Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 335 insertions, 0 deletions

diff --git a/source/x/x11/x11.SlackBuild b/source/x/x11/x11.SlackBuild
new file mode 100755
index 000000000..e47537981
--- /dev/null
+++ b/source/x/x11/x11.SlackBuild
@@ -0,0 +1,335 @@
+#!/bin/sh
+# Copyright 2007-2009  Patrick Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# To build only a single package group, specify it as $1, like:
+# ./x11.SlackBuild lib
+# To build only a single package, specify both the source directory
+# and the name of the package, like:
+# ./x11.SlackBuild lib libX11
+
+pkgbase() {
+  PKGEXT=$(echo $1 | rev | cut -f 1 -d . | rev)
+  case $PKGEXT in
+  'gz' )
+    PKGRETURN=$(basename $1 .tar.gz)
+    ;;
+  'bz2' )
+    PKGRETURN=$(basename $1 .tar.bz2)
+    ;;
+  'lzma' )
+    PKGRETURN=$(basename $1 .tar.lzma)
+    ;;
+  'xz' )
+    PKGRETURN=$(basename $1 .tar.xz)
+    ;;
+  *)
+    PKGRETURN=$(basename $1)
+    ;;
+  esac
+  echo $PKGRETURN
+}
+
+# Set initial variables:
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+
+# A lot of this stuff just controls the package names this time:
+VERSION=${VERSION:-7.4}
+ARCH=${ARCH:-x86_64}
+NUMJOBS=${NUMJOBS:-" -j7 "}
+BUILD=${BUILD:-1}
+
+PKGARCH=$ARCH
+
+if [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+else
+  LIBDIRSUFFIX=""
+fi
+
+# Set up a few useful functions:
+
+fix_perms() {
+  chown -R root:root .
+  find . \
+   \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+   -exec chmod 755 {} \; -o \
+   \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+   -exec chmod 644 {} \;
+}
+
+process_man_pages() {
+  # Compress and if needed symlink the man pages:
+  if [ -d usr/man ]; then
+    ( cd usr/man
+      for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.*
+      )
+      done
+    )
+  fi
+}
+
+process_info_pages() {
+  # Compress info pages and purge "dir" file from the package:
+  if [ -d usr/info ]; then
+    ( cd usr/info
+      rm -f dir
+      gzip -9 *
+    )
+  fi
+}
+
+no_usr_share_doc() {
+  # If there are docs, move them:
+  if [ -d usr/share/doc ]; then
+    mkdir -p usr/doc
+    mv usr/share/doc/* usr/doc
+    rmdir usr/share/doc
+  fi
+}
+
+# Set the compile options for the $ARCH being used:
+. $CWD/arch.use.flags
+
+SLACK_X_BUILD_DIR=$TMP/x11-build
+mkdir -p $SLACK_X_BUILD_DIR
+
+# Better have some binaries installed first, as this may not be
+# in the "magic order".  I built mine by hand through trial-and-error
+# before getting this script to work.  It wasn't that hard...  I think.  ;-)
+( cd src
+  for x_source_dir in proto data util xcb lib app doc driver font xserver ; do
+    # See if $1 is a source directory like "lib":
+    if [ ! -z "$1" ]; then
+      if [ ! "$1" = "${x_source_dir}" ]; then
+        continue
+      fi
+    fi
+    PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir}
+    rm -rf $PKG
+    mkdir -p $PKG
+    ( cd $x_source_dir
+      for x_pkg in *.tar.?z* ; do
+        # Reset $PKGARCH to its initial value:
+        PKGARCH=$ARCH
+        PKGNAME=$(echo $x_pkg | rev | cut -f 2- -d - | rev)
+        # Perhaps $PKGARCH should be something different:
+        if grep -wq "^$PKGNAME" ${CWD}/noarch ; then
+          PKGARCH=noarch
+        fi 
+        if grep -wq "^$PKGNAME" ${CWD}/package-blacklist ; then
+          continue
+        fi
+        cd $SLACK_X_BUILD_DIR
+        # If $2 is set, we only want to build one package:
+        if [ ! -z "$2" ]; then
+          if [ "$2" = "$PKGNAME" ]; then
+            # Set $PKG to a private dir for the modular package build:
+            PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME
+            rm -rf $PKG
+            mkdir -p $PKG
+          else
+            continue
+          fi
+        fi
+        if grep -wq "^$PKGNAME" ${CWD}/modularize ; then
+          # Set $PKG to a private dir for the modular package build:
+          PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME
+          rm -rf $PKG
+          mkdir -p $PKG
+        fi
+
+        # Let's figure out the version number on the modular package:
+        MODULAR_PACKAGE_VERSION=$(echo $x_pkg | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
+
+        rm -rf $(pkgbase $x_pkg)
+        tar xf $CWD/src/${x_source_dir}/${x_pkg} || exit 1
+        cd $(pkgbase $x_pkg) || exit 1
+
+        fix_perms
+
+        # If any patches are needed, call this script to apply them:
+        if [ -r $CWD/patch/${PKGNAME}.patch ]; then
+          . $CWD/patch/${PKGNAME}.patch
+        fi
+
+        # I heard somewhere that -O2 breaks some chipset or another.  If you encounter
+        # problems, please contact volkerdi@slackware.com.  Thanks! :-)
+
+        # ./configure, using custom configure script if needed:
+        if [ -r $CWD/configure/${PKGNAME} ]; then
+          . $CWD/configure/${PKGNAME}
+        else
+          # This is the default configure script:
+          . $CWD/configure/configure
+        fi
+
+        if ! make $NUMJOBS ; then
+          touch ${SLACK_X_BUILD_DIR}/${PKGNAME}.failed
+          continue
+        fi
+
+        make install DESTDIR=$PKG
+   
+        # Strip binaries:
+        ( cd $PKG
+          find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+          find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+          find . | xargs file | grep "current ar archive" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
+        )
+
+        # If there's any special post-install things to do, do them:
+        if [ -r $CWD/post-install/${PKGNAME}.post-install ]; then
+          RUNSCRIPT=$(mktemp -p $TMP) || exit 1
+          cat $CWD/post-install/${PKGNAME}.post-install \
+            | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT
+          . $RUNSCRIPT
+          rm -f $RUNSCRIPT
+        fi
+
+        # If this package requires some doinst.sh material, add it here:
+        if [ -r $CWD/doinst.sh/${PKGNAME} ]; then
+          mkdir -p $PKG/install
+          cat $CWD/doinst.sh/${PKGNAME} \
+            | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
+            >> $PKG/install/doinst.sh
+        fi
+
+        # If this is a modular package, build it here:
+        if [ -d $SLACK_X_BUILD_DIR/package-$PKGNAME ]; then
+          cd $PKG
+          process_man_pages
+          process_info_pages
+          no_usr_share_doc          
+          mkdir -p $PKG/install
+          if [ -r $CWD/slack-desc/${PKGNAME} ]; then
+            cat $CWD/slack-desc/${PKGNAME} > $PKG/install/slack-desc
+          else
+            touch $PKG/install/slack-desc-missing
+          fi
+          if [ -r $CWD/build/${PKGNAME} ]; then
+            MODBUILD=$(cat $CWD/build/${PKGNAME})
+          else
+            MODBUILD=$BUILD
+          fi
+          if [ -r $CWD/makepkg/${PKGNAME} ]; then
+            BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME}
+          else
+            /sbin/makepkg -l y -c n ${SLACK_X_BUILD_DIR}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz
+          fi
+        fi
+
+        # Reset $PKG to assume we're building the whole source dir:
+        PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir}
+
+      done
+
+      # Nothing here?  Must have been fully modular. :-)
+      if [ ! -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/etc -a \
+        ! -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/usr ]; then
+        continue
+      fi
+
+      # Build an "x11-<sourcedir>" package for anything that wasn't built modular:
+      # It's safer to consider these to have binaries in them. ;-)
+      PKGARCH=$ARCH
+      cd $PKG
+      process_man_pages
+      process_info_pages
+      no_usr_share_doc
+      # If there are post-install things to do for the combined package,
+      # we do them here.  This could be used for things like making a
+      # VERSION number for a combined package.  :-)
+      if [ -r $CWD/post-install/x11-${x_source_dir}.post-install ]; then
+        RUNSCRIPT=$(mktemp -p $TMP) || exit 1
+        cat $CWD/post-install/x11-${x_source_dir}.post-install \
+          | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT
+        . $RUNSCRIPT
+        rm -f $RUNSCRIPT
+      fi
+      mkdir -p $PKG/install
+      if [ -r $CWD/slack-desc/x11-${x_source_dir} ]; then
+        cat $CWD/slack-desc/x11-${x_source_dir} > $PKG/install/slack-desc
+      else
+        touch $PKG/install/slack-desc-missing
+      fi
+      if [ -r $CWD/doinst.sh/x11-${x_source_dir} ]; then
+        cat $CWD/doinst.sh/x11-${x_source_dir} \
+          | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \
+          >> $PKG/install/doinst.sh
+      fi
+      if [ -r $CWD/build/x11-${PKGNAME} ]; then
+        SRCDIRBUILD=$(cat $CWD/build/x11-${PKGNAME})
+      else
+        SRCDIRBUILD=$BUILD
+      fi
+      if [ -r $CWD/makepkg/${PKGNAME} ]; then
+        BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME}
+      else
+        /sbin/makepkg -l y -c n ${SLACK_X_BUILD_DIR}/x11-${x_source_dir}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz
+      fi
+    )
+  done
+)
+
+exit 0
+
+# I don't think I'll be using the following stuff, since I went for the latest in
+# "individual", rather than a release.  That was mostly because version 7.1 depends
+# on a version of Mesa that won't build against kernel headers this new (&etc.).
+
+# If environment variable "REFRESH" is exported, start by refreshing the source tree:
+# export REFRESH yes
+if [ ! -z "$REFRESH" ]; then
+  # Only works once, unless you uncomment above.
+  unset REFRESH
+  ( cd patches
+    lftp -c \
+    "lftp ftp://ftp.x.org:/pub/X11R7.1/patches
+     mirror --delete --dereference .
+     exit"
+    chmod 644 *
+  )
+  ( cd src
+    mkdir -p update everything
+    for dir in app data deprecated doc driver extras font lib proto util xserver ; do
+      # We won't really download "update", as problems ensue.  Plus, --dereference is
+      # bringing us updated files when needed, so it's redundant (like "everything").
+      if [ ! -d $dir ]; then
+        mkdir $dir
+      fi
+      ( cd $dir
+        lftp -c \
+        "lftp ftp://ftp.x.org:/pub/X11R7.1/src/$dir
+         mirror -c --delete --dereference --include-glob "*.tar.bz2" .
+         exit"
+        chmod 644 *
+      )
+    done
+  )
+fi
+