Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 632 insertions, 0 deletions

diff --git a/source/n/network-scripts/scripts/netconfig b/source/n/network-scripts/scripts/netconfig
new file mode 100644
index 000000000..04afd698e
--- /dev/null
+++ b/source/n/network-scripts/scripts/netconfig
@@ -0,0 +1,632 @@
+#!/bin/sh
+# A script to do basic network configuration.
+# Mostly written by Patrick Volkerding <volkerdi@slackware.com>.
+# Modified to use /etc/rc.d/rc.inet1.conf Tue Aug 26 16:51:48 PDT 2003 <pjv>
+
+write_config_files() {
+#
+############################################################################
+#			  The rc.inet1.conf file.
+############################################################################
+#
+
+# If we're doing loopback, we don't want 127.0.0.1 and 255.255.255.0 in
+# rc.inet1.conf... it's better to leave the values null.  However, since
+# we use the IP in other places, we need to make a copy for here.
+RCIPCOPY=$IPADDR
+RCMASKCOPY=$NETMASK
+if [ "$RCIPCOPY" = "127.0.0.1" ]; then
+  RCIPCOPY=""
+  RCMASKCOPY=""
+fi
+
+# echo "Creating /$RC..."
+/bin/cat << ENDFILE > $RC
+# /etc/rc.d/rc.inet1.conf
+#
+# This file contains the configuration settings for network interfaces.
+# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
+# If you don't have an interface, leave the settings null ("").
+
+# You can configure network interfaces other than eth0,eth1... by setting
+# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
+# or empty, it is assumed you're configuring eth<interface>.
+
+# Several other parameters are available, the end of this file contains a
+# comprehensive set of examples.
+
+# =============================================================================
+
+# Config information for eth0:
+IPADDR[0]="$RCIPCOPY"
+NETMASK[0]="$RCMASKCOPY"
+USE_DHCP[0]="$USE_DHCP"
+DHCP_HOSTNAME[0]="$DHCP_HOSTNAME"
+
+# Config information for eth1:
+IPADDR[1]=""
+NETMASK[1]=""
+USE_DHCP[1]=""
+DHCP_HOSTNAME[1]=""
+
+# Config information for eth2:
+IPADDR[2]=""
+NETMASK[2]=""
+USE_DHCP[2]=""
+DHCP_HOSTNAME[2]=""
+
+# Config information for eth3:
+IPADDR[3]=""
+NETMASK[3]=""
+USE_DHCP[3]=""
+DHCP_HOSTNAME[3]=""
+
+# Default gateway IP address:
+GATEWAY="$GATEWAY"
+
+# Change this to "yes" for debugging output to stdout.  Unfortunately,
+# /sbin/hotplug seems to disable stdout so you'll only see debugging output
+# when rc.inet1 is called directly.
+DEBUG_ETH_UP="no"
+
+## Example config information for wlan0.  Uncomment the lines you need and fill
+## in your info.  (You may not need all of these for your wireless network)
+#IFNAME[4]="wlan0"
+#IPADDR[4]=""
+#NETMASK[4]=""
+#USE_DHCP[4]="yes"
+#DHCP_HOSTNAME[4]="icculus-wireless"
+#DHCP_KEEPRESOLV[4]="yes"
+#DHCP_KEEPNTP[4]="yes"
+#DHCP_KEEPGW[4]="yes"
+#DHCP_IPADDR[4]=""
+#WLAN_ESSID[4]=BARRIER05
+#WLAN_MODE[4]=Managed
+##WLAN_RATE[4]="54M auto"
+##WLAN_CHANNEL[4]="auto"
+##WLAN_KEY[4]="D5AD1F04ACF048EC2D0B1C80C7"
+##WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
+#WLAN_WPA[4]="wpa_supplicant"
+#WLAN_WPADRIVER[4]="ndiswrapper"
+
+## Some examples of additional network parameters that you can use.
+## Config information for wlan0:
+#IFNAME[4]="wlan0"              # Use a different interface name nstead of
+                                # the default 'eth4'
+#HWADDR[4]="00:01:23:45:67:89"  # Overrule the card's hardware MAC address
+#MTU[4]=""                      # The default MTU is 1500, but you might need
+                                # 1360 when you use NAT'ed IPSec traffic.
+#DHCP_KEEPRESOLV[4]="yes"       # If you dont want /etc/resolv.conf overwritten
+#DHCP_KEEPNTP[4]="yes"          # If you don't want ntp.conf overwritten
+#DHCP_KEEPGW[4]="yes"           # If you don't want the DHCP server to change
+                                # your default gateway
+#DHCP_IPADDR[4]=""              # Request a specific IP address from the DHCP
+                                # server
+#WLAN_ESSID[4]=DARKSTAR         # Here, you can override _any_ parameter
+                                # defined in rc.wireless.conf, by prepending
+                                # 'WLAN_' to the parameter's name. Useful for
+                                # those with multiple wireless interfaces.
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
+                                # Some drivers require a private ioctl to be
+                                # set through the iwpriv command. If more than
+                                # one is required, you can place them in the
+                                # IWPRIV parameter (separated with the pipe (|)
+                                # character, see the example).
+ENDFILE
+#
+############################################################################
+#			  The networks file.
+############################################################################
+#
+#echo "Creating /$ETCNETWORKS..."
+/bin/cat <<EOF >$ETCNETWORKS
+#
+# networks	This file describes a number of netname-to-address
+#		mappings for the TCP/IP subsystem.  It is mostly
+#		used at boot time, when no name servers are running.
+#
+
+loopback	127.0.0.0
+localnet	$NETWORK
+
+# End of networks.
+EOF
+chmod 644 $ETCNETWORKS
+#
+############################################################################
+#			   The hosts file.
+############################################################################
+#
+#echo "Creating /$HOSTS..."
+/bin/cat << EOF > $HOSTS
+#
+# hosts		This file describes a number of hostname-to-address
+#		mappings for the TCP/IP subsystem.  It is mostly
+#		used at boot time, when no name servers are running.
+#		On small systems, this file can be used instead of a
+#		"named" name server.  Just add the names, addresses
+#		and any aliases to this file...
+#
+# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
+# should NEVER be named with the name of the machine.  It causes problems
+# for some (stupid) programs, irc and reputedly talk. :^)
+#
+
+# For loopbacking.
+127.0.0.1		localhost
+$IPADDR		$HOSTNM.$DOMAIN $HOSTNM
+
+# End of hosts.
+
+EOF
+chmod 644 $HOSTS
+#
+############################################################################
+#			The resolv.conf file.
+############################################################################
+#
+if [ ! "$NAMESERVER" = "" ]; then
+  echo "search $DOMAIN" >$RESOLV
+  echo "nameserver $NAMESERVER" >>$RESOLV
+else
+  echo "search $DOMAIN" >$RESOLV
+fi
+if [ -f $RESOLV ]; then
+  chmod 644 $RESOLV
+fi
+#
+############################################################################
+#			The rc.netdevice file.
+############################################################################
+#
+if [ -r /cardfound ]; then
+  if [ ! "`cat /cardfound`" = "" ]; then
+    cat << EOF > etc/rc.d/rc.netdevice
+# Load module for network device.
+# This script is automatically generated during the installation.
+
+/sbin/modprobe `cat /cardfound`
+
+EOF
+    chmod 755 etc/rc.d/rc.netdevice
+  fi
+fi
+rm -f $TMP/tempmsg /cardfound
+} # end write_config_files
+
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+ mkdir -p $TMP
+ chmod 700 $TMP
+fi
+
+# This checks IP address syntax.
+# usage: syntax_check ADDRESS #-OF-EXPECTED-SEGMENTS (up to 4)
+# example: syntax_check 123.22.43.1 4
+# returns: 0=found correct  1=too many fields  2=non numeric field found
+syntax_check_color() {
+  RET_CODE=0 
+  SCRATCH=$1
+  SCRATCH=`echo $SCRATCH | tr "." "/"`
+  INDEX=$2
+  while [ ! "$INDEX" = "0" ]; do
+    # OK, so I'm a LISP-head :^)
+    FIELD=`basename $SCRATCH`
+    SCRATCH=`dirname $SCRATCH`
+    if expr $FIELD + 1 1> /dev/null 2> /dev/null; then
+      true
+    else
+      RET_CODE=2; # non-numeric field
+    fi
+    INDEX=`expr $INDEX - 1`
+  done
+  if [ ! "$SCRATCH" = "." ]; then
+    RET_CODE=1; # too many arguments
+  fi
+  if [ "$3" = "WARN" -a ! "$RET_CODE" = "0" ]; then
+    cat << EOF > $TMP/tempmsg
+
+The address you have entered seems to be non-standard. We were expecting
+$2 groups of numbers seperated by dots, like: 127.0.0.1
+Are you absolutely sure you want to use the address $1?
+
+EOF
+    dialog --title "WARNING" --yesno "`cat $TMP/tempmsg`" 9 72
+    if [ $? = 0 ]; then
+      RET_CODE = 0;
+    fi
+    rm -r $TMP/tempmsg
+  else
+    if [ "$3" = "ECHO" ]; then
+      echo $RET_CODE;
+    fi
+  fi
+  return $RET_CODE;
+}
+
+# Figure out where we are...  cheap hack.
+if [ ! -e etc/slackware-version -a ! -e /etc/installer -a ! -e bin/bash ]; then
+  cd /
+fi;
+
+# IMPORTANT!!! NO LEADING '/' in the paths below, or this script will not
+# function from the bootdisk.
+RC=etc/rc.d/rc.inet1.conf		# Where rc.inet1.conf file is.
+RESOLV=etc/resolv.conf			# Where resolv.conf file is.
+HOSTS=etc/hosts			 	# Where hosts file is.
+ETCNETWORKS=etc/networks		# Where networks file is.
+USE_DHCP=""                             # Use DHCP?  "" == no.
+DHCP_HOSTNAME=""                        # This is our DHCP hostname.
+#
+# defaults:
+NETWORK=127.0.0.0
+IPADDR=127.0.0.1
+NETMASK=255.255.255.0
+
+
+# Main loop:
+while [ 0 ]; do
+cat << EOF > $TMP/tempmsg
+First, we'll need the name you'd like to give your host.
+Only the base hostname is needed right now. (not the domain)
+
+Enter hostname:
+EOF
+ dialog --title "ENTER HOSTNAME" --inputbox "`cat $TMP/tempmsg`" 11 65 \
+ $HOSTNM 2> $TMP/SeThost
+ if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/SeThost $TMP/tempmsg
+  exit
+ fi
+ HOSTNM="`cat $TMP/SeThost`"
+ rm -f $TMP/SeThost $TMP/tempmsg
+ if [ ! "$HOSTNM" = "" ]; then
+  break;
+ fi
+done
+
+while [ 0 ]; do
+cat << EOF > $TMP/tempmsg
+Now, we need the domain name for this machine, such as:
+
+example.org
+
+Do not supply a leading '.'
+
+Enter domain name for $HOSTNM: 
+EOF
+ dialog --title "ENTER DOMAINNAME FOR '$HOSTNM'" --inputbox \
+"`cat $TMP/tempmsg`" \
+14 64 $DOMAIN 2> $TMP/SeTdom
+ if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/SeTdom $TMP/tempmsg
+  exit
+ fi
+ DOMAIN="`cat $TMP/SeTdom`"
+ rm -f $TMP/SeTdom $TMP/tempmsg
+ if [ ! "$DOMAIN" = "" ]; then
+  break;
+ fi
+done
+
+echo $HOSTNM.$DOMAIN > etc/HOSTNAME
+
+dialog --title "SETUP IP ADDRESS FOR '$HOSTNM.$DOMAIN'" \
+--default-item DHCP \
+--menu \
+"Now we need to know how your machine connects to the network.\n\
+If you have an internal network card and an assigned IP address, gateway, \
+and DNS, use the 'static IP' choice to enter these values.  If your IP \
+address is assigned by a DHCP server (commonly used by cable modem and DSL \
+services), select 'DHCP'.  If you do not have a network card, select \
+the 'loopback' choice.  'loopback' is also the correct choice if your \
+only connection to the network will be through a serial modem \
+(with SLIP or PPP), or if you are using a laptop network card (these \
+are configured in /etc/pcmcia/). What type of network connection \
+best describes your machine?" 20 70 3 \
+"static IP" "Use a static IP address to configure ethernet" \
+"DHCP" "Use a DHCP server to configure ethernet" \
+"loopback" "Set up a loopback connection (modem or no net)" 2> $TMP/reply
+if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/reply
+  exit
+fi
+REPLY=`cat $TMP/reply`
+rm -f $TMP/reply
+
+if [ "$REPLY" = "DHCP" ]; then
+  USE_DHCP="yes"
+  dialog --title "SET DHCP HOSTNAME"  --inputbox "Some network providers require \
+that the DHCP hostname be set in order to connect.  If so, they'll have assigned \
+a hostname to your machine, which may look something like CC-NUMBER-A (this \
+depends on your ISP).  If you were assigned a DHCP hostname, please enter it \
+below.  If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
+2> $TMP/SeTDHCPHOST
+  NEW_DHCPHOST="`cat $TMP/SeTDHCPHOST`"
+  rm -f $TMP/SeTDHCPHOST
+  # OK, if we actually got something, use it.
+  DHCP_HOSTNAME="$NEW_DHCPHOST"
+elif [ "$REPLY" = "loopback" ]; then
+  LOOPBACK="yes"
+else
+  LOOPBACK="no"
+fi
+
+if [ "$LOOPBACK" = "no" -a ! "$USE_DHCP" = "yes" ]; then
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTIP ]; then
+   IPADDR=`cat $TMP/SeTIP`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter your IP address for the local machine.  Example: 
+111.112.113.114
+Enter IP address for $HOSTNM (aaa.bbb.ccc.ddd): 
+EOF
+  dialog --title "ENTER IP ADDRESS FOR '$HOSTNM.$DOMAIN'" --inputbox \
+"`cat $TMP/tempmsg`" \
+10 68 $IPADDR 2> $TMP/SeTlip
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTlip $TMP/tempmsg
+   exit
+  fi
+  IPADDR="`cat $TMP/SeTlip`"
+  rm -f $TMP/SeTlip $TMP/tempmsg
+  if [ "$IPADDR" = "" ]; then
+   continue;
+  fi
+  syntax_check_color $IPADDR 4 WARN
+  if [ $? = 0 ]; then
+   echo $IPADDR > $TMP/SeTIP
+   break;
+  fi
+ done
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTnetmask ]; then
+   NETMASK=`cat $TMP/SeTnetmask`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter your netmask.  This will generally look something
+like this: 255.255.255.0
+Enter netmask (aaa.bbb.ccc.ddd):
+EOF
+  dialog --title "ENTER NETMASK FOR LOCAL NETWORK" --inputbox \
+"`cat $TMP/tempmsg`" \
+10 65 $NETMASK 2> $TMP/SeTnmask
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTnmask $TMP/tempmsg
+   exit
+  fi
+  NETMASK="`cat $TMP/SeTnmask`"
+  rm -f $TMP/SeTnmask $TMP/tempmsg
+  if [ "$NETMASK" = "" ]; then
+   continue;
+  fi
+  syntax_check_color $NETMASK 4 WARN
+  if [ $? = 0 ]; then
+   echo $NETMASK > $TMP/SeTnetmask
+   break;
+  fi
+ done
+ 
+ # Set broadcast/network addresses automatically:
+ BROADCAST=`ipmask $NETMASK $IPADDR | cut -f 1 -d ' '`
+ NETWORK=`ipmask $NETMASK $IPADDR | cut -f 2 -d ' '`
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTgateway ]; then
+   GATEWAY=`cat $TMP/SeTgateway`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter the address for the gateway on your network, such as:
+`echo $IPADDR | cut -f 1-3 -d .`.1
+
+If you don't have a gateway on your network just hit ENTER
+without entering a gateway IP address.
+
+Enter gateway address (aaa.bbb.ccc.ddd):
+EOF
+  dialog --title "ENTER GATEWAY ADDRESS" --inputbox "`cat $TMP/tempmsg`" \
+  14 64 $GATEWAY 2> $TMP/SeTgate
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTgate $TMP/tempmsg
+   exit
+  fi
+  GATEWAY="`cat $TMP/SeTgate`"
+  rm -f $TMP/SeTgate $TMP/tempmsg
+  if [ "$GATEWAY" = "" ]; then
+    echo > $TMP/SeTgateway
+    break;
+  fi
+  syntax_check_color $GATEWAY 4 WARN
+  if [ $? = 0 ]; then
+    echo $GATEWAY > $TMP/SeTgateway
+    break;
+  fi
+ done
+fi
+
+if [ "$LOOPBACK" = "no" ]; then
+ dialog --title "USE A NAMESERVER?" --yesno "Will you be accessing a \
+nameserver?" 5 42
+ if [ $? = 0 ]; then
+  if [ ! "`cat $TMP/SeTns 2> /dev/null`" = "" ]; then
+    DNSSAMPLE="`cat $TMP/SeTns 2> /dev/null`"
+  elif [ "$GATEWAY" = "" ]; then
+    DNSSAMPLE=`echo $IPADDR | cut -f 1-3 -d .`
+  else
+    DNSSAMPLE=$GATEWAY
+  fi
+  while [ "$NAMESERVER" = "" ]; do
+   cat << EOF > $TMP/tempmsg
+Here is your current IP address, full hostname, and base hostname:
+$IPADDR       $HOSTNM.$DOMAIN    $HOSTNM
+
+Please give the IP address of the name server to use,
+such as $DNSSAMPLE.
+
+You can add more Domain Name Servers later by editing /$RESOLV.
+
+Primary name server to use (aaa.bbb.ccc.ddd): 
+EOF
+   dialog --title "SELECT NAMESERVER" --inputbox \
+"`cat $TMP/tempmsg`" 17 72 $DNSSAMPLE 2> $TMP/SeTns
+   if [ $? = 1 -o $? = 255 ]; then
+    rm -f $TMP/tempmsg $TMP/SeTns 
+    break
+   fi
+   NAMESERVER="`cat $TMP/SeTns`"
+   rm -f $TMP/tempmsg $TMP/SeTns 
+  done
+ fi
+fi
+
+# Check for existing network driver:
+unset DONOTPROBE
+if cat /proc/net/dev | grep eth0 1> /dev/null 2> /dev/null ; then
+  DONOTPROBE=true 
+fi
+
+# Really, this rc.netdevice thing is mostly obsolete except for
+# handmade local scripts anyway, these days with udev...
+# So, we'll skip it:
+DONOTPROBE=true
+
+if [ -d lib/modules/`uname -r` \
+     -a ! "$LOOPBACK" = "yes" \
+     -a ! -x etc/rc.d/rc.hotplug \
+     -a ! "$DONOTPROBE" = "true" \
+     -a ! -r /cardfound ]; then
+  dialog --title "PROBE FOR NETWORK CARD?" --menu "If you like, we \
+can look to see what kind of network card you have in your machine, and \
+if we find one create an /etc/rc.d/rc.netdevice script to load the module \
+for it at boot time.  There's a slight bit of danger that the probing \
+can cause problems, but it almost always works.  If you'd rather configure \
+your system manually, you can skip the probing process and edit \
+/etc/rc.d/rc.modules or /etc/modules.conf later to have it load the right module." \
+16 68 2 \
+"probe" "look for network cards to set up" \
+"skip" "skip probe;  edit /etc/rc.d/rc.modules later" 2> $TMP/reply
+  if [ $? = 1 -o $? = 255 ]; then
+    rm -f $TMP/reply
+    exit
+  fi
+  REPLY=`cat $TMP/reply`
+  rm -f $TMP/reply
+  if [ ! "$REPLY" = "skip" ]; then
+    for card in 3c59x 82596 dgrs eepro100 e1000 epic100 hp100 lance \
+    ne2k-pci olympic pcnet32 rcpci 8139too 8139cp tlan tulip via-rhine \
+    yellowfin natsemi ; do
+      chroot . /sbin/modprobe $card 2> /dev/null
+      if [ $? = 0 ]; then
+        dialog --title "CARD DETECTED" --msgbox "A networking card using \
+the $card.o module has been detected." 5 72
+        echo "$card" > /cardfound
+        break;
+      fi
+     done
+     if [ ! -r /cardfound ]; then
+       # Don't probe for com20020, because it doesn't check and will always load.
+       # Don't probe for arlan, because it needs irq= to work.
+       # Don't probe for com90io or com90xx because they taint the kernel.
+       for card in depca ibmtr 3c359 3c501 3c503 3c505 3c507 3c509 3c515 ac3200 \
+         abyss acenic at1700 cosa cs89x0 de4x5 de600 \
+         de620 dmfe dl2k e2100 eepro eexpress eth16i ewrk3 fealnx hamachi hostess_sv11 \
+         hp-plus hp lanstreamer ni5010 ni52 ni65 ns83820 sb1000 sealevel sis900 sk98lin skfp smc-ultra \
+         smc9194 smctr starfire sungem sunhme tg3 wd e100 iph5526 lp486e tmspci winbond-840 ; do
+         chroot . /sbin/modprobe $card 2> /dev/null
+         if [ $? = 0 ]; then
+           dialog --title "CARD DETECTED" --msgbox "A networking card using \
+the $card.o module has been detected." 5 72
+           echo "$card" > /cardfound
+           break
+         fi
+       done
+     fi
+     if [ ! -r /cardfound ]; then
+       dialog --title "NO CARD DETECTED" --msgbox "Sorry, but no network \
+card could be probed for on your system.  Some cards (like non-PCI NE2000s) \
+must be supplied with the I/O address to use and can't be probed for safely. \
+You'll have to try to configure the card later by editing \
+/etc/rc.d/rc.modules or recompiling your kernel." 9 70
+     fi
+  fi
+fi
+
+if [ "$LOOPBACK" = "yes" ]; then
+  dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
+system is now configured to use loopback:
+
+IP address: 127.0.0.1
+Netmask: 255.255.255.0
+
+Is this correct?  Press 'Yes' to continue, or 'No' to reconfigure." 0 0
+  RETVAL=$?
+elif [ "$USE_DHCP" = "" ]; then
+  while [ 0 ]; do
+    dialog --title "CONFIRM NETWORK SETUP" \
+--ok-label Accept \
+--extra-label Edit \
+--cancel-label Restart \
+--inputmenu \
+"These are the settings you have entered.  To accept them and complete \
+the networking setup, press enter.  If you need to make any changes, you \
+can do that now (or reconfigure later using 'netconfig')." \
+22 60 12 \
+"Hostname:" "$HOSTNM" \
+"Domain name:" "$DOMAIN" \
+"IP address:" "$IPADDR" \
+"Netmask:" "$NETMASK" \
+"Gateway:" "$GATEWAY" \
+"Nameserver:" "$NAMESERVER" 2> $TMP/tempmsg
+    RETVAL=$?
+    if [ "$RETVAL" = "3" ]; then
+      FIELD=`cat $TMP/tempmsg | cut -f 1 -d : | cut -f 2- -d ' '`
+      NEWVAL=`cat $TMP/tempmsg | cut -f 2 -d : | cut -f 2- -d ' '`
+      if [ "$FIELD" = "Hostname" ]; then
+        HOSTNM=$NEWVAL
+      elif [ "$FIELD" = "Domain name" ]; then
+        DOMAIN=$NEWVAL
+      elif [ "$FIELD" = "IP address" ]; then
+        IPADDR=$NEWVAL
+      elif [ "$FIELD" = "Netmask" ]; then
+        NETMASK=$NEWVAL
+      elif [ "$FIELD" = "Gateway" ]; then
+        GATEWAY=$NEWVAL
+      elif [ "$FIELD" = "Nameserver" ]; then
+        NAMESERVER=$NEWVAL
+      fi
+    else
+      break
+    fi
+  done
+else # DHCP was used
+  dialog --title "CONFIRM SETUP COMPLETE" \
+--yesno "Your networking system is now configured to use DHCP:
+
+  Hostname:     $HOSTNM
+  Domain name:  $DOMAIN
+  IP address:   (use DHCP server)
+  Netmask:      (use DHCP server)
+  Gateway:      (use DHCP server)
+  Nameserver:   (use DHCP server)
+
+Is this correct?  Press 'Yes' to continue, or 'No' to reconfigure." 0 0
+  RETVAL=$?
+fi
+
+if [ "$RETVAL" = "0" ]; then
+  echo $HOSTNM.$DOMAIN > etc/HOSTNAME
+  write_config_files
+  if [ "$1" = "" ]; then
+    dialog --msgbox "Settings accepted.  Basic network configuration is complete." 6 40
+  fi
+else
+  if [ "$1" = "" ]; then
+    dialog --msgbox "Settings discarded.  Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
+  fi
+fi
+
+exit $RETVAL
+