Sat Jan 26 04:15:08 UTC 201920190126041508

a/mkinitrd-1.4.11-x86_64-11.txz:  Rebuilt.
  setup.01.mkinitrd: revert to the previous command line for
  mkinitrd_command_generator.sh (the new one fails when called from the
  installer).

8 files changed, 94 insertions, 29 deletions

diff --git a/source/a/mkinitrd/mkinitrd.SlackBuild b/source/a/mkinitrd/mkinitrd.SlackBuild
index 38ea9485e..4e298baec 100755
--- a/source/a/mkinitrd/mkinitrd.SlackBuild
+++ b/source/a/mkinitrd/mkinitrd.SlackBuild
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=mkinitrd
 VERSION=${VERSION:-1.4.11}
 BB=1.28.3
-BUILD=${BUILD:-9}
+BUILD=${BUILD:-11}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/a/mkinitrd/mkinitrd_command_generator.sh b/source/a/mkinitrd/mkinitrd_command_generator.sh
index d6d0d1a13..df6f24c9c 100644
--- a/source/a/mkinitrd/mkinitrd_command_generator.sh
+++ b/source/a/mkinitrd/mkinitrd_command_generator.sh
@@ -341,6 +341,10 @@ while [ ! -z "$1" ]; do
       shift
       ;;
     -k)
+      if [ "$2" = "" ]; then
+        echo "Error: -k requires a kernel version."
+        exit 1
+      fi
       KVER=$2
       shift 2
       ;;
diff --git a/source/a/mkinitrd/setup.01.mkinitrd b/source/a/mkinitrd/setup.01.mkinitrd
index b8004470e..8bddb5c55 100644
--- a/source/a/mkinitrd/setup.01.mkinitrd
+++ b/source/a/mkinitrd/setup.01.mkinitrd
@@ -8,31 +8,62 @@ fi
 
 # Next, if boot/vmlinuz-generic is a symlink to a kernel, generate a ramdisk
 # using the modules for that kernel:
-if [ -f $(readlink -f boot/vmlinuz-generic) ]; then
-  KERNEL_SYMLINK="boot/vmlinuz-generic"
+KERNEL_SYMLINK="boot/vmlinuz-generic"
+if [ -L $KERNEL_SYMLINK ]; then
   KERNEL_VERSION="$(readlink -f $KERNEL_SYMLINK | sed "s/-smp/_smp/g" | rev | cut -f 1 -d - | rev | sed "s/_smp/-smp/g")"
-dialog --title "GENERATING INITIAL RAMDISK" --infobox \
-  "Generating an initial ramdisk for use with the $KERNEL_VERSION generic \
+  # Sanity check. Not sure how/why, but there are reports we can arrive here
+  # without a $KERNEL_VERSION. The only way I see how is if the symlink were
+  # pointing to file with a malformed name
+  # (i.e. not ${KERNEL_SYMLINK}-${KERNEL_VERSION}).
+  # If ${KERNEL_VERSION} is blank, we'll bail out here.
+  # Any information on known cases that might cause this would be appreciated.
+  if [ ! "$KERNEL_VERSION" = "" ]; then
+    dialog --title "GENERATING INITIAL RAMDISK" --infobox \
+    "Generating an initial ramdisk for use with the $KERNEL_VERSION generic \
 kernel. The initial ramdisk contains kernel modules needed to mount the \
 root partition, and must be regenerated whenever the kernel is updated. To \
 regenerate the initrd, select this setup script from within pkgtool, or run \
 'geninitrd' which will produce an initial ramdisk (/boot/initrd.gz) for the \
 kernel pointed to by the /$KERNEL_SYMLINK symlink." 9 68
-  chroot . /usr/share/mkinitrd/mkinitrd_command_generator.sh -k $KERNEL_VERSION | sed "s/-c -k/-k/g" | chroot . bash 1> /dev/null 2> /dev/null
+    chroot . /usr/share/mkinitrd/mkinitrd_command_generator.sh -k $KERNEL_VERSION | sed "s/-c -k/-k/g" | chroot . bash 1> /dev/null 2> /dev/null
+  else
+    dialog --title "INTERNAL ERROR" --msgbox \
+    "An internal error was detected. Please report the following information: \n\
+KERNEL_SYMLINK = $KERNEL_SYMLINK \n\
+KERNEL_SYMLINK (points to) = $(readlink -f $KERNEL_SYMLINK) \n\
+KERNEL_VERSION (is blank) \n\
+ls -l \$KERNEL_SYMLINK: \n\
+$(ls -l $KERNEL_SYMLINK)" 0 0
+  fi
 fi
 
 # If boot/vmlinuz-generic-smp is a symlink to a kernel, also include the
 # modules for that kernel:
-if [ -f $(readlink -f boot/vmlinuz-generic-smp) ]; then
-  KERNEL_SYMLINK="boot/vmlinuz-generic-smp"
+KERNEL_SYMLINK="boot/vmlinuz-generic-smp"
+if [ -L $KERNEL_SYMLINK ]; then
   KERNEL_VERSION="$(readlink -f $KERNEL_SYMLINK | sed "s/-smp/_smp/g" | rev | cut -f 1 -d - | rev | sed "s/_smp/-smp/g")"
-dialog --title "GENERATING INITIAL RAMDISK" --infobox \
-  "Generating an initial ramdisk for use with the $KERNEL_VERSION generic \
+  # Sanity check. Not sure how/why, but there are reports we can arrive here
+  # without a $KERNEL_VERSION. The only way I see how is if the symlink were
+  # pointing to file with a malformed name
+  # (i.e. not ${KERNEL_SYMLINK}-${KERNEL_VERSION}).
+  # If ${KERNEL_VERSION} is blank, we'll bail out here.
+  # Any information on known cases that might cause this would be appreciated.
+  if [ ! "$KERNEL_VERSION" = "" ]; then
+    dialog --title "GENERATING INITIAL RAMDISK" --infobox \
+    "Generating an initial ramdisk for use with the $KERNEL_VERSION generic \
 kernel. The initial ramdisk contains kernel modules needed to mount the \
 root partition, and must be regenerated whenever the kernel is updated. To \
 regenerate the initrd, select this setup script from within pkgtool, or run \
 'geninitrd' which will produce an initial ramdisk (/boot/initrd.gz) for the \
 kernel pointed to by the /$KERNEL_SYMLINK symlink." 9 68
-  chroot . /usr/share/mkinitrd/mkinitrd_command_generator.sh -k $KERNEL_VERSION | sed "s/-c -k/-k/g" | chroot . bash 1> /dev/null 2> /dev/null
+    chroot . /usr/share/mkinitrd/mkinitrd_command_generator.sh -k $KERNEL_VERSION | sed "s/-c -k/-k/g" | chroot . bash 1> /dev/null 2> /dev/null
+  else
+    dialog --title "INTERNAL ERROR" --msgbox \
+    "An internal error was detected. Please report the following information: \n\
+KERNEL_SYMLINK = $KERNEL_SYMLINK \n\
+KERNEL_SYMLINK (points to) = $(readlink -f $KERNEL_SYMLINK) \n\
+KERNEL_VERSION (is blank) \n\
+ls -l \$KERNEL_SYMLINK: \n\
+$(ls -l $KERNEL_SYMLINK)" 0 0
+  fi
 fi
-
diff --git a/source/installer/ChangeLog.txt b/source/installer/ChangeLog.txt
index cc14f1412..fa87dcc76 100644
--- a/source/installer/ChangeLog.txt
+++ b/source/installer/ChangeLog.txt
@@ -1,3 +1,11 @@
+Fri Jan 25 23:06:42 UTC 2019
+  Updated the elilo bootloaders in /EFI/BOOT which were older versions
+  (possibly with the 8MB kernel size limit?)
++--------------------------+
+Thu Jan 24 20:01:25 UTC 2019
+  SeTEFI: If the kernel doesn't detect efi, bail.
+  SeTEFI: Detect EFI partition using lsblk. Thanks to Didier Spaier.
++--------------------------+
 Tue Jan 22 22:42:47 UTC 2019
   Before running the CONFIGURE section, create bind mounts to /dev, /proc, and
   /sys. This is useful for chrooting and setting up boot loaders.
diff --git a/source/installer/sources/initrd/usr/lib/setup/SeTEFI b/source/installer/sources/initrd/usr/lib/setup/SeTEFI
index 35ac5f9fa..bb00d1e52 100755
--- a/source/installer/sources/initrd/usr/lib/setup/SeTEFI
+++ b/source/installer/sources/initrd/usr/lib/setup/SeTEFI
@@ -4,27 +4,31 @@ T_PX="`cat $TMP/SeTT_PX`"
 if [ ! -d $TMP ]; then
   mkdir -p $TMP
 fi
+
+# If the kernel does not support EFI, then we shouldn't be trying to mount an
+# EFI partition. If we do, probably the only device found with an EFI structure
+# will be the installer, which we don't want added to /etc/fstab.
+if [ ! -d /sys/firmware/efi ]; then
+  exit
+fi
+
 rm -f $TMP/SeTefipartitions
 touch $TMP/SeTefipartitions
 
 # Scan for EFI partitions:
-# We accept at most 10 NVMe controllers, each controlling at most 4 SSDs
-for drive in sda sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl sdm sdn sdo sdp \
-  mmcblk0 mmcblk1 mmcblk2 mmcblk3 mmcblk4 mmcblk5 mmcblk6 mmcblk7 mmcblk8 mmcblk9 \
-  nvme0n1 nvme1n1 nvme2n1 nvme3n1 nvme4n1 nvme5n1 nvme6n1 nvme7n1 nvme8n1 nvme9n1 \
-  nvme0n2 nvme1n2 nvme2n2 nvme3n2 nvme4n2 nvme5n2 nvme6n2 nvme7n2 nvme8n2 nvme9n2 \
-  nvme0n3 nvme1n3 nvme2n3 nvme3n3 nvme4n3 nvme5n3 nvme6n3 nvme7n3 nvme8n3 nvme9n3 \
-  nvme0n4 nvme1n4 nvme2n4 nvme3n4 nvme4n4 nvme5n4 nvme6n4 nvme7n4 nvme8n4 nvme9n4  ; do
-  gdisk -l /dev/$drive 2> /dev/null | grep -w EF00 | while read efisp ; do
-    p=""
-    echo $drive| grep -q nvme && p="p"
-    echo /dev/$drive$p$(expr $(echo "$efisp" | cut -b 1-4)) >> $TMP/SeTefipartitions
-  done
-done
+# The UEFI specification states that an EFI System partition should have 
+# a GUID of C12A7328-F81F-11D2-BA4B-00A0C93EC93B for a GPT disk layout.
+# In case of a MBR disk layout instead, an ESP should have an OS type of
+# 0xEF. lsblk writes these values in the same field: PARTTYPE.
+ESPGUID=C12A7328-F81F-11D2-BA4B-00A0C93EC93B
+OSTYPE=0xEF
+lsblk -l -o parttype,name | \
+grep -i -F -e "$ESPGUID" -e "$OSTYPE" | \
+sed "s,[^ ]* ,/dev/," > $TMP/SeTefipartitions
 
-if [ "$(cat $TMP/SeTefipartitions)" = "" ]; then # No EFI partitions
+if [ ! -s $TMP/SeTefipartitions ]; then # No EFI partitions
   rm -f $TMP/SeTefipartitions
- exit
+  exit
 fi
 
 # Initially, we will just take the first EFI partition found, which
diff --git a/source/n/gnutls/gnutls.SlackBuild b/source/n/gnutls/gnutls.SlackBuild
index 40e523c25..2a87b9698 100755
--- a/source/n/gnutls/gnutls.SlackBuild
+++ b/source/n/gnutls/gnutls.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=gnutls
 VERSION=${VERSION:-$(echo gnutls-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/x/xdg-utils/xdg-open.no.relative.paths.diff b/source/x/xdg-utils/xdg-open.no.relative.paths.diff
new file mode 100644
index 000000000..f28308eeb
--- /dev/null
+++ b/source/x/xdg-utils/xdg-open.no.relative.paths.diff
@@ -0,0 +1,15 @@
+--- ./scripts/xdg-open.in.orig	2018-05-10 10:02:31.000000000 -0500
++++ ./scripts/xdg-open.in	2019-01-25 13:01:17.492733618 -0600
+@@ -453,12 +453,6 @@
+     # pcmanfm only knows how to handle file:// urls and filepaths, it seems.
+     if pcmanfm --help >/dev/null 2>&1 -a is_file_url_or_path "$1"; then
+         local file="$(file_url_to_path "$1")"
+-
+-        # handle relative paths
+-        if ! echo "$file" | grep -q ^/; then
+-            file="$(pwd)/$file"
+-        fi
+-
+         pcmanfm "$file"
+     else
+         open_generic "$1"
diff --git a/source/x/xdg-utils/xdg-utils.SlackBuild b/source/x/xdg-utils/xdg-utils.SlackBuild
index c15d398ec..060fbb536 100755
--- a/source/x/xdg-utils/xdg-utils.SlackBuild
+++ b/source/x/xdg-utils/xdg-utils.SlackBuild
@@ -30,7 +30,7 @@ PKGNAM=xdg-utils
 VERSION=1.1.3
 PKG_VERSION=${VERSION/-/_}
 ARCH=noarch
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
 # the name of the created package would be, and then exit. This information
@@ -54,6 +54,9 @@ rm -rf $PKGNAM-$VERSION
 tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
 cd $PKGNAM-$VERSION || exit 1
 
+# Fix xdg-open usage in LXDE:
+zcat $CWD/xdg-open.no.relative.paths.diff.gz | patch -p1 --verbose || exit 1
+
 chown -R root:root .
 find . \
   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \