Wed Feb 12 05:05:50 UTC 202020200212050550

Hey folks! PAM has finally landed in /testing. Some here wanted it to go
right into the main tree immediately, and in a more normal development cycle
I'd have been inclined to agree (it is -current, after all). But it's
probably better for it to appear in /testing first, to make sure we didn't
miss any bugs and also to serve as a warning shot that we'll be shaking up
the tree pretty good over the next few weeks. I'd like to see this merged
into the main tree in a day or two, so any testing is greatly appreciated.
Switching to the PAM packages (or reverting from them) is as easy as
installing all of them with upgradepkg --install-new, and if reverting then
remove the three leftover _pam packages. After reverting, a bit of residue
will remain in /etc/pam.d/ and /etc/security/ which can either be manually
deleted or simply ignored. While there are many more features available in
PAM compared with plain shadow, out of the box about the only noticable
change is the use of cracklib and libpwquality to check the quality of a
user-supplied password. Hopefully having PAM and krb5 will get us on track
to having proper Active Directory integration as well as using code paths
that are likely better audited these days. The attack surface *might* be
bigger, but it's also a lot better scrutinized.
Thanks to Robby Workman and Vincent Batts who did most of the initial heavy
lifting on the core PAM packages as a side project for many years. Thanks
also to Phantom X whose PAM related SlackBuilds were a valuable reference.
And thanks as well to ivandi - I learned a lot from the SlackMATE build
scripts and was even occasionally thankful for the amusing ways you would
kick my ass on LQ. ;-) You're more than welcome to let us know where we've
messed up this time.
The binutils and glibc packages in /testing were removed and are off the
table for now. I'm not seeing much upside to heading down that rabbit hole
at the moment. Next we need to be looking at Xfce 4.14 and Plasma 5.18 LTS
and some other things that have been held back since KDE4 couldn't use them.
Cheers! :-)
a/kernel-generic-5.4.19-x86_64-1.txz:  Upgraded.
a/kernel-huge-5.4.19-x86_64-1.txz:  Upgraded.
a/kernel-modules-5.4.19-x86_64-1.txz:  Upgraded.
a/lvm2-2.03.08-x86_64-1.txz:  Upgraded.
a/shadow-4.8.1-x86_64-2.txz:  Rebuilt.
  Automatically backup /etc/login.defs and install the new version if
  incompatible PAM options are detected.
d/kernel-headers-5.4.19-x86-1.txz:  Upgraded.
k/kernel-source-5.4.19-noarch-1.txz:  Upgraded.
  VALIDATE_FS_PARSER y -> n
xap/mozilla-thunderbird-68.5.0-x86_64-1.txz:  Upgraded.
  This release contains security fixes and improvements.
  For more information, see:
    https://www.mozilla.org/en-US/thunderbird/68.5.0/releasenotes/
    https://www.mozilla.org/en-US/security/advisories/mfsa2020-07/
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6793
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6794
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6795
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6797
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6798
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6792
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6800
  (* Security fix *)
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/at-3.2.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txz:  Added.
testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txz:  Added.
testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txz:  Added.
testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txz:  Added.
testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txz:  Added.
testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txz:  Added.
testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txz:  Added.
testing/packages/PAM/libcap-2.31-x86_64-1_pam.txz:  Added.
testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txz:  Added.
testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txz:  Added.
testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txz:  Added.
testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txz:  Added.
testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txz:  Added.
testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txz:  Added.
testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/polkit-0.116-x86_64-1_pam.txz:  Added.
testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txz:  Added.
testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txz:  Added.
testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txz:  Added.
testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txz:  Added.
testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txz:  Added.
testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txz:  Added.
testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txz:  Added.
testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txz:  Added.
testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txz:  Added.
testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txz:  Added.
testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txz:  Added.
testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txz:  Added.
testing/packages/binutils-2.34-x86_64-1.txz:  Removed.
testing/packages/glibc-2.31-x86_64-1.txz:  Removed.
testing/packages/glibc-i18n-2.31-x86_64-1.txz:  Removed.
testing/packages/glibc-profile-2.31-x86_64-1.txz:  Removed.
testing/packages/glibc-solibs-2.31-x86_64-1.txz:  Removed.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

15 files changed, 0 insertions, 1211 deletions

diff --git a/testing/source/glibc/doinst.sh-glibc b/testing/source/glibc/doinst.sh-glibc
deleted file mode 100644
index e2c7d3ef1..000000000
--- a/testing/source/glibc/doinst.sh-glibc
+++ /dev/null
@@ -1,164 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2002, 2005  Slackware Linux, Inc.
-# Copyright 2005, 2006, 2007, 2011, 2012, 2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# Swap glibc on the fly.
-#
-# If we're on a running system we have to handle this _very_ carefully.  :-)
-# The tricks involved here get trickier every time...
-
-# OK, now we have to be sure of a few things.  First, you do have a 2.6
-# kernel running, right?
-
-if [ -r /proc/ksyms ]; then
-  echo "FATAL: you need to be running a 2.6.x kernel in order to upgrade"
-  echo "to this version of glibc."
-  echo
-  sleep 999
-  exit 1
-fi
-
-# Next, stop using the /lib/ntpl libraries.  These are now obsolete and
-# will break the installation if present:
-if [ -d lib/tls ]; then
-  mkdir -p lib/obsolete
-  mv lib/tls lib/obsolete
-fi
-if [ -x sbin/ldconfig ]; then
-  sbin/ldconfig -r . 2> /dev/null
-fi
-
-# Install NPTL glibc libraries:
-if [ -x /sbin/ldconfig -a -d lib/incoming ]; then # swap on the fly
-  # Try to protect with flock against another installpkg/removepkg running
-  # ldconfig while we're doing the on-the-fly install:
-  mkdir -p run/lock/pkgtools
-  ( flock 9 || exit 11
-    # First create copies of the incoming libraries:
-    ( cd lib/incoming
-      for file in * ; do
-        if [ ! -r ../${file}.incoming ]; then
-          cp -a $file ../${file}.incoming
-        fi
-      done
-    )
-    # Then switch to them all at once:
-    /sbin/ldconfig -l lib/*.incoming 2> /dev/null
-    # Remove old versions of the glibc libraries. If you really don't want to
-    # do this for some reason, create a file /etc/glibc-nowipe.
-    if [ ! -r etc/glibc-nowipe ]; then
-      ( cd lib
-        for INCOMING in incoming/*-* ; do
-          LIBPREFIX=$(basename $INCOMING | cut -f 1 -d -)
-          for LIBRARY in ${LIBPREFIX}-* ; do
-            # Don't remove the library if it ends in .incoming:
-            if [ "$(echo $LIBRARY | rev | cut -f 1 -d .)" = "gnimocni" ]; then
-              continue
-            fi
-            # Don't remove symlinks:
-            if [ -L $LIBRARY ]; then
-              continue
-            fi
-            rm -f $LIBRARY
-          done
-        done
-      )
-    fi
-    # Finally, rename them and clean up:
-    ( cd lib
-      for file in *.incoming ; do
-        rm -f `basename $file .incoming`
-        cp -a $file `basename $file .incoming`
-        /sbin/ldconfig -l `basename $file .incoming` 2> /dev/null
-        rm -f $file
-      done
-    )
-  ) 9> run/lock/pkgtools/ldconfig.lock
-else # no ldconfig? This is a broken situation, but we will do what we can:
-  ( cd lib/incoming
-    for file in * ; do
-      cp -a $file ..
-    done
-  )
-fi
-# Now, get rid of the temporary directory:
-rm -rf lib/incoming
-# Done installing NPTL glibc libraries.
-
-# Handle config files:
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-config etc/nscd.conf.new
-config etc/profile.d/glibc.csh.new
-config etc/profile.d/glibc.sh.new
-# Clearly you already decided this issue.  :-)
-rm -f etc/profile.d/glibc.csh.new
-rm -f etc/profile.d/glibc.sh.new
-
-# This block below *should* be dead code, but it's probably safer to leave it
-# here as a fallback. It no longer has complete coverage of all the links
-# that would be needed in /lib${LIBDIRSUFFIX}, but it covers enough that if
-# we did fall back on this the machine would boot until it reached the boot
-# time call to ldconfig, which would then take care of any missing links.
-# In case there's no ldconfig, make the links manually:
-if [ ! -x /sbin/ldconfig ]; then
-( cd lib ; rm -rf libnss_nis.so.2 )
-( cd lib ; ln -sf libnss_nis-@@VERSION@@.so libnss_nis.so.2 )
-( cd lib ; rm -rf libm.so.6 )
-( cd lib ; ln -sf libm-@@VERSION@@.so libm.so.6 )
-( cd lib ; rm -rf libnss_files.so.2 )
-( cd lib ; ln -sf libnss_files-@@VERSION@@.so libnss_files.so.2 )
-( cd lib ; rm -rf libresolv.so.2 )
-( cd lib ; ln -sf libresolv-@@VERSION@@.so libresolv.so.2 )
-( cd lib ; rm -rf libnsl.so.1 )
-( cd lib ; ln -sf libnsl-@@VERSION@@.so libnsl.so.1 )
-( cd lib ; rm -rf libutil.so.1 )
-( cd lib ; ln -sf libutil-@@VERSION@@.so libutil.so.1 )
-( cd lib ; rm -rf libnss_compat.so.2 )
-( cd lib ; ln -sf libnss_compat-@@VERSION@@.so libnss_compat.so.2 )
-( cd lib ; rm -rf libthread_db.so.1 )
-( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 )
-( cd lib ; rm -rf libnss_hesiod.so.2 )
-( cd lib ; ln -sf libnss_hesiod-@@VERSION@@.so libnss_hesiod.so.2 )
-( cd lib ; rm -rf libanl.so.1 )
-( cd lib ; ln -sf libanl-@@VERSION@@.so libanl.so.1 )
-( cd lib ; rm -rf libcrypt.so.1 )
-( cd lib ; ln -sf libcrypt-@@VERSION@@.so libcrypt.so.1 )
-( cd lib ; rm -rf libBrokenLocale.so.1 )
-( cd lib ; ln -sf libBrokenLocale-@@VERSION@@.so libBrokenLocale.so.1 )
-( cd lib ; rm -rf ld-linux.so.2 )
-( cd lib ; ln -sf ld-@@VERSION@@.so ld-linux.so.2 )
-( cd lib ; rm -rf libdl.so.2 )
-( cd lib ; ln -sf libdl-@@VERSION@@.so libdl.so.2 )
-( cd lib ; rm -rf libnss_dns.so.2 )
-( cd lib ; ln -sf libnss_dns-@@VERSION@@.so libnss_dns.so.2 )
-( cd lib ; rm -rf libpthread.so.0 )
-( cd lib ; ln -sf libpthread-@@VERSION@@.so libpthread.so.0 )
-( cd lib ; rm -rf libnss_nisplus.so.2 )
-( cd lib ; ln -sf libnss_nisplus-@@VERSION@@.so libnss_nisplus.so.2 )
-( cd lib ; rm -rf libc.so.6 )
-( cd lib ; ln -sf libc-@@VERSION@@.so libc.so.6 )
-( cd lib ; rm -rf librt.so.1 )
-( cd lib ; ln -sf librt-@@VERSION@@.so librt.so.1 )
-fi
-
-# More links:
diff --git a/testing/source/glibc/doinst.sh-glibc-solibs b/testing/source/glibc/doinst.sh-glibc-solibs
deleted file mode 100644
index 3d4466043..000000000
--- a/testing/source/glibc/doinst.sh-glibc-solibs
+++ /dev/null
@@ -1,161 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2002, 2005  Slackware Linux, Inc.
-# Copyright 2005, 2006, 2011, 2012, 2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# Swap glibc on the fly.
-#
-# If we're on a running system we have to handle this _very_ carefully.  :-)
-# The tricks involved here get trickier every time...
-
-# OK, now we have to be sure of a few things.  First, you do have a 2.6
-# kernel running, right?
-
-if [ -r /proc/ksyms ]; then
-  echo "FATAL: you need to be running a 2.6.x kernel in order to upgrade"
-  echo "to this version of glibc."
-  echo
-  sleep 999
-  exit 1
-fi
-
-# Next, stop using the /lib/ntpl libraries.  These are now obsolete and
-# will break the installation if present:
-if [ -d lib/tls ]; then
-  mkdir -p lib/obsolete
-  mv lib/tls lib/obsolete
-fi
-if [ -x sbin/ldconfig ]; then
-  sbin/ldconfig -r . 2> /dev/null
-fi
-
-# Install NPTL glibc libraries:
-if [ -x /sbin/ldconfig -a -d lib/incoming ]; then # swap on the fly
-  # Try to protect with flock against another installpkg/removepkg running
-  # ldconfig while we're doing the on-the-fly install:
-  mkdir -p run/lock/pkgtools
-  ( flock 9 || exit 11
-    # First create copies of the incoming libraries:
-    ( cd lib/incoming
-      for file in * ; do
-        if [ ! -r ../${file}.incoming ]; then
-          cp -a $file ../${file}.incoming
-        fi
-      done
-    )
-    # Then switch to them all at once:
-    /sbin/ldconfig -l lib/*.incoming 2> /dev/null
-    # Remove old versions of the glibc libraries. If you really don't want to
-    # do this for some reason, create a file /etc/glibc-nowipe.
-    if [ ! -r etc/glibc-nowipe ]; then
-      ( cd lib
-        for INCOMING in incoming/*-* ; do
-          LIBPREFIX=$(basename $INCOMING | cut -f 1 -d -)
-          for LIBRARY in ${LIBPREFIX}-* ; do
-            # Don't remove the library if it ends in .incoming:
-            if [ "$(echo $LIBRARY | rev | cut -f 1 -d .)" = "gnimocni" ]; then
-              continue
-            fi
-            # Don't remove symlinks:
-            if [ -L $LIBRARY ]; then
-              continue
-            fi
-            rm -f $LIBRARY
-          done
-        done
-      )
-    fi
-    # Finally, rename them and clean up:
-    ( cd lib
-      for file in *.incoming ; do
-        rm -f `basename $file .incoming`
-        cp -a $file `basename $file .incoming`
-        /sbin/ldconfig -l `basename $file .incoming` 2> /dev/null
-        rm -f $file
-      done
-    )
-  ) 9> run/lock/pkgtools/ldconfig.lock
-else # no ldconfig? This is a broken situation, but we will do what we can:
-  ( cd lib/incoming
-    for file in * ; do
-      cp -a $file ..
-    done
-  )
-fi
-# Now, get rid of the temporary directory:
-rm -rf lib/incoming
-# Done installing NPTL glibc libraries.
-
-# Handle config files:
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-config etc/profile.d/glibc.csh.new
-config etc/profile.d/glibc.sh.new
-# Clearly you already decided this issue.  :-)
-rm -f etc/profile.d/glibc.csh.new
-rm -f etc/profile.d/glibc.sh.new
-
-# This block below *should* be dead code, but it's probably safer to leave it
-# here as a fallback. It no longer has complete coverage of all the links
-# that would be needed in /lib${LIBDIRSUFFIX}, but it covers enough that if
-# we did fall back on this the machine would boot until it reached the boot
-# time call to ldconfig, which would then take care of any missing links.
-if [ ! -x /sbin/ldconfig ]; then
-( cd lib ; rm -rf libnss_nis.so.2 )
-( cd lib ; ln -sf libnss_nis-@@VERSION@@.so libnss_nis.so.2 )
-( cd lib ; rm -rf libm.so.6 )
-( cd lib ; ln -sf libm-@@VERSION@@.so libm.so.6 )
-( cd lib ; rm -rf libnss_files.so.2 )
-( cd lib ; ln -sf libnss_files-@@VERSION@@.so libnss_files.so.2 )
-( cd lib ; rm -rf libresolv.so.2 )
-( cd lib ; ln -sf libresolv-@@VERSION@@.so libresolv.so.2 )
-( cd lib ; rm -rf libnsl.so.1 )
-( cd lib ; ln -sf libnsl-@@VERSION@@.so libnsl.so.1 )
-( cd lib ; rm -rf libutil.so.1 )
-( cd lib ; ln -sf libutil-@@VERSION@@.so libutil.so.1 )
-( cd lib ; rm -rf libnss_compat.so.2 )
-( cd lib ; ln -sf libnss_compat-@@VERSION@@.so libnss_compat.so.2 )
-( cd lib ; rm -rf libthread_db.so.1 )
-( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 )
-( cd lib ; rm -rf libnss_hesiod.so.2 )
-( cd lib ; ln -sf libnss_hesiod-@@VERSION@@.so libnss_hesiod.so.2 )
-( cd lib ; rm -rf libanl.so.1 )
-( cd lib ; ln -sf libanl-@@VERSION@@.so libanl.so.1 )
-( cd lib ; rm -rf libcrypt.so.1 )
-( cd lib ; ln -sf libcrypt-@@VERSION@@.so libcrypt.so.1 )
-( cd lib ; rm -rf libBrokenLocale.so.1 )
-( cd lib ; ln -sf libBrokenLocale-@@VERSION@@.so libBrokenLocale.so.1 )
-( cd lib ; rm -rf ld-linux.so.2 )
-( cd lib ; ln -sf ld-@@VERSION@@.so ld-linux.so.2 )
-( cd lib ; rm -rf libdl.so.2 )
-( cd lib ; ln -sf libdl-@@VERSION@@.so libdl.so.2 )
-( cd lib ; rm -rf libnss_dns.so.2 )
-( cd lib ; ln -sf libnss_dns-@@VERSION@@.so libnss_dns.so.2 )
-( cd lib ; rm -rf libpthread.so.0 )
-( cd lib ; ln -sf libpthread-@@VERSION@@.so libpthread.so.0 )
-( cd lib ; rm -rf libnss_nisplus.so.2 )
-( cd lib ; ln -sf libnss_nisplus-@@VERSION@@.so libnss_nisplus.so.2 )
-( cd lib ; rm -rf libc.so.6 )
-( cd lib ; ln -sf libc-@@VERSION@@.so libc.so.6 )
-( cd lib ; rm -rf librt.so.1 )
-( cd lib ; ln -sf librt-@@VERSION@@.so librt.so.1 )
-fi
-
diff --git a/testing/source/glibc/glibc-2.29.en_US.no.am.pm.date.format.diff b/testing/source/glibc/glibc-2.29.en_US.no.am.pm.date.format.diff
deleted file mode 100644
index 0a14ca3b9..000000000
--- a/testing/source/glibc/glibc-2.29.en_US.no.am.pm.date.format.diff
+++ /dev/null
@@ -1,14 +0,0 @@
---- ./localedata/locales/en_US.orig	2019-01-31 10:45:36.000000000 -0600
-+++ ./localedata/locales/en_US	2019-01-31 22:35:02.033009166 -0600
-@@ -118,7 +118,10 @@
- t_fmt_ampm "%I:%M:%S %p"
- %
- % Appropriate date and time representation for date(1)
--date_fmt "%a %d %b %Y %r %Z"
-+% [ Slackware editor's note - no thank you, US users
-+% of UNIX-like systems expect a 24 hour clock, just
-+% like users in the vast majority of other locales. ]
-+%date_fmt "%a %d %b %Y %r %Z"
- %
- % Strings for AM/PM
- %
diff --git a/testing/source/glibc/glibc-c-utf8-locale.patch b/testing/source/glibc/glibc-c-utf8-locale.patch
deleted file mode 100644
index 7fabf303f..000000000
--- a/testing/source/glibc/glibc-c-utf8-locale.patch
+++ /dev/null
@@ -1,270 +0,0 @@
-From 2eda7b462b415105f5a05c1323372d4e39d46439 Mon Sep 17 00:00:00 2001
-From: Mike FABIAN <mfabian@redhat.com>
-Date: Mon, 10 Aug 2015 15:58:12 +0200
-Subject: [PATCH] Add a C.UTF-8 locale
-
----
- localedata/SUPPORTED |   1 +
- localedata/locales/C | 238 +++++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 239 insertions(+)
- create mode 100644 localedata/locales/C
-
-diff --git a/localedata/SUPPORTED b/localedata/SUPPORTED
-index 8ca023e..2a78391 100644
---- a/localedata/SUPPORTED
-+++ b/localedata/SUPPORTED
-@@ -1,6 +1,7 @@
- # This file names the currently supported and somewhat tested locales.
- # If you have any additions please file a glibc bug report.
- SUPPORTED-LOCALES=\
-+C.UTF-8/UTF-8 \
- aa_DJ.UTF-8/UTF-8 \
- aa_DJ/ISO-8859-1 \
- aa_ER/UTF-8 \
-diff --git a/localedata/locales/C b/localedata/locales/C
-new file mode 100644
-index 0000000..fdf460e
---- /dev/null
-+++ b/localedata/locales/C
-@@ -0,0 +1,238 @@
-+escape_char /
-+comment_char %
-+% Locale for C locale in UTF-8
-+
-+LC_IDENTIFICATION
-+title      "C locale"
-+source     ""
-+address    ""
-+contact    ""
-+email      "mfabian@redhat.com"
-+tel        ""
-+fax        ""
-+language   "C"
-+territory  ""
-+revision   "1.0"
-+date       "2015-08-10"
-+%
-+category  "i18n:2012";LC_IDENTIFICATION
-+category  "i18n:2012";LC_CTYPE
-+category  "i18n:2012";LC_COLLATE
-+category  "i18n:2012";LC_TIME
-+category  "i18n:2012";LC_NUMERIC
-+category  "i18n:2012";LC_MONETARY
-+category  "i18n:2012";LC_MESSAGES
-+category  "i18n:2012";LC_PAPER
-+category  "i18n:2012";LC_NAME
-+category  "i18n:2012";LC_ADDRESS
-+category  "i18n:2012";LC_TELEPHONE
-+category  "i18n:2012";LC_MEASUREMENT
-+END LC_IDENTIFICATION
-+
-+LC_CTYPE
-+copy "i18n"
-+
-+translit_start
-+include "translit_combining";""
-+translit_end
-+
-+END LC_CTYPE
-+
-+LC_COLLATE
-+order_start forward
-+<U0000>
-+..
-+<UFFFF>
-+<U10000>
-+..
-+<U1FFFF>
-+<U20000>
-+..
-+<U2FFFF>
-+<UE0000>
-+..
-+<UEFFFF>
-+<UF0000>
-+..
-+<UFFFFF>
-+<U100000>
-+..
-+<U10FFFF>
-+UNDEFINED
-+order_end
-+END LC_COLLATE
-+
-+LC_MONETARY
-+% This is the 14652 i18n fdcc-set definition for
-+% the LC_MONETARY category
-+% (except for the int_curr_symbol and currency_symbol, they are empty in
-+% the 14652 i18n fdcc-set definition and also empty in
-+% glibc/locale/C-monetary.c. But localedef complains in that case).
-+%
-+% Using "USD" for int_curr_symbol. But maybe "XXX" would be better?
-+% XXX is "No currency" (https://en.wikipedia.org/wiki/ISO_4217)
-+int_curr_symbol     "<U0055><U0053><U0044><U0020>"
-+% Using "$" for currency_symbol. But maybe <U00A4> would be better?
-+% U+00A4 is the "generic currency symbol"
-+% (https://en.wikipedia.org/wiki/Currency_sign_%28typography%29)
-+currency_symbol     "<U0024>"
-+mon_decimal_point   "<U002E>"
-+mon_thousands_sep   ""
-+mon_grouping        -1
-+positive_sign       ""
-+negative_sign       "<U002D>"
-+int_frac_digits     -1
-+frac_digits         -1
-+p_cs_precedes       -1
-+int_p_sep_by_space  -1
-+p_sep_by_space      -1
-+n_cs_precedes       -1
-+int_n_sep_by_space  -1
-+n_sep_by_space      -1
-+p_sign_posn         -1
-+n_sign_posn         -1
-+%
-+END LC_MONETARY
-+
-+LC_NUMERIC
-+% This is the POSIX Locale definition for
-+% the LC_NUMERIC category.
-+%
-+decimal_point   "<U002E>"
-+thousands_sep   ""
-+grouping        -1
-+END LC_NUMERIC
-+
-+LC_TIME
-+% This is the POSIX Locale definition for
-+% the LC_TIME category.
-+%
-+% Abbreviated weekday names (%a)
-+abday       "<U0053><U0075><U006E>";"<U004D><U006F><U006E>";/
-+            "<U0054><U0075><U0065>";"<U0057><U0065><U0064>";/
-+            "<U0054><U0068><U0075>";"<U0046><U0072><U0069>";/
-+            "<U0053><U0061><U0074>"
-+
-+% Full weekday names (%A)
-+day         "<U0053><U0075><U006E><U0064><U0061><U0079>";/
-+            "<U004D><U006F><U006E><U0064><U0061><U0079>";/
-+            "<U0054><U0075><U0065><U0073><U0064><U0061><U0079>";/
-+            "<U0057><U0065><U0064><U006E><U0065><U0073><U0064><U0061><U0079>";/
-+            "<U0054><U0068><U0075><U0072><U0073><U0064><U0061><U0079>";/
-+            "<U0046><U0072><U0069><U0064><U0061><U0079>";/
-+            "<U0053><U0061><U0074><U0075><U0072><U0064><U0061><U0079>"
-+
-+% Abbreviated month names (%b)
-+abmon       "<U004A><U0061><U006E>";"<U0046><U0065><U0062>";/
-+            "<U004D><U0061><U0072>";"<U0041><U0070><U0072>";/
-+            "<U004D><U0061><U0079>";"<U004A><U0075><U006E>";/
-+            "<U004A><U0075><U006C>";"<U0041><U0075><U0067>";/
-+            "<U0053><U0065><U0070>";"<U004F><U0063><U0074>";/
-+            "<U004E><U006F><U0076>";"<U0044><U0065><U0063>"
-+
-+% Full month names (%B)
-+mon         "<U004A><U0061><U006E><U0075><U0061><U0072><U0079>";/
-+            "<U0046><U0065><U0062><U0072><U0075><U0061><U0072><U0079>";/
-+            "<U004D><U0061><U0072><U0063><U0068>";/
-+            "<U0041><U0070><U0072><U0069><U006C>";/
-+            "<U004D><U0061><U0079>";/
-+            "<U004A><U0075><U006E><U0065>";/
-+            "<U004A><U0075><U006C><U0079>";/
-+            "<U0041><U0075><U0067><U0075><U0073><U0074>";/
-+            "<U0053><U0065><U0070><U0074><U0065><U006D><U0062><U0065><U0072>";/
-+            "<U004F><U0063><U0074><U006F><U0062><U0065><U0072>";/
-+            "<U004E><U006F><U0076><U0065><U006D><U0062><U0065><U0072>";/
-+            "<U0044><U0065><U0063><U0065><U006D><U0062><U0065><U0072>"
-+
-+% Week description, consists of three fields:
-+% 1. Number of days in a week.
-+% 2. Gregorian date that is a first weekday (19971130 for Sunday, 19971201 for Monday).
-+% 3. The weekday number to be contained in the first week of the year.
-+%
-+% ISO 8601 conforming applications should use the values 7, 19971201 (a
-+% Monday), and 4 (Thursday), respectively.
-+week    7;19971201;4
-+first_weekday	1
-+first_workday	1
-+
-+% Appropriate date and time representation (%c)
-+%	"%a %b %e %H:%M:%S %Y"
-+d_t_fmt "<U0025><U0061><U0020><U0025><U0062><U0020><U0025><U0065><U0020><U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U0059>"
-+
-+% Appropriate date representation (%x)
-+%	"%m/%d/%y"
-+d_fmt   "<U0025><U006D><U002F><U0025><U0064><U002F><U0025><U0079>"
-+
-+% Appropriate time representation (%X)
-+%	"%H:%M:%S"
-+t_fmt   "<U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053>"
-+
-+% Appropriate AM/PM time representation (%r)
-+%	"%I:%M:%S %p"
-+t_fmt_ampm "<U0025><U0049><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U0070>"
-+
-+% Equivalent of AM/PM (%p)      "AM"/"PM"
-+%
-+am_pm	"<U0041><U004D>";"<U0050><U004D>"
-+
-+% Appropriate date representation (date(1))   "%a %b %e %H:%M:%S %Z %Y"
-+date_fmt	"<U0025><U0061><U0020><U0025><U0062><U0020><U0025><U0065><U0020><U0025><U0048><U003A><U0025><U004D><U003A><U0025><U0053><U0020><U0025><U005A><U0020><U0025><U0059>"
-+END LC_TIME
-+
-+LC_MESSAGES
-+% This is the POSIX Locale definition for
-+% the LC_NUMERIC category.
-+%
-+yesexpr "<U005E><U005B><U0079><U0059><U005D>"
-+noexpr  "<U005E><U005B><U006E><U004E><U005D>"
-+yesstr  "<U0059><U0065><U0073>"
-+nostr   "<U004E><U006F>"
-+END LC_MESSAGES
-+
-+LC_PAPER
-+% This is the ISO/IEC 14652 "i18n" definition for
-+% the LC_PAPER category.
-+% (A4 paper, this is also used in the built in C/POSIX
-+% locale in glibc/locale/C-paper.c)
-+height   297
-+width    210
-+END LC_PAPER
-+
-+LC_NAME
-+% This is the ISO/IEC 14652 "i18n" definition for
-+% the LC_NAME category.
-+% "%p%t%g%t%m%t%f"
-+% (also used in the built in C/POSIX locale in glibc/locale/C-name.c)
-+name_fmt    "<U0025><U0070><U0025><U0074><U0025><U0067><U0025><U0074>/
-+<U0025><U006D><U0025><U0074><U0025><U0066>"
-+END LC_NAME
-+
-+LC_ADDRESS
-+% This is the ISO/IEC 14652 "i18n" definition for
-+% the LC_ADDRESS category.
-+% "%a%N%f%N%d%N%b%N%s %h %e %r%N%C-%z %T%N%c%N"
-+% (also used in the built in C/POSIX locale in glibc/locale/C-address.c)
-+postal_fmt    "<U0025><U0061><U0025><U004E><U0025><U0066><U0025><U004E>/
-+<U0025><U0064><U0025><U004E><U0025><U0062><U0025><U004E><U0025><U0073>/
-+<U0020><U0025><U0068><U0020><U0025><U0065><U0020><U0025><U0072><U0025>/
-+<U004E><U0025><U0043><U002D><U0025><U007A><U0020><U0025><U0054><U0025>/
-+<U004E><U0025><U0063><U0025><U004E>"
-+END LC_ADDRESS
-+
-+LC_TELEPHONE
-+% This is the ISO/IEC 14652 "i18n" definition for
-+% the LC_TELEPHONE category.
-+% "+%c %a %l"
-+tel_int_fmt    "<U002B><U0025><U0063><U0020><U0025><U0061><U0020><U0025>/
-+<U006C>"
-+% (also used in the built in C/POSIX locale in glibc/locale/C-telephone.c)
-+END LC_TELEPHONE
-+
-+LC_MEASUREMENT
-+% This is the ISO/IEC 14652 "i18n" definition for
-+% the LC_MEASUREMENT category.
-+% (same as in the built in C/POSIX locale in glibc/locale/C-measurement.c)
-+%metric
-+measurement    1
-+END LC_MEASUREMENT
-+
--- 
-2.4.3
-
diff --git a/testing/source/glibc/glibc-cvs-checkout.sh b/testing/source/glibc/glibc-cvs-checkout.sh
deleted file mode 100755
index 022d0117b..000000000
--- a/testing/source/glibc/glibc-cvs-checkout.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-echo "The password below is \"anoncvs\":"
-cvs -z 9 -d :pserver:anoncvs@sources.redhat.com:/cvs/glibc login
-cvs -z 9 -d :pserver:anoncvs@sources.redhat.com:/cvs/glibc co libc
diff --git a/testing/source/glibc/glibc.SlackBuild b/testing/source/glibc/glibc.SlackBuild
deleted file mode 100755
index fbe08804c..000000000
--- a/testing/source/glibc/glibc.SlackBuild
+++ /dev/null
@@ -1,467 +0,0 @@
-#!/bin/bash
-
-# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-cd $(dirname $0) ; CWD=$(pwd)
-
-PKGNAM=glibc
-VERSION=${VERSION:-$(echo glibc-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-CHECKOUT=${CHECKOUT:-""}
-BUILD=${BUILD:-1}
-
-# I was considering disabling NSCD, but MoZes talked me out of it.  :)
-#DISABLE_NSCD=" --disable-nscd "
-
-# $ARCH may be preset, otherwise i586 compatibility with i686 binary
-# structuring is the Slackware default.
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
-# the name of the created package would be, and then exit. This information
-# could be useful to other scripts.
-if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
-  echo "glibc-$VERSION-$ARCH-$BUILD.txz"
-  echo "glibc-i18n-$VERSION-$ARCH-$BUILD.txz"
-  echo "glibc-profile-$VERSION-$ARCH-$BUILD.txz"
-  echo "glibc-solibs-$VERSION-$ARCH-$BUILD.txz"
-  exit 0
-fi
-
-NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
-
-# Work around -Werror failure with gcc-8.2.0.
-# NOTE: Until the next glibc release takes care of this issue, this will
-# likely need to be updated with every new gcc release's version. Yes, we
-# could pass --disable-werror by default, but I'd rather not just shove a
-# stick in it like that.
-if [ "$(gcc -dumpversion)" = "8.2.0" ]; then
-  if [ "$VERSION" = "2.27" ]; then
-    WERROR="--disable-werror"
-  fi
-fi
-
-# I'll break this out as an option for fun  :-)
-case $ARCH  in
-  i386)
-    OPTIMIZ="-O3 -march=i386 -mcpu=i686"
-    LIBDIRSUFFIX=""
-    ;;
-  i486)
-    OPTIMIZ="-O3 -march=i486 -mtune=i686"
-    LIBDIRSUFFIX=""
-    ;;
-  i586)
-    OPTIMIZ="-O3 -march=i586 -mtune=i686"
-    LIBDIRSUFFIX=""
-    ;;
-  i686)
-    OPTIMIZ="-O3 -march=i686"
-    LIBDIRSUFFIX=""
-    ;;
-  athlon)
-    OPTIMIZ="-O3 -march=athlon"
-    LIBDIRSUFFIX=""
-    ;;
-  s390)
-    OPTIMIZ="-O3"
-    LIBDIRSUFFIX=""
-    ;;
-  x86_64)
-    OPTIMIZ="-O3 -fPIC"
-    LIBDIRSUFFIX="64"
-    ;;
-  *)
-    OPTIMIZ="-O3"
-    LIBDIRSUFFIX=""
-    ;;
-esac
-
-case $ARCH in
-  x86_64)
-    TARGET=${TARGET:-x86_64}
-    ;;
-  i586)
-    # This should be i586 for all 32-bit x86 arch:
-    TARGET=${TARGET:-i586}
-    ;;
-esac
-
-# Hand off the $ARCH variable to $SLACKWARE_ARCH to avoid confusing glibc:
-SLACKWARE_ARCH=$ARCH
-unset ARCH
-
-CVSVER=${VERSION}${CHECKOUT}
-
-# NOTE!!!  glibc needs to be built against the sanitized kernel headers,
-# which will be installed under /usr/include by the kernel-headers package.
-# Be sure the correct version of the headers package is installed BEFORE
-# building glibc!
-
-TMP=${TMP:-/tmp}
-mkdir -p $TMP
-
-# This function fixes a doinst.sh file for x86_64.
-# With thanks to Fred Emmott.
-fix_doinst() {
-  if [ "x$LIBDIRSUFFIX" = "x" ]; then
-    return;
-  fi;
-  # Fix "( cd usr/lib ;" occurrences
-  sed -i "s#lib ;#lib${LIBDIRSUFFIX} ;#" install/doinst.sh
-  # Fix "lib/" occurrences
-  sed -i "s#lib/#lib${LIBDIRSUFFIX}/#g" install/doinst.sh
-  # Fix "( cd lib" occurrences
-  sed -i "s#( cd lib\$#( cd lib${LIBDIRSUFFIX}#" install/doinst.sh
-
-  if [ "$SLACKWARE_ARCH" = "x86_64" ]; then
-    sed -i 's#ld-linux.so.2#ld-linux-x86-64.so.2#' install/doinst.sh
-  fi
-}
-
-# This is a patch function to put all glibc patches in the build script
-# up near the top.
-apply_patches() {
-  # Use old-style locale directories rather than a single (and strangely
-  # formatted) /usr/lib/locale/locale-archive file:
-  zcat $CWD/glibc.locale.no-archive.diff.gz | patch -p1 --verbose || exit 1
-  # Support ru_RU.CP1251 locale:
-  zcat $CWD/glibc.ru_RU.CP1251.diff.gz | patch -p1 --verbose || exit 1
-  # Add a C.UTF-8 locale:
-  zcat $CWD/glibc-c-utf8-locale.patch.gz | patch -p1 --verbose || exit 1
-  # Don't use AM/PM format for date(1). That's just plain crazy.
-  zcat $CWD/glibc-2.29.en_US.no.am.pm.date.format.diff.gz | patch -p1 --verbose || exit 1
-  # Other regression fixes from git:
-  for git_patch in $CWD/patches/*.patch.gz ; do
-    zcat $git_patch | patch -p1 --verbose || exit 1
-  done
-}
-
-# This is going to be the initial $DESTDIR:
-export PKG=$TMP/package-glibc-incoming-tree
-PGLIBC=$TMP/package-glibc
-PSOLIBS=$TMP/package-glibc-solibs
-PI18N=$TMP/package-glibc-i18n
-PPROFILE=$TMP/package-glibc-profile
-PDEBUG=$TMP/package-glibc-debug
-
-# Empty these locations first:
-for dir in $PKG $PGLIBC $PSOLIBS $PZONE $PI18N $PPROFILE $PDEBUG ; do
-  if [ -d $dir ]; then
-    rm -rf $dir
-  fi
-  mkdir -p $dir
-done
-if [ -d $TMP/glibc-$VERSION ]; then
-  rm -rf $TMP/glibc-$VERSION
-fi
-
-# Create an incoming directory structure for glibc to be built into:
-mkdir -p $PKG/lib${LIBDIRSUFFIX}
-mkdir -p $PKG/sbin
-mkdir -p $PKG/usr/bin
-mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
-mkdir -p $PKG/usr/sbin
-mkdir -p $PKG/usr/include
-mkdir -p $PKG/usr/doc
-mkdir -p $PKG/usr/man
-mkdir -p $PKG/usr/share
-mkdir -p $PKG/var/db/nscd
-mkdir -p $PKG/var/run/nscd
-
-# Begin extract/compile:
-cd $TMP
-rm -rf glibc-$CVSVER
-tar xvf $CWD/glibc-$CVSVER.tar.xz \
-  || tar xvf $CWD/glibc-$CVSVER.tar.lz \
-  || tar xvf $CWD/glibc-$CVSVER.tar.bz2 \
-  || tar xvf $CWD/glibc-$CVSVER.tar.gz
-cd glibc-$CVSVER
-
-# Apply patches; exit if any fail.
-apply_patches
-if [ ! $? = 0 ]; then
-  exit 1
-fi
-
-# Clean up leftover CVS directories:
-find . -type d -name CVS -exec rm -r {} \+ 2> /dev/null
-
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \+ -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \+
-
-# Make build directory:
-mkdir build-glibc-$VERSION
-cd build-glibc-$VERSION || exit 1
-
-echo "BUILDING DAS NPTL GLIBC"
-CFLAGS="-g $OPTIMIZ" \
-../configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --enable-kernel=2.6.32 \
-  --with-headers=/usr/include \
-  --enable-add-ons \
-  --enable-obsolete-nsl \
-  --enable-obsolete-rpc \
-  --enable-profile \
-  $DISABLE_NSCD \
-  $WERROR \
-  --infodir=/usr/info \
-  --mandir=/usr/man \
-  --with-tls \
-  --with-__thread \
-  --without-cvs \
-  $TARGET-slackware-linux
-
-make $NUMJOBS || exit 1
-make $NUMJOBS install install_root=$PKG || exit 1
-# Don't use this, as it makes the i18n package WAY bigger:
-#make localedata/install-locale-files DESTDIR=$PKG || exit 1
-# This is ugly run in parallel, and seems to hang at the end. But it actually
-# completes much faster. :)
-make $NUMJOBS localedata/install-locales install_root=$PKG DESTDIR=$PKG || exit 1
-
-# We've always had an sln symlink in /bin, so let's make sure it
-# remains there so as not to break any scripts that might need it:
-mkdir -p $PKG/bin
-( cd $PKG/bin ; ln -sf /sbin/sln sln )
-
-# This bit was mostly copped from Fedora Rawhide's .spec file. I'm not
-# entirely sure how important it is, since I'm not aware of anything
-# we ship trying to link libpthread as static. What it does is make sure
-# that anything linking libpthread static includes all of the functions
-# so that the resulting binary doesn't rely on parts of the library that
-# were not linked in. Optimizing actually working over binary size, so
-# to speak.
-( cd $PKG/usr/lib${LIBDIRSUFFIX}
-  gcc -r -nostdlib -o libpthread.o -Wl,--whole-archive ./libpthread.a
-  rm libpthread.a
-  ar rcs libpthread.a libpthread.o
-  rm libpthread.o
-)
-
-# The prevailing standard seems to be putting unstripped libraries in
-# /usr/lib/debug/ and stripping the debugging symbols from all the other
-# libraries.
-mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/debug
-cp -a $PKG/lib${LIBDIRSUFFIX}/l*.so* $PKG/usr/lib${LIBDIRSUFFIX}/debug
-cp -a $PKG/usr/lib${LIBDIRSUFFIX}/*.a $PKG/usr/lib${LIBDIRSUFFIX}/debug
-# Don't need debug+profile:
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/debug ; rm -f *_p.* )
-# NOTE:  Is there really a reason for the glibc-debug package?
-# If you're debugging glibc, you can also compile it, right?
-
-## COMMENTED OUT:  There's no reason for profile libs to include -g information.
-## Put back unstripped profiling libraries:
-#mv $PKG/usr/lib${LIBDIRSUFFIX}/debug/*_p.a $PKG/usr/lib${LIBDIRSUFFIX}
-# It might be best to put the unstripped and profiling libraries in glibc-debug and glibc-profile.
-
-# I don't think "strip -g" causes the pthread problems.  It's --strip-unneeded that does.
-strip -g $PKG/lib${LIBDIRSUFFIX}/l*.so*
-strip -g $PKG/usr/lib${LIBDIRSUFFIX}/l*.so*
-strip -g $PKG/usr/lib${LIBDIRSUFFIX}/lib*.a
-
-# Remove the rquota.x and rquota.h include files, as they are provided by
-# the quota package:
-rm -f $PKG/usr/include/rpcsvc/rquota.{h,x}
-
-# Back to the sources dir to add some files/docs:
-cd $TMP/glibc-$CVSVER
-
-# We'll automatically install the config file for the Name Server Cache Daemon.
-# Perhaps this should also have some commented-out startup code in rc.inet2...
-mkdir -p $PKG/etc
-cat nscd/nscd.conf > $PKG/etc/nscd.conf.new
-
-# Install docs:
-( mkdir -p $PKG/usr/doc/glibc-$VERSION
-  cp -a \
-    BUGS CONFORMANCE COPYING* FAQ INSTALL LICENSES NAMESPACE \
-    NEWS NOTES PROJECTS README* \
-    $PKG/usr/doc/glibc-$VERSION
-)
-
-# Trim the NEWS file to omit ancient history:
-if [ -r NEWS ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/glibc-$VERSION)
-  cat NEWS | head -n 1000 > $DOCSDIR/NEWS
-  touch -r NEWS $DOCSDIR/NEWS
-fi
-
-# OK, there are some very old Linux standards that say that any binaries in a /bin or
-# /sbin directory (and the directories themselves) should be group bin rather than
-# group root, unless a specific group is really needed for some reason.
-#
-# I can't find any mention of this in more recent standards docs, and always thought
-# that it was pretty cosmetic anyway (hey, if there's a reason -- fill me in!), so
-# it's possible that this ownership change won't be followed in the near future
-# (it's a PITA, and causes many bug reports when the perms change is occasionally
-# forgotten).
-#
-# But, it's hard to get me to break old habits, so we'll continue the tradition here:
-#
-# No, no we won't.  You know how we love to break traditions.
-
-# Strip most binaries:
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
-)
-
-# Fix info dir:
-rm $PKG/usr/info/dir
-gzip -9 $PKG/usr/info/*
-
-# This is junk
-rm $PKG/etc/ld.so.cache
-( cd $PKG
-  find . -name "*.orig" -exec rm {} \+
-)
-
-##################################
-# OK, time to make some packages #
-##################################
-
-# glibc-profile:
-cd $PPROFILE
-mkdir -p usr/lib${LIBDIRSUFFIX}
-# Might as well just grab these with 'mv' to simplify things later:
-mv $PKG/usr/lib${LIBDIRSUFFIX}/lib*_p.a usr/lib${LIBDIRSUFFIX}
-# Profile libs should be stripped.  Use the debug libs to debug...
-( cd usr/lib${LIBDIRSUFFIX} ; strip -g *.a )
-mkdir install
-cp -a $CWD/slack-desc.glibc-profile install/slack-desc
-makepkg -l y -c n $TMP/glibc-profile-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
-
-# THIS IS NO LONGER PACKAGED (or is it?  might be better to let it be made, and then ship it or not...)
-# glibc-debug:
-cd $PDEBUG
-mkdir -p usr/lib${LIBDIRSUFFIX}
-# Might as well just grab these with 'mv' to simplify things later:
-mv $PKG/usr/lib${LIBDIRSUFFIX}/debug usr/lib${LIBDIRSUFFIX}
-mkdir install
-cp -a $CWD/slack-desc.glibc-debug install/slack-desc
-## Don't package this:
-#makepkg -l y -c n $TMP/glibc-debug-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
-## INSTEAD, NUKE THESE LIBS
-#rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/debug
-
-# glibc-i18n:
-cd $PI18N
-mkdir -p usr/lib${LIBDIRSUFFIX}/locale
-mv $PKG/usr/lib${LIBDIRSUFFIX}/locale/* usr/lib${LIBDIRSUFFIX}/locale
-mkdir -p usr/share/{i18n,locale}
-mv $PKG/usr/share/i18n/* usr/share/i18n
-mv $PKG/usr/share/locale/* usr/share/locale
-# Leave copies of the C, POSIX, and en_US locales in the main glibc package:
-cp -a usr/lib${LIBDIRSUFFIX}/locale/{C,en_US}* $PKG/usr/lib${LIBDIRSUFFIX}/locale
-mkdir -p $PKG/usr/share/i18n/locales
-cp -a usr/share/i18n/locales/{C,POSIX,en_US} $PKG/usr/share/i18n/locales
-mkdir install
-cp -a $CWD/slack-desc.glibc-i18n install/slack-desc
-makepkg -l y -c n $TMP/glibc-i18n-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
-
-# glibc-solibs:
-cd $PSOLIBS
-mkdir -p etc/profile.d
-cp -a $CWD/profile.d/* etc/profile.d
-chown -R root:root etc
-chmod 755 etc/profile.d/*
-mkdir -p lib${LIBDIRSUFFIX}
-cp -a $PKG/lib${LIBDIRSUFFIX}/* lib${LIBDIRSUFFIX}
-( cd lib${LIBDIRSUFFIX}
-  mkdir incoming
-  mv *so* incoming
-  mv incoming/libSegFault.so .
-)
-mkdir -p usr
-cp -a $PKG/usr/bin usr
-mv usr/bin/ldd .
-rm usr/bin/*
-mv ldd usr/bin
-mkdir -p usr/lib${LIBDIRSUFFIX}
-# The gconv directory has a lot of stuff, but including it here will save some problems.
-# Seems standard elsewhere.
-cp -a $PKG/usr/lib${LIBDIRSUFFIX}/gconv usr/lib${LIBDIRSUFFIX}
-mkdir -p usr/libexec
-cp -a $PKG/usr/libexec/pt_chown usr/libexec
-# Same usr.bin deal:
-cp -a $PKG/sbin .
-mv sbin/ldconfig .
-rm sbin/*
-mv ldconfig sbin
-mkdir install
-cp -a $CWD/slack-desc.glibc-solibs install/slack-desc
-cp -a $CWD/doinst.sh-glibc-solibs install/doinst.sh
-# Fix specific versioning for the symlink creation script. This part of the
-# script would only be used in the case where there is no ldconfig on the
-# running system that's used to install the package. That should never be the
-# case, but we'll leave the code in place anyway just in case.
-sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh
-# Call the function to fix doinst.sh where $LIBDIRSUFFIX is needed:
-fix_doinst
-# Only scrub the links in /lib{,64} that will be created by ldconfig:
-find lib${LIBDIRSUFFIX} -type l -exec rm {} \+
-# Build the package:
-makepkg -l y -c n $TMP/glibc-solibs-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
-
-# And finally, the complete "all-in-one" glibc package is created
-# from whatever was leftover:
-cd $PGLIBC
-mv $PKG/* .
-mkdir -p etc/profile.d
-cp -a $CWD/profile.d/* etc/profile.d
-chown -R root:root etc
-chmod 755 etc/profile.d/*
-# Only scrub the links in /lib{,64} that will be created by ldconfig:
-find lib${LIBDIRSUFFIX} -type l -exec rm {} \+
-mkdir install
-cp -a $CWD/slack-desc.glibc install/slack-desc
-cp -a $CWD/doinst.sh-glibc install/doinst.sh
-# Fix specific versioning for the symlink creation script. This part of the
-# script would only be used in the case where there is no ldconfig on the
-# running system that's used to install the package. That should never be the
-# case, but we'll leave the code in place anyway just in case.
-sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh
-# Call the function to fix doinst.sh where $LIBDIRSUFFIX is needed:
-fix_doinst
-( cd lib${LIBDIRSUFFIX}
-  mkdir incoming
-  mv *so* incoming
-  mv incoming/libSegFault.so .
-)
-# Build the package:
-/sbin/makepkg -l y -c n $TMP/glibc-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
-
-# Done!
-echo
-echo "glibc packages built in $TMP!"
diff --git a/testing/source/glibc/glibc.locale.no-archive.diff b/testing/source/glibc/glibc.locale.no-archive.diff
deleted file mode 100644
index 173bafc72..000000000
--- a/testing/source/glibc/glibc.locale.no-archive.diff
+++ /dev/null
@@ -1,10 +0,0 @@
---- ./localedata/Makefile.orig	2019-02-16 14:05:01.794154302 -0600
-+++ ./localedata/Makefile	2019-02-16 14:06:25.744146460 -0600
-@@ -413,6 +413,7 @@
- 	echo -n '...'; \
- 	input=`echo $$locale | sed 's/\([^.]*\)[^@]*\(.*\)/\1\2/'`; \
- 	$(LOCALEDEF) $$flags --alias-file=../intl/locale.alias \
-+		     --no-archive \
- 		     -i locales/$$input -f charmaps/$$charset \
- 		     $(addprefix --prefix=,$(install_root)) $$locale \
- 	&& echo ' done';
diff --git a/testing/source/glibc/glibc.ru_RU.CP1251.diff b/testing/source/glibc/glibc.ru_RU.CP1251.diff
deleted file mode 100644
index 376cf76a7..000000000
--- a/testing/source/glibc/glibc.ru_RU.CP1251.diff
+++ /dev/null
@@ -1,10 +0,0 @@
---- ./localedata/SUPPORTED.orig	2005-07-17 20:50:35.000000000 -0500
-+++ ./localedata/SUPPORTED	2006-08-22 01:33:09.000000000 -0500
-@@ -270,6 +270,7 @@
- ro_RO/ISO-8859-2 \
- ru_RU.KOI8-R/KOI8-R \
- ru_RU.UTF-8/UTF-8 \
-+ru_RU.CP1251/CP1251 \
- ru_RU/ISO-8859-5 \
- ru_UA.UTF-8/UTF-8 \
- ru_UA/KOI8-U \
diff --git a/testing/source/glibc/profile.d/glibc.csh.new b/testing/source/glibc/profile.d/glibc.csh.new
deleted file mode 100755
index 1f33e9663..000000000
--- a/testing/source/glibc/profile.d/glibc.csh.new
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/csh
-# Set more relaxed (glibc-2.3.5 like) malloc() checking.
-#
-# This relaxes the default paranoia level so that it reports
-# bugs, but does not kill the questionable process.  You can
-# get away with running broken programs with this setting,
-# but at a possible performance and security cost.
-#
-#setenv MALLOC_CHECK_ 1
diff --git a/testing/source/glibc/profile.d/glibc.sh.new b/testing/source/glibc/profile.d/glibc.sh.new
deleted file mode 100755
index 979f4879e..000000000
--- a/testing/source/glibc/profile.d/glibc.sh.new
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-# Set more relaxed (glibc-2.3.5 like) malloc() checking.
-#
-# This relaxes the default paranoia level so that it reports
-# bugs, but does not kill the questionable process.  You can
-# get away with running broken programs with this setting,
-# but at a possible performance and security cost.
-#export MALLOC_CHECK_=1
diff --git a/testing/source/glibc/slack-desc.glibc b/testing/source/glibc/slack-desc.glibc
deleted file mode 100644
index 63992d6b4..000000000
--- a/testing/source/glibc/slack-desc.glibc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in. You must make
-# exactly 11 lines for the formatting to be correct. It's also customary to
-# leave one space after the ':'.
-
-     |-----handy-ruler------------------------------------------------------|
-glibc: glibc (GNU C libraries)
-glibc:
-glibc: This package contains the GNU C libraries and header files. You'll
-glibc: need this package to compile programs.
-glibc:
-glibc: The GNU C library was originally authored by Roland McGrath.
-glibc:
-glibc: Homepage: https://www.gnu.org/software/libc/
-glibc:
-glibc:
-glibc:
diff --git a/testing/source/glibc/slack-desc.glibc-debug b/testing/source/glibc/slack-desc.glibc-debug
deleted file mode 100644
index 8cb64d59a..000000000
--- a/testing/source/glibc/slack-desc.glibc-debug
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in. You must make
-# exactly 11 lines for the formatting to be correct. It's also customary to
-# leave one space after the ':'.
-
-           |-----handy-ruler------------------------------------------------------|
-glibc-debug: glibc-debug (GNU C libraries with debugging symbols)
-glibc-debug:
-glibc-debug: This package contains versions of the GNU C libraries with debugging
-glibc-debug: information. These are needed only if you wish to be able to step
-glibc-debug: through C library routines while debugging programs. Most debugging
-glibc-debug: efforts will not require these.
-glibc-debug: To use these libraries, set LD_LIBRARY_PATH when calling the debugger:
-glibc-debug:  LD_LIBRARY_PATH=/usr/lib/debug gdb <executable>
-glibc-debug:
-glibc-debug: Or, use this approach if you need to debug a setuid binary:
-glibc-debug:  su user -c "LD_LIBRARY_PATH=/usr/lib/debug gdb <executable>"
diff --git a/testing/source/glibc/slack-desc.glibc-i18n b/testing/source/glibc/slack-desc.glibc-i18n
deleted file mode 100644
index a697bc3db..000000000
--- a/testing/source/glibc/slack-desc.glibc-i18n
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in. You must make
-# exactly 11 lines for the formatting to be correct. It's also customary to
-# leave one space after the ':'.
-
-          |-----handy-ruler------------------------------------------------------|
-glibc-i18n: glibc-i18n (locale files from glibc)
-glibc-i18n:
-glibc-i18n: These files go in /usr/lib/locale, /usr/share/i18n/, and
-glibc-i18n: /usr/share/locale/ to provide internationalization support.
-glibc-i18n: You'll need this package unless you will be using US English only.
-glibc-i18n:
-glibc-i18n:
-glibc-i18n:
-glibc-i18n:
-glibc-i18n:
-glibc-i18n:
diff --git a/testing/source/glibc/slack-desc.glibc-profile b/testing/source/glibc/slack-desc.glibc-profile
deleted file mode 100644
index 4b4100e08..000000000
--- a/testing/source/glibc/slack-desc.glibc-profile
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in. You must make
-# exactly 11 lines for the formatting to be correct. It's also customary to
-# leave one space after the ':'.
-
-             |-----handy-ruler------------------------------------------------------|
-glibc-profile: glibc-profile (GNU C libraries with profiling support)
-glibc-profile:
-glibc-profile: This package contains static versions of the GNU C libraries with 
-glibc-profile: support for profiling binaries using gprof. gprof calculates how
-glibc-profile: much time a program spends in each routine which can suggest where
-glibc-profile: to concentrate efforts to improve performance.
-glibc-profile:
-glibc-profile: See the gprof man page for more details.
-glibc-profile:
-glibc-profile:
-glibc-profile:
diff --git a/testing/source/glibc/slack-desc.glibc-solibs b/testing/source/glibc/slack-desc.glibc-solibs
deleted file mode 100644
index a538452f7..000000000
--- a/testing/source/glibc/slack-desc.glibc-solibs
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in. You must make
-# exactly 11 lines for the formatting to be correct. It's also customary to
-# leave one space after the ':'.
-
-            |-----handy-ruler------------------------------------------------------|
-glibc-solibs: glibc-solibs (shared GNU C libraries)
-glibc-solibs:
-glibc-solibs: This package contains the shared libraries, binaries, and support
-glibc-solibs: files required to run most Linux applications linked with glibc.
-glibc-solibs:
-glibc-solibs:
-glibc-solibs:
-glibc-solibs:
-glibc-solibs:
-glibc-solibs:
-glibc-solibs: