS="$SLKCFLAGS" \ ./configure \ - --prefix= \ + --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --exec-prefix= \ --sysconfdir=/etc \ --datadir=/usr/share \ --mandir=/usr/man \ --sbindir=/usr/sbin \ + --bindir=/usr/bin \ --localstatedir=/var \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 +# This used to be installed in /usr/sbin, so it would probably be nice to +# link from there: +mkdir -p $PKG/usr/sbin +( cd $PKG/usr/sbin + ln -sf ../bin/stunnel . + ln -sf ../bin/stunnel3 . +) + mkdir -p $PKG/var/run/stunnel # This will produce a useless key. make -i install DESTDIR=$PKG @@ -100,6 +122,14 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ chmod 0755 $PKG/var/lib chown root:root $PKG/var/lib +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/n/tcpdump/libpcap.20-fix-any-intf.diff b/source/n/tcpdump/libpcap.20-fix-any-intf.diff new file mode 100644 index 000000000..84afa6822 --- /dev/null +++ b/source/n/tcpdump/libpcap.20-fix-any-intf.diff @@ -0,0 +1,159 @@ +commit 8fa17a5a554aaeb85d3ec4118b45a31f1efd6808 +Author: guy <guy> +Date: Wed Nov 19 08:20:39 2008 +0000 + + Fix the handling of the "any" device, including making it reject + attempts to open it in monitor mode. +--- + pcap-linux.c | 68 ++++++++++++++++++++++++++++++++++++----------------------- + 1 file changed, 42 insertions(+), 26 deletions(-) + +--- a/pcap-linux.c ++++ b/pcap-linux.c +@@ -297,6 +297,12 @@ + { + pcap_t *handle; + ++ /* ++ * A null device name is equivalent to the "any" device. ++ */ ++ if (device == NULL) ++ device = "any"; ++ + #ifdef HAVE_DAG_API + if (strstr(device, "dag")) { + return dag_create(device, ebuf); +@@ -338,10 +344,9 @@ + struct iwreq ireq; + #endif + +- if (p->opt.source == NULL) { ++ if (strcmp(p->opt.source, "any") == 0) { + /* +- * This is equivalent to the "any" device, and we don't +- * support monitor mode on it. ++ * Monitor mode makes no sense on the "any" device. + */ + return 0; + } +@@ -518,12 +523,11 @@ + handle->stats_op = pcap_stats_linux; + + /* +- * NULL and "any" are special devices which give us the hint to +- * monitor all devices. ++ * The "any" device is a special device which causes us not ++ * to bind to a particular device and thus to look at all ++ * devices. + */ +- if (!device || strcmp(device, "any") == 0) { +- device = NULL; +- handle->md.device = strdup("any"); ++ if (strcmp(device, "any") == 0) { + if (handle->opt.promisc) { + handle->opt.promisc = 0; + /* Just a warning. */ +@@ -531,10 +535,9 @@ + "Promiscuous mode not supported on the \"any\" device"); + status = PCAP_WARNING_PROMISC_NOTSUP; + } ++ } + +- } else +- handle->md.device = strdup(device); +- ++ handle->md.device = strdup(device); + if (handle->md.device == NULL) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "strdup: %s", + pcap_strerror(errno) ); +@@ -1657,19 +1660,21 @@ + activate_new(pcap_t *handle) + { + #ifdef HAVE_PF_PACKET_SOCKETS ++ const char *device = handle->opt.source; ++ int is_any_device = (strcmp(device, "any") == 0); + int sock_fd = -1, arptype, val; + int err = 0; + struct packet_mreq mr; +- const char* device = handle->opt.source; + + /* +- * Open a socket with protocol family packet. If a device is +- * given we try to open it in raw mode otherwise we use +- * the cooked interface. +- */ +- sock_fd = device ? +- socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)) +- : socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_ALL)); ++ * Open a socket with protocol family packet. If the ++ * "any" device was specified, we open a SOCK_DGRAM ++ * socket for the cooked interface, otherwise we first ++ * try a SOCK_RAW socket for the raw interface. ++ */ ++ sock_fd = is_any_device ? ++ socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_ALL)) : ++ socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); + + if (sock_fd == -1) { + snprintf(handle->errbuf, PCAP_ERRBUF_SIZE, "socket: %s", +@@ -1704,7 +1709,7 @@ + * to cooked mode if we have an unknown interface type + * or a type we know doesn't work well in raw mode. + */ +- if (device) { ++ if (!is_any_device) { + /* Assume for now we don't need cooked mode. */ + handle->md.cooked = 0; + +@@ -1819,15 +1824,23 @@ + } + } else { + /* +- * This is cooked mode. ++ * The "any" device. ++ */ ++ if (handle->opt.rfmon) { ++ /* ++ * It doesn't support monitor mode. ++ */ ++ return PCAP_ERROR_RFMON_NOTSUP; ++ } ++ ++ /* ++ * It uses cooked mode. + */ + handle->md.cooked = 1; + handle->linktype = DLT_LINUX_SLL; + + /* + * We're not bound to a device. +- * XXX - true? Or true only if we're using +- * the "any" device? + * For now, we're using this as an indication + * that we can't transmit; stop doing that only + * if we figure out how to transmit in cooked +@@ -1852,10 +1865,13 @@ + + /* + * Hmm, how can we set promiscuous mode on all interfaces? +- * I am not sure if that is possible at all. ++ * I am not sure if that is possible at all. For now, we ++ * silently ignore attempts to turn promiscuous mode on ++ * for the "any" device (so you don't have to explicitly ++ * disable it in programs such as tcpdump). + */ + +- if (device && handle->opt.promisc) { ++ if (!is_any_device && handle->opt.promisc) { + memset(&mr, 0, sizeof(mr)); + mr.mr_ifindex = handle->md.ifindex; + mr.mr_type = PACKET_MR_PROMISC; +@@ -3118,7 +3134,7 @@ + + /* Bind to the given device */ + +- if (!device) { ++ if (strcmp(device, "any") == 0) { + strncpy(handle->errbuf, "pcap_activate: The \"any\" device isn't supported on 2.0[.x]-kernel systems", + PCAP_ERRBUF_SIZE); + return PCAP_ERROR; diff --git a/source/n/tcpdump/tcpdump.SlackBuild b/source/n/tcpdump/tcpdump.SlackBuild index ec1d39ee9..15715c567 100755 --- a/source/n/tcpdump/tcpdump.SlackBuild +++ b/source/n/tcpdump/tcpdump.SlackBuild @@ -22,8 +22,17 @@ VERSION=4.0.0 LIBVER=1.0.0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -47,6 +56,9 @@ cd $TMP rm -rf libpcap-$LIBVER tar xvf $CWD/libpcap-$LIBVER.tar.gz || exit 1 cd libpcap-$LIBVER || exit 1 + +zcat $CWD/libpcap.20-fix-any-intf.diff.gz | patch -p1 --verbose || exit 1 + find . -type d -name CVS -depth -exec rm -rf {} \; chown -R root:root . find . \ @@ -63,8 +75,16 @@ CFLAGS="$(getconf LFS_CFLAGS)" \ --enable-ipv6 \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 +make shared $NUMJOBS || make || exit 1 mkdir -p $PKG/usr/bin # otherwise it errors out on install make install DESTDIR=$PKG || exit 1 +strip --strip-debug libpcap.so.1.?.? +cp libpcap.so.?.?.? $PKG/usr/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + ln -sf libpcap.so.1.?.? libpcap.so.1 + ln -sf libpcap.so.1 libpcap.so.0 + ln -sf libpcap.so.1 libpcap.so +) mkdir -p $PKG/usr/doc/libpcap-$LIBVER cp -a \ CHANGES CREDITS FILES INSTALL.txt LICENSE README README.linux TODO VERSION \ diff --git a/source/n/tftp-hpa/tftp-hpa-0.48.tar.bz2.sign b/source/n/tftp-hpa/tftp-hpa-0.48.tar.bz2.sign deleted file mode 100644 index 0bc250608..000000000 --- a/source/n/tftp-hpa/tftp-hpa-0.48.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.4.6 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQBFwHdCyGugalF9Dw4RArMGAJsGmXTId7KWtaaPU59qtvxfVqR2hACfV4pp -QP4kzEDqgKlRw3+FYQsQMvY= -=jnKl ------END PGP SIGNATURE----- diff --git a/source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2.sign b/source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2.sign new file mode 100644 index 000000000..de4c7fbb4 --- /dev/null +++ b/source/n/tftp-hpa/tftp-hpa-0.49.tar.bz2.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBI/QH7yGugalF9Dw4RAjZZAJ0Ro/KGEOFgQt0Ewk6BRuYQpnv/lQCfUIIJ +lyM+y31FV4/xhLoNKcr8JtA= +=X8qg +-----END PGP SIGNATURE----- diff --git a/source/n/tftp-hpa/tftp-hpa.SlackBuild b/source/n/tftp-hpa/tftp-hpa.SlackBuild index c73c882f1..6fcc104ff 100755 --- a/source/n/tftp-hpa/tftp-hpa.SlackBuild +++ b/source/n/tftp-hpa/tftp-hpa.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.48 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=tftp-hpa +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-tftp-hpa diff --git a/source/n/traceroute/traceroute.SlackBuild b/source/n/traceroute/traceroute.SlackBuild index b687a436e..069ce1f18 100755 --- a/source/n/traceroute/traceroute.SlackBuild +++ b/source/n/traceroute/traceroute.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,20 +21,29 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.4a12 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=traceroute +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" +if [ "$ARCH" = "x86_64" ]; then + LIBDIRSUFFIX=64 +else + LIBDIRSUFFIX= fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-traceroute @@ -53,25 +62,26 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -zcat $CWD/traceroute_$VERSION-5.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 -zcat $CWD/traceroute.no.domain.strip.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 +make $NUMJOBS VPATH=/usr/lib${LIBDIRSUFFIX} || make VPATH=/usr/lib${LIBDIRSUFFIX} || exit 1 -CFLAGS="$SLKCFLAGS -Ilinux-include" ./configure --prefix=/usr -make $NUMJOBS || make || exit 1 - -strip traceroute mkdir -p $PKG/usr/bin -cat traceroute > $PKG/usr/bin/traceroute -chmod 4711 $PKG/usr/bin/traceroute +cat traceroute/traceroute > $PKG/usr/bin/traceroute +chmod 755 $PKG/usr/bin/traceroute + +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) mkdir -p $PKG/usr/man/man8 -gzip -9c traceroute.8 > $PKG/usr/man/man8/traceroute.8.gz +cat traceroute/traceroute.8 | gzip -9c > $PKG/usr/man/man8/traceroute.8.gz mkdir -p $PKG/usr/doc/traceroute-$VERSION cp -a \ - CHANGES FILES INSTALL README VERSION \ + COPYING* CREDITS ChangeLog README* TODO VERSION \ + wrappers \ $PKG/usr/doc/traceroute-$VERSION -chmod 644 $PKG/usr/doc/traceroute-$VERSION/* mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/n/traceroute/traceroute.no.domain.strip.diff b/source/n/traceroute/traceroute.no.domain.strip.diff deleted file mode 100644 index a9af38933..000000000 --- a/source/n/traceroute/traceroute.no.domain.strip.diff +++ /dev/null @@ -1,30 +0,0 @@ ---- traceroute-1.4a12.orig/traceroute.c Tue Feb 4 11:01:05 2003 -+++ traceroute-1.4a12/traceroute.c Tue Feb 4 11:09:17 2003 -@@ -1297,8 +1297,10 @@ - register char *cp; - register struct hostent *hp; - static int first = 1; -- static char domain[MAXHOSTNAMELEN + 1], line[MAXHOSTNAMELEN + 1]; -+/* static char domain[MAXHOSTNAMELEN + 1]; */ -+ static char line[MAXHOSTNAMELEN + 1]; - -+/* - if (first && !nflag) { - first = 0; - if (gethostname(domain, sizeof(domain) - 1) < 0) -@@ -1319,12 +1321,15 @@ - } - } - } -+*/ - if (!nflag && in.s_addr != INADDR_ANY) { - hp = gethostbyaddr((char *)&in, sizeof(in), AF_INET); - if (hp != NULL) { -+/* - if ((cp = strchr(hp->h_name, '.')) != NULL && - strcmp(cp + 1, domain) == 0) - *cp = '\0'; -+*/ - (void)strncpy(line, hp->h_name, sizeof(line) - 1); - line[sizeof(line) - 1] = '\0'; - return (line); diff --git a/source/n/traceroute/traceroute_1.4a12-5.diff b/source/n/traceroute/traceroute_1.4a12-5.diff deleted file mode 100644 index 8cf3d1fe1..000000000 --- a/source/n/traceroute/traceroute_1.4a12-5.diff +++ /dev/null @@ -1,1152 +0,0 @@ ---- traceroute-1.4a12.orig/aclocal.m4 -+++ traceroute-1.4a12/aclocal.m4 -@@ -47,7 +47,7 @@ - AC_BEFORE([$0], [AC_LBL_FIXINCLUDES]) - AC_BEFORE([$0], [AC_LBL_DEVEL]) - AC_ARG_WITH(gcc, [ --without-gcc don't use gcc]) -- $1="-O" -+ $1="-g -O" - $2="" - if test "${srcdir}" != "." ; then - $2="-I\$\(srcdir\)" -@@ -677,12 +677,11 @@ - AC_TRY_LINK(dnl - ifelse([$2], [main], , dnl Avoid conflicting decl of main. - [/* Override any gcc2 internal prototype to avoid an error. */ --]ifelse(AC_LANG, CPLUSPLUS, [#ifdef __cplusplus -+#ifdef __cplusplus - extern "C" - #endif --])dnl --[/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ - char $2(); - ]), - [$2()], ---- traceroute-1.4a12.orig/configure.in -+++ traceroute-1.4a12/configure.in -@@ -22,7 +22,7 @@ - net/if_dl.h inet/mib2.h) - - AC_REPLACE_FUNCS(strerror usleep) --AC_CHECK_FUNCS(setlinebuf) -+AC_CHECK_FUNCS(setlinebuf snprintf) - if test $ac_cv_func_usleep = "no" ; then - AC_CHECK_FUNCS(nanosleep) - fi -@@ -44,8 +44,9 @@ - ;; - - linux*) -- V_INCLS="$V_INCLS -Ilinux-include" -+ V_INCLS="$V_INCLS -Ilinux-include -DUSE_KERNEL_ROUTING_TABLE" - AC_DEFINE(BYTESWAP_IP_HDR) -+ AC_DEFINE(HAVE_RAW_OPTIONS) - ;; - - osf3*) ---- traceroute-1.4a12.orig/findsaddr-generic.c -+++ traceroute-1.4a12/findsaddr-generic.c -@@ -82,7 +82,11 @@ - static char errbuf[132]; - - /* Get the interface address list */ -+#if HAVE_SNPRINTF -+ if ((n = ifaddrlist(&al, errbuf, sizeof(errbuf))) < 0) -+#else - if ((n = ifaddrlist(&al, errbuf)) < 0) -+#endif - return (errbuf); - - if (n == 0) ---- traceroute-1.4a12.orig/findsaddr-linux.c -+++ traceroute-1.4a12/findsaddr-linux.c -@@ -90,7 +90,11 @@ - static char errbuf[132]; - - if ((f = fopen(route, "r")) == NULL) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "open %s: %.128s", route, strerror(errno)); -+#else - sprintf(errbuf, "open %s: %.128s", route, strerror(errno)); -+#endif - return (errbuf); - } - -@@ -102,7 +106,7 @@ - ++n; - if (n == 1 && strncmp(buf, "Iface", 5) == 0) - continue; -- if ((i = sscanf(buf, "%s %x %*s %*s %*s %*s %*s %x", -+ if ((i = sscanf(buf, "%255s %x %*s %*s %*s %*s %*s %x", - tdevice, &dest, &tmask)) != 3) - return ("junk in buffer"); - if ((to->sin_addr.s_addr & tmask) == dest && -@@ -117,7 +121,11 @@ - return ("Can't find interface"); - - /* Get the interface address list */ -+#if HAVE_SNPRINTF -+ if ((n = ifaddrlist(&al, errbuf, sizeof(errbuf))) < 0) -+#else - if ((n = ifaddrlist(&al, errbuf)) < 0) -+#endif - return (errbuf); - - if (n == 0) -@@ -128,7 +136,11 @@ - if (strcmp(device, al->device) == 0) - break; - if (i <= 0) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "Can't find interface \"%.32s\"", device); -+#else - sprintf(errbuf, "Can't find interface \"%.32s\"", device); -+#endif - return (errbuf); - } - ---- traceroute-1.4a12.orig/findsaddr-socket.c -+++ traceroute-1.4a12/findsaddr-socket.c -@@ -114,7 +114,11 @@ - - s = socket(PF_ROUTE, SOCK_RAW, AF_UNSPEC); - if (s < 0) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "socket: %.128s", strerror(errno)); -+#else - sprintf(errbuf, "socket: %.128s", strerror(errno)); -+#endif - return (errbuf); - } - -@@ -134,12 +138,20 @@ - - cc = write(s, (char *)rp, size); - if (cc < 0) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "write: %.128s", strerror(errno)); -+#else - sprintf(errbuf, "write: %.128s", strerror(errno)); -+#endif - close(s); - return (errbuf); - } - if (cc != size) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "short write (%d != %d)", cc, size); -+#else - sprintf(errbuf, "short write (%d != %d)", cc, size); -+#endif - close(s); - return (errbuf); - } -@@ -149,7 +161,11 @@ - memset(rp, 0, size); - cc = read(s, (char *)rp, size); - if (cc < 0) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "read: %.128s", strerror(errno)); -+#else - sprintf(errbuf, "read: %.128s", strerror(errno)); -+#endif - close(s); - return (errbuf); - } -@@ -159,15 +175,27 @@ - - - if (rp->rtm_version != RTM_VERSION) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "bad version %d", rp->rtm_version); -+#else - sprintf(errbuf, "bad version %d", rp->rtm_version); -+#endif - return (errbuf); - } - if (rp->rtm_msglen > cc) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "bad msglen %d > %d", rp->rtm_msglen, cc); -+#else - sprintf(errbuf, "bad msglen %d > %d", rp->rtm_msglen, cc); -+#endif - return (errbuf); - } - if (rp->rtm_errno != 0) { -+#if HAVE_SNPRINTF -+ snprintf(errbuf, sizeof(errbuf), "rtm_errno: %.128s", strerror(rp->rtm_errno)); -+#else - sprintf(errbuf, "rtm_errno: %.128s", strerror(rp->rtm_errno)); -+#endif - return (errbuf); - } - ---- traceroute-1.4a12.orig/ifaddrlist.c -+++ traceroute-1.4a12/ifaddrlist.c -@@ -72,7 +72,12 @@ - * Return the interface list - */ - int -+#if HAVE_SNPRINTF -+ifaddrlist(register struct ifaddrlist **ipaddrp, register char *errbuf, -+ size_t nerrbuf) -+#else - ifaddrlist(register struct ifaddrlist **ipaddrp, register char *errbuf) -+#endif - { - register int fd, nipaddr; - #ifdef HAVE_SOCKADDR_SA_LEN -@@ -89,7 +94,11 @@ - - fd = socket(AF_INET, SOCK_DGRAM, 0); - if (fd < 0) { -+#if HAVE_SNPRINTF -+ (void)snprintf(errbuf, nerrbuf, "socket: %s", strerror(errno)); -+#else - (void)sprintf(errbuf, "socket: %s", strerror(errno)); -+#endif - return (-1); - } - ifc.ifc_len = sizeof(ibuf); -@@ -98,12 +107,23 @@ - if (ioctl(fd, SIOCGIFCONF, (char *)&ifc) < 0 || - ifc.ifc_len < sizeof(struct ifreq)) { - if (errno == EINVAL) -+#if HAVE_SNPRINTF -+ (void)snprintf(errbuf, nerrbuf, -+ "SIOCGIFCONF: ifreq struct too small (%d bytes)", -+ sizeof(ibuf)); -+#else - (void)sprintf(errbuf, - "SIOCGIFCONF: ifreq struct too small (%d bytes)", - sizeof(ibuf)); -+#endif - else -+#if HAVE_SNPRINTF -+ (void)snprintf(errbuf, nerrbuf, "SIOCGIFCONF: %s", -+ strerror(errno)); -+#else - (void)sprintf(errbuf, "SIOCGIFCONF: %s", - strerror(errno)); -+#endif - (void)close(fd); - return (-1); - } -@@ -135,9 +155,15 @@ - if (ioctl(fd, SIOCGIFFLAGS, (char *)&ifr) < 0) { - if (errno == ENXIO) - continue; -+#if HAVE_SNPRINTF -+ (void)snprintf(errbuf, nerrbuf, "SIOCGIFFLAGS: %.*s: %s", -+ (int)sizeof(ifr.ifr_name), ifr.ifr_name, -+ strerror(errno)); -+#else - (void)sprintf(errbuf, "SIOCGIFFLAGS: %.*s: %s", - (int)sizeof(ifr.ifr_name), ifr.ifr_name, - strerror(errno)); -+#endif - (void)close(fd); - return (-1); - } -@@ -155,21 +181,35 @@ - continue; - #endif - if (ioctl(fd, SIOCGIFADDR, (char *)&ifr) < 0) { -+#if HAVE_SNPRINTF -+ (void)snprintf(errbuf, nerrbuf, "SIOCGIFADDR: %s: %s", -+ device, strerror(errno)); -+#else - (void)sprintf(errbuf, "SIOCGIFADDR: %s: %s", - device, strerror(errno)); -+#endif - (void)close(fd); - return (-1); - } - - if (nipaddr >= MAX_IPADDR) { -+#if HAVE_SNPRINTF -+ (void)snprintf(errbuf, nerrbuf, "Too many interfaces (%d)", -+ MAX_IPADDR); -+#else - (void)sprintf(errbuf, "Too many interfaces (%d)", - MAX_IPADDR); -+#endif - (void)close(fd); - return (-1); - } - sin = (struct sockaddr_in *)&ifr.ifr_addr; - al->addr = sin->sin_addr.s_addr; - al->device = strdup(device); -+ if (al->device == NULL) { -+ fputs("ifaddrlist: strdup\n", stderr); -+ exit(1); -+ } - ++al; - ++nipaddr; - } ---- traceroute-1.4a12.orig/ifaddrlist.h -+++ traceroute-1.4a12/ifaddrlist.h -@@ -26,4 +26,8 @@ - char *device; - }; - -+#if HAVE_SNPRINTF -+int ifaddrlist(struct ifaddrlist **, char *, size_t); -+#else - int ifaddrlist(struct ifaddrlist **, char *); -+#endif ---- traceroute-1.4a12.orig/traceroute.8 -+++ traceroute-1.4a12/traceroute.8 -@@ -23,7 +23,7 @@ - .na - .B traceroute - [ --.B \-dFInrvx -+.B \-dFIlnrvx - ] [ - .B \-f - .I first_ttl -@@ -110,6 +110,10 @@ - .B \-I - Use ICMP ECHO instead of UDP datagrams. - .TP -+.B \-l -+Display the ttl value of the returned packet. This is useful for -+checking for assymetric routing. -+.TP - .B \-m - Set the max time-to-live (max number of hops) used in outgoing probe - packets. The default is 30 hops (the same default used for TCP -@@ -146,9 +150,8 @@ - multi-homed hosts (those with more than one IP - address), this option can be used to - force the source address to be something other than the IP address --of the interface the probe packet is sent on. If the IP address --is not one of this machine's interface addresses, an error is --returned and nothing is sent. (See the -+of the interface the probe packet is sent on. This option can only -+be used by the super-user. (See the - .B \-i - flag for another way to do this.) - .TP -@@ -329,6 +332,9 @@ - or - .B !P - (host, network or protocol unreachable), -+.BR !A , -+.BR !C -+(access to the network or host, respectively, is prohibited), - .B !S - (source route failed), - .B !F\-<pmtu> ---- traceroute-1.4a12.orig/traceroute.c -+++ traceroute-1.4a12/traceroute.c -@@ -271,7 +271,7 @@ - struct outdata { - u_char seq; /* sequence number of this packet */ - u_char ttl; /* ttl packet left with */ -- struct timeval tv; /* time packet left */ -+ struct timeval tv __attribute__((packed)); /* time packet left */ - }; - - #ifndef HAVE_ICMP_NEXTMTU -@@ -296,8 +296,8 @@ - int s; /* receive (icmp) socket file descriptor */ - int sndsock; /* send (udp/icmp) socket file descriptor */ - --struct sockaddr whereto; /* Who to try to reach */ --struct sockaddr wherefrom; /* Who we are */ -+struct sockaddr_storage whereto; /* Who to try to reach */ -+struct sockaddr_storage wherefrom; /* Who we are */ - int packlen; /* total length of packet */ - int minpacket; /* min ip packet size */ - int maxpacket = 32 * 1024; /* max ip packet size */ -@@ -352,6 +352,11 @@ - int usleep(u_int); - #endif - -+#ifdef USE_KERNEL_ROUTING_TABLE -+struct ifaddrlist *search_routing_table(struct sockaddr_in *to, struct ifaddrlist *al, int n); -+#endif -+ -+ - int - main(int argc, char **argv) - { -@@ -370,8 +375,12 @@ - int tos = 0, settos = 0; - register int lsrr = 0; - register u_short off = 0; -- struct ifaddrlist *al; -+ struct ifaddrlist *al, *allist; - char errbuf[132]; -+ int ttl_flag = 0; -+ int uid; -+ -+ uid = getuid(); - - if (argv[0] == NULL) - prog = "traceroute"; -@@ -381,7 +390,7 @@ - prog = argv[0]; - - opterr = 0; -- while ((op = getopt(argc, argv, "dFInrvxf:g:i:m:p:q:s:t:w:z:")) != EOF) -+ while ((op = getopt(argc, argv, "dFIlnrvxf:g:i:m:p:q:s:t:w:z:")) != EOF) - switch (op) { - - case 'd': -@@ -397,6 +406,10 @@ - break; - - case 'g': -+ if (strlen(optarg) >= MAXHOSTNAMELEN) { -+ Fprintf(stderr, "%s: Nice Try !\n", prog); -+ exit(-1); -+ } - if (lsrr >= NGATEWAYS) { - Fprintf(stderr, - "%s: No more than %d gateways\n", -@@ -409,12 +422,21 @@ - - case 'i': - device = optarg; -+ if (strlen(device) >= 16) { /* that is the IFNAMSIZ -+ * from kernel headers */ -+ Fprintf(stderr, "%s: Nice try !\n", prog); -+ exit(-1); -+ } - break; - - case 'I': - ++useicmp; - break; - -+ case 'l': -+ ++ttl_flag; -+ break; -+ - case 'm': - max_ttl = str2val(optarg, "max ttl", 1, 255); - break; -@@ -441,7 +463,19 @@ - * set the ip source address of the outbound - * probe (e.g., on a multi-homed host). - */ -+ if (uid) { -+ Fprintf( -+ stderr, -+ "%s: -s %s: Permission denied\n", -+ prog, optarg -+ ); -+ exit(-1); -+ } - source = optarg; -+ if (strlen(source) >= MAXHOSTNAMELEN) { -+ Fprintf(stderr, "%s: Nice Try !\n", prog); -+ exit(-1); -+ } - break; - - case 't': -@@ -500,6 +534,10 @@ - - case 1: - hostname = argv[optind]; -+ if (strlen(hostname) >= MAXHOSTNAMELEN) { -+ Fprintf(stderr, "%s: Nice try !\n", prog); -+ exit(-1); -+ } - hi = gethostinfo(hostname); - setsin(to, hi->addrs[0]); - if (hi->n > 1) -@@ -515,75 +553,6 @@ - usage(); - } - --#ifdef HAVE_SETLINEBUF -- setlinebuf (stdout); --#else -- setvbuf(stdout, NULL, _IOLBF, 0); --#endif -- -- outip = (struct ip *)malloc((unsigned)packlen); -- if (outip == NULL) { -- Fprintf(stderr, "%s: malloc: %s\n", prog, strerror(errno)); -- exit(1); -- } -- memset((char *)outip, 0, packlen); -- -- outip->ip_v = IPVERSION; -- if (settos) -- outip->ip_tos = tos; --#ifdef BYTESWAP_IP_HDR -- outip->ip_len = htons(packlen); -- outip->ip_off = htons(off); --#else -- outip->ip_len = packlen; -- outip->ip_off = off; --#endif -- outp = (u_char *)(outip + 1); --#ifdef HAVE_RAW_OPTIONS -- if (lsrr > 0) { -- register u_char *optlist; -- -- optlist = outp; -- outp += optlen; -- -- /* final hop */ -- gwlist[lsrr] = to->sin_addr.s_addr; -- -- outip->ip_dst.s_addr = gwlist[0]; -- -- /* force 4 byte alignment */ -- optlist[0] = IPOPT_NOP; -- /* loose source route option */ -- optlist[1] = IPOPT_LSRR; -- i = lsrr * sizeof(gwlist[0]); -- optlist[2] = i + 3; -- /* Pointer to LSRR addresses */ -- optlist[3] = IPOPT_MINOFF; -- memcpy(optlist + 4, gwlist + 1, i); -- } else --#endif -- outip->ip_dst = to->sin_addr; -- -- outip->ip_hl = (outp - (u_char *)outip) >> 2; -- ident = (getpid() & 0xffff) | 0x8000; -- if (useicmp) { -- outip->ip_p = IPPROTO_ICMP; -- -- outicmp = (struct icmp *)outp; -- outicmp->icmp_type = ICMP_ECHO; -- outicmp->icmp_id = htons(ident); -- -- outdata = (struct outdata *)(outp + 8); /* XXX magic number */ -- } else { -- outip->ip_p = IPPROTO_UDP; -- -- outudp = (struct udphdr *)outp; -- outudp->uh_sport = htons(ident); -- outudp->uh_ulen = -- htons((u_short)(packlen - (sizeof(*outip) + optlen))); -- outdata = (struct outdata *)(outudp + 1); -- } -- - cp = "icmp"; - if ((pe = getprotobyname(cp)) == NULL) { - Fprintf(stderr, "%s: unknown protocol %s\n", prog, cp); -@@ -591,12 +560,15 @@ - } - - /* Insure the socket fds won't be 0, 1 or 2 */ -- if (open(devnull, O_RDONLY) < 0 || -- open(devnull, O_RDONLY) < 0 || -- open(devnull, O_RDONLY) < 0) { -- Fprintf(stderr, "%s: open \"%s\": %s\n", -- prog, devnull, strerror(errno)); -- exit(1); -+ do { -+ if ((n = open(devnull, O_RDONLY)) < 0) { -+ Fprintf(stderr, "%s: open \"%s\": %s\n", -+ prog, devnull, strerror(errno)); -+ exit(1); -+ } -+ } while (n < 2); -+ if (n > 2) { -+ close(n); - } - if ((s = socket(AF_INET, SOCK_RAW, pe->p_proto)) < 0) { - Fprintf(stderr, "%s: icmp socket: %s\n", prog, strerror(errno)); -@@ -662,7 +634,7 @@ - #endif - #ifdef IP_HDRINCL - if (setsockopt(sndsock, IPPROTO_IP, IP_HDRINCL, (char *)&on, -- sizeof(on)) < 0) { -+ sizeof(on)) < 0 && errno != ENOPROTOOPT) { - Fprintf(stderr, "%s: IP_HDRINCL: %s\n", prog, strerror(errno)); - exit(1); - } -@@ -683,8 +655,88 @@ - (void)setsockopt(sndsock, SOL_SOCKET, SO_DONTROUTE, (char *)&on, - sizeof(on)); - -+ /* Revert to non-privileged user after opening sockets */ -+ setgid(getgid()); -+ setuid(uid); -+ -+#ifndef __GLIBC__ -+#ifdef HAVE_SETLINEBUF -+ setlinebuf (stdout); -+#else -+ setvbuf(stdout, NULL, _IOLBF, 0); -+#endif -+#endif -+ -+ outip = (struct ip *)malloc((unsigned)packlen); -+ if (outip == NULL) { -+ Fprintf(stderr, "%s: malloc: %s\n", prog, strerror(errno)); -+ exit(1); -+ } -+ memset((char *)outip, 0, packlen); -+ -+ outip->ip_v = IPVERSION; -+ if (settos) -+ outip->ip_tos = tos; -+#ifdef BYTESWAP_IP_HDR -+ outip->ip_len = htons(packlen); -+ outip->ip_off = htons(off); -+#else -+ outip->ip_len = packlen; -+ outip->ip_off = off; -+#endif -+ outp = (u_char *)(outip + 1); -+#ifdef HAVE_RAW_OPTIONS -+ if (lsrr > 0) { -+ register u_char *optlist; -+ -+ optlist = outp; -+ outp += optlen; -+ -+ /* final hop */ -+ gwlist[lsrr] = to->sin_addr.s_addr; -+ -+ outip->ip_dst.s_addr = gwlist[0]; -+ -+ /* force 4 byte alignment */ -+ optlist[0] = IPOPT_NOP; -+ /* loose source route option */ -+ optlist[1] = IPOPT_LSRR; -+ i = lsrr * sizeof(gwlist[0]); -+ optlist[2] = i + 3; -+ /* Pointer to LSRR addresses */ -+ optlist[3] = IPOPT_MINOFF; -+ memcpy(optlist + 4, gwlist + 1, i); -+ } else -+#endif -+ outip->ip_dst = to->sin_addr; -+ -+ outip->ip_hl = (outp - (u_char *)outip) >> 2; -+ ident = (getpid() & 0xffff) | 0x8000; -+ if (useicmp) { -+ outip->ip_p = IPPROTO_ICMP; -+ -+ outicmp = (struct icmp *)outp; -+ outicmp->icmp_type = ICMP_ECHO; -+ outicmp->icmp_id = htons(ident); -+ -+ outdata = (struct outdata *)(outp + 8); /* XXX magic number */ -+ } else { -+ outip->ip_p = IPPROTO_UDP; -+ -+ outudp = (struct udphdr *)outp; -+ outudp->uh_sport = htons(ident); -+ outudp->uh_ulen = -+ htons((u_short)(packlen - (sizeof(*outip) + optlen))); -+ outdata = (struct outdata *)(outudp + 1); -+ } -+ - /* Get the interface address list */ -- n = ifaddrlist(&al, errbuf); -+#if HAVE_SNPRINTF -+ n = ifaddrlist(&allist, errbuf, sizeof(errbuf)); -+#else -+ n = ifaddrlist(&allist, errbuf); -+#endif -+ al = allist; - if (n < 0) { - Fprintf(stderr, "%s: ifaddrlist: %s\n", prog, errbuf); - exit(1); -@@ -709,6 +761,15 @@ - - /* Determine our source address */ - if (source == NULL) { -+#ifdef USE_KERNEL_ROUTING_TABLE -+ /* Search the kernel routing table for a match with the -+ * destination address. Then use that interface. If -+ * there is no match, default to using the first -+ * interface found. -+ */ -+ al = search_routing_table(to, allist, n); -+ setsin(from, al->addr); -+#else - /* - * If a device was specified, use the interface address. - * Otherwise, try to determine our source address. -@@ -720,6 +781,7 @@ - prog, err); - exit(1); - } -+#endif - } else { - hi = gethostinfo(source); - source = hi->name; -@@ -751,10 +813,6 @@ - freehostinfo(hi); - } - -- /* Revert to non-privileged user after opening sockets */ -- setgid(getgid()); -- setuid(getuid()); -- - outip->ip_src = from->sin_addr; - #ifndef IP_HDRINCL - if (bind(sndsock, (struct sockaddr *)from, sizeof(*from)) < 0) { -@@ -803,9 +861,11 @@ - ++gotlastaddr; - } - Printf(" %.3f ms", deltaT(&t1, &t2)); -+ ip = (struct ip *)packet; -+ if (ttl_flag) -+ Printf(" (%d)", ip->ip_ttl); - if (i == -2) { - #ifndef ARCHAIC -- ip = (struct ip *)packet; - if (ip->ip_ttl <= 1) - Printf(" !"); - #endif -@@ -820,7 +880,6 @@ - - case ICMP_UNREACH_PORT: - #ifndef ARCHAIC -- ip = (struct ip *)packet; - if (ip->ip_ttl <= 1) - Printf(" !"); - #endif -@@ -853,8 +912,14 @@ - break; - - case ICMP_UNREACH_FILTER_PROHIB: -+ case ICMP_UNREACH_NET_PROHIB: /* misuse */ -+ ++unreachable; -+ Printf(" !A"); -+ break; -+ -+ case ICMP_UNREACH_HOST_PROHIB: - ++unreachable; -- Printf(" !X"); -+ Printf(" !C"); - break; - - case ICMP_UNREACH_HOST_PRECEDENCE: -@@ -867,6 +932,23 @@ - Printf(" !C"); - break; - -+ case ICMP_UNREACH_NET_UNKNOWN: -+ case ICMP_UNREACH_HOST_UNKNOWN: -+ ++unreachable; -+ Printf(" !U"); -+ break; -+ -+ case ICMP_UNREACH_ISOLATED: -+ ++unreachable; -+ Printf(" !I"); -+ break; -+ -+ case ICMP_UNREACH_TOSNET: -+ case ICMP_UNREACH_TOSHOST: -+ ++unreachable; -+ Printf(" !T"); -+ break; -+ - default: - ++unreachable; - Printf(" !<%d>", code); -@@ -894,7 +976,7 @@ - struct timeval now, wait; - struct timezone tz; - register int cc = 0; -- int fromlen = sizeof(*fromp); -+ socklen_t fromlen = sizeof(*fromp); - - FD_ZERO(&fds); - FD_SET(sock, &fds); -@@ -938,7 +1020,7 @@ - /* Payload */ - outdata->seq = seq; - outdata->ttl = ttl; -- outdata->tv = *tp; -+ memcpy(&outdata->tv, tp, sizeof(outdata->tv)); - - if (useicmp) - outicmp->icmp_seq = htons(seq); -@@ -1003,12 +1085,13 @@ - - #ifdef __hpux - cc = sendto(sndsock, useicmp ? (char *)outicmp : (char *)outudp, -- packlen - (sizeof(*outip) + optlen), 0, &whereto, sizeof(whereto)); -+ packlen - (sizeof(*outip) + optlen), 0, -+ (struct sockaddr *)&whereto, sizeof(whereto)); - if (cc > 0) - cc += sizeof(*outip) + optlen; - #else - cc = sendto(sndsock, (char *)outip, -- packlen, 0, &whereto, sizeof(whereto)); -+ packlen, 0, (struct sockaddr *)&whereto, sizeof(whereto)); - #endif - if (cc < 0 || cc != packlen) { - if (cc < 0) -@@ -1039,12 +1122,12 @@ - static char *ttab[] = { - "Echo Reply", "ICMP 1", "ICMP 2", "Dest Unreachable", - "Source Quench", "Redirect", "ICMP 6", "ICMP 7", -- "Echo", "ICMP 9", "ICMP 10", "Time Exceeded", -+ "Echo", "Router Advert", "Router Solicit", "Time Exceeded", - "Param Problem", "Timestamp", "Timestamp Reply", "Info Request", -- "Info Reply" -+ "Info Reply", "Mask Request", "Mask Reply" - }; - -- if (t > 16) -+ if (t > 18) - return("OUT-OF-RANGE"); - - return(ttab[t]); -@@ -1272,6 +1355,11 @@ - addr = inet_addr(hostname); - if ((int32_t)addr != -1) { - hi->name = strdup(hostname); -+ if (hi->name == NULL) { -+ Fprintf(stderr, "%s: strdup %s\n", -+ prog, strerror(errno)); -+ exit(1); -+ } - hi->n = 1; - hi->addrs = calloc(1, sizeof(hi->addrs[0])); - if (hi->addrs == NULL) { -@@ -1293,6 +1381,11 @@ - exit(1); - } - hi->name = strdup(hp->h_name); -+ if (hi->name == NULL) { -+ Fprintf(stderr, "%s: strdup %s\n", -+ prog, strerror(errno)); -+ exit(1); -+ } - for (n = 0, p = hp->h_addr_list; *p != NULL; ++n, ++p) - continue; - hi->n = n; -@@ -1381,8 +1474,96 @@ - - Fprintf(stderr, "Version %s\n", version); - Fprintf(stderr, -- "Usage: %s [-dFInrvx] [-g gateway] [-i iface] [-f first_ttl]\n" -+ "Usage: %s [-dFIlnrvx] [-g gateway] [-i iface] [-f first_ttl]\n" - "\t[-m max_ttl] [ -p port] [-q nqueries] [-s src_addr] [-t tos]\n" - "\t[-w waittime] [-z pausemsecs] host [packetlen]\n", prog); - exit(1); - } -+ -+ -+#ifdef USE_KERNEL_ROUTING_TABLE -+ -+/* This function currently only supports IPv4. Someone who knows -+ * more about multi-protocol socket stuff should take a look at this. -+ * -+ * (But does it make any sense for traceroute to support other -+ * protocols? Maybe IPv6... -+ */ -+ -+struct ifaddrlist *search_routing_table(struct sockaddr_in *to, struct ifaddrlist *al, int n) -+{ -+ struct ifaddrlist *first_if; -+ FILE *fp; -+ char buf[1024]; -+ char ifname[128]; -+ unsigned int route_dest; -+ unsigned int mask; -+ char best_name[128]; -+ unsigned int best_mask; -+ unsigned int dest_addr; -+ unsigned int convs; -+ -+ /* How come using ntohl(to->sin_addr.s_addr) doesn't work here? */ -+ dest_addr = to->sin_addr.s_addr; -+ -+ fp = fopen("/proc/net/route", "r"); -+ if (fp == NULL) { -+ return al; -+ } -+ -+ /* Skip the first line (the column headings) */ -+ if (fgets(buf, sizeof(buf), fp) == NULL) { -+ fclose(fp); -+ return al; -+ } -+ -+ best_name[0] = '\0'; -+ best_mask = 0; -+ -+ while (fgets(buf, sizeof(buf), fp) != NULL) { -+ /* Field 1: interface name -+ * Field 2: dest addr -+ * Field 8: genmask -+ */ -+ convs = sscanf(buf, "%127s %x %*s %*s %*s %*s %*s %x", -+ ifname, &route_dest, &mask); -+ if (convs != 3) { -+ /* format error .... */ -+ fclose(fp); -+ return al; -+ } -+ -+ if ((dest_addr & mask) == route_dest) { -+ /* This routing entry applies to -+ * our destination addr -+ */ -+ if ((mask > best_mask) || (best_mask == 0)) { -+ /* And it is more specific than any -+ * previous match (or is the first match) -+ */ -+ best_mask = mask; -+ strncpy(best_name, ifname, -+ sizeof(best_name) - 1); -+ best_name[sizeof(best_name) - 1] = 0; -+ } -+ } -+ } -+ -+ fclose(fp); -+ -+ /* If we don't find a match, we'll return the first entry */ -+ first_if = al; -+ -+ while (al < first_if + n) { -+ if (strcmp(best_name, al->device) == 0) { -+ /* Got a match */ -+ return al; -+ } -+ al++; -+ } -+ -+ return first_if; -+} -+ -+#endif -+ ---- traceroute-1.4a12.orig/debian/changelog -+++ traceroute-1.4a12/debian/changelog -@@ -0,0 +1,63 @@ -+traceroute (1.4a12-5) unstable; urgency=low -+ -+ * Restrict the -s option to the super-user. -+ * Updated documentation for the -s option (closes: #105362). -+ -+ -- Herbert Xu <herbert@debian.org> Mon, 16 Jul 2001 19:28:45 +1000 -+ -+traceroute (1.4a12-4) unstable; urgency=low -+ -+ * Updated aclocal.m4 for autoconf 2.50 (closes: #98367). -+ -+ -- Herbert Xu <herbert@debian.org> Wed, 23 May 2001 18:48:59 +1000 -+ -+traceroute (1.4a12-3) unstable; urgency=low -+ -+ * Drop privileges earlier. -+ * Applied "paranoia" patch from Richard Kettlewell (closes: #85619). -+ - eliminate unbounded sprintf calls -+ - eliminate unbounded sscanf calls -+ - strncpy final-null paranoia -+ * Set HAVE_RAW_OPTIONS (closes: #78475). -+ * Added missing option to usage (Neale Banks, closes: #88892). -+ -+ -- Herbert Xu <herbert@debian.org> Fri, 9 Mar 2001 22:24:11 +1100 -+ -+traceroute (1.4a12-2) unstable; urgency=low -+ -+ * Made changes for dpkg-statoverride (closes: #83817). -+ -+ -- Herbert Xu <herbert@debian.org> Sun, 28 Jan 2001 21:49:35 +1100 -+ -+traceroute (1.4a12-1) unstable; urgency=low -+ -+ * New upstream release (closes: #79920, #81395). -+ * Use struct sockaddr_stroage (closes: #79348). -+ -+ -- Herbert Xu <herbert@debian.org> Fri, 26 Jan 2001 20:57:21 +1100 -+ -+traceroute (1.4a8-1) unstable; urgency=low -+ -+ * New upstream release. -+ -+ -- Herbert Xu <herbert@debian.org> Sat, 9 Dec 2000 14:18:00 +1100 -+ -+traceroute (1.4a5-3) stable unstable; urgency=low -+ -+ * Fixed a bug where free(3) was called on non-malloced memory. -+ -+ -- Herbert Xu <herbert@debian.org> Thu, 24 Aug 2000 20:44:51 +1000 -+ -+traceroute (1.4a5-2) frozen unstable; urgency=low -+ -+ * Use config.* from automake, needed for building traceroute on ARM -+ (closes: #61267). -+ -+ -- Herbert Xu <herbert@debian.org> Fri, 31 Mar 2000 07:50:33 +1000 -+ -+traceroute (1.4a5-1) unstable; urgency=low -+ -+ * Initial release (closes: #34166). -+ -+ -- Herbert Xu <herbert@debian.org> Mon, 1 Nov 1999 15:11:06 +1100 -+ ---- traceroute-1.4a12.orig/debian/control -+++ traceroute-1.4a12/debian/control -@@ -0,0 +1,22 @@ -+Source: traceroute -+Section: net -+Priority: optional -+Maintainer: Herbert Xu <herbert@debian.org> -+Standards-Version: 3.5.5 -+Build-Depends: automake, autoconf, debhelper -+ -+Package: traceroute -+Architecture: any -+Depends: ${shlibs:Depends} -+Conflicts: suidmanager (<< 0.50) -+Replaces: netstd -+Description: Traces the route taken by packets over a TCP/IP network. -+ The traceroute utility displays the route used by IP packets on their way to a -+ specified network (or Internet) host. Traceroute displays the IP number and -+ host name (if possible) of the machines along the route taken by the packets. -+ Traceroute is used as a network debugging tool. If you're having network -+ connectivity problems, traceroute will show you where the trouble is coming -+ from along the route. -+ . -+ Install traceroute if you need a tool for diagnosing network connectivity -+ problems. ---- traceroute-1.4a12.orig/debian/copyright -+++ traceroute-1.4a12/debian/copyright -@@ -0,0 +1,16 @@ -+This package was split from netstd by Herbert Xu herbert@debian.org on -+Mon, 1 Nov 1999 15:14:03 +1100. -+ -+netstd was created by Peter Tobias tobias@et-inf.fho-emden.de on -+Wed, 20 Jul 1994 17:23:21 +0200. -+ -+It was downloaded from ftp://ftp.ee.lbl.gov/. -+ -+Copyright: -+ -+Copyright (c) 1988, 1989, 1991, 1994, 1995, 1996, 1997 -+The Regents of the University of California. All rights reserved. -+ -+The license can be found in /usr/share/common-licenses/BSD. -+ -+$Id: copyright,v 1.1 1999/11/01 04:34:49 herbert Exp $ ---- traceroute-1.4a12.orig/debian/rules -+++ traceroute-1.4a12/debian/rules -@@ -0,0 +1,96 @@ -+#!/usr/bin/make -f -+# GNU copyright 1997 to 1999 by Joey Hess. -+# Copyright (c) 1999 Herbert Xu <herbert@debian.org> -+ -+# Uncomment this to turn on verbose mode. -+#export DH_VERBOSE=1 -+ -+# This is the debhelper compatability version to use. -+export DH_COMPAT=2 -+ -+build: build-stamp -+build-stamp: -+ dh_testdir -+ -+ if [ ! -f configure.old ]; then \ -+ mv configure configure.old; \ -+ mv config.guess config.guess.old; \ -+ mv config.sub config.sub.old; \ -+ mv linux-include/netinet/in_systm.h linux-include; \ -+ mv linux-include/netinet/ip.h linux-include; \ -+ mv linux-include/netinet/ip_icmp.h linux-include; \ -+ cp /usr/share/automake/config.guess .; \ -+ cp /usr/share/automake/config.sub .; \ -+ autoconf; \ -+ fi -+ if [ ! -f Makefile ]; then ./configure; fi -+ $(MAKE) CCOPT="-g -O2" -+ -+ touch build-stamp -+ -+clean: -+ dh_testdir -+ dh_testroot -+ rm -f build-stamp install-stamp -+ -+ -$(MAKE) distclean -+ if [ -f configure.old ]; then \ -+ mv configure.old configure; \ -+ mv config.guess.old config.guess; \ -+ mv config.sub.old config.sub; \ -+ mv linux-include/in_systm.h linux-include/netinet; \ -+ mv linux-include/ip.h linux-include/netinet; \ -+ mv linux-include/ip_icmp.h linux-include/netinet; \ -+ fi -+ -+ dh_clean -+ -+install: build install-stamp -+install-stamp: -+ dh_testdir -+ dh_testroot -+ dh_clean -k -+ dh_installdirs -+ -+ install traceroute debian/traceroute/usr/sbin -+ cp traceroute.8 debian/traceroute/usr/share/man/man8 -+ -+ touch install-stamp -+ -+# Build architecture-independent files here. -+binary-indep: build install -+# We have nothing to do by default. -+ -+# Build architecture-dependent files here. -+binary-arch: build install -+# dh_testversion -+ dh_testdir -+ dh_testroot -+# dh_installdebconf -+ dh_installdocs -+ dh_installexamples -+ dh_installmenu -+# dh_installemacsen -+# dh_installpam -+# dh_installinit -+ dh_installcron -+ dh_installmanpages -+ dh_installinfo -+# dh_undocumented -+ dh_installchangelogs CHANGES -+ dh_link -+ dh_strip -+ dh_compress -+ dh_fixperms -+ # You may want to make some executables suid here. -+ chmod u+s debian/traceroute/usr/sbin/traceroute -+# dh_makeshlibs -+ dh_installdeb -+# dh_perl -+ dh_shlibdeps -+ dh_gencontrol -+ dh_md5sums -+ dh_builddeb -+ -+binary: binary-indep binary-arch -+.PHONY: build clean binary-indep binary-arch binary install ---- traceroute-1.4a12.orig/debian/traceroute.dirs -+++ traceroute-1.4a12/debian/traceroute.dirs -@@ -0,0 +1,2 @@ -+usr/sbin -+usr/share/man/man8 ---- traceroute-1.4a12.orig/debian/traceroute.docs -+++ traceroute-1.4a12/debian/traceroute.docs -@@ -0,0 +1 @@ -+README ---- traceroute-1.4a12.orig/debian/traceroute.examples -+++ traceroute-1.4a12/debian/traceroute.examples -@@ -0,0 +1,2 @@ -+mean.awk -+median.awk diff --git a/source/n/vsftpd/vsftpd.SlackBuild b/source/n/vsftpd/vsftpd.SlackBuild index c202e392d..06b56763d 100755 --- a/source/n/vsftpd/vsftpd.SlackBuild +++ b/source/n/vsftpd/vsftpd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.1.2 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo vsftpd-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -49,16 +59,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# This allows the libfinder script to find stuff in */lib64 -if [ "$LIBDIRSUFFIX" = "64" ]; then - zcat $CWD/vsftpd.vsf_findlibs.sh.diff.gz | patch -p1 --verbose || exit 1 -fi - zcat $CWD/vsftpd.builddefs.diff.gz | patch -p1 --verbose || exit 1 zcat $CWD/vsftpd.conf.diff.gz | patch -p1 --verbose || exit 1 -sed -i -e "s#lib/#lib${LIBDIRSUFFIX}/#g" vsf_findlibs.sh - make $NUMJOBS || make || exit 1 mkdir -p $PKG/usr/sbin @@ -81,10 +84,18 @@ mkdir -p $PKG/home/ftp mkdir -p $PKG/usr/doc/vsftpd-$VERSION cp -a \ - AUDIT BENCHMARKS BUGS COPYING* COPYRIGHT Changelog EXAMPLE FAQ \ + AUDIT BENCHMARKS BUGS COPYING* COPYRIGHT EXAMPLE FAQ \ INSTALL LICENSE README* REFS REWARD SECURITY SIZE SPEED TODO TUNING \ $PKG/usr/doc/vsftpd-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r Changelog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat Changelog | head -n 1000 > $DOCSDIR/Changelog + touch -r Changelog $DOCSDIR/Changelog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/n/vsftpd/vsftpd.conf.diff b/source/n/vsftpd/vsftpd.conf.diff index 230d858c8..1f410a7ac 100644 --- a/source/n/vsftpd/vsftpd.conf.diff +++ b/source/n/vsftpd/vsftpd.conf.diff @@ -1,5 +1,6 @@ ---- ./vsftpd.conf.orig 2008-12-17 14:31:40.000000000 -0600 -+++ ./vsftpd.conf 2009-03-29 22:09:21.000000000 -0500 +diff -Nur vsftpd-2.2.1.orig/vsftpd.conf vsftpd-2.2.1/vsftpd.conf +--- vsftpd-2.2.1.orig/vsftpd.conf 2009-10-18 21:04:23.000000000 -0500 ++++ vsftpd-2.2.1/vsftpd.conf 2009-10-19 10:22:16.609407947 -0500 @@ -19,7 +19,7 @@ # # Default umask for local users is 077. You may wish to change this to 022, @@ -23,7 +24,7 @@ # # You may change the default value for timing out an idle session. #idle_session_timeout=600 -@@ -100,14 +100,17 @@ +@@ -101,12 +101,13 @@ # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. @@ -36,13 +37,9 @@ -listen=YES +# When "listen" directive is enabled, vsftpd runs in standalone mode (rather +# than from inetd) and listens on IPv4 sockets. To use vsftpd in standalone -+# mode rather than with inetd, either change the line below to 'listen=YES' -+# or comment it out. This directive cannot be used in conjunction with the -+# listen_ipv6 directive. ++# mode rather than with inetd, change the line below to 'listen=YES' ++# This directive cannot be used in conjunction with the listen_ipv6 directive. +listen=NO # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 - # sockets, you must run two copies of vsftpd whith two configuration files. - # Make sure, that one of the listen options is commented !! - #listen_ipv6=YES -+ + # sockets, you must run two copies of vsftpd with two configuration files. diff --git a/source/n/vsftpd/vsftpd.vsf_findlibs.sh.diff b/source/n/vsftpd/vsftpd.vsf_findlibs.sh.diff deleted file mode 100644 index 147ee7426..000000000 --- a/source/n/vsftpd/vsftpd.vsf_findlibs.sh.diff +++ /dev/null @@ -1,87 +0,0 @@ -diff -Nur vsftpd-2.1.2.orig/vsf_findlibs.sh vsftpd-2.1.2/vsf_findlibs.sh ---- vsftpd-2.1.2.orig/vsf_findlibs.sh 2009-05-21 15:43:11.000000000 -0500 -+++ vsftpd-2.1.2/vsf_findlibs.sh 2009-05-31 00:41:38.308704816 -0500 -@@ -6,61 +6,61 @@ - - if find_func hosts_access tcpwrap.o; then - echo "-lwrap"; -- locate_library /lib/libnsl.so && echo "-lnsl"; -+ locate_library /lib64/libnsl.so && echo "-lnsl"; - fi - - # Look for PAM (done weirdly due to distribution bugs (e.g. Debian) or the - # crypt library. - if find_func pam_start sysdeputil.o; then -- locate_library /lib/libpam.so.0 && echo "/lib/libpam.so.0"; -- locate_library /usr/lib/libpam.so && echo "-lpam"; -+ locate_library /lib64/libpam.so.0 && echo "/lib64/libpam.so.0"; -+ locate_library /usr/lib64/libpam.so && echo "-lpam"; - # HP-UX ends shared libraries with .sl -- locate_library /usr/lib/libpam.sl && echo "-lpam"; -+ locate_library /usr/lib64/libpam.sl && echo "-lpam"; - # AIX ends shared libraries with .a -- locate_library /usr/lib/libpam.a && echo "-lpam"; -+ locate_library /usr/lib64/libpam.a && echo "-lpam"; - else -- locate_library /lib/libcrypt.so && echo "-lcrypt"; -- locate_library /usr/lib/libcrypt.so && echo "-lcrypt"; -+ locate_library /lib64/libcrypt.so && echo "-lcrypt"; -+ locate_library /usr/lib64/libcrypt.so && echo "-lcrypt"; - fi - - # Look for the dynamic linker library. Needed by older RedHat when - # you link in PAM --locate_library /lib/libdl.so && echo "-ldl"; -+locate_library /lib64/libdl.so && echo "-ldl"; - - # Look for libsocket. Solaris needs this. --locate_library /lib/libsocket.so && echo "-lsocket"; -+locate_library /lib64/libsocket.so && echo "-lsocket"; - - # Look for libnsl. Solaris needs this. --locate_library /lib/libnsl.so && echo "-lnsl"; -+locate_library /lib64/libnsl.so && echo "-lnsl"; - - # Look for libresolv. Solaris needs this. --locate_library /lib/libresolv.so && echo "-lresolv"; -+locate_library /lib64/libresolv.so && echo "-lresolv"; - - # Look for libutil. Older FreeBSD need this for setproctitle(). --locate_library /usr/lib/libutil.so && echo "-lutil"; -+locate_library /usr/lib64/libutil.so && echo "-lutil"; - - # For older HP-UX... --locate_library /usr/lib/libsec.sl && echo "-lsec"; -+locate_library /usr/lib64/libsec.sl && echo "-lsec"; - - # Look for libcap (capabilities) --if locate_library /lib/libcap.so.1; then -- echo "/lib/libcap.so.1"; --elif locate_library /lib/libcap.so.2; then -- echo "/lib/libcap.so.2"; -+if locate_library /lib64/libcap.so.1; then -+ echo "/lib64/libcap.so.1"; -+elif locate_library /lib64/libcap.so.2; then -+ echo "/lib64/libcap.so.2"; - else -- locate_library /usr/lib/libcap.so && echo "-lcap"; -- locate_library /lib/libcap.so && echo "-lcap"; -+ locate_library /usr/lib64/libcap.so && echo "-lcap"; -+ locate_library /lib64/libcap.so && echo "-lcap"; - fi - - # Solaris needs this for nanosleep().. --locate_library /lib/libposix4.so && echo "-lposix4"; --locate_library /usr/lib/libposix4.so && echo "-lposix4"; -+locate_library /lib64/libposix4.so && echo "-lposix4"; -+locate_library /usr/lib64/libposix4.so && echo "-lposix4"; - - # Tru64 (nanosleep) - locate_library /usr/shlib/librt.so && echo "-lrt"; - - # Solaris sendfile --locate_library /usr/lib/libsendfile.so && echo "-lsendfile"; -+locate_library /usr/lib64/libsendfile.so && echo "-lsendfile"; - - # OpenSSL - if find_func SSL_library_init ssl.o; then diff --git a/source/n/wget/wget.SlackBuild b/source/n/wget/wget.SlackBuild index 23fbe7342..e79de18cc 100755 --- a/source/n/wget/wget.SlackBuild +++ b/source/n/wget/wget.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,17 +21,31 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.11.4 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo wget-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} -if [ "$ARCH" = "i486" ]; then +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mtune=i686" +elif [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -76,6 +90,14 @@ cp -a \ AUTHORS COPYING* MAILING-LIST NEWS PATCHES README* TODO \ $PKG/usr/doc/wget-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/n/whois/whois.SlackBuild b/source/n/whois/whois.SlackBuild index 26baacf8c..589b57dbd 100755 --- a/source/n/whois/whois.SlackBuild +++ b/source/n/whois/whois.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.7.26 -ARCH=${ARCH:-x86_64} +PKGNAM=whois +VERSION=${VERSION:-$(echo ${PKGNAM}_*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d _ | rev)} BUILD=${BUILD:-1} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-whois @@ -42,27 +51,17 @@ find . \ -exec chmod 644 {} \; make || exit +make install install-pos BASEDIR=$PKG || exit 1 -mkdir -p $PKG/usr/bin -cat whois > $PKG/usr/bin/whois -chmod 755 $PKG/usr/bin/whois - -( cd po - make - for n in *.mo ; do \ - l=`basename $n .mo`; \ - /usr/bin/install -c -m 755 -d $PKG/usr/share/locale/$l; \ - /usr/bin/install -c -m 755 -d $PKG/usr/share/locale/$l/LC_MESSAGES; \ - /usr/bin/install -c -m 644 $n $PKG/usr/share/locale/$l/LC_MESSAGES/whois.mo; \ - done -) +mv $PKG/usr/share/man $PKG/usr +gzip -9 $PKG/usr/man/man1/*.1 -mkdir -p $PKG/usr/man/man1 -cat whois.1 | gzip -9c > $PKG/usr/man/man1/whois.1.gz +# Remove mkpasswd stuff: +find $PKG -iname "mkpasswd*" -exec rm -f {} \; mkdir -p $PKG/usr/doc/whois-$VERSION cp -a \ - COPYING* README \ + COPYING README \ $PKG/usr/doc/whois-$VERSION find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ diff --git a/source/n/wireless-tools/scripts/rc.wireless b/source/n/wireless-tools/scripts/rc.wireless index baa148dc7..5d5c4be5b 100644 --- a/source/n/wireless-tools/scripts/rc.wireless +++ b/source/n/wireless-tools/scripts/rc.wireless @@ -48,6 +48,11 @@ # 23/apr/2008 * Pat Volkerding * Increase sleep time after bringing up an # interface to 3 seconds. Some drivers # need this additional time to initalize. +# 02/jan/2010 * Pat Volkerding * Look for /sys/class/net/$NETDEV/wireless rather +# than the contents of /proc/net/wireless to find +# if a network device is wireless. In newer +# kernels devices will not show up in +# /proc/net/wireless until active. # ------------------------------------------------------------------------------ LOGGER=${LOGGER:-cat} @@ -82,7 +87,7 @@ is_wireless_device () #LC_ALL=C $IWPATH/iwconfig $1 2>&1 | \ # grep -Eiq "no wireless extensions|no such device" || return 0 #return 1 - if ! grep `echo ${1}: | cut -f 1 -d :`: /proc/net/wireless 1> /dev/null ; then + if [ ! -d /sys/class/net/${1}/wireless ]; then # no wireless interface return 1 else diff --git a/source/n/wireless-tools/wireless_tools.SlackBuild b/source/n/wireless-tools/wireless_tools.SlackBuild index 049fb47e0..2e78f0f9c 100755 --- a/source/n/wireless-tools/wireless_tools.SlackBuild +++ b/source/n/wireless-tools/wireless_tools.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,17 @@ VERSION=29 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-5} - +BUILD=${BUILD:-6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" diff --git a/source/n/wpa_supplicant/wpa_supplicant.SlackBuild b/source/n/wpa_supplicant/wpa_supplicant.SlackBuild index a38fed35b..b3acc5834 100755 --- a/source/n/wpa_supplicant/wpa_supplicant.SlackBuild +++ b/source/n/wpa_supplicant/wpa_supplicant.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2004-2008 Eric Hameleers, Eindhoven, NL -# Copyright 2008-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008-2010 Patrick J. Volkerding, Sebeka, MN, USA # Permission to use, copy, modify, and distribute this software for # any purpose with or without fee is hereby granted, provided that # the above copyright notice and this permission notice appear in all @@ -21,10 +21,19 @@ # SUCH DAMAGE. # ----------------------------------------------------------------------------- -PRGNAM=wpa_supplicant -VERSION=${VERSION:-0.6.9} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=wpa_supplicant +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -45,6 +54,9 @@ elif [ "$ARCH" = "arm" ]; then elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi # Support for some of the wireless drivers needs the header files of those @@ -59,19 +71,19 @@ BROADCOM_INCLUDES="" CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG -if ! [ -f $CWD/${PRGNAM}.defconfig ]; then - echo "Could not find ${PRGNAM}.defconfig!" +if ! [ -f $CWD/${PKGNAM}.defconfig ]; then + echo "Could not find ${PKGNAM}.defconfig!" exit 1 fi cd $TMP -rm -rf ${PRGNAM}-${VERSION} -tar -xvf $CWD/${PRGNAM}-${VERSION}.tar.bz2 || exit 1 -cd ${PRGNAM}-${VERSION} +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-${VERSION}.tar.?z* || exit 1 +cd ${PKGNAM}-${VERSION} chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -87,7 +99,7 @@ find . \ cd wpa_supplicant # Create the configuration file for building wpa_supplicant: -cat $CWD/${PRGNAM}.defconfig > .config +cat $CWD/${PKGNAM}.defconfig > .config if [ ! -z $MADWIFI_INCLUDES -a -d $MADWIFI_INCLUDES ]; then echo "Adding madwifi driver (Atheros) support" cat <<-EOT >> .config @@ -162,7 +174,7 @@ done # Install a default configuration file: mkdir -p $PKG/etc cat <<-_EOT_ > $PKG/etc/wpa_supplicant.conf.new - # See /usr/doc/${PRGNAM}-${VERSION}/wpa_supplicant.conf.sample + # See /usr/doc/${PKGNAM}-${VERSION}/wpa_supplicant.conf.sample # for many more options that you can use in this file. # This line enables the use of wpa_cli which is used by rc.wireless @@ -219,11 +231,11 @@ config etc/dbus-1/system.d/dbus-wpa_supplicant.conf.new EOINS # Add the documentation: -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION -cp -a $CWD/README.slackware $PKG/usr/doc/${PRGNAM}-${VERSION}/ -chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/* -chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION/* +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a $DOCS $PKG/usr/doc/$PKGNAM-$VERSION +cp -a $CWD/README.slackware $PKG/usr/doc/${PKGNAM}-${VERSION}/ +chmod -R a-w $PKG/usr/doc/$PKGNAM-$VERSION/* +chown -R root:root $PKG/usr/doc/$PKGNAM-$VERSION/* # This should only be read/write by root: chmod 600 $PKG/etc/wpa_supplicant.conf.new @@ -244,5 +256,5 @@ fi # Build the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz diff --git a/source/n/yptools/yp-tools-2.12.tar.bz2.sign b/source/n/yptools/yp-tools-2.12.tar.bz2.sign new file mode 100644 index 000000000..a06fde67a --- /dev/null +++ b/source/n/yptools/yp-tools-2.12.tar.bz2.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLzsykyGugalF9Dw4RAtmgAJ4sG0TJzmNkAz7Z+JJFfOjvGlbTGACgir1a ++uaNv6XQNH7Vu+Saqy/OsL8= +=EcSX +-----END PGP SIGNATURE----- diff --git a/source/n/yptools/yp-tools-2.9.tar.bz2.sign b/source/n/yptools/yp-tools-2.9.tar.bz2.sign deleted file mode 100644 index 2eaf4b97d..000000000 --- a/source/n/yptools/yp-tools-2.9.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.2.1 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQBA1tX5yGugalF9Dw4RApxKAJ4wnAJLtV+fLyqydt6C7/jlHI0S+ACeN8d9 -z4e9NxBySBZBdFi8xwGxHTo= -=JakC ------END PGP SIGNATURE----- diff --git a/source/n/yptools/ypbind-mt-1.19.1.tar.bz2.sign b/source/n/yptools/ypbind-mt-1.19.1.tar.bz2.sign deleted file mode 100644 index 183edfaed..000000000 --- a/source/n/yptools/ypbind-mt-1.19.1.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.2.6 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQBCyRFDyGugalF9Dw4RAlOUAJ4kDj2kmYi2cVZqf0dLBlwexfqWhwCfTORG -5qMKKLSrKQ8Mx/1l/ffOmDk= -=zaLU ------END PGP SIGNATURE----- diff --git a/source/n/yptools/ypbind-mt-1.31.tar.bz2.sign b/source/n/yptools/ypbind-mt-1.31.tar.bz2.sign new file mode 100644 index 000000000..1e40e59de --- /dev/null +++ b/source/n/yptools/ypbind-mt-1.31.tar.bz2.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD4DBQBLE+GAyGugalF9Dw4RAtllAJdwcdicAyMwnl/BtkHP+DnYseD9AJ4vS2ly +HHNnyMFZ2A0tun7/Lt7Psw== +=ob7L +-----END PGP SIGNATURE----- diff --git a/source/n/yptools/ypserv-2.18.tar.bz2.sign b/source/n/yptools/ypserv-2.18.tar.bz2.sign deleted file mode 100644 index 017a6d21c..000000000 --- a/source/n/yptools/ypserv-2.18.tar.bz2.sign +++ /dev/null @@ -1,8 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v1.2.6 (GNU/Linux) -Comment: See http://www.kernel.org/signature.html for info - -iD8DBQBC3lhmyGugalF9Dw4RArUaAJwP88PBcrq6A8W7600Aa1MOIeySugCfW02y -jYf0vlXo93Vs13VQWcCzzo0= -=ZIYE ------END PGP SIGNATURE----- diff --git a/source/n/yptools/ypserv-2.23.tar.bz2.sign b/source/n/yptools/ypserv-2.23.tar.bz2.sign new file mode 100644 index 000000000..9687e760a --- /dev/null +++ b/source/n/yptools/ypserv-2.23.tar.bz2.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLg+CRyGugalF9Dw4RAlGVAJ0Sokt5e5bQg6J8Hq4zUyrTY8g2kQCfaNyD +sBJmO9Igqzku/yLWqtU2WKw= +=dTwr +-----END PGP SIGNATURE----- diff --git a/source/n/yptools/yptools.SlackBuild b/source/n/yptools/yptools.SlackBuild index 96f217245..3c98a8e3a 100755 --- a/source/n/yptools/yptools.SlackBuild +++ b/source/n/yptools/yptools.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,14 +22,23 @@ # Package version number: -VERSION=2.9 -ARCH=${ARCH:-x86_64} +VERSION=2.12 BUILD=${BUILD:-1} YPTOOLS=$VERSION -YPBINDMT=1.19.1 +YPBINDMT=1.31 #YPMAKE=0.11 -YPSERV=2.18 +YPSERV=2.23 + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -40,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) diff --git a/source/t/tetex/tetex.SlackBuild b/source/t/tetex/tetex.SlackBuild index f19273323..e813490d0 100755 --- a/source/t/tetex/tetex.SlackBuild +++ b/source/t/tetex/tetex.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,19 @@ VERSION=3.0 -ARCH=${ARCH:-x86_64} +BUILD=${BUILD:-8} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-6} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -35,6 +45,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi # There were so many local security problems with this shared fontcache @@ -58,6 +70,8 @@ mkdir -p /usr/share/texmf tar xvf $CWD/tetex-texmf-$VERSION.tar.xz chown -R root:root . find . -type f -perm 666 -exec chmod 644 {} \; + # Change the sell-by date: + zcat $CWD/tetex.leet.diff.gz | patch -p1 --verbose || exit 1 ) cd $TMP rm -rf tetex-src-$VERSION @@ -91,6 +105,16 @@ zcat $CWD/tetex.amstex.fmtutil.diff.gz | patch -p1 --verbose || exit 1 # Don't leave texconfig junk in $TMP: zcat $CWD/tetex.tmp.cleanup.diff.gz | patch -p1 --verbose || exit 1 +# Fix the cpascal header so there's no conflict with getline() in the +# generated C code: +zcat $CWD/tetex.cpascal.getline.posix.2008.diff.gz | patch -p1 --verbose || exit 1 + +# Patch for libpng-1.4.0: +zcat $CWD/tetex.png14.diff.gz | patch -p1 --verbose || exit 1 + +# Another problem caused by getline() in glibc: +zcat $CWD/tetex.afm2tfm.getline.diff.gz | patch -p1 --verbose || exit 1 + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure --prefix=/usr/share/texmf \ diff --git a/source/t/tetex/tetex.afm2tfm.getline.diff b/source/t/tetex/tetex.afm2tfm.getline.diff new file mode 100644 index 000000000..8406aa891 --- /dev/null +++ b/source/t/tetex/tetex.afm2tfm.getline.diff @@ -0,0 +1,38 @@ +--- ./texk/dvipsk/afm2tfm.c.orig 2005-01-30 07:17:09.000000000 -0600 ++++ ./texk/dvipsk/afm2tfm.c 2010-02-19 11:56:12.000000000 -0600 +@@ -257,7 +257,7 @@ + } + + int +-getline P1H(void) { ++afm_int_getline P1H(void) { + register char *p ; + register int c ; + +@@ -606,7 +606,7 @@ + ai = newchar() ; + ai->adobenum = -1 ; + ai->adobename = "||" ; /* boundary character name */ +- while (getline()) { ++ while (afm_int_getline()) { + switch(interest(paramstring())) { + case FontName: + fontname = paramnewstring() ; +@@ -1882,7 +1882,7 @@ + + while (1) { + while (param == 0 || *param == 0) { +- if (getline() == 0) ++ if (afm_int_getline() == 0) + error("! premature end in encoding file") ; + for (p=buffer; *p; p++) + if (*p == '%') { +@@ -1973,7 +1973,7 @@ + p = gettoken() ; + if (strcmp(p, "]")) + error("! token 258 in encoding must be make-array (])") ; +- while (getline()) { ++ while (afm_int_getline()) { + for (p=buffer; *p; p++) + if (*p == '%') { + if (ignoreligkern == 0) diff --git a/source/t/tetex/tetex.cpascal.getline.posix.2008.diff b/source/t/tetex/tetex.cpascal.getline.posix.2008.diff new file mode 100644 index 000000000..879adc441 --- /dev/null +++ b/source/t/tetex/tetex.cpascal.getline.posix.2008.diff @@ -0,0 +1,17 @@ +--- ./texk/web2c/cpascal.h.orig 2004-08-28 15:49:59.000000000 -0500 ++++ ./texk/web2c/cpascal.h 2010-02-19 11:27:04.000000000 -0600 +@@ -241,6 +241,14 @@ + #define getname vms_getname + #endif + ++/* Apparently POSIX 2008 has getline and glibc 2.9.90 exports it. ++ tangle, weave, et al. use that symbol; try to define it away so ++ something that a standard won't usurp. */ ++#ifdef getline ++#undef getline ++#endif ++#define getline web2c_getline ++ + /* Declarations for the routines we provide ourselves in lib/. */ + + extern string basenamechangesuffix P3H(const_string,const_string,const_string); diff --git a/source/t/tetex/tetex.leet.diff b/source/t/tetex/tetex.leet.diff new file mode 100644 index 000000000..fe251893b --- /dev/null +++ b/source/t/tetex/tetex.leet.diff @@ -0,0 +1,25 @@ +--- ./tex/latex/base/latex.ltx.orig 2004-03-13 20:19:52.000000000 -0600 ++++ ./tex/latex/base/latex.ltx 2010-05-17 12:59:23.000000000 -0500 +@@ -525,11 +525,11 @@ + \advance\count@\month + \advance\count@-#2\relax} + \expandafter\reserved@a\fmtversion\@nil +-\ifnum\count@>65 ++\ifnum\count@>16044 + \typeout{^^J% + !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!^^J% + ! You are attempting to make a LaTeX format from a source file^^J% +-! That is more than five years old.^^J% ++! That is more than 1337 years old.^^J% + !^^J% + ! If you enter <return> to scroll past this message then the format^^J% + ! will be built, but please consider obtaining newer source files^^J% +@@ -537,7 +537,7 @@ + !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!^^J% + } + \errhelp{To avoid this error message, obtain new LaTeX sources.} +- \errmessage{LaTeX source files more than 5 years old!} ++ \errmessage{LaTeX source files more than 1337 years old!} + \fi + \let\reserved@a\relax + \fi diff --git a/source/t/tetex/tetex.png14.diff b/source/t/tetex/tetex.png14.diff new file mode 100644 index 000000000..4f6548ace --- /dev/null +++ b/source/t/tetex/tetex.png14.diff @@ -0,0 +1,33 @@ +--- ./texk/dvipdfm/pngimage.c.orig 2002-12-25 11:51:16.000000000 -0600 ++++ ./texk/dvipdfm/pngimage.c 2010-02-19 11:43:18.000000000 -0600 +@@ -42,7 +42,7 @@ + rewind (png_file); + if (fread (sigbytes, 1, sizeof(sigbytes), png_file) != + sizeof(sigbytes) || +- (!png_check_sig (sigbytes, sizeof(sigbytes)))) ++ (!(png_sig_cmp(sigbytes, 0, sizeof(sigbytes)) == 0))) + return 0; + else + return 1; +--- ./texk/dvipdfm/thumbnail.c.orig 2002-12-25 11:51:16.000000000 -0600 ++++ ./texk/dvipdfm/thumbnail.c 2010-02-19 11:42:41.000000000 -0600 +@@ -79,7 +79,7 @@ + } + if (fread (sigbytes, 1, sizeof(sigbytes), thumb_file) != + sizeof(sigbytes) || +- (!png_check_sig (sigbytes, sizeof(sigbytes)))) { ++ (!(png_sig_cmp(sigbytes, 0, sizeof(sigbytes)) == 0))) { + fprintf (stderr, "\nThumbnail not a png file! Skipping\n"); + return NULL; + } +--- ./libs/gd/gd_png.c.orig 2004-10-28 13:09:52.000000000 -0500 ++++ ./libs/gd/gd_png.c 2010-02-19 11:52:06.000000000 -0600 +@@ -143,7 +143,7 @@ + /* first do a quick check that the file really is a PNG image; could + * have used slightly more general png_sig_cmp() function instead */ + gdGetBuf (sig, 8, infile); +- if (!png_check_sig (sig, 8)) ++ if (!(png_sig_cmp(sig, 0, 8) == 0)) + return NULL; /* bad signature */ + + #ifndef PNG_SETJMP_NOT_SUPPORTED diff --git a/source/t/transfig/transfig.SlackBuild b/source/t/transfig/transfig.SlackBuild index 70aa22133..051fb8a3b 100755 --- a/source/t/transfig/transfig.SlackBuild +++ b/source/t/transfig/transfig.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,8 +23,17 @@ PKGNAM=transfig VERSION=${VERSION:-3.2.4} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -61,8 +70,10 @@ find . \ zcat $CWD/transfig.diff.gz | sed -e "s#/usr/lib/#/usr/lib${LIBDIRSUFFIX}/#" \ | patch -p1 --verbose || exit 1 zcat $CWD/transfig.3.2.4-gcc4.patch.gz | patch -p1 --verbose || exit 1 -xmkmf -make Makefiles +zcat $CWD/transfig.png14.nodither.diff.gz | patch -p1 --verbose || exit 1 + +xmkmf || exit 1 +make Makefiles || exit 1 # Build and install: make $NUMJOBS || make || exit 1 diff --git a/source/t/transfig/transfig.png14.nodither.diff b/source/t/transfig/transfig.png14.nodither.diff new file mode 100644 index 000000000..3964955ad --- /dev/null +++ b/source/t/transfig/transfig.png14.nodither.diff @@ -0,0 +1,11 @@ +--- ./fig2dev/dev/readpng.c.orig 2002-12-18 16:40:35.000000000 -0600 ++++ ./fig2dev/dev/readpng.c 2010-02-19 19:25:54.000000000 -0600 +@@ -127,7 +127,7 @@ + + if (png_get_PLTE(png_ptr, info_ptr, &palette, &num_palette)) { + png_get_hIST(png_ptr, info_ptr, &histogram); +- png_set_dither(png_ptr, palette, num_palette, 256, histogram, 0); ++ /* png_set_dither(png_ptr, palette, num_palette, 256, histogram, 0); */ + } + } + if (color_type == PNG_COLOR_TYPE_GRAY || color_type == PNG_COLOR_TYPE_GRAY_ALPHA) { diff --git a/source/t/xfig/xfig.SlackBuild b/source/t/xfig/xfig.SlackBuild index 010106ad0..00145d311 100755 --- a/source/t/xfig/xfig.SlackBuild +++ b/source/t/xfig/xfig.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2007,2008,2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,17 @@ VERSION=3.2.4 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +BUILD=${BUILD:-5} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -69,8 +78,11 @@ zcat $CWD/xfig.no.xfig_ref_en.pdf.diff.gz | patch -E -p1 --verbose || exit 1 # Use Firefox and xpdf, not netscape and acroread: zcat $CWD/xfig.fig.ad.diff.gz | patch -E -p1 --verbose || exit 1 zcat $CWD/xfig.docs.location.diff.gz | patch -E -p1 --verbose || exit 1 +# Drop a call to a function no longer included in libpng-1.4.0 (by default, +# anyway) to see if it really matters. +zcat $CWD/xfig.png14.nodither.diff.gz | patch -p1 --verbose || exit 1 -xmkmf +xmkmf || exit 1 make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 make install.man DESTDIR=$PKG || exit 1 @@ -84,12 +96,20 @@ gzip -9 $PKG/usr/man/man1/* mkdir -p $PKG/usr/doc/xfig-$VERSION cp -a \ - CHANGES FIGAPPS LATEX.AND.XFIG README \ + FIGAPPS LATEX.AND.XFIG README \ $PKG/usr/doc/xfig-$VERSION ( cd $PKG/usr/doc/xfig-$VERSION ln -sf /usr/lib${LIBDIRSUFFIX}/X11/xfig/Libraries Libraries ) +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/t/xfig/xfig.png14.nodither.diff b/source/t/xfig/xfig.png14.nodither.diff new file mode 100644 index 000000000..512e236ab --- /dev/null +++ b/source/t/xfig/xfig.png14.nodither.diff @@ -0,0 +1,11 @@ +--- ./f_readpng.c.orig 2002-09-19 16:07:59.000000000 -0500 ++++ ./f_readpng.c 2010-02-19 19:31:42.000000000 -0600 +@@ -133,7 +133,7 @@ + + if (png_get_PLTE(png_ptr, info_ptr, &palette, &num_palette)) { + png_get_hIST(png_ptr, info_ptr, &histogram); +- png_set_dither(png_ptr, palette, num_palette, 256, histogram, 0); ++ /* png_set_dither(png_ptr, palette, num_palette, 256, histogram, 0); */ + } + } + if (color_type == PNG_COLOR_TYPE_GRAY || color_type == PNG_COLOR_TYPE_GRAY_ALPHA) { diff --git a/source/tcl/tcl/tcl.SlackBuild b/source/tcl/tcl/tcl.SlackBuild index 2d65ec5fa..596305f0b 100755 --- a/source/tcl/tcl/tcl.SlackBuild +++ b/source/tcl/tcl/tcl.SlackBuild @@ -21,11 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-8.5.7} +VERSION=${VERSION:-8.5.8} # See also version number 8.5 in the symlinks below...) -ARCH=${ARCH:-x86_64} BUILD=1 +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-tcl @@ -75,6 +84,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --enable-shared \ + --enable-threads \ --enable-man-symlinks \ --enable-man-compression=gzip \ ${CONFARGS} \ diff --git a/source/tcl/tclx/tclx.SlackBuild b/source/tcl/tclx/tclx.SlackBuild index b8ca23e9c..f6d538cea 100755 --- a/source/tcl/tclx/tclx.SlackBuild +++ b/source/tcl/tclx/tclx.SlackBuild @@ -23,10 +23,18 @@ PKGNAM=tclx VERSION=${VERSION:-8.4} -ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} - +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -69,6 +77,7 @@ CFLAGS="$SLKCFLAGS" \ --with-tcl=/usr/lib${LIBDIRSUFFIX} \ --enable-tk=YES \ --enable-shared \ + --enable-threads \ --enable-64bit \ --build=$ARCH-slackware-linux diff --git a/source/tcl/tix/tix.SlackBuild b/source/tcl/tix/tix.SlackBuild index 2f83a6d65..56b62f555 100755 --- a/source/tcl/tix/tix.SlackBuild +++ b/source/tcl/tix/tix.SlackBuild @@ -24,9 +24,18 @@ PKGNAM=tix VERSION=8.4.3 -ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -64,6 +73,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --enable-shared \ + --enable-threads \ --with-tcl=/usr/lib${LIBDIRSUFFIX} \ --with-tk=/usr/lib${LIBDIRSUFFIX} \ --build=$ARCH-slackware-linux diff --git a/source/tcl/tk/tk.SlackBuild b/source/tcl/tk/tk.SlackBuild index 90f191ceb..32a183d3c 100755 --- a/source/tcl/tk/tk.SlackBuild +++ b/source/tcl/tk/tk.SlackBuild @@ -21,11 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-8.5.7} +VERSION=${VERSION:-8.5.8} # See also version number 8.5 in the symlinks below...) -ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -75,6 +84,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --enable-shared \ + --enable-threads \ --enable-64bit \ --enable-man-symlinks \ --enable-man-compression=gzip \ diff --git a/source/x/dejavu-fonts-ttf/dejavu-fonts-ttf.SlackBuild b/source/x/dejavu-fonts-ttf/dejavu-fonts-ttf.SlackBuild index 68bac2327..6bbaa8212 100755 --- a/source/x/dejavu-fonts-ttf/dejavu-fonts-ttf.SlackBuild +++ b/source/x/dejavu-fonts-ttf/dejavu-fonts-ttf.SlackBuild @@ -21,7 +21,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.29} +VERSION=${VERSION:-2.30} ARCH=noarch BUILD=1 diff --git a/source/x/fontconfig/doinst.sh b/source/x/fontconfig/doinst.sh new file mode 100644 index 000000000..6a4802323 --- /dev/null +++ b/source/x/fontconfig/doinst.sh @@ -0,0 +1,7 @@ +# Update the X font indexes: +if [ -x /usr/bin/fc-cache ]; then + /usr/bin/fc-cache -f +fi +# else we'll catch it later with setup.fontconfig :-) +# make links: + diff --git a/source/x/fontconfig/fontconfig.SlackBuild b/source/x/fontconfig/fontconfig.SlackBuild index 4714b824f..5feb6fd90 100755 --- a/source/x/fontconfig/fontconfig.SlackBuild +++ b/source/x/fontconfig/fontconfig.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.6.0 -export ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo fontconfig-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -39,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -46,7 +59,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf fontconfig-$VERSION -tar xvf $CWD/fontconfig-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/fontconfig-$VERSION.tar.?z* || exit 1 cd fontconfig-$VERSION chown -R root:root . find . \ @@ -55,8 +68,6 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -FCPREFIX=/usr - # The wonderful extended version of the font so generously # opened up for free modification and distribution by one # for the previously proprietary font founderies, and that @@ -71,30 +82,32 @@ zcat $CWD/fontconfig.font.dir.list.diff.gz | patch -p1 --verbose --backup --suff CFLAGS=$SLKCFLAGS \ ./configure \ - --prefix=$FCPREFIX \ - --libdir=$FCPREFIX/lib${LIBDIRSUFFIX} \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ --mandir=/usr/man \ --sysconfdir=/etc \ - --localstatedir=/var + --localstatedir=/var \ + --build=$ARCH-slackware-linux # Uses a currently non-functional sgml tool, thus '-i': make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# This ought to be easily found here, but it's still safer to move it: -if [ ! -d $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig ]; then - mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig - mv ${PKG}${FCPREFIX}/lib${LIBDIRSUFFIX}/pkgconfig/* $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig - rmdir ${PKG}${FCPREFIX}/lib${LIBDIRSUFFIX}/pkgconfig -fi - mkdir -p $PKG/usr/doc/fontconfig-$VERSION cp -a \ AUTHORS COPYING* INSTALL NEWS README \ $PKG/usr/doc/fontconfig-$VERSION # You can shop for this kind of stuff in the source tarball. -rm -rf ${PKG}${FCPREFIX}/share/doc -rmdir ${PKG}${FCPREFIX}/share +rm -rf $PKG/usr/share/doc +rmdir $PKG/usr/share 2>/dev/null + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/var/log/setup cat $CWD/setup.05.fontconfig > $PKG/var/log/setup/setup.05.fontconfig @@ -133,8 +146,8 @@ if [ ! $? = 0 ]; then fi # Fix manpages: -if [ -d ${PKG}${FCPREFIX}/man ]; then - ( cd ${PKG}${FCPREFIX}/man +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man for manpagedir in $(find . -type d -name "man*") ; do ( cd $manpagedir for eachpage in $( find . -type l -maxdepth 1) ; do @@ -148,16 +161,8 @@ if [ -d ${PKG}${FCPREFIX}/man ]; then fi mkdir $PKG/install -cat << EOF >> $PKG/install/doinst.sh -#!/bin/sh -# Update the X font indexes: -if [ -x /usr/bin/fc-cache ]; then - /usr/bin/fc-cache -f -fi -# else we'll catch it later with setup.fontconfig :-) -# make links: -EOF cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG /sbin/makepkg -l y -c n $TMP/fontconfig-$VERSION-$ARCH-$BUILD.txz diff --git a/source/x/fontconfig/fontconfig.dejavu.diff b/source/x/fontconfig/fontconfig.dejavu.diff index 95f8e71e1..af71a44bd 100644 --- a/source/x/fontconfig/fontconfig.dejavu.diff +++ b/source/x/fontconfig/fontconfig.dejavu.diff @@ -1,5 +1,6 @@ ---- ./conf.d/45-latin.conf.orig 2008-05-03 20:02:06.000000000 -0500 -+++ ./conf.d/45-latin.conf 2008-09-17 21:57:28.000000000 -0500 +diff -Nur fontconfig-2.8.0.orig/conf.d/45-latin.conf fontconfig-2.8.0/conf.d/45-latin.conf +--- fontconfig-2.8.0.orig/conf.d/45-latin.conf 2009-11-16 11:24:52.000000000 -0600 ++++ fontconfig-2.8.0/conf.d/45-latin.conf 2009-12-01 21:45:42.639936724 -0600 @@ -10,9 +10,9 @@ Serif faces --> @@ -30,11 +31,12 @@ <family>DejaVu Sans Mono</family> <family>Liberation Mono</family> + <family>Bitstream Vera Sans Mono</family> + <family>Inconsolata</family> <family>Courier New</family> <family>Courier</family> - <family>Andale Mono</family> ---- ./conf.d/60-latin.conf.orig 2008-05-03 21:17:18.000000000 -0500 -+++ ./conf.d/60-latin.conf 2008-09-17 21:56:37.000000000 -0500 +diff -Nur fontconfig-2.8.0.orig/conf.d/60-latin.conf fontconfig-2.8.0/conf.d/60-latin.conf +--- fontconfig-2.8.0.orig/conf.d/60-latin.conf 2009-11-16 11:24:52.000000000 -0600 ++++ fontconfig-2.8.0/conf.d/60-latin.conf 2009-12-01 21:46:39.925935327 -0600 @@ -4,8 +4,8 @@ <alias> <family>serif</family> @@ -62,6 +64,6 @@ - <family>Bitstream Vera Sans Mono</family> <family>DejaVu Sans Mono</family> + <family>Bitstream Vera Sans Mono</family> + <family>Inconsolata</family> <family>Andale Mono</family> <family>Courier New</family> - <family>Cumberland AMT</family> diff --git a/source/x/fontconfig/fontconfig.font.dir.list.diff b/source/x/fontconfig/fontconfig.font.dir.list.diff index a11ef0b6d..1e68b0d12 100644 --- a/source/x/fontconfig/fontconfig.font.dir.list.diff +++ b/source/x/fontconfig/fontconfig.font.dir.list.diff @@ -1,24 +1,25 @@ ---- ./fonts.conf.in.orig 2007-10-25 16:14:27.000000000 -0500 -+++ ./fonts.conf.in 2008-09-22 15:42:21.000000000 -0500 +diff -Nur fontconfig-2.8.0.orig/fonts.conf.in fontconfig-2.8.0/fonts.conf.in +--- fontconfig-2.8.0.orig/fonts.conf.in 2009-06-28 12:48:47.000000000 -0500 ++++ fontconfig-2.8.0/fonts.conf.in 2009-12-01 21:48:48.134935536 -0600 @@ -23,10 +23,21 @@ <!-- Font directory list --> - <dir>@FC_DEFAULT_FONTS@</dir> - @FC_FONTPATH@ -+ <dir>/usr/share/fonts/OTF</dir> -+ <dir>/usr/share/fonts/TTF</dir> -+ <dir>/usr/share/fonts/Type1</dir> -+ <dir>/usr/share/fonts/Speedo</dir> -+ <dir>/usr/share/fonts/cyrillic</dir> -+ <dir>/usr/share/fonts/misc</dir> ++ <dir>/usr/share/fonts/OTF</dir> ++ <dir>/usr/share/fonts/TTF</dir> ++ <dir>/usr/share/fonts/Type1</dir> ++ <dir>/usr/share/fonts/Speedo</dir> ++ <dir>/usr/share/fonts/cyrillic</dir> ++ <dir>/usr/share/fonts/misc</dir> <dir>~/.fonts</dir> +<!-- Commented out font directories: +These are not indexed by default, as fontconfig then seems +to prefer bitmapped fonts in some cases... -+ <dir>/usr/share/fonts/100dpi</dir> -+ <dir>/usr/share/fonts/75dpi</dir> ++ <dir>/usr/share/fonts/100dpi</dir> ++ <dir>/usr/share/fonts/75dpi</dir> +--> + <!-- diff --git a/source/x/libdrm/libdrm.SlackBuild b/source/x/libdrm/libdrm.SlackBuild index 5250cff64..fff398a10 100755 --- a/source/x/libdrm/libdrm.SlackBuild +++ b/source/x/libdrm/libdrm.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PKGNAM=libdrm -VERSION=${VERSION:-2.4.12} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} @@ -39,15 +48,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION +# Fix missing definitions in drm_mode.h: +zcat $CWD/libdrm.uint32_t.diff.gz | patch -p1 --verbose || exit 1 + # Make sure ownerships and permissions are sane: chown -R root:root . find . \ @@ -62,6 +77,8 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --enable-udev \ + --enable-nouveau-experimental-api \ + --enable-vmwgfx-experimental-api \ --build=$ARCH-slackware-linux # Build and install: diff --git a/source/x/libdrm/libdrm.uint32_t.diff b/source/x/libdrm/libdrm.uint32_t.diff new file mode 100644 index 000000000..571d72ac1 --- /dev/null +++ b/source/x/libdrm/libdrm.uint32_t.diff @@ -0,0 +1,11 @@ +--- ./include/drm/drm_mode.h.orig 2010-01-21 12:45:40.000000000 -0600 ++++ ./include/drm/drm_mode.h 2010-02-22 13:16:36.000000000 -0600 +@@ -307,6 +307,8 @@ + #define DRM_MODE_PAGE_FLIP_EVENT 0x01 + #define DRM_MODE_PAGE_FLIP_FLAGS DRM_MODE_PAGE_FLIP_EVENT + ++#include <stdint.h> /* needed for uint32_t and uint64_t typedefs */ ++ + struct drm_mode_crtc_page_flip { + uint32_t crtc_id; + uint32_t fb_id; diff --git a/source/x/mesa/mesa.SlackBuild b/source/x/mesa/mesa.SlackBuild index 88696e3f9..d4579625d 100755 --- a/source/x/mesa/mesa.SlackBuild +++ b/source/x/mesa/mesa.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,13 +21,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PKGNAM=mesa -VERSION=${VERSION:-7.5} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo MesaLib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +PKG_VERSION=${VERSION} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + # Be sure this list is up-to-date: -#DRI_DRIVERS="i810,i915,i965,mach64,mga,nouveau,r128,r200,r300,radeon,s3v,savage,sis,tdfx,trident,unichrome,ffb,swrast" -DRI_DRIVERS="i810,i915,i965,mach64,mga,r128,r200,r300,radeon,s3v,savage,sis,tdfx,trident,unichrome,ffb,swrast" +DRI_DRIVERS="i810,i915,i965,mach64,mga,r128,r200,r300,r600,radeon,savage,sis,tdfx,unichrome,swrast" NUMJOBS=${NUMJOBS:--j8} @@ -50,9 +60,9 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf Mesa-${VERSION} -tar xvf $CWD/MesaLib-$VERSION.tar.xz || exit 1 -tar xvf $CWD/MesaGLUT-$VERSION.tar.xz || exit 1 -tar xvf $CWD/MesaDemos-$VERSION.tar.xz || exit 1 +tar xvf $CWD/MesaLib-${PKG_VERSION}.tar.?z* || exit 1 +tar xvf $CWD/MesaGLUT-${PKG_VERSION}.tar.?z* || exit 1 +tar xvf $CWD/MesaDemos-${PKG_VERSION}.tar.?z* || exit 1 cd Mesa-$VERSION # Make sure ownerships and permissions are sane: @@ -77,17 +87,22 @@ CFLAGS="$SLKCFLAGS" \ # Nobody else is enabling this. Seems like it's asking for trouble. # --enable-xcb +# This doesn't seem to build - maybe it needs something else... +# --enable-gallium-nouveau + make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Install gears and glinfo manually, and make symlinks from the names -# of the deprecated similar programs to reduce confusion: +# Install gears and glinfo: mkdir -p $PKG/usr/bin cp -a progs/demos/gears $PKG/usr/bin/gears cp -a progs/demos/glinfo $PKG/usr/bin/glinfo -( cd $PKG/usr/bin - ln -sf glinfo glxinfo - ln -sf gears glxgears + +# Install some "demos": +( cd progs/xdemos + cp glthreads glxcontexts glxdemo glxgears glxgears_fbconfig glxheads \ + glxinfo glxpbdemo glxpixmap \ + $PKG/usr/bin ) # Strip binaries: @@ -117,14 +132,14 @@ if [ -d $PKG/usr/info ]; then ) fi -mkdir -p $PKG/usr/doc/Mesa-$VERSION/html -cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/Mesa-$VERSION +mkdir -p $PKG/usr/doc/Mesa-$PKG_VERSION/html +cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/Mesa-$PKG_VERSION rm -f docs/relnotes*.html docs/RELNOTES* -cp -a docs/*.html $PKG/usr/doc/Mesa-$VERSION/html +cp -a docs/*.html $PKG/usr/doc/Mesa-$PKG_VERSION/html mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$PKG_VERSION-$ARCH-$BUILD.txz diff --git a/source/x/mesa/mesa.url b/source/x/mesa/mesa.url new file mode 100644 index 000000000..f4efeae63 --- /dev/null +++ b/source/x/mesa/mesa.url @@ -0,0 +1 @@ +ftp://ftp.freedesktop.org/pub/mesa/ diff --git a/source/x/x11/build/compiz b/source/x/x11/build/compiz deleted file mode 100644 index b8626c4cf..000000000 --- a/source/x/x11/build/compiz +++ /dev/null @@ -1 +0,0 @@ -4 diff --git a/source/x/x11/build/font-adobe-100dpi b/source/x/x11/build/font-adobe-100dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-adobe-100dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-adobe-75dpi b/source/x/x11/build/font-adobe-75dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-adobe-75dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-adobe-utopia-100dpi b/source/x/x11/build/font-adobe-utopia-100dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-adobe-utopia-100dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-adobe-utopia-75dpi b/source/x/x11/build/font-adobe-utopia-75dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-adobe-utopia-75dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-adobe-utopia-type1 b/source/x/x11/build/font-adobe-utopia-type1 deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-adobe-utopia-type1 +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-arabic-misc b/source/x/x11/build/font-arabic-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-arabic-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bh-100dpi b/source/x/x11/build/font-bh-100dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bh-100dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bh-75dpi b/source/x/x11/build/font-bh-75dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bh-75dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bh-lucidatypewriter-100dpi b/source/x/x11/build/font-bh-lucidatypewriter-100dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bh-lucidatypewriter-100dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bh-lucidatypewriter-75dpi b/source/x/x11/build/font-bh-lucidatypewriter-75dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bh-lucidatypewriter-75dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bh-ttf b/source/x/x11/build/font-bh-ttf deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bh-ttf +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bh-type1 b/source/x/x11/build/font-bh-type1 deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bh-type1 +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bitstream-100dpi b/source/x/x11/build/font-bitstream-100dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bitstream-100dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bitstream-75dpi b/source/x/x11/build/font-bitstream-75dpi deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bitstream-75dpi +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bitstream-speedo b/source/x/x11/build/font-bitstream-speedo deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bitstream-speedo +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-bitstream-type1 b/source/x/x11/build/font-bitstream-type1 deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-bitstream-type1 +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-cronyx-cyrillic b/source/x/x11/build/font-cronyx-cyrillic deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-cronyx-cyrillic +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-cursor-misc b/source/x/x11/build/font-cursor-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-cursor-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-daewoo-misc b/source/x/x11/build/font-daewoo-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-daewoo-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-dec-misc b/source/x/x11/build/font-dec-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-dec-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-ibm-type1 b/source/x/x11/build/font-ibm-type1 deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-ibm-type1 +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-isas-misc b/source/x/x11/build/font-isas-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-isas-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-jis-misc b/source/x/x11/build/font-jis-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-jis-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-micro-misc b/source/x/x11/build/font-micro-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-micro-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-misc-cyrillic b/source/x/x11/build/font-misc-cyrillic deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-misc-cyrillic +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-misc-ethiopic b/source/x/x11/build/font-misc-ethiopic deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-misc-ethiopic +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-misc-meltho b/source/x/x11/build/font-misc-meltho deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-misc-meltho +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-misc-misc b/source/x/x11/build/font-misc-misc deleted file mode 100644 index b8626c4cf..000000000 --- a/source/x/x11/build/font-misc-misc +++ /dev/null @@ -1 +0,0 @@ -4 diff --git a/source/x/x11/build/font-mutt-misc b/source/x/x11/build/font-mutt-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-mutt-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-schumacher-misc b/source/x/x11/build/font-schumacher-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-schumacher-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-screen-cyrillic b/source/x/x11/build/font-screen-cyrillic deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-screen-cyrillic +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-sony-misc b/source/x/x11/build/font-sony-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-sony-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-sun-misc b/source/x/x11/build/font-sun-misc deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-sun-misc +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/font-winitzki-cyrillic b/source/x/x11/build/font-winitzki-cyrillic deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/font-winitzki-cyrillic +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/imake b/source/x/x11/build/imake deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/imake +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/libXScrnSaver b/source/x/x11/build/libXScrnSaver deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXScrnSaver +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXau b/source/x/x11/build/libXau deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXau +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXcomposite b/source/x/x11/build/libXcomposite deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXcomposite +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXcursor b/source/x/x11/build/libXcursor deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXcursor +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXdamage b/source/x/x11/build/libXdamage deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXdamage +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXdmcp b/source/x/x11/build/libXdmcp deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXdmcp +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXfixes b/source/x/x11/build/libXfixes deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXfixes +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXfontcache b/source/x/x11/build/libXfontcache deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXfontcache +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXft b/source/x/x11/build/libXft deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXft +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXinerama b/source/x/x11/build/libXinerama deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXinerama +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXmu b/source/x/x11/build/libXmu deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXmu +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXpm b/source/x/x11/build/libXpm deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXpm +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXrender b/source/x/x11/build/libXrender deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXrender +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXres b/source/x/x11/build/libXres deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXres +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXtst b/source/x/x11/build/libXtst deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXtst +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXv b/source/x/x11/build/libXv deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXv +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXvMC b/source/x/x11/build/libXvMC deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXvMC +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXxf86dga b/source/x/x11/build/libXxf86dga deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXxf86dga +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXxf86misc b/source/x/x11/build/libXxf86misc deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXxf86misc +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libXxf86vm b/source/x/x11/build/libXxf86vm deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libXxf86vm +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libdmx b/source/x/x11/build/libdmx deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libdmx +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libfontenc b/source/x/x11/build/libfontenc deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libfontenc +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/liblbxutil b/source/x/x11/build/liblbxutil deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/liblbxutil +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libpthread-stubs b/source/x/x11/build/libpthread-stubs deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libpthread-stubs +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/libxkbfile b/source/x/x11/build/libxkbfile deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/libxkbfile +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/listres b/source/x/x11/build/listres deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/listres +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/luit b/source/x/x11/build/luit deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/luit +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/makedepend b/source/x/x11/build/makedepend deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/makedepend +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/mkcomposecache b/source/x/x11/build/mkcomposecache deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/mkcomposecache +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/mkfontdir b/source/x/x11/build/mkfontdir deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/mkfontdir +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/recordproto b/source/x/x11/build/recordproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/recordproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/resourceproto b/source/x/x11/build/resourceproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/resourceproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/scrnsaverproto b/source/x/x11/build/scrnsaverproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/scrnsaverproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/smproxy b/source/x/x11/build/smproxy deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/smproxy +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/twm b/source/x/x11/build/twm index 0cfbf0888..00750edc0 100644 --- a/source/x/x11/build/twm +++ b/source/x/x11/build/twm @@ -1 +1 @@ -2 +3 diff --git a/source/x/x11/build/videoproto b/source/x/x11/build/videoproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/videoproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/viewres b/source/x/x11/build/viewres deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/viewres +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/x11perf b/source/x/x11/build/x11perf deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/x11perf +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xauth b/source/x/x11/build/xauth deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xauth +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xbacklight b/source/x/x11/build/xbacklight deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xbacklight +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xbiff b/source/x/x11/build/xbiff deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xbiff +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xbitmaps b/source/x/x11/build/xbitmaps deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xbitmaps +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xcalc b/source/x/x11/build/xcalc deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xcalc +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xclipboard b/source/x/x11/build/xclipboard deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xclipboard +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xclock b/source/x/x11/build/xclock deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xclock +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xcmiscproto b/source/x/x11/build/xcmiscproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xcmiscproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xcmsdb b/source/x/x11/build/xcmsdb deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xcmsdb +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xcompmgr b/source/x/x11/build/xcompmgr deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xcompmgr +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xcursor-themes b/source/x/x11/build/xcursor-themes deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xcursor-themes +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xcursorgen b/source/x/x11/build/xcursorgen deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xcursorgen +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xdriinfo b/source/x/x11/build/xdriinfo deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xdriinfo +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xev b/source/x/x11/build/xev deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xev +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xeyes b/source/x/x11/build/xeyes deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xeyes +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/appres b/source/x/x11/build/xf86-input-vmmouse index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/appres +++ b/source/x/x11/build/xf86-input-vmmouse diff --git a/source/x/x11/build/bdftopcf b/source/x/x11/build/xf86-video-apm index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/bdftopcf +++ b/source/x/x11/build/xf86-video-apm diff --git a/source/x/x11/build/bigreqsproto b/source/x/x11/build/xf86-video-ast index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/bigreqsproto +++ b/source/x/x11/build/xf86-video-ast diff --git a/source/x/x11/build/xf86-video-ati b/source/x/x11/build/xf86-video-ati deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xf86-video-ati +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/bitmap b/source/x/x11/build/xf86-video-cirrus index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/bitmap +++ b/source/x/x11/build/xf86-video-cirrus diff --git a/source/x/x11/build/compositeproto b/source/x/x11/build/xf86-video-glint index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/compositeproto +++ b/source/x/x11/build/xf86-video-glint diff --git a/source/x/x11/build/damageproto b/source/x/x11/build/xf86-video-i128 index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/damageproto +++ b/source/x/x11/build/xf86-video-i128 diff --git a/source/x/x11/build/dmxproto b/source/x/x11/build/xf86-video-i740 index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/dmxproto +++ b/source/x/x11/build/xf86-video-i740 diff --git a/source/x/x11/build/editres b/source/x/x11/build/xf86-video-mach64 index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/editres +++ b/source/x/x11/build/xf86-video-mach64 diff --git a/source/x/x11/build/encodings b/source/x/x11/build/xf86-video-mga index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/encodings +++ b/source/x/x11/build/xf86-video-mga diff --git a/source/x/x11/build/evieext b/source/x/x11/build/xf86-video-neomagic index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/evieext +++ b/source/x/x11/build/xf86-video-neomagic diff --git a/source/x/x11/build/xf86-video-nsc b/source/x/x11/build/xf86-video-nsc deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xf86-video-nsc +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xf86-video-openchrome b/source/x/x11/build/xf86-video-openchrome deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xf86-video-openchrome +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/fixesproto b/source/x/x11/build/xf86-video-r128 index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/fixesproto +++ b/source/x/x11/build/xf86-video-r128 diff --git a/source/x/x11/build/font-alias b/source/x/x11/build/xf86-video-s3 index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/font-alias +++ b/source/x/x11/build/xf86-video-s3 diff --git a/source/x/x11/build/font-util b/source/x/x11/build/xf86-video-s3virge index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/font-util +++ b/source/x/x11/build/xf86-video-s3virge diff --git a/source/x/x11/build/font-xfree86-type1 b/source/x/x11/build/xf86-video-savage index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/font-xfree86-type1 +++ b/source/x/x11/build/xf86-video-savage diff --git a/source/x/x11/build/fontcacheproto b/source/x/x11/build/xf86-video-sis index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/fontcacheproto +++ b/source/x/x11/build/xf86-video-sis diff --git a/source/x/x11/build/fontsproto b/source/x/x11/build/xf86-video-sisusb index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/fontsproto +++ b/source/x/x11/build/xf86-video-sisusb diff --git a/source/x/x11/build/iceauth b/source/x/x11/build/xf86-video-tdfx index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/iceauth +++ b/source/x/x11/build/xf86-video-tdfx diff --git a/source/x/x11/build/xf86-video-v4l b/source/x/x11/build/xf86-video-v4l index 0cfbf0888..00750edc0 100644 --- a/source/x/x11/build/xf86-video-v4l +++ b/source/x/x11/build/xf86-video-v4l @@ -1 +1 @@ -2 +3 diff --git a/source/x/x11/build/kbproto b/source/x/x11/build/xf86-video-vesa index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/kbproto +++ b/source/x/x11/build/xf86-video-vesa diff --git a/source/x/x11/build/lbxproxy b/source/x/x11/build/xf86-video-vmware index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/lbxproxy +++ b/source/x/x11/build/xf86-video-vmware diff --git a/source/x/x11/build/libICE b/source/x/x11/build/xf86-video-voodoo index 0cfbf0888..0cfbf0888 100644 --- a/source/x/x11/build/libICE +++ b/source/x/x11/build/xf86-video-voodoo diff --git a/source/x/x11/build/xf86bigfontproto b/source/x/x11/build/xf86bigfontproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xf86bigfontproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xf86dgaproto b/source/x/x11/build/xf86dgaproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xf86dgaproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xf86driproto b/source/x/x11/build/xf86driproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xf86driproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xf86miscproto b/source/x/x11/build/xf86miscproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xf86miscproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xf86vidmodeproto b/source/x/x11/build/xf86vidmodeproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xf86vidmodeproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xgamma b/source/x/x11/build/xgamma deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xgamma +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xhost b/source/x/x11/build/xhost deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xhost +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xineramaproto b/source/x/x11/build/xineramaproto deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xineramaproto +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xkbevd b/source/x/x11/build/xkbevd deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xkbevd +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xkbprint b/source/x/x11/build/xkbprint deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xkbprint +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xkbutils b/source/x/x11/build/xkbutils deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xkbutils +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xkill b/source/x/x11/build/xkill deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xkill +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xlogo b/source/x/x11/build/xlogo deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xlogo +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xlsatoms b/source/x/x11/build/xlsatoms deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xlsatoms +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xlsclients b/source/x/x11/build/xlsclients deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xlsclients +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xmag b/source/x/x11/build/xmag deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xmag +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xman b/source/x/x11/build/xman deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xman +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xmessage b/source/x/x11/build/xmessage deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xmessage +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xmodmap b/source/x/x11/build/xmodmap deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xmodmap +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xorg-cf-files b/source/x/x11/build/xorg-cf-files deleted file mode 100644 index 00750edc0..000000000 --- a/source/x/x11/build/xorg-cf-files +++ /dev/null @@ -1 +0,0 @@ -3 diff --git a/source/x/x11/build/xorg-docs b/source/x/x11/build/xorg-docs deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xorg-docs +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xorg-sgml-doctools b/source/x/x11/build/xorg-sgml-doctools deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xorg-sgml-doctools +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xpr b/source/x/x11/build/xpr deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xpr +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xprop b/source/x/x11/build/xprop deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xprop +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xproxymanagementprotocol b/source/x/x11/build/xproxymanagementprotocol deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xproxymanagementprotocol +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xrdb b/source/x/x11/build/xrdb deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xrdb +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xrefresh b/source/x/x11/build/xrefresh deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xrefresh +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xset b/source/x/x11/build/xset deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xset +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xsetroot b/source/x/x11/build/xsetroot deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xsetroot +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xvidtune b/source/x/x11/build/xvidtune deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xvidtune +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xvinfo b/source/x/x11/build/xvinfo deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xvinfo +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/build/xwud b/source/x/x11/build/xwud deleted file mode 100644 index 0cfbf0888..000000000 --- a/source/x/x11/build/xwud +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/source/x/x11/configure/font-util b/source/x/x11/configure/font-util new file mode 100644 index 000000000..698241b33 --- /dev/null +++ b/source/x/x11/configure/font-util @@ -0,0 +1,12 @@ +CFLAGS=$SLKCFLAGS \ +CXXFLAGS=$SLKCFLAGS \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --infodir=/usr/info \ + --mandir=/usr/man \ + --with-fontrootdir=/usr/share/fonts \ + --disable-static \ + --build=$ARCH-slackware-linux diff --git a/source/x/x11/configure/xf86-input-vmmouse b/source/x/x11/configure/xf86-input-vmmouse new file mode 100644 index 000000000..1b99250b6 --- /dev/null +++ b/source/x/x11/configure/xf86-input-vmmouse @@ -0,0 +1,15 @@ +CFLAGS=$SLKCFLAGS \ +CXXFLAGS=$SLKCFLAGS \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --infodir=/usr/info \ + --mandir=/usr/man \ + --disable-static \ + --with-hal-bin-dir=/usr/bin \ + --with-hal-callouts-dir=/usr/libexec \ + --with-hal-fdi-dir=/usr/share/hal/fdi/policy/10osvendor \ + --with-udev-rules-dir=none \ + --build=$ARCH-slackware-linux diff --git a/source/x/x11/configure/xf86-video-ati b/source/x/x11/configure/xf86-video-ati index 6e41b488e..ae2458849 100644 --- a/source/x/x11/configure/xf86-video-ati +++ b/source/x/x11/configure/xf86-video-ati @@ -1,9 +1,11 @@ -xserver_source="/tmp/x11-build/xorg-server-1.6.2" +xserver_source="/tmp/x11-build/xorg-server-1.7.5" -if [ ! -d "$xserver_source" ]; then - echo "$xserver_source does not exist, and you need it." - exit 1 -fi +# Let these just fail to build. In any case, an "exit 1" +# here is just plain wrong. +#if [ ! -d "$xserver_source" ]; then +# echo "$xserver_source does not exist, and you need it." +# exit 1 +#fi CFLAGS="$SLKCFLAGS -I${xserver_source}/hw/xfree86/ramdac" \ CXXFLAGS="$SLKCFLAGS -I${xserver_source}/hw/xfree86/ramdac" \ diff --git a/source/x/x11/configure/xf86-video-nv b/source/x/x11/configure/xf86-video-nv index 6e41b488e..ae2458849 100644 --- a/source/x/x11/configure/xf86-video-nv +++ b/source/x/x11/configure/xf86-video-nv @@ -1,9 +1,11 @@ -xserver_source="/tmp/x11-build/xorg-server-1.6.2" +xserver_source="/tmp/x11-build/xorg-server-1.7.5" -if [ ! -d "$xserver_source" ]; then - echo "$xserver_source does not exist, and you need it." - exit 1 -fi +# Let these just fail to build. In any case, an "exit 1" +# here is just plain wrong. +#if [ ! -d "$xserver_source" ]; then +# echo "$xserver_source does not exist, and you need it." +# exit 1 +#fi CFLAGS="$SLKCFLAGS -I${xserver_source}/hw/xfree86/ramdac" \ CXXFLAGS="$SLKCFLAGS -I${xserver_source}/hw/xfree86/ramdac" \ diff --git a/source/x/x11/configure/xorg-server b/source/x/x11/configure/xorg-server index b66600258..943797bfd 100644 --- a/source/x/x11/configure/xorg-server +++ b/source/x/x11/configure/xorg-server @@ -7,7 +7,7 @@ BUILD_SERVERS="--enable-xorg \ --enable-xsdl \ --enable-xfbdev" -MESA_VERSION=${MESA_VERSION:-7.5} +MESA_VERSION=${MESA_VERSION:-7.5} # unused in 1.7.x # Default font paths to be used by the X server DEF_FONTPATH="/usr/share/fonts/local,/usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/CID,/usr/share/fonts/75dpi/:unscaled,/usr/share/fonts/100dpi/:unscaled,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/cyrillic" @@ -26,9 +26,8 @@ CFLAGS="$SLKCFLAGS" \ --with-default-font-path="${DEF_FONTPATH}" \ --with-module-dir=/usr/lib${LIBDIRSUFFIX}/xorg/modules \ --with-dri-driver-path=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \ - --with-os-name="Slackware 13.0" \ + --with-os-name="Slackware 13.1" \ --with-os-vendor="Slackware Linux Project" \ - --with-mesa-source=/tmp/Mesa-${MESA_VERSION} \ --with-xkb-path=/etc/X11/xkb \ --with-xkb-output=/var/lib/xkb \ $BUILD_SERVERS \ diff --git a/source/x/x11/modularize b/source/x/x11/modularize index fd192efba..d915fd212 100644 --- a/source/x/x11/modularize +++ b/source/x/x11/modularize @@ -67,7 +67,6 @@ imake inputproto intel-gpu-tools kbproto -lbxproxy libAppleWM libFS libICE @@ -107,7 +106,6 @@ libXxf86misc libXxf86vm libdmx libfontenc -liblbxutil libpciaccess libpthread-stubs libxcb @@ -198,6 +196,7 @@ xf86-input-tek4957 xf86-input-ur98 xf86-input-vmmouse xf86-input-void +xf86-input-wacom xf86-video-geode xf86-video-apm xf86-video-ark diff --git a/source/x/x11/patch/compiz.patch b/source/x/x11/patch/compiz.patch deleted file mode 100644 index c2920994d..000000000 --- a/source/x/x11/patch/compiz.patch +++ /dev/null @@ -1,3 +0,0 @@ -zcat $CWD/patch/compiz/compiz-0.7.8-kde42-crash.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patch/compiz/compiz-0.7.8-kde42-krunner.patch.gz | patch -p1 --verbose || exit 1 -zcat $CWD/patch/compiz/compiz-0.7.8-kde42.patch.gz | patch -p1 --verbose || exit 1 diff --git a/source/x/x11/patch/compiz/compiz-0.7.8-kde42-crash.patch b/source/x/x11/patch/compiz/compiz-0.7.8-kde42-crash.patch deleted file mode 100644 index 00f89e2cd..000000000 --- a/source/x/x11/patch/compiz/compiz-0.7.8-kde42-crash.patch +++ /dev/null @@ -1,66 +0,0 @@ -Implement KDecorationBridge unstable API, needed for KDE 4.2. ---- - -diff --git a/kde/window-decorator-kde4/window.cpp b/kde/window-decorator-kde4/window.cpp -index d2d362b..68c856b 100644 ---- a/kde/window-decorator-kde4/window.cpp -+++ b/kde/window-decorator-kde4/window.cpp -@@ -764,6 +764,31 @@ KWD::Window::grabXServer (bool) - } - - void -+KWD::Window::repaintShadow (void) -+{ -+} -+ -+bool -+KWD::Window::compositingActive (void) const -+{ -+ return true; -+} -+ -+bool -+KWD::Window::shadowsActive (void) const -+{ -+ /* we are drawing the shadows ourselves, no need for the -+ decoration engine to do so */ -+ return false; -+} -+ -+double -+KWD::Window::opacity (void) const -+{ -+ return 1.0; -+} -+ -+void - KWD::Window::createDecoration (void) - { - KDecoration *decor; -diff --git a/kde/window-decorator-kde4/window.h b/kde/window-decorator-kde4/window.h -index bdf2c47..034e6fe 100644 ---- a/kde/window-decorator-kde4/window.h -+++ b/kde/window-decorator-kde4/window.h -@@ -45,7 +45,7 @@ class QMenu; - - namespace KWD - { --class Window:public QWidget, public KDecorationBridge { -+class Window:public QWidget, public KDecorationBridgeUnstable { - Q_OBJECT public: - - enum Type -@@ -104,6 +104,12 @@ class Window:public QWidget, public KDecorationBridge { - virtual Qt::WFlags initialWFlags (void) const; - virtual void grabXServer (bool grab); - -+ /* unstable API */ -+ virtual void repaintShadow (); -+ virtual bool compositingActive () const; -+ virtual bool shadowsActive () const; -+ virtual double opacity () const; -+ - void handleActiveChange (void); - void updateFrame (WId frame); - void updateWindowGeometry (void); - diff --git a/source/x/x11/patch/compiz/compiz-0.7.8-kde42-krunner.patch b/source/x/x11/patch/compiz/compiz-0.7.8-kde42-krunner.patch deleted file mode 100644 index 3de71af82..000000000 --- a/source/x/x11/patch/compiz/compiz-0.7.8-kde42-krunner.patch +++ /dev/null @@ -1,19 +0,0 @@ -diff --git a/kde/window-decorator-kde4/decorator.cpp b/kde/window-decorator-kde4/decorator.cpp -index 96b818d..0bf4718 100644 ---- a/kde/window-decorator-kde4/decorator.cpp -+++ b/kde/window-decorator-kde4/decorator.cpp -@@ -649,9 +649,10 @@ KWD::Decorator::x11EventFilter (XEvent *xevent) - } - else if (action == Atoms::toolkitActionRunDialogAtom) - { -- QDBusInterface krunner ("org.kde.krunner", "/Interface", -- "org.kde.krunner.Interface"); -- krunner.call ("display", ""); -+ QDBusInterface krunner ("org.kde.krunner", "/App", -+ "org.kde.krunner.App"); -+ if (krunner.isValid ()) -+ krunner.call ("display"); - } - else if (action == Atoms::toolkitActionForceQuitDialogAtom) - { - diff --git a/source/x/x11/patch/compiz/compiz-0.7.8-kde42.patch b/source/x/x11/patch/compiz/compiz-0.7.8-kde42.patch deleted file mode 100644 index 0f9962233..000000000 --- a/source/x/x11/patch/compiz/compiz-0.7.8-kde42.patch +++ /dev/null @@ -1,89 +0,0 @@ -diff -ur compiz-0.7.8/configure compiz-0.7.8-kde42/configure ---- compiz-0.7.8/configure 2008-09-17 13:34:28.000000000 +0200 -+++ compiz-0.7.8-kde42/configure 2008-12-01 19:07:49.000000000 +0100 -@@ -25429,7 +25429,7 @@ - kde4libs=`kde4-config --install lib --expandvars 2>/dev/null` - kde4incs=`kde4-config --install include --expandvars 2>/dev/null` - -- kde4_test_includes="kdecoration.h kcommondecoration.h kdecorationbridge.h plasma/panelsvg.h" -+ kde4_test_includes="kdecoration.h kcommondecoration.h kdecorationbridge.h plasma/framesvg.h" - - { echo "$as_me:$LINENO: checking for KWin headers" >&5 - echo $ECHO_N "checking for KWin headers... $ECHO_C" >&6; } -diff -ur compiz-0.7.8/configure.ac compiz-0.7.8-kde42/configure.ac ---- compiz-0.7.8/configure.ac 2008-09-17 13:33:40.000000000 +0200 -+++ compiz-0.7.8-kde42/configure.ac 2008-12-01 19:07:33.000000000 +0100 -@@ -487,7 +487,7 @@ - kde4libs=`kde4-config --install lib --expandvars 2>/dev/null` - kde4incs=`kde4-config --install include --expandvars 2>/dev/null` - -- kde4_test_includes="kdecoration.h kcommondecoration.h kdecorationbridge.h plasma/panelsvg.h" -+ kde4_test_includes="kdecoration.h kcommondecoration.h kdecorationbridge.h plasma/framesvg.h" - - dnl Check for KWin headers - AC_MSG_CHECKING([for KWin headers]) -diff -ur compiz-0.7.8/kde/window-decorator-kde4/switcher.cpp compiz-0.7.8-kde42/kde/window-decorator-kde4/switcher.cpp ---- compiz-0.7.8/kde/window-decorator-kde4/switcher.cpp 2008-08-08 13:20:31.000000000 +0200 -+++ compiz-0.7.8-kde42/kde/window-decorator-kde4/switcher.cpp 2008-12-01 19:13:18.000000000 +0100 -@@ -30,7 +30,7 @@ - - #include <fixx11h.h> - --#include <KDE/Plasma/PanelSvg> -+#include <KDE/Plasma/FrameSvg> - #include <KDE/Plasma/Theme> - - #include <kwindowsystem.h> -@@ -46,9 +46,9 @@ - QColor color; - color = Plasma::Theme::defaultTheme ()->color (Plasma::Theme::TextColor); - -- mBackground = new Plasma::PanelSvg(); -+ mBackground = new Plasma::FrameSvg(); - mBackground->setImagePath ("dialogs/background"); -- mBackground->setEnabledBorders(Plasma::PanelSvg::AllBorders); -+ mBackground->setEnabledBorders(Plasma::FrameSvg::AllBorders); - - mBorder.left = mBackground->marginSize(Plasma::LeftMargin); - mBorder.right = mBackground->marginSize(Plasma::RightMargin); -@@ -131,8 +131,8 @@ - p.setCompositionMode (QPainter::CompositionMode_Source); - p.setRenderHint (QPainter::SmoothPixmapTransform); - -- mBackground->resizePanel (QSizeF (contentWidth, contentHeight)); -- mBackground->paintPanel (&p, QRect (0, 0, contentWidth, -+ mBackground->resizeFrame (QSizeF (contentWidth, contentHeight)); -+ mBackground->paintFrame (&p, QRect (0, 0, contentWidth, - contentHeight)); - - mBackgroundPixmap = mPixmap.copy (mBorder.left, mBorder.top, -@@ -168,7 +168,7 @@ - p.setCompositionMode (QPainter::CompositionMode_Source); - - -- mBackground->paintPanel (&p, QRect (mBorder.left, mBorder.top + -+ mBackground->paintFrame (&p, QRect (mBorder.left, mBorder.top + - mGeometry.height () + 5, mGeometry.width (), - fm.height ())); - -diff -ur compiz-0.7.8/kde/window-decorator-kde4/switcher.h compiz-0.7.8-kde42/kde/window-decorator-kde4/switcher.h ---- compiz-0.7.8/kde/window-decorator-kde4/switcher.h 2008-08-08 13:20:31.000000000 +0200 -+++ compiz-0.7.8-kde42/kde/window-decorator-kde4/switcher.h 2008-12-01 19:28:37.000000000 +0100 -@@ -30,7 +30,7 @@ - - namespace Plasma - { --class PanelSvg; -+class FrameSvg; - } - - class QSpacerItem; -@@ -70,7 +70,7 @@ - - QRect mGeometry; - -- Plasma::PanelSvg *mBackground; -+ Plasma::FrameSvg *mBackground; - QPixmap mPixmap; - QPixmap mBackgroundPixmap; - diff --git a/source/x/x11/patch/xcursorgen.patch b/source/x/x11/patch/xcursorgen.patch new file mode 100644 index 000000000..5aa46dee5 --- /dev/null +++ b/source/x/x11/patch/xcursorgen.patch @@ -0,0 +1 @@ +zcat $CWD/patch/xcursorgen/xcursorgen.png14.configure.kludge.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/x/x11/patch/xcursorgen/xcursorgen.png14.configure.kludge.diff b/source/x/x11/patch/xcursorgen/xcursorgen.png14.configure.kludge.diff new file mode 100644 index 000000000..ad7ae105c --- /dev/null +++ b/source/x/x11/patch/xcursorgen/xcursorgen.png14.configure.kludge.diff @@ -0,0 +1,61 @@ +--- ./configure.orig 2009-10-16 19:42:25.000000000 -0500 ++++ ./configure 2010-02-21 13:57:53.000000000 -0600 +@@ -5043,12 +5043,12 @@ + pkg_cv_XCURSORGEN_CFLAGS="$XCURSORGEN_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xcursor libpng12\"") >&5 +- ($PKG_CONFIG --exists --print-errors "x11 xcursor libpng12") 2>&5 ++ { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xcursor libpng14\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "x11 xcursor libpng14") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- pkg_cv_XCURSORGEN_CFLAGS=`$PKG_CONFIG --cflags "x11 xcursor libpng12" 2>/dev/null` ++ pkg_cv_XCURSORGEN_CFLAGS=`$PKG_CONFIG --cflags "x11 xcursor libpng14" 2>/dev/null` + else + pkg_failed=yes + fi +@@ -5059,12 +5059,12 @@ + pkg_cv_XCURSORGEN_LIBS="$XCURSORGEN_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xcursor libpng12\"") >&5 +- ($PKG_CONFIG --exists --print-errors "x11 xcursor libpng12") 2>&5 ++ { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xcursor libpng14\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "x11 xcursor libpng14") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- pkg_cv_XCURSORGEN_LIBS=`$PKG_CONFIG --libs "x11 xcursor libpng12" 2>/dev/null` ++ pkg_cv_XCURSORGEN_LIBS=`$PKG_CONFIG --libs "x11 xcursor libpng14" 2>/dev/null` + else + pkg_failed=yes + fi +@@ -5082,14 +5082,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- XCURSORGEN_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "x11 xcursor libpng12" 2>&1` ++ XCURSORGEN_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "x11 xcursor libpng14" 2>&1` + else +- XCURSORGEN_PKG_ERRORS=`$PKG_CONFIG --print-errors "x11 xcursor libpng12" 2>&1` ++ XCURSORGEN_PKG_ERRORS=`$PKG_CONFIG --print-errors "x11 xcursor libpng14" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$XCURSORGEN_PKG_ERRORS" >&5 + +- { { $as_echo "$as_me:$LINENO: error: Package requirements (x11 xcursor libpng12) were not met: ++ { { $as_echo "$as_me:$LINENO: error: Package requirements (x11 xcursor libpng14) were not met: + + $XCURSORGEN_PKG_ERRORS + +@@ -5100,7 +5100,7 @@ + and XCURSORGEN_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-$as_echo "$as_me: error: Package requirements (x11 xcursor libpng12) were not met: ++$as_echo "$as_me: error: Package requirements (x11 xcursor libpng14) were not met: + + $XCURSORGEN_PKG_ERRORS + diff --git a/source/x/x11/patch/xf86-input-synaptics.patch b/source/x/x11/patch/xf86-input-synaptics.patch new file mode 100644 index 000000000..f41034c37 --- /dev/null +++ b/source/x/x11/patch/xf86-input-synaptics.patch @@ -0,0 +1,4 @@ +# Enable tap-to-click out of the box, closing one of the +# most reported bugs of the last 2 years or so. +# Thanks to Piter Punk for figuring out the proper fix! +zcat $CWD/patch/xf86-input-synaptics/xf86-input-synaptics.tap-to-click.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/x/x11/patch/xf86-input-synaptics/xf86-input-synaptics.tap-to-click.diff b/source/x/x11/patch/xf86-input-synaptics/xf86-input-synaptics.tap-to-click.diff new file mode 100644 index 000000000..2fdf4e0d1 --- /dev/null +++ b/source/x/x11/patch/xf86-input-synaptics/xf86-input-synaptics.tap-to-click.diff @@ -0,0 +1,11 @@ +--- ./fdi/11-x11-synaptics.fdi.orig 2009-10-11 18:11:21.000000000 -0500 ++++ ./fdi/11-x11-synaptics.fdi 2010-04-24 12:59:37.000000000 -0500 +@@ -3,6 +3,8 @@ + <device> + <match key="info.capabilities" contains="input.touchpad"> + <merge key="input.x11_driver" type="string">synaptics</merge> ++ <!-- Enable tap click by default: --> ++ <merge key="input.x11_options.TapButton1" type="string">1</merge> + <!-- Arbitrary options can be passed to the driver using + the input.x11_options property since xorg-server-1.5. --> + <!-- EXAMPLES: diff --git a/source/x/x11/patch/xorg-server.patch b/source/x/x11/patch/xorg-server.patch index 41aa4270d..16cf61e36 100644 --- a/source/x/x11/patch/xorg-server.patch +++ b/source/x/x11/patch/xorg-server.patch @@ -1 +1,2 @@ zcat $CWD/patch/xorg-server/x11.startwithblackscreen.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff b/source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff new file mode 100644 index 000000000..f8abdccb2 --- /dev/null +++ b/source/x/x11/patch/xorg-server/xorg-server.fb.fbpict.c.mod.diff @@ -0,0 +1,11 @@ +--- ./fb/fbpict.c.orig 2010-03-11 22:38:21.000000000 -0600 ++++ ./fb/fbpict.c 2010-04-29 14:14:52.000000000 -0500 +@@ -37,7 +37,7 @@ + #include "mipict.h" + #include "fbpict.h" + +-#define mod(a,b) ((b) == 1 ? 0 : (a) >= 0 ? (a) % (b) : (b) - (-a) % (b)) ++#define mod(a,b) ((b) == 1 ? 0 : (a) >= 0 ? (a) % (b) : (b) - (-(a)) % (b)) + + void + fbWalkCompositeRegion (CARD8 op, diff --git a/source/x/x11/patch/xscope.patch b/source/x/x11/patch/xscope.patch deleted file mode 100644 index a41588a0b..000000000 --- a/source/x/x11/patch/xscope.patch +++ /dev/null @@ -1 +0,0 @@ -zcat $CWD/patch/xscope/xscope-1.1-scope.c.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/x/x11/patch/xscope/xscope-1.1-scope.c.diff b/source/x/x11/patch/xscope/xscope-1.1-scope.c.diff deleted file mode 100644 index 2c01dbac2..000000000 --- a/source/x/x11/patch/xscope/xscope-1.1-scope.c.diff +++ /dev/null @@ -1,11 +0,0 @@ -diff -Nur xscope-1.1.orig/scope.c xscope-1.1/scope.c ---- xscope-1.1.orig/scope.c 2008-09-22 21:18:16.000000000 -0500 -+++ xscope-1.1/scope.c 2009-04-08 23:54:12.230818270 -0500 -@@ -58,6 +58,7 @@ - #include <errno.h> - #include <unistd.h> - #include <netdb.h> -+#include <linux/param.h> - - #ifdef SYSV - #define bzero(s,l) memset(s, 0, l) diff --git a/source/x/x11/post-install/twm/xinitrc.twm b/source/x/x11/post-install/twm/xinitrc.twm index 1bb5185e6..fb97e2e27 100644 --- a/source/x/x11/post-install/twm/xinitrc.twm +++ b/source/x/x11/post-install/twm/xinitrc.twm @@ -3,8 +3,8 @@ userresources=$HOME/.Xresources usermodmap=$HOME/.Xmodmap -sysresources=/usr/lib/X11/xinit/.Xresources -sysmodmap=/usr/lib/X11/xinit/.Xmodmap +sysresources=/etc/X11/xinit/.Xresources +sysmodmap=/etc/X11/xinit/.Xmodmap # merge in defaults and keymaps diff --git a/source/x/x11/post-install/util-macros.post-install b/source/x/x11/post-install/util-macros.post-install new file mode 100644 index 000000000..b25fb344b --- /dev/null +++ b/source/x/x11/post-install/util-macros.post-install @@ -0,0 +1,2 @@ +mkdir -p $PKG/usr/lib +mv $PKG/usr/share/pkgconfig $PKG/usr/lib diff --git a/source/x/x11/post-install/xdm.post-install b/source/x/x11/post-install/xdm.post-install index 05e37163e..83dcf7889 100644 --- a/source/x/x11/post-install/xdm.post-install +++ b/source/x/x11/post-install/xdm.post-install @@ -14,3 +14,6 @@ chmod 755 $PKG/etc/X11/xdm/Xsession $PKG/etc/X11/xdm/Xsetup_0 mv Xservers Xservers.new mv Xsession Xsession.new ) +mkdir -p $PKG/var/lib/xdm +chown root:root $PKG/var/lib/xdm +chmod 755 $PKG/var/lib/xdm diff --git a/source/x/x11/post-install/xf86-input-synaptics.post-install b/source/x/x11/post-install/xf86-input-synaptics.post-install index d7de8a4e0..00250982e 100644 --- a/source/x/x11/post-install/xf86-input-synaptics.post-install +++ b/source/x/x11/post-install/xf86-input-synaptics.post-install @@ -4,6 +4,6 @@ cat fdi/11-x11-synaptics.fdi > \ mkdir -p $PKG/usr/doc/xf86-input-synaptics-$MODULAR_PACKAGE_VERSION cp -a \ - NEWS README TODO \ + README TODO \ $PKG/usr/doc/xf86-input-synaptics-$MODULAR_PACKAGE_VERSION diff --git a/source/x/x11/post-install/xf86-input-wacom.post-install b/source/x/x11/post-install/xf86-input-wacom.post-install new file mode 100644 index 000000000..226678f4d --- /dev/null +++ b/source/x/x11/post-install/xf86-input-wacom.post-install @@ -0,0 +1,4 @@ +mv $PKG/usr/share/hal/fdi/policy/20thirdparty \ + $PKG/usr/share/hal/fdi/policy/10osvendor +mv $PKG/usr/share/hal/fdi/policy/10osvendor/wacom.fdi \ + $PKG/usr/share/hal/fdi/policy/10osvendor/11-x11-wacom.fdi diff --git a/source/x/x11/slack-desc/xf86-input-wacom b/source/x/x11/slack-desc/xf86-input-wacom new file mode 100644 index 000000000..88f68c1d2 --- /dev/null +++ b/source/x/x11/slack-desc/xf86-input-wacom @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +xf86-input-wacom: xf86-input-wacom +xf86-input-wacom: +xf86-input-wacom: xf86-input-wacom is part of X11. +xf86-input-wacom: +xf86-input-wacom: For more information about the X.Org Foundation (the providers of the +xf86-input-wacom: X.Org implementation of the X Window System), see their website: +xf86-input-wacom: +xf86-input-wacom: http://www.x.org +xf86-input-wacom: +xf86-input-wacom: +xf86-input-wacom: diff --git a/source/x/x11/slack-desc/xf86-video-xgi b/source/x/x11/slack-desc/xf86-video-xgi new file mode 100644 index 000000000..a92ec854d --- /dev/null +++ b/source/x/x11/slack-desc/xf86-video-xgi @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +xf86-video-xgi: xf86-video-xgi +xf86-video-xgi: +xf86-video-xgi: xf86-video-xgi is part of X11. +xf86-video-xgi: +xf86-video-xgi: For more information about the X.Org Foundation (the providers of the +xf86-video-xgi: X.Org implementation of the X Window System), see their website: +xf86-video-xgi: +xf86-video-xgi: http://www.x.org +xf86-video-xgi: +xf86-video-xgi: +xf86-video-xgi: diff --git a/source/x/x11/slack-desc/xf86-video-xgixp b/source/x/x11/slack-desc/xf86-video-xgixp new file mode 100644 index 000000000..32aea9fd0 --- /dev/null +++ b/source/x/x11/slack-desc/xf86-video-xgixp @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +xf86-video-xgixp: xf86-video-xgixp +xf86-video-xgixp: +xf86-video-xgixp: xf86-video-xgixp is part of X11. +xf86-video-xgixp: +xf86-video-xgixp: For more information about the X.Org Foundation (the providers of the +xf86-video-xgixp: X.Org implementation of the X Window System), see their website: +xf86-video-xgixp: +xf86-video-xgixp: http://www.x.org +xf86-video-xgixp: +xf86-video-xgixp: +xf86-video-xgixp: diff --git a/source/x/x11/x11.SlackBuild b/source/x/x11/x11.SlackBuild index e47537981..ca7297082 100755 --- a/source/x/x11/x11.SlackBuild +++ b/source/x/x11/x11.SlackBuild @@ -1,5 +1,5 @@ #!/bin/sh -# Copyright 2007-2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2007-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -51,13 +51,21 @@ pkgbase() { CWD=$(pwd) TMP=${TMP:-/tmp} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + # A lot of this stuff just controls the package names this time: -VERSION=${VERSION:-7.4} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-7.5} BUILD=${BUILD:-1} - PKGARCH=$ARCH +NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" @@ -155,6 +163,10 @@ mkdir -p $SLACK_X_BUILD_DIR else continue fi + else + echo + echo "Building from source ${x_pkg}" + echo fi if grep -wq "^$PKGNAME" ${CWD}/modularize ; then # Set $PKG to a private dir for the modular package build: @@ -194,6 +206,23 @@ mkdir -p $SLACK_X_BUILD_DIR fi make install DESTDIR=$PKG + + mkdir -p $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION} + cp -a \ + AUTHORS* COPYING* INSTALL* README* NEWS* TODO* \ + $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION} + + # If there's a ChangeLog, installing at least part of the recent history + # is useful, but don't let it get totally out of control: + if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog + fi + + # Get rid of zero-length junk files: + find $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION -type f -size 0 -exec rm --verbose "{}" \; + rmdir --verbose $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION 2> /dev/null # Strip binaries: ( cd $PKG diff --git a/source/x/xdg-utils/xdg-utils.SlackBuild b/source/x/xdg-utils/xdg-utils.SlackBuild index dcf1c5c2d..630746e05 100755 --- a/source/x/xdg-utils/xdg-utils.SlackBuild +++ b/source/x/xdg-utils/xdg-utils.SlackBuild @@ -4,7 +4,7 @@ # Written by Erik Hanson erik@slackbuilds.org # Modified for CVS version by Patrick Volkerding <volkerdi@slackware.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -27,9 +27,9 @@ PRGNAM=xdg-utils VERSION=1.0.2 -CVS=20090202cvs +CVS=20100506cvs ARCH=noarch -BUILD=${BUILD:-3} +BUILD=${BUILD:-4} NUMJOBS=${NUMJOBS:-" -j7 "} diff --git a/source/x/xf86-video-nouveau/this_is_NOT_a_driver.txt b/source/x/xf86-video-nouveau/this_is_NOT_a_driver.txt new file mode 100644 index 000000000..ea6e0e485 --- /dev/null +++ b/source/x/xf86-video-nouveau/this_is_NOT_a_driver.txt @@ -0,0 +1,14 @@ + +This is not the experimental nouveau driver for nVidia cards. + +It is a stub package that installs /etc/modprobe.d/nouveau-blacklist.conf, +to prevent the nouveau dri module shipped with our kernel from preventing +the nv driver and/or the binary nVidia driver from working. + +If you want to use nouveau, remove this package. + +Sorry if it interferes with anyone's xf86-video-nouveau package that they +didn't get from us, but this seems like the best default. When a real +xf86-video-nouveau package appears someday, installing it will remove +the module blacklist file. + diff --git a/source/x/xterm/xterm.SlackBuild b/source/x/xterm/xterm.SlackBuild index 8f1607cbb..863ccae40 100755 --- a/source/x/xterm/xterm.SlackBuild +++ b/source/x/xterm/xterm.SlackBuild @@ -1,5 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA + +# Copyright 2006-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +22,21 @@ PKGNAM=xterm -VERSION=${VERSION:-243} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} @@ -37,6 +47,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG diff --git a/source/xap/MPlayer/MPlayer.SlackBuild b/source/xap/MPlayer/MPlayer.SlackBuild index 20b947417..0ce4b79ed 100755 --- a/source/xap/MPlayer/MPlayer.SlackBuild +++ b/source/xap/MPlayer/MPlayer.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2006, 2007, 2008, 2009 Eric Hameleers, Eindhoven, NL -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Permission to use, copy, modify, and distribute this software for @@ -32,12 +32,21 @@ # ----------------------------------------------------------------------------- PRGNAM=MPlayer -VERSION=${VERSION:-r29390} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-20100218} BUILD=${BUILD:-1} TAG=${TAG:-} -DOCS="AUTHORS Changelog Copyright LICENSE README DOCS/HTML-single DOCS/tech" +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +DOCS="AUTHORS Changelog Copyright LICENSE README DOCS/HTML DOCS/tech" DEFSKIN=${DEFSKIN:-"Blue"} # Download more skins at the following url: SKINVER=${SKINVER:-"1.7"} # http://www.mplayerhq.hu/design7/dload.html @@ -135,6 +144,7 @@ src_checkout() { mkdir MPlayer-${VERSION} \ && cd MPlayer-${VERSION} \ && svn checkout --revision $REV svn://svn.mplayerhq.hu/mplayer/trunk . \ + && svn propget svn:externals | sed -e 's/[[:space:]].*$//g' | xargs svn up --revision $REV \ && find . -type d -name '.svn' -depth | xargs rm -rf \ && ([ "$USE_PATENTS" != "YES" ] && rm -rf libdvdcss || true) \ && chown -R root:root . \ @@ -247,7 +257,8 @@ if [ "$USE_PATENTS" != "YES" ]; then DO_PATENTED="--disable-libdvdcss-internal \ --disable-mp3lame --disable-mp3lame-lavc \ --disable-faac --disable-faac-lavc \ - --disable-libamr_nb --disable-libamr_wb" + --disable-libopencore_amrnb \ + --disable-libopencore_amrwb" else DO_PATENTED="" fi @@ -345,7 +356,7 @@ EOINS mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true cp -a $SRCDIR/$(basename $0) $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild -mv $PKG/usr/doc/$PRGNAM-$VERSION/HTML-single $PKG/usr/doc/$PRGNAM-$VERSION/html +#mv $PKG/usr/doc/$PRGNAM-$VERSION/HTML-single $PKG/usr/doc/$PRGNAM-$VERSION/html # Save a sample of all configuration files: for i in etc/*.conf ; do cp $i $PKG/usr/doc/$PRGNAM-$VERSION/$(basename $i)-sample diff --git a/source/xap/audacious-plugins/amidi-plug.fix-drct.diff b/source/xap/audacious-plugins/amidi-plug.fix-drct.diff deleted file mode 100644 index 432b955d7..000000000 --- a/source/xap/audacious-plugins/amidi-plug.fix-drct.diff +++ /dev/null @@ -1,11 +0,0 @@ -diff -ur ./src/amidi-plug/i_configure.c ../audacious-plugins-1.5.1/src/amidi-plug/i_configure.c ---- ./src/amidi-plug/i_configure.c 2008-05-24 00:44:19.000000000 +0200 -+++ ./src/amidi-plug/i_configure.c 2008-11-13 15:08:57.000000000 +0100 -@@ -28,6 +28,7 @@ - #include "i_configure-fluidsynth.h" - #include "i_configure-dummy.h" - #include "i_utils.h" -+#include <audacious/plugin.h> - #include <audacious/auddrct.h> - - diff --git a/source/xap/audacious-plugins/audacious-plugins.SlackBuild b/source/xap/audacious-plugins/audacious-plugins.SlackBuild index 47bc40f9f..84417ccbc 100755 --- a/source/xap/audacious-plugins/audacious-plugins.SlackBuild +++ b/source/xap/audacious-plugins/audacious-plugins.SlackBuild @@ -22,18 +22,24 @@ PKGNAM=audacious-plugins -VERSION=${VERSION:-1.5.1} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +VERSION=${VERSION:-2.3} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -47,16 +53,19 @@ elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="64" ARCHOPTS="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + ARCHOPTS="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1 cd ${PKGNAM}-$VERSION || exit 1 -zcat $CWD/audacious-plugins.libmtp8.diff.gz | patch -p1 || exit 1 -zcat $CWD/amidi-plug.fix-drct.diff.gz | patch -p1 || exit 1 - # Make sure ownerships and permissions are sane: chown -R root:root . find . \ @@ -75,7 +84,6 @@ CXXFLAGS="$SLKCFLAGS" \ --mandir=/usr/man \ --enable-chardet \ --enable-amidiplug \ - --enable-timidity \ --disable-altivec \ --program-prefix= \ --program-suffix= \ @@ -116,11 +124,10 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING INSTALL Mercurial-Access \ + AUTHORS COPYING INSTALL Mercurial-Access README* \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install -#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG diff --git a/source/xap/audacious-plugins/audacious-plugins.libmtp8.diff b/source/xap/audacious-plugins/audacious-plugins.libmtp8.diff deleted file mode 100644 index 6c224fa5d..000000000 --- a/source/xap/audacious-plugins/audacious-plugins.libmtp8.diff +++ /dev/null @@ -1,16 +0,0 @@ ---- ./src/mtp_up/mtp.c.orig 2008-05-23 17:44:20.000000000 -0500 -+++ ./src/mtp_up/mtp.c 2008-09-14 14:28:44.000000000 -0500 -@@ -193,11 +193,12 @@ - g_free(from_path);
- g_free(tmp);
- parent_id = mtp_device->default_music_folder;
-+ gentrack->parent_id = parent_id;
-
- #if DEBUG
- g_print("Uploading track '%s'\n",filename);
- #endif
-- ret = LIBMTP_Send_Track_From_File(mtp_device, filename , gentrack, NULL , NULL, parent_id);
-+ ret = LIBMTP_Send_Track_From_File(mtp_device, filename , gentrack, NULL , NULL);
- LIBMTP_destroy_track_t(gentrack);
- if (ret == 0)
- g_print("Track upload finished!\n");
diff --git a/source/xap/audacious/audacious.SlackBuild b/source/xap/audacious/audacious.SlackBuild index b18a06700..45b5c1717 100755 --- a/source/xap/audacious/audacious.SlackBuild +++ b/source/xap/audacious/audacious.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,18 +22,24 @@ PKGNAM=audacious -VERSION=${VERSION:-1.5.1} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +VERSION=${VERSION:-2.3} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -53,16 +59,18 @@ elif [ "$ARCH" = "arm" ]; then elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1 cd ${PKGNAM}-$VERSION || exit 1 -# Fix command line options handling: -zcat $CWD/audacious.handle_cmd_line_options.diff.gz | patch -p1 || exit 1 - # Make sure ownerships and permissions are sane: chown -R root:root . find . \ @@ -78,8 +86,7 @@ CFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ --mandir=/usr/man \ - --enable-ipv6 \ - --enable-chardet \ + --docdir=/usr/doc/${PKGNAM}-$VERSION \ --disable-altivec \ --program-prefix= \ --program-suffix= \ @@ -90,6 +97,13 @@ CFLAGS="$SLKCFLAGS" \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +# Fix broken symlinks pointing into the build directory +( cd $PKG/usr/bin + rm -f audacious audtool + ln -s audacious2 audacious + ln -s audtool2 audtool +) + # Strip binaries: find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -120,11 +134,11 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - ABOUT-NLS AUTHORS COPYING INSTALL Mercurial-Access NEWS README \ + AUTHORS COPYING INSTALL Mercurial-Access NEWS README doc/* \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install -#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG diff --git a/source/xap/audacious/audacious.handle_cmd_line_options.diff b/source/xap/audacious/audacious.handle_cmd_line_options.diff deleted file mode 100644 index 6ccb22433..000000000 --- a/source/xap/audacious/audacious.handle_cmd_line_options.diff +++ /dev/null @@ -1,38 +0,0 @@ ---- ./src/audacious/main.c.orig 2008-05-23 17:00:34.000000000 -0500 -+++ ./src/audacious/main.c 2009-04-10 17:03:00.000000000 -0500 -@@ -315,7 +315,7 @@ - } - - static void --handle_cmd_line_options() -+handle_cmd_line_options(gboolean skip) - { - gchar **filenames = options.filenames; - #ifdef USE_DBUS -@@ -430,7 +430,7 @@ - } /* is_running */ - else - #endif -- { /* !is_running */ -+ if (!skip) { /* !is_running */ - if (filenames != NULL) - { - gint pos = 0; -@@ -715,7 +715,7 @@ - - signal_handlers_init(); - -- handle_cmd_line_options(); -+ handle_cmd_line_options(TRUE); - - if (options.headless == FALSE) - { -@@ -735,6 +735,8 @@ - plugin_system_init(); - playlist_system_init(); - -+ handle_cmd_line_options(FALSE); -+ - #ifdef USE_DBUS - init_dbus(); - #endif diff --git a/source/xap/audacious/doinst.sh b/source/xap/audacious/doinst.sh new file mode 100644 index 000000000..4e8ba7071 --- /dev/null +++ b/source/xap/audacious/doinst.sh @@ -0,0 +1,4 @@ +if [ -x /usr/bin/update-desktop-database ]; then + /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1 +fi + diff --git a/source/xap/blackbox/blackbox-0.70.1-gcc-4.3.patch b/source/xap/blackbox/blackbox-0.70.1-gcc-4.3.patch new file mode 100644 index 000000000..480b99e85 --- /dev/null +++ b/source/xap/blackbox/blackbox-0.70.1-gcc-4.3.patch @@ -0,0 +1,109 @@ +http://mirrors.usc.edu/pub/linux/distributions/gentoo/x11-wm/blackbox/files/blackbox-0.70.1-gcc-4.3.patch + + +diff -Naupr blackbox-0.70.1.orig/lib/Image.cc blackbox-0.70.1/lib/Image.cc +--- blackbox-0.70.1.orig/lib/Image.cc 2005-04-08 17:41:09.000000000 +0200 ++++ blackbox-0.70.1/lib/Image.cc 2008-02-24 08:31:28.000000000 +0100 +@@ -42,8 +42,9 @@ + + #include <assert.h> + #include <math.h> +-#include <stdio.h> +-#include <stdlib.h> ++#include <cstdio> ++#include <cstdlib> ++#include <cstring> + + // #define COLORTABLE_DEBUG + // #define MITSHM_DEBUG +diff -Naupr blackbox-0.70.1.orig/lib/Resource.cc blackbox-0.70.1/lib/Resource.cc +--- blackbox-0.70.1.orig/lib/Resource.cc 2005-04-06 23:16:50.000000000 +0200 ++++ blackbox-0.70.1/lib/Resource.cc 2008-02-24 08:33:11.000000000 +0100 +@@ -28,7 +28,8 @@ + #include <X11/Xlib.h> + #include <X11/Xresource.h> + +-#include <stdio.h> ++#include <cstdio> ++#include <cstring> + + + bt::Resource::Resource(void) +diff -Naupr blackbox-0.70.1.orig/lib/XDG.cc blackbox-0.70.1/lib/XDG.cc +--- blackbox-0.70.1.orig/lib/XDG.cc 2005-04-06 16:04:38.000000000 +0200 ++++ blackbox-0.70.1/lib/XDG.cc 2008-02-24 08:34:11.000000000 +0100 +@@ -25,7 +25,8 @@ + #include "Util.hh" + #include "XDG.hh" + +-#include <stdlib.h> ++#include <cstdlib> ++#include <algorithm> + + + // make sure directory names end with a slash +diff -Naupr blackbox-0.70.1.orig/src/BlackboxResource.cc blackbox-0.70.1/src/BlackboxResource.cc +--- blackbox-0.70.1.orig/src/BlackboxResource.cc 2005-10-18 09:34:46.000000000 +0200 ++++ blackbox-0.70.1/src/BlackboxResource.cc 2008-02-24 08:34:49.000000000 +0100 +@@ -33,6 +33,8 @@ + #include <X11/Xutil.h> + #include <X11/cursorfont.h> + ++#include <cstring> ++ + + BlackboxResource::BlackboxResource(const std::string& rc): rc_file(rc) { + screen_resources = 0; +diff -Naupr blackbox-0.70.1.orig/src/main.cc blackbox-0.70.1/src/main.cc +--- blackbox-0.70.1.orig/src/main.cc 2005-01-03 10:42:57.000000000 +0100 ++++ blackbox-0.70.1/src/main.cc 2008-02-24 08:37:16.000000000 +0100 +@@ -34,7 +34,8 @@ + #include "blackbox.hh" + #include "../version.h" + +-#include <stdio.h> ++#include <cstdio> ++#include <cstring> + + + static void showHelp(int exitval) { +diff -Naupr blackbox-0.70.1.orig/src/Screen.cc blackbox-0.70.1/src/Screen.cc +--- blackbox-0.70.1.orig/src/Screen.cc 2005-10-18 10:07:22.000000000 +0200 ++++ blackbox-0.70.1/src/Screen.cc 2008-02-24 08:35:46.000000000 +0100 +@@ -45,8 +45,9 @@ + #include <sys/types.h> + #include <sys/stat.h> + #include <assert.h> +-#include <ctype.h> + #include <dirent.h> ++#include <cctype> ++#include <cstring> + + + static bool running = true; +diff -Naupr blackbox-0.70.1.orig/src/ScreenResource.cc blackbox-0.70.1/src/ScreenResource.cc +--- blackbox-0.70.1.orig/src/ScreenResource.cc 2005-04-13 07:54:08.000000000 +0200 ++++ blackbox-0.70.1/src/ScreenResource.cc 2008-02-24 08:36:31.000000000 +0100 +@@ -33,6 +33,8 @@ + + #include <assert.h> + ++#include <cstring> ++ + + static const int iconify_width = 9; + static const int iconify_height = 9; +diff -Naupr blackbox-0.70.1.orig/util/bsetroot.cc blackbox-0.70.1/util/bsetroot.cc +--- blackbox-0.70.1.orig/util/bsetroot.cc 2005-03-15 08:01:37.000000000 +0100 ++++ blackbox-0.70.1/util/bsetroot.cc 2008-02-24 08:38:41.000000000 +0100 +@@ -30,7 +30,9 @@ + #include <cctype> + + #include <X11/Xatom.h> +-#include <stdio.h> ++#include <cstdio> ++#include <cstdlib> ++#include <cstring> + + + // ignore all X errors diff --git a/source/xap/blackbox/blackbox.SlackBuild b/source/xap/blackbox/blackbox.SlackBuild index 4505d06e3..130355f4b 100755 --- a/source/xap/blackbox/blackbox.SlackBuild +++ b/source/xap/blackbox/blackbox.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,23 +20,48 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# http://downloads.sourceforge.net/project/blackboxwm/blackboxwm/Blackbox%200.70.1/blackbox-0.70.1.tar.bz2 +# http://downloads.sourceforge.net/project/bbkeys/bbkeys/0.9.1/bbkeys-0.9.1.tar.gz PKGNAM=blackbox -VERSION=${VERSION:-0.65.0} -BBVER=${BBVER:-0.8.6} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} - +VERSION=${VERSION:-0.70.1} +BBKEYSVER=${BBKEYSVER:-0.9.1} +BUILD=${BUILD:-3} NUMJOBS=${NUMJOBS:-" -j7 "} +PKGEXT=${PKGEXT:-txz} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi +# Determine the CFLAGS for the known architectures: +case $ARCH in + i486) export SLKCFLAGS="-O2 -march=i486 -mtune=i686" + export LIBDIRSUFFIX="" + export ARCHQUADLET="" ;; + i686) export SLKCFLAGS="-O2 -march=i686 -mtune=i686" + export LIBDIRSUFFIX="" + export ARCHQUADLET="" ;; + x86_64) export SLKCFLAGS="-O2 -fPIC" + export LIBDIRSUFFIX="64" + export ARCHQUADLET="" ;; + s390) export SLKCFLAGS="-O2" + export LIBDIRSUFFIX="" + export ARCHQUADLET="" ;; + arm) export SLKCFLAGS="-O2 -march=armv4t" + export LIBDIRSUFFIX="" + export ARCHQUADLET="-gnueabi" ;; + *) export SLKCFLAGS="-O2" + export LIBDIRSUFFIX="" + export ARCHQUADLET="" ;; +esac -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" -fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -46,7 +71,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.gz || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1 cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: @@ -57,24 +82,33 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Thanks for the gcc-4.1.1 patch, Debian. :-) -zcat $CWD/blackbox_0.65.0-5.diff.gz | patch -p1 --verbose || exit 1 +# Build fix for gcc-4: +zcat $CWD/blackbox-0.70.1-gcc-4.3.patch.gz | patch --verbose -p1 || exit 1 # Configure: CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ --enable-shape \ --enable-slit \ --enable-interlace \ --enable-nls \ + --enable-shared=yes \ + --enable-static=no \ --enable-timed-cache \ - $ARCH-slackware-linux + --infodir=/usr/info \ + --mandir=/usr/man \ + --build=$ARCH-slackware-linux$ARCHQUADLET || exit 1 -# Build and install: +# Build: make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 +# Install onto filesystem - needed for bbkeys to find libbt: +make install || exit 1 + +# Install into package: +make install DESTDIR=$PKG || exit 1 mkdir -p $PKG/etc/X11/xinit zcat $CWD/xinitrc.blackbox.gz > $PKG/etc/X11/xinit/xinitrc.blackbox chmod 755 $PKG/etc/X11/xinit/xinitrc.blackbox @@ -85,12 +119,20 @@ cp -a \ AUTHORS INSTALL LICENSE README* TODO \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + ###################################### # Compile bbkeys program for blackbox: cd $TMP -rm -rf bbkeys-${BBVER} -tar xvf $CWD/bbkeys-${BBVER}.tar.gz || exit 1 -cd bbkeys-${BBVER} || exit 1 +rm -rf bbkeys-${BBKEYSVER} +tar xvf $CWD/bbkeys-${BBKEYSVER}.tar.xz +cd bbkeys-${BBKEYSVER} || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . @@ -104,18 +146,27 @@ find . \ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ - --enable-interlace \ - $ARCH-slackware-linux + --infodir=/usr/info \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --docdir=/usr/doc/bbkeys-$BBKEYSVER \ + --build=$ARCH-slackware-linux$ARCHQUADLET || exit 1 + +# --docdir isn't honoured: +sed -i 's?^docdir.*=.*?docdir = /usr/doc/bbkeys-'"$BBKEYSVER"'?g' Makefile + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/bbkeys-${BBKEYSVER}) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi -# Build and install: +# Build and install into package: make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -mkdir -p /usr/doc/bbkeys-$BBKEYS -cp -a \ - AUTHORS BUGS COPYING ChangeLog INSTALL NEWS README* TODO \ - /usr/doc/bbkeys-$BBKEYS - # Strip binaries: find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -135,9 +186,12 @@ if [ -d $PKG/usr/man ]; then ) fi +# Set doc permissions: +find $PKG/usr/doc -type f -print0 | xargs -0 chmod 644 +find $PKG/usr/doc -type d -print0 | xargs -0 chmod 755 + mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc +install -vpm644 $CWD/slack-desc $PKG/install/ cd $PKG -/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz - +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.$PKGEXT diff --git a/source/xap/blackbox/blackbox_0.65.0-5.diff b/source/xap/blackbox/blackbox_0.65.0-5.diff deleted file mode 100644 index 4b6959d85..000000000 --- a/source/xap/blackbox/blackbox_0.65.0-5.diff +++ /dev/null @@ -1,12462 +0,0 @@ ---- blackbox-0.65.0.orig/Makefile.in -+++ blackbox-0.65.0/Makefile.in -@@ -68,6 +68,7 @@ - ORDEREDPSEUDO = @ORDEREDPSEUDO@ - PACKAGE = @PACKAGE@ - SHAPE = @SHAPE@ -+XINERAMA = @XINERAMA@ - TIMEDCACHE = @TIMEDCACHE@ - VERSION = @VERSION@ - gencat_cmd = @gencat_cmd@ ---- blackbox-0.65.0.orig/configure -+++ blackbox-0.65.0/configure -@@ -1,42 +1,325 @@ - #! /bin/sh -- - # Guess values for system-dependent variables and create Makefiles. --# Generated automatically using autoconf version 2.13 --# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -+# Generated by GNU Autoconf 2.59. - # -+# Copyright (C) 2003 Free Software Foundation, Inc. - # This configure script is free software; the Free Software Foundation - # gives unlimited permission to copy, distribute and modify it. -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ -+# Be Bourne compatible -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -+ set -o posix -+fi -+DUALCASE=1; export DUALCASE # for MKS sh -+ -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+$as_unset ENV MAIL MAILPATH -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME -+do -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ $as_unset $as_var -+ fi -+done -+ -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ -+ -+# Name of the executable. -+as_me=`$as_basename "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)$' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -+ /^X\/\(\/\/\)$/{ s//\1/; q; } -+ /^X\/\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` -+ -+ -+# PATH needs CR, and LINENO needs CR and PATH. -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh -+fi -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x$as_lineno_3" = "x$as_lineno_2" || { -+ # Find who we are. Look in the path if we contain no path at all -+ # relative or not. -+ case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+ -+ ;; -+ esac -+ # We did not find ourselves, most probably we were run as `sh COMMAND' -+ # in which case we are not to be found in the path. -+ if test "x$as_myself" = x; then -+ as_myself=$0 -+ fi -+ if test ! -f "$as_myself"; then -+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 -+ { (exit 1); exit 1; }; } -+ fi -+ case $CONFIG_SHELL in -+ '') -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for as_base in sh bash ksh sh5; do -+ case $as_dir in -+ /*) -+ if ("$as_dir/$as_base" -c ' -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -+ CONFIG_SHELL=$as_dir/$as_base -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$0" ${1+"$@"} -+ fi;; -+ esac -+ done -+done -+;; -+ esac -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line before each line; the second 'sed' does the real -+ # work. The second script uses 'N' to pair each line-number line -+ # with the numbered line, and appends trailing '-' during -+ # substitution so that $LINENO is not a special case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -+ sed '=' <$as_myself | -+ sed ' -+ N -+ s,$,-, -+ : loop -+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -+ t loop -+ s,-$,, -+ s,^['$as_cr_digits']*\n,, -+ ' >$as_me.lineno && -+ chmod +x $as_me.lineno || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensible to this). -+ . ./$as_me.lineno -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -+ *c*,-n*) ECHO_N= ECHO_C=' -+' ECHO_T=' ' ;; -+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ # We could just check for DJGPP; but this test a) works b) is more generic -+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -+ if test -f conf$$.exe; then -+ # Don't use ln at all; we don't have any links -+ as_ln_s='cp -p' -+ else -+ as_ln_s='ln -s' -+ fi -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.file -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+as_executable_p="test -f" -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ - --# Defaults: --ac_help= -+# IFS -+# We need space, tab and new line, in precisely that order. -+as_nl=' -+' -+IFS=" $as_nl" -+ -+# CDPATH. -+$as_unset CDPATH -+ -+ -+# Name of the host. -+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -+# so uname gets run too. -+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -+ -+exec 6>&1 -+ -+# -+# Initializations. -+# - ac_default_prefix=/usr/local --# Any additions from configure.in: --ac_help="$ac_help -- --with-x use the X Window System" --ac_help="$ac_help -- --enable-shape enable support of the XShape extension [default=yes]" --ac_help="$ac_help -- --enable-ordered-pseudo include code for ordered pseudocolor (8bpp) -- dithering [default=no]" --ac_help="$ac_help -- --enable-debug include verbose debugging code [default=no]" --ac_help="$ac_help -- --enable-nls include natural language support [default=yes]" --ac_help="$ac_help -- --enable-timed-cache use new timed pixmap cache [default=yes]" --ac_help="$ac_help -- --enable-maintainer-mode enable make rules and dependencies not useful -- (and sometimes confusing) to the casual installer" -+ac_config_libobj_dir=. -+cross_compiling=no -+subdirs= -+MFLAGS= -+MAKEFLAGS= -+SHELL=${CONFIG_SHELL-/bin/sh} -+ -+# Maximum number of lines to put in a shell here document. -+# This variable seems obsolete. It should probably be removed, and -+# only ac_max_sed_lines should be used. -+: ${ac_max_here_lines=38} -+ -+# Identity of this package. -+PACKAGE_NAME= -+PACKAGE_TARNAME= -+PACKAGE_VERSION= -+PACKAGE_STRING= -+PACKAGE_BUGREPORT= -+ -+ac_unique_file="src/blackbox.cc" -+# Factoring default headers for most tests. -+ac_includes_default="\ -+#include <stdio.h> -+#if HAVE_SYS_TYPES_H -+# include <sys/types.h> -+#endif -+#if HAVE_SYS_STAT_H -+# include <sys/stat.h> -+#endif -+#if STDC_HEADERS -+# include <stdlib.h> -+# include <stddef.h> -+#else -+# if HAVE_STDLIB_H -+# include <stdlib.h> -+# endif -+#endif -+#if HAVE_STRING_H -+# if !STDC_HEADERS && HAVE_MEMORY_H -+# include <memory.h> -+# endif -+# include <string.h> -+#endif -+#if HAVE_STRINGS_H -+# include <strings.h> -+#endif -+#if HAVE_INTTYPES_H -+# include <inttypes.h> -+#else -+# if HAVE_STDINT_H -+# include <stdint.h> -+# endif -+#endif -+#if HAVE_UNISTD_H -+# include <unistd.h> -+#endif" -+ -+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CXX CXXFLAGS ac_ct_CXX regex_cmd CPP EGREP X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS SHAPE XINERAMA ORDEREDPSEUDO DEBUG NLS gencat_cmd TIMEDCACHE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT LIBOBJS LTLIBOBJS' -+ac_subst_files='' - - # Initialize some variables set by options. -+ac_init_help= -+ac_init_version=false - # The variables have the same names as the options, with - # dashes changed to underlines. --build=NONE --cache_file=./config.cache -+cache_file=/dev/null - exec_prefix=NONE --host=NONE - no_create= --nonopt=NONE - no_recursion= - prefix=NONE - program_prefix=NONE -@@ -45,10 +328,15 @@ - silent= - site= - srcdir= --target=NONE - verbose= - x_includes=NONE - x_libraries=NONE -+ -+# Installation directory options. -+# These are left unexpanded so users can "make install exec_prefix=/foo" -+# and all the variables that are supposed to be based on exec_prefix -+# by default will actually change. -+# Use braces instead of parens because sh, perl, etc. also accept them. - bindir='${exec_prefix}/bin' - sbindir='${exec_prefix}/sbin' - libexecdir='${exec_prefix}/libexec' -@@ -62,17 +350,9 @@ - infodir='${prefix}/info' - mandir='${prefix}/man' - --# Initialize some other variables. --subdirs= --MFLAGS= MAKEFLAGS= --SHELL=${CONFIG_SHELL-/bin/sh} --# Maximum number of lines to put in a shell here document. --ac_max_here_lines=12 -- - ac_prev= - for ac_option - do -- - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" -@@ -80,59 +360,59 @@ - continue - fi - -- case "$ac_option" in -- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; -- *) ac_optarg= ;; -- esac -+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - -- case "$ac_option" in -+ case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) -- bindir="$ac_optarg" ;; -+ bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) -- ac_prev=build ;; -+ ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) -- build="$ac_optarg" ;; -+ build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) -- cache_file="$ac_optarg" ;; -+ cache_file=$ac_optarg ;; -+ -+ --config-cache | -C) -+ cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) -- datadir="$ac_optarg" ;; -+ datadir=$ac_optarg ;; - - -disable-* | --disable-*) -- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` -+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. -- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then -- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } -- fi -- ac_feature=`echo $ac_feature| sed 's/-/_/g'` -- eval "enable_${ac_feature}=no" ;; -+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/-/_/g'` -+ eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) -- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` -+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then -- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } -- fi -- ac_feature=`echo $ac_feature| sed 's/-/_/g'` -- case "$ac_option" in -- *=*) ;; -+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/-/_/g'` -+ case $ac_option in -+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac -- eval "enable_${ac_feature}='$ac_optarg'" ;; -+ eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -@@ -141,95 +421,47 @@ - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) -- exec_prefix="$ac_optarg" ;; -+ exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - -- -help | --help | --hel | --he) -- # Omit some internal or obsolete options to make the list less imposing. -- # This message is too long to be a string in the A/UX 3.1 sh. -- cat << EOF --Usage: configure [options] [host] --Options: [defaults in brackets after descriptions] --Configuration: -- --cache-file=FILE cache test results in FILE -- --help print this message -- --no-create do not create output files -- --quiet, --silent do not print \`checking...' messages -- --version print the version of autoconf that created configure --Directory and file names: -- --prefix=PREFIX install architecture-independent files in PREFIX -- [$ac_default_prefix] -- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -- [same as prefix] -- --bindir=DIR user executables in DIR [EPREFIX/bin] -- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] -- --libexecdir=DIR program executables in DIR [EPREFIX/libexec] -- --datadir=DIR read-only architecture-independent data in DIR -- [PREFIX/share] -- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] -- --sharedstatedir=DIR modifiable architecture-independent data in DIR -- [PREFIX/com] -- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] -- --libdir=DIR object code libraries in DIR [EPREFIX/lib] -- --includedir=DIR C header files in DIR [PREFIX/include] -- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] -- --infodir=DIR info documentation in DIR [PREFIX/info] -- --mandir=DIR man documentation in DIR [PREFIX/man] -- --srcdir=DIR find the sources in DIR [configure dir or ..] -- --program-prefix=PREFIX prepend PREFIX to installed program names -- --program-suffix=SUFFIX append SUFFIX to installed program names -- --program-transform-name=PROGRAM -- run sed PROGRAM on installed program names --EOF -- cat << EOF --Host type: -- --build=BUILD configure for building on BUILD [BUILD=HOST] -- --host=HOST configure for HOST [guessed] -- --target=TARGET configure for TARGET [TARGET=HOST] --Features and packages: -- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) -- --enable-FEATURE[=ARG] include FEATURE [ARG=yes] -- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] -- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) -- --x-includes=DIR X include files are in DIR -- --x-libraries=DIR X library files are in DIR --EOF -- if test -n "$ac_help"; then -- echo "--enable and --with options recognized:$ac_help" -- fi -- exit 0 ;; -+ -help | --help | --hel | --he | -h) -+ ac_init_help=long ;; -+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) -+ ac_init_help=recursive ;; -+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) -+ ac_init_help=short ;; - - -host | --host | --hos | --ho) -- ac_prev=host ;; -+ ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) -- host="$ac_optarg" ;; -+ host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) -- includedir="$ac_optarg" ;; -+ includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) -- infodir="$ac_optarg" ;; -+ infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) -- libdir="$ac_optarg" ;; -+ libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) -- libexecdir="$ac_optarg" ;; -+ libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ -@@ -238,19 +470,19 @@ - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) -- localstatedir="$ac_optarg" ;; -+ localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) -- mandir="$ac_optarg" ;; -+ mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ -- | --no-cr | --no-c) -+ | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ -@@ -264,26 +496,26 @@ - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) -- oldincludedir="$ac_optarg" ;; -+ oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) -- prefix="$ac_optarg" ;; -+ prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) -- program_prefix="$ac_optarg" ;; -+ program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) -- program_suffix="$ac_optarg" ;; -+ program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ -@@ -300,7 +532,7 @@ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) -- program_transform_name="$ac_optarg" ;; -+ program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) -@@ -310,7 +542,7 @@ - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) -- sbindir="$ac_optarg" ;; -+ sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ -@@ -321,58 +553,57 @@ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) -- sharedstatedir="$ac_optarg" ;; -+ sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) -- site="$ac_optarg" ;; -+ site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) -- srcdir="$ac_optarg" ;; -+ srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) -- sysconfdir="$ac_optarg" ;; -+ sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) -- ac_prev=target ;; -+ ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) -- target="$ac_optarg" ;; -+ target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - -- -version | --version | --versio | --versi | --vers) -- echo "configure generated by autoconf version 2.13" -- exit 0 ;; -+ -version | --version | --versio | --versi | --vers | -V) -+ ac_init_version=: ;; - - -with-* | --with-*) -- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` -+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then -- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } -- fi -+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` -- case "$ac_option" in -- *=*) ;; -+ case $ac_option in -+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac -- eval "with_${ac_package}='$ac_optarg'" ;; -+ eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) -- ac_package=`echo $ac_option|sed -e 's/-*without-//'` -+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. -- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then -- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } -- fi -- ac_package=`echo $ac_package| sed 's/-/_/g'` -- eval "with_${ac_package}=no" ;; -+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/-/_/g'` -+ eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. -@@ -383,99 +614,110 @@ - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) -- x_includes="$ac_optarg" ;; -+ x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) -- x_libraries="$ac_optarg" ;; -+ x_libraries=$ac_optarg ;; - -- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } -+ -*) { echo "$as_me: error: unrecognized option: $ac_option -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; } - ;; - -+ *=*) -+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 -+ { (exit 1); exit 1; }; } -+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` -+ eval "$ac_envvar='$ac_optarg'" -+ export $ac_envvar ;; -+ - *) -- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then -- echo "configure: warning: $ac_option: invalid host type" 1>&2 -- fi -- if test "x$nonopt" != xNONE; then -- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } -- fi -- nonopt="$ac_option" -+ # FIXME: should be removed in autoconf 3.0. -+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 -+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac - done - - if test -n "$ac_prev"; then -- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } --fi -- --trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 -- --# File descriptor usage: --# 0 standard input --# 1 file creation --# 2 errors and warnings --# 3 some systems may open it to /dev/tty --# 4 used on the Kubota Titan --# 6 checking for... messages and results --# 5 compiler messages saved in config.log --if test "$silent" = yes; then -- exec 6>/dev/null --else -- exec 6>&1 -+ ac_option=--`echo $ac_prev | sed 's/_/-/g'` -+ { echo "$as_me: error: missing argument to $ac_option" >&2 -+ { (exit 1); exit 1; }; } - fi --exec 5>./config.log - --echo "\ --This file contains any messages produced by compilers while --running configure, to aid debugging if configure makes a mistake. --" 1>&5 -+# Be sure to have absolute paths. -+for ac_var in exec_prefix prefix -+do -+ eval ac_val=$`echo $ac_var` -+ case $ac_val in -+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;; -+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; };; -+ esac -+done - --# Strip out --no-create and --no-recursion so they do not pile up. --# Also quote any args containing shell metacharacters. --ac_configure_args= --for ac_arg -+# Be sure to have absolute paths. -+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ -+ localstatedir libdir includedir oldincludedir infodir mandir - do -- case "$ac_arg" in -- -no-create | --no-create | --no-creat | --no-crea | --no-cre \ -- | --no-cr | --no-c) ;; -- -no-recursion | --no-recursion | --no-recursio | --no-recursi \ -- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) -- ac_configure_args="$ac_configure_args '$ac_arg'" ;; -- *) ac_configure_args="$ac_configure_args $ac_arg" ;; -+ eval ac_val=$`echo $ac_var` -+ case $ac_val in -+ [\\/$]* | ?:[\\/]* ) ;; -+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; };; - esac - done - --# NLS nuisances. --# Only set these to C if already set. These must not be set unconditionally --# because not all systems understand e.g. LANG=C (notably SCO). --# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! --# Non-C LC_CTYPE values break the ctype check. --if test "${LANG+set}" = set; then LANG=C; export LANG; fi --if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi --if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi --if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi -+# There might be people who depend on the old broken behavior: `$host' -+# used to hold the argument of --host etc. -+# FIXME: To remove some day. -+build=$build_alias -+host=$host_alias -+target=$target_alias -+ -+# FIXME: To remove some day. -+if test "x$host_alias" != x; then -+ if test "x$build_alias" = x; then -+ cross_compiling=maybe -+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -+ If a cross compiler is detected then cross compile mode will be used." >&2 -+ elif test "x$build_alias" != "x$host_alias"; then -+ cross_compiling=yes -+ fi -+fi - --# confdefs.h avoids OS command line length limits that DEFS can exceed. --rm -rf conftest* confdefs.h --# AIX cpp loses on an empty file, so make sure it contains at least a newline. --echo > confdefs.h -+ac_tool_prefix= -+test -n "$host_alias" && ac_tool_prefix=$host_alias- -+ -+test "$silent" = yes && exec 6>/dev/null - --# A filename unique to this package, relative to the directory that --# configure is in, which we can look for to find out if srcdir is correct. --ac_unique_file=src/blackbox.cc - - # Find the source files, if location was not specified. - if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. -- ac_prog=$0 -- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` -- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. -+ ac_confdir=`(dirname "$0") 2>/dev/null || -+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$0" : 'X\(//\)[^/]' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X"$0" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -+ /^X\(\/\/\)[^/].*/{ s//\1/; q; } -+ /^X\(\/\/\)$/{ s//\1/; q; } -+ /^X\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. -@@ -485,13 +727,491 @@ - fi - if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then -- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } -+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 -+ { (exit 1); exit 1; }; } - else -- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } -+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -+ { (exit 1); exit 1; }; } - fi - fi --srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` -+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || -+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 -+ { (exit 1); exit 1; }; } -+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -+ac_env_build_alias_set=${build_alias+set} -+ac_env_build_alias_value=$build_alias -+ac_cv_env_build_alias_set=${build_alias+set} -+ac_cv_env_build_alias_value=$build_alias -+ac_env_host_alias_set=${host_alias+set} -+ac_env_host_alias_value=$host_alias -+ac_cv_env_host_alias_set=${host_alias+set} -+ac_cv_env_host_alias_value=$host_alias -+ac_env_target_alias_set=${target_alias+set} -+ac_env_target_alias_value=$target_alias -+ac_cv_env_target_alias_set=${target_alias+set} -+ac_cv_env_target_alias_value=$target_alias -+ac_env_CC_set=${CC+set} -+ac_env_CC_value=$CC -+ac_cv_env_CC_set=${CC+set} -+ac_cv_env_CC_value=$CC -+ac_env_CFLAGS_set=${CFLAGS+set} -+ac_env_CFLAGS_value=$CFLAGS -+ac_cv_env_CFLAGS_set=${CFLAGS+set} -+ac_cv_env_CFLAGS_value=$CFLAGS -+ac_env_LDFLAGS_set=${LDFLAGS+set} -+ac_env_LDFLAGS_value=$LDFLAGS -+ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -+ac_cv_env_LDFLAGS_value=$LDFLAGS -+ac_env_CPPFLAGS_set=${CPPFLAGS+set} -+ac_env_CPPFLAGS_value=$CPPFLAGS -+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -+ac_cv_env_CPPFLAGS_value=$CPPFLAGS -+ac_env_CXX_set=${CXX+set} -+ac_env_CXX_value=$CXX -+ac_cv_env_CXX_set=${CXX+set} -+ac_cv_env_CXX_value=$CXX -+ac_env_CXXFLAGS_set=${CXXFLAGS+set} -+ac_env_CXXFLAGS_value=$CXXFLAGS -+ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} -+ac_cv_env_CXXFLAGS_value=$CXXFLAGS -+ac_env_CPP_set=${CPP+set} -+ac_env_CPP_value=$CPP -+ac_cv_env_CPP_set=${CPP+set} -+ac_cv_env_CPP_value=$CPP -+ -+# -+# Report the --help message. -+# -+if test "$ac_init_help" = "long"; then -+ # Omit some internal or obsolete options to make the list less imposing. -+ # This message is too long to be a string in the A/UX 3.1 sh. -+ cat <<_ACEOF -+\`configure' configures this package to adapt to many kinds of systems. -+ -+Usage: $0 [OPTION]... [VAR=VALUE]... -+ -+To assign environment variables (e.g., CC, CFLAGS...), specify them as -+VAR=VALUE. See below for descriptions of some of the useful variables. -+ -+Defaults for the options are specified in brackets. -+ -+Configuration: -+ -h, --help display this help and exit -+ --help=short display options specific to this package -+ --help=recursive display the short help of all the included packages -+ -V, --version display version information and exit -+ -q, --quiet, --silent do not print \`checking...' messages -+ --cache-file=FILE cache test results in FILE [disabled] -+ -C, --config-cache alias for \`--cache-file=config.cache' -+ -n, --no-create do not create output files -+ --srcdir=DIR find the sources in DIR [configure dir or \`..'] -+ -+_ACEOF -+ -+ cat <<_ACEOF -+Installation directories: -+ --prefix=PREFIX install architecture-independent files in PREFIX -+ [$ac_default_prefix] -+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -+ [PREFIX] -+ -+By default, \`make install' will install all the files in -+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -+an installation prefix other than \`$ac_default_prefix' using \`--prefix', -+for instance \`--prefix=\$HOME'. -+ -+For better control, use the options below. -+ -+Fine tuning of the installation directories: -+ --bindir=DIR user executables [EPREFIX/bin] -+ --sbindir=DIR system admin executables [EPREFIX/sbin] -+ --libexecdir=DIR program executables [EPREFIX/libexec] -+ --datadir=DIR read-only architecture-independent data [PREFIX/share] -+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -+ --localstatedir=DIR modifiable single-machine data [PREFIX/var] -+ --libdir=DIR object code libraries [EPREFIX/lib] -+ --includedir=DIR C header files [PREFIX/include] -+ --oldincludedir=DIR C header files for non-gcc [/usr/include] -+ --infodir=DIR info documentation [PREFIX/info] -+ --mandir=DIR man documentation [PREFIX/man] -+_ACEOF -+ -+ cat <<\_ACEOF -+ -+Program names: -+ --program-prefix=PREFIX prepend PREFIX to installed program names -+ --program-suffix=SUFFIX append SUFFIX to installed program names -+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names -+ -+X features: -+ --x-includes=DIR X include files are in DIR -+ --x-libraries=DIR X library files are in DIR -+_ACEOF -+fi -+ -+if test -n "$ac_init_help"; then -+ -+ cat <<\_ACEOF -+ -+Optional Features: -+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) -+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] -+ --enable-shape enable support of the XShape extension default=yes -+ --enable-xinerama enable support of the xinerama extension default=yes -+ --enable-ordered-pseudo include code for ordered pseudocolor (8bpp) -+ dithering default=no -+ --enable-debug include verbose debugging code default=no -+ --enable-nls include natural language support default=yes -+ --enable-timed-cache use new timed pixmap cache default=yes -+ --enable-maintainer-mode enable make rules and dependencies not useful -+ (and sometimes confusing) to the casual installer -+ -+Optional Packages: -+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] -+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) -+ --with-x use the X Window System -+ -+Some influential environment variables: -+ CC C compiler command -+ CFLAGS C compiler flags -+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a -+ nonstandard directory <lib dir> -+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have -+ headers in a nonstandard directory <include dir> -+ CXX C++ compiler command -+ CXXFLAGS C++ compiler flags -+ CPP C preprocessor -+ -+Use these variables to override the choices made by `configure' or to help -+it to find libraries and programs with nonstandard names/locations. -+ -+_ACEOF -+fi -+ -+if test "$ac_init_help" = "recursive"; then -+ # If there are subdirs, report their specific --help. -+ ac_popdir=`pwd` -+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -+ test -d $ac_dir || continue -+ ac_builddir=. -+ -+if test "$ac_dir" != .; then -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A "../" for each directory in $ac_dir_suffix. -+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -+else -+ ac_dir_suffix= ac_top_builddir= -+fi -+ -+case $srcdir in -+ .) # No --srcdir option. We are building in place. -+ ac_srcdir=. -+ if test -z "$ac_top_builddir"; then -+ ac_top_srcdir=. -+ else -+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -+ fi ;; -+ [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir ;; -+ *) # Relative path. -+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_builddir$srcdir ;; -+esac -+ -+# Do not use `cd foo && pwd` to compute absolute paths, because -+# the directories may not exist. -+case `pwd` in -+.) ac_abs_builddir="$ac_dir";; -+*) -+ case "$ac_dir" in -+ .) ac_abs_builddir=`pwd`;; -+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -+ *) ac_abs_builddir=`pwd`/"$ac_dir";; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_top_builddir=${ac_top_builddir}.;; -+*) -+ case ${ac_top_builddir}. in -+ .) ac_abs_top_builddir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_srcdir=$ac_srcdir;; -+*) -+ case $ac_srcdir in -+ .) ac_abs_srcdir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_top_srcdir=$ac_top_srcdir;; -+*) -+ case $ac_top_srcdir in -+ .) ac_abs_top_srcdir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -+ esac;; -+esac -+ -+ cd $ac_dir -+ # Check for guested configure; otherwise get Cygnus style configure. -+ if test -f $ac_srcdir/configure.gnu; then -+ echo -+ $SHELL $ac_srcdir/configure.gnu --help=recursive -+ elif test -f $ac_srcdir/configure; then -+ echo -+ $SHELL $ac_srcdir/configure --help=recursive -+ elif test -f $ac_srcdir/configure.ac || -+ test -f $ac_srcdir/configure.in; then -+ echo -+ $ac_configure --help -+ else -+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -+ fi -+ cd "$ac_popdir" -+ done -+fi -+ -+test -n "$ac_init_help" && exit 0 -+if $ac_init_version; then -+ cat <<\_ACEOF -+ -+Copyright (C) 2003 Free Software Foundation, Inc. -+This configure script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it. -+_ACEOF -+ exit 0 -+fi -+exec 5>config.log -+cat >&5 <<_ACEOF -+This file contains any messages produced by compilers while -+running configure, to aid debugging if configure makes a mistake. -+ -+It was created by $as_me, which was -+generated by GNU Autoconf 2.59. Invocation command line was -+ -+ $ $0 $@ -+ -+_ACEOF -+{ -+cat <<_ASUNAME -+## --------- ## -+## Platform. ## -+## --------- ## -+ -+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -+uname -m = `(uname -m) 2>/dev/null || echo unknown` -+uname -r = `(uname -r) 2>/dev/null || echo unknown` -+uname -s = `(uname -s) 2>/dev/null || echo unknown` -+uname -v = `(uname -v) 2>/dev/null || echo unknown` -+ -+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` -+ -+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -+hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -+ -+_ASUNAME -+ -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ echo "PATH: $as_dir" -+done -+ -+} >&5 -+ -+cat >&5 <<_ACEOF -+ -+ -+## ----------- ## -+## Core tests. ## -+## ----------- ## -+ -+_ACEOF -+ -+ -+# Keep a trace of the command line. -+# Strip out --no-create and --no-recursion so they do not pile up. -+# Strip out --silent because we don't want to record it for future runs. -+# Also quote any args containing shell meta-characters. -+# Make two passes to allow for proper duplicate-argument suppression. -+ac_configure_args= -+ac_configure_args0= -+ac_configure_args1= -+ac_sep= -+ac_must_keep_next=false -+for ac_pass in 1 2 -+do -+ for ac_arg -+ do -+ case $ac_arg in -+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil) -+ continue ;; -+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ esac -+ case $ac_pass in -+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; -+ 2) -+ ac_configure_args1="$ac_configure_args1 '$ac_arg'" -+ if test $ac_must_keep_next = true; then -+ ac_must_keep_next=false # Got value, back to normal. -+ else -+ case $ac_arg in -+ *=* | --config-cache | -C | -disable-* | --disable-* \ -+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ -+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ -+ | -with-* | --with-* | -without-* | --without-* | --x) -+ case "$ac_configure_args0 " in -+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; -+ esac -+ ;; -+ -* ) ac_must_keep_next=true ;; -+ esac -+ fi -+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" -+ # Get rid of the leading space. -+ ac_sep=" " -+ ;; -+ esac -+ done -+done -+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } -+ -+# When interrupted or exit'd, cleanup temporary files, and complete -+# config.log. We remove comments because anyway the quotes in there -+# would cause problems or look ugly. -+# WARNING: Be sure not to use single quotes in there, as some shells, -+# such as our DU 5.0 friend, will then `close' the trap. -+trap 'exit_status=$? -+ # Save into config.log some information that might help in debugging. -+ { -+ echo -+ -+ cat <<\_ASBOX -+## ---------------- ## -+## Cache variables. ## -+## ---------------- ## -+_ASBOX -+ echo -+ # The following way of writing the cache mishandles newlines in values, -+{ -+ (set) 2>&1 | -+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in -+ *ac_space=\ *) -+ sed -n \ -+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" -+ ;; -+ *) -+ sed -n \ -+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -+ ;; -+ esac; -+} -+ echo -+ -+ cat <<\_ASBOX -+## ----------------- ## -+## Output variables. ## -+## ----------------- ## -+_ASBOX -+ echo -+ for ac_var in $ac_subst_vars -+ do -+ eval ac_val=$`echo $ac_var` -+ echo "$ac_var='"'"'$ac_val'"'"'" -+ done | sort -+ echo -+ -+ if test -n "$ac_subst_files"; then -+ cat <<\_ASBOX -+## ------------- ## -+## Output files. ## -+## ------------- ## -+_ASBOX -+ echo -+ for ac_var in $ac_subst_files -+ do -+ eval ac_val=$`echo $ac_var` -+ echo "$ac_var='"'"'$ac_val'"'"'" -+ done | sort -+ echo -+ fi -+ -+ if test -s confdefs.h; then -+ cat <<\_ASBOX -+## ----------- ## -+## confdefs.h. ## -+## ----------- ## -+_ASBOX -+ echo -+ sed "/^$/d" confdefs.h | sort -+ echo -+ fi -+ test "$ac_signal" != 0 && -+ echo "$as_me: caught signal $ac_signal" -+ echo "$as_me: exit $exit_status" -+ } >&5 -+ rm -f core *.core && -+ rm -rf conftest* confdefs* conf$$* $ac_clean_files && -+ exit $exit_status -+ ' 0 -+for ac_signal in 1 2 13 15; do -+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -+done -+ac_signal=0 - -+# confdefs.h avoids OS command line length limits that DEFS can exceed. -+rm -rf conftest* confdefs.h -+# AIX cpp loses on an empty file, so make sure it contains at least a newline. -+echo >confdefs.h -+ -+# Predefined preprocessor variables. -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_NAME "$PACKAGE_NAME" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_VERSION "$PACKAGE_VERSION" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_STRING "$PACKAGE_STRING" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -+_ACEOF -+ -+ -+# Let the site file select an alternate cache file if it wants to. - # Prefer explicitly selected file to automatically selected ones. - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then -@@ -502,39 +1222,103 @@ - fi - for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then -- echo "loading site script $ac_site_file" -+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -+echo "$as_me: loading site script $ac_site_file" >&6;} -+ sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi - done - - if test -r "$cache_file"; then -- echo "loading cache $cache_file" -- . $cache_file -+ # Some versions of bash will fail to source /dev/null (special -+ # files actually), so we avoid doing that. -+ if test -f "$cache_file"; then -+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -+echo "$as_me: loading cache $cache_file" >&6;} -+ case $cache_file in -+ [\\/]* | ?:[\\/]* ) . $cache_file;; -+ *) . ./$cache_file;; -+ esac -+ fi - else -- echo "creating cache $cache_file" -- > $cache_file -+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -+echo "$as_me: creating cache $cache_file" >&6;} -+ >$cache_file -+fi -+ -+# Check that the precious variables saved in the cache have kept the same -+# value. -+ac_cache_corrupted=false -+for ac_var in `(set) 2>&1 | -+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do -+ eval ac_old_set=\$ac_cv_env_${ac_var}_set -+ eval ac_new_set=\$ac_env_${ac_var}_set -+ eval ac_old_val="\$ac_cv_env_${ac_var}_value" -+ eval ac_new_val="\$ac_env_${ac_var}_value" -+ case $ac_old_set,$ac_new_set in -+ set,) -+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} -+ ac_cache_corrupted=: ;; -+ ,set) -+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} -+ ac_cache_corrupted=: ;; -+ ,);; -+ *) -+ if test "x$ac_old_val" != "x$ac_new_val"; then -+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -+echo "$as_me: former value: $ac_old_val" >&2;} -+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -+echo "$as_me: current value: $ac_new_val" >&2;} -+ ac_cache_corrupted=: -+ fi;; -+ esac -+ # Pass precious variables to config.status. -+ if test "$ac_new_set" = set; then -+ case $ac_new_val in -+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *) ac_arg=$ac_var=$ac_new_val ;; -+ esac -+ case " $ac_configure_args " in -+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. -+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; -+ esac -+ fi -+done -+if $ac_cache_corrupted; then -+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -+echo "$as_me: error: changes in the environment can compromise the build" >&2;} -+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} -+ { (exit 1); exit 1; }; } - fi - - ac_ext=c --# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. - ac_cpp='$CPP $CPPFLAGS' --ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' --ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' --cross_compiling=$ac_cv_prog_cc_cross -- --ac_exeext= --ac_objext=o --if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then -- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. -- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then -- ac_n= ac_c=' --' ac_t=' ' -- else -- ac_n=-n ac_c= ac_t= -- fi --else -- ac_n= ac_c='\c' ac_t= --fi -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ - - - ac_aux_dir= -@@ -547,14 +1331,20 @@ - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break -+ elif test -f $ac_dir/shtool; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/shtool install -c" -+ break - fi - done - if test -z "$ac_aux_dir"; then -- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } --fi --ac_config_guess=$ac_aux_dir/config.guess --ac_config_sub=$ac_aux_dir/config.sub --ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. -+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ac_config_guess="$SHELL $ac_aux_dir/config.guess" -+ac_config_sub="$SHELL $ac_aux_dir/config.sub" -+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - - # Find a good install program. We prefer a C program (faster), - # so one script is as good as another. But avoid the broken or -@@ -563,65 +1353,80 @@ - # SunOS /usr/etc/install - # IRIX /sbin/install - # AIX /bin/install -+# AmigaOS /C/install, which installs bootblocks on floppy discs - # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag - # AFS /usr/afsws/bin/install, which mishandles nonexistent args - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -+# OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 --echo "configure:572: checking for a BSD compatible install" >&5 -+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 - if test -z "$INSTALL"; then --if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+if test "${ac_cv_path_install+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" -- for ac_dir in $PATH; do -- # Account for people who put trailing slashes in PATH elements. -- case "$ac_dir/" in -- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; -- *) -- # OSF1 and SCO ODT 3.0 have their own names for install. -- # Don't use installbsd from OSF since it installs stuff as root -- # by default. -- for ac_prog in ginstall scoinst install; do -- if test -f $ac_dir/$ac_prog; then -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ # Account for people who put trailing slashes in PATH elements. -+case $as_dir/ in -+ ./ | .// | /cC/* | \ -+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ -+ /usr/ucb/* ) ;; -+ *) -+ # OSF1 and SCO ODT 3.0 have their own names for install. -+ # Don't use installbsd from OSF since it installs stuff as root -+ # by default. -+ for ac_prog in ginstall scoinst install; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && -- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then -+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : -+ elif test $ac_prog = install && -+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # program-specific install script used by HP pwplus--don't use. -+ : - else -- ac_cv_path_install="$ac_dir/$ac_prog -c" -- break 2 -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 - fi - fi - done -- ;; -- esac -- done -- IFS="$ac_save_IFS" -+ done -+ ;; -+esac -+done -+ - - fi - if test "${ac_cv_path_install+set}" = set; then -- INSTALL="$ac_cv_path_install" -+ INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. -- INSTALL="$ac_install_sh" -+ INSTALL=$ac_install_sh - fi - fi --echo "$ac_t""$INSTALL" 1>&6 -+echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6 - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. - test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - --test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' -+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - - test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - --echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 --echo "configure:625: checking whether build environment is sane" >&5 -+echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 - # Just in case - sleep 1 - echo timestamp > conftestfile -@@ -643,8 +1448,11 @@ - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". -- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken --alias in your environment" 1>&2; exit 1; } -+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -+alias in your environment" >&5 -+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -+alias in your environment" >&2;} -+ { (exit 1); exit 1; }; } - fi - - test "$2" = conftestfile -@@ -653,54 +1461,54 @@ - # Ok. - : - else -- { echo "configure: error: newly created file is older than distributed files! --Check your system clock" 1>&2; exit 1; } -+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -+Check your system clock" >&5 -+echo "$as_me: error: newly created file is older than distributed files! -+Check your system clock" >&2;} -+ { (exit 1); exit 1; }; } - fi - rm -f conftest* --echo "$ac_t""yes" 1>&6 --if test "$program_transform_name" = s,x,x,; then -- program_transform_name= --else -- # Double any \ or $. echo might interpret backslashes. -- cat <<\EOF_SED > conftestsed --s,\\,\\\\,g; s,\$,$$,g --EOF_SED -- program_transform_name="`echo $program_transform_name|sed -f conftestsed`" -- rm -f conftestsed --fi -+echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - test "$program_prefix" != NONE && -- program_transform_name="s,^,${program_prefix},; $program_transform_name" -+ program_transform_name="s,^,$program_prefix,;$program_transform_name" - # Use a double $ so make ignores it. - test "$program_suffix" != NONE && -- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" -- --# sed with no file args requires a program. --test "$program_transform_name" = "" && program_transform_name="s,x,x," -- --echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 --echo "configure:682: checking whether ${MAKE-make} sets \${MAKE}" >&5 --set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ program_transform_name="s,\$,$program_suffix,;$program_transform_name" -+# Double any \ or $. echo might interpret backslashes. -+# By default was `s,x,x', remove it if useless. -+cat <<\_ACEOF >conftest.sed -+s/[\\$]/&&/g;s/;s,x,x,$// -+_ACEOF -+program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -+rm conftest.sed -+ -+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- cat > conftestmake <<\EOF -+ cat >conftest.make <<\_ACEOF - all: -- @echo 'ac_maketemp="${MAKE}"' --EOF -+ @echo 'ac_maketemp="$(MAKE)"' -+_ACEOF - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. --eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` - if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes - else - eval ac_cv_prog_make_${ac_make}_set=no - fi --rm -f conftestmake -+rm -f conftest.make - fi - if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - SET_MAKE= - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" - fi - -@@ -710,75 +1518,87 @@ - VERSION=0.65.0 - - if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then -- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } -+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} -+ { (exit 1); exit 1; }; } - fi - - - - missing_dir=`cd $ac_aux_dir && pwd` --echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 --echo "configure:721: checking for working aclocal" >&5 -+echo "$as_me:$LINENO: checking for working aclocal" >&5 -+echo $ECHO_N "checking for working aclocal... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (aclocal --version) < /dev/null > /dev/null 2>&1; then - ACLOCAL=aclocal -- echo "$ac_t""found" 1>&6 -+ echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6 - else - ACLOCAL="$missing_dir/missing aclocal" -- echo "$ac_t""missing" 1>&6 -+ echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6 - fi - --echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 --echo "configure:734: checking for working autoconf" >&5 -+echo "$as_me:$LINENO: checking for working autoconf" >&5 -+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (autoconf --version) < /dev/null > /dev/null 2>&1; then - AUTOCONF=autoconf -- echo "$ac_t""found" 1>&6 -+ echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6 - else - AUTOCONF="$missing_dir/missing autoconf" -- echo "$ac_t""missing" 1>&6 -+ echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6 - fi - --echo $ac_n "checking for working automake""... $ac_c" 1>&6 --echo "configure:747: checking for working automake" >&5 -+echo "$as_me:$LINENO: checking for working automake" >&5 -+echo $ECHO_N "checking for working automake... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (automake --version) < /dev/null > /dev/null 2>&1; then - AUTOMAKE=automake -- echo "$ac_t""found" 1>&6 -+ echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6 - else - AUTOMAKE="$missing_dir/missing automake" -- echo "$ac_t""missing" 1>&6 -+ echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6 - fi - --echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 --echo "configure:760: checking for working autoheader" >&5 -+echo "$as_me:$LINENO: checking for working autoheader" >&5 -+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (autoheader --version) < /dev/null > /dev/null 2>&1; then - AUTOHEADER=autoheader -- echo "$ac_t""found" 1>&6 -+ echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6 - else - AUTOHEADER="$missing_dir/missing autoheader" -- echo "$ac_t""missing" 1>&6 -+ echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6 - fi - --echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 --echo "configure:773: checking for working makeinfo" >&5 -+echo "$as_me:$LINENO: checking for working makeinfo" >&5 -+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6 - # Run test in a subshell; some versions of sh will print an error if - # an executable is not found, even if stderr is redirected. - # Redirect stdin to placate older versions of autoconf. Sigh. - if (makeinfo --version) < /dev/null > /dev/null 2>&1; then - MAKEINFO=makeinfo -- echo "$ac_t""found" 1>&6 -+ echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6 - else - MAKEINFO="$missing_dir/missing makeinfo" -- echo "$ac_t""missing" 1>&6 -+ echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6 - fi - - -@@ -786,214 +1606,657 @@ - test x$prefix = "xNONE" && prefix="$ac_default_prefix" - - --# Extract the first word of "gcc", so it can be a program name with args. --set dummy gcc; ac_word=$2 --echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 --echo "configure:793: checking for $ac_word" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -+set dummy ${ac_tool_prefix}gcc; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. - else -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -- ac_dummy="$PATH" -- for ac_dir in $ac_dummy; do -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/$ac_word; then -- ac_cv_prog_CC="gcc" -- break -- fi -- done -- IFS="$ac_save_ifs" -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_CC="${ac_tool_prefix}gcc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ - fi - fi --CC="$ac_cv_prog_CC" -+CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$ac_t""$CC" 1>&6 -+ echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6 - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - --if test -z "$CC"; then -- # Extract the first word of "cc", so it can be a program name with args. --set dummy cc; ac_word=$2 --echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 --echo "configure:823: checking for $ac_word" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+fi -+if test -z "$ac_cv_prog_CC"; then -+ ac_ct_CC=$CC -+ # Extract the first word of "gcc", so it can be a program name with args. -+set dummy gcc; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- if test -n "$CC"; then -- ac_cv_prog_CC="$CC" # Let the user override the test. -+ if test -n "$ac_ct_CC"; then -+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. - else -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -- ac_prog_rejected=no -- ac_dummy="$PATH" -- for ac_dir in $ac_dummy; do -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/$ac_word; then -- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then -- ac_prog_rejected=yes -- continue -- fi -- ac_cv_prog_CC="cc" -- break -- fi -- done -- IFS="$ac_save_ifs" -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_ac_ct_CC="gcc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ -+fi -+fi -+ac_ct_CC=$ac_cv_prog_ac_ct_CC -+if test -n "$ac_ct_CC"; then -+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+echo "${ECHO_T}$ac_ct_CC" >&6 -+else -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+fi -+ -+ CC=$ac_ct_CC -+else -+ CC="$ac_cv_prog_CC" -+fi -+ -+if test -z "$CC"; then -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -+set dummy ${ac_tool_prefix}cc; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$CC"; then -+ ac_cv_prog_CC="$CC" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_CC="${ac_tool_prefix}cc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ -+fi -+fi -+CC=$ac_cv_prog_CC -+if test -n "$CC"; then -+ echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6 -+else -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+fi -+ -+fi -+if test -z "$ac_cv_prog_CC"; then -+ ac_ct_CC=$CC -+ # Extract the first word of "cc", so it can be a program name with args. -+set dummy cc; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$ac_ct_CC"; then -+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_ac_ct_CC="cc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ -+fi -+fi -+ac_ct_CC=$ac_cv_prog_ac_ct_CC -+if test -n "$ac_ct_CC"; then -+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+echo "${ECHO_T}$ac_ct_CC" >&6 -+else -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+fi -+ -+ CC=$ac_ct_CC -+else -+ CC="$ac_cv_prog_CC" -+fi -+ -+fi -+if test -z "$CC"; then -+ # Extract the first word of "cc", so it can be a program name with args. -+set dummy cc; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$CC"; then -+ ac_cv_prog_CC="$CC" # Let the user override the test. -+else -+ ac_prog_rejected=no -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then -+ ac_prog_rejected=yes -+ continue -+ fi -+ ac_cv_prog_CC="cc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ - if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift -- if test $# -gt 0; then -+ if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift -- set dummy "$ac_dir/$ac_word" "$@" -- shift -- ac_cv_prog_CC="$@" -+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi - fi - fi - fi --CC="$ac_cv_prog_CC" -+CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$ac_t""$CC" 1>&6 -+ echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6 - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - -- if test -z "$CC"; then -- case "`uname -s`" in -- *win32* | *WIN32*) -- # Extract the first word of "cl", so it can be a program name with args. --set dummy cl; ac_word=$2 --echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 --echo "configure:874: checking for $ac_word" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+fi -+if test -z "$CC"; then -+ if test -n "$ac_tool_prefix"; then -+ for ac_prog in cl -+ do -+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -+set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. - else -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -- ac_dummy="$PATH" -- for ac_dir in $ac_dummy; do -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/$ac_word; then -- ac_cv_prog_CC="cl" -- break -- fi -- done -- IFS="$ac_save_ifs" -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ - fi - fi --CC="$ac_cv_prog_CC" -+CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$ac_t""$CC" 1>&6 -+ echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6 - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi -- ;; -- esac -+ -+ test -n "$CC" && break -+ done -+fi -+if test -z "$CC"; then -+ ac_ct_CC=$CC -+ for ac_prog in cl -+do -+ # Extract the first word of "$ac_prog", so it can be a program name with args. -+set dummy $ac_prog; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$ac_ct_CC"; then -+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_ac_ct_CC="$ac_prog" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 - fi -- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -+done -+done -+ -+fi -+fi -+ac_ct_CC=$ac_cv_prog_ac_ct_CC -+if test -n "$ac_ct_CC"; then -+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+echo "${ECHO_T}$ac_ct_CC" >&6 -+else -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - --echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 --echo "configure:906: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 -+ test -n "$ac_ct_CC" && break -+done - --ac_ext=c --# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. --ac_cpp='$CPP $CPPFLAGS' --ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' --ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' --cross_compiling=$ac_cv_prog_cc_cross -+ CC=$ac_ct_CC -+fi - --cat > conftest.$ac_ext << EOF -+fi - --#line 917 "configure" --#include "confdefs.h" - --main(){return(0);} --EOF --if { (eval echo configure:922: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- ac_cv_prog_cc_works=yes -- # If we can't run a trivial program, we are probably using a cross compiler. -- if (./conftest; exit) 2>/dev/null; then -- ac_cv_prog_cc_cross=no -- else -- ac_cv_prog_cc_cross=yes -- fi -+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -+See \`config.log' for more details." >&5 -+echo "$as_me: error: no acceptable C compiler found in \$PATH -+See \`config.log' for more details." >&2;} -+ { (exit 1); exit 1; }; } -+ -+# Provide some information about the compiler. -+echo "$as_me:$LINENO:" \ -+ "checking for C compiler version" >&5 -+ac_compiler=`set X $ac_compile; echo $2` -+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 -+ (eval $ac_compiler --version </dev/null >&5) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } -+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 -+ (eval $ac_compiler -v </dev/null >&5) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } -+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 -+ (eval $ac_compiler -V </dev/null >&5) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } -+ -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+ac_clean_files_save=$ac_clean_files -+ac_clean_files="$ac_clean_files a.out a.exe b.out" -+# Try to create an executable without -o first, disregard a.out. -+# It will help us diagnose broken compilers, and finding out an intuition -+# of exeext. -+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 -+ (eval $ac_link_default) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ # Find the output, starting from the most likely. This scheme is -+# not robust to junk in `.', hence go to wildcards (a.*) only as a last -+# resort. -+ -+# Be careful to initialize this variable, since it used to be cached. -+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -+ac_cv_exeext= -+# b.out is created by i960 compilers. -+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -+do -+ test -f "$ac_file" || continue -+ case $ac_file in -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) -+ ;; -+ conftest.$ac_ext ) -+ # This is the source file. -+ ;; -+ [ab].out ) -+ # We found the default executable, but exeext='' is most -+ # certainly right. -+ break;; -+ *.* ) -+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -+ # FIXME: I believe we export ac_cv_exeext for Libtool, -+ # but it would be cool to find out if it's true. Does anybody -+ # maintain Libtool? --akim. -+ export ac_cv_exeext -+ break;; -+ * ) -+ break;; -+ esac -+done - else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- ac_cv_prog_cc_works=no --fi --rm -fr conftest* --ac_ext=c --# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. --ac_cpp='$CPP $CPPFLAGS' --ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' --ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' --cross_compiling=$ac_cv_prog_cc_cross -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 --if test $ac_cv_prog_cc_works = no; then -- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -+See \`config.log' for more details." >&5 -+echo "$as_me: error: C compiler cannot create executables -+See \`config.log' for more details." >&2;} -+ { (exit 77); exit 77; }; } -+fi -+ -+ac_exeext=$ac_cv_exeext -+echo "$as_me:$LINENO: result: $ac_file" >&5 -+echo "${ECHO_T}$ac_file" >&6 -+ -+# Check the compiler produces executables we can run. If not, either -+# the compiler is broken, or we cross compile. -+echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -+# If not cross compiling, check that we can run a simple program. -+if test "$cross_compiling" != yes; then -+ if { ac_try='./$ac_file' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ cross_compiling=no -+ else -+ if test "$cross_compiling" = maybe; then -+ cross_compiling=yes -+ else -+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -+If you meant to cross compile, use \`--host'. -+See \`config.log' for more details." >&5 -+echo "$as_me: error: cannot run C compiled programs. -+If you meant to cross compile, use \`--host'. -+See \`config.log' for more details." >&2;} -+ { (exit 1); exit 1; }; } -+ fi -+ fi - fi --echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 --echo "configure:948: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 --echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 --cross_compiling=$ac_cv_prog_cc_cross -+echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - --echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 --echo "configure:953: checking whether we are using GNU C" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+rm -f a.out a.exe conftest$ac_cv_exeext b.out -+ac_clean_files=$ac_clean_files_save -+# Check the compiler produces executables we can run. If not, either -+# the compiler is broken, or we cross compile. -+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -+echo "$as_me:$LINENO: result: $cross_compiling" >&5 -+echo "${ECHO_T}$cross_compiling" >&6 -+ -+echo "$as_me:$LINENO: checking for suffix of executables" >&5 -+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ # If both `conftest.exe' and `conftest' are `present' (well, observable) -+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -+# work properly (i.e., refer to `conftest.exe'), while it won't with -+# `rm'. -+for ac_file in conftest.exe conftest conftest.*; do -+ test -f "$ac_file" || continue -+ case $ac_file in -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; -+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -+ export ac_cv_exeext -+ break;; -+ * ) break;; -+ esac -+done - else -- cat > conftest.c <<EOF --#ifdef __GNUC__ -- yes; --#endif --EOF --if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:962: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then -- ac_cv_prog_gcc=yes -+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -+See \`config.log' for more details." >&5 -+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -+See \`config.log' for more details." >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+rm -f conftest$ac_cv_exeext -+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -+echo "${ECHO_T}$ac_cv_exeext" >&6 -+ -+rm -f conftest.$ac_ext -+EXEEXT=$ac_cv_exeext -+ac_exeext=$EXEEXT -+echo "$as_me:$LINENO: checking for suffix of object files" >&5 -+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -+if test "${ac_cv_objext+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.o conftest.obj -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; then -+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do -+ case $ac_file in -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; -+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` -+ break;; -+ esac -+done - else -- ac_cv_prog_gcc=no --fi --fi -- --echo "$ac_t""$ac_cv_prog_gcc" 1>&6 -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --if test $ac_cv_prog_gcc = yes; then -- GCC=yes --else -- GCC= --fi -+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -+See \`config.log' for more details." >&5 -+echo "$as_me: error: cannot compute suffix of object files: cannot compile -+See \`config.log' for more details." >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+rm -f conftest.$ac_cv_objext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -+echo "${ECHO_T}$ac_cv_objext" >&6 -+OBJEXT=$ac_cv_objext -+ac_objext=$OBJEXT -+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -+if test "${ac_cv_c_compiler_gnu+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+#ifndef __GNUC__ -+ choke me -+#endif - --ac_test_CFLAGS="${CFLAGS+set}" --ac_save_CFLAGS="$CFLAGS" --CFLAGS= --echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 --echo "configure:981: checking whether ${CC-cc} accepts -g" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- echo 'void f(){}' > conftest.c --if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_compiler_gnu=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_compiler_gnu=no -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ac_cv_c_compiler_gnu=$ac_compiler_gnu -+ -+fi -+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -+GCC=`test $ac_compiler_gnu = yes && echo yes` -+ac_test_CFLAGS=${CFLAGS+set} -+ac_save_CFLAGS=$CFLAGS -+CFLAGS="-g" -+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -+if test "${ac_cv_prog_cc_g+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes - else -- ac_cv_prog_cc_g=no --fi --rm -f conftest* -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - -+ac_cv_prog_cc_g=no - fi -- --echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 - if test "$ac_test_CFLAGS" = set; then -- CFLAGS="$ac_save_CFLAGS" -+ CFLAGS=$ac_save_CFLAGS - elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" -@@ -1007,136 +2270,494 @@ - CFLAGS= - fi - fi -- --for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl -+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -+if test "${ac_cv_prog_cc_stdc+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_cv_prog_cc_stdc=no -+ac_save_CC=$CC -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <stdarg.h> -+#include <stdio.h> -+#include <sys/types.h> -+#include <sys/stat.h> -+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -+struct buf { int x; }; -+FILE * (*rcsopen) (struct buf *, struct stat *, int); -+static char *e (p, i) -+ char **p; -+ int i; -+{ -+ return p[i]; -+} -+static char *f (char * (*g) (char **, int), char **p, ...) -+{ -+ char *s; -+ va_list v; -+ va_start (v,p); -+ s = g (p, va_arg (v,int)); -+ va_end (v); -+ return s; -+} -+ -+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has -+ function prototypes and stuff, but not '\xHH' hex character constants. -+ These don't provoke an error unfortunately, instead are silently treated -+ as 'x'. The following induces an error, until -std1 is added to get -+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an -+ array size at least. It's necessary to write '\x00'==0 to get something -+ that's true only with -std1. */ -+int osf4_cc_array ['\x00' == 0 ? 1 : -1]; -+ -+int test (int i, double x); -+struct s1 {int (*f) (int a);}; -+struct s2 {int (*f) (double a);}; -+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -+int argc; -+char **argv; -+int -+main () -+{ -+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; -+ ; -+ return 0; -+} -+_ACEOF -+# Don't try gcc -ansi; that turns off useful extensions and -+# breaks some systems' header files. -+# AIX -qlanglvl=ansi -+# Ultrix and OSF/1 -std1 -+# HP-UX 10.20 and later -Ae -+# HP-UX older versions -Aa -D_HPUX_SOURCE -+# SVR4 -Xc -D__EXTENSIONS__ -+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" - do --# Extract the first word of "$ac_prog", so it can be a program name with args. --set dummy $ac_prog; ac_word=$2 --echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 --echo "configure:1017: checking for $ac_word" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ CC="$ac_save_CC $ac_arg" -+ rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_prog_cc_stdc=$ac_arg -+break - else -- if test -n "$CXX"; then -- ac_cv_prog_CXX="$CXX" # Let the user override the test. --else -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -- ac_dummy="$PATH" -- for ac_dir in $ac_dummy; do -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/$ac_word; then -- ac_cv_prog_CXX="$ac_prog" -- break -- fi -- done -- IFS="$ac_save_ifs" -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ - fi -+rm -f conftest.err conftest.$ac_objext -+done -+rm -f conftest.$ac_ext conftest.$ac_objext -+CC=$ac_save_CC -+ - fi --CXX="$ac_cv_prog_CXX" --if test -n "$CXX"; then -- echo "$ac_t""$CXX" 1>&6 -+ -+case "x$ac_cv_prog_cc_stdc" in -+ x|xno) -+ echo "$as_me:$LINENO: result: none needed" >&5 -+echo "${ECHO_T}none needed" >&6 ;; -+ *) -+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 -+ CC="$CC $ac_cv_prog_cc_stdc" ;; -+esac -+ -+# Some people use a C++ compiler to compile C. Since we use `exit', -+# in C++ we need to declare it. In case someone uses the same compiler -+# for both compiling C and C++ we need to have the C++ compiler decide -+# the declaration of exit, since it's the most demanding environment. -+cat >conftest.$ac_ext <<_ACEOF -+#ifndef __cplusplus -+ choke me -+#endif -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ for ac_declaration in \ -+ '' \ -+ 'extern "C" void std::exit (int) throw (); using std::exit;' \ -+ 'extern "C" void std::exit (int); using std::exit;' \ -+ 'extern "C" void exit (int) throw ();' \ -+ 'extern "C" void exit (int);' \ -+ 'void exit (int);' -+do -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+$ac_declaration -+#include <stdlib.h> -+int -+main () -+{ -+exit (42); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ : - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+continue - fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+$ac_declaration -+int -+main () -+{ -+exit (42); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ break -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --test -n "$CXX" && break -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done --test -n "$CXX" || CXX="gcc" -+rm -f conftest* -+if test -n "$ac_declaration"; then -+ echo '#ifdef __cplusplus' >>confdefs.h -+ echo $ac_declaration >>confdefs.h -+ echo '#endif' >>confdefs.h -+fi - -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 --echo "configure:1049: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu - --ac_ext=C --# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -+ac_ext=cc - ac_cpp='$CXXCPP $CPPFLAGS' --ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' --ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' --cross_compiling=$ac_cv_prog_cxx_cross -- --cat > conftest.$ac_ext << EOF -- --#line 1060 "configure" --#include "confdefs.h" -- --int main(){return(0);} --EOF --if { (eval echo configure:1065: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- ac_cv_prog_cxx_works=yes -- # If we can't run a trivial program, we are probably using a cross compiler. -- if (./conftest; exit) 2>/dev/null; then -- ac_cv_prog_cxx_cross=no -- else -- ac_cv_prog_cxx_cross=yes -+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -+if test -n "$ac_tool_prefix"; then -+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -+ do -+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -+set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_CXX+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$CXX"; then -+ ac_cv_prog_CXX="$CXX" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 - fi -+done -+done -+ -+fi -+fi -+CXX=$ac_cv_prog_CXX -+if test -n "$CXX"; then -+ echo "$as_me:$LINENO: result: $CXX" >&5 -+echo "${ECHO_T}$CXX" >&6 - else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- ac_cv_prog_cxx_works=no -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi --rm -fr conftest* --ac_ext=c --# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. --ac_cpp='$CPP $CPPFLAGS' --ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' --ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' --cross_compiling=$ac_cv_prog_cc_cross - --echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 --if test $ac_cv_prog_cxx_works = no; then -- { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } -+ test -n "$CXX" && break -+ done - fi --echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 --echo "configure:1091: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 --echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 --cross_compiling=$ac_cv_prog_cxx_cross -- --echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 --echo "configure:1096: checking whether we are using GNU C++" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+if test -z "$CXX"; then -+ ac_ct_CXX=$CXX -+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -+do -+ # Extract the first word of "$ac_prog", so it can be a program name with args. -+set dummy $ac_prog; ac_word=$2 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- cat > conftest.C <<EOF --#ifdef __GNUC__ -- yes; --#endif --EOF --if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then -- ac_cv_prog_gxx=yes -+ if test -n "$ac_ct_CXX"; then -+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. - else -- ac_cv_prog_gxx=no -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_ac_ct_CXX="$ac_prog" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ - fi - fi -+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -+if test -n "$ac_ct_CXX"; then -+ echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -+echo "${ECHO_T}$ac_ct_CXX" >&6 -+else -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+fi - --echo "$ac_t""$ac_cv_prog_gxx" 1>&6 -+ test -n "$ac_ct_CXX" && break -+done -+test -n "$ac_ct_CXX" || ac_ct_CXX="g++" - --if test $ac_cv_prog_gxx = yes; then -- GXX=yes --else -- GXX= -+ CXX=$ac_ct_CXX - fi - --ac_test_CXXFLAGS="${CXXFLAGS+set}" --ac_save_CXXFLAGS="$CXXFLAGS" --CXXFLAGS= --echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 --echo "configure:1124: checking whether ${CXX-g++} accepts -g" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- echo 'void f(){}' > conftest.cc --if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then -+ -+# Provide some information about the compiler. -+echo "$as_me:$LINENO:" \ -+ "checking for C++ compiler version" >&5 -+ac_compiler=`set X $ac_compile; echo $2` -+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 -+ (eval $ac_compiler --version </dev/null >&5) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } -+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 -+ (eval $ac_compiler -v </dev/null >&5) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } -+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 -+ (eval $ac_compiler -V </dev/null >&5) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } -+ -+echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 -+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+#ifndef __GNUC__ -+ choke me -+#endif -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_compiler_gnu=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_compiler_gnu=no -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu -+ -+fi -+echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 -+GXX=`test $ac_compiler_gnu = yes && echo yes` -+ac_test_CXXFLAGS=${CXXFLAGS+set} -+ac_save_CXXFLAGS=$CXXFLAGS -+CXXFLAGS="-g" -+echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 -+if test "${ac_cv_prog_cxx_g+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then - ac_cv_prog_cxx_g=yes - else -- ac_cv_prog_cxx_g=no --fi --rm -f conftest* -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - -+ac_cv_prog_cxx_g=no - fi -- --echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 - if test "$ac_test_CXXFLAGS" = set; then -- CXXFLAGS="$ac_save_CXXFLAGS" -+ CXXFLAGS=$ac_save_CXXFLAGS - elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" -@@ -1150,6 +2771,115 @@ - CXXFLAGS= - fi - fi -+for ac_declaration in \ -+ '' \ -+ 'extern "C" void std::exit (int) throw (); using std::exit;' \ -+ 'extern "C" void std::exit (int); using std::exit;' \ -+ 'extern "C" void exit (int) throw ();' \ -+ 'extern "C" void exit (int);' \ -+ 'void exit (int);' -+do -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+$ac_declaration -+#include <stdlib.h> -+int -+main () -+{ -+exit (42); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ : -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+continue -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+$ac_declaration -+int -+main () -+{ -+exit (42); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ break -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+done -+rm -f conftest* -+if test -n "$ac_declaration"; then -+ echo '#ifdef __cplusplus' >>confdefs.h -+ echo $ac_declaration >>confdefs.h -+ echo '#endif' >>confdefs.h -+fi -+ -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu - - # Find a good install program. We prefer a C program (faster), - # so one script is as good as another. But avoid the broken or -@@ -1158,505 +2888,1513 @@ - # SunOS /usr/etc/install - # IRIX /sbin/install - # AIX /bin/install -+# AmigaOS /C/install, which installs bootblocks on floppy discs - # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag - # AFS /usr/afsws/bin/install, which mishandles nonexistent args - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -+# OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 --echo "configure:1167: checking for a BSD compatible install" >&5 -+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 - if test -z "$INSTALL"; then --if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+if test "${ac_cv_path_install+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" -- for ac_dir in $PATH; do -- # Account for people who put trailing slashes in PATH elements. -- case "$ac_dir/" in -- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; -- *) -- # OSF1 and SCO ODT 3.0 have their own names for install. -- # Don't use installbsd from OSF since it installs stuff as root -- # by default. -- for ac_prog in ginstall scoinst install; do -- if test -f $ac_dir/$ac_prog; then -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ # Account for people who put trailing slashes in PATH elements. -+case $as_dir/ in -+ ./ | .// | /cC/* | \ -+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ -+ /usr/ucb/* ) ;; -+ *) -+ # OSF1 and SCO ODT 3.0 have their own names for install. -+ # Don't use installbsd from OSF since it installs stuff as root -+ # by default. -+ for ac_prog in ginstall scoinst install; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && -- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then -+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : -+ elif test $ac_prog = install && -+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # program-specific install script used by HP pwplus--don't use. -+ : - else -- ac_cv_path_install="$ac_dir/$ac_prog -c" -- break 2 -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 - fi - fi - done -- ;; -- esac -- done -- IFS="$ac_save_IFS" -+ done -+ ;; -+esac -+done -+ - - fi - if test "${ac_cv_path_install+set}" = set; then -- INSTALL="$ac_cv_path_install" -+ INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. -- INSTALL="$ac_install_sh" -+ INSTALL=$ac_install_sh - fi - fi --echo "$ac_t""$INSTALL" 1>&6 -+echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6 - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. - test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - --test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' -+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - - test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - - for ac_prog in sed - do --# Extract the first word of "$ac_prog", so it can be a program name with args. -+ # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 --echo "configure:1225: checking for $ac_word" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_regex_cmd'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_regex_cmd+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$regex_cmd"; then - ac_cv_prog_regex_cmd="$regex_cmd" # Let the user override the test. - else -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -- ac_dummy="$PATH" -- for ac_dir in $ac_dummy; do -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/$ac_word; then -- ac_cv_prog_regex_cmd="$ac_prog" -- break -- fi -- done -- IFS="$ac_save_ifs" -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_regex_cmd="$ac_prog" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ - fi - fi --regex_cmd="$ac_cv_prog_regex_cmd" -+regex_cmd=$ac_cv_prog_regex_cmd - if test -n "$regex_cmd"; then -- echo "$ac_t""$regex_cmd" 1>&6 -+ echo "$as_me:$LINENO: result: $regex_cmd" >&5 -+echo "${ECHO_T}$regex_cmd" >&6 - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - --test -n "$regex_cmd" && break -+ test -n "$regex_cmd" && break - done - - if test x$regex_cmd = "x"; then -- { echo "configure: error: error. sed is required to build the default menu file." 1>&2; exit 1; } -+ { { echo "$as_me:$LINENO: error: error. sed is required to build the default menu file." >&5 -+echo "$as_me: error: error. sed is required to build the default menu file." >&2;} -+ { (exit 1); exit 1; }; } - fi - --echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 --echo "configure:1259: checking how to run the C preprocessor" >&5 -+ -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 - # On Suns, sometimes $CPP names a directory. - if test -n "$CPP" && test -d "$CPP"; then - CPP= - fi - if test -z "$CPP"; then --if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ if test "${ac_cv_prog_CPP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- # This must be in double quotes, not single quotes, because CPP may get -- # substituted into the Makefile and "${CC-cc}" will confuse make. -- CPP="${CC-cc} -E" -+ # Double quotes because CPP needs to be expanded -+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" -+ do -+ ac_preproc_ok=false -+for ac_c_preproc_warn_flag in '' yes -+do -+ # Use a header file that comes with gcc, so configuring glibc -+ # with a fresh cross-compiler works. -+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, -- # not just through cpp. -- cat > conftest.$ac_ext <<EOF --#line 1274 "configure" --#include "confdefs.h" --#include <assert.h> --Syntax Error --EOF --ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" --{ (eval echo configure:1280: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } --ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` --if test -z "$ac_err"; then -+ # not just through cpp. "Syntax error" is here to catch this case. -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif -+ Syntax error -+_ACEOF -+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null; then -+ if test -s conftest.err; then -+ ac_cpp_err=$ac_c_preproc_warn_flag -+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+ else -+ ac_cpp_err= -+ fi -+else -+ ac_cpp_err=yes -+fi -+if test -z "$ac_cpp_err"; then - : - else -- echo "$ac_err" >&5 -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- CPP="${CC-cc} -E -traditional-cpp" -- cat > conftest.$ac_ext <<EOF --#line 1291 "configure" --#include "confdefs.h" --#include <assert.h> --Syntax Error --EOF --ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" --{ (eval echo configure:1297: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } --ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` --if test -z "$ac_err"; then -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ # Broken: fails on valid input. -+continue -+fi -+rm -f conftest.err conftest.$ac_ext -+ -+ # OK, works on sane cases. Now check whether non-existent headers -+ # can be detected and how. -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <ac_nonexistent.h> -+_ACEOF -+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null; then -+ if test -s conftest.err; then -+ ac_cpp_err=$ac_c_preproc_warn_flag -+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+ else -+ ac_cpp_err= -+ fi -+else -+ ac_cpp_err=yes -+fi -+if test -z "$ac_cpp_err"; then -+ # Broken: success on invalid input. -+continue -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ # Passes both tests. -+ac_preproc_ok=: -+break -+fi -+rm -f conftest.err conftest.$ac_ext -+ -+done -+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -+rm -f conftest.err conftest.$ac_ext -+if $ac_preproc_ok; then -+ break -+fi -+ -+ done -+ ac_cv_prog_CPP=$CPP -+ -+fi -+ CPP=$ac_cv_prog_CPP -+else -+ ac_cv_prog_CPP=$CPP -+fi -+echo "$as_me:$LINENO: result: $CPP" >&5 -+echo "${ECHO_T}$CPP" >&6 -+ac_preproc_ok=false -+for ac_c_preproc_warn_flag in '' yes -+do -+ # Use a header file that comes with gcc, so configuring glibc -+ # with a fresh cross-compiler works. -+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ # <limits.h> exists even on freestanding compilers. -+ # On the NeXT, cc -E runs the code through the compiler's parser, -+ # not just through cpp. "Syntax error" is here to catch this case. -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif -+ Syntax error -+_ACEOF -+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null; then -+ if test -s conftest.err; then -+ ac_cpp_err=$ac_c_preproc_warn_flag -+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+ else -+ ac_cpp_err= -+ fi -+else -+ ac_cpp_err=yes -+fi -+if test -z "$ac_cpp_err"; then -+ : -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ # Broken: fails on valid input. -+continue -+fi -+rm -f conftest.err conftest.$ac_ext -+ -+ # OK, works on sane cases. Now check whether non-existent headers -+ # can be detected and how. -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <ac_nonexistent.h> -+_ACEOF -+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null; then -+ if test -s conftest.err; then -+ ac_cpp_err=$ac_c_preproc_warn_flag -+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+ else -+ ac_cpp_err= -+ fi -+else -+ ac_cpp_err=yes -+fi -+if test -z "$ac_cpp_err"; then -+ # Broken: success on invalid input. -+continue -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ # Passes both tests. -+ac_preproc_ok=: -+break -+fi -+rm -f conftest.err conftest.$ac_ext -+ -+done -+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -+rm -f conftest.err conftest.$ac_ext -+if $ac_preproc_ok; then - : - else -- echo "$ac_err" >&5 -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- CPP="${CC-cc} -nologo -E" -- cat > conftest.$ac_ext <<EOF --#line 1308 "configure" --#include "confdefs.h" --#include <assert.h> --Syntax Error --EOF --ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" --{ (eval echo configure:1314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } --ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` --if test -z "$ac_err"; then -+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -+See \`config.log' for more details." >&5 -+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -+See \`config.log' for more details." >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ -+ -+echo "$as_me:$LINENO: checking for egrep" >&5 -+echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -+if test "${ac_cv_prog_egrep+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1 -+ then ac_cv_prog_egrep='grep -E' -+ else ac_cv_prog_egrep='egrep' -+ fi -+fi -+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -+echo "${ECHO_T}$ac_cv_prog_egrep" >&6 -+ EGREP=$ac_cv_prog_egrep -+ -+ -+echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -+if test "${ac_cv_header_stdc+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <stdlib.h> -+#include <stdarg.h> -+#include <string.h> -+#include <float.h> -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_header_stdc=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_header_stdc=no -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+if test $ac_cv_header_stdc = yes; then -+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <string.h> -+ -+_ACEOF -+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -+ $EGREP "memchr" >/dev/null 2>&1; then - : - else -- echo "$ac_err" >&5 -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- CPP=/lib/cpp -+ ac_cv_header_stdc=no - fi - rm -f conftest* -+ - fi --rm -f conftest* -+ -+if test $ac_cv_header_stdc = yes; then -+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <stdlib.h> -+ -+_ACEOF -+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -+ $EGREP "free" >/dev/null 2>&1; then -+ : -+else -+ ac_cv_header_stdc=no - fi - rm -f conftest* -- ac_cv_prog_CPP="$CPP" -+ - fi -- CPP="$ac_cv_prog_CPP" -+ -+if test $ac_cv_header_stdc = yes; then -+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -+ if test "$cross_compiling" = yes; then -+ : -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <ctype.h> -+#if ((' ' & 0x0FF) == 0x020) -+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -+#else -+# define ISLOWER(c) \ -+ (('a' <= (c) && (c) <= 'i') \ -+ || ('j' <= (c) && (c) <= 'r') \ -+ || ('s' <= (c) && (c) <= 'z')) -+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -+#endif -+ -+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -+int -+main () -+{ -+ int i; -+ for (i = 0; i < 256; i++) -+ if (XOR (islower (i), ISLOWER (i)) -+ || toupper (i) != TOUPPER (i)) -+ exit(2); -+ exit (0); -+} -+_ACEOF -+rm -f conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ : - else -- ac_cv_prog_CPP="$CPP" -+ echo "$as_me: program exited with status $ac_status" >&5 -+echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+( exit $ac_status ) -+ac_cv_header_stdc=no -+fi -+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -+fi -+fi - fi --echo "$ac_t""$CPP" 1>&6 -+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -+echo "${ECHO_T}$ac_cv_header_stdc" >&6 -+if test $ac_cv_header_stdc = yes; then -+ -+cat >>confdefs.h <<\_ACEOF -+#define STDC_HEADERS 1 -+_ACEOF - --for ac_hdr in ctype.h dirent.h fcntl.h libgen.h locale.h nl_types.h process.h signal.h stdarg.h stdio.h stdlib.h string.h time.h unistd.h sys/param.h sys/select.h sys/signal.h sys/stat.h sys/time.h sys/types.h sys/wait.h --do --ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` --echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 --echo "configure:1342: checking for $ac_hdr" >&5 --if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 1347 "configure" --#include "confdefs.h" --#include <$ac_hdr> --EOF --ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" --{ (eval echo configure:1352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } --ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` --if test -z "$ac_err"; then -- rm -rf conftest* -- eval "ac_cv_header_$ac_safe=yes" --else -- echo "$ac_err" >&5 -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_header_$ac_safe=no" - fi --rm -f conftest* -+ -+# On IRIX 5.3, sys/types and inttypes.h are conflicting. -+ -+ -+ -+ -+ -+ -+ -+ -+ -+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ -+ inttypes.h stdint.h unistd.h -+do -+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -+echo "$as_me:$LINENO: checking for $ac_header" >&5 -+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -+if eval "test \"\${$as_ac_Header+set}\" = set"; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+$ac_includes_default -+ -+#include <$ac_header> -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ eval "$as_ac_Header=yes" -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+eval "$as_ac_Header=no" -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+if test `eval echo '${'$as_ac_Header'}'` = yes; then -+ cat >>confdefs.h <<_ACEOF -+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+_ACEOF -+ -+fi -+ -+done -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+for ac_header in ctype.h dirent.h fcntl.h libgen.h locale.h nl_types.h process.h signal.h stdarg.h stdio.h stdlib.h string.h time.h unistd.h sys/param.h sys/select.h sys/signal.h sys/stat.h sys/time.h sys/types.h sys/wait.h -+do -+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -+if eval "test \"\${$as_ac_Header+set}\" = set"; then -+ echo "$as_me:$LINENO: checking for $ac_header" >&5 -+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -+if eval "test \"\${$as_ac_Header+set}\" = set"; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+fi -+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+else -+ # Is the header compilable? -+echo "$as_me:$LINENO: checking $ac_header usability" >&5 -+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+$ac_includes_default -+#include <$ac_header> -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_header_compiler=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_header_compiler=no -+fi -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -+echo "${ECHO_T}$ac_header_compiler" >&6 -+ -+# Is the header present? -+echo "$as_me:$LINENO: checking $ac_header presence" >&5 -+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <$ac_header> -+_ACEOF -+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null; then -+ if test -s conftest.err; then -+ ac_cpp_err=$ac_c_preproc_warn_flag -+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+ else -+ ac_cpp_err= -+ fi -+else -+ ac_cpp_err=yes - fi --if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` -- cat >> confdefs.h <<EOF --#define $ac_tr_hdr 1 --EOF -- --else -- echo "$ac_t""no" 1>&6 -+if test -z "$ac_cpp_err"; then -+ ac_header_preproc=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_header_preproc=no -+fi -+rm -f conftest.err conftest.$ac_ext -+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -+echo "${ECHO_T}$ac_header_preproc" >&6 -+ -+# So? What about this header? -+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in -+ yes:no: ) -+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} -+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} -+ ac_header_preproc=yes -+ ;; -+ no:yes:* ) -+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} -+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} -+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} -+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} -+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} -+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} -+ ( -+ cat <<\_ASBOX -+## ------------------------------------------ ## -+## Report this to the AC_PACKAGE_NAME lists. ## -+## ------------------------------------------ ## -+_ASBOX -+ ) | -+ sed "s/^/$as_me: WARNING: /" >&2 -+ ;; -+esac -+echo "$as_me:$LINENO: checking for $ac_header" >&5 -+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -+if eval "test \"\${$as_ac_Header+set}\" = set"; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ eval "$as_ac_Header=\$ac_header_preproc" -+fi -+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ -+fi -+if test `eval echo '${'$as_ac_Header'}'` = yes; then -+ cat >>confdefs.h <<_ACEOF -+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+_ACEOF -+ - fi -+ - done - --echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 --echo "configure:1379: checking whether time.h and sys/time.h may both be included" >&5 --if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 1384 "configure" --#include "confdefs.h" -+echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 -+echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 -+if test "${ac_cv_header_time+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - #include <sys/types.h> - #include <sys/time.h> - #include <time.h> --int main() { --struct tm *tp; --; return 0; } --EOF --if { (eval echo configure:1393: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then -- rm -rf conftest* -+ -+int -+main () -+{ -+if ((struct tm *) 0) -+return 0; -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then - ac_cv_header_time=yes - else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- ac_cv_header_time=no -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_header_time=no - fi --rm -f conftest* -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - fi -- --echo "$ac_t""$ac_cv_header_time" 1>&6 -+echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 -+echo "${ECHO_T}$ac_cv_header_time" >&6 - if test $ac_cv_header_time = yes; then -- cat >> confdefs.h <<\EOF -+ -+cat >>confdefs.h <<\_ACEOF - #define TIME_WITH_SYS_TIME 1 --EOF -+_ACEOF - - fi - - -+ - for ac_func in basename - do --echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 --echo "configure:1417: checking for $ac_func" >&5 --if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 1422 "configure" --#include "confdefs.h" -+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -+echo "$as_me:$LINENO: checking for $ac_func" >&5 -+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -+if eval "test \"\${$as_ac_var+set}\" = set"; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. -+ For example, HP-UX 11i <limits.h> declares gettimeofday. */ -+#define $ac_func innocuous_$ac_func -+ - /* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char $ac_func(); below. */ --#include <assert.h> -+ which can conflict with char $ac_func (); below. -+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ <limits.h> exists even on freestanding compilers. */ -+ -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif -+ -+#undef $ac_func -+ - /* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+{ -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char $ac_func (); -+/* The GNU C library defines this for functions which it implements -+ to always fail with ENOSYS. Some functions are actually named -+ something starting with __ and the normal name is an alias. */ -+#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -+choke me -+#else -+char (*f) () = $ac_func; -+#endif -+#ifdef __cplusplus -+} -+#endif -+ -+int -+main () -+{ -+return f != $ac_func; -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ eval "$as_ac_var=yes" -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+eval "$as_ac_var=no" -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -+if test `eval echo '${'$as_ac_var'}'` = yes; then -+ cat >>confdefs.h <<_ACEOF -+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -+_ACEOF -+ -+else -+ echo "$as_me:$LINENO: checking for basename in -lgen" >&5 -+echo $ECHO_N "checking for basename in -lgen... $ECHO_C" >&6 -+if test "${ac_cv_lib_gen_basename+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lgen $LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char basename (); -+int -+main () -+{ -+basename (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_gen_basename=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_gen_basename=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_gen_basename" >&5 -+echo "${ECHO_T}$ac_cv_lib_gen_basename" >&6 -+if test $ac_cv_lib_gen_basename = yes; then -+ cat >>confdefs.h <<\_ACEOF -+#define HAVE_BASENAME 1 -+_ACEOF -+ LIBS="$LIBS -lgen" -+fi -+ -+fi -+done -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+for ac_func in getpid setlocale sigaction strftime strcasestr snprintf vsnprintf catopen catgets catclose -+do -+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -+echo "$as_me:$LINENO: checking for $ac_func" >&5 -+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -+if eval "test \"\${$as_ac_var+set}\" = set"; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. -+ For example, HP-UX 11i <limits.h> declares gettimeofday. */ -+#define $ac_func innocuous_$ac_func -+ -+/* System header to define __stub macros and hopefully few prototypes, -+ which can conflict with char $ac_func (); below. -+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ <limits.h> exists even on freestanding compilers. */ -+ -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif -+ -+#undef $ac_func -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+{ -+#endif - /* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char $ac_func(); -+ builtin and then its argument prototype would still apply. */ -+char $ac_func (); -+/* The GNU C library defines this for functions which it implements -+ to always fail with ENOSYS. Some functions are actually named -+ something starting with __ and the normal name is an alias. */ -+#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -+choke me -+#else -+char (*f) () = $ac_func; -+#endif -+#ifdef __cplusplus -+} -+#endif - --int main() { -+int -+main () -+{ -+return f != $ac_func; -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ eval "$as_ac_var=yes" -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+eval "$as_ac_var=no" -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -+if test `eval echo '${'$as_ac_var'}'` = yes; then -+ cat >>confdefs.h <<_ACEOF -+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -+_ACEOF -+ -+fi -+done -+ -+echo "$as_me:$LINENO: checking for t_open in -lnsl" >&5 -+echo $ECHO_N "checking for t_open in -lnsl... $ECHO_C" >&6 -+if test "${ac_cv_lib_nsl_t_open+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lnsl $LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char t_open (); -+int -+main () -+{ -+t_open (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_nsl_t_open=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_nsl_t_open=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_t_open" >&5 -+echo "${ECHO_T}$ac_cv_lib_nsl_t_open" >&6 -+if test $ac_cv_lib_nsl_t_open = yes; then -+ LIBS="$LIBS -lnsl" -+fi -+ -+echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 -+echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6 -+if test "${ac_cv_lib_socket_socket+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lsocket $LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char socket (); -+int -+main () -+{ -+socket (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_socket_socket=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_socket_socket=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 -+echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6 -+if test $ac_cv_lib_socket_socket = yes; then -+ LIBS="$LIBS -lsocket" -+fi -+ -+ -+echo "$as_me:$LINENO: checking for X" >&5 -+echo $ECHO_N "checking for X... $ECHO_C" >&6 -+ -+ac_path_x_has_been_run=yes -+ -+# Check whether --with-x or --without-x was given. -+if test "${with_x+set}" = set; then -+ withval="$with_x" -+ -+fi; -+# $have_x is `yes', `no', `disabled', or empty when we do not yet know. -+if test "x$with_x" = xno; then -+ # The user explicitly disabled X. -+ have_x=disabled -+else -+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then -+ # Both variables are already set. -+ have_x=yes -+ else -+ if test "${ac_cv_have_x+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ # One or both of the vars are not set, and there is no cached value. -+ac_x_includes=no ac_x_libraries=no -+rm -fr conftest.dir -+if mkdir conftest.dir; then -+ cd conftest.dir -+ # Make sure to not put "make" in the Imakefile rules, since we grep it out. -+ cat >Imakefile <<'_ACEOF' -+acfindx: -+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -+_ACEOF -+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then -+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us. -+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` -+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. -+ for ac_extension in a so sl; do -+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && -+ test -f $ac_im_libdir/libX11.$ac_extension; then -+ ac_im_usrlibdir=$ac_im_libdir; break -+ fi -+ done -+ # Screen out bogus values from the imake configuration. They are -+ # bogus both because they are the default anyway, and because -+ # using them would break gcc on systems where it needs fixed includes. -+ case $ac_im_incroot in -+ /usr/include) ;; -+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; -+ esac -+ case $ac_im_usrlibdir in -+ /usr/lib | /lib) ;; -+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; -+ esac -+ fi -+ cd .. -+ rm -fr conftest.dir -+fi - --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_$ac_func) || defined (__stub___$ac_func) --choke me --#else --$ac_func(); --#endif -+# Standard set of common directories for X headers. -+# Check X11 before X11Rn because it is often a symlink to the current release. -+ac_x_header_dirs=' -+/usr/X11/include -+/usr/X11R6/include -+/usr/X11R5/include -+/usr/X11R4/include -+ -+/usr/include/X11 -+/usr/include/X11R6 -+/usr/include/X11R5 -+/usr/include/X11R4 -+ -+/usr/local/X11/include -+/usr/local/X11R6/include -+/usr/local/X11R5/include -+/usr/local/X11R4/include -+ -+/usr/local/include/X11 -+/usr/local/include/X11R6 -+/usr/local/include/X11R5 -+/usr/local/include/X11R4 -+ -+/usr/X386/include -+/usr/x386/include -+/usr/XFree86/include/X11 -+ -+/usr/include -+/usr/local/include -+/usr/unsupported/include -+/usr/athena/include -+/usr/local/x11r5/include -+/usr/lpp/Xamples/include - --; return 0; } --EOF --if { (eval echo configure:1445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_func_$ac_func=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_func_$ac_func=no" --fi --rm -f conftest* --fi -+/usr/openwin/include -+/usr/openwin/share/include' - --if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` -- cat >> confdefs.h <<EOF --#define $ac_tr_func 1 --EOF -- --else -- echo "$ac_t""no" 1>&6 --echo $ac_n "checking for basename in -lgen""... $ac_c" 1>&6 --echo "configure:1467: checking for basename in -lgen" >&5 --ac_lib_var=`echo gen'_'basename | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+if test "$ac_x_includes" = no; then -+ # Guess where to find include files, by looking for a specified header file. -+ # First, try using that file with no special directory specified. -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <X11/Intrinsic.h> -+_ACEOF -+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null; then -+ if test -s conftest.err; then -+ ac_cpp_err=$ac_c_preproc_warn_flag -+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+ else -+ ac_cpp_err= -+ fi - else -- ac_save_LIBS="$LIBS" --LIBS="-lgen $LIBS" --cat > conftest.$ac_ext <<EOF --#line 1475 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char basename(); -- --int main() { --basename() --; return 0; } --EOF --if { (eval echo configure:1486: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" -+ ac_cpp_err=yes - fi --rm -f conftest* --LIBS="$ac_save_LIBS" -- --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- cat >> confdefs.h <<\EOF --#define HAVE_BASENAME 1 --EOF -- LIBS="$LIBS -lgen" -+if test -z "$ac_cpp_err"; then -+ # We can compile using X headers with no special include directory. -+ac_x_includes= - else -- echo "$ac_t""no" 1>&6 --fi -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --fi -+ for ac_dir in $ac_x_header_dirs; do -+ if test -r "$ac_dir/X11/Intrinsic.h"; then -+ ac_x_includes=$ac_dir -+ break -+ fi - done -- --for ac_func in getpid setlocale sigaction strftime strcasestr snprintf vsnprintf catopen catgets catclose --do --echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 --echo "configure:1515: checking for $ac_func" >&5 --if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 1520 "configure" --#include "confdefs.h" --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char $ac_func(); below. */ --#include <assert.h> --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char $ac_func(); -- --int main() { -- --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_$ac_func) || defined (__stub___$ac_func) --choke me --#else --$ac_func(); --#endif -- --; return 0; } --EOF --if { (eval echo configure:1543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_func_$ac_func=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_func_$ac_func=no" --fi --rm -f conftest* - fi -+rm -f conftest.err conftest.$ac_ext -+fi # $ac_x_includes = no - --if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` -- cat >> confdefs.h <<EOF --#define $ac_tr_func 1 --EOF -- -+if test "$ac_x_libraries" = no; then -+ # Check for the libraries. -+ # See if we find them without any special options. -+ # Don't add to $LIBS permanently. -+ ac_save_LIBS=$LIBS -+ LIBS="-lXt $LIBS" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <X11/Intrinsic.h> -+int -+main () -+{ -+XtMalloc (0) -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ LIBS=$ac_save_LIBS -+# We can link X programs with no special library path. -+ac_x_libraries= - else -- echo "$ac_t""no" 1>&6 --fi --done -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --echo $ac_n "checking for t_open in -lnsl""... $ac_c" 1>&6 --echo "configure:1568: checking for t_open in -lnsl" >&5 --ac_lib_var=`echo nsl'_'t_open | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- ac_save_LIBS="$LIBS" --LIBS="-lnsl $LIBS" --cat > conftest.$ac_ext <<EOF --#line 1576 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char t_open(); -- --int main() { --t_open() --; return 0; } --EOF --if { (eval echo configure:1587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" -+LIBS=$ac_save_LIBS -+for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` -+do -+ # Don't even attempt the hair of trying to link an X program! -+ for ac_extension in a so sl; do -+ if test -r $ac_dir/libXt.$ac_extension; then -+ ac_x_libraries=$ac_dir -+ break 2 -+ fi -+ done -+done - fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi # $ac_x_libraries = no - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- LIBS="$LIBS -lnsl" -+if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then -+ # Didn't find X anywhere. Cache the known absence of X. -+ ac_cv_have_x="have_x=no" - else -- echo "$ac_t""no" 1>&6 -+ # Record where we found X for the cache. -+ ac_cv_have_x="have_x=yes \ -+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" - fi -- --echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6 --echo "configure:1608: checking for socket in -lsocket" >&5 --ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- ac_save_LIBS="$LIBS" --LIBS="-lsocket $LIBS" --cat > conftest.$ac_ext <<EOF --#line 1616 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char socket(); -- --int main() { --socket() --; return 0; } --EOF --if { (eval echo configure:1627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" - fi --rm -f conftest* --LIBS="$ac_save_LIBS" - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- LIBS="$LIBS -lsocket" -+ fi -+ eval "$ac_cv_have_x" -+fi # $with_x != no -+ -+if test "$have_x" != yes; then -+ echo "$as_me:$LINENO: result: $have_x" >&5 -+echo "${ECHO_T}$have_x" >&6 -+ no_x=yes - else -- echo "$ac_t""no" 1>&6 -+ # If each of the values was on the command line, it overrides each guess. -+ test "x$x_includes" = xNONE && x_includes=$ac_x_includes -+ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries -+ # Update the cache value to reflect the command line values. -+ ac_cv_have_x="have_x=yes \ -+ ac_x_includes=$x_includes ac_x_libraries=$x_libraries" -+ # It might be that x_includes is empty (headers are found in the -+ # standard search path. Then output the corresponding message -+ ac_out_x_includes=$x_includes -+ test "x$x_includes" = x && ac_out_x_includes="in standard search path" -+ echo "$as_me:$LINENO: result: libraries $x_libraries, headers $ac_out_x_includes" >&5 -+echo "${ECHO_T}libraries $x_libraries, headers $ac_out_x_includes" >&6 - fi - - --# If we find X, set shell vars x_includes and x_libraries to the --# paths, otherwise set no_x=yes. --# Uses ac_ vars as temps to allow command line to override cache and checks. --# --without-x overrides everything else, but does not touch the cache. --echo $ac_n "checking for X""... $ac_c" 1>&6 --echo "configure:1653: checking for X" >&5 -+if test "x$ac_path_x_has_been_run" != xyes; then -+ echo "$as_me:$LINENO: checking for X" >&5 -+echo $ECHO_N "checking for X... $ECHO_C" >&6 -+ -+ac_path_x_has_been_run=yes - - # Check whether --with-x or --without-x was given. - if test "${with_x+set}" = set; then - withval="$with_x" -- : --fi - -+fi; - # $have_x is `yes', `no', `disabled', or empty when we do not yet know. - if test "x$with_x" = xno; then - # The user explicitly disabled X. -@@ -1666,207 +4404,209 @@ - # Both variables are already set. - have_x=yes - else --if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ if test "${ac_cv_have_x+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - # One or both of the vars are not set, and there is no cached value. --ac_x_includes=NO ac_x_libraries=NO --rm -fr conftestdir --if mkdir conftestdir; then -- cd conftestdir -+ac_x_includes=no ac_x_libraries=no -+rm -fr conftest.dir -+if mkdir conftest.dir; then -+ cd conftest.dir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. -- cat > Imakefile <<'EOF' -+ cat >Imakefile <<'_ACEOF' - acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' --EOF -+_ACEOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && -- test -f $ac_im_libdir/libX11.$ac_extension; then -- ac_im_usrlibdir=$ac_im_libdir; break -+ test -f $ac_im_libdir/libX11.$ac_extension; then -+ ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. They are - # bogus both because they are the default anyway, and because - # using them would break gcc on systems where it needs fixed includes. -- case "$ac_im_incroot" in -+ case $ac_im_incroot in - /usr/include) ;; -- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; -+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; - esac -- case "$ac_im_usrlibdir" in -+ case $ac_im_usrlibdir in - /usr/lib | /lib) ;; -- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; -+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; - esac - fi - cd .. -- rm -fr conftestdir -+ rm -fr conftest.dir - fi - --if test "$ac_x_includes" = NO; then -- # Guess where to find include files, by looking for this one X11 .h file. -- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h -+# Standard set of common directories for X headers. -+# Check X11 before X11Rn because it is often a symlink to the current release. -+ac_x_header_dirs=' -+/usr/X11/include -+/usr/X11R6/include -+/usr/X11R5/include -+/usr/X11R4/include -+ -+/usr/include/X11 -+/usr/include/X11R6 -+/usr/include/X11R5 -+/usr/include/X11R4 -+ -+/usr/local/X11/include -+/usr/local/X11R6/include -+/usr/local/X11R5/include -+/usr/local/X11R4/include -+ -+/usr/local/include/X11 -+/usr/local/include/X11R6 -+/usr/local/include/X11R5 -+/usr/local/include/X11R4 -+ -+/usr/X386/include -+/usr/x386/include -+/usr/XFree86/include/X11 -+ -+/usr/include -+/usr/local/include -+/usr/unsupported/include -+/usr/athena/include -+/usr/local/x11r5/include -+/usr/lpp/Xamples/include -+ -+/usr/openwin/include -+/usr/openwin/share/include' - -+if test "$ac_x_includes" = no; then -+ # Guess where to find include files, by looking for a specified header file. - # First, try using that file with no special directory specified. --cat > conftest.$ac_ext <<EOF --#line 1715 "configure" --#include "confdefs.h" --#include <$x_direct_test_include> --EOF --ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" --{ (eval echo configure:1720: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } --ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` --if test -z "$ac_err"; then -- rm -rf conftest* -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <X11/Intrinsic.h> -+_ACEOF -+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } >/dev/null; then -+ if test -s conftest.err; then -+ ac_cpp_err=$ac_c_preproc_warn_flag -+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+ else -+ ac_cpp_err= -+ fi -+else -+ ac_cpp_err=yes -+fi -+if test -z "$ac_cpp_err"; then - # We can compile using X headers with no special include directory. - ac_x_includes= - else -- echo "$ac_err" >&5 -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- # Look for the header file in a standard set of common directories. --# Check X11 before X11Rn because it is often a symlink to the current release. -- for ac_dir in \ -- /usr/X11/include \ -- /usr/X11R6/include \ -- /usr/X11R5/include \ -- /usr/X11R4/include \ -- \ -- /usr/include/X11 \ -- /usr/include/X11R6 \ -- /usr/include/X11R5 \ -- /usr/include/X11R4 \ -- \ -- /usr/local/X11/include \ -- /usr/local/X11R6/include \ -- /usr/local/X11R5/include \ -- /usr/local/X11R4/include \ -- \ -- /usr/local/include/X11 \ -- /usr/local/include/X11R6 \ -- /usr/local/include/X11R5 \ -- /usr/local/include/X11R4 \ -- \ -- /usr/X386/include \ -- /usr/x386/include \ -- /usr/XFree86/include/X11 \ -- \ -- /usr/include \ -- /usr/local/include \ -- /usr/unsupported/include \ -- /usr/athena/include \ -- /usr/local/x11r5/include \ -- /usr/lpp/Xamples/include \ -- \ -- /usr/openwin/include \ -- /usr/openwin/share/include \ -- ; \ -- do -- if test -r "$ac_dir/$x_direct_test_include"; then -- ac_x_includes=$ac_dir -- break -- fi -- done -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ for ac_dir in $ac_x_header_dirs; do -+ if test -r "$ac_dir/X11/Intrinsic.h"; then -+ ac_x_includes=$ac_dir -+ break -+ fi -+done - fi --rm -f conftest* --fi # $ac_x_includes = NO -+rm -f conftest.err conftest.$ac_ext -+fi # $ac_x_includes = no - --if test "$ac_x_libraries" = NO; then -+if test "$ac_x_libraries" = no; then - # Check for the libraries. -- -- test -z "$x_direct_test_library" && x_direct_test_library=Xt -- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc -- - # See if we find them without any special options. - # Don't add to $LIBS permanently. -- ac_save_LIBS="$LIBS" -- LIBS="-l$x_direct_test_library $LIBS" --cat > conftest.$ac_ext <<EOF --#line 1789 "configure" --#include "confdefs.h" -- --int main() { --${x_direct_test_function}() --; return 0; } --EOF --if { (eval echo configure:1796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- LIBS="$ac_save_LIBS" -+ ac_save_LIBS=$LIBS -+ LIBS="-lXt $LIBS" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <X11/Intrinsic.h> -+int -+main () -+{ -+XtMalloc (0) -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ LIBS=$ac_save_LIBS - # We can link X programs with no special library path. - ac_x_libraries= - else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- LIBS="$ac_save_LIBS" --# First see if replacing the include by lib works. --# Check X11 before X11Rn because it is often a symlink to the current release. --for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ -- /usr/X11/lib \ -- /usr/X11R6/lib \ -- /usr/X11R5/lib \ -- /usr/X11R4/lib \ -- \ -- /usr/lib/X11 \ -- /usr/lib/X11R6 \ -- /usr/lib/X11R5 \ -- /usr/lib/X11R4 \ -- \ -- /usr/local/X11/lib \ -- /usr/local/X11R6/lib \ -- /usr/local/X11R5/lib \ -- /usr/local/X11R4/lib \ -- \ -- /usr/local/lib/X11 \ -- /usr/local/lib/X11R6 \ -- /usr/local/lib/X11R5 \ -- /usr/local/lib/X11R4 \ -- \ -- /usr/X386/lib \ -- /usr/x386/lib \ -- /usr/XFree86/lib/X11 \ -- \ -- /usr/lib \ -- /usr/local/lib \ -- /usr/unsupported/lib \ -- /usr/athena/lib \ -- /usr/local/x11r5/lib \ -- /usr/lpp/Xamples/lib \ -- /lib/usr/lib/X11 \ -- \ -- /usr/openwin/lib \ -- /usr/openwin/share/lib \ -- ; \ -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+LIBS=$ac_save_LIBS -+for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` - do -+ # Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do -- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then -+ if test -r $ac_dir/libXt.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done - done - fi --rm -f conftest* --fi # $ac_x_libraries = NO -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi # $ac_x_libraries = no - --if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then -+if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then - # Didn't find X anywhere. Cache the known absence of X. - ac_cv_have_x="have_x=no" - else - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes \ -- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" -+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" - fi - fi -+ - fi - eval "$ac_cv_have_x" - fi # $with_x != no - - if test "$have_x" != yes; then -- echo "$ac_t""$have_x" 1>&6 -+ echo "$as_me:$LINENO: result: $have_x" >&5 -+echo "${ECHO_T}$have_x" >&6 - no_x=yes - else - # If each of the values was on the command line, it overrides each guess. -@@ -1875,14 +4615,21 @@ - # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$x_includes ac_x_libraries=$x_libraries" -- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 -+ # It might be that x_includes is empty (headers are found in the -+ # standard search path. Then output the corresponding message -+ ac_out_x_includes=$x_includes -+ test "x$x_includes" = x && ac_out_x_includes="in standard search path" -+ echo "$as_me:$LINENO: result: libraries $x_libraries, headers $ac_out_x_includes" >&5 -+echo "${ECHO_T}libraries $x_libraries, headers $ac_out_x_includes" >&6 - fi - -+fi - if test "$no_x" = yes; then - # Not all programs may use this symbol, but it does not hurt to define it. -- cat >> confdefs.h <<\EOF -+ -+cat >>confdefs.h <<\_ACEOF - #define X_DISPLAY_MISSING 1 --EOF -+_ACEOF - - X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= - else -@@ -1895,60 +4642,117 @@ - X_LIBS="$X_LIBS -L$x_libraries" - # For Solaris; some versions of Sun CC require a space after -R and - # others require no space. Words are not sufficient . . . . -- case "`(uname -sr) 2>/dev/null`" in -+ case `(uname -sr) 2>/dev/null` in - "SunOS 5"*) -- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6 --echo "configure:1902: checking whether -R must be followed by a space" >&5 -- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries" -- cat > conftest.$ac_ext <<EOF --#line 1905 "configure" --#include "confdefs.h" -- --int main() { -- --; return 0; } --EOF --if { (eval echo configure:1912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -+ echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 -+echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6 -+ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then - ac_R_nospace=yes - else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- ac_R_nospace=no -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_R_nospace=no - fi --rm -f conftest* -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext - if test $ac_R_nospace = yes; then -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - X_LIBS="$X_LIBS -R$x_libraries" - else - LIBS="$ac_xsave_LIBS -R $x_libraries" -- cat > conftest.$ac_ext <<EOF --#line 1928 "configure" --#include "confdefs.h" -- --int main() { -- --; return 0; } --EOF --if { (eval echo configure:1935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then - ac_R_space=yes - else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- ac_R_space=no -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_R_space=no - fi --rm -f conftest* -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext - if test $ac_R_space = yes; then -- echo "$ac_t""yes" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - X_LIBS="$X_LIBS -R $x_libraries" - else -- echo "$ac_t""neither works" 1>&6 -+ echo "$as_me:$LINENO: result: neither works" >&5 -+echo "${ECHO_T}neither works" >&6 - fi - fi -- LIBS="$ac_xsave_LIBS" -+ LIBS=$ac_xsave_LIBS - esac - fi - -@@ -1959,527 +4763,1010 @@ - if test "$ISC" = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" - else -- # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X -- # libraries were built with DECnet support. And karl@cs.umb.edu says -+ # Martyn Johnson says this is needed for Ultrix, if the X -+ # libraries were built with DECnet support. And Karl Berry says - # the Alpha needs dnet_stub (dnet does not exist). -- echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6 --echo "configure:1967: checking for dnet_ntoa in -ldnet" >&5 --ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char XOpenDisplay (); -+int -+main () -+{ -+XOpenDisplay (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ : -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 -+echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6 -+if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-ldnet $LIBS" --cat > conftest.$ac_ext <<EOF --#line 1975 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dnet_ntoa(); -- --int main() { --dnet_ntoa() --; return 0; } --EOF --if { (eval echo configure:1986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char dnet_ntoa (); -+int -+main () -+{ -+dnet_ntoa (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_dnet_dnet_ntoa=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_dnet_dnet_ntoa=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 -+echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6 -+if test $ac_cv_lib_dnet_dnet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" --else -- echo "$ac_t""no" 1>&6 - fi - - if test $ac_cv_lib_dnet_dnet_ntoa = no; then -- echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 --echo "configure:2008: checking for dnet_ntoa in -ldnet_stub" >&5 --ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 -+echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6 -+if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-ldnet_stub $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2016 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dnet_ntoa(); -- --int main() { --dnet_ntoa() --; return 0; } --EOF --if { (eval echo configure:2027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char dnet_ntoa (); -+int -+main () -+{ -+dnet_ntoa (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_dnet_stub_dnet_ntoa=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_dnet_stub_dnet_ntoa=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 -+echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6 -+if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" --else -- echo "$ac_t""no" 1>&6 - fi - - fi -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+ LIBS="$ac_xsave_LIBS" - - # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, - # to get the SysV transport functions. -- # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4) -+ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) - # needs -lnsl. - # The nsl library prevents programs from opening the X display -- # on Irix 5.2, according to dickey@clark.net. -- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 --echo "configure:2056: checking for gethostbyname" >&5 --if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 2061 "configure" --#include "confdefs.h" -+ # on Irix 5.2, according to T.E. Dickey. -+ # The functions gethostbyname, getservbyname, and inet_addr are -+ # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. -+ echo "$as_me:$LINENO: checking for gethostbyname" >&5 -+echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 -+if test "${ac_cv_func_gethostbyname+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+/* Define gethostbyname to an innocuous variant, in case <limits.h> declares gethostbyname. -+ For example, HP-UX 11i <limits.h> declares gettimeofday. */ -+#define gethostbyname innocuous_gethostbyname -+ - /* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char gethostbyname(); below. */ --#include <assert.h> --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char gethostbyname(); -+ which can conflict with char gethostbyname (); below. -+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ <limits.h> exists even on freestanding compilers. */ - --int main() { -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif - -+#undef gethostbyname -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+{ -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char gethostbyname (); - /* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ - #if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) - choke me - #else --gethostbyname(); -+char (*f) () = gethostbyname; -+#endif -+#ifdef __cplusplus -+} - #endif - --; return 0; } --EOF --if { (eval echo configure:2084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_func_gethostbyname=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_func_gethostbyname=no" --fi --rm -f conftest* --fi -+int -+main () -+{ -+return f != gethostbyname; -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_func_gethostbyname=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- : --else -- echo "$ac_t""no" 1>&6 -+ac_cv_func_gethostbyname=no - fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 -+echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 - - if test $ac_cv_func_gethostbyname = no; then -- echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 --echo "configure:2105: checking for gethostbyname in -lnsl" >&5 --ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 -+echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 -+if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-lnsl $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2113 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char gethostbyname(); -- --int main() { --gethostbyname() --; return 0; } --EOF --if { (eval echo configure:2124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char gethostbyname (); -+int -+main () -+{ -+gethostbyname (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_nsl_gethostbyname=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_nsl_gethostbyname=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 -+echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 -+if test $ac_cv_lib_nsl_gethostbyname = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" --else -- echo "$ac_t""no" 1>&6 - fi - -+ if test $ac_cv_lib_nsl_gethostbyname = no; then -+ echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 -+echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6 -+if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lbsd $LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char gethostbyname (); -+int -+main () -+{ -+gethostbyname (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_bsd_gethostbyname=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_bsd_gethostbyname=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 -+echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6 -+if test $ac_cv_lib_bsd_gethostbyname = yes; then -+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" -+fi -+ -+ fi - fi - - # lieder@skyler.mavd.honeywell.com says without -lsocket, - # socket/setsockopt and other routines are undefined under SCO ODT - # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary -- # on later versions), says simon@lia.di.epfl.ch: it contains -- # gethostby* variants that don't use the nameserver (or something). -- # -lsocket must be given before -lnsl if both are needed. -- # We assume that if connect needs -lnsl, so does gethostbyname. -- echo $ac_n "checking for connect""... $ac_c" 1>&6 --echo "configure:2154: checking for connect" >&5 --if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 2159 "configure" --#include "confdefs.h" -+ # on later versions), says Simon Leinen: it contains gethostby* -+ # variants that don't use the name server (or something). -lsocket -+ # must be given before -lnsl if both are needed. We assume that -+ # if connect needs -lnsl, so does gethostbyname. -+ echo "$as_me:$LINENO: checking for connect" >&5 -+echo $ECHO_N "checking for connect... $ECHO_C" >&6 -+if test "${ac_cv_func_connect+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+/* Define connect to an innocuous variant, in case <limits.h> declares connect. -+ For example, HP-UX 11i <limits.h> declares gettimeofday. */ -+#define connect innocuous_connect -+ - /* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char connect(); below. */ --#include <assert.h> --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char connect(); -+ which can conflict with char connect (); below. -+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ <limits.h> exists even on freestanding compilers. */ -+ -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif - --int main() { -+#undef connect - -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+{ -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char connect (); - /* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ - #if defined (__stub_connect) || defined (__stub___connect) - choke me - #else --connect(); -+char (*f) () = connect; -+#endif -+#ifdef __cplusplus -+} - #endif - --; return 0; } --EOF --if { (eval echo configure:2182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_func_connect=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_func_connect=no" --fi --rm -f conftest* --fi -+int -+main () -+{ -+return f != connect; -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_func_connect=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- : --else -- echo "$ac_t""no" 1>&6 -+ac_cv_func_connect=no - fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 -+echo "${ECHO_T}$ac_cv_func_connect" >&6 - - if test $ac_cv_func_connect = no; then -- echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 --echo "configure:2203: checking for connect in -lsocket" >&5 --ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 -+echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 -+if test "${ac_cv_lib_socket_connect+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-lsocket $X_EXTRA_LIBS $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2211 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char connect(); -- --int main() { --connect() --; return 0; } --EOF --if { (eval echo configure:2222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char connect (); -+int -+main () -+{ -+connect (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_socket_connect=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_socket_connect=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 -+echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 -+if test $ac_cv_lib_socket_connect = yes; then - X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" --else -- echo "$ac_t""no" 1>&6 - fi - - fi - -- # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX. -- echo $ac_n "checking for remove""... $ac_c" 1>&6 --echo "configure:2246: checking for remove" >&5 --if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 2251 "configure" --#include "confdefs.h" -+ # Guillermo Gomez says -lposix is necessary on A/UX. -+ echo "$as_me:$LINENO: checking for remove" >&5 -+echo $ECHO_N "checking for remove... $ECHO_C" >&6 -+if test "${ac_cv_func_remove+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+/* Define remove to an innocuous variant, in case <limits.h> declares remove. -+ For example, HP-UX 11i <limits.h> declares gettimeofday. */ -+#define remove innocuous_remove -+ - /* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char remove(); below. */ --#include <assert.h> --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char remove(); -+ which can conflict with char remove (); below. -+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ <limits.h> exists even on freestanding compilers. */ - --int main() { -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif - -+#undef remove -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+{ -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char remove (); - /* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ - #if defined (__stub_remove) || defined (__stub___remove) - choke me - #else --remove(); -+char (*f) () = remove; -+#endif -+#ifdef __cplusplus -+} - #endif - --; return 0; } --EOF --if { (eval echo configure:2274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_func_remove=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_func_remove=no" --fi --rm -f conftest* --fi -+int -+main () -+{ -+return f != remove; -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_func_remove=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- : --else -- echo "$ac_t""no" 1>&6 -+ac_cv_func_remove=no - fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 -+echo "${ECHO_T}$ac_cv_func_remove" >&6 - - if test $ac_cv_func_remove = no; then -- echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 --echo "configure:2295: checking for remove in -lposix" >&5 --ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ echo "$as_me:$LINENO: checking for remove in -lposix" >&5 -+echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6 -+if test "${ac_cv_lib_posix_remove+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-lposix $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2303 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char remove(); -- --int main() { --remove() --; return 0; } --EOF --if { (eval echo configure:2314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char remove (); -+int -+main () -+{ -+remove (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_posix_remove=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_posix_remove=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 -+echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6 -+if test $ac_cv_lib_posix_remove = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" --else -- echo "$ac_t""no" 1>&6 - fi - - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. -- echo $ac_n "checking for shmat""... $ac_c" 1>&6 --echo "configure:2338: checking for shmat" >&5 --if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 2343 "configure" --#include "confdefs.h" -+ echo "$as_me:$LINENO: checking for shmat" >&5 -+echo $ECHO_N "checking for shmat... $ECHO_C" >&6 -+if test "${ac_cv_func_shmat+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+/* Define shmat to an innocuous variant, in case <limits.h> declares shmat. -+ For example, HP-UX 11i <limits.h> declares gettimeofday. */ -+#define shmat innocuous_shmat -+ - /* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char shmat(); below. */ --#include <assert.h> --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char shmat(); -+ which can conflict with char shmat (); below. -+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since -+ <limits.h> exists even on freestanding compilers. */ -+ -+#ifdef __STDC__ -+# include <limits.h> -+#else -+# include <assert.h> -+#endif - --int main() { -+#undef shmat - -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+{ -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char shmat (); - /* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ - #if defined (__stub_shmat) || defined (__stub___shmat) - choke me - #else --shmat(); -+char (*f) () = shmat; -+#endif -+#ifdef __cplusplus -+} - #endif - --; return 0; } --EOF --if { (eval echo configure:2366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_func_shmat=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_func_shmat=no" --fi --rm -f conftest* --fi -+int -+main () -+{ -+return f != shmat; -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_func_shmat=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 - --if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- : --else -- echo "$ac_t""no" 1>&6 -+ac_cv_func_shmat=no - fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi -+echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 -+echo "${ECHO_T}$ac_cv_func_shmat" >&6 - - if test $ac_cv_func_shmat = no; then -- echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 --echo "configure:2387: checking for shmat in -lipc" >&5 --ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 -+echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6 -+if test "${ac_cv_lib_ipc_shmat+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-lipc $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2395 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char shmat(); -- --int main() { --shmat() --; return 0; } --EOF --if { (eval echo configure:2406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char shmat (); -+int -+main () -+{ -+shmat (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_ipc_shmat=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_ipc_shmat=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 -+echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6 -+if test $ac_cv_lib_ipc_shmat = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" --else -- echo "$ac_t""no" 1>&6 - fi - - fi - fi - - # Check for libraries that X11R6 Xt/Xaw programs need. -- ac_save_LDFLAGS="$LDFLAGS" -+ ac_save_LDFLAGS=$LDFLAGS - test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" - # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to - # check for ICE first), but we must link in the order -lSM -lICE or - # we get undefined symbols. So assume we have SM if we have ICE. - # These have to be linked with before -lX11, unlike the other - # libraries we check for below, so use a different variable. -- # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -- echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 --echo "configure:2439: checking for IceConnectionNumber in -lICE" >&5 --ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ # John Interrante, Karl Berry -+ echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 -+echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6 -+if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" --LIBS="-lICE $X_EXTRA_LIBS $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2447 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char IceConnectionNumber(); -- --int main() { --IceConnectionNumber() --; return 0; } --EOF --if { (eval echo configure:2458: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lICE $X_EXTRA_LIBS $LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char IceConnectionNumber (); -+int -+main () -+{ -+IceConnectionNumber (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_ICE_IceConnectionNumber=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_ICE_IceConnectionNumber=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 -+echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6 -+if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then - X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" --else -- echo "$ac_t""no" 1>&6 - fi - -- LDFLAGS="$ac_save_LDFLAGS" -+ LDFLAGS=$ac_save_LDFLAGS - - fi - - --test x$no_x = "xyes" && { echo "configure: error: Blackbox requires the X Window System libraries and headers." 1>&2; exit 1; } -+test x$no_x = "xyes" && { { echo "$as_me:$LINENO: error: Blackbox requires the X Window System libraries and headers." >&5 -+echo "$as_me: error: Blackbox requires the X Window System libraries and headers." >&2;} -+ { (exit 1); exit 1; }; } - - test x$x_includes = "x" && x_includes="/usr/include" - test x$x_libraries = "x" && x_libraries="/usr/lib" -@@ -2489,71 +5776,107 @@ - LIBS="$LIBS $X_LIBS" - LDFLAGS="$LDFLAGS $LIBS $X_PRE_LIBS" - --echo $ac_n "checking for GCC""... $ac_c" 1>&6 --echo "configure:2494: checking for GCC" >&5 -+echo "$as_me:$LINENO: checking for GCC" >&5 -+echo $ECHO_N "checking for GCC... $ECHO_C" >&6 - if test x$GCC = "xyes"; then -- echo "$ac_t""yes" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - CXXFLAGS="${CXXFLAGS} -Wall -W -pedantic" - else -- echo "$ac_t""no, trying other compilers" 1>&6 -- echo $ac_n "checking for MIPSpro""... $ac_c" 1>&6 --echo "configure:2501: checking for MIPSpro" >&5 -+ echo "$as_me:$LINENO: result: no, trying other compilers" >&5 -+echo "${ECHO_T}no, trying other compilers" >&6 -+ echo "$as_me:$LINENO: checking for MIPSpro" >&5 -+echo $ECHO_N "checking for MIPSpro... $ECHO_C" >&6 - mips_pro_ver=`$CC -version 2>&1 | grep -i mipspro | cut -f4 -d ' '` - if test "x$mips_pro_ver" = "x"; then -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - else -- echo "$ac_t""yes, version $mips_pro_ver." 1>&6 -- echo $ac_n "checking for -LANG:std in CXXFLAGS""... $ac_c" 1>&6 --echo "configure:2508: checking for -LANG:std in CXXFLAGS" >&5 -+ echo "$as_me:$LINENO: result: yes, version $mips_pro_ver." >&5 -+echo "${ECHO_T}yes, version $mips_pro_ver." >&6 -+ echo "$as_me:$LINENO: checking for -LANG:std in CXXFLAGS" >&5 -+echo $ECHO_N "checking for -LANG:std in CXXFLAGS... $ECHO_C" >&6 - lang_std_not_set=`echo $CXXFLAGS | grep "\-LANG:std"` - if test "x$lang_std_not_set" = "x"; then -- echo "$ac_t""not set, setting." 1>&6 -+ echo "$as_me:$LINENO: result: not set, setting." >&5 -+echo "${ECHO_T}not set, setting." >&6 - CXXFLAGS="${CXXFLAGS} -LANG:std" - else -- echo "$ac_t""already set." 1>&6 -+ echo "$as_me:$LINENO: result: already set." >&5 -+echo "${ECHO_T}already set." >&6 - fi -- fi -+ fi - fi - --echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6 --echo "configure:2520: checking for XOpenDisplay in -lX11" >&5 --ac_lib_var=`echo X11'_'XOpenDisplay | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+echo "$as_me:$LINENO: checking for XOpenDisplay in -lX11" >&5 -+echo $ECHO_N "checking for XOpenDisplay in -lX11... $ECHO_C" >&6 -+if test "${ac_cv_lib_X11_XOpenDisplay+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-lX11 $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2528 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char XOpenDisplay(); -- --int main() { --XOpenDisplay() --; return 0; } --EOF --if { (eval echo configure:2539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char XOpenDisplay (); -+int -+main () -+{ -+XOpenDisplay (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_X11_XOpenDisplay=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_X11_XOpenDisplay=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XOpenDisplay" >&5 -+echo "${ECHO_T}$ac_cv_lib_X11_XOpenDisplay" >&6 -+if test $ac_cv_lib_X11_XOpenDisplay = yes; then - LIBS="$LIBS -lX11" - else -- echo "$ac_t""no" 1>&6 --{ echo "configure: error: Could not find XOpenDisplay in -lX11." 1>&2; exit 1; } -+ { { echo "$as_me:$LINENO: error: Could not find XOpenDisplay in -lX11." >&5 -+echo "$as_me: error: Could not find XOpenDisplay in -lX11." >&2;} -+ { (exit 1); exit 1; }; } - - fi - -@@ -2563,227 +5886,469 @@ - Xext_lib="" - - SHAPE="" --echo $ac_n "checking whether to build support for the XShape extension""... $ac_c" 1>&6 --echo "configure:2568: checking whether to build support for the XShape extension" >&5 -+echo "$as_me:$LINENO: checking whether to build support for the XShape extension" >&5 -+echo $ECHO_N "checking whether to build support for the XShape extension... $ECHO_C" >&6 - # Check whether --enable-shape or --disable-shape was given. - if test "${enable_shape+set}" = set; then - enableval="$enable_shape" -- : --fi - -+fi; - - : ${enableval="yes"} - if test x$enableval = "xyes"; then -- echo "$ac_t""yes" 1>&6 -- echo $ac_n "checking for XShapeCombineShape in -lXext""... $ac_c" 1>&6 --echo "configure:2580: checking for XShapeCombineShape in -lXext" >&5 --ac_lib_var=`echo Xext'_'XShapeCombineShape | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 -+ echo "$as_me:$LINENO: checking for XShapeCombineShape in -lXext" >&5 -+echo $ECHO_N "checking for XShapeCombineShape in -lXext... $ECHO_C" >&6 -+if test "${ac_cv_lib_Xext_XShapeCombineShape+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-lXext $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2588 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char XShapeCombineShape(); -- --int main() { --XShapeCombineShape() --; return 0; } --EOF --if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -- echo $ac_n "checking for X11/extensions/shape.h""... $ac_c" 1>&6 --echo "configure:2615: checking for X11/extensions/shape.h" >&5 -- cat > conftest.$ac_ext <<EOF --#line 2617 "configure" --#include "confdefs.h" -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char XShapeCombineShape (); -+int -+main () -+{ -+XShapeCombineShape (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_Xext_XShapeCombineShape=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_Xext_XShapeCombineShape=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_XShapeCombineShape" >&5 -+echo "${ECHO_T}$ac_cv_lib_Xext_XShapeCombineShape" >&6 -+if test $ac_cv_lib_Xext_XShapeCombineShape = yes; then -+ echo "$as_me:$LINENO: checking for X11/extensions/shape.h" >&5 -+echo $ECHO_N "checking for X11/extensions/shape.h... $ECHO_C" >&6 -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - #include <X11/Xlib.h> - #include <X11/Xutil.h> - #include <X11/extensions/shape.h> - --int main() { -+int -+main () -+{ - long foo = ShapeSet --; return 0; } --EOF --if { (eval echo configure:2627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- echo "$ac_t""yes" 1>&6 -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - SHAPE="-DSHAPE"; Xext_lib="-lXext" - else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- echo "$ac_t""no" 1>&6 -- -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+ - fi --rm -f conftest* -- -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+ -+fi -+ - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+fi -+ -+ -+LIBS="$LIBS $Xext_lib" -+ -+LIBS="$LIBS $X_EXTRA_LIBS" -+ -+Xext_lib="" -+ -+XINERAMA="" -+echo "$as_me:$LINENO: checking whether to build support for the Xinerama extension" >&5 -+echo $ECHO_N "checking whether to build support for the Xinerama extension... $ECHO_C" >&6 -+# Check whether --enable-xinerama or --disable-xinerama was given. -+if test "${enable_xinerama+set}" = set; then -+ enableval="$enable_xinerama" -+ -+fi; -+ -+: ${enableval="yes"} -+if test x$enableval = "xyes"; then -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 -+ echo "$as_me:$LINENO: checking for XineramaQueryScreens in -lXinerama" >&5 -+echo $ECHO_N "checking for XineramaQueryScreens in -lXinerama... $ECHO_C" >&6 -+if test "${ac_cv_lib_Xinerama_XineramaQueryScreens+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lXinerama $LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char XineramaQueryScreens (); -+int -+main () -+{ -+XineramaQueryScreens (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_Xinerama_XineramaQueryScreens=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_Xinerama_XineramaQueryScreens=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_Xinerama_XineramaQueryScreens" >&5 -+echo "${ECHO_T}$ac_cv_lib_Xinerama_XineramaQueryScreens" >&6 -+if test $ac_cv_lib_Xinerama_XineramaQueryScreens = yes; then -+ echo "$as_me:$LINENO: checking for X11/extensions/Xinerama.h" >&5 -+echo $ECHO_N "checking for X11/extensions/Xinerama.h... $ECHO_C" >&6 -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+#include <X11/Xlib.h> -+#include <X11/Xutil.h> -+#include <X11/extensions/Xinerama.h> -+ -+int -+main () -+{ -+XineramaScreenInfo* s = 0 -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 -+ XINERAMA="-DXINERAMA"; Xext_lib="-lXext -lXinerama" -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+ -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+ - fi - - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - - - LIBS="$LIBS $Xext_lib" - - ORDEREDPSEUDO="" --echo $ac_n "checking whether to include Pseudocolor ordered dithering code""... $ac_c" 1>&6 --echo "configure:2653: checking whether to include Pseudocolor ordered dithering code" >&5 -+echo "$as_me:$LINENO: checking whether to include Pseudocolor ordered dithering code" >&5 -+echo $ECHO_N "checking whether to include Pseudocolor ordered dithering code... $ECHO_C" >&6 - # Check whether --enable-ordered-pseudo or --disable-ordered-pseudo was given. - if test "${enable_ordered_pseudo+set}" = set; then - enableval="$enable_ordered_pseudo" - if test x$enableval = "xyes"; then -- echo "$ac_t""yes" 1>&6 -- ORDEREDPSEUDO="-DORDEREDPSEUDO" -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 -+ ORDEREDPSEUDO="-DORDEREDPSEUDO" - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - else -- echo "$ac_t""no" 1>&6 -- --fi -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - -+fi; - - - DEBUG="" --echo $ac_n "checking whether to include verbose debugging code""... $ac_c" 1>&6 --echo "configure:2672: checking whether to include verbose debugging code" >&5 -+echo "$as_me:$LINENO: checking whether to include verbose debugging code" >&5 -+echo $ECHO_N "checking whether to include verbose debugging code... $ECHO_C" >&6 - # Check whether --enable-debug or --disable-debug was given. - if test "${enable_debug+set}" = set; then - enableval="$enable_debug" - if test x$enableval = "xyes"; then -- echo "$ac_t""yes" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - if test x$GCC = "xyes"; then - DEBUG="-DDEBUG -fno-inline -g" - else - DEBUG="-DDEBUG" - fi - else -- echo "$ac_t""no" 1>&6 -- DEBUG="-DNDEBUG" -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+ DEBUG="-DNDEBUG" - fi - else -- echo "$ac_t""no" 1>&6 -- DEBUG="-DNDEBUG" -- --fi -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 -+ DEBUG="-DNDEBUG" - -+fi; - - - NLS="" --echo $ac_n "checking whether to include NLS support""... $ac_c" 1>&6 --echo "configure:2697: checking whether to include NLS support" >&5 -+echo "$as_me:$LINENO: checking whether to include NLS support" >&5 -+echo $ECHO_N "checking whether to include NLS support... $ECHO_C" >&6 - # Check whether --enable-nls or --disable-nls was given. - if test "${enable_nls+set}" = set; then - enableval="$enable_nls" - if test x$enableval = "xyes"; then -- echo "$ac_t""yes" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - NLS="-DNLS" - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - else -- echo "$ac_t""yes" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - NLS="-DNLS" - --fi -- -+fi; - - --echo $ac_n "checking for setlocale in -lxpg4""... $ac_c" 1>&6 --echo "configure:2716: checking for setlocale in -lxpg4" >&5 --ac_lib_var=`echo xpg4'_'setlocale | sed 'y%./+-%__p_%'` --if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+echo "$as_me:$LINENO: checking for setlocale in -lxpg4" >&5 -+echo $ECHO_N "checking for setlocale in -lxpg4... $ECHO_C" >&6 -+if test "${ac_cv_lib_xpg4_setlocale+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_save_LIBS="$LIBS" -+ ac_check_lib_save_LIBS=$LIBS - LIBS="-lxpg4 $LIBS" --cat > conftest.$ac_ext <<EOF --#line 2724 "configure" --#include "confdefs.h" --/* Override any gcc2 internal prototype to avoid an error. */ --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char setlocale(); -- --int main() { --setlocale() --; return 0; } --EOF --if { (eval echo configure:2735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=yes" --else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- eval "ac_cv_lib_$ac_lib_var=no" --fi --rm -f conftest* --LIBS="$ac_save_LIBS" -+cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - --fi --if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then -- echo "$ac_t""yes" 1>&6 -+/* Override any gcc2 internal prototype to avoid an error. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+/* We use char because int might match the return type of a gcc2 -+ builtin and then its argument prototype would still apply. */ -+char setlocale (); -+int -+main () -+{ -+setlocale (); -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext conftest$ac_exeext -+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ (eval $ac_link) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest$ac_exeext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then -+ ac_cv_lib_xpg4_setlocale=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_lib_xpg4_setlocale=no -+fi -+rm -f conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+echo "$as_me:$LINENO: result: $ac_cv_lib_xpg4_setlocale" >&5 -+echo "${ECHO_T}$ac_cv_lib_xpg4_setlocale" >&6 -+if test $ac_cv_lib_xpg4_setlocale = yes; then - LIBS="$LIBS -lxpg4" --else -- echo "$ac_t""no" 1>&6 - fi - - - for ac_prog in gencat - do --# Extract the first word of "$ac_prog", so it can be a program name with args. -+ # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 --echo "configure:2761: checking for $ac_word" >&5 --if eval "test \"`echo '$''{'ac_cv_prog_gencat_cmd'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 -+echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+if test "${ac_cv_prog_gencat_cmd+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 - else - if test -n "$gencat_cmd"; then - ac_cv_prog_gencat_cmd="$gencat_cmd" # Let the user override the test. - else -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -- ac_dummy="$PATH" -- for ac_dir in $ac_dummy; do -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/$ac_word; then -- ac_cv_prog_gencat_cmd="$ac_prog" -- break -- fi -- done -- IFS="$ac_save_ifs" -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ ac_cv_prog_gencat_cmd="$ac_prog" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+ - fi - fi --gencat_cmd="$ac_cv_prog_gencat_cmd" -+gencat_cmd=$ac_cv_prog_gencat_cmd - if test -n "$gencat_cmd"; then -- echo "$ac_t""$gencat_cmd" 1>&6 -+ echo "$as_me:$LINENO: result: $gencat_cmd" >&5 -+echo "${ECHO_T}$gencat_cmd" >&6 - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - --test -n "$gencat_cmd" && break -+ test -n "$gencat_cmd" && break - done - - if test x$gencat_cmd = "x"; then -@@ -2792,37 +6357,42 @@ - - - TIMEDCACHE="" --echo $ac_n "checking whether to use the new timed pixmap cache""... $ac_c" 1>&6 --echo "configure:2797: checking whether to use the new timed pixmap cache" >&5 -+echo "$as_me:$LINENO: checking whether to use the new timed pixmap cache" >&5 -+echo $ECHO_N "checking whether to use the new timed pixmap cache... $ECHO_C" >&6 - # Check whether --enable-timed-cache or --disable-timed-cache was given. - if test "${enable_timed_cache+set}" = set; then - enableval="$enable_timed_cache" - if test x$enableval = "xyes"; then -- echo "$ac_t""yes" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - TIMEDCACHE="-DTIMEDCACHE" - else -- echo "$ac_t""no" 1>&6 -+ echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6 - fi - else -- echo "$ac_t""yes" 1>&6 -+ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6 - TIMEDCACHE="-DTIMEDCACHE" - --fi -- -+fi; - - --echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 --echo "configure:2816: checking return type of signal handlers" >&5 --if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then -- echo $ac_n "(cached) $ac_c" 1>&6 --else -- cat > conftest.$ac_ext <<EOF --#line 2821 "configure" --#include "confdefs.h" -+echo "$as_me:$LINENO: checking return type of signal handlers" >&5 -+echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 -+if test "${ac_cv_type_signal+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ - #include <sys/types.h> - #include <signal.h> - #ifdef signal --#undef signal -+# undef signal - #endif - #ifdef __cplusplus - extern "C" void (*signal (int, void (*)(int)))(int); -@@ -2830,41 +6400,65 @@ - void (*signal ()) (); - #endif - --int main() { -+int -+main () -+{ - int i; --; return 0; } --EOF --if { (eval echo configure:2838: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then -- rm -rf conftest* -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ (eval $ac_compile) 2>conftest.er1 -+ ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); } && -+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; } && -+ { ac_try='test -s conftest.$ac_objext' -+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -+ (eval $ac_try) 2>&5 -+ ac_status=$? -+ echo "$as_me:$LINENO: \$? = $ac_status" >&5 -+ (exit $ac_status); }; }; then - ac_cv_type_signal=void - else -- echo "configure: failed program was:" >&5 -- cat conftest.$ac_ext >&5 -- rm -rf conftest* -- ac_cv_type_signal=int -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ac_cv_type_signal=int - fi --rm -f conftest* -+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - fi -+echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 -+echo "${ECHO_T}$ac_cv_type_signal" >&6 - --echo "$ac_t""$ac_cv_type_signal" 1>&6 --cat >> confdefs.h <<EOF -+cat >>confdefs.h <<_ACEOF - #define RETSIGTYPE $ac_cv_type_signal --EOF -+_ACEOF - - - --echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 --echo "configure:2858: checking whether to enable maintainer-specific portions of Makefiles" >&5 -+echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 - # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. - if test "${enable_maintainer_mode+set}" = set; then - enableval="$enable_maintainer_mode" - USE_MAINTAINER_MODE=$enableval - else - USE_MAINTAINER_MODE=no --fi -+fi; -+ echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 - -- echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 -- - - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= -@@ -2874,460 +6468,1332 @@ - MAINTAINER_MODE_FALSE= - fi - MAINT=$MAINTAINER_MODE_TRUE -- - - --echo "$ac_t""" 1>&6 --echo "$ac_t"" $PACKAGE version $VERSION configured successfully." 1>&6 --echo "$ac_t""" 1>&6 --echo "$ac_t""Using '$prefix' for installation." 1>&6 --echo "$ac_t""Using '$CXX' for C++ compiler." 1>&6 --echo "$ac_t""Building with '$CXXFLAGS' for C++ compiler flags." 1>&6 --echo "$ac_t""Building with '$LIBS' for linker flags." 1>&6 --echo "$ac_t""" 1>&6 - -+echo "$as_me:$LINENO: result: " >&5 -+echo "${ECHO_T}" >&6 -+echo "$as_me:$LINENO: result: $PACKAGE version $VERSION configured successfully." >&5 -+echo "${ECHO_T} $PACKAGE version $VERSION configured successfully." >&6 -+echo "$as_me:$LINENO: result: " >&5 -+echo "${ECHO_T}" >&6 -+echo "$as_me:$LINENO: result: Using '$prefix' for installation." >&5 -+echo "${ECHO_T}Using '$prefix' for installation." >&6 -+echo "$as_me:$LINENO: result: Using '$CXX' for C++ compiler." >&5 -+echo "${ECHO_T}Using '$CXX' for C++ compiler." >&6 -+echo "$as_me:$LINENO: result: Building with '$CXXFLAGS' for C++ compiler flags." >&5 -+echo "${ECHO_T}Building with '$CXXFLAGS' for C++ compiler flags." >&6 -+echo "$as_me:$LINENO: result: Building with '$LIBS' for linker flags." >&5 -+echo "${ECHO_T}Building with '$LIBS' for linker flags." >&6 -+echo "$as_me:$LINENO: result: " >&5 -+echo "${ECHO_T}" >&6 - - -+ ac_config_headers="$ac_config_headers config.h" - --trap '' 1 2 15 --cat > confcache <<\EOF -+ ac_config_commands="$ac_config_commands default-1" -+ -+ ac_config_files="$ac_config_files Makefile src/Makefile util/Makefile data/Makefile data/styles/Makefile doc/Makefile nls/Makefile nls/C/Makefile nls/da_DK/Makefile nls/de_DE/Makefile nls/es_AR/Makefile nls/es_ES/Makefile nls/fr_FR/Makefile nls/hu_HU/Makefile nls/it_IT/Makefile nls/ja_JP/Makefile nls/ko_KR/Makefile nls/lv_LV/Makefile nls/nl_NL/Makefile nls/no_NO/Makefile nls/pl_PL/Makefile nls/pt_BR/Makefile nls/ro_RO/Makefile nls/ru_RU/Makefile nls/sk_SK/Makefile nls/sl_SI/Makefile nls/sv_SE/Makefile nls/uk_UA/Makefile nls/zh_CN/Makefile nls/zh_TW/Makefile version.h" -+cat >confcache <<\_ACEOF - # This file is a shell script that caches the results of configure - # tests run on this system so they can be shared between configure --# scripts and configure runs. It is not useful on other systems. --# If it contains results you don't want to keep, you may remove or edit it. -+# scripts and configure runs, see configure's option --config-cache. -+# It is not useful on other systems. If it contains results you don't -+# want to keep, you may remove or edit it. - # --# By default, configure uses ./config.cache as the cache file, --# creating it if it does not exist already. You can give configure --# the --cache-file=FILE option to use a different cache file; that is --# what configure does when it calls configure scripts in --# subdirectories, so they share the cache. --# Giving --cache-file=/dev/null disables caching, for debugging configure. --# config.status only pays attention to the cache file if you give it the --# --recheck option to rerun configure. -+# config.status only pays attention to the cache file if you give it -+# the --recheck option to rerun configure. - # --EOF -+# `ac_cv_env_foo' variables (set or unset) will be overridden when -+# loading this file, other *unset* `ac_cv_foo' will be assigned the -+# following values. -+ -+_ACEOF -+ - # The following way of writing the cache mishandles newlines in values, - # but we know of no workaround that is simple, portable, and efficient. - # So, don't put newlines in cache variables' values. - # Ultrix sh set writes to stderr and can't be redirected directly, - # and sets the high bit in the cache file unless we assign to the vars. --(set) 2>&1 | -- case `(ac_space=' '; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -- # `set' does not quote correctly, so add quotes (double-quote substitution -- # turns \\\\ into \\, and sed turns \\ into \). -- sed -n \ -- -e "s/'/'\\\\''/g" \ -- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" -- ;; -- *) -- # `set' quotes correctly as required by POSIX, so do not add quotes. -- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' -- ;; -- esac >> confcache --if cmp -s $cache_file confcache; then -- : --else -+{ -+ (set) 2>&1 | -+ case `(ac_space=' '; set | grep ac_space) 2>&1` in -+ *ac_space=\ *) -+ # `set' does not quote correctly, so add quotes (double-quote -+ # substitution turns \\\\ into \\, and sed turns \\ into \). -+ sed -n \ -+ "s/'/'\\\\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" -+ ;; -+ *) -+ # `set' quotes correctly as required by POSIX, so do not add quotes. -+ sed -n \ -+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -+ ;; -+ esac; -+} | -+ sed ' -+ t clear -+ : clear -+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ -+ t end -+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -+ : end' >>confcache -+if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then -- echo "updating cache $cache_file" -- cat confcache > $cache_file -+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" -+ cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi - fi - rm -f confcache - --trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 -- - test "x$prefix" = xNONE && prefix=$ac_default_prefix - # Let make expand exec_prefix. - test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - --# Any assignment to VPATH causes Sun make to only execute --# the first set of double-colon rules, so remove it if not needed. --# If there is a colon in the path, we need to keep it. -+# VPATH may cause trouble with some makes, so we remove $(srcdir), -+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -+# trailing colons and then remove the whole line if VPATH becomes empty -+# (actually we leave an empty line to preserve line numbers). - if test "x$srcdir" = x.; then -- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -+ ac_vpsub='/^[ ]*VPATH[ ]*=/{ -+s/:*\$(srcdir):*/:/; -+s/:*\${srcdir}:*/:/; -+s/:*@srcdir@:*/:/; -+s/^\([^=]*=[ ]*\):*/\1/; -+s/:*$//; -+s/^[^=]*=[ ]*$//; -+}' - fi - --trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 -- - DEFS=-DHAVE_CONFIG_H - --# Without the "./", some shells look in PATH for config.status. --: ${CONFIG_STATUS=./config.status} -+ac_libobjs= -+ac_ltlibobjs= -+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue -+ # 1. Remove the extension, and $U if already installed. -+ ac_i=`echo "$ac_i" | -+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'` -+ # 2. Add them. -+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" -+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -+done -+LIBOBJS=$ac_libobjs - --echo creating $CONFIG_STATUS --rm -f $CONFIG_STATUS --cat > $CONFIG_STATUS <<EOF --#! /bin/sh --# Generated automatically by configure. -+LTLIBOBJS=$ac_ltlibobjs -+ -+ -+ -+: ${CONFIG_STATUS=./config.status} -+ac_clean_files_save=$ac_clean_files -+ac_clean_files="$ac_clean_files $CONFIG_STATUS" -+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -+echo "$as_me: creating $CONFIG_STATUS" >&6;} -+cat >$CONFIG_STATUS <<_ACEOF -+#! $SHELL -+# Generated by $as_me. - # Run this file to recreate the current configuration. --# This directory was configured as follows, --# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: --# --# $0 $ac_configure_args --# - # Compiler output produced by configure, useful for debugging --# configure, is in ./config.log if it exists. -+# configure, is in config.log if it exists. - --ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" --for ac_option -+debug=false -+ac_cs_recheck=false -+ac_cs_silent=false -+SHELL=\${CONFIG_SHELL-$SHELL} -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ -+# Be Bourne compatible -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -+ set -o posix -+fi -+DUALCASE=1; export DUALCASE # for MKS sh -+ -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+$as_unset ENV MAIL MAILPATH -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME -+do -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ $as_unset $as_var -+ fi -+done -+ -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ -+ -+# Name of the executable. -+as_me=`$as_basename "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)$' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -+ /^X\/\(\/\/\)$/{ s//\1/; q; } -+ /^X\/\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` -+ -+ -+# PATH needs CR, and LINENO needs CR and PATH. -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh -+fi -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x$as_lineno_3" = "x$as_lineno_2" || { -+ # Find who we are. Look in the path if we contain no path at all -+ # relative or not. -+ case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+ -+ ;; -+ esac -+ # We did not find ourselves, most probably we were run as `sh COMMAND' -+ # in which case we are not to be found in the path. -+ if test "x$as_myself" = x; then -+ as_myself=$0 -+ fi -+ if test ! -f "$as_myself"; then -+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} -+ { (exit 1); exit 1; }; } -+ fi -+ case $CONFIG_SHELL in -+ '') -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for as_base in sh bash ksh sh5; do -+ case $as_dir in -+ /*) -+ if ("$as_dir/$as_base" -c ' -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -+ CONFIG_SHELL=$as_dir/$as_base -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$0" ${1+"$@"} -+ fi;; -+ esac -+ done -+done -+;; -+ esac -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line before each line; the second 'sed' does the real -+ # work. The second script uses 'N' to pair each line-number line -+ # with the numbered line, and appends trailing '-' during -+ # substitution so that $LINENO is not a special case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -+ sed '=' <$as_myself | -+ sed ' -+ N -+ s,$,-, -+ : loop -+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -+ t loop -+ s,-$,, -+ s,^['$as_cr_digits']*\n,, -+ ' >$as_me.lineno && -+ chmod +x $as_me.lineno || -+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensible to this). -+ . ./$as_me.lineno -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -+ *c*,-n*) ECHO_N= ECHO_C=' -+' ECHO_T=' ' ;; -+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ # We could just check for DJGPP; but this test a) works b) is more generic -+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -+ if test -f conf$$.exe; then -+ # Don't use ln at all; we don't have any links -+ as_ln_s='cp -p' -+ else -+ as_ln_s='ln -s' -+ fi -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.file -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+as_executable_p="test -f" -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ -+ -+# IFS -+# We need space, tab and new line, in precisely that order. -+as_nl=' -+' -+IFS=" $as_nl" -+ -+# CDPATH. -+$as_unset CDPATH -+ -+exec 6>&1 -+ -+# Open the log real soon, to keep \$[0] and so on meaningful, and to -+# report actual input values of CONFIG_FILES etc. instead of their -+# values after options handling. Logging --version etc. is OK. -+exec 5>>config.log -+{ -+ echo -+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -+## Running $as_me. ## -+_ASBOX -+} >&5 -+cat >&5 <<_CSEOF -+ -+This file was extended by $as_me, which was -+generated by GNU Autoconf 2.59. Invocation command line was -+ -+ CONFIG_FILES = $CONFIG_FILES -+ CONFIG_HEADERS = $CONFIG_HEADERS -+ CONFIG_LINKS = $CONFIG_LINKS -+ CONFIG_COMMANDS = $CONFIG_COMMANDS -+ $ $0 $@ -+ -+_CSEOF -+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -+echo >&5 -+_ACEOF -+ -+# Files that config.status was made for. -+if test -n "$ac_config_files"; then -+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -+fi -+ -+if test -n "$ac_config_headers"; then -+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -+fi -+ -+if test -n "$ac_config_links"; then -+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -+fi -+ -+if test -n "$ac_config_commands"; then -+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -+fi -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+ -+ac_cs_usage="\ -+\`$as_me' instantiates files from templates according to the -+current configuration. -+ -+Usage: $0 [OPTIONS] [FILE]... -+ -+ -h, --help print this help, then exit -+ -V, --version print version number, then exit -+ -q, --quiet do not print progress messages -+ -d, --debug don't remove temporary files -+ --recheck update $as_me by reconfiguring in the same conditions -+ --file=FILE[:TEMPLATE] -+ instantiate the configuration file FILE -+ --header=FILE[:TEMPLATE] -+ instantiate the configuration header FILE -+ -+Configuration files: -+$config_files -+ -+Configuration headers: -+$config_headers -+ -+Configuration commands: -+$config_commands -+ -+Report bugs to <bug-autoconf@gnu.org>." -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+ac_cs_version="\\ -+config.status -+configured by $0, generated by GNU Autoconf 2.59, -+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" -+ -+Copyright (C) 2003 Free Software Foundation, Inc. -+This config.status script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it." -+srcdir=$srcdir -+INSTALL="$INSTALL" -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If no file are specified by the user, then we need to provide default -+# value. By we need to know if files were specified by the user. -+ac_need_defaults=: -+while test $# != 0 - do -- case "\$ac_option" in -+ case $1 in -+ --*=*) -+ ac_option=`expr "x$1" : 'x\([^=]*\)='` -+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` -+ ac_shift=: -+ ;; -+ -*) -+ ac_option=$1 -+ ac_optarg=$2 -+ ac_shift=shift -+ ;; -+ *) # This is not an option, so the user has probably given explicit -+ # arguments. -+ ac_option=$1 -+ ac_need_defaults=false;; -+ esac -+ -+ case $ac_option in -+ # Handling of the options. -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) -- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" -- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -- -version | --version | --versio | --versi | --vers | --ver | --ve | --v) -- echo "$CONFIG_STATUS generated by autoconf version 2.13" -- exit 0 ;; -- -help | --help | --hel | --he | --h) -- echo "\$ac_cs_usage"; exit 0 ;; -- *) echo "\$ac_cs_usage"; exit 1 ;; -+ ac_cs_recheck=: ;; -+ --version | --vers* | -V ) -+ echo "$ac_cs_version"; exit 0 ;; -+ --he | --h) -+ # Conflict between --help and --header -+ { { echo "$as_me:$LINENO: error: ambiguous option: $1 -+Try \`$0 --help' for more information." >&5 -+echo "$as_me: error: ambiguous option: $1 -+Try \`$0 --help' for more information." >&2;} -+ { (exit 1); exit 1; }; };; -+ --help | --hel | -h ) -+ echo "$ac_cs_usage"; exit 0 ;; -+ --debug | --d* | -d ) -+ debug=: ;; -+ --file | --fil | --fi | --f ) -+ $ac_shift -+ CONFIG_FILES="$CONFIG_FILES $ac_optarg" -+ ac_need_defaults=false;; -+ --header | --heade | --head | --hea ) -+ $ac_shift -+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" -+ ac_need_defaults=false;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil | --si | --s) -+ ac_cs_silent=: ;; -+ -+ # This is an error. -+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -+Try \`$0 --help' for more information." >&5 -+echo "$as_me: error: unrecognized option: $1 -+Try \`$0 --help' for more information." >&2;} -+ { (exit 1); exit 1; }; } ;; -+ -+ *) ac_config_targets="$ac_config_targets $1" ;; -+ - esac -+ shift - done - --ac_given_srcdir=$srcdir --ac_given_INSTALL="$INSTALL" -+ac_configure_extra_args= - --trap 'rm -fr `echo "Makefile --src/Makefile --util/Makefile --data/Makefile --data/styles/Makefile --doc/Makefile --nls/Makefile --nls/C/Makefile --nls/da_DK/Makefile --nls/de_DE/Makefile --nls/es_AR/Makefile --nls/es_ES/Makefile --nls/fr_FR/Makefile --nls/hu_HU/Makefile --nls/it_IT/Makefile --nls/ja_JP/Makefile --nls/ko_KR/Makefile --nls/lv_LV/Makefile --nls/nl_NL/Makefile --nls/no_NO/Makefile --nls/pl_PL/Makefile --nls/pt_BR/Makefile --nls/ro_RO/Makefile --nls/ru_RU/Makefile --nls/sk_SK/Makefile --nls/sl_SI/Makefile --nls/sv_SE/Makefile --nls/uk_UA/Makefile --nls/zh_CN/Makefile --nls/zh_TW/Makefile --version.h config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 --EOF --cat >> $CONFIG_STATUS <<EOF -- --# Protect against being on the right side of a sed subst in config.status. --sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; -- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF --$ac_vpsub --$extrasub --s%@SHELL@%$SHELL%g --s%@CFLAGS@%$CFLAGS%g --s%@CPPFLAGS@%$CPPFLAGS%g --s%@CXXFLAGS@%$CXXFLAGS%g --s%@FFLAGS@%$FFLAGS%g --s%@DEFS@%$DEFS%g --s%@LDFLAGS@%$LDFLAGS%g --s%@LIBS@%$LIBS%g --s%@exec_prefix@%$exec_prefix%g --s%@prefix@%$prefix%g --s%@program_transform_name@%$program_transform_name%g --s%@bindir@%$bindir%g --s%@sbindir@%$sbindir%g --s%@libexecdir@%$libexecdir%g --s%@datadir@%$datadir%g --s%@sysconfdir@%$sysconfdir%g --s%@sharedstatedir@%$sharedstatedir%g --s%@localstatedir@%$localstatedir%g --s%@libdir@%$libdir%g --s%@includedir@%$includedir%g --s%@oldincludedir@%$oldincludedir%g --s%@infodir@%$infodir%g --s%@mandir@%$mandir%g --s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g --s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g --s%@INSTALL_DATA@%$INSTALL_DATA%g --s%@PACKAGE@%$PACKAGE%g --s%@VERSION@%$VERSION%g --s%@ACLOCAL@%$ACLOCAL%g --s%@AUTOCONF@%$AUTOCONF%g --s%@AUTOMAKE@%$AUTOMAKE%g --s%@AUTOHEADER@%$AUTOHEADER%g --s%@MAKEINFO@%$MAKEINFO%g --s%@SET_MAKE@%$SET_MAKE%g --s%@CC@%$CC%g --s%@CXX@%$CXX%g --s%@regex_cmd@%$regex_cmd%g --s%@CPP@%$CPP%g --s%@X_CFLAGS@%$X_CFLAGS%g --s%@X_PRE_LIBS@%$X_PRE_LIBS%g --s%@X_LIBS@%$X_LIBS%g --s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g --s%@SHAPE@%$SHAPE%g --s%@ORDEREDPSEUDO@%$ORDEREDPSEUDO%g --s%@DEBUG@%$DEBUG%g --s%@NLS@%$NLS%g --s%@gencat_cmd@%$gencat_cmd%g --s%@TIMEDCACHE@%$TIMEDCACHE%g --s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g --s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g --s%@MAINT@%$MAINT%g -+if $ac_cs_silent; then -+ exec 6>/dev/null -+ ac_configure_extra_args="$ac_configure_extra_args --silent" -+fi -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+if \$ac_cs_recheck; then -+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+fi -+ -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+# -+# INIT-COMMANDS section. -+# -+ -+ -+ -+_ACEOF -+ -+ -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+for ac_config_target in $ac_config_targets -+do -+ case "$ac_config_target" in -+ # Handling of arguments. -+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; -+ "util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;; -+ "data/Makefile" ) CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; -+ "data/styles/Makefile" ) CONFIG_FILES="$CONFIG_FILES data/styles/Makefile" ;; -+ "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; -+ "nls/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/Makefile" ;; -+ "nls/C/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/C/Makefile" ;; -+ "nls/da_DK/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/da_DK/Makefile" ;; -+ "nls/de_DE/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/de_DE/Makefile" ;; -+ "nls/es_AR/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/es_AR/Makefile" ;; -+ "nls/es_ES/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/es_ES/Makefile" ;; -+ "nls/fr_FR/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/fr_FR/Makefile" ;; -+ "nls/hu_HU/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/hu_HU/Makefile" ;; -+ "nls/it_IT/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/it_IT/Makefile" ;; -+ "nls/ja_JP/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/ja_JP/Makefile" ;; -+ "nls/ko_KR/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/ko_KR/Makefile" ;; -+ "nls/lv_LV/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/lv_LV/Makefile" ;; -+ "nls/nl_NL/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/nl_NL/Makefile" ;; -+ "nls/no_NO/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/no_NO/Makefile" ;; -+ "nls/pl_PL/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/pl_PL/Makefile" ;; -+ "nls/pt_BR/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/pt_BR/Makefile" ;; -+ "nls/ro_RO/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/ro_RO/Makefile" ;; -+ "nls/ru_RU/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/ru_RU/Makefile" ;; -+ "nls/sk_SK/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/sk_SK/Makefile" ;; -+ "nls/sl_SI/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/sl_SI/Makefile" ;; -+ "nls/sv_SE/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/sv_SE/Makefile" ;; -+ "nls/uk_UA/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/uk_UA/Makefile" ;; -+ "nls/zh_CN/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/zh_CN/Makefile" ;; -+ "nls/zh_TW/Makefile" ) CONFIG_FILES="$CONFIG_FILES nls/zh_TW/Makefile" ;; -+ "version.h" ) CONFIG_FILES="$CONFIG_FILES version.h" ;; -+ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; -+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; -+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -+echo "$as_me: error: invalid argument: $ac_config_target" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+done -+ -+# If the user did not use the arguments to specify the items to instantiate, -+# then the envvar interface is used. Set only those that are not. -+# We use the long form for the default assignment because of an extremely -+# bizarre bug on SunOS 4.1.3. -+if $ac_need_defaults; then -+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers -+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -+fi -+ -+# Have a temporary directory for convenience. Make it in the build tree -+# simply because there is no reason to put it here, and in addition, -+# creating and moving files from /tmp can sometimes cause problems. -+# Create a temporary directory, and hook for its removal unless debugging. -+$debug || -+{ -+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 -+ trap '{ (exit 1); exit 1; }' 1 2 13 15 -+} -+ -+# Create a (secure) tmp directory for tmp files. -+ -+{ -+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && -+ test -n "$tmp" && test -d "$tmp" -+} || -+{ -+ tmp=./confstat$$-$RANDOM -+ (umask 077 && mkdir $tmp) -+} || -+{ -+ echo "$me: cannot create a temporary directory in ." >&2 -+ { (exit 1); exit 1; } -+} -+ -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+ -+# -+# CONFIG_FILES section. -+# - -+# No need to generate the scripts if there are no CONFIG_FILES. -+# This happens for instance when ./config.status config.h -+if test -n "\$CONFIG_FILES"; then -+ # Protect against being on the right side of a sed subst in config.status. -+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; -+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -+s,@SHELL@,$SHELL,;t t -+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -+s,@exec_prefix@,$exec_prefix,;t t -+s,@prefix@,$prefix,;t t -+s,@program_transform_name@,$program_transform_name,;t t -+s,@bindir@,$bindir,;t t -+s,@sbindir@,$sbindir,;t t -+s,@libexecdir@,$libexecdir,;t t -+s,@datadir@,$datadir,;t t -+s,@sysconfdir@,$sysconfdir,;t t -+s,@sharedstatedir@,$sharedstatedir,;t t -+s,@localstatedir@,$localstatedir,;t t -+s,@libdir@,$libdir,;t t -+s,@includedir@,$includedir,;t t -+s,@oldincludedir@,$oldincludedir,;t t -+s,@infodir@,$infodir,;t t -+s,@mandir@,$mandir,;t t -+s,@build_alias@,$build_alias,;t t -+s,@host_alias@,$host_alias,;t t -+s,@target_alias@,$target_alias,;t t -+s,@DEFS@,$DEFS,;t t -+s,@ECHO_C@,$ECHO_C,;t t -+s,@ECHO_N@,$ECHO_N,;t t -+s,@ECHO_T@,$ECHO_T,;t t -+s,@LIBS@,$LIBS,;t t -+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -+s,@INSTALL_DATA@,$INSTALL_DATA,;t t -+s,@PACKAGE@,$PACKAGE,;t t -+s,@VERSION@,$VERSION,;t t -+s,@ACLOCAL@,$ACLOCAL,;t t -+s,@AUTOCONF@,$AUTOCONF,;t t -+s,@AUTOMAKE@,$AUTOMAKE,;t t -+s,@AUTOHEADER@,$AUTOHEADER,;t t -+s,@MAKEINFO@,$MAKEINFO,;t t -+s,@SET_MAKE@,$SET_MAKE,;t t -+s,@CC@,$CC,;t t -+s,@CFLAGS@,$CFLAGS,;t t -+s,@LDFLAGS@,$LDFLAGS,;t t -+s,@CPPFLAGS@,$CPPFLAGS,;t t -+s,@ac_ct_CC@,$ac_ct_CC,;t t -+s,@EXEEXT@,$EXEEXT,;t t -+s,@OBJEXT@,$OBJEXT,;t t -+s,@CXX@,$CXX,;t t -+s,@CXXFLAGS@,$CXXFLAGS,;t t -+s,@ac_ct_CXX@,$ac_ct_CXX,;t t -+s,@regex_cmd@,$regex_cmd,;t t -+s,@CPP@,$CPP,;t t -+s,@EGREP@,$EGREP,;t t -+s,@X_CFLAGS@,$X_CFLAGS,;t t -+s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t -+s,@X_LIBS@,$X_LIBS,;t t -+s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t -+s,@SHAPE@,$SHAPE,;t t -+s,@XINERAMA@,$XINERAMA,;t t -+s,@ORDEREDPSEUDO@,$ORDEREDPSEUDO,;t t -+s,@DEBUG@,$DEBUG,;t t -+s,@NLS@,$NLS,;t t -+s,@gencat_cmd@,$gencat_cmd,;t t -+s,@TIMEDCACHE@,$TIMEDCACHE,;t t -+s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t -+s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t -+s,@MAINT@,$MAINT,;t t -+s,@LIBOBJS@,$LIBOBJS,;t t -+s,@LTLIBOBJS@,$LTLIBOBJS,;t t - CEOF --EOF - --cat >> $CONFIG_STATUS <<\EOF -+_ACEOF - --# Split the substitutions into bite-sized pieces for seds with --# small command number limits, like on Digital OSF/1 and HP-UX. --ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. --ac_file=1 # Number of current file. --ac_beg=1 # First line for current file. --ac_end=$ac_max_sed_cmds # Line after last line for current file. --ac_more_lines=: --ac_sed_cmds="" --while $ac_more_lines; do -- if test $ac_beg -gt 1; then -- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file -- else -- sed "${ac_end}q" conftest.subs > conftest.s$ac_file -- fi -- if test ! -s conftest.s$ac_file; then -- ac_more_lines=false -- rm -f conftest.s$ac_file -- else -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds="sed -f conftest.s$ac_file" -+ cat >>$CONFIG_STATUS <<\_ACEOF -+ # Split the substitutions into bite-sized pieces for seds with -+ # small command number limits, like on Digital OSF/1 and HP-UX. -+ ac_max_sed_lines=48 -+ ac_sed_frag=1 # Number of current file. -+ ac_beg=1 # First line for current file. -+ ac_end=$ac_max_sed_lines # Line after last line for current file. -+ ac_more_lines=: -+ ac_sed_cmds= -+ while $ac_more_lines; do -+ if test $ac_beg -gt 1; then -+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -+ else -+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -+ fi -+ if test ! -s $tmp/subs.frag; then -+ ac_more_lines=false - else -- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" -+ # The purpose of the label and of the branching condition is to -+ # speed up the sed processing (if there are no `@' at all, there -+ # is no need to browse any of the substitutions). -+ # These are the two extra sed commands mentioned above. -+ (echo ':t -+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed -+ if test -z "$ac_sed_cmds"; then -+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" -+ else -+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" -+ fi -+ ac_sed_frag=`expr $ac_sed_frag + 1` -+ ac_beg=$ac_end -+ ac_end=`expr $ac_end + $ac_max_sed_lines` - fi -- ac_file=`expr $ac_file + 1` -- ac_beg=$ac_end -- ac_end=`expr $ac_end + $ac_max_sed_cmds` -- fi --done --if test -z "$ac_sed_cmds"; then -- ac_sed_cmds=cat --fi --EOF -- --cat >> $CONFIG_STATUS <<EOF -- --CONFIG_FILES=\${CONFIG_FILES-"Makefile --src/Makefile --util/Makefile --data/Makefile --data/styles/Makefile --doc/Makefile --nls/Makefile --nls/C/Makefile --nls/da_DK/Makefile --nls/de_DE/Makefile --nls/es_AR/Makefile --nls/es_ES/Makefile --nls/fr_FR/Makefile --nls/hu_HU/Makefile --nls/it_IT/Makefile --nls/ja_JP/Makefile --nls/ko_KR/Makefile --nls/lv_LV/Makefile --nls/nl_NL/Makefile --nls/no_NO/Makefile --nls/pl_PL/Makefile --nls/pt_BR/Makefile --nls/ro_RO/Makefile --nls/ru_RU/Makefile --nls/sk_SK/Makefile --nls/sl_SI/Makefile --nls/sv_SE/Makefile --nls/uk_UA/Makefile --nls/zh_CN/Makefile --nls/zh_TW/Makefile --version.h"} --EOF --cat >> $CONFIG_STATUS <<\EOF --for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then -+ done -+ if test -z "$ac_sed_cmds"; then -+ ac_sed_cmds=cat -+ fi -+fi # test -n "$CONFIG_FILES" -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". -- case "$ac_file" in -- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` -- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; -- *) ac_file_in="${ac_file}.in" ;; -+ case $ac_file in -+ - | *:- | *:-:* ) # input from stdin -+ cat >$tmp/stdin -+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -+ * ) ac_file_in=$ac_file.in ;; - esac - -- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. -- -- # Remove last slash and all that follows it. Not all systems have dirname. -- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` -- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then -- # The file is in a subdirectory. -- test ! -d "$ac_dir" && mkdir "$ac_dir" -- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" -- # A "../" for each directory in $ac_dir_suffix. -- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` -- else -- ac_dir_suffix= ac_dots= -- fi -- -- case "$ac_given_srcdir" in -- .) srcdir=. -- if test -z "$ac_dots"; then top_srcdir=. -- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; -- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; -+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. -+ ac_dir=`(dirname "$ac_file") 2>/dev/null || -+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$ac_file" : 'X\(//\)[^/]' \| \ -+ X"$ac_file" : 'X\(//\)$' \| \ -+ X"$ac_file" : 'X\(/\)' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X"$ac_file" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -+ /^X\(\/\/\)[^/].*/{ s//\1/; q; } -+ /^X\(\/\/\)$/{ s//\1/; q; } -+ /^X\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` -+ { if $as_mkdir_p; then -+ mkdir -p "$ac_dir" -+ else -+ as_dir="$ac_dir" -+ as_dirs= -+ while test ! -d "$as_dir"; do -+ as_dirs="$as_dir $as_dirs" -+ as_dir=`(dirname "$as_dir") 2>/dev/null || -+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$as_dir" : 'X\(//\)[^/]' \| \ -+ X"$as_dir" : 'X\(//\)$' \| \ -+ X"$as_dir" : 'X\(/\)' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X"$as_dir" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -+ /^X\(\/\/\)[^/].*/{ s//\1/; q; } -+ /^X\(\/\/\)$/{ s//\1/; q; } -+ /^X\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` -+ done -+ test ! -n "$as_dirs" || mkdir $as_dirs -+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -+ { (exit 1); exit 1; }; }; } -+ -+ ac_builddir=. -+ -+if test "$ac_dir" != .; then -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A "../" for each directory in $ac_dir_suffix. -+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -+else -+ ac_dir_suffix= ac_top_builddir= -+fi -+ -+case $srcdir in -+ .) # No --srcdir option. We are building in place. -+ ac_srcdir=. -+ if test -z "$ac_top_builddir"; then -+ ac_top_srcdir=. -+ else -+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -+ fi ;; -+ [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir ;; - *) # Relative path. -- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" -- top_srcdir="$ac_dots$ac_given_srcdir" ;; -+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_builddir$srcdir ;; -+esac -+ -+# Do not use `cd foo && pwd` to compute absolute paths, because -+# the directories may not exist. -+case `pwd` in -+.) ac_abs_builddir="$ac_dir";; -+*) -+ case "$ac_dir" in -+ .) ac_abs_builddir=`pwd`;; -+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -+ *) ac_abs_builddir=`pwd`/"$ac_dir";; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_top_builddir=${ac_top_builddir}.;; -+*) -+ case ${ac_top_builddir}. in -+ .) ac_abs_top_builddir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_srcdir=$ac_srcdir;; -+*) -+ case $ac_srcdir in -+ .) ac_abs_srcdir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_top_srcdir=$ac_top_srcdir;; -+*) -+ case $ac_top_srcdir in -+ .) ac_abs_top_srcdir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -+ esac;; -+esac -+ -+ -+ case $INSTALL in -+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - -- case "$ac_given_INSTALL" in -- [/$]*) INSTALL="$ac_given_INSTALL" ;; -- *) INSTALL="$ac_dots$ac_given_INSTALL" ;; -- esac -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ if test x"$ac_file" = x-; then -+ configure_input= -+ else -+ configure_input="$ac_file. " -+ fi -+ configure_input=$configure_input"Generated from `echo $ac_file_in | -+ sed 's,.*/,,'` by configure." - -- echo creating "$ac_file" -- rm -f "$ac_file" -- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." -- case "$ac_file" in -- *Makefile*) ac_comsub="1i\\ --# $configure_input" ;; -- *) ac_comsub= ;; -- esac -+ # First look for the input files in the build tree, otherwise in the -+ # src tree. -+ ac_file_inputs=`IFS=: -+ for f in $ac_file_in; do -+ case $f in -+ -) echo $tmp/stdin ;; -+ [\\/$]*) -+ # Absolute (can't be DOS-style, as IFS=:) -+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -+echo "$as_me: error: cannot find input file: $f" >&2;} -+ { (exit 1); exit 1; }; } -+ echo "$f";; -+ *) # Relative -+ if test -f "$f"; then -+ # Build tree -+ echo "$f" -+ elif test -f "$srcdir/$f"; then -+ # Source tree -+ echo "$srcdir/$f" -+ else -+ # /dev/null tree -+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -+echo "$as_me: error: cannot find input file: $f" >&2;} -+ { (exit 1); exit 1; }; } -+ fi;; -+ esac -+ done` || { (exit 1); exit 1; } -+ -+ if test x"$ac_file" != x-; then -+ { echo "$as_me:$LINENO: creating $ac_file" >&5 -+echo "$as_me: creating $ac_file" >&6;} -+ rm -f "$ac_file" -+ fi -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ sed "$ac_vpsub -+$extrasub -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+:t -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -+s,@configure_input@,$configure_input,;t t -+s,@srcdir@,$ac_srcdir,;t t -+s,@abs_srcdir@,$ac_abs_srcdir,;t t -+s,@top_srcdir@,$ac_top_srcdir,;t t -+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -+s,@builddir@,$ac_builddir,;t t -+s,@abs_builddir@,$ac_abs_builddir,;t t -+s,@top_builddir@,$ac_top_builddir,;t t -+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -+s,@INSTALL@,$ac_INSTALL,;t t -+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out -+ rm -f $tmp/stdin -+ if test x"$ac_file" != x-; then -+ mv $tmp/out $ac_file -+ else -+ cat $tmp/out -+ rm -f $tmp/out -+ fi -+ -+done -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF - -- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` -- sed -e "$ac_comsub --s%@configure_input@%$configure_input%g --s%@srcdir@%$srcdir%g --s%@top_srcdir@%$top_srcdir%g --s%@INSTALL@%$INSTALL%g --" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file --fi; done --rm -f conftest.s* -+# -+# CONFIG_HEADER section. -+# - - # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where - # NAME is the cpp macro being defined and VALUE is the value it is being given. - # - # ac_d sets the value in "#define NAME VALUE" lines. --ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' --ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' --ac_dC='\3' --ac_dD='%g' --# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". --ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' --ac_uB='\([ ]\)%\1#\2define\3' -+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -+ac_dB='[ ].*$,\1#\2' -+ac_dC=' ' -+ac_dD=',;t' -+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -+ac_uB='$,\1#\2define\3' - ac_uC=' ' --ac_uD='\4%g' --# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". --ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' --ac_eB='$%\1#\2define\3' --ac_eC=' ' --ac_eD='%g' -- --if test "${CONFIG_HEADERS+set}" != set; then --EOF --cat >> $CONFIG_STATUS <<EOF -- CONFIG_HEADERS="config.h" --EOF --cat >> $CONFIG_STATUS <<\EOF --fi --for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then -+ac_uD=',;t' -+ -+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". -- case "$ac_file" in -- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` -- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; -- *) ac_file_in="${ac_file}.in" ;; -+ case $ac_file in -+ - | *:- | *:-:* ) # input from stdin -+ cat >$tmp/stdin -+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -+ * ) ac_file_in=$ac_file.in ;; - esac - -- echo creating $ac_file -+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 -+echo "$as_me: creating $ac_file" >&6;} - -- rm -f conftest.frag conftest.in conftest.out -- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` -- cat $ac_file_inputs > conftest.in -- --EOF -- --# Transform confdefs.h into a sed script conftest.vals that substitutes --# the proper values into config.h.in to produce config.h. And first: --# Protect against being on the right side of a sed subst in config.status. --# Protect against being in an unquoted here document in config.status. --rm -f conftest.vals --cat > conftest.hdr <<\EOF --s/[\\&%]/\\&/g --s%[\\$`]%\\&%g --s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp --s%ac_d%ac_u%gp --s%ac_u%ac_e%gp --EOF --sed -n -f conftest.hdr confdefs.h > conftest.vals --rm -f conftest.hdr -+ # First look for the input files in the build tree, otherwise in the -+ # src tree. -+ ac_file_inputs=`IFS=: -+ for f in $ac_file_in; do -+ case $f in -+ -) echo $tmp/stdin ;; -+ [\\/$]*) -+ # Absolute (can't be DOS-style, as IFS=:) -+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -+echo "$as_me: error: cannot find input file: $f" >&2;} -+ { (exit 1); exit 1; }; } -+ # Do quote $f, to prevent DOS paths from being IFS'd. -+ echo "$f";; -+ *) # Relative -+ if test -f "$f"; then -+ # Build tree -+ echo "$f" -+ elif test -f "$srcdir/$f"; then -+ # Source tree -+ echo "$srcdir/$f" -+ else -+ # /dev/null tree -+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -+echo "$as_me: error: cannot find input file: $f" >&2;} -+ { (exit 1); exit 1; }; } -+ fi;; -+ esac -+ done` || { (exit 1); exit 1; } -+ # Remove the trailing spaces. -+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in -+ -+_ACEOF -+ -+# Transform confdefs.h into two sed scripts, `conftest.defines' and -+# `conftest.undefs', that substitutes the proper values into -+# config.h.in to produce config.h. The first handles `#define' -+# templates, and the second `#undef' templates. -+# And first: Protect against being on the right side of a sed subst in -+# config.status. Protect against being in an unquoted here document -+# in config.status. -+rm -f conftest.defines conftest.undefs -+# Using a here document instead of a string reduces the quoting nightmare. -+# Putting comments in sed scripts is not portable. -+# -+# `end' is used to avoid that the second main sed command (meant for -+# 0-ary CPP macros) applies to n-ary macro definitions. -+# See the Autoconf documentation for `clear'. -+cat >confdef2sed.sed <<\_ACEOF -+s/[\\&,]/\\&/g -+s,[\\$`],\\&,g -+t clear -+: clear -+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp -+t end -+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp -+: end -+_ACEOF -+# If some macros were called several times there might be several times -+# the same #defines, which is useless. Nevertheless, we may not want to -+# sort them, since we want the *last* AC-DEFINE to be honored. -+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines -+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs -+rm -f confdef2sed.sed - - # This sed command replaces #undef with comments. This is necessary, for - # example, in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. --cat >> conftest.vals <<\EOF --s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% --EOF -- --# Break up conftest.vals because some shells have a limit on --# the size of here documents, and old seds have small limits too. -- -+cat >>conftest.undefs <<\_ACEOF -+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, -+_ACEOF -+ -+# Break up conftest.defines because some shells have a limit on the size -+# of here documents, and old seds have small limits too (100 cmds). -+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS -+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS -+echo ' :' >>$CONFIG_STATUS - rm -f conftest.tail --while : -+while grep . conftest.defines >/dev/null - do -- ac_lines=`grep -c . conftest.vals` -- # grep -c gives empty output for an empty file on some AIX systems. -- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi -- # Write a limited-size here document to conftest.frag. -- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS -- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS -+ # Write a limited-size here document to $tmp/defines.sed. -+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS -+ # Speed up: don't consider the non `#define' lines. -+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS -+ # Work around the forget-to-reset-the-flag bug. -+ echo 't clr' >>$CONFIG_STATUS -+ echo ': clr' >>$CONFIG_STATUS -+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF -- sed -f conftest.frag conftest.in > conftest.out -- rm -f conftest.in -- mv conftest.out conftest.in --' >> $CONFIG_STATUS -- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail -- rm -f conftest.vals -- mv conftest.tail conftest.vals --done --rm -f conftest.vals -- --cat >> $CONFIG_STATUS <<\EOF -- rm -f conftest.frag conftest.h -- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h -- cat conftest.in >> conftest.h -- rm -f conftest.in -- if cmp -s $ac_file conftest.h 2>/dev/null; then -- echo "$ac_file is unchanged" -- rm -f conftest.h -- else -- # Remove last slash and all that follows it. Not all systems have dirname. -- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` -- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then -- # The file is in a subdirectory. -- test ! -d "$ac_dir" && mkdir "$ac_dir" -- fi -- rm -f $ac_file -- mv conftest.h $ac_file -+ sed -f $tmp/defines.sed $tmp/in >$tmp/out -+ rm -f $tmp/in -+ mv $tmp/out $tmp/in -+' >>$CONFIG_STATUS -+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail -+ rm -f conftest.defines -+ mv conftest.tail conftest.defines -+done -+rm -f conftest.defines -+echo ' fi # grep' >>$CONFIG_STATUS -+echo >>$CONFIG_STATUS -+ -+# Break up conftest.undefs because some shells have a limit on the size -+# of here documents, and old seds have small limits too (100 cmds). -+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS -+rm -f conftest.tail -+while grep . conftest.undefs >/dev/null -+do -+ # Write a limited-size here document to $tmp/undefs.sed. -+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS -+ # Speed up: don't consider the non `#undef' -+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS -+ # Work around the forget-to-reset-the-flag bug. -+ echo 't clr' >>$CONFIG_STATUS -+ echo ': clr' >>$CONFIG_STATUS -+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS -+ echo 'CEOF -+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out -+ rm -f $tmp/in -+ mv $tmp/out $tmp/in -+' >>$CONFIG_STATUS -+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail -+ rm -f conftest.undefs -+ mv conftest.tail conftest.undefs -+done -+rm -f conftest.undefs -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ if test x"$ac_file" = x-; then -+ echo "/* Generated by configure. */" >$tmp/config.h -+ else -+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h - fi --fi; done -+ cat $tmp/in >>$tmp/config.h -+ rm -f $tmp/in -+ if test x"$ac_file" != x-; then -+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then -+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -+echo "$as_me: $ac_file is unchanged" >&6;} -+ else -+ ac_dir=`(dirname "$ac_file") 2>/dev/null || -+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$ac_file" : 'X\(//\)[^/]' \| \ -+ X"$ac_file" : 'X\(//\)$' \| \ -+ X"$ac_file" : 'X\(/\)' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X"$ac_file" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -+ /^X\(\/\/\)[^/].*/{ s//\1/; q; } -+ /^X\(\/\/\)$/{ s//\1/; q; } -+ /^X\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` -+ { if $as_mkdir_p; then -+ mkdir -p "$ac_dir" -+ else -+ as_dir="$ac_dir" -+ as_dirs= -+ while test ! -d "$as_dir"; do -+ as_dirs="$as_dir $as_dirs" -+ as_dir=`(dirname "$as_dir") 2>/dev/null || -+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$as_dir" : 'X\(//\)[^/]' \| \ -+ X"$as_dir" : 'X\(//\)$' \| \ -+ X"$as_dir" : 'X\(/\)' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X"$as_dir" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -+ /^X\(\/\/\)[^/].*/{ s//\1/; q; } -+ /^X\(\/\/\)$/{ s//\1/; q; } -+ /^X\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` -+ done -+ test ! -n "$as_dirs" || mkdir $as_dirs -+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -+ { (exit 1); exit 1; }; }; } - --EOF --cat >> $CONFIG_STATUS <<EOF -+ rm -f $ac_file -+ mv $tmp/config.h $ac_file -+ fi -+ else -+ cat $tmp/config.h -+ rm -f $tmp/config.h -+ fi -+done -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF - -+# -+# CONFIG_COMMANDS section. -+# -+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue -+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'` -+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` -+ ac_dir=`(dirname "$ac_dest") 2>/dev/null || -+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$ac_dest" : 'X\(//\)[^/]' \| \ -+ X"$ac_dest" : 'X\(//\)$' \| \ -+ X"$ac_dest" : 'X\(/\)' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X"$ac_dest" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -+ /^X\(\/\/\)[^/].*/{ s//\1/; q; } -+ /^X\(\/\/\)$/{ s//\1/; q; } -+ /^X\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` -+ { if $as_mkdir_p; then -+ mkdir -p "$ac_dir" -+ else -+ as_dir="$ac_dir" -+ as_dirs= -+ while test ! -d "$as_dir"; do -+ as_dirs="$as_dir $as_dirs" -+ as_dir=`(dirname "$as_dir") 2>/dev/null || -+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$as_dir" : 'X\(//\)[^/]' \| \ -+ X"$as_dir" : 'X\(//\)$' \| \ -+ X"$as_dir" : 'X\(/\)' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X"$as_dir" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -+ /^X\(\/\/\)[^/].*/{ s//\1/; q; } -+ /^X\(\/\/\)$/{ s//\1/; q; } -+ /^X\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` -+ done -+ test ! -n "$as_dirs" || mkdir $as_dirs -+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -+ { (exit 1); exit 1; }; }; } -+ -+ ac_builddir=. -+ -+if test "$ac_dir" != .; then -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A "../" for each directory in $ac_dir_suffix. -+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -+else -+ ac_dir_suffix= ac_top_builddir= -+fi -+ -+case $srcdir in -+ .) # No --srcdir option. We are building in place. -+ ac_srcdir=. -+ if test -z "$ac_top_builddir"; then -+ ac_top_srcdir=. -+ else -+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -+ fi ;; -+ [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir ;; -+ *) # Relative path. -+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_builddir$srcdir ;; -+esac -+ -+# Do not use `cd foo && pwd` to compute absolute paths, because -+# the directories may not exist. -+case `pwd` in -+.) ac_abs_builddir="$ac_dir";; -+*) -+ case "$ac_dir" in -+ .) ac_abs_builddir=`pwd`;; -+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -+ *) ac_abs_builddir=`pwd`/"$ac_dir";; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_top_builddir=${ac_top_builddir}.;; -+*) -+ case ${ac_top_builddir}. in -+ .) ac_abs_top_builddir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_srcdir=$ac_srcdir;; -+*) -+ case $ac_srcdir in -+ .) ac_abs_srcdir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -+ esac;; -+esac -+case $ac_abs_builddir in -+.) ac_abs_top_srcdir=$ac_top_srcdir;; -+*) -+ case $ac_top_srcdir in -+ .) ac_abs_top_srcdir=$ac_abs_builddir;; -+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -+ esac;; -+esac -+ -+ -+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -+echo "$as_me: executing $ac_dest commands" >&6;} -+ case $ac_dest in -+ default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;; -+ esac -+done -+_ACEOF - --EOF --cat >> $CONFIG_STATUS <<\EOF --test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h -+cat >>$CONFIG_STATUS <<\_ACEOF - --exit 0 --EOF -+{ (exit 0); exit 0; } -+_ACEOF - chmod +x $CONFIG_STATUS --rm -fr confdefs* $ac_clean_files --test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 -+ac_clean_files=$ac_clean_files_save -+ -+ -+# configure is writing to config.log, and then calls config.status. -+# config.status does its own redirection, appending to config.log. -+# Unfortunately, on DOS this fails, as config.log is still kept open -+# by configure, so config.status won't be able to write to it; its -+# output is simply discarded. So we exec the FD to /dev/null, -+# effectively closing config.log, so it can be properly (re)opened and -+# appended to by config.status. When coming back to configure, we -+# need to make the FD available again. -+if test "$no_create" != yes; then -+ ac_cs_success=: -+ ac_config_status_args= -+ test "$silent" = yes && -+ ac_config_status_args="$ac_config_status_args --quiet" -+ exec 5>/dev/null -+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false -+ exec 5>>config.log -+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which -+ # would make configure fail if this is the last instruction. -+ $ac_cs_success || { (exit 1); exit 1; } -+fi - ---- blackbox-0.65.0.orig/configure.in -+++ blackbox-0.65.0/configure.in -@@ -106,6 +106,38 @@ - - LIBS="$LIBS $Xext_lib" - -+LIBS="$LIBS $X_EXTRA_LIBS" -+ -+Xext_lib="" -+ -+dnl Check for Xinerama extension support and proper library files. -+XINERAMA="" -+AC_MSG_CHECKING([whether to build support for the Xinerama extension]) -+AC_ARG_ENABLE( -+ xinerama, [ --enable-xinerama enable support of the xinerama extension [default=yes]]) -+ -+: ${enableval="yes"} -+if test x$enableval = "xyes"; then -+ AC_MSG_RESULT([yes]) -+ AC_CHECK_LIB(Xinerama, XineramaQueryScreens, -+ AC_MSG_CHECKING([for X11/extensions/Xinerama.h]) -+ AC_TRY_LINK( -+#include <X11/Xlib.h> -+#include <X11/Xutil.h> -+#include <X11/extensions/Xinerama.h> -+, XineramaScreenInfo* s = 0, -+ AC_MSG_RESULT([yes]) -+ XINERAMA="-DXINERAMA"; Xext_lib="-lXext -lXinerama", -+ AC_MSG_RESULT([no]) -+ ) -+ ) -+else -+ AC_MSG_RESULT([no]) -+fi -+AC_SUBST(XINERAMA) -+ -+LIBS="$LIBS $Xext_lib" -+ - dnl Check for ordered 8bpp dithering - ORDEREDPSEUDO="" - AC_MSG_CHECKING([whether to include Pseudocolor ordered dithering code]) ---- blackbox-0.65.0.orig/doc/blackbox.1.in -+++ blackbox-0.65.0/doc/blackbox.1.in -@@ -786,6 +786,13 @@ - .EX - .B Default is False. - .EE -+.TP 3 -+.BI "session.screen<num>.slit.xineramaPlacement" " [True|False]" -+Determines whether Xinerama inforation should be used to -+avoid placing the slit in non-viewable regions of the display. -+.EX -+.B Default is True. -+.EE - .\" - .\" ***** MENU CONFIGURABLE FROM MAIN MENU ***** - .\" -@@ -845,6 +852,24 @@ - .B Default is TopToBottom. - .EE - .TP 3 -+.BI "session.screen<num>.xineramaPlacement" " [True|False]" -+Use Xinerama information when deciding where to place windows. -+.EX -+.B Default is True. -+.EE -+.TP 3 -+.BI "session.screen<num>.xineramaMenus" " [True|False]" -+Use Xinerama information to avoid menus spanning screen boundaries. -+.EX -+.B Default is True. -+.EE -+.TP 3 -+.BI "session.screen<num>.xineramaMaximize" " [True|False]" -+Maximize windows to fill one screen when Xineramam is in use. -+.EX -+.B Default is True. -+.EE -+.TP 3 - .BI "session.imageDither" " [True|False]" - This setting is only used when running in low - color modes. Image Dithering helps to show an -@@ -951,6 +976,19 @@ - .EX - .B Default is False. - .EE -+.TP 3 -+.BI "session.screen<num>.toolbar.xineramaPlacement" " [True|False]" -+Use Xinerama information to prevent toolbar from being split -+across screens. -+.EX -+.B Default is True. -+.EE -+.TP 3 -+.BI "session.screen<num>.toolbar.xineramaScreen" " [integer]" -+Xinerama screen number in which to place the toolbar. -+.EX -+.B Default is -1 (auto). -+.EE - .\" - .\" ***** CONFIGURABLE IN BLACKBOXRC ONLY ***** - .\" ---- blackbox-0.65.0.orig/nls/C/Configmenu.m -+++ blackbox-0.65.0/nls/C/Configmenu.m -@@ -40,3 +40,13 @@ - # Top to Bottom - $ #BottomTop - # Bottom to Top -+$ #XineramaOptions -+# Xinerama Options -+$ #XineramaPlacement -+# Window Placement -+$ #XineramaMaximize -+# Window Maximizing -+$ #XineramaToolbar -+# Toolbar Placement -+$ #XineramaMenus -+# Menu Placement ---- blackbox-0.65.0.orig/nls/C/Toolbar.m -+++ blackbox-0.65.0/nls/C/Toolbar.m -@@ -20,3 +20,7 @@ - # Edit current workspace name - $ #ToolbarPlacement - # Toolbar Placement -+$ #ScreenTop -+# Screen %d Top -+$ #ScreenBottom -+# Screen %d Bottom ---- blackbox-0.65.0.orig/nls/convert.awk -+++ blackbox-0.65.0/nls/convert.awk -@@ -4,6 +4,8 @@ - - if (major > 1) - printf "\n" > output -+ else if (codeset) -+ printf "$ codeset=%s\n", codeset > output - printf "$set %d %s\n", major, $3 > output - - if (header) { ---- blackbox-0.65.0.orig/nls/da_DK/Makefile.am -+++ blackbox-0.65.0/nls/da_DK/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/da_DK/Makefile.in -+++ blackbox-0.65.0/nls/da_DK/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/de_DE/Makefile.am -+++ blackbox-0.65.0/nls/de_DE/Makefile.am -@@ -26,7 +26,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/de_DE/Makefile.in -+++ blackbox-0.65.0/nls/de_DE/Makefile.in -@@ -200,7 +200,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/es_ES/Makefile.am -+++ blackbox-0.65.0/nls/es_ES/Makefile.am -@@ -28,7 +28,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/es_ES/Makefile.in -+++ blackbox-0.65.0/nls/es_ES/Makefile.in -@@ -202,7 +202,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/fr_FR/Makefile.am -+++ blackbox-0.65.0/nls/fr_FR/Makefile.am -@@ -26,7 +26,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/fr_FR/Makefile.in -+++ blackbox-0.65.0/nls/fr_FR/Makefile.in -@@ -200,7 +200,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/hu_HU/Makefile.am -+++ blackbox-0.65.0/nls/hu_HU/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-2 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/hu_HU/Makefile.in -+++ blackbox-0.65.0/nls/hu_HU/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-2 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/it_IT/Makefile.am -+++ blackbox-0.65.0/nls/it_IT/Makefile.am -@@ -26,7 +26,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/it_IT/Makefile.in -+++ blackbox-0.65.0/nls/it_IT/Makefile.in -@@ -200,7 +200,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/ja_JP/Makefile.am -+++ blackbox-0.65.0/nls/ja_JP/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=eucJP output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/ja_JP/Makefile.in -+++ blackbox-0.65.0/nls/ja_JP/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=eucJP output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/ko_KR/Makefile.am -+++ blackbox-0.65.0/nls/ko_KR/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=eucKR output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/ko_KR/Makefile.in -+++ blackbox-0.65.0/nls/ko_KR/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=eucKR output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/nl_NL/Makefile.am -+++ blackbox-0.65.0/nls/nl_NL/Makefile.am -@@ -26,7 +26,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/nl_NL/Makefile.in -+++ blackbox-0.65.0/nls/nl_NL/Makefile.in -@@ -200,7 +200,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/no_NO/Makefile.am -+++ blackbox-0.65.0/nls/no_NO/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/no_NO/Makefile.in -+++ blackbox-0.65.0/nls/no_NO/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/pt_BR/Makefile.am -+++ blackbox-0.65.0/nls/pt_BR/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/pt_BR/Makefile.in -+++ blackbox-0.65.0/nls/pt_BR/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/ru_RU/Makefile.am -+++ blackbox-0.65.0/nls/ru_RU/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=KOI8-R output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/ru_RU/Makefile.in -+++ blackbox-0.65.0/nls/ru_RU/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=KOI8-R output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/sl_SI/Makefile.am -+++ blackbox-0.65.0/nls/sl_SI/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-2 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/sl_SI/Makefile.in -+++ blackbox-0.65.0/nls/sl_SI/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-2 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/sv_SE/Makefile.am -+++ blackbox-0.65.0/nls/sv_SE/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/sv_SE/Makefile.in -+++ blackbox-0.65.0/nls/sv_SE/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/uk_UA/Makefile.am -+++ blackbox-0.65.0/nls/uk_UA/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=KOI8-U output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/uk_UA/Makefile.in -+++ blackbox-0.65.0/nls/uk_UA/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=KOI8-U output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/zh_CN/Makefile.am -+++ blackbox-0.65.0/nls/zh_CN/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=GB2312 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/zh_CN/Makefile.in -+++ blackbox-0.65.0/nls/zh_CN/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=GB2312 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/zh_TW/Makefile.am -+++ blackbox-0.65.0/nls/zh_TW/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=BIG5 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/zh_TW/Makefile.in -+++ blackbox-0.65.0/nls/zh_TW/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=BIG5 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/es_AR/Makefile.am -+++ blackbox-0.65.0/nls/es_AR/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/es_AR/Makefile.in -+++ blackbox-0.65.0/nls/es_AR/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-1 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/pl_PL/Makefile.in -+++ blackbox-0.65.0/nls/pl_PL/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-2 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/pl_PL/Makefile.am -+++ blackbox-0.65.0/nls/pl_PL/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-2 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/sk_SK/Makefile.am -+++ blackbox-0.65.0/nls/sk_SK/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk convert=ISO-8859-2 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/sk_SK/Makefile.in -+++ blackbox-0.65.0/nls/sk_SK/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-2 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/lv_LV/Makefile.am -+++ blackbox-0.65.0/nls/lv_LV/Makefile.am -@@ -23,7 +23,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-13 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/nls/lv_LV/Makefile.in -+++ blackbox-0.65.0/nls/lv_LV/Makefile.in -@@ -197,7 +197,7 @@ - - Translation.m: $(MFILES) - @if test x$(NLSTEST) = "x-DNLS"; then \ -- awk -f @srcdir@/../convert.awk output=Translation.m $(MFILES); \ -+ awk -f @srcdir@/../convert.awk codeset=ISO-8859-13 output=Translation.m $(MFILES); \ - fi - - blackbox.cat: Translation.m ---- blackbox-0.65.0.orig/src/BaseDisplay.cc -+++ blackbox-0.65.0/src/BaseDisplay.cc -@@ -86,6 +86,7 @@ - #include "GCCache.hh" - #include "Timer.hh" - #include "Util.hh" -+#include "Xinerama.hh" - - - // X error handler to handle any and all X errors while the application is -@@ -400,9 +401,8 @@ - } - - --ScreenInfo::ScreenInfo(BaseDisplay *d, unsigned int num) { -- basedisplay = d; -- screen_number = num; -+ScreenInfo::ScreenInfo(BaseDisplay *d, unsigned int num) -+ : basedisplay(d), screen_number(num), xinerama_info(0) { - - root_window = RootWindow(basedisplay->getXDisplay(), screen_number); - -@@ -465,4 +465,12 @@ - - display_string = string("DISPLAY=") + default_string + '.' + - itostring(static_cast<unsigned long>(screen_number)); -+ -+#ifdef XINERAMA -+ xinerama_info = new XineramaInfo(this); -+ if (! xinerama_info->haveXinerama()) { -+ delete xinerama_info; -+ xinerama_info = 0; -+ } -+#endif - } ---- blackbox-0.65.0.orig/src/BaseDisplay.hh -+++ blackbox-0.65.0/src/BaseDisplay.hh -@@ -35,6 +35,7 @@ - // forward declaration - class BaseDisplay; - class BGCCache; -+class XineramaInfo; - - #include "Timer.hh" - #include "Util.hh" -@@ -51,11 +52,14 @@ - std::string display_string; - Rect rect; - -+ XineramaInfo* xinerama_info; -+ - public: - ScreenInfo(BaseDisplay *d, unsigned int num); - - inline BaseDisplay *getBaseDisplay(void) const { return basedisplay; } - inline Visual *getVisual(void) const { return visual; } -+ inline XineramaInfo *getXineramaInfo(void) const { return xinerama_info; } - inline Window getRootWindow(void) const { return root_window; } - inline Colormap getColormap(void) const { return colormap; } - inline int getDepth(void) const { return depth; } ---- blackbox-0.65.0.orig/src/Basemenu.cc -+++ blackbox-0.65.0/src/Basemenu.cc -@@ -49,6 +49,7 @@ - #include "Image.hh" - #include "Screen.hh" - #include "Util.hh" -+#include "Xinerama.hh" - - using std::string; - using std::min; -@@ -478,6 +479,29 @@ - drawSubmenu(which_sub); - } - -+void Basemenu::moveInScreen(int screen_x, int screen_y, int dx, int dy) { -+ int x = screen_x + dx; -+ int y = screen_y + dy; -+ -+ Rect rect = screen->getRect(); -+ if (screen->getXineramaInfo() && screen->doXineramaMenus()) { -+ XineramaScreen xinerama = screen->getXineramaInfo()-> -+ screenContaining(screen_x, screen_y); -+ if (xinerama.isValid()) { -+ rect = xinerama.getRect(); -+ } -+ } -+ -+ if (x < rect.left()) x = rect.left(); -+ if (y < rect.top()) y = rect.top(); -+ -+ if (x + static_cast<signed>(getWidth()) > rect.right()) -+ x = rect.right() - getWidth() - screen->getBorderWidth(); -+ if (y + static_cast<signed>(getHeight()) > rect.bottom()) -+ y = rect.bottom() - getHeight() - screen->getBorderWidth(); -+ -+ move(x,y); -+} - - void Basemenu::redrawTitle(void) { - const char *text = (! menu.label.empty()) ? getLabel() : -@@ -559,16 +583,24 @@ - y = (((shifted) ? menu.y_shift : menu.y) + - menu.height - submenu->menu.height); - -- if ((x + submenu->getWidth()) > screen->getWidth()) -+ Rect rect = screen->getRect(); -+ if (screen->getXineramaInfo() && screen->doXineramaMenus()) { -+ XineramaScreen scr = -+ screen->getXineramaInfo()->screenContaining(menu.x, menu.y); -+ if (scr.isValid()) -+ rect = scr.getRect(); -+ } -+ -+ if ((x + static_cast<signed>(submenu->getWidth())) > rect.right()) - x = ((shifted) ? menu.x_shift : menu.x) - - submenu->getWidth() - screen->getBorderWidth(); - -- if (x < 0) x = 0; -+ if (x < rect.left()) x = rect.left(); - -- if ((y + submenu->getHeight()) > screen->getHeight()) -- y = screen->getHeight() - submenu->getHeight() - -+ if ((y + static_cast<signed>(submenu->getHeight())) > rect.bottom()) -+ y = rect.bottom() - submenu->getHeight() - - (screen->getBorderWidth() * 2); -- if (y < 0) y = 0; -+ if (y < rect.top()) y = rect.top(); - - submenu->move(x, y); - if (! moving) drawItem(index, True); -@@ -961,22 +993,32 @@ - - void Basemenu::enterNotifyEvent(XCrossingEvent *ce) { - if (ce->window == menu.frame) { -+ -+ Rect rect = screen->getRect(); -+#if 0 -+ if (screen->getXineramaInfo() && screen->doXineramaMenus()) { -+ XineramaScreen xin_scr = -+ screen->getXineramaInfo()->screenContaining(menu.x, menu.y); -+ if (xin_scr.isValid()) { -+ rect = xin_scr.getRect(); -+ } -+ } -+#endif -+ - menu.x_shift = menu.x, menu.y_shift = menu.y; -- if (menu.x + menu.width > screen->getWidth()) { -- menu.x_shift = screen->getWidth() - menu.width - -- screen->getBorderWidth(); -+ if (menu.x + static_cast<signed>(menu.width) > rect.right()) { -+ menu.x_shift = rect.right() - menu.width - screen->getBorderWidth(); - shifted = True; -- } else if (menu.x < 0) { -- menu.x_shift = -screen->getBorderWidth(); -+ } else if (menu.x < rect.left()) { -+ menu.x_shift = rect.left() - screen->getBorderWidth(); - shifted = True; - } - -- if (menu.y + menu.height > screen->getHeight()) { -- menu.y_shift = screen->getHeight() - menu.height - -- screen->getBorderWidth(); -+ if (menu.y + static_cast<signed>(menu.height) > rect.bottom()) { -+ menu.y_shift = rect.bottom() - menu.height - screen->getBorderWidth(); - shifted = True; -- } else if (menu.y + static_cast<signed>(menu.title_h) < 0) { -- menu.y_shift = -screen->getBorderWidth(); -+ } else if (menu.y + static_cast<signed>(menu.title_h) < rect.top()) { -+ menu.y_shift = rect.top() - screen->getBorderWidth(); - shifted = True; - } - ---- blackbox-0.65.0.orig/src/Basemenu.hh -+++ blackbox-0.65.0/src/Basemenu.hh -@@ -129,6 +129,7 @@ - void reconfigure(void); - void setLabel(const std::string& label); - void move(int x, int y); -+ void moveInScreen(int screen_x, int screen_y, int dx = 0, int dy = 0); - void update(void); - void setItemSelected(int index, bool sel); - void setItemEnabled(int index, bool enable); ---- blackbox-0.65.0.orig/src/Configmenu.cc -+++ blackbox-0.65.0/src/Configmenu.cc -@@ -36,13 +36,21 @@ - setLabel(i18n(ConfigmenuSet, ConfigmenuConfigOptions, "Config options")); - setInternalMenu(); - -+ int position = 2; - focusmenu = new Focusmenu(this); - placementmenu = new Placementmenu(this); -+ xineramamenu = 0; - - insert(i18n(ConfigmenuSet, ConfigmenuFocusModel, - "Focus Model"), focusmenu); - insert(i18n(ConfigmenuSet, ConfigmenuWindowPlacement, - "Window Placement"), placementmenu); -+ if (scr->getXineramaInfo()) { -+ xineramamenu = new XineramaMenu(this); -+ insert(i18n(ConfigmenuSet, ConfigmenuXineramaOptions, -+ "Xinerama Options"), xineramamenu); -+ position++; -+ } - insert(i18n(ConfigmenuSet, ConfigmenuImageDithering, - "Image Dithering"), 1); - insert(i18n(ConfigmenuSet, ConfigmenuOpaqueMove, -@@ -57,18 +65,19 @@ - "Disable Bindings with Scroll Lock"), 6); - update(); - -- setItemSelected(2, getScreen()->getImageControl()->doDither()); -- setItemSelected(3, getScreen()->doOpaqueMove()); -- setItemSelected(4, getScreen()->doFullMax()); -- setItemSelected(5, getScreen()->doFocusNew()); -- setItemSelected(6, getScreen()->doFocusLast()); -- setItemSelected(7, getScreen()->allowScrollLock()); -+ setItemSelected(position++, getScreen()->getImageControl()->doDither()); -+ setItemSelected(position++, getScreen()->doOpaqueMove()); -+ setItemSelected(position++, getScreen()->doFullMax()); -+ setItemSelected(position++, getScreen()->doFocusNew()); -+ setItemSelected(position++, getScreen()->doFocusLast()); -+ setItemSelected(position++, getScreen()->allowScrollLock()); - } - - - Configmenu::~Configmenu(void) { - delete focusmenu; - delete placementmenu; -+ delete xineramamenu; - } - - -@@ -132,7 +141,8 @@ - void Configmenu::reconfigure(void) { - focusmenu->reconfigure(); - placementmenu->reconfigure(); -- -+ if (xineramamenu) -+ xineramamenu->reconfigure(); - Basemenu::reconfigure(); - } - -@@ -319,3 +329,59 @@ - - reconfigure(); - } -+ -+ -+Configmenu::XineramaMenu::XineramaMenu(Configmenu* cm) -+ : Basemenu(cm->getScreen()) { -+ setLabel(i18n(ConfigmenuSet, ConfigmenuXineramaOptions, "Xinerama Options")); -+ setInternalMenu(); -+ -+ insert(i18n(ConfigmenuSet, ConfigmenuXineramaPlacement, "Window Placement"), -+ ConfigmenuXineramaPlacement); -+ insert(i18n(ConfigmenuSet, ConfigmenuXineramaMaximize, "Window Maximizing"), -+ ConfigmenuXineramaMaximize); -+ insert(i18n(ConfigmenuSet, ConfigmenuXineramaToolbar, "Toolbar Placement"), -+ ConfigmenuXineramaToolbar); -+ insert(i18n(ConfigmenuSet, ConfigmenuXineramaMenus, "Menu Placement"), -+ ConfigmenuXineramaMenus); -+ update(); -+ -+ setItemSelected(0, getScreen()->doXineramaPlacement()); -+ setItemSelected(1, getScreen()->doXineramaMaximize()); -+ setItemSelected(2, getScreen()->doXineramaToolbar()); -+ setItemSelected(3, getScreen()->doXineramaMenus()); -+} -+ -+ -+void Configmenu::XineramaMenu::itemSelected(int button, unsigned int index) { -+ if (button != 1) -+ return; -+ -+ switch (find(index)->function()) { -+ -+ case ConfigmenuXineramaPlacement : { -+ getScreen()->saveXineramaPlacement(! getScreen()->doXineramaPlacement()); -+ setItemSelected(index, getScreen()->doXineramaPlacement()); -+ break; -+ } -+ -+ case ConfigmenuXineramaMaximize : { -+ getScreen()->saveXineramaMaximize(! getScreen()->doXineramaMaximize()); -+ setItemSelected(index, getScreen()->doXineramaMaximize()); -+ break; -+ } -+ -+ case ConfigmenuXineramaToolbar : { -+ getScreen()->saveXineramaToolbar(! getScreen()->doXineramaToolbar()); -+ setItemSelected(index, getScreen()->doXineramaToolbar()); -+ getScreen()->getToolbar()->reconfigure(); -+ break; -+ } -+ -+ case ConfigmenuXineramaMenus : { -+ getScreen()->saveXineramaMenus(! getScreen()->doXineramaMenus()); -+ setItemSelected(index, getScreen()->doXineramaMenus()); -+ break; -+ } -+ } -+} ---- blackbox-0.65.0.orig/src/Configmenu.hh -+++ blackbox-0.65.0/src/Configmenu.hh -@@ -58,8 +58,21 @@ - virtual void reconfigure(void); - }; - -+ class XineramaMenu : public Basemenu { -+ private: -+ XineramaMenu(const XineramaMenu&); -+ XineramaMenu& operator=(const XineramaMenu&); -+ -+ protected: -+ virtual void itemSelected(int button, unsigned int index); -+ -+ public: -+ XineramaMenu(Configmenu *cm); -+ }; -+ - Focusmenu *focusmenu; - Placementmenu *placementmenu; -+ XineramaMenu* xineramamenu; - - friend class Focusmenu; - friend class Placementmenu; -@@ -76,6 +89,7 @@ - - inline Basemenu *getFocusmenu(void) { return focusmenu; } - inline Basemenu *getPlacementmenu(void) { return placementmenu; } -+ inline Basemenu *getXineramamenu(void) { return xineramamenu; } - - void reconfigure(void); - }; ---- blackbox-0.65.0.orig/src/Makefile.in -+++ blackbox-0.65.0/src/Makefile.in -@@ -87,6 +87,7 @@ - ORDEREDPSEUDO = @ORDEREDPSEUDO@ - PACKAGE = @PACKAGE@ - SHAPE = @SHAPE@ -+XINERAMA = @XINERAMA@ - TIMEDCACHE = @TIMEDCACHE@ - VERSION = @VERSION@ - gencat_cmd = @gencat_cmd@ -@@ -95,7 +96,7 @@ - DEFAULT_MENU = $(pkgdatadir)/menu - DEFAULT_STYLE = $(pkgdatadir)/styles/Results - --CPPFLAGS = @CPPFLAGS@ @SHAPE@ @ORDEREDPSEUDO@ @DEBUG@ @NLS@ @TIMEDCACHE@ -DLOCALEPATH=\"$(pkgdatadir)/nls\" -DDEFAULTMENU=\"$(DEFAULT_MENU)\" -DDEFAULTSTYLE=\"$(DEFAULT_STYLE)\" -+CPPFLAGS = @CPPFLAGS@ @SHAPE@ @XINERAMA@ @ORDEREDPSEUDO@ @DEBUG@ @NLS@ @TIMEDCACHE@ -DLOCALEPATH=\"$(pkgdatadir)/nls\" -DDEFAULTMENU=\"$(DEFAULT_MENU)\" -DDEFAULTSTYLE=\"$(DEFAULT_STYLE)\" - - - bin_PROGRAMS = blackbox -@@ -119,7 +120,8 @@ - blackbox_OBJECTS = BaseDisplay.o Basemenu.o Clientmenu.o Color.o \ - Configmenu.o GCCache.o Iconmenu.o Image.o ImageControl.o Netizen.o \ - Rootmenu.o Screen.o Slit.o Texture.o Timer.o Toolbar.o Util.o Window.o \ --Windowmenu.o Workspace.o Workspacemenu.o blackbox.o i18n.o main.o -+Windowmenu.o Workspace.o Workspacemenu.o Xinerama.o \ -+blackbox.o i18n.o main.o - blackbox_LDADD = $(LDADD) - blackbox_DEPENDENCIES = - blackbox_LDFLAGS = -@@ -321,11 +323,11 @@ - - BaseDisplay.o: BaseDisplay.cc ../config.h i18n.hh \ - ../nls/blackbox-nls.hh BaseDisplay.hh Timer.hh GCCache.hh Color.hh \ -- Util.hh -+ Util.hh Xinerama.hh - Basemenu.o: Basemenu.cc ../config.h i18n.hh ../nls/blackbox-nls.hh \ - blackbox.hh BaseDisplay.hh Timer.hh Basemenu.hh GCCache.hh Color.hh \ - Image.hh Screen.hh Texture.hh Util.hh Configmenu.hh Iconmenu.hh \ -- Netizen.hh Rootmenu.hh Workspace.hh Workspacemenu.hh -+ Netizen.hh Rootmenu.hh Workspace.hh Workspacemenu.hh Xinerama.hh - Clientmenu.o: Clientmenu.cc ../config.h blackbox.hh i18n.hh \ - ../nls/blackbox-nls.hh BaseDisplay.hh Timer.hh Clientmenu.hh \ - Basemenu.hh Screen.hh Color.hh Texture.hh Util.hh Configmenu.hh \ -@@ -375,13 +377,13 @@ - blackbox.hh BaseDisplay.hh Timer.hh Clientmenu.hh Basemenu.hh \ - GCCache.hh Color.hh Iconmenu.hh Image.hh Rootmenu.hh Screen.hh \ - Texture.hh Util.hh Configmenu.hh Netizen.hh Workspace.hh \ -- Workspacemenu.hh Toolbar.hh Window.hh Windowmenu.hh Slit.hh -+ Workspacemenu.hh Toolbar.hh Window.hh Windowmenu.hh Slit.hh Xinerama.hh - Util.o: Util.cc ../config.h Util.hh - Window.o: Window.cc ../config.h i18n.hh ../nls/blackbox-nls.hh \ - blackbox.hh BaseDisplay.hh Timer.hh GCCache.hh Color.hh Iconmenu.hh \ - Basemenu.hh Image.hh Screen.hh Texture.hh Util.hh Configmenu.hh \ - Netizen.hh Rootmenu.hh Workspace.hh Workspacemenu.hh Toolbar.hh \ -- Window.hh Windowmenu.hh Slit.hh -+ Window.hh Windowmenu.hh Slit.hh Xinerama.hh - Windowmenu.o: Windowmenu.cc ../config.h i18n.hh ../nls/blackbox-nls.hh \ - blackbox.hh BaseDisplay.hh Timer.hh Screen.hh Color.hh Texture.hh \ - Util.hh Configmenu.hh Basemenu.hh Iconmenu.hh Netizen.hh Rootmenu.hh \ -@@ -390,11 +392,12 @@ - blackbox.hh BaseDisplay.hh Timer.hh Clientmenu.hh Basemenu.hh \ - Netizen.hh Screen.hh Color.hh Texture.hh Util.hh Configmenu.hh \ - Iconmenu.hh Rootmenu.hh Workspace.hh Workspacemenu.hh Toolbar.hh \ -- Window.hh Windowmenu.hh -+ Window.hh Windowmenu.hh Xinerama.hh - Workspacemenu.o: Workspacemenu.cc ../config.h i18n.hh \ - ../nls/blackbox-nls.hh blackbox.hh BaseDisplay.hh Timer.hh Screen.hh \ - Color.hh Texture.hh Util.hh Configmenu.hh Basemenu.hh Iconmenu.hh \ - Netizen.hh Rootmenu.hh Workspace.hh Workspacemenu.hh Toolbar.hh -+Xinerama.o: Xinerama.cc ../config.h Util.hh Xinerama.hh - blackbox.o: blackbox.cc ../config.h i18n.hh ../nls/blackbox-nls.hh \ - blackbox.hh BaseDisplay.hh Timer.hh Basemenu.hh Clientmenu.hh \ - GCCache.hh Color.hh Image.hh Rootmenu.hh Screen.hh Texture.hh Util.hh \ ---- blackbox-0.65.0.orig/src/Screen.cc -+++ blackbox-0.65.0/src/Screen.cc -@@ -998,6 +998,9 @@ - - *(session_stack + i++) = configmenu->getFocusmenu()->getWindowID(); - *(session_stack + i++) = configmenu->getPlacementmenu()->getWindowID(); -+ if (configmenu->getXineramamenu()) -+ *(session_stack + i++) = configmenu->getXineramamenu()->getWindowID(); -+ - *(session_stack + i++) = configmenu->getWindowID(); - - *(session_stack + i++) = slit->getMenu()->getDirectionmenu()->getWindowID(); -@@ -1704,38 +1707,18 @@ - if (rootmenu->isVisible()) - rootmenu->hide(); - } else if (xbutton->button == 2) { -- int mx = xbutton->x_root - (workspacemenu->getWidth() / 2); -- int my = xbutton->y_root - (workspacemenu->getTitleHeight() / 2); -- -- if (mx < 0) mx = 0; -- if (my < 0) my = 0; -- -- if (mx + workspacemenu->getWidth() > getWidth()) -- mx = getWidth() - workspacemenu->getWidth() - getBorderWidth(); -- -- if (my + workspacemenu->getHeight() > getHeight()) -- my = getHeight() - workspacemenu->getHeight() - getBorderWidth(); -- -- workspacemenu->move(mx, my); -+ workspacemenu->moveInScreen(xbutton->x_root, xbutton->y_root, -+ -static_cast<signed>(workspacemenu->getWidth()) / 2, -+ -static_cast<signed>(workspacemenu->getTitleHeight()) / 2); - - if (! workspacemenu->isVisible()) { - workspacemenu->removeParent(); - workspacemenu->show(); - } - } else if (xbutton->button == 3) { -- int mx = xbutton->x_root - (rootmenu->getWidth() / 2); -- int my = xbutton->y_root - (rootmenu->getTitleHeight() / 2); -- -- if (mx < 0) mx = 0; -- if (my < 0) my = 0; -- -- if (mx + rootmenu->getWidth() > getWidth()) -- mx = getWidth() - rootmenu->getWidth() - getBorderWidth(); -- -- if (my + rootmenu->getHeight() > getHeight()) -- my = getHeight() - rootmenu->getHeight() - getBorderWidth(); -- -- rootmenu->move(mx, my); -+ rootmenu->moveInScreen(xbutton->x_root, xbutton->y_root, -+ -static_cast<signed>(rootmenu->getWidth()) / 2, -+ -static_cast<signed>(rootmenu->getTitleHeight()) / 2); - - if (! rootmenu->isVisible()) { - blackbox->checkMenu(); ---- blackbox-0.65.0.orig/src/Screen.hh -+++ blackbox-0.65.0/src/Screen.hh -@@ -149,15 +149,16 @@ - - bool toolbar_on_top, toolbar_auto_hide, sloppy_focus, auto_raise, - auto_edge_balance, image_dither, ordered_dither, opaque_move, full_max, -- focus_new, focus_last, click_raise, allow_scroll_lock; -+ focus_new, focus_last, click_raise, allow_scroll_lock, -+ xinerama_placement, xinerama_maximize, xinerama_menus, xinerama_toolbar; - BColor border_color; - XrmDatabase stylerc; - - unsigned int workspaces; - int toolbar_placement, toolbar_width_percent, placement_policy, -- edge_snap_threshold, row_direction, col_direction; -+ edge_snap_threshold, row_direction, col_direction, toolbar_xin_screen; - -- bool slit_on_top, slit_auto_hide; -+ bool slit_on_top, slit_auto_hide, xinerama_slit; - int slit_placement, slit_direction; - - unsigned int handle_width, bevel_width, frame_width, border_width; -@@ -224,6 +225,16 @@ - inline bool doFocusNew(void) const { return resource.focus_new; } - inline bool doFocusLast(void) const { return resource.focus_last; } - inline bool allowScrollLock(void) const { return resource.allow_scroll_lock;} -+ inline bool doXineramaPlacement(void) const -+ { return resource.xinerama_placement; } -+ inline bool doXineramaMaximize(void) const -+ { return resource.xinerama_maximize; } -+ inline bool doXineramaMenus(void) const -+ { return resource.xinerama_menus; } -+ inline bool doXineramaToolbar(void) const -+ { return resource.xinerama_toolbar; } -+ inline bool doXineramaSlit(void) const -+ { return resource.xinerama_slit; } - - inline const GC &getOpGC(void) const { return opGC; } - -@@ -281,6 +292,8 @@ - { return resource.row_direction; } - inline int getColPlacementDirection(void) const - { return resource.col_direction; } -+ inline int getXineramaToolbarScreen(void) const -+ { return resource.toolbar_xin_screen; } - - inline void setRootColormapInstalled(bool r) { root_colormap_installed = r; } - inline void saveSloppyFocus(bool s) { resource.sloppy_focus = s; } -@@ -295,6 +308,8 @@ - inline void savePlacementPolicy(int p) { resource.placement_policy = p; } - inline void saveRowPlacementDirection(int d) { resource.row_direction = d; } - inline void saveColPlacementDirection(int d) { resource.col_direction = d; } -+ inline void saveXineramaToolbarScreen(int s) -+ { resource.toolbar_xin_screen = s;} - inline void saveEdgeSnapThreshold(int t) - { resource.edge_snap_threshold = t; } - inline void saveImageDither(bool d) { resource.image_dither = d; } -@@ -303,6 +318,13 @@ - inline void saveFocusNew(bool f) { resource.focus_new = f; } - inline void saveFocusLast(bool f) { resource.focus_last = f; } - inline void saveAllowScrollLock(bool a) { resource.allow_scroll_lock = a; } -+ inline void saveXineramaPlacement(bool p) { resource.xinerama_placement = p; } -+ inline void saveXineramaMaximize(bool m) { resource.xinerama_maximize = m; } -+ inline void saveXineramaMenus(bool m) { resource.xinerama_menus = m; } -+ inline void saveXineramaToolbar(bool t) { resource.xinerama_toolbar = t; } -+ inline void saveXinaramaToolbarScreen(int s) -+ { resource.toolbar_xin_screen = s; } -+ inline void saveXineramaSlit(bool s) { resource.xinerama_slit = s; } - - inline void iconUpdate(void) { iconmenu->update(); } - ---- blackbox-0.65.0.orig/src/Slit.cc -+++ blackbox-0.65.0/src/Slit.cc -@@ -35,6 +35,7 @@ - #include "Screen.hh" - #include "Slit.hh" - #include "Toolbar.hh" -+#include "Xinerama.hh" - - - Slit::Slit(BScreen *scr) { -@@ -481,6 +482,29 @@ - - frame.rect.setPos(x, y); - -+ if (screen->getXineramaInfo() && screen->doXineramaSlit()) { -+ XineramaScreen scr = screen->getXineramaInfo()->screenContaining(frame.rect); -+ if (!scr.isValid()) { -+ scr = screen->getXineramaInfo()->getClosestScreen(x,y); -+ } -+ -+ if (scr.isValid() && (scr.getRect() & frame.rect) != frame.rect) { -+ int w = static_cast<signed>(frame.rect.width()); -+ if (x < scr.getRect().left()) -+ x = scr.getRect().left(); -+ else if (x + w > scr.getRect().right()) -+ x = scr.getRect().right() - w; -+ -+ int h = static_cast<signed>(frame.rect.height()); -+ if (y < scr.getRect().top()) -+ y = scr.getRect().top(); -+ else if (y + h > scr.getRect().bottom()) -+ y = scr.getRect().bottom() - h; -+ -+ frame.rect.setPos(x, y); -+ } -+ } -+ - // we have to add the border to the rect as it is not accounted for - Rect tbar_rect = screen->getToolbar()->getRect(); - tbar_rect.setSize(tbar_rect.width() + (screen->getBorderWidth() * 2), -@@ -536,22 +560,9 @@ - XLowerWindow(display, frame.window); - } else if (e->button == Button3) { - if (! slitmenu->isVisible()) { -- int x, y; -- -- x = e->x_root - (slitmenu->getWidth() / 2); -- y = e->y_root - (slitmenu->getHeight() / 2); -- -- if (x < 0) -- x = 0; -- else if (x + slitmenu->getWidth() > screen->getWidth()) -- x = screen->getWidth() - slitmenu->getWidth(); -- -- if (y < 0) -- y = 0; -- else if (y + slitmenu->getHeight() > screen->getHeight()) -- y = screen->getHeight() - slitmenu->getHeight(); -- -- slitmenu->move(x, y); -+ slitmenu->moveInScreen(e->x_root, e->y_root, -+ -static_cast<signed>(slitmenu->getWidth()) / 2, -+ -static_cast<signed>(slitmenu->getHeight()) / 2); - slitmenu->show(); - } else { - slitmenu->hide(); ---- blackbox-0.65.0.orig/src/Timer.hh -+++ blackbox-0.65.0/src/Timer.hh -@@ -98,9 +98,9 @@ - ~_timer_queue(void) {} - - void release(const _Tp& value) { -- c.erase(std::remove(c.begin(), c.end(), value), c.end()); -+ this->c.erase(std::remove(this->c.begin(), this->c.end(), value), this->c.end()); - // after removing the item we need to make the heap again -- std::make_heap(c.begin(), c.end(), comp); -+ std::make_heap(this->c.begin(), this->c.end(), this->comp); - } - bool empty(void) const { return _Base::empty(); } - size_t size(void) const { return _Base::size(); } ---- blackbox-0.65.0.orig/src/Toolbar.cc -+++ blackbox-0.65.0/src/Toolbar.cc -@@ -62,6 +62,7 @@ - #include "Clientmenu.hh" - #include "Workspacemenu.hh" - #include "Slit.hh" -+#include "Xinerama.hh" - - - static long aMinuteFromNow(void) { -@@ -198,8 +199,56 @@ - - - void Toolbar::reconfigure(void) { -+ Rect rect = screen->getRect(); -+ -+ if (screen->getXineramaInfo() && screen->doXineramaToolbar()) { -+ -+ XineramaScreen xinerama = -+ screen->getXineramaInfo()->getScreen(screen->getXineramaToolbarScreen()); -+ -+ if (! xinerama.isValid()) { -+ -+ XineramaList list; -+ switch (screen->getToolbarPlacement()) { -+ case TopLeft: -+ case TopRight: -+ case TopCenter: -+ screen->getXineramaInfo()->getTopScreens(list); -+ break; -+ case BottomLeft: -+ case BottomRight: -+ case BottomCenter: -+ default: -+ screen->getXineramaInfo()->getBottomScreens(list); -+ break; -+ } -+ -+ switch (screen->getToolbarPlacement()) { -+ case TopLeft: -+ case BottomLeft: -+ xinerama = *list.begin(); -+ break; -+ case TopRight: -+ case BottomRight: -+ xinerama = *list.rbegin(); -+ break; -+ case TopCenter: -+ case BottomCenter: -+ default: { -+ XineramaList::iterator itr = list.begin(); -+ for (int count = list.size()/2; count--; ++itr); -+ xinerama = *itr; -+ break; -+ } -+ } -+ screen->saveXineramaToolbarScreen(xinerama.getScreenNumber()); -+ } // end if (invalid xinerama screen) -+ -+ rect = xinerama.getRect(); -+ } // end if (xinerama) -+ - unsigned int height = 0, -- width = (screen->getWidth() * screen->getToolbarWidthPercent()) / 100; -+ width = (rect.width() * screen->getToolbarWidthPercent()) / 100; - - if (i18n.multibyte()) - height = screen->getToolbarStyle()->fontset_extents->max_ink_extent.height; -@@ -218,18 +267,25 @@ - int x, y; - switch (screen->getToolbarPlacement()) { - case TopLeft: -+ case BottomLeft: -+ x = rect.left(); -+ break; - case TopRight: -- case TopCenter: -- if (screen->getToolbarPlacement() == TopLeft) -- x = 0; -- else if (screen->getToolbarPlacement() == TopRight) -- x = screen->getWidth() - frame.rect.width() -+ case BottomRight: -+ x = rect.left() + rect.width() - frame.rect.width() - - (screen->getBorderWidth() * 2); -- else -- x = (screen->getWidth() - frame.rect.width()) / 2; -- -- y = 0; -- -+ break; -+ case TopCenter: -+ case BottomCenter: -+ default: -+ x = rect.left() + (rect.width() - frame.rect.width()) / 2; -+ break; -+ } -+ switch (screen->getToolbarPlacement()) { -+ case TopLeft: -+ case TopRight: -+ case TopCenter: -+ y = rect.top(); - frame.x_hidden = x; - frame.y_hidden = screen->getBevelWidth() - screen->getBorderWidth() - - frame.rect.height(); -@@ -239,19 +295,11 @@ - case BottomRight: - case BottomCenter: - default: -- if (screen->getToolbarPlacement() == BottomLeft) -- x = 0; -- else if (screen->getToolbarPlacement() == BottomRight) -- x = screen->getWidth() - frame.rect.width() -- - (screen->getBorderWidth() * 2); -- else -- x = (screen->getWidth() - frame.rect.width()) / 2; -- -- y = screen->getHeight() - frame.rect.height() -+ y = rect.bottom() - frame.rect.height() - - (screen->getBorderWidth() * 2); - - frame.x_hidden = x; -- frame.y_hidden = screen->getHeight() - screen->getBevelWidth() -+ frame.y_hidden = rect.bottom() - screen->getBevelWidth() - - screen->getBorderWidth(); - break; - } -@@ -758,22 +806,9 @@ - if (toolbarmenu->isVisible()) { - toolbarmenu->hide(); - } else { -- int x, y; -- -- x = be->x_root - (toolbarmenu->getWidth() / 2); -- y = be->y_root - (toolbarmenu->getHeight() / 2); -- -- if (x < 0) -- x = 0; -- else if (x + toolbarmenu->getWidth() > screen->getWidth()) -- x = screen->getWidth() - toolbarmenu->getWidth(); -- -- if (y < 0) -- y = 0; -- else if (y + toolbarmenu->getHeight() > screen->getHeight()) -- y = screen->getHeight() - toolbarmenu->getHeight(); -- -- toolbarmenu->move(x, y); -+ toolbarmenu->moveInScreen(be->x_root, be->y_root, -+ -static_cast<signed>(toolbarmenu->getWidth()) / 2, -+ -static_cast<signed>(toolbarmenu->getHeight()) / 2); - toolbarmenu->show(); - } - } -@@ -1069,21 +1104,88 @@ - : Basemenu(tm->toolbar->screen) { - setLabel(i18n(ToolbarSet, ToolbarToolbarPlacement, "Toolbar Placement")); - setInternalMenu(); -- setMinimumSublevels(3); -+ reconfigure(); -+} - -- insert(i18n(CommonSet, CommonPlacementTopLeft, "Top Left"), -- Toolbar::TopLeft); -- insert(i18n(CommonSet, CommonPlacementBottomLeft, "Bottom Left"), -- Toolbar::BottomLeft); -- insert(i18n(CommonSet, CommonPlacementTopCenter, "Top Center"), -- Toolbar::TopCenter); -- insert(i18n(CommonSet, CommonPlacementBottomCenter, "Bottom Center"), -- Toolbar::BottomCenter); -- insert(i18n(CommonSet, CommonPlacementTopRight, "Top Right"), -- Toolbar::TopRight); -- insert(i18n(CommonSet, CommonPlacementBottomRight, "Bottom Right"), -- Toolbar::BottomRight); -+void Toolbarmenu::Placementmenu::reconfigure(void) -+{ -+ for (int count = getCount(); count > 0; count = remove(count-1)); -+ -+ if (getScreen()->getXineramaInfo() && getScreen()->doXineramaToolbar()) { -+ char buffer[256]; -+ XineramaList top_list, bottom_list; -+ getScreen()->getXineramaInfo()->getTopScreens(top_list); -+ getScreen()->getXineramaInfo()->getBottomScreens(bottom_list); -+ int width = std::max(top_list.size(),bottom_list.size()) + 2; -+ setMinimumSublevels(width); -+ -+ XineramaList::const_iterator top = top_list.begin(); -+ XineramaList::const_iterator bottom = bottom_list.begin(); -+ -+ insert(i18n(CommonSet, CommonPlacementTopLeft, "Top Left"), -+ handleFromPlacement(Toolbar::TopLeft, top->getScreenNumber())); -+ insert(i18n(CommonSet, CommonPlacementBottomLeft, "Bottom Left"), -+ handleFromPlacement(Toolbar::BottomLeft, bottom->getScreenNumber())); -+ -+ for (int count = width - 2; count--; ) { -+ if (top != top_list.end()) { -+ sprintf(buffer, -+ i18n(ToolbarSet, ToolbarScreenTop, "Screen %d Top"), -+ top->getScreenNumber()); -+ insert(buffer, -+ handleFromPlacement(Toolbar::TopCenter,top->getScreenNumber())); -+ ++top; -+ } -+ else { -+ insert("",-2); -+ } -+ -+ if (bottom != bottom_list.end()) { -+ sprintf(buffer, -+ i18n(ToolbarSet, ToolbarScreenBottom, "Screen %d Bottom"), -+ bottom->getScreenNumber()); -+ insert(buffer, -+ handleFromPlacement(Toolbar::BottomCenter,bottom->getScreenNumber())); -+ ++bottom; -+ } -+ else { -+ insert("",-2); -+ } -+ } -+ -+ int last_scr = top_list.rbegin()->getScreenNumber(); -+ insert(i18n(CommonSet, CommonPlacementTopRight, "Top Right"), -+ handleFromPlacement(Toolbar::TopRight, last_scr)); -+ last_scr = bottom_list.rbegin()->getScreenNumber(); -+ insert(i18n(CommonSet, CommonPlacementBottomRight, "Bottom Right"), -+ handleFromPlacement(Toolbar::BottomRight, last_scr)); -+ -+ update(); -+ -+ for (int index = 0; index < static_cast<signed>(getCount()); index++) { -+ if (find(index)->function() == -2) { -+ setItemEnabled(index, false); -+ } -+ } -+ } -+ else { -+ setMinimumSublevels(3); -+ -+ insert(i18n(CommonSet, CommonPlacementTopLeft, "Top Left"), -+ Toolbar::TopLeft); -+ insert(i18n(CommonSet, CommonPlacementBottomLeft, "Bottom Left"), -+ Toolbar::BottomLeft); -+ insert(i18n(CommonSet, CommonPlacementTopCenter, "Top Center"), -+ Toolbar::TopCenter); -+ insert(i18n(CommonSet, CommonPlacementBottomCenter, "Bottom Center"), -+ Toolbar::BottomCenter); -+ insert(i18n(CommonSet, CommonPlacementTopRight, "Top Right"), -+ Toolbar::TopRight); -+ insert(i18n(CommonSet, CommonPlacementBottomRight, "Bottom Right"), -+ Toolbar::BottomRight); -+ } - update(); -+ Basemenu::reconfigure(); - } - - -@@ -1094,7 +1196,14 @@ - BasemenuItem *item = find(index); - if (! item) return; - -- getScreen()->saveToolbarPlacement(item->function()); -+ int placement = Placementmenu::placementFromHandle(item->function()); -+ getScreen()->saveToolbarPlacement(placement); -+ -+ if (getScreen()->getXineramaInfo() && getScreen()->doXineramaToolbar()) { -+ int xinerama = Placementmenu::xineramaFromHandle(item->function()); -+ getScreen()->saveXineramaToolbarScreen(xinerama); -+ } -+ - hide(); - getScreen()->getToolbar()->reconfigure(); - ---- blackbox-0.65.0.orig/src/Toolbar.hh -+++ blackbox-0.65.0/src/Toolbar.hh -@@ -47,6 +47,15 @@ - - public: - Placementmenu(Toolbarmenu *tm); -+ -+ inline static int handleFromPlacement(int placement, int xinerama_screen) -+ { return ((xinerama_screen+1) << 3) | placement; } -+ inline static int placementFromHandle(int handle) -+ { return handle & 0x7; } -+ inline static int xineramaFromHandle(int handle) -+ { return (handle >> 3)-1; } -+ -+ void reconfigure(void); - }; - - Toolbar *toolbar; ---- blackbox-0.65.0.orig/src/Util.hh -+++ blackbox-0.65.0/src/Util.hh -@@ -29,6 +29,14 @@ - - #include <string> - -+struct Point { -+ inline Point(void) : x(0), y(0) {} -+ inline Point(int set_x, int set_y) : x(set_x), y(set_y) {} -+ inline void set(int set_x, int set_y) -+ { x = set_x; y = set_y; } -+ int x, y; -+}; -+ - class Rect { - public: - inline Rect(void) : _x1(0), _y1(0), _x2(0), _y2(0) { } -@@ -51,6 +59,7 @@ - - inline unsigned int width(void) const { return _x2 - _x1 + 1; } - inline unsigned int height(void) const { return _y2 - _y1 + 1; } -+ inline int area(void) const { return width() * height(); } - void setWidth(unsigned int __w); - void setHeight(unsigned int __h); - void setSize(unsigned int __w, unsigned int __h); -@@ -71,6 +80,9 @@ - inline bool valid(void) const { return _x2 > _x1 && _y2 > _y1; } - - bool intersects(const Rect &a) const; -+ -+ inline bool contains( int x, int y ) const -+ { return (x >= _x1) && (x <= _x2) && (y >= _y1) && (y <= _y2); } - - private: - int _x1, _y1, _x2, _y2; ---- blackbox-0.65.0.orig/src/Window.cc -+++ blackbox-0.65.0/src/Window.cc -@@ -44,6 +44,8 @@ - #endif // HAVE_STDLIB_H - } - -+#include <cassert> -+ - #include "i18n.hh" - #include "blackbox.hh" - #include "GCCache.hh" -@@ -55,6 +57,7 @@ - #include "Window.hh" - #include "Windowmenu.hh" - #include "Workspace.hh" -+#include "Xinerama.hh" - - - /* -@@ -208,8 +211,16 @@ - client.normal_hint_flags & (PPosition|USPosition)) { - applyGravity(frame.rect); - -- if (blackbox->isStartup() || client.rect.intersects(screen->getRect())) -+ if (blackbox->isStartup()) { -+ place_window = False; -+ } -+ else if (s->getXineramaInfo() && s->doXineramaPlacement()) { -+ if (s->getXineramaInfo()->screenContaining(client.rect).isValid()) -+ place_window = False; -+ } -+ else if (client.rect.intersects(screen->getRect())) { - place_window = False; -+ } - } - - /* -@@ -1626,7 +1637,13 @@ - blackbox_attrib.premax_h = - client.rect.height() + frame.margin.top + frame.margin.bottom; - -- const Rect &screen_area = screen->availableArea(); -+ Rect screen_area = screen->availableArea(); -+ if (screen->getXineramaInfo() && screen->doXineramaMaximize()) { -+ XineramaScreen xinerama -+ = screen->getXineramaInfo()->screenContaining(frame.rect); -+ if (xinerama.isValid()) -+ screen_area &= xinerama.getRect(); -+ } - frame.changing = screen_area; - - switch(button) { -@@ -3288,6 +3305,7 @@ - do { - if (multibyte) { - XRectangle ink, logical; -+ if (text_len>100) text_len=100; - XmbTextExtents(fontset, text, text_len, &ink, &logical); - length = logical.width; - } else { ---- blackbox-0.65.0.orig/src/Workspace.cc -+++ blackbox-0.65.0/src/Workspace.cc -@@ -55,13 +55,12 @@ - #include "Window.hh" - #include "Workspace.hh" - #include "Windowmenu.hh" -+#include "Xinerama.hh" - - - Workspace::Workspace(BScreen *scrn, unsigned int i) { - screen = scrn; - -- cascade_x = cascade_y = 32; -- - id = i; - - clientmenu = new Clientmenu(this); -@@ -123,9 +122,6 @@ - for (; it != end; ++it, ++i) - (*it)->setWindowNumber(i); - -- if (i == 0) -- cascade_x = cascade_y = 32; -- - return i; - } - -@@ -548,8 +544,19 @@ - - bool Workspace::smartPlacement(Rect& win, const Rect& availableArea) { - rectList spaces; -- spaces.push_back(availableArea); //initially the entire screen is free - -+ // If xinerama info, initialize spaces to available xinerama screens -+ if (screen->getXineramaInfo() && screen->doXineramaPlacement()) { -+ const XineramaList& list = screen->getXineramaInfo()->getScreens(); -+ for (XineramaList::const_iterator itr = list.begin(); -+ itr != list.end(); ++itr) { -+ spaces.push_back(availableArea & itr->getRect()); -+ } -+ } -+ else { -+ spaces.push_back(availableArea); //initially the entire screen is free -+ } -+ - //Find Free Spaces - BlackboxWindowList::const_iterator wit = windowList.begin(), - end = windowList.end(); -@@ -621,17 +628,45 @@ - } - - --bool Workspace::cascadePlacement(Rect &win, const Rect &availableArea) { -- if (cascade_x > (availableArea.width() / 2) || -- cascade_y > (availableArea.height() / 2)) -- cascade_x = cascade_y = 32; -- -- if (cascade_x == 32) { -- cascade_x += availableArea.x(); -- cascade_y += availableArea.y(); -- } -- -- win.setPos(cascade_x, cascade_y); -+bool Workspace::cascadePlacement(Rect &win, Rect availableArea, int offset) { -+ -+ // Place window in whichever xinerama screen contains the -+ // pointer. -+ int xinerama_screen = 0; -+ if (screen->getXineramaInfo() && screen->doXineramaPlacement()) { -+ int ptr_x, ptr_y, x, y; -+ Window c, r; -+ unsigned int m; -+ XQueryPointer(screen->getBaseDisplay()->getXDisplay(), -+ screen->getRootWindow(), -+ &r, &c, &ptr_x, &ptr_y, &x, &y, &m); -+ XineramaScreen xinerama = -+ screen->getXineramaInfo()->screenContaining(ptr_x, ptr_y); -+ if (! xinerama.isValid()) -+ xinerama = *(screen->getXineramaInfo()->getScreens().begin()); -+ xinerama_screen = xinerama.getScreenNumber(); -+ availableArea &= xinerama.getRect(); -+ } -+ -+ if (cascade_points.count(xinerama_screen) == 0) { -+ cascade_points[xinerama_screen] = Point(32,32); -+ } -+ Point& pos = cascade_points[xinerama_screen]; -+ -+ if (pos.x < (availableArea.left() + 32) || -+ pos.y < (availableArea.top() + 32) || -+ pos.x > (availableArea.left() + (int)availableArea.width() / 2) || -+ pos.y > (availableArea.top() + (int)availableArea.height() / 2)) -+ pos.x = pos.y = 32; -+ -+ if (pos.x == 32) { -+ pos.x += availableArea.x(); -+ pos.y += availableArea.y(); -+ } -+ -+ win.setPos(pos.x, pos.y); -+ pos.x += offset; -+ pos.y += offset; - - return True; - } -@@ -653,9 +688,8 @@ - } // switch - - if (placed == False) { -- cascadePlacement(new_win, availableArea); -- cascade_x += win->getTitleHeight() + (screen->getBorderWidth() * 2); -- cascade_y += win->getTitleHeight() + (screen->getBorderWidth() * 2); -+ cascadePlacement(new_win, availableArea, -+ win->getTitleHeight() + (screen->getBorderWidth() * 2)); - } - - if (new_win.right() > availableArea.right()) ---- blackbox-0.65.0.orig/src/Workspace.hh -+++ blackbox-0.65.0/src/Workspace.hh -@@ -51,7 +51,7 @@ - - std::string name; - unsigned int id; -- unsigned int cascade_x, cascade_y; -+ std::map<int,Point> cascade_points; - - Workspace(const Workspace&); - Workspace& operator=(const Workspace&); -@@ -62,7 +62,7 @@ - StackVector::iterator &stack); - - void placeWindow(BlackboxWindow *win); -- bool cascadePlacement(Rect& win, const Rect& availableArea); -+ bool cascadePlacement(Rect& win, Rect availableArea, int offset); - bool smartPlacement(Rect& win, const Rect& availableArea); - - public: ---- blackbox-0.65.0.orig/src/blackbox.cc -+++ blackbox-0.65.0/src/blackbox.cc -@@ -1094,6 +1094,26 @@ - screen_number, placement); - XrmPutLineResource(&new_blackboxrc, rc_string); - -+ // write out xinerama settings -+ sprintf(rc_string, "session.screen%d.xineramaPlacement: %s", -+ screen_number, screen->doXineramaPlacement() ? "True" : "False"); -+ XrmPutLineResource(&new_blackboxrc, rc_string); -+ sprintf(rc_string, "session.screen%d.xineramaMaximize: %s", -+ screen_number, screen->doXineramaMaximize() ? "True" : "False"); -+ XrmPutLineResource(&new_blackboxrc, rc_string); -+ sprintf(rc_string, "session.screen%d.xineramaMenuPlacement: %s", -+ screen_number, screen->doXineramaMenus() ? "True" : "False"); -+ XrmPutLineResource(&new_blackboxrc, rc_string); -+ sprintf(rc_string, "session.screen%d.slit.xineramaPlacement: %s", -+ screen_number, screen->doXineramaSlit() ? "True" : "False"); -+ XrmPutLineResource(&new_blackboxrc, rc_string); -+ sprintf(rc_string, "session.screen%d.toolbar.xineramaPlacement: %s", -+ screen_number, screen->doXineramaToolbar() ? "True" : "False"); -+ XrmPutLineResource(&new_blackboxrc, rc_string); -+ sprintf(rc_string, "session.screen%d.toolbar.xineramaScreen: %d", -+ screen_number, screen->getXineramaToolbarScreen()); -+ XrmPutLineResource(&new_blackboxrc, rc_string); -+ - load_rc(screen); - - // these are static, but may not be saved in the users .blackboxrc, -@@ -1215,7 +1235,6 @@ - } - } - -- - void Blackbox::load_rc(BScreen *screen) { - XrmDatabase database = (XrmDatabase) 0; - -@@ -1492,6 +1511,50 @@ - ! strncasecmp("true", value.addr, value.size)) { - screen->saveOpaqueMove(True); - } -+ -+ // load xinerama settings -+ sprintf(name_lookup, "session.screen%d.xineramaPlacement", screen_number); -+ sprintf(class_lookup, "Session.Screen%d.XineramaPlacement", screen_number); -+ screen->saveXineramaPlacement(true); -+ if ((XrmGetResource(database,name_lookup,class_lookup,&value_type,&value)) -+ && ! strncasecmp("false", value.addr, value.size)) { -+ screen->saveXineramaPlacement(false); -+ } -+ sprintf(name_lookup, "session.screen%d.xineramaMaximize", screen_number); -+ sprintf(class_lookup, "Session.Screen%d.XineramaMaximize", screen_number); -+ screen->saveXineramaMaximize(true); -+ if ((XrmGetResource(database,name_lookup,class_lookup,&value_type,&value)) -+ && ! strncasecmp("false", value.addr, value.size)) { -+ screen->saveXineramaMaximize(false); -+ } -+ sprintf(name_lookup, "session.screen%d.xineramaMenuPlacement", screen_number); -+ sprintf(class_lookup, "Session.Screen%d.XineramaMenuPlacement", screen_number); -+ screen->saveXineramaMenus(true); -+ if ((XrmGetResource(database,name_lookup,class_lookup,&value_type,&value)) -+ && ! strncasecmp("false", value.addr, value.size)) { -+ screen->saveXineramaMenus(false); -+ } -+ sprintf(name_lookup, "session.screen%d.slit.xineramaPlacement", screen_number); -+ sprintf(class_lookup, "Session.Screen%d.Slit.XineramaPlacement", screen_number); -+ screen->saveXineramaSlit(true); -+ if ((XrmGetResource(database,name_lookup,class_lookup,&value_type,&value)) -+ && ! strncasecmp("false", value.addr, value.size)) { -+ screen->saveXineramaSlit(false); -+ } -+ sprintf(name_lookup, "session.screen%d.toolbar.xineramaPlacement", screen_number); -+ sprintf(class_lookup, "Session.Screen%d.Toolbar.XineramaPlacement", screen_number); -+ screen->saveXineramaToolbar(true); -+ if ((XrmGetResource(database,name_lookup,class_lookup,&value_type,&value)) -+ && ! strncasecmp("false", value.addr, value.size)) { -+ screen->saveXineramaToolbar(false); -+ } -+ sprintf(name_lookup, "session.screen%d.toolbar.xineramaScreen", screen_number); -+ sprintf(class_lookup, "Session.Screen%d.Toolbar.XineramaScreen", screen_number); -+ screen->saveXineramaToolbarScreen(-1); -+ if ((XrmGetResource(database,name_lookup,class_lookup,&value_type,&value)) -+ && sscanf(value.addr, "%d", &int_value) == 1) { -+ screen->saveXineramaToolbarScreen(int_value); -+ } - - XrmDestroyDatabase(database); - } ---- blackbox-0.65.0.orig/src/Xinerama.cc -+++ blackbox-0.65.0/src/Xinerama.cc -@@ -0,0 +1,153 @@ -+// -*- mode: C++; indent-tabs-mode: nil; c-basic-offset: 2; -*- -+// Xinerama.cc for Blackbox - an X11 Window manager -+// Copyright (c) 2002 Jason Kraftcheck <kraftche@cae.wisc.edu> -+// -+// Permission is hereby granted, free of charge, to any person obtaining a -+// copy of this software and associated documentation files (the "Software"), -+// to deal in the Software without restriction, including without limitation -+// the rights to use, copy, modify, merge, publish, distribute, sublicense, -+// and/or sell copies of the Software, and to permit persons to whom the -+// Software is furnished to do so, subject to the following conditions: -+// -+// The above copyright notice and this permission notice shall be included in -+// all copies or substantial portions of the Software. -+// -+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -+// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -+// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -+// THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -+// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+// FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER -+// DEALINGS IN THE SOFTWARE. -+ -+ -+extern "C" { -+#include <X11/Xlib.h> -+#ifdef XINERAMA -+# include <X11/extensions/Xinerama.h> -+#endif -+} -+ -+#include "Xinerama.hh" -+#include "BaseDisplay.hh" -+ -+bool XineramaInfo::update(void) -+{ -+ screen_list.clear(); -+ -+#ifdef XINERAMA -+ int count; -+ XineramaScreenInfo* xinerama_list = XineramaQueryScreens( -+ screen_info->getBaseDisplay()->getXDisplay(), &count ); -+ if (xinerama_list) { -+ if (count > 1) { -+ for( int i = 0; i < count; i++ ) { -+ const XineramaScreenInfo& scr = xinerama_list[i]; -+ screen_list.push_back( XineramaScreen( scr.screen_number, -+ Rect( scr.x_org, scr.y_org, scr.width, scr.height ) ) ); -+ } -+ } -+ XFree(xinerama_list); -+ } -+#endif -+ -+ return haveXinerama(); -+} -+ -+XineramaScreen XineramaInfo::screenContaining( int x, int y ) const -+{ -+ XineramaList::const_iterator itr = getScreens().begin(), -+ end = getScreens().end(); -+ -+ for ( ; itr != end; ++itr) { -+ if (itr->getRect().contains(x,y)) -+ return *itr; -+ }; -+ -+ return XineramaScreen(); -+} -+ -+XineramaScreen XineramaInfo::screenContaining( const Rect& rect ) const -+{ -+ XineramaScreen result; -+ int area = 0; -+ XineramaList::const_iterator itr = getScreens().begin(), -+ end = getScreens().end(); -+ for ( ; itr != end; ++itr) { -+ if (itr->getRect().intersects(rect)) { -+ int a = (itr->getRect() & rect).area(); -+ if (a > area) { -+ result = *itr; -+ area = a; -+ } -+ } -+ } -+ return result; -+} -+ -+ -+XineramaScreen XineramaInfo::getScreen( int x_screen_number ) const -+{ -+ XineramaList::const_iterator itr = getScreens().begin(), -+ end = getScreens().end(); -+ for ( ; itr != end; ++itr) { -+ if (itr->getScreenNumber() == x_screen_number) -+ return *itr; -+ } -+ -+ return XineramaScreen(); -+} -+ -+ -+void XineramaInfo::getTopBottom( XineramaList& result, bool top ) const -+{ -+ for (XineramaList::const_iterator in_itr = screen_list.begin(); -+ in_itr != screen_list.end(); ++in_itr) { -+ -+ XineramaList::iterator out_itr = result.begin(); -+ while (out_itr != result.end() && -+ in_itr->getRect().left() >= out_itr->getRect().right()) -+ ++out_itr; -+ -+ if (out_itr == result.end()) { -+ result.push_back(*in_itr); -+ } -+ else if (in_itr->getRect().right() <= out_itr->getRect().left()) { -+ result.insert(out_itr,*in_itr); -+ } -+ else if ((!top && in_itr->getRect().bottom() > out_itr->getRect().bottom()) || -+ ( top && in_itr->getRect().top() < out_itr->getRect().top())) { -+ *out_itr = *in_itr; -+ } -+ } -+} -+ -+XineramaScreen XineramaInfo::getClosestScreen( int x, int y ) const -+{ -+ if (getScreens().empty()) -+ return XineramaScreen(); -+ -+ XineramaList::const_iterator itr = screen_list.begin(); -+ XineramaScreen result(*itr); -+ unsigned long dist_sqr = distanceSquared(itr->getRect(),x,y); -+ ++itr; -+ -+ for ( ; itr != screen_list.end(); ++itr) { -+ unsigned long ds = distanceSquared(itr->getRect(), x, y); -+ if (ds < dist_sqr) { -+ dist_sqr = ds; -+ result = *itr; -+ } -+ } -+ -+ return result; -+} -+ -+unsigned long XineramaInfo::distanceSquared(const Rect& rect,int x,int y) -+{ -+ unsigned long x_dist = (x < rect.left() ) ? rect.left() - x : -+ (x > rect.right() ) ? x - rect.right() : 0; -+ unsigned long y_dist = (y < rect.top() ) ? rect.top() - y : -+ (y > rect.bottom()) ? y - rect.bottom() : 0; -+ return x_dist * x_dist + y_dist * y_dist; -+} ---- blackbox-0.65.0.orig/src/Xinerama.hh -+++ blackbox-0.65.0/src/Xinerama.hh -@@ -0,0 +1,93 @@ -+// -*- mode: C++; indent-tabs-mode: nil; c-basic-offset: 2; -*- -+// Xinerama.hh for Blackbox - an X11 Window manager -+// Copyright (c) 2002 Jason Kraftcheck <kraftche@cae.wisc.edu> -+// -+// Permission is hereby granted, free of charge, to any person obtaining a -+// copy of this software and associated documentation files (the "Software"), -+// to deal in the Software without restriction, including without limitation -+// the rights to use, copy, modify, merge, publish, distribute, sublicense, -+// and/or sell copies of the Software, and to permit persons to whom the -+// Software is furnished to do so, subject to the following conditions: -+// -+// The above copyright notice and this permission notice shall be included in -+// all copies or substantial portions of the Software. -+// -+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -+// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -+// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -+// THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -+// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+// FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER -+// DEALINGS IN THE SOFTWARE. -+ -+#ifndef __Xinerama_hh -+#define __Xinerama_hh -+ -+#include <list> -+ -+#include "Util.hh" -+ -+class XineramaScreen; -+class ScreenInfo; -+ -+typedef std::list<XineramaScreen> XineramaList; -+ -+class XineramaScreen { -+private: -+ int x_screen; -+ Rect rect; -+ -+public: -+ inline XineramaScreen( int screen_number, const Rect& box ) -+ : x_screen(screen_number), rect(box) { } -+ -+ inline XineramaScreen(void) -+ : x_screen(-1) { } -+ -+ inline const Rect& getRect(void) const { return rect; } -+ inline int getScreenNumber(void) const { return x_screen; } -+ -+ inline bool operator==( const XineramaScreen& other ) const -+ { return x_screen == other.x_screen; } -+ -+ inline bool operator!=( const XineramaScreen& other ) const -+ { return x_screen != other.x_screen; } -+ -+ inline bool isValid(void) const { return x_screen >= 0; } -+}; -+ -+class XineramaInfo { -+private: -+ XineramaList screen_list; -+ ScreenInfo* screen_info; -+ -+protected: -+ void getTopBottom( XineramaList& result_list, bool top ) const; -+ -+ static unsigned long distanceSquared( const Rect& rect, int x, int y ); -+ -+public: -+ inline XineramaInfo( ScreenInfo* screen ) : screen_info(screen) -+ { update(); } -+ -+ inline bool haveXinerama(void) const -+ { return !screen_list.empty(); } -+ -+ inline const XineramaList& getScreens(void) const -+ { return screen_list; } -+ -+ bool update(void); -+ -+ XineramaScreen screenContaining( int x, int y ) const; -+ XineramaScreen screenContaining( const Rect& rect ) const; -+ XineramaScreen getScreen( int x_screen_number ) const; -+ XineramaScreen getClosestScreen( int x, int y ) const; -+ -+ inline void getTopScreens( XineramaList& result_list ) const -+ { getTopBottom( result_list, true ); } -+ -+ inline void getBottomScreens( XineramaList& result_list ) const -+ { getTopBottom( result_list, false ); } -+}; -+ -+#endif ---- blackbox-0.65.0.orig/util/Makefile.in -+++ blackbox-0.65.0/util/Makefile.in -@@ -79,7 +79,7 @@ - bin_PROGRAMS = bsetroot - - bsetroot_SOURCES = bsetroot.cc --bsetroot_LDADD = ../src/BaseDisplay.o ../src/Color.o ../src/GCCache.o ../src/Texture.o ../src/Timer.o ../src/Image.o ../src/ImageControl.o ../src/i18n.o ../src/Util.o -+bsetroot_LDADD = ../src/BaseDisplay.o ../src/Color.o ../src/GCCache.o ../src/Texture.o ../src/Timer.o ../src/Image.o ../src/ImageControl.o ../src/i18n.o ../src/Util.o ../src/Xinerama.o - - MAINTAINERCLEANFILES = Makefile.in - mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ---- blackbox-0.65.0.orig/debian/changelog -+++ blackbox-0.65.0/debian/changelog -@@ -0,0 +1,188 @@ -+blackbox (0.65.0-5) unstable; urgency=high -+ -+ * Fixed FTBFS with the missing build dependency on autoconf. -+ (closes: #291133) -+ -+ -- Bruno Barrera C. <bruno@debian.org> Tue, 18 Jan 2005 20:22:45 -0300 -+ -+blackbox (0.65.0-4) unstable; urgency=low -+ -+ * Fixed the string length problem. (closes: #178001) -+ * Added Xinerama support. (closes: #277517) -+ -+ -- Bruno Barrera C. <bruno@debian.org> Mon, 17 Jan 2005 23:27:56 -0300 -+ -+blackbox (0.65.0-3) unstable; urgency=low -+ -+ * Fixed FTBFS with gcc-3.4 (closes: #266642) -+ * debian/postinst now checks for the correct files to be removed -+ (blackbox-menu instead Blackbox-menu) -+ -+ -- Bruno Barrera C. <bruno.barrera@igloo.cl> Fri, 20 Aug 2004 21:44:55 -0400 -+ -+blackbox (0.65.0-2) unstable; urgency=low -+ -+ * New Maintainer (closes: #259585) -+ * Corrected menu-method coding (closes: #251237) -+ * Added a blackbox.desktop file. (closes: #257423) -+ * Completed the debian/copyright file. -+ -+ -- Bruno Barrera C. <bruno.barrera@igloo.cl> Fri, 16 Jul 2004 18:26:04 -0400 -+ -+blackbox (0.65.0-1.2) unstable; urgency=low -+ -+ * Non Maintainer Upload -+ * Patch by Matt Kraai to solve FTBFS: Closes: #208814. -+ -+ -- Jesus Climent <jesus.climent@hispalinux.es> Wed, 15 Oct 2003 15:38:53 +0300 -+ -+blackbox (0.65.0-1.1) unstable; urgency=low -+ -+ * Non Maintainer Upload -+ * Include <cassert> in src/Window.cc (Closes: #196245) -+ -+ -- David Pashley <david@davidpashley.com> Tue, 15 Jul 2003 16:36:04 +0200 -+ -+blackbox (0.65.0-1) unstable; urgency=low -+ -+ * new upstream release -+ * now has man pages for all binaries, closes: #93427 -+ * newer version of bsetbg behaves much better, closes: #109606 -+ * tilde expansion in blackboxrc and menus is now supported, closes: #139330 -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Wed, 18 Sep 2002 11:02:00 -0700 -+ -+blackbox (0.65.0-0.pre1) unstable; urgency=low -+ -+ * temporary deb -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Fri, 6 Sep 2002 19:33:37 -0700 -+ -+blackbox (0.62.1-1) unstable; urgency=low -+ -+ * new upstream release -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Wed, 30 Jan 2002 22:17:06 -0800 -+ -+blackbox (0.62.0-1) unstable; urgency=low -+ -+ * new upstream -+ * I am now the upstream (-: -+ * upstream fixes these, Closes: #72254, #103909, #116767 -+ * Documented update-menu and blackbox behaviour (closes: #117386) -+ * Added README.menu and .style (closes: #81008) -+ * removed empty dir (closes: #78777) -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Sat, 19 Jan 2002 11:22:06 -0800 -+ -+blackbox (0.61.1-1.1) unstable; urgency=low -+ -+ * NMU -+ * Fix unsafe temp files in bsetbg. Closes: #102126 -+ * Add class key as needed, printf is a macro as of gcc 3.0. Closes: #105452 -+ -+ -- LaMont Jones <lamont@smallone.fc.hp.com> Sun, 15 Jul 2001 23:29:46 -0600 -+ -+blackbox (0.61.1-1) unstable; urgency=low -+ -+ * New upstream release -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Mon, 9 Oct 2000 10:10:31 -0700 -+ -+blackbox (0.61.0-3) unstable; urgency=low -+ -+ * Changed menu-method to call x-terminal-emulator instead of xterm -+ * Closes: #71981 -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Wed, 20 Sep 2000 11:41:45 -0700 -+ -+blackbox (0.61.0-2) unstable; urgency=low -+ -+ * removed echo from the postinst -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Thu, 31 Aug 2000 11:35:39 -0700 -+ -+blackbox (0.61.0-1) unstable; urgency=low -+ -+ * New upstream -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Fri, 18 Aug 2000 13:29:31 -0700 -+ -+blackbox (0.61.0.20000806-1) unstable; urgency=low -+ -+ * New upstream -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Mon, 7 Aug 2000 10:19:22 -0700 -+ -+blackbox (0.61.0.20000726-2) unstable; urgency=low -+ -+ * Oops, forgot to re-run autofriends -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Wed, 26 Jul 2000 16:39:15 -0700 -+ -+blackbox (0.61.0.20000726-1) unstable; urgency=low -+ -+ * New upstream beta -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Wed, 26 Jul 2000 13:10:07 -0700 -+ -+blackbox (0.60.3-5) unstable; urgency=low -+ -+ * Fix for improper quoting of rootCommand -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Thu, 20 Jul 2000 21:41:11 -0700 -+ -+blackbox (0.60.3-4) unstable; urgency=low -+ -+ * Bug fix release -+ * added a CXXFLAGS setting to the rules file. This makes blackbox smaller -+ and faster. -+ * Closes: #45298, #55305, #61552, #64615, #64773, #64851, #64969 -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Tue, 18 Jul 2000 13:01:43 -0700 -+ -+blackbox (0.60.3-3) unstable; urgency=low -+ -+ * Oops, left the stylesmenu file -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Sat, 27 May 2000 19:40:41 -0700 -+ -+blackbox (0.60.3-2) unstable; urgency=low -+ -+ * Oops, left a call to update-bbstyles -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Fri, 26 May 2000 16:12:27 -0700 -+ -+blackbox (0.60.3-1) unstable; urgency=low -+ -+ * New upstream release -+ * Changed user style menu to look in ~/.blackbox/styles to match -+ current practice among style authors -+ * Cleaned up menu-method script and thus the resulting menu file it -+ generates -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Fri, 26 May 2000 12:08:34 -0700 -+ -+blackbox (0.60.2-2) unstable; urgency=low -+ -+ * Removed update-styles -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Thu, 25 May 2000 14:02:15 -0700 -+ -+blackbox (0.60.2-1) unstable; urgency=low -+ -+ * New upstream release -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Thu, 25 May 2000 12:55:42 -0700 -+ -+blackbox (0.60.0.alpha-2) unstable; urgency=low -+ -+ * New maintainer -+ -+ -- Sean 'Shaleh' Perry <shaleh@debian.org> Thu, 25 May 2000 11:50:49 -0700 -+ -+blackbox (0.60.0.alpha-1) unstable; urgency=low -+ -+ * The Alpha release. -+ -+ -- Brent A. Fulgham <bfulgham@debian.org> Sat, 22 April 2000 13:32:08 -0800 ---- blackbox-0.65.0.orig/debian/conffiles -+++ blackbox-0.65.0/debian/conffiles -@@ -0,0 +1 @@ -+/etc/menu-methods/blackbox ---- blackbox-0.65.0.orig/debian/control -+++ blackbox-0.65.0/debian/control -@@ -0,0 +1,26 @@ -+Source: blackbox -+Section: x11 -+Priority: optional -+Build-Depends: autoconf, xlibs-dev, debhelper -+Maintainer: Bruno Barrera C. <bruno@debian.org> -+Standards-Version: 3.5.0 -+ -+Package: blackbox -+Architecture: any -+Depends: ${shlibs:Depends} -+Provides: x-window-manager -+Suggests: menu (>=1.5) -+Description: Window manager for X -+ This is a window manager for X. It is similar in many respects to -+ such popular packages as Window Maker, Enlightenment, and FVWM2. You -+ might be interested in this package if you are tired of window managers -+ that are a heavy drain on your system resources, but you still want -+ an attractive and modern-looking interface. -+ . -+ The best part of all is that this program is coded in C++, so it -+ is even more attractive "under the hood" than it is in service -- no -+ small feat. -+ . -+ If none of this sounds familiar to you, or you want your computer to -+ look like Microsoft Windows or Apple's OS X, you probably don't want -+ this package. ---- blackbox-0.65.0.orig/debian/copyright -+++ blackbox-0.65.0/debian/copyright -@@ -0,0 +1,37 @@ -+This package was debianized by Brent A. Fulgham bfulgham@debian.org on -+Thu, 15 Oct 1998 18:17:09 -0700. -+ -+It was downloaded from http://sf.net/projects/blackboxwm -+ -+Upstream Authors: Sean 'Shaleh' Perry <shaleh@debian.org> -+ Brad Hughes <bhughes@trolltech.com> -+ Jeff Raven <jraven@psu.edu> -+ -+Copyright: -+ -+The Regents of the University of California. -+All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions -+are met: -+1. Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+2. Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+3. Neither the name of the University nor the names of its contributors -+ may be used to endorse or promote products derived from this software -+ without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS `AS IS'' AND -+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+SUCH DAMAGE. ---- blackbox-0.65.0.orig/debian/dirs -+++ blackbox-0.65.0/debian/dirs -@@ -0,0 +1,10 @@ -+etc/menu-methods -+etc/X11/blackbox -+usr/bin -+usr/share/man/man1 -+usr/share/doc -+usr/share/doc/blackbox -+usr/share/blackbox -+usr/share/blackbox/styles -+usr/share/blackbox/nls -+usr/share/xsessions ---- blackbox-0.65.0.orig/debian/docs -+++ blackbox-0.65.0/debian/docs -@@ -0,0 +1 @@ -+AUTHORS README README.bsetbg data/README.menu data/README.style ---- blackbox-0.65.0.orig/debian/menu -+++ blackbox-0.65.0/debian/menu -@@ -0,0 +1,24 @@ -+?package(blackbox):needs="wm" \ -+ section="WindowManagers" title="Blackbox" \ -+ command="/usr/bin/blackbox" -+?package(blackbox):needs="blackbox" \ -+ section="WindowManagers" title="Exit" \ -+ command="exit" -+?package(blackbox):needs="blackbox" \ -+ section="WindowManagers" title="Reconfigure" \ -+ command="reconfig" -+?package(blackbox):needs="blackbox" \ -+ section="WindowManagers" title="Restart" \ -+ command="restart" -+?package(blackbox):needs="blackbox" \ -+ section="Blackbox/Styles" title="/usr/share/blackbox/styles" \ -+ command="stylesdir" -+?package(blackbox):needs="blackbox" \ -+ section="Blackbox/Styles" title="~/.blackbox/styles" \ -+ command="stylesdir" -+?package(blackbox):needs="blackbox" \ -+ section="Blackbox" title="Workspaces" \ -+ command="workspaces" -+?package(blackbox):needs="blackbox" \ -+ section="Blackbox" title="Configuration" \ -+ command="config" ---- blackbox-0.65.0.orig/debian/menu-method -+++ blackbox-0.65.0/debian/menu-method -@@ -0,0 +1,27 @@ -+#!/usr/sbin/install-menu -+# -+# Generates blackbox menus for all registered applications. -+ -+!include menu.h -+compat="menu-1" -+outputencoding="LOCALE" -+ -+genmenu="blackbox-menu" -+rootprefix="/etc/X11/blackbox/" -+userprefix=".blackbox/" -+treewalk="M)" -+ -+supported -+ x11= nstring(level(), " ") "[exec] (" esc(title(), "()") ") {" esc($command, "()") "}\n" -+ wm= nstring(level(), " ") "[restart] (" esc(title(), "()") ") {" esc($command, "()") "}\n" -+ text= nstring(level(), " ") "[exec] (" esc(title(), "()") ") {" esc(term(), "()") "}\n" -+blackbox= nstring(level(), " ") "[" esc($command, "()") "] (" esc(title(), "()") ")\n" -+endsupported -+ -+preoutput= \ -+ "# Automatically generated file. Do not edit (see /usr/share/doc/menu/README)\n\n[begin] (Debian)\n" -+ -+startmenu= "" -+submenutitle= nstring(level(), " ") "[submenu] (" esc(title(),"()") ") {" esc($longtitle,"()") "}\n" -+endmenu= nstring(level(), " ") "[end]\n" -+ ---- blackbox-0.65.0.orig/debian/postinst -+++ blackbox-0.65.0/debian/postinst -@@ -0,0 +1,49 @@ -+#!/bin/sh -+# -+# Blackbox postinst -+# -+# Shamelessly ripped off of Marcelo Magallon's script -+# by Brent Fulgham <bfulgham@debian.org> -+# -+set -e -+ -+WMentry="/usr/bin/blackbox" -+ -+add_wm_entry () -+{ -+ update-alternatives --install /usr/bin/x-window-manager x-window-manager $WMentry 50 \ -+ --slave /usr/share/man/man1/x-window-manager.1.gz x-window-manager.1.gz /usr/share/man/man1/blackbox.1.gz -+} -+ -+case "$1" in -+ configure) -+ if [ "$2" ] && dpkg --compare-versions $2 le 0.51.3-12; then -+ update-alternatives --remove x-window-manager /etc/X11/window-managers -+ fi -+ -+ add_wm_entry -+ -+ # clean up after eaarlier debs -+ if [ -f /usr/share/blackbox/styles/stylesmenu ]; then -+ rm /usr/share/blackbox/styles/stylesmenu -+ fi -+ -+ if [ -f /etc/X11/blackbox/blackbox-menu ]; then -+ rm /etc/X11/blackbox/blackbox-menu -+ fi -+ -+ if [ -x /usr/sbin/wm-menu-config ]; then -+ wm-menu-config blackbox on; -+ fi -+ ;; -+ -+ abort-upgrade|abort-deconfigure|abort-remove) -+ # how did we get here? Force a non-zero exit code -+ exit 1 -+ ;; -+ -+ *) -+ ;; -+esac -+ -+#DEBHELPER# ---- blackbox-0.65.0.orig/debian/postrm -+++ blackbox-0.65.0/debian/postrm -@@ -0,0 +1,24 @@ -+#!/bin/sh -+set -e -+ -+Blackbox_entry="/usr/bin/blackbox" -+ -+case "$1" in -+ purge) -+ rm -rf /etc/X11/blackbox -+ ;; -+ remove) -+ if [ -x /usr/sbin/wm-menu-config ]; then -+ wm-menu-config blackbox off -+ fi -+ -+ if [ -x /usr/sbin/register-window-manager ] ; then -+ register-window-manager --remove $Blackbox_entry -+ fi -+ -+ ;; -+ *) -+ ;; -+esac -+ -+#DEBHELPER# ---- blackbox-0.65.0.orig/debian/rules -+++ blackbox-0.65.0/debian/rules -@@ -0,0 +1,71 @@ -+#!/usr/bin/make -f -+# MAde with the aid of dh_make, by Craig Small -+# Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess. -+# Some lines taken from debmake, by Cristoph Lameter. -+ -+# Uncomment this to turn on verbose mode. -+#export DH_VERBOSE=1 -+ -+PACKAGE=blackbox -+ -+build: build-stamp -+build-stamp: -+ dh_testdir -+ autoconf -+ CXXFLAGS="-O2 -fno-rtti -fno-exceptions -fno-check-new" ./configure --prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc/X11/blackbox -+ -+ # Add here commands to compile the package. -+ $(MAKE) DEFAULT_MENU=/etc/X11/blackbox/blackbox-menu -+ -+ touch build-stamp -+ -+clean: -+ dh_testdir -+ dh_testroot -+ rm -f build-stamp install-stamp config.log -+ -+ # Add here commands to clean up after the build process. -+ -$(MAKE) distclean -+ -+ dh_clean -+ -+ -+install: install-stamp -+install-stamp: build-stamp -+ dh_testdir -+ dh_testroot -+ dh_clean -k -+ dh_installdirs -+ -+ # Add here commands to install the package into debian/tmp. -+ $(MAKE) install DESTDIR=`pwd`/debian/tmp -+ # make install places a menu here, but we don't want it -+ rm -f `pwd`/debian/tmp/usr/share/blackbox/menu -+ cp debian/blackbox.desktop `pwd`/debian/tmp/usr/share/xsessions/ -+ touch install-stamp -+ -+# Build architecture-independent files here. -+binary-indep: build install -+# We have nothing to do by default. -+ -+# Build architecture-dependent files here. -+binary-arch: build install -+ dh_testdir -+ dh_testroot -+ dh_installdocs -+ dh_installmenu -+ dh_installchangelogs ChangeLog -+ dh_strip -+ dh_compress -+ dh_fixperms -+ dh_installdeb -+ dh_shlibdeps -+ dh_gencontrol -+ dh_md5sums -+ dh_builddeb -+ -+source diff: -+ @echo >&2 'source and diff are obsolete - use dpkg-source -b'; false -+ -+binary: binary-indep binary-arch -+.PHONY: build clean binary-indep binary-arch binary ---- blackbox-0.65.0.orig/debian/prerm -+++ blackbox-0.65.0/debian/prerm -@@ -0,0 +1,13 @@ -+#!/bin/sh -+set -e -+ -+case "$1" in -+ remove) -+ update-alternatives --remove x-window-manager /usr/bin/blackbox -+ ;; -+ *) -+ ;; -+esac -+ -+#DEBHELPER# -+ ---- blackbox-0.65.0.orig/debian/README.debian -+++ blackbox-0.65.0/debian/README.debian -@@ -0,0 +1,9 @@ -+User menus: -+ -+When update-menus is run as a user it will create ~/.blackbox-menu. You then -+need to exit blackbox if it is running and edit ~/.blackboxrc. Change the -+line: -+ -+session.menuFile: /etc/X11/blackbox/blackbox-menu -+ -+to point to the new file. ---- blackbox-0.65.0.orig/debian/blackbox.desktop -+++ blackbox-0.65.0/debian/blackbox.desktop -@@ -0,0 +1,12 @@ -+[Desktop Entry] -+Encoding=UTF-8 -+Name=Blackbox -+Comment=Highly configurable and low resource X11 Window manager -+Exec=blackbox -+Terminal=False -+TryExec=blackbox -+Type=Application -+ -+[Window Manager] -+SessionManaged=true -+ diff --git a/source/xap/blackbox/xinitrc.blackbox b/source/xap/blackbox/xinitrc.blackbox index e5822118b..fbe0997be 100644 --- a/source/xap/blackbox/xinitrc.blackbox +++ b/source/xap/blackbox/xinitrc.blackbox @@ -3,8 +3,8 @@ userresources=$HOME/.Xresources usermodmap=$HOME/.Xmodmap -sysresources=/usr/lib/X11/xinit/.Xresources -sysmodmap=/usr/lib/X11/xinit/.Xmodmap +sysresources=/etc/X11/xinit/.Xresources +sysmodmap=/etc/X11/xinit/.Xmodmap # merge in defaults and keymaps diff --git a/source/xap/blueman/blueman-open b/source/xap/blueman/blueman-open new file mode 100644 index 000000000..0cfa688fa --- /dev/null +++ b/source/xap/blueman/blueman-open @@ -0,0 +1,114 @@ +#!/bin/sh +# Blueman Mount Script for Slackware +# by Zarren Spry & Robby Workman +# Based on http://kde-apps.org/content/show.php/kde4+bluetooth+files+open?content=108869 + +# Set to 0 if you want more debugging messages +DEBUG=1 + +device_addr="$1" +device_name="$(hcitool name $device_addr)" +own_name="$(basename $0)" +basedir="${basedir:-$HOME/obexfs}" +mountpoint="${basedir}/${device_addr}" +browser=${browser:-"xdg-open"} + +# If we're running in kde, use kdialog +if [ "$KDE_FULL_SESSION" = "true" ]; then + if which kdialog 1>/dev/null 2>/dev/null; then + messagetype="kdialog" + fi +# If not, then see if libnotify is available +# Even if it is, there may not be a notification daemon running, but there's +# no good way to check for this, so oh well... +elif which notify-send 1>/dev/null 2>/dev/null; then + messagetype="libnotify" +# If no libnotify, then use kdialog if it's installed +elif which kdialog 1>/dev/null 2>/dev/null; then + messagetype="kdialog" +# If all else fails, just don't do notifications +else + messagetype="" +fi + +# Mount function +mount_device () +{ + [ ! -z $DEBUG ] && logger -i -t $own_name "Attempting to mount device $device_name to $mountpoint..." + [ ! -z $DEBUG ] && logger -i -t $own_name "Execute: obexfs -b $device_addr $mountpoint" + + mkdir -p $mountpoint + obexfs -b $device_addr $mountpoint 2>&1 + + if [ $? != 0 ]; then + MSG_TXT="Failed to mount $device_name to $mountpoint. $dbg_msg" + FAILZOR=definitely + if [ ! -z $DEBUG ]; then + logger -i -t $own_name "Failed to mount $device_name to $mountpoint." + fi + else + MSG_TXT="Successfully mounted $device_name to $mountpoint" + if [ ! -z $DEBUG ]; then + logger -i -t $own_name "Successfully mounted $device_name to $mountpoint." + fi + fi + + if [ $messagetype == "kdialog" ]; then + kdialog --passivepopup "$MSG_TXT" 2 + elif [ $messagetype == "libnotify" ]; then + notify-send --expire-time=20000 --icon=blueman "$MSG_TXT" + fi + + [ "$FAILZOR" = "definitely" ] && exit 1 + + [ ! -z $DEBUG ] && logger -i -t $own_name "Opening $mountpoint with $browser..." + $browser $mountpoint 2>&1 + +} + +# Unmount function +umount_device () +{ + if grep -qw $mountpoint /proc/mounts 2>/dev/null ; then + [ ! -z $DEBUG ] && logger -i -t $own_name \ + "$mountpoint has something mounted on it already - unmounting it..." + + fusermount -u $mountpoint 1>/dev/null 2>/dev/null + + if [ $? != 0 ]; then + [ ! -z $DEBUG ] && logger -i -t $own_name "Failed to unmount $mountpoint with fusermount..." + umount -f $mountpoint 1>/dev/null 2>/dev/null + if [ $? != 0 ]; then + [ ! -z $DEBUG ] && \ + logger -i -t $own_name \ + "Failed to unmount $mountpoint with umount - try it manually as root and then start over." + FAILZOR=definitely + MSG_TXT="Failed to unmount $mountpoint with fusermount and umount - try it as root first." + else + break + fi + else + [ ! -z $DEBUG ] && logger -i -t $own_name "Successfully unmounted $device_name." + fi + else + [ ! -z $DEBUG ] && logger -i -t $own_name "$mountpoint has nothing mounted on it - continuing..." + fi + + if [ $messagetype == "kdialog" ]; then + kdialog --passivepopup "$MSG_TXT" 3 + elif [ $messagetype == "libnotify" ]; then + notify-send --expire-time=20000 --icon=blueman "$MSG_TXT" + fi + [ "$FAILZOR" = "definitely" ] && exit 1 +} + +MSG_TXT="Attempting to mount $device_name - please wait..." +if [ $messagetype == "kdialog" ]; then + kdialog --passivepopup "$MSG_TXT" 4 +elif [ $messagetype == "libnotify" ]; then + notify-send --expire-time=20000 --icon=blueman "$MSG_TXT" +fi + +umount_device +mount_device + diff --git a/source/xap/blueman/blueman-use_blueman-open_for_obexfs.diff b/source/xap/blueman/blueman-use_blueman-open_for_obexfs.diff new file mode 100644 index 000000000..542ee6e5d --- /dev/null +++ b/source/xap/blueman/blueman-use_blueman-open_for_obexfs.diff @@ -0,0 +1,12 @@ +diff -Nur blueman-1.21.orig/blueman/Constants.py.in blueman-1.21/blueman/Constants.py.in +--- blueman-1.21.orig/blueman/Constants.py.in 2009-09-20 05:01:26.000000000 -0500 ++++ blueman-1.21/blueman/Constants.py.in 2009-12-13 16:26:29.643850538 -0600 +@@ -10,7 +10,7 @@ + POLKIT = "@polkit_val@" == "yes" + HAL_ENABLED = "@hal_en@" == "yes" + +-DEF_BROWSE_COMMAND = "nautilus --browser obex://[%d]" ++DEF_BROWSE_COMMAND = "/usr/libexec/blueman-open %d" + + import os + import gettext diff --git a/source/xap/blueman/blueman.SlackBuild b/source/xap/blueman/blueman.SlackBuild new file mode 100755 index 000000000..bdb134e0f --- /dev/null +++ b/source/xap/blueman/blueman.SlackBuild @@ -0,0 +1,142 @@ +#!/bin/sh + +# Slackware build script for blueman + +# Copyright 2009 Robby Workman, Northport, Alabama, USA +# Copyright 2010 Patrick Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=blueman +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} +POLKIT_OPTION=" --disable-polkit " + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Address a couple of bugs that have been fixed in the bzr repo +zcat $CWD/no_hide_applet.diff.gz | patch -p0 --verbose || exit 1 +zcat $CWD/fix_on_off_loop.diff.gz | patch -p0 --verbose || exit 1 + +# Use blueman-open, a modified version of this, to browse obexfs shares: +# http://www.kde-apps.org/content/show.php/kde4+bluetooth+files+open?content=108869 +zcat $CWD/blueman-use_blueman-open_for_obexfs.diff.gz | patch -p1 || exit 1 + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --disable-static \ + --with-dhcp-config=/etc/dhcpd.conf \ + --enable-hal \ + $POLKIT_OPTION \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +if echo $POLKIT_OPTION | grep -q '\--disable-polkit' ; then + # Remove unneeded junk + rm -rf $PKG/usr/share/polkit-1 +fi + +# Add the blueman-open script to /usr/libexec for browsing obexfs shares +# I don't want to put this in PATH and have someone accidentally run it +mkdir -p $PKG/usr/libexec +cat $CWD/blueman-open > $PKG/usr/libexec/blueman-open +chmod 0755 $PKG/usr/libexec/blueman-open + +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null || true + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null || true +) + +( cd $PKG/usr/man + find . -type f -exec gzip -9 {} \; + for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done +) + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING* INSTALL NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -p -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/xap/blueman/doinst.sh b/source/xap/blueman/doinst.sh new file mode 100644 index 000000000..17b18ef35 --- /dev/null +++ b/source/xap/blueman/doinst.sh @@ -0,0 +1,23 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +if [ -x /usr/bin/update-desktop-database ]; then + /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1 +fi + +if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then + if [ -x /usr/bin/gtk-update-icon-cache ]; then + /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1 + fi +fi + diff --git a/source/xap/blueman/fix_on_off_loop.diff b/source/xap/blueman/fix_on_off_loop.diff new file mode 100644 index 000000000..ac11c1351 --- /dev/null +++ b/source/xap/blueman/fix_on_off_loop.diff @@ -0,0 +1,58 @@ +revno: 602 +committer: walmis +timestamp: Sun 2009-10-25 15:49:33 +0000 +message: + fix bluetooth on/off loop + +=== modified file 'blueman/plugins/applet/PowerManager.py' +--- blueman/plugins/applet/PowerManager.py 2009-10-25 15:16:14 +0000 ++++ blueman/plugins/applet/PowerManager.py 2009-10-25 15:49:33 +0000 +@@ -66,22 +66,6 @@ + dprint("adapter powered on while in off state, turning bluetooth on") + self.bluetooth_off = False + +- +- def on_manager_state_changed(self, state): +- if state: +- adapters = self.Applet.Manager.ListAdapters() +- for adapter in adapters: +- props = adapter.GetProperties() +- if not props["Powered"]: +- self.bluetooth_off = True +- if self.state_change_deferred != -1: +- break +- else: +- return +- +- if self.state_change_deferred != -1: +- self.bluetooth_off = self.state_change_deferred +- self.state_change_deferred = -1 + + def on_bluetooth_toggled(self): + self.bluetooth_off = not self.bluetooth_off +@@ -97,9 +81,17 @@ + + return pixbuf + ++ def process_deferred(self): ++ if self.state_change_deferred != -1: ++ dprint("Setting deferred status") ++ self.bluetooth_off = self.state_change_deferred ++ self.state_change_deferred = -1 ++ + def on_adapter_added(self, path): + adapter = Bluez.Adapter(path) + def on_ready(): ++ self.process_deferred() ++ + if self.bluetooth_off: + adapter.SetProperty("Powered", False) + else: +@@ -134,6 +126,7 @@ + self.__dict__[key] = value + + if not self.Applet.Manager: ++ dprint("deferring status change") + self.state_change_deferred = value + return + diff --git a/source/xap/blueman/no_hide_applet.diff b/source/xap/blueman/no_hide_applet.diff new file mode 100644 index 000000000..a57a2b8f9 --- /dev/null +++ b/source/xap/blueman/no_hide_applet.diff @@ -0,0 +1,30 @@ +revno: 647 +committer: Valmantas PalikÅ¡a <walmis@balticum-tv.lt> +branch nick: trunk +timestamp: Wed 2009-12-02 21:31:16 +0200 +message: + don't force hide the applet if bluez manager is not initialized + +=== modified file 'blueman/plugins/applet/StatusIcon.py' +--- blueman/plugins/applet/StatusIcon.py 2009-10-27 16:10:53 +0000 ++++ blueman/plugins/applet/StatusIcon.py 2009-12-02 19:31:16 +0000 +@@ -55,15 +55,16 @@ + self.Query() + + def Query(self): +- if not self.Applet.Manager: +- self.props.visible = False +- return + + rets = self.Applet.Plugins.Run("on_query_status_icon_visibility") + if not StatusIcon.FORCE_HIDE in rets: + if StatusIcon.FORCE_SHOW in rets: + self.props.visible = True + else: ++ if not self.Applet.Manager: ++ self.props.visible = False ++ return ++ + try: + if self.Applet.Manager.ListAdapters() == []: + self.props.visible = False diff --git a/source/xap/blueman/slack-desc b/source/xap/blueman/slack-desc new file mode 100644 index 000000000..d9b80088d --- /dev/null +++ b/source/xap/blueman/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +blueman: Blueman (Graphical Bluetooth Manager) +blueman: +blueman: Blueman is a GTK+ Bluetooth Manager for tasks such as: +blueman: +blueman: - Connecting to 3G/EDGE/GPRS via DUN profile. +blueman: - Connecting to/Creating bluetooth networks +blueman: - Connecting to input and audio devices +blueman: - Sending/Receiving/Browsing files via OBEX +blueman: - Pairing +blueman: +blueman: Homepage: http://blueman-project.org diff --git a/source/xap/electricsheep/electricsheep.SlackBuild b/source/xap/electricsheep/electricsheep.SlackBuild index 1ed540cdd..69ab99d02 100755 --- a/source/xap/electricsheep/electricsheep.SlackBuild +++ b/source/xap/electricsheep/electricsheep.SlackBuild @@ -34,8 +34,17 @@ PRGNAM=electricsheep VERSION=${VERSION:-20090306} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi # Where do we look for sources? SRCDIR=$(cd $(dirname $0); pwd) @@ -116,6 +125,9 @@ case "$ARCH" in armel) SLKCFLAGS="-O2 -march=armv4t" SLKLDFLAGS=""; LIBDIRSUFFIX="" ;; + *) SLKCFLAGS="-O2" + SLKLDFLAGS=""; LIBDIRSUFFIX="" + ;; esac # Create working directories: diff --git a/source/xap/fluxbox/fluxbox.SlackBuild b/source/xap/fluxbox/fluxbox.SlackBuild index bb0f03639..9685e3f6a 100755 --- a/source/xap/fluxbox/fluxbox.SlackBuild +++ b/source/xap/fluxbox/fluxbox.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,22 +22,38 @@ VERSION=1.1.1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-fluxbox + rm -rf $PKG mkdir -p $TMP $PKG diff --git a/source/xap/fluxbox/xinitrc.fluxbox b/source/xap/fluxbox/xinitrc.fluxbox index d04675a98..593875db4 100644 --- a/source/xap/fluxbox/xinitrc.fluxbox +++ b/source/xap/fluxbox/xinitrc.fluxbox @@ -3,8 +3,8 @@ userresources=$HOME/.Xresources usermodmap=$HOME/.Xmodmap -sysresources=/usr/lib/X11/xinit/.Xresources -sysmodmap=/usr/lib/X11/xinit/.Xmodmap +sysresources=/etc/X11/xinit/.Xresources +sysmodmap=/etc/X11/xinit/.Xmodmap # merge in defaults and keymaps diff --git a/source/xap/geeqie/doinst.sh b/source/xap/geeqie/doinst.sh new file mode 100644 index 000000000..c9177adda --- /dev/null +++ b/source/xap/geeqie/doinst.sh @@ -0,0 +1,7 @@ +if [ -x /usr/bin/update-desktop-database ]; then + /usr/bin/update-desktop-database usr/share/applications >/dev/null 2>&1 +fi +#if [ -x /usr/bin/gtk-update-icon-cache ]; then +# /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor > /dev/null 2>&1 +#fi + diff --git a/source/xap/gqview/gqview.SlackBuild b/source/xap/geeqie/geeqie.SlackBuild index 74e0a3a97..55b0b69d6 100755 --- a/source/xap/gqview/gqview.SlackBuild +++ b/source/xap/geeqie/geeqie.SlackBuild @@ -1,7 +1,6 @@ #!/bin/sh -# Copyright 2006 Robby Workman (http://rlworkman.net) -# Copyright 2007, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,11 +23,21 @@ # Modified by the SlackBuilds.org project -PRGNAM=gqview -VERSION=2.1.5 -ARCH=${ARCH:-x86_64} +PKGNAM=geeqie +VERSION=1.0 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -38,18 +47,20 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -66,18 +77,25 @@ CXXFLAGS="$SLKCFLAGS" \ --mandir=/usr/man \ --program-prefix="" \ --program-suffix="" \ - --build=i486-slackware-linux + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install-strip DESTDIR=$PKG || exit 1 -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a \ - AUTHORS COPYING ChangeLog INSTALL NEWS README TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION -cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild -mv $PKG/usr/share/doc/$PRGNAM-$VERSION/* $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +mv $PKG/usr/share/doc/$PKGNAM-$VERSION/* $PKG/usr/doc/$PKGNAM-$VERSION rm -r $PKG/usr/share/doc +cp -a \ + AUTHORS COPYING* INSTALL NEWS README* TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi # Compress and if needed symlink the man pages: if [ -d $PKG/usr/man ]; then @@ -99,5 +117,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/xap/gqview/slack-desc b/source/xap/geeqie/slack-desc index d6a6ceab4..cadbd7745 100644 --- a/source/xap/gqview/slack-desc +++ b/source/xap/geeqie/slack-desc @@ -6,14 +6,15 @@ # customary to leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -gqview: gqview (GQview Image Browser) -gqview: -gqview: GQview is an image browser that features single-click access to view -gqview: images and move around the directory tree. -gqview: -gqview: Homepage: http://gqview.sourceforge.net/ -gqview: -gqview: -gqview: -gqview: -gqview: +geeqie: geeqie (Geeqie image viewer) +geeqie: +geeqie: Geeqie is an interactive GTK based image viewer that supports multiple +geeqie: image formats, zooming, panning, thumbnails, and sorting images into +geeqie: collections. +geeqie: +geeqie: Homepage: http://geeqie.sourceforge.net +geeqie: +geeqie: +geeqie: +geeqie: +geeqie: diff --git a/source/xap/gimp/gimp.SlackBuild b/source/xap/gimp/gimp.SlackBuild index ef001a681..377f519ca 100755 --- a/source/xap/gimp/gimp.SlackBuild +++ b/source/xap/gimp/gimp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.6.6 -ARCH=${ARCH:-x86_64} +VERSION=2.6.8 BUILD=${BUILD:-2} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) @@ -46,8 +55,11 @@ fi cd $TMP rm -rf gimp-$VERSION -tar xvf $CWD/gimp-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/gimp-$VERSION.tar.?z* || exit 1 cd gimp-$VERSION || exit 1 + +zcat $CWD/gimp.png14.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -94,6 +106,14 @@ cp -a \ done ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/xap/gimp/gimp.png14.diff b/source/xap/gimp/gimp.png14.diff new file mode 100644 index 000000000..5af06d6e3 --- /dev/null +++ b/source/xap/gimp/gimp.png14.diff @@ -0,0 +1,19 @@ +--- ./plug-ins/file-ico/ico-load.c.orig 2009-07-20 15:20:51.000000000 -0500 ++++ ./plug-ins/file-ico/ico-load.c 2010-02-15 22:54:44.000000000 -0600 +@@ -287,14 +287,14 @@ + switch (color_type) + { + case PNG_COLOR_TYPE_GRAY: +- png_set_gray_1_2_4_to_8 (png_ptr); ++ png_set_expand_gray_1_2_4_to_8 (png_ptr); + if ( bit_depth == 16 ) + png_set_strip_16 (png_ptr); + png_set_gray_to_rgb (png_ptr); + png_set_add_alpha (png_ptr, 0xff, PNG_FILLER_AFTER); + break; + case PNG_COLOR_TYPE_GRAY_ALPHA: +- png_set_gray_1_2_4_to_8 (png_ptr); ++ png_set_expand_gray_1_2_4_to_8 (png_ptr); + if ( bit_depth == 16 ) + png_set_strip_16 (png_ptr); + png_set_gray_to_rgb (png_ptr); diff --git a/source/xap/gkrellm/gkrellm.SlackBuild b/source/xap/gkrellm/gkrellm.SlackBuild index 222f2567e..f5243b755 100755 --- a/source/xap/gkrellm/gkrellm.SlackBuild +++ b/source/xap/gkrellm/gkrellm.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.3.2 -PKGVER=2.3.2 -ARCH=${ARCH:-x86_64} +VERSION=2.3.4 +PKGVER=2.3.4 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -82,6 +91,14 @@ cp -a \ COPYRIGHT CREDITS INSTALL README Themes.html \ $PKG/usr/doc/gkrellm-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/gkrellm-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + gzip -9 $PKG/usr/man/man?/*.? mkdir -p $PKG/install @@ -105,9 +122,17 @@ cp gkrellm-countdown.so $PKG/usr/lib${LIBDIRSUFFIX}/gkrellm2/plugins mkdir -p $PKG/usr/doc/gkrellm-countdown-$COUNTDOWN cp -a \ - COPYING ChangeLog README \ + COPYING README \ $PKG/usr/doc/gkrellm-countdown-$COUNTDOWN +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/gkrellm-countdown-$COUNTDOWN) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Strip binaries: find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/xap/gnuchess/eboard.assert.diff b/source/xap/gnuchess/eboard.assert.diff new file mode 100644 index 000000000..182359318 --- /dev/null +++ b/source/xap/gnuchess/eboard.assert.diff @@ -0,0 +1,41 @@ +--- ./ntext.cc.orig 2008-02-22 09:51:22.000000000 -0600 ++++ ./ntext.cc 2010-02-19 21:53:58.000000000 -0600 +@@ -33,6 +33,7 @@ + #include <gtk/gtkselection.h> + #include "ntext.h" + #include "global.h" ++#include <assert.h> + + NLine::NLine() { + Text = NULL; +@@ -238,23 +239,27 @@ + int i; + NLine *nl; + char *p; ++ char *s; + + if (len < 0) { + discardExcess(); + return; + } + +- p = strchr(text, '\n'); ++ s = strdup(text); ++ assert(s != NULL); ++ p = strchr(s, '\n'); + if (p!=NULL) { + *p = 0; +- i = strlen(text); +- nl = new NLine(text, color); ++ i = strlen(s); ++ nl = new NLine(s, color); + *p = '\n'; + lines.push_back(nl); + formatLine(lines.size()-1); + append(&p[1], len-(i+1), color); + return; + } ++ free (s); + + // if search for \n failed, this is a single line + nl = new NLine(text, color); diff --git a/source/xap/gnuchess/gnuchess.SlackBuild b/source/xap/gnuchess/gnuchess.SlackBuild index 2b236ae40..99cb5c067 100755 --- a/source/xap/gnuchess/gnuchess.SlackBuild +++ b/source/xap/gnuchess/gnuchess.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,10 +23,19 @@ VERGNUCHESS=5.07 VERSJENG=11.2 -VEREBOARD=1.0.3 -VERXBOARD=4.2.7 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +VEREBOARD=1.1.1 +VERXBOARD=4.4.2 +BUILD=${BUILD:-5} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -36,6 +45,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -52,6 +63,7 @@ tar xvf $CWD/gnuchess-$VERGNUCHESS.tar.bz2 || exit 1 cd gnuchess-$VERGNUCHESS || exit 1 # make gnuchess compile with gcc4 zcat $CWD/gnuchess.gcc4_fix.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 +zcat $CWD/gnuchess.getline.glibc.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -101,6 +113,7 @@ cd $TMP rm -rf eboard-$VEREBOARD tar xvf $CWD/eboard-$VEREBOARD.tar.bz2 || exit 1 cd eboard-$VEREBOARD || exit 1 +zcat $CWD/eboard.assert.diff.gz | patch -p1 --verbose || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -122,7 +135,7 @@ cp -a \ ### XBoard cd $TMP rm -rf xboard-$VERXBOARD -tar xvf $CWD/xboard-$VERXBOARD.tar.bz2 || exit 1 +tar xvf $CWD/xboard-$VERXBOARD.tar.?z* || exit 1 cd xboard-$VERXBOARD || exit 1 chown -R root:root . find . \ @@ -132,10 +145,10 @@ find . \ -exec chmod 644 {} \; # --infodir is fubar. -zcat $CWD/xboard.infodir.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 +#zcat $CWD/xboard.infodir.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 # Taken from Debian to fix CVE-2004-2552 # FOR WHICH THERE IS NO ATTACK VECTOR!!! -zcat $CWD/xboard.buffer_overflow_fix.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 +#zcat $CWD/xboard.buffer_overflow_fix.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ diff --git a/source/xap/gnuchess/gnuchess.getline.glibc.diff b/source/xap/gnuchess/gnuchess.getline.glibc.diff new file mode 100644 index 000000000..51a45df1d --- /dev/null +++ b/source/xap/gnuchess/gnuchess.getline.glibc.diff @@ -0,0 +1,39 @@ +--- ./src/input.c.orig 2010-02-19 21:34:10.000000000 -0600 ++++ ./src/input.c 2010-02-19 21:36:33.000000000 -0600 +@@ -127,7 +127,7 @@ + (RealGameCnt+1)/2 + 1 ); + } + pthread_mutex_lock(&input_mutex); +- getline(prompt); ++ chess_getline(prompt); + input_status = INPUT_AVAILABLE; + pthread_cond_signal(&input_cond); + pthread_mutex_unlock(&input_mutex); +@@ -173,13 +173,13 @@ + { + #ifdef HAVE_LIBREADLINE + if (isatty(STDIN_FILENO)) { +- getline = getline_readline; ++ chess_getline = getline_readline; + using_history(); + } else { +- getline = getline_standard; ++ chess_getline = getline_standard; + } + #else +- getline = getline_standard; ++ chess_getline = getline_standard; + #endif + /* Start input thread */ + pthread_create(&input_thread, NULL, input_func, NULL); +--- ./src/common.h.orig 2003-06-30 06:28:38.000000000 -0500 ++++ ./src/common.h 2010-02-19 21:35:33.000000000 -0600 +@@ -745,7 +745,7 @@ + * Input routine, initialized to one of the specific + * input routines. The given argument is the prompt. + */ +-void (*getline) (char *); ++void (*chess_getline) (char *); + + #define MAXSTR 128 + extern char inputstr[MAXSTR]; diff --git a/source/xap/gnuchess/xboard.buffer_overflow_fix.diff b/source/xap/gnuchess/xboard.buffer_overflow_fix.diff deleted file mode 100644 index f36d36bad..000000000 --- a/source/xap/gnuchess/xboard.buffer_overflow_fix.diff +++ /dev/null @@ -1,95 +0,0 @@ -#! /bin/sh /usr/share/dpatch/dpatch-run -## 09_fix_-icshost_buffer_overflow.dpatch by Florian Ernst <florian@debian.org> -## -## All lines beginning with `## DP:' are a description of the patch. -## DP: Of minor importance, though, as there is probably no attack vector -## DP: See bug#343560 - -@DPATCH@ -diff -urNad xboard-4.2.7~/backend.c xboard-4.2.7/backend.c ---- xboard-4.2.7~/backend.c 2003-11-28 10:37:36.000000000 +0100 -+++ xboard-4.2.7/backend.c 2005-12-16 22:19:16.000000000 +0100 -@@ -692,7 +692,7 @@ - sprintf(buf, "Could not open comm port %s", - appData.icsCommPort); - } else { -- sprintf(buf, "Could not connect to host %s, port %s", -+ snprintf(buf, sizeof(buf), "Could not connect to host %s, port %s", - appData.icsHost, appData.icsPort); - } - DisplayFatalError(buf, err, 1); -@@ -869,18 +869,18 @@ - } else if (*appData.gateway != NULLCHAR) { - if (*appData.remoteShell == NULLCHAR) { - /* Use the rcmd protocol to run telnet program on a gateway host */ -- sprintf(buf, "%s %s %s", -+ snprintf(buf, sizeof(buf), "%s %s %s", - appData.telnetProgram, appData.icsHost, appData.icsPort); - return OpenRcmd(appData.gateway, appData.remoteUser, buf, &icsPR); - - } else { - /* Use the rsh program to run telnet program on a gateway host */ - if (*appData.remoteUser == NULLCHAR) { -- sprintf(buf, "%s %s %s %s %s", appData.remoteShell, -+ snprintf(buf, sizeof(buf), "%s %s %s %s %s", appData.remoteShell, - appData.gateway, appData.telnetProgram, - appData.icsHost, appData.icsPort); - } else { -- sprintf(buf, "%s %s -l %s %s %s %s", -+ snprintf(buf, sizeof(buf), "%s %s -l %s %s %s %s", - appData.remoteShell, appData.gateway, - appData.remoteUser, appData.telnetProgram, - appData.icsHost, appData.icsPort); -@@ -1684,7 +1684,7 @@ - - if (loggedOn && !have_set_title && ics_handle[0] != NULLCHAR) { - char buf[MSG_SIZ]; -- sprintf(buf, "%s@%s", ics_handle, appData.icsHost); -+ snprintf(buf, sizeof(buf), "%s@%s", ics_handle, appData.icsHost); - DisplayIcsInteractionTitle(buf); - have_set_title = TRUE; - } -@@ -4882,7 +4882,7 @@ - SendToProgram(buf, cps); - } - if (cps->sendICS) { -- sprintf(buf, "ics %s\n", appData.icsActive ? appData.icsHost : "-"); -+ snprintf(buf, sizeof(buf), "ics %s\n", appData.icsActive ? appData.icsHost : "-"); - SendToProgram(buf, cps); - } - cps->maybeThinking = FALSE; -diff -urNad xboard-4.2.7~/xboard.c xboard-4.2.7/xboard.c ---- xboard-4.2.7~/xboard.c 2003-11-19 09:42:18.000000000 +0100 -+++ xboard-4.2.7/xboard.c 2005-12-16 22:19:16.000000000 +0100 -@@ -6734,8 +6734,8 @@ - strcpy(icon, text); - strcpy(title, text); - } else if (appData.icsActive) { -- sprintf(icon, "%s", appData.icsHost); -- sprintf(title, "%s: %s", programName, appData.icsHost); -+ snprintf(icon, sizeof(icon), "%s", appData.icsHost); -+ snprintf(title, sizeof(title), "%s: %s", programName, appData.icsHost); - } else if (appData.cmailGameName[0] != NULLCHAR) { - sprintf(icon, "%s", "CMail"); - sprintf(title, "%s: %s", programName, "CMail"); -@@ -6804,7 +6804,7 @@ - } else { - fprintf(stderr, "%s: %s: %s\n", - programName, message, strerror(error)); -- sprintf(buf, "%s: %s", message, strerror(error)); -+ snprintf(buf, sizeof(buf), "%s: %s", message, strerror(error)); - message = buf; - } - if (appData.popupExitMessage && boardWidget && XtIsRealized(boardWidget)) { -@@ -7488,9 +7488,9 @@ - char cmdLine[MSG_SIZ]; - - if (port[0] == NULLCHAR) { -- sprintf(cmdLine, "%s %s", appData.telnetProgram, host); -+ snprintf(cmdLine, sizeof(cmdLine), "%s %s", appData.telnetProgram, host); - } else { -- sprintf(cmdLine, "%s %s %s", appData.telnetProgram, host, port); -+ snprintf(cmdLine, sizeof(cmdLine), "%s %s %s", appData.telnetProgram, host, port); - } - return StartChildProcess(cmdLine, "", pr); - } diff --git a/source/xap/gnuchess/xboard.infodir.diff b/source/xap/gnuchess/xboard.infodir.diff deleted file mode 100644 index 5c18bb026..000000000 --- a/source/xap/gnuchess/xboard.infodir.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./Makefile.in.orig 2003-11-28 13:12:57.000000000 -0800 -+++ ./Makefile.in 2004-06-26 15:47:07.000000000 -0700 -@@ -21,7 +21,7 @@ - # Yuck; the autoconf generated configure script sets an infodir variable - # and provides a command-line flag to change it, but the default is - # /usr/info instead of /usr/share/info. --infodir = $(prefix)/share/info -+infodir = /usr/info - - CC = @CC@ - CFLAGS = @CFLAGS@ @CPPFLAGS@ -DINFODIR=\"$(infodir)\" diff --git a/source/xap/gnuplot/gnuplot.SlackBuild b/source/xap/gnuplot/gnuplot.SlackBuild index f154e16d8..180336830 100755 --- a/source/xap/gnuplot/gnuplot.SlackBuild +++ b/source/xap/gnuplot/gnuplot.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.2.5 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=4.2.6 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) diff --git a/source/xap/gqview/doinst.sh b/source/xap/gqview/doinst.sh deleted file mode 100644 index 31da22647..000000000 --- a/source/xap/gqview/doinst.sh +++ /dev/null @@ -1,7 +0,0 @@ -if [ -x /usr/bin/update-desktop-database ]; then - /usr/bin/update-desktop-database usr/share/applications >/dev/null 2>&1 -fi -if [ -x /usr/bin/gtk-update-icon-cache ]; then - /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor > /dev/null 2>&1 -fi - diff --git a/source/xap/gucharmap/gucharmap.SlackBuild b/source/xap/gucharmap/gucharmap.SlackBuild index 36f526148..f95766621 100755 --- a/source/xap/gucharmap/gucharmap.SlackBuild +++ b/source/xap/gucharmap/gucharmap.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.26.2} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo gucharmap-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -84,6 +96,14 @@ cp -a \ COPYING* NEWS README TODO \ $PKG/usr/doc/gucharmap-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/xap/gv/gv.SlackBuild b/source/xap/gv/gv.SlackBuild index d28abd8ed..b30eb321c 100755 --- a/source/xap/gv/gv.SlackBuild +++ b/source/xap/gv/gv.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,19 @@ PKGNAM=gv -VERSION=${VERSION:-3.6.7} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) @@ -40,6 +49,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi cd $TMP @@ -101,11 +112,18 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING INSTALL NEWS README \ + AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install -#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG diff --git a/source/xap/imagemagick/imagemagick.SlackBuild b/source/xap/imagemagick/imagemagick.SlackBuild index cfa074977..eb285daf4 100755 --- a/source/xap/imagemagick/imagemagick.SlackBuild +++ b/source/xap/imagemagick/imagemagick.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,35 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-1} +# NOTE: This is to cope with ImageMagick version numbers such as 5.4.7-4, +# which occur fairly often (but not always). If these numbers are all the same, +# then this is not one of those versions. + +# This is a bit messy, so we'll explain it well. :-) + +# This is the base version number, which is needed to cd into the source tree +BASEVER=6.5.9-6 + +# This is the version number used in the source tarball filename +FILEVER=6.5.9-6 + +# This is the version number used in the package, where a version number cannot +# contain a '-' +PKGVER=6.5.9_6 + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,6 +59,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -43,22 +70,6 @@ PKG=$TMP/package-imagemagick rm -rf $PKG mkdir -p $TMP $PKG -# NOTE: This is to cope with ImageMagick version numbers such as 5.4.7-4, -# which occur fairly often (but not always). If these numbers are all the same, -# then this is not one of those versions. - -# This is a bit messy, so we'll explain it well. :-) - -# This is the base version number, which is needed to cd into the source tree -BASEVER=6.5.3-3 - -# This is the version number used in the source tarball filename -FILEVER=6.5.3-3 - -# This is the version number used in the package, where a version number cannot -# contain a '-' -PKGVER=6.5.3_3 - # --with-x or not --with-x, that is the question. It seems many other # distributions don't compile with X support, but it's been traditional # here. I am moving the prefix to /usr (instead of /usr/X11R6) though, @@ -132,6 +143,14 @@ cp -a \ AUTHORS LICENSE NEWS NOTICE Platforms.txt QuickStart.txt README.txt \ $PKG/usr/doc/Imag* +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/xap/mozilla-firefox/mozilla-firefox.SlackBuild b/source/xap/mozilla-firefox/mozilla-firefox.SlackBuild index 22dfb33bd..4de240384 100755 --- a/source/xap/mozilla-firefox/mozilla-firefox.SlackBuild +++ b/source/xap/mozilla-firefox/mozilla-firefox.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -26,11 +26,19 @@ # This is a source build script. Unfortunately, there is no official # binary tarball available for x86_64 -VERSION=${VERSION:-3.5.2} -ARCH=${ARCH:-x86_64} +VERSION=$(basename $(ls firefox-*.tar.bz2 | cut -d - -f 2 | rev | cut -f 3- -d . | rev) .source) +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi BUILD=${BUILD:-1} -MOZVERS=${MOZVERS:-1.9.1} +MOZVERS=${MOZVERS:-1.9.2} NUMJOBS=${NUMJOBS:-" -j7 "} @@ -61,7 +69,7 @@ mkdir -p $TMP $PKG/usr/lib${LIBDIRSUFFIX} cd $TMP rm -rf mozilla-$MOZVERS -tar xvf $CWD/firefox-$VERSION-source.tar.bz2 || exit 1 +tar xvf $CWD/firefox-$VERSION.source.tar.bz2 || exit 1 cd mozilla-$MOZVERS || exit 1 # Fix a long standing bug that's prevented staying current on GTK+. diff --git a/source/xap/mozilla-thunderbird/mimeTypes.rdf b/source/xap/mozilla-thunderbird/mimeTypes.rdf new file mode 100644 index 000000000..366df44bc --- /dev/null +++ b/source/xap/mozilla-thunderbird/mimeTypes.rdf @@ -0,0 +1,113 @@ +<?xml version="1.0"?> + +<!-- + This file is used as a persistent data store for helper application + information about both MIME type and protocol scheme helpers. + + The root of the data are the two containers + <RDF:Seq about="urn:mimetypes:root"/> and <RDF:Seq about="urn:schemes:root"/>. + + These contain one <RDF:li/> entry per MIME type/protocol. Each <RDF:li/> entry + corresponds to a "urn:<class>:<type>" resource, where <class> is either + "mimetype" or "scheme" and <type> is either a MIME type in "major/minor" format + or a scheme. For example, for HTML we would have "urn:mimetype:text/html", + while for mailto: we would have "urn:scheme:mailto". + + Typically, this resource will be in the <RDF:Description/> node which has the + corresponding "about" attribute. + + Each "urn:<class>:<type>" resource can have the following properties: + + NC:Value - the MIME type or scheme string + NC:editable - a "true" or "false" depending on whether this entry is + editable + NC:description - a description of the type ("HTML Document" for text/html) + NC:fileExtensions - for MIME types, there will be one of these properties + per extension that corresponds to this MIME type, + each one having a single extension as its value. + NC:handlerProp - the way the type should be handled. This corresponds to a + "urn:<class>:handler:<type>" resource. Eg, the way HTML is + handled would be stored in the + "urn:mimetype:handler:text/html" resource. + + Each "urn:<class>:handler:<type>" resource can have the following properties: + + NC:useSystemDefault - "true" if we should handle per default OS setting, + "false" or not set otherwise + NC:saveToDisk - "true" if the data should be saved to disk, "false" or not + set otherwise. + (Note - if both of these are false, that means "open in helper app") + NC:alwaysAsk - "true" if the user should always be prompted before handling + data of this type, false otherwise. + NC:externalApplication - the preferred helper application to use for this + type. This corresponds to a + "urn:<class>:externalApplication:<type>" resource. + NC:possibleApplication - a helper application that can be used for this type. + Since there can be multiple possible applications, + there can be multiple assertions in the graph with + this property for a given handler resource. + + Each "urn:<class>:externalApplication:<type>" resource, and each resource + that represents a possible application, can have the following property: + + NC:prettyName - the "pretty name" of the application ("Acrobat Reader" for + /usr/bin/acroread, eg). + + If the resource represents a local application, then it can have the following + property: + + NC:path - the path to the application on the local filesystem, for example + /usr/bin/test or C:\windows\system32\cmd.exe. + + If the resource represents a web application, then it can have the following + property: + + NC:uriTemplate - a URI pointing to the web application to which the type + should be handed off, with %s in the template representing + the place where the content should be inserted. For example, + here is a URI template for a service that lets you email + an address in a mailto: link: + http://www.example.com/sendmail?link=%s +--> + +<RDF:RDF xmlns:RDF="http://www.w3.org/1999/02/22-rdf-syntax-ns#" + xmlns:NC="http://home.netscape.com/NC-rdf#"> + + <RDF:Description about="urn:mimetypes"> + <NC:MIME-types> + <RDF:Seq about="urn:mimetypes:root"> + </RDF:Seq> + </NC:MIME-types> + </RDF:Description> + + <RDF:Description RDF:about="urn:scheme:handler:http" + NC:alwaysAsk="false"> + <NC:externalApplication RDF:resource="urn:scheme:externalApplication:http"/> + </RDF:Description> + <RDF:Description RDF:about="urn:scheme:externalApplication:http" + NC:prettyName="firefox" + NC:path="/usr/bin/firefox" /> + <RDF:Description RDF:about="urn:schemes"> + <NC:Protocol-Schemes RDF:resource="urn:schemes:root"/> + </RDF:Description> + <RDF:Description RDF:about="urn:scheme:http" + NC:value="http"> + <NC:handlerProp RDF:resource="urn:scheme:handler:http"/> + </RDF:Description> + + <RDF:Description RDF:about="urn:scheme:handler:https" + NC:alwaysAsk="false"> + <NC:externalApplication RDF:resource="urn:scheme:externalApplication:https"/> + </RDF:Description> + <RDF:Description RDF:about="urn:scheme:externalApplication:https" + NC:prettyName="firefox" + NC:path="/usr/bin/firefox" /> + <RDF:Description RDF:about="urn:schemes"> + <NC:Protocol-Schemes RDF:resource="urn:schemes:root"/> + </RDF:Description> + <RDF:Description RDF:about="urn:scheme:https" + NC:value="https"> + <NC:handlerProp RDF:resource="urn:scheme:handler:https"/> + </RDF:Description> + +</RDF:RDF> diff --git a/source/xap/mozilla-thunderbird/mozilla-thunderbird-firefox.diff b/source/xap/mozilla-thunderbird/mozilla-thunderbird-firefox.diff deleted file mode 100644 index fdf20963d..000000000 --- a/source/xap/mozilla-thunderbird/mozilla-thunderbird-firefox.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./defaults/pref/all-thunderbird.js.orig 2005-10-25 22:03:39.000000000 -0500 -+++ ./defaults/pref/all-thunderbird.js 2005-12-09 16:22:00.000000000 -0600 -@@ -440,3 +440,8 @@ - - // prevent status-bar spoofing even if people are foolish enough to turn on JS - pref("dom.disable_window_status_change", true); -+ -+// Use Firefox as the default for http:// and https:// links -+pref("network.protocol-handler.app.http", "/usr/bin/firefox"); -+pref("network.protocol-handler.app.https", "/usr/bin/firefox"); -+ diff --git a/source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild b/source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild index 9872927db..0a521dd70 100755 --- a/source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild +++ b/source/xap/mozilla-thunderbird/mozilla-thunderbird.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,21 +23,42 @@ # Thanks to the folks at the Mozilla Foundation for permission to # distribute this, and for all the great work! :-) -VERSION=2.0.0.23 -ARCH=${ARCH:-x86_64} +# This is a source build script. Unfortunately, there is no official +# binary tarball available for x86_64 + +VERSION=$(basename $(ls thunderbird-*.tar.bz2 | cut -d - -f 2 | rev | cut -f 3- -d . | rev) .source) + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi BUILD=${BUILD:-1} +MOZVERS=${MOZVERS:-1.9.1} + NUMJOBS=${NUMJOBS:-" -j7 "} +# Try to be gentle to the compiler, no optimizations: if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-Os -march=i486 -mcpu=i686" + SLKCFLAGS="-O" LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-Os" + SLKCFLAGS="-O" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-Os -fPIC" + SLKCFLAGS="-O -fPIC" LIBDIRSUFFIX="64" +elif [ "$ARCH" = "arm" ]; then + SLKCFLAGS="-O2 -march=armv4 -mtune=xscale" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "armel" ]; then + SLKCFLAGS="-O2 -march=armv4t" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -45,12 +66,23 @@ TMP=${TMP:-/tmp} PKG=$TMP/package-mozilla-thunderbird rm -rf $PKG -mkdir -p $TMP $PKG +mkdir -p $TMP $PKG/usr/lib${LIBDIRSUFFIX} cd $TMP -rm -rf mozilla -tar xvf $CWD/thunderbird-$VERSION-source.tar.bz2 || exit 1 -cd mozilla || exit 1 +rm -rf comm-$MOZVERS +tar xvf $CWD/thunderbird-$VERSION.source.tar.bz2 || exit 1 +cd comm-$MOZVERS || exit 1 + +# Fix a long standing bug that's prevented staying current on GTK+. +# Thanks to the BLFS folks. :-) +cat << EOF >> mozilla/layout/build/Makefile.in + +ifdef MOZ_ENABLE_CANVAS +EXTRA_DSO_LDOPTS += \$(XLDFLAGS) -lX11 -lXrender +endif + +EOF + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -60,7 +92,7 @@ find . \ export MOZILLA_OFFICIAL="1" && export BUILD_OFFICIAL="1" && -export MOZ_CO_PROJECT="mail" && +export MOZ_PHOENIX="1" && export CFLAGS="$SLKCFLAGS" && export CXXFLAGS="$SLKCFLAGS" && ./configure \ @@ -68,61 +100,60 @@ export CXXFLAGS="$SLKCFLAGS" && --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --with-default-mozilla-five-home=/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION \ - --with-user-appdir=.thunderbird \ --with-system-zlib \ - --with-system-png \ --enable-application=mail \ - --enable-default-toolkit=gtk2 \ + --enable-default-toolkit=cairo-gtk2 \ --enable-crypto \ + --enable-svg \ + --enable-canvas \ --enable-xft \ - --enable-pango \ --enable-xinerama \ --enable-optimize \ --enable-reorder \ + --enable-static \ --enable-strip \ + --enable-system-cairo \ --enable-cpp-rtti \ --enable-single-profile \ - --enable-ldap \ - --disable-freetype2 \ + --disable-ldap \ --disable-accessibility \ --disable-debug \ --disable-tests \ --disable-logging \ --disable-pedantic \ --disable-installer \ - --disable-profilesharing \ - --disable-gnomevfs \ - --disable-gnomeui + --disable-profilesharing + # Complains about missing APNG support in Slackware's libpng: + #--with-system-png \ -make MOZ_OPT_FLAGS="$SLKCFLAGS" MOZ_MAKE_FLAGS="$NUMJOBS" || make || exit 1 +#make -f client.mk build MOZ_MAKE_FLAGS="$NUMJOBS" || exit 1 +make MOZ_MAKE_FLAGS="$NUMJOBS" || exit 1 make install DESTDIR=$PKG || exit 1 -# We do not need 20+ MB of includes: +# We don't need these (just symlinks anyway): +rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-devel-$VERSION + +# Nor these: rm -rf $PKG/usr/include ( cd $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION - echo "Applying firefox patch" - zcat $CWD/mozilla-thunderbird-firefox.diff.gz | patch -p0 --verbose || exit 1 + cp -a defaults/profile/mimeTypes.rdf defaults/profile/mimeTypes.rdf.orig + zcat $CWD/mimeTypes.rdf > defaults/profile/mimeTypes.rdf || exit 1 ) || exit 1 +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins mkdir -p $PKG/usr/share/applications cat $CWD/mozilla-thunderbird.desktop > $PKG/usr/share/applications/mozilla-thunderbird.desktop mkdir -p $PKG/usr/share/pixmaps cat $CWD/thunderbird.png > $PKG/usr/share/pixmaps/thunderbird.png -mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION/chrome/icons/default/ -install -m 644 other-licenses/branding/thunderbird/default.xpm \ - $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION/chrome/icons/default/ -install -m 644 other-licenses/branding/thunderbird/default.xpm \ - $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION/icons/ - -# These files/directories are usually created if Thunderbird is run as root, -# which on many systems might (and possibly should) be never. Therefore, -# if we don't see them we'll put stubs in place to prevent startup errors. +# These files/directories are usually created if Firefox is run as root, +# which on many systems might (and possibly should) be never. Therefore, if we +# don't see them we'll put stubs in place to prevent startup errors. ( cd $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION - if [ -d chrome ]; then - if [ ! -r chrome/app-chrome.manifest ]; then - echo > chrome/app-chrome.manifest + if [ -d extensions/talkback\@mozilla.org ]; then + if [ ! -r extensions/talkback\@mozilla.org/chrome.manifest ]; then + echo > extensions/talkback\@mozilla.org/chrome.manifest fi fi if [ ! -d updates ]; then @@ -130,12 +161,22 @@ install -m 644 other-licenses/branding/thunderbird/default.xpm \ fi ) +# Need some default icons in the right place: +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION/chrome/icons/default +install -m 644 other-licenses/branding/thunderbird/default16.png \ + $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION/icons/ +install -m 644 other-licenses/branding/thunderbird/default16.png \ + $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION/chrome/icons/default/ +( cd $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION + install -m 644 icons/{default,mozicon50}.xpm chrome/icons/default/ +) + # Copy over the LICENSE -install -c -m 644 LICENSE $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION +install -p -c -m 644 LICENSE $PKG/usr/lib${LIBDIRSUFFIX}/thunderbird-$VERSION/ mkdir $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/mozilla-thunderbird-$VERSION-${ARCH}-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/mozilla-thunderbird-$VERSION-$ARCH-$BUILD.txz diff --git a/source/xap/mozilla-thunderbird/thunderbird.png b/source/xap/mozilla-thunderbird/thunderbird.png Binary files differindex a6172dcda..61a37d70e 100644 --- a/source/xap/mozilla-thunderbird/thunderbird.png +++ b/source/xap/mozilla-thunderbird/thunderbird.png diff --git a/source/xap/pan/pan.SlackBuild b/source/xap/pan/pan.SlackBuild index 288b34a7b..4bfbcf7f5 100755 --- a/source/xap/pan/pan.SlackBuild +++ b/source/xap/pan/pan.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,18 @@ PKGNAM=pan -VERSION=${VERSION:-0.133} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -35,6 +44,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi CWD=$(pwd) @@ -48,6 +59,9 @@ rm -rf ${PKGNAM}-${VERSION} tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 cd ${PKGNAM}-$VERSION || exit 1 +zcat $CWD/pan.gmime2.4.diff.gz | patch -p1 || exit 1 +zcat $CWD/pan.gcc44.diff.gz | patch -p1 || exit 1 + # Make sure ownerships and permissions are sane: chown -R root:root . find . \ diff --git a/source/xap/pan/pan.gcc44.diff b/source/xap/pan/pan.gcc44.diff new file mode 100644 index 000000000..22df125f8 --- /dev/null +++ b/source/xap/pan/pan.gcc44.diff @@ -0,0 +1,50 @@ +--- ./pan/usenet-utils/numbers.cc.orig 2008-07-04 10:01:53.000000000 -0500 ++++ ./pan/usenet-utils/numbers.cc 2010-02-03 18:06:16.000000000 -0600 +@@ -19,6 +19,7 @@ + + #include <config.h> + #include <cctype> ++#include <cstdio> + #include <pan/general/string-view.h> + #include "numbers.h" + #include <algorithm> +--- ./pan/tasks/nntp.cc.orig 2008-07-05 14:16:06.000000000 -0500 ++++ ./pan/tasks/nntp.cc 2010-02-03 18:07:19.000000000 -0600 +@@ -20,6 +20,7 @@ + #include <config.h> + #include <cassert> + #include <cstdarg> ++#include <cstdio> + #include <cstdlib> // abort, atoi, strtoul + extern "C" { + #include <glib.h> +--- ./pan/tasks/nntp-pool.cc.orig 2008-07-05 01:39:27.000000000 -0500 ++++ ./pan/tasks/nntp-pool.cc 2010-02-03 18:07:55.000000000 -0600 +@@ -19,6 +19,7 @@ + + #include <config.h> + #include <ctime> ++#include <cstdio> + #include <glib/gi18n.h> + #include <pan/general/debug.h> + #include <pan/general/log.h> +--- ./pan/general/progress.cc.orig 2007-08-01 12:00:01.000000000 -0500 ++++ ./pan/general/progress.cc 2010-02-03 18:05:38.000000000 -0600 +@@ -19,6 +19,7 @@ + + #include <config.h> + #include <cstdarg> ++#include <cstdio> + #include "progress.h" + #include "string-view.h" + +--- ./pan/general/log.cc.orig 2007-08-01 12:00:01.000000000 -0500 ++++ ./pan/general/log.cc 2010-02-03 18:05:19.000000000 -0600 +@@ -20,6 +20,7 @@ + #include <config.h> + #include <iostream> + #include <cstdarg> ++#include <cstdio> + #include "log.h" + + using namespace pan; diff --git a/source/xap/pan/pan.gmime2.4.diff b/source/xap/pan/pan.gmime2.4.diff new file mode 100644 index 000000000..4816ea6cd --- /dev/null +++ b/source/xap/pan/pan.gmime2.4.diff @@ -0,0 +1,1271 @@ +diff -ru pan-0.133.orig/configure pan-0.133/configure +--- pan-0.133.orig/configure 2008-07-29 19:02:08.000000000 -0700 ++++ pan-0.133/configure 2009-09-12 14:58:05.000000000 -0700 +@@ -2377,7 +2377,7 @@ + + PCRE_REQUIRED=5.0 + GLIB_REQUIRED=2.4.0 +-GMIME_REQUIRED=2.1.9 ++GMIME_REQUIRED=2.3.5 + GTK_REQUIRED=2.4.0 + GTKSPELL_REQUIRED=2.0.7 + +@@ -7957,12 +7957,12 @@ + pkg_cv_GMIME_CFLAGS="$GMIME_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gmime-2.0 >= \$GMIME_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gmime-2.0 >= $GMIME_REQUIRED") 2>&5 ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gmime-2.4 >= \$GMIME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gmime-2.4 >= $GMIME_REQUIRED") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- pkg_cv_GMIME_CFLAGS=`$PKG_CONFIG --cflags "gmime-2.0 >= $GMIME_REQUIRED" 2>/dev/null` ++ pkg_cv_GMIME_CFLAGS=`$PKG_CONFIG --cflags "gmime-2.4 >= $GMIME_REQUIRED" 2>/dev/null` + else + pkg_failed=yes + fi +@@ -7973,12 +7973,12 @@ + pkg_cv_GMIME_LIBS="$GMIME_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ +- { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gmime-2.0 >= \$GMIME_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gmime-2.0 >= $GMIME_REQUIRED") 2>&5 ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gmime-2.4 >= \$GMIME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gmime-2.4 >= $GMIME_REQUIRED") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- pkg_cv_GMIME_LIBS=`$PKG_CONFIG --libs "gmime-2.0 >= $GMIME_REQUIRED" 2>/dev/null` ++ pkg_cv_GMIME_LIBS=`$PKG_CONFIG --libs "gmime-2.4 >= $GMIME_REQUIRED" 2>/dev/null` + else + pkg_failed=yes + fi +@@ -7996,14 +7996,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- GMIME_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gmime-2.0 >= $GMIME_REQUIRED" 2>&1` ++ GMIME_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gmime-2.4 >= $GMIME_REQUIRED" 2>&1` + else +- GMIME_PKG_ERRORS=`$PKG_CONFIG --print-errors "gmime-2.0 >= $GMIME_REQUIRED" 2>&1` ++ GMIME_PKG_ERRORS=`$PKG_CONFIG --print-errors "gmime-2.4 >= $GMIME_REQUIRED" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$GMIME_PKG_ERRORS" >&5 + +- { { echo "$as_me:$LINENO: error: Package requirements (gmime-2.0 >= $GMIME_REQUIRED) were not met: ++ { { echo "$as_me:$LINENO: error: Package requirements (gmime-2.4 >= $GMIME_REQUIRED) were not met: + + $GMIME_PKG_ERRORS + +@@ -8014,7 +8014,7 @@ + and GMIME_LIBS to avoid the need to call pkg-config. + See the pkg-config man page for more details. + " >&5 +-echo "$as_me: error: Package requirements (gmime-2.0 >= $GMIME_REQUIRED) were not met: ++echo "$as_me: error: Package requirements (gmime-2.4 >= $GMIME_REQUIRED) were not met: + + $GMIME_PKG_ERRORS + +diff -ru pan-0.133.orig/configure.in pan-0.133/configure.in +--- pan-0.133.orig/configure.in 2008-07-29 19:00:01.000000000 -0700 ++++ pan-0.133/configure.in 2009-09-12 14:52:37.000000000 -0700 +@@ -18,7 +18,7 @@ + + PCRE_REQUIRED=5.0 + GLIB_REQUIRED=2.4.0 +-GMIME_REQUIRED=2.1.9 ++GMIME_REQUIRED=2.3.5 + GTK_REQUIRED=2.4.0 + GTKSPELL_REQUIRED=2.0.7 + AC_SUBST(PCRE_REQUIRED) +@@ -50,7 +50,7 @@ + + PKG_CHECK_MODULES(PCRE, libpcre >= $PCRE_REQUIRED) + AM_PATH_GLIB_2_0($GLIB_REQUIRED,,exit 1,gobject gmodule gthread) +-PKG_CHECK_MODULES(GMIME, gmime-2.0 >= $GMIME_REQUIRED) ++PKG_CHECK_MODULES(GMIME, gmime-2.4 >= $GMIME_REQUIRED) + AM_PATH_GTK_2_0($GTK_REQUIRED,,exit 1,gthread) + + +--- pan-0.133.orig/pan/general/utf8-utils.cc 2008-07-04 23:13:14.000000000 -0700 ++++ pan-0.133/pan/general/utf8-utils.cc 2009-09-12 14:38:13.000000000 -0700 +@@ -136,7 +136,7 @@ + { + std::string s = content_to_utf8 (header, fallback_charset1, fallback_charset2); + if (header.strstr ("=?")) { +- char * decoded (g_mime_utils_8bit_header_decode ((const guchar*) s.c_str())); ++ char * decoded (g_mime_utils_header_decode_text (s.c_str())); + s = clean_utf8 (decoded); + g_free (decoded); + } +@@ -147,15 +147,26 @@ + pan :: mime_part_to_utf8 (GMimePart * part, + const char * fallback_charset) + { ++ GMimeDataWrapper *content; ++ GMimeStream *stream; ++ const char *charset; ++ GByteArray *buffer; + std::string ret; + + g_return_val_if_fail (GMIME_IS_PART(part), ret); + +- size_t content_len (0); +- const char * specified_charset (g_mime_object_get_content_type_parameter (GMIME_OBJECT (part), "charset")); +- const char * content = g_mime_part_get_content (part, &content_len); +- if (content && content_len) +- ret = content_to_utf8 (StringView (content, content_len), specified_charset, fallback_charset); ++ charset = g_mime_object_get_content_type_parameter (GMIME_OBJECT (part), "charset"); ++ content = g_mime_part_get_content_object (part); ++ ++ stream = g_mime_stream_mem_new (); ++ g_mime_data_wrapper_write_to_stream (content, stream); ++//g_object_unref(content); //SKG gmime 2.4 don't unref returned data wrapper ++ ++ buffer = ((GMimeStreamMem *) stream)->buffer; ++ ++ ret = content_to_utf8 (StringView ((const char *) buffer->data, buffer->len), charset, fallback_charset); ++ ++ g_object_unref (stream); + + return ret; + } +diff -ru pan-0.133.orig/pan/gui/body-pane.cc pan-0.133/pan/gui/body-pane.cc +--- pan-0.133.orig/pan/gui/body-pane.cc 2008-07-06 07:20:54.000000000 -0700 ++++ pan-0.133/pan/gui/body-pane.cc 2009-09-12 14:41:46.000000000 -0700 +@@ -837,7 +837,7 @@ + } + + g_object_unref (mem_stream); +- g_object_unref (wrapper); ++ //g_object_unref (wrapper); //SKG gmime 2.4 don't unref returned data wrapper + } + + // flush the loader +@@ -874,7 +874,7 @@ + return; + + GMimePart * part = GMIME_PART (obj); +- const GMimeContentType * type = g_mime_object_get_content_type (GMIME_OBJECT (part)); ++ GMimeContentType * type = g_mime_object_get_content_type (GMIME_OBJECT (part)); + + // decide whether or not this part is a picture + bool is_image (g_mime_content_type_is_type (type, "image", "*")); +@@ -952,11 +952,11 @@ + GtkTextIter iter; + gtk_text_buffer_get_end_iter (_buffer, &iter); + gtk_text_buffer_insert (_buffer, &iter, pch, -1); +- g_free (pch); ++// g_free (pch); //SKG don't unref returned const char * + } + } + void +-BodyPane :: foreach_part_cb (GMimeObject* o, gpointer self) ++BodyPane :: foreach_part_cb (GMimeObject* /*parent*/, GMimeObject* o, gpointer self) + { + if (GMIME_IS_MULTIPART (o)) + g_mime_multipart_foreach (GMIME_MULTIPART (o), foreach_part_cb, self); +@@ -978,7 +978,7 @@ + const char * key, + const char * fallback_charset) + { +- const char * val (message ? g_mime_message_get_header (message, key) : ""); ++ const char * val (message ? g_mime_object_get_header ((GMimeObject *) message, key) : ""); + const std::string utf8_val (header_to_utf8 (val, fallback_charset)); + char * e (0); + if (strcmp (key, "From")) +@@ -1015,7 +1015,7 @@ + const char * key, + const char * fallback_charset) + { +- const char * val (msg ? g_mime_message_get_header (msg, key) : ""); ++ const char * val (msg ? g_mime_object_get_header ((GMimeObject *) msg, key) : ""); + return add_header_line (s, key_i18n, key, val, fallback_charset); + } + } +@@ -1037,19 +1037,19 @@ + + // conditional headers... + if (message) { +- const StringView newsgroups (g_mime_message_get_header (message, "Newsgroups")); ++ const StringView newsgroups (g_mime_object_get_header ((GMimeObject *) message, "Newsgroups")); + if (newsgroups.strchr(',')) { + l = add_header_line (s, message, _("Newsgroups"), "Newsgroups", fallback_charset); + w = std::max (w, l); + } +- const StringView followup_to (g_mime_message_get_header (message, "Followup-To")); ++ const StringView followup_to (g_mime_object_get_header ((GMimeObject *) message, "Followup-To")); + if (!followup_to.empty() && (followup_to!=newsgroups)) { + l = add_header_line (s, message, _("Followup-To"), "Followup-To", fallback_charset); + w = std::max (w, l); + } +- const StringView reply_to (g_mime_message_get_header (message, "Reply-To")); ++ const StringView reply_to (g_mime_object_get_header ((GMimeObject *) message, "Reply-To")); + if (!reply_to.empty()) { +- const StringView from (g_mime_message_get_header (message, "From")); ++ const StringView from (g_mime_object_get_header ((GMimeObject *) message, "From")); + StringView f_addr, f_name, rt_addr, rt_name; + GNKSA :: do_check_from (from, f_addr, f_name, false); + GNKSA :: do_check_from (reply_to, rt_addr, rt_name, false); +@@ -1070,7 +1070,7 @@ + + // set the x-face... + GdkPixbuf * pixbuf (0); +- const char * pch = message ? g_mime_message_get_header (message, "X-Face") : 0; ++ const char * pch = message ? g_mime_object_get_header ((GMimeObject *) message, "X-Face") : 0; + if (pch && _xface->window) + pixbuf = pan_gdk_pixbuf_create_from_x_face (gtk_widget_get_colormap(_xface), _xface->window, pch); + gtk_image_set_from_pixbuf (GTK_IMAGE(_xface), pixbuf); +@@ -1101,7 +1101,7 @@ + // maybe add the headers + const bool do_show_headers (_prefs.get_flag ("show-all-headers", false)); + if (message && do_show_headers) { +- char * headers (g_mime_message_get_headers (message)); ++ char * headers (g_mime_object_get_headers ((GMimeObject *) message)); + GtkTextIter end; + gtk_text_buffer_get_end_iter (_buffer, &end); + StringView line, v(headers); +@@ -1119,7 +1119,7 @@ + + // set the text buffer... + if (message) +- g_mime_message_foreach_part (message, foreach_part_cb, this); ++ g_mime_message_foreach (message, foreach_part_cb, this); + + // if there was a picture, scroll to it. + // otherwise scroll to the top of the body. +@@ -1514,7 +1514,7 @@ + const char * fallback_charset_1, + const char * fallback_charset_2) + { +- const StringView v (g_mime_message_get_header (msg, key)); ++ const StringView v (g_mime_object_get_header ((GMimeObject *) msg, key)); + std::string s; + if (!v.empty()) + s = header_to_utf8 (v, fallback_charset_1, fallback_charset_2); +@@ -1527,7 +1527,7 @@ + std::string body; + }; + +- void get_utf8_body_foreach_part (GMimeObject *o, gpointer user_data) ++ void get_utf8_body_foreach_part (GMimeObject * /*parent*/, GMimeObject *o, gpointer user_data) + { + if (GMIME_IS_MULTIPART(o)) + { +@@ -1538,7 +1538,7 @@ + else + { + GMimePart * part = GMIME_PART (o); +- const GMimeContentType * type = g_mime_object_get_content_type (o); ++ GMimeContentType * type = g_mime_object_get_content_type (o); + const bool is_text (g_mime_content_type_is_type (type, "text", "*")); + if (is_text) + { +@@ -1555,7 +1555,7 @@ + if (fallback_charset) + tmp.fallback_charset = fallback_charset; + if (source) +- g_mime_message_foreach_part (source, get_utf8_body_foreach_part, &tmp); ++ g_mime_message_foreach (source, get_utf8_body_foreach_part, &tmp); + return tmp.body; + } + } +@@ -1571,7 +1571,7 @@ + + // fallback character encodings + const char * group_charset (_charset.c_str()); +- const GMimeContentType * type (g_mime_object_get_content_type (GMIME_OBJECT(_message))); ++ GMimeContentType * type (g_mime_object_get_content_type (GMIME_OBJECT(_message))); + const char * message_charset (type ? g_mime_content_type_get_parameter (type, "charset") : 0); + + /// +@@ -1585,14 +1585,14 @@ + const std::string reply_to (get_header (_message, "Reply-To", message_charset, group_charset)); + if (is_reply || fup_to=="poster") { + const std::string& to (reply_to.empty() ? from : reply_to); +- g_mime_message_add_recipients_from_string (msg, (char*)GMIME_RECIPIENT_TYPE_TO, to.c_str()); ++ g_mime_message_add_recipients_from_string (msg, GMIME_RECIPIENT_TYPE_TO, to.c_str()); + } else { + const std::string& groups (fup_to.empty() ? newsgroups : fup_to); +- g_mime_message_add_header (msg, "Newsgroups", groups.c_str()); ++ g_mime_object_append_header ((GMimeObject *) msg, "Newsgroups", groups.c_str()); + } + + // Subject: +- StringView v = g_mime_message_get_header (_message, "Subject"); ++ StringView v = g_mime_object_get_header ((GMimeObject *) _message, "Subject"); + std::string h = header_to_utf8 (v, message_charset, group_charset); + std::string val (normalize_subject_re (h)); + if (val.find ("Re:") != 0) // add "Re: " if we don't have one +@@ -1601,22 +1601,22 @@ + + // attribution lines + +- const char * cpch = g_mime_message_get_header (_message, "From"); ++ const char * cpch = g_mime_object_get_header ((GMimeObject *) _message, "From"); + h = header_to_utf8 (cpch, message_charset, group_charset); +- g_mime_message_add_header (msg, "X-Draft-Attribution-Author", h.c_str()); ++ g_mime_object_append_header ((GMimeObject *) msg, "X-Draft-Attribution-Author", h.c_str()); + + cpch = g_mime_message_get_message_id (_message); + h = header_to_utf8 (cpch, message_charset, group_charset); +- g_mime_message_add_header (msg, "X-Draft-Attribution-Id", h.c_str()); ++ g_mime_object_append_header ((GMimeObject *) msg, "X-Draft-Attribution-Id", h.c_str()); + +- char * tmp = g_mime_message_get_date_string (_message); ++ char * tmp = g_mime_message_get_date_as_string (_message); + h = header_to_utf8 (tmp, message_charset, group_charset); +- g_mime_message_add_header (msg, "X-Draft-Attribution-Date", h.c_str()); ++ g_mime_object_append_header ((GMimeObject *) msg, "X-Draft-Attribution-Date", h.c_str()); + g_free (tmp); + + // references + const char * header = "References"; +- v = g_mime_message_get_header (_message, header); ++ v = g_mime_object_get_header ((GMimeObject *) _message, header); + val.assign (v.str, v.len); + if (!val.empty()) + val += ' '; +@@ -1624,7 +1624,7 @@ + val += g_mime_message_get_message_id (_message); + val += ">"; + val = GNKSA :: trim_references (val); +- g_mime_message_add_header (msg, header, val.c_str()); ++ g_mime_object_append_header ((GMimeObject *) msg, header, val.c_str()); + + /// + /// BODY +@@ -1660,17 +1660,17 @@ + // set the clone's content object with our modified body + GMimeStream * stream = g_mime_stream_mem_new (); + g_mime_stream_write_string (stream, s.c_str()); +- GMimeDataWrapper * wrapper = g_mime_data_wrapper_new_with_stream (stream, GMIME_PART_ENCODING_8BIT); ++ GMimeDataWrapper * wrapper = g_mime_data_wrapper_new_with_stream (stream, GMIME_CONTENT_ENCODING_8BIT); + GMimePart * part = g_mime_part_new (); + GMimeContentType * new_type = g_mime_content_type_new_from_string ("text/plain; charset=UTF-8"); +- g_mime_part_set_content_type (part, new_type); ++ g_mime_object_set_content_type ((GMimeObject *) part, new_type); + g_mime_part_set_content_object (part, wrapper); +- g_mime_part_set_encoding (part, GMIME_PART_ENCODING_8BIT); ++ g_mime_part_set_content_encoding (part, GMIME_CONTENT_ENCODING_8BIT); + g_mime_message_set_mime_part (msg, GMIME_OBJECT(part)); + g_object_unref (wrapper); + g_object_unref (part); + g_object_unref (stream); +-//std::cerr << LINE_ID << " here is the modified clone\n [" << g_mime_message_to_string(msg) << ']' << std::endl; ++//std::cerr << LINE_ID << " here is the modified clone\n [" << g_mime_object_to_string((GMimeObject *) msg) << ']' << std::endl; + } + + return msg; +diff -ru pan-0.133.orig/pan/gui/body-pane.h pan-0.133/pan/gui/body-pane.h +--- pan-0.133.orig/pan/gui/body-pane.h 2008-07-04 10:57:39.000000000 -0700 ++++ pan-0.133/pan/gui/body-pane.h 2009-09-08 20:40:40.000000000 -0700 +@@ -86,7 +86,7 @@ + void append_part (GMimeObject*, GtkAllocation*); + static gboolean expander_activated_idle (gpointer self); + static void expander_activated_cb (GtkExpander*, gpointer self); +- static void foreach_part_cb (GMimeObject*, gpointer self); ++ static void foreach_part_cb (GMimeObject*, GMimeObject*, gpointer self); + static void text_size_allocated (GtkWidget*, GtkAllocation*, gpointer); + static gboolean text_size_allocated_idle_cb (gpointer p); + void text_size_allocated_idle (); +diff -ru pan-0.133.orig/pan/gui/gui.cc pan-0.133/pan/gui/gui.cc +--- pan-0.133.orig/pan/gui/gui.cc 2008-07-05 00:14:56.000000000 -0700 ++++ pan-0.133/pan/gui/gui.cc 2009-09-12 14:44:06.000000000 -0700 +@@ -31,6 +31,7 @@ + #include <pan/general/file-util.h> + #include <pan/general/macros.h> + #include <pan/usenet-utils/scorefile.h> ++#include <pan/usenet-utils/mime-utils.h> + #include <pan/tasks/task-article.h> + #include <pan/tasks/task-groups.h> + #include <pan/tasks/task-xover.h> +@@ -567,7 +568,7 @@ + ArticleCache& c, const Article& a, const std::string& path): + _data(d), _queue(q), _root(r), _prefs(p), _cache(c), _article(a), _path(path) {} + +- static void foreach_part_cb (GMimeObject *o, gpointer self) ++ static void foreach_part_cb (GMimeObject * /*parent*/, GMimeObject *o, gpointer self) + { + static_cast<SaveArticlesFromNZB*>(self)->foreach_part (o); + } +@@ -591,7 +592,7 @@ + if (!tasks.empty()) + _queue.add_tasks (tasks, Queue::BOTTOM); + g_object_unref (mem_stream); +- g_object_unref (wrapper); ++// g_object_unref (wrapper); //SKG gmime 2.4 don't unref returned data wrapper + } + } + +@@ -601,7 +602,7 @@ + { + if (status == OK) { + GMimeMessage * message = _cache.get_message (_article.get_part_mids()); +- g_mime_message_foreach_part (message, foreach_part_cb, this); ++ g_mime_message_foreach (message, foreach_part_cb, this); + g_object_unref (message); + } + delete this; +@@ -1041,19 +1042,19 @@ + const char * cpch; + char * old_mid (g_strdup_printf ("<%s>", g_mime_message_get_message_id(message))); + GMimeMessage * new_message (g_mime_message_new (false)); +- g_mime_message_set_header (new_message, "Supersedes", old_mid); ++ g_mime_object_set_header ((GMimeObject *) new_message, "Supersedes", old_mid); + g_mime_message_set_sender (new_message, g_mime_message_get_sender (message)); + g_mime_message_set_subject (new_message, g_mime_message_get_subject (message)); +- g_mime_message_set_header (new_message, "Newsgroups", g_mime_message_get_header (message, "Newsgroups")); +- g_mime_message_set_header (new_message, "References", g_mime_message_get_header (message, "References")); ++ g_mime_object_set_header ((GMimeObject *) new_message, "Newsgroups", g_mime_object_get_header ((GMimeObject *) message, "Newsgroups")); ++ g_mime_object_set_header ((GMimeObject *) new_message, "References", g_mime_object_get_header ((GMimeObject *) message, "References")); + if ((cpch = g_mime_message_get_reply_to (message))) + g_mime_message_set_reply_to (new_message, cpch); +- if ((cpch = g_mime_message_get_header (message, "Followup-To"))) +- g_mime_message_set_header (new_message, "Followup-To", cpch); ++ if ((cpch = g_mime_object_get_header ((GMimeObject *) message, "Followup-To"))) ++ g_mime_object_set_header ((GMimeObject *) new_message, "Followup-To", cpch); + gboolean unused (false); +- char * body (g_mime_message_get_body (message, true, &unused)); ++ char * body (g_mime_message_get_body (message, &unused)); + GMimeStream * stream = g_mime_stream_mem_new_with_buffer (body, strlen(body)); +- GMimeDataWrapper * content_object = g_mime_data_wrapper_new_with_stream (stream, GMIME_PART_ENCODING_DEFAULT); ++ GMimeDataWrapper * content_object = g_mime_data_wrapper_new_with_stream (stream, GMIME_CONTENT_ENCODING_DEFAULT); + GMimePart * part = g_mime_part_new (); + g_mime_part_set_content_object (part, content_object); + g_mime_message_set_mime_part (new_message, GMIME_OBJECT(part)); +@@ -1111,11 +1112,11 @@ + char * cancel_message = g_strdup_printf ("cancel <%s>", g_mime_message_get_message_id(message)); + g_mime_message_set_sender (cancel, g_mime_message_get_sender (message)); + g_mime_message_set_subject (cancel, "Cancel"); +- g_mime_message_set_header (cancel, "Newsgroups", g_mime_message_get_header (message, "Newsgroups")); +- g_mime_message_set_header (cancel, "Control", cancel_message); ++ g_mime_object_set_header ((GMimeObject *) cancel, "Newsgroups", g_mime_object_get_header ((GMimeObject *) message, "Newsgroups")); ++ g_mime_object_set_header ((GMimeObject *) cancel, "Control", cancel_message); + const char * body ("Ignore\r\nArticle canceled by author using " PACKAGE_STRING "\r\n"); + GMimeStream * stream = g_mime_stream_mem_new_with_buffer (body, strlen(body)); +- GMimeDataWrapper * content_object = g_mime_data_wrapper_new_with_stream (stream, GMIME_PART_ENCODING_DEFAULT); ++ GMimeDataWrapper * content_object = g_mime_data_wrapper_new_with_stream (stream, GMIME_CONTENT_ENCODING_DEFAULT); + GMimePart * part = g_mime_part_new (); + g_mime_part_set_content_object (part, content_object); + g_mime_message_set_mime_part (cancel, GMIME_OBJECT(part)); +@@ -1194,12 +1195,12 @@ + newsgroups = group; + } + if (!newsgroups.empty()) +- g_mime_message_add_header (message, "Newsgroups", newsgroups.c_str()); ++ g_mime_object_append_header ((GMimeObject *) message, "Newsgroups", newsgroups.c_str()); + + // content type + GMimePart * part = g_mime_part_new (); +- g_mime_part_set_content_type (part, g_mime_content_type_new_from_string ("text/plain; charset=UTF-8")); +- g_mime_part_set_encoding (part, GMIME_PART_ENCODING_8BIT); ++ g_mime_object_set_content_type ((GMimeObject *) part, g_mime_content_type_new_from_string ("text/plain; charset=UTF-8")); ++ g_mime_part_set_content_encoding (part, GMIME_CONTENT_ENCODING_8BIT); + g_mime_message_set_mime_part (message, GMIME_OBJECT(part)); + g_object_unref (part); + +@@ -1754,8 +1755,8 @@ + g_snprintf (str, sizeof(str), "%s: %u/%u", _("Tasks"), running, size); + + // build the tooltip +- gulong queued, unused, stopped; +- guint64 KiB_remain; ++ long unsigned int queued, unused, stopped; //SKG MacPorts can't find function ++ uint64_t KiB_remain; //SKG using gulong and guint64 types. + double KiBps; + int hr, min, sec; + _queue.get_stats (queued, unused, stopped, +diff -ru pan-0.133.orig/pan/gui/pan.cc pan-0.133/pan/gui/pan.cc +--- pan-0.133.orig/pan/gui/pan.cc 2008-07-04 11:30:29.000000000 -0700 ++++ pan-0.133/pan/gui/pan.cc 2009-09-12 13:39:13.000000000 -0700 +@@ -211,7 +211,7 @@ + textdomain (GETTEXT_PACKAGE); + + g_thread_init (0); +- g_mime_init (GMIME_INIT_FLAG_UTF8); ++ g_mime_init (GMIME_ENABLE_RFC2047_WORKAROUNDS); + + bool gui(true), nzb(false); + std::string url; +diff -ru pan-0.133.orig/pan/gui/post-ui.cc pan-0.133/pan/gui/post-ui.cc +--- pan-0.133.orig/pan/gui/post-ui.cc 2008-07-13 06:32:11.000000000 -0700 ++++ pan-0.133/pan/gui/post-ui.cc 2009-09-12 13:04:51.000000000 -0700 +@@ -529,8 +529,8 @@ + { + std::string url, to, groups; + gboolean unused; +- char * headers (g_mime_message_get_headers (message)); +- char * body (g_mime_message_get_body (message, true, &unused)); ++ char * headers (g_mime_object_get_headers ((GMimeObject *) message)); ++ char * body (g_mime_message_get_body (message, &unused)); + StringView key, val, v(headers); + v.trim (); + while (v.pop_token (val, '\n') && val.pop_token(key,':')) { +@@ -629,7 +629,7 @@ + *** If this is email only, skip the rest of the posting... + *** we only stayed this long to get check_message() + **/ +- const StringView groups (g_mime_message_get_header (message, "Newsgroups")); ++ const StringView groups (g_mime_object_get_header ((GMimeObject *) message, "Newsgroups")); + if (groups.empty()) { + maybe_mail_message (message); + return true; +@@ -903,9 +903,9 @@ + */ + void pan_g_mime_message_set_message_id (GMimeMessage *msg, const char *mid) + { +- g_mime_message_add_header (msg, "Message-ID", mid); ++ g_mime_object_append_header ((GMimeObject *) msg, "Message-ID", mid); + char * bracketed = g_strdup_printf ("<%s>", mid); +- g_mime_header_set (GMIME_OBJECT(msg)->headers, "Message-ID", bracketed); ++ g_mime_header_list_set (GMIME_OBJECT(msg)->headers, "Message-ID", bracketed); + g_free (bracketed); + } + } +@@ -928,27 +928,27 @@ + // headers from the ui: To + const StringView to (gtk_entry_get_text (GTK_ENTRY(_to_entry))); + if (!to.empty()) +- g_mime_message_add_recipients_from_string (msg, (char*)GMIME_RECIPIENT_TYPE_TO, to.str); ++ g_mime_message_add_recipients_from_string (msg, GMIME_RECIPIENT_TYPE_TO, to.str); + + // headers from the ui: Newsgroups + const StringView groups (gtk_entry_get_text (GTK_ENTRY(_groups_entry))); + if (!groups.empty()) +- g_mime_message_set_header (msg, "Newsgroups", groups.str); ++ g_mime_object_set_header ((GMimeObject *) msg, "Newsgroups", groups.str); + + // headers from the ui: Followup-To + const StringView followupto (gtk_entry_get_text (GTK_ENTRY(_followupto_entry))); + if (!followupto.empty()) +- g_mime_message_set_header (msg, "Followup-To", followupto.str); ++ g_mime_object_set_header ((GMimeObject *) msg, "Followup-To", followupto.str); + + // headers from the ui: Reply-To + const StringView replyto (gtk_entry_get_text (GTK_ENTRY(_replyto_entry))); + if (!replyto.empty()) +- g_mime_message_set_header (msg, "Reply-To", replyto.str); ++ g_mime_object_set_header ((GMimeObject *) msg, "Reply-To", replyto.str); + + // add the 'hidden headers' + foreach_const (str2str_t, _hidden_headers, it) + if ((mode==DRAFTING) || (it->first.find ("X-Draft-")!=0)) +- g_mime_message_set_header (msg, it->first.c_str(), it->second.c_str()); ++ g_mime_object_set_header ((GMimeObject *) msg, it->first.c_str(), it->second.c_str()); + + // build headers from the 'more headers' entry field + std::map<std::string,std::string> headers; +@@ -964,14 +964,14 @@ + val.trim (); + std::string key_str (key.to_string()); + if (extra_header_is_editable (key, val)) +- g_mime_message_set_header (msg, key.to_string().c_str(), +- val.to_string().c_str()); ++ g_mime_object_set_header ((GMimeObject *) msg, key.to_string().c_str(), ++ val.to_string().c_str()); + } + g_free (pch); + + // User-Agent + if (mode==POSTING && _prefs.get_flag (USER_AGENT_PREFS_KEY, true)) +- g_mime_message_set_header (msg, "User-Agent", get_user_agent()); ++ g_mime_object_set_header ((GMimeObject *) msg, "User-Agent", get_user_agent()); + + // Message-ID + if (mode==POSTING && _prefs.get_flag (MESSAGE_ID_PREFS_KEY, false)) { +@@ -987,22 +987,22 @@ + const std::string charset ((mode==POSTING && !_charset.empty()) ? _charset : "UTF-8"); + if (charset != "UTF-8") { + // add a wrapper to convert from UTF-8 to $charset +- GMimeStream * tmp = g_mime_stream_filter_new_with_stream (stream); ++ GMimeStream * tmp = g_mime_stream_filter_new (stream); + g_object_unref (stream); + GMimeFilter * filter = g_mime_filter_charset_new ("UTF-8", charset.c_str()); + g_mime_stream_filter_add (GMIME_STREAM_FILTER(tmp), filter); + g_object_unref (filter); + stream = tmp; + } +- GMimeDataWrapper * content_object = g_mime_data_wrapper_new_with_stream (stream, GMIME_PART_ENCODING_DEFAULT); ++ GMimeDataWrapper * content_object = g_mime_data_wrapper_new_with_stream (stream, GMIME_CONTENT_ENCODING_DEFAULT); + g_object_unref (stream); + GMimePart * part = g_mime_part_new (); + pch = g_strdup_printf ("text/plain; charset=%s", charset.c_str()); + GMimeContentType * type = g_mime_content_type_new_from_string (pch); + g_free (pch); +- g_mime_part_set_content_type (part, type); // part owns type now. type isn't refcounted. ++ g_mime_object_set_content_type ((GMimeObject *) part, type); // part owns type now. type isn't refcounted. + g_mime_part_set_content_object (part, content_object); +- g_mime_part_set_encoding (part, GMIME_PART_ENCODING_8BIT); ++ g_mime_part_set_content_encoding (part, GMIME_CONTENT_ENCODING_8BIT); + g_object_unref (content_object); + g_mime_message_set_mime_part (msg, GMIME_OBJECT(part)); + g_object_unref (part); +@@ -1036,7 +1036,7 @@ + + errno = 0; + std::ofstream o (filename); +- char * pch = g_mime_message_to_string (msg); ++ char * pch = g_mime_object_to_string ((GMimeObject *) msg); + o << pch; + o.close (); + +@@ -1504,16 +1504,16 @@ + std::string s = utf8ize (g_mime_message_get_subject (message)); + gtk_entry_set_text (GTK_ENTRY(_subject_entry), s.c_str()); + +- s = utf8ize (g_mime_message_get_header (message, "Newsgroups")); ++ s = utf8ize (g_mime_object_get_header ((GMimeObject *) message, "Newsgroups")); + gtk_entry_set_text (GTK_ENTRY(_groups_entry), s.c_str()); + +- s = utf8ize (g_mime_message_get_header (message, "Followup-To")); ++ s = utf8ize (g_mime_object_get_header ((GMimeObject *) message, "Followup-To")); + gtk_entry_set_text (GTK_ENTRY(_followupto_entry), s.c_str()); + +- s = utf8ize (g_mime_message_get_header (message, "Reply-To")); ++ s = utf8ize (g_mime_object_get_header ((GMimeObject *) message, "Reply-To")); + gtk_entry_set_text (GTK_ENTRY(_replyto_entry), s.c_str()); + +- const InternetAddressList * addresses = g_mime_message_get_recipients (message, GMIME_RECIPIENT_TYPE_TO); ++ InternetAddressList * addresses = g_mime_message_get_recipients (message, GMIME_RECIPIENT_TYPE_TO); + char * pch = internet_address_list_to_string (addresses, true); + s = utf8ize (pch); + gtk_entry_set_text (GTK_ENTRY(_to_entry), s.c_str()); +@@ -1521,16 +1521,34 @@ + + // update 'other headers' + SetMessageForeachHeaderData data; +- if (message->mime_part && g_mime_header_has_raw (message->mime_part->headers)) +- g_mime_header_foreach (message->mime_part->headers, set_message_foreach_header_func, &data); +- g_mime_header_foreach (GMIME_OBJECT(message)->headers, set_message_foreach_header_func, &data); ++ const char *name, *value; ++ GMimeHeaderIter iter; ++ ++ if (message->mime_part && g_mime_header_list_has_raw (message->mime_part->headers)) { ++ if (g_mime_header_list_get_iter (message->mime_part->headers, &iter)) { ++ do { ++ value = g_mime_header_iter_get_value (&iter); ++ name = g_mime_header_iter_get_name (&iter); ++ set_message_foreach_header_func (name, value, &data); ++ } while (g_mime_header_iter_next (&iter)); ++ } ++ } ++ ++ if (g_mime_header_list_get_iter (GMIME_OBJECT (message)->headers, &iter)) { ++ do { ++ value = g_mime_header_iter_get_value (&iter); ++ name = g_mime_header_iter_get_name (&iter); ++ set_message_foreach_header_func (name, value, &data); ++ } while (g_mime_header_iter_next (&iter)); ++ } ++ + s = utf8ize (data.visible_headers); + gtk_text_buffer_set_text (_headers_buf, s.c_str(), -1); + _hidden_headers = data.hidden_headers; + + // update body + int ignored; +- char * tmp = g_mime_message_get_body (message, true, &ignored); ++ char * tmp = g_mime_message_get_body (message, &ignored); + s = utf8ize (tmp); + g_free (tmp); + if (!s.empty()) { +diff -ru pan-0.133.orig/pan/usenet-utils/message-check-test.cc pan-0.133/pan/usenet-utils/message-check-test.cc +--- pan-0.133.orig/pan/usenet-utils/message-check-test.cc 2007-08-01 09:59:59.000000000 -0700 ++++ pan-0.133/pan/usenet-utils/message-check-test.cc 2009-09-12 13:41:22.000000000 -0700 +@@ -22,6 +22,20 @@ + std::cerr << LINE_ID << " [" << i << "][" << *it << ']' << std::endl; \ + } + ++static void ++mime_part_set_content (GMimePart *part, const char *str) ++{ ++ GMimeDataWrapper *content; ++ GMimeStream *stream; ++ ++ stream = g_mime_stream_mem_new_with_buffer (str, strlen (str)); ++ content = g_mime_data_wrapper_new_with_stream (stream, GMIME_CONTENT_ENCODING_DEFAULT); ++ g_object_unref (stream); ++ ++ g_mime_part_set_content_object (part, content); ++ g_object_unref (content); ++} ++ + int main (void) + { + g_mime_init (0); +@@ -41,11 +55,11 @@ + std::string message_id = GNKSA :: generate_message_id ("rebelbase.com"); + g_mime_message_set_message_id (msg, message_id.c_str()); + g_mime_message_set_subject (msg, "MAKE MONEY FAST"); +- g_mime_message_set_header (msg, "Organization", "Lazars Android Works"); +- g_mime_message_set_header (msg, "Newsgroups", "alt.test"); ++ g_mime_object_set_header ((GMimeObject *) msg, "Organization", "Lazars Android Works"); ++ g_mime_object_set_header ((GMimeObject *) msg, "Newsgroups", "alt.test"); + GMimePart * part = g_mime_part_new_with_type ("text", "plain"); + const char * cpch = "Hello World!"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + g_mime_message_set_mime_part (msg, GMIME_OBJECT(part)); + // this should pass the tests + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); +@@ -54,7 +68,7 @@ + + // all quoted + cpch = "> Hello World!\n> All quoted text."; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + std::vector<std::string> e (errors.begin(), errors.end()); + check (errors.size() == 2) +@@ -64,7 +78,7 @@ + + // mostly quoted + cpch = "> Hello World!\n> quoted\n> text\n> foo\n> bar\nnew text"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -73,14 +87,14 @@ + + // mostly quoted border condition: 20% of message is new content (should pass) + cpch = "> Hello World!\n> quoted\n> text\n> foo\nnew text"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + check (errors.empty()) + check (goodness.is_ok()) + + // sig check: too long + cpch = "Hello!\n\n-- \nThis\nSig\nIs\nToo\nLong\n"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -95,7 +109,7 @@ + "This sig line is greater than 80 characters wide. In fact, it's 84 characters wide.\n" + "This sig line is greater than 80 characters wide. In fact, it measures 95 characters in width!\n" + "This sig line is less than 80 characters wide."; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -104,7 +118,7 @@ + + // sig check: sig marker, no sig + cpch = "Hello!\n\n-- \n"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -113,7 +127,7 @@ + + // sig check: okay sig + cpch = "Hello!\n\n-- \nThis is a short, narrow sig.\nIt should pass.\n"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + check (errors.empty()) + check (goodness.is_ok()) +@@ -146,7 +160,7 @@ + "This sig line is greater than 80 characters wide. In fact, it's 84 characters wide.\n" + "This sig line is greater than 80 characters wide. In fact, it measures 95 characters in width!\n" + "This sig line is less than 80 characters wide."; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -155,7 +169,7 @@ + + // body empty + cpch = "\n\t\n \n-- \nThis is the sig."; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 2) +@@ -163,7 +177,7 @@ + check (e[0] == "Error: Message appears to have no new content."); + check (e[1] == "Error: Message is empty."); + cpch = "Some valid message."; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + + // empty subject + g_mime_message_set_subject (msg, ""); +@@ -175,17 +189,17 @@ + g_mime_message_set_subject (msg, "Happy Lucky Feeling"); + + // newsgroups +- g_mime_message_set_header (msg, "Newsgroups", "alt.test,unknown.group"); ++ g_mime_object_set_header ((GMimeObject *) msg, "Newsgroups", "alt.test,unknown.group"); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) + check (goodness.is_warn()) + check (e[0] == "Warning: The posting profile's server doesn't carry newsgroup\n\t\"unknown.group\".\n\tIf the group name is correct, switch profiles in the \"From:\"\n\tline or edit the profile with \"Edit|Manage Posting Profiles\".") +- g_mime_message_set_header (msg, "Newsgroups", "alt.test"); ++ g_mime_object_set_header ((GMimeObject *) msg, "Newsgroups", "alt.test"); + + // newsgroups w/o followup +- g_mime_message_set_header (msg, "Newsgroups", "alt.test,alt.religion.kibology,alt.binaries.sounds.mp3.indie"); +- g_mime_header_remove (GMIME_OBJECT(msg)->headers, "Followup-To"); ++ g_mime_object_set_header ((GMimeObject *) msg, "Newsgroups", "alt.test,alt.religion.kibology,alt.binaries.sounds.mp3.indie"); ++ g_mime_header_list_remove (GMIME_OBJECT(msg)->headers, "Followup-To"); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -193,8 +207,8 @@ + check (e[0] == "Warning: Crossposting without setting Followup-To header.") + + // unknown follow-up +- g_mime_message_set_header (msg, "Newsgroups", "alt.test"); +- g_mime_message_set_header (msg, "Followup-To", "alt.test,unknown.group"); ++ g_mime_object_set_header ((GMimeObject *) msg, "Newsgroups", "alt.test"); ++ g_mime_object_set_header ((GMimeObject *) msg, "Followup-To", "alt.test,unknown.group"); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -203,11 +217,11 @@ + g_mime_object_remove_header (GMIME_OBJECT(msg), "Followup-To"); + + // top posting +- g_mime_message_set_header (msg, "References", "<asdf@foo.com>"); ++ g_mime_object_set_header ((GMimeObject *) msg, "References", "<asdf@foo.com>"); + cpch = "How Fascinating!\n" + "\n" + "> Blah blah blah.\n"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -216,7 +230,7 @@ + g_mime_object_remove_header (GMIME_OBJECT(msg), "References"); + + // top posting +- g_mime_message_set_header (msg, "References", "<asdf@foo.com>"); ++ g_mime_object_set_header ((GMimeObject *) msg, "References", "<asdf@foo.com>"); + cpch = "How Fascinating!\n" + "\n" + "> Blah blah blah.\n" +@@ -224,7 +238,7 @@ + "-- \n" + "Pan shouldn't mistake this signature for\n" + "original content in the top-posting check.\n"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +@@ -238,7 +252,7 @@ + "\n" + "--\n" + "This is my signature.\n"; +- g_mime_part_set_content (part, cpch, strlen(cpch)); ++ mime_part_set_content (part, cpch); + MessageCheck :: message_check (msg, attribution, groups_our_server_has, errors, goodness); + e.assign (errors.begin(), errors.end()); + check (errors.size() == 1) +diff -ru pan-0.133.orig/pan/usenet-utils/message-check.cc pan-0.133/pan/usenet-utils/message-check.cc +--- pan-0.133.orig/pan/usenet-utils/message-check.cc 2008-07-04 23:15:22.000000000 -0700 ++++ pan-0.133/pan/usenet-utils/message-check.cc 2009-09-12 13:42:37.000000000 -0700 +@@ -30,6 +30,7 @@ + #include "gnksa.h" + #include "message-check.h" + #include "text-massager.h" ++#include "mime-utils.h" + + using namespace pan; + +@@ -62,7 +63,7 @@ + std::string body (body_in.to_string()); + + // strip attribution +- const char * attribution = g_mime_message_get_header (message, PAN_ATTRIBUTION); ++ const char * attribution = g_mime_object_get_header ((GMimeObject *) message, PAN_ATTRIBUTION); + if (attribution && *attribution) + { + std::string::size_type attrib_start_pos = body.find (attribution); +@@ -99,7 +100,7 @@ + GMimeMessage * message) + { + // if it's not a reply, then top-posting check is moot +- if (g_mime_message_get_header (message, "References") == NULL) ++ if (g_mime_object_get_header ((GMimeObject *) message, "References") == NULL) + return; + + bool quoted_found (false); +@@ -414,7 +415,6 @@ + } + } + +- + void + MessageCheck :: message_check (const GMimeMessage * message_const, + const StringView & attribution, +@@ -432,7 +432,7 @@ + check_subject (errors, goodness, g_mime_message_get_subject (message)); + + // check the author... +- if (GNKSA::check_from (g_mime_message_get_header (message, "From"), true)) { ++ if (GNKSA::check_from (g_mime_object_get_header ((GMimeObject *) message, "From"), true)) { + errors.insert (_("Error: Bad email address.")); + goodness.raise_to_warn (); + } +@@ -440,17 +440,17 @@ + // check the body... + TextMassager tm; + gboolean is_html; +- char * body = g_mime_message_get_body (message, true, &is_html); ++ char * body = g_mime_message_get_body (message, &is_html); + if (is_html) { + errors.insert (_("Warning: Most newsgroups frown upon HTML posts.")); + goodness.raise_to_warn (); + } + check_body (errors, goodness, tm, message, body, attribution); + g_free (body); +- ++ + // check the optional followup-to... + bool followup_to_set (false); +- const char * cpch = g_mime_message_get_header (message, "Followup-To"); ++ const char * cpch = g_mime_object_get_header ((GMimeObject *) message, "Followup-To"); + if (cpch && *cpch) { + quarks_t groups; + get_nntp_rcpts (cpch, groups); +@@ -460,7 +460,7 @@ + + // check the groups... + size_t group_qty (0); +- cpch = g_mime_message_get_header (message, "Newsgroups"); ++ cpch = g_mime_object_get_header ((GMimeObject *) message, "Newsgroups"); + if (cpch && *cpch) { + quarks_t groups; + get_nntp_rcpts (cpch, groups); +@@ -469,7 +469,7 @@ + } + + // one last error check +- const InternetAddressList * list (g_mime_message_get_recipients (message, GMIME_RECIPIENT_TYPE_TO)); ++ InternetAddressList * list (g_mime_message_get_recipients (message, GMIME_RECIPIENT_TYPE_TO)); + const int n_to (internet_address_list_length (list)); + if (!group_qty && !n_to) { + errors.insert (_("Error: No Recipients.")); +diff -ru pan-0.133.orig/pan/usenet-utils/mime-utils.cc pan-0.133/pan/usenet-utils/mime-utils.cc +--- pan-0.133.orig/pan/usenet-utils/mime-utils.cc 2008-07-04 23:15:24.000000000 -0700 ++++ pan-0.133/pan/usenet-utils/mime-utils.cc 2009-09-12 14:46:25.000000000 -0700 +@@ -455,10 +455,10 @@ + part->stream = g_mime_stream_mem_new (); + if (part->type != ENC_PLAIN) { + part->filter_stream = +- g_mime_stream_filter_new_with_stream (part->stream); ++ g_mime_stream_filter_new (part->stream); + part->filter = part->type == ENC_UU +- ? g_mime_filter_basic_new_type (GMIME_FILTER_BASIC_UU_DEC) +- : g_mime_filter_yenc_new (GMIME_FILTER_YENC_DIRECTION_DECODE); ++ ? g_mime_filter_basic_new (GMIME_CONTENT_ENCODING_UUENCODE, FALSE) ++ : g_mime_filter_yenc_new (FALSE); + g_mime_stream_filter_add (GMIME_STREAM_FILTER(part->filter_stream), + part->filter); + } +@@ -722,18 +722,21 @@ + { + // if the part is a multipart, check its subparts + if (GMIME_IS_MULTIPART (*part)) { +- GList * subparts = GMIME_MULTIPART (*part)->subparts; +- while (subparts) { +- GMimeObject * subpart = (GMimeObject *) subparts->data; ++ GMimeMultipart *multipart = (GMimeMultipart *) *part; ++ int count = g_mime_multipart_get_count(multipart); ++ int i; ++ ++ for (i = 0; i < count; i++) { ++ GMimeObject * subpart = g_mime_multipart_remove_at (multipart, i); + handle_uu_and_yenc_in_text_plain (&subpart); +- subparts->data = subpart; +- subparts = subparts->next; ++ g_mime_multipart_insert (multipart, i, subpart); ++ g_object_unref (subpart); + } + return; + } + + // we assume that inlined yenc and uu are only in text/plain blocks +- const GMimeContentType * content_type = g_mime_object_get_content_type (*part); ++ GMimeContentType * content_type = g_mime_object_get_content_type (*part); + if (!g_mime_content_type_is_type (content_type, "text", "plain")) + return; + +@@ -746,8 +749,8 @@ + GMimeStream * stream = g_mime_data_wrapper_get_stream (content); + g_mime_stream_reset (stream); + GMimeStream * istream = g_mime_stream_buffer_new (stream, GMIME_STREAM_BUFFER_BLOCK_READ); +- g_object_unref (stream); +- g_object_unref (content); ++// g_object_unref (stream); //SKG if this is unrefed, when istream is unrefed below, content loses its stream ++// g_object_unref (content); //SKG gmime 2.4 don't unref returned data wrapper + + // break it into separate parts for text, uu, and yenc pieces. + temp_parts_t parts; +@@ -774,22 +777,22 @@ + g_mime_part_set_filename (subpart, filename); + + GMimeStream * subpart_stream = tmp_part->stream; +- content = g_mime_data_wrapper_new_with_stream (subpart_stream, GMIME_PART_ENCODING_DEFAULT); ++ content = g_mime_data_wrapper_new_with_stream (subpart_stream, GMIME_CONTENT_ENCODING_DEFAULT); + g_mime_part_set_content_object (subpart, content); +- g_mime_multipart_add_part (GMIME_MULTIPART (multipart), GMIME_OBJECT (subpart)); ++ g_mime_multipart_add (GMIME_MULTIPART (multipart), GMIME_OBJECT (subpart)); + + g_object_unref (content); + g_object_unref (subpart); + } + + // replace the old part with the new multipart +- g_mime_object_unref (*part); ++ g_object_unref (*part); + *part = GMIME_OBJECT (multipart); + } + + foreach (temp_parts_t, parts, it) + delete *it; +- g_mime_stream_unref (istream); ++ g_object_unref (istream); + } + } + +@@ -831,15 +834,15 @@ + GMimeStream * stream = g_mime_data_wrapper_get_stream (wrapper); + g_mime_stream_reset (stream); + g_mime_stream_cat_add_source (GMIME_STREAM_CAT (cat), stream); +- g_object_unref (stream); +- g_object_unref (wrapper); ++// g_object_unref (stream); //SKG if this is unrefed cat loses its stream ++// g_object_unref (wrapper); //SKG gmime 2.4 don't unref returned data wrapper + } + + GMimeMessage * message = messages[0]; + GMimeDataWrapper * wrapper = g_mime_part_get_content_object (GMIME_PART(message->mime_part)); + g_mime_stream_reset (cat); + g_mime_data_wrapper_set_stream (wrapper, cat); +- g_object_unref (wrapper); ++// g_object_unref (wrapper); //SKG gmime 2.4 don't unref returned data wrapper + g_object_unref (cat); + } + +@@ -1007,3 +1010,174 @@ + { + normalize_subject (subject, STRIP_MULTIPART_NUMERATOR, setme); + } ++ ++static GMimeObject * ++handle_multipart_mixed (GMimeMultipart *multipart, gboolean *is_html); ++ ++static GMimeObject * ++handle_multipart_alternative (GMimeMultipart *multipart, gboolean *is_html) ++{ ++ GMimeObject *mime_part, *text_part = NULL; ++ GMimeContentType *type; ++ int count = g_mime_multipart_get_count (multipart); ++ ++ for (int i = 0; i < count; ++i) { ++ mime_part = g_mime_multipart_get_part (multipart, i); ++ ++ type = g_mime_object_get_content_type (mime_part); ++ if (g_mime_content_type_is_type (type, "text", "*")) { ++ if (!text_part || !g_ascii_strcasecmp (type->subtype, "plain")) { ++ *is_html = !g_ascii_strcasecmp (type->subtype, "html"); ++ text_part = mime_part; ++ } ++ } ++ } ++ ++ return text_part; ++} ++ ++static GMimeObject * ++handle_multipart_mixed (GMimeMultipart *multipart, gboolean *is_html) ++{ ++ GMimeObject *mime_part, *text_part = NULL; ++ GMimeContentType *type, *first_type = NULL; ++ int count = g_mime_multipart_get_count (multipart); ++ ++ for (int i = 0; i < count; ++i) { ++ mime_part = g_mime_multipart_get_part (multipart, i); ++ ++ type = g_mime_object_get_content_type (mime_part); ++ if (GMIME_IS_MULTIPART (mime_part)) { ++ multipart = GMIME_MULTIPART (mime_part); ++ if (g_mime_content_type_is_type (type, "multipart", "alternative")) { ++ mime_part = handle_multipart_alternative (multipart, is_html); ++ if (mime_part) ++ return mime_part; ++ } else { ++ mime_part = handle_multipart_mixed (multipart, is_html); ++ if (mime_part && !text_part) ++ text_part = mime_part; ++ } ++ } else if (g_mime_content_type_is_type (type, "text", "*")) { ++ if (!g_ascii_strcasecmp (type->subtype, "plain")) { ++ /* we got what we came for */ ++ *is_html = !g_ascii_strcasecmp (type->subtype, "html"); ++ return mime_part; ++ } ++ ++ /* if we haven't yet found a text part or if it is a type we can ++ * * understand and it is the first of that type, save it */ ++ if (!text_part || (!g_ascii_strcasecmp (type->subtype, "plain") && (first_type && ++ g_ascii_strcasecmp (type->subtype, first_type->subtype) != 0))) { ++ *is_html = !g_ascii_strcasecmp (type->subtype, "html"); ++ text_part = mime_part; ++ first_type = type; ++ } ++ } ++ } ++ ++ return text_part; ++} ++ ++#define NEEDS_DECODING(encoding) ((encoding == GMIME_CONTENT_ENCODING_BASE64) || \ ++ (encoding == GMIME_CONTENT_ENCODING_UUENCODE) || \ ++ (encoding == GMIME_CONTENT_ENCODING_QUOTEDPRINTABLE)) ++ ++static const char * ++g_mime_part_get_content (const GMimePart *mime_part, size_t *len) ++{ ++ const char *retval = NULL; ++ GMimeStream *stream; ++ ++ g_return_val_if_fail (GMIME_IS_PART (mime_part), NULL); ++ ++ if (!mime_part->content || !mime_part->content->stream) { ++ g_warning ("no content set on this mime part"); ++ return NULL; ++ } ++ ++ stream = mime_part->content->stream; ++ if (!GMIME_IS_STREAM_MEM (stream) || NEEDS_DECODING (mime_part->content->encoding)) { ++ /* Decode and cache this mime part's contents... */ ++ GMimeStream *cache; ++ GByteArray *buf; ++ ++ buf = g_byte_array_new (); ++ cache = g_mime_stream_mem_new_with_byte_array (buf); ++ ++ g_mime_data_wrapper_write_to_stream (mime_part->content, cache); ++ ++ g_mime_data_wrapper_set_stream (mime_part->content, cache); ++ g_mime_data_wrapper_set_encoding (mime_part->content, GMIME_CONTENT_ENCODING_DEFAULT); ++ g_object_unref (cache); ++ ++ *len = buf->len; ++ retval = (char *) buf->data; ++ } else { ++ GByteArray *buf = GMIME_STREAM_MEM (stream)->buffer; ++ off_t end_index = (off_t) buf->len; ++ off_t start_index = 0; ++ ++ /* check boundaries */ ++ if (stream->bound_start >= 0) ++ start_index = CLAMP (stream->bound_start, 0, (off_t) buf->len); ++ if (stream->bound_end >= 0) ++ end_index = CLAMP (stream->bound_end, 0, (off_t) buf->len); ++ if (end_index < start_index) ++ end_index = start_index; ++ ++ *len = end_index - start_index; ++ retval = (char *) buf->data + start_index; ++ } ++ ++ return retval; ++} ++ ++char *g_mime_message_get_body (GMimeMessage *message, gboolean *is_html) ++{ ++ GMimeObject *mime_part = NULL; ++ GMimeContentType *type; ++ GMimeMultipart *multipart; ++ const char *content; ++ char *body = NULL; ++ size_t len = 0; ++ ++ g_return_val_if_fail (GMIME_IS_MESSAGE (message), NULL); ++ g_return_val_if_fail (is_html != NULL, NULL); ++ ++ type = g_mime_object_get_content_type (message->mime_part); ++ if (GMIME_IS_MULTIPART (message->mime_part)) { ++ /* let's see if we can find a body in the multipart */ ++ multipart = GMIME_MULTIPART (message->mime_part); ++ if (g_mime_content_type_is_type (type, "multipart", "alternative")) ++ mime_part = handle_multipart_alternative (multipart, is_html); ++ else ++ mime_part = handle_multipart_mixed (multipart, is_html); ++ } else if (g_mime_content_type_is_type (type, "text", "*")) { ++ /* this *has* to be the message body */ ++ if (g_mime_content_type_is_type (type, "text", "html")) ++ *is_html = TRUE; ++ else ++ *is_html = FALSE; ++ mime_part = message->mime_part; ++ } ++ ++ if (mime_part != NULL) { ++ content = g_mime_part_get_content (GMIME_PART (mime_part), &len); ++ body = g_strndup (content, len); ++ } ++ ++ return body; ++} ++ ++void g_mime_message_add_recipients_from_string (GMimeMessage *message, GMimeRecipientType type, const char *string) ++{ ++ InternetAddressList *addrlist; ++ if ((addrlist = internet_address_list_parse_string (string))) { ++ for (int i = 0; i < internet_address_list_length (addrlist); ++i) { ++ InternetAddress *ia = internet_address_list_get_address (addrlist, i); ++ if (INTERNET_ADDRESS_IS_MAILBOX(ia)) ++ g_mime_message_add_recipient (message, type, internet_address_get_name(ia), internet_address_mailbox_get_addr(INTERNET_ADDRESS_MAILBOX(ia))); ++ } ++ } ++} +diff -ru pan-0.133.orig/pan/usenet-utils/mime-utils.h pan-0.133/pan/usenet-utils/mime-utils.h +--- pan-0.133.orig/pan/usenet-utils/mime-utils.h 2007-08-01 09:59:59.000000000 -0700 ++++ pan-0.133/pan/usenet-utils/mime-utils.h 2009-09-12 13:20:11.000000000 -0700 +@@ -64,4 +64,8 @@ + }; + } + ++char *g_mime_message_get_body (GMimeMessage *message, gboolean *is_html); ++void g_mime_message_add_recipients_from_string (GMimeMessage *message, GMimeRecipientType type, const char *string); ++ ++ + #endif +diff -ru pan-0.133.orig/pan.spec pan-0.133/pan.spec +--- pan-0.133.orig/pan.spec 2008-07-29 19:05:05.000000000 -0700 ++++ pan-0.133/pan.spec 2009-09-12 14:58:20.000000000 -0700 +@@ -15,14 +15,14 @@ + + BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot + BuildRequires: glib2-devel >= 2.4.0 +-BuildRequires: gmime-devel >= 2.1.9 ++BuildRequires: gmime-devel >= 2.3.5 + BuildRequires: gtk2-devel >= 2.4.0 + BuildRequires: pcre-devel >= 5.0 + %{!?_without_gtkspell:BuildRequires: gtkspell-devel >= 2.0.7} + + Requires: pcre >= 5.0 + Requires: glib2 >= 2.4.0 +-Requires: gmime >= 2.1.9 ++Requires: gmime >= 2.3.5 + Requires: gtk2 >= 2.4.0 + %{!?_without_gtkspell:Requires: gtkspell >= 2.0.7} + diff --git a/source/xap/pidgin/pidgin.SlackBuild b/source/xap/pidgin/pidgin.SlackBuild index fb7def08f..d61713b60 100755 --- a/source/xap/pidgin/pidgin.SlackBuild +++ b/source/xap/pidgin/pidgin.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,21 @@ PKGNAM=pidgin -VERSION=${VERSION:-2.5.9} -PIDGINENC=${PIDGINENC:-3.0} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-2.7.0} +PIDGINENC=${PIDGINENC:-3.1} BUILD=${BUILD:-1} -NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j6 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -38,18 +47,23 @@ mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" + ARCHQUADLET="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="" + ARCHQUADLET="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" + ARCHQUADLET="" elif [ "$ARCH" = "arm" ]; then - SLKCFLAGS="-O2 -march=armv4 -mtune=xscale" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" LIBDIRSUFFIX="" + ARCHQUADLET="-gnueabi" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + ARCHQUADLET="" fi cd $TMP @@ -80,15 +94,19 @@ CXXFLAGS="$SLKCFLAGS" \ --enable-dbus \ --enable-gnutls=yes \ --enable-nss=no \ + --disable-vv \ --enable-gtkspell \ --enable-cyrus-sasl \ - --with-perl-lib=vendor \ + --enable-perl \ --disable-meanwhile \ --disable-avahi \ --disable-nm \ --program-prefix= \ --program-suffix= \ - --build=$ARCH-slackware-linux + --build=$ARCH-slackware-linux$ARCHQUADLET || exit 1 + +# Fix install location: +grep -lr -- "lib/perl" . | xargs sed -i 's?lib/perl?lib'"$LIBDIRSUFFIX"'/perl?g' # Build and install: make $NUMJOBS || make || exit 1 @@ -99,11 +117,21 @@ eval $(perl '-V:archlib') eval $(perl '-V:privlib') VENDORPERL="$(echo $archlib | sed -e "s/perl5/perl5\/vendor_perl/")" -find $PKG -type f -name perllocal.pod -exec mv {} $PKG/$VENDORPERL/Pidgin.pod \; +mkdir -vpm755 $PKG/$VENDORPERL/ +find $PKG -type f -name perllocal.pod -exec mv -fv {} $PKG/$VENDORPERL/Pidgin.pod \; +# Fix install location for 64bit: +sed -i 's?/lib/perl?/lib'"$LIBDIRSUFFIX"'/perl?g' $PKG/$VENDORPERL/Pidgin.pod mkdir -p $PKG/usr/man/man3 -find $PKG/usr/share/man -type f -name *.3 -exec mv {} $PKG/usr/man/man3 \; +find $PKG/usr/share/man -type f -name *.3 -exec mv -fv {} $PKG/usr/man/man3 \; rm -rf $PKG/usr/share/man rm -r $PKG$privlib +# This is empty: +rmdir $PKG/usr/lib$LIBDIRSUFFIX/perl[0-9]*/$ARCH-linux-thread-multi/ + +# In case of unwanted junk dirs on 64-bit... this may fail, but doesn't hurt: +rmdir $PKG/usr/lib/perl[0-9]*/$ARCH-linux-thread-multi/ +rmdir $PKG/usr/lib/perl[0-9]* +rmdir $PKG/usr/lib # This removes our DESTDIR from the packlist filenames, to keep perl's # internal inventories consistent and correct. @@ -142,7 +170,11 @@ done --with-nspr-libs=/usr/lib${LIBDIRSUFFIX}/seamonkey/ \ --program-prefix="" \ --program-suffix="" \ - --build=$ARCH-slackware-linux + --build=$ARCH-slackware-linux$ARCHQUADLET || exit 1 + + # Fix install location: + grep -lr -- "lib/perl" . | xargs sed -i 's?lib/perl?lib'"$LIBDIRSUFFIX"'/perl?g' + make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 ) || exit 1 diff --git a/source/xap/sane/sane-frontends-1.0.14-sane_cap_always_settable.diff b/source/xap/sane/sane-frontends-1.0.14-sane_cap_always_settable.diff new file mode 100644 index 000000000..98f2715ac --- /dev/null +++ b/source/xap/sane/sane-frontends-1.0.14-sane_cap_always_settable.diff @@ -0,0 +1,11 @@ +diff -Nur sane-backends-1.0.20.orig/include/sane/sane.h sane-backends-1.0.20/include/sane/sane.h +--- sane-backends-1.0.20.orig/include/sane/sane.h 2009-04-23 14:59:23.000000000 -0500 ++++ sane-backends-1.0.20/include/sane/sane.h 2010-01-19 18:24:29.954762582 -0600 +@@ -115,6 +115,7 @@ + #define SANE_CAP_AUTOMATIC (1 << 4) + #define SANE_CAP_INACTIVE (1 << 5) + #define SANE_CAP_ADVANCED (1 << 6) ++#define SANE_CAP_ALWAYS_SETTABLE (1 << 7) + + #define SANE_OPTION_IS_ACTIVE(cap) (((cap) & SANE_CAP_INACTIVE) == 0) + #define SANE_OPTION_IS_SETTABLE(cap) (((cap) & SANE_CAP_SOFT_SELECT) != 0) diff --git a/source/xap/sane/sane.SlackBuild b/source/xap/sane/sane.SlackBuild index 2d82f09e0..95daed9de 100755 --- a/source/xap/sane/sane.SlackBuild +++ b/source/xap/sane/sane.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.0.19 -BACKVER=1.0.19 +VERSION=1.0.21 +BACKVER=1.0.21 FRONTVER=1.0.14 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -52,6 +64,11 @@ rm -rf sane-backends-$BACKVER tar xvf $CWD/sane-backends-$BACKVER.tar.bz2 || exit 1 cd sane-backends-$BACKVER chown -R root:root . + +# Put the SANE_CAP_ALWAYS_SETTABLE definition back until +# everything else catches up with the API change... +zcat $CWD/sane-frontends-1.0.14-sane_cap_always_settable.diff.gz | patch -p1 || exit 1 + CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ @@ -69,11 +86,10 @@ make $NUMJOBS || make || exit 1 make install || exit 1 make install DESTDIR=$PKG || exit 1 -# Add the default udev rules, and until it's handled upstream, -# fix their syntax work with recent versions of udev +# Add the default udev rules mkdir -p $PKG/lib/udev/rules.d -sed s/SYSFS/ATTRS/g tools/udev/libsane.rules \ - > $PKG/lib/udev/rules.d/80-libsane.rules +cat tools/udev/libsane.rules > $PKG/lib/udev/rules.d/80-libsane.rules + # Add the hal fdi file mkdir -p $PKG/usr/share/hal/fdi/policy/10osvendor/ cat tools/hal/libsane.fdi \ @@ -85,6 +101,7 @@ rm -rf sane-frontends-$FRONTVER tar xvf $CWD/sane-frontends-$FRONTVER.tar.bz2 || exit 1 cd sane-frontends-$FRONTVER chown -R root:root . + CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-gtkmozembed.pc b/source/xap/seamonkey/pkgconfig/seamonkey-gtkmozembed.pc new file mode 100644 index 000000000..e5053267d --- /dev/null +++ b/source/xap/seamonkey/pkgconfig/seamonkey-gtkmozembed.pc @@ -0,0 +1,11 @@ +prefix=/usr +exec_prefix=/usr +libdir=/usr/@LIB@/seamonkey-@VERSION@ +includedir=/usr/include/seamonkey-@VERSION@ + +Name: Mozilla Gtk Embedding Widget +Description: Mozilla Embedding Widget for Gtk+ +Version: @VERSION@ +Requires: seamonkey-xpcom = @VERSION@ +Libs: -L${libdir} -lgtkembedmoz +Cflags: -I${includedir}/gtkembedmoz diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-js.pc b/source/xap/seamonkey/pkgconfig/seamonkey-js.pc new file mode 100644 index 000000000..31433be28 --- /dev/null +++ b/source/xap/seamonkey/pkgconfig/seamonkey-js.pc @@ -0,0 +1,11 @@ +prefix=/usr +exec_prefix=/usr +libdir=/usr/@LIB@/seamonkey-@VERSION@ +includedir=/usr/include/seamonkey-@VERSION@ + +Name: JavaScript +Description: The Mozilla JavaScript Library +Version: @VERSION@ +Requires: seamonkey-nspr >= 4.7.1 +Libs: -L${libdir} -lmozjs +Cflags: -I${includedir}/js -DXP_UNIX -DJS_THREADSAFE diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-nspr.pc b/source/xap/seamonkey/pkgconfig/seamonkey-nspr.pc new file mode 100644 index 000000000..756e996d6 --- /dev/null +++ b/source/xap/seamonkey/pkgconfig/seamonkey-nspr.pc @@ -0,0 +1,12 @@ +prefix=/usr +exec_prefix=/usr +libdir=/usr/@LIB@/seamonkey-@VERSION@ +includedir=/usr/include/seamonkey-@VERSION@ + +Name: NSPR +Description: The Netscape Portable Runtime +Version: 4.7.1 +Libs: -L/usr/@LIB@/seamonkey-@VERSION@ -lplds4 -lplc4 -lnspr4 -lpthread -ldl +Cflags: -I/usr/include/seamonkey-@VERSION@/nspr + + diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-nss.pc b/source/xap/seamonkey/pkgconfig/seamonkey-nss.pc new file mode 100644 index 000000000..b929f202f --- /dev/null +++ b/source/xap/seamonkey/pkgconfig/seamonkey-nss.pc @@ -0,0 +1,11 @@ +prefix=/usr +exec_prefix=/usr +libdir=/usr/@LIB@/seamonkey-@VERSION@ +includedir=/usr/include/seamonkey-@VERSION@ + +Name: NSS +Description: Mozilla Network Security Services +Version: @VERSION@ +Requires: seamonkey-nspr >= 4.7.1 +Libs: -L${libdir} -lnss3 -lsmime3 -lssl3 -lsoftokn3 +Cflags: -I${includedir}/nss diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc b/source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc new file mode 100644 index 000000000..4550444af --- /dev/null +++ b/source/xap/seamonkey/pkgconfig/seamonkey-plugin.pc @@ -0,0 +1,10 @@ +prefix=/usr +exec_prefix=/usr +libdir=/usr/@LIB@/seamonkey-@VERSION@ +includedir=/usr/include/seamonkey-@VERSION@ + +Name: Mozilla Plug-In API +Description: Mozilla Plug-In API +Version: @VERSION@ +Requires: seamonkey-nspr >= 4.7.1 +Cflags: -I${includedir}/java -I${includedir}/plugin diff --git a/source/xap/seamonkey/pkgconfig/seamonkey-xpcom.pc b/source/xap/seamonkey/pkgconfig/seamonkey-xpcom.pc new file mode 100644 index 000000000..532005671 --- /dev/null +++ b/source/xap/seamonkey/pkgconfig/seamonkey-xpcom.pc @@ -0,0 +1,12 @@ +prefix=/usr +exec_prefix=/usr +libdir=/usr/@LIB@/seamonkey-@VERSION@ +includedir=/usr/include/seamonkey-@VERSION@ +idldir=/usr/share/idl/seamonkey-@VERSION@ + +Name: XPCOM +Description: The Mozilla Cross Platform Component Library +Version: @VERSION@ +Requires: seamonkey-nspr >= 4.7.1 +Libs: -L${libdir} -lxpcom +Cflags: -I${includedir} -I${includedir}/xpcom -I${includedir}/string diff --git a/source/xap/seamonkey/seamonkey.SlackBuild b/source/xap/seamonkey/seamonkey.SlackBuild index a08695589..af563c092 100755 --- a/source/xap/seamonkey/seamonkey.SlackBuild +++ b/source/xap/seamonkey/seamonkey.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,27 +20,23 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=${VERSION:-1.1.17} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(basename $(ls seamonkey-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev) .source)} BUILD=${BUILD:-1} - NUMJOBS=${NUMJOBS:-" -j7 "} -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" -elif [ "$ARCH" = "arm" ]; then - SLKCFLAGS="-O2 -march=armv4 -mtune=xscale" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "armel" ]; then - SLKCFLAGS="-O2 -march=armv4t" +else LIBDIRSUFFIX="" fi @@ -51,15 +47,9 @@ rm -rf $PKG mkdir -p $TMP $PKG/usr cd $TMP -rm -rf mozilla -tar xvf $CWD/seamonkey-${VERSION}.source.tar.xz || exit 1 -cd mozilla || exit 1 - -# Add /usr/lib/mozilla/plugins to MOZ_PLUGINS_PATH: -zcat $CWD/seamonkey.moz_plugin_path.diff.gz \ - | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \ - | patch -p1 --verbose || exit 1 -rm -f xpfe/bootstrap/mozilla.in.orig +rm -rf comm-1.9.1 +tar xvf $CWD/seamonkey-${VERSION}.source.tar.?z* || exit 1 +cd comm-1.9.1 || exit 1 # Make sure the perms/ownerships are sane: chown -R root:root . @@ -71,7 +61,7 @@ find . \ # Fix a long standing bug that's prevented staying current on GTK+. # Thanks to the BLFS folks. :-) -cat >> layout/build/Makefile.in << EOF +cat >> mozilla/layout/build/Makefile.in << EOF ifdef MOZ_ENABLE_CANVAS EXTRA_DSO_LDOPTS += \$(XLDFLAGS) -lX11 -lXrender @@ -83,7 +73,7 @@ chown -R root:root . BUILD_OFFICIAL=1 MOZILLA_OFFICIAL=1 \ ./configure --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ - --enable-optimize="$CFLAGS" \ + --enable-optimize=-O2 \ --disable-debug \ --with-default-mozilla-five-home=/usr/lib${LIBDIRSUFFIX}/seamonkey-${VERSION} \ --enable-strip \ @@ -99,7 +89,6 @@ BUILD_OFFICIAL=1 MOZILLA_OFFICIAL=1 \ --without-system-nspr \ --with-system-zlib \ --with-system-jpeg \ - --with-system-png \ --with-system-mng \ --enable-application=suite \ --enable-xft \ @@ -107,15 +96,25 @@ BUILD_OFFICIAL=1 MOZILLA_OFFICIAL=1 \ --target=$ARCH-slackware-linux \ --build=$ARCH-slackware-linux -BUILD_OFFICIAL=1 MOZILLA_OFFICIAL=1 make $NUMJOBS -s export || exit 1 -BUILD_OFFICIAL=1 MOZILLA_OFFICIAL=1 make $NUMJOBS -s libs || exit 1 -BUILD_OFFICIAL=1 MOZILLA_OFFICIAL=1 DESTDIR=$PKG make install || exit 1 + # --with-system-png +make $NUMJOBS || exit 1 +DESTDIR=$PKG make install || exit 1 -# Install nss headers. -mkdir -p $PKG/usr/include/seamonkey-${VERSION}/nss -find security/nss/lib -name "*.h" -type f -exec cp -a {} $PKG/usr/include/seamonkey-${VERSION}/nss \; -chown -R root:root $PKG/usr/include/seamonkey-${VERSION}/nss -chmod 644 $PKG/usr/include/seamonkey-${VERSION}/nss/* +# Install js/nspr/nss headers. +for includedir in js nspr nspr/obsolete nspr/private nss plugin xpcom ; do + mkdir -p $PKG/usr/include/seamonkey-${VERSION}/$includedir + cp -aL mozilla/dist/include/${includedir}/*.h $PKG/usr/include/seamonkey-${VERSION}/$includedir +done +cp -aL mozilla/dist/include/js/*.tbl mozilla/dist/include/js/*.msg $PKG/usr/include/seamonkey-${VERSION}/js +cp -aL mozilla/dist/include/*.h $PKG/usr/include/seamonkey-${VERSION} +cp -aL mozilla/dist/sdk/include/* $PKG/usr/include/seamonkey-${VERSION} +( cd $PKG/usr/include/seamonkey-${VERSION}/plugin + for file in ../j*.h ; do + ln -sf $file . + done +) +chown -R root:root $PKG/usr/include/seamonkey-${VERSION} +find $PKG/usr/include/seamonkey-${VERSION} -name "*.h" -type f -exec chmod 644 {} \; # Create a more generic include files symlink: ( cd $PKG/usr/include if [ ! -e seamonkey ]; then @@ -123,23 +122,23 @@ chmod 644 $PKG/usr/include/seamonkey-${VERSION}/nss/* fi ) -# Let the nspr be found by gxine: -( cd $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig; ln -s seamonkey-nspr.pc nspr.pc ) - -# A Better Way to handle the problem below is simply to add /usr/lib/seamonkey -# to /etc/ld.so.conf. After all, the various Mozilla offshoots all set an -# LD_LIBRARY_PATH to make sure *they* use the right libraries anyway, and as -# far as I know seamonkey has the only set of Mozilla development libraries -# right now. Plus, doing it this way doesn't stomp all over efforts by people -# who would like to use seamonkey-nss-solibs. +# Install pkgconfig files: +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig +for file in $CWD/pkgconfig/* ; do +cat $file \ + | sed -e "s/@LIB@/lib${LIBDIRSUFFIX}/" \ + -e "s/@VERSION@/$VERSION/" \ + > $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/$(basename $file) +done -## Link some libraries into /usr/lib. Unless this is done, some things (like gxine) -## will be unable to load them, even if they linked with them successfully. -#( cd $PKG/usr/lib${LIBDIRSUFFIX} && ( for somelib in libmozjs.so libnspr4.so libnss3.so libplc4.so libplds4.so libsmime3.so libsoftokn3.so libssl3.so ; do -# # Link to it: -# ln -sf seamonkey-${VERSION}/$somelib . -# done ) -#) +# Add symlinks for the pkgconfig files: +( cd $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig + ln -s seamonkey-js.pc js.pc + ln -s seamonkey-nspr.pc nspr.pc + ln -s seamonkey-nss.pc nss.pc + ln -s seamonkey-plugin.pc plugin.pc + ln -s seamonkey-xpcom.pc xpcom.pc +) # Compress and if needed symlink the man pages: if [ -d $PKG/usr/man ]; then @@ -163,7 +162,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ # This remains the standard plugin directory for all browsers. mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins -# Some software won't compile without this symlink: +# This is traditional. ( cd $PKG/usr/lib${LIBDIRSUFFIX} if [ ! -e seamonkey ]; then ln -sf seamonkey-${VERSION} seamonkey @@ -180,9 +179,11 @@ chown -R root:root $PKG/usr/share/pixmaps chmod 644 $PKG/usr/share/pixmaps/* mkdir -p $PKG/usr/doc/seamonkey-$VERSION -cp -a \ - LEGAL LICENSE README.txt \ - $PKG/usr/doc/seamonkey-$VERSION +( cd mozilla + cp -a \ + LEGAL LICENSE README.txt \ + $PKG/usr/doc/seamonkey-$VERSION +) mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc @@ -198,8 +199,8 @@ mkdir -p $TMP/package-seamonkey-solibs/usr/doc cp -a $PKG/usr/doc/seamonkey-$VERSION $TMP/package-seamonkey-solibs/usr/doc mkdir -p $TMP/package-seamonkey-solibs/usr/lib${LIBDIRSUFFIX}/seamonkey-${VERSION} for file in libfreebl3.chk libfreebl3.so libmozjs.so libnspr4.so libnss3.so \ - libnssckbi.so libplc4.so libplds4.so libsmime3.so libsoftokn3.chk \ - libsoftokn3.so libssl3.so ; do + libnssckbi.so libnssutil3.so libplc4.so libplds4.so libsmime3.so \ + libsoftokn3.chk libsoftokn3.so libssl3.so ; do cp -a $PKG/usr/lib${LIBDIRSUFFIX}/seamonkey-${VERSION}/$file \ $TMP/package-seamonkey-solibs/usr/lib${LIBDIRSUFFIX}/seamonkey-${VERSION} done diff --git a/source/xap/seamonkey/seamonkey.moz_plugin_path.diff b/source/xap/seamonkey/seamonkey.moz_plugin_path.diff deleted file mode 100644 index f967580b6..000000000 --- a/source/xap/seamonkey/seamonkey.moz_plugin_path.diff +++ /dev/null @@ -1,16 +0,0 @@ ---- ./xpfe/bootstrap/mozilla.in.orig 2006-08-20 17:44:28.000000000 -0500 -+++ ./xpfe/bootstrap/mozilla.in 2007-02-19 21:25:32.000000000 -0600 -@@ -60,6 +60,13 @@ - MOZ_PIS_SESSION_PID="$$" - MOZ_PIS_USER_DIR="${MOZ_USER_DIR}" - export MOZ_PIS_API MOZ_PIS_MOZBINDIR MOZ_PIS_SESSION_PID MOZ_PIS_USER_DIR -+ # Include /usr/lib/mozilla/plugins in the plugin path: -+ if [ "$MOZ_PLUGIN_PATH" ] ; then -+ MOZ_PLUGIN_PATH=$MOZ_PLUGIN_PATH:${moz_libdir}/plugins:/usr/lib/mozilla/plugins -+ else -+ MOZ_PLUGIN_PATH=${moz_libdir}/plugins:/usr/lib/mozilla/plugins -+ fi -+ export MOZ_PLUGIN_PATH - - case "${1}" in - "start") diff --git a/source/xap/seamonkey/slack-desc b/source/xap/seamonkey/slack-desc index 978c1d09b..af6ee2408 100644 --- a/source/xap/seamonkey/slack-desc +++ b/source/xap/seamonkey/slack-desc @@ -10,9 +10,9 @@ seamonkey: SeaMonkey (an open-source web browser suite) seamonkey: seamonkey: The SeaMonkey browser suite. SeaMonkey features a state-of-the-art seamonkey: web browser and powerful email client, as well as a WYSIWYG web page -seamonkey: composer and a feature-rich IRC chat client. For web developers, -seamonkey: mozilla.org's DOM inspector and JavaScript debugger tools are -seamonkey: included as well. +seamonkey: composer and a feature-rich IRC chat client. +seamonkey: +seamonkey: seamonkey: seamonkey: Visit the SeaMonkey project at this URL: seamonkey: http://www.mozilla.org/projects/seamonkey/ diff --git a/source/xap/windowmaker/windowmaker.SlackBuild b/source/xap/windowmaker/windowmaker.SlackBuild index 8736f0589..15e32edfc 100755 --- a/source/xap/windowmaker/windowmaker.SlackBuild +++ b/source/xap/windowmaker/windowmaker.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ VERSION=20060427cvs -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-3} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,11 +45,15 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-windowmaker + rm -rf $PKG mkdir -p $TMP $PKG @@ -50,6 +63,9 @@ tar xvf $CWD/WindowMaker-$VERSION.tar.bz2 || exit 1 cd WindowMaker-$VERSION || exit 1 zcat $CWD/windowmaker.no-mmx.diff.gz | patch -p1 --verbose -F 3 || exit 1 + +zcat $CWD/windowmaker.png.1.4.0.diff.gz | patch -p1 --verbose || exit 1 + sh autogen.sh chown -R root:root . @@ -89,6 +105,15 @@ mkdir -p $PKG/usr/doc/WindowMaker-$VERSION cp -a \ AUTHORS BUGFORM BUGS COPYING COPYING.WTFPL FAQ FAQ.I18N FAQ.I18N.cs FAQ.I18N.sk INSTALL INSTALL.cs INSTALL.es INSTALL.fr INSTALL.pt INSTALL.sk MIRRORS NEWS README README.definable-cursor README.pt TODO \ $PKG/usr/doc/WindowMaker-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + cd $TMP rm -rf WindowMaker-extra-0.1 tar xvf $CWD/WindowMaker-extra-0.1.tar.gz || exit 1 @@ -98,7 +123,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --with-iconsdir=/usr/share/pixmaps \ - $ARCH-slackware-linux + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -107,8 +132,8 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null mkdir -p $PKG/etc/X11/xinit -cat $CWD/xinitrc.wmaker > $PKG/etc/X11/xinit/xinitrc.wmaker -chmod 755 $PKG/etc/X11/xinit/xinitrc.wmaker +zcat $CWD/xinitrc.wmaker.gz > $PKG/etc/X11/xinit/xinitrc.wmaker +chmod 0755 $PKG/etc/X11/xinit/xinitrc.wmaker gzip -9 $PKG/usr/man/man1/* $PKG/usr/man/sk/man1/* diff --git a/source/xap/windowmaker/windowmaker.png.1.4.0.diff b/source/xap/windowmaker/windowmaker.png.1.4.0.diff new file mode 100644 index 000000000..a6359c4b2 --- /dev/null +++ b/source/xap/windowmaker/windowmaker.png.1.4.0.diff @@ -0,0 +1,11 @@ +--- ./wrlib/load.c.orig 2008-04-30 15:45:26.000000000 -0500 ++++ ./wrlib/load.c 2010-02-11 15:39:38.000000000 -0600 +@@ -348,7 +348,7 @@ + + #ifdef USE_PNG + /* check for PNG */ +- if (png_check_sig(buffer, 8)) ++ if (!png_sig_cmp(buffer, 0, 8)) + return IM_PNG; + #endif + diff --git a/source/xap/windowmaker/xinitrc.wmaker b/source/xap/windowmaker/xinitrc.wmaker index 4e28503b1..09ca61b4f 100644 --- a/source/xap/windowmaker/xinitrc.wmaker +++ b/source/xap/windowmaker/xinitrc.wmaker @@ -3,8 +3,8 @@ userresources=$HOME/.Xresources usermodmap=$HOME/.Xmodmap -sysresources=/usr/X11R6/lib/X11/xinit/.Xresources -sysmodmap=/usr/X11R6/lib/X11/xinit/.Xmodmap +sysresources=/etc/X11/xinit/.Xresources +sysmodmap=/etc/X11/xinit/.Xmodmap # merge in defaults and keymaps diff --git a/source/xap/xchat/xchat.SlackBuild b/source/xap/xchat/xchat.SlackBuild index 1f05472bf..8058f9043 100755 --- a/source/xap/xchat/xchat.SlackBuild +++ b/source/xap/xchat/xchat.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,17 @@ VERSION=2.8.6 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +BUILD=${BUILD:-5} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) diff --git a/source/xap/xfce/patches/exo_quoting_fix.diff b/source/xap/xfce/patches/exo_quoting_fix.diff deleted file mode 100644 index ac6544576..000000000 --- a/source/xap/xfce/patches/exo_quoting_fix.diff +++ /dev/null @@ -1,66 +0,0 @@ -Index: exo-open/main.c -=================================================================== ---- exo-open/main.c (revision 30250) -+++ exo-open/main.c (revision 30251) -@@ -36,7 +36,17 @@ - #include <exo/exo.h> - - -+/** -+ * For testing this code the following commands should work: -+ * -+ * exo-open --launch WebBrowser http://xfce.org (bug #5461). -+ * exo-open http://xfce.org -+ * exo-open --launch TerminalEmulator ./script.sh 'something with a space' 'nospace' (bug #5132). -+ * exo-open --launch TerminalEmulator ssh -l username some.host.com -+ **/ - -+ -+ - static gboolean opt_help = FALSE; - static gboolean opt_version = FALSE; - static gchar *opt_launch = NULL; -@@ -143,6 +153,8 @@ - { - if (argc > 1) - { -+ /* NOTE: see the comment at the top of this document! */ -+ - /* combine all specified parameters to one parameter string */ - join = g_string_new (NULL); - for (i = 1; argv[i] != NULL; i++) -@@ -150,11 +162,18 @@ - /* separate the arguments */ - if (i > 1) - join = g_string_append_c (join, ' '); -- -- /* append the quoted argument */ -- quoted = g_shell_quote (argv[i]); -- join = g_string_append (join, quoted); -- g_free (quoted); -+ -+ /* only quote arguments with spaces */ -+ if (strchr (argv[i], ' ') != NULL) -+ { -+ quoted = g_shell_quote (argv[i]); -+ join = g_string_append (join, quoted); -+ g_free (quoted); -+ } -+ else -+ { -+ join = g_string_append (join, argv[i]); -+ } - } - parameter = g_string_free (join, FALSE); - } -@@ -163,6 +182,10 @@ - parameter = NULL; - } - -+#ifndef NDEBUG -+ g_message ("launch=%s, wd=%s, parameters (%d)=%s", opt_launch, opt_working_directory, argc, parameter); -+#endif -+ - /* run the preferred application */ - if (!exo_execute_preferred_application (opt_launch, parameter, opt_working_directory, NULL, &err)) - { diff --git a/source/xap/xfce/patches/launcher-plugin-migrate-icon-cat.diff b/source/xap/xfce/patches/launcher-plugin-migrate-icon-cat.diff deleted file mode 100644 index 4370281a3..000000000 --- a/source/xap/xfce/patches/launcher-plugin-migrate-icon-cat.diff +++ /dev/null @@ -1,48 +0,0 @@ -diff --git a/plugins/launcher/launcher.c b/plugins/launcher/launcher.c -index 8edc66c..1e370c4 100644 ---- a/plugins/launcher/launcher.c -+++ b/plugins/launcher/launcher.c -@@ -37,6 +37,30 @@ - #include "launcher-exec.h" - #include "launcher-dialog.h" - -+/* for 4.4 settings migration */ -+static const gchar *icon_category_map[] = { -+ "applications-other", -+ "accessories-text-editor", -+ "system-file-manager", -+ "applications-accessories", -+ "applications-games", -+ "help-browser", -+ "applications-multimedia", -+ "applications-internet", -+ "applications-graphics", -+ "printer", -+ "office-calendar", -+ "applications-office", -+ "audio-card", -+ "utilities-terminal", -+ "applications-development", -+ "preferences-desktop", -+ "applications-system", -+ "applications-other", -+ "applications-accessories", -+}; -+#define ICON_CATEGORY_MAP_MAX (G_N_ELEMENTS (icon_category_map) - 1) -+ - /* prototypes */ - static void launcher_utility_icon_theme_changed (GtkIconTheme *icon_theme, - LauncherPlugin *launcher); -@@ -1216,6 +1240,12 @@ launcher_plugin_read (LauncherPlugin *launcher) - entry->name = launcher_plugin_read_entry (rc, "Name"); - entry->comment = launcher_plugin_read_entry (rc, "Comment"); - entry->icon = launcher_plugin_read_entry (rc, "Icon"); -+ if (G_UNLIKELY (!entry->icon)) -+ { -+ gint icon_category = xfce_rc_read_int_entry (rc, "X-XFCE-IconCategory", -1); -+ if (G_LIKELY (icon_category >= 0 && icon_category <= ICON_CATEGORY_MAP_MAX)) -+ entry->icon = g_strdup (icon_category_map[icon_category]); -+ } - entry->exec = launcher_plugin_read_entry (rc, "Exec"); - entry->path = launcher_plugin_read_entry (rc, "Path"); - diff --git a/source/xap/xfce/patches/migrate-itheme-smartly.diff b/source/xap/xfce/patches/migrate-itheme-smartly.diff deleted file mode 100644 index e9c66ed2e..000000000 --- a/source/xap/xfce/patches/migrate-itheme-smartly.diff +++ /dev/null @@ -1,92 +0,0 @@ -Index: scripts/xfconf-migration-4.6.pl.in -=================================================================== ---- a/scripts/xfconf-migration-4.6.pl.in (revision 29645) -+++ b/scripts/xfconf-migration-4.6.pl.in (working copy) -@@ -256,6 +256,77 @@ - return $mcs.'.xml'; - } - -+sub icon_theme_exists -+{ -+ my ($dirref,$themename) = @_; -+ my @dirs = @{$dirref}; -+ -+ foreach my $d (@dirs) { -+ return 1 if(-f "$d/$themename/index.theme"); -+ } -+ -+ return 0; -+} -+ -+sub migrate_icon_theme -+{ -+ my ($ref,$chan) = @_; -+ my %opts = %{$ref}; -+ my $opt = 'Net/IconThemeName'; -+ -+ return if(!defined($opts{$opt})); -+ my $val = $opts{$opt}->{'value'}; -+ -+ if(lc($val) eq 'rodent') { -+ # we don't ship rodent anymore, so try to find something suitable -+ my @icondirs; -+ if(defined($ENV{'XDG_DATA_HOME'})) { -+ @icondirs = ( $ENV{'XDG_DATA_HOME'} . '/icons' ); -+ } else { -+ @icondirs = ( $ENV{'HOME'} . '/.local/share/icons' ); -+ } -+ -+ if(defined($ENV{'XDG_DATA_DIRS'})) { -+ push(@icondirs, split(/:/, $ENV{'XDG_DATA_DIRS'})); -+ } else { -+ push(@icondirs, ( '/usr/share/icons', '/usr/local/share/icons' )); -+ } -+ -+ $val = undef; -+ foreach my $itheme (('Tango', 'gnome', 'crystalsvg')) { -+ if(icon_theme_exists(\@icondirs, $itheme)) { -+ $val = $itheme; -+ last; -+ } -+ } -+ -+ if(!defined($val)) { -+ # pick the first one that is not 'hicolor' -+ foreach my $d (@icondirs) { -+ opendir(DIR, $d) and do { -+ my @subdirs = grep { $_ ne 'hicolor' && -d "$d/$_" } readdir(DIR); -+ foreach my $sd (@subdirs) { -+ if(-f "$d/$sd/index.theme") { -+ $val = $sd; -+ last; -+ } -+ } -+ closedir(DIR); -+ }; -+ last if(defined($val)); -+ } -+ -+ if(!defined($val)) { -+ # ok, their system is kinda b0rked; not much we can do -+ warn("Couldn't find a suitable icon theme to migrate to"); -+ return; -+ } -+ } -+ } -+ -+ xfconf_set($chan, 'string', '/Net/IconThemeName', $val); -+} -+ - sub migrate_xsettings - { - my $mcs = 'gtk'; -@@ -283,8 +354,7 @@ - '/Net/CursorBlinkTime', 'int'); - save_xfconf_prop($ref, $chan, 'Net/DndDragThreshold', - '/Net/DndDragThreshold', 'int'); -- save_xfconf_prop($ref, $chan, 'Net/IconThemeName', -- '/Net/IconThemeName', 'string'); -+ migrate_icon_theme($ref, $chan); - save_xfconf_prop($ref, $chan, 'Net/ThemeName', - '/Net/ThemeName', 'string'); - diff --git a/source/xap/xfce/patches/terminal-0.4.0-fixup_docdir.diff b/source/xap/xfce/patches/terminal-0.4.0-fixup_docdir.diff deleted file mode 100644 index d9608470f..000000000 --- a/source/xap/xfce/patches/terminal-0.4.0-fixup_docdir.diff +++ /dev/null @@ -1,132 +0,0 @@ -diff -Nur Terminal-0.4.0.orig/Makefile.in Terminal-0.4.0/Makefile.in ---- Terminal-0.4.0.orig/Makefile.in 2009-07-20 13:04:04.000000000 -0500 -+++ Terminal-0.4.0/Makefile.in 2009-07-20 13:50:20.529864039 -0500 -@@ -986,7 +986,7 @@ - - TerminalHelp: TerminalHelp.in Makefile - rm -f TerminalHelp.gen TerminalHelp -- sed -e "s,\@datadir\@,$(datadir),g" \ -+ sed -e "s,\@docdir\@,$(docdir),g" \ - < $(srcdir)/TerminalHelp.in \ - > TerminalHelp.gen - mv TerminalHelp.gen TerminalHelp -diff -Nur Terminal-0.4.0.orig/TerminalHelp.in Terminal-0.4.0/TerminalHelp.in ---- Terminal-0.4.0.orig/TerminalHelp.in 2009-07-20 13:03:50.000000000 -0500 -+++ Terminal-0.4.0/TerminalHelp.in 2009-07-20 13:50:20.529864039 -0500 -@@ -19,7 +19,7 @@ - # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - # - --HELPDIR="@datadir@/doc/Terminal/" -+HELPDIR="@docdir@/" - - if test -n "$LC_ALL"; then - LC=$LC_ALL -diff -Nur Terminal-0.4.0.orig/doc/C/Makefile.in Terminal-0.4.0/doc/C/Makefile.in ---- Terminal-0.4.0.orig/doc/C/Makefile.in 2009-07-20 13:04:02.000000000 -0500 -+++ Terminal-0.4.0/doc/C/Makefile.in 2009-07-20 13:50:20.533867320 -0500 -@@ -260,7 +260,7 @@ - SUBDIRS = \ - images - --TARGET_DIR = $(datadir)/doc/Terminal/C -+TARGET_DIR = $(docdir)/C - STYLESHEET = ../terminal.xsl - DOCUMENT = Terminal.xml - -diff -Nur Terminal-0.4.0.orig/doc/C/images/Makefile.in Terminal-0.4.0/doc/C/images/Makefile.in ---- Terminal-0.4.0.orig/doc/C/images/Makefile.in 2009-07-20 13:04:02.000000000 -0500 -+++ Terminal-0.4.0/doc/C/images/Makefile.in 2009-07-20 13:50:20.533867320 -0500 -@@ -240,7 +240,7 @@ - top_build_prefix = @top_build_prefix@ - top_builddir = @top_builddir@ - top_srcdir = @top_srcdir@ --imagesdir = $(datadir)/doc/Terminal/C/images -+imagesdir = $(docdir)/C/images - images_DATA = \ - terminal-compose-shortcut.png \ - terminal-edit-preferences.png \ -diff -Nur Terminal-0.4.0.orig/doc/Makefile.in Terminal-0.4.0/doc/Makefile.in ---- Terminal-0.4.0.orig/doc/Makefile.in 2009-07-20 13:04:02.000000000 -0500 -+++ Terminal-0.4.0/doc/Makefile.in 2009-07-20 13:51:00.229192942 -0500 -@@ -286,7 +286,7 @@ - fr \ - ja - --cssdir = $(datadir)/doc/Terminal -+cssdir = $(docdir)/ - css_DATA = \ - terminal.css - -diff -Nur Terminal-0.4.0.orig/doc/da/Makefile.in Terminal-0.4.0/doc/da/Makefile.in ---- Terminal-0.4.0.orig/doc/da/Makefile.in 2009-07-20 13:04:02.000000000 -0500 -+++ Terminal-0.4.0/doc/da/Makefile.in 2009-07-20 13:50:20.533867320 -0500 -@@ -260,7 +260,7 @@ - SUBDIRS = \ - images - --TARGET_DIR = $(datadir)/doc/Terminal/da -+TARGET_DIR = $(docdir)/da - STYLESHEET = ../terminal.xsl - DOCUMENT = Terminal.xml - -diff -Nur Terminal-0.4.0.orig/doc/da/images/Makefile.in Terminal-0.4.0/doc/da/images/Makefile.in ---- Terminal-0.4.0.orig/doc/da/images/Makefile.in 2009-07-20 13:04:02.000000000 -0500 -+++ Terminal-0.4.0/doc/da/images/Makefile.in 2009-07-20 13:50:20.533867320 -0500 -@@ -240,7 +240,7 @@ - top_build_prefix = @top_build_prefix@ - top_builddir = @top_builddir@ - top_srcdir = @top_srcdir@ --imagesdir = $(datadir)/doc/Terminal/da/images -+imagesdir = $(docdir)/da/images - images_DATA = \ - terminal-compose-shortcut.png \ - terminal-edit-preferences.png \ -diff -Nur Terminal-0.4.0.orig/doc/fr/Makefile.in Terminal-0.4.0/doc/fr/Makefile.in ---- Terminal-0.4.0.orig/doc/fr/Makefile.in 2009-07-20 13:04:02.000000000 -0500 -+++ Terminal-0.4.0/doc/fr/Makefile.in 2009-07-20 13:50:20.533867320 -0500 -@@ -260,7 +260,7 @@ - SUBDIRS = \ - images - --TARGET_DIR = $(datadir)/doc/Terminal/fr -+TARGET_DIR = $(docdir)/fr - STYLESHEET = ../terminal.xsl - DOCUMENT = Terminal.xml - -diff -Nur Terminal-0.4.0.orig/doc/fr/images/Makefile.in Terminal-0.4.0/doc/fr/images/Makefile.in ---- Terminal-0.4.0.orig/doc/fr/images/Makefile.in 2009-07-20 13:04:03.000000000 -0500 -+++ Terminal-0.4.0/doc/fr/images/Makefile.in 2009-07-20 13:50:20.533867320 -0500 -@@ -240,7 +240,7 @@ - top_build_prefix = @top_build_prefix@ - top_builddir = @top_builddir@ - top_srcdir = @top_srcdir@ --imagesdir = $(datadir)/doc/Terminal/fr/images -+imagesdir = $(docdir)/fr/images - images_DATA = \ - terminal-compose-shortcut.png \ - terminal-edit-preferences.png \ -diff -Nur Terminal-0.4.0.orig/doc/ja/Makefile.in Terminal-0.4.0/doc/ja/Makefile.in ---- Terminal-0.4.0.orig/doc/ja/Makefile.in 2009-07-20 13:04:03.000000000 -0500 -+++ Terminal-0.4.0/doc/ja/Makefile.in 2009-07-20 13:50:20.537889876 -0500 -@@ -260,7 +260,7 @@ - SUBDIRS = \ - images - --TARGET_DIR = $(datadir)/doc/Terminal/ja -+TARGET_DIR = $(docdir)/ja - STYLESHEET = ../terminal.xsl - DOCUMENT = Terminal.xml - -diff -Nur Terminal-0.4.0.orig/doc/ja/images/Makefile.in Terminal-0.4.0/doc/ja/images/Makefile.in ---- Terminal-0.4.0.orig/doc/ja/images/Makefile.in 2009-07-20 13:04:03.000000000 -0500 -+++ Terminal-0.4.0/doc/ja/images/Makefile.in 2009-07-20 13:50:20.537889876 -0500 -@@ -240,7 +240,7 @@ - top_build_prefix = @top_build_prefix@ - top_builddir = @top_builddir@ - top_srcdir = @top_srcdir@ --imagesdir = $(datadir)/doc/Terminal/ja/images -+imagesdir = $(docdir)/ja/images - images_DATA = \ - terminal-compose-shortcut.png \ - terminal-edit-preferences.png \ diff --git a/source/xap/xfce/patches/terminal.gtk.2.18.fix.diff b/source/xap/xfce/patches/terminal.gtk.2.18.fix.diff new file mode 100644 index 000000000..69a9e70e8 --- /dev/null +++ b/source/xap/xfce/patches/terminal.gtk.2.18.fix.diff @@ -0,0 +1,101 @@ +From 028dc2efd846defe796c7fa097ed84818bb43431 Mon Sep 17 00:00:00 2001 +From: Nick Schermer <nick@xfce.org> +Date: Sun, 21 Mar 2010 22:05:31 +0000 +Subject: Disconnect bindings before closing the dialog. + +This avoids possible problems when Gtk+ emits property +changes before the widgets are destroyed. This is currently +the case for text entries in some Gtk 2.18 releases. +--- +diff --git a/terminal/terminal-preferences-dialog.c b/terminal/terminal-preferences-dialog.c +index 587bd92..8f33628 100644 +--- a/terminal/terminal-preferences-dialog.c ++++ b/terminal/terminal-preferences-dialog.c +@@ -64,24 +64,28 @@ terminal_preferences_dialog_class_init (TerminalPreferencesDialogClass *klass) + + + #define BIND_PROPERTIES(name, property) \ +- { object = gtk_builder_get_object (GTK_BUILDER (dialog), name); \ ++ G_STMT_START { \ ++ object = gtk_builder_get_object (GTK_BUILDER (dialog), name); \ + terminal_return_if_fail (G_IS_OBJECT (object)); \ +- exo_mutual_binding_new (G_OBJECT (dialog->preferences), name, \ +- G_OBJECT (object), property); } ++ binding = exo_mutual_binding_new (G_OBJECT (dialog->preferences), name, \ ++ G_OBJECT (object), property); \ ++ dialog->bindings = g_slist_prepend (dialog->bindings, binding); \ ++ } G_STMT_END + + + + static void + terminal_preferences_dialog_init (TerminalPreferencesDialog *dialog) + { +- GError *error = NULL; +- guint i; +- GObject *object, *object2; +- GtkWidget *editor; +- gchar palette_name[16]; +- GtkFileFilter *filter; +- gchar *file; +- const gchar *props_active[] = { "title-mode", "command-login-shell", ++ GError *error = NULL; ++ guint i; ++ GObject *object, *object2; ++ GtkWidget *editor; ++ gchar palette_name[16]; ++ GtkFileFilter *filter; ++ gchar *file; ++ ExoMutualBinding *binding; ++ const gchar *props_active[] = { "title-mode", "command-login-shell", + "command-update-records", "scrolling-single-line", + "scrolling-on-output", "scrolling-on-keystroke", + "scrolling-bar", "font-allow-bold", +@@ -94,9 +98,9 @@ terminal_preferences_dialog_init (TerminalPreferencesDialog *dialog) + , "font-anti-alias" + #endif + }; +- const gchar *props_color[] = { "color-foreground", "color-cursor", +- "color-background", "tab-activity-color", +- "color-selection" }; ++ const gchar *props_color[] = { "color-foreground", "color-cursor", ++ "color-background", "tab-activity-color", ++ "color-selection" }; + + dialog->preferences = terminal_preferences_get (); + +@@ -248,6 +252,8 @@ terminal_preferences_dialog_response (GtkWidget *widget, + gint response, + TerminalPreferencesDialog *dialog) + { ++ GSList *li; ++ + /* check if we should open the user manual */ + if (G_UNLIKELY (response == 1)) + { +@@ -256,6 +262,11 @@ terminal_preferences_dialog_response (GtkWidget *widget, + } + else + { ++ /* disconnect all the bindings */ ++ for (li = dialog->bindings; li != NULL; li = li->next) ++ exo_mutual_binding_unbind (li->data); ++ g_slist_free (dialog->bindings); ++ + /* close the preferences dialog */ + gtk_widget_destroy (widget); + } +diff --git a/terminal/terminal-preferences-dialog.h b/terminal/terminal-preferences-dialog.h +index b2db4f5..268d70a 100644 +--- a/terminal/terminal-preferences-dialog.h ++++ b/terminal/terminal-preferences-dialog.h +@@ -48,6 +48,7 @@ struct _TerminalPreferencesDialog + + TerminalPreferences *preferences; + guint signal_id; ++ GSList *bindings; + }; + + GType terminal_preferences_dialog_get_type (void) G_GNUC_CONST; +-- +cgit v0.8.2.1 diff --git a/source/xap/xfce/patches/thunar-1.0.1-png14.diff b/source/xap/xfce/patches/thunar-1.0.1-png14.diff new file mode 100644 index 000000000..6c67a407d --- /dev/null +++ b/source/xap/xfce/patches/thunar-1.0.1-png14.diff @@ -0,0 +1,11 @@ +--- ./thunar-vfs/thunar-vfs-thumb.c.orig 2009-01-12 14:38:49.000000000 -0600 ++++ ./thunar-vfs/thunar-vfs-thumb.c 2010-02-12 13:24:33.000000000 -0600 +@@ -1169,7 +1169,7 @@ + goto done0; + + /* verify the png signature */ +- if (G_LIKELY (png_check_sig ((png_bytep) signature, sizeof (signature)))) ++ if (G_LIKELY (png_sig_cmp ((png_bytep) signature, 0, sizeof (signature)) == 0)) + rewind (fp); + else + goto done0; diff --git a/source/xap/xfce/patches/thunar-fix_umask_properly.diff b/source/xap/xfce/patches/thunar-fix_umask_properly.diff new file mode 100644 index 000000000..2070b5802 --- /dev/null +++ b/source/xap/xfce/patches/thunar-fix_umask_properly.diff @@ -0,0 +1,52 @@ +commit eb58c6a6ba7f77c2c16016db064524df598ef421 +Author: Jannis Pohlmann <jannis@xfce.org> +Date: Sat Oct 3 11:49:41 2009 +0200 + + Fix bugs #3532 (umask < 0022 not honoured) and #5813 properly (I hope). + + The previous patch applied in e53de71e6add9b28ba034111a1d19db7def8f7e7 + made things worse than before: it used DEFFILEMODE which seems to be + BSD-specific for creating files. It also reset the umask to 0 when + creating the first directory with _thunar_vfs_io_jobs_mkdir(). + + What we really want is to use 0777 (dirs) and 0666 (files) and let the + standard C system calls like open() apply the umask value. This should + work on all POSIX-compliant systems. + + Patch provided by Craig Ringer <craig@postnewspapers.com.au>. + +diff --git a/thunar-vfs/thunar-vfs-io-jobs.c b/thunar-vfs/thunar-vfs-io-jobs.c +index 8d70812..c94523a 100644 +--- a/thunar-vfs/thunar-vfs-io-jobs.c ++++ b/thunar-vfs/thunar-vfs-io-jobs.c +@@ -432,8 +432,12 @@ _thunar_vfs_io_jobs_create (ThunarVfsJob *job, + absolute_path = thunar_vfs_path_dup_string (lp->data); + + again: +- /* try to create the file at the given path */ +- fd = g_open (absolute_path, O_CREAT | O_EXCL | O_WRONLY, DEFFILEMODE); ++ /* Try to create the file at the given path. ++ * ++ * Note that despite the 0666 mask, we won't really create a world-writable ++ * file unless the user's umask permits it (ie the umask is 0000). ++ */ ++ fd = g_open (absolute_path, O_CREAT | O_EXCL | O_WRONLY, 0666); + if (G_UNLIKELY (fd < 0)) + { + /* check if the file already exists */ +@@ -707,8 +711,13 @@ _thunar_vfs_io_jobs_mkdir (ThunarVfsJob *job, + /* update the progress information */ + _thunar_vfs_job_process_path (job, lp); + +- /* try to create the target directory */ +- if (!_thunar_vfs_io_ops_mkdir (lp->data, 0777 & ~umask(0), THUNAR_VFS_IO_OPS_NONE, error)) ++ /* try to create the target directory ++ * ++ * Note that the mode specified here is limited by the user's umask, so we will not ++ * actually be creating a world writable directory unless the user's umask permits ++ * it. ++ */ ++ if (!_thunar_vfs_io_ops_mkdir (lp->data, 0777, THUNAR_VFS_IO_OPS_NONE, error)) + return FALSE; + } + diff --git a/source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff b/source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff new file mode 100644 index 000000000..a8d5b2a5f --- /dev/null +++ b/source/xap/xfce/patches/xfce-utils.xinitrc.consolekit.diff @@ -0,0 +1,11 @@ +--- ./scripts/xinitrc.in.in.orig 2009-04-09 18:21:13.000000000 -0500 ++++ ./scripts/xinitrc.in.in 2010-05-06 03:06:02.000000000 -0500 +@@ -131,7 +131,7 @@ + x|xno*) + ;; + *) +- $xfcesm ++ ck-launch-session $xfcesm + + if test $kill_sshagent -eq 1; then + eval `$sshagent -k` diff --git a/source/xap/xfce/patches/xfce4-settings.libxklavier5.diff b/source/xap/xfce/patches/xfce4-settings.libxklavier5.diff new file mode 100644 index 000000000..d5f8ed8c6 --- /dev/null +++ b/source/xap/xfce/patches/xfce4-settings.libxklavier5.diff @@ -0,0 +1,11 @@ +--- ./dialogs/keyboard-settings/xfce-keyboard-settings.c.orig 2010-01-02 07:31:06.000000000 -0600 ++++ ./dialogs/keyboard-settings/xfce-keyboard-settings.c 2010-02-12 02:11:05.000000000 -0600 +@@ -457,7 +457,7 @@ + + #ifdef HAVE_LIBXKLAVIER + /* Stop xklavier engine */ +- xkl_engine_stop_listen (settings->priv->xkl_engine); ++ xkl_engine_stop_listen (settings->priv->xkl_engine, XKLL_TRACK_KEYBOARD_STATE); + #endif /* HAVE_LIBXKLAVIER */ + + g_object_unref (settings->priv->provider); diff --git a/source/xap/xfce/xfce.SlackBuild b/source/xap/xfce/xfce.SlackBuild index 2ed8042e6..a59aa9497 100755 --- a/source/xap/xfce/xfce.SlackBuild +++ b/source/xap/xfce/xfce.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2003 Slackware Linux, Inc., Concord, CA, USA -# Copyright 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,20 +22,35 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=4.6.1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-5} +BUILD=${BUILD:-8} # A few tarballs have different versions; handle them here -XDT_VERS=4.6.0 # xfce4-dev-tools version -EXO_VERS=0.3.101 # exo version +XDT_VERS=4.7.2 # xfce4-dev-tools version +# We're going to ship xdt from git (targeting xfce-4.8) since it's not used +# for building release tarballs anyway, but it's handy to have around for +# building from git, and some folks might want to do that later... +EXO_VERS=0.3.106 # exo version THUNAR_VERS=1.0.1 # thunar version GXE_VERS=2.6.0 # gtk-xfce-engine version -TERM_VERS=0.4.0 # terminal version +TERM_VERS=0.4.4 # terminal version MPAD_VERS=0.2.16 # mousepad version XFWMTHEME_VERS=4.6.0 # xfwm4-themes version +SETTINGS_VERS=4.6.4 # xfce4-settings version +PANEL_VERS=4.6.3 # xfce4-panel version +XFCEGUI_VERS=4.6.3 # libxfcegui4 version NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp/xfce-build-dir} PKG=$TMP/package-xfce @@ -49,6 +64,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -66,12 +84,12 @@ for file in \ xfce4-dev-tools-$XDT_VERS.tar.$COMPRESSION \ libxfce4util-$VERSION.tar.$COMPRESSION \ xfconf-$VERSION.tar.$COMPRESSION \ - libxfcegui4-$VERSION.tar.$COMPRESSION \ + libxfcegui4-$XFCEGUI_VERS.tar.$COMPRESSION \ libxfce4menu-$VERSION.tar.$COMPRESSION \ exo-$EXO_VERS.tar.$COMPRESSION \ - xfce4-panel-$VERSION.tar.$COMPRESSION \ + xfce4-panel-$PANEL_VERS.tar.$COMPRESSION \ Thunar-$THUNAR_VERS.tar.$COMPRESSION \ - xfce4-settings-$VERSION.tar.$COMPRESSION \ + xfce4-settings-$SETTINGS_VERS.tar.$COMPRESSION \ xfce4-session-$VERSION.tar.$COMPRESSION \ xfdesktop-$VERSION.tar.$COMPRESSION \ xfwm4-$VERSION.tar.$COMPRESSION \ @@ -100,24 +118,29 @@ do if [ "$file" = "orage-$VERSION.tar.$COMPRESSION" ]; then zcat $CWD/patches/xfcalendar.desktop.in.diff.gz | patch -p1 || exit 1 fi - # Fix http://bugzilla.xfce.org/show_bug.cgi?id=5461 - # and enable python bindings in libexo - if [ "$file" = "exo-$EXO_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/exo_fix_quoting.diff.gz | patch -p0 || exit 1 - PACKAGE_SPECIFIC_OPTIONS="--enable-python" - fi - # Make Terminal respect --docdir + # Fix Terminal's title bar and preferences problems with GTK+ 2.18: if [ "$file" = "Terminal-$TERM_VERS.tar.$COMPRESSION" ]; then - zcat $CWD/patches/terminal-0.4.0-fixup_docdir.diff.gz | patch -p1 || exit 1 + zcat $CWD/patches/terminal.gtk.2.18.fix.diff.gz | patch -p1 || exit 1 fi # Make Thunar respect --docdir if [ "$file" = "Thunar-$THUNAR_VERS.tar.$COMPRESSION" ]; then zcat $CWD/patches/thunar-1.0.1-fixup_docdir.diff.gz | patch -p1 || exit 1 + zcat $CWD/patches/thunar-fix_umask_properly.diff.gz | patch -p1 || exit 1 + # Port to PNG 1.4.0: + zcat $CWD/patches/thunar-1.0.1-png14.diff.gz | patch -p1 || exit 1 fi # Fix the missing education icon in the desktop menu if [ "$file" = "xfdesktop-$VERSION.tar.$COMPRESSION" ]; then zcat $CWD/patches/xfdesktop-fix_education_icon.diff.gz | patch -p1 || exit 1 fi + # Port xfce4-settings to libxklavier-5.x: + if [ "$file" = "xfce4-settings-$SETTINGS_VERS.tar.$COMPRESSION" ]; then + zcat $CWD/patches/xfce4-settings.libxklavier5.diff.gz | patch -p1 || exit 1 + fi + # Launch xfce through consolekit so that ck enabled stuff works in xfce: + if [ "$file" = "xfce-utils-$VERSION.tar.$COMPRESSION" ]; then + zcat $CWD/patches/xfce-utils.xinitrc.consolekit.diff.gz | patch -p1 || exit 1 + fi # End patches/package-specific stuff CFLAGS="$SLKCFLAGS" \ @@ -148,6 +171,14 @@ do $PKG/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION) \ 2> /dev/null || true + # If there's a ChangeLog, installing at least part of the recent history + # is useful, but don't let it get totally out of control: + if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/xfce-$VERSION/$(basename $file .tar.$COMPRESSION)) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog + fi + cd - ; done diff --git a/source/xap/xfce4-notifyd/doinst.sh b/source/xap/xfce4-notifyd/doinst.sh new file mode 100644 index 000000000..ec1b3d8a2 --- /dev/null +++ b/source/xap/xfce4-notifyd/doinst.sh @@ -0,0 +1,10 @@ +if [ -x /usr/bin/update-desktop-database ]; then + /usr/bin/update-desktop-database -q usr/share/applications 2>/dev/null +fi + +if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then + if [ -x /usr/bin/gtk-update-icon-cache ]; then + /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1 + fi +fi + diff --git a/source/kde/mplayerthumbs/slack-desc b/source/xap/xfce4-notifyd/slack-desc index 78f3cd032..1463db0bd 100644 --- a/source/kde/mplayerthumbs/slack-desc +++ b/source/xap/xfce4-notifyd/slack-desc @@ -6,14 +6,14 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -mplayerthumbs: mplayerthumbs (media thumbnailer for KDE) -mplayerthumbs: -mplayerthumbs: MPlayerThumbs is a thumbnail generator for KDE file managers -mplayerthumbs: including Konqueror and Dolphin. It uses MPlayer to create -mplayerthumbs: thumbnails for all supported media types. -mplayerthumbs: -mplayerthumbs: MPlayerThumbs was written by Marco Gulino. -mplayerthumbs: -mplayerthumbs: -mplayerthumbs: -mplayerthumbs: +xfce4-notifyd: xfce4-notifyd (Xfce Notify Daemon) +xfce4-notifyd: +xfce4-notifyd: Xfce4-notifyd is a simple, visually-appealing notification daemon +xfce4-notifyd: for Xfce. Applications can use xfce4-notifyd to pop up a notification +xfce4-notifyd: bubble by sending messages through D-Bus. +xfce4-notifyd: +xfce4-notifyd: Homepage: http://spuriousinterrupt.org/projects/xfce4-notifyd +xfce4-notifyd: +xfce4-notifyd: +xfce4-notifyd: +xfce4-notifyd: diff --git a/source/xap/xfce4-notifyd/xfce4-notifyd.SlackBuild b/source/xap/xfce4-notifyd/xfce4-notifyd.SlackBuild new file mode 100755 index 000000000..2f33dbd88 --- /dev/null +++ b/source/xap/xfce4-notifyd/xfce4-notifyd.SlackBuild @@ -0,0 +1,103 @@ +#!/bin/sh + +# Slackware build script for Xfce4-notifyd + +# Copyright 2008 Frank Caraballo <fecaraballo{at}gmail{dot}com> +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=xfce4-notifyd +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc/xfce \ + --localstatedir=/var \ + --enable-debug=no \ + --build=$ARCH-slackware-linux + +make || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING INSTALL NEWS README TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild b/source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild index 1487b2d05..1aa24bde0 100755 --- a/source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild +++ b/source/xap/xfce4-power-manager/xfce4-power-manager.SlackBuild @@ -2,8 +2,8 @@ # Slackware build script for xfce4-power-manager -# Copyright 2008-2009 Robby Workman Northport, Alabama, USA -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006-2010 Robby Workman Northport, Alabama, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,14 +24,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=xfce4-power-manager -VERSION=0.6.6 -ARCH=${ARCH:-x86_64} +PKGNAM=xfce4-power-manager +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,14 +51,17 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -60,11 +72,14 @@ find . \ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ - --sysconfdir=/etc/xfce \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc/xfce \ --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --enable-shared=yes \ + --enable-static=no \ --enable-debug=no \ + --disable-network-manager \ --build=$ARCH-slackware-linux make || exit 1 @@ -73,19 +88,29 @@ make install DESTDIR=$PKG find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/html +gzip -9 $PKG/usr/man/man?/*.? + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/html cp -a \ - AUTHORS COPYING ChangeLog INSTALL NEWS README TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION -( cd $PKG/usr/doc/$PRGNAM-$VERSION/html + AUTHORS COPYING NEWS README TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION/html ln -s /usr/share/xfce4/doc/C/xfce4-power-manager.html index.html ln -s /usr/share/xfce4/doc/C/images . ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/xap/xine-lib/xine-lib-1.1.17.ff.diff b/source/xap/xine-lib/xine-lib-1.1.17.ff.diff new file mode 100644 index 000000000..c08913eaa --- /dev/null +++ b/source/xap/xine-lib/xine-lib-1.1.17.ff.diff @@ -0,0 +1,1044 @@ +--- ./src/combined/ffmpeg/ff_video_decoder.c.orig 2009-11-30 14:55:46.000000000 -0600 ++++ ./src/combined/ffmpeg/ff_video_decoder.c 2009-04-02 13:44:01.000000000 -0500 +@@ -1,25 +1,25 @@ + /* + * Copyright (C) 2001-2008 the xine project +- * ++ * + * This file is part of xine, a free video player. +- * ++ * + * xine is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. +- * ++ * + * xine is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +- * ++ * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * xine video decoder plugin using ffmpeg + */ +- ++ + #ifdef HAVE_CONFIG_H + #include "config.h" + #include "../../libffmpeg/ffmpeg_config.h" +@@ -73,7 +73,7 @@ + int thread_count; + int8_t skip_loop_filter_enum; + int8_t choose_speed_over_accuracy; +- ++ + xine_t *xine; + } ff_video_class_t; + +@@ -107,13 +107,13 @@ + int bufsize; + int size; + int skipframes; +- ++ + int slice_offset_size; + + AVFrame *av_frame; + AVCodecContext *context; + AVCodec *codec; +- ++ + int pp_quality; + int pp_flags; + pp_context_t *pp_context; +@@ -126,7 +126,7 @@ + int aspect_ratio_prio; + int frame_flags; + int crop_right, crop_bottom; +- ++ + int output_format; + + xine_list_t *dr1_frames; +@@ -154,7 +154,7 @@ + vo_frame_t *img; + int width = context->width; + int height = context->height; +- ++ + if (!this->bih.biWidth || !this->bih.biHeight) { + this->bih.biWidth = width; + this->bih.biHeight = height; +@@ -166,12 +166,12 @@ + set_stream_info(this); + } + } +- ++ + avcodec_align_dimensions(context, &width, &height); + + if( this->context->pix_fmt != PIX_FMT_YUV420P && this->context->pix_fmt != PIX_FMT_YUVJ420P ) { + if (!this->is_direct_rendering_disabled) { +- xprintf(this->stream->xine, XINE_VERBOSITY_LOG, ++ xprintf(this->stream->xine, XINE_VERBOSITY_LOG, + _("ffmpeg_video_dec: unsupported frame format, DR1 disabled.\n")); + this->is_direct_rendering_disabled = 1; + } +@@ -182,14 +182,14 @@ + av_frame->data[2]= NULL; + return avcodec_default_get_buffer(context, av_frame); + } +- ++ + if((width != this->bih.biWidth) || (height != this->bih.biHeight)) { + if(this->stream->video_out->get_capabilities(this->stream->video_out) & VO_CAP_CROP) { + this->crop_right = width - this->bih.biWidth; + this->crop_bottom = height - this->bih.biHeight; + } else { + if (!this->is_direct_rendering_disabled) { +- xprintf(this->stream->xine, XINE_VERBOSITY_LOG, ++ xprintf(this->stream->xine, XINE_VERBOSITY_LOG, + _("ffmpeg_video_dec: unsupported frame dimensions, DR1 disabled.\n")); + this->is_direct_rendering_disabled = 1; + } +@@ -204,7 +204,7 @@ + img = this->stream->video_out->get_frame (this->stream->video_out, + width, + height, +- this->aspect_ratio, ++ this->aspect_ratio, + this->output_format, + VO_BOTH_FIELDS|this->frame_flags); + +@@ -246,7 +246,7 @@ + } + + xine_list_iterator_t it; +- ++ + it = xine_list_find(this->dr1_frames, av_frame); + assert(it); + if( it != NULL ) +@@ -300,7 +300,7 @@ + } + + if (!this->codec) { +- xprintf (this->stream->xine, XINE_VERBOSITY_LOG, ++ xprintf (this->stream->xine, XINE_VERBOSITY_LOG, + _("ffmpeg_video_dec: couldn't find ffmpeg decoder for buf type 0x%X\n"), + codec_type); + _x_stream_info_set(this->stream, XINE_STREAM_INFO_VIDEO_HANDLED, 0); +@@ -309,14 +309,14 @@ + + lprintf("lavc decoder found\n"); + +- /* force (width % 8 == 0), otherwise there will be +- * display problems with Xv. +- */ ++ /* force (width % 8 == 0), otherwise there will be ++ * display problems with Xv. ++ */ + this->bih.biWidth = (this->bih.biWidth + 1) & (~1); + + this->context->width = this->bih.biWidth; + this->context->height = this->bih.biHeight; +- this->context->stream_codec_tag = this->context->codec_tag = ++ this->context->stream_codec_tag = this->context->codec_tag = + _x_stream_info_get(this->stream, XINE_STREAM_INFO_VIDEO_FOURCC); + + +@@ -325,14 +325,14 @@ + if(this->codec->capabilities & CODEC_CAP_DR1 && this->codec->id != CODEC_ID_H264) { + this->context->flags |= CODEC_FLAG_EMU_EDGE; + } +- ++ + if (this->class->choose_speed_over_accuracy) + this->context->flags2 |= CODEC_FLAG2_FAST; + + pthread_mutex_lock(&ffmpeg_lock); + if (avcodec_open (this->context, this->codec) < 0) { + pthread_mutex_unlock(&ffmpeg_lock); +- xprintf (this->stream->xine, XINE_VERBOSITY_LOG, ++ xprintf (this->stream->xine, XINE_VERBOSITY_LOG, + _("ffmpeg_video_dec: couldn't open decoder\n")); + free(this->context); + this->context = NULL; +@@ -340,22 +340,6 @@ + return; + } + +- if (this->codec->id == CODEC_ID_VC1 && +- (!this->bih.biWidth || !this->bih.biHeight)) { +- /* VC1 codec must be re-opened with correct width and height. */ +- avcodec_close(this->context); +- +- if (avcodec_open (this->context, this->codec) < 0) { +- pthread_mutex_unlock(&ffmpeg_lock); +- xprintf (this->stream->xine, XINE_VERBOSITY_LOG, +- _("ffmpeg_video_dec: couldn't open decoder (pass 2)\n")); +- free(this->context); +- this->context = NULL; +- _x_stream_info_set(this->stream, XINE_STREAM_INFO_VIDEO_HANDLED, 0); +- return; +- } +- } +- + if (this->class->thread_count > 1) { + avcodec_thread_init(this->context, this->class->thread_count); + this->context->thread_count = this->class->thread_count; +@@ -384,14 +368,14 @@ + (this->stream->video_out->open) (this->stream->video_out, this->stream); + + this->skipframes = 0; +- ++ + /* enable direct rendering by default */ + this->output_format = XINE_IMGFMT_YV12; + #ifdef ENABLE_DIRECT_RENDERING + if( this->codec->capabilities & CODEC_CAP_DR1 && this->codec->id != CODEC_ID_H264 ) { + this->context->get_buffer = get_buffer; + this->context->release_buffer = release_buffer; +- xprintf(this->stream->xine, XINE_VERBOSITY_LOG, ++ xprintf(this->stream->xine, XINE_VERBOSITY_LOG, + _("ffmpeg_video_dec: direct rendering enabled\n")); + } + #endif +@@ -422,25 +406,25 @@ + + static void choose_speed_over_accuracy_cb(void *user_data, xine_cfg_entry_t *entry) { + ff_video_class_t *class = (ff_video_class_t *) user_data; +- ++ + class->choose_speed_over_accuracy = entry->num_value; + } + + static void skip_loop_filter_enum_cb(void *user_data, xine_cfg_entry_t *entry) { + ff_video_class_t *class = (ff_video_class_t *) user_data; +- ++ + class->skip_loop_filter_enum = entry->num_value; + } + + static void thread_count_cb(void *user_data, xine_cfg_entry_t *entry) { + ff_video_class_t *class = (ff_video_class_t *) user_data; +- ++ + class->thread_count = entry->num_value; + } + + static void pp_quality_cb(void *user_data, xine_cfg_entry_t *entry) { + ff_video_class_t *class = (ff_video_class_t *) user_data; +- ++ + class->pp_quality = entry->num_value; + } + +@@ -453,15 +437,15 @@ + this->pp_flags); + if(this->pp_mode) + pp_free_mode(this->pp_mode); +- +- this->pp_mode = pp_get_mode_by_name_and_quality("hb:a,vb:a,dr:a", ++ ++ this->pp_mode = pp_get_mode_by_name_and_quality("hb:a,vb:a,dr:a", + this->pp_quality); + } else { + if(this->pp_mode) { + pp_free_mode(this->pp_mode); + this->pp_mode = NULL; + } +- ++ + if(this->pp_context) { + pp_free_context(this->pp_context); + this->pp_context = NULL; +@@ -486,22 +470,22 @@ + this->pp_available = 0; + break; + } +- ++ + /* Detect what cpu accel we have */ + cpu_caps = xine_mm_accel(); + this->pp_flags = PP_FORMAT_420; +- ++ + if(cpu_caps & MM_ACCEL_X86_MMX) + this->pp_flags |= PP_CPU_CAPS_MMX; +- ++ + if(cpu_caps & MM_ACCEL_X86_MMXEXT) + this->pp_flags |= PP_CPU_CAPS_MMX2; +- +- if(cpu_caps & MM_ACCEL_X86_3DNOW) ++ ++ if(cpu_caps & MM_ACCEL_X86_3DNOW) + this->pp_flags |= PP_CPU_CAPS_3DNOW; +- ++ + /* Set level */ +- pp_change_quality(this); ++ pp_change_quality(this); + } + + static int ff_handle_mpeg_sequence(ff_video_decoder_t *this, mpeg_parser_t *parser) { +@@ -510,13 +494,13 @@ + * init codec + */ + if (this->decoder_init_mode) { +- _x_meta_info_set_utf8(this->stream, XINE_META_INFO_VIDEOCODEC, ++ _x_meta_info_set_utf8(this->stream, XINE_META_INFO_VIDEOCODEC, + "mpeg-1 (ffmpeg)"); + + init_video_codec (this, BUF_VIDEO_MPEG); + this->decoder_init_mode = 0; + } +- ++ + /* frame format change */ + if ((parser->width != this->bih.biWidth) || + (parser->height != this->bih.biHeight) || +@@ -542,7 +526,7 @@ + xine_event_send(this->stream, &event); + } + this->video_step = this->mpeg_parser->frame_duration; +- ++ + return 1; + } + +@@ -611,7 +595,7 @@ + this->bih.biHeight); + + } else if (this->context->pix_fmt == PIX_FMT_RGB32) { +- ++ + int x, plane_ptr = 0; + uint32_t *argb_pixels; + uint32_t argb; +@@ -620,7 +604,7 @@ + argb_pixels = (uint32_t *)sy; + for(x = 0; x < img->width; x++) { + uint8_t r, g, b; +- ++ + /* this is endian-safe as the ARGB pixels are stored in + * machine order */ + argb = *argb_pixels++; +@@ -635,9 +619,9 @@ + } + sy += this->av_frame->linesize[0]; + } +- ++ + yuv444_to_yuy2(&this->yuv, img->base[0], img->pitches[0]); +- ++ + } else if (this->context->pix_fmt == PIX_FMT_RGB565) { + + int x, plane_ptr = 0; +@@ -648,7 +632,7 @@ + src = sy; + for(x = 0; x < img->width; x++) { + uint8_t r, g, b; +- ++ + /* a 16-bit RGB565 pixel is supposed to be stored in native-endian + * byte order; the following should be endian-safe */ + pixel16 = *((uint16_t *)src); +@@ -664,20 +648,20 @@ + } + sy += this->av_frame->linesize[0]; + } +- ++ + yuv444_to_yuy2(&this->yuv, img->base[0], img->pitches[0]); +- ++ + } else if (this->context->pix_fmt == PIX_FMT_RGB555) { +- ++ + int x, plane_ptr = 0; + uint8_t *src; + uint16_t pixel16; +- ++ + for(y = 0; y < this->bih.biHeight; y++) { + src = sy; + for(x = 0; x < img->width; x++) { + uint8_t r, g, b; +- ++ + /* a 16-bit RGB555 pixel is supposed to be stored in native-endian + * byte order; the following should be endian-safe */ + pixel16 = *((uint16_t *)src); +@@ -693,9 +677,9 @@ + } + sy += this->av_frame->linesize[0]; + } +- ++ + yuv444_to_yuy2(&this->yuv, img->base[0], img->pitches[0]); +- ++ + } else if (this->context->pix_fmt == PIX_FMT_BGR24) { + + int x, plane_ptr = 0; +@@ -705,7 +689,7 @@ + src = sy; + for(x = 0; x < img->width; x++) { + uint8_t r, g, b; +- ++ + b = *src++; + g = *src++; + r = *src++; +@@ -717,9 +701,9 @@ + } + sy += this->av_frame->linesize[0]; + } +- ++ + yuv444_to_yuy2(&this->yuv, img->base[0], img->pitches[0]); +- ++ + } else if (this->context->pix_fmt == PIX_FMT_RGB24) { + + int x, plane_ptr = 0; +@@ -729,7 +713,7 @@ + src = sy; + for(x = 0; x < img->width; x++) { + uint8_t r, g, b; +- ++ + r = *src++; + g = *src++; + b = *src++; +@@ -741,11 +725,11 @@ + } + sy += this->av_frame->linesize[0]; + } +- ++ + yuv444_to_yuy2(&this->yuv, img->base[0], img->pitches[0]); +- ++ + } else if (this->context->pix_fmt == PIX_FMT_PAL8) { +- ++ + int x, plane_ptr = 0; + uint8_t *src; + uint8_t pixel; +@@ -780,34 +764,34 @@ + } + sy += this->av_frame->linesize[0]; + } +- ++ + yuv444_to_yuy2(&this->yuv, img->base[0], img->pitches[0]); +- ++ + } else { +- ++ + for (y = 0; y < this->bih.biHeight; y++) { + xine_fast_memcpy (dy, sy, img->width); +- ++ + dy += img->pitches[0]; +- ++ + sy += this->av_frame->linesize[0]; + } + + for (y = 0; y < this->bih.biHeight / 2; y++) { +- ++ + if (this->context->pix_fmt != PIX_FMT_YUV444P) { +- ++ + xine_fast_memcpy (du, su, img->width/2); + xine_fast_memcpy (dv, sv, img->width/2); +- ++ + } else { +- ++ + int x; + uint8_t *src; + uint8_t *dst; +- ++ + /* subsample */ +- ++ + src = su; dst = du; + for (x=0; x<(img->width/2); x++) { + *dst = *src; +@@ -822,7 +806,7 @@ + } + + } +- ++ + du += img->pitches[1]; + dv += img->pitches[2]; + +@@ -840,8 +824,8 @@ + static void ff_check_bufsize (ff_video_decoder_t *this, int size) { + if (size > this->bufsize) { + this->bufsize = size + size / 2; +- xprintf(this->stream->xine, XINE_VERBOSITY_LOG, +- _("ffmpeg_video_dec: increasing buffer to %d to avoid overflow.\n"), ++ xprintf(this->stream->xine, XINE_VERBOSITY_LOG, ++ _("ffmpeg_video_dec: increasing buffer to %d to avoid overflow.\n"), + this->bufsize); + this->buf = realloc(this->buf, this->bufsize + FF_INPUT_BUFFER_PADDING_SIZE ); + } +@@ -887,28 +871,28 @@ + if (buf->decoder_flags & BUF_FLAG_STDHEADER) { + + lprintf("standard header\n"); +- ++ + /* init package containing bih */ + memcpy ( &this->bih, this->buf, sizeof(xine_bmiheader) ); + + if (this->bih.biSize > sizeof(xine_bmiheader)) { + this->context->extradata_size = this->bih.biSize - sizeof(xine_bmiheader); +- this->context->extradata = malloc(this->context->extradata_size + ++ this->context->extradata = malloc(this->context->extradata_size + + FF_INPUT_BUFFER_PADDING_SIZE); + memcpy(this->context->extradata, this->buf + sizeof(xine_bmiheader), + this->context->extradata_size); + } +- ++ + this->context->bits_per_sample = this->bih.biBitCount; +- ++ + } else { +- ++ + switch (codec_type) { + case BUF_VIDEO_RV10: + case BUF_VIDEO_RV20: + this->bih.biWidth = _X_BE_16(&this->buf[12]); + this->bih.biHeight = _X_BE_16(&this->buf[14]); +- ++ + this->context->sub_id = _X_BE_32(&this->buf[30]); + + this->context->slice_offset = calloc(SLICE_OFFSET_SIZE, sizeof(int)); +@@ -950,7 +934,7 @@ + } + + static void ff_handle_special_buffer (ff_video_decoder_t *this, buf_element_t *buf) { +- /* take care of all the various types of special buffers ++ /* take care of all the various types of special buffers + * note that order is important here */ + lprintf("special buffer\n"); + +@@ -959,34 +943,34 @@ + + lprintf("BUF_SPECIAL_STSD_ATOM\n"); + this->context->extradata_size = buf->decoder_info[2]; +- this->context->extradata = malloc(buf->decoder_info[2] + ++ this->context->extradata = malloc(buf->decoder_info[2] + + FF_INPUT_BUFFER_PADDING_SIZE); + memcpy(this->context->extradata, buf->decoder_info_ptr[2], + buf->decoder_info[2]); + + } else if (buf->decoder_info[1] == BUF_SPECIAL_DECODER_CONFIG && + !this->context->extradata_size) { +- ++ + lprintf("BUF_SPECIAL_DECODER_CONFIG\n"); + this->context->extradata_size = buf->decoder_info[2]; + this->context->extradata = malloc(buf->decoder_info[2] + + FF_INPUT_BUFFER_PADDING_SIZE); + memcpy(this->context->extradata, buf->decoder_info_ptr[2], + buf->decoder_info[2]); +- ++ + } else if (buf->decoder_info[1] == BUF_SPECIAL_PALETTE) { + unsigned int i; + + palette_entry_t *demuxer_palette; + AVPaletteControl *decoder_palette; +- ++ + lprintf("BUF_SPECIAL_PALETTE\n"); + this->context->palctrl = &this->palette_control; + decoder_palette = (AVPaletteControl *)this->context->palctrl; + demuxer_palette = (palette_entry_t *)buf->decoder_info_ptr[2]; + + for (i = 0; i < buf->decoder_info[2]; i++) { +- decoder_palette->palette[i] = ++ decoder_palette->palette[i] = + (demuxer_palette[i].r << 16) | + (demuxer_palette[i].g << 8) | + (demuxer_palette[i].b << 0); +@@ -995,20 +979,20 @@ + + } else if (buf->decoder_info[1] == BUF_SPECIAL_RV_CHUNK_TABLE) { + int i; +- ++ + lprintf("BUF_SPECIAL_RV_CHUNK_TABLE\n"); + this->context->slice_count = buf->decoder_info[2]+1; + + lprintf("slice_count=%d\n", this->context->slice_count); +- ++ + if(this->context->slice_count > this->slice_offset_size) { + this->context->slice_offset = realloc(this->context->slice_offset, + sizeof(int)*this->context->slice_count); + this->slice_offset_size = this->context->slice_count; + } +- ++ + for(i = 0; i < this->context->slice_count; i++) { +- this->context->slice_offset[i] = ++ this->context->slice_offset[i] = + ((uint32_t *) buf->decoder_info_ptr[2])[(2*i)+1]; + lprintf("slice_offset[%d]=%d\n", i, this->context->slice_offset[i]); + } +@@ -1051,7 +1035,7 @@ + + if (!this->decoder_ok) + return; +- ++ + if (flush) { + lprintf("flush lavc buffers\n"); + /* hack: ffmpeg outputs the last frame if size=0 */ +@@ -1069,11 +1053,11 @@ + len, got_picture); + len = current - buf->content - offset; + lprintf("avcodec_decode_video: consumed_size=%d\n", len); +- ++ + flush = next_flush; + + if ((len < 0) || (len > buf->size)) { +- xprintf (this->stream->xine, XINE_VERBOSITY_DEBUG, ++ xprintf (this->stream->xine, XINE_VERBOSITY_DEBUG, + "ffmpeg_video_dec: error decompressing frame\n"); + size = 0; /* draw a bad frame and exit */ + } else { +@@ -1088,7 +1072,7 @@ + img = this->stream->video_out->get_frame (this->stream->video_out, + this->bih.biWidth, + this->bih.biHeight, +- this->aspect_ratio, ++ this->aspect_ratio, + this->output_format, + VO_BOTH_FIELDS|this->frame_flags); + free_img = 1; +@@ -1108,7 +1092,7 @@ + + img->crop_right = this->crop_right; + img->crop_bottom = this->crop_bottom; +- ++ + this->skipframes = img->draw(img, this->stream); + + if(free_img) +@@ -1121,7 +1105,7 @@ + img = this->stream->video_out->get_frame (this->stream->video_out, + this->bih.biWidth, + this->bih.biHeight, +- this->aspect_ratio, ++ this->aspect_ratio, + this->output_format, + VO_BOTH_FIELDS|this->frame_flags); + img->pts = 0; +@@ -1181,49 +1165,6 @@ + } + } + +-static int ff_vc1_find_header(ff_video_decoder_t *this, buf_element_t *buf) +-{ +- uint8_t *p = buf->content; +- +- if (!p[0] && !p[1] && p[2] == 1 && p[3] == 0x0f) { +- int i; +- +- this->context->extradata = calloc(1, buf->size); +- this->context->extradata_size = 0; +- +- for (i = 0; i < buf->size && i < 128; i++) { +- if (!p[i] && !p[i+1] && p[i+2]) { +- lprintf("00 00 01 %02x at %d\n", p[i+3], i); +- if (p[i+3] != 0x0e && p[i+3] != 0x0f) +- break; +- } +- this->context->extradata[i] = p[i]; +- this->context->extradata_size++; +- } +- +- lprintf("ff_video_decoder: found VC1 sequence header\n"); +- return 1; +- } +- +- xprintf(this->stream->xine, XINE_VERBOSITY_DEBUG, +- "ffmpeg_video_dec: VC1 extradata missing !\n"); +- return 0; +-} +- +-static int ff_check_extradata(ff_video_decoder_t *this, unsigned int codec_type, buf_element_t *buf) +-{ +- if (this->context && this->context->extradata) +- return 1; +- +- switch (codec_type) { +- case BUF_VIDEO_VC1: +- return ff_vc1_find_header(this, buf); +- default:; +- } +- +- return 1; +-} +- + #endif /* AVCODEC_HAS_REORDERED_OPAQUE */ + static void ff_handle_buffer (ff_video_decoder_t *this, buf_element_t *buf) { + uint8_t *chunk_buf = this->buf; +@@ -1235,9 +1176,6 @@ + if (this->decoder_init_mode) { + int codec_type = buf->type & 0xFFFF0000; + +- if (!ff_check_extradata(this, codec_type, buf)) +- return; +- + /* init ffmpeg decoder */ + init_video_codec(this, codec_type); + init_postprocess(this); +@@ -1256,8 +1194,7 @@ + if (this->size == 0) { + /* take over pts when we are about to buffer a frame */ + this->av_frame->reordered_opaque = ff_tag_pts(this, this->pts); +- if (this->context) /* shouldn't be NULL */ +- this->context->reordered_opaque = ff_tag_pts(this, this->pts); ++ this->context->reordered_opaque = ff_tag_pts(this, this->pts); + this->pts = 0; + } + #endif /* AVCODEC_HAS_REORDERED_OPAQUE */ +@@ -1265,7 +1202,7 @@ + /* data accumulation */ + if (buf->size > 0) { + if ((this->size == 0) && +- ((buf->size + FF_INPUT_BUFFER_PADDING_SIZE) < buf->max_size) && ++ ((buf->size + FF_INPUT_BUFFER_PADDING_SIZE) < buf->max_size) && + (buf->decoder_flags & BUF_FLAG_FRAME_END)) { + /* buf contains a complete frame */ + /* no memcpy needed */ +@@ -1278,7 +1215,7 @@ + chunk_buf = this->buf; /* ff_check_bufsize might realloc this->buf */ + + xine_fast_memcpy (&this->buf[this->size], buf->content, buf->size); +- ++ + this->size += buf->size; + lprintf("accumulate data into this->buf\n"); + } +@@ -1301,7 +1238,7 @@ + memset(&chunk_buf[this->size], 0, FF_INPUT_BUFFER_PADDING_SIZE); + + while (this->size > 0) { +- ++ + /* DV frames can be completely skipped */ + if( codec_type == BUF_VIDEO_DV && this->skipframes ) { + this->size = 0; +@@ -1322,7 +1259,7 @@ + + lprintf("consumed size: %d, got_picture: %d\n", len, got_picture); + if ((len <= 0) || (len > this->size)) { +- xprintf (this->stream->xine, XINE_VERBOSITY_DEBUG, ++ xprintf (this->stream->xine, XINE_VERBOSITY_DEBUG, + "ffmpeg_video_dec: error decompressing frame\n"); + this->size = 0; + +@@ -1366,7 +1303,7 @@ + this->bih.biHeight = this->context->height; + } + +- this->aspect_ratio = av_q2d(this->context->sample_aspect_ratio) * ++ this->aspect_ratio = av_q2d(this->context->sample_aspect_ratio) * + (double)this->bih.biWidth / (double)this->bih.biHeight; + this->aspect_ratio_prio = 2; + lprintf("ffmpeg aspect ratio: %f\n", this->aspect_ratio); +@@ -1405,7 +1342,7 @@ + img = this->stream->video_out->get_frame (this->stream->video_out, + (this->bih.biWidth + 15) & ~15, + (this->bih.biHeight + 15) & ~15, +- this->aspect_ratio, ++ this->aspect_ratio, + this->output_format, + VO_BOTH_FIELDS|this->frame_flags); + free_img = 1; +@@ -1426,17 +1363,17 @@ + img = this->stream->video_out->get_frame (this->stream->video_out, + (img->width + 15) & ~15, + (img->height + 15) & ~15, +- this->aspect_ratio, ++ this->aspect_ratio, + this->output_format, + VO_BOTH_FIELDS|this->frame_flags); + free_img = 1; + } + +- pp_postprocess(this->av_frame->data, this->av_frame->linesize, +- img->base, img->pitches, ++ pp_postprocess(this->av_frame->data, this->av_frame->linesize, ++ img->base, img->pitches, + img->width, img->height, + this->av_frame->qscale_table, this->av_frame->qstride, +- this->pp_mode, this->pp_context, ++ this->pp_mode, this->pp_context, + this->av_frame->pict_type); + + } else if (!this->av_frame->opaque) { +@@ -1476,7 +1413,7 @@ + img->top_field_first = this->av_frame->top_field_first; + + this->skipframes = img->draw(img, this->stream); +- ++ + if(free_img) + img->free(img); + } +@@ -1490,7 +1427,7 @@ + img = this->stream->video_out->get_frame (this->stream->video_out, + (this->bih.biWidth <= 0) ? 16 : ((this->bih.biWidth + 15) & ~15), + (this->bih.biHeight <= 0) ? 16 : ((this->bih.biHeight + 15) & ~15), +- this->aspect_ratio, ++ this->aspect_ratio, + this->output_format, + VO_BOTH_FIELDS|this->frame_flags); + /* set PTS to allow early syncing */ +@@ -1520,7 +1457,7 @@ + static void ff_decode_data (video_decoder_t *this_gen, buf_element_t *buf) { + ff_video_decoder_t *this = (ff_video_decoder_t *) this_gen; + +- lprintf ("processing packet type = %08x, len = %d, decoder_flags=%08x\n", ++ lprintf ("processing packet type = %08x, len = %d, decoder_flags=%08x\n", + buf->type, buf->size, buf->decoder_flags); + + if (buf->decoder_flags & BUF_FLAG_FRAMERATE) { +@@ -1529,7 +1466,7 @@ + } + + if (buf->decoder_flags & BUF_FLAG_PREVIEW) { +- ++ + ff_handle_preview_buffer(this, buf); + + } else { +@@ -1537,7 +1474,7 @@ + if (buf->decoder_flags & BUF_FLAG_SPECIAL) { + + ff_handle_special_buffer(this, buf); +- ++ + } + + if (buf->decoder_flags & BUF_FLAG_HEADER) { +@@ -1551,7 +1488,7 @@ + lprintf("aspect ratio: %f\n", this->aspect_ratio); + set_stream_info(this); + } +- } ++ } + + } else { + +@@ -1582,7 +1519,7 @@ + + if(this->context && this->decoder_ok) + avcodec_flush_buffers(this->context); +- ++ + if (this->is_mpeg12) + mpeg_parser_reset(this->mpeg_parser); + +@@ -1596,14 +1533,14 @@ + + static void ff_discontinuity (video_decoder_t *this_gen) { + ff_video_decoder_t *this = (ff_video_decoder_t *) this_gen; +- ++ + lprintf ("ff_discontinuity\n"); + this->pts = 0; + + #ifdef AVCODEC_HAS_REORDERED_OPAQUE + /* + * there is currently no way to reset all the pts which are stored in the decoder. +- * therefore, we add a unique tag (generated from pts_tag_counter) to pts (see ++ * therefore, we add a unique tag (generated from pts_tag_counter) to pts (see + * ff_tag_pts()) and wait for it to appear on returned frames. + * until then, any retrieved pts value will be reset to 0 (see ff_untag_pts()). + * when we see the tag returned, pts_tag will be reset to 0. from now on, any +@@ -1640,15 +1577,15 @@ + ff_video_decoder_t *this = (ff_video_decoder_t *) this_gen; + + lprintf ("ff_dispose\n"); +- ++ + if (this->decoder_ok) { + xine_list_iterator_t it; + AVFrame *av_frame; +- ++ + pthread_mutex_lock(&ffmpeg_lock); + avcodec_close (this->context); + pthread_mutex_unlock(&ffmpeg_lock); +- ++ + /* frame garbage collector here - workaround for buggy ffmpeg codecs that + * don't release their DR1 frames */ + while( (it = xine_list_front(this->dr1_frames)) != NULL ) +@@ -1656,7 +1593,7 @@ + av_frame = (AVFrame *)xine_list_get_value(this->dr1_frames, it); + release_buffer(this->context, av_frame); + } +- ++ + this->stream->video_out->close(this->stream->video_out, this->stream); + this->decoder_ok = 0; + } +@@ -1669,27 +1606,27 @@ + + if(this->yuv_init) + free_yuv_planes(&this->yuv); +- ++ + if( this->context ) + av_free( this->context ); + + if( this->av_frame ) + av_free( this->av_frame ); +- ++ + if (this->buf) + free(this->buf); + this->buf = NULL; +- ++ + if(this->pp_context) + pp_free_context(this->pp_context); +- ++ + if(this->pp_mode) + pp_free_mode(this->pp_mode); + + mpeg_parser_dispose(this->mpeg_parser); +- ++ + xine_list_delete(this->dr1_frames); +- ++ + free (this_gen); + } + +@@ -1715,7 +1652,7 @@ + this->context = avcodec_alloc_context(); + this->context->opaque = this; + this->context->palctrl = NULL; +- ++ + this->decoder_ok = 0; + this->decoder_init_mode = 1; + this->buf = calloc(1, VIDEOBUFSIZE + FF_INPUT_BUFFER_PADDING_SIZE); +@@ -1727,9 +1664,9 @@ + this->pp_quality = 0; + this->pp_context = NULL; + this->pp_mode = NULL; +- ++ + this->mpeg_parser = NULL; +- ++ + this->dr1_frames = xine_list_new(); + + #ifdef LOG +@@ -1755,7 +1692,7 @@ + + ff_video_class_t *this; + config_values_t *config; +- ++ + this = calloc(1, sizeof (ff_video_class_t)); + + this->decoder_class.open_plugin = ff_video_open_plugin; +@@ -1765,12 +1702,12 @@ + this->xine = xine; + + pthread_once( &once_control, init_once_routine ); +- ++ + /* Configuration for post processing quality - default to mid (3) for the + * moment */ + config = xine->config; +- +- this->pp_quality = xine->config->register_range(config, "video.processing.ffmpeg_pp_quality", 3, ++ ++ this->pp_quality = xine->config->register_range(config, "video.processing.ffmpeg_pp_quality", 3, + 0, PP_QUALITY_MAX, + _("MPEG-4 postprocessing quality"), + _("You can adjust the amount of post processing applied to MPEG-4 video.\n" +@@ -1779,8 +1716,8 @@ + "too heavy post processing can actually make the image worse by blurring it " + "too much."), + 10, pp_quality_cb, this); +- +- this->thread_count = xine->config->register_num(config, "video.processing.ffmpeg_thread_count", 1, ++ ++ this->thread_count = xine->config->register_num(config, "video.processing.ffmpeg_thread_count", 1, + _("FFmpeg video decoding thread count"), + _("You can adjust the number of video decoding threads which FFmpeg may use.\n" + "Higher values should speed up decoding but it depends on the codec used " +@@ -1789,7 +1726,7 @@ + "A change of this setting will take effect with playing the next stream."), + 10, thread_count_cb, this); + +- this->skip_loop_filter_enum = xine->config->register_enum(config, "video.processing.ffmpeg_skip_loop_filter", 0, ++ this->skip_loop_filter_enum = xine->config->register_enum(config, "video.processing.ffmpeg_skip_loop_filter", 0, + (char **)skip_loop_filter_enum_names, + _("Skip loop filter"), + _("You can control for which frames the loop filter shall be skipped after " +@@ -1800,7 +1737,7 @@ + "A change of this setting will take effect with playing the next stream."), + 10, skip_loop_filter_enum_cb, this); + +- this->choose_speed_over_accuracy = xine->config->register_bool(config, "video.processing.ffmpeg_choose_speed_over_accuracy", 0, ++ this->choose_speed_over_accuracy = xine->config->register_bool(config, "video.processing.ffmpeg_choose_speed_over_accuracy", 0, + _("Choose speed over specification compliance"), + _("You may want to allow speed cheats which violate codec specification.\n" + "Cheating may speed up decoding but can also lead to decoding artefacts.\n" +@@ -1810,14 +1747,14 @@ + return this; + } + +-static uint32_t wmv8_video_types[] = { ++static uint32_t wmv8_video_types[] = { + BUF_VIDEO_WMV8, +- 0 ++ 0 + }; + +-static uint32_t wmv9_video_types[] = { ++static uint32_t wmv9_video_types[] = { + BUF_VIDEO_WMV9, +- 0 ++ 0 + }; + + decoder_info_t dec_info_ffmpeg_video = { diff --git a/source/xap/xine-lib/xine-lib.SlackBuild b/source/xap/xine-lib/xine-lib.SlackBuild index 84c6703f1..50bc2edee 100755 --- a/source/xap/xine-lib/xine-lib.SlackBuild +++ b/source/xap/xine-lib/xine-lib.SlackBuild @@ -22,17 +22,26 @@ # Version on the tarball -VERSION=1.1.16.3 +VERSION=1.1.17 # Version used in the source directory to cd into -DIRVER=1.1.16.3 +DIRVER=1.1.17 # Version used for the Slackware package -PKGVER=1.1.16.3 +PKGVER=1.1.17 + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i686 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi # I would use "-march=i486 -mtune=i686" here as usual, but with XINE it's all or nothing. # I'd rather have it work well for the i686/Athlon crowd than suck for everyone. -ARCH=${ARCH:-x86_64} TARGET=${TARGET:-$ARCH-pc-linux-gnu} -BUILD=${BUILD:-6} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} @@ -53,6 +62,10 @@ rm -rf xine-lib-$VERSION tar xvf $CWD/xine-lib-$VERSION.tar.bz2 || exit 1 cd xine-lib-$DIRVER || exit 1 +# revert to xine-lib-1.1.16.3 ffmpeg video decoder... +# the new one doesn't compile: +zcat $CWD/xine-lib-1.1.17.ff.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/xap/xine-ui/xine-ui.SlackBuild b/source/xap/xine-ui/xine-ui.SlackBuild index 1dd61f1f6..61650223f 100755 --- a/source/xap/xine-ui/xine-ui.SlackBuild +++ b/source/xap/xine-ui/xine-ui.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.99.5 +VERSION=${VERSION:-$(echo xine-ui-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} # I would use "-march=i486 -mcpu=i686" here as usual, but with XINE it's all or nothing. # I'd rather have it work well for the i686/Athlon crowd than suck for everyone. -ARCH=${ARCH:-x86_64} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i686 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi TARGET=${TARGET:-$ARCH-pc-linux-gnu} -BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:-" -j7 "} @@ -41,6 +50,8 @@ rm -rf xine-ui-$VERSION tar xvf $CWD/xine-ui-$VERSION.tar.bz2 || exit 1 cd xine-ui-$VERSION || exit 1 +zcat $CWD/xine-ui.png14.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/xap/xine-ui/xine-ui.png14.diff b/source/xap/xine-ui/xine-ui.png14.diff new file mode 100644 index 000000000..35a06513c --- /dev/null +++ b/source/xap/xine-ui/xine-ui.png14.diff @@ -0,0 +1,11 @@ +--- ./src/xitk/Imlib-light/load.c.orig 2003-07-14 17:44:10.000000000 -0500 ++++ ./src/xitk/Imlib-light/load.c 2010-02-19 13:41:27.000000000 -0600 +@@ -193,7 +193,7 @@ + return 0; + fread(buf, 1, 8, f); + rewind(f); +- return (int)png_check_sig(buf, 8); ++ return (int)(png_sig_cmp(buf, 0, 8) == 0); + } + + ImlibImage * Imlib_load_image(ImlibData * id, char *file) { diff --git a/source/xap/xmms/xmms.SlackBuild b/source/xap/xmms/xmms.SlackBuild index b11afde61..042d8310e 100755 --- a/source/xap/xmms/xmms.SlackBuild +++ b/source/xap/xmms/xmms.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,17 @@ VERSION=1.2.11 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-3} +BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -38,8 +46,14 @@ elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" ARCHOPTS="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + ARCHOPTS="" fi +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-xmms @@ -68,7 +82,7 @@ CXXFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --localstatedir=/var/lib \ --disable-static \ - --with-ipv6 \ + --enable-ipv6 \ $ARCHOPTS \ --build=$ARCH-slackware-linux @@ -79,6 +93,10 @@ make install DESTDIR=$PKG || exit 1 mkdir -p $PKG/usr/share/applications cat $CWD/xmms.desktop > $PKG/usr/share/applications/xmms.desktop +# Add an icon for the menus: +mkdir -p $PKG/usr/share/pixmaps +cat $CWD/xmms.png > $PKG/usr/share/pixmaps/xmms.png + mkdir -p $PKG/usr/doc/xmms-$VERSION cp -a \ ABOUT-NLS AUTHORS COPYING FAQ INSTALL NEWS README TODO \ diff --git a/source/xap/xmms/xmms.png b/source/xap/xmms/xmms.png Binary files differnew file mode 100644 index 000000000..7ff618709 --- /dev/null +++ b/source/xap/xmms/xmms.png diff --git a/source/xap/xpaint/xpaint.SlackBuild b/source/xap/xpaint/xpaint.SlackBuild index c353c7384..367df5ee0 100755 --- a/source/xap/xpaint/xpaint.SlackBuild +++ b/source/xap/xpaint/xpaint.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,20 @@ PKGNAM=xpaint -VERSION=${VERSION:-2.7.8.1} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-2.8.16} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} CWD=$(pwd) @@ -43,6 +53,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP @@ -54,8 +67,6 @@ if [ "$ARCH" = "x86_64" ]; then # Make it detect Xaw3d: sed -i -e "s#usr/lib/#usr/lib${LIBDIRSUFFIX}/#g" $( grep -lr 'usr/lib/' * ) fi -zcat ${CWD}/xpaint_xaw3d_no_scroll_mode.diff.gz | patch -p1 || exit 1 -#zcat ${CWD}/xpaint_2.7.8.1-1.2.diff.gz | patch -p1 || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . @@ -109,9 +120,17 @@ fi # Add a documentation directory: mkdir -p ${PKG}/usr/doc/xpaint-$VERSION cp -a \ - README README.PNG README.old TODO \ + GPL* INSTALL README* TODO* \ ${PKG}/usr/doc/xpaint-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > ${PKG}/install/slack-desc diff --git a/source/xap/xpaint/xpaint_2.7.8.1-1.2.diff b/source/xap/xpaint/xpaint_2.7.8.1-1.2.diff deleted file mode 100644 index 1f8cc82e1..000000000 --- a/source/xap/xpaint/xpaint_2.7.8.1-1.2.diff +++ /dev/null @@ -1,47 +0,0 @@ ---- ./misc.h.orig 2005-08-15 14:50:05.000000000 -0500 -+++ ./misc.h 2007-05-10 16:46:23.000000000 -0500 -@@ -24,7 +24,7 @@ - long random(void); - #endif - --#if !defined(__VMS) & !defined(linux) & !defined(__EMX__) & !defined(__FreeBSD__) & !defined(__CYGWIN__) -+#if !defined(__VMS) & !defined(linux) & !defined(__EMX__) & !defined(__FreeBSD__) & !defined(__CYGWIN__) & !defined(__GLIBC__) - #if defined(BSD4_4) || defined(HPArchitecture) || defined(SGIArchitecture) || defined(_AIX) || defined(_SCO_DS) - void srandom(unsigned int); - #else ---- ./Local.config.orig 2005-04-30 16:33:14.000000000 -0500 -+++ ./Local.config 2007-05-10 16:47:02.000000000 -0500 -@@ -132,11 +132,11 @@ - XCOMM You must have the XPM library. - XCOMM Make sure the path name to the library is correct. - --XPM_LIB = -L/usr/X11R6/lib -lXpm -+XPM_LIB = -lXpm - - XCOMM Make sure this points to the location of the 'xpm.h' file. - --XPM_INCLUDE = -I/usr/X11R6/include/X11 -+XPM_INCLUDE = -I/usr/include/X11 - - - DEPENDFLAGS = -I./bitmaps ---- ./configure.orig 2005-06-03 07:26:11.000000000 -0500 -+++ ./configure 2007-05-10 16:46:23.000000000 -0500 -@@ -7,7 +7,7 @@ - echo "(looking for Xaw, Xaw3d, Xaw95, neXtaw)" - echo "" - else -- WIDGETS=`echo $1 | tr [a:z] [A:Z]` -+ WIDGETS=`echo $1` - fi - - if test "$WIDGETS" = "" ; then -@@ -54,7 +54,7 @@ - fi - fi - --if test "$WIDGETS" = "XAW3DG" ; then -+if test "$WIDGETS" = "xaw3dg" ; then - ln -sf /usr/include/X11/Xaw3d xaw_incdir - echo "XAWLIB_DEFINES = -DXAW3D -DXAW3DG" - echo "XAWLIB_DEFINES = -DXAW3D -DXAW3DG" > Local.xawdefs diff --git a/source/xap/xpaint/xpaint_xaw3d_no_scroll_mode.diff b/source/xap/xpaint/xpaint_xaw3d_no_scroll_mode.diff deleted file mode 100644 index f89b12c1d..000000000 --- a/source/xap/xpaint/xpaint_xaw3d_no_scroll_mode.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- xpaint-2.7.8.1/misc.c.orig 2005-04-24 11:57:52.000000000 +0000 -+++ xpaint-2.7.8.1/misc.c 2008-11-06 21:43:46.000000000 +0000 -@@ -671,7 +671,7 @@ - } - else return; - if (sb == None) return; --#ifdef XAW3DG -+#if defined(XAW3DG) && defined(XAW_ARROW_SCROLLBARS) - if (((ScrollbarWidget)sb)->scrollbar.scroll_mode == 2 /* if scroll continuous */ - || LookAhead (sb, event)) - return; diff --git a/source/xap/xpdf/VendorP.h.buggy.diff b/source/xap/xpdf/VendorP.h.buggy.diff deleted file mode 100644 index a8c91ab4b..000000000 --- a/source/xap/xpdf/VendorP.h.buggy.diff +++ /dev/null @@ -1,19 +0,0 @@ ---- ./VendorP.h.orig 2007-02-14 02:45:33.000000000 -0600 -+++ ./VendorP.h 2007-08-08 14:22:17.000000000 -0500 -@@ -76,6 +76,8 @@ - XtPointer extension; /* pointer to extension record */ - } VendorShellClassPart; - -+struct VendorShellClassRec; -+/* - typedef struct _VendorShellClassRec { - CoreClassPart core_class; - CompositeClassPart composite_class; -@@ -85,6 +87,7 @@ - } VendorShellClassRec; - - externalref VendorShellClassRec vendorShellClassRec; -+*/ - - /* New fields for the vendor shell widget. */ - diff --git a/source/xap/xpdf/doinst.sh b/source/xap/xpdf/doinst.sh new file mode 100644 index 000000000..03a6ae859 --- /dev/null +++ b/source/xap/xpdf/doinst.sh @@ -0,0 +1,19 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/xpdfrc.new + +if [ -x /usr/bin/update-desktop-database ]; then + /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1 +fi + diff --git a/source/xap/xpdf/xpdf-arabic.diff b/source/xap/xpdf/lang/xpdf-arabic.diff index a6dfcf1f5..a6dfcf1f5 100644 --- a/source/xap/xpdf/xpdf-arabic.diff +++ b/source/xap/xpdf/lang/xpdf-arabic.diff diff --git a/source/xap/xpdf/xpdf-chinese-simplified.diff b/source/xap/xpdf/lang/xpdf-chinese-simplified.diff index adb125a49..adb125a49 100644 --- a/source/xap/xpdf/xpdf-chinese-simplified.diff +++ b/source/xap/xpdf/lang/xpdf-chinese-simplified.diff diff --git a/source/xap/xpdf/xpdf-chinese-traditional.diff b/source/xap/xpdf/lang/xpdf-chinese-traditional.diff index 71d35ee5d..71d35ee5d 100644 --- a/source/xap/xpdf/xpdf-chinese-traditional.diff +++ b/source/xap/xpdf/lang/xpdf-chinese-traditional.diff diff --git a/source/xap/xpdf/xpdf-cyrillic.diff b/source/xap/xpdf/lang/xpdf-cyrillic.diff index ec841961e..ec841961e 100644 --- a/source/xap/xpdf/xpdf-cyrillic.diff +++ b/source/xap/xpdf/lang/xpdf-cyrillic.diff diff --git a/source/xap/xpdf/xpdf-greek.diff b/source/xap/xpdf/lang/xpdf-greek.diff index fe47d4434..fe47d4434 100644 --- a/source/xap/xpdf/xpdf-greek.diff +++ b/source/xap/xpdf/lang/xpdf-greek.diff diff --git a/source/xap/xpdf/xpdf-hebrew.diff b/source/xap/xpdf/lang/xpdf-hebrew.diff index e7d091d00..e7d091d00 100644 --- a/source/xap/xpdf/xpdf-hebrew.diff +++ b/source/xap/xpdf/lang/xpdf-hebrew.diff diff --git a/source/xap/xpdf/xpdf-japanese.diff b/source/xap/xpdf/lang/xpdf-japanese.diff index 5c1878fe8..5c1878fe8 100644 --- a/source/xap/xpdf/xpdf-japanese.diff +++ b/source/xap/xpdf/lang/xpdf-japanese.diff diff --git a/source/xap/xpdf/xpdf-korean.diff b/source/xap/xpdf/lang/xpdf-korean.diff index 632fc2145..632fc2145 100644 --- a/source/xap/xpdf/xpdf-korean.diff +++ b/source/xap/xpdf/lang/xpdf-korean.diff diff --git a/source/xap/xpdf/xpdf-latin2.diff b/source/xap/xpdf/lang/xpdf-latin2.diff index 88ce2444e..88ce2444e 100644 --- a/source/xap/xpdf/xpdf-latin2.diff +++ b/source/xap/xpdf/lang/xpdf-latin2.diff diff --git a/source/xap/xpdf/xpdf-thai.diff b/source/xap/xpdf/lang/xpdf-thai.diff index 75b9b1a28..75b9b1a28 100644 --- a/source/xap/xpdf/xpdf-thai.diff +++ b/source/xap/xpdf/lang/xpdf-thai.diff diff --git a/source/xap/xpdf/xpdf-turkish.diff b/source/xap/xpdf/lang/xpdf-turkish.diff index ec7fe79f0..ec7fe79f0 100644 --- a/source/xap/xpdf/xpdf-turkish.diff +++ b/source/xap/xpdf/lang/xpdf-turkish.diff diff --git a/source/xap/xpdf/xpdf-3.02pl1.patch b/source/xap/xpdf/patches/xpdf-3.02pl1.patch index cd42fb962..cd42fb962 100644 --- a/source/xap/xpdf/xpdf-3.02pl1.patch +++ b/source/xap/xpdf/patches/xpdf-3.02pl1.patch diff --git a/source/xap/xpdf/xpdf-3.02pl2.patch b/source/xap/xpdf/patches/xpdf-3.02pl2.patch index ab9e3c671..ab9e3c671 100644 --- a/source/xap/xpdf/xpdf-3.02pl2.patch +++ b/source/xap/xpdf/patches/xpdf-3.02pl2.patch diff --git a/source/xap/xpdf/xpdf-3.02pl3.patch b/source/xap/xpdf/patches/xpdf-3.02pl3.patch index b5988805f..b5988805f 100644 --- a/source/xap/xpdf/xpdf-3.02pl3.patch +++ b/source/xap/xpdf/patches/xpdf-3.02pl3.patch diff --git a/source/xap/xpdf/patches/xpdf-3.02pl4.patch b/source/xap/xpdf/patches/xpdf-3.02pl4.patch new file mode 100644 index 000000000..082d11750 --- /dev/null +++ b/source/xap/xpdf/patches/xpdf-3.02pl4.patch @@ -0,0 +1,282 @@ +*** xpdf-3.02.orig/xpdf/Stream.cc Fri Jul 24 14:30:46 2009 +--- xpdf-3.02/xpdf/Stream.cc Mon Oct 5 11:07:49 2009 +*************** +*** 323,328 **** +--- 323,332 ---- + } else { + imgLineSize = nVals; + } ++ if (width > INT_MAX / nComps) { ++ // force a call to gmallocn(-1,...), which will throw an exception ++ imgLineSize = -1; ++ } + imgLine = (Guchar *)gmallocn(imgLineSize, sizeof(Guchar)); + imgIdx = nVals; + } +*** xpdf-3.02.orig/xpdf/PSOutputDev.cc Tue Feb 27 14:05:52 2007 +--- xpdf-3.02/xpdf/PSOutputDev.cc Fri Oct 2 12:38:58 2009 +*************** +*** 4301,4307 **** + width, -height, height); + + // allocate a line buffer +! lineBuf = (Guchar *)gmalloc(4 * width); + + // set up to process the data stream + imgStr = new ImageStream(str, width, colorMap->getNumPixelComps(), +--- 4301,4307 ---- + width, -height, height); + + // allocate a line buffer +! lineBuf = (Guchar *)gmallocn(width, 4); + + // set up to process the data stream + imgStr = new ImageStream(str, width, colorMap->getNumPixelComps(), +diff -r -c xpdf-3.02.orig/splash/Splash.cc xpdf-3.02/splash/Splash.cc +*** xpdf-3.02.orig/splash/Splash.cc Tue Feb 27 14:05:52 2007 +--- xpdf-3.02/splash/Splash.cc Fri Aug 14 14:05:08 2009 +*************** +*** 12,17 **** +--- 12,18 ---- + + #include <stdlib.h> + #include <string.h> ++ #include <limits.h> + #include "gmem.h" + #include "SplashErrorCodes.h" + #include "SplashMath.h" +*************** +*** 1912,1918 **** + xq = w % scaledWidth; + + // allocate pixel buffer +! pixBuf = (SplashColorPtr)gmalloc((yp + 1) * w); + + // initialize the pixel pipe + pipeInit(&pipe, 0, 0, state->fillPattern, NULL, state->fillAlpha, +--- 1913,1922 ---- + xq = w % scaledWidth; + + // allocate pixel buffer +! if (yp < 0 || yp > INT_MAX - 1) { +! return splashErrBadArg; +! } +! pixBuf = (SplashColorPtr)gmallocn(yp + 1, w); + + // initialize the pixel pipe + pipeInit(&pipe, 0, 0, state->fillPattern, NULL, state->fillAlpha, +*************** +*** 2208,2216 **** + xq = w % scaledWidth; + + // allocate pixel buffers +! colorBuf = (SplashColorPtr)gmalloc((yp + 1) * w * nComps); + if (srcAlpha) { +! alphaBuf = (Guchar *)gmalloc((yp + 1) * w); + } else { + alphaBuf = NULL; + } +--- 2212,2223 ---- + xq = w % scaledWidth; + + // allocate pixel buffers +! if (yp < 0 || yp > INT_MAX - 1 || w > INT_MAX / nComps) { +! return splashErrBadArg; +! } +! colorBuf = (SplashColorPtr)gmallocn(yp + 1, w * nComps); + if (srcAlpha) { +! alphaBuf = (Guchar *)gmallocn(yp + 1, w); + } else { + alphaBuf = NULL; + } +diff -r -c xpdf-3.02.orig/splash/SplashErrorCodes.h xpdf-3.02/splash/SplashErrorCodes.h +*** xpdf-3.02.orig/splash/SplashErrorCodes.h Tue Feb 27 14:05:52 2007 +--- xpdf-3.02/splash/SplashErrorCodes.h Fri Aug 14 14:03:46 2009 +*************** +*** 29,32 **** +--- 29,34 ---- + + #define splashErrSingularMatrix 8 // matrix is singular + ++ #define splashErrBadArg 9 // bad argument ++ + #endif +*** xpdf-3.02.orig/splash/SplashBitmap.cc Tue Feb 27 14:05:52 2007 +--- xpdf-3.02/splash/SplashBitmap.cc Wed Aug 19 14:55:39 2009 +*************** +*** 11,16 **** +--- 11,17 ---- + #endif + + #include <stdio.h> ++ #include <limits.h> + #include "gmem.h" + #include "SplashErrorCodes.h" + #include "SplashBitmap.h" +*************** +*** 27,56 **** + mode = modeA; + switch (mode) { + case splashModeMono1: +! rowSize = (width + 7) >> 3; + break; + case splashModeMono8: +! rowSize = width; + break; + case splashModeRGB8: + case splashModeBGR8: +! rowSize = width * 3; + break; + #if SPLASH_CMYK + case splashModeCMYK8: +! rowSize = width * 4; + break; + #endif + } +! rowSize += rowPad - 1; +! rowSize -= rowSize % rowPad; +! data = (SplashColorPtr)gmalloc(rowSize * height); + if (!topDown) { + data += (height - 1) * rowSize; + rowSize = -rowSize; + } + if (alphaA) { +! alpha = (Guchar *)gmalloc(width * height); + } else { + alpha = NULL; + } +--- 28,75 ---- + mode = modeA; + switch (mode) { + case splashModeMono1: +! if (width > 0) { +! rowSize = (width + 7) >> 3; +! } else { +! rowSize = -1; +! } + break; + case splashModeMono8: +! if (width > 0) { +! rowSize = width; +! } else { +! rowSize = -1; +! } + break; + case splashModeRGB8: + case splashModeBGR8: +! if (width > 0 && width <= INT_MAX / 3) { +! rowSize = width * 3; +! } else { +! rowSize = -1; +! } + break; + #if SPLASH_CMYK + case splashModeCMYK8: +! if (width > 0 && width <= INT_MAX / 4) { +! rowSize = width * 4; +! } else { +! rowSize = -1; +! } + break; + #endif + } +! if (rowSize > 0) { +! rowSize += rowPad - 1; +! rowSize -= rowSize % rowPad; +! } +! data = (SplashColorPtr)gmallocn(height, rowSize); + if (!topDown) { + data += (height - 1) * rowSize; + rowSize = -rowSize; + } + if (alphaA) { +! alpha = (Guchar *)gmallocn(width, height); + } else { + alpha = NULL; + } +*** xpdf-3.02.orig/xpdf/XRef.cc Tue Feb 27 14:05:52 2007 +--- xpdf-3.02/xpdf/XRef.cc Tue Oct 13 11:57:24 2009 +*************** +*** 52,57 **** +--- 52,59 ---- + // generation 0. + ObjectStream(XRef *xref, int objStrNumA); + ++ GBool isOk() { return ok; } ++ + ~ObjectStream(); + + // Return the object number of this object stream. +*************** +*** 67,72 **** +--- 69,75 ---- + int nObjects; // number of objects in the stream + Object *objs; // the objects (length = nObjects) + int *objNums; // the object numbers (length = nObjects) ++ GBool ok; + }; + + ObjectStream::ObjectStream(XRef *xref, int objStrNumA) { +*************** +*** 80,85 **** +--- 83,89 ---- + nObjects = 0; + objs = NULL; + objNums = NULL; ++ ok = gFalse; + + if (!xref->fetch(objStrNum, 0, &objStr)->isStream()) { + goto err1; +*************** +*** 105,110 **** +--- 109,121 ---- + goto err1; + } + ++ // this is an arbitrary limit to avoid integer overflow problems ++ // in the 'new Object[nObjects]' call (Acrobat apparently limits ++ // object streams to 100-200 objects) ++ if (nObjects > 1000000) { ++ error(-1, "Too many objects in an object stream"); ++ goto err1; ++ } + objs = new Object[nObjects]; + objNums = (int *)gmallocn(nObjects, sizeof(int)); + offsets = (int *)gmallocn(nObjects, sizeof(int)); +*************** +*** 161,170 **** + } + + gfree(offsets); + + err1: + objStr.free(); +- return; + } + + ObjectStream::~ObjectStream() { +--- 172,181 ---- + } + + gfree(offsets); ++ ok = gTrue; + + err1: + objStr.free(); + } + + ObjectStream::~ObjectStream() { +*************** +*** 837,842 **** +--- 848,858 ---- + delete objStr; + } + objStr = new ObjectStream(this, e->offset); ++ if (!objStr->isOk()) { ++ delete objStr; ++ objStr = NULL; ++ goto err; ++ } + } + objStr->getObject(e->gen, num, obj); + break; diff --git a/source/xap/xpdf/xpdf-resizefix.diff b/source/xap/xpdf/patches/xpdf-resizefix.diff index 4be7feb0a..4be7feb0a 100644 --- a/source/xap/xpdf/xpdf-resizefix.diff +++ b/source/xap/xpdf/patches/xpdf-resizefix.diff diff --git a/source/xap/xpdf/xpdf_3.02-1.3.diff b/source/xap/xpdf/patches/xpdf_3.02-1.3.diff index 6a769e5c9..6a769e5c9 100644 --- a/source/xap/xpdf/xpdf_3.02-1.3.diff +++ b/source/xap/xpdf/patches/xpdf_3.02-1.3.diff diff --git a/source/xap/xpdf/xpdfrc.diff b/source/xap/xpdf/patches/xpdfrc.diff index f005414e0..f005414e0 100644 --- a/source/xap/xpdf/xpdfrc.diff +++ b/source/xap/xpdf/patches/xpdfrc.diff diff --git a/source/xap/xpdf/xpdf.SlackBuild b/source/xap/xpdf/xpdf.SlackBuild index d07fb9aa6..5acf7c06e 100755 --- a/source/xap/xpdf/xpdf.SlackBuild +++ b/source/xap/xpdf/xpdf.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,20 @@ VERSION=3.02 -PATCHLEVEL=pl3 -ARCH=${ARCH:-x86_64} +PATCHLEVEL=pl4 +BUILD=${BUILD:-2} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=1 + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -36,25 +46,23 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-xpdf + rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf xpdf-$VERSION -tar xvf $CWD/xpdf-$VERSION.tar.gz || exit 1 +tar xvf $CWD/xpdf-$VERSION.tar.?z || exit 1 cd xpdf-$VERSION || exit 1 -zcat $CWD/xpdf-resizefix.diff.gz | patch -p1 --verbose || exit 1 -cat $CWD/xpdf-3.02pl1.patch | patch -p1 --verbose || exit 1 -cat $CWD/xpdf-3.02pl2.patch | patch -p1 --verbose || exit 1 -cat $CWD/xpdf-3.02pl3.patch | patch -p1 --verbose || exit 1 -zcat $CWD/xpdf_3.02-1.3.diff.gz | patch -p1 --verbose || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -62,7 +70,14 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -zcat $CWD/xpdfrc.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit +zcat $CWD/patches/xpdf-resizefix.diff.gz | patch -p1 --verbose || exit 1 +cat $CWD/patches/xpdf-3.02pl1.patch | patch -p1 --verbose || exit 1 +cat $CWD/patches/xpdf-3.02pl2.patch | patch -p1 --verbose || exit 1 +cat $CWD/patches/xpdf-3.02pl3.patch | patch -p1 --verbose || exit 1 +cat $CWD/patches/xpdf-3.02pl4.patch | patch -p1 --verbose || exit 1 +zcat $CWD/patches/xpdf_3.02-1.3.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/patches/xpdfrc.diff.gz | patch -p1 --verbose || exit 1 + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ @@ -71,71 +86,68 @@ CXXFLAGS="$SLKCFLAGS" \ --mandir=/usr/man \ --sysconfdir=/etc \ --with-gzip \ - --with-freetype2-includes=/usr/include/freetype2 + --with-freetype2-includes=/usr/include/freetype2 \ + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -mkdir -p $PKG/etc -cat doc/sample-xpdfrc > $PKG/etc/xpdfrc -mkdir -p $PKG/usr/share/applications -cat $CWD/xpdf.desktop > $PKG/usr/share/applications/xpdf.desktop -mkdir -p $PKG/usr/share/icons -cat xpdf/xpdfIcon.xpm > $PKG/usr/share/icons/xpdfIcon.xpm +chmod 0755 $PKG/usr/bin/* +gzip -9 $PKG/usr/man/man?/* -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# We'll use the versions of these from the poppler derived work (if they exist here): +( cd $PKG/usr/bin + rm -f pdfinfo pdftops pdftoppm pdftohtml pdftotext pdfimages pdffonts + cd $PKG/usr/man/man1 + for file in pdfinfo pdftops pdftoppm pdftohtml pdftotext pdfimages pdffonts ; do + rm -f ${file}.1.gz + done +) -chmod 755 $PKG/usr/bin/* -gzip -9 $PKG/usr/man/man?/* +# Don't clobber /etc/xpdfrc +mkdir -p $PKG/etc +cat doc/sample-xpdfrc > $PKG/etc/xpdfrc +mv $PKG/etc/xpdfrc $PKG/etc/xpdfrc.new -mkdir -p $PKG/usr/doc/xpdf-$VERSION -cp -a \ - ANNOUNCE CHANGES COPYING INSTALL README \ - $PKG/usr/doc/xpdf-$VERSION -chmod 644 $PKG/usr/doc/xpdf-$VERSION/* +# Add desktop menu entry and icon +mkdir -p $PKG/usr/share/{applications,pixmaps} +cat $CWD/xpdf.desktop > $PKG/usr/share/applications/xpdf.desktop +cat xpdf/xpdfIcon.xpm > $PKG/usr/share/pixmaps/xpdfIcon.xpm # Add additional language support: for language in xpdf-arabic xpdf-chinese-simplified xpdf-chinese-traditional xpdf-cyrillic xpdf-greek xpdf-hebrew xpdf-japanese xpdf-korean xpdf-latin2 xpdf-thai xpdf-turkish ; do rm -rf ${language} - tar xf $CWD/${language}.tar.gz + tar xf $CWD/lang/${language}.tar.gz ( cd ${language} - zcat $CWD/${language}.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 + zcat $CWD/lang/${language}.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 chown -R root:root . find . -type f -exec chmod 644 {} \; - cat add-to-xpdfrc >> $PKG/etc/xpdfrc + cat add-to-xpdfrc >> $PKG/etc/xpdfrc.new mkdir -p $PKG/usr/share/xpdf/$(echo ${language} | cut -f2- -d -) cp -a * $PKG/usr/share/xpdf/$(echo ${language} | cut -f2- -d -) ) done +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/xpdf-$VERSION +cp -a \ + ANNOUNCE CHANGES COPYING INSTALL README \ + $PKG/usr/doc/xpdf-$VERSION +chmod 0644 $PKG/usr/doc/xpdf-$VERSION/* + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + mkdir -p $PKG/install -mv $PKG/etc/xpdfrc $PKG/etc/xpdfrc.new -cat << EOF > $PKG/install/doinst.sh -#!/bin/sh -config() { - NEW="\$1" - OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r \$OLD ]; then - mv \$NEW \$OLD - elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy - rm \$NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} -config etc/xpdfrc.new -EOF cat $CWD/slack-desc > $PKG/install/slack-desc - -# We'll use the versions of these from the poppler derived work (if they exist here): -( cd $PKG/usr/bin - rm -f pdfinfo pdftops pdftoppm pdftohtml pdftotext pdfimages pdffonts - cd $PKG/usr/man/man1 - for file in pdfinfo pdftops pdftoppm pdftohtml pdftotext pdfimages pdffonts ; do - rm -f ${file}.1.gz - done -) +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh # Build the package: cd $PKG diff --git a/source/xap/xpdf/xpdf.desktop b/source/xap/xpdf/xpdf.desktop index b8f4c9b17..51d1a5a6d 100644 --- a/source/xap/xpdf/xpdf.desktop +++ b/source/xap/xpdf/xpdf.desktop @@ -1,5 +1,4 @@ [Desktop Entry] -Encoding=UTF-8 Name=X PDF Name[bn]=à¦à¦•à§à¦¸ পি-ডি-à¦à¦« Name[de]=X-PDF @@ -11,7 +10,7 @@ Name[ko]=Xìš© PDF Name[mn]=X-PDF Name[nds]=X-PDF Name[te]=à°Žà°•à±à°¸à± పిడిఎఫౠ-MimeType=application/pdf +MimeType=application/pdf; GenericName=PDF Viewer GenericName[af]=Pdf Aansig GenericName[ar]=عارض الملÙات PDF @@ -93,8 +92,7 @@ GenericName[zh_TW]=PDF æª¢è¦–ç¨‹å¼ GenericName[zu]=Umbukisi we-PDF Exec=xpdf Icon=xpdfIcon -Path= Type=Application Terminal=false X-KDE-StartupNotify=false -Categories=Graphics;PDFViewer; +Categories=Graphics; diff --git a/source/xap/xsane/xsane.SlackBuild b/source/xap/xsane/xsane.SlackBuild index f8d730124..444700c51 100755 --- a/source/xap/xsane/xsane.SlackBuild +++ b/source/xap/xsane/xsane.SlackBuild @@ -22,8 +22,17 @@ VERSION=0.996 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -37,6 +46,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG diff --git a/source/xap/xscreensaver/xscreensaver.SlackBuild b/source/xap/xscreensaver/xscreensaver.SlackBuild index 4eb2fdfd4..6d01ced00 100755 --- a/source/xap/xscreensaver/xscreensaver.SlackBuild +++ b/source/xap/xscreensaver/xscreensaver.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=5.08 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo xscreensaver-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi +NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) diff --git a/source/xap/xv/xv-3.10a-enhancements.20070520-20081216.diff b/source/xap/xv/xv-3.10a-enhancements.20070520-20081216.diff new file mode 100644 index 000000000..c9b5528f5 --- /dev/null +++ b/source/xap/xv/xv-3.10a-enhancements.20070520-20081216.diff @@ -0,0 +1,293 @@ + 20070621 + fixed improper ClearCode termination condition in GIF decoder (JZ); fixed + some minor inconsistencies in Makefile (GRR) + - xv-joe-zbiciak-20070621-gif-decoder-bugfix.dif + + 20080121 + removed duplicate "XDestroyWindow(theDisp, pngW);" in xvmisc.c (IMC); fixed + empty-filename click-and-crash bug in xvdir.c (IMC, DB) + - xv-ian-collier-20080118-crash-fixes.msg + - xv-david-bath-20080901-empty-filename-save-crash-fix.dif + + 20081205 + reverted xvxwd.c to SJT's version (bug reported by Jari Ruusu) + + 20081216 + fixed crash-bug in IFF decoder (EP) + - xv-elmar-plischke-20081216-xviff-crash-fix.dif + + + +diff -ru ../test3.20070520.stock/xv-3.10a/xv.h ./xv.h +--- ../test3.20070520.stock/xv-3.10a/xv.h 2007-05-20 22:23:33.000000000 -0700 ++++ ./xv.h 2008-12-16 09:45:00.000000000 -0800 +@@ -16,8 +16,9 @@ + /* GRR 2nd public jumbo F+E patches: 20050410 */ + /* GRR 3rd public jumbo F+E patches: 20050501 */ + /* GRR 4th public jumbo F+E patch: 20070520 */ +-#define REVDATE "version 3.10a-jumboFix+Enh of 20070520" +-#define VERSTR "3.10a-20070520" ++/* GRR 5th public jumbo F+E patch: 200xxxxx (probably mid-2009) */ ++#define REVDATE "version 3.10a-jumboFix+Enh of 20081216 (interim!)" ++#define VERSTR "3.10a-20081216" + + /* + * uncomment the following, and modify for your site, but only if you've + + + +diff -ru ../test3.20070520.stock/xv-3.10a/xvdir.c ./xvdir.c +--- ../test3.20070520.stock/xv-3.10a/xvdir.c 2007-05-20 22:23:33.000000000 -0700 ++++ ./xvdir.c 2008-01-21 13:02:38.000000000 -0800 +@@ -539,8 +539,9 @@ + return -1; + } + +- /* handle clicks inside the filename box */ +- if (x > 80 && ++ /* handle clicks inside the filename box, but only when box is not empty */ ++ if (enPos > stPos && ++ x > 80 && + y > dList.y + (int) dList.h + 30 && + x < 80 + DNAMWIDE+6 && + y < dList.y + (int) dList.h + 30 + LINEHIGH+5) { + + + +diff -ru ../test3.20070520.stock/xv-3.10a/xvgif.c ./xvgif.c +--- ../test3.20070520.stock/xv-3.10a/xvgif.c 2007-05-20 22:23:33.000000000 -0700 ++++ ./xvgif.c 2007-06-21 09:36:40.000000000 -0700 +@@ -700,7 +700,7 @@ + * associated output code on the output queue. + */ + +- while (CurCode > BitMask) { ++ while (CurCode >= ClearCode) { /* Joe Zbiciak fix, 20070621 */ + if (OutCount > 4096) break; /* corrupt file */ + OutCode[OutCount++] = Suffix[CurCode]; + CurCode = Prefix[CurCode]; + + + +diff -ru ../test3.20070520.stock/xv-3.10a/xvmisc.c ./xvmisc.c +--- ../test3.20070520.stock/xv-3.10a/xvmisc.c 2007-05-20 22:23:33.000000000 -0700 ++++ ./xvmisc.c 2008-01-21 12:57:29.000000000 -0800 +@@ -561,10 +561,6 @@ + if (mgcsfxW) XDestroyWindow(theDisp, mgcsfxW); + #endif + +-#ifdef HAVE_PNG +- if (pngW) XDestroyWindow(theDisp, pngW); +-#endif +- + /* if NOT using stdcmap for images, free stdcmap */ + if (colorMapMode != CM_STDCMAP) { + int j; + + + +[This one reverts xvxwd.c to the pre-2007 SJT version, which actually worked...] + +diff -ru ../test3.20070520.stock/xv-3.10a/xvxwd.c ./xvxwd.c +--- ../test3.20070520.stock/xv-3.10a/xvxwd.c 2007-05-20 22:23:33.000000000 -0700 ++++ ./xvxwd.c 2008-12-06 00:30:44.000000000 -0800 +@@ -19,6 +19,12 @@ + */ + + #include "xv.h" ++#include <limits.h> /* for CHAR_BIT */ ++ ++/* SJT: just in case ... */ ++#ifndef CHAR_BIT ++# define CHAR_BIT 8 ++#endif + + + /***************************** x11wd.h *****************************/ +@@ -83,9 +89,14 @@ + static int writebiglong PARM((FILE *, CARD32)); + #endif + ++static void getcolorshift PARM((CARD32, int *, int *)); /* SJT */ ++ ++/* SJT: for 16bpp and 24bpp shifts */ ++static int red_shift_right, red_justify_left, ++ grn_shift_right, grn_justify_left, ++ blu_shift_right, blu_justify_left; + static byte *pic8, *pic24; +-static CARD32 red_mask, green_mask, blue_mask; +-static int red_shift, green_shift, blue_shift; ++static CARD32 red_mask, grn_mask, blu_mask; + static int bits_per_item, bits_used, bit_shift, + bits_per_pixel, bits_per_rgb; + static char buf[4]; +@@ -189,38 +200,34 @@ + return 0; + } + +- switch (bits_per_pixel) { +- case 16: +- case 24: +- case 32: +- ; +- default: +- xwdError("True/Direct supports only 16, 24, and 32 bits"); +- return 0; +- } ++ for (row=0; row<rows; row++) { ++ for (col=0, xP=pic24+(row*cols*3); col<cols; col++) { ++ CARD32 ul; + +- if (byte_order == MSBFirst) { +- for (row=0; row<rows; row++) { +- for (col=0, xP=pic24+(row*cols*3); col<cols; col++) { +- register CARD32 ul = getpixnum(ifp); +- +- *xP++ = ul >> red_shift & red_mask ; +- *xP++ = ul >> green_shift & green_mask; +- *xP++ = ul >> blue_shift & blue_mask ; +- }; +- for (col=0; col<padright; col++) getpixnum(ifp); +- } +- } else { +- for (row=0; row<rows; row++) { +- for (col=0, xP=pic24+(row*cols*3); col<cols; col++) { +- register CARD32 ul = getpixnum(ifp); +- +- *xP++ = ul >> blue_shift & blue_mask ; +- *xP++ = ul >> green_shift & green_mask; +- *xP++ = ul >> red_shift & red_mask ; +- }; +- for (col=0; col<padright; col++) getpixnum(ifp); ++ ul = getpixnum(ifp); ++ switch (bits_per_pixel) { ++ case 16: ++ case 24: ++ case 32: ++ /* SJT: shift all the way to the right and then shift left. The ++ pairs of shifts could be combined. There will be two right and ++ one left shift, but it's unknown which will be which. It seems ++ easier to do the shifts (which might be 0) separately than to ++ have a complex set of tests. I believe this is independent of ++ byte order but I have no way to test. ++ */ ++ *xP++ = ((ul & red_mask) >> red_shift_right) << red_justify_left; ++ *xP++ = ((ul & grn_mask) >> grn_shift_right) << grn_justify_left; ++ *xP++ = ((ul & blu_mask) >> blu_shift_right) << blu_justify_left; ++ break; ++ ++ default: ++ xwdError("True/Direct supports only 16, 24, and 32 bits"); ++ return 0; ++ } + } ++ ++ for (col=0; col<padright; col++) getpixnum(ifp); + } + + pinfo->type = PIC24; +@@ -445,28 +452,18 @@ + (i.e., 3 bytes, no alpha/padding) */ + + +- bits_used = bits_per_item; ++ bits_used = bits_per_item; + + if (bits_per_pixel == sizeof(pixel_mask) * 8) pixel_mask = (CARD32) -1; + else pixel_mask = (1 << bits_per_pixel) - 1; + +- red_mask = h11P->red_mask; +- green_mask = h11P->grn_mask; +- blue_mask = h11P->blu_mask; +- +- red_shift = blue_shift = green_shift = 0; +- while (!(red_mask & 1)) { +- red_mask >>= 1; +- ++red_shift; +- } +- while (!(blue_mask & 1)) { +- blue_mask >>= 1; +- ++blue_shift; +- } +- while (!(green_mask & 1)) { +- green_mask >>= 1; +- ++green_shift; +- } ++ red_mask = h11P->red_mask; ++ grn_mask = h11P->grn_mask; ++ blu_mask = h11P->blu_mask; ++ ++ getcolorshift(red_mask, &red_shift_right, &red_justify_left); ++ getcolorshift(grn_mask, &grn_shift_right, &grn_justify_left); ++ getcolorshift(blu_mask, &blu_shift_right, &blu_justify_left); + + byteP = (char *) buf; + shortP = (CARD16 *) buf; +@@ -476,6 +473,45 @@ + } + + ++/* SJT: figure out the proper shifts */ ++static void getcolorshift (CARD32 mask, int *rightshift, int *leftshift) ++{ ++ int lshift, rshift; ++ unsigned int uu; ++ ++ if (mask == 0) ++ { ++ *rightshift = *leftshift = 0; ++ return; ++ } ++ ++ uu = mask; ++ lshift = rshift = 0; ++ while ((uu & 0xf) == 0) ++ { ++ rshift += 4; ++ uu >>= 4; ++ } ++ while ((uu & 1) == 0) ++ { ++ rshift++; ++ uu >>= 1; ++ } ++ ++ while (uu != 0) ++ { ++ if (uu & 1) ++ { ++ lshift++; ++ uu >>= 1; ++ } ++ } ++ *rightshift = rshift; ++ *leftshift = CHAR_BIT * sizeof(pixel) - lshift; ++ return; ++} ++ ++ + /******************************/ + static CARD32 getpixnum(file) + FILE* file; + + + +diff -ru ../test3.20070520.stock/xv-3.10a/xviff.c ./xviff.c +--- ../test3.20070520.stock/xv-3.10a/xviff.c 2007-05-13 17:50:59.000000000 -0700 ++++ ./xviff.c 2008-12-16 09:20:25.000000000 -0800 +@@ -73,6 +73,7 @@ + int BMHDok, CMAPok, CAMGok; + int bmhd_width, bmhd_height, bmhd_bitplanes, bmhd_transcol; + int i, j, k, lineskip, colors, fmt; ++ int npixels = 0; /* needs to be initialized _outside_ while-loop */ + byte bmhd_masking, bmhd_compression; + long chunkLen, camg_viewmode; + byte *databuf, *dataptr, *cmapptr, *picptr, *pic, *bodyptr; +@@ -138,7 +139,6 @@ + BODY chunk was found or dataptr ran over end of file */ + + while ((rv<0) && (dataptr < (databuf + filesize))) { +- int npixels = 0; + chunkLen = (iff_getlong(dataptr + 4) + 1) & 0xfffffffe; /* make even */ + + if (strncmp((char *) dataptr, "BMHD", (size_t) 4)==0) { /* BMHD chunk? */ diff --git a/source/xap/xv/xv-3.10a-jumbo-README.txt b/source/xap/xv/xv-3.10a-jumbo-README.txt index 63627ddff..00b1c3e4e 100644 --- a/source/xap/xv/xv-3.10a-jumbo-README.txt +++ b/source/xap/xv/xv-3.10a-jumbo-README.txt @@ -1,6 +1,6 @@ -These are the latest versions of the XV jumbo patches I originally created -in February 2000 (but never distributed) and eventually updated and released -in May 2004, prompted by a discussion on LWN (http://lwn.net/Articles/76391/). +This is the latest version of the XV jumbo patches I originally created in +February 2000 (but never distributed) and eventually updated and released in +May 2004, prompted by a discussion on LWN (http://lwn.net/Articles/76391/). Information about the patches, updates to the patches, and the patches themselves can all be found here: @@ -10,16 +10,14 @@ themselves can all be found here: (Use the "Subscribe to new releases" link on the latter page if you want to be notified of new versions automatically; trivial registration required.) -These two patches incorporate all of the fix- and enhancement-patches -available from John's XV site (http://www.trilon.com/xv/downloads.html -and ftp://ftp.trilon.com/pub/xv/patches/), plus a number of my own fixes -and additions, plus quite a few from other people--though not all of the -ones I'd intended to, due to lack of time after dealing with the latest -set of security issues (one of which I discovered, sigh). They're still -not fully complete, and it's possible they never will be, but I do plan -to continue tinkering with them whenever the mood strikes--and I may even -release them publicly on rare occasions. (At the current rate, it looks -like once a year may be the best we can hope for...we'll see.) +These patches incorporate all of the fix- and enhancement-patches available +from John's XV site (http://www.trilon.com/xv/downloads.html and +ftp://ftp.trilon.com/pub/xv/patches/), plus a number of my own fixes and +additions (security-related and otherwise), plus quite a few from other +people. They're still not fully complete, and it's probable they never +will be, but I do plan to continue tinkering with them whenever the mood +strikes--and I may even release them publicly on rare occasions. (At the +current rate, once every few years may be the best we can hope for....) Also be aware that several other people have had the same idea over the years. Ones I've found, more or less by accident, include: @@ -45,43 +43,58 @@ years. Ones I've found, more or less by accident, include: - Kyoichiro Suda <sudakyo fat.coara.or.jp> http://www.coara.or.jp/~sudakyo/XV_jp.html -I very much doubt that this is an exhaustive list. So far, most of the -other patch-sets appear not to be as extensive or as up-to-date as my own, -particularly now that the (very large) "Japanese extension" patches are -incorporated--big thanks to Werner Fink of SuSE for that! +This is not an exhaustive list (e.g., Jörgen Grahn also had one). So far, +most of the other patch-sets appear not to be as extensive or as up-to-date +as my own, particularly now that the (very large) "Japanese extension" patches +are incorporated--big thanks to Werner Fink of SuSE for that! Below I summarize the component patches that are encompassed by my jumbo -bugfixes and jumbo enhancements patches. Unfortunately, some of my own -additions never saw the light of day as standalone patches, but considering -the number of overlaps (collisions) already implicit in this list, it would -have been difficult to accomplish even if I'd had the time. +bugfixes and jumbo enhancements patches, circa 2005. (As of 2007, they're +distributed as a single monster-patch, and the "component patches" are now +listed in the changelog section at the bottom of this file.) Unfortunately, +some of my own additions never saw the light of day as standalone patches, +but considering the number of overlaps (collisions) already implicit in the +list, that would have been difficult to accomplish even if I'd had the time. -Here's a quick guide to the "third-party" credits in the lists below: +Here's a quick guide to the "third-party" credits in the lists and changelog +below: AAC = Andrey A. Chernov [ache] (http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-ab) AD = Andreas Dilger (adilger clusterfs.com) AL = Alexander Lehmann (lehmann usa.net) + AS = Alexey Spiridonov (http://www-math.mit.edu/~lesha/) AT = Anthony Thyssen (http://www.cit.gu.edu.au/~anthony/) + BR = Bruno Rohee (http://bruno.rohee.com/) DAC = David A. Clunie (http://www.dclunie.com/xv-pcd.html) + EAJ = Erling A. Jacobsen (linuxcub email.dk) EK = Egmont Koblinger (egmont users.sourceforge.net) - GRR = Greg Roelofs (http://pobox.com/~newt/) + FG = Fabian Greffrath (fabian debian-unofficial.org) + GRR = Greg Roelofs (http://pobox.com/~newt/greg_contact.html) GV = Guido Vollbeding (http://sylvana.net/guido/) IM = IKEMOTO Masahiro (ikeyan airlab.cs.ritsumei.ac.jp) + JC = John Cooper (john.cooper third-harmonic.com) JCE = John C. Elliott (http://www.seasip.demon.co.uk/ZX/zxdload.html) + JDB = John D. Baker (http://mylinuxisp.com/~jdbaker/) + JG = Jörgen Grahn (jgrahn algonet.se) JHB = John H. Bradley, of course (http://www.trilon.com/xv/) JPD = Jean-Pierre Demailly (http://www-fourier.ujf-grenoble.fr/~demailly/) JR = John Rochester (http://www.freebsd.org/cgi/query-pr.cgi?pr=2920) (also http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-af, -ag) + JRK = James Roberts Kirkpatrick (uwyo.edu) JZ = Joe Zbiciak (http://spatula-city.org/~im14u2c/) KS = Kyoichiro Suda (http://www.coara.or.jp/~sudakyo/XV_jp.html) LCN = Landon Curt "chongo" Noll (http://www.isthe.com/chongo/) LJ = Larry Jones (lawrence.jones ugs.com) PBJ = Peter Jordan (http://www.ibiblio.org/pub/Linux/apps/graphics/viewers/X/) PSV = Pawel S. Veselov (http://manticore.2y.net/wbmp.html) + RAC = Ross Combs (rocombs cs.nmsu.edu) + RJH = Robin Humble (http://www.cita.utoronto.ca/~rjh/) SB = Sean Borman (http://www.nd.edu/~sborman/software/xvwheelmouse.html) SJT = TenThumbs (tenthumbs cybernex.net) + SBM = Scott B. Marovich (formerly marovich hpl.hp.com) TA = Tim Adye (http://hepwww.rl.ac.uk/Adye/xv-psnewstyle.html) + TAR = Tim Ramsey (tar pobox.com) TI = Tetsuya INOUE (tin329 chino.it.okayama-u.ac.jp) TO = Tavis Ormandy (taviso gentoo.org) WF = Werner Fink (http://www.suse.de/~werner/) @@ -90,86 +103,79 @@ Other credits are as listed on the XV Downloads page or in the respective patches (e.g., the jp-extension patches or within the PNG patch). Finally, please note that these patches have not been blessed by John Bradley -in any way (although I copied him on the May 2004 announcement--no response -at that time). Nor have I personally tested every change and feature! (See -the BIG SCARY WARNING below for further caveats.) In other words, they're -both completely unofficial and completely unguaranteed. But they seem to -work for me. (And when they don't, I fix 'em. Eventually, anyway... ;-) ) +in any way (although I copied him on the May 2004 announcement and wrote to +him again in May 2005), unless you count Debian's redistribution permission +(Daniel Kirchheimer, 5 Dec 2005). Nor have I personally tested every change +and feature! (See the BIG SCARY WARNING below for further caveats.) In other +words, they're both completely unofficial and completely unguaranteed. But +they seem to work for me. (And when they don't, I try to fix 'em--eventually, +anyway... ;-) ) -One further "final" note: as of this release, I am no longer updating the -fixes patch; new stuff (including fixes) now appears only in the enhancements -one. It simply became too much of a timesink to maintain parallel trees--not -to mention parallel makefiles (generic/public vs. local/personal, old vs. -new libjpeg/libtiff) and xv.h (unregistered/public vs. registered/personal), -particularly when some fixes came about while working on an enhancement and -others were provided by third parties relative to the previous fix+enh state. -Hence the mismatched "20050410" date on the fixes patch. - -GRR 20050501 +Greg Roelofs, 20070520 +http://pobox.com/~newt/greg_contact.html How to build ------------ -The following assumes you, the user, already have the libtiff,[1] -libjpeg,[2] libpng,[3] and zlib[4] libraries downloaded, patched (if -necessary), compiled, and installed, not to mention a C compiler and -the bzip2,[5] tar,[6] patch,[7] and make[8] utilities. You should also -have downloaded the original XV 3.10a source distribution from the XV -Downloads page[9] and be able to edit its Makefile and config.h files -as indicated in the INSTALL file. Finally, you should know what a -Unix(-style) command line is, where to find one, and how to wield it -with abandon (or at least with adult supervision)--and preferably not -as the root user until the make install step. (A filesystem is a -terrible thing to waste.) +The following assumes you, the user, already have the libtiff,[1] libjpeg,[2] +libpng,[3] zlib,[4] and JasPer[5] libraries downloaded, patched (if necessary), +compiled, and installed, not to mention a C compiler and the bzip2,[6] tar,[7] +patch,[8] and make[9] utilities. You should also have downloaded the original +XV 3.10a source distribution from the XV Downloads page[10] and be able to edit +its Makefile and config.h files as indicated in the INSTALL file. (Editing +the Makefile will also allow you to disable some of the third-party libraries +if you wish.) Finally, you should know what a Unix(-style) command line is, +where to find one, and how to wield it with abandon (or at least with adult +supervision)--and preferably not as the root user until the "make install" +step. (A filesystem is a terrible thing to waste.) [1] http://www.remotesensing.org/libtiff/ [2] http://www.ijg.org/ [3] http://www.libpng.org/pub/png/libpng.html [4] http://www.zlib.net/ - [5] http://sources.redhat.com/bzip2/ - [6] http://www.gnu.org/directory/devel/specific/tar.html - [7] http://www.gnu.org/directory/devel/specific/patch.html - [8] http://www.gnu.org/directory/devel/specific/make.html - [9] http://www.trilon.com/xv/downloads.html#src-distrib + [5] http://www.ece.uvic.ca/~mdadams/jasper/ + [6] http://sources.redhat.com/bzip2/ + [7] http://www.gnu.org/directory/devel/specific/tar.html + [8] http://www.gnu.org/directory/devel/specific/patch.html + [9] http://www.gnu.org/directory/devel/specific/make.html + [10] http://www.trilon.com/xv/downloads.html#src-distrib +-------------------------------------------------------------------------+ | | | BIG SCARY WARNING | | | -| These patches work for Greg (and parts of them apparently work for | +| These patches work for Greg (and parts of them reportedly work for | | various other people), and so far Greg's CPU still computes and his | -| hard disks haven't been wiped. But there's no guarantee that that | +| hard disks haven't been wiped. But there's no guarantee that this | | will be the case for you! In particular, not every incorporated patch | | has been explicitly tested, nor has every possible subcase of the | -| explicitly tested subset. (Read that again; it's grammatical.) Nor are | -| these patches officially blessed by John Bradley in any way. In other | -| words, if you use these patches, you do so at your own risk. (Greg | -| doesn't believe there are any serious problems remaining, but then, | -| what programmer ever does? Bugs happen.) | +| explicitly tested subset. (Read that again; it's grammatical.) Nor | +| are these patches officially blessed by John Bradley in any way. In | +| other words, if you use these patches, you do so at your own risk. | +| (Greg doesn't believe there are any serious problems remaining, but | +| then, what programmer ever does? Bugs happen.) | | | +-------------------------------------------------------------------------+ Assuming you have the prerequisites out of the way and aren't scared off by the Big Scary Warning, here's the build procedure: - bzip2 -dc xv-3.10a-jumbo-patches-20050501.tar.bz2 | tar xvf - - (or tar xvzf xv-3.10a-jumbo-patches-20050501.tar.gz) + tar xvzf xv-3.10a-jumbo-patches-20070520.tar.gz + (or: gzip -dc xv-3.10a-jumbo-patches-20070520.tar.gz | tar xvf - ) tar xvzf xv-3.10a.tar.gz cd xv-3.10a - patch -p1 < ../xv-3.10a-jumbo-fix-patch-20050410.txt - - [optional] patch -p1 < ../xv-3.10a-jumbo-enh-patch-20050501.txt + patch -p1 < ../xv-3.10a-jumbo-fix-enh-patch-20070520.txt edit Makefile and config.h as directed in INSTALL file (in particular, ensure paths to external libraries and header files are correct) make - ./xv your_favorite_image your_other_favorite_image etc. + ./xv your_favorite_image your_other_favorite_image etc. If everything seems to be working to your satisfaction, go ahead and install: @@ -179,12 +185,14 @@ If everything seems to be working to your satisfaction, go ahead and install: become root if necessary (e.g., type su) make install + (or: sudo make install) That wasn't so hard, was it? -Summary of incorporated and unincorporated patches --------------------------------------------------- +Summary of incorporated and unincorporated patches (through 20050501) +--------------------------------------------------------------------- +(See the ChangeLog at the bottom for more recent incorporated patches.) fixes ((*) = listed on XV Downloads page, (f) = on ftp site only): @@ -270,7 +278,7 @@ enhancements ((*) = listed on XV Downloads page, (<who>) = third-party): 20050501: - xv-3.10a-bmpfix.patch (WF) [*SECURITY*] - xv310a-jp-extension-rev5.3.3.tar.gz (TI, IM, ..., WF) - (adds support for MAG, MAKI, Pi, PIC, and PIC2 formats[*]; "magic suffix" + (adds support for MAG, MAKI, Pi, PIC, and PIC2 formats[!]; "magic suffix" detection/conversion; MacBinary prefixes; archives as virtual filesystems; multilingual text viewer [though not Unicode]; etc.) - xv-3.10a-yaos.dif (WF, TO) [*SECURITY*] @@ -288,7 +296,7 @@ enhancements ((*) = listed on XV Downloads page, (<who>) = third-party): - PATCH.stat (LJ) - PATCH.thumbs (LJ) - xv-startgrab-imake-hips.patch (JPD) - ("hips" portion only; adds support for HIPS image format[*]) + ("hips" portion only; adds support for HIPS image format[!]) - xv-3.10a-formatstr.patch (KS) - xv-3.10a-shortsleep.patch (KS) - xv-3.10a-locale-linux.patch (KS) @@ -298,8 +306,7 @@ enhancements ((*) = listed on XV Downloads page, (<who>) = third-party): - xv-3.10a-xvexecpath.patch (but disabled pending fixes) (KS) - xv-3.10a-zeroquit.patch (KS, GRR) - -[*] Note that all six of these formats may still suffer from exploitable heap +[!] Note that all six of these formats may still suffer from exploitable heap overflows [*SECURITY*] when decoding images with large (possibly invalid) dimensions; as a result, they are DISABLED by default. (Search for "GRR POSSIBLE OVERFLOW / FIXME" comments in xvmag.c, xvmaki.c, xvpi.c, xvpic.c, @@ -334,9 +341,11 @@ not (yet?) included: - xv-3.10a+jp-extension-rev5.3.3+FLmask.v2.1+png+misc.patch ["mask" support] - - xv-psnewstyle.patch (TA) [coming later in 2005?] + - xv-psnewstyle.patch (TA) [coming "soon"?] - xv-3.10a.patch.linux (PBJ) [maybe use vdcomp.c changes?] - xvxpm-anthony-thyssen.c (AT) ["slate grey" bug already gone?] + - xv-geoff-kuenning-iconsize-slideshow.patch [var. icons; full-screen slides] + - xv-scott-marovich-20070214-xvtiff.c.patch6.unified [TIFF CMYK support] - stuff in xv/unsupt: -rw-r--r-- 30527 Dec 22 1994 FITS.rite @@ -360,9 +369,8 @@ not finished (and/or even started ;-) ): - (better) fix for never-ending pile of SLOW popups when viewing TIFFs with unknown tags (or truncated/corrupted images) - fix for minor .Z inefficiency in xv.c ("FIXME") - - fix for filename entry-field mouse/cursor bogosity - (want at least positioning to work; preferably also select/cut/paste) - - fix for spacebar-for-next-image getting stuck at first text file + - fix for filename entry-field mouse/cursor deficiencies + (positioning fixed 20070104 by Ross Combs; would like select/cut/paste, too) - fix for .ppm.gz "disk leak" [can't reproduce...already fixed?] (maybe occurs only if filesystem is already nearly full? bad .gz?) @@ -440,3 +448,112 @@ ChangeLog suffix" (xv_mgcsfx) config dir (enh); added PREFIX and DESTDIR support to Makefile (enh); fixed handling of zero-length files and other text-viewer failures (enh) + + 20050528 + conditionally added missing alloca.h to xvpcd.c (required if alloca() is + a macro and alloca.h not included in stdlib.h, for example); fixed bogus + __S_IWRITE introduced in 20050501 release; fixed Makefile "install" target + (mkdir, chmod); fixed bug in MUST macro in xvwbmp.c; fixed prototype + warnings in xvevent.c, xvpcd.c (JRK, GRR) + - xv-3.10a-jimkirk-fixes.patch + + 20050630 + fixed broken mkdir(.xvpics) introduced in 20050501 release (RJH, GRR); + tweaked GUNZIP config for OpenBSD (GRR) + - xv-3.10a-xvpics-mkdir-fix.patch + + 20051014 + fixed longstanding xvevent.c typo (wasJpegUp -> wasPngUp) that caused build + failure if no JPEG support (TAR) + + 20051019 + fixed Darwin (Mac OS X) build error in xv.h and vdcomp.c due to lack of + malloc.h (JDB) + + 20070210 + fixed minor grammos (GRR); promoted PNG to first position, demoted GIF to + third (GRR); changed internal type of default image to PNG (GRR); increased + max files again, to 65536 (GRR) + + 20070310 + incorporated JPEG-2000 patch (SBM, GRR); added manual fax options for + unrecognized G3 images (SBM); relaxed 30-byte minimum file size (SBM) + - http://www.ece.uvic.ca/~mdadams/jasper/software/xv-patches + + 20070318 + incorporated 16bps raw (binary) PPM patch (define ASSUME_RAW_PPM_LSB_FIRST + for old behavior) (RAC, GRR); updated format list, web sites in xv man page + (GRR); fixed Makefile "install" target to create any necessary directories + (RAC, GRR); fixed GIF decoder bug (sizes of global, local color tables + different) (GRR) + - xv-ross-combs-ppm-16bps-rawbits.patch + + 20070325 + fixed invalid gamma assumption in PNG decoder (=> progressive color changes + over load/save cycles) (GRR) + + 20070328 + fixed animated-GIF /tmp/xvpgXXXXXX droppings (GRR) + + 20070331 + fixed PNG duplicate-palette-entries bug (GRR) + + 20070415 + incorporated EXIF-preserve patch (GHK); added missing JP2/JPC VS bits code + (GRR); added extended-warning options to CCOPTS (RAC); added "const" to + huge number of function args (RAC, GRR); made more effectively static + functions officially static (RAC); added mouse-clickability (but not + selectability) to text-entry fields (RAC); fixed window positioning (race + conditions?) under some virtual window managers (e.g., tvtwm) (RAC); + removed explicit paths for external (de)compressors (GRR, RAC) + - xv-geoff-kuenning-jpeg-exif-preserve.patch + - xv-ross-combs-20070104.diff + + 20070422 + incorporated function-key-scripts patch (see contrib/fnkey-scripts) (AS); + fixed man-page-section extensions ("1", not "l" or "1X") (FG); switched to + more sensible install paths for docs (FG); added Fedora Core build script + (see contrib/fedora) (JC); fixed VS to switch from move-mode to copy-mode + if source dir is read-only (EAJ); extended VS incremental-search mode (EAJ) + - xv-alexey-spiridonov-20070116-fnkey-scripts.tar.bz2 + - xv-fabian-greffrath-20070215-debian-04-manpages.dpatch + - xv-fabian-greffrath-20070215-debian-03-makefiles.dpatch + - xv-john-cooper-Build-FC5-script.sh + - xv-erling-jacobsen-20060617-incr-search.patch + + 20070428 + modified install to include README.jumbo in docs (GRR); incorporated PNG + no-stdio patch (SBM); fixed XWD endianness support, improved performance + (replaces SJT 16/24-bit fix) (SBM) + - xv-scott-marovich-20070214-xvpng.diff + - xv-scott-marovich-20070214-xvxwd.c.patch + + 20070506 + added JPEG CMYK support (SBM); fixed TIFF (and others?) /tmp/xvpgXXXXXX + droppings (GRR); added VS clipboard support (JG) + - xv-scott-marovich-20070214-xvjpeg.c.patch + - xv-jurgen-grahn-20051127-schnauzer-clip.patch + + 20070512 + inverted handling of malloc.h header file to require NEED_MALLOC_H macro + for those few systems that actually need it (GRR) + + 20070513 + fixed GCC 4.1.x warnings (GRR); next round of const cleanup (GRR); fixed + minor TIFF memleak (GRR) + + 20070514 + fixed TIFF YCbCr reference black/white levels (SBM); added option to use + libjpeg YCbCr-to-RGB conversion for TIFF images (SBM, GRR) + - xv-scott-marovich-20070214-xvtiff.c.patch2.unified + - xv-scott-marovich-20070214-xvtiff.c.patch3.unified + + 20070519 + fixed handling of multi-page JPEG-compressed TIFFs (old or new) (SBM); + added TIFF YCbCr separated-color-plane support (may require libtiff + patch(es) to tif_ojpeg.c and/or tif_jpeg.c) (SBM) + - xv-scott-marovich-20070214-xvtiff.c.patch4.unified + - xv-scott-marovich-20070214-xvtiff.c.patch5.unified + + 20070520 + updated README.jumbo diff --git a/source/xap/xv/xv-3.10a-jumbo-enh-patch-20050501.txt b/source/xap/xv/xv-3.10a-jumbo-additions.diff index d78b601a9..8f398ddf2 100644 --- a/source/xap/xv/xv-3.10a-jumbo-enh-patch-20050501.txt +++ b/source/xap/xv/xv-3.10a-jumbo-additions.diff @@ -1,832 +1,288 @@ -diff : xv-3.10a-jumbo-enh-patch-20050501.txt - -This is a unified diff. It should be applied (using Larry Wall's "patch" -program) to the XV 3.10a sources AFTER the jumbo-fixes patch has already -been applied. - -diffs below: - Imakefile - Makefile - Makefile.std - README.jumbo - README.pcd - bggen.c - bits/br_bzip2 - bits/br_mag - bits/br_maki - bits/br_mgcsfx - bits/br_pcd - bits/br_pi - bits/br_pic - bits/br_pic2 - bits/br_png - bits/br_zx - config.h - tiff/Makefile - vdcomp.c - xcmap.c - xv.c - xv.h - xv_mgcsfx.sample - xvbmp.c - xvbrowse.c - xvctrl.c - xvdial.c - xvdir.c - xvevent.c - xvfits.c - xvgam.c - xvgif.c - xvgrab.c - xvhips.c - xvhips.h - xvimage.c - xvinfo.c - xvjpeg.c - xvmag.c - xvmaki.c - xvmgcsfx.c - xvmisc.c - xvml.c - xvml.h - xvpbm.c - xvpcd.c - xvpds.c - xvpi.c - xvpic.c - xvpic2.c - xvpng.c - xvpopup.c - xvps.c - xvrle.c - xvroot.c - xvsmooth.c - xvtext.c - xvtiff.c - xvtiffwr.c - xvvd.c - xvwbmp.c - xvxpm.c - xvzx.c - - -diff -ruN xv-3.10a-bugfixes/Imakefile xv-3.10a-enhancements/Imakefile ---- xv-3.10a-bugfixes/Imakefile 1995-01-13 12:24:01.000000000 -0800 -+++ xv-3.10a-enhancements/Imakefile 2005-04-17 14:04:22.000000000 -0700 -@@ -104,6 +104,11 @@ - SGI = -Dsgi - #endif - -+/* install directory of xv_mgcsfx.sample. */ -+MGCSFXDIR = $(LIBDIR) -+/* Directory of default configuration file. */ -+MGCSFX = -DMGCSFXDIR=\"$(MGCSFXDIR)\" -+ - - - -@@ -137,6 +142,8 @@ - #if defined(SCOArchitecture) - SCO= -Dsco -DPOSIX -DNO_RANDOM - SYS_LIBRARIES= -lm -lc -lx -+#elif defined(HPArchitecture) -+SYS_LIBRARIES= -lm -lV3 - #else - SYS_LIBRARIES= -lm - #endif -@@ -147,7 +154,7 @@ - - DEFINES= $(SCO) $(UNIX) $(NODIRENT) $(VPRINTF) $(TIMERS) \ - $(HPUX7) $(JPEG) $(TIFF) $(PDS) $(DXWM) $(RAND) \ -- $(BACKING_STORE) $(BSDTYPES) $(SGI) -+ $(BACKING_STORE) $(BSDTYPES) $(SGI) $(MGCSFX) - - INCLUDES = $(JPEGINCLUDE) $(TIFFINCLUDE) - -@@ -157,7 +164,9 @@ - xvdial.c xvgraf.c xvsunras.c xvjpeg.c xvps.c xvpopup.c xvdflt.c \ - xvtiff.c xvtiffwr.c xvpds.c xvrle.c xviris.c xvgrab.c vprintf.c \ - xvbrowse.c xvtext.c xvpcx.c xviff.c xvtarga.c xvxpm.c xvcut.c \ -- xvxwd.c xvfits.c -+ xvxwd.c xvfits.c xvpng.c xvzx.c xvwbmp.c xvpcd.c \ -+ xvmag.c xvpic.c xvmaki.c xvpi.c xvpic2.c xvvd.c xvmgcsfx.c \ -+ xvml.c - - OBJS1 = xv.o xvevent.o xvroot.o xvmisc.o xvimage.o xvcolor.o xvsmooth.o \ - xv24to8.o xvgif.o xvpm.o xvinfo.o xvctrl.o xvscrl.o xvalg.o \ -@@ -165,7 +174,9 @@ - xvdial.o xvgraf.o xvsunras.o xvjpeg.o xvps.o xvpopup.o xvdflt.o \ - xvtiff.o xvtiffwr.o xvpds.o xvrle.o xviris.o xvgrab.o vprintf.o \ - xvbrowse.o xvtext.o xvpcx.o xviff.o xvtarga.o xvxpm.o xvcut.o \ -- xvxwd.o xvfits.o -+ xvxwd.o xvfits.o xvpng.o xvzx.o xvwbmp.o xvpcd.o \ -+ xvmag.o xvpic.o xvmaki.o xvpi.o xvpic2.o xvvd.o xvmgcsfx.o \ -+ xvml.o - - SRCS2= bggen.c - OBJS2= bggen.o -@@ -266,6 +277,8 @@ - InstallManPageLong(docs/xvp2p,$(MANDIR),xvpictoppm) - InstallManPageLong(docs/vdcomp,$(MANDIR),vdcomp) - -+InstallNonExecFile(xv_mgcsfx.sample,$(MGCSFXDIR)) -+ - tar: - tar cf xv.tar Makefile* Imakefile *.c *.h bits docs \ - docs unsupt vms $(JPEGDIR) $(TIFFDIR) $(MISC) -diff -ruN xv-3.10a-bugfixes/Makefile xv-3.10a-enhancements/Makefile ---- xv-3.10a-bugfixes/Makefile 2005-04-06 08:17:13.000000000 -0700 -+++ xv-3.10a-enhancements/Makefile 2005-05-01 10:23:32.000000000 -0700 -@@ -41,10 +41,14 @@ - - - ### Installation locations --BINDIR = /usr/local/bin --MANDIR = /usr/local/man/man1 -+PREFIX = /usr/local -+BINDIR = $(PREFIX)/bin -+MANDIR = $(PREFIX)/man/man1 - MANSUF = 1 --LIBDIR = /usr/local/lib -+DOCDIR = $(PREFIX)/doc/xv-3.10a -+LIBDIR = $(PREFIX)/lib/xv -+SYSCONFDIR = $(PREFIX)/etc -+DESTDIR = - - - buildit: all -@@ -59,13 +63,59 @@ - ### on your machine, *COMMENT OUT* the following lines - ### - JPEG = -DDOJPEG --JPEGDIR = jpeg --JPEGINC = -I$(JPEGDIR) --JPEGLIB = $(JPEGDIR)/libjpeg.a --$(JPEGDIR)/jconfig.h: -- cd $(JPEGDIR) ; ./configure CC='$(CC)' --$(JPEGLIB): $(JPEGDIR)/jconfig.h -- cd $(JPEGDIR) ; make -+#JPEGDIR = jpeg -+JPEGDIR = /usr -+#JPEGDIR = /usr/local -+#JPEGDIR = ../../libjpeg -+### -+JPEGINC = -I$(JPEGDIR)/include -+#JPEGINC = -I$(JPEGDIR) -+### -+JPEGLIB = -L$(JPEGDIR)/lib -ljpeg -+#JPEGLIB = -L$(JPEGDIR) -ljpeg -+#JPEGLIB = $(JPEGDIR)/libjpeg.a -+### -+### this is intended to build the ancient version (5a) that's included in the -+### "jpeg" subdir of XV, not an arbitrary copy of libjpeg: -+### -+#$(JPEGDIR)/jconfig.h: -+# cd $(JPEGDIR) ; ./configure CC='$(CC)' -+#$(JPEGLIB): $(JPEGDIR)/jconfig.h -+# cd $(JPEGDIR) ; make -+ -+ -+### -+### if, for whatever reason, you're unable to get the PNG library to compile -+### on your machine, *COMMENT OUT* the following lines -+### -+PNG = -DDOPNG -+PNGDIR = /usr -+#PNGDIR = /usr/local -+#PNGDIR = ../../libpng -+### -+PNGINC = -I$(PNGDIR)/include -+#PNGINC = -I$(PNGDIR) -+### -+PNGLIB = -L$(PNGDIR)/lib -lpng -+#PNGLIB = -L$(PNGDIR) -lpng -+#PNGLIB = $(PNGDIR)/libpng.a -+ -+ -+### -+### if, for whatever reason, you're unable to get both the PNG library and -+### (newer versions of) the TIFF library to compile on your machine, *COMMENT -+### OUT* the following lines -+### -+ZLIBDIR = /usr -+#ZLIBDIR = /usr/local -+#ZLIBDIR = ../../zlib -+### -+ZLIBINC = -I$(ZLIBDIR)/include -+#ZLIBINC = -I$(ZLIBDIR) -+### -+ZLIBLIB = -L$(ZLIBDIR)/lib -lz -+#ZLIBLIB = -L$(ZLIBDIR) -lz -+#ZLIBLIB = $(ZLIBDIR)/libz.a - - - ### -@@ -80,17 +130,32 @@ - ### - #TIFF = -DDOTIFF - TIFF = -DDOTIFF -DUSE_TILED_TIFF_BOTLEFT_FIX --TIFFDIR = tiff --TIFFINC = -I$(TIFFDIR) --TIFFLIB = $(TIFFDIR)/libtiff.a --$(TIFFLIB): -- ( cd $(TIFFDIR) ; make CC='$(CC)' COPTS='$(CCOPTS) $(MCHN)' ) -+#TIFFDIR = tiff -+TIFFDIR = /usr -+#TIFFDIR = /usr/local -+#TIFFDIR = ../../libtiff -+### -+TIFFINC = -I$(TIFFDIR)/include -+#TIFFINC = -I$(TIFFDIR) -+### -+### libtiff 3.5 and up may be compiled with zlib and libjpeg, but dependency -+### is properly handled in LIBS line ~143 lines below -+### -+TIFFLIB = -L$(TIFFDIR)/lib -ltiff -+#TIFFLIB = -L$(TIFFDIR) -ltiff -+#TIFFLIB = $(TIFFDIR)/libtiff.a -+### -+### this is intended to build the ancient version (3.3.016 beta) that's included -+### in the "tiff" subdir of XV, not an arbitrary copy of libtiff: -+### -+#$(TIFFLIB): -+# ( cd $(TIFFDIR) ; make CC='$(CC)' COPTS='$(CCOPTS) $(MCHN)' ) - - - ### - ### if, for whatever reason, you're unable to get the PDS/VICAR support - ### to compile (xvpds.c, and vdcomp.c), *COMMENT OUT* the following line, --### and also remove 'vdcomp' from the 'all:' dependancy -+### and also remove 'vdcomp' from the 'all:' dependency - ### - PDS = -DDOPDS - -@@ -98,8 +163,10 @@ - #----------System V---------- - - # if you are running on a SysV-based machine, such as HP, Silicon Graphics, --# Solaris, etc., uncomment the following line to get mostly there. --#UNIX = -DSVR4 -+# Solaris, etc.; uncomment one of the following lines to get you *most* of -+# the way there. SYSV means System V R3. -+# UNIX = -DSVR4 -+# UNIX = -DSYSV - - - #----------Machine-Specific Configurations---------- -@@ -121,12 +188,15 @@ - # To use old HP compilers (HPUX 7.0 or so), you may need - #MCHN= -Dhpux -D_HPUX_SOURCE +Ns4000 - # --# also, if you're using HP's compiler, add '-Aa' to whichever of those -+# Also, if you're using HP's compiler, add '-Aa' to whichever of those - # two lines you're using, to turn on ANSI C mode. Or so I'm told. - # --# note: You may need to add '-I/usr/include/X11R5' (or R6, or whatever) -+# Note: You may need to add '-I/usr/include/X11R5' (or R6, or whatever) - # to whichever of those lines you used, as HP tends to store their X11 - # include files in a non-standard place... -+# -+# And you probably have to add '-lV3' to the end of the LIBS def when -+# using XV's AUTO_EXPAND option. - - - ### for LINUX, uncomment the following line -@@ -205,6 +275,16 @@ - #VPRINTF = -DNEED_VPRINTF -DLONGINT -DNOSTDHDRS - - -+# if your X Window System compiled with -DX_LOCALE, -+# uncomment the following line: -+# TVL10N = -DX_LOCALE -+ -+# Install directory of xv_mgcsfx.sample. -+MGCSFXDIR = $(LIBDIR) -+# Directory of default configuration file. -+MGCSFX = -DMGCSFXDIR=\"$(MGCSFXDIR)\" -+ -+ - - - ################ END OF CONFIGURATION OPTIONS ################# -@@ -212,13 +292,14 @@ - - - --CFLAGS = $(CCOPTS) $(JPEG) $(JPEGINC) $(TIFF) $(TIFFINC) $(PDS) \ -- $(NODIRENT) $(VPRINTF) $(TIMERS) $(UNIX) $(BSDTYPES) $(RAND) \ -- $(DXWM) $(MCHN) -+CFLAGS = $(CCOPTS) $(PNG) $(PNGINC) $(ZLIBINC) $(JPEG) $(JPEGINC) \ -+ $(TIFF) $(TIFFINC) $(PDS) $(NODIRENT) $(VPRINTF) $(TIMERS) \ -+ $(UNIX) $(BSDTYPES) $(RAND) $(DXWM) $(MCHN) $(TVL10N) $(MGCSFX) \ -+ -DSYSCONFDIR=\"$(SYSCONFDIR)\" -DXVEXECPATH=\"$(LIBDIR)\" - - ### remove -lm for BeOS: --LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) -lm --#LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) -+LIBS = $(TIFFLIB) $(JPEGLIB) $(PNGLIB) $(ZLIBLIB) -L/usr/X11R6/lib -lX11 -lm -+#LIBS = $(TIFFLIB) $(JPEGLIB) $(PNGLIB) $(ZLIBLIB) -lX11 - - OBJS = xv.o xvevent.o xvroot.o xvmisc.o xvimage.o xvcolor.o xvsmooth.o \ - xv24to8.o xvgif.o xvpm.o xvinfo.o xvctrl.o xvscrl.o xvalg.o \ -@@ -226,7 +307,9 @@ - xvdial.o xvgraf.o xvsunras.o xvjpeg.o xvps.o xvpopup.o xvdflt.o \ - xvtiff.o xvtiffwr.o xvpds.o xvrle.o xviris.o xvgrab.o vprintf.o \ - xvbrowse.o xvtext.o xvpcx.o xviff.o xvtarga.o xvxpm.o xvcut.o \ -- xvxwd.o xvfits.o -+ xvxwd.o xvfits.o xvpng.o xvzx.o xvwbmp.o xvpcd.o xvhips.o \ -+ xvmag.o xvpic.o xvmaki.o xvpi.o xvpic2.o xvvd.o xvmgcsfx.o \ -+ xvml.o - - MISC = README INSTALL CHANGELOG IDEAS - -@@ -236,10 +319,12 @@ - - - --all: $(JPEGLIB) $(TIFFLIB) xv bggen vdcomp xcmap xvpictoppm -+#all: $(JPEGLIB) $(TIFFLIB) xv bggen vdcomp xcmap xvpictoppm -+all: xv bggen vdcomp xcmap xvpictoppm - - --xv: $(OBJS) $(JPEGLIB) $(TIFFLIB) -+#xv: $(OBJS) $(JPEGLIB) $(TIFFLIB) -+xv: $(OBJS) - $(CC) -o xv $(CFLAGS) $(OBJS) $(LIBS) - - bggen: bggen.c -@@ -268,13 +353,14 @@ - - - install: all -- cp xv bggen vdcomp xcmap xvpictoppm $(BINDIR) -- cp docs/xv.man $(MANDIR)/xv.$(MANSUF) -- cp docs/bggen.man $(MANDIR)/bggen.$(MANSUF) -- cp docs/xcmap.man $(MANDIR)/xcmap.$(MANSUF) -- cp docs/xvp2p.man $(MANDIR)/xvpictoppm.$(MANSUF) -- cp docs/vdcomp.man $(MANDIR)/vdcomp.$(MANSUF) -- cp docs/xvdocs.ps* $(LIBDIR) -+ cp xv bggen vdcomp xcmap xvpictoppm $(DESTDIR)$(BINDIR) -+ cp docs/xv.man $(DESTDIR)$(MANDIR)/xv.$(MANSUF) -+ cp docs/bggen.man $(DESTDIR)$(MANDIR)/bggen.$(MANSUF) -+ cp docs/xcmap.man $(DESTDIR)$(MANDIR)/xcmap.$(MANSUF) -+ cp docs/xvp2p.man $(DESTDIR)$(MANDIR)/xvpictoppm.$(MANSUF) -+ cp docs/vdcomp.man $(DESTDIR)$(MANDIR)/vdcomp.$(MANSUF) -+ cp docs/xvdocs.ps* $(DESTDIR)$(LIBDIR) # or $(DESTDIR)$(DOCDIR) -+ #cp xv_mgcsfx.sample $(DESTDIR)$(SYSCONFDIR)/xv_mgcsfx - - tar: - # tar only local jpeg and tiff dirs, not user's or system's copies: -@@ -299,7 +385,7 @@ - xvbrowse.o: bits/br_pcx bits/br_jfif bits/br_tiff bits/br_pds - xvbrowse.o: bits/br_ps bits/br_iff bits/br_targa bits/br_xpm - xvbrowse.o: bits/br_trash bits/fcurs bits/fccurs bits/fdcurs bits/fcursm --xvbrowse.o: bits/br_xwd -+xvbrowse.o: bits/br_xwd bits/br_png bits/br_zx bits/br_pcd bits/br_bzip2 - - xvbutt.o: bits/cboard50 bits/rb_frame bits/rb_frame1 bits/rb_top - xvbutt.o: bits/rb_bot bits/rb_dtop bits/rb_dbot bits/rb_body -diff -ruN xv-3.10a-bugfixes/Makefile.std xv-3.10a-enhancements/Makefile.std ---- xv-3.10a-bugfixes/Makefile.std 2005-04-06 08:17:13.000000000 -0700 -+++ xv-3.10a-enhancements/Makefile.std 2005-05-01 10:23:32.000000000 -0700 -@@ -41,10 +41,14 @@ - - - ### Installation locations --BINDIR = /usr/local/bin --MANDIR = /usr/local/man/man1 -+PREFIX = /usr/local -+BINDIR = $(PREFIX)/bin -+MANDIR = $(PREFIX)/man/man1 - MANSUF = 1 --LIBDIR = /usr/local/lib -+DOCDIR = $(PREFIX)/doc/xv-3.10a -+LIBDIR = $(PREFIX)/lib/xv -+SYSCONFDIR = $(PREFIX)/etc -+DESTDIR = - - - buildit: all -@@ -59,13 +63,59 @@ - ### on your machine, *COMMENT OUT* the following lines - ### - JPEG = -DDOJPEG --JPEGDIR = jpeg --JPEGINC = -I$(JPEGDIR) --JPEGLIB = $(JPEGDIR)/libjpeg.a --$(JPEGDIR)/jconfig.h: -- cd $(JPEGDIR) ; ./configure CC='$(CC)' --$(JPEGLIB): $(JPEGDIR)/jconfig.h -- cd $(JPEGDIR) ; make -+#JPEGDIR = jpeg -+JPEGDIR = /usr -+#JPEGDIR = /usr/local -+#JPEGDIR = ../../libjpeg -+### -+JPEGINC = -I$(JPEGDIR)/include -+#JPEGINC = -I$(JPEGDIR) -+### -+JPEGLIB = -L$(JPEGDIR)/lib -ljpeg -+#JPEGLIB = -L$(JPEGDIR) -ljpeg -+#JPEGLIB = $(JPEGDIR)/libjpeg.a -+### -+### this is intended to build the ancient version (5a) that's included in the -+### "jpeg" subdir of XV, not an arbitrary copy of libjpeg: -+### -+#$(JPEGDIR)/jconfig.h: -+# cd $(JPEGDIR) ; ./configure CC='$(CC)' -+#$(JPEGLIB): $(JPEGDIR)/jconfig.h -+# cd $(JPEGDIR) ; make -+ -+ -+### -+### if, for whatever reason, you're unable to get the PNG library to compile -+### on your machine, *COMMENT OUT* the following lines -+### -+PNG = -DDOPNG -+PNGDIR = /usr -+#PNGDIR = /usr/local -+#PNGDIR = ../../libpng -+### -+PNGINC = -I$(PNGDIR)/include -+#PNGINC = -I$(PNGDIR) -+### -+PNGLIB = -L$(PNGDIR)/lib -lpng -+#PNGLIB = -L$(PNGDIR) -lpng -+#PNGLIB = $(PNGDIR)/libpng.a -+ -+ -+### -+### if, for whatever reason, you're unable to get both the PNG library and -+### (newer versions of) the TIFF library to compile on your machine, *COMMENT -+### OUT* the following lines -+### -+ZLIBDIR = /usr -+#ZLIBDIR = /usr/local -+#ZLIBDIR = ../../zlib -+### -+ZLIBINC = -I$(ZLIBDIR)/include -+#ZLIBINC = -I$(ZLIBDIR) -+### -+ZLIBLIB = -L$(ZLIBDIR)/lib -lz -+#ZLIBLIB = -L$(ZLIBDIR) -lz -+#ZLIBLIB = $(ZLIBDIR)/libz.a - - - ### -@@ -80,17 +130,32 @@ - ### - #TIFF = -DDOTIFF - TIFF = -DDOTIFF -DUSE_TILED_TIFF_BOTLEFT_FIX --TIFFDIR = tiff --TIFFINC = -I$(TIFFDIR) --TIFFLIB = $(TIFFDIR)/libtiff.a --$(TIFFLIB): -- ( cd $(TIFFDIR) ; make CC='$(CC)' COPTS='$(CCOPTS) $(MCHN)' ) -+#TIFFDIR = tiff -+TIFFDIR = /usr -+#TIFFDIR = /usr/local -+#TIFFDIR = ../../libtiff -+### -+TIFFINC = -I$(TIFFDIR)/include -+#TIFFINC = -I$(TIFFDIR) -+### -+### libtiff 3.5 and up may be compiled with zlib and libjpeg, but dependency -+### is properly handled in LIBS line ~143 lines below -+### -+TIFFLIB = -L$(TIFFDIR)/lib -ltiff -+#TIFFLIB = -L$(TIFFDIR) -ltiff -+#TIFFLIB = $(TIFFDIR)/libtiff.a -+### -+### this is intended to build the ancient version (3.3.016 beta) that's included -+### in the "tiff" subdir of XV, not an arbitrary copy of libtiff: -+### -+#$(TIFFLIB): -+# ( cd $(TIFFDIR) ; make CC='$(CC)' COPTS='$(CCOPTS) $(MCHN)' ) - - - ### - ### if, for whatever reason, you're unable to get the PDS/VICAR support - ### to compile (xvpds.c, and vdcomp.c), *COMMENT OUT* the following line, --### and also remove 'vdcomp' from the 'all:' dependancy -+### and also remove 'vdcomp' from the 'all:' dependency - ### - PDS = -DDOPDS - -@@ -98,8 +163,10 @@ - #----------System V---------- - - # if you are running on a SysV-based machine, such as HP, Silicon Graphics, --# Solaris, etc., uncomment the following line to get mostly there. --#UNIX = -DSVR4 -+# Solaris, etc.; uncomment one of the following lines to get you *most* of -+# the way there. SYSV means System V R3. -+# UNIX = -DSVR4 -+# UNIX = -DSYSV - - - #----------Machine-Specific Configurations---------- -@@ -121,12 +188,15 @@ - # To use old HP compilers (HPUX 7.0 or so), you may need - #MCHN= -Dhpux -D_HPUX_SOURCE +Ns4000 - # --# also, if you're using HP's compiler, add '-Aa' to whichever of those -+# Also, if you're using HP's compiler, add '-Aa' to whichever of those - # two lines you're using, to turn on ANSI C mode. Or so I'm told. - # --# note: You may need to add '-I/usr/include/X11R5' (or R6, or whatever) -+# Note: You may need to add '-I/usr/include/X11R5' (or R6, or whatever) - # to whichever of those lines you used, as HP tends to store their X11 - # include files in a non-standard place... -+# -+# And you probably have to add '-lV3' to the end of the LIBS def when -+# using XV's AUTO_EXPAND option. - - - ### for LINUX, uncomment the following line -@@ -205,6 +275,16 @@ - #VPRINTF = -DNEED_VPRINTF -DLONGINT -DNOSTDHDRS - - -+# if your X Window System compiled with -DX_LOCALE, -+# uncomment the following line: -+# TVL10N = -DX_LOCALE -+ -+# Install directory of xv_mgcsfx.sample. -+MGCSFXDIR = $(LIBDIR) -+# Directory of default configuration file. -+MGCSFX = -DMGCSFXDIR=\"$(MGCSFXDIR)\" -+ -+ - - - ################ END OF CONFIGURATION OPTIONS ################# -@@ -212,13 +292,14 @@ - - - --CFLAGS = $(CCOPTS) $(JPEG) $(JPEGINC) $(TIFF) $(TIFFINC) $(PDS) \ -- $(NODIRENT) $(VPRINTF) $(TIMERS) $(UNIX) $(BSDTYPES) $(RAND) \ -- $(DXWM) $(MCHN) -+CFLAGS = $(CCOPTS) $(PNG) $(PNGINC) $(ZLIBINC) $(JPEG) $(JPEGINC) \ -+ $(TIFF) $(TIFFINC) $(PDS) $(NODIRENT) $(VPRINTF) $(TIMERS) \ -+ $(UNIX) $(BSDTYPES) $(RAND) $(DXWM) $(MCHN) $(TVL10N) $(MGCSFX) \ -+ -DSYSCONFDIR=\"$(SYSCONFDIR)\" -DXVEXECPATH=\"$(LIBDIR)\" - - ### remove -lm for BeOS: --LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) -lm --#LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) -+LIBS = $(TIFFLIB) $(JPEGLIB) $(PNGLIB) $(ZLIBLIB) -L/usr/X11R6/lib -lX11 -lm -+#LIBS = $(TIFFLIB) $(JPEGLIB) $(PNGLIB) $(ZLIBLIB) -lX11 - - OBJS = xv.o xvevent.o xvroot.o xvmisc.o xvimage.o xvcolor.o xvsmooth.o \ - xv24to8.o xvgif.o xvpm.o xvinfo.o xvctrl.o xvscrl.o xvalg.o \ -@@ -226,7 +307,9 @@ - xvdial.o xvgraf.o xvsunras.o xvjpeg.o xvps.o xvpopup.o xvdflt.o \ - xvtiff.o xvtiffwr.o xvpds.o xvrle.o xviris.o xvgrab.o vprintf.o \ - xvbrowse.o xvtext.o xvpcx.o xviff.o xvtarga.o xvxpm.o xvcut.o \ -- xvxwd.o xvfits.o -+ xvxwd.o xvfits.o xvpng.o xvzx.o xvwbmp.o xvpcd.o xvhips.o \ -+ xvmag.o xvpic.o xvmaki.o xvpi.o xvpic2.o xvvd.o xvmgcsfx.o \ -+ xvml.o - - MISC = README INSTALL CHANGELOG IDEAS - -@@ -236,10 +319,12 @@ - - - --all: $(JPEGLIB) $(TIFFLIB) xv bggen vdcomp xcmap xvpictoppm -+#all: $(JPEGLIB) $(TIFFLIB) xv bggen vdcomp xcmap xvpictoppm -+all: xv bggen vdcomp xcmap xvpictoppm - - --xv: $(OBJS) $(JPEGLIB) $(TIFFLIB) -+#xv: $(OBJS) $(JPEGLIB) $(TIFFLIB) -+xv: $(OBJS) - $(CC) -o xv $(CFLAGS) $(OBJS) $(LIBS) - - bggen: bggen.c -@@ -268,13 +353,14 @@ - - - install: all -- cp xv bggen vdcomp xcmap xvpictoppm $(BINDIR) -- cp docs/xv.man $(MANDIR)/xv.$(MANSUF) -- cp docs/bggen.man $(MANDIR)/bggen.$(MANSUF) -- cp docs/xcmap.man $(MANDIR)/xcmap.$(MANSUF) -- cp docs/xvp2p.man $(MANDIR)/xvpictoppm.$(MANSUF) -- cp docs/vdcomp.man $(MANDIR)/vdcomp.$(MANSUF) -- cp docs/xvdocs.ps* $(LIBDIR) -+ cp xv bggen vdcomp xcmap xvpictoppm $(DESTDIR)$(BINDIR) -+ cp docs/xv.man $(DESTDIR)$(MANDIR)/xv.$(MANSUF) -+ cp docs/bggen.man $(DESTDIR)$(MANDIR)/bggen.$(MANSUF) -+ cp docs/xcmap.man $(DESTDIR)$(MANDIR)/xcmap.$(MANSUF) -+ cp docs/xvp2p.man $(DESTDIR)$(MANDIR)/xvpictoppm.$(MANSUF) -+ cp docs/vdcomp.man $(DESTDIR)$(MANDIR)/vdcomp.$(MANSUF) -+ cp docs/xvdocs.ps* $(DESTDIR)$(LIBDIR) # or $(DESTDIR)$(DOCDIR) -+ #cp xv_mgcsfx.sample $(DESTDIR)$(SYSCONFDIR)/xv_mgcsfx - - tar: - # tar only local jpeg and tiff dirs, not user's or system's copies: -@@ -299,7 +385,7 @@ - xvbrowse.o: bits/br_pcx bits/br_jfif bits/br_tiff bits/br_pds - xvbrowse.o: bits/br_ps bits/br_iff bits/br_targa bits/br_xpm - xvbrowse.o: bits/br_trash bits/fcurs bits/fccurs bits/fdcurs bits/fcursm --xvbrowse.o: bits/br_xwd -+xvbrowse.o: bits/br_xwd bits/br_png bits/br_zx bits/br_pcd bits/br_bzip2 - - xvbutt.o: bits/cboard50 bits/rb_frame bits/rb_frame1 bits/rb_top - xvbutt.o: bits/rb_bot bits/rb_dtop bits/rb_dbot bits/rb_body -diff -ruN xv-3.10a-bugfixes/README.jumbo xv-3.10a-enhancements/README.jumbo ---- xv-3.10a-bugfixes/README.jumbo 2005-04-10 19:55:23.000000000 -0700 -+++ xv-3.10a-enhancements/README.jumbo 2005-05-01 13:45:58.000000000 -0700 -@@ -14,10 +14,10 @@ - available from John's XV site (http://www.trilon.com/xv/downloads.html - and ftp://ftp.trilon.com/pub/xv/patches/), plus a number of my own fixes - and additions, plus quite a few from other people--though not all of the --ones I'd intended to (sorry, SJT, AT, and JPD!) due to lack of time after --dealing with the latest security issue (which I discovered, sigh). They're --still not fully complete, and it's possible they never will be, but I do --plan to continue working on them whenever the mood strikes--and I may even -+ones I'd intended to, due to lack of time after dealing with the latest -+set of security issues (one of which I discovered, sigh). They're still -+not fully complete, and it's possible they never will be, but I do plan -+to continue tinkering with them whenever the mood strikes--and I may even - release them publicly on rare occasions. (At the current rate, it looks - like once a year may be the best we can hope for...we'll see.) - -@@ -26,91 +26,86 @@ - - - Landon Curt "chongo" Noll (http://www.isthe.com/chongo/) - http://www.isthe.com/chongo/src/xv-patch/ -- - Mark Ashley <mark@ibiblio.org> +diff -u -r --new-file xv-3.10a.orig/README.jumbo xv-3.10a/README.jumbo +--- xv-3.10a.orig/README.jumbo 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/README.jumbo 2007-05-21 00:19:20.000000000 -0500 +@@ -0,0 +1,559 @@ ++This is the latest version of the XV jumbo patches I originally created in ++February 2000 (but never distributed) and eventually updated and released in ++May 2004, prompted by a discussion on LWN (http://lwn.net/Articles/76391/). ++Information about the patches, updates to the patches, and the patches ++themselves can all be found here: ++ ++ http://pobox.com/~newt/greg_xv.html ++ http://freshmeat.net/projects/xvjumbopatches/ ++ ++(Use the "Subscribe to new releases" link on the latter page if you want to ++be notified of new versions automatically; trivial registration required.) ++ ++These patches incorporate all of the fix- and enhancement-patches available ++from John's XV site (http://www.trilon.com/xv/downloads.html and ++ftp://ftp.trilon.com/pub/xv/patches/), plus a number of my own fixes and ++additions (security-related and otherwise), plus quite a few from other ++people. They're still not fully complete, and it's probable they never ++will be, but I do plan to continue tinkering with them whenever the mood ++strikes--and I may even release them publicly on rare occasions. (At the ++current rate, once every few years may be the best we can hope for....) ++ ++Also be aware that several other people have had the same idea over the ++years. Ones I've found, more or less by accident, include: ++ ++ - Landon Curt "chongo" Noll (http://www.isthe.com/chongo/) ++ http://www.isthe.com/chongo/src/xv-patch/ + - Mark Ashley <mark ibiblio.org> - http://www.ibiblio.org/pub/packages/solaris/sparc/html/xv.3.10a.p19.html -- - Peter Jordan <pete@dc.seflin.org> ++ http://www.ibiblio.org/pub/packages/solaris/sparc/html/xv.3.10a.p19.html + - Peter Jordan <pete dc.seflin.org> - http://www.ibiblio.org/pub/Linux/apps/graphics/viewers/X/xv-3.10a.patch.* - - Uwe F. Mayer (http://www.tux.org/~mayer/) - http://www.tux.org/~mayer/linux/book/node311.html -- - Kurt Wall <kwall@kurtwerks.com> ++ http://www.ibiblio.org/pub/Linux/apps/graphics/viewers/X/xv-3.10a.patch.* ++ - Uwe F. Mayer (http://www.tux.org/~mayer/) ++ http://www.tux.org/~mayer/linux/book/node311.html + - Kurt Wall <kwall kurtwerks.com> - http://www.kurtwerks.com/software/xv.html - - Chisato Yamauchi (http://phe.phyas.aichi-edu.ac.jp/~cyamauch/index_en.html) - http://phe.phyas.aichi-edu.ac.jp/~cyamauch/xv.html -- - Daisuke Yabuki <dxy@optix.org> ++ http://www.kurtwerks.com/software/xv.html ++ - Chisato Yamauchi (http://phe.phyas.aichi-edu.ac.jp/~cyamauch/index_en.html) ++ http://phe.phyas.aichi-edu.ac.jp/~cyamauch/xv.html + - Daisuke Yabuki <dxy optix.org> - http://www.optix.org/~dxy/solaris/xv/ - - Pekoe (http://pekoe.lair.net/) - http://pekoe.lair.net/diary/xv.html - - FreeBSD FreshPorts - http://www.freshports.org/graphics/xv/ -- - <sudakyo@fat.coara.or.jp> ++ http://www.optix.org/~dxy/solaris/xv/ ++ - Pekoe (http://pekoe.lair.net/) ++ http://pekoe.lair.net/diary/xv.html ++ - FreeBSD FreshPorts ++ http://www.freshports.org/graphics/xv/ + - Kyoichiro Suda <sudakyo fat.coara.or.jp> - http://www.coara.or.jp/~sudakyo/XV_jp.html - --I very much doubt that this is an exhaustive list. So far, most of the other --patch-sets appear not to be quite as extensive or as up-to-date as my own, --although the last three or four do include the [large] Japanese extension --patches that I omitted--not because they're unworthy, but simply because I --didn't find them until collisions between the two sets of patches had become --a large problem. (Maybe for the next release... I'd intended to try for --this release, but the security issues ended up taking almost all of my --available time. And, to be honest, from my perspective, inclusion of the --jp-extension patches is more for completeness' sake than personal interest, --so their priority is fairly low.) -+I very much doubt that this is an exhaustive list. So far, most of the -+other patch-sets appear not to be as extensive or as up-to-date as my own, -+particularly now that the (very large) "Japanese extension" patches are -+incorporated--big thanks to Werner Fink of SuSE for that! - - Below I summarize the component patches that are encompassed by my jumbo - bugfixes and jumbo enhancements patches. Unfortunately, some of my own - additions never saw the light of day as standalone patches, but considering - the number of overlaps (collisions) already implicit in this list, it would --have been difficult to accomplish even if I'd had the time. In any case, --they're present in these jumbo patches but not chongo's, so those who _really_ --care can "subtract" the two sets of patches to see what I did. -+have been difficult to accomplish even if I'd had the time. - - Here's a quick guide to the "third-party" credits in the lists below: - - AAC = Andrey A. Chernov [ache] - (http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-ab) -- AD = Andreas Dilger (adilger@clusterfs.com) -- AL = Alexander Lehmann (lehmann@usa.net) ++ http://www.coara.or.jp/~sudakyo/XV_jp.html ++ ++This is not an exhaustive list (e.g., Jörgen Grahn also had one). So far, ++most of the other patch-sets appear not to be as extensive or as up-to-date ++as my own, particularly now that the (very large) "Japanese extension" patches ++are incorporated--big thanks to Werner Fink of SuSE for that! ++ ++Below I summarize the component patches that are encompassed by my jumbo ++bugfixes and jumbo enhancements patches, circa 2005. (As of 2007, they're ++distributed as a single monster-patch, and the "component patches" are now ++listed in the changelog section at the bottom of this file.) Unfortunately, ++some of my own additions never saw the light of day as standalone patches, ++but considering the number of overlaps (collisions) already implicit in the ++list, that would have been difficult to accomplish even if I'd had the time. ++ ++Here's a quick guide to the "third-party" credits in the lists and changelog ++below: ++ ++ AAC = Andrey A. Chernov [ache] ++ (http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-ab) + AD = Andreas Dilger (adilger clusterfs.com) + AL = Alexander Lehmann (lehmann usa.net) - AT = Anthony Thyssen (http://www.cit.gu.edu.au/~anthony/) - DAC = David A. Clunie (http://www.dclunie.com/xv-pcd.html) -- EK = Egmont Koblinger (egmont@users.sourceforge.net) ++ AS = Alexey Spiridonov (http://www-math.mit.edu/~lesha/) ++ AT = Anthony Thyssen (http://www.cit.gu.edu.au/~anthony/) ++ BR = Bruno Rohee (http://bruno.rohee.com/) ++ DAC = David A. Clunie (http://www.dclunie.com/xv-pcd.html) ++ EAJ = Erling A. Jacobsen (linuxcub email.dk) + EK = Egmont Koblinger (egmont users.sourceforge.net) - GRR = Greg Roelofs (http://pobox.com/~newt/) - GV = Guido Vollbeding (http://sylvana.net/guido/) ++ FG = Fabian Greffrath (fabian debian-unofficial.org) ++ GRR = Greg Roelofs (http://pobox.com/~newt/greg_contact.html) ++ GV = Guido Vollbeding (http://sylvana.net/guido/) + IM = IKEMOTO Masahiro (ikeyan airlab.cs.ritsumei.ac.jp) - JCE = John C. Elliott (http://www.seasip.demon.co.uk/ZX/zxdload.html) - JHB = John H. Bradley, of course (http://www.trilon.com/xv/) - JPD = Jean-Pierre Demailly (http://www-fourier.ujf-grenoble.fr/~demailly/) - JR = John Rochester (http://www.freebsd.org/cgi/query-pr.cgi?pr=2920) - (also http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-af, -ag) - JZ = Joe Zbiciak (http://spatula-city.org/~im14u2c/) ++ JC = John Cooper (john.cooper third-harmonic.com) ++ JCE = John C. Elliott (http://www.seasip.demon.co.uk/ZX/zxdload.html) ++ JDB = John D. Baker (http://mylinuxisp.com/~jdbaker/) ++ JG = Jörgen Grahn (jgrahn algonet.se) ++ JHB = John H. Bradley, of course (http://www.trilon.com/xv/) ++ JPD = Jean-Pierre Demailly (http://www-fourier.ujf-grenoble.fr/~demailly/) ++ JR = John Rochester (http://www.freebsd.org/cgi/query-pr.cgi?pr=2920) ++ (also http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-af, -ag) ++ JRK = James Roberts Kirkpatrick (uwyo.edu) ++ JZ = Joe Zbiciak (http://spatula-city.org/~im14u2c/) + KS = Kyoichiro Suda (http://www.coara.or.jp/~sudakyo/XV_jp.html) - LCN = Landon Curt "chongo" Noll (http://www.isthe.com/chongo/) ++ LCN = Landon Curt "chongo" Noll (http://www.isthe.com/chongo/) + LJ = Larry Jones (lawrence.jones ugs.com) - PBJ = Peter Jordan (http://www.ibiblio.org/pub/Linux/apps/graphics/viewers/X/) - PSV = Pawel S. Veselov (http://manticore.2y.net/wbmp.html) - SB = Sean Borman (http://www.nd.edu/~sborman/software/xvwheelmouse.html) -- SJT = TenThumbs (tenthumbs@cybernex.net) ++ PBJ = Peter Jordan (http://www.ibiblio.org/pub/Linux/apps/graphics/viewers/X/) ++ PSV = Pawel S. Veselov (http://manticore.2y.net/wbmp.html) ++ RAC = Ross Combs (rocombs cs.nmsu.edu) ++ RJH = Robin Humble (http://www.cita.utoronto.ca/~rjh/) ++ SB = Sean Borman (http://www.nd.edu/~sborman/software/xvwheelmouse.html) + SJT = TenThumbs (tenthumbs cybernex.net) - TA = Tim Adye (http://hepwww.rl.ac.uk/Adye/xv-psnewstyle.html) ++ SBM = Scott B. Marovich (formerly marovich hpl.hp.com) ++ TA = Tim Adye (http://hepwww.rl.ac.uk/Adye/xv-psnewstyle.html) ++ TAR = Tim Ramsey (tar pobox.com) + TI = Tetsuya INOUE (tin329 chino.it.okayama-u.ac.jp) + TO = Tavis Ormandy (taviso gentoo.org) + WF = Werner Fink (http://www.suse.de/~werner/) - - Other credits are as listed on the XV Downloads page or in the respective - patches (e.g., the jp-extension patches or within the PNG patch). - - Finally, please note that these patches have not been blessed by John Bradley --in any way (although I copied him on the May 2004 announcement--no response). --Nor have I personally tested every change and feature! (See the BIG SCARY --WARNING below for further caveats.) In other words, they're both completely --unofficial and completely unguaranteed. But they seem to work for me. (And --when they don't, I fix 'em. Eventually, anyway... ;-) ) -- --One further "final" note: this may well be the last release to include --separate fix- and enhancements-patches. It is too much of a timesink to --maintain parallel trees--not to mention parallel makefiles (generic/public --vs. local/personal, old vs. new libjpeg/libtiff) and xv.h (unregistered/ --public vs. registered/personal), particularly when some fixes come about --while working on an enhancement. Henceforth--assuming, of course, that --there _is_ a "henceforth"--I expect to merge the patches into a single --jumbo patch. (Alternatively, I may simply freeze the current fix-patch --and continue to evolve only the enhancements patch; in particular, new --fixes would appear only in it. Either approach would be simple enough; --feedback as to which would be preferable is welcomed.) -+in any way (although I copied him on the May 2004 announcement--no response -+at that time). Nor have I personally tested every change and feature! (See -+the BIG SCARY WARNING below for further caveats.) In other words, they're -+both completely unofficial and completely unguaranteed. But they seem to -+work for me. (And when they don't, I fix 'em. Eventually, anyway... ;-) ) -+ -+One further "final" note: as of this release, I am no longer updating the -+fixes patch; new stuff (including fixes) now appears only in the enhancements -+one. It simply became too much of a timesink to maintain parallel trees--not -+to mention parallel makefiles (generic/public vs. local/personal, old vs. -+new libjpeg/libtiff) and xv.h (unregistered/public vs. registered/personal), -+particularly when some fixes came about while working on an enhancement and -+others were provided by third parties relative to the previous fix+enh state. -+Hence the mismatched "20050410" date on the fixes patch. - --GRR 20050410 -+GRR 20050501 - - - How to build -@@ -158,8 +153,8 @@ - Assuming you have the prerequisites out of the way and aren't scared - off by the Big Scary Warning, here's the build procedure: - -- bzip2 -dc xv-3.10a-jumbo-patches-20050410.tar.bz2 | tar xvf - -- (or tar xvzf xv-3.10a-jumbo-patches-20050410.tar.gz) -+ bzip2 -dc xv-3.10a-jumbo-patches-20050501.tar.bz2 | tar xvf - -+ (or tar xvzf xv-3.10a-jumbo-patches-20050501.tar.gz) - - tar xvzf xv-3.10a.tar.gz - -@@ -167,7 +162,7 @@ - - patch -p1 < ../xv-3.10a-jumbo-fix-patch-20050410.txt - -- [optional] patch -p1 < ../xv-3.10a-jumbo-enh-patch-20050410.txt -+ [optional] patch -p1 < ../xv-3.10a-jumbo-enh-patch-20050501.txt - - edit Makefile and config.h as directed in INSTALL file (in particular, - ensure paths to external libraries and header files are correct) -@@ -221,6 +216,8 @@ - - freebsd-vdcomp-newline.patch (AAC) - - xv-3.10a.patch.linux (PBJ) [/bin/sh versions of cleandir, RANLIB.sh only] - - removed trailing white space (GRR) [purely cosmetic] ++ ++Other credits are as listed on the XV Downloads page or in the respective ++patches (e.g., the jp-extension patches or within the PNG patch). ++ ++Finally, please note that these patches have not been blessed by John Bradley ++in any way (although I copied him on the May 2004 announcement and wrote to ++him again in May 2005), unless you count Debian's redistribution permission ++(Daniel Kirchheimer, 5 Dec 2005). Nor have I personally tested every change ++and feature! (See the BIG SCARY WARNING below for further caveats.) In other ++words, they're both completely unofficial and completely unguaranteed. But ++they seem to work for me. (And when they don't, I try to fix 'em--eventually, ++anyway... ;-) ) ++ ++Greg Roelofs, 20070520 ++http://pobox.com/~newt/greg_contact.html ++ ++ ++How to build ++------------ ++ ++The following assumes you, the user, already have the libtiff,[1] libjpeg,[2] ++libpng,[3] zlib,[4] and JasPer[5] libraries downloaded, patched (if necessary), ++compiled, and installed, not to mention a C compiler and the bzip2,[6] tar,[7] ++patch,[8] and make[9] utilities. You should also have downloaded the original ++XV 3.10a source distribution from the XV Downloads page[10] and be able to edit ++its Makefile and config.h files as indicated in the INSTALL file. (Editing ++the Makefile will also allow you to disable some of the third-party libraries ++if you wish.) Finally, you should know what a Unix(-style) command line is, ++where to find one, and how to wield it with abandon (or at least with adult ++supervision)--and preferably not as the root user until the "make install" ++step. (A filesystem is a terrible thing to waste.) ++ ++ [1] http://www.remotesensing.org/libtiff/ ++ [2] http://www.ijg.org/ ++ [3] http://www.libpng.org/pub/png/libpng.html ++ [4] http://www.zlib.net/ ++ [5] http://www.ece.uvic.ca/~mdadams/jasper/ ++ [6] http://sources.redhat.com/bzip2/ ++ [7] http://www.gnu.org/directory/devel/specific/tar.html ++ [8] http://www.gnu.org/directory/devel/specific/patch.html ++ [9] http://www.gnu.org/directory/devel/specific/make.html ++ [10] http://www.trilon.com/xv/downloads.html#src-distrib ++ +++-------------------------------------------------------------------------+ ++| | ++| BIG SCARY WARNING | ++| | ++| These patches work for Greg (and parts of them reportedly work for | ++| various other people), and so far Greg's CPU still computes and his | ++| hard disks haven't been wiped. But there's no guarantee that this | ++| will be the case for you! In particular, not every incorporated patch | ++| has been explicitly tested, nor has every possible subcase of the | ++| explicitly tested subset. (Read that again; it's grammatical.) Nor | ++| are these patches officially blessed by John Bradley in any way. In | ++| other words, if you use these patches, you do so at your own risk. | ++| (Greg doesn't believe there are any serious problems remaining, but | ++| then, what programmer ever does? Bugs happen.) | ++| | +++-------------------------------------------------------------------------+ ++ ++Assuming you have the prerequisites out of the way and aren't scared ++off by the Big Scary Warning, here's the build procedure: ++ ++ tar xvzf xv-3.10a-jumbo-patches-20070520.tar.gz ++ (or: gzip -dc xv-3.10a-jumbo-patches-20070520.tar.gz | tar xvf - ) ++ ++ tar xvzf xv-3.10a.tar.gz ++ ++ cd xv-3.10a ++ ++ patch -p1 < ../xv-3.10a-jumbo-fix-enh-patch-20070520.txt ++ ++ edit Makefile and config.h as directed in INSTALL file (in particular, ++ ensure paths to external libraries and header files are correct) ++ ++ make ++ ++ ./xv your_favorite_image your_other_favorite_image etc. ++ ++If everything seems to be working to your satisfaction, go ahead and install: ++ ++ make -n install (and double-check that things will be installed ++ where you want them to be) ++ ++ become root if necessary (e.g., type su) ++ ++ make install ++ (or: sudo make install) ++ ++That wasn't so hard, was it? ++ ++ ++Summary of incorporated and unincorporated patches (through 20050501) ++--------------------------------------------------------------------- ++(See the ChangeLog at the bottom for more recent incorporated patches.) ++ ++fixes ((*) = listed on XV Downloads page, (f) = on ftp site only): ++ ++20040516: ++ - grabpatch (*) [obsoleted by new-xvgrab.c below] ++ - vispatch (*) ++ - mp-tiff-patch (*) [technically an enhancement, but JHB says...] ++ - longname.patch (*) [*SECURITY*] ++ - xpm.patch (*) ++ - deepcolor.patch (*) [slightly modified for language conformance] ++ - gifpatch (*) ++ - exceed_grab.patch (*) ++ - xv-redhat6-readme.txt (*) [slightly modified for portability] ++ - beos.patch (*) [modified for portability] ++ - croppad.patch (f) ++ - epsfpatch (f) ++ - tiff1200.patch (*) ++ - gssafer.patch (*) [*SECURITY*] ++ - new-xvgrab.c (f) [includes grabpatch but not exceed_grab.patch] ++ - xcmap.diff (AD) [part of xv-3.10a-png-1.2d.tar.gz] ++ - fixes for huge number gcc -Wall warnings--including two bugs (GRR) ++ - fix for cleandir script when no makefile exists (GRR) ++ - *SECURITY* fix for gets() in vdcomp.c (GRR, LCN vdcomp-security.patch) ++ - *SECURITY* fix for getwd() on Linux (GRR, LCN Linux-compile.patch) ++ - fix for "no fuss" Linux compiles (LCN Linux-compile.patch) ++ - partial *SECURITY* fix for mktemp() in xv.c and xvdir.c (GRR) ++ (remaining instances in xv.c (2), xvimage.c, xvfits.c, xvpds.c, xvps.c, and ++ possibly xvtiff.c--most involve system()) ++ - freebsd-vdcomp-newline.patch (AAC) ++ - xv-3.10a.patch.linux (PBJ) [/bin/sh versions of cleandir, RANLIB.sh only] ++ - removed trailing white space (GRR) [purely cosmetic] +20040523: + - fixed compilation error in registered versions (GRR) - 20050410: - - fix for YCbCr oversaturated-green bug(s) in TIFF decoder (GRR) - - provisional fix for contiguous tiled TIFFs with bottom-* orientation (GRR) -@@ -265,12 +262,50 @@ - - boosted maximum number of files from 4096 to 32768 (GRR) - (note that OS kernel limits may also apply; for example, in Linux see - MAX_ARG_PAGES in linux-<version>/include/linux/binfmts.h) -- - xv-3.10a-bmp16.patch -- (from http://www.coara.or.jp/~sudakyo/XV_jp.html) ++20050410: ++ - fix for YCbCr oversaturated-green bug(s) in TIFF decoder (GRR) ++ - provisional fix for contiguous tiled TIFFs with bottom-* orientation (GRR) ++ - fixes for gcc 3.3 -Wall warnings (GRR) ++ - fix for incorrect 16/24-bit display of xwd dumps (SJT) ++ - *SECURITY* fix for multiple input-validation bugs (OpenBSD/SuSE, Gentoo, GRR) ++ (this also completes the partial mktemp() security fix listed above) ++ - fix for (probable) 24-bit endianness bug in fixpix code (GRR) ++ ++ ++enhancements ((*) = listed on XV Downloads page, (<who>) = third-party): ++ ++20040516: ++ - xv-3.10a.JPEG-patch (*) ++ (xv-3.10a.JPEG-patch.old differs only in ftp site listed in comments at top) ++ - xv-3.10a.TIFF-patch (*) ++ - xv-3.10a-png-1.2d.tar.gz (AL, AD) (*) ++ (xvjpeg.diff and xvtiff.diff ignored; xcmap.diff included in fixes) ++ - xvpng-1.2d-fix3.patch (GRR, SJT) (*) ++ - pdf.patch (*) ++ - windowid.patch + windowid.patch.readme (*) ++ - bmp32.patch (*) ++ - fixpix-20000610.tar.gz (GV) ++ (identical to 19961127 version except for README updates and new Win32 file) ++ [modified to be runtime-selectable via -/+fixpix option] ++ - browse-remember.patch (JZ) ++ - faster-smooth.patch (JZ) ++ - PAM support (GRR) ++ - PNG/GIF -ibg ("image background") transparency option (GRR) ++ (does not yet support TIFF, XPM or TGA) ++ - VersionInfo* in help screen (GRR) ++ - minor grammar/spelling fixes (GRR) ++ - floating-point support for -wait when USE_TICKS enabled (GRR) ++ - wheelmouse.patch (SB) ++ - freebsd-gravity-hints-patch (JR) ++ - xv-zx.patch (JCE) ++ - xv3.10a.wapbmp.patch (PSV) ++ - xv-3.10a-pcd.patch.20010708 (DAC) ++ - jp-ext-bzip2-1.1.patch ++ (from ftp://ftp.freebsd.org/pub/FreeBSD/ports/local-distfiles/shige/xv/) ++20050410: ++ - boosted maximum number of files from 4096 to 32768 (GRR) ++ (note that OS kernel limits may also apply; for example, in Linux see ++ MAX_ARG_PAGES in linux-<version>/include/linux/binfmts.h) + - xv-3.10a-bmp16.patch (KS) - - final-image delay (e.g., "-wait 0.2,3" : pause 3 secs on final image) (GRR) - - xv-numpad.patch (EK) - - xv-delete-is-not-backspace.patch (EK) - - made browser window (schnauzer) and icons configurable (AT, GRR) ++ - final-image delay (e.g., "-wait 0.2,3" : pause 3 secs on final image) (GRR) ++ - xv-numpad.patch (EK) ++ - xv-delete-is-not-backspace.patch (EK) ++ - made browser window (schnauzer) and icons configurable (AT, GRR) +20050501: + - xv-3.10a-bmpfix.patch (WF) [*SECURITY*] + - xv310a-jp-extension-rev5.3.3.tar.gz (TI, IM, ..., WF) -+ (adds support for MAG, MAKI, Pi, PIC, and PIC2 formats[*]; "magic suffix" ++ (adds support for MAG, MAKI, Pi, PIC, and PIC2 formats[!]; "magic suffix" + detection/conversion; MacBinary prefixes; archives as virtual filesystems; + multilingual text viewer [though not Unicode]; etc.) + - xv-3.10a-yaos.dif (WF, TO) [*SECURITY*] @@ -844,7 +300,7 @@ diff -ruN xv-3.10a-bugfixes/README.jumbo xv-3.10a-enhancements/README.jumbo + - PATCH.stat (LJ) + - PATCH.thumbs (LJ) + - xv-startgrab-imake-hips.patch (JPD) -+ ("hips" portion only; adds support for HIPS image format[*]) ++ ("hips" portion only; adds support for HIPS image format[!]) + - xv-3.10a-formatstr.patch (KS) + - xv-3.10a-shortsleep.patch (KS) + - xv-3.10a-locale-linux.patch (KS) @@ -854,82 +310,119 @@ diff -ruN xv-3.10a-bugfixes/README.jumbo xv-3.10a-enhancements/README.jumbo + - xv-3.10a-xvexecpath.patch (but disabled pending fixes) (KS) + - xv-3.10a-zeroquit.patch (KS, GRR) + -+ -+[*] Note that all six of these formats may still suffer from exploitable heap ++[!] Note that all six of these formats may still suffer from exploitable heap + overflows [*SECURITY*] when decoding images with large (possibly invalid) + dimensions; as a result, they are DISABLED by default. (Search for "GRR + POSSIBLE OVERFLOW / FIXME" comments in xvmag.c, xvmaki.c, xvpi.c, xvpic.c, + xvpic2.c, and xvhips.c, but keep in mind that these may not be exhaustive.) + Users who choose to overlook these security issues can enable any or all + of them by editing config.h. - - - not (yet?) included: -@@ -284,31 +319,21 @@ - -rw-r--r-- 42397 Mar 11 2004 xv-3.10a-download-test2.patch - -rw-r--r-- 47679 Mar 11 2004 xv-3.10a-download-test3.patch - -rw-r--r-- 52745 Mar 11 2004 xv-3.10a-download-test4.patch -- -rw-r--r-- 415 Mar 11 2004 xv-3.10a-formatstr.patch - -rw-r--r-- 3423 Apr 24 2004 xv-3.10a-keyzoom.patch -- -rw-r--r-- 1461 Mar 11 2004 xv-3.10a-locale-linux.patch - -rw-r--r-- 12387 Mar 15 2004 xv-3.10a-menubutton.patch - -rw-r--r-- 1178 Apr 24 2004 xv-3.10a-noblink.patch -- -rw-r--r-- 484 Mar 11 2004 xv-3.10a-printkey.patch - -rw-r--r-- 57092 Jul 9 2004 xv-3.10a-resolution.patch - -rw-r--r-- 4645 Apr 24 2004 xv-3.10a-selall.patch -- -rw-r--r-- 360 Mar 11 2004 xv-3.10a-shortsleep.patch - -rw-r--r-- 702 Apr 24 2004 xv-3.10a-showlongname.patch - -rw-r--r-- 1205 Apr 24 2004 xv-3.10a-staytoppdir.patch -- -rw-r--r-- 1591 Mar 15 2004 xv-3.10a-sysconfdir.patch - -rw-r--r-- 4228 Apr 24 2004 xv-3.10a-wheelmouse.patch - -rw-r--r-- 744 Apr 24 2004 xv-3.10a-xvbutt_wait.patch -- -rw-r--r-- 712 Mar 11 2004 xv-3.10a-xvexecpath.patch - -rw-r--r-- 3757 Jul 9 2004 xv-3.10a-xvscrl_button2.patch - -rw-r--r-- 1494 Jul 9 2004 xv-3.10a-xvscrl_wait.patch - -rw-r--r-- 19352 Jul 9 2004 xv-3.10a-xvzoom.patch -- -rw-r--r-- 1827 Apr 24 2004 xv-3.10a-zeroquit.patch - -- - xv310a-jp-extension-rev5.3.3.tar.gz [extensive] -- - xv-3.10a-jp-extension-5.3.3-png-1.2d.patch [PNG patch relative to jp-ext] -- - xv-3.10a+jp-extension-rev5.3.3+FLmask.v2.1+png+misc.patch [??] ++ ++ ++not (yet?) included: ++ ++ - others from http://www.coara.or.jp/~sudakyo/XV_jp.html (some are duplicates): ++ -rw-r--r-- 4644 Mar 11 2004 xv-3.10a-directory.patch ++ -rw-r--r-- 462 Mar 11 2004 xv-3.10a-dirwkey.patch ++ -rw-r--r-- 688 Mar 11 2004 xv-3.10a-docdir.patch ++ -rw-r--r-- 11952 Mar 11 2004 xv-3.10a-download-test0.patch ++ -rw-r--r-- 41786 Mar 11 2004 xv-3.10a-download-test1.patch ++ -rw-r--r-- 42397 Mar 11 2004 xv-3.10a-download-test2.patch ++ -rw-r--r-- 47679 Mar 11 2004 xv-3.10a-download-test3.patch ++ -rw-r--r-- 52745 Mar 11 2004 xv-3.10a-download-test4.patch ++ -rw-r--r-- 3423 Apr 24 2004 xv-3.10a-keyzoom.patch ++ -rw-r--r-- 12387 Mar 15 2004 xv-3.10a-menubutton.patch ++ -rw-r--r-- 1178 Apr 24 2004 xv-3.10a-noblink.patch ++ -rw-r--r-- 57092 Jul 9 2004 xv-3.10a-resolution.patch ++ -rw-r--r-- 4645 Apr 24 2004 xv-3.10a-selall.patch ++ -rw-r--r-- 702 Apr 24 2004 xv-3.10a-showlongname.patch ++ -rw-r--r-- 1205 Apr 24 2004 xv-3.10a-staytoppdir.patch ++ -rw-r--r-- 4228 Apr 24 2004 xv-3.10a-wheelmouse.patch ++ -rw-r--r-- 744 Apr 24 2004 xv-3.10a-xvbutt_wait.patch ++ -rw-r--r-- 3757 Jul 9 2004 xv-3.10a-xvscrl_button2.patch ++ -rw-r--r-- 1494 Jul 9 2004 xv-3.10a-xvscrl_wait.patch ++ -rw-r--r-- 19352 Jul 9 2004 xv-3.10a-xvzoom.patch ++ + - xv-3.10a+jp-extension-rev5.3.3+FLmask.v2.1+png+misc.patch ["mask" support] - -- - xv-grab-imake-hips.patch (JPD) [HIPS format, -startgrab option] - - xv-psnewstyle.patch (TA) [coming later in 2005?] - - xv-3.10a.patch.linux (PBJ) [maybe use vdcomp.c changes?] - - xvxpm-anthony-thyssen.c (AT) ["slate grey" bug already gone?] -@@ -332,8 +357,8 @@ - not finished (and/or even started ;-) ): - - - fix xvpng.c not to use direct struct access -- - fix for never-ending pile of SLOW popups when viewing TIFFs with unknown tags -- (or truncated/corrupted images) ++ ++ - xv-psnewstyle.patch (TA) [coming "soon"?] ++ - xv-3.10a.patch.linux (PBJ) [maybe use vdcomp.c changes?] ++ - xvxpm-anthony-thyssen.c (AT) ["slate grey" bug already gone?] ++ - xv-geoff-kuenning-iconsize-slideshow.patch [var. icons; full-screen slides] ++ - xv-scott-marovich-20070214-xvtiff.c.patch6.unified [TIFF CMYK support] ++ ++ - stuff in xv/unsupt: ++ -rw-r--r-- 30527 Dec 22 1994 FITS.rite ++ -rw-r--r-- 49152 Dec 22 1994 FITS.tar ++ -rw-r--r-- 3753 Dec 22 1994 G3.patch1 ++ -rw-r--r-- 24576 Dec 22 1994 G3.tar ++ -rw-r--r-- 1098 Dec 22 1994 INFO.cgm ++ -rw-r--r-- 1941 Dec 22 1994 README ++ -rwxr-xr-x 1059 Dec 22 1994 getweather ++ -rwxr-xr-x 2186 Dec 22 1994 getweather.ksh ++ -rw-r--r-- 856 Dec 22 1994 twm.fix ++ -rw-r--r-- 844 Dec 22 1994 vargs.c ++ -rw-r--r-- 47626 Dec 22 1994 vis ++ -rw-r--r-- 21097 Dec 22 1994 xscm ++ ++ ++ ++not finished (and/or even started ;-) ): ++ ++ - fix xvpng.c not to use direct struct access + - (better) fix for never-ending pile of SLOW popups when viewing TIFFs with + unknown tags (or truncated/corrupted images) - - fix for minor .Z inefficiency in xv.c ("FIXME") - - fix for filename entry-field mouse/cursor bogosity - (want at least positioning to work; preferably also select/cut/paste) -@@ -344,6 +369,7 @@ - - transparency support for TIFF, XPM and TGA images - - support for tiled background image (with transparent foreground image) - - MNG/JNG support ++ - fix for minor .Z inefficiency in xv.c ("FIXME") ++ - fix for filename entry-field mouse/cursor deficiencies ++ (positioning fixed 20070104 by Ross Combs; would like select/cut/paste, too) ++ - fix for .ppm.gz "disk leak" [can't reproduce...already fixed?] ++ (maybe occurs only if filesystem is already nearly full? bad .gz?) ++ ++ - transparency support for TIFF, XPM and TGA images ++ - support for tiled background image (with transparent foreground image) ++ - MNG/JNG support + - SVG support - - - ChangeLog -@@ -364,7 +390,7 @@ - 20040531 - fixed undefined CLK_TCK with gcc -ansi (enh/USE_TICKS option); made - libjpeg, libtiff, libpng and zlib sections of makefile more consistent -- (enh); ++ ++ ++ChangeLog ++--------- ++ ++ 20000220 ++ original pair of jumbo patches, comprising perhaps 16 fix-patches and a ++ dozen enhancement-patches; never publicly released ++ ++ 20040516 ++ first public release, incorporating 25 fix-patches and 21 enhancement- ++ patches ++ ++ 20040523 ++ minor fix to xvctrl.c to support registered versions (GRR warnings-patch ++ was slightly overzealous); switched to tarball packaging ++ ++ 20040531 ++ fixed undefined CLK_TCK with gcc -ansi (enh/USE_TICKS option); made ++ libjpeg, libtiff, libpng and zlib sections of makefile more consistent + (enh) - - 20040606 - added freshmeat link, build instructions, and changelog to jumbo README -@@ -385,3 +411,32 @@ - sex bug in 24-bit FixPix display code (enh/USE_24BIT_ENDIAN_FIX option); - fixed numerical-keypad NumLock behavior and delete-key behavior in file- - load/save window (enh); made schnauzer window and icons configurable (enh) ++ ++ 20040606 ++ added freshmeat link, build instructions, and changelog to jumbo README ++ (this file) ++ ++ 20050213 ++ increased max number of files from 4096 to 32768 (enh) ++ ++ 20050320-20050410 ++ fixed two very long-standing YCbCr bugs in TIFF decoder (fix); ++ provisionally fixed bug in TIFF decoder for contiguous tiled TIFFs with ++ bottom-* orientation (fix/USE_TILED_TIFF_BOTLEFT_FIX option); fixed new ++ gcc 3.3 warnings (fix); fixed incorrect 16/24-bit display of xwd dumps ++ (fix); fixed multiple input-validation bugs (potential heap overflows) ++ and mktemp() dependencies (*SECURITY* fixes: CAN-2004-1725, CAN-2004- ++ 1726, CAN-2005-0665, CERT VU#622622, and others); added support for 16- ++ and 32-bit BMPs using bitfields "compression" (enh); fixed probable byte- ++ sex bug in 24-bit FixPix display code (enh/USE_24BIT_ENDIAN_FIX option); ++ fixed numerical-keypad NumLock behavior and delete-key behavior in file- ++ load/save window (enh); made schnauzer window and icons configurable (enh) + + 20050417 + incorporated "Japanese extension" patches, revision 5.3.3 (enh); fixed @@ -959,9 +452,118 @@ diff -ruN xv-3.10a-bugfixes/README.jumbo xv-3.10a-enhancements/README.jumbo + suffix" (xv_mgcsfx) config dir (enh); added PREFIX and DESTDIR support to + Makefile (enh); fixed handling of zero-length files and other text-viewer + failures (enh) -diff -ruN xv-3.10a-bugfixes/README.pcd xv-3.10a-enhancements/README.pcd ---- xv-3.10a-bugfixes/README.pcd 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/README.pcd 2001-07-08 11:21:19.000000000 -0700 ++ ++ 20050528 ++ conditionally added missing alloca.h to xvpcd.c (required if alloca() is ++ a macro and alloca.h not included in stdlib.h, for example); fixed bogus ++ __S_IWRITE introduced in 20050501 release; fixed Makefile "install" target ++ (mkdir, chmod); fixed bug in MUST macro in xvwbmp.c; fixed prototype ++ warnings in xvevent.c, xvpcd.c (JRK, GRR) ++ - xv-3.10a-jimkirk-fixes.patch ++ ++ 20050630 ++ fixed broken mkdir(.xvpics) introduced in 20050501 release (RJH, GRR); ++ tweaked GUNZIP config for OpenBSD (GRR) ++ - xv-3.10a-xvpics-mkdir-fix.patch ++ ++ 20051014 ++ fixed longstanding xvevent.c typo (wasJpegUp -> wasPngUp) that caused build ++ failure if no JPEG support (TAR) ++ ++ 20051019 ++ fixed Darwin (Mac OS X) build error in xv.h and vdcomp.c due to lack of ++ malloc.h (JDB) ++ ++ 20070210 ++ fixed minor grammos (GRR); promoted PNG to first position, demoted GIF to ++ third (GRR); changed internal type of default image to PNG (GRR); increased ++ max files again, to 65536 (GRR) ++ ++ 20070310 ++ incorporated JPEG-2000 patch (SBM, GRR); added manual fax options for ++ unrecognized G3 images (SBM); relaxed 30-byte minimum file size (SBM) ++ - http://www.ece.uvic.ca/~mdadams/jasper/software/xv-patches ++ ++ 20070318 ++ incorporated 16bps raw (binary) PPM patch (define ASSUME_RAW_PPM_LSB_FIRST ++ for old behavior) (RAC, GRR); updated format list, web sites in xv man page ++ (GRR); fixed Makefile "install" target to create any necessary directories ++ (RAC, GRR); fixed GIF decoder bug (sizes of global, local color tables ++ different) (GRR) ++ - xv-ross-combs-ppm-16bps-rawbits.patch ++ ++ 20070325 ++ fixed invalid gamma assumption in PNG decoder (=> progressive color changes ++ over load/save cycles) (GRR) ++ ++ 20070328 ++ fixed animated-GIF /tmp/xvpgXXXXXX droppings (GRR) ++ ++ 20070331 ++ fixed PNG duplicate-palette-entries bug (GRR) ++ ++ 20070415 ++ incorporated EXIF-preserve patch (GHK); added missing JP2/JPC VS bits code ++ (GRR); added extended-warning options to CCOPTS (RAC); added "const" to ++ huge number of function args (RAC, GRR); made more effectively static ++ functions officially static (RAC); added mouse-clickability (but not ++ selectability) to text-entry fields (RAC); fixed window positioning (race ++ conditions?) under some virtual window managers (e.g., tvtwm) (RAC); ++ removed explicit paths for external (de)compressors (GRR, RAC) ++ - xv-geoff-kuenning-jpeg-exif-preserve.patch ++ - xv-ross-combs-20070104.diff ++ ++ 20070422 ++ incorporated function-key-scripts patch (see contrib/fnkey-scripts) (AS); ++ fixed man-page-section extensions ("1", not "l" or "1X") (FG); switched to ++ more sensible install paths for docs (FG); added Fedora Core build script ++ (see contrib/fedora) (JC); fixed VS to switch from move-mode to copy-mode ++ if source dir is read-only (EAJ); extended VS incremental-search mode (EAJ) ++ - xv-alexey-spiridonov-20070116-fnkey-scripts.tar.bz2 ++ - xv-fabian-greffrath-20070215-debian-04-manpages.dpatch ++ - xv-fabian-greffrath-20070215-debian-03-makefiles.dpatch ++ - xv-john-cooper-Build-FC5-script.sh ++ - xv-erling-jacobsen-20060617-incr-search.patch ++ ++ 20070428 ++ modified install to include README.jumbo in docs (GRR); incorporated PNG ++ no-stdio patch (SBM); fixed XWD endianness support, improved performance ++ (replaces SJT 16/24-bit fix) (SBM) ++ - xv-scott-marovich-20070214-xvpng.diff ++ - xv-scott-marovich-20070214-xvxwd.c.patch ++ ++ 20070506 ++ added JPEG CMYK support (SBM); fixed TIFF (and others?) /tmp/xvpgXXXXXX ++ droppings (GRR); added VS clipboard support (JG) ++ - xv-scott-marovich-20070214-xvjpeg.c.patch ++ - xv-jurgen-grahn-20051127-schnauzer-clip.patch ++ ++ 20070512 ++ inverted handling of malloc.h header file to require NEED_MALLOC_H macro ++ for those few systems that actually need it (GRR) ++ ++ 20070513 ++ fixed GCC 4.1.x warnings (GRR); next round of const cleanup (GRR); fixed ++ minor TIFF memleak (GRR) ++ ++ 20070514 ++ fixed TIFF YCbCr reference black/white levels (SBM); added option to use ++ libjpeg YCbCr-to-RGB conversion for TIFF images (SBM, GRR) ++ - xv-scott-marovich-20070214-xvtiff.c.patch2.unified ++ - xv-scott-marovich-20070214-xvtiff.c.patch3.unified ++ ++ 20070519 ++ fixed handling of multi-page JPEG-compressed TIFFs (old or new) (SBM); ++ added TIFF YCbCr separated-color-plane support (may require libtiff ++ patch(es) to tif_ojpeg.c and/or tif_jpeg.c) (SBM) ++ - xv-scott-marovich-20070214-xvtiff.c.patch4.unified ++ - xv-scott-marovich-20070214-xvtiff.c.patch5.unified ++ ++ 20070520 ++ updated README.jumbo +diff -u -r --new-file xv-3.10a.orig/README.pcd xv-3.10a/README.pcd +--- xv-3.10a.orig/README.pcd 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/README.pcd 2001-07-08 13:21:19.000000000 -0500 @@ -0,0 +1,159 @@ +Copyright 1993-2001 David Clunie. + @@ -1122,21 +724,9 @@ diff -ruN xv-3.10a-bugfixes/README.pcd xv-3.10a-enhancements/README.pcd + + + -diff -ruN xv-3.10a-bugfixes/bggen.c xv-3.10a-enhancements/bggen.c ---- xv-3.10a-bugfixes/bggen.c 2004-05-16 17:50:52.000000000 -0700 -+++ xv-3.10a-enhancements/bggen.c 2005-04-17 14:04:22.000000000 -0700 -@@ -34,7 +34,7 @@ - #define MAXCOLS 128 - - /* some VMS thing... */ --#ifdef vax11c -+#if defined(vax11c) || (defined(__sony_news) && (defined(bsd43) || defined(__bsd43) || defined(SYSTYPE_BSD) || defined(__SYSTYPE_BSD))) - #include <ctype.h> - #endif - -diff -ruN xv-3.10a-bugfixes/bits/br_bzip2 xv-3.10a-enhancements/bits/br_bzip2 ---- xv-3.10a-bugfixes/bits/br_bzip2 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_bzip2 1998-04-12 19:23:39.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_bzip2 xv-3.10a/bits/br_bzip2 +--- xv-3.10a.orig/bits/br_bzip2 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_bzip2 1998-04-12 21:23:39.000000000 -0500 @@ -0,0 +1,27 @@ +#define br_bzip2_width 48 +#define br_bzip2_height 48 @@ -1165,9 +755,71 @@ diff -ruN xv-3.10a-bugfixes/bits/br_bzip2 xv-3.10a-enhancements/bits/br_bzip2 + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; -diff -ruN xv-3.10a-bugfixes/bits/br_mag xv-3.10a-enhancements/bits/br_mag ---- xv-3.10a-bugfixes/bits/br_mag 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_mag 2005-04-17 14:04:22.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_jp2 xv-3.10a/bits/br_jp2 +--- xv-3.10a.orig/bits/br_jp2 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_jp2 2005-05-09 00:00:27.000000000 -0500 +@@ -0,0 +1,27 @@ ++#define br_jp2_width 48 ++#define br_jp2_height 48 ++static unsigned char br_jp2_bits[] = { ++ 0xe0, 0xff, 0xff, 0xff, 0x01, 0x00, 0x20, 0x00, 0x00, 0x00, 0x03, 0x00, ++ 0x20, 0x00, 0x00, 0x00, 0x05, 0x00, 0x20, 0x00, 0x00, 0x00, 0x09, 0x00, ++ 0x20, 0x00, 0x00, 0x00, 0x11, 0x00, 0x20, 0x00, 0x00, 0x00, 0x21, 0x00, ++ 0x20, 0x00, 0x00, 0x00, 0x41, 0x00, 0x20, 0x00, 0x00, 0x00, 0x81, 0x00, ++ 0x20, 0x00, 0x00, 0x00, 0x01, 0x01, 0x20, 0x00, 0x00, 0x00, 0xff, 0x03, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0xff, 0xff, 0xff, 0x7f, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0xff, 0xff, 0xff, 0x7f, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0xfb, 0xf1, 0x01, 0x02, ++ 0x20, 0x00, 0xfb, 0xfb, 0x03, 0x02, 0x20, 0x00, 0x1b, 0x1b, 0x03, 0x02, ++ 0x20, 0x00, 0x1b, 0x1b, 0x00, 0x02, 0x20, 0x00, 0x1b, 0x1b, 0x00, 0x02, ++ 0x20, 0x00, 0x9b, 0x1b, 0x00, 0x02, 0x20, 0x00, 0xfb, 0x19, 0x00, 0x02, ++ 0x20, 0x00, 0xfb, 0x18, 0x00, 0x02, 0x20, 0x18, 0x1b, 0x18, 0x00, 0x02, ++ 0x20, 0x18, 0x1b, 0x18, 0x00, 0x02, 0x20, 0xb8, 0x1b, 0x18, 0x03, 0x02, ++ 0x20, 0xf0, 0x19, 0xf8, 0x03, 0x02, 0x20, 0xe0, 0x18, 0xf0, 0x01, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0xff, 0xff, 0xff, 0x7f, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0xff, 0xff, 0xff, 0x7f, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; +diff -u -r --new-file xv-3.10a.orig/bits/br_jpc xv-3.10a/bits/br_jpc +--- xv-3.10a.orig/bits/br_jpc 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_jpc 2005-05-09 00:00:27.000000000 -0500 +@@ -0,0 +1,27 @@ ++#define br_jpc_width 48 ++#define br_jpc_height 48 ++static unsigned char br_jpc_bits[] = { ++ 0xe0, 0xff, 0xff, 0xff, 0x01, 0x00, 0x20, 0x00, 0x00, 0x00, 0x03, 0x00, ++ 0x20, 0x00, 0x00, 0x00, 0x05, 0x00, 0x20, 0x00, 0x00, 0x00, 0x09, 0x00, ++ 0x20, 0x00, 0x00, 0x00, 0x11, 0x00, 0x20, 0x00, 0x00, 0x00, 0x21, 0x00, ++ 0x20, 0x00, 0x00, 0x00, 0x41, 0x00, 0x20, 0x00, 0x00, 0x00, 0x81, 0x00, ++ 0x20, 0x00, 0x00, 0x00, 0x01, 0x01, 0x20, 0x00, 0x00, 0x00, 0xff, 0x03, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0xff, 0xff, 0xff, 0x7f, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0xff, 0xff, 0xff, 0x7f, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0xfb, 0xf1, 0x01, 0x02, ++ 0x20, 0x00, 0xfb, 0xfb, 0x03, 0x02, 0x20, 0x00, 0x1b, 0x1b, 0x03, 0x02, ++ 0x20, 0x00, 0x1b, 0x03, 0x03, 0x02, 0x20, 0x00, 0x1b, 0x03, 0x03, 0x02, ++ 0x20, 0x00, 0x9b, 0x83, 0x01, 0x02, 0x20, 0x00, 0xfb, 0xc1, 0x01, 0x02, ++ 0x20, 0x00, 0xfb, 0xe0, 0x00, 0x02, 0x20, 0x18, 0x1b, 0x70, 0x00, 0x02, ++ 0x20, 0x18, 0x1b, 0x38, 0x00, 0x02, 0x20, 0xb8, 0x1b, 0x18, 0x00, 0x02, ++ 0x20, 0xf0, 0x19, 0xf8, 0x03, 0x02, 0x20, 0xe0, 0x18, 0xf8, 0x03, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0xff, 0xff, 0xff, 0x7f, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0xff, 0xff, 0xff, 0x7f, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, ++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; +diff -u -r --new-file xv-3.10a.orig/bits/br_mag xv-3.10a/bits/br_mag +--- xv-3.10a.orig/bits/br_mag 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_mag 2005-04-17 16:04:22.000000000 -0500 @@ -0,0 +1,27 @@ +#define br_mag_width 48 +#define br_mag_height 48 @@ -1196,9 +848,9 @@ diff -ruN xv-3.10a-bugfixes/bits/br_mag xv-3.10a-enhancements/bits/br_mag + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; -diff -ruN xv-3.10a-bugfixes/bits/br_maki xv-3.10a-enhancements/bits/br_maki ---- xv-3.10a-bugfixes/bits/br_maki 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_maki 2005-04-17 14:04:22.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_maki xv-3.10a/bits/br_maki +--- xv-3.10a.orig/bits/br_maki 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_maki 2005-04-17 16:04:22.000000000 -0500 @@ -0,0 +1,27 @@ +#define br_maki_width 48 +#define br_maki_height 48 @@ -1227,9 +879,9 @@ diff -ruN xv-3.10a-bugfixes/bits/br_maki xv-3.10a-enhancements/bits/br_maki + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; -diff -ruN xv-3.10a-bugfixes/bits/br_mgcsfx xv-3.10a-enhancements/bits/br_mgcsfx ---- xv-3.10a-bugfixes/bits/br_mgcsfx 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_mgcsfx 2005-04-17 14:04:22.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_mgcsfx xv-3.10a/bits/br_mgcsfx +--- xv-3.10a.orig/bits/br_mgcsfx 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_mgcsfx 2005-04-17 16:04:22.000000000 -0500 @@ -0,0 +1,27 @@ +#define br_mgcsfx_width 48 +#define br_mgcsfx_height 48 @@ -1258,9 +910,9 @@ diff -ruN xv-3.10a-bugfixes/bits/br_mgcsfx xv-3.10a-enhancements/bits/br_mgcsfx + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; -diff -ruN xv-3.10a-bugfixes/bits/br_pcd xv-3.10a-enhancements/bits/br_pcd ---- xv-3.10a-bugfixes/bits/br_pcd 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_pcd 1995-06-15 21:31:53.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_pcd xv-3.10a/bits/br_pcd +--- xv-3.10a.orig/bits/br_pcd 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_pcd 1995-06-15 23:31:53.000000000 -0500 @@ -0,0 +1,27 @@ +#define br_pcd_width 48 +#define br_pcd_height 48 @@ -1289,9 +941,9 @@ diff -ruN xv-3.10a-bugfixes/bits/br_pcd xv-3.10a-enhancements/bits/br_pcd + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; -diff -ruN xv-3.10a-bugfixes/bits/br_pi xv-3.10a-enhancements/bits/br_pi ---- xv-3.10a-bugfixes/bits/br_pi 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_pi 2005-04-17 14:04:22.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_pi xv-3.10a/bits/br_pi +--- xv-3.10a.orig/bits/br_pi 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_pi 2005-04-17 16:04:22.000000000 -0500 @@ -0,0 +1,27 @@ +#define br_pi_width 48 +#define br_pi_height 48 @@ -1320,9 +972,9 @@ diff -ruN xv-3.10a-bugfixes/bits/br_pi xv-3.10a-enhancements/bits/br_pi + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; -diff -ruN xv-3.10a-bugfixes/bits/br_pic xv-3.10a-enhancements/bits/br_pic ---- xv-3.10a-bugfixes/bits/br_pic 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_pic 2005-04-17 14:04:22.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_pic xv-3.10a/bits/br_pic +--- xv-3.10a.orig/bits/br_pic 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_pic 2005-04-17 16:04:22.000000000 -0500 @@ -0,0 +1,27 @@ +#define br_pic_width 48 +#define br_pic_height 48 @@ -1351,9 +1003,9 @@ diff -ruN xv-3.10a-bugfixes/bits/br_pic xv-3.10a-enhancements/bits/br_pic + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; -diff -ruN xv-3.10a-bugfixes/bits/br_pic2 xv-3.10a-enhancements/bits/br_pic2 ---- xv-3.10a-bugfixes/bits/br_pic2 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_pic2 2005-04-17 14:04:22.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_pic2 xv-3.10a/bits/br_pic2 +--- xv-3.10a.orig/bits/br_pic2 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_pic2 2005-04-17 16:04:22.000000000 -0500 @@ -0,0 +1,27 @@ +#define br_pic2_width 48 +#define br_pic2_height 48 @@ -1382,9 +1034,9 @@ diff -ruN xv-3.10a-bugfixes/bits/br_pic2 xv-3.10a-enhancements/bits/br_pic2 + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03}; -diff -ruN xv-3.10a-bugfixes/bits/br_png xv-3.10a-enhancements/bits/br_png ---- xv-3.10a-bugfixes/bits/br_png 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_png 1996-06-13 14:32:08.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_png xv-3.10a/bits/br_png +--- xv-3.10a.orig/bits/br_png 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_png 1996-06-13 16:32:08.000000000 -0500 @@ -0,0 +1,28 @@ +#define br_png_width 48 +#define br_png_height 48 @@ -1414,9 +1066,9 @@ diff -ruN xv-3.10a-bugfixes/bits/br_png xv-3.10a-enhancements/bits/br_png + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x02, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03, + }; -diff -ruN xv-3.10a-bugfixes/bits/br_zx xv-3.10a-enhancements/bits/br_zx ---- xv-3.10a-bugfixes/bits/br_zx 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/bits/br_zx 1998-08-06 13:00:03.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/bits/br_zx xv-3.10a/bits/br_zx +--- xv-3.10a.orig/bits/br_zx 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/bits/br_zx 1998-08-06 15:00:03.000000000 -0500 @@ -0,0 +1,28 @@ +#define br_zx_width 48 +#define br_zx_height 48 @@ -1446,2778 +1098,320 @@ diff -ruN xv-3.10a-bugfixes/bits/br_zx xv-3.10a-enhancements/bits/br_zx + 0x20, 0x00, 0x00, 0x84, 0x87, 0x03, 0x20, 0x00, 0x00, 0xc2, 0xc3, 0x03, + 0x20, 0x00, 0x00, 0xe1, 0xe1, 0x03, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x03, + }; -diff -ruN xv-3.10a-bugfixes/config.h xv-3.10a-enhancements/config.h ---- xv-3.10a-bugfixes/config.h 2005-03-21 23:21:31.000000000 -0800 -+++ xv-3.10a-enhancements/config.h 2005-04-30 23:52:42.000000000 -0700 -@@ -6,26 +6,46 @@ - /*************************************************************************** - * GZIP'd file support - * -- * if you have the gnu uncompression utility 'gunzip', XV can use it to -- * automatically 'unzip' any gzip'd files. To enable this feature, -- * change 'undef' to 'define' in the following line. Needless to say, if -- * your gunzip is installed elsewhere on your machine, change the 'GUNZIP' -- * definition appropriately. (use 'which gunzip' to find if you have gunzip, -- * and where it lives) -+ * if you have the GNU uncompression utility 'gunzip' (or 'gzip' itself, -+ * which is just a link to gunzip), XV can use it to automatically 'unzip' -+ * any gzip'd files. To enable this feature, change 'undef' to 'define' in -+ * the following line. Needless to say, if your gunzip is installed elsewhere -+ * on your machine, change the 'GUNZIP' definition appropriately. (use -+ * 'which gunzip' to find if you have gunzip, and where it lives; ditto for -+ * gzip) - */ --#undef USE_GUNZIP -+#define USE_GUNZIP - - #ifdef USE_GUNZIP - # ifdef VMS - # define GUNZIP "UNCOMPRESS" - # else --/* define GUNZIP "/usr/local/bin/gunzip -q" */ --# define GUNZIP "/usr/bin/gzip -dq" /* more portable */ -+# if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__linux__) -+# define GUNZIP "/usr/bin/gzip -dq" -+# else -+# define GUNZIP "/usr/local/bin/gzip -dq" /* is full path truly needed? */ -+# endif - # endif - #endif - - - /*************************************************************************** -+ * BZIP2'd file support -+ * -+ * if you have the uncompression utility 'bunzip2' (or 'bzip2' itself, which -+ * is just a link to bunzip2), XV can use it to automatically 'unzip' any -+ * bzip2'd files. To enable this feature, change 'undef' to 'define' in the -+ * following line (if not already done). Use 'which bunzip2' or 'which bzip2' -+ * to find if you have bzip2/bunzip2, and where it lives. -+ */ -+#define USE_BUNZIP2 -+ -+#ifdef USE_BUNZIP2 -+# define BUNZIP2 "bzip2 -d" /* should this include the full path? */ -+#endif -+ -+ -+/*************************************************************************** - * compress'd file support - * - * if you have GUNZIP defined above, just ignore this, as 'gunzip' can -@@ -38,7 +58,14 @@ - */ - #define UNCOMPRESS "/usr/ucb/uncompress" - --#if defined(hpux) || defined(SVR4) || defined(__386BSD__) -+#if defined(hpux) || defined(SVR4) || \ -+ defined(__386BSD__) || defined(__FreeBSD__) || defined(__NetBSD__) || \ -+ defined(__linux__) -+ /* -+ I want to use BSD macro for checking if this OS is *BSD or not, -+ but the macro is defined in <sys/parm.h>, which I don't know all -+ machine has or not. -+ */ - # undef UNCOMPRESS - # define UNCOMPRESS "/usr/bin/uncompress" - #endif -@@ -90,6 +117,7 @@ - */ - - /* #define GS_PATH "/usr/local/bin/gs" */ -+#define GS_PATH "/usr/bin/gs" - /* #define GS_LIB "." */ - /* #define GS_DEV "ppmraw" */ - -@@ -120,3 +148,201 @@ - - #define BACKING_STORE - -+ -+/*************************************************************************** -+ * PhotoCD/MAG/PIC/MAKI/Pi/PIC2/HIPS format Support: -+ * -+ * if, for whatever reason--say, security concerns--you don't want to -+ * include support for one or more of the PhotoCD, MAG/MAKI/Pi/PIC/PIC2 -+ * (Japanese), or HIPS (astronomical) image formats, change the relevant -+ * 'define' to 'undef' in the following lines. Conversely, if you *do* -+ * want them, change 'undef' to 'define' as appropriate. -+ */ -+ -+#define HAVE_PCD /* believed to be reasonably safe */ -+ -+#undef HAVE_MAG /* probable security issues */ -+#undef HAVE_MAKI /* probable security issues */ -+#undef HAVE_PI /* probable security issues */ -+#undef HAVE_PIC /* probable security issues */ -+#undef HAVE_PIC2 /* probable security issues */ -+ -+#undef HAVE_HIPS /* probable security issues */ -+ -+ -+/*************************************************************************** -+ * MacBinary file support: -+ * -+ * if you want XV to be able to handle ``MacBinary'' files (which have -+ * 128 byte info file header at the head), change 'undef' to 'define' -+ * in the following line. -+ */ -+ -+#undef MACBINARY -+ -+ -+/*************************************************************************** -+ * Auto Expand support: -+ * -+ * if you want to extract archived file automatically and regard it as -+ * a directory, change 'undef' to 'define' in the AUTO_EXPAND line. -+ * -+ * Virtual Thumbdir support: -+ * -+ * if you want Virtual directory based Thumbdir(It means that XV -+ * doesn't forget builded Icons still be quited even if the directory -+ * is read-only), change 'undef' to 'define' the VIRTUAL_TD line. -+ */ -+ -+#undef AUTO_EXPAND -+#undef VIRTUAL_TD -+ -+#if defined(VIRTUAL_TD) && !defined(AUTO_EXPAND) -+# undef VIRTUAL_TD -+#endif -+ -+ -+/*************************************************************************** -+ * Adjust the aspect ratio of Icons: -+ * -+ * if you want to adjust the aspect ratio of the icons in Visual -+ * Schnauzer, change 'undef' to 'define' in the following line. -+ */ -+ -+#undef VS_ADJUST -+ -+ -+/*************************************************************************** -+ * Restore original colormap: -+ * -+ * if you want to restore original colormap when icons in Visual -+ * Shunauzer is double-clicked, change 'undef' to 'define' in the -+ * following line. -+ */ -+ -+#undef VS_RESCMAP -+ -+ -+/*************************************************************************** -+ * TextViewer l10n support: -+ * -+ * if you want XV to show the text in Japanese on TextViewer, change -+ * 'undef' to 'define' in the following line. -+ */ -+ -+#undef TV_L10N -+ -+#ifdef TV_L10N -+/* -+ * if you want to change the default code-set used in case that XV -+ * fails to select correct code-set, uncomment the '#define -+ * LOCALE_DEFAULT' line and change the 'LOCALE_DEFAULT' definition -+ * appropriately. -+ * (0:ASCII, 1:EUC-j, 2:JIS, 3:MS Kanji) */ -+ -+/* # define LOCALE_DEFAULT 0 */ -+ -+/* -+ * Uncomment and edit the following lines, if your X Window System was -+ * not compiled with -DX_LOCALE and you failed to display the Japanese -+ * text in TextViewer. You don't have to write locale name of JIS code-set -+ * and Microsoft code-set, if your system doesn't support those code-sets. -+ */ -+ -+/* -+# define LOCALE_NAME_EUC "ja_JP.EUC" -+# define LOCALE_NAME_JIS "ja_JP.JIS" -+# define LOCALE_NAME_MSCODE "ja_JP.SJIS" -+*/ -+ -+/* -+ * if your system doesn't have the Japanese fonts in the sizes, -+ * Uncomment and edit the following font size entries. -+ */ -+ -+/* # define TV_FONTSIZE 14,16,24 */ -+ -+/* -+ * If you need, uncomment and modify the following font name. -+ */ -+ -+/* # define TV_FONTSET "-*-fixed-medium-r-normal--%d-*" */ -+#endif /* TV_L10N */ -+ -+ -+/*************************************************************************** -+ * User definable filter support: -+ * -+ * Use the filters as input and output method for load and save unsupported -+ * image format file. The filter command is recognized by definition of -+ * magic number or suffix in "~/.xv_mgcsfx" . -+ * To enable this feature, change 'undef' to 'define' in the following line. -+ */ -+#undef HAVE_MGCSFX -+ -+#ifdef HAVE_MGCSFX -+/* -+ * Support symbol 'auto' as <input image type> in startup file. This type -+ * cannot use pipe as input; it writes to a temporary file and recognizes -+ * the actual filetype by XV processing. -+ */ -+# define HAVE_MGCSFX_AUTO -+ -+/* -+ * The startup file of definition for MgcSfx. 'MGCSFX_SITE_RC' is read -+ * first and '~/MGCSFX_RC' is second. So same definitions in both files -+ * are overridden by '~/MGCSFX_RC' -+ * To define startup file, see the sample of startup file 'xv_mgcsfx.sample'. -+ */ -+# define MGCSFX_SITE_RC "xv_mgcsfx" -+# define MGCSFX_RC ".xv_mgcsfx" -+ -+/* -+ * If you want startup file to pass preprocessor in reading time, then -+ * change 'undef' to 'define' in the following line. -+ * -+ * WARNING : If you decide to use preprocessor, you must not write -+ * '# <comment>' style comment in startup file. Because, -+ * preprocessor can't recognize. */ -+# undef USE_MGCSFX_PREPROCESSOR -+ -+# ifdef USE_MGCSFX_PREPROCESSOR -+/* -+ * This is used like "system("MGCSFX_PREPROCESSOR MGCSFX_RC > tmp_name");", -+ * and read tmp_name instead of MGCSFX_RC. -+ */ -+# define MGCSFX_PREPROCESSOR "/usr/lib/cpp" -+/* # define MGCSFX_PREPROCESSOR "cc -E" */ -+ -+# endif /* USE_MGCSFX_PREPROCESSOR */ -+ -+/* -+ * Default string of command. If input command is required for undefined file, -+ * dialog is popuped with 'MGCSFX_DEFAULT_INPUT_COMMAND'. And, if output -+ * command is required in save dialog of MgcSfx, dialog is popuped with -+ * 'MGCSFX_DEFAULT_OUTPUT_COMMAND'. -+ * -+ * WARNING : Now, supported only 'PNM' image format, when command input is -+ * required. You should define filter which use 'PNM' image format -+ * as input or output. -+ */ -+# define MGCSFX_DEFAULT_INPUT_COMMAND "tifftopnm" -+# define MGCSFX_DEFAULT_OUTPUT_COMMAND "pnmtotiff" -+ -+#endif /* HAVE_MGCSFX */ -+ -+ -+/*************************************************************************** -+ * Multi-Lingual TextViewer -+ * -+ * if you want XV to show the text in multi-lingual on TextViewer, change -+ * 'undef' to 'define' in the following line. -+ */ -+ -+#undef TV_MULTILINGUAL -+ -+#define TV_DEFAULT_CODESET TV_EUC_JAPAN -+ -+#ifdef TV_MULTILINGUAL -+# undef TV_L10N -+#endif -diff -ruN xv-3.10a-bugfixes/tiff/Makefile xv-3.10a-enhancements/tiff/Makefile ---- xv-3.10a-bugfixes/tiff/Makefile 2004-05-16 18:49:11.000000000 -0700 -+++ xv-3.10a-enhancements/tiff/Makefile 2005-04-17 14:45:28.000000000 -0700 -@@ -38,7 +38,7 @@ - IPATH= -I. - - COPTS= -O --CFLAGS= ${COPTS} ${IPATH} -+CFLAGS= ${COPTS} ${IPATH} -D_BSD_SOURCE - - INCS= tiff.h tiffio.h - -diff -ruN xv-3.10a-bugfixes/vdcomp.c xv-3.10a-enhancements/vdcomp.c ---- xv-3.10a-bugfixes/vdcomp.c 2005-03-20 17:48:59.000000000 -0800 -+++ xv-3.10a-enhancements/vdcomp.c 2005-04-17 22:59:39.000000000 -0700 -@@ -106,6 +106,7 @@ - !defined(pyr) && \ - !defined(__UMAXV__) && \ - !defined(bsd43) && \ -+ !defined(__bsd43) && \ - !defined(aux) && \ - !defined(__bsdi__) && \ - !defined(sequent) && \ -@@ -115,7 +116,14 @@ - # if defined(hp300) || defined(hp800) || defined(NeXT) - # include <sys/malloc.h> /* it's in 'sys' on HPs and NeXT */ - # else --# include <malloc.h> -+# if !defined(__386BSD__) && !defined(__FreeBSD__) && !defined(__NetBSD__) -+ /* -+ I want to use BSD macro for checking if this OS is *BSD or not, -+ but the macro is defined in <sys/parm.h>, which I don't know all -+ machine has or not. -+ */ -+# include <malloc.h> -+# endif - # endif - # endif - #endif /* !VMS */ -diff -ruN xv-3.10a-bugfixes/xcmap.c xv-3.10a-enhancements/xcmap.c ---- xv-3.10a-bugfixes/xcmap.c 2005-03-20 15:51:59.000000000 -0800 -+++ xv-3.10a-enhancements/xcmap.c 2005-04-17 14:45:28.000000000 -0700 -@@ -163,7 +163,7 @@ - XSetBackground(theDisp,theGC,bcol); - - CreateMainWindow(cmd,geom,argc,argv); -- Resize(WIDE,HIGH); -+ Resize((int)WIDE,(int)HIGH); - - XSelectInput(theDisp, mainW, ExposureMask | KeyPressMask - | StructureNotifyMask | ButtonPressMask); -@@ -212,10 +212,10 @@ - - case ConfigureNotify: { - XConfigureEvent *conf_event = (XConfigureEvent *) event; -+ int w = conf_event->width, h = conf_event->height; - -- if (conf_event->window == mainW && -- (conf_event->width != WIDE || conf_event->height != HIGH)) -- Resize(conf_event->width, conf_event->height); -+ if (conf_event->window == mainW && (w != WIDE || h != HIGH)) -+ Resize((int)(w ? w : WIDE), (int)(h ? h : HIGH)); - } - break; - -@@ -274,6 +274,8 @@ - WIDE = HIGH = 256; /* default window size */ - - x=y=w=h=1; -+ hints.flags = 0; -+ - i=XParseGeometry(geom,&x,&y,&w,&h); - if (i&WidthValue) - { -diff -ruN xv-3.10a-bugfixes/xv.c xv-3.10a-enhancements/xv.c ---- xv-3.10a-bugfixes/xv.c 2005-03-20 22:25:22.000000000 -0800 -+++ xv-3.10a-enhancements/xv.c 2005-05-01 13:33:25.000000000 -0700 -@@ -62,6 +62,19 @@ - - static char basefname[128]; /* just the current fname, no path */ - -+#ifdef TV_L10N -+# ifndef TV_FONTSET -+# define TV_FONTSET "-*-fixed-medium-r-normal--%d-*" -+# endif -+# ifndef TV_FONTSIZE -+# define TV_FONTSIZE 14,16 -+# endif -+ -+static int mfontsize[] = { TV_FONTSIZE, 0 }; -+static char mfontset[256]; -+#endif -+ -+ - /* things to do upon successfully loading an image */ - static int autoraw = 0; /* force raw if using stdcmap */ - static int autodither = 0; /* dither */ -@@ -78,6 +91,12 @@ - - static int force8 = 0; /* force 8-bit mode */ - static int force24 = 0; /* force 24-bit mode */ -+#ifdef HAVE_PCD -+static int PcdSize = -1; /* force dialog to ask */ -+#endif -+ -+static float waitsec_nonfinal = -1; /* "normal" waitsec value */ -+static float waitsec_final = -1; /* final-image waitsec value */ - - /* used in DeleteCmd() and Quit() */ - static char **mainargv; -@@ -103,7 +122,6 @@ - static void openNextLoop PARM((void)); - static void openPrevPic PARM((void)); - static void openNamedPic PARM((void)); --static int findRandomPic PARM((void)); - static void mainLoop PARM((void)); - static void createMainWindow PARM((char *, char *)); - static void setWinIconNames PARM((char *)); -@@ -120,16 +138,17 @@ - int imap, ctrlmap, gmap, browmap, cmtmap, clrroot, nopos, limit2x; - char *display, *whitestr, *blackstr, *histr, *lostr, - *infogeom, *fgstr, *bgstr, *ctrlgeom, *gamgeom, *browgeom, *tmpstr; --char *rootfgstr, *rootbgstr, *visualstr, *textgeom, *cmtgeom; -+char *rootfgstr, *rootbgstr, *imagebgstr, *visualstr, *textgeom, *cmtgeom; - char *monofontname, *flistName; -+#ifdef TV_L10N -+char **misscharset, *defstr; -+int nmisscharset; -+#endif - int curstype, stdinflag, browseMode, savenorm, preview, pscomp, preset, - rmodeset, gamset, cgamset, perfect, owncmap, rwcolor, stdcmap; - int nodecor; - double gamval, rgamval, ggamval, bgamval; - -- -- -- - /*******************************************/ - int main(argc, argv) - int argc; -@@ -137,6 +156,9 @@ - /*******************************************/ - { - int i; -+#ifdef TV_L10N -+ int j; -+#endif - XColor ecdef; - Window rootReturn, parentReturn, *children; - unsigned int numChildren, rootDEEP; -@@ -153,6 +175,13 @@ - /*** variable Initialization ***/ - /*****************************************************/ - -+#ifdef TV_L10N -+ /* setlocale(LC_ALL, localeList[LOCALE_EUCJ]); */ -+ setlocale(LC_ALL, ""); -+ xlocale = (int)XSupportsLocale(); /* assume that (Bool) is (int) */ -+ /* if X doesn't support ja_JP.ujis text viewer l10n doesn't work. */ -+#endif -+ - xv_getwd(initdir, sizeof(initdir)); - searchdir[0] = '\0'; - fullfname[0] = '\0'; -@@ -162,7 +191,7 @@ - - /* init internal variables */ - display = NULL; -- fgstr = bgstr = rootfgstr = rootbgstr = NULL; -+ fgstr = bgstr = rootfgstr = rootbgstr = imagebgstr = NULL; - histr = lostr = whitestr = blackstr = NULL; - visualstr = monofontname = flistName = NULL; - winTitle = NULL; -@@ -180,6 +209,7 @@ - autoclose = autoDelete = 0; - cmapInGam = 0; - grabDelay = 0; -+ startGrab = 0; - showzoomcursor = 0; - perfect = owncmap = stdcmap = rwcolor = 0; - -@@ -228,6 +258,10 @@ - if (!tmpdir) FatalError("can't malloc 'tmpdir'\n"); - strcpy(tmpdir, tmpstr); - } -+#ifdef AUTO_EXPAND -+ Vdinit(); -+ vd_handler_setup(); -+#endif - - /* init command-line options flags */ - infogeom = DEFINFOGEOM; ctrlgeom = DEFCTRLGEOM; -@@ -238,7 +272,7 @@ - ninstall = 0; fixedaspect = 0; noFreeCols = nodecor = 0; - DEBUG = 0; bwidth = 2; - nolimits = useroot = clrroot = noqcheck = 0; -- waitsec = -1; waitloop = 0; automax = 0; -+ waitsec = waitsec_final = -1.0; waitloop = 0; automax = 0; - rootMode = 0; hsvmode = 0; - rmodeset = gamset = cgamset = 0; - nopos = limit2x = 0; -@@ -251,6 +285,10 @@ - preset = 0; - viewonly = 0; - -+#ifdef ENABLE_FIXPIX_SMOOTH -+ do_fixpix_smooth = 0; -+#endif -+ - /* init 'xormasks' array */ - xorMasks[0] = 0x01010101; - xorMasks[1] = 0x02020203; -@@ -277,6 +315,24 @@ - tiffW = (Window) NULL; tiffUp = 0; - #endif - -+#ifdef HAVE_PNG -+ pngW = (Window) NULL; pngUp = 0; -+#endif -+ -+ pcdW = (Window) NULL; pcdUp = 0; -+ -+#ifdef HAVE_PIC2 -+ pic2W = (Window) NULL; pic2Up = 0; -+#endif -+ -+#ifdef HAVE_PCD -+ pcdW = (Window) NULL; pcdUp = 0; -+#endif -+ -+#ifdef HAVE_MGCSFX -+ mgcsfxW = (Window) NULL; mgcsfxUp = 0; -+#endif -+ - imap = ctrlmap = gmap = browmap = cmtmap = 0; - - ch_offx = ch_offy = p_offx = p_offy = 0; -@@ -303,13 +359,35 @@ - verifyArgs(); - - -+#if 0 -+#ifdef XVEXECPATH -+ /* set up path to search for external executables */ -+ { -+ char *systempath = getenv("PATH"); -+ char *xvexecpath = getenv("XVPATH"); -+ if (xvexecpath == NULL) xvexecpath = XVEXECPATH; -+ /* FIXME: can systempath == NULL? */ -+ strcat(systempath, ":"); /* FIXME: writing to mem we don't own */ -+ strcat(systempath, xvexecpath); /* FIXME: writing to mem we don't own */ -+ /* FIXME: was there supposed to be a setenv() call in here? */ -+ if (DEBUG) -+ fprintf(stderr, "DEBUG: executable search path: %s\n", systempath); -+ } -+#endif -+#endif -+ -+ - /*****************************************************/ - /*** X Setup ***/ - /*****************************************************/ - - theScreen = DefaultScreen(theDisp); - theCmap = DefaultColormap(theDisp, theScreen); -- rootW = RootWindow(theDisp,theScreen); -+ if (spec_window) { -+ rootW = spec_window; -+ } else { -+ rootW = RootWindow(theDisp,theScreen); -+ } - theGC = DefaultGC(theDisp,theScreen); - theVisual = DefaultVisual(theDisp,theScreen); - ncells = DisplayCells(theDisp, theScreen); -@@ -320,7 +398,7 @@ - - rootDEEP = dispDEEP; - -- /* things dependant on theVisual: -+ /* things dependent on theVisual: - * dispDEEP, theScreen, rootW, ncells, theCmap, theGC, - * vrWIDE, dispWIDE, vrHIGH, dispHIGH, maxWIDE, maxHIGH - */ -@@ -500,6 +578,7 @@ - arrow = XCreateFontCursor(theDisp,(u_int) curstype); - cross = XCreateFontCursor(theDisp,XC_crosshair); - tcross = XCreateFontCursor(theDisp,XC_tcross); -+ tlcorner = XCreateFontCursor(theDisp,XC_top_left_corner); - zoom = XCreateFontCursor(theDisp,XC_sizing); - - { -@@ -575,6 +654,18 @@ - xvAllocColor(theDisp, theCmap, &ecdef)) rootbg = ecdef.pixel; - - -+ /* GRR 19980308: set up image bg color (for transparent images) */ -+ have_imagebg = 0; -+ if (imagebgstr && XParseColor(theDisp, theCmap, imagebgstr, &ecdef) && -+ xvAllocColor(theDisp, theCmap, &ecdef)) { -+ /* imagebg = ecdef.pixel; */ -+ have_imagebg = 1; -+ imagebgR = ecdef.red; -+ imagebgG = ecdef.green; -+ imagebgB = ecdef.blue; -+ } -+ -+ - /* set up hi/lo colors */ - i=0; - if (dispDEEP > 1) { /* only if we're on a reasonable display */ -@@ -664,6 +755,61 @@ - - monofont=monofinfo->fid; - -+#ifdef TV_L10N -+ if (xlocale) { -+ i = 0; -+ while (mfontsize[i]) { -+ xlocale = 1; /* True */ -+ -+ sprintf(mfontset, TV_FONTSET, mfontsize[i]); -+/*fprintf(stderr, "FontSet: %s\n", mfontset);*/ -+ -+ monofset = XCreateFontSet(theDisp, mfontset, -+ &misscharset, &nmisscharset, &defstr); -+# if 0 /* not useful */ -+ if (!monofset) { -+ /* the current locale is not supported */ -+/*fprintf(stderr, "Current locale `%s' is not supported.\n", localeList[i]);*/ -+ xlocale = 0; -+ break; -+ } -+# endif -+/*fprintf(stderr, "# of misscharset in mfontsize[%d]: %d\n", i,nmisscharset);*/ -+ -+ for (j = 0; j < nmisscharset; j++) { -+ if (!strncmp(misscharset[j], "jisx0208", 8)) { -+ /* font for JIS X 0208 is not found */ -+ xlocale = 0; -+ break; -+ } -+ } +diff -u -r --new-file xv-3.10a.orig/contrib/fedora/Build-FC5 xv-3.10a/contrib/fedora/Build-FC5 +--- xv-3.10a.orig/contrib/fedora/Build-FC5 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/contrib/fedora/Build-FC5 2006-06-01 10:12:47.000000000 -0500 +@@ -0,0 +1,56 @@ ++#!/bin/bash ++# ++# prep and build XV for FC5 ++# ++# adapted from Slackware 10.2 -- john.cooper@third-harmonic.com ++# + -+ if (xlocale) { -+ monofsetinfo = XExtentsOfFontSet(monofset); -+ monofsetinfo->max_logical_extent.width = mfontsize[i]; -+ /* correct size of TextViewer -+ in case that JIS X 0208 is not found */ -+ break; -+ } ++if [ ${1}foo == "__LOGGED__foo" ]; then ++ shift ++else ++ for i in `seq 0 9` ++ do ++ if [ -e ${0}.log.$((9-i)) ]; then ++ mv ${0}.log.$((9-i)) ${0}.log.$((9-i+1)) ++ fi ++ done + -+ i++; -+ } /* while (mfontsize[i]) */ ++ exec $0 __LOGGED__ $@ 2>&1 | tee $BUILDDIR/$0.log.0 ++ exit $? ++fi + -+# if 0 -+ if (nmisscharset > 0) { -+ sprintf(str,"missing %d charset:\n", nmisscharset); -+ for (i = 0; i < nmisscharset; i++) { -+ sprintf(str, "%s\t%s\n", str, misscharset[i]); -+ } -+# if 0 -+ FatalError(str); -+# else -+ fprintf(stderr, "%s", str); -+# endif -+ } -+# endif -+ } -+#endif /* TV_L10N */ - - - -@@ -693,6 +839,18 @@ - } - else namelist[0] = NULL; - } -+ else if (randomShow) { -+ int i, j; -+ char *tmp; ++SOURCE=`pwd` ++if [ "$BUILD" = "" ]; then ++ BUILD=./build ++fi + -+ srandom((int)time((time_t *)0)); -+ for (i = numnames; i > 1; i--) { -+ j = random() % i; -+ tmp = namelist[i-1]; -+ namelist[i-1] = namelist[j]; -+ namelist[j] = tmp; -+ } -+ } - - if (numnames) makeDispNames(); - -@@ -796,6 +954,25 @@ - XSetTransientForHint(theDisp, tiffW, dirW); - #endif - -+#ifdef HAVE_PNG -+ CreatePNGW(); -+ XSetTransientForHint(theDisp, pngW, dirW); -+#endif ++if [ ! -d $BUILD ]; then ++ mkdir -p $BUILD ++fi + -+#ifdef HAVE_PCD -+ CreatePCDW(); -+ XSetTransientForHint(theDisp, pcdW, dirW); -+#endif ++PFLAGS="--verbose --backup --suffix=.orig" + -+#ifdef HAVE_PIC2 -+ CreatePIC2W(); -+ XSetTransientForHint(theDisp, pic2W, dirW); -+#endif -+ -+#ifdef HAVE_MGCSFX -+ CreateMGCSFXW(); -+ XSetTransientForHint(theDisp, mgcsfxW, dirW); -+#endif - - LoadFishCursors(); - SetCursors(-1); -@@ -964,7 +1141,11 @@ - - dispDEEP = vinfo[best].depth; - theScreen = vinfo[best].screen; -- rootW = RootWindow(theDisp, theScreen); -+ if (spec_window) { -+ rootW = spec_window; -+ } else { -+ rootW = RootWindow(theDisp,theScreen); -+ } - ncells = vinfo[best].colormap_size; - theCmap = XCreateColormap(theDisp, rootW, theVisual, AllocNone); - -@@ -1095,6 +1276,9 @@ - - if (rd_str ("fileList")) flistName = def_str; - if (rd_flag("fixed")) fixedaspect = def_int; -+#ifdef ENABLE_FIXPIX_SMOOTH -+ if (rd_flag("fixpix")) do_fixpix_smooth = def_int; -+#endif - if (rd_flag("force8")) force8 = def_int; - if (rd_flag("force24")) force24 = def_int; - if (rd_str ("foreground")) fgstr = def_str; -@@ -1106,21 +1290,37 @@ - if (rd_str ("highlight")) histr = def_str; - if (rd_str ("iconGeometry")) icongeom = def_str; - if (rd_flag("iconic")) startIconic = def_int; -+ if (rd_str ("imageBackground")) imagebgstr = def_str; - if (rd_str ("infoGeometry")) infogeom = def_str; - if (rd_flag("infoMap")) imap = def_int; - if (rd_flag("loadBrowse")) browseMode = def_int; - if (rd_str ("lowlight")) lostr = def_str; -+#ifdef MACBINARY -+ if (rd_flag("macbinary")) handlemacb = def_int; -+#endif -+#ifdef HAVE_MGCSFX -+ if (rd_flag("mgcsfx")) mgcsfx = def_int; -+#endif - if (rd_flag("mono")) mono = def_int; - if (rd_str ("monofont")) monofontname = def_str; - if (rd_int ("ncols")) ncols = def_int; - if (rd_flag("ninstall")) ninstall = def_int; - if (rd_flag("nodecor")) nodecor = def_int; - if (rd_flag("nolimits")) nolimits = def_int; -+#ifdef HAVE_MGCSFX -+ if (rd_flag("nomgcsfx")) nomgcsfx = def_int; -+#endif -+#if defined(HAVE_PIC) || defined(HAVE_PIC2) -+ if (rd_flag("nopicadjust")) nopicadjust = def_int; -+#endif - if (rd_flag("nopos")) nopos = def_int; - if (rd_flag("noqcheck")) noqcheck = def_int; - if (rd_flag("nostat")) nostat = def_int; - if (rd_flag("ownCmap")) owncmap = def_int; - if (rd_flag("perfect")) perfect = def_int; -+#ifdef HAVE_PIC2 -+ if (rd_flag("pic2split")) pic2split = def_int; -+#endif - if (rd_flag("popupKludge")) winCtrPosKludge = def_int; - if (rd_str ("print")) strncpy(printCmd, def_str, - (size_t) PRINTCMDLEN); -@@ -1138,6 +1338,9 @@ - if (rd_str ("textviewGeometry")) textgeom = def_str; - if (rd_flag("useStdCmap")) stdcmap = def_int; - if (rd_str ("visual")) visualstr = def_str; -+#ifdef VS_ADJUST -+ if (rd_flag("vsadjust")) vsadjust = def_int; -+#endif - if (rd_flag("vsDisable")) novbrowse = def_int; - if (rd_str ("vsGeometry")) browgeom = def_str; - if (rd_flag("vsMap")) browmap = def_int; -@@ -1172,7 +1375,13 @@ - } - - if (numnames<MAXNAMES) { -+#ifdef AUTO_EXPAND -+ if(Isarchive(argv[i]) == 0){ /* Not archive file */ -+ namelist[numnames++] = argv[i]; ++function bail() ++ { ++ echo "$0: failed $1" ++ exit 1 + } -+#else - namelist[numnames++] = argv[i]; -+#endif - if (numnames==MAXNAMES) { - fprintf(stderr,"%s: too many filenames. Only using first %d.\n", - cmd, MAXNAMES); -@@ -1198,6 +1407,14 @@ - } - } - -+ else if (!argcmp(argv[i],"-windowid",3,0,&pm)) { -+ if (++i<argc) { -+ if (sscanf(argv[i], "%ld", &spec_window) != 1) { -+ fprintf(stderr,"%s: bad argument to -windowid '%s'\n",cmd,argv[i]); -+ } -+ } -+ } -+ - else if (!argcmp(argv[i],"-best24",3,0,&pm)) /* -best */ - conv24 = CONV24_BEST; - -@@ -1289,7 +1506,11 @@ - else if (!argcmp(argv[i],"-fg",3,0,&pm)) /* fg color */ - { if (++i<argc) fgstr = argv[i]; } - -- else if (!argcmp(argv[i],"-fixed",3,1,&fixedaspect)); /* fix asp. ratio */ -+ else if (!argcmp(argv[i],"-fixed",5,1,&fixedaspect)); /* fix asp. ratio */ -+ -+#ifdef ENABLE_FIXPIX_SMOOTH -+ else if (!argcmp(argv[i],"-fixpix",5,1,&do_fixpix_smooth)); /* dithering */ -+#endif - - else if (!argcmp(argv[i],"-flist",3,0,&pm)) /* file list */ - { if (++i<argc) flistName = argv[i]; } -@@ -1330,6 +1551,10 @@ - { if (++i<argc) infogeom = argv[i]; } - - else if (!argcmp(argv[i],"-imap", 3,1,&imap)); /* imap */ -+ -+ else if (!argcmp(argv[i],"-ibg",3,0,&pm)) /* GRR: image background color */ -+ { if (++i<argc) imagebgstr = argv[i]; } -+ - else if (!argcmp(argv[i],"-lbrowse", 3,1,&browseMode)); /* browse mode */ - - else if (!argcmp(argv[i],"-lo",3,0,&pm)) /* lowlight */ -@@ -1354,9 +1579,17 @@ - else if (!argcmp(argv[i],"-maxpect",5,1,&pm)) /* auto maximize */ - { automax=pm; fixedaspect=pm; } - -+#ifdef MACBINARY -+ else if (!argcmp(argv[i],"-macbinary",3,1,&handlemacb)); /* macbinary */ -+#endif -+ - else if (!argcmp(argv[i],"-mfn",3,0,&pm)) /* mono font name */ - { if (++i<argc) monofontname = argv[i]; } - -+#ifdef HAVE_MGCSFX -+ else if (!argcmp(argv[i],"-mgcsfx", 4,1,&mgcsfx)); /* mgcsfx */ -+#endif -+ - else if (!argcmp(argv[i],"-mono",3,1,&mono)); /* mono */ - - else if (!argcmp(argv[i],"-name",3,0,&pm)) /* name */ -@@ -1365,17 +1598,30 @@ - else if (!argcmp(argv[i],"-ncols",3,0,&pm)) /* ncols */ - { if (++i<argc) ncols=abs(atoi(argv[i])); } - -- else if (!argcmp(argv[i],"-ninstall", 3,1,&ninstall)); /* inst cmaps?*/ -+ else if (!argcmp(argv[i],"-ninstall", 3,1,&ninstall)); /* inst cmaps? */ - else if (!argcmp(argv[i],"-nodecor", 4,1,&nodecor)); - else if (!argcmp(argv[i],"-nofreecols",4,1,&noFreeCols)); - else if (!argcmp(argv[i],"-nolimits", 4,1,&nolimits)); /* nolimits */ -+#ifdef HAVE_MGCSFX -+ else if (!argcmp(argv[i],"-nomgcsfx", 4,1,&nomgcsfx)); /* nomgcsfx */ -+#endif -+#if defined(HAVE_PIC) || defined(HAVE_PIC2) -+ else if (!argcmp(argv[i],"-nopicadjust", 4,1,&nopicadjust));/*nopicadjust*/ -+#endif - else if (!argcmp(argv[i],"-nopos", 4,1,&nopos)); /* nopos */ - else if (!argcmp(argv[i],"-noqcheck", 4,1,&noqcheck)); /* noqcheck */ -- else if (!argcmp(argv[i],"-noresetroot",5,1,&resetroot)); /* reset root*/ -+ else if (!argcmp(argv[i],"-noresetroot",5,1,&resetroot)); /* reset root */ - else if (!argcmp(argv[i],"-norm", 5,1,&autonorm)); /* norm */ - else if (!argcmp(argv[i],"-nostat", 4,1,&nostat)); /* nostat */ - else if (!argcmp(argv[i],"-owncmap", 2,1,&owncmap)); /* own cmap */ -+#ifdef HAVE_PCD -+ else if (!argcmp(argv[i],"-pcd", 4,0,&pm)) /* pcd with size */ -+ { if (i+1<argc) PcdSize = atoi(argv[++i]); } -+#endif - else if (!argcmp(argv[i],"-perfect", 3,1,&perfect)); /* -perfect */ -+#ifdef HAVE_PIC2 -+ else if (!argcmp(argv[i],"-pic2split", 3,1,&pic2split)); /* pic2split */ -+#endif - else if (!argcmp(argv[i],"-pkludge", 3,1,&winCtrPosKludge)); - else if (!argcmp(argv[i],"-poll", 3,1,&polling)); /* chk mod? */ - -@@ -1418,6 +1664,7 @@ - conv24 = CONV24_SLOW; - - else if (!argcmp(argv[i],"-smooth",3,1,&autosmooth)); /* autosmooth */ -+ else if (!argcmp(argv[i],"-startgrab",3,1,&startGrab)); /* startGrab */ - else if (!argcmp(argv[i],"-stdcmap",3,1,&stdcmap)); /* use stdcmap */ - - else if (!argcmp(argv[i],"-tgeometry",2,0,&pm)) /* textview geom */ -@@ -1429,6 +1676,10 @@ - else if (!argcmp(argv[i],"-visual",4,0,&pm)) /* visual */ - { if (++i<argc) visualstr = argv[i]; } - -+#ifdef VS_ADJUST -+ else if (!argcmp(argv[i],"-vsadjust", 3,1,&vsadjust)); /* vsadjust */ -+#endif -+ - else if (!argcmp(argv[i],"-vsdisable",4,1,&novbrowse)); /* disable sch? */ - - else if (!argcmp(argv[i],"-vsgeometry",4,0,&pm)) /* visSchnauzer geom */ -@@ -1440,8 +1691,9 @@ - - else if (!argcmp(argv[i],"-wait",3,0,&pm)) { /* secs betwn pics */ - if (++i<argc) { -- waitsec = abs(atoi(argv[i])); -- if (waitsec<0) waitsec = 0; -+ char *comma = strchr(argv[i], ','); -+ waitsec_nonfinal = fabs(atof(argv[i])); -+ waitsec_final = comma? fabs(atof(comma+1)) : waitsec_nonfinal; - } - } - -@@ -1467,7 +1719,11 @@ - /* check options for validity */ - - if (strlen(searchdir)) { /* got a search directory */ -+#ifdef AUTO_EXPAND -+ if (Chvdir(searchdir)) { -+#else - if (chdir(searchdir)) { -+#endif - fprintf(stderr,"xv: unable to cd to directory '%s'.\n",searchdir); - fprintf(stderr, - " Ignoring '-dir' option and/or 'xv.searchDirectory' resource\n"); -@@ -1514,7 +1770,7 @@ - preset = 0; - } - -- if (waitsec < 0) noFreeCols = 0; /* disallow nfc if not doing slideshow */ -+ if (waitsec < 0.0) noFreeCols = 0; /* disallow nfc if not doing slideshow */ - if (noFreeCols && perfect) { perfect = 0; owncmap = 1; } - - /* decide what default color allocation stuff we've settled on */ -@@ -1556,6 +1812,20 @@ - - static void cmdSyntax() - { -+ /* GRR 19980605: added version info for most common libraries */ -+ fprintf(stderr, "XV - %s.\n", REVDATE); -+#ifdef HAVE_JPEG -+ VersionInfoJPEG(); -+#endif -+#ifdef HAVE_TIFF -+ VersionInfoTIFF(); -+#endif -+#ifdef HAVE_PNG -+ VersionInfoPNG(); -+#endif -+ /* pbm/pgm/ppm support is native, not via pbmplus/netpbm libraries */ -+ fprintf(stderr, "\n"); -+ - fprintf(stderr, "Usage:\n"); - printoption(cmd); - printoption("[-]"); -@@ -1595,6 +1865,9 @@ - printoption("[-expand exp | hexp:vexp]"); - printoption("[-fg color]"); - printoption("[-/+fixed]"); -+#ifdef ENABLE_FIXPIX_SMOOTH -+ printoption("[-/+fixpix]"); -+#endif - printoption("[-flist fname]"); - printoption("[-gamma val]"); - printoption("[-geometry geom]"); -@@ -1607,6 +1880,7 @@ - printoption("[-hi color]"); - printoption("[-/+hist]"); - printoption("[-/+hsv]"); -+ printoption("[-ibg color]"); /* GRR 19980314 */ - printoption("[-icgeometry geom]"); - printoption("[-/+iconic]"); - printoption("[-igeometry geom]"); -@@ -1614,9 +1888,15 @@ - printoption("[-/+lbrowse]"); - printoption("[-lo color]"); - printoption("[-/+loadclear]"); -+#ifdef MACBINARY -+ printoption("[-/+macbinary]"); -+#endif - printoption("[-/+max]"); - printoption("[-/+maxpect]"); - printoption("[-mfn font]"); -+#ifdef HAVE_MGCSFX -+ printoption("[-/+mgcsfx]"); -+#endif - printoption("[-/+mono]"); - printoption("[-name str]"); - printoption("[-ncols #]"); -@@ -1624,13 +1904,25 @@ - printoption("[-/+nodecor]"); - printoption("[-/+nofreecols]"); - printoption("[-/+nolimits]"); -+#ifdef HAVE_MGCSFX -+ printoption("[-/+nomgcsfx]"); -+#endif -+#if defined(HAVE_PIC) || defined(HAVE_PIC2) -+ printoption("[-/+nopicadjust]"); -+#endif - printoption("[-/+nopos]"); - printoption("[-/+noqcheck]"); - printoption("[-/+noresetroot]"); - printoption("[-/+norm]"); - printoption("[-/+nostat]"); - printoption("[-/+owncmap]"); -+#ifdef HAVE_PCD -+ printoption("[-pcd size(0=192*128,1,2,3,4=3072*2048)]"); -+#endif - printoption("[-/+perfect]"); -+#ifdef HAVE_PIC2 -+ printoption("[-/+pic2split]"); -+#endif - printoption("[-/+pkludge]"); - printoption("[-/+poll]"); - printoption("[-preset #]"); -@@ -1649,17 +1941,22 @@ - printoption("[-/+rw]"); - printoption("[-slow24]"); - printoption("[-/+smooth]"); -+ printoption("[-/+startgrab]"); - printoption("[-/+stdcmap]"); - printoption("[-tgeometry geom]"); - printoption("[-/+vflip]"); - printoption("[-/+viewonly]"); - printoption("[-visual type]"); -+#ifdef VS_ADJUST -+ printoption("[-/+vsadjust]"); -+#endif - printoption("[-/+vsdisable]"); - printoption("[-vsgeometry geom]"); - printoption("[-/+vsmap]"); - printoption("[-/+vsperfect]"); -- printoption("[-wait seconds]"); -+ printoption("[-wait secs[,final_secs]]"); - printoption("[-white color]"); -+ printoption("[-windowid windowid]"); - printoption("[-/+wloop]"); - printoption("[filename ...]"); - fprintf(stderr,"\n\n"); -@@ -1682,6 +1979,7 @@ - fprintf(stderr,"\t7: centered on a 'brick' background\n"); - fprintf(stderr,"\t8: symmetrical tiling\n"); - fprintf(stderr,"\t9: symmetrical mirrored tiling\n"); -+ fprintf(stderr,"\t10: upper left corner\n"); - fprintf(stderr,"\n"); - Quit(1); - } -@@ -1694,7 +1992,7 @@ - int *plusminus; - { - /* does a string compare between a1 and a2. To return '0', a1 and a2 -- must match to the length of a2, and that length has to -+ must match to the length of a1, and that length has to - be at least 'minlen'. Otherwise, return non-zero. plusminus set to '1' - if '-option', '0' if '+option' */ - -@@ -1734,6 +2032,10 @@ - char *tmp; - char *fullname, /* full name of the original file */ - filename[512]; /* full name of file to load (could be /tmp/xxx)*/ -+#ifdef MACBINARY -+ char origname[512]; /* file name of original file (NO processing) */ -+ origname[0] = '\0'; -+#endif - - xvbzero((char *) &pinfo, sizeof(PICINFO)); - -@@ -1866,8 +2168,22 @@ - frompipe = 1; - } - } -+#ifdef AUTO_EXPAND -+ else { -+ fullname = (char *) malloc(MAXPATHLEN+2); -+ strcpy(fullname, namelist[filenum]); -+ freename = 1; -+ } -+ tmp = (char *) rindex(fullname, '/'); -+ if (tmp) { -+ *tmp = '\0'; -+ Mkvdir(fullname); -+ *tmp = '/'; -+ } -+ Dirtovd(fullname); -+#else - else fullname = namelist[filenum]; -- -+#endif - - strcpy(fullfname, fullname); - tmp = BaseName(fullname); -@@ -1875,18 +2191,20 @@ - - - /* chop off trailing ".Z", ".z", or ".gz" from displayed basefname, if any */ -- if (strlen(basefname) > (size_t) 2 && -- strcmp(basefname+strlen(basefname)-2,".Z")==0) -+ if (strlen(basefname)>2 && strcmp(basefname+strlen(basefname)-2,".Z")==0) - basefname[strlen(basefname)-2]='\0'; - else { - #ifdef GUNZIP -- if (strlen(basefname)>2 && strcmp(basefname+strlen(basefname)-2,".Z")==0) -+ if (strlen(basefname)>2 && strcmp(basefname+strlen(basefname)-2,".z")==0) - basefname[strlen(basefname)-2]='\0'; -- -- else if (strlen(basefname)>3 && -- strcmp(basefname+strlen(basefname)-3,".gz")==0) -+ else -+ if (strlen(basefname)>3 && strcmp(basefname+strlen(basefname)-3,".gz")==0) - basefname[strlen(basefname)-3]='\0'; --#endif /* GUNZIP */ -+#endif -+#ifdef BUNZIP2 -+ if (strlen(basefname)>4 && strcmp(basefname+strlen(basefname)-4,".bz2")==0) -+ basefname[strlen(basefname)-4]='\0'; -+#endif - } - - -@@ -1973,6 +2291,9 @@ - - if (strcmp(filename,STDINSTR)==0) { - FILE *fp = NULL; -+#ifndef USE_MKSTEMP -+ int tmpfd; -+#endif - - #ifndef VMS - sprintf(filename,"%s/xvXXXXXX",tmpdir); -@@ -1984,13 +2305,18 @@ - fp = fdopen(mkstemp(filename), "w"); - #else - mktemp(filename); -- fp = fopen(filename, "w"); -+ tmpfd = open(filename,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); -+ if (tmpfd < 0) FatalError("openPic(): can't create temporary file"); -+ fp = fdopen(tmpfd,"w"); - #endif - if (!fp) FatalError("openPic(): can't write temporary file"); - - clearerr(stdin); - while ( (i=getchar()) != EOF) putc(i,fp); - fclose(fp); -+#ifndef USE_MKSTEMP -+ close(tmpfd); -+#endif - - /* and remove it from list, since we can never reload from stdin */ - if (strcmp(namelist[0], STDINSTR)==0) deleteFromList(0); -@@ -2005,15 +2331,21 @@ - (no pipes or stdin, though it could be compressed) to be loaded */ - filetype = ReadFileType(filename); - -+#ifdef HAVE_MGCSFX -+ if (mgcsfx && filetype == RFT_UNKNOWN){ /* force use MgcSfx */ -+ if(getInputCom() != 0) filetype = RFT_MGCSFX; -+ } -+#endif - -- if (filetype == RFT_COMPRESS) { /* a compressed file. uncompress it */ -+ /* if it's a compressed file, uncompress it: */ -+ if ((filetype == RFT_COMPRESS) || (filetype == RFT_BZIP2)) { - char tmpname[128]; - - if ( - #ifndef VMS -- UncompressFile(filename, tmpname) -+ UncompressFile(filename, tmpname, filetype) - #else -- UncompressFile(basefname, tmpname) -+ UncompressFile(basefname, tmpname, filetype) - #endif - ) { - -@@ -2029,6 +2361,57 @@ - WaitCursor(); - } - -+#ifdef MACBINARY -+ if (handlemacb && macb_file == True) { -+ char tmpname[128]; -+ -+ if (RemoveMacbinary(filename, tmpname)) { -+ if (strcmp(fullname,filename)!=0) unlink(filename); -+ strcpy(origname, filename); -+ strcpy(filename, tmpname); -+ } -+ else filetype = RFT_ERROR; -+ -+ WaitCursor(); -+ } -+#endif -+ -+#ifdef HAVE_MGCSFX_AUTO -+ if (filetype == RFT_MGCSFX) { -+ char tmpname[128], tmp[256]; -+ char *icom; -+ -+ if ((icom = mgcsfx_auto_input_com(filename)) != NULL) { -+ sprintf(tmpname, "%s/xvmsautoXXXXXX", tmpdir); -+#ifdef USE_MKSTEMP -+ close(mkstemp(tmpname)); -+#else -+ mktemp(tmpname); -+#endif -+ SetISTR(ISTR_INFO, "Converting to known format by MgcSfx auto..."); -+ sprintf(tmp,"%s >%s", icom, tmpname); -+ } -+ else goto ms_auto_no; -+ -+#ifndef VMS -+ if (system(tmp)) -+#else -+ if (!system(tmp)) -+#endif -+ { -+ SetISTR(ISTR_INFO, "Unable to convert '%s' by MgcSfx auto.", -+ BaseName(filename)); -+ Warning(); -+ filetype = RFT_ERROR; -+ goto ms_auto_no; -+ } -+ -+ filetype = ReadFileType(tmpname); -+ if (strcmp(fullname,filename)!=0) unlink(filename); -+ strcpy(filename, tmpname); -+ } -+ms_auto_no: -+#endif /* HAVE_MGCSFX_AUTO */ - - if (filetype == RFT_ERROR) { - char foostr[512]; -@@ -2042,10 +2425,16 @@ - - if (filetype == RFT_UNKNOWN) { - /* view as a text/hex file */ -- TextView(filename); -+#ifdef MACBINARY -+ if (origname[0]) -+ i = TextView(origname); -+ else -+#endif -+ i = TextView(filename); - SetISTR(ISTR_INFO,"'%s' not in a recognized format.", basefname); - /* Warning(); */ -- goto SHOWN_AS_TEXT; -+ if (i) goto SHOWN_AS_TEXT; -+ else goto FAILED; - } - - if (filetype < RFT_ERROR) { -@@ -2073,8 +2462,9 @@ - if (filetype == RFT_XBM && (!i || pinfo.w==0 || pinfo.h==0)) { - /* probably just a '.h' file or something... */ - SetISTR(ISTR_INFO," "); -- TextView(filename); -- goto SHOWN_AS_TEXT; -+ i = TextView(filename); -+ if (i) goto SHOWN_AS_TEXT; -+ else goto FAILED; - } - - if (!i) { -@@ -2209,12 +2599,15 @@ - if (fullname && strcmp(fullname,filename)!=0) unlink(filename); - - -- SetISTR(ISTR_INFO,formatStr); -+ SetISTR(ISTR_INFO, "%s", formatStr); - - SetInfoMode(INF_PART); -- SetISTR(ISTR_FILENAME, "%s", -- (filenum==DFLTPIC || filenum==GRABBED || frompipe) ? -- "<none>" : basefname); -+ if (filenum==DFLTPIC || filenum==GRABBED || frompipe) -+ SetISTR(ISTR_FILENAME, "<none>"); -+ else if (numPages > 1) -+ SetISTR(ISTR_FILENAME, "%s Page %d of %d", basefname, curPage+1, numPages); -+ else -+ SetISTR(ISTR_FILENAME, "%s", basefname); - - SetISTR(ISTR_RES,"%d x %d",pWIDE,pHIGH); - SetISTR(ISTR_COLOR, ""); -@@ -2424,7 +2817,7 @@ - if (autodither && ncols>0) epicMode = EM_DITH; - - /* if in CM_STDCMAP mode, and *not* in '-wait 0', then autodither */ -- if (colorMapMode == CM_STDCMAP && waitsec != 0) epicMode = EM_DITH; -+ if (colorMapMode == CM_STDCMAP && waitsec != 0.0) epicMode = EM_DITH; - - /* if -smooth or image has been shrunk to fit screen */ - if (autosmooth || (pWIDE >maxWIDE || pHIGH>maxHIGH) -@@ -2510,7 +2903,11 @@ - to generate the correct exposes (particularly with 'BitGravity' turned - on */ - -- if (mainW && !useroot) GenExpose(mainW, 0, 0, (u_int) eWIDE, (u_int) eHIGH); -+ /*Brian T. Schellenberger: fix for X 4.2 refresh problem*/ -+ if (mainW && !useroot) { -+ XSync(theDisp, False); -+ GenExpose(mainW, 0, 0, (u_int) eWIDE, (u_int) eHIGH); -+ } - - return 1; - -@@ -2542,6 +2939,9 @@ - } - - -+extern byte ZXheader[128]; /* [JCE] Spectrum screen magic number is -+ defined in xvzx.c */ -+ - - /********************************/ - int ReadFileType(fname) -@@ -2554,76 +2954,105 @@ - - FILE *fp; - byte magicno[30]; /* first 30 bytes of file */ -- int rv, n; -+ int rv=RFT_UNKNOWN, n; -+#ifdef MACBINARY -+ int macbin_alrchk = False; -+#endif - - if (!fname) return RFT_ERROR; /* shouldn't happen */ - - fp = xv_fopen(fname, "r"); - if (!fp) return RFT_ERROR; - -+ if (strlen(fname) > 4 && -+ strcasecmp(fname+strlen(fname)-5, ".wbmp")==0) rv = RFT_WBMP; -+ - n = fread(magicno, (size_t) 1, (size_t) 30, fp); - fclose(fp); - -- if (n<30) return RFT_UNKNOWN; /* files less than 30 bytes long... */ -+ if (n<30) return rv; /* files less than 30 bytes long... */ - -- rv = RFT_UNKNOWN; -+#ifdef MACBINARY -+ macb_file = False; -+ while (1) { -+#endif - -- if (strncmp((char *) magicno,"GIF87a", (size_t) 6)==0 || -- strncmp((char *) magicno,"GIF89a", (size_t) 6)==0) rv = RFT_GIF; -+#ifdef HAVE_MGCSFX -+ if (is_mgcsfx(fname, magicno, 30) != 0) rv = RFT_MGCSFX; -+ else -+#endif -+ if (strncmp((char *) magicno,"GIF87a", (size_t) 6)==0 || -+ strncmp((char *) magicno,"GIF89a", (size_t) 6)==0) rv = RFT_GIF; - - else if (strncmp((char *) magicno,"VIEW", (size_t) 4)==0 || -- strncmp((char *) magicno,"WEIV", (size_t) 4)==0) rv = RFT_PM; -+ strncmp((char *) magicno,"WEIV", (size_t) 4)==0) rv = RFT_PM; -+ -+#ifdef HAVE_PIC2 -+ else if (magicno[0]=='P' && magicno[1]=='2' && -+ magicno[2]=='D' && magicno[3]=='T') rv = RFT_PIC2; -+#endif - - else if (magicno[0] == 'P' && magicno[1]>='1' && -- magicno[1]<='6') rv = RFT_PBM; -+ (magicno[1]<='6' || magicno[1]=='8')) rv = RFT_PBM; - - /* note: have to check XPM before XBM, as first 2 chars are the same */ - else if (strncmp((char *) magicno, "/* XPM */", (size_t) 9)==0) rv = RFT_XPM; - - else if (strncmp((char *) magicno,"#define", (size_t) 7)==0 || -- (magicno[0] == '/' && magicno[1] == '*')) rv = RFT_XBM; -+ (magicno[0] == '/' && magicno[1] == '*')) rv = RFT_XBM; - - else if (magicno[0]==0x59 && (magicno[1]&0x7f)==0x26 && -- magicno[2]==0x6a && (magicno[3]&0x7f)==0x15) rv = RFT_SUNRAS; -+ magicno[2]==0x6a && (magicno[3]&0x7f)==0x15) rv = RFT_SUNRAS; - -- else if (magicno[0] == 'B' && magicno[1] == 'M') rv = RFT_BMP; -+ else if (magicno[0] == 'B' && magicno[1] == 'M') rv = RFT_BMP; - -- else if (magicno[0]==0x52 && magicno[1]==0xcc) rv = RFT_UTAHRLE; -+ else if (magicno[0]==0x52 && magicno[1]==0xcc) rv = RFT_UTAHRLE; - - else if ((magicno[0]==0x01 && magicno[1]==0xda) || -- (magicno[0]==0xda && magicno[1]==0x01)) rv = RFT_IRIS; -+ (magicno[0]==0xda && magicno[1]==0x01)) rv = RFT_IRIS; - -- else if (magicno[0]==0x1f && magicno[1]==0x9d) rv = RFT_COMPRESS; -+ else if (magicno[0]==0x1f && magicno[1]==0x9d) rv = RFT_COMPRESS; - - #ifdef GUNZIP -- else if (magicno[0]==0x1f && magicno[1]==0x8b) rv = RFT_COMPRESS; -+ else if (magicno[0]==0x1f && magicno[1]==0x8b) rv = RFT_COMPRESS; - #endif - -- else if (magicno[0]==0x0a && magicno[1] <= 5) rv = RFT_PCX; -+#ifdef BUNZIP2 -+ else if (magicno[0]==0x42 && magicno[1]==0x5a) rv = RFT_BZIP2; -+#endif -+ -+ else if (magicno[0]==0x0a && magicno[1] <= 5) rv = RFT_PCX; - - else if (strncmp((char *) magicno, "FORM", (size_t) 4)==0 && -- strncmp((char *) magicno+8, "ILBM", (size_t) 4)==0) rv = RFT_IFF; -+ strncmp((char *) magicno+8, "ILBM", (size_t) 4)==0) rv = RFT_IFF; - - else if (magicno[0]==0 && magicno[1]==0 && - magicno[2]==2 && magicno[3]==0 && - magicno[4]==0 && magicno[5]==0 && -- magicno[6]==0 && magicno[7]==0) rv = RFT_TARGA; -+ magicno[6]==0 && magicno[7]==0) rv = RFT_TARGA; - - else if (magicno[4]==0x00 && magicno[5]==0x00 && -- magicno[6]==0x00 && magicno[7]==0x07) rv = RFT_XWD; -+ magicno[6]==0x00 && magicno[7]==0x07) rv = RFT_XWD; - - else if (strncmp((char *) magicno,"SIMPLE ", (size_t) 8)==0 && -- magicno[29] == 'T') rv = RFT_FITS; -+ magicno[29] == 'T') rv = RFT_FITS; - -+ /* [JCE] Spectrum screen */ -+ else if (memcmp(magicno, ZXheader, (size_t) 18)==0) rv = RFT_ZX; - - #ifdef HAVE_JPEG - else if (magicno[0]==0xff && magicno[1]==0xd8 && -- magicno[2]==0xff) rv = RFT_JFIF; -+ magicno[2]==0xff) rv = RFT_JFIF; - #endif - - #ifdef HAVE_TIFF - else if ((magicno[0]=='M' && magicno[1]=='M') || -- (magicno[0]=='I' && magicno[1]=='I')) rv = RFT_TIFF; -+ (magicno[0]=='I' && magicno[1]=='I')) rv = RFT_TIFF; -+#endif -+ -+#ifdef HAVE_PNG -+ else if (magicno[0]==0x89 && magicno[1]=='P' && -+ magicno[2]=='N' && magicno[3]=='G') rv = RFT_PNG; - #endif - - #ifdef HAVE_PDS -@@ -2635,11 +3064,59 @@ - rv = RFT_PDSVICAR; - #endif - --#ifdef GS_PATH -+#ifdef GS_PATH /* Ghostscript handles both PostScript and PDF */ - else if (strncmp((char *) magicno, "%!", (size_t) 2)==0 || -- strncmp((char *) magicno, "\004%!", (size_t) 3)==0) rv = RFT_PS; -+ strncmp((char *) magicno, "\004%!", (size_t) 3)==0 || -+ strncmp((char *) magicno, "%PDF", (size_t) 4)==0) rv = RFT_PS; - #endif - -+#ifdef HAVE_MAG -+ else if (strncmp((char *) magicno,"MAKI02 ", (size_t) 8)==0) rv = RFT_MAG; -+#endif -+ -+#ifdef HAVE_MAKI -+ else if (strncmp((char *) magicno,"MAKI01A ", (size_t) 8)==0 || -+ strncmp((char *) magicno,"MAKI01B ", (size_t) 8)==0) rv = RFT_MAKI; -+#endif -+ -+#ifdef HAVE_PIC -+ else if (magicno[0]=='P' && magicno[1]=='I'&&magicno[2]=='C') rv = RFT_PIC; -+#endif -+ -+#ifdef HAVE_PI -+ else if (magicno[0]=='P' && magicno[1]=='i') rv = RFT_PI; -+#endif -+ -+#ifdef HAVE_HIPS -+ else if (strstr((char *) magicno, "./digest")) rv = RFT_HIPS; -+#endif -+ -+#ifdef HAVE_PCD -+ else if (magicno[0]==0xff && magicno[1]==0xff && -+ magicno[2]==0xff && magicno[3]==0xff) rv = RFT_PCD; -+#endif -+ -+#ifdef MACBINARY -+ /* Now we try to handle MacBinary files, but the method is VERY dirty... */ -+ if (macbin_alrchk == True) { -+ macb_file = True; -+ break; -+ } -+ -+ if (rv != RFT_UNKNOWN) -+ break; -+ -+ /* Skip MACBSIZE and recheck */ -+ macbin_alrchk = True; -+ fp = xv_fopen(fname, "r"); -+ if (!fp) return RFT_ERROR; -+ fseek(fp, MACBSIZE, SEEK_SET); -+ n = fread(magicno, (size_t) 1, (size_t) 30, fp); -+ fclose(fp); -+ -+ if (n<30) return RFT_UNKNOWN; /* files less than 30 bytes long... */ -+ } -+#endif - return rv; - } - -@@ -2652,9 +3129,10 @@ - PICINFO *pinfo; - { - /* if quick is set, we're being called to generate icons, or something -- like that. We should load the image as quickly as possible. Currently, -- this only affects the LoadPS routine, which, if quick is set, only -- generates the page file for the first page of the document */ -+ like that. We should load the image as quickly as possible. Previously, -+ this affected only the LoadPS routine, which, if quick is set, only -+ generates the page file for the first page of the document. Now it -+ also affects PCD, which loads only a thumbnail. */ - - int rv = 0; - -@@ -2665,7 +3143,11 @@ - switch (ftype) { - case RFT_GIF: rv = LoadGIF (fname, pinfo); break; - case RFT_PM: rv = LoadPM (fname, pinfo); break; -+#ifdef HAVE_MGCSFX -+ case RFT_PBM: rv = LoadPBM (fname, pinfo, -1); break; -+#else - case RFT_PBM: rv = LoadPBM (fname, pinfo); break; -+#endif - case RFT_XBM: rv = LoadXBM (fname, pinfo); break; - case RFT_SUNRAS: rv = LoadSunRas(fname, pinfo); break; - case RFT_BMP: rv = LoadBMP (fname, pinfo); break; -@@ -2677,21 +3159,60 @@ - case RFT_XPM: rv = LoadXPM (fname, pinfo); break; - case RFT_XWD: rv = LoadXWD (fname, pinfo); break; - case RFT_FITS: rv = LoadFITS (fname, pinfo, quick); break; -+ case RFT_ZX: rv = LoadZX (fname, pinfo); break; /* [JCE] */ -+ case RFT_WBMP: rv = LoadWBMP (fname, pinfo); break; -+ -+#ifdef HAVE_PCD -+ /* if quick is switched on, use the smallest image size; don't ask the user */ -+ case RFT_PCD: rv = LoadPCD (fname, pinfo, quick ? 0 : PcdSize); break; -+#endif - - #ifdef HAVE_JPEG -- case RFT_JFIF: rv = LoadJFIF (fname, pinfo, quick); break; -+ case RFT_JFIF: rv = LoadJFIF (fname, pinfo, quick); break; - #endif - - #ifdef HAVE_TIFF -- case RFT_TIFF: rv = LoadTIFF (fname, pinfo, quick); break; -+ case RFT_TIFF: rv = LoadTIFF (fname, pinfo, quick); break; -+#endif -+ -+#ifdef HAVE_PNG -+ case RFT_PNG: rv = LoadPNG (fname, pinfo); break; - #endif - - #ifdef HAVE_PDS -- case RFT_PDSVICAR: rv = LoadPDS (fname, pinfo); break; -+ case RFT_PDSVICAR: rv = LoadPDS (fname, pinfo); break; - #endif - - #ifdef GS_PATH -- case RFT_PS: rv = LoadPS (fname, pinfo, quick); break; -+ case RFT_PS: rv = LoadPS (fname, pinfo, quick); break; -+#endif -+ -+#ifdef HAVE_MAG -+ case RFT_MAG: rv = LoadMAG (fname, pinfo); break; -+#endif -+ -+#ifdef HAVE_MAKI -+ case RFT_MAKI: rv = LoadMAKI (fname, pinfo); break; -+#endif -+ -+#ifdef HAVE_PIC -+ case RFT_PIC: rv = LoadPIC (fname, pinfo); break; -+#endif -+ -+#ifdef HAVE_PI -+ case RFT_PI: rv = LoadPi (fname, pinfo); break; -+#endif -+ -+#ifdef HAVE_PIC2 -+ case RFT_PIC2: rv = LoadPIC2 (fname, pinfo, quick); break; -+#endif -+ -+#ifdef HAVE_HIPS -+ case RFT_HIPS: rv = LoadHIPS (fname, pinfo); break; -+#endif -+ -+#ifdef HAVE_MGCSFX -+ case RFT_MGCSFX: rv = LoadMGCSFX (fname, pinfo); break; - #endif - - } -@@ -2700,13 +3221,17 @@ - - - /********************************/ --int UncompressFile(name, uncompname) -+int UncompressFile(name, uncompname, filetype) - char *name, *uncompname; -+ int filetype; - { - /* returns '1' on success, with name of uncompressed file in uncompname - returns '0' on failure */ - - char namez[128], *fname, buf[512]; -+#ifndef USE_MKSTEMP -+ int tmpfd; -+#endif - - fname = name; - namez[0] = '\0'; -@@ -2746,15 +3271,23 @@ - close(mkstemp(uncompname)); - #else - mktemp(uncompname); -+ tmpfd = open(uncompname,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); -+ if (tmpfd < 0) FatalError("UncompressFile(): can't create temporary file"); -+ close(tmpfd); - #endif - - #ifndef VMS -- sprintf(buf,"%s -c %s >%s", UNCOMPRESS, fname, uncompname); -+ if (filetype == RFT_COMPRESS) -+ sprintf(buf,"%s -c '%s' > '%s'", UNCOMPRESS, fname, uncompname); -+# ifdef BUNZIP2 -+ else if (filetype == RFT_BZIP2) -+ sprintf(buf,"%s -c '%s' > '%s'", BUNZIP2, fname, uncompname); -+# endif - #else /* it IS VMS */ - # ifdef GUNZIP -- sprintf(buf,"%s %s %s", UNCOMPRESS, fname, uncompname); -+ sprintf(buf,"%s '%s' '%s'", UNCOMPRESS, fname, uncompname); - # else -- sprintf(buf,"%s %s", UNCOMPRESS, fname); -+ sprintf(buf,"%s '%s'", UNCOMPRESS, fname); - # endif - #endif - -@@ -2797,6 +3330,62 @@ - } - - -+#ifdef MACBINARY -+/********************************/ -+int RemoveMacbinary(src, dst) -+ char *src, *dst; -+{ -+ char buffer[8192]; /* XXX */ -+ int n, eof; -+#ifndef USE_MKSTEMP -+ int tmpfd; -+#endif -+ FILE *sfp, *dfp; -+ -+ sprintf(dst, "%s/xvmXXXXXX", tmpdir); -+#ifdef USE_MKSTEMP -+ close(mkstemp(dst)); -+#else -+ mktemp(dst); -+ tmpfd = open(dst,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); -+ if (tmpfd < 0) FatalError("RemoveMacbinary(): can't create temporary file"); -+#endif -+ -+ SetISTR(ISTR_INFO, "Removing MacBinary..."); -+ -+ sfp = xv_fopen(src, "r"); -+#ifdef USE_MKSTEMP -+ dfp = xv_fopen(dst, "w"); -+#else -+ dfp = fdopen(tmpfd, "w"); -+#endif -+ if (!sfp || !dfp) { -+ SetISTR(ISTR_INFO, "Unable to remove a InfoFile header form '%s'.", src); -+ Warning(); -+ return 0; -+ } -+ fseek(sfp, MACBSIZE, SEEK_SET); -+ while ((n = fread(buffer, 1, sizeof(buffer), sfp)) == 8192) /* XXX */ -+ fwrite(buffer, 1, n, dfp); -+ if ((eof = feof(sfp))) -+ fwrite(buffer, 1, n, dfp); -+ fclose(sfp); -+ fflush(dfp); -+ fclose(dfp); -+#ifndef USE_MKSTEMP -+ close(tmpfd); -+#endif -+ if (!eof) { -+ SetISTR(ISTR_INFO, "Unable to remove a InfoFile header form '%s'.", src); -+ Warning(); -+ return 0; -+ } -+ -+ return 1; -+} -+#endif -+ -+ - /********************************/ - void KillPageFiles(bname, numpages) - char *bname; -@@ -2918,6 +3507,9 @@ - - char fullcmd[512], tmpname[64], str[512]; - int i; -+#ifndef USE_MKSTEMP -+ int tmpfd; -+#endif - - if (!cmd || (strlen(cmd) < (size_t) 2)) return 1; - -@@ -2926,6 +3518,9 @@ - close(mkstemp(tmpname)); - #else - mktemp(tmpname); -+ tmpfd = open(tmpname,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); -+ if (tmpfd < 0) FatalError("openPic(): can't create temporary file"); -+ close(tmpfd); - #endif - if (tmpname[0] == '\0') { /* mktemp() or mkstemp() blew up */ - sprintf(str,"Unable to create temporary filename."); -@@ -2966,26 +3561,21 @@ - { - int i; - -+ waitsec = (numnames <= 1)? waitsec_final : waitsec_nonfinal; -+ - if (!numnames) { openPic(DFLTPIC); return; } - - i = 0; -- if (!randomShow) { -- while (numnames>0) { -- if (openPic(0)) return; /* success */ -- else { -- if (polling && !i) -- fprintf(stderr,"%s: POLLING: Waiting for file '%s' \n\tto %s\n", -- cmd, namelist[0], "be created, or whatever..."); -- i = 1; -- } -+ while (numnames>0) { -+ if (openPic(0)) return; /* success */ -+ else { -+ if (polling && !i) -+ fprintf(stderr,"%s: POLLING: Waiting for file '%s' \n\tto %s\n", -+ cmd, namelist[0], "be created, or whatever..."); -+ i = 1; - } - } - -- else { /* pick random first picture */ -- for (i=findRandomPic(); i>=0; i=findRandomPic()) -- if (openPic(i)) return; /* success */ -- } -- - if (numnames>1) FatalError("couldn't open any pictures"); - else Quit(-1); - } -@@ -3014,19 +3604,15 @@ - { - int i; - -- if (!randomShow) { -- if (curname>=0) i = curname+1; -- else if (nList.selected >= 0 && nList.selected < numnames) -- i = nList.selected; -- else i = 0; -+ if (curname>=0) i = curname+1; -+ else if (nList.selected >= 0 && nList.selected < numnames) -+ i = nList.selected; -+ else i = 0; - -- while (i<numnames && !openPic(i)); -- if (i<numnames) return; /* success */ -- } -- else { -- for (i=findRandomPic(); i>=0; i=findRandomPic()) -- if (openPic(i)) return; -- } -+ waitsec = (i == numnames-1)? waitsec_final : waitsec_nonfinal; -+ -+ while (i<numnames && !openPic(i)); -+ if (i<numnames) return; /* success */ - - Quit(0); - } -@@ -3039,25 +3625,21 @@ - - j = loop = 0; - while (1) { -- if (!randomShow) { - -- if (curname>=0) i = curname+1; -- else if (nList.selected >= 0 && nList.selected < numnames) -- i = nList.selected; -- else i = 0; -+ if (curname>=0) i = curname+1; -+ else if (nList.selected >= 0 && nList.selected < numnames) -+ i = nList.selected; -+ else i = 0; - -- if (loop) { i = 0; loop = 0; } -+ if (loop) { i = 0; loop = 0; } - -- while (i<numnames && !openPic(i)); -- if (i<numnames) return; -- } -- else { -- for (i=findRandomPic(); i>=0; i=findRandomPic()) -- if (openPic(i)) return; -- } -+ waitsec = (i == numnames-1)? waitsec_final : waitsec_nonfinal; -+ -+ while (i<numnames && !openPic(i)); -+ if (i<numnames) return; - - loop = 1; /* back to top of list */ -- if (j) break; /* we're in a 'failure loop' */ -+ if (j) break; /* we're in a 'failure loop' */ - j++; - } - -@@ -3090,47 +3672,6 @@ - openPic(LOADPIC); - } - -- -- -- --/****************/ --static int findRandomPic() --/****************/ --{ -- static byte *loadList; -- static int left_to_load, listLen = -1; -- int k; -- time_t t; -- -- /* picks a random name out of the list, and returns it's index. If there -- are no more names to pick, it returns '-1' and resets itself */ -- -- if (!loadList || numnames!=listLen) { -- if (loadList) free(loadList); -- else { -- time(&t); -- srandom((unsigned int) t); /* seed the random */ -- } -- -- left_to_load = listLen = numnames; -- loadList = (byte *) malloc((size_t) listLen); -- for (k=0; k<listLen; k++) loadList[k] = 0; -- } -- -- if (left_to_load <= 0) { /* we've loaded all the pics */ -- for (k=0; k<listLen; k++) loadList[k] = 0; /* clear flags */ -- left_to_load = listLen; -- return -1; /* 'done' return */ -- } -- -- for (k=abs(random()) % listLen; loadList[k]; k = (k+1) % listLen); -- -- left_to_load--; -- loadList[k] = TRUE; -- -- return k; --} -- - /****************/ - static void mainLoop() - { -@@ -3144,10 +3685,11 @@ - selected file (or the 0th file, if no selection either), and 'Prev' means - view the one right before the selected file */ - -- openFirstPic(); /* find first displayable picture, exit if none */ -+ /* find first displayable picture, exit if none */ -+ if (!startGrab) openFirstPic(); - - if (!pic) { /* must've opened a text file... display dflt pic */ -- openPic(DFLTPIC); -+ if (!startGrab) openPic(DFLTPIC); - if (mainW && !useroot) RaiseTextWindows(); - } - -@@ -3224,8 +3766,16 @@ - hints.flags = 0; - if ((i&XValue || i&YValue)) hints.flags = USPosition; - -- if (i&XValue && i&XNegative) x = vrWIDE - eWIDE - abs(x); -- if (i&YValue && i&YNegative) y = vrHIGH - eHIGH - abs(y); -+ hints.win_gravity = NorthWestGravity; -+ if (i&XValue && i&XNegative) { -+ hints.win_gravity = NorthEastGravity; -+ x = vrWIDE - (eWIDE + 2 * bwidth) - abs(x); -+ } -+ if (i&YValue && i&YNegative) { -+ hints.win_gravity = (hints.win_gravity == NorthWestGravity) ? -+ SouthWestGravity : SouthEastGravity; -+ y = vrHIGH - (eHIGH + 2 * bwidth) - abs(y); -+ } - - if (x+eWIDE > vrWIDE) x = vrWIDE - eWIDE; /* keep on screen */ - if (y+eHIGH > vrHIGH) y = vrHIGH - eHIGH; -@@ -3245,7 +3795,7 @@ - hints.x = x; hints.y = y; - hints.width = eWIDE; hints.height = eHIGH; - hints.max_width = maxWIDE; hints.max_height = maxHIGH; -- hints.flags |= USSize | PMaxSize; -+ hints.flags |= USSize | PMaxSize | PWinGravity; - - xswa.bit_gravity = StaticGravity; - xswa.background_pixel = bg; -@@ -3294,10 +3844,6 @@ - } - } - -- -- XSetStandardProperties(theDisp,mainW,"","",None,NULL,0,&hints); -- setWinIconNames(name); -- - xwmh.input = True; - xwmh.flags = InputHint; - -@@ -3322,12 +3868,13 @@ - } - } - } -- XSetWMHints(theDisp, mainW, &xwmh); - - classh.res_name = "xv"; - classh.res_class = "XVroot"; -- XSetClassHint(theDisp, mainW, &classh); - -+ XmbSetWMProperties(theDisp, mainW, NULL, NULL, NULL, 0, &hints, &xwmh, -+ &classh); -+ setWinIconNames(name); - - if (nodecor) { /* turn of image window decorations (in MWM) */ - Atom mwm_wm_hints; -@@ -4070,16 +4617,30 @@ - unsigned long nitems, nleft; - byte *data; - -- i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), -- resAtom, 0L, 1L, False, -- XA_STRING, &actType, &actFormat, &nitems, &nleft, -- (unsigned char **) &data); -+ if (spec_window) { -+ i = XGetWindowProperty(theDisp, spec_window, -+ resAtom, 0L, 1L, False, -+ XA_STRING, &actType, &actFormat, &nitems, &nleft, -+ (unsigned char **) &data); -+ } else { -+ i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), -+ resAtom, 0L, 1L, False, -+ XA_STRING, &actType, &actFormat, &nitems, &nleft, -+ (unsigned char **) &data); -+ } - if (i==Success && actType==XA_STRING && actFormat==8) { - if (nitems>0 && data) XFree(data); -- i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), resAtom, 0L, -- (long) ((nleft+4+3)/4), -- False, XA_STRING, &actType, &actFormat, -- &nitems, &nleft, (unsigned char **) &data); -+ if (spec_window) { -+ i = XGetWindowProperty(theDisp, spec_window, resAtom, 0L, -+ (long) ((nleft+4+3)/4), -+ False, XA_STRING, &actType, &actFormat, -+ &nitems, &nleft, (unsigned char **) &data); -+ } else { -+ i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), resAtom, 0L, -+ (long) ((nleft+4+3)/4), -+ False, XA_STRING, &actType, &actFormat, -+ &nitems, &nleft, (unsigned char **) &data); -+ } - if (i==Success && actType==XA_STRING && actFormat==8 && data) { - def_resource = XrmGetStringDatabase((char *) data); - XFree(data); -diff -ruN xv-3.10a-bugfixes/xv.h xv-3.10a-enhancements/xv.h ---- xv-3.10a-bugfixes/xv.h 2005-04-10 09:37:18.000000000 -0700 -+++ xv-3.10a-enhancements/xv.h 2005-05-01 13:32:10.000000000 -0700 -@@ -14,8 +14,9 @@ - /* GRR orig jumbo enhancements patch: 20000220 */ - /* GRR 1st public jumbo F+E patches: 20040531 */ - /* GRR 2nd public jumbo F+E patches: 20050410 */ --#define REVDATE "version 3.10a-jumboFix of 20050410" --#define VERSTR "3.10a-20050410" -+/* GRR 3rd public jumbo F+E patches: 20050501 */ -+#define REVDATE "version 3.10a-jumboFix+Enh of 20050501" -+#define VERSTR "3.10a-20050501" - - /* - * uncomment the following, and modify for your site, but only if you've -@@ -49,6 +50,10 @@ - /* START OF MACHINE-DEPENDENT CONFIGURATION INFO */ - /*************************************************/ - -+ -+#define ENABLE_FIXPIX_SMOOTH /* GRR 19980607 */ -+ -+ - /* Things to make xv more likely to just build, without the user tweaking - the makefile */ - -@@ -67,6 +72,14 @@ - # define SVR4 - #endif - -+#if defined(__sony_news) && defined(bsd43) && !defined(__bsd43) -+# define __bsd43 -+#elif defined(__sony_news) && (defined(SYSTYPE_BSD) || defined(__SYSTYPE_BSD)) && !defined(bsd43) && !defined(__bsd43) -+# define bsd43 -+# define __bsd43 -+#endif -+ -+#include <signal.h> /* for interrupt handling */ - - /* at least on Linux, the following file (1) includes sys/types.h and - * (2) defines __USE_BSD (which was not defined before here), so __linux__ -@@ -78,7 +91,9 @@ - # ifndef _LINUX_LIMITS_H - # include <linux/limits.h> - # endif --# define USLEEP -+# ifndef USLEEP -+# define USLEEP -+# endif - /* want only one or the other defined, not both: */ - # if !defined(BSDTYPES) && !defined(__USE_BSD) - # define BSDTYPES -@@ -117,6 +132,16 @@ - #endif - - -+#if defined(__sony_news) && defined(__bsd43) -+# include <unistd.h> -+#endif -+ -+ -+#if defined(__FreeBSD__) -+# include <sys/param.h> -+#endif -+ -+ - /* include files */ - #include <stdio.h> - #include <math.h> -@@ -132,9 +157,11 @@ - - #ifndef VMS - # include <errno.h> -- extern int errno; /* SHOULD be in errno.h, but often isn't */ --# if !defined(__NetBSD__) && !(defined(__linux__) && defined(__USE_BSD)) -- extern char *sys_errlist[]; /* this too... */ -+# ifndef __NetBSD__ -+# if !(defined __GLIBC__ && __GLIBC__ >= 2) -+ extern int errno; /* SHOULD be in errno.h, but often isn't */ -+ extern char *sys_errlist[]; /* this too... */ -+# endif - # endif - #endif - -@@ -203,9 +230,10 @@ - #include <X11/Xatom.h> - #include <X11/Xmd.h> - -+#ifdef TV_L10N -+# include <X11/Xlocale.h> -+#endif - --#undef SIGCHLD /* defined in both Xos.h and signal.h */ --#include <signal.h> /* for interrupt handling */ - - #include <sys/types.h> - -@@ -316,7 +344,9 @@ - # endif - #endif - -- -+#ifndef S_IRWUSR -+# define S_IRWUSR (S_IRUSR|__S_IWRITE) -+#endif - - #ifndef MAXPATHLEN - # define MAXPATHLEN 256 -@@ -343,13 +373,36 @@ - #endif - - --/* GRR 20040430: This is new and still only partially implemented. No doubt -- * there are many other systems that have mkstemp() (SUSv3), -- * but let's start small... */ --#if defined(__linux__) || defined(__OpenBSD__) --# define USE_MKSTEMP /* use 'mkstemp()' instead of 'mktemp()' */ -+/* GRR 20040430: This is new and still not fully deployed. No doubt there -+ * are other systems that have mkstemp() (SUSv3); we can add -+ * them later. */ -+#ifndef VMS /* VMS hates multi-line definitions */ -+# if defined(__linux__) || defined(__OpenBSD__) || defined(__NetBSD__) || \ -+ defined(__bsdi__) -+# ifndef USE_MKSTEMP -+# define USE_MKSTEMP /* use 'mkstemp()' instead of 'mktemp()' */ -+# endif /* >> SECURITY ISSUE << */ -+# endif -+#endif -+ -+ -+/* GRR 20040503: This is new and so far tested only under Linux. But it -+ * allows -wait to work with subsecond values as long as -+ * times() exists and clock_t is a long int (latter matters -+ * only if/when clocks wrap, which for Linux is multiples of -+ * 497.11 days since the last reboot). */ -+#if defined(__linux__) -+# define USE_TICKS /* use times()/Timer(), not time()/sleep() */ -+# include <limits.h> /* LONG_MAX (really want CLOCK_T_MAX) */ -+# include <sys/times.h> /* times() */ -+# ifndef CLK_TCK /* can be undefined in strict-ANSI mode */ -+# define CLK_TCK CLOCKS_PER_SEC /* claimed to be same thing in time.h */ -+# endif - #endif - -+#if (defined(SYSV) || defined(SVR4) || defined(linux)) && !defined(USE_GETCWD) -+# define USE_GETCWD -+#endif - - /*****************************/ - /* END OF CONFIGURATION INFO */ -@@ -363,17 +416,21 @@ - # define HAVE_TIFF - #endif - -+#ifdef DOPNG -+# define HAVE_PNG -+#endif -+ - #ifdef DOPDS - # define HAVE_PDS - #endif - - - --#define PROGNAME "xv" /* used in resource database */ -+#define PROGNAME "xv" /* used in resource database */ - --#define MAXNAMES 4096 /* max # of files in ctrlW list */ -+#define MAXNAMES 32768 /* max # of files in ctrlW list */ - --#define MAXBRWIN 4 /* max # of vis browser windows */ -+#define MAXBRWIN 16 /* max # of vis browser windows */ - - /* strings in the INFOBOX (used in SetISTR and GetISTR) */ - #define NISTR 10 /* number of ISTRs */ -@@ -494,24 +551,80 @@ - #define F_TIFINC 0 - #endif - -+#ifdef HAVE_PNG -+#define F_PNGINC 1 -+#else -+#define F_PNGINC 0 -+#endif -+ -+#ifdef HAVE_MAG -+# define F_MAGINC 1 -+#else -+# define F_MAGINC 0 -+#endif -+ -+#ifdef HAVE_PIC -+# define F_PICINC 1 -+#else -+# define F_PICINC 0 -+#endif + -+#ifdef HAVE_MAKI -+# define F_MAKINC 1 -+#else -+# define F_MAKINC 0 -+#endif ++cd $BUILD ++rm -rf xv-3.10 ++tar xzvf $SOURCE/xv-3.10.tar.gz ++cd xv-3.10 ++zcat $SOURCE/xv-3.10a.patch.gz | patch -p0 $PFLAGS || \ ++ bail $SOURCE/xv-3.10a.patch.gz ++bzcat $SOURCE/xv-3.10a-jumbo-fix-patch-20050410.txt.bz2 | patch -p1 $PFLAGS || \ ++ bail $SOURCE/xv-3.10a-jumbo-fix-patch-20050410.txt.bz2 ++bzcat $SOURCE/xv-3.10a-jumbo-enh-patch-20050501.txt.bz2 | patch -p1 $PFLAGS || \ ++ bail $SOURCE/xv-3.10a-jumbo-enh-patch-20050501.txt.bz2 ++zcat $SOURCE/xv.prefix.diff.gz | patch -p1 $PFLAGS || \ ++ bail $SOURCE/xv.prefix.diff.gz ++make -f Makefile.std || bail make ++strip --strip-unneeded bggen vdcomp xcmap xv xvpictoppm || bail strip ++ ++exit $? ++ ++# vi:set ts=4: +diff -u -r --new-file xv-3.10a.orig/contrib/fedora/README xv-3.10a/contrib/fedora/README +--- xv-3.10a.orig/contrib/fedora/README 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/contrib/fedora/README 2006-06-01 10:12:47.000000000 -0500 +@@ -0,0 +1,16 @@ ++Greg, ++ After winding up in dark lonely places trying to ++get xv-3.10a to build on FC5 I suspected I was missing ++something. Then I happened on your patch manifest ++in Slackware 10.2. ++ ++I bandsawed the script a bit to use in propagating XV ++to a handful of personal FC5 machines. Attached for ++reference. + -+#ifdef HAVE_PI -+# define F_PAIINC 1 -+#else -+# define F_PAIINC 0 -+#endif ++Thanks for your effort! + -+#ifdef HAVE_PIC2 -+# define F_PC2INC 1 -+#else -+# define F_PC2INC 0 -+#endif -+ -+#ifdef HAVE_MGCSFX -+# define F_MGCSFXINC 1 -+#else -+# define F_MGCSFXINC 0 -+#endif -+ -+#ifdef MACBINARY -+# define MACBSIZE 128 -+#endif - - #define F_GIF 0 - #define F_JPEG ( 0 + F_JPGINC) - #define F_TIFF ( 0 + F_JPGINC + F_TIFINC) --#define F_PS ( 1 + F_JPGINC + F_TIFINC) --#define F_PBMRAW ( 2 + F_JPGINC + F_TIFINC) --#define F_PBMASCII ( 3 + F_JPGINC + F_TIFINC) --#define F_XBM ( 4 + F_JPGINC + F_TIFINC) --#define F_XPM ( 5 + F_JPGINC + F_TIFINC) --#define F_BMP ( 6 + F_JPGINC + F_TIFINC) --#define F_SUNRAS ( 7 + F_JPGINC + F_TIFINC) --#define F_IRIS ( 8 + F_JPGINC + F_TIFINC) --#define F_TARGA ( 9 + F_JPGINC + F_TIFINC) --#define F_FITS (10 + F_JPGINC + F_TIFINC) --#define F_PM (11 + F_JPGINC + F_TIFINC) --#define F_DELIM1 (12 + F_JPGINC + F_TIFINC) /* ----- */ --#define F_FILELIST (13 + F_JPGINC + F_TIFINC) --#define F_MAXFMTS (14 + F_JPGINC + F_TIFINC) /* 15, normally */ -+#define F_PNG ( 0 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_PS ( 1 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_PBMRAW ( 2 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_PBMASCII ( 3 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_XBM ( 4 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_XPM ( 5 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_BMP ( 6 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_SUNRAS ( 7 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_IRIS ( 8 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_TARGA ( 9 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_FITS (10 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_PM (11 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define F_ZX (12 + F_JPGINC + F_TIFINC + F_PNGINC) /* [JCE] */ -+#define F_WBMP (13 + F_JPGINC + F_TIFINC + F_PNGINC) -+#define JP_EXT_F (F_WBMP) -+#define F_MAG (JP_EXT_F + F_MAGINC) -+#define F_PIC (JP_EXT_F + F_MAGINC + F_PICINC) -+#define F_MAKI (JP_EXT_F + F_MAGINC + F_PICINC + F_MAKINC) -+#define F_PI (JP_EXT_F + F_MAGINC + F_PICINC + F_MAKINC + F_PAIINC) -+#define F_PIC2 (JP_EXT_F + F_MAGINC + F_PICINC + F_MAKINC + F_PAIINC + F_PC2INC) -+#define F_MGCSFX (JP_EXT_F + F_MAGINC + F_PICINC + F_MAKINC + F_PAIINC + F_PC2INC + F_MGCSFXINC) -+#define JP_EXT_F_END (F_MGCSFX) -+#define F_DELIM1 (JP_EXT_F_END + 1) /* ----- */ -+#define F_FILELIST (JP_EXT_F_END + 2) -+#define F_MAXFMTS (JP_EXT_F_END + 3) /* 23, normally */ - - - -@@ -541,6 +654,19 @@ - #define RFT_XPM 17 - #define RFT_XWD 18 - #define RFT_FITS 19 -+#define RFT_PNG 20 -+#define RFT_ZX 21 /* [JCE] */ -+#define RFT_WBMP 22 -+#define RFT_PCD 23 -+#define RFT_HIPS 24 -+#define RFT_BZIP2 25 -+#define JP_EXT_RFT (RFT_BZIP2) -+#define RFT_MAG (JP_EXT_RFT + 1) -+#define RFT_MAKI (JP_EXT_RFT + 2) -+#define RFT_PIC (JP_EXT_RFT + 3) -+#define RFT_PI (JP_EXT_RFT + 4) -+#define RFT_PIC2 (JP_EXT_RFT + 5) -+#define RFT_MGCSFX (JP_EXT_RFT + 6) - - /* definitions for page up/down, arrow up/down list control */ - #define LS_PAGEUP 0 -@@ -599,7 +725,8 @@ - #define RM_CBRICK 7 /* centered on a 'brick' bg */ - #define RM_ECENTER 8 /* symmetrical tiled */ - #define RM_ECMIRR 9 /* symmetrical mirror tiled */ --#define RM_MAX RM_ECMIRR -+#define RM_UPLEFT 10 /* just in upper left corner */ -+#define RM_MAX RM_UPLEFT - - - /* values of colorMapMode */ -@@ -649,7 +776,8 @@ - #define RMB_CBRICK 8 - #define RMB_ECENTER 9 - #define RMB_ECMIRR 10 --#define RMB_MAX 11 -+#define RMB_UPLEFT 11 -+#define RMB_MAX 12 - - - /* indicies into conv24MB */ -@@ -784,9 +912,9 @@ - int len; /* length of major axis */ - int vert; /* true if vertical, else horizontal */ - int active; /* true if scroll bar can do anything*/ -- int min,max; /* min/max values 'pos' can take */ -- int val; /* 'value' of scrollbar */ -- int page; /* amt val change on pageup/pagedown */ -+ double min,max; /* min/max values 'pos' can take */ -+ double val; /* 'value' of scrollbar */ -+ double page; /* amt val change on pageup/pagedown */ - int tpos; /* thumb pos. (pixels from tmin) */ - int tmin,tmax; /* min/max thumb offsets (from 0,0) */ - int tsize; /* size of thumb (in pixels) */ -@@ -801,9 +929,10 @@ - typedef struct { Window win; /* window ID */ - int x,y,w,h; /* window coords in parent */ - int active; /* true if can do anything*/ -- int min,max; /* min/max values 'pos' can take */ -- int val; /* 'value' of dial */ -- int page; /* amt val change on pageup/pagedown */ -+ double min,max; /* min/max values 'pos' can take */ -+ double val; /* 'value' of dial */ -+ double inc; /* amt val change on up/down */ -+ double page; /* amt val change on pageup/pagedown */ - char *title; /* title for this guage */ - char *units; /* string appended to value */ - u_long fg,bg,hi,lo; /* colors */ -@@ -971,15 +1100,19 @@ - WHERE unsigned int ncells, dispWIDE, dispHIGH, dispDEEP; - WHERE unsigned int vrWIDE, vrHIGH, maxWIDE, maxHIGH; - WHERE Colormap theCmap, LocalCmap; --WHERE Window rootW, mainW, vrootW; -+WHERE Window spec_window, rootW, mainW, vrootW; - WHERE GC theGC; - WHERE u_long black, white, fg, bg, infofg, infobg; - WHERE u_long hicol, locol; - WHERE u_long blkRGB, whtRGB; - WHERE Font mfont, monofont; - WHERE XFontStruct *mfinfo, *monofinfo; -+#ifdef TV_L10N -+WHERE XFontSet monofset; -+WHERE XFontSetExtents *monofsetinfo; -+#endif - WHERE Visual *theVisual; --WHERE Cursor arrow, cross, tcross, zoom, inviso; -+WHERE Cursor arrow, cross, tcross, zoom, inviso, tlcorner; - WHERE Pixmap iconPix, iconmask; - WHERE Pixmap riconPix, riconmask; - WHERE int showzoomcursor; -@@ -996,6 +1129,10 @@ - WHERE int picType; /* CONV24_8BIT,CONV24_24BIT,etc.*/ - WHERE char *picComments; /* text comments on current pic */ - -+#ifdef TV_L10N -+WHERE int xlocale; /* true if Xlib supports locale */ -+#endif -+ - WHERE int numPages, curPage; /* for multi-page files */ - WHERE char pageBaseName[64]; /* basename for multi-page files */ - -@@ -1029,6 +1166,23 @@ - WHERE unsigned long cols[256]; /* maps pic pixel values to X pixel vals */ - WHERE int fc2pcol[256]; /* maps freecols into pic pixel values */ - WHERE int numcols; /* # of desired colors in picture */ -+#ifdef MACBINARY -+WHERE char macb_file; /* True if this file type is MacBinary */ -+WHERE int handlemacb; /* True if we want to handle MacBinary */ -+#endif -+#if defined(HAVE_PIC) || defined(HAVE_PIC2) -+WHERE int nopicadjust; /* True if we don't want to adjust aspect */ -+#endif -+#ifdef HAVE_PIC2 -+WHERE int pic2split; /* True if we want to split multiblocks */ -+#endif -+#ifdef VS_ADJUST -+WHERE int vsadjust; /* True if we want to adjust aspect of icons */ -+#endif -+#ifdef HAVE_MGCSFX -+WHERE int mgcsfx; /* True if we want to force use MgcSfx */ -+WHERE int nomgcsfx; /* True if we don't want to use MgcSfx */ -+#endif - - /* Std Cmap stuff */ - WHERE byte stdr[256], stdg[256], stdb[256]; /* std 3/3/2 cmap */ -@@ -1083,42 +1237,47 @@ - noFreeCols, /* don't free colors when loading new pic */ - autoquit, /* quit in '-root' or when click on win */ - xerrcode, /* errorcode of last X error */ -- grabDelay; /* # of seconds to sleep at start of Grab */ -+ grabDelay, /* # of seconds to sleep at start of Grab */ -+ startGrab; /* start immediate grab ? */ - - WHERE int state824; /* displays warning when going 8->24 */ - - WHERE float defaspect, /* default aspect ratio to use */ - normaspect; /* normal aspect ratio of this picture */ - --WHERE unsigned long rootbg, rootfg; /* fg/bg for root border */ --WHERE int waitsec; /* secs btwn pics. -1=wait for event */ --WHERE int waitloop; /* loop at end of slide show? */ --WHERE int automax; /* maximize pic on open */ --WHERE int rootMode; /* mode used for -root images */ -+WHERE u_long rootbg, rootfg; /* fg/bg for root border */ -+WHERE u_short imagebgR; -+WHERE u_short imagebgG; /* GRR 19980308: bg for transpar. images */ -+WHERE u_short imagebgB; -+WHERE int have_imagebg; -+WHERE double waitsec; /* secs btwn pics. -1.0=wait for event */ -+WHERE int waitloop; /* loop at end of slide show? */ -+WHERE int automax; /* maximize pic on open */ -+WHERE int rootMode; /* mode used for -root images */ - --WHERE int nostat; /* if true, don't stat() in LdCurDir */ -+WHERE int nostat; /* if true, don't stat() in LdCurDir */ - --WHERE int ctrlColor; /* whether or not to use colored butts */ -+WHERE int ctrlColor; /* whether or not to use colored butts */ - --WHERE char *def_str; /* used by rd_*() routines */ -+WHERE char *def_str; /* used by rd_*() routines */ - WHERE int def_int; --WHERE char *tmpdir; /* equal to "/tmp" or $TMPDIR env var */ --WHERE Pixmap gray25Tile, /* used for 3d effect on 1-bit disp's */ -+WHERE char *tmpdir; /* equal to "/tmp" or $TMPDIR env var */ -+WHERE Pixmap gray25Tile, /* used for 3d effect on 1-bit disp's */ - gray50Tile; --WHERE int autoDelete; /* delete cmd-line files on exit? */ -+WHERE int autoDelete; /* delete cmd-line files on exit? */ - - #define PRINTCMDLEN 256 - WHERE char printCmd[PRINTCMDLEN]; - - /* stuff used for 'info' box */ - WHERE Window infoW; --WHERE int infoUp; /* boolean: whether infobox is visible */ -+WHERE int infoUp; /* boolean: whether infobox is visible */ - WHERE int infoMode; - - - /* stuff used for 'ctrl' box */ - WHERE Window ctrlW; --WHERE int ctrlUp; /* boolean: whether ctrlbox is visible */ -+WHERE int ctrlUp; /* boolean: whether ctrlbox is visible */ - WHERE char *namelist[MAXNAMES]; /* list of file names from argv */ - WHERE char *origlist[MAXNAMES]; /* only names from argv (autoDelete)*/ - WHERE int orignumnames; -@@ -1157,25 +1316,30 @@ - - - /* stuff used for 'browse' box */ --WHERE int anyBrowUp; /* whether *any* browser visible */ -+WHERE int anyBrowUp; /* whether *any* browser visible */ - - /* stuff used for textview windows */ --WHERE int anyTextUp; /* are any text windows visible? */ --WHERE int commentUp; /* comment window up? */ -+WHERE int anyTextUp; /* are any text windows visible? */ -+WHERE int commentUp; /* comment window up? */ - - /* stuff used for xvcut.c */ --WHERE int forceClipFile; /* don't use property clipboard */ --WHERE int clearR, clearG, clearB; /* clear color in 24-bit mode */ -+WHERE int forceClipFile; /* don't use property clipboard */ -+WHERE int clearR, clearG, clearB; /* clear color in 24-bit mode */ - - - /* stuff used for 'ps' box */ - WHERE Window psW; --WHERE int psUp; /* is psW mapped, or what? */ -+WHERE int psUp; /* is psW mapped, or what? */ - WHERE CBUTT encapsCB, pscompCB; - WHERE char *gsDev, *gsGeomStr; - WHERE int gsRes; - - -+/* stuff used for 'pcd' box */ -+WHERE Window pcdW; -+WHERE int pcdUp; /* is pcdW mapped, or what? */ -+ -+ - #ifdef HAVE_JPEG - /* stuff used for 'jpeg' box */ - WHERE Window jpegW; -@@ -1190,6 +1354,91 @@ - #endif - - -+#ifdef HAVE_PNG -+/* stuff used for 'png' box */ -+WHERE Window pngW; -+WHERE int pngUp; /* is pngW mapped, or what? */ -+#endif ++-john + ++-- ++john.cooper@third-harmonic.com +diff -u -r --new-file xv-3.10a.orig/contrib/fnkey-scripts/README xv-3.10a/contrib/fnkey-scripts/README +--- xv-3.10a.orig/contrib/fnkey-scripts/README 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/contrib/fnkey-scripts/README 2007-01-16 02:41:51.000000000 -0600 +@@ -0,0 +1,111 @@ ++-- License and Disclaimer -- ++ ++This patch & script package was written by Alexey Spiridonov, and is ++licensed under the GNU GPLv2. There is NO WARRANTY. ++ ++XV is copyrighted by John Bradley. + -+#ifdef ENABLE_FIXPIX_SMOOTH -+WHERE int do_fixpix_smooth; /* GRR 19980607: runtime FS dithering */ -+#endif ++-- What is this? -- ++ ++This is a small patch for XV that allows you to run scripts by pressing ++a key from F1 through F12 (or more, just change 12 to your number in the ++patch file). ++ ++The patch enables a number of useful features. Here is a my set-up: ++ ++F1: Losslessly rotate JPEG 90 degrees to the right. ++F2: Losslessly rotate JPEG 90 degrees to the left. ++ ++F3: Print the current selection rectangle (on the terminal where xv was ++ launched). This is useful for quickly recording a bunch of positions in ++ an image. Use case: ++ I'm annotating face positions. ++ 1) Select Joe in picture, hit F3, type "Joe" in the terminal. ++ 2) Select Jane in the picture, ... ++ ... ++ n) Copy the text visible in the terminal, and paste it into the ++ JPEG comment. ++ Of course, i would write a more convenient script if I annotated faces ++ with any any frequency. ++ ++F4: Edit JPEG comment (I use it for annotations/tags). ++ ++F5: Log a 'losslessly rotate right' command for batch processing. This ++ writes the rotation command for the current file into a shell script ++ somewhere ("~/photos/bin/rotscript" by default). This is great for ++ slower computers because you don't have to wait for each image to ++ rotate; instead, you just rotate them all at once by running the ++ resulting script. ++F6: Log a 'losslessly rotate left' batch command. ++ ++F8: Crop image on disk, but back-up the uncropped version. You can make ++ a succession of crops this way, with a backup made at every step. ++ This wastes disk space, so be sure to clean up once you get a crop you ++ like. ++F7: Undo the last crop done on this image. This can be repeated until you're ++ back at the original. ++ ++-- Installation -- ++ ++I'll tell you how to get the set-up I described above. Of course, you can ++customize it to your heart's content. ++ ++(( 1 )) ++ ++Go to: ++ ++ http://www.sonic.net/~roelofs/greg_xv.html ++ ++and follow the XV install instructions there. If you are okay with ++reading shell scripts, you might also give this a shot: ++ ++ http://sources.gentoo.org/viewcvs.py/*checkout*/gentoo-x86/media-gfx/xv/xv-3.10a-r12.ebuild ++ ++When you're ready to type "make install", do the following to apply my patch: ++ ++ $ cd WHEREVER_YOU_COMPILED_XV ++ $ patch -p1 --dry-run < PATH/TO/xv-3.10a-fkey-command-patch.greg-xv ++ ++Hopefully, the above command won't complain; if it does, Greg Roelofs ++probably changed his patchset, and my patch has become out of date -- let me ++know. If that went well, run: ++ ++ $ patch -p1 < PATH/TO/xv-3.10a-fkey-command-patch.greg-xv ++ ++Now, simply recompile and install as described in the other instructions. ++ ++(( 2 )) ++ ++Copy 'jpegcrop.sh', 'jpegeditcom.sh', 'jpegundocrop.sh', 'jpegrot.sh', ++'jpeglogrot.sh' to some convenient directory. ++ ++Suggestions: ~/photos/bin, /usr/local/bin, etc... ++ ++Edit 'jpeglogrot.sh' and 'jpegeditcom.sh'. In the former, you need to ++customize the path to 'jpegrot.sh'. In the latter, you should make set ++your favorite editor. The spots to customize are marked as such. ++ ++(( 3 )) ++ ++Open .Xdefaults in your favorite text editor, and paste the following lines ++there: ++ ++xv.F1command: ~/photos/bin/jpegrot.sh 90 %s ++xv.F2command: ~/photos/bin/jpegrot.sh 270 %s ++xv.F3command: @echo "The selection rect for '%s' is at (%d, %d) of size %dx%d." ++xv.F4command: @~/photos/bin/jpegeditcom.sh %s & ++xv.F5command: @~/photos/bin/jpeglogrot.sh 90 %s ++xv.F6command: @~/photos/bin/jpeglogrot.sh 270 %s ++xv.F7command: ~/photos/bin/jpegundocrop.sh %s ++xv.F8command: ~/photos/bin/jpegcrop.sh %s %d %d %d %d ++ ++Change '~/photos/bin/' to the directory you chose in (( 2 )). In case you're ++wondering what the '@' symbol means, it tells XV not to reload the file ++after running this command. The default is to reload the file. ++ ++-- Apologies -- ++ ++I didn't get a chance to run through the above instructions and check ++that they work. I know they're right in spirit, but I might've made a typo ++or two. Even if it's obvious to you, would you please let me know by writing ++to lesha at mit dot edu? +diff -u -r --new-file xv-3.10a.orig/contrib/fnkey-scripts/jpegcrop.sh xv-3.10a/contrib/fnkey-scripts/jpegcrop.sh +--- xv-3.10a.orig/contrib/fnkey-scripts/jpegcrop.sh 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/contrib/fnkey-scripts/jpegcrop.sh 2006-03-11 21:30:03.000000000 -0600 +@@ -0,0 +1,33 @@ ++#!/bin/bash ++FILE=$1 ++WIDTH=$4 ++HEIGHT=$5 ++XPOS=$2 ++YPOS=$3 ++if [[ $XPOS -lt 0 ]]; then ++ echo "Negative x position $XPOS converted to zero, width adjusted." ++ WIDTH=$((WIDTH+XPOS)) ++ XPOS=0 ++fi ++if [[ $YPOS -lt 0 ]]; then ++ echo "Negative y position $YPOS converted to zero, height adjusted." ++ HEIGHT=$((HEIGHT+YPOS)) ++ YPOS=0 ++fi ++if [[ $(($WIDTH+$HEIGHT)) == 0 ]]; then ++ echo "Refusing to crop $FILE with an empty rectangle." ++ exit 1 ++fi ++ ++TMPFILE=`mktemp $FILE.tmp-jpeg-rot-XXXXXXXX` ++if jpegtran -optimize -progressive -crop ${WIDTH}x${HEIGHT}+${XPOS}+${YPOS} \ ++ -copy all $FILE > $TMPFILE; then ++ COUNT=`echo $FILE-uncropped | wc -c` ++ NEXT=$((`ls $FILE-uncropped* | cut -b $COUNT- | grep '^[0-9]*$' \ ++ | sed 's/^0*/'/ | sort -n | tail -n 1`+1)) ++ # the targets shouldn't exist, but -i just in case ++ mv -i $FILE $FILE-uncropped$NEXT ++ mv -i $TMPFILE $FILE ++else ++ rm $TMPFILE ++fi +diff -u -r --new-file xv-3.10a.orig/contrib/fnkey-scripts/jpegeditcom.sh xv-3.10a/contrib/fnkey-scripts/jpegeditcom.sh +--- xv-3.10a.orig/contrib/fnkey-scripts/jpegeditcom.sh 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/contrib/fnkey-scripts/jpegeditcom.sh 2007-01-16 00:23:04.000000000 -0600 +@@ -0,0 +1,12 @@ ++#!/bin/bash ++CFILE=`mktemp $1.tmp-jpeg-comments-XXXXXXXX` ++TMPFILE=`mktemp $1.tmp-jpeg-XXXXXXXX` ++rdjpgcom $1 > $CFILE ++INITIAL=`md5sum $CFILE` ++xterm -e "$EDITOR" "$CFILE" # customize your editor here ++MODIFIED=`md5sum $CFILE` ++if [[ "$INITIAL" != "$MODIFIED" ]]; then ++ mv $1 $TMPFILE ++ wrjpgcom -replace -cfile $CFILE $TMPFILE > $1 ++fi ++rm $TMPFILE $CFILE $CFILE~ +diff -u -r --new-file xv-3.10a.orig/contrib/fnkey-scripts/jpeglogrot.sh xv-3.10a/contrib/fnkey-scripts/jpeglogrot.sh +--- xv-3.10a.orig/contrib/fnkey-scripts/jpeglogrot.sh 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/contrib/fnkey-scripts/jpeglogrot.sh 2007-01-16 00:55:18.000000000 -0600 +@@ -0,0 +1,10 @@ ++#!/bin/bash ++curdir="`pwd`" ++LOG=~/photos/bin/rotscript # customize your install dir here ++if [[ ! -e "$LOG" ]]; then ++ echo '#!/bin/bash' >> "$LOG" ++ chmod u+x "$LOG" ++fi ++echo "# following entry made on `date`" >> "$LOG" ++# also customize the following line ++echo ~/photos/bin/jpegrot \""$1"\" \""$curdir/$2"\" >> "$LOG" +diff -u -r --new-file xv-3.10a.orig/contrib/fnkey-scripts/jpegrot.sh xv-3.10a/contrib/fnkey-scripts/jpegrot.sh +--- xv-3.10a.orig/contrib/fnkey-scripts/jpegrot.sh 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/contrib/fnkey-scripts/jpegrot.sh 2006-07-18 23:10:43.000000000 -0500 +@@ -0,0 +1,7 @@ ++#!/bin/bash ++TMPFILE="`mktemp "$2".tmp-jpeg-rot-XXXXXXXX`" ++if jpegtran -perfect -optimize -progressive -rotate "$1" -copy all "$2" > "$TMPFILE"; then ++ mv "$TMPFILE" "$2" ++else ++ rm "$TMPFILE" ++fi +diff -u -r --new-file xv-3.10a.orig/contrib/fnkey-scripts/jpegundocrop.sh xv-3.10a/contrib/fnkey-scripts/jpegundocrop.sh +--- xv-3.10a.orig/contrib/fnkey-scripts/jpegundocrop.sh 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/contrib/fnkey-scripts/jpegundocrop.sh 2006-03-11 21:30:04.000000000 -0600 +@@ -0,0 +1,8 @@ ++#!/bin/bash ++FILE=$1 ++COUNT=`echo $FILE-uncropped | wc -c` ++LATEST=$((`ls $FILE-uncropped* | cut -b $COUNT- | grep '^[0-9]*$' \ ++ | sed 's/^0*/'/ | sort -n | tail -n 1`)) ++if [[ -f $FILE-uncropped$LATEST ]]; then ++ mv $FILE-uncropped$LATEST $FILE ++fi +diff -u -r --new-file xv-3.10a.orig/tiff/RANLIB.sh xv-3.10a/tiff/RANLIB.sh +--- xv-3.10a.orig/tiff/RANLIB.sh 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/tiff/RANLIB.sh 2004-05-11 01:31:38.000000000 -0500 +@@ -0,0 +1,22 @@ ++#!/bin/sh -f ++# ++# tests to see if the program 'ranlib' exists. If it does, runs ranlib on ++# the first argument (a library name). Otherwise, does nothing, and returns ++# ++# written by John Bradley for the XV 3.00 release ++# thanks to John Hagan for shell-script hackery ++# + -+#ifdef HAVE_PIC2 -+/* stuff used for 'pic2' box */ -+WHERE Window pic2W; -+WHERE int pic2Up; /* is pic2W mapped, or what? */ -+#endif /* HAVE_PIC2 */ ++echo "executing 'ranlib $1'..." + -+#ifdef HAVE_PCD -+/* stuff used for 'pcd' box */ -+WHERE Window pcdW; -+WHERE int pcdUp; /* is pcdW mapped, or what? */ -+#endif /* HAVE_PCD */ ++# Is there a ranlib? Let's try and then suffer the consequences... ++ranlib $1 >& /dev/null + -+#ifdef HAVE_MGCSFX -+/* stuff used for 'mgcsfx' box */ -+WHERE Window mgcsfxW; -+WHERE Window mgcsfxNameW; -+WHERE int mgcsfxUp; /* is mgcsfxW mapped, or what? */ -+#endif /* HAVE_MGCSFX */ ++if [ $? -ne 0 ]; then ++ echo "There doesn't seem to be a ranlib on this system..." ++ echo "Don't worry about it." ++fi + -+#ifdef TV_L10N -+/* stuff used for TextViewer Japanization */ -+# define LOCALE_USASCII 0 -+# define LOCALE_EUCJ 1 -+# define LOCALE_JIS 2 -+# define LOCALE_MSCODE 3 -+ -+# ifndef LOCALE_DEFAULT -+# define LOCALE_DEFAULT 0 -+# endif /* !LOCALE_DEFAULT */ -+ -+# ifndef MAIN -+ extern char *localeList[]; -+# else -+# ifndef LOCALE_NAME_EUC -+# ifndef X_LOCALE -+# if defined(__FreeBSD__) -+ char *localeList[] = {"", "ja_JP.EUC", "none", "none"}; -+# elif defined(__linux__) -+ char *localeList[] = {"", "ja_JP.eucJP", "none", "ja_JP.SJIS"}; -+# elif defined(__sun) || defined(sun) -+ char *localeList[] = {"", "ja", "none", "none"}; -+# elif defined(__sgi) /* sgi, __sgi, __sgi__ (gcc) */ -+ char *localeList[] = {"", "ja_JP.EUC", "none", "none"}; -+# elif defined(sony_news) -+ char *localeList[] = {"", "ja_JP.EUC", "none", "ja_JP.SJIS"}; -+# elif defined(nec) -+ char *localeList[] = {"", "japan", "none", "none"}; -+# elif defined(__hpux) -+ char *localeList[] = {"", "japanese.euc", "none", "japanese"}; -+# elif defined(__osf__) -+ char *localeList[] = {"", "ja_JP.deckanji", "none", "ja_JP.SJIS"}; -+# elif defined(_AIX) -+ char *localeList[] = {"", "ja_JP", "none", "Ja_JP" }; -+# elif defined(__bsdi) -+ char *localeList[] = {"", "Japanese-EUC", "none", "none" }; -+# else -+ char *localeList[] = {"", "ja_JP.EUC", "ja_JP.JIS", "ja_JP.SJIS"}; -+# endif -+# else -+# if (XlibSpecificationRelease > 5) -+ char *localeList[] = {"", "ja_JP.eucJP", "ja_JP.JIS7", -+ "ja_JP.SJIS"}; -+# else -+ char *localeList[] = {"", "ja_JP.ujis", "ja_JP.jis7", -+ "ja_JP.mscode"}; -+# endif -+# endif /* X_LOCALE */ -+# else -+ char *localeList[] = {"", LOCALE_NAME_EUC, -+ LOCALE_NAME_JIS, LOCALE_NAME_MSCODE}; -+# endif /* LOCALE_NAME_EUC */ -+# endif /* MAIN */ -+#endif /* TV_L10N */ -+ - #undef WHERE - - -@@ -1199,8 +1448,11 @@ - /****************************** XV.C ****************************/ - int ReadFileType PARM((char *)); - int ReadPicFile PARM((char *, int, PICINFO *, int)); --int UncompressFile PARM((char *, char *)); -+int UncompressFile PARM((char *, char *, int)); - void KillPageFiles PARM((char *, int)); -+#ifdef MACBINARY -+int RemoveMacbinary PARM((char *, char *)); -+#endif - - void NewPicGetColors PARM((int, int)); - void FixAspect PARM((int, int *, int *)); -@@ -1429,6 +1681,9 @@ - int CheckPoll PARM((int)); - void DIRDeletedFile PARM((char *)); - void DIRCreatedFile PARM((char *)); -+FILE *pic2_OpenOutFile PARM((char *, int *)); -+void pic2_KillNullFile PARM((FILE *)); -+int OpenOutFileDesc PARM((char *)); - - - /*************************** XVBROWSE.C ************************/ -@@ -1448,7 +1703,7 @@ - - /*************************** XVTEXT.C ************************/ - void CreateTextWins PARM((char *, char *)); --void TextView PARM((char *)); -+int TextView PARM((char *)); - void OpenTextView PARM((char *, int, char *, int)); - - void OpenCommentText PARM((void)); -@@ -1466,6 +1721,8 @@ - int TextCheckEvent PARM((XEvent *, int *, int *)); - int TextDelWin PARM((Window)); - -+int CharsetCheckEvent PARM((XEvent *)); -+int CharsetDelWin PARM((Window)); - - - /**************************** XVGAM.C **************************/ -@@ -1502,12 +1759,12 @@ - - - /*************************** XVDIAL.C ***************************/ --void DCreate PARM((DIAL *, Window, int, int, int, int, int, -- int, int, int, u_long, u_long, u_long, -- u_long, char *, char *)); -+void DCreate PARM((DIAL *, Window, int, int, int, int, double, -+ double, double, double, double, u_long, -+ u_long, u_long, u_long, char *, char *)); - --void DSetRange PARM((DIAL *, int, int, int, int)); --void DSetVal PARM((DIAL *, int)); -+void DSetRange PARM((DIAL *, double,double,double,double,double)); -+void DSetVal PARM((DIAL *, double)); - void DSetActive PARM((DIAL *, int)); - void DRedraw PARM((DIAL *)); - int DTrack PARM((DIAL *, int, int)); -@@ -1585,7 +1842,11 @@ - byte *, byte *, int, int, char *)); - - /**************************** XVPBM.C ***************************/ -+#ifdef HAVE_MGCSFX -+int LoadPBM PARM((char *, PICINFO *, int)); -+#else - int LoadPBM PARM((char *, PICINFO *)); -+#endif - int WritePBM PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte *, int, int, int, char *)); - -@@ -1604,6 +1865,11 @@ - int WriteBMP PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte *, int, int)); - -+/**************************** XVWBMP.C ***************************/ -+int LoadWBMP PARM((char *, PICINFO *)); -+int WriteWBMP PARM((FILE *, byte *, int, int, int, byte *, -+ byte *, byte *, int, int)); -+ - /**************************** XVRLE.C ***************************/ - int LoadRLE PARM((char *, PICINFO *)); - -@@ -1642,6 +1908,7 @@ - void JPEGDialog PARM((int)); - int JPEGCheckEvent PARM((XEvent *)); - void JPEGSaveParams PARM((char *, int)); -+void VersionInfoJPEG PARM((void)); /* GRR 19980605 */ - - /**************************** XVTIFF.C ***************************/ - int LoadTIFF PARM((char *, PICINFO *, int)); -@@ -1649,6 +1916,15 @@ - void TIFFDialog PARM((int)); - int TIFFCheckEvent PARM((XEvent *)); - void TIFFSaveParams PARM((char *, int)); -+void VersionInfoTIFF PARM((void)); /* GRR 19980605 */ -+ -+/**************************** XVPNG.C ***************************/ -+int LoadPNG PARM((char *, PICINFO *)); -+void CreatePNGW PARM((void)); -+void PNGDialog PARM((int)); -+int PNGCheckEvent PARM((XEvent *)); -+void PNGSaveParams PARM((char *, int)); -+void VersionInfoPNG PARM((void)); /* GRR 19980605 */ - - /**************************** XVPDS.C ***************************/ - int LoadPDS PARM((char *, PICINFO *)); -@@ -1661,6 +1937,87 @@ - void PSResize PARM((void)); - int LoadPS PARM((char *, PICINFO *, int)); - -+/************************ [JCE] XVZX.C ***************************/ -+ -+int LoadZX PARM((char *, PICINFO *)); -+int WriteZX PARM((FILE *, byte *, int, int, int, byte *, -+ byte *, byte *, int, int, char *)); -+ -+/**************************** XVPCD.C ***************************/ -+int LoadPCD PARM((char *, PICINFO *, int)); -+void CreatePCDW PARM((void)); -+void PCDDialog PARM((int)); -+int PCDCheckEvent PARM((XEvent *)); -+void PCDSetParamOptions PARM((char *)); -+ -+/*************************** XVMAG.C ***************************/ -+int LoadMAG PARM((char *, PICINFO *)); -+int WriteMAG PARM((FILE *, byte *, int, int, int, -+ byte *, byte *, byte *, int, int, char *)); -+ -+/*************************** XVMAKI.C ***************************/ -+int LoadMAKI PARM((char *, PICINFO *)); -+int WriteMAKI PARM((FILE *, byte *, int, int, int, -+ byte *, byte *, byte *, int, int)); -+ -+/*************************** XVPIC.C ***************************/ -+int LoadPIC PARM((char *, PICINFO *)); -+int WritePIC PARM((FILE *, byte *, int, int, int, -+ byte *, byte *, byte *, int, int, char *)); -+ -+/*************************** XVPI.C ***************************/ -+int LoadPi PARM((char *, PICINFO *)); -+int WritePi PARM((FILE *, byte *, int, int, int, -+ byte *, byte *, byte *, int, int, char *)); -+ -+/*************************** XVPIC2.C ***************************/ -+int LoadPIC2 PARM((char *, PICINFO *, int)); -+void CreatePIC2W PARM((void)); -+void PIC2Dialog PARM((int)); -+int PIC2CheckEvent PARM((XEvent *)); -+int PIC2SetParamOptions PARM((char *)); -+ -+/**************************** XVPCD.C ***************************/ -+int LoadPCD PARM((char *, PICINFO *,int)); -+void CreatePCDW PARM((void)); -+void PCDDialog PARM((int)); -+int PCDCheckEvent PARM((XEvent *)); -+void PCDSetParamOptions PARM((char *)); -+ -+/**************************** XVHIPS.C ***************************/ -+int LoadHIPS PARM((char *, PICINFO *)); -+ -+/*************************** XVMGCSFX.C ***************************/ -+int is_mgcsfx PARM((char *, unsigned char *, int)); -+char *mgcsfx_auto_input_com PARM((char *)); -+int LoadMGCSFX PARM((char *, PICINFO *)); -+void CreateMGCSFXW PARM((void)); -+void MGCSFXDialog PARM((int)); -+int MGCSFXCheckEvent PARM((XEvent *)); -+int MGCSFXSaveParams PARM((char *, int)); ++echo "" ++echo "" + -+int getInputCom PARM((void)); -+int getOutputCom PARM((void)); -+ -+/**************************** XVVD.C ****************************/ -+void Vdinit PARM((void)); -+void Vdsettle PARM((void)); -+int Chvdir PARM((char *)); -+void Dirtovd PARM((char *)); -+void Vdtodir PARM((char *)); -+void Dirtosubst PARM((char *)); -+int Mkvdir PARM((char *)); -+void Mkvdir_force PARM((char *)); -+int Rmvdir PARM((char *)); -+int Movevdir PARM((char *, char *)); -+int Isarchive PARM((char *)); -+int Isvdir PARM((char *)); -+void vd_HUPhandler PARM((void)); -+void vd_handler PARM((int)); -+int vd_Xhandler PARM((Display *, XErrorEvent *)); -+int vd_XIOhandler PARM((Display *)); -+void vd_handler_setup PARM((void)); -+ - /*************************** XVPOPUP.C ***************************/ - void CenterMapWindow PARM((Window, int, int, int, int)); - int PopUp PARM((char *, char **, int)); -@@ -1714,3 +2071,13 @@ - void CoordP2E PARM((int, int, int *, int *)); - void CoordE2P PARM((int, int, int *, int *)); - -+#if defined(__mips) && defined(__SYSTYPE_BSD43) -+# define strstr(A,B) pds_strstr((A),(B)) -+# undef S_IFIFO -+#endif /* !mips_bsd */ -+ -+#ifndef SEEK_SET -+# define SEEK_SET 0 -+# define SEEK_CUR 1 -+# define SEEK_END 2 -+#endif -diff -ruN xv-3.10a-bugfixes/xv_mgcsfx.sample xv-3.10a-enhancements/xv_mgcsfx.sample ---- xv-3.10a-bugfixes/xv_mgcsfx.sample 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xv_mgcsfx.sample 2005-04-17 14:04:22.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xv_mgcsfx.sample xv-3.10a/xv_mgcsfx.sample +--- xv-3.10a.orig/xv_mgcsfx.sample 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xv_mgcsfx.sample 2005-04-17 16:04:22.000000000 -0500 @@ -0,0 +1,125 @@ +#/* +# Configuration file for XV with recognition of 'Magic and Suffix' @@ -4344,4166 +1538,9 @@ diff -ruN xv-3.10a-bugfixes/xv_mgcsfx.sample xv-3.10a-enhancements/xv_mgcsfx.sam +# /* SGI(1):magic:0:\x01\xda:.rgb:::: */ +# /* SGI(2):magic:0:\xda\x01:.rgb:::: */ +# /* XWD:magic:0:\0\0\0\7: :::: */ -diff -ruN xv-3.10a-bugfixes/xvbmp.c xv-3.10a-enhancements/xvbmp.c ---- xv-3.10a-bugfixes/xvbmp.c 2005-03-27 18:12:17.000000000 -0800 -+++ xv-3.10a-enhancements/xvbmp.c 2005-04-17 13:56:31.000000000 -0700 -@@ -1,5 +1,5 @@ - /* -- * xvbmp.c - i/o routines for .BMP files (MS Windows 3.x) -+ * xvbmp.c - I/O routines for .BMP files (MS Windows 3.x and later; OS/2) - * - * LoadBMP(fname, numcols) - * WriteBMP(fp, pic, ptype, w, h, r, g, b, numcols, style); -@@ -9,30 +9,39 @@ - - #include "xv.h" - --/* comments on error handling: -- a truncated file is not considered a Major Error. The file is loaded, the -- rest of the pic is filled with 0's. -- -- a file with garbage characters in it is an unloadable file. All allocated -- stuff is tossed, and LoadBMP returns non-zero -- -- not being able to malloc is a Fatal Error. The program is aborted. */ -- -- --#define BI_RGB 0 --#define BI_RLE8 1 --#define BI_RLE4 2 -+/* Comments on error-handling: -+ A truncated file is not considered a Major Error. The file is loaded, -+ and the rest of the pic is filled with 0's. -+ -+ A file with garbage characters in it is an unloadable file. All allocated -+ stuff is tossed, and LoadBMP returns non-zero. -+ -+ Not being able to malloc is a Fatal Error. The program is aborted. */ -+ -+ -+#define BI_RGB 0 /* a.k.a. uncompressed */ -+#define BI_RLE8 1 -+#define BI_RLE4 2 -+#define BI_BITFIELDS 3 /* BMP version 4 */ -+#define BI_JPEG 4 /* BMP version 5 (not yet supported) */ -+#define BI_PNG 5 /* BMP version 5 (not yet supported) */ - - #define WIN_OS2_OLD 12 - #define WIN_NEW 40 - #define OS2_NEW 64 - -+#if (defined(UINT_MAX) && UINT_MAX != 0xffffffffU) -+# error XV's BMP code requires 32-bit unsigned integer type, but u_int isn't -+#endif -+ - static long filesize; - - static int loadBMP1 PARM((FILE *, byte *, u_int, u_int)); - static int loadBMP4 PARM((FILE *, byte *, u_int, u_int, u_int)); - static int loadBMP8 PARM((FILE *, byte *, u_int, u_int, u_int)); --static int loadBMP24 PARM((FILE *, byte *, u_int, u_int)); -+static int loadBMP16 PARM((FILE *, byte *, u_int, u_int, u_int *)); -+static int loadBMP24 PARM((FILE *, byte *, u_int, u_int, u_int)); -+static int loadBMP32 PARM((FILE *, byte *, u_int, u_int, u_int *)); - static u_int getshort PARM((FILE *)); - static u_int getint PARM((FILE *)); - static void putshort PARM((FILE *, int)); -@@ -52,15 +61,14 @@ - PICINFO *pinfo; - /*******************************************/ - { -- FILE *fp; -- int i, c, c1, rv; -- u_int bfSize, bfOffBits, biSize, biWidth, biHeight, biPlanes; -- u_int biBitCount, biCompression, biSizeImage, biXPelsPerMeter; -- u_int biYPelsPerMeter, biClrUsed, biClrImportant; -- int bPad; -- char *cmpstr; -- byte *pic24, *pic8; -- char buf[512], *bname; -+ FILE *fp; -+ int i, c, c1, rv, bPad; -+ u_int bfSize, bfOffBits, biSize, biWidth, biHeight, biPlanes; -+ u_int biBitCount, biCompression, biSizeImage, biXPelsPerMeter; -+ u_int biYPelsPerMeter, biClrUsed, biClrImportant; -+ u_int colormask[3]; -+ char buf[512], *bname, *cmpstr, rgb_bits[16]; -+ byte *pic24, *pic8; - - /* returns '1' on success */ - -@@ -98,14 +106,13 @@ - biClrUsed = getint(fp); - biClrImportant = getint(fp); - } -- - else { /* old bitmap format */ - biWidth = getshort(fp); /* Types have changed ! */ - biHeight = getshort(fp); - biPlanes = getshort(fp); - biBitCount = getshort(fp); - -- /* Not in old versions so have to compute them*/ -+ /* not in old versions, so have to compute them */ - biSizeImage = (((biPlanes * biBitCount*biWidth)+31)/32)*4*biHeight; - - biCompression = BI_RGB; -@@ -126,25 +133,39 @@ - if (FERROR(fp)) { bmpError(bname,"EOF reached in file header"); goto ERROR; } - - -- /* error checking */ -- if ((biBitCount!=1 && biBitCount!=4 && biBitCount!=8 && biBitCount!=24) || -- biPlanes!=1 || biCompression>BI_RLE4 || -+ /* error-checking */ -+ if ((biBitCount!=1 && biBitCount!=4 && biBitCount!=8 && -+ biBitCount!=16 && biBitCount!=24 && biBitCount!=32) || -+ biPlanes!=1 || biCompression>BI_PNG || - biWidth<=0 || biHeight<=0 || - (biClrUsed && biClrUsed > (1 << biBitCount))) { - - sprintf(buf, -- "Bogus BMP File! (%dx%d, Bits=%d, Colors=%d, Planes=%d, Compr=%d)", -+ "Unsupported BMP type (%dx%d, Bits=%d, Colors=%d, Planes=%d, " -+ "Compr=%d)", - biWidth, biHeight, biBitCount, biClrUsed, biPlanes, biCompression); - - bmpError(bname, buf); - goto ERROR; - } - -+ if (biCompression>BI_BITFIELDS) { -+ sprintf(buf, "Unsupported BMP compression method (%s)", -+ biCompression == BI_JPEG? "JPEG" : -+ biCompression == BI_PNG? "PNG" : -+ "unknown/newer than v5"); -+ -+ bmpError(bname, buf); -+ goto ERROR; -+ } -+ - if (((biBitCount==1 || biBitCount==24) && biCompression != BI_RGB) || -- (biBitCount==4 && biCompression==BI_RLE8) || -- (biBitCount==8 && biCompression==BI_RLE4)) { -+ (biBitCount==4 && biCompression!=BI_RGB && biCompression!=BI_RLE4) || -+ (biBitCount==8 && biCompression!=BI_RGB && biCompression!=BI_RLE8) || -+ ((biBitCount==16 || biBitCount==32) && -+ biCompression!=BI_RGB && biCompression!=BI_BITFIELDS)) { - -- sprintf(buf,"Bogus BMP File! (bitCount=%d, Compression=%d)", -+ sprintf(buf,"Unsupported BMP type (bitCount=%d, Compression=%d)", - biBitCount, biCompression); - - bmpError(bname, buf); -@@ -156,20 +177,23 @@ - if (biSize != WIN_OS2_OLD) { - /* skip ahead to colormap, using biSize */ - c = biSize - 40; /* 40 bytes read from biSize to biClrImportant */ -- for (i=0; i<c; i++) getc(fp); -- -+ for (i=0; i<c; i++) -+ getc(fp); - bPad = bfOffBits - (biSize + 14); - } - -+ /* 16-bit or 32-bit color mask */ -+ if (biCompression==BI_BITFIELDS) { -+ colormask[0] = getint(fp); -+ colormask[1] = getint(fp); -+ colormask[2] = getint(fp); -+ bPad -= 12; -+ } -+ - /* load up colormap, if any */ -- if (biBitCount!=24) { -+ if (biBitCount == 1 || biBitCount == 4 || biBitCount == 8) { - int i, cmaplen; - --/* this is superfluous; see identical test in "error checking" block above -- if (biClrUsed > (1 << biBitCount)) -- biClrUsed = (1 << biBitCount); -- */ -- - cmaplen = (biClrUsed) ? biClrUsed : 1 << biBitCount; - for (i=0; i<cmaplen; i++) { - pinfo->b[i] = getc(fp); -@@ -205,7 +229,7 @@ - - /* create pic8 or pic24 */ - -- if (biBitCount==24) { -+ if (biBitCount==16 || biBitCount==24 || biBitCount==32) { - u_int npixels = biWidth * biHeight; - u_int count = 3 * npixels; - -@@ -227,19 +251,35 @@ - WaitCursor(); - - /* load up the image */ -- if (biBitCount == 1) rv = loadBMP1(fp,pic8,biWidth,biHeight); -- else if (biBitCount == 4) rv = loadBMP4(fp,pic8,biWidth,biHeight, -- biCompression); -- else if (biBitCount == 8) rv = loadBMP8(fp,pic8,biWidth,biHeight, -- biCompression); -- else rv = loadBMP24(fp,pic24,biWidth,biHeight); -+ switch (biBitCount) { -+ case 1: -+ rv = loadBMP1(fp, pic8, biWidth, biHeight); -+ break; -+ case 4: -+ rv = loadBMP4(fp, pic8, biWidth, biHeight, biCompression); -+ break; -+ case 8: -+ rv = loadBMP8(fp, pic8, biWidth, biHeight, biCompression); -+ break; -+ case 16: -+ rv = loadBMP16(fp, pic24, biWidth, biHeight, /* v-- BI_RGB */ -+ biCompression == BI_BITFIELDS? colormask : NULL); -+ break; -+ default: -+ if (biBitCount == 32 && biCompression == BI_BITFIELDS) -+ rv = loadBMP32(fp, pic24, biWidth, biHeight, colormask); -+ else /* 24 or (32 and BI_RGB) */ -+ rv = loadBMP24(fp, pic24, biWidth, biHeight, biBitCount); -+ break; -+ } - - if (rv) bmpError(bname, "File appears truncated. Winging it."); - -+ - fclose(fp); - - -- if (biBitCount == 24) { -+ if (biBitCount > 8) { - pinfo->pic = pic24; - pinfo->type = PIC24; - } -@@ -251,6 +291,22 @@ - cmpstr = ""; - if (biCompression == BI_RLE4) cmpstr = ", RLE4 compressed"; - else if (biCompression == BI_RLE8) cmpstr = ", RLE8 compressed"; -+ else if (biCompression == BI_BITFIELDS) { -+ int bit, c[3], i; -+ u_int mask; -+ -+ for (i = 0; i < 3; ++i) { -+ mask = colormask[i]; -+ c[i] = 0; -+ for (bit = 0; bit < 32; ++bit) { -+ if (mask & 1) -+ ++c[i]; -+ mask >>= 1; -+ } -+ } -+ sprintf(rgb_bits, ", RGB%d%d%d", c[0], c[1], c[2]); -+ cmpstr = rgb_bits; -+ } - - pinfo->w = biWidth; pinfo->h = biHeight; - pinfo->normw = pinfo->w; pinfo->normh = pinfo->h; -@@ -282,12 +338,13 @@ - u_int w,h; - { - int i,j,c,bitnum,padw; -- byte *pp; -+ byte *pp = pic8 + ((h - 1) * w); -+ size_t l = w*h; - - c = 0; - padw = ((w + 31)/32) * 32; /* 'w', padded to be a multiple of 32 */ - -- for (i=h-1; i>=0; i--) { -+ for (i=h-1; i>=0 && (pp - pic8 <= l); i--) { - pp = pic8 + (i * w); - if ((i&0x3f)==0) WaitCursor(); - for (j=bitnum=0; j<padw; j++,bitnum++) { -@@ -316,8 +373,8 @@ - u_int w,h,comp; - { - int i,j,c,c1,x,y,nybnum,padw,rv; -- byte *pp; -- -+ byte *pp = pic8 + ((h - 1) * w); -+ size_t l = w*h; - - rv = 0; - c = c1 = 0; -@@ -325,7 +382,7 @@ - if (comp == BI_RGB) { /* read uncompressed data */ - padw = ((w + 7)/8) * 8; /* 'w' padded to a multiple of 8pix (32 bits) */ - -- for (i=h-1; i>=0; i--) { -+ for (i=h-1; i>=0 && (pp - pic8 <= l); i--) { - pp = pic8 + (i * w); - if ((i&0x3f)==0) WaitCursor(); - -@@ -353,7 +410,7 @@ - - if (c) { /* encoded mode */ - c1 = getc(fp); -- for (i=0; i<c; i++,x++,pp++) -+ for (i=0; i<c && (pp - pic8 <= l); i++,x++,pp++) - *pp = (i&1) ? (c1 & 0x0f) : ((c1>>4)&0x0f); - } - -@@ -373,7 +430,7 @@ - } - - else { /* absolute mode */ -- for (i=0; i<c; i++, x++, pp++) { -+ for (i=0; i<c && (pp - pic8 <= l); i++, x++, pp++) { - if ((i&1) == 0) c1 = getc(fp); - *pp = (i&1) ? (c1 & 0x0f) : ((c1>>4)&0x0f); - } -@@ -402,14 +459,18 @@ - u_int w,h,comp; - { - int i,j,c,c1,padw,x,y,rv; -- byte *pp; -+ byte *pp = pic8 + ((h - 1) * w); -+ size_t l = w*h; -+ byte *pend; - - rv = 0; - -+ pend = pic8 + w * h; -+ - if (comp == BI_RGB) { /* read uncompressed data */ - padw = ((w + 3)/4) * 4; /* 'w' padded to a multiple of 4pix (32 bits) */ - -- for (i=h-1; i>=0; i--) { -+ for (i=h-1; i>=0 && (pp - pic8 <= l); i--) { - pp = pic8 + (i * w); - if ((i&0x3f)==0) WaitCursor(); - -@@ -425,12 +486,12 @@ - x = y = 0; - pp = pic8 + x + (h-y-1)*w; - -- while (y<h) { -+ while (y<h && pp<=pend) { - c = getc(fp); if (c == EOF) { rv = 1; break; } - - if (c) { /* encoded mode */ - c1 = getc(fp); -- for (i=0; i<c; i++,x++,pp++) *pp = c1; -+ for (i=0; i<c && pp<=pend; i++,x++,pp++) *pp = c1; - } - - else { /* c==0x00 : escape codes */ -@@ -449,7 +510,7 @@ - } - - else { /* absolute mode */ -- for (i=0; i<c; i++, x++, pp++) { -+ for (i=0; i<c && pp<=pend; i++, x++, pp++) { - c1 = getc(fp); - *pp = c1; - } -@@ -472,26 +533,133 @@ - - - /*******************************************/ --static int loadBMP24(fp, pic24, w, h) -+static int loadBMP16(fp, pic24, w, h, mask) -+ FILE *fp; -+ byte *pic24; -+ u_int w, h, *mask; -+{ -+ int x, y; -+ byte *pp = pic24 + ((h - 1) * w * 3); -+ size_t l = w*h*3; -+ u_int buf, colormask[6]; -+ int i, bit, bitshift[6], colorbits[6], bitshift2[6]; -+ -+ if (mask == NULL) { /* RGB555 */ -+ colormask[0] = 0x00007c00; -+ colormask[1] = 0x000003e0; -+ colormask[2] = 0x0000001f; -+ colormask[3] = 0x7c000000; -+ colormask[4] = 0x03e00000; -+ colormask[5] = 0x001f0000; -+ bitshift[0] = 7; bitshift2[0] = 0; -+ bitshift[1] = 2; bitshift2[1] = 0; -+ bitshift[2] = 0; bitshift2[2] = 3; -+ bitshift[3] = 23; bitshift2[3] = 0; -+ bitshift[4] = 18; bitshift2[4] = 0; -+ bitshift[5] = 13; bitshift2[5] = 0; -+ } else { -+ colormask[0] = mask[0]; -+ colormask[1] = mask[1]; -+ colormask[2] = mask[2]; -+ colormask[3] = (mask[0] & 0xffff) << 16; -+ colormask[4] = (mask[1] & 0xffff) << 16; -+ colormask[5] = (mask[2] & 0xffff) << 16; -+ -+ for (i = 0; i < 3; ++i) { -+ buf = colormask[i]; -+ -+ bitshift[i] = 0; -+ for (bit = 0; bit < 32; ++bit) { -+ if (buf & 1) -+ break; -+ else -+ ++bitshift[i]; -+ buf >>= 1; -+ } -+ bitshift[i+3] = bitshift[i] + 16; -+ -+ colorbits[i] = 0; -+ for (; bit < 32; ++bit) { -+ if (buf & 1) -+ ++colorbits[i]; -+ else -+ break; -+ buf >>= 1; -+ } -+ if (colorbits[i] > 8) { /* over 8-bit depth */ -+ bitshift[i] += (colorbits[i] - 8); -+ bitshift[i+3] = bitshift[i] + 16; -+ bitshift2[i] = bitshift2[i+3] = 0; -+ } else -+ bitshift2[i] = bitshift2[i+3] = 8 - colorbits[i]; -+ } -+ } -+ -+ if (DEBUG > 1) -+ fprintf(stderr, "loadBMP16: bitfields\n" -+ "\tR: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" -+ "\t (mask = %08x, shift >>%2d, <<%2d)\n" -+ "\tG: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" -+ "\t (mask = %08x, shift >>%2d, <<%2d)\n" -+ "\tB: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" -+ "\t (mask = %08x, shift >>%2d, <<%2d)\n", -+ colorbits[0], colormask[0], bitshift[0], bitshift2[0], -+ colormask[3], bitshift[3], bitshift2[3], -+ colorbits[1], colormask[1], bitshift[1], bitshift2[1], -+ colormask[4], bitshift[4], bitshift2[4], -+ colorbits[2], colormask[2], bitshift[2], bitshift2[2], -+ colormask[5], bitshift[5], bitshift2[5]); -+ -+ for (y = h-1; y >= 0 && (pp - pic24 <= l); y--) { -+ pp = pic24 + (3 * w * y); -+ if ((y&0x3f)==0) WaitCursor(); -+ -+ for (x = w; x > 1; x -= 2) { -+ buf = getint(fp); -+ *(pp++) = (buf & colormask[0]) >> bitshift[0] << bitshift2[0]; -+ *(pp++) = (buf & colormask[1]) >> bitshift[1] << bitshift2[1]; -+ *(pp++) = (buf & colormask[2]) >> bitshift[2] << bitshift2[2]; -+ *(pp++) = (buf & colormask[3]) >> bitshift[3] << bitshift2[3]; -+ *(pp++) = (buf & colormask[4]) >> bitshift[4] << bitshift2[4]; -+ *(pp++) = (buf & colormask[5]) >> bitshift[5] << bitshift2[5]; -+ } -+ if (w & 1) { /* padded to 2 pix */ -+ buf = getint(fp); -+ *(pp++) = (buf & colormask[0]) >> bitshift[0]; -+ *(pp++) = (buf & colormask[1]) >> bitshift[1]; -+ *(pp++) = (buf & colormask[2]) >> bitshift[2]; -+ } -+ } -+ -+ return FERROR(fp)? 1 : 0; -+} -+ -+ -+ -+/*******************************************/ -+static int loadBMP24(fp, pic24, w, h, bits) /* also handles 32-bit BI_RGB */ - FILE *fp; - byte *pic24; -- u_int w,h; -+ u_int w,h, bits; - { - int i,j,padb,rv; -- byte *pp; -+ byte *pp = pic24 + ((h - 1) * w * 3); -+ size_t l = w*h*3; - - rv = 0; - - padb = (4 - ((w*3) % 4)) & 0x03; /* # of pad bytes to read at EOscanline */ -+ if (bits==32) padb = 0; - - for (i=h-1; i>=0; i--) { - pp = pic24 + (i * w * 3); - if ((i&0x3f)==0) WaitCursor(); - -- for (j=0; j<w; j++) { -+ for (j=0; j<w && (pp - pic24 <= l); j++) { - pp[2] = getc(fp); /* blue */ - pp[1] = getc(fp); /* green */ - pp[0] = getc(fp); /* red */ -+ if (bits==32) getc(fp); - pp += 3; - } - -@@ -507,6 +675,70 @@ - - - /*******************************************/ -+static int loadBMP32(fp, pic24, w, h, colormask) /* 32-bit BI_BITFIELDS only */ -+ FILE *fp; -+ byte *pic24; -+ u_int w, h, *colormask; -+{ -+ int x, y; -+ byte *pp; -+ u_int buf; -+ int i, bit, bitshift[3], colorbits[3], bitshift2[3]; -+ -+ for (i = 0; i < 3; ++i) { -+ buf = colormask[i]; -+ -+ bitshift[i] = 0; -+ for (bit = 0; bit < 32; ++bit) { -+ if (buf & 1) -+ break; -+ else -+ ++bitshift[i]; -+ buf >>= 1; -+ } -+ -+ colorbits[i] = 0; -+ for (; bit < 32; ++bit) { -+ if (buf & 1) -+ ++colorbits[i]; -+ else -+ break; -+ buf >>= 1; -+ } -+ if (colorbits[i] > 8) { /* over 8-bit depth */ -+ bitshift[i] += (colorbits[i] - 8); -+ bitshift2[i] = 0; -+ } else -+ bitshift2[i] = 8 - colorbits[i]; -+ } -+ -+ if (DEBUG > 1) -+ fprintf(stderr, "loadBMP32: bitfields\n" -+ "\tR: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" -+ "\tG: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" -+ "\tB: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n", -+ colorbits[0], colormask[0], bitshift[0], bitshift2[0], -+ colorbits[1], colormask[1], bitshift[1], bitshift2[1], -+ colorbits[2], colormask[2], bitshift[2], bitshift2[2]); -+ -+ for (y = h-1; y >= 0; y--) { -+ pp = pic24 + (3 * w * y); -+ if ((y&0x3f)==0) WaitCursor(); -+ -+ for(x = w; x > 0; x --) { -+ buf = getint(fp); -+ *(pp++) = (buf & colormask[0]) >> bitshift[0] << bitshift2[0]; -+ *(pp++) = (buf & colormask[1]) >> bitshift[1] << bitshift2[1]; -+ *(pp++) = (buf & colormask[2]) >> bitshift[2] << bitshift2[2]; -+ } -+ } -+ -+ return FERROR(fp)? 1 : 0; -+} -+ -+ -+ -+/*******************************************/ - static u_int getshort(fp) - FILE *fp; - { -@@ -523,7 +755,7 @@ - int c, c1, c2, c3; - c = getc(fp); c1 = getc(fp); c2 = getc(fp); c3 = getc(fp); - return ((u_int) c) + -- (((u_int) c1) << 8) + -+ (((u_int) c1) << 8) + - (((u_int) c2) << 16) + - (((u_int) c3) << 24); - } -diff -ruN xv-3.10a-bugfixes/xvbrowse.c xv-3.10a-enhancements/xvbrowse.c ---- xv-3.10a-bugfixes/xvbrowse.c 2004-05-16 18:01:25.000000000 -0700 -+++ xv-3.10a-enhancements/xvbrowse.c 2005-04-25 23:30:27.000000000 -0700 -@@ -24,6 +24,10 @@ - typedef unsigned int mode_t; /* file mode bits */ - #endif - -+#ifndef MAX -+# define MAX(a,b) (((a)>(b))?(a):(b)) /* used only for wheelmouse support */ -+#endif -+ - - /* load up built-in icons */ - #include "bits/br_file" -@@ -36,6 +40,7 @@ - #include "bits/br_error" - /* #include "bits/br_unknown" commented out (near line 492) */ - #include "bits/br_cmpres" -+#include "bits/br_bzip2" - - #include "bits/br_gif" - #include "bits/br_pm" -@@ -50,11 +55,20 @@ - #include "bits/br_tiff" - #include "bits/br_pds" - #include "bits/br_ps" -+#include "bits/br_pcd" - #include "bits/br_iff" - #include "bits/br_targa" - #include "bits/br_xpm" - #include "bits/br_xwd" - #include "bits/br_fits" -+#include "bits/br_png" -+#include "bits/br_zx" /* [JCE] The Spectrum+3 icon */ -+#include "bits/br_mag" -+#include "bits/br_maki" -+#include "bits/br_pic" -+#include "bits/br_pi" -+#include "bits/br_pic2" -+#include "bits/br_mgcsfx" - - #include "bits/br_trash" - #include "bits/fcurs" -@@ -94,14 +108,23 @@ - #define BF_XPM 25 - #define BF_XWD 26 - #define BF_FITS 27 --#define BF_MAX 28 /* # of built-in icons */ -+#define BF_PNG 28 -+#define BF_ZX 29 /* [JCE] Spectrum SCREEN$ */ -+#define BF_PCD 30 -+#define BF_BZIP2 31 -+#define JP_EXT_BF (BF_BZIP2) -+#define BF_MAG (JP_EXT_BF + 1) -+#define BF_MAKI (JP_EXT_BF + 2) -+#define BF_PIC (JP_EXT_BF + 3) -+#define BF_PI (JP_EXT_BF + 4) -+#define BF_PIC2 (JP_EXT_BF + 5) -+#define BF_MGCSFX (JP_EXT_BF + 6) -+#define JP_EXT_BF_END (BF_MGCSFX) -+#define BF_MAX (JP_EXT_BF_END + 1) /* # of built-in icons */ - - #define ISLOADABLE(ftyp) (ftyp!=BF_DIR && ftyp!=BF_CHR && ftyp!=BF_BLK && \ - ftyp!=BF_SOCK && ftyp!=BF_FIFO) - --#define DEF_BROWWIDE 615 /* default size of window */ --#define DEF_BROWHIGH 356 -- - #define SCROLLVERT 8 /* height of scroll region at top/bottom of iconw */ - #define PAGEVERT 40 /* during rect drag, if further than this, page */ - -@@ -113,16 +136,35 @@ - #define BOTMARGIN 58 /* room for a row of buttons and a line of text */ - #define LRMARGINS 5 /* left and right margins */ - --#define ISIZE_WIDE 80 /* maximum size of an icon */ --#define ISIZE_HIGH 60 -+/* some people like bigger icons; 4:3 aspect ratio is recommended -+ * (NOTE: standard XV binaries will not be able to read larger icons!) */ -+#ifndef ISIZE_WIDE -+# define ISIZE_WIDE 80 /* maximum size of an icon */ -+#endif -+#ifndef ISIZE_HIGH -+# define ISIZE_HIGH 60 -+#endif - --#define ISPACE_WIDE (ISIZE_WIDE+16) /* icon spacing */ -+#ifndef ISIZE_WPAD -+# define ISIZE_WPAD 16 /* extra horizontal padding between icons */ -+#endif -+ -+#ifndef INUM_WIDE -+# define INUM_WIDE 6 /* size initial window to hold this many icons */ -+#endif -+#ifndef INUM_HIGH -+# define INUM_HIGH 3 -+#endif -+ -+#define ISPACE_WIDE (ISIZE_WIDE+ISIZE_WPAD) /* icon spacing */ - #define ISPACE_TOP 4 /* dist btwn top of ISPACE and ISIZE */ - #define ISPACE_TTOP 4 /* dist btwn bot of icon and title */ - #define ISPACE_HIGH (ISIZE_HIGH+ISPACE_TOP+ISPACE_TTOP+16+4) - - #define DBLCLICKTIME 300 /* milliseconds */ - -+#define COUNT(x) (sizeof (x) / sizeof (x)[0]) -+ - /* button/menu indicies */ - #define BR_CHDIR 0 - #define BR_DELETE 1 -@@ -140,12 +182,23 @@ - #define BR_NBUTTS 13 /* # of command buttons */ - #define BR_SEP1 13 /* separator */ - #define BR_HIDDEN 14 -+#ifdef AUTO_EXPAND -+#define BR_CLEARVD 15 -+#define BR_SELFILES 16 -+#define BR_NCMDS 17 /* # of menu commands */ -+#else - #define BR_SELFILES 15 - #define BR_NCMDS 16 /* # of menu commands */ -+#endif - - #define BUTTW 80 - #define BUTTH 24 - -+/* original size of window was 615 x 356 (for 80x60 thumbnails in 6x3 array) */ -+#define DEF_BROWWIDE (ISPACE_WIDE * INUM_WIDE + LRMARGINS * 2 + 29) -+#define DEF_BROWHIGH (ISPACE_HIGH * INUM_HIGH + BUTTH * 2 + 16 + 28) -+/* last number is a fudge--e.g., extra spaces, borders, etc. -----^ */ -+ - static char *showHstr = "Show hidden files"; - static char *hideHstr = "Hide 'hidden' files"; - -@@ -164,6 +217,9 @@ - "Close window\t^c", - MBSEP, - "Show hidden files", /* no equiv */ -+#ifdef AUTO_EXPAND -+ "Clear virtual directory", -+#endif - "Select files...\t^f" - }; - -@@ -209,6 +265,13 @@ - } BROWINFO; - - -+/* keep track of last icon visible in each path */ -+typedef struct IVIS IVIS; -+ struct IVIS { IVIS *next; -+ char *name; -+ int icon; -+ }; -+ - static Cursor movecurs, copycurs, delcurs; - static BROWINFO binfo[MAXBRWIN]; - static Pixmap bfIcons[BF_MAX], trashPix; -@@ -294,10 +357,16 @@ - static void cp_special PARM((struct stat *, int)); - static void cp_fifo PARM((struct stat *, int)); - -+#ifdef AUTO_EXPAND -+static int stat2bf PARM((u_int, char *)); -+#else - static int stat2bf PARM((u_int)); -+#endif - - static int selmatch PARM((char *, char *)); - static int selmatch1 PARM((char *, char *)); -+static void recIconVisible PARM((char *, int)); -+static void restIconVisible PARM((BROWINFO *)); - - - -@@ -511,9 +580,10 @@ - bfIcons[BF_JFIF]=MakePix1(br->win,br_jfif_bits,br_jfif_width,br_jfif_height); - bfIcons[BF_TIFF]=MakePix1(br->win,br_tiff_bits,br_tiff_width,br_tiff_height); - bfIcons[BF_PDS] =MakePix1(br->win,br_pds_bits, br_pds_width, br_pds_height); -- -- bfIcons[BF_COMPRESS]= MakePix1(br->win, br_cmpres_bits, -- br_cmpres_width, br_cmpres_height); -+ bfIcons[BF_COMPRESS] = MakePix1(br->win, br_cmpres_bits, -+ br_cmpres_width, br_cmpres_height); -+ bfIcons[BF_BZIP2] = MakePix1(br->win, br_bzip2_bits, -+ br_bzip2_width, br_bzip2_height); - - bfIcons[BF_PS] =MakePix1(br->win,br_ps_bits, br_ps_width, br_ps_height); - bfIcons[BF_IFF] =MakePix1(br->win,br_iff_bits, br_iff_width, br_iff_height); -@@ -524,6 +594,16 @@ - bfIcons[BF_XPM] =MakePix1(br->win,br_xpm_bits, br_xpm_width, br_xpm_height); - bfIcons[BF_XWD] =MakePix1(br->win,br_xwd_bits, br_xwd_width, br_xwd_height); - bfIcons[BF_FITS]=MakePix1(br->win,br_fits_bits,br_fits_width,br_fits_height); -+ bfIcons[BF_PNG] =MakePix1(br->win,br_png_bits, br_png_width, br_png_height); -+ bfIcons[BF_ZX] =MakePix1(br->win,br_zx_bits, br_zx_width, br_zx_height); -+ bfIcons[BF_PCD] =MakePix1(br->win,br_pcd_bits, br_pcd_width, br_pcd_height); -+ bfIcons[BF_MAG] =MakePix1(br->win,br_mag_bits, br_mag_width, br_mag_height); -+ bfIcons[BF_MAKI]=MakePix1(br->win,br_maki_bits,br_maki_width,br_maki_height); -+ bfIcons[BF_PIC] =MakePix1(br->win,br_pic_bits, br_pic_width, br_pic_height); -+ bfIcons[BF_PI] =MakePix1(br->win,br_pi_bits, br_pi_width, br_pi_height); -+ bfIcons[BF_PIC2]=MakePix1(br->win,br_pic2_bits,br_pic2_width,br_pic2_height); -+ bfIcons[BF_MGCSFX] = MakePix1(br->win,br_mgcsfx_bits, -+ br_mgcsfx_width,br_mgcsfx_height); - - - /* check that they all got built */ -@@ -698,6 +778,9 @@ - } - } - -+#ifdef VS_RESCMAP -+static int _IfTempOut=0; -+#endif - - /***************************************************************/ - void KillBrowseWindows() -@@ -730,7 +813,6 @@ - return 0; - } - -- - /***************************************************************/ - static int brChkEvent(br, xev) - BROWINFO *br; -@@ -745,15 +827,32 @@ - - if (!hasBeenSized) return 0; /* ignore evrythng until we get 1st Resize */ - -+ -+#ifdef VS_RESCMAP -+ /* force change color map if have LocalCmap */ -+ if (browPerfect && browCmap && (_IfTempOut==2)) { -+ int i; -+ XSetWindowAttributes xswa; -+ -+ xswa.colormap = LocalCmap? LocalCmap : theCmap; -+ for (i=0; i<MAXBRWIN; ++i) -+ XChangeWindowAttributes(theDisp, binfo[i].win, CWColormap, &xswa); -+ XFlush(theDisp); -+ _IfTempOut=1; -+ } -+#endif -+ - if (xev->type == Expose) { - int x,y,w,h; - XExposeEvent *e = (XExposeEvent *) xev; - x = e->x; y = e->y; w = e->width; h = e->height; - - /* throw away excess redraws for 'dumb' windows */ -- if (e->count > 0 && (e->window == br->scrl.win)) {} -+ if (e->count > 0 && (e->window == br->scrl.win)) -+ ; - -- else if (e->window == br->scrl.win) SCRedraw(&(br->scrl)); -+ else if (e->window == br->scrl.win) -+ SCRedraw(&(br->scrl)); - - else if (e->window == br->win || e->window == br->iconW) { /* smart wins */ - /* group individual expose rects into a single expose region */ -@@ -806,13 +905,57 @@ - int i,x,y; - x = e->x; y = e->y; - -- if (e->button == Button1) { -+#ifdef VS_RESCMAP -+ if (browCmap && browPerfect && (_IfTempOut!=0)) -+ { -+ XSetWindowAttributes xswa; -+ _IfTempOut--; -+ xswa.colormap = browCmap; -+ for(i=0;i<MAXBRWIN;i++) -+ XChangeWindowAttributes(theDisp, binfo[i].win, CWColormap, &xswa); -+ XFlush(theDisp); -+ } -+ -+#endif -+ -+ if (e->button == Button1) { - if (e->window == br->win) clickBrow(br,x,y); - else if (e->window == br->scrl.win) SCTrack(&(br->scrl),x,y); - else if (e->window == br->iconW) { - i = clickIconWin(br, x,y,(unsigned long) e->time, - (e->state&ControlMask) || (e->state&ShiftMask)); -- -+ } -+ else rv = 0; -+ } -+ else if (e->button == Button4) { /* note min vs. max, + vs. - */ -+ /* scroll regardless of where we are in the browser window */ -+ if (e->window == br->win || -+ e->window == br->scrl.win || -+ e->window == br->iconW) -+ { -+ SCRL *sp=&(br->scrl); -+ int halfpage=MAX(1,sp->page/2); /* user resize to 1 line? */ -+ -+ if (sp->val > sp->min+halfpage) -+ SCSetVal(sp,sp->val-halfpage); -+ else -+ SCSetVal(sp,sp->min); -+ } -+ else rv = 0; -+ } -+ else if (e->button == Button5) { /* note max vs. min, - vs. + */ -+ /* scroll regardless of where we are in the browser window */ -+ if (e->window == br->win || -+ e->window == br->scrl.win || -+ e->window == br->iconW) -+ { -+ SCRL *sp=&(br->scrl); -+ int halfpage=MAX(1,sp->page/2); /* user resize to 1 line? */ -+ -+ if (sp->val < sp->max-halfpage) -+ SCSetVal(sp,sp->val+halfpage); -+ else -+ SCSetVal(sp,sp->max); - } - else rv = 0; - } -@@ -1101,6 +1244,10 @@ - case BR_SELFILES: doSelFilesCmd(br); break; - - case BR_RECURSUP: doRecurseCmd(br); break; -+ -+#ifdef AUTO_EXPAND -+ case BR_CLEARVD: Vdsettle(); break; -+#endif - } - } - -@@ -1250,6 +1397,18 @@ - int i, allowtext; - - if (!nostr) setSelInfoStr(br, sel); -+#ifdef AUTO_EXPAND -+ if (Isvdir(br->path)) { -+ BTSetActive(&br->but[BR_DELETE], 0); -+ br->cmdMB.dim[BR_DELETE] = 1; -+ -+ BTSetActive(&br->but[BR_RENAME], 0); -+ br->cmdMB.dim[BR_RENAME] = 1; -+ -+ BTSetActive(&br->but[BR_MKDIR], 0); -+ br->cmdMB.dim[BR_MKDIR] = 1; -+ } else { -+#endif - BTSetActive(&br->but[BR_DELETE], br->numlit>0); - br->cmdMB.dim[BR_DELETE] = !(br->numlit>0); - -@@ -1258,6 +1417,11 @@ - - BTSetActive(&br->but[BR_GENICON], br->numlit>0); - br->cmdMB.dim[BR_GENICON] = !(br->numlit>0); -+#ifdef AUTO_EXPAND -+ BTSetActive(&br->but[BR_MKDIR], 1); -+ br->cmdMB.dim[BR_MKDIR] = 0; -+ } -+#endif - - /* turn on 'text view' cmd if exactly one non-dir is lit */ - allowtext = 0; -@@ -1318,8 +1482,11 @@ - struct stat st; - - sprintf(buf, "%s%s", br->path, bf->name); /* build filename */ -+#ifdef AUTO_EXPAND -+ Dirtovd(buf); -+#endif - if (stat(buf, &st) == 0) { -- sprintf(buf, "%s: %ld bytes", bf->name, st.st_size); -+ sprintf(buf, "%s: %ld bytes", bf->name, (long)st.st_size); - strcat(buf, buf1); - } - } -@@ -1598,6 +1765,10 @@ - { - int sval, first, numvis; - -+ /* if we know what path we have, remember last visible icon for this path */ -+ if (br->path) -+ recIconVisible(br->path, num); -+ - /* if icon #i isn't visible, adjust scrollbar so it *is* */ - - sval = br->scrl.val; -@@ -1649,29 +1820,14 @@ - return; - } - -- - /***************************************************************/ --static int clickIconWin(br, mx, my, mtime, multi) -- BROWINFO *br; -- int mx,my,multi; -- unsigned long mtime; -+static int updateSel(br, sel, multi, mtime) -+ BROWINFO *br; -+ int sel, multi; -+ unsigned long mtime; - { -- /* returns '-1' normally, returns an index into bfList[] if the user -- double-clicks an icon */ -- -- int i,j, rv, sel, cpymode, dodel; -- BROWINFO *destBr; -- BFIL *bf; -- char buf[256], *destFolderName; -- -- rv = -1; /* default return value */ -- if (!br->bfList || !br->bfLen) return rv; -- -- destBr = br; destFolderName = "."; -- -- sel = mouseInWhichIcon(br, mx, my); -- -- dodel = 0; -+ int i; -+ BFIL *bf; - - if (sel == -1) { /* clicked on nothing */ - if (!multi) { /* deselect all */ -@@ -1728,11 +1884,12 @@ - - - /* see if we've double-clicked something */ -- if (sel==br->lastIconClicked && mtime-br->lastClickTime < DBLCLICKTIME) { -+ if (mtime && -+ sel==br->lastIconClicked && mtime-br->lastClickTime < DBLCLICKTIME) { - br->lastIconClicked = -1; /* YES */ - - doubleClick(br, sel); -- return rv; -+ return -1; - } - - else { -@@ -1741,9 +1898,36 @@ - } - } - -- - changedNumLit(br, -1, 0); -+ return 0; -+} -+ - -+/***************************************************************/ -+static int clickIconWin(br, mx, my, mtime, multi) -+ BROWINFO *br; -+ int mx,my,multi; -+ unsigned long mtime; -+{ -+ /* returns '-1' normally, returns an index into bfList[] if the user -+ double-clicks an icon */ -+ -+ int i,j, sel, cpymode, dodel; -+ BROWINFO *destBr; -+ BFIL *bf; -+ char buf[256], *destFolderName; -+ -+ if (!br->bfList || !br->bfLen) return -1; -+ -+ destBr = br; destFolderName = "."; -+ -+ sel = mouseInWhichIcon(br, mx, my); -+ dodel = 0; -+ -+ recIconVisible(br->path, sel); -+ -+ if (updateSel(br, sel, multi, mtime)) -+ return -1; - - - { /* track mouse until button1 is released */ -@@ -2098,7 +2282,7 @@ - } - } /* end of 'tracking' sub-function */ - -- return rv; -+ return -1; - } - - /*******************************************/ -@@ -2164,15 +2348,35 @@ - else sprintf(buf, "%s%s", br->path, br->bfList[sel].name); - #endif - -+#ifdef AUTO_EXPAND -+ if (Chvdir(buf)) { -+#else - if (chdir(buf)) { -+#endif - char str[512]; - sprintf(str,"Unable to cd to '%s'\n", br->bfList[sel].name); - setBrowStr(br, str); - XBell(theDisp, 50); - } - else { -+#ifdef AUTO_EXPAND -+ if (Isvdir(buf)) { -+ BTSetActive(&br->but[BR_DELETE], 0); -+ br->cmdMB.dim[BR_DELETE] = 1; -+ -+ BTSetActive(&br->but[BR_RENAME], 0); -+ br->cmdMB.dim[BR_RENAME] = 1; -+ -+ BTSetActive(&br->but[BR_MKDIR], 0); -+ br->cmdMB.dim[BR_MKDIR] = 1; -+ } else { -+ BTSetActive(&br->but[BR_MKDIR], 1); -+ br->cmdMB.dim[BR_MKDIR] = 0; -+ } -+#endif - scanDir(br); - SCSetVal(&(br->scrl), 0); /* reset to top on a chdir */ -+ restIconVisible(br); - } - } - -@@ -2193,6 +2397,28 @@ - } - else { *event_retP = LOADPIC; SetDirFName(buf); } - -+#ifdef VS_RESCMAP -+ /* Change Colormap for browser */ -+ if (browPerfect && browCmap) -+ { -+ int i; -+ XSetWindowAttributes xswa; -+ if(LocalCmap) -+ { -+ xswa.colormap = LocalCmap; -+ _IfTempOut=2; -+ } -+ else -+ { -+ xswa.colormap = theCmap; -+ _IfTempOut=2; -+ } -+ for(i=0;i<MAXBRWIN;i++) -+ XChangeWindowAttributes(theDisp, binfo[i].win, CWColormap, &xswa); -+ XFlush(theDisp); -+ } -+#endif -+ - *event_doneP = 1; /* make MainLoop load image */ - } - } -@@ -2347,6 +2573,9 @@ - - /* try to open this file */ - sprintf(foo, "%s%s", br->path, br->bfList[i].name); -+#ifdef AUTO_EXPAND -+ Dirtovd(foo); -+#endif - for (j=0; j<numnames && strcmp(namelist[j],foo); j++); - if (j<numnames) { - curname = nList.selected = j; -@@ -2362,6 +2591,9 @@ - else { /* not SPACE, or SPACE and lit=1 and not shift */ - for (i=0; i<br->bfLen && !br->bfList[i].lit; i++); /* find lit one */ - sprintf(fname, "%s%s", br->path, br->bfList[i].name); -+#ifdef AUTO_EXPAND -+ Dirtovd(fname); -+#endif - viewsel = !(strcmp(fname, fullfname)); - - if (viewsel) { -@@ -2553,7 +2785,11 @@ - } - #endif - -+#ifdef AUTO_EXPAND -+ if (Chvdir(tmppath)) { -+#else - if (chdir(tmppath)) { -+#endif - char str[512]; - sprintf(str,"Unable to cd to '%s'\n", tmppath); - MBRedraw(&(br->dirMB)); -@@ -2561,8 +2797,24 @@ - XBell(theDisp, 50); - } - else { -+#ifdef AUTO_EXPAND -+ if (Isvdir(tmppath)) { -+ BTSetActive(&br->but[BR_DELETE], 0); -+ br->cmdMB.dim[BR_DELETE] = 1; -+ -+ BTSetActive(&br->but[BR_RENAME], 0); -+ br->cmdMB.dim[BR_RENAME] = 1; -+ -+ BTSetActive(&br->but[BR_MKDIR], 0); -+ br->cmdMB.dim[BR_MKDIR] = 1; -+ } else { -+ BTSetActive(&br->but[BR_MKDIR], 1); -+ br->cmdMB.dim[BR_MKDIR] = 0; -+ } -+#endif - scanDir(br); - SCSetVal(&br->scrl, 0); /* reset to top of window on a chdir */ -+ restIconVisible(br); - } - } - } -@@ -2581,7 +2833,11 @@ - if ((strlen(br->path) > (size_t) 2) && br->path[strlen(br->path)-1] == '/') - br->path[strlen(br->path)-1] = '\0'; - -+#ifdef AUTO_EXPAND -+ rv = Chvdir(br->path); -+#else - rv = chdir(br->path); -+#endif - if (rv) { - char str[512]; - sprintf(str, "Unable to cd to '%s'\n", br->path); -@@ -2589,6 +2845,23 @@ - XBell(theDisp, 50); - } - -+#ifdef AUTO_EXPAND -+ if (Isvdir(br->path)) { -+ BTSetActive(&br->but[BR_DELETE], 0); -+ br->cmdMB.dim[BR_DELETE] = 1; -+ -+ BTSetActive(&br->but[BR_RENAME], 0); -+ br->cmdMB.dim[BR_RENAME] = 1; -+ -+ BTSetActive(&br->but[BR_MKDIR], 0); -+ br->cmdMB.dim[BR_MKDIR] = 1; -+ } else { -+ BTSetActive(&br->but[BR_MKDIR], 1); -+ br->cmdMB.dim[BR_MKDIR] = 0; -+ } -+#endif -+ -+ restIconVisible(br); - strcat(br->path, "/"); /* put trailing '/' back on */ - return rv; - } -@@ -2615,8 +2888,13 @@ - strcpy(dstbr->mblist[i], srcbr->mblist[i]); - } - -- dstbr->dirMB.list = srcbr->mblist; -+#if 0 -+ dstbr->dirMB.list = srcbr->mblist; /* original bug..? */ - dstbr->dirMB.nlist = srcbr->ndirs; -+#else -+ dstbr->dirMB.list = dstbr->mblist; /* fixed by */ -+ dstbr->dirMB.nlist = dstbr->ndirs; /* jp-extension. */ -+#endif - - XClearArea(theDisp, dstbr->dirMB.win, dstbr->dirMB.x, dstbr->dirMB.y, - dstbr->dirMB.w+3, dstbr->dirMB.h+3, False); -@@ -2974,7 +3252,11 @@ - - - if (stat(bf->name, &st)==0) { -+#ifdef AUTO_EXPAND -+ bf->ftype = stat2bf((u_int) st.st_mode , bf->name); -+#else - bf->ftype = stat2bf((u_int) st.st_mode); -+#endif - if (bf->ftype == BF_FILE && (st.st_mode & 0111)) bf->ftype = BF_EXE; - - switch (bf->ftype) { -@@ -3006,6 +3288,7 @@ - case RFT_XBM: bf->ftype = BF_XBM; break; - case RFT_SUNRAS: bf->ftype = BF_SUNRAS; break; - case RFT_BMP: bf->ftype = BF_BMP; break; -+ case RFT_WBMP: bf->ftype = BF_BMP; break; - case RFT_UTAHRLE: bf->ftype = BF_UTAHRLE; break; - case RFT_IRIS: bf->ftype = BF_IRIS; break; - case RFT_PCX: bf->ftype = BF_PCX; break; -@@ -3013,12 +3296,22 @@ - case RFT_TIFF: bf->ftype = BF_TIFF; break; - case RFT_PDSVICAR: bf->ftype = BF_PDS; break; - case RFT_COMPRESS: bf->ftype = BF_COMPRESS; break; -+ case RFT_BZIP2: bf->ftype = BF_BZIP2; break; - case RFT_PS: bf->ftype = BF_PS; break; - case RFT_IFF: bf->ftype = BF_IFF; break; - case RFT_TARGA: bf->ftype = BF_TARGA; break; - case RFT_XPM: bf->ftype = BF_XPM; break; - case RFT_XWD: bf->ftype = BF_XWD; break; - case RFT_FITS: bf->ftype = BF_FITS; break; -+ case RFT_PNG: bf->ftype = BF_PNG; break; -+ case RFT_ZX: bf->ftype = BF_ZX; break; /* [JCE] */ -+ case RFT_PCD: bf->ftype = BF_PCD; break; -+ case RFT_MAG: bf->ftype = BF_MAG; break; -+ case RFT_MAKI: bf->ftype = BF_MAKI; break; -+ case RFT_PIC: bf->ftype = BF_PIC; break; -+ case RFT_PI: bf->ftype = BF_PI; break; -+ case RFT_PIC2: bf->ftype = BF_PIC2; break; -+ case RFT_MGCSFX: bf->ftype = BF_MGCSFX; break; - } - } - } -@@ -3405,7 +3698,7 @@ - double wexpand,hexpand; - int iwide, ihigh; - byte *icon24, *icon8; -- char str[256], str1[256], *readname, uncompname[128]; -+ char str[256], str1[256], readname[128], uncompname[128]; - char basefname[128], *uncName; - - -@@ -3414,7 +3707,7 @@ - basefname[0] = '\0'; - pinfo.pic = (byte *) NULL; - pinfo.comment = (char *) NULL; -- readname = bf->name; -+ strncpy(readname, bf->name, sizeof(readname) - 1); - - /* free any old info in 'bf' */ - if (bf->imginfo) free (bf->imginfo); -@@ -3431,7 +3724,7 @@ - - filetype = ReadFileType(bf->name); - -- if (filetype == RFT_COMPRESS) { -+ if ((filetype == RFT_COMPRESS) || (filetype == RFT_BZIP2)) { - #if (defined(VMS) && !defined(GUNZIP)) - /* VMS decompress doesn't like the file to have a trailing .Z in fname - however, GUnZip is OK with it, which we are calling UnCompress */ -@@ -3442,9 +3735,9 @@ - uncName = bf->name; - #endif - -- if (UncompressFile(uncName, uncompname)) { -+ if (UncompressFile(uncName, uncompname, filetype)) { - filetype = ReadFileType(uncompname); -- readname = uncompname; -+ strncpy(readname, uncompname, sizeof(readname) - 1); - } - else { - sprintf(str, "Couldn't uncompress file '%s'", bf->name); -@@ -3453,6 +3746,56 @@ - } - } - -+#ifdef MACBINARY -+ if (handlemacb && macb_file == True && bf->ftype != BF_ERROR) { -+ if (RemoveMacbinary(readname, uncompname)) { -+ if (strcmp(readname, bf->name)!=0) unlink(readname); -+ strncpy(readname, uncompname, sizeof(readname) - 1); -+ } -+ else { -+ sprintf(str, "Unable to remove a InfoFile header form '%s'.", bf->name); -+ setBrowStr(br, str); -+ bf->ftype = BF_ERROR; -+ } -+ } -+#endif -+ -+#ifdef HAVE_MGCSFX_AUTO -+ if (bf->ftype != BF_ERROR) { -+ if(filetype == RFT_MGCSFX){ -+ char tmpname[128]; -+ char *icom; -+ -+ if((icom = mgcsfx_auto_input_com(bf->name)) != NULL){ -+ sprintf(tmpname, "%s/xvmsautoXXXXXX", tmpdir); -+#ifdef USE_MKSTEMP -+ close(mkstemp(tmpname)); -+#else -+ mktemp(tmpname); -+#endif -+ SetISTR(ISTR_INFO, "Converting to known format by MgcSfx auto..."); -+ sprintf(str,"%s >%s", icom, tmpname); -+ }else goto ms_auto_no; -+ -+#ifndef VMS -+ if (system(str)) -+#else -+ if (!system(str)) -+#endif -+ { -+ sprintf(str, "Unable to convert '%s' by MgcSfx auto.", bf->name); -+ setBrowStr(br, str); -+ bf->ftype = BF_ERROR; -+ } else { -+ filetype = ReadFileType(tmpname); -+ if (strcmp(readname, bf->name)!=0) unlink(readname); -+ strncpy(readname, tmpname, sizeof(readname) - 1); -+ } -+ } -+ } -+ms_auto_no: -+#endif /* HAVE_MGCSFX_AUTO */ -+ - /* get rid of comments. don't need 'em */ - if (pinfo.comment) free(pinfo.comment); pinfo.comment = (char *) NULL; - -@@ -3470,6 +3813,9 @@ - else { - /* otherwise it's a known filetype... do the *hard* part now... */ - -+#ifdef VS_ADJUST -+ normaspect = defaspect; -+#endif - i = ReadPicFile(readname, filetype, &pinfo, 1); - KillPageFiles(pinfo.pagebname, pinfo.numpages); - -@@ -3489,7 +3835,7 @@ - } - - /* if we made an uncompressed file, we can rm it now */ -- if (readname != bf->name) unlink(readname); -+ if (strcmp(readname, bf->name)!=0) unlink(readname); - - - /* at this point either BF_ERROR, BF_UNKNOWN, BF_EXE or pic */ -@@ -3507,16 +3853,30 @@ - - /* compute size of icon (iwide,ihigh) */ - -+#ifdef VS_ADJUST -+ if (!vsadjust) normaspect = 1; -+ -+ wexpand = (double) (pinfo.w * normaspect) / (double) ISIZE_WIDE; -+#else - wexpand = (double) pinfo.w / (double) ISIZE_WIDE; -+#endif /* VS_ADJUST */ - hexpand = (double) pinfo.h / (double) ISIZE_HIGH; - - if (wexpand >= 1.0 || hexpand >= 1.0) { /* don't expand small icons */ - if (wexpand>hexpand) { -+#ifdef VS_ADJUST -+ iwide = (int) ((pinfo.w * normaspect) / wexpand + 0.5); -+#else - iwide = (int) (pinfo.w / wexpand + 0.5); -+#endif - ihigh = (int) (pinfo.h / wexpand + 0.5); - } - else { -+#ifdef VS_ADJUST -+ iwide = (int) ((pinfo.w * normaspect) / hexpand + 0.5); -+#else - iwide = (int) (pinfo.w / hexpand + 0.5); -+#endif - ihigh = (int) (pinfo.h / hexpand + 0.5); - } - } -@@ -3566,6 +3926,15 @@ - case RFT_XPM: strcat(str,"XPM file"); break; - case RFT_XWD: strcat(str,"XWD file"); break; - case RFT_FITS: strcat(str,"FITS file"); break; -+ case RFT_PNG: strcat(str,"PNG file"); break; -+ case RFT_ZX: strcat(str,"Spectrum SCREEN$"); break; /* [JCE] */ -+ case RFT_PCD: strcat(str,"PhotoCD file"); break; -+ case RFT_MAG: strcat(str,"MAG file"); break; -+ case RFT_MAKI: strcat(str,"MAKI file"); break; -+ case RFT_PIC: strcat(str,"PIC file"); break; -+ case RFT_PI: strcat(str,"PI file"); break; -+ case RFT_PIC2: strcat(str,"PIC2 file"); break; -+ case RFT_MGCSFX: strcat(str,"Magic Suffix file"); break; - default: strcat(str,"file of unknown type"); break; - } - -@@ -3669,6 +4038,10 @@ - - sprintf(thFname, "%s%s/%s", br->path, THUMBDIR, bf->name); - -+#ifdef AUTO_EXPAND -+ Dirtovd(thFname); -+#endif -+ - fp = fopen(thFname, "r"); - if (!fp) return; /* nope, it doesn't have one */ - -@@ -3784,6 +4157,11 @@ - - sprintf(thFname, "%s%s/%s", br->path, THUMBDIR, bf->name); - -+#ifdef AUTO_EXPAND -+ Dirtovd(thFname); -+#endif -+ -+ unlink(thFname); /* just in case there's already an unwritable one */ - fp = fopen(thFname, "w"); - if (!fp) { - sprintf(buf, "Can't create thumbnail file '%s': %s", thFname, -@@ -3848,15 +4226,30 @@ - - sprintf(thFname, "%s%s", br->path, THUMBDIRNAME); - -+#ifdef AUTO_EXPAND -+ Dirtovd(thFname); -+#endif -+ - i = stat(thFname, &st); - if (i) { /* failed, let's create it */ - sprintf(thFname, "%s.", br->path); -+#ifdef AUTO_EXPAND -+ Dirtovd(thFname); -+#endif - i = stat(thFname, &st); /* get permissions of parent dir */ - if (!i) perm = st.st_mode & 07777; - else perm = 0755; - - sprintf(thFname, "%s%s", br->path, THUMBDIRNAME); -+#ifdef AUTO_EXPAND -+ Dirtovd(thFname); -+# ifdef VIRTUAL_TD -+ if (mkdir(thFname, (mode_t) perm) < 0) -+ Mkvdir_force(thFname); -+# else - mkdir(thFname, (mode_t) perm); -+# endif -+#endif - } - } - -@@ -3898,7 +4291,7 @@ - for (i=0, bf=br->bfList; i<br->bfLen; i++, bf++) { - if (bf->ftype <= BF_FILE || bf->ftype >= BF_ERROR || bf->ftype==BF_EXE) { - -- /* ie, not a 'special' file */ -+ /* i.e., not a 'special' file */ - - int s1, s2; - char thfname[256]; -@@ -3912,10 +4305,9 @@ - sprintf(thfname, "%s/%s", THUMBDIR, bf->name); - s2 = stat(thfname, &thumbst); - -- if (s1 || s2 || filest.st_mtime > thumbst.st_mtime || -- filest.st_ctime > thumbst.st_ctime) { -+ if (s1 || s2 || filest.st_mtime > thumbst.st_mtime) { - /* either stat'ing the file or the thumbfile failed, or -- both stat's succeeded and the file has a newer mod or creation -+ both stat's succeeded and the file has a newer mod - time than the thumbnail file */ - - makeIconVisible(br, i); -@@ -3927,8 +4319,12 @@ - iconsBuilt++; - if (DEBUG) - fprintf(stderr,"icon made:fname='%s' thfname='%s' %d,%d,%ld,%ld\n", -- bf->name, thfname, s1,s2,filest.st_mtime,thumbst.st_mtime); -+ bf->name, thfname, s1, s2, -+ (long)filest.st_mtime, (long)thumbst.st_mtime); - } -+ } else if (filest.st_ctime > thumbst.st_ctime) { -+ /* update protections */ -+ chmod(thfname, (mode_t) (filest.st_mode & 07777)); - } - } - statcount++; -@@ -3963,7 +4359,11 @@ - sprintf(thfname, "%s/%s", THUMBDIR, dp->d_name); - if (stat(thfname, &thumbst)==0) { /* success */ - int tmp; -+#ifdef AUTO_EXPAND -+ tmp = stat2bf((u_int) thumbst.st_mode , thfname); -+#else - tmp = stat2bf((u_int) thumbst.st_mode); -+#endif - - if (tmp == BF_FILE) { /* a plain file */ - /* see if this thumbfile has an associated pic file */ -@@ -4042,6 +4442,15 @@ - static char *labels[] = { "\nOk", "\033Cancel" }; - struct stat st; - -+#ifdef AUTO_EXPAND -+ if (Isvdir(br->path)) { -+ sprintf(buf,"Sorry, you can't rename file in the virtual directory, '%s'", -+ br->path); -+ ErrPopUp(buf, "\nBummer!"); -+ return; -+ } -+#endif -+ - if (cdBrow(br)) return; - - /* find the selected file */ -@@ -4129,6 +4538,15 @@ - static char *labels[] = { "\nOk", "\033Cancel" }; - struct stat st; - -+#ifdef AUTO_EXPAND -+ if (Isvdir(br->path)) { -+ sprintf(buf,"Sorry, you can't mkdir in the virtual directory, '%s'", -+ br->path); -+ ErrPopUp(buf, "\nBummer!"); -+ return; -+ } -+#endif -+ - if (cdBrow(br)) return; - - buf[0] = '\0'; -@@ -4197,14 +4615,34 @@ - if (cdBrow(br)) return; /* prints its own error message */ - } - -+#ifdef AUTO_EXPAND -+ if (Chvdir(buf)) { -+#else - if (chdir(buf)) { -+#endif - sprintf(str,"Unable to cd to '%s'\n", buf); - setBrowStr(br, str); - XBell(theDisp, 50); - } - else { -+#ifdef AUTO_EXPAND -+ if (Isvdir(buf)) { -+ BTSetActive(&br->but[BR_DELETE], 0); -+ br->cmdMB.dim[BR_DELETE] = 1; -+ -+ BTSetActive(&br->but[BR_RENAME], 0); -+ br->cmdMB.dim[BR_RENAME] = 1; -+ -+ BTSetActive(&br->but[BR_MKDIR], 0); -+ br->cmdMB.dim[BR_MKDIR] = 1; -+ } else { -+ BTSetActive(&br->but[BR_MKDIR], 1); -+ br->cmdMB.dim[BR_MKDIR] = 0; -+ } -+#endif - scanDir(br); - SCSetVal(&(br->scrl), 0); /* reset to top on a chdir */ -+ restIconVisible(br); - } - } - -@@ -4229,6 +4667,15 @@ - char buf[512]; - static char *yesno[] = { "\004Delete", "\033Cancel" }; - -+#ifdef AUTO_EXPAND -+ if (Isvdir(br->path)) { -+ sprintf(buf,"Sorry, you can't delete file at the virtual directory, '%s'", -+ br->path); -+ ErrPopUp(buf, "\nBummer!"); -+ return; -+ } -+#endif -+ - if (!br->bfLen || !br->bfList || !br->numlit) return; - - if (cdBrow(br)) return; /* can't cd to this directory. screw it! */ -@@ -4251,7 +4698,11 @@ - for (i=0, bf=br->bfList; i<br->bfLen; i++,bf++) { - if (bf->lit) { - if (firstdel == -1) firstdel = i; -- if (bf->ftype == BF_DIR) numdirs++; -+ if (bf->ftype == BF_DIR -+#ifdef AUTO_EXPAND -+ && (!Isarchive(bf->name)) -+#endif -+ ) numdirs++; - else numfiles++; - } - } -@@ -4265,7 +4716,12 @@ - slen = strlen(buf); - - for (i=0, bf=br->bfList; i<br->bfLen; i++,bf++) { -+#ifdef AUTO_EXPAND -+ if (bf->lit && (bf->ftype != BF_DIR || Isarchive(bf->name))) { -+#else - if (bf->lit && bf->ftype != BF_DIR) { -+#endif -+ - if ( (slen + strlen(bf->name) + 1) > 256) { - strcat(buf,"..."); - break; -@@ -4277,7 +4733,7 @@ - } - } - -- i = PopUp(buf, yesno, 2); -+ i = PopUp(buf, yesno, COUNT(yesno)); - if (i) return; /* cancelled */ - } - -@@ -4290,7 +4746,11 @@ - slen = strlen(buf); - - for (i=0, bf=br->bfList; i<br->bfLen; i++,bf++) { -+#ifdef AUTO_EXPAND -+ if (bf->lit && (bf->ftype == BF_DIR || !Isarchive(bf->name))) { -+#else - if (bf->lit && bf->ftype == BF_DIR) { -+#endif - if ( (slen + strlen(bf->name) + 1) > 256) { - strcat(buf,"..."); - break; -@@ -4302,7 +4762,7 @@ - } - } - -- i = PopUp(buf, yesno, 2); -+ i = PopUp(buf, yesno, COUNT(yesno)); - if (i) return; /* cancelled */ - } - -@@ -4311,7 +4771,11 @@ - - for (i=0, bf=br->bfList; i<br->bfLen; i++,bf++) { - if (bf->lit) { -- if (bf->ftype == BF_DIR) rm_dir (br, bf->name); -+ if (bf->ftype == BF_DIR -+#ifdef AUTO_EXPAND -+ && !Isarchive(bf->name) -+#endif -+ ) rm_dir (br, bf->name); - else rm_file(br, bf->name); - } - } -@@ -4440,7 +4904,11 @@ - xv_getwd(orgDir, sizeof(orgDir)); - - sprintf(curDir, "%s%s", br->path, subdir); -+#ifdef AUTO_EXPAND -+ if (Chvdir(curDir)) { -+#else - if (chdir(curDir)) { -+#endif - char str[512]; - sprintf(str, "Unable to cd to '%s'\n", curDir); - setBrowStr(br, str); -@@ -4452,14 +4920,24 @@ - /* have we looped? */ - for (i=0; i<dirStackLen && strcmp(curDir, dirStack[i]); i++); - if (i<dirStackLen) { /* YES */ -+#ifdef AUTO_EXPAND -+ Chvdir(orgDir); -+#else - chdir(orgDir); -+#endif -+ restIconVisible(br); - return; - } - - sp = (char *) malloc((size_t) strlen(curDir) + 1); - if (!sp) { - setBrowStr(br, "malloc() error in recurseUpdate()\n"); -+#ifdef AUTO_EXPAND -+ Chvdir(orgDir); -+#else - chdir(orgDir); -+#endif -+ restIconVisible(br); - return; - } - -@@ -4494,7 +4972,12 @@ - - xv_getwd(curDir, sizeof(curDir)); - if (strcmp(orgDir, curDir)) { /* change back to orgdir */ -+#ifdef AUTO_EXPAND -+ Chvdir(orgDir); -+#else - chdir(orgDir); -+#endif -+ restIconVisible(br); - scanDir(br); - } - } -@@ -4518,6 +5001,13 @@ - setBrowStr(br, buf); - } - -+#ifdef AUTO_EXPAND -+ if (Rmvdir(name)) { -+ sprintf(buf, "fail to remove virturl directory: %s", name); -+ setBrowStr(br, buf); -+ } -+#endif -+ - /* try to delete a thumbnail file, as well. ignore errors */ - strcpy(buf1, name); /* tmp1 = leading path of name */ - tmp = (char *) rindex(buf1, '/'); -@@ -4586,7 +5076,14 @@ - goto done; - } - -- if (stat2bf((u_int) st.st_mode) == BF_DIR) { /* skip, for now */ -+#ifdef AUTO_EXPAND -+ if ((stat2bf((u_int) st.st_mode , rmdirPath) == BF_DIR) -+ && !Isarchive(rmdirPath)) /* skip, for now */ -+#else -+ -+ if (stat2bf((u_int) st.st_mode) == BF_DIR) /* skip, for now */ -+#endif -+ { - rmdirPath[oldpathlen] = '\0'; - continue; /* don't remove from list */ - } -@@ -4639,9 +5136,9 @@ - - static int overwrite; - #define OWRT_ASK 0 --#define OWRT_NOASK 1 --#define OWRT_CANCEL 2 -- -+#define OWRT_ALWAYS 1 -+#define OWRT_NEVER 2 -+#define OWRT_CANCEL 3 - - /*******************************************/ - static void dragFiles(srcBr, dstBr, srcpath, dstpath, dstdir, -@@ -4676,11 +5173,26 @@ - } - else if (strcmp(dstdir,".")!=0) sprintf(dstp, "%s%s/", dstpath, dstdir); - -+#ifdef AUTO_EXPAND -+ if (Isvdir(dstp)) { -+ sprintf(buf,"Sorry, you can't %s to the virtual directory, '%s'", -+ cpymode ? "copy" : "move", dstp); -+ ErrPopUp(buf, "\nBummer!"); -+ SetCursors(-1); -+ return; -+ } -+ if (Isvdir(srcpath)) -+ cpymode = 1; -+#endif -+ - - - /* if there is a thumbnail directory in 'srcpath', make one for dstpath */ - sprintf(src,"%s%s", srcpath, THUMBDIR); - dothumbs = 0; -+#ifdef AUTO_EXPAND -+ Dirtovd(src); -+#endif - if (stat(src, &st)==0) { - sprintf(dst,"%s%s", dstp, THUMBDIR); - mkdir(dst, st.st_mode & 07777); -@@ -4711,6 +5223,14 @@ - if (overwrite == OWRT_CANCEL) break; /* abort move */ - if (j==1) fail++; - -+#ifdef AUTO_EXPAND -+ if (!cpymode && j==0) -+ if (Movevdir(src,dst)) { -+ sprintf(buf, "fail to move virturl directory: %s", names[i]); -+ setBrowStr(srcBr, buf); -+ } -+#endif -+ - if (dothumbs && j==0) { - sprintf(src,"%s%s/%s", srcpath, THUMBDIR, names[i]); - sprintf(dst,"%s%s/%s", dstp, THUMBDIR, names[i]); -@@ -4748,6 +5268,15 @@ - } - - -+ if (!cpymode) { -+ /* clear all lit files in the source folder (as they've been moved) -+ note: this won't be the optimal behavior if any files failed to -+ move, but screw it, that's not going to happen too often... */ -+ for (i=0; i<srcBr->bfLen; i++) srcBr->bfList[i].lit = 0; -+ srcBr->numlit = 0; -+ } -+ -+ - /* clear all files in the destination folder */ - for (i=0; i<dstBr->bfLen; i++) { - dstBr->bfList[i].lit = 0; -@@ -4793,7 +5322,51 @@ - SetCursors(-1); - } - -+static int recursive_remove(dir) -+ char *dir; -+{ -+ DIR *dp = NULL; -+ struct dirent *di; -+ char name[MAXPATHLEN+1]; -+ -+ strncpy(name, dir, MAXPATHLEN); -+ name[MAXPATHLEN] = 0; -+ -+ if (name[strlen(name) - 1] == '/') -+ name[strlen(name) - 1] = 0; - -+ if ((dp = opendir(name)) == NULL) -+ goto err; -+ -+ while ((di = readdir(dp)) != NULL) { -+ char buf[MAXPATHLEN+1]; -+ struct stat st; -+ -+ if (!strcmp(di->d_name, ".") || !strcmp(di->d_name, "..")) -+ continue; -+ -+ snprintf(buf, MAXPATHLEN, "%s/%s", name, di->d_name); -+ -+ if (stat(buf, &st) < 0) -+ continue; -+ -+ if (S_ISDIR(st.st_mode)) { -+ if (recursive_remove(buf) < 0) -+ goto err; -+ } else -+ unlink(buf); -+ } -+ -+ if (rmdir(name) < 0) -+ goto err; -+ -+ closedir(dp); -+ return 0; -+ -+err: -+ if (dp) closedir(dp); -+ return -1; -+} - - /*************************************************/ - static int moveFile(src,dst) -@@ -4811,31 +5384,45 @@ - int i, srcdir, dstdir; - struct stat st; - char buf[512]; -- static char *owbuts[4] = { "\nOk", "dDon't ask", "nNo", "\033Cancel" }; -+ static char *owbuts[] = { "\nOk", "aAlways", "nNo", "NNever", "\033Cancel" }; - - if (DEBUG) fprintf(stderr,"moveFile %s %s\n", src, dst); - -+#ifdef AUTO_EXPAND -+ Dirtosubst(src); -+#endif -+ - if (stat(src, &st)) return 0; /* src doesn't exist, it would seem */ -+#ifdef AUTO_EXPAND -+ srcdir = (stat2bf((u_int) st.st_mode , src) == BF_DIR); -+#else - srcdir = (stat2bf((u_int) st.st_mode) == BF_DIR); -+#endif - - /* see if destination exists */ -+ - if (stat(dst, &st)==0) { -+ if (overwrite==OWRT_NEVER) return -1; -+#ifdef AUTO_EXPAND -+ dstdir = (stat2bf((u_int) st.st_mode , dst) == BF_DIR); -+#else - dstdir = (stat2bf((u_int) st.st_mode) == BF_DIR); -+#endif - - if (overwrite==OWRT_ASK) { -- sprintf(buf, "%s '%s' exists.\n\nOverwrite?", -+ snprintf(buf, sizeof(buf), "%s '%s' exists.\n\nOverwrite?", - dstdir ? "Directory" : "File", dst); -- i = PopUp(buf, owbuts, 4); -- -- if (i==1) overwrite = OWRT_NOASK; -- else if (i==2) return -1; -- else if (i==3) { overwrite = OWRT_CANCEL; return 1; } -+ switch (PopUp(buf, owbuts, COUNT(owbuts))) { -+ case 1: overwrite = OWRT_ALWAYS; break; -+ case 2: return -1; -+ case 3: overwrite = OWRT_NEVER; return -1; -+ case 4: overwrite = OWRT_CANCEL; return 1; -+ } - } - - if (dstdir) { - #ifndef VMS /* we don't delete directories in VMS */ -- sprintf(buf, "rm -rf %s", dst); -- if (system(buf)) { /* okay, so it's cheating... */ -+ if (recursive_remove(dst)) { /* okay, so it's cheating... */ - SetISTR(ISTR_WARNING, "Unable to remove directory %s", dst); - return 1; - } -@@ -4858,9 +5445,8 @@ - if (i == 0) { /* copied okay, kill the original */ - if (srcdir) { - #ifndef VMS /* we don't delete directories in VMS */ -- sprintf(buf, "rm -rf %s", src); -- if (system(buf)) { /* okay, so it's cheating... */ -- SetISTR(ISTR_WARNING, "Unable to remove directory %s", dst); -+ if (recursive_remove(src)) { /* okay, so it's cheating... */ -+ SetISTR(ISTR_WARNING, "Unable to remove directory %s", src); - return 1; - } - #endif /* VMS */ -@@ -4906,38 +5492,51 @@ - fall through: if dest doesn't exist, copy the directory, recurs */ - - -- int i, dstExists, srcdir, dstdir; -+ int dstExists, srcdir, dstdir; - struct stat srcSt, dstSt; - char buf[1024]; -- static char *owdiff[3] = { "\nOk", "nNo", "\033Cancel" }; -- static char *owsame[4] = { "\nOk", "dDon't Ask", "nNo", "\033Cancel" }; -+ static char *owdiff[] = { "\nOk", "nNo", "\033Cancel" }; -+ static char *owsame[] = { "\nOk", "aAlways", "nNo", "NNever", "\033Cancel" }; - - if (DEBUG) fprintf(stderr,"copyFile %s %s\n", src, dst); - -+#ifdef AUTO_EXPAND -+ Dirtosubst(src); -+#endif -+ - if (stat(src,&srcSt)) return 0; /* source doesn't exist, it would seem */ - - dstExists = (stat(dst, &dstSt)==0); - - if (dstExists) { /* ask about overwriting... */ -- srcdir = (stat2bf((u_int) srcSt.st_mode) == BF_DIR); -- dstdir = (stat2bf((u_int) dstSt.st_mode) == BF_DIR); -+#ifdef AUTO_EXPAND -+ srcdir = (stat2bf((u_int) srcSt.st_mode , src) == BF_DIR); -+ dstdir = (stat2bf((u_int) dstSt.st_mode , dst) == BF_DIR); -+#else -+ srcdir = (stat2bf((u_int) srcSt.st_mode) == BF_DIR); -+ dstdir = (stat2bf((u_int) dstSt.st_mode) == BF_DIR); -+#endif - - sprintf(buf, "%s '%s' already exists. Replace it with %s '%s'?", - (dstdir) ? "Directory" : "File", dst, - (srcdir) ? "contents of directory" : "file", src); - - if (srcdir == dstdir) { -+ if (overwrite==OWRT_NEVER) return -1; - if (overwrite==OWRT_ASK) { -- i = PopUp(buf, owsame, 4); -- if (i==1) overwrite = OWRT_NOASK; -- if (i==2) return -1; -- else if (i==3) { overwrite = OWRT_CANCEL; return 1; } -+ switch (PopUp(buf, owsame, COUNT(owsame))) { -+ case 1: overwrite = OWRT_ALWAYS; break; -+ case 2: return -1; -+ case 3: overwrite = OWRT_NEVER; return -1; -+ case 4: overwrite = OWRT_CANCEL; return 1; -+ } - } - } - else { /* one's a dir, the other's a file. *ALWAYS* ask! */ -- i = PopUp(buf, owdiff, 3); -- if (i==1) return -1; -- else if (i==2) { overwrite = OWRT_CANCEL; return 1; } -+ switch (PopUp(buf, owdiff, COUNT(owdiff))) { -+ case 1: return -1; -+ case 2: overwrite = OWRT_CANCEL; return 1; -+ } - } - - -@@ -5035,8 +5634,11 @@ - havedst = 1; - } - -- -+#ifdef AUTO_EXPAND -+ switch(stat2bf((u_int) srcSt.st_mode , cpDstPath)) { -+#else - switch(stat2bf((u_int) srcSt.st_mode)) { -+#endif - /* determine how to copy, by filetype */ - - /* NOTE: There is no S_IFLNK case here, since we're using 'stat()' and -@@ -5052,7 +5654,11 @@ - } - } - else { -+#ifdef AUTO_EXPAND -+ if (stat2bf((u_int) dstSt.st_mode , cpDstPath) != BF_DIR) { -+#else - if (stat2bf((u_int) dstSt.st_mode) != BF_DIR) { -+#endif - SetISTR(ISTR_WARNING,"%s: not a directory", cpDstPath); - copyerr++; - return; -@@ -5130,7 +5736,12 @@ - goto done; - } - -- if (stat2bf((u_int) srcSt.st_mode) == BF_DIR) { -+#ifdef AUTO_EXPAND -+ if (stat2bf((u_int) srcSt.st_mode , cpSrcPath) == BF_DIR) -+#else -+ if (stat2bf((u_int) srcSt.st_mode) == BF_DIR) -+#endif -+ { - cpSrcPath[oldsrclen] = '\0'; - continue; /* don't remove from list, just skip */ - } -@@ -5189,9 +5800,9 @@ - int exists; - /*****************************/ - { -- register int srcFd, dstFd, rcount, wcount, i; -+ register int srcFd, dstFd, rcount, wcount; - char buf[8192]; -- static char *owbuts[4] = { "\nOk", "dDon't Ask", "nNo", "\033Cancel" }; -+ static char *owbuts[] = { "\nOk", "aAlways", "nNo", "NNever", "\033Cancel" }; - - if (DEBUG) fprintf(stderr,"cp_file: src='%s', dst='%s'\n", - cpSrcPath, cpDstPath); -@@ -5203,13 +5814,15 @@ - } - - if (exists) { -+ if (overwrite==OWRT_NEVER) return; - if (overwrite==OWRT_ASK) { - sprintf(buf, "File '%s' exists.\n\nOverwrite?", cpDstPath); -- i = PopUp(buf, owbuts, 4); -- -- if (i==1) overwrite = OWRT_NOASK; -- else if (i==2) return; -- else if (i==3) { overwrite = OWRT_CANCEL; return; } -+ switch (PopUp(buf, owbuts, 4)) { -+ case 1: overwrite = OWRT_ALWAYS; break; -+ case 2: return; -+ case 3: overwrite = OWRT_NEVER; return; -+ case 4: overwrite = OWRT_CANCEL; return; -+ } - } - dstFd = open(cpDstPath, O_WRONLY|O_TRUNC, 0); - } -@@ -5303,8 +5916,14 @@ - - - /*********************************/ -+#ifdef AUTO_EXPAND -+static int stat2bf(uistmode, path) -+ u_int uistmode; -+ char *path; -+#else - static int stat2bf(uistmode) - u_int uistmode; -+#endif - { - /* given the 'st.st_mode' field from a successful stat(), returns - BF_FILE, BF_DIR, BF_BLK, BF_CHR, BF_FIFO, or BF_SOCK. Does *NOT* -@@ -5318,6 +5937,9 @@ - else if (S_ISBLK(stmode)) rv = BF_BLK; - else if (S_ISFIFO(stmode)) rv = BF_FIFO; - else if (S_ISSOCK(stmode)) rv = BF_SOCK; -+#ifdef AUTO_EXPAND -+ else if (Isarchive(path)) rv = BF_DIR; -+#endif - else rv = BF_FILE; - - return rv; -@@ -5418,4 +6040,56 @@ - } - - -+static IVIS *icon_vis_list = NULL; -+ -+/***************************************************************/ -+static void recIconVisible(name, icon) -+ char *name; -+ int icon; -+{ -+ IVIS *ptr, *prev = NULL; -+ -+ for (ptr = icon_vis_list; ptr; prev = ptr, ptr = ptr->next) { -+ if (!strcmp(ptr->name, name)) { -+ ptr->icon = icon; -+ return; -+ } -+ } -+ -+ ptr = calloc(sizeof(IVIS), 1); -+ if (!ptr) -+ return; -+ -+ ptr->name = strdup(name); - -+ if (!ptr->name) { -+ free(ptr); -+ return; -+ } -+ -+ if (!prev) { -+ icon_vis_list = ptr; -+ } else { -+ prev->next = ptr; -+ } -+ -+ ptr->next = NULL; -+ ptr->icon = icon; -+} -+ -+/***************************************************************/ -+static void restIconVisible(br) -+ BROWINFO *br; -+{ -+ IVIS *ptr; -+ -+ for (ptr = icon_vis_list; ptr; ptr = ptr->next) { -+ if (!strcmp(ptr->name, br->path)) { -+ if (ptr->icon >= 0) { -+ makeIconVisible(br, ptr->icon); -+ updateSel(br, ptr->icon, 0, 0); -+ } -+ return; -+ } -+ } -+} -diff -ruN xv-3.10a-bugfixes/xvctrl.c xv-3.10a-enhancements/xvctrl.c ---- xv-3.10a-bugfixes/xvctrl.c 2004-05-23 11:56:37.000000000 -0700 -+++ xv-3.10a-enhancements/xvctrl.c 2004-05-23 12:15:18.000000000 -0700 -@@ -104,7 +104,8 @@ - "Root: centered, warp", - "Root: centered, brick", - "Root: symmetrical tiled", -- "Root: symmetrical mirrored" }; -+ "Root: symmetrical mirrored", -+ "Root: upper left corner" }; - - static char *conv24MList[] = { "8-bit mode\t\2448", - "24-bit mode\t\2448", -diff -ruN xv-3.10a-bugfixes/xvdial.c xv-3.10a-enhancements/xvdial.c ---- xv-3.10a-bugfixes/xvdial.c 2004-05-16 18:01:57.000000000 -0700 -+++ xv-3.10a-enhancements/xvdial.c 2004-05-16 18:06:38.000000000 -0700 -@@ -41,20 +41,21 @@ - - - /* local functions */ --static int whereInDial PARM((DIAL *, int, int)); --static void drawArrow PARM((DIAL *)); --static void drawValStr PARM((DIAL *)); --static void drawButt PARM((DIAL *, int, int)); --static int computeDialVal PARM((DIAL *, int, int)); --static void dimDial PARM((DIAL *)); -+static int whereInDial PARM((DIAL *, int, int)); -+static void drawArrow PARM((DIAL *)); -+static void drawValStr PARM((DIAL *)); -+static void drawButt PARM((DIAL *, int, int)); -+static double computeDialVal PARM((DIAL *, int, int)); -+static void dimDial PARM((DIAL *)); - - - /***************************************************/ --void DCreate(dp, parent, x, y, w, h, minv, maxv, curv, page, -+void DCreate(dp, parent, x, y, w, h, minv, maxv, curv, inc, page, - fg, bg, hi, lo, title, units) - DIAL *dp; - Window parent; --int x,y,w,h,minv,maxv,curv,page; -+int x,y,w,h; -+double minv,maxv,curv,inc,page; - unsigned long fg,bg,hi,lo; - char *title, *units; - { -@@ -98,18 +99,18 @@ - 1,fg,bg); - if (!dp->win) FatalError("can't create dial window"); - -- DSetRange(dp, minv, maxv, curv, page); -+ DSetRange(dp, minv, maxv, curv, inc, page); - XSelectInput(theDisp, dp->win, ExposureMask | ButtonPressMask); - } - - - /***************************************************/ --void DSetRange(dp, minv, maxv, curv, page) --DIAL *dp; --int minv, maxv, curv, page; -+void DSetRange(dp, minv, maxv, curv, inc, page) -+DIAL *dp; -+double minv, maxv, curv, inc, page; - { - if (maxv<minv) maxv=minv; -- dp->min = minv; dp->max = maxv; dp->page = page; -+ dp->min = minv; dp->max = maxv; dp->inc = inc; dp->page = page; - dp->active = (minv < maxv); - - DSetVal(dp, curv); -@@ -118,8 +119,8 @@ - - /***************************************************/ - void DSetVal(dp, curv) --DIAL *dp; --int curv; -+DIAL *dp; -+double curv; - { - RANGE(curv, dp->min, dp->max); /* make sure curv is in-range */ - -@@ -129,7 +130,7 @@ - XSetForeground(theDisp, theGC, dp->bg); - drawArrow(dp); - -- dp->val = curv; -+ dp->val = (double)((int)(curv / dp->inc + (curv > 0 ? 0.5 : -0.5))) * dp->inc; - - /* draw new arrow and string */ - XSetForeground(theDisp, theGC, dp->fg); -@@ -202,7 +203,8 @@ - int mx,my; - { - Window rW,cW; -- int rx,ry, x,y, ipos, pos, lit, i, origval; -+ int rx, ry, x, y, ipos, pos, lit; -+ double origval; - unsigned int mask; - - lit = 0; -@@ -224,9 +226,9 @@ - if (ipos != INDIAL) { - drawButt(dp, ipos, 1); - switch (ipos) { -- case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+1); break; -+ case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+dp->inc); break; - case INCW2: if (dp->val < dp->max) DSetVal(dp, dp->val+dp->page); break; -- case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-1); break; -+ case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-dp->inc); break; - case INCCW2: if (dp->val > dp->min) DSetVal(dp, dp->val-dp->page); break; - } - if (dp->drawobj != NULL) (dp->drawobj)(); -@@ -235,8 +237,9 @@ - } - - else { -- i = computeDialVal(dp, mx, my); -- DSetVal(dp, i); -+ double v; -+ v = computeDialVal(dp, mx, my); -+ DSetVal(dp, v); - if (dp->drawobj != NULL) (dp->drawobj)(); - } - -@@ -246,11 +249,11 @@ - if (!(mask & Button1Mask)) break; /* button released */ - - if (ipos == INDIAL) { -- int j; -- i = computeDialVal(dp, x, y); -- j = dp->val; -- DSetVal(dp, i); -- if (j != dp->val) { -+ double v, w; -+ v = computeDialVal(dp, x, y); -+ w = dp->val; -+ DSetVal(dp, v); -+ if (w != dp->val) { - /* track whatever dial controls */ - if (dp->drawobj != NULL) (dp->drawobj)(); - } -@@ -266,11 +269,11 @@ - - if (lit) { - switch (ipos) { -- case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+1); -+ case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+dp->inc); - break; - case INCW2: if (dp->val < dp->max) DSetVal(dp, dp->val+dp->page); - break; -- case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-1); -+ case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-dp->inc); - break; - case INCCW2: if (dp->val > dp->min) DSetVal(dp, dp->val-dp->page); - break; -@@ -320,19 +323,20 @@ - static void drawArrow(dp) - DIAL *dp; - { -- int i, rad, cx, cy; -+ int rad, cx, cy; -+ double v; - XPoint arrow[4]; - - rad = dp->rad; cx = dp->cx; cy = dp->cy; - - /* map pos (range minv..maxv) into degrees (range 240..-60) */ -- i = 240 + (-300 * (dp->val - dp->min)) / (dp->max - dp->min); -- arrow[0].x = cx + (int) ((double) rad * .80 * cos(i * DEG2RAD)); -- arrow[0].y = cy - (int) ((double) rad * .80 * sin(i * DEG2RAD)); -- arrow[1].x = cx + (int) ((double) rad * .33 * cos((i+160) * DEG2RAD)); -- arrow[1].y = cy - (int) ((double) rad * .33 * sin((i+160) * DEG2RAD)); -- arrow[2].x = cx + (int) ((double) rad * .33 * cos((i-160) * DEG2RAD)); -- arrow[2].y = cy - (int) ((double) rad * .33 * sin((i-160) * DEG2RAD)); -+ v = 240 + (-300 * (dp->val - dp->min)) / (dp->max - dp->min); -+ arrow[0].x = cx + (int) ((double) rad * .80 * cos(v * DEG2RAD)); -+ arrow[0].y = cy - (int) ((double) rad * .80 * sin(v * DEG2RAD)); -+ arrow[1].x = cx + (int) ((double) rad * .33 * cos((v+160) * DEG2RAD)); -+ arrow[1].y = cy - (int) ((double) rad * .33 * sin((v+160) * DEG2RAD)); -+ arrow[2].x = cx + (int) ((double) rad * .33 * cos((v-160) * DEG2RAD)); -+ arrow[2].y = cy - (int) ((double) rad * .33 * sin((v-160) * DEG2RAD)); - arrow[3].x = arrow[0].x; - arrow[3].y = arrow[0].y; - XDrawLines(theDisp, dp->win, theGC, arrow, 4, CoordModeOrigin); -@@ -343,23 +347,37 @@ - static void drawValStr(dp) - DIAL *dp; - { -- int i, x1, x2; -+ int tot, i, x1, x2; - char foo[60], foo1[60]; - - /* compute longest string necessary so we can right-align this thing */ -- sprintf(foo,"%d",dp->min); x1 = strlen(foo); -- sprintf(foo,"%d",dp->max); x2 = strlen(foo); -+ sprintf(foo,"%d",(int)dp->min); x1 = strlen(foo); -+ sprintf(foo,"%d",(int)dp->max); x2 = strlen(foo); - if (dp->min < 0 && dp->max > 0) x2++; /* put '+' at beginning */ - i = x1; if (x2>x1) i = x2; - if (dp->units) i += strlen(dp->units); - -- if (dp->min < 0 && dp->max > 0) sprintf(foo,"%+d", dp->val); -- else sprintf(foo,"%d", dp->val); -+ sprintf(foo,"%g",dp->inc); /* space for decimal values */ -+ tot = i + strlen(foo) - 1; /* Take away the 0 from the beginning */ -+ -+ if (dp->min < 0.0 && dp->max > 0.0) sprintf(foo,"%+g", dp->val); -+ else sprintf(foo,"%g", dp->val); -+ -+ if (dp->inc < 1.0) -+ { -+ int j; -+ -+ if (dp->val == (double)((int)dp->val)) -+ strcat(foo,"."); -+ -+ for (j = strlen(foo); j < tot; j++) -+ strcat(foo,"0"); -+ } - - if (dp->units) strcat(foo,dp->units); - foo1[0] = '\0'; - if (strlen(foo) < (size_t) i) { -- for (i = i - strlen(foo); i>0; i--) strcat(foo1," "); -+ for (i-=strlen(foo);i>0;i--) strcat(foo1," "); - } - strcat(foo1, foo); - -@@ -411,12 +429,13 @@ - - - /***************************************************/ --static int computeDialVal(dp, x, y) -+static double computeDialVal(dp, x, y) - DIAL *dp; - int x, y; - { -- int dx, dy, val; -- double angle; -+ int dx, dy; -+ -+ double angle, val; - - /* compute dx, dy (distance from cx, cy). Note: +dy is *up* */ - dx = x - dp->cx; dy = dp->cy - y; -@@ -436,8 +455,10 @@ - if (angle > 270.0) angle -= 360.0; - if (angle < -90.0) angle += 360.0; - -- val = (int) ((dp->max - dp->min) * (240.0 - angle) / 300.0) + dp->min; -+ val = ((dp->max - dp->min) * (240.0 - angle) / 300.0) + dp->min; - -+ /* round value to be an even multiple of dp->inc */ -+ val = (double)((int)(val / dp->inc + 0.5)) * dp->inc; - return val; - } - -diff -ruN xv-3.10a-bugfixes/xvdir.c xv-3.10a-enhancements/xvdir.c ---- xv-3.10a-bugfixes/xvdir.c 2005-03-20 18:38:30.000000000 -0800 -+++ xv-3.10a-enhancements/xvdir.c 2005-04-25 22:24:28.000000000 -0700 -@@ -62,6 +62,9 @@ - #ifdef HAVE_TIFF - "TIFF", - #endif -+#ifdef HAVE_PNG -+ "PNG", -+#endif - "PostScript", - "PBM/PGM/PPM (raw)", - "PBM/PGM/PPM (ascii)", -@@ -73,9 +76,32 @@ - "Targa (24-bit)", - "FITS", - "PM", -+ "Spectrum SCREEN$", /* [JCE] */ -+ "WBMP", -+#ifdef HAVE_MAG -+ "MAG", -+#endif -+#ifdef HAVE_PIC -+ "PIC", -+#endif -+#ifdef HAVE_MAKI -+ "MAKI (640x400 only)", -+#endif -+#ifdef HAVE_PI -+ "PI", -+#endif -+#ifdef HAVE_PIC2 -+ "PIC2", -+#endif -+#ifdef HAVE_MGCSFX -+ "MgcSfx", -+#endif - MBSEP, - "Filename List"}; - -+#ifdef HAVE_PIC2 -+extern int PIC2SaveParams PARM((char *, int)); -+#endif - - static void arrangeButts PARM((int)); - static void RedrawDList PARM((int, SCRL *)); -@@ -570,7 +596,11 @@ - } - #endif - -+#ifdef AUTO_EXPAND -+ if (Chvdir(tmppath)) { -+#else - if (chdir(tmppath)) { -+#endif - char str[512]; - sprintf(str,"Unable to cd to '%s'\n", tmppath); - *trunc_point = '/'; /* restore the path */ -@@ -635,7 +665,11 @@ - xv_getwd(path, sizeof(path)); - #endif - -+#ifdef AUTO_EXPAND -+ if (Chvdir(path)) { -+#else - if (chdir(path)) { -+#endif - ErrPopUp("Current load/save directory seems to have gone away!", - "\nYikes!"); - #ifdef apollo -@@ -643,7 +677,11 @@ - #else - strcpy(path,"/"); - #endif -+#ifdef AUTO_EXPAND -+ Chvdir(path); -+#else - chdir(path); -+#endif - } - - changedDir = strcmp(path, oldpath); -@@ -748,6 +786,9 @@ - else if (S_ISFIFO(ftype)) fnames[i][0] = C_FIFO; - else if (S_ISSOCK(ftype)) fnames[i][0] = C_SOCK; - else if (fnames[i][0] == C_REG && (mode&0111)) fnames[i][0] = C_EXE; -+#ifdef AUTO_EXPAND -+ else if (Isarchive(fnames[i]+1)) fnames[i][0] = C_DIR; -+#endif - } - else { - /* fprintf(stderr,"problems 'stat-ing' files\n");*/ -@@ -847,7 +888,7 @@ - scrollToFileName(); - } - -- else if (c=='\010' || c=='\177') { /* BS or DEL */ -+ else if (c=='\010') { /* BS */ - if (curPos==0) return(-1); /* at beginning of str */ - xvbcopy(&filename[curPos], &filename[curPos-1], (size_t) (len-curPos+1)); - curPos--; -@@ -872,7 +913,7 @@ - curPos = len; - } - -- else if (c=='\004') { /* ^D: delete character at curPos */ -+ else if (c=='\004' || c=='\177') { /* ^D or DEL: delete character at curPos */ - if (curPos==len) return(-1); - xvbcopy(&filename[curPos+1], &filename[curPos], (size_t) (len-curPos)); - } -@@ -1055,6 +1096,25 @@ - - fullname = GetDirFullName(); - -+#ifdef AUTO_EXPAND -+ { -+ char path[MAXPATHLEN]; -+ -+ GetDirPath(path); -+ Mkvdir(path); -+ if ((i = Isvdir(fullname)) & 01) { -+ char buf[128]; -+ sprintf(buf, -+ "Sorry, you can't save file in the virtual directory, '%s'", -+ path); -+ ErrPopUp(buf, "\nBummer!"); -+ return -1; -+ } -+ if (i & 06) -+ Rmvdir(fullname); -+ } -+#endif -+ - fmt = MBWhich(&fmtMB); - col = MBWhich(&colMB); - -@@ -1116,7 +1176,34 @@ - } - #endif - -+#ifdef HAVE_PNG -+ else if (fmt == F_PNG) { /* PNG */ -+ PNGSaveParams(fullname, col); -+ PNGDialog(1); /* open PNG Dialog box */ -+ dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); -+ return 0; /* always 'succeeds' */ -+ } -+#endif -+ -+#ifdef HAVE_PIC2 -+ else if (fmt == F_PIC2) { /* PIC2 */ -+ if (PIC2SaveParams(fullname, col) < 0) -+ return 0; -+ PIC2Dialog(1); /* open PIC2 Dialog box */ -+ dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); -+ return 0; /* always 'succeeds' */ -+ } -+#endif /* HAVE_PIC2 */ - -+#ifdef HAVE_MGCSFX -+ else if (fmt == F_MGCSFX) { /* MGCSFX */ -+ if (MGCSFXSaveParams(fullname, col) < 0) -+ return 0; -+ MGCSFXDialog(1); /* open MGCSFX Dialog box */ -+ dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); -+ return 0; /* always 'succeeds' */ -+ } -+#endif /* HAVE_MGCSFX */ - - - WaitCursor(); -@@ -1164,6 +1251,10 @@ - rv = WriteBMP (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); - break; - -+ case F_WBMP: -+ rv = WriteWBMP (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); -+ break; -+ - case F_IRIS: - rv = WriteIRIS (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); - break; -@@ -1181,6 +1272,35 @@ - rv = WriteFITS (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, - picComments); - break; -+ -+ case F_ZX: /* [JCE] Spectrum SCREEN$ */ -+ rv = WriteZX (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, -+ picComments); -+ break; -+#ifdef HAVE_MAG -+ case F_MAG: -+ rv = WriteMAG (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, -+ picComments); -+ break; -+#endif /* HAVE_MAG */ -+#ifdef HAVE_PIC -+ case F_PIC: -+ rv = WritePIC (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, -+ picComments); -+ break; -+#endif /* HAVE_PIC */ -+#ifdef HAVE_MAKI -+ case F_MAKI: -+ rv = WriteMAKI (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); -+ break; -+#endif /* HAVE_MAKI */ -+ -+#ifdef HAVE_PI -+ case F_PI: -+ rv = WritePi (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, -+ picComments); -+ break; -+#endif /* HAVE_PI */ - } - - -@@ -1310,7 +1430,8 @@ - - else if (group == F_FORMAT) { - MBSelect(&fmtMB, bnum); -- if (MBWhich(&fmtMB) == F_XBM) { /* turn off all but B/W */ -+ if (MBWhich(&fmtMB) == F_XBM || -+ MBWhich(&fmtMB) == F_WBMP) { /* turn off all but B/W */ - colMB.dim[F_FULLCOLOR] = 1; - colMB.dim[F_GREYSCALE] = 1; - colMB.dim[F_BWDITHER] = 0; -@@ -1389,14 +1510,29 @@ - (strcmp(lowsuf,"eps" )==0) || - (strcmp(lowsuf,"rgb" )==0) || - (strcmp(lowsuf,"tga" )==0) || -- (strcmp(lowsuf,"xpm" )==0) || - (strcmp(lowsuf,"fits")==0) || - (strcmp(lowsuf,"fts" )==0) || -+#ifdef HAVE_JPEG - (strcmp(lowsuf,"jpg" )==0) || - (strcmp(lowsuf,"jpeg")==0) || - (strcmp(lowsuf,"jfif")==0) || -+#endif -+#ifdef HAVE_TIFF - (strcmp(lowsuf,"tif" )==0) || -- (strcmp(lowsuf,"tiff")==0)) { -+ (strcmp(lowsuf,"tiff")==0) || -+#endif -+#ifdef HAVE_PNG -+ (strcmp(lowsuf,"png" )==0) || -+#endif -+ (strcmp(lowsuf,"wbmp")==0) || -+ (strcmp(lowsuf,"xpm" )==0) || -+ (strcmp(lowsuf,"tiff")==0) || -+ (strcmp(lowsuf,"mag" )==0) || -+ (strcmp(lowsuf,"pic" )==0) || -+ (strcmp(lowsuf,"mki" )==0) || -+ (strcmp(lowsuf,"pi" )==0) || -+ (strcmp(lowsuf,"p2" )==0) || -+ (strcmp(lowsuf,"pcd" )==0)) { - - /* found one. set lowsuf = to the new suffix, and tack on to filename */ - -@@ -1419,6 +1555,7 @@ - case F_XBM: strcpy(lowsuf,"xbm"); break; - case F_SUNRAS: strcpy(lowsuf,"ras"); break; - case F_BMP: strcpy(lowsuf,"bmp"); break; -+ case F_WBMP: strcpy(lowsuf,"wbmp"); break; - case F_PS: strcpy(lowsuf,"ps"); break; - case F_IRIS: strcpy(lowsuf,"rgb"); break; - case F_TARGA: strcpy(lowsuf,"tga"); break; -@@ -1432,8 +1569,33 @@ - #ifdef HAVE_TIFF - case F_TIFF: strcpy(lowsuf,"tif"); break; - #endif -+ -+#ifdef HAVE_PNG -+ case F_PNG: strcpy(lowsuf,"png"); break; -+#endif -+ -+#ifdef HAVE_MAG -+ case F_MAG: strcpy(lowsuf,"mag"); break; -+#endif -+ -+#ifdef HAVE_PIC -+ case F_PIC: strcpy(lowsuf,"pic"); break; -+#endif -+ -+#ifdef HAVE_MAKI -+ case F_MAKI: strcpy(lowsuf,"mki"); break; -+#endif -+ -+#ifdef HAVE_PI -+ case F_PI: strcpy(lowsuf,"pi"); break; -+#endif -+ -+#ifdef HAVE_PIC2 -+ case F_PIC2: strcpy(lowsuf,"p2"); break; -+#endif - } - -+ - if (allcaps) { /* upper-caseify lowsuf */ - for (sp=lowsuf; *sp; sp++) - *sp = (islower(*sp)) ? toupper(*sp) : *sp; -@@ -1499,6 +1661,11 @@ - } - #endif - -+#ifdef AUTO_EXPAND -+ Mkvdir(newpath); -+ Dirtovd(newpath); -+#endif -+ - if (stat(newpath, &st)==0) { - int isdir; - -@@ -1596,7 +1763,11 @@ - dopipe = 0; - - /* make sure we're in the correct directory */ -+#ifdef AUTO_EXPAND -+ if (strlen(path)) Chvdir(path); -+#else - if (strlen(path)) chdir(path); -+#endif - - if (ISPIPE(filename[0])) { /* do piping */ - /* make up some bogus temp file to put this in */ -@@ -2002,7 +2173,7 @@ - if (stat(namelist[curname], &origStat)==0) { - haveStat = 1; - if (DEBUG) fprintf(stderr," origStat.size=%ld, origStat.mtime=%ld\n", -- origStat.st_size, origStat.st_mtime); -+ (long)origStat.st_size, (long)origStat.st_mtime); - } - } - } -@@ -2027,7 +2198,7 @@ - - if (stat(namelist[curname], &st)==0) { - if (DEBUG) fprintf(stderr," st.size=%ld, st.mtime=%ld\n", -- st.st_size, st.st_mtime); -+ (long)st.st_size, (long)st.st_mtime); - - if ((st.st_size == origStat.st_size) && - (st.st_mtime == origStat.st_mtime)) return 0; /* no change */ -@@ -2080,3 +2251,164 @@ - } - - -+#ifdef HAVE_PIC2 -+/**** Stuff for PIC2Dialog box ****/ -+FILE *pic2_OpenOutFile(filename, append) -+char *filename; -+int *append; -+{ -+ /* opens file for output. does various error handling bits. Returns -+ an open file pointer if success, NULL if failure */ -+ -+ FILE *fp = NULL; -+ struct stat st; -+ -+ if (!filename || filename[0] == '\0') -+ return (NULL); -+ strcpy(outFName, filename); -+ dopipe = 0; -+ -+ /* make sure we're in the correct directory */ -+#ifdef AUTO_EXPAND -+ if (strlen(path)) Chvdir(path); -+#else -+ if (strlen(path)) chdir(path); -+#endif -+ -+ if (ISPIPE(filename[0])) { /* do piping */ -+ /* make up some bogus temp file to put this in */ -+#ifndef VMS -+ sprintf(outFName, "%s/xvXXXXXX", tmpdir); -+#else -+ strcpy(outFName, "[]xvXXXXXX.lis"); -+#endif -+#ifdef USE_MKSTEMP -+ fp = fdopen(mkstemp(outFName), "w"); -+#else -+ mktemp(outFName); -+#endif -+ dopipe = 1; -+ } -+ -+ -+ /* see if file exists (i.e., we're overwriting) */ -+ *append = 0; -+#ifdef USE_MKSTEMP -+ if (!dopipe) -+#endif -+ if (stat(outFName, &st)==0) { /* stat succeeded, file must exist */ -+ if (ReadFileType(outFName) != RFT_PIC2) { -+ static char *foo[] = { "\nOk", "\033Cancel" }; -+ char str[512]; -+ -+ sprintf(str,"Overwrite existing file '%s'?", outFName); -+ if (PopUp(str, foo, 2)) -+ return (NULL); -+ } else { -+ static char *foo[] = { "\nOk", "\033Cancel" }; -+ char str[512]; -+ -+ sprintf(str,"Append to existing file '%s'?", outFName); -+ if (PopUp(str, foo, 2)) { -+ sprintf(str,"Overwrite existing file '%s'?", outFName); -+ if (PopUp(str, foo, 2)) -+ return (NULL); -+ } else -+ *append = 1; -+ } -+ } -+ -+ /* Open file */ -+#ifdef USE_MKSTEMP -+ if (!dopipe) -+#endif -+ fp = *append ? fopen(outFName, "r+") : fopen(outFName, "w"); -+ if (!fp) { -+ char str[512]; -+ sprintf(str,"Can't write file '%s'\n\n %s.",outFName, ERRSTR(errno)); -+ ErrPopUp(str, "\nBummer"); -+ return (NULL); -+ } -+ -+ return (fp); -+} -+ -+ -+/***************************************/ -+void pic2_KillNullFile(fp) -+FILE *fp; -+{ -+ fseek(fp, (size_t) 0, SEEK_END); -+ if (ftell(fp) > 0) { -+ fclose(fp); -+ return; -+ } else { -+ fclose(fp); -+ unlink(outFName); -+ return; -+ } -+} -+#endif /* HAVE_PIC2 */ -+ -+ -+#ifdef HAVE_MGCSFX -+/**** Stuff for MGCSFX Dialog box ****/ -+/***************************************/ -+int OpenOutFileDesc(filename) -+ char *filename; -+{ -+ /* opens file for output. does various error handling bits. Returns -+ an open file pointer if success, NULL if failure */ -+ -+ int fd; -+ struct stat st; -+ -+ if (!filename || filename[0] == '\0') return -1; -+ strcpy(outFName, filename); -+ dopipe = 0; -+ -+ /* make sure we're in the correct directory */ -+#ifdef AUTO_EXPAND -+ if (strlen(path)) Chvdir(path); -+#else -+ if (strlen(path)) chdir(path); -+#endif -+ -+ if (ISPIPE(filename[0])) { /* do piping */ -+ /* make up some bogus temp file to put this in */ -+#ifndef VMS -+ sprintf(outFName, "%s/xvXXXXXX", tmpdir); -+#else -+ strcpy(outFName, "[]xvXXXXXX.lis"); -+#endif -+#ifdef USE_MKSTEMP -+ close(mkstemp(outFName)); -+#else -+ mktemp(outFName); -+#endif -+ dopipe = 1; -+ } -+ -+ -+ /* if didn't just create it, see if file exists (i.e., we're overwriting) */ -+ if (!dopipe && stat(outFName, &st)==0) { /* stat succeeded, file exists */ -+ static char *foo[] = { "\nOk", "\033Cancel" }; -+ char str[512]; -+ -+ sprintf(str,"Overwrite existing file '%s'?", outFName); -+ if (PopUp(str, foo, 2)) return -1; -+ } -+ -+ -+ /* Open file */ -+ fd = open(outFName, O_WRONLY | O_CREAT | O_TRUNC, (0644)); -+ if (fd < 0) { -+ char str[512]; -+ sprintf(str,"Can't write file '%s'\n\n %s.", outFName, ERRSTR(errno)); -+ ErrPopUp(str, "\nBummer"); -+ return -1; -+ } -+ -+ return fd; -+} -+#endif /* HAVE_MGCSFX */ -diff -ruN xv-3.10a-bugfixes/xvevent.c xv-3.10a-enhancements/xvevent.c ---- xv-3.10a-bugfixes/xvevent.c 2004-05-16 18:02:03.000000000 -0700 -+++ xv-3.10a-enhancements/xvevent.c 2005-05-01 09:33:38.000000000 -0700 -@@ -64,6 +64,8 @@ - - static void annotatePic PARM((void)); - -+static int debkludge_offx; -+static int debkludge_offy; - - /****************/ - int EventLoop() -@@ -71,13 +73,25 @@ - { - XEvent event; - int retval,done,waiting; -- time_t orgtime, curtime; -+#ifdef USE_TICKS -+ clock_t waitsec_ticks=0L, orgtime_ticks=0L, curtime_ticks; -+ clock_t elapsed_ticks=0L, remaining_interval; -+#else -+ time_t orgtime=0L, curtime; -+#endif - - - #ifndef NOSIGNAL - signal(SIGQUIT, onInterrupt); - #endif - -+ if (startGrab == 1) { -+ startGrab = 2; -+ FakeButtonPress(&but[BGRAB]); -+ FakeKeyPress(ctrlW, XK_Return); -+ return(1); -+ } -+ - /* note: there's no special event handling if we're using the root window. - if we're using the root window, we will recieve NO events for mainW */ - -@@ -100,18 +114,24 @@ - - while (!done) { - -- if (waitsec > -1 && canstartwait && !waiting && XPending(theDisp)==0) { -+ if (waitsec >= 0.0 && canstartwait && !waiting && XPending(theDisp)==0) { - /* we wanna wait, we can wait, we haven't started waiting yet, and - all pending events (ie, drawing the image the first time) - have been dealt with: START WAITING */ -- time((time_t *) &orgtime); -+#ifdef USE_TICKS -+ waitsec_ticks = (clock_t)(waitsec * CLK_TCK); -+ orgtime_ticks = times(NULL); /* unclear if NULL valid, but OK on Linux */ -+#else -+ orgtime = time(NULL); -+#endif - waiting = 1; - } - - - /* if there's an XEvent pending *or* we're not doing anything - in real-time (polling, flashing the selection, etc.) get next event */ -- if ((waitsec==-1 && !polling && !HaveSelection()) || XPending(theDisp)>0) { -+ if ((waitsec<0.0 && !polling && !HaveSelection()) || XPending(theDisp)>0) -+ { - XNextEvent(theDisp, &event); - retval = HandleEvent(&event,&done); - } -@@ -121,7 +141,7 @@ - DrawSelection(0); - DrawSelection(1); - XFlush(theDisp); -- Timer(200); -+ Timer(200); /* milliseconds */ - } - - if (polling) { -@@ -129,13 +149,32 @@ - else if (!XPending(theDisp)) sleep(1); - } - -- if (waitsec>-1 && waiting) { -- time((time_t *) &curtime); -- if (curtime - orgtime < waitsec) sleep(1); -- else { -- if (waitloop) return NEXTLOOP; -- else return NEXTQUIT; -- } -+ if (waitsec>=0.0 && waiting) { -+#ifdef USE_TICKS -+ curtime_ticks = times(NULL); /* value in ticks */ -+ if (curtime_ticks < orgtime_ticks) { -+ /* clock ticks rolled over: need to correct for that (i.e., -+ * curtime_ticks is presumably quite small, while orgtime_ticks -+ * should be close to LONG_MAX, so do math accordingly--any way -+ * to check whether clock_t is *not* a signed long?) */ -+ elapsed_ticks = curtime_ticks + (LONG_MAX - orgtime_ticks); -+ } else -+ elapsed_ticks = curtime_ticks - orgtime_ticks; -+ remaining_interval = waitsec_ticks - elapsed_ticks; -+ if (remaining_interval >= (clock_t)(1 * CLK_TCK)) -+ sleep(1); -+ else { -+ /* less than one second remaining: do delay in msec, then return */ -+ Timer((remaining_interval * 1000L) / CLK_TCK); /* can't overflow */ -+ return waitloop? NEXTLOOP : NEXTQUIT; -+ } -+#else -+ curtime = time(NULL); /* value in seconds */ -+ if (curtime - orgtime < (time_t)waitsec) -+ sleep(1); -+ else -+ return waitloop? NEXTLOOP : NEXTQUIT; -+#endif - } - } - } /* while (!done) */ -@@ -154,7 +193,24 @@ - int *donep; - { - static int wasInfoUp=0, wasCtrlUp=0, wasDirUp=0, wasGamUp=0, wasPsUp=0; -- static int wasJpegUp=0, wasTiffUp=0; -+#ifdef HAVE_JPEG -+ static int wasJpegUp=0; -+#endif -+#ifdef HAVE_TIFF -+ static int wasTiffUp=0; -+#endif -+#ifdef HAVE_PNG -+ static int wasPngUp=0; -+#endif -+#ifdef HAVE_PCD -+ static int wasPcdUp=0; -+#endif -+#ifdef HAVE_PIC2 -+ static int wasPic2Up=0; -+#endif -+#ifdef HAVE_MGCSFX -+ static int wasMgcSfxUp=0; -+#endif - - static int mainWKludge=0; /* force first mainW expose after a mainW config - to redraw all of mainW */ -@@ -233,6 +289,28 @@ - if (TIFFCheckEvent(event)) break; /* event has been processed */ - #endif - -+#ifdef HAVE_PNG -+ if (PNGCheckEvent (event)) break; /* event has been processed */ -+#endif -+ -+ if (PCDCheckEvent(event)) break; /* event has been processed */ -+ -+#ifdef HAVE_PIC2 -+ if (PIC2CheckEvent(event)) break; /* event has been processed */ -+#endif -+ -+#ifdef HAVE_PCD -+ if (PCDCheckEvent (event)) break; /* event has been processed */ -+#endif -+ -+#ifdef HAVE_MGCSFX -+ if (MGCSFXCheckEvent(event)) break; /* event has been processed */ -+#endif -+ -+#ifdef TV_MULTILINGUAL -+ if (CharsetCheckEvent(event)) break; /* event has been processed */ -+#endif -+ - if (GamCheckEvent (event)) break; /* event has been processed */ - if (BrowseCheckEvent (event, &retval, &done)) break; /* event eaten */ - if (TextCheckEvent (event, &retval, &done)) break; /* event eaten */ -@@ -344,6 +422,9 @@ - - if (BrowseDelWin(client_event->window)) break; - if (TextDelWin(client_event->window)) break; -+#ifdef TV_MULTILINGUAL -+ if (CharsetDelWin(client_event->window)) break; -+#endif - - if (client_event->window == infoW) InfoBox(0); - else if (client_event->window == gamW) GamBox(0); -@@ -359,6 +440,24 @@ - else if (client_event->window == tiffW) TIFFDialog(0); - #endif - -+#ifdef HAVE_PNG -+ else if (client_event->window == pngW) PNGDialog(0); -+#endif -+ -+ else if (client_event->window == pcdW) PCDDialog(0); -+ -+#ifdef HAVE_PIC2 -+ else if (client_event->window == pic2W) PIC2Dialog(0); -+#endif -+ -+#ifdef HAVE_PCD -+ else if (client_event->window == pcdW) PCDDialog(0); -+#endif -+ -+#ifdef HAVE_MGCSFX -+ else if (client_event->window == mgcsfxW) MGCSFXDialog(0); -+#endif -+ - else if (client_event->window == mainW) Quit(0); - } - } -@@ -534,10 +633,21 @@ - #ifdef HAVE_JPEG - if (wasJpegUp) { JPEGDialog(wasJpegUp); wasJpegUp=0; } - #endif -- - #ifdef HAVE_TIFF - if (wasTiffUp) { TIFFDialog(wasTiffUp); wasTiffUp=0; } - #endif -+#ifdef HAVE_PNG -+ if (wasPngUp) { PNGDialog(wasJpegUp); wasPngUp=0; } -+#endif -+#ifdef HAVE_PCD -+ if (wasPcdUp) { PCDDialog(wasPcdUp); wasPcdUp=0; } -+#endif -+#ifdef HAVE_PIC2 -+ if (wasPic2Up) { PIC2Dialog(wasPic2Up); wasPic2Up=0; } -+#endif -+#ifdef HAVE_MGCSFX -+ if (wasMgcSfxUp) { MGCSFXDialog(wasMgcSfxUp); wasMgcSfxUp=0; } -+#endif - } - } - } -@@ -572,10 +682,21 @@ - #ifdef HAVE_JPEG - if (jpegUp) { wasJpegUp = jpegUp; JPEGDialog(0); } - #endif -- - #ifdef HAVE_TIFF - if (tiffUp) { wasTiffUp = tiffUp; TIFFDialog(0); } - #endif -+#ifdef HAVE_PNG -+ if (pngUp) { wasPngUp = pngUp; PNGDialog(0); } -+#endif -+#ifdef HAVE_PCD -+ if (pcdUp) { wasPcdUp = pcdUp; PCDDialog(0); } -+#endif -+#ifdef HAVE_PIC2 -+ if (pic2Up) { wasPic2Up = pic2Up; PIC2Dialog(0); } -+#endif -+#ifdef HAVE_MGCSFX -+ if (mgcsfxUp) { wasMgcSfxUp = mgcsfxUp; MGCSFXDialog(0); } -+#endif - } - } - } -@@ -641,6 +762,30 @@ - p_offy = xwa.y; - } - -+ /* Gather info to keep right border inside */ -+ { -+ Window current; -+ Window root_r; -+ Window parent_r; -+ Window *children_r; -+ int nchildren_r; -+ XWindowAttributes xwa; -+ -+ parent_r=mainW; -+ current=mainW; -+ do { -+ current=parent_r; -+ XQueryTree(theDisp, current, &root_r, &parent_r, -+ &children_r, &nchildren_r); -+ if (children_r!=NULL) { -+ XFree(children_r); -+ } -+ } while(parent_r!=root_r); -+ XGetWindowAttributes(theDisp, current, &xwa); -+ debkludge_offx=eWIDE-xwa.width+p_offx; -+ debkludge_offy=eHIGH-xwa.height+p_offy; -+ } -+ - - /* move window around a bit... */ - { -@@ -997,7 +1142,8 @@ - - int i; - char txt[512], str[PRINTCMDLEN + 10]; -- static char *labels[] = { " Color", " Grayscale", " B/W", "\033Cancel" }; -+ static char *labels[] = { "\03Color", "\07Grayscale", " B/W", "\033Cancel" }; -+ /* ^B ("\02") already used for moving cursor back */ - - strcpy(txt, "Print: Enter a command that will read a PostScript file "); - strcat(txt, "from stdin and print it to the desired printer.\n\n"); -@@ -1147,6 +1293,26 @@ - if (TIFFCheckEvent(event)) break; - #endif - -+#ifdef HAVE_PNG -+ if (PNGCheckEvent (event)) break; -+#endif -+ -+#ifdef HAVE_PCD -+ if (PCDCheckEvent (event)) break; /* event has been processed */ -+#endif -+ -+#ifdef HAVE_PIC2 -+ if (PIC2CheckEvent(event)) break; -+#endif -+ -+#ifdef HAVE_MGCSFX -+ if (MGCSFXCheckEvent(event)) break; -+#endif -+ -+#ifdef TV_MULTILINGUAL -+ if (CharsetCheckEvent(event)) break; -+#endif -+ - if (GamCheckEvent (event)) break; - if (BrowseCheckEvent (event, &retval, &done)) break; - if (TextCheckEvent (event, &retval, &done)) break; -@@ -1276,6 +1442,48 @@ - else if (shift) BlurPaint(); - break; - -+ case Button4: /* note min vs. max, + vs. - */ -+ if (win == ctrlW || win == nList.win || win == nList.scrl.win) { -+ SCRL *sp=&nList.scrl; -+ int halfpage=sp->page/2; -+ -+ if (sp->val > sp->min+halfpage) -+ SCSetVal(sp,sp->val-halfpage); -+ else -+ SCSetVal(sp,sp->min); -+ } -+ else if (win == dirW || win == dList.win || win == dList.scrl.win) { -+ SCRL *sp=&dList.scrl; -+ int halfpage=sp->page/2; -+ -+ if (sp->val > sp->min+halfpage) -+ SCSetVal(sp,sp->val-halfpage); -+ else -+ SCSetVal(sp,sp->min); -+ } -+ break; -+ -+ case Button5: /* note max vs. min, - vs. + */ -+ if (win == ctrlW || win == nList.win || win == nList.scrl.win) { -+ SCRL *sp=&nList.scrl; -+ int halfpage=sp->page/2; -+ -+ if (sp->val < sp->max-halfpage) -+ SCSetVal(sp,sp->val+halfpage); -+ else -+ SCSetVal(sp,sp->max); -+ } -+ else if (win == dirW || win == dList.win || win == dList.scrl.win) { -+ SCRL *sp=&dList.scrl; -+ int halfpage=sp->page/2; -+ -+ if (sp->val < sp->max-halfpage) -+ SCSetVal(sp,sp->val+halfpage); -+ else -+ SCSetVal(sp,sp->max); -+ } -+ break; -+ - default: break; - } - } -@@ -1364,16 +1572,35 @@ - if (TIFFCheckEvent(event)) break; - #endif - -+#ifdef HAVE_PNG -+ if (PNGCheckEvent (event)) break; -+#endif -+ -+ if (PCDCheckEvent (event)) break; -+ -+#ifdef HAVE_PIC2 -+ if (PIC2CheckEvent(event)) break; -+#endif -+ -+#ifdef HAVE_PCD -+ if (PCDCheckEvent (event)) break; -+#endif -+ -+#ifdef HAVE_MGCSFX -+ if (MGCSFXCheckEvent(event)) break; -+#endif -+ - if (GamCheckEvent (event)) break; - if (BrowseCheckEvent (event, &retval, &done)) break; - if (TextCheckEvent (event, &retval, &done)) break; - - -- /* check for pageup/pagedown, 'p' in main window -- (you can use shift-up or shift-down if no crop rectangle drawn) -- (for viewing multipage docs) */ -+ /* Support for multi-image files ("multipage docs"). Check for PgUp/PgDn -+ or 'p' in any window but control or directory; PgUp/PgDn are already -+ used to page through the file list in those windows. If no cropping -+ rectangle is active, shift-Up and shift-Down also work. */ - -- if (key_event->window == mainW) { -+ if (key_event->window != ctrlW && key_event->window != dirW) { - dealt = 1; - - ck = CursorKey(ks, shift, 0); -@@ -1578,13 +1805,13 @@ - } - break; - -- case '\010': -- case '\177': FakeButtonPress(&but[BPREV]); break; -+ case '\010': FakeButtonPress(&but[BPREV]); break; - - - case '\014': FakeButtonPress(&but[BLOAD]); break; /* ^L */ - case '\023': FakeButtonPress(&but[BSAVE]); break; /* ^S */ - case '\020': FakeButtonPress(&but[BPRINT]); break; /* ^P */ -+ case '\177': - case '\004': FakeButtonPress(&but[BDELETE]); break; /* ^D */ - - /* BCOPY, BCUT, BPASTE, BCLEAR handled in 'meta' case */ -@@ -2025,6 +2252,16 @@ - if (xwa->width < dispWIDE && xwc.x < p_offx) xwc.x = p_offx; - if (xwa->height < dispHIGH && xwc.y < p_offy) xwc.y = p_offy; - -+ /* Try to keep bottom right decorations inside */ -+ if (xwc.x+eWIDE-debkludge_offx>dispWIDE) { -+ xwc.x=dispWIDE-eWIDE+debkludge_offx; -+ if (xwc.x<0) xwc.x=0; -+ } -+ if (xwc.y+eHIGH-debkludge_offy>dispHIGH) { -+ xwc.y=dispHIGH-eHIGH+debkludge_offy; -+ if (xwc.y<0) xwc.y=0; -+ } -+ - xwc.width = xwa->width; - xwc.height = xwa->height; - -@@ -2370,6 +2607,24 @@ - if (tiffUp) TIFFDialog(0); /* close tiff window */ - #endif - -+#ifdef HAVE_PNG -+ if (pngUp) PNGDialog(0); /* close png window */ -+#endif -+ -+ if (pcdUp) PCDDialog(0); /* close pcd window */ -+ -+#ifdef HAVE_PIC2 -+ if (pic2Up) PIC2Dialog(0); /* close pic2 window */ -+#endif -+ -+#ifdef HAVE_PCD -+ if (pcdUp) PCDDialog(0); /* close pcd window */ -+#endif -+ -+#ifdef HAVE_MGCSFX -+ if (mgcsfxUp) MGCSFXDialog(0); /* close mgcsfx window */ -+#endif -+ - ClosePopUp(); - - /* make the interrupt signal look like a '\n' keypress in ctrlW */ -@@ -2574,26 +2829,43 @@ - static void paintLine(x,y,x1,y1) - int x,y,x1,y1; - { -- int dx,dy,i,lx,ly,adx,ady; -+ int t,dx,dy,d,dd; - -- dx = x1-x; dy = y1-y; -- adx = abs(dx); ady = abs(dy); -+ dx = abs(x1-x); dy = abs(y1-y); - -- if (dx == 0 && dy == 0) paintPixel(x,y); -- -- else if (adx > ady) { /* X is major axis */ -- for (i=0; i<=adx; i++) { -- lx = x + (i * dx + (adx/2)) / abs(dx); -- ly = y + (i * dy + (adx/2)) / abs(dx); -- paintPixel(lx,ly); -+ if (dx >= dy) { /* X is major axis */ -+ if (x > x1) { -+ t = x; x = x1; x1 = t; -+ t = y; y = y1; y1 = t; -+ } -+ d = dy + dy - dx; -+ dd = y < y1 ? 1 : -1; -+ while (x <= x1) { -+ paintPixel(x,y); -+ if (d > 0) { -+ y += dd; -+ d -= dx + dx; -+ } -+ ++x; -+ d += dy + dy; - } - } - - else { /* Y is major axis */ -- for (i=0; i<=ady; i++) { -- lx = x + (i * dx + (ady/2)) / ady; -- ly = y + (i * dy + (ady/2)) / ady; -- paintPixel(lx,ly); -+ if (y > y1) { -+ t = x; x = x1; x1 = t; -+ t = y; y = y1; y1 = t; -+ } -+ d = dx + dx - dy; -+ dd = x < x1 ? 1 : -1; -+ while (y <= y1) { -+ paintPixel(x,y); -+ if (d > 0) { -+ x += dd; -+ d -= dy + dy; -+ } -+ ++y; -+ d += dx + dx; - } - } - -diff -ruN xv-3.10a-bugfixes/xvfits.c xv-3.10a-enhancements/xvfits.c ---- xv-3.10a-bugfixes/xvfits.c 2005-04-02 21:08:45.000000000 -0800 -+++ xv-3.10a-enhancements/xvfits.c 2005-04-17 14:45:28.000000000 -0700 -@@ -14,7 +14,7 @@ - * provided "as is" without express or implied warranty. - */ - -- -+#define NEEDSDIR /* for S_IRUSR|S_IWUSR */ - #include "xv.h" - - #define NCARDS (36) -@@ -228,7 +228,7 @@ - * If there was a problem writing files, then a error message will be set. - */ - -- int i, npixels=nx * ny, nwrt; -+ int i, npixels=nx * ny, nwrt, tmpfd; - FILE *fp; - char *error; - char filename[70]; -@@ -254,7 +254,12 @@ - - for (i=0; i < nz && !error; i++) { - sprintf(filename, "%s%d", basename, i+1); -- fp = xv_fopen(filename, "w"); -+ tmpfd = open(filename,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); -+ if (tmpfd < 0) { -+ error = "Unable to open temporary file"; -+ break; -+ } -+ fp = fdopen(tmpfd, "w"); - if (!fp) { - error = "Unable to open temporary file"; - break; -@@ -262,13 +267,17 @@ - - if (wrheader(fp, nx, ny, comment)) { - error = "I/O error writing temporary file"; -+ fflush(fp); - fclose(fp); - unlink(filename); -+ close(tmpfd); - break; - } - - nwrt = fwrite(image+i*npixels, sizeof(byte), (size_t) npixels, fp); -+ fflush(fp); - fclose(fp); -+ close(tmpfd); - - if (nwrt == 0) { /* failed to write any data */ - error = "I/O error writing temporary file"; -diff -ruN xv-3.10a-bugfixes/xvgam.c xv-3.10a-enhancements/xvgam.c ---- xv-3.10a-bugfixes/xvgam.c 2004-05-16 18:02:11.000000000 -0700 -+++ xv-3.10a-enhancements/xvgam.c 2004-05-16 18:06:48.000000000 -0700 -@@ -265,11 +265,11 @@ - BTCreate(&gbut[G_BRNDCOL], cmapF, 5 + 66 + 67 + 2, 189, 66, BUTTH, - "Random", infofg, infobg, hicol, locol); - -- DCreate(&rhDial, cmapF, 5, 215, 66, 100, 0,360,180, 5, -+ DCreate(&rhDial, cmapF, 5, 215, 66, 100, 0.0, 360.0, 180.0, 1.0, 5.0, - infofg, infobg, hicol, locol, "Hue", NULL); -- DCreate(&gsDial, cmapF, 72, 215, 66, 100, 0,360,180, 5, -+ DCreate(&gsDial, cmapF, 72, 215, 66, 100, 0.0, 360.0, 180.0, 1.0, 5.0, - infofg, infobg, hicol, locol, "Sat.", NULL); -- DCreate(&bvDial, cmapF, 139, 215, 66, 100, 0,360,180, 5, -+ DCreate(&bvDial, cmapF, 139, 215, 66, 100, 0.0, 360.0, 180.0, 1.0, 5.0, - infofg, infobg, hicol, locol, "Value", NULL); - - rhDial.drawobj = gsDial.drawobj = bvDial.drawobj = dragEditColor; -@@ -359,7 +359,7 @@ - - srcHD.drawobj = dstHD.drawobj = whtHD.drawobj = dragHueDial; - -- DCreate(&satDial, hsvF, 100, 199, 100, 121, -100, 100, 0, 5, -+ DCreate(&satDial, hsvF, 100, 199, 100, 121, -100.0, 100.0, 0.0, 1.0, 5.0, - infofg, infobg,hicol,locol, "Saturation", "%"); - - hueRB = RBCreate(NULL, hsvF, 7, 153, "1", -@@ -722,7 +722,7 @@ - - if (whtHD.enabCB.val && whtHD.satval) hsvnonlinear++; - -- if (satDial.val != 0) hsvnonlinear++; -+ if (satDial.val != 0.0) hsvnonlinear++; - - /* check intensity graf */ - for (i=0; i<256 && intGraf.func[i]==i; i++); -@@ -1291,14 +1291,14 @@ - rgb2hsv(rcmap[editColor], gcmap[editColor], bcmap[editColor], &h, &s, &v); - if (h<0) h = 0; - -- DSetVal(&rhDial, (int) h); -- DSetVal(&gsDial, (int) (s*100)); -- DSetVal(&bvDial, (int) (v*100)); -+ DSetVal(&rhDial, h); -+ DSetVal(&gsDial, s*100); -+ DSetVal(&bvDial, v*100); - } - else { -- DSetVal(&rhDial, rcmap[editColor]); -- DSetVal(&gsDial, gcmap[editColor]); -- DSetVal(&bvDial, bcmap[editColor]); -+ DSetVal(&rhDial, (double)rcmap[editColor]); -+ DSetVal(&gsDial, (double)gcmap[editColor]); -+ DSetVal(&bvDial, (double)bcmap[editColor]); - } - } - -@@ -1310,16 +1310,15 @@ - - if (hsvmode) { - int rv, gv, bv; -- hsv2rgb((double) rhDial.val, ((double) gsDial.val) / 100.0, -- ((double) bvDial.val) / 100.0, &rv, &gv, &bv); -+ hsv2rgb(rhDial.val, gsDial.val / 100.0, bvDial.val / 100.0, &rv, &gv, &bv); - rcmap[editColor] = rv; - gcmap[editColor] = gv; - bcmap[editColor] = bv; - } - else { -- rcmap[editColor] = rhDial.val; -- gcmap[editColor] = gsDial.val; -- bcmap[editColor] = bvDial.val; -+ rcmap[editColor] = (int)rhDial.val; -+ gcmap[editColor] = (int)gsDial.val; -+ bcmap[editColor] = (int)bvDial.val; - } - } - -@@ -1561,9 +1560,9 @@ - gsDial.title = "Green"; - bvDial.title = "Blue"; - -- DSetRange(&rhDial, 0, 255, rcmap[editColor], 16); -- DSetRange(&gsDial, 0, 255, gcmap[editColor], 16); -- DSetRange(&bvDial, 0, 255, bcmap[editColor], 16); -+ DSetRange(&rhDial, 0.0, 255.0, (double)rcmap[editColor], 1.0, 16.0); -+ DSetRange(&gsDial, 0.0, 255.0, (double)gcmap[editColor], 1.0, 16.0); -+ DSetRange(&bvDial, 0.0, 255.0, (double)bcmap[editColor], 1.0, 16.0); - - XClearWindow(theDisp, rhDial.win); DRedraw(&rhDial); - XClearWindow(theDisp, gsDial.win); DRedraw(&gsDial); -@@ -1581,9 +1580,9 @@ - &h, &s, &v); - - if (h<0.0) h = 0.0; -- DSetRange(&rhDial, 0, 360, (int) h, 5); -- DSetRange(&gsDial, 0, 100, (int) (s*100), 5); -- DSetRange(&bvDial, 0, 100, (int) (v*100), 5); -+ DSetRange(&rhDial, 0.0, 360.0, h, 1.0, 5.0); -+ DSetRange(&gsDial, 0.0, 100.0, s*100, 1.0, 5.0); -+ DSetRange(&bvDial, 0.0, 100.0, v*100, 1.0, 5.0); - - XClearWindow(theDisp, rhDial.win); DRedraw(&rhDial); - XClearWindow(theDisp, gsDial.win); DRedraw(&gsDial); -@@ -1891,7 +1890,7 @@ - } - - /* apply satDial value to s */ -- s = s + ((double) satDial.val) / 100.0; -+ s = s + satDial.val / 100.0; - if (s<0.0) s = 0.0; - if (s>1.0) s = 1.0; - -@@ -2007,7 +2006,7 @@ - - gs->hueRBnum = RBWhich(hueRB); - -- gs->satval = satDial.val; -+ gs->satval = (int)satDial.val; - GetGrafState(&intGraf,&gs->istate); - GetGrafState(&rGraf, &gs->rstate); - GetGrafState(&gGraf, &gs->gstate); -@@ -2064,8 +2063,8 @@ - changed++; - } - -- if (gs->satval != satDial.val) { -- DSetVal(&satDial,gs->satval); -+ if (gs->satval != (int)satDial.val) { -+ DSetVal(&satDial,(double)gs->satval); - changed++; - } - -@@ -3200,7 +3199,7 @@ - - if (whtHD.enabCB.val && whtHD.satval) hsvmod++; - -- if (satDial.val != 0) hsvmod++; -+ if (satDial.val != 0.0) hsvmod++; - - /* check intensity graf */ - for (i=0; i<256; i++) { -@@ -3284,7 +3283,7 @@ - } - - /* apply satDial value to s */ -- s = s + satDial.val; -+ s = s + (int)satDial.val; - if (s< 0) s = 0; - if (s>100) s = 100; - -diff -ruN xv-3.10a-bugfixes/xvgif.c xv-3.10a-enhancements/xvgif.c ---- xv-3.10a-bugfixes/xvgif.c 2005-04-03 11:53:13.000000000 -0700 -+++ xv-3.10a-enhancements/xvgif.c 2005-04-30 21:47:44.000000000 -0700 -@@ -50,6 +50,7 @@ - BytesPerScanline, /* bytes per scanline in output raster */ - ColorMapSize, /* number of colors */ - Background, /* background color */ -+ Transparent, /* transparent color (GRR 19980314) */ - CodeSize, /* Code size, read from GIF header */ - InitCodeSize, /* Starting code size, used during Clear */ - Code, /* Value returned by ReadCode */ -@@ -111,16 +112,20 @@ - - register byte ch, *origptr; - register int i, block; -- int aspect, gotimage; -+ int aspect; -+ char tmpname[256]; -+ byte r[256], g[256], b[256]; - - /* initialize variables */ -- BitOffset = XC = YC = OutCount = gotimage = 0; -+ BitOffset = XC = YC = OutCount = 0; - Pass = -1; - RawGIF = Raster = pic8 = NULL; - gif89 = 0; -+ Transparent = -1; - - pinfo->pic = (byte *) NULL; - pinfo->comment = (char *) NULL; -+ pinfo->numpages= 0; - - bname = BaseName(fname); - fp = xv_fopen(fname,"r"); -@@ -145,7 +150,7 @@ - - if (fread(dataptr, (size_t) filesize, (size_t) 1, fp) != 1) - return( gifError(pinfo, "GIF data read failed") ); -- -+ fclose(fp); - - origptr = dataptr; - -@@ -161,6 +166,7 @@ - RWidth = ch + 0x100 * NEXTBYTE; /* screen dimensions... not used. */ - ch = NEXTBYTE; - RHeight = ch + 0x100 * NEXTBYTE; -+ if (DEBUG) fprintf(stderr,"GIF89 logical screen = %d x %d\n",RWidth,RHeight); - - ch = NEXTBYTE; - HasColormap = ((ch & COLORMAPMASK) ? True : False); -@@ -176,6 +182,8 @@ - if (!gif89) return(gifError(pinfo,"corrupt GIF file (screen descriptor)")); - else normaspect = (float) (aspect + 15) / 64.0; /* gif89 aspect ratio */ - if (DEBUG) fprintf(stderr,"GIF89 aspect = %f\n", normaspect); -+ /* FIXME: apparently this _should_ apply to all frames in a multi-image -+ * GIF (i.e., PgUp/PgDn), but it doesn't */ - } - - -@@ -183,20 +191,23 @@ - - if (HasColormap) - for (i=0; i<ColorMapSize; i++) { -- pinfo->r[i] = NEXTBYTE; -- pinfo->g[i] = NEXTBYTE; -- pinfo->b[i] = NEXTBYTE; -+ r[i] = NEXTBYTE; -+ g[i] = NEXTBYTE; -+ b[i] = NEXTBYTE; - } - else { /* no colormap in GIF file */ - /* put std EGA palette (repeated 16 times) into colormap, for lack of - anything better to do */ - - for (i=0; i<256; i++) { -- pinfo->r[i] = EGApalette[i&15][0]; -- pinfo->g[i] = EGApalette[i&15][1]; -- pinfo->b[i] = EGApalette[i&15][2]; -+ r[i] = EGApalette[i&15][0]; -+ g[i] = EGApalette[i&15][1]; -+ b[i] = EGApalette[i&15][2]; - } - } -+ memcpy(pinfo->r, r, sizeof r); -+ memcpy(pinfo->g, g, sizeof g); -+ memcpy(pinfo->b, b, sizeof b); - - /* possible things at this point are: - * an application extension block -@@ -334,12 +345,28 @@ - if (DEBUG) fprintf(stderr,"Graphic Control extension\n\n"); - - SetISTR(ISTR_INFO, "%s: %s", bname, -- "Graphic Control Extension in GIF file. Ignored."); -+ "Graphic Control Extension ignored."); - -- /* read (and ignore) data sub-blocks */ -+ /* read (and ignore) data sub-blocks, unless compositing with -+ * user-defined background */ - do { -- j = 0; sbsize = NEXTBYTE; -- while (j<sbsize) { SKIPBYTE; j++; } -+ j = 0; -+ sbsize = NEXTBYTE; -+ /* GRR 19980314: get transparent index out of block */ -+ if (have_imagebg && sbsize == 4 && Transparent < 0) { -+ byte packed_fields = NEXTBYTE; -+ -+ j++; -+ SKIPBYTE; j++; -+ SKIPBYTE; j++; -+ if (packed_fields & 1) { -+ Transparent = NEXTBYTE; -+ j++; -+ } -+ } -+ while (j<sbsize) { -+ SKIPBYTE; j++; -+ } - } while (sbsize); - } - -@@ -376,36 +403,42 @@ - - - else if (block == IMAGESEP) { -- if (DEBUG) fprintf(stderr,"imagesep (got=%d) ",gotimage); -+ if (DEBUG) fprintf(stderr,"imagesep (page=%d) ",pinfo->numpages+1); - if (DEBUG) fprintf(stderr," at start: offset=0x%x\n",dataptr-RawGIF); - -- if (gotimage) { /* just skip over remaining images */ -- int i,misc,ch,ch1; -+ BitOffset = XC = YC = Pass = OutCount = 0; - -- /* skip image header */ -- SKIPBYTE; SKIPBYTE; /* left position */ -- SKIPBYTE; SKIPBYTE; /* top position */ -- SKIPBYTE; SKIPBYTE; /* width */ -- SKIPBYTE; SKIPBYTE; /* height */ -- misc = NEXTBYTE; /* misc. bits */ -- -- if (misc & 0x80) { /* image has local colormap. skip it */ -- for (i=0; i< 1 << ((misc&7)+1); i++) { -- SKIPBYTE; SKIPBYTE; SKIPBYTE; -+ if (pinfo->numpages > 0) { /* do multipage stuff */ -+ if (pinfo->numpages == 1) { /* first time only... */ -+ xv_mktemp(pinfo->pagebname, "xvpgXXXXXX"); -+ if (pinfo->pagebname[0] == '\0') { -+ ErrPopUp("LoadGIF: Unable to create temporary filename???", -+ "\nHow unlikely!"); -+ return 0; - } - } -- -- SKIPBYTE; /* minimum code size */ -- -- /* skip image data sub-blocks */ -- do { -- ch = ch1 = NEXTBYTE; -- while (ch--) SKIPBYTE; -- if ((dataptr - RawGIF) > filesize) break; /* EOF */ -- } while(ch1); -+ sprintf(tmpname, "%s%d", pinfo->pagebname, pinfo->numpages); -+ fp = xv_fopen(tmpname, "w"); -+ if (!fp) { -+ ErrPopUp("LoadGIF: Unable to open temp file", "\nDang!"); -+ return 0; -+ } -+ if (WriteGIF(fp, pinfo->pic, pinfo->type, pinfo->w, pinfo->h, pinfo->r, -+ pinfo->g, pinfo->b, numcols, pinfo->colType, NULL)) { -+ fclose(fp); -+ ErrPopUp("LoadGIF: Error writing temp file", "\nBummer!"); -+ return 0; -+ } -+ fclose(fp); -+ free(pinfo->pic); -+ pinfo->pic = (byte *) NULL; -+ if (HasColormap) { -+ memcpy(pinfo->r, r, sizeof r); -+ memcpy(pinfo->g, g, sizeof g); -+ memcpy(pinfo->b, b, sizeof b); -+ } - } -- -- else if (readImage(pinfo)) gotimage = 1; -+ if (readImage(pinfo)) pinfo->numpages++; - if (DEBUG) fprintf(stderr," at end: dataptr=0x%x\n",dataptr-RawGIF); - } - -@@ -425,7 +458,7 @@ - sprintf(str, "Unknown block type (0x%02x) at offset 0x%x", - block, (dataptr - origptr) - 1); - -- if (!gotimage) return gifError(pinfo, str); -+ if (!pinfo->numpages) return gifError(pinfo, str); - else gifWarning(str); - } - -@@ -438,8 +471,34 @@ - free(RawGIF); RawGIF = NULL; - free(Raster); Raster = NULL; - -- if (!gotimage) -+ if (!pinfo->numpages) - return( gifError(pinfo, "no image data found in GIF file") ); -+ if (pinfo->numpages > 1) { -+ /* write the last page temp file */ -+ int numpages = pinfo->numpages; -+ char *comment = pinfo->comment; -+ sprintf(tmpname, "%s%d", pinfo->pagebname, pinfo->numpages); -+ fp = xv_fopen(tmpname, "w"); -+ if (!fp) { -+ ErrPopUp("LoadGIF: Unable to open temp file", "\nDang!"); -+ return 0; -+ } -+ if (WriteGIF(fp, pinfo->pic, pinfo->type, pinfo->w, pinfo->h, pinfo->r, -+ pinfo->g, pinfo->b, numcols, pinfo->colType, NULL)) { -+ fclose(fp); -+ ErrPopUp("LoadGIF: Error writing temp file", "\nBummer!"); -+ return 0; -+ } -+ fclose(fp); -+ free(pinfo->pic); -+ pinfo->pic = (byte *) NULL; -+ -+ /* load the first page temp file */ -+ sprintf(tmpname, "%s%d", pinfo->pagebname, 1); -+ i = LoadGIF(tmpname, pinfo); -+ pinfo->numpages = numpages; -+ pinfo->comment = comment; -+ } - - return 1; - } -@@ -484,6 +543,17 @@ - } - - -+ /* GRR 19980314 */ -+ /* need not worry about size of EGA palette: full 256 colors */ -+ if (have_imagebg && Transparent >= 0 && -+ Transparent < ((Misc&0x80)? (1 << ((Misc&7)+1)) : ColorMapSize) ) -+ { -+ pinfo->r[Transparent] = (imagebgR >> 8); -+ pinfo->g[Transparent] = (imagebgG >> 8); -+ pinfo->b[Transparent] = (imagebgB >> 8); -+ } -+ -+ - - /* Start reading the raster data. First we get the intial code size - * and compute decompressor constant values, based on this code size. -@@ -540,7 +610,7 @@ - return( gifError(pinfo, "image dimensions out of range") ); - picptr = pic8 = (byte *) malloc((size_t) maxpixels); - if (!pic8) FatalError("LoadGIF: couldn't malloc 'pic8'"); -- -+ - - - /* Decompress the file, continuing until you see the GIF EOF code. -@@ -642,11 +712,10 @@ - SetISTR(ISTR_WARNING,"%s: %s", bname, - "This GIF file seems to be truncated. Winging it."); - if (!Interlace) /* clear->EOBuffer */ -- xvbzero((char *) pic8+npixels, (size_t) (maxpixels-npixels)); -+ xvbzero((char *) pic8+npixels, -+ (size_t) (maxpixels-npixels<0 ? 0 : maxpixels-npixels)); - } - -- fclose(fp); -- - /* fill in the PICINFO structure */ - - pinfo->pic = pic8; -diff -ruN xv-3.10a-bugfixes/xvgrab.c xv-3.10a-enhancements/xvgrab.c ---- xv-3.10a-bugfixes/xvgrab.c 2004-05-16 18:03:30.000000000 -0700 -+++ xv-3.10a-enhancements/xvgrab.c 2005-04-25 23:39:32.000000000 -0700 -@@ -14,6 +14,13 @@ - #define NEEDSTIME - #include "xv.h" - -+/* Allow flexibility in use of buttons JPD */ -+#define WINDOWGRABMASK Button1Mask /* JPD prefers Button2Mask */ -+#define RECTGTRACKMASK Button2Mask /* JPD prefers Button1Mask*/ -+#define CANCELGRABMASK Button3Mask -+ -+#define DO_GRABFLASH /* JPD prefers not to do that; just a loss of time ... */ -+ - - union swapun { - CARD32 l; -@@ -69,12 +76,15 @@ - 0 if cancelled */ - - int i, x, y, x1, y1, x2, y2, ix, iy, iw, ih, rv; -- int rx, ry, pretendGotB1, autograb; -+ int rx, ry, GotButton, autograb; -+ int cancelled = 0; - Window rW, cW, clickWin; - unsigned int mask; -+#ifdef RECOLOR_GRAB_CURSOR - XColor fc, bc; -+#endif - -- pretendGotB1 = 0; -+ GotButton = 0; - - if (grabInProgress) return 0; /* avoid recursive grabs during delay */ - -@@ -122,15 +132,23 @@ - free(grabPic); grabPic = (byte *) NULL; - } - -- -+ /* recolor cursor to indicate that grabbing is active? */ -+ /* Instead, change cursor JPD */ -+#ifdef RECOLOR_GRAB_CURSOR - fc.flags = bc.flags = DoRed | DoGreen | DoBlue; - fc.red = fc.green = fc.blue = 0xffff; - bc.red = bc.green = bc.blue = 0x0000; - XRecolorCursor(theDisp, tcross, &fc, &bc); -+#endif - - - XBell(theDisp, 0); /* beep once at start of grab */ - -+ /* Change cursor to top_left_corner JPD */ -+ XGrabPointer(theDisp, rootW, False, -+ PointerMotionMask|ButtonPressMask|ButtonReleaseMask, -+ GrabModeAsync, GrabModeAsync, None, tlcorner, CurrentTime); -+ - if (!autograb) XGrabButton(theDisp, (u_int) AnyButton, 0, rootW, False, 0, - GrabModeAsync, GrabModeSync, None, tcross); - -@@ -142,7 +160,7 @@ - rv = 0; - goto exit; - } -- else { pretendGotB1 = 1; mask = Button1Mask; } -+ else { GotButton = 1; mask = WINDOWGRABMASK; } - } - - else { /* !autograb */ -@@ -170,16 +188,20 @@ - } - } - -+ XUngrabPointer(theDisp, CurrentTime); -+ /* Reset cursor to XC_tcross JPD */ -+ XGrabPointer(theDisp, rootW, False, -+ PointerMotionMask|ButtonPressMask|ButtonReleaseMask, -+ GrabModeAsync, GrabModeAsync, None, tcross, CurrentTime); - - /*** - *** got button click (or pretending we did, if autograb) - ***/ - -- -- if (mask & Button3Mask || rW!=rootW) { /* Button3: CANCEL GRAB */ -+ if (mask & CANCELGRABMASK || rW!=rootW) { /* CANCEL GRAB */ - while (1) { /* wait for button to be released */ - if (XQueryPointer(theDisp,rootW,&rW,&cW,&rx,&ry,&x1,&y1,&mask)) { -- if (!(mask & Button3Mask)) break; -+ if (!(mask & CANCELGRABMASK)) break; - } - } - -@@ -187,19 +209,21 @@ - XBell(theDisp, 0); - XBell(theDisp, 0); - rv = 0; -+ cancelled = 1; - goto exit; - } - - -- -- if (mask & Button1Mask) { /* Button1: GRAB WINDOW (& FRAME, maybe) */ -- while (!pretendGotB1) { /* wait for button to be released, if clicked */ -+ if (mask & WINDOWGRABMASK) { /* GRAB WINDOW (& FRAME, maybe) */ -+ while (!GotButton) { /* wait for button to be released, if clicked */ - int rx,ry,x1,y1; Window rW, cW; - if (XQueryPointer(theDisp,rootW,&rW,&cW,&rx,&ry,&x1,&y1,&mask)) { -- if (!(mask & Button1Mask)) break; -+ if (!(mask & WINDOWGRABMASK)) break; - } - } - -+ grabwin: -+ - clickWin = (cW) ? cW : rootW; - - if (clickWin == rootW) { /* grab entire screen */ -@@ -223,7 +247,6 @@ - } - } - -- - /* range checking: keep rectangle fully on-screen */ - if (ix<0) { iw += ix; ix = 0; } - if (iy<0) { ih += iy; iy = 0; } -@@ -244,8 +267,7 @@ - endflash(); - } - -- -- else { /* Button2: TRACK A RECTANGLE */ -+ else { /* TRACK A RECTANGLE */ - int origrx, origry; - - clickWin = rootW; -@@ -259,7 +281,7 @@ - /* Wait for button release while tracking rectangle on screen */ - while (1) { - if (XQueryPointer(theDisp,rootW,&rW,&cW,&rx,&ry,&x,&y,&mask)) { -- if (!(mask & Button2Mask)) break; -+ if (!(mask & RECTGTRACKMASK)) break; - } - - flashrect(ix, iy, iw, ih, 0); /* turn off rect */ -@@ -276,6 +298,7 @@ - - flashrect(ix, iy, iw, ih, 0); /* turn off rect */ - -+#ifdef DO_GRABFLASH - /* flash the rectangle a bit... */ - for (i=0; i<5; i++) { - flashrect(ix, iy, iw, ih, 1); -@@ -283,13 +306,26 @@ - flashrect(ix, iy, iw, ih, 0); - XFlush(theDisp); Timer(100); - } -+#endif -+ - endflash(); - -+ /* if rectangle has zero width or height, search for child window JPD */ -+ if (iw==0 && ih==0) { -+ int xr, yr; -+ Window childW = 0; -+ if (rW && cW) -+ XTranslateCoordinates(theDisp, rW, cW, rx, ry, &xr, &yr, &childW); -+ if (childW) -+ cW = childW; -+ goto grabwin; -+ } -+ - XUngrabServer(theDisp); - } - -- - /*** -+ *** now that clickWin,ix,iy,iw,ih are known, try to grab the bits : - *** grab screen area (ix,iy,iw,ih) - ***/ - -@@ -303,9 +339,16 @@ - - SetCursors(-1); - -- - exit: - -+ XUngrabPointer(theDisp, CurrentTime); -+ XUngrabServer(theDisp); -+ -+ if (startGrab) { -+ startGrab = 0; -+ if (cancelled) Quit(0); -+ } -+ - if (hidewins) { /* remap XV windows */ - autoclose += 2; /* force it on once */ - if (mainW && dispMode == RMB_WINDOW) { -@@ -1217,7 +1260,3 @@ - - return 1; - } -- -- -- -- -diff -ruN xv-3.10a-bugfixes/xvhips.c xv-3.10a-enhancements/xvhips.c ---- xv-3.10a-bugfixes/xvhips.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvhips.c 2005-04-30 23:49:14.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvhips.c xv-3.10a/xvhips.c +--- xv-3.10a.orig/xvhips.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvhips.c 2005-05-01 01:49:14.000000000 -0500 @@ -0,0 +1,406 @@ +/* + * xvhips.c - load routine for 'HIPS' format pictures @@ -8911,9 +1948,9 @@ diff -ruN xv-3.10a-bugfixes/xvhips.c xv-3.10a-enhancements/xvhips.c +} + +#endif /* HAVE_HIPS */ -diff -ruN xv-3.10a-bugfixes/xvhips.h xv-3.10a-enhancements/xvhips.h ---- xv-3.10a-bugfixes/xvhips.h 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvhips.h 2005-04-25 08:34:14.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvhips.h xv-3.10a/xvhips.h +--- xv-3.10a.orig/xvhips.h 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvhips.h 2005-04-25 10:34:14.000000000 -0500 @@ -0,0 +1,154 @@ +/* + * HIPL Picture Header Format Standard @@ -9069,804 +2106,1339 @@ diff -ruN xv-3.10a-bugfixes/xvhips.h xv-3.10a-enhancements/xvhips.h +#ifndef SIGN +# define SIGN(A,B) (((B) > 0) ? (A) : (-(A))) +#endif /* SIGN */ -diff -ruN xv-3.10a-bugfixes/xvimage.c xv-3.10a-enhancements/xvimage.c ---- xv-3.10a-bugfixes/xvimage.c 2005-03-31 07:23:39.000000000 -0800 -+++ xv-3.10a-enhancements/xvimage.c 2005-04-17 23:00:10.000000000 -0700 -@@ -21,6 +21,16 @@ - * int LoadPad(pinfo, fname); - */ - -+/* The following switch should better be provided at runtime for -+ * comparison purposes. -+ * At the moment it's only compile time, unfortunately. -+ * Who can make adaptions for use as a runtime switch by a menu option? -+ * [GRR 19980607: now via do_fixpix_smooth global; macro renamed to ENABLE_] -+ * [see http://sylvana.net/fixpix/ for home page, further info] -+ */ -+/* #define ENABLE_FIXPIX_SMOOTH */ /* GRR 19980607: moved into xv.h */ -+ -+#define NEEDSDIR /* for S_IRUSR|S_IWUSR */ - #include "copyright.h" - - #include "xv.h" -@@ -36,7 +46,9 @@ - static int doAutoCrop24 PARM((void)); - static void floydDitherize1 PARM((XImage *, byte *, int, int, int, - byte *, byte *,byte *)); -+#if 0 /* NOTUSED */ - static int highbit PARM((unsigned long)); -+#endif - - static int doPadSolid PARM((char *, int, int, int, int)); - static int doPadBggen PARM((char *, int, int, int, int)); -@@ -46,6 +58,267 @@ - static int ReadImageFile1 PARM((char *, PICINFO *)); - - -+/* The following array represents the pixel values for each shade -+ * of the primary color components. -+ * If 'p' is a pointer to a source image rgb-byte-triplet, we can -+ * construct the output pixel value simply by 'oring' together -+ * the corresponding components: +diff -u -r --new-file xv-3.10a.orig/xvjp2k.c xv-3.10a/xvjp2k.c +--- xv-3.10a.orig/xvjp2k.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvjp2k.c 2007-05-13 20:04:37.000000000 -0500 +@@ -0,0 +1,1326 @@ ++/* ++ * xvjp2k.c - I/O subroutines for JPEG 2000 format pictures + * -+ * unsigned char *p; -+ * unsigned long pixval; ++ * This module is a "shim" between XV and a JPEG 2000 CODEC in the open-source ++ * JasPer Library created by Michael D. Adams; for more information, see the URL ++ * "http://www.ece.uvic.ca/~mdadams/jasper". We don't use most of the other ++ * facilities in this library, so it's better to link XV with a UNIX "archive" ++ * representation of it, not a DLL. + * -+ * pixval = screen_rgb[0][*p++]; -+ * pixval |= screen_rgb[1][*p++]; -+ * pixval |= screen_rgb[2][*p++]; ++ * JPEG 2000 files can be represented in either of two general ways: The ++ * simplest representation is a "code stream", which often has a ".jpc" file ++ * name suffix and is organized much like a classical JPEG file, except that ++ * unfortunately, JPEG 2000 code streams indicate the no. of colors in an image ++ * but no longer give any clues about its color space (e.g., RGB or YCbCr). ++ * Instead, there is now a semantically higher-level representation, which often ++ * has a ".jp2" file name suffix and encapsulates a "code stream" with (possibly ++ * a lot of) color-space information, optionally including things like ICC ++ * correction tables. + * -+ * This is both efficient and generic, since the only assumption -+ * is that the primary color components have separate bits. -+ * The order and distribution of bits does not matter, and we -+ * don't need additional variables and shifting/masking code. -+ * The array size is 3 KBytes total and thus very reasonable. -+ */ -+ -+static unsigned long screen_rgb[3][256]; -+ -+/* The following array holds the exact color representations -+ * reported by the system. -+ * This is useful for less than 24 bit deep displays as a base -+ * for additional dithering to get smoother output. -+ */ -+ -+static byte screen_set[3][256]; -+ -+/* The following routine initializes the screen_rgb and screen_set -+ * arrays. -+ * Since it is executed only once per program run, it does not need -+ * to be super-efficient. ++ * Compared to the IJG JPEG Library used in file "xvjpeg.c", one must solve ++ * several problems for color images when marrying JasPer to XV. ++ * ++ * 1. JPEG 2000 files can represent a wide range of image sizes, resolutions, ++ * and color spaces, not all of which can be easily rendered "as is" on a ++ * normal "X Windows" display, so we must carefully check a decoded image's ++ * parameters in order to reject anything that we can't handle gracefully. ++ * ++ * 2. JasPer prefers to decode/encode images using color-plane "slices", instead ++ * of interleaved pixels needed by "X Windows", so we must (de)interleave ++ * copies of the image buffer here. ++ * ++ * XXX Things to do: + * -+ * The method is to draw points in a pixmap with the specified shades -+ * of primary colors and then get the corresponding XImage pixel -+ * representation. -+ * Thus we can get away with any Bit-order/Byte-order dependencies. ++ * 1. In "LoadJP{2,C}()" try to handle the "quick" option, which requests ++ * faster loading of a reduced-size image for the visual schnauzer. The ++ * schnauzer's icon size is currently 80x60, so the old "xvjpeg.c" module tries ++ * to produce a 2X (160x120) image. Can we do the same? + * -+ * The routine uses some global X variables: theDisp, theScreen, -+ * and dispDEEP. Adapt these to your application as necessary. -+ * I've not passed them in as parameters, since for other platforms -+ * than X these may be different (see vfixpix.c), and so the -+ * screen_init() interface is unique. ++ * 2. In "StoreJP2K()", JasPer Library Version 1.701 apparently has no API to ++ * let the XV global "picComments" string be inserted in a JPEG 2000 comment ++ * record. If the library ever gets fixed, enhance our code accordingly. + * -+ * BUG: I've read in the "Xlib Programming Manual" from O'Reilly & -+ * Associates, that the DefaultColormap in TrueColor might not -+ * provide the full shade representation in XAllocColor. -+ * In this case one had to provide a 'best' colormap instead. -+ * However, my tests with Xaccel on a Linux-Box with a Mach64 -+ * card were fully successful, so I leave that potential problem -+ * to you at the moment and would appreciate any suggestions... ++ * --Scott Marovich <marovich@hpl.hp.com>, Hewlett-Packard Laboratories, ++ * January 2005. + */ ++#include "copyright.h" + -+static void screen_init() -+{ -+ static int init_flag; /* assume auto-init as 0 */ -+ Pixmap check_map; -+ GC check_gc; -+ XColor check_col; -+ XImage *check_image; -+ int ci, i; -+ -+ if (init_flag) return; -+ init_flag = 1; -+ -+ check_map = XCreatePixmap(theDisp, RootWindow(theDisp,theScreen), -+ 1, 1, dispDEEP); -+ check_gc = XCreateGC(theDisp, check_map, 0, NULL); -+ for (ci = 0; ci < 3; ci++) { -+ for (i = 0; i < 256; i++) { -+ check_col.red = 0; -+ check_col.green = 0; -+ check_col.blue = 0; -+ /* Do proper upscaling from unsigned 8 bit (image data values) -+ to unsigned 16 bit (X color representation). */ -+ ((unsigned short *)&check_col.red)[ci] = (unsigned short)((i << 8) | i); -+ if (theVisual->class == TrueColor) -+ XAllocColor(theDisp, theCmap, &check_col); -+ else -+ xvAllocColor(theDisp, theCmap, &check_col); -+ screen_set[ci][i] = -+ (((unsigned short *)&check_col.red)[ci] >> 8) & 0xff; -+ XSetForeground(theDisp, check_gc, check_col.pixel); -+ XDrawPoint(theDisp, check_map, check_gc, 0, 0); -+ check_image = XGetImage(theDisp, check_map, 0, 0, 1, 1, -+ AllPlanes, ZPixmap); -+ if (check_image) { -+ switch (check_image->bits_per_pixel) { -+ case 8: -+ screen_rgb[ci][i] = *(CARD8 *)check_image->data; -+ break; -+ case 16: -+ screen_rgb[ci][i] = *(CARD16 *)check_image->data; -+ break; -+ case 24: -+ screen_rgb[ci][i] = -+ ((unsigned long)*(CARD8 *)check_image->data << 16) | -+ ((unsigned long)*(CARD8 *)(check_image->data + 1) << 8) | -+ (unsigned long)*(CARD8 *)(check_image->data + 2); -+ break; -+ case 32: -+ screen_rgb[ci][i] = *(CARD32 *)check_image->data; -+ break; -+ } -+ XDestroyImage(check_image); -+ } -+ } -+ } -+ XFreeGC(theDisp, check_gc); -+ XFreePixmap(theDisp, check_map); -+} ++#define NEEDSARGS ++#include "xv.h" + ++#ifdef HAVE_JP2K ++ ++#include <jasper/jasper.h> ++/* missing prototype in 1.701.0, sigh: */ ++jas_stream_t *jas_stream_freopen PARM((const char *, const char *, FILE *)); ++ ++static const char *fbasename, /* File's base name, for error/warning msgs */ ++ bad_samp[] = "%s: can't read %d-plane %s file!", ++ fmode[] = "rb", ++ full_msg[] = "%s %s. (%ld bytes)", ++ jp2_kind[] = "JP2", ++ jpc_kind[] = "JPEG 2000", ++ load_msg[] = "Loading %dx%d %s %s (%ld bytes)...", ++ no_mem[] = "%s: can't read %s file - out of memory", ++ pixel_size[] = "%s: can't display %d-bit pixels!", ++ shrt_msg[] = "%dx%d %s %s. ", ++ truncated[] = "%s: Unexpected end of %s file", ++ read_err[] = "%s: I/O error reading %s file", ++ bad_dims[] = "%s: error in JPEG-2000 header (bad image size)"; ++ ++/* We only want to override the JasPer Library's "jas_eprintf()" subroutine in ++ order to make it a "wrapper" around XV's own error-reporting subroutine, but ++ because of the way the former is currently packaged in JasPer Library Version ++ 1.701, we must override everything else packaged in the "jas_debug.o" module ++ with it, otherwise we get "duplicate definition" messages from the linker. ++*/ ++int jas_getdbglevel(void) {return 0;} ++int jas_setdbglevel(int n) {return 0;} ++int jas_memdump(FILE *fp,void *data,size_t len) {return 0;} ++ ++int jas_eprintf(const char *fmt,...) /* Handle JasPer Library message */ ++{ ++ static char error[] = "error: ", warning[]= "warning: "; ++ va_list ap; ++ int kind = ISTR_WARNING; ++ char buffer[512]; ++ register char *p; ++ ++ /* Unlike the IJG JPEG Library, the JasPer Library current has no graceful way ++ for an application (= us!) to intercept its diagnostic messages and output ++ them using our own subroutines, so this ugly replacement for its output ++ subroutine will have to suffice. At Version 1.701, lthough the library's ++ own "jas_eprintf()" is a varargs subroutine, all calls currently pass just ++ 1 string with a Line Feed at the end and no "printf(3C)" arguments. Most ++ strings begin with "error: " or "warning: ", although a few have neither. ++ We try to translate these into the format preferred by XV, trimming any ++ trailing Line Feed character (ugh!). ++ */ ++ va_start(ap, fmt); ++ vsnprintf(p = buffer,512,fmt,ap); ++ va_end(ap); ++ while (*p++); ++ if (p[-2] == '\n') p[-2] = '\0'; ++ p = buffer; ++ if (strncmp(p,error,sizeof error) == 0) /* "error: ... " */ ++ { ++ kind = ISTR_WARNING; ++ p += sizeof error; ++ } ++ else /* "warning: ... " */ ++ if (strncmp(p,warning,sizeof warning) == 0) ++ { ++ kind = ISTR_INFO; ++ p += sizeof warning; ++ }; ++ SetISTR(kind,"%s: %s",fbasename,p); ++ return strlen(fmt); ++} ++ ++static char *SetBuf(FILE *f) ++{ ++ char *buf; ++ register char *p; ++ ++ /* JPEG 2000 image files are apt to be large, but the buffer size allocated by ++ most implementations of the "C" Standard I/O Library is still ridiculously ++ small, typically 1 KB. We want to allocate a much larger buffer for higher ++ I/O efficiency, but the details are unfortunately a bit platform-specific. ++ Under UNIX systems with virtual memory, we want to encourage its internal ++ "physio()" subroutine by making the buffer an integral number of pages, ++ aligned on a page-multiple memory address boundary. Under HP-UX 11.1+ and ++ perhaps other operating-systems, a Standard I/O buffer is preceded by a ++ header whose size must also be taken into account. ++ */ ++# ifndef IOBUFSIZ ++# define IOBUFSIZ 65536 ++# endif /* IOBUFSIZ */ ++# ifdef __hpux ++# define OVERHEAD sizeof(mbstate_t) ++# endif /* __hpux */ ++# ifndef OVERHEAD ++# define OVERHEAD 0 ++# endif /* OVERHEAD */ ++ ++# ifdef NBPG ++ if (!(buf = p = malloc(NBPG+OVERHEAD+IOBUFSIZ))) return 0; ++ p = (char *)((unsigned long)p+NBPG-1 & ~(NBPG-1)); ++ p -= OVERHEAD; ++# else /* not NBPG */ ++ if (!(buf = p = malloc(OVERHEAD+IOBUFSIZ))) return 0; ++ p += OVERHEAD; ++# endif /* NBPG */ ++ setvbuf(f,p,_IOFBF,OVERHEAD+IOBUFSIZ); ++ return buf; ++# undef OVERHEAD ++# undef IOBUFSIZ ++} ++ ++int LoadJPC(char *fname,register PICINFO *pinfo,int quick) ++{ ++ jas_image_t *img; ++ jas_stream_t *str; ++ FILE *fp; ++ char *iobuf; ++ const char *s; ++ unsigned long filesize; ++ long w, h, npixels, bufsize; ++ int ok = 0, vstride; ++ register int i; ++ ++ /* Load a JPEG 2000 "code stream" image file into a pixel buffer for XV. ++ Unlike classical JPEG files, they have no clue about the image's color ++ space, so we check for 8-bit data samples but make no effort to check or ++ convert color spaces, and "what you see is what you get". For now, ignore ++ the "quick" option to return a reduced-resolution or -size image. Return 1 ++ on success, or 0 on failure. ++ */ ++ if (!(fp = xv_fopen(fname,fmode))) return 0; ++ fbasename = BaseName(fname); /* Input file's base name, for message(s) */ ++ if (!(iobuf = SetBuf(fp))) ++ { ++ (void)fclose(fp); ++ SetISTR(ISTR_WARNING,no_mem,fbasename,jpc_kind); ++ goto L3; ++ } + -+#ifdef ENABLE_FIXPIX_SMOOTH ++ /* Before telling the JasPer Library about this file, get its size for display ++ purposes. Non-UNIX systems don't necessarily simulate "stat(2)", so do it ++ crudely but portably by seeking to the end, then back to the beginning. ++ */ ++ fseek(fp,0L,2); ++ filesize = ftell(fp); ++ fseek(fp,0L,0); + -+/* The following code is based in part on: -+ * -+ * jquant1.c -+ * -+ * Copyright (C) 1991-1996, Thomas G. Lane. -+ * This file is part of the Independent JPEG Group's software. -+ * For conditions of distribution and use, see the accompanying README file. -+ * -+ * This file contains 1-pass color quantization (color mapping) routines. -+ * These routines provide mapping to a fixed color map using equally spaced -+ * color values. Optional Floyd-Steinberg or ordered dithering is available. ++ /* "jas_stream_close()" will eventually close the input file, so only do it ++ explicitly if no stream can be created: + */ ++ if (!(str = jas_stream_freopen(fname,fmode,fp))) /* nice if prototype... */ ++ { ++ (void)fclose(fp); ++ goto L3; ++ } + -+/* Declarations for Floyd-Steinberg dithering. -+ * -+ * Errors are accumulated into the array fserrors[], at a resolution of -+ * 1/16th of a pixel count. The error at a given pixel is propagated -+ * to its not-yet-processed neighbors using the standard F-S fractions, -+ * ... (here) 7/16 -+ * 3/16 5/16 1/16 -+ * We work left-to-right on even rows, right-to-left on odd rows. -+ * -+ * We can get away with a single array (holding one row's worth of errors) -+ * by using it to store the current row's errors at pixel columns not yet -+ * processed, but the next row's errors at columns already processed. We -+ * need only a few extra variables to hold the errors immediately around the -+ * current column. (If we are lucky, those variables are in registers, but -+ * even if not, they're probably cheaper to access than array elements are.) -+ * -+ * We provide (#columns + 2) entries per component; the extra entry at each -+ * end saves us from special-casing the first and last pixels. ++ /* It's not clear to me whether the following represents a JasPer Library "bug" ++ but it sure looks goofy: Unless a stream buffer is marked "read only", ++ which only happens when the stream's "fillbuf" method is called, even though ++ our buffers are always "read only", the library will try to flush out buffer ++ contents when the stream is destroyed, which makes it die a horrible death. ++ So, mark the stream buffer proactively: + */ ++ str->bufmode_ |= JAS_STREAM_RDBUF; /* We will only read the stream buffer */ ++ if (!(img = jpc_decode(str,0))) goto L2; ++ if ((vstride = jas_image_numcmpts(img))) /* num. color planes */ ++ { + -+typedef INT16 FSERROR; /* 16 bits should be enough */ -+typedef int LOCFSERROR; /* use 'int' for calculation temps */ ++ /* After the image-component streams created, they are left in a "write" ++ state with the streams' cursors positioned at their ends, so "seek" in ++ order to "read" each stream from its beginning. ++ */ ++ i = vstride; ++ while (--i >= 0) ++ if (jas_stream_seek(img->cmpts_[i]->stream_,0L,0)) ++ { ++ SetISTR(ISTR_WARNING,read_err,fbasename,jpc_kind); ++ goto L1; ++ } ++ } ++ w = jas_image_width(img); ++ h = jas_image_height(img); + -+typedef struct { byte *colorset; -+ FSERROR *fserrors; -+ } FSBUF; ++ /* avoid buffer overflow */ ++ npixels = w * h; ++ bufsize = vstride * npixels; ++ if (w <= 0 || h <= 0 || npixels/w != h || bufsize/vstride != npixels) ++ { ++ (void)fclose(fp); ++ SetISTR(ISTR_WARNING,bad_dims,fbasename); ++ goto L1; ++ } ++ pinfo->normw = pinfo->w = w; ++ pinfo->normh = pinfo->h = h; + -+/* Floyd-Steinberg initialization function. -+ * -+ * It is called 'fs2_init' since it's specialized for our purpose and -+ * could be embedded in a more general FS-package. -+ * -+ * Returns a malloced FSBUF pointer which has to be passed as first -+ * parameter to subsequent 'fs2_dither' calls. -+ * The FSBUF structure does not need to be referenced by the calling -+ * application, it can be treated from the app like a void pointer. -+ * -+ * The current implementation does only require to free() this returned -+ * pointer after processing. -+ * -+ * Returns NULL if malloc fails. -+ * -+ * NOTE: The FSBUF structure is designed to allow the 'fs2_dither' -+ * function to work with an *arbitrary* number of color components -+ * at runtime! This is an enhancement over the IJG code base :-). -+ * Only fs2_init() specifies the (maximum) number of components. ++ /* Sanity-check the image's color space and no. of colors. For now, accept ++ only "generic" color spaces, not files needing image-specific color ++ correction, but fix that someday... + */ ++ switch (vstride) ++ { ++ default: ++ SetISTR(ISTR_WARNING,bad_samp,fbasename,vstride,jpc_kind); ++ goto L1; ++ case 1: ++ if ((i = jas_image_cmptprec(img,0)) != 8) /* not 8-bit pixels */ ++ { ++ SetISTR(ISTR_WARNING,pixel_size,fbasename,i); ++ goto L1; ++ } ++ s = "Greyscale"; ++ pinfo->type = PIC8; ++ pinfo->colType = F_GREYSCALE; ++ i = 256; /* Return fake indexed-color "map" */ ++ while (--i >= 0) pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; ++ break; ++ case 3: ++ ++ /* BEWARE OF KLUDGE: If the image's color space is RGB, assume that the ++ data-sample precision for all color planes is the ++ same. If the color space is YCbCr, assume the luminance (Y = 0th) ++ component has the greatest precision, although the chrominance ++ (Cr = 1st, Cb = 2nd) components are usually sub-sampled. ++ */ ++ if ((i = jas_image_cmptprec(img,0)) != 8) /* not 24-bit pixels */ ++ { ++ SetISTR(ISTR_WARNING,pixel_size,fbasename,i*3); ++ goto L1; ++ } ++ s = "Color"; ++ pinfo->type = PIC24; ++ pinfo->colType = F_FULLCOLOR; ++ ++ /* XXX Unlike the IJG JPEG Library, the JasPer Library is apparently ++ unable to quantize colors or tell us whether the image's colors ++ were quantized by its creator, so it seems that we can't return a ++ color map for XV to potentially use 8-bit indexed color. If there ++ *is* an easy way to do it that escapes me, put the code here someday. ++ */ ++ } ++ if (!(pinfo->pic = (byte *)malloc(bufsize))) /* image buffer for XV */ ++ { ++ SetISTR(ISTR_WARNING,no_mem,fbasename,jpc_kind); ++ goto L1; ++ } ++ pinfo->frmType = F_JPC; ++ sprintf(pinfo->fullInfo,full_msg,s,jpc_kind,filesize); ++ sprintf(pinfo->shrtInfo,shrt_msg,pinfo->w,pinfo->h,s,jpc_kind); ++ SetISTR(ISTR_INFO,load_msg,pinfo->normw,pinfo->normh,s,jpc_kind,filesize); ++ if (vstride == 1) /* gray-scale image */ ++ { register jas_stream_t *c = img->cmpts_[0]->stream_; ++ register byte *p = pinfo->pic; ++ ++ /* Since this is a 1-plane image, avoid a lot of errant nonsense in the ++ JasPer Library by sequentially reading all of the data into our buffer ++ directly. ++ */ ++ do if ((i = (*c->ops_->read_)(c->obj_,(char *)p,bufsize)) <= 0) ++ { ++ SetISTR(ISTR_WARNING,i < 0 ? read_err : truncated,fbasename, ++ jpc_kind); ++ goto L1; ++ } ++ while ((p += i),(bufsize -= i) > 0); ++ } ++ else /* RGB color image */ ++ { + -+static FSBUF *fs2_init(width) -+int width; ++ /* Reading color images is inefficient because JPEG 2000 wants to partition ++ file data into separate image planes (colors), while XV wants data ++ samples from each plane to be interleaved as 3-byte pixels. Apparently ++ the fastest method consists of 3 passes through the XV image buffer, ++ into which we insert the bytes of each component. ++ */ ++ i = 0; ++ do /* each color component */ ++ { long npix = npixels; ++ register jas_stream_t *c = img->cmpts_[i]->stream_; ++ register byte *p = pinfo->pic + i; ++ ++ do /* each pixel */ ++ { register int b; ++ ++ if ((b = jas_stream_getc(c)) < 0) ++ { ++ SetISTR(ISTR_WARNING, ++ (c->flags_ & JAS_STREAM_EOF) ? truncated : read_err, ++ fbasename,jpc_kind); ++ goto L1; ++ } ++ *p = b; ++ } ++ while ((p += 3),--npix > 0); ++ } ++ while (++i <= 2); ++ } ++ ok = 1; /* Success! */ ++L1: jas_image_destroy(img); ++L2: (void)jas_stream_close(str); ++ free(iobuf); ++L3: return ok; ++} ++ ++int LoadJP2(char *fname,register PICINFO *pinfo,int quick) +{ -+ FSBUF *fs; -+ FSERROR *p; ++ jas_image_t *img; ++ jas_stream_t *str; ++ FILE *fp; ++ char *iobuf; ++ const char *s; ++ unsigned long filesize; ++ long w, h, npixels, bufsize; ++ int ok = 0, vstride; ++ register int i; ++ ++ /* Load a JPEG 2000 JP2 image file into a pixel buffer for XV, doing any ++ necessary color-space conversion to end up with 8-bit gray scale or 24-bit ++ RGB. For now, ignore the "quick" option to return a reduced-resolution ++ or -size image. Return 1 on success, or 0 on failure. ++ */ ++ if (!(fp = xv_fopen(fname,fmode))) return 0; ++ fbasename = BaseName(fname); /* Input file's base name, for message(s) */ ++ if (!(iobuf = SetBuf(fp))) ++ { ++ (void)fclose(fp); ++ SetISTR(ISTR_WARNING,no_mem,fbasename,jpc_kind); ++ goto L3; ++ } + -+ fs = (FSBUF *) -+ malloc(sizeof(FSBUF) * 3 + ((size_t)width + 2) * sizeof(FSERROR) * 3); -+ if (fs == 0) return fs; ++ /* Before telling the JasPer Library about this file, get its size for display ++ purposes. Non-UNIX systems don't necessarily simulate "stat(2)", so do it ++ crudely but portably by seeking to the end, then back to the beginning. ++ */ ++ fseek(fp,0L,2); ++ filesize = ftell(fp); ++ fseek(fp,0L,0); + -+ fs[0].colorset = screen_set[0]; -+ fs[1].colorset = screen_set[1]; -+ fs[2].colorset = screen_set[2]; ++ /* "jas_stream_close()" will eventually close the input file, so only do it ++ explicitly if no stream can be created: ++ */ ++ if (!(str = jas_stream_freopen(fname,fmode,fp))) ++ { ++ (void)fclose(fp); ++ goto L3; ++ } + -+ p = (FSERROR *)(fs + 3); -+ memset(p, 0, ((size_t)width + 2) * sizeof(FSERROR) * 3); ++ /* It's not clear to me whether the following represents a JasPer Library "bug" ++ but it sure looks goofy: Unless a stream buffer is marked "read only", ++ which only happens when the stream's "fillbuf" method is called, even though ++ our buffers are always "read only", the library will try to flush out buffer ++ contents when the stream is destroyed, which makes it die a horrible death. ++ So, mark the stream buffer proactively: ++ */ ++ str->bufmode_ |= JAS_STREAM_RDBUF; /* We will only read the stream buffer */ ++ if (!(img = jp2_decode(str,0))) goto L2; ++ if ((vstride = jas_image_numcmpts(img))) /* num. color planes */ ++ { + -+ fs[0].fserrors = p; -+ fs[1].fserrors = p + 1; -+ fs[2].fserrors = p + 2; ++ /* After the image-component streams created, they are left in a "write" ++ state with the streams' cursors positioned at their ends, so "seek" in ++ order to "read" each stream from its beginning. ++ */ ++ i = vstride; ++ while (--i >= 0) ++ if (jas_stream_seek(img->cmpts_[i]->stream_,0L,0)) ++ { ++ SetISTR(ISTR_WARNING,read_err,fbasename,jp2_kind); ++ goto L1; ++ } ++ } ++ w = jas_image_width(img); ++ h = jas_image_height(img); + -+ return fs; -+} ++ /* avoid buffer overflow */ ++ npixels = w * h; ++ bufsize = vstride * npixels; ++ if (w <= 0 || h <= 0 || npixels/w != h || bufsize/vstride != npixels) ++ { ++ (void)fclose(fp); ++ SetISTR(ISTR_WARNING,bad_dims,fbasename); ++ goto L1; ++ } ++ pinfo->normw = pinfo->w = w; ++ pinfo->normh = pinfo->h = h; + -+/* Floyd-Steinberg dithering function. -+ * -+ * NOTE: -+ * (1) The image data referenced by 'ptr' is *overwritten* (input *and* -+ * output) to allow more efficient implementation. -+ * (2) Alternate FS dithering is provided by the sign of 'nc'. Pass in -+ * a negative value for right-to-left processing. The return value -+ * provides the right-signed value for subsequent calls! -+ * (3) This particular implementation assumes *no* padding between lines! -+ * Adapt this if necessary. ++ /* Sanity-check the image's color space and no. of colors. For now, accept ++ only "generic" color spaces, not files needing image-specific color ++ correction, but fix that someday... + */ ++ switch (vstride) ++ { static char color_space[]={"%s: invalid color space!"}; ++ ++ default: ++ SetISTR(ISTR_WARNING,bad_samp,fbasename,vstride,jp2_kind); ++ goto L1; ++ case 1: ++ if ( !jas_clrspc_isunknown(i = jas_image_clrspc(img)) ++ && jas_clrspc_fam(i) != JAS_CLRSPC_FAM_GRAY ++ ) ++ { ++ SetISTR(ISTR_WARNING,color_space,fbasename); ++ goto L1; ++ } ++ if ((i = jas_image_cmptprec(img,0)) != 8) /* not 8-bit pixels */ ++ { ++ SetISTR(ISTR_WARNING,pixel_size,fbasename,i); ++ goto L1; ++ } ++ s = "Greyscale"; ++ pinfo->type = PIC8; ++ pinfo->colType = F_GREYSCALE; ++ i = 256; /* Return fake indexed-color "map" */ ++ while (--i >= 0) pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; ++ break; ++ case 3: ++ if (jas_clrspc_isunknown(i = jas_image_clrspc(img))) ++ { ++ SetISTR(ISTR_WARNING,color_space,fbasename); ++ goto L1; ++ } ++ if (jas_clrspc_fam(i) != JAS_CLRSPC_FAM_RGB) ++ { jas_image_t *oimg; ++ jas_cmprof_t *profile; ++ ++ /* Here's where the JasPer Library really shines. The only color ++ space that XV handles is RGB, so if that's not what our image ++ uses, then to quote Capt. Kirk: "Make it so!" ++ */ ++ if (!(profile = jas_cmprof_createfromclrspc(JAS_CLRSPC_SRGB))) ++ { ++ SetISTR(ISTR_WARNING,"%s: can't create RGB profile", ++ fbasename); ++ goto L1; ++ } ++ img = jas_image_chclrspc( oimg = img ++ , profile ++ , JAS_CMXFORM_INTENT_PER ++ ); ++ jas_cmprof_destroy(profile); ++ if (!img) /* Oops! We failed, so restore original image */ ++ { ++ img = oimg; ++ SetISTR(ISTR_WARNING,"%s: can't convert to RGB",fbasename); ++ goto L1; ++ } ++ jas_image_destroy(oimg); ++ } + -+static int fs2_dither(fs, ptr, nc, num_rows, num_cols) -+FSBUF *fs; -+byte *ptr; -+int nc, num_rows, num_cols; -+{ -+ int abs_nc, ci, row, col; -+ LOCFSERROR delta, cur, belowerr, bpreverr; -+ byte *dataptr, *colsetptr; -+ FSERROR *errorptr; -+ -+ if ((abs_nc = nc) < 0) abs_nc = -abs_nc; -+ for (row = 0; row < num_rows; row++) { -+ for (ci = 0; ci < abs_nc; ci++, ptr++) { -+ dataptr = ptr; -+ colsetptr = fs[ci].colorset; -+ errorptr = fs[ci].fserrors; -+ if (nc < 0) { -+ dataptr += (num_cols - 1) * abs_nc; -+ errorptr += (num_cols + 1) * abs_nc; ++ /* BEWARE OF KLUDGE: If the image's color space is RGB, assume that the ++ data-sample precision for all color planes is the ++ same. If the color space is YCbCr, assume the luminance (Y = 0th) ++ component has the greatest precision, although the chrominance ++ (Cr = 1st, Cb = 2nd) components are usually sub-sampled. ++ */ ++ if ((i = jas_image_cmptprec(img,0)) != 8) /* not 24-bit pixels */ ++ { ++ SetISTR(ISTR_WARNING,pixel_size,fbasename,i*3); ++ goto L1; ++ } ++ s = "Color"; ++ pinfo->type = PIC24; ++ pinfo->colType = F_FULLCOLOR; ++ ++ /* XXX Unlike the IJG JPEG Library, the JasPer Library is apparently ++ unable to quantize colors or tell us whether the image's colors ++ were quantized by its creator, so it seems that we can't return a ++ color map for XV to potentially use 8-bit indexed color. If there ++ *is* an easy way to do it that escapes me, put the code here someday. ++ */ + } -+ cur = belowerr = bpreverr = 0; -+ for (col = 0; col < num_cols; col++) { -+ cur += errorptr[nc]; -+ cur += 8; cur >>= 4; -+ if ((cur += *dataptr) < 0) cur = 0; -+ else if (cur > 255) cur = 255; -+ *dataptr = cur & 0xff; -+ cur -= colsetptr[cur]; -+ delta = cur << 1; cur += delta; -+ bpreverr += cur; cur += delta; -+ belowerr += cur; cur += delta; -+ errorptr[0] = (FSERROR)bpreverr; -+ bpreverr = belowerr; -+ belowerr = delta >> 1; -+ dataptr += nc; -+ errorptr += nc; ++ if (!(pinfo->pic = (byte *)malloc(bufsize))) /* image buffer for XV */ ++ { ++ SetISTR(ISTR_WARNING,no_mem,fbasename,jp2_kind); ++ goto L1; + } -+ errorptr[0] = (FSERROR)bpreverr; -+ } -+ ptr += (num_cols - 1) * abs_nc; -+ nc = -nc; -+ } -+ return nc; -+} -+ -+#endif /* ENABLE_FIXPIX_SMOOTH */ -+ - - #define DO_CROP 0 - #define DO_ZOOM 1 -@@ -1348,7 +1621,7 @@ - SetISTR(ISTR_WARNING, "Invalid image dimensions for dithering"); - return (byte *)NULL; - } -- -+ - outpic = (byte *) malloc((size_t) npixels); - if (!outpic) return outpic; - -@@ -1838,7 +2111,7 @@ - unsigned int wide, high; - { - /* -- * this has to do the none-to-simple bit of converting the data in 'pic24' -+ * This has to do the none-too-simple bit of converting the data in 'pic24' - * into something usable by X. - * - * There are two major approaches: if we're displaying on a TrueColor -@@ -1852,7 +2125,7 @@ - * mode. (In that by this point, a 3/3/2 standard colormap has been - * created for our use (though all 256 colors may not be unique...), and - * we're just going to display the 24-bit picture by dithering with those -- * colors -+ * colors.) - * - */ - -@@ -1890,33 +2163,17 @@ - /* Non-ColorMapped Visuals: TrueColor, DirectColor */ - /************************************************************************/ - -- unsigned long r, g, b, rmask, gmask, bmask, xcol; -- int rshift, gshift, bshift, bperpix, bperline, border, cshift; -- int maplen; -+ unsigned long xcol; -+ int bperpix, bperline; - byte *imagedata, *lip, *ip, *pp; - - -- /* compute various shifting constants that we'll need... */ -- -- rmask = theVisual->red_mask; -- gmask = theVisual->green_mask; -- bmask = theVisual->blue_mask; -- -- rshift = 7 - highbit(rmask); -- gshift = 7 - highbit(gmask); -- bshift = 7 - highbit(bmask); -- -- maplen = theVisual->map_entries; -- if (maplen>256) maplen=256; -- cshift = 7 - highbit((u_long) (maplen-1)); -- - xim = XCreateImage(theDisp, theVisual, dispDEEP, ZPixmap, 0, NULL, - wide, high, 32, 0); - if (!xim) FatalError("couldn't create X image!"); - - bperline = xim->bytes_per_line; - bperpix = xim->bits_per_pixel; -- border = xim->byte_order; - - imagedata = (byte *) malloc((size_t) (high * bperline)); - if (!imagedata) FatalError("couldn't malloc imagedata"); -@@ -1930,85 +2187,141 @@ - FatalError(buf); - } - -+ screen_init(); - -- lip = imagedata; pp = pic24; -- for (i=0; i<high; i++, lip+=bperline) { -- for (j=0, ip=lip; j<wide; j++) { -- r = *pp++; g = *pp++; b = *pp++; -- -- /* shift r,g,b so that high bit of 8-bit color specification is -- * aligned with high bit of r,g,b-mask in visual, -- * AND each component with its mask, -- * and OR the three components together -- */ -- -- if (theVisual->class == DirectColor) { -- r = (u_long) directConv[(r>>cshift) & 0xff] << cshift; -- g = (u_long) directConv[(g>>cshift) & 0xff] << cshift; -- b = (u_long) directConv[(b>>cshift) & 0xff] << cshift; -- } -- -- -- /* shift the bits around */ -- if (rshift<0) r = r << (-rshift); -- else r = r >> rshift; -- -- if (gshift<0) g = g << (-gshift); -- else g = g >> gshift; -- -- if (bshift<0) b = b << (-bshift); -- else b = b >> bshift; -- -- r = r & rmask; -- g = g & gmask; -- b = b & bmask; -- -- xcol = r | g | b; -- -- if (bperpix == 32) { -- if (border == MSBFirst) { -- *ip++ = (xcol>>24) & 0xff; -- *ip++ = (xcol>>16) & 0xff; -- *ip++ = (xcol>>8) & 0xff; -- *ip++ = xcol & 0xff; -- } -- else { /* LSBFirst */ -- *ip++ = xcol & 0xff; -- *ip++ = (xcol>>8) & 0xff; -- *ip++ = (xcol>>16) & 0xff; -- *ip++ = (xcol>>24) & 0xff; -- } -- } -- -- else if (bperpix == 24) { -- if (border == MSBFirst) { -- *ip++ = (xcol>>16) & 0xff; -- *ip++ = (xcol>>8) & 0xff; -- *ip++ = xcol & 0xff; -- } -- else { /* LSBFirst */ -- *ip++ = xcol & 0xff; -- *ip++ = (xcol>>8) & 0xff; -- *ip++ = (xcol>>16) & 0xff; -- } -- } -+#ifdef ENABLE_FIXPIX_SMOOTH -+ if (do_fixpix_smooth) { -+#if 0 -+ /* If we wouldn't have to save the original pic24 image data, -+ * the following code would do the dither job by overwriting -+ * the image data, and the normal render code would then work -+ * without any change on that data. -+ * Unfortunately, this approach would hurt the xv assumptions... -+ */ -+ if (bperpix < 24) { -+ FSBUF *fs = fs2_init(wide); -+ if (fs) { -+ fs2_dither(fs, pic24, 3, high, wide); -+ free(fs); -+ } ++ pinfo->frmType = F_JP2; ++ sprintf(pinfo->fullInfo,full_msg,s,jp2_kind,filesize); ++ sprintf(pinfo->shrtInfo,shrt_msg,pinfo->w,pinfo->h,s,jp2_kind); ++ SetISTR(ISTR_INFO,load_msg,pinfo->normw,pinfo->normh,s,jp2_kind,filesize); ++ if (vstride == 1) /* gray-scale image */ ++ { register jas_stream_t *c = img->cmpts_[0]->stream_; ++ register byte *p = pinfo->pic; ++ ++ /* Since this is a 1-plane image, avoid a lot of errant nonsense in the ++ JasPer Library by sequentially reading all of the data into our buffer ++ directly. ++ */ ++ do if ((i = (*c->ops_->read_)(c->obj_,(char *)p,bufsize)) <= 0) ++ { ++ SetISTR(ISTR_WARNING,i < 0 ? read_err : truncated,fbasename, ++ jp2_kind); ++ goto L1; ++ } ++ while ((p += i),(bufsize -= i) > 0); + } -+#else -+ /* ...so we have to take a different approach with linewise -+ * dithering/rendering in a loop using a temporary line buffer. -+ */ -+ if (bperpix < 24) { -+ FSBUF *fs = fs2_init(wide); -+ if (fs) { -+ byte *row_buf = malloc((size_t)wide * 3); -+ if (row_buf) { -+ int nc = 3; -+ byte *picp = pic24; lip = imagedata; -+ -+ switch (bperpix) { -+ case 8: -+ for (i=0; i<high; i++, lip+=bperline, picp+=(size_t)wide*3) { -+ memcpy(row_buf, picp, (size_t)wide * 3); -+ nc = fs2_dither(fs, row_buf, nc, 1, wide); -+ for (j=0, ip=lip, pp=row_buf; j<wide; j++) { -+ xcol = screen_rgb[0][*pp++]; -+ xcol |= screen_rgb[1][*pp++]; -+ xcol |= screen_rgb[2][*pp++]; -+ *ip++ = xcol & 0xff; -+ } -+ } -+ break; ++ else /* RGB color image */ ++ { + -+ case 16: -+ for (i=0; i<high; i++, lip+=bperline, picp+=(size_t)wide*3) { -+ CARD16 *ip16 = (CARD16 *)lip; -+ memcpy(row_buf, picp, (size_t)wide * 3); -+ nc = fs2_dither(fs, row_buf, nc, 1, wide); -+ for (j=0, pp=row_buf; j<wide; j++) { -+ xcol = screen_rgb[0][*pp++]; -+ xcol |= screen_rgb[1][*pp++]; -+ xcol |= screen_rgb[2][*pp++]; -+ *ip16++ = (CARD16)xcol; -+ } -+ } -+ break; -+ } /* end switch */ -+ -+ free(row_buf); -+ free(fs); - -- else if (bperpix == 16) { -- if (border == MSBFirst) { -- *ip++ = (xcol>>8) & 0xff; -- *ip++ = xcol & 0xff; -- } -- else { /* LSBFirst */ -- *ip++ = xcol & 0xff; -- *ip++ = (xcol>>8) & 0xff; -+ return xim; - } -- } -- -- else if (bperpix == 8) { -- *ip++ = xcol & 0xff; -- } -+ free(fs); -+ } - } -+#endif /* 0? */ - } -+#endif /* ENABLE_FIXPIX_SMOOTH */ -+ -+ lip = imagedata; pp = pic24; -+ -+ switch (bperpix) { -+ case 8: -+ for (i=0; i<high; i++, lip+=bperline) { -+ for (j=0, ip=lip; j<wide; j++) { -+ xcol = screen_rgb[0][*pp++]; -+ xcol |= screen_rgb[1][*pp++]; -+ xcol |= screen_rgb[2][*pp++]; -+ *ip++ = xcol & 0xff; ++ /* Reading color images is inefficient because JPEG 2000 wants to partition ++ file data into separate image planes (colors), while XV wants data ++ samples from each plane to be interleaved as 3-byte pixels. Apparently ++ the fastest method consists of 3 passes through the XV image buffer, ++ into which we insert the bytes of each component. ++ */ ++ i = 0; ++ do /* each color component */ ++ { long npix = npixels; ++ register jas_stream_t *c = img->cmpts_[i]->stream_; ++ register byte *p = pinfo->pic + i; ++ ++ do /* each pixel */ ++ { register int b; ++ ++ if ((b = jas_stream_getc(c)) < 0) ++ { ++ SetISTR(ISTR_WARNING, ++ (c->flags_ & JAS_STREAM_EOF) ? truncated : read_err, ++ fbasename,jp2_kind); ++ goto L1; ++ } ++ *p = b; ++ } ++ while ((p += 3),--npix > 0); + } -+ } -+ break; ++ while (++i <= 2); ++ } ++ ok = 1; /* Success! */ ++L1: jas_image_destroy(img); ++L2: (void)jas_stream_close(str); ++ free(iobuf); ++L3: return ok; ++} ++ ++/* The following variables and subroutines are used when writing a JPEG 2000 ++ file, which is done mainly using call-backs from "X Windows" widgets. The ++ most complicated part of this interface is: managing interactions with a ++ window to request the boat-loads of options that the JasPer Library supports. ++ Start by defining subwindow sizes, plus indices into several arrays of ++ corresponding widget-state variables. ++ ++ IMPLEMENTATION NOTES: The following dimensions create a tall, thin window ++ which appears to have considerable empty space at the ++ bottom. Before you complain, click the Precinct Height menu button in order ++ to the tall pop-up subwindow that it generates. If the parent window is made ++ shorter, then this pop-up will be clipped, which is an ugly nuisance. I ++ don't know how to make the pop-up visible outside its parent's borders; do ++ you? If there's some way to make "X Windows" do this, then we might consider ++ making the parent shorter. ++ ++ Note that there is currently no mechanism to program the no. of intermediate ++ layers used by the encoder, or their rates. This is potentially a large and ++ complicated data-entry problem, and perhaps someday we can invent a clever ++ solution using the rest of the parent window's space. ++*/ ++# define JP2KW 275 /* Window width, in pixels */ ++# define JP2KH 400 /* Window height, in pixels */ ++# define BUTTW 51 /* Button width, in pixels (odd for half-toning) */ ++# define BUTTH 20 /* Button height, in pixels */ ++# define MENUW 75 /* Menu-button width, in pixels (odd for half-toning) */ ++# define MENUH 24 /* Menu-button height, in pixels */ ++# define RBUTH 20 /* Radio button height, in pixels */ ++# define RBUTW 51 /* Radio button width, in pixels (odd for half-toning) */ ++# define TEXTH (LINEHIGH+5) /* Text subwindow height, in pixels */ ++# define TEXTW 75 /* Text subwindow width, in pixels */ ++ ++# define J_BOK 0 /* Boolean "Ok" button */ ++# define J_BCANC 1 /* Boolean "Cancel" button */ ++# define J_NBUTT 2 /* No. of regular button widgets */ ++ ++# define J_CSOP 0 /* Boolean encoding-style option buttons */ ++# define J_CEPH 1 ++# define J_CLAZY 2 ++# define J_CTERM 3 ++# define J_CSEGS 4 ++# define J_CVCAU 5 ++# define J_CPTRM 6 ++# define J_CRSTP 7 ++# define J_NCHKB 8 /* No. of check-box button widgets */ ++ ++# define J_MCBXW 0 /* 1-of-N menu-selection buttons */ ++# define J_MCBXH 1 ++# define J_MPREW 2 ++# define J_MPREH 3 ++# define J_MPROG 4 ++# define J_NMENU 5 /* No. of menu-button widgets */ ++ ++# define J_TGBIT 0 /* (Unsigned numeric) string subwindows */ ++# define J_TRES 1 ++# define J_TRATE 2 ++# define J_NTEXT 3 /* No. of text subwindows */ ++ ++static BUTT button[J_NBUTT]; ++static CBUTT chkbut[J_NCHKB]; ++static MBUTT menu[J_NMENU]; ++static RBUTT *radio; ++static Window text[J_NTEXT]; ++static int colorType, format, textval[J_NTEXT]; ++static const char *ProgList[]={"lrcp","rlcp","rpcl","pcrl","cprl"}; ++ ++void CreateJP2KW(void) ++{ ++ static const char EXP2_0[] ={ "1"}, /* Successive powers of 2 */ ++ EXP2_1[] ={ "2"}, ++ EXP2_2[] ={ "4"}, ++ EXP2_3[] ={ "8"}, ++ EXP2_4[] ={ "16"}, ++ EXP2_5[] ={ "32"}, ++ EXP2_6[] ={ "64"}, ++ EXP2_7[] ={ "128"}, ++ EXP2_8[] ={ "256"}, ++ EXP2_9[] ={ "512"}, ++ EXP2_10[]={ "1024"}, ++ EXP2_11[]={ "2048"}, ++ EXP2_12[]={ "4096"}, ++ EXP2_13[]={ "8192"}, ++ EXP2_14[]={"16384"}, ++ EXP2_15[]={"32768"}; ++ static const char *CBoxList[]= ++ { ++ EXP2_1 ,EXP2_2 ,EXP2_3 ,EXP2_4 ,EXP2_5,EXP2_6 ,EXP2_7 ,EXP2_8 ,EXP2_9, ++ EXP2_10,EXP2_11 ++ }; ++ static const char *PrecList[]= ++ { ++ EXP2_0,EXP2_1,EXP2_2 ,EXP2_3 ,EXP2_4 ,EXP2_5 ,EXP2_6 ,EXP2_7 , ++ EXP2_8,EXP2_9,EXP2_10,EXP2_11,EXP2_12,EXP2_13,EXP2_14,EXP2_15 ++ }; ++ static const char hstr[]={"Height"}, wstr[]={"Width"}; ++ ++ if (!(jp2kW = CreateWindow( "xvjp2k" ++ , "XVjp2k" ++ , 0 ++ , JP2KW ++ , JP2KH ++ , infofg ++ , infobg ++ , 0 ++ ) ++ ) ++ ) FatalError("can't create JPEG 2000 window!"); ++ XSelectInput(theDisp,jp2kW,ExposureMask|ButtonPressMask|KeyPressMask); ++ ++ /* Create a row of 2 boolean-valued, regular buttons ("Ok" and "Cancel") in the ++ window's bottom right corner. ++ */ ++ BTCreate(&button[J_BOK ],jp2kW, ++ JP2KW-2*BUTTW-20,JP2KH-10-BUTTH-1,BUTTW,BUTTH, ++ "Ok" ,infofg,infobg,hicol,locol); ++ BTCreate(&button[J_BCANC],jp2kW, ++ JP2KW- BUTTW-10,JP2KH-10-BUTTH-1,BUTTW,BUTTH, ++ "Cancel",infofg,infobg,hicol,locol); ++ ++ /* Create a vertical column of 8 boolean-valued, check-box buttons (for ++ encoding-style options) down the window's left side. ++ */ ++ CBCreate(&chkbut[J_CSOP] ,jp2kW, ++ 10,10+ASCENT+SPACING+2*LINEHIGH+0*BUTTH, ++ "sop" ,infofg,infobg,hicol,locol); ++ CBCreate(&chkbut[J_CEPH] ,jp2kW, ++ 10,10+ASCENT+SPACING+2*LINEHIGH+1*BUTTH, ++ "eph" ,infofg,infobg,hicol,locol); ++ CBCreate(&chkbut[J_CLAZY],jp2kW, ++ 10,10+ASCENT+SPACING+2*LINEHIGH+2*BUTTH, ++ "lazy" ,infofg,infobg,hicol,locol); ++ CBCreate(&chkbut[J_CTERM],jp2kW, ++ 10,10+ASCENT+SPACING+2*LINEHIGH+3*BUTTH, ++ "termall" ,infofg,infobg,hicol,locol); ++ CBCreate(&chkbut[J_CSEGS],jp2kW, ++ 10,10+ASCENT+SPACING+2*LINEHIGH+4*BUTTH, ++ "segsym" ,infofg,infobg,hicol,locol); ++ CBCreate(&chkbut[J_CVCAU],jp2kW, ++ 10,10+ASCENT+SPACING+2*LINEHIGH+5*BUTTH, ++ "vcausal" ,infofg,infobg,hicol,locol); ++ CBCreate(&chkbut[J_CPTRM],jp2kW, ++ 10,10+ASCENT+SPACING+2*LINEHIGH+6*BUTTH, ++ "pterm" ,infofg,infobg,hicol,locol); ++ CBCreate(&chkbut[J_CRSTP],jp2kW, ++ 10,10+ASCENT+SPACING+2*LINEHIGH+7*BUTTH, ++ "resetprob",infofg,infobg,hicol,locol); ++ /* Create text subwindows for unsigned decimal integer values. */ ++ ++ text[J_TGBIT] = XCreateSimpleWindow(theDisp,jp2kW, ++ JP2KW-TEXTW-10,10+ASCENT+SPACING+2*LINEHIGH+3*MENUH+0*TEXTH,TEXTW,TEXTH, ++ 1,infofg,infobg); ++ XSelectInput(theDisp,text[J_TGBIT],ExposureMask|KeyPressMask); ++ text[J_TRES ] = XCreateSimpleWindow(theDisp,jp2kW, ++ JP2KW-TEXTW-10,10+ASCENT+SPACING+2*LINEHIGH+3*MENUH+1*TEXTH,TEXTW,TEXTH, ++ 1,infofg,infobg); ++ XSelectInput(theDisp,text[J_TRES ],ExposureMask|KeyPressMask); ++ text[J_TRATE] = XCreateSimpleWindow(theDisp,jp2kW, ++ JP2KW-TEXTW-10,10+ASCENT+SPACING+2*LINEHIGH+3*MENUH+2*TEXTH,TEXTW,TEXTH, ++ 1,infofg,infobg); ++ XSelectInput(theDisp,text[J_TRATE],ExposureMask|KeyPressMask); ++ ++ /* Create a row of 2 boolean-valued radio buttons (for the "Rate" subwindow ++ value's unit of measure). The 1st button is "selected" by default. ++ */ ++ radio = RBCreate(0,jp2kW, ++ JP2KW-19*RBUTW/8-10,10+ASCENT+SPACING+2*LINEHIGH+3*MENUH+3*TEXTH+4, ++ "Percent",infofg,infobg,hicol,locol); ++ (void)RBCreate(radio,jp2kW, ++ JP2KW-1*RBUTW-10 ,10+ASCENT+SPACING+2*LINEHIGH+3*MENUH+3*TEXTH+4, ++ "Bytes",infofg,infobg,hicol,locol); ++ ++ /* Create pop-up menu-selection buttons after mapping the above subwindows, ++ since we don't want the pop-up menus mapped unless the corresponding button ++ is selected. ++ */ ++ XMapSubwindows(theDisp,jp2kW); ++ MBCreate(&menu[J_MCBXW],jp2kW, ++ JP2KW-2*MENUW-10,10+ASCENT+SPACING+2*LINEHIGH+0*MENUH,MENUW,MENUH, ++ wstr ,CBoxList,sizeof CBoxList/sizeof *CBoxList,infofg,infobg, ++ hicol,locol); ++ MBCreate(&menu[J_MCBXH],jp2kW, ++ JP2KW-2*MENUW-10,10+ASCENT+SPACING+2*LINEHIGH+1*MENUH,MENUW,MENUH, ++ hstr ,CBoxList,sizeof CBoxList/sizeof *CBoxList,infofg,infobg, ++ hicol,locol); ++ MBCreate(&menu[J_MPREW],jp2kW, ++ JP2KW-1*MENUW-10,10+ASCENT+SPACING+2*LINEHIGH+0*MENUH,MENUW,MENUH, ++ wstr ,PrecList,sizeof PrecList/sizeof *PrecList,infofg,infobg, ++ hicol,locol); ++ MBCreate(&menu[J_MPREH],jp2kW, ++ JP2KW-1*MENUW-10,10+ASCENT+SPACING+2*LINEHIGH+1*MENUH,MENUW,MENUH, ++ hstr ,PrecList,sizeof PrecList/sizeof *PrecList,infofg,infobg, ++ hicol,locol); ++ MBCreate(&menu[J_MPROG],jp2kW, ++ JP2KW-1*MENUW-10,10+ASCENT+SPACING+2*LINEHIGH+2*MENUH,MENUW,MENUH, ++ "Order",ProgList,sizeof ProgList/sizeof *ProgList,infofg,infobg, ++ hicol,locol); ++ ++ /* Initialize values represented by widgets, which should correspond to default ++ compiled into the JasPer Library. Unfortunately, as of Version 1.701 there ++ is no easy way for an application to extract these from the library, so the ++ following code might get out of sync over time: ++ */ ++ menu[J_MCBXW].hascheck = 1; menu[J_MCBXW].flags[ 5] = 1; ++ menu[J_MCBXH].hascheck = 1; menu[J_MCBXH].flags[ 5] = 1; ++ menu[J_MPREW].hascheck = 1; menu[J_MPREW].flags[15] = 1; ++ menu[J_MPREH].hascheck = 1; menu[J_MPREH].flags[15] = 1; ++ menu[J_MPROG].hascheck = 1; menu[J_MPROG].flags[ 0] = 1; ++ textval[J_TGBIT] = 2; /* No. of guard bits */ ++ textval[J_TRES ] = 6; /* Max. no. of resolution levels */ ++ textval[J_TRATE] = 100; /* Rate = 100% */ ++} ++ ++void JP2KSaveParams(int fmt,char *fname,int col) /* Save output-file parms */ ++{ ++ format = fmt; /* Desired file format: F_JPC|F_JP2 */ ++ fbasename = fname; /* ->Output file path */ ++ colorType = col; /* Desired color space: F_GREYSCALE|... */ ++} ++ ++static void StoreJP2K(char *options) ++{ ++ static jas_image_cmptparm_t parm[3]= /* Image parameters */ ++ {{0,0,1,1,0,0,8,0},{0,0,1,1,0,0,8,0},{0,0,1,1,0,0,8,0}}; ++ static char nomem[]={"StoreJP2K: out of memory\n"}, ++ write[]={"w"}; ++ jas_image_t *img; ++ jas_stream_t *str; ++ FILE *fp, *fp2; ++ byte *pic, *r, *g, *b; ++ const char *filename; ++ char *iobuf = 0; ++ unsigned long imagesize; ++ jas_clrspc_t color_space; ++ int nc, w, h, pfree, ptype, error = 1; ++ register int i; ++ ++ /* This is a generic subroutine for writing JPEG 2000 image files using the ++ JasPer Library. Our argument is an ASCII string, containing a Space (" ")- ++ separated sequence of encoder options that currently aren't well documented. ++ Most of the work is identical for both ".jpc" and ".jp2" files. Start by ++ verifying that the output file can be opened, then get an image buffer from ++ XV and begin crunching it into a suitable form for the JasPer Library. ++ */ ++ if (!(fp = OpenOutFile(filename = fbasename))) return; /* Oops! */ ++ setbuf(fp,0); /* We don't really use this file pointer for I/O; see below */ ++ fbasename = BaseName(filename); ++ WaitCursor(); ++ pic = GenSavePic(&ptype,&w,&h,&pfree,&nc,&r,&g,&b); ++ imagesize = w*h; ++ if (ptype == PIC24) imagesize *= 3; + -+ case 16: -+ for (i=0; i<high; i++, lip+=bperline) { -+ CARD16 *ip16 = (CARD16 *)lip; -+ for (j=0; j<wide; j++) { -+ xcol = screen_rgb[0][*pp++]; -+ xcol |= screen_rgb[1][*pp++]; -+ xcol |= screen_rgb[2][*pp++]; -+ *ip16++ = (CARD16)xcol; ++ /* As an optimization to save file space, even if our user didn't ask to store ++ a gray-scale image, check whether we could and, if so, do it anyway. ++ */ ++ if (colorType != F_GREYSCALE) /* can we force a gray-scale image? */ ++ { ++ if (ptype == PIC8) ++ { ++ i = nc; ++ while (--i >= 0 && r[i] == g[i] && r[i] == b[i]); + } -+ } -+ break; ++ else /* PIC24 */ ++ { register byte *p = pic + imagesize; + -+ case 24: -+ for (i=0; i<high; i++, lip+=bperline) { -+ for (j=0, ip=lip; j<wide; j++) { -+ xcol = screen_rgb[0][*pp++]; -+ xcol |= screen_rgb[1][*pp++]; -+ xcol |= screen_rgb[2][*pp++]; -+#ifdef USE_24BIT_ENDIAN_FIX -+ if (border == MSBFirst) { -+ *ip++ = (xcol>>16) & 0xff; -+ *ip++ = (xcol>>8) & 0xff; -+ *ip++ = xcol & 0xff; -+ } -+ else { /* LSBFirst */ -+ *ip++ = xcol & 0xff; -+ *ip++ = (xcol>>8) & 0xff; -+ *ip++ = (xcol>>16) & 0xff; -+ } -+#else /* GRR: this came with the FixPix patch, but I don't think it's right */ -+ *ip++ = (xcol >> 16) & 0xff; /* (no way to test, however, so */ -+ *ip++ = (xcol >> 8) & 0xff; /* it's left enabled by default) */ -+ *ip++ = xcol & 0xff; -+#endif -+ } -+ } -+ break; ++ while ((p -= 3) >= pic && p[0] == p[1] && p[0] == p[2]); ++ i = p-pic; ++ }; ++ if (i < 0) colorType = F_GREYSCALE; /* We made it all the way through */ ++ }; ++ ++ /* If XV is currently color-mapping the image, make a color-mapped copy so that ++ the map needn't be transmitted in the output file. ++ */ ++ if ((i = (colorType != F_GREYSCALE) << 1 | (ptype != PIC8)) != 3) ++ { byte *tmp = pic, *last = pic + imagesize; ++ register byte *from = tmp, *to = pic; ++ ++ if (!(pic = (byte *)malloc(imagesize))) FatalError(nomem); ++ switch (i) ++ { + -+ case 32: -+ for (i=0; i<high; i++, lip+=bperline) { -+ CARD32 *ip32 = (CARD32 *)lip; -+ for (j=0; j<wide; j++) { -+ xcol = screen_rgb[0][*pp++]; -+ xcol |= screen_rgb[1][*pp++]; -+ xcol |= screen_rgb[2][*pp++]; -+ *ip32++ = (CARD32)xcol; ++ /* Color-map 8->8 bit image. */ ++ ++ case 0: do ++ { ++ i = *from; ++ *to++ = MONO(r[i],g[i],b[i]); ++ } ++ while (++from < last); ++ break; ++ ++ /* Color-map 24->8 bit image. */ ++ ++ case 1: do *to++ = MONO(from[0],from[1],from[2]); ++ while ((from += 3) < last); ++ break; ++ ++ /* Color-map 8->24 bit image. */ ++ ++ case 2: do ++ { ++ i = *from; ++ *to++ = r[i]; *to++ = g[i]; *to++ = b[i]; ++ } ++ while (++from < last); ++ break; ++ }; ++ if (pfree) free(tmp); /* Release the original image buffer if we can */ ++ pfree = 1; /* Let the modified buffer be released later */ ++ }; ++ ++ /* Initialize various image-file parameter variables. */ ++ ++ parm[0].width = w; ++ parm[0].height = h; ++ if (colorType == F_GREYSCALE) /* gray-scale image */ ++ { ++ ptype = 1; /* No. of color planes */ ++ color_space = JAS_CLRSPC_SGRAY; ++ } ++ else /* RGB color image */ ++ { ++ ptype = 3; /* No. of color planes */ ++ color_space = JAS_CLRSPC_SRGB; ++ parm[2].width = parm[1].width = parm[0].width; ++ parm[2].height = parm[1].height = parm[0].height; ++ }; ++ ++ /* Now comes a egregious hack: The JasPer Library will eventually want to ++ close the output file that it writes, but since XV opened the file, XV also ++ thinks it has the right to close the file! In order to pacify them both, ++ we duplicate the file pointer and let the JasPer Library have it, while we ++ retain the original for XV. ++ ++ XXX This code is very UNIX-specific; what's an equivalent hack for Windows? ++ */ ++ if (!(fp2 = (i = dup(fileno(fp))) >= 0 ? fdopen(i,write) : 0)) ++ FatalError("StoreJP2K: can't duplicate output file pointer\n"); ++ if (!(iobuf = SetBuf(fp2))) ++ { ++ (void)fclose(fp2); ++ FatalError(nomem); ++ }; ++ ++ /* Hand our output file to the JasPer Library and create an image object. ++ "jas_stream_close()" will eventually close our output file, so only do it ++ explicitly if no stream can be created. If everything looks copacetic, ++ then write our buffer contents to the image components' streams. ++ */ ++ if (!(str = jas_stream_freopen(filename,write,fp2))) ++ { ++ (void)fclose(fp2); ++ FatalError("StoreJP2K: can't open output stream\n"); ++ }; ++ if (!(img = jas_image_create(ptype,parm,color_space))) goto L2; ++ if (ptype == 1) ++ { register jas_stream_t *c = img->cmpts_[0]->stream_; ++ register byte *p = pic; ++ ++ /* Since this is a 1-plane image, avoid a lot of errant nonsense in the ++ JasPer Library by sequentially writing all of the data directly from our ++ buffer. ++ */ ++ jas_image_setcmpttype(img,0,JAS_IMAGE_CT_GRAY_Y); ++ img->cmpts_[0]->type_ = JAS_IMAGE_CT_GRAY_Y; ++ do if ((i = (*c->ops_->write_)(c->obj_,(char *)p,imagesize)) <= 0) ++ goto L1; ++ while ((p += i),(imagesize -= i) > 0); ++ if (jas_stream_flush(c) < 0) goto L1; ++ } ++ else /* RGB color image */ ++ { ++ ++ /* Writing color images is inefficient because JPEG 2000 wants to partition ++ file data into separate image planes (colors), while XV wants data ++ samples from each plane to be interleaved as 3-byte pixels. Apparently ++ the fastest method consists of 3 passes through the XV image buffer, ++ from which we extract the bytes of each component. ++ */ ++ i = 0; ++ do /* each color component */ ++ { long npix = imagesize/3; ++ register jas_stream_t *c = img->cmpts_[i]->stream_; ++ register byte *p = pic + i; ++ ++ jas_image_setcmpttype(img,i,i+JAS_IMAGE_CT_RGB_R); ++ do if (jas_stream_putc(c,*p) < 0) goto L1; ++ while ((p += 3),--npix > 0); ++ if (jas_stream_flush(c) < 0) goto L1; + } -+ } -+ break; -+ } /* end switch */ - } - - else { -@@ -2458,6 +2771,7 @@ - - - /***********************/ -+#if 0 /* NOTUSED */ - static int highbit(ul) - unsigned long ul; - { -@@ -2470,6 +2784,7 @@ - for (i=31; ((ul & hb) == 0) && i>=0; i--, ul<<=1); - return i; - } -+#endif /* 0 - NOTUSED */ - - - -@@ -2680,6 +2995,9 @@ - char *str; - int wide, high, opaque,omode; - { -+#ifndef USE_MKSTEMP -+ int tmpfd; -+#endif - int i; - byte *bgpic24; - char syscmd[512], fname[128], errstr[512]; -@@ -2705,6 +3023,13 @@ - close(mkstemp(fname)); - #else - mktemp(fname); -+ tmpfd = open(fname, O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); -+ if (tmpfd < 0) { -+ sprintf(errstr, "Error: can't create temporary file %s", fname); -+ ErrPopUp(errstr, "\nDoh!"); -+ return 0; -+ } -+ close(tmpfd); - #endif - - /* run bggen to generate the background */ -@@ -2978,7 +3303,7 @@ - - ftype = ReadFileType(name); - -- if (ftype == RFT_COMPRESS) { /* handle compressed/gzipped files */ -+ if ((ftype == RFT_COMPRESS) || (ftype == RFT_BZIP2)) { /* handle .Z,gz,bz2 */ - #ifdef VMS - basefname[0] = '\0'; - strcpy(basefname, name); /* remove trailing .Z */ -@@ -2988,7 +3313,7 @@ - uncName = name; - #endif - -- if (UncompressFile(uncName, uncompname)) { -+ if (UncompressFile(uncName, uncompname, ftype)) { - ftype = ReadFileType(uncompname); - readname = uncompname; - } -@@ -3029,9 +3354,3 @@ - - return 1; - } -- -- -- -- -- -- -diff -ruN xv-3.10a-bugfixes/xvinfo.c xv-3.10a-enhancements/xvinfo.c ---- xv-3.10a-bugfixes/xvinfo.c 2004-05-16 18:03:43.000000000 -0700 -+++ xv-3.10a-enhancements/xvinfo.c 2005-05-01 00:05:53.000000000 -0700 -@@ -265,7 +265,7 @@ - if (stnum == ISTR_WARNING && !ctrlUp && !infoUp && !anyBrowUp && - strlen(istrs[stnum])) { - OpenAlert(istrs[stnum]); -- sleep(3); -+ sleep(1); /* was 3, but _really_ slow for TIFFs with unknown tags... */ - CloseAlert(); - } - } -diff -ruN xv-3.10a-bugfixes/xvjpeg.c xv-3.10a-enhancements/xvjpeg.c ---- xv-3.10a-bugfixes/xvjpeg.c 2005-03-27 16:23:06.000000000 -0800 -+++ xv-3.10a-enhancements/xvjpeg.c 2005-04-17 14:45:28.000000000 -0700 -@@ -51,11 +51,21 @@ - static void clickJD PARM((int, int)); - static void doCmd PARM((int)); - static void writeJPEG PARM((void)); -+#if JPEG_LIB_VERSION > 60 -+METHODDEF(void) xv_error_exit PARM((j_common_ptr)); -+METHODDEF(void) xv_error_output PARM((j_common_ptr)); -+METHODDEF(void) xv_prog_meter PARM((j_common_ptr)); -+#else - METHODDEF void xv_error_exit PARM((j_common_ptr)); - METHODDEF void xv_error_output PARM((j_common_ptr)); - METHODDEF void xv_prog_meter PARM((j_common_ptr)); -+#endif - static unsigned int j_getc PARM((j_decompress_ptr)); -+#if JPEG_LIB_VERSION > 60 -+METHODDEF(boolean) xv_process_comment PARM((j_decompress_ptr)); -+#else - METHODDEF boolean xv_process_comment PARM((j_decompress_ptr)); -+#endif - static int writeJFIF PARM((FILE *, byte *, int,int,int)); - - -@@ -85,10 +95,10 @@ - - XSelectInput(theDisp, jpegW, ExposureMask | ButtonPressMask | KeyPressMask); - -- DCreate(&qDial, jpegW, 10, 10, 80, 100, 1, 100, 75, 5, -+ DCreate(&qDial, jpegW, 10, 10, 80, 100, 1.0, 100.0, 75.0, 1.0, 5.0, - infofg, infobg, hicol, locol, "Quality", "%"); - -- DCreate(&smDial, jpegW, 120, 10, 80, 100, 0, 100, 0, 5, -+ DCreate(&smDial, jpegW, 120, 10, 80, 100, 0.0, 100.0, 0.0, 1.0, 5.0, - infofg, infobg, hicol, locol, "Smoothing", "%"); - - BTCreate(&jbut[J_BOK], jpegW, JWIDE-180-1, JHIGH-10-BUTTH-1, 80, BUTTH, -@@ -415,7 +425,11 @@ - - - /**************************************************/ --METHODDEF void xv_error_exit(cinfo) -+#if JPEG_LIB_VERSION > 60 -+METHODDEF(void) xv_error_exit(cinfo) -+#else -+METHODDEF void xv_error_exit(cinfo) -+#endif - j_common_ptr cinfo; - { - my_error_ptr myerr; -@@ -427,7 +441,11 @@ - - - /**************************************************/ --METHODDEF void xv_error_output(cinfo) -+#if JPEG_LIB_VERSION > 60 -+METHODDEF(void) xv_error_output(cinfo) -+#else -+METHODDEF void xv_error_output(cinfo) -+#endif - j_common_ptr cinfo; - { - my_error_ptr myerr; -@@ -441,7 +459,11 @@ - - - /**************************************************/ --METHODDEF void xv_prog_meter(cinfo) -+#if JPEG_LIB_VERSION > 60 -+METHODDEF(void) xv_prog_meter(cinfo) -+#else -+METHODDEF void xv_prog_meter(cinfo) -+#endif - j_common_ptr cinfo; - { - struct jpeg_progress_mgr *prog; -@@ -706,7 +728,11 @@ - - - /**************************************************/ --METHODDEF boolean xv_process_comment(cinfo) -+#if JPEG_LIB_VERSION > 60 -+METHODDEF(boolean) xv_process_comment(cinfo) -+#else -+METHODDEF boolean xv_process_comment(cinfo) -+#endif - j_decompress_ptr cinfo; - { - int length, hasnull; -@@ -794,8 +820,8 @@ - - - jpeg_set_defaults(&cinfo); -- jpeg_set_quality(&cinfo, qDial.val, TRUE); -- cinfo.smoothing_factor = smDial.val; -+ jpeg_set_quality(&cinfo, (int)qDial.val, TRUE); -+ cinfo.smoothing_factor = (int)smDial.val; - - - jpeg_start_compress(&cinfo, TRUE); -@@ -804,7 +830,7 @@ - /*** COMMENT HANDLING ***/ - - sprintf(xvcmt, "%sXV %s Quality = %d, Smoothing = %d\n", -- CREATOR_STR, REVDATE, qDial.val, smDial.val); -+ CREATOR_STR, REVDATE, (int)qDial.val, (int)smDial.val); - - if (picComments) { /* append XV comment */ - char *sp, *sp1; int done; -@@ -866,4 +892,27 @@ - - - ++ while (++i <= 2); ++ }; ++ if ( (*(format == F_JPC ? jpc_encode : jp2_encode))(img,str,options) >= 0 ++ && jas_stream_flush(str) >= 0 ++ ) error = 0; /* Success! */ ++L1: jas_image_destroy(img); ++L2: (void)jas_stream_close(str); ++ if (iobuf) free(iobuf); ++ if (pfree) free(pic); ++ if (!CloseOutFile(fp,filename,error)) DirBox(0); ++ SetCursors(-1); ++} + -+/*******************************************/ -+void -+VersionInfoJPEG() /* GRR 19980605, 19980607 */ ++void JP2KDialog(int vis) +{ -+ int major = JPEG_LIB_VERSION / 10; -+ int minor = JPEG_LIB_VERSION % 10; -+ char minoralpha[2]; ++ if ((jp2kUp = vis)) CenterMapWindow(jp2kW,0,0,JP2KW,JP2KH); ++ else XUnmapWindow(theDisp,jp2kW); ++} ++ ++static void TWRedraw(Window w,unsigned int val) ++{ ++ char buf[11]; ++ register int i; + -+ if (minor) { -+ minoralpha[0] = (char)(minor - 1 + 'a'); -+ minoralpha[1] = '\0'; -+ } else -+ minoralpha[0] = '\0'; ++ /* Draw a 1-line numeric text string in the specified window, representing the ++ argument value as a left-justified unsigned decimal integer, followed by a ++ "cursor" icon. ++ */ ++ sprintf(buf,"%u",val); ++ if (ctrlColor) XClearArea(theDisp,w,2,2,TEXTW-4,TEXTH-4,False); ++ else XClearWindow(theDisp,w); ++ Draw3dRect(w,0,0,TEXTW-1,TEXTH-1,R3D_IN,2,hicol,locol,infobg); ++ XSetForeground(theDisp,theGC,infofg); ++ XDrawString(theDisp,w,theGC,3,ASCENT+3,buf,i = strlen(buf)); + -+/* fprintf(stderr, " Compiled with libjpeg %d.%d.\n", major, minor); */ -+ fprintf(stderr, " Compiled with libjpeg %d%s.\n", major, minoralpha); ++ /* Draw a "cursor" icon after the numeric string. */ ++ ++ i = XTextWidth(mfinfo,buf,i); ++ XDrawLine(theDisp,w,theGC,i+3,2 ,i+3,2+CHIGH+1); ++ XDrawLine(theDisp,w,theGC,i+3,2+CHIGH+1,i+5,2+CHIGH+3); ++ XDrawLine(theDisp,w,theGC,i+3,2+CHIGH+1,i+1,2+CHIGH+3); +} + ++int JP2KCheckEvent(register XEvent *xev) ++{ ++ int ok = 0; ++ ++ /* Check whether the argument "X Windows" event is for one of our subwindows. ++ If it is, handle the event and return 1; otherwise, return 0. ++ */ ++ if (!jp2kUp) return 0; ++ switch (xev->type) ++ { KeySym ks; ++ int len; ++ char buf[128]; ++ register int i; ++ ++ /* Throw away excess "expose" events for "dumb" windows. */ ++ ++ case Expose : ++# define E ((XExposeEvent *)xev) ++ if (E->window == jp2kW) ++ { XRectangle rect; ++ ++ rect.x = E->x ; rect.y = E->y ; ++ rect.width = E->width; rect.height = E->height; ++ XSetClipRectangles(theDisp,theGC,0,0,&rect,1,Unsorted); ++ XSetForeground(theDisp,theGC,infofg); ++ XSetBackground(theDisp,theGC,infobg); ++ i = sizeof button/sizeof *button; ++ while (--i >= 0) BTRedraw(&button[i]); ++ i = sizeof chkbut/sizeof *chkbut; ++ while (--i >= 0) CBRedraw(&chkbut[i]); ++ i = sizeof menu/sizeof *menu; ++ while (--i >= 0) MBRedraw(&menu[i]); ++ RBRedraw(radio,-1); ++ DrawString(jp2kW,10,10+ASCENT,"Save JPEG 2000 File..."); ++ DrawString(jp2kW,10,10+ASCENT+2*LINEHIGH,"Style options:"); ++ DrawString(jp2kW,JP2KW-2*MENUW-10,10+ASCENT+2*LINEHIGH, ++ "Coding Blk"); ++ DrawString(jp2kW,JP2KW-1*MENUW-10,10+ASCENT+2*LINEHIGH, ++ " Precinct"); ++ DrawString(jp2kW, ++ JP2KW-2*MENUW-10,10+ASCENT+SPACING+3*LINEHIGH+2*MENUH, ++ "Progression:"); ++ DrawString(jp2kW, ++ JP2KW-2*TEXTW-10,10+ASCENT+SPACING+3*LINEHIGH+3*MENUH+0*TEXTH, ++ "Guard bits:"); ++ DrawString(jp2kW, ++ JP2KW-2*TEXTW-10,10+ASCENT+SPACING+3*LINEHIGH+3*MENUH+1*TEXTH, ++ "Res levels:"); ++ DrawString(jp2kW, ++ JP2KW-2*TEXTW-10,10+ASCENT+SPACING+3*LINEHIGH+3*MENUH+2*TEXTH, ++ "Rate:"); ++ XSetClipMask(theDisp,theGC,None); ++ ok = 1; ++ break; ++ }; ++ i = sizeof text/sizeof *text; ++ while (--i >= 0 && E->window != text[i]); ++ if (i >= 0) ++ { ++ TWRedraw(E->window,textval[i]); ++ ok = 1; ++ }; ++ break; ++# undef E ++ ++ /* Check whether the user pressed one of our buttons. */ ++ ++ case ButtonPress: ++# define E ((XButtonEvent *)xev) ++ if (E->button == Button1 && E->window == jp2kW) ++ { register int j; ++ ++ ok = 1; /* Check whether a regular button was pressed */ ++ i = sizeof button/sizeof *button; ++ while ( --i >= 0 ++ && !PTINRECT(E->x,E->y,button[i].x,button[i].y,button[i].w,button[i].h) ++ ); ++ if (i >= 0) /* our button was pressed */ ++ { char options[1024]; ++ register char *p; ++ register const char *q; ++ ++ if (!BTTrack(&button[i])) break; /* Ignore it */ ++ if (i != J_BOK) /* must be "Cancel" button */ ++ { ++ JP2KDialog(0); ++ break; ++ }; ++ ++ /* Our user hit the "Ok" button. At this point, we have an ugly ++ job to do: JasPer Library encoder options must be specified ++ as an ASCII string of Space (" ")-separated <tag>[=<value>] ++ entries, so we must collect the values of all of our widgets ++ and subwindows, determine whether our user has requested any ++ non-default values, then build the string only for the JasPer ++ Library to immediately tear it apart again. Yechh! ++ */ ++ if ((unsigned)textval[J_TGBIT]-1 > 7) ++ { ++ OpenAlert("No. of guard bits must be 1-8"); ++ sleep(3); ++ CloseAlert(); ++ break; ++ }; ++ if ((unsigned)textval[J_TRES ] <= 0) ++ { ++ OpenAlert("Maximum resolution levels must be >= 1"); ++ sleep(3); ++ CloseAlert(); ++ break; ++ }; ++ ++ /* XXX Should we check and complain if the rate is zero? ++ JasPer Library Version 1.701 apparently accepts that ++ value, even though it seems kinda weird. ++ */ ++ p = options; ++ i = 0; ++ do if ((j = MBWhich(&menu[i])) != 5) ++ { static const char *parm[2] = ++ {"cblkwidth=%u", "cblkheight=%u"}; ++ ++ if (p > options) *p++ = ' '; ++ sprintf(p,parm[i-J_MCBXW],++j); ++ while (*++p); ++ } ++ while (++i <= J_MCBXH); ++ do if ((j = MBWhich(&menu[i])) < 15) ++ { static const char *parm[2] = ++ {"prcwidth=%u", "prcheight=%u"}; ++ ++ if (p > options) *p++ = ' '; ++ sprintf(p,parm[i-J_MPREW],j); ++ while (*++p); ++ } ++ while (++i <= J_MPREH); ++ if ((j = MBWhich(&menu[i]))) ++ { ++ if (p > options) *p++ = ' '; ++ *p++ = 'p'; *p++ = 'r'; *p++ = 'g'; *p = '='; ++ q = ProgList[j]; ++ while ((*++p = *q++)); ++ }; ++ if ((i = textval[J_TRES ]) != 6) ++ { ++ if (p > options) *p++ = ' '; ++ sprintf(p,"numrlvls=%u",i); ++ while (*++p); ++ }; ++ i = 0; ++ do if (chkbut[i].val) /* append this encoding option */ ++ { ++ if (p > options) *p++ = ' '; ++ q = chkbut[i].str; ++ while ((*p++ = *q++)); ++ *--p = '\000'; ++ } ++ while (++i < sizeof chkbut/sizeof *chkbut); ++ if ((i = textval[J_TGBIT]) != 2) ++ { ++ if (p > options) *p++ = ' '; ++ sprintf(p,"numgbits=%u",i); ++ while (*++p); ++ }; ++ if ((i = textval[J_TRATE]) != 100) ++ { ++ if (p > options) *p++ = ' '; ++ *p++ = 'r'; *p++ = 'a'; *p++ = 't'; *p++ = 'e'; ++ *p++ = '='; ++ if (i) /* non-zero rate */ ++ { ++ if (RBWhich(radio)) sprintf(p,"%uB",i); /* # Bytes */ ++ else /* the value is a percentage */ ++ { ++ if (i > 100) i = 200; /* => Raw size + 1 */ ++ sprintf(p,"%u.%.2u",i/100,i%100); ++ } ++ while (*++p); ++ } ++ else /* rate = 0 */ ++ { ++ ++ /* XXX This is apparently valid, since JasPer Library ++ Version 1.701 doesn't complain about it. ++ */ ++ *p++ = '0'; ++ *p = '\000'; ++ } ++ }; ++ StoreJP2K(options); /* Finally, do the *real* work! */ ++ JP2KDialog(0); ++ p = GetDirFullName(); ++ if (!ISPIPE(*p)) ++ { ++ XVCreatedFile(p); ++ StickInCtrlList(0); ++ }; ++ break; ++ }; ++ ++ /* See whether a check-box button was pressed. */ + ++ i = sizeof chkbut/sizeof *chkbut; ++ while (--i >= 0 && !CBClick(&chkbut[i],E->x,E->y)); ++ if (i >= 0) /* our button was pressed */ ++ { ++ (void)CBTrack(&chkbut[i]); ++ break; ++ }; ++ ++ /* See whether a menu button was pressed. */ ++ ++ i = sizeof menu/sizeof *menu; ++ while (--i >= 0 && !MBClick(&menu[i],E->x,E->y)); ++ if (i >= 0) /* our button was pressed */ ++ { register int j; ++ ++ if ((j = MBTrack(&menu[i])) >= 0) ++ { ++ switch (i) ++ { ++ ++ /* The JasPer Library constrains a coding box's area ++ (width x height) to be <= 4096 pixels, so if this ++ button-press would violate that condition, then ++ quietly limit the box's orthogonal dimension by just ++ enough to compensate. ++ */ ++ case J_MCBXH: ++ case J_MCBXW: if (MBWhich(&menu[!i]) + j >= 10) ++ MBSelect(&menu[!i],10 - j); ++ }; ++ MBSelect(&menu[i],j); ++ MBSetActive(&menu[i],1); ++ }; ++ break; ++ }; ++ ++ /* See whether a radio button was pressed. */ ++ ++ if ( (i = RBClick(radio,E->x,E->y)) >= 0 /* button pressed */ ++ && RBTrack(radio,i) ++ ) ++ { ++ RBSelect(radio,i); ++ RBSetActive(radio,i,1); ++ }; ++ break; ++ }; ++ XBell(theDisp,50); ++ break; ++# undef E ++ ++ /* Translate a few key-press events into simulated button events. */ ++ ++ case KeyPress : ++# define E ((XKeyEvent *)xev) ++ buf[len = XLookupString(E,buf,sizeof buf,&ks,0)] = '\000'; ++ RemapKeyCheck(ks,buf,&len); ++ if (E->window == jp2kW) ++ { ++ ok = 1; ++ if (len > 0) ++ switch (buf[0]) ++ { ++ case '\r' : ++ case '\n' : FakeButtonPress(&button[J_BOK ]); ++ break; ++ case '\033': FakeButtonPress(&button[J_BCANC]); ++ }; ++ break; ++ }; ++ i = sizeof text/sizeof *text; ++ while (--i >= 0 && E->window != text[i]); ++ if (i >= 0) /* a key was pressed in our text window */ ++ { int oldval = textval[i]; /* Save this subwindow's old value */ ++ register int c, j = 0; ++ ++ /* This is a *very* simple text-input editing loop that assembles an ++ an unsigned integer from successive ASCII decimal digits, typed ++ into one of our 1-line subwindows. For convenience, the only ++ character recognized is Backspace. ++ */ ++ ok = 1; ++ L: if (j >= len) break; ++ if ((unsigned)(c = buf[j++] - '0') <= 9) ++ { ++ TWRedraw(text[i],textval[i] = textval[i]*10 + c); ++ goto L; ++ }; ++ if ((c += '0') == '\b') ++ { ++ TWRedraw(text[i],textval[i] = textval[i]/10); ++ goto L; ++ }; ++ textval[i] = oldval; ++ }; ++ XBell(theDisp,50); ++# undef E ++ }; ++ return ok; ++} + + ++/*******************************************/ ++void ++VersionInfoJP2K() /* GRR 20070304 */ ++{ ++ fprintf(stderr, " Compiled with libjasper %s; using libjasper %s.\n", ++ JAS_VERSION, jas_getversion()); ++} + - #endif /* HAVE_JPEG */ -diff -ruN xv-3.10a-bugfixes/xvmag.c xv-3.10a-enhancements/xvmag.c ---- xv-3.10a-bugfixes/xvmag.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvmag.c 2005-04-17 22:56:58.000000000 -0700 ++#endif /* HAVE_JP2K */ +diff -u -r --new-file xv-3.10a.orig/xvmag.c xv-3.10a/xvmag.c +--- xv-3.10a.orig/xvmag.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvmag.c 2005-04-18 00:56:58.000000000 -0500 @@ -0,0 +1,866 @@ +/* + * xvmag.c - load routine for `MAG' format pictures. @@ -10734,9 +4306,9 @@ diff -ruN xv-3.10a-bugfixes/xvmag.c xv-3.10a-enhancements/xvmag.c + return r; +} +#endif /* HAVE_MAG */ -diff -ruN xv-3.10a-bugfixes/xvmaki.c xv-3.10a-enhancements/xvmaki.c ---- xv-3.10a-bugfixes/xvmaki.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvmaki.c 2005-04-17 22:57:01.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvmaki.c xv-3.10a/xvmaki.c +--- xv-3.10a.orig/xvmaki.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvmaki.c 2005-04-18 00:57:01.000000000 -0500 @@ -0,0 +1,794 @@ +/* + * xvmaki.c - load routine for `MAKI' format pictures. @@ -11532,9 +5104,9 @@ diff -ruN xv-3.10a-bugfixes/xvmaki.c xv-3.10a-enhancements/xvmaki.c + return r; +} +#endif /* HAVE_MAKI */ -diff -ruN xv-3.10a-bugfixes/xvmgcsfx.c xv-3.10a-enhancements/xvmgcsfx.c ---- xv-3.10a-bugfixes/xvmgcsfx.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvmgcsfx.c 2005-05-01 10:20:12.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvmgcsfx.c xv-3.10a/xvmgcsfx.c +--- xv-3.10a.orig/xvmgcsfx.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvmgcsfx.c 2007-04-15 17:02:32.000000000 -0500 @@ -0,0 +1,2276 @@ +/* + * $Id: xvmgcsfx.c,v 1.23 95/11/27 19:03:36 tin329 Exp Locker: tin329 $ @@ -13759,8 +7331,8 @@ diff -ruN xv-3.10a-bugfixes/xvmgcsfx.c xv-3.10a-enhancements/xvmgcsfx.c +/*******************************************/ +int getInputCom() +{ -+ static char *labels[] = { "\nOk", "\033Cancel" }; -+ int i; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ int i; + + strcpy(input_command_ex, MGCSFX_DEFAULT_INPUT_COMMAND); + i = GetStrPopUp("Input External Command (Input is PNM):", labels, 2, @@ -13776,8 +7348,8 @@ diff -ruN xv-3.10a-bugfixes/xvmgcsfx.c xv-3.10a-enhancements/xvmgcsfx.c + +int getOutputCom() +{ -+ static char *labels[] = { "\nOk", "\033Cancel" }; -+ int i; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ int i; + + strcpy(output_command_ex, MGCSFX_DEFAULT_OUTPUT_COMMAND); + i = GetStrPopUp("Input External Command (Output is PNM_RAW):", labels, 2, @@ -13812,180 +7384,9 @@ diff -ruN xv-3.10a-bugfixes/xvmgcsfx.c xv-3.10a-enhancements/xvmgcsfx.c +#endif + +#endif /* HAVE_MGCSFX */ -diff -ruN xv-3.10a-bugfixes/xvmisc.c xv-3.10a-enhancements/xvmisc.c ---- xv-3.10a-bugfixes/xvmisc.c 2005-03-20 22:47:06.000000000 -0800 -+++ xv-3.10a-enhancements/xvmisc.c 2005-04-17 14:45:28.000000000 -0700 -@@ -103,10 +103,18 @@ - if (!usesize || !(i&WidthValue)) w = defw; - if (!usesize || !(i&HeightValue)) h = defh; - -- hints.flags |= USSize; -+ hints.flags |= USSize | PWinGravity; - -- if (i&XValue && i&XNegative) x = dispWIDE - w - abs(x); -- if (i&YValue && i&YNegative) y = dispHIGH - h - abs(y); -+ hints.win_gravity = NorthWestGravity; -+ if (i&XValue && i&XNegative) { -+ hints.win_gravity = NorthEastGravity; -+ x = dispWIDE - (w + 2 * bwidth) - abs(x); -+ } -+ if (i&YValue && i&YNegative) { -+ hints.win_gravity = (hints.win_gravity == NorthWestGravity) ? -+ SouthWestGravity : SouthEastGravity; -+ y = dispHIGH - (h + 2 * bwidth) - abs(y); -+ } - - - #define VROOT_TRANS -@@ -142,20 +150,19 @@ - if (!win) return(win); /* leave immediately if couldn't create */ - - -- XSetStandardProperties(theDisp, win, name, name, None, NULL, 0, &hints); -- - xwmh.input = True; - xwmh.flags = InputHint; - if (iconPix) { xwmh.icon_pixmap = iconPix; xwmh.flags |= IconPixmapHint; } -- XSetWMHints(theDisp, win, &xwmh); - - if (clname && strlen(clname)) { - classh.res_name = "xv"; - classh.res_class = clname; -- XSetClassHint(theDisp, win, &classh); - StoreDeleteWindowProp(win); - } - -+ XmbSetWMProperties(theDisp, win, name, name, NULL, 0, &hints, &xwmh, -+ clname ? &classh : NULL); -+ - return(win); - } - -@@ -232,28 +239,28 @@ - int i = CK_NONE; - - if (ks==XK_Up || ks==XK_KP_Up || -- ks==XK_KP_8 || ks==XK_F28) i=CK_UP; -+ ks==XK_F28) i=CK_UP; - - else if (ks==XK_Down || ks==XK_KP_Down || -- ks==XK_KP_2 || ks==XK_F34) i=CK_DOWN; -+ ks==XK_F34) i=CK_DOWN; - - else if (ks==XK_Left || ks==XK_KP_Left || -- ks==XK_KP_4 || ks==XK_F30) i=CK_LEFT; -+ ks==XK_F30) i=CK_LEFT; - - else if (ks==XK_Right || ks==XK_KP_Right || -- ks==XK_KP_6 || ks==XK_F32) i=CK_RIGHT; -+ ks==XK_F32) i=CK_RIGHT; - - else if (ks==XK_Prior || ks==XK_KP_Prior || -- ks==XK_KP_9 || ks==XK_F29) i=CK_PAGEUP; -+ ks==XK_F29) i=CK_PAGEUP; - - else if (ks==XK_Next || ks==XK_KP_Next || -- ks==XK_KP_3 || ks==XK_F35) i=CK_PAGEDOWN; -+ ks==XK_F35) i=CK_PAGEDOWN; - - else if (ks==XK_Home || ks==XK_KP_Home || -- ks==XK_KP_7 || ks==XK_F27) i=CK_HOME; -+ ks==XK_F27) i=CK_HOME; - - else if (ks==XK_End || ks==XK_KP_End || -- ks==XK_KP_1 || ks==XK_F33) i=CK_END; -+ ks==XK_F33) i=CK_END; - - else i = CK_NONE; - -@@ -503,6 +510,11 @@ - as we have to keep the alloc'd colors around, but we don't want anything - else to stay */ - -+#ifdef AUTO_EXPAND -+ chdir(initdir); -+ Vdsettle(); -+#endif -+ - if (!theDisp) exit(i); /* called before connection opened */ - - if (useroot && i==0) { /* save the root info */ -@@ -526,6 +538,26 @@ - if (tiffW) XDestroyWindow(theDisp, tiffW); - #endif - -+#ifdef HAVE_PNG -+ if (pngW) XDestroyWindow(theDisp, pngW); -+#endif -+ -+#ifdef HAVE_PCD -+ if (pcdW) XDestroyWindow(theDisp, pcdW); -+#endif -+ -+#ifdef HAVE_PIC2 -+ if (pic2W) XDestroyWindow(theDisp, pic2W); -+#endif -+ -+#ifdef HAVE_MGCSFX -+ if (mgcsfxW) XDestroyWindow(theDisp, mgcsfxW); -+#endif -+ -+#ifdef HAVE_PNG -+ if (pngW) XDestroyWindow(theDisp, pngW); -+#endif -+ - /* if NOT using stdcmap for images, free stdcmap */ - if (colorMapMode != CM_STDCMAP) { - int j; -@@ -722,6 +754,26 @@ - #ifdef HAVE_TIFF - if (tiffW) XDefineCursor(theDisp, tiffW, otherc); - #endif -+ -+#ifdef HAVE_PNG -+ if (pngW) XDefineCursor(theDisp, pngW, otherc); -+#endif -+ -+#ifdef HAVE_PNG -+ if (pngW) XDefineCursor(theDisp, pngW, otherc); -+#endif -+ -+#ifdef HAVE_PCD -+ if (pcdW) XDefineCursor(theDisp, pcdW, otherc); -+#endif -+ -+#ifdef HAVE_PIC2 -+ if (pic2W) XDefineCursor(theDisp, pic2W, otherc); -+#endif -+ -+#ifdef HAVE_MGCSFX -+ if (mgcsfxW) XDefineCursor(theDisp, mgcsfxW, otherc); -+#endif - } - - -@@ -921,7 +973,7 @@ - void XVCreatedFile(fullname) - char *fullname; - { -- /* called whenever a file has been deleted. Updates browser & dir windows, -+ /* called whenever a file has been created. Updates browser & dir windows, - if necessary */ - - BRCreatedFile(fullname); -@@ -1006,6 +1058,9 @@ - ((rv=(char *) getenv("cwd"))==NULL)) rv = "./"; - strcpy(buf, rv); - } -+#ifdef AUTO_EXPAND -+ Vdtodir(buf); -+#endif - } - - -diff -ruN xv-3.10a-bugfixes/xvml.c xv-3.10a-enhancements/xvml.c ---- xv-3.10a-bugfixes/xvml.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvml.c 2005-04-17 22:57:34.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvml.c xv-3.10a/xvml.c +--- xv-3.10a.orig/xvml.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvml.c 2005-04-18 00:57:34.000000000 -0500 @@ -0,0 +1,989 @@ +/* + * xvml.c - makes text item structure for multi-lingual textviewer. @@ -14976,9 +8377,9 @@ diff -ruN xv-3.10a-bugfixes/xvml.c xv-3.10a-enhancements/xvml.c +} + +#endif /* TV_MULTILINGUAL */ -diff -ruN xv-3.10a-bugfixes/xvml.h xv-3.10a-enhancements/xvml.h ---- xv-3.10a-bugfixes/xvml.h 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvml.h 2005-04-17 22:57:45.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvml.h xv-3.10a/xvml.h +--- xv-3.10a.orig/xvml.h 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvml.h 2005-04-18 00:57:45.000000000 -0500 @@ -0,0 +1,96 @@ +#ifndef MLVIEW_H +#define MLVIEW_H @@ -15076,346 +8477,10 @@ diff -ruN xv-3.10a-bugfixes/xvml.h xv-3.10a-enhancements/xvml.h +struct design lookup_design PARM((char *, int)); + +#endif -diff -ruN xv-3.10a-bugfixes/xvpbm.c xv-3.10a-enhancements/xvpbm.c ---- xv-3.10a-bugfixes/xvpbm.c 2005-04-03 14:25:28.000000000 -0700 -+++ xv-3.10a-enhancements/xvpbm.c 2005-04-17 14:04:22.000000000 -0700 -@@ -23,6 +23,15 @@ - */ - - -+typedef unsigned short ush; -+typedef unsigned char uch; -+ -+#define alpha_composite(composite, fg, alpha, bg) { \ -+ ush temp = ((ush)(fg)*(ush)(alpha) + \ -+ (ush)(bg)*(ush)(255 - (ush)(alpha)) + (ush)128); \ -+ (composite) = (uch)((temp + (temp >> 8)) >> 8); \ -+} -+ - #define TRUNCSTR "File appears to be truncated." - - static int garbage; -@@ -31,6 +40,7 @@ - static int loadpbm PARM((FILE *, PICINFO *, int)); - static int loadpgm PARM((FILE *, PICINFO *, int, int)); - static int loadppm PARM((FILE *, PICINFO *, int, int)); -+static int loadpam PARM((FILE *, PICINFO *, int, int)); - static int getint PARM((FILE *, PICINFO *)); - static int getbit PARM((FILE *, PICINFO *)); - static int getshort PARM((FILE *)); -@@ -38,10 +48,83 @@ - - static char *bname; - -+ -+#ifdef HAVE_MGCSFX -+/* -+ * When file read or file write is fail, probably it's caused by -+ * reading from pipe which has no data yet, or writing to pipe -+ * which is not ready yet. -+ * Then we can use system call select() on descriptor of pipe and wait. -+ * If you want, change 'undef' to 'define' in the following line. -+ * This feature is performance-killer. -+ */ -+#undef FIX_PIPE_ERROR -+ -+#ifdef __osf__ -+# ifdef __alpha -+# define FIX_PIPE_ERROR -+# endif -+#endif -+ -+#endif /* HAVE_MGCSFX */ -+ -+ -+#ifdef FIX_PIPE_ERROR -+ -+int pipefdr; -+ -+struct timeval timeout; -+int width; -+fd_set fds; -+ -+static void ready_read() -+{ -+ if(pipefdr < 0) return; /* if file descriptor is not pipe, OK */ -+ WaitCursor(); -+ -+reselect: -+ /* setting of timeout */ -+ timeout.tv_sec = 1; /* 1 sec */ -+ timeout.tv_usec = 0; /* 0 usec */ -+ -+ FD_ZERO(&fds); /* clear bits */ -+ FD_SET(pipefdr, &fds); /* set bit of fd in fds */ -+ -+ /* number of file descriptor to want check (0 $B!A(B width-1) */ -+ width = pipefdr + 1; -+ -+ /* select returns number of file descriptors */ -+ if (select(width, &fds, NULL, NULL, &timeout) < 0){ -+ if(DEBUG){ -+ fprintf(stderr, "No file descriptors can't selected, waiting...\n"); -+ } -+ goto reselect; -+ } -+ -+ if (FD_ISSET(pipefdr, &fds)){ -+ /* Now, descriptor of pipe is ready to read */ -+ return; -+ }else{ -+ if(DEBUG){ -+ fprintf(stderr, "Can't read from pipe yet, waiting...\n"); -+ } -+ goto reselect; -+ } -+ -+} -+#endif /* FIX_PIPE_ERROR */ -+ - /*******************************************/ -+#ifdef HAVE_MGCSFX -+int LoadPBM(fname, pinfo, fd) -+ char *fname; -+ PICINFO *pinfo; -+ int fd; -+#else - int LoadPBM(fname, pinfo) - char *fname; - PICINFO *pinfo; -+#endif /* HAVE_MGCSFX */ - /*******************************************/ - { - /* returns '1' on success */ -@@ -50,6 +133,10 @@ - int c, c1; - int maxv, rv; - -+#ifdef FIX_PIPE_ERROR -+ pipefdr = fd; -+#endif -+ - garbage = maxv = rv = 0; - bname = BaseName(fname); - -@@ -57,6 +144,22 @@ - pinfo->comment = (char *) NULL; - - -+#ifdef HAVE_MGCSFX -+ if(fd < 0){ -+ /* open the file */ -+ fp = xv_fopen(fname,"r"); -+ if (!fp) return (pbmError(bname, "can't open file")); -+ -+ /* compute file length */ -+ fseek(fp, 0L, 2); -+ filesize = ftell(fp); -+ fseek(fp, 0L, 0); -+ }else{ -+ fp = fdopen(fd, "r"); -+ if (!fp) return (pbmError(bname, "can't open file")); -+ filesize = 0; /* dummy */ -+ } -+#else - /* open the file */ - fp = xv_fopen(fname,"r"); - if (!fp) return (pbmError(bname, "can't open file")); -@@ -65,6 +168,7 @@ - fseek(fp, 0L, 2); - filesize = ftell(fp); - fseek(fp, 0L, 0); -+#endif /* HAVE_MGCSFX */ - - - /* read the first two bytes of the file to determine which format -@@ -73,7 +177,8 @@ - "P6" = raw pixmap */ - - c = getc(fp); c1 = getc(fp); -- if (c!='P' || c1<'1' || c1>'6') return(pbmError(bname, "unknown format")); -+ if (c!='P' || c1<'1' || (c1>'6' && c1!='8')) /* GRR alpha */ -+ return(pbmError(bname, "unknown format")); - - /* read in header information */ - pinfo->w = getint(fp, pinfo); pinfo->h = getint(fp, pinfo); -@@ -104,6 +209,7 @@ - if (c1=='1' || c1=='4') rv = loadpbm(fp, pinfo, c1=='4' ? 1 : 0); - else if (c1=='2' || c1=='5') rv = loadpgm(fp, pinfo, c1=='5' ? 1 : 0, maxv); - else if (c1=='3' || c1=='6') rv = loadppm(fp, pinfo, c1=='6' ? 1 : 0, maxv); -+ else if (c1=='8') rv = loadpam(fp, pinfo, 1 , maxv); - - fclose(fp); - -@@ -248,7 +354,20 @@ - } - } - else { -+#ifdef FIX_PIPE_ERROR -+ reread: -+ numgot += fread(pic8 + numgot, (size_t) 1, (size_t) w*h - numgot, fp); /* read raw data */ -+ if(errno == EINTR){ -+ if(DEBUG){ -+ fprintf(stderr, -+ "Can't read all data from pipe, call select and waiting...\n"); -+ } -+ ready_read(); -+ goto reread; -+ } -+#else - numgot = fread(pic8, (size_t)1, (size_t)npixels, fp); /* read raw data */ -+#endif - } - } - -@@ -315,7 +434,20 @@ - } - } - else { -+#ifdef FIX_PIPE_ERROR -+ reread: -+ numgot += fread(pic24 + numgot, (size_t) 1, (size_t) w*h*3 - numgot, fp); /* read data */ -+ if(errno == EINTR){ -+ if(DEBUG){ -+ fprintf(stderr, -+ "Can't read all data from pipe, call select and waiting...\n"); -+ } -+ ready_read(); -+ goto reread; -+ } -+#else - numgot = fread(pic24, (size_t) 1, (size_t) bufsize, fp); /* read data */ -+#endif - } - } - -@@ -341,6 +473,122 @@ - } - - -+/*******************************************/ -+static int loadpam(fp, pinfo, raw, maxv) /* unofficial RGBA extension */ -+ FILE *fp; -+ PICINFO *pinfo; -+ int raw, maxv; -+{ -+ byte *p, *pix, *pic24, *linebuf, scale[256], bgR, bgG, bgB, r, g, b, a; -+ int i, j, bitshift, w, h, npixels, bufsize, linebufsize, holdmaxv; -+ -+ w = pinfo->w; -+ h = pinfo->h; -+ -+ npixels = w * h; -+ bufsize = 3*npixels; -+ linebufsize = 4*w; -+ if (w <= 0 || h <= 0 || npixels/w != h || bufsize/3 != npixels || -+ linebufsize/4 != w) -+ return pbmError(bname, "image dimensions too large"); -+ -+ /* allocate 24-bit image */ -+ pic24 = (byte *) calloc((size_t) bufsize, (size_t) 1); -+ if (!pic24) FatalError("couldn't malloc 'pic24' for PAM"); -+ -+ /* allocate line buffer for pre-composited RGBA data */ -+ linebuf = (byte *) malloc((size_t) linebufsize); -+ if (!linebuf) { -+ free(pic24); -+ FatalError("couldn't malloc 'linebuf' for PAM"); -+ } -+ -+ pinfo->pic = pic24; -+ pinfo->type = PIC24; -+ sprintf(pinfo->fullInfo, "PAM, %s format. (%ld bytes)", -+ (raw) ? "raw" : "ascii", filesize); -+ sprintf(pinfo->shrtInfo, "%dx%d PAM.", w, h); -+ pinfo->colType = F_FULLCOLOR; -+ -+ -+ /* if maxv>255, keep dropping bits until it's reasonable */ -+ holdmaxv = maxv; -+ bitshift = 0; -+ while (maxv>255) { maxv = maxv>>1; bitshift++; } -+ -+ -+ numgot = 0; -+ -+ if (!raw) { /* GRR: not alpha-ready */ -+ return pbmError(bname, "can't handle non-raw PAM image"); -+/* -+ for (i=0, pix=pic24; i<h; i++) { -+ if ((i&0x3f)==0) WaitCursor(); -+ for (j=0; j<w*3; j++, pix++) -+ *pix = (byte) (getint(fp, pinfo) >> bitshift); -+ } -+ */ -+ } -+ else { /* raw */ -+ if (holdmaxv>255) { /* GRR: not alpha-ready */ -+ return pbmError(bname, "can't handle PAM image with maxval > 255"); -+/* -+ for (i=0, pix=pic24; i<h; i++) { -+ if ((i&0x3f)==0) WaitCursor(); -+ for (j=0; j<w*3; j++,pix++) -+ *pix = (byte) (getshort(fp) >> bitshift); -+ } -+ */ -+ } -+ else { -+ if (have_imagebg) { /* GRR: alpha-ready */ -+ bgR = (imagebgR >> 8); -+ bgG = (imagebgG >> 8); -+ bgB = (imagebgB >> 8); -+ } else { -+ bgR = bgG = bgB = 0; -+ } -+ for (i=0, pix=pic24; i<h; i++) { -+ numgot += fread(linebuf, (size_t) 1, (size_t) linebufsize, fp); /* read data */ -+ if ((i&0x3f)==0) WaitCursor(); -+ for (j=0, p=linebuf; j<w; j++) { -+ r = *p++; -+ g = *p++; -+ b = *p++; -+ a = *p++; -+ alpha_composite(*pix++, r, a, bgR) -+ alpha_composite(*pix++, g, a, bgG) -+ alpha_composite(*pix++, b, a, bgB) -+ } -+ } -+ } -+ } -+ -+ free(linebuf); -+ -+ /* in principle this could overflow, but not critical */ -+ if (numgot != w*h*4) pbmError(bname, TRUNCSTR); -+ -+ if (garbage) -+ return(pbmError(bname, "Garbage characters in image data.")); -+ -+ -+ /* have to scale up all RGB values (Conv24to8 expects RGB values to -+ range from 0-255) */ -+ -+ if (maxv<255) { -+ for (i=0; i<=maxv; i++) scale[i] = (i * 255) / maxv; -+ -+ for (i=0, pix=pic24; i<h; i++) { -+ if ((i&0x3f)==0) WaitCursor(); -+ for (j=0; j<w*3; j++, pix++) *pix = scale[*pix]; -+ } -+ } -+ -+ return 1; -+} -+ -+ - - /*******************************************/ - static int getint(fp, pinfo) -diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c ---- xv-3.10a-bugfixes/xvpcd.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvpcd.c 2005-04-26 00:25:13.000000000 -0700 -@@ -0,0 +1,1307 @@ +diff -u -r --new-file xv-3.10a.orig/xvpcd.c xv-3.10a/xvpcd.c +--- xv-3.10a.orig/xvpcd.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvpcd.c 2007-05-13 20:02:13.000000000 -0500 +@@ -0,0 +1,1311 @@ +/* + * xvpcd.c - load routine for 'PhotoCD' format pictures + * @@ -15444,11 +8509,15 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + */ + +#include "xv.h" -+#include <memory.h> + +#ifdef HAVE_PCD + -+#define TRACE 0 ++#include <memory.h> ++#ifndef alloca ++# include <alloca.h> /* "not in POSIX or SUSv3" according to Linux man page */ ++#endif /* ...but required for Sun C compiler (alloca = macro) */ ++ ++#define TRACE 0 +#if TRACE +# define trace(x) fprintf x +#else @@ -15464,7 +8533,7 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + +#ifdef __STDC__ +static void magnify(int, int, int, int, int, byte *); -+static int pcdError(char *, char *); ++static int pcdError(const char *, const char *); +static int gethuffdata(byte *, byte *, byte *, int, int); +#else +static void magnify(); @@ -15472,12 +8541,12 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c +static int gethuffdata(); +#endif + -+#define wcurfactor 16 /* Call WaitCursor() every n rows */ ++#define wcurfactor 16 /* Call WaitCursor() every n rows */ + -+static int size; /* Set by window routines */ -+static int leaveitup;/* Cleared by docmd() when OK or CANCEL pressed */ -+static int goforit; /* Set to 1 if OK or 0 if CANCEL */ -+static FILE *fp; ++static int size; /* Set by window routines */ ++static int leaveitup;/* Cleared by docmd() when OK or CANCEL pressed */ ++static int goforit; /* Set to 1 if OK or 0 if CANCEL */ ++static FILE *fp; +static CBUTT lutCB; + +/* @@ -15485,47 +8554,47 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + * Why there are 351 entries and not 346 as per Kodak documentation + * is a mystery. + */ -+static double rscale = 1.00, -+ gscale = 1.00, -+ bscale = 1.00; -+ -+static byte Y[351] = { -+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, -+ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, -+ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, -+ 30, 32, 33, 34, 35, 36, 37, 38, 39, 40, -+ 41, 42, 43, 45, 46, 47, 48, 49, 50, 51, -+ 52, 53, 54, 56, 57, 58, 59, 60, 61, 62, -+ 63, 64, 66, 67, 68, 69, 70, 71, 72, 73, -+ 74, 76, 77, 78, 79, 80, 81, 82, 83, 84, -+ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, -+ 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, -+ 107, 108, 110, 111, 112, 113, 114, 115, 116, 117, -+ 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, -+ 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, -+ 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, -+ 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, -+ 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, -+ 169, 170, 171, 172, 173, 174, 175, 176, 176, 177, -+ 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, -+ 188, 189, 190, 191, 192, 193, 193, 194, 195, 196, -+ 197, 198, 199, 200, 201, 201, 202, 203, 204, 205, -+ 206, 207, 207, 208, 209, 210, 211, 211, 212, 213, -+ 214, 215, 215, 216, 217, 218, 218, 219, 220, 221, -+ 221, 222, 223, 224, 224, 225, 226, 226, 227, 228, -+ 228, 229, 230, 230, 231, 232, 232, 233, 234, 234, -+ 235, 236, 236, 237, 237, 238, 238, 239, 240, 240, -+ 241, 241, 242, 242, 243, 243, 244, 244, 245, 245, -+ 245, 246, 246, 247, 247, 247, 248, 248, 248, 249, -+ 249, 249, 249, 250, 250, 250, 250, 251, 251, 251, -+ 251, 251, 252, 252, 252, 252, 252, 253, 253, 253, -+ 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, -+ 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, -+ 254, 254, 254, 254, 254, 254, 254, 254, 254, 255, -+ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, -+ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, -+ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, -+ 255 ++static double rscale = 1.00, ++ gscale = 1.00, ++ bscale = 1.00; ++ ++static byte Y[351] = { ++ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, ++ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, ++ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, ++ 30, 32, 33, 34, 35, 36, 37, 38, 39, 40, ++ 41, 42, 43, 45, 46, 47, 48, 49, 50, 51, ++ 52, 53, 54, 56, 57, 58, 59, 60, 61, 62, ++ 63, 64, 66, 67, 68, 69, 70, 71, 72, 73, ++ 74, 76, 77, 78, 79, 80, 81, 82, 83, 84, ++ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, ++ 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, ++ 107, 108, 110, 111, 112, 113, 114, 115, 116, 117, ++ 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, ++ 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, ++ 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, ++ 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, ++ 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, ++ 169, 170, 171, 172, 173, 174, 175, 176, 176, 177, ++ 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, ++ 188, 189, 190, 191, 192, 193, 193, 194, 195, 196, ++ 197, 198, 199, 200, 201, 201, 202, 203, 204, 205, ++ 206, 207, 207, 208, 209, 210, 211, 211, 212, 213, ++ 214, 215, 215, 216, 217, 218, 218, 219, 220, 221, ++ 221, 222, 223, 224, 224, 225, 226, 226, 227, 228, ++ 228, 229, 230, 230, 231, 232, 232, 233, 234, 234, ++ 235, 236, 236, 237, 237, 238, 238, 239, 240, 240, ++ 241, 241, 242, 242, 243, 243, 244, 244, 245, 245, ++ 245, 246, 246, 247, 247, 247, 248, 248, 248, 249, ++ 249, 249, 249, 250, 250, 250, 250, 251, 251, 251, ++ 251, 251, 252, 252, 252, 252, 252, 253, 253, 253, ++ 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, ++ 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, ++ 254, 254, 254, 254, 254, 254, 254, 254, 254, 255, ++ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, ++ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, ++ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, ++ 255 +}; + +/*******************************************/ @@ -15537,128 +8606,128 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c +{ + long offset; + int mag; -+ int rotate; -+ byte header[3*0x800]; -+ byte *pic24, *luma, *chroma1, *chroma2, *ptr, *lptr, *c1ptr, *c2ptr; ++ int rotate; ++ byte header[3*0x800]; ++ byte *pic24, *luma, *chroma1, *chroma2, *ptr, *lptr, *c1ptr, *c2ptr; + int w, h, npixels, bufsize; + int row, col; -+ int huffplanes; -+ char *bname; ++ int huffplanes; ++ const char *bname; + -+ bname = BaseName(fname); -+ pinfo->pic = NULL; -+ pinfo->comment = NULL; ++ bname = BaseName(fname); ++ pinfo->pic = NULL; ++ pinfo->comment = NULL; + + -+ /* -+ * open the file -+ */ -+ if((fp=fopen(fname,"r")) == NULL) -+ return pcdError(bname, "can't open file"); ++ /* ++ * open the file ++ */ ++ if((fp=fopen(fname,"r")) == NULL) ++ return pcdError(bname, "can't open file"); + -+ /* -+ * inspect the header -+ */ -+ if(fread(&header[0], 1, sizeof(header), fp) != sizeof(header)) -+ return pcdError(bname, "could not load PCD header"); -+ if(strncmp(&header[0x800], "PCD_", 4) != 0) -+ return pcdError(bname, "not a PCD file"); -+ rotate = header[0x0E02] & 0x03; ++ /* ++ * inspect the header ++ */ ++ if(fread(&header[0], 1, sizeof(header), fp) != sizeof(header)) ++ return pcdError(bname, "could not load PCD header"); ++ if(strncmp((char *)&header[0x800], "PCD_", 4) != 0) ++ return pcdError(bname, "not a PCD file"); ++ rotate = header[0x0E02] & 0x03; + +/* base/16 -+ - plain data starts at sector 1+2+1=4 -+ (numbered from 0, ie. the 5th sector) -+ - luma 192*128 = 24576 bytes (12 sectors) -+ + chroma1 96*64 = 6144 bytes (3 sectors) -+ + chroma2 96*64 = 6144 bytes (3 sectors) -+ = total 18 sectors ++ - plain data starts at sector 1+2+1=4 ++ (numbered from 0, ie. the 5th sector) ++ - luma 192*128 = 24576 bytes (12 sectors) ++ + chroma1 96*64 = 6144 bytes (3 sectors) ++ + chroma2 96*64 = 6144 bytes (3 sectors) ++ = total 18 sectors + -+ - NB. "Plain" data is interleaved - 2 luma rows 192 wide, -+ then 1 of each of the chroma rows 96 wide ! ++ - NB. "Plain" data is interleaved - 2 luma rows 192 wide, ++ then 1 of each of the chroma rows 96 wide ! + + base/4 -+ - plain data starts at sector 1+2+1+18+1=23 -+ - luma 384*256 = 98304 bytes (48 sectors) -+ + chroma1 192*128 = 24576 bytes (12 sectors) -+ + chroma2 192*128 = 24576 bytes (12 sectors) -+ = total 72 sectors ++ - plain data starts at sector 1+2+1+18+1=23 ++ - luma 384*256 = 98304 bytes (48 sectors) ++ + chroma1 192*128 = 24576 bytes (12 sectors) ++ + chroma2 192*128 = 24576 bytes (12 sectors) ++ = total 72 sectors + -+ - NB. "Plain" data is interleaved - 2 luma rows 384 wide, -+ then 1 of each of the chroma rows 192 wide ! ++ - NB. "Plain" data is interleaved - 2 luma rows 384 wide, ++ then 1 of each of the chroma rows 192 wide ! + + base -+ - plain data starts at sector 1+2+1+18+1+72+1=96 ++ - plain data starts at sector 1+2+1+18+1+72+1=96 + -+ - luma 768*512 = 393216 bytes (192 sectors) -+ + chroma1 384*256 = 98304 bytes (48 sectors) -+ + chroma2 384*256 = 98304 bytes (48 sectors) -+ = total 288 sectors ++ - luma 768*512 = 393216 bytes (192 sectors) ++ + chroma1 384*256 = 98304 bytes (48 sectors) ++ + chroma2 384*256 = 98304 bytes (48 sectors) ++ = total 288 sectors + -+ - NB. "Plain" data is interleaved - 2 luma rows 768 wide, -+ then 1 of each of the chroma rows 384 wide ! ++ - NB. "Plain" data is interleaved - 2 luma rows 768 wide, ++ then 1 of each of the chroma rows 384 wide ! + + 4base -+ - plain data for base is read -+ - luma data interpolated *2 -+ - chroma data interpolated *4 ++ - plain data for base is read ++ - luma data interpolated *2 ++ - chroma data interpolated *4 + -+ - cd_offset is 1+2+1+18+1+72+1+288=384 -+ - at cd_offset+4 (388) is huffman table -+ - at cd_offset+5 (389) is 4base luma plane ++ - cd_offset is 1+2+1+18+1+72+1+288=384 ++ - at cd_offset+4 (388) is huffman table ++ - at cd_offset+5 (389) is 4base luma plane + -+ (the sector at cd_offset+3 seems to contain 256 words each of -+ which is an offset presumably to the sector containing certain -+ rows ? rows/4 given 1024 possible rows. The rest of this sector -+ is filled with zeroes) ++ (the sector at cd_offset+3 seems to contain 256 words each of ++ which is an offset presumably to the sector containing certain ++ rows ? rows/4 given 1024 possible rows. The rest of this sector ++ is filled with zeroes) + + + 16base -+ - plain data for base is read -+ - luma data interpolated *2 -+ - chroma data interpolated *4 -+ -+ - cd_offset is 1+2+1+18+1+72+1+288=384 -+ - at cd_offset+4 (388) is huffman table for 4 base -+ - at cd_offset+5 (389) is 4base luma plane -+ - luma plane interpolated *2 -+ -+ - cd_offset is set to current position (should be start of sector) -+ - at cd_offset+12 is huffman table for 16 base -+ - at cd_offset+14 is 16 base luma & 2 chroma planes which are read ++ - plain data for base is read ++ - luma data interpolated *2 ++ - chroma data interpolated *4 ++ ++ - cd_offset is 1+2+1+18+1+72+1+288=384 ++ - at cd_offset+4 (388) is huffman table for 4 base ++ - at cd_offset+5 (389) is 4base luma plane ++ - luma plane interpolated *2 ++ ++ - cd_offset is set to current position (should be start of sector) ++ - at cd_offset+12 is huffman table for 16 base ++ - at cd_offset+14 is 16 base luma & 2 chroma planes which are read + (note that the luma plane comes first, with a sync pattern + announcing each row from 0 to 2047, then the two chroma planes + are interleaved by row, the row # being even from 0 to 2046, with + each row containing 1536 values, the chroma1 row coming first, + finally followed by a sync pattern with a row of 2048 announcing + the end (its plane seems to be set to 3, ie. chroma2) -+ - chroma planes interpolated *2 ++ - chroma planes interpolated *2 + -+ (the sector at cd_offset+10 & 11 seem to contain 1024 pairs of words ++ (the sector at cd_offset+10 & 11 seem to contain 1024 pairs of words + the first for luma and the second for chroma, each of -+ which is an offset presumably to the sector containing certain -+ rows ? rows/2 given 2048 possible rows) ++ which is an offset presumably to the sector containing certain ++ rows ? rows/2 given 2048 possible rows) + +Not yet implemented: + +In order to do overskip for base and 4base, one has to reach the chroma +data for 16 base: + -+ - for 4base, after reading the 4base luma plane (and presumably -+ skipping the chroma planes) one sets cd_offset to the start of -+ the "current" sector ++ - for 4base, after reading the 4base luma plane (and presumably ++ skipping the chroma planes) one sets cd_offset to the start of ++ the "current" sector + -+ - for base, one has to skip the 4base data first: -+ - cd_offset is set to 384 -+ - at (cd_offset+3 sectors)[510] is a 16 bit word high byte 1st -+ containing an offset to the beginning of the 16base stuff -+ though there is then a loop until >30 0xff's start a sector ! ++ - for base, one has to skip the 4base data first: ++ - cd_offset is set to 384 ++ - at (cd_offset+3 sectors)[510] is a 16 bit word high byte 1st ++ containing an offset to the beginning of the 16base stuff ++ though there is then a loop until >30 0xff's start a sector ! + -+ - being now positioned after the end of the 4base stuff, -+ - at (cd_offset+10 sectors)[2] is a 16 bit word high byte 1st -+ containing an offset to the chroma planes. -+ - at cd_offset+12 is the set of huffman tables ++ - being now positioned after the end of the 4base stuff, ++ - at (cd_offset+10 sectors)[2] is a 16 bit word high byte 1st ++ containing an offset to the chroma planes. ++ - at cd_offset+12 is the set of huffman tables + -+ - for base, the 16base chroma planes are then halved ++ - for base, the 16base chroma planes are then halved +*/ + + PCDSetParamOptions(bname); @@ -15668,7 +8737,7 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + SetCursors(-1); /* Somebody has already set it to wait :( */ + leaveitup=1; + goforit=0; -+ size = 1; ++ size = 1; + /* block until the popup window gets closed */ + while (leaveitup) { + int i; @@ -15689,268 +8758,268 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + goforit = 1; + } + -+ if(lutCB.val) -+ rscale = gscale = bscale = 255.0/346.0; -+ else -+ rscale = gscale = bscale = 1.0; ++ if(lutCB.val) ++ rscale = gscale = bscale = 255.0/346.0; ++ else ++ rscale = gscale = bscale = 1.0; ++ ++ switch (size) { ++ case 0: ++ pinfo->w = 192; ++ pinfo->h = 128; ++ offset=4*0x800; ++ mag=1; ++ huffplanes=0; ++ sprintf(pinfo->fullInfo, "PhotoCD, base/16 resolution"); ++ break; + -+ switch (size) { -+ case 0: -+ pinfo->w = 192; -+ pinfo->h = 128; -+ offset=4*0x800; -+ mag=1; -+ huffplanes=0; -+ sprintf(pinfo->fullInfo, "PhotoCD, base/16 resolution"); -+ break; ++ case 1: ++ pinfo->w = 384; ++ pinfo->h = 256; ++ offset=23*0x800; ++ mag=1; ++ huffplanes=0; ++ sprintf(pinfo->fullInfo, "PhotoCD, base/4 resolution"); ++ break; + -+ case 1: -+ pinfo->w = 384; -+ pinfo->h = 256; -+ offset=23*0x800; -+ mag=1; -+ huffplanes=0; -+ sprintf(pinfo->fullInfo, "PhotoCD, base/4 resolution"); -+ break; ++ case 2: ++ default: ++ pinfo->w = 768; ++ pinfo->h = 512; ++ offset=96*0x800; ++ mag=1; ++ huffplanes=0; ++ sprintf(pinfo->fullInfo, "PhotoCD, base resolution"); ++ break; + -+ case 2: -+ default: -+ pinfo->w = 768; -+ pinfo->h = 512; -+ offset=96*0x800; -+ mag=1; -+ huffplanes=0; -+ sprintf(pinfo->fullInfo, "PhotoCD, base resolution"); -+ break; ++ case 3: ++ pinfo->w = 1536; ++ pinfo->h = 1024; ++ offset=96*0x800; ++ mag=2; ++ huffplanes=1; ++ sprintf(pinfo->fullInfo, "PhotoCD, 4base resolution"); ++ break; + -+ case 3: -+ pinfo->w = 1536; -+ pinfo->h = 1024; -+ offset=96*0x800; -+ mag=2; -+ huffplanes=1; -+ sprintf(pinfo->fullInfo, "PhotoCD, 4base resolution"); -+ break; ++ case 4: ++ pinfo->w=3072; ++ pinfo->h=2048; ++ offset=96*0x800; ++ mag=4; ++ huffplanes=2; ++ sprintf(pinfo->fullInfo, "PhotoCD, 16base resolution"); ++ break; ++ } + -+ case 4: -+ pinfo->w=3072; -+ pinfo->h=2048; -+ offset=96*0x800; -+ mag=4; -+ huffplanes=2; -+ sprintf(pinfo->fullInfo, "PhotoCD, 16base resolution"); -+ break; -+ } ++ /* ++ * rotate? ++ */ ++ w = pinfo->w; ++ h = pinfo->h; ++ switch(rotate) { ++ case 0: ++ break; + -+ /* -+ * rotate? -+ */ -+ w = pinfo->w; -+ h = pinfo->h; -+ switch(rotate) { -+ case 0: -+ break; ++ case 1: ++ case 3: ++ pinfo->w = h; ++ pinfo->h = w; ++ break; + -+ case 1: -+ case 3: -+ pinfo->w = h; -+ pinfo->h = w; -+ break; ++ default: ++ fprintf(stderr, "unknown image rotate %d; assuming none\n", ++ rotate); ++ rotate = 0; ++ } + -+ default: -+ fprintf(stderr, "unknown image rotate %d; assuming none\n", -+ rotate); -+ rotate = 0; -+ } ++ /* ++ * allocate 24-bit image ++ */ ++ npixels = pinfo->w * pinfo->h; ++ bufsize = 3 * npixels; ++ if (pinfo->w <= 0 || pinfo->h <= 0 || npixels/pinfo->w != pinfo->h || ++ bufsize/3 != npixels) ++ FatalError("image dimensions out of range"); + -+ /* -+ * allocate 24-bit image -+ */ -+ npixels = pinfo->w * pinfo->h; -+ bufsize = 3 * npixels; -+ if (pinfo->w <= 0 || pinfo->h <= 0 || npixels/pinfo->w != pinfo->h || -+ bufsize/3 != npixels) -+ FatalError("image dimensions out of range"); ++ pinfo->pic = (byte *)malloc((size_t) bufsize); ++ if(!pinfo->pic) ++ FatalError("couldn't malloc '24-bit RGB plane'"); + -+ pinfo->pic = (byte *)malloc((size_t) bufsize); -+ if(!pinfo->pic) -+ FatalError("couldn't malloc '24-bit RGB plane'"); ++ pinfo->type = PIC24; ++ sprintf(pinfo->shrtInfo, "%dx%d PhotoCD.", pinfo->w, pinfo->h); ++ pinfo->colType = F_FULLCOLOR; ++ pinfo->frmType = -1; + -+ pinfo->type = PIC24; -+ sprintf(pinfo->shrtInfo, "%dx%d PhotoCD.", pinfo->w, pinfo->h); -+ pinfo->colType = F_FULLCOLOR; -+ pinfo->frmType = -1; ++ if(fseek(fp, offset, SEEK_SET) == -1) { ++ free(pinfo->pic); ++ return pcdError(bname,"Can't find start of data."); ++ } + -+ if(fseek(fp, offset, SEEK_SET) == -1) { -+ free(pinfo->pic); -+ return pcdError(bname,"Can't find start of data."); -+ } ++ pic24 = pinfo->pic; + -+ pic24 = pinfo->pic; ++ luma=(byte *)calloc(npixels,1); ++ if(!luma) { ++ free(pinfo->pic); ++ FatalError("couldn't malloc 'luma plane'"); ++ } + -+ luma=(byte *)calloc(npixels,1); -+ if(!luma) { -+ free(pinfo->pic); -+ FatalError("couldn't malloc 'luma plane'"); -+ } ++ chroma1=(byte *)calloc(npixels/4,1); ++ if(!chroma1) { ++ free(pinfo->pic); ++ free(luma); ++ FatalError("couldn't malloc 'chroma1 plane'"); ++ } + -+ chroma1=(byte *)calloc(npixels/4,1); -+ if(!chroma1) { -+ free(pinfo->pic); -+ free(luma); -+ FatalError("couldn't malloc 'chroma1 plane'"); -+ } ++ chroma2=(byte *)calloc(npixels/4,1); ++ if(!chroma2) { ++ free(pinfo->pic); ++ free(luma); ++ free(chroma1); ++ FatalError("couldn't malloc 'chroma2 plane'"); ++ } + -+ chroma2=(byte *)calloc(npixels/4,1); -+ if(!chroma2) { -+ free(pinfo->pic); -+ free(luma); -+ free(chroma1); -+ FatalError("couldn't malloc 'chroma2 plane'"); -+ } ++ /* Read 2 luma rows length w, then one of each chroma rows w/2 */ ++ /* If a mag factor is active, the small image is read into the */ ++ /* top right hand corner of the larger allocated image */ + -+ /* Read 2 luma rows length w, then one of each chroma rows w/2 */ -+ /* If a mag factor is active, the small image is read into the */ -+ /* top right hand corner of the larger allocated image */ ++ trace((stderr, "base image: start @ 0x%08lx (sector %ld.%ld)\n", ++ ftell(fp), ftell(fp)/0x800, ftell(fp) % 0x800)); ++ for(row=0,lptr=luma,c1ptr=chroma1,c2ptr=chroma2; row <h/mag; ++ row+=2,lptr+=w*2,c1ptr+=w/2,c2ptr+=w/2) { ++ if(fread(lptr, 1, w/mag, fp) != w/mag) { ++ pcdError(bname, "Luma plane too short."); ++ break; ++ } ++ if(fread(lptr+w, 1, w/mag, fp) != w/mag) { ++ pcdError(bname, "Luma plane too short."); ++ break; ++ } ++ if(fread(c1ptr, 1, w/2/mag, fp) != w/2/mag) { ++ pcdError(bname, "Chroma1 plane too short."); ++ break; ++ } ++ if(fread(c2ptr, 1, w/2/mag, fp) != w/2/mag) { ++ pcdError(bname, "Chroma2 plane too short."); ++ break; ++ } ++ if(row%wcurfactor == 0) ++ WaitCursor(); ++ } ++ trace((stderr, "base image: done @ 0x%08lx (sector %ld.%ld)\n", ++ ftell(fp), ftell(fp)/0x800, ftell(fp) % 0x800)); + -+ trace((stderr, "base image: start @ 0x%08lx (sector %ld.%ld)\n", -+ ftell(fp), ftell(fp)/0x800, ftell(fp) % 0x800)); -+ for(row=0,lptr=luma,c1ptr=chroma1,c2ptr=chroma2; row <h/mag; -+ row+=2,lptr+=w*2,c1ptr+=w/2,c2ptr+=w/2) { -+ if(fread(lptr, 1, w/mag, fp) != w/mag) { -+ pcdError(bname, "Luma plane too short."); -+ break; -+ } -+ if(fread(lptr+w, 1, w/mag, fp) != w/mag) { -+ pcdError(bname, "Luma plane too short."); -+ break; -+ } -+ if(fread(c1ptr, 1, w/2/mag, fp) != w/2/mag) { -+ pcdError(bname, "Chroma1 plane too short."); -+ break; -+ } -+ if(fread(c2ptr, 1, w/2/mag, fp) != w/2/mag) { -+ pcdError(bname, "Chroma2 plane too short."); -+ break; -+ } -+ if(row%wcurfactor == 0) -+ WaitCursor(); -+ } -+ trace((stderr, "base image: done @ 0x%08lx (sector %ld.%ld)\n", -+ ftell(fp), ftell(fp)/0x800, ftell(fp) % 0x800)); -+ -+ if(huffplanes) { -+ if(fseek(fp, 388*0x800, SEEK_SET) == -1) -+ return pcdError(bname, -+ "Can't find start of huffman tables."); -+ -+ magnify(2, h/mag, w/mag, h, w, luma); -+ magnify(2, h/2/mag, w/2/mag, h/2, w/2, chroma1); -+ magnify(2, h/2/mag, w/2/mag, h/2, w/2, chroma2); -+ -+ /* -+ * doesn't really touch the chroma planes which aren't -+ * present in 4base -+ */ -+ gethuffdata(luma, chroma1, chroma2, w, h/mag*2); -+ -+ /* -+ * if only doing 4base should probably fetch 16bases -+ * chroma planes here -+ */ -+ if(huffplanes == 2) { -+ /* -+ * This depends on gethuffdata() having grabbed -+ * things in 0x800 sectors AND still being -+ * positioned in the "last" sector of the data -+ * (cf. Hadmut's code which is positioned at start -+ * of the next sector) -+ */ -+ long offset = ftell(fp)/0x800+12; -+ -+ if(fseek(fp, offset*0x800, SEEK_SET) == 0) { -+ magnify(2,h/2,w/2,h,w,luma); -+ magnify(2,h/4,w/4,h/2,w/2,chroma1); -+ magnify(2,h/4,w/4,h/2,w/2,chroma2); -+ gethuffdata(luma,chroma1,chroma2,w,h); -+ } else -+ fprintf(stderr, "can't seek to 2nd huffman tables\n"); -+ } -+ } -+ fclose(fp); ++ if(huffplanes) { ++ if(fseek(fp, 388*0x800, SEEK_SET) == -1) ++ return pcdError(bname, ++ "Can't find start of huffman tables."); + -+ /* -+ * YCC -> R'G'B' and image rotate -+ */ -+ ptr=pic24; -+ lptr=luma; c1ptr=chroma1; c2ptr=chroma2; -+ for(row = 0; row < h; ++row) { -+ byte *rowc1ptr = c1ptr, -+ *rowc2ptr = c2ptr; -+ int k = 0; -+ -+ switch(rotate) { -+ case 1: -+ ptr = &pic24[row*3 + (w - 1)*h*3]; -+ k = -3*(h + 1); -+ break; ++ magnify(2, h/mag, w/mag, h, w, luma); ++ magnify(2, h/2/mag, w/2/mag, h/2, w/2, chroma1); ++ magnify(2, h/2/mag, w/2/mag, h/2, w/2, chroma2); + -+ case 3: -+ ptr = &pic24[(h - 1 - row)*3]; -+ k = 3*(h - 1); -+ break; ++ /* ++ * doesn't really touch the chroma planes which aren't ++ * present in 4base ++ */ ++ gethuffdata(luma, chroma1, chroma2, w, h/mag*2); + -+ default: -+ ptr = &pic24[row*w*3]; -+ k = 0; -+ break; -+ } -+ for(col = 0; col < w; ++col) { -+ double L = 1.3584*(double) *lptr++, -+ C1 = 2.2179*(double) (*c1ptr - 156), -+ C2 = 1.8215*(double) (*c2ptr - 137); -+ int r = rscale*(L + C2), -+ g = gscale*(L - 0.194*C1 - 0.509*C2), -+ b = bscale*(L + C1); -+ -+ if(lutCB.val) { -+ if(r < 0) r = 0; else if(r >= 255) r = 255; -+ if(g < 0) g = 0; else if(g >= 255) g = 255; -+ if(b < 0) b = 0; else if(b >= 255) b = 255; -+ } else { -+ if(r < 0) r = 0; else if(r >= 351) r = 350; -+ if(g < 0) g = 0; else if(g >= 351) g = 350; -+ if(b < 0) b = 0; else if(b >= 351) b = 350; -+ r = Y[r]; g = Y[g]; b = Y[b]; -+ } -+ *ptr++ = r; -+ *ptr++ = g; -+ *ptr++ = b; -+ ptr += k; -+ if(col & 1) { -+ ++c1ptr; -+ ++c2ptr; -+ } -+ } -+ if((row & 1) == 0) { -+ c1ptr = rowc1ptr; -+ c2ptr = rowc2ptr; -+ } -+ if(row%wcurfactor == 0) -+ WaitCursor(); -+ } -+ free(luma); free(chroma1); free(chroma2); -+ return 1; ++ /* ++ * if only doing 4base should probably fetch 16bases ++ * chroma planes here ++ */ ++ if(huffplanes == 2) { ++ /* ++ * This depends on gethuffdata() having grabbed ++ * things in 0x800 sectors AND still being ++ * positioned in the "last" sector of the data ++ * (cf. Hadmut's code which is positioned at start ++ * of the next sector) ++ */ ++ long offset = ftell(fp)/0x800+12; ++ ++ if(fseek(fp, offset*0x800, SEEK_SET) == 0) { ++ magnify(2,h/2,w/2,h,w,luma); ++ magnify(2,h/4,w/4,h/2,w/2,chroma1); ++ magnify(2,h/4,w/4,h/2,w/2,chroma2); ++ gethuffdata(luma,chroma1,chroma2,w,h); ++ } else ++ fprintf(stderr, "can't seek to 2nd huffman tables\n"); ++ } ++ } ++ fclose(fp); ++ ++ /* ++ * YCC -> R'G'B' and image rotate ++ */ ++ ptr=pic24; ++ lptr=luma; c1ptr=chroma1; c2ptr=chroma2; ++ for(row = 0; row < h; ++row) { ++ byte *rowc1ptr = c1ptr, ++ *rowc2ptr = c2ptr; ++ int k = 0; ++ ++ switch(rotate) { ++ case 1: ++ ptr = &pic24[row*3 + (w - 1)*h*3]; ++ k = -3*(h + 1); ++ break; ++ ++ case 3: ++ ptr = &pic24[(h - 1 - row)*3]; ++ k = 3*(h - 1); ++ break; ++ ++ default: ++ ptr = &pic24[row*w*3]; ++ k = 0; ++ break; ++ } ++ for(col = 0; col < w; ++col) { ++ double L = 1.3584*(double) *lptr++, ++ C1 = 2.2179*(double) (*c1ptr - 156), ++ C2 = 1.8215*(double) (*c2ptr - 137); ++ int r = rscale*(L + C2), ++ g = gscale*(L - 0.194*C1 - 0.509*C2), ++ b = bscale*(L + C1); ++ ++ if(lutCB.val) { ++ if(r < 0) r = 0; else if(r >= 255) r = 255; ++ if(g < 0) g = 0; else if(g >= 255) g = 255; ++ if(b < 0) b = 0; else if(b >= 255) b = 255; ++ } else { ++ if(r < 0) r = 0; else if(r >= 351) r = 350; ++ if(g < 0) g = 0; else if(g >= 351) g = 350; ++ if(b < 0) b = 0; else if(b >= 351) b = 350; ++ r = Y[r]; g = Y[g]; b = Y[b]; ++ } ++ *ptr++ = r; ++ *ptr++ = g; ++ *ptr++ = b; ++ ptr += k; ++ if(col & 1) { ++ ++c1ptr; ++ ++c2ptr; ++ } ++ } ++ if((row & 1) == 0) { ++ c1ptr = rowc1ptr; ++ c2ptr = rowc2ptr; ++ } ++ if(row%wcurfactor == 0) ++ WaitCursor(); ++ } ++ free(luma); free(chroma1); free(chroma2); ++ return 1; +} + +/* + * derived from Hadmut Danisch's interpolate() + */ +static void -+magnify(int mag, /* power of 2 by which to magnify in place */ -+ int h, int w, /* the "start" unmag'd dimensions of the array */ -+ int mh, int mw, /* the real (maximum) dimensions of the array */ -+ byte *p) /* pointer to the data */ ++magnify(int mag, /* power of 2 by which to magnify in place */ ++ int h, int w, /* the "start" unmag'd dimensions of the array */ ++ int mh, int mw, /* the real (maximum) dimensions of the array */ ++ byte *p) /* pointer to the data */ +{ + int x,y,yi; + byte *optr,*nptr,*uptr; /* MUST be unsigned, else averaging fails */ @@ -15964,7 +9033,7 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + + for(y=0;y<h;y++) { + yi=h-1-y; -+ optr=p+ yi*mw + (w-1); /* last pixel of an old row */ ++ optr=p+ yi*mw + (w-1); /* last pixel of an old row */ + nptr=p+2*yi*mw + (2*w - 2); /* last pixel of a new row */ + + nptr[0]=nptr[1]=optr[0]; /* special cases */ @@ -16000,18 +9069,18 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + ((int)*(uptr++))+1)>>1; /* last pixel */ + } + -+ xvbcopy(p + (2*h-2)*mw, /* 2nd last row */ -+ p + (2*h-1)*mw, /* the last row */ -+ 2*w); /* length of a new row */ ++ xvbcopy((char *)(p + (2*h-2)*mw), /* 2nd last row */ ++ (char *)(p + (2*h-1)*mw), /* the last row */ ++ 2*w); /* length of a new row */ + + h*=2; w*=2; -+ mag>>=1; /* Obviously mag must be a power of 2 ! */ ++ mag>>=1; /* Obviously mag must be a power of 2 ! */ + } +} + +/*******************************************/ +static int -+pcdError(char *fname, char *st) ++pcdError(const char *fname, const char *st) +{ + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; @@ -16041,19 +9110,19 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c +/***************************************************/ +void CreatePCDW() +{ -+ int y; ++ int y; + + pcdW = CreateWindow("xv pcd", "XVpcd", NULL, -+ TWIDE, THIGH, infofg, infobg, 0); ++ TWIDE, THIGH, infofg, infobg, 0); + if (!pcdW) FatalError("can't create pcd window!"); + + XSelectInput(theDisp, pcdW, ExposureMask | ButtonPressMask | KeyPressMask); + + BTCreate(&tbut[T_BOK], pcdW, TWIDE-140-1, THIGH-10-BUTTH-1, 60, BUTTH, -+ "Ok", infofg, infobg, hicol, locol); ++ "Ok", infofg, infobg, hicol, locol); + + BTCreate(&tbut[T_BCANC], pcdW, TWIDE-70-1, THIGH-10-BUTTH-1, 60, BUTTH, -+ "Cancel", infofg, infobg, hicol, locol); ++ "Cancel", infofg, infobg, hicol, locol); + + y = 55; + resnRB = RBCreate(NULL, pcdW, 36, y, "192*128 Base/16", @@ -16082,7 +9151,7 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c +{ + if (vis) { + CenterMapWindow(pcdW, tbut[T_BOK].x + tbut[T_BOK].w/2, -+ tbut[T_BOK].y + tbut[T_BOK].h/2, TWIDE, THIGH); ++ tbut[T_BOK].y + tbut[T_BOK].h/2, TWIDE, THIGH); + } + else XUnmapWindow(theDisp, pcdW); + pcdUp = vis; @@ -16135,12 +9204,12 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + + if (e->window == pcdW) { + if (stlen) { -+ if (buf[0] == '\r' || buf[0] == '\n') { /* enter */ -+ FakeButtonPress(&tbut[T_BOK]); -+ } -+ else if (buf[0] == '\033') { /* ESC */ -+ FakeButtonPress(&tbut[T_BCANC]); -+ } ++ if (buf[0] == '\r' || buf[0] == '\n') { /* enter */ ++ FakeButtonPress(&tbut[T_BOK]); ++ } ++ else if (buf[0] == '\033') { /* ESC */ ++ FakeButtonPress(&tbut[T_BCANC]); ++ } + } + } + else rv = 0; @@ -16158,7 +9227,7 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + +/***************************************************/ +void -+PCDSetParamOptions(char *fname) ++PCDSetParamOptions(const char *fname) +{ + int cur; + cur = RBWhich(resnRB); @@ -16176,9 +9245,9 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c +static void +drawTD(int x, int y, int w, int h) +{ -+ char *title = "Load PhotoCD file..."; -+ int i; -+ XRectangle xr; ++ const char *title = "Load PhotoCD file..."; ++ int i; ++ XRectangle xr; + + xr.x = x; xr.y = y; xr.width = w; xr.height = h; + XSetClipRectangles(theDisp, theGC, 0,0, &xr, 1, Unsorted); @@ -16237,12 +9306,12 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + leaveitup=0; + goforit=0; + switch (cmd) { -+ case T_BOK: PCDSetParams(); ++ case T_BOK: PCDSetParams(); + goforit=1; -+ case T_BCANC: PCDDialog(0); ++ case T_BCANC: PCDDialog(0); + break; + -+ default: break; ++ default: break; + } +} + @@ -16268,7 +9337,7 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c + * + * Store the huffman table into tree type structure: + * -+ * int int[n of entries*2] ++ * int int[n of entries*2] + * + * Each entry consists of two words (the 1st for zero and the 2nd for one). + * @@ -16283,171 +9352,171 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c +static void +dumphufftab(int n, const byte *h, int m, const int *t) +{ -+ int j; ++ int j; + -+ for(j = 0; j < n || j < m; ++j) { -+ if(j < m) -+ fprintf(stderr, "%04x %04x ::", 0xffff & t[2*j + 0], -+ 0xffff & t[2*j + 1]); -+ else -+ fprintf(stderr, "%s %s ::", " ", " "); -+ if(j < n) { -+ int k; -+ unsigned l = (h[4*j + 1] << 8) | h[4*j + 2]; -+ -+ fprintf(stderr, " %02x %2d ", h[4*j + 3], h[4*j + 0]); -+ for(k = 0; k <= h[4*j + 0]; ++k, l *= 2) -+ fprintf(stderr, "%c", '0'+((l & 0x8000) != 0)); -+ } -+ fprintf(stderr, "\n"); -+ } ++ for(j = 0; j < n || j < m; ++j) { ++ if(j < m) ++ fprintf(stderr, "%04x %04x ::", 0xffff & t[2*j + 0], ++ 0xffff & t[2*j + 1]); ++ else ++ fprintf(stderr, "%s %s ::", " ", " "); ++ if(j < n) { ++ int k; ++ unsigned l = (h[4*j + 1] << 8) | h[4*j + 2]; ++ ++ fprintf(stderr, " %02x %2d ", h[4*j + 3], h[4*j + 0]); ++ for(k = 0; k <= h[4*j + 0]; ++k, l *= 2) ++ fprintf(stderr, "%c", '0'+((l & 0x8000) != 0)); ++ } ++ fprintf(stderr, "\n"); ++ } +} + +static int * +gethufftable(void) +{ -+ int *hufftab, *h, i, j, N, num, bufsize, huffptr, hufftop; -+ byte *huf; -+ -+ /* -+ * absorb the entirety of the table in one chunk (for better -+ * dumps in case of error) -+ */ -+ trace((stderr, "hufftab 0x%08lx ", ftell(fp))); -+ num = 1 + fgetc(fp); /* 256 max */ -+ huf = (byte *)alloca(4*num*sizeof(byte)); -+ if((i = fread(huf, 1, 4*num, fp)) != 4*num) { -+ fprintf(stderr, "unexpected EOF: got %d bytes, wanted %d\n", -+ i, 4*num); -+ return NULL; -+ } ++ int *hufftab, *h, i, j, N, num, bufsize, huffptr, hufftop; ++ byte *huf; + -+ /* -+ * guess an initial size and prepare the initial entry -+ */ -+ trace((stderr, "length %u\n", num)); -+ N = 2*num; /* 512 max */ -+ bufsize = N * sizeof(int); -+/* this case can't happen, but added for symmetry with loop below -+ if (N/2 != num || bufsize/N != sizeof(int)) { -+ SetISTR(ISTR_WARNING, "Huffman table size out of range"); -+ return NULL; -+ } ++ /* ++ * absorb the entirety of the table in one chunk (for better ++ * dumps in case of error) ++ */ ++ trace((stderr, "hufftab 0x%08lx ", ftell(fp))); ++ num = 1 + fgetc(fp); /* 256 max */ ++ huf = (byte *)alloca(4*num*sizeof(byte)); ++ if((i = fread(huf, 1, 4*num, fp)) != 4*num) { ++ fprintf(stderr, "unexpected EOF: got %d bytes, wanted %d\n", ++ i, 4*num); ++ return NULL; ++ } ++ ++ /* ++ * guess an initial size and prepare the initial entry ++ */ ++ trace((stderr, "length %u\n", num)); ++ N = 2*num; /* 512 max */ ++ bufsize = N * sizeof(int); ++/* this case can't happen, but added for symmetry with loop below ++ if (N/2 != num || bufsize/N != sizeof(int)) { ++ SetISTR(ISTR_WARNING, "Huffman table size out of range"); ++ return NULL; ++ } + */ -+ if((hufftab = (int *)malloc(bufsize)) == NULL) -+ FatalError("couldn't malloc initial Huffman table"); -+ hufftab[0] = hufftab[1] = 0; -+ -+ /* -+ * we check the table for reasonableness; there is a lack of detailed -+ * documentation on this format. in particular, for the base16, -+ * the position of the huffman tables is uncertain to within one -+ * "sector", and we have to detect his before trying to read -+ * bogusness. -+ */ -+ hufftop = 0; -+ for(i = 0; i < num; ++i) { -+ unsigned length = huf[4*i + 0], -+ codeword = (huf[4*i + 1] << 8) | huf[4*i + 2]; -+ -+ /* -+ * some sanity checks -+ */ -+ if(length >= 16) { -+ fprintf(stderr, -+ "gethufftable: improbable length @ %d/%d\n", -+ i, num); -+ dumphufftab(num, huf, hufftop/2, hufftab); -+ free(hufftab); -+ return NULL; -+ } ++ if((hufftab = (int *)malloc(bufsize)) == NULL) ++ FatalError("couldn't malloc initial Huffman table"); ++ hufftab[0] = hufftab[1] = 0; + -+ /* -+ * walk the whole set of codes -+ */ -+ huffptr = 0; -+ for(j = 0; j < 16; ++j, codeword *= 2) { -+ /* -+ * choose the child node -+ */ -+ if(codeword & 0x8000) -+ ++huffptr; -+ -+ /* -+ * store value at end-of-code -+ */ -+ if(j == length) { -+ /* -+ * more sanity -+ */ -+ if((codeword *= 2) & 0xffff) { -+ fprintf(stderr, -+ "gethufftable: " -+ ":probable invalid code @ %d\n", -+ i); -+ dumphufftab(num, huf, -+ hufftop/2, hufftab); -+ free(hufftab); -+ return NULL; -+ } -+ hufftab[huffptr] = 1 + (int) huf[4*i + 3]; -+ break; -+ } ++ /* ++ * we check the table for reasonableness; there is a lack of detailed ++ * documentation on this format. in particular, for the base16, ++ * the position of the huffman tables is uncertain to within one ++ * "sector", and we have to detect his before trying to read ++ * bogusness. ++ */ ++ hufftop = 0; ++ for(i = 0; i < num; ++i) { ++ unsigned length = huf[4*i + 0], ++ codeword = (huf[4*i + 1] << 8) | huf[4*i + 2]; + -+ /* -+ * otherwise, follow the tree to date -+ */ -+ if(hufftab[huffptr] < 0) { -+ huffptr -= hufftab[huffptr]; -+ continue; -+ } else if(hufftab[huffptr] > 0) { -+ fprintf(stderr, "duplicate code %d %d/%d\n", -+ huffptr, i, num); -+ dumphufftab(num, huf, hufftop/2, hufftab); -+ free(hufftab); -+ return NULL; -+ } ++ /* ++ * some sanity checks ++ */ ++ if(length >= 16) { ++ fprintf(stderr, ++ "gethufftable: improbable length @ %d/%d\n", ++ i, num); ++ dumphufftab(num, huf, hufftop/2, hufftab); ++ free(hufftab); ++ return NULL; ++ } ++ ++ /* ++ * walk the whole set of codes ++ */ ++ huffptr = 0; ++ for(j = 0; j < 16; ++j, codeword *= 2) { ++ /* ++ * choose the child node ++ */ ++ if(codeword & 0x8000) ++ ++huffptr; ++ ++ /* ++ * store value at end-of-code ++ */ ++ if(j == length) { ++ /* ++ * more sanity ++ */ ++ if((codeword *= 2) & 0xffff) { ++ fprintf(stderr, ++ "gethufftable: " ++ ":probable invalid code @ %d\n", ++ i); ++ dumphufftab(num, huf, ++ hufftop/2, hufftab); ++ free(hufftab); ++ return NULL; ++ } ++ hufftab[huffptr] = 1 + (int) huf[4*i + 3]; ++ break; ++ } ++ ++ /* ++ * otherwise, follow the tree to date ++ */ ++ if(hufftab[huffptr] < 0) { ++ huffptr -= hufftab[huffptr]; ++ continue; ++ } else if(hufftab[huffptr] > 0) { ++ fprintf(stderr, "duplicate code %d %d/%d\n", ++ huffptr, i, num); ++ dumphufftab(num, huf, hufftop/2, hufftab); ++ free(hufftab); ++ return NULL; ++ } + -+ /* -+ * and if necessary, make the tree bigger -+ */ -+ if((hufftop += 2) >= N) { -+ int oldN = N; ++ /* ++ * and if necessary, make the tree bigger ++ */ ++ if((hufftop += 2) >= N) { ++ int oldN = N; +#if TRACE -+ dumphufftab(num, huf, hufftop/2, hufftab); -+#endif -+ N *= 2; -+ bufsize = N*sizeof(int); -+ if (N/2 != oldN || bufsize/N != sizeof(int)) { -+ SetISTR(ISTR_WARNING, -+ "new Huffman table is too large"); -+ free(hufftab); -+ return NULL; -+ } -+ h = (int *)realloc(hufftab, bufsize); -+ if(h == NULL) { -+ fprintf(stderr, -+ "Table overflow %d/%d\n", -+ i, num); -+ dumphufftab(num, huf, -+ hufftop/2, hufftab); -+ free(hufftab); -+ FatalError( -+ "couldn't realloc Huffman table"); -+ } -+ hufftab = h; -+ } ++ dumphufftab(num, huf, hufftop/2, hufftab); ++#endif ++ N *= 2; ++ bufsize = N*sizeof(int); ++ if (N/2 != oldN || bufsize/N != sizeof(int)) { ++ SetISTR(ISTR_WARNING, ++ "new Huffman table is too large"); ++ free(hufftab); ++ return NULL; ++ } ++ h = (int *)realloc(hufftab, bufsize); ++ if(h == NULL) { ++ fprintf(stderr, ++ "Table overflow %d/%d\n", ++ i, num); ++ dumphufftab(num, huf, ++ hufftop/2, hufftab); ++ free(hufftab); ++ FatalError( ++ "couldn't realloc Huffman table"); ++ } ++ hufftab = h; ++ } + -+ /* -+ * then add new ptr -+ */ -+ hufftab[huffptr] = huffptr - hufftop; -+ huffptr = hufftop; -+ hufftab[huffptr + 0] = -+ hufftab[huffptr + 1] = 0; -+ } -+ } -+ return hufftab; ++ /* ++ * then add new ptr ++ */ ++ hufftab[huffptr] = huffptr - hufftop; ++ huffptr = hufftop; ++ hufftab[huffptr + 0] = ++ hufftab[huffptr + 1] = 0; ++ } ++ } ++ return hufftab; +} + +/* WORDTYPE & char buffer must be unsigned else */ @@ -16559,501 +9628,173 @@ diff -ruN xv-3.10a-bugfixes/xvpcd.c xv-3.10a-enhancements/xvpcd.c +#define skip24() (skipnn(24)) + +static int -+gethuffdata( byte *luma, -+ byte *chroma1, -+ byte *chroma2, -+ int realrowwidth, -+ int maxrownumber) -+{ -+static byte clip[3*256]; -+ int *hufftable[3], *huffstart = NULL, *huffptr = NULL; -+ int row, col, plane, i, result = 1; ++gethuffdata( byte *luma, ++ byte *chroma1, ++ byte *chroma2, ++ int realrowwidth, ++ int maxrownumber) ++{ ++static byte clip[3*256]; ++ int *hufftable[3], *huffstart = NULL, *huffptr = NULL; ++ int row, col, plane, i, result = 1; +#if TRACE -+ int uflow = 0, oflow = 0; ++ int uflow = 0, oflow = 0; +#endif -+ byte *pixelptr = NULL; -+ -+ trace((stderr,"gethuffdata: start @ 0x%08lx (sector %ld.%ld)\n", -+ ftell(fp), ftell(fp)/0x800, ftell(fp) % 0x800)); -+ -+ /* -+ * correction clipping -+ */ -+ if(clip[256+255] == 0) { -+ for(i = 0; i < 256; ++i) -+ clip[i + 0] = 0x00, -+ clip[i + 256] = (byte) i, -+ clip[i + 512] = 0xff; -+ } ++ byte *pixelptr = NULL; + -+ /* -+ * should really only look for luma plane for 4base, but the -+ * there are zeroes in the rest of the sector that give both -+ * chroma tables 0 length -+ */ -+ for(i = 0; i < 3; ++i) -+ hufftable[i] = NULL; -+ for(i = 0; i < 3; ++i) { -+ if((hufftable[i] = gethufftable()) == NULL) { -+ result = 0; -+ break; -+ } -+ } -+ if(result == 0) -+ goto oops; -+ -+ /* -+ * skip remainder of current sector -+ */ -+ i = (ftell(fp) | 0x7ff) + 1; -+ if(fseek(fp, i, SEEK_SET) < 0) { -+ fprintf(stderr, "gethuffdata: sector skip failed\n"); -+ return 0; -+ } ++ trace((stderr,"gethuffdata: start @ 0x%08lx (sector %ld.%ld)\n", ++ ftell(fp), ftell(fp)/0x800, ftell(fp) % 0x800)); + -+ /* -+ * skip remainder of "sector" -+ */ -+ i = 0; -+ while (is24() != 0xfffffe) { -+ (void)get24(); -+ if(++i == 1) -+ trace((stderr,"gethuffdata: skipping for sync ...")); -+ } -+ if(i != 0) -+ trace((stderr, " %d times\n", i)); -+ -+ while(result) { -+ if(is24() == 0xfffffe) { -+ skip24(); -+ plane = get2(); -+ row = get13(); col = 0; -+ skip1(); -+ if(row >= maxrownumber) { -+ trace((stderr, -+ "gethuffdata: stopping at row %d\n", -+ row)); -+ break; -+ } -+ switch (plane) { -+ case 0: -+ huffstart = hufftable[0]; -+ pixelptr = luma + row*realrowwidth; -+ break; ++ /* ++ * correction clipping ++ */ ++ if(clip[256+255] == 0) { ++ for(i = 0; i < 256; ++i) ++ clip[i + 0] = 0x00, ++ clip[i + 256] = (byte) i, ++ clip[i + 512] = 0xff; ++ } + -+ case 2: -+ huffstart = hufftable[1]; -+ pixelptr = chroma1 + row/2*realrowwidth/2; -+ break; ++ /* ++ * should really only look for luma plane for 4base, but the ++ * there are zeroes in the rest of the sector that give both ++ * chroma tables 0 length ++ */ ++ for(i = 0; i < 3; ++i) ++ hufftable[i] = NULL; ++ for(i = 0; i < 3; ++i) { ++ if((hufftable[i] = gethufftable()) == NULL) { ++ result = 0; ++ break; ++ } ++ } ++ if(result == 0) ++ goto oops; + -+ case 3: -+ huffstart = hufftable[2]; -+ pixelptr = chroma2 + row/2*realrowwidth/2; -+ break; ++ /* ++ * skip remainder of current sector ++ */ ++ i = (ftell(fp) | 0x7ff) + 1; ++ if(fseek(fp, i, SEEK_SET) < 0) { ++ fprintf(stderr, "gethuffdata: sector skip failed\n"); ++ return 0; ++ } + -+ default: -+ fprintf(stderr, "gethuffdata: bad plane %d\n", -+ plane); -+ result = 0; -+ break; -+ } -+ WaitCursor(); -+ continue; -+ } ++ /* ++ * skip remainder of "sector" ++ */ ++ i = 0; ++ while (is24() != 0xfffffe) { ++ (void)get24(); ++ if(++i == 1) ++ trace((stderr,"gethuffdata: skipping for sync ...")); ++ } ++ if(i != 0) ++ trace((stderr, " %d times\n", i)); ++ ++ while(result) { ++ if(is24() == 0xfffffe) { ++ skip24(); ++ plane = get2(); ++ row = get13(); col = 0; ++ skip1(); ++ if(row >= maxrownumber) { ++ trace((stderr, ++ "gethuffdata: stopping at row %d\n", ++ row)); ++ break; ++ } ++ switch (plane) { ++ case 0: ++ huffstart = hufftable[0]; ++ pixelptr = luma + row*realrowwidth; ++ break; + -+ /* -+ * locate correction in huffman tree -+ */ -+ for(huffptr = huffstart;;) { -+ huffptr += get1(); -+ if(*huffptr < 0) { -+ huffptr -= *huffptr; -+ } else if(*huffptr == 0) { -+ fprintf(stderr, -+ "gethuffdata: invalid code: " -+ "image quality reduced\n"); -+ result = 0; -+ break; -+ } else -+ break; -+ } -+ if(!result) -+ break; ++ case 2: ++ huffstart = hufftable[1]; ++ pixelptr = chroma1 + row/2*realrowwidth/2; ++ break; ++ ++ case 3: ++ huffstart = hufftable[2]; ++ pixelptr = chroma2 + row/2*realrowwidth/2; ++ break; ++ ++ default: ++ fprintf(stderr, "gethuffdata: bad plane %d\n", ++ plane); ++ result = 0; ++ break; ++ } ++ WaitCursor(); ++ continue; ++ } ++ ++ /* ++ * locate correction in huffman tree ++ */ ++ for(huffptr = huffstart;;) { ++ huffptr += get1(); ++ if(*huffptr < 0) { ++ huffptr -= *huffptr; ++ } else if(*huffptr == 0) { ++ fprintf(stderr, ++ "gethuffdata: invalid code: " ++ "image quality reduced\n"); ++ result = 0; ++ break; ++ } else ++ break; ++ } ++ if(!result) ++ break; + -+ /* -+ * apply correction to the pixel -+ * -+ * eeeek!! the corrections can sometimes over or underflow! -+ * this strongly suggested that the 'magnify' method was in -+ * some way wrong. however, experiments showed that the -+ * over/under flows even occured for the pixels that are -+ * copied through magnify without change (ie, the even -+ * row/even column case). curiously, though, the odd -+ * column and odd row cases were about 3x more likely to have -+ * the over/underflow, and the odd row/odd column case was -+ * about 5x higher, so maybe the use of a bi-linear -+ * interpolation is not correct -- just *close*? -+ * -+ * the other clue in this area is that the overflows are -+ * by far most frequenct along edges of very bright -+ * areas -- rarely in the interior of such regions. -+ */ -+ i = (int) *pixelptr + (signed char) (*huffptr - 1); ++ /* ++ * apply correction to the pixel ++ * ++ * eeeek!! the corrections can sometimes over or underflow! ++ * this strongly suggested that the 'magnify' method was in ++ * some way wrong. however, experiments showed that the ++ * over/under flows even occured for the pixels that are ++ * copied through magnify without change (ie, the even ++ * row/even column case). curiously, though, the odd ++ * column and odd row cases were about 3x more likely to have ++ * the over/underflow, and the odd row/odd column case was ++ * about 5x higher, so maybe the use of a bi-linear ++ * interpolation is not correct -- just *close*? ++ * ++ * the other clue in this area is that the overflows are ++ * by far most frequenct along edges of very bright ++ * areas -- rarely in the interior of such regions. ++ */ ++ i = (int) *pixelptr + (signed char) (*huffptr - 1); +#if TRACE -+ if(i > 255) -+ ++oflow; -+/* trace((stderr, -+ "gethuffdata: oflow %d %d %d\n", row, col, i));*/ -+ else if(i < 0) -+ ++uflow; -+/* trace((stderr, -+ "gethuffdata: uflow %d %d %d\n", row, col, i));*/ -+ ++col; -+#endif -+ *pixelptr++ = clip[i + 256]; -+ } ++ if(i > 255) ++ ++oflow; ++/* trace((stderr, ++ "gethuffdata: oflow %d %d %d\n", row, col, i));*/ ++ else if(i < 0) ++ ++uflow; ++/* trace((stderr, ++ "gethuffdata: uflow %d %d %d\n", row, col, i));*/ ++ ++col; ++#endif ++ *pixelptr++ = clip[i + 256]; ++ } + +oops: -+ for(i = 0; i < 3; ++i) -+ free(hufftable[i]); -+ trace((stderr, "gethuffdata: uflow=%d oflow=%d\n", uflow, oflow)); -+ trace((stderr, "gethuffdata: done @ 0x%08lx (sector %ld.%d)\n", -+ ftell(fp), ftell(fp)/0x800, 0x800 - bytesleft)); -+ return result; ++ for(i = 0; i < 3; ++i) ++ free(hufftable[i]); ++ trace((stderr, "gethuffdata: uflow=%d oflow=%d\n", uflow, oflow)); ++ trace((stderr, "gethuffdata: done @ 0x%08lx (sector %ld.%d)\n", ++ ftell(fp), ftell(fp)/0x800, 0x800 - bytesleft)); ++ return result; +} + +#endif /* HAVE_PCD */ -diff -ruN xv-3.10a-bugfixes/xvpds.c xv-3.10a-enhancements/xvpds.c ---- xv-3.10a-bugfixes/xvpds.c 2005-04-03 11:31:30.000000000 -0700 -+++ xv-3.10a-enhancements/xvpds.c 2005-04-17 21:40:40.000000000 -0700 -@@ -77,8 +77,7 @@ - * Huffman-encoded, and the encoding histogram follows the ASCII headers. - * To decode these, we use a slightly modified version of "vdcomp.c" from the - * NASA Viking CD-ROMS. For xv to work, you need to have vdcomp compiled -- * and in your search path. vdcomp.c should be included with this --distribution. -+ * and in your search path. vdcomp.c should be included with this distribution. - * - * I've heard that newer discs have FITS images on them. If they do, support - * for them will be added when I get one. Until then, you can use fitstopgm. -@@ -102,7 +101,7 @@ - * This software is provided "as is" without any express or implied warranty. - */ - -- -+#define NEEDSDIR /* for S_IRUSR|S_IWUSR */ - #include "xv.h" - - #ifdef HAVE_PDS -@@ -129,27 +128,32 @@ - - /* This is arbitrary. Everything I've seen so far fits in 50 chars */ - #define COMMENTSIZE 50 -+#define INOTESIZE 1000 - - - static int lastwasinote = FALSE; --static char scanbuff [MAX_SIZE], -- rtbuff [RTBUFFSIZE], -- inote [20*COMMENTSIZE], -- infobuff [COMMENTSIZE], -- spacecraft [COMMENTSIZE], -- target [COMMENTSIZE], -- filtname [COMMENTSIZE], -- gainmode [COMMENTSIZE], -- editmode [COMMENTSIZE], -- scanmode [COMMENTSIZE], -- exposure [COMMENTSIZE], -- shuttermode [COMMENTSIZE], -- mphase [COMMENTSIZE], -- iname [COMMENTSIZE], -- itime [COMMENTSIZE], -- garbage [1020], -+static char scanbuff [MAX_SIZE+1], -+ rtbuff [RTBUFFSIZE+1], -+ inote [INOTESIZE+1], -+ infobuff [COMMENTSIZE+1], -+ spacecraft [COMMENTSIZE+1], -+ target [COMMENTSIZE+1], -+ filtname [COMMENTSIZE+1], -+ gainmode [COMMENTSIZE+1], -+ editmode [COMMENTSIZE+1], -+ scanmode [COMMENTSIZE+1], -+ exposure [COMMENTSIZE+1], -+ shuttermode [COMMENTSIZE+1], -+ mphase [COMMENTSIZE+1], -+ iname [COMMENTSIZE+1], -+ itime [COMMENTSIZE+1], -+ garbage [1024], - *tmptmp, - pdsuncompfname[FNAMESIZE]; -+ -+#define SSTR(l) "%" #l "s" -+#define S(l) SSTR(l) -+ - byte *image; - static int elaphe; - -@@ -251,6 +255,9 @@ - /* returns '1' on success, '0' on failure */ - - int tempnum, bytewidth, bufsize; -+#ifndef USE_MKSTEMP -+ int tmpfd; -+#endif - FILE *zf; - static int isfixed,teco,i,j,itype,vaxbyte, - recsize,hrecsize,irecsize,isimage,labelrecs,labelsofar, -@@ -397,7 +404,7 @@ - - if (strcmp(scanbuff,"END") == 0) { - break; -- } else if (sscanf(scanbuff," RECORD_TYPE = %s",rtbuff) == 1) { -+ } else if (sscanf(scanbuff, " RECORD_TYPE = " S(RTBUFFSIZE), rtbuff) == 1) { - if (strncmp(rtbuff,"VARIABLE_LENGTH", (size_t) 15) == 0) { - /* itype=PDSVARIABLE; */ - } else if (strncmp(rtbuff,"FIXED_LENGTH", (size_t) 12) == 0) { -@@ -416,7 +423,7 @@ - if (irecsize == 0) irecsize=recsize; - lastwasinote=FALSE; - continue; -- } else if (sscanf(scanbuff," FILE_TYPE = %s", rtbuff) != 0) { -+ } else if (sscanf(scanbuff, " FILE_TYPE = " S(RTBUFFSIZE), rtbuff) != 0) { - lastwasinote=FALSE; - if (strncmp(rtbuff,"IMAGE", (size_t) 5) == 0) { - isimage=TRUE; -@@ -445,74 +452,74 @@ - lastwasinote=FALSE; continue; - } else if (sscanf(scanbuff," SAMPLE_BITS = %d", &samplesize) == 1) { - lastwasinote=FALSE; continue; -- } else if (sscanf(scanbuff," SAMPLE_TYPE = %s", sampletype) == 1) { -+ } else if (sscanf(scanbuff, " SAMPLE_TYPE = " S(64), sampletype) == 1) { - lastwasinote=FALSE; continue; -- } else if (sscanf(scanbuff," SPACECRAFT_NAME = %s %s", -+ } else if (sscanf(scanbuff," SPACECRAFT_NAME = " S(COMMENTSIZE) " " S(1023), - spacecraft,garbage) == 2 ) { -- strcat(spacecraft,xv_strstr(scanbuff, spacecraft)+strlen(spacecraft)); -+ const char *tmp = xv_strstr(scanbuff, spacecraft) + strlen(spacecraft); -+ strncat(spacecraft, tmp, COMMENTSIZE - strlen(spacecraft)); - lastwasinote=FALSE; continue; -- } else if (sscanf(scanbuff," SPACECRAFT_NAME = %s", spacecraft) == 1) { -+ } else if (sscanf(scanbuff, " SPACECRAFT_NAME = " S(COMMENTSIZE), spacecraft) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," TARGET_NAME = %s", target) == 1) { -+ } else if (sscanf(scanbuff, " TARGET_NAME = " S(COMMENTSIZE), target) == 1) { - lastwasinote=FALSE; continue; -- } else if (sscanf(scanbuff," TARGET_BODY = %s", target) == 1) { -+ } else if (sscanf(scanbuff, " TARGET_BODY = " S(COMMENTSIZE), target) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," MISSION_PHASE_NAME = %s", mphase) == 1) { -+ } else if (sscanf(scanbuff, " MISSION_PHASE_NAME = " S(COMMENTSIZE), mphase) == 1) { - lastwasinote=FALSE; continue; -- } else if (sscanf(scanbuff," MISSION_PHASE = %s", mphase) == 1) { -+ } else if (sscanf(scanbuff, " MISSION_PHASE = " S(COMMENTSIZE), mphase) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," INSTRUMENT_NAME = %s", iname) == 1) { -+ } else if (sscanf(scanbuff, " INSTRUMENT_NAME = " S(COMMENTSIZE), iname) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," GAIN_MODE_ID = %s", gainmode) == 1) { -+ } else if (sscanf(scanbuff, " GAIN_MODE_ID = " S(COMMENTSIZE), gainmode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," INSTRUMENT_GAIN_STATE = %s",gainmode)==1) { -+ } else if (sscanf(scanbuff, " INSTRUMENT_GAIN_STATE = " S(COMMENTSIZE), gainmode) ==1 ) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," EDIT_MODE_ID = %s", editmode) == 1) { -+ } else if (sscanf(scanbuff, " EDIT_MODE_ID = " S(COMMENTSIZE), editmode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," INSTRUMENT_EDIT_MODE = %s", editmode)==1) { -+ } else if (sscanf(scanbuff, " INSTRUMENT_EDIT_MODE = " S(COMMENTSIZE), editmode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," SCAN_MODE_ID = %s", scanmode) == 1) { -+ } else if (sscanf(scanbuff, " SCAN_MODE_ID = " S(COMMENTSIZE), scanmode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," INSTRUMENT_SCAN_RATE = %s", scanmode)==1) { -+ } else if (sscanf(scanbuff, " INSTRUMENT_SCAN_RATE = " S(COMMENTSIZE), scanmode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," SHUTTER_MODE_ID = %s", shuttermode) == 1) { -+ } else if (sscanf(scanbuff, " SHUTTER_MODE_ID = " S(COMMENTSIZE), shuttermode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," INSTRUMENT_SHUTTER_MODE = %s", -- shuttermode) == 1) { -+ } else if (sscanf(scanbuff, " INSTRUMENT_SHUTTER_MODE = " S(COMMENTSIZE), shuttermode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," SCAN_MODE_ID = %s", scanmode) == 1) { -+ } else if (sscanf(scanbuff, " SCAN_MODE_ID = " S(COMMENTSIZE), scanmode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," INSTRUMENT_SCAN_RATE = %s", scanmode)==1) { -+ } else if (sscanf(scanbuff, " INSTRUMENT_SCAN_RATE = " S(COMMENTSIZE), scanmode) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," SPACECRAFT_EVENT_TIME = %s", itime) == 1) { -+ } else if (sscanf(scanbuff, " SPACECRAFT_EVENT_TIME = " S(COMMENTSIZE), itime) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," IMAGE_TIME = %s", itime) == 1) { -+ } else if (sscanf(scanbuff, " IMAGE_TIME = " S(COMMENTSIZE), itime) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," FILTER_NAME = %s", filtname) == 1) { -+ } else if (sscanf(scanbuff, " FILTER_NAME = " S(COMMENTSIZE), filtname) == 1) { - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff," INSTRUMENT_FILTER_NAME = %s",filtname)==1) { -+ } else if (sscanf(scanbuff, " INSTRUMENT_FILTER_NAME = " S(COMMENTSIZE), filtname) == 1) { - lastwasinote=FALSE; continue; - -- } else if ((sscanf(scanbuff," EXPOSURE_DURATION = %s", exposure) == 1) -- || (sscanf(scanbuff," INSTRUMENT_EXPOSURE_DURATION = %s", -- exposure) == 1)) { -+ } else if ((sscanf(scanbuff, " EXPOSURE_DURATION = " S(COMMENTSIZE), exposure) == 1) -+ || (sscanf(scanbuff, " INSTRUMENT_EXPOSURE_DURATION = " S(COMMENTSIZE), -+ exposure)) == 1) { - tmptmp = (char *) index(scanbuff,'='); - tmptmp++; - while((*tmptmp) == ' ') -@@ -520,10 +527,10 @@ - strcpy(exposure,tmptmp); - lastwasinote=FALSE; continue; - -- } else if (sscanf(scanbuff, "NOTE = %s", inote) == 1) { -+ } else if (sscanf(scanbuff, "NOTE = " S(INOTESIZE), inote) == 1) { - tmptmp = (char *) index(scanbuff,'='); tmptmp++; - while (((*tmptmp) == ' ') || ((*tmptmp) == '"')) tmptmp++; -- strcpy(inote,tmptmp); -+ strncpy(inote, tmptmp, INOTESIZE - 1); - strcat(inote," "); - - /* evil and somewhat risky: A "note" (really, any textual -@@ -548,7 +555,7 @@ - } else if (lastwasinote) { - tmptmp=scanbuff; - while (((*tmptmp) == ' ') || ((*tmptmp) == '"')) tmptmp++; -- strcat(inote,tmptmp); -+ strncat(inote, tmptmp, INOTESIZE - strlen(inote) - 1); - strcat(inote," "); - if (index(tmptmp,'"') != NULL) - lastwasinote=FALSE; -@@ -647,27 +654,27 @@ - - *infobuff='\0'; - if (*spacecraft) { -- strcat(infobuff,spacecraft); -+ strncat(infobuff, spacecraft, sizeof(infobuff) - 1); - } - - if (*target) { -- strcat(infobuff,", "); -- strcat(infobuff,target); -+ strncat(infobuff, ", ", sizeof(infobuff) - strlen(infobuff) - 1); -+ strncat(infobuff, target, sizeof(infobuff) - strlen(infobuff) - 1); - } - - if (*filtname) { -- strcat(infobuff,", "); -- strcat(infobuff,filtname); -+ strncat(infobuff, ", ", sizeof(infobuff) - strlen(infobuff) - 1); -+ strncat(infobuff, filtname, sizeof(infobuff) - strlen(infobuff) - 1); - } - - if (*itime) { -- strcat(infobuff,", "); -- strcat(infobuff,itime); -+ strncat(infobuff, ", ", sizeof(infobuff) - strlen(infobuff) - 1); -+ strncat(infobuff, itime, sizeof(infobuff) - strlen(infobuff) - 1); - } - -- SetISTR(ISTR_WARNING,infobuff); -+ SetISTR(ISTR_WARNING, "%s", infobuff); - -- strcpy(pdsuncompfname,fname); -+ strncpy(pdsuncompfname,fname,sizeof(pdsuncompfname) - 1); - ftypstr = ""; - - switch (itype) { -@@ -695,7 +702,7 @@ - fclose(zf); - - #ifndef VMS -- sprintf(pdsuncompfname,"%s/xvhuffXXXXXX", tmpdir); -+ snprintf(pdsuncompfname, sizeof(pdsuncompfname) - 1, "%s/xvhuffXXXXXX", tmpdir); - #else - strcpy(pdsuncompfname,"sys$disk:[]xvhuffXXXXXX"); - #endif -@@ -704,10 +711,16 @@ - close(mkstemp(pdsuncompfname)); - #else - mktemp(pdsuncompfname); -+ tmpfd = open(pdsuncompfname,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); -+ if (tmpfd < 0) { -+ SetISTR(ISTR_WARNING,"Unable to create temporary file."); -+ return 0; -+ } -+ close(tmpfd); - #endif - - #ifndef VMS -- sprintf(scanbuff,"%s %s - 4 >%s",PDSUNCOMP,fname,pdsuncompfname); -+ sprintf(scanbuff,"%s '%s' - 4 > %s", PDSUNCOMP, fname, pdsuncompfname); - #else - sprintf(scanbuff,"%s %s %s 4",PDSUNCOMP,fname,pdsuncompfname); - #endif -@@ -823,26 +836,26 @@ - char tmp[256]; - *(pinfo->comment) = '\0'; - -- sprintf(tmp, "Spacecraft: %-28sTarget: %-32s\n", spacecraft, target); -- strcat(pinfo->comment, tmp); -+ sprintf(tmp, "Spacecraft: %-28.28sTarget: %-32.32s\n", spacecraft, target); -+ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); - -- sprintf(tmp, "Filter: %-32sMission phase: %-24s\n", filtname, mphase); -- strcat(pinfo->comment, tmp); -+ sprintf(tmp, "Filter: %-32.32sMission phase: %-24.24s\n", filtname, mphase); -+ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); - -- sprintf(tmp, "Image time: %-28sGain mode: %-29s\n", itime, gainmode); -- strcat(pinfo->comment, tmp); -+ sprintf(tmp, "Image time: %-28.28sGain mode: %-29.29s\n", itime, gainmode); -+ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); - -- sprintf(tmp, "Edit mode: %-29sScan mode: %-29s\n", editmode, scanmode); -- strcat(pinfo->comment, tmp); -+ sprintf(tmp, "Edit mode: %-29.29sScan mode: %-29.29s\n", editmode, scanmode); -+ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); - -- sprintf(tmp, "Exposure: %-30sShutter mode: %-25s\n", exposure,shuttermode); -- strcat(pinfo->comment, tmp); -+ sprintf(tmp, "Exposure: %-30.30sShutter mode: %-25.25s\n", exposure,shuttermode); -+ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); - -- sprintf(tmp, "Instrument: %-28sImage time: %-28s\n", iname, itime); -- strcat(pinfo->comment, tmp); -+ sprintf(tmp, "Instrument: %-28.28sImage time: %-28.28s\n", iname, itime); -+ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); - -- sprintf(tmp, "Image Note: %-28s", inote); -- strcat(pinfo->comment, tmp); -+ sprintf(tmp, "Image Note: %-28.28s", inote); -+ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); - } - - if (LoadPDSPalette(fname, pinfo)) return 1; -diff -ruN xv-3.10a-bugfixes/xvpi.c xv-3.10a-enhancements/xvpi.c ---- xv-3.10a-bugfixes/xvpi.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvpi.c 2005-04-17 22:57:04.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvpi.c xv-3.10a/xvpi.c +--- xv-3.10a.orig/xvpi.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvpi.c 2005-04-18 00:57:04.000000000 -0500 @@ -0,0 +1,1060 @@ +/* + * xvpi.c - load routine for `Pi' format pictures. @@ -18115,9 +10856,9 @@ diff -ruN xv-3.10a-bugfixes/xvpi.c xv-3.10a-enhancements/xvpi.c + return r; +} +#endif /* HAVE_PI */ -diff -ruN xv-3.10a-bugfixes/xvpic.c xv-3.10a-enhancements/xvpic.c ---- xv-3.10a-bugfixes/xvpic.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvpic.c 2005-04-17 22:57:08.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvpic.c xv-3.10a/xvpic.c +--- xv-3.10a.orig/xvpic.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvpic.c 2005-04-18 00:57:08.000000000 -0500 @@ -0,0 +1,1285 @@ +/* + * xvpic.c - load routine for `PIC' format pictures. @@ -19404,9 +12145,9 @@ diff -ruN xv-3.10a-bugfixes/xvpic.c xv-3.10a-enhancements/xvpic.c + return r; +} +#endif /* HAVE_PIC */ -diff -ruN xv-3.10a-bugfixes/xvpic2.c xv-3.10a-enhancements/xvpic2.c ---- xv-3.10a-bugfixes/xvpic2.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvpic2.c 2005-04-17 22:56:07.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvpic2.c xv-3.10a/xvpic2.c +--- xv-3.10a.orig/xvpic2.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvpic2.c 2007-04-15 17:02:32.000000000 -0500 @@ -0,0 +1,3608 @@ +/* + * $Id: xvpic2.c,v 2.9.1.14 1995/04/24 15:34:15 ikeyan Exp $ @@ -22926,11 +15667,11 @@ diff -ruN xv-3.10a-bugfixes/xvpic2.c xv-3.10a-enhancements/xvpic2.c +{ + switch (cmd) { + case T_BOK: { -+ char *fullname; -+ char buf[64], *x_offsetp, *y_offsetp; -+ static char *labels[] = { "\nOk", "\033Cancel" }; -+ XEvent event; -+ int i; ++ char *fullname; ++ char buf[64], *x_offsetp, *y_offsetp; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ XEvent event; ++ int i; + + strcpy(buf, "0,0"); + i = GetStrPopUp("Enter offset (x,y):", labels, 2, buf, 64, @@ -23016,10 +15757,10 @@ diff -ruN xv-3.10a-bugfixes/xvpic2.c xv-3.10a-enhancements/xvpic2.c + free(inpix); +} +#endif /* HAVE_PIC2 */ -diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c ---- xv-3.10a-bugfixes/xvpng.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvpng.c 2005-04-17 15:00:08.000000000 -0700 -@@ -0,0 +1,1081 @@ +diff -u -r --new-file xv-3.10a.orig/xvpng.c xv-3.10a/xvpng.c +--- xv-3.10a.orig/xvpng.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvpng.c 2007-05-13 19:53:28.000000000 -0500 +@@ -0,0 +1,1173 @@ +/* + * xvpng.c - load and write routines for 'PNG' format pictures + * @@ -23034,16 +15775,19 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + */ + +/*#include "copyright.h"*/ ++ +/* (c) 1995 by Alexander Lehmann <lehmann@mathematik.th-darmstadt.de> + * This file is a suplement to xv and is supplied under the same copying + * conditions (except the shareware part). ++ * The copyright will be passed on to JB at some future point if he ++ * so desires. ++ * + * Modified by Andreas Dilger <adilger@enel.ucalgary.ca> to fix + * error handling for bad PNGs, add dialogs for interlacing and + * compression selection, and upgrade to libpng-0.89. ++ * + * Modified by Greg Roelofs, TenThumbs and others to fix bugs and add -+ * features. -+ * The copyright will be passed on to JB at some future point if he -+ * so desires. ++ * features. See README.jumbo for details. + */ + +#include "xv.h" @@ -23060,13 +15804,13 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c +#define COMPRESSION 6 /* default zlib compression level, not max + (Z_BEST_COMPRESSION) */ + -+#define HAVE_tRNS (info_ptr->valid & PNG_INFO_tRNS) ++#define HAVE_tRNS (info_ptr->valid & PNG_INFO_tRNS) + -+#define DWIDE 86 ++#define DWIDE 86 +#define DHIGH 104 -+#define PFX PWIDE-93 -+#define PFY 44 -+#define PFH 20 ++#define PFX (PWIDE-93) ++#define PFY 44 ++#define PFH 20 + +#define P_BOK 0 +#define P_BCANC 1 @@ -23092,7 +15836,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + +/*** local variables ***/ +static char *filename; -+static char *fbasename; ++static const char *fbasename; +static int colorType; +static int read_anything; +static double Display_Gamma = DISPLAY_GAMMA; @@ -23102,6 +15846,35 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c +static CBUTT interCB; +static CBUTT FdefCB, FnoneCB, FsubCB, FupCB, FavgCB, FPaethCB; + ++ ++#ifdef PNG_NO_STDIO ++/* NOTE: Some sites configure their version of the PNG Library without ++ * Standard I/O Library interfaces in order to avoid unnecessary inter- ++ * library dependencies at link time for applications that don't need Standard ++ * I/O. If your site is one of these, the following skeletal stubs, copied ++ * from libpng code, should be enough for this module. --Scott B. Marovich, ++ * Hewlett-Packard Laboratories, March 2001. ++ */ ++static void ++png_default_read_data(png_structp png_ptr, png_bytep data, png_size_t length) ++{ ++ ++ /* fread() returns 0 on error, so it is OK to store this in a png_size_t ++ * instead of an int, which is what fread() actually returns. ++ */ ++ if (fread(data,1,length,(FILE *)png_ptr->io_ptr) != length) ++ png_error(png_ptr, "Read Error"); ++} ++ ++static void ++png_default_write_data(png_structp png_ptr, png_bytep data, png_size_t length) ++{ ++ if (fwrite(data, 1, length, (FILE *)png_ptr->io_ptr) != length) ++ png_error(png_ptr, "Write Error"); ++} ++#endif /* PNG_NO_STDIO */ ++ ++ +/**************************************************************************/ +/* PNG SAVE DIALOG ROUTINES ***********************************************/ +/**************************************************************************/ @@ -23258,14 +16031,14 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c +static void drawPD(x, y, w, h) + int x, y, w, h; +{ -+ char *title = "Save PNG file..."; ++ const char *title = "Save PNG file..."; + + char ctitle1[20]; -+ char *ctitle2 = "Useful range"; -+ char *ctitle3 = "is 2 - 7."; -+ char *ctitle4 = "Uncompressed = 0"; ++ const char *ctitle2 = "Useful range"; ++ const char *ctitle3 = "is 2 - 7."; ++ const char *ctitle4 = "Uncompressed = 0"; + -+ char *ftitle = "Row Filters:"; ++ const char *ftitle = "Row Filters:"; + + char gtitle[20]; + @@ -23421,21 +16194,23 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + int ptype, w, h; + byte *rmap, *gmap, *bmap; + int numcols; ++ /* FIXME? what's diff between picComments and WriteGIF's comment arg? */ +{ + png_struct *png_ptr; + png_info *info_ptr; + png_color palette[256]; + png_textp text; -+ byte remap[256]; -+ int i, filter, linesize, pass; ++ byte r1[256], g1[256], b1[256]; /* storage for deduped palette */ ++ byte pc2nc[256]; /* for duplicated-color remapping (1st level) */ ++ byte remap[256]; /* for bw/grayscale remapping (2nd level) */ ++ int i, j, numuniqcols=0, filter, linesize, pass; + byte *p, *png_line; + char software[256]; + char *savecmnt; + + if ((png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, + png_xv_error, png_xv_warning)) == NULL) { -+ sprintf(software, "png_create_write_struct() failure in WritePNG (ver. %s)", -+ PNG_LIBPNG_VER_STRING); ++ sprintf(software, "png_create_write_struct() failure in WritePNG"); + FatalError(software); + } + @@ -23451,7 +16226,12 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + return -1; + } + ++#ifdef PNG_NO_STDIO ++ png_set_write_fn(png_ptr, fp, png_default_write_data, NULL); ++ png_set_error_fn(png_ptr, NULL, png_xv_error, png_xv_warning); ++#else + png_init_io(png_ptr, fp); ++#endif + + png_set_compression_level(png_ptr, (int)cDial.val); + @@ -23485,8 +16265,39 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + + linesize = 0; /* quiet a compiler warning */ + ++ ++ /* GRR 20070331: remap palette to eliminate duplicated colors (as in ++ * xvgifwr.c) */ ++ if (ptype == PIC8) { ++ for (i=0; i<256; ++i) { ++ pc2nc[i] = r1[i] = g1[i] = b1[i] = 0; ++ } ++ ++ /* compute number of unique colors */ ++ numuniqcols = 0; ++ ++ for (i=0; i<numcols; ++i) { ++ /* see if color #i is already used */ ++ for (j=0; j<i; ++j) { ++ if (rmap[i] == rmap[j] && gmap[i] == gmap[j] && bmap[i] == bmap[j]) ++ break; ++ } ++ ++ if (j==i) { /* wasn't found */ ++ pc2nc[i] = numuniqcols; ++ r1[numuniqcols] = rmap[i]; /* i.e., r1[pc2nc[i]] == rmap[i] */ ++ g1[numuniqcols] = gmap[i]; ++ b1[numuniqcols] = bmap[i]; ++ ++numuniqcols; ++ } ++ else pc2nc[i] = pc2nc[j]; ++ } ++ } ++ ++ ++ /* Appendix G.2 of user manual claims colorType will never be F_REDUCED... */ + if (colorType == F_FULLCOLOR || colorType == F_REDUCED) { -+ if(ptype == PIC24) { ++ if (ptype == PIC24) { + linesize = 3*w; + if (linesize/3 < w) { + SetISTR(ISTR_WARNING, "%s: image dimensions too large (%dx%d)", @@ -23496,39 +16307,39 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + } + info_ptr->color_type = PNG_COLOR_TYPE_RGB; + info_ptr->bit_depth = 8; -+ } else { ++ } else /* ptype == PIC8 */ { + linesize = w; + info_ptr->color_type = PNG_COLOR_TYPE_PALETTE; -+ if(numcols <= 2) ++ if (numuniqcols <= 2) + info_ptr->bit_depth = 1; + else -+ if(numcols <= 4) ++ if (numuniqcols <= 4) + info_ptr->bit_depth = 2; + else -+ if(numcols <= 16) ++ if (numuniqcols <= 16) + info_ptr->bit_depth = 4; + else + info_ptr->bit_depth = 8; + -+ for(i = 0; i < numcols; i++) { -+ palette[i].red = rmap[i]; -+ palette[i].green = gmap[i]; -+ palette[i].blue = bmap[i]; ++ for (i = 0; i < numuniqcols; i++) { ++ palette[i].red = r1[i]; ++ palette[i].green = g1[i]; ++ palette[i].blue = b1[i]; + } -+ info_ptr->num_palette = numcols; ++ info_ptr->num_palette = numuniqcols; + info_ptr->palette = palette; + info_ptr->valid |= PNG_INFO_PLTE; + } + } + -+ else if(colorType == F_GREYSCALE || colorType == F_BWDITHER) { ++ else if (colorType == F_GREYSCALE || colorType == F_BWDITHER) { + info_ptr->color_type = PNG_COLOR_TYPE_GRAY; -+ if(colorType == F_BWDITHER) { ++ if (colorType == F_BWDITHER) { + /* shouldn't happen */ + if (ptype == PIC24) FatalError("PIC24 and B/W Stipple in WritePNG()"); + + info_ptr->bit_depth = 1; -+ if(MONO(rmap[0], gmap[0], bmap[0]) > MONO(rmap[1], gmap[1], bmap[1])) { ++ if (MONO(r1[0], g1[0], b1[0]) > MONO(r1[1], g1[1], b1[1])) { + remap[0] = 1; + remap[1] = 0; + } @@ -23538,8 +16349,8 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + } + linesize = w; + } -+ else { -+ if(ptype == PIC24) { ++ else /* F_GREYSCALE */ { ++ if (ptype == PIC24) { + linesize = 3*w; + if (linesize/3 < w) { + SetISTR(ISTR_WARNING, "%s: image dimensions too large (%dx%d)", @@ -23549,65 +16360,75 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + } + info_ptr->bit_depth = 8; + } -+ else { ++ else /* ptype == PIC8 */ { + int low_precision; + + linesize = w; + -+ for(i = 0; i < numcols; i++) -+ remap[i] = MONO(rmap[i], gmap[i], bmap[i]); -+ -+ for(; i < 256; i++) -+ remap[i]=0; ++ /* NOTE: currently remap[] is the _secondary_ remapping of "palette" ++ * colors; its values are the final color/grayscale values, and, ++ * like r1/g1/b1[], it is _indexed_ by pc2nc[] (which is why its ++ * values come from r1/g1/b1[] and not from rmap/gmap/bmap[]). ++ * ++ * FIXME (probably): MONO() will create new duplicates; ideally should ++ * do extra round of dup-detection (and preferably collapse all ++ * remapping levels into single LUT). This stuff is a tad confusing. ++ */ ++ for (i = 0; i < numuniqcols; i++) ++ remap[i] = MONO(r1[i], g1[i], b1[i]); ++ ++ for (; i < 256; i++) ++ remap[i]=0; /* shouldn't be necessary, but... */ + + info_ptr->bit_depth = 8; + + /* Note that this fails most of the time because of gamma */ ++ /* (and that would be a bug: GRR FIXME) */ + /* try to adjust to 4-bit precision grayscale */ + + low_precision=1; + -+ for(i = 0; i < numcols; i++) { -+ if((remap[i] & 0x0f) * 0x11 != remap[i]) { ++ for (i = 0; i < numuniqcols; i++) { ++ if ((remap[i] & 0x0f) * 0x11 != remap[i]) { + low_precision = 0; + break; + } + } + -+ if(low_precision) { -+ for(i = 0; i < numcols; i++) { ++ if (low_precision) { ++ for (i = 0; i < numuniqcols; i++) { + remap[i] &= 0xf; + } + info_ptr->bit_depth = 4; + + /* try to adjust to 2-bit precision grayscale */ + -+ for(i = 0; i < numcols; i++) { -+ if((remap[i] & 0x03) * 0x05 != remap[i]) { ++ for (i = 0; i < numuniqcols; i++) { ++ if ((remap[i] & 0x03) * 0x05 != remap[i]) { + low_precision = 0; + break; + } + } + } + -+ if(low_precision) { -+ for(i = 0; i < numcols; i++) { ++ if (low_precision) { ++ for (i = 0; i < numuniqcols; i++) { + remap[i] &= 3; + } + info_ptr->bit_depth = 2; + + /* try to adjust to 1-bit precision grayscale */ + -+ for(i = 0; i < numcols; i++) { -+ if((remap[i] & 0x01) * 0x03 != remap[i]) { ++ for (i = 0; i < numuniqcols; i++) { ++ if ((remap[i] & 0x01) * 0x03 != remap[i]) { + low_precision = 0; + break; + } + } + } + -+ if(low_precision) { -+ for(i = 0; i < numcols; i++) { ++ if (low_precision) { ++ for (i = 0; i < numuniqcols; i++) { + remap[i] &= 1; + } + info_ptr->bit_depth = 1; @@ -23634,32 +16455,40 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + + Display_Gamma = gDial.val; /* Save the current gamma for loading */ + ++// GRR FIXME: add .Xdefaults option to omit writing gamma (size, cumulative errors when editing)--alternatively, modify save box to include "omit" checkbox + info_ptr->gamma = 1.0/gDial.val; + info_ptr->valid |= PNG_INFO_gAMA; + + png_write_info(png_ptr, info_ptr); + -+ if(info_ptr->bit_depth < 8) ++ if (info_ptr->bit_depth < 8) + png_set_packing(png_ptr); + + pass=png_set_interlace_handling(png_ptr); + -+ if((png_line = malloc(linesize)) == NULL) ++ if ((png_line = malloc(linesize)) == NULL) + png_error(png_ptr, "cannot allocate temp image line"); ++ /* FIXME: should be FatalError() */ + -+ for(i = 0; i < pass; i++) { ++ for (i = 0; i < pass; ++i) { + int j; + p = pic; -+ for(j = 0; j < h; j++) { -+ if(info_ptr->color_type == PNG_COLOR_TYPE_GRAY) { ++ for (j = 0; j < h; ++j) { ++ if (info_ptr->color_type == PNG_COLOR_TYPE_GRAY) { + int k; -+ for(k = 0; k < w; k++) ++ for (k = 0; k < w; ++k) + png_line[k] = ptype==PIC24 ? MONO(p[k*3], p[k*3+1], p[k*3+2]) : -+ remap[p[k]]; ++ remap[pc2nc[p[k]]]; ++ png_write_row(png_ptr, png_line); ++ } else if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE) { ++ int k; ++ for (k = 0; k < w; ++k) ++ png_line[k] = pc2nc[p[k]]; + png_write_row(png_ptr, png_line); -+ } else /* RGB or palette */ ++ } else { /* PNG_COLOR_TYPE_RGB */ + png_write_row(png_ptr, p); -+ if((j & 0x1f) == 0) WaitCursor(); ++ } ++ if ((j & 0x1f) == 0) WaitCursor(); + p += linesize; + } + } @@ -23668,8 +16497,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + + savecmnt = NULL; /* quiet a compiler warning */ + -+ if (text) -+ { ++ if (text) { + if (picComments && strlen(picComments) && + (savecmnt = (char *)malloc((strlen(picComments) + 1)*sizeof(char)))) { + png_textp tp; @@ -23701,7 +16529,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + + /* See if it looks like a PNG keyword from LoadPNG */ + /* GRR: should test for strictly < 80, right? (key = 1-79 chars only) */ -+ if(comment && comment[1] == ':' && comment - key <= 80) { ++ if (comment && comment[1] == ':' && comment - key <= 80) { + *(comment++) = '\0'; + *(comment++) = '\0'; + @@ -23709,7 +16537,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + since we have already stored one */ + if (strcmp(key, "Software") == 0 && strncmp(comment, "XV", 2) == 0) { + key = strchr(comment, '\n'); -+ if(key) ++ if (key) + key++; /* skip \n */ + comment = strchr(key, ':'); + } @@ -23726,7 +16554,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + + /* It looks like another keyword, go backward to the beginning */ + if (key) { -+ while(key > tp->text && *key != '\n') ++ while (key > tp->text && *key != '\n') + key--; + + if (key > tp->text && comment - key <= 80) { @@ -23774,8 +16602,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + } + } while (key && *key); + } -+ else -+ { ++ else { + info_ptr->num_text = 0; + } + } @@ -23787,8 +16614,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + png_write_end(png_ptr, info_ptr); + fflush(fp); /* just in case we core-dump before finishing... */ + -+ if (text) -+ { ++ if (text) { + free(text); + /* must do this or png_destroy_write_struct() 0.97+ will free text again: */ + info_ptr->text = (png_textp)NULL; @@ -23845,28 +16671,28 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + + png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, NULL, + png_xv_error, png_xv_warning); -+ if(!png_ptr) { ++ if (!png_ptr) { + fclose(fp); + FatalError("malloc failure in LoadPNG"); + } + + info_ptr = png_create_info_struct(png_ptr); + -+ if(!info_ptr) { ++ if (!info_ptr) { + fclose(fp); + png_destroy_read_struct(&png_ptr, (png_infopp)NULL, (png_infopp)NULL); + FatalError("malloc failure in LoadPNG"); + } + -+ if(setjmp(png_ptr->jmpbuf)) { ++ if (setjmp(png_ptr->jmpbuf)) { + fclose(fp); + png_destroy_read_struct(&png_ptr, &info_ptr, (png_infopp)NULL); -+ if(!read_anything) { -+ if(pinfo->pic) { ++ if (!read_anything) { ++ if (pinfo->pic) { + free(pinfo->pic); + pinfo->pic = NULL; + } -+ if(pinfo->comment) { ++ if (pinfo->comment) { + free(pinfo->comment); + pinfo->comment = NULL; + } @@ -23874,7 +16700,12 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + return read_anything; + } + ++#ifdef PNG_NO_STDIO ++ png_set_read_fn(png_ptr, fp, png_default_read_data); ++ png_set_error_fn(png_ptr, NULL, png_xv_error, png_xv_warning); ++#else + png_init_io(png_ptr, fp); ++#endif + png_read_info(png_ptr, info_ptr); + + pinfo->w = pinfo->normw = info_ptr->width; @@ -23924,8 +16755,10 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + + if (info_ptr->valid & PNG_INFO_gAMA) + png_set_gamma(png_ptr, Display_Gamma, info_ptr->gamma); -+ else -+ png_set_gamma(png_ptr, Display_Gamma, 0.45); ++/* ++ *else ++ * png_set_gamma(png_ptr, Display_Gamma, 0.45); ++ */ + + gray_to_rgb = 0; /* quiet a compiler warning */ + @@ -23934,7 +16767,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + my_background.red = imagebgR; + my_background.green = imagebgG; + my_background.blue = imagebgB; -+ my_background.gray = imagebgG; /* only used if all three equal... */ ++ my_background.gray = imagebgG; /* used only if all three equal... */ + } else { + my_background.red = (imagebgR >> 8); + my_background.green = (imagebgG >> 8); @@ -23980,7 +16813,7 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + + png_read_update_info(png_ptr, info_ptr); + -+ if(info_ptr->color_type == PNG_COLOR_TYPE_RGB || ++ if (info_ptr->color_type == PNG_COLOR_TYPE_RGB || + info_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA || gray_to_rgb) + { + linesize = 3 * pinfo->w; @@ -23995,13 +16828,13 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + } else { + linesize = pinfo->w; + pinfo->type = PIC8; -+ if(info_ptr->color_type == PNG_COLOR_TYPE_GRAY || ++ if (info_ptr->color_type == PNG_COLOR_TYPE_GRAY || + info_ptr->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) { -+ for(i = 0; i < 256; i++) ++ for (i = 0; i < 256; i++) + pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; + } else { + pinfo->colType = F_FULLCOLOR; -+ for(i = 0; i < info_ptr->num_palette; i++) { ++ for (i = 0; i < info_ptr->num_palette; i++) { + pinfo->r[i] = info_ptr->palette[i].red; + pinfo->g[i] = info_ptr->palette[i].green; + pinfo->b[i] = info_ptr->palette[i].blue; @@ -24018,37 +16851,37 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c + } + pinfo->pic = calloc((size_t)bufsize, (size_t)1); + -+ if(!pinfo->pic) { ++ if (!pinfo->pic) { + png_error(png_ptr, "can't allocate space for PNG image"); + } + + png_start_read_image(png_ptr); + -+ for(i = 0; i < pass; i++) { ++ for (i = 0; i < pass; i++) { + byte *p = pinfo->pic; -+ for(j = 0; j < pinfo->h; j++) { ++ for (j = 0; j < pinfo->h; j++) { + png_read_row(png_ptr, p, NULL); + read_anything = 1; -+ if((j & 0x1f) == 0) WaitCursor(); ++ if ((j & 0x1f) == 0) WaitCursor(); + p += linesize; + } + } + + png_read_end(png_ptr, info_ptr); + -+ if(info_ptr->num_text > 0) { ++ if (info_ptr->num_text > 0) { + commentsize = 1; + -+ for(i = 0; i < info_ptr->num_text; i++) ++ for (i = 0; i < info_ptr->num_text; i++) + commentsize += strlen(info_ptr->text[i].key) + 1 + + info_ptr->text[i].text_length + 2; + -+ if((pinfo->comment = malloc(commentsize)) == NULL) { ++ if ((pinfo->comment = malloc(commentsize)) == NULL) { + png_warning(png_ptr,"can't allocate comment string"); + } + else { + pinfo->comment[0] = '\0'; -+ for(i = 0; i < info_ptr->num_text; i++) { ++ for (i = 0; i < info_ptr->num_text; i++) { + strcat(pinfo->comment, info_ptr->text[i].key); + strcat(pinfo->comment, "::"); + strcat(pinfo->comment, info_ptr->text[i].text); @@ -24101,2240 +16934,9 @@ diff -ruN xv-3.10a-bugfixes/xvpng.c xv-3.10a-enhancements/xvpng.c +} + +#endif /* HAVE_PNG */ -diff -ruN xv-3.10a-bugfixes/xvpopup.c xv-3.10a-enhancements/xvpopup.c ---- xv-3.10a-bugfixes/xvpopup.c 2004-05-16 18:04:13.000000000 -0700 -+++ xv-3.10a-enhancements/xvpopup.c 2005-04-25 08:21:34.000000000 -0700 -@@ -23,7 +23,7 @@ - #define OMIT_ICON_BITS - #include "bits/icon" /* icon_bits[] not used, but icon_width/height are */ - --#define PUWIDE 400 -+#define PUWIDE 480 - #define PUHIGH 170 - - #define PAD_PUWIDE 480 -@@ -201,14 +201,14 @@ - - if (!padHaveDooDads) { - DCreate(&padWDial, popW, 16, puhigh-16-100-1,75,100, -- 1, 2048, pWIDE, 10, -+ 1.0, 2048.0, (double)pWIDE, 1.0, 10.0, - infofg, infobg, hicol, locol, "Width", NULL); - DCreate(&padHDial, popW, 16+1+75, puhigh-16-100-1,75,100, -- 1, 2048, pHIGH, 10, -+ 1.0, 2048.0, (double)pHIGH, 1.0, 10.0, - infofg, infobg, hicol, locol, "Height", NULL); - - DCreate(&padODial, popW, 16+1+75+75+9, puhigh-16-100-1,75,100, -- 0, 100, 100, 10, -+ 0.0, 100.0, 100.0, 1.0, 10.0, - infofg, infobg, hicol, locol, "Opaque", NULL); - - MBCreate(&padMthdMB, popW, 100-2+44, 10, 140, 19, NULL, -@@ -259,9 +259,9 @@ - else if (poptyp == ISPAD) { - BTSetActive(&bts[0], (int) strlen(gsBuf)); - i = pWIDE * 3; RANGE(i,2048,9999); -- DSetRange(&padWDial, 1, i, padWDial.val, 10); -+ DSetRange(&padWDial, 1.0, (double)i, padWDial.val, 1.0, 10.0); - i = pHIGH * 3; RANGE(i,2048,9999); -- DSetRange(&padHDial, 1, i, padHDial.val, 10); -+ DSetRange(&padHDial, 1.0, (double)i, padHDial.val, 1.0, 10.0); - - DSetActive(&padWDial, (padMode!=PAD_LOAD)); /* DSetRange activates dial */ - DSetActive(&padHDial, (padMode!=PAD_LOAD)); -@@ -287,15 +287,19 @@ - /* center first button in window around mouse position, with constraint that - window be fully on the screen */ - -- CenterMapWindow(popW, 40 + bts[0].x, BUTTH/2 + bts[0].y, puwide, puhigh); - popUp = poptyp; -+ if (startGrab == 2) -+ startGrab = 4; -+ else { -+ CenterMapWindow(popW, 40 + bts[0].x, BUTTH/2 + bts[0].y, puwide, puhigh); - -- /* MUST wait for VisibilityNotify event to come in, else we run the risk -- of UnMapping the window *before* the Map request completed. This -- appears to be bad, (It leaves an empty window frame up.) though it -- generally only happens on slow servers. Better safe than screwed... */ -+ /* MUST wait for VisibilityNotify event to come in, else we run the risk -+ of UnMapping the window *before* the Map request completed. This -+ appears to be bad, (It leaves an empty window frame up.) though it -+ generally only happens on slow servers. Better safe than screwed... */ - -- XWindowEvent(theDisp, popW, VisibilityChangeMask, &event); -+ XWindowEvent(theDisp, popW, VisibilityChangeMask, &event); -+ } - - /* block until this window gets closed */ - while (popUp) { -@@ -466,9 +470,9 @@ - changedGSBuf(); /* careful! popW doesn't exist yet! */ - - if (padHaveDooDads) { -- oldW = padWDial.val; -- oldH = padHDial.val; -- oldO = padODial.val; -+ oldW = (int)padWDial.val; -+ oldH = (int)padHDial.val; -+ oldO = (int)padODial.val; - } - else { oldW = pWIDE; oldH = pHIGH; oldO = 100; } - -@@ -487,9 +491,9 @@ - } - - if (rv == 1) { /* cancelled: restore normal values */ -- DSetVal(&padWDial, oldW); -- DSetVal(&padHDial, oldH); -- DSetVal(&padODial, oldO); -+ DSetVal(&padWDial, (double)oldW); -+ DSetVal(&padHDial, (double)oldH); -+ DSetVal(&padODial, (double)oldO); - } - - XUnmapWindow(theDisp, padWDial.win); -@@ -499,9 +503,9 @@ - /* load up return values */ - *pMode = padMode; - *pStr = padBuf; -- *pWide = padWDial.val; -- *pHigh = padHDial.val; -- *pOpaque = padODial.val; -+ *pWide = (int)padWDial.val; -+ *pHigh = (int)padHDial.val; -+ *pOpaque = (int)padODial.val; - *pOmode = padOMode; - - return rv; -@@ -956,14 +960,14 @@ - int x,y; - { - int i; -- BUTT *bp; -+ BUTT *bp = NULL; - - for (i=0; i<nbts; i++) { - bp = &bts[i]; - if (PTINRECT(x, y, bp->x, bp->y, bp->w, bp->h)) break; - } - -- if (i<nbts && BTTrack(bp)) { -+ if (i<nbts && bp && BTTrack(bp)) { - popUp = 0; selected = i; return; - } - -@@ -972,8 +976,8 @@ - else if (popUp == ISPAD) { - if (PTINRECT(x, y, padDButt.x, padDButt.y, padDButt.w, padDButt.h)) { - if (BTTrack(&padDButt)) { -- DSetVal(&padWDial, pWIDE); -- DSetVal(&padHDial, pHIGH); -+ DSetVal(&padWDial, (double)pWIDE); -+ DSetVal(&padHDial, (double)pHIGH); - } - } - -@@ -1105,7 +1109,7 @@ - } - - -- else if (c=='\010' || c=='\177') { /* BS or DEL */ -+ else if (c=='\010') { /* BS */ - if (gsCurPos==0) return 1; /* at beginning of str */ - xvbcopy(&gsBuf[gsCurPos], &gsBuf[gsCurPos-1], (size_t) len-gsCurPos+1); - gsCurPos--; -@@ -1128,7 +1132,7 @@ - gsCurPos = len; - } - -- else if (c=='\004') { /* ^D: delete character at gsCurPos */ -+ else if (c=='\004' || c=='\177') { /* ^D or DEL: delete character at gsCurPos */ - if (gsCurPos==len) return 1; - xvbcopy(&gsBuf[gsCurPos+1], &gsBuf[gsCurPos], (size_t) len-gsCurPos); - } -diff -ruN xv-3.10a-bugfixes/xvps.c xv-3.10a-enhancements/xvps.c ---- xv-3.10a-bugfixes/xvps.c 2005-03-30 08:18:17.000000000 -0800 -+++ xv-3.10a-enhancements/xvps.c 2005-04-17 14:45:28.000000000 -0700 -@@ -142,9 +142,9 @@ - CBCreate(&encapsCB, psW, 240, 7, "preview", infofg, infobg, hicol, locol); - CBCreate(&pscompCB, psW, 331, 7, "compress", infofg, infobg, hicol, locol); - -- DCreate(&xsDial, psW, 240, 30, 80, 100, 10, 800, 100, 5, -+ DCreate(&xsDial, psW, 240, 30, 80, 100, 10.0, 800.0, 100.0, 0.5, 5.0, - infofg, infobg, hicol, locol, "Width", "%"); -- DCreate(&ysDial, psW, 331, 30, 80, 100, 10, 800, 100, 5, -+ DCreate(&ysDial, psW, 331, 30, 80, 100, 10.0, 800.0, 100.0, 0.5, 5.0, - infofg, infobg, hicol, locol, "Height", "%"); - xsDial.drawobj = changedScale; - ysDial.drawobj = changedScale; -@@ -239,10 +239,10 @@ - - if (rd_int("psres")) { /* xv.psres: default paper resolution */ - if (def_int >= 10 && def_int <= 720) { -- int i = (int) ((PIX2INCH * 100) / def_int); -+ double v = (PIX2INCH * 100) / def_int; - -- DSetVal(&xsDial, i); -- DSetVal(&ysDial, i); -+ DSetVal(&xsDial, v); -+ DSetVal(&ysDial, v); - } - } - -@@ -839,7 +839,7 @@ - if (scx < scy) { sz_iny = h * scx; } - else { sz_inx = w * scy; } - -- DSetVal(&xsDial, (int) ((100 * (sz_inx * PIX2INCH) / w) + .5)); -+ DSetVal(&xsDial, 100 * (sz_inx * PIX2INCH) / w); - DSetVal(&ysDial, xsDial.val); - - sz_inx = (double) w / PIX2INCH * (xsDial.val / 100.0); -@@ -1561,9 +1561,9 @@ - the first one is loaded (but not deleted) */ - - #ifdef GS_PATH -- char tmp[512], gscmd[512], cmdstr[512], tmpname[64]; -+ #define CMDSIZE 1024 -+ char tmp[512], gscmd[512], cmdstr[CMDSIZE], tmpname[64]; - int gsresult, nump, i, filetype, doalert, epsf; -- char *rld; - #endif - - pinfo->pic = (byte *) NULL; -@@ -1596,7 +1596,7 @@ - /* build 'gscmd' string */ - - #ifndef VMS /* VMS needs quotes around mixed case command lines */ -- sprintf(gscmd, "%s -sDEVICE=%s -r%d -q -dNOPAUSE -sOutputFile=%s%%d ", -+ sprintf(gscmd, "%s -sDEVICE=%s -r%d -q -dSAFER -dNOPAUSE -sOutputFile=%s%%d ", - GS_PATH, gsDev, gsRes, tmpname); - #else - sprintf(gscmd, -@@ -1734,32 +1734,48 @@ - - /******************************************************************/ - #ifdef GS_PATH --void buildCmdStr(str, gscmd, fname, quick, epsf) -- char *str, *gscmd, *fname; -+void buildCmdStr(str, gscmd, xname, quick, epsf) -+ char *str, *gscmd, *xname; - int quick, epsf; - { - /* note 'epsf' set only on files that don't have a showpage cmd */ -+ char *x, *y, *fname; -+ -+ x = (char *) malloc((5 * strlen(xname))+3); -+ if (!x) -+ FatalError("malloc failure in xvps.c buildCmdStr"); -+ fname = x; -+ *x++ = 0x27; -+ -+ for (y = xname; *y; ++y) { -+ if (0x27 == *y) { -+ strcpy(x, "'\"'\"'"); -+ x += strlen(x); -+ } else *x++ = *y; -+ } -+ strcpy (x, "'"); - - #ifndef VMS - -- if (epsf) sprintf(str, "echo '\n showpage ' | cat '%s' - | %s -", -+ if (epsf) snprintf(str, CMDSIZE, "echo '\n showpage ' | cat %s - | %s -", - fname, gscmd); - -- else if (quick) sprintf(str, "echo '%s' | cat - '%s' | %s -", -+ else if (quick) snprintf(str, CMDSIZE, "echo %s | cat - %s | %s -", - "/showpage { showpage quit } bind def", - fname, gscmd); - -- else sprintf(str, "%s -- %s", gscmd, fname); -+ else snprintf(str, CMDSIZE, "%s -- %s", gscmd, fname); - - #else /* VMS */ - /* VMS doesn't have pipes or an 'echo' command and GS doesn't like -- Unix-style file names as input files in the VMS version */ -+ Unix-style filenames as input files in the VMS version */ - strcat(tmp, " -- "); - rld = strrchr(fname, '/'); /* Pointer to last '/' */ - if (rld) rld++; /* Pointer to filename */ - else rld = fname; /* No path - use original string */ - strcat(tmp, rld); - #endif /* VMS */ -+ free(fname); - } - #endif /* GS_PATH */ - -diff -ruN xv-3.10a-bugfixes/xvrle.c xv-3.10a-enhancements/xvrle.c ---- xv-3.10a-bugfixes/xvrle.c 2005-03-29 23:29:14.000000000 -0800 -+++ xv-3.10a-enhancements/xvrle.c 2004-05-16 18:07:46.000000000 -0700 -@@ -43,7 +43,7 @@ - byte bgcol[256]; - byte maps[3][256]; - int xpos, ypos, w, h, flags, ncolors, pixelbits, ncmap, cmaplen; -- int cmtlen, npixels, bufsize=0; -+ int cmtlen; - byte *img; - long filesize; - char *bname, *errstr; -@@ -176,44 +176,32 @@ - - errstr = NULL; - if (ncolors == 0 || ncolors == 2) -- errstr = "Unsupported number of channels in RLE file"; -+ errstr = "Unsupt. # of channels in RLE file.\n"; - - if (pixelbits != 8) -- errstr = "Only 8-bit pixels supported in RLE files"; -+ errstr = "Only 8-bit pixels supported in RLE files.\n"; - - if (ncmap==0 || ncmap==1 || ncmap == 3 || ncmap == ncolors) { /* ok */ } -- else errstr = "Invalid number of colormap channels in RLE file"; -+ else errstr = "Invalid # of colormap channels in RLE file.\n"; - -- npixels = w * h; -- if (w <= 0 || h <= 0 || npixels/w != h) -- errstr = "RLE image dimensions out of range"; -+ if (w<1 || h<1) -+ errstr = "Bogus size in RLE header.\n"; - - - if (errstr) { - fclose(fp); -- if (pinfo->comment) -- free(pinfo->comment); -- pinfo->comment = (char *) NULL; -+ if (pinfo->comment) free(pinfo->comment); pinfo->comment = (char *) NULL; - return rleError(bname, errstr); - } - - - /* allocate image memory */ -- if (ncolors == 1) -- img = (byte *) calloc((size_t) npixels, (size_t) 1); -- else { -- bufsize = 3*npixels; -- if (bufsize/3 != npixels) -- return rleError(bname, "RLE image dimensions out of range"); -- img = (byte *) calloc((size_t) bufsize, (size_t) 1); -- } -- -+ if (ncolors == 1) img = (byte *) calloc((size_t) w * h, (size_t) 1); -+ else img = (byte *) calloc((size_t) w * h * 3, (size_t) 1); - if (!img) { - fclose(fp); -- if (pinfo->comment) -- free(pinfo->comment); -- pinfo->comment = (char *) NULL; -- return rleError(bname, "Unable to allocate RLE image data"); -+ if (pinfo->comment) free(pinfo->comment); pinfo->comment = (char *) NULL; -+ return rleError(bname, "unable to allocate image data.\n"); - } - - -@@ -221,10 +209,10 @@ - if ((flags & H_CLEARFIRST) && !(flags & H_NO_BACKGROUND)) { - byte *ip; - if (ncolors == 1) { -- for (i=0, ip=img; i<npixels; i++, ip++) *ip = bgcol[0]; -+ for (i=0, ip=img; i<w*h; i++, ip++) *ip = bgcol[0]; - } - else { -- for (i=0, ip=img; i<npixels; i++) -+ for (i=0, ip=img; i<w*h; i++) - for (j=0; j<3; j++, ip++) *ip = bgcol[j]; - } - } -@@ -242,7 +230,7 @@ - if (ncmap) { - byte *ip; - int imagelen, cmask; -- imagelen = (ncolors==1) ? npixels : bufsize; -+ imagelen = (ncolors==1) ? w*h : w*h*3; - cmask = (cmaplen-1); - - if (ncmap == 1) { /* single gamma curve */ -@@ -250,7 +238,7 @@ - } - - else if (ncmap >= 3 && ncolors >=3) { /* one curve per band */ -- for (i=0, ip=img; i<npixels; i++) { -+ for (i=0, ip=img; i<w*h; i++) { - *ip = maps[0][*ip & cmask]; ip++; - *ip = maps[1][*ip & cmask]; ip++; - *ip = maps[2][*ip & cmask]; ip++; -diff -ruN xv-3.10a-bugfixes/xvroot.c xv-3.10a-enhancements/xvroot.c ---- xv-3.10a-bugfixes/xvroot.c 2004-05-16 18:04:21.000000000 -0700 -+++ xv-3.10a-enhancements/xvroot.c 2004-05-16 18:07:52.000000000 -0700 -@@ -44,6 +44,7 @@ - case RM_MIRROR: - case RM_IMIRROR: rpixw = 2*eWIDE; rpixh = 2*eHIGH; break; - case RM_CSOLID: -+ case RM_UPLEFT: - case RM_CWARP: - case RM_CBRICK: rpixw = dispWIDE; rpixh = dispHIGH; break; - -@@ -101,7 +102,7 @@ - - - else if (rmode == RM_CENTER || rmode == RM_CENTILE || rmode == RM_CSOLID || -- rmode == RM_CWARP || rmode == RM_CBRICK) { -+ rmode == RM_CWARP || rmode == RM_CBRICK || rmode == RM_UPLEFT) { - /* do some stuff to set up the border around the picture */ - - if (rmode != RM_CENTILE) { -@@ -138,6 +139,12 @@ - - else if (rmode == RM_CSOLID) { } - -+ else if (rmode == RM_UPLEFT) { -+ -+ XPutImage(theDisp, tmpPix, theGC, theImage, 0,0, 0,0, -+ (u_int) eWIDE, (u_int) eHIGH); -+ } -+ - else if (rmode == RM_CWARP) { /* warp effect */ - XSetForeground(theDisp, theGC, rootfg); - for (i=0; i<=dispWIDE; i+=8) -@@ -157,7 +164,7 @@ - - - /* draw the image centered on top of the background */ -- if (rmode != RM_CENTILE) -+ if ((rmode != RM_CENTILE) && (rmode != RM_UPLEFT)) - XPutImage(theDisp, tmpPix, theGC, theImage, 0,0, - ((int) dispWIDE-eWIDE)/2, ((int) dispHIGH-eHIGH)/2, - (u_int) eWIDE, (u_int) eHIGH); -diff -ruN xv-3.10a-bugfixes/xvsmooth.c xv-3.10a-enhancements/xvsmooth.c ---- xv-3.10a-bugfixes/xvsmooth.c 2004-05-16 18:04:28.000000000 -0700 -+++ xv-3.10a-enhancements/xvsmooth.c 2004-05-16 18:07:59.000000000 -0700 -@@ -105,7 +105,7 @@ - /* we can save a lot of time by precomputing cxtab[] and pxtab[], both - dwide arrays of ints that contain values for the equations: - cx = (ex * swide) / dwide; -- px = ((ex * swide * 100) / dwide) - (cx * 100) - 50; */ -+ px = ((ex * swide * 128) / dwide) - (cx * 128) - 64; */ - - cxtab = (int *) malloc(dwide * sizeof(int)); - if (!cxtab) { free(pic24); return NULL; } -@@ -115,8 +115,8 @@ - - for (ex=0; ex<dwide; ex++) { - cxtab[ex] = (ex * swide) / dwide; -- pxtab[ex] = (((ex * swide)* 100) / dwide) -- - (cxtab[ex] * 100) - 50; -+ pxtab[ex] = (((ex * swide)* 128) / dwide) -+ - (cxtab[ex] * 128) - 64; - } - - for (ey=0; ey<dhigh; ey++) { -@@ -125,7 +125,7 @@ - ProgressMeter(0, (dhigh)-1, ey, "Smooth"); - - cy = (ey * shigh) / dhigh; -- py = (((ey * shigh) * 100) / dhigh) - (cy * 100) - 50; -+ py = (((ey * shigh) * 128) / dhigh) - (cy * 128) - 64; - if (py<0) { y1 = cy-1; if (y1<0) y1=0; } - else { y1 = cy+1; if (y1>shigh-1) y1=shigh-1; } - -@@ -172,30 +172,30 @@ - else { - /* compute weighting factors */ - apx = abs(px); apy = abs(py); -- pA = (apx * apy) / 100; -- pB = (apy * (100 - apx)) / 100; -- pC = (apx * (100 - apy)) / 100; -- pD = 100 - (pA + pB + pC); -+ pA = (apx * apy) >> 7; /* div 128 */ -+ pB = (apy * (128 - apx)) >> 7; /* div 128 */ -+ pC = (apx * (128 - apy)) >> 7; /* div 128 */ -+ pD = 128 - (pA + pB + pC); - - if (is24) { -- *pp++ = ((int) (pA * rA))/100 + ((int) (pB * rB))/100 + -- ((int) (pC * rC))/100 + ((int) (pD * rD))/100; -+ *pp++ = (((int) (pA * rA))>>7) + (((int) (pB * rB))>>7) + -+ (((int) (pC * rC))>>7) + (((int) (pD * rD))>>7); - -- *pp++ = ((int) (pA * gA))/100 + ((int) (pB * gB))/100 + -- ((int) (pC * gC))/100 + ((int) (pD * gD))/100; -+ *pp++ = (((int) (pA * gA))>>7) + (((int) (pB * gB))>>7) + -+ (((int) (pC * gC))>>7) + (((int) (pD * gD))>>7); - -- *pp++ = ((int) (pA * bA))/100 + ((int) (pB * bB))/100 + -- ((int) (pC * bC))/100 + ((int) (pD * bD))/100; -+ *pp++ = (((int) (pA * bA))>>7) + (((int) (pB * bB))>>7) + -+ (((int) (pC * bC))>>7) + (((int) (pD * bD))>>7); - } - else { /* 8-bit pic */ -- *pp++ = ((int) (pA * rmap[cA]))/100 + ((int)(pB * rmap[cB]))/100 + -- ((int) (pC * rmap[cC]))/100 + ((int)(pD * rmap[cD]))/100; -+ *pp++ = (((int)(pA * rmap[cA]))>>7) + (((int)(pB * rmap[cB]))>>7) + -+ (((int)(pC * rmap[cC]))>>7) + (((int)(pD * rmap[cD]))>>7); - -- *pp++ = ((int) (pA * gmap[cA]))/100 + ((int)(pB * gmap[cB]))/100 + -- ((int) (pC * gmap[cC]))/100 + ((int)(pD * gmap[cD]))/100; -+ *pp++ = (((int)(pA * gmap[cA]))>>7) + (((int)(pB * gmap[cB]))>>7) + -+ (((int)(pC * gmap[cC]))>>7) + (((int)(pD * gmap[cD]))>>7); - -- *pp++ = ((int)(pA * bmap[cA]))/100 + ((int)(pB * bmap[cB]))/100 + -- ((int)(pC * bmap[cC]))/100 + ((int)(pD * bmap[cD]))/100; -+ *pp++ = (((int)(pA * bmap[cA]))>>7) + (((int)(pB * bmap[cB]))>>7) + -+ (((int)(pC * bmap[cC]))>>7) + (((int)(pD * bmap[cD]))>>7); - } - } - } -diff -ruN xv-3.10a-bugfixes/xvtext.c xv-3.10a-enhancements/xvtext.c ---- xv-3.10a-bugfixes/xvtext.c 2004-05-16 18:04:38.000000000 -0700 -+++ xv-3.10a-enhancements/xvtext.c 2005-05-01 13:04:23.000000000 -0700 -@@ -19,9 +19,13 @@ - #include "copyright.h" - - #include "xv.h" -+#ifdef TV_MULTILINGUAL -+#include "xvml.h" -+#endif - -- --#define BUTTW 80 -+#define BUTTW1 80 -+#define BUTTW2 60 -+#define BUTTW3 110 - #define BUTTH 24 - - #define TOPMARGIN 30 /* from top of window to top of text window */ -@@ -36,11 +40,28 @@ - #define TV_ASCII 0 - #define TV_HEX 1 - #define TV_CLOSE 2 --#define TV_NBUTTS 3 - -+#define TV_E_NBUTTS 3 -+ -+#ifdef TV_L10N -+# define TV_RESCAN 3 -+# define TV_USASCII 4 -+# define TV_JIS 5 -+# define TV_EUCJ 6 -+# define TV_MSCODE 7 -+ -+# define TV_J_NBUTTS 8 -+#endif - - #define TITLELEN 128 - -+#ifdef TV_MULTILINGUAL -+struct coding_spec { -+ struct coding_system coding_system; -+ char *(*converter)PARM((char *, int, int *)); -+}; -+#endif -+ - /* data needed per text window */ - typedef struct { Window win, textW; - int vis, wasvis; -@@ -57,16 +78,89 @@ - int chwide, chhigh; /* size of textW, in chars */ - int hexmode; /* true if disp Hex, else Ascii */ - SCRL vscrl, hscrl; -- BUTT but[TV_NBUTTS], nopBut; -+#ifdef TV_L10N -+ int code; /* current character code */ -+ BUTT but[TV_J_NBUTTS], nopBut; -+#else -+ BUTT but[TV_E_NBUTTS], nopBut; -+#endif -+#ifdef TV_MULTILINGUAL -+/* int codeset; */ -+ struct coding_spec ccs; /* current coding_spec */ -+ BUTT csbut; -+ char *cv_text; -+ int cv_len; -+ struct context *ctx; -+ struct ml_text *txt; -+ struct csinfo_t *cs; -+#endif - } TVINFO; - - - static TVINFO tinfo[MAXTVWIN]; - static int hasBeenSized = 0; - static int haveWindows = 0; -+static int nbutts; /* # of buttons */ - static int mfwide, mfhigh, mfascent; /* size of chars in mono font */ - static int *event_retP, *event_doneP; /* used in tvChkEvent() */ -- -+#ifdef TV_MULTILINGUAL -+# define TV_PLAIN 0 -+# define TV_ISO_8859_1 1 -+# define TV_ISO_2022_JP 2 -+# define TV_EUC_JAPAN 3 -+# define TV_ISO_2022_INT_1 4 -+# define TV_ISO_2022_KR 5 -+# define TV_EUC_KOREA 6 -+# define TV_ISO_2022_SS2_8 7 -+# define TV_ISO_2022_SS2_7 8 -+# define TV_SHIFT_JIS 9 -+# define TV_NCSS 10 -+static char *codeSetNames[TV_NCSS] = { -+ "plain", -+ "iso-8859-1", -+ "iso-2022-jp", -+ "euc-japan", -+ "iso-2022-int-1", -+ "iso-2022-kr", -+ "euc-korea", -+ "iso-2022-ss2-8", -+ "iso-2022-ss2-7", -+ "Shift JIS", -+}; -+static struct coding_spec coding_spec[TV_NCSS] = { -+ /* --- G0 --- --- G1 --- --- G2 --- --- G3 --- GL GR EOL SF LS */ -+ /* plain */ -+ {{{{ 1,94,'B'}, { 1,94,'B'}, { 1,94,'B'}, { 1,94,'B'}}, 0, 0, 0, 1, 1}, -+ NULL}, -+ /* iso-8859-1 */ -+ {{{{ 1,94,'B'}, { 1,96,'A'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 0, 0}, -+ NULL}, -+ /* iso-2022-jp */ -+ {{{{ 1,94,'B'}, {-1,94,'B'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 0, 0, 1, 0}, -+ NULL}, -+ /* euc-japan */ -+ {{{{ 1,94,'B'}, { 2,94,'B'}, { 1,94,'J'}, { 2,94,'D'}}, 0, 1, 0, 1, 0}, -+ NULL}, -+ /* iso-2022-int-1 */ -+ {{{{ 1,94,'B'}, { 2,94,'C'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 1, 1}, -+ NULL}, -+ /* iso-2022-kr */ -+ {{{{ 1,94,'B'}, { 2,94,'C'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 0, 1}, -+ NULL}, -+ /* euc-korea */ -+ {{{{ 1,94,'B'}, { 2,94,'C'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 0, 0}, -+ NULL}, -+ /* iso-2022-ss2-8 */ -+ {{{{ 1,94,'B'}, {-1,94,'C'}, { 0,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 0, 0}, -+ NULL}, -+ /* iso-2022-ss2-7 */ -+ {{{{ 1,94,'B'}, {-1,94,'C'}, { 0,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 1, 0}, -+ NULL}, -+ /* shift jis */ -+ {{{{ 1,94,'B'}, { 2,94,'B'}, { 1,94,'J'}, { 2,94,'D'}}, 0, 1, 1, 1, 0}, -+ sjis_to_jis}, -+}; -+#endif - - static void closeText PARM((TVINFO *)); - static int tvChkEvent PARM((TVINFO *, XEvent *)); -@@ -82,7 +176,15 @@ - static void textKey PARM((TVINFO *, int)); - static void doHexAsciiCmd PARM((TVINFO *, int)); - static void computeText PARM((TVINFO *)); -- -+#ifdef TV_L10N -+static int selectCodeset PARM((TVINFO *)); -+#endif -+#ifdef TV_MULTILINGUAL -+static void setCodingSpec PARM((TVINFO *, struct coding_spec *)); -+static void createCsWins PARM((char *)); -+static void openCsWin PARM((TVINFO *)); -+static void closeCsWin PARM((TVINFO *)); -+#endif - - /* HEXMODE output looks like this: - 0x00000000: 00 11 22 33 44 55 66 77 - 88 99 aa bb cc dd ee ff 0123456789abcdef -@@ -98,12 +200,51 @@ - XSizeHints hints; - XSetWindowAttributes xswa; - TVINFO *tv; -+#ifdef TV_MULTILINGUAL -+ int default_codeset; -+#endif - -+#ifdef TV_L10N -+ if (!xlocale) { -+#endif -+ mfwide = monofinfo->max_bounds.width; -+ mfhigh = monofinfo->ascent + monofinfo->descent; -+ mfascent = monofinfo->ascent; - -- mfwide = monofinfo->max_bounds.width; -- mfhigh = monofinfo->ascent + monofinfo->descent; -- mfascent = monofinfo->ascent; -+ nbutts = TV_E_NBUTTS; /* # of buttons */ -+#ifdef TV_L10N -+ } -+ else { -+ mfwide = monofsetinfo->max_logical_extent.width / 2; /* shit! */ -+ mfhigh = monofsetinfo->max_logical_extent.height + 1; -+ mfascent = mfhigh; -+ -+ nbutts = TV_J_NBUTTS; /* # of buttons */ -+ } -+#endif - -+#ifdef TV_MULTILINGUAL -+ { -+ char *dc = XGetDefault(theDisp, "xv", "codeSet"); -+ if (dc == NULL) -+ default_codeset = TV_DEFAULT_CODESET; -+ else { -+ for (i = 0; i < TV_NCSS; i++) { -+ if (strcmp(dc, codeSetNames[i]) == 0) -+ break; -+ } -+ if (i >= TV_NCSS) { -+ if (strcmp(dc, "iso-2022") == 0) -+ default_codeset = TV_PLAIN; -+ else { -+ SetISTR(ISTR_WARNING, "%s: unknown codeset.", dc); -+ default_codeset = TV_PLAIN; -+ } -+ } else -+ default_codeset = i; -+ } -+ } -+#endif - /* compute default size of textview windows. should be big enough to - hold an 80x24 text window */ - -@@ -118,6 +259,14 @@ - for (i=0; i<MAXTVWIN; i++) { - tv = &tinfo[i]; - -+#ifdef TV_MULTILINGUAL -+ tv->ctx = ml_create_context(ScreenOfDisplay(theDisp, theScreen)); -+ tv->txt = NULL; -+ tv->cv_text = NULL; -+ tv->cv_len = 0; -+ ml_set_charsets(tv->ctx, &coding_spec[TV_PLAIN].coding_system); -+#endif -+ - tv->win = CreateWindow((i<CMTWIN) ? "xv text viewer" : "xv image comments", - "XVtextview", - (i<CMTWIN) ? geom : cmtgeom, -@@ -162,24 +311,56 @@ - XSelectInput(theDisp, tv->textW, ExposureMask | ButtonPressMask); - - -- BTCreate(&(tv->but[TV_ASCII]), tv->win, 0,0,BUTTW,BUTTH, -+ BTCreate(&(tv->but[TV_ASCII]), tv->win, 0,0,BUTTW1,BUTTH, - "Ascii",infofg,infobg,hicol,locol); -- BTCreate(&(tv->but[TV_HEX]), tv->win, 0,0,BUTTW,BUTTH, -+ BTCreate(&(tv->but[TV_HEX]), tv->win, 0,0,BUTTW1,BUTTH, - "Hex",infofg,infobg,hicol,locol); -- BTCreate(&(tv->but[TV_CLOSE]), tv->win, 0,0,BUTTW,BUTTH, -+ BTCreate(&(tv->but[TV_CLOSE]), tv->win, 0,0,BUTTW1,BUTTH, - "Close",infofg,infobg,hicol,locol); - -+#ifdef TV_L10N -+ if (xlocale) { -+ BTCreate(&(tv->but[TV_RESCAN]), tv->win, 0,0,BUTTW2,BUTTH, -+ "RESCAN",infofg,infobg,hicol,locol); -+ BTCreate(&(tv->but[TV_USASCII]), tv->win, 0,0,BUTTW2,BUTTH, -+ "ASCII",infofg,infobg,hicol,locol); -+ BTCreate(&(tv->but[TV_JIS]), tv->win, 0,0,BUTTW2,BUTTH, -+ "JIS",infofg,infobg,hicol,locol); -+ BTCreate(&(tv->but[TV_EUCJ]), tv->win, 0,0,BUTTW2,BUTTH, -+ "EUC-j",infofg,infobg,hicol,locol); -+ BTCreate(&(tv->but[TV_MSCODE]), tv->win, 0,0,BUTTW2,BUTTH, -+ "MS Kanji",infofg,infobg,hicol,locol); -+ } -+#endif -+ - BTCreate(&(tv->nopBut), tv->win, 0,0, (u_int) tv->vscrl.tsize+1, - (u_int) tv->vscrl.tsize+1, "", infofg, infobg, hicol, locol); - tv->nopBut.active = 0; - - XMapSubwindows(theDisp, tv->win); - -+#ifdef TV_MULTILINGUAL -+ BTCreate(&tv->csbut, tv->win, 0, 0, BUTTW1, BUTTH, "Code Sets", -+ infofg, infobg, hicol, locol); -+#endif -+ - tv->text = (char *) NULL; - tv->textlen = 0; - tv->title[0] = '\0'; -+#ifdef TV_L10N -+ tv->code = (xlocale ? LOCALE_DEFAULT : 0); -+#endif -+#ifdef TV_MULTILINGUAL -+ tv->ccs = coding_spec[default_codeset]; -+#endif - } -- -+#ifdef TV_MULTILINGUAL -+ get_monofont_size(&mfwide, &mfhigh); -+ /* recalculate sizes. */ -+ defwide = 80 * mfwide + 2*LRMARGINS + 8 + 20; /* -ish */ -+ defhigh = 24 * mfhigh + TOPMARGIN + BOTMARGIN + 8 + 20; /* ish */ -+ cmthigh = 6 * mfhigh + TOPMARGIN + BOTMARGIN + 8 + 20; /* ish */ -+#endif - - for (i=0; i<MAXTVWIN; i++) { - resizeText(&tinfo[i], defwide, (i<CMTWIN) ? defhigh : cmthigh); -@@ -190,44 +371,54 @@ - - hasBeenSized = 1; /* we can now start looking at textview events */ - -+#ifdef TV_MULTILINGUAL -+ createCsWins("+100+100"); -+#endif - } - - - /***************************************************************/ --void TextView(fname) -+int TextView(fname) - char *fname; - { - /* given a filename, attempts to read in the file and open a textview win */ - -+ int filetype; - long textlen; - char *text, buf[512], title[128], rfname[MAXPATHLEN+1]; - char *basefname[128]; /* just current fname, no path */ - FILE *fp; -+ char filename[MAXPATHLEN+1]; -+ -+ strncpy(filename, fname, sizeof(filename) - 1); -+#ifdef AUTO_EXPAND -+ Mkvdir(filename); -+ Dirtovd(filename); -+#endif - - basefname[0] = '\0'; -- strcpy(rfname, fname); -+ strncpy(rfname, filename, sizeof(rfname) - 1); - - /* see if this file is compressed. if it is, uncompress it, and view - the uncompressed version */ - -- if (ReadFileType(fname) == RFT_COMPRESS) { -+ filetype = ReadFileType(filename); -+ if ((filetype == RFT_COMPRESS) || (filetype == RFT_BZIP2)) { - #ifndef VMS -- if (!UncompressFile(fname, rfname)) return; /* failed to uncompress */ -+ if (!UncompressFile(filename, rfname, filetype)) return FALSE; - #else - /* chop off trailing '.Z' from friendly displayed basefname, if any */ -- strcpy (basefname, fname); -+ strncpy (basefname, filename, 128 - 1); - *rindex (basefname, '.') = '\0'; -- if (!UncompressFile(basefname, rfname)) return;/* failed to uncompress */ -+ if (!UncompressFile(basefname, rfname, filetype)) return FALSE; - #endif - } - -- -- - fp = fopen(rfname, "r"); - if (!fp) { - sprintf(buf,"Couldn't open '%s': %s", rfname, ERRSTR(errno)); - ErrPopUp(buf,"\nOh well"); -- return; -+ return FALSE; - } - - -@@ -239,16 +430,16 @@ - sprintf(buf, "File '%s' contains no data. (Zero length file.)", rfname); - ErrPopUp(buf, "\nOk"); - fclose(fp); -- return; -+ return FALSE; - } - -- text = (char *) malloc((size_t) textlen); -+ text = (char *) malloc((size_t) textlen + 1); - if (!text) { - sprintf(buf, "Couldn't malloc %ld bytes to read file '%s'", - textlen, rfname); - ErrPopUp(buf, "\nSo what!"); - fclose(fp); -- return; -+ return FALSE; - } - - if (fread(text, (size_t) 1, (size_t) textlen, fp) != textlen) { -@@ -256,6 +447,9 @@ - rfname); - ErrPopUp(buf, "\nHmm..."); - } -+#ifdef TV_MULTILINGUAL -+ text[textlen] = '\0'; -+#endif - - fclose(fp); - -@@ -263,6 +457,7 @@ - OpenTextView(text, (int) textlen, title, 1); - - /* note: text gets freed when window gets closed */ -+ return TRUE; - } - - -@@ -504,6 +699,10 @@ - tv->text = (char *) NULL; - tv->lines = (char **) NULL; - tv->numlines = tv->textlen = tv->hexmode = 0; -+ -+#ifdef TV_MULTILINGUAL -+ closeCsWin(tv); -+#endif - } - - -@@ -591,6 +790,40 @@ - else if (e->window == tv->textW) { } - else rv = 0; - } -+ else if (e->button == Button4) { /* note min vs. max, + vs. - */ -+ /* scroll regardless of where we are in the text window */ -+ if (e->window == tv->win || -+ e->window == tv->vscrl.win || -+ e->window == tv->hscrl.win || -+ e->window == tv->textW) -+ { -+ SCRL *sp=&(tv->vscrl); -+ int halfpage=sp->page/2; -+ -+ if (sp->val > sp->min+halfpage) -+ SCSetVal(sp,sp->val-halfpage); -+ else -+ SCSetVal(sp,sp->min); -+ } -+ else rv = 0; -+ } -+ else if (e->button == Button5) { /* note max vs. min, - vs. + */ -+ /* scroll regardless of where we are in the text window */ -+ if (e->window == tv->win || -+ e->window == tv->vscrl.win || -+ e->window == tv->hscrl.win || -+ e->window == tv->textW) -+ { -+ SCRL *sp=&(tv->vscrl); -+ int halfpage=sp->page/2; -+ -+ if (sp->val < sp->max-halfpage) -+ SCSetVal(sp,sp->val+halfpage); -+ else -+ SCSetVal(sp,sp->max); -+ } -+ else rv = 0; -+ } - else rv = 0; - } - -@@ -633,7 +866,9 @@ - int i, maxw, maxh; - XSizeHints hints; - -+#ifndef TV_MULTILINGUAL - if (tv->wide == w && tv->high == h) return; /* no change in size */ -+#endif - - if (XGetNormalHints(theDisp, tv->win, &hints)) { - hints.width = w; -@@ -657,10 +892,23 @@ - XMoveResizeWindow(theDisp, tv->textW, LRMARGINS, TOPMARGIN, - (u_int) tv->twWide, (u_int) tv->twHigh); - -- for (i=0; i<TV_NBUTTS; i++) { -- tv->but[i].x = tv->wide - (TV_NBUTTS-i) * (BUTTW+5); -+ for (i=0; i<TV_E_NBUTTS; i++) { -+ tv->but[i].x = tv->wide - (TV_E_NBUTTS-i) * (BUTTW1+5); - tv->but[i].y = tv->high - BUTTH - 5; - } -+#ifdef TV_MULTILINGUAL -+ tv->csbut.x = 5; -+ tv->csbut.y = tv->high - BUTTH - 5; -+#endif -+ -+#ifdef TV_L10N -+ if (xlocale) { -+ for (; i<TV_J_NBUTTS; i++) { -+ tv->but[i].x = 5 + (i-TV_E_NBUTTS) * (BUTTW2+5); -+ tv->but[i].y = tv->high - BUTTH - 5; -+ } -+ } -+#endif - - computeScrlVals(tv); - -@@ -711,6 +959,29 @@ - case TV_CLOSE: if (tv == &tinfo[CMTWIN]) CloseCommentText(); - else closeText(tv); - break; -+ -+#ifdef TV_L10N -+ case TV_RESCAN: -+ tv->code = selectCodeset(tv); -+ drawTextW(0, &tv->vscrl); -+ break; -+ case TV_USASCII: -+ tv->code = LOCALE_USASCII; -+ drawTextW(0, &tv->vscrl); -+ break; -+ case TV_JIS: -+ tv->code = LOCALE_JIS; -+ drawTextW(0, &tv->vscrl); -+ break; -+ case TV_EUCJ: -+ tv->code = LOCALE_EUCJ; -+ drawTextW(0, &tv->vscrl); -+ break; -+ case TV_MSCODE: -+ tv->code = LOCALE_MSCODE; -+ drawTextW(0, &tv->vscrl); -+ break; -+#endif /* TV_L10N */ - } - } - -@@ -745,8 +1016,10 @@ - drawNumLines(tv); - - /* draw the buttons */ -- for (i=0; i<TV_NBUTTS; i++) BTRedraw(&(tv->but[i])); -- -+ for (i=0; i<nbutts; i++) BTRedraw(&(tv->but[i])); -+#ifdef TV_MULTILINGUAL -+ BTRedraw(&tv->csbut); -+#endif - BTRedraw(&tv->nopBut); - } - -@@ -816,7 +1089,14 @@ - int delta; - SCRL *sptr; - { -- int i, j, lnum, hpos, cpos, extrach, lwide; -+ int i, j, lnum, hpos, vpos, cpos, lwide; -+#ifndef TV_MULTILINGUAL -+ int extrach; -+#endif -+#ifdef TV_L10N -+ int desig_stat; /* for ISO 2022-JP */ -+ /* 0: ASCII, 1: JIS X 0208, 2: GL is JIS X 0201 kana */ -+#endif - TVINFO *tv; - char linestr[512]; - u_char *sp, *ep, *lp; -@@ -839,12 +1119,38 @@ - XSetFont(theDisp, theGC, monofont); - - hpos = tv->hscrl.val; -+ vpos = tv->vscrl.val; - lwide = (tv->chwide < 500) ? tv->chwide : 500; - - /* draw text */ - if (!tv->hexmode) { /* ASCII mode */ -+#ifdef TV_MULTILINGUAL -+ XClearArea(theDisp, tv->textW, 0, 0, -+ (u_int) tv->twWide, (u_int) tv->twHigh, False); -+ if(tv->txt == NULL) -+ return; -+ else { -+ int i; -+ int y; -+ struct ml_text *tp = tv->txt; -+ struct ml_line *lp; -+ -+ XSetFunction(theDisp, theGC, GXcopy); -+ XSetClipMask(theDisp, theGC, None); -+ y = 3; -+ for (lp = &tp->lines[vpos], i = tp->nlines - vpos; -+ i > 0; lp++, i--) { -+ XDrawText16(theDisp, tv->textW, theGC, -+ -mfwide * hpos + 3, y + lp->ascent, -+ lp->items, lp->nitems); -+ y += lp->ascent + lp->descent; -+ if (y > tv->twHigh) -+ break; -+ } -+ } -+#else - for (i=0; i<tv->chhigh; i++) { /* draw each line */ -- lnum = i + tv->vscrl.val; -+ lnum = i + vpos; - if (lnum < tv->numlines-1) { - - /* find start of displayed portion of line. This is *wildly* -@@ -865,7 +1171,13 @@ - cpos--; sp++; - } - else if (*sp < 32) extrach = 1; -+ -+#ifdef TV_L10N -+ else if (!tv->code && *sp > 127) extrach = 3; -+#else - else if (*sp > 127) extrach = 3; -+#endif -+ - else sp++; - } - else { -@@ -881,6 +1193,10 @@ - - /* build up the linestr buffer, which is the current line, padded - with blanks to a width of exactly tv->chwide chars */ -+#ifdef TV_L10N -+ desig_stat = 0; /* for ISO 2022-JP */ -+ /* 0: ASCII, 1: JIS X 0208, 2: GL is JIS X 0201 kana */ -+#endif - for (cpos=0, lp=(byte *) linestr; cpos<lwide; cpos++, lp++) { - if (sp>=ep) *lp = ' '; - else { -@@ -894,13 +1210,117 @@ - cpos--; lp--; sp++; - } - -+#ifdef TV_L10N -+ else if (*sp < 32 && !(tv->code == LOCALE_JIS && *sp == 0x1b)) { -+#else - else if (*sp < 32) { -+#endif - if (!extrach) extrach = 2; - if (extrach == 2) *lp = '^'; - else if (extrach == 1) *lp = *sp + 64; - } - -+#ifdef TV_L10N -+ /* convert to EUC-Japan */ -+ else if (tv->code == LOCALE_JIS) { -+ if (*sp == 0x1b) { /* ESC */ -+ if (*(sp+1) == '$') { -+ if (*(sp+2) == 'B' || *(sp+2) == 'A' || *(sp+2) == '@') { -+ /* ESC $ B, ESC $ A, ESC $ @ */ -+ desig_stat = 1; -+ sp += 3; cpos--; lp--; -+ } -+ else if (*(sp+2) == '(' && *(sp+3) == 'B') { -+ /* ESC $ ( B */ -+ desig_stat = 1; -+ sp += 4; cpos--; lp--; -+ } -+ } -+ else if (*(sp+1) == '(') { -+ if (*(sp+2) == 'B' || *(sp+2) == 'J' || *(sp+2) == 'H') { -+ /* ESC ( B, ESC ( J, ESC ( H */ -+ desig_stat = 0; -+ sp += 3; cpos--; lp--; -+ } -+ else if (*(sp+2) == 'I') { -+ /* ESC ( I */ -+ desig_stat = 2; -+ sp += 3; cpos--; lp--; -+ } -+ } -+ else if (*(sp+1) == ')' && *(sp+2) == 'I') { -+ /* ESC ) I */ -+ desig_stat = 2; -+ sp += 3; cpos--; lp--; -+ } -+ else { /* error */ -+ *lp = ' '; sp++; -+ } -+ } -+ -+ else { -+ switch (desig_stat) { -+ case 0: /* ASCII */ -+ *lp = *sp++; -+ break; -+ case 1: /* JIS X 0208 */ -+ *lp++ = *sp++ | 0x80; -+ *lp = *sp++ | 0x80; -+ cpos++; -+ break; -+ case 2: /* JIS X 0201 kana */ -+#if defined(__osf__) && !defined(X_LOCALE) -+ *lp = '='; sp++; -+#else -+ *lp++ = 0x8e; /* ^N | 0x80 */ -+ *lp = *sp++ | 0x80; -+#endif -+ break; -+ default: /* error */ -+ *lp = *sp++; -+ break; -+ } -+ } -+ } -+ -+ else if (tv->code == LOCALE_MSCODE) { -+ if ((*sp >= 0x81 && *sp <= 0x9f) -+ || (*sp >= 0xe0 && *sp <= 0xef)) { -+ static u_char c1, c2; -+ -+/*fprintf(stderr, "(%x,%x)->", *sp, *(sp+1));*/ -+ c1 = ((*sp - ((*sp>=0xe0) ? 0xb0 : 0x70)) << 1) -+ - ((*(sp+1)<=0x9e) ? 1 : 0); -+ c2 = *(sp+1); -+ if (c2 >= 0x9f) c2 -= 0x7e; /* 0x9F - 0xFC */ -+ else if (c2 >= 0x80) c2 -= 0x20; /* 0x80 - 0x9E */ -+ else c2 -= 0x1f; /* 0x40 - 0x7E */ -+ -+ *lp++ = c1 | 0x80; -+ *lp = c2 | 0x80; -+ sp += 2; -+/*fprintf(stderr, "(%x %x) ", c1 | 0x80, c2 | 0x80);*/ -+ cpos++; -+ } -+ -+ else if (*sp >= 0xa1 && *sp <= 0xdf) { /* JIS X 0201 kana */ -+#if defined(__osf__) && !defined(X_LOCALE) -+ *lp = '='; sp++; -+#else -+ *lp++ = 0x8e; /* ^N | 0x80 */ -+ *lp = *sp++; -+#endif -+ } -+ -+ else *lp = *sp++; -+ } -+#endif /* TV_L10N */ -+ -+#ifdef TV_L10N -+ else if (!tv->code && *sp > 127) { -+#else - else if (*sp > 127) { -+#endif - if (!extrach) extrach = 4; - if (extrach == 4) *lp = '\\'; - else if (extrach == 3) *lp = ((u_char)(*sp & 0700) >> 6) + '0'; -@@ -916,6 +1336,9 @@ - } - } - } -+#ifdef TV_L10N -+ *lp = '\0'; /* terminate linestr */ -+#endif - } - - else { /* below bottom of file. Just build a blank str */ -@@ -923,15 +1346,22 @@ - } - - /* draw the line */ -- XDrawImageString(theDisp, tv->textW, theGC, -- 3, i*mfhigh + 3 + mfascent, linestr, lwide); -+#ifdef TV_L10N -+ if (xlocale) -+ XmbDrawImageString(theDisp, tv->textW, monofset, theGC, -+ 3, i*mfhigh + 1 + mfascent, linestr, strlen(linestr)); -+ else -+#endif -+ XDrawImageString(theDisp, tv->textW, theGC, -+ 3, i*mfhigh + 3 + mfascent, linestr, lwide); - } /* for i ... */ -+#endif /* TV_MULTILINGUAL */ - } /* if hexmode */ - - - else { /* HEX MODE */ - for (i=0; i<tv->chhigh; i++) { /* draw each line */ -- lnum = i + tv->vscrl.val; -+ lnum = i + vpos; - if (lnum < tv->hexlines) { - - char hexstr[80], tmpstr[16]; -@@ -957,7 +1387,11 @@ - - for (j=0; j<16; j++) { - if (sp+j < ep) { -+#ifdef TV_L10N -+ if (sp[j] >= 32 && (sp[j] <= 127 || tv->code)) *lp++ = sp[j]; -+#else - if (sp[j] >= 32 && sp[j] <= 127) *lp++ = sp[j]; -+#endif - else *lp++ = '.'; - } - else *lp++ = ' '; -@@ -1005,14 +1439,21 @@ - int i; - BUTT *bp; - -- for (i=0, bp=tv->but; i<TV_NBUTTS; i++, bp++) { -+ for (i=0, bp=tv->but; i<nbutts; i++, bp++) { - if (PTINRECT(x,y,bp->x,bp->y,bp->w,bp->h)) break; - } - -- if (i<TV_NBUTTS) { -+ if (i<nbutts) { - if (BTTrack(bp)) doCmd(tv, i); - return; - } -+ -+#ifdef TV_MULTILINGUAL -+ if (PTINRECT(x, y, tv->csbut.x, tv->csbut.y, tv->csbut.w, tv->csbut.h)) { -+ if (BTTrack(&tv->csbut)) -+ openCsWin(tv); -+ } -+#endif - } - - -@@ -1042,13 +1483,38 @@ - - /* keyboard equivalents */ - switch (buf[0]) { -- case '\001': doCmd(tv, TV_ASCII); break; /* ^A = Ascii */ -- case '\010': doCmd(tv, TV_HEX); break; /* ^H = Hex */ -- -- case '\033': doCmd(tv, TV_CLOSE); break; /* ESC = Close window */ -+ case '\001': case 'a': case 'A': -+ doCmd(tv, TV_ASCII); break; /* ^A = Ascii */ -+ case '\010': case 'h': case 'H': -+ doCmd(tv, TV_HEX); break; /* ^H = Hex */ -+ -+ case '\021': case 'q': case 'Q': -+ case '\003': case 'c': case 'C': -+ case '\033': -+ doCmd(tv, TV_CLOSE); break; /* ESC = Close window */ - - default: break; - } -+ -+#ifdef TV_L10N -+ if (xlocale) { -+ switch (buf[0]) { -+ case '\022': case 'r': case 'R': -+ doCmd(tv, TV_RESCAN); break; -+ case '\012': case 'j': case 'J': -+ doCmd(tv, TV_JIS); break; -+ case '\005': case 'e': case 'E': -+ case '\025': case 'u': case 'U': -+ doCmd(tv, TV_EUCJ); break; -+ case '\015': case 'm': case 'M': -+ case '\023': case 's': case 'S': -+ doCmd(tv, TV_MSCODE); break; -+ -+ default: break; -+ } -+ } -+#endif /* TV_L10N */ -+ - } - - -@@ -1109,7 +1575,20 @@ - if (i<tv->numlines-1) SCSetVal(&tv->vscrl, i); - } - -+#ifdef TV_L10N -+ /* redraw text */ -+ if (xlocale) { -+ XClearArea(theDisp, tv->textW, 0, 0, -+ (u_int) tv->twWide, (u_int) tv->twHigh, False); -+ -+ drawTextW(0, &tv->vscrl); -+ } -+#endif -+#ifdef TV_MULTILINGUAL -+ XClearArea(theDisp, tv->textW, 0, 0, -+ (u_int) tv->twWide, (u_int) tv->twHigh, False); - drawTextW(0, &tv->vscrl); -+#endif - } - - -@@ -1122,9 +1601,22 @@ - int i,j,wide,maxwide,space; - byte *sp; - -+#ifdef TV_L10N -+ /* select code-set */ -+ if (xlocale) -+ tv->code = selectCodeset(tv); -+#endif /* TV_L10N */ -+ - if (!tv->text) { - tv->numlines = tv->hexlines = 0; - tv->lines = (char **) NULL; -+#ifdef TV_MULTILINGUAL -+ if (tv->cv_text != NULL) { -+ free(tv->cv_text); -+ tv->cv_text = NULL; -+ } -+ tv->txt = NULL; -+#endif - return; - } - -@@ -1172,17 +1664,129 @@ - wide += space; - } - else if (*sp < 32) wide += 2; -+#ifdef TV_L10N -+ else if (*sp > 127 && !tv->code) wide += 4; -+#else - else if (*sp > 127) wide += 4; -+#endif - else wide++; - } - if (wide > maxwide) maxwide = wide; - } - tv->maxwide = maxwide; - -+#ifdef TV_MULTILINGUAL -+ ml_set_charsets(tv->ctx, &tv->ccs.coding_system); -+ if (tv->cv_text != NULL) { -+ free(tv->cv_text); -+ tv->cv_text = NULL; -+ } -+ if (tv->ccs.converter == NULL) { -+ tv->txt = ml_draw_text(tv->ctx, tv->text, tv->textlen); -+ } else { -+ tv->cv_text = (*tv->ccs.converter)(tv->text, tv->textlen, &tv->cv_len); -+ tv->txt = ml_draw_text(tv->ctx, tv->cv_text, tv->cv_len); -+ } -+ tv->maxwide = tv->txt->width / mfwide; -+ tv->numlines = tv->txt->height / mfhigh + 1; -+#endif -+ - tv->hexlines = (tv->textlen + 15) / 16; - } - - -+/***************************************************/ -+#ifdef TV_L10N -+static int selectCodeset(tv) -+ TVINFO *tv; -+{ -+ u_char *sp; -+ int i, len; -+ int code = LOCALE_USASCII; /* == 0 */ -+ -+ -+ len = tv->textlen; -+ -+ /* select code-set */ -+ if (xlocale) { -+ sp = (u_char *) tv->text; i = 0; -+ while (i < len - 1) { -+ if (*sp == 0x1b && -+ (*(sp+1) == '$' || *(sp+1) == '(' || *(sp+1) == ')')) { -+ code = LOCALE_JIS; -+ break; -+ } -+ -+ else if (*sp >= 0xa1 && *sp <= 0xdf) { -+ if (*(sp+1) >= 0xf0 && *(sp+1) <= 0xfe) { -+ code = LOCALE_EUCJ; -+ break; -+ } -+# if (LOCALE_DEFAULT == LOCALE_EUCJ) -+ else { -+ sp++; i++; -+ } -+# endif -+ } -+ -+ else if ((*sp >= 0x81 && *sp <= 0x9f) || (*sp >= 0xe0 && *sp <= 0xef)) { -+ if ((*(sp+1) >= 0x40 && *(sp+1) <= 0x7e) || *(sp+1) == 0x80) { -+ code = LOCALE_MSCODE; -+ break; -+ } -+ else if (*(sp+1) == 0xfd || *(sp+1) == 0xfe) { -+ code = LOCALE_EUCJ; -+ break; -+ } -+ else { -+ sp++; i++; -+ } -+ } -+ -+ else if (*sp >= 0xf0 && *sp <= 0xfe) { -+ code = LOCALE_EUCJ; -+ break; -+ } -+ -+ sp++; i++; -+ } -+ if (!code) code = LOCALE_DEFAULT; -+ } -+ -+ return code; -+} -+#endif /* TV_L10N */ -+ -+#ifdef TV_MULTILINGUAL -+static void setCodingSpec(tv, cs) -+ TVINFO *tv; -+ struct coding_spec *cs; -+{ -+ if (xvbcmp((char *) &tv->ccs, (char *) cs, sizeof *cs) == 0) -+ return; -+ -+ tv->ccs = *cs; -+#if 0 -+ ml_set_charsets(tv->ctx, &tv->ccs.coding_system); -+ if (tv->cv_text != NULL) { -+ free(tv->cv_text); -+ tv->cv_text = NULL; -+ } -+ if (tv->ccs.converter == NULL) { -+ tv->txt = ml_draw_text(tv->ctx, tv->text, tv->textlen); -+ } else { -+ tv->cv_text = (*tv->ccs.converter)(tv->text, tv->textlen, &tv->cv_len); -+ tv->txt = ml_draw_text(tv->ctx, tv->cv_text, tv->cv_len); -+ } -+#else -+ computeText(tv); -+ computeScrlVals(tv); -+#endif -+ /* drawTextW(0, &tv->vscrl); */ -+} -+#endif -+ -+ - /**********************************************************************/ - /* BUILT-IN TEXT FILES ************************************************/ - /**********************************************************************/ -@@ -1555,8 +2159,509 @@ - OpenTextView(keyhelp, (int) strlen(keyhelp), "XV Help", 0); - } - -+#ifdef TV_MULTILINGUAL -+ -+#define TV_ML_ACCEPT TV_NCSS -+#define TV_ML_CLOSE (TV_ML_ACCEPT + 1) -+#define TV_ML_NBUTTS (TV_ML_CLOSE + 1) -+ -+#define TV_ML_RETCODE 0 -+# define TV_ML_RET_LF 0 -+# define TV_ML_RET_CRLF 1 -+# define TV_ML_RET_CR 2 -+# define TV_ML_RET_ANY 3 -+#define TV_ML_GL 1 -+#define TV_ML_GR 2 -+#define TV_ML_CVTR 3 -+#define TV_ML_NRBUTTS 4 -+ -+#define TV_ML_SHORT 0 -+#define TV_ML_LOCK 1 -+#define TV_ML_NCBUTTS 2 -+ -+#define TV_ML_NLISTS 4 -+ -+#define CSWIDE (BUTTW3 * 5 + 5 * 6) -+#define CSHIGH 450 -+ -+typedef struct csinfo_t { -+ TVINFO *tv; -+ RBUTT *rbt[TV_ML_NRBUTTS]; -+ CBUTT cbt[TV_ML_NCBUTTS]; -+ LIST ls[TV_ML_NLISTS]; -+ BUTT bt[TV_ML_NBUTTS]; -+ int up; -+ Window win; -+ struct coding_spec tcs; /* temporary coding_spec */ -+} CSINFO; -+CSINFO csinfo[MAXTVWIN]; -+static char **regs; -+static int nregs; -+ -+static int csCheckEvent PARM((CSINFO *, XEvent *)); -+static void csReflect PARM((CSINFO *)); -+static void csRedraw PARM((CSINFO *)); -+static void csListRedraw PARM((LIST *)); -+static void csLsRedraw PARM((int, SCRL *)); -+static void create_registry_list PARM((void)); -+ -+static char *(*cvtrtab[])PARM((char *, int, int *)) = { -+ NULL, -+ sjis_to_jis, -+}; -+ -+static void createCsWins(geom) -+ char *geom; -+{ -+ XSetWindowAttributes xswa; -+ int i, j; -+ -+ create_registry_list(); -+ -+ xswa.backing_store = WhenMapped; -+ for (i = 0; i < MAXTVWIN; i++) { -+ char nam[8]; -+ TVINFO *tv = &tinfo[i]; -+ CSINFO *cs = &csinfo[i]; -+ tv->cs = cs; -+ cs->tv = tv; -+ sprintf(nam, "XVcs%d", i); -+ cs->win = CreateWindow("xv codeset", nam, geom, -+ CSWIDE, CSHIGH, infofg, infobg, 0); -+ if (!cs->win) FatalError("couldn't create 'charset' window!"); -+#ifdef BACKING_STORE -+ XChangeWindowAttributes(theDisp, cs->win, CWBackingStore, &xswa); -+#endif -+ XSelectInput(theDisp, cs->win, ExposureMask | ButtonPressMask); -+ -+ DrawString(cs->win, 5, 5 + ASCENT, "Initial States"); -+ for (i = 0; i < TV_ML_NLISTS; i++) { -+ int x, y; -+ char buf[80]; -+ -+ if (i / 2 == 0) -+ x = 15; -+ else -+ x = 280; -+ if (i % 2 == 0) -+ y = 5 + LINEHIGH * 1; -+ else -+ y = 5 + LINEHIGH * 7 + SPACING * 3; -+ -+ sprintf(buf, "Designation for G%d:", i + 1); -+ DrawString(cs->win, x, y + ASCENT, buf); -+ -+ LSCreate(&cs->ls[i], cs->win, x + 15, y + LINEHIGH, -+ 200, LINEHIGH * 5, 5, -+ regs, nregs + 2, -+ infofg, infobg, hicol, locol, csLsRedraw, 0, 0); -+ cs->ls[i].selected = 0; -+ } -+ -+ for (i = 0; i < 2; i++) { -+ char *p; -+ int n; -+ int x, y; -+ -+ if ((p = (char *) malloc(3 * 4)) == NULL) -+ FatalError("out of memory in createCsWins()."); -+ strcpy(p, "G1 G2 G3 G4"); -+ p[2] = p[5] = p[8] = '\0'; -+ n = (i == 0 ? TV_ML_GL : TV_ML_GR); -+ x = (i == 0 ? 15 : 280); -+ y = 235; -+ DrawString(cs->win, x, y + ASCENT, "Assignment for GL:"); -+ x += 15; -+ y += LINEHIGH; -+ cs->rbt[n] = RBCreate(NULL, cs->win, -+ x, y, p, infofg, infobg, hicol, locol); -+ for (j = 1; j < 4; j++) { -+ p += 3; -+ x += 50; -+ RBCreate(cs->rbt[n], cs->win, -+ x, y, p, infofg, infobg, hicol, locol); -+ } -+ } -+ -+ DrawString(cs->win, 5, 280 + ASCENT, "Ret Code:"); -+ cs->rbt[TV_ML_RETCODE] = -+ RBCreate(NULL, cs->win, 20, 300, "LF", infofg,infobg, hicol,locol); -+ RBCreate(cs->rbt[TV_ML_RETCODE], cs->win, 20, 300 + 20, "CR+LF", -+ infofg, infobg, hicol, locol); -+ RBCreate(cs->rbt[TV_ML_RETCODE], cs->win, 90, 300, "CR", -+ infofg, infobg, hicol, locol); -+ RBCreate(cs->rbt[TV_ML_RETCODE], cs->win, 90, 300 + 20, "Any", -+ infofg, infobg, hicol, locol); -+ -+ DrawString(cs->win, 350, 280 + ASCENT, "Converter:"); -+ cs->rbt[TV_ML_CVTR] = -+ RBCreate(NULL, cs->win, 365, 300, "Nothing", -+ infofg, infobg, hicol, locol); -+ RBCreate(cs->rbt[TV_ML_CVTR], cs->win, 365, 300 + 20, "Shift JIS", -+ infofg, infobg, hicol, locol); -+ -+ CBCreate(&cs->cbt[TV_ML_SHORT], cs->win, 200, 300, "Short Form", -+ infofg, infobg, hicol, locol); -+ CBCreate(&cs->cbt[TV_ML_LOCK], cs->win, 200, 320, "Locking Shift", -+ infofg, infobg, hicol, locol); -+ -+ for (j = 0; j < TV_NCSS; j++) { -+ BTCreate(&cs->bt[j], cs->win, -+ 5 + (BUTTW3 + 5) * (j % 5), -+ 350 + 5 + (BUTTH + 5) * (j / 5), -+ BUTTW3, BUTTH, codeSetNames[j], -+ infofg, infobg, hicol, locol); -+ } -+ BTCreate(&cs->bt[TV_ML_ACCEPT], cs->win, -+ CSWIDE - 10 - BUTTW3 * 2, CSHIGH - 5 - BUTTH, BUTTW3, BUTTH, -+ "Accept", infofg, infobg, hicol, locol); -+ BTCreate(&cs->bt[TV_ML_CLOSE], cs->win, -+ CSWIDE - 5 - BUTTW3, CSHIGH - 5 - BUTTH, BUTTW3, BUTTH, -+ "Close", infofg, infobg, hicol, locol); - -+ XMapSubwindows(theDisp, cs->win); -+ cs->up = 0; -+ } -+} - -+static void openCsWin(tv) -+ TVINFO *tv; -+{ -+ CSINFO *cs = tv->cs; -+ if (cs->up) -+ return; - -+ XMapRaised(theDisp, cs->win); -+ cs->up = 1; -+ cs->tcs = cs->tv->ccs; -+ csReflect(cs); -+} - -+static void closeCsWin(tv) -+ TVINFO *tv; -+{ -+ CSINFO *cs = tv->cs; -+ if (!cs->up) -+ return; -+ cs->up = 0; -+ XUnmapWindow(theDisp, cs->win); -+} -+ -+int CharsetCheckEvent(xev) -+ XEvent *xev; -+{ -+ int i; -+ CSINFO *cs; -+ -+ for (cs = csinfo, i = 0; i < MAXTVWIN; cs++, i++) { -+ if (!cs->up) -+ continue; -+ if (csCheckEvent(cs, xev)) -+ break; -+ } -+ if (i < MAXTVWIN) -+ return 1; -+ return 0; -+} -+ -+static int csCheckEvent(cs, xev) -+ CSINFO *cs; -+ XEvent *xev; -+{ -+ RBUTT **rbp; -+ CBUTT *cbp; -+ LIST *ls; -+ BUTT *bp; -+ int i, n; -+ -+ if (xev->type == Expose) { -+ int x, y, w, h; -+ XExposeEvent *e = (XExposeEvent *) xev; -+ x = e->x; y = e->y; w = e->width; h = e->height; -+ -+ if (cs->win == e->window){ -+ csRedraw(cs); -+ return 1; -+ } else { -+ for (i = 0; i < TV_ML_NLISTS; i++) { -+ if (cs->ls[i].win == e->window) { -+ LSRedraw(&cs->ls[i], 0); -+ return 1; -+ } -+ } -+ for (i = 0; i < TV_ML_NLISTS; i++) { -+ if (cs->ls[i].scrl.win == e->window) { -+ SCRedraw(&cs->ls[i].scrl); -+ return 1; -+ } -+ } -+ } -+ } else if (xev->type == ButtonPress) { -+ int x, y; -+ XButtonEvent *e = (XButtonEvent *) xev; -+ x = e->x; y = e->y; -+ if (cs->win == e->window) { -+ for (bp = cs->bt, i = 0; i < TV_ML_NBUTTS; bp++, i++) { -+ if (PTINRECT(x, y, bp->x, bp->y, bp->w, bp->h)) -+ break; -+ } -+ if (i < TV_ML_NBUTTS) { -+ if (BTTrack(bp)) { -+ if (i < TV_NCSS) { -+ cs->tcs = coding_spec[i]; -+ csReflect(cs); -+ } else { -+ switch (i) { -+ case TV_ML_ACCEPT: -+ setCodingSpec(cs->tv, &cs->tcs); -+ break; -+ case TV_ML_CLOSE: -+ closeCsWin(cs->tv); -+ break; -+ } -+ } -+ } -+ return 1; -+ } -+ for (cbp = cs->cbt, i = 0; i < TV_ML_NCBUTTS; cbp++, i++) { -+ if (CBClick(cbp, x, y) && CBTrack(cbp)) -+ break; -+ } -+ if (i < TV_ML_NCBUTTS) { -+ switch (i) { -+ case TV_ML_SHORT: -+ cs->tcs.coding_system.short_form = cbp->val; -+ break; -+ case TV_ML_LOCK: -+ cs->tcs.coding_system.lock_shift = cbp->val; -+ break; -+ } -+ return 1; -+ } -+ for (rbp = cs->rbt, i = 0; i < TV_ML_NRBUTTS; rbp++, i++) { -+ if ((n = RBClick(*rbp, x, y)) >= 0 && RBTrack(*rbp, n)) { -+ break; -+ } -+ } -+ if (i < TV_ML_NRBUTTS) { -+ switch (i) { -+ case TV_ML_RETCODE: -+ cs->tcs.coding_system.eol = n; -+ break; -+ case TV_ML_GL: -+ cs->tcs.coding_system.gl = n; -+ break; -+ case TV_ML_GR: -+ cs->tcs.coding_system.gr = n; -+ break; -+ case TV_ML_CVTR: -+ cs->tcs.converter = cvtrtab[n]; -+ break; -+ } -+ return 1; -+ } -+ } else { -+ for (ls = cs->ls, i = 0; i < TV_ML_NLISTS; ls++, i++) { -+ if (ls->win == e->window) { -+ LSClick(ls, e); -+ n = ls->selected; -+ if (n < nregs) { -+ char r[32], *p = r; -+ int b7; -+ strcpy(r, regs[n]); -+ if ((p = strrchr(r, '/')) != NULL) { -+ *p = '\0'; -+ b7 = (*(p + 1) == 'R' ? 1 : 0); -+ } else -+ b7 = 0; /* shouldn't occur */ -+ cs->tcs.coding_system.design[i] = lookup_design(r, b7); -+ } else if (n == nregs) /* initially none is designed. */ -+ cs->tcs.coding_system.design[i].bpc = 0; -+ else -+ cs->tcs.coding_system.design[i].bpc = -1; -+ return 1; -+ } -+ } -+ for (ls = cs->ls, i = 0; i < TV_ML_NLISTS; ls++, i++) { -+ if (ls->scrl.win == e->window) { -+ SCTrack(&ls->scrl, x, y); -+ return 1; -+ } -+ } -+ } -+ } -+ return 0; -+} -+ -+static void csReflect(cs) -+ CSINFO *cs; -+{ -+ int i; -+ -+ RBSelect(cs->rbt[TV_ML_RETCODE], cs->tcs.coding_system.eol); -+ RBSelect(cs->rbt[TV_ML_GL], cs->tcs.coding_system.gl); -+ RBSelect(cs->rbt[TV_ML_GR], cs->tcs.coding_system.gr); -+ for (i = 0; i < sizeof cvtrtab / sizeof cvtrtab[0]; i++) { -+ if (cs->tcs.converter == cvtrtab[i]) -+ break; -+ } -+ if (i >= sizeof cvtrtab / sizeof cvtrtab[0]) -+ FatalError("program error in csReflect()."); -+ RBSelect(cs->rbt[TV_ML_CVTR], i); -+ -+ cs->cbt[TV_ML_SHORT].val = cs->tcs.coding_system.short_form; -+ cs->cbt[TV_ML_LOCK].val = cs->tcs.coding_system.lock_shift; -+ for (i = 0; i < TV_ML_NLISTS; i++) { -+ struct design design = cs->tcs.coding_system.design[i]; -+ char *reg, r[32]; -+ int b7; -+ int n = 0; -+ switch (design.bpc) { -+ case -1: -+ n = nregs + 1; -+ break; -+ case 0: -+ n = nregs; -+ break; -+ case 1: -+ case 2: -+ if ((reg = lookup_registry(design, &b7)) == NULL) -+ FatalError("internal error in csReflect."); -+ sprintf(r, "%s/%s", reg, b7 ? "Right" : "Left"); -+ for (n = 0; n < nregs; n++) { -+ if (strcmp(regs[n], r) == 0) -+ break; -+ } -+ } -+ cs->ls[i].selected = n; -+ ScrollToCurrent(&cs->ls[i]); -+ } -+ csRedraw(cs); -+ for (i = 0; i < TV_ML_NLISTS; i++) -+ csListRedraw(&cs->ls[i]); -+} -+ -+static void csRedraw(cs) -+ CSINFO *cs; -+{ -+ int i; -+ -+ XSetForeground(theDisp, theGC, infofg); -+ DrawString(cs->win, 5,5 + ASCENT, "Initial States"); -+ for (i = 0; i < TV_ML_NLISTS; i++) { -+ int x, y; -+ char buf[80]; -+ -+ if (i / 2 == 0) -+ x = 15; -+ else -+ x = 280; -+ if (i % 2 == 0) -+ y = 5 + LINEHIGH * 1; -+ else -+ y = 5 + LINEHIGH * 7 + SPACING * 3; -+ -+ sprintf(buf, "Designation for G%d:", i); -+ DrawString(cs->win, x, y + ASCENT, buf); -+ } -+ -+ DrawString(cs->win, 15, 235 + ASCENT, "Invocation for GL:"); -+ DrawString(cs->win, 280, 235 + ASCENT, "Invocation for GR:"); -+ DrawString(cs->win, 5, 280 + ASCENT, "Ret Code:"); -+ DrawString(cs->win, 350, 280 + ASCENT, "Converter:"); -+ -+ for (i = 0; i < TV_ML_NBUTTS; i++) -+ BTRedraw(&cs->bt[i]); -+ for (i = 0; i < TV_ML_NCBUTTS; i++) -+ CBRedraw(&cs->cbt[i]); -+ for (i = 0; i < TV_ML_NRBUTTS; i++) -+ RBRedraw(cs->rbt[i], -1); -+} -+ -+static void csListRedraw(ls) -+ LIST *ls; -+{ -+ int i; -+ for (i = 0; i < TV_ML_NLISTS; i++) { -+ LSRedraw(ls, 0); -+ SCRedraw(&ls->scrl); -+ } -+} -+ -+static void csLsRedraw(delta, sptr) -+ int delta; -+ SCRL *sptr; -+{ -+ int i, j; -+ for (i = 0; i < MAXTVWIN; i++) { -+ for (j = 0; j < TV_ML_NLISTS; j++) { -+ if (sptr == &csinfo[i].ls[j].scrl) { -+ LSRedraw(&csinfo[i].ls[j], delta); -+ return; -+ } -+ } -+ } -+} -+ -+int CharsetDelWin(win) -+ Window win; -+{ -+ CSINFO *cs; -+ int i; -+ -+ for (cs = csinfo, i = 0; i < TV_NCSS; cs++, i++) { -+ if (cs->win == win) { -+ if (cs->up) { -+ XUnmapWindow(theDisp, cs->win); -+ cs->up = 0; -+ } -+ return 1; -+ } -+ } -+ return 0; -+} -+ -+static int reg_comp PARM((const void *, const void *)); -+static void create_registry_list() -+{ -+ struct design d; -+ char *names, *p; -+ int i; -+ -+ if ((p = names = (char *) malloc(32 * 0x80 * 2 * 2)) == NULL) -+ FatalError("out of memory in create_name_list#1."); -+ nregs = 0; -+ for (d.bpc = 1; d.bpc <=2; d.bpc++) { -+ for (d.noc = 94; d.noc <= 96; d.noc += 2) { -+ for (d.des = ' '; (unsigned char) d.des < 0x80; d.des++) { -+ int b7; -+ char *r; -+ if ((r = lookup_registry(d, &b7)) != NULL) { -+ sprintf(p, "%s/%s", r, b7 ? "Right" : "Left"); -+ p += strlen(p) + 1; -+ nregs++; -+ } -+ } -+ } -+ } -+ if ((names = (char *) realloc(names, (size_t) (p - names))) == NULL) -+ FatalError("out of memory in create_name_list#2."); -+ if ((regs = (char **) malloc(sizeof(char *) * (nregs + 3))) == NULL) -+ FatalError("out of memory in create_name_list#3."); -+ p = names; -+ for (i = 0; i < nregs; i++) { -+ regs[i] = p; -+ p += strlen(p) + 1; -+ } -+ qsort(regs, (size_t) nregs, sizeof(char *), reg_comp); -+ regs[i++] = "nothing"; -+ regs[i++] = "unused"; -+ regs[i++] = NULL; -+} -+static int reg_comp(dst, src) -+ const void *dst, *src; -+{ -+ return strcmp(*(char **) dst, *(char **) src); -+} - -+#endif /* TV_MULTILINGUAL */ -diff -ruN xv-3.10a-bugfixes/xvtiff.c xv-3.10a-enhancements/xvtiff.c ---- xv-3.10a-bugfixes/xvtiff.c 2005-03-27 17:25:31.000000000 -0800 -+++ xv-3.10a-enhancements/xvtiff.c 2005-04-17 14:11:55.000000000 -0700 -@@ -512,7 +512,7 @@ - vsprintf(cp, fmt, ap); - strcat(cp, "."); - -- SetISTR(ISTR_WARNING,buf); -+ SetISTR(ISTR_WARNING, "%s", buf); - - error_occurred = 1; - } -@@ -536,7 +536,7 @@ - vsprintf(cp, fmt, ap); - strcat(cp, "."); - -- SetISTR(ISTR_WARNING,buf); -+ SetISTR(ISTR_WARNING, "%s", buf); - } - - -@@ -564,6 +564,10 @@ - static byte **BWmap; - static byte **PALmap; - -+/* XXXX Work around some collisions with the new library. */ -+#define tileContigRoutine _tileContigRoutine -+#define tileSeparateRoutine _tileSeparateRoutine -+ - typedef void (*tileContigRoutine) PARM((byte*, u_char*, RGBvalue*, - uint32, uint32, int, int)); - -@@ -603,7 +607,7 @@ - uint32, uint32, int, int)); - static void put4bitbwtile PARM((byte *, u_char *, RGBvalue *, - uint32, uint32, int, int)); --static void put16bitbwtile PARM((byte *, u_char *, RGBvalue *, -+static void put16bitbwtile PARM((byte *, u_short *, RGBvalue *, - uint32, uint32, int, int)); - - static void putRGBcontig8bittile PARM((byte *, u_char *, RGBvalue *, -@@ -653,7 +657,7 @@ - - default: - TIFFError(TIFFFileName(tif), -- "Sorry, can not handle %d-bit pictures", bitspersample); -+ "Sorry, cannot handle %d-bit pictures", bitspersample); - return (0); - } - -@@ -666,7 +670,7 @@ - - default: - TIFFError(TIFFFileName(tif), -- "Sorry, can not handle %d-channel images", samplesperpixel); -+ "Sorry, cannot handle %d-channel images", samplesperpixel); - return (0); - } - -@@ -1157,7 +1161,7 @@ - b = g + stripsize; - put = pickTileSeparateCase(Map); - if (put == 0) { -- TIFFError(filename, "Can not handle format"); -+ TIFFError(filename, "Cannot handle format"); - return (0); - } - y = setorientation(tif, h); -@@ -1197,7 +1201,7 @@ - /* - * Greyscale images with less than 8 bits/sample are handled - * with a table to avoid lots of shifts and masks. The table -- * is setup so that put*bwtile (below) can retrieve 8/bitspersample -+ * is set up so that put*bwtile (below) can retrieve 8/bitspersample - * pixel values simply by indexing into the table with one - * number. - */ -@@ -1249,11 +1253,11 @@ - - - /* -- * Palette images with <= 8 bits/sample are handled -- * with a table to avoid lots of shifts and masks. The table -- * is setup so that put*cmaptile (below) can retrieve 8/bitspersample -- * pixel values simply by indexing into the table with one -- * number. -+ * Palette images with <= 8 bits/sample are handled with -+ * a table to avoid lots of shifts and masks. The table -+ * is set up so that put*cmaptile (below) can retrieve -+ * (8/bitspersample) pixel-values simply by indexing into -+ * the table with one number. - */ - static int makecmap() - { -@@ -1305,7 +1309,7 @@ - /* - * The following routines move decoded data returned - * from the TIFF library into rasters filled with packed -- * ABGR pixels (i.e. suitable for passing to lrecwrite.) -+ * ABGR pixels (i.e., suitable for passing to lrecwrite.) - * - * The routines have been created according to the most - * important cases and optimized. pickTileContigCase and -@@ -1376,7 +1380,7 @@ - int fromskew, toskew; - { - while (h-- > 0) { -- UNROLL8(w, , *cp++ = PALmap[*pp++][0]) -+ UNROLL8(w, , *cp++ = PALmap[*pp++][0]); - cp += toskew; - pp += fromskew; - } -@@ -1529,7 +1533,7 @@ - */ - static void put16bitbwtile(cp, pp, Map, w, h, fromskew, toskew) - byte *cp; -- u_char *pp; -+ u_short *pp; - RGBvalue *Map; - uint32 w, h; - int fromskew, toskew; -@@ -1538,8 +1542,7 @@ - - while (h-- > 0) { - for (x=w; x>0; x--) { -- *cp++ = Map[(pp[0] << 8) + pp[1]]; -- pp += 2; -+ *cp++ = Map[*pp++]; - } - cp += toskew; - pp += fromskew; -@@ -1577,7 +1580,7 @@ - *cp++ = pp[0]; - *cp++ = pp[1]; - *cp++ = pp[2]; -- pp += samplesperpixel) -+ pp += samplesperpixel); - cp += toskew; - pp += fromskew; - } -@@ -1650,7 +1653,7 @@ - *cp++ = *r++; - *cp++ = *g++; - *cp++ = *b++; -- ) -+ ); - SKEW(r, g, b, fromskew); - cp += toskew; - } -@@ -1857,7 +1860,7 @@ - case PHOTOMETRIC_MINISWHITE: - case PHOTOMETRIC_MINISBLACK: - switch (bitspersample) { -- case 16: put = put16bitbwtile; break; -+ case 16: put = (tileContigRoutine) put16bitbwtile; break; - case 8: put = putgreytile; break; - case 4: put = put4bitbwtile; break; - case 2: put = put2bitbwtile; break; -@@ -1872,7 +1875,7 @@ - break; - } - -- if (put==0) TIFFError(filename, "Can not handle format"); -+ if (put==0) TIFFError(filename, "Cannot handle format"); - return (put); - } - -@@ -1880,8 +1883,8 @@ - /* - * Select the appropriate conversion routine for unpacked data. - * -- * NB: we assume that unpacked single channel data is directed -- * to the "packed routines. -+ * NB: we assume that unpacked single-channel data is directed -+ * to the "packed" routines. - */ - static tileSeparateRoutine pickTileSeparateCase(Map) - RGBvalue* Map; -@@ -1897,10 +1900,32 @@ - break; - } - -- if (put==0) TIFFError(filename, "Can not handle format"); -+ if (put==0) TIFFError(filename, "Cannot handle format"); - return (put); - } - - - -+/*******************************************/ -+void -+VersionInfoTIFF() /* GRR 19980605 */ -+{ -+ char temp[1024], *p, *q; -+ -+ strcpy(temp, TIFFGetVersion()); -+ p = temp; -+ while (!isdigit(*p)) -+ ++p; -+ if ((q = strchr(p, '\n')) != NULL) -+ *q = '\0'; -+ -+ fprintf(stderr, " Compiled with libtiff %s", p); -+#ifdef TIFFLIB_VERSION -+ fprintf(stderr, " of %d", TIFFLIB_VERSION); /* e.g., 19960307 */ -+#endif -+ fprintf(stderr, ".\n"); -+} -+ -+ -+ - #endif /* HAVE_TIFF */ -diff -ruN xv-3.10a-bugfixes/xvtiffwr.c xv-3.10a-enhancements/xvtiffwr.c ---- xv-3.10a-bugfixes/xvtiffwr.c 2005-03-28 08:39:52.000000000 -0800 -+++ xv-3.10a-enhancements/xvtiffwr.c 2005-04-17 14:45:28.000000000 -0700 -@@ -86,6 +86,9 @@ - TIFFSetField(tif, TIFFTAG_GROUP3OPTIONS, - GROUP3OPT_2DENCODING+GROUP3OPT_FILLBITS); - -+ if (comp == COMPRESSION_LZW) -+ TIFFSetField(tif, TIFFTAG_PREDICTOR, 2); -+ - TIFFSetField(tif, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); - TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 1); - TIFFSetField(tif, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); -diff -ruN xv-3.10a-bugfixes/xvvd.c xv-3.10a-enhancements/xvvd.c ---- xv-3.10a-bugfixes/xvvd.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvvd.c 2005-04-17 22:56:02.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvvd.c xv-3.10a/xvvd.c +--- xv-3.10a.orig/xvvd.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvvd.c 2007-04-15 23:30:19.000000000 -0500 @@ -0,0 +1,1101 @@ + +/* @@ -27437,10 +18039,10 @@ diff -ruN xv-3.10a-bugfixes/xvvd.c xv-3.10a-enhancements/xvvd.c + (void)XSetIOErrorHandler(vd_XIOhandler); +} +#endif /* AUTO_EXPAND */ -diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c ---- xv-3.10a-bugfixes/xvwbmp.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvwbmp.c 2005-04-03 14:02:18.000000000 -0700 -@@ -0,0 +1,323 @@ +diff -u -r --new-file xv-3.10a.orig/xvwbmp.c xv-3.10a/xvwbmp.c +--- xv-3.10a.orig/xvwbmp.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvwbmp.c 2007-04-15 23:38:05.000000000 -0500 +@@ -0,0 +1,345 @@ +/* + * xvwbmp.c - i/o routings for WBMP files + * defined by OMA (http://www.openmobilealliance.com) @@ -27470,9 +18072,8 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c +#endif + +#define MUST(a) if (!(a)) {\ -+ return fail(st_fname, st_err);\ + close(fd); \ -+ } ++ return fail(st_fname, st_err); } +#define READU8(fd,u) if ((read(fd, &u, 1)<1)) {\ + myfree(); \ + close(fd); \ @@ -27491,26 +18092,29 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c + return 0; \ + } + -+static char * err_ueof = "Unexpected EOF"; -+static char * err_unst = "Unsupported image type"; -+static char * err_extf = "Extensions are forbidden"; -+static char * err_inmb = "Invalid multibyte integer"; ++static const char err_ueof[] = "Unexpected EOF"; ++static const char err_unst[] = "Unsupported image type"; ++static const char err_extf[] = "Extensions are forbidden"; ++static const char err_inmb[] = "Invalid multibyte integer"; + -+static char * st_fname; -+static char * st_err; ++static const char *st_fname; ++static const char *st_err; + -+static int fail PARM((char *, char *)); -+static int read_mb PARM((int *, int)); -+static void write_mb PARM((uint32, FILE *)); -+static int read_ext PARM((int, uint8)); -+static void * mymalloc PARM((int)); -+static void myfree PARM((void)); -+static uint8 * render1 PARM((uint8 *, int, int)); ++static int fail PARM((const char *, const char *)); ++static int read_mb PARM((int *, int)); ++static void write_mb PARM((uint32, FILE *)); ++static int read_ext PARM((int, uint8)); ++static void *mymalloc PARM((int)); ++static void myfree PARM((void)); ++static uint8 *render1 PARM((uint8 *, int, int)); + -+void ** mymem = NULL; -+int mymems = 0; ++static void **mymem = NULL; ++static int mymems = 0; + -+int LoadWBMP(char * fname, PICINFO * pinfo) ++ ++int LoadWBMP(fname, pinfo) ++ char *fname; ++ PICINFO *pinfo; +{ + int fd; + int im_type; /* image type (only type 0 supported) */ @@ -27582,9 +18186,13 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c + return 1; +} + -+int WriteWBMP(FILE * fp, byte * pic, int ptype, int w, int h, -+ byte * rmap, byte *gmap, byte *bmap, -+ int numcols, int colorstyle) ++ ++int WriteWBMP(fp, pic, ptype, w, h, rmap, gmap, bmap, numcols, colorstyle) ++ FILE *fp; ++ byte *pic; ++ int ptype, w, h; ++ byte *rmap, *gmap, *bmap; ++ int numcols, colorstyle; +{ + int count = 0; + uint8 bit = 0; @@ -27612,13 +18220,18 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c + return 0; +} + -+int fail(char * name, char * msg) ++ ++static int fail(name, msg) ++ const char *name, *msg; +{ + SetISTR(ISTR_WARNING, "%s : %s", name, msg); + return 0; +} + -+void write_mb(uint32 data, FILE * f) ++ ++static void write_mb(data, f) ++ uint32 data; ++ FILE *f; +{ + int i = 32; + uint32 aux = data; @@ -27650,7 +18263,9 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c + +} + -+int read_mb(int * dst, int fd) ++ ++static int read_mb(dst, fd) ++ int *dst, fd; +{ + int ac = 0; + int ct = 0; @@ -27674,7 +18289,10 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c + return 1; +} + -+int read_ext(int fd, uint8 fixed) ++ ++static int read_ext(fd, fixed) ++ int fd; ++ uint8 fixed; +{ + if (!(fixed&0x7f)) { /* no extensions */ + return 1; @@ -27712,15 +18330,18 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c + */ +} + -+void * mymalloc(int l) ++ ++static void *mymalloc(numbytes) ++ int numbytes; +{ + mymem = (void**)realloc(mymem, mymems+1); + if (!mymem) + FatalError("LoadWBMP: can't realloc buffer"); -+ return (mymem[mymems++] = malloc(l)); ++ return (mymem[mymems++] = malloc(numbytes)); +} + -+void myfree() ++ ++static void myfree() +{ + int i; + @@ -27735,7 +18356,10 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c + mymems = 0; +} + -+uint8 * render1(uint8 * data, int size, int npixels) ++ ++static uint8 *render1(data, size, npixels) ++ uint8 *data; ++ int size, npixels; +{ + byte * pic; + int i; @@ -27764,57 +18388,9 @@ diff -ruN xv-3.10a-bugfixes/xvwbmp.c xv-3.10a-enhancements/xvwbmp.c + } + return pic; +} -diff -ruN xv-3.10a-bugfixes/xvxpm.c xv-3.10a-enhancements/xvxpm.c ---- xv-3.10a-bugfixes/xvxpm.c 2005-03-28 22:22:50.000000000 -0800 -+++ xv-3.10a-enhancements/xvxpm.c 2005-04-17 14:45:28.000000000 -0700 -@@ -175,7 +175,15 @@ - - do { - char key[3]; -- char color[40]; /* Need to figure a good size for this... */ -+ char color[80]; /* Need to figure a good size for this... */ -+ -+/* -+ * Problem with spaces in color names -+ * -+ * X s Color Name m Other Name c Last Name -+ * -+ * ... this parser doesn't find `Any Name' -+ */ - - for (j=0; j<2 && (c != ' ') && (c != '\t') && (c != EOF); j++) { - key[j] = c; -@@ -187,7 +195,7 @@ - if (c == EOF) /* The failure condition of getc() */ - return (XpmLoadError(bname, "Error parsing colormap line")); - -- for (j=0; j<39 && (c!=' ') && (c!='\t') && (c!='"') && c!=EOF; j++) { -+ for (j=0; j<79 && (c!=' ') && (c!='\t') && (c!='"') && c!=EOF; j++) { - color[j] = c; - c = XpmGetc(fp); - } -@@ -248,7 +256,7 @@ - else { /* 'None' or unrecognized color spec */ - int rgb; - -- if (strcmp(color, "None") == 0) rgb = 0xb2c0dc; /* infobg */ -+ if (strcasecmp(color, "None") == 0) rgb = 0xb2c0dc; /* infobg */ - else { - SetISTR(ISTR_INFO, "%s: unknown color spec '%s'", bname, color); - Timer(1000); -@@ -321,7 +329,8 @@ - *i_sptr++ = mapentry->cv_rgb[2]; - } - } /* for ( j < w ) */ -- (void)XpmGetc(fp); /* Throw away the close " */ -+ while (((c = XpmGetc(fp))!=EOF) && /* Throw away the close " and */ -+ (c != '"')); /* erase all remaining pixels */ - - if (!(i%7)) WaitCursor(); - } /* for ( i < h ) */ -diff -ruN xv-3.10a-bugfixes/xvzx.c xv-3.10a-enhancements/xvzx.c ---- xv-3.10a-bugfixes/xvzx.c 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-enhancements/xvzx.c 2004-05-16 18:08:33.000000000 -0700 +diff -u -r --new-file xv-3.10a.orig/xvzx.c xv-3.10a/xvzx.c +--- xv-3.10a.orig/xvzx.c 1969-12-31 18:00:00.000000000 -0600 ++++ xv-3.10a/xvzx.c 2007-05-13 19:53:46.000000000 -0500 @@ -0,0 +1,349 @@ +/* + * xvzx.c - load routine for Spectrum screen$ @@ -27842,9 +18418,9 @@ diff -ruN xv-3.10a-bugfixes/xvzx.c xv-3.10a-enhancements/xvzx.c + +#define TRUNCSTR "File appears to be truncated." + -+static int zxError PARM((char *, char *)); ++static int zxError PARM((const char *, const char *)); + -+static char *bname; ++static const char *bname; + +/*******************************************/ +int LoadZX(fname, pinfo) @@ -27971,7 +18547,7 @@ diff -ruN xv-3.10a-bugfixes/xvzx.c xv-3.10a-enhancements/xvzx.c + +/*******************************************/ +static int zxError(fname, st) -+ char *fname, *st; ++ const char *fname, *st; +{ + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; @@ -27983,12 +18559,12 @@ diff -ruN xv-3.10a-bugfixes/xvzx.c xv-3.10a-enhancements/xvzx.c + +byte ZXheader[128] = +{ -+ 'P', 'L', 'U', 'S', '3', 'D', 'O', 'S', 26, /* Spectrum +3DOS file */ -+ 1, 0, /* Header type 1.0 */ -+ 128, 27, 0, 0, /* 7040 bytes */ -+ 3, /* Binary format */ -+ 0, 27, /* 6912 data bytes */ -+ 0, 64 /* load address 0x4000 */ ++ 'P', 'L', 'U', 'S', '3', 'D', 'O', 'S', 26, /* Spectrum +3DOS file */ ++ 1, 0, /* Header type 1.0 */ ++ 128, 27, 0, 0, /* 7040 bytes */ ++ 3, /* Binary format */ ++ 0, 27, /* 6912 data bytes */ ++ 0, 64 /* load address 0x4000 */ +}; + + diff --git a/source/xap/xv/xv-3.10a-jumbo-fix-patch-20050410.txt b/source/xap/xv/xv-3.10a-jumbo-fix-enh-patch-20070520.txt index cc4e72d39..51ff30a98 100644 --- a/source/xap/xv/xv-3.10a-jumbo-fix-patch-20050410.txt +++ b/source/xap/xv/xv-3.10a-jumbo-fix-enh-patch-20070520.txt @@ -1,114 +1,257 @@ -diff : xv-3.10a-jumbo-fix-patch-20050410.txt +diff : xv-3.10a-jumbo-fix-enh-patch-20070520.txt This is a unified diff. It should be applied (using Larry Wall's "patch" -program) to the stock XV 3.10a sources. If desired, the jumbo-enhancements -patch may be applied afterward. +program) to the stock XV 3.10a sources. See the "How to build" section of +README.jumbo, which, along with roughly 40 other new files and 3 new sub- +directories, should have been unpacked along with this jumbo patch: + + README.jumbo + README.pcd + bits/br_bzip2 + bits/br_jp2 + bits/br_jpc + bits/br_mag + bits/br_maki + bits/br_mgcsfx + bits/br_pcd + bits/br_pi + bits/br_pic + bits/br_pic2 + bits/br_png + bits/br_zx + contrib/ + contrib/fnkey-scripts/ + contrib/fnkey-scripts/README + contrib/fnkey-scripts/jpegcrop.sh + contrib/fnkey-scripts/jpegeditcom.sh + contrib/fnkey-scripts/jpeglogrot.sh + contrib/fnkey-scripts/jpegrot.sh + contrib/fnkey-scripts/jpegundocrop.sh + contrib/fedora/ + contrib/fedora/README + contrib/fedora/Build-FC5 + docs/xvdocs.pdf + tiff/RANLIB.sh + xv_mgcsfx.sample + xvhips.c + xvhips.h + xvjp2k.c + xvmag.c + xvmaki.c + xvmgcsfx.c + xvml.c + xvml.h + xvpcd.c + xvpi.c + xvpic.c + xvpic2.c + xvpng.c + xvvd.c + xvwbmp.c + xvzx.c + diffs below: - Makefile - Makefile.std - README.jumbo - bggen.c - bits/icon - cleandir - config.h - copyright.h - tiff/Makefile - tiff/Makefile.std - tiff/RANLIB.sh - vdcomp.c - xcmap.c - xv.c - xv.h - xv24to8.c - xvalg.c - xvbmp.c - xvbrowse.c - xvbutt.c - xvcolor.c - xvctrl.c - xvcut.c - xvdflt.c - xvdial.c - xvdir.c - xvevent.c - xvfits.c - xvgam.c - xvgif.c - xvgifwr.c - xvgrab.c - xvgraf.c - xviff.c - xvimage.c - xvinfo.c - xviris.c - xvjpeg.c - xvmisc.c - xvpbm.c - xvpcx.c - xvpds.c - xvpictoppm.c - xvpm.c - xvpopup.c - xvps.c - xvrle.c - xvroot.c - xvscrl.c - xvsmooth.c - xvsunras.c - xvtarga.c - xvtext.c - xvtiff.c - xvtiffwr.c - xvxbm.c - xvxpm.c - xvxwd.c + + Imakefile + Makefile + Makefile.std + bggen.c + bits/br_targa + bits/icon + cleandir + config.h + copyright.h + docs/bggen.man + docs/xcmap.man + docs/xv.man + docs/xvp2p.man + tiff/Makefile + tiff/Makefile.std + vdcomp.c + xcmap.c + xv.c + xv.h + xv24to8.c + xvalg.c + xvbmp.c + xvbrowse.c + xvbutt.c + xvcolor.c + xvctrl.c + xvcut.c + xvdflt.c + xvdflt.h + xvdial.c + xvdir.c + xvevent.c + xvfits.c + xvgam.c + xvgif.c + xvgifwr.c + xvgrab.c + xvgraf.c + xviff.c + xvimage.c + xvinfo.c + xviris.c + xvjpeg.c + xvmisc.c + xvpbm.c + xvpcx.c + xvpds.c + xvpictoppm.c + xvpm.c + xvpopup.c + xvps.c + xvrle.c + xvroot.c + xvscrl.c + xvsmooth.c + xvsunras.c + xvtarga.c + xvtext.c + xvtiff.c + xvtiffwr.c + xvxbm.c + xvxpm.c + xvxwd.c -diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile +diff -ru xv-3.10a/Imakefile xv-3.10a-enhancements/Imakefile +--- xv-3.10a/Imakefile 1995-01-13 12:24:01.000000000 -0800 ++++ xv-3.10a-enhancements/Imakefile 2005-04-17 14:04:22.000000000 -0700 +@@ -104,6 +104,11 @@ + SGI = -Dsgi + #endif + ++/* install directory of xv_mgcsfx.sample. */ ++MGCSFXDIR = $(LIBDIR) ++/* Directory of default configuration file. */ ++MGCSFX = -DMGCSFXDIR=\"$(MGCSFXDIR)\" ++ + + + +@@ -137,6 +142,8 @@ + #if defined(SCOArchitecture) + SCO= -Dsco -DPOSIX -DNO_RANDOM + SYS_LIBRARIES= -lm -lc -lx ++#elif defined(HPArchitecture) ++SYS_LIBRARIES= -lm -lV3 + #else + SYS_LIBRARIES= -lm + #endif +@@ -147,7 +154,7 @@ + + DEFINES= $(SCO) $(UNIX) $(NODIRENT) $(VPRINTF) $(TIMERS) \ + $(HPUX7) $(JPEG) $(TIFF) $(PDS) $(DXWM) $(RAND) \ +- $(BACKING_STORE) $(BSDTYPES) $(SGI) ++ $(BACKING_STORE) $(BSDTYPES) $(SGI) $(MGCSFX) + + INCLUDES = $(JPEGINCLUDE) $(TIFFINCLUDE) + +@@ -157,7 +164,9 @@ + xvdial.c xvgraf.c xvsunras.c xvjpeg.c xvps.c xvpopup.c xvdflt.c \ + xvtiff.c xvtiffwr.c xvpds.c xvrle.c xviris.c xvgrab.c vprintf.c \ + xvbrowse.c xvtext.c xvpcx.c xviff.c xvtarga.c xvxpm.c xvcut.c \ +- xvxwd.c xvfits.c ++ xvxwd.c xvfits.c xvpng.c xvzx.c xvwbmp.c xvpcd.c \ ++ xvmag.c xvpic.c xvmaki.c xvpi.c xvpic2.c xvvd.c xvmgcsfx.c \ ++ xvml.c + + OBJS1 = xv.o xvevent.o xvroot.o xvmisc.o xvimage.o xvcolor.o xvsmooth.o \ + xv24to8.o xvgif.o xvpm.o xvinfo.o xvctrl.o xvscrl.o xvalg.o \ +@@ -165,7 +174,9 @@ + xvdial.o xvgraf.o xvsunras.o xvjpeg.o xvps.o xvpopup.o xvdflt.o \ + xvtiff.o xvtiffwr.o xvpds.o xvrle.o xviris.o xvgrab.o vprintf.o \ + xvbrowse.o xvtext.o xvpcx.o xviff.o xvtarga.o xvxpm.o xvcut.o \ +- xvxwd.o xvfits.o ++ xvxwd.o xvfits.o xvpng.o xvzx.o xvwbmp.o xvpcd.o \ ++ xvmag.o xvpic.o xvmaki.o xvpi.o xvpic2.o xvvd.o xvmgcsfx.o \ ++ xvml.o + + SRCS2= bggen.c + OBJS2= bggen.o +@@ -266,6 +277,8 @@ + InstallManPageLong(docs/xvp2p,$(MANDIR),xvpictoppm) + InstallManPageLong(docs/vdcomp,$(MANDIR),vdcomp) + ++InstallNonExecFile(xv_mgcsfx.sample,$(MGCSFXDIR)) ++ + tar: + tar cf xv.tar Makefile* Imakefile *.c *.h bits docs \ + docs unsupt vms $(JPEGDIR) $(TIFFDIR) $(MISC) +diff -ru xv-3.10a/Makefile xv-3.10a-enhancements/Makefile --- xv-3.10a/Makefile 1995-01-23 12:20:54.000000000 -0800 -+++ xv-3.10a-bugfixes/Makefile 2005-04-06 08:17:13.000000000 -0700 ++++ xv-3.10a-enhancements/Makefile 2007-05-20 21:17:35.000000000 -0700 @@ -2,7 +2,11 @@ # your C compiler (and options) of choice CC = cc -# CC = gcc -ansi +#CC = gcc -ansi -+# note that -ansi kills __USE_MISC (gcc 2.95.3), which (at least in Linux) ++# note that -ansi kills __USE_MISC (gcc 2.95.3), which, at least on Linux, +# determines whether stdlib.h includes prototypes for mktemp(), random(), etc. +# (i.e., if you use it, you will get unnecessary compiler warnings) +#CC = gcc # use this if you're using 'cc' on a DEC Alpha (OSF/1) or MIPS (Ultrix) system: # CC = cc -std1 -Olimit 750 -@@ -14,8 +18,13 @@ +@@ -14,8 +18,20 @@ # -Wuninitialized -Wparentheses -CCOPTS = -O - +CCOPTS = -O ++# +# these are the usual optimization and warning options for gcc; all such +# warnings but one (mktemp() use) have been eliminated (at least on Linux): +#CCOPTS = -O3 -Wall ++# ++# slightly more warnings... older code often made non-const pointers to ++# static strings (nothing should blow up unless something tries to write ++# to them): ++#CCOPTS = -O3 -Wall -Wpointer-arith -Wcast-align -Wwrite-strings -Wnested-externs ++# +# for the next step up in gcc noise, try adding -W (but note that it adds a +# huge number of unused-parameter and signed/unsigned comparison warnings): +#CCOPTS = -O3 -Wall -W ### NOTE: Sun running OpenWindows: ### if you're using a SUN running OPENWINDOWS, you need to add these two -@@ -27,6 +36,10 @@ +@@ -27,50 +43,155 @@ ### '-I' options on the CCOPTS line to tell the compiler where said files are. ++# older Unixen don't support the -p option, but its lack may mean installation ++# will fail (if more than one directory level is missing) ++MKDIR = mkdir -p ++ ++ +# BeOS _may_ need to use a different version (below), but probably not +CLEANDIR = cleandir + + ### Installation locations - BINDIR = /usr/local/bin - MANDIR = /usr/local/man/man1 -@@ -38,7 +51,7 @@ +-BINDIR = /usr/local/bin +-MANDIR = /usr/local/man/man1 ++### NOTE: Users of old K&R compilers (i.e., any version not supporting C89 ++### string concatenation, such as "fub" "ar" => "fubar") should update ++### xvtext.c:1831 (or thereabouts) if either PREFIX or DOCDIR changes: ++PREFIX = /usr/local ++BINDIR = $(PREFIX)/bin ++MANDIR = $(PREFIX)/share/man/man1 + MANSUF = 1 +-LIBDIR = /usr/local/lib ++DOCDIR = $(PREFIX)/share/doc/xv ++LIBDIR = $(PREFIX)/lib/xv ++SYSCONFDIR = /etc ++DESTDIR = + + + buildit: all ########################### CONFIGURATION OPTIONS ############################ @@ -117,11 +260,9 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile ############################################################################## ### -@@ -59,18 +72,25 @@ - ### if, for whatever reason, you're unable to get the TIFF library to compile - ### on your machine, *COMMENT OUT* the following lines - ### --TIFF = -DDOTIFF ++### if, for whatever reason, you're unable to get the TIFF library to compile ++### on your machine, *COMMENT OUT* the following lines ++### +### GRR 20050319: USE_TILED_TIFF_BOTLEFT_FIX enables an experimental fix for +### tiled TIFFs with ORIENTATION_BOTLEFT. It may break other tiled TIFFs, +### or it may be required for certain other TIFF types (e.g., strips with @@ -130,32 +271,143 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile +### +#TIFF = -DDOTIFF +TIFF = -DDOTIFF -DUSE_TILED_TIFF_BOTLEFT_FIX - TIFFDIR = tiff - TIFFINC = -I$(TIFFDIR) - TIFFLIB = $(TIFFDIR)/libtiff.a - $(TIFFLIB): ++### ++#TIFFDIR = tiff ++TIFFDIR = /usr ++#TIFFDIR = /usr/local ++#TIFFDIR = ../../libtiff ++### ++TIFFINC = -I$(TIFFDIR)/include ++#TIFFINC = -I$(TIFFDIR) ++### ++### libtiff 3.5 and up may be compiled with zlib and libjpeg, but the ++### dependency is properly handled in LIBS line ~247 lines below ++### ++TIFFLIB = -L$(TIFFDIR)/lib -ltiff ++#TIFFLIB = $(TIFFDIR)/lib/libtiff.a ++#TIFFLIB = -L$(TIFFDIR) -ltiff ++#TIFFLIB = $(TIFFDIR)/libtiff.a ++### ++### this is intended to build the ancient version (3.3.016 beta) that's ++### included in the "tiff" subdir of XV, not an arbitrary copy of libtiff: ++### ++#$(TIFFLIB): ++# ( cd $(TIFFDIR) ; make CC='$(CC)' COPTS='$(CCOPTS) $(MCHN)' ) ++ ++ ++### + ### if, for whatever reason, you're unable to get the JPEG library to compile + ### on your machine, *COMMENT OUT* the following lines + ### ++### NOTE: /usr/sfw can be used on Solaris with "Sun freeware" installed ++### + JPEG = -DDOJPEG +-JPEGDIR = jpeg +-JPEGINC = -I$(JPEGDIR) +-JPEGLIB = $(JPEGDIR)/libjpeg.a +-$(JPEGDIR)/jconfig.h: +- cd $(JPEGDIR) ; ./configure CC='$(CC)' +-$(JPEGLIB): $(JPEGDIR)/jconfig.h +- cd $(JPEGDIR) ; make ++#JPEGDIR = jpeg ++JPEGDIR = /usr ++#JPEGDIR = /usr/local ++#JPEGDIR = ../../libjpeg ++#JPEGDIR = /usr/sfw ++### ++JPEGINC = -I$(JPEGDIR)/include ++#JPEGINC = -I$(JPEGDIR) ++### ++JPEGLIB = -L$(JPEGDIR)/lib -ljpeg ++#JPEGLIB = -L$(JPEGDIR) -ljpeg ++#JPEGLIB = $(JPEGDIR)/libjpeg.a ++### ++### this is intended to build the ancient version (5a) that's included in the ++### "jpeg" subdir of XV, not an arbitrary copy of libjpeg: ++### ++#$(JPEGDIR)/jconfig.h: ++# cd $(JPEGDIR) ; ./configure CC='$(CC)' ++#$(JPEGLIB): $(JPEGDIR)/jconfig.h ++# cd $(JPEGDIR) ; make + + + ### +-### if, for whatever reason, you're unable to get the TIFF library to compile ++### if, for whatever reason, you're unable to get the PNG library to compile + ### on your machine, *COMMENT OUT* the following lines + ### +-TIFF = -DDOTIFF +-TIFFDIR = tiff +-TIFFINC = -I$(TIFFDIR) +-TIFFLIB = $(TIFFDIR)/libtiff.a +-$(TIFFLIB): - ( cd $(TIFFDIR) ; make CC='$(CC)' ) -+ ( cd $(TIFFDIR) ; make CC='$(CC)' COPTS='$(CCOPTS) $(MCHN)' ) ++PNG = -DDOPNG ++PNGDIR = /usr ++#PNGDIR = /usr/local ++#PNGDIR = ../../libpng ++### ++PNGINC = -I$(PNGDIR)/include ++#PNGINC = -I$(PNGDIR) ++### ++PNGLIB = -L$(PNGDIR)/lib -lpng ++#PNGLIB = -L$(PNGDIR) -lpng ++#PNGLIB = $(PNGDIR)/libpng.a ++ ++ ++### ++### if, for whatever reason, you're unable to get both the PNG library and ++### (newer versions of) the TIFF library to compile on your machine, *COMMENT ++### OUT* the following lines ++### ++ZLIBDIR = /usr ++#ZLIBDIR = /usr/local ++#ZLIBDIR = ../../zlib ++### ++ZLIBINC = -I$(ZLIBDIR)/include ++#ZLIBINC = -I$(ZLIBDIR) ++### ++ZLIBLIB = -L$(ZLIBDIR)/lib -lz ++#ZLIBLIB = -L$(ZLIBDIR) -lz ++#ZLIBLIB = $(ZLIBDIR)/libz.a ++ ++ ++### ++### if, for whatever reason, you're unable to get the JasPer JPEG-2000 library ++### to compile on your machine, *COMMENT OUT* the following lines ++### ++JP2K = -DDOJP2K ++### ++#JP2KDIR = ../../jasper ++JP2KDIR = /usr/local/lib ++### ++#JP2KINC = -I$(JP2KDIR) ++JP2KINC = -I/usr/local/include ++### ++#JP2KLIB = -L$(JP2KDIR) -ljasper ++JP2KLIB = $(JP2KDIR)/libjasper.a ### ### if, for whatever reason, you're unable to get the PDS/VICAR support ### to compile (xvpds.c, and vdcomp.c), *COMMENT OUT* the following line, -### and also remove 'vdcomp' from the 'all:' dependancy -+### and also remove 'vdcomp' from the 'all:' dependancy ++### and also remove 'vdcomp' from the 'all:' dependency ### PDS = -DDOPDS -@@ -78,17 +98,25 @@ +@@ -78,46 +199,60 @@ #----------System V---------- # if you are running on a SysV-based machine, such as HP, Silicon Graphics, -# Solaris, etc., uncomment the following line to get mostly there. -+# Solaris, etc., uncomment the following line to get mostly there. - #UNIX = -DSVR4 - +-#UNIX = -DSVR4 ++# Solaris, etc.; uncomment one of the following lines to get you *most* of ++# the way there. SYSV means System V R3. ++# UNIX = -DSVR4 ++# UNIX = -DSYSV ++ --#----------Machine Specific Configurations---------- +#----------Machine-Specific Configurations---------- + +### If you are using a BeOS system, uncomment the following line @@ -164,7 +416,8 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile +### The stock version of cleandir now should work for BeOS, too, so try +### leaving this commented out: +#CLEANDIR = cleandir.BeOS -+ + +-#----------Machine Specific Configurations---------- ### If you are using an SGI system, uncomment the following line #MCHN = -Dsgi @@ -175,12 +428,25 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile #MCHN= -Dhpux -D_HPUX_SOURCE # To use old HP compilers (HPUX 7.0 or so), you may need #MCHN= -Dhpux -D_HPUX_SOURCE +Ns4000 -@@ -102,22 +130,22 @@ + # +-# also, if you're using HP's compiler, add '-Aa' to whichever of those ++# Also, if you're using HP's compiler, add '-Aa' to whichever of those + # two lines you're using, to turn on ANSI C mode. Or so I'm told. + # +-# note: You may need to add '-I/usr/include/X11R5' (or R6, or whatever) ++# Note: You may need to add '-I/usr/include/X11R5' (or R6, or whatever) + # to whichever of those lines you used, as HP tends to store their X11 + # include files in a non-standard place... ++# ++# And you probably have to add '-lV3' to the end of the LIBS def when ++# using XV's AUTO_EXPAND option. - ### for LINUX, uncomment the following line +-### for LINUX, uncomment the following line -#MCHN = -DLINUX ++### for Linux, uncomment one of the following lines: +#MCHN = -DLINUX -L/usr/X11R6/lib ++#MCHN = -DLINUX -L/usr/X11R6/lib64 # For SCO 1.1 (UNIX 3.2v2) machines, uncomment the following: @@ -202,7 +468,7 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile # No other switches should be necessary, or so I'm told... # #MCHN = -q extensions=pcc_c -D__UMAXV__ -L/usr2/usr/lib/X11 -DSVR4 -@@ -147,8 +175,8 @@ +@@ -147,8 +282,8 @@ #TIMERS = -DUSLEEP @@ -213,7 +479,7 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile # uncomment the following line: #TIMERS = -DNOTIMER -@@ -160,7 +188,7 @@ +@@ -160,7 +295,7 @@ #DXWM = -DDXWM @@ -222,17 +488,77 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile # 'u_long', 'u_short', 'u_int', etc. as being undefined, uncomment the # following line: #BSDTYPES = -DBSDTYPES -@@ -188,7 +216,9 @@ - $(NODIRENT) $(VPRINTF) $(TIMERS) $(UNIX) $(BSDTYPES) $(RAND) \ - $(DXWM) $(MCHN) +@@ -177,18 +312,38 @@ + #VPRINTF = -DNEED_VPRINTF -DLONGINT -DNOSTDHDRS + + ++# if your machine puts the prototype for 'malloc()' in malloc.h rather than ++# stdlib.h, uncomment the following line: ++# ++#MALLOC = -DNEED_MALLOC_H + + +-################ END OF CONFIGURATION OPTIONS ################# ++# if your X Window System compiled with -DX_LOCALE, ++# uncomment the following line: ++# TVL10N = -DX_LOCALE ++ ++# Install directory of xv_mgcsfx.sample. ++MGCSFXDIR = $(LIBDIR) ++# Directory of default configuration file. ++MGCSFX = -DMGCSFXDIR=\"$(MGCSFXDIR)\" ++ + + + ++################ END OF CONFIGURATION OPTIONS ################# ++ + +-CFLAGS = $(CCOPTS) $(JPEG) $(JPEGINC) $(TIFF) $(TIFFINC) $(PDS) \ +- $(NODIRENT) $(VPRINTF) $(TIMERS) $(UNIX) $(BSDTYPES) $(RAND) \ +- $(DXWM) $(MCHN) +-LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) -lm ++ ++CFLAGS = $(CCOPTS) $(PNG) $(PNGINC) $(ZLIBINC) $(JPEG) $(JPEGINC) \ ++ $(TIFF) $(TIFFINC) $(PDS) $(JP2K) $(JP2KINC) $(TVL10N) $(MGCSFX) \ ++ $(UNIX) $(BSDTYPES) $(RAND) $(MALLOC) $(DXWM) $(MCHN) $(NODIRENT) \ ++ $(VPRINTF) $(TIMERS) -DDOCDIR=\"$(DOCDIR)\" \ ++ -DSYSCONFDIR=\"$(SYSCONFDIR)\" -DXVEXECPATH=\"$(LIBDIR)\" ++ +### remove -lm for BeOS: - LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) -lm -+#LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) ++LIBS = $(TIFFLIB) $(JPEGLIB) $(PNGLIB) $(ZLIBLIB) $(JP2KLIB) -L/usr/X11R6/lib -lX11 -lm ++#LIBS = $(TIFFLIB) $(JPEGLIB) $(PNGLIB) $(ZLIBLIB) $(JP2KLIB) -lX11 OBJS = xv.o xvevent.o xvroot.o xvmisc.o xvimage.o xvcolor.o xvsmooth.o \ xv24to8.o xvgif.o xvpm.o xvinfo.o xvctrl.o xvscrl.o xvalg.o \ -@@ -231,9 +261,10 @@ +@@ -196,7 +351,9 @@ + xvdial.o xvgraf.o xvsunras.o xvjpeg.o xvps.o xvpopup.o xvdflt.o \ + xvtiff.o xvtiffwr.o xvpds.o xvrle.o xviris.o xvgrab.o vprintf.o \ + xvbrowse.o xvtext.o xvpcx.o xviff.o xvtarga.o xvxpm.o xvcut.o \ +- xvxwd.o xvfits.o ++ xvxwd.o xvfits.o xvpng.o xvzx.o xvwbmp.o xvpcd.o xvhips.o \ ++ xvmag.o xvpic.o xvmaki.o xvpi.o xvpic2.o xvvd.o xvmgcsfx.o \ ++ xvml.o xvjp2k.o + + MISC = README INSTALL CHANGELOG IDEAS + +@@ -206,10 +363,12 @@ + + + +-all: $(JPEGLIB) $(TIFFLIB) xv bggen vdcomp xcmap xvpictoppm ++#all: $(JPEGLIB) $(TIFFLIB) xv bggen vdcomp xcmap xvpictoppm ++all: xv bggen vdcomp xcmap xvpictoppm + + +-xv: $(OBJS) $(JPEGLIB) $(TIFFLIB) ++#xv: $(OBJS) $(JPEGLIB) $(TIFFLIB) ++xv: $(OBJS) + $(CC) -o xv $(CFLAGS) $(OBJS) $(LIBS) + + bggen: bggen.c +@@ -231,23 +390,47 @@ clean: xvclean rm -f bggen vdcomp xcmap xvpictoppm @@ -245,9 +571,43 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile + ./$(CLEANDIR) tiff ++# could also do some shell trickery here to attempt mkdir only if dir is ++# missing (e.g., "test -d <dir> || $(MKDIR) <dir>") install: all -@@ -246,8 +277,9 @@ - cp docs/xvdocs.ps* $(LIBDIR) +- cp xv bggen vdcomp xcmap xvpictoppm $(BINDIR) +- cp docs/xv.man $(MANDIR)/xv.$(MANSUF) +- cp docs/bggen.man $(MANDIR)/bggen.$(MANSUF) +- cp docs/xcmap.man $(MANDIR)/xcmap.$(MANSUF) +- cp docs/xvp2p.man $(MANDIR)/xvpictoppm.$(MANSUF) +- cp docs/vdcomp.man $(MANDIR)/vdcomp.$(MANSUF) +- cp docs/xvdocs.ps* $(LIBDIR) ++ $(MKDIR) $(DESTDIR)$(BINDIR) ++ cp xv bggen vdcomp xcmap xvpictoppm $(DESTDIR)$(BINDIR)/. ++ chmod 755 $(DESTDIR)$(BINDIR)/xv $(DESTDIR)$(BINDIR)/bggen \ ++ $(DESTDIR)$(BINDIR)/vdcomp $(DESTDIR)$(BINDIR)/xcmap \ ++ $(DESTDIR)$(BINDIR)/xvpictoppm ++# ++ $(MKDIR) $(DESTDIR)$(MANDIR) ++ cp docs/xv.man $(DESTDIR)$(MANDIR)/xv.$(MANSUF) ++ cp docs/bggen.man $(DESTDIR)$(MANDIR)/bggen.$(MANSUF) ++ cp docs/xcmap.man $(DESTDIR)$(MANDIR)/xcmap.$(MANSUF) ++ cp docs/xvp2p.man $(DESTDIR)$(MANDIR)/xvpictoppm.$(MANSUF) ++ cp docs/vdcomp.man $(DESTDIR)$(MANDIR)/vdcomp.$(MANSUF) ++ chmod 644 $(DESTDIR)$(MANDIR)/xv.$(MANSUF) \ ++ $(DESTDIR)$(MANDIR)/bggen.$(MANSUF) \ ++ $(DESTDIR)$(MANDIR)/xcmap.$(MANSUF) \ ++ $(DESTDIR)$(MANDIR)/xvpictoppm.$(MANSUF) \ ++ $(DESTDIR)$(MANDIR)/vdcomp.$(MANSUF) ++# ++ $(MKDIR) $(DESTDIR)$(DOCDIR) # or $(DESTDIR)$(LIBDIR) ++ cp README.jumbo docs/xvdocs.pdf docs/xvdocs.ps $(DESTDIR)$(DOCDIR)/. ++ chmod 644 $(DESTDIR)$(DOCDIR)/README.jumbo \ ++ $(DESTDIR)$(DOCDIR)/xvdocs.pdf $(DESTDIR)$(DOCDIR)/xvdocs.ps ++# ++ #$(MKDIR) $(DESTDIR)$(SYSCONFDIR) ++ #cp xv_mgcsfx.sample $(DESTDIR)$(SYSCONFDIR)/xv_mgcsfx ++ #chmod 644 $(DESTDIR)$(SYSCONFDIR)/xv_mgcsfx ++ tar: +# tar only local jpeg and tiff dirs, not user's or system's copies: @@ -257,7 +617,7 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile xvtar: tar cvf xv.tar Makefile* Imakefile *.c *.h bits -@@ -257,26 +289,26 @@ +@@ -257,26 +440,28 @@ ################# bitmap dependencies #################### @@ -268,15 +628,19 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile xvbrowse.o: bits/br_file bits/br_dir bits/br_exe bits/br_chr bits/br_blk -xvbrowse.o: bits/br_sock bits/br_fifo bits/br_error bits/br_unknown +-xvbrowse.o: bits/br_cmpres bits/br_gif bits/br_pm bits/br_pbm +xvbrowse.o: bits/br_sock bits/br_fifo bits/br_error # bits/br_unknown - xvbrowse.o: bits/br_cmpres bits/br_gif bits/br_pm bits/br_pbm ++xvbrowse.o: bits/br_cmpres bits/br_bzip2 bits/br_gif bits/br_pm bits/br_pbm xvbrowse.o: bits/br_sunras bits/br_bmp bits/br_utah bits/br_iris -xvbrowse.o: bits/br_pcx bits/br_jfif bits/br_tiff bits/br_pds -+xvbrowse.o: bits/br_pcx bits/br_jfif bits/br_tiff bits/br_pds - xvbrowse.o: bits/br_ps bits/br_iff bits/br_targa bits/br_xpm +-xvbrowse.o: bits/br_ps bits/br_iff bits/br_targa bits/br_xpm ++xvbrowse.o: bits/br_pcx bits/br_jfif bits/br_tiff bits/br_pds bits/br_pcd ++xvbrowse.o: bits/br_ps bits/br_iff bits/br_targa bits/br_xpm bits/br_xwd ++xvbrowse.o: bits/br_fits bits/br_png bits/br_zx bits/br_mag bits/br_maki ++xvbrowse.o: bits/br_pic bits/br_pi bits/br_pic2 bits/br_mgcsfx ++xvbrowse.o: bits/br_jp2 bits/br_jpc xvbrowse.o: bits/br_trash bits/fcurs bits/fccurs bits/fdcurs bits/fcursm -xvbrowse.o: bits/br_xwd -+xvbrowse.o: bits/br_xwd xvbutt.o: bits/cboard50 bits/rb_frame bits/rb_frame1 bits/rb_top xvbutt.o: bits/rb_bot bits/rb_dtop bits/rb_dbot bits/rb_body @@ -291,7 +655,7 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile xvctrl.o: bits/uicon bits/oicon1 bits/oicon2 bits/icon xvctrl.o: bits/padimg bits/annot -@@ -285,13 +317,13 @@ +@@ -285,13 +470,13 @@ xvdflt.o: bits/logo_top bits/logo_bot bits/logo_out bits/xv_jhb xvdflt.o: bits/xv_cpyrt bits/xv_rev bits/xv_ver xvdflt.o: bits/xf_left bits/xf_right bits/font5x9.h @@ -307,50 +671,76 @@ diff -ruN xv-3.10a/Makefile xv-3.10a-bugfixes/Makefile xvevent.o: bits/blur bits/blurm xvgam.o: bits/h_rotl bits/h_rotr bits/h_flip bits/h_sinc bits/h_sdec -diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std +diff -ru xv-3.10a/Makefile.std xv-3.10a-enhancements/Makefile.std --- xv-3.10a/Makefile.std 1995-01-23 17:06:26.000000000 -0800 -+++ xv-3.10a-bugfixes/Makefile.std 2005-04-06 08:17:13.000000000 -0700 ++++ xv-3.10a-enhancements/Makefile.std 2007-05-20 21:17:35.000000000 -0700 @@ -2,7 +2,11 @@ # your C compiler (and options) of choice CC = cc -# CC = gcc -ansi +#CC = gcc -ansi -+# note that -ansi kills __USE_MISC (gcc 2.95.3), which (at least in Linux) ++# note that -ansi kills __USE_MISC (gcc 2.95.3), which, at least on Linux, +# determines whether stdlib.h includes prototypes for mktemp(), random(), etc. +# (i.e., if you use it, you will get unnecessary compiler warnings) +#CC = gcc # use this if you're using 'cc' on a DEC Alpha (OSF/1) or MIPS (Ultrix) system: # CC = cc -std1 -Olimit 750 -@@ -14,8 +18,13 @@ +@@ -14,8 +18,20 @@ # -Wuninitialized -Wparentheses -CCOPTS = -O - +CCOPTS = -O ++# +# these are the usual optimization and warning options for gcc; all such +# warnings but one (mktemp() use) have been eliminated (at least on Linux): +#CCOPTS = -O3 -Wall ++# ++# slightly more warnings... older code often made non-const pointers to ++# static strings (nothing should blow up unless something tries to write ++# to them): ++#CCOPTS = -O3 -Wall -Wpointer-arith -Wcast-align -Wwrite-strings -Wnested-externs ++# +# for the next step up in gcc noise, try adding -W (but note that it adds a +# huge number of unused-parameter and signed/unsigned comparison warnings): +#CCOPTS = -O3 -Wall -W ### NOTE: Sun running OpenWindows: ### if you're using a SUN running OPENWINDOWS, you need to add these two -@@ -27,6 +36,10 @@ +@@ -27,50 +43,155 @@ ### '-I' options on the CCOPTS line to tell the compiler where said files are. ++# older Unixen don't support the -p option, but its lack may mean installation ++# will fail (if more than one directory level is missing) ++MKDIR = mkdir -p ++ ++ +# BeOS _may_ need to use a different version (below), but probably not +CLEANDIR = cleandir + + ### Installation locations - BINDIR = /usr/local/bin - MANDIR = /usr/local/man/man1 -@@ -38,7 +51,7 @@ +-BINDIR = /usr/local/bin +-MANDIR = /usr/local/man/man1 ++### NOTE: Users of old K&R compilers (i.e., any version not supporting C89 ++### string concatenation, such as "fub" "ar" => "fubar") should update ++### xvtext.c:1831 (or thereabouts) if either PREFIX or DOCDIR changes: ++PREFIX = /usr/local ++BINDIR = $(PREFIX)/bin ++MANDIR = $(PREFIX)/share/man/man1 + MANSUF = 1 +-LIBDIR = /usr/local/lib ++DOCDIR = $(PREFIX)/share/doc/xv ++LIBDIR = $(PREFIX)/lib/xv ++SYSCONFDIR = /etc ++DESTDIR = + + + buildit: all ########################### CONFIGURATION OPTIONS ############################ @@ -359,11 +749,9 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std ############################################################################## ### -@@ -59,18 +72,25 @@ - ### if, for whatever reason, you're unable to get the TIFF library to compile - ### on your machine, *COMMENT OUT* the following lines - ### --TIFF = -DDOTIFF ++### if, for whatever reason, you're unable to get the TIFF library to compile ++### on your machine, *COMMENT OUT* the following lines ++### +### GRR 20050319: USE_TILED_TIFF_BOTLEFT_FIX enables an experimental fix for +### tiled TIFFs with ORIENTATION_BOTLEFT. It may break other tiled TIFFs, +### or it may be required for certain other TIFF types (e.g., strips with @@ -372,32 +760,143 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std +### +#TIFF = -DDOTIFF +TIFF = -DDOTIFF -DUSE_TILED_TIFF_BOTLEFT_FIX - TIFFDIR = tiff - TIFFINC = -I$(TIFFDIR) - TIFFLIB = $(TIFFDIR)/libtiff.a - $(TIFFLIB): ++### ++#TIFFDIR = tiff ++TIFFDIR = /usr ++#TIFFDIR = /usr/local ++#TIFFDIR = ../../libtiff ++### ++TIFFINC = -I$(TIFFDIR)/include ++#TIFFINC = -I$(TIFFDIR) ++### ++### libtiff 3.5 and up may be compiled with zlib and libjpeg, but the ++### dependency is properly handled in LIBS line ~247 lines below ++### ++TIFFLIB = -L$(TIFFDIR)/lib -ltiff ++#TIFFLIB = $(TIFFDIR)/lib/libtiff.a ++#TIFFLIB = -L$(TIFFDIR) -ltiff ++#TIFFLIB = $(TIFFDIR)/libtiff.a ++### ++### this is intended to build the ancient version (3.3.016 beta) that's ++### included in the "tiff" subdir of XV, not an arbitrary copy of libtiff: ++### ++#$(TIFFLIB): ++# ( cd $(TIFFDIR) ; make CC='$(CC)' COPTS='$(CCOPTS) $(MCHN)' ) ++ ++ ++### + ### if, for whatever reason, you're unable to get the JPEG library to compile + ### on your machine, *COMMENT OUT* the following lines + ### ++### NOTE: /usr/sfw can be used on Solaris with "Sun freeware" installed ++### + JPEG = -DDOJPEG +-JPEGDIR = jpeg +-JPEGINC = -I$(JPEGDIR) +-JPEGLIB = $(JPEGDIR)/libjpeg.a +-$(JPEGDIR)/jconfig.h: +- cd $(JPEGDIR) ; ./configure CC='$(CC)' +-$(JPEGLIB): $(JPEGDIR)/jconfig.h +- cd $(JPEGDIR) ; make ++#JPEGDIR = jpeg ++JPEGDIR = /usr ++#JPEGDIR = /usr/local ++#JPEGDIR = ../../libjpeg ++#JPEGDIR = /usr/sfw ++### ++JPEGINC = -I$(JPEGDIR)/include ++#JPEGINC = -I$(JPEGDIR) ++### ++JPEGLIB = -L$(JPEGDIR)/lib -ljpeg ++#JPEGLIB = -L$(JPEGDIR) -ljpeg ++#JPEGLIB = $(JPEGDIR)/libjpeg.a ++### ++### this is intended to build the ancient version (5a) that's included in the ++### "jpeg" subdir of XV, not an arbitrary copy of libjpeg: ++### ++#$(JPEGDIR)/jconfig.h: ++# cd $(JPEGDIR) ; ./configure CC='$(CC)' ++#$(JPEGLIB): $(JPEGDIR)/jconfig.h ++# cd $(JPEGDIR) ; make + + + ### +-### if, for whatever reason, you're unable to get the TIFF library to compile ++### if, for whatever reason, you're unable to get the PNG library to compile + ### on your machine, *COMMENT OUT* the following lines + ### +-TIFF = -DDOTIFF +-TIFFDIR = tiff +-TIFFINC = -I$(TIFFDIR) +-TIFFLIB = $(TIFFDIR)/libtiff.a +-$(TIFFLIB): - ( cd $(TIFFDIR) ; make CC='$(CC)' ) -+ ( cd $(TIFFDIR) ; make CC='$(CC)' COPTS='$(CCOPTS) $(MCHN)' ) ++PNG = -DDOPNG ++PNGDIR = /usr ++#PNGDIR = /usr/local ++#PNGDIR = ../../libpng ++### ++PNGINC = -I$(PNGDIR)/include ++#PNGINC = -I$(PNGDIR) ++### ++PNGLIB = -L$(PNGDIR)/lib -lpng ++#PNGLIB = -L$(PNGDIR) -lpng ++#PNGLIB = $(PNGDIR)/libpng.a ++ ++ ++### ++### if, for whatever reason, you're unable to get both the PNG library and ++### (newer versions of) the TIFF library to compile on your machine, *COMMENT ++### OUT* the following lines ++### ++ZLIBDIR = /usr ++#ZLIBDIR = /usr/local ++#ZLIBDIR = ../../zlib ++### ++ZLIBINC = -I$(ZLIBDIR)/include ++#ZLIBINC = -I$(ZLIBDIR) ++### ++ZLIBLIB = -L$(ZLIBDIR)/lib -lz ++#ZLIBLIB = -L$(ZLIBDIR) -lz ++#ZLIBLIB = $(ZLIBDIR)/libz.a ++ ++ ++### ++### if, for whatever reason, you're unable to get the JasPer JPEG-2000 library ++### to compile on your machine, *COMMENT OUT* the following lines ++### ++JP2K = -DDOJP2K ++### ++#JP2KDIR = ../../jasper ++JP2KDIR = /usr/local/lib ++### ++#JP2KINC = -I$(JP2KDIR) ++JP2KINC = -I/usr/local/include ++### ++#JP2KLIB = -L$(JP2KDIR) -ljasper ++JP2KLIB = $(JP2KDIR)/libjasper.a ### ### if, for whatever reason, you're unable to get the PDS/VICAR support ### to compile (xvpds.c, and vdcomp.c), *COMMENT OUT* the following line, -### and also remove 'vdcomp' from the 'all:' dependancy -+### and also remove 'vdcomp' from the 'all:' dependancy ++### and also remove 'vdcomp' from the 'all:' dependency ### PDS = -DDOPDS -@@ -78,17 +98,25 @@ +@@ -78,46 +199,60 @@ #----------System V---------- # if you are running on a SysV-based machine, such as HP, Silicon Graphics, -# Solaris, etc., uncomment the following line to get mostly there. -+# Solaris, etc., uncomment the following line to get mostly there. - #UNIX = -DSVR4 - +-#UNIX = -DSVR4 ++# Solaris, etc.; uncomment one of the following lines to get you *most* of ++# the way there. SYSV means System V R3. ++# UNIX = -DSVR4 ++# UNIX = -DSYSV ++ --#----------Machine Specific Configurations---------- +#----------Machine-Specific Configurations---------- + +### If you are using a BeOS system, uncomment the following line @@ -406,7 +905,8 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std +### The stock version of cleandir now should work for BeOS, too, so try +### leaving this commented out: +#CLEANDIR = cleandir.BeOS -+ + +-#----------Machine Specific Configurations---------- ### If you are using an SGI system, uncomment the following line #MCHN = -Dsgi @@ -417,12 +917,25 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std #MCHN= -Dhpux -D_HPUX_SOURCE # To use old HP compilers (HPUX 7.0 or so), you may need #MCHN= -Dhpux -D_HPUX_SOURCE +Ns4000 -@@ -102,22 +130,22 @@ + # +-# also, if you're using HP's compiler, add '-Aa' to whichever of those ++# Also, if you're using HP's compiler, add '-Aa' to whichever of those + # two lines you're using, to turn on ANSI C mode. Or so I'm told. + # +-# note: You may need to add '-I/usr/include/X11R5' (or R6, or whatever) ++# Note: You may need to add '-I/usr/include/X11R5' (or R6, or whatever) + # to whichever of those lines you used, as HP tends to store their X11 + # include files in a non-standard place... ++# ++# And you probably have to add '-lV3' to the end of the LIBS def when ++# using XV's AUTO_EXPAND option. - ### for LINUX, uncomment the following line +-### for LINUX, uncomment the following line -#MCHN = -DLINUX ++### for Linux, uncomment one of the following lines: +#MCHN = -DLINUX -L/usr/X11R6/lib ++#MCHN = -DLINUX -L/usr/X11R6/lib64 # For SCO 1.1 (UNIX 3.2v2) machines, uncomment the following: @@ -444,7 +957,7 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std # No other switches should be necessary, or so I'm told... # #MCHN = -q extensions=pcc_c -D__UMAXV__ -L/usr2/usr/lib/X11 -DSVR4 -@@ -147,8 +175,8 @@ +@@ -147,8 +282,8 @@ #TIMERS = -DUSLEEP @@ -455,7 +968,7 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std # uncomment the following line: #TIMERS = -DNOTIMER -@@ -160,7 +188,7 @@ +@@ -160,7 +295,7 @@ #DXWM = -DDXWM @@ -464,17 +977,77 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std # 'u_long', 'u_short', 'u_int', etc. as being undefined, uncomment the # following line: #BSDTYPES = -DBSDTYPES -@@ -188,7 +216,9 @@ - $(NODIRENT) $(VPRINTF) $(TIMERS) $(UNIX) $(BSDTYPES) $(RAND) \ - $(DXWM) $(MCHN) +@@ -177,18 +312,38 @@ + #VPRINTF = -DNEED_VPRINTF -DLONGINT -DNOSTDHDRS + + ++# if your machine puts the prototype for 'malloc()' in malloc.h rather than ++# stdlib.h, uncomment the following line: ++# ++#MALLOC = -DNEED_MALLOC_H + + +-################ END OF CONFIGURATION OPTIONS ################# ++# if your X Window System compiled with -DX_LOCALE, ++# uncomment the following line: ++# TVL10N = -DX_LOCALE ++ ++# Install directory of xv_mgcsfx.sample. ++MGCSFXDIR = $(LIBDIR) ++# Directory of default configuration file. ++MGCSFX = -DMGCSFXDIR=\"$(MGCSFXDIR)\" ++ + + + ++################ END OF CONFIGURATION OPTIONS ################# ++ + +-CFLAGS = $(CCOPTS) $(JPEG) $(JPEGINC) $(TIFF) $(TIFFINC) $(PDS) \ +- $(NODIRENT) $(VPRINTF) $(TIMERS) $(UNIX) $(BSDTYPES) $(RAND) \ +- $(DXWM) $(MCHN) +-LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) -lm ++ ++CFLAGS = $(CCOPTS) $(PNG) $(PNGINC) $(ZLIBINC) $(JPEG) $(JPEGINC) \ ++ $(TIFF) $(TIFFINC) $(PDS) $(JP2K) $(JP2KINC) $(TVL10N) $(MGCSFX) \ ++ $(UNIX) $(BSDTYPES) $(RAND) $(MALLOC) $(DXWM) $(MCHN) $(NODIRENT) \ ++ $(VPRINTF) $(TIMERS) -DDOCDIR=\"$(DOCDIR)\" \ ++ -DSYSCONFDIR=\"$(SYSCONFDIR)\" -DXVEXECPATH=\"$(LIBDIR)\" ++ +### remove -lm for BeOS: - LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) -lm -+#LIBS = -lX11 $(JPEGLIB) $(TIFFLIB) ++LIBS = $(TIFFLIB) $(JPEGLIB) $(PNGLIB) $(ZLIBLIB) $(JP2KLIB) -L/usr/X11R6/lib -lX11 -lm ++#LIBS = $(TIFFLIB) $(JPEGLIB) $(PNGLIB) $(ZLIBLIB) $(JP2KLIB) -lX11 OBJS = xv.o xvevent.o xvroot.o xvmisc.o xvimage.o xvcolor.o xvsmooth.o \ xv24to8.o xvgif.o xvpm.o xvinfo.o xvctrl.o xvscrl.o xvalg.o \ -@@ -231,9 +261,10 @@ +@@ -196,7 +351,9 @@ + xvdial.o xvgraf.o xvsunras.o xvjpeg.o xvps.o xvpopup.o xvdflt.o \ + xvtiff.o xvtiffwr.o xvpds.o xvrle.o xviris.o xvgrab.o vprintf.o \ + xvbrowse.o xvtext.o xvpcx.o xviff.o xvtarga.o xvxpm.o xvcut.o \ +- xvxwd.o xvfits.o ++ xvxwd.o xvfits.o xvpng.o xvzx.o xvwbmp.o xvpcd.o xvhips.o \ ++ xvmag.o xvpic.o xvmaki.o xvpi.o xvpic2.o xvvd.o xvmgcsfx.o \ ++ xvml.o xvjp2k.o + + MISC = README INSTALL CHANGELOG IDEAS + +@@ -206,10 +363,12 @@ + + + +-all: $(JPEGLIB) $(TIFFLIB) xv bggen vdcomp xcmap xvpictoppm ++#all: $(JPEGLIB) $(TIFFLIB) xv bggen vdcomp xcmap xvpictoppm ++all: xv bggen vdcomp xcmap xvpictoppm + + +-xv: $(OBJS) $(JPEGLIB) $(TIFFLIB) ++#xv: $(OBJS) $(JPEGLIB) $(TIFFLIB) ++xv: $(OBJS) + $(CC) -o xv $(CFLAGS) $(OBJS) $(LIBS) + + bggen: bggen.c +@@ -231,23 +390,47 @@ clean: xvclean rm -f bggen vdcomp xcmap xvpictoppm @@ -487,9 +1060,43 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std + ./$(CLEANDIR) tiff ++# could also do some shell trickery here to attempt mkdir only if dir is ++# missing (e.g., "test -d <dir> || $(MKDIR) <dir>") install: all -@@ -246,8 +277,9 @@ - cp docs/xvdocs.ps* $(LIBDIR) +- cp xv bggen vdcomp xcmap xvpictoppm $(BINDIR) +- cp docs/xv.man $(MANDIR)/xv.$(MANSUF) +- cp docs/bggen.man $(MANDIR)/bggen.$(MANSUF) +- cp docs/xcmap.man $(MANDIR)/xcmap.$(MANSUF) +- cp docs/xvp2p.man $(MANDIR)/xvpictoppm.$(MANSUF) +- cp docs/vdcomp.man $(MANDIR)/vdcomp.$(MANSUF) +- cp docs/xvdocs.ps* $(LIBDIR) ++ $(MKDIR) $(DESTDIR)$(BINDIR) ++ cp xv bggen vdcomp xcmap xvpictoppm $(DESTDIR)$(BINDIR)/. ++ chmod 755 $(DESTDIR)$(BINDIR)/xv $(DESTDIR)$(BINDIR)/bggen \ ++ $(DESTDIR)$(BINDIR)/vdcomp $(DESTDIR)$(BINDIR)/xcmap \ ++ $(DESTDIR)$(BINDIR)/xvpictoppm ++# ++ $(MKDIR) $(DESTDIR)$(MANDIR) ++ cp docs/xv.man $(DESTDIR)$(MANDIR)/xv.$(MANSUF) ++ cp docs/bggen.man $(DESTDIR)$(MANDIR)/bggen.$(MANSUF) ++ cp docs/xcmap.man $(DESTDIR)$(MANDIR)/xcmap.$(MANSUF) ++ cp docs/xvp2p.man $(DESTDIR)$(MANDIR)/xvpictoppm.$(MANSUF) ++ cp docs/vdcomp.man $(DESTDIR)$(MANDIR)/vdcomp.$(MANSUF) ++ chmod 644 $(DESTDIR)$(MANDIR)/xv.$(MANSUF) \ ++ $(DESTDIR)$(MANDIR)/bggen.$(MANSUF) \ ++ $(DESTDIR)$(MANDIR)/xcmap.$(MANSUF) \ ++ $(DESTDIR)$(MANDIR)/xvpictoppm.$(MANSUF) \ ++ $(DESTDIR)$(MANDIR)/vdcomp.$(MANSUF) ++# ++ $(MKDIR) $(DESTDIR)$(DOCDIR) # or $(DESTDIR)$(LIBDIR) ++ cp README.jumbo docs/xvdocs.pdf docs/xvdocs.ps $(DESTDIR)$(DOCDIR)/. ++ chmod 644 $(DESTDIR)$(DOCDIR)/README.jumbo \ ++ $(DESTDIR)$(DOCDIR)/xvdocs.pdf $(DESTDIR)$(DOCDIR)/xvdocs.ps ++# ++ #$(MKDIR) $(DESTDIR)$(SYSCONFDIR) ++ #cp xv_mgcsfx.sample $(DESTDIR)$(SYSCONFDIR)/xv_mgcsfx ++ #chmod 644 $(DESTDIR)$(SYSCONFDIR)/xv_mgcsfx ++ tar: +# tar only local jpeg and tiff dirs, not user's or system's copies: @@ -499,7 +1106,7 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std xvtar: tar cvf xv.tar Makefile* Imakefile *.c *.h bits -@@ -257,26 +289,26 @@ +@@ -257,26 +440,28 @@ ################# bitmap dependencies #################### @@ -510,15 +1117,19 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std xvbrowse.o: bits/br_file bits/br_dir bits/br_exe bits/br_chr bits/br_blk -xvbrowse.o: bits/br_sock bits/br_fifo bits/br_error bits/br_unknown +-xvbrowse.o: bits/br_cmpres bits/br_gif bits/br_pm bits/br_pbm +xvbrowse.o: bits/br_sock bits/br_fifo bits/br_error # bits/br_unknown - xvbrowse.o: bits/br_cmpres bits/br_gif bits/br_pm bits/br_pbm ++xvbrowse.o: bits/br_cmpres bits/br_bzip2 bits/br_gif bits/br_pm bits/br_pbm xvbrowse.o: bits/br_sunras bits/br_bmp bits/br_utah bits/br_iris -xvbrowse.o: bits/br_pcx bits/br_jfif bits/br_tiff bits/br_pds -+xvbrowse.o: bits/br_pcx bits/br_jfif bits/br_tiff bits/br_pds - xvbrowse.o: bits/br_ps bits/br_iff bits/br_targa bits/br_xpm +-xvbrowse.o: bits/br_ps bits/br_iff bits/br_targa bits/br_xpm ++xvbrowse.o: bits/br_pcx bits/br_jfif bits/br_tiff bits/br_pds bits/br_pcd ++xvbrowse.o: bits/br_ps bits/br_iff bits/br_targa bits/br_xpm bits/br_xwd ++xvbrowse.o: bits/br_fits bits/br_png bits/br_zx bits/br_mag bits/br_maki ++xvbrowse.o: bits/br_pic bits/br_pi bits/br_pic2 bits/br_mgcsfx ++xvbrowse.o: bits/br_jp2 bits/br_jpc xvbrowse.o: bits/br_trash bits/fcurs bits/fccurs bits/fdcurs bits/fcursm -xvbrowse.o: bits/br_xwd -+xvbrowse.o: bits/br_xwd xvbutt.o: bits/cboard50 bits/rb_frame bits/rb_frame1 bits/rb_top xvbutt.o: bits/rb_bot bits/rb_dtop bits/rb_dbot bits/rb_body @@ -533,7 +1144,7 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std xvctrl.o: bits/uicon bits/oicon1 bits/oicon2 bits/icon xvctrl.o: bits/padimg bits/annot -@@ -285,13 +317,13 @@ +@@ -285,13 +470,13 @@ xvdflt.o: bits/logo_top bits/logo_bot bits/logo_out bits/xv_jhb xvdflt.o: bits/xv_cpyrt bits/xv_rev bits/xv_ver xvdflt.o: bits/xf_left bits/xf_right bits/font5x9.h @@ -549,400 +1160,9 @@ diff -ruN xv-3.10a/Makefile.std xv-3.10a-bugfixes/Makefile.std xvevent.o: bits/blur bits/blurm xvgam.o: bits/h_rotl bits/h_rotr bits/h_flip bits/h_sinc bits/h_sdec -diff -ruN xv-3.10a/README.jumbo xv-3.10a-bugfixes/README.jumbo ---- xv-3.10a/README.jumbo 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-bugfixes/README.jumbo 2005-04-10 19:55:23.000000000 -0700 -@@ -0,0 +1,387 @@ -+These are the latest versions of the XV jumbo patches I originally created -+in February 2000 (but never distributed) and eventually updated and released -+in May 2004, prompted by a discussion on LWN (http://lwn.net/Articles/76391/). -+Information about the patches, updates to the patches, and the patches -+themselves can all be found here: -+ -+ http://pobox.com/~newt/greg_xv.html -+ http://freshmeat.net/projects/xvjumbopatches/ -+ -+(Use the "Subscribe to new releases" link on the latter page if you want to -+be notified of new versions automatically; trivial registration required.) -+ -+These two patches incorporate all of the fix- and enhancement-patches -+available from John's XV site (http://www.trilon.com/xv/downloads.html -+and ftp://ftp.trilon.com/pub/xv/patches/), plus a number of my own fixes -+and additions, plus quite a few from other people--though not all of the -+ones I'd intended to (sorry, SJT, AT, and JPD!) due to lack of time after -+dealing with the latest security issue (which I discovered, sigh). They're -+still not fully complete, and it's possible they never will be, but I do -+plan to continue working on them whenever the mood strikes--and I may even -+release them publicly on rare occasions. (At the current rate, it looks -+like once a year may be the best we can hope for...we'll see.) -+ -+Also be aware that several other people have had the same idea over the -+years. Ones I've found, more or less by accident, include: -+ -+ - Landon Curt "chongo" Noll (http://www.isthe.com/chongo/) -+ http://www.isthe.com/chongo/src/xv-patch/ -+ - Mark Ashley <mark@ibiblio.org> -+ http://www.ibiblio.org/pub/packages/solaris/sparc/html/xv.3.10a.p19.html -+ - Peter Jordan <pete@dc.seflin.org> -+ http://www.ibiblio.org/pub/Linux/apps/graphics/viewers/X/xv-3.10a.patch.* -+ - Uwe F. Mayer (http://www.tux.org/~mayer/) -+ http://www.tux.org/~mayer/linux/book/node311.html -+ - Kurt Wall <kwall@kurtwerks.com> -+ http://www.kurtwerks.com/software/xv.html -+ - Chisato Yamauchi (http://phe.phyas.aichi-edu.ac.jp/~cyamauch/index_en.html) -+ http://phe.phyas.aichi-edu.ac.jp/~cyamauch/xv.html -+ - Daisuke Yabuki <dxy@optix.org> -+ http://www.optix.org/~dxy/solaris/xv/ -+ - Pekoe (http://pekoe.lair.net/) -+ http://pekoe.lair.net/diary/xv.html -+ - FreeBSD FreshPorts -+ http://www.freshports.org/graphics/xv/ -+ - <sudakyo@fat.coara.or.jp> -+ http://www.coara.or.jp/~sudakyo/XV_jp.html -+ -+I very much doubt that this is an exhaustive list. So far, most of the other -+patch-sets appear not to be quite as extensive or as up-to-date as my own, -+although the last three or four do include the [large] Japanese extension -+patches that I omitted--not because they're unworthy, but simply because I -+didn't find them until collisions between the two sets of patches had become -+a large problem. (Maybe for the next release... I'd intended to try for -+this release, but the security issues ended up taking almost all of my -+available time. And, to be honest, from my perspective, inclusion of the -+jp-extension patches is more for completeness' sake than personal interest, -+so their priority is fairly low.) -+ -+Below I summarize the component patches that are encompassed by my jumbo -+bugfixes and jumbo enhancements patches. Unfortunately, some of my own -+additions never saw the light of day as standalone patches, but considering -+the number of overlaps (collisions) already implicit in this list, it would -+have been difficult to accomplish even if I'd had the time. In any case, -+they're present in these jumbo patches but not chongo's, so those who _really_ -+care can "subtract" the two sets of patches to see what I did. -+ -+Here's a quick guide to the "third-party" credits in the lists below: -+ -+ AAC = Andrey A. Chernov [ache] -+ (http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-ab) -+ AD = Andreas Dilger (adilger@clusterfs.com) -+ AL = Alexander Lehmann (lehmann@usa.net) -+ AT = Anthony Thyssen (http://www.cit.gu.edu.au/~anthony/) -+ DAC = David A. Clunie (http://www.dclunie.com/xv-pcd.html) -+ EK = Egmont Koblinger (egmont@users.sourceforge.net) -+ GRR = Greg Roelofs (http://pobox.com/~newt/) -+ GV = Guido Vollbeding (http://sylvana.net/guido/) -+ JCE = John C. Elliott (http://www.seasip.demon.co.uk/ZX/zxdload.html) -+ JHB = John H. Bradley, of course (http://www.trilon.com/xv/) -+ JPD = Jean-Pierre Demailly (http://www-fourier.ujf-grenoble.fr/~demailly/) -+ JR = John Rochester (http://www.freebsd.org/cgi/query-pr.cgi?pr=2920) -+ (also http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-af, -ag) -+ JZ = Joe Zbiciak (http://spatula-city.org/~im14u2c/) -+ LCN = Landon Curt "chongo" Noll (http://www.isthe.com/chongo/) -+ PBJ = Peter Jordan (http://www.ibiblio.org/pub/Linux/apps/graphics/viewers/X/) -+ PSV = Pawel S. Veselov (http://manticore.2y.net/wbmp.html) -+ SB = Sean Borman (http://www.nd.edu/~sborman/software/xvwheelmouse.html) -+ SJT = TenThumbs (tenthumbs@cybernex.net) -+ TA = Tim Adye (http://hepwww.rl.ac.uk/Adye/xv-psnewstyle.html) -+ -+Other credits are as listed on the XV Downloads page or in the respective -+patches (e.g., the jp-extension patches or within the PNG patch). -+ -+Finally, please note that these patches have not been blessed by John Bradley -+in any way (although I copied him on the May 2004 announcement--no response). -+Nor have I personally tested every change and feature! (See the BIG SCARY -+WARNING below for further caveats.) In other words, they're both completely -+unofficial and completely unguaranteed. But they seem to work for me. (And -+when they don't, I fix 'em. Eventually, anyway... ;-) ) -+ -+One further "final" note: this may well be the last release to include -+separate fix- and enhancements-patches. It is too much of a timesink to -+maintain parallel trees--not to mention parallel makefiles (generic/public -+vs. local/personal, old vs. new libjpeg/libtiff) and xv.h (unregistered/ -+public vs. registered/personal), particularly when some fixes come about -+while working on an enhancement. Henceforth--assuming, of course, that -+there _is_ a "henceforth"--I expect to merge the patches into a single -+jumbo patch. (Alternatively, I may simply freeze the current fix-patch -+and continue to evolve only the enhancements patch; in particular, new -+fixes would appear only in it. Either approach would be simple enough; -+feedback as to which would be preferable is welcomed.) -+ -+GRR 20050410 -+ -+ -+How to build -+------------ -+ -+The following assumes you, the user, already have the libtiff,[1] -+libjpeg,[2] libpng,[3] and zlib[4] libraries downloaded, patched (if -+necessary), compiled, and installed, not to mention a C compiler and -+the bzip2,[5] tar,[6] patch,[7] and make[8] utilities. You should also -+have downloaded the original XV 3.10a source distribution from the XV -+Downloads page[9] and be able to edit its Makefile and config.h files -+as indicated in the INSTALL file. Finally, you should know what a -+Unix(-style) command line is, where to find one, and how to wield it -+with abandon (or at least with adult supervision)--and preferably not -+as the root user until the make install step. (A filesystem is a -+terrible thing to waste.) -+ -+ [1] http://www.remotesensing.org/libtiff/ -+ [2] http://www.ijg.org/ -+ [3] http://www.libpng.org/pub/png/libpng.html -+ [4] http://www.zlib.net/ -+ [5] http://sources.redhat.com/bzip2/ -+ [6] http://www.gnu.org/directory/devel/specific/tar.html -+ [7] http://www.gnu.org/directory/devel/specific/patch.html -+ [8] http://www.gnu.org/directory/devel/specific/make.html -+ [9] http://www.trilon.com/xv/downloads.html#src-distrib -+ -++-------------------------------------------------------------------------+ -+| | -+| BIG SCARY WARNING | -+| | -+| These patches work for Greg (and parts of them apparently work for | -+| various other people), and so far Greg's CPU still computes and his | -+| hard disks haven't been wiped. But there's no guarantee that that | -+| will be the case for you! In particular, not every incorporated patch | -+| has been explicitly tested, nor has every possible subcase of the | -+| explicitly tested subset. (Read that again; it's grammatical.) Nor are | -+| these patches officially blessed by John Bradley in any way. In other | -+| words, if you use these patches, you do so at your own risk. (Greg | -+| doesn't believe there are any serious problems remaining, but then, | -+| what programmer ever does? Bugs happen.) | -+| | -++-------------------------------------------------------------------------+ -+ -+Assuming you have the prerequisites out of the way and aren't scared -+off by the Big Scary Warning, here's the build procedure: -+ -+ bzip2 -dc xv-3.10a-jumbo-patches-20050410.tar.bz2 | tar xvf - -+ (or tar xvzf xv-3.10a-jumbo-patches-20050410.tar.gz) -+ -+ tar xvzf xv-3.10a.tar.gz -+ -+ cd xv-3.10a -+ -+ patch -p1 < ../xv-3.10a-jumbo-fix-patch-20050410.txt -+ -+ [optional] patch -p1 < ../xv-3.10a-jumbo-enh-patch-20050410.txt -+ -+ edit Makefile and config.h as directed in INSTALL file (in particular, -+ ensure paths to external libraries and header files are correct) -+ -+ make -+ -+ ./xv your_favorite_image your_other_favorite_image etc. -+ -+If everything seems to be working to your satisfaction, go ahead and install: -+ -+ make -n install (and double-check that things will be installed -+ where you want them to be) -+ -+ become root if necessary (e.g., type su) -+ -+ make install -+ -+That wasn't so hard, was it? -+ -+ -+Summary of incorporated and unincorporated patches -+-------------------------------------------------- -+ -+fixes ((*) = listed on XV Downloads page, (f) = on ftp site only): -+ -+20040516: -+ - grabpatch (*) [obsoleted by new-xvgrab.c below] -+ - vispatch (*) -+ - mp-tiff-patch (*) [technically an enhancement, but JHB says...] -+ - longname.patch (*) [*SECURITY*] -+ - xpm.patch (*) -+ - deepcolor.patch (*) [slightly modified for language conformance] -+ - gifpatch (*) -+ - exceed_grab.patch (*) -+ - xv-redhat6-readme.txt (*) [slightly modified for portability] -+ - beos.patch (*) [modified for portability] -+ - croppad.patch (f) -+ - epsfpatch (f) -+ - tiff1200.patch (*) -+ - gssafer.patch (*) [*SECURITY*] -+ - new-xvgrab.c (f) [includes grabpatch but not exceed_grab.patch] -+ - xcmap.diff (AD) [part of xv-3.10a-png-1.2d.tar.gz] -+ - fixes for huge number gcc -Wall warnings--including two bugs (GRR) -+ - fix for cleandir script when no makefile exists (GRR) -+ - *SECURITY* fix for gets() in vdcomp.c (GRR, LCN vdcomp-security.patch) -+ - *SECURITY* fix for getwd() on Linux (GRR, LCN Linux-compile.patch) -+ - fix for "no fuss" Linux compiles (LCN Linux-compile.patch) -+ - partial *SECURITY* fix for mktemp() in xv.c and xvdir.c (GRR) -+ (remaining instances in xv.c (2), xvimage.c, xvfits.c, xvpds.c, xvps.c, and -+ possibly xvtiff.c--most involve system()) -+ - freebsd-vdcomp-newline.patch (AAC) -+ - xv-3.10a.patch.linux (PBJ) [/bin/sh versions of cleandir, RANLIB.sh only] -+ - removed trailing white space (GRR) [purely cosmetic] -+20050410: -+ - fix for YCbCr oversaturated-green bug(s) in TIFF decoder (GRR) -+ - provisional fix for contiguous tiled TIFFs with bottom-* orientation (GRR) -+ - fixes for gcc 3.3 -Wall warnings (GRR) -+ - fix for incorrect 16/24-bit display of xwd dumps (SJT) -+ - *SECURITY* fix for multiple input-validation bugs (OpenBSD/SuSE, Gentoo, GRR) -+ (this also completes the partial mktemp() security fix listed above) -+ - fix for (probable) 24-bit endianness bug in fixpix code (GRR) -+ -+ -+enhancements ((*) = listed on XV Downloads page, (<who>) = third-party): -+ -+20040516: -+ - xv-3.10a.JPEG-patch (*) -+ (xv-3.10a.JPEG-patch.old differs only in ftp site listed in comments at top) -+ - xv-3.10a.TIFF-patch (*) -+ - xv-3.10a-png-1.2d.tar.gz (AL, AD) (*) -+ (xvjpeg.diff and xvtiff.diff ignored; xcmap.diff included in fixes) -+ - xvpng-1.2d-fix3.patch (GRR, SJT) (*) -+ - pdf.patch (*) -+ - windowid.patch + windowid.patch.readme (*) -+ - bmp32.patch (*) -+ - fixpix-20000610.tar.gz (GV) -+ (identical to 19961127 version except for README updates and new Win32 file) -+ [modified to be runtime-selectable via -/+fixpix option] -+ - browse-remember.patch (JZ) -+ - faster-smooth.patch (JZ) -+ - PAM support (GRR) -+ - PNG/GIF -ibg ("image background") transparency option (GRR) -+ (does not yet support TIFF, XPM or TGA) -+ - VersionInfo* in help screen (GRR) -+ - minor grammar/spelling fixes (GRR) -+ - floating-point support for -wait when USE_TICKS enabled (GRR) -+ - wheelmouse.patch (SB) -+ - freebsd-gravity-hints-patch (JR) -+ - xv-zx.patch (JCE) -+ - xv3.10a.wapbmp.patch (PSV) -+ - xv-3.10a-pcd.patch.20010708 (DAC) -+ - jp-ext-bzip2-1.1.patch -+ (from ftp://ftp.freebsd.org/pub/FreeBSD/ports/local-distfiles/shige/xv/) -+20050410: -+ - boosted maximum number of files from 4096 to 32768 (GRR) -+ (note that OS kernel limits may also apply; for example, in Linux see -+ MAX_ARG_PAGES in linux-<version>/include/linux/binfmts.h) -+ - xv-3.10a-bmp16.patch -+ (from http://www.coara.or.jp/~sudakyo/XV_jp.html) -+ - final-image delay (e.g., "-wait 0.2,3" : pause 3 secs on final image) (GRR) -+ - xv-numpad.patch (EK) -+ - xv-delete-is-not-backspace.patch (EK) -+ - made browser window (schnauzer) and icons configurable (AT, GRR) -+ -+ -+not (yet?) included: -+ -+ - others from http://www.coara.or.jp/~sudakyo/XV_jp.html (some are duplicates): -+ -rw-r--r-- 4644 Mar 11 2004 xv-3.10a-directory.patch -+ -rw-r--r-- 462 Mar 11 2004 xv-3.10a-dirwkey.patch -+ -rw-r--r-- 688 Mar 11 2004 xv-3.10a-docdir.patch -+ -rw-r--r-- 11952 Mar 11 2004 xv-3.10a-download-test0.patch -+ -rw-r--r-- 41786 Mar 11 2004 xv-3.10a-download-test1.patch -+ -rw-r--r-- 42397 Mar 11 2004 xv-3.10a-download-test2.patch -+ -rw-r--r-- 47679 Mar 11 2004 xv-3.10a-download-test3.patch -+ -rw-r--r-- 52745 Mar 11 2004 xv-3.10a-download-test4.patch -+ -rw-r--r-- 415 Mar 11 2004 xv-3.10a-formatstr.patch -+ -rw-r--r-- 3423 Apr 24 2004 xv-3.10a-keyzoom.patch -+ -rw-r--r-- 1461 Mar 11 2004 xv-3.10a-locale-linux.patch -+ -rw-r--r-- 12387 Mar 15 2004 xv-3.10a-menubutton.patch -+ -rw-r--r-- 1178 Apr 24 2004 xv-3.10a-noblink.patch -+ -rw-r--r-- 484 Mar 11 2004 xv-3.10a-printkey.patch -+ -rw-r--r-- 57092 Jul 9 2004 xv-3.10a-resolution.patch -+ -rw-r--r-- 4645 Apr 24 2004 xv-3.10a-selall.patch -+ -rw-r--r-- 360 Mar 11 2004 xv-3.10a-shortsleep.patch -+ -rw-r--r-- 702 Apr 24 2004 xv-3.10a-showlongname.patch -+ -rw-r--r-- 1205 Apr 24 2004 xv-3.10a-staytoppdir.patch -+ -rw-r--r-- 1591 Mar 15 2004 xv-3.10a-sysconfdir.patch -+ -rw-r--r-- 4228 Apr 24 2004 xv-3.10a-wheelmouse.patch -+ -rw-r--r-- 744 Apr 24 2004 xv-3.10a-xvbutt_wait.patch -+ -rw-r--r-- 712 Mar 11 2004 xv-3.10a-xvexecpath.patch -+ -rw-r--r-- 3757 Jul 9 2004 xv-3.10a-xvscrl_button2.patch -+ -rw-r--r-- 1494 Jul 9 2004 xv-3.10a-xvscrl_wait.patch -+ -rw-r--r-- 19352 Jul 9 2004 xv-3.10a-xvzoom.patch -+ -rw-r--r-- 1827 Apr 24 2004 xv-3.10a-zeroquit.patch -+ -+ - xv310a-jp-extension-rev5.3.3.tar.gz [extensive] -+ - xv-3.10a-jp-extension-5.3.3-png-1.2d.patch [PNG patch relative to jp-ext] -+ - xv-3.10a+jp-extension-rev5.3.3+FLmask.v2.1+png+misc.patch [??] -+ -+ - xv-grab-imake-hips.patch (JPD) [HIPS format, -startgrab option] -+ - xv-psnewstyle.patch (TA) [coming later in 2005?] -+ - xv-3.10a.patch.linux (PBJ) [maybe use vdcomp.c changes?] -+ - xvxpm-anthony-thyssen.c (AT) ["slate grey" bug already gone?] -+ -+ - stuff in xv/unsupt: -+ -rw-r--r-- 30527 Dec 22 1994 FITS.rite -+ -rw-r--r-- 49152 Dec 22 1994 FITS.tar -+ -rw-r--r-- 3753 Dec 22 1994 G3.patch1 -+ -rw-r--r-- 24576 Dec 22 1994 G3.tar -+ -rw-r--r-- 1098 Dec 22 1994 INFO.cgm -+ -rw-r--r-- 1941 Dec 22 1994 README -+ -rwxr-xr-x 1059 Dec 22 1994 getweather -+ -rwxr-xr-x 2186 Dec 22 1994 getweather.ksh -+ -rw-r--r-- 856 Dec 22 1994 twm.fix -+ -rw-r--r-- 844 Dec 22 1994 vargs.c -+ -rw-r--r-- 47626 Dec 22 1994 vis -+ -rw-r--r-- 21097 Dec 22 1994 xscm -+ -+ -+ -+not finished (and/or even started ;-) ): -+ -+ - fix xvpng.c not to use direct struct access -+ - fix for never-ending pile of SLOW popups when viewing TIFFs with unknown tags -+ (or truncated/corrupted images) -+ - fix for minor .Z inefficiency in xv.c ("FIXME") -+ - fix for filename entry-field mouse/cursor bogosity -+ (want at least positioning to work; preferably also select/cut/paste) -+ - fix for spacebar-for-next-image getting stuck at first text file -+ - fix for .ppm.gz "disk leak" [can't reproduce...already fixed?] -+ (maybe occurs only if filesystem is already nearly full? bad .gz?) -+ -+ - transparency support for TIFF, XPM and TGA images -+ - support for tiled background image (with transparent foreground image) -+ - MNG/JNG support -+ -+ -+ChangeLog -+--------- -+ -+ 20000220 -+ original pair of jumbo patches, comprising perhaps 16 fix-patches and a -+ dozen enhancement-patches; never publicly released -+ -+ 20040516 -+ first public release, incorporating 25 fix-patches and 21 enhancement- -+ patches -+ -+ 20040523 -+ minor fix to xvctrl.c to support registered versions (GRR warnings-patch -+ was slightly overzealous); switched to tarball packaging -+ -+ 20040531 -+ fixed undefined CLK_TCK with gcc -ansi (enh/USE_TICKS option); made -+ libjpeg, libtiff, libpng and zlib sections of makefile more consistent -+ (enh); -+ -+ 20040606 -+ added freshmeat link, build instructions, and changelog to jumbo README -+ (this file) -+ -+ 20050213 -+ increased max number of files from 4096 to 32768 (enh) -+ -+ 20050320-20050410 -+ fixed two very long-standing YCbCr bugs in TIFF decoder (fix); -+ provisionally fixed bug in TIFF decoder for contiguous tiled TIFFs with -+ bottom-* orientation (fix/USE_TILED_TIFF_BOTLEFT_FIX option); fixed new -+ gcc 3.3 warnings (fix); fixed incorrect 16/24-bit display of xwd dumps -+ (fix); fixed multiple input-validation bugs (potential heap overflows) -+ and mktemp() dependencies (*SECURITY* fixes: CAN-2004-1725, CAN-2004- -+ 1726, CAN-2005-0665, CERT VU#622622, and others); added support for 16- -+ and 32-bit BMPs using bitfields "compression" (enh); fixed probable byte- -+ sex bug in 24-bit FixPix display code (enh/USE_24BIT_ENDIAN_FIX option); -+ fixed numerical-keypad NumLock behavior and delete-key behavior in file- -+ load/save window (enh); made schnauzer window and icons configurable (enh) -diff -ruN xv-3.10a/bggen.c xv-3.10a-bugfixes/bggen.c +diff -ru xv-3.10a/bggen.c xv-3.10a-enhancements/bggen.c --- xv-3.10a/bggen.c 1994-12-22 14:34:41.000000000 -0800 -+++ xv-3.10a-bugfixes/bggen.c 2004-05-16 17:50:52.000000000 -0700 ++++ xv-3.10a-enhancements/bggen.c 2005-04-17 14:04:22.000000000 -0700 @@ -18,6 +18,11 @@ #include <stdio.h> #include <math.h> @@ -955,6 +1175,15 @@ diff -ruN xv-3.10a/bggen.c xv-3.10a-bugfixes/bggen.c #ifndef M_PI # define M_PI 3.1415926535897932385 #endif +@@ -29,7 +34,7 @@ + #define MAXCOLS 128 + + /* some VMS thing... */ +-#ifdef vax11c ++#if defined(vax11c) || (defined(__sony_news) && (defined(bsd43) || defined(__bsd43) || defined(SYSTYPE_BSD) || defined(__SYSTYPE_BSD))) + #include <ctype.h> + #endif + @@ -46,8 +51,8 @@ typedef unsigned char byte; @@ -1262,9 +1491,22 @@ diff -ruN xv-3.10a/bggen.c xv-3.10a-bugfixes/bggen.c for (y=0; y<h; y++) { if (doascii) { for (x=0; x<w; x++, pic+=3) -diff -ruN xv-3.10a/bits/icon xv-3.10a-bugfixes/bits/icon +diff -ru xv-3.10a/bits/br_targa xv-3.10a-enhancements/bits/br_targa +--- xv-3.10a/bits/br_targa 1994-12-22 14:35:30.000000000 -0800 ++++ xv-3.10a-enhancements/bits/br_targa 2007-04-15 10:40:46.000000000 -0700 +@@ -1,6 +1,6 @@ +-#define br_targa_width 48 +-#define br_targa_height 48 +-static unsigned char br_targa_bits[] = { ++#define br_tga_width 48 ++#define br_tga_height 48 ++static unsigned char br_tga_bits[] = { + 0xe0, 0xff, 0xff, 0xff, 0x01, 0x00, 0x20, 0x00, 0x00, 0x00, 0x03, 0x00, + 0x20, 0x00, 0x00, 0x00, 0x05, 0x00, 0x20, 0x00, 0x00, 0x00, 0x09, 0x00, + 0x20, 0x00, 0x00, 0x00, 0x11, 0x00, 0x20, 0x00, 0x00, 0x00, 0x21, 0x00, +diff -ru xv-3.10a/bits/icon xv-3.10a-enhancements/bits/icon --- xv-3.10a/bits/icon 1994-12-22 14:35:28.000000000 -0800 -+++ xv-3.10a-bugfixes/bits/icon 2004-04-28 00:53:10.000000000 -0700 ++++ xv-3.10a-enhancements/bits/icon 2004-04-28 08:00:16.000000000 -0700 @@ -1,5 +1,6 @@ #define icon_width 40 #define icon_height 32 @@ -1277,9 +1519,9 @@ diff -ruN xv-3.10a/bits/icon xv-3.10a-bugfixes/bits/icon 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +#endif -diff -ruN xv-3.10a/cleandir xv-3.10a-bugfixes/cleandir +diff -ru xv-3.10a/cleandir xv-3.10a-enhancements/cleandir --- xv-3.10a/cleandir 1994-12-22 14:34:50.000000000 -0800 -+++ xv-3.10a-bugfixes/cleandir 2004-05-10 23:19:16.000000000 -0700 ++++ xv-3.10a-enhancements/cleandir 2004-05-10 23:19:16.000000000 -0700 @@ -1,9 +1,13 @@ -#!/bin/csh -f +#!/bin/sh -f @@ -1300,32 +1542,80 @@ diff -ruN xv-3.10a/cleandir xv-3.10a-bugfixes/cleandir +# echo "no makefile found; NOT cleaning '$1' subdirectory" + fi +fi -diff -ruN xv-3.10a/config.h xv-3.10a-bugfixes/config.h +diff -ru xv-3.10a/config.h xv-3.10a-enhancements/config.h --- xv-3.10a/config.h 1995-01-05 10:49:21.000000000 -0800 -+++ xv-3.10a-bugfixes/config.h 2005-03-21 23:21:31.000000000 -0800 -@@ -8,9 +8,9 @@ ++++ xv-3.10a-enhancements/config.h 2007-05-14 08:51:10.000000000 -0700 +@@ -6,25 +6,42 @@ + /*************************************************************************** + * GZIP'd file support * - * if you have the gnu uncompression utility 'gunzip', XV can use it to - * automatically 'unzip' any gzip'd files. To enable this feature, +- * if you have the gnu uncompression utility 'gunzip', XV can use it to +- * automatically 'unzip' any gzip'd files. To enable this feature, - * change 'undef' to 'define' in the following line. Needless to say, if -+ * change 'undef' to 'define' in the following line. Needless to say, if - * your gunzip is installed elsewhere on your machine, change the 'GUNZIP' +- * your gunzip is installed elsewhere on your machine, change the 'GUNZIP' - * definition appropriately. (use 'which gunzip' to find if you have gunzip, -+ * definition appropriately. (use 'which gunzip' to find if you have gunzip, - * and where it lives) +- * and where it lives) ++ * if you have the GNU uncompression utility 'gunzip' (or 'gzip' itself, ++ * which is just a link to gunzip), XV can use it to automatically 'unzip' ++ * any gzip'd files. To enable this feature, change 'undef' to 'define' in ++ * the following line. Needless to say, if your gunzip is installed elsewhere ++ * on your machine, change the 'GUNZIP' definition appropriately. (use ++ * 'which gunzip' to find if you have gunzip, and where it lives; ditto for ++ * gzip) */ - #undef USE_GUNZIP -@@ -19,7 +19,8 @@ +-#undef USE_GUNZIP ++#define USE_GUNZIP + + #ifdef USE_GUNZIP # ifdef VMS # define GUNZIP "UNCOMPRESS" # else -# define GUNZIP "/usr/local/bin/gunzip -q" -+/* define GUNZIP "/usr/local/bin/gunzip -q" */ -+# define GUNZIP "/usr/bin/gzip -dq" /* more portable */ ++# define GUNZIP "gzip -dq" # endif #endif -@@ -70,18 +71,18 @@ + + /*************************************************************************** ++ * BZIP2'd file support ++ * ++ * if you have the uncompression utility 'bunzip2' (or 'bzip2' itself, which ++ * is just a link to bunzip2), XV can use it to automatically 'unzip' any ++ * bzip2'd files. To enable this feature, change 'undef' to 'define' in the ++ * following line (if not already done). Use 'which bunzip2' or 'which bzip2' ++ * to find if you have bzip2/bunzip2, and where it lives. ++ */ ++#define USE_BUNZIP2 ++ ++#ifdef USE_BUNZIP2 ++# define BUNZIP2 "bzip2 -d" /* should this include the full path? */ ++#endif ++ ++ ++/*************************************************************************** + * compress'd file support + * + * if you have GUNZIP defined above, just ignore this, as 'gunzip' can +@@ -37,9 +54,16 @@ + */ + #define UNCOMPRESS "/usr/ucb/uncompress" + +-#if defined(hpux) || defined(SVR4) || defined(__386BSD__) ++#if defined(hpux) || defined(SVR4) || \ ++ defined(__386BSD__) || defined(__FreeBSD__) || defined(__NetBSD__) || \ ++ defined(__linux__) ++ /* ++ I want to use BSD macro for checking if this OS is *BSD or not, ++ but the macro is defined in <sys/parm.h>, which I don't know all ++ machine has or not. ++ */ + # undef UNCOMPRESS +-# define UNCOMPRESS "/usr/bin/uncompress" ++# define UNCOMPRESS "uncompress" + #endif + + #if defined(sgi) +@@ -70,18 +94,18 @@ * PostScript file input support: * * if you have the 'ghostscript' package installed (version 2.6 or later), @@ -1349,16 +1639,29 @@ diff -ruN xv-3.10a/config.h xv-3.10a-bugfixes/config.h * just fix your 'gs' so it looks in the right places without being told...) * * GS_DEV is the file format that ghostscript will convert PS into. It -@@ -97,7 +98,7 @@ +@@ -89,6 +113,7 @@ + */ + + /* #define GS_PATH "/usr/local/bin/gs" */ ++#define GS_PATH "gs" + /* #define GS_LIB "." */ + /* #define GS_DEV "ppmraw" */ + +@@ -97,10 +122,10 @@ * 'old-style' XV logo image: * * XV now has a nifty, new logo image. The downside is that it increases - * the size of the 'xv' executable by 250K or so, and it's possible that +- * your compiler may choke while compiling 'xvdflt.c'. If you're compiler + * the size of the 'xv' executable by 250K or so, and it's possible that - * your compiler may choke while compiling 'xvdflt.c'. If you're compiler ++ * your compiler may choke while compiling 'xvdflt.c'. If your compiler * can't handle it, or you're running Linux on a system with minimal memory, - * change 'undef' to 'define' in the following line -@@ -108,8 +109,8 @@ +- * change 'undef' to 'define' in the following line ++ * change 'undef' to 'define' in the following line: + */ + + #undef USEOLDPIC +@@ -108,8 +133,8 @@ /*************************************************************************** * Backing Store: @@ -1369,9 +1672,228 @@ diff -ruN xv-3.10a/config.h xv-3.10a-bugfixes/config.h * several of its windows, which may help performance over a slow network * connection. However, it has been known to behave strangely (or crash) * on some X servers, so it's left here as an option. If you run into trouble -diff -ruN xv-3.10a/copyright.h xv-3.10a-bugfixes/copyright.h +@@ -119,3 +144,218 @@ + + #define BACKING_STORE + ++ ++/*************************************************************************** ++ * TIFF YCbCr-to-RGB conversion: ++ * ++ * Newer versions of libtiff can be compiled with libjpeg for JPEG-in-TIFF ++ * support, and according to Scott Marovich, "the IJG JPEG Library...sometimes ++ * seems to produce slightly more accurate results" (one known example: the ++ * 'quad-jpeg.tif' test image). In addition, libtiff can be compiled with ++ * "old JPEG" support, although its configure script will not enable that by ++ * default. Change 'define' and 'undef' in the following lines as you wish, ++ * but note that defining LIBTIFF_HAS_OLDJPEG_SUPPORT when such is _not_ the ++ * case will result in crashes when encountering old-JPEG TIFFs: ++ */ ++ ++#define USE_LIBJPEG_FOR_TIFF_YCbCr_RGB_CONVERSION ++#undef LIBTIFF_HAS_OLDJPEG_SUPPORT ++ ++ ++/*************************************************************************** ++ * PhotoCD/MAG/PIC/MAKI/Pi/PIC2/HIPS format Support: ++ * ++ * if, for whatever reason--say, security concerns--you don't want to ++ * include support for one or more of the PhotoCD, MAG/MAKI/Pi/PIC/PIC2 ++ * (Japanese), or HIPS (astronomical) image formats, change the relevant ++ * 'define' to 'undef' in the following lines. Conversely, if you *do* ++ * want them, change 'undef' to 'define' as appropriate. ++ */ ++ ++#define HAVE_PCD /* believed to be reasonably safe */ ++ ++#undef HAVE_MAG /* probable security issues */ ++#undef HAVE_MAKI /* probable security issues */ ++#undef HAVE_PI /* probable security issues */ ++#undef HAVE_PIC /* probable security issues */ ++#undef HAVE_PIC2 /* probable security issues */ ++ ++#undef HAVE_HIPS /* probable security issues */ ++ ++ ++/*************************************************************************** ++ * MacBinary file support: ++ * ++ * if you want XV to be able to handle ``MacBinary'' files (which have ++ * 128 byte info file header at the head), change 'undef' to 'define' ++ * in the following line. ++ */ ++ ++#undef MACBINARY ++ ++ ++/*************************************************************************** ++ * Auto Expand support: ++ * ++ * if you want to extract archived file automatically and regard it as ++ * a directory, change 'undef' to 'define' in the AUTO_EXPAND line. ++ * ++ * Virtual Thumbdir support: ++ * ++ * if you want Virtual directory based Thumbdir(It means that XV ++ * doesn't forget builded Icons still be quited even if the directory ++ * is read-only), change 'undef' to 'define' the VIRTUAL_TD line. ++ */ ++ ++#undef AUTO_EXPAND ++#undef VIRTUAL_TD ++ ++#if defined(VIRTUAL_TD) && !defined(AUTO_EXPAND) ++# undef VIRTUAL_TD ++#endif ++ ++ ++/*************************************************************************** ++ * Adjust the aspect ratio of Icons: ++ * ++ * if you want to adjust the aspect ratio of the icons in Visual ++ * Schnauzer, change 'undef' to 'define' in the following line. ++ */ ++ ++#undef VS_ADJUST ++ ++ ++/*************************************************************************** ++ * Restore original colormap: ++ * ++ * if you want to restore original colormap when icons in Visual ++ * Shunauzer is double-clicked, change 'undef' to 'define' in the ++ * following line. ++ */ ++ ++#undef VS_RESCMAP ++ ++ ++/*************************************************************************** ++ * TextViewer l10n support: ++ * ++ * if you want XV to show the text in Japanese on TextViewer, change ++ * 'undef' to 'define' in the following line. ++ */ ++ ++#undef TV_L10N ++ ++#ifdef TV_L10N ++/* ++ * if you want to change the default code-set used in case that XV ++ * fails to select correct code-set, uncomment the '#define ++ * LOCALE_DEFAULT' line and change the 'LOCALE_DEFAULT' definition ++ * appropriately. ++ * (0:ASCII, 1:EUC-j, 2:JIS, 3:MS Kanji) */ ++ ++/* # define LOCALE_DEFAULT 0 */ ++ ++/* ++ * Uncomment and edit the following lines, if your X Window System was ++ * not compiled with -DX_LOCALE and you failed to display the Japanese ++ * text in TextViewer. You don't have to write locale name of JIS code-set ++ * and Microsoft code-set, if your system doesn't support those code-sets. ++ */ ++ ++/* ++# define LOCALE_NAME_EUC "ja_JP.EUC" ++# define LOCALE_NAME_JIS "ja_JP.JIS" ++# define LOCALE_NAME_MSCODE "ja_JP.SJIS" ++*/ ++ ++/* ++ * if your system doesn't have the Japanese fonts in the sizes, ++ * Uncomment and edit the following font size entries. ++ */ ++ ++/* # define TV_FONTSIZE 14,16,24 */ ++ ++/* ++ * If you need, uncomment and modify the following font name. ++ */ ++ ++/* # define TV_FONTSET "-*-fixed-medium-r-normal--%d-*" */ ++#endif /* TV_L10N */ ++ ++ ++/*************************************************************************** ++ * User definable filter support: ++ * ++ * Use the filters as input and output method for load and save unsupported ++ * image format file. The filter command is recognized by definition of ++ * magic number or suffix in "~/.xv_mgcsfx" . ++ * To enable this feature, change 'undef' to 'define' in the following line. ++ */ ++#undef HAVE_MGCSFX ++ ++#ifdef HAVE_MGCSFX ++/* ++ * Support symbol 'auto' as <input image type> in startup file. This type ++ * cannot use pipe as input; it writes to a temporary file and recognizes ++ * the actual filetype by XV processing. ++ */ ++# define HAVE_MGCSFX_AUTO ++ ++/* ++ * The startup file of definition for MgcSfx. 'MGCSFX_SITE_RC' is read ++ * first and '~/MGCSFX_RC' is second. So same definitions in both files ++ * are overridden by '~/MGCSFX_RC' ++ * To define startup file, see the sample of startup file 'xv_mgcsfx.sample'. ++ */ ++# define MGCSFX_SITE_RC "xv_mgcsfx" ++# define MGCSFX_RC ".xv_mgcsfx" ++ ++/* ++ * If you want startup file to pass preprocessor in reading time, then ++ * change 'undef' to 'define' in the following line. ++ * ++ * WARNING : If you decide to use preprocessor, you must not write ++ * '# <comment>' style comment in startup file. Because, ++ * preprocessor can't recognize. */ ++# undef USE_MGCSFX_PREPROCESSOR ++ ++# ifdef USE_MGCSFX_PREPROCESSOR ++/* ++ * This is used like "system("MGCSFX_PREPROCESSOR MGCSFX_RC > tmp_name");", ++ * and read tmp_name instead of MGCSFX_RC. ++ */ ++# define MGCSFX_PREPROCESSOR "/usr/lib/cpp" ++/* # define MGCSFX_PREPROCESSOR "cc -E" */ ++ ++# endif /* USE_MGCSFX_PREPROCESSOR */ ++ ++/* ++ * Default string of command. If input command is required for undefined file, ++ * dialog is popuped with 'MGCSFX_DEFAULT_INPUT_COMMAND'. And, if output ++ * command is required in save dialog of MgcSfx, dialog is popuped with ++ * 'MGCSFX_DEFAULT_OUTPUT_COMMAND'. ++ * ++ * WARNING : Now, supported only 'PNM' image format, when command input is ++ * required. You should define filter which use 'PNM' image format ++ * as input or output. ++ */ ++# define MGCSFX_DEFAULT_INPUT_COMMAND "tifftopnm" ++# define MGCSFX_DEFAULT_OUTPUT_COMMAND "pnmtotiff" ++ ++#endif /* HAVE_MGCSFX */ ++ ++ ++/*************************************************************************** ++ * Multi-Lingual TextViewer ++ * ++ * if you want XV to show the text in multi-lingual on TextViewer, change ++ * 'undef' to 'define' in the following line. ++ */ ++ ++#undef TV_MULTILINGUAL ++ ++#define TV_DEFAULT_CODESET TV_EUC_JAPAN ++ ++#ifdef TV_MULTILINGUAL ++# undef TV_L10N ++#endif +diff -ru xv-3.10a/copyright.h xv-3.10a-enhancements/copyright.h --- xv-3.10a/copyright.h 1994-12-22 14:34:56.000000000 -0800 -+++ xv-3.10a-bugfixes/copyright.h 2004-05-16 17:53:11.000000000 -0700 ++++ xv-3.10a-enhancements/copyright.h 2007-05-20 21:35:34.000000000 -0700 @@ -1,11 +1,11 @@ /* Copyright Notice * ================ @@ -1427,10 +1949,140 @@ diff -ruN xv-3.10a/copyright.h xv-3.10a-bugfixes/copyright.h * Contact the author for more details. * * The author may be contacted via: -diff -ruN xv-3.10a/tiff/Makefile xv-3.10a-bugfixes/tiff/Makefile +@@ -56,3 +56,51 @@ + * The author may not be contacted by (voice) phone. Please don't try. + * + */ ++ ++/* ++ * Portions copyright 2000-2007 by Greg Roelofs and contributors: ++ * ++ * Andrey A. Chernov [ache] ++ * (http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-ab) ++ * Andreas Dilger (adilger clusterfs.com) ++ * Alexander Lehmann (lehmann usa.net) ++ * Alexey Spiridonov (http://www-math.mit.edu/~lesha/) ++ * Anthony Thyssen (http://www.cit.gu.edu.au/~anthony/) ++ * Bruno Rohee (http://bruno.rohee.com/) ++ * David A. Clunie (http://www.dclunie.com/xv-pcd.html) ++ * Erling A. Jacobsen (linuxcub email.dk) ++ * Egmont Koblinger (egmont users.sourceforge.net) ++ * Fabian Greffrath (fabian debian-unofficial.org) ++ * Greg Roelofs (http://pobox.com/~newt/greg_contact.html) ++ * Guido Vollbeding (http://sylvana.net/guido/) ++ * IKEMOTO Masahiro (ikeyan airlab.cs.ritsumei.ac.jp) ++ * John Cooper (john.cooper third-harmonic.com) ++ * John C. Elliott (http://www.seasip.demon.co.uk/ZX/zxdload.html) ++ * John D. Baker (http://mylinuxisp.com/~jdbaker/) ++ * Jörgen Grahn (jgrahn algonet.se) ++ * John H. Bradley, of course (http://www.trilon.com/xv/) ++ * Jean-Pierre Demailly (http://www-fourier.ujf-grenoble.fr/~demailly/) ++ * John Rochester (http://www.freebsd.org/cgi/query-pr.cgi?pr=2920) ++ * (also http://cvsweb.freebsd.org/ports/graphics/xv/files/patch-af, -ag) ++ * James Roberts Kirkpatrick (uwyo.edu) ++ * Joe Zbiciak (http://spatula-city.org/~im14u2c/) ++ * Kyoichiro Suda (http://www.coara.or.jp/~sudakyo/XV_jp.html) ++ * Landon Curt "chongo" Noll (http://www.isthe.com/chongo/) ++ * Larry Jones (lawrence.jones ugs.com) ++ * Peter Jordan (http://www.ibiblio.org/pub/Linux/apps/graphics/viewers/X/) ++ * Pawel S. Veselov (http://manticore.2y.net/wbmp.html) ++ * Ross Combs (rocombs cs.nmsu.edu) ++ * Robin Humble (http://www.cita.utoronto.ca/~rjh/) ++ * Sean Borman (http://www.nd.edu/~sborman/software/xvwheelmouse.html) ++ * TenThumbs (tenthumbs cybernex.net) ++ * Scott B. Marovich (formerly marovich hpl.hp.com) ++ * Tim Adye (http://hepwww.rl.ac.uk/Adye/xv-psnewstyle.html) ++ * Tim Ramsey (tar pobox.com) ++ * Tetsuya INOUE (tin329 chino.it.okayama-u.ac.jp) ++ * Tavis Ormandy (taviso gentoo.org) ++ * Werner Fink (http://www.suse.de/~werner/) ++ * ++ * Other credits are as listed on the XV Downloads page or in the respective ++ * patches (e.g., the jp-extension patches or within the PNG patch). ++ * ++ */ +diff -ru xv-3.10a/docs/bggen.man xv-3.10a-enhancements/docs/bggen.man +--- xv-3.10a/docs/bggen.man 1994-12-22 14:35:22.000000000 -0800 ++++ xv-3.10a-enhancements/docs/bggen.man 2007-04-22 17:32:11.000000000 -0700 +@@ -1,4 +1,4 @@ +-.TH bggen l ++.TH bggen 1 + .SH NAME + bggen \- generates colored backgrounds on X11 displays + .SH SYNTAX +diff -ru xv-3.10a/docs/xcmap.man xv-3.10a-enhancements/docs/xcmap.man +--- xv-3.10a/docs/xcmap.man 1994-12-22 14:35:23.000000000 -0800 ++++ xv-3.10a-enhancements/docs/xcmap.man 2007-04-22 17:32:31.000000000 -0700 +@@ -1,4 +1,4 @@ +-.TH xcmap 1X ++.TH xcmap 1 + .SH NAME + xcmap \- displays the default colormap on X11 displays + .SH SYNTAX +diff -ru xv-3.10a/docs/xv.man xv-3.10a-enhancements/docs/xv.man +--- xv-3.10a/docs/xv.man 1994-12-22 14:35:22.000000000 -0800 ++++ xv-3.10a-enhancements/docs/xv.man 2007-04-22 17:32:53.000000000 -0700 +@@ -1,4 +1,4 @@ +-.TH XV l "2 December 1994" "Rev. 3.10" ++.TH XV 1 "22 April 2007" "Rev. 3.10a-jumboFix+Enh" + .SH NAME + \fBxv\fP \- interactive image display for the X Window System + .SH SYNTAX +@@ -8,14 +8,17 @@ + .SH DESCRIPTION + The + .I xv +-program displays images in the GIF, JPEG, TIFF, +-PBM, PGM, PPM, X11 bitmap, Utah Raster Toolkit RLE, PDS/VICAR, Sun Rasterfile, +-BMP, PCX, IRIS RGB, XPM, Targa, XWD, possibly PostScript, and PM formats on +-workstations and terminals running the X Window System, Version 11. ++program displays images on workstations and terminals running the X Window ++System, Version 11. Supported image formats include ++PBM, PGM, PPM, X11 bitmap, XWD, XPM, Utah Raster Toolkit RLE, PDS/VICAR, ++FITS, Sun Rasterfile, GIF, PCX, Targa/TGA, BMP, WBMP, IRIS RGB, Spectrum ++SCREEN$, PM, and optionally PNG, JPEG, JPEG 2000, JP2, TIFF, PostScript, ++PDF, G3 fax, MAG, PIC, MAKI (640x400), PI, and PIC2. + .LP +-The documentation for XV is now distributed ++Aside from the usage screen (available by typing 'xv -help' at the command ++line), documentation for XV is now distributed + .I only +-as a PostScript file, as it has gotten enormous, ++as a PostScript (or PDF) file, as it has gotten enormous + and is no longer very well suited to the 'man' page format. + Print a copy of the (100-ish page) manual found in + .IR docs/xvdocs.ps . +@@ -26,9 +29,14 @@ + If you don't + .I have + the PostScript file, it is part of the standard XV distribution, the +-latest version of which can be obtained via anonymous ftp from ++latest version of which can be obtained from ++.IR http://www.trilon.com/xv/ ++or via anonymous ftp from + .IR ftp.cis.upenn.edu +-in the directory pub/xv ++in the directory pub/xv . ++.PP ++This version has been patched with the XV Jumbo Patches, available from ++.IR http://pobox.com/~newt/greg_xv.html . + .PP + .SH AUTHOR +-John Bradley ++John Bradley (and many contributors) +diff -ru xv-3.10a/docs/xvp2p.man xv-3.10a-enhancements/docs/xvp2p.man +--- xv-3.10a/docs/xvp2p.man 1994-12-22 14:35:25.000000000 -0800 ++++ xv-3.10a-enhancements/docs/xvp2p.man 2007-04-22 17:33:23.000000000 -0700 +@@ -1,4 +1,4 @@ +-.TH xvpictoppm 1X ++.TH xvpictoppm 1 + .SH NAME + xvpictoppm \- converts XV 'thumbnail' files to standard PPM format + .SH SYNTAX +diff -ru xv-3.10a/tiff/Makefile xv-3.10a-enhancements/tiff/Makefile --- xv-3.10a/tiff/Makefile 1994-12-22 14:35:12.000000000 -0800 -+++ xv-3.10a-bugfixes/tiff/Makefile 2004-05-16 18:49:11.000000000 -0700 -@@ -30,8 +30,10 @@ ++++ xv-3.10a-enhancements/tiff/Makefile 2005-04-17 14:45:28.000000000 -0700 +@@ -30,13 +30,15 @@ # OF THIS SOFTWARE. # @@ -1443,6 +2095,12 @@ diff -ruN xv-3.10a/tiff/Makefile xv-3.10a-bugfixes/tiff/Makefile IPATH= -I. + COPTS= -O +-CFLAGS= ${COPTS} ${IPATH} ++CFLAGS= ${COPTS} ${IPATH} -D_BSD_SOURCE + + INCS= tiff.h tiffio.h + @@ -60,6 +62,7 @@ ${ALL}: ${OBJS} @@ -1451,9 +2109,9 @@ diff -ruN xv-3.10a/tiff/Makefile xv-3.10a-bugfixes/tiff/Makefile ${RANLIB} libtiff.a ${OBJS}: tiffio.h tiff.h tiffcomp.h tiffiop.h tiffconf.h -diff -ruN xv-3.10a/tiff/Makefile.std xv-3.10a-bugfixes/tiff/Makefile.std +diff -ru xv-3.10a/tiff/Makefile.std xv-3.10a-enhancements/tiff/Makefile.std --- xv-3.10a/tiff/Makefile.std 1994-12-22 14:35:16.000000000 -0800 -+++ xv-3.10a-bugfixes/tiff/Makefile.std 2004-05-16 18:50:39.000000000 -0700 ++++ xv-3.10a-enhancements/tiff/Makefile.std 2004-05-16 18:50:39.000000000 -0700 @@ -30,8 +30,10 @@ # OF THIS SOFTWARE. # @@ -1475,35 +2133,9 @@ diff -ruN xv-3.10a/tiff/Makefile.std xv-3.10a-bugfixes/tiff/Makefile.std ${RANLIB} libtiff.a ${OBJS}: tiffio.h tiff.h tiffcomp.h tiffiop.h tiffconf.h -diff -ruN xv-3.10a/tiff/RANLIB.sh xv-3.10a-bugfixes/tiff/RANLIB.sh ---- xv-3.10a/tiff/RANLIB.sh 1969-12-31 16:00:00.000000000 -0800 -+++ xv-3.10a-bugfixes/tiff/RANLIB.sh 2004-05-10 23:31:38.000000000 -0700 -@@ -0,0 +1,22 @@ -+#!/bin/sh -f -+# -+# tests to see if the program 'ranlib' exists. If it does, runs ranlib on -+# the first argument (a library name). Otherwise, does nothing, and returns -+# -+# written by John Bradley for the XV 3.00 release -+# thanks to John Hagan for shell-script hackery -+# -+ -+echo "executing 'ranlib $1'..." -+ -+# Is there a ranlib? Let's try and then suffer the consequences... -+ranlib $1 >& /dev/null -+ -+if [ $? -ne 0 ]; then -+ echo "There doesn't seem to be a ranlib on this system..." -+ echo "Don't worry about it." -+fi -+ -+echo "" -+echo "" -+ -diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c +diff -ru xv-3.10a/vdcomp.c xv-3.10a-enhancements/vdcomp.c --- xv-3.10a/vdcomp.c 1994-12-22 14:34:47.000000000 -0800 -+++ xv-3.10a-bugfixes/vdcomp.c 2005-03-20 17:48:59.000000000 -0800 ++++ xv-3.10a-enhancements/vdcomp.c 2007-04-15 21:09:55.000000000 -0700 @@ -5,8 +5,8 @@ /* Decompresses images using Kris Becker's subroutine DECOMP.C */ /* which is included in this program in a shortened version. */ @@ -1515,18 +2147,64 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c /* labels, image histogram, engineering table, line header table */ /* and an image with PDS, FITS, VICAR or no labels. If used on */ /* a non-byte-swapped machine the image histogram is un-swapped. */ -@@ -108,7 +108,9 @@ - !defined(bsd43) && \ - !defined(aux) && \ - !defined(__bsdi__) && \ +@@ -96,40 +96,54 @@ + #include <stdio.h> + #include <stdlib.h> + +-/* include a malloc.h, of some sort... */ +-#ifndef VMS /* VMS hates multi-line '#if's */ +-# if !defined(ibm032) && \ +- !defined(__convex__) && \ +- !(defined(vax) && !defined(ultrix)) && \ +- !defined(mips) && \ +- !defined(apollo) && \ +- !defined(pyr) && \ +- !defined(__UMAXV__) && \ +- !defined(bsd43) && \ +- !defined(aux) && \ +- !defined(__bsdi__) && \ - !defined(sequent) -+ !defined(sequent) && \ -+ !defined(__FreeBSD__) && \ -+ !defined(__OpenBSD__) +- +-# if defined(hp300) || defined(hp800) || defined(NeXT) +-# include <sys/malloc.h> /* it's in 'sys' on HPs and NeXT */ +-# else +-# include <malloc.h> +-# endif +-# endif ++/* include a malloc.h of some sort (if needed...most systems use stdlib.h) */ ++#ifndef VMS /* VMS hates multi-line "#if"s */ ++ /* ++ * I want to use BSD macro for checking if this OS is *BSD or not, ++ * but the macro is defined in <sys/parm.h>, which I don't know all ++ * machine has or not. ++ */ ++# if !defined(ibm032) && \ ++ !defined(__convex__) && \ ++ !(defined(vax) && !defined(ultrix)) && \ ++ !defined(mips) && \ ++ !defined(apollo) && \ ++ !defined(pyr) && \ ++ !defined(sequent) && \ ++ !defined(__UMAXV__) && \ ++ !defined(aux) && \ ++ !defined(bsd43) && \ ++ !defined(__bsd43) && \ ++ !defined(__bsdi__) && \ ++ !defined(__386BSD__) && \ ++ !defined(__FreeBSD__) && \ ++ !defined(__OpenBSD__) && \ ++ !defined(__NetBSD__) && \ ++ !defined(__DARWIN__) ++ ++# if defined(hp300) || defined(hp800) || defined(NeXT) ++# include <sys/malloc.h> /* it's in "sys" on HPs and NeXT */ ++# else ++# include <malloc.h> /* FIXME: should explicitly list systems that NEED this, not everyone that doesn't */ ++# endif ++ ++# endif /* !most modern systems */ + #endif /* !VMS */ - # if defined(hp300) || defined(hp800) || defined(NeXT) - # include <sys/malloc.h> /* it's in 'sys' on HPs and NeXT */ -@@ -121,15 +123,17 @@ #include <X11/Xos.h> @@ -1534,24 +2212,41 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c -#define FALSE 0 +#define TRUE 1 +#define FALSE 0 ++ ++#define NAMELEN 1024 /* inname and outname sizes */ - /* pc i/o defines */ -#define O_BINARY 0x8000 /* file mode is binary */ -+#define NAMELEN 1024 /* inname and outname sizes */ ++ /* PC I/O defines */ ++#define O_BINARY 0x8000 /* file mode is binary */ - /* vax i/o defines */ -#define RECORD_TYPE "rfm=fix" /* VAX fixed length output */ -#define CTX "ctx=bin" /* no translation of \n */ -+ /* PC I/O defines */ -+#define O_BINARY 0x8000 /* file mode is binary */ -+ + /* VAX/VMS I/O defines */ +#define RECORD_TYPE "rfm=fix" /* VAX/VMS fixed-length output */ +#define CTX "ctx=bin" /* no translation of \n */ #define FOP "fop=cif,sup" /* file processing ops */ typedef struct leaf { struct leaf *right; -@@ -176,7 +180,7 @@ +@@ -142,9 +156,9 @@ + once the tree is created by the accompanying routine huff_tree. + **************************************************************************/ + +- NODE *tree; ++static NODE *tree; + +-/* subroutine definitions */ ++/* subroutine definitions */ + + #undef PARM + #ifdef __STDC__ +@@ -172,11 +186,11 @@ + void free_tree PARM((int *)); + int free_node PARM((NODE *, int)); + +-/* global variables */ ++/* global variables */ int infile; FILE *outfile; @@ -1560,7 +2255,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c int output_format; int record_bytes, max_lines; int line_samples, fits_pad; -@@ -185,8 +189,8 @@ +@@ -185,8 +199,8 @@ /*************************************************/ int main(argc,argv) @@ -1571,7 +2266,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c { unsigned char ibuf[2048],obuf[2048]; unsigned char blank=32; -@@ -200,12 +204,12 @@ +@@ -200,12 +214,12 @@ /* */ /*********************************************************************/ @@ -1586,7 +2281,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c strncmp(argv[1],"HELP",(size_t) 4) == 0 || strncmp(argv[1],"?", (size_t) 1) == 0)) { fprintf(stderr, -@@ -214,18 +218,22 @@ +@@ -214,18 +228,22 @@ fprintf(stderr," infile - name of compressed image file. \n"); fprintf(stderr," outfile - name of uncompressed output file.\n"); fprintf(stderr," output format - selected from the following list:\n"); @@ -1618,7 +2313,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c } host = check_host(); -@@ -244,13 +252,13 @@ +@@ -244,13 +262,13 @@ case 4: no_labels(host); break; } @@ -1634,7 +2329,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c fits_pad = 1536; line_samples = 1204; } -@@ -394,12 +402,12 @@ +@@ -394,12 +412,12 @@ if (record_bytes == 1204) /* do checksum for viking */ for (i=0; i<record_bytes; i++) checksum += (int)obuf[i]; @@ -1649,7 +2344,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c /* print checksum for viking */ fprintf(stderr,"\n Image label checksum = %d computed checksum = %d\n", label_checksum,checksum); -@@ -425,33 +433,36 @@ +@@ -425,33 +443,36 @@ /*********************************************************************/ int get_files(host) @@ -1698,7 +2393,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c /* systems with standard comm programs (kermit, for example). */ /****************************************************************/ -@@ -459,9 +470,9 @@ +@@ -459,9 +480,9 @@ read(infile,&shortint, (size_t) 2); if (shortint > 0 && shortint < 80) { host = 4; /* change host to 4 */ @@ -1710,7 +2405,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c lseek(infile,(off_t) 0,0); /* reposition to beginning of file */ } } -@@ -474,13 +485,17 @@ +@@ -474,13 +495,17 @@ printf("\n 3. VICAR format."); printf("\n 4. Unlabelled binary array.\n"); printf("\n Enter format number:"); @@ -1730,7 +2425,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c } return(host); -@@ -495,68 +510,68 @@ +@@ -495,68 +520,68 @@ /*********************************************************************/ void open_files(host) @@ -1815,7 +2510,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c exit(1); } } -@@ -572,11 +587,11 @@ +@@ -572,11 +597,11 @@ /*********************************************************************/ void pds_labels(host) @@ -1830,7 +2525,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c total_bytes = 0; -@@ -613,11 +628,11 @@ +@@ -613,11 +638,11 @@ (size_t) 53,(size_t) 1,outfile); else fwrite("CCSD3ZF0000100000001NJPL3IF0PDS200000001 = SFDU_LABEL", @@ -1844,7 +2539,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c fprintf(outfile,"%c%c",cr,lf); fwrite("RECORD_TYPE = FIXED_LENGTH",(size_t) 47, (size_t) 1,outfile); -@@ -710,7 +725,7 @@ +@@ -710,7 +735,7 @@ } else { strcpy(ibuf+35,"60"); @@ -1853,7 +2548,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c } fwrite(ibuf,(size_t) length,(size_t) 1,outfile); -@@ -730,7 +745,7 @@ +@@ -730,7 +755,7 @@ } else if ((i = strncmp(ibuf," ENCODING",(size_t) 9)) == 0); @@ -1862,7 +2557,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c /*****************************************************************/ /* delete the encoding type label in the image object */ /*****************************************************************/ -@@ -787,10 +802,10 @@ +@@ -787,10 +812,10 @@ /*********************************************************************/ void fits_labels(host) @@ -1875,7 +2570,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c unsigned char cr=13,lf=10,blank=32; do { -@@ -799,7 +814,7 @@ +@@ -799,7 +824,7 @@ /*****************************************************************/ /* find the checksum and store in label_checksum */ /*****************************************************************/ @@ -1884,7 +2579,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c ibuf[length] = '\0'; label_checksum = atol(ibuf+35); } -@@ -842,7 +857,7 @@ +@@ -842,7 +867,7 @@ if (record_bytes == 836) strcpy(outstring,"NAXIS1 = 800"); @@ -1893,7 +2588,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c strcpy(outstring,"NAXIS1 = 1204"); strcat(outstring," "); -@@ -862,7 +877,7 @@ +@@ -862,7 +887,7 @@ strcpy(outstring,"END "); strcat(outstring," "); @@ -1902,7 +2597,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c fwrite(outstring,(size_t) 78,(size_t) 1,outfile); fprintf(outfile,"%c%c",cr,lf); total_bytes = total_bytes + 80; -@@ -871,6 +886,7 @@ +@@ -871,6 +896,7 @@ for (i=total_bytes; i<2880; i++) fputc(blank,outfile); } @@ -1910,7 +2605,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c /*********************************************************************/ /* */ /* subroutine vicar_labels - write vicar labels to output file */ -@@ -878,11 +894,10 @@ +@@ -878,11 +904,10 @@ /*********************************************************************/ void vicar_labels(host) @@ -1924,7 +2619,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c unsigned char cr=13,lf=10,blank=32; do { -@@ -890,7 +905,7 @@ +@@ -890,7 +915,7 @@ /*****************************************************************/ /* find the checksum and store in label_checksum */ /*****************************************************************/ @@ -1933,7 +2628,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c ibuf[length] = '\0'; label_checksum = atol(ibuf+35); } -@@ -950,10 +965,10 @@ +@@ -950,10 +975,10 @@ /*********************************************************************/ void no_labels(host) @@ -1947,7 +2642,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c do { length = read_var(ibuf,host); -@@ -961,7 +976,7 @@ +@@ -961,7 +986,7 @@ /*****************************************************************/ /* find the checksum and store in label_checksum */ /*****************************************************************/ @@ -1956,7 +2651,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c ibuf[length] = '\0'; label_checksum = atol(ibuf+35); } -@@ -984,15 +999,16 @@ +@@ -984,15 +1009,16 @@ open_files(&host); } @@ -1976,7 +2671,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c { int length,result,nlen; char temp; -@@ -1027,19 +1043,19 @@ +@@ -1027,19 +1053,19 @@ return (length); case 3: /*******************************************************/ @@ -1999,7 +2694,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c while (nlen < length) nlen += read(infile,ibuf+nlen,(size_t) length+(length%2)-nlen); return (length); -@@ -1061,6 +1077,7 @@ +@@ -1061,6 +1087,7 @@ return 0; } @@ -2007,7 +2702,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c /*********************************************************************/ /* */ /* subroutine check_host - find out what kind of machine we are on */ -@@ -1115,23 +1132,23 @@ +@@ -1115,23 +1142,23 @@ "Host 5 - 32 bit integers without swapping, no var len support."); } @@ -2037,7 +2732,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c onion.llen = inval; temp = onion.ichar[0]; onion.ichar[0]=onion.ichar[3]; -@@ -1146,17 +1163,16 @@ +@@ -1146,17 +1173,13 @@ /**************************************************************************** *_TITLE decompress - decompresses image lines stored in compressed format * *_ARGS TYPE NAME I/O DESCRIPTION */ @@ -2051,16 +2746,16 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c + int *nin; /* I Number of bytes on input buffer */ + int *nout; /* I Number of bytes in output buffer */ { - /* The external root pointer to tree */ - extern NODE *tree; - +- /* The external root pointer to tree */ +- extern NODE *tree; +- dcmprs(ibuf,obuf,nin,nout,tree); - + return; } -@@ -1165,8 +1181,7 @@ +@@ -1165,10 +1188,8 @@ /*************************************************************************** *_TITLE decmpinit - initializes the Huffman tree * *_ARGS TYPE NAME I/O DESCRIPTION */ @@ -2068,9 +2763,11 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c - + int *hist; /* I First-difference histogram. */ { - extern NODE *tree; /* Huffman tree root pointer */ +- extern NODE *tree; /* Huffman tree root pointer */ tree = huff_tree(hist); -@@ -1178,8 +1193,7 @@ + return; + } +@@ -1178,8 +1199,7 @@ /**************************************************************************** *_TITLE huff_tree - constructs the Huffman tree; returns pointer to root * *_ARGS TYPE NAME I/O DESCRIPTION */ @@ -2080,7 +2777,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c { /* Local variables used */ int freq_list[512]; /* Histogram frequency list */ -@@ -1189,7 +1203,6 @@ +@@ -1189,7 +1209,6 @@ NODE **np; /* Node list pointer */ int num_freq; /* Number non-zero frequencies in histogram */ @@ -2088,7 +2785,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c short int num_nodes; /* Counter for DN initialization */ short int cnt; /* Miscellaneous counter */ -@@ -1228,7 +1241,7 @@ +@@ -1228,7 +1247,7 @@ j = 0; for (i=4 ; --i >= 0 ; j = (j << 8) | *(cp+i)); @@ -2097,7 +2794,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c /* Now make the assignment */ *fp++ = j; temp = new_node(num_nodes); -@@ -1341,7 +1354,7 @@ +@@ -1341,7 +1360,7 @@ l--; if ( j <= freq_list) break; } @@ -2106,7 +2803,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c } return; } -@@ -1362,9 +1375,9 @@ +@@ -1362,9 +1381,9 @@ NODE *ptr = root; /* pointer to position in tree */ unsigned char test; /* test byte for bit set */ unsigned char idn; /* input compressed byte */ @@ -2118,7 +2815,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c char *ilim = ibuf + *nin; /* end of compressed bytes */ char *olim = obuf + *nout; /* end of output buffer */ -@@ -1406,10 +1419,9 @@ +@@ -1406,10 +1425,9 @@ /**************************************************************************** *_TITLE free_tree - free memory of all allocated nodes * *_ARGS TYPE NAME I/O DESCRIPTION */ @@ -2131,7 +2828,7 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c *_DESCR This routine is supplied to the programmer to free up all the * * allocated memory required to build the huffman tree. The count * * of the nodes freed is returned in the parameter 'nfreed'. The * -@@ -1417,11 +1429,10 @@ +@@ -1417,16 +1435,13 @@ * than one file per run, the program will not keep allocating new * * memory without first deallocating all previous nodes associated * * with the previous file decompression. * @@ -2144,7 +2841,12 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c { int total_free = 0; -@@ -1435,36 +1446,33 @@ +- extern NODE *tree; /* Huffman tree root pointer */ +- + *nfreed = free_node(tree,total_free); + + return; +@@ -1435,36 +1450,33 @@ int free_node(pnode,total_free) /*************************************************************************** @@ -2188,9 +2890,9 @@ diff -ruN xv-3.10a/vdcomp.c xv-3.10a-bugfixes/vdcomp.c - - -diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c +diff -ru xv-3.10a/xcmap.c xv-3.10a-enhancements/xcmap.c --- xv-3.10a/xcmap.c 1995-01-03 13:14:52.000000000 -0800 -+++ xv-3.10a-bugfixes/xcmap.c 2005-03-20 15:51:59.000000000 -0800 ++++ xv-3.10a-enhancements/xcmap.c 2007-04-15 13:12:41.000000000 -0700 @@ -9,6 +9,9 @@ /* include files */ @@ -2210,6 +2912,15 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c #endif typedef unsigned char byte; +@@ -58,7 +61,7 @@ + int main PARM((int, char **)); + static void HandleEvent PARM((XEvent *)); + static void Syntax PARM((void)); +-static void FatalError PARM((char *)); ++static void FatalError PARM((const char *)); + static void Quit PARM((void)); + static void CreateMainWindow PARM((char *, char *, int, char **)); + static void DrawWindow PARM((int,int,int,int)); @@ -75,50 +78,50 @@ int i; char *display, *geom; @@ -2315,9 +3026,10 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c - + CreateMainWindow(cmd,geom,argc,argv); - Resize(WIDE,HIGH); +- Resize(WIDE,HIGH); - - XSelectInput(theDisp, mainW, ExposureMask | KeyPressMask ++ Resize((int)WIDE,(int)HIGH); + + XSelectInput(theDisp, mainW, ExposureMask | KeyPressMask | StructureNotifyMask | ButtonPressMask); @@ -2368,10 +3080,12 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c XConfigureEvent *conf_event = (XConfigureEvent *) event; - - if (conf_event->window == mainW && +- (conf_event->width != WIDE || conf_event->height != HIGH)) +- Resize(conf_event->width, conf_event->height); ++ int w = conf_event->width, h = conf_event->height; + -+ if (conf_event->window == mainW && - (conf_event->width != WIDE || conf_event->height != HIGH)) - Resize(conf_event->width, conf_event->height); ++ if (conf_event->window == mainW && (w != WIDE || h != HIGH)) ++ Resize((int)(w ? w : WIDE), (int)(h ? h : HIGH)); } break; - @@ -2390,7 +3104,21 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c default: /* ignore unexpected events */ break; } /* end of switch */ -@@ -262,24 +270,31 @@ +@@ -237,10 +245,10 @@ + + + /***********************************/ +-static void FatalError (identifier) +- char *identifier; ++static void FatalError(identifier) ++ const char *identifier; + { +- fprintf(stderr, "%s: %s\n",cmd, identifier); ++ fprintf(stderr, "%s: %s\n", cmd, identifier); + exit(-1); + } + +@@ -262,24 +270,33 @@ XSizeHints hints; int i,x,y; unsigned int w,h; @@ -2400,6 +3128,8 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c - + x=y=w=h=1; ++ hints.flags = 0; ++ i=XParseGeometry(geom,&x,&y,&w,&h); - if (i&WidthValue) WIDE = (int) w; - if (i&HeightValue) HIGH = (int) h; @@ -2437,7 +3167,7 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c hints.x=x; hints.y=y; hints.width = WIDE; hints.height = HIGH; hints.max_width = DisplayWidth(theDisp,theScreen); -@@ -288,22 +303,22 @@ +@@ -288,22 +305,22 @@ hints.min_height = 16; hints.width_inc = hints.height_inc = 16; hints.flags |= PMaxSize | PMinSize | PResizeInc; @@ -2466,7 +3196,7 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c } -@@ -312,11 +327,11 @@ +@@ -312,11 +329,11 @@ int x,y,w,h; { int i,j,x1,y1,x2,y2; @@ -2480,7 +3210,7 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c for (i=y1; i<y2; i++) { for (j=x1; j<x2; j++) { XSetForeground(theDisp,theGC,(unsigned long) (i*nycells+j) ); -@@ -343,18 +358,18 @@ +@@ -343,18 +360,18 @@ { /* called when there's a button press in the window. draws the pixel value, and loops until button is released */ @@ -2503,7 +3233,7 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c DrawPixValue(x,y); } } -@@ -367,10 +382,10 @@ +@@ -367,10 +384,10 @@ { static unsigned long pix, lastpix; static int pvaly; @@ -2516,7 +3246,7 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c if (!pvalup) { /* it's not up. make it so */ if (y >= HIGH/2) pvaly = 0; else pvaly = HIGH - 12; pvalup = 1; -@@ -378,30 +393,30 @@ +@@ -378,30 +395,30 @@ XClearArea(theDisp,mainW,0,pvaly, (unsigned int) WIDE, (unsigned int) 13,True); } @@ -2555,9 +3285,9 @@ diff -ruN xv-3.10a/xcmap.c xv-3.10a-bugfixes/xcmap.c XDrawImageString(theDisp,mainW,theGC,5,pvaly+10,tmpstr, (int) strlen(tmpstr)); } -diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c +diff -ru xv-3.10a/xv.c xv-3.10a-enhancements/xv.c --- xv-3.10a/xv.c 1995-01-19 10:08:43.000000000 -0800 -+++ xv-3.10a-bugfixes/xv.c 2005-03-20 22:25:22.000000000 -0800 ++++ xv-3.10a-enhancements/xv.c 2007-05-13 18:44:55.000000000 -0700 @@ -33,9 +33,9 @@ /* a mono-spaced font needed for the 'pixel value tracking' feature */ @@ -2570,23 +3300,160 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* default positions for various windows */ -@@ -116,13 +116,13 @@ +@@ -54,14 +54,35 @@ + static int randomShow = 0; /* do a 'random' slideshow */ + static int startIconic = 0; /* '-iconic' option */ + static int defaultVis = 0; /* true if using DefaultVisual */ ++#ifdef HAVE_G3 ++static int fax = 0; /* temporary(?) kludge */ ++int highresfax = 0; ++#endif + static double hexpand = 1.0; /* '-expand' argument */ + static double vexpand = 1.0; /* '-expand' argument */ +-static char *maingeom = NULL; +-static char *icongeom = NULL; ++static const char *maingeom = NULL; ++static const char *icongeom = NULL; + static Atom __SWM_VROOT = None; + + static char basefname[128]; /* just the current fname, no path */ + ++#ifdef TV_L10N ++# ifndef TV_FONTSET ++# define TV_FONTSET "-*-fixed-medium-r-normal--%d-*" ++# endif ++# ifndef TV_FONTSIZE ++# define TV_FONTSIZE 14,16 ++# endif ++static int mfontsize[] = { TV_FONTSIZE, 0 }; ++static char mfontset[256]; ++#endif ++ ++#ifdef HAVE_JP2K ++static byte jp2k_magic[12] = ++ { 0, 0, 0, 0x0c, 'j', 'P', ' ', ' ', 0x0d, 0x0a, 0x87, 0x0a }; ++#endif ++ ++ + /* things to do upon successfully loading an image */ + static int autoraw = 0; /* force raw if using stdcmap */ + static int autodither = 0; /* dither */ +@@ -78,6 +99,12 @@ + + static int force8 = 0; /* force 8-bit mode */ + static int force24 = 0; /* force 24-bit mode */ ++#ifdef HAVE_PCD ++static int PcdSize = -1; /* force dialog to ask */ ++#endif ++ ++static float waitsec_nonfinal = -1; /* "normal" waitsec value */ ++static float waitsec_final = -1; /* final-image waitsec value */ + + /* used in DeleteCmd() and Quit() */ + static char **mainargv; +@@ -92,7 +119,7 @@ + static void parseResources PARM((int, char **)); + static void parseCmdLine PARM((int, char **)); + static void verifyArgs PARM((void)); +-static void printoption PARM((char *)); ++static void printoption PARM((const char *)); + static void cmdSyntax PARM((void)); + static void rmodeSyntax PARM((void)); + static int openPic PARM((int)); +@@ -103,32 +130,34 @@ + static void openNextLoop PARM((void)); + static void openPrevPic PARM((void)); + static void openNamedPic PARM((void)); +-static int findRandomPic PARM((void)); + static void mainLoop PARM((void)); +-static void createMainWindow PARM((char *, char *)); +-static void setWinIconNames PARM((char *)); ++static void createMainWindow PARM((const char *, const char *)); ++static void setWinIconNames PARM((const char *)); + static void makeDispNames PARM((void)); + static void fixDispNames PARM((void)); + static void deleteFromList PARM((int)); +-static int argcmp PARM((char *, char *, int, int, int *)); ++static int argcmp PARM((const char *, const char *, ++ int, int, int *)); + static void add_filelist_to_namelist PARM((char *, char **, int *, int)); + /* formerly local vars in main, made local to this module when parseResources() and parseCmdLine() were split out of main() */ - -+ - int imap, ctrlmap, gmap, browmap, cmtmap, clrroot, nopos, limit2x; - char *display, *whitestr, *blackstr, *histr, *lostr, - *infogeom, *fgstr, *bgstr, *ctrlgeom, *gamgeom, *browgeom, *tmpstr; - char *rootfgstr, *rootbgstr, *visualstr, *textgeom, *cmtgeom; - char *monofontname, *flistName; +-int imap, ctrlmap, gmap, browmap, cmtmap, clrroot, nopos, limit2x; +-char *display, *whitestr, *blackstr, *histr, *lostr, +- *infogeom, *fgstr, *bgstr, *ctrlgeom, *gamgeom, *browgeom, *tmpstr; +-char *rootfgstr, *rootbgstr, *visualstr, *textgeom, *cmtgeom; +-char *monofontname, *flistName; -int curstype, stdinflag, browseMode, savenorm, preview, pscomp, preset, -+int curstype, stdinflag, browseMode, savenorm, preview, pscomp, preset, - rmodeset, gamset, cgamset, perfect, owncmap, rwcolor, stdcmap; - int nodecor; - double gamval, rgamval, ggamval, bgamval; -@@ -177,16 +177,16 @@ +- rmodeset, gamset, cgamset, perfect, owncmap, rwcolor, stdcmap; +-int nodecor; +-double gamval, rgamval, ggamval, bgamval; +- +- + ++static int imap, ctrlmap, gmap, browmap, cmtmap, clrroot, nopos, limit2x; ++static const char *histr, *lostr, *fgstr, *bgstr, *tmpstr; ++static const char *infogeom, *ctrlgeom, *gamgeom, *browgeom, *textgeom, *cmtgeom; ++static char *display, *whitestr, *blackstr; ++static char *rootfgstr, *rootbgstr, *imagebgstr, *visualstr; ++static char *monofontname, *flistName; ++#ifdef TV_L10N ++static char **misscharset, *defstr; ++static int nmisscharset; ++#endif ++static int curstype, stdinflag, browseMode, savenorm, preview, pscomp, preset, ++ rmodeset, gamset, cgamset, perfect, owncmap, rwcolor, stdcmap; ++static int nodecor; ++static double gamval, rgamval, ggamval, bgamval; + + /*******************************************/ + int main(argc, argv) +@@ -137,6 +166,9 @@ + /*******************************************/ + { + int i; ++#ifdef TV_L10N ++ int j; ++#endif + XColor ecdef; + Window rootReturn, parentReturn, *children; + unsigned int numChildren, rootDEEP; +@@ -153,6 +185,13 @@ + /*** variable Initialization ***/ + /*****************************************************/ + ++#ifdef TV_L10N ++ /* setlocale(LC_ALL, localeList[LOCALE_EUCJ]); */ ++ setlocale(LC_ALL, ""); ++ xlocale = (int)XSupportsLocale(); /* assume that (Bool) is (int) */ ++ /* if X doesn't support ja_JP.ujis text viewer l10n doesn't work. */ ++#endif ++ + xv_getwd(initdir, sizeof(initdir)); + searchdir[0] = '\0'; + fullfname[0] = '\0'; +@@ -162,7 +201,7 @@ + + /* init internal variables */ + display = NULL; +- fgstr = bgstr = rootfgstr = rootbgstr = NULL; ++ fgstr = bgstr = rootfgstr = rootbgstr = imagebgstr = NULL; + histr = lostr = whitestr = blackstr = NULL; + visualstr = monofontname = flistName = NULL; + winTitle = NULL; +@@ -172,21 +211,26 @@ + + picComments = (char *) NULL; + ++ if (picExifInfo) free(picExifInfo); ++ picExifInfo = (byte *) NULL; ++ picExifInfoSize = 0; ++ + numPages = 1; curPage = 0; + pageBaseName[0] = '\0'; LocalCmap = browCmap = 0; stdinflag = 0; @@ -2594,6 +3461,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c + autoclose = autoDelete = 0; cmapInGam = 0; grabDelay = 0; ++ startGrab = 0; showzoomcursor = 0; perfect = owncmap = stdcmap = rwcolor = 0; @@ -2606,8 +3474,27 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c picType = -1; /* gets set once file is loaded */ colorMapMode = CM_NORMAL; haveStdCmap = STD_NONE; -@@ -230,11 +230,11 @@ - } +@@ -221,24 +265,27 @@ + cmd = (char *) rindex(argv[0],'/'); + if (!cmd) cmd = argv[0]; else cmd++; + +- tmpstr = (char *) getenv("TMPDIR"); +- if (!tmpstr) tmpdir = "/tmp"; +- else { +- tmpdir = (char *) malloc(strlen(tmpstr) + 1); +- if (!tmpdir) FatalError("can't malloc 'tmpdir'\n"); +- strcpy(tmpdir, tmpstr); +- } ++ tmpstr = (const char *) getenv("TMPDIR"); ++ if (!tmpstr) tmpstr = "/tmp"; ++ tmpdir = (char *) malloc(strlen(tmpstr) + 1); ++ if (!tmpdir) FatalError("can't malloc 'tmpdir'\n"); ++ strcpy(tmpdir, tmpstr); ++ ++#ifdef AUTO_EXPAND ++ Vdinit(); ++ vd_handler_setup(); ++#endif /* init command-line options flags */ - infogeom = DEFINFOGEOM; ctrlgeom = DEFCTRLGEOM; @@ -2620,7 +3507,83 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c ninstall = 0; fixedaspect = 0; noFreeCols = nodecor = 0; DEBUG = 0; bwidth = 2; nolimits = useroot = clrroot = noqcheck = 0; -@@ -306,7 +306,7 @@ +- waitsec = -1; waitloop = 0; automax = 0; ++ waitsec = waitsec_final = -1.0; waitloop = 0; automax = 0; + rootMode = 0; hsvmode = 0; + rmodeset = gamset = cgamset = 0; + nopos = limit2x = 0; +@@ -251,6 +298,10 @@ + preset = 0; + viewonly = 0; + ++#ifdef ENABLE_FIXPIX_SMOOTH ++ do_fixpix_smooth = 0; ++#endif ++ + /* init 'xormasks' array */ + xorMasks[0] = 0x01010101; + xorMasks[1] = 0x02020203; +@@ -268,15 +319,38 @@ + defaspect = normaspect = 1.0; + mainW = dirW = infoW = ctrlW = gamW = psW = (Window) NULL; + anyBrowUp = 0; ++ incrementalSearchTimeout = 30; + + #ifdef HAVE_JPEG + jpegW = (Window) NULL; jpegUp = 0; + #endif + ++#ifdef HAVE_JP2K ++ jp2kW = (Window) NULL; jp2kUp = 0; ++#endif ++ + #ifdef HAVE_TIFF + tiffW = (Window) NULL; tiffUp = 0; + #endif + ++#ifdef HAVE_PNG ++ pngW = (Window) NULL; pngUp = 0; ++#endif ++ ++ pcdW = (Window) NULL; pcdUp = 0; ++ ++#ifdef HAVE_PIC2 ++ pic2W = (Window) NULL; pic2Up = 0; ++#endif ++ ++#ifdef HAVE_PCD ++ pcdW = (Window) NULL; pcdUp = 0; ++#endif ++ ++#ifdef HAVE_MGCSFX ++ mgcsfxW = (Window) NULL; mgcsfxUp = 0; ++#endif ++ + imap = ctrlmap = gmap = browmap = cmtmap = 0; + + ch_offx = ch_offy = p_offx = p_offy = 0; +@@ -303,13 +377,35 @@ + verifyArgs(); + + ++#if 0 ++#ifdef XVEXECPATH ++ /* set up path to search for external executables */ ++ { ++ char *systempath = getenv("PATH"); ++ char *xvexecpath = getenv("XVPATH"); ++ if (xvexecpath == NULL) xvexecpath = XVEXECPATH; ++ /* FIXME: can systempath == NULL? */ ++ strcat(systempath, ":"); /* FIXME: writing to mem we don't own */ ++ strcat(systempath, xvexecpath); /* FIXME: writing to mem we don't own */ ++ /* FIXME: was there supposed to be a setenv() call in here? */ ++ if (DEBUG) ++ fprintf(stderr, "DEBUG: executable search path: %s\n", systempath); ++ } ++#endif ++#endif ++ ++ /*****************************************************/ /*** X Setup ***/ /*****************************************************/ @@ -2628,12 +3591,22 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c + theScreen = DefaultScreen(theDisp); theCmap = DefaultColormap(theDisp, theScreen); - rootW = RootWindow(theDisp,theScreen); -@@ -321,52 +321,66 @@ +- rootW = RootWindow(theDisp,theScreen); ++ if (spec_window) { ++ rootW = spec_window; ++ } else { ++ rootW = RootWindow(theDisp,theScreen); ++ } + theGC = DefaultGC(theDisp,theScreen); + theVisual = DefaultVisual(theDisp,theScreen); + ncells = DisplayCells(theDisp, theScreen); +@@ -320,53 +416,67 @@ + rootDEEP = dispDEEP; - /* things dependant on theVisual: +- /* things dependant on theVisual: - * dispDEEP, theScreen, rootW, ncells, theCmap, theGC, ++ /* things dependent on theVisual: + * dispDEEP, theScreen, rootW, ncells, theCmap, theGC, * vrWIDE, dispWIDE, vrHIGH, dispHIGH, maxWIDE, maxHIGH */ @@ -2709,7 +3682,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (visualstr && useroot) { fprintf(stderr, "%s: %sUsing default visual.\n", cmd, "Warning: Can't use specified visual on root. "); -@@ -401,11 +415,11 @@ +@@ -401,11 +511,11 @@ long vinfomask; int numvis, best; @@ -2723,7 +3696,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c rvinfo.screen = theScreen; vinfomask |= VisualScreenMask; -@@ -429,9 +443,9 @@ +@@ -429,9 +539,9 @@ /* make linear colormap for DirectColor visual */ if (theVisual->class == DirectColor) makeDirectCmap(); @@ -2735,7 +3708,17 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* turn GraphicsExposures OFF in the default GC */ { -@@ -456,12 +470,12 @@ +@@ -441,9 +551,6 @@ + } + + +- if (!useroot && limit2x) { maxWIDE *= 2; maxHIGH *= 2; } +- if (nolimits) { maxWIDE = 65000; maxHIGH = 65000; } +- + XSetErrorHandler(xvErrorHandler); + + /* always search for virtual root window */ +@@ -456,14 +563,14 @@ Atom actual_type; int actual_format; unsigned long nitems, bytesafter; @@ -2748,9 +3731,29 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c - vrootW = *newRoot; + vrootW = *(Window *)newRoot; XGetWindowAttributes(theDisp, vrootW, &xwa); - vrWIDE = xwa.width; vrHIGH = xwa.height; +- vrWIDE = xwa.width; vrHIGH = xwa.height; ++ maxWIDE = vrWIDE = xwa.width; maxHIGH = vrHIGH = xwa.height; dispDEEP = xwa.depth; -@@ -492,7 +506,7 @@ + break; + } +@@ -472,7 +579,8 @@ + vrootW = pseudo_root(theDisp, theScreen); + #endif + +- ++ if (!useroot && limit2x) { maxWIDE *= 2; maxHIGH *= 2; } ++ if (nolimits) { maxWIDE = 65000; maxHIGH = 65000; } + + + if (clrroot || useroot) { +@@ -486,13 +594,14 @@ + arrow = XCreateFontCursor(theDisp,(u_int) curstype); + cross = XCreateFontCursor(theDisp,XC_crosshair); + tcross = XCreateFontCursor(theDisp,XC_tcross); ++ tlcorner = XCreateFontCursor(theDisp,XC_top_left_corner); + zoom = XCreateFontCursor(theDisp,XC_sizing); + + { XColor fc, bc; fc.red = fc.green = fc.blue = 0xffff; bc.red = bc.green = bc.blue = 0x0000; @@ -2759,7 +3762,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c XRecolorCursor(theDisp, zoom, &fc, &bc); } -@@ -541,7 +555,7 @@ +@@ -541,7 +650,7 @@ /* set up fg,bg colors */ @@ -2768,7 +3771,26 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (fgstr && XParseColor(theDisp, theCmap, fgstr, &ecdef) && xvAllocColor(theDisp, theCmap, &ecdef)) { fg = ecdef.pixel; -@@ -590,7 +604,7 @@ +@@ -561,6 +670,18 @@ + xvAllocColor(theDisp, theCmap, &ecdef)) rootbg = ecdef.pixel; + + ++ /* GRR 19980308: set up image bg color (for transparent images) */ ++ have_imagebg = 0; ++ if (imagebgstr && XParseColor(theDisp, theCmap, imagebgstr, &ecdef) && ++ xvAllocColor(theDisp, theCmap, &ecdef)) { ++ /* imagebg = ecdef.pixel; */ ++ have_imagebg = 1; ++ imagebgR = ecdef.red; ++ imagebgG = ecdef.green; ++ imagebgB = ecdef.blue; ++ } ++ ++ + /* set up hi/lo colors */ + i=0; + if (dispDEEP > 1) { /* only if we're on a reasonable display */ +@@ -590,7 +711,7 @@ if (theVisual->class == StaticGray || theVisual->class == GrayScale) mono = 1; } @@ -2777,7 +3799,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c iconPix = MakePix1(rootW, icon_bits, icon_width, icon_height); -@@ -598,27 +612,27 @@ +@@ -598,32 +719,32 @@ riconPix = MakePix1(rootW, runicon_bits, runicon_width, runicon_height); riconmask= MakePix1(rootW, runiconm_bits, runiconm_width,runiconm_height); @@ -2812,9 +3834,16 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c + (mfinfo = XLoadQueryFont(theDisp,FONT3))==NULL && + (mfinfo = XLoadQueryFont(theDisp,FONT4))==NULL && (mfinfo = XLoadQueryFont(theDisp,FONT5))==NULL) { - sprintf(str, +- sprintf(str, ++ sprintf(dummystr, "couldn't open the following fonts:\n\t%s\n\t%s\n\t%s\n\t%s\n\t%s", -@@ -632,14 +646,14 @@ + FONT1, FONT2, FONT3, FONT4, FONT5); +- FatalError(str); ++ FatalError(dummystr); + } + mfont=mfinfo->fid; + XSetFont(theDisp,theGC,mfont); +@@ -632,45 +753,100 @@ if (monofontname) { monofinfo = XLoadQueryFont(theDisp, monofontname); @@ -2832,9 +3861,13 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c + (monofinfo = XLoadQueryFont(theDisp,MFONT2))==NULL && + (monofinfo = XLoadQueryFont(theDisp,MFONT3))==NULL && (monofinfo = XLoadQueryFont(theDisp,MFONT4))==NULL) { - sprintf(str,"couldn't open %s fonts:\n\t%s\n\t%s\n\t%s\n\t%s", +- sprintf(str,"couldn't open %s fonts:\n\t%s\n\t%s\n\t%s\n\t%s", ++ sprintf(dummystr,"couldn't open %s fonts:\n\t%s\n\t%s\n\t%s\n\t%s", "any of the following", -@@ -649,28 +663,28 @@ + MFONT1, MFONT2, MFONT3, MFONT4); +- FatalError(str); ++ FatalError(dummystr); + } } monofont=monofinfo->fid; @@ -2842,6 +3875,61 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c - - ++#ifdef TV_L10N ++ if (xlocale) { ++ i = 0; ++ while (mfontsize[i]) { ++ xlocale = 1; /* True */ ++ ++ sprintf(mfontset, TV_FONTSET, mfontsize[i]); ++/*fprintf(stderr, "FontSet: %s\n", mfontset);*/ ++ ++ monofset = XCreateFontSet(theDisp, mfontset, ++ &misscharset, &nmisscharset, &defstr); ++# if 0 /* not useful */ ++ if (!monofset) { ++ /* the current locale is not supported */ ++/*fprintf(stderr, "Current locale `%s' is not supported.\n", localeList[i]);*/ ++ xlocale = 0; ++ break; ++ } ++# endif ++/*fprintf(stderr, "# of misscharset in mfontsize[%d]: %d\n", i,nmisscharset);*/ ++ ++ for (j = 0; j < nmisscharset; j++) { ++ if (!strncmp(misscharset[j], "jisx0208", 8)) { ++ /* font for JIS X 0208 is not found */ ++ xlocale = 0; ++ break; ++ } ++ } ++ ++ if (xlocale) { ++ monofsetinfo = XExtentsOfFontSet(monofset); ++ monofsetinfo->max_logical_extent.width = mfontsize[i]; ++ /* correct size of TextViewer ++ in case that JIS X 0208 is not found */ ++ break; ++ } ++ ++ i++; ++ } /* while (mfontsize[i]) */ ++ ++# if 0 ++ if (nmisscharset > 0) { ++ sprintf(dummystr,"missing %d charset:\n", nmisscharset); ++ for (i = 0; i < nmisscharset; i++) { ++ sprintf(dummystr, "%s\t%s\n", dummystr, misscharset[i]); ++ } ++# if 0 ++ FatalError(dummystr); ++# else ++ fprintf(stderr, "%s", dummystr); ++# endif ++ } ++# endif ++ } ++#endif /* TV_L10N */ + + + @@ -2873,11 +3961,23 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* have to malloc namelist[0] so we can free it in deleteFromList() */ namelist[0] = (char *) malloc(strlen(STDINSTR) + 1); if (!namelist[0]) FatalError("unable to to build namelist[0]"); -@@ -679,16 +693,16 @@ +@@ -679,16 +855,28 @@ } else namelist[0] = NULL; } - ++ else if (randomShow) { ++ int i, j; ++ char *tmp; ++ ++ srandom((int)time((time_t *)0)); ++ for (i = numnames; i > 1; i--) { ++ j = random() % i; ++ tmp = namelist[i-1]; ++ namelist[i-1] = namelist[j]; ++ namelist[j] = tmp; ++ } ++ } + if (numnames) makeDispNames(); - @@ -2897,7 +3997,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* create the info box window */ CreateInfo(infogeom); XSelectInput(theDisp, infoW, ExposureMask | ButtonPressMask | KeyPressMask -@@ -698,12 +712,12 @@ +@@ -698,12 +886,12 @@ RedrawInfo(0,0,1000,1000); /* explicit draw if mapped */ XFlush(theDisp); } @@ -2913,7 +4013,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c XSelectInput(theDisp, ctrlW, ExposureMask | ButtonPressMask | KeyPressMask | StructureNotifyMask); if (ctrlmap < 0) { /* map iconified */ -@@ -719,22 +733,22 @@ +@@ -719,22 +907,22 @@ RedrawCtrl(0,0,1000,1000); /* explicit draw if mapped */ XFlush(theDisp); } @@ -2941,7 +4041,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* create the gamma window */ CreateGam(gamgeom, (gamset) ? gamval : -1.0, (cgamset) ? rgamval : -1.0, -@@ -744,60 +758,60 @@ +@@ -744,60 +932,84 @@ XSelectInput(theDisp, gamW, ExposureMask | ButtonPressMask | KeyPressMask | StructureNotifyMask | (cmapInGam ? ColormapChangeMask : 0)); @@ -2991,6 +4091,11 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c #endif - + ++#ifdef HAVE_JP2K ++ CreateJP2KW(); ++ XSetTransientForHint(theDisp, jp2kW, dirW); ++#endif ++ #ifdef HAVE_TIFF CreateTIFFW(); XSetTransientForHint(theDisp, tiffW, dirW); @@ -2998,6 +4103,25 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c - - + ++#ifdef HAVE_PNG ++ CreatePNGW(); ++ XSetTransientForHint(theDisp, pngW, dirW); ++#endif ++ ++#ifdef HAVE_PCD ++ CreatePCDW(); ++ XSetTransientForHint(theDisp, pcdW, dirW); ++#endif ++ ++#ifdef HAVE_PIC2 ++ CreatePIC2W(); ++ XSetTransientForHint(theDisp, pic2W, dirW); ++#endif ++ ++#ifdef HAVE_MGCSFX ++ CreateMGCSFXW(); ++ XSetTransientForHint(theDisp, mgcsfxW, dirW); ++#endif + LoadFishCursors(); SetCursors(-1); @@ -3022,7 +4146,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (force24) { Set824Menus(PIC24); conv24MB.flags[CONV24_LOCK] = 1; -@@ -812,15 +826,15 @@ +@@ -812,15 +1024,15 @@ Set824Menus(PIC8); /* default mode */ picType = PIC8; } @@ -3043,7 +4167,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* Do The Thing... */ mainLoop(); Quit(0); -@@ -832,12 +846,12 @@ +@@ -832,12 +1044,12 @@ /*****************************************************/ static void makeDirectCmap() { @@ -3058,7 +4182,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c rmask = theVisual->red_mask; gmask = theVisual->green_mask; -@@ -849,22 +863,22 @@ +@@ -849,22 +1061,22 @@ if (rshift<0) rmask = rmask << (-rshift); else rmask = rmask >> rshift; @@ -3085,7 +4209,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c for (i=0; i<256; i++) { origgot[i] = 0; directConv[i] = 0; } for (i=numgot=0; i<cmaplen; i++) { -@@ -882,9 +896,9 @@ +@@ -882,9 +1094,9 @@ } } @@ -3097,7 +4221,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* directConv may or may not have holes in it. */ for (i=0; i<cmaplen; i++) { if (!origgot[i]) { -@@ -892,10 +906,10 @@ +@@ -892,10 +1104,10 @@ numbak = numfwd = 0; while ((i - numbak) >= 0 && !origgot[i-numbak]) numbak++; while ((i + numfwd) < cmaplen && !origgot[i+numfwd]) numfwd++; @@ -3110,7 +4234,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (numbak<numfwd) directConv[i] = directConv[i-numbak]; else if (numfwd<999) directConv[i] = directConv[i+numfwd]; else FatalError("DirectColor cmap: can't happen!"); -@@ -926,14 +940,14 @@ +@@ -926,14 +1138,14 @@ { if (!vinfo || best<0) return; @@ -3127,7 +4251,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c (vinfo[best].class==StaticGray) ? "StaticGray" : (vinfo[best].class==StaticColor) ? "StaticColor" : (vinfo[best].class==TrueColor) ? "TrueColor" : -@@ -947,41 +961,41 @@ +@@ -947,41 +1159,45 @@ (int) vinfo[best].red_mask, (int) vinfo[best].green_mask, (int) vinfo[best].blue_mask, vinfo[best].bits_per_rgb); } @@ -3135,7 +4259,12 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c + dispDEEP = vinfo[best].depth; theScreen = vinfo[best].screen; - rootW = RootWindow(theDisp, theScreen); +- rootW = RootWindow(theDisp, theScreen); ++ if (spec_window) { ++ rootW = spec_window; ++ } else { ++ rootW = RootWindow(theDisp,theScreen); ++ } ncells = vinfo[best].colormap_size; theCmap = XCreateColormap(theDisp, rootW, theVisual, AllocNone); - @@ -3180,7 +4309,38 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c vrWIDE = dispWIDE = DisplayWidth(theDisp,theScreen); vrHIGH = dispHIGH = DisplayHeight(theDisp,theScreen); maxWIDE = dispWIDE; maxHIGH = dispHIGH; -@@ -1037,8 +1051,8 @@ +@@ -1000,25 +1216,25 @@ + /* once through the argument list to find the display name + and DEBUG level, if any */ + +- for (i=1; i<argc; i++) { ++ for (i=1; i<argc; ++i) { + if (!strncmp(argv[i],"-help", (size_t) 5)) { /* help */ + cmdSyntax(); + exit(0); + } + + else if (!argcmp(argv[i],"-display",4,0,&pm)) { +- i++; ++ ++i; + if (i<argc) display = argv[i]; + break; + } + +-#ifdef VMS /* in VMS, cmd-line-opts are in lower case */ ++#ifdef VMS /* in VMS, cmd-line opts are in lower case */ + else if (!argcmp(argv[i],"-debug",3,0,&pm)) { +- { if (++i<argc) DEBUG = atoi(argv[i]); } ++ if (++i<argc) DEBUG = atoi(argv[i]); + } + #else + else if (!argcmp(argv[i],"-DEBUG",2,0,&pm)) { +- { if (++i<argc) DEBUG = atoi(argv[i]); } ++ if (++i<argc) DEBUG = atoi(argv[i]); + } + #endif + } +@@ -1037,8 +1253,8 @@ fprintf(stderr,"%s: unable to parse 'aspect' resource\n",cmd); else defaspect = (float) n / (float) d; } @@ -3191,7 +4351,15 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (rd_flag("auto4x3")) auto4x3 = def_int; if (rd_flag("autoClose")) autoclose = def_int; if (rd_flag("autoCrop")) autocrop = def_int; -@@ -1073,7 +1087,7 @@ +@@ -1064,6 +1280,7 @@ + if (rd_flag("ctrlMap")) ctrlmap = def_int; + if (rd_int ("cursor")) curstype = def_int; + if (rd_int ("defaultPreset")) preset = def_int; ++ if (rd_int ("incrementalSearchTimeout")) incrementalSearchTimeout = def_int; + + if (rd_str ("driftKludge")) { + if (sscanf(def_str,"%d %d", &kludge_offx, &kludge_offy) != 2) { +@@ -1073,7 +1290,7 @@ if (rd_str ("expand")) { if (index(def_str, ':')) { @@ -3200,16 +4368,94 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c { hexpand = vexpand = 1.0; } } else hexpand = vexpand = atof(def_str); -@@ -1108,7 +1122,7 @@ +@@ -1081,6 +1298,9 @@ + + if (rd_str ("fileList")) flistName = def_str; + if (rd_flag("fixed")) fixedaspect = def_int; ++#ifdef ENABLE_FIXPIX_SMOOTH ++ if (rd_flag("fixpix")) do_fixpix_smooth = def_int; ++#endif + if (rd_flag("force8")) force8 = def_int; + if (rd_flag("force24")) force24 = def_int; + if (rd_str ("foreground")) fgstr = def_str; +@@ -1092,23 +1312,39 @@ + if (rd_str ("highlight")) histr = def_str; + if (rd_str ("iconGeometry")) icongeom = def_str; + if (rd_flag("iconic")) startIconic = def_int; ++ if (rd_str ("imageBackground")) imagebgstr = def_str; + if (rd_str ("infoGeometry")) infogeom = def_str; + if (rd_flag("infoMap")) imap = def_int; + if (rd_flag("loadBrowse")) browseMode = def_int; + if (rd_str ("lowlight")) lostr = def_str; ++#ifdef MACBINARY ++ if (rd_flag("macbinary")) handlemacb = def_int; ++#endif ++#ifdef HAVE_MGCSFX ++ if (rd_flag("mgcsfx")) mgcsfx = def_int; ++#endif + if (rd_flag("mono")) mono = def_int; + if (rd_str ("monofont")) monofontname = def_str; + if (rd_int ("ncols")) ncols = def_int; + if (rd_flag("ninstall")) ninstall = def_int; + if (rd_flag("nodecor")) nodecor = def_int; + if (rd_flag("nolimits")) nolimits = def_int; ++#ifdef HAVE_MGCSFX ++ if (rd_flag("nomgcsfx")) nomgcsfx = def_int; ++#endif ++#if defined(HAVE_PIC) || defined(HAVE_PIC2) ++ if (rd_flag("nopicadjust")) nopicadjust = def_int; ++#endif + if (rd_flag("nopos")) nopos = def_int; + if (rd_flag("noqcheck")) noqcheck = def_int; + if (rd_flag("nostat")) nostat = def_int; if (rd_flag("ownCmap")) owncmap = def_int; if (rd_flag("perfect")) perfect = def_int; ++#ifdef HAVE_PIC2 ++ if (rd_flag("pic2split")) pic2split = def_int; ++#endif if (rd_flag("popupKludge")) winCtrPosKludge = def_int; - if (rd_str ("print")) strncpy(printCmd, def_str, + if (rd_str ("print")) strncpy(printCmd, def_str, (size_t) PRINTCMDLEN); if (rd_flag("pscompress")) pscomp = def_int; if (rd_flag("pspreview")) preview = def_int; -@@ -1146,7 +1160,7 @@ +@@ -1117,18 +1353,34 @@ + if (rd_flag("reverse")) revvideo = def_int; + if (rd_str ("rootBackground")) rootbgstr = def_str; + if (rd_str ("rootForeground")) rootfgstr = def_str; +- if (rd_int ("rootMode")) { rootMode = def_int; rmodeset++; } ++ if (rd_int ("rootMode")) { rootMode = def_int; ++rmodeset; } + if (rd_flag("rwColor")) rwcolor = def_int; + if (rd_flag("saveNormal")) savenorm = def_int; + if (rd_str ("searchDirectory")) strcpy(searchdir, def_str); + if (rd_str ("textviewGeometry")) textgeom = def_str; + if (rd_flag("useStdCmap")) stdcmap = def_int; + if (rd_str ("visual")) visualstr = def_str; ++#ifdef VS_ADJUST ++ if (rd_flag("vsadjust")) vsadjust = def_int; ++#endif + if (rd_flag("vsDisable")) novbrowse = def_int; + if (rd_str ("vsGeometry")) browgeom = def_str; + if (rd_flag("vsMap")) browmap = def_int; + if (rd_flag("vsPerfect")) browPerfect = def_int; + if (rd_str ("white")) whitestr = def_str; ++ ++ /* Check for any command-bindings to the supported function keys */ ++#define TMPLEN 80 ++ for (i=0; i<FSTRMAX; ++i) { ++ char tmp[TMPLEN]; ++ ++ snprintf(tmp, TMPLEN, "F%dcommand", i+1); ++ if (rd_str(tmp)) ++ fkeycmds[i] = def_str; ++ else ++ fkeycmds[i] = NULL; ++ } ++#undef TMPLEN + } + + +@@ -1146,7 +1398,7 @@ not_in_first_half = 0; @@ -3218,35 +4464,93 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* a file name. put it in list */ if (!nostat) { -@@ -1186,54 +1200,54 @@ +@@ -1158,24 +1410,30 @@ + } + + if (numnames<MAXNAMES) { ++#ifdef AUTO_EXPAND ++ if(Isarchive(argv[i]) == 0){ /* Not archive file */ ++ namelist[numnames++] = argv[i]; ++ } ++#else + namelist[numnames++] = argv[i]; ++#endif + if (numnames==MAXNAMES) { +- fprintf(stderr,"%s: too many filenames. Only using first %d.\n", ++ fprintf(stderr,"%s: too many filenames. Using only first %d.\n", + cmd, MAXNAMES); + } + } + } + +- else if (!strcmp(argv[i], "-")) /* stdin flag */ ++ else if (!strcmp(argv[i], "-")) /* stdin flag */ + stdinflag++; - else if (!argcmp(argv[i],"-best24",3,0,&pm)) /* -best */ +- else if (!argcmp(argv[i],"-24", 3,1,&force24 )); /* force24 */ +- else if (!argcmp(argv[i],"-2xlimit",3,1,&limit2x )); /* 2xlimit */ +- else if (!argcmp(argv[i],"-4x3", 2,1,&auto4x3 )); /* 4x3 */ +- else if (!argcmp(argv[i],"-8", 2,1,&force8 )); /* force8 */ +- else if (!argcmp(argv[i],"-acrop", 3,1,&autocrop)); /* autocrop */ +- +- else if (!argcmp(argv[i],"-aspect",3,0,&pm)) { /* def. aspect */ ++ else if (!argcmp(argv[i],"-24", 3,1,&force24 )); /* force24 */ ++ else if (!argcmp(argv[i],"-2xlimit",3,1,&limit2x )); /* 2xlimit */ ++ else if (!argcmp(argv[i],"-4x3", 2,1,&auto4x3 )); /* 4x3 */ ++ else if (!argcmp(argv[i],"-8", 2,1,&force8 )); /* force8 */ ++ else if (!argcmp(argv[i],"-acrop", 3,1,&autocrop)); /* autocrop */ ++ ++ else if (!argcmp(argv[i],"-aspect",3,0,&pm)) { /* def. aspect */ + int n,d; + if (++i<argc) { + if (sscanf(argv[i],"%d:%d",&n,&d)!=2 || n<1 || d<1) +@@ -1184,57 +1442,65 @@ + } + } + +- else if (!argcmp(argv[i],"-best24",3,0,&pm)) /* -best */ ++ else if (!argcmp(argv[i],"-windowid",3,0,&pm)) { ++ if (++i<argc) { ++ if (sscanf(argv[i], "%ld", &spec_window) != 1) { ++ fprintf(stderr,"%s: bad argument to -windowid '%s'\n",cmd,argv[i]); ++ } ++ } ++ } ++ ++ else if (!argcmp(argv[i],"-best24",3,0,&pm)) /* -best */ conv24 = CONV24_BEST; - +- else if (!argcmp(argv[i],"-bg",3,0,&pm)) /* bg color */ + - else if (!argcmp(argv[i],"-bg",3,0,&pm)) /* bg color */ ++ else if (!argcmp(argv[i],"-bg",3,0,&pm)) /* bg color */ { if (++i<argc) bgstr = argv[i]; } - +- else if (!argcmp(argv[i],"-black",3,0,&pm)) /* black color */ + - else if (!argcmp(argv[i],"-black",3,0,&pm)) /* black color */ ++ else if (!argcmp(argv[i],"-black",3,0,&pm)) /* black color */ { if (++i<argc) blackstr = argv[i]; } - +- else if (!argcmp(argv[i],"-bw",3,0,&pm)) /* border width */ + - else if (!argcmp(argv[i],"-bw",3,0,&pm)) /* border width */ ++ else if (!argcmp(argv[i],"-bw",3,0,&pm)) /* border width */ { if (++i<argc) bwidth=atoi(argv[i]); } - -+ - else if (!argcmp(argv[i],"-cecmap",4,1,&cmapInGam)); /* cmapInGam */ +- else if (!argcmp(argv[i],"-cecmap",4,1,&cmapInGam)); /* cmapInGam */ - +- else if (!argcmp(argv[i],"-cegeometry",4,0,&pm)) /* gammageom */ + - else if (!argcmp(argv[i],"-cegeometry",4,0,&pm)) /* gammageom */ ++ else if (!argcmp(argv[i],"-cecmap",4,1,&cmapInGam)); /* cmapInGam */ ++ ++ else if (!argcmp(argv[i],"-cegeometry",4,0,&pm)) /* gammageom */ { if (++i<argc) gamgeom = argv[i]; } - -+ - else if (!argcmp(argv[i],"-cemap",4,1,&gmap)); /* gmap */ +- else if (!argcmp(argv[i],"-cemap",4,1,&gmap)); /* gmap */ - +- else if (!argcmp(argv[i],"-cgamma",4,0,&pm)) { /* color gamma */ + - else if (!argcmp(argv[i],"-cgamma",4,0,&pm)) { /* color gamma */ ++ else if (!argcmp(argv[i],"-cemap",4,1,&gmap)); /* gmap */ ++ ++ else if (!argcmp(argv[i],"-cgamma",4,0,&pm)) { /* color gamma */ if (i+3<argc) { - rgamval = atof(argv[++i]); - ggamval = atof(argv[++i]); @@ -3258,23 +4562,30 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c cgamset++; } - +- else if (!argcmp(argv[i],"-cgeometry",4,0,&pm)) /* ctrlgeom */ + - else if (!argcmp(argv[i],"-cgeometry",4,0,&pm)) /* ctrlgeom */ ++ else if (!argcmp(argv[i],"-cgeometry",4,0,&pm)) /* ctrlgeom */ { if (++i<argc) ctrlgeom = argv[i]; } - -+ - else if (!argcmp(argv[i],"-clear",4,1,&clrroot)); /* clear */ - else if (!argcmp(argv[i],"-close",4,1,&autoclose)); /* close */ - else if (!argcmp(argv[i],"-cmap", 3,1,&ctrlmap)); /* ctrlmap */ +- else if (!argcmp(argv[i],"-clear",4,1,&clrroot)); /* clear */ +- else if (!argcmp(argv[i],"-close",4,1,&autoclose)); /* close */ +- else if (!argcmp(argv[i],"-cmap", 3,1,&ctrlmap)); /* ctrlmap */ - else if (!argcmp(argv[i],"-cmtgeometry",5,0,&pm)) /* comment geom */ +- else if (!argcmp(argv[i],"-cmtgeometry",5,0,&pm)) /* comment geom */ ++ else if (!argcmp(argv[i],"-clear",4,1,&clrroot)); /* clear */ ++ else if (!argcmp(argv[i],"-close",4,1,&autoclose)); /* close */ ++ else if (!argcmp(argv[i],"-cmap", 3,1,&ctrlmap)); /* ctrlmap */ ++ ++ else if (!argcmp(argv[i],"-cmtgeometry",5,0,&pm)) /* comment geom */ { if (++i<argc) cmtgeom = argv[i]; } - -+ - else if (!argcmp(argv[i],"-cmtmap",5,1,&cmtmap)); /* map cmt window */ +- else if (!argcmp(argv[i],"-cmtmap",5,1,&cmtmap)); /* map cmt window */ - +- else if (!argcmp(argv[i],"-crop",3,0,&pm)) { /* crop */ + - else if (!argcmp(argv[i],"-crop",3,0,&pm)) { /* crop */ ++ else if (!argcmp(argv[i],"-cmtmap",5,1,&cmtmap)); /* map cmt window */ ++ ++ else if (!argcmp(argv[i],"-crop",3,0,&pm)) { /* crop */ if (i+4<argc) { - acropX = atoi(argv[++i]); - acropY = atoi(argv[++i]); @@ -3288,12 +4599,37 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c acrop++; } - +- else if (!argcmp(argv[i],"-cursor",3,0,&pm)) /* cursor */ + - else if (!argcmp(argv[i],"-cursor",3,0,&pm)) /* cursor */ ++ else if (!argcmp(argv[i],"-cursor",3,0,&pm)) /* cursor */ { if (++i<argc) curstype = atoi(argv[i]); } -@@ -1265,7 +1279,7 @@ - else if (!argcmp(argv[i],"-expand",2,0,&pm)) { /* expand factor */ + #ifdef VMS /* in VMS, cmd-line-opts are in lower case */ +@@ -1247,84 +1513,100 @@ + } + #endif + +- else if (!argcmp(argv[i],"-dir",4,0,&pm)) /* search dir */ ++ else if (!argcmp(argv[i],"-dir",4,0,&pm)) /* search dir */ + { if (++i<argc) strcpy(searchdir, argv[i]); } + +- else if (!argcmp(argv[i],"-display",4,0,&pm)) /* display */ ++ else if (!argcmp(argv[i],"-display",4,0,&pm)) /* display */ + { if (++i<argc) display = argv[i]; } + +- else if (!argcmp(argv[i],"-dither",4,1,&autodither)); /* autodither */ ++ else if (!argcmp(argv[i],"-dither",4,1,&autodither)); /* autodither */ + +- else if (!argcmp(argv[i],"-drift",3,0,&pm)) { /* drift kludge */ ++ else if (!argcmp(argv[i],"-drift",3,0,&pm)) { /* drift kludge */ + if (i<argc-2) { + kludge_offx = atoi(argv[++i]); + kludge_offy = atoi(argv[++i]); + } + } + +- else if (!argcmp(argv[i],"-expand",2,0,&pm)) { /* expand factor */ ++ else if (!argcmp(argv[i],"-expand",2,0,&pm)) { /* expand factor */ if (++i<argc) { if (index(argv[i], ':')) { - if (sscanf(argv[i], "%lf:%lf", &hexpand, &vexpand)!=2) @@ -3301,49 +4637,74 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c { hexpand = vexpand = 1.0; } } else hexpand = vexpand = atof(argv[i]); -@@ -1274,47 +1288,47 @@ + } + } - else if (!argcmp(argv[i],"-fg",3,0,&pm)) /* fg color */ +- else if (!argcmp(argv[i],"-fg",3,0,&pm)) /* fg color */ ++#ifdef HAVE_G3 ++ else if (!argcmp(argv[i],"-fax",3,0,&highresfax)); /* fax */ ++#endif ++ ++ else if (!argcmp(argv[i],"-fg",3,0,&pm)) /* fg color */ { if (++i<argc) fgstr = argv[i]; } - -+ - else if (!argcmp(argv[i],"-fixed",3,1,&fixedaspect)); /* fix asp. ratio */ +- else if (!argcmp(argv[i],"-fixed",3,1,&fixedaspect)); /* fix asp. ratio */ - +- else if (!argcmp(argv[i],"-flist",3,0,&pm)) /* file list */ ++ ++ else if (!argcmp(argv[i],"-fixed",5,1,&fixedaspect)); /* fix asp. ratio */ ++ ++#ifdef ENABLE_FIXPIX_SMOOTH ++ else if (!argcmp(argv[i],"-fixpix",5,1,&do_fixpix_smooth)); /* dithering */ ++#endif + - else if (!argcmp(argv[i],"-flist",3,0,&pm)) /* file list */ ++ else if (!argcmp(argv[i],"-flist",3,0,&pm)) /* file list */ { if (++i<argc) flistName = argv[i]; } - else if (!argcmp(argv[i],"-gamma",3,0,&pm)) /* gamma */ +- else if (!argcmp(argv[i],"-gamma",3,0,&pm)) /* gamma */ ++ else if (!argcmp(argv[i],"-gamma",3,0,&pm)) /* gamma */ { if (++i<argc) gamval = atof(argv[i]); gamset++; } - +- else if (!argcmp(argv[i],"-geometry",3,0,&pm)) /* geometry */ + - else if (!argcmp(argv[i],"-geometry",3,0,&pm)) /* geometry */ ++ else if (!argcmp(argv[i],"-geometry",3,0,&pm)) /* geometry */ { if (++i<argc) maingeom = argv[i]; } - +- else if (!argcmp(argv[i],"-grabdelay",3,0,&pm)) /* grabDelay */ + - else if (!argcmp(argv[i],"-grabdelay",3,0,&pm)) /* grabDelay */ ++ else if (!argcmp(argv[i],"-grabdelay",3,0,&pm)) /* grabDelay */ { if (++i<argc) grabDelay = atoi(argv[i]); } - +- else if (!argcmp(argv[i],"-gsdev",4,0,&pm)) /* gsDevice */ + - else if (!argcmp(argv[i],"-gsdev",4,0,&pm)) /* gsDevice */ ++ else if (!argcmp(argv[i],"-gsdev",4,0,&pm)) /* gsDevice */ { if (++i<argc) gsDev = argv[i]; } - +- else if (!argcmp(argv[i],"-gsgeom",4,0,&pm)) /* gsGeometry */ + - else if (!argcmp(argv[i],"-gsgeom",4,0,&pm)) /* gsGeometry */ ++ else if (!argcmp(argv[i],"-gsgeom",4,0,&pm)) /* gsGeometry */ { if (++i<argc) gsGeomStr = argv[i]; } - +- else if (!argcmp(argv[i],"-gsres",4,0,&pm)) /* gsResolution */ + - else if (!argcmp(argv[i],"-gsres",4,0,&pm)) /* gsResolution */ ++ else if (!argcmp(argv[i],"-gsres",4,0,&pm)) /* gsResolution */ { if (++i<argc) gsRes=abs(atoi(argv[i])); } - -+ - else if (!argcmp(argv[i],"-hflip",3,1,&autohflip)); /* hflip */ +- else if (!argcmp(argv[i],"-hflip",3,1,&autohflip)); /* hflip */ - else if (!argcmp(argv[i],"-hi",3,0,&pm)) /* highlight */ +- else if (!argcmp(argv[i],"-hi",3,0,&pm)) /* highlight */ ++ else if (!argcmp(argv[i],"-hflip",3,1,&autohflip)); /* hflip */ ++ ++ else if (!argcmp(argv[i],"-hi",3,0,&pm)) /* highlight */ { if (++i<argc) histr = argv[i]; } - +- else if (!argcmp(argv[i],"-hist", 4,1,&autohisteq)); /* hist eq */ + - else if (!argcmp(argv[i],"-hist", 4,1,&autohisteq)); /* hist eq */ ++#ifdef HAVE_G3 ++ else if (!argcmp(argv[i],"-highresfax",4,0,&highresfax));/* high res. fax */ ++#endif ++ ++ else if (!argcmp(argv[i],"-hist", 4,1,&autohisteq)); /* hist eq */ else if (!argcmp(argv[i],"-hsv", 3,1,&hsvmode)); /* hsvmode */ @@ -3357,11 +4718,19 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c else if (!argcmp(argv[i],"-igeometry",3,0,&pm)) /* infogeom */ { if (++i<argc) infogeom = argv[i]; } - -+ - else if (!argcmp(argv[i],"-imap", 3,1,&imap)); /* imap */ - else if (!argcmp(argv[i],"-lbrowse", 3,1,&browseMode)); /* browse mode */ +- else if (!argcmp(argv[i],"-imap", 3,1,&imap)); /* imap */ +- else if (!argcmp(argv[i],"-lbrowse", 3,1,&browseMode)); /* browse mode */ -@@ -1323,8 +1337,8 @@ +- else if (!argcmp(argv[i],"-lo",3,0,&pm)) /* lowlight */ ++ else if (!argcmp(argv[i],"-imap",3,1,&imap)); /* imap */ ++ ++ else if (!argcmp(argv[i],"-ibg",3,0,&pm)) /* image bkgd color */ ++ { if (++i<argc) imagebgstr = argv[i]; } ++ ++ else if (!argcmp(argv[i],"-lbrowse",3,1,&browseMode)); /* browse mode */ ++ ++ else if (!argcmp(argv[i],"-lo",3,0,&pm)) /* lowlight */ + { if (++i<argc) lostr = argv[i]; } else if (!argcmp(argv[i],"-loadclear",4,1,&clearonload)); /* clearonload */ @@ -3372,15 +4741,23 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c -@@ -1339,18 +1353,18 @@ +@@ -1339,103 +1621,130 @@ if (!argcmp(argv[i],"-max",4,1,&automax)); /* auto maximize */ else if (!argcmp(argv[i],"-maxpect",5,1,&pm)) /* auto maximize */ { automax=pm; fixedaspect=pm; } - + ++#ifdef MACBINARY ++ else if (!argcmp(argv[i],"-macbinary",3,1,&handlemacb)); /* macbinary */ ++#endif ++ else if (!argcmp(argv[i],"-mfn",3,0,&pm)) /* mono font name */ { if (++i<argc) monofontname = argv[i]; } ++#ifdef HAVE_MGCSFX ++ else if (!argcmp(argv[i],"-mgcsfx", 4,1,&mgcsfx)); /* mgcsfx */ ++#endif ++ else if (!argcmp(argv[i],"-mono",3,1,&mono)); /* mono */ - + @@ -3391,11 +4768,35 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c else if (!argcmp(argv[i],"-ncols",3,0,&pm)) /* ncols */ { if (++i<argc) ncols=abs(atoi(argv[i])); } - +- else if (!argcmp(argv[i],"-ninstall", 3,1,&ninstall)); /* inst cmaps?*/ + - else if (!argcmp(argv[i],"-ninstall", 3,1,&ninstall)); /* inst cmaps?*/ ++ else if (!argcmp(argv[i],"-ninstall", 3,1,&ninstall)); /* inst cmaps? */ else if (!argcmp(argv[i],"-nodecor", 4,1,&nodecor)); else if (!argcmp(argv[i],"-nofreecols",4,1,&noFreeCols)); -@@ -1367,61 +1381,61 @@ + else if (!argcmp(argv[i],"-nolimits", 4,1,&nolimits)); /* nolimits */ ++#ifdef HAVE_MGCSFX ++ else if (!argcmp(argv[i],"-nomgcsfx", 4,1,&nomgcsfx)); /* nomgcsfx */ ++#endif ++#if defined(HAVE_PIC) || defined(HAVE_PIC2) ++ else if (!argcmp(argv[i],"-nopicadjust", 4,1,&nopicadjust));/*nopicadjust*/ ++#endif + else if (!argcmp(argv[i],"-nopos", 4,1,&nopos)); /* nopos */ + else if (!argcmp(argv[i],"-noqcheck", 4,1,&noqcheck)); /* noqcheck */ +- else if (!argcmp(argv[i],"-noresetroot",5,1,&resetroot)); /* reset root*/ ++ else if (!argcmp(argv[i],"-noresetroot",5,1,&resetroot)); /* reset root */ + else if (!argcmp(argv[i],"-norm", 5,1,&autonorm)); /* norm */ + else if (!argcmp(argv[i],"-nostat", 4,1,&nostat)); /* nostat */ + else if (!argcmp(argv[i],"-owncmap", 2,1,&owncmap)); /* own cmap */ ++#ifdef HAVE_PCD ++ else if (!argcmp(argv[i],"-pcd", 4,0,&pm)) /* pcd with size */ ++ { if (i+1<argc) PcdSize = atoi(argv[++i]); } ++#endif + else if (!argcmp(argv[i],"-perfect", 3,1,&perfect)); /* -perfect */ ++#ifdef HAVE_PIC2 ++ else if (!argcmp(argv[i],"-pic2split", 3,1,&pic2split)); /* pic2split */ ++#endif + else if (!argcmp(argv[i],"-pkludge", 3,1,&winCtrPosKludge)); + else if (!argcmp(argv[i],"-poll", 3,1,&polling)); /* chk mod? */ else if (!argcmp(argv[i],"-preset",3,0,&pm)) /* preset */ { if (++i<argc) preset=abs(atoi(argv[i])); } @@ -3447,6 +4848,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c - + else if (!argcmp(argv[i],"-smooth",3,1,&autosmooth)); /* autosmooth */ ++ else if (!argcmp(argv[i],"-startgrab",3,1,&startGrab)); /* startGrab */ else if (!argcmp(argv[i],"-stdcmap",3,1,&stdcmap)); /* use stdcmap */ else if (!argcmp(argv[i],"-tgeometry",2,0,&pm)) /* textview geom */ @@ -3460,6 +4862,10 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c { if (++i<argc) visualstr = argv[i]; } - + ++#ifdef VS_ADJUST ++ else if (!argcmp(argv[i],"-vsadjust", 3,1,&vsadjust)); /* vsadjust */ ++#endif ++ else if (!argcmp(argv[i],"-vsdisable",4,1,&novbrowse)); /* disable sch? */ - + @@ -3473,8 +4879,12 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c else if (!argcmp(argv[i],"-vsperfect",3,1,&browPerfect)); /* vs perf. */ else if (!argcmp(argv[i],"-wait",3,0,&pm)) { /* secs betwn pics */ -@@ -1430,12 +1444,12 @@ - if (waitsec<0) waitsec = 0; + if (++i<argc) { +- waitsec = abs(atoi(argv[i])); +- if (waitsec<0) waitsec = 0; ++ char *comma = strchr(argv[i], ','); ++ waitsec_nonfinal = fabs(atof(argv[i])); ++ waitsec_final = comma? fabs(atof(comma+1)) : waitsec_nonfinal; } } - @@ -3489,7 +4899,19 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c else if (not_in_first_half) cmdSyntax(); } -@@ -1462,7 +1476,7 @@ +@@ -1453,7 +1762,11 @@ + /* check options for validity */ + + if (strlen(searchdir)) { /* got a search directory */ ++#ifdef AUTO_EXPAND ++ if (Chvdir(searchdir)) { ++#else + if (chdir(searchdir)) { ++#endif + fprintf(stderr,"xv: unable to cd to directory '%s'.\n",searchdir); + fprintf(stderr, + " Ignoring '-dir' option and/or 'xv.searchDirectory' resource\n"); +@@ -1462,7 +1775,7 @@ } @@ -3498,7 +4920,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c add_filelist_to_namelist(flistName, namelist, &numnames, MAXNAMES); RANGE(curstype,0,254); -@@ -1475,16 +1489,16 @@ +@@ -1475,16 +1788,16 @@ /* if using root, generally gotta map ctrl window, 'cause there won't be any way to ask for it. (no kbd or mouse events from rootW) */ @@ -3518,23 +4940,28 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (grabDelay < 0 || grabDelay > 15) { -@@ -1498,7 +1512,7 @@ +@@ -1498,9 +1811,9 @@ fprintf(stderr," (Valid values: 1, 2, 3, 4)\n"); preset = 0; - } + } - if (waitsec < 0) noFreeCols = 0; /* disallow nfc if not doing slideshow */ +- if (waitsec < 0) noFreeCols = 0; /* disallow nfc if not doing slideshow */ ++ if (waitsec < 0.0) noFreeCols = 0; /* disallow nfc if not doing slideshow */ if (noFreeCols && perfect) { perfect = 0; owncmap = 1; } -@@ -1512,13 +1526,13 @@ + + /* decide what default color allocation stuff we've settled on */ +@@ -1512,24 +1825,24 @@ defaultCmapMode = colorMapMode; /* default mode for 8-bit images */ - if (nopos) { +- maingeom = infogeom = ctrlgeom = gamgeom = browgeom = textgeom = NULL; +- cmtgeom = NULL; + if (nopos) { - maingeom = infogeom = ctrlgeom = gamgeom = browgeom = textgeom = NULL; - cmtgeom = NULL; ++ maingeom = infogeom = ctrlgeom = gamgeom = browgeom = textgeom = cmtgeom = ++ (const char *) NULL; } /* if -root and -maxp, disallow 'integer' tiling modes */ @@ -3543,7 +4970,141 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c (rootMode == RM_TILE || rootMode == RM_IMIRROR)) rootMode = RM_CSOLID; } -@@ -1656,7 +1670,7 @@ + + + ++static int cpos = 0; + + /***********************************/ +-static int cpos = 0; + static void printoption(st) +- char *st; ++ const char *st; + { + if (strlen(st) + cpos > 78) { + fprintf(stderr,"\n "); +@@ -1540,8 +1853,26 @@ + cpos = cpos + strlen(st) + 1; + } + ++ + static void cmdSyntax() + { ++ /* GRR 19980605: added version info for most common libraries */ ++ fprintf(stderr, "XV - %s.\n", REVDATE); ++#ifdef HAVE_JPEG ++ VersionInfoJPEG(); ++#endif ++#ifdef HAVE_JP2K ++ VersionInfoJP2K(); ++#endif ++#ifdef HAVE_TIFF ++ VersionInfoTIFF(); ++#endif ++#ifdef HAVE_PNG ++ VersionInfoPNG(); ++#endif ++ /* pbm/pgm/ppm support is native, not via pbmplus/netpbm libraries */ ++ fprintf(stderr, "\n"); ++ + fprintf(stderr, "Usage:\n"); + printoption(cmd); + printoption("[-]"); +@@ -1579,8 +1910,14 @@ + printoption("[-/+dither]"); + printoption("[-drift dx dy]"); + printoption("[-expand exp | hexp:vexp]"); ++#ifdef HAVE_G3 ++ printoption("[-fax]"); ++#endif + printoption("[-fg color]"); + printoption("[-/+fixed]"); ++#ifdef ENABLE_FIXPIX_SMOOTH ++ printoption("[-/+fixpix]"); ++#endif + printoption("[-flist fname]"); + printoption("[-gamma val]"); + printoption("[-geometry geom]"); +@@ -1591,8 +1928,12 @@ + printoption("[-help]"); + printoption("[-/+hflip]"); + printoption("[-hi color]"); ++#ifdef HAVE_G3 ++ printoption("[-highresfax]"); ++#endif + printoption("[-/+hist]"); + printoption("[-/+hsv]"); ++ printoption("[-ibg color]"); /* GRR 19980314 */ + printoption("[-icgeometry geom]"); + printoption("[-/+iconic]"); + printoption("[-igeometry geom]"); +@@ -1600,9 +1941,15 @@ + printoption("[-/+lbrowse]"); + printoption("[-lo color]"); + printoption("[-/+loadclear]"); ++#ifdef MACBINARY ++ printoption("[-/+macbinary]"); ++#endif + printoption("[-/+max]"); + printoption("[-/+maxpect]"); + printoption("[-mfn font]"); ++#ifdef HAVE_MGCSFX ++ printoption("[-/+mgcsfx]"); ++#endif + printoption("[-/+mono]"); + printoption("[-name str]"); + printoption("[-ncols #]"); +@@ -1610,13 +1957,25 @@ + printoption("[-/+nodecor]"); + printoption("[-/+nofreecols]"); + printoption("[-/+nolimits]"); ++#ifdef HAVE_MGCSFX ++ printoption("[-/+nomgcsfx]"); ++#endif ++#if defined(HAVE_PIC) || defined(HAVE_PIC2) ++ printoption("[-/+nopicadjust]"); ++#endif + printoption("[-/+nopos]"); + printoption("[-/+noqcheck]"); + printoption("[-/+noresetroot]"); + printoption("[-/+norm]"); + printoption("[-/+nostat]"); + printoption("[-/+owncmap]"); ++#ifdef HAVE_PCD ++ printoption("[-pcd size(0=192*128,1,2,3,4=3072*2048)]"); ++#endif + printoption("[-/+perfect]"); ++#ifdef HAVE_PIC2 ++ printoption("[-/+pic2split]"); ++#endif + printoption("[-/+pkludge]"); + printoption("[-/+poll]"); + printoption("[-preset #]"); +@@ -1635,17 +1994,22 @@ + printoption("[-/+rw]"); + printoption("[-slow24]"); + printoption("[-/+smooth]"); ++ printoption("[-/+startgrab]"); + printoption("[-/+stdcmap]"); + printoption("[-tgeometry geom]"); + printoption("[-/+vflip]"); + printoption("[-/+viewonly]"); + printoption("[-visual type]"); ++#ifdef VS_ADJUST ++ printoption("[-/+vsadjust]"); ++#endif + printoption("[-/+vsdisable]"); + printoption("[-vsgeometry geom]"); + printoption("[-/+vsmap]"); + printoption("[-/+vsperfect]"); +- printoption("[-wait seconds]"); ++ printoption("[-wait secs[,final_secs]]"); + printoption("[-white color]"); ++ printoption("[-windowid windowid]"); + printoption("[-/+wloop]"); + printoption("[filename ...]"); + fprintf(stderr,"\n\n"); +@@ -1656,7 +2020,7 @@ /***********************************/ static void rmodeSyntax() { @@ -3552,13 +5113,27 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c cmd, rootMode); fprintf(stderr,"\t0: tiling\n"); fprintf(stderr,"\t1: integer tiling\n"); -@@ -1679,13 +1693,11 @@ +@@ -1668,6 +2032,7 @@ + fprintf(stderr,"\t7: centered on a 'brick' background\n"); + fprintf(stderr,"\t8: symmetrical tiling\n"); + fprintf(stderr,"\t9: symmetrical mirrored tiling\n"); ++ fprintf(stderr,"\t10: upper left corner\n"); + fprintf(stderr,"\n"); + Quit(1); + } +@@ -1675,17 +2040,15 @@ + + /***********************************/ + static int argcmp(a1, a2, minlen, plusallowed, plusminus) +- char *a1, *a2; ++ const char *a1, *a2; int minlen, plusallowed; int *plusminus; { - /* does a string compare between a1 and a2. To return '0', a1 and a2 +- must match to the length of a2, and that length has to + /* does a string compare between a1 and a2. To return '0', a1 and a2 - must match to the length of a2, and that length has to ++ must match to the length of a1, and that length has to be at least 'minlen'. Otherwise, return non-zero. plusminus set to '1' if '-option', '0' if '+option' */ @@ -3567,7 +5142,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if ((strlen(a1) < (size_t) minlen) || (strlen(a2) < (size_t) minlen)) return 1; if (strlen(a1) > strlen(a2)) return 1; -@@ -1694,7 +1706,7 @@ +@@ -1694,7 +2057,7 @@ if (a1[0]=='-' || (plusallowed && a1[0]=='+')) { /* only set if we match */ @@ -3576,17 +5151,21 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c return 0; } -@@ -1721,8 +1733,7 @@ +@@ -1721,8 +2084,11 @@ int oldCXOFF, oldCYOFF, oldCWIDE, oldCHIGH, wascropped; char *tmp; char *fullname, /* full name of the original file */ - filename[512], /* full name of file to load (could be /tmp/xxx)*/ - globnm[512]; /* globbed version of fullname of orig file */ + filename[512]; /* full name of file to load (could be /tmp/xxx)*/ ++#ifdef MACBINARY ++ char origname[512]; /* file name of original file (NO processing) */ ++ origname[0] = '\0'; ++#endif xvbzero((char *) &pinfo, sizeof(PICINFO)); -@@ -1748,7 +1759,7 @@ +@@ -1748,7 +2114,7 @@ /* if we're not loading next or prev page in a multi-page doc, kill off page files */ @@ -3595,7 +5174,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c killpage = 1; -@@ -1799,7 +1810,7 @@ +@@ -1799,14 +2165,13 @@ } else if (filenum == PADDED) { @@ -3604,25 +5183,66 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c basefname(compute from fullfname) */ i = LoadPad(&pinfo, fullfname); -@@ -1864,7 +1875,7 @@ + fullname = fullfname; + strcpy(filename, fullfname); +- tmp = BaseName(fullfname); +- strcpy(basefname, tmp); ++ strcpy(basefname, BaseName(fullfname)); + + if (!i) goto FAILED; /* shouldn't happen */ + +@@ -1855,33 +2220,48 @@ + frompipe = 1; + } + } ++#ifdef AUTO_EXPAND ++ else { ++ fullname = (char *) malloc(MAXPATHLEN+2); ++ strcpy(fullname, namelist[filenum]); // 1 of 2 places fullname != const ++ freename = 1; ++ } ++ tmp = (char *) rindex(fullname, '/'); ++ if (tmp) { ++ *tmp = '\0'; // 2 of 2 places fullname != const ++ Mkvdir(fullname); ++ *tmp = '/'; ++ } ++ Dirtovd(fullname); ++#else + else fullname = namelist[filenum]; +- ++#endif + + strcpy(fullfname, fullname); +- tmp = BaseName(fullname); +- strcpy(basefname, tmp); ++ strcpy(basefname, BaseName(fullname)); /* chop off trailing ".Z", ".z", or ".gz" from displayed basefname, if any */ - if (strlen(basefname) > (size_t) 2 && -+ if (strlen(basefname) > (size_t) 2 && - strcmp(basefname+strlen(basefname)-2,".Z")==0) +- strcmp(basefname+strlen(basefname)-2,".Z")==0) ++ if (strlen(basefname)>2 && strcmp(basefname+strlen(basefname)-2,".Z")==0) basefname[strlen(basefname)-2]='\0'; else { -@@ -1872,7 +1883,7 @@ - if (strlen(basefname)>2 && strcmp(basefname+strlen(basefname)-2,".Z")==0) + #ifdef GUNZIP +- if (strlen(basefname)>2 && strcmp(basefname+strlen(basefname)-2,".Z")==0) ++ if (strlen(basefname)>2 && strcmp(basefname+strlen(basefname)-2,".z")==0) basefname[strlen(basefname)-2]='\0'; - +- - else if (strlen(basefname)>3 && -+ else if (strlen(basefname)>3 && - strcmp(basefname+strlen(basefname)-3,".gz")==0) +- strcmp(basefname+strlen(basefname)-3,".gz")==0) ++ else ++ if (strlen(basefname)>3 && strcmp(basefname+strlen(basefname)-3,".gz")==0) basefname[strlen(basefname)-3]='\0'; - #endif /* GUNZIP */ -@@ -1881,7 +1892,7 @@ +-#endif /* GUNZIP */ ++#endif ++#ifdef BUNZIP2 ++ if (strlen(basefname)>4 && strcmp(basefname+strlen(basefname)-4,".bz2")==0) ++ basefname[strlen(basefname)-4]='\0'; ++#endif + } + if (filenum == LOADPIC && ISPIPE(fullname[0])) { /* if we're reading from a pipe, 'filename' will have the /tmp/xvXXXXXX @@ -3631,7 +5251,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c 'initdir' to relative paths, dealing with reading from stdin, etc. */ /* at this point, fullname = "! do some commands", -@@ -1891,11 +1902,11 @@ +@@ -1891,11 +2271,11 @@ else { /* NOT reading from a PIPE */ @@ -3647,7 +5267,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if we have a searchdir (ie, we have multiple places to look), see if such a file exists (via fopen()), if it does, we're done. -@@ -1904,7 +1915,7 @@ +@@ -1904,7 +2284,7 @@ if it does, we're done. if it doesn't, remove all prepended directories, and fall through to error code below. */ @@ -3656,7 +5276,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (filenum!=LOADPIC && fullname[0]!='/' && strcmp(fullname,STDINSTR)!=0) { char *tmp1; -@@ -1954,26 +1965,30 @@ +@@ -1954,28 +2334,40 @@ } } } @@ -3672,6 +5292,9 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (strcmp(filename,STDINSTR)==0) { - FILE *fp; + FILE *fp = NULL; ++#ifndef USE_MKSTEMP ++ int tmpfd; ++#endif -#ifndef VMS +#ifndef VMS @@ -3684,7 +5307,9 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c + fp = fdopen(mkstemp(filename), "w"); +#else mktemp(filename); -+ fp = fopen(filename, "w"); ++ tmpfd = open(filename,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); ++ if (tmpfd < 0) FatalError("openPic(): can't create temporary file"); ++ fp = fdopen(tmpfd,"w"); +#endif + if (!fp) FatalError("openPic(): can't write temporary file"); @@ -3694,8 +5319,35 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c - while ( (i=getchar()) != EOF) putc(i,fp); fclose(fp); ++#ifndef USE_MKSTEMP ++ close(tmpfd); ++#endif + + /* and remove it from list, since we can never reload from stdin */ + if (strcmp(namelist[0], STDINSTR)==0) deleteFromList(0); +@@ -1990,20 +2382,26 @@ + (no pipes or stdin, though it could be compressed) to be loaded */ + filetype = ReadFileType(filename); -@@ -2003,7 +2018,7 @@ ++#ifdef HAVE_MGCSFX ++ if (mgcsfx && filetype == RFT_UNKNOWN){ /* force use MgcSfx */ ++ if(getInputCom() != 0) filetype = RFT_MGCSFX; ++ } ++#endif + +- if (filetype == RFT_COMPRESS) { /* a compressed file. uncompress it */ ++ /* if it's a compressed file, uncompress it: */ ++ if ((filetype == RFT_COMPRESS) || (filetype == RFT_BZIP2)) { + char tmpname[128]; + + if ( + #ifndef VMS +- UncompressFile(filename, tmpname) ++ UncompressFile(filename, tmpname, filetype) + #else +- UncompressFile(basefname, tmpname) ++ UncompressFile(basefname, tmpname, filetype) + #endif ) { filetype = ReadFileType(tmpname); /* and try again */ @@ -3704,7 +5356,98 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c /* if we made a /tmp file (from stdin, etc.) won't need it any more */ if (strcmp(fullname,filename)!=0) unlink(filename); -@@ -2084,7 +2099,7 @@ +@@ -2013,7 +2411,58 @@ + + WaitCursor(); + } +- ++ ++#ifdef MACBINARY ++ if (handlemacb && macb_file == True) { ++ char tmpname[128]; ++ ++ if (RemoveMacbinary(filename, tmpname)) { ++ if (strcmp(fullname,filename)!=0) unlink(filename); ++ strcpy(origname, filename); ++ strcpy(filename, tmpname); ++ } ++ else filetype = RFT_ERROR; ++ ++ WaitCursor(); ++ } ++#endif ++ ++#ifdef HAVE_MGCSFX_AUTO ++ if (filetype == RFT_MGCSFX) { ++ char tmpname[128], tmp[256]; ++ char *icom; ++ ++ if ((icom = mgcsfx_auto_input_com(filename)) != NULL) { ++ sprintf(tmpname, "%s/xvmsautoXXXXXX", tmpdir); ++#ifdef USE_MKSTEMP ++ close(mkstemp(tmpname)); ++#else ++ mktemp(tmpname); ++#endif ++ SetISTR(ISTR_INFO, "Converting to known format by MgcSfx auto..."); ++ sprintf(tmp,"%s >%s", icom, tmpname); ++ } ++ else goto ms_auto_no; ++ ++#ifndef VMS ++ if (system(tmp)) ++#else ++ if (!system(tmp)) ++#endif ++ { ++ SetISTR(ISTR_INFO, "Unable to convert '%s' by MgcSfx auto.", ++ BaseName(filename)); ++ Warning(); ++ filetype = RFT_ERROR; ++ goto ms_auto_no; ++ } ++ ++ filetype = ReadFileType(tmpname); ++ if (strcmp(fullname,filename)!=0) unlink(filename); ++ strcpy(filename, tmpname); ++ } ++ms_auto_no: ++#endif /* HAVE_MGCSFX_AUTO */ + + if (filetype == RFT_ERROR) { + char foostr[512]; +@@ -2027,10 +2476,16 @@ + + if (filetype == RFT_UNKNOWN) { + /* view as a text/hex file */ +- TextView(filename); ++#ifdef MACBINARY ++ if (origname[0]) ++ i = TextView(origname); ++ else ++#endif ++ i = TextView(filename); + SetISTR(ISTR_INFO,"'%s' not in a recognized format.", basefname); + /* Warning(); */ +- goto SHOWN_AS_TEXT; ++ if (i) goto SHOWN_AS_TEXT; ++ else goto FAILED; + } + + if (filetype < RFT_ERROR) { +@@ -2058,8 +2513,9 @@ + if (filetype == RFT_XBM && (!i || pinfo.w==0 || pinfo.h==0)) { + /* probably just a '.h' file or something... */ + SetISTR(ISTR_INFO," "); +- TextView(filename); +- goto SHOWN_AS_TEXT; ++ i = TextView(filename); ++ if (i) goto SHOWN_AS_TEXT; ++ else goto FAILED; + } + + if (!i) { +@@ -2084,7 +2540,7 @@ /**************/ /* SUCCESS!!! */ /**************/ @@ -3713,7 +5456,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c GOTIMAGE: /* successfully read this picture. No failures from here on out -@@ -2097,7 +2112,7 @@ +@@ -2097,7 +2553,7 @@ if (conv24MB.flags[CONV24_LOCK]) { /* locked */ if (pinfo.type==PIC24 && picType==PIC8) { /* 24 -> 8 bit */ byte *pic8; @@ -3722,7 +5465,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c pinfo.r, pinfo.g, pinfo.b); free(pinfo.pic); pinfo.pic = pic8; -@@ -2108,7 +2123,7 @@ +@@ -2108,7 +2564,7 @@ else if (pinfo.type!=PIC24 && picType==PIC24) { /* 8 -> 24 bit */ byte *pic24; @@ -3731,7 +5474,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c pinfo.r, pinfo.g, pinfo.b); free(pinfo.pic); pinfo.pic = pic24; -@@ -2144,7 +2159,7 @@ +@@ -2144,7 +2600,7 @@ if (mainW && !useroot) { /* avoid generating excess configure events while we resize the window */ @@ -3740,7 +5483,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c | StructureNotifyMask | ButtonPressMask | KeyReleaseMask | EnterWindowMask | LeaveWindowMask); -@@ -2162,7 +2177,7 @@ +@@ -2162,11 +2618,13 @@ pHIGH = pinfo.h; if (pinfo.frmType >=0) SetDirSaveMode(F_FORMAT, pinfo.frmType); if (pinfo.colType >=0) SetDirSaveMode(F_COLORS, pinfo.colType); @@ -3749,23 +5492,34 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c SetISTR(ISTR_FORMAT, pinfo.fullInfo); strcpy(formatStr, pinfo.shrtInfo); picComments = pinfo.comment; -@@ -2195,11 +2210,11 @@ + ChangeCommentText(); ++ picExifInfo = pinfo.exifInfo; ++ picExifInfoSize = pinfo.exifInfoSize; + for (i=0; i<256; i++) { + rMap[i] = pinfo.r[i]; +@@ -2194,12 +2652,15 @@ + if (fullname && strcmp(fullname,filename)!=0) unlink(filename); - SetISTR(ISTR_INFO,formatStr); + +- SetISTR(ISTR_INFO,formatStr); - ++ SetISTR(ISTR_INFO, "%s", formatStr); + SetInfoMode(INF_PART); - SetISTR(ISTR_FILENAME, - (filenum==DFLTPIC || filenum==GRABBED || frompipe) - ? "<none>" : basefname); -+ SetISTR(ISTR_FILENAME, "%s", -+ (filenum==DFLTPIC || filenum==GRABBED || frompipe) ? -+ "<none>" : basefname); ++ if (filenum==DFLTPIC || filenum==GRABBED || frompipe) ++ SetISTR(ISTR_FILENAME, "<none>"); ++ else if (numPages > 1) ++ SetISTR(ISTR_FILENAME, "%s Page %d of %d", basefname, curPage+1, numPages); ++ else ++ SetISTR(ISTR_FILENAME, "%s", basefname); SetISTR(ISTR_RES,"%d x %d",pWIDE,pHIGH); SetISTR(ISTR_COLOR, ""); -@@ -2219,7 +2234,7 @@ +@@ -2219,7 +2680,7 @@ /* handle various 'auto-whatever' command line options @@ -3774,7 +5528,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c setting the expansion factor are skipped, as we'll want it to display in the (already-existing) window at the same size */ -@@ -2254,7 +2269,7 @@ +@@ -2254,7 +2715,7 @@ w = eWIDE; h = (w*3) / 4; eWIDE = w; eHIGH = h; } @@ -3783,7 +5537,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (eWIDE != cWIDE || eHIGH != cHIGH) epic = (byte *) NULL; -@@ -2306,14 +2321,14 @@ +@@ -2306,14 +2767,14 @@ aspWIDE = eWIDE; aspHIGH = eHIGH; /* aspect-corrected eWIDE,eHIGH */ if (hexpand < 0.0) eWIDE=(int)(aspWIDE / -hexpand); /* neg: reciprocal */ @@ -3801,7 +5555,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c int i,x,y,gewide,gehigh; u_int w,h; gewide = eWIDE; gehigh = eHIGH; -@@ -2321,11 +2336,11 @@ +@@ -2321,11 +2782,11 @@ if (i&WidthValue) gewide = (int) w; if (i&HeightValue) gehigh = (int) h; @@ -3815,7 +5569,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (i&WidthValue) { gehigh = (aspHIGH * gewide) / pWIDE; } else { gewide = (aspWIDE * gehigh) / pHIGH; } } -@@ -2391,7 +2406,7 @@ +@@ -2391,7 +2852,7 @@ /* if we're using an integer tiled root mode, truncate eWIDE/eHIGH to be an integer divisor of the display size */ @@ -3824,7 +5578,16 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (useroot && (rootMode == RM_TILE || rootMode == RM_IMIRROR)) { /* make picture size a divisor of the rootW size. round down */ i = (dispWIDE + eWIDE-1) / eWIDE; eWIDE = (dispWIDE + i-1) / i; -@@ -2419,7 +2434,7 @@ +@@ -2409,7 +2870,7 @@ + if (autodither && ncols>0) epicMode = EM_DITH; + + /* if in CM_STDCMAP mode, and *not* in '-wait 0', then autodither */ +- if (colorMapMode == CM_STDCMAP && waitsec != 0) epicMode = EM_DITH; ++ if (colorMapMode == CM_STDCMAP && waitsec != 0.0) epicMode = EM_DITH; + + /* if -smooth or image has been shrunk to fit screen */ + if (autosmooth || (pWIDE >maxWIDE || pHIGH>maxHIGH) +@@ -2419,7 +2880,7 @@ /* 'dithering' makes no sense in 24-bit mode */ if (picType == PIC24 && epicMode == EM_DITH) epicMode = EM_RAW; @@ -3833,7 +5596,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c SetEpicMode(); } /* end of !frompoll */ -@@ -2450,7 +2465,7 @@ +@@ -2450,7 +2911,7 @@ if (useroot) mainW = vrootW; if (eWIDE != cWIDE || eHIGH != cHIGH) epic = (byte *) NULL; @@ -3842,7 +5605,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c GenerateEpic(eWIDE, eHIGH); /* want to dither *after* color allocs */ CreateXImage(); -@@ -2474,7 +2489,7 @@ +@@ -2474,7 +2935,7 @@ SetISTR(ISTR_INFO,"%s %s %s", formatStr, (picType==PIC8) ? "8-bit mode." : "24-bit mode.", tmp); @@ -3851,7 +5614,16 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c SetInfoMode(INF_FULL); if (freename) free(fullname); -@@ -2499,16 +2514,16 @@ +@@ -2495,20 +2956,24 @@ + to generate the correct exposes (particularly with 'BitGravity' turned + on */ + +- if (mainW && !useroot) GenExpose(mainW, 0, 0, (u_int) eWIDE, (u_int) eHIGH); ++ /*Brian T. Schellenberger: fix for X 4.2 refresh problem*/ ++ if (mainW && !useroot) { ++ XSync(theDisp, False); ++ GenExpose(mainW, 0, 0, (u_int) eWIDE, (u_int) eHIGH); ++ } return 1; @@ -3871,59 +5643,352 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c deleteFromList(filenum); if (polling) sleep(1); -@@ -2546,7 +2561,7 @@ +@@ -2527,6 +2992,9 @@ + } + + ++extern byte ZXheader[128]; /* [JCE] Spectrum screen magic number is ++ defined in xvzx.c */ ++ + + /********************************/ + int ReadFileType(fname) +@@ -2539,76 +3007,118 @@ + + FILE *fp; + byte magicno[30]; /* first 30 bytes of file */ +- int rv, n; ++ int rv=RFT_UNKNOWN, n; ++#ifdef MACBINARY ++ int macbin_alrchk = False; ++#endif + + if (!fname) return RFT_ERROR; /* shouldn't happen */ + fp = xv_fopen(fname, "r"); if (!fp) return RFT_ERROR; - n = fread(magicno, (size_t) 1, (size_t) 30, fp); -+ n = fread(magicno, (size_t) 1, (size_t) 30, fp); ++ if (strlen(fname) > 4 && ++ strcasecmp(fname+strlen(fname)-5, ".wbmp")==0) rv = RFT_WBMP; ++ ++ n = fread(magicno, (size_t) 1, sizeof(magicno), fp); fclose(fp); - if (n<30) return RFT_UNKNOWN; /* files less than 30 bytes long... */ -@@ -2559,7 +2574,7 @@ +- if (n<30) return RFT_UNKNOWN; /* files less than 30 bytes long... */ ++ if (n<=0) return RFT_UNKNOWN; ++ ++ /* it is just barely possible that a few files could legitimately be as small ++ as 30 bytes (e.g., binary P{B,G,P}M format), so zero out rest of "magic ++ number" buffer and don't quit immediately if we read something small but ++ not empty */ ++ if (n<30) memset(magicno+n, 0, sizeof(magicno)-n); + +- rv = RFT_UNKNOWN; ++#ifdef MACBINARY ++ macb_file = False; ++ while (1) { ++#endif + +- if (strncmp((char *) magicno,"GIF87a", (size_t) 6)==0 || +- strncmp((char *) magicno,"GIF89a", (size_t) 6)==0) rv = RFT_GIF; ++#ifdef HAVE_MGCSFX ++ if (is_mgcsfx(fname, magicno, 30) != 0) rv = RFT_MGCSFX; ++ else ++#endif ++ if (strncmp((char *) magicno,"GIF87a", (size_t) 6)==0 || ++ strncmp((char *) magicno,"GIF89a", (size_t) 6)==0) rv = RFT_GIF; + else if (strncmp((char *) magicno,"VIEW", (size_t) 4)==0 || - strncmp((char *) magicno,"WEIV", (size_t) 4)==0) rv = RFT_PM; +- strncmp((char *) magicno,"WEIV", (size_t) 4)==0) rv = RFT_PM; ++ strncmp((char *) magicno,"WEIV", (size_t) 4)==0) rv = RFT_PM; ++ ++#ifdef HAVE_PIC2 ++ else if (magicno[0]=='P' && magicno[1]=='2' && ++ magicno[2]=='D' && magicno[3]=='T') rv = RFT_PIC2; ++#endif - else if (magicno[0] == 'P' && magicno[1]>='1' && +- magicno[1]<='6') rv = RFT_PBM; + else if (magicno[0] == 'P' && magicno[1]>='1' && - magicno[1]<='6') rv = RFT_PBM; ++ (magicno[1]<='6' || magicno[1]=='8')) rv = RFT_PBM; /* note: have to check XPM before XBM, as first 2 chars are the same */ -@@ -2586,7 +2601,7 @@ + else if (strncmp((char *) magicno, "/* XPM */", (size_t) 9)==0) rv = RFT_XPM; + + else if (strncmp((char *) magicno,"#define", (size_t) 7)==0 || +- (magicno[0] == '/' && magicno[1] == '*')) rv = RFT_XBM; ++ (magicno[0] == '/' && magicno[1] == '*')) rv = RFT_XBM; + + else if (magicno[0]==0x59 && (magicno[1]&0x7f)==0x26 && +- magicno[2]==0x6a && (magicno[3]&0x7f)==0x15) rv = RFT_SUNRAS; ++ magicno[2]==0x6a && (magicno[3]&0x7f)==0x15) rv = RFT_SUNRAS; + +- else if (magicno[0] == 'B' && magicno[1] == 'M') rv = RFT_BMP; ++ else if (magicno[0] == 'B' && magicno[1] == 'M') rv = RFT_BMP; - else if (magicno[0]==0x0a && magicno[1] <= 5) rv = RFT_PCX; +- else if (magicno[0]==0x52 && magicno[1]==0xcc) rv = RFT_UTAHRLE; ++ else if (magicno[0]==0x52 && magicno[1]==0xcc) rv = RFT_UTAHRLE; + + else if ((magicno[0]==0x01 && magicno[1]==0xda) || +- (magicno[0]==0xda && magicno[1]==0x01)) rv = RFT_IRIS; ++ (magicno[0]==0xda && magicno[1]==0x01)) rv = RFT_IRIS; + +- else if (magicno[0]==0x1f && magicno[1]==0x9d) rv = RFT_COMPRESS; ++ else if (magicno[0]==0x1f && magicno[1]==0x9d) rv = RFT_COMPRESS; + + #ifdef GUNZIP +- else if (magicno[0]==0x1f && magicno[1]==0x8b) rv = RFT_COMPRESS; ++ else if (magicno[0]==0x1f && magicno[1]==0x8b) rv = RFT_COMPRESS; ++#endif ++ ++#ifdef BUNZIP2 ++ else if (magicno[0]==0x42 && magicno[1]==0x5a) rv = RFT_BZIP2; + #endif + +- else if (magicno[0]==0x0a && magicno[1] <= 5) rv = RFT_PCX; ++ else if (magicno[0]==0x0a && magicno[1] <= 5) rv = RFT_PCX; - else if (strncmp((char *) magicno, "FORM", (size_t) 4)==0 && +- strncmp((char *) magicno+8, "ILBM", (size_t) 4)==0) rv = RFT_IFF; + else if (strncmp((char *) magicno, "FORM", (size_t) 4)==0 && - strncmp((char *) magicno+8, "ILBM", (size_t) 4)==0) rv = RFT_IFF; ++ strncmp((char *) magicno+8, "ILBM", (size_t) 4)==0) rv = RFT_IFF; else if (magicno[0]==0 && magicno[1]==0 && -@@ -2597,12 +2612,12 @@ + magicno[2]==2 && magicno[3]==0 && + magicno[4]==0 && magicno[5]==0 && +- magicno[6]==0 && magicno[7]==0) rv = RFT_TARGA; ++ magicno[6]==0 && magicno[7]==0) rv = RFT_TARGA; + else if (magicno[4]==0x00 && magicno[5]==0x00 && - magicno[6]==0x00 && magicno[7]==0x07) rv = RFT_XWD; +- magicno[6]==0x00 && magicno[7]==0x07) rv = RFT_XWD; ++ magicno[6]==0x00 && magicno[7]==0x07) rv = RFT_XWD; - else if (strncmp((char *) magicno,"SIMPLE ", (size_t) 8)==0 && -+ else if (strncmp((char *) magicno,"SIMPLE ", (size_t) 8)==0 && - magicno[29] == 'T') rv = RFT_FITS; +- magicno[29] == 'T') rv = RFT_FITS; - ++ else if (strncmp((char *) magicno,"SIMPLE ", (size_t) 8)==0 && ++ magicno[29] == 'T') rv = RFT_FITS; + ++ /* [JCE] Spectrum screen */ ++ else if (memcmp(magicno, ZXheader, (size_t) 18)==0) rv = RFT_ZX; #ifdef HAVE_JPEG - else if (magicno[0]==0xff && magicno[1]==0xd8 && +- magicno[2]==0xff) rv = RFT_JFIF; + else if (magicno[0]==0xff && magicno[1]==0xd8 && - magicno[2]==0xff) rv = RFT_JFIF; ++ magicno[2]==0xff) rv = RFT_JFIF; ++#endif ++ ++#ifdef HAVE_JP2K ++ else if (magicno[0]==0xff && magicno[1]==0x4f && ++ magicno[2]==0xff && magicno[3]==0x51) rv = RFT_JPC; ++ ++ else if (memcmp(magicno, jp2k_magic, sizeof(jp2k_magic))==0) rv = RFT_JP2; + #endif + + #ifdef HAVE_TIFF + else if ((magicno[0]=='M' && magicno[1]=='M') || +- (magicno[0]=='I' && magicno[1]=='I')) rv = RFT_TIFF; ++ (magicno[0]=='I' && magicno[1]=='I')) rv = RFT_TIFF; ++#endif ++ ++#ifdef HAVE_PNG ++ else if (magicno[0]==0x89 && magicno[1]=='P' && ++ magicno[2]=='N' && magicno[3]=='G') rv = RFT_PNG; + #endif + + #ifdef HAVE_PDS +@@ -2620,11 +3130,67 @@ + rv = RFT_PDSVICAR; + #endif + +-#ifdef GS_PATH ++#ifdef GS_PATH /* Ghostscript handles both PostScript and PDF */ + else if (strncmp((char *) magicno, "%!", (size_t) 2)==0 || +- strncmp((char *) magicno, "\004%!", (size_t) 3)==0) rv = RFT_PS; ++ strncmp((char *) magicno, "\004%!", (size_t) 3)==0 || ++ strncmp((char *) magicno, "%PDF", (size_t) 4)==0) rv = RFT_PS; ++#endif ++ ++#ifdef HAVE_G3 ++ else if ((magicno[0]== 1 && magicno[1]== 1 && ++ magicno[2]== 77 && magicno[3]==154 && ++ magicno[4]==128 && magicno[5]== 0 && ++ magicno[6]== 1 && magicno[7]== 77) ++ || highresfax || fax) /* kludge! */ rv = RFT_G3; ++#endif ++ ++#ifdef HAVE_MAG ++ else if (strncmp((char *) magicno,"MAKI02 ", (size_t) 8)==0) rv = RFT_MAG; ++#endif ++ ++#ifdef HAVE_MAKI ++ else if (strncmp((char *) magicno,"MAKI01A ", (size_t) 8)==0 || ++ strncmp((char *) magicno,"MAKI01B ", (size_t) 8)==0) rv = RFT_MAKI; ++#endif ++ ++#ifdef HAVE_PIC ++ else if (magicno[0]=='P' && magicno[1]=='I'&&magicno[2]=='C') rv = RFT_PIC; ++#endif ++ ++#ifdef HAVE_PI ++ else if (magicno[0]=='P' && magicno[1]=='i') rv = RFT_PI; ++#endif ++ ++#ifdef HAVE_HIPS ++ else if (strstr((char *) magicno, "./digest")) rv = RFT_HIPS; ++#endif ++ ++#ifdef HAVE_PCD ++ else if (magicno[0]==0xff && magicno[1]==0xff && ++ magicno[2]==0xff && magicno[3]==0xff) rv = RFT_PCD; #endif -@@ -2668,7 +2683,7 @@ ++#ifdef MACBINARY ++ /* Now we try to handle MacBinary files, but the method is VERY dirty... */ ++ if (macbin_alrchk == True) { ++ macb_file = True; ++ break; ++ } ++ ++ if (rv != RFT_UNKNOWN) ++ break; ++ ++ /* Skip MACBSIZE and recheck */ ++ macbin_alrchk = True; ++ fp = xv_fopen(fname, "r"); ++ if (!fp) return RFT_ERROR; ++ fseek(fp, MACBSIZE, SEEK_SET); ++ n = fread(magicno, (size_t) 1, (size_t) 30, fp); ++ fclose(fp); ++ ++ if (n<30) return RFT_UNKNOWN; /* files less than 30 bytes long... */ ++ } ++#endif + return rv; + } + +@@ -2637,9 +3203,10 @@ + PICINFO *pinfo; + { + /* if quick is set, we're being called to generate icons, or something +- like that. We should load the image as quickly as possible. Currently, +- this only affects the LoadPS routine, which, if quick is set, only +- generates the page file for the first page of the document */ ++ like that. We should load the image as quickly as possible. Previously, ++ this affected only the LoadPS routine, which, if quick is set, only ++ generates the page file for the first page of the document. Now it ++ also affects PCD, which loads only a thumbnail. */ + + int rv = 0; + +@@ -2650,7 +3217,11 @@ + switch (ftype) { + case RFT_GIF: rv = LoadGIF (fname, pinfo); break; + case RFT_PM: rv = LoadPM (fname, pinfo); break; ++#ifdef HAVE_MGCSFX ++ case RFT_PBM: rv = LoadPBM (fname, pinfo, -1); break; ++#else + case RFT_PBM: rv = LoadPBM (fname, pinfo); break; ++#endif + case RFT_XBM: rv = LoadXBM (fname, pinfo); break; + case RFT_SUNRAS: rv = LoadSunRas(fname, pinfo); break; + case RFT_BMP: rv = LoadBMP (fname, pinfo); break; +@@ -2662,21 +3233,69 @@ + case RFT_XPM: rv = LoadXPM (fname, pinfo); break; + case RFT_XWD: rv = LoadXWD (fname, pinfo); break; + case RFT_FITS: rv = LoadFITS (fname, pinfo, quick); break; ++ case RFT_ZX: rv = LoadZX (fname, pinfo); break; /* [JCE] */ ++ case RFT_WBMP: rv = LoadWBMP (fname, pinfo); break; ++ ++#ifdef HAVE_PCD ++ /* if quick is switched on, use the smallest image size; don't ask the user */ ++ case RFT_PCD: rv = LoadPCD (fname, pinfo, quick ? 0 : PcdSize); break; ++#endif + + #ifdef HAVE_JPEG +- case RFT_JFIF: rv = LoadJFIF (fname, pinfo, quick); break; ++ case RFT_JFIF: rv = LoadJFIF (fname, pinfo, quick); break; ++#endif ++ ++#ifdef HAVE_JP2K ++ case RFT_JPC: rv = LoadJPC (fname, pinfo, quick); break; ++ case RFT_JP2: rv = LoadJP2 (fname, pinfo, quick); break; #endif #ifdef HAVE_TIFF - case RFT_TIFF: rv = LoadTIFF (fname, pinfo); break; -+ case RFT_TIFF: rv = LoadTIFF (fname, pinfo, quick); break; ++ case RFT_TIFF: rv = LoadTIFF (fname, pinfo, quick); break; ++#endif ++ ++#ifdef HAVE_PNG ++ case RFT_PNG: rv = LoadPNG (fname, pinfo); break; #endif #ifdef HAVE_PDS -@@ -2703,7 +2718,7 @@ +- case RFT_PDSVICAR: rv = LoadPDS (fname, pinfo); break; ++ case RFT_PDSVICAR: rv = LoadPDS (fname, pinfo); break; ++#endif ++ ++#ifdef HAVE_G3 ++ case RFT_G3: rv = LoadG3 (fname, pinfo); break; + #endif + + #ifdef GS_PATH +- case RFT_PS: rv = LoadPS (fname, pinfo, quick); break; ++ case RFT_PS: rv = LoadPS (fname, pinfo, quick); break; ++#endif ++ ++#ifdef HAVE_MAG ++ case RFT_MAG: rv = LoadMAG (fname, pinfo); break; ++#endif ++ ++#ifdef HAVE_MAKI ++ case RFT_MAKI: rv = LoadMAKI (fname, pinfo); break; ++#endif ++ ++#ifdef HAVE_PIC ++ case RFT_PIC: rv = LoadPIC (fname, pinfo); break; ++#endif ++ ++#ifdef HAVE_PI ++ case RFT_PI: rv = LoadPi (fname, pinfo); break; ++#endif ++ ++#ifdef HAVE_PIC2 ++ case RFT_PIC2: rv = LoadPIC2 (fname, pinfo, quick); break; ++#endif ++ ++#ifdef HAVE_HIPS ++ case RFT_HIPS: rv = LoadHIPS (fname, pinfo); break; ++#endif ++ ++#ifdef HAVE_MGCSFX ++ case RFT_MGCSFX: rv = LoadMGCSFX (fname, pinfo); break; + #endif + + } +@@ -2685,13 +3304,17 @@ + + + /********************************/ +-int UncompressFile(name, uncompname) ++int UncompressFile(name, uncompname, filetype) + char *name, *uncompname; ++ int filetype; + { + /* returns '1' on success, with name of uncompressed file in uncompname + returns '0' on failure */ + + char namez[128], *fname, buf[512]; ++#ifndef USE_MKSTEMP ++ int tmpfd; ++#endif + + fname = name; + namez[0] = '\0'; +@@ -2703,7 +3326,7 @@ to what it was. necessary because uncompress doesn't handle files that don't end with '.Z' */ @@ -3932,35 +5997,46 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c strcmp(name + strlen(name)-2,".Z")!=0 && strcmp(name + strlen(name)-2,".z")!=0) { strcpy(namez, name); -@@ -2721,34 +2736,42 @@ +@@ -2721,34 +3344,50 @@ #endif /* not VMS and not GUNZIP */ - #ifndef VMS sprintf(uncompname, "%s/xvuXXXXXX", tmpdir); +- mktemp(uncompname); +- sprintf(buf,"%s -c %s >%s", UNCOMPRESS, fname, uncompname); +-#else /* it IS VMS */ +#else -+ strcpy(uncompname, "[]xvuXXXXXX"); + strcpy(uncompname, "[]xvuXXXXXX"); +#endif + +#ifdef USE_MKSTEMP + close(mkstemp(uncompname)); +#else mktemp(uncompname); +-# ifdef GUNZIP +- sprintf(buf,"%s %s %s", UNCOMPRESS, fname, uncompname); +-# else +- sprintf(buf,"%s %s", UNCOMPRESS, fname); +-# endif ++ tmpfd = open(uncompname,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); ++ if (tmpfd < 0) FatalError("UncompressFile(): can't create temporary file"); ++ close(tmpfd); +#endif + +#ifndef VMS - sprintf(buf,"%s -c %s >%s", UNCOMPRESS, fname, uncompname); - #else /* it IS VMS */ -- strcpy(uncompname, "[]xvuXXXXXX"); -- mktemp(uncompname); --# ifdef GUNZIP ++ if (filetype == RFT_COMPRESS) ++ sprintf(buf,"%s -c '%s' > '%s'", UNCOMPRESS, fname, uncompname); ++# ifdef BUNZIP2 ++ else if (filetype == RFT_BZIP2) ++ sprintf(buf,"%s -c '%s' > '%s'", BUNZIP2, fname, uncompname); ++# endif ++#else /* it IS VMS */ +# ifdef GUNZIP - sprintf(buf,"%s %s %s", UNCOMPRESS, fname, uncompname); --# else ++ sprintf(buf,"%s '%s' '%s'", UNCOMPRESS, fname, uncompname); +# else - sprintf(buf,"%s %s", UNCOMPRESS, fname); --# endif ++ sprintf(buf,"%s '%s'", UNCOMPRESS, fname); +# endif #endif @@ -3985,16 +6061,85 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c rename it back to what it once was... */ if (strlen(namez)) { -@@ -2769,7 +2792,7 @@ +@@ -2769,9 +3408,65 @@ } */ #endif /* not VMS */ - + ++ return 1; ++} ++ ++ ++#ifdef MACBINARY ++/********************************/ ++int RemoveMacbinary(src, dst) ++ char *src, *dst; ++{ ++ char buffer[8192]; /* XXX */ ++ int n, eof; ++#ifndef USE_MKSTEMP ++ int tmpfd; ++#endif ++ FILE *sfp, *dfp; ++ ++ sprintf(dst, "%s/xvmXXXXXX", tmpdir); ++#ifdef USE_MKSTEMP ++ close(mkstemp(dst)); ++#else ++ mktemp(dst); ++ tmpfd = open(dst,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); ++ if (tmpfd < 0) FatalError("RemoveMacbinary(): can't create temporary file"); ++#endif ++ ++ SetISTR(ISTR_INFO, "Removing MacBinary..."); ++ ++ sfp = xv_fopen(src, "r"); ++#ifdef USE_MKSTEMP ++ dfp = xv_fopen(dst, "w"); ++#else ++ dfp = fdopen(tmpfd, "w"); ++#endif ++ if (!sfp || !dfp) { ++ SetISTR(ISTR_INFO, "Unable to remove a InfoFile header form '%s'.", src); ++ Warning(); ++ return 0; ++ } ++ fseek(sfp, MACBSIZE, SEEK_SET); ++ while ((n = fread(buffer, 1, sizeof(buffer), sfp)) == 8192) /* XXX */ ++ fwrite(buffer, 1, n, dfp); ++ if ((eof = feof(sfp))) ++ fwrite(buffer, 1, n, dfp); ++ fclose(sfp); ++ fflush(dfp); ++ fclose(dfp); ++#ifndef USE_MKSTEMP ++ close(tmpfd); ++#endif ++ if (!eof) { ++ SetISTR(ISTR_INFO, "Unable to remove a InfoFile header form '%s'.", src); ++ Warning(); ++ return 0; ++ } ++ return 1; } ++#endif -@@ -2798,11 +2821,11 @@ + + /********************************/ +@@ -2789,6 +3484,10 @@ + sprintf(tmp, "%s%d", bname, i); + unlink(tmp); + } ++ ++ /* GRR 20070506: basename file doesn't go away, at least on Linux and for ++ * GIF and TIFF images, so explicitly unlink() it, too */ ++ unlink(bname); + } + + +@@ -2798,11 +3497,11 @@ { int i; @@ -4008,7 +6153,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (picType == PIC8) { byte trans[256]; -@@ -2811,18 +2834,18 @@ +@@ -2811,18 +3510,18 @@ } if (picType == PIC8) { @@ -4031,7 +6176,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c bMap[1] = blkRGB&0xff; } -@@ -2852,10 +2875,10 @@ +@@ -2852,10 +3551,10 @@ } /* save the desired RGB colormap (before dicking with it) */ @@ -4046,7 +6191,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c } } -@@ -2888,7 +2911,7 @@ +@@ -2888,19 +3587,29 @@ { /* cmd is something like: "! bggen 100 0 0" * @@ -4055,7 +6200,13 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c * returns "/tmp/xv******" in fname * returns '0' if everything's cool, '1' on error */ -@@ -2899,8 +2922,12 @@ + + char fullcmd[512], tmpname[64], str[512]; + int i; ++#ifndef USE_MKSTEMP ++ int tmpfd; ++#endif + if (!cmd || (strlen(cmd) < (size_t) 2)) return 1; sprintf(tmpname,"%s/xvXXXXXX", tmpdir); @@ -4064,21 +6215,51 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c +#else mktemp(tmpname); - if (tmpname[0] == '\0') { /* mktemp() blew up */ ++ tmpfd = open(tmpname,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); ++ if (tmpfd < 0) FatalError("openPic(): can't create temporary file"); ++ close(tmpfd); +#endif + if (tmpname[0] == '\0') { /* mktemp() or mkstemp() blew up */ sprintf(str,"Unable to create temporary filename."); ErrPopUp(str, "\nHow unlikely!"); return 1; -@@ -2946,7 +2973,7 @@ - while (numnames>0) { - if (openPic(0)) return; /* success */ - else { +@@ -2939,26 +3648,21 @@ + { + int i; + ++ waitsec = (numnames <= 1)? waitsec_final : waitsec_nonfinal; ++ + if (!numnames) { openPic(DFLTPIC); return; } + + i = 0; +- if (!randomShow) { +- while (numnames>0) { +- if (openPic(0)) return; /* success */ +- else { - if (polling && !i) -+ if (polling && !i) - fprintf(stderr,"%s: POLLING: Waiting for file '%s' \n\tto %s\n", - cmd, namelist[0], "be created, or whatever..."); - i = 1; -@@ -2970,11 +2997,11 @@ +- fprintf(stderr,"%s: POLLING: Waiting for file '%s' \n\tto %s\n", +- cmd, namelist[0], "be created, or whatever..."); +- i = 1; +- } ++ while (numnames>0) { ++ if (openPic(0)) return; /* success */ ++ else { ++ if (polling && !i) ++ fprintf(stderr,"%s: POLLING: Waiting for file '%s' \n\tto %s\n", ++ cmd, namelist[0], "be created, or whatever..."); ++ i = 1; + } + } + +- else { /* pick random first picture */ +- for (i=findRandomPic(); i>=0; i=findRandomPic()) +- if (openPic(i)) return; /* success */ +- } +- + if (numnames>1) FatalError("couldn't open any pictures"); + else Quit(-1); + } +@@ -2970,11 +3674,11 @@ int i; if (curname>=0) i = curname+1; @@ -4092,25 +6273,71 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c while (i<numnames && !openPic(i)); if (i<numnames) return; /* success */ -@@ -2989,7 +3016,7 @@ +@@ -2987,19 +3691,15 @@ + { + int i; - if (!randomShow) { - if (curname>=0) i = curname+1; +- if (!randomShow) { +- if (curname>=0) i = curname+1; - else if (nList.selected >= 0 && nList.selected < numnames) -+ else if (nList.selected >= 0 && nList.selected < numnames) - i = nList.selected; - else i = 0; +- i = nList.selected; +- else i = 0; ++ if (curname>=0) i = curname+1; ++ else if (nList.selected >= 0 && nList.selected < numnames) ++ i = nList.selected; ++ else i = 0; + +- while (i<numnames && !openPic(i)); +- if (i<numnames) return; /* success */ +- } +- else { +- for (i=findRandomPic(); i>=0; i=findRandomPic()) +- if (openPic(i)) return; +- } ++ waitsec = (i == numnames-1)? waitsec_final : waitsec_nonfinal; ++ ++ while (i<numnames && !openPic(i)); ++ if (i<numnames) return; /* success */ + + Quit(0); + } +@@ -3012,25 +3712,21 @@ -@@ -3015,7 +3042,7 @@ - if (!randomShow) { + j = loop = 0; + while (1) { +- if (!randomShow) { - if (curname>=0) i = curname+1; +- if (curname>=0) i = curname+1; - else if (nList.selected >= 0 && nList.selected < numnames) -+ else if (nList.selected >= 0 && nList.selected < numnames) - i = nList.selected; - else i = 0; +- i = nList.selected; +- else i = 0; ++ if (curname>=0) i = curname+1; ++ else if (nList.selected >= 0 && nList.selected < numnames) ++ i = nList.selected; ++ else i = 0; ++ ++ if (loop) { i = 0; loop = 0; } -@@ -3044,7 +3071,7 @@ +- if (loop) { i = 0; loop = 0; } ++ waitsec = (i == numnames-1)? waitsec_final : waitsec_nonfinal; + +- while (i<numnames && !openPic(i)); +- if (i<numnames) return; +- } +- else { +- for (i=findRandomPic(); i>=0; i=findRandomPic()) +- if (openPic(i)) return; +- } ++ while (i<numnames && !openPic(i)); ++ if (i<numnames) return; + + loop = 1; /* back to top of list */ +- if (j) break; /* we're in a 'failure loop' */ ++ if (j) break; /* we're in a 'failure loop' */ + j++; + } + +@@ -3044,7 +3740,7 @@ int i; if (curname>0) i = curname-1; @@ -4119,25 +6346,51 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c i = nList.selected - 1; else i = numnames-1; -@@ -3089,7 +3116,7 @@ - loadList = (byte *) malloc((size_t) listLen); - for (k=0; k<listLen; k++) loadList[k] = 0; - } -- -+ - if (left_to_load <= 0) { /* we've loaded all the pics */ - for (k=0; k<listLen; k++) loadList[k] = 0; /* clear flags */ - left_to_load = listLen; -@@ -3097,7 +3124,7 @@ - } +@@ -3063,64 +3759,24 @@ + openPic(LOADPIC); + } - for (k=abs(random()) % listLen; loadList[k]; k = (k+1) % listLen); +- +- +- +-/****************/ +-static int findRandomPic() +-/****************/ +-{ +- static byte *loadList; +- static int left_to_load, listLen = -1; +- int k; +- time_t t; +- +- /* picks a random name out of the list, and returns it's index. If there +- are no more names to pick, it returns '-1' and resets itself */ +- +- if (!loadList || numnames!=listLen) { +- if (loadList) free(loadList); +- else { +- time(&t); +- srandom((unsigned int) t); /* seed the random */ +- } +- +- left_to_load = listLen = numnames; +- loadList = (byte *) malloc((size_t) listLen); +- for (k=0; k<listLen; k++) loadList[k] = 0; +- } - -+ - left_to_load--; - loadList[k] = TRUE; - -@@ -3107,13 +3134,13 @@ +- if (left_to_load <= 0) { /* we've loaded all the pics */ +- for (k=0; k<listLen; k++) loadList[k] = 0; /* clear flags */ +- left_to_load = listLen; +- return -1; /* 'done' return */ +- } +- +- for (k=abs(random()) % listLen; loadList[k]; k = (k+1) % listLen); +- +- left_to_load--; +- loadList[k] = TRUE; +- +- return k; +-} +- /****************/ static void mainLoop() { @@ -4154,7 +6407,17 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c selected file (or the 0th file, if no selection either), and 'Prev' means view the one right before the selected file */ -@@ -3133,7 +3160,7 @@ +- openFirstPic(); /* find first displayable picture, exit if none */ ++ /* find first displayable picture, exit if none */ ++ if (!startGrab) openFirstPic(); + + if (!pic) { /* must've opened a text file... display dflt pic */ +- openPic(DFLTPIC); ++ if (!startGrab) openPic(DFLTPIC); + if (mainW && !useroot) RaiseTextWindows(); + } + +@@ -3133,7 +3789,7 @@ } else if (i==PREVPIC) { @@ -4163,7 +6426,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c openPrevPic(); } -@@ -3151,7 +3178,7 @@ +@@ -3151,7 +3807,7 @@ else if (i==THISNEXT) { /* open current sel, 'next' until success */ int j; @@ -4172,13 +6435,68 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (j<0) j = 0; while (j<numnames && !openPic(j)); if (!pic) openPic(DFLTPIC); -@@ -3219,12 +3246,12 @@ +@@ -3169,7 +3825,7 @@ + + /***********************************/ + static void createMainWindow(geom, name) +- char *geom, *name; ++ const char *geom, *name; + { + XSetWindowAttributes xswa; + unsigned long xswamask; +@@ -3195,22 +3851,35 @@ + i = XParseGeometry(geom,&x,&y,&w,&h); + + hints.flags = 0; +- if ((i&XValue || i&YValue)) hints.flags = USPosition; ++ if (i&XValue || i&YValue) ++ hints.flags |= USPosition; + +- if (i&XValue && i&XNegative) x = vrWIDE - eWIDE - abs(x); +- if (i&YValue && i&YNegative) y = vrHIGH - eHIGH - abs(y); ++ hints.win_gravity = NorthWestGravity; ++ if (i&XValue && i&XNegative) { ++ hints.win_gravity = NorthEastGravity; ++ x = vrWIDE - (eWIDE + 2 * bwidth) - x; ++ } ++ if (i&YValue && i&YNegative) { ++ hints.win_gravity = (hints.win_gravity == NorthWestGravity) ? ++ SouthWestGravity : SouthEastGravity; ++ y = vrHIGH - (eHIGH + 2 * bwidth) - y; ++ } ++ hints.flags |= PWinGravity; + +- if (x+eWIDE > vrWIDE) x = vrWIDE - eWIDE; /* keep on screen */ ++ /* keep on screen */ ++ if (x+eWIDE > vrWIDE) x = vrWIDE - eWIDE; + if (y+eHIGH > vrHIGH) y = vrHIGH - eHIGH; +- ++ if (x < 0) x = 0; ++ if (y < 0) y = 0; + + #define VROOT_TRANS + #ifdef VROOT_TRANS +- if (vrootW != rootW) { /* virtual window manager running */ ++ if (vrootW != rootW && !(hints.flags & USPosition)) { /* virtual window manager running */ + int x1,y1; + Window child; ++ + XTranslateCoordinates(theDisp, rootW, vrootW, x, y, &x1, &y1, &child); +- if (DEBUG) fprintf(stderr,"translate: %d,%d -> %d,%d\n",x,y,x1,y1); ++ if (DEBUG) fprintf(stderr,"translate: %d,%d -> %d,%d\n", x, y, x1, y1); + x = x1; y = y1; + } + #endif +@@ -3218,13 +3887,13 @@ + hints.x = x; hints.y = y; hints.width = eWIDE; hints.height = eHIGH; hints.max_width = maxWIDE; hints.max_height = maxHIGH; - hints.flags |= USSize | PMaxSize; +- hints.flags |= USSize | PMaxSize; - +- xswa.bit_gravity = StaticGravity; ++ hints.flags |= PSize | PMaxSize; + - xswa.bit_gravity = StaticGravity; ++ xswa.bit_gravity = StaticGravity; xswa.background_pixel = bg; xswa.border_pixel = fg; xswa.colormap = theCmap; @@ -4187,7 +6505,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c xswa.backing_store = WhenMapped; /* NOTE: I've turned 'backing-store' off on the image window, as some -@@ -3233,9 +3260,9 @@ +@@ -3233,9 +3902,9 @@ improvement anyway (for the image window), unless you're on a slow network. In any event, I'm not *turning off* backing store, I'm just not explicitly turning it *on*. If your X server is set up @@ -4199,7 +6517,16 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c xswamask = CWBackPixel | CWBorderPixel | CWColormap /* | CWBackingStore */; if (!clearonload) xswamask |= CWBitGravity; -@@ -3251,11 +3278,11 @@ +@@ -3244,18 +3913,18 @@ + xwa.width = eWIDE; xwa.height = eHIGH; + + /* try to keep the damned thing on-screen, if possible */ +- if (xwa.x + xwa.width > dispWIDE) xwa.x = dispWIDE - xwa.width; +- if (xwa.y + xwa.height > dispHIGH) xwa.y = dispHIGH - xwa.height; ++ if (xwa.x + xwa.width > vrWIDE) xwa.x = vrWIDE - xwa.width; ++ if (xwa.y + xwa.height > vrHIGH) xwa.y = vrHIGH - xwa.height; + if (xwa.x < 0) xwa.x = 0; + if (xwa.y < 0) xwa.y = 0; SetWindowPos(&xwa); hints.flags = PSize | PMaxSize; @@ -4213,7 +6540,14 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c theVisual, xswamask, &xswa); if (!mainW) FatalError("can't create window!"); -@@ -3274,8 +3301,8 @@ +@@ -3267,15 +3936,11 @@ + } + } + +- +- XSetStandardProperties(theDisp,mainW,"","",None,NULL,0,&hints); +- setWinIconNames(name); +- xwmh.input = True; xwmh.flags = InputHint; @@ -4224,16 +6558,26 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c xwmh.flags |= (IconPixmapHint | IconMaskHint); -@@ -3302,7 +3329,7 @@ - XSetClassHint(theDisp, mainW, &classh); +@@ -3295,14 +3960,15 @@ + } + } + } +- XSetWMHints(theDisp, mainW, &xwmh); + + classh.res_name = "xv"; + classh.res_class = "XVroot"; +- XSetClassHint(theDisp, mainW, &classh); ++ XmbSetWMProperties(theDisp, mainW, NULL, NULL, NULL, 0, &hints, &xwmh, ++ &classh); ++ setWinIconNames(name); - if (nodecor) { /* turn of image window decorations (in MWM) */ + if (nodecor) { /* turn of image window decorations (in MWM) */ Atom mwm_wm_hints; struct s_mwmhints { long flags; -@@ -3311,7 +3338,7 @@ +@@ -3311,7 +3977,7 @@ u_long input_mode; long status; } mwmhints; @@ -4242,7 +6586,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c mwm_wm_hints = XInternAtom(theDisp, "_MOTIF_WM_HINTS", False); if (mwm_wm_hints != None) { xvbzero((char *) &mwmhints, sizeof(mwmhints)); -@@ -3319,13 +3346,13 @@ +@@ -3319,20 +3985,20 @@ mwmhints.decorations = 4; XChangeProperty(theDisp, mainW, mwm_wm_hints, mwm_wm_hints, 32, @@ -4259,8 +6603,22 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c firstTime = 0; } -@@ -3366,8 +3393,8 @@ - int *w, *h; + + /***********************************/ + static void setWinIconNames(name) +- char *name; ++ const char *name; + { + char winname[256], iconname[256]; + +@@ -3362,12 +4028,12 @@ + + /***********************************/ + void FixAspect(grow,w,h) +-int grow; +-int *w, *h; ++ int grow; ++ int *w, *h; { /* computes new values of eWIDE and eHIGH which will have aspect ratio - 'normaspect'. If 'grow' it will preserve aspect by enlarging, @@ -4270,7 +6628,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c Returns these values in 'w' and 'h' */ float xr,yr,curaspect,a,exp; -@@ -3380,14 +3407,14 @@ +@@ -3380,14 +4046,14 @@ curaspect = xr / yr; /* if too narrow & shrink, shrink height. too wide and grow, grow height */ @@ -4287,7 +6645,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c (curaspect > normaspect && !grow)) { /* modify width */ exp = normaspect / curaspect; *w = (int) (eWIDE * exp + .5); -@@ -3423,22 +3450,22 @@ +@@ -3423,22 +4089,22 @@ suffix = namelist[0]; prelen = 0; /* length of prefix to be removed */ n = i = 0; /* shut up pesky compiler warnings */ @@ -4315,7 +6673,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c dispnames[i] = namelist[i] + prelen; } -@@ -3447,20 +3474,20 @@ +@@ -3447,20 +4113,20 @@ static void fixDispNames() { /* fix dispnames array so that names don't go off right edge */ @@ -4340,7 +6698,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c tmp++; /* move to char following the '/' */ if (StringWidth(tmp) <= (nList.w-10-16)) { /* is cool now */ j++; break; -@@ -3484,9 +3511,9 @@ +@@ -3484,9 +4150,9 @@ name = GetDirFName(); GetDirPath(cwd); @@ -4352,8 +6710,12 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (select) { nList.selected = numnames-1; curname = numnames - 1; -@@ -3501,32 +3528,32 @@ - char *fpath, *fname; +@@ -3498,35 +4164,35 @@ + + /***********************************/ + void AddFNameToCtrlList(fpath,fname) +- char *fpath, *fname; ++ const char *fpath, *fname; { /* stick given path/name into 'namelist'. Doesn't redraw list */ - @@ -4395,7 +6757,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c sprintf(fullname, "%s%s", cwd, fname); } else { /* copy name to fullname */ -@@ -3534,15 +3561,15 @@ +@@ -3534,15 +4200,15 @@ if (!fullname) FatalError("couldn't alloc name in AddFNameToCtrlList()\n"); strcpy(fullname, fname); } @@ -4414,7 +6776,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c namelist[numnames] = fullname; numnames++; makeDispNames(); -@@ -3578,7 +3605,7 @@ +@@ -3578,7 +4244,7 @@ /* called to enable/disable the Prev/Next buttons whenever curname and/or numnames and/or nList.selected change */ @@ -4423,7 +6785,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c selected file (or the 0th file, if no selection either), and 'Prev' means view the one right before the selected file */ -@@ -3591,15 +3618,15 @@ +@@ -3591,18 +4257,19 @@ BTSetActive(&but[BPREV], (curname>0)); } } @@ -4441,8 +6803,20 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c + in which case the 'selected' filename on the ctrl list is now different, and should be auto-loaded, or something */ - static char *bnames[] = { "\004Disk File", "\nList Entry", "\033Cancel" }; -@@ -3616,9 +3643,9 @@ +- static char *bnames[] = { "\004Disk File", "\nList Entry", "\033Cancel" }; ++ static const char *bnames[] = ++ { "\004Disk File", "\nList Entry", "\033Cancel" }; + char str[512]; + int del, i, delnum, rv; + +@@ -3610,15 +4277,14 @@ + delnum = nList.selected; + if (delnum < 0 || delnum >= numnames) return 0; + +- sprintf(str,"Delete '%s'?\n\n%s%s", +- namelist[delnum], ++ sprintf(str, "Delete '%s'?\n\n%s%s", namelist[delnum], + "'List Entry' deletes selection from list.\n", "'Disk File' deletes file associated with selection."); del = PopUp(str, bnames, 3); @@ -4454,7 +6828,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (del == 0) { /* 'Disk File' */ char *name; if (namelist[delnum][0] != '/') { /* prepend 'initdir' */ -@@ -3669,13 +3696,13 @@ +@@ -3669,13 +4335,13 @@ if (delnum != numnames-1) { /* snip out of namelist and dispnames lists */ @@ -4471,7 +6845,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c numnames--; if (numnames==0) BTSetActive(&but[BDELETE],0); windowMB.dim[WMB_TEXTVIEW] = (numnames==0); -@@ -3686,7 +3713,7 @@ +@@ -3686,7 +4352,7 @@ if (nList.selected >= numnames) nList.selected = numnames-1; if (nList.selected < 0) nList.selected = 0; @@ -4480,7 +6854,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c nList.scrl.val, nList.nlines-1); ScrollToCurrent(&nList); DrawCtrlNumFiles(); -@@ -3753,7 +3780,7 @@ +@@ -3753,7 +4419,7 @@ if (useroot && resetroot) ClearRoot(); if (mainW == (Window) NULL || useroot) { /* window not visible */ @@ -4489,7 +6863,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (haveoldinfo) { /* just remap mainW and resize it */ XWMHints xwmh; -@@ -3771,8 +3798,8 @@ +@@ -3771,8 +4437,8 @@ xwmh.input = True; xwmh.flags = InputHint; @@ -4500,7 +6874,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c xwmh.flags |= ( IconPixmapHint | IconMaskHint) ; xwmh.flags |= StateHint; -@@ -3787,7 +3814,7 @@ +@@ -3787,7 +4453,7 @@ else { /* first time. need to create mainW */ mainW = (Window) NULL; createMainWindow(maingeom, fnam); @@ -4509,7 +6883,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c | StructureNotifyMask | ButtonPressMask | KeyReleaseMask | ColormapChangeMask | EnterWindowMask | LeaveWindowMask ); -@@ -3802,7 +3829,7 @@ +@@ -3802,7 +4468,7 @@ else { /* mainW already visible */ createMainWindow(maingeom, fnam); @@ -4518,7 +6892,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c | StructureNotifyMask | ButtonPressMask | KeyReleaseMask | ColormapChangeMask | EnterWindowMask | LeaveWindowMask ); -@@ -3845,13 +3872,13 @@ +@@ -3845,13 +4511,13 @@ if (LocalCmap) regen=1; /* this reallocs the colors */ @@ -4536,7 +6910,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (!ctrlUp) { /* make sure ctrl is up when going to 'root' mode */ XWMHints xwmh; xwmh.input = True; -@@ -3861,7 +3888,7 @@ +@@ -3861,7 +4527,7 @@ CtrlBox(1); } } @@ -4545,7 +6919,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c useroot = 1; rootMode = dispMode - RMB_ROOT; ew = eWIDE; eh = eHIGH; -@@ -3877,7 +3904,7 @@ +@@ -3877,7 +4543,7 @@ GenerateEpic(ew, eh); CreateXImage(); } @@ -4554,7 +6928,24 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c KillOldRootInfo(); MakeRootPic(); -@@ -3954,7 +3981,7 @@ +@@ -3923,7 +4589,7 @@ + + + if (*numn == maxn) { +- fprintf(stderr, "%s: too many filenames. Only using first %d.\n", ++ fprintf(stderr, "%s: too many filenames. Using only first %d.\n", + flist, maxn); + } + +@@ -3947,14 +4613,14 @@ + + /***********************************/ + int rd_int(name) +- char *name; ++ const char *name; + { + /* returns '1' if successful. result in def_int */ + if (rd_str_cl(name, "", 0)) { /* sets def_str */ if (sscanf(def_str, "%d", &def_int) == 1) return 1; else { @@ -4563,8 +6954,21 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c cmd, name); return 0; } -@@ -3976,14 +4003,14 @@ - char *name; +@@ -3965,7 +4631,7 @@ + + /***********************************/ + int rd_str(name) +- char *name; ++ const char *name; + { + return rd_str_cl(name, "", 0); + } +@@ -3973,17 +4639,17 @@ + + /***********************************/ + int rd_flag(name) +-char *name; ++ const char *name; { /* returns '1' if successful. result in def_int */ - @@ -4580,7 +6984,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c (strcmp(buf, "1")==0) || (strcmp(buf, "true")==0) || (strcmp(buf, "yes")==0); -@@ -3992,12 +4019,12 @@ +@@ -3992,16 +4658,16 @@ else return 0; } @@ -4594,27 +6998,53 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c + /***********************************/ int rd_str_cl (name_str, class_str, reinit) - char *name_str; -@@ -4044,14 +4071,14 @@ +- char *name_str; +- char *class_str; ++ const char *name_str; ++ const char *class_str; + int reinit; + { + /* note: *all* X resource reading goes through this routine... */ +@@ -4043,16 +4709,30 @@ + unsigned long nitems, nleft; byte *data; - i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), +- i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), - resAtom, 0L, 1L, False, - XA_STRING, &actType, &actFormat, &nitems, &nleft, -+ resAtom, 0L, 1L, False, -+ XA_STRING, &actType, &actFormat, &nitems, &nleft, - (unsigned char **) &data); +- (unsigned char **) &data); ++ if (spec_window) { ++ i = XGetWindowProperty(theDisp, spec_window, ++ resAtom, 0L, 1L, False, ++ XA_STRING, &actType, &actFormat, &nitems, &nleft, ++ (unsigned char **) &data); ++ } else { ++ i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), ++ resAtom, 0L, 1L, False, ++ XA_STRING, &actType, &actFormat, &nitems, &nleft, ++ (unsigned char **) &data); ++ } if (i==Success && actType==XA_STRING && actFormat==8) { if (nitems>0 && data) XFree(data); - i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), resAtom, 0L, -+ i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), resAtom, 0L, - (long) ((nleft+4+3)/4), +- (long) ((nleft+4+3)/4), - False, XA_STRING, &actType, &actFormat, -+ False, XA_STRING, &actType, &actFormat, - &nitems, &nleft, (unsigned char **) &data); +- &nitems, &nleft, (unsigned char **) &data); ++ if (spec_window) { ++ i = XGetWindowProperty(theDisp, spec_window, resAtom, 0L, ++ (long) ((nleft+4+3)/4), ++ False, XA_STRING, &actType, &actFormat, ++ &nitems, &nleft, (unsigned char **) &data); ++ } else { ++ i = XGetWindowProperty(theDisp, RootWindow(theDisp, 0), resAtom, 0L, ++ (long) ((nleft+4+3)/4), ++ False, XA_STRING, &actType, &actFormat, ++ &nitems, &nleft, (unsigned char **) &data); ++ } if (i==Success && actType==XA_STRING && actFormat==8 && data) { def_resource = XrmGetStringDatabase((char *) data); -@@ -4064,8 +4091,8 @@ + XFree(data); +@@ -4064,50 +4744,51 @@ if (!gotit) { @@ -4625,16 +7055,19 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (xrm_str) { def_resource = XrmGetStringDatabase(xrm_str); if (DEBUG) fprintf(stderr,"rd_str_cl: Using RESOURCE_MANAGER prop.\n"); -@@ -4073,7 +4100,7 @@ + } else { /* no RESOURCE_MANAGER prop. read from 'likely' file */ - char foo[256], *homedir, *xenviron; +- char foo[256], *homedir, *xenviron; ++ char foo[256], *xenviron; ++ const char *homedir; XrmDatabase res1; - + #ifdef VMS strcpy(foo, "SYS$LOGIN:DECW$XDEFAULTS.DAT"); #else -@@ -4081,33 +4108,33 @@ +- homedir = (char *) getenv("HOME"); ++ homedir = (const char *) getenv("HOME"); if (!homedir) homedir = "."; sprintf(foo,"%s/.Xdefaults", homedir); #endif @@ -4676,7 +7109,7 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c if (DEBUG) fprintf(stderr,"\n\n"); } } -@@ -4120,13 +4147,13 @@ +@@ -4120,16 +4801,15 @@ strcpy (q_name, PROGNAME); strcat (q_name, "."); strcat (q_name, name_str); @@ -4690,11 +7123,16 @@ diff -ruN xv-3.10a/xv.c xv-3.10a-bugfixes/xv.c - + def_str = result.addr; - if (def_str) return (1); - else return (0); -diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h +- if (def_str) return (1); +- else return (0); ++ if (def_str) return 1; ++ else return 0; + } + +- +diff -ru xv-3.10a/xv.h xv-3.10a-enhancements/xv.h --- xv-3.10a/xv.h 1995-01-23 12:22:23.000000000 -0800 -+++ xv-3.10a-bugfixes/xv.h 2005-04-10 09:37:18.000000000 -0700 ++++ xv-3.10a-enhancements/xv.h 2007-05-20 21:26:40.000000000 -0700 @@ -1,6 +1,6 @@ /* * xv.h - header file for xv, but you probably guessed as much @@ -4703,7 +7141,7 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h * Author: John Bradley (bradley@cis.upenn.edu) */ -@@ -8,8 +8,14 @@ +@@ -8,8 +8,16 @@ #include "config.h" @@ -4715,27 +7153,51 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h +/* GRR orig jumbo enhancements patch: 20000220 */ +/* GRR 1st public jumbo F+E patches: 20040531 */ +/* GRR 2nd public jumbo F+E patches: 20050410 */ -+#define REVDATE "version 3.10a-jumboFix of 20050410" -+#define VERSTR "3.10a-20050410" ++/* GRR 3rd public jumbo F+E patches: 20050501 */ ++/* GRR 4th public jumbo F+E patch: 20070520 */ ++#define REVDATE "version 3.10a-jumboFix+Enh of 20070520" ++#define VERSTR "3.10a-20070520" /* * uncomment the following, and modify for your site, but only if you've -@@ -62,15 +68,27 @@ - #endif +@@ -43,6 +51,10 @@ + /* START OF MACHINE-DEPENDENT CONFIGURATION INFO */ + /*************************************************/ ++ ++#define ENABLE_FIXPIX_SMOOTH /* GRR 19980607 */ ++ ++ + /* Things to make xv more likely to just build, without the user tweaking + the makefile */ --#ifdef LINUX +@@ -61,16 +73,38 @@ + # define SVR4 + #endif + ++#if defined(__sony_news) && defined(bsd43) && !defined(__bsd43) ++# define __bsd43 ++#elif defined(__sony_news) && (defined(SYSTYPE_BSD) || defined(__SYSTYPE_BSD)) && !defined(bsd43) && !defined(__bsd43) ++# define bsd43 ++# define __bsd43 ++#endif ++ ++#include <signal.h> /* for interrupt handling */ ++ +/* at least on Linux, the following file (1) includes sys/types.h and + * (2) defines __USE_BSD (which was not defined before here), so __linux__ + * block is now moved after this #include */ +#include <X11/Xos.h> /* need type declarations immediately */ + -+ + +-#ifdef LINUX +#ifdef __linux__ # ifndef _LINUX_LIMITS_H # include <linux/limits.h> # endif -+# define USLEEP ++# ifndef USLEEP ++# define USLEEP ++# endif + /* want only one or the other defined, not both: */ +# if !defined(BSDTYPES) && !defined(__USE_BSD) +# define BSDTYPES @@ -4751,13 +7213,34 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h /*********************************************************/ -@@ -115,17 +133,21 @@ +@@ -99,6 +133,16 @@ + #endif + + ++#if defined(__sony_news) && defined(__bsd43) ++# include <unistd.h> ++#endif ++ ++ ++#if defined(__FreeBSD__) ++# include <sys/param.h> ++#endif ++ ++ + /* include files */ + #include <stdio.h> + #include <math.h> +@@ -114,18 +158,24 @@ + #ifndef VMS # include <errno.h> - extern int errno; /* SHOULD be in errno.h, but often isn't */ --# ifndef __NetBSD__ -+# if !defined(__NetBSD__) && !(defined(__linux__) && defined(__USE_BSD)) - extern char *sys_errlist[]; /* this too... */ +- extern int errno; /* SHOULD be in errno.h, but often isn't */ + # ifndef __NetBSD__ +- extern char *sys_errlist[]; /* this too... */ ++# if !(defined __GLIBC__ && __GLIBC__ >= 2) ++ extern int errno; /* SHOULD be in errno.h, but often isn't */ ++ extern char *sys_errlist[]; /* this too... */ ++# endif # endif #endif @@ -4777,18 +7260,60 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h #endif -@@ -159,7 +181,9 @@ - !defined(bsd43) && \ - !defined(aux) && \ - !defined(__bsdi__) && \ -- !defined(sequent) -+ !defined(sequent) && \ -+ !defined(__FreeBSD__) && \ -+ !defined(__OpenBSD__) +@@ -146,28 +196,20 @@ + #endif + +-/* lots of things don't have <malloc.h> */ +-/* A/UX systems include it from stdlib, from Xos.h */ +-#ifndef VMS /* VMS hates multi-line '#if's */ +-# if !defined(ibm032) && \ +- !defined(__convex__) && \ +- !(defined(vax) && !defined(ultrix)) && \ +- !defined(mips) && \ +- !defined(apollo) && \ +- !defined(pyr) && \ +- !defined(__UMAXV__) && \ +- !defined(bsd43) && \ +- !defined(aux) && \ +- !defined(__bsdi__) && \ +- !defined(sequent) +- ++/* GRR 20070512: Very few modern systems even have a malloc.h anymore; ++ * stdlib.h is, well, the standard. (Former explicitly listed ++ * "don't include" systems: ibm032, __convex__, non-ultrix vax, ++ * mips, apollo, pyr, sequent, __UMAXV__, aux, bsd43, __bsd43, ++ * __bsdi__, __386BSD__, __FreeBSD__, __OpenBSD__, __NetBSD__, ++ * __DARWIN__, VMS.) Anyone who _does_ need it can explicitly ++ * define NEED_MALLOC_H in the makefile. */ ++#ifdef NEED_MALLOC_H # if defined(hp300) || defined(hp800) || defined(NeXT) - # include <sys/malloc.h> /* it's in 'sys' on HPs and NeXT */ -@@ -205,6 +229,10 @@ +-# include <sys/malloc.h> /* it's in 'sys' on HPs and NeXT */ ++# include <sys/malloc.h> /* it's in "sys" on HPs and NeXT */ + # else +-# include <malloc.h> ++# include <malloc.h> + # endif +-# endif +-#endif /* !VMS */ ++#endif + + + +@@ -179,9 +221,10 @@ + #include <X11/Xatom.h> + #include <X11/Xmd.h> + ++#ifdef TV_L10N ++# include <X11/Xlocale.h> ++#endif + +-#undef SIGCHLD /* defined in both Xos.h and signal.h */ +-#include <signal.h> /* for interrupt handling */ + + #include <sys/types.h> + +@@ -205,6 +248,10 @@ # include <limits.h> # endif @@ -4799,7 +7324,7 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h /*** for select() call ***/ # ifdef __hpux # define XV_FDTYPE (int *) -@@ -259,7 +287,7 @@ +@@ -259,7 +306,7 @@ * make them if missing, along with a few fictitious ones * Cameron Simpson (cameron@cse.unsw.edu.au) */ @@ -4808,7 +7333,18 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h #ifndef S_ISDIR /* missing POSIX-type macros */ # define S_ISDIR(mode) (((mode)&S_IFMT) == S_IFDIR) # define S_ISBLK(mode) (((mode)&S_IFMT) == S_IFBLK) -@@ -308,10 +336,18 @@ +@@ -288,7 +335,9 @@ + # endif + #endif + +- ++#ifndef S_IRWUSR ++# define S_IRWUSR (S_IRUSR|S_IWUSR) /* or (S_IREAD|S_IWRITE) */ ++#endif + + #ifndef MAXPATHLEN + # define MAXPATHLEN 256 +@@ -308,36 +357,90 @@ #ifndef VMS /* VMS hates multi-line definitions */ # if defined(SVR4) || defined(SYSV) || defined(sco) || \ @@ -4816,30 +7352,73 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h + defined(XENIX) || defined(__osf__) || defined(__linux__) # undef USE_GETCWD # define USE_GETCWD /* use 'getcwd()' instead of 'getwd()' */ --# endif +# endif /* >> SECURITY ISSUE << */ +#endif + + -+/* GRR 20040430: This is new and still only partially implemented. No doubt -+ * there are many other systems that have mkstemp() (SUSv3), -+ * but let's start small... */ -+#if defined(__linux__) || defined(__OpenBSD__) -+# define USE_MKSTEMP /* use 'mkstemp()' instead of 'mktemp()' */ ++/* GRR 20040430: This is new and still not fully deployed. No doubt there ++ * are other systems that have mkstemp() (SUSv3); we can add ++ * them later. */ ++#ifndef VMS /* VMS hates multi-line definitions */ ++# if defined(__linux__) || defined(__OpenBSD__) || defined(__NetBSD__) || \ ++ defined(__bsdi__) ++# ifndef USE_MKSTEMP ++# define USE_MKSTEMP /* use 'mkstemp()' instead of 'mktemp()' */ ++# endif /* >> SECURITY ISSUE << */ + # endif #endif -@@ -320,15 +356,15 @@ ++/* GRR 20040503: This is new and so far tested only under Linux. But it ++ * allows -wait to work with subsecond values as long as ++ * times() exists and clock_t is a long int (latter matters ++ * only if/when clocks wrap, which for Linux is multiples of ++ * 497.11 days since the last reboot). */ ++#if defined(__linux__) ++# define USE_TICKS /* use times()/Timer(), not time()/sleep() */ ++# include <limits.h> /* LONG_MAX (really want CLOCK_T_MAX) */ ++# include <sys/times.h> /* times() */ ++# ifndef CLK_TCK /* can be undefined in strict-ANSI mode */ ++# define CLK_TCK CLOCKS_PER_SEC /* claimed to be same thing in time.h */ ++# endif ++#endif ++ ++#if (defined(SYSV) || defined(SVR4) || defined(linux)) && !defined(USE_GETCWD) ++# define USE_GETCWD ++#endif ++ ++#ifndef SEEK_SET ++# define SEEK_SET 0 ++# define SEEK_CUR 1 ++# define SEEK_END 2 ++#endif ++ ++#if defined(__mips) && defined(__SYSTYPE_BSD43) ++# define strstr(A,B) pds_strstr((A),(B)) ++# undef S_IFIFO ++#endif /* !mips_bsd */ ++ + /*****************************/ + /* END OF CONFIGURATION INFO */ /*****************************/ ++ #ifdef DOJPEG -#define HAVE_JPEG +# define HAVE_JPEG ++#endif ++ ++#ifdef DOJP2K ++# define HAVE_JP2K #endif #ifdef DOTIFF -#define HAVE_TIFF +# define HAVE_TIFF ++#endif ++ ++#ifdef DOPNG ++# define HAVE_PNG #endif #ifdef DOPDS @@ -4847,17 +7426,166 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h +# define HAVE_PDS #endif ++#ifdef DOG3 ++# define HAVE_G3 ++#endif + + +-#define PROGNAME "xv" /* used in resource database */ ++#define PROGNAME "xv" /* used in resource database */ + +-#define MAXNAMES 4096 /* max # of files in ctrlW list */ ++#define MAXNAMES 65536 /* max # of files in ctrlW list */ -@@ -442,7 +478,7 @@ +-#define MAXBRWIN 4 /* max # of vis browser windows */ ++#define MAXBRWIN 16 /* max # of vis browser windows */ - /* following list gives indicies into 'saveFormats[]' array in xvdir.c - note that JPEG and TIFF entries may or may not exist, and following + /* strings in the INFOBOX (used in SetISTR and GetISTR) */ + #define NISTR 10 /* number of ISTRs */ +@@ -432,7 +535,7 @@ + #define F_COLORS 0 + #define F_FORMAT 1 + +-/* the following list give indicies into saveColors[] array in xvdir.c */ ++/* the following list give indices into saveColors[] array in xvdir.c */ + #define F_FULLCOLOR 0 + #define F_GREYSCALE 1 + #define F_BWDITHER 2 +@@ -440,49 +543,115 @@ + #define F_MAXCOLORS 4 /* length of saveColors[] array */ + + +-/* following list gives indicies into 'saveFormats[]' array in xvdir.c +- note that JPEG and TIFF entries may or may not exist, and following - constants have to be adjusted accordingly. Also, don't worry about -+ constants have to be adjusted accordingly. Also, don't worry about - duplicate cases if JPGINC or TIFINC = 0. All code that references - F_JPEG or F_TIFF is #ifdef'd, so it won't be a problem */ +- duplicate cases if JPGINC or TIFINC = 0. All code that references +- F_JPEG or F_TIFF is #ifdef'd, so it won't be a problem */ ++/* The following list gives indices into 'saveFormats[]' array in xvdir.c. ++ Note that JPEG, TIFF, and other entries may or may not exist, so the ++ following constants have to be adjusted accordingly. Also, don't worry ++ about duplicate cases if, e.g., JPGINC or TIFINC = 0. All code that ++ references F_JPEG, F_TIFF, etc., is #ifdef'd, so it won't be a problem. */ + + #ifdef HAVE_JPEG +-#define F_JPGINC 1 ++# define F_JPGINC 1 + #else +-#define F_JPGINC 0 ++# define F_JPGINC 0 ++#endif ++ ++#ifdef HAVE_JP2K ++# define F_JP2INC 1 /* provides both JPC and JP2 */ ++#else ++# define F_JP2INC 0 + #endif + + #ifdef HAVE_TIFF +-#define F_TIFINC 1 ++# define F_TIFINC 1 ++#else ++# define F_TIFINC 0 ++#endif ++ ++#ifdef HAVE_PNG ++# define F_PNGINC 1 ++#else ++# define F_PNGINC 0 ++#endif ++ ++#ifdef HAVE_MAG ++# define F_MAGINC 1 ++#else ++# define F_MAGINC 0 ++#endif ++ ++#ifdef HAVE_PIC ++# define F_PICINC 1 ++#else ++# define F_PICINC 0 ++#endif ++ ++#ifdef HAVE_MAKI ++# define F_MAKINC 1 ++#else ++# define F_MAKINC 0 ++#endif ++ ++#ifdef HAVE_PI ++# define F_PAIINC 1 ++#else ++# define F_PAIINC 0 ++#endif ++ ++#ifdef HAVE_PIC2 ++# define F_PC2INC 1 + #else +-#define F_TIFINC 0 ++# define F_PC2INC 0 + #endif + ++#ifdef HAVE_MGCSFX ++# define F_MGCSFXINC 1 ++#else ++# define F_MGCSFXINC 0 ++#endif + +-#define F_GIF 0 +-#define F_JPEG ( 0 + F_JPGINC) +-#define F_TIFF ( 0 + F_JPGINC + F_TIFINC) +-#define F_PS ( 1 + F_JPGINC + F_TIFINC) +-#define F_PBMRAW ( 2 + F_JPGINC + F_TIFINC) +-#define F_PBMASCII ( 3 + F_JPGINC + F_TIFINC) +-#define F_XBM ( 4 + F_JPGINC + F_TIFINC) +-#define F_XPM ( 5 + F_JPGINC + F_TIFINC) +-#define F_BMP ( 6 + F_JPGINC + F_TIFINC) +-#define F_SUNRAS ( 7 + F_JPGINC + F_TIFINC) +-#define F_IRIS ( 8 + F_JPGINC + F_TIFINC) +-#define F_TARGA ( 9 + F_JPGINC + F_TIFINC) +-#define F_FITS (10 + F_JPGINC + F_TIFINC) +-#define F_PM (11 + F_JPGINC + F_TIFINC) +-#define F_DELIM1 (12 + F_JPGINC + F_TIFINC) /* ----- */ +-#define F_FILELIST (13 + F_JPGINC + F_TIFINC) +-#define F_MAXFMTS (14 + F_JPGINC + F_TIFINC) /* 15, normally */ ++#ifdef MACBINARY ++# define MACBSIZE 128 ++#endif ++ ++/* NOTE: order must match saveFormats[] in xvdir.c */ ++/* [this works best when first one is always present, but...we like PNG :-) ] */ ++#define F_PNG 0 ++#define F_JPEG ( 0 + F_PNGINC) ++#define F_JPC ( 0 + F_PNGINC + F_JPGINC) ++#define F_JP2 ( 0 + F_PNGINC + F_JPGINC + F_JP2INC) ++#define F_GIF ( 0 + F_PNGINC + F_JPGINC + F_JP2INC + F_JP2INC) /* always avail; index varies */ ++#define F_TIFF ( 0 + F_PNGINC + F_JPGINC + F_JP2INC + F_JP2INC + F_TIFINC) ++#define F_PS ( 1 + F_TIFF) ++#define F_PBMRAW ( 2 + F_TIFF) ++#define F_PBMASCII ( 3 + F_TIFF) ++#define F_XBM ( 4 + F_TIFF) ++#define F_XPM ( 5 + F_TIFF) ++#define F_BMP ( 6 + F_TIFF) ++#define F_SUNRAS ( 7 + F_TIFF) ++#define F_IRIS ( 8 + F_TIFF) ++#define F_TARGA ( 9 + F_TIFF) ++#define F_FITS (10 + F_TIFF) ++#define F_PM (11 + F_TIFF) ++#define F_ZX (12 + F_TIFF) /* [JCE] */ ++#define F_WBMP (13 + F_TIFF) ++#define JP_EXT_F (F_WBMP) ++#define F_MAG (JP_EXT_F + F_MAGINC) ++#define F_PIC (JP_EXT_F + F_MAGINC + F_PICINC) ++#define F_MAKI (JP_EXT_F + F_MAGINC + F_PICINC + F_MAKINC) ++#define F_PI (JP_EXT_F + F_MAGINC + F_PICINC + F_MAKINC + F_PAIINC) ++#define F_PIC2 (JP_EXT_F + F_MAGINC + F_PICINC + F_MAKINC + F_PAIINC + F_PC2INC) ++#define F_MGCSFX (JP_EXT_F + F_MAGINC + F_PICINC + F_MAKINC + F_PAIINC + F_PC2INC + F_MGCSFXINC) ++#define JP_EXT_F_END (F_MGCSFX) ++#define F_DELIM1 (JP_EXT_F_END + 1) /* ----- */ ++#define F_FILELIST (JP_EXT_F_END + 2) ++#define F_MAXFMTS (JP_EXT_F_END + 3) /* 27, normally (with all formats) */ + + -@@ -482,7 +518,7 @@ /* return values from ReadFileType() * positive values are *definitely* readable formats (HAVE_*** is defined) * negative values are random files that XV can't read, but display as @@ -4866,7 +7594,81 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h */ #define RFT_ERROR -1 /* couldn't open file, or whatever... */ #define RFT_UNKNOWN 0 -@@ -742,7 +778,7 @@ +@@ -505,6 +674,22 @@ + #define RFT_XPM 17 + #define RFT_XWD 18 + #define RFT_FITS 19 ++#define RFT_PNG 20 ++#define RFT_ZX 21 /* [JCE] */ ++#define RFT_WBMP 22 ++#define RFT_PCD 23 ++#define RFT_HIPS 24 ++#define RFT_BZIP2 25 ++#define RFT_JPC 26 ++#define RFT_JP2 27 ++#define RFT_G3 28 ++#define JP_EXT_RFT (RFT_G3) ++#define RFT_MAG (JP_EXT_RFT + 1) ++#define RFT_MAKI (JP_EXT_RFT + 2) ++#define RFT_PIC (JP_EXT_RFT + 3) ++#define RFT_PI (JP_EXT_RFT + 4) ++#define RFT_PIC2 (JP_EXT_RFT + 5) ++#define RFT_MGCSFX (JP_EXT_RFT + 6) + + /* definitions for page up/down, arrow up/down list control */ + #define LS_PAGEUP 0 +@@ -563,7 +748,8 @@ + #define RM_CBRICK 7 /* centered on a 'brick' bg */ + #define RM_ECENTER 8 /* symmetrical tiled */ + #define RM_ECMIRR 9 /* symmetrical mirror tiled */ +-#define RM_MAX RM_ECMIRR ++#define RM_UPLEFT 10 /* just in upper left corner */ ++#define RM_MAX RM_UPLEFT + + + /* values of colorMapMode */ +@@ -613,10 +799,11 @@ + #define RMB_CBRICK 8 + #define RMB_ECENTER 9 + #define RMB_ECMIRR 10 +-#define RMB_MAX 11 ++#define RMB_UPLEFT 11 ++#define RMB_MAX 12 + + +-/* indicies into conv24MB */ ++/* indices into conv24MB */ + #define CONV24_8BIT 0 + #define CONV24_24BIT 1 + #define CONV24_SEP1 2 +@@ -631,7 +818,7 @@ + #define PIC8 CONV24_8BIT + #define PIC24 CONV24_24BIT + +-/* indicies into algMB */ ++/* indices into algMB */ + #define ALG_NONE 0 + #define ALG_SEP1 1 /* separator */ + #define ALG_BLUR 2 +@@ -648,7 +835,7 @@ + #define ALG_MAX 13 + + +-/* indicies into sizeMB */ ++/* indices into sizeMB */ + #define SZMB_NORM 0 + #define SZMB_MAXPIC 1 + #define SZMB_MAXPECT 2 +@@ -663,7 +850,7 @@ + #define SZMB_INTEXP 11 + #define SZMB_MAX 12 + +-/* indicies into windowMB */ ++/* indices into windowMB */ + #define WMB_BROWSE 0 + #define WMB_COLEDIT 1 + #define WMB_INFO 2 +@@ -742,15 +929,15 @@ typedef unsigned char byte; @@ -4875,7 +7677,199 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h Window win; /* window ID */ int x,y,w,h; /* window coords in parent */ int len; /* length of major axis */ -@@ -972,12 +1008,12 @@ + int vert; /* true if vertical, else horizontal */ + int active; /* true if scroll bar can do anything*/ +- int min,max; /* min/max values 'pos' can take */ +- int val; /* 'value' of scrollbar */ +- int page; /* amt val change on pageup/pagedown */ ++ double min,max; /* min/max values 'pos' can take */ ++ double val; /* 'value' of scrollbar */ ++ double page; /* amt val change on pageup/pagedown */ + int tpos; /* thumb pos. (pixels from tmin) */ + int tmin,tmax; /* min/max thumb offsets (from 0,0) */ + int tsize; /* size of thumb (in pixels) */ +@@ -765,11 +952,12 @@ + typedef struct { Window win; /* window ID */ + int x,y,w,h; /* window coords in parent */ + int active; /* true if can do anything*/ +- int min,max; /* min/max values 'pos' can take */ +- int val; /* 'value' of dial */ +- int page; /* amt val change on pageup/pagedown */ +- char *title; /* title for this guage */ +- char *units; /* string appended to value */ ++ double min,max; /* min/max values 'pos' can take */ ++ double val; /* 'value' of dial */ ++ double inc; /* amt val change on up/down */ ++ double page; /* amt val change on pageup/pagedown */ ++ const char *title; /* title for this gauge */ ++ const char *units; /* string appended to value */ + u_long fg,bg,hi,lo; /* colors */ + int rad, cx, cy; /* internals */ + int bx[4], by[4]; /* more internals */ +@@ -785,7 +973,7 @@ + int active; /* if false, stipple gray */ + int toggle; /* if true, clicking toggles state */ + u_long fg,bg,hi,lo; /* colors */ +- char *str; /* string in button */ ++ const char *str; /* string in button */ + Pixmap pix; /* use pixmap instead of string */ + u_int pw,ph; /* size of pixmap */ + int colorpix; /* multi-color pixmap */ +@@ -797,21 +985,23 @@ + typedef struct rbutt { + Window win; /* parent window */ + int x,y; /* position in parent */ +- char *str; /* the message string */ ++ const char *str; /* the message string */ + int selected; /* selected or not */ + int active; /* selectable? */ + struct rbutt *next; /* pointer to next in group */ +- u_long fg,bg,hi,lo; /* colors */ ++ u_long fg,bg; /* colors */ ++ u_long hi,lo; /* colors */ + } RBUTT; + + + + typedef struct { Window win; /* parent window */ + int x,y; /* position in parent */ +- char *str; /* the message string */ ++ const char *str; /* the message string */ + int val; /* 1=selected, 0=not */ + int active; /* selectable? */ +- u_long fg,bg,hi,lo; /* colors */ ++ u_long fg,bg; /* colors */ ++ u_long hi,lo; /* colors */ + } CBUTT; + + +@@ -819,11 +1009,11 @@ + typedef struct { Window win; /* parent window */ + int x,y; /* position in parent */ + unsigned int w,h; +- char *title; /* title string in norm state */ ++ const char *title; /* title string in norm state */ + int active; /* selectable? */ +- char **list; /* list of strings in menu */ ++ const char **list; /* list of strings in menu */ + int nlist; /* # of strings in menu */ +- byte flags[MAXMBLEN]; /* checkmarks on items */ ++ byte flags[MAXMBLEN]; /* checkmarks on items */ + int hascheck; /* leave room for checkmark? */ + byte dim[MAXMBLEN]; /* dim individual choices */ + Pixmap pix; /* use pixmap instd of string */ +@@ -833,17 +1023,18 @@ + } MBUTT; + + +-typedef struct { Window win; /* window */ +- int x,y; /* size of window */ ++typedef struct { Window win; /* window */ ++ int x,y; /* size of window */ + unsigned int w,h; +- u_long fg,bg,hi,lo; /* colors */ +- char **str; /* ptr to list of strings */ +- int nstr; /* number of strings */ +- int selected; /* number of 'selected' string */ +- int nlines; /* number of lines shown at once */ +- SCRL scrl; /* scrollbar that controls list */ +- int filetypes; /* true if filetype icons to be drawn*/ +- int dirsonly; /* if true, only dirs selectable */ ++ u_long fg,bg; /* colors */ ++ u_long hi,lo; /* colors */ ++ /* const? */ char **str; /* ptr to list of strings */ ++ int nstr; /* number of strings */ ++ int selected; /* number of 'selected' string */ ++ int nlines; /* number of lines shown at once */ ++ SCRL scrl; /* scrollbar that controls list */ ++ int filetypes; /* true if filetype icons to be drawn*/ ++ int dirsonly; /* if true, only dirs selectable */ + } LIST; + + +@@ -865,6 +1056,9 @@ + char shrtInfo[128]; /* short format info */ + char *comment; /* comment text */ + ++ byte *exifInfo; /* image info from digicam */ ++ int exifInfoSize; /* size of image info */ ++ + int numpages; /* # of page files, if >1 */ + char pagebname[64]; /* basename of page files */ + } PICINFO; +@@ -881,18 +1075,18 @@ + + #define GVMAX 8 + +-typedef struct { Window win; /* window ID */ +- Window gwin; /* graph subwindow */ +- int spline; /* spline curve or lines? */ +- int entergamma; /* currently entering gamma value */ +- int gammamode; /* currently using gamma function */ +- double gamma; /* gamma value (if gammamode) */ +- int nhands; /* current # of handles */ +- XPoint hands[MAX_GHANDS]; /* positions of handles */ +- byte func[256]; /* output function of GRAF */ +- BUTT butts[N_GFB]; /* control buttons */ +- u_long fg,bg; /* colors */ +- char *str; /* title string */ ++typedef struct { Window win; /* window ID */ ++ Window gwin; /* graph subwindow */ ++ int spline; /* spline curve or lines? */ ++ int entergamma; /* currently entering gamma value */ ++ int gammamode; /* currently using gamma function */ ++ double gamma; /* gamma value (if gammamode) */ ++ int nhands; /* current # of handles */ ++ XPoint hands[MAX_GHANDS]; /* positions of handles */ ++ byte func[256]; /* output function of GRAF */ ++ BUTT butts[N_GFB]; /* control buttons */ ++ u_long fg,bg; /* colors */ ++ const char *str; /* title string */ + char gvstr[GVMAX+1]; /* gamma value input string */ + void (*drawobj)PARM((void)); + } GRAF; +@@ -932,18 +1126,23 @@ + /* X stuff */ + WHERE Display *theDisp; + WHERE int theScreen; +-WHERE unsigned int ncells, dispWIDE, dispHIGH, dispDEEP; +-WHERE unsigned int vrWIDE, vrHIGH, maxWIDE, maxHIGH; ++WHERE unsigned int ncells, dispDEEP; /* root color sizes */ ++WHERE unsigned int dispWIDE, dispHIGH; /* screen sizes */ ++WHERE unsigned int vrWIDE, vrHIGH, maxWIDE, maxHIGH; /* virtual root and max image sizes */ + WHERE Colormap theCmap, LocalCmap; +-WHERE Window rootW, mainW, vrootW; ++WHERE Window spec_window, rootW, mainW, vrootW; + WHERE GC theGC; + WHERE u_long black, white, fg, bg, infofg, infobg; + WHERE u_long hicol, locol; + WHERE u_long blkRGB, whtRGB; + WHERE Font mfont, monofont; + WHERE XFontStruct *mfinfo, *monofinfo; ++#ifdef TV_L10N ++WHERE XFontSet monofset; ++WHERE XFontSetExtents *monofsetinfo; ++#endif + WHERE Visual *theVisual; +-WHERE Cursor arrow, cross, tcross, zoom, inviso; ++WHERE Cursor arrow, cross, tcross, zoom, inviso, tlcorner; + WHERE Pixmap iconPix, iconmask; + WHERE Pixmap riconPix, riconmask; + WHERE int showzoomcursor; +@@ -959,6 +1158,12 @@ + WHERE char formatStr[80]; /* short-form 'file format' */ + WHERE int picType; /* CONV24_8BIT,CONV24_24BIT,etc.*/ + WHERE char *picComments; /* text comments on current pic */ ++WHERE byte *picExifInfo; /* image info from digicam */ ++WHERE int picExifInfoSize; /* size of image info */ ++ ++#ifdef TV_L10N ++WHERE int xlocale; /* true if Xlib supports locale */ ++#endif + + WHERE int numPages, curPage; /* for multi-page files */ + WHERE char pageBaseName[64]; /* basename for multi-page files */ +@@ -972,12 +1177,12 @@ /* this is converted to 'theImage' */ WHERE int eWIDE, eHIGH; /* size of epic */ @@ -4890,8 +7884,86 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h kludge_offy; WHERE int winCtrPosKludge; /* kludge for popup positioning... */ -@@ -1072,7 +1108,7 @@ - WHERE int autoDelete; /* delete cmd-line files on exit? */ +@@ -993,6 +1198,26 @@ + WHERE unsigned long cols[256]; /* maps pic pixel values to X pixel vals */ + WHERE int fc2pcol[256]; /* maps freecols into pic pixel values */ + WHERE int numcols; /* # of desired colors in picture */ ++#ifdef MACBINARY ++WHERE char macb_file; /* True if this file type is MacBinary */ ++WHERE int handlemacb; /* True if we want to handle MacBinary */ ++#endif ++#if defined(HAVE_PIC) || defined(HAVE_PIC2) ++WHERE int nopicadjust; /* True if we don't want to adjust aspect */ ++#endif ++#ifdef HAVE_PIC2 ++WHERE int pic2split; /* True if we want to split multiblocks */ ++#endif ++#ifdef VS_ADJUST ++WHERE int vsadjust; /* True if we want to adjust aspect of icons */ ++#endif ++#ifdef HAVE_MGCSFX ++WHERE int mgcsfx; /* True if we want to force use MgcSfx */ ++WHERE int nomgcsfx; /* True if we don't want to use MgcSfx */ ++#endif ++ ++#define FSTRMAX 12 /* Number of function keys to support. */ ++WHERE char *fkeycmds[FSTRMAX]; /* command to run when F# is pressed */ + + /* Std Cmap stuff */ + WHERE byte stdr[256], stdg[256], stdb[256]; /* std 3/3/2 cmap */ +@@ -1025,7 +1250,7 @@ + + WHERE int ncols; /* max # of (different) colors to alloc */ + +-WHERE char str[128]; /* dummy string used for error messages */ ++WHERE char dummystr[128]; /* dummy string used for error messages */ + WHERE char initdir[MAXPATHLEN]; /* cwd when xv was started */ + WHERE char searchdir[MAXPATHLEN]; /* '-dir' option */ + WHERE char fullfname[MAXPATHLEN]; /* full name of current file */ +@@ -1047,42 +1272,47 @@ + noFreeCols, /* don't free colors when loading new pic */ + autoquit, /* quit in '-root' or when click on win */ + xerrcode, /* errorcode of last X error */ +- grabDelay; /* # of seconds to sleep at start of Grab */ ++ grabDelay, /* # of seconds to sleep at start of Grab */ ++ startGrab; /* start immediate grab ? */ + + WHERE int state824; /* displays warning when going 8->24 */ + + WHERE float defaspect, /* default aspect ratio to use */ + normaspect; /* normal aspect ratio of this picture */ + +-WHERE unsigned long rootbg, rootfg; /* fg/bg for root border */ +-WHERE int waitsec; /* secs btwn pics. -1=wait for event */ +-WHERE int waitloop; /* loop at end of slide show? */ +-WHERE int automax; /* maximize pic on open */ +-WHERE int rootMode; /* mode used for -root images */ ++WHERE u_long rootbg, rootfg; /* fg/bg for root border */ ++WHERE u_short imagebgR; ++WHERE u_short imagebgG; /* GRR 19980308: bg for transpar. images */ ++WHERE u_short imagebgB; ++WHERE int have_imagebg; ++WHERE double waitsec; /* secs btwn pics. -1.0=wait for event */ ++WHERE int waitloop; /* loop at end of slide show? */ ++WHERE int automax; /* maximize pic on open */ ++WHERE int rootMode; /* mode used for -root images */ + +-WHERE int nostat; /* if true, don't stat() in LdCurDir */ ++WHERE int nostat; /* if true, don't stat() in LdCurDir */ + +-WHERE int ctrlColor; /* whether or not to use colored butts */ ++WHERE int ctrlColor; /* whether or not to use colored butts */ + +-WHERE char *def_str; /* used by rd_*() routines */ ++WHERE char *def_str; /* used by rd_*() routines */ + WHERE int def_int; +-WHERE char *tmpdir; /* equal to "/tmp" or $TMPDIR env var */ +-WHERE Pixmap gray25Tile, /* used for 3d effect on 1-bit disp's */ ++WHERE char *tmpdir; /* equal to "/tmp" or $TMPDIR env var */ ++WHERE Pixmap gray25Tile, /* used for 3d effect on 1-bit disp's */ + gray50Tile; +-WHERE int autoDelete; /* delete cmd-line files on exit? */ ++WHERE int autoDelete; /* delete cmd-line files on exit? */ #define PRINTCMDLEN 256 -WHERE char printCmd[PRINTCMDLEN]; @@ -4899,92 +7971,431 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h /* stuff used for 'info' box */ WHERE Window infoW; -@@ -1135,7 +1171,7 @@ +-WHERE int infoUp; /* boolean: whether infobox is visible */ ++WHERE int infoUp; /* boolean: whether infobox is visible */ + WHERE int infoMode; + + + /* stuff used for 'ctrl' box */ + WHERE Window ctrlW; +-WHERE int ctrlUp; /* boolean: whether ctrlbox is visible */ ++WHERE int ctrlUp; /* boolean: whether ctrlbox is visible */ + WHERE char *namelist[MAXNAMES]; /* list of file names from argv */ + WHERE char *origlist[MAXNAMES]; /* only names from argv (autoDelete)*/ + WHERE int orignumnames; +@@ -1121,25 +1351,31 @@ + + + /* stuff used for 'browse' box */ +-WHERE int anyBrowUp; /* whether *any* browser visible */ ++WHERE int anyBrowUp; /* whether *any* browser visible */ ++WHERE int incrementalSearchTimeout; + + /* stuff used for textview windows */ +-WHERE int anyTextUp; /* are any text windows visible? */ +-WHERE int commentUp; /* comment window up? */ ++WHERE int anyTextUp; /* are any text windows visible? */ ++WHERE int commentUp; /* comment window up? */ + + /* stuff used for xvcut.c */ +-WHERE int forceClipFile; /* don't use property clipboard */ +-WHERE int clearR, clearG, clearB; /* clear color in 24-bit mode */ ++WHERE int forceClipFile; /* don't use property clipboard */ ++WHERE int clearR, clearG, clearB; /* clear color in 24-bit mode */ + + /* stuff used for 'ps' box */ WHERE Window psW; - WHERE int psUp; /* is psW mapped, or what? */ +-WHERE int psUp; /* is psW mapped, or what? */ -WHERE CBUTT encapsCB, pscompCB; +-WHERE char *gsDev, *gsGeomStr; ++WHERE int psUp; /* is psW mapped, or what? */ +WHERE CBUTT encapsCB, pscompCB; - WHERE char *gsDev, *gsGeomStr; ++WHERE const char *gsDev, *gsGeomStr; WHERE int gsRes; -@@ -1210,7 +1246,7 @@ - /*************************** XVMISC.C ***************************/ - void StoreDeleteWindowProp PARM((Window)); --Window CreateWindow PARM((char *, char *, char *, int, int, -+Window CreateWindow PARM((char *, char *, char *, int, int, - u_long, u_long, int)); - void DrawString PARM((Window, int, int, char *)); - void CenterString PARM((Window, int, int, char *)); -@@ -1222,7 +1258,7 @@ - void GenExpose PARM((Window, int, int, u_int, u_int)); - void DimRect PARM((Window, int, int, u_int, u_int, u_long)); ++/* stuff used for 'pcd' box */ ++WHERE Window pcdW; ++WHERE int pcdUp; /* is pcdW mapped, or what? */ ++ ++ + #ifdef HAVE_JPEG + /* stuff used for 'jpeg' box */ + WHERE Window jpegW; +@@ -1147,6 +1383,13 @@ + #endif --void Draw3dRect PARM((Window, int, int, u_int, u_int, int, int, -+void Draw3dRect PARM((Window, int, int, u_int, u_int, int, int, - u_long, u_long, u_long)); - void RemapKeyCheck PARM((KeySym, char *, int *)); -@@ -1237,7 +1273,7 @@ - void SetCursors PARM((int)); - char *BaseName PARM((char *)); ++#ifdef HAVE_JP2K ++/* stuff used for 'jp2k' box */ ++WHERE Window jp2kW; ++WHERE int jp2kUp; /* is jp2kW mapped, or what? */ ++#endif ++ ++ + #ifdef HAVE_TIFF + /* stuff used for 'tiff' box */ + WHERE Window tiffW; +@@ -1154,6 +1397,91 @@ + #endif --void DrawTempGauge PARM((Window, int, int, int, int, double, -+void DrawTempGauge PARM((Window, int, int, int, int, double, - u_long, u_long, u_long, u_long, char *)); - void ProgressMeter PARM((int, int, int, char *)); - void XVDeletedFile PARM((char *)); -@@ -1248,6 +1284,7 @@ - void xv_getwd PARM((char *, size_t)); - char *xv_strstr PARM((char *, char *)); - FILE *xv_fopen PARM((char *, char *)); -+void xv_mktemp PARM((char *, char *)); - void Timer PARM((int)); - - /*************************** XVCOLOR.C ***************************/ -@@ -1282,11 +1319,11 @@ - void DrawEpic PARM((void)); - void KillOldPics PARM((void)); --byte *FSDither PARM((byte *, int, int, int, -+byte *FSDither PARM((byte *, int, int, int, - byte *, byte *, byte *, int, int)); ++#ifdef HAVE_PNG ++/* stuff used for 'png' box */ ++WHERE Window pngW; ++WHERE int pngUp; /* is pngW mapped, or what? */ ++#endif ++ ++ ++#ifdef ENABLE_FIXPIX_SMOOTH ++WHERE int do_fixpix_smooth; /* GRR 19980607: runtime FS dithering */ ++#endif ++ ++#ifdef HAVE_PIC2 ++/* stuff used for 'pic2' box */ ++WHERE Window pic2W; ++WHERE int pic2Up; /* is pic2W mapped, or what? */ ++#endif /* HAVE_PIC2 */ ++ ++#ifdef HAVE_PCD ++/* stuff used for 'pcd' box */ ++WHERE Window pcdW; ++WHERE int pcdUp; /* is pcdW mapped, or what? */ ++#endif /* HAVE_PCD */ ++ ++#ifdef HAVE_MGCSFX ++/* stuff used for 'mgcsfx' box */ ++WHERE Window mgcsfxW; ++WHERE Window mgcsfxNameW; ++WHERE int mgcsfxUp; /* is mgcsfxW mapped, or what? */ ++#endif /* HAVE_MGCSFX */ ++ ++#ifdef TV_L10N ++/* stuff used for TextViewer Japanization */ ++# define LOCALE_USASCII 0 ++# define LOCALE_EUCJ 1 ++# define LOCALE_JIS 2 ++# define LOCALE_MSCODE 3 ++ ++# ifndef LOCALE_DEFAULT ++# define LOCALE_DEFAULT 0 ++# endif /* !LOCALE_DEFAULT */ ++ ++# ifndef MAIN ++ extern char *localeList[]; ++# else ++# ifndef LOCALE_NAME_EUC ++# ifndef X_LOCALE ++# if defined(__FreeBSD__) ++ char *localeList[] = {"", "ja_JP.EUC", "none", "none"}; ++# elif defined(__linux__) ++ char *localeList[] = {"", "ja_JP.eucJP", "none", "ja_JP.SJIS"}; ++# elif defined(__sun) || defined(sun) ++ char *localeList[] = {"", "ja", "none", "none"}; ++# elif defined(__sgi) /* sgi, __sgi, __sgi__ (gcc) */ ++ char *localeList[] = {"", "ja_JP.EUC", "none", "none"}; ++# elif defined(sony_news) ++ char *localeList[] = {"", "ja_JP.EUC", "none", "ja_JP.SJIS"}; ++# elif defined(nec) ++ char *localeList[] = {"", "japan", "none", "none"}; ++# elif defined(__hpux) ++ char *localeList[] = {"", "japanese.euc", "none", "japanese"}; ++# elif defined(__osf__) ++ char *localeList[] = {"", "ja_JP.deckanji", "none", "ja_JP.SJIS"}; ++# elif defined(_AIX) ++ char *localeList[] = {"", "ja_JP", "none", "Ja_JP" }; ++# elif defined(__bsdi) ++ char *localeList[] = {"", "Japanese-EUC", "none", "none" }; ++# else ++ char *localeList[] = {"", "ja_JP.EUC", "ja_JP.JIS", "ja_JP.SJIS"}; ++# endif ++# else ++# if (XlibSpecificationRelease > 5) ++ char *localeList[] = {"", "ja_JP.eucJP", "ja_JP.JIS7", ++ "ja_JP.SJIS"}; ++# else ++ char *localeList[] = {"", "ja_JP.ujis", "ja_JP.jis7", ++ "ja_JP.mscode"}; ++# endif ++# endif /* X_LOCALE */ ++# else ++ char *localeList[] = {"", LOCALE_NAME_EUC, ++ LOCALE_NAME_JIS, LOCALE_NAME_MSCODE}; ++# endif /* LOCALE_NAME_EUC */ ++# endif /* MAIN */ ++#endif /* TV_L10N */ ++ + #undef WHERE + + +@@ -1161,172 +1489,115 @@ + /* function declarations for externally-callable functions */ + + /****************************** XV.C ****************************/ +-int ReadFileType PARM((char *)); +-int ReadPicFile PARM((char *, int, PICINFO *, int)); +-int UncompressFile PARM((char *, char *)); +-void KillPageFiles PARM((char *, int)); +- +-void NewPicGetColors PARM((int, int)); +-void FixAspect PARM((int, int *, int *)); +-void ActivePrevNext PARM((void)); +-int DeleteCmd PARM((void)); +-void StickInCtrlList PARM((int)); +-void AddFNameToCtrlList PARM((char *, char *)); +-void ChangedCtrlList PARM((void)); +-void HandleDispMode PARM((void)); +-char *lower_str PARM((char *)); +-int rd_int PARM((char *)); +-int rd_str PARM((char *)); +-int rd_flag PARM((char *)); +-int rd_str_cl PARM((char *, char *, int)); ++int ReadFileType PARM((char *)); ++int ReadPicFile PARM((char *, int, PICINFO *, int)); ++int UncompressFile PARM((char *, char *, int)); ++void KillPageFiles PARM((char *, int)); ++#ifdef MACBINARY ++int RemoveMacbinary PARM((char *, char *)); ++#endif ++ ++void NewPicGetColors PARM((int, int)); ++void FixAspect PARM((int, int *, int *)); ++void ActivePrevNext PARM((void)); ++int DeleteCmd PARM((void)); ++void StickInCtrlList PARM((int)); ++void AddFNameToCtrlList PARM((const char *, const char *)); ++void ChangedCtrlList PARM((void)); ++void HandleDispMode PARM((void)); ++char *lower_str PARM((char *)); ++int rd_int PARM((const char *)); ++int rd_str PARM((const char *)); ++int rd_flag PARM((const char *)); + +-/****************************** XVEVENT.C ****************************/ +-int EventLoop PARM((void)); +-int HandleEvent PARM((XEvent *, int *)); + +-void SelectDispMB PARM((int)); +-void Select24to8MB PARM((int)); +-void SelectRootMB PARM((int)); +-void SelectWindowMB PARM((int)); +-void SelectSizeMB PARM((int)); +- +-void DoPrint PARM((void)); +-void NewCutBuffer PARM((char *)); +-void DrawWindow PARM((int,int,int,int)); +-void WResize PARM((int, int)); +-void WRotate PARM((void)); +-void WCrop PARM((int, int, int, int)); +-void WUnCrop PARM((void)); +-void GetWindowPos PARM((XWindowAttributes *)); +-void SetWindowPos PARM((XWindowAttributes *)); +-void SetEpicMode PARM((void)); +-int xvErrorHandler PARM((Display *, XErrorEvent *)); +- +-/****************************** XVROOT.C ****************************/ +-void MakeRootPic PARM((void)); +-void ClearRoot PARM((void)); +-void SaveRootInfo PARM((void)); +-void KillOldRootInfo PARM((void)); ++/*************************** XV24TO8.C **************************/ ++void Init24to8 PARM((void)); ++byte *Conv24to8 PARM((byte *, int, int, int, ++ byte *, byte *, byte *)); - void CreateXImage PARM((void)); +-/*************************** XVMISC.C ***************************/ +-void StoreDeleteWindowProp PARM((Window)); +-Window CreateWindow PARM((char *, char *, char *, int, int, +- u_long, u_long, int)); +-void DrawString PARM((Window, int, int, char *)); +-void CenterString PARM((Window, int, int, char *)); +-void ULineString PARM((Window, int, int, char *)); +-int StringWidth PARM((char *)); +-int CursorKey PARM((KeySym, int, int)); +-void FakeButtonPress PARM((BUTT *)); +-void FakeKeyPress PARM((Window, KeySym)); +-void GenExpose PARM((Window, int, int, u_int, u_int)); +-void DimRect PARM((Window, int, int, u_int, u_int, u_long)); +- +-void Draw3dRect PARM((Window, int, int, u_int, u_int, int, int, +- u_long, u_long, u_long)); +- +-void RemapKeyCheck PARM((KeySym, char *, int *)); +-void xvDestroyImage PARM((XImage *)); +-void SetCropString PARM((void)); +-void SetSelectionString PARM((void)); +-void Warning PARM((void)); +-void FatalError PARM((char *)); +-void Quit PARM((int)); +-void LoadFishCursors PARM((void)); +-void WaitCursor PARM((void)); +-void SetCursors PARM((int)); +-char *BaseName PARM((char *)); +- +-void DrawTempGauge PARM((Window, int, int, int, int, double, +- u_long, u_long, u_long, u_long, char *)); +-void ProgressMeter PARM((int, int, int, char *)); +-void XVDeletedFile PARM((char *)); +-void XVCreatedFile PARM((char *)); +-void xvbcopy PARM((char *, char *, size_t)); +-int xvbcmp PARM((char *, char *, size_t)); +-void xvbzero PARM((char *, size_t)); +-void xv_getwd PARM((char *, size_t)); +-char *xv_strstr PARM((char *, char *)); +-FILE *xv_fopen PARM((char *, char *)); +-void Timer PARM((int)); ++byte *Conv8to24 PARM((byte *, int, int, byte *, byte *, byte *)); + +-/*************************** XVCOLOR.C ***************************/ +-void SortColormap PARM((byte *, int, int, int *, byte*,byte*,byte*, +- byte *, byte *)); +-void ColorCompress8 PARM((byte *)); +-void AllocColors PARM((void)); +-Status xvAllocColor PARM((Display *, Colormap, XColor *)); +-void xvFreeColors PARM((Display *, Colormap, u_long *, int, u_long)); +-void FreeColors PARM((void)); +-void ApplyEditColor PARM((int)); +-int MakeStdCmaps PARM((void)); +-void MakeBrowCmap PARM((void)); +-void ChangeCmapMode PARM((int, int, int)); + +-/*************************** XVIMAGE.C ***************************/ +-void Resize PARM((int, int)); +-void GenerateCpic PARM((void)); +-void GenerateEpic PARM((int, int)); +-void DoZoom PARM((int, int, u_int)); +-void Crop PARM((void)); +-void UnCrop PARM((void)); +-void AutoCrop PARM((void)); +-int DoAutoCrop PARM((void)); +-void DoCrop PARM((int, int, int, int)); +-void Rotate PARM((int)); +-void DoRotate PARM((int)); +-void RotatePic PARM((byte *, int, int *, int *, int)); +-void Flip PARM((int)); +-void FlipPic PARM((byte *, int, int, int)); +-void InstallNewPic PARM((void)); +-void DrawEpic PARM((void)); +-void KillOldPics PARM((void)); +- +-byte *FSDither PARM((byte *, int, int, int, +- byte *, byte *, byte *, int, int)); +- +-void CreateXImage PARM((void)); -XImage *Pic8ToXImage PARM((byte *, u_int, u_int, u_long *, -+XImage *Pic8ToXImage PARM((byte *, u_int, u_int, u_long *, - byte *, byte *, byte *)); - - XImage *Pic24ToXImage PARM((byte *, u_int, u_int)); -@@ -1306,21 +1343,21 @@ - void DoAlg PARM((int)); - - /*************************** XVSMOOTH.C ***************************/ +- byte *, byte *, byte *)); +- +-XImage *Pic24ToXImage PARM((byte *, u_int, u_int)); +- +-void Set824Menus PARM((int)); +-void Change824Mode PARM((int)); +-void FreeEpic PARM((void)); +-void InvertPic24 PARM((byte *, int, int)); ++/*************************** XVALG.C ***************************/ ++void AlgInit PARM((void)); ++void DoAlg PARM((int)); + +-byte *XVGetSubImage PARM((byte *, int, int,int, int,int,int,int)); + +-int DoPad PARM((int, char *, int, int, int, int)); +-int LoadPad PARM((PICINFO *, char *)); ++/*************************** XVBROWSE.C ************************/ ++void CreateBrowse PARM((const char *, const char *, const char *, ++ const char *, const char *)); ++void OpenBrowse PARM((void)); ++void HideBrowseWindows PARM((void)); ++void UnHideBrowseWindows PARM((void)); ++void SetBrowseCursor PARM((Cursor)); ++void KillBrowseWindows PARM((void)); ++int BrowseCheckEvent PARM((XEvent *, int *, int *)); ++int BrowseDelWin PARM((Window)); ++void SetBrowStr PARM((const char *)); ++void RegenBrowseIcons PARM((void)); ++void BRDeletedFile PARM((char *)); ++void BRCreatedFile PARM((char *)); + +-/*************************** XVALG.C ***************************/ +-void AlgInit PARM((void)); +-void DoAlg PARM((int)); + +-/*************************** XVSMOOTH.C ***************************/ -byte *SmoothResize PARM((byte *, int, int, int, int, byte *, byte *, -+byte *SmoothResize PARM((byte *, int, int, int, int, byte *, byte *, - byte *, byte *, byte *, byte *, int)); +- byte *, byte *, byte *, byte *, int)); ++/**************************** XVBUTT.C ***************************/ ++void BTCreate PARM((BUTT *, Window, int, int, u_int, u_int, ++ const char *, u_long, u_long, u_long, u_long)); -byte *Smooth24 PARM((byte *, int, int, int, int, int, -+byte *Smooth24 PARM((byte *, int, int, int, int, int, - byte *, byte *, byte *)); +- byte *, byte *, byte *)); ++void BTSetActive PARM((BUTT *, int)); ++void BTRedraw PARM((BUTT *)); ++int BTTrack PARM((BUTT *)); -byte *DoColorDither PARM((byte *, byte *, int, int, byte *, byte *, -+byte *DoColorDither PARM((byte *, byte *, int, int, byte *, byte *, - byte *, byte *, byte *, byte *, int)); +- byte *, byte *, byte *, byte *, int)); -byte *Do332ColorDither PARM((byte *, byte *, int, int, byte *, byte *, -+byte *Do332ColorDither PARM((byte *, byte *, int, int, byte *, byte *, - byte *, byte *, byte *, byte *, int)); +- byte *, byte *, byte *, byte *, int)); ++RBUTT *RBCreate PARM((RBUTT *, Window, int, int, const char *, ++ u_long, u_long, u_long, u_long)); - /*************************** XV24TO8.C **************************/ - void Init24to8 PARM((void)); +-/*************************** XV24TO8.C **************************/ +-void Init24to8 PARM((void)); -byte *Conv24to8 PARM((byte *, int, int, int, -+byte *Conv24to8 PARM((byte *, int, int, int, - byte *, byte *, byte *)); - - byte *Conv8to24 PARM((byte *, int, int, byte *, byte *, byte *)); -@@ -1337,7 +1374,7 @@ +- byte *, byte *, byte *)); ++void RBRedraw PARM((RBUTT *, int)); ++void RBSelect PARM((RBUTT *, int)); ++int RBWhich PARM((RBUTT *)); ++int RBCount PARM((RBUTT *)); ++void RBSetActive PARM((RBUTT *, int, int)); ++int RBClick PARM((RBUTT *, int, int)); ++int RBTrack PARM((RBUTT *, int)); ++ ++ ++void CBCreate PARM((CBUTT *, Window, int, int, const char *, ++ u_long, u_long, u_long, u_long)); ++ ++void CBRedraw PARM((CBUTT *)); ++void CBSetActive PARM((CBUTT *, int)); ++int CBClick PARM((CBUTT *,int,int)); ++int CBTrack PARM((CBUTT *)); ++ ++ ++void MBCreate PARM((MBUTT *, Window, int, int, u_int, u_int, ++ const char *, const char * const *, int, ++ u_long, u_long, u_long, u_long)); ++ ++void MBRedraw PARM((MBUTT *)); ++void MBSetActive PARM((MBUTT *, int)); ++int MBWhich PARM((MBUTT *)); ++void MBSelect PARM((MBUTT *, int)); ++int MBClick PARM((MBUTT *, int, int)); ++int MBTrack PARM((MBUTT *)); ++ ++ ++/*************************** XVCOLOR.C ***************************/ ++void SortColormap PARM((byte *, int, int, int *, byte*,byte*,byte*, ++ byte *, byte *)); ++void ColorCompress8 PARM((byte *)); ++void AllocColors PARM((void)); ++Status xvAllocColor PARM((Display *, Colormap, XColor *)); ++void xvFreeColors PARM((Display *, Colormap, u_long *, int, u_long)); ++void FreeColors PARM((void)); ++void ApplyEditColor PARM((int)); ++int MakeStdCmaps PARM((void)); ++void MakeBrowCmap PARM((void)); ++void ChangeCmapMode PARM((int, int, int)); + +-byte *Conv8to24 PARM((byte *, int, int, byte *, byte *, byte *)); + + /**************************** XVCTRL.C **************************/ +-void CreateCtrl PARM((char *)); ++void CreateCtrl PARM((const char *)); + void SetButtPix PARM((BUTT *, Pixmap, int, int)); + Pixmap MakePix1 PARM((Window, byte *, int, int)); + +@@ -1337,7 +1608,7 @@ void DrawCtrlStr PARM((void)); void ScrollToCurrent PARM((LIST *)); @@ -4993,172 +8404,716 @@ diff -ruN xv-3.10a/xv.h xv-3.10a-bugfixes/xv.h char **, int, u_long, u_long, u_long, u_long, void (*)(int, SCRL *), int, int)); -@@ -1384,7 +1421,7 @@ - FILE *OpenOutFile PARM((char *)); - int CloseOutFile PARM((FILE *, char *, int)); +@@ -1346,20 +1617,56 @@ + void LSChangeData PARM((LIST *, char **, int)); + void LSNewData PARM((LIST *, char **, int)); + void LSKey PARM((LIST *, int)); ++int rd_str_cl PARM((const char *, const char *, int)); + + +-/*************************** XVINFO.C ***************************/ +-void CreateInfo PARM((char *)); +-void InfoBox PARM((int)); +-void RedrawInfo PARM((int, int, int, int)); +-void SetInfoMode PARM((int)); +-char *GetISTR PARM((int)); ++/**************************** XVCUT.C ***************************/ ++int CutAllowed PARM((void)); ++int PasteAllowed PARM((void)); ++void DoImgCopy PARM((void)); ++void DoImgCut PARM((void)); ++void DoImgClear PARM((void)); ++void DoImgPaste PARM((void)); + +-#if defined(__STDC__) && !defined(NOSTDHDRS) +-void SetISTR(int, ...); +-#else +-void SetISTR(); +-#endif ++void SaveToClip PARM((byte *)); ++void InitSelection PARM((void)); ++int HaveSelection PARM((void)); ++int GetSelType PARM((void)); ++void GetSelRCoords PARM((int *, int *, int *, int *)); ++void EnableSelection PARM((int)); ++void DrawSelection PARM((int)); ++int DoSelection PARM((XButtonEvent *)); ++void MoveGrowSelection PARM((int, int, int, int)); ++void BlinkSelection PARM((int)); ++void FlashSelection PARM((int)); ++ ++void CropRect2Rect PARM((int*,int*,int*,int*, int,int,int,int)); ++void CoordE2C PARM((int, int, int *, int *)); ++void CoordC2E PARM((int, int, int *, int *)); ++void CoordP2C PARM((int, int, int *, int *)); ++void CoordC2P PARM((int, int, int *, int *)); ++void CoordP2E PARM((int, int, int *, int *)); ++void CoordE2P PARM((int, int, int *, int *)); ++ ++ ++/*************************** XVDFLT.C ***************************/ ++void LoadDfltPic PARM((PICINFO *)); ++void xbm2pic PARM((byte *, int, int, byte *, int, int, int, int, ++ int)); ++void DrawStr2Pic PARM((char *, int, int, byte *, int, int, int)); ++ ++ ++/*************************** XVDIAL.C ***************************/ ++void DCreate PARM((DIAL *, Window, int, int, int, int, ++ double, double, double, double, double, ++ u_long, u_long, u_long, u_long, ++ const char *, const char *)); ++ ++void DSetRange PARM((DIAL *, double,double,double,double,double)); ++void DSetVal PARM((DIAL *, double)); ++void DSetActive PARM((DIAL *, int)); ++void DRedraw PARM((DIAL *)); ++int DTrack PARM((DIAL *, int, int)); + + + /**************************** XVDIR.C ***************************/ +@@ -1376,15 +1683,15 @@ + void TrackDDirW PARM((int,int)); + int DirKey PARM((int)); + int DoSave PARM((void)); +-void SetDirFName PARM((char *)); ++void SetDirFName PARM((const char *)); + char *GetDirFName PARM((void)); + char *GetDirFullName PARM((void)); + void SetDirSaveMode PARM((int, int)); + int Globify PARM((char *)); +-FILE *OpenOutFile PARM((char *)); +-int CloseOutFile PARM((FILE *, char *, int)); ++FILE *OpenOutFile PARM((const char *)); ++int CloseOutFile PARM((FILE *, const char *, int)); -byte *GenSavePic PARM((int*, int*,int*, int*, int*, +byte *GenSavePic PARM((int*, int*,int*, int*, int*, byte**, byte**, byte**)); void GetSaveSize PARM((int *, int *)); -@@ -1451,11 +1488,11 @@ +@@ -1392,47 +1699,30 @@ + int CheckPoll PARM((int)); + void DIRDeletedFile PARM((char *)); + void DIRCreatedFile PARM((char *)); ++FILE *pic2_OpenOutFile PARM((char *, int *)); ++void pic2_KillNullFile PARM((FILE *)); ++int OpenOutFileDesc PARM((char *)); + + +-/*************************** XVBROWSE.C ************************/ +-void CreateBrowse PARM((char *, char *, char *, char *, char *)); +-void OpenBrowse PARM((void)); +-void HideBrowseWindows PARM((void)); +-void UnHideBrowseWindows PARM((void)); +-void SetBrowseCursor PARM((Cursor)); +-void KillBrowseWindows PARM((void)); +-int BrowseCheckEvent PARM((XEvent *, int *, int *)); +-int BrowseDelWin PARM((Window)); +-void SetBrowStr PARM((char *)); +-void RegenBrowseIcons PARM((void)); +-void BRDeletedFile PARM((char *)); +-void BRCreatedFile PARM((char *)); +- +- +-/*************************** XVTEXT.C ************************/ +-void CreateTextWins PARM((char *, char *)); +-void TextView PARM((char *)); +-void OpenTextView PARM((char *, int, char *, int)); +- +-void OpenCommentText PARM((void)); +-void CloseCommentText PARM((void)); +-void ChangeCommentText PARM((void)); +- +-void ShowLicense PARM((void)); +-void ShowKeyHelp PARM((void)); +- +-void HideTextWindows PARM((void)); +-void UnHideTextWindows PARM((void)); +-void RaiseTextWindows PARM((void)); +-void SetTextCursor PARM((Cursor)); +-void KillTextWindows PARM((void)); +-int TextCheckEvent PARM((XEvent *, int *, int *)); +-int TextDelWin PARM((Window)); ++/****************************** XVEVENT.C ****************************/ ++int EventLoop PARM((void)); ++int HandleEvent PARM((XEvent *, int *)); + ++void NewCutBuffer PARM((char *)); ++void DrawWindow PARM((int,int,int,int)); ++void WResize PARM((int, int)); ++void WRotate PARM((void)); ++void WCrop PARM((int, int, int, int)); ++void WUnCrop PARM((void)); ++void GetWindowPos PARM((XWindowAttributes *)); ++void SetWindowPos PARM((XWindowAttributes *)); ++void SetEpicMode PARM((void)); ++int xvErrorHandler PARM((Display *, XErrorEvent *)); + + + /**************************** XVGAM.C **************************/ +-void CreateGam PARM((char *, double, double, double, double, int)); ++void CreateGam PARM((const char *, double, double, double, double, ++ int)); + int GamCheckEvent PARM((XEvent *)); + void GamBox PARM((int)); + void NewCMap PARM((void)); +@@ -1450,173 +1740,344 @@ + byte *GammifyPic24 PARM((byte *, int, int)); void GamSetAutoApply PARM((int)); - /*************************** XVSCRL.C ***************************/ +-/*************************** XVSCRL.C ***************************/ -void SCCreate PARM((SCRL *, Window, int, int, int, int, - int, int, int, int, u_long, u_long, -+void SCCreate PARM((SCRL *, Window, int, int, int, int, -+ int, int, int, int, u_long, u_long, - u_long, u_long, void (*)(int, SCRL *))); +- u_long, u_long, void (*)(int, SCRL *))); -void SCChange PARM((SCRL *, int, int, int, int, int, -+void SCChange PARM((SCRL *, int, int, int, int, int, - int, int, int)); +- int, int, int)); ++/**************************** XVGRAB.C ***************************/ ++int Grab PARM((void)); ++int LoadGrab PARM((PICINFO *)); - void SCSetRange PARM((SCRL *, int, int, int, int)); -@@ -1465,8 +1502,8 @@ +-void SCSetRange PARM((SCRL *, int, int, int, int)); +-int SCSetVal PARM((SCRL *, int)); +-void SCRedraw PARM((SCRL *)); +-void SCTrack PARM((SCRL *, int, int)); ++/**************************** XVGRAF.C ***************************/ ++void CreateGraf PARM((GRAF *, Window, int, int, ++ u_long, u_long, const char *)); - /*************************** XVDIAL.C ***************************/ +-/*************************** XVDIAL.C ***************************/ -void DCreate PARM((DIAL *, Window, int, int, int, int, int, - int, int, int, u_long, u_long, u_long, -+void DCreate PARM((DIAL *, Window, int, int, int, int, int, -+ int, int, int, u_long, u_long, u_long, - u_long, char *, char *)); - - void DSetRange PARM((DIAL *, int, int, int, int)); -@@ -1477,7 +1514,7 @@ - - - /**************************** XVBUTT.C ***************************/ +- u_long, char *, char *)); ++void InitGraf PARM((GRAF *)); ++void RedrawGraf PARM((GRAF *, int)); ++int ClickGraf PARM((GRAF *, Window, int, int)); ++int GrafKey PARM((GRAF *, char *)); ++void GenerateGrafFunc PARM((GRAF *, int)); ++void Graf2Str PARM((GRAF_STATE *, char *)); ++int Str2Graf PARM((GRAF_STATE *, const char *)); ++void GetGrafState PARM((GRAF *, GRAF_STATE *)); ++int SetGrafState PARM((GRAF *, GRAF_STATE *)); ++void InitSpline PARM((int *, int *, int, double *)); ++double EvalSpline PARM((int *, int *, double *, int, double)); + +-void DSetRange PARM((DIAL *, int, int, int, int)); +-void DSetVal PARM((DIAL *, int)); +-void DSetActive PARM((DIAL *, int)); +-void DRedraw PARM((DIAL *)); +-int DTrack PARM((DIAL *, int, int)); + ++/*************************** XVIMAGE.C ***************************/ ++void Resize PARM((int, int)); ++void GenerateCpic PARM((void)); ++void GenerateEpic PARM((int, int)); ++void DoZoom PARM((int, int, u_int)); ++void Crop PARM((void)); ++void UnCrop PARM((void)); ++void AutoCrop PARM((void)); ++int DoAutoCrop PARM((void)); ++void DoCrop PARM((int, int, int, int)); ++void Rotate PARM((int)); ++void DoRotate PARM((int)); ++void RotatePic PARM((byte *, int, int *, int *, int)); ++void Flip PARM((int)); ++void FlipPic PARM((byte *, int, int, int)); ++void InstallNewPic PARM((void)); ++void DrawEpic PARM((void)); ++void KillOldPics PARM((void)); + +-/**************************** XVBUTT.C ***************************/ -void BTCreate PARM((BUTT *, Window, int, int, u_int, u_int, -+void BTCreate PARM((BUTT *, Window, int, int, u_int, u_int, - char *, u_long, u_long, u_long, u_long)); +- char *, u_long, u_long, u_long, u_long)); ++byte *FSDither PARM((byte *, int, int, int, ++ byte *, byte *, byte *, int, int)); - void BTSetActive PARM((BUTT *, int)); -@@ -1485,7 +1522,7 @@ - int BTTrack PARM((BUTT *)); +-void BTSetActive PARM((BUTT *, int)); +-void BTRedraw PARM((BUTT *)); +-int BTTrack PARM((BUTT *)); ++void CreateXImage PARM((void)); ++XImage *Pic8ToXImage PARM((byte *, u_int, u_int, u_long *, ++ byte *, byte *, byte *)); ++XImage *Pic24ToXImage PARM((byte *, u_int, u_int)); -RBUTT *RBCreate PARM((RBUTT *, Window, int, int, char *, -+RBUTT *RBCreate PARM((RBUTT *, Window, int, int, char *, - u_long, u_long, u_long, u_long)); - - void RBRedraw PARM((RBUTT *, int)); -@@ -1497,7 +1534,7 @@ - int RBTrack PARM((RBUTT *, int)); - +- u_long, u_long, u_long, u_long)); ++void Set824Menus PARM((int)); ++void Change824Mode PARM((int)); ++void FreeEpic PARM((void)); ++void InvertPic24 PARM((byte *, int, int)); + +-void RBRedraw PARM((RBUTT *, int)); +-void RBSelect PARM((RBUTT *, int)); +-int RBWhich PARM((RBUTT *)); +-int RBCount PARM((RBUTT *)); +-void RBSetActive PARM((RBUTT *, int, int)); +-int RBClick PARM((RBUTT *, int, int)); +-int RBTrack PARM((RBUTT *, int)); ++byte *XVGetSubImage PARM((byte *, int, int,int, int,int,int,int)); + ++int DoPad PARM((int, char *, int, int, int, int)); ++int LoadPad PARM((PICINFO *, char *)); -void CBCreate PARM((CBUTT *, Window, int, int, char *, -+void CBCreate PARM((CBUTT *, Window, int, int, char *, - u_long, u_long, u_long, u_long)); - - void CBRedraw PARM((CBUTT *)); -@@ -1506,8 +1543,8 @@ - int CBTrack PARM((CBUTT *)); - +- u_long, u_long, u_long, u_long)); + +-void CBRedraw PARM((CBUTT *)); +-void CBSetActive PARM((CBUTT *, int)); +-int CBClick PARM((CBUTT *,int,int)); +-int CBTrack PARM((CBUTT *)); ++/*************************** XVINFO.C ***************************/ ++void CreateInfo PARM((const char *)); ++void InfoBox PARM((int)); ++void RedrawInfo PARM((int, int, int, int)); ++void SetInfoMode PARM((int)); ++char *GetISTR PARM((int)); + ++#if defined(__STDC__) && !defined(NOSTDHDRS) ++void SetISTR(int, ...); ++#else ++void SetISTR(); ++#endif -void MBCreate PARM((MBUTT *, Window, int, int, u_int, u_int, - char *, -+void MBCreate PARM((MBUTT *, Window, int, int, u_int, u_int, -+ char *, - char **, int,u_long,u_long, u_long, u_long)); - - void MBRedraw PARM((MBUTT *)); -@@ -1519,7 +1556,7 @@ - - - /**************************** XVGRAF.C ***************************/ +- char **, int,u_long,u_long, u_long, u_long)); + +-void MBRedraw PARM((MBUTT *)); +-void MBSetActive PARM((MBUTT *, int)); +-int MBWhich PARM((MBUTT *)); +-void MBSelect PARM((MBUTT *, int)); +-int MBClick PARM((MBUTT *, int, int)); +-int MBTrack PARM((MBUTT *)); ++/*************************** XVMISC.C ***************************/ ++void StoreDeleteWindowProp PARM((Window)); ++Window CreateWindow PARM((const char *, const char *, const char *, ++ int, int, u_long, u_long, int)); ++void DrawString PARM((Window, int, int, const char *)); ++void CenterString PARM((Window, int, int, const char *)); ++void ULineString PARM((Window, int, int, const char *)); ++int StringWidth PARM((const char *)); ++int CursorKey PARM((KeySym, int, int)); ++void FakeButtonPress PARM((BUTT *)); ++void FakeKeyPress PARM((Window, KeySym)); ++void GenExpose PARM((Window, int, int, u_int, u_int)); ++void DimRect PARM((Window, int, int, u_int, u_int, u_long)); ++ ++void Draw3dRect PARM((Window, int, int, u_int, u_int, int, int, ++ u_long, u_long, u_long)); ++ ++void RemapKeyCheck PARM((KeySym, char *, int *)); ++void xvDestroyImage PARM((XImage *)); ++void SetCropString PARM((void)); ++void SetSelectionString PARM((void)); ++void Warning PARM((void)); ++void FatalError PARM((const char *)); ++void Quit PARM((int)); ++void LoadFishCursors PARM((void)); ++void WaitCursor PARM((void)); ++void SetCursors PARM((int)); ++const char *BaseName PARM((const char *)); ++ ++void DrawTempGauge PARM((Window, int, int, int, int, double, u_long, ++ u_long, u_long, u_long, const char *)); ++void ProgressMeter PARM((int, int, int, const char *)); ++void XVDeletedFile PARM((char *)); ++void XVCreatedFile PARM((char *)); ++void xvbcopy PARM((const char *, char *, size_t)); ++int xvbcmp PARM((const char *, const char *, size_t)); ++void xvbzero PARM((char *, size_t)); ++void xv_getwd PARM((char *, size_t)); ++char *xv_strstr PARM((const char *, const char *)); ++FILE *xv_fopen PARM((const char *, const char *)); ++void xv_mktemp PARM((char *, const char *)); ++void Timer PARM((int)); + + +-/**************************** XVGRAF.C ***************************/ -void CreateGraf PARM((GRAF *, Window, int, int, -+void CreateGraf PARM((GRAF *, Window, int, int, - u_long, u_long, char *)); - - void InitGraf PARM((GRAF *)); -@@ -1539,32 +1576,32 @@ - int LoadGIF PARM((char *, PICINFO *)); - - /*************************** XVGIFWR.C **************************/ +- u_long, u_long, char *)); ++/*************************** XVPOPUP.C ***************************/ ++void CenterMapWindow PARM((Window, int, int, int, int)); ++int PopUp PARM((const char *, const char **, int)); ++void ErrPopUp PARM((const char *, const char *)); ++int GetStrPopUp PARM((const char *, const char **, int, char *, int, ++ const char *, int)); ++int GrabPopUp PARM((int *, int *)); ++int PadPopUp PARM((int *, char **, int *, int *, int *, int *)); ++void ClosePopUp PARM((void)); ++void OpenAlert PARM((const char *)); ++void CloseAlert PARM((void)); ++int PUCheckEvent PARM((XEvent *)); + +-void InitGraf PARM((GRAF *)); +-void RedrawGraf PARM((GRAF *, int)); +-int ClickGraf PARM((GRAF *, Window, int, int)); +-int GrafKey PARM((GRAF *, char *)); +-void GenerateGrafFunc PARM((GRAF *, int)); +-void Graf2Str PARM((GRAF_STATE *, char *)); +-int Str2Graf PARM((GRAF_STATE *, char *)); +-void GetGrafState PARM((GRAF *, GRAF_STATE *)); +-int SetGrafState PARM((GRAF *, GRAF_STATE *)); +-void InitSpline PARM((int *, int *, int, double *)); +-double EvalSpline PARM((int *, int *, double *, int, double)); + ++/**************************** XVROOT.C ****************************/ ++void MakeRootPic PARM((void)); ++void ClearRoot PARM((void)); ++void SaveRootInfo PARM((void)); ++void KillOldRootInfo PARM((void)); + +-/**************************** XVGIF.C ***************************/ +-int LoadGIF PARM((char *, PICINFO *)); + +-/*************************** XVGIFWR.C **************************/ -int WriteGIF PARM((FILE *, byte *, int, int, int, -+int WriteGIF PARM((FILE *, byte *, int, int, int, - byte *, byte *, byte *, int, int, char *)); +- byte *, byte *, byte *, int, int, char *)); ++/*************************** XVSCRL.C ***************************/ ++void SCCreate PARM((SCRL *, Window, int, int, int, int, ++ int, int, int, int, u_long, u_long, ++ u_long, u_long, void (*)(int, SCRL *))); - /**************************** XVPM.C ****************************/ - int LoadPM PARM((char *, PICINFO *)); +-/**************************** XVPM.C ****************************/ +-int LoadPM PARM((char *, PICINFO *)); -int WritePM PARM((FILE *, byte *, int, int, int, byte *, -+int WritePM PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte *, int, int, char *)); +- byte *, byte *, int, int, char *)); ++void SCChange PARM((SCRL *, int, int, int, int, int, ++ int, int, int)); - /**************************** XVPBM.C ***************************/ - int LoadPBM PARM((char *, PICINFO *)); +-/**************************** XVPBM.C ***************************/ +-int LoadPBM PARM((char *, PICINFO *)); -int WritePBM PARM((FILE *, byte *, int, int, int, byte *, -+int WritePBM PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte *, int, int, int, char *)); - - /**************************** XVXBM.C ***************************/ - int LoadXBM PARM((char *, PICINFO *)); +- byte *, byte *, int, int, int, char *)); ++void SCSetRange PARM((SCRL *, int, int, int, int)); ++int SCSetVal PARM((SCRL *, int)); ++void SCRedraw PARM((SCRL *)); ++void SCTrack PARM((SCRL *, int, int)); + +-/**************************** XVXBM.C ***************************/ +-int LoadXBM PARM((char *, PICINFO *)); -int WriteXBM PARM((FILE *, byte *, int, int, byte *, byte *, -+int WriteXBM PARM((FILE *, byte *, int, int, byte *, byte *, - byte *, char *)); +- byte *, char *)); - /**************************** XVSUNRAS.C ***************************/ - int LoadSunRas PARM((char *, PICINFO *)); +-/**************************** XVSUNRAS.C ***************************/ +-int LoadSunRas PARM((char *, PICINFO *)); -int WriteSunRas PARM((FILE *, byte *, int, int, int, byte *, -+int WriteSunRas PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte*, int, int, int)); +- byte *, byte*, int, int, int)); ++/*************************** XVSMOOTH.C ***************************/ ++byte *SmoothResize PARM((byte *, int, int, int, int, byte *, byte *, ++ byte *, byte *, byte *, byte *, int)); - /**************************** XVBMP.C ***************************/ - int LoadBMP PARM((char *, PICINFO *)); +-/**************************** XVBMP.C ***************************/ +-int LoadBMP PARM((char *, PICINFO *)); -int WriteBMP PARM((FILE *, byte *, int, int, int, byte *, -+int WriteBMP PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte *, int, int)); +- byte *, byte *, int, int)); ++byte *Smooth24 PARM((byte *, int, int, int, int, int, ++ byte *, byte *, byte *)); - /**************************** XVRLE.C ***************************/ -@@ -1572,7 +1609,7 @@ +-/**************************** XVRLE.C ***************************/ +-int LoadRLE PARM((char *, PICINFO *)); ++byte *DoColorDither PARM((byte *, byte *, int, int, byte *, byte *, ++ byte *, byte *, byte *, byte *, int)); - /**************************** XVIRIS.C ***************************/ - int LoadIRIS PARM((char *, PICINFO *)); +-/**************************** XVIRIS.C ***************************/ +-int LoadIRIS PARM((char *, PICINFO *)); -int WriteIRIS PARM((FILE *, byte *, int, int, int, byte *, -+int WriteIRIS PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte *, int, int)); - - /**************************** XVPCX.C ***************************/ -@@ -1583,12 +1620,12 @@ - - /**************************** XVTARGA.C ***************************/ - int LoadTarga PARM((char *, PICINFO *)); +- byte *, byte *, int, int)); ++byte *Do332ColorDither PARM((byte *, byte *, int, int, byte *, byte *, ++ byte *, byte *, byte *, byte *, int)); + +-/**************************** XVPCX.C ***************************/ +-int LoadPCX PARM((char *, PICINFO *)); + +-/**************************** XVIFF.C ***************************/ +-int LoadIFF PARM((char *, PICINFO *)); ++/*************************** XVTEXT.C ************************/ ++void CreateTextWins PARM((const char *, const char *)); ++int TextView PARM((const char *)); ++void OpenTextView PARM((const char *, int, const char *, int)); + +-/**************************** XVTARGA.C ***************************/ +-int LoadTarga PARM((char *, PICINFO *)); -int WriteTarga PARM((FILE *, byte *, int, int, int, byte *, -+int WriteTarga PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte *, int, int)); +- byte *, byte *, int, int)); ++void OpenCommentText PARM((void)); ++void CloseCommentText PARM((void)); ++void ChangeCommentText PARM((void)); - /**************************** XVXPM.C ***************************/ - int LoadXPM PARM((char *, PICINFO *)); +-/**************************** XVXPM.C ***************************/ +-int LoadXPM PARM((char *, PICINFO *)); -int WriteXPM PARM((FILE *, byte *, int, int, int, byte *, -+int WriteXPM PARM((FILE *, byte *, int, int, int, byte *, - byte *, byte *, int, int, char *, char *)); +- byte *, byte *, int, int, char *, char *)); ++void ShowLicense PARM((void)); ++void ShowKeyHelp PARM((void)); + +-/**************************** XVXWD.C ***************************/ +-int LoadXWD PARM((char *, PICINFO *)); ++void HideTextWindows PARM((void)); ++void UnHideTextWindows PARM((void)); ++void RaiseTextWindows PARM((void)); ++void SetTextCursor PARM((Cursor)); ++void KillTextWindows PARM((void)); ++int TextCheckEvent PARM((XEvent *, int *, int *)); ++int TextDelWin PARM((Window)); ++ ++int CharsetCheckEvent PARM((XEvent *)); ++int CharsetDelWin PARM((Window)); ++ ++ ++/**************************** XVVD.C ****************************/ ++void Vdinit PARM((void)); ++void Vdsettle PARM((void)); ++int Chvdir PARM((char *)); ++void Dirtovd PARM((char *)); ++void Vdtodir PARM((char *)); ++void Dirtosubst PARM((char *)); ++int Mkvdir PARM((char *)); ++void Mkvdir_force PARM((char *)); ++int Rmvdir PARM((char *)); ++int Movevdir PARM((char *, char *)); ++int Isarchive PARM((char *)); ++int Isvdir PARM((char *)); ++void vd_HUPhandler PARM((void)); ++void vd_handler PARM((int)); ++int vd_Xhandler PARM((Display *, XErrorEvent *)); ++int vd_XIOhandler PARM((Display *)); ++void vd_handler_setup PARM((void)); ++ ++ ++ ++/*=======================================================================*/ ++/* IMAGE FORMATS */ ++/*=======================================================================*/ ++ ++/**************************** XVBMP.C ***************************/ ++int LoadBMP PARM((char *, PICINFO *)); ++int WriteBMP PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte *, int, int)); - /**************************** XVXWD.C ***************************/ -@@ -1607,7 +1644,7 @@ + /**************************** XVFITS.C ***************************/ + int LoadFITS PARM((char *, PICINFO *, int)); + int WriteFITS PARM((FILE *, byte *, int, int, int, byte *, + byte *, byte *, int, int, char *)); + ++/**************************** XVGIF.C ***************************/ ++int LoadGIF PARM((char *, PICINFO *)); ++ ++/**************************** XVGIFWR.C **************************/ ++int WriteGIF PARM((FILE *, byte *, int, int, int, ++ byte *, byte *, byte *, int, int, char *)); ++ ++/**************************** XVHIPS.C ***************************/ ++int LoadHIPS PARM((char *, PICINFO *)); ++ ++/**************************** XVIFF.C ***************************/ ++int LoadIFF PARM((char *, PICINFO *)); ++ ++/**************************** XVIRIS.C ***************************/ ++int LoadIRIS PARM((char *, PICINFO *)); ++int WriteIRIS PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte *, int, int)); ++ ++/**************************** XVJP2K.C ***************************/ ++int LoadJPC PARM((char *, register PICINFO *, int)); ++int LoadJP2 PARM((char *, register PICINFO *, int)); ++void CreateJP2KW PARM((void)); ++void JP2KSaveParams PARM((int, char *, int)); ++void JP2KDialog PARM((int vis)); ++int JP2KCheckEvent PARM((register XEvent *)); ++void VersionInfoJP2K PARM((void)); /* GRR 20070304 */ ++ + /**************************** XVJPEG.C ***************************/ + int LoadJFIF PARM((char *, PICINFO *, int)); + void CreateJPEGW PARM((void)); + void JPEGDialog PARM((int)); + int JPEGCheckEvent PARM((XEvent *)); void JPEGSaveParams PARM((char *, int)); ++void VersionInfoJPEG PARM((void)); /* GRR 19980605 */ - /**************************** XVTIFF.C ***************************/ +-/**************************** XVTIFF.C ***************************/ -int LoadTIFF PARM((char *, PICINFO *)); -+int LoadTIFF PARM((char *, PICINFO *, int)); - void CreateTIFFW PARM((void)); - void TIFFDialog PARM((int)); - int TIFFCheckEvent PARM((XEvent *)); -@@ -1628,7 +1665,7 @@ - void CenterMapWindow PARM((Window, int, int, int, int)); - int PopUp PARM((char *, char **, int)); - void ErrPopUp PARM((char *, char *)); +-void CreateTIFFW PARM((void)); +-void TIFFDialog PARM((int)); +-int TIFFCheckEvent PARM((XEvent *)); +-void TIFFSaveParams PARM((char *, int)); ++/**************************** XVMAG.C ***************************/ ++int LoadMAG PARM((char *, PICINFO *)); ++int WriteMAG PARM((FILE *, byte *, int, int, int, ++ byte *, byte *, byte *, int, int, char *)); ++ ++/**************************** XVMAKI.C ***************************/ ++int LoadMAKI PARM((char *, PICINFO *)); ++int WriteMAKI PARM((FILE *, byte *, int, int, int, ++ byte *, byte *, byte *, int, int)); ++ ++/**************************** XVMGCSFX.C ***************************/ ++int is_mgcsfx PARM((char *, unsigned char *, int)); ++char *mgcsfx_auto_input_com PARM((char *)); ++int LoadMGCSFX PARM((char *, PICINFO *)); ++void CreateMGCSFXW PARM((void)); ++void MGCSFXDialog PARM((int)); ++int MGCSFXCheckEvent PARM((XEvent *)); ++int MGCSFXSaveParams PARM((char *, int)); ++ ++int getInputCom PARM((void)); ++int getOutputCom PARM((void)); ++ ++/**************************** XVPBM.C ***************************/ ++#ifdef HAVE_MGCSFX ++int LoadPBM PARM((char *, PICINFO *, int)); ++#else ++int LoadPBM PARM((char *, PICINFO *)); ++#endif ++int WritePBM PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte *, int, int, int, char *)); ++ ++/**************************** XVPCD.C ***************************/ ++int LoadPCD PARM((char *, PICINFO *, int)); ++void CreatePCDW PARM((void)); ++void PCDDialog PARM((int)); ++int PCDCheckEvent PARM((XEvent *)); ++void PCDSetParamOptions PARM((const char *)); ++ ++/**************************** XVPCX.C ***************************/ ++int LoadPCX PARM((char *, PICINFO *)); + + /**************************** XVPDS.C ***************************/ + int LoadPDS PARM((char *, PICINFO *)); + +-/*************************** XVPS.C ***************************/ ++/**************************** XVPI.C ***************************/ ++int LoadPi PARM((char *, PICINFO *)); ++int WritePi PARM((FILE *, byte *, int, int, int, ++ byte *, byte *, byte *, int, int, char *)); ++ ++/**************************** XVPIC.C ***************************/ ++int LoadPIC PARM((char *, PICINFO *)); ++int WritePIC PARM((FILE *, byte *, int, int, int, ++ byte *, byte *, byte *, int, int, char *)); ++ ++/**************************** XVPIC2.C ***************************/ ++int LoadPIC2 PARM((char *, PICINFO *, int)); ++void CreatePIC2W PARM((void)); ++void PIC2Dialog PARM((int)); ++int PIC2CheckEvent PARM((XEvent *)); ++int PIC2SetParamOptions PARM((char *)); ++ ++/**************************** XVPM.C ****************************/ ++int LoadPM PARM((char *, PICINFO *)); ++int WritePM PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte *, int, int, char *)); ++ ++/**************************** XVPNG.C ***************************/ ++int LoadPNG PARM((char *, PICINFO *)); ++void CreatePNGW PARM((void)); ++void PNGDialog PARM((int)); ++int PNGCheckEvent PARM((XEvent *)); ++void PNGSaveParams PARM((char *, int)); ++void VersionInfoPNG PARM((void)); /* GRR 19980605 */ ++ ++/**************************** XVPS.C ****************************/ + void CreatePSD PARM((char *)); + void PSDialog PARM((int)); + int PSCheckEvent PARM((XEvent *)); +@@ -1624,56 +2085,46 @@ + void PSResize PARM((void)); + int LoadPS PARM((char *, PICINFO *, int)); + +-/*************************** XVPOPUP.C ***************************/ +-void CenterMapWindow PARM((Window, int, int, int, int)); +-int PopUp PARM((char *, char **, int)); +-void ErrPopUp PARM((char *, char *)); -int GetStrPopUp PARM((char *, char **, int, char *, int, -+int GetStrPopUp PARM((char *, char **, int, char *, int, - char *, int)); - int GrabPopUp PARM((int *, int *)); - int PadPopUp PARM((int *, char **, int *, int *, int *, int *)); -diff -ruN xv-3.10a/xv24to8.c xv-3.10a-bugfixes/xv24to8.c +- char *, int)); +-int GrabPopUp PARM((int *, int *)); +-int PadPopUp PARM((int *, char **, int *, int *, int *, int *)); +-void ClosePopUp PARM((void)); +-void OpenAlert PARM((char *)); +-void CloseAlert PARM((void)); +-int PUCheckEvent PARM((XEvent *)); +-void TextRect PARM((Window, char *, int, int, int, int, u_long)); ++/**************************** XVRLE.C ***************************/ ++int LoadRLE PARM((char *, PICINFO *)); + +-/*************************** XVDFLT.C ***************************/ +-void LoadDfltPic PARM((PICINFO *)); +-void xbm2pic PARM((byte *, int, int, byte *, int, int, int, int, +- int)); +-void DrawStr2Pic PARM((char *, int, int, byte *, int, int, int)); ++/**************************** XVSUNRAS.C ***************************/ ++int LoadSunRas PARM((char *, PICINFO *)); ++int WriteSunRas PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte*, int, int, int)); + +-/**************************** XVGRAB.C ***************************/ +-int Grab PARM((void)); +-int LoadGrab PARM((PICINFO *)); ++/**************************** XVTARGA.C ***************************/ ++int LoadTarga PARM((char *, PICINFO *)); ++int WriteTarga PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte *, int, int)); + ++/**************************** XVTIFF.C ***************************/ ++int LoadTIFF PARM((char *, PICINFO *, int)); ++void CreateTIFFW PARM((void)); ++void TIFFDialog PARM((int)); ++int TIFFCheckEvent PARM((XEvent *)); ++void TIFFSaveParams PARM((char *, int)); ++void VersionInfoTIFF PARM((void)); /* GRR 19980605 */ + +-/**************************** XVCUT.C ***************************/ +-int CutAllowed PARM((void)); +-int PasteAllowed PARM((void)); +-void DoImgCopy PARM((void)); +-void DoImgCut PARM((void)); +-void DoImgClear PARM((void)); +-void DoImgPaste PARM((void)); ++/**************************** XVWBMP.C ***************************/ ++int LoadWBMP PARM((char *, PICINFO *)); ++int WriteWBMP PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte *, int, int)); + +-void SaveToClip PARM((byte *)); +-void InitSelection PARM((void)); +-int HaveSelection PARM((void)); +-int GetSelType PARM((void)); +-void GetSelRCoords PARM((int *, int *, int *, int *)); +-void EnableSelection PARM((int)); +-void DrawSelection PARM((int)); +-int DoSelection PARM((XButtonEvent *)); +-void MoveGrowSelection PARM((int, int, int, int)); +-void BlinkSelection PARM((int)); +-void FlashSelection PARM((int)); ++/**************************** XVXBM.C ***************************/ ++int LoadXBM PARM((char *, PICINFO *)); ++int WriteXBM PARM((FILE *, byte *, int, int, byte *, byte *, ++ byte *, char *)); + +-void CropRect2Rect PARM((int*,int*,int*,int*, int,int,int,int)); +-void CoordE2C PARM((int, int, int *, int *)); +-void CoordC2E PARM((int, int, int *, int *)); +-void CoordP2C PARM((int, int, int *, int *)); +-void CoordC2P PARM((int, int, int *, int *)); +-void CoordP2E PARM((int, int, int *, int *)); +-void CoordE2P PARM((int, int, int *, int *)); ++/**************************** XVXPM.C ***************************/ ++int LoadXPM PARM((char *, PICINFO *)); ++int WriteXPM PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte *, int, int, char *, char *)); + ++/**************************** XVXWD.C ***************************/ ++int LoadXWD PARM((char *, PICINFO *)); ++ ++/**************************** XVZX.C [JCE] **********************/ ++int LoadZX PARM((char *, PICINFO *)); ++int WriteZX PARM((FILE *, byte *, int, int, int, byte *, ++ byte *, byte *, int, int, char *)); +diff -ru xv-3.10a/xv24to8.c xv-3.10a-enhancements/xv24to8.c --- xv-3.10a/xv24to8.c 1995-01-13 11:49:21.000000000 -0800 -+++ xv-3.10a-bugfixes/xv24to8.c 2004-05-16 18:00:58.000000000 -0700 ++++ xv-3.10a-enhancements/xv24to8.c 2007-05-12 13:56:44.000000000 -0700 @@ -14,15 +14,15 @@ * * The Conv24to8 procedure will set up the following: it will allocate, make @@ -5363,6 +9318,37 @@ diff -ruN xv-3.10a/xv24to8.c xv-3.10a-bugfixes/xv24to8.c * #define PPM_LUMIN(p) \ * ( 0.299 * PPM_GETR(p) + 0.587 * PPM_GETG(p) + 0.114 * PPM_GETB(p) ) */ +@@ -449,18 +449,18 @@ + byte *pic24, *pic8, *rmap, *gmap, *bmap; + int cols, rows, newcolors; + { +- pixel** pixels; +- register pixel* pP; +- int row; +- register int col, limitcol; +- pixval maxval, newmaxval; +- int colors; +- register int index; +- chist_vec chv, colormap; +- chash_table cht; +- int i; +- unsigned char *picptr; +- static char *fn = "ppmquant()"; ++ pixel** pixels; ++ register pixel* pP; ++ int row; ++ register int col, limitcol; ++ pixval maxval, newmaxval; ++ int colors; ++ register int index; ++ chist_vec chv, colormap; ++ chash_table cht; ++ int i; ++ unsigned char *picptr; ++ static const char *fn = "ppmquant()"; + + index = 0; + maxval = 255; @@ -472,7 +472,7 @@ if (DEBUG) fprintf(stderr,"%s: remapping to ppm-style internal fmt\n", fn); @@ -5585,9 +9571,9 @@ diff -ruN xv-3.10a/xv24to8.c xv-3.10a-bugfixes/xv24to8.c numcolors = find_nearby_colors(minc0, minc1, minc2, colorlist); /* Determine the actually nearest colors. */ -diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c +diff -ru xv-3.10a/xvalg.c xv-3.10a-enhancements/xvalg.c --- xv-3.10a/xvalg.c 1994-12-22 14:34:47.000000000 -0800 -+++ xv-3.10a-bugfixes/xvalg.c 2004-05-16 18:01:13.000000000 -0700 ++++ xv-3.10a-enhancements/xvalg.c 2007-05-12 16:07:37.000000000 -0700 @@ -38,7 +38,7 @@ double, int)); static void doPixel PARM((byte *,int,int,byte *, int,int,int,int, @@ -5597,7 +9583,30 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c int, int)); static void doMedianFilter PARM((byte *,int,int,byte *, int,int,int,int, int)); -@@ -89,7 +89,7 @@ +@@ -53,7 +53,7 @@ + static int start24bitAlg PARM((byte **, byte **)); + static void end24bitAlg PARM((byte *, byte *)); + +-static void printUTime PARM((char *)); ++static void printUTime PARM((const char *)); + + static byte *origPic = (byte *) NULL; + static int origPicType; +@@ -70,10 +70,11 @@ + + /***************************/ + static void printUTime(str) +- char *str; ++ const char *str; + { + #ifdef TIMING_TEST +- int i; struct rusage ru; ++ int i; ++ struct rusage ru; + + i = getrusage(RUSAGE_SELF, &ru); + fprintf(stderr,"%s: utime = %d.%d seconds\n", +@@ -89,7 +90,7 @@ /************************************************************/ void AlgInit() { @@ -5606,7 +9615,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c if neccessary, and points it to null */ if (origPic) free(origPic); -@@ -160,7 +160,7 @@ +@@ -160,16 +161,16 @@ { /* runs a n*n convolution mask (all 1's) over 'pic', producing a 24-bit version. Then calls 24to8 to generate a new 8-bit @@ -5615,16 +9624,22 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c Note that 'n' must be odd for things to work properly */ -@@ -169,7 +169,7 @@ - static char *labels[] = { "\nOk", "\033Cancel" }; - char txt[256]; - static char buf[64] = { '3', '\0' }; +- byte *pic24, *tmpPic; +- int i, sx,sy,sw,sh, n; +- static char *labels[] = { "\nOk", "\033Cancel" }; +- char txt[256]; +- static char buf[64] = { '3', '\0' }; - ++ byte *pic24, *tmpPic; ++ int i, sx,sy,sw,sh, n; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char txt[256]; ++ static char buf[64] = { '3', '\0' }; + sprintf(txt, "Blur: \n\n%s", "Enter mask size (ex. 3, 5, 7, ...)"); -@@ -178,7 +178,7 @@ +@@ -178,7 +179,7 @@ n = atoi(buf); if (n < 1 || (n&1)!=1) { @@ -5633,7 +9648,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c "\nOh!"); return; } -@@ -194,7 +194,7 @@ +@@ -194,7 +195,7 @@ if (start24bitAlg(&pic24, &tmpPic)) return; xvbcopy((char *) pic24, (char *) tmpPic, (size_t) (pWIDE*pHIGH*3)); @@ -5642,16 +9657,26 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c doBlurConvolv(pic24, pWIDE,pHIGH, tmpPic, sx,sy,sw,sh, n); end24bitAlg(pic24, tmpPic); -@@ -212,7 +212,7 @@ - static char *labels[] = { "\nOk", "\033Cancel" }; - char txt[256]; - static char buf[64] = { '7', '5', '\0' }; +@@ -207,12 +208,12 @@ + { + /* runs an edge-enhancment algorithm */ + +- byte *pic24, *tmpPic; +- int i, sx,sy,sw,sh, n; +- static char *labels[] = { "\nOk", "\033Cancel" }; +- char txt[256]; +- static char buf[64] = { '7', '5', '\0' }; - ++ byte *pic24, *tmpPic; ++ int i, sx,sy,sw,sh, n; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char txt[256]; ++ static char buf[64] = { '7', '5', '\0' }; + sprintf(txt, "Sharpen: \n\n%s", "Enter enhancement factor (0-99%)"); -@@ -236,7 +236,7 @@ +@@ -236,7 +237,7 @@ if (start24bitAlg(&pic24, &tmpPic)) return; xvbcopy((char *) pic24, (char *) tmpPic, (size_t) (pWIDE*pHIGH*3)); @@ -5660,7 +9685,16 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c doSharpConvolv(pic24, pWIDE,pHIGH, tmpPic, sx,sy,sw,sh, n); end24bitAlg(pic24, tmpPic); -@@ -264,7 +264,7 @@ +@@ -248,7 +249,7 @@ + static void EdgeDetect() + { + byte *pic24, *p24, *tmpPic, *tlp; +- char *str; ++ const char *str; + int i, j, v, maxv, sx,sy,sw,sh; + + WaitCursor(); +@@ -264,7 +265,7 @@ xvbcopy((char *) pic24, (char *) tmpPic, (size_t) (pWIDE*pHIGH*3)); doEdgeConvolv(pic24, pWIDE, pHIGH, tmpPic, sx,sy,sw,sh); @@ -5669,15 +9703,16 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c SetISTR(ISTR_INFO, "%snormalizing...", str); /* Normalize results */ -@@ -292,19 +292,19 @@ +@@ -292,19 +293,19 @@ /************************/ static void TinFoil() { - byte *pic24, *p24, *tmpPic, *tp, *tlp; -+ byte *pic24, *tmpPic, *tp, *tlp; - char *str; +- char *str; - int i, j, v, maxv,sx,sy,sw,sh; - ++ byte *pic24, *tmpPic, *tp, *tlp; ++ const char *str; + int i, j, v, sx,sy,sw,sh; + WaitCursor(); @@ -5695,7 +9730,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c if (start24bitAlg(&pic24, &tmpPic)) return; xvbcopy((char *) pic24, (char *) tmpPic, (size_t) (pWIDE*pHIGH*3)); -@@ -315,9 +315,9 @@ +@@ -315,9 +316,9 @@ *tp++ = 128; *tp++ = 128; *tp++ = 128; } } @@ -5707,7 +9742,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /* mono-ify selected area of tmpPic */ for (i=sy; i<sy+sh; i++) { tp = tlp = tmpPic + (i*pWIDE + sx) * 3; -@@ -327,9 +327,9 @@ +@@ -327,9 +328,9 @@ tp[0] = tp[1] = tp[2] = (byte) v; } } @@ -5719,7 +9754,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /************************/ -@@ -345,7 +345,7 @@ +@@ -345,7 +346,7 @@ if (HaveSelection()) GetSelRCoords(&sx,&sy,&sw,&sh); else { sx = 0; sy = 0; sw = pWIDE; sh = pHIGH; } CropRect2Rect(&sx,&sy,&sw,&sh, 0,0,pWIDE,pHIGH); @@ -5728,7 +9763,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c if (start24bitAlg(&pic24, &tmpPic)) return; xvbcopy((char *) pic24, (char *) tmpPic, (size_t) (pWIDE*pHIGH*3)); -@@ -365,7 +365,7 @@ +@@ -365,7 +366,7 @@ if (HaveSelection()) GetSelRCoords(&sx,&sy,&sw,&sh); else { sx = 0; sy = 0; sw = pWIDE; sh = pHIGH; } CropRect2Rect(&sx,&sy,&sw,&sh, 0,0,pWIDE,pHIGH); @@ -5737,7 +9772,26 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c WaitCursor(); if (start24bitAlg(&pic24, &tmpPic)) return; -@@ -396,12 +396,12 @@ +@@ -381,12 +382,12 @@ + static void FineRotate(clr) + int clr; + { +- byte *pic24, *tmpPic; +- int i,sx,sy,sw,sh; +- double rotval; +- static char *labels[] = { "\nOk", "\033Cancel" }; +- char txt[256]; +- static char buf[64] = { '\0' }; ++ byte *pic24, *tmpPic; ++ int i,sx,sy,sw,sh; ++ double rotval; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char txt[256]; ++ static char buf[64] = { '\0' }; + + sprintf(txt, "Rotate (%s):\n\nEnter rotation angle, in degrees: (>0 = CCW)", + (clr ? "Clear" : "Copy")); +@@ -396,12 +397,12 @@ rotval = atof(buf); if (rotval == 0.0) return; @@ -5752,7 +9806,24 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c WaitCursor(); if (start24bitAlg(&pic24, &tmpPic)) return; -@@ -443,11 +443,11 @@ +@@ -416,11 +417,11 @@ + /************************/ + static void Pixelize() + { +- byte *pic24, *tmpPic; +- int i,sx,sy,sw,sh, pixX,pixY,err; +- static char *labels[] = { "\nOk", "\033Cancel" }; +- char txt[256]; +- static char buf[64] = { '4', '\0' }; ++ byte *pic24, *tmpPic; ++ int i,sx,sy,sw,sh, pixX,pixY,err; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char txt[256]; ++ static char buf[64] = { '4', '\0' }; + + sprintf(txt, "Pixelize:\n\nEnter new pixel size, in image pixels: %s", + "(ex. '3', '5x8')"); +@@ -443,11 +444,11 @@ return; } @@ -5766,7 +9837,24 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c WaitCursor(); if (start24bitAlg(&pic24, &tmpPic)) return; -@@ -493,11 +493,11 @@ +@@ -463,11 +464,11 @@ + /************************/ + static void Spread() + { +- byte *pic24, *tmpPic; +- int i,sx,sy,sw,sh, pixX,pixY,err; +- static char *labels[] = { "\nOk", "\033Cancel" }; +- char txt[256]; +- static char buf[64] = { '5', '\0' }; ++ byte *pic24, *tmpPic; ++ int i,sx,sy,sw,sh, pixX,pixY,err; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char txt[256]; ++ static char buf[64] = { '5', '\0' }; + + sprintf(txt, "Spread:\n\nEnter spread factor (or x,y factors): %s", + "(ex. '10', '1x5')"); +@@ -493,11 +494,11 @@ return; } @@ -5780,16 +9868,26 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c WaitCursor(); if (start24bitAlg(&pic24, &tmpPic)) return; -@@ -521,7 +521,7 @@ - static char *labels[] = { "\nOk", "\033Cancel" }; - char txt[256]; - static char buf[64] = { '3', '\0' }; -- +@@ -516,12 +517,12 @@ + /* runs median filter algorithm (for n*n rect centered around each pixel, + replace with median value */ + +- byte *pic24, *tmpPic; +- int i, sx,sy,sw,sh, n; +- static char *labels[] = { "\nOk", "\033Cancel" }; +- char txt[256]; +- static char buf[64] = { '3', '\0' }; +- ++ byte *pic24, *tmpPic; ++ int i, sx,sy,sw,sh, n; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char txt[256]; ++ static char buf[64] = { '3', '\0' }; + sprintf(txt, "DeSpeckle (median filter): \n\n%s", "Enter mask size (ex. 3, 5, 7, ...)"); -@@ -530,7 +530,7 @@ +@@ -530,7 +531,7 @@ n = atoi(buf); if (n < 1 || (n&1)!=1) { @@ -5798,7 +9896,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c "\nOh!"); return; } -@@ -546,7 +546,7 @@ +@@ -546,7 +547,7 @@ if (start24bitAlg(&pic24, &tmpPic)) return; xvbcopy((char *) pic24, (char *) tmpPic, (size_t) (pWIDE*pHIGH*3)); @@ -5807,7 +9905,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c doMedianFilter(pic24, pWIDE,pHIGH, tmpPic, sx,sy,sw,sh, n); end24bitAlg(pic24, tmpPic); -@@ -560,7 +560,7 @@ +@@ -560,7 +561,7 @@ int w,h, selx,sely,selw,selh, n; { @@ -5816,7 +9914,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c Operates on rectangular region 'selx,sely,selw,selh' (in pic coords) Region is guaranteed to be completely within pic boundaries 'n' must be odd */ -@@ -568,7 +568,7 @@ +@@ -568,7 +569,7 @@ register byte *p24; register int rsum,gsum,bsum; byte *rp; @@ -5825,7 +9923,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c printUTime("start of blurConvolv"); -@@ -589,7 +589,7 @@ +@@ -589,7 +590,7 @@ for (y1=y-n2; y1<=y+n2; y1++) { if (y1>=sely && y1<sely+selh) { @@ -5834,7 +9932,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c for (x1=x-n2; x1<=x+n2; x1++) { if (x1>=selx && x1<selx+selw) { -@@ -631,7 +631,7 @@ +@@ -631,7 +632,7 @@ byte *p24; int rv, gv, bv; byte *rp; @@ -5843,7 +9941,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c double fact, ifact, hue,sat,val, vsum; double *linem1, *line0, *linep1, *tmpptr; -@@ -673,7 +673,7 @@ +@@ -673,7 +674,7 @@ for (y=sely+1; y<(sely+selh)-1; y++) { ProgressMeter(sely+1, (sely+selh)-2, y, "Sharpen"); if ((y & 15) == 0) WaitCursor(); @@ -5852,7 +9950,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c tmpptr = linem1; linem1 = line0; line0 = linep1; linep1 = tmpptr; /* get next line */ -@@ -691,7 +691,7 @@ +@@ -691,7 +692,7 @@ vsum = linem1[i-1] + linem1[i] + linem1[i+1] + line0 [i-1] + line0 [i] + line0 [i+1] + linep1[i-1] + linep1[i] + linep1[i+1]; @@ -5861,7 +9959,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c rgb2hsv((int) p24[0], (int) p24[1], (int) p24[2], &hue, &sat, &val); val = ((val - (fact * vsum) / 9) / ifact); -@@ -723,22 +723,22 @@ +@@ -723,22 +724,22 @@ { /* convolves with two edge detection masks (vertical and horizontal) @@ -5888,7 +9986,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c Also, only does pixels in which the masks fit fully onto the picture (no pesky boundary conditionals) */ -@@ -746,7 +746,7 @@ +@@ -746,7 +747,7 @@ register byte *p24; register int bperlin, a, b, c, d, rsum, gsum, bsum; byte *rp; @@ -5897,7 +9995,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c printUTime("start of edgeConvolv"); -@@ -818,13 +818,13 @@ +@@ -818,13 +819,13 @@ { /* convolves with edge detection mask, at 45 degrees to horizontal. @@ -5913,7 +10011,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c Also, only does pixels in which the masks fit fully onto the picture (no pesky boundary conditionals) -@@ -833,7 +833,7 @@ +@@ -833,7 +834,7 @@ register byte *p24; register int bperlin,rsum,gsum,bsum; byte *rp; @@ -5922,7 +10020,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c printUTime("start of doAngleConvolv"); -@@ -912,14 +912,14 @@ +@@ -912,14 +913,14 @@ for each pixel in the image (assume, for a second, a grayscale image), compute a histogram of the n*n rectangle centered on the pixel. replace the pixel with the color that had the greatest # of hits in @@ -5939,7 +10037,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c byte *rp, *p24, *plin; int i,j,k,x,y,n2,col,cnt,maxcnt; int *nnrect; -@@ -933,7 +933,7 @@ +@@ -933,7 +934,7 @@ /* nnrect[] is an n*n array of ints, with '-1' meaning 'outside the region' otherwise they'll have 24-bit RGB values */ @@ -5948,7 +10046,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c nnrect = (int *) malloc(n * n * sizeof(int)); if (!nnrect) FatalError("can't malloc nnrect[] in doOilPaint()\n"); -@@ -943,13 +943,13 @@ +@@ -943,13 +944,13 @@ p24 = pic24 + ((y-n2)*w + selx-n2)*3; /* pts to top-left of mask */ rp = results + (y*w + selx)*3; @@ -5964,7 +10062,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c nnrect[k] = (((int) pp[0])<<16) | (((int) pp[1])<<8) | pp[2]; } else nnrect[k] = -1; -@@ -957,7 +957,7 @@ +@@ -957,7 +958,7 @@ plin += bperlin; pp = plin; } @@ -5973,7 +10071,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /* find 'most popular color' in nnrect, not counting '-1' */ maxcnt = cnt = col = 0; for (i=0; i<n*n; i++) { -@@ -1021,7 +1021,7 @@ +@@ -1021,7 +1022,7 @@ p24 = pic24 + (y*w + selx) * 3; rf += (double) p24[0]; gf += (double) p24[1]; bf += (double) p24[2]; i++; @@ -5982,7 +10080,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c p24 = pic24 + (y*w + (selx+selw-1)) * 3; rf += (double) p24[0]; gf += (double) p24[1]; bf += (double) p24[2]; i++; -@@ -1047,7 +1047,7 @@ +@@ -1047,7 +1048,7 @@ if (dx==0 && dy==0) { ex = selx; ey = sely; } /* don't care */ else if (dx==0) { ex = cx; ey = (dy<0) ? sely : sely+selh-1; } else if (dy==0) { ey = cy; ex = (dx<0) ? selx : selx+selw-1; } @@ -5991,7 +10089,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c slope = ((double) dy) / dx; if (fabs(slope) > fabs(dslope)) { /* y axis is major */ ey = (dy<0) ? sely : sely+selh-1; -@@ -1092,7 +1092,7 @@ +@@ -1092,7 +1093,7 @@ printUTime("end of blend"); } @@ -6000,7 +10098,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /************************/ static void doRotate(pic24, w, h, results, selx,sely,selw,selh, rotval, clear) -@@ -1104,7 +1104,7 @@ +@@ -1104,7 +1105,7 @@ by the amount specified in degrees (rotval), and stores the result in 'results', which is also a w*h 24-bit image. The rotated bits are clipped to fit in 'results'. If 'clear', the (unrotated) rectangular @@ -6009,7 +10107,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c sel[x,y,w,h] is guaranteed to be within image bounds */ byte *pp, *dp; -@@ -1118,7 +1118,7 @@ +@@ -1118,7 +1119,7 @@ printUTime("start of rotate"); /* @@ -6018,7 +10116,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c * rx1,ry1 - top-left of sel, rotated * rx2,ry2 - bot-left of sel, rotated * rx3,ry3 - top-right of sel, rotated -@@ -1174,7 +1174,7 @@ +@@ -1174,7 +1175,7 @@ /* now, for each pixel in rb[x,y,w,h], do the inverse rotation to see if it would be in the original unrotated selection rectangle. if it *is*, compute and store an appropriate color, otherwise skip it */ @@ -6027,7 +10125,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c for (y=rby; y<rby+rbh; y++) { dp = results + (y * w + rbx) * 3; -@@ -1194,7 +1194,7 @@ +@@ -1194,7 +1195,7 @@ int p0r,p0g,p0b, p1r,p1g,p1b, p2r,p2g,p2b, p3r,p3g,p3b; int rv,gv,bv; double rd,gd,bd, p0wgt, p1wgt, p2wgt, p3wgt; @@ -6036,7 +10134,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /* compute the color, same idea as in Smooth**(). The color will be a linear combination of the colors of the center pixel, its left-or-right neighbor, its top-or-bottom neighbor, and -@@ -1265,9 +1265,9 @@ +@@ -1265,9 +1266,9 @@ } #endif /* ROTATE_FOO */ @@ -6049,7 +10147,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c } } } -@@ -1311,11 +1311,11 @@ +@@ -1311,11 +1312,11 @@ #ifdef FOO fprintf(stderr,"rotXfer: rotating (%4d,%4d) %7.2f degrees around", x,y, rad*180.0 / M_PI); @@ -6063,7 +10161,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /************************/ -@@ -1323,29 +1323,29 @@ +@@ -1323,29 +1324,29 @@ byte *pic24, *results; int w, h, selx,sely,selw,selh, pixX,pixY; { @@ -6101,7 +10199,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /* COMPUTE AVERAGE COLOR FOR RECT:[x,y,pixX,pixY] */ nsum = rsum = gsum = bsum = 0; for (y1=y; y1<y+pixY; y1++) { -@@ -1357,17 +1357,17 @@ +@@ -1357,17 +1358,17 @@ } } } @@ -6123,7 +10221,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c pp = results + (y1 * w + x) * 3; for (x1=x; x1<x+pixX; x1++, pp+=3) { if (PTINRECT(x1,y1, selx,sely,selw,selh)) { -@@ -1381,7 +1381,7 @@ +@@ -1381,7 +1382,7 @@ printUTime("end of pixelize"); } @@ -6132,7 +10230,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /************************/ static void doSpread(pic24, w, h, results, selx,sely,selw,selh, pixX, pixY) -@@ -1393,17 +1393,17 @@ +@@ -1393,17 +1394,17 @@ by pixX,pixY. If pixX<0, it is treated as a single 'distance' value (after being abs()'d). */ @@ -6154,7 +10252,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c printUTime("start of spread"); for (y=sely; y<sely+selh; y++) { -@@ -1453,7 +1453,7 @@ +@@ -1453,7 +1454,7 @@ printUTime("end of spread"); } @@ -6163,7 +10261,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c /************************/ static void doMedianFilter(pic24, w, h, results, selx,sely,selw,selh, n) -@@ -1468,7 +1468,7 @@ +@@ -1468,7 +1469,7 @@ register byte *p24; register int rsum,gsum,bsum; byte *rp; @@ -6172,7 +10270,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c int *rtab, *gtab, *btab; printUTime("start of doMedianFilter"); -@@ -1494,7 +1494,7 @@ +@@ -1494,7 +1495,7 @@ for (y1=y-n2; y1<=y+n2; y1++) { if (y1>=sely && y1<sely+selh) { @@ -6181,7 +10279,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c for (x1=x-n2; x1<=x+n2; x1++) { if (x1>=selx && x1<selx+selw) { -@@ -1509,12 +1509,12 @@ +@@ -1509,12 +1510,12 @@ } @@ -6198,7 +10296,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c for (d=count/2; d>0; d=d/2) { for (i=d; i<count; i++) { for (j=i-d; j>=0 && rtab[j]>rtab[j+d]; j-=d) { -@@ -1531,14 +1531,14 @@ +@@ -1531,14 +1532,14 @@ } } } @@ -6215,7 +10313,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c free(rtab); free(gtab); free(btab); printUTime("end of doMedianFilter"); } -@@ -1549,7 +1549,7 @@ +@@ -1549,7 +1550,7 @@ static void intsort(a, n) int *a, n; { @@ -6224,7 +10322,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c we'll be using, should be quicker than qsort() because of all the function calling overhead associated with qsort(). */ -@@ -1571,7 +1571,7 @@ +@@ -1571,7 +1572,7 @@ byte **pic24, **tmpPic; { /* generates a 24-bit version of 'pic', if neccessary, and also mallocs @@ -6233,7 +10331,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c * * Returns '1' if there's some sort of screwup, '0' if cool */ -@@ -1588,7 +1588,7 @@ +@@ -1588,7 +1589,7 @@ *tmpPic = (byte *) calloc((size_t) (pWIDE * pHIGH * 3), (size_t) 1); if (!(*tmpPic)) { SetCursors(-1); @@ -6242,7 +10340,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c "\nTough!"); if (picType == PIC8) free(*pic24); return 1; -@@ -1609,16 +1609,16 @@ +@@ -1609,16 +1610,16 @@ saveOrigPic(); /* also kills pic/cpic/epic/egampic/theImage, NOT pic24 */ /* copy results to pic24 */ @@ -6262,7 +10360,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c return; } } -@@ -1632,7 +1632,7 @@ +@@ -1632,7 +1633,7 @@ static void saveOrigPic() { /* saves original picture into origPic, if it hasn't already been done. @@ -6271,7 +10369,7 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c Also, frees all pics, (except 'pic', if we're in PIC24 mode) */ -@@ -1649,7 +1649,7 @@ +@@ -1649,7 +1650,7 @@ /* make a backup copy of 'pic' */ origPic = (byte *) malloc((size_t)(pWIDE*pHIGH*((picType==PIC8) ? 1 : 3))); if (!origPic) FatalError("out of memory in 'saveOrigPic()'"); @@ -6280,32 +10378,105 @@ diff -ruN xv-3.10a/xvalg.c xv-3.10a-bugfixes/xvalg.c (size_t) (pWIDE * pHIGH * ((picType==PIC8) ? 1 : 3))); origPicType = picType; -diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c +diff -ru xv-3.10a/xvbmp.c xv-3.10a-enhancements/xvbmp.c --- xv-3.10a/xvbmp.c 1994-12-22 14:34:42.000000000 -0800 -+++ xv-3.10a-bugfixes/xvbmp.c 2005-03-27 18:12:17.000000000 -0800 -@@ -14,7 +14,7 @@ - rest of the pic is filled with 0's. ++++ xv-3.10a-enhancements/xvbmp.c 2007-05-13 17:46:16.000000000 -0700 +@@ -1,5 +1,5 @@ + /* +- * xvbmp.c - i/o routines for .BMP files (MS Windows 3.x) ++ * xvbmp.c - I/O routines for .BMP files (MS Windows 3.x and later; OS/2) + * + * LoadBMP(fname, numcols) + * WriteBMP(fp, pic, ptype, w, h, r, g, b, numcols, style); +@@ -9,30 +9,39 @@ - a file with garbage characters in it is an unloadable file. All allocated + #include "xv.h" + +-/* comments on error handling: +- a truncated file is not considered a Major Error. The file is loaded, the +- rest of the pic is filled with 0's. +- +- a file with garbage characters in it is an unloadable file. All allocated - stuff is tossed, and LoadPBM returns non-zero -+ stuff is tossed, and LoadBMP returns non-zero +- +- not being able to malloc is a Fatal Error. The program is aborted. */ +- +- +-#define BI_RGB 0 +-#define BI_RLE8 1 +-#define BI_RLE4 2 ++/* Comments on error-handling: ++ A truncated file is not considered a Major Error. The file is loaded, ++ and the rest of the pic is filled with 0's. ++ ++ A file with garbage characters in it is an unloadable file. All allocated ++ stuff is tossed, and LoadBMP returns non-zero. ++ ++ Not being able to malloc is a Fatal Error. The program is aborted. */ ++ ++ ++#define BI_RGB 0 /* a.k.a. uncompressed */ ++#define BI_RLE8 1 ++#define BI_RLE4 2 ++#define BI_BITFIELDS 3 /* BMP version 4 */ ++#define BI_JPEG 4 /* BMP version 5 (not yet supported) */ ++#define BI_PNG 5 /* BMP version 5 (not yet supported) */ + + #define WIN_OS2_OLD 12 + #define WIN_NEW 40 + #define OS2_NEW 64 - not being able to malloc is a Fatal Error. The program is aborted. */ ++#if (defined(UINT_MAX) && UINT_MAX != 0xffffffffU) ++# error XV's BMP code requires 32-bit unsigned integer type, but u_int isn't ++#endif ++ + static long filesize; -@@ -54,9 +54,9 @@ + static int loadBMP1 PARM((FILE *, byte *, u_int, u_int)); + static int loadBMP4 PARM((FILE *, byte *, u_int, u_int, u_int)); + static int loadBMP8 PARM((FILE *, byte *, u_int, u_int, u_int)); +-static int loadBMP24 PARM((FILE *, byte *, u_int, u_int)); ++static int loadBMP16 PARM((FILE *, byte *, u_int, u_int, u_int *)); ++static int loadBMP24 PARM((FILE *, byte *, u_int, u_int, u_int)); ++static int loadBMP32 PARM((FILE *, byte *, u_int, u_int, u_int *)); + static u_int getshort PARM((FILE *)); + static u_int getint PARM((FILE *)); + static void putshort PARM((FILE *, int)); +@@ -41,7 +50,7 @@ + static void writeBMP4 PARM((FILE *, byte *, int, int)); + static void writeBMP8 PARM((FILE *, byte *, int, int)); + static void writeBMP24 PARM((FILE *, byte *, int, int)); +-static int bmpError PARM((char *, char *)); ++static int bmpError PARM((const char *, const char *)); + + + #define FERROR(fp) (ferror(fp) || feof(fp)) +@@ -52,15 +61,15 @@ + PICINFO *pinfo; + /*******************************************/ { - FILE *fp; - int i, c, c1, rv; +- FILE *fp; +- int i, c, c1, rv; - unsigned int bfSize, bfOffBits, biSize, biWidth, biHeight, biPlanes; - unsigned int biBitCount, biCompression, biSizeImage, biXPelsPerMeter; - unsigned int biYPelsPerMeter, biClrUsed, biClrImportant; -+ u_int bfSize, bfOffBits, biSize, biWidth, biHeight, biPlanes; -+ u_int biBitCount, biCompression, biSizeImage, biXPelsPerMeter; -+ u_int biYPelsPerMeter, biClrUsed, biClrImportant; - int bPad; - char *cmpstr; - byte *pic24, *pic8; -@@ -69,7 +69,7 @@ +- int bPad; +- char *cmpstr; +- byte *pic24, *pic8; +- char buf[512], *bname; ++ FILE *fp; ++ int i, c, c1, rv, bPad; ++ u_int bfSize, bfOffBits, biSize, biWidth, biHeight, biPlanes; ++ u_int biBitCount, biCompression, biSizeImage, biXPelsPerMeter; ++ u_int biYPelsPerMeter, biClrUsed, biClrImportant; ++ u_int colormask[3]; ++ char buf[512], rgb_bits[16]; ++ const char *cmpstr, *bname; ++ byte *pic24, *pic8; + + /* returns '1' on success */ + +@@ -69,7 +78,7 @@ fp = xv_fopen(fname,"r"); if (!fp) return (bmpError(bname, "couldn't open file")); @@ -6314,13 +10485,20 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c fseek(fp, 0L, 2); /* figure out the file size */ filesize = ftell(fp); fseek(fp, 0L, 0); -@@ -104,11 +104,11 @@ +@@ -98,17 +107,16 @@ + biClrUsed = getint(fp); + biClrImportant = getint(fp); + } +- + else { /* old bitmap format */ + biWidth = getshort(fp); /* Types have changed ! */ biHeight = getshort(fp); biPlanes = getshort(fp); biBitCount = getshort(fp); - +- /* Not in old versions so have to compute them*/ + - /* Not in old versions so have to compute them*/ ++ /* not in old versions, so have to compute them */ biSizeImage = (((biPlanes * biBitCount*biWidth)+31)/32)*4*biHeight; - - biCompression = BI_RGB; @@ -6329,48 +10507,80 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c biXPelsPerMeter = biYPelsPerMeter = 0; biClrUsed = biClrImportant = 0; } -@@ -127,11 +127,14 @@ +@@ -126,22 +134,39 @@ + if (FERROR(fp)) { bmpError(bname,"EOF reached in file header"); goto ERROR; } - /* error checking */ +- /* error checking */ - if ((biBitCount!=1 && biBitCount!=4 && biBitCount!=8 && biBitCount!=24) || - biPlanes!=1 || biCompression>BI_RLE4) { -- -- sprintf(buf,"Bogus BMP File! (bitCount=%d, Planes=%d, Compression=%d)", -- biBitCount, biPlanes, biCompression); -+ if ((biBitCount!=1 && biBitCount!=4 && biBitCount!=8 && biBitCount!=24) || -+ biPlanes!=1 || biCompression>BI_RLE4 || ++ /* error-checking */ ++ if ((biBitCount!=1 && biBitCount!=4 && biBitCount!=8 && ++ biBitCount!=16 && biBitCount!=24 && biBitCount!=32) || ++ biPlanes!=1 || biCompression>BI_PNG || + biWidth<=0 || biHeight<=0 || + (biClrUsed && biClrUsed > (1 << biBitCount))) { + + sprintf(buf, -+ "Bogus BMP File! (%dx%d, Bits=%d, Colors=%d, Planes=%d, Compr=%d)", ++ "Unsupported BMP type (%dx%d, Bits=%d, Colors=%d, Planes=%d, " ++ "Compr=%d)", + biWidth, biHeight, biBitCount, biClrUsed, biPlanes, biCompression); +- sprintf(buf,"Bogus BMP File! (bitCount=%d, Planes=%d, Compression=%d)", +- biBitCount, biPlanes, biCompression); ++ bmpError(bname, buf); ++ goto ERROR; ++ } ++ ++ if (biCompression>BI_BITFIELDS) { ++ sprintf(buf, "Unsupported BMP compression method (%s)", ++ biCompression == BI_JPEG? "JPEG" : ++ biCompression == BI_PNG? "PNG" : ++ "unknown/newer than v5"); + bmpError(bname, buf); goto ERROR; -@@ -154,7 +157,7 @@ + } + + if (((biBitCount==1 || biBitCount==24) && biCompression != BI_RGB) || +- (biBitCount==4 && biCompression==BI_RLE8) || +- (biBitCount==8 && biCompression==BI_RLE4)) { ++ (biBitCount==4 && biCompression!=BI_RGB && biCompression!=BI_RLE4) || ++ (biBitCount==8 && biCompression!=BI_RGB && biCompression!=BI_RLE8) || ++ ((biBitCount==16 || biBitCount==32) && ++ biCompression!=BI_RGB && biCompression!=BI_BITFIELDS)) { + +- sprintf(buf,"Bogus BMP File! (bitCount=%d, Compression=%d)", ++ sprintf(buf,"Unsupported BMP type (bitCount=%d, Compression=%d)", + biBitCount, biCompression); + + bmpError(bname, buf); +@@ -153,13 +178,21 @@ + if (biSize != WIN_OS2_OLD) { /* skip ahead to colormap, using biSize */ c = biSize - 40; /* 40 bytes read from biSize to biClrImportant */ - for (i=0; i<c; i++) getc(fp); +- for (i=0; i<c; i++) getc(fp); - -+ ++ for (i=0; i<c; i++) ++ getc(fp); bPad = bfOffBits - (biSize + 14); } -@@ -162,6 +165,11 @@ - if (biBitCount!=24) { ++ /* 16-bit or 32-bit color mask */ ++ if (biCompression==BI_BITFIELDS) { ++ colormask[0] = getint(fp); ++ colormask[1] = getint(fp); ++ colormask[2] = getint(fp); ++ bPad -= 12; ++ } ++ + /* load up colormap, if any */ +- if (biBitCount!=24) { ++ if (biBitCount == 1 || biBitCount == 4 || biBitCount == 8) { int i, cmaplen; -+/* this is superfluous; see identical test in "error checking" block above -+ if (biClrUsed > (1 << biBitCount)) -+ biClrUsed = (1 << biBitCount); -+ */ -+ cmaplen = (biClrUsed) ? biClrUsed : 1 << biBitCount; - for (i=0; i<cmaplen; i++) { - pinfo->b[i] = getc(fp); -@@ -173,7 +181,7 @@ +@@ -173,7 +206,7 @@ } } @@ -6379,7 +10589,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c { bmpError(bname,"EOF reached in BMP colormap"); goto ERROR; } if (DEBUG>1) { -@@ -188,7 +196,7 @@ +@@ -188,7 +221,7 @@ if (biSize != WIN_OS2_OLD) { /* Waste any unused bytes between the colour map (if present) and the start of the actual bitmap data. */ @@ -6388,11 +10598,13 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c while (bPad > 0) { (void) getc(fp); bPad--; -@@ -198,11 +206,21 @@ +@@ -197,31 +230,57 @@ + /* create pic8 or pic24 */ - if (biBitCount==24) { +- if (biBitCount==24) { - pic24 = (byte *) calloc((size_t) biWidth * biHeight * 3, (size_t) 1); ++ if (biBitCount==16 || biBitCount==24 || biBitCount==32) { + u_int npixels = biWidth * biHeight; + u_int count = 3 * npixels; + @@ -6412,16 +10624,73 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c if (!pic8) return(bmpError(bname, "couldn't malloc 'pic8'")); } -@@ -216,7 +234,7 @@ - biCompression); - else rv = loadBMP24(fp,pic24,biWidth,biHeight); + WaitCursor(); -- if (rv) bmpError(bname, "File appears truncated. Winging it.\n"); + /* load up the image */ +- if (biBitCount == 1) rv = loadBMP1(fp,pic8,biWidth,biHeight); +- else if (biBitCount == 4) rv = loadBMP4(fp,pic8,biWidth,biHeight, +- biCompression); +- else if (biBitCount == 8) rv = loadBMP8(fp,pic8,biWidth,biHeight, +- biCompression); +- else rv = loadBMP24(fp,pic24,biWidth,biHeight); ++ switch (biBitCount) { ++ case 1: ++ rv = loadBMP1(fp, pic8, biWidth, biHeight); ++ break; ++ case 4: ++ rv = loadBMP4(fp, pic8, biWidth, biHeight, biCompression); ++ break; ++ case 8: ++ rv = loadBMP8(fp, pic8, biWidth, biHeight, biCompression); ++ break; ++ case 16: ++ rv = loadBMP16(fp, pic24, biWidth, biHeight, /* v-- BI_RGB */ ++ biCompression == BI_BITFIELDS? colormask : NULL); ++ break; ++ default: ++ if (biBitCount == 32 && biCompression == BI_BITFIELDS) ++ rv = loadBMP32(fp, pic24, biWidth, biHeight, colormask); ++ else /* 24 or (32 and BI_RGB) */ ++ rv = loadBMP24(fp, pic24, biWidth, biHeight, biBitCount); ++ break; ++ } ++ + if (rv) bmpError(bname, "File appears truncated. Winging it."); +- if (rv) bmpError(bname, "File appears truncated. Winging it.\n"); + fclose(fp); -@@ -254,7 +272,7 @@ + +- if (biBitCount == 24) { ++ if (biBitCount > 8) { + pinfo->pic = pic24; + pinfo->type = PIC24; + } +@@ -233,6 +292,22 @@ + cmpstr = ""; + if (biCompression == BI_RLE4) cmpstr = ", RLE4 compressed"; + else if (biCompression == BI_RLE8) cmpstr = ", RLE8 compressed"; ++ else if (biCompression == BI_BITFIELDS) { ++ int bit, c[3], i; ++ u_int mask; ++ ++ for (i = 0; i < 3; ++i) { ++ mask = colormask[i]; ++ c[i] = 0; ++ for (bit = 0; bit < 32; ++bit) { ++ if (mask & 1) ++ ++c[i]; ++ mask >>= 1; ++ } ++ } ++ sprintf(rgb_bits, ", RGB%d%d%d", c[0], c[1], c[2]); ++ cmpstr = rgb_bits; ++ } + + pinfo->w = biWidth; pinfo->h = biHeight; + pinfo->normw = pinfo->w; pinfo->normh = pinfo->h; +@@ -254,7 +329,7 @@ ERROR: fclose(fp); return 0; @@ -6430,7 +10699,23 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c /*******************************************/ -@@ -277,7 +295,7 @@ +@@ -264,12 +339,13 @@ + u_int w,h; + { + int i,j,c,bitnum,padw; +- byte *pp; ++ byte *pp = pic8 + ((h - 1) * w); ++ size_t l = w*h; + + c = 0; + padw = ((w + 31)/32) * 32; /* 'w', padded to be a multiple of 32 */ + +- for (i=h-1; i>=0; i--) { ++ for (i=h-1; i>=0 && (pp - pic8 <= l); i--) { + pp = pic8 + (i * w); + if ((i&0x3f)==0) WaitCursor(); + for (j=bitnum=0; j<padw; j++,bitnum++) { +@@ -277,7 +353,7 @@ c = getc(fp); bitnum = 0; } @@ -6439,7 +10724,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c if (j<w) { *pp++ = (c & 0x80) ? 1 : 0; c <<= 1; -@@ -287,7 +305,7 @@ +@@ -287,7 +363,7 @@ } return (FERROR(fp)); @@ -6448,13 +10733,15 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c -@@ -299,24 +317,24 @@ +@@ -298,25 +374,25 @@ + u_int w,h,comp; { int i,j,c,c1,x,y,nybnum,padw,rv; - byte *pp; +- byte *pp; - - -+ ++ byte *pp = pic8 + ((h - 1) * w); ++ size_t l = w*h; + rv = 0; c = c1 = 0; @@ -6463,8 +10750,9 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c if (comp == BI_RGB) { /* read uncompressed data */ padw = ((w + 7)/8) * 8; /* 'w' padded to a multiple of 8pix (32 bits) */ - +- for (i=h-1; i>=0; i--) { + - for (i=h-1; i>=0; i--) { ++ for (i=h-1; i>=0 && (pp - pic8 <= l); i--) { pp = pic8 + (i * w); if ((i&0x3f)==0) WaitCursor(); - @@ -6479,7 +10767,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c if (j<w) { *pp++ = (c & 0xf0) >> 4; c <<= 4; -@@ -325,55 +343,55 @@ +@@ -325,55 +401,55 @@ if (FERROR(fp)) break; } } @@ -6498,7 +10786,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c if (c) { /* encoded mode */ c1 = getc(fp); - for (i=0; i<c; i++,x++,pp++) -+ for (i=0; i<c; i++,x++,pp++) ++ for (i=0; i<c && (pp - pic8 <= l); i++,x++,pp++) *pp = (i&1) ? (c1 & 0x0f) : ((c1>>4)&0x0f); } - @@ -6524,7 +10812,8 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c - + else { /* absolute mode */ - for (i=0; i<c; i++, x++, pp++) { +- for (i=0; i<c; i++, x++, pp++) { ++ for (i=0; i<c && (pp - pic8 <= l); i++, x++, pp++) { if ((i&1) == 0) c1 = getc(fp); *pp = (i&1) ? (c1 & 0x0f) : ((c1>>4)&0x0f); } @@ -6550,16 +10839,29 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c -@@ -385,7 +403,7 @@ +@@ -384,14 +460,18 @@ + u_int w,h,comp; { int i,j,c,c1,padw,x,y,rv; - byte *pp; +- byte *pp; - ++ byte *pp = pic8 + ((h - 1) * w); ++ size_t l = w*h; ++ byte *pend; + rv = 0; ++ pend = pic8 + w * h; ++ if (comp == BI_RGB) { /* read uncompressed data */ -@@ -404,7 +422,7 @@ + padw = ((w + 3)/4) * 4; /* 'w' padded to a multiple of 4pix (32 bits) */ + +- for (i=h-1; i>=0; i--) { ++ for (i=h-1; i>=0 && (pp - pic8 <= l); i--) { + pp = pic8 + (i * w); + if ((i&0x3f)==0) WaitCursor(); + +@@ -404,15 +484,15 @@ } else if (comp == BI_RLE8) { /* read RLE8 compressed data */ @@ -6567,8 +10869,18 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c + x = y = 0; pp = pic8 + x + (h-y-1)*w; - while (y<h) { -@@ -420,7 +438,7 @@ +- while (y<h) { ++ while (y<h && pp<=pend) { + c = getc(fp); if (c == EOF) { rv = 1; break; } + + if (c) { /* encoded mode */ + c1 = getc(fp); +- for (i=0; i<c; i++,x++,pp++) *pp = c1; ++ for (i=0; i<c && pp<=pend; i++,x++,pp++) *pp = c1; + } + + else { /* c==0x00 : escape codes */ +@@ -420,7 +500,7 @@ if (c == 0x00) { /* end of line */ x=0; y++; pp = pic8 + x + (h-y-1)*w; @@ -6577,7 +10889,12 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c else if (c == 0x01) break; /* end of pic8 */ -@@ -435,21 +453,21 @@ +@@ -431,49 +511,156 @@ + } + + else { /* absolute mode */ +- for (i=0; i<c; i++, x++, pp++) { ++ for (i=0; i<c && pp<=pend; i++, x++, pp++) { c1 = getc(fp); *pp = c1; } @@ -6602,21 +10919,212 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c -@@ -469,7 +487,7 @@ + /*******************************************/ +-static int loadBMP24(fp, pic24, w, h) ++static int loadBMP16(fp, pic24, w, h, mask) ++ FILE *fp; ++ byte *pic24; ++ u_int w, h, *mask; ++{ ++ int x, y; ++ byte *pp = pic24 + ((h - 1) * w * 3); ++ size_t l = w*h*3; ++ u_int buf, colormask[6]; ++ int i, bit, bitshift[6], colorbits[6], bitshift2[6]; ++ ++ if (mask == NULL) { /* RGB555 */ ++ colormask[0] = 0x00007c00; ++ colormask[1] = 0x000003e0; ++ colormask[2] = 0x0000001f; ++ colormask[3] = 0x7c000000; ++ colormask[4] = 0x03e00000; ++ colormask[5] = 0x001f0000; ++ bitshift[0] = 7; bitshift2[0] = 0; ++ bitshift[1] = 2; bitshift2[1] = 0; ++ bitshift[2] = 0; bitshift2[2] = 3; ++ bitshift[3] = 23; bitshift2[3] = 0; ++ bitshift[4] = 18; bitshift2[4] = 0; ++ bitshift[5] = 13; bitshift2[5] = 0; ++ } else { ++ colormask[0] = mask[0]; ++ colormask[1] = mask[1]; ++ colormask[2] = mask[2]; ++ colormask[3] = (mask[0] & 0xffff) << 16; ++ colormask[4] = (mask[1] & 0xffff) << 16; ++ colormask[5] = (mask[2] & 0xffff) << 16; ++ ++ for (i = 0; i < 3; ++i) { ++ buf = colormask[i]; ++ ++ bitshift[i] = 0; ++ for (bit = 0; bit < 32; ++bit) { ++ if (buf & 1) ++ break; ++ else ++ ++bitshift[i]; ++ buf >>= 1; ++ } ++ bitshift[i+3] = bitshift[i] + 16; ++ ++ colorbits[i] = 0; ++ for (; bit < 32; ++bit) { ++ if (buf & 1) ++ ++colorbits[i]; ++ else ++ break; ++ buf >>= 1; ++ } ++ if (colorbits[i] > 8) { /* over 8-bit depth */ ++ bitshift[i] += (colorbits[i] - 8); ++ bitshift[i+3] = bitshift[i] + 16; ++ bitshift2[i] = bitshift2[i+3] = 0; ++ } else ++ bitshift2[i] = bitshift2[i+3] = 8 - colorbits[i]; ++ } ++ } ++ ++ if (DEBUG > 1) ++ fprintf(stderr, "loadBMP16: bitfields\n" ++ "\tR: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" ++ "\t (mask = %08x, shift >>%2d, <<%2d)\n" ++ "\tG: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" ++ "\t (mask = %08x, shift >>%2d, <<%2d)\n" ++ "\tB: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" ++ "\t (mask = %08x, shift >>%2d, <<%2d)\n", ++ colorbits[0], colormask[0], bitshift[0], bitshift2[0], ++ colormask[3], bitshift[3], bitshift2[3], ++ colorbits[1], colormask[1], bitshift[1], bitshift2[1], ++ colormask[4], bitshift[4], bitshift2[4], ++ colorbits[2], colormask[2], bitshift[2], bitshift2[2], ++ colormask[5], bitshift[5], bitshift2[5]); ++ ++ for (y = h-1; y >= 0 && (pp - pic24 <= l); y--) { ++ pp = pic24 + (3 * w * y); ++ if ((y&0x3f)==0) WaitCursor(); ++ ++ for (x = w; x > 1; x -= 2) { ++ buf = getint(fp); ++ *(pp++) = (buf & colormask[0]) >> bitshift[0] << bitshift2[0]; ++ *(pp++) = (buf & colormask[1]) >> bitshift[1] << bitshift2[1]; ++ *(pp++) = (buf & colormask[2]) >> bitshift[2] << bitshift2[2]; ++ *(pp++) = (buf & colormask[3]) >> bitshift[3] << bitshift2[3]; ++ *(pp++) = (buf & colormask[4]) >> bitshift[4] << bitshift2[4]; ++ *(pp++) = (buf & colormask[5]) >> bitshift[5] << bitshift2[5]; ++ } ++ if (w & 1) { /* padded to 2 pix */ ++ buf = getint(fp); ++ *(pp++) = (buf & colormask[0]) >> bitshift[0]; ++ *(pp++) = (buf & colormask[1]) >> bitshift[1]; ++ *(pp++) = (buf & colormask[2]) >> bitshift[2]; ++ } ++ } ++ ++ return FERROR(fp)? 1 : 0; ++} ++ ++ ++ ++/*******************************************/ ++static int loadBMP24(fp, pic24, w, h, bits) /* also handles 32-bit BI_RGB */ + FILE *fp; + byte *pic24; +- u_int w,h; ++ u_int w,h, bits; + { + int i,j,padb,rv; +- byte *pp; ++ byte *pp = pic24 + ((h - 1) * w * 3); ++ size_t l = w*h*3; + + rv = 0; + + padb = (4 - ((w*3) % 4)) & 0x03; /* # of pad bytes to read at EOscanline */ ++ if (bits==32) padb = 0; + for (i=h-1; i>=0; i--) { pp = pic24 + (i * w * 3); if ((i&0x3f)==0) WaitCursor(); - +- for (j=0; j<w; j++) { + - for (j=0; j<w; j++) { ++ for (j=0; j<w && (pp - pic24 <= l); j++) { pp[2] = getc(fp); /* blue */ pp[1] = getc(fp); /* green */ -@@ -484,30 +502,30 @@ + pp[0] = getc(fp); /* red */ ++ if (bits==32) getc(fp); + pp += 3; + } + +@@ -484,30 +671,94 @@ } return rv; -} +} ++ ++ ++ ++/*******************************************/ ++static int loadBMP32(fp, pic24, w, h, colormask) /* 32-bit BI_BITFIELDS only */ ++ FILE *fp; ++ byte *pic24; ++ u_int w, h, *colormask; ++{ ++ int x, y; ++ byte *pp; ++ u_int buf; ++ int i, bit, bitshift[3], colorbits[3], bitshift2[3]; ++ ++ for (i = 0; i < 3; ++i) { ++ buf = colormask[i]; ++ ++ bitshift[i] = 0; ++ for (bit = 0; bit < 32; ++bit) { ++ if (buf & 1) ++ break; ++ else ++ ++bitshift[i]; ++ buf >>= 1; ++ } ++ ++ colorbits[i] = 0; ++ for (; bit < 32; ++bit) { ++ if (buf & 1) ++ ++colorbits[i]; ++ else ++ break; ++ buf >>= 1; ++ } ++ if (colorbits[i] > 8) { /* over 8-bit depth */ ++ bitshift[i] += (colorbits[i] - 8); ++ bitshift2[i] = 0; ++ } else ++ bitshift2[i] = 8 - colorbits[i]; ++ } ++ ++ if (DEBUG > 1) ++ fprintf(stderr, "loadBMP32: bitfields\n" ++ "\tR: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" ++ "\tG: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n" ++ "\tB: bits = %2d, mask = %08x, shift >>%2d, <<%2d\n", ++ colorbits[0], colormask[0], bitshift[0], bitshift2[0], ++ colorbits[1], colormask[1], bitshift[1], bitshift2[1], ++ colorbits[2], colormask[2], bitshift[2], bitshift2[2]); ++ ++ for (y = h-1; y >= 0; y--) { ++ pp = pic24 + (3 * w * y); ++ if ((y&0x3f)==0) WaitCursor(); ++ ++ for(x = w; x > 0; x --) { ++ buf = getint(fp); ++ *(pp++) = (buf & colormask[0]) >> bitshift[0] << bitshift2[0]; ++ *(pp++) = (buf & colormask[1]) >> bitshift[1] << bitshift2[1]; ++ *(pp++) = (buf & colormask[2]) >> bitshift[2] << bitshift2[2]; ++ } ++ } ++ ++ return FERROR(fp)? 1 : 0; ++} @@ -6644,13 +11152,13 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c - (((unsigned int) c2) << 16) + - (((unsigned int) c3) << 24); + return ((u_int) c) + -+ (((u_int) c1) << 8) + ++ (((u_int) c1) << 8) + + (((u_int) c2) << 16) + + (((u_int) c3) << 24); } -@@ -518,7 +536,7 @@ +@@ -518,7 +769,7 @@ { int c, c1; @@ -6659,7 +11167,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c putc(c, fp); putc(c1,fp); } -@@ -529,10 +547,10 @@ +@@ -529,10 +780,10 @@ int i; { int c, c1, c2, c3; @@ -6674,7 +11182,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c putc(c, fp); putc(c1,fp); putc(c2,fp); putc(c3,fp); } -@@ -562,11 +580,11 @@ +@@ -562,11 +813,11 @@ * 8-bit image * note that PIC24 and F_BWDITHER/F_REDUCED won't happen * @@ -6688,7 +11196,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c byte *graypic, *sp, *dp, graymap[256]; nc = nbits = cmaplen = 0; -@@ -576,10 +594,16 @@ +@@ -576,10 +827,16 @@ /* generate a faked 8-bit per pixel image with a grayscale cmap, so that it can just fall through existing 8-bit code */ @@ -6707,7 +11215,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c *dp = MONO(sp[0],sp[1],sp[2]); } -@@ -611,7 +635,7 @@ +@@ -611,7 +868,7 @@ for (i=0; i<numcols; i++) { /* see if color #i is a duplicate */ for (j=0; j<i; j++) { @@ -6716,7 +11224,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c bmap[i] == bmap[j]) break; } -@@ -689,13 +713,13 @@ +@@ -689,13 +946,13 @@ #else if (!FERROR(fp)) return -1; #endif @@ -6733,7 +11241,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c /*******************************************/ static void writeBMP1(fp, pic8, w, h) FILE *fp; -@@ -708,7 +732,7 @@ +@@ -708,7 +965,7 @@ padw = ((w + 31)/32) * 32; /* 'w', padded to be a multiple of 32 */ for (i=h-1; i>=0; i--) { @@ -6742,7 +11250,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c if ((i&0x3f)==0) WaitCursor(); for (j=bitnum=c=0; j<=padw; j++,bitnum++) { -@@ -716,7 +740,7 @@ +@@ -716,7 +973,7 @@ putc(c,fp); bitnum = c = 0; } @@ -6751,7 +11259,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c c <<= 1; if (j<w) { -@@ -724,7 +748,7 @@ +@@ -724,7 +981,7 @@ } } } @@ -6760,7 +11268,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c -@@ -758,7 +782,7 @@ +@@ -758,7 +1015,7 @@ } } } @@ -6769,7 +11277,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c -@@ -768,7 +792,7 @@ +@@ -768,7 +1025,7 @@ byte *pic8; int w,h; { @@ -6778,7 +11286,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c byte *pp; padw = ((w + 3)/4) * 4; /* 'w' padded to a multiple of 4pix (32 bits) */ -@@ -780,7 +804,7 @@ +@@ -780,7 +1037,7 @@ for (j=0; j<w; j++) putc(pc2nc[*pp++], fp); for ( ; j<padw; j++) putc(0, fp); } @@ -6787,7 +11295,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c /*******************************************/ -@@ -789,7 +813,7 @@ +@@ -789,7 +1046,7 @@ byte *pic24; int w,h; { @@ -6796,7 +11304,7 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c byte *pp; padb = (4 - ((w*3) % 4)) & 0x03; /* # of pad bytes to write at EOscanline */ -@@ -807,7 +831,7 @@ +@@ -807,7 +1064,7 @@ for (j=0; j<padb; j++) putc(0, fp); } @@ -6805,9 +11313,18 @@ diff -ruN xv-3.10a/xvbmp.c xv-3.10a-bugfixes/xvbmp.c -diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c +@@ -816,7 +1073,7 @@ + + /*******************************************/ + static int bmpError(fname, st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; +diff -ru xv-3.10a/xvbrowse.c xv-3.10a-enhancements/xvbrowse.c --- xv-3.10a/xvbrowse.c 1995-01-19 09:49:17.000000000 -0800 -+++ xv-3.10a-bugfixes/xvbrowse.c 2004-05-16 18:01:25.000000000 -0700 ++++ xv-3.10a-enhancements/xvbrowse.c 2007-05-13 17:50:18.000000000 -0700 @@ -1,6 +1,6 @@ /* * xvbrowse.c - visual schnauzer routines @@ -6816,43 +11333,326 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c * includes: * void CreateBrowse(char *, char *, char *, char *, char *); * void OpenBrowse(); -@@ -34,7 +34,7 @@ +@@ -19,11 +19,16 @@ + + #define NEEDSDIR + #include "xv.h" ++#include <unistd.h> /* access() */ + + #if defined(VMS) || defined(isc) + typedef unsigned int mode_t; /* file mode bits */ + #endif + ++#ifndef MAX ++# define MAX(a,b) (((a)>(b))?(a):(b)) /* used only for wheelmouse support */ ++#endif ++ + + /* load up built-in icons */ + #include "bits/br_file" +@@ -34,27 +39,40 @@ #include "bits/br_sock" #include "bits/br_fifo" #include "bits/br_error" -#include "bits/br_unknown" +/* #include "bits/br_unknown" commented out (near line 492) */ ++ #include "bits/br_cmpres" - - #include "bits/br_gif" -@@ -97,7 +97,7 @@ - #define BF_MAX 28 /* # of built-in icons */ ++#include "bits/br_bzip2" + +-#include "bits/br_gif" +-#include "bits/br_pm" +-#include "bits/br_pbm" +-#include "bits/br_xbm" +-#include "bits/br_sunras" + #include "bits/br_bmp" +-#include "bits/br_utah" ++#include "bits/br_fits" ++#include "bits/br_gif" ++#include "bits/br_iff" + #include "bits/br_iris" +-#include "bits/br_pcx" + #include "bits/br_jfif" +-#include "bits/br_tiff" ++#include "bits/br_jp2" ++#include "bits/br_jpc" ++#include "bits/br_mag" ++#include "bits/br_maki" ++#include "bits/br_mgcsfx" ++#include "bits/br_pbm" ++#include "bits/br_pcd" ++#include "bits/br_pcx" + #include "bits/br_pds" ++#include "bits/br_pi" ++#include "bits/br_pic" ++#include "bits/br_pic2" ++#include "bits/br_pm" ++#include "bits/br_png" + #include "bits/br_ps" +-#include "bits/br_iff" ++#include "bits/br_sunras" + #include "bits/br_targa" ++#include "bits/br_tiff" ++#include "bits/br_utah" ++#include "bits/br_xbm" + #include "bits/br_xpm" + #include "bits/br_xwd" +-#include "bits/br_fits" ++#include "bits/br_zx" /* [JCE] The Spectrum+3 icon */ + + #include "bits/br_trash" + #include "bits/fcurs" +@@ -90,17 +108,28 @@ + #define BF_COMPRESS 21 + #define BF_PS 22 + #define BF_IFF 23 +-#define BF_TARGA 24 ++#define BF_TGA 24 + #define BF_XPM 25 + #define BF_XWD 26 + #define BF_FITS 27 +-#define BF_MAX 28 /* # of built-in icons */ ++#define BF_PNG 28 ++#define BF_ZX 29 /* [JCE] Spectrum SCREEN$ */ ++#define BF_PCD 30 ++#define BF_BZIP2 31 ++#define BF_JP2 32 ++#define BF_JPC 33 ++#define JP_EXT_BF (BF_JPC) ++#define BF_MAG (JP_EXT_BF + 1) ++#define BF_MAKI (JP_EXT_BF + 2) ++#define BF_PIC (JP_EXT_BF + 3) ++#define BF_PI (JP_EXT_BF + 4) ++#define BF_PIC2 (JP_EXT_BF + 5) ++#define BF_MGCSFX (JP_EXT_BF + 6) ++#define JP_EXT_BF_END (BF_MGCSFX) ++#define BF_MAX (JP_EXT_BF_END + 1) /* # of built-in icons */ #define ISLOADABLE(ftyp) (ftyp!=BF_DIR && ftyp!=BF_CHR && ftyp!=BF_BLK && \ - ftyp!=BF_SOCK && ftyp!=BF_FIFO) +- +-#define DEF_BROWWIDE 615 /* default size of window */ +-#define DEF_BROWHIGH 356 + ftyp!=BF_SOCK && ftyp!=BF_FIFO) - #define DEF_BROWWIDE 615 /* default size of window */ - #define DEF_BROWHIGH 356 -@@ -150,12 +150,12 @@ - static char *hideHstr = "Hide 'hidden' files"; + #define SCROLLVERT 8 /* height of scroll region at top/bottom of iconw */ + #define PAGEVERT 40 /* during rect drag, if further than this, page */ +@@ -113,59 +142,93 @@ + #define BOTMARGIN 58 /* room for a row of buttons and a line of text */ + #define LRMARGINS 5 /* left and right margins */ + +-#define ISIZE_WIDE 80 /* maximum size of an icon */ +-#define ISIZE_HIGH 60 ++/* some people like bigger icons; 4:3 aspect ratio is recommended ++ * (NOTE: standard XV binaries will not be able to read larger icons!) */ ++#ifndef ISIZE_WIDE ++# define ISIZE_WIDE 80 /* maximum size of an icon */ ++#endif ++#ifndef ISIZE_HIGH ++# define ISIZE_HIGH 60 ++#endif ++ ++#ifndef ISIZE_WPAD ++# define ISIZE_WPAD 16 /* extra horizontal padding between icons */ ++#endif ++ ++#ifndef INUM_WIDE ++# define INUM_WIDE 6 /* size initial window to hold this many icons */ ++#endif ++#ifndef INUM_HIGH ++# define INUM_HIGH 3 ++#endif + +-#define ISPACE_WIDE (ISIZE_WIDE+16) /* icon spacing */ ++#define ISPACE_WIDE (ISIZE_WIDE+ISIZE_WPAD) /* icon spacing */ + #define ISPACE_TOP 4 /* dist btwn top of ISPACE and ISIZE */ + #define ISPACE_TTOP 4 /* dist btwn bot of icon and title */ + #define ISPACE_HIGH (ISIZE_HIGH+ISPACE_TOP+ISPACE_TTOP+16+4) + + #define DBLCLICKTIME 300 /* milliseconds */ + +-/* button/menu indicies */ +-#define BR_CHDIR 0 +-#define BR_DELETE 1 +-#define BR_MKDIR 2 +-#define BR_RENAME 3 +-#define BR_RESCAN 4 +-#define BR_UPDATE 5 +-#define BR_NEWWIN 6 +-#define BR_GENICON 7 +-#define BR_SELALL 8 +-#define BR_TEXTVIEW 9 +-#define BR_RECURSUP 10 +-#define BR_QUIT 11 +-#define BR_CLOSE 12 +-#define BR_NBUTTS 13 /* # of command buttons */ +-#define BR_SEP1 13 /* separator */ +-#define BR_HIDDEN 14 +-#define BR_SELFILES 15 +-#define BR_NCMDS 16 /* # of menu commands */ ++#define COUNT(x) (sizeof (x) / sizeof (x)[0]) ++ ++/* button/menu indices */ ++#define BR_CHDIR 0 ++#define BR_DELETE 1 ++#define BR_MKDIR 2 ++#define BR_RENAME 3 ++#define BR_RESCAN 4 ++#define BR_UPDATE 5 ++#define BR_NEWWIN 6 ++#define BR_GENICON 7 ++#define BR_SELALL 8 ++#define BR_TEXTVIEW 9 ++#define BR_RECURSUP 10 ++#define BR_QUIT 11 ++#define BR_CLOSE 12 ++#define BR_NBUTTS 13 /* # of command buttons */ ++#define BR_SEP1 13 /* separator */ ++#define BR_HIDDEN 14 ++#define BR_SELFILES 15 ++#define BR_CLIPBRD 16 ++#ifdef AUTO_EXPAND ++# define BR_CLEARVD 17 ++# define BR_NCMDS 18 /* # of menu commands */ ++#else ++# define BR_NCMDS 17 /* # of menu commands */ ++#endif - static char *cmdMList[] = { "Change directory...\t^c", + #define BUTTW 80 + #define BUTTH 24 + +-static char *showHstr = "Show hidden files"; +-static char *hideHstr = "Hide 'hidden' files"; +- +-static char *cmdMList[] = { "Change directory...\t^c", - "Delete file(s)\t^d", - "New directory...\t^n", - "Rename file...\t^r", -+ "Delete file(s)\t^d", -+ "New directory...\t^n", -+ "Rename file...\t^r", - "Rescan directory\t^s", +- "Rescan directory\t^s", - "Update icons\t^u", - "Open new window\t^w", -+ "Update icons\t^u", -+ "Open new window\t^w", - "Generate icon(s)\t^g", - "Select all files\t^a", - "Text view\t^t", -@@ -260,7 +260,7 @@ +- "Generate icon(s)\t^g", +- "Select all files\t^a", +- "Text view\t^t", +- "Recursive Update\t^e", +- "Quit xv\t^q", +- "Close window\t^c", +- MBSEP, +- "Show hidden files", /* no equiv */ +- "Select files...\t^f" +- }; ++/* original size of window was 615 x 356 (for 80x60 thumbnails in 6x3 array) */ ++#define DEF_BROWWIDE (ISPACE_WIDE * INUM_WIDE + LRMARGINS * 2 + 29) ++#define DEF_BROWHIGH (ISPACE_HIGH * INUM_HIGH + BUTTH * 2 + 16 + 28) ++/* last number is a fudge--e.g., extra spaces, borders, etc. -----^ */ ++ ++static const char *showHstr = "Show hidden files"; ++static const char *hideHstr = "Hide 'hidden' files"; ++ ++static const char *cmdMList[] = { "Change directory...\t^c", ++ "Delete file(s)\t^d", ++ "New directory...\t^n", ++ "Rename file...\t^r", ++ "Rescan directory\t^s", ++ "Update icons\t^u", ++ "Open new window\t^w", ++ "Generate icon(s)\t^g", ++ "Select all files\t^a", ++ "Text view\t^t", ++ "Recursive Update\t^e", ++ "Quit xv\t^q", ++ "Close window\t^c", ++ MBSEP, ++ "Show hidden files", /* no equiv */ ++ "Select files...\t^f", ++ "Clipboard\t^x" ++#ifdef AUTO_EXPAND ++ , "Clear virtual directory" ++#endif ++ }; + + + #define MAXDEEP 30 /* maximum directory depth */ +@@ -183,32 +246,43 @@ + } BFIL; + + /* data needed per schnauzer window */ +-typedef struct { Window win, iconW; +- int vis, wasvis; ++typedef struct { Window win, iconW; ++ int vis, wasvis; + +- int wide, high; +- int iwWide, iwHigh; +- int numWide, numHigh, visHigh; +- +- SCRL scrl; +- BUTT but[BR_NBUTTS]; +- MBUTT dirMB, cmdMB; +- char dispstr[256]; +- int numbutshown; +- int showhidden; +- +- int numlit; +- BFIL *bfList; +- int bfLen; +- int lastIconClicked; ++ int wide, high; ++ int iwWide, iwHigh; ++ int numWide, numHigh, visHigh; ++ ++ SCRL scrl; ++ BUTT but[BR_NBUTTS]; ++ MBUTT dirMB, cmdMB; ++ char dispstr[256]; ++ int numbutshown; ++ int showhidden; ++ ++ int numlit; ++ BFIL *bfList; ++ int bfLen; ++ int lastIconClicked; + unsigned long lastClickTime; + +- int ndirs; +- char *mblist[MAXDEEP]; +- char path[MAXPATHLEN+2]; /* '/' terminated */ ++ int ndirs; ++ const char *mblist[MAXDEEP]; ++ char path[MAXPATHLEN+2]; /* '/' terminated */ ++ ++ char *str; ++ int siz, len; ++ time_t lst; + } BROWINFO; + + ++/* keep track of last icon visible in each path */ ++typedef struct IVIS IVIS; ++ struct IVIS { IVIS *next; ++ char *name; ++ int icon; ++ }; ++ + static Cursor movecurs, copycurs, delcurs; + static BROWINFO binfo[MAXBRWIN]; + static Pixmap bfIcons[BF_MAX], trashPix; +@@ -220,7 +294,7 @@ + static void closeBrowse PARM((BROWINFO *)); + static int brChkEvent PARM((BROWINFO *, XEvent *)); + static void resizeBrowse PARM((BROWINFO *, int, int)); +-static void setBrowStr PARM((BROWINFO *, char *)); ++static void setBrowStr PARM((BROWINFO *, const char *)); + static void doCmd PARM((BROWINFO *, int)); + static void drawBrow PARM((BROWINFO *)); + static void drawNumfiles PARM((BROWINFO *)); +@@ -255,12 +329,12 @@ + static void rescanDir PARM((BROWINFO *)); + static int namcmp PARM((const void *, const void *)); + static void freeBfList PARM((BROWINFO *br)); +-static char **getDirEntries PARM((char *, int *, int)); ++static char **getDirEntries PARM((const char *, int *, int)); + static void computeScrlVals PARM((BROWINFO *, int *, int *)); static void genSelectedIcons PARM((BROWINFO *)); static void genIcon PARM((BROWINFO *, BFIL *)); static void loadThumbFile PARM((BROWINFO *, BFIL *)); @@ -6861,16 +11661,52 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c int, char *)); static void makeThumbDir PARM((BROWINFO *)); -@@ -284,7 +284,7 @@ +@@ -278,14 +352,14 @@ + static void doSelFilesCmd PARM((BROWINFO *)); + + static void doRecurseCmd PARM((BROWINFO *)); +-static void recurseUpdate PARM((BROWINFO *, char *)); ++static void recurseUpdate PARM((BROWINFO *, const char *)); + + static void rm_file PARM((BROWINFO *, char *)); static void rm_dir PARM((BROWINFO *, char *)); static void rm_dir1 PARM((BROWINFO *)); -static void dragFiles PARM((BROWINFO *, BROWINFO *, char *, char *, +- char *, char **, int, int)); +static void dragFiles PARM((BROWINFO *, BROWINFO *, char *, char *, - char *, char **, int, int)); ++ const char *, char **, int, int)); static int moveFile PARM((char *, char *)); static int copyFile PARM((char *, char *)); -@@ -369,8 +369,8 @@ + static void cp PARM((void)); +@@ -294,16 +368,25 @@ + static void cp_special PARM((struct stat *, int)); + static void cp_fifo PARM((struct stat *, int)); + ++#ifdef AUTO_EXPAND ++static int stat2bf PARM((u_int, char *)); ++#else + static int stat2bf PARM((u_int)); ++#endif + + static int selmatch PARM((char *, char *)); + static int selmatch1 PARM((char *, char *)); ++static void recIconVisible PARM((char *, int)); ++static void restIconVisible PARM((BROWINFO *)); ++ ++static void clipChanges PARM((BROWINFO *)); + + + + /***************************************************************/ + void CreateBrowse(geom, fgstr, bgstr, histr, lostr) +- char *geom, *fgstr, *bgstr, *histr, *lostr; ++ const char *geom; ++ const char *fgstr, *bgstr, *histr, *lostr; + { + int i; + XSizeHints hints; +@@ -369,8 +452,8 @@ if (gset & YNegative) gy1 = gy - i * 20; else gy1 = gy + i * 20; @@ -6881,7 +11717,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (gset & XNegative) ? "-" : "+", abs(gx1), (gset & YNegative) ? "-" : "+", abs(gy1)); else -@@ -402,11 +402,11 @@ +@@ -402,11 +485,11 @@ /* note: everything is sized and positioned in ResizeBrowse() */ @@ -6895,7 +11731,22 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c browfg, browbg, browhi, browlo, drawIconWin); -@@ -486,7 +486,7 @@ +@@ -448,10 +531,12 @@ + "Text view",browfg,browbg,browhi,browlo); + BTCreate(&(br->but[BR_RECURSUP]), br->win, 0,0,BUTTW,BUTTH, + "RecursUpd",browfg,browbg,browhi,browlo); +- BTCreate(&(br->but[BR_QUIT]), br->win, 0,0,BUTTW,BUTTH, ++ BTCreate(&(br->but[BR_QUIT]), br->win, 0,0,BUTTW,BUTTH, + "Quit xv",browfg,browbg,browhi,browlo); +- BTCreate(&(br->but[BR_CLOSE]), br->win, 0,0,BUTTW,BUTTH, ++ BTCreate(&(br->but[BR_CLOSE]), br->win, 0,0,BUTTW,BUTTH, + "Close",browfg,browbg,browhi,browlo); ++ BTCreate(&(br->but[BR_CLIPBRD]), br->win, 0,0,BUTTW,BUTTH, ++ "Clipboard",browfg,browbg,browhi,browlo); + + XMapSubwindows(theDisp, br->win); + +@@ -486,55 +571,62 @@ bfIcons[BF_SOCK]=MakePix1(br->win,br_sock_bits,br_sock_width,br_sock_height); bfIcons[BF_FIFO]=MakePix1(br->win,br_fifo_bits,br_fifo_width,br_fifo_height); @@ -6904,19 +11755,72 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c br_error_width, br_error_height); /* bfIcons[BF_UNKNOWN] = MakePix1(br->win, br_unknown_bits, -@@ -501,9 +501,9 @@ + br_unknown_width, br_unknown_height); */ +- + bfIcons[BF_UNKNOWN] = bfIcons[BF_FILE]; - bfIcons[BF_SUNRAS] = MakePix1(br->win, br_sunras_bits, - br_sunras_width, br_sunras_height); +- bfIcons[BF_GIF] =MakePix1(br->win,br_gif_bits, br_gif_width, br_gif_height); +- bfIcons[BF_PM] =MakePix1(br->win,br_pm_bits, br_pm_width, br_pm_height); +- bfIcons[BF_PBM] =MakePix1(br->win,br_pbm_bits, br_pbm_width, br_pbm_height); +- bfIcons[BF_XBM] =MakePix1(br->win,br_xbm_bits, br_xbm_width, br_xbm_height); +- +- bfIcons[BF_SUNRAS] = MakePix1(br->win, br_sunras_bits, +- br_sunras_width, br_sunras_height); - bfIcons[BF_BMP] = MakePix1(br->win,br_bmp_bits, -+ bfIcons[BF_BMP] = MakePix1(br->win,br_bmp_bits, - br_bmp_width, br_bmp_height); +- br_bmp_width, br_bmp_height); - bfIcons[BF_UTAHRLE] = MakePix1(br->win, br_utahrle_bits, +- br_utahrle_width, br_utahrle_height); ++ bfIcons[BF_COMPRESS] = MakePix1(br->win, br_cmpres_bits, ++ br_cmpres_width, br_cmpres_height); ++ bfIcons[BF_BZIP2] = MakePix1(br->win, br_bzip2_bits, ++ br_bzip2_width, br_bzip2_height); + ++ bfIcons[BF_BMP] =MakePix1(br->win,br_bmp_bits, br_bmp_width, br_bmp_height); ++ bfIcons[BF_FITS]=MakePix1(br->win,br_fits_bits,br_fits_width,br_fits_height); ++ bfIcons[BF_GIF] =MakePix1(br->win,br_gif_bits, br_gif_width, br_gif_height); ++ bfIcons[BF_IFF] =MakePix1(br->win,br_iff_bits, br_iff_width, br_iff_height); + bfIcons[BF_IRIS]=MakePix1(br->win,br_iris_bits,br_iris_width,br_iris_height); +- bfIcons[BF_PCX] =MakePix1(br->win,br_pcx_bits, br_pcx_width, br_pcx_height); + bfIcons[BF_JFIF]=MakePix1(br->win,br_jfif_bits,br_jfif_width,br_jfif_height); +- bfIcons[BF_TIFF]=MakePix1(br->win,br_tiff_bits,br_tiff_width,br_tiff_height); ++ bfIcons[BF_JP2] =MakePix1(br->win,br_jp2_bits, br_jp2_width, br_jp2_height); ++ bfIcons[BF_JPC] =MakePix1(br->win,br_jpc_bits, br_jpc_width, br_jpc_height); ++ bfIcons[BF_MAG] =MakePix1(br->win,br_mag_bits, br_mag_width, br_mag_height); ++ bfIcons[BF_MAKI]=MakePix1(br->win,br_maki_bits,br_maki_width,br_maki_height); ++ bfIcons[BF_PBM] =MakePix1(br->win,br_pbm_bits, br_pbm_width, br_pbm_height); ++ bfIcons[BF_PCD] =MakePix1(br->win,br_pcd_bits, br_pcd_width, br_pcd_height); ++ bfIcons[BF_PCX] =MakePix1(br->win,br_pcx_bits, br_pcx_width, br_pcx_height); + bfIcons[BF_PDS] =MakePix1(br->win,br_pds_bits, br_pds_width, br_pds_height); +- +- bfIcons[BF_COMPRESS]= MakePix1(br->win, br_cmpres_bits, +- br_cmpres_width, br_cmpres_height); +- ++ bfIcons[BF_PIC2]=MakePix1(br->win,br_pic2_bits,br_pic2_width,br_pic2_height); ++ bfIcons[BF_PIC] =MakePix1(br->win,br_pic_bits, br_pic_width, br_pic_height); ++ bfIcons[BF_PI] =MakePix1(br->win,br_pi_bits, br_pi_width, br_pi_height); ++ bfIcons[BF_PM] =MakePix1(br->win,br_pm_bits, br_pm_width, br_pm_height); ++ bfIcons[BF_PNG] =MakePix1(br->win,br_png_bits, br_png_width, br_png_height); + bfIcons[BF_PS] =MakePix1(br->win,br_ps_bits, br_ps_width, br_ps_height); +- bfIcons[BF_IFF] =MakePix1(br->win,br_iff_bits, br_iff_width, br_iff_height); +- +- bfIcons[BF_TARGA] = MakePix1(br->win, br_targa_bits, +- br_targa_width, br_targa_height); +- ++ bfIcons[BF_TGA] =MakePix1(br->win,br_tga_bits, br_tga_width, br_tga_height); ++ bfIcons[BF_TIFF]=MakePix1(br->win,br_tiff_bits,br_tiff_width,br_tiff_height); ++ bfIcons[BF_XBM] =MakePix1(br->win,br_xbm_bits, br_xbm_width, br_xbm_height); + bfIcons[BF_XPM] =MakePix1(br->win,br_xpm_bits, br_xpm_width, br_xpm_height); + bfIcons[BF_XWD] =MakePix1(br->win,br_xwd_bits, br_xwd_width, br_xwd_height); +- bfIcons[BF_FITS]=MakePix1(br->win,br_fits_bits,br_fits_width,br_fits_height); ++ bfIcons[BF_ZX] =MakePix1(br->win,br_zx_bits, br_zx_width, br_zx_height); ++ ++ bfIcons[BF_SUNRAS] = MakePix1(br->win, br_sunras_bits, ++ br_sunras_width, br_sunras_height); + bfIcons[BF_UTAHRLE] = MakePix1(br->win, br_utahrle_bits, - br_utahrle_width, br_utahrle_height); ++ br_utahrle_width, br_utahrle_height); ++ bfIcons[BF_MGCSFX] = MakePix1(br->win, br_mgcsfx_bits, ++ br_mgcsfx_width, br_mgcsfx_height); - bfIcons[BF_IRIS]=MakePix1(br->win,br_iris_bits,br_iris_width,br_iris_height); -@@ -528,13 +528,13 @@ /* check that they all got built */ for (i=0; i<BF_MAX && bfIcons[i]; i++); @@ -6932,7 +11836,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c KeyPressMask | StructureNotifyMask); } -@@ -557,7 +557,7 @@ +@@ -557,7 +649,7 @@ movecurs = XCreatePixmapCursor(theDisp,mcpix,fcmpix,&cursfg,&cursbg,13,13); copycurs = XCreatePixmapCursor(theDisp,ccpix,fcmpix,&cursfg,&cursbg,13,13); delcurs = XCreatePixmapCursor(theDisp,dcpix,fcmpix,&cursbg,&cursfg,13,13); @@ -6941,7 +11845,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c FatalError("unable to create schnauzer cursors..."); } else FatalError("unable to create schnauzer cursors..."); -@@ -566,7 +566,7 @@ +@@ -566,7 +658,7 @@ XFreePixmap(theDisp, ccpix); XFreePixmap(theDisp, dcpix); XFreePixmap(theDisp, fcmpix); @@ -6950,7 +11854,20 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c hasBeenSized = 1; /* we can now start looking at browse events */ } -@@ -586,11 +586,11 @@ +@@ -576,9 +668,10 @@ + void OpenBrowse() + { + /* opens up a single browser window */ +- int i; ++ ++ int i; + BROWINFO *br; +- char path[MAXPATHLEN+1]; ++ char path[MAXPATHLEN+1]; + + /* find next browser to be opened */ + for (i=0; i<MAXBRWIN; i++) { +@@ -586,11 +679,11 @@ if (!br->vis) break; } if (i==MAXBRWIN) return; /* full up: shouldn't happen */ @@ -6964,7 +11881,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c freeBfList(br); /* see if some browser is pointing to the same path as CWD. If so, -@@ -645,7 +645,7 @@ +@@ -645,7 +738,7 @@ /* free all info for this browse window */ freeBfList(br); sprintf(br->path, BOGUSPATH); @@ -6973,17 +11890,68 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* turn on 'open new window' command doodads */ windowMB.dim[WMB_BROWSE] = 0; for (i=0; i<MAXBRWIN; i++) { -@@ -739,8 +739,7 @@ +@@ -698,6 +791,9 @@ + } + } + ++#ifdef VS_RESCMAP ++static int _IfTempOut=0; ++#endif + + /***************************************************************/ + void KillBrowseWindows() +@@ -730,7 +826,6 @@ + return 0; + } + +- + /***************************************************************/ + static int brChkEvent(br, xev) + BROWINFO *br; +@@ -739,22 +834,36 @@ /* checks event to see if it's a browse-window related thing. If it is, it eats the event and returns '1', otherwise '0'. */ - int i, rv; - char buf[1024]; -+ int rv; +- +- rv = 1; ++ int rv = 1; - rv = 1; + if (!hasBeenSized) return 0; /* ignore evrythng until we get 1st Resize */ + ++ ++#ifdef VS_RESCMAP ++ /* force change color map if have LocalCmap */ ++ if (browPerfect && browCmap && (_IfTempOut==2)) { ++ int i; ++ XSetWindowAttributes xswa; ++ ++ xswa.colormap = LocalCmap? LocalCmap : theCmap; ++ for (i=0; i<MAXBRWIN; ++i) ++ XChangeWindowAttributes(theDisp, binfo[i].win, CWColormap, &xswa); ++ XFlush(theDisp); ++ _IfTempOut=1; ++ } ++#endif ++ + if (xev->type == Expose) { + int x,y,w,h; + XExposeEvent *e = (XExposeEvent *) xev; + x = e->x; y = e->y; w = e->width; h = e->height; -@@ -788,7 +787,7 @@ + /* throw away excess redraws for 'dumb' windows */ +- if (e->count > 0 && (e->window == br->scrl.win)) {} ++ if (e->count > 0 && (e->window == br->scrl.win)) ++ ; + +- else if (e->window == br->scrl.win) SCRedraw(&(br->scrl)); ++ else if (e->window == br->scrl.win) ++ SCRedraw(&(br->scrl)); + + else if (e->window == br->win || e->window == br->iconW) { /* smart wins */ + /* group individual expose rects into a single expose region */ +@@ -788,7 +897,7 @@ fprintf(stderr,"grouped %d expose events into %d,%d %dx%d rect\n", count, rect.x, rect.y, rect.width, rect.height); } @@ -6992,16 +11960,65 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (e->window == br->win) drawBrow(br); else if (e->window == br->iconW) -@@ -811,7 +810,7 @@ +@@ -807,13 +916,55 @@ + int i,x,y; + x = e->x; y = e->y; + ++#ifdef VS_RESCMAP ++ if (browCmap && browPerfect && (_IfTempOut!=0)) { ++ XSetWindowAttributes xswa; ++ _IfTempOut--; ++ xswa.colormap = browCmap; ++ for(i=0;i<MAXBRWIN;i++) ++ XChangeWindowAttributes(theDisp, binfo[i].win, CWColormap, &xswa); ++ XFlush(theDisp); ++ } ++#endif ++ + if (e->button == Button1) { if (e->window == br->win) clickBrow(br,x,y); else if (e->window == br->scrl.win) SCTrack(&(br->scrl),x,y); else if (e->window == br->iconW) { - i = clickIconWin(br, x,y,(unsigned long) e->time, + i = clickIconWin(br, x,y,(unsigned long) e->time, (e->state&ControlMask) || (e->state&ShiftMask)); - +- ++ } ++ else rv = 0; ++ } ++ else if (e->button == Button4) { /* note min vs. max, + vs. - */ ++ /* scroll regardless of where we are in the browser window */ ++ if (e->window == br->win || ++ e->window == br->scrl.win || ++ e->window == br->iconW) ++ { ++ SCRL *sp=&(br->scrl); ++ int halfpage=MAX(1,sp->page/2); /* user resize to 1 line? */ ++ ++ if (sp->val > sp->min+halfpage) ++ SCSetVal(sp,sp->val-halfpage); ++ else ++ SCSetVal(sp,sp->min); ++ } ++ else rv = 0; ++ } ++ else if (e->button == Button5) { /* note max vs. min, - vs. + */ ++ /* scroll regardless of where we are in the browser window */ ++ if (e->window == br->win || ++ e->window == br->scrl.win || ++ e->window == br->iconW) ++ { ++ SCRL *sp=&(br->scrl); ++ int halfpage=MAX(1,sp->page/2); /* user resize to 1 line? */ ++ ++ if (sp->val < sp->max-halfpage) ++ SCSetVal(sp,sp->val+halfpage); ++ else ++ SCSetVal(sp,sp->max); } -@@ -837,7 +836,7 @@ + else rv = 0; + } +@@ -837,7 +988,7 @@ if (br->wide != e->width || br->high != e->height) { if (DEBUG) fprintf(stderr,"Forcing a redraw! (from configure)\n"); @@ -7010,7 +12027,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (u_int) e->width, (u_int) e->height, True); resizeBrowse(br, e->width, e->height); } -@@ -877,7 +876,7 @@ +@@ -877,7 +1028,7 @@ int w,h; { XSizeHints hints; @@ -7019,7 +12036,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (br->wide == w && br->high == h) return; /* no change in size */ -@@ -895,7 +894,7 @@ +@@ -895,7 +1046,7 @@ br->iwHigh = (maxh / ISPACE_HIGH) * ISPACE_HIGH; if (br->iwHigh < ISPACE_HIGH) br->iwHigh = ISPACE_HIGH; @@ -7028,7 +12045,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (u_int) br->iwWide, (u_int) br->iwHigh); -@@ -907,11 +906,11 @@ +@@ -907,11 +1058,11 @@ for (i=0; i<BR_NBUTTS; i++) { /* 'close' always goes on right-most edge */ @@ -7042,7 +12059,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c br->but[i].x = br->wide + 10; /* offscreen */ br->but[i].y = br->high - BUTTH - 5; -@@ -928,11 +927,11 @@ +@@ -928,11 +1079,11 @@ br->numWide = br->iwWide / ISPACE_WIDE; br->visHigh = br->iwHigh / ISPACE_HIGH; @@ -7057,7 +12074,13 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c 1, br->iwHigh, 0, maxv, br->scrl.val, page); } -@@ -945,7 +944,7 @@ +@@ -940,12 +1091,12 @@ + + /***************************************************************/ + void SetBrowStr(str) +- char *str; ++ const char *str; + { /* put string in *all* browse windows */ int i; @@ -7066,15 +12089,19 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c setBrowStr(&binfo[i], str); } -@@ -956,6 +955,7 @@ - char *str; +@@ -953,9 +1104,10 @@ + /***************************************************************/ + static void setBrowStr(br, str) + BROWINFO *br; +- char *str; ++ const char *str; { strncpy(br->dispstr, str, (size_t) 256); + br->dispstr[255] = '\0'; drawBrowStr(br); XFlush(theDisp); } -@@ -992,7 +992,7 @@ +@@ -992,7 +1144,7 @@ char tmp[64]; @@ -7083,7 +12110,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c i+1, br->bfLen); setBrowStr(br, tmp); } -@@ -1011,14 +1011,14 @@ +@@ -1011,14 +1163,14 @@ { /* called when file 'name' has been deleted. If any of the browsers were showing the directory that the file was in, does a rescan() */ @@ -7093,14 +12120,24 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c char buf[MAXPATHLEN + 2], *tmp; strcpy(buf, name); - tmp = BaseName(buf); +- tmp = BaseName(buf); ++ tmp = (char *) BaseName(buf); /* intentionally losing constness */ *tmp = '\0'; /* truncate after last '/' */ - + for (i=0; i<MAXBRWIN; i++) { if (strcmp(binfo[i].path, buf)==0) rescanDir(&binfo[i]); } -@@ -1070,9 +1070,9 @@ +@@ -1043,6 +1195,8 @@ + BROWINFO *br; + int cmd; + { ++ br->lst = 0; ++ + switch (cmd) { + case BR_CHDIR: doChdirCmd(br); + break; +@@ -1070,9 +1224,9 @@ case BR_GENICON: genSelectedIcons(br); break; case BR_SELALL: { @@ -7112,7 +12149,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c br->bfList[i].lit = 1; br->numlit = br->bfLen; -@@ -1087,13 +1087,13 @@ +@@ -1087,20 +1241,25 @@ break; case BR_TEXTVIEW: doTextCmd(br); break; @@ -7124,11 +12161,24 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c case BR_HIDDEN: br->showhidden = !br->showhidden; - br->cmdMB.list[cmd] = (br->showhidden) -+ br->cmdMB.list[cmd] = (br->showhidden) - ? hideHstr : showHstr; +- ? hideHstr : showHstr; ++ br->cmdMB.list[cmd] = br->showhidden ? hideHstr : showHstr; rescanDir(br); break; -@@ -1137,16 +1137,16 @@ + + case BR_SELFILES: doSelFilesCmd(br); break; + + case BR_RECURSUP: doRecurseCmd(br); break; ++ ++ case BR_CLIPBRD: clipChanges(br); break; ++ ++#ifdef AUTO_EXPAND ++ case BR_CLEARVD: Vdsettle(); break; ++#endif + } + } + +@@ -1137,16 +1296,16 @@ if (br->bfLen != 1) sprintf(foo, "%d files", br->bfLen); else strcpy(foo, "1 file"); @@ -7148,7 +12198,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (u_int) br->dirMB.h-2, R3D_IN, 2, browhi, browlo, browbg); XSetForeground(theDisp,theGC,browfg); -@@ -1163,7 +1163,7 @@ +@@ -1163,7 +1322,7 @@ if (nf != 1) sprintf(foo,"%d files",nf); else strcpy(foo,"1 file"); @@ -7157,7 +12207,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c XClearArea(theDisp,br->win, 30, br->dirMB.y, (u_int) StringWidth(foo)+8, (u_int) br->dirMB.h+1, False); } -@@ -1185,13 +1185,13 @@ +@@ -1185,13 +1344,13 @@ XSetForeground(theDisp,theGC,browfg); XDrawRectangle(theDisp,br->win, theGC, x,y, (u_int) w, (u_int) h); @@ -7174,7 +12224,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c x+(w-br_trash_width)/2, y+(h-br_trash_height)/2, 1L); } -@@ -1222,7 +1222,7 @@ +@@ -1222,7 +1381,7 @@ y = br->high - (BUTTH+10) - (CHIGH + 6); XSetForeground(theDisp, theGC, browbg); @@ -7183,7 +12233,39 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (u_int) br->wide, (u_int) CHIGH+1); XSetForeground(theDisp, theGC, browfg); -@@ -1277,7 +1277,7 @@ +@@ -1250,6 +1409,19 @@ + int i, allowtext; + + if (!nostr) setSelInfoStr(br, sel); ++#ifdef AUTO_EXPAND ++ if (Isvdir(br->path)) { ++ BTSetActive(&br->but[BR_DELETE], 0); ++ br->cmdMB.dim[BR_DELETE] = 1; ++ ++ BTSetActive(&br->but[BR_RENAME], 0); ++ br->cmdMB.dim[BR_RENAME] = 1; ++ ++ BTSetActive(&br->but[BR_MKDIR], 0); ++ br->cmdMB.dim[BR_MKDIR] = 1; ++ } ++ else { ++#endif + BTSetActive(&br->but[BR_DELETE], br->numlit>0); + br->cmdMB.dim[BR_DELETE] = !(br->numlit>0); + +@@ -1258,6 +1430,11 @@ + + BTSetActive(&br->but[BR_GENICON], br->numlit>0); + br->cmdMB.dim[BR_GENICON] = !(br->numlit>0); ++#ifdef AUTO_EXPAND ++ BTSetActive(&br->but[BR_MKDIR], 1); ++ br->cmdMB.dim[BR_MKDIR] = 0; ++ } ++#endif + + /* turn on 'text view' cmd if exactly one non-dir is lit */ + allowtext = 0; +@@ -1277,7 +1454,7 @@ { /* sets the '# files selected' string in the brow window appropriately */ @@ -7192,16 +12274,23 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c * if no files are lit, display '' * if 1 file is lit, pretend it was selected, fall through... * if 1 or more files are lit -@@ -1316,7 +1316,7 @@ +@@ -1316,10 +1493,13 @@ else if (bf->ftype != BF_DIR) { /* no info. display file size */ struct stat st; - + sprintf(buf, "%s%s", br->path, bf->name); /* build filename */ ++#ifdef AUTO_EXPAND ++ Dirtovd(buf); ++#endif if (stat(buf, &st) == 0) { - sprintf(buf, "%s: %ld bytes", bf->name, st.st_size); -@@ -1360,8 +1360,8 @@ +- sprintf(buf, "%s: %ld bytes", bf->name, st.st_size); ++ sprintf(buf, "%s: %ld bytes", bf->name, (long)st.st_size); + strcat(buf, buf1); + } + } +@@ -1360,8 +1540,8 @@ if (j>=0 && j < br->bfLen) drawIcon(br,j); } } @@ -7212,7 +12301,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c R3D_IN, 2, browhi, browlo, browbg); } -@@ -1371,10 +1371,8 @@ +@@ -1371,10 +1551,8 @@ int delta; SCRL *sptr; { @@ -7224,7 +12313,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* figure out BROWINFO pointer from SCRL pointer */ for (i=0; i<MAXBRWIN; i++) { -@@ -1385,7 +1383,7 @@ +@@ -1385,7 +1563,7 @@ br = &binfo[i]; /* make sure we've been sized. Necessary, as creating/modifying the @@ -7233,7 +12322,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c BrowseCheckEvent() */ if (!hasBeenSized) return; -@@ -1413,12 +1411,12 @@ +@@ -1413,12 +1591,12 @@ if (y+h > br->iwHigh-4) h = (br->iwHigh-4)-y + 2; } XFillRectangle(theDisp, br->iconW, theGC, x, y, ISPACE_WIDE, (u_int) h); @@ -7248,19 +12337,20 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c R3D_IN, 2, browhi, browlo, browbg); } -@@ -1431,7 +1429,10 @@ +@@ -1431,7 +1609,11 @@ { int i,x,y,ix,iy,sw,sh,sx,sy; BFIL *bf; - char tmpstr[64], fixedname[64], *nstr, *str; -+ char tmpstr[64], *nstr, *str; ++ const char *nstr, *cstr; ++ char tmpstr[64]; +#ifdef VMS + char fixedname[64]; +#endif if (num<0 || num >= br->bfLen) return; -@@ -1463,12 +1464,12 @@ +@@ -1463,49 +1645,51 @@ } else if (bf->ftype == BF_HAVEIMG && bf->ximage) { @@ -7275,13 +12365,33 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (u_int) bf->w, (u_int) bf->h); } -@@ -1488,24 +1489,25 @@ + +- str = bf->name; ++ cstr = bf->name; + #ifdef VMS + if (bf->ftype == BF_DIR) { ++ char *vstr; + strcpy(fixedname, bf->name); +- str = rindex(fixedname, '.'); /* lop off '.DIR' suffix, if any */ +- if (str) *str = '\0'; +- str = fixedname; ++ vstr = rindex(fixedname, '.'); /* lop off '.DIR' suffix, if any */ ++ if (vstr) *vstr = '\0'; ++ cstr = fixedname; + } + #endif /* VMS */ + +- if (!strcmp(bf->name,"..")) str = "<parent>"; ++ if (!strcmp(bf->name,"..")) cstr = "<parent>"; + /* decide if the title is too big, and shorten if neccesary */ - if (StringWidth(str) > ISPACE_WIDE-6) { +- if (StringWidth(str) > ISPACE_WIDE-6) { - int dotpos; +- strncpy(tmpstr, str, (size_t) 56); ++ if (StringWidth(cstr) > ISPACE_WIDE-6) { + int dotpos; - strncpy(tmpstr, str, (size_t) 56); ++ strncpy(tmpstr, cstr, (size_t) 56); + tmpstr[56] = '\0'; /* MR: otherwise it dies on long file names */ dotpos = strlen(tmpstr); strcat(tmpstr,"..."); @@ -7299,13 +12409,14 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c + nstr = tmpstr; } - else nstr = str; +- else nstr = str; - ++ else nstr = cstr; + /* draw the title */ sw = StringWidth(nstr); -@@ -1516,12 +1518,12 @@ +@@ -1516,12 +1700,12 @@ XSetForeground(theDisp, theGC, (bf->lit && bf->lit!=ICON_ONLY) ? browfg : browbg); @@ -7320,7 +12431,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c y + ISPACE_TOP + ISIZE_HIGH + ISPACE_TTOP + CHIGH/2, nstr); } -@@ -1535,7 +1537,6 @@ +@@ -1535,7 +1719,6 @@ int i,x,y,ix,iy,w,h; BFIL *bf; @@ -7328,7 +12439,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (num<0 || num >= br->bfLen) return; bf = &(br->bfList[num]); -@@ -1579,12 +1580,12 @@ +@@ -1579,12 +1762,12 @@ y = (i / br->numWide) * ISPACE_HIGH; XSetForeground(theDisp, theGC, browbg); @@ -7344,16 +12455,54 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c R3D_IN, 2, browhi, browlo, browbg); } -@@ -1658,7 +1659,7 @@ - /* returns '-1' normally, returns an index into bfList[] if the user - double-clicks an icon */ +@@ -1597,6 +1780,10 @@ + { + int sval, first, numvis; + ++ /* if we know what path we have, remember last visible icon for this path */ ++ if (br->path) ++ recIconVisible(br->path, num); ++ + /* if icon #i isn't visible, adjust scrollbar so it *is* */ + + sval = br->scrl.val; +@@ -1648,29 +1835,14 @@ + return; + } +- + /***************************************************************/ +-static int clickIconWin(br, mx, my, mtime, multi) +- BROWINFO *br; +- int mx,my,multi; +- unsigned long mtime; ++static int updateSel(br, sel, multi, mtime) ++ BROWINFO *br; ++ int sel, multi; ++ unsigned long mtime; + { +- /* returns '-1' normally, returns an index into bfList[] if the user +- double-clicks an icon */ +- - int i,j, base, num, x,y,ix,iy, rv, sel, cpymode, dodel; -+ int i,j, rv, sel, cpymode, dodel; - BROWINFO *destBr; - BFIL *bf; - char buf[256], *destFolderName; -@@ -1681,7 +1682,7 @@ +- BROWINFO *destBr; +- BFIL *bf; +- char buf[256], *destFolderName; +- +- rv = -1; /* default return value */ +- if (!br->bfList || !br->bfLen) return rv; +- +- destBr = br; destFolderName = "."; +- +- sel = mouseInWhichIcon(br, mx, my); +- +- dodel = 0; ++ int i; ++ BFIL *bf; + + if (sel == -1) { /* clicked on nothing */ + if (!multi) { /* deselect all */ +@@ -1681,7 +1853,7 @@ } changedNumLit(br, sel, 0); @@ -7362,19 +12511,65 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c } -@@ -1725,10 +1726,9 @@ +@@ -1725,14 +1897,14 @@ changedNumLit(br, sel, 0); - + /* see if we've double-clicked something */ - if (sel==br->lastIconClicked && mtime-br->lastClickTime < DBLCLICKTIME) { +- if (sel==br->lastIconClicked && mtime-br->lastClickTime < DBLCLICKTIME) { - int k; ++ if (mtime && ++ sel==br->lastIconClicked && mtime-br->lastClickTime < DBLCLICKTIME) { br->lastIconClicked = -1; /* YES */ doubleClick(br, sel); -@@ -1759,10 +1759,10 @@ +- return rv; ++ return -1; + } + + else { +@@ -1741,9 +1913,37 @@ + } + } + +- + changedNumLit(br, -1, 0); ++ return 0; ++} ++ ++ ++/***************************************************************/ ++static int clickIconWin(br, mx, my, mtime, multi) ++ BROWINFO *br; ++ int mx,my,multi; ++ unsigned long mtime; ++{ ++ /* returns '-1' normally, returns an index into bfList[] if the user ++ double-clicks an icon */ ++ ++ int i,j, sel, cpymode, dodel; ++ BROWINFO *destBr; ++ BFIL *bf; ++ char buf[256]; ++ const char *destFolderName; ++ ++ if (!br->bfList || !br->bfLen) return -1; ++ ++ destBr = br; destFolderName = "."; + ++ sel = mouseInWhichIcon(br, mx, my); ++ dodel = 0; ++ ++ recIconVisible(br->path, sel); ++ ++ if (updateSel(br, sel, multi, mtime)) ++ return -1; + + + { /* track mouse until button1 is released */ +@@ -1759,10 +1959,10 @@ first = 1; hasrect = 0; cpymode = 0; origsval = br->scrl.val; @@ -7387,7 +12582,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c &x,&y,&mask)); if (mask & Button1Mask) { /* still held down */ -@@ -1773,7 +1773,7 @@ +@@ -1773,7 +1973,7 @@ else curs = movecurs; /* change cursors */ @@ -7396,7 +12591,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c XDefineCursor(theDisp,binfo[i].iconW, curs); samepos = oldx = oldy = oldbrnum = 0; -@@ -1785,43 +1785,43 @@ +@@ -1785,43 +1985,43 @@ if (sel>=0) { /* see if changed copy/move status (and cursor) */ int cmod; @@ -7450,7 +12645,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c &iwx,&iwy, &cW); /* find deepest child that the mouse is in */ -@@ -1837,12 +1837,12 @@ +@@ -1837,12 +2037,12 @@ /* if it's in any icon window, and we're doing icon-dragging OR we're doing a rectangle-drag */ @@ -7466,7 +12661,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c a rect drag */ if (sel>=0 && (oldx!=x || oldy!=y || oldbrnum!=i)) { /* moved */ -@@ -1873,7 +1873,7 @@ +@@ -1873,7 +2073,7 @@ } } @@ -7475,7 +12670,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* if we clicked on an icon (originally), and therefore are showing the 'move files' cursor, see if the cursor is within the icon region of any folders. If so, light up *the icon -@@ -1904,9 +1904,9 @@ +@@ -1904,9 +2104,9 @@ /* Dragging a selection rectangle. */ @@ -7487,7 +12682,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (first) { prevx = mx; prevy = my; first=0; prevcnt = -1; } -@@ -1922,18 +1922,18 @@ +@@ -1922,18 +2122,18 @@ rx = (mx < x) ? mx : x; ry = (origy < y) ? origy : y; @@ -7511,7 +12706,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c + ISPACE_TOP + ISIZE_HIGH - bf->h; iy = iy - br->scrl.val * ISPACE_HIGH; -@@ -1994,7 +1994,7 @@ +@@ -1994,7 +2194,7 @@ } /* RELEASED BUTTON: back to normal arrow cursor */ @@ -7520,7 +12715,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c XDefineCursor(theDisp, binfo[i].iconW, None); if (sel == -1) { /* was dragging rectangle */ -@@ -2007,7 +2007,7 @@ +@@ -2007,7 +2207,7 @@ if (bf->lit == TEMP_LIT || bf->lit == TEMP_LIT1) { bf->lit = 1; drawIcon(br, i); } @@ -7529,7 +12724,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (bf->lit) br->numlit++; } -@@ -2020,7 +2020,6 @@ +@@ -2020,7 +2220,6 @@ /* if doing a copy or a move, do the thing to the files */ if (sel >= 0) { @@ -7537,7 +12732,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (DEBUG) { fprintf(stderr,"---------------\n"); -@@ -2029,7 +2028,7 @@ +@@ -2029,7 +2228,7 @@ fprintf(stderr,"Dest Folder: '%s'\n", destFolderName); } @@ -7546,7 +12741,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (!br->numlit) { if (DEBUG) fprintf(stderr, "no selected files. Nothing to do!\n"); } -@@ -2042,7 +2041,7 @@ +@@ -2042,7 +2241,7 @@ if (DEBUG) fprintf(stderr, "no destination. Nothing to do!\n"); } @@ -7555,7 +12750,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcmp(br->path, destBr->path) == 0) { if (DEBUG) fprintf(stderr,"source == destination. Nothing to do!\n"); } -@@ -2067,12 +2066,12 @@ +@@ -2067,20 +2266,20 @@ } } if (DEBUG) fprintf(stderr,"\n\n"); @@ -7572,7 +12767,8 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c * in a copy command... :( RLD 26-FEB-1993 */ -@@ -2080,7 +2079,7 @@ +- *rindex ( destFolderName, '.' ) = '\0'; ++ *rindex ( destFolderName, '.' ) = '\0'; /* FIXME: potentially writing into static strings! */ #endif @@ -7581,7 +12777,25 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c ncnt, cpymode); /* free namelist */ -@@ -2155,7 +2154,7 @@ +@@ -2099,7 +2298,7 @@ + } + } /* end of 'tracking' sub-function */ + +- return rv; ++ return -1; + } + + /*******************************************/ +@@ -2113,6 +2312,8 @@ + + /* called to 'open' icon #sel, which could be a file or a dir */ + ++ br->lst = 0; ++ + /* if sel == -1, then called via RETURN key. just use first lit item + as thing that was double clicked on */ + +@@ -2155,7 +2356,7 @@ } @@ -7590,16 +12804,72 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* double-clicked something. We should do something about it */ if (br->bfList[sel].ftype == BF_DIR) { /* try to cd */ #ifndef VMS -@@ -2193,7 +2192,7 @@ +@@ -2165,15 +2366,36 @@ + else sprintf(buf, "%s%s", br->path, br->bfList[sel].name); + #endif + ++#ifdef AUTO_EXPAND ++ if (Chvdir(buf)) { ++#else + if (chdir(buf)) { ++#endif + char str[512]; + sprintf(str,"Unable to cd to '%s'\n", br->bfList[sel].name); + setBrowStr(br, str); + XBell(theDisp, 50); + } + else { ++#ifdef AUTO_EXPAND ++ if (Isvdir(buf)) { ++ BTSetActive(&br->but[BR_DELETE], 0); ++ br->cmdMB.dim[BR_DELETE] = 1; ++ ++ BTSetActive(&br->but[BR_RENAME], 0); ++ br->cmdMB.dim[BR_RENAME] = 1; ++ ++ BTSetActive(&br->but[BR_MKDIR], 0); ++ br->cmdMB.dim[BR_MKDIR] = 1; ++ } ++ else { ++ BTSetActive(&br->but[BR_MKDIR], 1); ++ br->cmdMB.dim[BR_MKDIR] = 0; ++ } ++#endif + scanDir(br); + SCSetVal(&(br->scrl), 0); /* reset to top on a chdir */ ++ restIconVisible(br); + } + } + +@@ -2193,7 +2415,26 @@ *event_retP = THISNEXT; } else { *event_retP = LOADPIC; SetDirFName(buf); } - + ++#ifdef VS_RESCMAP ++ /* Change Colormap for browser */ ++ if (browPerfect && browCmap) { ++ int i; ++ XSetWindowAttributes xswa; ++ if(LocalCmap) { ++ xswa.colormap = LocalCmap; ++ _IfTempOut=2; ++ } ++ else { ++ xswa.colormap = theCmap; ++ _IfTempOut=2; ++ } ++ for(i=0;i<MAXBRWIN;i++) ++ XChangeWindowAttributes(theDisp, binfo[i].win, CWColormap, &xswa); ++ XFlush(theDisp); ++ } ++#endif ++ *event_doneP = 1; /* make MainLoop load image */ } } -@@ -2259,7 +2258,7 @@ +@@ -2259,7 +2500,7 @@ stlen = XLookupString(kevt, buf, 128, &ks, (XComposeStatus *) NULL); shift = kevt->state & ShiftMask; ck = CursorKey(ks, shift, 1); @@ -7608,7 +12878,25 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c RemapKeyCheck(ks, buf, &stlen); -@@ -2306,7 +2305,7 @@ +@@ -2289,6 +2530,7 @@ + case '\021': doCmd(br, BR_QUIT); break; /* ^Q = Quit xv */ + + case '\006': doCmd(br, BR_SELFILES); break; /* ^F = Select Files */ ++ case '\030': doCmd(br, BR_CLIPBRD); break; /* ^X = Copy to clipboard */ + + + /* case '\003': FakeButtonPress(&but[BCMTVIEW]); break; */ /* ^C */ +@@ -2299,6 +2541,9 @@ + case '\n': doubleClick(br, -1); break; /* RETURN = load selected */ + + case ' ': ++ if (br->lst && (time(NULL) <= br->lst + incrementalSearchTimeout)) ++ goto do_default; ++ /* else fall through... */ + case '\010': + case '\177': /* SPACE = load next, BS/DEL = load prev */ + if (br->bfLen && br->numlit >= 1) { +@@ -2306,7 +2551,7 @@ char fname[MAXPATHLEN]; /* if 'shift-space' find last lit icon, select the next one after it, @@ -7617,7 +12905,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c are the only cases where br->numlit >1 allowed */ if (br->numlit>1 && buf[0] != ' ') return; -@@ -2314,7 +2313,7 @@ +@@ -2314,7 +2559,7 @@ if (buf[0]==' ' && (br->numlit>1 || (br->numlit==1 && shift))) { for (i=br->bfLen-1; i>=0 && !br->bfList[i].lit; i--); /* i=last lit */ if (i==br->bfLen-1) return; @@ -7626,16 +12914,30 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c i++; if (!shift) { for (j=0; j<br->bfLen; j++) { -@@ -2364,7 +2363,7 @@ +@@ -2348,6 +2593,9 @@ + + /* try to open this file */ + sprintf(foo, "%s%s", br->path, br->bfList[i].name); ++#ifdef AUTO_EXPAND ++ Dirtovd(foo); ++#endif + for (j=0; j<numnames && strcmp(namelist[j],foo); j++); + if (j<numnames) { + curname = nList.selected = j; +@@ -2363,8 +2611,11 @@ + else { /* not SPACE, or SPACE and lit=1 and not shift */ for (i=0; i<br->bfLen && !br->bfList[i].lit; i++); /* find lit one */ sprintf(fname, "%s%s", br->path, br->bfList[i].name); ++#ifdef AUTO_EXPAND ++ Dirtovd(fname); ++#endif viewsel = !(strcmp(fname, fullfname)); - + if (viewsel) { if (buf[0]==' ') browKey(br, CK_RIGHT); else browKey(br, CK_LEFT); -@@ -2372,7 +2371,7 @@ +@@ -2372,7 +2623,7 @@ if (!br->bfList[i].lit || !viewsel) { /* changed selection */ for (i=0; i<br->bfLen && !br->bfList[i].lit; i++); /* find it */ @@ -7644,7 +12946,26 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c doubleClick(br, -1); } } -@@ -2410,10 +2409,10 @@ +@@ -2381,7 +2632,8 @@ + + + default: /* unknown character. Take it as an alpha accelerator */ +- if (buf[0] > 32) browAlpha(br, buf[0]); ++ do_default: /* (goto-label, not switch-label) */ ++ if (buf[0] >= 32) browAlpha(br, buf[0]); + else XBell(theDisp, 0); + break; + } +@@ -2401,6 +2653,8 @@ + /* an arrow key (or something like that) was pressed in icon window. + change selection/scrollbar accordingly */ + ++ br->lst = 0; ++ + /* handle easy keys */ + if (key == CK_PAGEUP) SCSetVal(&br->scrl, br->scrl.val - br->scrl.page); + if (key == CK_PAGEDOWN) SCSetVal(&br->scrl, br->scrl.val + br->scrl.page); +@@ -2410,10 +2664,10 @@ /* handle up/down/left/right keys * * if precisely *one* item is lit, than the up/down/left/right keys move @@ -7657,7 +12978,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c * anything * * if more than one item is lit, up/down/left/right keys BEEP -@@ -2443,8 +2442,8 @@ +@@ -2443,8 +2697,8 @@ if (key == CK_DOWN) j = i + br->numWide; if (key == CK_LEFT) j = i - 1; if (key == CK_RIGHT) j = i + 1; @@ -7668,7 +12989,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c br->bfList[i].lit = 0; br->bfList[j].lit = 1; makeIconVisible(br,j); -@@ -2455,7 +2454,7 @@ +@@ -2455,7 +2709,7 @@ } } @@ -7677,7 +12998,38 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (br->numlit == 0) { /* no current selection */ if (key == CK_UP) SCSetVal(&br->scrl, br->scrl.val - 1); if (key == CK_DOWN) SCSetVal(&br->scrl, br->scrl.val + 1); -@@ -2541,13 +2540,13 @@ +@@ -2482,15 +2736,28 @@ + /* find first 'plain' file that is lexically >= than the given ch */ + + int i,j; ++ time_t now = time(NULL); + + if (!br->bfLen) return; +- if (ch <= ' ' || ch > '\177') return; /* ignore 'funny' keys */ ++ if (ch < ' ' || ch > '\177') return; /* ignore 'funny' keys */ + + for (i=0; i<br->bfLen && br->bfList[i].ftype==BF_DIR; i++); + if (i==br->bfLen) return; /* only directories in this dir */ + ++ if (!br->lst || (br->lst + incrementalSearchTimeout < now)) br->len = 0; ++ br->lst = now; ++ ++ if (br->len + 2 > br->siz) ++ if ((br->str = (char *)realloc(br->str, (br->siz = br->len + 32))) == NULL) ++ br->siz = br->len = 0; ++ ++ if (br->len + 2 <= br->siz) { ++ br->str[br->len++] = ch; ++ br->str[br->len] = '\0'; ++ } ++ + for ( ; i<br->bfLen; i++) { +- if (br->bfList[i].name[0] >= ch) break; ++ if (strncmp(br->bfList[i].name, br->str, br->len) >= 0) break; + } + + if (i==br->bfLen) i--; +@@ -2541,20 +2808,24 @@ * The VMS chdir always needs 2 components (device and directory), * so convert "/device" to "/device/000000" and convert * "/" to "/XV_Root_Device/000000" (XV_RootDevice will need to be @@ -7693,7 +13045,81 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcat ( tmppath, "/000000" ); /* add root dir for device */ else if ((br->ndirs-sel) == 1 ) strcpy ( tmppath, "/XV_Root_Device/000000" ); /* fake top level */ -@@ -2599,7 +2598,7 @@ + } + #endif + ++#ifdef AUTO_EXPAND ++ if (Chvdir(tmppath)) { ++#else + if (chdir(tmppath)) { ++#endif + char str[512]; + sprintf(str,"Unable to cd to '%s'\n", tmppath); + MBRedraw(&(br->dirMB)); +@@ -2562,8 +2833,25 @@ + XBell(theDisp, 50); + } + else { ++#ifdef AUTO_EXPAND ++ if (Isvdir(tmppath)) { ++ BTSetActive(&br->but[BR_DELETE], 0); ++ br->cmdMB.dim[BR_DELETE] = 1; ++ ++ BTSetActive(&br->but[BR_RENAME], 0); ++ br->cmdMB.dim[BR_RENAME] = 1; ++ ++ BTSetActive(&br->but[BR_MKDIR], 0); ++ br->cmdMB.dim[BR_MKDIR] = 1; ++ } ++ else { ++ BTSetActive(&br->but[BR_MKDIR], 1); ++ br->cmdMB.dim[BR_MKDIR] = 0; ++ } ++#endif + scanDir(br); + SCSetVal(&br->scrl, 0); /* reset to top of window on a chdir */ ++ restIconVisible(br); + } + } + } +@@ -2582,7 +2870,11 @@ + if ((strlen(br->path) > (size_t) 2) && br->path[strlen(br->path)-1] == '/') + br->path[strlen(br->path)-1] = '\0'; + ++#ifdef AUTO_EXPAND ++ rv = Chvdir(br->path); ++#else + rv = chdir(br->path); ++#endif + if (rv) { + char str[512]; + sprintf(str, "Unable to cd to '%s'\n", br->path); +@@ -2590,6 +2882,24 @@ + XBell(theDisp, 50); + } + ++#ifdef AUTO_EXPAND ++ if (Isvdir(br->path)) { ++ BTSetActive(&br->but[BR_DELETE], 0); ++ br->cmdMB.dim[BR_DELETE] = 1; ++ ++ BTSetActive(&br->but[BR_RENAME], 0); ++ br->cmdMB.dim[BR_RENAME] = 1; ++ ++ BTSetActive(&br->but[BR_MKDIR], 0); ++ br->cmdMB.dim[BR_MKDIR] = 1; ++ } ++ else { ++ BTSetActive(&br->but[BR_MKDIR], 1); ++ br->cmdMB.dim[BR_MKDIR] = 0; ++ } ++#endif ++ ++ restIconVisible(br); + strcat(br->path, "/"); /* put trailing '/' back on */ + return rv; + } +@@ -2599,7 +2909,7 @@ static void copyDirInfo(srcbr, dstbr) BROWINFO *srcbr, *dstbr; { @@ -7702,16 +13128,31 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (ie, one that is already showing the same directory) */ int i, oldnum, maxv, page; -@@ -2619,7 +2618,7 @@ - dstbr->dirMB.list = srcbr->mblist; +@@ -2611,15 +2921,19 @@ + /* copy mblist */ + dstbr->ndirs = srcbr->ndirs; + for (i=0; i<dstbr->ndirs; i++) { +- dstbr->mblist[i] = (char *) malloc(strlen(srcbr->mblist[i]) + 1); ++ dstbr->mblist[i] = strdup(srcbr->mblist[i]); + if (!dstbr->mblist[i]) FatalError("unable to malloc brMBlist[]"); +- strcpy(dstbr->mblist[i], srcbr->mblist[i]); + } + +- dstbr->dirMB.list = srcbr->mblist; ++#if 0 ++ dstbr->dirMB.list = srcbr->mblist; /* original bug..? */ dstbr->dirMB.nlist = srcbr->ndirs; ++#else ++ dstbr->dirMB.list = dstbr->mblist; /* fixed by */ ++ dstbr->dirMB.nlist = dstbr->ndirs; /* jp-extension. */ ++#endif - XClearArea(theDisp, dstbr->dirMB.win, dstbr->dirMB.x, dstbr->dirMB.y, + XClearArea(theDisp, dstbr->dirMB.win, dstbr->dirMB.x, dstbr->dirMB.y, dstbr->dirMB.w+3, dstbr->dirMB.h+3, False); i = StringWidth(dstbr->mblist[0]) + 10; -@@ -2644,7 +2643,7 @@ +@@ -2644,7 +2958,7 @@ if ((i&0x03) == 0) drawTemp(dstbr, i, dstbr->bfLen); if ((i & 0x3f) == 0) WaitCursor(); @@ -7720,7 +13161,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c sbf = &(srcbr->bfList[i]); dbf = &(dstbr->bfList[i]); -@@ -2670,7 +2669,7 @@ +@@ -2670,7 +2984,7 @@ if (sbf->pimage) { dbf->pimage = (byte *) malloc((size_t) dbf->w * dbf->h); if (!dbf->pimage) FatalError("ran out of memory for dbf->pimage"); @@ -7729,7 +13170,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (size_t) (dbf->w * dbf->h)); } else dbf->pimage = (byte *) NULL; -@@ -2681,10 +2680,10 @@ +@@ -2681,10 +2995,10 @@ xvbcopy((char *) sbf->ximage, (char *) dbf->ximage, sizeof(XImage)); if (sbf->ximage->data) { @@ -7742,7 +13183,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (size_t) dbf->ximage->height * dbf->ximage->bytes_per_line); } } -@@ -2701,15 +2700,15 @@ +@@ -2701,15 +3015,15 @@ computeScrlVals(dstbr, &maxv, &page); if (dstbr->scrl.val > maxv) dstbr->scrl.val = maxv; @@ -7761,7 +13202,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /***************************************************************/ static void scanDir(br) -@@ -2726,7 +2725,7 @@ +@@ -2726,7 +3040,7 @@ * and it's reasonable to expect folks to want to add their own bitmaps */ @@ -7770,18 +13211,34 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c BFIL *bf; DIR *dirp; -@@ -2775,7 +2774,7 @@ +@@ -2753,7 +3067,7 @@ + xv_getwd(path, sizeof(path)); + if (path[strlen(path)-1] != '/') strcat(path,"/"); /* add trailing '/' */ + +- for (i=0; i<br->ndirs; i++) free(br->mblist[i]); /* clear old dir names */ ++ for (i=0; i<br->ndirs; i++) free((char *) br->mblist[i]); /* clear old dir names */ + + /* path will be something like: "/u3/bradley/src/weiner/whatever/" */ + +@@ -2775,22 +3089,24 @@ /* build brMBlist */ for (i = br->ndirs-1,j=0; i>=0; i--,j++) { - size_t stlen = (i<(br->ndirs-1)) ? dirnames[i+1] - dirnames[i] -+ size_t stlen = (i<(br->ndirs-1)) ? dirnames[i+1] - dirnames[i] ++ size_t stlen = (i<(br->ndirs-1)) ? dirnames[i+1] - dirnames[i] : strlen(dirnames[i]); ++ char *copy; + +- br->mblist[j] = (char *) malloc(stlen+1); +- if (!br->mblist[j]) FatalError("unable to malloc brMBlist[]"); ++ copy = malloc(stlen+1); ++ if (!copy) FatalError("unable to malloc brMBlist[]"); - br->mblist[j] = (char *) malloc(stlen+1); -@@ -2784,13 +2783,13 @@ - strncpy(br->mblist[j], dirnames[i], stlen); - br->mblist[j][stlen] = '\0'; +- strncpy(br->mblist[j], dirnames[i], stlen); +- br->mblist[j][stlen] = '\0'; ++ strncpy(copy, dirnames[i], stlen); ++ copy[stlen] = '\0'; ++ br->mblist[j] = copy; } - + @@ -7795,7 +13252,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c br->dirMB.w+3, br->dirMB.h+3, False); i = StringWidth(br->mblist[0]) + 10; -@@ -2815,7 +2814,7 @@ +@@ -2815,7 +3131,7 @@ /* count how many files are in the list */ dirp = opendir("."); @@ -7804,7 +13261,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c endScan(br, oldbflen); setBrowStr(br, "Couldn't read current directory."); SetCursors(-1); -@@ -2827,11 +2826,11 @@ +@@ -2827,11 +3143,11 @@ #endif while ( (dp = readdir(dirp)) != NULL) { @@ -7819,7 +13276,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c br->bfLen++; } if ((br->bfLen & 0x3f) == 0) WaitCursor(); -@@ -2877,13 +2876,13 @@ +@@ -2877,13 +3193,13 @@ } else { do { dp = readdir(dirp); } @@ -7836,7 +13293,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (!dp) { br->bfLen = i; break; } /* dir got shorter... */ } -@@ -2940,11 +2939,11 @@ +@@ -2940,11 +3256,11 @@ if (w<1) w = 1; if (h<1) h = 1; @@ -7850,7 +13307,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c SetCursors(-1); } -@@ -2972,7 +2971,7 @@ +@@ -2972,10 +3288,14 @@ bf->pimage = (byte *) NULL; bf->ximage = (XImage *) NULL; bf->lit = 0; @@ -7858,8 +13315,47 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c + if (stat(bf->name, &st)==0) { ++#ifdef AUTO_EXPAND ++ bf->ftype = stat2bf((u_int) st.st_mode , bf->name); ++#else bf->ftype = stat2bf((u_int) st.st_mode); -@@ -3048,11 +3047,11 @@ ++#endif + if (bf->ftype == BF_FILE && (st.st_mode & 0111)) bf->ftype = BF_EXE; + + switch (bf->ftype) { +@@ -3007,6 +3327,7 @@ + case RFT_XBM: bf->ftype = BF_XBM; break; + case RFT_SUNRAS: bf->ftype = BF_SUNRAS; break; + case RFT_BMP: bf->ftype = BF_BMP; break; ++ case RFT_WBMP: bf->ftype = BF_BMP; break; + case RFT_UTAHRLE: bf->ftype = BF_UTAHRLE; break; + case RFT_IRIS: bf->ftype = BF_IRIS; break; + case RFT_PCX: bf->ftype = BF_PCX; break; +@@ -3014,12 +3335,22 @@ + case RFT_TIFF: bf->ftype = BF_TIFF; break; + case RFT_PDSVICAR: bf->ftype = BF_PDS; break; + case RFT_COMPRESS: bf->ftype = BF_COMPRESS; break; ++ case RFT_BZIP2: bf->ftype = BF_BZIP2; break; + case RFT_PS: bf->ftype = BF_PS; break; + case RFT_IFF: bf->ftype = BF_IFF; break; +- case RFT_TARGA: bf->ftype = BF_TARGA; break; ++ case RFT_TARGA: bf->ftype = BF_TGA; break; + case RFT_XPM: bf->ftype = BF_XPM; break; + case RFT_XWD: bf->ftype = BF_XWD; break; + case RFT_FITS: bf->ftype = BF_FITS; break; ++ case RFT_PNG: bf->ftype = BF_PNG; break; ++ case RFT_ZX: bf->ftype = BF_ZX; break; /* [JCE] */ ++ case RFT_PCD: bf->ftype = BF_PCD; break; ++ case RFT_MAG: bf->ftype = BF_MAG; break; ++ case RFT_MAKI: bf->ftype = BF_MAKI; break; ++ case RFT_PIC: bf->ftype = BF_PIC; break; ++ case RFT_PI: bf->ftype = BF_PI; break; ++ case RFT_PIC2: bf->ftype = BF_PIC2; break; ++ case RFT_MGCSFX: bf->ftype = BF_MGCSFX; break; + } + } + } +@@ -3048,11 +3379,11 @@ bfcompares++; if ((bfcompares & 0x7f)==0) WaitCursor(); @@ -7874,7 +13370,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c return strcmp(b1->name, b2->name); else if (b1->ftype == BF_DIR && b2->ftype != BF_DIR) return -1; -@@ -3108,7 +3107,7 @@ +@@ -3108,7 +3439,7 @@ for (i=0; i<bflen; i++) { bfnames[i] = (char *) malloc(strlen(br->bfList[i].name) + 1); if (!bfnames[i]) FatalError("couldn't alloc bfnames in rescanDir()"); @@ -7883,7 +13379,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcpy(bfnames[i], br->bfList[i].name); } } -@@ -3121,7 +3120,7 @@ +@@ -3121,7 +3452,7 @@ /* note, either (or both) dirnames/bfnames can be NULL, in which case their respective 'len's will be zero */ @@ -7892,7 +13388,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* sort the two name lists */ if (bflen) qsort((char *) bfnames, (size_t) bflen, sizeof(char *),namcmp); if (dirlen) qsort((char *) dirnames, (size_t) dirlen,sizeof(char *),namcmp); -@@ -3153,7 +3152,7 @@ +@@ -3153,7 +3484,7 @@ } } bflen = j; @@ -7901,7 +13397,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c for (i=j=0; i<dirlen; i++) { if (dirnames[i] && strcmp(dirnames[i],".") && strcmp(dirnames[i],"..") && -@@ -3162,21 +3161,21 @@ +@@ -3162,21 +3493,21 @@ } } dirlen = j; @@ -7928,7 +13424,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* create a new bfList */ newlen = br->bfLen - bflen + dirlen; /* oldlen - #del'd + #created */ if (newlen>0) { -@@ -3241,7 +3240,7 @@ +@@ -3241,7 +3572,7 @@ if (bf->pimage) free(bf->pimage); if (bf->ximage) xvDestroyImage(bf->ximage); } @@ -7937,7 +13433,12 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c free(br->bfList); } -@@ -3267,13 +3266,13 @@ +@@ -3263,17 +3594,17 @@ + + /***************************************************************/ + static char **getDirEntries(dir, lenP, dohidden) +- char *dir; ++ const char *dir; int *lenP; int dohidden; { @@ -7954,7 +13455,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c DIR *dirp; char **names; #ifdef NODIRENT -@@ -3294,9 +3293,9 @@ +@@ -3294,9 +3625,9 @@ /* count # of entries in dir (worst case) */ for (dirlen=0; (dp = readdir(dirp)) != NULL; dirlen++); if (!dirlen) { @@ -7966,7 +13467,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c } -@@ -3312,7 +3311,7 @@ +@@ -3312,7 +3643,7 @@ if (!dohidden) { #ifndef VMS @@ -7975,7 +13476,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcmp(dp->d_name,"." )!=0 && strcmp(dp->d_name,"..")!=0) continue; #endif -@@ -3324,7 +3323,7 @@ +@@ -3324,7 +3655,7 @@ strcpy(names[i], dp->d_name); i++; } @@ -7984,7 +13485,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (i<dirlen) dirlen = i; /* dir got shorter... */ closedir(dirp); -@@ -3359,7 +3358,7 @@ +@@ -3359,7 +3690,7 @@ static void genSelectedIcons(br) BROWINFO *br; { @@ -7993,7 +13494,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c setBrowStr(br, ""); -@@ -3395,7 +3394,7 @@ +@@ -3395,7 +3726,7 @@ BFIL *bf; { /* given a BFIL entry, load up the file. @@ -8002,9 +13503,12 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c * generate an aspect-correct 8-bit image using brow Cmap * otherwise * replace this icon with the BF_UNKNOWN, or BF_ERR icons -@@ -3408,20 +3407,20 @@ +@@ -3406,22 +3737,22 @@ + double wexpand,hexpand; + int iwide, ihigh; byte *icon24, *icon8; - char str[256], str1[256], *readname, uncompname[128]; +- char str[256], str1[256], *readname, uncompname[128]; ++ char str[256], str1[256], readname[128], uncompname[128]; char basefname[128], *uncName; - - @@ -8015,8 +13519,9 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c basefname[0] = '\0'; pinfo.pic = (byte *) NULL; pinfo.comment = (char *) NULL; - readname = bf->name; +- readname = bf->name; - ++ strncpy(readname, bf->name, sizeof(readname) - 1); + /* free any old info in 'bf' */ if (bf->imginfo) free (bf->imginfo); @@ -8027,7 +13532,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c bf->imginfo = (char *) NULL; bf->pimage = (byte *) NULL; bf->ximage = (XImage *) NULL; -@@ -3429,9 +3428,9 @@ +@@ -3429,10 +3760,10 @@ /* skip all 'special' files */ if (!ISLOADABLE(bf->ftype)) return; @@ -8035,25 +13540,83 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c + filetype = ReadFileType(bf->name); - +- if (filetype == RFT_COMPRESS) { + - if (filetype == RFT_COMPRESS) { ++ if ((filetype == RFT_COMPRESS) || (filetype == RFT_BZIP2)) { #if (defined(VMS) && !defined(GUNZIP)) /* VMS decompress doesn't like the file to have a trailing .Z in fname -@@ -3442,7 +3441,7 @@ + however, GUnZip is OK with it, which we are calling UnCompress */ +@@ -3442,10 +3773,10 @@ #else uncName = bf->name; #endif - +- if (UncompressFile(uncName, uncompname)) { + - if (UncompressFile(uncName, uncompname)) { ++ if (UncompressFile(uncName, uncompname, filetype)) { filetype = ReadFileType(uncompname); - readname = uncompname; -@@ -3453,61 +3452,61 @@ +- readname = uncompname; ++ strncpy(readname, uncompname, sizeof(readname) - 1); + } + else { + sprintf(str, "Couldn't uncompress file '%s'", bf->name); +@@ -3453,71 +3784,139 @@ bf->ftype = BF_ERROR; } } - + ++#ifdef MACBINARY ++ if (handlemacb && macb_file == True && bf->ftype != BF_ERROR) { ++ if (RemoveMacbinary(readname, uncompname)) { ++ if (strcmp(readname, bf->name)!=0) unlink(readname); ++ strncpy(readname, uncompname, sizeof(readname) - 1); ++ } ++ else { ++ sprintf(str, "Unable to remove a InfoFile header form '%s'.", bf->name); ++ setBrowStr(br, str); ++ bf->ftype = BF_ERROR; ++ } ++ } ++#endif ++ ++#ifdef HAVE_MGCSFX_AUTO ++ if (bf->ftype != BF_ERROR) { ++ if(filetype == RFT_MGCSFX){ ++ char tmpname[128]; ++ char *icom; ++ ++ if((icom = mgcsfx_auto_input_com(bf->name)) != NULL){ ++ sprintf(tmpname, "%s/xvmsautoXXXXXX", tmpdir); ++#ifdef USE_MKSTEMP ++ close(mkstemp(tmpname)); ++#else ++ mktemp(tmpname); ++#endif ++ SetISTR(ISTR_INFO, "Converting to known format by MgcSfx auto..."); ++ sprintf(str,"%s >%s", icom, tmpname); ++ }else goto ms_auto_no; ++ ++#ifndef VMS ++ if (system(str)) ++#else ++ if (!system(str)) ++#endif ++ { ++ sprintf(str, "Unable to convert '%s' by MgcSfx auto.", bf->name); ++ setBrowStr(br, str); ++ bf->ftype = BF_ERROR; ++ } ++ else { ++ filetype = ReadFileType(tmpname); ++ if (strcmp(readname, bf->name)!=0) unlink(readname); ++ strncpy(readname, tmpname, sizeof(readname) - 1); ++ } ++ } ++ } ++ms_auto_no: ++#endif /* HAVE_MGCSFX_AUTO */ ++ /* get rid of comments. don't need 'em */ if (pinfo.comment) free(pinfo.comment); pinfo.comment = (char *) NULL; - @@ -8076,6 +13639,9 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* otherwise it's a known filetype... do the *hard* part now... */ - + ++#ifdef VS_ADJUST ++ normaspect = defaspect; ++#endif i = ReadPicFile(readname, filetype, &pinfo, 1); KillPageFiles(pinfo.pagebname, pinfo.numpages); - @@ -8101,9 +13667,10 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c - + /* if we made an uncompressed file, we can rm it now */ - if (readname != bf->name) unlink(readname); +- if (readname != bf->name) unlink(readname); - - ++ if (strcmp(readname, bf->name)!=0) unlink(readname); + + /* at this point either BF_ERROR, BF_UNKNOWN, BF_EXE or pic */ @@ -8127,10 +13694,34 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* compute size of icon (iwide,ihigh) */ - + ++#ifdef VS_ADJUST ++ if (!vsadjust) normaspect = 1; ++ ++ wexpand = (double) (pinfo.w * normaspect) / (double) ISIZE_WIDE; ++#else wexpand = (double) pinfo.w / (double) ISIZE_WIDE; ++#endif /* VS_ADJUST */ hexpand = (double) pinfo.h / (double) ISIZE_HIGH; -@@ -3527,13 +3526,13 @@ + if (wexpand >= 1.0 || hexpand >= 1.0) { /* don't expand small icons */ + if (wexpand>hexpand) { ++#ifdef VS_ADJUST ++ iwide = (int) ((pinfo.w * normaspect) / wexpand + 0.5); ++#else + iwide = (int) (pinfo.w / wexpand + 0.5); ++#endif + ihigh = (int) (pinfo.h / wexpand + 0.5); + } + else { ++#ifdef VS_ADJUST ++ iwide = (int) ((pinfo.w * normaspect) / hexpand + 0.5); ++#else + iwide = (int) (pinfo.w / hexpand + 0.5); ++#endif + ihigh = (int) (pinfo.h / hexpand + 0.5); + } + } +@@ -3527,13 +3926,13 @@ /* generate icon */ @@ -8146,7 +13737,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcat(str,"GIF89 file"); else strcat(str,"GIF87 file"); -@@ -3543,12 +3542,12 @@ +@@ -3543,12 +3942,12 @@ case RFT_PBM: if (xv_strstr(pinfo.fullInfo, "raw")) strcat(str,"Raw "); else strcat(str,"Ascii "); @@ -8161,8 +13752,19 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcat(str," file"); break; -@@ -3569,19 +3568,19 @@ +@@ -3567,21 +3966,30 @@ + case RFT_XPM: strcat(str,"XPM file"); break; + case RFT_XWD: strcat(str,"XWD file"); break; case RFT_FITS: strcat(str,"FITS file"); break; ++ case RFT_PNG: strcat(str,"PNG file"); break; ++ case RFT_ZX: strcat(str,"Spectrum SCREEN$"); break; /* [JCE] */ ++ case RFT_PCD: strcat(str,"PhotoCD file"); break; ++ case RFT_MAG: strcat(str,"MAG file"); break; ++ case RFT_MAKI: strcat(str,"MAKI file"); break; ++ case RFT_PIC: strcat(str,"PIC file"); break; ++ case RFT_PI: strcat(str,"PI file"); break; ++ case RFT_PIC2: strcat(str,"PIC2 file"); break; ++ case RFT_MGCSFX: strcat(str,"Magic Suffix file"); break; default: strcat(str,"file of unknown type"); break; } - @@ -8185,7 +13787,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c sprintf(buf," (%ld bytes)", filesize); strcat(str, buf); } -@@ -3609,17 +3608,17 @@ +@@ -3609,17 +4017,17 @@ bf->w = iwide; bf->h = ihigh; bf->ftype = BF_HAVEIMG; @@ -8206,7 +13808,18 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* -@@ -3682,7 +3681,7 @@ +@@ -3670,6 +4078,10 @@ + + sprintf(thFname, "%s%s/%s", br->path, THUMBDIR, bf->name); + ++#ifdef AUTO_EXPAND ++ Dirtovd(thFname); ++#endif ++ + fp = fopen(thFname, "r"); + if (!fp) return; /* nope, it doesn't have one */ + +@@ -3682,7 +4094,7 @@ /* read comments until we see '#END_OF_COMMENTS', or hit EOF */ while (1) { if (!fgets(buf, 256, fp)) goto errexit; @@ -8215,7 +13828,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (!strncmp(buf, "#END_OF_COMMENTS", strlen("#END_OF_COMMENTS"))) break; -@@ -3714,7 +3713,7 @@ +@@ -3714,7 +4126,7 @@ /* read width, height, maxval */ @@ -8224,7 +13837,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c goto errexit; -@@ -3738,14 +3737,14 @@ +@@ -3738,14 +4150,14 @@ bf->h = h; bf->ftype = BF_HAVEIMG; bf->imginfo = info; @@ -8242,7 +13855,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c fclose(fp); return; -@@ -3757,7 +3756,7 @@ +@@ -3757,7 +4169,7 @@ } @@ -8251,8 +13864,15 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /***************************************************************/ static void writeThumbFile(br, bf, icon8, w, h, info) BROWINFO *br; -@@ -3787,7 +3786,7 @@ +@@ -3785,9 +4197,14 @@ + + sprintf(thFname, "%s%s/%s", br->path, THUMBDIR, bf->name); ++#ifdef AUTO_EXPAND ++ Dirtovd(thFname); ++#endif ++ ++ unlink(thFname); /* just in case there's already an unwritable one */ fp = fopen(thFname, "w"); if (!fp) { - sprintf(buf, "Can't create thumbnail file '%s': %s", thFname, @@ -8260,7 +13880,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c ERRSTR(errno)); setBrowStr(br, buf); return; /* can't write... */ -@@ -3829,9 +3828,9 @@ +@@ -3829,9 +4246,9 @@ setBrowStr(br, buf); return; /* can't write... */ } @@ -8272,27 +13892,93 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c chmod(thFname, (mode_t) perm); } -@@ -3915,7 +3914,7 @@ +@@ -3849,15 +4266,29 @@ + + sprintf(thFname, "%s%s", br->path, THUMBDIRNAME); + ++#ifdef AUTO_EXPAND ++ Dirtovd(thFname); ++#endif ++ + i = stat(thFname, &st); + if (i) { /* failed, let's create it */ + sprintf(thFname, "%s.", br->path); ++#ifdef AUTO_EXPAND ++ Dirtovd(thFname); ++#endif + i = stat(thFname, &st); /* get permissions of parent dir */ + if (!i) perm = st.st_mode & 07777; + else perm = 0755; + + sprintf(thFname, "%s%s", br->path, THUMBDIRNAME); +- mkdir(thFname, (mode_t) perm); ++#ifdef AUTO_EXPAND ++ Dirtovd(thFname); ++#endif ++ i = mkdir(thFname, (mode_t) perm); ++#ifdef VIRTUAL_TD ++ if (i < 0) ++ Mkvdir_force(thFname); ++#endif + } + } + +@@ -3899,7 +4330,7 @@ + for (i=0, bf=br->bfList; i<br->bfLen; i++, bf++) { + if (bf->ftype <= BF_FILE || bf->ftype >= BF_ERROR || bf->ftype==BF_EXE) { - if (s1 || s2 || filest.st_mtime > thumbst.st_mtime || - filest.st_ctime > thumbst.st_ctime) { +- /* ie, not a 'special' file */ ++ /* i.e., not a 'special' file */ + + int s1, s2; + char thfname[256]; +@@ -3913,10 +4344,9 @@ + sprintf(thfname, "%s/%s", THUMBDIR, bf->name); + s2 = stat(thfname, &thumbst); + +- if (s1 || s2 || filest.st_mtime > thumbst.st_mtime || +- filest.st_ctime > thumbst.st_ctime) { - /* either stat'ing the file or the thumbfile failed, or +- both stat's succeeded and the file has a newer mod or creation ++ if (s1 || s2 || filest.st_mtime > thumbst.st_mtime) { + /* either stat'ing the file or the thumbfile failed, or - both stat's succeeded and the file has a newer mod or creation ++ both stat's succeeded and the file has a newer mod time than the thumbnail file */ -@@ -3926,8 +3925,8 @@ + makeIconVisible(br, i); +@@ -3926,11 +4356,16 @@ if (bf->ftype != BF_EXE) { iconsBuilt++; - if (DEBUG) - fprintf(stderr,"icon made:fname='%s' thfname='%s' %d,%d,%d,%d\n", +- bf->name, thfname, s1,s2,filest.st_mtime,thumbst.st_mtime); + if (DEBUG) + fprintf(stderr,"icon made:fname='%s' thfname='%s' %d,%d,%ld,%ld\n", - bf->name, thfname, s1,s2,filest.st_mtime,thumbst.st_mtime); ++ bf->name, thfname, s1, s2, ++ (long)filest.st_mtime, (long)thumbst.st_mtime); } } -@@ -3974,7 +3973,7 @@ ++ else if (filest.st_ctime > thumbst.st_ctime) { ++ /* update protections */ ++ chmod(thfname, (mode_t) (filest.st_mode & 07777)); ++ } + } + statcount++; + +@@ -3964,7 +4399,11 @@ + sprintf(thfname, "%s/%s", THUMBDIR, dp->d_name); + if (stat(thfname, &thumbst)==0) { /* success */ + int tmp; ++#ifdef AUTO_EXPAND ++ tmp = stat2bf((u_int) thumbst.st_mode , thfname); ++#else + tmp = stat2bf((u_int) thumbst.st_mode); ++#endif + + if (tmp == BF_FILE) { /* a plain file */ + /* see if this thumbfile has an associated pic file */ +@@ -3974,7 +4413,7 @@ } } statcount++; @@ -8301,7 +13987,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if ((statcount % 30)==0) WaitCursor(); } closedir(dirp); -@@ -3998,16 +3997,16 @@ +@@ -3998,16 +4437,16 @@ { if (maxcnt<1) return; /* none of that naughty ol' divide by zero stuff */ @@ -8321,7 +14007,30 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (u_int) br->dirMB.x-10+1, (u_int) br->dirMB.h + 1, True); } -@@ -4048,7 +4047,7 @@ +@@ -4038,17 +4477,26 @@ + pops up a 'what do you want to rename it to' box, and attempts to + do the trick... */ + +- int i, num; +- char buf[128], txt[256], *origname, txt1[256]; +- static char *labels[] = { "\nOk", "\033Cancel" }; +- struct stat st; ++ int i, num; ++ char buf[128], txt[256], *origname, txt1[256]; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ struct stat st; ++ ++#ifdef AUTO_EXPAND ++ if (Isvdir(br->path)) { ++ sprintf(buf,"Sorry, you can't rename file in the virtual directory, '%s'", ++ br->path); ++ ErrPopUp(buf, "\nBummer!"); ++ return; ++ } ++#endif + + if (cdBrow(br)) return; + /* find the selected file */ for (i=0; i<br->bfLen && !br->bfList[i].lit; i++); if (i==br->bfLen) return; /* shouldn't happen */ @@ -8330,7 +14039,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c origname = br->bfList[i].name; num = i; if (strcmp(origname, "..")==0) { -@@ -4058,7 +4057,7 @@ +@@ -4058,7 +4506,7 @@ return; } @@ -8339,7 +14048,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (br->bfList[i].ftype==BF_DIR) ? "directory" : "file", origname); -@@ -4107,7 +4106,7 @@ +@@ -4107,7 +4555,7 @@ drawIcon(br, num); for (i=0; i<MAXBRWIN; i++) { @@ -8348,7 +14057,28 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c rescanDir(&binfo[i]); } -@@ -4133,7 +4132,7 @@ +@@ -4125,15 +4573,24 @@ + pops up a 'what do you want to call it' box, and attempts to + do the trick... */ + +- int i; +- char buf[128], txt[256]; +- static char *labels[] = { "\nOk", "\033Cancel" }; +- struct stat st; ++ int i; ++ char buf[128], txt[256]; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ struct stat st; ++ ++#ifdef AUTO_EXPAND ++ if (Isvdir(br->path)) { ++ sprintf(buf,"Sorry, you can't mkdir in the virtual directory, '%s'", ++ br->path); ++ ErrPopUp(buf, "\nBummer!"); ++ return; ++ } ++#endif + if (cdBrow(br)) return; buf[0] = '\0'; @@ -8357,7 +14087,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c buf, 128, "/ |\'\"<>,", 0); if (i) return; /* cancelled */ -@@ -4161,7 +4160,7 @@ +@@ -4161,7 +4618,7 @@ /* rescan current br, and all other br's pointing to same directory */ for (i=0; i<MAXBRWIN; i++) { @@ -8366,25 +14096,93 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c rescanDir(&binfo[i]); } -@@ -4179,7 +4178,7 @@ - int i; - static char buf[MAXPATHLEN+100]; - static char *labels[] = { "\nOk", "\033Cancel" }; +@@ -4176,10 +4633,10 @@ + static void doChdirCmd(br) + BROWINFO *br; + { +- int i; +- static char buf[MAXPATHLEN+100]; +- static char *labels[] = { "\nOk", "\033Cancel" }; - char str[512]; -+ char str[512]; ++ int i; ++ static char buf[MAXPATHLEN+100]; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char str[512]; buf[0] = '\0'; i = GetStrPopUp("Change to directory:", labels, 2, buf, MAXPATHLEN, " ", 0); -@@ -4226,7 +4225,7 @@ +@@ -4198,14 +4655,35 @@ + if (cdBrow(br)) return; /* prints its own error message */ + } + ++#ifdef AUTO_EXPAND ++ if (Chvdir(buf)) { ++#else + if (chdir(buf)) { ++#endif + sprintf(str,"Unable to cd to '%s'\n", buf); + setBrowStr(br, str); + XBell(theDisp, 50); + } + else { ++#ifdef AUTO_EXPAND ++ if (Isvdir(buf)) { ++ BTSetActive(&br->but[BR_DELETE], 0); ++ br->cmdMB.dim[BR_DELETE] = 1; ++ ++ BTSetActive(&br->but[BR_RENAME], 0); ++ br->cmdMB.dim[BR_RENAME] = 1; ++ ++ BTSetActive(&br->but[BR_MKDIR], 0); ++ br->cmdMB.dim[BR_MKDIR] = 1; ++ } ++ else { ++ BTSetActive(&br->but[BR_MKDIR], 1); ++ br->cmdMB.dim[BR_MKDIR] = 0; ++ } ++#endif + scanDir(br); + SCSetVal(&(br->scrl), 0); /* reset to top on a chdir */ ++ restIconVisible(br); + } + } + +@@ -4225,10 +4703,19 @@ + * call 'rm_dir()' for each of the directories */ - BFIL *bf; +- BFIL *bf; - int i, j, numdirs, numfiles, slen, firstdel; -+ int i, numdirs, numfiles, slen, firstdel; - char buf[512]; - static char *yesno[] = { "\004Delete", "\033Cancel" }; +- char buf[512]; +- static char *yesno[] = { "\004Delete", "\033Cancel" }; ++ BFIL *bf; ++ int i, numdirs, numfiles, slen, firstdel; ++ char buf[512]; ++ static const char *yesno[] = { "\004Delete", "\033Cancel" }; ++ ++#ifdef AUTO_EXPAND ++ if (Isvdir(br->path)) { ++ sprintf(buf,"Sorry, you can't delete file at the virtual directory, '%s'", ++ br->path); ++ ErrPopUp(buf, "\nBummer!"); ++ return; ++ } ++#endif -@@ -4258,7 +4257,7 @@ + if (!br->bfLen || !br->bfList || !br->numlit) return; + +@@ -4252,13 +4739,17 @@ + for (i=0, bf=br->bfList; i<br->bfLen; i++,bf++) { + if (bf->lit) { + if (firstdel == -1) firstdel = i; +- if (bf->ftype == BF_DIR) numdirs++; ++ if (bf->ftype == BF_DIR ++#ifdef AUTO_EXPAND ++ && (!Isarchive(bf->name)) ++#endif ++ ) numdirs++; + else numfiles++; + } } @@ -8393,8 +14191,25 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c confirmation box */ if (numfiles) { -@@ -4281,7 +4280,7 @@ - i = PopUp(buf, yesno, 2); +@@ -4266,7 +4757,12 @@ + slen = strlen(buf); + + for (i=0, bf=br->bfList; i<br->bfLen; i++,bf++) { ++#ifdef AUTO_EXPAND ++ if (bf->lit && (bf->ftype != BF_DIR || Isarchive(bf->name))) { ++#else + if (bf->lit && bf->ftype != BF_DIR) { ++#endif ++ + if ( (slen + strlen(bf->name) + 1) > 256) { + strcat(buf,"..."); + break; +@@ -4278,10 +4774,10 @@ + } + } + +- i = PopUp(buf, yesno, 2); ++ i = PopUp(buf, yesno, COUNT(yesno)); if (i) return; /* cancelled */ } - @@ -8402,7 +14217,26 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* if any directories are being toasted, bring up the are you REALLY sure confirmation box */ -@@ -4309,7 +4308,7 @@ +@@ -4291,7 +4787,11 @@ + slen = strlen(buf); + + for (i=0, bf=br->bfList; i<br->bfLen; i++,bf++) { ++#ifdef AUTO_EXPAND ++ if (bf->lit && (bf->ftype == BF_DIR || !Isarchive(bf->name))) { ++#else + if (bf->lit && bf->ftype == BF_DIR) { ++#endif + if ( (slen + strlen(bf->name) + 1) > 256) { + strcat(buf,"..."); + break; +@@ -4303,16 +4803,20 @@ + } + } + +- i = PopUp(buf, yesno, 2); ++ i = PopUp(buf, yesno, COUNT(yesno)); + if (i) return; /* cancelled */ + } /* okay, at this point they've been warned. do the deletion */ @@ -8410,8 +14244,16 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c + for (i=0, bf=br->bfList; i<br->bfLen; i++,bf++) { if (bf->lit) { - if (bf->ftype == BF_DIR) rm_dir (br, bf->name); -@@ -4340,7 +4339,7 @@ +- if (bf->ftype == BF_DIR) rm_dir (br, bf->name); ++ if (bf->ftype == BF_DIR ++#ifdef AUTO_EXPAND ++ && !Isarchive(bf->name) ++#endif ++ ) rm_dir (br, bf->name); + else rm_file(br, bf->name); + } + } +@@ -4340,7 +4844,7 @@ /* rescan other br's that are looking at this directory */ for (i=0; i<MAXBRWIN; i++) { @@ -8420,34 +14262,48 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c rescanDir(&binfo[i]); } -@@ -4356,7 +4355,7 @@ - int i; - static char buf[MAXPATHLEN+100]; - static char *labels[] = { "\nOk", "\033Cancel" }; +@@ -4353,10 +4857,10 @@ + static void doSelFilesCmd(br) + BROWINFO *br; + { +- int i; +- static char buf[MAXPATHLEN+100]; +- static char *labels[] = { "\nOk", "\033Cancel" }; - char str[512]; -+ char str[512]; ++ int i; ++ static char buf[MAXPATHLEN+100]; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char str[512]; buf[0] = '\0'; strcpy(str,"Select file name(s). Wildcard '*' is allowed. "); -@@ -4396,7 +4395,7 @@ +@@ -4394,9 +4898,9 @@ + static void doRecurseCmd(br) + BROWINFO *br; { - int i; - static char *labels[] = { "\nOk", "\033Cancel" }; +- int i; +- static char *labels[] = { "\nOk", "\033Cancel" }; - char str[512]; -+ char str[512]; ++ int i; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char str[512]; strcpy(str,"Recursive Update: This could take *quite* a while.\n"); strcat(str,"Are you sure?"); -@@ -4415,7 +4414,7 @@ +@@ -4415,9 +4919,9 @@ /*******************************************/ -static void recurseUpdate(br, subdir) +- BROWINFO *br; +- char *subdir; +static void recurseUpdate(br, subdir) - BROWINFO *br; - char *subdir; ++ BROWINFO *br; ++ const char *subdir; { -@@ -4430,7 +4429,7 @@ + /* note: 'br->path + subdir' is the full path to recurse down from */ + +@@ -4430,7 +4934,7 @@ * and for each subdir in this dir, recurse * * if cur dir != orig dir, cd back to orig dir and reload 'br' @@ -8456,7 +14312,19 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c int i; char orgDir[MAXPATHLEN + 2]; -@@ -4449,7 +4448,7 @@ +@@ -4441,7 +4945,11 @@ + xv_getwd(orgDir, sizeof(orgDir)); + + sprintf(curDir, "%s%s", br->path, subdir); ++#ifdef AUTO_EXPAND ++ if (Chvdir(curDir)) { ++#else + if (chdir(curDir)) { ++#endif + char str[512]; + sprintf(str, "Unable to cd to '%s'\n", curDir); + setBrowStr(br, str); +@@ -4449,18 +4957,28 @@ } xv_getwd(curDir, sizeof(curDir)); @@ -8465,7 +14333,28 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* have we looped? */ for (i=0; i<dirStackLen && strcmp(curDir, dirStack[i]); i++); if (i<dirStackLen) { /* YES */ -@@ -4481,8 +4480,8 @@ ++#ifdef AUTO_EXPAND ++ Chvdir(orgDir); ++#else + chdir(orgDir); ++#endif ++ restIconVisible(br); + return; + } + + sp = (char *) malloc((size_t) strlen(curDir) + 1); + if (!sp) { + setBrowStr(br, "malloc() error in recurseUpdate()\n"); ++#ifdef AUTO_EXPAND ++ Chvdir(orgDir); ++#else + chdir(orgDir); ++#endif ++ restIconVisible(br); + return; + } + +@@ -4481,8 +4999,8 @@ /* do subdirectories of this directory, not counting . .. and .xvpics */ for (i=0; i<br->bfLen; i++) { bf = &(br->bfList[i]); @@ -8476,7 +14365,32 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcmp(bf->name, ".") && strcmp(bf->name, "..") && strcmp(bf->name, THUMBDIRNAME) ) { -@@ -4524,7 +4523,7 @@ +@@ -4495,7 +5013,12 @@ + + xv_getwd(curDir, sizeof(curDir)); + if (strcmp(orgDir, curDir)) { /* change back to orgdir */ ++#ifdef AUTO_EXPAND ++ Chvdir(orgDir); ++#else + chdir(orgDir); ++#endif ++ restIconVisible(br); + scanDir(br); + } + } +@@ -4519,12 +5042,19 @@ + setBrowStr(br, buf); + } + ++#ifdef AUTO_EXPAND ++ if (Rmvdir(name)) { ++ sprintf(buf, "fail to remove virturl directory: %s", name); ++ setBrowStr(br, buf); ++ } ++#endif ++ + /* try to delete a thumbnail file, as well. ignore errors */ + strcpy(buf1, name); /* tmp1 = leading path of name */ tmp = (char *) rindex(buf1, '/'); if (!tmp) strcpy(buf1,"."); else *tmp = '\0'; @@ -8485,7 +14399,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c sprintf(buf, "%s/%s/%s", buf1, THUMBDIR, BaseName(name)); if (DEBUG) fprintf(stderr," (%s)\n", buf); -@@ -4548,7 +4547,7 @@ +@@ -4548,7 +5078,7 @@ BROWINFO *br; { /* recursively delete this directory, and all things under it */ @@ -8494,7 +14408,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c int i, dirlen, longpath, oldpathlen; char **names, *name, buf[512]; struct stat st; -@@ -4569,7 +4568,7 @@ +@@ -4569,7 +5099,7 @@ name = names[i]; /* skip . and .. (not that we should ever see them... */ @@ -8503,16 +14417,24 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (name[1]=='.' && name[2]=='\0'))) goto done; if (strlen(name) + oldpathlen >= (MAXPATHLEN-3)) { -@@ -4586,7 +4585,7 @@ +@@ -4586,15 +5116,22 @@ rmdirPath[oldpathlen] = '\0'; goto done; } - +- if (stat2bf((u_int) st.st_mode) == BF_DIR) { /* skip, for now */ ++ ++#ifdef AUTO_EXPAND ++ if ((stat2bf((u_int) st.st_mode , rmdirPath) == BF_DIR) ++ && !Isarchive(rmdirPath)) /* skip, for now */ ++#else + - if (stat2bf((u_int) st.st_mode) == BF_DIR) { /* skip, for now */ ++ if (stat2bf((u_int) st.st_mode) == BF_DIR) /* skip, for now */ ++#endif ++ { rmdirPath[oldpathlen] = '\0'; continue; /* don't remove from list */ -@@ -4594,7 +4593,7 @@ + } rm_file(br, rmdirPath); rmdirPath[oldpathlen] = '\0'; @@ -8521,16 +14443,28 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c done: /* remove name from list */ free(name); names[i] = (char *) NULL; -@@ -4645,19 +4644,19 @@ +@@ -4640,30 +5177,35 @@ + static int overwrite; + #define OWRT_ASK 0 +-#define OWRT_NOASK 1 +-#define OWRT_CANCEL 2 +- ++#define OWRT_ALWAYS 1 ++#define OWRT_NEVER 2 ++#define OWRT_CANCEL 3 /*******************************************/ -static void dragFiles(srcBr, dstBr, srcpath, dstpath, dstdir, +static void dragFiles(srcBr, dstBr, srcpath, dstpath, dstdir, names, nlen, cpymode) - BROWINFO *srcBr, *dstBr; - char *srcpath, *dstpath, *dstdir, **names; - int nlen, cpymode; +- BROWINFO *srcBr, *dstBr; +- char *srcpath, *dstpath, *dstdir, **names; +- int nlen, cpymode; ++ BROWINFO *srcBr, *dstBr; ++ char *srcpath, *dstpath, **names; ++ const char *dstdir; ++ int nlen, cpymode; { - /* move or copy file(s) and their associated thumbnail files. + /* move or copy file(s) and their associated thumbnail files. @@ -8544,16 +14478,78 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c char dstp[MAXPATHLEN + 1]; char src[MAXPATHLEN+1], dst[MAXPATHLEN+1]; char buf[128]; -@@ -4750,7 +4749,7 @@ + struct stat st; + + ++ /* if the source directory is read-only, don't move files; copy them */ ++ if (!cpymode && (access(srcpath, W_OK) != 0)) ++ cpymode = 1; ++ + /* build real destination dir */ + strcpy(dstp, dstpath); + +@@ -4677,11 +5219,26 @@ + } + else if (strcmp(dstdir,".")!=0) sprintf(dstp, "%s%s/", dstpath, dstdir); + ++#ifdef AUTO_EXPAND ++ if (Isvdir(dstp)) { ++ sprintf(buf,"Sorry, you can't %s to the virtual directory, '%s'", ++ cpymode ? "copy" : "move", dstp); ++ ErrPopUp(buf, "\nBummer!"); ++ SetCursors(-1); ++ return; ++ } ++ if (Isvdir(srcpath)) ++ cpymode = 1; ++#endif ++ + + /* if there is a thumbnail directory in 'srcpath', make one for dstpath */ + sprintf(src,"%s%s", srcpath, THUMBDIR); + dothumbs = 0; ++#ifdef AUTO_EXPAND ++ Dirtovd(src); ++#endif + if (stat(src, &st)==0) { + sprintf(dst,"%s%s", dstp, THUMBDIR); + mkdir(dst, st.st_mode & 07777); +@@ -4712,6 +5269,14 @@ + if (overwrite == OWRT_CANCEL) break; /* abort move */ + if (j==1) fail++; + ++#ifdef AUTO_EXPAND ++ if (!cpymode && j==0) ++ if (Movevdir(src,dst)) { ++ sprintf(buf, "fail to move virturl directory: %s", names[i]); ++ setBrowStr(srcBr, buf); ++ } ++#endif ++ + if (dothumbs && j==0) { + sprintf(src,"%s%s/%s", srcpath, THUMBDIR, names[i]); + sprintf(dst,"%s%s/%s", dstp, THUMBDIR, names[i]); +@@ -4749,8 +5314,17 @@ + } + ++ if (!cpymode) { ++ /* clear all lit files in the source folder (as they've been moved) ++ note: this won't be the optimal behavior if any files failed to ++ move, but screw it, that's not going to happen too often... */ ++ for (i=0; i<srcBr->bfLen; i++) srcBr->bfList[i].lit = 0; ++ srcBr->numlit = 0; ++ } ++ ++ /* clear all files in the destination folder */ - for (i=0; i<dstBr->bfLen; i++) { + for (i=0; i<dstBr->bfLen; i++) { dstBr->bfList[i].lit = 0; } dstBr->numlit = 0; -@@ -4760,10 +4759,10 @@ +@@ -4760,10 +5334,10 @@ for (i=0; i<nlen; i++) { char *name; BFIL *bf; name = names[i]; @@ -8567,7 +14563,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c } } -@@ -4783,10 +4782,10 @@ +@@ -4783,10 +5357,10 @@ changedNumLit(srcBr, -1, 0); @@ -8580,16 +14576,120 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c (cpymode) ? "copied" : "moved"); else buf[0] = '\0'; setBrowStr(srcBr, buf); -@@ -4824,7 +4823,7 @@ +@@ -4794,7 +5368,51 @@ + SetCursors(-1); + } + ++static int recursive_remove(dir) ++ char *dir; ++{ ++ DIR *dp = NULL; ++ struct dirent *di; ++ char name[MAXPATHLEN+1]; ++ ++ strncpy(name, dir, MAXPATHLEN); ++ name[MAXPATHLEN] = 0; ++ ++ if (name[strlen(name) - 1] == '/') ++ name[strlen(name) - 1] = 0; ++ ++ if ((dp = opendir(name)) == NULL) ++ goto err; ++ ++ while ((di = readdir(dp)) != NULL) { ++ char buf[MAXPATHLEN+1]; ++ struct stat st; ++ ++ if (!strcmp(di->d_name, ".") || !strcmp(di->d_name, "..")) ++ continue; ++ ++ snprintf(buf, MAXPATHLEN, "%s/%s", name, di->d_name); ++ ++ if (stat(buf, &st) < 0) ++ continue; ++ ++ if (S_ISDIR(st.st_mode)) { ++ if (recursive_remove(buf) < 0) ++ goto err; ++ } else ++ unlink(buf); ++ } + ++ if (rmdir(name) < 0) ++ goto err; ++ ++ closedir(dp); ++ return 0; ++ ++err: ++ if (dp) closedir(dp); ++ return -1; ++} + + /*************************************************/ + static int moveFile(src,dst) +@@ -4809,34 +5427,48 @@ + One bit of noise: if destination file exists, pop up a Overwrite? + warning box. */ + +- int i, srcdir, dstdir; +- struct stat st; +- char buf[512]; +- static char *owbuts[4] = { "\nOk", "dDon't ask", "nNo", "\033Cancel" }; ++ int i, srcdir, dstdir; ++ struct stat st; ++ char buf[512]; ++ static const char *owbuts[] = { "\nOk", "aAlways", "nNo", "NNever", "\033Cancel" }; + + if (DEBUG) fprintf(stderr,"moveFile %s %s\n", src, dst); + ++#ifdef AUTO_EXPAND ++ Dirtosubst(src); ++#endif ++ + if (stat(src, &st)) return 0; /* src doesn't exist, it would seem */ ++#ifdef AUTO_EXPAND ++ srcdir = (stat2bf((u_int) st.st_mode , src) == BF_DIR); ++#else + srcdir = (stat2bf((u_int) st.st_mode) == BF_DIR); ++#endif + + /* see if destination exists */ ++ + if (stat(dst, &st)==0) { ++ if (overwrite==OWRT_NEVER) return -1; ++#ifdef AUTO_EXPAND ++ dstdir = (stat2bf((u_int) st.st_mode , dst) == BF_DIR); ++#else dstdir = (stat2bf((u_int) st.st_mode) == BF_DIR); ++#endif if (overwrite==OWRT_ASK) { - sprintf(buf, "%s '%s' exists.\n\nOverwrite?", -+ sprintf(buf, "%s '%s' exists.\n\nOverwrite?", ++ snprintf(buf, sizeof(buf), "%s '%s' exists.\n\nOverwrite?", dstdir ? "Directory" : "File", dst); - i = PopUp(buf, owbuts, 4); +- i = PopUp(buf, owbuts, 4); +- +- if (i==1) overwrite = OWRT_NOASK; +- else if (i==2) return -1; +- else if (i==3) { overwrite = OWRT_CANCEL; return 1; } ++ switch (PopUp(buf, owbuts, COUNT(owbuts))) { ++ case 1: overwrite = OWRT_ALWAYS; break; ++ case 2: return -1; ++ case 3: overwrite = OWRT_NEVER; return -1; ++ case 4: overwrite = OWRT_CANCEL; return 1; ++ } + } -@@ -4848,7 +4847,7 @@ + if (dstdir) { + #ifndef VMS /* we don't delete directories in VMS */ +- sprintf(buf, "rm -rf %s", dst); +- if (system(buf)) { /* okay, so it's cheating... */ ++ if (recursive_remove(dst)) { /* okay, so it's cheating... */ + SetISTR(ISTR_WARNING, "Unable to remove directory %s", dst); + return 1; + } +@@ -4848,7 +5480,7 @@ } } @@ -8598,7 +14698,19 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if (!rename(src, dst)) return 0; /* Ok */ if (errno != EXDEV) return 1; /* failure, of some sort */ -@@ -4896,7 +4895,7 @@ +@@ -4859,9 +5491,8 @@ + if (i == 0) { /* copied okay, kill the original */ + if (srcdir) { + #ifndef VMS /* we don't delete directories in VMS */ +- sprintf(buf, "rm -rf %s", src); +- if (system(buf)) { /* okay, so it's cheating... */ +- SetISTR(ISTR_WARNING, "Unable to remove directory %s", dst); ++ if (recursive_remove(src)) { /* okay, so it's cheating... */ ++ SetISTR(ISTR_WARNING, "Unable to remove directory %s", src); + return 1; + } + #endif /* VMS */ +@@ -4896,7 +5527,7 @@ /* possible cases: source is either a file or a directory, or doesn't exist, destination is either a file, a directory, or doesn't exist. @@ -8607,7 +14719,73 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if source is a file: if dest is a file, popup 'overwriting' question, delete file if ok if dest is a dir, popup 'overwriting dir' question, delete dir if ok -@@ -4957,7 +4956,7 @@ +@@ -4907,38 +5538,51 @@ + fall through: if dest doesn't exist, copy the directory, recurs */ + + +- int i, dstExists, srcdir, dstdir; +- struct stat srcSt, dstSt; +- char buf[1024]; +- static char *owdiff[3] = { "\nOk", "nNo", "\033Cancel" }; +- static char *owsame[4] = { "\nOk", "dDon't Ask", "nNo", "\033Cancel" }; ++ int dstExists, srcdir, dstdir; ++ struct stat srcSt, dstSt; ++ char buf[1024]; ++ static const char *owdiff[] = { "\nOk", "nNo", "\033Cancel" }; ++ static const char *owsame[] = { "\nOk", "aAlways", "nNo", "NNever", "\033Cancel" }; + + if (DEBUG) fprintf(stderr,"copyFile %s %s\n", src, dst); + ++#ifdef AUTO_EXPAND ++ Dirtosubst(src); ++#endif ++ + if (stat(src,&srcSt)) return 0; /* source doesn't exist, it would seem */ + + dstExists = (stat(dst, &dstSt)==0); + + if (dstExists) { /* ask about overwriting... */ +- srcdir = (stat2bf((u_int) srcSt.st_mode) == BF_DIR); +- dstdir = (stat2bf((u_int) dstSt.st_mode) == BF_DIR); ++#ifdef AUTO_EXPAND ++ srcdir = (stat2bf((u_int) srcSt.st_mode , src) == BF_DIR); ++ dstdir = (stat2bf((u_int) dstSt.st_mode , dst) == BF_DIR); ++#else ++ srcdir = (stat2bf((u_int) srcSt.st_mode) == BF_DIR); ++ dstdir = (stat2bf((u_int) dstSt.st_mode) == BF_DIR); ++#endif + + sprintf(buf, "%s '%s' already exists. Replace it with %s '%s'?", + (dstdir) ? "Directory" : "File", dst, + (srcdir) ? "contents of directory" : "file", src); + + if (srcdir == dstdir) { ++ if (overwrite==OWRT_NEVER) return -1; + if (overwrite==OWRT_ASK) { +- i = PopUp(buf, owsame, 4); +- if (i==1) overwrite = OWRT_NOASK; +- if (i==2) return -1; +- else if (i==3) { overwrite = OWRT_CANCEL; return 1; } ++ switch (PopUp(buf, owsame, COUNT(owsame))) { ++ case 1: overwrite = OWRT_ALWAYS; break; ++ case 2: return -1; ++ case 3: overwrite = OWRT_NEVER; return -1; ++ case 4: overwrite = OWRT_CANCEL; return 1; ++ } + } + } + else { /* one's a dir, the other's a file. *ALWAYS* ask! */ +- i = PopUp(buf, owdiff, 3); +- if (i==1) return -1; +- else if (i==2) { overwrite = OWRT_CANCEL; return 1; } ++ switch (PopUp(buf, owdiff, COUNT(owdiff))) { ++ case 1: return -1; ++ case 2: overwrite = OWRT_CANCEL; return 1; ++ } + } + + +@@ -4957,7 +5601,7 @@ /* destination doesn't exist no more, if it ever did... */ userMask = umask(0); /* grab the umask */ umask((mode_t) userMask); /* put it back... */ @@ -8616,7 +14794,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcpy(cpSrcPath, src); strcpy(cpDstPath, dst); -@@ -5017,7 +5016,7 @@ +@@ -5017,7 +5661,7 @@ called recursively by cp_dir, there are *no* guarantees that either file exists or not */ @@ -8625,16 +14803,31 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c struct stat srcSt, dstSt; if (stat(cpSrcPath, &srcSt)) { /* src doesn't exist, usefully... */ -@@ -5037,7 +5036,7 @@ +@@ -5036,8 +5680,11 @@ + havedst = 1; } - +- - switch(stat2bf((u_int) srcSt.st_mode)) { ++#ifdef AUTO_EXPAND ++ switch(stat2bf((u_int) srcSt.st_mode , cpDstPath)) { ++#else + switch(stat2bf((u_int) srcSt.st_mode)) { ++#endif /* determine how to copy, by filetype */ /* NOTE: There is no S_IFLNK case here, since we're using 'stat()' and -@@ -5059,12 +5058,12 @@ +@@ -5053,18 +5700,22 @@ + } + } + else { ++#ifdef AUTO_EXPAND ++ if (stat2bf((u_int) dstSt.st_mode , cpDstPath) != BF_DIR) { ++#else + if (stat2bf((u_int) dstSt.st_mode) != BF_DIR) { ++#endif + SetISTR(ISTR_WARNING,"%s: not a directory", cpDstPath); + copyerr++; return; } } @@ -8650,7 +14843,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c case BF_CHR: case BF_BLK: cp_special(&srcSt, havedst); break; -@@ -5089,12 +5088,12 @@ +@@ -5089,12 +5740,12 @@ { int i, dirlen, oldsrclen, olddstlen, longpath; char **names, *name; @@ -8665,7 +14858,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c cpSrcPath, cpDstPath); longpath = 0; -@@ -5110,9 +5109,9 @@ +@@ -5110,9 +5761,9 @@ for (i=0; i<dirlen && overwrite!=OWRT_CANCEL; i++) { name = names[i]; @@ -8677,13 +14870,19 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c /* add name to src and dst paths */ if ((strlen(name) + oldsrclen >= (MAXPATHLEN-3)) || (strlen(name) + olddstlen >= (MAXPATHLEN-3))) { -@@ -5130,12 +5129,12 @@ +@@ -5130,12 +5781,17 @@ cpSrcPath[oldsrclen] = '\0'; goto done; } - +- if (stat2bf((u_int) srcSt.st_mode) == BF_DIR) { + - if (stat2bf((u_int) srcSt.st_mode) == BF_DIR) { ++#ifdef AUTO_EXPAND ++ if (stat2bf((u_int) srcSt.st_mode , cpSrcPath) == BF_DIR) ++#else ++ if (stat2bf((u_int) srcSt.st_mode) == BF_DIR) ++#endif ++ { cpSrcPath[oldsrclen] = '\0'; continue; /* don't remove from list, just skip */ } @@ -8692,7 +14891,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c strcat(cpDstPath, "/"); strcat(cpDstPath, name); cp(); /* RECURSE */ -@@ -5169,7 +5168,7 @@ +@@ -5169,7 +5825,7 @@ strcat(cpDstPath, name); cp(); /* RECURSE */ @@ -8701,20 +14900,44 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c cpSrcPath[oldsrclen] = '\0'; cpDstPath[olddstlen] = '\0'; } -@@ -5191,10 +5190,10 @@ +@@ -5190,11 +5846,11 @@ + int exists; /*****************************/ { - register int srcFd, dstFd, rcount, wcount, i; +- register int srcFd, dstFd, rcount, wcount, i; - char str[512], buf[8192]; -+ char buf[8192]; - static char *owbuts[4] = { "\nOk", "dDon't Ask", "nNo", "\033Cancel" }; +- static char *owbuts[4] = { "\nOk", "dDon't Ask", "nNo", "\033Cancel" }; ++ register int srcFd, dstFd, rcount, wcount; ++ char buf[8192]; ++ static const char *owbuts[] = { "\nOk", "aAlways", "nNo", "NNever", "\033Cancel" }; - if (DEBUG) fprintf(stderr,"cp_file: src='%s', dst='%s'\n", + if (DEBUG) fprintf(stderr,"cp_file: src='%s', dst='%s'\n", cpSrcPath, cpDstPath); if ((srcFd = open(cpSrcPath, O_RDONLY, 0)) == -1) { -@@ -5255,7 +5254,7 @@ +@@ -5204,13 +5860,15 @@ + } + + if (exists) { ++ if (overwrite==OWRT_NEVER) return; + if (overwrite==OWRT_ASK) { + sprintf(buf, "File '%s' exists.\n\nOverwrite?", cpDstPath); +- i = PopUp(buf, owbuts, 4); +- +- if (i==1) overwrite = OWRT_NOASK; +- else if (i==2) return; +- else if (i==3) { overwrite = OWRT_CANCEL; return; } ++ switch (PopUp(buf, owbuts, 4)) { ++ case 1: overwrite = OWRT_ALWAYS; break; ++ case 2: return; ++ case 3: overwrite = OWRT_NEVER; return; ++ case 4: overwrite = OWRT_CANCEL; return; ++ } + } + dstFd = open(cpDstPath, O_WRONLY|O_TRUNC, 0); + } +@@ -5255,7 +5913,7 @@ int exists; /*********************************/ { @@ -8723,7 +14946,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c cpSrcPath, cpDstPath); if (exists && unlink(cpDstPath)) { -@@ -5281,7 +5280,7 @@ +@@ -5281,7 +5939,7 @@ int exists; /*********************************/ { @@ -8732,22 +14955,38 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c cpSrcPath, cpDstPath); #ifdef S_IFIFO -@@ -5302,12 +5301,12 @@ +@@ -5302,12 +5960,18 @@ - + /*********************************/ ++#ifdef AUTO_EXPAND ++static int stat2bf(uistmode, path) ++ u_int uistmode; ++ char *path; ++#else static int stat2bf(uistmode) u_int uistmode; ++#endif { - /* given the 'st.st_mode' field from a successful stat(), returns + /* given the 'st.st_mode' field from a successful stat(), returns BF_FILE, BF_DIR, BF_BLK, BF_CHR, BF_FIFO, or BF_SOCK. Does *NOT* return BF_EXE */ -@@ -5357,8 +5356,8 @@ +@@ -5319,6 +5983,9 @@ + else if (S_ISBLK(stmode)) rv = BF_BLK; + else if (S_ISFIFO(stmode)) rv = BF_FIFO; + else if (S_ISSOCK(stmode)) rv = BF_SOCK; ++#ifdef AUTO_EXPAND ++ else if (Isarchive(path)) rv = BF_DIR; ++#endif + else rv = BF_FILE; + + return rv; +@@ -5357,8 +6024,8 @@ static int selmatch1(name, arg) char *name, *arg; { @@ -8758,7 +14997,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c including zero. */ char *sp, *oldnp; -@@ -5379,7 +5378,7 @@ +@@ -5379,7 +6046,7 @@ while (*name) name++; while (*arg ) arg++; name--; arg--; @@ -8767,7 +15006,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c while (*arg != '*') { if (*arg != *name || name<oldnp) return 0; arg--; name--; -@@ -5388,7 +5387,7 @@ +@@ -5388,7 +6055,7 @@ } else { /* there are more '*'s in arg... */ @@ -8776,7 +15015,7 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c if the '*'s are next to each other, just throw away the first one */ arg++; /* points to char after first '*' */ -@@ -5410,7 +5409,7 @@ +@@ -5410,7 +6077,7 @@ arg = sp+1; } } @@ -8785,9 +15024,108 @@ diff -ruN xv-3.10a/xvbrowse.c xv-3.10a-bugfixes/xvbrowse.c } if (!*arg && !*name) return 1; -diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c +@@ -5419,4 +6086,98 @@ + } + + ++static IVIS *icon_vis_list = NULL; ++ ++/***************************************************************/ ++static void recIconVisible(name, icon) ++ char *name; ++ int icon; ++{ ++ IVIS *ptr, *prev = NULL; ++ ++ for (ptr = icon_vis_list; ptr; prev = ptr, ptr = ptr->next) { ++ if (!strcmp(ptr->name, name)) { ++ ptr->icon = icon; ++ return; ++ } ++ } ++ ++ ptr = calloc(sizeof(IVIS), 1); ++ if (!ptr) ++ return; + ++ ptr->name = strdup(name); ++ ++ if (!ptr->name) { ++ free(ptr); ++ return; ++ } ++ ++ if (!prev) { ++ icon_vis_list = ptr; ++ } else { ++ prev->next = ptr; ++ } ++ ++ ptr->next = NULL; ++ ptr->icon = icon; ++} ++ ++/***************************************************************/ ++static void restIconVisible(br) ++ BROWINFO *br; ++{ ++ IVIS *ptr; ++ ++ for (ptr = icon_vis_list; ptr; ptr = ptr->next) { ++ if (!strcmp(ptr->name, br->path)) { ++ if (ptr->icon >= 0) { ++ makeIconVisible(br, ptr->icon); ++ updateSel(br, ptr->icon, 0, 0); ++ } ++ return; ++ } ++ } ++} ++ ++ ++/*********************************/ ++static void clipChanges(br) ++ BROWINFO *br; ++{ ++ /* called whenever schnauzer activity should place file names in ++ the X11 clipboard, or change what it put there. ++ ++ Implementation is simple because the UI is non-standard ++ (i.e., not like xterm(1)). The clipboard command causes the ++ current browser to dump all its currently selected files' ++ (if any) names to the clipboard, space-separated. ++ No effort is made to shell-escape blanks and other 'odd' ++ characters in the names. */ ++ ++ char buf[4000]; /* too much or too little, whatever... */ ++ int n; ++ int i; ++ ++ n = 0; ++ strcpy(buf, ""); ++ ++ for (i=0; i<br->bfLen; i++) { ++ if(br->bfList[i].lit == 1) { ++ int m; ++ ++ m = strlen(br->bfList[i].name) + 1; ++ ++ if(n+m+1 >= sizeof(buf)) return; /* names probably won't fit in buf, abort */ ++ strcat(buf, br->bfList[i].name); ++ strcat(buf, " "); ++ n += m; ++ } ++ } ++ ++ if(n) { ++ buf[n-1] = 0; /* trim last space */ ++ ++ NewCutBuffer(buf); ++ } ++} +diff -ru xv-3.10a/xvbutt.c xv-3.10a-enhancements/xvbutt.c --- xv-3.10a/xvbutt.c 1995-01-03 13:19:51.000000000 -0800 -+++ xv-3.10a-bugfixes/xvbutt.c 2004-05-16 18:01:29.000000000 -0700 ++++ xv-3.10a-enhancements/xvbutt.c 2007-04-15 20:59:15.000000000 -0700 @@ -1,4 +1,4 @@ -/* +/* @@ -8812,6 +15150,15 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c * MBSelect() - similar to RBSelect() ... * MBClick() - returns true if given MB was clicked on * MBTrack() - tracks MBUTT after click, until release +@@ -76,7 +76,7 @@ + Window win; + int x,y; + unsigned int w,h; +- char *str; ++ const char *str; + unsigned long fg,bg,hi,lo; + { + bp->win = win; @@ -116,7 +116,7 @@ void BTRedraw(bp) BUTT *bp; @@ -8889,7 +15236,13 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c { bp->lit = 0; BTRedraw(bp); XFlush(theDisp); } return(rval); -@@ -295,13 +295,13 @@ +@@ -290,18 +290,18 @@ + RBUTT *rblist; + Window win; + int x,y; +- char *str; ++ const char *str; + unsigned long fg,bg,hi,lo; { /* mallocs an RBUTT, fills in the fields, and appends it to rblist if rblist is NULL, this is the first rb in the list. It will @@ -9055,6 +15408,15 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c if (lit && !PTINRECT(x, y, rb->x, rb->y, RBSIZE, RBSIZE)) { lit=0; drawRB(rb, lit); +@@ -671,7 +671,7 @@ + CBUTT *cb; + Window win; + int x,y; +- char *str; ++ const char *str; + unsigned long fg,bg,hi,lo; + { + /* fill in the fields of the structure */ @@ -690,14 +690,14 @@ do so. We'll be needing them, y'see... */ @@ -9156,7 +15518,23 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c /******************* MBUTT ROUTINES ************************/ -@@ -851,7 +850,7 @@ +@@ -838,20 +837,20 @@ + + + /***********************************************/ +-void MBCreate(mb, win, x,y,w,h, str, list, nlist, fg, bg, hi, lo) ++void MBCreate(mb, win, x, y, w, h, title, list, nlist, fg, bg, hi, lo) + MBUTT *mb; + Window win; + int x,y; + unsigned int w,h; +- char *str; +- char **list; ++ const char *title; ++ const char * const *list; + int nlist; + unsigned long fg,bg,hi,lo; + { XSetWindowAttributes xswa; unsigned long xswamask; int i; @@ -9165,6 +15543,15 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c if (!mbpixmade) { mbchk = XCreatePixmapFromBitmapData(theDisp, rootW, (char *) mb_chk_bits, mb_chk_width, mb_chk_height, fg, bg, dispDEEP); +@@ -865,7 +864,7 @@ + mb->y = y; + mb->w = w; + mb->h = h; +- mb->title = str; ++ mb->title = title; + mb->active = 1; + mb->list = list; + mb->nlist = nlist; @@ -889,7 +888,7 @@ xswa.save_under = True; xswamask = CWBackPixel | CWBorderPixel | CWSaveUnder; @@ -9203,7 +15590,7 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c XSetForeground(theDisp, theGC, mb->bg); XFillRectangle(theDisp, mb->win, theGC, x+1, y+1, w-1, h-1); -@@ -940,7 +939,7 @@ +@@ -940,12 +939,14 @@ XSetBackground(theDisp, theGC, mb->bg); XCopyPlane(theDisp, mb->pix, mb->win, theGC, 0,0, (u_int) mb->pw, (u_int) mb->ph, x1,y1, 1L); @@ -9212,7 +15599,24 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c DimRect(mb->win, x1,y1, (u_int) mb->pw, (u_int) mb->ph, mb->bg); } -@@ -997,14 +996,14 @@ + else { /* draw string centered in butt */ +- char *str, stbuf[256]; ++ const char *str; ++ char *tmp; ++ char stbuf[256]; + + if (mb->title) str = mb->title; + else { /* find first checked item, and show that as the title */ +@@ -961,7 +962,7 @@ + + /* truncate at TAB, if any */ + strcpy(stbuf, str); +- if ((str = (char *) index(stbuf, '\t')) != NULL) *str = '\0'; ++ if ((tmp = (char *) index(stbuf, '\t')) != NULL) *tmp = '\0'; + str = stbuf; + + x1 = CENTERX(mfinfo, x + w/2, str); +@@ -997,14 +998,14 @@ MBUTT *mb; { /* returns index of first checked selection, or '-1' if nothing selected */ @@ -9229,7 +15633,7 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c return -1; } -@@ -1017,13 +1016,13 @@ +@@ -1017,13 +1018,13 @@ /* makes entry #n the selected entry (ie, the only one with a check mark) Does all redrawing. Does nothing if entry #n already selected. Don't let it select 'dim' entries */ @@ -9246,7 +15650,7 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c for (i=0; i<MAXMBLEN; i++) mb->flags[i] = 0; mb->flags[n] = 1; -@@ -1083,7 +1082,7 @@ +@@ -1083,7 +1084,7 @@ } } mwide += 8; /* extra room at edges */ @@ -9255,7 +15659,7 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c /* make wider if any checked menu items */ for (i=0; i<mb->nlist && !mb->flags[i]; i++); hascheck = (i<mb->nlist || mb->hascheck); -@@ -1091,7 +1090,7 @@ +@@ -1091,7 +1092,7 @@ if (hascheck && mb->title) mwide += 8; if (mwide < (mb->w+1)) mwide = mb->w+1; /* at least as wide as button */ @@ -9264,7 +15668,14 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c mhigh = mb->nlist * LINEHIGH + 2 + extratop; mx = mb->x-1; my = mb->y - 1; -@@ -1144,10 +1143,10 @@ +@@ -1138,16 +1139,17 @@ + y = ASCENT + SPACING + extratop; + for (i=0; i<mb->nlist; i++) { + char txtstr[256], *tabstr; ++ + strcpy(txtstr, mb->list[i]); + if ((tabstr = (char *) index(txtstr, '\t'))) { + *tabstr = '\0'; tabstr++; } if (mb->flags[i]) { @@ -9277,7 +15688,7 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c if (!strcmp(mb->list[i], MBSEP)) { mb->dim[i] = 1; /* don't select this one */ if (ctrlColor) { -@@ -1161,15 +1160,15 @@ +@@ -1161,15 +1163,15 @@ XDrawLine(theDisp,win,theGC,4,y-(ASCENT/2)+1, mwide-5, y-(ASCENT/2)+1); XSetForeground(theDisp, theGC, mb->fg); } @@ -9296,9 +15707,9 @@ diff -ruN xv-3.10a/xvbutt.c xv-3.10a-bugfixes/xvbutt.c DimRect(win, x, y-ASCENT, (u_int) mwide, (u_int) CHIGH, mb->bg); XSetForeground(theDisp, theGC, mb->fg); } -diff -ruN xv-3.10a/xvcolor.c xv-3.10a-bugfixes/xvcolor.c +diff -ru xv-3.10a/xvcolor.c xv-3.10a-enhancements/xvcolor.c --- xv-3.10a/xvcolor.c 1995-01-06 11:29:23.000000000 -0800 -+++ xv-3.10a-bugfixes/xvcolor.c 2004-05-16 18:01:37.000000000 -0700 ++++ xv-3.10a-enhancements/xvcolor.c 2007-05-12 13:55:36.000000000 -0700 @@ -52,7 +52,7 @@ int pwide, phigh, *pnumcols; { @@ -9637,7 +16048,7 @@ diff -ruN xv-3.10a/xvcolor.c xv-3.10a-bugfixes/xvcolor.c XSetWindowColormap(theDisp,gamW, LocalCmap); cmap = LocalCmap; -@@ -608,7 +608,7 @@ +@@ -608,12 +608,12 @@ } else { @@ -9646,6 +16057,13 @@ diff -ruN xv-3.10a/xvcolor.c xv-3.10a-bugfixes/xvcolor.c colors into closest allocated desired colors */ if (nfcols==0 && !LocalCmap) { +- char tstr[128], *tmp, +- *foo = "No r/w cells available. Using r/o color."; ++ char tstr[128], *tmp; ++ const char *foo = "No r/w cells available. Using r/o color."; + + tmp = GetISTR(ISTR_WARNING); + if (strlen(tmp) > (size_t) 0) sprintf(tstr, "%s %s", tmp, foo); @@ -623,7 +623,7 @@ allocROColors(); return; @@ -10108,9 +16526,9 @@ diff -ruN xv-3.10a/xvcolor.c xv-3.10a-bugfixes/xvcolor.c if (oldmode == CM_STDCMAP && cmode != CM_STDCMAP && epicMode != EM_RAW) { /* just left STDCMAP mode. Switch to using 'RAW' */ epicMode = EM_RAW; -diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c +diff -ru xv-3.10a/xvctrl.c xv-3.10a-enhancements/xvctrl.c --- xv-3.10a/xvctrl.c 1994-12-22 14:34:41.000000000 -0800 -+++ xv-3.10a-bugfixes/xvctrl.c 2004-05-23 11:56:37.000000000 -0700 ++++ xv-3.10a-enhancements/xvctrl.c 2007-05-13 14:11:33.000000000 -0700 @@ -1,4 +1,4 @@ -/* +/* @@ -10138,27 +16556,154 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c #define CTRLWIDE 440 /* (fixed) size of control window */ #define CTRLHIGH 348 /* 379 */ -@@ -80,7 +83,7 @@ +@@ -80,73 +83,74 @@ in xv.h */ -static char *dispMList[] = { "Raw\tr", -+static char *dispMList[] = { "Raw\tr", - "Dithered\td", - "Smooth\ts", - MBSEP, -@@ -91,7 +94,7 @@ - "Use Own Colormap", - "Use Std. Colormap" }; - +- "Dithered\td", +- "Smooth\ts", +- MBSEP, +- "Read/Write Colors", +- MBSEP, +- "Normal Colors", +- "Perfect Colors", +- "Use Own Colormap", +- "Use Std. Colormap" }; +- -static char *rootMList[] = { "Window", -+static char *rootMList[] = { "Window", - "Root: tiled", - "Root: integer tiled", - "Root: mirrored", -@@ -159,12 +162,12 @@ +- "Root: tiled", +- "Root: integer tiled", +- "Root: mirrored", +- "Root: integer mirrored", +- "Root: center tiled", +- "Root: centered", +- "Root: centered, warp", +- "Root: centered, brick", +- "Root: symmetrical tiled", +- "Root: symmetrical mirrored" }; +- +-static char *conv24MList[] = { "8-bit mode\t\2448", +- "24-bit mode\t\2448", +- MBSEP, +- "Lock current mode", +- MBSEP, +- "Quick 24->8", +- "Slow 24->8", +- "Best 24->8" }; +- +-static char *algMList[] = { "Undo All\t\244u", +- MBSEP, +- "Blur...\t\244b", +- "Sharpen...\t\244s", +- "Edge Detect\t\244e", +- "Emboss\t\244m", +- "Oil Painting\t\244o", +- "Blend\t\244B", +- "Copy Rotate...\t\244t", +- "Clear Rotate...\t\244T", +- "Pixelize...\t\244p", +- "Spread...\t\244S", +- "DeSpeckle...\t\244k"}; +- +-static char *sizeMList[] = { "Normal\tn", +- "Max Size\tm", +- "Maxpect\tM", +- "Double Size\t>", +- "Half Size\t<", +- "10% Larger\t.", +- "10% Smaller\t,", +- MBSEP, +- "Set Size\tS", +- "Re-Aspect\ta", +- "4x3\t4", +- "Int. Expand\tI" }; +- +-static char *windowMList[] = { "Visual Schnauzer\t^v", +- "Color Editor\te", +- "Image Info\ti", +- "Image Comments\t^c", +- "Text View\t^t", +- MBSEP, +- "About XV\t^a", +- "XV Keyboard Help"}; ++static const char *dispMList[] = { "Raw\tr", ++ "Dithered\td", ++ "Smooth\ts", ++ MBSEP, ++ "Read/Write Colors", ++ MBSEP, ++ "Normal Colors", ++ "Perfect Colors", ++ "Use Own Colormap", ++ "Use Std. Colormap" }; ++ ++static const char *rootMList[] = { "Window", ++ "Root: tiled", ++ "Root: integer tiled", ++ "Root: mirrored", ++ "Root: integer mirrored", ++ "Root: center tiled", ++ "Root: centered", ++ "Root: centered, warp", ++ "Root: centered, brick", ++ "Root: symmetrical tiled", ++ "Root: symmetrical mirrored", ++ "Root: upper left corner" }; ++ ++static const char *conv24MList[] = { "8-bit mode\t\2448", ++ "24-bit mode\t\2448", ++ MBSEP, ++ "Lock current mode", ++ MBSEP, ++ "Quick 24->8", ++ "Slow 24->8", ++ "Best 24->8" }; ++ ++static const char *algMList[] = { "Undo All\t\244u", ++ MBSEP, ++ "Blur...\t\244b", ++ "Sharpen...\t\244s", ++ "Edge Detect\t\244e", ++ "Emboss\t\244m", ++ "Oil Painting\t\244o", ++ "Blend\t\244B", ++ "Copy Rotate...\t\244t", ++ "Clear Rotate...\t\244T", ++ "Pixelize...\t\244p", ++ "Spread...\t\244S", ++ "DeSpeckle...\t\244k"}; ++ ++static const char *sizeMList[] = { "Normal\tn", ++ "Max Size\tm", ++ "Maxpect\tM", ++ "Double Size\t>", ++ "Half Size\t<", ++ "10% Larger\t.", ++ "10% Smaller\t,", ++ MBSEP, ++ "Set Size\tS", ++ "Re-Aspect\ta", ++ "4x3\t4", ++ "Int. Expand\tI" }; ++ ++static const char *windowMList[] = { "Visual Schnauzer\t^v", ++ "Color Editor\te", ++ "Image Info\ti", ++ "Image Comments\t^c", ++ "Text View\t^t", ++ MBSEP, ++ "About XV\t^a", ++ "XV Keyboard Help"}; + + + +@@ -157,14 +161,14 @@ + + /***************************************************/ void CreateCtrl(geom) - char *geom; +- char *geom; ++ const char *geom; { - int i, listh, topskip; + int listh, topskip; @@ -10171,7 +16716,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c CTRLWIDE, CTRLHIGH, infofg, infobg, 0); if (!ctrlW) FatalError("can't create controls window!"); -@@ -205,10 +208,10 @@ +@@ -205,10 +209,10 @@ oicon2Pix = MakePix1(ctrlW, oicon2_bits, oicon2_width, oicon2_height); if (!grayTile || !dimStip || !fifoPix || !chrPix || !dirPix || @@ -10184,7 +16729,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c FatalError("unable to create all pixmaps in CreateCtrl()\n"); -@@ -226,7 +229,7 @@ +@@ -226,7 +230,7 @@ XFreePixmap(theDisp, oicon1Pix); XFreePixmap(theDisp, oicon2Pix); @@ -10193,7 +16738,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c if (ctrlColor) XSetWindowBackground(theDisp, ctrlW, locol); else XSetWindowBackgroundPixmap(theDisp, ctrlW, grayTile); -@@ -234,7 +237,7 @@ +@@ -234,7 +238,7 @@ listh = LINEHIGH * NLINES; LSCreate(&nList, ctrlW, 5, 52, (CTRLWIDE-BUTTW-18), @@ -10202,7 +16747,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c infofg, infobg, hicol, locol, RedrawNList, 0, 0); nList.selected = 0; /* default to first name selected */ -@@ -245,8 +248,8 @@ +@@ -245,8 +249,8 @@ topskip = nList.y; skip = ((double) (nList.h - (CHIGH+5))) / 6.0; @@ -10213,7 +16758,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c topskip = nList.y + (nList.h - (6*skip + (CHIGH+5))) / 2; } -@@ -258,7 +261,7 @@ +@@ -258,7 +262,7 @@ #define R_BY3 (topskip + (int)(3*skip)) #define R_BY4 (topskip + (int)(4*skip)) #define R_BY5 (topskip + (int)(5*skip)) @@ -10222,7 +16767,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c BTCreate(&but[BNEXT], ctrlW, R_BX0, R_BY0, R_BW1, SBUTTH, "Next", BCLS); BTCreate(&but[BPREV], ctrlW, R_BX0, R_BY1, R_BW1, SBUTTH, "Prev", BCLS); BTCreate(&but[BLOAD], ctrlW, R_BX0, R_BY2, R_BW1, SBUTTH, "Load", BCLS); -@@ -309,7 +312,7 @@ +@@ -309,7 +313,7 @@ BTCreate(&but[BABOUT], ctrlW,BX4, BY1,BUTTW,BUTTH,"About XV",BCLS); BTCreate(&but[BQUIT], ctrlW,BX5, BY1,BUTTW,BUTTH,"Quit", BCLS); @@ -10231,7 +16776,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c "", BCLS); SetButtPix(&but[BCOPY], copyPix, copy_width, copy_height); -@@ -329,7 +332,7 @@ +@@ -329,7 +333,7 @@ if (ctrlColor) { SetButtPix(&but[BXV], oiconPix, oicon1_width, oicon1_height); but[BXV].colorpix = 1; @@ -10240,7 +16785,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c else SetButtPix(&but[BXV], iconPix, icon_width, icon_height); #else SetButtPix(&but[BXV], uiconPix, uicon_width, uicon_height); -@@ -338,21 +341,21 @@ +@@ -338,21 +342,21 @@ XMapSubwindows(theDisp, ctrlW); @@ -10269,7 +16814,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c "Image Size", sizeMList, SZMB_MAX, BCLS); -@@ -395,7 +398,7 @@ +@@ -395,7 +399,7 @@ byte *bits; int w,h; { @@ -10278,7 +16823,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c (u_int) w, (u_int) h, 1L,0L,1); } -@@ -404,7 +407,7 @@ +@@ -404,7 +408,7 @@ void CtrlBox(vis) int vis; { @@ -10287,7 +16832,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c else XUnmapWindow(theDisp, ctrlW); ctrlUp = vis; -@@ -416,7 +419,6 @@ +@@ -416,7 +420,6 @@ int x,y,w,h; { int i; @@ -10295,7 +16840,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c RANGE(w, 0, CTRLWIDE); RANGE(h, 0, CTRLHIGH); -@@ -452,7 +454,7 @@ +@@ -452,7 +455,7 @@ /***************************************************/ void DrawCtrlNumFiles() { @@ -10304,7 +16849,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c char foo[40]; x = but[BNEXT].x; -@@ -463,14 +465,14 @@ +@@ -463,14 +466,14 @@ XSetBackground(theDisp, theGC, infobg); sprintf(foo, "%d file%s", numnames, (numnames==1) ? "" : "s"); @@ -10321,7 +16866,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c R3D_IN, 2, hicol, locol, infobg); XSetForeground(theDisp,theGC,infofg); -@@ -489,7 +491,7 @@ +@@ -489,7 +492,7 @@ st1 = GetISTR(ISTR_WARNING); XSetForeground(theDisp, theGC, infobg); @@ -10330,7 +16875,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c CTRLWIDE, (u_int)((CHIGH+4)*2+1)); XSetForeground(theDisp, theGC, infofg); -@@ -501,7 +503,7 @@ +@@ -501,7 +504,7 @@ XSetForeground(theDisp, theGC, locol); XDrawLine(theDisp, ctrlW, theGC, 0, y+1, CTRLWIDE, y+1); XDrawLine(theDisp, ctrlW, theGC, 0, y+CHIGH+5, CTRLWIDE, y+CHIGH+5); @@ -10339,7 +16884,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c CTRLWIDE, y+(CHIGH+4)*2+1); } -@@ -542,16 +544,16 @@ +@@ -542,16 +545,16 @@ void ScrollToCurrent(lst) LIST *lst; { @@ -10359,7 +16904,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c lst->selected < lst->scrl.val + lst->nlines-1) LSRedraw(lst, 0); else { halfway = (lst->nlines)/2; /* offset to the halfway pt. of the list */ -@@ -590,7 +592,7 @@ +@@ -590,7 +593,7 @@ lp->win = XCreateSimpleWindow(theDisp,win,x,y,(u_int) w, (u_int) h,1,fg,bg); if (!lp->win) FatalError("can't create list window!"); @@ -10368,7 +16913,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c lp->w = w; lp->h = h; lp->fg = fg; lp->bg = bg; lp->hi = hi; lp->lo = lo; -@@ -603,7 +605,7 @@ +@@ -603,7 +606,7 @@ XSelectInput(theDisp, lp->win, ExposureMask | ButtonPressMask); @@ -10377,7 +16922,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c nstr-nlines, 0, nlines-1, fg, bg, hi, lo, fptr); XMapSubwindows(theDisp, lp->win); -@@ -646,7 +648,7 @@ +@@ -646,7 +649,7 @@ LIST *lp; { /* redraws lists 3d-effect, which can be trounced by drawSel() */ @@ -10386,7 +16931,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c lp->hi, lp->lo, lp->bg); } -@@ -675,43 +677,43 @@ +@@ -675,43 +678,43 @@ else { fg = lp->fg; bg = lp->bg; } XSetForeground(theDisp, theGC, bg); @@ -10439,7 +16984,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c XCopyPlane(theDisp, exePix, lp->win, theGC, 0, 0, i_exe_width, i_exe_height, x0+3, ypos, 1L); -@@ -720,8 +722,8 @@ +@@ -720,8 +723,8 @@ i_reg_width, i_reg_height, x0+3, ypos, 1L); @@ -10450,7 +16995,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c lp->str[j]+1); } } -@@ -735,7 +737,7 @@ +@@ -735,7 +738,7 @@ { int i; @@ -10459,7 +17004,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c drawSel(lp,i); ls3d(lp); } -@@ -762,7 +764,7 @@ +@@ -762,7 +765,7 @@ if (sel >= lp->nstr) sel = lp->selected; /* see if it's a double click */ @@ -10468,7 +17013,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c && (lp->scrl.val + (y-y0)/LINEHIGH) < lp->nstr && !INACTIVE(lp,sel)) { return (sel); -@@ -782,7 +784,7 @@ +@@ -782,7 +785,7 @@ while (XQueryPointer(theDisp,lp->win,&rW,&cW,&rx,&ry,&x,&y,&mask)) { if (!(mask & Button1Mask)) break; /* button released */ @@ -10477,7 +17022,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c if (lp->scrl.val > lp->scrl.min) { lp->selected = lp->scrl.val - 1; SCSetVal(&lp->scrl, lp->scrl.val - 1); -@@ -804,7 +806,7 @@ +@@ -804,7 +807,7 @@ if (sel >= lp->nstr) sel = lp->nstr - 1; if (sel != lp->selected && sel >= lp->scrl.val && @@ -10486,7 +17031,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c /* dragged to another on current page */ oldsel = lp->selected; lp->selected = sel; -@@ -829,17 +831,17 @@ +@@ -829,17 +832,17 @@ else if (key==LS_PAGEDOWN) SCSetVal(&lp->scrl,lp->scrl.val + (lp->nlines-1)); else if (key==LS_HOME) SCSetVal(&lp->scrl,lp->scrl.min); else if (key==LS_END) SCSetVal(&lp->scrl,lp->scrl.max); @@ -10507,7 +17052,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c /* if it's the top line... */ else if (lp->selected == lp->scrl.val) { if (lp->selected > 0) { -@@ -847,7 +849,7 @@ +@@ -847,7 +850,7 @@ SCSetVal(&lp->scrl, lp->selected); } } @@ -10516,7 +17061,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c /* if it's not visible, put it on the bottom line */ else { lp->selected = lp->scrl.val + lp->nlines - 1; -@@ -856,10 +858,10 @@ +@@ -856,10 +859,10 @@ ls3d(lp); } } @@ -10529,7 +17074,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c lp->selected < lp->scrl.val + lp->nlines - 1) { if (lp->selected < lp->nstr-1) { /* then just move it */ -@@ -868,7 +870,7 @@ +@@ -868,7 +871,7 @@ ls3d(lp); } } @@ -10538,7 +17083,7 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c /* if it's the bottom line... */ else if (lp->selected == lp->scrl.val + lp->nlines - 1) { if (lp->selected < lp->nstr-1) { -@@ -876,7 +878,7 @@ +@@ -876,7 +879,7 @@ SCSetVal(&lp->scrl, lp->scrl.val+1); } } @@ -10547,9 +17092,9 @@ diff -ruN xv-3.10a/xvctrl.c xv-3.10a-bugfixes/xvctrl.c /* if it's not visible, put it on the top line */ else { lp->selected = lp->scrl.val; -diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c +diff -ru xv-3.10a/xvcut.c xv-3.10a-enhancements/xvcut.c --- xv-3.10a/xvcut.c 1995-01-13 11:55:48.000000000 -0800 -+++ xv-3.10a-bugfixes/xvcut.c 2004-05-16 18:01:43.000000000 -0700 ++++ xv-3.10a-enhancements/xvcut.c 2007-04-15 15:02:32.000000000 -0700 @@ -15,7 +15,7 @@ * static void clearSelectedArea(); * static void makeClipFName (); @@ -10622,19 +17167,22 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c cy = (sy>=0) ? 0 : ((-sy) * cliph) / sh; cw = (dw * clipw) / sw; ch = (dh * cliph) / sh; -@@ -302,26 +302,26 @@ +@@ -302,27 +302,29 @@ if (picType == PIC8) { int ncc, keep8; char buf[512]; - + if (clipis24) { /* pasting in a 24-bit image that *requires* promotion */ - static char *bnames[] = { "\nOkay", "\033Cancel" }; +- static char *bnames[] = { "\nOkay", "\033Cancel" }; ++ static const char *labels[] = { "\nOkay", "\033Cancel" }; ++ strcpy(buf, "Warning: Pasting this 24-bit image will require "); strcat(buf, "promoting the current image to 24 bits."); - +- if (PopUp(buf, bnames, 2)) goto exit; /* Cancelled */ + - if (PopUp(buf, bnames, 2)) goto exit; /* Cancelled */ ++ if (PopUp(buf, labels, 2)) goto exit; /* Cancelled */ else Change824Mode(PIC24); /* promote pic to 24 bits */ } @@ -10643,17 +17191,21 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c - + if (ncc + numcols > 256) { - static char *bnames[] = { "\nPromote", "8Keep 8-bit", "\033Cancel" }; +- static char *bnames[] = { "\nPromote", "8Keep 8-bit", "\033Cancel" }; ++ static const char *labels[] = { "\nPromote", "8Keep 8-bit", "\033Cancel" }; ++ strcpy(buf,"Warning: The image and the clipboard combine to have "); strcat(buf,"more than 256 unique colors. Promoting the "); strcat(buf,"image to 24 bits is recommended, otherwise the contents "); strcat(buf,"of the clipboard will probably lose some colors."); - +- keep8 = PopUp(buf, bnames, 3); + - keep8 = PopUp(buf, bnames, 3); ++ keep8 = PopUp(buf, labels, 3); if (keep8==2) goto exit; /* Cancel */ else if (keep8==0) Change824Mode(PIC24); /* promote pic to 24 bits */ -@@ -331,8 +331,8 @@ + } +@@ -331,8 +333,8 @@ @@ -10664,7 +17216,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c /* legal possibilities at this point: * pic is PIC24: clip is 8 or 24 * pic is PIC8: clip is 8, or clip is 24 but has 256 or fewer colors -@@ -342,18 +342,18 @@ +@@ -342,18 +344,18 @@ if (picType == PIC8) { int clx, cly, r,g,b,k,mind,close,newcols; @@ -10688,7 +17240,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (!clipis24) { /* copy colormap from clip data into newr,g,b[] */ for (i=0; i<256; i++) { newr[i] = clipcmap[i*3]; -@@ -366,22 +366,22 @@ +@@ -366,22 +368,22 @@ dp = dpic + i*dw; cly = cy + (i * ch) / dh; clp = clippic + (cly*clipw * bperpix); @@ -10715,7 +17267,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c *dp = (byte) (k & 0xff); } } -@@ -401,23 +401,23 @@ +@@ -401,23 +403,23 @@ } } } @@ -10746,7 +17298,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (numcols < 256) { rMap[numcols] = newr[i]; gMap[numcols] = newg[i]; -@@ -429,7 +429,7 @@ +@@ -429,7 +431,7 @@ r = newr[i]; g=newg[i]; b=newb[i]; mind = 256*256 + 256*256 + 256*256; for (j=close=0; j<numcols; j++) { @@ -10755,7 +17307,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c ((gMap[j]-g) * (gMap[j]-g)) + ((bMap[j]-b) * (bMap[j]-b)); if (k<mind) { mind = k; close = j; } -@@ -438,10 +438,10 @@ +@@ -438,10 +440,10 @@ } } } @@ -10769,7 +17321,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c dp = dpic; for (i=dy; i<dy+dh; i++) { pp = pic + (i*pWIDE) + dx; -@@ -451,7 +451,7 @@ +@@ -451,7 +453,7 @@ } } free(dpic); @@ -10778,7 +17330,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (newcols) InstallNewPic(); /* does color reallocation, etc. */ else { GenerateCpic(); -@@ -459,16 +459,16 @@ +@@ -459,16 +461,16 @@ DrawEpic(); } } @@ -10799,7 +17351,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c trr = trg = trb = 0; if (istran) { if (clipis24) { -@@ -482,24 +482,24 @@ +@@ -482,24 +484,24 @@ trb = clipcmap[trval*3+2]; } } @@ -10830,7 +17382,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (!clipis24) { for (i=0; i<256; i++) { rmap[i] = clipcmap[i*3]; -@@ -507,15 +507,15 @@ +@@ -507,15 +509,15 @@ bmap[i] = clipcmap[i*3+2]; } } @@ -10850,7 +17402,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c dp = dpic; for (i=dy; i<dy+dh; i++) { pp = pic + (i*pWIDE + dx) * 3; -@@ -536,11 +536,11 @@ +@@ -536,11 +538,11 @@ pp = pic + ((i+dy)*pWIDE + dx) * 3; cly = cy + (i * ch) / dh; clp = clippic + (cly*clipw * bperpix); @@ -10864,7 +17416,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (clipis24) { if (!istran || cp[0]!=trr || cp[1]!=trg || cp[2]==trb) { pp[0] = *cp++; pp[1] = *cp++; pp[2] = *cp++; -@@ -557,14 +557,14 @@ +@@ -557,14 +559,14 @@ } } @@ -10883,7 +17435,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c SetCursors(-1); } -@@ -577,20 +577,20 @@ +@@ -577,20 +579,20 @@ XColor cfg, cbg; dragcurs = XCreateFontCursor(theDisp, XC_fleur); @@ -10910,7 +17462,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c copy_x_hot, copy_y_hot); if (!cutcurs || !copycurs) FatalError("can't create cut/copy cursors..."); } -@@ -619,7 +619,7 @@ +@@ -619,7 +621,7 @@ if (!CutAllowed()) { XBell(theDisp, 0); return (byte *) NULL; } if (!HaveSelection()) return (byte *) NULL; @@ -10919,7 +17471,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c GetSelRCoords(&x,&y,&w,&h); CropRect2Rect(&x,&y,&w,&h, 0,0,pWIDE,pHIGH); -@@ -663,15 +663,15 @@ +@@ -663,15 +665,15 @@ if (picType == PIC24 && !do24) { /* 24-bit data as 8-bit */ int nc,pr,pg,pb; byte *cm; @@ -10938,7 +17490,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c cm = cimg + CIMG_CMAP; for (k=0; k<nc; k++,cm+=3) { if (pr==cm[0] && pg==cm[1] && pb==cm[2]) break; -@@ -682,12 +682,12 @@ +@@ -682,12 +684,12 @@ cimg[CIMG_CMAP + nc*3 + 1] = pg; cimg[CIMG_CMAP + nc*3 + 2] = pb; } @@ -10953,7 +17505,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c else if (picType == PIC24) { /* 24-bit data as 24-bit */ dp = cimg + CIMG_PIC24; -@@ -705,26 +705,26 @@ +@@ -705,26 +707,26 @@ else if (picType == PIC8) { /* 8-bit selection */ byte *cm = cimg + CIMG_CMAP; for (i=0; i<256; i++) { /* copy colormap */ @@ -10984,7 +17536,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c /********************************************/ static byte *getFromClip() { -@@ -743,14 +743,14 @@ +@@ -743,14 +745,14 @@ clipAtom = XInternAtom(theDisp, CLIPPROP, True); if (clipAtom != None) XDeleteProperty(theDisp, rootW, clipAtom); } @@ -11003,7 +17555,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c (unsigned char **) &data); if (i==Success && actType==XA_STRING && actFormat==8 && nleft>0) { -@@ -763,9 +763,9 @@ +@@ -763,9 +765,9 @@ XFree((void *) data); /* read the rest of the data (len bytes) */ @@ -11016,7 +17568,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c &nleft, (unsigned char **) &data); if (i==Success) { -@@ -791,8 +791,8 @@ +@@ -791,8 +793,8 @@ } } @@ -11027,7 +17579,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c use the file method, instead */ if (!clipfname) makeClipFName(); -@@ -800,7 +800,7 @@ +@@ -800,7 +802,7 @@ fp = fopen(clipfname, "r"); if (!fp) { unlink(clipfname); @@ -11036,7 +17588,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c clipfname, ERRSTR(errno)); ErrPopUp(str,"\nBletch!"); return (byte *) NULL; -@@ -877,19 +877,19 @@ +@@ -877,19 +879,19 @@ clipAtom = XInternAtom(theDisp, CLIPPROP, True); if (clipAtom != None) XDeleteProperty(theDisp, rootW, clipAtom); } @@ -11060,7 +17612,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c /* failed, use file method */ XDeleteProperty(theDisp, rootW, clipAtom); } -@@ -903,7 +903,7 @@ +@@ -903,7 +905,7 @@ fp = fopen(clipfname, "w"); if (!fp) { unlink(clipfname); @@ -11069,7 +17621,16 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c clipfname, ERRSTR(errno)); ErrPopUp(str,"\nBletch!"); return; -@@ -996,7 +996,7 @@ +@@ -964,7 +966,7 @@ + /********************************************/ + static void makeClipFName() + { +- char *homedir; ++ const char *homedir; + + if (clipfname) return; + +@@ -996,7 +998,7 @@ byte *pp; nc = 0; @@ -11078,7 +17639,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c for (i=y; nc<257 && i<y+h; i++) { pp = pic + i*pwide*3 + x*3; for (j=x; nc<257 && j<x+w; j++, pp+=3) { -@@ -1022,7 +1022,7 @@ +@@ -1022,7 +1024,7 @@ */ int i, j, k, nc, r,g,b; @@ -11087,7 +17648,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c byte newr[257], newg[257], newb[257]; if (picType != PIC8) return 0; /* shouldn't happen */ -@@ -1034,7 +1034,7 @@ +@@ -1034,7 +1036,7 @@ pp = newpic + i*w*3 + cx*3; for (j=cx; j<cx+cw; j++) { r = *pp++; g = *pp++; b = *pp++; @@ -11096,7 +17657,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c /* lookup r,g,b in 'pic's colormap and the newcolors colormap */ for (k=0; k<nc && (r!=newr[k] || g!=newg[k] || b!=newb[k]); k++); if (k==nc) { -@@ -1062,11 +1062,11 @@ +@@ -1062,11 +1064,11 @@ /* now see which of the used colors are new */ for (i=0, nc=0; i<256; i++) { if (!coluse[i]) continue; @@ -11112,7 +17673,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c /* lookup r,g,b in pic's colormap */ for (k=0; k<numcols && (r!=rMap[k] || g!=gMap[k] || b!=bMap[k]);k++); if (k==numcols) { /* it's a new color, alright */ -@@ -1075,7 +1075,7 @@ +@@ -1075,7 +1077,7 @@ } } } @@ -11121,7 +17682,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c return nc; } -@@ -1143,7 +1143,7 @@ +@@ -1143,7 +1145,7 @@ /* NOTE: SELECTION IS *NOT* GUARANTEED to be within the bounds of 'pic'. It is only guaranteed to *intersect* pic. */ @@ -11130,7 +17691,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c *wp = selrw; *hp = selrh; } -@@ -1200,7 +1200,7 @@ +@@ -1200,7 +1202,7 @@ if (lastClickButton==Button1 && (ev->time - lastClickTime) < DBLCLKTIME) { lastClickButton=Button3; if (HaveSelection() && PTINRECT(px, py, selrx, selry, selrw, selrh)) { @@ -11139,7 +17700,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c rv = 1; } else { -@@ -1225,7 +1225,7 @@ +@@ -1225,7 +1227,7 @@ else if (ev->button == Button2) { /* do a drag & drop operation */ if (HaveSelection() && PTINRECT(px,py,selrx,selry,selrw,selrh)) { /* clip selection rect to pic */ @@ -11148,7 +17709,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c CropRect2Rect(&selrx, &selry, &selrw, &selrh, 0, 0, pWIDE, pHIGH); if (selrw<1 || selrh<1) rv = 0; -@@ -1253,8 +1253,8 @@ +@@ -1253,8 +1255,8 @@ * holding SHIFT constrains selection to be square, * holding CTRL constrains selection to keep original aspect ratio */ @@ -11159,7 +17720,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c int sex, sey, sex2, sey2, sew, seh, sew2, seh2, hs, h2; int istp, isbt, islf, isrt, isvm, ishm; int cnstsq, cnstasp; -@@ -1272,7 +1272,7 @@ +@@ -1272,7 +1274,7 @@ sew2 = sew/2; seh2 = seh/2; sex2--; sey2--; @@ -11168,7 +17729,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (sew>=35 && seh>=35) hs=7; else if (sew>=20 && seh>=20) hs=5; else if (sew>= 9 && seh>= 9) hs=3; -@@ -1307,7 +1307,7 @@ +@@ -1307,7 +1309,7 @@ /* it's definitely in a handle... track 'til released */ @@ -11177,7 +17738,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c DrawSelection(0); selFilled = 1; selTracking = 1; -@@ -1366,12 +1366,12 @@ +@@ -1366,12 +1368,12 @@ else { chwide=1; newwide = (int) (seh*orgaspect); } } } @@ -11192,7 +17753,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (chhigh) { if (istp) { sey = (sey+seh) - newhigh; } seh = newhigh; -@@ -1380,7 +1380,7 @@ +@@ -1380,7 +1382,7 @@ if (sew<1) sew=1; if (seh<1) seh=1; @@ -11201,7 +17762,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (sex!=selrx || sey!=selry || sew!=selrw || seh!=selrh) { DrawSelection(0); selrx = sex; selry = sey; selrw = sew; selrh = seh; -@@ -1395,14 +1395,14 @@ +@@ -1395,14 +1397,14 @@ Timer(100); } } @@ -11218,7 +17779,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c selry < cYOFF+cHIGH && selry+selrh > cYOFF) EnableSelection(1); return 1; -@@ -1422,7 +1422,7 @@ +@@ -1422,7 +1424,7 @@ * * if 'dragndrop', changes cursor, monitors CTRL status */ @@ -11227,7 +17788,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c int mpx, mpy, offx, offy; int newsx, newsy, orgsx, orgsy, cnstrain, docopy, lastdocopy; Window rW, cW; -@@ -1436,9 +1436,9 @@ +@@ -1436,9 +1438,9 @@ CoordE2P(ev->x, ev->y, &mpx, &mpy); offx = mpx - selrx; offy = mpy - selry; @@ -11239,7 +17800,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c DrawSelection(0); selFilled = 1; selTracking = 1; -@@ -1467,7 +1467,7 @@ +@@ -1467,7 +1469,7 @@ dx = newsx - orgsx; dy = newsy - orgsy; if (abs(dx) > abs(dy)) dy = 0; else if (abs(dy) > abs(dx)) dx = 0; @@ -11248,7 +17809,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c newsx = orgsx + dx; newsy = orgsy + dy; } -@@ -1485,7 +1485,7 @@ +@@ -1485,7 +1487,7 @@ Timer(100); } } @@ -11257,7 +17818,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c EnableSelection(0); selFilled = 0; -@@ -1495,7 +1495,7 @@ +@@ -1495,7 +1497,7 @@ /* only do <whatever> if the selection intersects CPIC */ @@ -11266,7 +17827,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c selry < cYOFF+cHIGH && selry+selrh > cYOFF) { EnableSelection(1); -@@ -1503,10 +1503,10 @@ +@@ -1503,10 +1505,10 @@ if (dragndrop) { int tmpsx, tmpsy; byte *data; @@ -11279,7 +17840,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c data = getSelection(); /* copy old data */ if (data) { if (!docopy) clearSelectedArea(); -@@ -1531,29 +1531,29 @@ +@@ -1531,29 +1533,29 @@ int rx,ry,ox,oy,x,y,active, x1, y1, x2, y2, cnstrain; int i, px,py,px2,py2,pw,ph; unsigned int mask; @@ -11317,7 +17878,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c CoordE2P(x1, y1, &px, &py); CoordE2P(x2, y2, &px2, &py2); if (px>px2) { i=px; px=px2; px2=i; } -@@ -1561,17 +1561,17 @@ +@@ -1561,17 +1563,17 @@ pw = px2-px+1; ph=py2-py+1; /* keep px,py,pw,ph inside 'pic' */ @@ -11338,7 +17899,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (cnstrain) { /* make a square at smaller of w,h */ if (ph>pw) { if (y2<y1) py += (ph-pw); ph=pw; } else if (pw>ph) { if (x2<x1) px += (pw-ph); pw=ph; } -@@ -1579,12 +1579,12 @@ +@@ -1579,12 +1581,12 @@ /* put x,y,w,h -> selr{x,y,w,h} if the rectangle has changed, erase old and draw new */ @@ -11353,7 +17914,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c haveSel = active = (pw>0 && ph>0); if (infoUp) SetSelectionString(); XFlush(theDisp); -@@ -1615,7 +1615,7 @@ +@@ -1615,7 +1617,7 @@ set, pick a new 'color' to invert the selection with */ int x,y,x1,y1,w,h; @@ -11362,7 +17923,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (newcol) selColor = (selColor+1) & 0x7; /* convert selr{x,y,w,h} into epic coords */ -@@ -1650,7 +1650,7 @@ +@@ -1650,7 +1652,7 @@ if (y<0 && y+h>eHIGH && selFilled!=1) XDrawLine(theDisp, mainW, theGC, x, eHIGH/2, x+w, eHIGH/2); @@ -11371,7 +17932,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (selFilled==0 || selFilled == 1) { /* one little kludge: if w or h == eWIDE or eHIGH, make it one smaller */ if (x+w == eWIDE) w--; -@@ -1664,17 +1664,17 @@ +@@ -1664,17 +1666,17 @@ else if (w>=20 && h>=20) { hs=5; h1=4; h2=2; } else if (w>= 9 && h>= 9) { hs=3; h1=2; h2=1; } else hs=h1=h2=0; @@ -11392,7 +17953,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c XFillRectangle(theDisp,mainW,theGC,x+1, y+h-h1, (u_int)h1,(u_int)h1); XFillRectangle(theDisp,mainW,theGC,x+w/2-h2,y+h-h1, -@@ -1683,7 +1683,7 @@ +@@ -1683,7 +1685,7 @@ (u_int)h1,(u_int)h1); } } @@ -11401,7 +17962,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c if (selFilled==1) { XDrawLine(theDisp, mainW, theGC, x+1, y+1, x+w-1, y+h-1); XDrawLine(theDisp, mainW, theGC, x+1, y+h-1, x+w-1, y+1); -@@ -1692,8 +1692,8 @@ +@@ -1692,8 +1694,8 @@ else if (selFilled==2) { XFillRectangle(theDisp, mainW, theGC, x,y,(u_int) w, (u_int) h); } @@ -11412,7 +17973,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c XSetFunction(theDisp,theGC,GXcopy); XSetPlaneMask(theDisp, theGC, AllPlanes); } -@@ -1703,7 +1703,7 @@ +@@ -1703,7 +1705,7 @@ void MoveGrowSelection(dx,dy,dw,dh) int dx,dy,dw,dh; { @@ -11421,7 +17982,7 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c (in pic coords). keeps the selection entirely within 'pic'. (called by 'CropKey()') */ -@@ -1729,7 +1729,7 @@ +@@ -1729,7 +1731,7 @@ } } @@ -11430,9 +17991,9 @@ diff -ruN xv-3.10a/xvcut.c xv-3.10a-bugfixes/xvcut.c /***********************************/ void BlinkSelection(cnt) int cnt; -diff -ruN xv-3.10a/xvdflt.c xv-3.10a-bugfixes/xvdflt.c +diff -ru xv-3.10a/xvdflt.c xv-3.10a-enhancements/xvdflt.c --- xv-3.10a/xvdflt.c 1994-12-22 14:34:42.000000000 -0800 -+++ xv-3.10a-bugfixes/xvdflt.c 2004-05-16 18:01:46.000000000 -0700 ++++ xv-3.10a-enhancements/xvdflt.c 2007-05-12 14:07:36.000000000 -0700 @@ -16,12 +16,12 @@ #include "bits/xv_rev" #include "bits/xv_ver" @@ -11448,6 +18009,15 @@ diff -ruN xv-3.10a/xvdflt.c xv-3.10a-bugfixes/xvdflt.c #endif +@@ -62,7 +62,7 @@ + for (i=0; i<XVDFLT_HIGH; i++) { + nbytes = 0; + while (nbytes < XVDFLT_WIDE) { +- char *sp; ++ const char *sp; + byte *dp; + + j = XVDFLT_WIDE - nbytes; @@ -100,21 +100,21 @@ setcolor(pinfo, 252, 0, 0, 0); /* black background for text */ @@ -11476,7 +18046,19 @@ diff -ruN xv-3.10a/xvdflt.c xv-3.10a-bugfixes/xvdflt.c dfltpic, DWIDE, DHIGH, DWIDE/2 + (i/2) - xv_rev_width/2, 220, 250); strcpy(str,"Press <right> mouse button for menu."); -@@ -169,7 +169,7 @@ +@@ -136,7 +136,11 @@ + pinfo->w = XVDFLT_WIDE; + pinfo->h = XVDFLT_HIGH; + pinfo->type = PIC8; ++#ifdef HAVE_PNG ++ pinfo->frmType = F_PNG; ++#else + pinfo->frmType = F_GIF; ++#endif + pinfo->colType = F_FULLCOLOR; + + pinfo->normw = pinfo->w; +@@ -169,7 +173,7 @@ for (i=k=0; i<DHIGH; i+=xf_left_height) { for (j=0; j<DWIDE; j+=xf_left_width) { k++; @@ -11485,7 +18067,7 @@ diff -ruN xv-3.10a/xvdflt.c xv-3.10a-bugfixes/xvdflt.c xbm2pic((byte *) xf_left_bits, xf_left_width, xf_left_height, dfltpic, DWIDE, DHIGH, j + xf_left_width/2, i + xf_left_height/2, 1); -@@ -179,29 +179,29 @@ +@@ -179,29 +183,29 @@ @@ -11522,7 +18104,28 @@ diff -ruN xv-3.10a/xvdflt.c xv-3.10a-bugfixes/xvdflt.c dfltpic, DWIDE, DHIGH, DWIDE/2 + (i/2) - xv_rev_width/2, 220, 102); strcpy(str,"Press <right> mouse button for menu."); -@@ -281,7 +281,7 @@ +@@ -240,7 +244,11 @@ + pinfo->w = DWIDE; + pinfo->h = DHIGH; + pinfo->type = PIC8; ++#ifdef HAVE_PNG ++ pinfo->frmType = F_PNG; ++#else + pinfo->frmType = F_GIF; ++#endif + pinfo->colType = F_FULLCOLOR; + + sprintf(pinfo->fullInfo, "<8-bit internal>"); +@@ -272,7 +280,7 @@ + x = cx - bwide/2; + + k = *bptr; +- for (j=0,bit=0; j<bwide; j++, bit = (++bit)&7, x++) { ++ for (j=0,bit=0; j<bwide; j++, bit = (bit+1)&7, x++) { + if (!bit) k = *bptr++; + if ( (k&1) && (x>=0) && (x<pwide)) + pptr[x] = col; +@@ -281,7 +289,7 @@ } } } @@ -11531,7 +18134,7 @@ diff -ruN xv-3.10a/xvdflt.c xv-3.10a-bugfixes/xvdflt.c /*******************************************/ -@@ -300,7 +300,7 @@ +@@ -300,7 +308,7 @@ byte *dfltpic; PICINFO *pinfo; { @@ -11540,7 +18143,7 @@ diff -ruN xv-3.10a/xvdflt.c xv-3.10a-bugfixes/xvdflt.c byte *pp; pp = dfltpic; -@@ -357,7 +357,7 @@ +@@ -357,7 +365,7 @@ for ( ; *str; str++, cx+=6) { i = (byte) *str; @@ -11549,9 +18152,34 @@ diff -ruN xv-3.10a/xvdflt.c xv-3.10a-bugfixes/xvdflt.c xbm2pic(font5x9[i - 32], 5, 9, pic, pw, ph, cx, cy, col); } } -diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c +diff -ru xv-3.10a/xvdflt.h xv-3.10a-enhancements/xvdflt.h +--- xv-3.10a/xvdflt.h 1994-12-22 14:34:56.000000000 -0800 ++++ xv-3.10a-enhancements/xvdflt.h 2007-04-15 20:45:08.000000000 -0700 +@@ -2,7 +2,7 @@ + #define XVDFLT_HIGH 270 + #define XVDFLT_NPARTS 5 + #define XVDFLT_PARTLEN 100 +-char *xvdflt_pic[1350] = { ++const char *xvdflt_pic[1350] = { + /* 0a */ "00000000000000000000000000000000000000000000000101010101010101010101010101010101010101010101010101010101010101000000000000000000000000000002020202020202020303030303030303030404040404040505050505060708", + /* 0b */ "0809090a0b0c0d0e0e0f101111121213131313141414141515151515151515151616161616161616161616161616161616161616161616161616161616171717171717171717171717171717161616161616161616161616161616161616161616161617", + /* 0c */ "171717181818181818181818181818181818181919181818181818191919191919191a1a1a1a1a1a1a1a1a1a1a1a1a1a1a1b1b1b1b1b1b1b1b1b1c1c1c1c1c1c1c1c1d1d1d1d1d1d1d1d1d1c1c1c1c1c1c1c1c1c1c1c1c1c1c1b1b1b1b1b1b1b1b1b1a1a", +@@ -1356,9 +1356,9 @@ + }; + + +-byte xvdflt_r[256] = { 83,83,84,84,84,85,92,94,100,109,119,124,133,137,145,157,163,168,175,183,191,202,203,255,254,253,252,251,250,249,145,114,83,106,129,249,250,251,250,243,216,226,241,222,222,132,61,82,244,249,243,248,173,59,247,102,252,241,244,244,57,241,216,239,6,17,157,244,139,236,250,246,84,213,121,240,70,30,99,91,38,73,105,123,82,40,30,38,114,81,44,35,37,35,30,33,1,0,5,1,1,4,3,0,0,11,0,0,6,15,7,3,8,0,0,4,8,11,15,0,10,11,14,11,0,14,0,28,6,1,22,17,8,1,8,7,7,13,0,9,10,6,7,10,11,11,18,7,2,8,7,9,5,10,8,16,6,6,5,8,8,6,10,8,4,30,22,5,33,33,11,6,10,15,19,13,28,21,35,28,10,25,26,27,29,3,27,14,21,30,31,27,31,35,6,33,37,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,}; ++const byte xvdflt_r[256] = { 83,83,84,84,84,85,92,94,100,109,119,124,133,137,145,157,163,168,175,183,191,202,203,255,254,253,252,251,250,249,145,114,83,106,129,249,250,251,250,243,216,226,241,222,222,132,61,82,244,249,243,248,173,59,247,102,252,241,244,244,57,241,216,239,6,17,157,244,139,236,250,246,84,213,121,240,70,30,99,91,38,73,105,123,82,40,30,38,114,81,44,35,37,35,30,33,1,0,5,1,1,4,3,0,0,11,0,0,6,15,7,3,8,0,0,4,8,11,15,0,10,11,14,11,0,14,0,28,6,1,22,17,8,1,8,7,7,13,0,9,10,6,7,10,11,11,18,7,2,8,7,9,5,10,8,16,6,6,5,8,8,6,10,8,4,30,22,5,33,33,11,6,10,15,19,13,28,21,35,28,10,25,26,27,29,3,27,14,21,30,31,27,31,35,6,33,37,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,}; + +-byte xvdflt_g[256] = { 83,83,84,84,84,85,92,94,100,109,119,124,133,137,145,157,162,168,174,184,191,196,205,255,254,253,252,251,250,249,146,114,83,106,130,211,185,176,173,230,211,157,161,170,144,31,52,82,168,168,162,248,116,42,247,68,171,164,245,244,35,159,133,161,18,26,151,163,138,65,67,51,68,49,111,159,88,30,100,87,38,74,92,124,82,38,22,38,114,81,22,35,37,35,30,33,1,0,4,0,1,4,2,0,0,11,0,0,6,15,7,3,8,0,0,4,9,10,14,0,10,10,13,11,0,7,0,18,6,0,22,18,8,1,8,7,7,13,0,9,9,6,7,10,11,11,18,7,2,9,7,9,5,10,8,16,6,6,5,8,8,7,9,8,4,30,22,5,33,32,11,6,10,15,19,13,28,21,35,25,9,22,26,27,29,3,27,14,21,30,31,11,31,35,6,18,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,}; ++const byte xvdflt_g[256] = { 83,83,84,84,84,85,92,94,100,109,119,124,133,137,145,157,162,168,174,184,191,196,205,255,254,253,252,251,250,249,146,114,83,106,130,211,185,176,173,230,211,157,161,170,144,31,52,82,168,168,162,248,116,42,247,68,171,164,245,244,35,159,133,161,18,26,151,163,138,65,67,51,68,49,111,159,88,30,100,87,38,74,92,124,82,38,22,38,114,81,22,35,37,35,30,33,1,0,4,0,1,4,2,0,0,11,0,0,6,15,7,3,8,0,0,4,9,10,14,0,10,10,13,11,0,7,0,18,6,0,22,18,8,1,8,7,7,13,0,9,9,6,7,10,11,11,18,7,2,9,7,9,5,10,8,16,6,6,5,8,8,7,9,8,4,30,22,5,33,32,11,6,10,15,19,13,28,21,35,25,9,22,26,27,29,3,27,14,21,30,31,11,31,35,6,18,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,}; + +-byte xvdflt_b[256] = { 251,250,252,253,254,255,254,255,254,253,254,254,252,255,255,253,251,253,253,253,254,249,252,255,254,253,252,251,250,249,252,255,249,253,250,162,99,79,81,225,239,113,92,147,72,43,37,248,84,88,91,248,83,34,247,80,84,86,245,244,30,90,74,92,10,55,239,85,250,90,88,72,125,68,206,92,190,87,245,230,133,216,199,248,247,105,73,108,252,244,62,97,119,143,150,134,57,49,64,64,72,78,72,40,75,98,66,59,110,110,80,89,95,86,34,87,80,88,77,48,100,80,98,89,33,60,29,75,91,73,111,87,120,89,103,103,126,111,23,121,108,147,111,142,105,111,111,140,107,107,118,113,112,110,114,123,140,120,141,132,124,130,98,127,151,102,124,132,108,119,123,159,124,135,123,124,114,135,126,100,122,126,132,140,126,164,119,149,149,137,113,75,127,114,131,78,107,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,}; ++const byte xvdflt_b[256] = { 251,250,252,253,254,255,254,255,254,253,254,254,252,255,255,253,251,253,253,253,254,249,252,255,254,253,252,251,250,249,252,255,249,253,250,162,99,79,81,225,239,113,92,147,72,43,37,248,84,88,91,248,83,34,247,80,84,86,245,244,30,90,74,92,10,55,239,85,250,90,88,72,125,68,206,92,190,87,245,230,133,216,199,248,247,105,73,108,252,244,62,97,119,143,150,134,57,49,64,64,72,78,72,40,75,98,66,59,110,110,80,89,95,86,34,87,80,88,77,48,100,80,98,89,33,60,29,75,91,73,111,87,120,89,103,103,126,111,23,121,108,147,111,142,105,111,111,140,107,107,118,113,112,110,114,123,140,120,141,132,124,130,98,127,151,102,124,132,108,119,123,159,124,135,123,124,114,135,126,100,122,126,132,140,126,164,119,149,149,137,113,75,127,114,131,78,107,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,}; + +diff -ru xv-3.10a/xvdial.c xv-3.10a-enhancements/xvdial.c --- xv-3.10a/xvdial.c 1995-01-03 13:20:31.000000000 -0800 -+++ xv-3.10a-bugfixes/xvdial.c 2004-05-16 18:01:57.000000000 -0700 ++++ xv-3.10a-enhancements/xvdial.c 2007-04-15 17:55:50.000000000 -0700 @@ -1,11 +1,11 @@ -/* +/* @@ -11566,16 +18194,39 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c * DSetActive() - turns dial '.active' on and off * DRedraw() - redraws the dial * DTrack() - called when clicked. Operates control 'til mouseup -@@ -50,7 +50,7 @@ +@@ -41,51 +41,53 @@ + + + /* local functions */ +-static int whereInDial PARM((DIAL *, int, int)); +-static void drawArrow PARM((DIAL *)); +-static void drawValStr PARM((DIAL *)); +-static void drawButt PARM((DIAL *, int, int)); +-static int computeDialVal PARM((DIAL *, int, int)); +-static void dimDial PARM((DIAL *)); ++static int whereInDial PARM((DIAL *, int, int)); ++static void drawArrow PARM((DIAL *)); ++static void drawValStr PARM((DIAL *)); ++static void drawButt PARM((DIAL *, int, int)); ++static double computeDialVal PARM((DIAL *, int, int)); ++static void dimDial PARM((DIAL *)); /***************************************************/ -void DCreate(dp, parent, x, y, w, h, minv, maxv, curv, page, -+void DCreate(dp, parent, x, y, w, h, minv, maxv, curv, page, ++void DCreate(dp, parent, x, y, w, h, minv, maxv, curv, inc, page, fg, bg, hi, lo, title, units) - DIAL *dp; - Window parent; -@@ -60,13 +60,13 @@ +-DIAL *dp; +-Window parent; +-int x,y,w,h,minv,maxv,curv,page; +-unsigned long fg,bg,hi,lo; +-char *title, *units; ++DIAL *dp; ++Window parent; ++int x, y, w, h; ++double minv, maxv, curv, inc, page; ++unsigned long fg, bg, hi, lo; ++const char *title, *units; { if (!pixmaps_built) { @@ -11593,7 +18244,81 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c (char *) dial_ccw2_bits, PW, PH, fg, bg, dispDEEP); } -@@ -126,14 +126,14 @@ +- dp->x = x; +- dp->y = y; +- +- dp->w = w; +- dp->h = h; +- dp->fg = fg; +- dp->bg = bg; +- dp->hi = hi; +- dp->lo = lo; +- dp->title = title; +- dp->units = units; +- dp->active = 1; ++ dp->x = x; ++ dp->y = y; ++ dp->w = w; ++ dp->h = h; ++ dp->fg = fg; ++ dp->bg = bg; ++ dp->hi = hi; ++ dp->lo = lo; ++ dp->title = title; ++ dp->units = units; ++ dp->active = 1; + dp->drawobj = NULL; + +- if (w < h-24-16) dp->rad = (w - 8) / 2; +- else dp->rad = (h - 24 - 16 - 8) / 2; ++ if (w < h-24-16) ++ dp->rad = (w - 8) / 2; ++ else ++ dp->rad = (h - 24 - 16 - 8) / 2; + dp->cx = w / 2; + dp->cy = dp->rad + 4 + 16; + +@@ -94,22 +96,22 @@ + dp->bx[INCW1] = w-14-4; dp->by[INCW1] = h - 4 - 20; + dp->bx[INCW2] = w-14-4; dp->by[INCW2] = h - 4 - 10; + +- dp->win = XCreateSimpleWindow(theDisp, parent,x,y,(u_int) w,(u_int) h, +- 1,fg,bg); ++ dp->win = XCreateSimpleWindow(theDisp, parent, x, y, (u_int) w, (u_int) h, ++ 1, fg, bg); + if (!dp->win) FatalError("can't create dial window"); + +- DSetRange(dp, minv, maxv, curv, page); ++ DSetRange(dp, minv, maxv, curv, inc, page); + XSelectInput(theDisp, dp->win, ExposureMask | ButtonPressMask); + } + + + /***************************************************/ +-void DSetRange(dp, minv, maxv, curv, page) +-DIAL *dp; +-int minv, maxv, curv, page; ++void DSetRange(dp, minv, maxv, curv, inc, page) ++DIAL *dp; ++double minv, maxv, curv, inc, page; + { + if (maxv<minv) maxv=minv; +- dp->min = minv; dp->max = maxv; dp->page = page; ++ dp->min = minv; dp->max = maxv; dp->inc = inc; dp->page = page; + dp->active = (minv < maxv); + + DSetVal(dp, curv); +@@ -118,22 +120,22 @@ + + /***************************************************/ + void DSetVal(dp, curv) +-DIAL *dp; +-int curv; ++DIAL *dp; ++double curv; + { + RANGE(curv, dp->min, dp->max); /* make sure curv is in-range */ + if (curv == dp->val) return; /* erase old arrow */ @@ -11601,7 +18326,8 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c + XSetForeground(theDisp, theGC, dp->bg); drawArrow(dp); - dp->val = curv; +- dp->val = curv; ++ dp->val = (double)((int)(curv / dp->inc + (curv > 0 ? 0.5 : -0.5))) * dp->inc; /* draw new arrow and string */ XSetForeground(theDisp, theGC, dp->fg); @@ -11610,8 +18336,25 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c drawArrow(dp); drawValStr(dp); if (!dp->active) dimDial(dp); -@@ -229,18 +229,18 @@ - case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-1); break; +@@ -202,7 +204,8 @@ + int mx,my; + { + Window rW,cW; +- int rx,ry, x,y, ipos, pos, lit, i, origval; ++ int rx, ry, x, y, ipos, pos, lit; ++ double origval; + unsigned int mask; + + lit = 0; +@@ -224,35 +227,36 @@ + if (ipos != INDIAL) { + drawButt(dp, ipos, 1); + switch (ipos) { +- case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+1); break; ++ case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+dp->inc); break; + case INCW2: if (dp->val < dp->max) DSetVal(dp, dp->val+dp->page); break; +- case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-1); break; ++ case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-dp->inc); break; case INCCW2: if (dp->val > dp->min) DSetVal(dp, dp->val-dp->page); break; } - if (dp->drawobj != NULL) (dp->drawobj)(); @@ -11621,10 +18364,13 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c } - else { -+ else { - i = computeDialVal(dp, mx, my); - DSetVal(dp, i); +- i = computeDialVal(dp, mx, my); +- DSetVal(dp, i); - if (dp->drawobj != NULL) (dp->drawobj)(); ++ else { ++ double v; ++ v = computeDialVal(dp, mx, my); ++ DSetVal(dp, v); + if (dp->drawobj != NULL) (dp->drawobj)(); } @@ -11633,25 +18379,38 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c /* loop until mouse is released */ while (XQueryPointer(theDisp,dp->win,&rW,&cW,&rx,&ry,&x,&y,&mask)) { if (!(mask & Button1Mask)) break; /* button released */ -@@ -252,7 +252,7 @@ - DSetVal(dp, i); - if (j != dp->val) { + + if (ipos == INDIAL) { +- int j; +- i = computeDialVal(dp, x, y); +- j = dp->val; +- DSetVal(dp, i); +- if (j != dp->val) { ++ double v, w; ++ v = computeDialVal(dp, x, y); ++ w = dp->val; ++ DSetVal(dp, v); ++ if (w != dp->val) { /* track whatever dial controls */ - if (dp->drawobj != NULL) (dp->drawobj)(); + if (dp->drawobj != NULL) (dp->drawobj)(); } } -@@ -266,7 +266,7 @@ +@@ -266,18 +270,18 @@ if (lit) { switch (ipos) { - case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+1); -+ case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+1); ++ case INCW1: if (dp->val < dp->max) DSetVal(dp, dp->val+dp->inc); break; case INCW2: if (dp->val < dp->max) DSetVal(dp, dp->val+dp->page); break; -@@ -277,7 +277,7 @@ +- case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-1); ++ case INCCW1: if (dp->val > dp->min) DSetVal(dp, dp->val-dp->inc); + break; + case INCCW2: if (dp->val > dp->min) DSetVal(dp, dp->val-dp->page); + break; } /* track whatever dial controls */ @@ -11660,7 +18419,7 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c Timer(INC2WAIT); } -@@ -305,17 +305,17 @@ +@@ -305,34 +309,35 @@ /* returns region * that x,y is in. returns -1 if none */ @@ -11681,7 +18440,76 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c /***************************************************/ static void drawArrow(dp) DIAL *dp; -@@ -366,10 +366,10 @@ + { +- int i, rad, cx, cy; ++ int rad, cx, cy; ++ double v; + XPoint arrow[4]; + + rad = dp->rad; cx = dp->cx; cy = dp->cy; + + /* map pos (range minv..maxv) into degrees (range 240..-60) */ +- i = 240 + (-300 * (dp->val - dp->min)) / (dp->max - dp->min); +- arrow[0].x = cx + (int) ((double) rad * .80 * cos(i * DEG2RAD)); +- arrow[0].y = cy - (int) ((double) rad * .80 * sin(i * DEG2RAD)); +- arrow[1].x = cx + (int) ((double) rad * .33 * cos((i+160) * DEG2RAD)); +- arrow[1].y = cy - (int) ((double) rad * .33 * sin((i+160) * DEG2RAD)); +- arrow[2].x = cx + (int) ((double) rad * .33 * cos((i-160) * DEG2RAD)); +- arrow[2].y = cy - (int) ((double) rad * .33 * sin((i-160) * DEG2RAD)); ++ v = 240 + (-300 * (dp->val - dp->min)) / (dp->max - dp->min); ++ arrow[0].x = cx + (int) ((double) rad * .80 * cos(v * DEG2RAD)); ++ arrow[0].y = cy - (int) ((double) rad * .80 * sin(v * DEG2RAD)); ++ arrow[1].x = cx + (int) ((double) rad * .33 * cos((v+160) * DEG2RAD)); ++ arrow[1].y = cy - (int) ((double) rad * .33 * sin((v+160) * DEG2RAD)); ++ arrow[2].x = cx + (int) ((double) rad * .33 * cos((v-160) * DEG2RAD)); ++ arrow[2].y = cy - (int) ((double) rad * .33 * sin((v-160) * DEG2RAD)); + arrow[3].x = arrow[0].x; + arrow[3].y = arrow[0].y; + XDrawLines(theDisp, dp->win, theGC, arrow, 4, CoordModeOrigin); +@@ -343,33 +348,47 @@ + static void drawValStr(dp) + DIAL *dp; + { +- int i, x1, x2; ++ int tot, i, x1, x2; + char foo[60], foo1[60]; + + /* compute longest string necessary so we can right-align this thing */ +- sprintf(foo,"%d",dp->min); x1 = strlen(foo); +- sprintf(foo,"%d",dp->max); x2 = strlen(foo); ++ sprintf(foo,"%d",(int)dp->min); x1 = strlen(foo); ++ sprintf(foo,"%d",(int)dp->max); x2 = strlen(foo); + if (dp->min < 0 && dp->max > 0) x2++; /* put '+' at beginning */ + i = x1; if (x2>x1) i = x2; + if (dp->units) i += strlen(dp->units); + +- if (dp->min < 0 && dp->max > 0) sprintf(foo,"%+d", dp->val); +- else sprintf(foo,"%d", dp->val); ++ sprintf(foo,"%g",dp->inc); /* space for decimal values */ ++ tot = i + strlen(foo) - 1; /* Take away the 0 from the beginning */ ++ ++ if (dp->min < 0.0 && dp->max > 0.0) sprintf(foo,"%+g", dp->val); ++ else sprintf(foo,"%g", dp->val); ++ ++ if (dp->inc < 1.0) ++ { ++ int j; ++ ++ if (dp->val == (double)((int)dp->val)) ++ strcat(foo,"."); ++ ++ for (j = strlen(foo); j < tot; j++) ++ strcat(foo,"0"); ++ } + + if (dp->units) strcat(foo,dp->units); + foo1[0] = '\0'; + if (strlen(foo) < (size_t) i) { +- for (i = i - strlen(foo); i>0; i--) strcat(foo1," "); ++ for (i-=strlen(foo);i>0;i--) strcat(foo1," "); + } + strcat(foo1, foo); + XSetForeground(theDisp, theGC, dp->fg); XSetBackground(theDisp, theGC, dp->bg); XSetFont(theDisp, theGC, monofont); @@ -11694,7 +18522,24 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c foo1, (int) strlen(foo1)); XSetFont(theDisp, theGC, mfont); } -@@ -431,7 +431,7 @@ +@@ -411,12 +430,13 @@ + + + /***************************************************/ +-static int computeDialVal(dp, x, y) ++static double computeDialVal(dp, x, y) + DIAL *dp; + int x, y; + { +- int dx, dy, val; +- double angle; ++ int dx, dy; ++ ++ double angle, val; + + /* compute dx, dy (distance from cx, cy). Note: +dy is *up* */ + dx = x - dp->cx; dy = dp->cy - y; +@@ -431,13 +451,15 @@ } else if (dx>0) angle = atan((double) dy / (double) dx) * RAD2DEG; else angle = atan((double) -dy / (double) -dx) * RAD2DEG + 180.0; @@ -11703,25 +18548,110 @@ diff -ruN xv-3.10a/xvdial.c xv-3.10a-bugfixes/xvdial.c /* map angle into range: -90..270, then into to value */ if (angle > 270.0) angle -= 360.0; if (angle < -90.0) angle += 360.0; -diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c + +- val = (int) ((dp->max - dp->min) * (240.0 - angle) / 300.0) + dp->min; ++ val = ((dp->max - dp->min) * (240.0 - angle) / 300.0) + dp->min; + ++ /* round value to be an even multiple of dp->inc */ ++ val = (double)((int)(val / dp->inc + 0.5)) * dp->inc; + return val; + } + +diff -ru xv-3.10a/xvdir.c xv-3.10a-enhancements/xvdir.c --- xv-3.10a/xvdir.c 1995-01-03 13:21:39.000000000 -0800 -+++ xv-3.10a-bugfixes/xvdir.c 2005-03-20 18:38:30.000000000 -0800 ++++ xv-3.10a-enhancements/xvdir.c 2007-05-13 18:47:51.000000000 -0700 @@ -1,4 +1,4 @@ -/* +/* * xvdir.c - Directory changin', file i/o dialog box * * callable functions: -@@ -50,7 +50,7 @@ +@@ -50,32 +50,63 @@ #define COLWIDE 150 /* width of colMB */ /* NOTE: make sure these match up with F_* definitions in xv.h */ -static char *saveColors[] = { "Full Color", -+static char *saveColors[] = { "Full Color", - "Greyscale", - "B/W Dithered", - "Reduced Color" }; -@@ -83,14 +83,16 @@ +- "Greyscale", +- "B/W Dithered", +- "Reduced Color" }; +- +-static char *saveFormats[] = { "GIF", ++static const char *saveColors[] = { "Full Color", ++ "Greyscale", ++ "B/W Dithered", ++ "Reduced Color" }; ++ ++static const char *saveFormats[] = { ++#ifdef HAVE_PNG ++ "PNG", ++#endif + #ifdef HAVE_JPEG +- "JPEG", ++ "JPEG", + #endif ++#ifdef HAVE_JP2K ++ "JPEG 2000", ++ "JP2", ++#endif ++ "GIF", + #ifdef HAVE_TIFF +- "TIFF", ++ "TIFF", ++#endif ++ "PostScript", ++ "PBM/PGM/PPM (raw)", ++ "PBM/PGM/PPM (ascii)", ++ "X11 Bitmap", ++ "XPM", ++ "BMP", ++ "Sun Rasterfile", ++ "IRIS RGB", ++ "Targa (24-bit)", ++ "FITS", ++ "PM", ++ "Spectrum SCREEN$", /* [JCE] */ ++ "WBMP", ++#ifdef HAVE_MAG ++ "MAG", ++#endif ++#ifdef HAVE_PIC ++ "PIC", ++#endif ++#ifdef HAVE_MAKI ++ "MAKI (640x400 only)", ++#endif ++#ifdef HAVE_PI ++ "PI", ++#endif ++#ifdef HAVE_PIC2 ++ "PIC2", ++#endif ++#ifdef HAVE_MGCSFX ++ "MgcSfx", + #endif +- "PostScript", +- "PBM/PGM/PPM (raw)", +- "PBM/PGM/PPM (ascii)", +- "X11 Bitmap", +- "XPM", +- "BMP", +- "Sun Rasterfile", +- "IRIS RGB", +- "Targa (24-bit)", +- "FITS", +- "PM", +- MBSEP, +- "Filename List"}; ++ MBSEP, ++ "Filename List" }; + ++#ifdef HAVE_PIC2 ++extern int PIC2SaveParams PARM((char *, int)); ++#endif + + static void arrangeButts PARM((int)); + static void RedrawDList PARM((int, SCRL *)); +@@ -83,34 +114,37 @@ static int dnamcmp PARM((const void *, const void *)); static int FNameCdable PARM((void)); static void loadCWD PARM((void)); @@ -11729,7 +18659,8 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c static int cd_able PARM((char *)); +#endif static void scrollToFileName PARM((void)); - static void setFName PARM((char *)); +-static void setFName PARM((char *)); ++static void setFName PARM((const char *)); static void showFName PARM((void)); static void changeSuffix PARM((void)); static int autoComplete PARM((void)); @@ -11739,7 +18670,44 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c byte **, byte **, byte **)); static byte *handleNormSel PARM((int *, int *, int *, int *)); -@@ -119,7 +121,7 @@ + +-static char *fnames[MAXNAMES]; +-static int numfnames = 0, ndirs = 0; +-static char path[MAXPATHLEN+1]; /* '/' terminated */ +-static char loadpath[MAXPATHLEN+1]; /* '/' terminated */ +-static char savepath[MAXPATHLEN+1]; /* '/' terminated */ +-static char *dirs[MAXDEEP]; /* list of directory names */ +-static char *dirMBlist[MAXDEEP]; /* list of dir names in right order */ +-static char *lastdir; /* name of the directory we're in */ +-static char filename[MAXFNLEN+100]; /* filename being entered */ +-static char deffname[MAXFNLEN+100]; /* default filename */ +- +-static int savemode; /* if 0 'load box', if 1 'save box' */ +-static int curPos, stPos, enPos; /* filename textedit stuff */ +-static MBUTT dirMB; /* popup path menu */ +-static MBUTT fmtMB; /* 'format' menu button (Save only) */ +-static MBUTT colMB; /* 'colors' menu button (Save only) */ ++static char *fnames[MAXNAMES]; ++static int numfnames = 0, ndirs = 0; ++static char path[MAXPATHLEN+1]; /* '/' terminated */ ++static char loadpath[MAXPATHLEN+1]; /* '/' terminated */ ++static char savepath[MAXPATHLEN+1]; /* '/' terminated */ ++static char *dirs[MAXDEEP]; /* list of directory names */ ++static const char *dirMBlist[MAXDEEP]; /* list of dir names in right order */ ++static char *lastdir; /* name of the directory we're in */ ++static char filename[MAXFNLEN+100]; /* filename being entered */ ++static char deffname[MAXFNLEN+100]; /* default filename */ ++ ++static int savemode; /* if 0 'load box', if 1 'save box' */ ++static int curPos; /* insertion point in textedit filename */ ++static int stPos, enPos; /* start and end of visible textedit filename */ ++static MBUTT dirMB; /* popup path menu */ ++static MBUTT fmtMB; /* 'format' menu button (Save only) */ ++static MBUTT colMB; /* 'colors' menu button (Save only) */ + + static Pixmap d_loadPix, d_savePix; + +@@ -119,7 +153,7 @@ static char oldfname[MAXFNLEN+100]; /* the name of the file actually opened. (the temp file if we are piping) */ @@ -11748,7 +18716,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c static int dopipe; -@@ -127,48 +129,46 @@ +@@ -127,48 +161,46 @@ void CreateDirW(geom) char *geom; { @@ -11810,7 +18778,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c "Prev Name", infofg,infobg,hicol,locol); SetDirFName(""); -@@ -180,33 +180,33 @@ +@@ -180,33 +212,33 @@ * create MBUTTs *after* calling XMapSubWindows() to keep popup unmapped */ @@ -11854,7 +18822,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /***************************************************/ void DirBox(mode) -@@ -261,7 +261,7 @@ +@@ -261,7 +293,7 @@ BTSetActive(&dbut[S_BOLDSET], haveoldinfo); BTSetActive(&dbut[S_BOLDNAM], haveoldinfo); @@ -11863,7 +18831,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c CBSetActive(&saveselCB, HaveSelection()); MBSetActive(&fmtMB, 1); -@@ -303,15 +303,15 @@ +@@ -303,15 +335,15 @@ if (gap>16) { gap = 16; top = dList.y + (dList.h - (nbts*BUTTH) - (ngaps*gap))/2; @@ -11882,11 +18850,14 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /***************************************************/ -@@ -320,23 +320,22 @@ +@@ -319,24 +351,24 @@ + int x,y,w,h; { int i, ypos, txtw; - char foo[30], *str; +- char foo[30], *str; - XRectangle xr; ++ char foo[30]; ++ const char *str; if (dList.nstr==1) strcpy(foo,"1 file"); else sprintf(foo,"%d files",dList.nstr); @@ -11909,7 +18880,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /* draw dividing line */ XSetForeground(theDisp, theGC, infofg); XDrawLine(theDisp, dirW, theGC, 0, dirMB.y-6, DIRWIDE, dirMB.y-6); -@@ -346,11 +345,11 @@ +@@ -346,11 +378,11 @@ XSetForeground(theDisp, theGC, hicol); } XDrawLine(theDisp, dirW, theGC, 0, dirMB.y-4, DIRWIDE, dirMB.y-4); @@ -11925,7 +18896,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c MBRedraw(&dirMB); MBRedraw(&fmtMB); MBRedraw(&colMB); -@@ -362,7 +361,7 @@ +@@ -362,7 +394,7 @@ if (StringWidth(COLLABEL) > txtw) txtw = StringWidth(COLLABEL); if (!savemode) { @@ -11934,7 +18905,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c 10, (dirMB.y-6)/2 - d_load_height/2); XSetFillStyle(theDisp, theGC, FillStippled); -@@ -399,18 +398,18 @@ +@@ -399,18 +431,18 @@ i = v = 0; if (MBClick(&fmtMB, x,y) && (v=MBTrack(&fmtMB))>=0) i=1; else if (MBClick(&colMB, x,y) && (v=MBTrack(&colMB))>=0) i=2; @@ -11957,7 +18928,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c else { /* SAVE */ if (CBClick(&savenormCB,x,y)) CBTrack(&savenormCB); else if (CBClick(&saveselCB,x,y)) CBTrack(&saveselCB); -@@ -482,7 +481,7 @@ +@@ -482,7 +514,7 @@ } if (oldnumnames != numnames) { /* added some */ @@ -11966,7 +18937,44 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c windowMB.dim[WMB_TEXTVIEW] = (numnames==0); LSNewData(&nList, dispnames, numnames); -@@ -564,7 +563,7 @@ +@@ -501,10 +533,35 @@ + } + + +- + if (MBClick(&dirMB, x, y)) { + i = MBTrack(&dirMB); + if (i >= 0) changedDirMB(i); ++ return -1; ++ } ++ ++ /* handle clicks inside the filename box */ ++ if (x > 80 && ++ y > dList.y + (int) dList.h + 30 && ++ x < 80 + DNAMWIDE+6 && ++ y < dList.y + (int) dList.h + 30 + LINEHIGH+5) { ++ int tx; ++ int dx; ++ int pos; ++ ++ /* make coordinates relative to dnamW */ ++ tx = x - (80 + 1 + 3); /* left side plus the border plus the space for the "more stuff" sign */ ++ ++ for (pos=stPos; pos+1 < enPos; pos++) { ++ if (XTextWidth(mfinfo, &filename[stPos], 1+pos-stPos) > tx) ++ break; ++ } ++ /* if we are more than halfway past this char, put the insertion point after it */ ++ dx = tx - XTextWidth(mfinfo, &filename[stPos], pos-stPos); ++ if (dx > XTextWidth(mfinfo, &filename[pos], 1)/2) ++ pos++; ++ ++ curPos = pos; ++ showFName(); + } + + return -1; +@@ -564,14 +621,18 @@ * a special concealed device setup to provide a list of available * disks). */ @@ -11975,7 +18983,18 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c strcat ( tmppath, "/000000" ); /* add root dir for device */ else if ((ndirs-sel) == 1 ) { strcpy ( tmppath, "/XV_Root_Device/000000" ); /* fake top level */ -@@ -602,7 +601,7 @@ + } + #endif + ++#ifdef AUTO_EXPAND ++ if (Chvdir(tmppath)) { ++#else + if (chdir(tmppath)) { ++#endif + char str[512]; + sprintf(str,"Unable to cd to '%s'\n", tmppath); + *trunc_point = '/'; /* restore the path */ +@@ -602,7 +663,7 @@ xv_getwd(path, sizeof(path)); LoadCurrentDirectory(); } @@ -11984,7 +19003,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /***************************************************/ -@@ -621,7 +620,7 @@ +@@ -621,14 +682,14 @@ #else struct dirent *dp; #endif @@ -11993,9 +19012,56 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /* get rid of previous file names */ for (i=0; i<numfnames; i++) free(fnames[i]); -@@ -680,12 +679,12 @@ - strncpy(dirMBlist[j], dirs[i], stlen); - dirMBlist[j][stlen] = '\0'; + numfnames = 0; + + /* get rid of old dirMBlist */ +- for (i=0; i<ndirs; i++) free(dirMBlist[i]); ++ for (i=0; i<ndirs; i++) free((char *) dirMBlist[i]); + + #ifndef VMS + if (strlen(path) == 0) xv_getwd(path, sizeof(path)); /* no dir, use cwd */ +@@ -636,7 +697,11 @@ + xv_getwd(path, sizeof(path)); + #endif + ++#ifdef AUTO_EXPAND ++ if (Chvdir(path)) { ++#else + if (chdir(path)) { ++#endif + ErrPopUp("Current load/save directory seems to have gone away!", + "\nYikes!"); + #ifdef apollo +@@ -644,7 +709,11 @@ + #else + strcpy(path,"/"); + #endif ++#ifdef AUTO_EXPAND ++ Chvdir(path); ++#else + chdir(path); ++#endif + } + + changedDir = strcmp(path, oldpath); +@@ -673,19 +742,22 @@ + + /* build dirMBlist */ + for (i=ndirs-1,j=0; i>=0; i--,j++) { +- size_t stlen = (i<(ndirs-1)) ? dirs[i+1] - dirs[i] : strlen(dirs[i]); +- dirMBlist[j] = (char *) malloc(stlen+1); +- if (!dirMBlist[j]) FatalError("unable to malloc dirMBlist[]"); ++ size_t stlen = (i<(ndirs-1)) ? dirs[i+1] - dirs[i] : strlen(dirs[i]); ++ char *copy; ++ ++ copy = malloc(stlen+1); ++ if (!copy) FatalError("unable to malloc dirMBlist[]"); + +- strncpy(dirMBlist[j], dirs[i], stlen); +- dirMBlist[j][stlen] = '\0'; ++ strncpy(copy, dirs[i], stlen); ++ copy[stlen] = '\0'; ++ dirMBlist[j] = copy; } - + @@ -12008,7 +19074,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c (u_int) dirMB.w+3, (u_int) dirMB.h+3, False); i = StringWidth(dirMBlist[0]) + 10; dirMB.x = dirMB.x + dirMB.w/2 - i/2; -@@ -704,8 +703,8 @@ +@@ -704,8 +776,8 @@ i=0; while ( (dp = readdir(dirp)) != NULL) { @@ -12019,7 +19085,16 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c (strcmp(path,"/")==0 || strcmp(path,"//")==0)) || strcmp(dp->d_name, THUMBDIR)==0) { /* skip over '.' and '..' and THUMBDIR */ -@@ -733,7 +732,7 @@ +@@ -714,7 +786,7 @@ + + if (i == MAXNAMES) { + fprintf(stderr, +- "%s: too many directory entries. Only using first %d.\n", ++ "%s: too many directory entries. Using only first %d.\n", + cmd, MAXNAMES); + break; + } +@@ -733,7 +805,7 @@ /* For VMS we will default all files EXCEPT directories to avoid the high cost of the VAX C implementation of the stat function. Suggested by Kevin Oberman (OBERMAN@icdc.llnl.gov) */ @@ -12028,7 +19103,17 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (xv_strstr (fnames[i]+1, ".DIR") != NULL) fnames[i][0] = C_DIR; if (xv_strstr (fnames[i]+1, ".EXE") != NULL) fnames[i][0] = C_EXE; if (xv_strstr (fnames[i]+1, ".OBJ") != NULL) fnames[i][0] = C_BLK; -@@ -784,11 +783,13 @@ +@@ -749,6 +821,9 @@ + else if (S_ISFIFO(ftype)) fnames[i][0] = C_FIFO; + else if (S_ISSOCK(ftype)) fnames[i][0] = C_SOCK; + else if (fnames[i][0] == C_REG && (mode&0111)) fnames[i][0] = C_EXE; ++#ifdef AUTO_EXPAND ++ else if (Isarchive(fnames[i]+1)) fnames[i][0] = C_DIR; ++#endif + } + else { + /* fprintf(stderr,"problems 'stat-ing' files\n");*/ +@@ -784,11 +859,13 @@ /***************************************************/ @@ -12042,7 +19127,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /***************************************************/ -@@ -829,7 +830,7 @@ +@@ -829,24 +906,28 @@ int len; len = strlen(filename); @@ -12051,7 +19136,38 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (c>=' ' && c<'\177') { /* printable characters */ /* note: only allow 'piped commands' in savemode... */ -@@ -918,19 +919,19 @@ ++#undef PREVENT_SPACES /* Spaces are fine in filenames. */ ++#ifdef PREVENT_SPACES + /* only allow spaces in 'piped commands', not filenames */ + if (c==' ' && (!ISPIPE(filename[0]) || curPos==0)) return (-1); ++#endif + + /* only allow vertbars in 'piped commands', not filenames */ + if (c=='|' && curPos!=0 && !ISPIPE(filename[0])) return(-1); + + if (len >= MAXFNLEN-1) return(-1); /* max length of string */ ++ + xvbcopy(&filename[curPos], &filename[curPos+1], (size_t) (len-curPos+1)); + filename[curPos]=c; curPos++; + + scrollToFileName(); + } + +- else if (c=='\010' || c=='\177') { /* BS or DEL */ ++ else if (c=='\010') { /* BS */ + if (curPos==0) return(-1); /* at beginning of str */ + xvbcopy(&filename[curPos], &filename[curPos-1], (size_t) (len-curPos+1)); + curPos--; +@@ -871,7 +952,7 @@ + curPos = len; + } + +- else if (c=='\004') { /* ^D: delete character at curPos */ ++ else if (c=='\004' || c=='\177') { /* ^D or DEL: delete character at curPos */ + if (curPos==len) return(-1); + xvbcopy(&filename[curPos+1], &filename[curPos], (size_t) (len-curPos)); + } +@@ -918,19 +999,19 @@ { /* called to 'auto complete' a filename being entered. If the name that has been entered so far is anything but a simple filename (ie, has @@ -12076,7 +19192,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c ISPIPE(filename[0]) || index(filename, '/') || filename[0]=='~' ) return 0; -@@ -946,7 +947,7 @@ +@@ -946,7 +1027,7 @@ firstmatch = i; /* count # of matches */ @@ -12085,7 +19201,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c i<dList.nstr && strncmp(filename, dList.str[i]+1, (size_t) slen)==0; i++, nummatch++); -@@ -960,14 +961,14 @@ +@@ -960,14 +1041,14 @@ while (dList.str[firstmatch][slen+1]!='\0') { filename[slen] = dList.str[firstmatch][slen+1]; slen++; filename[slen] = '\0'; @@ -12103,7 +19219,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c XBell(theDisp, 0); return 1; -@@ -1003,7 +1004,7 @@ +@@ -1003,7 +1084,7 @@ i = pos - (NLINES/2); SCSetVal(&dList.scrl, i); } @@ -12112,7 +19228,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /***************************************************/ void RedrawDNamW() -@@ -1012,7 +1013,7 @@ +@@ -1012,7 +1093,7 @@ /* draw substring filename[stPos:enPos] and cursor */ @@ -12121,7 +19237,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c hicol, locol, infobg); XSetForeground(theDisp, theGC, infofg); -@@ -1023,7 +1024,7 @@ +@@ -1023,7 +1104,7 @@ XDrawLine(theDisp, dnamW, theGC, 2,0,2,LINEHIGH+5); } @@ -12130,7 +19246,37 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /* draw a "there's more over here" doowah */ XDrawLine(theDisp, dnamW, theGC, DNAMWIDE+5,0,DNAMWIDE+5,LINEHIGH+5); XDrawLine(theDisp, dnamW, theGC, DNAMWIDE+4,0,DNAMWIDE+4,LINEHIGH+5); -@@ -1057,7 +1058,7 @@ +@@ -1032,6 +1113,7 @@ + + XDrawString(theDisp, dnamW, theGC,3,ASCENT+3,filename+stPos, enPos-stPos); + ++ /* draw insertion point */ + cpos = XTextWidth(mfinfo, &filename[stPos], curPos-stPos); + XDrawLine(theDisp, dnamW, theGC, 3+cpos, 2, 3+cpos, 2+CHIGH+1); + XDrawLine(theDisp, dnamW, theGC, 3+cpos, 2+CHIGH+1, 5+cpos, 2+CHIGH+3); +@@ -1054,10 +1136,29 @@ + + fullname = GetDirFullName(); + ++#ifdef AUTO_EXPAND ++ { ++ char path[MAXPATHLEN]; ++ ++ GetDirPath(path); ++ Mkvdir(path); ++ if ((i = Isvdir(fullname)) & 01) { ++ char buf[128]; ++ sprintf(buf, ++ "Sorry, you can't save file in the virtual directory, '%s'", ++ path); ++ ErrPopUp(buf, "\nBummer!"); ++ return -1; ++ } ++ if (i & 06) ++ Rmvdir(fullname); ++ } ++#endif ++ fmt = MBWhich(&fmtMB); col = MBWhich(&colMB); @@ -12139,7 +19285,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c FatalError("xv: no 'checked' format or color. shouldn't happen!\n"); -@@ -1068,19 +1069,19 @@ +@@ -1068,19 +1169,19 @@ dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); return -1; } @@ -12162,7 +19308,67 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c SetCursors(-1); dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); return i; -@@ -1147,34 +1148,41 @@ +@@ -1100,7 +1201,16 @@ + #ifdef HAVE_JPEG + else if (fmt == F_JPEG) { /* JPEG */ + JPEGSaveParams(fullname, col); +- JPEGDialog(1); /* open JPEGDialog box */ ++ JPEGDialog(1); /* open JPEGDialog box */ ++ dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); ++ return 0; /* always 'succeeds' */ ++ } ++#endif ++ ++#ifdef HAVE_JP2K ++ else if (fmt == F_JPC || fmt == F_JP2) { /* JPEG 2000 */ ++ JP2KSaveParams(fmt, fullname, col); ++ JP2KDialog(1); /* open JP2KDialog box */ + dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); + return 0; /* always 'succeeds' */ + } +@@ -1109,13 +1219,40 @@ + #ifdef HAVE_TIFF + else if (fmt == F_TIFF) { /* TIFF */ + TIFFSaveParams(fullname, col); +- TIFFDialog(1); /* open TIFF Dialog box */ ++ TIFFDialog(1); /* open TIFF Dialog box */ ++ dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); ++ return 0; /* always 'succeeds' */ ++ } ++#endif ++ ++#ifdef HAVE_PNG ++ else if (fmt == F_PNG) { /* PNG */ ++ PNGSaveParams(fullname, col); ++ PNGDialog(1); /* open PNG Dialog box */ + dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); + return 0; /* always 'succeeds' */ + } + #endif + ++#ifdef HAVE_PIC2 ++ else if (fmt == F_PIC2) { /* PIC2 */ ++ if (PIC2SaveParams(fullname, col) < 0) ++ return 0; ++ PIC2Dialog(1); /* open PIC2 Dialog box */ ++ dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); ++ return 0; /* always 'succeeds' */ ++ } ++#endif /* HAVE_PIC2 */ + ++#ifdef HAVE_MGCSFX ++ else if (fmt == F_MGCSFX) { /* MGCSFX */ ++ if (MGCSFXSaveParams(fullname, col) < 0) ++ return 0; ++ MGCSFXDialog(1); /* open MGCSFX Dialog box */ ++ dbut[S_BOK].lit = 0; BTRedraw(&dbut[S_BOK]); ++ return 0; /* always 'succeeds' */ ++ } ++#endif /* HAVE_MGCSFX */ + + + WaitCursor(); +@@ -1147,34 +1284,74 @@ rv = WritePBM (fp, thepic, ptype, w, h, rp,gp,bp, nc,col,1,picComments); break; @@ -12185,6 +19391,10 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c - rv = WriteBMP (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); break; + rv = WriteBMP (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); + break; ++ ++ case F_WBMP: ++ rv = WriteWBMP (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); ++ break; case F_IRIS: - rv = WriteIRIS (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); break; @@ -12210,14 +19420,43 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c - picComments); + rv = WriteFITS (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, + picComments); ++ break; ++ ++ case F_ZX: /* [JCE] Spectrum SCREEN$ */ ++ rv = WriteZX (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, ++ picComments); ++ break; ++#ifdef HAVE_MAG ++ case F_MAG: ++ rv = WriteMAG (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, ++ picComments); ++ break; ++#endif /* HAVE_MAG */ ++#ifdef HAVE_PIC ++ case F_PIC: ++ rv = WritePIC (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, ++ picComments); break; ++#endif /* HAVE_PIC */ ++#ifdef HAVE_MAKI ++ case F_MAKI: ++ rv = WriteMAKI (fp, thepic, ptype, w, h, rp, gp, bp, nc, col); ++ break; ++#endif /* HAVE_MAKI */ ++ ++#ifdef HAVE_PI ++ case F_PI: ++ rv = WritePi (fp, thepic, ptype, w, h, rp, gp, bp, nc, col, ++ picComments); ++ break; ++#endif /* HAVE_PI */ } - + if (CloseOutFile(fp, fullname, rv) == 0) { DirBox(0); -@@ -1184,12 +1192,12 @@ +@@ -1184,12 +1361,12 @@ } } @@ -12233,15 +19472,25 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c return rv; } -@@ -1200,6 +1208,7 @@ - char *st; +@@ -1197,22 +1374,23 @@ + + /***************************************************/ + void SetDirFName(st) +- char *st; ++ const char *st; { strncpy(deffname, st, (size_t) MAXFNLEN-1); + deffname[MAXFNLEN-1] = '\0'; setFName(st); } -@@ -1212,7 +1221,7 @@ + + /***************************************************/ + static void setFName(st) +- char *st; ++ const char *st; + { + strncpy(filename, st, (size_t) MAXFNLEN-1); filename[MAXFNLEN-1] = '\0'; /* make sure it's terminated */ curPos = strlen(st); stPos = 0; enPos = curPos; @@ -12250,7 +19499,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c showFName(); } -@@ -1221,17 +1230,17 @@ +@@ -1221,17 +1399,17 @@ static void showFName() { int len; @@ -12273,7 +19522,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c while (XTextWidth(mfinfo, &filename[stPos], enPos-stPos) < DNAMWIDE && enPos<len) { enPos++; } -@@ -1244,7 +1253,7 @@ +@@ -1244,7 +1422,7 @@ } @@ -12282,7 +19531,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c (u_int) LINEHIGH+4-3, False); else XClearWindow(theDisp, dnamW); -@@ -1270,7 +1279,7 @@ +@@ -1270,7 +1448,7 @@ else { strcpy(globname, filename); if (globname[0] == '~') Globify(globname); @@ -12291,7 +19540,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (globname[0] != '/') sprintf(fullname, "%s%s", path, globname); else strcpy(fullname, globname); } -@@ -1294,10 +1303,10 @@ +@@ -1294,14 +1472,15 @@ MBRedraw(&fmtMB); } } @@ -12304,7 +19553,13 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c else if (group == F_FORMAT) { MBSelect(&fmtMB, bnum); -@@ -1322,10 +1331,10 @@ +- if (MBWhich(&fmtMB) == F_XBM) { /* turn off all but B/W */ ++ if (MBWhich(&fmtMB) == F_XBM || ++ MBWhich(&fmtMB) == F_WBMP) { /* turn off all but B/W */ + colMB.dim[F_FULLCOLOR] = 1; + colMB.dim[F_GREYSCALE] = 1; + colMB.dim[F_BWDITHER] = 0; +@@ -1322,10 +1501,10 @@ colMB.dim[F_GREYSCALE] = 0; colMB.dim[F_BWDITHER] = 0; colMB.dim[F_REDUCED] = (picType==PIC8) ? 0 : 1; @@ -12317,7 +19572,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (MBWhich(&fmtMB) == F_FILELIST) { MBSetActive(&colMB, 0); CBSetActive(&savenormCB, 0); -@@ -1337,12 +1346,12 @@ +@@ -1337,12 +1516,12 @@ } } @@ -12332,7 +19587,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if there is, remember what case it was (all caps or all lower), lop it off, and replace it with a new appropriate suffix, in the same case */ -@@ -1356,7 +1365,7 @@ +@@ -1356,7 +1535,7 @@ suffix++; /* point to first letter of the suffix */ /* check for all-caposity */ @@ -12341,7 +19596,43 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (islower(*sp)) allcaps = 0; /* copy the suffix into an all-lower-case buffer */ -@@ -1401,7 +1410,7 @@ +@@ -1380,14 +1559,33 @@ + (strcmp(lowsuf,"eps" )==0) || + (strcmp(lowsuf,"rgb" )==0) || + (strcmp(lowsuf,"tga" )==0) || +- (strcmp(lowsuf,"xpm" )==0) || + (strcmp(lowsuf,"fits")==0) || + (strcmp(lowsuf,"fts" )==0) || ++#ifdef HAVE_JPEG + (strcmp(lowsuf,"jpg" )==0) || + (strcmp(lowsuf,"jpeg")==0) || + (strcmp(lowsuf,"jfif")==0) || ++#endif ++#ifdef HAVE_JP2K ++ (strcmp(lowsuf,"jpc" )==0) || ++ (strcmp(lowsuf,"jp2" )==0) || ++#endif ++#ifdef HAVE_TIFF + (strcmp(lowsuf,"tif" )==0) || +- (strcmp(lowsuf,"tiff")==0)) { ++ (strcmp(lowsuf,"tiff")==0) || ++#endif ++#ifdef HAVE_PNG ++ (strcmp(lowsuf,"png" )==0) || ++#endif ++ (strcmp(lowsuf,"wbmp")==0) || ++ (strcmp(lowsuf,"xpm" )==0) || ++ (strcmp(lowsuf,"tiff")==0) || ++ (strcmp(lowsuf,"mag" )==0) || ++ (strcmp(lowsuf,"pic" )==0) || ++ (strcmp(lowsuf,"mki" )==0) || ++ (strcmp(lowsuf,"pi" )==0) || ++ (strcmp(lowsuf,"p2" )==0) || ++ (strcmp(lowsuf,"pcd" )==0)) { + + /* found one. set lowsuf = to the new suffix, and tack on to filename */ + +@@ -1401,7 +1599,7 @@ case F_GIF: strcpy(lowsuf,"gif"); break; case F_PM: strcpy(lowsuf,"pm"); break; case F_PBMRAW: @@ -12350,9 +19641,53 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c strcpy(lowsuf,"ppm"); else if (col == F_GREYSCALE) strcpy(lowsuf,"pgm"); else if (col == F_BWDITHER) strcpy(lowsuf,"pbm"); -@@ -1426,10 +1435,10 @@ +@@ -1410,6 +1608,7 @@ + case F_XBM: strcpy(lowsuf,"xbm"); break; + case F_SUNRAS: strcpy(lowsuf,"ras"); break; + case F_BMP: strcpy(lowsuf,"bmp"); break; ++ case F_WBMP: strcpy(lowsuf,"wbmp"); break; + case F_PS: strcpy(lowsuf,"ps"); break; + case F_IRIS: strcpy(lowsuf,"rgb"); break; + case F_TARGA: strcpy(lowsuf,"tga"); break; +@@ -1420,16 +1619,46 @@ + case F_JPEG: strcpy(lowsuf,"jpg"); break; + #endif + ++#ifdef HAVE_JP2K ++ case F_JPC: strcpy(lowsuf,"jpc"); break; ++ case F_JP2: strcpy(lowsuf,"jp2"); break; ++#endif ++ + #ifdef HAVE_TIFF + case F_TIFF: strcpy(lowsuf,"tif"); break; + #endif ++ ++#ifdef HAVE_PNG ++ case F_PNG: strcpy(lowsuf,"png"); break; ++#endif ++ ++#ifdef HAVE_MAG ++ case F_MAG: strcpy(lowsuf,"mag"); break; ++#endif ++ ++#ifdef HAVE_PIC ++ case F_PIC: strcpy(lowsuf,"pic"); break; ++#endif ++ ++#ifdef HAVE_MAKI ++ case F_MAKI: strcpy(lowsuf,"mki"); break; ++#endif ++ ++#ifdef HAVE_PI ++ case F_PI: strcpy(lowsuf,"pi"); break; ++#endif ++ ++#ifdef HAVE_PIC2 ++ case F_PIC2: strcpy(lowsuf,"p2"); break; ++#endif } ++ if (allcaps) { /* upper-caseify lowsuf */ - for (sp=lowsuf; *sp; sp++) + for (sp=lowsuf; *sp; sp++) @@ -12363,7 +19698,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /* one other case: if the original suffix started with a single capital letter, make the new suffix start with a single cap */ if (isupper(suffix[0])) lowsuf[0] = toupper(lowsuf[0]); -@@ -1439,7 +1448,7 @@ +@@ -1439,7 +1668,7 @@ } } @@ -12372,7 +19707,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /***************************************************/ int DirCheckCD() -@@ -1462,7 +1471,7 @@ +@@ -1462,7 +1691,7 @@ static int FNameCdable() { /* returns '1' if filename is a directory, and goes there */ @@ -12381,7 +19716,19 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c char newpath[1024]; struct stat st; int retval = 0; -@@ -1518,7 +1527,7 @@ +@@ -1490,6 +1719,11 @@ + } + #endif + ++#ifdef AUTO_EXPAND ++ Mkvdir(newpath); ++ Dirtovd(newpath); ++#endif ++ + if (stat(newpath, &st)==0) { + int isdir; + +@@ -1518,7 +1752,7 @@ retval = 1; } } @@ -12390,16 +19737,24 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c return retval; } -@@ -1550,7 +1559,7 @@ +@@ -1549,8 +1783,8 @@ + *up='\0'; if (*uname=='\0') { /* no name. substitute ~ with $HOME */ - char *homedir; +- char *homedir; - homedir = (char *) getenv("HOME"); -+ homedir = (char *) getenv("HOME"); ++ const char *homedir; ++ homedir = (const char *) getenv("HOME"); if (homedir == NULL) homedir = "."; strcpy(tmp,homedir); strcat(tmp,sp); -@@ -1579,7 +1588,7 @@ +@@ -1574,12 +1808,12 @@ + + /***************************************/ + FILE *OpenOutFile(filename) +- char *filename; ++ const char *filename; + { /* opens file for output. does various error handling bits. Returns an open file pointer if success, NULL if failure */ @@ -12408,7 +19763,19 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c struct stat st; if (!filename || filename[0] == '\0') return NULL; -@@ -1596,23 +1605,34 @@ +@@ -1587,7 +1821,11 @@ + dopipe = 0; + + /* make sure we're in the correct directory */ ++#ifdef AUTO_EXPAND ++ if (strlen(path)) Chvdir(path); ++#else + if (strlen(path)) chdir(path); ++#endif + + if (ISPIPE(filename[0])) { /* do piping */ + /* make up some bogus temp file to put this in */ +@@ -1596,23 +1834,34 @@ #else strcpy(outFName, "[]xvXXXXXX.lis"); #endif @@ -12430,15 +19797,15 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c +#endif + /* see if file exists (i.e., we're overwriting) */ + if (stat(outFName, &st)==0) { /* stat succeeded, file must exist */ -+ static char *foo[] = { "\nOk", "\033Cancel" }; -+ char str[512]; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char str[512]; - sprintf(str,"Overwrite existing file '%s'?", outFName); - if (PopUp(str, foo, 2)) return NULL; - } - + sprintf(str,"Overwrite existing file '%s'?", outFName); -+ if (PopUp(str, foo, 2)) return NULL; ++ if (PopUp(str, labels, 2)) return NULL; + } + + @@ -12453,7 +19820,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (!fp) { char str[512]; sprintf(str,"Can't write file '%s'\n\n %s.",outFName, ERRSTR(errno)); -@@ -1622,7 +1642,7 @@ +@@ -1622,12 +1871,12 @@ return fp; } @@ -12462,7 +19829,13 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /***************************************/ int CloseOutFile(fp, filename, failed) -@@ -1642,9 +1662,8 @@ + FILE *fp; +- char *filename; ++ const char *filename; + int failed; + { + char buf[64]; +@@ -1642,9 +1891,8 @@ return 1; } @@ -12473,7 +19846,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c char str[512]; sprintf(str,"Can't close file '%s'\n\n %s.",outFName, ERRSTR(errno)); ErrPopUp(str, "\nWeird!"); -@@ -1666,7 +1685,7 @@ +@@ -1666,7 +1914,7 @@ } SetISTR(ISTR_INFO,"Successfully wrote '%s'%s", outFName, buf); @@ -12482,7 +19855,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (dopipe) { char cmd[512], str[1024]; int i; -@@ -1709,7 +1728,7 @@ +@@ -1709,7 +1957,7 @@ return 0; } @@ -12491,7 +19864,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c static byte rBW[2], gBW[2], bBW[2]; -@@ -1732,7 +1751,7 @@ +@@ -1732,7 +1980,7 @@ bwpic = (byte *) NULL; *nc = numcols; *rpp = rMap; *gpp = gMap; *bpp = bMap; @@ -12500,7 +19873,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c complicated 'reduced'/dithered/smoothed business comes into play. 'reduced' is disabled, for semi-obvious reasons, in 24-bit mode, as is 'dithered'. If 'smoothed', and we're saving at current -@@ -1744,32 +1763,32 @@ +@@ -1744,32 +1992,32 @@ if we're saving B/W DITHERED, and deal accordingly */ @@ -12541,7 +19914,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /* ptype == PIC8 ... */ -@@ -1777,7 +1796,7 @@ +@@ -1777,7 +2025,7 @@ *nc = numcols; *rpp = rMap; *gpp = gMap; *bpp = bMap; if (color==F_REDUCED) { *rpp = rdisp; *gpp = gdisp; *bpp = bdisp; } @@ -12550,7 +19923,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c make color=REDUCED, so it will be written with the correct colortable */ if ((epicMode == EM_DITH || epicMode == EM_SMOOTH) && color != F_REDUCED) { -@@ -1789,7 +1808,7 @@ +@@ -1789,7 +2037,7 @@ *rpp = gray; *gpp = gray; *bpp = gray; } } @@ -12559,7 +19932,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c -@@ -1823,8 +1842,8 @@ +@@ -1823,8 +2071,8 @@ * and whether or not it should be freed when we're done with it. The 'pic' * returned is the desired portion of 'cpic' or 'epic' if there is a * selection, and the saveselCB is enabled, or alternately, it's the @@ -12570,7 +19943,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c * if selection does not intersect cpic/epic, returns cpic/epic * NEVER RETURNS NULL */ -@@ -1837,7 +1856,7 @@ +@@ -1837,7 +2085,7 @@ if (savenormCB.val) { thepic = cpic; pw = cWIDE; ph = cHIGH; } else { thepic = epic; pw = eWIDE; ph = eHIGH; } @@ -12579,7 +19952,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (saveselCB.active && saveselCB.val && HaveSelection()) { -@@ -1862,7 +1881,7 @@ +@@ -1862,7 +2110,7 @@ CoordP2E(x2,y2, &x2, &y2); slx = x1; sly = y1; slw = x2-x1; slh = y2-y1; CropRect2Rect(&slx, &sly, &slw, &slh, 0,0,pw,ph); @@ -12588,7 +19961,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (slw<1 || slh<1) { slx = sly = 0; slw=pw; slh=ph; } if (slx!=0 || sly!=0 || slw!=pw || slh!=ph) { -@@ -1871,7 +1890,7 @@ +@@ -1871,7 +2119,7 @@ } } @@ -12597,7 +19970,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c } return thepic; -@@ -1884,11 +1903,11 @@ +@@ -1884,11 +2132,11 @@ byte **rmapP, **gmapP, **bmapP; { /* handles the whole ugly mess of the various save options. @@ -12611,7 +19984,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c */ byte *pic1, *pic2; -@@ -1896,9 +1915,9 @@ +@@ -1896,9 +2144,9 @@ pic1 = handleNormSel(&ptype, &w, &h, &pfree); @@ -12623,7 +19996,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (pfree) free(pic1); pic1 = pic2; pfree = 1; -@@ -1906,7 +1925,7 @@ +@@ -1906,7 +2154,7 @@ } @@ -12632,7 +20005,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c pic2 = GammifyPic24(pic1, w, h); if (pic2) { if (pfree) free(pic1); -@@ -1920,7 +1939,7 @@ +@@ -1920,7 +2168,7 @@ return pic1; } @@ -12641,7 +20014,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c /***************************************/ void GetSaveSize(wP, hP) int *wP, *hP; -@@ -1947,7 +1966,7 @@ +@@ -1947,7 +2195,7 @@ CoordP2E(x2,y2, &x2, &y2); slx = x1; sly = y1; slw = x2-x1; slh = y2-y1; CropRect2Rect(&slx, &sly, &slw, &slh, 0,0,eWIDE,eHIGH); @@ -12650,16 +20023,18 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c if (slw<1 || slh<1) { slx = sly = 0; slw=eWIDE; slh=eHIGH; } } } -@@ -1982,7 +2001,7 @@ +@@ -1982,8 +2230,8 @@ if (stat(namelist[curname], &origStat)==0) { haveStat = 1; - if (DEBUG) fprintf(stderr," origStat.size=%ld, origStat.mtime=%d\n", +- origStat.st_size, origStat.st_mtime); + if (DEBUG) fprintf(stderr," origStat.size=%ld, origStat.mtime=%ld\n", - origStat.st_size, origStat.st_mtime); ++ (long)origStat.st_size, (long)origStat.st_mtime); } } -@@ -1993,7 +2012,7 @@ + } +@@ -1993,7 +2241,7 @@ int CheckPoll(del) int del; { @@ -12668,13 +20043,14 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c A) the file has stabilized (st = lastStat), or B) 'del' seconds have gone by since the file last changed size */ -@@ -2007,14 +2026,14 @@ +@@ -2007,14 +2255,14 @@ (strcmp(namelist[curname], STDINSTR)!=0)) { if (stat(namelist[curname], &st)==0) { - if (DEBUG) fprintf(stderr," st.size=%ld, st.mtime=%d\n", +- st.st_size, st.st_mtime); + if (DEBUG) fprintf(stderr," st.size=%ld, st.mtime=%ld\n", - st.st_size, st.st_mtime); ++ (long)st.st_size, (long)st.st_mtime); if ((st.st_size == origStat.st_size) && (st.st_mtime == origStat.st_mtime)) return 0; /* no change */ @@ -12685,7 +20061,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c st.st_size != lastStat.st_size || st.st_mtime != lastStat.st_mtime) { xvbcopy((char *) &st, (char *) &lastStat, sizeof(struct stat)); -@@ -2031,7 +2050,7 @@ +@@ -2031,7 +2279,7 @@ } } } @@ -12694,7 +20070,7 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c return 0; } -@@ -2042,14 +2061,13 @@ +@@ -2042,14 +2290,13 @@ { /* called when file 'name' has been deleted. If any of the browsers were showing the directory that the file was in, does a rescan() */ @@ -12704,26 +20080,253 @@ diff -ruN xv-3.10a/xvdir.c xv-3.10a-bugfixes/xvdir.c char buf[MAXPATHLEN + 2], *tmp; strcpy(buf, name); - tmp = BaseName(buf); +- tmp = BaseName(buf); ++ tmp = (char *) BaseName(buf); /* intentionally losing constness */ *tmp = '\0'; /* truncate after last '/' */ - + if (strcmp(path, buf)==0) LoadCurrentDirectory(); } -diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c +@@ -2062,3 +2309,164 @@ + } + + ++#ifdef HAVE_PIC2 ++/**** Stuff for PIC2Dialog box ****/ ++FILE *pic2_OpenOutFile(filename, append) ++char *filename; ++int *append; ++{ ++ /* opens file for output. does various error handling bits. Returns ++ an open file pointer if success, NULL if failure */ ++ ++ FILE *fp = NULL; ++ struct stat st; ++ ++ if (!filename || filename[0] == '\0') ++ return (NULL); ++ strcpy(outFName, filename); ++ dopipe = 0; ++ ++ /* make sure we're in the correct directory */ ++#ifdef AUTO_EXPAND ++ if (strlen(path)) Chvdir(path); ++#else ++ if (strlen(path)) chdir(path); ++#endif ++ ++ if (ISPIPE(filename[0])) { /* do piping */ ++ /* make up some bogus temp file to put this in */ ++#ifndef VMS ++ sprintf(outFName, "%s/xvXXXXXX", tmpdir); ++#else ++ strcpy(outFName, "[]xvXXXXXX.lis"); ++#endif ++#ifdef USE_MKSTEMP ++ fp = fdopen(mkstemp(outFName), "w"); ++#else ++ mktemp(outFName); ++#endif ++ dopipe = 1; ++ } ++ ++ ++ /* see if file exists (i.e., we're overwriting) */ ++ *append = 0; ++#ifdef USE_MKSTEMP ++ if (!dopipe) ++#endif ++ if (stat(outFName, &st)==0) { /* stat succeeded, file must exist */ ++ if (ReadFileType(outFName) != RFT_PIC2) { ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char str[512]; ++ ++ sprintf(str,"Overwrite existing file '%s'?", outFName); ++ if (PopUp(str, labels, 2)) ++ return (NULL); ++ } else { ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char str[512]; ++ ++ sprintf(str,"Append to existing file '%s'?", outFName); ++ if (PopUp(str, labels, 2)) { ++ sprintf(str,"Overwrite existing file '%s'?", outFName); ++ if (PopUp(str, labels, 2)) ++ return (NULL); ++ } else ++ *append = 1; ++ } ++ } ++ ++ /* Open file */ ++#ifdef USE_MKSTEMP ++ if (!dopipe) ++#endif ++ fp = *append ? fopen(outFName, "r+") : fopen(outFName, "w"); ++ if (!fp) { ++ char str[512]; ++ sprintf(str,"Can't write file '%s'\n\n %s.",outFName, ERRSTR(errno)); ++ ErrPopUp(str, "\nBummer"); ++ return (NULL); ++ } ++ ++ return (fp); ++} ++ ++ ++/***************************************/ ++void pic2_KillNullFile(fp) ++FILE *fp; ++{ ++ fseek(fp, (size_t) 0, SEEK_END); ++ if (ftell(fp) > 0) { ++ fclose(fp); ++ return; ++ } else { ++ fclose(fp); ++ unlink(outFName); ++ return; ++ } ++} ++#endif /* HAVE_PIC2 */ ++ ++ ++#ifdef HAVE_MGCSFX ++/**** Stuff for MGCSFX Dialog box ****/ ++/***************************************/ ++int OpenOutFileDesc(filename) ++ char *filename; ++{ ++ /* opens file for output. does various error handling bits. Returns ++ an open file pointer if success, NULL if failure */ ++ ++ int fd; ++ struct stat st; ++ ++ if (!filename || filename[0] == '\0') return -1; ++ strcpy(outFName, filename); ++ dopipe = 0; ++ ++ /* make sure we're in the correct directory */ ++#ifdef AUTO_EXPAND ++ if (strlen(path)) Chvdir(path); ++#else ++ if (strlen(path)) chdir(path); ++#endif ++ ++ if (ISPIPE(filename[0])) { /* do piping */ ++ /* make up some bogus temp file to put this in */ ++#ifndef VMS ++ sprintf(outFName, "%s/xvXXXXXX", tmpdir); ++#else ++ strcpy(outFName, "[]xvXXXXXX.lis"); ++#endif ++#ifdef USE_MKSTEMP ++ close(mkstemp(outFName)); ++#else ++ mktemp(outFName); ++#endif ++ dopipe = 1; ++ } ++ ++ ++ /* if didn't just create it, see if file exists (i.e., we're overwriting) */ ++ if (!dopipe && stat(outFName, &st)==0) { /* stat succeeded, file exists */ ++ static const char *labels[] = { "\nOk", "\033Cancel" }; ++ char str[512]; ++ ++ sprintf(str,"Overwrite existing file '%s'?", outFName); ++ if (PopUp(str, labels, 2)) return -1; ++ } ++ ++ ++ /* Open file */ ++ fd = open(outFName, O_WRONLY | O_CREAT | O_TRUNC, (0644)); ++ if (fd < 0) { ++ char str[512]; ++ sprintf(str,"Can't write file '%s'\n\n %s.", outFName, ERRSTR(errno)); ++ ErrPopUp(str, "\nBummer"); ++ return -1; ++ } ++ ++ return fd; ++} ++#endif /* HAVE_MGCSFX */ +diff -ru xv-3.10a/xvevent.c xv-3.10a-enhancements/xvevent.c --- xv-3.10a/xvevent.c 1995-01-23 15:20:24.000000000 -0800 -+++ xv-3.10a-bugfixes/xvevent.c 2004-05-16 18:02:03.000000000 -0700 -@@ -101,15 +101,15 @@ ++++ xv-3.10a-enhancements/xvevent.c 2007-05-12 15:27:11.000000000 -0700 +@@ -39,8 +39,15 @@ + static Cursor dropper = 0, pen = 0, blur = 0; + + ++static void SelectDispMB PARM((int)); ++static void Select24to8MB PARM((int)); ++static void SelectRootMB PARM((int)); ++static void SelectWindowMB PARM((int)); ++static void SelectSizeMB PARM((int)); ++ ++static void DoPrint PARM((void)); + static void debugEvent PARM((XEvent *)); +-static char *win2name PARM((Window)); ++static const char *win2name PARM((Window)); + static void handleButtonEvent PARM((XEvent *, int *, int *)); + static void handleKeyEvent PARM((XEvent *, int *, int *)); + static void zoomCurs PARM((u_int)); +@@ -64,6 +71,8 @@ + + static void annotatePic PARM((void)); + ++static int debkludge_offx; ++static int debkludge_offy; + + /****************/ + int EventLoop() +@@ -71,13 +80,25 @@ + { + XEvent event; + int retval,done,waiting; +- time_t orgtime, curtime; ++#ifdef USE_TICKS ++ clock_t waitsec_ticks=0L, orgtime_ticks=0L, curtime_ticks; ++ clock_t elapsed_ticks=0L, remaining_interval; ++#else ++ time_t orgtime=0L, curtime; ++#endif + + + #ifndef NOSIGNAL + signal(SIGQUIT, onInterrupt); + #endif + ++ if (startGrab == 1) { ++ startGrab = 2; ++ FakeButtonPress(&but[BGRAB]); ++ FakeKeyPress(ctrlW, XK_Return); ++ return(1); ++ } ++ + /* note: there's no special event handling if we're using the root window. + if we're using the root window, we will recieve NO events for mainW */ + +@@ -100,18 +121,24 @@ + while (!done) { - if (waitsec > -1 && canstartwait && !waiting && XPending(theDisp)==0) { +- if (waitsec > -1 && canstartwait && !waiting && XPending(theDisp)==0) { - /* we wanna wait, we can wait, we haven't started waiting yet, and - all pending events (ie, drawing the image the first time) ++ if (waitsec >= 0.0 && canstartwait && !waiting && XPending(theDisp)==0) { + /* we wanna wait, we can wait, we haven't started waiting yet, and + all pending events (ie, drawing the image the first time) have been dealt with: START WAITING */ - time((time_t *) &orgtime); +- time((time_t *) &orgtime); ++#ifdef USE_TICKS ++ waitsec_ticks = (clock_t)(waitsec * CLK_TCK); ++ orgtime_ticks = times(NULL); /* unclear if NULL valid, but OK on Linux */ ++#else ++ orgtime = time(NULL); ++#endif waiting = 1; } @@ -12731,9 +20334,91 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c - /* if there's an XEvent pending *or* we're not doing anything + /* if there's an XEvent pending *or* we're not doing anything in real-time (polling, flashing the selection, etc.) get next event */ - if ((waitsec==-1 && !polling && !HaveSelection()) || XPending(theDisp)>0) { +- if ((waitsec==-1 && !polling && !HaveSelection()) || XPending(theDisp)>0) { ++ if ((waitsec<0.0 && !polling && !HaveSelection()) || XPending(theDisp)>0) ++ { XNextEvent(theDisp, &event); -@@ -187,7 +187,7 @@ + retval = HandleEvent(&event,&done); + } +@@ -121,7 +148,7 @@ + DrawSelection(0); + DrawSelection(1); + XFlush(theDisp); +- Timer(200); ++ Timer(200); /* milliseconds */ + } + + if (polling) { +@@ -129,13 +156,32 @@ + else if (!XPending(theDisp)) sleep(1); + } + +- if (waitsec>-1 && waiting) { +- time((time_t *) &curtime); +- if (curtime - orgtime < waitsec) sleep(1); +- else { +- if (waitloop) return NEXTLOOP; +- else return NEXTQUIT; +- } ++ if (waitsec>=0.0 && waiting) { ++#ifdef USE_TICKS ++ curtime_ticks = times(NULL); /* value in ticks */ ++ if (curtime_ticks < orgtime_ticks) { ++ /* clock ticks rolled over: need to correct for that (i.e., ++ * curtime_ticks is presumably quite small, while orgtime_ticks ++ * should be close to LONG_MAX, so do math accordingly--any way ++ * to check whether clock_t is *not* a signed long?) */ ++ elapsed_ticks = curtime_ticks + (LONG_MAX - orgtime_ticks); ++ } else ++ elapsed_ticks = curtime_ticks - orgtime_ticks; ++ remaining_interval = waitsec_ticks - elapsed_ticks; ++ if (remaining_interval >= (clock_t)(1 * CLK_TCK)) ++ sleep(1); ++ else { ++ /* less than one second remaining: do delay in msec, then return */ ++ Timer((remaining_interval * 1000L) / CLK_TCK); /* can't overflow */ ++ return waitloop? NEXTLOOP : NEXTQUIT; ++ } ++#else ++ curtime = time(NULL); /* value in seconds */ ++ if (curtime - orgtime < (time_t)waitsec) ++ sleep(1); ++ else ++ return waitloop? NEXTLOOP : NEXTQUIT; ++#endif + } + } + } /* while (!done) */ +@@ -154,7 +200,27 @@ + int *donep; + { + static int wasInfoUp=0, wasCtrlUp=0, wasDirUp=0, wasGamUp=0, wasPsUp=0; +- static int wasJpegUp=0, wasTiffUp=0; ++#ifdef HAVE_JPEG ++ static int wasJpegUp=0; ++#endif ++#ifdef HAVE_JP2K ++ static int wasJp2kUp=0; ++#endif ++#ifdef HAVE_TIFF ++ static int wasTiffUp=0; ++#endif ++#ifdef HAVE_PNG ++ static int wasPngUp=0; ++#endif ++#ifdef HAVE_PCD ++ static int wasPcdUp=0; ++#endif ++#ifdef HAVE_PIC2 ++ static int wasPic2Up=0; ++#endif ++#ifdef HAVE_MGCSFX ++ static int wasMgcSfxUp=0; ++#endif + + static int mainWKludge=0; /* force first mainW expose after a mainW config + to redraw all of mainW */ +@@ -187,7 +253,7 @@ #ifdef VMS static int borders_sized = 0; @@ -12742,7 +20427,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (!borders_sized && !useroot && exp_event->window == mainW) { /* * Initial expose of main window, find the size of the ancestor -@@ -198,13 +198,13 @@ +@@ -198,13 +264,13 @@ int status, count, mwid, mhgt, x, y, w, h, b, d, mbrd; Window root, parent, *children, crw = exp_event->window; borders_sized = 1; @@ -12759,7 +20444,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c &children, &count ); if ( children != NULL ) XFree ( children ); } -@@ -221,7 +221,7 @@ +@@ -221,7 +287,7 @@ win = exp_event->window; x = exp_event->x; y = exp_event->y; w = exp_event->width; h = exp_event->height; @@ -12768,7 +20453,42 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (PUCheckEvent (event)) break; /* event has been processed */ if (PSCheckEvent (event)) break; /* event has been processed */ -@@ -238,7 +238,7 @@ +@@ -229,16 +295,42 @@ + if (JPEGCheckEvent(event)) break; /* event has been processed */ + #endif + ++#ifdef HAVE_JP2K ++ if (JP2KCheckEvent(event)) break; /* event has been processed */ ++#endif ++ + #ifdef HAVE_TIFF + if (TIFFCheckEvent(event)) break; /* event has been processed */ + #endif + ++#ifdef HAVE_PNG ++ if (PNGCheckEvent (event)) break; /* event has been processed */ ++#endif ++ ++ if (PCDCheckEvent(event)) break; /* event has been processed */ ++ ++#ifdef HAVE_PIC2 ++ if (PIC2CheckEvent(event)) break; /* event has been processed */ ++#endif ++ ++#ifdef HAVE_PCD ++ if (PCDCheckEvent (event)) break; /* event has been processed */ ++#endif ++ ++#ifdef HAVE_MGCSFX ++ if (MGCSFXCheckEvent(event)) break; /* event has been processed */ ++#endif ++ ++#ifdef TV_MULTILINGUAL ++ if (CharsetCheckEvent(event)) break; /* event has been processed */ ++#endif ++ + if (GamCheckEvent (event)) break; /* event has been processed */ + if (BrowseCheckEvent (event, &retval, &done)) break; /* event eaten */ if (TextCheckEvent (event, &retval, &done)) break; /* event eaten */ /* if the window doesn't do intelligent redraw, drop but last expose */ @@ -12777,7 +20497,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c win != mainW && win != ctrlW && win != dirW && win != infoW) break; -@@ -301,7 +301,7 @@ +@@ -301,7 +393,7 @@ if (DEBUG) fprintf(stderr,"No configs pending.\n"); /* if (DEBUG) XClearArea(theDisp, mainW, x,y,w,h, False); */ DrawWindow(x,y,w,h); @@ -12786,7 +20506,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (HaveSelection()) DrawSelection(0); canstartwait = 1; /* finished drawing */ -@@ -314,7 +314,7 @@ +@@ -314,7 +406,7 @@ else if (win == infoW) RedrawInfo(x,y,w,h); else if (win == ctrlW) RedrawCtrl(x,y,w,h); else if (win == dirW) RedrawDirW(x,y,w,h); @@ -12795,7 +20515,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XSetClipMask(theDisp, theGC, None); XDestroyRegion(reg); } -@@ -324,10 +324,10 @@ +@@ -324,10 +416,10 @@ else if (win == dList.win) LSRedraw(&dList,0); else if (win == dList.scrl.win) SCRedraw(&dList.scrl); else if (win == dnamW) RedrawDNamW(); @@ -12808,27 +20528,78 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c case ClientMessage: { Atom proto, delwin; -@@ -382,8 +382,8 @@ +@@ -344,6 +436,9 @@ + + if (BrowseDelWin(client_event->window)) break; + if (TextDelWin(client_event->window)) break; ++#ifdef TV_MULTILINGUAL ++ if (CharsetDelWin(client_event->window)) break; ++#endif + + if (client_event->window == infoW) InfoBox(0); + else if (client_event->window == gamW) GamBox(0); +@@ -355,10 +450,32 @@ + else if (client_event->window == jpegW) JPEGDialog(0); + #endif + ++#ifdef HAVE_JP2K ++ else if (client_event->window == jp2kW) JP2KDialog(0); ++#endif ++ + #ifdef HAVE_TIFF + else if (client_event->window == tiffW) TIFFDialog(0); + #endif + ++#ifdef HAVE_PNG ++ else if (client_event->window == pngW) PNGDialog(0); ++#endif ++ ++ else if (client_event->window == pcdW) PCDDialog(0); ++ ++#ifdef HAVE_PIC2 ++ else if (client_event->window == pic2W) PIC2Dialog(0); ++#endif ++ ++#ifdef HAVE_PCD ++ else if (client_event->window == pcdW) PCDDialog(0); ++#endif ++ ++#ifdef HAVE_MGCSFX ++ else if (client_event->window == mgcsfxW) MGCSFXDialog(0); ++#endif ++ + else if (client_event->window == mainW) Quit(0); + } + } +@@ -381,31 +498,35 @@ + if (win==ctrlW || win==gamW || win==infoW || win==mainW || win==dirW) { XSizeHints hints; ++#define BAD_IDEA ++#ifdef BAD_IDEA /* - * if there's a virtual window manager running (e.g. tvtwm / olvwm), - * we're going to get 'cevt' values in terms of the -+ * if there's a virtual window manager running (e.g. tvtwm / olvwm), ++ * if there is a virtual window manager running (e.g., tvtwm / olvwm), + * we're going to get 'cevt' values in terms of the * 'real' root window (the one that is the size of the screen). * We'll want to translate them into values that are in terms of * the 'virtual' root window (the 'big' one) -@@ -392,7 +392,7 @@ + */ + if (vrootW != rootW) { - int x1,y1; Window child; +- int x1,y1; Window child; ++ int x1,y1; ++ Window child; - XTranslateCoordinates(theDisp, rootW, vrootW, cevt->x, cevt->y, + XTranslateCoordinates(theDisp, rootW, vrootW, cevt->x, cevt->y, &x1, &y1, &child); if (DEBUG) fprintf(stderr," CONFIG trans %d,%d root -> %d,%d vroot\n", cevt->x, cevt->y, x1, y1); -@@ -401,11 +401,11 @@ + cevt->x = x1; cevt->y = y1; + } ++#endif #ifndef VMS /* read hints for this window and adjust any position hints, but @@ -12842,7 +20613,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XGetNormalHints(theDisp, cevt->window, &hints)) { if (DEBUG) fprintf(stderr," CONFIG got hints (0x%x %d,%d)\n", -@@ -439,11 +439,11 @@ +@@ -439,11 +560,11 @@ * This sucks! * * So, if we have just loaded an image, and we get a Synthetic conf @@ -12856,7 +20627,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c * ignoring them won't be a big performance problem, and it'll get * around the 'I only got one config in the wrong size' problem when * initially displaying small images -@@ -453,7 +453,7 @@ +@@ -453,7 +574,7 @@ /* fprintf(stderr,"***mainw, ignore=%d, send_event=%d, evtSize=%d,%d, size=%d,%d\n", ignoreConfigs, cevt->send_event, cevt->width, cevt->height, eWIDE, eHIGH); */ @@ -12865,7 +20636,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c (cevt->width != eWIDE || cevt->height != eHIGH)) { ignoreConfigs=0; /* ignore this one only */ break; -@@ -470,7 +470,7 @@ +@@ -470,7 +591,7 @@ else { XEvent xev; if (DEBUG) fprintf(stderr,"No configs pend."); @@ -12874,7 +20645,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (cevt->width == eWIDE && cevt->height == eHIGH) { if (DEBUG) fprintf(stderr,"No redraw\n"); } -@@ -478,12 +478,12 @@ +@@ -478,12 +599,12 @@ if (DEBUG) fprintf(stderr,"Do full redraw\n"); Resize(cevt->width, cevt->height); @@ -12889,7 +20660,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c fprintf(stderr," ate expose (%s) (count=%d) %d,%d %dx%d\n", exp->send_event ? "synth" : "real", exp->count, exp->x, exp->y, exp->width, exp->height); -@@ -508,9 +508,9 @@ +@@ -508,9 +629,9 @@ } break; @@ -12901,7 +20672,33 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c case CirculateNotify: case DestroyNotify: case GravityNotify: break; -@@ -554,7 +554,7 @@ +@@ -534,10 +655,24 @@ + #ifdef HAVE_JPEG + if (wasJpegUp) { JPEGDialog(wasJpegUp); wasJpegUp=0; } + #endif +- ++#ifdef HAVE_JP2K ++ if (wasJp2kUp) { JP2KDialog(wasJpegUp); wasJp2kUp=0; } ++#endif + #ifdef HAVE_TIFF + if (wasTiffUp) { TIFFDialog(wasTiffUp); wasTiffUp=0; } + #endif ++#ifdef HAVE_PNG ++ if (wasPngUp) { PNGDialog(wasPngUp); wasPngUp=0; } ++#endif ++#ifdef HAVE_PCD ++ if (wasPcdUp) { PCDDialog(wasPcdUp); wasPcdUp=0; } ++#endif ++#ifdef HAVE_PIC2 ++ if (wasPic2Up) { PIC2Dialog(wasPic2Up); wasPic2Up=0; } ++#endif ++#ifdef HAVE_MGCSFX ++ if (wasMgcSfxUp) { MGCSFXDialog(wasMgcSfxUp); wasMgcSfxUp=0; } ++#endif + } + } + } +@@ -554,7 +689,7 @@ /* don't do it if we've just switched to a root mode */ if ((unmap_event->window == mainW && dispMode == 0) || @@ -12910,7 +20707,33 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (autoclose) { if (autoclose>1) autoclose -= 2; /* grab kludge */ -@@ -586,8 +586,8 @@ +@@ -572,10 +707,24 @@ + #ifdef HAVE_JPEG + if (jpegUp) { wasJpegUp = jpegUp; JPEGDialog(0); } + #endif +- ++#ifdef HAVE_JP2K ++ if (jp2kUp) { wasJp2kUp = jp2kUp; JP2KDialog(0); } ++#endif + #ifdef HAVE_TIFF + if (tiffUp) { wasTiffUp = tiffUp; TIFFDialog(0); } + #endif ++#ifdef HAVE_PNG ++ if (pngUp) { wasPngUp = pngUp; PNGDialog(0); } ++#endif ++#ifdef HAVE_PCD ++ if (pcdUp) { wasPcdUp = pcdUp; PCDDialog(0); } ++#endif ++#ifdef HAVE_PIC2 ++ if (pic2Up) { wasPic2Up = pic2Up; PIC2Dialog(0); } ++#endif ++#ifdef HAVE_MGCSFX ++ if (mgcsfxUp) { wasMgcSfxUp = mgcsfxUp; MGCSFXDialog(0); } ++#endif + } + } + } +@@ -586,8 +735,8 @@ XReparentEvent *reparent_event = (XReparentEvent *) event; if (DEBUG) { @@ -12921,7 +20744,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c (u_int) reparent_event->event, (u_int) reparent_event->parent); fprintf(stderr,"%d,%d\n", reparent_event->x, reparent_event->y); } -@@ -598,7 +598,7 @@ +@@ -598,7 +747,7 @@ p_offx = p_offy = 0; /* topleft correction for WMs titlebar */ @@ -12930,7 +20753,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c /* looks like the user is running MWM or OLWM */ XWindowAttributes xwa; -@@ -609,8 +609,8 @@ +@@ -609,8 +758,8 @@ XSync(theDisp, False); XGetWindowAttributes(theDisp, mainW, &xwa); @@ -12941,7 +20764,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c fprintf(stderr,"XGetAttr: mainW %d,%d %dx%d\n", xwa.x, xwa.y, xwa.width, xwa.height); -@@ -620,8 +620,8 @@ +@@ -620,8 +769,8 @@ XSync(theDisp, False); XGetWindowAttributes(theDisp, reparent_event->parent, &xwa); @@ -12952,29 +20775,65 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c fprintf(stderr,"XGetAttr: parent %d,%d %dx%d\n", xwa.x, xwa.y, xwa.width, xwa.height); } -@@ -641,42 +641,42 @@ +@@ -641,42 +790,75 @@ p_offy = xwa.y; } - ++ /* Gather info to keep right border inside */ ++ { ++ Window current; ++ Window root_r; ++ Window parent_r; ++ Window *children_r; ++ unsigned int nchildren_r; ++ XWindowAttributes xwa; ++ ++ parent_r=mainW; ++ current=mainW; ++ do { ++ current=parent_r; ++ XQueryTree(theDisp, current, &root_r, &parent_r, ++ &children_r, &nchildren_r); ++ if (children_r!=NULL) { ++ XFree(children_r); ++ } ++ } while (parent_r!=root_r && parent_r!=vrootW); ++ XGetWindowAttributes(theDisp, current, &xwa); ++ debkludge_offx = eWIDE-xwa.width+p_offx; ++ debkludge_offy = eHIGH-xwa.height+p_offy; ++ } + ++#if 0 ++ /* FIXME: if we want to do this, we first have to wait for a configure ++ * notify to avoid a race condition because the location might be in- ++ * correct if the window manager does placement after managing the window. ++ */ /* move window around a bit... */ { XWindowAttributes xwa; ++ GetWindowPos(&xwa); ++ //fprintf(stderr, "RAC: orig window pos %d,%d\n", xwa.x, xwa.y); ++ xwa.width = eWIDE; xwa.height = eHIGH; - ++ //fprintf(stderr, "RAC: image size now %d,%d\n", xwa.width, xwa.height); + /* try to keep the damned thing on-screen, if possible */ - if (xwa.x + xwa.width > dispWIDE) xwa.x = dispWIDE - xwa.width; - if (xwa.y + xwa.height > dispHIGH) xwa.y = dispHIGH - xwa.height; +- if (xwa.x + xwa.width > dispWIDE) xwa.x = dispWIDE - xwa.width; +- if (xwa.y + xwa.height > dispHIGH) xwa.y = dispHIGH - xwa.height; ++ if (xwa.x + xwa.width > vrWIDE) xwa.x = vrWIDE - xwa.width; ++ if (xwa.y + xwa.height > vrHIGH) xwa.y = vrHIGH - xwa.height; if (xwa.x < 0) xwa.x = 0; if (xwa.y < 0) xwa.y = 0; - + ++ //fprintf(stderr, "RAC: moving window to %d,%d\n", xwa.x, xwa.y); SetWindowPos(&xwa); } - +- ++#endif } } break; @@ -13002,7 +20861,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XUninstallColormap(theDisp,LocalCmap); } } -@@ -685,12 +685,12 @@ +@@ -685,12 +867,12 @@ case SelectionClear: break; @@ -13017,7 +20876,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c xsrevt->selection != XA_PRIMARY || xsrevt->target != XA_STRING) { /* can't do it. */ xse.property = None; -@@ -702,7 +702,7 @@ +@@ -702,7 +884,7 @@ if (xse.property != None) { xerrcode = 0; XChangeProperty(theDisp, xsrevt->requestor, xse.property, @@ -13026,7 +20885,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c (byte *) ((xevPriSel) ? xevPriSel : "\0"), (int) ((xevPriSel) ? strlen(xevPriSel)+1 : 1)); XSync(theDisp, False); -@@ -721,9 +721,9 @@ +@@ -721,9 +903,9 @@ XSync(theDisp, False); } break; @@ -13039,7 +20898,12 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c default: break; /* ignore unexpected events */ } /* switch */ -@@ -738,7 +738,7 @@ +@@ -734,11 +916,11 @@ + + + /***********************************/ +-void SelectDispMB(i) ++static void SelectDispMB(i) int i; { /* called to handle selection of a dispMB item */ @@ -13048,7 +20912,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (i<0 || i>=DMB_MAX) return; if (dispMB.dim[i]) return; /* disabled */ -@@ -747,36 +747,36 @@ +@@ -747,36 +929,36 @@ if (i==DMB_RAW) epicMode = EM_RAW; else if (i==DMB_DITH) epicMode = EM_DITH; else epicMode = EM_SMOOTH; @@ -13098,7 +20962,12 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c break; } } -@@ -788,17 +788,17 @@ +@@ -784,27 +966,27 @@ + + + /***********************************/ +-void SelectRootMB(i) ++static void SelectRootMB(i) int i; { /* called to handle selection of a rootMB item */ @@ -13119,7 +20988,14 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c HandleDispMode(); } -@@ -818,25 +818,25 @@ + + /***********************************/ +-void Select24to8MB(i) ++static void Select24to8MB(i) + int i; + { + if (i<0 || i>=CONV24_MAX) return; +@@ -818,25 +1000,25 @@ else if (i==CONV24_24BIT && state824==1) { /* went 24->8->24 */ char buf[512]; @@ -13150,7 +21026,16 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c else if (i>=CONV24_FAST && i<=CONV24_BEST) { conv24 = i; for (i=CONV24_FAST; i<=CONV24_BEST; i++) { -@@ -859,15 +859,15 @@ +@@ -847,7 +1029,7 @@ + + + /***********************************/ +-void SelectWindowMB(i) ++static void SelectWindowMB(i) + int i; + { + if (i<0 || i>=WMB_MAX) return; +@@ -859,15 +1041,15 @@ else chdir(initdir); OpenBrowse(); break; @@ -13170,7 +21055,16 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c case WMB_TEXTVIEW: textViewCmd(); break; case WMB_ABOUTXV: ShowLicense(); break; case WMB_KEYHELP: ShowKeyHelp(); break; -@@ -892,19 +892,19 @@ +@@ -878,7 +1060,7 @@ + + + /***********************************/ +-void SelectSizeMB(i) ++static void SelectSizeMB(i) + int i; + { + int w,h; +@@ -892,19 +1074,19 @@ double r,wr,hr; wr = ((double) cWIDE) / maxWIDE; hr = ((double) cHIGH) / maxHIGH; @@ -13193,7 +21087,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c { int w1,h1; w1 = eWIDE; h1 = eHIGH; -@@ -925,24 +925,24 @@ +@@ -925,24 +1107,24 @@ if (h==eHIGH) h++; WResize(w,h); break; @@ -13224,7 +21118,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (eWIDE >= cWIDE) { w = ((double) eWIDE) / cWIDE; w = floor(w + 0.5); -@@ -961,7 +961,7 @@ +@@ -961,7 +1143,7 @@ } w = pick; } @@ -13233,7 +21127,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (eHIGH >= cHIGH) { h = ((double) eHIGH) / cHIGH; h = floor(h + 0.5); -@@ -980,11 +980,11 @@ +@@ -980,25 +1162,26 @@ } h = pick; } @@ -13247,16 +21141,27 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c default: break; } } -@@ -998,7 +998,7 @@ - int i; - char txt[512], str[PRINTCMDLEN + 10]; - static char *labels[] = { " Color", " Grayscale", " B/W", "\033Cancel" }; + + + /***********************************/ +-void DoPrint() ++static void DoPrint() + { + /* pops open appropriate dialog boxes, issues print command */ + +- int i; +- char txt[512], str[PRINTCMDLEN + 10]; +- static char *labels[] = { " Color", " Grayscale", " B/W", "\033Cancel" }; - ++ int i; ++ char txt[512], str[PRINTCMDLEN + 10]; ++ static const char *labels[] = { "\03Color", "\07Grayscale", " B/W", "\033Cancel" }; ++ /* ^B ("\02") already used for moving cursor back */ + strcpy(txt, "Print: Enter a command that will read a PostScript file "); strcat(txt, "from stdin and print it to the desired printer.\n\n"); #ifndef VMS -@@ -1011,11 +1011,11 @@ +@@ -1011,11 +1194,11 @@ if (i == 3 || strlen(printCmd)==0) return; /* CANCEL */ if (dirUp == BLOAD) DirBox(0); @@ -13270,7 +21175,12 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c sprintf(str, "| %s", printCmd); else strcpy(str, printCmd); -@@ -1090,7 +1090,7 @@ +@@ -1086,11 +1269,11 @@ + } + } + +-static char *win2name(win) ++static const char *win2name(win) Window win; { static char foo[16]; @@ -13279,7 +21189,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (win == mainW) return "mainW"; else if (win == rootW) return "rootW"; else if (win == vrootW) return "vrootW"; -@@ -1106,7 +1106,7 @@ +@@ -1106,7 +1289,7 @@ } } @@ -13288,7 +21198,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c /***********************************/ static void handleButtonEvent(event, donep, retvalp) XEvent *event; -@@ -1127,38 +1127,36 @@ +@@ -1127,38 +1310,60 @@ case ButtonPress: /* *always* check for pop-up events, as errors can happen... */ if (PUCheckEvent (event)) break; @@ -13314,11 +21224,35 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c #endif - + ++#ifdef HAVE_JP2K ++ if (JP2KCheckEvent(event)) break; ++#endif ++ #ifdef HAVE_TIFF if (TIFFCheckEvent(event)) break; #endif - + ++#ifdef HAVE_PNG ++ if (PNGCheckEvent (event)) break; ++#endif ++ ++#ifdef HAVE_PCD ++ if (PCDCheckEvent (event)) break; /* event has been processed */ ++#endif ++ ++#ifdef HAVE_PIC2 ++ if (PIC2CheckEvent(event)) break; ++#endif ++ ++#ifdef HAVE_MGCSFX ++ if (MGCSFXCheckEvent(event)) break; ++#endif ++ ++#ifdef TV_MULTILINGUAL ++ if (CharsetCheckEvent(event)) break; ++#endif ++ if (GamCheckEvent (event)) break; if (BrowseCheckEvent (event, &retval, &done)) break; if (TextCheckEvent (event, &retval, &done)) break; @@ -13338,7 +21272,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (MBClick(&dispMB, x,y)) SelectDispMB (MBTrack(&dispMB) ); else if (MBClick(&conv24MB, x,y)) Select24to8MB (MBTrack(&conv24MB)); else if (MBClick(&rootMB, x,y)) SelectRootMB (MBTrack(&rootMB) ); -@@ -1170,9 +1168,9 @@ +@@ -1170,9 +1375,9 @@ if (i>=0) DoAlg(i); break; } @@ -13350,7 +21284,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c switch (i) { case BNEXT: retval= NEXTPIC; done=1; break; case BPREV: retval= PREVPIC; done=1; break; -@@ -1192,21 +1190,21 @@ +@@ -1192,21 +1397,21 @@ case BROTR: Rotate(0); break; case BFLIPH: Flip(0); break; case BFLIPV: Flip(1); break; @@ -13378,7 +21312,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c break; case BANNOT: annotatePic(); break; -@@ -1214,27 +1212,27 @@ +@@ -1214,85 +1419,127 @@ case BABOUT: SelectWindowMB(WMB_ABOUTXV); break; case BXV: retval = DFLTPIC; done=1; break; case BQUIT: retval = QUIT; done=1; break; @@ -13411,10 +21345,21 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c + switch (i) { case S_BOK: if (dirUp == BLOAD) { - if (!DirCheckCD()) { -@@ -1246,53 +1244,53 @@ - DoSave(); - } +- if (!DirCheckCD()) { +- retval = LOADPIC; +- done=1; ++ if (!DirCheckCD()) { ++ retval = LOADPIC; ++ done=1; ++ } ++ } ++ else if (dirUp == BSAVE) { ++ DoSave(); + } +- } +- else if (dirUp == BSAVE) { +- DoSave(); +- } break; - + @@ -13459,6 +21404,48 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c break; - + ++ case Button4: /* note min vs. max, + vs. - */ ++ if (win == ctrlW || win == nList.win || win == nList.scrl.win) { ++ SCRL *sp=&nList.scrl; ++ int halfpage=sp->page/2; ++ ++ if (sp->val > sp->min+halfpage) ++ SCSetVal(sp,sp->val-halfpage); ++ else ++ SCSetVal(sp,sp->min); ++ } ++ else if (win == dirW || win == dList.win || win == dList.scrl.win) { ++ SCRL *sp=&dList.scrl; ++ int halfpage=sp->page/2; ++ ++ if (sp->val > sp->min+halfpage) ++ SCSetVal(sp,sp->val-halfpage); ++ else ++ SCSetVal(sp,sp->min); ++ } ++ break; ++ ++ case Button5: /* note max vs. min, - vs. + */ ++ if (win == ctrlW || win == nList.win || win == nList.scrl.win) { ++ SCRL *sp=&nList.scrl; ++ int halfpage=sp->page/2; ++ ++ if (sp->val < sp->max-halfpage) ++ SCSetVal(sp,sp->val+halfpage); ++ else ++ SCSetVal(sp,sp->max); ++ } ++ else if (win == dirW || win == dList.win || win == dList.scrl.win) { ++ SCRL *sp=&dList.scrl; ++ int halfpage=sp->page/2; ++ ++ if (sp->val < sp->max-halfpage) ++ SCSetVal(sp,sp->val+halfpage); ++ else ++ SCSetVal(sp,sp->max); ++ } ++ break; ++ default: break; } } @@ -13480,7 +21467,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XKeyEvent *key_event; KeySym ks; char buf[128]; -@@ -1306,26 +1304,26 @@ +@@ -1306,26 +1553,26 @@ switch (event->type) { case KeyRelease: if (viewonly) break; /* ignore all user input */ @@ -13514,7 +21501,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c case KeyPress: svkeystate = key_event->state; -@@ -1343,11 +1341,11 @@ +@@ -1343,11 +1590,11 @@ if (PUCheckEvent (event)) break; /* always check popups */ if (autoquit && key_event->window == mainW) Quit(0); @@ -13529,16 +21516,55 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (key_event->window == mainW) { u_int foo = key_event->state; -@@ -1371,7 +1369,7 @@ +@@ -1362,20 +1609,43 @@ + if (JPEGCheckEvent(event)) break; + #endif + ++#ifdef HAVE_JP2K ++ if (JP2KCheckEvent(event)) break; ++#endif ++ + #ifdef HAVE_TIFF + if (TIFFCheckEvent(event)) break; + #endif + ++#ifdef HAVE_PNG ++ if (PNGCheckEvent (event)) break; ++#endif ++ ++ if (PCDCheckEvent (event)) break; ++ ++#ifdef HAVE_PIC2 ++ if (PIC2CheckEvent(event)) break; ++#endif ++ ++#ifdef HAVE_PCD ++ if (PCDCheckEvent (event)) break; ++#endif ++ ++#ifdef HAVE_MGCSFX ++ if (MGCSFXCheckEvent(event)) break; ++#endif ++ + if (GamCheckEvent (event)) break; + if (BrowseCheckEvent (event, &retval, &done)) break; if (TextCheckEvent (event, &retval, &done)) break; - /* check for pageup/pagedown, 'p' in main window -+ /* check for pageup/pagedown, 'p' in main window - (you can use shift-up or shift-down if no crop rectangle drawn) - (for viewing multipage docs) */ - -@@ -1386,7 +1384,7 @@ +- (you can use shift-up or shift-down if no crop rectangle drawn) +- (for viewing multipage docs) */ ++ /* Support for multi-image files ("multipage docs"). Check for PgUp/PgDn ++ or 'p' in any window but control or directory; PgUp/PgDn are already ++ used to page through the file list in those windows. If no cropping ++ rectangle is active, shift-Up and shift-Down also work. */ + +- if (key_event->window == mainW) { ++ if (key_event->window != ctrlW && key_event->window != dirW) { + dealt = 1; + + ck = CursorKey(ks, shift, 0); +@@ -1386,7 +1656,7 @@ else XBell(theDisp,0); } @@ -13547,7 +21573,20 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c (ck==CK_DOWN && shift && !but[BCROP].active)) { if (strlen(pageBaseName) && numPages>1) { done = 1; retval = OP_PAGEDN; -@@ -1429,7 +1427,7 @@ +@@ -1396,9 +1666,9 @@ + + else if (buf[0] == 'p' && stlen>0) { + if (strlen(pageBaseName) && numPages>1) { +- int i,j, okay; +- char buf[64], txt[512]; +- static char *labels[] = { "\nOk", "\033Cancel" }; ++ int i,j, okay; ++ char buf[64], txt[512]; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; + + /* ask what page to go to */ + sprintf(txt, "Go to page number... (1-%d)", numPages); +@@ -1429,7 +1699,7 @@ if (dealt) break; } @@ -13556,7 +21595,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c /* check for crop rect keys */ -@@ -1468,7 +1466,7 @@ +@@ -1468,15 +1738,17 @@ if (theList == &dList && dealt) { /* changed dir selection */ SelectDir(-1); /* nothing was double-clicked */ } @@ -13565,7 +21604,20 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (dealt) break; } -@@ -1491,7 +1489,7 @@ + + /* check dir filename arrows */ +- ck = CursorKey(ks, shift, 1); +- if (key_event->window == dirW && ck==CK_LEFT) { DirKey('\002'); break; } +- if (key_event->window == dirW && ck==CK_RIGHT) { DirKey('\006'); break; } ++ if (key_event->window == dirW) { ++ ck = CursorKey(ks, shift, 1); ++ if (ck==CK_LEFT) { DirKey('\002'); break; } ++ if (ck==CK_RIGHT) { DirKey('\006'); break; } ++ } + + + /* check for preset keys (meta-1, meta-2, meta-3, meta-4, meta-0) +@@ -1491,7 +1763,7 @@ else if (ks==XK_2) FakeButtonPress(&gbut[G_B2]); else if (ks==XK_3) FakeButtonPress(&gbut[G_B3]); else if (ks==XK_4) FakeButtonPress(&gbut[G_B4]); @@ -13574,7 +21626,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c FakeButtonPress(&gbut[G_BRESET]); else if (ks==XK_x) FakeButtonPress(&but[BCUT]); -@@ -1521,7 +1519,7 @@ +@@ -1521,7 +1793,7 @@ else if (ks==XK_a) FakeButtonPress(&gbut[G_BAPPLY]); @@ -13583,12 +21635,39 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (picType==PIC8) Select24to8MB(CONV24_24BIT); else Select24to8MB(CONV24_8BIT); } -@@ -1530,20 +1528,20 @@ +@@ -1530,20 +1802,47 @@ if (dealt) break; } - + ++ /* Check for function keys */ ++ if (key_event->window == ctrlW || key_event->window == mainW) { ++ if (ks >= XK_F1 && ks <= XK_F1 + FSTRMAX - 1) { ++ int fkey = ks - XK_F1; ++ if (fkeycmds[fkey] && fullfname[0]) { ++#define CMDLEN 4096 ++ char cmd[CMDLEN]; ++ /* If a command begins with '@', we do not reload the current file */ ++ int noreload = (fkeycmds[fkey][0] == '@'); ++ int x = 0, y = 0, w = 0, h = 0; ++ if (HaveSelection()) ++ GetSelRCoords(&x, &y, &w, &h); ++ snprintf(cmd, CMDLEN, fkeycmds[fkey] + noreload, fullfname, x, y, w, h); ++#undef CMDLEN ++ if (DEBUG) fprintf(stderr, "Executing '%s'\n", cmd); ++ WaitCursor(); ++ system(cmd); ++ SetCursors(-1); ++ if (!noreload) { ++ retval = RELOAD; ++ done = 1; ++ } ++ break; ++ } ++ } ++ } ++ if (!stlen) break; - + @@ -13608,7 +21687,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c /* things in sizeMB */ case 'n': SelectSizeMB(SZMB_NORM); break; case 'm': SelectSizeMB(SZMB_MAXPIC); break; -@@ -1556,7 +1554,7 @@ +@@ -1556,7 +1855,7 @@ case 'a': SelectSizeMB(SZMB_ASPECT); break; case '4': SelectSizeMB(SZMB_4BY3); break; case 'I': SelectSizeMB(SZMB_INTEXP); break; @@ -13617,7 +21696,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c /* things in windowMB */ case '\026': case 'V': SelectWindowMB(WMB_BROWSE); break; /* ^V or V */ -@@ -1565,36 +1563,36 @@ +@@ -1565,36 +1864,36 @@ case '\003': SelectWindowMB(WMB_COMMENT); break; /* ^C */ case '\024': SelectWindowMB(WMB_TEXTVIEW); break; /* ^T */ case '\001': SelectWindowMB(WMB_ABOUTXV); break; /* ^A */ @@ -13641,16 +21720,18 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c } break; - -+ - case '\010': - case '\177': FakeButtonPress(&but[BPREV]); break; +- case '\010': +- case '\177': FakeButtonPress(&but[BPREV]); break; - - + ++ case '\010': FakeButtonPress(&but[BPREV]); break; ++ + case '\014': FakeButtonPress(&but[BLOAD]); break; /* ^L */ case '\023': FakeButtonPress(&but[BSAVE]); break; /* ^S */ case '\020': FakeButtonPress(&but[BPRINT]); break; /* ^P */ ++ case '\177': case '\004': FakeButtonPress(&but[BDELETE]); break; /* ^D */ - + @@ -13666,7 +21747,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c case 'T': FakeButtonPress(&but[BROTL]); break; case 't': FakeButtonPress(&but[BROTR]); break; case 'h': FakeButtonPress(&but[BFLIPH]); break; -@@ -1604,24 +1602,24 @@ +@@ -1604,24 +1903,24 @@ case 'C': FakeButtonPress(&but[BACROP]); break; case 'P': FakeButtonPress(&but[BPAD]); break; case 'A': FakeButtonPress(&but[BANNOT]); break; @@ -13697,7 +21778,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c *donep = done; *retvalp = retval; } -@@ -1657,7 +1655,7 @@ +@@ -1657,7 +1956,7 @@ else name = namelist[i]; TextView(name); @@ -13706,16 +21787,22 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (name != namelist[i]) free(name); } -@@ -1671,7 +1669,7 @@ - int i, arg1, arg2, numargs, pct1, pct2, state, neww, newh; - char txt[512], buf[64], *sp, ch; - static char *labels[] = { "\nOk", "\033Cancel" }; +@@ -1668,10 +1967,10 @@ + /* open 'set size' prompt window, get a string, parse it, and try to + set the window size accordingly */ + +- int i, arg1, arg2, numargs, pct1, pct2, state, neww, newh; +- char txt[512], buf[64], *sp, ch; +- static char *labels[] = { "\nOk", "\033Cancel" }; - ++ int i, arg1, arg2, numargs, pct1, pct2, state, neww, newh; ++ char txt[512], buf[64], *sp, ch; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; + sprintf(txt, "Enter new image display size (ex. '400 x 300'),\n"); strcat (txt, "expansion ratio (ex. '75%'),\n"); strcat (txt, "or expansion ratios (ex. '200% x 125%'):"); -@@ -1685,7 +1683,7 @@ +@@ -1685,7 +1984,7 @@ /* attempt to parse the string accordingly... @@ -13724,7 +21811,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c * (-ish. <num> all by itself isn't legal) * there may be any # of spaces between items, including zero */ -@@ -1825,7 +1823,7 @@ +@@ -1825,7 +2124,7 @@ if (theImage) XPutImage(theDisp,mainW,theGC,theImage,x,y,x,y, (u_int) w, (u_int) h); @@ -13733,7 +21820,24 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (DEBUG) fprintf(stderr,"Tried to DrawWindow when theImage was NULL\n"); } -@@ -1872,7 +1870,7 @@ +@@ -1845,12 +2144,14 @@ + return; + } + ++ GetWindowPos(&xwa); ++ + /* determine if new size goes off edge of screen. if so move window so it + doesn't go off screen */ +- +- GetWindowPos(&xwa); + if (xwa.x + w > vrWIDE) xwa.x = vrWIDE - w; + if (xwa.y + h > vrHIGH) xwa.y = vrHIGH - h; ++ if (xwa.x < 0) xwa.x = 0; ++ if (xwa.y < 0) xwa.y = 0; + + if (DEBUG) fprintf(stderr,"%s: resizing window to %d,%d at %d,%d\n", + cmd,w,h,xwa.x,xwa.y); +@@ -1872,7 +2173,7 @@ XWindowAttributes xwa; xvbzero((char *) &xwa, sizeof(XWindowAttributes)); xwa.x = xwa.y = 0; @@ -13742,7 +21846,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c xwa.height = dispHIGH; SetWindowPos(&xwa); } -@@ -1898,14 +1896,14 @@ +@@ -1898,14 +2199,14 @@ rotatesLeft++; XClearWindow(theDisp, mainW); /* get rid of old bits */ GenExpose(mainW, 0, 0, (u_int) eWIDE, (u_int) eHIGH); @@ -13759,7 +21863,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c r = (wr>hr) ? wr : hr; /* r is the max(wr,hr) */ ew = (int) ((ew / r) + 0.5); eh = (int) ((eh / r) + 0.5); -@@ -1920,7 +1918,7 @@ +@@ -1920,7 +2221,7 @@ void WCrop(w,h,dx,dy) int w,h,dx,dy; { @@ -13768,7 +21872,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XWindowAttributes xwa; if (useroot) { -@@ -1931,7 +1929,7 @@ +@@ -1931,7 +2232,7 @@ else { /* we want to move window to old x,y + dx,dy (in pic coords) */ GetWindowPos(&xwa); @@ -13777,7 +21881,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (!origcropvalid) { /* first crop. remember win pos */ origcropvalid = 1; origcropx = xwa.x; -@@ -1939,7 +1937,7 @@ +@@ -1939,7 +2240,7 @@ } CoordC2E(dx, dy, &ex, &ey); @@ -13786,16 +21890,26 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c xwa.x += ex; xwa.y += ey; xwa.width = w; xwa.height = h; GenExpose(mainW, 0, 0, (u_int) eWIDE, (u_int) eHIGH); -@@ -1980,7 +1978,7 @@ - if (xwa.x<0) xwa.x = 0; - if (xwa.y<0) xwa.y = 0; +@@ -1974,13 +2275,14 @@ + xwa.y = origcropy; + } + +- if (xwa.x + w > vrWIDE) xwa.x = vrWIDE - w; /* keep on screen */ ++ /* keep on screen */ ++ if (xwa.x + w > vrWIDE) xwa.x = vrWIDE - w; + if (xwa.y + h > vrHIGH) xwa.y = vrHIGH - h; ++ if (xwa.x < 0) xwa.x = 0; ++ if (xwa.y < 0) xwa.y = 0; + +- if (xwa.x<0) xwa.x = 0; +- if (xwa.y<0) xwa.y = 0; xwa.width = w; xwa.height = h; - + if (!useroot) { SetWindowPos(&xwa); GenExpose(mainW, 0, 0, (u_int) eWIDE, (u_int) eHIGH); -@@ -1995,8 +1993,8 @@ +@@ -1995,8 +2297,8 @@ XWindowAttributes *xwa; { Window child; @@ -13806,7 +21920,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c the border is not included (x,y map to top-left pixel in window) */ /* Get the window width/height */ -@@ -2023,7 +2021,7 @@ +@@ -2023,36 +2325,58 @@ /* if we're less than max size in one axis, allow window manager doohickeys on the screen */ @@ -13815,7 +21929,32 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (xwa->width < dispWIDE && xwc.x < p_offx) xwc.x = p_offx; if (xwa->height < dispHIGH && xwc.y < p_offy) xwc.y = p_offy; -@@ -2034,9 +2032,9 @@ ++ /* Try to keep bottom right decorations inside */ ++#ifdef CRAP ++ if (xwc.x+eWIDE-debkludge_offx>dispWIDE) { ++ xwc.x=dispWIDE-eWIDE+debkludge_offx; ++ if (xwc.x<0) xwc.x=0; ++ } ++ if (xwc.y+eHIGH-debkludge_offy>dispHIGH) { ++ xwc.y=dispHIGH-eHIGH+debkludge_offy; ++ if (xwc.y<0) xwc.y=0; ++ } ++#else ++ if (xwc.x+eWIDE+p_offx>dispWIDE) { ++ xwc.x=dispWIDE-(eWIDE+debkludge_offx); ++ if (xwc.x<0) xwc.x=0; ++ } ++ if (xwc.y+eHIGH+p_offy>dispHIGH) { ++ xwc.y=dispHIGH-(eHIGH+debkludge_offy); ++ if (xwc.y<0) xwc.y=0; ++ } ++#endif ++ + xwc.width = xwa->width; + xwc.height = xwa->height; + +- ++#define BAD_IDEA #ifdef BAD_IDEA /* if there is a virtual window manager running, then we should translate the coordinates that are in terms of 'real' screen into coordinates @@ -13827,8 +21966,12 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (vrootW != rootW) { /* virtual window manager running */ int x1,y1; Window child; -@@ -2045,14 +2043,14 @@ - xwc.x,xwc.y,x1,y1); +- XTranslateCoordinates(theDisp, rootW, vrootW,xwc.x,xwc.y,&x1,&y1,&child); ++ ++ XTranslateCoordinates(theDisp, rootW, vrootW, xwc.x, xwc.y, &x1, &y1, &child); + if (DEBUG) fprintf(stderr,"SWP: translate: %d,%d -> %d,%d\n", +- xwc.x,xwc.y,x1,y1); ++ xwc.x, xwc.y, x1, y1); xwc.x = x1; xwc.y = y1; } -#endif @@ -13844,7 +21987,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c xwa->border_width, kludge_offx, kludge_offy); } -@@ -2080,7 +2078,7 @@ +@@ -2080,7 +2404,7 @@ /* all non-DXWM window managers (?) */ /* Move/Resize the window. */ @@ -13853,7 +21996,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c CWX | CWY | CWWidth | CWHeight /*| CWBorderWidth*/, &xwc); } -@@ -2090,7 +2088,7 @@ +@@ -2090,7 +2414,7 @@ static void CropKey(dx,dy,grow,crop) int dx,dy,grow,crop; { @@ -13862,7 +22005,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (crop) { /* chop off a pixel from the appropriate edge */ int dealt=1; -@@ -2112,7 +2110,7 @@ +@@ -2112,7 +2436,7 @@ } return; } @@ -13871,16 +22014,16 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (grow) MoveGrowSelection(0, 0, dx, dy); else MoveGrowSelection(dx, dy, 0, 0); } -@@ -2128,7 +2126,7 @@ +@@ -2128,7 +2452,7 @@ u_long wh, bl; int ty, w, ecol, done1; char foo[128]; - char *str = -+ char *str = ++ const char *str = "8888,8888 = 123,123,123 #123456 (123,123,123 HSV) [-2345,-2345]"; ecol = 0; wh = infobg; bl = infofg; -@@ -2136,14 +2134,14 @@ +@@ -2136,14 +2460,14 @@ if (!dropper) { Pixmap pix, mask; XColor cfg, cbg; @@ -13899,7 +22042,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c dropper_x_hot, dropper_y_hot); if (pix) XFreePixmap(theDisp, pix); if (mask) XFreePixmap(theDisp, mask); -@@ -2151,7 +2149,7 @@ +@@ -2151,7 +2475,7 @@ if (dropper) XDefineCursor(theDisp, mainW, dropper); @@ -13908,7 +22051,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c and use those colors instead of infobg and infofg */ if (LocalCmap) { -@@ -2159,7 +2157,7 @@ +@@ -2159,7 +2483,7 @@ for (i=0; i<nfcols; i++) ctab[i].pixel = freecols[i]; XQueryColors(theDisp,LocalCmap,ctab,nfcols); @@ -13917,7 +22060,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c /* find 'blackest' pixel */ cval = 0x10000 * 3; for (i=0; i<nfcols; i++) -@@ -2176,7 +2174,7 @@ +@@ -2176,7 +2500,7 @@ wh = ctab[i].pixel; } } @@ -13926,7 +22069,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XSetFont(theDisp, theGC, monofont); w = XTextWidth(monofinfo, str, (int) strlen(str)); -@@ -2185,7 +2183,7 @@ +@@ -2185,7 +2509,7 @@ else ty = eHIGH-(monofinfo->ascent + mfinfo->descent)-4; XSetForeground(theDisp, theGC, bl); @@ -13935,7 +22078,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c (u_int) (monofinfo->ascent+monofinfo->descent) + 4); XSetForeground(theDisp, theGC, wh); XSetBackground(theDisp, theGC, bl); -@@ -2198,15 +2196,15 @@ +@@ -2198,15 +2522,15 @@ if (!XQueryPointer(theDisp,mainW,&rW,&cW,&rx,&ry,&x,&y,&mask)) continue; if (done1 && !(mask & Button2Mask)) break; /* button released */ @@ -13955,7 +22098,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (picType == PIC8) { ecol = pix = pic[py * pWIDE + px]; rval = rcmap[pix]; gval = gcmap[pix]; bval = bcmap[pix]; -@@ -2216,7 +2214,7 @@ +@@ -2216,7 +2540,7 @@ gval = pic[py * pWIDE * 3 + px * 3 + 1]; bval = pic[py * pWIDE * 3 + px * 3 + 2]; } @@ -13964,7 +22107,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c clearR = rval; clearG = gval; clearB = bval; rgb2hsv(rval, gval, bval, &h1, &s1, &v1); -@@ -2229,8 +2227,8 @@ +@@ -2229,8 +2553,8 @@ px, py, rval, gval, bval, rval, gval, bval, (int) h1, (int) (s1 * 100), (int) (v1 * 100), px-orgx, py-orgy); @@ -13975,7 +22118,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c foo, (int) strlen(foo)); ox = px; oy = py; done1 = 1; -@@ -2275,7 +2273,7 @@ +@@ -2275,7 +2599,7 @@ /* returns true if there's a config event in which mainW changes size in the event queue */ @@ -13984,7 +22127,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XSync(theDisp, False); foo = 0; XCheckIfEvent(theDisp, &ev, IsConfig, &foo); -@@ -2328,7 +2326,7 @@ +@@ -2328,7 +2652,7 @@ * BadMatch errors on XGetImage */ @@ -13993,7 +22136,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c (xerrcode == BadAccess && err->request_code==88 /* X_FreeColors */ ) || (err->request_code == 113 /* X_KillClient */ ) || (xerrcode == BadLength && err->request_code==18 /* X_ChangeProp */ ) || -@@ -2361,7 +2359,7 @@ +@@ -2361,17 +2685,39 @@ { /* but first, if any input-grabbing popups are active, we have to 'cancel' them. */ @@ -14002,7 +22145,39 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c if (psUp) PSDialog(0); /* close PS window */ #ifdef HAVE_JPEG -@@ -2400,14 +2398,14 @@ + if (jpegUp) JPEGDialog(0); /* close jpeg window */ + #endif + ++#ifdef HAVE_JP2K ++ if (jp2kUp) JP2KDialog(0); /* close jpeg 2000 window */ ++#endif ++ + #ifdef HAVE_TIFF + if (tiffUp) TIFFDialog(0); /* close tiff window */ + #endif + ++#ifdef HAVE_PNG ++ if (pngUp) PNGDialog(0); /* close png window */ ++#endif ++ ++ if (pcdUp) PCDDialog(0); /* close pcd window */ ++ ++#ifdef HAVE_PIC2 ++ if (pic2Up) PIC2Dialog(0); /* close pic2 window */ ++#endif ++ ++#ifdef HAVE_PCD ++ if (pcdUp) PCDDialog(0); /* close pcd window */ ++#endif ++ ++#ifdef HAVE_MGCSFX ++ if (mgcsfxUp) MGCSFXDialog(0); /* close mgcsfx window */ ++#endif ++ + ClosePopUp(); + + /* make the interrupt signal look like a '\n' keypress in ctrlW */ +@@ -2400,14 +2746,14 @@ if (!pen) { Pixmap pix, pmask; XColor cfg, cbg; @@ -14021,7 +22196,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c pen_x_hot, pen_y_hot); if (pix) XFreePixmap(theDisp, pix); if (pmask) XFreePixmap(theDisp, pmask); -@@ -2416,7 +2414,7 @@ +@@ -2416,7 +2762,7 @@ if (pen) XDefineCursor(theDisp, mainW, pen); @@ -14030,7 +22205,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c | StructureNotifyMask /* | ButtonPressMask */ | KeyReleaseMask | ColormapChangeMask | EnterWindowMask | LeaveWindowMask ); -@@ -2435,7 +2433,7 @@ +@@ -2435,7 +2781,7 @@ switch (state) { case 0: /* initial state: make sure we do one pixel */ @@ -14039,7 +22214,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c paintPixel(px, py); if (nmask & ShiftMask ) state = 99; -@@ -2444,7 +2442,7 @@ +@@ -2444,7 +2790,7 @@ else state = 10; break; @@ -14048,7 +22223,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c case 1: /* waiting for click */ if (nmask & ShiftMask) state = 99; else if ( mask & Button2Mask) { -@@ -2459,7 +2457,7 @@ +@@ -2459,7 +2805,7 @@ } break; @@ -14057,7 +22232,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c case 10: /* in freehand drawing mode */ if (nmask & ShiftMask ) state = 99; else if (nmask & Button2Mask) state = 1; -@@ -2507,11 +2505,11 @@ +@@ -2507,11 +2853,11 @@ XSync(theDisp, False); Timer(100); } @@ -14071,7 +22246,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c case 99: /* EXIT loop: cleanup */ if (line) { /* erase old xor-line */ paintXLine(lx, ly, px1, py1, 0); -@@ -2521,11 +2519,11 @@ +@@ -2521,11 +2867,11 @@ break; } } @@ -14087,7 +22262,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c | StructureNotifyMask | ButtonPressMask | KeyReleaseMask | ColormapChangeMask | EnterWindowMask | LeaveWindowMask ); -@@ -2557,17 +2555,17 @@ +@@ -2557,17 +2903,17 @@ byte *pp = pic + (y * pWIDE + x) * 3; pp[0] = clearR; pp[1] = clearG; pp[2] = clearB; } @@ -14110,17 +22285,63 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XFillRectangle(theDisp,mainW,theGC, ex,ey, (u_int) ew, (u_int) eh); } -@@ -2577,7 +2575,7 @@ +@@ -2576,29 +2922,46 @@ + static void paintLine(x,y,x1,y1) int x,y,x1,y1; { - int dx,dy,i,lx,ly,adx,ady; +- int dx,dy,i,lx,ly,adx,ady; - -+ - dx = x1-x; dy = y1-y; - adx = abs(dx); ady = abs(dy); - -@@ -2598,7 +2596,7 @@ - paintPixel(lx,ly); +- dx = x1-x; dy = y1-y; +- adx = abs(dx); ady = abs(dy); +- +- if (dx == 0 && dy == 0) paintPixel(x,y); +- +- else if (adx > ady) { /* X is major axis */ +- for (i=0; i<=adx; i++) { +- lx = x + (i * dx + (adx/2)) / abs(dx); +- ly = y + (i * dy + (adx/2)) / abs(dx); +- paintPixel(lx,ly); ++ int t,dx,dy,d,dd; ++ ++ dx = abs(x1-x); dy = abs(y1-y); ++ ++ if (dx >= dy) { /* X is major axis */ ++ if (x > x1) { ++ t = x; x = x1; x1 = t; ++ t = y; y = y1; y1 = t; ++ } ++ d = dy + dy - dx; ++ dd = y < y1 ? 1 : -1; ++ while (x <= x1) { ++ paintPixel(x,y); ++ if (d > 0) { ++ y += dd; ++ d -= dx + dx; ++ } ++ ++x; ++ d += dy + dy; + } + } + + else { /* Y is major axis */ +- for (i=0; i<=ady; i++) { +- lx = x + (i * dx + (ady/2)) / ady; +- ly = y + (i * dy + (ady/2)) / ady; +- paintPixel(lx,ly); ++ if (y > y1) { ++ t = x; x = x1; x1 = t; ++ t = y; y = y1; y1 = t; ++ } ++ d = dx + dx - dy; ++ dd = x < x1 ? 1 : -1; ++ while (y <= y1) { ++ paintPixel(x,y); ++ if (d > 0) { ++ x += dd; ++ d -= dy + dy; ++ } ++ ++y; ++ d += dx + dx; } } - @@ -14128,7 +22349,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c } -@@ -2618,14 +2616,14 @@ +@@ -2618,14 +2981,14 @@ CoordP2E(x+1,y+1,&tx1,&ty1); ex = tx + (tx1 - tx)/2; ey = ty + (ty1 - ty)/2; @@ -14146,7 +22367,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XSetPlaneMask(theDisp, theGC, xorMasks[pntxlcol]); XSetFunction(theDisp, theGC, GXinvert); XDrawLine(theDisp, mainW, theGC, ex, ey, ex1, ey1); -@@ -2638,10 +2636,8 @@ +@@ -2638,10 +3001,8 @@ static void BlurPaint() { Window rW,cW; @@ -14158,7 +22379,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c /* blurs pixels in either editCol (PIC8) or clear{R,G,B} (PIC24) until 'shift' key is released. */ -@@ -2653,14 +2649,14 @@ +@@ -2653,14 +3014,14 @@ if (!blur) { Pixmap pix, mask; XColor cfg, cbg; @@ -14177,7 +22398,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c blur_x_hot, blur_y_hot); if (pix) XFreePixmap(theDisp, pix); if (mask) XFreePixmap(theDisp, mask); -@@ -2669,7 +2665,7 @@ +@@ -2669,7 +3030,7 @@ if (blur) XDefineCursor(theDisp, mainW, blur); @@ -14186,7 +22407,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c | StructureNotifyMask /* | ButtonPressMask */ | KeyReleaseMask | ColormapChangeMask | EnterWindowMask | LeaveWindowMask ); -@@ -2682,12 +2678,12 @@ +@@ -2682,12 +3043,12 @@ if (!(mask & Button3Mask)) { dragging = 0; continue; } CoordE2P(x,y, &px, &py); @@ -14201,7 +22422,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c dx = px-ox; dy = py-oy; /* at least one will be non-zero */ if (abs(dx) > abs(dy)) { /* X is major axis */ for (i=0; i<=abs(dx); i++) { -@@ -2707,10 +2703,10 @@ +@@ -2707,10 +3068,10 @@ done1 = 1; dragging = 1; ox = px; oy = py; } } @@ -14215,7 +22436,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c | StructureNotifyMask | ButtonPressMask | KeyReleaseMask | ColormapChangeMask | EnterWindowMask | LeaveWindowMask ); -@@ -2731,9 +2727,9 @@ +@@ -2731,9 +3092,9 @@ { /* returns position of highest set bit in 'ul' as an integer (0-31), or -1 if none */ @@ -14227,7 +22448,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c hb = 0x80; hb = hb << 24; /* hb = 0x80000000UL */ for (i=31; ((ul & hb) == 0) && i>=0; i--, ul<<=1); return i; -@@ -2757,7 +2753,7 @@ +@@ -2757,7 +3118,7 @@ d = 3*(256*256); j=0; for (i=0; i<numcols; i++) { @@ -14236,7 +22457,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c ((g-gMap[i]) + (g-gMap[i])) + ((b-bMap[i]) * (b-bMap[i])); if (i==0 || di<d) { j=i; d=di; } -@@ -2771,45 +2767,45 @@ +@@ -2771,45 +3132,45 @@ if (theVisual->class==TrueColor || theVisual->class==DirectColor) { unsigned long rmask, gmask, bmask; int rshift, gshift, bshift, cshift, maplen; @@ -14294,7 +22515,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c else { /* non-TrueColor/DirectColor visual */ if (!ncols) rv = ((r + g + b >= 128*3) ? white : black); -@@ -2820,14 +2816,14 @@ +@@ -2820,14 +3181,14 @@ return rv; } @@ -14312,7 +22533,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c around the pixel, and replaces it with the average value (PIC24), or the closest existing color to the average value (PIC8) */ -@@ -2861,7 +2857,7 @@ +@@ -2861,7 +3222,7 @@ if (picType == PIC8) { /* find nearest actual color */ d = 3*(256*256); j=0; for (i=0; i<numcols; i++) { @@ -14321,7 +22542,7 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c ((ag-gMap[i]) + (ag-gMap[i])) + ((ab-bMap[i]) * (ab-bMap[i])); if (i==0 || di<d) { j=i; d=di; } -@@ -2874,17 +2870,17 @@ +@@ -2874,17 +3235,17 @@ pp = pic + (y * pWIDE + x) * 3; pp[0] = ar; pp[1] = ag; pp[2] = ab; } @@ -14344,9 +22565,20 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c XFillRectangle(theDisp,mainW,theGC, ex,ey, (u_int) ew, (u_int) eh); } -@@ -2901,13 +2897,13 @@ - static char buf[256] = {'\0'}; - static char *labels[] = {"\nOk", "\033Cancel" }; +@@ -2895,19 +3256,19 @@ + /***********************/ + static void annotatePic() + { +- int i, w,h, len; +- byte *cimg; +- char txt[256]; +- static char buf[256] = {'\0'}; +- static char *labels[] = {"\nOk", "\033Cancel" }; ++ int i, w,h, len; ++ byte *cimg; ++ char txt[256]; ++ static char buf[256] = {'\0'}; ++ static const char *labels[] = {"\nOk", "\033Cancel" }; - sprintf(txt, "Image Annotation:\n\n%s", + sprintf(txt, "Image Annotation:\n\n%s", @@ -14362,19 +22594,59 @@ diff -ruN xv-3.10a/xvevent.c xv-3.10a-bugfixes/xvevent.c /* build a 'cimg' array to be pasted on clipboard */ w = strlen(buf) * 6 - 1; h = 9; len = CIMG_PIC8 + w*h; -diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c +diff -ru xv-3.10a/xvfits.c xv-3.10a-enhancements/xvfits.c --- xv-3.10a/xvfits.c 1994-12-27 23:43:29.000000000 -0800 -+++ xv-3.10a-bugfixes/xvfits.c 2005-04-02 21:08:45.000000000 -0800 -@@ -63,7 +63,7 @@ ++++ xv-3.10a-enhancements/xvfits.c 2007-05-12 15:46:55.000000000 -0700 +@@ -14,7 +14,7 @@ + * provided "as is" without express or implied warranty. + */ + +- ++#define NEEDSDIR /* for S_IRUSR|S_IWUSR */ + #include "xv.h" + + #define NCARDS (36) +@@ -39,17 +39,17 @@ + static char *fits_block=NULL; + + +-static int splitfits PARM((byte *, char *, int, int, int, char *)); +-static char *ftopen3d PARM((FITS *, char *, int *, int *, int *, int *)); +-static void ftclose PARM((FITS *)); +-static int ftgbyte PARM((FITS *, byte *, int)); +-static char *rdheader PARM((FITS *)); +-static char *wrheader PARM((FILE *, int, int, char *)); +-static char *rdcard PARM((char *, char *, DATTYPE, long int *)); +-static void wrcard PARM((char *, char *, DATTYPE, int, char *)); +-static int ftgdata PARM((FITS *, void *, int)); +-static void ftfixdata PARM((FITS *, void *, int)); +-static void flip PARM((byte *, int, int)); ++static int splitfits PARM((byte *, char *, int, int, int, char *)); ++static const char *ftopen3d PARM((FITS *, char *, int *, int *, int *, int *)); ++static void ftclose PARM((FITS *)); ++static int ftgbyte PARM((FITS *, byte *, int)); ++static const char *rdheader PARM((FITS *)); ++static const char *wrheader PARM((FILE *, int, int, char *)); ++static const char *rdcard PARM((char *, const char *, DATTYPE, long int *)); ++static void wrcard PARM((char *, const char *, DATTYPE, int, char *)); ++static int ftgdata PARM((FITS *, void *, int)); ++static void ftfixdata PARM((FITS *, void *, int)); ++static void flip PARM((byte *, int, int)); + + + +@@ -63,16 +63,16 @@ /* returns '1' on success */ FITS fs; - int i, nx, ny, nz, bitpix, np, nrd, ioerror; + int i, nx, ny, nz, bitpix, nrd, ioerror, npixels, bufsize; byte *image; - char *error; +- char *error; ++ const char *error; char basename[64]; -@@ -72,7 +72,7 @@ + + if (fits_block == NULL) { fits_block = (char *) malloc((size_t) BLOCKSIZE); if (!fits_block) FatalError("Insufficient memory for FITS block buffer"); } @@ -14474,7 +22746,8 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c - int i, j, np, nend; + int i, j, npixels, nend; byte *ptr; - char *error; +- char *error; ++ const char *error; byte rgb[256]; - + @@ -14517,10 +22790,11 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c - - int i, np=nx * ny, ioerror, nwrt; + -+ int i, npixels=nx * ny, nwrt; ++ int i, npixels=nx * ny, nwrt, tmpfd; FILE *fp; - char *error; +- char *error; - byte *work; ++ const char *error; char filename[70]; #ifndef VMS @@ -14538,7 +22812,18 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (basename[0] == '\0') { SetISTR(ISTR_WARNING, "%s", "Unable to build temporary filename"); return 1; -@@ -251,7 +259,7 @@ +@@ -246,28 +254,37 @@ + + for (i=0; i < nz && !error; i++) { + sprintf(filename, "%s%d", basename, i+1); +- fp = xv_fopen(filename, "w"); ++ tmpfd = open(filename,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); ++ if (tmpfd < 0) { ++ error = "Unable to open temporary file"; ++ break; ++ } ++ fp = fdopen(tmpfd, "w"); + if (!fp) { error = "Unable to open temporary file"; break; } @@ -14546,14 +22831,18 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c + if (wrheader(fp, nx, ny, comment)) { error = "I/O error writing temporary file"; ++ fflush(fp); fclose(fp); -@@ -259,15 +267,15 @@ + unlink(filename); ++ close(tmpfd); break; } - nwrt = fwrite(image+i*np, sizeof(byte), (size_t) np, fp); + nwrt = fwrite(image+i*npixels, sizeof(byte), (size_t) npixels, fp); ++ fflush(fp); fclose(fp); ++ close(tmpfd); if (nwrt == 0) { /* failed to write any data */ error = "I/O error writing temporary file"; @@ -14566,7 +22855,14 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c error = "I/O error writing temporary file"; } -@@ -291,13 +299,13 @@ +@@ -285,19 +302,19 @@ + + + /************************************/ +-static char *wrheader(fp, nx, ny, comment) ++static const char *wrheader(fp, nx, ny, comment) + FILE *fp; + int nx, ny; char *comment; { /* Writes a minimalist FITS file header */ @@ -14583,7 +22879,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c sprintf(history, "Written by XV %s", VERSTR); lenhist = strlen(history); -@@ -309,7 +317,7 @@ +@@ -309,7 +326,7 @@ wrcard(&block[80*i++], "NAXIS2", T_INT, ny, NULL); /* write NAXIS2 card */ /* Write HISTORY keyword */ @@ -14592,7 +22888,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (comment && *comment != '\0') { while (*comment == '\n') comment++; /* Skip any blank lines */ -@@ -317,7 +325,7 @@ +@@ -317,7 +334,7 @@ for (j=0; j<72; j++) if (comment[j] == '\0' || comment[j] == '\n') break; @@ -14601,7 +22897,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c * Check to see if it is an xv history record; if so, then avoid * duplicating it. */ -@@ -330,7 +338,7 @@ +@@ -330,7 +347,7 @@ for (i=0, bp=block; i<BLOCKSIZE; i++, bp++) *bp = ' '; i = 0; } @@ -14610,7 +22906,16 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c comment += j; while (*comment == '\n') comment++; /* Skip any blank lines */ } -@@ -358,40 +366,40 @@ +@@ -346,7 +363,7 @@ + + + /************************************/ +-static char *ftopen3d(fs, file, nx, ny, nz, bitpix) ++static const char *ftopen3d(fs, file, nx, ny, nz, bitpix) + FITS *fs; + char *file; + int *nx, *ny, *nz, *bitpix; +@@ -358,40 +375,40 @@ * Will return an error message if the primary data unit is not a * 2 or 3-dimensional array. */ @@ -14618,8 +22923,9 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c + FILE *fp; int naxis, i; - char *error; +- char *error; - ++ const char *error; + fp = xv_fopen(file, "r"); if (!fp) return "Unable to open FITS file"; @@ -14661,9 +22967,21 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c return NULL; } -@@ -418,11 +426,11 @@ +@@ -406,7 +423,7 @@ + + + /************************************/ +-static char *rdheader(fs) ++static const char *rdheader(fs) + FITS *fs; + { + /* reads the fits header, and updates the FITS structure fs. +@@ -416,13 +433,13 @@ + int i, j, res, commlen, commsize; + char name[9]; char *block=fits_block, *p; - char *error; +- char *error; ++ const char *error; long int val; /* the value */ - + @@ -14675,7 +22993,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c res = fread(block, sizeof(char), (size_t) BLOCKSIZE, fs->fp); if (res != BLOCKSIZE) return "Error reading FITS file"; i = 0; -@@ -464,13 +472,13 @@ +@@ -464,13 +481,13 @@ if (res != BLOCKSIZE) return "Error reading FITS file"; i = 0; } @@ -14691,7 +23009,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (j < 3) fs->axes[j] = val; else if (val != 1) return "FITS file has more than three dimensions"; i++; -@@ -488,21 +496,21 @@ +@@ -488,21 +505,21 @@ if (res != BLOCKSIZE) return "Unexpected eof in FITS file"; i = 0; } @@ -14717,7 +23035,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (commlen + j + 2 > commsize) { /* if too small */ char *new; commsize += commsize; /* double size of array */ -@@ -515,7 +523,7 @@ +@@ -515,7 +532,7 @@ free(fs->comment); fs->comment = new; } @@ -14726,7 +23044,17 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c xvbcopy(p, &fs->comment[commlen], (size_t) j); /* add string */ commlen += j; fs->comment[commlen++] = '\n'; /* with trailing cr */ -@@ -556,9 +564,9 @@ +@@ -531,7 +548,8 @@ + + /************************************/ + static void wrcard(card, name, dtype, kvalue, svalue) +- char *card, *name; ++ char *card; ++ const char *name; + DATTYPE dtype; /* type of value */ + int kvalue; + char *svalue; +@@ -556,9 +574,9 @@ l = strlen(name); if (l) xvbcopy(name, card, (size_t) l); /* copy name */ @@ -14738,7 +23066,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (dtype == T_STR) { l = kvalue; if (l <= 0) return; -@@ -566,9 +574,9 @@ +@@ -566,9 +584,9 @@ xvbcopy(svalue, &card[8], (size_t) l); return; } @@ -14750,7 +23078,19 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (dtype == T_LOG) card[29] = kvalue ? 'T' : 'F'; else { /* T_INT */ -@@ -599,7 +607,7 @@ +@@ -579,8 +597,9 @@ + + + /************************************/ +-static char *rdcard(card, name, dtype, kvalue) +- char *card, *name; ++static const char *rdcard(card, name, dtype, kvalue) ++ char *card; ++ const char *name; + DATTYPE dtype; /* type of value */ + long int *kvalue; + { +@@ -599,7 +618,7 @@ int i, ptr; char namestr[9]; static char error[45]; @@ -14759,7 +23099,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c xvbcopy(card, namestr, (size_t) 8); for (i=7; i>=0 && namestr[i] == ' '; i--); -@@ -609,24 +617,24 @@ +@@ -609,24 +628,24 @@ sprintf(error, "Keyword %s not found in FITS file", name); return error; } @@ -14788,7 +23128,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (ptr > 29) return "Keyword has bad integer value in FITS file"; xvbcopy(&card[ptr], num, (size_t) (30-ptr)); num[30-ptr] = '\0'; -@@ -634,7 +642,7 @@ +@@ -634,7 +653,7 @@ if (j != 1) return "Keyword has bad integer value in FITS file"; *kvalue = ival; } @@ -14797,7 +23137,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c return NULL; } -@@ -660,13 +668,13 @@ +@@ -660,13 +679,13 @@ */ int res; @@ -14814,7 +23154,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c size is always a factor of BLOCKSIZE */ int loffs, nblock=BLOCKSIZE/fs->size; -@@ -714,7 +722,7 @@ +@@ -714,7 +733,7 @@ byte *ptr=buffer; /* @@ -14823,7 +23163,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c * variables. * Because the native int types may be larger than the types in the file, * we start from the end and work backwards to avoid overwriting data -@@ -741,12 +749,12 @@ +@@ -741,12 +760,12 @@ ((unsigned int)ptr[2] << 8) | ((unsigned int)ptr[3]); } @@ -14838,7 +23178,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (exps == NULL) { exps = (float *)malloc(256 * sizeof(float)); if (exps == NULL) FatalError("Insufficient memory for exps store"); -@@ -754,7 +762,7 @@ +@@ -754,7 +773,7 @@ for (i=151; i < 256; i++) exps[i] = 2.*exps[i-1]; for (i=149; i >= 0; i--) exps[i] = 0.5*exps[i+1]; } @@ -14847,7 +23187,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c for (i=0; i < n; i++, ptr+=4) { k = (int)*ptr; j = ((int)ptr[1] << 16) | ((int)ptr[2] << 8) | (int)ptr[3]; -@@ -765,13 +773,13 @@ +@@ -765,13 +784,13 @@ } } @@ -14863,7 +23203,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c if (exps == NULL) { exps = (double *)malloc(2048 * sizeof(double)); if (exps == NULL) FatalError("Insufficient memory for exps store"); -@@ -779,7 +787,7 @@ +@@ -779,7 +798,7 @@ for (i=1076; i < 2048; i++) exps[i] = 2.*exps[i-1]; for (i=1074; i >= 0; i--) exps[i] = 0.5*exps[i+1]; } @@ -14872,7 +23212,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c for (i=0; i < n; i++, ptr+=8) { k = (int)*ptr; j = ((unsigned int)ptr[1] << 24) | ((unsigned int)ptr[2] << 16) | -@@ -813,23 +821,36 @@ +@@ -813,23 +832,36 @@ */ void *voidbuff; @@ -14918,7 +23258,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c nelem*fs->size); FatalError(emess); } -@@ -843,28 +864,28 @@ +@@ -843,28 +875,28 @@ short int *buffer=voidbuff; int max, min, maxmin_t; float scale; @@ -14953,7 +23293,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c /* rescale and convert */ if (scale < 255./2.1e9) /* is max-min too big for an int ? */ for (i=0, buffer=voidbuff; i < n; i++) -@@ -872,34 +893,34 @@ +@@ -872,34 +904,34 @@ else /* use integer subtraction */ for (i=0, buffer=voidbuff; i < n; i++) cbuff[i] = (byte)(scale*(float)(buffer[i]-min)); @@ -14997,7 +23337,7 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c /* rescale and convert */ for (i=0, buffer=voidbuff; i < n; i++) cbuff[i] = (byte)(scale*(buffer[i]-min)); -@@ -923,7 +944,7 @@ +@@ -923,7 +955,7 @@ int i; int j, v; byte *buff1, *buff2; @@ -15006,9 +23346,9 @@ diff -ruN xv-3.10a/xvfits.c xv-3.10a-bugfixes/xvfits.c for (i=0; i < ny/2; i++) { buff1 = &buffer[i*nx]; buff2 = &buffer[(ny-1-i)*nx]; -diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c +diff -ru xv-3.10a/xvgam.c xv-3.10a-enhancements/xvgam.c --- xv-3.10a/xvgam.c 1995-01-13 11:51:14.000000000 -0800 -+++ xv-3.10a-bugfixes/xvgam.c 2004-05-16 18:02:11.000000000 -0700 ++++ xv-3.10a-enhancements/xvgam.c 2007-05-13 14:12:04.000000000 -0700 @@ -1,4 +1,4 @@ -/* +/* @@ -15024,16 +23364,59 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c static struct gamstate *defLoadState; static int uptr, uhead, utail; -@@ -153,7 +153,7 @@ +@@ -99,7 +99,7 @@ + int stval; /* start of range (ONLY val ifnot range) */ + int enval; /* end of range */ + int ccwise; /* 1 if range goes ccwise, 0 if cwise */ +- char *str; /* title string */ ++ const char *str; /* title string */ + u_long fg,bg; /* colors */ + int satval; /* saturation value on non-range dial */ + BUTT hdbutt[N_HDBUTT]; +@@ -122,7 +122,7 @@ + static int defAutoApply; + static int hsvnonlinear = 0; + +-static void printUTime PARM((char *)); ++static void printUTime PARM((const char *)); + + static void computeHSVlinear PARM((void)); + static void changedGam PARM((void)); +@@ -153,8 +153,8 @@ static void dragHueDial PARM((void)); static void dragEditColor PARM((void)); -static void HDCreate PARM((HDIAL *, Window, int, int, int, int, +- int, int, char *, u_long, u_long)); +static void HDCreate PARM((HDIAL *, Window, int, int, int, int, - int, int, char *, u_long, u_long)); ++ int, int, const char *, u_long, u_long)); static void HDRedraw PARM((HDIAL *, int)); -@@ -212,13 +212,13 @@ + static int HDClick PARM((HDIAL *, int, int)); +@@ -191,10 +191,11 @@ + + /***************************/ + static void printUTime(str) +- char *str; ++ const char *str; + { + #ifdef TIMING_TEST +- int i; struct rusage ru; ++ int i; ++ struct rusage ru; + + i = getrusage(RUSAGE_SELF, &ru); + fprintf(stderr,"%s: utime = %ld.%ld seconds\n", +@@ -206,19 +207,19 @@ + + /***************************************************/ + void CreateGam(geom, gam, rgam, ggam, bgam, defpreset) +- char *geom; +- double gam, rgam, ggam, bgam; +- int defpreset; ++ const char *geom; ++ double gam, rgam, ggam, bgam; ++ int defpreset; { XSetWindowAttributes xswa; @@ -15050,7 +23433,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c 1,infofg,infobg); modF = XCreateSimpleWindow(theDisp,gamW, 10, 438,MODF_WIDE,MODF_HIGH, 1,infofg,infobg); -@@ -227,7 +227,7 @@ +@@ -227,7 +228,7 @@ rgbF = XCreateSimpleWindow(theDisp,gamW, 467, 8,RGBF_WIDE,RGBF_HIGH, 1,infofg,infobg); @@ -15059,7 +23442,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c FatalError("couldn't create frame windows"); #ifdef BACKING_STORE -@@ -251,25 +251,25 @@ +@@ -251,25 +252,25 @@ /********** COLORMAP editing doo-wahs ***********/ @@ -15084,17 +23467,17 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c "Random", infofg, infobg, hicol, locol); - DCreate(&rhDial, cmapF, 5, 215, 66, 100, 0,360,180, 5, -+ DCreate(&rhDial, cmapF, 5, 215, 66, 100, 0,360,180, 5, ++ DCreate(&rhDial, cmapF, 5, 215, 66, 100, 0.0, 360.0, 180.0, 1.0, 5.0, infofg, infobg, hicol, locol, "Hue", NULL); - DCreate(&gsDial, cmapF, 72, 215, 66, 100, 0,360,180, 5, -+ DCreate(&gsDial, cmapF, 72, 215, 66, 100, 0,360,180, 5, ++ DCreate(&gsDial, cmapF, 72, 215, 66, 100, 0.0, 360.0, 180.0, 1.0, 5.0, infofg, infobg, hicol, locol, "Sat.", NULL); - DCreate(&bvDial, cmapF, 139, 215, 66, 100, 0,360,180, 5, -+ DCreate(&bvDial, cmapF, 139, 215, 66, 100, 0,360,180, 5, ++ DCreate(&bvDial, cmapF, 139, 215, 66, 100, 0.0, 360.0, 180.0, 1.0, 5.0, infofg, infobg, hicol, locol, "Value", NULL); rhDial.drawobj = gsDial.drawobj = bvDial.drawobj = dragEditColor; -@@ -291,44 +291,44 @@ +@@ -291,44 +292,44 @@ #define BY2 (BY0 + BYSPACE*2) #define BY3 (BY0 + BYSPACE*3) @@ -15154,7 +23537,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c infofg,infobg,hicol,locol); -@@ -338,11 +338,11 @@ +@@ -338,11 +339,11 @@ CBCreate(&enabCB, modF,2,2, "Display with HSV/RGB mods.", infofg,infobg,hicol,locol); @@ -15168,12 +23551,12 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c infofg,infobg,hicol,locol); enabCB.val = autoCB.val = resetCB.val = dragCB.val = 1; -@@ -359,23 +359,23 @@ +@@ -359,23 +360,23 @@ srcHD.drawobj = dstHD.drawobj = whtHD.drawobj = dragHueDial; - DCreate(&satDial, hsvF, 100, 199, 100, 121, -100, 100, 0, 5, -+ DCreate(&satDial, hsvF, 100, 199, 100, 121, -100, 100, 0, 5, ++ DCreate(&satDial, hsvF, 100, 199, 100, 121, -100.0, 100.0, 0.0, 1.0, 5.0, infofg, infobg,hicol,locol, "Saturation", "%"); - hueRB = RBCreate(NULL, hsvF, 7, 153, "1", @@ -15200,7 +23583,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c infofg, infobg,hicol,locol); initHmap(); -@@ -394,13 +394,13 @@ +@@ -394,13 +395,13 @@ InitGraf(&gGraf); CreateGraf(&gGraf, rgbF, 10, 179, infofg, infobg, "Green"); @@ -15216,7 +23599,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c SetHSVmode(); ctrls2gamstate(&defstate); -@@ -415,14 +415,14 @@ +@@ -415,14 +416,14 @@ Str2Graf(&preset[1].rstate,"L 4 : 0,0 : 127,0 : 128,255 : 255,255"); Str2Graf(&preset[1].gstate,"L 4 : 0,0 : 127,0 : 128,255 : 255,255"); Str2Graf(&preset[1].bstate,"L 4 : 0,0 : 127,0 : 128,255 : 255,255"); @@ -15233,7 +23616,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c /* set up preset3 as a 'map' pseudo-color preset */ ctrls2gamstate(&preset[3]); -@@ -480,7 +480,7 @@ +@@ -480,7 +481,7 @@ computeHSVlinear(); } @@ -15242,7 +23625,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c /***************************************************/ int GamCheckEvent(xev) -@@ -492,14 +492,14 @@ +@@ -492,14 +493,14 @@ int rv; rv = 1; @@ -15259,7 +23642,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c (e->window == satDial.win || e->window == rhDial.win || e->window == gsDial.win || e->window == bvDial.win || e->window == cmapF || e->window == modF || -@@ -600,7 +600,7 @@ +@@ -600,7 +601,7 @@ else if (e->window == hsvF) { @@ -15268,7 +23651,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c dials2hmap(); build_hremap(); changedGam(); -@@ -654,7 +654,7 @@ +@@ -654,7 +655,7 @@ e->window == gsDial.win || e->window == bvDial.win) { @@ -15277,7 +23660,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c (e->window == gsDial.win && DTrack(&gsDial, x,y)) || (e->window == bvDial.win && DTrack(&bvDial, x,y))) { saveCMap(&prevcmap); -@@ -683,7 +683,7 @@ +@@ -683,7 +684,7 @@ XKeyEvent *e = (XKeyEvent *) xev; char buf[128]; KeySym ks; int stlen; @@ -15286,7 +23669,16 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c stlen = XLookupString(e,buf,128,&ks,(XComposeStatus *) NULL); buf[stlen] = '\0'; -@@ -792,7 +792,7 @@ +@@ -722,7 +723,7 @@ + + if (whtHD.enabCB.val && whtHD.satval) hsvnonlinear++; + +- if (satDial.val != 0) hsvnonlinear++; ++ if (satDial.val != 0.0) hsvnonlinear++; + + /* check intensity graf */ + for (i=0; i<256 && intGraf.func[i]==i; i++); +@@ -792,7 +793,7 @@ int x,y; { XPoint pts[8]; @@ -15295,7 +23687,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c pts[0].x = x+10; pts[0].y = y; pts[1].x = x-4; pts[1].y = y-100; pts[2].x = x-4; pts[2].y = y-40; -@@ -873,11 +873,11 @@ +@@ -873,11 +874,11 @@ XSetForeground(theDisp, theGC, infofg); if (picType != PIC8) { @@ -15309,7 +23701,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c for (i=0; i<numcols; i++) { -@@ -941,14 +941,14 @@ +@@ -941,14 +942,14 @@ if (bp->win == butF && PTINRECT(x, y, bp->x, bp->y, bp->w, bp->h)) break; } @@ -15327,7 +23719,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c if (i<G_NBUTTS) { /* found one */ if (BTTrack(bp)) doCmd(i); -@@ -1003,7 +1003,7 @@ +@@ -1003,7 +1004,7 @@ } /* if i<numcols */ } /* if but==1 */ @@ -15336,7 +23728,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c else if (but==2) { /* color smooth */ int cellnum, delc, col1, j, delr, delg, delb; -@@ -1025,9 +1025,9 @@ +@@ -1025,9 +1026,9 @@ gcmap[col1 + i] = gcmap[col1] + (delg * i) / delc; bcmap[col1 + i] = bcmap[col1] + (delb * i) / delc; @@ -15348,7 +23740,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c if (cellgroup[j] == cellgroup[col1 + i]) { rcmap[j] = rcmap[col1 + i]; gcmap[j] = gcmap[col1 + i]; -@@ -1043,7 +1043,7 @@ +@@ -1043,7 +1044,7 @@ } if (i<numcols) { /* something changed */ @@ -15357,7 +23749,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c sizeof(struct cmapstate)); BTSetActive(&gbut[G_BCOLUNDO],1); applyGamma(1); -@@ -1067,7 +1067,7 @@ +@@ -1067,7 +1068,7 @@ lastcell = curcell; @@ -15366,7 +23758,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c GrabModeAsync, None, None, (Time) CurrentTime); while (1) { Window rW,cW; -@@ -1076,7 +1076,7 @@ +@@ -1076,7 +1077,7 @@ if (XQueryPointer(theDisp,cmapF,&rW,&cW,&rx,&ry,&x,&y,&mask)) { /* if button3 and shift released */ @@ -15375,7 +23767,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c /* if user lets go of B3, reset addonly/delonly flag & lastcell */ if (!(mask & Button3Mask) && (mask & ShiftMask)) { -@@ -1112,7 +1112,7 @@ +@@ -1112,7 +1113,7 @@ if (recolor) { /* colors changed. save to color undo area */ @@ -15384,7 +23776,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c sizeof(struct cmapstate)); BTSetActive(&gbut[G_BCOLUNDO],1); applyGamma(1); /* have to regen entire image when groupings chg */ -@@ -1146,12 +1146,12 @@ +@@ -1146,12 +1147,12 @@ /* cases: curgroup>0, clicked on something in same group remove target from group curgroup>0, clicked on something in different group @@ -15399,7 +23791,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c set curgroup = target group target group gets current values curgroup=0, clicked on something in no group -@@ -1185,7 +1185,7 @@ +@@ -1185,7 +1186,7 @@ } } @@ -15408,7 +23800,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c cellgroup[cnum]>0) { /* merge clicked-on group into curgroup */ mode = ADDONLY; -@@ -1196,11 +1196,11 @@ +@@ -1196,11 +1197,11 @@ selectCell(i,1); rcmap[i] = rcmap[editColor]; gcmap[i] = gcmap[editColor]; @@ -15422,7 +23814,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c else if ((mode!=DELONLY) && cellgroup[cnum] == 0) { /* merge clicked-on cell into curgroup */ mode = ADDONLY; -@@ -1209,7 +1209,7 @@ +@@ -1209,7 +1210,7 @@ selectCell(cnum,1); rcmap[cnum] = rcmap[editColor]; gcmap[cnum] = gcmap[editColor]; @@ -15431,7 +23823,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c } } -@@ -1224,14 +1224,14 @@ +@@ -1224,14 +1225,14 @@ selectCell(i,1); rcmap[i] = rcmap[editColor]; gcmap[i] = gcmap[editColor]; @@ -15449,7 +23841,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c && (cnum != editColor)) { /* create new group for these two cells (cnum and editColor) */ mode = ADDONLY; -@@ -1247,14 +1247,14 @@ +@@ -1247,14 +1248,14 @@ } return rv; @@ -15467,8 +23859,24 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c highlighting/unhighlighting, copy editColor's rgb values to the rgb/hsv dials */ -@@ -1301,8 +1301,8 @@ - DSetVal(&bvDial, bcmap[editColor]); +@@ -1291,18 +1292,18 @@ + rgb2hsv(rcmap[editColor], gcmap[editColor], bcmap[editColor], &h, &s, &v); + if (h<0) h = 0; + +- DSetVal(&rhDial, (int) h); +- DSetVal(&gsDial, (int) (s*100)); +- DSetVal(&bvDial, (int) (v*100)); ++ DSetVal(&rhDial, h); ++ DSetVal(&gsDial, s*100); ++ DSetVal(&bvDial, v*100); + } + else { +- DSetVal(&rhDial, rcmap[editColor]); +- DSetVal(&gsDial, gcmap[editColor]); +- DSetVal(&bvDial, bcmap[editColor]); ++ DSetVal(&rhDial, (double)rcmap[editColor]); ++ DSetVal(&gsDial, (double)gcmap[editColor]); ++ DSetVal(&bvDial, (double)bcmap[editColor]); } } - @@ -15478,15 +23886,27 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c /*********************/ void ApplyECctrls() { -@@ -1310,7 +1310,7 @@ +@@ -1310,16 +1311,15 @@ if (hsvmode) { int rv, gv, bv; - hsv2rgb((double) rhDial.val, ((double) gsDial.val) / 100.0, -+ hsv2rgb((double) rhDial.val, ((double) gsDial.val) / 100.0, - ((double) bvDial.val) / 100.0, &rv, &gv, &bv); +- ((double) bvDial.val) / 100.0, &rv, &gv, &bv); ++ hsv2rgb(rhDial.val, gsDial.val / 100.0, bvDial.val / 100.0, &rv, &gv, &bv); rcmap[editColor] = rv; gcmap[editColor] = gv; + bcmap[editColor] = bv; + } + else { +- rcmap[editColor] = rhDial.val; +- gcmap[editColor] = gsDial.val; +- bcmap[editColor] = bvDial.val; ++ rcmap[editColor] = (int)rhDial.val; ++ gcmap[editColor] = (int)gsDial.val; ++ bcmap[editColor] = (int)bvDial.val; + } + } + @@ -1330,7 +1330,7 @@ { /* this function generates the Floyd-Steinberg gamma curve (fsgamcr) @@ -15605,15 +24025,34 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c case G_BCOLUNDO: for (i=0; i<numcols && cellgroup[i]==prevcmap.cellgroup[i]; i++); -@@ -1560,7 +1560,7 @@ +@@ -1560,10 +1560,10 @@ rhDial.title = "Red"; gsDial.title = "Green"; bvDial.title = "Blue"; - -+ - DSetRange(&rhDial, 0, 255, rcmap[editColor], 16); - DSetRange(&gsDial, 0, 255, gcmap[editColor], 16); - DSetRange(&bvDial, 0, 255, bcmap[editColor], 16); +- DSetRange(&rhDial, 0, 255, rcmap[editColor], 16); +- DSetRange(&gsDial, 0, 255, gcmap[editColor], 16); +- DSetRange(&bvDial, 0, 255, bcmap[editColor], 16); ++ ++ DSetRange(&rhDial, 0.0, 255.0, (double)rcmap[editColor], 1.0, 16.0); ++ DSetRange(&gsDial, 0.0, 255.0, (double)gcmap[editColor], 1.0, 16.0); ++ DSetRange(&bvDial, 0.0, 255.0, (double)bcmap[editColor], 1.0, 16.0); + + XClearWindow(theDisp, rhDial.win); DRedraw(&rhDial); + XClearWindow(theDisp, gsDial.win); DRedraw(&gsDial); +@@ -1581,9 +1581,9 @@ + &h, &s, &v); + + if (h<0.0) h = 0.0; +- DSetRange(&rhDial, 0, 360, (int) h, 5); +- DSetRange(&gsDial, 0, 100, (int) (s*100), 5); +- DSetRange(&bvDial, 0, 100, (int) (v*100), 5); ++ DSetRange(&rhDial, 0.0, 360.0, h, 1.0, 5.0); ++ DSetRange(&gsDial, 0.0, 100.0, s*100, 1.0, 5.0); ++ DSetRange(&bvDial, 0.0, 100.0, v*100, 1.0, 5.0); + + XClearWindow(theDisp, rhDial.win); DRedraw(&rhDial); + XClearWindow(theDisp, gsDial.win); DRedraw(&gsDial); @@ -1615,12 +1615,12 @@ GammifyColors(); @@ -15724,7 +24163,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c if (hi<0) hi += 360; if (hi>=360) hi -= 360; h = (double) hremap[hi]; -@@ -1884,7 +1884,7 @@ +@@ -1884,14 +1884,14 @@ if (whtHD.enabCB.val) { h = (double) whtHD.stval; s = (double) whtHD.satval / 100.0; @@ -15733,6 +24172,14 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c /* special case: if stval = satval = 0, set hue = -1 */ if (whtHD.stval == 0 && whtHD.satval == 0) h = -1.0; } + } + + /* apply satDial value to s */ +- s = s + ((double) satDial.val) / 100.0; ++ s = s + satDial.val / 100.0; + if (s<0.0) s = 0.0; + if (s>1.0) s = 1.0; + @@ -1899,13 +1899,13 @@ if (DEBUG>1) fprintf(stderr," -> %d,%d,%d",rv,gv,bv); } @@ -15751,7 +24198,7 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c ? white : black; if (DEBUG>1) fprintf(stderr," -> %d,%d,%d\n",rMap[col],gMap[col],bMap[col]); -@@ -2001,8 +2001,8 @@ +@@ -2001,13 +2001,13 @@ { xvbcopy((char *) hmap, (char *) gs->hmap, sizeof(hmap)); @@ -15762,6 +24209,12 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c gs->wht_enab = whtHD.enabCB.val; gs->hueRBnum = RBWhich(hueRB); + +- gs->satval = satDial.val; ++ gs->satval = (int)satDial.val; + GetGrafState(&intGraf,&gs->istate); + GetGrafState(&rGraf, &gs->rstate); + GetGrafState(&gGraf, &gs->gstate); @@ -2042,7 +2042,7 @@ srcHD.ccwise = hm->src_ccw; HDRedraw(&srcHD, HD_ALL | HD_CLEAR); @@ -15780,15 +24233,19 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c if (whtHD.stval != gs->wht_stval || whtHD.satval != gs->wht_satval || -@@ -2063,7 +2063,7 @@ +@@ -2063,9 +2063,9 @@ HDRedraw(&whtHD, HD_ALL | HD_CLEAR); changed++; } - +- if (gs->satval != satDial.val) { +- DSetVal(&satDial,gs->satval); + - if (gs->satval != satDial.val) { - DSetVal(&satDial,gs->satval); ++ if (gs->satval != (int)satDial.val) { ++ DSetVal(&satDial,(double)gs->satval); changed++; + } + @@ -2203,7 +2203,7 @@ } @@ -15927,6 +24384,23 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c /**********************************************/ /************* HUE wheel functions ***********/ +@@ -2435,11 +2435,11 @@ + + /**************************************************/ + static void HDCreate(hd, win, x, y, r, st, en, ccwise, str, fg, bg) +-HDIAL *hd; +-Window win; +-int x,y,r,st,en,ccwise; +-char *str; +-u_long fg,bg; ++ HDIAL *hd; ++ Window win; ++ int x, y, r, st, en, ccwise; ++ const char *str; ++ u_long fg, bg; + { + int i; + @@ -2470,7 +2470,7 @@ hdbpix2[HDB_ROTR] = hdbpix1[HDB_ROTR]; } @@ -15936,7 +24410,14 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c #define BCOLS fg,bg,hicol,locol if (hd->range) { -@@ -2526,7 +2526,7 @@ +@@ -2520,13 +2520,13 @@ + } + + if (flags & HD_FRAME) { +- static char *colstr = "RYGCBM"; ++ static const char *colstr = "RYGCBM"; + char tstr[2]; + XSetForeground(theDisp, theGC, hd->fg); XDrawArc(theDisp, hd->win, theGC, hd->x - HD_RADIUS, hd->y - HD_RADIUS, HD_RADIUS*2, HD_RADIUS*2, 0, 360*64); @@ -16168,6 +24649,15 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c byte *outpic; int min, max, del, h, s, v; int f, p, q, t, vs100, vsf10000; +@@ -3200,7 +3200,7 @@ + + if (whtHD.enabCB.val && whtHD.satval) hsvmod++; + +- if (satDial.val != 0) hsvmod++; ++ if (satDial.val != 0.0) hsvmod++; + + /* check intensity graf */ + for (i=0; i<256; i++) { @@ -3270,7 +3270,7 @@ /* map near-black to black to avoid weird effects */ @@ -16177,6 +24667,15 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c /* apply intGraf.func[] function to 'v' (the intensity) */ v = intGraf.func[v]; +@@ -3284,7 +3284,7 @@ + } + + /* apply satDial value to s */ +- s = s + satDial.val; ++ s = s + (int)satDial.val; + if (s< 0) s = 0; + if (s>100) s = 100; + @@ -3295,7 +3295,7 @@ if (h==NOHUE || !s) { rv = gv = bv = v; } else { @@ -16204,30 +24703,91 @@ diff -ruN xv-3.10a/xvgam.c xv-3.10a-bugfixes/xvgam.c *op++ = gGraf.func[gv]; *op++ = bGraf.func[bv]; } -diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c +diff -ru xv-3.10a/xvgif.c xv-3.10a-enhancements/xvgif.c --- xv-3.10a/xvgif.c 1995-01-10 11:54:41.000000000 -0800 -+++ xv-3.10a-bugfixes/xvgif.c 2005-04-03 11:53:13.000000000 -0700 -@@ -28,13 +28,14 @@ ++++ xv-3.10a-enhancements/xvgif.c 2007-05-13 17:33:51.000000000 -0700 +@@ -28,17 +28,19 @@ typedef int boolean; #define NEXTBYTE (*dataptr++) +#define SKIPBYTE (dataptr++) /* quiet some compiler warnings */ #define EXTENSION 0x21 - #define IMAGESEP 0x2c +-#define IMAGESEP 0x2c ++#define IMAGESEP 0x2c /* a.k.a. Image Descriptor */ #define TRAILER 0x3b #define INTERLACEMASK 0x40 #define COLORMAPMASK 0x80 - -+ - - FILE *fp; - -@@ -82,11 +83,11 @@ - char *id89 = "GIF89a"; - static int EGApalette[16][3] = { +-FILE *fp; + +-int BitOffset = 0, /* Bit Offset of next code */ ++static FILE *fp; ++ ++static int ++ BitOffset = 0, /* Bit Offset of next code */ + XC = 0, YC = 0, /* Output X and Y coords of current pixel */ + Pass = 0, /* Used by output routine if interlaced pic */ + OutCount = 0, /* Decompressor output 'stack count' */ +@@ -46,9 +48,10 @@ + Width, Height, /* image dimensions */ + LeftOfs, TopOfs, /* image offset */ + BitsPerPixel, /* Bits per pixel, read from GIF header */ +- BytesPerScanline, /* bytes per scanline in output raster */ ++/* BytesPerScanline, */ /* bytes per scanline in output raster */ + ColorMapSize, /* number of colors */ + Background, /* background color */ ++ Transparent, /* transparent color (GRR 19980314) */ + CodeSize, /* Code size, read from GIF header */ + InitCodeSize, /* Starting code size, used during Clear */ + Code, /* Value returned by ReadCode */ +@@ -57,47 +60,49 @@ + EOFCode, /* GIF end-of-information code */ + CurCode, OldCode, InCode, /* Decompressor variables */ + FirstFree, /* First free code, generated per GIF spec */ +- FreeCode, /* Decompressor,next free slot in hash table */ ++ FreeCode, /* Decompressor, next free slot in hash table */ + FinChar, /* Decompressor variable */ + BitMask, /* AND mask for data size */ + ReadMask, /* Code AND mask for current code size */ +- Misc; /* miscellaneous bits (interlace, local cmap)*/ ++ Misc, /* miscellaneous bits (interlace, local cmap)*/ ++ GlobalBitsPerPixel, /* may have local colormap of different size */ ++ GlobalColorMapSize, /* (ditto) */ ++ GlobalBitMask; /* (ditto) */ + + +-boolean Interlace, HasColormap; ++static boolean Interlace, HasGlobalColormap; + +-byte *RawGIF; /* The heap array to hold it, raw */ +-byte *Raster; /* The raster data stream, unblocked */ +-byte *pic8; ++static byte *RawGIF; /* The heap array to hold it, raw */ ++static byte *Raster; /* The raster data stream, unblocked */ ++static byte *pic8; + + /* The hash table used by the decompressor */ +-int Prefix[4096]; +-int Suffix[4096]; ++static int Prefix[4096]; ++static int Suffix[4096]; + + /* An output array used by the decompressor */ +-int OutCode[4097]; ++static int OutCode[4097]; + +-int gif89 = 0; +-char *id87 = "GIF87a"; +-char *id89 = "GIF89a"; ++static int gif89 = 0; ++static const char *id87 = "GIF87a"; ++static const char *id89 = "GIF89a"; + +-static int EGApalette[16][3] = { - {0,0,0}, {0,0,128}, {0,128,0}, {0,128,128}, ++static int const EGApalette[16][3] = { + {0,0,0}, {0,0,128}, {0,128,0}, {0,128,128}, {128,0,0}, {128,0,128}, {128,128,0}, {200,200,200}, {100,100,100}, {100,100,255}, {100,255,100}, {100,255,255}, @@ -16237,23 +24797,49 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c static int readImage PARM((PICINFO *)); static int readCode PARM((void)); -@@ -108,12 +109,13 @@ + static void doInterlace PARM((int)); +-static int gifError PARM((PICINFO *, char *)); +-static void gifWarning PARM((char *)); ++static int gifError PARM((PICINFO *, const char *)); ++static void gifWarning PARM((const char *)); + +-int filesize; +-char *bname; +- +-byte *dataptr; ++static int filesize; ++static const char *bname; ++static byte *dataptr; + + + /*****************************/ +@@ -108,17 +113,22 @@ { /* returns '1' if successful */ - register byte ch, ch1, *origptr; + register byte ch, *origptr; register int i, block; - int aspect, gotimage; +- int aspect, gotimage; ++ int aspect; ++ char tmpname[256]; ++ byte r[256], g[256], b[256]; /* initialize variables */ - BitOffset = XC = YC = Pass = OutCount = gotimage = 0; -+ BitOffset = XC = YC = OutCount = gotimage = 0; ++ BitOffset = XC = YC = OutCount = 0; + Pass = -1; RawGIF = Raster = pic8 = NULL; gif89 = 0; ++ Transparent = -1; -@@ -129,16 +131,19 @@ + pinfo->pic = (byte *) NULL; + pinfo->comment = (char *) NULL; ++ pinfo->numpages= 0; + + bname = BaseName(fname); + fp = xv_fopen(fname,"r"); +@@ -129,67 +139,87 @@ fseek(fp, 0L, 2); filesize = ftell(fp); fseek(fp, 0L, 0); @@ -16272,16 +24858,18 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c - return( gifError(pinfo, "not enough memory to read gif file") ); - - if (fread(dataptr, (size_t) filesize, (size_t) 1, fp) != 1) +- return( gifError(pinfo, "GIF data read failed") ); + FatalError("LoadGIF: not enough memory to read GIF file"); -+ + + if (!(Raster = (byte *) calloc((size_t) filesize+256,(size_t) 1))) + FatalError("LoadGIF: not enough memory to read GIF file"); + + if (fread(dataptr, (size_t) filesize, (size_t) 1, fp) != 1) - return( gifError(pinfo, "GIF data read failed") ); ++ return( gifError(pinfo, "GIF data read failed") ); ++ fclose(fp); + origptr = dataptr; -@@ -147,35 +152,35 @@ if (strncmp((char *) dataptr, id87, (size_t) 6)==0) gif89 = 0; else if (strncmp((char *) dataptr, id89, (size_t) 6)==0) gif89 = 1; else return( gifError(pinfo, "not a GIF file")); @@ -16298,15 +24886,22 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c ch = NEXTBYTE; RHeight = ch + 0x100 * NEXTBYTE; - ++ if (DEBUG) fprintf(stderr,"GIF89 logical screen = %d x %d\n",RWidth,RHeight); + ch = NEXTBYTE; - HasColormap = ((ch & COLORMAPMASK) ? True : False); +- HasColormap = ((ch & COLORMAPMASK) ? True : False); - -+ - BitsPerPixel = (ch & 7) + 1; - numcols = ColorMapSize = 1 << BitsPerPixel; - BitMask = ColorMapSize - 1; +- BitsPerPixel = (ch & 7) + 1; +- numcols = ColorMapSize = 1 << BitsPerPixel; +- BitMask = ColorMapSize - 1; - ++ HasGlobalColormap = ((ch & COLORMAPMASK) ? True : False); ++ ++ /* GRR 20070318: fix decoding bug when global and local color-table sizes ++ * differ */ ++ GlobalBitsPerPixel = BitsPerPixel = (ch & 7) + 1; ++ GlobalColorMapSize = ColorMapSize = numcols = 1 << BitsPerPixel; ++ GlobalBitMask = BitMask = ColorMapSize - 1; + Background = NEXTBYTE; /* background color... not used. */ - @@ -16316,6 +24911,8 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c if (!gif89) return(gifError(pinfo,"corrupt GIF file (screen descriptor)")); else normaspect = (float) (aspect + 15) / 64.0; /* gif89 aspect ratio */ if (DEBUG) fprintf(stderr,"GIF89 aspect = %f\n", normaspect); ++ /* FIXME: apparently this _should_ apply to all frames in a multi-image ++ * GIF (i.e., PgUp/PgDn), but it doesn't */ } - - @@ -16323,11 +24920,46 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c + /* Read in global colormap. */ - +- if (HasColormap) + - if (HasColormap) ++ if (HasGlobalColormap) for (i=0; i<ColorMapSize; i++) { - pinfo->r[i] = NEXTBYTE; -@@ -221,19 +226,19 @@ +- pinfo->r[i] = NEXTBYTE; +- pinfo->g[i] = NEXTBYTE; +- pinfo->b[i] = NEXTBYTE; ++ r[i] = NEXTBYTE; ++ g[i] = NEXTBYTE; ++ b[i] = NEXTBYTE; + } +- else { /* no colormap in GIF file */ ++ else { /* no _global_ colormap in GIF file (but may have local one(s)) */ + /* put std EGA palette (repeated 16 times) into colormap, for lack of +- anything better to do */ ++ anything better to do at the moment */ + + for (i=0; i<256; i++) { +- pinfo->r[i] = EGApalette[i&15][0]; +- pinfo->g[i] = EGApalette[i&15][1]; +- pinfo->b[i] = EGApalette[i&15][2]; ++ r[i] = EGApalette[i&15][0]; ++ g[i] = EGApalette[i&15][1]; ++ b[i] = EGApalette[i&15][2]; ++ } ++ } ++ memcpy(pinfo->r, r, sizeof r); ++ memcpy(pinfo->g, g, sizeof g); ++ memcpy(pinfo->b, b, sizeof b); ++ ++ if (DEBUG > 1) { ++ fprintf(stderr," global color table%s:\n", ++ HasGlobalColormap? "":" (repeated EGA palette)"); ++ for (i=0; i<ColorMapSize; i++) { ++ fprintf(stderr," (%3d %02x,%02x,%02x)\n", i, pinfo->r[i], ++ pinfo->g[i], pinfo->b[i]); + } + } + +@@ -221,19 +251,19 @@ if (blocksize == 2) { aspnum = NEXTBYTE; aspden = NEXTBYTE; @@ -16351,7 +24983,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c } } -@@ -254,9 +259,11 @@ +@@ -254,9 +284,11 @@ if (cmtlen>0) { /* build into one un-blocked comment */ @@ -16365,7 +24997,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c sp = cmt; do { sbsize = (*ptr1++); -@@ -267,10 +274,10 @@ +@@ -267,10 +299,10 @@ if (pinfo->comment) { /* have to strcat onto old comments */ cmt1 = (byte *) malloc(strlen(pinfo->comment) + cmtlen + 2); if (!cmt1) { @@ -16378,7 +25010,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c strcpy((char *) cmt1, (char *) pinfo->comment); strcat((char *) cmt1, (char *) "\n"); strcat((char *) cmt1, (char *) cmt); -@@ -288,8 +295,8 @@ +@@ -288,8 +320,8 @@ else if (fn == 0x01) { /* PlainText Extension */ int j,sbsize,ch; int tgLeft, tgTop, tgWidth, tgHeight, cWidth, cHeight, fg, bg; @@ -16389,7 +25021,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c "PlainText extension found in GIF file. Ignored."); sbsize = NEXTBYTE; -@@ -302,12 +309,12 @@ +@@ -302,12 +334,12 @@ fg = NEXTBYTE; bg = NEXTBYTE; i=12; @@ -16405,20 +25037,39 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c /* read (and ignore) data sub-blocks */ do { j = 0; -@@ -326,16 +333,16 @@ +@@ -326,16 +358,32 @@ if (DEBUG) fprintf(stderr,"Graphic Control extension\n\n"); - SetISTR(ISTR_INFO, "%s: %s", bname, -+ SetISTR(ISTR_INFO, "%s: %s", bname, - "Graphic Control Extension in GIF file. Ignored."); +- "Graphic Control Extension in GIF file. Ignored."); - +- /* read (and ignore) data sub-blocks */ ++ SetISTR(ISTR_INFO, "%s: %s", bname, ++ "Graphic Control Extension ignored."); + - /* read (and ignore) data sub-blocks */ ++ /* read (and ignore) data sub-blocks, unless compositing with ++ * user-defined background */ do { - j = 0; sbsize = NEXTBYTE; +- j = 0; sbsize = NEXTBYTE; - while (j<sbsize) { NEXTBYTE; j++; } -+ while (j<sbsize) { SKIPBYTE; j++; } ++ j = 0; ++ sbsize = NEXTBYTE; ++ /* GRR 19980314: get transparent index out of block */ ++ if (have_imagebg && sbsize == 4 && Transparent < 0) { ++ byte packed_fields = NEXTBYTE; ++ ++ j++; ++ SKIPBYTE; j++; ++ SKIPBYTE; j++; ++ if (packed_fields & 1) { ++ Transparent = NEXTBYTE; ++ j++; ++ } ++ } ++ while (j<sbsize) { ++ SKIPBYTE; j++; ++ } } while (sbsize); } - @@ -16426,7 +25077,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c else if (fn == 0xFF) { /* Application Extension */ int j, sbsize; -@@ -345,10 +352,10 @@ +@@ -345,10 +393,10 @@ /* read (and ignore) data sub-blocks */ do { j = 0; sbsize = NEXTBYTE; @@ -16439,7 +25090,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c else { /* unknown extension */ int j, sbsize; -@@ -358,11 +365,11 @@ +@@ -358,48 +406,68 @@ SetISTR(ISTR_INFO, "%s: Unknown extension 0x%02x in GIF file. Ignored.", bname, fn); @@ -16453,71 +25104,146 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c } while (sbsize); } } -@@ -370,36 +377,36 @@ + else if (block == IMAGESEP) { - if (DEBUG) fprintf(stderr,"imagesep (got=%d) ",gotimage); +- if (DEBUG) fprintf(stderr,"imagesep (got=%d) ",gotimage); - if (DEBUG) fprintf(stderr," at start: offset=0x%lx\n",dataptr-RawGIF); -+ if (DEBUG) fprintf(stderr," at start: offset=0x%x\n",dataptr-RawGIF); - - if (gotimage) { /* just skip over remaining images */ - int i,misc,ch,ch1; - - /* skip image header */ +- +- if (gotimage) { /* just skip over remaining images */ +- int i,misc,ch,ch1; +- +- /* skip image header */ - NEXTBYTE; NEXTBYTE; /* left position */ - NEXTBYTE; NEXTBYTE; /* top position */ - NEXTBYTE; NEXTBYTE; /* width */ - NEXTBYTE; NEXTBYTE; /* height */ -+ SKIPBYTE; SKIPBYTE; /* left position */ -+ SKIPBYTE; SKIPBYTE; /* top position */ -+ SKIPBYTE; SKIPBYTE; /* width */ -+ SKIPBYTE; SKIPBYTE; /* height */ - misc = NEXTBYTE; /* misc. bits */ - - if (misc & 0x80) { /* image has local colormap. skip it */ - for (i=0; i< 1 << ((misc&7)+1); i++) { +- misc = NEXTBYTE; /* misc. bits */ +- +- if (misc & 0x80) { /* image has local colormap. skip it */ +- for (i=0; i< 1 << ((misc&7)+1); i++) { - NEXTBYTE; NEXTBYTE; NEXTBYTE; -+ SKIPBYTE; SKIPBYTE; SKIPBYTE; ++ if (DEBUG) fprintf(stderr, "imagesep (page=%d)\n", pinfo->numpages+1); ++ if (DEBUG) fprintf(stderr, " at start: offset=0x%lx\n", ++ (unsigned long)(dataptr-RawGIF)); ++ ++ BitOffset = XC = YC = Pass = OutCount = 0; ++ ++ if (pinfo->numpages > 0) { /* do multipage stuff */ ++ if (pinfo->numpages == 1) { /* first time only... */ ++ xv_mktemp(pinfo->pagebname, "xvpgXXXXXX"); // a.k.a. close(mkstemp()) ++ if (pinfo->pagebname[0] == '\0') { ++ ErrPopUp("LoadGIF: Unable to create temporary filename???", ++ "\nHow unlikely!"); ++ return 0; ++ } ++ /* GRR 20070328: basename file doesn't go away, at least on Linux ++ * (though all appended-number ones do); ergo, open for reading (see ++ * if it's there), close, and explicitly unlink() if necessary */ ++ /* GRR 20070506: could/should call KillPageFiles() (xv.c) instead */ ++ fp = xv_fopen(pinfo->pagebname, "r"); ++ if (fp) { ++ fclose(fp); ++ unlink(pinfo->pagebname); /* no errors during testing */ } } - +- - NEXTBYTE; /* minimum code size */ -+ SKIPBYTE; /* minimum code size */ - - /* skip image data sub-blocks */ - do { - ch = ch1 = NEXTBYTE; +- +- /* skip image data sub-blocks */ +- do { +- ch = ch1 = NEXTBYTE; - while (ch--) NEXTBYTE; -+ while (ch--) SKIPBYTE; - if ((dataptr - RawGIF) > filesize) break; /* EOF */ - } while(ch1); - } - - else if (readImage(pinfo)) gotimage = 1; +- if ((dataptr - RawGIF) > filesize) break; /* EOF */ +- } while(ch1); +- } +- +- else if (readImage(pinfo)) gotimage = 1; - if (DEBUG) fprintf(stderr," at end: dataptr=0x%lx\n",dataptr-RawGIF); -+ if (DEBUG) fprintf(stderr," at end: dataptr=0x%x\n",dataptr-RawGIF); ++ sprintf(tmpname, "%s%d", pinfo->pagebname, pinfo->numpages); ++ fp = xv_fopen(tmpname, "w"); ++ if (!fp) { ++ ErrPopUp("LoadGIF: Unable to open temp file", "\nDang!"); ++ return 0; ++ } ++ if (WriteGIF(fp, pinfo->pic, pinfo->type, pinfo->w, pinfo->h, pinfo->r, ++ pinfo->g, pinfo->b, numcols, pinfo->colType, NULL)) { ++ fclose(fp); ++ ErrPopUp("LoadGIF: Error writing temp file", "\nBummer!"); ++ return 0; ++ } ++ fclose(fp); ++ free(pinfo->pic); ++ pinfo->pic = (byte *) NULL; ++ if (HasGlobalColormap) { ++ memcpy(pinfo->r, r, sizeof r); ++ memcpy(pinfo->g, g, sizeof g); ++ memcpy(pinfo->b, b, sizeof b); ++ } ++ BitsPerPixel = GlobalBitsPerPixel; ++ numcols = ColorMapSize = GlobalColorMapSize; ++ BitMask = GlobalBitMask; ++ } ++ if (readImage(pinfo)) ++pinfo->numpages; ++ if (DEBUG) fprintf(stderr, " at end: offset=0x%lx\n", ++ (unsigned long)(dataptr-RawGIF)); } -@@ -415,7 +422,7 @@ - +@@ -416,9 +484,9 @@ /* don't mention bad block if file was trunc'd, as it's all bogus */ if ((dataptr - origptr) < filesize) { -- sprintf(str, "Unknown block type (0x%02x) at offset 0x%lx", -+ sprintf(str, "Unknown block type (0x%02x) at offset 0x%x", - block, (dataptr - origptr) - 1); + sprintf(str, "Unknown block type (0x%02x) at offset 0x%lx", +- block, (dataptr - origptr) - 1); ++ block, (unsigned long)(dataptr - origptr) - 1); - if (!gotimage) return gifError(pinfo, str); -@@ -431,7 +438,7 @@ +- if (!gotimage) return gifError(pinfo, str); ++ if (!pinfo->numpages) return gifError(pinfo, str); + else gifWarning(str); + } + +@@ -431,8 +499,34 @@ free(RawGIF); RawGIF = NULL; free(Raster); Raster = NULL; - if (!gotimage) -+ if (!gotimage) ++ if (!pinfo->numpages) return( gifError(pinfo, "no image data found in GIF file") ); ++ if (pinfo->numpages > 1) { ++ /* write the last page temp file */ ++ int numpages = pinfo->numpages; ++ char *comment = pinfo->comment; ++ sprintf(tmpname, "%s%d", pinfo->pagebname, pinfo->numpages); ++ fp = xv_fopen(tmpname, "w"); ++ if (!fp) { ++ ErrPopUp("LoadGIF: Unable to open temp file", "\nDang!"); ++ return 0; ++ } ++ if (WriteGIF(fp, pinfo->pic, pinfo->type, pinfo->w, pinfo->h, pinfo->r, ++ pinfo->g, pinfo->b, numcols, pinfo->colType, NULL)) { ++ fclose(fp); ++ ErrPopUp("LoadGIF: Error writing temp file", "\nBummer!"); ++ return 0; ++ } ++ fclose(fp); ++ free(pinfo->pic); ++ pinfo->pic = (byte *) NULL; ++ ++ /* load the first page temp file */ ++ sprintf(tmpname, "%s%d", pinfo->pagebname, 1); ++ i = LoadGIF(tmpname, pinfo); ++ pinfo->numpages = numpages; ++ pinfo->comment = comment; ++ } return 1; -@@ -448,7 +455,7 @@ + } +@@ -444,11 +538,12 @@ + { + register byte ch, ch1, *ptr1, *picptr; + int i, npixels, maxpixels; ++ boolean HasLocalColormap; + npixels = maxpixels = 0; /* read in values from the image descriptor */ @@ -16526,9 +25252,36 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c ch = NEXTBYTE; LeftOfs = ch + 0x100 * NEXTBYTE; ch = NEXTBYTE; -@@ -472,33 +479,33 @@ +@@ -460,45 +555,68 @@ + + Misc = NEXTBYTE; + Interlace = ((Misc & INTERLACEMASK) ? True : False); ++ HasLocalColormap = ((Misc & COLORMAPMASK) ? True : False); + +- if (Misc & 0x80) { +- for (i=0; i< 1 << ((Misc&7)+1); i++) { ++ if (HasLocalColormap) { ++ BitsPerPixel = (Misc & 7) + 1; ++ ColorMapSize = numcols = 1 << BitsPerPixel; /* GRR 20070318 */ ++ BitMask = ColorMapSize - 1; ++ if (DEBUG) fprintf(stderr," local color table, %d bits (%d entries)\n", ++ (Misc&7)+1, ColorMapSize); ++ for (i=0; i<ColorMapSize; i++) { + pinfo->r[i] = NEXTBYTE; + pinfo->g[i] = NEXTBYTE; + pinfo->b[i] = NEXTBYTE; + } ++ if (DEBUG > 1) { ++ for (i=0; i<ColorMapSize; i++) { ++ fprintf(stderr," (%3d %02x,%02x,%02x)\n", i, pinfo->r[i], ++ pinfo->g[i], pinfo->b[i]); ++ } ++ } + } - if (!HasColormap && !(Misc&0x80)) { + +- if (!HasColormap && !(Misc&0x80)) { ++ if (!HasGlobalColormap && !HasLocalColormap) { /* no global or local colormap */ - SetISTR(ISTR_WARNING, "%s: %s", bname, + SetISTR(ISTR_WARNING, "%s: %s", bname, @@ -16538,6 +25291,17 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c - + ++ /* GRR 19980314 */ ++ /* need not worry about size of EGA palette: full 256 colors */ ++ if (have_imagebg && Transparent >= 0 && ++ Transparent < ((Misc&0x80)? (1 << ((Misc&7)+1)) : ColorMapSize) ) ++ { ++ pinfo->r[Transparent] = (imagebgR >> 8); ++ pinfo->g[Transparent] = (imagebgG >> 8); ++ pinfo->b[Transparent] = (imagebgB >> 8); ++ } ++ ++ + /* Start reading the raster data. First we get the intial code size * and compute decompressor constant values, based on this code size. @@ -16567,7 +25331,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c /* UNBLOCK: -@@ -506,7 +513,7 @@ +@@ -506,7 +624,7 @@ * to the Raster array, turning it from a series of blocks into one long * data stream, which makes life much easier for readCode(). */ @@ -16576,8 +25340,12 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c ptr1 = Raster; do { ch = ch1 = NEXTBYTE; -@@ -525,18 +532,21 @@ - fprintf(stderr,"xv: LoadGIF() - picture is %dx%d, %d bits, %sinterlaced\n", +@@ -522,21 +640,24 @@ + + + if (DEBUG) { +- fprintf(stderr,"xv: LoadGIF() - picture is %dx%d, %d bits, %sinterlaced\n", ++ fprintf(stderr,"LoadGIF: image is %dx%d, %d bits, %sinterlaced\n", Width, Height, BitsPerPixel, Interlace ? "" : "non-"); } - @@ -16591,7 +25359,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c picptr = pic8 = (byte *) malloc((size_t) maxpixels); - if (!pic8) return( gifError(pinfo, "couldn't malloc 'pic8'") ); + if (!pic8) FatalError("LoadGIF: couldn't malloc 'pic8'"); -+ ++ + - @@ -16603,7 +25371,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c Code = readCode(); while (Code != EOFCode) { /* Clear code sets everything back to its initial value, then reads the -@@ -563,58 +573,58 @@ +@@ -563,58 +684,58 @@ break; } CurCode = InCode = Code; @@ -16674,7 +25442,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c FreeCode++; if (FreeCode >= MaxCode) { if (CodeSize < 12) { -@@ -627,7 +637,7 @@ +@@ -627,20 +748,19 @@ Code = readCode(); if (npixels >= maxpixels) break; } @@ -16683,7 +25451,14 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c if (npixels != maxpixels) { SetISTR(ISTR_WARNING,"%s: %s", bname, "This GIF file seems to be truncated. Winging it."); -@@ -640,7 +650,7 @@ + if (!Interlace) /* clear->EOBuffer */ +- xvbzero((char *) pic8+npixels, (size_t) (maxpixels-npixels)); ++ xvbzero((char *) pic8+npixels, ++ (size_t) (maxpixels-npixels<0 ? 0 : maxpixels-npixels)); + } + +- fclose(fp); +- /* fill in the PICINFO structure */ pinfo->pic = pic8; @@ -16692,7 +25467,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c pinfo->h = Height; pinfo->type = PIC8; pinfo->frmType = F_GIF; -@@ -650,8 +660,8 @@ +@@ -650,8 +770,8 @@ sprintf(pinfo->fullInfo, "GIF%s, %d bit%s per pixel, %sinterlaced. (%d bytes)", @@ -16703,7 +25478,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c Interlace ? "" : "non-", filesize); sprintf(pinfo->shrtInfo, "%dx%d GIF%s.",Width,Height,(gif89) ? "89" : "87"); -@@ -668,13 +678,13 @@ +@@ -668,13 +788,13 @@ * maintain our location in the Raster array as a BIT Offset. We compute * the byte Offset into the raster array by dividing this by 8, pick up * three bytes, compute the bit Offset into our 24-bit chunk, shift to @@ -16719,7 +25494,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c ByteOffset = BitOffset / 8; RawCode = Raster[ByteOffset] + (Raster[ByteOffset + 1] << 8); if (CodeSize >= 8) -@@ -692,42 +702,47 @@ +@@ -692,42 +812,47 @@ { static byte *ptr = NULL; static int oldYC = -1; @@ -16778,7 +25553,7 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c default: break; } -@@ -735,7 +750,7 @@ +@@ -735,11 +860,11 @@ } @@ -16786,10 +25561,25 @@ diff -ruN xv-3.10a/xvgif.c xv-3.10a-bugfixes/xvgif.c + /*****************************/ static int gifError(pinfo, st) - PICINFO *pinfo; -diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c +- PICINFO *pinfo; +- char *st; ++ PICINFO *pinfo; ++ const char *st; + { + gifWarning(st); + +@@ -760,7 +885,7 @@ + + /*****************************/ + static void gifWarning(st) +- char *st; ++ const char *st; + { + SetISTR(ISTR_WARNING,"%s: %s", bname, st); + } +diff -ru xv-3.10a/xvgifwr.c xv-3.10a-enhancements/xvgifwr.c --- xv-3.10a/xvgifwr.c 1995-01-03 13:22:21.000000000 -0800 -+++ xv-3.10a-bugfixes/xvgifwr.c 2004-05-16 18:03:27.000000000 -0700 ++++ xv-3.10a-enhancements/xvgifwr.c 2007-03-31 16:33:23.000000000 -0700 @@ -2,11 +2,11 @@ * xvgifwr.c - handles writing of GIF files. based on flgife.c and * flgifc.c from the FBM Library, by Michael Maudlin @@ -16821,7 +25611,26 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c static void putword PARM((int, FILE *)); static void compress PARM((int, FILE *, byte *, int)); -@@ -97,7 +96,7 @@ +@@ -56,7 +55,7 @@ + static void flush_char PARM((void)); + + +-static byte pc2nc[256],r1[256],g1[256],b1[256]; ++static byte pc2nc[256]; + + + /*************************************************************/ +@@ -74,7 +73,8 @@ + int ColorMapSize, InitCodeSize, Background, BitsPerPixel; + int i,j,nc; + byte *pic8; +- byte rtemp[256],gtemp[256],btemp[256]; ++ byte rtemp[256],gtemp[256],btemp[256]; /* for 24-bit to 8-bit conversion */ ++ byte r1[256],g1[256],b1[256]; /* for duplicated-color remapping */ + + if (ptype == PIC24) { /* have to quantize down to 8 bits */ + pic8 = Conv24to8(pic, w, h, 256, rtemp,gtemp,btemp); +@@ -97,7 +97,7 @@ for (i=0; i<numcols; i++) { /* see if color #i is already used */ for (j=0; j<i; j++) { @@ -16830,7 +25639,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c bmap[i] == bmap[j]) break; } -@@ -115,15 +114,15 @@ +@@ -115,15 +115,15 @@ /* figure out 'BitsPerPixel' */ for (i=1; i<8; i++) if ( (1<<i) >= nc) break; @@ -16849,7 +25658,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c CountDown = w * h; /* # of pixels we'll be doing */ if (BitsPerPixel <= 1) InitCodeSize = 2; -@@ -137,7 +136,7 @@ +@@ -137,7 +137,7 @@ return (1); } @@ -16858,7 +25667,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c fprintf(stderr,"WrGIF: pic=%lx, w,h=%dx%d, numcols=%d, Bits%d,Cmap=%d\n", (u_long) pic8, w,h,numcols,BitsPerPixel,ColorMapSize); -@@ -152,7 +151,7 @@ +@@ -152,7 +152,7 @@ i = 0x80; /* Yes, there is a color map */ i |= (8-1)<<4; /* OR in the color resolution (hardwired 8) */ i |= (BitsPerPixel - 1); /* OR in the # of bits per pixel */ @@ -16867,7 +25676,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c fputc(Background, fp); /* background color */ -@@ -290,7 +289,7 @@ +@@ -290,7 +290,7 @@ /* * compress stdin to stdout * @@ -16876,7 +25685,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c * prefix code / next character combination. We do a variant of Knuth's * algorithm D (vol. 3, sec. 6.4) along with G. Knott's relatively-prime * secondary probe. Here, the modular division first probe is gives way -@@ -370,7 +369,7 @@ +@@ -370,7 +370,7 @@ cl_hash( (count_int) hsize_reg); /* clear hash table */ output(ClearCode); @@ -16885,7 +25694,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c while (len) { c = pc2nc[*data++]; len--; in_count++; -@@ -399,7 +398,7 @@ +@@ -399,7 +399,7 @@ continue; } @@ -16894,7 +25703,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c goto probe; nomatch: -@@ -454,7 +453,7 @@ +@@ -454,7 +454,7 @@ cur_accum |= ((long)code << cur_bits); else cur_accum = code; @@ -16903,7 +25712,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c cur_bits += n_bits; while( cur_bits >= 8 ) { -@@ -482,7 +481,7 @@ +@@ -482,7 +482,7 @@ maxcode = MAXCODE(n_bits); } } @@ -16912,7 +25721,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c if( code == EOFCode ) { /* At EOF, write the rest of the buffer */ while( cur_bits > 0 ) { -@@ -492,11 +491,11 @@ +@@ -492,11 +492,11 @@ } flush_char(); @@ -16926,7 +25735,7 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c FatalError("unable to write GIF file"); #endif } -@@ -582,7 +581,7 @@ +@@ -582,7 +582,7 @@ int c; { accum[ a_count++ ] = c; @@ -16935,15 +25744,15 @@ diff -ruN xv-3.10a/xvgifwr.c xv-3.10a-bugfixes/xvgifwr.c flush_char(); } -@@ -596,4 +595,4 @@ +@@ -596,4 +596,4 @@ fwrite(accum, (size_t) 1, (size_t) a_count, g_outfile ); a_count = 0; } -} +} -diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c +diff -ru xv-3.10a/xvgrab.c xv-3.10a-enhancements/xvgrab.c --- xv-3.10a/xvgrab.c 1994-12-22 14:34:47.000000000 -0800 -+++ xv-3.10a-bugfixes/xvgrab.c 2004-05-16 18:03:30.000000000 -0700 ++++ xv-3.10a-enhancements/xvgrab.c 2005-04-25 23:39:32.000000000 -0700 @@ -6,7 +6,7 @@ * Contains: * int Grab() - handles the GRAB command @@ -16953,7 +25762,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c */ #include "copyright.h" -@@ -14,29 +14,54 @@ +@@ -14,28 +14,60 @@ #define NEEDSTIME #include "xv.h" @@ -16976,20 +25785,27 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c -static int lowbitnum PARM((unsigned long)); -static int getxcolors PARM((XWindowAttributes *, XColor **)); -static Window xvClientWindow PARM((Display *, Window)); -+ ++/* Allow flexibility in use of buttons JPD */ ++#define WINDOWGRABMASK Button1Mask /* JPD prefers Button2Mask */ ++#define RECTGTRACKMASK Button2Mask /* JPD prefers Button1Mask*/ ++#define CANCELGRABMASK Button3Mask + ++#define DO_GRABFLASH /* JPD prefers not to do that; just a loss of time ... */ + + +union swapun { + CARD32 l; + CARD16 s; + CARD8 b[sizeof(CARD32)]; +}; - - ++ ++ +struct rectlist { + int x,y,w,h; + struct rectlist *next; +}; - - ++ ++ +static byte *grabPic = (byte *) NULL; +static int gptype; +static byte grabmapR[256], grabmapG[256], grabmapB[256]; @@ -17023,21 +25839,30 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c + +static int Trivial24to8 PARM((byte *, int, int, byte *, + byte *, byte *, byte *, int)); -+ + /***********************************/ int Grab() - { -@@ -45,8 +70,7 @@ +@@ -44,13 +76,15 @@ + 0 if cancelled */ int i, x, y, x1, y1, x2, y2, ix, iy, iw, ih, rv; - int rx, ry, pretendGotB1, autograb; +- int rx, ry, pretendGotB1, autograb; - int oldaclose; - Window rW, cW, clickWin, tmpwin; ++ int rx, ry, GotButton, autograb; ++ int cancelled = 0; + Window rW, cW, clickWin; unsigned int mask; ++#ifdef RECOLOR_GRAB_CURSOR XColor fc, bc; ++#endif -@@ -75,7 +99,7 @@ +- pretendGotB1 = 0; ++ GotButton = 0; + + if (grabInProgress) return 0; /* avoid recursive grabs during delay */ + +@@ -75,7 +109,7 @@ grabInProgress = 1; /* guard against recursive grabs during delay */ time(&startT); while (1) { @@ -17046,7 +25871,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c if (t >= startT + grabDelay) break; if (XPending(theDisp)>0) { XEvent evt; -@@ -91,25 +115,25 @@ +@@ -91,25 +125,33 @@ grabInProgress = 0; } @@ -17059,17 +25884,26 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c free(grabPic); grabPic = (byte *) NULL; } - +- ++ /* recolor cursor to indicate that grabbing is active? */ ++ /* Instead, change cursor JPD */ ++#ifdef RECOLOR_GRAB_CURSOR fc.flags = bc.flags = DoRed | DoGreen | DoBlue; - fc.red = fc.green = fc.blue = 0xffff; + fc.red = fc.green = fc.blue = 0xffff; bc.red = bc.green = bc.blue = 0x0000; XRecolorCursor(theDisp, tcross, &fc, &bc); ++#endif XBell(theDisp, 0); /* beep once at start of grab */ - if (!autograb) XGrabButton(theDisp, (u_int) AnyButton, 0, rootW, False, 0, ++ /* Change cursor to top_left_corner JPD */ ++ XGrabPointer(theDisp, rootW, False, ++ PointerMotionMask|ButtonPressMask|ButtonReleaseMask, ++ GrabModeAsync, GrabModeAsync, None, tlcorner, CurrentTime); ++ + if (!autograb) XGrabButton(theDisp, (u_int) AnyButton, 0, rootW, False, 0, GrabModeAsync, GrabModeSync, None, tcross); - @@ -17077,7 +25911,16 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c if (autograb) { XGrabServer(theDisp); /* until we've done the grabImage */ if (!XQueryPointer(theDisp,rootW,&rW,&cW,&rx,&ry,&x1,&y1,&mask)) { -@@ -136,7 +160,7 @@ +@@ -118,7 +160,7 @@ + rv = 0; + goto exit; + } +- else { pretendGotB1 = 1; mask = Button1Mask; } ++ else { GotButton = 1; mask = WINDOWGRABMASK; } + } + + else { /* !autograb */ +@@ -136,7 +178,7 @@ XNextEvent(theDisp, &evt); i = HandleEvent(&evt, &done); if (done) { /* only 'new image' cmd accepted=quit */ @@ -17086,24 +25929,30 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c XUngrabButton(theDisp, (u_int) AnyButton, 0, rootW); Quit(0); } -@@ -145,12 +169,12 @@ +@@ -145,99 +187,75 @@ } } - - + ++ XUngrabPointer(theDisp, CurrentTime); ++ /* Reset cursor to XC_tcross JPD */ ++ XGrabPointer(theDisp, rootW, False, ++ PointerMotionMask|ButtonPressMask|ButtonReleaseMask, ++ GrabModeAsync, GrabModeAsync, None, tcross, CurrentTime); + /*** *** got button click (or pretending we did, if autograb) ***/ - -+ - if (mask & Button3Mask || rW!=rootW) { /* Button3: CANCEL GRAB */ +- if (mask & Button3Mask || rW!=rootW) { /* Button3: CANCEL GRAB */ ++ if (mask & CANCELGRABMASK || rW!=rootW) { /* CANCEL GRAB */ while (1) { /* wait for button to be released */ -@@ -158,7 +182,7 @@ - if (!(mask & Button3Mask)) break; + if (XQueryPointer(theDisp,rootW,&rW,&cW,&rx,&ry,&x1,&y1,&mask)) { +- if (!(mask & Button3Mask)) break; ++ if (!(mask & CANCELGRABMASK)) break; } } - @@ -17111,8 +25960,21 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c XUngrabButton(theDisp, (u_int) AnyButton, 0, rootW); XBell(theDisp, 0); XBell(theDisp, 0); -@@ -175,69 +199,40 @@ - if (!(mask & Button1Mask)) break; + rv = 0; ++ cancelled = 1; + goto exit; + } + + +- +- if (mask & Button1Mask) { /* Button1: GRAB WINDOW (& FRAME, maybe) */ +- while (!pretendGotB1) { /* wait for button to be released, if clicked */ ++ if (mask & WINDOWGRABMASK) { /* GRAB WINDOW (& FRAME, maybe) */ ++ while (!GotButton) { /* wait for button to be released, if clicked */ + int rx,ry,x1,y1; Window rW, cW; + if (XQueryPointer(theDisp,rootW,&rW,&cW,&rx,&ry,&x1,&y1,&mask)) { +- if (!(mask & Button1Mask)) break; ++ if (!(mask & WINDOWGRABMASK)) break; } } - @@ -17148,6 +26010,8 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c - - + ++ grabwin: ++ + clickWin = (cW) ? cW : rootW; + if (clickWin == rootW) { /* grab entire screen */ @@ -17178,7 +26042,6 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c - - + -+ /* range checking: keep rectangle fully on-screen */ if (ix<0) { iw += ix; ix = 0; } if (iy<0) { ih += iy; iy = 0; } @@ -17194,9 +26057,13 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c /* flash the rectangle a bit... */ startflash(); for (i=0; i<5; i++) { -@@ -252,13 +247,12 @@ +@@ -249,23 +267,21 @@ + endflash(); + } - else { /* Button2: TRACK A RECTANGLE */ +- +- else { /* Button2: TRACK A RECTANGLE */ ++ else { /* TRACK A RECTANGLE */ int origrx, origry; - Window origcW; @@ -17210,7 +26077,15 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c XGrabServer(theDisp); startflash(); -@@ -276,51 +270,36 @@ + /* Wait for button release while tracking rectangle on screen */ + while (1) { + if (XQueryPointer(theDisp,rootW,&rW,&cW,&rx,&ry,&x,&y,&mask)) { +- if (!(mask & Button2Mask)) break; ++ if (!(mask & RECTGTRACKMASK)) break; + } + + flashrect(ix, iy, iw, ih, 0); /* turn off rect */ +@@ -276,57 +292,63 @@ iw = abs(rx - x1); ih = abs(ry - y1); x2 = rx; y2 = ry; } @@ -17221,6 +26096,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c flashrect(ix, iy, iw, ih, 0); /* turn off rect */ + ++#ifdef DO_GRABFLASH + /* flash the rectangle a bit... */ + for (i=0; i<5; i++) { + flashrect(ix, iy, iw, ih, 1); @@ -17228,10 +26104,11 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c + flashrect(ix, iy, iw, ih, 0); + XFlush(theDisp); Timer(100); + } ++#endif ++ endflash(); - -+ - XUngrabServer(theDisp); +- XUngrabServer(theDisp); - - - if (origcW == cW) { /* maybe it's entirely in one window??? */ @@ -17256,13 +26133,25 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c - if (DEBUG) fprintf(stderr,"\n"); - } - else clickWin = rootW; -- } ++ ++ /* if rectangle has zero width or height, search for child window JPD */ ++ if (iw==0 && ih==0) { ++ int xr, yr; ++ Window childW = 0; ++ if (rW && cW) ++ XTranslateCoordinates(theDisp, rW, cW, rx, ry, &xr, &yr, &childW); ++ if (childW) ++ cW = childW; ++ goto grabwin; + } ++ ++ XUngrabServer(theDisp); } - -+ /*** - *** now that clickWin,ix,iy,iw,ih are known, try to grab the bits... ++ *** now that clickWin,ix,iy,iw,ih are known, try to grab the bits : + *** grab screen area (ix,iy,iw,ih) ***/ @@ -17277,7 +26166,21 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c SetCursors(-1); -@@ -337,25 +316,25 @@ +- + exit: + ++ XUngrabPointer(theDisp, CurrentTime); ++ XUngrabServer(theDisp); ++ ++ if (startGrab) { ++ startGrab = 0; ++ if (cancelled) Quit(0); ++ } ++ + if (hidewins) { /* remap XV windows */ + autoclose += 2; /* force it on once */ + if (mainW && dispMode == RMB_WINDOW) { +@@ -337,25 +359,25 @@ if (DEBUG) fprintf(stderr,"==remapped mainW. waiting for Config.\n"); @@ -17310,7 +26213,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c else if (ctrlW) CtrlBox(1); } -@@ -364,6 +343,45 @@ +@@ -364,6 +386,45 @@ /***********************************/ @@ -17356,7 +26259,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c static void flashrect(x,y,w,h,show) int x,y,w,h,show; { -@@ -373,7 +391,7 @@ +@@ -373,7 +434,7 @@ XSetPlaneMask(theDisp, rootGC, xorMasks[maskno]); if (!show) { /* turn off rectangle */ @@ -17365,7 +26268,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c XDrawRectangle(theDisp, rootW, rootGC, x, y, (u_int) w-1, (u_int) h-1); isvis = 0; -@@ -391,15 +409,16 @@ +@@ -391,15 +452,16 @@ /***********************************/ static void startflash() @@ -17384,7 +26287,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c XSetFunction(theDisp, rootGC, GXcopy); XSetSubwindowMode(theDisp, rootGC, ClipByChildren); XSetPlaneMask(theDisp, rootGC, AllPlanes); -@@ -408,21 +427,157 @@ +@@ -408,21 +470,157 @@ /***********************************/ @@ -17552,7 +26455,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c /* range checking */ if (x<0) { w += x; x = 0; } -@@ -430,86 +585,246 @@ +@@ -430,86 +628,246 @@ if (x+w>dispWIDE) w = dispWIDE-x; if (y+h>dispHIGH) h = dispHIGH-y; @@ -17629,19 +26532,19 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c + } + regrabList = (struct rectlist *) NULL; + } -+ -+ if (i) { -+ ErrPopUp("Warning: Problems occurred during grab.","\nWYSInWYG!"); -+ return 0; -+ } - /* DO *NOT* use xvDestroyImage(), as the 'data' field was alloc'd by X, not - necessarily through 'malloc() / free()' */ - XDestroyImage(image); - - if (colors) free((char *) colors); ++ if (i) { ++ ErrPopUp("Warning: Problems occurred during grab.","\nWYSInWYG!"); ++ return 0; ++ } - return i; ++ + /* if 256 or fewer colors in grabPic, make it a PIC8 */ + i = CountColors24(grabPic, gWIDE, gHIGH, 0,0,gWIDE,gHIGH); + if (i<=256) { @@ -17842,7 +26745,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c /* this code owes a lot to 'xwdtopnm.c', part of the pbmplus package, written by Jef Poskanzer */ -@@ -528,7 +843,6 @@ +@@ -528,7 +886,6 @@ int isLsbMachine, flipBytes; Visual *visual; char errstr[256]; @@ -17850,7 +26753,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c /* quiet compiler warnings */ -@@ -538,20 +852,20 @@ +@@ -538,20 +895,20 @@ pixvalue = 0; rmask = gmask = bmask = 0; rshift = gshift = bshift = 0; @@ -17877,7 +26780,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c ? "XYPixmap" : "ZPixmap"); fprintf(stderr,"byte_order = %s, bitmap_bit_order = %s, unit=%d, pad=%d\n", -@@ -575,41 +889,17 @@ +@@ -575,41 +932,17 @@ sprintf(errstr, "%s\nReturned image bitmap_unit (%d) non-standard.", "Can't deal with this display.", image->bitmap_unit); ErrPopUp(errstr, "\nThat Sucks!"); @@ -17921,7 +26824,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c if (visual->class == TrueColor || visual->class == DirectColor) { unsigned int tmp; -@@ -634,16 +924,35 @@ +@@ -634,16 +967,35 @@ while (tmp >= 256) { tmp >>= 1; b8shift -= 1; } while (tmp < 128) { tmp <<= 1; b8shift += 1; } @@ -17960,7 +26863,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c if (bits_per_pixel == 32) pixmask = 0xffffffff; else pixmask = (((CARD32) 1) << bits_per_pixel) - 1; -@@ -652,14 +961,15 @@ +@@ -652,14 +1004,15 @@ /* if we're on an lsbfirst machine, or the image came from an lsbfirst machine, we should flip the bytes around. NOTE: if we're on an @@ -17978,7 +26881,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c lineptr = (byte *) image->data + (i * image->bytes_per_line); bptr = ((CARD8 *) lineptr) - 1; sptr = ((CARD16 *) lineptr) - 1; -@@ -667,35 +977,39 @@ +@@ -667,35 +1020,39 @@ bits_used = bits_per_item; for (j=0; j<image->width; j++) { @@ -18042,7 +26945,7 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c bits_used = 0; if (bit_order == MSBFirst) bit_shift = bits_per_item - bits_per_pixel; else bit_shift = 0; -@@ -711,11 +1025,11 @@ +@@ -711,11 +1068,11 @@ else bit_shift += bits_per_pixel; bits_used += bits_per_pixel; @@ -18057,22 +26960,22 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c break it out into individual r,g,b components */ rval = (pixvalue & rmask) >> rshift; gval = (pixvalue & gmask) >> gshift; -@@ -741,212 +1055,169 @@ +@@ -741,212 +1098,165 @@ /* use pixel value as an index into colors array */ if (pixvalue >= ncolors) { - FatalError("convertImage(): pixvalue >= ncolors"); -- } -- ++ fprintf(stderr, "WARNING: convertImage(): pixvalue >= ncolors\n"); ++ return 1; + } + - if (gbits == 24) { /* too many colors for 8-bit colormap */ - *pptr++ = (colors[pixvalue].red) >> 8; - *pptr++ = (colors[pixvalue].green) >> 8; - *pptr++ = (colors[pixvalue].blue) >> 8; -+ fprintf(stderr, "WARNING: convertImage(): pixvalue >= ncolors\n"); -+ return 1; - } +- } - else *pptr++ = pixvalue & 0xff; - +- + *pptr++ = (colors[pixvalue].red) >> 8; + *pptr++ = (colors[pixvalue].green) >> 8; + *pptr++ = (colors[pixvalue].blue) >> 8; @@ -18095,32 +26998,30 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c { - /* returns position of lowest set bit in 'ul' as an integer (0-31), - or -1 if none */ -- ++ /* returns 0 if rectangles A and B do not intersect ++ returns 1 if A partially intersects B ++ returns 2 if rectangle A is fully enclosed by B */ + - int i; - for (i=0; ((ul&1) == 0) && i<32; i++, ul>>=1); - if (i==32) i = -1; - return i; -} -+ /* returns 0 if rectangles A and B do not intersect -+ returns 1 if A partially intersects B -+ returns 2 if rectangle A is fully enclosed by B */ - + int ax1,ay1, bx1,by1; + ax1 = ax+aw-1; ay1 = ay+ah-1; + bx1 = bx+bw-1; by1 = by+bh-1; ++ if (ax1<bx || ax>bx1 || ay1<by || ay>by1) return 0; + -/**************************************/ -/* following code snarfed from 'xwd.c' */ -/**************************************/ -+ if (ax1<bx || ax>bx1 || ay1<by || ay>by1) return 0; - --#define lowbit(x) ((x) & (~(x) + 1)) + if (ax>=bx && ax1<=bx1 && ay>=by && ay1<=by) return 2; -+ return 1; -+} - +-#define lowbit(x) ((x) & (~(x) + 1)) +- +- -static int getxcolors(win_info, colors) - XWindowAttributes *win_info; - XColor **colors; @@ -18129,7 +27030,9 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c - Colormap cmap; - - *colors = (XColor *) NULL; -- ++ return 1; ++} + - if (win_info->visual->class == TrueColor) { - if (DEBUG) fprintf(stderr,"TrueColor visual: no colormap needed\n"); - return 0; @@ -18215,10 +27118,10 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c + return nc; } - +- - -- -/***********************************/ -int LoadGrab(pinfo) - PICINFO *pinfo; @@ -18284,14 +27187,16 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c - pinfo->normh = pinfo->h = gHIGH; - pinfo->frmType = -1; - pinfo->colType = -1; -- + - sprintf(pinfo->fullInfo,"<%s internal>", - (pinfo->type == PIC8) ? "8-bit" : "24-bit"); - - sprintf(pinfo->shrtInfo,"%dx%d image.",gWIDE, gHIGH); - - pinfo->comment = (char *) NULL; -- ++ /* run through the data a second time, this time mapping pixel values in ++ pic24 into colormap offsets into 'colors' */ + - grabPic = (byte *) NULL; - - return 1; @@ -18305,11 +27210,9 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c -#include <X11/Xatom.h> - -static Window TryChildren PARM((Display *, Window, Atom)); - +- -/* Find a window with WM_STATE, else return '0' */ -+ /* run through the data a second time, this time mapping pixel values in -+ pic24 into colormap offsets into 'colors' */ - +- -static Window xvClientWindow (dpy, win) - Display *dpy; - Window win; @@ -18323,42 +27226,16 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c - - WM_STATE = XInternAtom(dpy, "WM_STATE", True); - if (!WM_STATE) return win; -+ for (i=w*h,p=pic24, pix=pic8; i; i--,pix++) { -+ col = (((u_long) *p++) << 16); -+ col += (((u_long) *p++) << 8); -+ col += *p++; -+ -+ /* binary search the 'colors' array. It *IS* in there */ -+ low = 0; high = nc-1; -+ while (low <= high) { -+ mid = (low+high)/2; -+ if (col < colors[mid]) high = mid - 1; -+ else if (col > colors[mid]) low = mid + 1; -+ else break; -+ } - +- - XGetWindowProperty(dpy, win, WM_STATE, 0L, 0L, False, AnyPropertyType, - &type, &format, &nitems, &after, &data); - if (type) return win; -+ if (high < low) { -+ fprintf(stderr,"Trivial24to8: impossible situation!\n"); -+ exit(1); -+ } -+ *pix = mid; -+ } - +- - inf = TryChildren(dpy, win, WM_STATE); -+ /* and load up the 'desired colormap' */ -+ for (i=0; i<nc; i++) { -+ rmap[i] = colors[i]>>16; -+ gmap[i] = (colors[i]>>8) & 0xff; -+ bmap[i] = colors[i] & 0xff; -+ } - +- - return inf; -+ return 1; - } - +-} +- -static Window TryChildren (dpy, win, WM_STATE) - Display *dpy; - Window win; @@ -18376,6 +27253,19 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c - - if (!XQueryTree(dpy, win, &root, &parent, &children, &nchildren)) - return 0; ++ for (i=w*h,p=pic24, pix=pic8; i; i--,pix++) { ++ col = (((u_long) *p++) << 16); ++ col += (((u_long) *p++) << 8); ++ col += *p++; ++ ++ /* binary search the 'colors' array. It *IS* in there */ ++ low = 0; high = nc-1; ++ while (low <= high) { ++ mid = (low+high)/2; ++ if (col < colors[mid]) high = mid - 1; ++ else if (col > colors[mid]) low = mid + 1; ++ else break; ++ } - for (i = 0; !inf && (i < nchildren); i++) { - XGetWindowProperty(dpy, children[i], WM_STATE, 0L, 0L, False, @@ -18383,23 +27273,44 @@ diff -ruN xv-3.10a/xvgrab.c xv-3.10a-bugfixes/xvgrab.c - &after, &data); - if (type) - inf = children[i]; -- } ++ if (high < low) { ++ fprintf(stderr,"Trivial24to8: impossible situation!\n"); ++ exit(1); + } ++ *pix = mid; ++ } - for (i = 0; !inf && (i < nchildren); i++) - inf = TryChildren(dpy, children[i], WM_STATE); ++ /* and load up the 'desired colormap' */ ++ for (i=0; i<nc; i++) { ++ rmap[i] = colors[i]>>16; ++ gmap[i] = (colors[i]>>8) & 0xff; ++ bmap[i] = colors[i] & 0xff; ++ } - if (children) XFree((char *)children); - return inf; --} -diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c ++ return 1; + } +diff -ru xv-3.10a/xvgraf.c xv-3.10a-enhancements/xvgraf.c --- xv-3.10a/xvgraf.c 1994-12-22 14:34:42.000000000 -0800 -+++ xv-3.10a-bugfixes/xvgraf.c 2004-05-16 18:03:34.000000000 -0700 ++++ xv-3.10a-enhancements/xvgraf.c 2007-05-12 14:03:08.000000000 -0700 @@ -1,4 +1,4 @@ -/* +/* * xvgraf.c - GRAF window handling functions * * callable functions: +@@ -52,7 +52,7 @@ + Window parent; + int x,y; + unsigned long fg,bg; +- char *title; ++ const char *title; + { + /* NOTE: CreateGraf does not initialize hands[], nhands, or spline, + as these could be initialized by X resources (or whatever), @@ -88,7 +88,7 @@ gp->win = XCreateSimpleWindow(theDisp, parent, x,y, GWIDE, GHIGH, 1, fg,bg); if (!gp->win) FatalError("can't create graph (main) window"); @@ -18436,7 +27347,7 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c XSetForeground(theDisp, theGC, gp->fg); XSetBackground(theDisp, theGC, gp->bg); DrawString(gp->win, 2, 1+ASCENT, gp->str); -@@ -165,7 +165,7 @@ +@@ -165,11 +165,11 @@ { int i,x,y; XPoint pts[129], *pt; @@ -18444,7 +27355,13 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c + if (gp->entergamma) { - char *str1 = "Enter gamma"; +- char *str1 = "Enter gamma"; +- char *str2 = "value: "; ++ const char *str1 = "Enter gamma"; ++ const char *str2 = "value: "; + + XSetForeground(theDisp, theGC, gp->fg); + XSetBackground(theDisp, theGC, gp->bg); @@ -181,15 +181,15 @@ x = 10 + StringWidth(str2) + 8; y = 30 + ASCENT + CHIGH + 3; @@ -18566,11 +27483,13 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c gp->hands[h].x/2, (255-gp->hands[h].y)/2); if (grab) XUngrabPointer(theDisp, (Time) CurrentTime); } -@@ -481,9 +481,9 @@ +@@ -480,24 +480,24 @@ + int hnum; { int w; - char *tstr = "888,888"; +- char *tstr = "888,888"; - ++ const char *tstr = "888,888"; + /* if hnum < 0, clears the text area */ - @@ -18578,13 +27497,17 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c XSetFont(theDisp, theGC, monofont); w = XTextWidth(monofinfo, tstr, (int) strlen(tstr)); -@@ -492,12 +492,12 @@ +- if (hnum >= 0) sprintf(str,"%3d,%3d",gp->hands[hnum].x,gp->hands[hnum].y); +- else sprintf(str," "); ++ if (hnum >= 0) sprintf(dummystr,"%3d,%3d",gp->hands[hnum].x,gp->hands[hnum].y); ++ else sprintf(dummystr," "); XSetForeground(theDisp, theGC, gp->fg); XSetBackground(theDisp, theGC, gp->bg); - XDrawImageString(theDisp, gp->win, theGC, 130-w, 1+ASCENT, +- str, (int) strlen(str)); + XDrawImageString(theDisp, gp->win, theGC, 130-w, 1+ASCENT, - str, (int) strlen(str)); ++ dummystr, (int) strlen(dummystr)); XSetFont(theDisp, theGC, mfont); } @@ -18672,17 +27595,41 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c for (i=0; i<256; i++) { yd = EvalSpline(x, y, yf, gp->nhands, (double) i); j = (int) floor(yd + 0.5); -@@ -750,7 +750,7 @@ +@@ -729,8 +729,8 @@ + + /*********************/ + int Str2Graf(gp, str) +-GRAF_STATE *gp; +-char *str; ++ GRAF_STATE *gp; ++ const char *str; + { + /* parses strings of the form: "S 3 : 0,0 : 63,63 : 255,255", + (meaning SPLINE, 3 points, and the 3 sets of handle coordinates) +@@ -744,14 +744,15 @@ + thing tends to break optimizers */ + + char tstr[256], tstr1[256], *sp, *dp; ++ const char *csp; + XPoint coords[MAX_GHANDS]; + int spline, nhands, i, x, y; + if (!str) return 1; /* NULL strings don't parse well! */ /* first, strip all pesky whitespace from str */ - for (sp=str, dp=tstr; *sp; sp++) -+ for (sp=str, dp=tstr; *sp; sp++) - if (*sp > ' ') { *dp = *sp; dp++; } +- if (*sp > ' ') { *dp = *sp; dp++; } ++ for (csp=str, dp=tstr; *csp; csp++) ++ if (*csp > ' ') { *dp = *csp; dp++; } *dp = '\0'; -@@ -764,7 +764,7 @@ - } + /* check for 'gamma'-style str */ +@@ -761,10 +762,10 @@ + gp->gammamode = 1; + sprintf(gp->gvstr, "%.5g", gp->gamma); + return 0; +- } ++ } else return 1; } - @@ -18690,7 +27637,7 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c /* read Spline, or Line (S/L) character */ sp = tstr; if (*sp == 'S' || *sp == 's') spline = 1; -@@ -784,7 +784,7 @@ +@@ -784,7 +785,7 @@ while (*sp && *sp != ':') {*dp = *sp; dp++; sp++; } *dp++ = '\0'; if (sscanf(tstr1,"%d,%d",&x, &y) != 2) return 1; @@ -18699,7 +27646,7 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c y < 0 || y > 255) return 1; /* out of range */ coords[i].x = x; coords[i].y = y; } -@@ -837,7 +837,7 @@ +@@ -837,7 +838,7 @@ IFSET(gp->gamma, gsp->gamma); IFSET(gp->nhands, gsp->nhands); @@ -18708,7 +27655,7 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c { strcpy(gp->gvstr, gsp->gvstr); rv++; } for (i=0; i<gp->nhands; i++) { -@@ -880,7 +880,7 @@ +@@ -880,7 +881,7 @@ sig = ((double) x[i]-x[i-1]) / ((double) x[i+1] - x[i-1]); p = sig * y2[i-1] + 2.0; y2[i] = (sig-1.0) / p; @@ -18717,7 +27664,7 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c (((double) y[i]-y[i-1]) / (x[i]-x[i-1])); u[i] = (6.0 * u[i]/(x[i+1]-x[i-1]) - sig*u[i-1]) / p; } -@@ -912,9 +912,9 @@ +@@ -912,9 +913,9 @@ if (h==0.0) FatalError("bad xvalues in splint\n"); a = (xa[khi]-x)/h; b = (x-xa[klo])/h; @@ -18729,18 +27676,27 @@ diff -ruN xv-3.10a/xvgraf.c xv-3.10a-bugfixes/xvgraf.c + -diff -ruN xv-3.10a/xviff.c xv-3.10a-bugfixes/xviff.c +diff -ru xv-3.10a/xviff.c xv-3.10a-enhancements/xviff.c --- xv-3.10a/xviff.c 1995-01-13 11:54:54.000000000 -0800 -+++ xv-3.10a-bugfixes/xviff.c 2005-04-03 11:57:56.000000000 -0700 -@@ -39,7 +39,7 @@ ++++ xv-3.10a-enhancements/xviff.c 2007-05-13 17:50:59.000000000 -0700 +@@ -39,14 +39,14 @@ static long filesize; -static int readID PARM((FILE *, char *)); +-static int iffError PARM((char *, char *)); +/* static int readID PARM((FILE *, char *)); DOES NOT EXIST */ - static int iffError PARM((char *, char *)); ++static int iffError PARM((const char *, const char *)); static void decomprle PARM((byte *, byte *, long, long)); static unsigned int iff_getword PARM((byte *)); + static unsigned long iff_getlong PARM((byte *)); + + +-static char *bname; ++static const char *bname; + + + /* Define internal ILBM types */ @@ -65,16 +65,16 @@ /*******************************************/ { @@ -19013,19 +27969,317 @@ diff -ruN xv-3.10a/xviff.c xv-3.10a-bugfixes/xviff.c if (codeByte < 0x80) { codeByte++; if ((slen > (long) codeByte) && (dlen >= (long) codeByte)) { -diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c +@@ -522,7 +545,7 @@ + + /*******************************************/ + static int iffError(fname, st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; +diff -ru xv-3.10a/xvimage.c xv-3.10a-enhancements/xvimage.c --- xv-3.10a/xvimage.c 1995-01-13 16:11:36.000000000 -0800 -+++ xv-3.10a-bugfixes/xvimage.c 2005-03-31 07:23:39.000000000 -0800 -@@ -34,7 +34,7 @@ ++++ xv-3.10a-enhancements/xvimage.c 2007-03-18 18:13:51.000000000 -0700 +@@ -21,6 +21,16 @@ + * int LoadPad(pinfo, fname); + */ + ++/* The following switch should better be provided at runtime for ++ * comparison purposes. ++ * At the moment it's only compile time, unfortunately. ++ * Who can make adaptions for use as a runtime switch by a menu option? ++ * [GRR 19980607: now via do_fixpix_smooth global; macro renamed to ENABLE_] ++ * [see http://sylvana.net/fixpix/ for home page, further info] ++ */ ++/* #define ENABLE_FIXPIX_SMOOTH */ /* GRR 19980607: moved into xv.h */ ++ ++#define NEEDSDIR /* for S_IRUSR|S_IWUSR */ + #include "copyright.h" + + #include "xv.h" +@@ -34,9 +44,11 @@ static void do_pan_calc PARM((int, int, int *, int *)); static void crop1 PARM((int, int, int, int, int)); static int doAutoCrop24 PARM((void)); -static void floydDitherize1 PARM((XImage *, byte *, int, int, int, +static void floydDitherize1 PARM((XImage *, byte *, int, int, int, byte *, byte *,byte *)); ++#if 0 /* NOTUSED */ static int highbit PARM((unsigned long)); ++#endif -@@ -74,7 +74,7 @@ + static int doPadSolid PARM((char *, int, int, int, int)); + static int doPadBggen PARM((char *, int, int, int, int)); +@@ -46,6 +58,267 @@ + static int ReadImageFile1 PARM((char *, PICINFO *)); + + ++/* The following array represents the pixel values for each shade ++ * of the primary color components. ++ * If 'p' is a pointer to a source image rgb-byte-triplet, we can ++ * construct the output pixel value simply by 'oring' together ++ * the corresponding components: ++ * ++ * unsigned char *p; ++ * unsigned long pixval; ++ * ++ * pixval = screen_rgb[0][*p++]; ++ * pixval |= screen_rgb[1][*p++]; ++ * pixval |= screen_rgb[2][*p++]; ++ * ++ * This is both efficient and generic, since the only assumption ++ * is that the primary color components have separate bits. ++ * The order and distribution of bits does not matter, and we ++ * don't need additional variables and shifting/masking code. ++ * The array size is 3 KBytes total and thus very reasonable. ++ */ ++ ++static unsigned long screen_rgb[3][256]; ++ ++/* The following array holds the exact color representations ++ * reported by the system. ++ * This is useful for less than 24 bit deep displays as a base ++ * for additional dithering to get smoother output. ++ */ ++ ++static byte screen_set[3][256]; ++ ++/* The following routine initializes the screen_rgb and screen_set ++ * arrays. ++ * Since it is executed only once per program run, it does not need ++ * to be super-efficient. ++ * ++ * The method is to draw points in a pixmap with the specified shades ++ * of primary colors and then get the corresponding XImage pixel ++ * representation. ++ * Thus we can get away with any Bit-order/Byte-order dependencies. ++ * ++ * The routine uses some global X variables: theDisp, theScreen, ++ * and dispDEEP. Adapt these to your application as necessary. ++ * I've not passed them in as parameters, since for other platforms ++ * than X these may be different (see vfixpix.c), and so the ++ * screen_init() interface is unique. ++ * ++ * BUG: I've read in the "Xlib Programming Manual" from O'Reilly & ++ * Associates, that the DefaultColormap in TrueColor might not ++ * provide the full shade representation in XAllocColor. ++ * In this case one had to provide a 'best' colormap instead. ++ * However, my tests with Xaccel on a Linux-Box with a Mach64 ++ * card were fully successful, so I leave that potential problem ++ * to you at the moment and would appreciate any suggestions... ++ */ ++ ++static void screen_init() ++{ ++ static int init_flag; /* assume auto-init as 0 */ ++ Pixmap check_map; ++ GC check_gc; ++ XColor check_col; ++ XImage *check_image; ++ int ci, i; ++ ++ if (init_flag) return; ++ init_flag = 1; ++ ++ check_map = XCreatePixmap(theDisp, RootWindow(theDisp,theScreen), ++ 1, 1, dispDEEP); ++ check_gc = XCreateGC(theDisp, check_map, 0, NULL); ++ for (ci = 0; ci < 3; ci++) { ++ for (i = 0; i < 256; i++) { ++ check_col.red = 0; ++ check_col.green = 0; ++ check_col.blue = 0; ++ /* Do proper upscaling from unsigned 8 bit (image data values) ++ to unsigned 16 bit (X color representation). */ ++ ((unsigned short *)&check_col.red)[ci] = (unsigned short)((i << 8) | i); ++ if (theVisual->class == TrueColor) ++ XAllocColor(theDisp, theCmap, &check_col); ++ else ++ xvAllocColor(theDisp, theCmap, &check_col); ++ screen_set[ci][i] = ++ (((unsigned short *)&check_col.red)[ci] >> 8) & 0xff; ++ XSetForeground(theDisp, check_gc, check_col.pixel); ++ XDrawPoint(theDisp, check_map, check_gc, 0, 0); ++ check_image = XGetImage(theDisp, check_map, 0, 0, 1, 1, ++ AllPlanes, ZPixmap); ++ if (check_image) { ++ switch (check_image->bits_per_pixel) { ++ case 8: ++ screen_rgb[ci][i] = *(CARD8 *)check_image->data; ++ break; ++ case 16: ++ screen_rgb[ci][i] = *(CARD16 *)check_image->data; ++ break; ++ case 24: ++ screen_rgb[ci][i] = ++ ((unsigned long)*(CARD8 *)check_image->data << 16) | ++ ((unsigned long)*(CARD8 *)(check_image->data + 1) << 8) | ++ (unsigned long)*(CARD8 *)(check_image->data + 2); ++ break; ++ case 32: ++ screen_rgb[ci][i] = *(CARD32 *)check_image->data; ++ break; ++ } ++ XDestroyImage(check_image); ++ } ++ } ++ } ++ XFreeGC(theDisp, check_gc); ++ XFreePixmap(theDisp, check_map); ++} ++ ++ ++#ifdef ENABLE_FIXPIX_SMOOTH ++ ++/* The following code is based in part on: ++ * ++ * jquant1.c ++ * ++ * Copyright (C) 1991-1996, Thomas G. Lane. ++ * This file is part of the Independent JPEG Group's software. ++ * For conditions of distribution and use, see the accompanying README file. ++ * ++ * This file contains 1-pass color quantization (color mapping) routines. ++ * These routines provide mapping to a fixed color map using equally spaced ++ * color values. Optional Floyd-Steinberg or ordered dithering is available. ++ */ ++ ++/* Declarations for Floyd-Steinberg dithering. ++ * ++ * Errors are accumulated into the array fserrors[], at a resolution of ++ * 1/16th of a pixel count. The error at a given pixel is propagated ++ * to its not-yet-processed neighbors using the standard F-S fractions, ++ * ... (here) 7/16 ++ * 3/16 5/16 1/16 ++ * We work left-to-right on even rows, right-to-left on odd rows. ++ * ++ * We can get away with a single array (holding one row's worth of errors) ++ * by using it to store the current row's errors at pixel columns not yet ++ * processed, but the next row's errors at columns already processed. We ++ * need only a few extra variables to hold the errors immediately around the ++ * current column. (If we are lucky, those variables are in registers, but ++ * even if not, they're probably cheaper to access than array elements are.) ++ * ++ * We provide (#columns + 2) entries per component; the extra entry at each ++ * end saves us from special-casing the first and last pixels. ++ */ ++ ++typedef INT16 FSERROR; /* 16 bits should be enough */ ++typedef int LOCFSERROR; /* use 'int' for calculation temps */ ++ ++typedef struct { byte *colorset; ++ FSERROR *fserrors; ++ } FSBUF; ++ ++/* Floyd-Steinberg initialization function. ++ * ++ * It is called 'fs2_init' since it's specialized for our purpose and ++ * could be embedded in a more general FS-package. ++ * ++ * Returns a malloced FSBUF pointer which has to be passed as first ++ * parameter to subsequent 'fs2_dither' calls. ++ * The FSBUF structure does not need to be referenced by the calling ++ * application, it can be treated from the app like a void pointer. ++ * ++ * The current implementation does only require to free() this returned ++ * pointer after processing. ++ * ++ * Returns NULL if malloc fails. ++ * ++ * NOTE: The FSBUF structure is designed to allow the 'fs2_dither' ++ * function to work with an *arbitrary* number of color components ++ * at runtime! This is an enhancement over the IJG code base :-). ++ * Only fs2_init() specifies the (maximum) number of components. ++ */ ++ ++static FSBUF *fs2_init(width) ++int width; ++{ ++ FSBUF *fs; ++ FSERROR *p; ++ ++ fs = (FSBUF *) ++ malloc(sizeof(FSBUF) * 3 + ((size_t)width + 2) * sizeof(FSERROR) * 3); ++ if (fs == 0) return fs; ++ ++ fs[0].colorset = screen_set[0]; ++ fs[1].colorset = screen_set[1]; ++ fs[2].colorset = screen_set[2]; ++ ++ p = (FSERROR *)(fs + 3); ++ memset(p, 0, ((size_t)width + 2) * sizeof(FSERROR) * 3); ++ ++ fs[0].fserrors = p; ++ fs[1].fserrors = p + 1; ++ fs[2].fserrors = p + 2; ++ ++ return fs; ++} ++ ++/* Floyd-Steinberg dithering function. ++ * ++ * NOTE: ++ * (1) The image data referenced by 'ptr' is *overwritten* (input *and* ++ * output) to allow more efficient implementation. ++ * (2) Alternate FS dithering is provided by the sign of 'nc'. Pass in ++ * a negative value for right-to-left processing. The return value ++ * provides the right-signed value for subsequent calls! ++ * (3) This particular implementation assumes *no* padding between lines! ++ * Adapt this if necessary. ++ */ ++ ++static int fs2_dither(fs, ptr, nc, num_rows, num_cols) ++FSBUF *fs; ++byte *ptr; ++int nc, num_rows, num_cols; ++{ ++ int abs_nc, ci, row, col; ++ LOCFSERROR delta, cur, belowerr, bpreverr; ++ byte *dataptr, *colsetptr; ++ FSERROR *errorptr; ++ ++ if ((abs_nc = nc) < 0) abs_nc = -abs_nc; ++ for (row = 0; row < num_rows; row++) { ++ for (ci = 0; ci < abs_nc; ci++, ptr++) { ++ dataptr = ptr; ++ colsetptr = fs[ci].colorset; ++ errorptr = fs[ci].fserrors; ++ if (nc < 0) { ++ dataptr += (num_cols - 1) * abs_nc; ++ errorptr += (num_cols + 1) * abs_nc; ++ } ++ cur = belowerr = bpreverr = 0; ++ for (col = 0; col < num_cols; col++) { ++ cur += errorptr[nc]; ++ cur += 8; cur >>= 4; ++ if ((cur += *dataptr) < 0) cur = 0; ++ else if (cur > 255) cur = 255; ++ *dataptr = cur & 0xff; ++ cur -= colsetptr[cur]; ++ delta = cur << 1; cur += delta; ++ bpreverr += cur; cur += delta; ++ belowerr += cur; cur += delta; ++ errorptr[0] = (FSERROR)bpreverr; ++ bpreverr = belowerr; ++ belowerr = delta >> 1; ++ dataptr += nc; ++ errorptr += nc; ++ } ++ errorptr[0] = (FSERROR)bpreverr; ++ } ++ ptr += (num_cols - 1) * abs_nc; ++ nc = -nc; ++ } ++ return nc; ++} ++ ++#endif /* ENABLE_FIXPIX_SMOOTH */ ++ + + #define DO_CROP 0 + #define DO_ZOOM 1 +@@ -74,7 +347,7 @@ GenerateEpic(w,h); CreateXImage(); } @@ -19034,7 +28288,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /********************************************/ -@@ -90,15 +90,15 @@ +@@ -90,15 +363,15 @@ cp = cpic; bperpix = (picType == PIC8) ? 1 : 3; @@ -19053,7 +28307,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /***********************************/ -@@ -112,10 +112,10 @@ +@@ -112,10 +385,10 @@ clptr = NULL; cxarrp = NULL; cy = 0; /* shut up compiler */ SetISTR(ISTR_EXPAND, "%.5g%% x %.5g%% (%d x %d)", @@ -19066,7 +28320,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c fprintf(stderr,"GenerateEpic(%d,%d) eSIZE=%d,%d cSIZE=%d,%d epicode=%d\n", w,h,eWIDE,eHIGH,cWIDE,cHIGH, epicMode); -@@ -124,7 +124,7 @@ +@@ -124,7 +397,7 @@ eWIDE = w; eHIGH = h; @@ -19075,7 +28329,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (picType == PIC8) { epic = SmoothResize(cpic, cWIDE, cHIGH, eWIDE, eHIGH, rMap,gMap,bMap, rdisp,gdisp,bdisp, numcols); -@@ -143,7 +143,7 @@ +@@ -143,7 +416,7 @@ /* generate a 'raw' epic, as we'll need it for ColorDither if EM_DITH */ @@ -19084,7 +28338,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (eWIDE==cWIDE && eHIGH==cHIGH) { /* 1:1 expansion. point epic at cpic */ epic = cpic; } -@@ -163,13 +163,13 @@ +@@ -163,13 +436,13 @@ /* the scaling routine. not really all that scary after all... */ /* OPTIMIZATON: Malloc an eWIDE array of ints which will hold the @@ -19100,7 +28354,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c cxarr[ex] = bperpix * ((cWIDE * ex) / eWIDE); elptr = epptr = epic; -@@ -182,7 +182,7 @@ +@@ -182,7 +455,7 @@ clptr = cpic + (cy * cWIDE * bperpix); if (bperpix == 1) { @@ -19109,7 +28363,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c *epptr = clptr[*cxarrp++]; } else { -@@ -190,7 +190,7 @@ +@@ -190,7 +463,7 @@ for (ex=0, cxarrp = cxarr; ex<eWIDE; ex++,cxarrp++) { cp = clptr + *cxarrp; @@ -19118,7 +28372,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c *epptr++ = *cp++; } } -@@ -203,7 +203,7 @@ +@@ -203,7 +476,7 @@ if (picType == PIC8 && epicMode == EM_DITH) { byte *tmp; @@ -19127,7 +28381,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c rdisp,gdisp,bdisp, numcols); if (tmp) { /* success */ FreeEpic(); -@@ -214,7 +214,7 @@ +@@ -214,7 +487,7 @@ } } } @@ -19136,7 +28390,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /***********************************/ -@@ -233,7 +233,7 @@ +@@ -233,7 +506,7 @@ static void do_zoom(mx,my) int mx,my; { @@ -19145,7 +28399,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c int rx,ry,rx2,ry2, orx, ory, orw, orh; int px,py,pw,ph,opx,opy,opw,oph,m; Window rW, cW; unsigned int mask; int rtx, rty; -@@ -254,10 +254,10 @@ +@@ -254,10 +527,10 @@ while (1) { if (!XQueryPointer(theDisp,mainW,&rW,&cW,&rtx,&rty, &mx,&my,&mask)) continue; @@ -19158,7 +28412,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c compute_zoom_rect(mx, my, &px, &py, &pw, &ph); if (px!=opx || py!=opy) { XDrawRectangle(theDisp,mainW,theGC, orx,ory, (u_int)orw, (u_int)orh); -@@ -283,7 +283,7 @@ +@@ -283,7 +556,7 @@ XSetPlaneMask(theDisp, theGC, AllPlanes); return; } @@ -19167,7 +28421,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c for (i=0; i<4; i++) { XDrawRectangle(theDisp, mainW, theGC, orx, ory, (u_int) orw, (u_int) orh); -@@ -297,7 +297,7 @@ +@@ -297,7 +570,7 @@ /* if rectangle is *completely* outside epic, don't zoom */ if (orx+orw<0 || ory+orh<0 || orx>=eWIDE || ory>=eHIGH) return; @@ -19176,7 +28430,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c crop1(opx, opy, opw, oph, DO_ZOOM); } -@@ -306,15 +306,15 @@ +@@ -306,15 +579,15 @@ static void compute_zoom_rect(x, y, px, py, pw, ph) int x, y, *px, *py, *pw, *ph; { @@ -19196,7 +28450,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c *py = *py - (*ph)/2; RANGE(*px, 0, pWIDE - *pw); -@@ -327,7 +327,7 @@ +@@ -327,7 +600,7 @@ { int x,y,w,h, x2,y2, ex,ey,ew,eh; @@ -19205,7 +28459,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c the size of eWIDE,eHIGH, centered around eWIDE/2, eHIGH/2, but no larger than pWIDE,PHIGH */ -@@ -362,7 +362,7 @@ +@@ -362,7 +635,7 @@ int i, ox,oy,offx,offy, rw,rh, px, py, dx, dy,m; Window rW, cW; unsigned int mask; int rx, ry; @@ -19214,7 +28468,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c offy = oy = my; rw = eWIDE-1; rh = eHIGH-1; m = 0; -@@ -374,50 +374,50 @@ +@@ -374,50 +647,50 @@ /* track until Button2 is released */ while (1) { @@ -19277,7 +28531,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c (u_int) rw, (u_int) rh); XFlush(theDisp); Timer(100); -@@ -430,7 +430,7 @@ +@@ -430,7 +703,7 @@ dx = px - cXOFF; dy = py - cYOFF; if (dx==0 && dy==0) { /* didn't pan anywhere */ @@ -19286,7 +28540,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c (u_int) rw, (u_int) rh); XSetFunction(theDisp, theGC, GXcopy); XSetPlaneMask(theDisp, theGC, AllPlanes); -@@ -485,7 +485,7 @@ +@@ -485,7 +758,7 @@ /***********************************/ void Crop() { @@ -19295,7 +28549,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (!HaveSelection()) return; -@@ -499,8 +499,7 @@ +@@ -499,8 +772,7 @@ static void crop1(x,y,w,h,zm) int x,y,w,h,zm; { @@ -19305,7 +28559,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c oldcx = cXOFF; oldcy = cYOFF; oldew = eWIDE; oldeh = eHIGH; -@@ -529,7 +528,7 @@ +@@ -529,7 +801,7 @@ if (cpic == pic) return; /* not cropped */ BTSetActive(&but[BUNCROP],0); @@ -19314,7 +28568,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (epicMode == EM_SMOOTH) { /* turn off smoothing */ epicMode = EM_RAW; SetEpicMode(); } -@@ -538,7 +537,7 @@ +@@ -538,7 +810,7 @@ FreeEpic(); if (cpic && cpic != pic) free(cpic); cpic = NULL; @@ -19323,7 +28577,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c w = (pWIDE * eWIDE) / cWIDE; h = (pHIGH * eHIGH) / cHIGH; if (w>maxWIDE || h>maxHIGH) { -@@ -566,7 +565,7 @@ +@@ -566,7 +838,7 @@ WUnCrop(); SetCropString(); } @@ -19332,7 +28586,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /***********************************/ void AutoCrop() -@@ -583,7 +582,7 @@ +@@ -583,7 +855,7 @@ WCrop(eWIDE, eHIGH, cXOFF-oldcx, cYOFF-oldcy); } } @@ -19341,7 +28595,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c SetCursors(-1); } -@@ -650,7 +649,7 @@ +@@ -650,7 +922,7 @@ /* do the actual cropping */ if (cleft || ctop || cbot || cright) { @@ -19350,7 +28604,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c cWIDE-(cleft+cright), cHIGH-(ctop+cbot)); return 1; } -@@ -673,7 +672,7 @@ +@@ -673,7 +945,7 @@ # define NEIGHBOR 16 /* within 6% of neighboring pixels */ # define MISSPCT 6 /* and up to 6% that don't match */ # define inabsrange(a,n) ( (a) < n && (a) > -n ) @@ -19359,7 +28613,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (cHIGH<3 || cWIDE<3) return 0; -@@ -739,7 +738,7 @@ +@@ -739,7 +1011,7 @@ while (cleft + 1 < cWIDE) { /* see if we can delete this line */ oldr = bgR; oldg = bgG; oldb = bgB; @@ -19368,7 +28622,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c i++, cp1 += (cWIDE * 3)) { r=cp1[0]-bgR; g=cp1[1]-bgG; b=cp1[2]-bgB; R=cp1[0]-oldr; G=cp1[1]-oldg; B=cp1[2]-oldb; -@@ -763,7 +762,7 @@ +@@ -763,7 +1035,7 @@ while (cleft + cright + 1 < cWIDE) { /* see if we can delete this line */ oldr = bgR; oldg = bgG; oldb = bgB; @@ -19377,7 +28631,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c i++, cp1 += (cWIDE*3)) { r=cp1[0]-bgR; g=cp1[1]-bgG; b=cp1[2]-bgB; R=cp1[0]-oldr; G=cp1[1]-oldg; B=cp1[2]-oldb; -@@ -784,8 +783,8 @@ +@@ -784,8 +1056,8 @@ if (cleft || ctop || cbot || cright) { if (cWIDE - (cleft + cright) < 1 || cHIGH - (ctop + cbot ) < 1) return 0; /* sanity check */ @@ -19388,7 +28642,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c cWIDE-(cleft+cright), cHIGH-(ctop+cbot)); return 1; } -@@ -802,7 +801,7 @@ +@@ -802,7 +1074,7 @@ and sticks likely values into eWIDE,eHIGH, assuming you wanted to crop. epic is not regnerated (but is freed) */ @@ -19397,7 +28651,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c byte *cp, *pp; double expw, exph; -@@ -837,7 +836,7 @@ +@@ -837,7 +1109,7 @@ else { /* at this point, we want to generate cpic, which will contain a cWIDE*cHIGH subsection of 'pic', top-left at cXOFF,cYOFF */ @@ -19406,7 +28660,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c cpic = (byte *) malloc((size_t) (cWIDE * cHIGH * bperpix)); if (cpic == NULL) { -@@ -852,7 +851,7 @@ +@@ -852,7 +1124,7 @@ cp = cpic; for (i=0; i<cHIGH; i++) { pp = pic + (i+cYOFF) * (pWIDE*bperpix) + (cXOFF * bperpix); @@ -19415,7 +28669,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c *cp++ = *pp++; } } -@@ -861,7 +860,7 @@ +@@ -861,7 +1133,7 @@ SetCropString(); BTSetActive(&but[BUNCROP], (cpic!=pic)); @@ -19424,7 +28678,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c eHIGH = (int) (cHIGH * exph); if (eWIDE>maxWIDE || eHIGH>maxHIGH) { /* make 'normal' size */ -@@ -869,7 +868,7 @@ +@@ -869,7 +1141,7 @@ double r,wr,hr; wr = ((double) cWIDE) / maxWIDE; hr = ((double) cHIGH) / maxHIGH; @@ -19433,7 +28687,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c r = (wr>hr) ? wr : hr; /* r is the max(wr,hr) */ eWIDE = (int) ((cWIDE / r) + 0.5); eHIGH = (int) ((cHIGH / r) + 0.5); -@@ -906,12 +905,12 @@ +@@ -906,12 +1178,12 @@ int dir; { int i; @@ -19449,7 +28703,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* rotate clipped version and modify 'clip' coords */ if (cpic != pic && cpic != NULL) { if (!dir) { -@@ -928,7 +927,7 @@ +@@ -928,7 +1200,7 @@ RotatePic(cpic, picType, &cWIDE, &cHIGH,dir); } else { cWIDE = pWIDE; cHIGH = pHIGH; } @@ -19458,7 +28712,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* rotate expanded version */ if (epic != cpic && epic != NULL) { WaitCursor(); -@@ -940,7 +939,7 @@ +@@ -940,7 +1212,7 @@ SetISTR(ISTR_RES,"%d x %d",pWIDE,pHIGH); SetISTR(ISTR_EXPAND, "%.5g%% x %.5g%% (%d x %d)", @@ -19467,7 +28721,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c 100.0 * ((float) eHIGH) / cHIGH, eWIDE, eHIGH); } -@@ -951,7 +950,7 @@ +@@ -951,7 +1223,7 @@ int *wp, *hp; int ptype, dir; { @@ -19476,7 +28730,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c or counter-clockwise (dir != 0). swaps w and h */ byte *pic1, *pix1, *pix; -@@ -960,7 +959,7 @@ +@@ -960,7 +1232,7 @@ bperpix = (ptype == PIC8) ? 1 : 3; @@ -19485,7 +28739,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c pix1 = pic1 = (byte *) malloc((size_t) (w*h*bperpix)); if (!pic1) FatalError("Not enough memory to rotate!"); -@@ -968,15 +967,15 @@ +@@ -968,15 +1240,15 @@ if (dir==0) { for (i=0; i<w; i++) { /* CW */ if (bperpix == 1) { @@ -19505,7 +28759,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c for (k=0; k<bperpix; k++) *pix1++ = pix[k]; } } -@@ -984,25 +983,25 @@ +@@ -984,25 +1256,25 @@ else { for (i=w-1; i>=0; i--) { /* CCW */ if (bperpix == 1) { @@ -19538,7 +28792,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* swap w and h */ *wp = h; *hp = w; } -@@ -1017,7 +1016,7 @@ +@@ -1017,7 +1289,7 @@ * * Note: flips pic, cpic, and epic. Doesn't touch Ximage, nor does it draw */ @@ -19547,7 +28801,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c WaitCursor(); if (HaveSelection()) { /* only flip selection region */ -@@ -1026,7 +1025,7 @@ +@@ -1026,7 +1298,7 @@ } FlipPic(pic, pWIDE, pHIGH, dir); @@ -19556,7 +28810,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* flip clipped version */ if (cpic && cpic != pic) { WaitCursor(); -@@ -1048,21 +1047,21 @@ +@@ -1048,21 +1320,21 @@ int dir; { /* flips a w*h array of bytes horizontally (dir=0) or vertically (dir!=0) */ @@ -19583,7 +28837,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c for (j=0; j<w/2; j++, rightp -= (2*bperpix)) { for (l=0; l<bperpix; l++, leftp++, rightp++) { k = *leftp; *leftp = *rightp; *rightp = k; -@@ -1070,14 +1069,14 @@ +@@ -1070,14 +1342,14 @@ } } } @@ -19601,7 +28855,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c for (j=0; j<h/2; j++, topp+=(w-1)*bperpix, botp-=(w+1)*bperpix) { for (l=0; l<bperpix; l++, topp++, botp++) { k = *topp; *topp = *botp; *botp = k; -@@ -1093,26 +1092,26 @@ +@@ -1093,26 +1365,26 @@ int dir; { /* flips selected area in 'pic', regens cpic and epic appropriately */ @@ -19634,7 +28888,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c for (j=0; j<w/2; j++, rightp -= (2*bperpix)) { for (l=0; l<bperpix; l++, leftp++, rightp++) { k = *leftp; *leftp = *rightp; *rightp = k; -@@ -1120,14 +1119,14 @@ +@@ -1120,14 +1392,14 @@ } } } @@ -19652,7 +28906,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c for (j=0; j<h/2; j++, topp+=(pWIDE-1)*bperpix, botp-=(pWIDE+1)*bperpix) { for (l=0; l<bperpix; l++, topp++, botp++) { k = *topp; *topp = *botp; *botp = k; -@@ -1139,22 +1138,22 @@ +@@ -1139,22 +1411,22 @@ GenerateCpic(); GenerateEpic(eWIDE,eHIGH); } @@ -19679,7 +28933,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* generate cpic,epic,theImage from new 'pic' */ crop1(cXOFF, cYOFF, cWIDE, cHIGH, DO_ZOOM); HandleDispMode(); -@@ -1166,15 +1165,15 @@ +@@ -1166,15 +1438,15 @@ void DrawEpic() { /* given an 'epic', builds a new Ximage, and draws it. Basically @@ -19699,7 +28953,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (HaveSelection()) DrawSelection(0); } -@@ -1189,7 +1188,7 @@ +@@ -1189,7 +1461,7 @@ if (pic) free(pic); xvDestroyImage(theImage); theImage = NULL; pic = egampic = epic = cpic = NULL; @@ -19708,7 +28962,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (picComments) free(picComments); picComments = (char *) NULL; ChangeCommentText(); -@@ -1203,7 +1202,7 @@ +@@ -1203,7 +1475,7 @@ byte *pic824, *rmap, *gmap, *bmap; int ptype, wide, high; { @@ -19717,7 +28971,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c * * takes a wide*high input image, of type 'ptype' (PIC8, PIC24) * (if PIC8, colormap is specified by rmap,gmap,bmap) -@@ -1212,14 +1211,14 @@ +@@ -1212,14 +1484,14 @@ * * Note: this algorithm is *only* used when running on a 1-bit display */ @@ -19735,7 +28989,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (ptype == PIC8) { /* monoify colormap */ for (i=0; i<256; i++) rgb[i] = MONO(rmap[i], gmap[i], bmap[i]); -@@ -1234,7 +1233,7 @@ +@@ -1234,7 +1506,7 @@ thisline = (int *) malloc(wide * sizeof(int)); nextline = (int *) malloc(wide * sizeof(int)); @@ -19744,7 +28998,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c FatalError("ran out of memory in floydDitherize1()\n"); -@@ -1249,10 +1248,10 @@ +@@ -1249,10 +1521,10 @@ *tmpptr++ = fsgamcr[rgb[*pp]]; } @@ -19757,7 +29011,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c for (i=0; i<high; i++) { if ((i&0x3f) == 0) WaitCursor(); -@@ -1326,7 +1325,7 @@ +@@ -1326,7 +1598,7 @@ /************************/ @@ -19766,7 +29020,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c bval, wval) byte *inpic, *rmap, *gmap, *bmap; int w,h, intype, bval, wval; -@@ -1338,14 +1337,21 @@ +@@ -1338,14 +1610,21 @@ * and 'wval' as the 'black' and 'white' pixel values, respectively */ @@ -19783,7 +29037,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c + SetISTR(ISTR_WARNING, "Invalid image dimensions for dithering"); + return (byte *)NULL; + } -+ ++ + outpic = (byte *) malloc((size_t) npixels); if (!outpic) return outpic; - @@ -19791,7 +29045,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (intype == PIC8) { /* monoify colormap */ for (i=0; i<256; i++) -@@ -1353,9 +1359,9 @@ +@@ -1353,9 +1632,9 @@ } @@ -19804,7 +29058,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c FatalError("ran out of memory in FSDither()\n"); -@@ -1394,13 +1400,13 @@ +@@ -1394,13 +1673,13 @@ pp = outpic + i * w; thisptr = thisline; nextptr = nextline; @@ -19821,7 +29075,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (i<h1) { nextptr[0] += ((err*5)/16); if (j>0) nextptr[-1] += ((err*3)/16); -@@ -1414,9 +1420,9 @@ +@@ -1414,9 +1693,9 @@ for (j=w-1; j>=0; j--, pp--, thisptr--, nextptr--) { if (*thisptr<128) { err = *thisptr; *pp = (byte) bval; } else { err = *thisptr-255; *pp = (byte) wval; } @@ -19833,7 +29087,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (i<h1) { nextptr[0] += ((err*5)/16); if (j>0) nextptr[-1] += (err/16); -@@ -1449,8 +1455,8 @@ +@@ -1449,8 +1728,8 @@ } @@ -19844,7 +29098,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c cols, rMap, gMap, bMap); else if (picType == PIC24) theImage = Pic24ToXImage(egampic, (u_int) eWIDE, (u_int) eHIGH); -@@ -1482,7 +1488,7 @@ +@@ -1482,7 +1761,7 @@ if (!pic8) return xim; /* shouldn't happen */ @@ -19853,7 +29107,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c fprintf(stderr,"Pic8ToXImage(): creating a %dx%d Ximage, %d bits deep\n", wide, high, dispDEEP); -@@ -1491,7 +1497,7 @@ +@@ -1491,7 +1770,7 @@ if (dispDEEP == 1) { byte *imagedata; @@ -19862,7 +29116,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c wide, high, 32, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -1506,11 +1512,11 @@ +@@ -1506,11 +1785,11 @@ /* if ncols==0, do a 'black' and 'white' dither */ if (ncols == 0) { @@ -19876,7 +29130,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c (int) ((dispDEEP <= 8) ? white : 1)); } -@@ -1521,14 +1527,14 @@ +@@ -1521,14 +1800,14 @@ case 8: { byte *imagedata, *ip, *pp; int j, imWIDE, nullCount; @@ -19894,7 +29148,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c pp = (dithpic) ? dithpic : pic8; for (i=0, ip=imagedata; i<high; i++) { -@@ -1543,9 +1549,9 @@ +@@ -1543,9 +1822,9 @@ for (j=0; j<nullCount; j++, ip++) *ip = 0; } @@ -19906,7 +29160,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c 32, imWIDE); if (!xim) FatalError("couldn't create xim!"); } -@@ -1554,13 +1560,13 @@ +@@ -1554,13 +1833,13 @@ /*********************************/ @@ -19922,7 +29176,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c wide, high, 8, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -1569,7 +1575,7 @@ +@@ -1569,7 +1848,7 @@ if (!imagedata) FatalError("couldn't malloc imagedata"); xim->data = (char *) imagedata; @@ -19931,7 +29185,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c pp = (dithpic) ? dithpic : pic8; if (xim->bits_per_pixel == 4) { -@@ -1601,20 +1607,20 @@ +@@ -1601,20 +1880,20 @@ else FatalError("This display's too bizarre. Can't create XImage."); } break; @@ -19956,7 +29210,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c wide, high, 8, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -1674,11 +1680,11 @@ +@@ -1674,11 +1953,11 @@ *ip = (dithpic) ? *pp : (byte) xcolors[*pp]; } } @@ -19970,7 +29224,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /*********************************/ -@@ -1686,8 +1692,8 @@ +@@ -1686,8 +1965,8 @@ case 6: { byte *imagedata, *ip, *pp; int bperline; @@ -19981,7 +29235,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c wide, high, 8, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -1707,17 +1713,16 @@ +@@ -1707,17 +1986,16 @@ } } break; @@ -20002,7 +29256,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (!imagedata) FatalError("couldn't malloc imagedata"); xim = XCreateImage(theDisp,theVisual,dispDEEP,ZPixmap,0, -@@ -1736,10 +1741,12 @@ +@@ -1736,10 +2014,12 @@ if (xim->byte_order == MSBFirst) { for (i=wide*high, ip=imagedata; i>0; i--,pp++) { if (((i+1)&0x1ffff) == 0) WaitCursor(); @@ -20019,7 +29273,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c } } else { /* LSBFirst */ -@@ -1749,14 +1756,14 @@ +@@ -1749,14 +2029,14 @@ if (dithpic) xcol = ((*pp) ? white : black) & 0xffff; else xcol = xcolors[*pp]; @@ -20037,7 +29291,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /*********************************/ case 24: -@@ -1766,7 +1773,7 @@ +@@ -1766,7 +2046,7 @@ imagedata = (byte *) malloc((size_t) (4*wide*high)); if (!imagedata) FatalError("couldn't malloc imagedata"); @@ -20046,7 +29300,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c xim = XCreateImage(theDisp,theVisual,dispDEEP,ZPixmap,0, (char *) imagedata, wide, high, 32, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -1774,7 +1781,7 @@ +@@ -1774,7 +2054,7 @@ do32 = (xim->bits_per_pixel == 32); pp = (dithpic) ? dithpic : pic8; @@ -20055,18 +29309,23 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (xim->byte_order == MSBFirst) { for (i=0, ip=imagedata; i<high; i++) { if (((i+1)&0x7f) == 0) WaitCursor(); -@@ -1809,8 +1816,8 @@ +@@ -1809,11 +2089,11 @@ /*********************************/ - - default: +- sprintf(str,"no code to handle this display type (%d bits deep)", + + default: - sprintf(str,"no code to handle this display type (%d bits deep)", ++ sprintf(dummystr,"no code to handle this display type (%d bits deep)", dispDEEP); - FatalError(str); -@@ -1823,7 +1830,7 @@ +- FatalError(str); ++ FatalError(dummystr); + break; + } + +@@ -1823,7 +2103,7 @@ return(xim); } @@ -20075,7 +29334,16 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /***********************************/ XImage *Pic24ToXImage(pic24, wide, high) -@@ -1840,8 +1847,8 @@ +@@ -1831,7 +2111,7 @@ + unsigned int wide, high; + { + /* +- * this has to do the none-to-simple bit of converting the data in 'pic24' ++ * This has to do the none-too-simple bit of converting the data in 'pic24' + * into something usable by X. + * + * There are two major approaches: if we're displaying on a TrueColor +@@ -1840,12 +2120,12 @@ * variation of RGB the X device in question wants. No color allocation * is involved. * @@ -20086,7 +29354,12 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c * mode. (In that by this point, a 3/3/2 standard colormap has been * created for our use (though all 256 colors may not be unique...), and * we're just going to display the 24-bit picture by dithering with those -@@ -1861,7 +1868,7 @@ +- * colors ++ * colors.) + * + */ + +@@ -1861,7 +2141,7 @@ if (dispDEEP == 1) { byte *imagedata; @@ -20095,27 +29368,259 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c wide, high, 32, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -1929,8 +1936,8 @@ - for (j=0, ip=lip; j<wide; j++) { - r = *pp++; g = *pp++; b = *pp++; +@@ -1883,33 +2163,17 @@ + /* Non-ColorMapped Visuals: TrueColor, DirectColor */ + /************************************************************************/ + +- unsigned long r, g, b, rmask, gmask, bmask, xcol; +- int rshift, gshift, bshift, bperpix, bperline, border, cshift; +- int maplen; ++ unsigned long xcol; ++ int bperpix, bperline; + byte *imagedata, *lip, *ip, *pp; + +- /* compute various shifting constants that we'll need... */ +- +- rmask = theVisual->red_mask; +- gmask = theVisual->green_mask; +- bmask = theVisual->blue_mask; +- +- rshift = 7 - highbit(rmask); +- gshift = 7 - highbit(gmask); +- bshift = 7 - highbit(bmask); +- +- maplen = theVisual->map_entries; +- if (maplen>256) maplen=256; +- cshift = 7 - highbit((u_long) (maplen-1)); +- + xim = XCreateImage(theDisp, theVisual, dispDEEP, ZPixmap, 0, NULL, + wide, high, 32, 0); + if (!xim) FatalError("couldn't create X image!"); + + bperline = xim->bytes_per_line; + bperpix = xim->bits_per_pixel; +- border = xim->byte_order; + + imagedata = (byte *) malloc((size_t) (high * bperline)); + if (!imagedata) FatalError("couldn't malloc imagedata"); +@@ -1923,85 +2187,141 @@ + FatalError(buf); + } + ++ screen_init(); + +- lip = imagedata; pp = pic24; +- for (i=0; i<high; i++, lip+=bperline) { +- for (j=0, ip=lip; j<wide; j++) { +- r = *pp++; g = *pp++; b = *pp++; +- - /* shift r,g,b so that high bit of 8-bit color specification is - * aligned with high bit of r,g,b-mask in visual, -+ /* shift r,g,b so that high bit of 8-bit color specification is -+ * aligned with high bit of r,g,b-mask in visual, - * AND each component with its mask, - * and OR the three components together - */ -@@ -1945,7 +1952,7 @@ - /* shift the bits around */ - if (rshift<0) r = r << (-rshift); - else r = r >> rshift; +- * AND each component with its mask, +- * and OR the three components together +- */ +- +- if (theVisual->class == DirectColor) { +- r = (u_long) directConv[(r>>cshift) & 0xff] << cshift; +- g = (u_long) directConv[(g>>cshift) & 0xff] << cshift; +- b = (u_long) directConv[(b>>cshift) & 0xff] << cshift; +- } +- +- +- /* shift the bits around */ +- if (rshift<0) r = r << (-rshift); +- else r = r >> rshift; - -+ - if (gshift<0) g = g << (-gshift); - else g = g >> gshift; +- if (gshift<0) g = g << (-gshift); +- else g = g >> gshift; +- +- if (bshift<0) b = b << (-bshift); +- else b = b >> bshift; +- +- r = r & rmask; +- g = g & gmask; +- b = b & bmask; +- +- xcol = r | g | b; +- +- if (bperpix == 32) { +- if (border == MSBFirst) { +- *ip++ = (xcol>>24) & 0xff; +- *ip++ = (xcol>>16) & 0xff; +- *ip++ = (xcol>>8) & 0xff; +- *ip++ = xcol & 0xff; +- } +- else { /* LSBFirst */ +- *ip++ = xcol & 0xff; +- *ip++ = (xcol>>8) & 0xff; +- *ip++ = (xcol>>16) & 0xff; +- *ip++ = (xcol>>24) & 0xff; +- } +- } +- +- else if (bperpix == 24) { +- if (border == MSBFirst) { +- *ip++ = (xcol>>16) & 0xff; +- *ip++ = (xcol>>8) & 0xff; +- *ip++ = xcol & 0xff; +- } +- else { /* LSBFirst */ +- *ip++ = xcol & 0xff; +- *ip++ = (xcol>>8) & 0xff; +- *ip++ = (xcol>>16) & 0xff; +- } +- } ++#ifdef ENABLE_FIXPIX_SMOOTH ++ if (do_fixpix_smooth) { ++#if 0 ++ /* If we wouldn't have to save the original pic24 image data, ++ * the following code would do the dither job by overwriting ++ * the image data, and the normal render code would then work ++ * without any change on that data. ++ * Unfortunately, this approach would hurt the xv assumptions... ++ */ ++ if (bperpix < 24) { ++ FSBUF *fs = fs2_init(wide); ++ if (fs) { ++ fs2_dither(fs, pic24, 3, high, wide); ++ free(fs); ++ } ++ } ++#else ++ /* ...so we have to take a different approach with linewise ++ * dithering/rendering in a loop using a temporary line buffer. ++ */ ++ if (bperpix < 24) { ++ FSBUF *fs = fs2_init(wide); ++ if (fs) { ++ byte *row_buf = malloc((size_t)wide * 3); ++ if (row_buf) { ++ int nc = 3; ++ byte *picp = pic24; lip = imagedata; ++ ++ switch (bperpix) { ++ case 8: ++ for (i=0; i<high; i++, lip+=bperline, picp+=(size_t)wide*3) { ++ memcpy(row_buf, picp, (size_t)wide * 3); ++ nc = fs2_dither(fs, row_buf, nc, 1, wide); ++ for (j=0, ip=lip, pp=row_buf; j<wide; j++) { ++ xcol = screen_rgb[0][*pp++]; ++ xcol |= screen_rgb[1][*pp++]; ++ xcol |= screen_rgb[2][*pp++]; ++ *ip++ = xcol & 0xff; ++ } ++ } ++ break; ++ ++ case 16: ++ for (i=0; i<high; i++, lip+=bperline, picp+=(size_t)wide*3) { ++ CARD16 *ip16 = (CARD16 *)lip; ++ memcpy(row_buf, picp, (size_t)wide * 3); ++ nc = fs2_dither(fs, row_buf, nc, 1, wide); ++ for (j=0, pp=row_buf; j<wide; j++) { ++ xcol = screen_rgb[0][*pp++]; ++ xcol |= screen_rgb[1][*pp++]; ++ xcol |= screen_rgb[2][*pp++]; ++ *ip16++ = (CARD16)xcol; ++ } ++ } ++ break; ++ } /* end switch */ ++ ++ free(row_buf); ++ free(fs); + +- else if (bperpix == 16) { +- if (border == MSBFirst) { +- *ip++ = (xcol>>8) & 0xff; +- *ip++ = xcol & 0xff; +- } +- else { /* LSBFirst */ +- *ip++ = xcol & 0xff; +- *ip++ = (xcol>>8) & 0xff; ++ return xim; + } +- } +- +- else if (bperpix == 8) { +- *ip++ = xcol & 0xff; +- } ++ free(fs); ++ } + } ++#endif /* 0? */ + } ++#endif /* ENABLE_FIXPIX_SMOOTH */ ++ ++ lip = imagedata; pp = pic24; ++ ++ switch (bperpix) { ++ case 8: ++ for (i=0; i<high; i++, lip+=bperline) { ++ for (j=0, ip=lip; j<wide; j++) { ++ xcol = screen_rgb[0][*pp++]; ++ xcol |= screen_rgb[1][*pp++]; ++ xcol |= screen_rgb[2][*pp++]; ++ *ip++ = xcol & 0xff; ++ } ++ } ++ break; ++ ++ case 16: ++ for (i=0; i<high; i++, lip+=bperline) { ++ CARD16 *ip16 = (CARD16 *)lip; ++ for (j=0; j<wide; j++) { ++ xcol = screen_rgb[0][*pp++]; ++ xcol |= screen_rgb[1][*pp++]; ++ xcol |= screen_rgb[2][*pp++]; ++ *ip16++ = (CARD16)xcol; ++ } ++ } ++ break; ++ ++ case 24: ++ for (i=0; i<high; i++, lip+=bperline) { ++ for (j=0, ip=lip; j<wide; j++) { ++ xcol = screen_rgb[0][*pp++]; ++ xcol |= screen_rgb[1][*pp++]; ++ xcol |= screen_rgb[2][*pp++]; ++#ifdef USE_24BIT_ENDIAN_FIX ++ if (border == MSBFirst) { ++ *ip++ = (xcol>>16) & 0xff; ++ *ip++ = (xcol>>8) & 0xff; ++ *ip++ = xcol & 0xff; ++ } ++ else { /* LSBFirst */ ++ *ip++ = xcol & 0xff; ++ *ip++ = (xcol>>8) & 0xff; ++ *ip++ = (xcol>>16) & 0xff; ++ } ++#else /* GRR: this came with the FixPix patch, but I don't think it's right */ ++ *ip++ = (xcol >> 16) & 0xff; /* (no way to test, however, so */ ++ *ip++ = (xcol >> 8) & 0xff; /* it's left enabled by default) */ ++ *ip++ = xcol & 0xff; ++#endif ++ } ++ } ++ break; ++ ++ case 32: ++ for (i=0; i<high; i++, lip+=bperline) { ++ CARD32 *ip32 = (CARD32 *)lip; ++ for (j=0; j<wide; j++) { ++ xcol = screen_rgb[0][*pp++]; ++ xcol |= screen_rgb[1][*pp++]; ++ xcol |= screen_rgb[2][*pp++]; ++ *ip32++ = (CARD32)xcol; ++ } ++ } ++ break; ++ } /* end switch */ + } -@@ -2019,17 +2026,17 @@ + else { +@@ -2019,17 +2339,17 @@ bwdith = 0; if (ncols == 0 && dispDEEP != 1) { /* do 'black' and 'white' dither */ @@ -20137,7 +29642,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c NULL, NULL, NULL, stdrdisp, stdgdisp, stdbdisp, 256); } -@@ -2046,14 +2053,14 @@ +@@ -2046,14 +2366,14 @@ case 8: { byte *imagedata, *ip, *pp; int j, imWIDE, nullCount; @@ -20155,7 +29660,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c for (i=0, pp=pic8, ip=imagedata; i<high; i++) { if (((i+1)&0x7f) == 0) WaitCursor(); -@@ -2066,7 +2073,7 @@ +@@ -2066,7 +2386,7 @@ } xim = XCreateImage(theDisp, theVisual, dispDEEP, ZPixmap, 0, @@ -20164,7 +29669,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c 32, imWIDE); if (!xim) FatalError("couldn't create xim!"); } -@@ -2074,14 +2081,14 @@ +@@ -2074,14 +2394,14 @@ /*********************************/ @@ -20182,7 +29687,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c wide, high, 32, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -2123,14 +2130,14 @@ +@@ -2123,14 +2443,14 @@ else FatalError("This display's too bizarre. Can't create XImage."); } break; @@ -20200,7 +29705,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c (Randolf Werner) for NeXT 2bit grayscale with MouseX */ byte *imagedata, *ip, *pp; -@@ -2138,7 +2145,7 @@ +@@ -2138,7 +2458,7 @@ int bperline, half, j; unsigned long xcol; @@ -20209,7 +29714,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c wide, high, 32, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -2201,22 +2208,22 @@ +@@ -2201,22 +2521,22 @@ } } } @@ -20238,7 +29743,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (xim->bits_per_pixel != 8) FatalError("This display's too bizarre. Can't create XImage."); -@@ -2238,7 +2245,7 @@ +@@ -2238,7 +2558,7 @@ } break; @@ -20247,7 +29752,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /*********************************/ case 15: -@@ -2282,7 +2289,7 @@ +@@ -2282,7 +2602,7 @@ } break; @@ -20256,7 +29761,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /*********************************/ /* this wouldn't seem likely to happen, but what the heck... */ -@@ -2295,7 +2302,7 @@ +@@ -2295,7 +2615,7 @@ imagedata = (byte *) malloc((size_t) (4*wide*high)); if (!imagedata) FatalError("couldn't malloc imagedata"); @@ -20265,7 +29770,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c xim = XCreateImage(theDisp,theVisual,dispDEEP,ZPixmap,0, (char *) imagedata, wide, high, 32, 0); if (!xim) FatalError("couldn't create xim!"); -@@ -2303,7 +2310,7 @@ +@@ -2303,7 +2623,7 @@ bperpix = xim->bits_per_pixel; pp = pic8; @@ -20274,7 +29779,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (xim->byte_order == MSBFirst) { for (i=wide*high, ip=imagedata; i>0; i--,pp++) { if (((i+1)&0x1ffff) == 0) WaitCursor(); -@@ -2327,7 +2334,7 @@ +@@ -2327,7 +2647,7 @@ if (bperpix == 32) *ip++ = 0; } } @@ -20283,7 +29788,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c break; } /* end of the switch */ -@@ -2346,7 +2353,7 @@ +@@ -2346,7 +2666,7 @@ int mode; { /* move checkmark */ @@ -20292,7 +29797,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c conv24MB.flags[CONV24_24BIT] = (mode==PIC24); if (mode == PIC24) { -@@ -2383,15 +2390,13 @@ +@@ -2383,15 +2703,13 @@ void Change824Mode(mode) int mode; { @@ -20309,7 +29814,23 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c } /* should probably actually *do* something involving colors, regenrating -@@ -2474,7 +2479,7 @@ +@@ -2453,6 +2771,7 @@ + + + /***********************/ ++#if 0 /* NOTUSED */ + static int highbit(ul) + unsigned long ul; + { +@@ -2465,6 +2784,7 @@ + for (i=31; ((ul & hb) == 0) && i>=0; i--, ul<<=1); + return i; + } ++#endif /* 0 - NOTUSED */ + + + +@@ -2474,7 +2794,7 @@ int ptype, w,h, sx,sy,sw,sh; { /* mallocs and returns the selected subimage (sx,sy,sw,sh) of pic. @@ -20318,7 +29839,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c NEVER RETURNS NULL */ byte *rpic, *sp, *dp; -@@ -2520,7 +2525,6 @@ +@@ -2520,7 +2840,6 @@ installs the new pic and all that... Returns '0' on failure */ int rv; @@ -20326,7 +29847,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (padPic) free(padPic); if (holdcomment) free(holdcomment); -@@ -2530,8 +2534,8 @@ +@@ -2530,8 +2849,8 @@ rv = 1; @@ -20337,7 +29858,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c "\nI see"); return 0; } -@@ -2539,8 +2543,8 @@ +@@ -2539,8 +2858,8 @@ WaitCursor(); if (mode == PAD_SOLID) rv = doPadSolid(str, wide, high, opaque,omode); @@ -20348,7 +29869,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c SetCursors(-1); -@@ -2556,7 +2560,7 @@ +@@ -2556,7 +2875,7 @@ return 1; } @@ -20357,7 +29878,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /***********************************/ int LoadPad(pinfo, fname) -@@ -2645,7 +2649,7 @@ +@@ -2645,7 +2964,7 @@ return 0; } } @@ -20366,7 +29887,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c pic24 = (byte *) malloc(wide * high * 3 * sizeof(byte)); -@@ -2656,7 +2660,7 @@ +@@ -2656,7 +2975,7 @@ return 0; } @@ -20375,7 +29896,17 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* fill pic24 with solidRGB */ for (i=0,pp=pic24; i<wide*high; i++, pp+=3) { pp[0] = (solidRGB>>16) & 0xff; -@@ -2697,7 +2701,11 @@ +@@ -2676,6 +2995,9 @@ + char *str; + int wide, high, opaque,omode; + { ++#ifndef USE_MKSTEMP ++ int tmpfd; ++#endif + int i; + byte *bgpic24; + char syscmd[512], fname[128], errstr[512]; +@@ -2697,7 +3019,18 @@ #else strcpy(fname, "Sys$Disk:[]xvuXXXXXX"); #endif @@ -20383,11 +29914,18 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c + close(mkstemp(fname)); +#else mktemp(fname); ++ tmpfd = open(fname, O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); ++ if (tmpfd < 0) { ++ sprintf(errstr, "Error: can't create temporary file %s", fname); ++ ErrPopUp(errstr, "\nDoh!"); ++ return 0; ++ } ++ close(tmpfd); +#endif /* run bggen to generate the background */ sprintf(syscmd, "bggen -g %dx%d %s > %s", wide, high, str, fname); -@@ -2713,7 +2721,7 @@ +@@ -2713,7 +3046,7 @@ ErrPopUp(errstr, "\nDoh!"); return 0; } @@ -20396,7 +29934,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* read the file that's been created */ if (!ReadImageFile1(fname, &pinfo)) { -@@ -2791,7 +2799,7 @@ +@@ -2791,7 +3124,7 @@ int wide, high, opaque,omode; { /* copies 'pic' onto the given 24-bit background image, converts back to @@ -20405,7 +29943,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c frees pic24 if necessary */ byte *pp, *p24; -@@ -2806,30 +2814,30 @@ +@@ -2806,30 +3139,30 @@ /* copy 'pic' centered onto pic24. */ @@ -20447,7 +29985,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (omode == PAD_ORGB) { rval = (r * fg) / 100 + ((int) p24[0] * bg) / 100; gval = (g * fg) / 100 + ((int) p24[1] * bg) / 100; -@@ -2845,7 +2853,7 @@ +@@ -2845,7 +3178,7 @@ if (omode == PAD_OINT) { h = fh; @@ -20456,7 +29994,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* v = (fv * fg) / 100.0 + (bv * bg) / 100.0; */ v = (fv * bv * bw) + (fv * fw); } -@@ -2855,18 +2863,18 @@ +@@ -2855,18 +3188,18 @@ h = fh; /* s = (fs * fg) / 100.0 + (bs * bg) / 100.0; */ s = (fs * bs * bw) + (fs * fw); @@ -20479,7 +30017,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c double fx,fy, bx,by, ox,oy; if (fg == 100 || bg == 100) { /* E-Z special case */ -@@ -2874,17 +2882,17 @@ +@@ -2874,17 +3207,17 @@ else { h = bh; s = fs; v=fv; } } else { /* general case */ @@ -20501,7 +30039,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c /* convert ox,oy back into hue,sat */ s = sqrt((ox * ox) + (oy * oy)); if (ox == 0.0) { -@@ -2897,7 +2905,7 @@ +@@ -2897,7 +3230,7 @@ while (h<0.0) h += 360.0; while (h>=360.0) h -= 360.0; } @@ -20510,7 +30048,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c v = fv; } } -@@ -2924,7 +2932,7 @@ +@@ -2924,7 +3257,7 @@ v = (fv * bv * bw) + (fv * fw); hsv2rgb(h,s,v, &rval,&gval,&bval); } @@ -20519,7 +30057,7 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c RANGE(rval, 0, 255); RANGE(gval, 0, 255); RANGE(bval, 0, 255); *p24++ = rval; *p24++ = gval; *p24++ = bval; } -@@ -2958,12 +2966,15 @@ +@@ -2958,16 +3291,19 @@ /*******************************/ @@ -20537,16 +30075,23 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c ftype = ReadFileType(name); -@@ -2976,7 +2987,7 @@ +- if (ftype == RFT_COMPRESS) { /* handle compressed/gzipped files */ ++ if ((ftype == RFT_COMPRESS) || (ftype == RFT_BZIP2)) { /* handle .Z,gz,bz2 */ + #ifdef VMS + basefname[0] = '\0'; + strcpy(basefname, name); /* remove trailing .Z */ +@@ -2976,8 +3312,8 @@ #else uncName = name; #endif - +- if (UncompressFile(uncName, uncompname)) { + - if (UncompressFile(uncName, uncompname)) { ++ if (UncompressFile(uncName, uncompname, ftype)) { ftype = ReadFileType(uncompname); readname = uncompname; -@@ -3004,7 +3015,7 @@ + } +@@ -3004,7 +3340,7 @@ KillPageFiles(pinfo->pagebname, pinfo->numpages); if (!i || (i && (pinfo->w<=0 || pinfo->h<=0))) { @@ -20555,35 +30100,42 @@ diff -ruN xv-3.10a/xvimage.c xv-3.10a-bugfixes/xvimage.c if (pinfo->pic) free(pinfo->pic); if (pinfo->comment) free(pinfo->comment); } -@@ -3021,6 +3032,6 @@ - - +@@ -3018,9 +3354,3 @@ + return 1; + } +- +- +- - -+ - - -diff -ruN xv-3.10a/xvinfo.c xv-3.10a-bugfixes/xvinfo.c +- +- +diff -ru xv-3.10a/xvinfo.c xv-3.10a-enhancements/xvinfo.c --- xv-3.10a/xvinfo.c 1994-12-22 14:34:41.000000000 -0800 -+++ xv-3.10a-bugfixes/xvinfo.c 2004-05-16 18:03:43.000000000 -0700 ++++ xv-3.10a-enhancements/xvinfo.c 2007-05-13 14:11:03.000000000 -0700 @@ -1,4 +1,4 @@ -/* +/* * xvinfo.c - 'Info' box handling functions * * callable functions: -@@ -8,7 +8,7 @@ +@@ -8,8 +8,8 @@ * maps/unmaps window, etc. * RedrawInfo(x,y,w,h) - called by 'expose' events * SetInfoMode(mode) - changes amount of info Info window shows - * SetISTR(st, fmt, args) - sprintf's into ISTR #st. Redraws it in window -+ * SetISTR(st, fmt, args) - sprintf's into ISTR #st. Redraws it in window - * char *GetISTR(st) - returns pointer to ISTR #st, or NULL if st bogus +- * char *GetISTR(st) - returns pointer to ISTR #st, or NULL if st bogus ++ * SetISTR(st, fmt, args) - sprintf's into ISTR #st. Redraws it in window ++ * char *GetISTR(st) - returns pointer to ISTR #st, or NULL if st bogus */ -@@ -45,18 +45,18 @@ + #include "copyright.h" +@@ -43,20 +43,20 @@ + + /***************************************************/ void CreateInfo(geom) - char *geom; +-char *geom; ++ const char *geom; { - infoW = CreateWindow("xv info", "XVinfo", geom, INFOWIDE, INFOHIGH, + infoW = CreateWindow("xv info", "XVinfo", geom, INFOWIDE, INFOHIGH, @@ -20614,7 +30166,7 @@ diff -ruN xv-3.10a/xvinfo.c xv-3.10a-bugfixes/xvinfo.c infoUp = vis; } -@@ -74,15 +74,15 @@ +@@ -74,23 +74,23 @@ int x,y,w,h; { int i; @@ -20633,8 +30185,10 @@ diff -ruN xv-3.10a/xvinfo.c xv-3.10a-bugfixes/xvinfo.c 36 - pennnet_height/2); /* draw the credits */ -@@ -90,7 +90,7 @@ - CenterString(infoW, INFOWIDE/2, 36-LINEHIGH, str); +- sprintf(str,"XV - %s",REVDATE); +- CenterString(infoW, INFOWIDE/2, 36-LINEHIGH, str); ++ snprintf(dummystr, sizeof(dummystr), "XV - %s", REVDATE); ++ CenterString(infoW, INFOWIDE/2, 36-LINEHIGH, dummystr); CenterString(infoW, INFOWIDE/2, 36, "by John Bradley (bradley@dccs.upenn.edu)"); - CenterString(infoW, INFOWIDE/2, 36+LINEHIGH, @@ -20642,7 +30196,17 @@ diff -ruN xv-3.10a/xvinfo.c xv-3.10a-bugfixes/xvinfo.c "Copyright 1994, John Bradley - All Rights Reserved"); -@@ -139,8 +139,8 @@ +@@ -131,16 +131,16 @@ + static void drawFieldName(fnum) + int fnum; + { +- static char *fname[7] = { "Filename:", "Format:", "Resolution:", "Cropping:", +- "Expansion:", "Selection:", "Colors:" }; ++ static const char *fname[7] = { "Filename:", "Format:", "Resolution:", ++ "Cropping:", "Expansion:", "Selection:", "Colors:" }; + + XSetForeground(theDisp, theGC, infofg); + XSetBackground(theDisp, theGC, infobg); if (infoMode == INF_NONE || infoMode == INF_STR) return; if (infoMode == INF_PART && fnum>=3) return; @@ -20674,7 +30238,7 @@ diff -ruN xv-3.10a/xvinfo.c xv-3.10a-bugfixes/xvinfo.c XSetForeground(theDisp, theGC, infofg); XDrawString(theDisp, infoW, theGC, STLEFT, - TOPBASE + (st-ISTR_FILENAME)*LINEHIGH, istrs[st], -+ TOPBASE + (st-ISTR_FILENAME)*LINEHIGH, istrs[st], ++ TOPBASE + (st-ISTR_FILENAME)*LINEHIGH, istrs[st], (int) strlen(istrs[st])); } } @@ -20707,7 +30271,12 @@ diff -ruN xv-3.10a/xvinfo.c xv-3.10a-bugfixes/xvinfo.c drawStrings(); } } -@@ -237,9 +237,9 @@ +@@ -233,14 +233,14 @@ + + if (stnum>=0 && stnum < NISTR) { + fmt = va_arg(args, char *); +- if (fmt) vsprintf(istrs[stnum], fmt, args); ++ if (fmt) vsnprintf(istrs[stnum], sizeof(istrs[stnum]), fmt, args); else istrs[stnum][0] = '\0'; } va_end(args); @@ -20715,11 +30284,13 @@ diff -ruN xv-3.10a/xvinfo.c xv-3.10a-bugfixes/xvinfo.c + if (stnum == ISTR_COLOR) { - sprintf(istrs[ISTR_INFO], "%s %s %s", formatStr, -+ sprintf(istrs[ISTR_INFO], "%s %s %s", formatStr, - (picType==PIC8) ? "8-bit mode." : "24-bit mode.", +- (picType==PIC8) ? "8-bit mode." : "24-bit mode.", ++ snprintf(istrs[ISTR_INFO], sizeof(istrs[ISTR_INFO]), "%s %s %s", ++ formatStr, (picType==PIC8) ? "8-bit mode." : "24-bit mode.", istrs[ISTR_COLOR]); } -@@ -250,19 +250,19 @@ + +@@ -250,22 +250,22 @@ XFlush(theDisp); } @@ -20741,10 +30312,14 @@ diff -ruN xv-3.10a/xvinfo.c xv-3.10a-bugfixes/xvinfo.c + if (stnum == ISTR_WARNING && !ctrlUp && !infoUp && !anyBrowUp && strlen(istrs[stnum])) { OpenAlert(istrs[stnum]); - sleep(3); -diff -ruN xv-3.10a/xviris.c xv-3.10a-bugfixes/xviris.c +- sleep(3); ++ sleep(1); /* was 3, but _really_ slow for TIFFs with unknown tags... */ + CloseAlert(); + } + } +diff -ru xv-3.10a/xviris.c xv-3.10a-enhancements/xviris.c --- xv-3.10a/xviris.c 1994-12-22 14:34:47.000000000 -0800 -+++ xv-3.10a-bugfixes/xviris.c 2005-04-03 12:08:03.000000000 -0700 ++++ xv-3.10a-enhancements/xviris.c 2007-05-13 17:49:50.000000000 -0700 @@ -14,7 +14,7 @@ * * This code should work on machines with any byte order. @@ -20763,6 +30338,26 @@ diff -ruN xv-3.10a/xviris.c xv-3.10a-bugfixes/xviris.c char name[80]; u_long colormap; +@@ -80,7 +80,7 @@ + #define CHANOFFSET(z) (3-(z)) /* this is byte order dependent */ + + +-static int irisError PARM((char *, char *)); ++static int irisError PARM((const char *, const char *)); + static byte *getimagedata PARM((FILE *, IMAGE *)); + static void interleaverow PARM((byte *, byte *, int, int)); + static void expandrow PARM((byte *, byte *, int)); +@@ -97,8 +97,8 @@ + static void putlong PARM((FILE *, u_long)); + + +-static char *loaderr; +-static char *bname; ++static const char *loaderr; ++static const char *bname; + + /*****************************************************/ + int LoadIRIS(fname, pinfo) @@ -112,7 +112,8 @@ IMAGE img; byte *rawdata, *rptr; @@ -20847,7 +30442,7 @@ diff -ruN xv-3.10a/xviris.c xv-3.10a-bugfixes/xviris.c *bptr++ = rptr[3]; *bptr++ = rptr[2]; *bptr++ = rptr[1]; -@@ -220,7 +229,7 @@ +@@ -220,12 +229,12 @@ pinfo->comment = (char *) NULL; return 1; @@ -20856,7 +30451,13 @@ diff -ruN xv-3.10a/xviris.c xv-3.10a-bugfixes/xviris.c /*******************************************/ -@@ -237,15 +246,15 @@ + static int irisError(name, st) +- char *name, *st; ++ const char *name, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", name, st); + return 0; +@@ -237,41 +246,53 @@ FILE *fp; IMAGE *img; { @@ -20875,7 +30476,12 @@ diff -ruN xv-3.10a/xviris.c xv-3.10a-bugfixes/xviris.c rle = ISRLE(img->type); -@@ -257,21 +266,33 @@ + bpp = BPP(img->type); +- loaderr = (char *) NULL; ++ loaderr = (const char *) NULL; + + if (bpp != 1) { + loaderr = "image must have 1 byte per pix chan"; return (byte *) NULL; } @@ -21098,10 +30704,37 @@ diff -ruN xv-3.10a/xviris.c xv-3.10a-bugfixes/xviris.c *optr++ = 0; return (optr - rlebuf); } -diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c +diff -ru xv-3.10a/xvjpeg.c xv-3.10a-enhancements/xvjpeg.c --- xv-3.10a/xvjpeg.c 1995-01-05 00:17:13.000000000 -0800 -+++ xv-3.10a-bugfixes/xvjpeg.c 2005-03-27 16:23:06.000000000 -0800 -@@ -35,7 +35,7 @@ ++++ xv-3.10a-enhancements/xvjpeg.c 2007-05-13 17:47:11.000000000 -0700 +@@ -12,13 +12,17 @@ + + #include <setjmp.h> + +-#include "jpeglib.h" ++#include "jpeglib.h" /* currently defines JPEG_APP0 but not JPEG_APP1 */ + #include "jerror.h" + ++#ifndef JPEG_APP1 ++# define JPEG_APP1 (JPEG_APP0 + 1) /* EXIF marker */ ++#endif ++ + #define CREATOR_STR "CREATOR: " + + #if BITS_IN_JSAMPLE != 8 +- Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ ++ Sorry, this code copes only with 8-bit JSAMPLEs. /* deliberate syntax err */ + #endif + + +@@ -30,12 +34,12 @@ + #define J_BCANC 1 + #define BUTTH 24 + +-/* minimum size compression when doing a 'quick' image load. (of course, if +- the image *is* smaller than this, you'll get whatever size it actually is. ++/* Minimum size compression when doing a 'quick' image load. (Of course, if ++ the image *is* smaller than this, you'll get whatever size it actually is.) This is currently hardcoded to be twice the size of a schnauzer icon, as the schnauzer's the only thing that does a quick load... */ @@ -21110,7 +30743,42 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c #define QUICKHIGH 120 struct my_error_mgr { -@@ -80,28 +80,26 @@ +@@ -51,19 +55,33 @@ + static void clickJD PARM((int, int)); + static void doCmd PARM((int)); + static void writeJPEG PARM((void)); ++#if JPEG_LIB_VERSION > 60 ++METHODDEF(void) xv_error_exit PARM((j_common_ptr)); ++METHODDEF(void) xv_error_output PARM((j_common_ptr)); ++METHODDEF(void) xv_prog_meter PARM((j_common_ptr)); ++#else + METHODDEF void xv_error_exit PARM((j_common_ptr)); + METHODDEF void xv_error_output PARM((j_common_ptr)); + METHODDEF void xv_prog_meter PARM((j_common_ptr)); ++#endif + static unsigned int j_getc PARM((j_decompress_ptr)); ++#if JPEG_LIB_VERSION > 60 ++METHODDEF(boolean) xv_process_comment PARM((j_decompress_ptr)); ++METHODDEF(boolean) xv_process_app1 PARM((j_decompress_ptr)); ++#else + METHODDEF boolean xv_process_comment PARM((j_decompress_ptr)); ++METHODDEF boolean xv_process_app1 PARM((j_decompress_ptr)); ++#endif + static int writeJFIF PARM((FILE *, byte *, int,int,int)); + + + + /*** local variables ***/ + static char *filename; +-static char *fbasename; ++static const char *fbasename; + static char *comment; ++static byte *exifInfo; ++static int exifInfoSize; /* not a string => must track size explicitly */ + static int colorType; + + static DIAL qDial, smDial; +@@ -80,28 +98,26 @@ /***************************************************/ void CreateJPEGW() { @@ -21124,12 +30792,12 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c - - DCreate(&qDial, jpegW, 10, 10, 80, 100, 1, 100, 75, 5, + -+ DCreate(&qDial, jpegW, 10, 10, 80, 100, 1, 100, 75, 5, ++ DCreate(&qDial, jpegW, 10, 10, 80, 100, 1.0, 100.0, 75.0, 1.0, 5.0, infofg, infobg, hicol, locol, "Quality", "%"); - - DCreate(&smDial, jpegW, 120, 10, 80, 100, 0, 100, 0, 5, + -+ DCreate(&smDial, jpegW, 120, 10, 80, 100, 0, 100, 0, 5, ++ DCreate(&smDial, jpegW, 120, 10, 80, 100, 0.0, 100.0, 0.0, 1.0, 5.0, infofg, infobg, hicol, locol, "Smoothing", "%"); - - BTCreate(&jbut[J_BOK], jpegW, JWIDE-180-1, JHIGH-10-BUTTH-1, 80, BUTTH, @@ -21150,7 +30818,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c /***************************************************/ void JPEGDialog(vis) -@@ -122,32 +120,32 @@ +@@ -122,32 +138,32 @@ { /* check event to see if it's for one of our subwindows. If it is, deal accordingly, and return '1'. Otherwise, return '0' */ @@ -21191,7 +30859,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c if (e->button == Button1) { if (e->window == jpegW) clickJD(x,y); else if (e->window == qDial.win) DTrack(&qDial, x,y); -@@ -156,18 +154,18 @@ +@@ -156,18 +172,18 @@ } /* button1 */ else rv = 0; } /* button press */ @@ -21215,7 +30883,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c if (e->window == jpegW) { if (stlen) { if (buf[0] == '\r' || buf[0] == '\n') { /* enter */ -@@ -181,12 +179,12 @@ +@@ -181,12 +197,12 @@ else rv = 0; } else rv = 0; @@ -21230,19 +30898,38 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c return rv; } -@@ -211,17 +209,17 @@ - char *title3 = "quality = bigger file."; - char *title4 = "Use smoothing if saving"; - char *title5 = "an 8-bit image (eg, a GIF)."; -- -+ - char *qtitle1 = "Default = 75."; - char *qtitle2 = "Useful range"; - char *qtitle3 = "is 5-95."; - char *smtitle1 = "Default = 0 (none)."; - char *smtitle2 = "10-30 is enough"; - char *smtitle3 = "for typical GIFs."; -- +@@ -205,23 +221,24 @@ + static void drawJD(x,y,w,h) + int x,y,w,h; + { +- char *title = "Save JPEG file..."; +- char *title1 = "Quality value determines"; +- char *title2 = "compression rate: higher"; +- char *title3 = "quality = bigger file."; +- char *title4 = "Use smoothing if saving"; +- char *title5 = "an 8-bit image (eg, a GIF)."; +- +- char *qtitle1 = "Default = 75."; +- char *qtitle2 = "Useful range"; +- char *qtitle3 = "is 5-95."; +- char *smtitle1 = "Default = 0 (none)."; +- char *smtitle2 = "10-30 is enough"; +- char *smtitle3 = "for typical GIFs."; +- ++ const char *title = "Save JPEG file..."; ++ const char *title1 = "Quality value determines"; ++ const char *title2 = "compression rate: higher"; ++ const char *title3 = "quality = bigger file."; ++ const char *title4 = "Use smoothing if saving"; ++ const char *title5 = "an 8-bit image (eg, a GIF)."; ++ ++ const char *qtitle1 = "Default = 75."; ++ const char *qtitle2 = "Useful range"; ++ const char *qtitle3 = "is 5-95."; ++ ++ const char *smtitle1 = "Default = 0 (none)."; ++ const char *smtitle2 = "10-30 is enough"; ++ const char *smtitle3 = "for typical GIFs."; + int i; XRectangle xr; @@ -21251,7 +30938,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c xr.x = x; xr.y = y; xr.width = w; xr.height = h; XSetClipRectangles(theDisp, theGC, 0,0, &xr, 1, Unsorted); -@@ -240,11 +238,11 @@ +@@ -240,11 +257,11 @@ DrawString(jpegW, 15, 10+100+10+ASCENT, qtitle1); DrawString(jpegW, 15, 10+100+10+ASCENT+LINEHIGH, qtitle2); DrawString(jpegW, 15, 10+100+10+ASCENT+LINEHIGH*2, qtitle3); @@ -21265,7 +30952,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c XSetClipMask(theDisp, theGC, None); } -@@ -255,14 +253,14 @@ +@@ -255,14 +272,14 @@ { int i; BUTT *bp; @@ -21283,7 +30970,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c if (i<J_NBUTTS) { /* found one */ if (BTTrack(bp)) doCmd(i); } -@@ -281,7 +279,7 @@ +@@ -281,7 +298,7 @@ writeJPEG(); JPEGDialog(0); @@ -21292,7 +30979,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c fullname = GetDirFullName(); if (!ISPIPE(fullname[0])) { XVCreatedFile(fullname); -@@ -304,7 +302,7 @@ +@@ -304,7 +321,7 @@ static void writeJPEG() { FILE *fp; @@ -21301,7 +30988,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c register byte *ip, *ep; byte *inpix, *rmap, *gmap, *bmap; byte *image8, *image24; -@@ -322,6 +320,14 @@ +@@ -322,6 +339,14 @@ WaitCursor(); inpix = GenSavePic(&ptype, &w, &h, &pfree, &nc, &rmap, &gmap, &bmap); @@ -21316,7 +31003,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c image8 = image24 = (byte *) NULL; -@@ -332,37 +338,46 @@ +@@ -332,37 +357,46 @@ if (i==nc) colorType = F_GREYSCALE; /* made it all the way through */ } else { /* PIC24 */ @@ -21374,7 +31061,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c *ip++ = rmap[*ep]; *ip++ = gmap[*ep]; *ip++ = bmap[*ep]; -@@ -374,16 +389,16 @@ +@@ -374,16 +408,16 @@ } } @@ -21394,84 +31081,203 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c if (CloseOutFile(fp, filename, rv) == 0) DirBox(0); SetCursors(-1); } -@@ -400,7 +415,7 @@ +@@ -400,7 +434,11 @@ /**************************************************/ -METHODDEF void xv_error_exit(cinfo) -+METHODDEF void xv_error_exit(cinfo) ++#if JPEG_LIB_VERSION > 60 ++METHODDEF(void) xv_error_exit(cinfo) ++#else ++METHODDEF void xv_error_exit(cinfo) ++#endif j_common_ptr cinfo; { my_error_ptr myerr; -@@ -412,7 +427,7 @@ +@@ -412,7 +450,11 @@ /**************************************************/ -METHODDEF void xv_error_output(cinfo) -+METHODDEF void xv_error_output(cinfo) ++#if JPEG_LIB_VERSION > 60 ++METHODDEF(void) xv_error_output(cinfo) ++#else ++METHODDEF void xv_error_output(cinfo) ++#endif j_common_ptr cinfo; { my_error_ptr myerr; -@@ -464,7 +479,7 @@ +@@ -426,7 +468,11 @@ + + + /**************************************************/ +-METHODDEF void xv_prog_meter(cinfo) ++#if JPEG_LIB_VERSION > 60 ++METHODDEF(void) xv_prog_meter(cinfo) ++#else ++METHODDEF void xv_prog_meter(cinfo) ++#endif + j_common_ptr cinfo; + { + struct jpeg_progress_mgr *prog; +@@ -462,14 +508,16 @@ + struct my_error_mgr jerr; + JSAMPROW rowptr[1]; FILE *fp; - static byte *pic; +- static byte *pic; ++ const char *colorspace_name = "Color"; ++ byte *pic, *pic_end; long filesize; - int i,w,h,bperpix; + int i,w,h,bperpix,bperline,count; fbasename = BaseName(fname); -@@ -546,16 +561,16 @@ - if (cinfo.jpeg_color_space == JCS_GRAYSCALE) { - cinfo.out_color_space = JCS_GRAYSCALE; - cinfo.quantize_colors = FALSE; -- + pic = (byte *) NULL; + comment = (char *) NULL; ++ exifInfo = (byte *) NULL; + + pinfo->type = PIC8; + +@@ -485,14 +533,22 @@ + jerr.pub.output_message = xv_error_output; + + if (setjmp(jerr.setjmp_buffer)) { ++L1: + /* if we're here, it blowed up... */ + jpeg_destroy_decompress(&cinfo); + fclose(fp); +- if (pic) free(pic); +- if (comment) free(comment); +- +- pinfo->pic = (byte *) NULL; +- pinfo->comment = (char *) NULL; ++ if (pic) free(pic); ++ if (comment) free(comment); ++ if (exifInfo) free(exifInfo); + - SetISTR(ISTR_INFO,"Loading %dx%d Greyscale JPEG (%ld bytes)...", - w,h,filesize); -- ++ pinfo->pic = (byte *) NULL; ++ pinfo->comment = (char *) NULL; ++ pinfo->exifInfo = (byte *) NULL; ++ pinfo->exifInfoSize = 0; + - for (i=0; i<256; i++) pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; ++ comment = (char *) NULL; ++ exifInfo = (byte *) NULL; ++ exifInfoSize = 0; + + return 0; } - else { - cinfo.out_color_space = JCS_RGB; - cinfo.quantize_colors = FALSE; /* default: give 24-bit image to XV */ +@@ -500,6 +556,7 @@ + + jpeg_create_decompress(&cinfo); + jpeg_set_marker_processor(&cinfo, JPEG_COM, xv_process_comment); ++ jpeg_set_marker_processor(&cinfo, JPEG_APP1, xv_process_app1); + + /* hook up progress meter */ + prog.progress_monitor = xv_prog_meter; +@@ -515,9 +572,8 @@ + + + jpeg_calc_output_dimensions(&cinfo); +- w = cinfo.output_width; +- h = cinfo.output_height; +- pinfo->normw = w; pinfo->normh = h; ++ pinfo->normw = w = cinfo.output_width; ++ pinfo->normh = h = cinfo.output_height; + + if (quick) { + int wfac, hfac, fac; +@@ -543,75 +599,120 @@ + } + + +- if (cinfo.jpeg_color_space == JCS_GRAYSCALE) { +- cinfo.out_color_space = JCS_GRAYSCALE; +- cinfo.quantize_colors = FALSE; - -+ - if (!quick && picType==PIC8 && conv24MB.flags[CONV24_LOCK] == 1) { - /* - * we're locked into 8-bit mode: -@@ -563,23 +578,23 @@ - * if CONV24_SLOW, use JPEG's two-pass quantizer - * if CONV24_BEST, or other, ask for 24-bit image and hand it to XV - */ -- -+ - cinfo.desired_number_of_colors = 256; -- -+ - if (conv24 == CONV24_FAST || conv24 == CONV24_SLOW) { - cinfo.quantize_colors = TRUE; - state824=1; /* image was converted from 24 to 8 bits */ +- SetISTR(ISTR_INFO,"Loading %dx%d Greyscale JPEG (%ld bytes)...", +- w,h,filesize); +- +- for (i=0; i<256; i++) pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; +- } +- else { +- cinfo.out_color_space = JCS_RGB; +- cinfo.quantize_colors = FALSE; /* default: give 24-bit image to XV */ +- +- if (!quick && picType==PIC8 && conv24MB.flags[CONV24_LOCK] == 1) { +- /* +- * we're locked into 8-bit mode: +- * if CONV24_FAST, use JPEG's one-pass quantizer +- * if CONV24_SLOW, use JPEG's two-pass quantizer +- * if CONV24_BEST, or other, ask for 24-bit image and hand it to XV +- */ +- +- cinfo.desired_number_of_colors = 256; +- +- if (conv24 == CONV24_FAST || conv24 == CONV24_SLOW) { +- cinfo.quantize_colors = TRUE; +- state824=1; /* image was converted from 24 to 8 bits */ - -+ - cinfo.two_pass_quantize = (conv24 == CONV24_SLOW); +- cinfo.two_pass_quantize = (conv24 == CONV24_SLOW); ++ cinfo.quantize_colors = FALSE; /* default: give 24-bit image to XV */ ++ switch (cinfo.num_components) { ++ case 1: ++ cinfo.out_color_space = JCS_GRAYSCALE; ++ colorspace_name = "Greyscale"; ++ for (i=0; i<256; i++) pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; ++ break; ++ ++ case 3: ++ cinfo.out_color_space = JCS_RGB; ++ goto L2; ++ ++ case 4: ++ cinfo.out_color_space = JCS_CMYK; ++ colorspace_name = "4-Plane Color"; ++L2: ++ if (!quick && picType == PIC8 && conv24MB.flags[CONV24_LOCK] == 1) { ++ /* ++ * we're locked into 8-bit mode: ++ * if CONV24_FAST, use JPEG's one-pass quantizer ++ * if CONV24_SLOW, use JPEG's two-pass quantizer ++ * if CONV24_BEST, or other, ask for 24-bit image and hand it to XV ++ */ ++ cinfo.desired_number_of_colors = 256; ++ ++ if (conv24 == CONV24_FAST || conv24 == CONV24_SLOW) { ++ cinfo.quantize_colors = TRUE; ++ state824 = 1; /* image was converted from 24 to 8 bits */ ++ cinfo.two_pass_quantize = (conv24 == CONV24_SLOW); ++ } } - } +- } - -+ - SetISTR(ISTR_INFO,"Loading %dx%d Color JPEG (%ld bytes)...", - w,h,filesize); - } +- SetISTR(ISTR_INFO,"Loading %dx%d Color JPEG (%ld bytes)...", +- w,h,filesize); +- } - -+ - jpeg_calc_output_dimensions(&cinfo); /* note colorspace changes... */ +- jpeg_calc_output_dimensions(&cinfo); /* note colorspace changes... */ - ++ break; + +- if (cinfo.output_components != 1 && cinfo.output_components != 3) { +- SetISTR(ISTR_WARNING, "%s: can't read %d-plane JPEG file!", +- fbasename, cinfo.output_components); +- jpeg_destroy_decompress(&cinfo); +- fclose(fp); +- if (comment) free(comment); +- return 0; ++ default: ++ SetISTR(ISTR_WARNING, "%s: can't read %d-plane JPEG file!", ++ fbasename, cinfo.output_components); ++ goto L1; + } ++ SetISTR(ISTR_INFO, "Loading %dx%d %s JPEG (%ld bytes)...", w, h, ++ colorspace_name, filesize); + ++ jpeg_calc_output_dimensions(&cinfo); /* note colorspace changes... */ + - if (cinfo.output_components != 1 && cinfo.output_components != 3) { - SetISTR(ISTR_WARNING, "%s: can't read %d-plane JPEG file!", -@@ -594,7 +609,18 @@ bperpix = cinfo.output_components; pinfo->type = (bperpix == 1) ? PIC8 : PIC24; @@ -21481,21 +31287,21 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c + if (w <= 0 || h <= 0 || bperline/w < bperpix || count/h < bperline) { + SetISTR(ISTR_WARNING, "%s: image dimensions too large (%dx%d)", + fbasename, w, h); -+ jpeg_destroy_decompress(&cinfo); -+ fclose(fp); -+ if (comment) free(comment); -+ return 0; ++ goto L1; + } + + pic = (byte *) malloc((size_t) count); if (!pic) { SetISTR(ISTR_WARNING, "%s: can't read JPEG file - out of memory", fbasename); -@@ -603,15 +629,24 @@ - if (comment) free(comment); - return 0; +- jpeg_destroy_decompress(&cinfo); +- fclose(fp); +- if (comment) free(comment); +- return 0; ++ goto L1; } - ++ pic_end = pic + count; + jpeg_start_decompress(&cinfo); @@ -21503,11 +31309,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c + if (cinfo.output_scanline < 0) { /* should never happen, but... */ + SetISTR(ISTR_WARNING, "%s: invalid negative scanline (%d)", + fbasename, cinfo.output_scanline); -+ jpeg_destroy_decompress(&cinfo); -+ fclose(fp); -+ if (comment) free(comment); -+ free(pic); -+ return 0; ++ goto L1; + } rowptr[0] = (JSAMPROW) &pic[cinfo.output_scanline * w * bperpix]; (void) jpeg_read_scanlines(&cinfo, rowptr, (JDIMENSION) 1); @@ -21515,34 +31317,113 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c - + ++ /* Convert CMYK to RGB color space */ ++ ++ if (bperpix > 3) { ++ register byte *p = pic; ++ ++ /* According to documentation accompanying the IJG JPEG Library, it appears ++ * that some versions of Adobe Systems' "Photoshop" write inverted CMYK ++ * data, where Byte 0 represents 100% ink coverage instead of 0% ink as ++ * you'd expect. The JPEG Library's implementors made a policy decision ++ * not to correct for this in the Library, but instead force applications ++ * to deal with it; so we try to do that here: ++ */ ++ if (cinfo.saw_Adobe_marker) { /* assume inverted data */ ++ register byte *q = pic; ++ ++ do { ++ register int cmy, k = 255 - q[3]; ++ ++ if ((cmy = *q++ - k) < 0) cmy = 0; *p++ = cmy; /* R */ ++ if ((cmy = *q++ - k) < 0) cmy = 0; *p++ = cmy; /* G */ ++ if ((cmy = *q++ - k) < 0) cmy = 0; *p++ = cmy; /* B */ ++ } while (++q <= pic_end); ++ } ++ else { /* assume normal data */ ++ register byte *q = pic; ++ ++ do { ++ register int cmy, k = 255 - q[3]; ++ ++ if ((cmy = k - *q++) < 0) cmy = 0; *p++ = cmy; /* R */ ++ if ((cmy = k - *q++) < 0) cmy = 0; *p++ = cmy; /* G */ ++ if ((cmy = k - *q++) < 0) cmy = 0; *p++ = cmy; /* B */ ++ } while (++q <= pic_end); ++ } ++ pic = realloc(pic,p-pic); /* Release extra storage */ ++ } ++ ++ /* return 'PICINFO' structure to XV */ -@@ -623,7 +658,7 @@ +@@ -621,38 +722,59 @@ + pinfo->frmType = F_JPEG; + if (cinfo.out_color_space == JCS_GRAYSCALE) { - sprintf(pinfo->fullInfo, "Greyscale JPEG. (%ld bytes)", filesize); +- sprintf(pinfo->fullInfo, "Greyscale JPEG. (%ld bytes)", filesize); pinfo->colType = F_GREYSCALE; - + for (i=0; i<256; i++) pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; } else { -@@ -638,10 +673,10 @@ +- sprintf(pinfo->fullInfo, "Color JPEG. (%ld bytes)", filesize); + pinfo->colType = F_FULLCOLOR; + + if (cinfo.quantize_colors) { +- for (i=0; i<cinfo.actual_number_of_colors; i++) { +- pinfo->r[i] = cinfo.colormap[0][i]; +- pinfo->g[i] = cinfo.colormap[1][i]; +- pinfo->b[i] = cinfo.colormap[2][i]; ++ switch (bperpix) { ++ case 3: ++ for (i = 0; i < cinfo.actual_number_of_colors; i++) { ++ pinfo->r[i] = cinfo.colormap[0][i]; ++ pinfo->g[i] = cinfo.colormap[1][i]; ++ pinfo->b[i] = cinfo.colormap[2][i]; ++ } ++ break; ++ ++ case 4: ++ for (i = 0; i < cinfo.actual_number_of_colors; i++) { ++ register int cmy, k = cinfo.colormap[3][i]; ++ ++ if ((cmy = 255 - cinfo.colormap[0][i] - k) < 0) cmy = 0; ++ pinfo->r[i] = cmy; ++ if ((cmy = 255 - cinfo.colormap[1][i] - k) < 0) cmy = 0; ++ pinfo->g[i] = cmy; ++ if ((cmy = 255 - cinfo.colormap[2][i] - k) < 0) cmy = 0; ++ pinfo->b[i] = cmy; ++ } ++ break; } } } - - sprintf(pinfo->shrtInfo, "%dx%d %s JPEG. ", w,h, -+ -+ sprintf(pinfo->shrtInfo, "%dx%d %s JPEG. ", w,h, - (cinfo.out_color_space == JCS_GRAYSCALE) ? "Greyscale " : "Color "); +- (cinfo.out_color_space == JCS_GRAYSCALE) ? "Greyscale " : "Color "); - +- pinfo->comment = comment; ++ ++ sprintf(pinfo->fullInfo, "%s JPEG. (%ld bytes)", colorspace_name, filesize); ++ sprintf(pinfo->shrtInfo, "%dx%d %s JPEG. ", w, h, colorspace_name); + - pinfo->comment = comment; ++ pinfo->comment = comment; ++ pinfo->exifInfo = exifInfo; ++ pinfo->exifInfoSize = exifInfoSize; jpeg_finish_decompress(&cinfo); -@@ -651,8 +686,8 @@ - comment = (char *) NULL; + jpeg_destroy_decompress(&cinfo); + fclose(fp); + +- comment = (char *) NULL; ++ /* ownership transferred to pinfo */ ++ comment = (char *) NULL; ++ exifInfo = (byte *) NULL; ++ exifInfoSize = 0; ++ return 1; } - @@ -21552,7 +31433,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c /**************************************************/ -@@ -660,7 +695,7 @@ +@@ -660,7 +782,7 @@ j_decompress_ptr cinfo; { struct jpeg_source_mgr *datasrc = cinfo->src; @@ -21561,7 +31442,20 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c if (datasrc->bytes_in_buffer == 0) { if (! (*datasrc->fill_input_buffer) (cinfo)) ERREXIT(cinfo, JERR_CANT_SUSPEND); -@@ -688,7 +723,7 @@ +@@ -671,7 +793,11 @@ + + + /**************************************************/ +-METHODDEF boolean xv_process_comment(cinfo) ++#if JPEG_LIB_VERSION > 60 ++METHODDEF(boolean) xv_process_comment(cinfo) ++#else ++METHODDEF boolean xv_process_comment(cinfo) ++#endif + j_decompress_ptr cinfo; + { + int length, hasnull; +@@ -688,7 +814,7 @@ } else comment = (char *) realloc(comment, strlen(comment) + length + 1); if (!comment) FatalError("out of memory in xv_process_comment"); @@ -21570,11 +31464,66 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c oldsp = sp = comment + strlen(comment); hasnull = 0; -@@ -770,19 +805,19 @@ +@@ -705,6 +831,41 @@ + } + + ++/**************************************************/ ++#if JPEG_LIB_VERSION > 60 ++METHODDEF(boolean) xv_process_app1(cinfo) /* Geoff H. Kuenning 20030331 */ ++#else ++METHODDEF boolean xv_process_app1(cinfo) ++#endif ++ j_decompress_ptr cinfo; ++{ ++ int length; ++ unsigned int ch; ++ byte *sp; ++ ++ length = j_getc(cinfo) << 8; ++ length += j_getc(cinfo); ++ length -= 2; /* discount the length word itself */ ++ ++ if (!exifInfo) { ++ exifInfo = (byte *) malloc((size_t) length); ++ exifInfoSize = 0; ++ } ++ else exifInfo = (byte *) realloc(exifInfo, exifInfoSize + length); ++ if (!exifInfo) FatalError("out of memory in xv_process_app1 (EXIF info)"); ++ ++ sp = exifInfo + exifInfoSize; ++ exifInfoSize += length; ++ ++ while (length-- > 0) { ++ ch = j_getc(cinfo); ++ *sp++ = (byte) ch; ++ } ++ ++ return TRUE; ++} ++ ++ + + + /***************************************************************************/ +@@ -759,8 +920,8 @@ + + + jpeg_set_defaults(&cinfo); +- jpeg_set_quality(&cinfo, qDial.val, TRUE); +- cinfo.smoothing_factor = smDial.val; ++ jpeg_set_quality(&cinfo, (int)qDial.val, TRUE); ++ cinfo.smoothing_factor = (int)smDial.val; + + + jpeg_start_compress(&cinfo, TRUE); +@@ -769,20 +930,20 @@ + /*** COMMENT HANDLING ***/ sprintf(xvcmt, "%sXV %s Quality = %d, Smoothing = %d\n", - CREATOR_STR, REVDATE, qDial.val, smDial.val); +- CREATOR_STR, REVDATE, qDial.val, smDial.val); - ++ CREATOR_STR, REVDATE, (int)qDial.val, (int)smDial.val); + if (picComments) { /* append XV comment */ char *sp, *sp1; int done; @@ -21594,7 +31543,7 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c sp = comment; done = 0; while (!done && *sp) { if (strncmp(sp, CREATOR_STR, strlen(CREATOR_STR)) == 0) { -@@ -801,7 +836,7 @@ +@@ -801,7 +962,7 @@ } } @@ -21603,16 +31552,20 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c If none, add 2. If one, add 1. If two or more, add none. */ sp = comment + strlen(comment); -@@ -814,15 +849,15 @@ +@@ -814,15 +975,18 @@ strcat(comment, xvcmt); } else comment = xvcmt; - - +- jpeg_write_marker(&cinfo,JPEG_COM,(byte *) comment,(u_int) strlen(comment)); +- + + - jpeg_write_marker(&cinfo,JPEG_COM,(byte *) comment,(u_int) strlen(comment)); -- ++ jpeg_write_marker(&cinfo, JPEG_COM, (byte *)comment, (u_int)strlen(comment)); ++ ++ if (picExifInfo) jpeg_write_marker(&cinfo, JPEG_APP1, (byte *)picExifInfo, ++ (u_int)picExifInfoSize); + while (cinfo.next_scanline < cinfo.image_height) { rowptr[0] = (JSAMPROW) &pic[cinfo.next_scanline * w * bperpix]; @@ -21623,10 +31576,46 @@ diff -ruN xv-3.10a/xvjpeg.c xv-3.10a-bugfixes/xvjpeg.c jpeg_finish_compress(&cinfo); jpeg_destroy_compress(&cinfo); return 0; -diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c +@@ -831,4 +995,27 @@ + + + ++ ++/*******************************************/ ++void ++VersionInfoJPEG() /* GRR 19980605, 19980607 */ ++{ ++ int major = JPEG_LIB_VERSION / 10; ++ int minor = JPEG_LIB_VERSION % 10; ++ char minoralpha[2]; ++ ++ if (minor) { ++ minoralpha[0] = (char)(minor - 1 + 'a'); ++ minoralpha[1] = '\0'; ++ } else ++ minoralpha[0] = '\0'; ++ ++/* fprintf(stderr, " Compiled with libjpeg %d.%d.\n", major, minor); */ ++ fprintf(stderr, " Compiled with libjpeg %d%s.\n", major, minoralpha); ++} ++ ++ ++ ++ ++ + #endif /* HAVE_JPEG */ +diff -ru xv-3.10a/xvmisc.c xv-3.10a-enhancements/xvmisc.c --- xv-3.10a/xvmisc.c 1995-01-13 15:41:34.000000000 -0800 -+++ xv-3.10a-bugfixes/xvmisc.c 2005-03-20 22:47:06.000000000 -0800 -@@ -28,6 +28,8 @@ ++++ xv-3.10a-enhancements/xvmisc.c 2007-05-13 17:32:59.000000000 -0700 +@@ -21,13 +21,15 @@ + * void LoadFishCursors() + * void WaitCursor() + * void SetCursors(int) +- * char *BaseName(char *) ++ * const char *BaseName(const char *) + * void DrawTempGauge(win, x,y,w,h, percent, fg,bg,hi,lo, str) + * void ProgressMeter(min, max, val, str); + * void xvbcopy(src, dst, length) * int xvbcmp (s1, s2, length) * void xvbzero(s, length) * char *xv_strstr(s1, s2) @@ -21646,7 +31635,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c #include "bits/fc_left" #include "bits/fc_leftm" #include "bits/fc_left1" -@@ -61,12 +67,12 @@ +@@ -61,21 +67,24 @@ /* the following fakes 'XSetWMProtocols(theDisp, win, &atom_DELWIN, 1);' */ @@ -21661,7 +31650,22 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c PropModeReplace, (unsigned char *) &atom_DELWIN, 1); } -@@ -91,9 +97,9 @@ + + /***************************************************/ + Window CreateWindow(name,clname,geom,defw,defh,fg,bg,usesize) +-char *name, *clname, *geom; +-int defw,defh,usesize; +-unsigned long fg, bg; ++ const char *name; ++ const char *clname; ++ const char *geom; ++ int defw,defh; ++ unsigned long fg, bg; ++ int usesize; + { + Window win; + XSetWindowAttributes xswa; +@@ -91,16 +100,24 @@ x = y = 1; i = XParseGeometry(geom,&x,&y, (unsigned int *) &w, (unsigned int *) &h); @@ -21673,7 +31677,25 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c if (!usesize || !(i&WidthValue)) w = defw; if (!usesize || !(i&HeightValue)) h = defh; -@@ -130,7 +136,7 @@ +- hints.flags |= USSize; ++ hints.flags |= USSize | PWinGravity; + +- if (i&XValue && i&XNegative) x = dispWIDE - w - abs(x); +- if (i&YValue && i&YNegative) y = dispHIGH - h - abs(y); ++ hints.win_gravity = NorthWestGravity; ++ if (i&XValue && i&XNegative) { ++ hints.win_gravity = NorthEastGravity; ++ x = dispWIDE - (w + 2 * bwidth) - abs(x); ++ } ++ if (i&YValue && i&YNegative) { ++ hints.win_gravity = (hints.win_gravity == NorthWestGravity) ? ++ SouthWestGravity : SouthEastGravity; ++ y = dispHIGH - (h + 2 * bwidth) - abs(y); ++ } + + + #define VROOT_TRANS +@@ -130,77 +147,76 @@ xswamask = CWBackPixel | CWBorderPixel | CWColormap; if (!usesize) xswamask |= CWBitGravity; @@ -21682,8 +31704,26 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c (u_int) bwidth, (int) dispDEEP, InputOutput, theVisual, xswamask, &xswa); if (!win) return(win); /* leave immediately if couldn't create */ -@@ -152,7 +158,7 @@ + +- XSetStandardProperties(theDisp, win, name, name, None, NULL, 0, &hints); +- + xwmh.input = True; + xwmh.flags = InputHint; + if (iconPix) { xwmh.icon_pixmap = iconPix; xwmh.flags |= IconPixmapHint; } +- XSetWMHints(theDisp, win, &xwmh); + + if (clname && strlen(clname)) { + classh.res_name = "xv"; +- classh.res_class = clname; +- XSetClassHint(theDisp, win, &classh); ++ classh.res_class = (char *) clname; + StoreDeleteWindowProp(win); + } + ++ XmbSetWMProperties(theDisp, win, name, name, NULL, 0, &hints, &xwmh, ++ clname ? &classh : NULL); ++ return(win); } - @@ -21691,7 +31731,14 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c /**************************************************/ -@@ -164,7 +170,7 @@ + void DrawString(win,x,y,str) +- Window win; +- int x,y; +- char *str; ++ Window win; ++ int x,y; ++ const char *str; + { XDrawString(theDisp, win, theGC, x, y, str, (int) strlen(str)); } @@ -21699,8 +31746,13 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c + /**************************************************/ void CenterString(win,x,y,str) - Window win; -@@ -174,7 +180,7 @@ +- Window win; +- int x,y; +- char *str; ++ Window win; ++ int x,y; ++ const char *str; + { DrawString(win, CENTERX(mfinfo, x, str), CENTERY(mfinfo, y), str); } @@ -21708,9 +31760,12 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c + /**************************************************/ void ULineString(win,x,y,str) - Window win; -@@ -182,11 +188,11 @@ - char *str; +- Window win; +- int x,y; +- char *str; ++ Window win; ++ int x,y; ++ const char *str; { DrawString(win, x, y, str); - XDrawLine(theDisp, win, theGC, x, y+DESCENT-1, @@ -21722,8 +31777,9 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c + /**************************************************/ int StringWidth(str) - char *str; -@@ -194,13 +200,13 @@ +- char *str; ++ const char *str; + { return(XTextWidth(mfinfo, str, (int) strlen(str))); } @@ -21739,28 +31795,49 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c given keypress is a cursor key. More complex than you'd think, since certain Sun Keyboards generate a variety of odd keycodes, and not all keyboards *have* all these keys. Note that 'shifted' arrow keys -@@ -225,16 +231,16 @@ +@@ -225,29 +241,29 @@ int i = CK_NONE; - if (ks==XK_Up || ks==XK_KP_Up || +- ks==XK_KP_8 || ks==XK_F28) i=CK_UP; + if (ks==XK_Up || ks==XK_KP_Up || - ks==XK_KP_8 || ks==XK_F28) i=CK_UP; ++ ks==XK_F28) i=CK_UP; - else if (ks==XK_Down || ks==XK_KP_Down || +- ks==XK_KP_2 || ks==XK_F34) i=CK_DOWN; + else if (ks==XK_Down || ks==XK_KP_Down || - ks==XK_KP_2 || ks==XK_F34) i=CK_DOWN; ++ ks==XK_F34) i=CK_DOWN; - else if (ks==XK_Left || ks==XK_KP_Left || +- ks==XK_KP_4 || ks==XK_F30) i=CK_LEFT; + else if (ks==XK_Left || ks==XK_KP_Left || - ks==XK_KP_4 || ks==XK_F30) i=CK_LEFT; ++ ks==XK_F30) i=CK_LEFT; - else if (ks==XK_Right || ks==XK_KP_Right || +- ks==XK_KP_6 || ks==XK_F32) i=CK_RIGHT; + else if (ks==XK_Right || ks==XK_KP_Right || - ks==XK_KP_6 || ks==XK_F32) i=CK_RIGHT; ++ ks==XK_F32) i=CK_RIGHT; else if (ks==XK_Prior || ks==XK_KP_Prior || -@@ -257,7 +263,7 @@ +- ks==XK_KP_9 || ks==XK_F29) i=CK_PAGEUP; ++ ks==XK_F29) i=CK_PAGEUP; + + else if (ks==XK_Next || ks==XK_KP_Next || +- ks==XK_KP_3 || ks==XK_F35) i=CK_PAGEDOWN; ++ ks==XK_F35) i=CK_PAGEDOWN; + + else if (ks==XK_Home || ks==XK_KP_Home || +- ks==XK_KP_7 || ks==XK_F27) i=CK_HOME; ++ ks==XK_F27) i=CK_HOME; + + else if (ks==XK_End || ks==XK_KP_End || +- ks==XK_KP_1 || ks==XK_F33) i=CK_END; ++ ks==XK_F33) i=CK_END; + + else i = CK_NONE; + +@@ -257,7 +273,7 @@ else if (i==CK_UP) i=CK_PAGEUP; else if (i==CK_DOWN) i=CK_PAGEDOWN; } @@ -21769,7 +31846,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c return i; } -@@ -334,9 +340,9 @@ +@@ -334,9 +350,9 @@ ev.window = win; ev.x = x; ev.y = y; ev.width = w; ev.height = h; ev.count = 0; @@ -21781,7 +31858,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c /***********************************/ -@@ -381,7 +387,7 @@ +@@ -381,7 +397,7 @@ u_int w, h; u_long bg; { @@ -21790,7 +31867,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c in the stipple pattern */ XSetFillStyle (theDisp, theGC, FillStippled); -@@ -400,7 +406,7 @@ +@@ -400,7 +416,7 @@ unsigned int w,h; unsigned long hi, lo, bg; { @@ -21799,7 +31876,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c x1 = x + (int) w; y1 = y + (int) h; -@@ -413,7 +419,7 @@ +@@ -413,7 +429,7 @@ XDrawLine(theDisp, win, theGC, x+i, y1-i, x+i, y+i); XDrawLine(theDisp, win, theGC, x+i, y+i, x1-i, y+i); } @@ -21808,7 +31885,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c /* draw bot-right */ XSetForeground(theDisp, theGC, (inout==R3D_OUT) ? lo : hi); -@@ -431,18 +437,18 @@ +@@ -431,18 +447,18 @@ } } } @@ -21831,7 +31908,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c cWIDE, cHIGH, cXOFF, cYOFF); else SetISTR(ISTR_CROP, "<none>"); } -@@ -469,7 +475,7 @@ +@@ -469,7 +485,7 @@ char *st; /* give 'em time to read message */ @@ -21840,7 +31917,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c else { st = GetISTR(ISTR_INFO); OpenAlert(st); -@@ -477,7 +483,7 @@ +@@ -477,11 +493,11 @@ CloseAlert(); } } @@ -21849,7 +31926,12 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c /***********************************/ void FatalError (identifier) -@@ -491,7 +497,7 @@ +- char *identifier; ++ const char *identifier; + { + fprintf(stderr, "%s: %s\n",cmd, identifier); + Quit(-1); +@@ -491,12 +507,17 @@ /***********************************/ void Quit(i) int i; @@ -21858,9 +31940,48 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c /* called when the program exits. frees everything explictly created EXCEPT allocated colors. This is used when 'useroot' is in operation, as we have to keep the alloc'd colors around, but we don't want anything -@@ -521,9 +527,9 @@ + else to stay */ + ++#ifdef AUTO_EXPAND ++ chdir(initdir); ++ Vdsettle(); ++#endif ++ + if (!theDisp) exit(i); /* called before connection opened */ + + if (useroot && i==0) { /* save the root info */ +@@ -516,14 +537,38 @@ + if (jpegW) XDestroyWindow(theDisp, jpegW); #endif ++#ifdef HAVE_JP2K ++ if (jp2kW) XDestroyWindow(theDisp, jp2kW); ++#endif ++ + #ifdef HAVE_TIFF + if (tiffW) XDestroyWindow(theDisp, tiffW); + #endif + ++#ifdef HAVE_PNG ++ if (pngW) XDestroyWindow(theDisp, pngW); ++#endif ++ ++#ifdef HAVE_PCD ++ if (pcdW) XDestroyWindow(theDisp, pcdW); ++#endif ++ ++#ifdef HAVE_PIC2 ++ if (pic2W) XDestroyWindow(theDisp, pic2W); ++#endif ++ ++#ifdef HAVE_MGCSFX ++ if (mgcsfxW) XDestroyWindow(theDisp, mgcsfxW); ++#endif ++ ++#ifdef HAVE_PNG ++ if (pngW) XDestroyWindow(theDisp, pngW); ++#endif ++ /* if NOT using stdcmap for images, free stdcmap */ - if (colorMapMode != CM_STDCMAP) { + if (colorMapMode != CM_STDCMAP) { @@ -21870,7 +31991,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c xvFreeColors(theDisp, theCmap, &stdfreecols[j], 1, 0L); } -@@ -543,13 +549,13 @@ +@@ -543,13 +588,13 @@ if (origlist[j][0] != '/') { /* relative path, prepend 'initdir' */ sprintf(str,"%s/%s", initdir, origlist[j]); if (unlink(str)) { @@ -21886,7 +32007,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c cmd, origlist[j], ERRSTR(errno)); } } -@@ -567,7 +573,7 @@ +@@ -567,7 +612,7 @@ void LoadFishCursors() { #define fc_w 16 @@ -21895,7 +32016,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c Pixmap flpix,flmpix,fmpix,fmmpix,frpix,frmpix; Pixmap fl1pix, fl1mpix, fr1pix, fr1mpix; -@@ -592,7 +598,7 @@ +@@ -592,7 +637,7 @@ fr1pix = XCreatePixmapFromBitmapData(theDisp, ctrlW, (char *) fc_right1_bits, fc_w, fc_h, 1L, 0L, 1); @@ -21904,7 +32025,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c (char *) fc_right1m_bits, fc_w, fc_h, 1L, 0L, 1); -@@ -613,7 +619,7 @@ +@@ -613,7 +658,7 @@ fr1curs= XCreatePixmapCursor(theDisp, fr1pix,fr1mpix,&fg, &bg, 8,8); frcurs = XCreatePixmapCursor(theDisp, frpix, frmpix, &fg, &bg, 8,8); @@ -21913,7 +32034,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c { flcurs = fmcurs = frcurs = (Cursor) NULL; } } -@@ -633,8 +639,8 @@ +@@ -633,8 +678,8 @@ time(&lastwaittime); waiting=1; xwmh.input = True; @@ -21924,7 +32045,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c xwmh.flags = (InputHint | IconPixmapHint | IconMaskHint) ; if (!useroot && mainW) XSetWMHints(theDisp, mainW, &xwmh); if ( useroot && ctrlW) XSetWMHints(theDisp, ctrlW, &xwmh); -@@ -665,8 +671,8 @@ +@@ -665,8 +710,8 @@ if (waiting) { waiting=0; xwmh.input = True; @@ -21935,7 +32056,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c xwmh.flags = (InputHint | IconPixmapHint | IconMaskHint) ; if (!useroot && mainW) XSetWMHints(theDisp, mainW, &xwmh); if ( useroot && ctrlW) XSetWMHints(theDisp, ctrlW, &xwmh); -@@ -694,11 +700,11 @@ +@@ -694,11 +739,11 @@ XFlush(theDisp); } @@ -21949,7 +32070,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c if (!useroot && mainW) XDefineCursor(theDisp, mainW, mainc); if (infoW) XDefineCursor(theDisp, infoW, otherc); if (ctrlW) XDefineCursor(theDisp, ctrlW, otherc); -@@ -708,11 +714,11 @@ +@@ -708,42 +753,63 @@ SetBrowseCursor(otherc); SetTextCursor(otherc); @@ -21960,28 +32081,77 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c #endif - + ++#ifdef HAVE_JP2K ++ if (jp2kW) XDefineCursor(theDisp, jp2kW, otherc); ++#endif ++ #ifdef HAVE_TIFF if (tiffW) XDefineCursor(theDisp, tiffW, otherc); #endif -@@ -725,7 +731,7 @@ ++ ++#ifdef HAVE_PNG ++ if (pngW) XDefineCursor(theDisp, pngW, otherc); ++#endif ++ ++#ifdef HAVE_PNG ++ if (pngW) XDefineCursor(theDisp, pngW, otherc); ++#endif ++ ++#ifdef HAVE_PCD ++ if (pcdW) XDefineCursor(theDisp, pcdW, otherc); ++#endif ++ ++#ifdef HAVE_PIC2 ++ if (pic2W) XDefineCursor(theDisp, pic2W, otherc); ++#endif ++ ++#ifdef HAVE_MGCSFX ++ if (mgcsfxW) XDefineCursor(theDisp, mgcsfxW, otherc); ++#endif + } + + + /***************************************************/ +-char *BaseName(fname) +- char *fname; ++const char *BaseName(fname) ++ const char *fname; { - char *basname; +- char *basname; ++ const char *basname; - /* given a complete path name ('/foo/bar/weenie.gif'), returns just the + /* given a complete path name ('/foo/bar/weenie.gif'), returns just the 'simple' name ('weenie.gif'). Note that it does not make a copy of the name, so don't be modifying it... */ -@@ -736,7 +742,7 @@ - return basname; +- basname = (char *) rindex(fname, '/'); +- if (!basname) basname = fname; +- else basname++; +- +- return basname; ++ basname = (const char *) rindex(fname, '/'); ++ return basname? basname+1 : fname; } - + /***************************************************/ void DrawTempGauge(win, x,y,w,h, ratio, fg,bg,hi,lo, str) - Window win; -@@ -773,14 +779,14 @@ +- Window win; +- int x,y,w,h; +- double ratio; +- u_long fg,bg,hi,lo; +- char *str; ++ Window win; ++ int x,y,w,h; ++ double ratio; ++ u_long fg,bg,hi,lo; ++ const char *str; + { + /* draws a 'temprature'-style horizontal progress meter in the specified + window, at the specified location */ +@@ -773,14 +839,14 @@ if (numchars) { /* do string */ if (barwide < maxwide) { XSetForeground(theDisp, theGC, bg); @@ -21999,7 +32169,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c CENTERY(mfinfo, (y+h/2)), str, numchars); XSetFunction(theDisp, theGC, GXcopy); -@@ -789,18 +795,18 @@ +@@ -789,18 +855,18 @@ else if (barwide < maxwide) { XDrawLine(theDisp,win,theGC,x+3+barwide, y+h/2 + 0, x+w-3, y+h/2 + 0); @@ -22024,7 +32194,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c (u_int) (maxwide-barwide),(u_int)((h-3) - (h/2+3)) + 1); } } -@@ -815,35 +821,35 @@ +@@ -815,44 +881,44 @@ if (numchars) { if (barwide < maxwide) { XSetForeground(theDisp, theGC, bg); @@ -22069,8 +32239,11 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c /***************************************************/ -@@ -852,7 +858,7 @@ - char *str; + void ProgressMeter(min, max, val, str) +- int min, max, val; +- char *str; ++ int min, max, val; ++ const char *str; { /* called during 'long' operations (algorithms, smoothing, etc.) to - give some indication that the program will ever finish. Draws a @@ -22078,7 +32251,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c temperature gauge in either mainW (if not useRoot), or ctrlW. Tries to be clever: only draws gauge if it looks like the operation is going to take more than a few seconds. Calling with val == max removes -@@ -887,7 +893,7 @@ +@@ -887,7 +953,7 @@ if (!waiting) { /* not waiting (or not waiting any longer) */ if (nowTime == lastTime && val<max) return; /* max one draw per second */ lastTime = nowTime; @@ -22087,7 +32260,26 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c infofg,infobg,hicol,locol,str); if (val >= max) { /* remove temp gauge */ -@@ -945,7 +951,7 @@ +@@ -915,7 +981,7 @@ + void XVCreatedFile(fullname) + char *fullname; + { +- /* called whenever a file has been deleted. Updates browser & dir windows, ++ /* called whenever a file has been created. Updates browser & dir windows, + if necessary */ + + BRCreatedFile(fullname); +@@ -925,7 +991,8 @@ + + /***************************************************/ + void xvbcopy(src, dst, len) +- char *src, *dst; ++ const char *src; ++ char *dst; + size_t len; + { + /* Modern OS's (Solaris, etc.) frown upon the use of bcopy(), +@@ -945,7 +1012,7 @@ */ if (src==dst || len<=0) return; /* nothin' to do */ @@ -22096,7 +32288,7 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c if (src<dst && src+len>dst) { /* do a backward copy */ src = src + len - 1; dst = dst + len - 1; -@@ -957,7 +963,7 @@ +@@ -957,11 +1024,11 @@ for ( ; len>0; len--, src++, dst++) *dst = *src; } } @@ -22105,25 +32297,42 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c /***************************************************/ int xvbcmp (s1, s2, len) -@@ -987,7 +993,7 @@ +- char *s1, *s2; ++ const char *s1, *s2; + size_t len; { - /* gets the current working directory. No trailing '/' */ + for ( ; len>0; len--, s1++, s2++) { +@@ -985,28 +1052,31 @@ + char *buf; + size_t buflen; + { +- /* gets the current working directory. No trailing '/' */ ++ /* Gets the current working directory and puts it in buf. No trailing '/'. */ - char *rv; -+ char *rv; ++ const char *rv; #ifdef USE_GETCWD - rv = (char *) getcwd(buf, buflen); -@@ -996,7 +1002,7 @@ +- rv = (char *) getcwd(buf, buflen); ++ rv = (const char *) getcwd(buf, buflen); + #else +- rv = (char *) getwd(buf); ++ rv = (const char *) getwd(buf); #endif if (!rv || strlen(rv)==0) { - if (((rv=(char *) getenv("PWD"))==NULL) && -+ if (((rv=(char *) getenv("PWD"))==NULL) && - ((rv=(char *) getenv("cwd"))==NULL)) rv = "./"; +- ((rv=(char *) getenv("cwd"))==NULL)) rv = "./"; ++ if (((rv=(const char *) getenv("PWD"))==NULL) && ++ ((rv=(const char *) getenv("cwd"))==NULL)) rv = "./"; strcpy(buf, rv); } -@@ -1006,7 +1012,7 @@ ++#ifdef AUTO_EXPAND ++ Vdtodir(buf); ++#endif + } + + /***************************************************/ @@ -22132,14 +32341,57 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c * Source code for the "strstr" library routine. * * Copyright 1988 Regents of the University of California -@@ -1066,6 +1072,22 @@ +@@ -1020,10 +1090,11 @@ + */ + + char *xv_strstr(string, substring) +- char *string; /* String to search. */ +- char *substring; /* Substring to try to find in string. */ ++ const char *string; /* String to search. */ ++ const char *substring; /* Substring to try to find in string. */ + { +- register char *a, *b; ++ const char *a; ++ const char *b; + + /* First scan quickly through the two strings looking for a + * single-character match. When it's found, then compare the +@@ -1031,14 +1102,14 @@ + */ + + b = substring; +- if (*b == 0) return string; ++ if (*b == 0) return (char *) string; + + for ( ; *string != 0; string += 1) { + if (*string != *b) continue; + + a = string; + while (1) { +- if (*b == 0) return string; ++ if (*b == 0) return (char *) string; + if (*a++ != *b++) break; + } + b = substring; +@@ -1052,7 +1123,8 @@ + + /***************************************************/ + FILE *xv_fopen(fname, mode) +- char *fname, *mode; ++ const char *fname; ++ const char *mode; + { + FILE *fp; + +@@ -1066,72 +1138,90 @@ } +/***************************************************/ +/* GRR 20050320: added actual mk[s]temp() call... */ +void xv_mktemp(buf, fname) -+ char *buf, *fname; ++ char *buf; ++ const char *fname; +{ +#ifndef VMS + sprintf(buf, "%s/%s", tmpdir, fname); @@ -22154,20 +32406,273 @@ diff -ruN xv-3.10a/xvmisc.c xv-3.10a-bugfixes/xvmisc.c +} - /*******/ -@@ -1124,7 +1146,7 @@ +-/*******/ ++/***************************************************/ + void Timer(msec) /* waits for 'n' milliseconds */ +- int msec; +-/*******/ ++ int msec; + { + long usec; + + if (msec <= 0) return; ++ + usec = (long) msec * 1000; + + +-#ifdef VMS ++#ifdef USLEEP ++ usleep(usec); ++ /* return */ ++#endif ++ ++ ++#if defined(VMS) && !defined(USLEEP) + { + float ftime; + ftime = msec / 1000.0; + lib$wait(&ftime); +- return; ++ /* return */ + } + #endif + + +-#ifdef sgi ++#if defined(sgi) && !defined(USLEEP) + { + float ticks_per_msec; + long ticks; + ticks_per_msec = (float) CLK_TCK / 1000.0; + ticks = (long) ((float) msec * ticks_per_msec); + sginap(ticks); +- return; ++ /* return */ + } + #endif + + +-#if defined(SVR4) || defined(sco) ++/* does SGI define SVR4? not sure... */ ++#if (defined(SVR4) || defined(sco)) && !defined(sgi) && !defined(USLEEP) + { + struct pollfd dummy; + poll(&dummy, 0, msec); +- return; ++ /* return */ + } + #endif + + +-#ifdef USLEEP +- usleep(usec); return; +-#endif +- +- +-#ifdef NOTIMER +- return; +-#endif +- +- +-#ifndef VMS ++#if !defined(USLEEP) && !defined(VMS) && !defined(sgi) && !defined(SVR4) && !defined(sco) && !defined(NOTIMER) { - /* default Timer() method now uses 'select()', which probably works - on all systems *anyhow* (except for VMS...) */ +- /* default Timer() method now uses 'select()', which probably works +- on all systems *anyhow* (except for VMS...) */ - ++ /* default/fall-through Timer() method now uses 'select()', which ++ * probably works on all systems *anyhow* (except for VMS...) */ + struct timeval time; time.tv_sec = usec / 1000000L; -diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c + time.tv_usec = usec % 1000000L; + select(0, XV_FDTYPE NULL, XV_FDTYPE NULL, XV_FDTYPE NULL, &time); ++ /* return */ + } +-#endif /* VMS */ +-} ++#endif + + ++ /* NOTIMER case, fallthroughs, etc. ... but we return void, so who cares */ ++ /* return */ ++} ++ +diff -ru xv-3.10a/xvpbm.c xv-3.10a-enhancements/xvpbm.c --- xv-3.10a/xvpbm.c 1995-01-03 13:23:44.000000000 -0800 -+++ xv-3.10a-bugfixes/xvpbm.c 2005-04-03 14:25:28.000000000 -0700 -@@ -115,7 +115,7 @@ ++++ xv-3.10a-enhancements/xvpbm.c 2007-05-13 17:44:03.000000000 -0700 +@@ -23,6 +23,15 @@ + */ + + ++typedef unsigned short ush; ++typedef unsigned char uch; ++ ++#define alpha_composite(composite, fg, alpha, bg) { \ ++ ush temp = ((ush)(fg)*(ush)(alpha) + \ ++ (ush)(bg)*(ush)(255 - (ush)(alpha)) + (ush)128); \ ++ (composite) = (uch)((temp + (temp >> 8)) >> 8); \ ++} ++ + #define TRUNCSTR "File appears to be truncated." + + static int garbage; +@@ -31,17 +40,91 @@ + static int loadpbm PARM((FILE *, PICINFO *, int)); + static int loadpgm PARM((FILE *, PICINFO *, int, int)); + static int loadppm PARM((FILE *, PICINFO *, int, int)); ++static int loadpam PARM((FILE *, PICINFO *, int, int)); + static int getint PARM((FILE *, PICINFO *)); + static int getbit PARM((FILE *, PICINFO *)); + static int getshort PARM((FILE *)); +-static int pbmError PARM((char *, char *)); ++static int pbmError PARM((const char *, const char *)); ++ ++static const char *bname; ++ ++ ++#ifdef HAVE_MGCSFX ++/* ++ * When file read or file write is fail, probably it's caused by ++ * reading from pipe which has no data yet, or writing to pipe ++ * which is not ready yet. ++ * Then we can use system call select() on descriptor of pipe and wait. ++ * If you want, change 'undef' to 'define' in the following line. ++ * This feature is performance-killer. ++ */ ++#undef FIX_PIPE_ERROR ++ ++#ifdef __osf__ ++# ifdef __alpha ++# define FIX_PIPE_ERROR ++# endif ++#endif ++ ++#endif /* HAVE_MGCSFX */ ++ ++ ++#ifdef FIX_PIPE_ERROR ++ ++int pipefdr; ++ ++struct timeval timeout; ++int width; ++fd_set fds; ++ ++static void ready_read() ++{ ++ if(pipefdr < 0) return; /* if file descriptor is not pipe, OK */ ++ WaitCursor(); + +-static char *bname; ++reselect: ++ /* setting of timeout */ ++ timeout.tv_sec = 1; /* 1 sec */ ++ timeout.tv_usec = 0; /* 0 usec */ ++ ++ FD_ZERO(&fds); /* clear bits */ ++ FD_SET(pipefdr, &fds); /* set bit of fd in fds */ ++ ++ /* number of file descriptor to want check (0 $B!A(B width-1) */ ++ width = pipefdr + 1; ++ ++ /* select returns number of file descriptors */ ++ if (select(width, &fds, NULL, NULL, &timeout) < 0){ ++ if(DEBUG){ ++ fprintf(stderr, "No file descriptors can't selected, waiting...\n"); ++ } ++ goto reselect; ++ } ++ ++ if (FD_ISSET(pipefdr, &fds)){ ++ /* Now, descriptor of pipe is ready to read */ ++ return; ++ }else{ ++ if(DEBUG){ ++ fprintf(stderr, "Can't read from pipe yet, waiting...\n"); ++ } ++ goto reselect; ++ } ++ ++} ++#endif /* FIX_PIPE_ERROR */ + + /*******************************************/ ++#ifdef HAVE_MGCSFX ++int LoadPBM(fname, pinfo, fd) ++ char *fname; ++ PICINFO *pinfo; ++ int fd; ++#else + int LoadPBM(fname, pinfo) + char *fname; + PICINFO *pinfo; ++#endif /* HAVE_MGCSFX */ + /*******************************************/ + { + /* returns '1' on success */ +@@ -50,6 +133,10 @@ + int c, c1; + int maxv, rv; + ++#ifdef FIX_PIPE_ERROR ++ pipefdr = fd; ++#endif ++ + garbage = maxv = rv = 0; + bname = BaseName(fname); + +@@ -57,6 +144,22 @@ + pinfo->comment = (char *) NULL; + + ++#ifdef HAVE_MGCSFX ++ if(fd < 0){ ++ /* open the file */ ++ fp = xv_fopen(fname,"r"); ++ if (!fp) return (pbmError(bname, "can't open file")); ++ ++ /* compute file length */ ++ fseek(fp, 0L, 2); ++ filesize = ftell(fp); ++ fseek(fp, 0L, 0); ++ }else{ ++ fp = fdopen(fd, "r"); ++ if (!fp) return (pbmError(bname, "can't open file")); ++ filesize = 0; /* dummy */ ++ } ++#else + /* open the file */ + fp = xv_fopen(fname,"r"); + if (!fp) return (pbmError(bname, "can't open file")); +@@ -65,6 +168,7 @@ + fseek(fp, 0L, 2); + filesize = ftell(fp); + fseek(fp, 0L, 0); ++#endif /* HAVE_MGCSFX */ + + + /* read the first two bytes of the file to determine which format +@@ -73,7 +177,8 @@ + "P6" = raw pixmap */ + + c = getc(fp); c1 = getc(fp); +- if (c!='P' || c1<'1' || c1>'6') return(pbmError(bname, "unknown format")); ++ if (c!='P' || c1<'1' || (c1>'6' && c1!='8')) /* GRR alpha */ ++ return(pbmError(bname, "unknown format")); + + /* read in header information */ + pinfo->w = getint(fp, pinfo); pinfo->h = getint(fp, pinfo); +@@ -104,6 +209,7 @@ + if (c1=='1' || c1=='4') rv = loadpbm(fp, pinfo, c1=='4' ? 1 : 0); + else if (c1=='2' || c1=='5') rv = loadpgm(fp, pinfo, c1=='5' ? 1 : 0, maxv); + else if (c1=='3' || c1=='6') rv = loadppm(fp, pinfo, c1=='6' ? 1 : 0, maxv); ++ else if (c1=='8') rv = loadpam(fp, pinfo, 1 , maxv); + + fclose(fp); + +@@ -115,7 +221,7 @@ } return rv; @@ -22176,7 +32681,7 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c -@@ -127,15 +127,21 @@ +@@ -127,15 +233,21 @@ { byte *pic8; byte *pix; @@ -22203,7 +32708,7 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c (raw) ? "raw" : "ascii", filesize); sprintf(pinfo->shrtInfo, "%dx%d PBM.", w, h); pinfo->colType = F_BWDITHER; -@@ -153,7 +159,7 @@ +@@ -153,7 +265,7 @@ for (j=0; j<w; j++, pix++) *pix = getbit(fp, pinfo); } @@ -22212,7 +32717,7 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c if (garbage) { return(pbmError(bname, "Garbage characters in image data.")); } -@@ -192,17 +198,23 @@ +@@ -192,17 +304,23 @@ int raw, maxv; { byte *pix, *pic8; @@ -22241,12 +32746,25 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c (raw) ? "raw" : "ascii", filesize); sprintf(pinfo->shrtInfo, "%dx%d PGM.", pinfo->w, pinfo->h); pinfo->colType = F_GREYSCALE; -@@ -236,11 +248,11 @@ +@@ -236,11 +354,24 @@ } } else { - numgot = fread(pic8, (size_t) 1, (size_t) w*h, fp); /* read raw data */ ++#ifdef FIX_PIPE_ERROR ++ reread: ++ numgot += fread(pic8 + numgot, (size_t) 1, (size_t) w*h - numgot, fp); /* read raw data */ ++ if(errno == EINTR){ ++ if(DEBUG){ ++ fprintf(stderr, ++ "Can't read all data from pipe, call select and waiting...\n"); ++ } ++ ready_read(); ++ goto reread; ++ } ++#else + numgot = fread(pic8, (size_t)1, (size_t)npixels, fp); /* read raw data */ ++#endif } } @@ -22255,7 +32773,7 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c if (garbage) { return (pbmError(bname, "Garbage characters in image data.")); -@@ -256,18 +268,24 @@ +@@ -256,18 +387,24 @@ PICINFO *pinfo; int raw, maxv; { @@ -22286,12 +32804,25 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c (raw) ? "raw" : "ascii", filesize); sprintf(pinfo->shrtInfo, "%dx%d PPM.", w, h); pinfo->colType = F_FULLCOLOR; -@@ -297,20 +315,20 @@ +@@ -297,20 +434,149 @@ } } else { - numgot = fread(pic24, (size_t) 1, (size_t) w*h*3, fp); /* read data */ ++#ifdef FIX_PIPE_ERROR ++ reread: ++ numgot += fread(pic24 + numgot, (size_t) 1, (size_t) w*h*3 - numgot, fp); /* read data */ ++ if(errno == EINTR){ ++ if(DEBUG){ ++ fprintf(stderr, ++ "Can't read all data from pipe, call select and waiting...\n"); ++ } ++ ready_read(); ++ goto reread; ++ } ++#else + numgot = fread(pic24, (size_t) 1, (size_t) bufsize, fp); /* read data */ ++#endif } } - @@ -22310,10 +32841,126 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c - if (maxv<255) { + if (maxv<255) { ++ for (i=0; i<=maxv; i++) scale[i] = (i * 255) / maxv; ++ ++ for (i=0, pix=pic24; i<h; i++) { ++ if ((i&0x3f)==0) WaitCursor(); ++ for (j=0; j<w*3; j++, pix++) *pix = scale[*pix]; ++ } ++ } ++ ++ return 1; ++} ++ ++ ++/*******************************************/ ++static int loadpam(fp, pinfo, raw, maxv) /* unofficial RGBA extension */ ++ FILE *fp; ++ PICINFO *pinfo; ++ int raw, maxv; ++{ ++ byte *p, *pix, *pic24, *linebuf, scale[256], bgR, bgG, bgB, r, g, b, a; ++ int i, j, bitshift, w, h, npixels, bufsize, linebufsize, holdmaxv; ++ ++ w = pinfo->w; ++ h = pinfo->h; ++ ++ npixels = w * h; ++ bufsize = 3*npixels; ++ linebufsize = 4*w; ++ if (w <= 0 || h <= 0 || npixels/w != h || bufsize/3 != npixels || ++ linebufsize/4 != w) ++ return pbmError(bname, "image dimensions too large"); ++ ++ /* allocate 24-bit image */ ++ pic24 = (byte *) calloc((size_t) bufsize, (size_t) 1); ++ if (!pic24) FatalError("couldn't malloc 'pic24' for PAM"); ++ ++ /* allocate line buffer for pre-composited RGBA data */ ++ linebuf = (byte *) malloc((size_t) linebufsize); ++ if (!linebuf) { ++ free(pic24); ++ FatalError("couldn't malloc 'linebuf' for PAM"); ++ } ++ ++ pinfo->pic = pic24; ++ pinfo->type = PIC24; ++ sprintf(pinfo->fullInfo, "PAM, %s format. (%ld bytes)", ++ (raw) ? "raw" : "ascii", filesize); ++ sprintf(pinfo->shrtInfo, "%dx%d PAM.", w, h); ++ pinfo->colType = F_FULLCOLOR; ++ ++ ++ /* if maxv>255, keep dropping bits until it's reasonable */ ++ holdmaxv = maxv; ++ bitshift = 0; ++ while (maxv>255) { maxv = maxv>>1; bitshift++; } ++ ++ ++ numgot = 0; ++ ++ if (!raw) { /* GRR: not alpha-ready */ ++ return pbmError(bname, "can't handle non-raw PAM image"); ++/* ++ for (i=0, pix=pic24; i<h; i++) { ++ if ((i&0x3f)==0) WaitCursor(); ++ for (j=0; j<w*3; j++, pix++) ++ *pix = (byte) (getint(fp, pinfo) >> bitshift); ++ } ++ */ ++ } ++ else { /* raw */ ++ if (holdmaxv>255) { /* GRR: not alpha-ready */ ++ return pbmError(bname, "can't handle PAM image with maxval > 255"); ++/* ++ for (i=0, pix=pic24; i<h; i++) { ++ if ((i&0x3f)==0) WaitCursor(); ++ for (j=0; j<w*3; j++,pix++) ++ *pix = (byte) (getshort(fp) >> bitshift); ++ } ++ */ ++ } ++ else { ++ if (have_imagebg) { /* GRR: alpha-ready */ ++ bgR = (imagebgR >> 8); ++ bgG = (imagebgG >> 8); ++ bgB = (imagebgB >> 8); ++ } else { ++ bgR = bgG = bgB = 0; ++ } ++ for (i=0, pix=pic24; i<h; i++) { ++ numgot += fread(linebuf, (size_t) 1, (size_t) linebufsize, fp); /* read data */ ++ if ((i&0x3f)==0) WaitCursor(); ++ for (j=0, p=linebuf; j<w; j++) { ++ r = *p++; ++ g = *p++; ++ b = *p++; ++ a = *p++; ++ alpha_composite(*pix++, r, a, bgR) ++ alpha_composite(*pix++, g, a, bgG) ++ alpha_composite(*pix++, b, a, bgB) ++ } ++ } ++ } ++ } ++ ++ free(linebuf); ++ ++ /* in principle this could overflow, but not critical */ ++ if (numgot != w*h*4) pbmError(bname, TRUNCSTR); ++ ++ if (garbage) ++ return(pbmError(bname, "Garbage characters in image data.")); ++ ++ ++ /* have to scale up all RGB values (Conv24to8 expects RGB values to ++ range from 0-255) */ ++ ++ if (maxv<255) { for (i=0; i<=maxv; i++) scale[i] = (i * 255) / maxv; for (i=0, pix=pic24; i<h; i++) { -@@ -360,8 +378,8 @@ +@@ -360,8 +626,8 @@ pinfo->comment[0] = '\0'; } else { @@ -22324,7 +32971,26 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c if (!tmpptr) FatalError("realloc failure in xvpbm.c getint"); pinfo->comment = tmpptr; } -@@ -445,8 +463,8 @@ +@@ -409,7 +675,18 @@ + + numgot++; + ++ /* Sometime after 1995, NetPBM's ppm(5) man page was changed to say, "Each ++ * sample is represented in pure binary by either 1 or 2 bytes. If the ++ * Maxval is less than 256, it is 1 byte. Otherwise, it is 2 bytes. The ++ * most significant byte is first." This change is incompatible with ++ * images created for viewing with all previous versions of XV, however, ++ * so both approaches are left available as a compile-time option. (Could ++ * make it runtime-selectable, too, but unclear whether anybody cares.) */ ++#ifdef ASSUME_RAW_PPM_LSB_FIRST /* legacy approach */ + return (c2 << 8) | c1; ++#else /* MSB first */ ++ return (c1 << 8) | c2; ++#endif + } + + +@@ -445,8 +722,8 @@ pinfo->comment[0] = '\0'; } else { @@ -22335,7 +33001,16 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c if (!tmpptr) FatalError("realloc failure in xvpbm.c getint"); pinfo->comment = tmpptr; } -@@ -490,7 +508,7 @@ +@@ -470,7 +747,7 @@ + + /*******************************************/ + static int pbmError(fname, st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; +@@ -490,7 +767,7 @@ char *comment; { /* writes a PBM/PGM/PPM file to the already open stream @@ -22344,7 +33019,7 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c 'colorstyle' single-handedly determines the type of file written if colorstyle==0, (Full Color) a PPM file is written if colorstyle==1, (Greyscale) a PGM file is written -@@ -546,7 +564,7 @@ +@@ -546,7 +823,7 @@ } } else { @@ -22353,7 +33028,7 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c fprintf(fp,"%3d %3d %3d ",rmap[*pix], gmap[*pix], bmap[*pix]); else fprintf(fp,"%3d %3d %3d ",pix[0], pix[1], pix[2]); -@@ -554,7 +572,7 @@ +@@ -554,7 +831,7 @@ len+=12; if (len>58) { fprintf(fp,"\n"); len=0; } } @@ -22362,7 +33037,16 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c pix += (ptype==PIC24) ? 3 : 1; } } -@@ -626,10 +644,3 @@ +@@ -584,7 +861,7 @@ + + else if (colorstyle==2) { /* 1-bit B/W stipple */ + int bit,k,flipbw; +- char *str0, *str1; ++ const char *str0, *str1; + + /* shouldn't happen */ + if (ptype == PIC24) FatalError("PIC24 and B/W Stipple in WritePBM()\n"); +@@ -626,10 +903,3 @@ return 0; } @@ -22373,10 +33057,10 @@ diff -ruN xv-3.10a/xvpbm.c xv-3.10a-bugfixes/xvpbm.c - - - -diff -ruN xv-3.10a/xvpcx.c xv-3.10a-bugfixes/xvpcx.c +diff -ru xv-3.10a/xvpcx.c xv-3.10a-enhancements/xvpcx.c --- xv-3.10a/xvpcx.c 1995-01-10 15:06:37.000000000 -0800 -+++ xv-3.10a-bugfixes/xvpcx.c 2005-03-25 08:10:03.000000000 -0800 -@@ -29,7 +29,7 @@ ++++ xv-3.10a-enhancements/xvpcx.c 2007-05-13 18:46:27.000000000 -0700 +@@ -29,17 +29,17 @@ #define PCX_YMAXH 11 /* hres (12,13) and vres (14,15) not used */ #define PCX_CMAP 16 /* start of 16*3 colormap data */ @@ -22385,17 +33069,31 @@ diff -ruN xv-3.10a/xvpcx.c xv-3.10a-bugfixes/xvpcx.c #define PCX_BPRL 66 #define PCX_BPRH 67 -@@ -51,8 +51,8 @@ + #define PCX_MAPSTART 0x0c /* Start of appended colormap */ + + +-static int pcxLoadImage8 PARM((char *, FILE *, PICINFO *, byte *)); +-static int pcxLoadImage24 PARM((char *, FILE *, PICINFO *, byte *)); ++static int pcxLoadImage8 PARM((const char *, FILE *, PICINFO *, byte *)); ++static int pcxLoadImage24 PARM((const char *, FILE *, PICINFO *, byte *)); + static void pcxLoadRaster PARM((FILE *, byte *, int, byte *, int, int)); +-static int pcxError PARM((char *, char *)); ++static int pcxError PARM((const char *, const char *)); + + + +@@ -51,9 +51,9 @@ { FILE *fp; long filesize; - char *bname, *errstr; - byte hdr[128], *image; -+ char *bname; + byte hdr[128]; int i, colors, gray, fullcolor; ++ const char *bname; pinfo->type = PIC8; + pinfo->pic = (byte *) NULL; @@ -64,7 +64,7 @@ /* open the stream */ fp = xv_fopen(fname,"r"); @@ -22444,7 +33142,14 @@ diff -ruN xv-3.10a/xvpcx.c xv-3.10a-bugfixes/xvpcx.c hdr[PCX_PLANES], (hdr[PCX_PLANES]==1) ? "" : "s", hdr[PCX_BPP], (hdr[PCX_BPP]==1) ? "" : "s", filesize); -@@ -218,15 +218,21 @@ +@@ -212,21 +212,27 @@ + + /*****************************/ + static int pcxLoadImage8(fname, fp, pinfo, hdr) +- char *fname; ++ const char *fname; + FILE *fp; + PICINFO *pinfo; byte *hdr; { /* load an image with at most 8 bits per pixel */ @@ -22472,7 +33177,14 @@ diff -ruN xv-3.10a/xvpcx.c xv-3.10a-bugfixes/xvpcx.c switch (hdr[PCX_BPP]) { case 1: pcxLoadRaster(fp, image, 1, hdr, pinfo->w, pinfo->h); break; case 8: pcxLoadRaster(fp, image, 8, hdr, pinfo->w, pinfo->h); break; -@@ -249,25 +255,33 @@ +@@ -243,31 +249,39 @@ + + /*****************************/ + static int pcxLoadImage24(fname, fp, pinfo, hdr) +- char *fname; ++ const char *fname; + FILE *fp; + PICINFO *pinfo; byte *hdr; { byte *pix, *pic24, scale[256]; @@ -22597,7 +33309,7 @@ diff -ruN xv-3.10a/xvpcx.c xv-3.10a-bugfixes/xvpcx.c if (plane >= (int) hdr[PCX_PLANES]) { /* moved to next row */ plane = 0; -@@ -367,13 +381,13 @@ +@@ -367,19 +381,19 @@ } else { /* next plane, same row */ image = oldimage; @@ -22613,9 +33325,16 @@ diff -ruN xv-3.10a/xvpcx.c xv-3.10a-bugfixes/xvpcx.c -diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c + /*******************************************/ + static int pcxError(fname,st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; +diff -ru xv-3.10a/xvpds.c xv-3.10a-enhancements/xvpds.c --- xv-3.10a/xvpds.c 1995-01-03 13:25:52.000000000 -0800 -+++ xv-3.10a-bugfixes/xvpds.c 2005-04-03 11:31:30.000000000 -0700 ++++ xv-3.10a-enhancements/xvpds.c 2007-05-12 14:08:47.000000000 -0700 @@ -22,23 +22,23 @@ Choice of algorithm for 16->8 bit conversion--linear or histogram stretch. (adds CONV24_HIST item in "24/8 bit" pull-down menu.) @@ -22665,7 +33384,17 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c * (301) 286-6695 * or call * (301) 286-9000 (300,1200,2400 bps) -@@ -91,10 +91,10 @@ +@@ -77,8 +77,7 @@ + * Huffman-encoded, and the encoding histogram follows the ASCII headers. + * To decode these, we use a slightly modified version of "vdcomp.c" from the + * NASA Viking CD-ROMS. For xv to work, you need to have vdcomp compiled +- * and in your search path. vdcomp.c should be included with this +-distribution. ++ * and in your search path. vdcomp.c should be included with this distribution. + * + * I've heard that newer discs have FITS images on them. If they do, support + * for them will be added when I get one. Until then, you can use fitstopgm. +@@ -91,10 +90,10 @@ * Copyright 1989, 1990 by Anthony A. Datri * * Permission to use, copy, and distribute for non-commercial purposes, @@ -22678,18 +33407,65 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c * In exception to the above, permission to John Bradley is hereby granted to * distribute this code as he sees fit within the context of his "xv" image * viewer. -@@ -132,8 +132,8 @@ +@@ -102,7 +101,7 @@ + * This software is provided "as is" without any express or implied warranty. + */ + +- ++#define NEEDSDIR /* for S_IRUSR|S_IWUSR */ + #include "xv.h" + + #ifdef HAVE_PDS +@@ -129,27 +128,32 @@ + + /* This is arbitrary. Everything I've seen so far fits in 50 chars */ + #define COMMENTSIZE 50 ++#define INOTESIZE 1000 static int lastwasinote = FALSE; -static char scanbuff [MAX_SIZE], - rtbuff [RTBUFFSIZE], -+static char scanbuff [MAX_SIZE], -+ rtbuff [RTBUFFSIZE], - inote [20*COMMENTSIZE], - infobuff [COMMENTSIZE], - spacecraft [COMMENTSIZE], -@@ -203,10 +203,10 @@ +- inote [20*COMMENTSIZE], +- infobuff [COMMENTSIZE], +- spacecraft [COMMENTSIZE], +- target [COMMENTSIZE], +- filtname [COMMENTSIZE], +- gainmode [COMMENTSIZE], +- editmode [COMMENTSIZE], +- scanmode [COMMENTSIZE], +- exposure [COMMENTSIZE], +- shuttermode [COMMENTSIZE], +- mphase [COMMENTSIZE], +- iname [COMMENTSIZE], +- itime [COMMENTSIZE], +- garbage [1020], ++static char scanbuff [MAX_SIZE+1], ++ rtbuff [RTBUFFSIZE+1], ++ inote [INOTESIZE+1], ++ infobuff [COMMENTSIZE+1], ++ spacecraft [COMMENTSIZE+1], ++ target [COMMENTSIZE+1], ++ filtname [COMMENTSIZE+1], ++ gainmode [COMMENTSIZE+1], ++ editmode [COMMENTSIZE+1], ++ scanmode [COMMENTSIZE+1], ++ exposure [COMMENTSIZE+1], ++ shuttermode [COMMENTSIZE+1], ++ mphase [COMMENTSIZE+1], ++ iname [COMMENTSIZE+1], ++ itime [COMMENTSIZE+1], ++ garbage [1024], + *tmptmp, + pdsuncompfname[FNAMESIZE]; ++ ++#define SSTR(l) "%" #l "s" ++#define S(l) SSTR(l) ++ + byte *image; + static int elaphe; + +@@ -203,10 +207,10 @@ } return(count); @@ -22703,7 +33479,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c default: count++; *bp++ = c; } } -@@ -242,7 +242,7 @@ +@@ -242,7 +246,7 @@ * disc seem to leave off the first two bytes. Sigh. This may sometimes be * a distinction between the fixed and variable-record files. */ @@ -22712,21 +33488,27 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c /*******************************************/ int LoadPDS(fname, pinfo) char *fname; -@@ -250,11 +250,11 @@ +@@ -250,13 +254,16 @@ { /* returns '1' on success, '0' on failure */ - int tempnum; + int tempnum, bytewidth, bufsize; ++#ifndef USE_MKSTEMP ++ int tmpfd; ++#endif FILE *zf; static int isfixed,teco,i,j,itype,vaxbyte, recsize,hrecsize,irecsize,isimage,labelrecs,labelsofar, - x,y,lpsize,lssize,samplesize,returnp,labelsize,yy; + w,h,lpsize,lssize,samplesize,returnp,labelsize,yy; char *tmp; - char *ftypstr; +- char *ftypstr; ++ const char *ftypstr; unsigned long filesize; -@@ -265,7 +265,7 @@ + char sampletype[64]; + +@@ -265,7 +272,7 @@ returnp = isimage = FALSE; itype = PDSTRASH; @@ -22735,7 +33517,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c lpsize = lssize = samplesize = labelsize = labelsofar = 0; (*pdsuncompfname) = (*iname) = (*target) = (*filtname) = (*garbage) = '\0'; -@@ -363,7 +363,7 @@ +@@ -363,7 +370,7 @@ * length indicator. If the length indicator is odd, then a pad byte * is appended to the end of the record so that all records contain * an even number of bytes." */ @@ -22744,7 +33526,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c i=getc(zf); j=getc(zf); if (j == EOF) { -@@ -371,7 +371,7 @@ +@@ -371,7 +378,7 @@ fclose(zf); return 0; } @@ -22753,7 +33535,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c teco = i + (j << 8); if (teco % 2) teco++; -@@ -380,7 +380,7 @@ +@@ -380,7 +387,7 @@ fclose(zf); return 0; } @@ -22762,7 +33544,25 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c scanbuff[teco]='\0'; } -@@ -429,11 +429,11 @@ +@@ -397,7 +404,7 @@ + + if (strcmp(scanbuff,"END") == 0) { + break; +- } else if (sscanf(scanbuff," RECORD_TYPE = %s",rtbuff) == 1) { ++ } else if (sscanf(scanbuff, " RECORD_TYPE = " S(RTBUFFSIZE), rtbuff) == 1) { + if (strncmp(rtbuff,"VARIABLE_LENGTH", (size_t) 15) == 0) { + /* itype=PDSVARIABLE; */ + } else if (strncmp(rtbuff,"FIXED_LENGTH", (size_t) 12) == 0) { +@@ -416,7 +423,7 @@ + if (irecsize == 0) irecsize=recsize; + lastwasinote=FALSE; + continue; +- } else if (sscanf(scanbuff," FILE_TYPE = %s", rtbuff) != 0) { ++ } else if (sscanf(scanbuff, " FILE_TYPE = " S(RTBUFFSIZE), rtbuff) != 0) { + lastwasinote=FALSE; + if (strncmp(rtbuff,"IMAGE", (size_t) 5) == 0) { + isimage=TRUE; +@@ -429,11 +436,11 @@ (sscanf(scanbuff," LABEL_RECORDS = %d", &labelrecs) == 1)) { lastwasinote=FALSE; continue; @@ -22777,16 +33577,123 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c isimage=TRUE; lastwasinote=FALSE; continue; } else if (sscanf(scanbuff," HEADER_RECORD_BYTES = %d",&hrecsize)==1) { lastwasinote=FALSE; continue; -@@ -472,7 +472,7 @@ +@@ -445,74 +452,74 @@ + lastwasinote=FALSE; continue; + } else if (sscanf(scanbuff," SAMPLE_BITS = %d", &samplesize) == 1) { + lastwasinote=FALSE; continue; +- } else if (sscanf(scanbuff," SAMPLE_TYPE = %s", sampletype) == 1) { ++ } else if (sscanf(scanbuff, " SAMPLE_TYPE = " S(64), sampletype) == 1) { + lastwasinote=FALSE; continue; +- } else if (sscanf(scanbuff," SPACECRAFT_NAME = %s %s", ++ } else if (sscanf(scanbuff," SPACECRAFT_NAME = " S(COMMENTSIZE) " " S(1023), + spacecraft,garbage) == 2 ) { +- strcat(spacecraft,xv_strstr(scanbuff, spacecraft)+strlen(spacecraft)); ++ const char *tmp = xv_strstr(scanbuff, spacecraft) + strlen(spacecraft); ++ strncat(spacecraft, tmp, COMMENTSIZE - strlen(spacecraft)); + lastwasinote=FALSE; continue; +- } else if (sscanf(scanbuff," SPACECRAFT_NAME = %s", spacecraft) == 1) { ++ } else if (sscanf(scanbuff, " SPACECRAFT_NAME = " S(COMMENTSIZE), spacecraft) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," TARGET_NAME = %s", target) == 1) { ++ } else if (sscanf(scanbuff, " TARGET_NAME = " S(COMMENTSIZE), target) == 1) { + lastwasinote=FALSE; continue; +- } else if (sscanf(scanbuff," TARGET_BODY = %s", target) == 1) { ++ } else if (sscanf(scanbuff, " TARGET_BODY = " S(COMMENTSIZE), target) == 1) { + lastwasinote=FALSE; continue; - } else if (sscanf(scanbuff," INSTRUMENT_GAIN_STATE = %s",gainmode)==1) { +- } else if (sscanf(scanbuff," MISSION_PHASE_NAME = %s", mphase) == 1) { ++ } else if (sscanf(scanbuff, " MISSION_PHASE_NAME = " S(COMMENTSIZE), mphase) == 1) { + lastwasinote=FALSE; continue; +- } else if (sscanf(scanbuff," MISSION_PHASE = %s", mphase) == 1) { ++ } else if (sscanf(scanbuff, " MISSION_PHASE = " S(COMMENTSIZE), mphase) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," INSTRUMENT_NAME = %s", iname) == 1) { ++ } else if (sscanf(scanbuff, " INSTRUMENT_NAME = " S(COMMENTSIZE), iname) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," GAIN_MODE_ID = %s", gainmode) == 1) { ++ } else if (sscanf(scanbuff, " GAIN_MODE_ID = " S(COMMENTSIZE), gainmode) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," INSTRUMENT_GAIN_STATE = %s",gainmode)==1) { ++ } else if (sscanf(scanbuff, " INSTRUMENT_GAIN_STATE = " S(COMMENTSIZE), gainmode) ==1 ) { lastwasinote=FALSE; continue; - +- } else if (sscanf(scanbuff," EDIT_MODE_ID = %s", editmode) == 1) { + - } else if (sscanf(scanbuff," EDIT_MODE_ID = %s", editmode) == 1) { ++ } else if (sscanf(scanbuff, " EDIT_MODE_ID = " S(COMMENTSIZE), editmode) == 1) { lastwasinote=FALSE; continue; -@@ -531,11 +531,11 @@ +- } else if (sscanf(scanbuff," INSTRUMENT_EDIT_MODE = %s", editmode)==1) { ++ } else if (sscanf(scanbuff, " INSTRUMENT_EDIT_MODE = " S(COMMENTSIZE), editmode) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," SCAN_MODE_ID = %s", scanmode) == 1) { ++ } else if (sscanf(scanbuff, " SCAN_MODE_ID = " S(COMMENTSIZE), scanmode) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," INSTRUMENT_SCAN_RATE = %s", scanmode)==1) { ++ } else if (sscanf(scanbuff, " INSTRUMENT_SCAN_RATE = " S(COMMENTSIZE), scanmode) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," SHUTTER_MODE_ID = %s", shuttermode) == 1) { ++ } else if (sscanf(scanbuff, " SHUTTER_MODE_ID = " S(COMMENTSIZE), shuttermode) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," INSTRUMENT_SHUTTER_MODE = %s", +- shuttermode) == 1) { ++ } else if (sscanf(scanbuff, " INSTRUMENT_SHUTTER_MODE = " S(COMMENTSIZE), shuttermode) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," SCAN_MODE_ID = %s", scanmode) == 1) { ++ } else if (sscanf(scanbuff, " SCAN_MODE_ID = " S(COMMENTSIZE), scanmode) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," INSTRUMENT_SCAN_RATE = %s", scanmode)==1) { ++ } else if (sscanf(scanbuff, " INSTRUMENT_SCAN_RATE = " S(COMMENTSIZE), scanmode) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," SPACECRAFT_EVENT_TIME = %s", itime) == 1) { ++ } else if (sscanf(scanbuff, " SPACECRAFT_EVENT_TIME = " S(COMMENTSIZE), itime) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," IMAGE_TIME = %s", itime) == 1) { ++ } else if (sscanf(scanbuff, " IMAGE_TIME = " S(COMMENTSIZE), itime) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," FILTER_NAME = %s", filtname) == 1) { ++ } else if (sscanf(scanbuff, " FILTER_NAME = " S(COMMENTSIZE), filtname) == 1) { + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff," INSTRUMENT_FILTER_NAME = %s",filtname)==1) { ++ } else if (sscanf(scanbuff, " INSTRUMENT_FILTER_NAME = " S(COMMENTSIZE), filtname) == 1) { + lastwasinote=FALSE; continue; + +- } else if ((sscanf(scanbuff," EXPOSURE_DURATION = %s", exposure) == 1) +- || (sscanf(scanbuff," INSTRUMENT_EXPOSURE_DURATION = %s", +- exposure) == 1)) { ++ } else if ((sscanf(scanbuff, " EXPOSURE_DURATION = " S(COMMENTSIZE), exposure) == 1) ++ || (sscanf(scanbuff, " INSTRUMENT_EXPOSURE_DURATION = " S(COMMENTSIZE), ++ exposure)) == 1) { + tmptmp = (char *) index(scanbuff,'='); + tmptmp++; + while((*tmptmp) == ' ') +@@ -520,10 +527,10 @@ + strcpy(exposure,tmptmp); + lastwasinote=FALSE; continue; + +- } else if (sscanf(scanbuff, "NOTE = %s", inote) == 1) { ++ } else if (sscanf(scanbuff, "NOTE = " S(INOTESIZE), inote) == 1) { + tmptmp = (char *) index(scanbuff,'='); tmptmp++; + while (((*tmptmp) == ' ') || ((*tmptmp) == '"')) tmptmp++; +- strcpy(inote,tmptmp); ++ strncpy(inote, tmptmp, INOTESIZE - 1); + strcat(inote," "); + + /* evil and somewhat risky: A "note" (really, any textual +@@ -531,11 +538,11 @@ * get my hands on the clown who designed this format... * What we basically assume here * is that a NOTE record that doesn't end with a " is @@ -22800,7 +33707,16 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c * flag in each of the above record types for potential * error recovery, although it really breaks up the beauty * of the cascading sscanfs. Dykstra'd love me for this one */ -@@ -568,10 +568,10 @@ +@@ -548,7 +555,7 @@ + } else if (lastwasinote) { + tmptmp=scanbuff; + while (((*tmptmp) == ' ') || ((*tmptmp) == '"')) tmptmp++; +- strcat(inote,tmptmp); ++ strncat(inote, tmptmp, INOTESIZE - strlen(inote) - 1); + strcat(inote," "); + if (index(tmptmp,'"') != NULL) + lastwasinote=FALSE; +@@ -568,10 +575,10 @@ fclose(zf); return 0; } @@ -22813,7 +33729,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c } else if (itype == VICAR) { /* we've got a VICAR file. Let's find out how big the puppy is */ ungetc(' ', zf); -@@ -582,8 +582,8 @@ +@@ -582,8 +589,8 @@ SetISTR(ISTR_WARNING,"LoadPDS: bad NL in VICAR\n"); returnp=TRUE; } @@ -22824,7 +33740,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c SetISTR(ISTR_WARNING,"LoadPDS: bad scan NL in VICAR\n"); returnp=TRUE; } -@@ -593,7 +593,7 @@ +@@ -593,7 +600,7 @@ returnp=TRUE; } @@ -22833,7 +33749,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c SetISTR(ISTR_WARNING,"LoadPDS: bad scan NS in VICAR\n"); returnp=TRUE; } -@@ -625,6 +625,13 @@ +@@ -625,6 +632,13 @@ returnp=TRUE; } @@ -22847,12 +33763,51 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c if (returnp) { fclose(zf); return 0; -@@ -689,11 +696,19 @@ +@@ -640,27 +654,27 @@ + + *infobuff='\0'; + if (*spacecraft) { +- strcat(infobuff,spacecraft); ++ strncat(infobuff, spacecraft, sizeof(infobuff) - 1); + } + + if (*target) { +- strcat(infobuff,", "); +- strcat(infobuff,target); ++ strncat(infobuff, ", ", sizeof(infobuff) - strlen(infobuff) - 1); ++ strncat(infobuff, target, sizeof(infobuff) - strlen(infobuff) - 1); + } + + if (*filtname) { +- strcat(infobuff,", "); +- strcat(infobuff,filtname); ++ strncat(infobuff, ", ", sizeof(infobuff) - strlen(infobuff) - 1); ++ strncat(infobuff, filtname, sizeof(infobuff) - strlen(infobuff) - 1); + } + + if (*itime) { +- strcat(infobuff,", "); +- strcat(infobuff,itime); ++ strncat(infobuff, ", ", sizeof(infobuff) - strlen(infobuff) - 1); ++ strncat(infobuff, itime, sizeof(infobuff) - strlen(infobuff) - 1); + } + +- SetISTR(ISTR_WARNING,infobuff); ++ SetISTR(ISTR_WARNING, "%s", infobuff); + +- strcpy(pdsuncompfname,fname); ++ strncpy(pdsuncompfname,fname,sizeof(pdsuncompfname) - 1); + ftypstr = ""; + + switch (itype) { +@@ -688,12 +702,26 @@ + fclose(zf); #ifndef VMS - sprintf(pdsuncompfname,"%s/xvhuffXXXXXX", tmpdir); +- sprintf(pdsuncompfname,"%s/xvhuffXXXXXX", tmpdir); - mktemp(pdsuncompfname); - sprintf(scanbuff,"%s %s - 4 >%s",PDSUNCOMP,fname,pdsuncompfname); ++ snprintf(pdsuncompfname, sizeof(pdsuncompfname) - 1, "%s/xvhuffXXXXXX", tmpdir); #else strcpy(pdsuncompfname,"sys$disk:[]xvhuffXXXXXX"); +#endif @@ -22861,15 +33816,21 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c + close(mkstemp(pdsuncompfname)); +#else mktemp(pdsuncompfname); ++ tmpfd = open(pdsuncompfname,O_WRONLY|O_CREAT|O_EXCL,S_IRWUSR); ++ if (tmpfd < 0) { ++ SetISTR(ISTR_WARNING,"Unable to create temporary file."); ++ return 0; ++ } ++ close(tmpfd); +#endif + +#ifndef VMS -+ sprintf(scanbuff,"%s %s - 4 >%s",PDSUNCOMP,fname,pdsuncompfname); ++ sprintf(scanbuff,"%s '%s' - 4 > %s", PDSUNCOMP, fname, pdsuncompfname); +#else sprintf(scanbuff,"%s %s %s 4",PDSUNCOMP,fname,pdsuncompfname); #endif -@@ -727,63 +742,72 @@ +@@ -727,63 +755,72 @@ fread(scanbuff, (size_t) labelsize, (size_t) 1, zf); } @@ -22959,40 +33920,56 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c if (samplesize == 16) if (Convert16BitImage(fname, pinfo, -@@ -798,25 +822,25 @@ +@@ -798,27 +835,27 @@ if (pinfo->comment) { char tmp[256]; *(pinfo->comment) = '\0'; - -+ - sprintf(tmp, "Spacecraft: %-28sTarget: %-32s\n", spacecraft, target); - strcat(pinfo->comment, tmp); +- sprintf(tmp, "Spacecraft: %-28sTarget: %-32s\n", spacecraft, target); +- strcat(pinfo->comment, tmp); - -+ - sprintf(tmp, "Filter: %-32sMission phase: %-24s\n", filtname, mphase); - strcat(pinfo->comment, tmp); +- sprintf(tmp, "Filter: %-32sMission phase: %-24s\n", filtname, mphase); +- strcat(pinfo->comment, tmp); - -+ - sprintf(tmp, "Image time: %-28sGain mode: %-29s\n", itime, gainmode); - strcat(pinfo->comment, tmp); +- sprintf(tmp, "Image time: %-28sGain mode: %-29s\n", itime, gainmode); +- strcat(pinfo->comment, tmp); - -+ - sprintf(tmp, "Edit mode: %-29sScan mode: %-29s\n", editmode, scanmode); - strcat(pinfo->comment, tmp); +- sprintf(tmp, "Edit mode: %-29sScan mode: %-29s\n", editmode, scanmode); +- strcat(pinfo->comment, tmp); - -+ - sprintf(tmp, "Exposure: %-30sShutter mode: %-25s\n", exposure,shuttermode); - strcat(pinfo->comment, tmp); +- sprintf(tmp, "Exposure: %-30sShutter mode: %-25s\n", exposure,shuttermode); +- strcat(pinfo->comment, tmp); - -+ - sprintf(tmp, "Instrument: %-28sImage time: %-28s\n", iname, itime); - strcat(pinfo->comment, tmp); +- sprintf(tmp, "Instrument: %-28sImage time: %-28s\n", iname, itime); +- strcat(pinfo->comment, tmp); - +- sprintf(tmp, "Image Note: %-28s", inote); +- strcat(pinfo->comment, tmp); ++ ++ sprintf(tmp, "Spacecraft: %-28.28sTarget: %-32.32s\n", spacecraft, target); ++ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); ++ ++ sprintf(tmp, "Filter: %-32.32sMission phase: %-24.24s\n", filtname, mphase); ++ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); ++ ++ sprintf(tmp, "Image time: %-28.28sGain mode: %-29.29s\n", itime, gainmode); ++ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); ++ ++ sprintf(tmp, "Edit mode: %-29.29sScan mode: %-29.29s\n", editmode, scanmode); ++ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); ++ ++ sprintf(tmp, "Exposure: %-30.30sShutter mode: %-25.25s\n", exposure,shuttermode); ++ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); ++ ++ sprintf(tmp, "Instrument: %-28.28sImage time: %-28.28s\n", iname, itime); ++ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); + - sprintf(tmp, "Image Note: %-28s", inote); - strcat(pinfo->comment, tmp); ++ sprintf(tmp, "Image Note: %-28.28s", inote); ++ strncat(pinfo->comment, tmp, 2000 - strlen(pinfo->comment) - 1); } -@@ -868,23 +892,20 @@ + + if (LoadPDSPalette(fname, pinfo)) return 1; +@@ -868,23 +905,20 @@ m = 65536 * sizeof(byte); lut = (byte *) malloc(m); if (lut == NULL) { @@ -23019,7 +33996,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c (c = (char *) rindex(fname, ':')) ? c+1 : fname), ']'); #else -@@ -947,14 +968,20 @@ +@@ -947,14 +981,20 @@ } } @@ -23043,7 +34020,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c } /* convert the 16-bit image to 8-bit */ -@@ -979,16 +1006,16 @@ +@@ -979,16 +1019,16 @@ FILE *fp; char name[1024], buf[256], *c; int i, n, r, g, b; @@ -23063,7 +34040,7 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c if ((fp = xv_fopen(name, "r")) == NULL) return 0; for (i = 0; i < 256; i++) { -@@ -1014,7 +1041,3 @@ +@@ -1014,7 +1054,3 @@ #endif /* HAVE_PDS */ @@ -23071,9 +34048,9 @@ diff -ruN xv-3.10a/xvpds.c xv-3.10a-bugfixes/xvpds.c - - - -diff -ruN xv-3.10a/xvpictoppm.c xv-3.10a-bugfixes/xvpictoppm.c +diff -ru xv-3.10a/xvpictoppm.c xv-3.10a-enhancements/xvpictoppm.c --- xv-3.10a/xvpictoppm.c 1995-01-13 11:57:14.000000000 -0800 -+++ xv-3.10a-bugfixes/xvpictoppm.c 2005-04-10 09:36:04.000000000 -0700 ++++ xv-3.10a-enhancements/xvpictoppm.c 2005-04-10 09:36:04.000000000 -0700 @@ -77,7 +77,7 @@ FILE *fp; byte *icon8, *pic24, *ip, *pp; @@ -23151,18 +34128,32 @@ diff -ruN xv-3.10a/xvpictoppm.c xv-3.10a-bugfixes/xvpictoppm.c - - - -diff -ruN xv-3.10a/xvpm.c xv-3.10a-bugfixes/xvpm.c +diff -ru xv-3.10a/xvpm.c xv-3.10a-enhancements/xvpm.c --- xv-3.10a/xvpm.c 1994-12-22 14:34:40.000000000 -0800 -+++ xv-3.10a-bugfixes/xvpm.c 2005-03-29 08:30:12.000000000 -0800 -@@ -60,7 +60,7 @@ ++++ xv-3.10a-enhancements/xvpm.c 2007-05-13 17:34:04.000000000 -0700 +@@ -42,9 +42,9 @@ + /***** end PM.H *****/ + + +-pmpic thePic; ++static pmpic thePic; + +-static int pmError PARM((char *, char *)); ++static int pmError PARM((const char *, const char *)); + static int flip4 PARM((int)); + static int getint32 PARM((FILE *)); + static void putint32 PARM((int, FILE *)); +@@ -60,8 +60,8 @@ FILE *fp; byte *pic8; - int isize,i,flipit,w,h; +- char *bname; + int isize,i,flipit,w,h,npixels,nRGBbytes; - char *bname; ++ const char *bname; bname = BaseName(fname); + thePic.pm_image = (char *) NULL; @@ -103,10 +103,11 @@ thePic.pm_cmtsize = flip4(thePic.pm_cmtsize); } @@ -23257,7 +34248,7 @@ diff -ruN xv-3.10a/xvpm.c xv-3.10a-bugfixes/xvpm.c pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; /* build mono cmap */ pinfo->pic = pic8; -@@ -228,10 +236,10 @@ +@@ -228,13 +236,13 @@ pinfo->normw = pinfo->w; pinfo->normh = pinfo->h; pinfo->frmType = F_PM; @@ -23270,7 +34261,11 @@ diff -ruN xv-3.10a/xvpm.c xv-3.10a-bugfixes/xvpm.c + (thePic.pm_form==PM_I || thePic.pm_np>1) ? "24-bit color" : "8-bit greyscale", thePic.pm_np, (thePic.pm_form==PM_I) ? "PM_I" : "PM_C", - isize + PM_IOHDR_SIZE + thePic.pm_cmtsize); +- isize + PM_IOHDR_SIZE + thePic.pm_cmtsize); ++ isize + (int)PM_IOHDR_SIZE + thePic.pm_cmtsize); + + sprintf(pinfo->shrtInfo, "%dx%d PM.", w,h); + pinfo->comment = thePic.pm_cmt; @@ -313,7 +321,7 @@ else if (colorstyle == 1) { /* GreyScale: 8 bits per pixel */ @@ -23280,9 +34275,18 @@ diff -ruN xv-3.10a/xvpm.c xv-3.10a-bugfixes/xvpm.c if (ptype == PIC8) { for (i=0; i<numcols; i++) rgb[i] = MONO(rmap[i],gmap[i],bmap[i]); for (i=0, p=pic; i<w*h; i++, p++) { -diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c +@@ -351,7 +359,7 @@ + + /*****************************/ + static int pmError(fname, st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + if (thePic.pm_image != NULL) free(thePic.pm_image); +diff -ru xv-3.10a/xvpopup.c xv-3.10a-enhancements/xvpopup.c --- xv-3.10a/xvpopup.c 1995-01-19 10:09:31.000000000 -0800 -+++ xv-3.10a-bugfixes/xvpopup.c 2004-05-16 18:04:13.000000000 -0700 ++++ xv-3.10a-enhancements/xvpopup.c 2007-04-15 15:02:32.000000000 -0700 @@ -1,5 +1,5 @@ -/* - * xvpopup.c - popup "Are you sure? Yes/No/Maybe" sort of dialog box @@ -23291,7 +34295,14 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c * * callable functions: * -@@ -20,7 +20,8 @@ +@@ -13,16 +13,16 @@ + * OpenAlert(str) - maps a button-less window + * CloseAlert() - closes a button-less window + * PUCheckEvent(event) - called by event handler +- * TextRect() - draws semi-complex strings in a rectangle + */ + + #include "copyright.h" #include "xv.h" @@ -23299,31 +34310,156 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c +#define OMIT_ICON_BITS +#include "bits/icon" /* icon_bits[] not used, but icon_width/height are */ - #define PUWIDE 400 +-#define PUWIDE 400 ++#define PUWIDE 480 #define PUHIGH 170 -@@ -86,8 +87,8 @@ - static char *padMthdNames[] = { "Solid Fill", "Run 'bggen'", "Load Image" }; - static int padColDefLen = 9; --static char *padColDefNames[] = { "black", "red", "yellow", "green", -- "cyan", "blue", "magenta", "white", -+static char *padColDefNames[] = { "black", "red", "yellow", "green", -+ "cyan", "blue", "magenta", "white", - "50% gray" }; + #define PAD_PUWIDE 480 +@@ -30,8 +30,9 @@ + + #define BUTTH 24 + +-static int doPopUp PARM((char *, char **, int, int, char *)); ++static int doPopUp PARM((const char *, const char **, int, int, const char *)); + static void attachPUD PARM((void)); ++static void TextRect PARM((Window, const char *, int, int, int, int, u_long)); + static void createPUD PARM((void)); + static void drawPUD PARM((int, int, int, int)); + static void drawPadOMStr PARM((void)); +@@ -41,8 +42,8 @@ + static void changedGSBuf PARM((void)); + static void drawGSBuf PARM((void)); + static void buildPadLists PARM((void)); +-static void build1PadList PARM((char *, char **, char **, int *, +- char **, char **, int)); ++static void build1PadList PARM((const char *, const char **, const char **, int *, ++ const char **, const char **, int)); + - static char *padColDefVals[] = { "black", "red", "yellow", "green", -@@ -105,8 +106,8 @@ - "Red Balls", - "Red+Yellow Diamonds" }; + /* values 'popUp' can take */ +@@ -57,20 +58,21 @@ + #define HIDESTR "Hide XV windows" + /* local variables */ +-Window popW; +-int nbts, selected, popUp=0, firsttime=1; +-int puwide = PUWIDE; +-int puhigh = PUHIGH; +-BUTT *bts; +-char *text; +-char accel[8]; +- +-char *gsBuf, *gsFilter; /* stuff needed for GetStrPopUp() handling */ +-int gsBufLen, gsAllow, gsCurPos, gsStPos, gsEnPos; +-int gsx, gsy, gsw, gsh; ++static Window popW; ++static int nbts, selected, popUp=0, firsttime=1; ++static int puwide = PUWIDE; ++static int puhigh = PUHIGH; ++static BUTT *bts; ++static const char *text; ++static char accel[8]; ++ ++static char *gsBuf; /* stuff needed for GetStrPopUp() handling */ ++static const char *gsFilter; ++static int gsBufLen, gsAllow, gsCurPos, gsStPos, gsEnPos; ++static int gsx, gsy, gsw, gsh; + + /* stuff for GrabPopUp */ +-CBUTT ahideCB; ++static CBUTT ahideCB; + + + /*** stuff for PadPopUp ***/ +@@ -82,48 +84,51 @@ + static int padMode, padOMode; + static DIAL padWDial, padHDial, padODial; + +-static int padMthdLen=3; +-static char *padMthdNames[] = { "Solid Fill", "Run 'bggen'", "Load Image" }; ++static int padMthdLen=3; ++static const char *padMthdNames[] = { "Solid Fill", "Run 'bggen'", "Load Image" }; + +-static int padColDefLen = 9; +-static char *padColDefNames[] = { "black", "red", "yellow", "green", +- "cyan", "blue", "magenta", "white", +- "50% gray" }; +- +-static char *padColDefVals[] = { "black", "red", "yellow", "green", +- "cyan", "blue", "magenta", "white", +- "gray50" }; +- +-static int padBgDefLen = 8; +-static char *padBgDefNames[] = { +- "Black->White", +- "Blue Gradient", +- "RGB Rainbow", +- "Full Rainbow", +- "Color Assortment", +- "Green Tiles", +- "Red Balls", +- "Red+Yellow Diamonds" }; +- -static char *padBgDefVals[] = { - "black white", -+static char *padBgDefVals[] = { -+ "black white", - "100 100 255 50 50 150", - "red green blue", - "black red yellow green blue purple black", -@@ -150,11 +151,11 @@ +- "100 100 255 50 50 150", +- "red green blue", +- "black red yellow green blue purple black", +- "black white red black yellow white green black cyan white blue black magenta white red yellow green cyan blue magenta red", +- "green black -r 30 -G 32x32", +- "red black -r 45 -G 32x32", +- "red yellow -r 45 -G 32x32" }; ++static int padColDefLen = 9; ++static const char *padColDefNames[] = { "black", "red", "yellow", "green", ++ "cyan", "blue", "magenta", "white", ++ "50% gray" }; ++ ++static const char *padColDefVals[] = { "black", "red", "yellow", "green", ++ "cyan", "blue", "magenta", "white", ++ "gray50" }; ++ ++static int padBgDefLen = 8; ++static const char *padBgDefNames[] = { "Black->White", ++ "Blue Gradient", ++ "RGB Rainbow", ++ "Full Rainbow", ++ "Color Assortment", ++ "Green Tiles", ++ "Red Balls", ++ "Red+Yellow Diamonds" }; ++ ++static const char *padBgDefVals[] = { "black white", ++ "100 100 255 50 50 150", ++ "red green blue", ++ "black red yellow green blue purple black", ++ "black white red black yellow white green black cyan white blue black magenta white red yellow green cyan blue magenta red", ++ "green black -r 30 -G 32x32", ++ "red black -r 45 -G 32x32", ++ "red yellow -r 45 -G 32x32" }; + + + /* this should match with PAD_O* defs in xv.h */ +-static char *padOMStr[] = { "RGB", "Int.", "Hue", "Sat." }; ++static const char *padOMStr[] = { "RGB", "Int.", "Hue", "Sat." }; + + #define PAD_MAXDEFLEN 10 +-static int padColLen = 0, padBgLen = 0, padLoadLen = 0; +-static char *padColNames [PAD_MAXDEFLEN], *padColVals [PAD_MAXDEFLEN]; +-static char *padBgNames [PAD_MAXDEFLEN], *padBgVals [PAD_MAXDEFLEN]; +-static char *padLoadNames[PAD_MAXDEFLEN], *padLoadVals[PAD_MAXDEFLEN]; ++static int padColLen = 0; ++static const char *padColNames [PAD_MAXDEFLEN]; ++static const char *padColVals [PAD_MAXDEFLEN]; ++static int padBgLen = 0; ++static const char *padBgNames [PAD_MAXDEFLEN]; ++static const char *padBgVals [PAD_MAXDEFLEN]; ++static int padLoadLen = 0; ++static const char *padLoadNames[PAD_MAXDEFLEN]; ++static const char *padLoadVals [PAD_MAXDEFLEN]; + + + /***************************************************/ +@@ -150,11 +155,11 @@ if (wy + h > dispHIGH) wy = dispHIGH - h; } @@ -23337,7 +34473,32 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c else { wx -= (ch_offx); wy -= (ch_offy); -@@ -197,7 +198,7 @@ +@@ -174,16 +179,20 @@ + + /***************************************************/ + int PopUp(txt, labels, n) +- char *txt, *labels[]; +- int n; ++ const char *txt; ++ const char *labels[]; ++ int n; + { + return doPopUp(txt, labels, n, ISPOPUP, "xv confirm"); + } + ++ + /***************************************************/ + static int doPopUp(txt, labels, n, poptyp, wname) +- char *txt, *labels[], *wname; +- int n, poptyp; ++ const char *txt; ++ const char *labels[]; ++ int n, poptyp; ++ const char *wname; + { + int i; + XEvent event; +@@ -197,17 +206,17 @@ /* attach controls to popW, now that it exists */ if (poptyp==ISGRAB) ahideCB.win = popW; else if (poptyp == ISPAD) { @@ -23345,8 +34506,21 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c + if (!padHaveDooDads) { DCreate(&padWDial, popW, 16, puhigh-16-100-1,75,100, - 1, 2048, pWIDE, 10, -@@ -230,8 +231,8 @@ +- 1, 2048, pWIDE, 10, ++ 1.0, 2048.0, (double)pWIDE, 1.0, 10.0, + infofg, infobg, hicol, locol, "Width", NULL); + DCreate(&padHDial, popW, 16+1+75, puhigh-16-100-1,75,100, +- 1, 2048, pHIGH, 10, ++ 1.0, 2048.0, (double)pHIGH, 1.0, 10.0, + infofg, infobg, hicol, locol, "Height", NULL); + + DCreate(&padODial, popW, 16+1+75+75+9, puhigh-16-100-1,75,100, +- 0, 100, 100, 10, ++ 0.0, 100.0, 100.0, 1.0, 10.0, + infofg, infobg, hicol, locol, "Opaque", NULL); + + MBCreate(&padMthdMB, popW, 100-2+44, 10, 140, 19, NULL, +@@ -230,8 +239,8 @@ XMapWindow(theDisp, padWDial.win); XMapWindow(theDisp, padHDial.win); XMapWindow(theDisp, padODial.win); @@ -23357,19 +34531,22 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c XResizeWindow(theDisp, popW, (u_int) puwide, (u_int) puhigh); XStoreName (theDisp, popW, wname); -@@ -257,9 +258,9 @@ +@@ -257,10 +266,10 @@ } else if (poptyp == ISPAD) { BTSetActive(&bts[0], (int) strlen(gsBuf)); - i = pWIDE * 3; RANGE(i,2048,9999); -+ i = pWIDE * 3; RANGE(i,2048,9999); - DSetRange(&padWDial, 1, i, padWDial.val, 10); +- DSetRange(&padWDial, 1, i, padWDial.val, 10); - i = pHIGH * 3; RANGE(i,2048,9999); +- DSetRange(&padHDial, 1, i, padHDial.val, 10); ++ i = pWIDE * 3; RANGE(i,2048,9999); ++ DSetRange(&padWDial, 1.0, (double)i, padWDial.val, 1.0, 10.0); + i = pHIGH * 3; RANGE(i,2048,9999); - DSetRange(&padHDial, 1, i, padHDial.val, 10); ++ DSetRange(&padHDial, 1.0, (double)i, padHDial.val, 1.0, 10.0); DSetActive(&padWDial, (padMode!=PAD_LOAD)); /* DSetRange activates dial */ -@@ -283,14 +284,14 @@ + DSetActive(&padHDial, (padMode!=PAD_LOAD)); +@@ -283,18 +292,22 @@ } } @@ -23377,16 +34554,51 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c + /* center first button in window around mouse position, with constraint that window be fully on the screen */ - CenterMapWindow(popW, 40 + bts[0].x, BUTTH/2 + bts[0].y, puwide, puhigh); +- CenterMapWindow(popW, 40 + bts[0].x, BUTTH/2 + bts[0].y, puwide, puhigh); popUp = poptyp; ++ if (startGrab == 2) ++ startGrab = 4; ++ else { ++ CenterMapWindow(popW, 40 + bts[0].x, BUTTH/2 + bts[0].y, puwide, puhigh); - /* MUST wait for VisibilityNotify event to come in, else we run the risk +- /* MUST wait for VisibilityNotify event to come in, else we run the risk - of UnMapping the window *before* the Map request completed. This -+ of UnMapping the window *before* the Map request completed. This - appears to be bad, (It leaves an empty window frame up.) though it - generally only happens on slow servers. Better safe than screwed... */ +- appears to be bad, (It leaves an empty window frame up.) though it +- generally only happens on slow servers. Better safe than screwed... */ ++ /* MUST wait for VisibilityNotify event to come in, else we run the risk ++ of UnMapping the window *before* the Map request completed. This ++ appears to be bad, (It leaves an empty window frame up.) though it ++ generally only happens on slow servers. Better safe than screwed... */ + +- XWindowEvent(theDisp, popW, VisibilityChangeMask, &event); ++ XWindowEvent(theDisp, popW, VisibilityChangeMask, &event); ++ } + + /* block until this window gets closed */ + while (popUp) { +@@ -312,7 +325,8 @@ + + /***************************************************/ + void ErrPopUp(txt, label) +- char *txt, *label; ++ const char *txt; ++ const char *label; + { + /* simplified interface to PopUp. Takes a string and the label for the + (one) button */ +@@ -323,7 +337,10 @@ -@@ -338,10 +339,10 @@ + /***************************************************/ + int GetStrPopUp(txt, labels, n, buf, buflen, filstr, allow) +- char *txt, *labels[], *buf, *filstr; ++ const char *txt; ++ const char *labels[]; ++ char *buf; ++ const char *filstr; + int n, buflen, allow; + { + /* pops up a window with a prompt string, a 1-line editable +@@ -338,10 +355,10 @@ button labels have 1-character accellerators at the front, same as in PopUp(). Note that it would be suboptimal to make any of the 1-character accellerators be the same character as one of @@ -23399,7 +34611,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c (ie, interpreted as emacs-like commands) */ gsBuf = buf; gsBufLen = buflen; -@@ -358,7 +359,7 @@ +@@ -358,7 +375,7 @@ gsy = PUHIGH - 10 - BUTTH - 10 - gsh - 20; gsw = PUWIDE - gsx - 10; @@ -23408,7 +34620,20 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c changedGSBuf(); /* careful! popW doesn't exist yet! */ return doPopUp(txt, labels, n, ISGETSTR, "xv prompt"); -@@ -390,7 +391,7 @@ +@@ -371,9 +388,9 @@ + { + /* pops up Grab options dialog box */ + +- int rv; +- char delaybuf[32], grabTxt[1024]; +- static char *grabLabels[] = { "\nGrab", "aAutoGrab", "\033Cancel" }; ++ int rv; ++ char delaybuf[32], grabTxt[1024]; ++ static const char *grabLabels[] = { "\nGrab", "aAutoGrab", "\033Cancel" }; + + sprintf(delaybuf,"%d", *pDelay); + gsBuf = delaybuf; gsBufLen = 3; +@@ -390,7 +407,7 @@ changedGSBuf(); /* careful! popW doesn't exist yet! */ /* window value gets filled in in doPopUp() */ @@ -23417,29 +34642,65 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c PUWIDE-10-18-StringWidth(HIDESTR), gsy+2, HIDESTR, infofg, infobg, hicol, locol); ahideCB.val = *pHide; -@@ -464,8 +465,8 @@ +@@ -417,9 +434,9 @@ + { + /* pops up 'Pad' options dialog box */ + +- int rv, oldW, oldH, oldO; +- static int firsttime=1; +- static char *labels[] = { "\nOk", "\033Cancel" }; ++ int rv, oldW, oldH, oldO; ++ static int firsttime=1; ++ static const char *labels[] = { "\nOk", "\033Cancel" }; + + if (firsttime) { + padSbuf[0] = '\0'; +@@ -464,10 +481,10 @@ changedGSBuf(); /* careful! popW doesn't exist yet! */ - if (padHaveDooDads) { - oldW = padWDial.val; +- oldH = padHDial.val; +- oldO = padODial.val; + if (padHaveDooDads) { -+ oldW = padWDial.val; - oldH = padHDial.val; - oldO = padODial.val; ++ oldW = (int)padWDial.val; ++ oldH = (int)padHDial.val; ++ oldO = (int)padODial.val; + } + else { oldW = pWIDE; oldH = pHIGH; oldO = 100; } + +@@ -486,9 +503,9 @@ + } + + if (rv == 1) { /* cancelled: restore normal values */ +- DSetVal(&padWDial, oldW); +- DSetVal(&padHDial, oldH); +- DSetVal(&padODial, oldO); ++ DSetVal(&padWDial, (double)oldW); ++ DSetVal(&padHDial, (double)oldH); ++ DSetVal(&padODial, (double)oldO); } -@@ -496,8 +497,8 @@ + + XUnmapWindow(theDisp, padWDial.win); +@@ -496,11 +513,11 @@ XUnmapWindow(theDisp, padODial.win); /* load up return values */ - *pMode = padMode; - *pStr = padBuf; +- *pWide = padWDial.val; +- *pHigh = padHDial.val; +- *pOpaque = padODial.val; + *pMode = padMode; + *pStr = padBuf; - *pWide = padWDial.val; - *pHigh = padHDial.val; - *pOpaque = padODial.val; -@@ -513,8 +514,6 @@ ++ *pWide = (int)padWDial.val; ++ *pHigh = (int)padHDial.val; ++ *pOpaque = (int)padODial.val; + *pOmode = padOMode; + + return rv; +@@ -513,8 +530,6 @@ /* generates padCol* and padBg* lists used in 'Defaults' MBUTT. Grabs all the X resources values it can, and adds appropriate defaults */ @@ -23448,9 +34709,12 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c rd_str_cl("foo", "", 1); /* rebuild database */ build1PadList("color", padColVals, padColNames, &padColLen, -@@ -526,15 +525,15 @@ +@@ -524,49 +539,52 @@ + padBgDefVals, padBgDefNames, padBgDefLen); + build1PadList("load", padLoadVals, padLoadNames, &padLoadLen, - (char **) NULL, (char **) NULL, 0); +- (char **) NULL, (char **) NULL, 0); ++ (const char **) NULL, (const char **) NULL, 0); } - - @@ -23458,43 +34722,90 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c + /***************************************************/ static void build1PadList(typstr, vals, nams, lenp, dvals, dnams, dlen) - char *typstr, **vals, **nams, **dvals, **dnams; - int *lenp, dlen; - { - int i; +- char *typstr, **vals, **nams, **dvals, **dnams; +- int *lenp, dlen; +-{ +- int i; - char resname[128], name[256], value[256]; -+ char resname[128]; ++ const char *typstr; ++ const char **vals, **nams; ++ const char **dvals, **dnams; ++ int *lenp, dlen; ++{ ++ int i; ++ char resname[128]; ++ char *copy; for (i=0; i<*lenp; i++) { /* kill old lists */ - free(nams[i]); -@@ -548,7 +547,7 @@ - vals[*lenp] = (char *) malloc(strlen(def_str)+1); - if (!vals[*lenp]) continue; - strcpy(vals[*lenp], def_str); +- free(nams[i]); +- free(vals[i]); ++ free((char *) nams[i]); ++ free((char *) vals[i]); + } + *lenp = 0; + + for (i=0; i<10; i++) { + sprintf(resname, "pad.%s.val%d", typstr, i); + if (rd_str_cl(resname, "Dialog.Menu.Slot",0)) { /* got one! */ +- vals[*lenp] = (char *) malloc(strlen(def_str)+1); +- if (!vals[*lenp]) continue; +- strcpy(vals[*lenp], def_str); - ++ copy = strdup(def_str); ++ if (!copy) continue; ++ vals[*lenp] = copy; + sprintf(resname, "pad.%s.name%d", typstr, i); if (rd_str_cl(resname, "Dialog.Menu.Slot",0)) { /* and it has a name! */ - nams[*lenp] = (char *) malloc(strlen(def_str)+1); -@@ -560,13 +559,14 @@ - nams[*lenp] = (char *) malloc((size_t) 32); - if (!nams[*lenp]) { free(vals[*lenp]); continue; } - strncpy(nams[*lenp], vals[*lenp], (size_t) 31); -+ nams[*lenp][31] = '\0'; +- nams[*lenp] = (char *) malloc(strlen(def_str)+1); +- if (!nams[*lenp]) { free(vals[*lenp]); continue; } +- strcpy(nams[*lenp], def_str); +- ++ copy = strdup(def_str); ++ if (!copy) { free((char *) vals[*lenp]); continue; } + } + else { /* it doesn't have a name. fabricate one */ +- nams[*lenp] = (char *) malloc((size_t) 32); +- if (!nams[*lenp]) { free(vals[*lenp]); continue; } +- strncpy(nams[*lenp], vals[*lenp], (size_t) 31); ++ copy = malloc((size_t) 32); ++ if (!copy) { free((char *) vals[*lenp]); continue; } ++ strncpy(copy, vals[*lenp], (size_t) 31); ++ copy[31] = '\0'; } - +- if (strlen(nams[*lenp]) > (size_t) 20) { /* fix long names */ +- char *sp = nams[*lenp] + 18; ++ if (strlen(copy) > (size_t) 20) { /* fix long names */ ++ char *sp = copy + 18; + - if (strlen(nams[*lenp]) > (size_t) 20) { /* fix long names */ - char *sp = nams[*lenp] + 18; *sp++ = '.'; *sp++ = '.'; *sp++ = '.'; *sp++ = '\0'; } - ++ nams[*lenp] = copy; + *lenp = (*lenp) + 1; } } -@@ -583,7 +583,7 @@ - strcpy(nams[*lenp], dnams[i]); +@@ -574,16 +592,17 @@ + + /* add 'built-in' defaults to the lists */ + for (i=0; i<dlen && *lenp<PAD_MAXDEFLEN; i++) { +- vals[*lenp] = (char *) malloc(strlen(dvals[i])+1); +- if (!vals[*lenp]) break; +- strcpy(vals[*lenp], dvals[i]); +- +- nams[*lenp] = (char *) malloc(strlen(dnams[i])+1); +- if (!nams[*lenp]) { free(vals[*lenp]); break; } +- strcpy(nams[*lenp], dnams[i]); ++ copy = strdup(dvals[i]); ++ if (!copy) break; ++ vals[*lenp] = copy; ++ ++ copy = strdup(dnams[i]); ++ if (!copy) { free((char *) vals[*lenp]); break; } ++ nams[*lenp] = copy; ++ *lenp = (*lenp) + 1; } -} @@ -23502,16 +34813,19 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c -@@ -605,7 +605,7 @@ +@@ -603,9 +622,9 @@ + + /***************************************************/ void OpenAlert(txt) - char *txt; +- char *txt; ++ const char *txt; { - /* pops up a window with txt displayed in it (*no buttons*). + /* pops up a window with txt displayed in it (*no buttons*). returns immediately. window is closed by 'CloseAlert()'. No 'PopUp()' calls are allowed while an Alert is displayed. */ -@@ -624,14 +624,14 @@ +@@ -624,14 +643,14 @@ puwide = PUWIDE; puhigh = PUHIGH; XResizeWindow(theDisp, popW, (u_int) puwide, (u_int) puhigh); @@ -23528,7 +34842,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c appears to be bad, (It leaves an empty window frame up.) though it generally only happens on slow servers. Better safe than screwed... */ -@@ -695,7 +695,7 @@ +@@ -695,7 +714,7 @@ XKeyEvent *e = (XKeyEvent *) xev; char buf[128]; KeySym ks; int stlen, i, shift, ck; @@ -23537,7 +34851,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c stlen = XLookupString(e,buf,128,&ks,(XComposeStatus *) NULL); shift = e->state & ShiftMask; ck = CursorKey(ks, shift, 0); -@@ -725,7 +725,7 @@ +@@ -725,7 +744,7 @@ rv = 1; } @@ -23546,8 +34860,31 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c if (e->window == popW) { doGetStrKey(buf[0]); rv = 1; } } } -@@ -775,10 +775,10 @@ - int i, inbreak, lineno, top, hardcr, maxln, len[TR_MAXLN]; +@@ -765,26 +784,31 @@ + #define TR_MAXLN 10 + + /***************************************************/ +-void TextRect(win, txt, x, y, w, h, fg) +- Window win; +- char *txt; +- int x,y,w,h; +- u_long fg; +-{ +- char *sp, *ep, *oldep, *start[TR_MAXLN]; +- int i, inbreak, lineno, top, hardcr, maxln, len[TR_MAXLN]; ++static void TextRect(win, txt, x, y, w, h, fg) ++ Window win; ++ const char *txt; ++ int x,y,w,h; ++ u_long fg; ++{ ++ /* draws semi-complex strings in a rectangle */ ++ ++ const char *sp; ++ const char *ep; ++ const char *oldep; ++ const char *start[TR_MAXLN]; ++ int i, inbreak, lineno, top, hardcr, maxln, len[TR_MAXLN]; XSetForeground(theDisp, theGC, fg); - @@ -23559,7 +34896,14 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c RANGE(maxln,0,TR_MAXLN); while (*sp && lineno<maxln) { -@@ -797,7 +797,7 @@ + /* drop off any leading spaces (except on first line or after \n) */ + if (sp!=txt && !hardcr) { +- while(*sp==' ') sp++; ++ while (*sp==' ') sp++; + } + + hardcr = 0; ep = sp; +@@ -797,7 +821,7 @@ while (XTextWidth(mfinfo, sp, (int)(ep-sp))<= w && *ep && *ep!='\n') ep++; if (*ep=='\n') { ep++; hardcr=1; } /* eat newline */ @@ -23568,7 +34912,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c (last char before a space or a '/') */ if (XTextWidth(mfinfo, sp, (int)(ep-sp)) > w) { -@@ -812,7 +812,7 @@ +@@ -812,7 +836,7 @@ } start[lineno] = sp; len[lineno] = ep-sp; @@ -23577,7 +34921,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c /* make sure we don't print a trailing '\n' character! */ if (len[lineno] > 0) { while (sp[len[lineno]-1] == '\n') len[lineno] = len[lineno] - 1; -@@ -835,7 +835,7 @@ +@@ -835,7 +859,7 @@ /***************************************************/ static void createPUD() { @@ -23586,7 +34930,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c PUWIDE, PUHIGH, infofg, infobg, 0); if (!popW) FatalError("can't create popup window!"); -@@ -847,7 +847,7 @@ +@@ -847,7 +871,7 @@ bts = (BUTT *) NULL; nbts = selected = firsttime = 0; } @@ -23595,7 +34939,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c /***************************************************/ static void attachPUD() -@@ -913,24 +913,24 @@ +@@ -913,24 +937,24 @@ XDrawLine(theDisp, popW, theGC, 16+1+75+75+5, puhigh-140 + 6+8, 16+1+75+75+5, puhigh-10-4); } @@ -23627,7 +34971,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c if (popUp == ISGETSTR) { TextRect(popW, text, xt, yt, puwide-10-xt, gsy-20, infofg); drawGSBuf(); -@@ -947,22 +947,22 @@ +@@ -947,23 +971,23 @@ /***************************************************/ static void drawPadOMStr() { @@ -23642,19 +34986,33 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c int x,y; { int i; - BUTT *bp; +- BUTT *bp; - ++ BUTT *bp = NULL; + for (i=0; i<nbts; i++) { bp = &bts[i]; if (PTINRECT(x, y, bp->x, bp->y, bp->w, bp->h)) break; } - +- if (i<nbts && BTTrack(bp)) { + - if (i<nbts && BTTrack(bp)) { ++ if (i<nbts && bp && BTTrack(bp)) { popUp = 0; selected = i; return; } -@@ -1017,11 +1017,11 @@ + +@@ -972,8 +996,8 @@ + else if (popUp == ISPAD) { + if (PTINRECT(x, y, padDButt.x, padDButt.y, padDButt.w, padDButt.h)) { + if (BTTrack(&padDButt)) { +- DSetVal(&padWDial, pWIDE); +- DSetVal(&padHDial, pHIGH); ++ DSetVal(&padWDial, (double)pWIDE); ++ DSetVal(&padHDial, (double)pHIGH); + } + } + +@@ -1017,11 +1041,11 @@ gsCurPos = strlen(gsBuf); gsStPos = gsEnPos = 0; changedGSBuf(); @@ -23669,7 +35027,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c (u_int)gsw-1, (u_int)gsh-1, False); drawGSBuf(); -@@ -1032,7 +1032,7 @@ +@@ -1032,7 +1056,7 @@ DSetActive (&padWDial, (i!=PAD_LOAD)); DSetActive (&padHDial, (i!=PAD_LOAD)); @@ -23678,7 +35036,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c (u_int) puwide-10-184-10, 130-6 - BUTTH-10, True); padMode = i; -@@ -1049,11 +1049,11 @@ +@@ -1049,11 +1073,11 @@ gsCurPos = strlen(gsBuf); gsStPos = gsEnPos = 0; changedGSBuf(); @@ -23693,7 +35051,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c (u_int)gsw-1, (u_int)gsh-1, False); drawGSBuf(); -@@ -1079,8 +1079,8 @@ +@@ -1079,8 +1103,8 @@ /* handle characters typed at GetStrPopUp window. Button accel. keys have already been checked for elsewhere. Practical upshot is that we don't have to do anything with ESC or Return (as these will normally @@ -23704,7 +35062,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c Normally returns '0'. Returns '1' if character wasn't accepted, for whatever reason. */ -@@ -1089,7 +1089,7 @@ +@@ -1089,7 +1113,7 @@ len = strlen(gsBuf); if (gsFilter) flen = strlen(gsFilter); else flen = 0; @@ -23713,7 +35071,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c if (c>=' ' && c<'\177') { /* 'NORMAL' CHARACTERS */ if (flen) { /* check filter string */ -@@ -1097,7 +1097,7 @@ +@@ -1097,7 +1121,7 @@ if (!gsAllow && i< flen) return 1; /* found in 'disallow' filter */ if ( gsAllow && i==flen) return 1; /* not found in 'allow' filter */ } @@ -23722,7 +35080,25 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c if (len >= gsBufLen-1) return 1; /* at max length */ xvbcopy(&gsBuf[gsCurPos], &gsBuf[gsCurPos+1], (size_t) len-gsCurPos+1); -@@ -1147,7 +1147,7 @@ +@@ -1105,7 +1129,7 @@ + } + + +- else if (c=='\010' || c=='\177') { /* BS or DEL */ ++ else if (c=='\010') { /* BS */ + if (gsCurPos==0) return 1; /* at beginning of str */ + xvbcopy(&gsBuf[gsCurPos], &gsBuf[gsCurPos-1], (size_t) len-gsCurPos+1); + gsCurPos--; +@@ -1128,7 +1152,7 @@ + gsCurPos = len; + } + +- else if (c=='\004') { /* ^D: delete character at gsCurPos */ ++ else if (c=='\004' || c=='\177') { /* ^D or DEL: delete character at gsCurPos */ + if (gsCurPos==len) return 1; + xvbcopy(&gsBuf[gsCurPos+1], &gsBuf[gsCurPos], (size_t) len-gsCurPos); + } +@@ -1147,7 +1171,7 @@ changedGSBuf(); /* compute gsEnPos, gsStPos */ @@ -23731,7 +35107,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c XClearArea(theDisp, popW, gsx+3,gsy+3, (u_int)gsw-5, (u_int)gsh-5, False); else XClearArea(theDisp, popW, gsx+1,gsy+1, (u_int)gsw-1, (u_int)gsh-1, False); -@@ -1175,7 +1175,7 @@ +@@ -1175,7 +1199,7 @@ /***************************************************/ static void changedGSBuf() { @@ -23740,7 +35116,7 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c portion of gsBuf */ int len; -@@ -1212,7 +1212,7 @@ +@@ -1212,7 +1236,7 @@ XSetForeground(theDisp, theGC, infofg); XDrawRectangle(theDisp, popW, theGC, gsx, gsy, (u_int) gsw, (u_int) gsh); @@ -23749,9 +35125,9 @@ diff -ruN xv-3.10a/xvpopup.c xv-3.10a-bugfixes/xvpopup.c R3D_IN, 2, hicol,locol,infobg); XSetForeground(theDisp, theGC, infofg); -diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c +diff -ru xv-3.10a/xvps.c xv-3.10a-enhancements/xvps.c --- xv-3.10a/xvps.c 1994-12-22 14:34:42.000000000 -0800 -+++ xv-3.10a-bugfixes/xvps.c 2005-03-30 08:18:17.000000000 -0800 ++++ xv-3.10a-enhancements/xvps.c 2007-05-12 15:25:59.000000000 -0700 @@ -1,4 +1,4 @@ -/* +/* @@ -23765,7 +35141,8 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c -static void epsPreview PARM((FILE *, byte *, int, int, int, int, +static void epsPreview PARM((FILE *, byte *, int, int, int, int, byte *, byte *, byte *, int)); - static int writeBWStip PARM((FILE *, byte *, char *, int, int, int)); +-static int writeBWStip PARM((FILE *, byte *, char *, int, int, int)); ++static int writeBWStip PARM((FILE *, byte *, const char *, int, int, int)); +#ifdef GS_PATH +static void buildCmdStr PARM((char *, char *, char *, int, int)); @@ -23787,10 +35164,10 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c CBCreate(&pscompCB, psW, 331, 7, "compress", infofg, infobg, hicol, locol); - DCreate(&xsDial, psW, 240, 30, 80, 100, 10, 800, 100, 5, -+ DCreate(&xsDial, psW, 240, 30, 80, 100, 10, 800, 100, 5, ++ DCreate(&xsDial, psW, 240, 30, 80, 100, 10.0, 800.0, 100.0, 0.5, 5.0, infofg, infobg, hicol, locol, "Width", "%"); - DCreate(&ysDial, psW, 331, 30, 80, 100, 10, 800, 100, 5, -+ DCreate(&ysDial, psW, 331, 30, 80, 100, 10, 800, 100, 5, ++ DCreate(&ysDial, psW, 331, 30, 80, 100, 10.0, 800.0, 100.0, 0.5, 5.0, infofg, infobg, hicol, locol, "Height", "%"); xsDial.drawobj = changedScale; ysDial.drawobj = changedScale; @@ -23846,7 +35223,20 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c infofg, infobg, hicol, locol); posxType = posyType = 0; -@@ -246,7 +249,7 @@ +@@ -236,17 +239,17 @@ + + if (rd_int("psres")) { /* xv.psres: default paper resolution */ + if (def_int >= 10 && def_int <= 720) { +- int i = (int) ((PIX2INCH * 100) / def_int); ++ double v = (PIX2INCH * 100) / def_int; + +- DSetVal(&xsDial, i); +- DSetVal(&ysDial, i); ++ DSetVal(&xsDial, v); ++ DSetVal(&ysDial, v); + } + } + XMapSubwindows(theDisp, psW); } @@ -23873,7 +35263,35 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c stlen = XLookupString(e,buf,128,&ks,(XComposeStatus *) NULL); shift = e->state & ShiftMask; ck = CursorKey(ks, shift, 0); -@@ -497,7 +500,7 @@ +@@ -403,7 +406,7 @@ + static void drawPSD(x,y,w,h) + int x,y,w,h; + { +- char *title = "Save PostScript File..."; ++ const char *title = "Save PostScript File..."; + int i,cx; + XRectangle xr; + +@@ -463,12 +466,14 @@ + /***************************************************/ + static void drawPosStr() + { +- int x,y; +- double cmx, cmy, inx, iny; +- char str[64], str1[64], *xst, *yst; ++ int x,y; ++ double cmx, cmy, inx, iny; ++ char str[64], str1[64]; ++ const char *xst, *yst; + + x = 256; y = 190 + 13; +- inx = iny = 0; xst = yst = (char *) NULL; ++ inx = iny = 0; ++ xst = yst = (const char *) NULL; + + switch (posxType) { + case 0: xst = "Left: "; inx = pos_inx; break; +@@ -497,7 +502,7 @@ XSetFont(theDisp, theGC, mfont); } @@ -23882,7 +35300,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c /***************************************************/ static void drawSizeStr() { -@@ -522,7 +525,7 @@ +@@ -522,7 +527,7 @@ XSetFont(theDisp, theGC, mfont); } @@ -23891,7 +35309,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c /***************************************************/ static void drawResStr() { -@@ -540,9 +543,9 @@ +@@ -540,9 +545,9 @@ XSetFont(theDisp, theGC, mfont); } @@ -23904,7 +35322,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c /***************************************************/ static void drawPage() { -@@ -554,7 +557,7 @@ +@@ -554,7 +559,7 @@ XSetForeground(theDisp, theGC, infofg); XDrawRectangle(theDisp, pageF, theGC, pageRect.x, pageRect.y, (u_int) pageRect.width, (u_int) pageRect.height); @@ -23913,7 +35331,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c drawIRect(1); } -@@ -611,7 +614,7 @@ +@@ -611,7 +616,7 @@ unsigned int mask; double offx, offy, newx, newy; @@ -23922,7 +35340,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c the top-left corner of the image */ offx = ((mx - pageRect.x) / in2pix) - pos_inx; -@@ -642,7 +645,7 @@ +@@ -642,7 +647,7 @@ char *fullname; switch (cmd) { @@ -23931,7 +35349,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c PSDialog(0); fullname = GetDirFullName(); if (!ISPIPE(fullname[0])) { -@@ -721,15 +724,15 @@ +@@ -721,15 +726,15 @@ GetSaveSize(&w, &h); @@ -23951,7 +35369,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c /* make sure 'center' of image is still on page */ hsx = sz_inx/2; hsy = sz_iny/2; -@@ -783,20 +786,20 @@ +@@ -783,20 +788,20 @@ { int x,y,w,h; XRectangle xr; @@ -23976,8 +35394,12 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c XSetClipRectangles(theDisp, theGC, 0,0, &xr, 1, Unsorted); XDrawRectangle(theDisp, pageF, theGC, x, y, (u_int) w, (u_int) h); XDrawLine(theDisp, pageF, theGC, x, y, x+w, y+h); -@@ -839,15 +842,15 @@ - DSetVal(&xsDial, (int) ((100 * (sz_inx * PIX2INCH) / w) + .5)); +@@ -836,18 +841,18 @@ + if (scx < scy) { sz_iny = h * scx; } + else { sz_inx = w * scy; } + +- DSetVal(&xsDial, (int) ((100 * (sz_inx * PIX2INCH) / w) + .5)); ++ DSetVal(&xsDial, 100 * (sz_inx * PIX2INCH) / w); DSetVal(&ysDial, xsDial.val); - sz_inx = (double) w / PIX2INCH * (xsDial.val / 100.0); @@ -23996,7 +35418,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c pos_inx = psizex/2 - sz_inx/2; pos_iny = psizey/2 - sz_iny/2; -@@ -888,7 +891,7 @@ +@@ -888,7 +893,7 @@ static void writePS() { FILE *fp; @@ -24005,7 +35427,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c int iw, ih, ox, oy, slen, lwidth, bits, colorps, w, h, pfree; double iwf, ihf; byte *inpix, *rmap, *gmap, *bmap; -@@ -900,13 +903,19 @@ +@@ -900,13 +905,19 @@ if (!fp) return; WaitCursor(); @@ -24028,7 +35450,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c iwf = sz_inx * 72.0; ihf = sz_iny * 72.0; -@@ -923,12 +932,12 @@ +@@ -923,12 +934,12 @@ fprintf(fp,"%%%%Creator: XV %s - by John Bradley\n",REVDATE); if (RBWhich(orientRB)==ORNT_LAND) /* Landscape mode */ @@ -24043,7 +35465,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c fprintf(fp,"%%%%BoundingBox: %d %d %d %d\n", ox, oy, ox+iw, oy+ih); fprintf(fp,"%%%%Pages: 1\n"); -@@ -943,9 +952,9 @@ +@@ -943,9 +954,9 @@ case F_BWDITHER: slen = (w+7)/8; bits = 1; colorps = 0; break; default: FatalError("unknown colorType in writePS()"); break; } @@ -24055,7 +35477,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c (RBWhich(orientRB)==ORNT_LAND) ); fprintf(fp,"%%%%EndProlog\n\n"); -@@ -978,7 +987,7 @@ +@@ -978,7 +989,7 @@ fprintf(fp,"%% print in landscape mode\n"); fprintf(fp,"90 rotate 0 %d translate\n\n",(int) (-psizey*72.0)); } @@ -24064,7 +35486,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c if (RBWhich(paperRB) == PSZ_4BY5 || RBWhich(paperRB) == PSZ_35MM) { fprintf(fp,"%% we're going to a 4x5 or a 35mm film recorder.\n"); -@@ -1083,12 +1092,12 @@ +@@ -1083,12 +1094,12 @@ gpix = inpix[1]; bpix = inpix[2]; } @@ -24080,7 +35502,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c else { /* greyscale */ err = fprintf(fp,"%02x", MONO(rpix,gpix,bpix)); lwidth+=2; -@@ -1106,7 +1115,7 @@ +@@ -1106,7 +1117,7 @@ fprintf(fp,"\n\n"); fprintf(fp,"%%\n"); fprintf(fp,"%% Compression made this file %.2f%% %s\n", @@ -24089,7 +35511,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c ((double) eWIDE * eHIGH * ((colorps) ? 3 : 1)), "of the uncompressed size."); fprintf(fp,"%%\n"); -@@ -1147,10 +1156,10 @@ +@@ -1147,10 +1158,10 @@ * * returns length of the rleline vector */ @@ -24102,7 +35524,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c blocklen = isrun = rlen = 0; for (i=0; i<wide; i++) { -@@ -1186,7 +1195,7 @@ +@@ -1186,7 +1197,7 @@ } } } @@ -24111,7 +35533,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c else { /* not a run */ if (pix == block[blocklen-1]) { /* case 3: non-run, prev==cur */ if (blocklen>1) { /* have a non-run block to flush */ -@@ -1215,7 +1224,7 @@ +@@ -1215,7 +1226,7 @@ else { rleline[rlen++] = (blocklen-1) | 0x80; @@ -24120,7 +35542,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c rleline[rlen++] = block[j]; } -@@ -1231,15 +1240,15 @@ +@@ -1231,15 +1242,15 @@ else { rleline[rlen++] = (blocklen-1) | 0x80; @@ -24139,7 +35561,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c /**********************************************/ static void psColorImage(fp) FILE *fp; -@@ -1276,7 +1285,7 @@ +@@ -1276,7 +1287,7 @@ fprintf(fp," %% Utility procedure for colorimage operator.\n"); fprintf(fp," %% This procedure takes two procedures off the\n"); fprintf(fp," %% stack and merges them into a single procedure.\n\n"); @@ -24148,7 +35570,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c fprintf(fp," /mergeprocs { %% def\n"); fprintf(fp," dup length\n"); fprintf(fp," 3 -1 roll\n"); -@@ -1326,12 +1335,12 @@ +@@ -1326,12 +1337,12 @@ for (i=0; i<nc; i++) { if (color) fprintf(fp,"%02x%02x%02x ", rmap[i],gmap[i],bmap[i]); else fprintf(fp,"%02x ", MONO(rmap[i],gmap[i],bmap[i])); @@ -24163,7 +35585,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c } -@@ -1407,7 +1416,7 @@ +@@ -1407,7 +1418,7 @@ /**********************************************/ @@ -24172,7 +35594,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c landscape) FILE *fp; byte *pic; -@@ -1420,21 +1429,37 @@ +@@ -1420,21 +1431,37 @@ if (landscape) { /* generate a rotated version of the pic */ @@ -24216,7 +35638,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c if (colorType != F_BWDITHER) { /* have to generate a preview */ prev = FSDither(pic, ptype, w, h, rmap,gmap,bmap, 0, 1); -@@ -1451,8 +1476,8 @@ +@@ -1451,8 +1478,8 @@ flipbw = (MONO(rmap[0],gmap[0],bmap[0]) > MONO(rmap[1],gmap[1],bmap[1])); } @@ -24227,8 +35649,12 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c (w/(72*4) + 1) * h); writeBWStip(fp, prev, "% ", w, h, !flipbw); -@@ -1471,7 +1496,7 @@ - char *prompt; +@@ -1468,10 +1495,10 @@ + static int writeBWStip(fp, pic, prompt, w, h, flipbw) + FILE *fp; + byte *pic; +- char *prompt; ++ const char *prompt; int w, h, flipbw; { - /* write the given 'pic' (B/W stippled, 1 byte per pixel, 0=blk,1=wht) @@ -24236,17 +35662,18 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c out as hexadecimal, max of 72 hex chars per line. if 'flipbw', then 0=white, 1=black -@@ -1535,25 +1560,32 @@ +@@ -1535,39 +1562,46 @@ document is multiple pages, a series of PNM files are created, and the first one is loaded (but not deleted) */ - - char tmp[512], tmp1[512], tmpname[64]; - int gsresult, nump, i, filetype; +- char *rld; +#ifdef GS_PATH -+ char tmp[512], gscmd[512], cmdstr[512], tmpname[64]; ++ #define CMDSIZE 1024 ++ char tmp[512], gscmd[512], cmdstr[CMDSIZE], tmpname[64]; + int gsresult, nump, i, filetype, doalert, epsf; - char *rld; +#endif pinfo->pic = (byte *) NULL; @@ -24269,12 +35696,14 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c +#else mktemp(tmpname); - if (tmpname[0] == '\0') { /* mktemp() blew up */ +- sprintf(str,"LoadPS: Unable to create temporary filename???"); +- ErrPopUp(str, "\nHow unlikely!"); +#endif + if (tmpname[0] == '\0') { /* mktemp() or mkstemp() blew up */ - sprintf(str,"LoadPS: Unable to create temporary filename???"); - ErrPopUp(str, "\nHow unlikely!"); ++ sprintf(dummystr,"LoadPS: Unable to create temporary filename???"); ++ ErrPopUp(dummystr, "\nHow unlikely!"); return 0; -@@ -1561,13 +1593,13 @@ + } strcat(tmpname,"."); @@ -24283,7 +35712,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c #ifndef VMS /* VMS needs quotes around mixed case command lines */ - sprintf(tmp, "%s -sDEVICE=%s -r%d -q -dNOPAUSE -sOutputFile=%s%%d ", -+ sprintf(gscmd, "%s -sDEVICE=%s -r%d -q -dNOPAUSE -sOutputFile=%s%%d ", ++ sprintf(gscmd, "%s -sDEVICE=%s -r%d -q -dSAFER -dNOPAUSE -sOutputFile=%s%%d ", GS_PATH, gsDev, gsRes, tmpname); #else - sprintf(tmp, @@ -24291,7 +35720,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c "%s \"-sDEVICE=%s\" -r%d -q \"-dNOPAUSE\" \"-sOutputFile=%s%%d\" ", GS_PATH, gsDev, gsRes, tmpname); #endif -@@ -1575,74 +1607,60 @@ +@@ -1575,74 +1609,60 @@ #ifdef GS_LIB # ifndef VMS @@ -24403,7 +35832,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c WaitCursor(); -@@ -1664,7 +1682,7 @@ +@@ -1664,7 +1684,7 @@ return 0; } @@ -24412,7 +35841,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c GS_PATH, nump, (nump==1) ? "" : "s"); } -@@ -1677,8 +1695,8 @@ +@@ -1677,8 +1697,8 @@ sprintf(tmp, "%s%d", tmpname, 1); filetype = ReadFileType(tmp); @@ -24423,7 +35852,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c filetype == RFT_COMPRESS) { /* shouldn't happen */ SetISTR(ISTR_WARNING, "Couldn't load first page '%s'", tmp); KillPageFiles(tmpname, nump); -@@ -1695,7 +1713,7 @@ +@@ -1695,7 +1715,7 @@ KillPageFiles(tmpname, nump); SetCursors(-1); return 0; @@ -24432,7 +35861,7 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c /* SUCCESS! */ -@@ -1712,3 +1730,38 @@ +@@ -1712,3 +1732,54 @@ we don't have 'gs' package */ } @@ -24440,52 +35869,79 @@ diff -ruN xv-3.10a/xvps.c xv-3.10a-bugfixes/xvps.c + +/******************************************************************/ +#ifdef GS_PATH -+void buildCmdStr(str, gscmd, fname, quick, epsf) -+ char *str, *gscmd, *fname; ++void buildCmdStr(str, gscmd, xname, quick, epsf) ++ char *str, *gscmd, *xname; + int quick, epsf; +{ + /* note 'epsf' set only on files that don't have a showpage cmd */ ++ char *x, *y, *fname; ++ ++ x = (char *) malloc((5 * strlen(xname))+3); ++ if (!x) ++ FatalError("malloc failure in xvps.c buildCmdStr"); ++ fname = x; ++ *x++ = 0x27; ++ ++ for (y = xname; *y; ++y) { ++ if (0x27 == *y) { ++ strcpy(x, "'\"'\"'"); ++ x += strlen(x); ++ } else *x++ = *y; ++ } ++ strcpy (x, "'"); + +#ifndef VMS + -+ if (epsf) sprintf(str, "echo '\n showpage ' | cat '%s' - | %s -", ++ if (epsf) snprintf(str, CMDSIZE, "echo '\n showpage ' | cat %s - | %s -", + fname, gscmd); + -+ else if (quick) sprintf(str, "echo '%s' | cat - '%s' | %s -", ++ else if (quick) snprintf(str, CMDSIZE, "echo %s | cat - %s | %s -", + "/showpage { showpage quit } bind def", + fname, gscmd); + -+ else sprintf(str, "%s -- %s", gscmd, fname); ++ else snprintf(str, CMDSIZE, "%s -- %s", gscmd, fname); + +#else /* VMS */ + /* VMS doesn't have pipes or an 'echo' command and GS doesn't like -+ Unix-style file names as input files in the VMS version */ ++ Unix-style filenames as input files in the VMS version */ + strcat(tmp, " -- "); + rld = strrchr(fname, '/'); /* Pointer to last '/' */ + if (rld) rld++; /* Pointer to filename */ + else rld = fname; /* No path - use original string */ + strcat(tmp, rld); +#endif /* VMS */ ++ free(fname); +} +#endif /* GS_PATH */ + + + -diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c +diff -ru xv-3.10a/xvrle.c xv-3.10a-enhancements/xvrle.c --- xv-3.10a/xvrle.c 1995-01-19 09:27:47.000000000 -0800 -+++ xv-3.10a-bugfixes/xvrle.c 2005-03-29 23:29:14.000000000 -0800 -@@ -43,8 +43,8 @@ - byte bgcol[256]; ++++ xv-3.10a-enhancements/xvrle.c 2007-05-13 17:49:34.000000000 -0700 +@@ -28,7 +28,7 @@ + #define GETINT(fp) (c=getc(fp), c1=getc(fp), (c1<<8) + c ) + + static void read_rle PARM((FILE *, byte *, int, int, int, int)); +-static int rleError PARM((char *, char *)); ++static int rleError PARM((const char *, const char *)); + + + +@@ -44,9 +44,10 @@ byte maps[3][256]; int xpos, ypos, w, h, flags, ncolors, pixelbits, ncmap, cmaplen; -- int cmtlen; + int cmtlen; - byte *img, *pic8; -+ int cmtlen, npixels, bufsize=0; + byte *img; long filesize; - char *bname, *errstr; +- char *bname, *errstr; ++ const char *bname; ++ const char *errstr; -@@ -57,7 +57,7 @@ + pinfo->type = PIC8; + pinfo->pic = (byte *) NULL; +@@ -57,7 +58,7 @@ /* open the stream */ fp = xv_fopen(fname,"r"); if (!fp) return (rleError(bname, "unable to open file")); @@ -24494,7 +35950,7 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c /* figure out the file size */ fseek(fp, 0L, 2); -@@ -85,7 +85,7 @@ +@@ -85,7 +86,7 @@ if (DEBUG) { fprintf(stderr,"RLE: %dx%d image at %d,%d\n", w, h, xpos, ypos); fprintf(stderr,"flags: 0x%02x (%s%s%s%s)\n", @@ -24503,7 +35959,7 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c (flags & H_CLEARFIRST) ? "CLEARFIRST " : "", (flags & H_NO_BACKGROUND) ? "NO_BG " : "", (flags & H_ALPHA) ? "ALPHA " : "", -@@ -93,7 +93,7 @@ +@@ -93,7 +94,7 @@ fprintf(stderr, "%d bands, %d pixelbits, %d cmap bands, %d cmap entries\n", ncolors, pixelbits, ncmap, cmaplen); @@ -24512,93 +35968,16 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c if (!(flags & H_NO_BACKGROUND)) { if (DEBUG) fprintf(stderr, "background value: "); -@@ -176,32 +176,44 @@ - - errstr = NULL; - if (ncolors == 0 || ncolors == 2) -- errstr = "Unsupt. # of channels in RLE file.\n"; -+ errstr = "Unsupported number of channels in RLE file"; - - if (pixelbits != 8) -- errstr = "Only 8-bit pixels supported in RLE files.\n"; -+ errstr = "Only 8-bit pixels supported in RLE files"; - - if (ncmap==0 || ncmap==1 || ncmap == 3 || ncmap == ncolors) { /* ok */ } -- else errstr = "Invalid # of colormap channels in RLE file.\n"; -+ else errstr = "Invalid number of colormap channels in RLE file"; - -- if (w<1 || h<1) -- errstr = "Bogus size in RLE header.\n"; -+ npixels = w * h; -+ if (w <= 0 || h <= 0 || npixels/w != h) -+ errstr = "RLE image dimensions out of range"; - - - if (errstr) { - fclose(fp); -- if (pinfo->comment) free(pinfo->comment); pinfo->comment = (char *) NULL; -+ if (pinfo->comment) -+ free(pinfo->comment); -+ pinfo->comment = (char *) NULL; - return rleError(bname, errstr); - } - - - /* allocate image memory */ -- if (ncolors == 1) img = (byte *) calloc((size_t) w * h, (size_t) 1); -- else img = (byte *) calloc((size_t) w * h * 3, (size_t) 1); -+ if (ncolors == 1) -+ img = (byte *) calloc((size_t) npixels, (size_t) 1); -+ else { -+ bufsize = 3*npixels; -+ if (bufsize/3 != npixels) -+ return rleError(bname, "RLE image dimensions out of range"); -+ img = (byte *) calloc((size_t) bufsize, (size_t) 1); -+ } -+ - if (!img) { - fclose(fp); -- if (pinfo->comment) free(pinfo->comment); pinfo->comment = (char *) NULL; -- return rleError(bname, "unable to allocate image data.\n"); -+ if (pinfo->comment) -+ free(pinfo->comment); -+ pinfo->comment = (char *) NULL; -+ return rleError(bname, "Unable to allocate RLE image data"); - } - - -@@ -209,10 +221,10 @@ - if ((flags & H_CLEARFIRST) && !(flags & H_NO_BACKGROUND)) { - byte *ip; - if (ncolors == 1) { -- for (i=0, ip=img; i<w*h; i++, ip++) *ip = bgcol[0]; -+ for (i=0, ip=img; i<npixels; i++, ip++) *ip = bgcol[0]; +@@ -212,7 +213,7 @@ + for (i=0, ip=img; i<w*h; i++, ip++) *ip = bgcol[0]; } else { - for (i=0, ip=img; i<w*h; i++) -+ for (i=0, ip=img; i<npixels; i++) ++ for (i=0, ip=img; i<w*h; i++) for (j=0; j<3; j++, ip++) *ip = bgcol[j]; } } -@@ -230,7 +242,7 @@ - if (ncmap) { - byte *ip; - int imagelen, cmask; -- imagelen = (ncolors==1) ? w*h : w*h*3; -+ imagelen = (ncolors==1) ? npixels : bufsize; - cmask = (cmaplen-1); - - if (ncmap == 1) { /* single gamma curve */ -@@ -238,7 +250,7 @@ - } - - else if (ncmap >= 3 && ncolors >=3) { /* one curve per band */ -- for (i=0, ip=img; i<w*h; i++) { -+ for (i=0, ip=img; i<npixels; i++) { - *ip = maps[0][*ip & cmask]; ip++; - *ip = maps[1][*ip & cmask]; ip++; - *ip = maps[2][*ip & cmask]; ip++; -@@ -250,7 +262,7 @@ +@@ -250,7 +251,7 @@ /* finally, convert into XV internal format */ pinfo->pic = img; @@ -24607,7 +35986,7 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c pinfo->h = h; pinfo->normw = pinfo->w; pinfo->normh = pinfo->h; pinfo->frmType = -1; /* no default format to save in */ -@@ -260,7 +272,7 @@ +@@ -260,7 +261,7 @@ if (ncmap == 0 || ncmap == 1) { /* grey, or grey with gamma curve */ pinfo->colType = F_GREYSCALE; sprintf(pinfo->fullInfo, "Greyscale RLE. (%ld bytes)", filesize); @@ -24616,7 +35995,7 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c pinfo->r[i] = pinfo->g[i] = pinfo->b[i] = i; } else { -@@ -272,7 +284,7 @@ +@@ -272,7 +273,7 @@ pinfo->b[i] = maps[2][i]; } } @@ -24625,7 +36004,7 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c sprintf(pinfo->shrtInfo, "%dx%d RLE.",w, h); } -@@ -294,7 +306,7 @@ +@@ -294,7 +295,7 @@ int w, h, ncolors, ncmap; { int posx, posy, plane, bperpix, i, pixval, skipcalls; @@ -24634,7 +36013,7 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c byte *ip; posx = posy = plane = done = skipcalls = 0; -@@ -324,7 +336,7 @@ +@@ -324,7 +325,7 @@ case RSkipPixelsOp: if (opcode & LONG_OP) { getc(fp); operand = GETINT(fp); } else operand = getc(fp); @@ -24643,7 +36022,7 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c posx += operand; break; -@@ -340,7 +352,7 @@ +@@ -340,7 +341,7 @@ c = getc(fp); if (plane<ncolors && posy<h && (posx+i < w)) *ip = c; } @@ -24652,7 +36031,7 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c if (operand & 1) getc(fp); /* word boundary */ posx += operand; break; -@@ -358,7 +370,7 @@ +@@ -358,7 +359,7 @@ for (i=0; i<operand; i++, ip+=bperpix) { if (plane<ncolors && posy<h && (posx+i < w)) *ip = pixval; } @@ -24661,9 +36040,18 @@ diff -ruN xv-3.10a/xvrle.c xv-3.10a-bugfixes/xvrle.c /* if (operand & 1) getc(fp); */ /* word boundary */ posx += operand; break; -diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c +@@ -373,7 +374,7 @@ + + /*******************************************/ + static int rleError(fname,st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; +diff -ru xv-3.10a/xvroot.c xv-3.10a-enhancements/xvroot.c --- xv-3.10a/xvroot.c 1994-12-22 14:34:42.000000000 -0800 -+++ xv-3.10a-bugfixes/xvroot.c 2004-05-16 18:04:21.000000000 -0700 ++++ xv-3.10a-enhancements/xvroot.c 2004-05-16 18:07:52.000000000 -0700 @@ -22,7 +22,7 @@ /***********************************/ void MakeRootPic() @@ -24673,7 +36061,15 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c creates the XImage and the pixmap, sets the root to the new pixmap, and refreshes the display */ -@@ -67,32 +67,32 @@ +@@ -44,6 +44,7 @@ + case RM_MIRROR: + case RM_IMIRROR: rpixw = 2*eWIDE; rpixh = 2*eHIGH; break; + case RM_CSOLID: ++ case RM_UPLEFT: + case RM_CWARP: + case RM_CBRICK: rpixw = dispWIDE; rpixh = dispHIGH; break; + +@@ -67,32 +68,32 @@ if (rmode == RM_NORMAL || rmode == RM_TILE) { @@ -24711,7 +36107,16 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c (u_int) eWIDE, (u_int) eHIGH); FlipPic(epic, eWIDE, eHIGH, 1); /* flip vertically (back to orig) */ -@@ -122,15 +122,15 @@ +@@ -101,7 +102,7 @@ + + + else if (rmode == RM_CENTER || rmode == RM_CENTILE || rmode == RM_CSOLID || +- rmode == RM_CWARP || rmode == RM_CBRICK) { ++ rmode == RM_CWARP || rmode == RM_CBRICK || rmode == RM_UPLEFT) { + /* do some stuff to set up the border around the picture */ + + if (rmode != RM_CENTILE) { +@@ -122,15 +123,15 @@ for (i=ay; i < (int) eHIGH; i+=h) { for (j=ax; j < (int) eWIDE; j+=w) { /* if image goes off tmpPix, only draw subimage */ @@ -24730,8 +36135,16 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c x, y, (u_int) w1, (u_int) h1); } } -@@ -140,7 +140,7 @@ +@@ -138,9 +139,15 @@ + else if (rmode == RM_CSOLID) { } + ++ else if (rmode == RM_UPLEFT) { ++ ++ XPutImage(theDisp, tmpPix, theGC, theImage, 0,0, 0,0, ++ (u_int) eWIDE, (u_int) eHIGH); ++ } ++ else if (rmode == RM_CWARP) { /* warp effect */ XSetForeground(theDisp, theGC, rootfg); - for (i=0; i<=dispWIDE; i+=8) @@ -24739,7 +36152,7 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c XDrawLine(theDisp,tmpPix,theGC, i,0, (int) dispWIDE-i,(int) dispHIGH); for (i=0; i<=dispHIGH; i+=8) XDrawLine(theDisp,tmpPix,theGC, 0,i, (int) dispWIDE, (int) dispHIGH-i); -@@ -150,16 +150,16 @@ +@@ -150,16 +157,16 @@ XSetForeground(theDisp, theGC, rootfg); for (i=k=0; i<dispHIGH; i+=20,k++) { XDrawLine(theDisp, tmpPix, theGC, 0, i, (int) dispWIDE, i); @@ -24754,13 +36167,13 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c - if (rmode != RM_CENTILE) - XPutImage(theDisp, tmpPix, theGC, theImage, 0,0, - ((int) dispWIDE-eWIDE)/2, ((int) dispHIGH-eHIGH)/2, -+ if (rmode != RM_CENTILE) ++ if ((rmode != RM_CENTILE) && (rmode != RM_UPLEFT)) + XPutImage(theDisp, tmpPix, theGC, theImage, 0,0, + ((int) dispWIDE-eWIDE)/2, ((int) dispHIGH-eHIGH)/2, (u_int) eWIDE, (u_int) eHIGH); } -@@ -172,7 +172,7 @@ +@@ -172,7 +179,7 @@ if (dispWIDE == eWIDE) { /* horizontal center line */ int y, ay; @@ -24769,7 +36182,7 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c y = eHIGH - ((dispHIGH/2)%eHIGH); /* Starting point in picture to copy */ ay = 0; /* Vertical anchor point */ while (ay < dispHIGH) { -@@ -189,7 +189,7 @@ +@@ -189,7 +196,7 @@ else if (dispHIGH == eHIGH) { /* vertical centerline */ int x, ax; @@ -24778,7 +36191,7 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c x = eWIDE - ((dispWIDE/2)%eWIDE); /* Starting point in picture to copy */ ax = 0; /* Horizontal anchor point */ while (ax < dispWIDE) { -@@ -206,10 +206,10 @@ +@@ -206,10 +213,10 @@ else { /* vertical and horizontal centerlines */ int x,y, ax,ay; @@ -24791,7 +36204,7 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c while (ay < dispHIGH) { x = eWIDE - ((dispWIDE/2)%eWIDE);/* Starting point in picture to cpy */ ax = 0; /* Horizontal anchor point */ -@@ -276,8 +276,8 @@ +@@ -276,8 +283,8 @@ gc_init.foreground = BlackPixel(theDisp, theScreen); gc_init.background = WhitePixel(theDisp, theScreen); gc = XCreateGC(theDisp, vrootW, GCForeground|GCBackground, &gc_init); @@ -24802,7 +36215,7 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c (unsigned int) DefaultDepth(theDisp, theScreen)); XCopyPlane(theDisp, bitmap, pix, gc, 0,0, root_weave_width, -@@ -333,8 +333,8 @@ +@@ -333,8 +340,8 @@ prop = XInternAtom(theDisp, "_XSETROOT_ID", True); if (prop == None) return; /* no old pixmap to kill */ @@ -24813,15 +36226,15 @@ diff -ruN xv-3.10a/xvroot.c xv-3.10a-bugfixes/xvroot.c &after, &data) == Success) { if (type==XA_PIXMAP && format==32 && length==1 && after==0 && data) { -@@ -348,4 +348,4 @@ +@@ -348,4 +355,4 @@ - + -diff -ruN xv-3.10a/xvscrl.c xv-3.10a-bugfixes/xvscrl.c +diff -ru xv-3.10a/xvscrl.c xv-3.10a-enhancements/xvscrl.c --- xv-3.10a/xvscrl.c 1994-12-22 14:34:41.000000000 -0800 -+++ xv-3.10a-bugfixes/xvscrl.c 2004-05-16 18:04:25.000000000 -0700 ++++ xv-3.10a-enhancements/xvscrl.c 2004-05-16 18:07:56.000000000 -0700 @@ -1,4 +1,4 @@ -/* +/* @@ -25048,9 +36461,9 @@ diff -ruN xv-3.10a/xvscrl.c xv-3.10a-bugfixes/xvscrl.c } } -diff -ruN xv-3.10a/xvsmooth.c xv-3.10a-bugfixes/xvsmooth.c +diff -ru xv-3.10a/xvsmooth.c xv-3.10a-enhancements/xvsmooth.c --- xv-3.10a/xvsmooth.c 1994-12-22 14:34:42.000000000 -0800 -+++ xv-3.10a-bugfixes/xvsmooth.c 2004-05-16 18:04:28.000000000 -0700 ++++ xv-3.10a-enhancements/xvsmooth.c 2004-05-16 18:07:59.000000000 -0700 @@ -4,11 +4,11 @@ * Contains: * byte *SmoothResize(src8, swide, shigh, dwide, dhigh, @@ -25102,7 +36515,7 @@ diff -ruN xv-3.10a/xvsmooth.c xv-3.10a-bugfixes/xvsmooth.c /***************************************************/ -@@ -83,23 +83,23 @@ +@@ -83,29 +83,29 @@ bperpix = (is24) ? 3 : 1; /* decide which smoothing routine to use based on type of expansion */ @@ -25131,19 +36544,35 @@ diff -ruN xv-3.10a/xvsmooth.c xv-3.10a-bugfixes/xvsmooth.c 0,0 = middle of pixel */ /* we can save a lot of time by precomputing cxtab[] and pxtab[], both -@@ -115,10 +115,10 @@ + dwide arrays of ints that contain values for the equations: + cx = (ex * swide) / dwide; +- px = ((ex * swide * 100) / dwide) - (cx * 100) - 50; */ ++ px = ((ex * swide * 128) / dwide) - (cx * 128) - 64; */ + + cxtab = (int *) malloc(dwide * sizeof(int)); + if (!cxtab) { free(pic24); return NULL; } +@@ -115,17 +115,17 @@ for (ex=0; ex<dwide; ex++) { cxtab[ex] = (ex * swide) / dwide; - pxtab[ex] = (((ex * swide)* 100) / dwide) -+ pxtab[ex] = (((ex * swide)* 100) / dwide) - - (cxtab[ex] * 100) - 50; +- - (cxtab[ex] * 100) - 50; ++ pxtab[ex] = (((ex * swide)* 128) / dwide) ++ - (cxtab[ex] * 128) - 64; } - + for (ey=0; ey<dhigh; ey++) { byte *pptr, rA, gA, bA, rB, gB, bB, rC, gC, bC, rD, gD, bD; + ProgressMeter(0, (dhigh)-1, ey, "Smooth"); + + cy = (ey * shigh) / dhigh; +- py = (((ey * shigh) * 100) / dhigh) - (cy * 100) - 50; ++ py = (((ey * shigh) * 128) / dhigh) - (cy * 128) - 64; + if (py<0) { y1 = cy-1; if (y1<0) y1=0; } + else { y1 = cy+1; if (y1>shigh-1) y1=shigh-1; } + @@ -162,7 +162,7 @@ cC = pic824[cyOff + x1]; /* left/right center pixel */ cD = pic824[cyOff + cx]; /* center pixel */ @@ -25153,34 +36582,50 @@ diff -ruN xv-3.10a/xvsmooth.c xv-3.10a-bugfixes/xvsmooth.c /* quick check */ if (!is24 && cA == cB && cB == cC && cC == cD) { /* set this pixel to the same color as in pic8 */ -@@ -178,30 +178,30 @@ - pD = 100 - (pA + pB + pC); +@@ -172,36 +172,36 @@ + else { + /* compute weighting factors */ + apx = abs(px); apy = abs(py); +- pA = (apx * apy) / 100; +- pB = (apy * (100 - apx)) / 100; +- pC = (apx * (100 - apy)) / 100; +- pD = 100 - (pA + pB + pC); ++ pA = (apx * apy) >> 7; /* div 128 */ ++ pB = (apy * (128 - apx)) >> 7; /* div 128 */ ++ pC = (apx * (128 - apy)) >> 7; /* div 128 */ ++ pD = 128 - (pA + pB + pC); if (is24) { - *pp++ = ((int) (pA * rA))/100 + ((int) (pB * rB))/100 + -+ *pp++ = ((int) (pA * rA))/100 + ((int) (pB * rB))/100 + - ((int) (pC * rC))/100 + ((int) (pD * rD))/100; +- ((int) (pC * rC))/100 + ((int) (pD * rD))/100; ++ *pp++ = (((int) (pA * rA))>>7) + (((int) (pB * rB))>>7) + ++ (((int) (pC * rC))>>7) + (((int) (pD * rD))>>7); - *pp++ = ((int) (pA * gA))/100 + ((int) (pB * gB))/100 + -+ *pp++ = ((int) (pA * gA))/100 + ((int) (pB * gB))/100 + - ((int) (pC * gC))/100 + ((int) (pD * gD))/100; +- ((int) (pC * gC))/100 + ((int) (pD * gD))/100; ++ *pp++ = (((int) (pA * gA))>>7) + (((int) (pB * gB))>>7) + ++ (((int) (pC * gC))>>7) + (((int) (pD * gD))>>7); - *pp++ = ((int) (pA * bA))/100 + ((int) (pB * bB))/100 + -+ *pp++ = ((int) (pA * bA))/100 + ((int) (pB * bB))/100 + - ((int) (pC * bC))/100 + ((int) (pD * bD))/100; +- ((int) (pC * bC))/100 + ((int) (pD * bD))/100; ++ *pp++ = (((int) (pA * bA))>>7) + (((int) (pB * bB))>>7) + ++ (((int) (pC * bC))>>7) + (((int) (pD * bD))>>7); } else { /* 8-bit pic */ - *pp++ = ((int) (pA * rmap[cA]))/100 + ((int)(pB * rmap[cB]))/100 + -+ *pp++ = ((int) (pA * rmap[cA]))/100 + ((int)(pB * rmap[cB]))/100 + - ((int) (pC * rmap[cC]))/100 + ((int)(pD * rmap[cD]))/100; +- ((int) (pC * rmap[cC]))/100 + ((int)(pD * rmap[cD]))/100; ++ *pp++ = (((int)(pA * rmap[cA]))>>7) + (((int)(pB * rmap[cB]))>>7) + ++ (((int)(pC * rmap[cC]))>>7) + (((int)(pD * rmap[cD]))>>7); - *pp++ = ((int) (pA * gmap[cA]))/100 + ((int)(pB * gmap[cB]))/100 + -+ *pp++ = ((int) (pA * gmap[cA]))/100 + ((int)(pB * gmap[cB]))/100 + - ((int) (pC * gmap[cC]))/100 + ((int)(pD * gmap[cD]))/100; +- ((int) (pC * gmap[cC]))/100 + ((int)(pD * gmap[cD]))/100; ++ *pp++ = (((int)(pA * gmap[cA]))>>7) + (((int)(pB * gmap[cB]))>>7) + ++ (((int)(pC * gmap[cC]))>>7) + (((int)(pD * gmap[cD]))>>7); - *pp++ = ((int)(pA * bmap[cA]))/100 + ((int)(pB * bmap[cB]))/100 + -+ *pp++ = ((int)(pA * bmap[cA]))/100 + ((int)(pB * bmap[cB]))/100 + - ((int)(pC * bmap[cC]))/100 + ((int)(pD * bmap[cD]))/100; +- ((int)(pC * bmap[cC]))/100 + ((int)(pD * bmap[cD]))/100; ++ *pp++ = (((int)(pA * bmap[cA]))>>7) + (((int)(pB * bmap[cB]))>>7) + ++ (((int)(pC * bmap[cC]))>>7) + (((int)(pD * bmap[cD]))>>7); } } } @@ -25449,10 +36894,19 @@ diff -ruN xv-3.10a/xvsmooth.c xv-3.10a-bugfixes/xvsmooth.c *np = rb | (gb>>3) | (bb>>6); -diff -ruN xv-3.10a/xvsunras.c xv-3.10a-bugfixes/xvsunras.c +diff -ru xv-3.10a/xvsunras.c xv-3.10a-enhancements/xvsunras.c --- xv-3.10a/xvsunras.c 1994-12-22 14:34:42.000000000 -0800 -+++ xv-3.10a-bugfixes/xvsunras.c 2005-04-02 18:04:20.000000000 -0800 -@@ -54,8 +54,8 @@ ++++ xv-3.10a-enhancements/xvsunras.c 2007-05-13 17:46:42.000000000 -0700 +@@ -39,7 +39,7 @@ + #define RAS_RLE 0x80 + + +-static int sunRasError PARM((char *, char *)); ++static int sunRasError PARM((const char *, const char *)); + static int rle_read PARM((byte *, int, int, FILE *, int)); + static void sunRas1to8 PARM((byte *, byte *, int)); + static void sunRas8to1 PARM((byte *, byte *, int, int)); +@@ -54,10 +54,10 @@ PICINFO *pinfo; { FILE *fp; @@ -25461,7 +36915,10 @@ diff -ruN xv-3.10a/xvsunras.c xv-3.10a-bugfixes/xvsunras.c + int linesize,lsize,csize,isize,i,w,h,d,npixels,nbytes; + byte *image, *line; struct rasterfile sunheader; - char *bname; +- char *bname; ++ const char *bname; + + bname = BaseName(fname); @@ -85,7 +85,7 @@ sunheader.ras_depth != 8 && @@ -25586,6 +37043,15 @@ diff -ruN xv-3.10a/xvsunras.c xv-3.10a-bugfixes/xvsunras.c pinfo->h = h; pinfo->normw = pinfo->w; pinfo->normh = pinfo->h; pinfo->frmType = F_SUNRAS; +@@ -285,7 +318,7 @@ + + /*****************************/ + static int sunRasError(fname, st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; @@ -364,10 +397,15 @@ /* special case: if PIC24 and writing GREYSCALE, write 8-bit file */ @@ -25656,9 +37122,9 @@ diff -ruN xv-3.10a/xvsunras.c xv-3.10a-bugfixes/xvsunras.c /* write the image */ -diff -ruN xv-3.10a/xvtarga.c xv-3.10a-bugfixes/xvtarga.c +diff -ru xv-3.10a/xvtarga.c xv-3.10a-enhancements/xvtarga.c --- xv-3.10a/xvtarga.c 1994-12-22 14:34:55.000000000 -0800 -+++ xv-3.10a-bugfixes/xvtarga.c 2005-03-31 07:33:07.000000000 -0800 ++++ xv-3.10a-enhancements/xvtarga.c 2007-05-13 17:51:18.000000000 -0700 @@ -17,8 +17,8 @@ * 0: * 1: colormap type @@ -25679,6 +37145,15 @@ diff -ruN xv-3.10a/xvtarga.c xv-3.10a-bugfixes/xvtarga.c */ +@@ -36,7 +36,7 @@ + #include "xv.h" + + static long filesize; +-static char *bname; ++static const char *bname; + + + /*******************************************/ @@ -48,7 +48,7 @@ /* returns '1' on success */ @@ -25735,9 +37210,9 @@ diff -ruN xv-3.10a/xvtarga.c xv-3.10a-bugfixes/xvtarga.c putc(w&0xff, fp); putc((w>>8)&0xff,fp); putc(h&0xff, fp); -diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c +diff -ru xv-3.10a/xvtext.c xv-3.10a-enhancements/xvtext.c --- xv-3.10a/xvtext.c 1995-01-13 15:46:28.000000000 -0800 -+++ xv-3.10a-bugfixes/xvtext.c 2004-05-16 18:04:38.000000000 -0700 ++++ xv-3.10a-enhancements/xvtext.c 2007-05-13 14:25:59.000000000 -0700 @@ -1,6 +1,6 @@ /* * xvtext.c - text file display window routines @@ -25746,19 +37221,247 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c * includes: * void CreateTextWins(geom, cmtgeom); * void OpenTextView(text, textlen, title, freeonclose); -@@ -98,8 +98,7 @@ +@@ -19,9 +19,13 @@ + #include "copyright.h" + + #include "xv.h" ++#ifdef TV_MULTILINGUAL ++#include "xvml.h" ++#endif + +- +-#define BUTTW 80 ++#define BUTTW1 80 ++#define BUTTW2 60 ++#define BUTTW3 110 + #define BUTTH 24 + + #define TOPMARGIN 30 /* from top of window to top of text window */ +@@ -36,19 +40,36 @@ + #define TV_ASCII 0 + #define TV_HEX 1 + #define TV_CLOSE 2 +-#define TV_NBUTTS 3 + ++#define TV_E_NBUTTS 3 ++ ++#ifdef TV_L10N ++# define TV_RESCAN 3 ++# define TV_USASCII 4 ++# define TV_JIS 5 ++# define TV_EUCJ 6 ++# define TV_MSCODE 7 ++ ++# define TV_J_NBUTTS 8 ++#endif + + #define TITLELEN 128 + ++#ifdef TV_MULTILINGUAL ++struct coding_spec { ++ struct coding_system coding_system; ++ char *(*converter)PARM((char *, int, int *)); ++}; ++#endif ++ + /* data needed per text window */ + typedef struct { Window win, textW; + int vis, wasvis; +- char *text; /* text to be displayed */ ++ const char *text; /* text to be displayed */ + int freeonclose; /* free text when closing win */ + int textlen; /* length of text */ + char title[TITLELEN]; /* name of file being displayed */ +- char **lines; /* ptr to array of line ptrs */ ++ const char **lines; /* ptr to array of line ptrs */ + int numlines; /* # of lines in text */ + int hexlines; /* # of lines in HEX mode */ + int maxwide; /* length of longest line (ascii) */ +@@ -57,16 +78,89 @@ + int chwide, chhigh; /* size of textW, in chars */ + int hexmode; /* true if disp Hex, else Ascii */ + SCRL vscrl, hscrl; +- BUTT but[TV_NBUTTS], nopBut; ++#ifdef TV_L10N ++ int code; /* current character code */ ++ BUTT but[TV_J_NBUTTS], nopBut; ++#else ++ BUTT but[TV_E_NBUTTS], nopBut; ++#endif ++#ifdef TV_MULTILINGUAL ++/* int codeset; */ ++ struct coding_spec ccs; /* current coding_spec */ ++ BUTT csbut; ++ char *cv_text; ++ int cv_len; ++ struct context *ctx; ++ struct ml_text *txt; ++ struct csinfo_t *cs; ++#endif + } TVINFO; + + + static TVINFO tinfo[MAXTVWIN]; + static int hasBeenSized = 0; + static int haveWindows = 0; ++static int nbutts; /* # of buttons */ + static int mfwide, mfhigh, mfascent; /* size of chars in mono font */ + static int *event_retP, *event_doneP; /* used in tvChkEvent() */ +- ++#ifdef TV_MULTILINGUAL ++# define TV_PLAIN 0 ++# define TV_ISO_8859_1 1 ++# define TV_ISO_2022_JP 2 ++# define TV_EUC_JAPAN 3 ++# define TV_ISO_2022_INT_1 4 ++# define TV_ISO_2022_KR 5 ++# define TV_EUC_KOREA 6 ++# define TV_ISO_2022_SS2_8 7 ++# define TV_ISO_2022_SS2_7 8 ++# define TV_SHIFT_JIS 9 ++# define TV_NCSS 10 ++static char *codeSetNames[TV_NCSS] = { ++ "plain", ++ "iso-8859-1", ++ "iso-2022-jp", ++ "euc-japan", ++ "iso-2022-int-1", ++ "iso-2022-kr", ++ "euc-korea", ++ "iso-2022-ss2-8", ++ "iso-2022-ss2-7", ++ "Shift JIS", ++}; ++static struct coding_spec coding_spec[TV_NCSS] = { ++ /* --- G0 --- --- G1 --- --- G2 --- --- G3 --- GL GR EOL SF LS */ ++ /* plain */ ++ {{{{ 1,94,'B'}, { 1,94,'B'}, { 1,94,'B'}, { 1,94,'B'}}, 0, 0, 0, 1, 1}, ++ NULL}, ++ /* iso-8859-1 */ ++ {{{{ 1,94,'B'}, { 1,96,'A'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 0, 0}, ++ NULL}, ++ /* iso-2022-jp */ ++ {{{{ 1,94,'B'}, {-1,94,'B'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 0, 0, 1, 0}, ++ NULL}, ++ /* euc-japan */ ++ {{{{ 1,94,'B'}, { 2,94,'B'}, { 1,94,'J'}, { 2,94,'D'}}, 0, 1, 0, 1, 0}, ++ NULL}, ++ /* iso-2022-int-1 */ ++ {{{{ 1,94,'B'}, { 2,94,'C'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 1, 1}, ++ NULL}, ++ /* iso-2022-kr */ ++ {{{{ 1,94,'B'}, { 2,94,'C'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 0, 1}, ++ NULL}, ++ /* euc-korea */ ++ {{{{ 1,94,'B'}, { 2,94,'C'}, {-1,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 0, 0}, ++ NULL}, ++ /* iso-2022-ss2-8 */ ++ {{{{ 1,94,'B'}, {-1,94,'C'}, { 0,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 0, 0}, ++ NULL}, ++ /* iso-2022-ss2-7 */ ++ {{{{ 1,94,'B'}, {-1,94,'C'}, { 0,94,'B'}, {-1,94,'B'}}, 0, 1, 0, 1, 0}, ++ NULL}, ++ /* shift jis */ ++ {{{{ 1,94,'B'}, { 2,94,'B'}, { 1,94,'J'}, { 2,94,'D'}}, 0, 1, 1, 1, 0}, ++ sjis_to_jis}, ++}; ++#endif + + static void closeText PARM((TVINFO *)); + static int tvChkEvent PARM((TVINFO *, XEvent *)); +@@ -82,7 +176,15 @@ + static void textKey PARM((TVINFO *, int)); + static void doHexAsciiCmd PARM((TVINFO *, int)); + static void computeText PARM((TVINFO *)); +- ++#ifdef TV_L10N ++static int selectCodeset PARM((TVINFO *)); ++#endif ++#ifdef TV_MULTILINGUAL ++static void setCodingSpec PARM((TVINFO *, struct coding_spec *)); ++static void createCsWins PARM((char *)); ++static void openCsWin PARM((TVINFO *)); ++static void closeCsWin PARM((TVINFO *)); ++#endif + + /* HEXMODE output looks like this: + 0x00000000: 00 11 22 33 44 55 66 77 - 88 99 aa bb cc dd ee ff 0123456789abcdef +@@ -92,19 +194,57 @@ + + /***************************************************************/ + void CreateTextWins(geom, cmtgeom) +- char *geom, *cmtgeom; ++ const char *geom, *cmtgeom; + { + int i, defwide, defhigh, cmthigh; XSizeHints hints; XSetWindowAttributes xswa; TVINFO *tv; - int gx,gy,gw,gh,gset,gx1,gy1; - ++#ifdef TV_MULTILINGUAL ++ int default_codeset; ++#endif ++ ++#ifdef TV_L10N ++ if (!xlocale) { ++#endif ++ mfwide = monofinfo->max_bounds.width; ++ mfhigh = monofinfo->ascent + monofinfo->descent; ++ mfascent = monofinfo->ascent; + ++ nbutts = TV_E_NBUTTS; /* # of buttons */ ++#ifdef TV_L10N ++ } ++ else { ++ mfwide = monofsetinfo->max_logical_extent.width / 2; /* shit! */ ++ mfhigh = monofsetinfo->max_logical_extent.height + 1; ++ mfascent = mfhigh; + +- mfwide = monofinfo->max_bounds.width; +- mfhigh = monofinfo->ascent + monofinfo->descent; +- mfascent = monofinfo->ascent; ++ nbutts = TV_J_NBUTTS; /* # of buttons */ ++ } ++#endif - mfwide = monofinfo->max_bounds.width; - mfhigh = monofinfo->ascent + monofinfo->descent; -@@ -120,10 +119,10 @@ ++#ifdef TV_MULTILINGUAL ++ { ++ char *dc = XGetDefault(theDisp, "xv", "codeSet"); ++ if (dc == NULL) ++ default_codeset = TV_DEFAULT_CODESET; ++ else { ++ for (i = 0; i < TV_NCSS; i++) { ++ if (strcmp(dc, codeSetNames[i]) == 0) ++ break; ++ } ++ if (i >= TV_NCSS) { ++ if (strcmp(dc, "iso-2022") == 0) ++ default_codeset = TV_PLAIN; ++ else { ++ SetISTR(ISTR_WARNING, "%s: unknown codeset.", dc); ++ default_codeset = TV_PLAIN; ++ } ++ } else ++ default_codeset = i; ++ } ++ } ++#endif + /* compute default size of textview windows. should be big enough to + hold an 80x24 text window */ + +@@ -119,11 +259,19 @@ + for (i=0; i<MAXTVWIN; i++) { tv = &tinfo[i]; ++#ifdef TV_MULTILINGUAL ++ tv->ctx = ml_create_context(ScreenOfDisplay(theDisp, theScreen)); ++ tv->txt = NULL; ++ tv->cv_text = NULL; ++ tv->cv_len = 0; ++ ml_set_charsets(tv->ctx, &coding_spec[TV_PLAIN].coding_system); ++#endif ++ tv->win = CreateWindow((i<CMTWIN) ? "xv text viewer" : "xv image comments", - "XVtextview", - (i<CMTWIN) ? geom : cmtgeom, @@ -25771,7 +37474,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c infofg, infobg, 1); if (!tv->win) FatalError("can't create textview window!"); -@@ -135,17 +134,17 @@ +@@ -135,17 +283,17 @@ /* note: everything is sized and positioned in resizeText() */ @@ -25793,16 +37496,67 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c hints.flags |= PMinSize; else hints.flags = PMinSize; -@@ -162,7 +161,7 @@ +@@ -162,74 +310,115 @@ XSelectInput(theDisp, tv->textW, ExposureMask | ButtonPressMask); - +- BTCreate(&(tv->but[TV_ASCII]), tv->win, 0,0,BUTTW,BUTTH, + - BTCreate(&(tv->but[TV_ASCII]), tv->win, 0,0,BUTTW,BUTTH, ++ BTCreate(&(tv->but[TV_ASCII]), tv->win, 0,0,BUTTW1,BUTTH, "Ascii",infofg,infobg,hicol,locol); - BTCreate(&(tv->but[TV_HEX]), tv->win, 0,0,BUTTW,BUTTH, -@@ -185,7 +184,7 @@ +- BTCreate(&(tv->but[TV_HEX]), tv->win, 0,0,BUTTW,BUTTH, ++ BTCreate(&(tv->but[TV_HEX]), tv->win, 0,0,BUTTW1,BUTTH, + "Hex",infofg,infobg,hicol,locol); +- BTCreate(&(tv->but[TV_CLOSE]), tv->win, 0,0,BUTTW,BUTTH, ++ BTCreate(&(tv->but[TV_CLOSE]), tv->win, 0,0,BUTTW1,BUTTH, + "Close",infofg,infobg,hicol,locol); + ++#ifdef TV_L10N ++ if (xlocale) { ++ BTCreate(&(tv->but[TV_RESCAN]), tv->win, 0,0,BUTTW2,BUTTH, ++ "RESCAN",infofg,infobg,hicol,locol); ++ BTCreate(&(tv->but[TV_USASCII]), tv->win, 0,0,BUTTW2,BUTTH, ++ "ASCII",infofg,infobg,hicol,locol); ++ BTCreate(&(tv->but[TV_JIS]), tv->win, 0,0,BUTTW2,BUTTH, ++ "JIS",infofg,infobg,hicol,locol); ++ BTCreate(&(tv->but[TV_EUCJ]), tv->win, 0,0,BUTTW2,BUTTH, ++ "EUC-j",infofg,infobg,hicol,locol); ++ BTCreate(&(tv->but[TV_MSCODE]), tv->win, 0,0,BUTTW2,BUTTH, ++ "MS Kanji",infofg,infobg,hicol,locol); ++ } ++#endif ++ + BTCreate(&(tv->nopBut), tv->win, 0,0, (u_int) tv->vscrl.tsize+1, + (u_int) tv->vscrl.tsize+1, "", infofg, infobg, hicol, locol); + tv->nopBut.active = 0; + + XMapSubwindows(theDisp, tv->win); + ++#ifdef TV_MULTILINGUAL ++ BTCreate(&tv->csbut, tv->win, 0, 0, BUTTW1, BUTTH, "Code Sets", ++ infofg, infobg, hicol, locol); ++#endif ++ + tv->text = (char *) NULL; + tv->textlen = 0; + tv->title[0] = '\0'; ++#ifdef TV_L10N ++ tv->code = (xlocale ? LOCALE_DEFAULT : 0); ++#endif ++#ifdef TV_MULTILINGUAL ++ tv->ccs = coding_spec[default_codeset]; ++#endif + } +- ++#ifdef TV_MULTILINGUAL ++ get_monofont_size(&mfwide, &mfhigh); ++ /* recalculate sizes. */ ++ defwide = 80 * mfwide + 2*LRMARGINS + 8 + 20; /* -ish */ ++ defhigh = 24 * mfhigh + TOPMARGIN + BOTMARGIN + 8 + 20; /* ish */ ++ cmthigh = 6 * mfhigh + TOPMARGIN + BOTMARGIN + 8 + 20; /* ish */ ++#endif + for (i=0; i<MAXTVWIN; i++) { resizeText(&tinfo[i], defwide, (i<CMTWIN) ? defhigh : cmthigh); @@ -25811,34 +37565,106 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c KeyPressMask | StructureNotifyMask); } -@@ -200,7 +199,6 @@ + hasBeenSized = 1; /* we can now start looking at textview events */ + ++#ifdef TV_MULTILINGUAL ++ createCsWins("+100+100"); ++#endif + } + + + /***************************************************************/ +-void TextView(fname) +- char *fname; ++int TextView(fname) ++ const char *fname; { /* given a filename, attempts to read in the file and open a textview win */ - int i; ++ int filetype; long textlen; char *text, buf[512], title[128], rfname[MAXPATHLEN+1]; char *basefname[128]; /* just current fname, no path */ -@@ -222,7 +220,7 @@ - if (!UncompressFile(basefname, rfname)) return;/* failed to uncompress */ + FILE *fp; ++ char filename[MAXPATHLEN+1]; ++ ++ strncpy(filename, fname, sizeof(filename) - 1); ++#ifdef AUTO_EXPAND ++ Mkvdir(filename); ++ Dirtovd(filename); ++#endif + + basefname[0] = '\0'; +- strcpy(rfname, fname); ++ strncpy(rfname, filename, sizeof(rfname) - 1); + + /* see if this file is compressed. if it is, uncompress it, and view + the uncompressed version */ + +- if (ReadFileType(fname) == RFT_COMPRESS) { ++ filetype = ReadFileType(filename); ++ if ((filetype == RFT_COMPRESS) || (filetype == RFT_BZIP2)) { + #ifndef VMS +- if (!UncompressFile(fname, rfname)) return; /* failed to uncompress */ ++ if (!UncompressFile(filename, rfname, filetype)) return FALSE; + #else + /* chop off trailing '.Z' from friendly displayed basefname, if any */ +- strcpy (basefname, fname); ++ strncpy (basefname, filename, 128 - 1); + *rindex (basefname, '.') = '\0'; +- if (!UncompressFile(basefname, rfname)) return;/* failed to uncompress */ ++ if (!UncompressFile(basefname, rfname, filetype)) return FALSE; #endif } - -+ - +- fp = fopen(rfname, "r"); -@@ -246,7 +244,7 @@ + if (!fp) { + sprintf(buf,"Couldn't open '%s': %s", rfname, ERRSTR(errno)); + ErrPopUp(buf,"\nOh well"); +- return; ++ return FALSE; + } + - text = (char *) malloc((size_t) textlen); +@@ -241,16 +430,16 @@ + sprintf(buf, "File '%s' contains no data. (Zero length file.)", rfname); + ErrPopUp(buf, "\nOk"); + fclose(fp); +- return; ++ return FALSE; + } + +- text = (char *) malloc((size_t) textlen); ++ text = (char *) malloc((size_t) textlen + 1); if (!text) { - sprintf(buf, "Couldn't malloc %ld bytes to read file '%s'", + sprintf(buf, "Couldn't malloc %ld bytes to read file '%s'", textlen, rfname); ErrPopUp(buf, "\nSo what!"); fclose(fp); -@@ -267,8 +265,8 @@ +- return; ++ return FALSE; + } + + if (fread(text, (size_t) 1, (size_t) textlen, fp) != textlen) { +@@ -258,6 +447,9 @@ + rfname); + ErrPopUp(buf, "\nHmm..."); + } ++#ifdef TV_MULTILINGUAL ++ text[textlen] = '\0'; ++#endif + + fclose(fp); + +@@ -265,27 +457,28 @@ + OpenTextView(text, (int) textlen, title, 1); + /* note: text gets freed when window gets closed */ ++ return TRUE; } - @@ -25847,8 +37673,10 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c + /***************************************************************/ void OpenTextView(text, len, title, freeonclose) - char *text, *title; -@@ -276,7 +274,6 @@ +- char *text, *title; +- int len, freeonclose; ++ const char *text, *title; ++ int len, freeonclose; { /* opens up a textview window */ @@ -25856,7 +37684,20 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c TVINFO *tv; tv = &tinfo[0]; -@@ -293,6 +290,7 @@ + + /* kill off old text info */ +- if (tv->freeonclose && tv->text) free(tv->text); ++ if (tv->freeonclose && tv->text) free((void *)tv->text); + if (tv->lines) free(tv->lines); +- tv->text = (char *) NULL; +- tv->lines = (char **) NULL; ++ ++ tv->text = (const char *) NULL; ++ tv->lines = (const char **) NULL; + tv->numlines = tv->textlen = tv->hexmode = 0; + + +@@ -293,6 +486,7 @@ tv->textlen = len; tv->freeonclose = freeonclose; strncpy(tv->title, title, (size_t) TITLELEN-1); @@ -25864,7 +37705,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c computeText(tv); /* compute # lines and linestarts array */ -@@ -316,7 +314,6 @@ +@@ -316,7 +510,6 @@ { /* opens up the reserved 'comment' textview window */ @@ -25872,7 +37713,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c TVINFO *tv; tv = &tinfo[CMTWIN]; -@@ -351,9 +348,9 @@ +@@ -351,9 +544,9 @@ tv->textlen = (tv->text) ? strlen(tv->text) : 0; tv->freeonclose = 0; @@ -25884,16 +37725,27 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c sprintf(tv->title, "<no file loaded>"); computeText(tv); /* compute # lines and linestarts array */ -@@ -504,7 +501,7 @@ - if (tv->freeonclose && tv->text) free(tv->text); +@@ -501,12 +694,16 @@ + if (i==MAXTEXTWIN) anyTextUp = 0; + + /* free all info for this textview window */ +- if (tv->freeonclose && tv->text) free(tv->text); ++ if (tv->freeonclose && tv->text) free((void *)tv->text); if (tv->lines) free(tv->lines); - tv->text = (char *) NULL; -+ tv->text = (char *) NULL; - tv->lines = (char **) NULL; +- tv->lines = (char **) NULL; ++ tv->text = (const char *) NULL; ++ tv->lines = (const char **) NULL; tv->numlines = tv->textlen = tv->hexmode = 0; ++ ++#ifdef TV_MULTILINGUAL ++ closeCsWin(tv); ++#endif } -@@ -518,7 +515,7 @@ + + +@@ -518,7 +715,7 @@ /* checks event to see if it's a text-window related thing. If it is, it eats the event and returns '1', otherwise '0'. */ @@ -25902,7 +37754,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c rv = 1; -@@ -560,7 +557,7 @@ +@@ -560,7 +757,7 @@ count++; } while (XCheckWindowEvent(theDisp, evt.xexpose.window, ExposureMask, &evt)); @@ -25911,7 +37763,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c XClipBox(reg, &rect); /* bounding box of region */ XSetRegion(theDisp, theGC, reg); -@@ -570,7 +567,7 @@ +@@ -570,7 +767,7 @@ fprintf(stderr,"grouped %d expose events into %d,%d %dx%d rect\n", count, rect.x, rect.y, rect.width, rect.height); } @@ -25920,7 +37772,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c if (e->window == tv->win) drawTextView(tv); else if (e->window == tv->textW) drawTextW(0, &(tv->vscrl)); -@@ -584,7 +581,7 @@ +@@ -584,7 +781,7 @@ else if (xev->type == ButtonPress) { XButtonEvent *e = (XButtonEvent *) xev; @@ -25929,7 +37781,48 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c x = e->x; y = e->y; if (e->button == Button1) { -@@ -615,7 +612,7 @@ +@@ -594,6 +791,40 @@ + else if (e->window == tv->textW) { } + else rv = 0; + } ++ else if (e->button == Button4) { /* note min vs. max, + vs. - */ ++ /* scroll regardless of where we are in the text window */ ++ if (e->window == tv->win || ++ e->window == tv->vscrl.win || ++ e->window == tv->hscrl.win || ++ e->window == tv->textW) ++ { ++ SCRL *sp=&(tv->vscrl); ++ int halfpage=sp->page/2; ++ ++ if (sp->val > sp->min+halfpage) ++ SCSetVal(sp,sp->val-halfpage); ++ else ++ SCSetVal(sp,sp->min); ++ } ++ else rv = 0; ++ } ++ else if (e->button == Button5) { /* note max vs. min, - vs. + */ ++ /* scroll regardless of where we are in the text window */ ++ if (e->window == tv->win || ++ e->window == tv->vscrl.win || ++ e->window == tv->hscrl.win || ++ e->window == tv->textW) ++ { ++ SCRL *sp=&(tv->vscrl); ++ int halfpage=sp->page/2; ++ ++ if (sp->val < sp->max-halfpage) ++ SCSetVal(sp,sp->val+halfpage); ++ else ++ SCSetVal(sp,sp->max); ++ } ++ else rv = 0; ++ } + else rv = 0; + } + +@@ -615,7 +846,7 @@ if (tv->wide != e->width || tv->high != e->height) { if (DEBUG) fprintf(stderr,"Forcing a redraw! (from configure)\n"); @@ -25938,7 +37831,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c (u_int) e->width, (u_int) e->height, True); resizeText(tv, e->width, e->height); } -@@ -633,7 +630,7 @@ +@@ -633,10 +864,12 @@ TVINFO *tv; int w,h; { @@ -25946,8 +37839,13 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c + int i, maxw, maxh; XSizeHints hints; ++#ifndef TV_MULTILINGUAL if (tv->wide == w && tv->high == h) return; /* no change in size */ -@@ -657,7 +654,7 @@ ++#endif + + if (XGetNormalHints(theDisp, tv->win, &hints)) { + hints.width = w; +@@ -657,13 +890,26 @@ tv->twWide = tv->chwide * mfwide + 6; tv->twHigh = tv->chhigh * mfhigh + 6; @@ -25955,8 +37853,29 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c + XMoveResizeWindow(theDisp, tv->textW, LRMARGINS, TOPMARGIN, (u_int) tv->twWide, (u_int) tv->twHigh); - for (i=0; i<TV_NBUTTS; i++) { -@@ -692,8 +689,8 @@ +- for (i=0; i<TV_NBUTTS; i++) { +- tv->but[i].x = tv->wide - (TV_NBUTTS-i) * (BUTTW+5); ++ for (i=0; i<TV_E_NBUTTS; i++) { ++ tv->but[i].x = tv->wide - (TV_E_NBUTTS-i) * (BUTTW1+5); + tv->but[i].y = tv->high - BUTTH - 5; + } ++#ifdef TV_MULTILINGUAL ++ tv->csbut.x = 5; ++ tv->csbut.y = tv->high - BUTTH - 5; ++#endif ++ ++#ifdef TV_L10N ++ if (xlocale) { ++ for (; i<TV_J_NBUTTS; i++) { ++ tv->but[i].x = 5 + (i-TV_E_NBUTTS) * (BUTTW2+5); ++ tv->but[i].y = tv->high - BUTTH - 5; ++ } ++ } ++#endif + + computeScrlVals(tv); + +@@ -692,8 +938,8 @@ hpag = tv->chwide / 4; vpag = tv->chhigh - 1; @@ -25967,7 +37886,37 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c 1, tv->twHigh, 0, vmax, tv->vscrl.val, vpag); SCChange(&tv->hscrl, LRMARGINS, TOPMARGIN + tv->twHigh + 1, -@@ -731,11 +728,11 @@ +@@ -714,6 +960,29 @@ + case TV_CLOSE: if (tv == &tinfo[CMTWIN]) CloseCommentText(); + else closeText(tv); + break; ++ ++#ifdef TV_L10N ++ case TV_RESCAN: ++ tv->code = selectCodeset(tv); ++ drawTextW(0, &tv->vscrl); ++ break; ++ case TV_USASCII: ++ tv->code = LOCALE_USASCII; ++ drawTextW(0, &tv->vscrl); ++ break; ++ case TV_JIS: ++ tv->code = LOCALE_JIS; ++ drawTextW(0, &tv->vscrl); ++ break; ++ case TV_EUCJ: ++ tv->code = LOCALE_EUCJ; ++ drawTextW(0, &tv->vscrl); ++ break; ++ case TV_MSCODE: ++ tv->code = LOCALE_MSCODE; ++ drawTextW(0, &tv->vscrl); ++ break; ++#endif /* TV_L10N */ + } + } + +@@ -731,11 +1000,11 @@ y = 5; XSetForeground(theDisp, theGC, infobg); @@ -25981,7 +37930,20 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c (u_int) StringWidth(tv->title)+7, (u_int) CHIGH+5); Draw3dRect(tv->win, 5+1, y+1, (u_int) StringWidth(tv->title)+5, -@@ -763,15 +760,15 @@ +@@ -748,8 +1017,10 @@ + drawNumLines(tv); + + /* draw the buttons */ +- for (i=0; i<TV_NBUTTS; i++) BTRedraw(&(tv->but[i])); +- ++ for (i=0; i<nbutts; i++) BTRedraw(&(tv->but[i])); ++#ifdef TV_MULTILINGUAL ++ BTRedraw(&tv->csbut); ++#endif + BTRedraw(&tv->nopBut); + } + +@@ -763,15 +1034,15 @@ if (tv->hexmode) nl = tv->hexlines; else { @@ -26001,7 +37963,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c nl, (nl!=1) ? "s" : ""); w = StringWidth(tmpstr) + 7; /* width of frame */ -@@ -779,13 +776,13 @@ +@@ -779,13 +1050,13 @@ y = 6; XSetForeground(theDisp, theGC, infobg); @@ -26017,7 +37979,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c R3D_IN,2,hicol,locol,infobg); XSetForeground(theDisp, theGC, infofg); -@@ -800,10 +797,10 @@ +@@ -800,10 +1071,10 @@ int x, y, w, nl; char tmpstr[64]; @@ -26031,8 +37993,24 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c nl, (nl>1) ? "s" : ""); w = StringWidth(tmpstr) + 7; /* width of frame */ -@@ -825,14 +822,14 @@ - u_char *sp, *ep, *lp; +@@ -819,20 +1090,28 @@ + int delta; + SCRL *sptr; + { +- int i, j, lnum, hpos, cpos, extrach, lwide; ++ int i, j, lnum, hpos, vpos, cpos, lwide; ++#ifndef TV_MULTILINGUAL ++ int extrach; ++#endif ++#ifdef TV_L10N ++ int desig_stat; /* for ISO 2022-JP */ ++ /* 0: ASCII, 1: JIS X 0208, 2: GL is JIS X 0201 kana */ ++#endif + TVINFO *tv; + char linestr[512]; +- u_char *sp, *ep, *lp; ++ byte *lp; ++ const byte *sp, *ep; /* figure out TVINFO pointer from SCRL pointer */ - for (i=0; i<MAXTVWIN && sptr != &tinfo[i].vscrl @@ -26048,43 +38026,254 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c TextCheckEvent() */ if (!hasBeenSized) return; -@@ -849,7 +846,7 @@ +@@ -842,14 +1121,40 @@ + XSetFont(theDisp, theGC, monofont); + + hpos = tv->hscrl.val; ++ vpos = tv->vscrl.val; + lwide = (tv->chwide < 500) ? tv->chwide : 500; + + /* draw text */ + if (!tv->hexmode) { /* ASCII mode */ ++#ifdef TV_MULTILINGUAL ++ XClearArea(theDisp, tv->textW, 0, 0, ++ (u_int) tv->twWide, (u_int) tv->twHigh, False); ++ if(tv->txt == NULL) ++ return; ++ else { ++ int i; ++ int y; ++ struct ml_text *tp = tv->txt; ++ struct ml_line *lp2; ++ ++ XSetFunction(theDisp, theGC, GXcopy); ++ XSetClipMask(theDisp, theGC, None); ++ y = 3; ++ for (lp2 = &tp->lines[vpos], i = tp->nlines - vpos; ++ i > 0; lp2++, i--) { ++ XDrawText16(theDisp, tv->textW, theGC, ++ -mfwide * hpos + 3, y + lp2->ascent, ++ lp2->items, lp2->nitems); ++ y += lp2->ascent + lp2->descent; ++ if (y > tv->twHigh) ++ break; ++ } ++ } ++#else for (i=0; i<tv->chhigh; i++) { /* draw each line */ - lnum = i + tv->vscrl.val; +- lnum = i + tv->vscrl.val; ++ lnum = i + vpos; if (lnum < tv->numlines-1) { - + /* find start of displayed portion of line. This is *wildly* complicated by the ctrl-character and tab expansion... */ -@@ -902,7 +899,7 @@ +@@ -868,7 +1173,13 @@ + cpos--; sp++; + } + else if (*sp < 32) extrach = 1; ++ ++#ifdef TV_L10N ++ else if (!tv->code && *sp > 127) extrach = 3; ++#else + else if (*sp > 127) extrach = 3; ++#endif ++ + else sp++; + } + else { +@@ -884,6 +1195,10 @@ + + /* build up the linestr buffer, which is the current line, padded + with blanks to a width of exactly tv->chwide chars */ ++#ifdef TV_L10N ++ desig_stat = 0; /* for ISO 2022-JP */ ++ /* 0: ASCII, 1: JIS X 0208, 2: GL is JIS X 0201 kana */ ++#endif + for (cpos=0, lp=(byte *) linestr; cpos<lwide; cpos++, lp++) { + if (sp>=ep) *lp = ' '; + else { +@@ -897,13 +1212,117 @@ + cpos--; lp--; sp++; + } + ++#ifdef TV_L10N ++ else if (*sp < 32 && !(tv->code == LOCALE_JIS && *sp == 0x1b)) { ++#else + else if (*sp < 32) { ++#endif + if (!extrach) extrach = 2; if (extrach == 2) *lp = '^'; else if (extrach == 1) *lp = *sp + 64; } - + ++#ifdef TV_L10N ++ /* convert to EUC-Japan */ ++ else if (tv->code == LOCALE_JIS) { ++ if (*sp == 0x1b) { /* ESC */ ++ if (*(sp+1) == '$') { ++ if (*(sp+2) == 'B' || *(sp+2) == 'A' || *(sp+2) == '@') { ++ /* ESC $ B, ESC $ A, ESC $ @ */ ++ desig_stat = 1; ++ sp += 3; cpos--; lp--; ++ } ++ else if (*(sp+2) == '(' && *(sp+3) == 'B') { ++ /* ESC $ ( B */ ++ desig_stat = 1; ++ sp += 4; cpos--; lp--; ++ } ++ } ++ else if (*(sp+1) == '(') { ++ if (*(sp+2) == 'B' || *(sp+2) == 'J' || *(sp+2) == 'H') { ++ /* ESC ( B, ESC ( J, ESC ( H */ ++ desig_stat = 0; ++ sp += 3; cpos--; lp--; ++ } ++ else if (*(sp+2) == 'I') { ++ /* ESC ( I */ ++ desig_stat = 2; ++ sp += 3; cpos--; lp--; ++ } ++ } ++ else if (*(sp+1) == ')' && *(sp+2) == 'I') { ++ /* ESC ) I */ ++ desig_stat = 2; ++ sp += 3; cpos--; lp--; ++ } ++ else { /* error */ ++ *lp = ' '; sp++; ++ } ++ } ++ ++ else { ++ switch (desig_stat) { ++ case 0: /* ASCII */ ++ *lp = *sp++; ++ break; ++ case 1: /* JIS X 0208 */ ++ *lp++ = *sp++ | 0x80; ++ *lp = *sp++ | 0x80; ++ cpos++; ++ break; ++ case 2: /* JIS X 0201 kana */ ++#if defined(__osf__) && !defined(X_LOCALE) ++ *lp = '='; sp++; ++#else ++ *lp++ = 0x8e; /* ^N | 0x80 */ ++ *lp = *sp++ | 0x80; ++#endif ++ break; ++ default: /* error */ ++ *lp = *sp++; ++ break; ++ } ++ } ++ } ++ ++ else if (tv->code == LOCALE_MSCODE) { ++ if ((*sp >= 0x81 && *sp <= 0x9f) ++ || (*sp >= 0xe0 && *sp <= 0xef)) { ++ static u_char c1, c2; ++ ++/*fprintf(stderr, "(%x,%x)->", *sp, *(sp+1));*/ ++ c1 = ((*sp - ((*sp>=0xe0) ? 0xb0 : 0x70)) << 1) ++ - ((*(sp+1)<=0x9e) ? 1 : 0); ++ c2 = *(sp+1); ++ if (c2 >= 0x9f) c2 -= 0x7e; /* 0x9F - 0xFC */ ++ else if (c2 >= 0x80) c2 -= 0x20; /* 0x80 - 0x9E */ ++ else c2 -= 0x1f; /* 0x40 - 0x7E */ ++ ++ *lp++ = c1 | 0x80; ++ *lp = c2 | 0x80; ++ sp += 2; ++/*fprintf(stderr, "(%x %x) ", c1 | 0x80, c2 | 0x80);*/ ++ cpos++; ++ } ++ ++ else if (*sp >= 0xa1 && *sp <= 0xdf) { /* JIS X 0201 kana */ ++#if defined(__osf__) && !defined(X_LOCALE) ++ *lp = '='; sp++; ++#else ++ *lp++ = 0x8e; /* ^N | 0x80 */ ++ *lp = *sp++; ++#endif ++ } ++ ++ else *lp = *sp++; ++ } ++#endif /* TV_L10N */ ++ ++#ifdef TV_L10N ++ else if (!tv->code && *sp > 127) { ++#else else if (*sp > 127) { ++#endif if (!extrach) extrach = 4; if (extrach == 4) *lp = '\\'; -@@ -926,7 +923,7 @@ + else if (extrach == 3) *lp = ((u_char)(*sp & 0700) >> 6) + '0'; +@@ -919,6 +1338,9 @@ + } + } + } ++#ifdef TV_L10N ++ *lp = '\0'; /* terminate linestr */ ++#endif + } + + else { /* below bottom of file. Just build a blank str */ +@@ -926,24 +1348,31 @@ } /* draw the line */ - XDrawImageString(theDisp, tv->textW, theGC, -+ XDrawImageString(theDisp, tv->textW, theGC, - 3, i*mfhigh + 3 + mfascent, linestr, lwide); +- 3, i*mfhigh + 3 + mfascent, linestr, lwide); ++#ifdef TV_L10N ++ if (xlocale) ++ XmbDrawImageString(theDisp, tv->textW, monofset, theGC, ++ 3, i*mfhigh + 1 + mfascent, linestr, strlen(linestr)); ++ else ++#endif ++ XDrawImageString(theDisp, tv->textW, theGC, ++ 3, i*mfhigh + 3 + mfascent, linestr, lwide); } /* for i ... */ ++#endif /* TV_MULTILINGUAL */ } /* if hexmode */ -@@ -936,7 +933,7 @@ + + + else { /* HEX MODE */ for (i=0; i<tv->chhigh; i++) { /* draw each line */ - lnum = i + tv->vscrl.val; +- lnum = i + tv->vscrl.val; ++ lnum = i + vpos; if (lnum < tv->hexlines) { - + char hexstr[80], tmpstr[16]; /* generate hex for this line */ -@@ -972,7 +969,7 @@ + sprintf(hexstr, "0x%08x: ", lnum * 0x10); + +- sp = (byte *) tv->text + lnum * 0x10; +- ep = (byte *) tv->text + tv->textlen; /* ptr to end of buffer */ ++ sp = (const byte *) tv->text + lnum * 0x10; ++ ep = (const byte *) tv->text + tv->textlen; /* ptr to end of buffer */ + + for (j=0; j<16; j++) { + if (sp+j < ep) sprintf(tmpstr,"%02x ", sp[j]); +@@ -960,7 +1389,11 @@ + + for (j=0; j<16; j++) { + if (sp+j < ep) { ++#ifdef TV_L10N ++ if (sp[j] >= 32 && (sp[j] <= 127 || tv->code)) *lp++ = sp[j]; ++#else + if (sp[j] >= 32 && sp[j] <= 127) *lp++ = sp[j]; ++#endif + else *lp++ = '.'; + } + else *lp++ = ' '; +@@ -972,7 +1405,7 @@ now build 'linestr', which is going to have hexstr shifted and/or padded with blanks (ie, the displayed portion or hexstr) */ @@ -26093,7 +38282,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c for (cpos=0, sp=(byte *) hexstr; cpos<hpos && *sp; cpos++, sp++); for (cpos=0, lp=(byte *)linestr; cpos<lwide; cpos++, lp++) { -@@ -985,16 +982,16 @@ +@@ -985,16 +1418,16 @@ } /* draw the line */ @@ -26113,7 +38302,31 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c R3D_IN, 2, hicol, locol, infobg); } -@@ -1033,7 +1030,7 @@ +@@ -1008,14 +1441,21 @@ + int i; + BUTT *bp; + +- for (i=0, bp=tv->but; i<TV_NBUTTS; i++, bp++) { ++ for (i=0, bp=tv->but; i<nbutts; i++, bp++) { + if (PTINRECT(x,y,bp->x,bp->y,bp->w,bp->h)) break; + } + +- if (i<TV_NBUTTS) { ++ if (i<nbutts) { + if (BTTrack(bp)) doCmd(tv, i); + return; + } ++ ++#ifdef TV_MULTILINGUAL ++ if (PTINRECT(x, y, tv->csbut.x, tv->csbut.y, tv->csbut.w, tv->csbut.h)) { ++ if (BTTrack(&tv->csbut)) ++ openCsWin(tv); ++ } ++#endif + } + + +@@ -1033,7 +1473,7 @@ stlen = XLookupString(kevt, buf, 128, &ks, (XComposeStatus *) NULL); shift = kevt->state & ShiftMask; ck = CursorKey(ks, shift, 1); @@ -26122,7 +38335,50 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c RemapKeyCheck(ks, buf, &stlen); -@@ -1060,8 +1057,6 @@ +@@ -1045,13 +1485,38 @@ + + /* keyboard equivalents */ + switch (buf[0]) { +- case '\001': doCmd(tv, TV_ASCII); break; /* ^A = Ascii */ +- case '\010': doCmd(tv, TV_HEX); break; /* ^H = Hex */ +- +- case '\033': doCmd(tv, TV_CLOSE); break; /* ESC = Close window */ ++ case '\001': case 'a': case 'A': ++ doCmd(tv, TV_ASCII); break; /* ^A = Ascii */ ++ case '\010': case 'h': case 'H': ++ doCmd(tv, TV_HEX); break; /* ^H = Hex */ ++ ++ case '\021': case 'q': case 'Q': ++ case '\003': case 'c': case 'C': ++ case '\033': ++ doCmd(tv, TV_CLOSE); break; /* ESC = Close window */ + + default: break; + } ++ ++#ifdef TV_L10N ++ if (xlocale) { ++ switch (buf[0]) { ++ case '\022': case 'r': case 'R': ++ doCmd(tv, TV_RESCAN); break; ++ case '\012': case 'j': case 'J': ++ doCmd(tv, TV_JIS); break; ++ case '\005': case 'e': case 'E': ++ case '\025': case 'u': case 'U': ++ doCmd(tv, TV_EUCJ); break; ++ case '\015': case 'm': case 'M': ++ case '\023': case 's': case 'S': ++ doCmd(tv, TV_MSCODE); break; ++ ++ default: break; ++ } ++ } ++#endif /* TV_L10N */ ++ + } + + +@@ -1060,8 +1525,6 @@ TVINFO *tv; int key; { @@ -26131,7 +38387,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c if (!tv->textlen) return; /* an arrow key (or something like that) was pressed in icon window. -@@ -1108,7 +1103,7 @@ +@@ -1108,13 +1571,26 @@ else { /* switch to ascii mode */ pos = oldvscrl * 16; for (i=0; i<tv->numlines-1; i++) { @@ -26140,20 +38396,74 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c tv->lines[i] - tv->text <= pos) break; } if (i<tv->numlines-1) SCSetVal(&tv->vscrl, i); -@@ -1127,9 +1122,9 @@ + } + ++#ifdef TV_L10N ++ /* redraw text */ ++ if (xlocale) { ++ XClearArea(theDisp, tv->textW, 0, 0, ++ (u_int) tv->twWide, (u_int) tv->twHigh, False); ++ ++ drawTextW(0, &tv->vscrl); ++ } ++#endif ++#ifdef TV_MULTILINGUAL ++ XClearArea(theDisp, tv->textW, 0, 0, ++ (u_int) tv->twWide, (u_int) tv->twHigh, False); + drawTextW(0, &tv->vscrl); ++#endif + } + + +@@ -1125,16 +1601,29 @@ + /* compute # of lines and linestarts array for given text */ + int i,j,wide,maxwide,space; - byte *sp; +- byte *sp; ++ const byte *sp; - if (!tv->text) { - tv->numlines = tv->hexlines = 0; - tv->lines = (char **) NULL; ++#ifdef TV_L10N ++ /* select code-set */ ++ if (xlocale) ++ tv->code = selectCodeset(tv); ++#endif /* TV_L10N */ ++ + if (!tv->text) { + tv->numlines = tv->hexlines = 0; -+ tv->lines = (char **) NULL; ++ tv->lines = (const char **) NULL; ++#ifdef TV_MULTILINGUAL ++ if (tv->cv_text != NULL) { ++ free(tv->cv_text); ++ tv->cv_text = NULL; ++ } ++ tv->txt = NULL; ++#endif return; } -@@ -1153,8 +1148,8 @@ + /* count the # of newline characters in text */ +- for (i=0, sp=(byte *) tv->text, tv->numlines=0; i<tv->textlen; i++, sp++) { ++ for (i=0, sp=(const byte *) tv->text, tv->numlines=0; i<tv->textlen; i++, sp++) { + if (*sp == '\n') tv->numlines++; + } + +@@ -1142,19 +1631,19 @@ + tv->numlines += 2; + + /* build lines array */ +- tv->lines = (char **) malloc(tv->numlines * sizeof(char *)); ++ tv->lines = (const char **) malloc(tv->numlines * sizeof(char *)); + if (!tv->lines) FatalError("out of memory in computeText()"); + + j = 0; + tv->lines[j++] = tv->text; +- for (i=0, sp=(byte *) tv->text; i<tv->textlen; i++, sp++) { ++ for (i=0, sp=(const byte *) tv->text; i<tv->textlen; i++, sp++) { + if (*sp == '\n') tv->lines[j++] = (char *) (sp + 1); + } tv->lines[tv->numlines - 1] = tv->text + tv->textlen + 1; @@ -26164,7 +38474,7 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c be printed by printing ((lines[n+1] - lines[n]) - 1) characters, starting with lines[n]. -@@ -1164,13 +1159,13 @@ +@@ -1164,30 +1653,142 @@ /* compute length of longest line, when shown in 'ascii' mode. Takes into account the fact that non-printing chars (<32 or >127) will be @@ -26176,14 +38486,795 @@ diff -ruN xv-3.10a/xvtext.c xv-3.10a-bugfixes/xvtext.c for (i=0; i<tv->numlines-1; i++) { /* compute displayed width of line #i */ - for (sp=(byte *) tv->lines[i], wide=0; sp<(byte *) tv->lines[i+1]-1; -+ for (sp=(byte *) tv->lines[i], wide=0; sp<(byte *) tv->lines[i+1]-1; ++ for (sp=(const byte *) tv->lines[i], wide=0; sp<(const byte *) tv->lines[i+1]-1; sp++) { if (*sp == '\011') { /* tab to next multiple of 8 */ space = ((wide+8) & (~7)) - wide; -diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c + wide += space; + } + else if (*sp < 32) wide += 2; ++#ifdef TV_L10N ++ else if (*sp > 127 && !tv->code) wide += 4; ++#else + else if (*sp > 127) wide += 4; ++#endif + else wide++; + } + if (wide > maxwide) maxwide = wide; + } + tv->maxwide = maxwide; + ++#ifdef TV_MULTILINGUAL ++ ml_set_charsets(tv->ctx, &tv->ccs.coding_system); ++ if (tv->cv_text != NULL) { ++ free(tv->cv_text); ++ tv->cv_text = NULL; ++ } ++ if (tv->ccs.converter == NULL) { ++ tv->txt = ml_draw_text(tv->ctx, tv->text, tv->textlen); ++ } else { ++ tv->cv_text = (*tv->ccs.converter)(tv->text, tv->textlen, &tv->cv_len); ++ tv->txt = ml_draw_text(tv->ctx, tv->cv_text, tv->cv_len); ++ } ++ tv->maxwide = tv->txt->width / mfwide; ++ tv->numlines = tv->txt->height / mfhigh + 1; ++#endif ++ + tv->hexlines = (tv->textlen + 15) / 16; + } + + ++/***************************************************/ ++#ifdef TV_L10N ++static int selectCodeset(tv) ++ TVINFO *tv; ++{ ++ const byte *sp; ++ int i, len; ++ int code = LOCALE_USASCII; /* == 0 */ ++ ++ ++ len = tv->textlen; ++ ++ /* select code-set */ ++ if (xlocale) { ++ sp = (const byte *) tv->text; i = 0; ++ while (i < len - 1) { ++ if (*sp == 0x1b && ++ (*(sp+1) == '$' || *(sp+1) == '(' || *(sp+1) == ')')) { ++ code = LOCALE_JIS; ++ break; ++ } ++ ++ else if (*sp >= 0xa1 && *sp <= 0xdf) { ++ if (*(sp+1) >= 0xf0 && *(sp+1) <= 0xfe) { ++ code = LOCALE_EUCJ; ++ break; ++ } ++# if (LOCALE_DEFAULT == LOCALE_EUCJ) ++ else { ++ sp++; i++; ++ } ++# endif ++ } ++ ++ else if ((*sp >= 0x81 && *sp <= 0x9f) || (*sp >= 0xe0 && *sp <= 0xef)) { ++ if ((*(sp+1) >= 0x40 && *(sp+1) <= 0x7e) || *(sp+1) == 0x80) { ++ code = LOCALE_MSCODE; ++ break; ++ } ++ else if (*(sp+1) == 0xfd || *(sp+1) == 0xfe) { ++ code = LOCALE_EUCJ; ++ break; ++ } ++ else { ++ sp++; i++; ++ } ++ } ++ ++ else if (*sp >= 0xf0 && *sp <= 0xfe) { ++ code = LOCALE_EUCJ; ++ break; ++ } ++ ++ sp++; i++; ++ } ++ if (!code) code = LOCALE_DEFAULT; ++ } ++ ++ return code; ++} ++#endif /* TV_L10N */ ++ ++#ifdef TV_MULTILINGUAL ++static void setCodingSpec(tv, cs) ++ TVINFO *tv; ++ struct coding_spec *cs; ++{ ++ if (xvbcmp((char *) &tv->ccs, (char *) cs, sizeof *cs) == 0) ++ return; ++ ++ tv->ccs = *cs; ++#if 0 ++ ml_set_charsets(tv->ctx, &tv->ccs.coding_system); ++ if (tv->cv_text != NULL) { ++ free(tv->cv_text); ++ tv->cv_text = NULL; ++ } ++ if (tv->ccs.converter == NULL) { ++ tv->txt = ml_draw_text(tv->ctx, tv->text, tv->textlen); ++ } else { ++ tv->cv_text = (*tv->ccs.converter)(tv->text, tv->textlen, &tv->cv_len); ++ tv->txt = ml_draw_text(tv->ctx, tv->cv_text, tv->cv_len); ++ } ++#else ++ computeText(tv); ++ computeScrlVals(tv); ++#endif ++ /* drawTextW(0, &tv->vscrl); */ ++} ++#endif ++ ++ + /**********************************************************************/ + /* BUILT-IN TEXT FILES ************************************************/ + /**********************************************************************/ +@@ -1203,9 +1804,13 @@ + + /* build the license text */ + #ifdef LC +-#undef LC ++# undef LC ++#endif ++#ifdef __STDC__ /* since "x" is always a static string, this works: */ ++# define LC(x) (strcat(license, x "\n")) ++#else ++# define LC(x) (strcat(license, x), strcat(license, "\n")) + #endif +-#define LC(x) (strcat(license, x), strcat(license, "\n")) + + LC("(Note: This has been changed, and hopefully clarified, from the 3.00"); + LC("version of this info. Please read it.)"); +@@ -1220,7 +1825,12 @@ + LC("the xv distribution. Do *not* send mail unless absolutely necessary"); + LC("(ie, you don't have ftp capability)."); + LC(""); +- LC("Note: The docs (xvdocs.ps) may be installed in '/usr/local/lib'."); ++ LC("Note: The documentation (README.jumbo, xvdocs.ps, and/or xvdocs.pdf)"); ++#ifdef __STDC__ ++ LC("may be installed in '" DOCDIR "'."); ++#else ++ LC("may be installed in '/usr/local/share/doc/xv'."); ++#endif + LC(""); + LC("If you're viewing this information via the 'About XV' command, and"); + LC("you'd like to print it out, a copy of this info can be found in the "); +@@ -1230,7 +1840,7 @@ + LC(""); + LC("XV Licensing Information"); + LC("------------------------"); +- LC("XV IS SHAREWARE FOR PERSONAL USE ONLY. "); ++ LC("XV IS SHAREWARE FOR PERSONAL USE ONLY."); + LC(""); + LC("You may use XV for your own amusement, and if you find it nifty,"); + LC("useful, generally cool, or of some value to you, your registration fee"); +@@ -1279,7 +1889,7 @@ + LC("are not. All forms of payment must be payable in US Funds. Checks"); + LC("must be payable through a US bank (or a US branch of a non-US bank)."); + LC("Purchase orders for less than $50, while still accepted, are not"); +- LC("encouraged. "); ++ LC("encouraged."); + LC(""); + LC("All payments should be payable to 'John Bradley', and mailed to:"); + LC(" John Bradley"); +@@ -1382,7 +1992,11 @@ + keyhelp[0] = '\0'; + + #undef LC +-#define LC(x) (strcat(keyhelp, x), strcat(keyhelp, "\n")) ++#ifdef __STDC__ /* since "x" is always a static string, this works: */ ++# define LC(x) (strcat(keyhelp, x "\n")) ++#else ++# define LC(x) (strcat(keyhelp, x), strcat(keyhelp, "\n")) ++#endif + + LC("XV Mouse and Keyboard Usage"); + LC("==========================="); +@@ -1415,16 +2029,16 @@ + LC(""); + LC("Part 2: Normal Keyboard Equivalents"); + LC("------------------------------------"); +- LC("The following keys can be used in most xv windows, including the "); +- LC("image, controls, and color editor windows, but *not* in the visual"); +- LC("schnauzer windows."); ++ LC("The following keys can be used in most xv windows, including the"); ++ LC("image, controls, and color editor windows, but *not* in the Visual"); ++ LC("Schnauzer windows."); + LC(""); +- LC(" Tab or "); ++ LC(" Tab or"); + LC(" Space - 'Next' command"); + LC(""); + LC(" Return - reload currently displayed image file"); + LC(""); +- LC(" Del or "); ++ LC(" Del or"); + LC(" Backspace - 'Prev' command"); + LC(""); + LC(" ctrl+'l' - 'Load' command"); +@@ -1432,7 +2046,7 @@ + LC(" ctrl+'p' - 'Print' command"); + LC(" ctrl+'d' - 'Delete' command"); + LC(""); +- LC(" 'q' or "); ++ LC(" 'q' or"); + LC(" ctrl+'q' - 'Quit' command"); + LC(""); + LC(" meta+'x' - 'cut' command"); +@@ -1468,7 +2082,7 @@ + LC(" 's' - smooth mode"); + LC(" meta+'8' - toggle 8/24 bit mode"); + LC(""); +- LC(" 'V' or "); ++ LC(" 'V' or"); + LC(" ctrl+'v' - Visual Schnauzer"); + LC(" 'e' - Color Editor"); + LC(" 'i' - Image Info"); +@@ -1490,7 +2104,7 @@ + LC(" meta+'S' - Spread algorithm"); + LC(""); + LC(" 'R' or"); +- LC(" meta+'r' or "); ++ LC(" meta+'r' or"); + LC(" meta+'0' - 'Reset' command in color editor"); + LC(""); + LC(" meta+'1' - select preset 1 in color editor"); +@@ -1503,7 +2117,7 @@ + LC(""); + LC("Part 2a: Image Window Keys"); + LC("---------------------------"); +- LC("The following keys can *only* be used inside the image window."); ++ LC("The following keys can be used *only* inside the image window."); + LC(""); + LC(" ctrl + Up - crops 1 pixel off the bottom of the image"); + LC(" ctrl + Down - crops 1 pixel off the top of the image"); +@@ -1514,11 +2128,11 @@ + LC(" 'p' - opens a 'go to page #' dialog box"); + LC(""); + LC(" PageUp, or"); +- LC(" Prev, or "); ++ LC(" Prev, or"); + LC(" shift+Up - previous page"); + LC(""); + LC(" PageDown, or"); +- LC(" Next, or "); ++ LC(" Next, or"); + LC(" shift+Down - next page"); + LC(""); + LC(""); +@@ -1535,7 +2149,7 @@ + LC(""); + LC("Part 2b: Visual Schnauzer Keys"); + LC("-------------------------------"); +- LC("The following keys can only be used in the visual schnauzer windows."); ++ LC("The following keys can be used only in the Visual Schnauzer windows."); + LC(""); + LC(" ctrl+'d' - delete file(s)"); + LC(" ctrl+'n' - create new directory"); +@@ -1560,8 +2174,509 @@ + OpenTextView(keyhelp, (int) strlen(keyhelp), "XV Help", 0); + } + ++#ifdef TV_MULTILINGUAL + ++#define TV_ML_ACCEPT TV_NCSS ++#define TV_ML_CLOSE (TV_ML_ACCEPT + 1) ++#define TV_ML_NBUTTS (TV_ML_CLOSE + 1) ++ ++#define TV_ML_RETCODE 0 ++# define TV_ML_RET_LF 0 ++# define TV_ML_RET_CRLF 1 ++# define TV_ML_RET_CR 2 ++# define TV_ML_RET_ANY 3 ++#define TV_ML_GL 1 ++#define TV_ML_GR 2 ++#define TV_ML_CVTR 3 ++#define TV_ML_NRBUTTS 4 ++ ++#define TV_ML_SHORT 0 ++#define TV_ML_LOCK 1 ++#define TV_ML_NCBUTTS 2 ++ ++#define TV_ML_NLISTS 4 ++ ++#define CSWIDE (BUTTW3 * 5 + 5 * 6) ++#define CSHIGH 450 ++ ++typedef struct csinfo_t { ++ TVINFO *tv; ++ RBUTT *rbt[TV_ML_NRBUTTS]; ++ CBUTT cbt[TV_ML_NCBUTTS]; ++ LIST ls[TV_ML_NLISTS]; ++ BUTT bt[TV_ML_NBUTTS]; ++ int up; ++ Window win; ++ struct coding_spec tcs; /* temporary coding_spec */ ++} CSINFO; ++CSINFO csinfo[MAXTVWIN]; ++static char **regs; ++static int nregs; ++ ++static int csCheckEvent PARM((CSINFO *, XEvent *)); ++static void csReflect PARM((CSINFO *)); ++static void csRedraw PARM((CSINFO *)); ++static void csListRedraw PARM((LIST *)); ++static void csLsRedraw PARM((int, SCRL *)); ++static void create_registry_list PARM((void)); ++ ++static char *(*cvtrtab[])PARM((char *, int, int *)) = { ++ NULL, ++ sjis_to_jis, ++}; + ++static void createCsWins(geom) ++ const char *geom; ++{ ++ XSetWindowAttributes xswa; ++ int i, j; ++ ++ create_registry_list(); ++ ++ xswa.backing_store = WhenMapped; ++ for (i = 0; i < MAXTVWIN; i++) { ++ char nam[8]; ++ TVINFO *tv = &tinfo[i]; ++ CSINFO *cs = &csinfo[i]; ++ tv->cs = cs; ++ cs->tv = tv; ++ sprintf(nam, "XVcs%d", i); ++ cs->win = CreateWindow("xv codeset", nam, geom, ++ CSWIDE, CSHIGH, infofg, infobg, 0); ++ if (!cs->win) FatalError("couldn't create 'charset' window!"); ++#ifdef BACKING_STORE ++ XChangeWindowAttributes(theDisp, cs->win, CWBackingStore, &xswa); ++#endif ++ XSelectInput(theDisp, cs->win, ExposureMask | ButtonPressMask); ++ ++ DrawString(cs->win, 5, 5 + ASCENT, "Initial States"); ++ for (i = 0; i < TV_ML_NLISTS; i++) { ++ int x, y; ++ char buf[80]; ++ ++ if (i / 2 == 0) ++ x = 15; ++ else ++ x = 280; ++ if (i % 2 == 0) ++ y = 5 + LINEHIGH * 1; ++ else ++ y = 5 + LINEHIGH * 7 + SPACING * 3; ++ ++ sprintf(buf, "Designation for G%d:", i + 1); ++ DrawString(cs->win, x, y + ASCENT, buf); ++ ++ LSCreate(&cs->ls[i], cs->win, x + 15, y + LINEHIGH, ++ 200, LINEHIGH * 5, 5, ++ regs, nregs + 2, ++ infofg, infobg, hicol, locol, csLsRedraw, 0, 0); ++ cs->ls[i].selected = 0; ++ } + ++ for (i = 0; i < 2; i++) { ++ char *p; ++ int n; ++ int x, y; ++ ++ if ((p = (char *) malloc(3 * 4)) == NULL) ++ FatalError("out of memory in createCsWins()."); ++ strcpy(p, "G1 G2 G3 G4"); ++ p[2] = p[5] = p[8] = '\0'; ++ n = (i == 0 ? TV_ML_GL : TV_ML_GR); ++ x = (i == 0 ? 15 : 280); ++ y = 235; ++ DrawString(cs->win, x, y + ASCENT, "Assignment for GL:"); ++ x += 15; ++ y += LINEHIGH; ++ cs->rbt[n] = RBCreate(NULL, cs->win, ++ x, y, p, infofg, infobg, hicol, locol); ++ for (j = 1; j < 4; j++) { ++ p += 3; ++ x += 50; ++ RBCreate(cs->rbt[n], cs->win, ++ x, y, p, infofg, infobg, hicol, locol); ++ } ++ } ++ ++ DrawString(cs->win, 5, 280 + ASCENT, "Ret Code:"); ++ cs->rbt[TV_ML_RETCODE] = ++ RBCreate(NULL, cs->win, 20, 300, "LF", infofg,infobg, hicol,locol); ++ RBCreate(cs->rbt[TV_ML_RETCODE], cs->win, 20, 300 + 20, "CR+LF", ++ infofg, infobg, hicol, locol); ++ RBCreate(cs->rbt[TV_ML_RETCODE], cs->win, 90, 300, "CR", ++ infofg, infobg, hicol, locol); ++ RBCreate(cs->rbt[TV_ML_RETCODE], cs->win, 90, 300 + 20, "Any", ++ infofg, infobg, hicol, locol); ++ ++ DrawString(cs->win, 350, 280 + ASCENT, "Converter:"); ++ cs->rbt[TV_ML_CVTR] = ++ RBCreate(NULL, cs->win, 365, 300, "Nothing", ++ infofg, infobg, hicol, locol); ++ RBCreate(cs->rbt[TV_ML_CVTR], cs->win, 365, 300 + 20, "Shift JIS", ++ infofg, infobg, hicol, locol); ++ ++ CBCreate(&cs->cbt[TV_ML_SHORT], cs->win, 200, 300, "Short Form", ++ infofg, infobg, hicol, locol); ++ CBCreate(&cs->cbt[TV_ML_LOCK], cs->win, 200, 320, "Locking Shift", ++ infofg, infobg, hicol, locol); ++ ++ for (j = 0; j < TV_NCSS; j++) { ++ BTCreate(&cs->bt[j], cs->win, ++ 5 + (BUTTW3 + 5) * (j % 5), ++ 350 + 5 + (BUTTH + 5) * (j / 5), ++ BUTTW3, BUTTH, codeSetNames[j], ++ infofg, infobg, hicol, locol); ++ } ++ BTCreate(&cs->bt[TV_ML_ACCEPT], cs->win, ++ CSWIDE - 10 - BUTTW3 * 2, CSHIGH - 5 - BUTTH, BUTTW3, BUTTH, ++ "Accept", infofg, infobg, hicol, locol); ++ BTCreate(&cs->bt[TV_ML_CLOSE], cs->win, ++ CSWIDE - 5 - BUTTW3, CSHIGH - 5 - BUTTH, BUTTW3, BUTTH, ++ "Close", infofg, infobg, hicol, locol); ++ ++ XMapSubwindows(theDisp, cs->win); ++ cs->up = 0; ++ } ++} + ++static void openCsWin(tv) ++ TVINFO *tv; ++{ ++ CSINFO *cs = tv->cs; ++ if (cs->up) ++ return; ++ ++ XMapRaised(theDisp, cs->win); ++ cs->up = 1; ++ cs->tcs = cs->tv->ccs; ++ csReflect(cs); ++} ++ ++static void closeCsWin(tv) ++ TVINFO *tv; ++{ ++ CSINFO *cs = tv->cs; ++ if (!cs->up) ++ return; ++ cs->up = 0; ++ XUnmapWindow(theDisp, cs->win); ++} ++ ++int CharsetCheckEvent(xev) ++ XEvent *xev; ++{ ++ int i; ++ CSINFO *cs; ++ ++ for (cs = csinfo, i = 0; i < MAXTVWIN; cs++, i++) { ++ if (!cs->up) ++ continue; ++ if (csCheckEvent(cs, xev)) ++ break; ++ } ++ if (i < MAXTVWIN) ++ return 1; ++ return 0; ++} ++ ++static int csCheckEvent(cs, xev) ++ CSINFO *cs; ++ XEvent *xev; ++{ ++ RBUTT **rbp; ++ CBUTT *cbp; ++ LIST *ls; ++ BUTT *bp; ++ int i, n; ++ ++ if (xev->type == Expose) { ++ int x, y, w, h; ++ XExposeEvent *e = (XExposeEvent *) xev; ++ x = e->x; y = e->y; w = e->width; h = e->height; ++ ++ if (cs->win == e->window){ ++ csRedraw(cs); ++ return 1; ++ } else { ++ for (i = 0; i < TV_ML_NLISTS; i++) { ++ if (cs->ls[i].win == e->window) { ++ LSRedraw(&cs->ls[i], 0); ++ return 1; ++ } ++ } ++ for (i = 0; i < TV_ML_NLISTS; i++) { ++ if (cs->ls[i].scrl.win == e->window) { ++ SCRedraw(&cs->ls[i].scrl); ++ return 1; ++ } ++ } ++ } ++ } else if (xev->type == ButtonPress) { ++ int x, y; ++ XButtonEvent *e = (XButtonEvent *) xev; ++ x = e->x; y = e->y; ++ if (cs->win == e->window) { ++ for (bp = cs->bt, i = 0; i < TV_ML_NBUTTS; bp++, i++) { ++ if (PTINRECT(x, y, bp->x, bp->y, bp->w, bp->h)) ++ break; ++ } ++ if (i < TV_ML_NBUTTS) { ++ if (BTTrack(bp)) { ++ if (i < TV_NCSS) { ++ cs->tcs = coding_spec[i]; ++ csReflect(cs); ++ } else { ++ switch (i) { ++ case TV_ML_ACCEPT: ++ setCodingSpec(cs->tv, &cs->tcs); ++ break; ++ case TV_ML_CLOSE: ++ closeCsWin(cs->tv); ++ break; ++ } ++ } ++ } ++ return 1; ++ } ++ for (cbp = cs->cbt, i = 0; i < TV_ML_NCBUTTS; cbp++, i++) { ++ if (CBClick(cbp, x, y) && CBTrack(cbp)) ++ break; ++ } ++ if (i < TV_ML_NCBUTTS) { ++ switch (i) { ++ case TV_ML_SHORT: ++ cs->tcs.coding_system.short_form = cbp->val; ++ break; ++ case TV_ML_LOCK: ++ cs->tcs.coding_system.lock_shift = cbp->val; ++ break; ++ } ++ return 1; ++ } ++ for (rbp = cs->rbt, i = 0; i < TV_ML_NRBUTTS; rbp++, i++) { ++ if ((n = RBClick(*rbp, x, y)) >= 0 && RBTrack(*rbp, n)) { ++ break; ++ } ++ } ++ if (i < TV_ML_NRBUTTS) { ++ switch (i) { ++ case TV_ML_RETCODE: ++ cs->tcs.coding_system.eol = n; ++ break; ++ case TV_ML_GL: ++ cs->tcs.coding_system.gl = n; ++ break; ++ case TV_ML_GR: ++ cs->tcs.coding_system.gr = n; ++ break; ++ case TV_ML_CVTR: ++ cs->tcs.converter = cvtrtab[n]; ++ break; ++ } ++ return 1; ++ } ++ } else { ++ for (ls = cs->ls, i = 0; i < TV_ML_NLISTS; ls++, i++) { ++ if (ls->win == e->window) { ++ LSClick(ls, e); ++ n = ls->selected; ++ if (n < nregs) { ++ char r[32], *p = r; ++ int b7; ++ strcpy(r, regs[n]); ++ if ((p = strrchr(r, '/')) != NULL) { ++ *p = '\0'; ++ b7 = (*(p + 1) == 'R' ? 1 : 0); ++ } else ++ b7 = 0; /* shouldn't occur */ ++ cs->tcs.coding_system.design[i] = lookup_design(r, b7); ++ } else if (n == nregs) /* initially none is designed. */ ++ cs->tcs.coding_system.design[i].bpc = 0; ++ else ++ cs->tcs.coding_system.design[i].bpc = -1; ++ return 1; ++ } ++ } ++ for (ls = cs->ls, i = 0; i < TV_ML_NLISTS; ls++, i++) { ++ if (ls->scrl.win == e->window) { ++ SCTrack(&ls->scrl, x, y); ++ return 1; ++ } ++ } ++ } ++ } ++ return 0; ++} ++ ++static void csReflect(cs) ++ CSINFO *cs; ++{ ++ int i; ++ ++ RBSelect(cs->rbt[TV_ML_RETCODE], cs->tcs.coding_system.eol); ++ RBSelect(cs->rbt[TV_ML_GL], cs->tcs.coding_system.gl); ++ RBSelect(cs->rbt[TV_ML_GR], cs->tcs.coding_system.gr); ++ for (i = 0; i < sizeof cvtrtab / sizeof cvtrtab[0]; i++) { ++ if (cs->tcs.converter == cvtrtab[i]) ++ break; ++ } ++ if (i >= sizeof cvtrtab / sizeof cvtrtab[0]) ++ FatalError("program error in csReflect()."); ++ RBSelect(cs->rbt[TV_ML_CVTR], i); ++ ++ cs->cbt[TV_ML_SHORT].val = cs->tcs.coding_system.short_form; ++ cs->cbt[TV_ML_LOCK].val = cs->tcs.coding_system.lock_shift; ++ for (i = 0; i < TV_ML_NLISTS; i++) { ++ struct design design = cs->tcs.coding_system.design[i]; ++ char *reg, r[32]; ++ int b7; ++ int n = 0; ++ switch (design.bpc) { ++ case -1: ++ n = nregs + 1; ++ break; ++ case 0: ++ n = nregs; ++ break; ++ case 1: ++ case 2: ++ if ((reg = lookup_registry(design, &b7)) == NULL) ++ FatalError("internal error in csReflect."); ++ sprintf(r, "%s/%s", reg, b7 ? "Right" : "Left"); ++ for (n = 0; n < nregs; n++) { ++ if (strcmp(regs[n], r) == 0) ++ break; ++ } ++ } ++ cs->ls[i].selected = n; ++ ScrollToCurrent(&cs->ls[i]); ++ } ++ csRedraw(cs); ++ for (i = 0; i < TV_ML_NLISTS; i++) ++ csListRedraw(&cs->ls[i]); ++} ++ ++static void csRedraw(cs) ++ CSINFO *cs; ++{ ++ int i; ++ ++ XSetForeground(theDisp, theGC, infofg); ++ DrawString(cs->win, 5,5 + ASCENT, "Initial States"); ++ for (i = 0; i < TV_ML_NLISTS; i++) { ++ int x, y; ++ char buf[80]; ++ ++ if (i / 2 == 0) ++ x = 15; ++ else ++ x = 280; ++ if (i % 2 == 0) ++ y = 5 + LINEHIGH * 1; ++ else ++ y = 5 + LINEHIGH * 7 + SPACING * 3; ++ ++ sprintf(buf, "Designation for G%d:", i); ++ DrawString(cs->win, x, y + ASCENT, buf); ++ } ++ ++ DrawString(cs->win, 15, 235 + ASCENT, "Invocation for GL:"); ++ DrawString(cs->win, 280, 235 + ASCENT, "Invocation for GR:"); ++ DrawString(cs->win, 5, 280 + ASCENT, "Ret Code:"); ++ DrawString(cs->win, 350, 280 + ASCENT, "Converter:"); ++ ++ for (i = 0; i < TV_ML_NBUTTS; i++) ++ BTRedraw(&cs->bt[i]); ++ for (i = 0; i < TV_ML_NCBUTTS; i++) ++ CBRedraw(&cs->cbt[i]); ++ for (i = 0; i < TV_ML_NRBUTTS; i++) ++ RBRedraw(cs->rbt[i], -1); ++} ++ ++static void csListRedraw(ls) ++ LIST *ls; ++{ ++ int i; ++ for (i = 0; i < TV_ML_NLISTS; i++) { ++ LSRedraw(ls, 0); ++ SCRedraw(&ls->scrl); ++ } ++} ++ ++static void csLsRedraw(delta, sptr) ++ int delta; ++ SCRL *sptr; ++{ ++ int i, j; ++ for (i = 0; i < MAXTVWIN; i++) { ++ for (j = 0; j < TV_ML_NLISTS; j++) { ++ if (sptr == &csinfo[i].ls[j].scrl) { ++ LSRedraw(&csinfo[i].ls[j], delta); ++ return; ++ } ++ } ++ } ++} ++ ++int CharsetDelWin(win) ++ Window win; ++{ ++ CSINFO *cs; ++ int i; ++ ++ for (cs = csinfo, i = 0; i < TV_NCSS; cs++, i++) { ++ if (cs->win == win) { ++ if (cs->up) { ++ XUnmapWindow(theDisp, cs->win); ++ cs->up = 0; ++ } ++ return 1; ++ } ++ } ++ return 0; ++} ++ ++static int reg_comp PARM((const void *, const void *)); ++static void create_registry_list() ++{ ++ struct design d; ++ char *names, *p; ++ int i; ++ ++ if ((p = names = (char *) malloc(32 * 0x80 * 2 * 2)) == NULL) ++ FatalError("out of memory in create_name_list#1."); ++ nregs = 0; ++ for (d.bpc = 1; d.bpc <=2; d.bpc++) { ++ for (d.noc = 94; d.noc <= 96; d.noc += 2) { ++ for (d.des = ' '; (unsigned char) d.des < 0x80; d.des++) { ++ int b7; ++ char *r; ++ if ((r = lookup_registry(d, &b7)) != NULL) { ++ sprintf(p, "%s/%s", r, b7 ? "Right" : "Left"); ++ p += strlen(p) + 1; ++ nregs++; ++ } ++ } ++ } ++ } ++ if ((names = (char *) realloc(names, (size_t) (p - names))) == NULL) ++ FatalError("out of memory in create_name_list#2."); ++ if ((regs = (char **) malloc(sizeof(char *) * (nregs + 3))) == NULL) ++ FatalError("out of memory in create_name_list#3."); ++ p = names; ++ for (i = 0; i < nregs; i++) { ++ regs[i] = p; ++ p += strlen(p) + 1; ++ } ++ qsort(regs, (size_t) nregs, sizeof(char *), reg_comp); ++ regs[i++] = "nothing"; ++ regs[i++] = "unused"; ++ regs[i++] = NULL; ++} ++static int reg_comp(dst, src) ++ const void *dst, *src; ++{ ++ return strcmp(*(char **) dst, *(char **) src); ++} + ++#endif /* TV_MULTILINGUAL */ +diff -ru xv-3.10a/xvtiff.c xv-3.10a-enhancements/xvtiff.c --- xv-3.10a/xvtiff.c 1995-01-13 11:53:34.000000000 -0800 -+++ xv-3.10a-bugfixes/xvtiff.c 2005-03-27 17:25:31.000000000 -0800 -@@ -1,7 +1,7 @@ ++++ xv-3.10a-enhancements/xvtiff.c 2007-05-20 10:32:31.000000000 -0700 +@@ -1,11 +1,11 @@ /* * xvtiff.c - load routine for 'TIFF' format pictures * @@ -26192,6 +39283,11 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c */ #ifndef va_start +-# define NEEDSARGS ++# define NEEDSARGS + #endif + + #include "xv.h" @@ -15,6 +15,35 @@ #include "tiffio.h" /* has to be after xv.h, as it needs varargs/stdarg */ @@ -26228,9 +39324,16 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c static byte *loadPalette PARM((TIFF *, uint32, uint32, int, int, PICINFO *)); static byte *loadColor PARM((TIFF *, uint32, uint32, int, int, PICINFO *)); static int loadImage PARM((TIFF *, uint32, uint32, byte *, int)); -@@ -28,19 +57,23 @@ +@@ -23,24 +52,29 @@ + + static long filesize; + static byte *rmap, *gmap, *bmap; +-static char *filename; ++static const char *filename; + static int error_occurred; ++ /*******************************************/ -int LoadTIFF(fname, pinfo) - char *fname; @@ -26254,7 +39357,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c error_occurred = 0; -@@ -60,6 +93,8 @@ +@@ -60,6 +94,8 @@ filesize = ftell(fp); fclose(fp); @@ -26263,7 +39366,16 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c rmap = pinfo->r; gmap = pinfo->g; bmap = pinfo->b; /* a kludge: temporarily cd to the directory that the file is in (if -@@ -80,10 +115,61 @@ +@@ -71,7 +107,7 @@ + if (fname[0] == '/') { + xv_getwd(oldpath, sizeof(oldpath)); + strcpy(tmppath, fname); +- sp = BaseName(tmppath); ++ sp = (char *) BaseName(tmppath); /* intentionally losing constness */ + if (sp != tmppath) { + sp[-1] = '\0'; /* truncate before last '/' char */ + if (chdir(tmppath)) { +@@ -80,10 +116,65 @@ else filename = BaseName(fname); } } @@ -26278,9 +39390,9 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c + /* see if there's more than 1 image in tiff file, to determine if we + should do multi-page thing... */ + -+ tif = TIFFOpen(filename,"r"); ++ tif = TIFFOpen(filename, "r"); + if (!tif) return 0; -+ while (TIFFReadDirectory(tif)) nump++; ++ while (TIFFReadDirectory(tif)) ++nump; + TIFFClose(tif); + if (DEBUG) + fprintf(stderr,"LoadTIFF: %d page%s found\n", nump, nump==1 ? "" : "s"); @@ -26289,20 +39401,23 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c + /* if there are multiple images, copy them out to multiple tmp files, + and load the first one... */ + -+ /* GRR 20050320: converted this fake mktemp() to use mktemp()/mkstemp() -+ internally (formerly it simply prepended tmpdir to the string and -+ returned immediately) */ -+ xv_mktemp(tmpname, "xvpgXXXXXX"); -+ -+ if (tmpname[0] == '\0') { /* mktemp() or mkstemp() blew up */ -+ sprintf(str,"LoadTIFF: Unable to create temporary filename???"); -+ ErrPopUp(str, "\nHow unlikely!"); -+ return 0; -+ } -+ + if (nump>1) { + TIFF *in; + ++ /* GRR 20050320: converted this fake mktemp() to use mktemp()/mkstemp() ++ internally (formerly it simply prepended tmpdir to the string and ++ returned immediately) */ ++ xv_mktemp(tmpname, "xvpgXXXXXX"); ++ ++ if (tmpname[0] == '\0') { /* mktemp() or mkstemp() blew up */ ++ sprintf(dummystr,"LoadTIFF: Unable to create temporary filename???"); ++ ErrPopUp(dummystr, "\nHow unlikely!"); ++ return 0; ++ } ++ ++ /* GRR 20070506: could clean up unappended tmpname-file here (Linux ++ bug?), but "cleaner" (more general) to do so in KillPageFiles() */ ++ + in = TIFFOpen(filename, "r"); + if (!in) return 0; + for (i=1; i<=nump; i++) { @@ -26314,21 +39429,22 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c + + if (!TIFFReadDirectory(in)) break; + } ++ TIFFClose(in); + if (DEBUG) + fprintf(stderr,"LoadTIFF: %d page%s written\n", + i-1, (i-1)==1 ? "" : "s"); + -+ sprintf(tmp, "%s%d", tmpname, 1); /* open page #1 */ ++ sprintf(tmp, "%s%d", tmpname, 1); /* start with page #1 */ + filename = tmp; + } + } /* if (!quick) ... */ + + -+ tif = TIFFOpen(filename,"r"); ++ tif = TIFFOpen(filename, "r"); if (!tif) return 0; /* flip orientation so that image comes in X order */ -@@ -107,6 +193,11 @@ +@@ -107,6 +198,11 @@ TIFFGetFieldDefaulted(tif, TIFFTAG_BITSPERSAMPLE, &bps); TIFFGetField(tif, TIFFTAG_PHOTOMETRIC, &photo); TIFFGetFieldDefaulted(tif, TIFFTAG_SAMPLESPERPIXEL, &spp); @@ -26340,7 +39456,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c if (spp == 1) { pic8 = loadPalette(tif, w, h, photo, bps, pinfo); -@@ -116,19 +207,19 @@ +@@ -116,19 +212,19 @@ /* try to get comments, if any */ pinfo->comment = (char *) NULL; @@ -26363,7 +39479,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c TIFFClose(tif); /* un-kludge */ -@@ -139,6 +230,8 @@ +@@ -139,6 +235,8 @@ if (pic8) free(pic8); if (pinfo->comment) free(pinfo->comment); pinfo->comment = (char *) NULL; @@ -26372,7 +39488,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c return 0; } -@@ -148,15 +241,168 @@ +@@ -148,15 +246,178 @@ pinfo->normw = pinfo->w; pinfo->normh = pinfo->h; pinfo->frmType = F_TIFF; @@ -26417,7 +39533,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c + TIFF *out; + short bitspersample, samplesperpixel, shortv, *shortav; + uint32 w, l; -+ float floatv; ++ float floatv, *floatav; + char *stringv; + uint32 longv; + uint16 *red, *green, *blue, shortv2; @@ -26426,44 +39542,54 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c + out = TIFFOpen(fname, "w"); + if (!out) return 0; + -+ CopyField (TIFFTAG_SUBFILETYPE, longv); -+ CopyField (TIFFTAG_TILEWIDTH, w); -+ CopyField (TIFFTAG_TILELENGTH, l); -+ CopyField (TIFFTAG_IMAGEWIDTH, w); -+ CopyField (TIFFTAG_IMAGELENGTH, l); -+ CopyField (TIFFTAG_BITSPERSAMPLE, bitspersample); -+ CopyField (TIFFTAG_COMPRESSION, shortv); -+ CopyField (TIFFTAG_PREDICTOR, shortv); -+ CopyField (TIFFTAG_PHOTOMETRIC, shortv); -+ CopyField (TIFFTAG_THRESHHOLDING, shortv); -+ CopyField (TIFFTAG_FILLORDER, shortv); -+ CopyField (TIFFTAG_ORIENTATION, shortv); -+ CopyField (TIFFTAG_SAMPLESPERPIXEL, samplesperpixel); -+ CopyField (TIFFTAG_MINSAMPLEVALUE, shortv); -+ CopyField (TIFFTAG_MAXSAMPLEVALUE, shortv); -+ CopyField (TIFFTAG_XRESOLUTION, floatv); -+ CopyField (TIFFTAG_YRESOLUTION, floatv); -+ CopyField (TIFFTAG_GROUP3OPTIONS, longv); -+ CopyField (TIFFTAG_GROUP4OPTIONS, longv); -+ CopyField (TIFFTAG_RESOLUTIONUNIT, shortv); -+ CopyField (TIFFTAG_PLANARCONFIG, shortv); -+ CopyField (TIFFTAG_ROWSPERSTRIP, longv); -+ CopyField (TIFFTAG_XPOSITION, floatv); -+ CopyField (TIFFTAG_YPOSITION, floatv); -+ CopyField (TIFFTAG_IMAGEDEPTH, longv); -+ CopyField (TIFFTAG_TILEDEPTH, longv); -+ CopyField2(TIFFTAG_EXTRASAMPLES, shortv, shortav); -+ CopyField3(TIFFTAG_COLORMAP, red, green, blue); -+ CopyField2(TIFFTAG_PAGENUMBER, shortv, shortv2); -+ CopyField (TIFFTAG_ARTIST, stringv); -+ CopyField (TIFFTAG_IMAGEDESCRIPTION,stringv); -+ CopyField (TIFFTAG_MAKE, stringv); -+ CopyField (TIFFTAG_MODEL, stringv); -+ CopyField (TIFFTAG_SOFTWARE, stringv); -+ CopyField (TIFFTAG_DATETIME, stringv); -+ CopyField (TIFFTAG_HOSTCOMPUTER, stringv); -+ CopyField (TIFFTAG_PAGENAME, stringv); -+ CopyField (TIFFTAG_DOCUMENTNAME, stringv); ++ if (TIFFGetField(in, TIFFTAG_COMPRESSION, &shortv)){ ++ /* Currently, the TIFF Library cannot correctly copy TIFF version 6.0 (or ++ * earlier) files that use "old" JPEG compression, so don't even try. */ ++ if (shortv == COMPRESSION_OJPEG) return 0; ++ TIFFSetField(out, TIFFTAG_COMPRESSION, shortv); ++ } ++ CopyField (TIFFTAG_SUBFILETYPE, longv); ++ CopyField (TIFFTAG_TILEWIDTH, w); ++ CopyField (TIFFTAG_TILELENGTH, l); ++ CopyField (TIFFTAG_IMAGEWIDTH, w); ++ CopyField (TIFFTAG_IMAGELENGTH, l); ++ CopyField (TIFFTAG_BITSPERSAMPLE, bitspersample); ++ CopyField (TIFFTAG_PREDICTOR, shortv); ++ CopyField (TIFFTAG_PHOTOMETRIC, shortv); ++ CopyField (TIFFTAG_THRESHHOLDING, shortv); ++ CopyField (TIFFTAG_FILLORDER, shortv); ++ CopyField (TIFFTAG_ORIENTATION, shortv); ++ CopyField (TIFFTAG_SAMPLESPERPIXEL, samplesperpixel); ++ CopyField (TIFFTAG_MINSAMPLEVALUE, shortv); ++ CopyField (TIFFTAG_MAXSAMPLEVALUE, shortv); ++ CopyField (TIFFTAG_XRESOLUTION, floatv); ++ CopyField (TIFFTAG_YRESOLUTION, floatv); ++ CopyField (TIFFTAG_GROUP3OPTIONS, longv); ++ CopyField (TIFFTAG_GROUP4OPTIONS, longv); ++ CopyField (TIFFTAG_RESOLUTIONUNIT, shortv); ++ CopyField (TIFFTAG_PLANARCONFIG, shortv); ++ CopyField (TIFFTAG_ROWSPERSTRIP, longv); ++ CopyField (TIFFTAG_XPOSITION, floatv); ++ CopyField (TIFFTAG_YPOSITION, floatv); ++ CopyField (TIFFTAG_IMAGEDEPTH, longv); ++ CopyField (TIFFTAG_TILEDEPTH, longv); ++ CopyField2(TIFFTAG_EXTRASAMPLES, shortv, shortav); ++ CopyField3(TIFFTAG_COLORMAP, red, green, blue); ++ CopyField2(TIFFTAG_PAGENUMBER, shortv, shortv2); ++ CopyField (TIFFTAG_ARTIST, stringv); ++ CopyField (TIFFTAG_IMAGEDESCRIPTION, stringv); ++ CopyField (TIFFTAG_MAKE, stringv); ++ CopyField (TIFFTAG_MODEL, stringv); ++ CopyField (TIFFTAG_SOFTWARE, stringv); ++ CopyField (TIFFTAG_DATETIME, stringv); ++ CopyField (TIFFTAG_HOSTCOMPUTER, stringv); ++ CopyField (TIFFTAG_PAGENAME, stringv); ++ CopyField (TIFFTAG_DOCUMENTNAME, stringv); ++ CopyField2(TIFFTAG_JPEGTABLES, longv, stringv); ++ CopyField (TIFFTAG_YCBCRCOEFFICIENTS, floatav); ++ CopyField2(TIFFTAG_YCBCRSUBSAMPLING, shortv,shortv2); ++ CopyField (TIFFTAG_YCBCRPOSITIONING, shortv); ++ CopyField (TIFFTAG_REFERENCEBLACKWHITE, floatav); + + if (TIFFIsTiled(in)) rv = cpTiles (in, out); + else rv = cpStrips(in, out); @@ -26542,7 +39668,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c /*******************************************/ -@@ -167,6 +413,7 @@ +@@ -167,6 +428,7 @@ PICINFO *pinfo; { byte *pic8; @@ -26550,7 +39676,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c switch (photo) { case PHOTOMETRIC_PALETTE: -@@ -178,7 +425,7 @@ +@@ -178,7 +440,7 @@ case PHOTOMETRIC_MINISWHITE: case PHOTOMETRIC_MINISBLACK: pinfo->colType = (bps==1) ? F_BWDITHER : F_GREYSCALE; @@ -26559,7 +39685,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c bps, photo == PHOTOMETRIC_MINISWHITE ? "min-is-white" : "min-is-black", -@@ -186,9 +433,16 @@ +@@ -186,9 +448,16 @@ break; } @@ -26578,7 +39704,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c if (!pic8) FatalError("loadPalette() - couldn't malloc 'pic8'"); if (loadImage(tif, w, h, pic8, 0)) return pic8; -@@ -205,19 +459,28 @@ +@@ -205,19 +474,28 @@ PICINFO *pinfo; { byte *pic24, *pic8; @@ -26610,11 +39736,33 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c if (!pic24) FatalError("loadColor() - couldn't malloc 'pic24'"); pic8 = (byte *) NULL; -@@ -301,10 +564,10 @@ +@@ -249,7 +527,7 @@ + vsprintf(cp, fmt, ap); + strcat(cp, "."); + +- SetISTR(ISTR_WARNING,buf); ++ SetISTR(ISTR_WARNING, "%s", buf); + + error_occurred = 1; + } +@@ -273,7 +551,7 @@ + vsprintf(cp, fmt, ap); + strcat(cp, "."); + +- SetISTR(ISTR_WARNING,buf); ++ SetISTR(ISTR_WARNING, "%s", buf); + } + + +@@ -301,10 +579,14 @@ static byte **BWmap; static byte **PALmap; -typedef void (*tileContigRoutine) PARM((byte*, u_char*, RGBvalue*, ++/* XXX Work around some collisions with the new library. */ ++#define tileContigRoutine _tileContigRoutine ++#define tileSeparateRoutine _tileSeparateRoutine ++ +typedef void (*tileContigRoutine) PARM((byte*, u_char*, RGBvalue*, uint32, uint32, int, int)); @@ -26623,7 +39771,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c RGBvalue*, uint32, uint32, int, int)); -@@ -312,13 +575,13 @@ +@@ -312,13 +594,13 @@ static int gt PARM((TIFF *, uint32, uint32, byte *)); static uint32 setorientation PARM((TIFF *, uint32)); @@ -26641,7 +39789,16 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c uint32, uint32, int)); static int makebwmap PARM((void)); -@@ -349,18 +612,18 @@ +@@ -340,7 +622,7 @@ + uint32, uint32, int, int)); + static void put4bitbwtile PARM((byte *, u_char *, RGBvalue *, + uint32, uint32, int, int)); +-static void put16bitbwtile PARM((byte *, u_char *, RGBvalue *, ++static void put16bitbwtile PARM((byte *, u_short *, RGBvalue *, + uint32, uint32, int, int)); + + static void putRGBcontig8bittile PARM((byte *, u_char *, RGBvalue *, +@@ -349,22 +631,38 @@ static void putRGBcontig16bittile PARM((byte *, u_short *, RGBvalue *, uint32, uint32, int, int)); @@ -26658,14 +39815,38 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c uint32, uint32, int, int)); - static void initYCbCrConversion PARM((void)); +-static void initYCbCrConversion PARM((void)); ++static void initYCbCrConversion PARM((void)); -static void putRGBContigYCbCrClump PARM((byte *, u_char *, int, int, -+static void putRGBContigYCbCrClump PARM((byte *, u_char *, int, int, - uint32, int, int, int)); +- uint32, int, int, int)); ++static void putRGBContigYCbCrClump PARM((byte *, u_char *, int, int, ++ uint32, int, int, int)); + +-static void putcontig8bitYCbCrtile PARM((byte *, u_char *, RGBvalue *, +- uint32, uint32, int, int)); ++static void putRGBSeparateYCbCrClump PARM((byte *, u_char *, u_char *, ++ u_char *, int, int, uint32, int, ++ int, int)); ++ ++static void putRGBSeparate16bitYCbCrClump PARM((byte *, u_short *, u_short *, ++ u_short *, int, int, uint32, ++ int, int, int)); ++ ++static void putcontig8bitYCbCrtile PARM((byte *, u_char *, RGBvalue *, ++ uint32, uint32, int, int)); ++ ++static void putYCbCrseparate8bittile PARM((byte *, u_char *, u_char *, ++ u_char *, RGBvalue *, ++ uint32, uint32, int, int)); ++ ++static void putYCbCrseparate16bittile PARM((byte *, u_short *, u_short *, ++ u_short *, RGBvalue *, ++ uint32, uint32, int, int)); - static void putcontig8bitYCbCrtile PARM((byte *, u_char *, RGBvalue *, -@@ -382,10 +645,10 @@ + static tileContigRoutine pickTileContigCase PARM((RGBvalue *)); + static tileSeparateRoutine pickTileSeparateCase PARM((RGBvalue *)); +@@ -382,28 +680,28 @@ TIFFGetFieldDefaulted(tif, TIFFTAG_BITSPERSAMPLE, &bitspersample); switch (bitspersample) { @@ -26679,7 +39860,12 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c case 16: break; default: -@@ -397,8 +660,8 @@ + TIFFError(TIFFFileName(tif), +- "Sorry, can not handle %d-bit pictures", bitspersample); ++ "Sorry, cannot handle %d-bit pictures", bitspersample); + return (0); + } + TIFFGetFieldDefaulted(tif, TIFFTAG_SAMPLESPERPIXEL, &samplesperpixel); switch (samplesperpixel) { @@ -26690,7 +39876,28 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c case 4: break; default: -@@ -470,7 +733,7 @@ + TIFFError(TIFFFileName(tif), +- "Sorry, can not handle %d-channel images", samplesperpixel); ++ "Sorry, cannot handle %d-channel images", samplesperpixel); + return (0); + } + +@@ -462,39 +760,81 @@ + uint32 w, h; + byte *raster; + { ++#ifdef USE_LIBJPEG_FOR_TIFF_YCbCr_RGB_CONVERSION ++ u_short compression; ++#endif + u_short minsamplevalue, maxsamplevalue, planarconfig; + RGBvalue *Map; + int bpp = 1, e; + int x, range; + ++#ifdef USE_LIBJPEG_FOR_TIFF_YCbCr_RGB_CONVERSION ++ TIFFGetField(tif, TIFFTAG_COMPRESSION, &compression); ++#endif ++ TIFFGetField(tif, TIFFTAG_PLANARCONFIG, &planarconfig); TIFFGetFieldDefaulted(tif, TIFFTAG_MINSAMPLEVALUE, &minsamplevalue); TIFFGetFieldDefaulted(tif, TIFFTAG_MAXSAMPLEVALUE, &maxsamplevalue); Map = NULL; @@ -26698,10 +39905,56 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c + switch (photometric) { case PHOTOMETRIC_YCBCR: - TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRCOEFFICIENTS, -@@ -481,12 +744,12 @@ - &refBlackWhite); - initYCbCrConversion(); +- TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRCOEFFICIENTS, +- &YCbCrCoeffs); +- TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRSUBSAMPLING, +- &YCbCrHorizSampling, &YCbCrVertSampling); +- TIFFGetFieldDefaulted(tif, TIFFTAG_REFERENCEBLACKWHITE, +- &refBlackWhite); +- initYCbCrConversion(); ++#ifdef USE_LIBJPEG_FOR_TIFF_YCbCr_RGB_CONVERSION ++ if (compression == COMPRESSION_JPEG ++#ifdef LIBTIFF_HAS_OLDJPEG_SUPPORT ++ || compression == COMPRESSION_OJPEG ++#endif ++ ) { ++ /* FIXME: Remove the following test as soon as TIFF Library is fixed! ++ * (Currently [June 2002] this requires supporting patches in both ++ * tif_ojpeg.c and tif_jpeg.c in order to support subsampled YCbCr ++ * images having separated color planes.) */ ++ if (planarconfig == PLANARCONFIG_CONTIG) { ++ /* can rely on libjpeg to convert to RGB (assuming newer libtiff, ++ * compiled with appropriate forms of JPEG support) */ ++ TIFFSetField(tif, TIFFTAG_JPEGCOLORMODE, JPEGCOLORMODE_RGB); ++ photometric = PHOTOMETRIC_RGB; ++ } else { ++ TIFFError(filename, "Cannot handle format"); ++ return (0); ++ } ++ } else ++#endif // USE_LIBJPEG_FOR_TIFF_YCbCr_RGB_CONVERSION ++ { ++ TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRCOEFFICIENTS, &YCbCrCoeffs); ++ TIFFGetFieldDefaulted(tif, TIFFTAG_YCBCRSUBSAMPLING, ++ &YCbCrHorizSampling, &YCbCrVertSampling); ++ ++ /* According to the TIFF specification, if no "ReferenceBlackWhite" ++ * tag is present in the input file, "TIFFGetFieldDefaulted()" returns ++ * default reference black and white levels suitable for PHOTOMETRIC_RGB; ++ * namely: <0,255,0,255,0,255>. But for PHOTOMETRIC_YCBCR in JPEG ++ * images, the usual default (e.g., corresponding to the behavior of the ++ * IJG libjpeg) is: <0,255,128,255,128,255>. Since libtiff doesn't have ++ * a clean, standard interface for making this repair, the following ++ * slightly dirty code installs the default. --Scott Marovich, ++ * Hewlett-Packard Labs, 9/2001. ++ */ ++ if (!TIFFGetField(tif, TIFFTAG_REFERENCEBLACKWHITE, &refBlackWhite)) { ++ TIFFGetFieldDefaulted(tif, TIFFTAG_REFERENCEBLACKWHITE, &refBlackWhite); ++ refBlackWhite[4] = refBlackWhite[2] = 1 << (bitspersample - 1); ++ } ++ TIFFGetFieldDefaulted(tif, TIFFTAG_REFERENCEBLACKWHITE, &refBlackWhite); ++ initYCbCrConversion(); ++ } /* fall thru... */ - + @@ -26714,7 +39967,16 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c /* fall thru... */ case PHOTOMETRIC_MINISBLACK: case PHOTOMETRIC_MINISWHITE: -@@ -509,7 +772,7 @@ + range = maxsamplevalue - minsamplevalue; + Map = (RGBvalue *)malloc((range + 1) * sizeof (RGBvalue)); + if (Map == NULL) { +- TIFFError(filename, +- "No space for photometric conversion table"); ++ TIFFError(filename, "No space for photometric conversion table"); + return (0); + } + +@@ -509,7 +849,7 @@ if (range<256) { for (x=0; x<=range; x++) rmap[x] = gmap[x] = bmap[x] = Map[x]; } else { @@ -26723,7 +39985,25 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c rmap[x] = gmap[x] = bmap[x] = Map[(range*x)/255]; } -@@ -590,6 +853,8 @@ +@@ -529,8 +869,7 @@ + case PHOTOMETRIC_PALETTE: + if (!TIFFGetField(tif, TIFFTAG_COLORMAP, + &redcmap, &greencmap, &bluecmap)) { +- TIFFError(filename, +- "Missing required \"Colormap\" tag"); ++ TIFFError(filename, "Missing required \"Colormap\" tag"); + return (0); + } + +@@ -571,7 +910,6 @@ + return (0); + } + +- TIFFGetField(tif, TIFFTAG_PLANARCONFIG, &planarconfig); + if (planarconfig == PLANARCONFIG_SEPARATE && samplesperpixel > 1) { + e = TIFFIsTiled(tif) ? gtTileSeparate (tif, raster, Map, h, w, bpp) : + gtStripSeparate(tif, raster, Map, h, w, bpp); +@@ -590,6 +928,8 @@ TIFF *tif; uint32 h; { @@ -26732,7 +40012,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c uint32 y; TIFFGetFieldDefaulted(tif, TIFFTAG_ORIENTATION, &orientation); -@@ -613,6 +878,11 @@ +@@ -613,6 +953,11 @@ orientation = ORIENTATION_TOPLEFT; /* fall thru... */ case ORIENTATION_TOPLEFT: @@ -26744,7 +40024,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c y = h-1; break; } -@@ -623,11 +893,11 @@ +@@ -623,11 +968,11 @@ /* @@ -26758,7 +40038,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c /*******************************************/ static int gtTileContig(tif, raster, Map, h, w, bpp) TIFF *tif; -@@ -642,11 +912,14 @@ +@@ -642,11 +987,14 @@ int fromskew, toskew; u_int nrow; tileContigRoutine put; @@ -26774,7 +40054,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c if (buf == 0) { TIFFError(filename, "No space for tile buffer"); return (0); -@@ -655,12 +928,27 @@ +@@ -655,12 +1003,27 @@ TIFFGetField(tif, TIFFTAG_TILEWIDTH, &tw); TIFFGetField(tif, TIFFTAG_TILELENGTH, &th); y = setorientation(tif, h); @@ -26803,7 +40083,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c && stoponerr) break; if (col + tw > w) { -@@ -670,14 +958,18 @@ +@@ -670,14 +1033,18 @@ */ uint32 npix = w - col; fromskew = tw - npix; @@ -26825,7 +40105,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c } free(buf); return (1); -@@ -687,11 +979,11 @@ +@@ -687,11 +1054,11 @@ /* @@ -26839,7 +40119,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c /*******************************************/ static int gtTileSeparate(tif, raster, Map, h, w, bpp) -@@ -701,20 +993,26 @@ +@@ -701,20 +1068,26 @@ uint32 h, w; int bpp; { @@ -26870,7 +40150,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c if (buf == 0) { TIFFError(filename, "No space for tile buffer"); return (0); -@@ -751,10 +1049,10 @@ +@@ -751,10 +1124,10 @@ */ uint32 npix = w - col; fromskew = tw - npix; @@ -26883,7 +40163,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c 0, (int) (toskew*bpp)); } y += (orientation == ORIENTATION_TOPLEFT ? -nrow : nrow); -@@ -768,7 +1066,7 @@ +@@ -768,7 +1141,7 @@ * PlanarConfiguration contiguous if SamplesPerPixel > 1 * or * SamplesPerPixel == 1 @@ -26892,7 +40172,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c /*******************************************/ static int gtStripContig(tif, raster, Map, h, w, bpp) TIFF *tif; -@@ -784,11 +1082,15 @@ +@@ -784,11 +1157,15 @@ uint32 imagewidth; int scanline; int fromskew, toskew; @@ -26910,7 +40190,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c if (buf == 0) { TIFFError(filename, "No space for strip buffer"); return (0); -@@ -828,20 +1130,29 @@ +@@ -828,25 +1205,34 @@ uint32 h, w; int bpp; { @@ -26946,7 +40226,13 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c g = r + stripsize; b = g + stripsize; put = pickTileSeparateCase(Map); -@@ -861,7 +1172,7 @@ + if (put == 0) { +- TIFFError(filename, "Can not handle format"); ++ TIFFError(filename, "Cannot handle format"); + return (0); + } + y = setorientation(tif, h); +@@ -861,7 +1247,7 @@ nrow = (row + rowsperstrip > h ? h - row : rowsperstrip); band = 0; if (TIFFReadEncodedStrip(tif, TIFFComputeStrip(tif, (uint32) row, band), @@ -26955,7 +40241,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c && stoponerr) break; band = 1; -@@ -871,7 +1182,7 @@ +@@ -871,7 +1257,7 @@ band = 2; if (TIFFReadEncodedStrip(tif, TIFFComputeStrip(tif, (uint32) row, band), @@ -26964,7 +40250,16 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c && stoponerr) break; (*put)(raster + y*w*bpp, r, g, b, Map, w, nrow, fromskew, toskew*bpp); -@@ -895,7 +1206,7 @@ +@@ -886,7 +1272,7 @@ + /* + * Greyscale images with less than 8 bits/sample are handled + * with a table to avoid lots of shifts and masks. The table +- * is setup so that put*bwtile (below) can retrieve 8/bitspersample ++ * is set up so that put*bwtile (below) can retrieve 8/bitspersample + * pixel values simply by indexing into the table with one + * number. + */ +@@ -895,7 +1281,7 @@ register int i; int nsamples = 8 / bitspersample; register byte *p; @@ -26973,7 +40268,23 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c BWmap = (byte **)malloc( 256*sizeof (byte *)+(256*nsamples*sizeof(byte))); if (BWmap == NULL) { -@@ -949,7 +1260,7 @@ +@@ -938,18 +1324,18 @@ + + + /* +- * Palette images with <= 8 bits/sample are handled +- * with a table to avoid lots of shifts and masks. The table +- * is setup so that put*cmaptile (below) can retrieve 8/bitspersample +- * pixel values simply by indexing into the table with one +- * number. ++ * Palette images with <= 8 bits/sample are handled with ++ * a table to avoid lots of shifts and masks. The table ++ * is set up so that put*cmaptile (below) can retrieve ++ * (8/bitspersample) pixel-values simply by indexing into ++ * the table with one number. + */ + static int makecmap() + { register int i; int nsamples = 8 / bitspersample; register byte *p; @@ -26982,7 +40293,16 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c PALmap = (byte **)malloc( 256*sizeof (byte *)+(256*nsamples*sizeof(byte))); if (PALmap == NULL) { -@@ -1014,7 +1325,7 @@ +@@ -994,7 +1380,7 @@ + /* + * The following routines move decoded data returned + * from the TIFF library into rasters filled with packed +- * ABGR pixels (i.e. suitable for passing to lrecwrite.) ++ * ABGR pixels (i.e., suitable for passing to lrecwrite.) + * + * The routines have been created according to the most + * important cases and optimized. pickTileContigCase and +@@ -1014,7 +1400,7 @@ #define CASE4(x,op) switch (x) { case 3: op; case 2: op; case 1: op; } #define UNROLL8(w, op1, op2) { \ @@ -26991,7 +40311,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c for (x = w; x >= 8; x -= 8) { \ op1; \ REPEAT8(op2); \ -@@ -1026,7 +1337,7 @@ +@@ -1026,7 +1412,7 @@ } #define UNROLL4(w, op1, op2) { \ @@ -27000,7 +40320,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c for (x = w; x >= 4; x -= 4) { \ op1; \ REPEAT4(op2); \ -@@ -1038,7 +1349,7 @@ +@@ -1038,7 +1424,7 @@ } #define UNROLL2(w, op1, op2) { \ @@ -27009,7 +40329,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c for (x = w; x >= 2; x -= 2) { \ op1; \ REPEAT2(op2); \ -@@ -1048,7 +1359,7 @@ +@@ -1048,7 +1434,7 @@ op2; \ } \ } @@ -27018,16 +40338,16 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c #define SKEW(r,g,b,skew) { r += skew; g += skew; b += skew; } -@@ -1065,7 +1376,7 @@ +@@ -1065,7 +1451,7 @@ int fromskew, toskew; { while (h-- > 0) { - UNROLL8(w,0, *cp++ = PALmap[*pp++][0]); -+ UNROLL8(w, , *cp++ = PALmap[*pp++][0]) ++ UNROLL8(w, , *cp++ = PALmap[*pp++][0]); cp += toskew; pp += fromskew; } -@@ -1082,7 +1393,7 @@ +@@ -1082,7 +1468,7 @@ int fromskew, toskew; { register byte *bw; @@ -27036,7 +40356,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c fromskew /= 2; while (h-- > 0) { UNROLL2(w, bw = PALmap[*pp++], *cp++ = *bw++); -@@ -1103,7 +1414,7 @@ +@@ -1103,7 +1489,7 @@ int fromskew, toskew; { register byte *bw; @@ -27045,7 +40365,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c fromskew /= 4; while (h-- > 0) { UNROLL4(w, bw = PALmap[*pp++], *cp++ = *bw++); -@@ -1123,10 +1434,10 @@ +@@ -1123,10 +1509,10 @@ int fromskew, toskew; { register byte *bw; @@ -27058,7 +40378,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c cp += toskew; pp += fromskew; } -@@ -1164,10 +1475,10 @@ +@@ -1164,10 +1550,10 @@ int fromskew, toskew; { register byte *bw; @@ -27071,7 +40391,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c cp += toskew; pp += fromskew; } -@@ -1184,7 +1495,7 @@ +@@ -1184,7 +1570,7 @@ int fromskew, toskew; { register byte *bw; @@ -27080,7 +40400,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c fromskew /= 4; while (h-- > 0) { UNROLL4(w, bw = BWmap[*pp++], *cp++ = *bw++); -@@ -1204,7 +1515,7 @@ +@@ -1204,7 +1590,7 @@ int fromskew, toskew; { register byte *bw; @@ -27089,7 +40409,14 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c fromskew /= 2; while (h-- > 0) { UNROLL2(w, bw = BWmap[*pp++], *cp++ = *bw++); -@@ -1224,7 +1535,7 @@ +@@ -1218,17 +1604,16 @@ + */ + static void put16bitbwtile(cp, pp, Map, w, h, fromskew, toskew) + byte *cp; +- u_char *pp; ++ u_short *pp; + RGBvalue *Map; + uint32 w, h; int fromskew, toskew; { register uint32 x; @@ -27097,8 +40424,13 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c + while (h-- > 0) { for (x=w; x>0; x--) { - *cp++ = Map[(pp[0] << 8) + pp[1]]; -@@ -1262,11 +1573,11 @@ +- *cp++ = Map[(pp[0] << 8) + pp[1]]; +- pp += 2; ++ *cp++ = Map[*pp++]; + } + cp += toskew; + pp += fromskew; +@@ -1262,7 +1647,7 @@ } } else { while (h-- > 0) { @@ -27107,12 +40439,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c *cp++ = pp[0]; *cp++ = pp[1]; *cp++ = pp[2]; -- pp += samplesperpixel); -+ pp += samplesperpixel) - cp += toskew; - pp += fromskew; - } -@@ -1284,7 +1595,7 @@ +@@ -1284,7 +1669,7 @@ int fromskew, toskew; { register u_int x; @@ -27121,7 +40448,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c fromskew *= samplesperpixel; if (Map) { while (h-- > 0) { -@@ -1320,7 +1631,7 @@ +@@ -1320,7 +1705,7 @@ RGBvalue *Map; uint32 w, h; int fromskew, toskew; @@ -27130,7 +40457,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c { if (Map) { while (h-- > 0) { -@@ -1335,11 +1646,11 @@ +@@ -1335,7 +1720,7 @@ } } else { while (h-- > 0) { @@ -27139,12 +40466,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c *cp++ = *r++; *cp++ = *g++; *cp++ = *b++; -- ); -+ ) - SKEW(r, g, b, fromskew); - cp += toskew; - } -@@ -1357,7 +1668,7 @@ +@@ -1357,7 +1742,7 @@ int fromskew, toskew; { uint32 x; @@ -27153,7 +40475,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c if (Map) { while (h-- > 0) { for (x = w; x > 0; x--) { -@@ -1381,7 +1692,7 @@ +@@ -1381,7 +1766,7 @@ } } @@ -27162,12 +40484,13 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c #define CLAMP(f,min,max) \ (int)((f)+.5 < (min) ? (min) : (f)+.5 > (max) ? (max) : (f)+.5) -@@ -1391,16 +1702,32 @@ +@@ -1390,17 +1775,32 @@ + #define LumaGreen YCbCrCoeffs[1] #define LumaBlue YCbCrCoeffs[2] - static float D1, D2; +-static float D1, D2; -static float D3, D4, D5; -+static float D3, D4 /*, D5 */; ++static float D1, D2, D3, D4 /*, D5 */; static void initYCbCrConversion() @@ -27198,7 +40521,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c } static void putRGBContigYCbCrClump(cp, pp, cw, ch, w, n, fromskew, toskew) -@@ -1412,7 +1739,7 @@ +@@ -1412,7 +1812,7 @@ { float Cb, Cr; int j, k; @@ -27207,7 +40530,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c Cb = Code2V(pp[n], refBlackWhite[2], refBlackWhite[3], 127); Cr = Code2V(pp[n+1], refBlackWhite[4], refBlackWhite[5], 127); for (j = 0; j < ch; j++) { -@@ -1421,8 +1748,24 @@ +@@ -1421,8 +1821,24 @@ Y = Code2V(*pp++, refBlackWhite[0], refBlackWhite[1], 255); R = Y + Cr*D1; @@ -27233,7 +40556,70 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c cp[3*k+0] = CLAMP(R,0,255); cp[3*k+1] = CLAMP(G,0,255); cp[3*k+2] = CLAMP(B,0,255); -@@ -1452,7 +1795,7 @@ +@@ -1432,6 +1848,62 @@ + } + } + ++static void putRGBSeparateYCbCrClump(cp, y, cb, cr, cw, ch, w, n, fromskew, toskew) ++ byte *cp; ++ u_char *y, *cb, *cr; ++ int cw, ch; ++ uint32 w; ++ int n, fromskew, toskew; ++{ ++ float Cb, Cr; ++ int j, k; ++ ++ Cb = Code2V(cb[0], refBlackWhite[2], refBlackWhite[3], 127); ++ Cr = Code2V(cr[0], refBlackWhite[4], refBlackWhite[5], 127); ++ for (j = 0; j < ch; j++) { ++ for (k = 0; k < cw; k++) { ++ float Y, R, G, B; ++ Y = Code2V(y[k], refBlackWhite[0], refBlackWhite[1], 255); ++ R = Y + Cr*D1; ++ G = Y - Cb*D4 - Cr*D2; ++ B = Y + Cb*D3; ++ cp[3*k+0] = CLAMP(R,0,255); ++ cp[3*k+1] = CLAMP(G,0,255); ++ cp[3*k+2] = CLAMP(B,0,255); ++ } ++ cp += w*3 + toskew; ++ y += w + ch*fromskew; ++ } ++} ++ ++static void putRGBSeparate16bitYCbCrClump(cp, y, cb, cr, cw, ch, w, n, fromskew, toskew) ++ byte *cp; ++ u_short *y, *cb, *cr; ++ int cw, ch; ++ uint32 w; ++ int n, fromskew, toskew; ++{ ++ float Cb, Cr; ++ int j, k; ++ ++ Cb = Code2V(cb[0], refBlackWhite[2], refBlackWhite[3], 127); ++ Cr = Code2V(cr[0], refBlackWhite[4], refBlackWhite[5], 127); ++ for (j = 0; j < ch; j++) { ++ for (k = 0; k < cw; k++) { ++ float Y, R, G, B; ++ Y = Code2V(y[k], refBlackWhite[0], refBlackWhite[1], 255); ++ R = Y + Cr*D1; ++ G = Y - Cb*D4 - Cr*D2; ++ B = Y + Cb*D3; ++ cp[3*k+0] = CLAMP(R,0,255); ++ cp[3*k+1] = CLAMP(G,0,255); ++ cp[3*k+2] = CLAMP(B,0,255); ++ } ++ cp += w*3 + toskew; ++ y += w + ch*fromskew; ++ } ++} ++ + #undef LumaBlue + #undef LumaGreen + #undef LumaRed +@@ -1452,7 +1924,7 @@ u_int Coff = YCbCrVertSampling * YCbCrHorizSampling; byte *tp; uint32 x; @@ -27242,7 +40628,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c /* XXX adjust fromskew */ while (h >= YCbCrVertSampling) { tp = cp; -@@ -1481,7 +1824,7 @@ +@@ -1481,19 +1953,122 @@ pp += Coff+2; } if (x > 0) @@ -27251,7 +40637,114 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c (int)Coff, (int)(YCbCrHorizSampling-x),toskew); } } -@@ -1493,7 +1836,7 @@ + + /* ++ * 8-bit unpacked YCbCr samples => RGB ++ */ ++static void putYCbCrseparate8bittile(cp, y, cb, cr, Map, w, h, fromskew, toskew) ++ byte *cp; ++ u_char *y, *cb, *cr; ++ RGBvalue *Map; ++ uint32 w, h; ++ int fromskew, toskew; ++{ ++ uint32 x; ++ int fromskew2 = fromskew/YCbCrHorizSampling; ++ ++ while (h >= YCbCrVertSampling) { ++ for (x = w; x >= YCbCrHorizSampling; x -= YCbCrHorizSampling) { ++ putRGBSeparateYCbCrClump(cp, y, cb, cr, YCbCrHorizSampling, ++ YCbCrVertSampling, w, 0, 0, toskew); ++ cp += 3*YCbCrHorizSampling; ++ y += YCbCrHorizSampling; ++ ++cb; ++ ++cr; ++ } ++ if (x > 0) { ++ putRGBSeparateYCbCrClump(cp, y, cb, cr, (int) x, YCbCrVertSampling, ++ w, 0, (int)(YCbCrHorizSampling - x), toskew); ++ cp += x*3; ++ y += YCbCrHorizSampling; ++ ++cb; ++ ++cr; ++ } ++ cp += (YCbCrVertSampling - 1)*w*3 + YCbCrVertSampling*toskew; ++ y += (YCbCrVertSampling - 1)*w + YCbCrVertSampling*fromskew; ++ cb += fromskew2; ++ cr += fromskew2; ++ h -= YCbCrVertSampling; ++ } ++ if (h > 0) { ++ for (x = w; x >= YCbCrHorizSampling; x -= YCbCrHorizSampling) { ++ putRGBSeparateYCbCrClump(cp, y, cb, cr, YCbCrHorizSampling, (int) h, ++ w, 0, 0, toskew); ++ cp += 3*YCbCrHorizSampling; ++ y += YCbCrHorizSampling; ++ ++cb; ++ ++cr; ++ } ++ if (x > 0) ++ putRGBSeparateYCbCrClump(cp, y, cb, cr, (int) x, (int) h, w, ++ 0, (int)(YCbCrHorizSampling-x),toskew); ++ } ++} ++ ++/* ++ * 16-bit unpacked YCbCr samples => RGB ++ */ ++static void putYCbCrseparate16bittile(cp, y, cb, cr, Map, w, h, fromskew, toskew) ++ byte *cp; ++ u_short *y, *cb, *cr; ++ RGBvalue *Map; ++ uint32 w, h; ++ int fromskew, toskew; ++{ ++ uint32 x; ++ int fromskew2 = fromskew/YCbCrHorizSampling; ++ ++ while (h >= YCbCrVertSampling) { ++ for (x = w; x >= YCbCrHorizSampling; x -= YCbCrHorizSampling) { ++ putRGBSeparate16bitYCbCrClump(cp, y, cb, cr, YCbCrHorizSampling, ++ YCbCrVertSampling, w, 0, 0, toskew); ++ cp += 3*YCbCrHorizSampling; ++ y += YCbCrHorizSampling; ++ ++cb; ++ ++cr; ++ } ++ if (x > 0) { ++ putRGBSeparate16bitYCbCrClump(cp, y, cb, cr, (int) x, YCbCrVertSampling, ++ w, 0, (int)(YCbCrHorizSampling - x), ++ toskew); ++ cp += x*3; ++ y += YCbCrHorizSampling; ++ ++cb; ++ ++cr; ++ } ++ cp += (YCbCrVertSampling - 1)*w*3 + YCbCrVertSampling*toskew; ++ y += (YCbCrVertSampling - 1)*w + YCbCrVertSampling*fromskew; ++ cb += fromskew2; ++ cr += fromskew2; ++ h -= YCbCrVertSampling; ++ } ++ if (h > 0) { ++ for (x = w; x >= YCbCrHorizSampling; x -= YCbCrHorizSampling) { ++ putRGBSeparate16bitYCbCrClump(cp, y, cb, cr, YCbCrHorizSampling, (int) h, ++ w, 0, 0, toskew); ++ cp += 3*YCbCrHorizSampling; ++ y += YCbCrHorizSampling; ++ ++cb; ++ ++cr; ++ } ++ if (x > 0) ++ putRGBSeparate16bitYCbCrClump(cp, y, cb, cr, (int) x, (int) h, w, ++ 0, (int)(YCbCrHorizSampling-x),toskew); ++ } ++} ++ ++/* + * Select the appropriate conversion routine for packed data. + */ + static tileContigRoutine pickTileContigCase(Map) RGBvalue* Map; { tileContigRoutine put = 0; @@ -27260,7 +40753,7 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c switch (photometric) { case PHOTOMETRIC_RGB: switch (bitspersample) { -@@ -1501,7 +1844,7 @@ +@@ -1501,7 +2076,7 @@ case 16: put = (tileContigRoutine) putRGBcontig16bittile; break; } break; @@ -27269,7 +40762,34 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c case PHOTOMETRIC_PALETTE: switch (bitspersample) { case 8: put = put8bitcmaptile; break; -@@ -1544,7 +1887,7 @@ +@@ -1514,7 +2089,7 @@ + case PHOTOMETRIC_MINISWHITE: + case PHOTOMETRIC_MINISBLACK: + switch (bitspersample) { +- case 16: put = put16bitbwtile; break; ++ case 16: put = (tileContigRoutine) put16bitbwtile; break; + case 8: put = putgreytile; break; + case 4: put = put4bitbwtile; break; + case 2: put = put2bitbwtile; break; +@@ -1529,7 +2104,7 @@ + break; + } + +- if (put==0) TIFFError(filename, "Can not handle format"); ++ if (put==0) TIFFError(filename, "Cannot handle format"); + return (put); + } + +@@ -1537,14 +2112,14 @@ + /* + * Select the appropriate conversion routine for unpacked data. + * +- * NB: we assume that unpacked single channel data is directed +- * to the "packed routines. ++ * NB: we assume that unpacked single-channel data is directed ++ * to the "packed" routines. + */ + static tileSeparateRoutine pickTileSeparateCase(Map) RGBvalue* Map; { tileSeparateRoutine put = 0; @@ -27278,9 +40798,52 @@ diff -ruN xv-3.10a/xvtiff.c xv-3.10a-bugfixes/xvtiff.c switch (photometric) { case PHOTOMETRIC_RGB: switch (bitspersample) { -diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c +@@ -1552,12 +2127,41 @@ + case 16: put = (tileSeparateRoutine) putRGBseparate16bittile; break; + } + break; ++ ++ case PHOTOMETRIC_YCBCR: ++ switch (bitspersample) { ++ case 8: put = (tileSeparateRoutine) putYCbCrseparate8bittile; break; ++ case 16: put = (tileSeparateRoutine) putYCbCrseparate16bittile; break; ++ } ++ break; + } + +- if (put==0) TIFFError(filename, "Can not handle format"); ++ if (put==0) TIFFError(filename, "Cannot handle format"); + return (put); + } + + + ++/*******************************************/ ++void ++VersionInfoTIFF() /* GRR 19980605 */ ++{ ++ char temp[1024], *p, *q; ++ ++ strcpy(temp, TIFFGetVersion()); ++ p = temp; ++ while (!isdigit(*p)) ++ ++p; ++ if ((q = strchr(p, '\n')) != NULL) ++ *q = '\0'; ++ ++ fprintf(stderr, " Compiled with libtiff %s", p); ++#ifdef TIFFLIB_VERSION ++ fprintf(stderr, " of %d", TIFFLIB_VERSION); /* e.g., 19960307 */ ++#endif ++ fprintf(stderr, ".\n"); ++} ++ ++ ++ + #endif /* HAVE_TIFF */ +diff -ru xv-3.10a/xvtiffwr.c xv-3.10a-enhancements/xvtiffwr.c --- xv-3.10a/xvtiffwr.c 1995-01-03 13:28:13.000000000 -0800 -+++ xv-3.10a-bugfixes/xvtiffwr.c 2005-03-28 08:39:52.000000000 -0800 ++++ xv-3.10a-enhancements/xvtiffwr.c 2007-05-12 14:07:58.000000000 -0700 @@ -9,15 +9,15 @@ #ifdef HAVE_TIFF @@ -27340,7 +40903,16 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c WaitCursor(); -@@ -84,19 +92,27 @@ +@@ -78,25 +86,36 @@ + TIFFSetField(tif, TIFFTAG_GROUP3OPTIONS, + GROUP3OPT_2DENCODING+GROUP3OPT_FILLBITS); + ++ if (comp == COMPRESSION_LZW) ++ TIFFSetField(tif, TIFFTAG_PREDICTOR, 2); ++ + TIFFSetField(tif, TIFFTAG_PLANARCONFIG, PLANARCONFIG_CONTIG); + TIFFSetField(tif, TIFFTAG_SAMPLESPERPIXEL, 1); + TIFFSetField(tif, TIFFTAG_ORIENTATION, ORIENTATION_TOPLEFT); TIFFSetField(tif, TIFFTAG_ROWSPERSTRIP, h); TIFFSetField(tif, TIFFTAG_RESOLUTIONUNIT, (int)2); @@ -27372,7 +40944,7 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c } else { /* colorstyle == F_GREYSCALE */ -@@ -106,13 +122,13 @@ +@@ -106,13 +125,13 @@ TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8); TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_MINISBLACK); @@ -27390,7 +40962,7 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c free(tpic); } -@@ -123,32 +139,42 @@ +@@ -123,32 +142,42 @@ TIFFSetField(tif, TIFFTAG_BITSPERSAMPLE, 8); TIFFSetField(tif, TIFFTAG_PHOTOMETRIC, PHOTOMETRIC_PALETTE); setupColormap(tif, rmap, gmap, bmap); @@ -27438,7 +41010,7 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c tp = tpic; for (i=0, pix=pic; i<h; i++) { if ((i&15)==0) WaitCursor(); -@@ -167,7 +193,7 @@ +@@ -167,7 +196,7 @@ *tp++ = (byte) (k & 0xff); } } @@ -27447,7 +41019,7 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c free(tpic); } } -@@ -209,16 +235,16 @@ +@@ -209,16 +238,16 @@ { int y; @@ -27467,7 +41039,7 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c "Cancel", infofg, infobg, hicol, locol); y = 55; -@@ -237,7 +263,7 @@ +@@ -237,7 +266,7 @@ XMapSubwindows(theDisp, tiffW); } @@ -27476,7 +41048,7 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c /***************************************************/ void TIFFDialog(vis) -@@ -288,9 +314,9 @@ +@@ -288,9 +317,9 @@ else if (xev->type == KeyPress) { XKeyEvent *e = (XKeyEvent *) xev; @@ -27488,7 +41060,16 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c stlen = XLookupString(e,buf,128,&ks,&status); buf[stlen] = '\0'; -@@ -381,7 +407,7 @@ +@@ -350,7 +379,7 @@ + static void drawTD(x,y,w,h) + int x,y,w,h; + { +- char *title = "Save TIFF file..."; ++ const char *title = "Save TIFF file..."; + int i; + XRectangle xr; + +@@ -381,7 +410,7 @@ /* check BUTTs */ /* check the RBUTTS first, since they don't DO anything */ @@ -27497,7 +41078,7 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c (void) RBTrack(compRB, i); return; } -@@ -417,7 +443,7 @@ +@@ -417,7 +446,7 @@ } } break; @@ -27506,17 +41087,29 @@ diff -ruN xv-3.10a/xvtiffwr.c xv-3.10a-bugfixes/xvtiffwr.c case T_BCANC: TIFFDialog(0); break; default: break; -diff -ruN xv-3.10a/xvxbm.c xv-3.10a-bugfixes/xvxbm.c +diff -ru xv-3.10a/xvxbm.c xv-3.10a-enhancements/xvxbm.c --- xv-3.10a/xvxbm.c 1994-12-22 14:34:41.000000000 -0800 -+++ xv-3.10a-bugfixes/xvxbm.c 2005-03-28 22:06:50.000000000 -0800 -@@ -25,7 +25,7 @@ ++++ xv-3.10a-enhancements/xvxbm.c 2007-05-13 17:45:48.000000000 -0700 +@@ -25,9 +25,9 @@ * move forward to next occurence of '0x' * repeat */ - + +-static int xbmError PARM((char *, char *)); + ++static int xbmError PARM((const char *, const char *)); + + + /*******************************************/ +@@ -44,7 +44,7 @@ + long filesize; + char line[256], name[256]; + byte hex[256]; +- char *bname; ++ const char *bname; - static int xbmError PARM((char *, char *)); + k = 0; @@ -59,7 +59,7 @@ @@ -27563,7 +41156,13 @@ diff -ruN xv-3.10a/xvxbm.c xv-3.10a-bugfixes/xvxbm.c pinfo->h = h; pinfo->normw = pinfo->w; pinfo->normh = pinfo->h; pinfo->type = PIC8; -@@ -125,13 +125,13 @@ +@@ -120,18 +120,18 @@ + /* read/convert the image data */ + + for (i=0, pix=pic8; i<h; i++) +- for (j=0,bit=0; j<w; j++, pix++, bit = (++bit)&7) { ++ for (j=0,bit=0; j<w; j++, pix++, bit = (bit+1)&7) { + if (!bit) { /* get next byte from file. we're already positioned at it */ c = getc(fp); c1 = getc(fp); @@ -27580,7 +41179,7 @@ diff -ruN xv-3.10a/xvxbm.c xv-3.10a-bugfixes/xvxbm.c if (hex[c] == 255) k = 0; /* no digits after the '0x' ... */ else k = hex[c]; } -@@ -149,7 +149,7 @@ +@@ -149,13 +149,13 @@ fclose(fp); return 1; @@ -27589,6 +41188,13 @@ diff -ruN xv-3.10a/xvxbm.c xv-3.10a-bugfixes/xvxbm.c + /*******************************************/ + static int xbmError(fname, st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING,"%s: %s", fname, st); + return 0; @@ -172,7 +172,7 @@ { /* pic is expected to be an array of w*h bytes, each of which is either @@ -27598,7 +41204,14 @@ diff -ruN xv-3.10a/xvxbm.c xv-3.10a-bugfixes/xvxbm.c considered black, and the other one, white. Some sort of stippling algorithm should've been called already to produce pic, otherwise the output won't be at all -@@ -188,7 +188,7 @@ +@@ -182,13 +182,12 @@ + byte *pix; + char name[256], *foo; + +- foo = BaseName(fname); +- strcpy(name, foo); ++ strcpy(name, BaseName(fname)); + foo = (char *) index(name,'.'); if (foo) *foo='\0'; /* truncated name at first '.' */ @@ -27607,9 +41220,9 @@ diff -ruN xv-3.10a/xvxbm.c xv-3.10a-bugfixes/xvxbm.c fprintf(fp,"#define %s_height %d\n",name,h); fprintf(fp,"static char %s_bits[] = {\n",name); -diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c +diff -ru xv-3.10a/xvxpm.c xv-3.10a-enhancements/xvxpm.c --- xv-3.10a/xvxpm.c 1994-12-22 14:34:42.000000000 -0800 -+++ xv-3.10a-bugfixes/xvxpm.c 2005-03-28 22:22:50.000000000 -0800 ++++ xv-3.10a-enhancements/xvxpm.c 2007-05-13 17:52:21.000000000 -0700 @@ -10,7 +10,7 @@ * format images. * @@ -27619,7 +41232,18 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c */ #define VALUES_LEN 80 /* Max length of values line */ -@@ -63,7 +63,7 @@ +@@ -48,8 +48,8 @@ + /* a quoted string? */ + + /* Local Functions */ +-static int XpmLoadError PARM((char*, char*)); +-static int XpmGetc PARM((FILE*)); ++static int XpmLoadError PARM((const char *, const char *)); ++static int XpmGetc PARM((FILE *)); + static int hash PARM((char *)); + static int hash_init PARM((int)); + static int hash_insert PARM((hentry *)); +@@ -63,110 +63,128 @@ PICINFO *pinfo; { /* returns '1' on success */ @@ -27628,7 +41252,10 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c FILE *fp; hentry item; int c; -@@ -73,100 +73,110 @@ +- char *bname; ++ const char *bname; + char values[VALUES_LEN]; + byte *pic; byte *i_sptr; /* image search pointer */ long filesize; int w, h, nc, cpp, line_pos; @@ -27758,14 +41385,32 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c + do { char key[3]; - char color[40]; /* Need to figure a good size for this... */ +- char color[40]; /* Need to figure a good size for this... */ - short hd; /* Hex digits per R, G, or B */ - ++ char color[80]; /* Need to figure a good size for this... */ ++ ++/* ++ * Problem with spaces in color names ++ * ++ * X s Color Name m Other Name c Last Name ++ * ++ * ... this parser doesn't find `Any Name' ++ */ + for (j=0; j<2 && (c != ' ') && (c != '\t') && (c != EOF); j++) { key[j] = c; c = XpmGetc(fp); -@@ -185,14 +195,14 @@ +@@ -177,7 +195,7 @@ + if (c == EOF) /* The failure condition of getc() */ + return (XpmLoadError(bname, "Error parsing colormap line")); + +- for (j=0; j<39 && (c!=' ') && (c!='\t') && (c!='"') && c!=EOF; j++) { ++ for (j=0; j<79 && (c!=' ') && (c!='\t') && (c!='"') && c!=EOF; j++) { + color[j] = c; + c = XpmGetc(fp); + } +@@ -185,14 +203,14 @@ while ((c == ' ') || (c == '\t')) c = XpmGetc(fp); @@ -27783,7 +41428,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c if (XParseColor(theDisp,theCmap,color,&col)) { if (pinfo->type == PIC8) { pinfo->r[i] = col.red >> 8; -@@ -201,8 +211,8 @@ +@@ -201,8 +219,8 @@ c_sptr->cv_index = i; /* Is there a better way to do this? */ @@ -27794,7 +41439,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c if (pinfo->r[i] == pinfo->g[i] && pinfo->g[i] == pinfo->b[i]) /* Still greyscale... */ -@@ -210,9 +220,9 @@ +@@ -210,9 +228,9 @@ else /* It's color */ pinfo->colType = F_FULLCOLOR; @@ -27806,7 +41451,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c if ((pinfo->r[i] == 0 || pinfo->r[i] == 0xff) && (pinfo->g[i] == 0 || pinfo->g[i] == 0xff) && (pinfo->b[i] == 0 || pinfo->b[i] == 0xff)) -@@ -221,10 +231,12 @@ +@@ -221,10 +239,12 @@ else /* It's greyscale */ pinfo->colType = F_GREYSCALE; @@ -27821,7 +41466,14 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c } else { /* PIC24 */ c_sptr->cv_rgb[0] = col.red >> 8; -@@ -242,7 +254,7 @@ +@@ -236,13 +256,13 @@ + else { /* 'None' or unrecognized color spec */ + int rgb; + +- if (strcmp(color, "None") == 0) rgb = 0xb2c0dc; /* infobg */ ++ if (strcasecmp(color, "None") == 0) rgb = 0xb2c0dc; /* infobg */ + else { + SetISTR(ISTR_INFO, "%s: unknown color spec '%s'", bname, color); Timer(1000); rgb = 0x808080; } @@ -27830,7 +41482,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c if (pinfo->type == PIC8) { pinfo->r[i] = (rgb>>16) & 0xff; pinfo->g[i] = (rgb>> 8) & 0xff; -@@ -256,39 +268,39 @@ +@@ -256,39 +276,39 @@ } } @@ -27879,7 +41531,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c for (k = 0 ; k < cpp ; k++) pixel[k] = XpmGetc(fp); pixel[k] = '\0'; -@@ -300,7 +312,7 @@ +@@ -300,7 +320,7 @@ pixel); return (XpmLoadError(bname, "Can't map resolve into colormap")); } @@ -27888,11 +41540,14 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c if (pinfo->type == PIC8) *i_sptr++ = mapentry->cv_index; else { -@@ -310,27 +322,27 @@ +@@ -309,35 +329,36 @@ + *i_sptr++ = mapentry->cv_rgb[2]; } } /* for ( j < w ) */ - (void)XpmGetc(fp); /* Throw away the close " */ +- (void)XpmGetc(fp); /* Throw away the close " */ - ++ while (((c = XpmGetc(fp))!=EOF) && /* Throw away the close " and */ ++ (c != '"')); /* erase all remaining pixels */ + if (!(i%7)) WaitCursor(); } /* for ( i < h ) */ @@ -27922,7 +41577,15 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c return(1); } -@@ -349,17 +361,17 @@ + + /***************************************/ + static int XpmLoadError(fname, st) +- char *fname, *st; ++ const char *fname, *st; + { + SetISTR(ISTR_WARNING, "%s: %s", fname, st); + return 0; +@@ -349,17 +370,17 @@ FILE *f; { int c, d, lastc; @@ -27943,7 +41606,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c if (c == '"') in_quote = !in_quote; else if (!in_quote && c == '/') { /* might be a C-style comment */ -@@ -389,14 +401,14 @@ +@@ -389,14 +410,14 @@ /***************************************/ @@ -27960,7 +41623,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c sum = sum % hash_len; return (sum); } -@@ -414,7 +426,7 @@ +@@ -414,7 +435,7 @@ */ int i; @@ -27969,7 +41632,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c hash_len = 257; hashtab = (hentry **) malloc(sizeof(hentry *) * hash_len); -@@ -425,7 +437,7 @@ +@@ -425,7 +446,7 @@ for (i = 0 ; i < hash_len ; i++) hashtab[i] = NULL; @@ -27978,7 +41641,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c return 1; } -@@ -436,22 +448,22 @@ +@@ -436,22 +457,22 @@ { int key; hentry *tmp; @@ -28007,7 +41670,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c return 1; } -@@ -462,9 +474,9 @@ +@@ -462,9 +483,9 @@ { int key; hentry *tmp; @@ -28019,7 +41682,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c tmp = hashtab[key]; while (tmp && strcmp(token, tmp->token)) { tmp = tmp->next; -@@ -479,7 +491,7 @@ +@@ -479,7 +500,7 @@ { int i; hentry *tmp; @@ -28028,7 +41691,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c for (i=0; i<hash_len; i++) { while (hashtab[i]) { tmp = hashtab[i]->next; -@@ -487,7 +499,7 @@ +@@ -487,7 +508,7 @@ hashtab[i] = tmp; } } @@ -28037,7 +41700,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c free(hashtab); return; } -@@ -508,10 +520,10 @@ +@@ -508,10 +529,10 @@ /* Note here, that tokenchars is assumed to contain 64 valid token */ /* characters. It's hardcoded to assume this for benefit of generating */ /* tokens, when there are more than 64^2 colors. */ @@ -28046,11 +41709,11 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c short i, imax, j; /* for() loop indices */ short cpp = 0; - char *tokenchars = -+ char *tokenchars = ++ const char *tokenchars = ".#abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789"; char *tokens; char image_name[256], *foo; -@@ -523,20 +535,21 @@ +@@ -523,20 +544,20 @@ long li; /* for() loop index */ int numcol; #endif @@ -28064,10 +41727,11 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c else printf("WriteXPM(): Write a colortype %d, PIC24 image.\n", col); - +- foo = BaseName(name); +- strcpy(image_name, foo); + } + - foo = BaseName(name); - strcpy(image_name, foo); ++ strcpy(image_name, BaseName(name)); foo = (char *)strchr(image_name, '.'); if (foo) *foo = '\0'; /* Truncate name at first '.' */ @@ -28076,7 +41740,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c #ifdef USE_UNFINISHED_24BIT_WRITING_CODE if (ptype == PIC24) return -1; -@@ -547,15 +560,15 @@ +@@ -547,15 +568,15 @@ /* 'packed'. Code in here to do that should be removed if */ /* Conv24to8 is "fixed" to do this... */ /* Chris P. Ross (cross@eng.umd.edu) 28-Sept-94 */ @@ -28095,7 +41759,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c "%s: Unable to convert to 8-bit image in WriteXPM()", image_name); return 1; -@@ -594,7 +607,7 @@ +@@ -594,7 +615,7 @@ } #endif @@ -28104,7 +41768,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c #ifdef USE_UNFINISHED_24BIT_WRITING_CODE if (ptype == PIC24) cpp = 4; else if (numcol > 64) cpp = 2; -@@ -609,7 +622,7 @@ +@@ -609,7 +630,7 @@ fprintf(fp, "/* width height num_colors chars_per_pixel */\n"); fprintf(fp, "\" %3d %3d %6d %1d\",\n", w, h, numcol, cpp); fprintf(fp, "/* colors */\n"); @@ -28113,7 +41777,7 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c switch (cpp) { case 1: /* <= 64 colors; index into tokenchars */ -@@ -681,12 +694,12 @@ +@@ -681,12 +702,12 @@ case 4: /* Generate a colormap */ @@ -28128,9 +41792,9 @@ diff -ruN xv-3.10a/xvxpm.c xv-3.10a-bugfixes/xvxpm.c if (fprintf(fp, "\"\n};\n") == EOF) { return 1; } else -diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c +diff -ru xv-3.10a/xvxwd.c xv-3.10a-enhancements/xvxwd.c --- xv-3.10a/xvxwd.c 1994-12-22 14:34:40.000000000 -0800 -+++ xv-3.10a-bugfixes/xvxwd.c 2005-03-28 22:37:07.000000000 -0800 ++++ xv-3.10a-enhancements/xvxwd.c 2007-05-13 17:52:35.000000000 -0700 @@ -1,10 +1,10 @@ -/* +/* @@ -28144,18 +41808,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c ** (e.g. DEC Alphas), 04/10/94 ** ** Copyright (C) 1989, 1991 by Jef Poskanzer. -@@ -19,47 +19,53 @@ - */ - - #include "xv.h" -+#include <limits.h> /* for CHAR_BIT */ -+ -+/* SJT: just in case ... */ -+#ifndef CHAR_BIT -+# define CHAR_BIT 8 -+#endif - - +@@ -24,42 +24,42 @@ /***************************** x11wd.h *****************************/ #define X11WD_FILE_VERSION 7 typedef struct { @@ -28227,7 +41880,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c /*-------------------------------------------------------------------------*/ -@@ -67,7 +73,7 @@ +@@ -67,32 +67,35 @@ typedef byte pixel; /* local functions */ @@ -28235,8 +41888,13 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c +static int getinit PARM((FILE *, int*, int*, int*, CARD32 *, CARD32, PICINFO *)); static CARD32 getpixnum PARM((FILE *)); - static int xwdError PARM((char *)); -@@ -78,19 +84,27 @@ +-static int xwdError PARM((char *)); +-static void xwdWarning PARM((char *)); ++static int xwdError PARM((const char *)); ++static void xwdWarning PARM((const char *)); + static int bs_short PARM((int)); + static CARD32 bs_long PARM((CARD32)); + static int readbigshort PARM((FILE *, CARD16 *)); static int readbiglong PARM((FILE *, CARD32 *)); static int readlittleshort PARM((FILE *, CARD16 *)); static int readlittlelong PARM((FILE *, CARD32 *)); @@ -28244,17 +41902,11 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c static int writebigshort PARM((FILE *, int)); static int writebiglong PARM((FILE *, CARD32)); +#endif -+ -+static void getcolorshift PARM((CARD32, int *, int *)); /* SJT */ -+/* SJT: for 16bpp and 24bpp shifts */ -+static int red_shift_right, red_justify_left, -+ grn_shift_right, grn_justify_left, -+ blu_shift_right, blu_justify_left; static byte *pic8, *pic24; --static CARD32 red_mask, green_mask, blue_mask; + static CARD32 red_mask, green_mask, blue_mask; -static int bits_per_item, bits_used, bit_shift, bits_per_pixel; -+static CARD32 red_mask, grn_mask, blu_mask; ++static int red_shift, green_shift, blue_shift; +static int bits_per_item, bits_used, bit_shift, + bits_per_pixel, bits_per_rgb; static char buf[4]; @@ -28265,18 +41917,25 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c static int byte_swap, byte_order, bit_order, filesize; -static byte bw[2] = {0, 0xff}; - static char *bname; +-static char *bname; ++static const char *bname; + -@@ -105,7 +119,7 @@ + +@@ -105,33 +108,38 @@ pixel *xP; int col; - int rows, cols, padright, row; -+ int rows, cols, padright, row, npixels, bufsize; - CARD32 maxval, visualclass; +- CARD32 maxval, visualclass; ++ int rows=0, cols=0, padright=0, row, npixels, bufsize; ++ CARD32 maxval=0, visualclass=0; FILE *ifp; -@@ -116,22 +130,28 @@ + bname = BaseName(fname); + pinfo->pic = (byte *) NULL; + pinfo->comment = (char *) NULL; +- maxval = 0; ifp = xv_fopen(fname, "r"); if (!ifp) return (xwdError("can't open file")); @@ -28308,7 +41967,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c if (!pic8) { xwdError("couldn't malloc 'pic'"); return 0; -@@ -140,18 +160,18 @@ +@@ -140,18 +148,18 @@ for (row=0; row<rows; row++) { for (col=0, xP=pic8+(row*cols); col<cols; col++, xP++) *xP = getpixnum(ifp); @@ -28330,7 +41989,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c if (!pic8) { xwdError("couldn't malloc 'pic'"); return 0; -@@ -162,15 +182,20 @@ +@@ -162,59 +170,70 @@ *xP = getpixnum(ifp); for (col=0; col<padright; col++) getpixnum(ifp); } @@ -28354,14 +42013,14 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c if (!pic24) { xwdError("couldn't malloc 'pic24'"); return 0; -@@ -179,42 +204,44 @@ - for (row=0; row<rows; row++) { - for (col=0, xP=pic24+(row*cols*3); col<cols; col++) { - CARD32 ul; + } + +- for (row=0; row<rows; row++) { +- for (col=0, xP=pic24+(row*cols*3); col<cols; col++) { +- CARD32 ul; - -+ - ul = getpixnum(ifp); - switch (bits_per_pixel) { +- ul = getpixnum(ifp); +- switch (bits_per_pixel) { - case 16: - *xP++ = ((ul & red_mask) >> 0); - *xP++ = ((ul & green_mask) >> 5); @@ -28375,29 +42034,44 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c - *xP++ = (ul>>16) & 0xff; - break; - -+ case 16: -+ case 24: -+ case 32: -+ /* SJT: shift all the way to the right and then shift left. The -+ pairs of shifts could be combined. There will be two right and -+ one left shift, but it's unknown which will be which. It seems -+ easier to do the shifts (which might be 0) separately than to -+ have a complex set of tests. I believe this is independent of -+ byte order but I have no way to test. -+ */ -+ *xP++ = ((ul & red_mask) >> red_shift_right) << red_justify_left; -+ *xP++ = ((ul & grn_mask) >> grn_shift_right) << grn_justify_left; -+ *xP++ = ((ul & blu_mask) >> blu_shift_right) << blu_justify_left; -+ break; -+ - default: +- default: - xwdError("True/Direct only supports 16, 24, and 32 bits"); -+ xwdError("True/Direct supports only 16, 24, and 32 bits"); - return 0; - } - } +- return 0; +- } +- } ++ switch (bits_per_pixel) { ++ case 16: ++ case 24: ++ case 32: ++ ; ++ default: ++ xwdError("True/Direct supports only 16, 24, and 32 bits"); ++ return 0; ++ } - for (col=0; col<padright; col++) getpixnum(ifp); +- for (col=0; col<padright; col++) getpixnum(ifp); ++ if (byte_order == MSBFirst) { ++ for (row=0; row<rows; row++) { ++ for (col=0, xP=pic24+(row*cols*3); col<cols; col++) { ++ register CARD32 ul = getpixnum(ifp); ++ ++ *xP++ = ul >> red_shift & red_mask ; ++ *xP++ = ul >> green_shift & green_mask; ++ *xP++ = ul >> blue_shift & blue_mask ; ++ }; ++ for (col=0; col<padright; col++) getpixnum(ifp); ++ } ++ } else { ++ for (row=0; row<rows; row++) { ++ for (col=0, xP=pic24+(row*cols*3); col<cols; col++) { ++ register CARD32 ul = getpixnum(ifp); ++ ++ *xP++ = ul >> blue_shift & blue_mask ; ++ *xP++ = ul >> green_shift & green_mask; ++ *xP++ = ul >> red_shift & red_mask ; ++ }; ++ for (col=0; col<padright; col++) getpixnum(ifp); ++ } } - + @@ -28417,7 +42091,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c ((visualclass == StaticGray ) ? "StaticGray" : (visualclass == GrayScale ) ? "GrayScale" : (visualclass == StaticColor) ? "StaticColor" : -@@ -258,10 +285,10 @@ +@@ -258,10 +277,10 @@ maxv = 255L; h11P = (X11WDFileHeader*) header; @@ -28430,7 +42104,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c if (h11P->file_version != X11WD_FILE_VERSION) { byte_swap = 1; h11P->header_size = bs_long(h11P->header_size); -@@ -279,8 +306,8 @@ +@@ -279,8 +298,8 @@ h11P->bytes_per_line = bs_long(h11P->bytes_per_line); h11P->visual_class = bs_long(h11P->visual_class); h11P->red_mask = bs_long(h11P->red_mask); @@ -28441,7 +42115,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c h11P->bits_per_rgb = bs_long(h11P->bits_per_rgb); h11P->colormap_entries = bs_long(h11P->colormap_entries); h11P->ncolors = bs_long(h11P->ncolors); -@@ -294,7 +321,7 @@ +@@ -294,7 +313,7 @@ for (i=0; i<h11P->header_size - sizeof(*h11P); i++) if (getc(file) == EOF) return(xwdError("couldn't read rest of X11 XWD file header")); @@ -28450,21 +42124,23 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c /* Check whether we can handle this dump. */ if (h11P->pixmap_depth > 24) return(xwdError("can't handle X11 pixmap_depth > 24")); -@@ -303,27 +330,31 @@ +@@ -303,27 +322,31 @@ return(xwdError("can't handle X11 bits_per_rgb > 24")); if (h11P->pixmap_format != ZPixmap && h11P->pixmap_depth != 1) { - sprintf(errstr, "can't handle X11 pixmap_format %d with depth != 1", +- h11P->pixmap_format); + sprintf(errstr, "can't handle X11 pixmap_format %ld with depth != 1", - h11P->pixmap_format); ++ (long)h11P->pixmap_format); return(xwdError(errstr)); } if (h11P->bitmap_unit != 8 && h11P->bitmap_unit != 16 && h11P->bitmap_unit != 32) { - sprintf(errstr, "X11 bitmap_unit (%d) is non-standard - can't handle", +- h11P->bitmap_unit); + sprintf(errstr, "X11 bitmap_unit (%ld) is non-standard - can't handle", - h11P->bitmap_unit); ++ (long)h11P->bitmap_unit); return(xwdError(errstr)); } - @@ -28489,7 +42165,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c if (word64) { for (i = 0; i < h11P->ncolors; ++i) { if (fread(&pad, sizeof(pad), (size_t) 1, file ) != 1) -@@ -334,11 +365,11 @@ +@@ -334,11 +357,11 @@ } } else { @@ -28503,20 +42179,20 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c for (i = 0; i < h11P->ncolors; ++i) { if (byte_swap) { x11colors[i].red = (CARD16) bs_short(x11colors[i].red); -@@ -356,8 +387,11 @@ +@@ -356,8 +379,11 @@ grayscale = 0; } } - + *visualclassP = h11P->visual_class; -+ /* SJT: FIXME. If bits_per_pixel == 16 maxv could be either 31 or 63. ++ /* SJT: FIXME. If bits_per_pixel == 16, maxv could be either 31 or 63. + It doesn't matter, though, because maxv is never used beyond here. + */ if (*visualclassP == TrueColor || *visualclassP == DirectColor) { if (h11P->bits_per_pixel == 16) maxv = 31; else maxv = 255; -@@ -389,24 +423,48 @@ +@@ -389,24 +415,58 @@ } } } @@ -28551,7 +42227,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c + + + /* which raises the question: how (can?) you ever have a 24 bits per pix, -+ (ie, 3 bytes, no alpha/padding) */ ++ (i.e., 3 bytes, no alpha/padding) */ + + + bits_used = bits_per_item; @@ -28559,65 +42235,30 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c if (bits_per_pixel == sizeof(pixel_mask) * 8) pixel_mask = (CARD32) -1; else pixel_mask = (1 << bits_per_pixel) - 1; - -- red_mask = h11P->red_mask; ++ + red_mask = h11P->red_mask; - green_mask = h11P->green_mask; - blue_mask = h11P->blue_mask; ++ green_mask = h11P->grn_mask; ++ blue_mask = h11P->blu_mask; + -+ red_mask = h11P->red_mask; -+ grn_mask = h11P->grn_mask; -+ blu_mask = h11P->blu_mask; -+ -+ getcolorshift(red_mask, &red_shift_right, &red_justify_left); -+ getcolorshift(grn_mask, &grn_shift_right, &grn_justify_left); -+ getcolorshift(blu_mask, &blu_shift_right, &blu_justify_left); - - byteP = (char *) buf; - shortP = (CARD16 *) buf; -@@ -416,18 +474,57 @@ - } - - -+/* SJT: figure out the proper shifts */ -+static void getcolorshift (CARD32 mask, int *rightshift, int *leftshift) -+{ -+ int lshift, rshift; -+ unsigned int uu; -+ -+ if (mask == 0) -+ { -+ *rightshift = *leftshift = 0; -+ return; ++ red_shift = blue_shift = green_shift = 0; ++ while (!(red_mask & 1)) { ++ red_mask >>= 1; ++ ++red_shift; + } -+ -+ uu = mask; -+ lshift = rshift = 0; -+ while ((uu & 0xf) == 0) -+ { -+ rshift += 4; -+ uu >>= 4; ++ while (!(blue_mask & 1)) { ++ blue_mask >>= 1; ++ ++blue_shift; + } -+ while ((uu & 1) == 0) -+ { -+ rshift++; -+ uu >>= 1; ++ while (!(green_mask & 1)) { ++ green_mask >>= 1; ++ ++green_shift; + } -+ -+ while (uu != 0) -+ { -+ if (uu & 1) -+ { -+ lshift++; -+ uu >>= 1; -+ } -+ } -+ *rightshift = rshift; -+ *leftshift = CHAR_BIT * sizeof(pixel) - lshift; -+ return; -+} -+ -+ - /******************************/ - static CARD32 getpixnum(file) + + byteP = (char *) buf; + shortP = (CARD16 *) buf; +@@ -421,13 +481,13 @@ FILE* file; { int n; @@ -28633,7 +42274,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c case 16: if (byte_order == MSBFirst) { if (readbigshort(file, shortP) == -1) -@@ -438,7 +535,7 @@ +@@ -438,7 +498,7 @@ xwdWarning("unexpected EOF"); } break; @@ -28642,7 +42283,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c case 32: if (byte_order == MSBFirst) { if (readbiglong(file, longP) == -1) -@@ -449,41 +546,41 @@ +@@ -449,48 +509,48 @@ xwdWarning("unexpected EOF"); } break; @@ -28692,7 +42333,24 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c return n; } -@@ -511,7 +608,7 @@ + + /***************************/ + static int xwdError(st) +- char *st; ++ const char *st; + { + if (pic8 != NULL) free(pic8); + if (pic24 != NULL) free(pic24); +@@ -502,7 +562,7 @@ + + /***************************/ + static void xwdWarning(st) +- char *st; ++ const char *st; + { + SetISTR(ISTR_WARNING,"%s: %s", bname, st); + } +@@ -511,7 +571,7 @@ @@ -28701,7 +42359,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c * Byte-swapping junk. */ -@@ -537,7 +634,7 @@ +@@ -537,7 +597,7 @@ { union cheat u; unsigned char t; @@ -28710,7 +42368,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c u.l = l; t = u.c[0]; u.c[0] = u.c[3]; u.c[3] = t; t = u.c[1]; u.c[1] = u.c[2]; u.c[2] = t; -@@ -549,7 +646,7 @@ +@@ -549,7 +609,7 @@ @@ -28719,7 +42377,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c * Endian I/O. */ -@@ -584,7 +681,7 @@ +@@ -584,7 +644,7 @@ { *sP = getc(in) & 0xff; *sP |= (getc(in) & 0xff) << 8; @@ -28728,7 +42386,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c if (ferror(in)) return -1; return 0; } -@@ -604,6 +701,7 @@ +@@ -604,6 +664,7 @@ } @@ -28736,7 +42394,7 @@ diff -ruN xv-3.10a/xvxwd.c xv-3.10a-bugfixes/xvxwd.c static int writebiglong(out, l) FILE* out; CARD32 l; -@@ -624,3 +722,4 @@ +@@ -624,3 +685,4 @@ putc(s&0xff, out); return 0; } diff --git a/source/xap/xv/xv.SlackBuild b/source/xap/xv/xv.SlackBuild index 3ef40a7ba..95042cd8b 100755 --- a/source/xap/xv/xv.SlackBuild +++ b/source/xap/xv/xv.SlackBuild @@ -21,8 +21,17 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=3.10a -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-5} +BUILD=${BUILD:-6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -33,16 +42,18 @@ mkdir -p $TMP $PKG cd $TMP rm -rf xv-3.10 -tar xvf $CWD/xv-3.10.tar.gz || exit 1 +tar xvf $CWD/xv-3.10.tar.?z* || exit 1 cd xv-3.10 || exit 1 chown -R root:root . -zcat $CWD/xv-3.10a.patch.gz | patch -p0 --verbose --backup --suffix=.orig || exit -bzcat $CWD/xv-3.10a-jumbo-fix-patch-20050410.txt.bz2 | patch -p1 --verbose --backup --suffix=.orig || exit -bzcat $CWD/xv-3.10a-jumbo-enh-patch-20050501.txt.bz2 | patch -p1 --verbose --backup --suffix=.orig || exit -zcat $CWD/xv.prefix.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit +zcat $CWD/xv-3.10a.patch.gz | patch -p0 --verbose --backup --suffix=.orig || exit 1 +bzcat $CWD/xv-3.10a-jumbo-fix-enh-patch-20070520.txt.bz2 | patch -p1 --verbose --backup --suffix=.orig || exit 1 +bzcat $CWD/xv-3.10a-jumbo-additions.diff.bz2 | patch -p1 --verbose --backup --suffix=.orig || exit 1 +bzcat $CWD/xv-3.10a-enhancements.20070520-20081216.diff.bz2 | patch -p1 --verbose --backup --suffix=.orig || exit 1 +zcat $CWD/xv.prefix.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 if [ "$ARCH" = "x86_64" ]; then - zcat $CWD/xv.prefix_x86_64.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit + zcat $CWD/xv.prefix_x86_64.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 fi +zcat $CWD/xv.jasper.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1 make -f Makefile.std strip --strip-unneeded bggen vdcomp xcmap xv xvpictoppm mkdir -p $PKG/usr/bin diff --git a/source/xap/xv/xv.jasper.diff b/source/xap/xv/xv.jasper.diff new file mode 100644 index 000000000..8e933ee5a --- /dev/null +++ b/source/xap/xv/xv.jasper.diff @@ -0,0 +1,20 @@ +--- ./Makefile.std.orig 2010-02-19 13:24:58.000000000 -0600 ++++ ./Makefile.std 2010-02-19 13:27:20.000000000 -0600 +@@ -179,13 +179,13 @@ + JP2K = -DDOJP2K + ### + #JP2KDIR = ../../jasper +-JP2KDIR = /usr/local/lib ++JP2KDIR = /usr + ### + #JP2KINC = -I$(JP2KDIR) +-JP2KINC = -I/usr/local/include ++JP2KINC = -I/usr/include + ### +-#JP2KLIB = -L$(JP2KDIR) -ljasper +-JP2KLIB = $(JP2KDIR)/libjasper.a ++JP2KLIB = -L$(JP2KDIR) -ljasper ++#JP2KLIB = $(JP2KDIR)/libjasper.a + + + ### diff --git a/source/xap/xv/xv.prefix.diff b/source/xap/xv/xv.prefix.diff index 0e6108333..7d57757a9 100644 --- a/source/xap/xv/xv.prefix.diff +++ b/source/xap/xv/xv.prefix.diff @@ -1,11 +1,11 @@ ---- ./Makefile.std.orig 2005-07-12 15:15:19.000000000 -0700 -+++ ./Makefile.std 2005-07-12 15:16:08.000000000 -0700 -@@ -41,7 +41,7 @@ - - - ### Installation locations +--- ./Makefile.std.orig 2010-02-19 13:12:10.000000000 -0600 ++++ ./Makefile.std 2010-02-19 13:14:50.000000000 -0600 +@@ -56,7 +56,7 @@ + ### NOTE: Users of old K&R compilers (i.e., any version not supporting C89 + ### string concatenation, such as "fub" "ar" => "fubar") should update + ### xvtext.c:1831 (or thereabouts) if either PREFIX or DOCDIR changes: -PREFIX = /usr/local -+PREFIX = /usr/X11R6 ++PREFIX = /usr BINDIR = $(PREFIX)/bin - MANDIR = $(PREFIX)/man/man1 + MANDIR = $(PREFIX)/share/man/man1 MANSUF = 1 diff --git a/source/xap/xv/xv.prefix_x86_64.diff b/source/xap/xv/xv.prefix_x86_64.diff index fd6803d50..8f629c344 100644 --- a/source/xap/xv/xv.prefix_x86_64.diff +++ b/source/xap/xv/xv.prefix_x86_64.diff @@ -1,20 +1,20 @@ ---- xv-3.10/Makefile.std.orig 2008-11-06 22:16:03.000000000 +0000 -+++ xv-3.10/Makefile.std 2008-11-06 22:24:11.000000000 +0000 -@@ -46,7 +46,7 @@ - MANDIR = $(PREFIX)/man/man1 +--- ./Makefile.std.orig 2010-02-19 13:15:05.000000000 -0600 ++++ ./Makefile.std 2010-02-19 13:16:10.000000000 -0600 +@@ -61,7 +61,7 @@ + MANDIR = $(PREFIX)/share/man/man1 MANSUF = 1 - DOCDIR = $(PREFIX)/doc/xv-3.10a + DOCDIR = $(PREFIX)/share/doc/xv -LIBDIR = $(PREFIX)/lib/xv +LIBDIR = $(PREFIX)/lib64/xv - SYSCONFDIR = $(PREFIX)/etc + SYSCONFDIR = /etc DESTDIR = -@@ -200,7 +200,7 @@ +@@ -236,7 +236,7 @@ - ### for LINUX, uncomment the following line + ### for Linux, uncomment one of the following lines: -#MCHN = -DLINUX -L/usr/X11R6/lib +MCHN = -DLINUX -L/usr/X11R6/lib64 + #MCHN = -DLINUX -L/usr/X11R6/lib64 - # For SCO 1.1 (UNIX 3.2v2) machines, uncomment the following: diff --git a/source/y/bsd-games/bsd-games-login-fortune.sh b/source/y/bsd-games/bsd-games-login-fortune.sh index 598929fe4..cb0f05b0b 100644 --- a/source/y/bsd-games/bsd-games-login-fortune.sh +++ b/source/y/bsd-games/bsd-games-login-fortune.sh @@ -1,7 +1,11 @@ #!/bin/sh # Print a fortune cookie for interactive shells: -if [[ $- = *i* ]]; then + +case $- in +*i* ) # We're interactive echo fortune fortunes fortunes2 linuxcookie echo -fi + ;; +esac + diff --git a/source/y/bsd-games/bsd-games.SlackBuild b/source/y/bsd-games/bsd-games.SlackBuild index 976f5570b..4fb996719 100755 --- a/source/y/bsd-games/bsd-games.SlackBuild +++ b/source/y/bsd-games/bsd-games.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,17 @@ VERSION=${VERSION:-2.13} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-9} +BUILD=${BUILD:-11} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -45,6 +54,7 @@ zcat $CWD/bsd-games.fortlen.diff.gz | patch -p1 --backup --suffix=.orig || exit zcat $CWD/bsd-games.strfile.8.diff.gz | patch -p1 --backup --suffix=.orig || exit 1 zcat $CWD/bsd-games.trek-gcc4.diff.gz | patch -p1 --backup --suffix=.orig || exit 1 zcat $CWD/bsd-games.phantasia_install_fix.diff.gz | patch -p1 --backup --suffix=.orig || exit 1 +zcat $CWD/bsd-games.getline.diff.gz | patch -p1 --backup --suffix=.orig || exit 1 ## Without the old default (with, of course, a command line switch), and an updated ## man page, even though PJV wrote this, it just doesn't make the cut. I hope it's diff --git a/source/y/bsd-games/bsd-games.getline.diff b/source/y/bsd-games/bsd-games.getline.diff new file mode 100644 index 000000000..ed0cd9ca0 --- /dev/null +++ b/source/y/bsd-games/bsd-games.getline.diff @@ -0,0 +1,251 @@ +--- ./gomoku/main.c.orig 2000-05-28 09:51:46.000000000 -0500 ++++ ./gomoku/main.c 2010-05-11 16:10:10.000000000 -0500 +@@ -159,7 +159,7 @@ + if (inputfp == NULL && test == 0) { + for (;;) { + ask("black or white? "); +- getline(buf, sizeof(buf)); ++ g_getline(buf, sizeof(buf)); + if (buf[0] == 'b' || buf[0] == 'B') { + color = BLACK; + break; +@@ -176,7 +176,7 @@ + } + } else { + setbuf(stdout, 0); +- getline(buf, sizeof(buf)); ++ g_getline(buf, sizeof(buf)); + if (strcmp(buf, "black") == 0) + color = BLACK; + else if (strcmp(buf, "white") == 0) +@@ -248,7 +248,7 @@ + getinput: + if (interactive) + ask("move? "); +- if (!getline(buf, sizeof(buf))) { ++ if (!g_getline(buf, sizeof(buf))) { + curmove = RESIGN; + break; + } +@@ -260,7 +260,7 @@ + FILE *fp; + + ask("save file name? "); +- (void)getline(buf, sizeof(buf)); ++ (void)g_getline(buf, sizeof(buf)); + if ((fp = fopen(buf, "w")) == NULL) { + glog("cannot create save file"); + goto getinput; +@@ -313,14 +313,14 @@ + if (i != RESIGN) { + replay: + ask("replay? "); +- if (getline(buf, sizeof(buf)) && ++ if (g_getline(buf, sizeof(buf)) && + (buf[0] == 'y' || buf[0] == 'Y')) + goto again; + if (strcmp(buf, "save") == 0) { + FILE *fp; + + ask("save file name? "); +- (void)getline(buf, sizeof(buf)); ++ (void)g_getline(buf, sizeof(buf)); + if ((fp = fopen(buf, "w")) == NULL) { + glog("cannot create save file"); + goto replay; +@@ -371,7 +371,7 @@ + quit(); + top: + ask("cmd? "); +- if (!getline(fmtbuf, sizeof(fmtbuf))) ++ if (!g_getline(fmtbuf, sizeof(fmtbuf))) + quit(); + switch (*fmtbuf) { + case '\0': +--- ./gomoku/gomoku.h.orig 1999-09-15 05:34:31.000000000 -0500 ++++ ./gomoku/gomoku.h 2010-05-11 16:10:10.000000000 -0500 +@@ -269,7 +269,7 @@ + + void bdinit __P((struct spotstr *)); + void init_overlap __P((void)); +-int getline __P((char *, int)); ++int g_getline __P((char *, int)); + void ask __P((const char *)); + void dislog __P((const char *)); + void bdump __P((FILE *)); +--- ./gomoku/bdisp.c.orig 2001-02-07 18:18:22.000000000 -0600 ++++ ./gomoku/bdisp.c 2010-05-11 16:10:10.000000000 -0500 +@@ -245,7 +245,7 @@ + } + + int +-getline(buf, size) ++g_getline(buf, size) + char *buf; + int size; + { +--- ./cribbage/score.c.orig 1999-09-15 05:34:31.000000000 -0500 ++++ ./cribbage/score.c 2010-05-11 16:10:10.000000000 -0500 +@@ -122,7 +122,7 @@ + CARD h[(CINHAND + 1)]; + char buf[32]; + +- expl[0] = '\0'; /* initialize explanation */ ++ cr_expl[0] = '\0'; /* initialize explanation */ + score = 0; + flag = TRUE; + k = hand[0].suit; +@@ -132,29 +132,29 @@ + if (hand[i].suit == starter.suit) { + score++; + if (do_explain) +- strcat(expl, "His Nobs"); ++ strcat(cr_expl, "His Nobs"); + } + h[i] = hand[i]; + } + + if (flag && n >= CINHAND) { +- if (do_explain && expl[0] != '\0') +- strcat(expl, ", "); ++ if (do_explain && cr_expl[0] != '\0') ++ strcat(cr_expl, ", "); + if (starter.suit == k) { + score += 5; + if (do_explain) +- strcat(expl, "Five-flush"); ++ strcat(cr_expl, "Five-flush"); + } else + if (!crb) { + score += 4; +- if (do_explain && expl[0] != '\0') +- strcat(expl, ", Four-flush"); ++ if (do_explain && cr_expl[0] != '\0') ++ strcat(cr_expl, ", Four-flush"); + else +- strcpy(expl, "Four-flush"); ++ strcpy(cr_expl, "Four-flush"); + } + } +- if (do_explain && expl[0] != '\0') +- strcat(expl, ", "); ++ if (do_explain && cr_expl[0] != '\0') ++ strcat(cr_expl, ", "); + h[n] = starter; + sorthand(h, n + 1); /* sort by rank */ + i = 2 * fifteens(h, n + 1); +@@ -162,9 +162,9 @@ + if (do_explain) { + if (i > 0) { + (void) sprintf(buf, "%d points in fifteens", i); +- strcat(expl, buf); ++ strcat(cr_expl, buf); + } else +- strcat(expl, "No fifteens"); ++ strcat(cr_expl, "No fifteens"); + } + i = pairuns(h, n + 1); + score += i; +@@ -172,9 +172,9 @@ + if (i > 0) { + (void) sprintf(buf, ", %d points in pairs, %d in runs", + pairpoints, runpoints); +- strcat(expl, buf); ++ strcat(cr_expl, buf); + } else +- strcat(expl, ", No pairs/runs"); ++ strcat(cr_expl, ", No pairs/runs"); + } + return (score); + } +--- ./cribbage/support.c.orig 1999-09-15 05:34:31.000000000 -0500 ++++ ./cribbage/support.c 2010-05-11 16:10:10.000000000 -0500 +@@ -152,7 +152,7 @@ + msg("You should have taken %d, not %d!", i, j); + } + if (explain) +- msg("Explanation: %s", expl); ++ msg("Explanation: %s", cr_expl); + do_wait(); + } else + win = chkscr(&pscore, i); +--- ./cribbage/cribbage.h.orig 2000-10-17 14:58:05.000000000 -0500 ++++ ./cribbage/cribbage.h 2010-05-11 16:10:10.000000000 -0500 +@@ -59,7 +59,7 @@ + extern BOOLEAN quiet; /* if suppress random mess */ + extern BOOLEAN playing; /* currently playing game */ + +-extern char expl[]; /* string for explanation */ ++extern char cr_expl[]; /* string for explanation */ + + void addmsg __P((const char *, ...)) + __attribute__((__format__(__printf__, 1, 2))); +@@ -81,7 +81,7 @@ + int fifteens __P((const CARD [], int)); + void game __P((void)); + void gamescore __P((void)); +-char *getline __P((void)); ++char *cr_getline __P((void)); + int getuchar __P((void)); + int incard __P((CARD *)); + int infrom __P((const CARD [], int, const char *)); +--- ./cribbage/io.c.orig 1999-10-01 15:45:34.000000000 -0500 ++++ ./cribbage/io.c 2010-05-11 16:10:10.000000000 -0500 +@@ -254,7 +254,7 @@ + + retval = FALSE; + rnk = sut = EMPTY; +- if (!(line = getline())) ++ if (!(line = cr_getline())) + goto gotit; + p = p1 = line; + while (*p1 != ' ' && *p1 != '\0') +@@ -355,7 +355,7 @@ + + for (sum = 0;;) { + msg(prompt); +- if (!(p = getline()) || *p == '\0') { ++ if (!(p = cr_getline()) || *p == '\0') { + msg(quiet ? "Not a number" : + "That doesn't look like a number"); + continue; +@@ -562,7 +562,7 @@ + * compressed to one space; a space is inserted before a ',' + */ + char * +-getline() ++cr_getline() + { + char *sp; + int c, oy, ox; +--- ./cribbage/crib.c.orig 2001-02-07 18:18:22.000000000 -0600 ++++ ./cribbage/crib.c 2010-05-11 16:10:10.000000000 -0500 +@@ -225,7 +225,7 @@ + if (!rflag) { /* player cuts deck */ + msg(quiet ? "Cut for crib? " : + "Cut to see whose crib it is -- low card wins? "); +- getline(); ++ cr_getline(); + } + i = (rand() >> 4) % CARDS; /* random cut */ + do { /* comp cuts deck */ +@@ -401,7 +401,7 @@ + if (!rflag) { /* random cut */ + msg(quiet ? "Cut the deck? " : + "How many cards down do you wish to cut the deck? "); +- getline(); ++ cr_getline(); + } + i = (rand() >> 4) % (CARDS - pos); + turnover = deck[i + pos]; +--- ./cribbage/extern.c.orig 1999-09-26 06:37:19.000000000 -0500 ++++ ./cribbage/extern.c 2010-05-11 16:10:10.000000000 -0500 +@@ -52,7 +52,7 @@ + BOOLEAN quiet = FALSE; /* if suppress random mess */ + BOOLEAN rflag = FALSE; /* if all cuts random */ + +-char expl[128]; /* explanation */ ++char cr_expl[128]; /* explanation */ + + int cgames = 0; /* number games comp won */ + int cscore = 0; /* comp score in this game */ diff --git a/testing/packages/linux-2.6.30.5/README_FIRST.TXT b/testing/packages/linux-2.6.30.5/README_FIRST.TXT deleted file mode 100644 index 86fa47b50..000000000 --- a/testing/packages/linux-2.6.30.5/README_FIRST.TXT +++ /dev/null @@ -1,93 +0,0 @@ - -Here are a set of 2.6.30.5 Linux kernel packages available for testing -with Slackware 13.0. These are not supported kernels, and we would -recommend that most users stick with the 2.6.29.6 kernels unless they -have a reason to use the newer kernel. A possible reason might be if -a system has some hardware that is better supported by the latest -kernel, such as certain recent wifi and video drivers. - -That said, we hope these kernel packages are helpful. - -To use these packages, install them with installpkg: - -installpkg kernel-*.txz - -Then, use mkinitrd to make an initial ramdisk. Use appropriate settings -for the kernel, filesystem module and type, and root device. Here's an -example for the i686 generic kernel using ext4 on root device /dev/sda2: - -mkinitrd -k 2.6.30.5-smp -m ext4 -f ext4 -r /dev/sda2 - -Here's an example using the x86_64 generic kernel and ext4 on /dev/sda2: - -mkinitrd -k 2.6.30.5 -m ext4 -f ext4 -r /dev/sda2 - -Now, you'll need to edit your /etc/lilo.conf. - -************** -* IMPORTANT! * -************** - -Due to the size of the 2.6.30.5 kernel and initrd, many BIOSes cannot boot -the kernel/ramdisk combination for i686, and most (if not all) will have -problems with the x86_64 kernel/ramdisk unless this option is added to the -/etc/lilo.conf: - -large-memory - -This allows LILO to use more than the first 15MB of RAM. LILO does not use -this option by default since it doesn't work with some older systems (BIOSes -from before around 2001). LILO tries to detect the amount of space that will -be required to decompress the kernel, but some adjustment to the code is -going to be needed, or perhaps we will have to investigate alternatives for -the bootloader. In any case, that's something for Slackware 13.1 or 14.0, or -whatever happens down the line. - -The option can go into the lilo.conf global section. It actually works just -fine to make it the first uncommented line of the file. - -************** - -Editing the /etc/lilo.conf file: - -With the large-memory option added to the file as described above, the next -step is to add a section to boot the new kernel and initrd. It's probably -a good idea to leave the section that boots the existing kernel in place at -first. - -An example for the 2.6.30.5-smp i686 kernel might look like this, added to -the bottom of /etc/lilo.conf: - -# Linux bootable partition config begins -image = /boot/vmlinuz-generic-smp-2.6.30.5-smp - initrd = /boot/initrd.gz - root = /dev/sda2 - label = L26305 - read-only -# Linux bootable partition config ends - -This uses the same configuration as the mkinitrd example for i686 above -- -adjust it to suit your needs. - -Once you've edited /etc/lilo.conf to add a boot section for the new kernel -and the large-memory option, you're ready to reinstall LILO. As root, -issue the "lilo" command. You should see output similar to this: - -# lilo -Warning: LBA32 addressing assumed -Added Linux * -Added Windows -Added L26305 -One warning was issued. - -If you get an error (not just a warning), you'll need to figure out how to -correct that and install LILO again BEFORE you try to reboot the machine! -Otherwise the machine may not reboot, and you'll need to use bootable media -to rescue it. - -Once LILO is installed without errors (warnings are probably OK), you may -reboot the machine and select the menu option for the new kernel. If all -goes well, your machine will start up running the 2.6.30.5 kernel. - -Hope this helps, and have fun. :-) - diff --git a/testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txt deleted file mode 100644 index 8a2d40cc1..000000000 --- a/testing/packages/linux-2.6.30.5/kernel-firmware-2.6.30.5-noarch-1_testing.txt +++ /dev/null @@ -1,11 +0,0 @@ -kernel-firmware: kernel-firmware (Firmware installed by the kernel) -kernel-firmware: -kernel-firmware: These are the firmware files from the Linux kernel. -kernel-firmware: -kernel-firmware: You'll need these to use certain hardware with Linux. -kernel-firmware: -kernel-firmware: -kernel-firmware: -kernel-firmware: -kernel-firmware: -kernel-firmware: diff --git a/testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txt deleted file mode 100644 index b99e55093..000000000 --- a/testing/packages/linux-2.6.30.5/kernel-generic-2.6.30.5-x86_64-1_testing.txt +++ /dev/null @@ -1,11 +0,0 @@ -kernel-generic: kernel-generic (a general purpose SMP Linux kernel) -kernel-generic: -kernel-generic: This is a Linux kernel with built-in support for most disk -kernel-generic: controllers. To use filesystems, or to load support for a SCSI or -kernel-generic: other controller, then you'll need to load one or more kernel -kernel-generic: modules using an initial ramdisk, or initrd. For more information -kernel-generic: about creating an initrd, see the README.initrd file in the /boot -kernel-generic: directory. -kernel-generic: -kernel-generic: SMP is "Symmetric multiprocessing", or multiple CPU/core support. -kernel-generic: diff --git a/testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txt deleted file mode 100644 index 27b46a0e6..000000000 --- a/testing/packages/linux-2.6.30.5/kernel-headers-2.6.30.5-x86-1_testing.txt +++ /dev/null @@ -1,11 +0,0 @@ -kernel-headers: kernel-headers (Linux kernel include files) -kernel-headers: -kernel-headers: These are the include files from the Linux kernel. -kernel-headers: -kernel-headers: You'll need these to compile most system software for Linux. -kernel-headers: -kernel-headers: -kernel-headers: -kernel-headers: -kernel-headers: -kernel-headers: diff --git a/testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txt deleted file mode 100644 index 56067d436..000000000 --- a/testing/packages/linux-2.6.30.5/kernel-modules-2.6.30.5-x86_64-1_testing.txt +++ /dev/null @@ -1,11 +0,0 @@ -kernel-modules: kernel-modules (Linux kernel modules) -kernel-modules: -kernel-modules: A kernel module is a piece of object code that can be dynamically -kernel-modules: loaded into the Linux kernel to provide new kernel functions. Most of -kernel-modules: these modules provide support for devices such as CD-ROM drives, tape -kernel-modules: drives, and ethernet cards. You can choose which modules to load by -kernel-modules: editing /etc/rc.d/rc.modules. -kernel-modules: -kernel-modules: -kernel-modules: -kernel-modules: diff --git a/testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txt b/testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txt deleted file mode 100644 index eb2b0a30c..000000000 --- a/testing/packages/linux-2.6.30.5/kernel-source-2.6.30.5-noarch-1_testing.txt +++ /dev/null @@ -1,11 +0,0 @@ -kernel-source: kernel-source (Linux kernel source) -kernel-source: -kernel-source: Source code for Linus Torvalds' Linux kernel. -kernel-source: -kernel-source: This is the complete and unmodified source code for the Linux kernel. -kernel-source: -kernel-source: -kernel-source: -kernel-source: -kernel-source: -kernel-source: diff --git a/testing/source/bash/bash-4.0-patches/bash40-001 b/testing/source/bash/bash-4.0-patches/bash40-001 deleted file mode 100644 index 5c6bb34b2..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-001 +++ /dev/null @@ -1,162 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-001 - -Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> -Bug-Reference-ID: <200902211821.42188.vapier@gentoo.org> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00147.html - -Bug-Description: - -Bash has problems parsing certain constructs inside Posix-style $(...) -command substitutions, mostly with backslash-quoting and reserved word -recognition. This is an issue because the contents are parsed at the -time the word containing the command substitution is read. - -Patch: - -*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 ---- parse.y 2009-03-06 20:32:35.000000000 -0500 -*************** -*** 2928,2931 **** ---- 2932,2936 ---- - #define LEX_HEREDELIM 0x100 /* reading here-doc delimiter */ - #define LEX_STRIPDOC 0x200 /* <<- strip tabs from here doc delim */ -+ #define LEX_INWORD 0x400 - - #define COMSUB_META(ch) ((ch) == ';' || (ch) == '&' || (ch) == '|') -*************** -*** 3180,3184 **** - int *lenp, flags; - { -! int count, ch, peekc, tflags, lex_rwlen, lex_firstind; - int nestlen, ttranslen, start_lineno; - char *ret, *nestret, *ttrans, *heredelim; ---- 3188,3192 ---- - int *lenp, flags; - { -! int count, ch, peekc, tflags, lex_rwlen, lex_wlen, lex_firstind; - int nestlen, ttranslen, start_lineno; - char *ret, *nestret, *ttrans, *heredelim; -*************** -*** 3201,3205 **** - - start_lineno = line_number; -! lex_rwlen = 0; - - heredelim = 0; ---- 3209,3213 ---- - - start_lineno = line_number; -! lex_rwlen = lex_wlen = 0; - - heredelim = 0; -*************** -*** 3268,3271 **** ---- 3276,3319 ---- - } - -+ if (tflags & LEX_PASSNEXT) /* last char was backslash */ -+ { -+ /*itrace("parse_comsub:%d: lex_passnext -> 0 ch = `%c' (%d)", line_number, ch, __LINE__);*/ -+ tflags &= ~LEX_PASSNEXT; -+ if (qc != '\'' && ch == '\n') /* double-quoted \<newline> disappears. */ -+ { -+ if (retind > 0) -+ retind--; /* swallow previously-added backslash */ -+ continue; -+ } -+ -+ RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64); -+ if MBTEST(ch == CTLESC || ch == CTLNUL) -+ ret[retind++] = CTLESC; -+ ret[retind++] = ch; -+ continue; -+ } -+ -+ /* If this is a shell break character, we are not in a word. If not, -+ we either start or continue a word. */ -+ if MBTEST(shellbreak (ch)) -+ { -+ tflags &= ~LEX_INWORD; -+ /*itrace("parse_comsub:%d: lex_inword -> 0 ch = `%c' (%d)", line_number, ch, __LINE__);*/ -+ } -+ else -+ { -+ if (tflags & LEX_INWORD) -+ { -+ lex_wlen++; -+ /*itrace("parse_comsub:%d: lex_inword == 1 ch = `%c' lex_wlen = %d (%d)", line_number, ch, lex_wlen, __LINE__);*/ -+ } -+ else -+ { -+ /*itrace("parse_comsub:%d: lex_inword -> 1 ch = `%c' (%d)", line_number, ch, __LINE__);*/ -+ tflags |= LEX_INWORD; -+ lex_wlen = 0; -+ } -+ } -+ - /* Skip whitespace */ - if MBTEST(shellblank (ch) && lex_rwlen == 0) -*************** -*** 3400,3428 **** - } - else -! ch = peekc; /* fall through and continue XXX - this skips comments if peekc == '#' */ - } -! /* Not exactly right yet, should handle shell metacharacters, too. If -! any changes are made to this test, make analogous changes to subst.c: -! extract_delimited_string(). */ -! else if MBTEST((tflags & LEX_CKCOMMENT) && (tflags & LEX_INCOMMENT) == 0 && ch == '#' && (retind == 0 || ret[retind-1] == '\n' || shellblank (ret[retind - 1]))) - tflags |= LEX_INCOMMENT; - -! if (tflags & LEX_PASSNEXT) /* last char was backslash */ -! { -! tflags &= ~LEX_PASSNEXT; -! if (qc != '\'' && ch == '\n') /* double-quoted \<newline> disappears. */ -! { -! if (retind > 0) -! retind--; /* swallow previously-added backslash */ -! continue; -! } -! -! RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64); -! if MBTEST(ch == CTLESC || ch == CTLNUL) -! ret[retind++] = CTLESC; -! ret[retind++] = ch; -! continue; -! } -! else if MBTEST(ch == CTLESC || ch == CTLNUL) /* special shell escapes */ - { - RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64); ---- 3442,3454 ---- - } - else -! ch = peekc; /* fall through and continue XXX */ - } -! else if MBTEST((tflags & LEX_CKCOMMENT) && (tflags & LEX_INCOMMENT) == 0 && ch == '#' && (((tflags & LEX_RESWDOK) && lex_rwlen == 0) || ((tflags & LEX_INWORD) && lex_wlen == 0))) -! { -! /*itrace("parse_comsub:%d: lex_incomment -> 1 (%d)", line_number, __LINE__);*/ - tflags |= LEX_INCOMMENT; -+ } - -! if MBTEST(ch == CTLESC || ch == CTLNUL) /* special shell escapes */ - { - RESIZE_MALLOCED_BUFFER (ret, retind, 2, retsize, 64); -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 0 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 1 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-002 b/testing/source/bash/bash-4.0-patches/bash40-002 deleted file mode 100644 index 18bd25e7b..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-002 +++ /dev/null @@ -1,43 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-002 - -Bug-Reported-by: phil@Arcturus.universe -Bug-Reference-ID: <20090221143709.13878.qmail@Arcturus.universe> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00142.html - -Bug-Description: - -A line inadvertenly omitted from a submitted patch results in core dumps -when attempting filename completion while using the bash-completion -package. - -Patch: - -*** ../bash-4.0/pcomplete.c 2009-02-01 17:12:31.000000000 -0500 ---- pcomplete.c 2009-02-22 17:08:25.000000000 -0500 -*************** -*** 1033,1036 **** ---- 1033,1037 ---- - - pps = &ps; -+ save_parser_state (pps); - begin_unwind_frame ("gen-shell-function-matches"); - add_unwind_protect (restore_parser_state, (char *)pps); -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 1 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 2 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-003 b/testing/source/bash/bash-4.0-patches/bash40-003 deleted file mode 100644 index cc941d5e9..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-003 +++ /dev/null @@ -1,70 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-003 - -Bug-Reported-by: Bernd Eggink <monoped@sudrala.de> -Bug-Reference-ID: <49A323F5.60503@sudrala.de> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00177.html - -Bug-Description: - -Under certain circumstances, constructs containing command substitutions -prevent PS1 from being re-evaluated and updated before being displayed. - -Patch: - -*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 ---- parse.y 2009-02-25 15:58:25.000000000 -0500 -*************** -*** 1616,1623 **** - int *ret; - -! ret = (int *)xmalloc (3 * sizeof (int)); - ret[0] = last_read_token; - ret[1] = token_before_that; - ret[2] = two_tokens_ago; - return ret; - } ---- 1616,1624 ---- - int *ret; - -! ret = (int *)xmalloc (4 * sizeof (int)); - ret[0] = last_read_token; - ret[1] = token_before_that; - ret[2] = two_tokens_ago; -+ ret[3] = current_token; - return ret; - } -*************** -*** 1632,1635 **** ---- 1633,1637 ---- - token_before_that = ts[1]; - two_tokens_ago = ts[2]; -+ current_token = ts[3]; - } - -*************** -*** 2669,2672 **** ---- 2671,2675 ---- - word_desc_to_read = (WORD_DESC *)NULL; - -+ current_token = '\n'; /* XXX */ - last_read_token = '\n'; - token_to_read = '\n'; -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 2 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 3 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-004 b/testing/source/bash/bash-4.0-patches/bash40-004 deleted file mode 100644 index 6ab6c4ee6..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-004 +++ /dev/null @@ -1,47 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-004 - -Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> -Bug-Reference-ID: <200902231720.30519.vapier@gentoo.org> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00176.html - -Bug-Description: - -In some cases, enabling the `checkjobs' shell option will cause the shell -to core dump when executing the `exit' builtin. - -Patch: - -*** ../bash-4.0/builtins/exit.def 2009-01-04 14:32:22.000000000 -0500 ---- builtins/exit.def 2009-02-23 22:56:58.000000000 -0500 -*************** -*** 114,118 **** - if (jobs[i] && STOPPED (i)) - stopmsg = JSTOPPED; -! else if (check_jobs_at_exit && stopmsg == 0 && RUNNING (i)) - stopmsg = JRUNNING; - ---- 114,118 ---- - if (jobs[i] && STOPPED (i)) - stopmsg = JSTOPPED; -! else if (check_jobs_at_exit && stopmsg == 0 && jobs[i] && RUNNING (i)) - stopmsg = JRUNNING; - -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 3 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 4 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-005 b/testing/source/bash/bash-4.0-patches/bash40-005 deleted file mode 100644 index ccfde66da..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-005 +++ /dev/null @@ -1,63 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-005 - -Bug-Reported-by: Pierre Gaston <pierre.gaston@gmail.com> -Bug-Reference-ID: <c440c9800902242338n69f594a4nd66b8748def9cf18@mail.gmail.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00206.html - -Bug-Description: - -The `declare' builtin dumped core when attempting to assign associative -array indices containing some special characters, even when they were -quoted before being expanded. - -Patch: - -*** ../bash-4.0/builtins/declare.def 2009-01-04 14:32:22.000000000 -0500 ---- builtins/declare.def 2009-02-26 11:40:16.000000000 -0500 -*************** -*** 296,299 **** ---- 296,306 ---- - if (t = strchr (name, '[')) /* ] */ - { -+ /* If offset != 0 we have already validated any array reference */ -+ if (offset == 0 && valid_array_reference (name) == 0) -+ { -+ sh_invalidid (name); -+ assign_error++; -+ NEXT_VARIABLE (); -+ } - subscript_start = t; - *t = '\0'; -*************** -*** 485,489 **** - /* declare -a name[[n]] or declare name[n] makes name an indexed - array variable. */ -! else if ((making_array_special || (flags_on & att_array)) && array_p (var) == 0) - var = convert_var_to_array (var); - #endif /* ARRAY_VARS */ ---- 492,496 ---- - /* declare -a name[[n]] or declare name[n] makes name an indexed - array variable. */ -! else if ((making_array_special || (flags_on & att_array)) && array_p (var) == 0 && assoc_p (var) == 0) - var = convert_var_to_array (var); - #endif /* ARRAY_VARS */ -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 4 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 5 - - #endif /* _PATCHLEVEL_H_ */ - diff --git a/testing/source/bash/bash-4.0-patches/bash40-006 b/testing/source/bash/bash-4.0-patches/bash40-006 deleted file mode 100644 index 3d044c72e..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-006 +++ /dev/null @@ -1,43 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-006 - -Bug-Reported-by: Evgeniy Zhemchugov <jini.zh@gmail.com> -Bug-Reference-ID: <e7bc8dd30902241016m8bd543ej775717d007df975b@mail.gmail.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00202.html - -Bug-Description: - -Bash did not parse pipelines using the |& construct correctly if the -pipeline elements were not simple commands. - -Patch: - -*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 ---- parse.y 2009-02-25 17:25:56.000000000 -0500 -*************** -*** 4478,4481 **** ---- 4478,4482 ---- - case AND_AND: - case BANG: -+ case BAR_AND: - case DO: - case DONE: -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 5 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 6 - - #endif /* _PATCHLEVEL_H_ */ - diff --git a/testing/source/bash/bash-4.0-patches/bash40-007 b/testing/source/bash/bash-4.0-patches/bash40-007 deleted file mode 100644 index 29071e129..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-007 +++ /dev/null @@ -1,263 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-007 - -Bug-Reported-by: AnMaster <anmaster@tele2.se> -Bug-Reference-ID: <49A41C18.80807@tele2.se> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00188.html - -Bug-Description: - -Bash had a number of problems parsing associative array subscripts containing -special characters. The subscripts are supposed to be read as if they are -enclosed between double quotes. - -Patch: - -*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 ---- parse.y 2009-02-25 17:25:56.000000000 -0500 -*************** -*** 2919,2922 **** ---- 2919,2923 ---- - #define P_COMMAND 0x08 /* parsing a command, so look for comments */ - #define P_BACKQUOTE 0x10 /* parsing a backquoted command substitution */ -+ #define P_ARRAYSUB 0x20 /* parsing a [...] array subscript for assignment */ - - /* Lexical state while parsing a grouping construct or $(...). */ -*************** -*** 3134,3137 **** ---- 3134,3139 ---- - FREE (nestret); - } -+ else if ((flags & P_ARRAYSUB) && (tflags & LEX_WASDOL) && (ch == '(' || ch == '{' || ch == '[')) /* ) } ] */ -+ goto parse_dollar_word; - } - /* Parse an old-style command substitution within double quotes as a -*************** -*** 3150,3153 **** ---- 3150,3154 ---- - /* check for $(), $[], or ${} inside quoted string. */ - { -+ parse_dollar_word: - if (open == ch) /* undo previous increment */ - count--; -*************** -*** 4277,4281 **** - (token_index == 0 && (parser_state&PST_COMPASSIGN)))) - { -! ttok = parse_matched_pair (cd, '[', ']', &ttoklen, 0); - if (ttok == &matched_pair_error) - return -1; /* Bail immediately. */ ---- 4277,4281 ---- - (token_index == 0 && (parser_state&PST_COMPASSIGN)))) - { -! ttok = parse_matched_pair (cd, '[', ']', &ttoklen, P_ARRAYSUB); - if (ttok == &matched_pair_error) - return -1; /* Bail immediately. */ -*** ../bash-4.0/arrayfunc.c 2009-01-04 14:32:21.000000000 -0500 ---- arrayfunc.c 2009-02-25 07:58:54.000000000 -0500 -*************** -*** 605,666 **** - } - -! /* This function assumes s[i] == '['; returns with s[ret] == ']' if -! an array subscript is correctly parsed. */ -! int -! skipsubscript (s, i) -! const char *s; -! int i; -! { -! int count, c; -! #if defined (HANDLE_MULTIBYTE) -! mbstate_t state, state_bak; -! size_t slength, mblength; -! #endif -! -! #if defined (HANDLE_MULTIBYTE) -! memset (&state, '\0', sizeof (mbstate_t)); -! slength = strlen (s + i); -! #endif -! -! count = 1; -! while (count) -! { -! /* Advance one (possibly multibyte) character in S starting at I. */ -! #if defined (HANDLE_MULTIBYTE) -! if (MB_CUR_MAX > 1) -! { -! state_bak = state; -! mblength = mbrlen (s + i, slength, &state); -! -! if (MB_INVALIDCH (mblength)) -! { -! state = state_bak; -! i++; -! slength--; -! } -! else if (MB_NULLWCH (mblength)) -! return i; -! else -! { -! i += mblength; -! slength -= mblength; -! } -! } -! else -! #endif -! ++i; -! -! c = s[i]; -! -! if (c == 0) -! break; -! else if (c == '[') -! count++; -! else if (c == ']') -! count--; -! } -! -! return i; -! } - - /* This function is called with SUB pointing to just after the beginning ---- 605,609 ---- - } - -! /* skipsubscript moved to subst.c to use private functions. 2009/02/24. */ - - /* This function is called with SUB pointing to just after the beginning -*** ../bash-4.0/subst.c 2009-01-28 14:34:12.000000000 -0500 ---- subst.c 2009-02-25 09:18:33.000000000 -0500 -*************** -*** 223,226 **** ---- 223,227 ---- - static char *extract_delimited_string __P((char *, int *, char *, char *, char *, int)); - static char *extract_dollar_brace_string __P((char *, int *, int, int)); -+ static int skip_matched_pair __P((const char *, int, int, int, int)); - - static char *pos_params __P((char *, int, int, int)); -*************** -*** 1375,1378 **** ---- 1376,1480 ---- - #define CQ_RETURN(x) do { no_longjmp_on_fatal_error = 0; return (x); } while (0) - -+ /* This function assumes s[i] == open; returns with s[ret] == close; used to -+ parse array subscripts. FLAGS currently unused. */ -+ static int -+ skip_matched_pair (string, start, open, close, flags) -+ const char *string; -+ int start, open, close, flags; -+ { -+ int i, pass_next, backq, si, c, count; -+ size_t slen; -+ char *temp, *ss; -+ DECLARE_MBSTATE; -+ -+ slen = strlen (string + start) + start; -+ no_longjmp_on_fatal_error = 1; -+ -+ i = start + 1; /* skip over leading bracket */ -+ count = 1; -+ pass_next = backq = 0; -+ ss = (char *)string; -+ while (c = string[i]) -+ { -+ if (pass_next) -+ { -+ pass_next = 0; -+ if (c == 0) -+ CQ_RETURN(i); -+ ADVANCE_CHAR (string, slen, i); -+ continue; -+ } -+ else if (c == '\\') -+ { -+ pass_next = 1; -+ i++; -+ continue; -+ } -+ else if (backq) -+ { -+ if (c == '`') -+ backq = 0; -+ ADVANCE_CHAR (string, slen, i); -+ continue; -+ } -+ else if (c == '`') -+ { -+ backq = 1; -+ i++; -+ continue; -+ } -+ else if (c == open) -+ { -+ count++; -+ i++; -+ continue; -+ } -+ else if (c == close) -+ { -+ count--; -+ if (count == 0) -+ break; -+ i++; -+ continue; -+ } -+ else if (c == '\'' || c == '"') -+ { -+ i = (c == '\'') ? skip_single_quoted (ss, slen, ++i) -+ : skip_double_quoted (ss, slen, ++i); -+ /* no increment, the skip functions increment past the closing quote. */ -+ } -+ else if (c == '$' && (string[i+1] == LPAREN || string[i+1] == LBRACE)) -+ { -+ si = i + 2; -+ if (string[si] == '\0') -+ CQ_RETURN(si); -+ -+ if (string[i+1] == LPAREN) -+ temp = extract_delimited_string (ss, &si, "$(", "(", ")", SX_NOALLOC|SX_COMMAND); /* ) */ -+ else -+ temp = extract_dollar_brace_string (ss, &si, 0, SX_NOALLOC); -+ i = si; -+ if (string[i] == '\0') /* don't increment i past EOS in loop */ -+ break; -+ i++; -+ continue; -+ } -+ else -+ ADVANCE_CHAR (string, slen, i); -+ } -+ -+ CQ_RETURN(i); -+ } -+ -+ #if defined (ARRAY_VARS) -+ int -+ skipsubscript (string, start) -+ const char *string; -+ int start; -+ { -+ return (skip_matched_pair (string, start, '[', ']', 0)); -+ } -+ #endif -+ - /* Skip characters in STRING until we find a character in DELIMS, and return - the index of that character. START is the index into string at which we -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 6 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 7 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-008 b/testing/source/bash/bash-4.0-patches/bash40-008 deleted file mode 100644 index 7a2576aa6..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-008 +++ /dev/null @@ -1,49 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-008 - -Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> -Bug-Reference-ID: <200902261030.54062.vapier@gentoo.org> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00230.html - -Bug-Description: - -Patch: - -*** ../bash-4.0/parse.y 2009-01-08 08:29:12.000000000 -0500 ---- parse.y 2009-02-26 17:22:15.000000000 -0500 -*************** -*** 3443,3448 **** - else - shell_ungetc (peekc); -! tflags |= LEX_HEREDELIM; -! lex_firstind = -1; - continue; - } ---- 3443,3451 ---- - else - shell_ungetc (peekc); -! if (peekc != '<') -! { -! tflags |= LEX_HEREDELIM; -! lex_firstind = -1; -! } - continue; - } -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 7 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 8 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-009 b/testing/source/bash/bash-4.0-patches/bash40-009 deleted file mode 100644 index f58391929..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-009 +++ /dev/null @@ -1,61 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-009 - -Bug-Reported-by: "Chris F.A. Johnson" <cfajohnson@gmail.com> -Bug-Reference-ID: <4d6b7$49a88cec$cef88ba3$16813@TEKSAVVY.COM> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00255.html - -Bug-Description: - -When the read builtin returned due to a timeout supplied with the -t option, -it did not restore any modified terminal attribtues. - -Patch: - -*** ../bash-4.0/builtins/read.def 2009-01-15 23:11:21.000000000 -0500 ---- builtins/read.def 2009-03-02 10:15:39.000000000 -0500 -*************** -*** 370,381 **** - if (code) - { -! #if 0 - run_unwind_frame ("read_builtin"); -- return (EXECUTION_FAILURE); -- #else - input_string[i] = '\0'; /* make sure it's terminated */ -! retval = 128+SIGALRM;; - goto assign_vars; -- #endif - } - old_alrm = set_signal_handler (SIGALRM, sigalrm); ---- 370,381 ---- - if (code) - { -! /* Tricky. The top of the unwind-protect stack is the free of -! input_string. We want to run all the rest and use input_string, -! so we have to remove it from the stack. */ -! remove_unwind_protect (); - run_unwind_frame ("read_builtin"); - input_string[i] = '\0'; /* make sure it's terminated */ -! retval = 128+SIGALRM; - goto assign_vars; - } - old_alrm = set_signal_handler (SIGALRM, sigalrm); -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 8 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 9 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-010 b/testing/source/bash/bash-4.0-patches/bash40-010 deleted file mode 100644 index 3229c5736..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-010 +++ /dev/null @@ -1,63 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-010 - -Bug-Reported-by: Mike Frysinger <vapier@gentoo.org> -Bug-Reference-ID: <200903030122.56206.vapier@gentoo.org> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00023.html - -Bug-Description: - -Bash has problems parsing comments in case statements when they appear in -$(...) subshells. - -Patch: - -*** ../bash-4.0/parse.y 2009-03-07 15:18:35.000000000 -0500 ---- parse.y 2009-03-07 14:16:32.000000000 -0500 -*************** -*** 3413,3419 **** - tflags &= ~LEX_RESWDOK; - } -! else if (shellbreak (ch) == 0) - { -! tflags &= ~LEX_RESWDOK; - /*itrace("parse_comsub:%d: found `%c', lex_reswordok -> 0", line_number, ch);*/ - } ---- 3415,3433 ---- - tflags &= ~LEX_RESWDOK; - } -! else if MBTEST((tflags & LEX_CKCOMMENT) && ch == '#' && (lex_rwlen == 0 || ((tflags & LEX_INWORD) && lex_wlen == 0))) -! ; /* don't modify LEX_RESWDOK if we're starting a comment */ -! else if MBTEST((tflags & LEX_INCASE) && ch != '\n') -! /* If we can read a reserved word and we're in case, we're at the -! point where we can read a new pattern list or an esac. We -! handle the esac case above. If we read a newline, we want to -! leave LEX_RESWDOK alone. If we read anything else, we want to -! turn off LEX_RESWDOK, since we're going to read a pattern list. */ - { -! tflags &= ~LEX_RESWDOK; -! /*itrace("parse_comsub:%d: lex_incase == 1 found `%c', lex_reswordok -> 0", line_number, ch);*/ -! } -! else if MBTEST(shellbreak (ch) == 0) -! { -! tflags &= ~LEX_RESWDOK; - /*itrace("parse_comsub:%d: found `%c', lex_reswordok -> 0", line_number, ch);*/ - } -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 9 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 10 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-011 b/testing/source/bash/bash-4.0-patches/bash40-011 deleted file mode 100644 index 61d1d3a8a..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-011 +++ /dev/null @@ -1,49 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-011 - -Bug-Reported-by: Matt Zyzik <Matt@ice.filescope.com>n -Bug-Reference-ID: <20090312015018.C00741383ED@ice.filescope.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00092.html - -Bug-Description: - -When using the new |& operator following a simple command with a redirection, -the redirection of stderr through the pipe was not performed under certain -circumstances. - -Patch: - -*** ../bash-4.0-patched/parse.y 2009-03-08 21:24:47.000000000 -0400 ---- parse.y 2009-03-12 21:36:23.000000000 -0400 -*************** -*** 1123,1127 **** - REDIRECT *r; - -! tc = $1; - rd.dest = 1; - r = make_redirection (2, r_duplicating_output, rd); ---- 1123,1127 ---- - REDIRECT *r; - -! tc = $1->type == cm_simple ? (COMMAND *)$1->value.Simple : $1; - rd.dest = 1; - r = make_redirection (2, r_duplicating_output, rd); -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 10 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 11 - - #endif /* _PATCHLEVEL_H_ */ - diff --git a/testing/source/bash/bash-4.0-patches/bash40-012 b/testing/source/bash/bash-4.0-patches/bash40-012 deleted file mode 100644 index 014eae69a..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-012 +++ /dev/null @@ -1,47 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-012 - -Bug-Reported-by: "Clark J. Wang" <dearvoid@gmail.com> -Bug-Reference-ID: <a96f63770903132300v7816dfb7hb7f48d46048bf3cb@mail.gmail.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00129.html - -Bug-Description: - -A case statement using the ;& pattern terminator followed immediately by -"esac" caused a core dump due to a null pointer dereference. - -Patch: - -*** ../bash-4.0-patched/execute_cmd.c 2009-02-13 16:41:41.000000000 -0500 ---- execute_cmd.c 2009-03-14 13:23:00.000000000 -0400 -*************** -*** 2931,2935 **** - } - while ((clauses->flags & CASEPAT_FALLTHROUGH) && (clauses = clauses->next)); -! if ((clauses->flags & CASEPAT_TESTNEXT) == 0) - EXIT_CASE (); - else ---- 2931,2935 ---- - } - while ((clauses->flags & CASEPAT_FALLTHROUGH) && (clauses = clauses->next)); -! if (clauses == 0 || (clauses->flags & CASEPAT_TESTNEXT) == 0) - EXIT_CASE (); - else -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 11 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 12 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-013 b/testing/source/bash/bash-4.0-patches/bash40-013 deleted file mode 100644 index df1fc493b..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-013 +++ /dev/null @@ -1,153 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-013 - -Bug-Reported-by: jidanni@jidanni.org -Bug-Reference-ID: -Bug-Reference-URL: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=519165 - -Bug-Description: - -Though references to $@ when there are no positional parameters will now -cause the shell to exit if the `errexit' option has been enabled, constructs -such as ${@:-foo} should not cause an exit. - -Patch: - -*** ../bash-4.0-patched/subst.c 2009-03-08 21:24:39.000000000 -0400 ---- subst.c 2009-03-14 19:04:10.000000000 -0400 -*************** -*** 86,89 **** ---- 86,90 ---- - /* Flags for the `pflags' argument to param_expand() */ - #define PF_NOCOMSUB 0x01 /* Do not perform command substitution */ -+ #define PF_IGNUNBOUND 0x02 /* ignore unbound vars even if -u set */ - - /* These defs make it easier to use the editor. */ -*************** -*** 264,268 **** - static int chk_arithsub __P((const char *, int)); - -! static WORD_DESC *parameter_brace_expand_word __P((char *, int, int)); - static WORD_DESC *parameter_brace_expand_indir __P((char *, int, int, int *, int *)); - static WORD_DESC *parameter_brace_expand_rhs __P((char *, char *, int, int, int *, int *)); ---- 265,269 ---- - static int chk_arithsub __P((const char *, int)); - -! static WORD_DESC *parameter_brace_expand_word __P((char *, int, int, int)); - static WORD_DESC *parameter_brace_expand_indir __P((char *, int, int, int *, int *)); - static WORD_DESC *parameter_brace_expand_rhs __P((char *, char *, int, int, int *, int *)); -*************** -*** 5196,5202 **** - NAME was found inside of a double-quoted expression. */ - static WORD_DESC * -! parameter_brace_expand_word (name, var_is_special, quoted) - char *name; -! int var_is_special, quoted; - { - WORD_DESC *ret; ---- 5197,5203 ---- - NAME was found inside of a double-quoted expression. */ - static WORD_DESC * -! parameter_brace_expand_word (name, var_is_special, quoted, pflags) - char *name; -! int var_is_special, quoted, pflags; - { - WORD_DESC *ret; -*************** -*** 5230,5234 **** - - ret = param_expand (tt, &sindex, quoted, (int *)NULL, (int *)NULL, -! (int *)NULL, (int *)NULL, 0); - free (tt); - } ---- 5231,5235 ---- - - ret = param_expand (tt, &sindex, quoted, (int *)NULL, (int *)NULL, -! (int *)NULL, (int *)NULL, pflags); - free (tt); - } -*************** -*** 5291,5295 **** - WORD_DESC *w; - -! w = parameter_brace_expand_word (name, var_is_special, quoted); - t = w->word; - /* Have to dequote here if necessary */ ---- 5292,5296 ---- - WORD_DESC *w; - -! w = parameter_brace_expand_word (name, var_is_special, quoted, PF_IGNUNBOUND); - t = w->word; - /* Have to dequote here if necessary */ -*************** -*** 5308,5312 **** - return (WORD_DESC *)NULL; - -! w = parameter_brace_expand_word (t, SPECIAL_VAR(t, 0), quoted); - free (t); - ---- 5309,5313 ---- - return (WORD_DESC *)NULL; - -! w = parameter_brace_expand_word (t, SPECIAL_VAR(t, 0), quoted, 0); - free (t); - -*************** -*** 6659,6663 **** - tdesc = parameter_brace_expand_indir (name + 1, var_is_special, quoted, quoted_dollar_atp, contains_dollar_at); - else -! tdesc = parameter_brace_expand_word (name, var_is_special, quoted); - - if (tdesc) ---- 6660,6664 ---- - tdesc = parameter_brace_expand_indir (name + 1, var_is_special, quoted, quoted_dollar_atp, contains_dollar_at); - else -! tdesc = parameter_brace_expand_word (name, var_is_special, quoted, PF_IGNUNBOUND); - - if (tdesc) -*************** -*** 6990,6994 **** - list = list_rest_of_args (); - -! if (list == 0 && unbound_vars_is_error) - { - uerror[0] = '$'; ---- 6991,6995 ---- - list = list_rest_of_args (); - -! if (list == 0 && unbound_vars_is_error && (pflags & PF_IGNUNBOUND) == 0) - { - uerror[0] = '$'; -*************** -*** 7052,7056 **** - list = list_rest_of_args (); - -! if (list == 0 && unbound_vars_is_error) - { - uerror[0] = '$'; ---- 7053,7057 ---- - list = list_rest_of_args (); - -! if (list == 0 && unbound_vars_is_error && (pflags & PF_IGNUNBOUND) == 0) - { - uerror[0] = '$'; - - -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 12 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 13 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-014 b/testing/source/bash/bash-4.0-patches/bash40-014 deleted file mode 100644 index eeba336cd..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-014 +++ /dev/null @@ -1,113 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-014 - -Bug-Reported-by: smallnow@gmail.com -Bug-Reference-ID: <49C460FE.40307@gmail.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00166.html - -Bug-Description: - -When the fc builtin is run in a command substitution from a shell with history -enabled, it does not correctly calculate the command on which to operate. - -Patch: - -*** ../bash-4.0-patched/builtins/fc.def 2009-01-04 14:32:22.000000000 -0500 ---- builtins/fc.def 2009-03-21 14:03:43.000000000 -0400 -*************** -*** 89,92 **** ---- 89,93 ---- - extern int literal_history; - extern int posixly_correct; -+ extern int subshell_environment, interactive_shell; - - extern int unlink __P((const char *)); -*************** -*** 173,177 **** - register char *sep; - int numbering, reverse, listing, execute; -! int histbeg, histend, last_hist, retval, opt; - FILE *stream; - REPL *rlist, *rl; ---- 174,178 ---- - register char *sep; - int numbering, reverse, listing, execute; -! int histbeg, histend, last_hist, retval, opt, rh; - FILE *stream; - REPL *rlist, *rl; -*************** -*** 276,279 **** ---- 277,282 ---- - fprintf (stderr, "%s\n", command); - fc_replhist (command); /* replace `fc -s' with command */ -+ /* Posix says that the re-executed commands should be entered into the -+ history. */ - return (parse_and_execute (command, "fc", SEVAL_NOHIST)); - } -*************** -*** 294,298 **** - so we check hist_last_line_added. */ - -! last_hist = i - remember_on_history - hist_last_line_added; - - if (list) ---- 297,306 ---- - so we check hist_last_line_added. */ - -! /* Even though command substitution through parse_and_execute turns off -! remember_on_history, command substitution in a shell when set -o history -! has been enabled (interactive or not) should use it in the last_hist -! calculation as if it were on. */ -! rh = remember_on_history || ((subshell_environment & SUBSHELL_COMSUB) && enable_history_list); -! last_hist = i - rh - hist_last_line_added; - - if (list) -*************** -*** 457,461 **** - HIST_ENTRY **hlist; - { -! int sign, n, clen; - register int i, j; - register char *s; ---- 465,469 ---- - HIST_ENTRY **hlist; - { -! int sign, n, clen, rh; - register int i, j; - register char *s; -*************** -*** 473,477 **** - so we check hist_last_line_added. This needs to agree with the - calculation of last_hist in fc_builtin above. */ -! i -= remember_on_history + hist_last_line_added; - - /* No specification defaults to most recent command. */ ---- 481,490 ---- - so we check hist_last_line_added. This needs to agree with the - calculation of last_hist in fc_builtin above. */ -! /* Even though command substitution through parse_and_execute turns off -! remember_on_history, command substitution in a shell when set -o history -! has been enabled (interactive or not) should use it in the last_hist -! calculation as if it were on. */ -! rh = remember_on_history || ((subshell_environment & SUBSHELL_COMSUB) && enable_history_list); -! i -= rh + hist_last_line_added; - - /* No specification defaults to most recent command. */ -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 13 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 14 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-015 b/testing/source/bash/bash-4.0-patches/bash40-015 deleted file mode 100644 index c3e8d3346..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-015 +++ /dev/null @@ -1,84 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-015 - -Bug-Reported-by: Lubomir Rintel <lkundrak@v3.sk> -Bug-Reference-ID: <1237654931.32737.13.camel@localhost.localdomain> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00174.html - -Bug-Description: - -Deferring handling of signals which should cause the shell to terminate until -it is "safe" to run the handler functions does not work for some terminating -signals. - -Patch: - -*** ../bash-4.0-patched/sig.c 2009-01-04 14:32:41.000000000 -0500 ---- sig.c 2009-03-22 14:47:56.000000000 -0400 -*************** -*** 449,452 **** ---- 449,494 ---- - int sig; - { -+ /* If we get called twice with the same signal before handling it, -+ terminate right away. */ -+ if ( -+ #ifdef SIGHUP -+ sig != SIGHUP && -+ #endif -+ #ifdef SIGINT -+ sig != SIGINT && -+ #endif -+ #ifdef SIGDANGER -+ sig != SIGDANGER && -+ #endif -+ #ifdef SIGPIPE -+ sig != SIGPIPE && -+ #endif -+ #ifdef SIGALRM -+ sig != SIGALRM && -+ #endif -+ #ifdef SIGTERM -+ sig != SIGTERM && -+ #endif -+ #ifdef SIGXCPU -+ sig != SIGXCPU && -+ #endif -+ #ifdef SIGXFSZ -+ sig != SIGXFSZ && -+ #endif -+ #ifdef SIGVTALRM -+ sig != SIGVTALRM && -+ #endif -+ #ifdef SIGLOST -+ sig != SIGLOST && -+ #endif -+ #ifdef SIGUSR1 -+ sig != SIGUSR1 && -+ #endif -+ #ifdef SIGUSR2 -+ sig != SIGUSR2 && -+ #endif -+ sig == terminating_signal) -+ terminate_immediately = 1; -+ - terminating_signal = sig; - -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 14 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 15 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-016 b/testing/source/bash/bash-4.0-patches/bash40-016 deleted file mode 100644 index ace2e1e5f..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-016 +++ /dev/null @@ -1,104 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-016 - -Bug-Reported-by: Brian J. Murrell" <brian@interlinx.bc.ca> -Bug-Reference-ID: <1237564627.7666.12.camel@pc.interlinx.bc.ca> -Bug-Reference-URL:http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00160.html - -Bug-Description: - -There are several problems with the handling of $LINENO in an ERR trap. - -Patch: - -*** ../bash-4.0-patched/trap.c 2009-01-16 17:07:53.000000000 -0500 ---- trap.c 2009-03-20 21:37:00.000000000 -0400 -*************** -*** 756,760 **** - - flags = SEVAL_NONINT|SEVAL_NOHIST; -! if (sig != DEBUG_TRAP && sig != RETURN_TRAP) - flags |= SEVAL_RESETLINE; - if (function_code == 0) ---- 756,760 ---- - - flags = SEVAL_NONINT|SEVAL_NOHIST; -! if (sig != DEBUG_TRAP && sig != RETURN_TRAP && sig != ERROR_TRAP) - flags |= SEVAL_RESETLINE; - if (function_code == 0) -*** ../bash-4.0-patched/execute_cmd.c 2009-02-13 16:41:41.000000000 -0500 ---- execute_cmd.c 2009-03-21 14:16:11.000000000 -0400 -*************** -*** 569,572 **** ---- 569,573 ---- - /* Fork a subshell, turn off the subshell bit, turn off job - control and call execute_command () on the command again. */ -+ line_number_for_err_trap = line_number; - paren_pid = make_child (savestring (make_command_string (command)), - asynchronous); -*************** -*** 611,615 **** ---- 612,619 ---- - { - last_command_exit_value = exec_result; -+ save_line_number = line_number; -+ line_number = line_number_for_err_trap; - run_error_trap (); -+ line_number = save_line_number; - } - -*************** -*** 767,771 **** ---- 771,777 ---- - { - last_command_exit_value = exec_result; -+ line_number = line_number_for_err_trap; - run_error_trap (); -+ line_number = save_line_number; - } - -*************** -*** 2106,2109 **** ---- 2112,2116 ---- - COMMAND *tc, *second; - int ignore_return, exec_result, was_error_trap, invert; -+ volatile int save_line_number; - - ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0; -*************** -*** 2175,2178 **** ---- 2182,2186 ---- - ignore_return = (command->flags & CMD_IGNORE_RETURN) != 0; - -+ line_number_for_err_trap = line_number; - exec_result = execute_pipeline (command, asynchronous, pipe_in, pipe_out, fds_to_close); - -*************** -*** 2180,2184 **** ---- 2188,2195 ---- - { - last_command_exit_value = exec_result; -+ save_line_number = line_number; -+ line_number = line_number_for_err_trap; - run_error_trap (); -+ line_number = save_line_number; - } - -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 15 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 16 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-017 b/testing/source/bash/bash-4.0-patches/bash40-017 deleted file mode 100644 index ff42d7781..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-017 +++ /dev/null @@ -1,47 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-017 - -Bug-Reported-by: Lubomir Rintel <lkundrak@v3.sk> -Bug-Reference-ID: <1237654931.32737.13.camel@localhost.localdomain> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00174.html - -Bug-Description: - -Adding a null line to a here-document (e.g., by hitting EOF) causes the -shell to dump core attempting to dereference the NULL pointer. - -Patch: - -*** ../bash-4.0-patched/parse.y 2009-03-08 21:24:47.000000000 -0400 ---- parse.y 2009-03-21 14:38:42.000000000 -0400 -*************** -*** 1880,1884 **** - ret = read_a_line (remove_quoted_newline); - #if defined (HISTORY) -! if (remember_on_history && (parser_state & PST_HEREDOC)) - { - /* To make adding the the here-document body right, we need to rely ---- 1880,1884 ---- - ret = read_a_line (remove_quoted_newline); - #if defined (HISTORY) -! if (ret && remember_on_history && (parser_state & PST_HEREDOC)) - { - /* To make adding the the here-document body right, we need to rely -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 16 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 17 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-018 b/testing/source/bash/bash-4.0-patches/bash40-018 deleted file mode 100644 index 35f33e5fe..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-018 +++ /dev/null @@ -1,78 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-018 - -Bug-Reported-by: Dan Price <dp@eng.sun.com> -Bug-Reference-ID: <20090324171502.GA20582@eng.sun.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00184.html - -Bug-Description: - -A missing include file results in an empty function definition and a no-op -when checking whether or not the window size has changed. - -Patch: - -*** ../bash-4.0-patched/lib/sh/winsize.c 2008-08-12 13:53:51.000000000 -0400 ---- lib/sh/winsize.c 2009-04-06 10:44:20.000000000 -0400 -*************** -*** 31,44 **** - #include <sys/ioctl.h> - -! #if !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) -! /* For struct winsize on SCO */ -! /* sys/ptem.h has winsize but needs mblk_t from sys/stream.h */ -! # if defined (HAVE_SYS_PTEM_H) && defined (TIOCGWINSZ) && defined (SIGWINCH) -! # if defined (HAVE_SYS_STREAM_H) -! # include <sys/stream.h> -! # endif - # include <sys/ptem.h> -! # endif /* HAVE_SYS_PTEM_H && TIOCGWINSZ && SIGWINCH */ -! #endif /* !STRUCT_WINSIZE_IN_SYS_IOCTL */ - - #include <stdio.h> ---- 31,57 ---- - #include <sys/ioctl.h> - -! /* Try to find the definitions of `struct winsize' and TIOGCWINSZ */ -! -! #if defined (GWINSZ_IN_SYS_IOCTL) && !defined (TIOCGWINSZ) -! # include <sys/ioctl.h> -! #endif /* GWINSZ_IN_SYS_IOCTL && !TIOCGWINSZ */ -! -! #if defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) -! # include <termios.h> -! #endif /* STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ -! -! /* Not in either of the standard places, look around. */ -! #if !defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) -! # if defined (HAVE_SYS_STREAM_H) -! # include <sys/stream.h> -! # endif /* HAVE_SYS_STREAM_H */ -! # if defined (HAVE_SYS_PTEM_H) /* SVR4.2, at least, has it here */ - # include <sys/ptem.h> -! # define _IO_PTEM_H /* work around SVR4.2 1.1.4 bug */ -! # endif /* HAVE_SYS_PTEM_H */ -! # if defined (HAVE_SYS_PTE_H) /* ??? */ -! # include <sys/pte.h> -! # endif /* HAVE_SYS_PTE_H */ -! #endif /* !STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ - - #include <stdio.h> -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 17 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 18 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-019 b/testing/source/bash/bash-4.0-patches/bash40-019 deleted file mode 100644 index 30efd6806..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-019 +++ /dev/null @@ -1,125 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-019 - -Bug-Reported-by: Oleksiy Melnyk <lex@upc.ua> -Bug-Reference-ID: <20090224142233.D2FEFC004@floyd.upc.ua> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-02/msg00200.html - -Bug-Description: - -Using an external command as part of the DEBUG trap when job control is -enabled causes pipelines to misbehave. The problem has to do with process -groups assigned to the pipeline and terminal. - -Patch: - -*** ../bash-4.0-patched/jobs.c 2009-01-29 17:09:49.000000000 -0500 ---- jobs.c 2009-04-17 21:08:20.000000000 -0400 -*************** -*** 443,447 **** - the_pipeline = saved_pipeline; - already_making_children = saved_already_making_children; -! if (discard) - discard_pipeline (old_pipeline); - } ---- 443,447 ---- - the_pipeline = saved_pipeline; - already_making_children = saved_already_making_children; -! if (discard && old_pipeline) - discard_pipeline (old_pipeline); - } -*************** -*** 4203,4205 **** ---- 4204,4225 ---- - } - -+ void -+ save_pgrp_pipe (p, clear) -+ int *p; -+ int clear; -+ { -+ p[0] = pgrp_pipe[0]; -+ p[1] = pgrp_pipe[1]; -+ if (clear) -+ pgrp_pipe[0] = pgrp_pipe[1] = -1; -+ } -+ -+ void -+ restore_pgrp_pipe (p) -+ int *p; -+ { -+ pgrp_pipe[0] = p[0]; -+ pgrp_pipe[1] = p[1]; -+ } -+ - #endif /* PGRP_PIPE */ -*** ../bash-4.0-patched/jobs.h 2009-01-04 14:32:29.000000000 -0500 ---- jobs.h 2009-04-17 15:07:51.000000000 -0400 -*************** -*** 236,239 **** ---- 236,241 ---- - - extern void close_pgrp_pipe __P((void)); -+ extern void save_pgrp_pipe __P((int *, int)); -+ extern void restore_pgrp_pipe __P((int *)); - - #if defined (JOB_CONTROL) -*** ../bash-4.0-patched/trap.c 2009-01-16 17:07:53.000000000 -0500 ---- trap.c 2009-04-17 22:22:36.000000000 -0400 -*************** -*** 799,802 **** ---- 799,804 ---- - { - int trap_exit_value; -+ pid_t save_pgrp; -+ int save_pipe[2]; - - /* XXX - question: should the DEBUG trap inherit the RETURN trap? */ -*************** -*** 804,808 **** ---- 806,832 ---- - if ((sigmodes[DEBUG_TRAP] & SIG_TRAPPED) && ((sigmodes[DEBUG_TRAP] & SIG_IGNORED) == 0) && ((sigmodes[DEBUG_TRAP] & SIG_INPROGRESS) == 0)) - { -+ #if defined (JOB_CONTROL) -+ save_pgrp = pipeline_pgrp; -+ pipeline_pgrp = 0; -+ save_pipeline (1); -+ # if defined (PGRP_PIPE) -+ save_pgrp_pipe (save_pipe, 1); -+ # endif -+ stop_making_children (); -+ #endif -+ - trap_exit_value = _run_trap_internal (DEBUG_TRAP, "debug trap"); -+ -+ #if defined (JOB_CONTROL) -+ pipeline_pgrp = save_pgrp; -+ restore_pipeline (1); -+ # if defined (PGRP_PIPE) -+ close_pgrp_pipe (); -+ restore_pgrp_pipe (save_pipe); -+ # endif -+ if (pipeline_pgrp > 0) -+ give_terminal_to (pipeline_pgrp, 1); -+ notify_and_cleanup (); -+ #endif - - #if defined (DEBUGGER) -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 18 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 19 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-020 b/testing/source/bash/bash-4.0-patches/bash40-020 deleted file mode 100644 index 885f15efe..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-020 +++ /dev/null @@ -1,83 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-020 - -Bug-Reported-by: Nicolai Lissner <nlissne@linux01.org> -Bug-Reference-ID: <20090412020510.GA29658@lilith> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-04/msg00104.html - -Bug-Description: - -If a SIGWINCH arrives while bash is performing redisplay, multi-line prompts -are displayed incorrectly due to the display code being called recursively. - -Patch: - -*** ../bash-4.0-patched/lib/readline/readline.h 2009-01-04 14:32:33.000000000 -0500 ---- lib/readline/readline.h 2009-04-13 08:47:00.000000000 -0400 -*************** -*** 815,820 **** - #define RL_STATE_MULTIKEY 0x200000 /* reading multiple-key command */ - #define RL_STATE_VICMDONCE 0x400000 /* entered vi command mode at least once */ - -! #define RL_STATE_DONE 0x800000 /* done; accepted line */ - - #define RL_SETSTATE(x) (rl_readline_state |= (x)) ---- 815,821 ---- - #define RL_STATE_MULTIKEY 0x200000 /* reading multiple-key command */ - #define RL_STATE_VICMDONCE 0x400000 /* entered vi command mode at least once */ -+ #define RL_STATE_REDISPLAYING 0x800000 /* updating terminal display */ - -! #define RL_STATE_DONE 0x1000000 /* done; accepted line */ - - #define RL_SETSTATE(x) (rl_readline_state |= (x)) -*** ../bash-4.0-patched/lib/readline/display.c 2009-01-04 14:32:32.000000000 -0500 ---- lib/readline/display.c 2009-04-13 08:29:54.000000000 -0400 -*************** -*** 513,516 **** ---- 513,517 ---- - data structures. */ - _rl_block_sigint (); -+ RL_SETSTATE (RL_STATE_REDISPLAYING); - - if (!rl_display_prompt) -*************** -*** 1237,1240 **** ---- 1238,1242 ---- - } - -+ RL_UNSETSTATE (RL_STATE_REDISPLAYING); - _rl_release_sigint (); - } -*** ../bash-4.0-patched/lib/readline/terminal.c 2009-01-04 14:32:34.000000000 -0500 ---- lib/readline/terminal.c 2009-04-13 08:43:00.000000000 -0400 -*************** -*** 356,360 **** - if (CUSTOM_REDISPLAY_FUNC ()) - rl_forced_update_display (); -! else - _rl_redisplay_after_sigwinch (); - } ---- 356,360 ---- - if (CUSTOM_REDISPLAY_FUNC ()) - rl_forced_update_display (); -! else if (RL_ISSTATE(RL_STATE_REDISPLAYING) == 0) - _rl_redisplay_after_sigwinch (); - } -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 19 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 20 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-021 b/testing/source/bash/bash-4.0-patches/bash40-021 deleted file mode 100644 index cf6ee1f5a..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-021 +++ /dev/null @@ -1,48 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-021 - -Bug-Reported-by: Matt Zyzik <matt.zyzik@nyu.edu> -Bug-Reference-ID: <20090319015542.696F62B8E8@ice.filescope.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00149.html - -Bug-Description: - -When not in a locale supporting multibyte characters, readline will occasionally -not erase characters between the cursor position and the end of the line -when killing text backwards. - -Patch: - -*** ../bash-4.0-patched/lib/readline/display.c 2009-01-04 14:32:32.000000000 -0500 ---- lib/readline/display.c 2009-04-14 14:00:18.000000000 -0400 -*************** -*** 1775,1779 **** - adjust col_lendiff based on the difference between _rl_last_c_pos - and _rl_screenwidth */ -! if (col_lendiff && (_rl_last_c_pos < _rl_screenwidth)) - #endif - { ---- 1775,1779 ---- - adjust col_lendiff based on the difference between _rl_last_c_pos - and _rl_screenwidth */ -! if (col_lendiff && ((MB_CUR_MAX == 1 || rl_byte_oriented) || (_rl_last_c_pos < _rl_screenwidth))) - #endif - { -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 20 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 21 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-022 b/testing/source/bash/bash-4.0-patches/bash40-022 deleted file mode 100644 index 5b6853805..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-022 +++ /dev/null @@ -1,48 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-022 - -Bug-Reported-by: Bernd Eggink <monoped@sudrala.de> -Bug-Reference-ID: <49E65407.5010206@sudrala.de> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-04/msg00118.html - -Bug-Description: - -When parsing case statements in command substitutions, the shell did not -note that a newline is a shell metacharacter and can legally be followed -by a reserved word (e.g., `esac'). - -Patch: - -*** ../bash-4.0-patched/parse.y 2009-03-08 21:24:47.000000000 -0400 ---- parse.y 2009-04-15 22:27:56.000000000 -0400 -*************** -*** 3355,3359 **** - - /* Meta-characters that can introduce a reserved word. Not perfect yet. */ -! if MBTEST((tflags & LEX_RESWDOK) == 0 && (tflags & LEX_CKCASE) && (tflags & LEX_INCOMMENT) == 0 && shellmeta(ch)) - { - /* Add this character. */ ---- 3375,3379 ---- - - /* Meta-characters that can introduce a reserved word. Not perfect yet. */ -! if MBTEST((tflags & LEX_RESWDOK) == 0 && (tflags & LEX_CKCASE) && (tflags & LEX_INCOMMENT) == 0 && (shellmeta(ch) || ch == '\n')) - { - /* Add this character. */ -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 21 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 22 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-023 b/testing/source/bash/bash-4.0-patches/bash40-023 deleted file mode 100644 index d2376c7da..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-023 +++ /dev/null @@ -1,62 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-023 - -Bug-Reported-by: Andreas Schwab <schwab@linux-m68k.org> -Bug-Reference-ID: <m21vrhhx08.fsf@igel.home> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-04/msg00160.html - -Bug-Description: - -If the prompt length exactly matches the screen width, and the prompt ends -with invisible characters, readline positions the cursor incorrectly. - -Patch: - -*** ../bash-4.0-patched/lib/readline/display.c 2009-01-04 14:32:32.000000000 -0500 ---- lib/readline/display.c 2009-04-25 21:42:18.000000000 -0400 -*************** -*** 1895,1898 **** ---- 1897,1904 ---- - woff = WRAP_OFFSET (_rl_last_v_pos, wrap_offset); - cpos = _rl_last_c_pos; -+ -+ if (cpos == 0 && cpos == new) -+ return; -+ - #if defined (HANDLE_MULTIBYTE) - /* If we have multibyte characters, NEW is indexed by the buffer point in -*************** -*** 1908,1914 **** - desired display position. */ - if ((new > prompt_last_invisible) || /* XXX - don't use woff here */ -! (prompt_physical_chars > _rl_screenwidth && - _rl_last_v_pos == prompt_last_screen_line && -! wrap_offset >= woff && - new > (prompt_last_invisible-(_rl_screenwidth*_rl_last_v_pos)-wrap_offset))) - /* XXX last comparison might need to be >= */ ---- 1914,1920 ---- - desired display position. */ - if ((new > prompt_last_invisible) || /* XXX - don't use woff here */ -! (prompt_physical_chars >= _rl_screenwidth && - _rl_last_v_pos == prompt_last_screen_line && -! wrap_offset >= woff && dpos >= woff && - new > (prompt_last_invisible-(_rl_screenwidth*_rl_last_v_pos)-wrap_offset))) - /* XXX last comparison might need to be >= */ -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 22 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 23 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash-4.0-patches/bash40-024 b/testing/source/bash/bash-4.0-patches/bash40-024 deleted file mode 100644 index ac2058ae3..000000000 --- a/testing/source/bash/bash-4.0-patches/bash40-024 +++ /dev/null @@ -1,112 +0,0 @@ - BASH PATCH REPORT - ================= - -Bash-Release: 4.0 -Patch-ID: bash40-024 - -Bug-Reported-by: Matt Zyzik <matt.zyzik@nyu.edu> -Bug-Reference-ID: <20090405205428.4FDEA1C7175@ice.filescope.com> -Bug-Reference-URL: http://lists.gnu.org/archive/html/bug-bash/2009-04/msg00021.html - -Bug-Description: - -When using the ** globbing operator, bash will incorrectly add an extra -directory name when the preceding directory name ends with `*' or an empty -string when there is no preceding directory name. - -Patch: - -*** ../bash-4.0-patched/lib/glob/glob.c 2009-01-04 14:32:30.000000000 -0500 ---- lib/glob/glob.c 2009-04-28 10:22:29.000000000 -0400 -*************** -*** 357,361 **** - if (ep) - *ep = 0; -! if (r) - free (r); - return (struct globval *)0; ---- 357,361 ---- - if (ep) - *ep = 0; -! if (r && r != &glob_error_return) - free (r); - return (struct globval *)0; -*************** -*** 666,671 **** - } - -! /* compat: if GX_ALLDIRS, add the passed directory also */ -! if (add_current) - { - sdlen = strlen (dir); ---- 666,672 ---- - } - -! /* compat: if GX_ALLDIRS, add the passed directory also, but don't add an -! empty directory name. */ -! if (add_current && (flags & GX_NULLDIR) == 0) - { - sdlen = strlen (dir); -*************** -*** 679,686 **** - nextlink->next = lastlink; - lastlink = nextlink; -! if (flags & GX_NULLDIR) -! nextname[0] = '\0'; -! else -! bcopy (dir, nextname, sdlen + 1); - ++count; - } ---- 680,684 ---- - nextlink->next = lastlink; - lastlink = nextlink; -! bcopy (dir, nextname, sdlen + 1); - ++count; - } -*************** -*** 943,947 **** - register unsigned int l; - -! array = glob_dir_to_array (directories[i], temp_results, flags); - l = 0; - while (array[l] != NULL) ---- 941,950 ---- - register unsigned int l; - -! /* If we're expanding **, we don't need to glue the directory -! name to the results; we've already done it in glob_vector */ -! if ((dflags & GX_ALLDIRS) && filename[0] == '*' && filename[1] == '*' && filename[2] == '\0') -! array = temp_results; -! else -! array = glob_dir_to_array (directories[i], temp_results, flags); - l = 0; - while (array[l] != NULL) -*************** -*** 960,964 **** - - /* Note that the elements of ARRAY are not freed. */ -! free ((char *) array); - } - } ---- 963,968 ---- - - /* Note that the elements of ARRAY are not freed. */ -! if (array != temp_results) -! free ((char *) array); - } - } -*** ../bash-4.0/patchlevel.h 2009-01-04 14:32:40.000000000 -0500 ---- patchlevel.h 2009-02-22 16:11:31.000000000 -0500 -*************** -*** 26,30 **** - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 23 - - #endif /* _PATCHLEVEL_H_ */ ---- 26,30 ---- - looks for to find the patch level (for the sccs version string). */ - -! #define PATCHLEVEL 24 - - #endif /* _PATCHLEVEL_H_ */ diff --git a/testing/source/bash/bash.SlackBuild b/testing/source/bash/bash.SlackBuild deleted file mode 100755 index fba2b632f..000000000 --- a/testing/source/bash/bash.SlackBuild +++ /dev/null @@ -1,80 +0,0 @@ -#!/bin/sh -# Set initial variables: -CWD=`pwd` -if [ "$TMP" = "" ]; then - TMP=/tmp -fi -PKG=$TMP/package-bash - -VERSION=4.0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} - -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" -fi - -if [ ! -d $TMP ]; then - mkdir -p $TMP # location to build the source -fi -rm -rf $PKG -mkdir -p $PKG - -# Determine bash patchlevel: -PATCHLEVEL="$( cd $CWD/bash-${VERSION}-patches ; /bin/ls bash40-??? | tail -1 | cut -f 2 -d - 2> /dev/null )" -if [ "$PATCHLEVEL" = "" ]; then - PATCHLEVEL=0 -fi - -cd $TMP -rm -rf bash-$VERSION -tar xjvf $CWD/bash-$VERSION.tar.bz2 || exit 1 -cd bash-$VERSION || exit 1 -chown -R root:root . -find . -perm 664 | xargs chmod 644 -find . -perm 775 | xargs chmod 755 - -if [ -d $CWD/bash-${VERSION}-patches ]; then - ( cd $CWD/bash-${VERSION}-patches ; cat bash40-??? ) | patch -p0 --verbose || exit 1 -fi - -CFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --mandir=/usr/man \ - --infodir=/usr/info \ - --build=$ARCH-slackware-linux -make -j4 || make || exit 1 -make install DESTDIR=$PKG -mv $PKG/usr/share/doc $PKG/usr -mkdir -p $PKG/bin -mv $PKG/usr/bin/bash $PKG/bin/bash4.new -strip --strip-unneeded $PKG/bin/bash4.new -# We don't include the "bashbug" script. -rm -rf $PKG/usr/bin $PKG/usr/man/man1/bashbug.1 -gzip -9 $PKG/usr/man/man1/* -mkdir -p $PKG/usr/doc/bash-$VERSION -cp -a AUTHORS CHANGES COMPAT COPYING INSTALL MANIFEST NEWS NOTES \ - README Y2K doc/FAQ doc/INTRO $PKG/usr/doc/bash-$VERSION -cd doc -groff -ms -Tascii article.ms > $PKG/usr/doc/bash-$VERSION/article.txt -# bash.1 is already installed by "make install" -for page in builtins.1 rbash.1 ; do - cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz -done -rm -f $PKG/usr/info/dir -gzip -9 $PKG/usr/info/* -mkdir -p $PKG/install -zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh -cat $CWD/slack-desc > $PKG/install/slack-desc - -# Build the package: -cd $PKG -makepkg -l y -c n $TMP/bash-$VERSION.$PATCHLEVEL-$ARCH-$BUILD.txz - diff --git a/testing/source/bash/doinst.sh b/testing/source/bash/doinst.sh deleted file mode 100644 index 867958fb8..000000000 --- a/testing/source/bash/doinst.sh +++ /dev/null @@ -1,18 +0,0 @@ -if [ -r bin/bash ]; then - mv bin/bash bin/bash.old -fi -mv bin/bash4.new bin/bash -if [ -f bin/bash.old ]; then - rm -f bin/bash.old -fi -if [ ! -r etc/shells ]; then - touch etc/shells - chmod 644 etc/shells -fi -if grep -wq /bin/bash etc/shells ; then - true -else - echo /bin/bash >> etc/shells -fi -( cd usr/bin ; rm -rf bash ) -( cd usr/bin ; ln -sf /bin/bash bash ) diff --git a/testing/source/bash/slack-desc b/testing/source/bash/slack-desc deleted file mode 100644 index f2fdb9292..000000000 --- a/testing/source/bash/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -bash: bash (sh-compatible shell) -bash: -bash: The GNU Bourne-Again SHell. Bash is a sh-compatible command -bash: interpreter that executes commands read from the standard input or -bash: from a file. Bash also incorporates useful features from the Korn -bash: and C shells (ksh and csh). Bash is ultimately intended to be a -bash: conformant implementation of the IEEE Posix Shell and Tools -bash: specification (IEEE Working Group 1003.2). -bash: -bash: Bash must be present for the system to boot properly. -bash: diff --git a/testing/source/btrfs-progs/btrfs-progs.SlackBuild b/testing/source/btrfs-progs/btrfs-progs.SlackBuild new file mode 100755 index 000000000..708e15840 --- /dev/null +++ b/testing/source/btrfs-progs/btrfs-progs.SlackBuild @@ -0,0 +1,120 @@ +#!/bin/sh +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +CWD=$(pwd) + +PKGNAM=btrfs-progs +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Download the btrfs-progs-unstable Git head if there's no tarball: +if ! /bin/ls $CWD/btrfs-progs*tar* 1> /dev/null 2> /dev/null ; then + git clone git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git + rm -r btrfs-progs-unstable/.git + tar cf btrfs-progs-$(date +%Y%m%d).tar btrfs-progs-unstable + xz -9 btrfs-progs-$(date +%Y%m%d).tar + rm -r $CWD/btrfs-progs-unstable +fi + +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | cut -f 3 -d - | cut -f 1 -d .)} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$TMP" = "" ]; then + TMP=/tmp +fi +PKG=$TMP/package-${PKGNAM} +rm -rf $PKG +mkdir -p $PKG + +cd $TMP +rm -rf btrfs-progs-unstable +tar xf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 +cd btrfs-progs-unstable + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . -perm 666 -exec chmod 644 {} \; +find . -perm 664 -exec chmod 644 {} \; +find . -perm 600 -exec chmod 644 {} \; +find . -perm 444 -exec chmod 644 {} \; +find . -perm 400 -exec chmod 644 {} \; +find . -perm 440 -exec chmod 644 {} \; +find . -perm 777 -exec chmod 755 {} \; +find . -perm 775 -exec chmod 755 {} \; +find . -perm 511 -exec chmod 755 {} \; +find . -perm 711 -exec chmod 755 {} \; +find . -perm 555 -exec chmod 755 {} \; + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Move stuff out of /usr/local: +mv $PKG/usr/local/bin $PKG/sbin +mv $PKG/usr/local/man $PKG/usr/man +rmdir $PKG/usr/local + +( cd $PKG/sbin ; ln -sf btrfsck fsck.btrfs ) + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a \ + COPYING INSTALL \ + $PKG/usr/doc/${PKGNAM}-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $TMP/package-${PKGNAM} +makepkg -l y -c n ../${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/testing/source/btrfs-progs/slack-desc b/testing/source/btrfs-progs/slack-desc new file mode 100644 index 000000000..e9088d053 --- /dev/null +++ b/testing/source/btrfs-progs/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +btrfs-progs: btrfs-progs (Btrfs filesystem utilities) +btrfs-progs: +btrfs-progs: Btrfs is a new copy on write filesystem for Linux aimed at implementing +btrfs-progs: advanced features while focusing on fault tolerance, repair and easy +btrfs-progs: administration. Initially developed by Oracle, Btrfs is licensed under +btrfs-progs: the GPL and open for contribution from anyone. Btrfs is under heavy +btrfs-progs: development, and is not suitable for any uses other than benchmarking +btrfs-progs: and review. The Btrfs disk format is not yet finalized. +btrfs-progs: +btrfs-progs: Btrfs homepage: http://btrfs.wiki.kernel.org +btrfs-progs: diff --git a/usb-and-pxe-installers/usbimg2disk.sh b/usb-and-pxe-installers/usbimg2disk.sh index d98e21de4..aed32c51b 100644 --- a/usb-and-pxe-installers/usbimg2disk.sh +++ b/usb-and-pxe-installers/usbimg2disk.sh @@ -1,7 +1,7 @@ #!/bin/sh -# $Id: usbimg2disk.sh,v 1.2 2009/05/14 10:29:38 eha Exp eha $ +# $Id: usbimg2disk.sh,v 1.9 2010/04/24 18:21:53 eha Exp eha $ # -# Copyright 2009 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Eric Hameleers, Eindhoven, NL # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,14 +24,29 @@ # Paranoid as usual: set -e +# Clean up in case of failure: +cleanup() { + # Clean up by unmounting our loopmounts, deleting tempfiles: + echo "--- Cleaning up the staging area..." + sync + umount -f ${MNTDIR1} 2>/dev/null || true + umount -f ${MNTDIR2} 2>/dev/null || true + rm -rf ${MNTDIR3} + rmdir $MNTDIR1 $MNTDIR2 +} +trap "echo \"*** $0 FAILED at line $LINENO ***\"; cleanup; exit 1" ERR INT TERM + showhelp() { echo "# " - echo "# Purpose: to use the content of Slackware's usbboot.img and transform" - echo "# a standard USB thumb drive with a single vfat partition" - echo "# into an alternative USB boot device for the Slackware installer." + echo "# Purpose #1: to use the content of Slackware's usbboot.img and" + echo "# transform a standard USB thumb drive with a single vfat partition" + echo "# into a bootable medium containing the Slackware Linux installer." + echo "# " + echo "# Purpose #2: to use the contents of a Slackware directory tree" + echo "# and transform a standard USB thumb drive with" + echo "# a single vfat partition and 2GB of free space into" + echo "# a self-contained USB installation medium for Slackware Linux." echo "# " - echo "# Reason: some computers refuse to boot from a USB thumb drive if it was" - echo "# made bootable by dumping 'usbboot.img' onto it." echo "# " echo "# Your USB thumb drive may contain data!" echo "# This data will *not* be overwritten, unless you have" @@ -43,18 +58,28 @@ showhelp() { echo "# -i|--infile <filename> Full path to the usbboot.img file" echo "# -l|--logfile <filename> Optional logfile to catch fdisk output" echo "# -o|--outdev <filename> The device name of your USB drive" + echo "# -s|--slackdir <dir> Use 'dir' as the root of Slackware tree" echo "# -u|--unattended Do not ask any questions" + echo "# -L|--label FAT label when formatting the USB drive" + echo "# " - echo "# Example:" + echo "# Examples:" echo "# " echo "# $(basename $0) -i ~/download/usbboot.img -o /dev/sdX" + echo "# $(basename $0) -f -s /home/ftp/pub/slackware-13.0 -o /dev/sdX" + echo "# " + echo "# The second example shows how to create a fully functional Slackware" + echo "# installer on a USB stick (it needs a Slackware tree as the source)." echo "# " } reformat() { # Commands to re-create a functional USB stick with VFAT partition: - # Only parameter: the name of the USB device to be formatted: - TOWIPE="$1" + # two parameters: + # (1) the name of the USB device to be formatted: + # (2) FAT label to use when formatting the USB device: + local TOWIPE="$1" + local THELABEL="$2" # Sanity checks: if [ ! -b $TOWIPE ]; then @@ -77,8 +102,11 @@ b w EOF + # We set the fat label to '$THELABEL' when formatting. + # It will enable the installer to mount the fat partition automatically + # and pre-fill the correct pathname for the "SOURCE" dialog. # Format with a vfat filesystem: - /sbin/mkdosfs -F32 ${TOWIPE}1 + /sbin/mkdosfs -F32 -n ${THELABEL} ${TOWIPE}1 } makebootable() { @@ -125,10 +153,19 @@ while [ ! -z "$1" ]; do TARGETPART="${TARGET}1" shift 2 ;; + -s|--slackdir) + REPOSROOT="$(cd $(dirname $2); pwd)/$(basename $2)" + FULLINSTALLER="yes" + shift 2 + ;; -u|--unattended) UNATTENDED=1 shift ;; + -L|--label) + FATLABEL="$2" + shift 2 + ;; *) echo "Unknown parameter '$1'!" exit 1 @@ -143,12 +180,46 @@ if [ "$($CMD_ID -u)" != "0" ]; then exit 1 fi +# Check FAT label: +if [ -n "${FATLABEL}" ]; then + if [ "x$(echo '${FATLABEL}'| tr -d '[:alnum:]_-.')" != "x" ]; then + echo "FAT label '${FATLABEL}' is not an acceptible name!" + exit 1 + elif [ ${#FATLABEL} gt 11 ]; then + echo "FAT label '${FATLABEL}' must be less than 12 characters!" + exit 1 + fi +else + FATLABEL="USBSLACKINS" +fi + # Prepare the environment: +MININSFREE=2000 # minimum in MB required for a Slackware tree UNATTENDED=${UNATTENDED:-0} # unattended means: never ask questions. REFORMAT=${REFORMAT:-0} # do not try to reformat by default LOGFILE=${LOGFILE:-/dev/null} # silence by default +EXCLUDES=${EXCLUDES:-"--exclude=source \ + --exclude=extra/aspell-word-lists \ + --exclude=isolinux \ + --exclude=usb-and-pxe-installers \ + --exclude=pasture"} # not copied onto the stick + +# If we have been given a Slackware tree, we will create a full installer: +if [ -n "$REPOSROOT" ]; then + if [ -d "$REPOSROOT" -a -f "$REPOSROOT/PACKAGES.TXT" ]; then + USBIMG=${USBIMG:-"$REPOSROOT/usb-and-pxe-installers/usbboot.img"} + PKGDIR=$(head -40 $REPOSROOT/PACKAGES.TXT | grep 'PACKAGE LOCATION: ' |head -1 |cut -f2 -d/) + if [ -z "$PKGDIR" ]; then + echo "*** Could not find the package subdirectory in '$REPOSROOT'!" + exit 1 + fi + else + echo "*** Directory '$REPOSROOT' does not look like a Slackware tree!" + exit 1 + fi +fi -# Sanity checks: +# More sanity checks: if [ -z "$TARGET" -o -z "$USBIMG" ]; then echo "*** You must specify both the names of usbboot.img and the USB device!" exit 1 @@ -162,7 +233,7 @@ fi if [ $REFORMAT -eq 0 ]; then if ! /sbin/blkid -t TYPE=vfat $TARGETPART 1>/dev/null 2>/dev/null ; then echo "*** I fail to find a 'vfat' partition: '$TARGETPART' !" - echo "*** If you want to format the USB thumb drive, add the '-f' parameter." + echo "*** If you want to format the USB thumb drive, add the '-f' parameter" exit 1 fi else @@ -173,15 +244,20 @@ else fi if mount | grep -q $TARGETPART ; then - echo "***" echo "*** Please un-mount $TARGETPART first, then re-run this script!" - echo "***" exit 1 fi # Check for prerequisites: -if [ ! -r /usr/lib/syslinux/mbr.bin -o ! -x /usr/bin/syslinux ]; then - echo "This script requires that the syslinux package is installed!" +MBRBIN="/usr/lib/syslinux/mbr.bin" +if [ ! -r $MBRBIN ]; then MBRBIN="/usr/share/syslinux/mbr.bin"; fi +if [ ! -r $MBRBIN -o ! -x /usr/bin/syslinux ]; then + echo "*** This script requires that the 'syslinux' package is installed!" + exit 1 +fi + +if [ ! -x /usr/bin/mtools ]; then + echo "*** This script requires that the 'floppy' (mtools) package is installed!" exit 1 fi @@ -190,7 +266,7 @@ if [ $UNATTENDED -eq 0 ]; then [ $REFORMAT -eq 1 ] && DOFRMT="format and " || DOFRMT="" echo "" - echo "# We are going to ${DOFRMT}use this device - '$TARGET'." + echo "# We are going to ${DOFRMT}use this device - '$TARGET':" /sbin/fdisk -l $TARGET | while read LINE ; do echo "# $LINE" ; done echo "" @@ -212,7 +288,7 @@ if [ $REFORMAT -eq 1 ]; then echo "--- Last chance! Press CTRL-C to abort!" read -p "Or press ENTER to continue: " JUNK fi - ( reformat $TARGET ) 1>>$LOGFILE 2>&1 + ( reformat $TARGET ${FATLABEL} ) 1>>$LOGFILE 2>&1 fi # Create a temporary mount point for the image file: @@ -234,45 +310,107 @@ else chmod 700 $MNTDIR2 fi +# Create a temporary directory to extract the initrd if needed: +MNTDIR3=$(mktemp -d -p /mnt -t initrd.XXXXXX) +if [ ! -d $MNTDIR3 ]; then + echo "*** Failed to create a temporary directory to extract the initrd!" + exit 1 +else + chmod 700 $MNTDIR3 +fi + # Mount the image file: -mount -o loop $USBIMG $MNTDIR1 +mount -o loop,ro $USBIMG $MNTDIR1 + +# Mount the vfat partition: +mount -t vfat -o shortname=mixed $TARGETPART $MNTDIR2 -# Mount the vfat partition -mount $TARGETPART $MNTDIR2 +# Do we have space to create a full Slackware USB install medium? +if [ "$FULLINSTALLER" = "yes" ]; then + if [ $(df --block=1MB $TARGETPART |grep "^$TARGETPART" |tr -s ' ' |cut -f4 -d' ') -le $MININSFREE ]; then + echo "*** The partition '$TARGETPART' does not have enough" + echo "*** free space (${MININSFREE} MB) to create a Slackware installation medium!" + cleanup + exit 1 + fi +fi -# Check available space: -USBFREE=$(df -k $TARGETPART | grep "^$TARGETPART" |tr -s ' ' | cut -d' ' -f4) -IMGSIZE=$(du -k $USBIMG | cut -f1) +# Check available space for a Slackware USB setup bootdisk: +USBFREE=$(df -k $TARGETPART |grep "^$TARGETPART" |tr -s ' ' |cut -d' ' -f4) +IMGSIZE=$(du -k $USBIMG |cut -f1) echo "--- Available free space on the the USB drive is $USBFREE KB" -echo "--- Required free space: $IMGSIZE KB" +echo "--- Required free space for installer: $IMGSIZE KB" -# Exit when the image size appears larger than available space: +# Exit when the installer image's size does not fit in available space: if [ $IMGSIZE -gt $USBFREE ]; then echo "*** The USB thumb drive does not have enough free space!" # Cleanup and exit: - umount -f $MNTDIR1 - umount -f $MNTDIR2 - rmdir $MNTDIR1 $MNTDIR2 + cleanup exit 1 fi -# Copy files to the USB disk in it's own subdirectory '/syslinux' -echo "--- Copying files to the USB drive..." +if [ $UNATTENDED -eq 0 ]; then + # if we are running interactively, warn about overwriting files: + if [ -n "$REPOSROOT" ]; then + if [ -d $MNTDIR2/syslinux -o -d $MNTDIR2/$(basename $REPOSROOT) ]; then + echo "--- Your USB drive contains directories 'syslinux' and/or '$(basename $REPOSROOT)'" + echo "--- These will be overwritten. Press CTRL-C to abort now!" + read -p "Or press ENTER to continue: " JUNK + fi + else + if [ -d $MNTDIR2/syslinux ]; then + echo "--- Your USB drive contains directory 'syslinux'" + echo "--- This will be overwritten. Press CTRL-C to abort now!" + read -p "Or press ENTER to continue: " JUNK + fi + fi +fi + +# Copy boot image files to the USB disk in its own subdirectory '/syslinux': +echo "--- Copying boot files to the USB drive..." mkdir -p $MNTDIR2/syslinux cp -a $MNTDIR1/* $MNTDIR2/syslinux/ rm -f $MNTDIR2/syslinux/ldlinux.sys -# Unmount everything: -umount -f $MNTDIR1 -umount -f $MNTDIR2 +# If we are creating a full Slackware installer, there is a lot more to do: +if [ "$FULLINSTALLER" = "yes" ]; then + # Extract the Slackware initrd for modifications we have to do: + echo "--- Extracting Slackware initrd.img..." + ( cd ${MNTDIR3}/ + gunzip -cd ${MNTDIR2}/syslinux/initrd.img | cpio -i -d -H newc --no-absolute-filenames + ) 2>>$LOGFILE + + # Modify installer files so that installing from USB stick will be easier: + echo "--- Modifying installer files..." + ( cd ${MNTDIR3}/ + # Try to automatically mount the installer partition: + mkdir usbinstall + echo "mount -t vfat -o ro,shortname=mixed \$(/sbin/blkid -t LABEL=$FATLABEL | cut -f1 -d:) /usbinstall 1>/dev/null 2>&1" >> etc/rc.d/rc.S + # Adapt the dialogs so that pressing [OK] will be all there is to it: + sed -i -e 's# --menu# --default-item 6 --menu#' usr/lib/setup/SeTmedia + sed -i -e "s# 2> \$TMP/sourcedir# /usbinstall/$(basename $REPOSROOT)/$PKGDIR 2> \$TMP/sourcedir#" usr/lib/setup/INSdir + ) 2>>$LOGFILE + + # Recreate the initrd: + echo "--- Gzipping the initrd image again:" + ( cd ${MNTDIR3}/ + find . |cpio -o -H newc |gzip > ${MNTDIR2}/syslinux/initrd.img + ) 2>>$LOGFILE + + # Copy Slackware package tree (no sources) to the USB disk - + # we already made sure that ${REPOSROOT} does not end with a '/' + echo "--- Copying Slackware package tree to the USB drive..." + rsync -rptHDL $EXCLUDES $REPOSROOT $MNTDIR2/ +fi -# Remove the temporary directories: -rmdir $MNTDIR1 $MNTDIR2 +# Unmount/remove stuff: +sync +cleanup # Run syslinux and write a good MBR: echo "--- Making the USB drive '$TARGET' bootable..." ( makebootable $TARGET ) 1>>$LOGFILE 2>&1 /usr/bin/syslinux -s -d /syslinux $TARGETPART 1>>$LOGFILE 2>&1 -dd if=/usr/lib/syslinux/mbr.bin of=$TARGET 1>>$LOGFILE 2>&1 +dd if=$MBRBIN of=$TARGET 1>>$LOGFILE 2>&1 # THE END |