Thu May 31 04:55:33 UTC 201820180531045533

a/kernel-generic-4.14.47-x86_64-1.txz:  Upgraded.
a/kernel-huge-4.14.47-x86_64-1.txz:  Upgraded.
  SCSI_DPT_I2O m -> y
  SCSI_ISCI m -> y (thanks to wael_h)
a/kernel-modules-4.14.47-x86_64-1.txz:  Upgraded.
a/pkgtools-15.0-noarch-14.txz:  Rebuilt.
  installpkg: rarely, an uncompressed size that's not quite to the next level
  (e.g., 1020K) will exceed the expected length and cause a --terse line to
  be one character longer than --terselength. Chop lines to --terselength
  before outputting them. The trailing ']' might be dropped, but no big deal.
ap/slackpkg-2.83.0-noarch-1.txz:  Upgraded.
  Release 2.83.0; thanks to orbea, Didier Spaier, burdi01, David Allen,
  Eduard Rozenberg, and Stuart Winter for various fixes and enhancements.
  Allow using vimdiff to compare .new and original files
  Numerous fixups for alternate $ROOT
  .new config files are sorted so that display order should be consistent
  among multiple machines
  Abort operation if system date is near epoch (mostly relevant for ARM
  machines and others with no RTC)
  Update Slackware ARM gpg key
  Update Slackware ARM mirror list
  No longer offer to run lilo - simply advise user that the kernel image has
  changed and give advice, but also require a keypress to (hopefully) confirm
  that the message was actually read
  mandoc lint fixes to slackpkg.8
  Warn user if a -current mirror is selected (but only warn once)
d/git-2.17.1-x86_64-1.txz:  Upgraded.
d/kernel-headers-4.14.47-x86-1.txz:  Upgraded.
d/rust-1.26.1-x86_64-1.txz:  Upgraded.
k/kernel-source-4.14.47-noarch-1.txz:  Upgraded.
l/fftw-3.3.8-x86_64-1.txz:  Upgraded.
l/imagemagick-6.9.9_48-x86_64-1.txz:  Upgraded.
n/network-scripts-15.0-noarch-8.txz:  Rebuilt.
  Allow setting an interface in promiscuous mode; this is needed for networking
  to function properly in containers
  Fixup setting of IPALIASES (allow non /32 masks; not only is the /32 mask not
  required and even undesirable in some cases, this makes ipv6 support easier
  to integrate (and Darren is working on that as well)
  Thanks to Darren Austin.
n/stunnel-5.46-x86_64-1.txz:  Upgraded.
n/ulogd-2.0.7-x86_64-2.txz:  Rebuilt.
  Fixed empty logrotate file.
x/xorg-server-1.20.0-x86_64-2.txz:  Rebuilt.
  Patched to fix nouveau segfault. Thanks to Rod3775 for the patch.
x/xorg-server-xephyr-1.20.0-x86_64-2.txz:  Rebuilt.
x/xorg-server-xnest-1.20.0-x86_64-2.txz:  Rebuilt.
x/xorg-server-xvfb-1.20.0-x86_64-2.txz:  Rebuilt.
xap/network-manager-applet-1.8.12-x86_64-2.txz:  Rebuilt.
  Patched crash bug. Thanks to gmgf.
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

1 files changed, 0 insertions, 165 deletions

diff --git a/source/n/network-scripts/0003-netconfig-typos-and-set-NM-default.diff b/source/n/network-scripts/0003-netconfig-typos-and-set-NM-default.diff
deleted file mode 100644
index cd6bf2cc3..000000000
--- a/source/n/network-scripts/0003-netconfig-typos-and-set-NM-default.diff
+++ /dev/null
@@ -1,165 +0,0 @@
---- ./netconfig.orig	2018-02-21 21:21:31.000000000 -0600
-+++ ./netconfig	2018-04-12 14:07:10.137023035 -0500
-@@ -11,7 +11,7 @@
- #
- 
- # If we're doing loopback, we don't want 127.0.0.1 and 255.255.255.0 in
--# rc.inet1.conf... it's better to leave the values null.  However, since
-+# rc.inet1.conf... it's better to leave the values null. However, since
- # we use the IP in other places, we need to make a copy for here.
- RCIPCOPY=$IPADDR
- RCMASKCOPY=$NETMASK
-@@ -68,7 +68,7 @@
- # Default gateway IP address:
- GATEWAY="$GATEWAY"
- 
--# Change this to "yes" for debugging output to stdout.  Unfortunately,
-+# Change this to "yes" for debugging output to stdout. Unfortunately,
- # /sbin/hotplug seems to disable stdout so you'll only see debugging output
- # when rc.inet1 is called directly.
- DEBUG_ETH_UP="no"
-@@ -103,8 +103,8 @@
- #VIRTIFUSER[1]="someuser"
- #VIRTIFGROUP[1]="somegroup"
- 
--## Example config information for wlan0.  Uncomment the lines you need and fill
--## in your data.  (You may not need all of these for your wireless network)
-+## Example config information for wlan0. Uncomment the lines you need and fill
-+## in your data. (You may not need all of these for your wireless network)
- #IFNAME[4]="wlan0"
- #IPADDR[4]=""
- #NETMASK[4]=""
-@@ -173,7 +173,7 @@
- /bin/cat <<EOF >$ETCNETWORKS
- #
- # networks	This file describes a number of netname-to-address
--#		mappings for the TCP/IP subsystem.  It is mostly
-+#		mappings for the TCP/IP subsystem. It is mostly
- #		used at boot time, when no name servers are running.
- #
- 
-@@ -192,14 +192,14 @@
- /bin/cat << EOF > $HOSTS
- #
- # hosts		This file describes a number of hostname-to-address
--#		mappings for the TCP/IP subsystem.  It is mostly
-+#		mappings for the TCP/IP subsystem. It is mostly
- #		used at boot time, when no name servers are running.
- #		On small systems, this file can be used instead of a
- #		"named" name server.  Just add the names, addresses
- #		and any aliases to this file...
- #
- # By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
--# should NEVER be named with the name of the machine.  It causes problems
-+# should NEVER be named with the name of the machine. It causes problems
- # for some (stupid) programs, irc and reputedly talk. :^)
- #
- 
-@@ -362,16 +362,21 @@
- 
- # Write the hostname with domain to /etc/HOSTNAME:
- echo $HOSTNM.$DOMAIN > etc/HOSTNAME
-+## OBSOLETE with recent NetworkManager:
-+## Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
-+#if [ -w etc/NetworkManager/NetworkManager.conf ]; then
-+#  sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
-+#fi
- 
- dialog --title "CONFIGURATION TYPE FOR '$HOSTNM.$DOMAIN'" \
----default-item DHCP \
-+--default-item NetworkManager \
- --menu \
- "Now we need to know how your machine connects to the network.\n\
- If you have an internal network card and an assigned IP address, gateway, \
--and DNS, use the 'static IP' choice to enter these values.  If your IP \
-+and DNS, use the 'static IP' choice to enter these values. If your IP \
- address is assigned by a DHCP server (commonly used by cable modem and DSL \
--services), select 'DHCP'.  If you do not have a network card, select \
--the 'loopback' choice.  You may also select 'NetworkManager' if you would \
-+services), select 'DHCP'. If you do not have a network card, select \
-+the 'loopback' choice. You may also select 'NetworkManager' if you would \
- like to have the NetworkManager daemon automatically handle your wired and \
- wireless network interfaces (this is simple and usually works). \
- Which type of network setup would you like?"  20 70 4 \
-@@ -389,10 +394,10 @@
- if [ "$REPLY" = "DHCP" ]; then
-   USE_DHCP="yes"
-   dialog --title "SET DHCP HOSTNAME"  --inputbox "Some network providers require \
--that the DHCP hostname be set in order to connect.  If so, they'll have assigned \
-+that the DHCP hostname be set in order to connect. If so, they'll have assigned \
- a hostname to your machine, which may look something like CC-NUMBER-A (this \
--depends on your ISP).  If you were assigned a DHCP hostname, please enter it \
--below.  If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
-+depends on your ISP). If you were assigned a DHCP hostname, please enter it \
-+below. If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
- 2> $TMP/SeTDHCPHOST
-   NEW_DHCPHOST="`cat $TMP/SeTDHCPHOST`"
-   rm -f $TMP/SeTDHCPHOST
-@@ -442,7 +447,7 @@
-    NETMASK=`cat $TMP/SeTnetmask`
-   fi
-   cat << EOF > $TMP/tempmsg
--Enter your netmask.  This will generally look something
-+Enter your netmask. This will generally look something
- like this: 255.255.255.0
- Enter netmask (aaa.bbb.ccc.ddd):
- EOF
-@@ -556,8 +561,8 @@
-   dialog --title "PROBE FOR NETWORK CARD?" --menu "If you like, we \
- can look to see what kind of network card you have in your machine, and \
- if we find one create an /etc/rc.d/rc.netdevice script to load the module \
--for it at boot time.  There's a slight bit of danger that the probing \
--can cause problems, but it almost always works.  If you'd rather configure \
-+for it at boot time. There's a slight bit of danger that the probing \
-+can cause problems, but it almost always works. If you'd rather configure \
- your system manually, you can skip the probing process and edit \
- /etc/rc.d/rc.modules or /etc/modules.conf later to have it load the right module." \
- 16 68 2 \
-@@ -601,7 +606,7 @@
-      fi
-      if [ ! -r /cardfound ]; then
-        dialog --title "NO CARD DETECTED" --msgbox "Sorry, but no network \
--card could be probed for on your system.  Some cards (like non-PCI NE2000s) \
-+card could be probed for on your system. Some cards (like non-PCI NE2000s) \
- must be supplied with the I/O address to use and can't be probed for safely. \
- You'll have to try to configure the card later by editing \
- /etc/rc.d/rc.modules or recompiling your kernel." 9 70
-@@ -621,11 +626,11 @@
- elif [ "$LOOPBACK" = "yes" -a "$NETWORKMANAGER" = "yes" ]; then
-   dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
- system is now configured to use NetworkManager for
--wired and wireless network management.  To set up wireless networks
-+wired and wireless network management. To set up wireless networks
- and view status, add the Network Management control panel widget to
- your KDE desktop.
- 
--Is this correct?  Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
-+Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
-   RETVAL=$?
- elif [ "$USE_DHCP" = "" ]; then
-   while [ 0 ]; do
-@@ -634,8 +639,8 @@
- --extra-label Edit \
- --cancel-label Restart \
- --inputmenu \
--"These are the settings you have entered.  To accept them and complete \
--the networking setup, press enter.  If you need to make any changes, you \
-+"These are the settings you have entered. To accept them and complete \
-+the networking setup, press enter. If you need to make any changes, you \
- can do that now (or reconfigure later using 'netconfig')." \
- 22 60 12 \
- "Hostname:" "$HOSTNM" \
-@@ -692,11 +697,11 @@
-     chmod 755 etc/rc.d/rc.networkmanager
-   fi
-   if [ "$1" = "" ]; then
--    dialog --msgbox "Settings accepted.  Basic network configuration is complete." 6 40
-+    dialog --msgbox "Settings accepted. Basic network configuration is complete." 6 40
-   fi
- else
-   if [ "$1" = "" ]; then
--    dialog --msgbox "Settings discarded.  Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
-+    dialog --msgbox "Settings discarded. Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
-   fi
- fi
-