Fri Jan 1 22:45:48 UTC 202120210101224548

a/exfatprogs-1.0.4-x86_64-1.txz:  Added.
ap/vim-8.2.2269-x86_64-1.txz:  Upgraded.
  Add Ruby and Tcl support, make language support dynamic if possible.
d/ruby-3.0.0-x86_64-1.txz:  Upgraded.
  Shared library .so-version bump.
d/subversion-1.14.0-x86_64-4.txz:  Rebuilt.
  Recompiled against ruby-3.0.0.
l/openexr-2.5.4-x86_64-1.txz:  Upgraded.
l/python-idna-3.0-x86_64-1.txz:  Upgraded.
n/cifs-utils-6.12-x86_64-1.txz:  Upgraded.
n/epic5-2.1.2-x86_64-5.txz:  Rebuilt.
  Recompiled against ruby-3.0.0.
x/marisa-0.2.6-x86_64-2.txz:  Rebuilt.
  Recompiled against ruby-3.0.0.
xap/vim-gvim-8.2.2269-x86_64-1.txz:  Upgraded.
  Add Ruby and Tcl support, make language support dynamic if possible.

12 files changed, 182 insertions, 126 deletions

diff --git a/source/a/exfatprogs/exfatprogs.SlackBuild b/source/a/exfatprogs/exfatprogs.SlackBuild
new file mode 100755
index 000000000..f8390aa2e
--- /dev/null
+++ b/source/a/exfatprogs/exfatprogs.SlackBuild
@@ -0,0 +1,135 @@
+#!/bin/bash
+
+# Copyright 2021  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=exfatprogs
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sbindir=/sbin \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --disable-static \
+  --build=$ARCH-slackware-linux || exit 1
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS* COPYING* LICENSE* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/exfatprogs/exfatprogs.url b/source/a/exfatprogs/exfatprogs.url
new file mode 100644
index 000000000..010b62738
--- /dev/null
+++ b/source/a/exfatprogs/exfatprogs.url
@@ -0,0 +1 @@
+https://github.com/exfatprogs/exfatprogs
diff --git a/source/a/exfatprogs/slack-desc b/source/a/exfatprogs/slack-desc
new file mode 100644
index 000000000..73318c5dc
--- /dev/null
+++ b/source/a/exfatprogs/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+exfatprogs: exfatprogs (exFAT filesystem utilities)
+exfatprogs:
+exfatprogs: The exfatprogs package contains all of the standard utilities for
+exfatprogs: creating, fixing, and debugging exFAT filesystems. The goal of
+exfatprogs: exfatprogs is to provide high performance and quality at the level of
+exfatprogs: exFAT exfat utilities in windows.
+exfatprogs:
+exfatprogs: Homepage: https://github.com/exfatprogs/exfatprogs
+exfatprogs:
+exfatprogs:
+exfatprogs:
diff --git a/source/ap/vim/vim-gvim.SlackBuild b/source/ap/vim/vim-gvim.SlackBuild
index 5bc65fc77..8091411e8 100755
--- a/source/ap/vim/vim-gvim.SlackBuild
+++ b/source/ap/vim/vim-gvim.SlackBuild
@@ -52,6 +52,11 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
+# If dynamic support for Ruby works with this $ARCH, then allow it:
+if [ "$ARCH" = "x86_64" ]; then
+  RUBYDYNAMIC="=dynamic"
+fi
+
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 PYVER=$(python -V 2>&1 | cut -f 2 -d' ' | cut -f 1-2 -d.)
@@ -80,21 +85,18 @@ CFLAGS="$SLKCFLAGS" LDFLAGS="$SLKLDFLAGS" \
 ./configure \
   $* \
   --prefix=/usr \
-  --enable-pythoninterp \
   --with-python-config-dir=/usr/lib${LIBDIRSUFFIX}/python$PYVER/config \
-  --enable-python3interp \
   --with-python3-config-dir=$(python3-config --configdir) \
-  --enable-perlinterp \
-  --disable-tclinterp \
+  --enable-perlinterp=dynamic \
+  --enable-pythoninterp=dynamic \
+  --enable-python3interp=dynamic \
+  --enable-rubyinterp${RUBYDYNAMIC} \
+  --enable-tclinterp=dynamic \
   --enable-multibyte \
   --enable-cscope \
   --with-features=huge \
   --with-compiledby="<volkerdi@slackware.com>" \
   --build=$ARCH-slackware-linux || exit 1
-
-  # I had been adding this, but got 100% complaints and 0% kudos:
-  #  --enable-rubyinterp
-
 }
 
 cd $TMP/vim-$VERSION || exit 1
diff --git a/source/ap/vim/vim.SlackBuild b/source/ap/vim/vim.SlackBuild
index 1e9cdd0ae..1ef6744bb 100755
--- a/source/ap/vim/vim.SlackBuild
+++ b/source/ap/vim/vim.SlackBuild
@@ -60,6 +60,11 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
+# If dynamic support for Ruby works with this $ARCH, then allow it:
+if [ "$ARCH" = "x86_64" ]; then
+  RUBYDYNAMIC="=dynamic"
+fi
+
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
 PYVER=$(python -V 2>&1 | cut -f 2 -d' ' | cut -f 1-2 -d.)
@@ -116,21 +121,19 @@ CFLAGS="$SLKCFLAGS" \
 ./configure \
   $* \
   --prefix=/usr \
-  --enable-pythoninterp \
   --with-python-config-dir=/usr/lib${LIBDIRSUFFIX}/python$PYVER/config \
-  --enable-python3interp \
   --with-python3-config-dir=$(python3-config --configdir) \
-  --enable-perlinterp \
+  --enable-perlinterp=dynamic \
+  --enable-pythoninterp=dynamic \
+  --enable-python3interp=dynamic \
+  --enable-rubyinterp${RUBYDYNAMIC} \
+  --enable-tclinterp=dynamic \
   --disable-canberra \
-  --disable-tclinterp \
   --enable-multibyte \
   --enable-cscope \
   --with-features=huge \
   --with-compiledby="<volkerdi@slackware.com>" \
   --build=$ARCH-slackware-linux || exit 1
-
-  # I had been adding this, but got 100% complaints and 0% kudos:
-  #  --enable-rubyinterp
 }
 
 cd $TMP/vim-$VERSION || exit 1
diff --git a/source/d/subversion/subversion.SlackBuild b/source/d/subversion/subversion.SlackBuild
index a3d59afd6..a9e32457e 100755
--- a/source/d/subversion/subversion.SlackBuild
+++ b/source/d/subversion/subversion.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=subversion
 VERSION=${VERSION:-$(echo subversion-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-4}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/openexr/openexr.SlackBuild b/source/l/openexr/openexr.SlackBuild
index 286b4fc0f..6305eae95 100755
--- a/source/l/openexr/openexr.SlackBuild
+++ b/source/l/openexr/openexr.SlackBuild
@@ -27,7 +27,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=openexr
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/python-idna/python-idna.SlackBuild b/source/l/python-idna/python-idna.SlackBuild
index a5e6f9d24..3ce4eb5f2 100755
--- a/source/l/python-idna/python-idna.SlackBuild
+++ b/source/l/python-idna/python-idna.SlackBuild
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=python-idna
 VERSION=${VERSION:-$(echo idna-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 SRCNAM=idna
 
diff --git a/source/n/cifs-utils/cifs-utils.SlackBuild b/source/n/cifs-utils/cifs-utils.SlackBuild
index a7af8f9f2..501cae5bd 100755
--- a/source/n/cifs-utils/cifs-utils.SlackBuild
+++ b/source/n/cifs-utils/cifs-utils.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=cifs-utils
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -74,16 +74,13 @@ TMP=${TMP:-/tmp}
 PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
-mkdir -p $TMP $PKG
+mkdir -p $TMP $PKG/sbin
 
 cd $TMP
 rm -rf $PKGNAM-$VERSION
 tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
 cd $PKGNAM-$VERSION
 
-# Fix for new libcap-ng:
-zcat $CWD/cifs-utils.f4e7c84467152624a288351321c8664dbf3364af.patch.gz | patch -p1 --verbose || exit 1
-
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
diff --git a/source/n/cifs-utils/cifs-utils.f4e7c84467152624a288351321c8664dbf3364af.patch b/source/n/cifs-utils/cifs-utils.f4e7c84467152624a288351321c8664dbf3364af.patch
deleted file mode 100644
index ed319182c..000000000
--- a/source/n/cifs-utils/cifs-utils.f4e7c84467152624a288351321c8664dbf3364af.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From f4e7c84467152624a288351321c8664dbf3364af Mon Sep 17 00:00:00 2001
-From: Jonas Witschel <diabonas@archlinux.org>
-Date: Sat, 21 Nov 2020 11:41:26 +0100
-Subject: [PATCH 1/2] mount.cifs: update the cap bounding set only when
- CAP_SETPCAP is given
-
-libcap-ng 0.8.1 tightened the error checking on capng_apply, returning an error
-of -4 when trying to update the capability bounding set without having the
-CAP_SETPCAP capability to be able to do so. Previous versions of libcap-ng
-silently skipped updating the bounding set and only updated the normal
-CAPNG_SELECT_CAPS capabilities instead.
-
-Check beforehand whether we have CAP_SETPCAP, in which case we can use
-CAPNG_SELECT_BOTH to update both the normal capabilities and the bounding set.
-Otherwise, we can at least update the normal capabilities, but refrain from
-trying to update the bounding set to avoid getting an error.
-
-Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
----
- mount.cifs.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/mount.cifs.c b/mount.cifs.c
-index 4feb397..88b8b69 100644
---- a/mount.cifs.c
-+++ b/mount.cifs.c
-@@ -338,6 +338,8 @@ static int set_password(struct parsed_mount_info *parsed_info, const char *src)
- static int
- drop_capabilities(int parent)
- {
-+	capng_select_t set = CAPNG_SELECT_CAPS;
-+
- 	capng_setpid(getpid());
- 	capng_clear(CAPNG_SELECT_BOTH);
- 	if (parent) {
-@@ -355,7 +357,10 @@ drop_capabilities(int parent)
- 			return EX_SYSERR;
- 		}
- 	}
--	if (capng_apply(CAPNG_SELECT_BOTH)) {
-+	if (capng_have_capability(CAPNG_EFFECTIVE, CAP_SETPCAP)) {
-+		set = CAPNG_SELECT_BOTH;
-+	}
-+	if (capng_apply(set)) {
- 		fprintf(stderr, "Unable to apply new capability set.\n");
- 		return EX_SYSERR;
- 	}
--- 
-2.29.2
-
-
-From 64dfbafe7a0639a96d67f0b840b6e6498e1f68a9 Mon Sep 17 00:00:00 2001
-From: Jonas Witschel <diabonas@archlinux.org>
-Date: Sat, 21 Nov 2020 11:48:33 +0100
-Subject: [PATCH 2/2] cifs.upall: update the cap bounding set only when
- CAP_SETPCAP is given
-
-libcap-ng 0.8.1 tightened the error checking on capng_apply, returning an error
-of -4 when trying to update the capability bounding set without having the
-CAP_SETPCAP capability to be able to do so. Previous versions of libcap-ng
-silently skipped updating the bounding set and only updated the normal
-CAPNG_SELECT_CAPS capabilities instead.
-
-Check beforehand whether we have CAP_SETPCAP, in which case we can use
-CAPNG_SELECT_BOTH to update both the normal capabilities and the bounding set.
-Otherwise, we can at least update the normal capabilities, but refrain from
-trying to update the bounding set to avoid getting an error.
-
-Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
----
- cifs.upcall.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/cifs.upcall.c b/cifs.upcall.c
-index 1559434..af1a0b0 100644
---- a/cifs.upcall.c
-+++ b/cifs.upcall.c
-@@ -88,6 +88,8 @@ typedef enum _sectype {
- static int
- trim_capabilities(bool need_environ)
- {
-+	capng_select_t set = CAPNG_SELECT_CAPS;
-+
- 	capng_clear(CAPNG_SELECT_BOTH);
- 
- 	/* SETUID and SETGID to change uid, gid, and grouplist */
-@@ -105,7 +107,10 @@ trim_capabilities(bool need_environ)
- 		return 1;
- 	}
- 
--	if (capng_apply(CAPNG_SELECT_BOTH)) {
-+	if (capng_have_capability(CAPNG_EFFECTIVE, CAP_SETPCAP)) {
-+		set = CAPNG_SELECT_BOTH;
-+	}
-+	if (capng_apply(set)) {
- 		syslog(LOG_ERR, "%s: Unable to apply capability set: %m\n", __func__);
- 		return 1;
- 	}
--- 
-2.29.2
-
diff --git a/source/n/epic5/epic5.SlackBuild b/source/n/epic5/epic5.SlackBuild
index 7ec102f4e..84873f46a 100755
--- a/source/n/epic5/epic5.SlackBuild
+++ b/source/n/epic5/epic5.SlackBuild
@@ -26,7 +26,7 @@ PKGNAM=epic5
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 EPICVER=5
 HELPFILE=current
-BUILD=${BUILD:-4}
+BUILD=${BUILD:-5}
 
 ## Default to no Ruby support, since it seems that ruby-2.7.0 is not compatible.
 ## Patches to fix this are welcome, otherwise we'll keep an eye on upstream.
diff --git a/source/x/marisa/marisa.SlackBuild b/source/x/marisa/marisa.SlackBuild
index 682e0f834..bf6884be8 100755
--- a/source/x/marisa/marisa.SlackBuild
+++ b/source/x/marisa/marisa.SlackBuild
@@ -26,7 +26,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=marisa
 SRCNAM=marisa-trie
 VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d- | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}