Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 107 insertions, 0 deletions

diff --git a/source/n/network-scripts/scripts/rc.inet1.conf b/source/n/network-scripts/scripts/rc.inet1.conf
new file mode 100644
index 000000000..555210c4b
--- /dev/null
+++ b/source/n/network-scripts/scripts/rc.inet1.conf
@@ -0,0 +1,107 @@
+# /etc/rc.d/rc.inet1.conf
+#
+# This file contains the configuration settings for network interfaces.
+# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
+# If you don't have an interface, leave the settings null ("").
+
+# You can configure network interfaces other than eth0,eth1... by setting
+# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
+# or empty, it is assumed you're configuring eth<interface>.
+
+# Several other parameters are available, the end of this file contains a
+# comprehensive set of examples.
+
+# =============================================================================
+
+# Config information for eth0:
+IPADDR[0]=""
+NETMASK[0]=""
+USE_DHCP[0]=""
+DHCP_HOSTNAME[0]=""
+
+# Config information for eth1:
+IPADDR[1]=""
+NETMASK[1]=""
+USE_DHCP[1]=""
+DHCP_HOSTNAME[1]=""
+
+# Config information for eth2:
+IPADDR[2]=""
+NETMASK[2]=""
+USE_DHCP[2]=""
+DHCP_HOSTNAME[2]=""
+
+# Config information for eth3:
+IPADDR[3]=""
+NETMASK[3]=""
+USE_DHCP[3]=""
+DHCP_HOSTNAME[3]=""
+
+# Default gateway IP address:
+GATEWAY=""
+
+# Change this to "yes" for debugging output to stdout.  Unfortunately,
+# /sbin/hotplug seems to disable stdout so you'll only see debugging output
+# when rc.inet1 is called directly.
+DEBUG_ETH_UP="no"
+
+## Example config information for wlan0.  Uncomment the lines you need and fill
+## in your data.  (You may not need all of these for your wireless network)
+#IFNAME[4]="wlan0"
+#IPADDR[4]=""
+#NETMASK[4]=""
+#USE_DHCP[4]="yes"
+#DHCP_HOSTNAME[4]="icculus-wireless"
+#DHCP_KEEPRESOLV[4]="yes"
+#DHCP_KEEPNTP[4]="yes"
+#DHCP_KEEPGW[4]="yes"
+#DHCP_IPADDR[4]=""
+#WLAN_ESSID[4]=DARKSTAR
+#WLAN_MODE[4]=Managed
+#WLAN_RATE[4]="54M auto"
+#WLAN_CHANNEL[4]="auto"
+#WLAN_KEY[4]="D5A31F54ACF0487C2D0B1C10D2"
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
+#WLAN_WPA[4]="wpa_supplicant"
+#WLAN_WPADRIVER[4]="wext"
+#WLAN_WPAWAIT[4]=30
+
+## Some examples of additional network parameters that you can use.
+## Config information for wlan0:
+#IFNAME[4]="wlan0"              # Use a different interface name instead of
+                                # the default 'eth4'
+#IFNAME[4]="eth0:1"             # Set up an IP alias.
+#HWADDR[4]="00:01:23:45:67:89"  # Overrule the card's hardware MAC address
+#MTU[4]=""                      # The default MTU is 1500, but you might need
+                                # 1360 when you use NAT'ed IPSec traffic.
+#DHCP_TIMEOUT[4]=15             # The default timeout for the DHCP client to
+                                # wait for server resonse is 10 seconds, but
+                                # you might want a shorter or longer wait.
+#DHCP_KEEPRESOLV[4]="yes"       # If you dont want /etc/resolv.conf overwritten
+#DHCP_KEEPNTP[4]="yes"          # If you don't want ntp.conf overwritten
+#DHCP_KEEPGW[4]="yes"           # If you don't want the DHCP server to change
+                                # your default gateway
+#DHCP_IPADDR[4]=""              # Request a specific IP address from the DHCP
+                                # server
+#DHCP_DEBUG[4]="yes"            # Make dhcpcd show verbose diagnostics
+#DHCP_NOIPV4LL[4]="yes"         # Do not assign an ipv4ll address when a DHCP
+                                # server is not found (ipv4ll link-local
+                                # adresses in the IP range 169.254.0.0/16 are
+                                # also known as "zeroconf" addresses)
+#WLAN_ESSID[4]=DARKSTAR         # An example of how you can override _any_
+                                # parameter defined in rc.wireless.conf, by
+                                # prepending 'WLAN_' to the parameter's name.
+                                # Useful with multiple wireless interfaces.
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
+                                # Some drivers require a private ioctl to be
+                                # set through the iwpriv command. If more than
+                                # one is required, you can place them in the
+                                # IWPRIV parameter (separated with the pipe (|)
+                                # character, see the example).
+#WLAN_WPA[4]="wpa_supplicant"   # Run wpa_supplicant for WPA support
+#WLAN_WPADRIVER[4]="ndiswrapper"# Tell wpa_supplicant to specifically use the
+                                # ndiswrapper driver (if you leave this empty
+                                # the 'wext' driver is used by default)
+#WLAN_WPAWAIT[4]=30             # In case it takes long for the WPA association
+                                # to finish, you can increase the wait time
+                                # (defaults to 10 seconds)