Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

10 files changed, 874 insertions, 0 deletions

diff --git a/source/n/bluez-utils/60-bluetooth.rules b/source/n/bluez-utils/60-bluetooth.rules
new file mode 100644
index 000000000..0957225fd
--- /dev/null
+++ b/source/n/bluez-utils/60-bluetooth.rules
@@ -0,0 +1,35 @@
+# Brain Boxes BL-620 Bluetooth Adapter
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="Brain Boxes", SYSFS{prod_id2}=="Bluetooth PC Card", ENV{HCIOPTS}="bboxes", RUN+="bluetooth_serial"
+
+# Xircom CreditCard Bluetooth Adapter
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="Xircom", SYSFS{prod_id3}=="CBT", ENV{HCIOPTS}="xircom", RUN+="bluetooth_serial"
+
+# Xircom RealPort2 Bluetooth Adapter
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="Xircom", SYSFS{prod_id3}=="CBT", ENV{HCIOPTS}="xircom", RUN+="bluetooth_serial"
+
+# IBM Bluetooth PC Card II
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="IBM", SYSFS{prod_id2}=="Bluetooth PC Card II", ENV{HCIOPTS}="tdk", RUN+="bluetooth_serial"
+
+# TDK Bluetooth PC Card
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="TDK", SYSFS{prod_id2}=="Bluetooth PC Card II", ENV{HCIOPTS}="tdk", RUN+="bluetooth_serial"
+
+# AmbiCom BT2000C Bluetooth PC/CF Card
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="AmbiCom BT2000C", SYSFS{prod_id2}=="Bluetooth PC/CF Card", ENV{HCIOPTS}="bt2000c", RUN+="bluetooth_serial"
+
+# COM One Platinium Bluetooth PC Card
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="COM1 SA", SYSFS{prod_id2}=="MC310 CARD", ENV{HCIOPTS}="comone", RUN+="bluetooth_serial"
+
+# Sphinx PICO Card
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="SPHINX", SYSFS{prod_id2}=="BT-CARD", ENV{HCIOPTS}="picocard", RUN+="bluetooth_serial"
+
+# H-Soft blue+Card
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="H-Soft", SYSFS{prod_id2}=="Blue+CARD", ENV{HCIOPTS}="$sysfs{manf_id},$sysfs{card_id}", RUN+="bluetooth_serial"
+
+# Compaq iPAQ Bluetooth Sleeve, Belkin F8T020, any other muppet who used an OXCF950 and didn't bother to program it appropriately.
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="CF CARD", SYSFS{prod_id2}=="GENERIC", ENV{HCIOPTS}="$sysfs{manf_id},$sysfs{card_id}", RUN+="bluetooth_serial"
+
+# Zoom Bluetooth Card and Sitecom CN-504 Card
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="PCMCIA", SYSFS{prod_id2}=="Bluetooth Card", ENV{HCIOPTS}="zoom", RUN+="bluetooth_serial"
+
+# CC&C BT0100M
+SUBSYSTEM=="tty", BUS=="pcmcia", SYSFS{prod_id1}=="Bluetooth BT0100M", ENV{HCIOPTS}="bcsp 115200", RUN+="bluetooth_serial"
diff --git a/source/n/bluez-utils/README.SLACKWARE b/source/n/bluez-utils/README.SLACKWARE
new file mode 100644
index 000000000..795c8c5a2
--- /dev/null
+++ b/source/n/bluez-utils/README.SLACKWARE
@@ -0,0 +1,18 @@
+PIN (or passkey) management
+---------------------------
+since bluez 3.0 the old pin_helper script has been replaced by
+the dbus interface.  To add a default passkey for every outgoing
+request (e.g. the old /etc/bluetooth/pin file) drop it into
+/etc/bluetooth/passkeys/default. (e.g. echo -n "1234" >
+/etc/bluetooth/passkeys/default )
+To add a passkey for a specific outgoing connection replace default
+with the device's address. ( /etc/bluetooth/passkeys/aa:bb:cc:dd:ee:ff
+will contain passkey for aa:bb:cc:dd:ee:ff ).
+After adding a passkey you should restart bluetooth with
+
+/etc/init.d/bluetooth restart
+
+and the new passkeys will be registered.
+
+
+(This behaviour has been copied from Debian)
diff --git a/source/n/bluez-utils/add-passkey.c b/source/n/bluez-utils/add-passkey.c
new file mode 100644
index 000000000..b9dcbb517
--- /dev/null
+++ b/source/n/bluez-utils/add-passkey.c
@@ -0,0 +1,394 @@
+/*
+ *  add-passkey.c:
+ *  registers as an agent for the bluez bluetooth linux stack, the code is
+ *  shamelessly stolen from bluez source found at http://bluez.sf.net
+ *
+ *  BlueZ - Bluetooth protocol stack for Linux
+ *
+ *  Copyright (C) 2005-2006  Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <getopt.h>
+#include <string.h>
+
+#include <dbus/dbus.h>
+
+#define INTERFACE "org.bluez.Security"
+
+// FIXME assumption
+#define PASSKEYMAXLENGTH 255
+
+static char *passkey = NULL;
+static char *address = NULL;
+
+static volatile sig_atomic_t __io_canceled = 0;
+static volatile sig_atomic_t __io_terminated = 0;
+
+static void sig_term(int sig)
+{
+	__io_canceled = 1;
+}
+
+static DBusHandlerResult agent_filter(DBusConnection *conn,
+						DBusMessage *msg, void *data)
+{
+	const char *name, *old, *new;
+
+	if (!dbus_message_is_signal(msg, DBUS_INTERFACE_DBUS, "NameOwnerChanged"))
+		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+
+	if (!dbus_message_get_args(msg, NULL,
+			DBUS_TYPE_STRING, &name, DBUS_TYPE_STRING, &old,
+				DBUS_TYPE_STRING, &new, DBUS_TYPE_INVALID)) {
+		fprintf(stderr, "Invalid arguments for NameOwnerChanged signal");
+		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+	}
+
+	if (!strcmp(name, "org.bluez") && *new == '\0') {
+		__io_terminated = 1;
+	}
+
+	return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+}
+
+static DBusHandlerResult request_message(DBusConnection *conn,
+						DBusMessage *msg, void *data)
+{
+	DBusMessage *reply;
+	const char *path, *address;
+
+	if (!passkey)
+		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+
+	if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_STRING, &path,
+			DBUS_TYPE_STRING, &address, DBUS_TYPE_INVALID)) {
+		fprintf(stderr, "Invalid arguments for passkey Request method");
+		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+	}
+
+	reply = dbus_message_new_method_return(msg);
+	if (!reply) {
+		fprintf(stderr, "Can't create reply message\n");
+		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+	}
+
+	dbus_message_append_args(reply, DBUS_TYPE_STRING, &passkey,
+					DBUS_TYPE_INVALID);
+
+	dbus_connection_send(conn, reply, NULL);
+
+	dbus_connection_flush(conn);
+
+	dbus_message_unref(reply);
+
+	return DBUS_HANDLER_RESULT_HANDLED;
+}
+
+static DBusHandlerResult release_message(DBusConnection *conn,
+						DBusMessage *msg, void *data)
+{
+	DBusMessage *reply;
+
+	if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_INVALID)) {
+		fprintf(stderr, "Invalid arguments for passkey Release method");
+		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+	}
+
+	reply = dbus_message_new_method_return(msg);
+	if (!reply) {
+		fprintf(stderr, "Can't create reply message\n");
+		return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+	}
+
+	dbus_message_append_args(reply, DBUS_TYPE_INVALID);
+
+	dbus_connection_send(conn, reply, NULL);
+
+	dbus_connection_flush(conn);
+
+	dbus_message_unref(reply);
+
+	if (!__io_canceled)
+		fprintf(stderr, "Passkey service has been released\n");
+
+	__io_terminated = 1;
+
+	return DBUS_HANDLER_RESULT_HANDLED;
+}
+
+static DBusHandlerResult agent_message(DBusConnection *conn,
+						DBusMessage *msg, void *data)
+{
+	if (dbus_message_is_method_call(msg, "org.bluez.PasskeyAgent", "Request"))
+		return request_message(conn, msg, data);
+
+	if (dbus_message_is_method_call(msg, "org.bluez.PasskeyAgent", "Release"))
+		return release_message(conn, msg, data);
+
+	return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
+}
+
+static const DBusObjectPathVTable agent_table = {
+	.message_function = agent_message,
+};
+
+static int register_agent(DBusConnection *conn, const char *agent_path,
+				const char *remote_address, int use_default)
+{
+	DBusMessage *msg, *reply;
+	DBusError err;
+	const char *path, *method, *address = remote_address;
+
+	if (!dbus_connection_register_object_path(conn, agent_path,
+							&agent_table, NULL)) {
+		fprintf(stderr, "Can't register path object path for agent\n");
+		return -1;
+	}
+
+	if (use_default) {
+		path = "/org/bluez";
+		method = "RegisterDefaultPasskeyAgent";
+	} else {
+		path = "/org/bluez/hci0";
+		method = "RegisterPasskeyAgent";
+	}
+
+	msg = dbus_message_new_method_call("org.bluez", path, INTERFACE, method);
+	if (!msg) {
+		fprintf(stderr, "Can't allocate new method call\n");
+		return -1;
+	}
+
+	if (use_default)
+		dbus_message_append_args(msg, DBUS_TYPE_STRING, &agent_path,
+							DBUS_TYPE_INVALID);
+	else
+		dbus_message_append_args(msg, DBUS_TYPE_STRING, &agent_path,
+				DBUS_TYPE_STRING, &address, DBUS_TYPE_INVALID);
+
+	dbus_error_init(&err);
+
+	reply = dbus_connection_send_with_reply_and_block(conn, msg, -1, &err);
+
+	dbus_message_unref(msg);
+
+	if (!reply) {
+		fprintf(stderr, "Can't register passkey agent\n");
+		if (dbus_error_is_set(&err)) {
+			fprintf(stderr, "%s\n", err.message);
+			dbus_error_free(&err);
+		}
+		return -1;
+	}
+
+	dbus_message_unref(reply);
+
+	dbus_connection_flush(conn);
+
+	return 0;
+}
+
+static int unregister_agent(DBusConnection *conn, const char *agent_path,
+				const char *remote_address, int use_default)
+{
+	DBusMessage *msg, *reply;
+	DBusError err;
+	const char *path, *method, *address = remote_address;
+
+	if (use_default) {
+		path = "/org/bluez";
+		method = "UnregisterDefaultPasskeyAgent";
+	} else {
+		path = "/org/bluez/hci0";
+		method = "UnregisterPasskeyAgent";
+	}
+
+	msg = dbus_message_new_method_call("org.bluez", path, INTERFACE, method);
+	if (!msg) {
+		fprintf(stderr, "Can't allocate new method call\n");
+		dbus_connection_close(conn);
+		exit(1);
+	}
+
+	if (use_default)
+		dbus_message_append_args(msg, DBUS_TYPE_STRING, &agent_path,
+							DBUS_TYPE_INVALID);
+	else
+		dbus_message_append_args(msg, DBUS_TYPE_STRING, &agent_path,
+				DBUS_TYPE_STRING, &address, DBUS_TYPE_INVALID);
+
+	dbus_error_init(&err);
+
+	reply = dbus_connection_send_with_reply_and_block(conn, msg, -1, &err);
+
+	dbus_message_unref(msg);
+
+	if (!reply) {
+		fprintf(stderr, "Can't unregister passkey agent\n");
+		if (dbus_error_is_set(&err)) {
+			fprintf(stderr, "%s\n", err.message);
+			dbus_error_free(&err);
+		}
+		return -1;
+	}
+
+	dbus_message_unref(reply);
+
+	dbus_connection_flush(conn);
+
+	dbus_connection_unregister_object_path(conn, agent_path);
+
+	return 0;
+}
+
+static void usage(void)
+{
+//	printf("Bluetooth passkey agent ver %s\n\n", VERSION);
+
+	printf("Usage:\n"
+		"\tadd-passkey [--passkey-fd n] [--default] [--path agent-path] [address]\n"
+        "\n"
+        "add-passkey will read from passkey-fd (default: stdin) adding a default passkey\n"
+        "if --default is given, or for a specific address if supplied on commandline.\n\n"
+        "--default or address are mandatory.\n"
+        "this program is based on bluez passkey-agent.c from http://bluez.sf.net\n"
+		"\n");
+}
+
+static struct option main_options[] = {
+    { "passkey-fd", 1, 0, 'f'},
+	{ "default",	0, 0, 'd' },
+	{ "path",	1, 0, 'p' },
+	{ "help",	0, 0, 'h' },
+	{ 0, 0, 0, 0 }
+};
+
+int main(int argc, char *argv[])
+{
+	struct sigaction sa;
+	DBusConnection *conn;
+	char match_string[128], default_path[128], *agent_path = NULL;
+	int opt, use_default = 0, passkey_fd = 0;
+    char *tmppasskey;
+
+	snprintf(default_path, sizeof(default_path),
+				"/org/bluez/passkey_agent_%d", getpid());
+
+	while ((opt = getopt_long(argc, argv, "+fdp:h", main_options, NULL)) != EOF) {
+		switch(opt) {
+        case 'f':
+            passkey_fd = atoi(optarg);
+		case 'd':
+			use_default = 1;
+			break;
+		case 'p':
+			if (optarg[0] != '/') {
+				fprintf(stderr, "Invalid path\n");
+				exit(1);
+			}
+			agent_path = strdup(optarg);
+			break;
+		case 'h':
+			usage();
+			exit(0);
+		default:
+			exit(1);
+		}
+	}
+
+	argc -= optind;
+	argv += optind;
+	optind = 0;
+    
+	if (argc < 1 && !use_default) {
+		usage();
+		exit(1);
+	}
+  
+    passkey = malloc(PASSKEYMAXLENGTH * sizeof(char));
+
+    if (!read(passkey_fd, passkey, PASSKEYMAXLENGTH)) {
+        fprintf(stderr, "Unable to read passkey from fd %d\n", passkey_fd);
+        exit(1);
+    }
+    
+    if (tmppasskey = index(passkey, '\n')) {
+        *tmppasskey = '\0'; 
+    }
+
+    address = (argc > 0) ? strdup(argv[0]) : NULL;
+
+	if (!use_default && !address) {
+		usage();
+		exit(1);
+	}
+
+	if (!agent_path)
+		agent_path = strdup(default_path);
+
+	conn = dbus_bus_get(DBUS_BUS_SYSTEM, NULL);
+	if (!conn) {
+		fprintf(stderr, "Can't get on system bus");
+		exit(1);
+	}
+
+	if (register_agent(conn, agent_path, address, use_default) < 0) {
+		dbus_connection_close(conn);
+		exit(1);
+	}
+
+	if (!dbus_connection_add_filter(conn, agent_filter, NULL, NULL))
+		fprintf(stderr, "Can't add signal filter");
+
+	snprintf(match_string, sizeof(match_string),
+			"interface=%s,member=NameOwnerChanged,arg0=%s",
+					DBUS_INTERFACE_DBUS, "org.bluez");
+
+	dbus_bus_add_match(conn, match_string, NULL);
+
+	memset(&sa, 0, sizeof(sa));
+	sa.sa_flags   = SA_NOCLDSTOP;
+	sa.sa_handler = sig_term;
+	sigaction(SIGTERM, &sa, NULL);
+	sigaction(SIGINT,  &sa, NULL);
+
+	while (!__io_canceled && !__io_terminated) {
+		if (dbus_connection_read_write_dispatch(conn, 100) != TRUE)
+			break;
+	}
+
+	if (!__io_terminated)
+		unregister_agent(conn, agent_path, address, use_default);
+
+	if (passkey)
+		free(passkey);
+
+	dbus_connection_close(conn);
+
+	return 0;
+}
diff --git a/source/n/bluez-utils/bluetooth.conf b/source/n/bluez-utils/bluetooth.conf
new file mode 100644
index 000000000..c0476237a
--- /dev/null
+++ b/source/n/bluez-utils/bluetooth.conf
@@ -0,0 +1,24 @@
+<!-- This configuration file specifies the required security policies
+     for Bluetooth core daemon to work. -->
+
+<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+
+  <!-- ../system.conf have denied everything, so we just punch some holes -->
+
+  <policy user="root">
+    <allow own="org.bluez"/>
+    <allow send_destination="org.bluez"/>
+    <allow send_interface="org.bluez.Agent"/>
+  </policy>
+
+  <policy at_console="true">
+    <allow send_destination="org.bluez"/>
+  </policy>
+
+  <policy context="default">
+    <deny send_destination="org.bluez"/>
+  </policy>
+
+</busconfig>
diff --git a/source/n/bluez-utils/bluez-utils.SlackBuild b/source/n/bluez-utils/bluez-utils.SlackBuild
new file mode 100755
index 000000000..7f8b95746
--- /dev/null
+++ b/source/n/bluez-utils/bluez-utils.SlackBuild
@@ -0,0 +1,188 @@
+#!/bin/sh
+#
+# SlackBuild for bluez-utils
+# http://www.bluez.org
+# By SukkoPera <enjoy.the.silence@iol.it>
+# Thanks a lot to CAT for his Slackware package cration
+# guide (http://www.slacky.it/misto/tutorial/spunleashed.txt)
+#
+# Check out
+# - http://www.sukkopera.tk
+# - http://www.slacky.it
+# - http://www.nyft.org
+#
+# Notes:
+# - Many files and the whole PIN management system have been stolen from the
+#   Debian package. Thanks.
+#
+# Rewritten for Slackware 2007-05  <pjv>
+
+NAME=bluez-utils
+VERSION=${VERSION:-3.36}
+ARCH=${ARCH:-x86_64}
+NUMJOBS=${NUMJOBS:-" -j7 "}
+BUILD=${BUILD:-7}
+
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$NAME
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+mkdir -p $PKG/etc/rc.d \
+  $PKG/etc/bluetooth/passkeys \
+  $PKG/usr/lib${LIBDIRSUFFIX}/bluetooth
+# Is there any reason for a non-root user to be able to see these?
+chmod 700 $PKG/etc/bluetooth/passkeys
+cd $TMP
+rm -rf $NAME-$VERSION
+tar xvf $CWD/${NAME}-${VERSION}.tar.bz2 || exit 1
+cd $NAME-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --localstatedir=/var \
+  --enable-tools\
+  --enable-bccmd \
+  --enable-hid2hci \
+  --enable-dfutool \
+  --enable-hidd \
+  --enable-pand \
+  --enable-dund \
+  --enable-cups \
+  --enable-manpages \
+  --enable-configfiles \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG
+
+mkdir -p $PKG/lib/udev
+cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1
+chmod 755 $PKG/lib/udev/bluetooth_serial
+
+mkdir -p $PKG/lib/udev/rules.d
+cp -a scripts/bluetooth.rules $PKG/lib/udev/rules.d/60-bluetooth.rules || exit 1
+chmod 644 $PKG/lib/udev/rules.d/60-bluetooth.rules
+
+# This appears to be gone/obsolete:
+#if [ ! -e $PKG/etc/bluetooth/transfer.service ]; then
+#  cat transfer/transfer.service > $PKG/etc/bluetooth/transfer.service
+#fi
+#if [ ! -e $PKG/usr/lib${LIBDIRSUFFIX}/bluetooth/bluetoothd-service-transfer -a -e transfer/bluetoothd-service-transfer ]; then
+#  cat transfer/bluetoothd-service-transfer > $PKG/usr/lib${LIBDIRSUFFIX}/bluetooth/bluetoothd-service-transfer
+#  chmod 755 $PKG/usr/lib${LIBDIRSUFFIX}/bluetooth/bluetoothd-service-transfer
+#fi
+
+# Install Debian's add-passkey program:
+DEBDEST=/usr/lib${LIBDIRSUFFIX}/bluetooth
+gcc $(pkg-config --libs --cflags dbus-1) -DDBUS_API_SUBJECT_TO_CHANGE \
+	$CWD/add-passkey.c -o $PKG/$DEBDEST/add-passkey || exit 1
+cp $CWD/register-passkeys $PKG/$DEBDEST
+if [ "$ARCH" = "x86_64" ]; then
+  sed -i "s,/usr/lib/,/usr/lib${LIBDIRSUFFIX}/,g" $PKG/$DEBDEST/register-passkeys
+fi
+chmod a+x $PKG/$DEBDEST/*
+
+# Default PIN (wow, does this seem insecure!)
+#echo "1234" > $PKG/etc/bluetooth/passkeys/default
+touch $PKG/etc/bluetooth/passkeys/default
+
+mkdir -p $PKG/usr/doc/$NAME-$VERSION
+cp -a \
+  AUTHORS ChangeLog COPYING* INSTALL NEWS README $CWD/README.SLACKWARE \
+  $PKG/usr/doc/$NAME-$VERSION
+( cd $PKG/etc/bluetooth
+  ln -sf /usr/doc/$NAME-$VERSION/README.SLACKWARE .
+)
+
+# Arrange init scripts and config files:
+CONF=/etc/rc.d/rc.bluetooth.conf
+mkdir -p $PKG/etc/rc.d
+cp $CWD/rc.bluetooth $PKG/etc/rc.d/rc.bluetooth
+if [ "$ARCH" = "x86_64" ]; then
+  sed -i "s,/usr/lib/,/usr/lib${LIBDIRSUFFIX}/,g" $PKG/etc/rc.d/rc.bluetooth
+fi
+cp -a $CWD/rc.bluetooth.conf $PKG/etc/rc.d/rc.bluetooth.conf
+sed -i "s:\(HIDD_ENABLE=\).*:\1false:" $PKG/$CONF || exit 1
+sed -i "s:\(HID2HCI_ENABLE=\).*:\1false:" $PKG/$CONF || exit 1
+
+mkdir -p $PKG/etc/bluetooth
+cp -a audio/audio.conf $PKG/etc/bluetooth
+cp -a audio/asound.conf $PKG/etc/bluetooth
+cp -a input/input.conf $PKG/etc/bluetooth
+cp -a hcid/hcid.conf $PKG/etc/bluetooth
+cp -a network/network.conf $PKG/etc/bluetooth
+cp -a rfcomm/rfcomm.conf $PKG/etc/bluetooth
+chmod 644 $PKG/etc/bluetooth/*.conf
+
+# Do not overwrite configuration
+# Well, let the dbus file be overwritten, as it is not usually user-edited.
+( cd $PKG
+  for file in \
+    etc/bluetooth/audio.conf \
+    etc/asound.conf \
+    etc/bluetooth/asound.conf \
+    etc/bluetooth/input.conf \
+    etc/bluetooth/hcid.conf \
+    etc/bluetooth/network.conf \
+    etc/bluetooth/rfcomm.conf \
+    etc/bluetooth/passkeys/default \
+    etc/rc.d/rc.bluetooth \
+    etc/rc.d/rc.bluetooth.conf ; do
+      mv ${file} ${file}.new
+  done
+)
+
+# Replace the bluetooth.conf file with one from BlueZ4 that works with the newest dbus:
+cat $CWD/bluetooth.conf > $PKG/etc/dbus-1/system.d/bluetooth.conf
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$NAME-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/bluez-utils/doinst.sh b/source/n/bluez-utils/doinst.sh
new file mode 100644
index 000000000..e738d14bd
--- /dev/null
+++ b/source/n/bluez-utils/doinst.sh
@@ -0,0 +1,30 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+if [ ! -e etc/rc.d/rc.bluetooth -o ! -x etc/rc.d/rc.bluetooth ]; then
+  chmod 644 etc/rc.d/rc.bluetooth.new
+else
+  chmod 755 etc/rc.d/rc.bluetooth.new
+fi
+config etc/rc.d/rc.bluetooth.new
+config etc/rc.d/rc.bluetooth.conf.new
+config etc/bluetooth/asound.conf.new
+config etc/bluetooth/audio.conf.new
+config etc/bluetooth/hcid.conf.new
+config etc/bluetooth/input.conf.new
+config etc/bluetooth/network.conf.new
+config etc/bluetooth/rfcomm.conf.new
+config etc/bluetooth/passkeys/default.new
+
+if [ ! -e etc/asound.conf ]; then
+  ( cd etc ; ln -sf bluetooth/asound.conf . )
+fi
diff --git a/source/n/bluez-utils/rc.bluetooth b/source/n/bluez-utils/rc.bluetooth
new file mode 100644
index 000000000..cf891dcf9
--- /dev/null
+++ b/source/n/bluez-utils/rc.bluetooth
@@ -0,0 +1,114 @@
+#!/bin/sh
+#
+# Start/stop the Bluetooth daemons
+#
+# This version has been modified by SukkoPera, taking inspiration from then
+# Debian init script, to add support for register-passkeys.  Modified by
+# Patrick Volkerding to add "restart" support, and cleaned up a tiny bit.
+
+set -e
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+DESC="Bluetooth subsystem"
+
+# The register-passkeys script was originally written by Debian:
+REGISTER_PASSKEYS=/usr/lib/bluetooth/register-passkeys
+
+HCID_NAME=hcid
+HIDD_NAME=hidd
+HID2HCI_NAME=hid2hci
+RFCOMM_NAME=rfcomm
+PAND_NAME=pand
+DUND_NAME=dund
+
+HCID_EXEC="`which $HCID_NAME || true`"
+HIDD_EXEC="`which $HIDD_NAME || true`"
+HID2HCI_EXEC="`which $HID2HCI_NAME || true`"
+RFCOMM_EXEC="`which $RFCOMM_NAME || true`"
+PAND_EXEC="`which $PAND_NAME || true`"
+DUND_EXEC="`which $DUND_NAME || true`"
+
+HCID_CONFIG="/etc/bluetooth/hcid.conf"
+RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"
+
+# Source rc.bluetooth.conf
+. /etc/rc.d/rc.bluetooth.conf
+
+bluetooth_start() {
+        echo -n "Starting $DESC: "
+        if [ -x "$HIDD_EXEC" ] ; then
+                if $HIDD_ENABLE && [ -x "$HIDD_EXEC" -a -n "$HIDD_OPTIONS" ] ; then
+                        $HIDD_EXEC $HIDD_OPTIONS || true
+                        echo -n " $HIDD_NAME"
+                fi
+        else
+                echo "BlueZ does not appear to be installed!"
+                exit
+        fi
+        # Separate sdp daemon is depreciated, now internal function.
+        if $SDPD_ENABLE ; then
+                $HCID_EXEC -s -f $HCID_CONFIG
+                echo -n " $HCID_NAME sdp"
+        else
+                $HCID_EXEC -f $HCID_CONFIG
+                echo -n " $HCID_NAME"
+        fi
+        if $HID2HCI_ENABLE && [ -x "$HID2HCI_EXEC" ] ; then
+                $HID2HCI_EXEC --tohci > /dev/null 2>&1 || true
+                echo -n " $HID2HCI_NAME"
+        fi
+        if $RFCOMM_ENABLE && [ -x "$RFCOMM_EXEC" -a -f "$RFCOMM_CONFIG" ] ; then
+                $RFCOMM_EXEC -f $RFCOMM_CONFIG bind all || true
+                echo -n " $RFCOMM_NAME"
+        fi
+        if $DUND_ENABLE && [ -x "$DUND_EXEC" -a -n "$DUND_OPTIONS" ] ; then
+                $DUND_EXEC $DUND_OPTIONS
+                echo -n " $DUND_NAME"
+        fi
+        if $PAND_ENABLE && [ -x "$PAND_EXEC" -a -n "$PAND_OPTIONS" ] ; then
+                $PAND_EXEC $PAND_OPTIONS
+                echo -n " $PAND_NAME"
+        fi
+        if [ -x $REGISTER_PASSKEYS ]; then
+                $REGISTER_PASSKEYS
+                echo -n " passkeys"
+        fi
+        echo "."
+}
+
+bluetooth_stop() {
+        echo -n "Stopping $DESC: "
+        killall $PAND_NAME > /dev/null 2>&1 || true
+        echo -n " $PAND_NAME"
+        killall $DUND_NAME > /dev/null 2>&1 || true
+        echo -n " $DUND_NAME"
+        if [ -x "$RFCOMM_EXEC" ] ; then
+                $RFCOMM_EXEC release all > /dev/null 2>&1 || true
+                echo -n " $RFCOMM_NAME"
+        fi
+        killall $HIDD_NAME > /dev/null 2>&1 || true
+        echo -n " $HIDD_NAME"
+        killall $HCID_NAME > /dev/null 2>&1 || true
+        echo -n " $HCID_NAME"
+        echo "."
+}
+
+case "$1" in
+  start)
+        bluetooth_start
+	;;
+  stop)
+        bluetooth_stop
+	;;
+  restart)
+        bluetooth_stop
+        sleep 1
+        bluetooth_start
+        ;;
+  *)
+	echo "Usage: $0 start|stop|restart" >&2
+	exit 1
+	;;
+esac
+
+exit 0
diff --git a/source/n/bluez-utils/rc.bluetooth.conf b/source/n/bluez-utils/rc.bluetooth.conf
new file mode 100644
index 000000000..09df405fb
--- /dev/null
+++ b/source/n/bluez-utils/rc.bluetooth.conf
@@ -0,0 +1,33 @@
+# /etc/rc.d/rc.bluetooth.conf
+#
+# This file contains the configuration for the Bluetooth subsystem, BlueZ.
+
+# The lines below allow you to configure which BlueZ daemons will be started,
+# along with any daemon-specific options.
+
+# Allowed values for each (unless otherwise noted) are "true" and "false"
+
+# =============================================================================
+
+# The SDP daemon allows clients to detect supported Bluetooth services
+SDPD_ENABLE=true
+
+# The HID daemon supports Bluetooth Human Interface Devices
+HIDD_ENABLE=false
+HIDD_OPTIONS="--server"
+
+# This switches your Bluetooth device into HCI mode, use this if your input
+# device does not support Bluetooth HID
+HID2HCI_ENABLE=false
+
+# The RFCOMM daemon is used to simulate serial connections over Bluetooth
+RFCOMM_ENABLE=true
+
+# The DUN daemon is used for Dial Up Networking over Bluetooth
+DUND_ENABLE=false
+DUND_OPTIONS="--listen --persist --msdun call dun"
+
+# The PAN daemon is used to setup a Bluetooth network.
+PAND_ENABLE=false
+PAND_OPTIONS="--listen --role NAP"
+
diff --git a/source/n/bluez-utils/register-passkeys b/source/n/bluez-utils/register-passkeys
new file mode 100644
index 000000000..f57042c3c
--- /dev/null
+++ b/source/n/bluez-utils/register-passkeys
@@ -0,0 +1,19 @@
+#!/bin/bash
+# register every passkey found in $PASSKEYS_DIR
+
+PASSKEYS_DIR="/etc/bluetooth/passkeys/"
+PASSKEY_AGENT="/usr/lib/bluetooth/add-passkey"
+
+cd $PASSKEYS_DIR
+
+for f in $(ls -1 ${PASSKEYS_DIR}); do
+    if [ ! -r "$f" ]; then continue; fi
+
+    # default passkey
+    if [ "$f" == "default" ]; then
+        cat "$f" | $PASSKEY_AGENT --default > /dev/null 2>&1 &
+    # specific passkey
+    elif echo "$f" | egrep -q '([0-9a-fA-F]{1,2}:){5}[0-9a-fA-F]{1,2}'; then
+        cat "$f" | $PASSKEY_AGENT "$f" > /dev/null 2>&1 &
+    fi
+done
diff --git a/source/n/bluez-utils/slack-desc b/source/n/bluez-utils/slack-desc
new file mode 100644
index 000000000..159f02466
--- /dev/null
+++ b/source/n/bluez-utils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+bluez-utils: bluez-utils (Utilities for working with Bluetooth(TM))
+bluez-utils:
+bluez-utils: The bluez-utils package contains utilities for supporting
+bluez-utils: Bluetooth(TM) on Linux.
+bluez-utils:
+bluez-utils: For more info, visit:  http://www.bluez.org
+bluez-utils:
+bluez-utils:
+bluez-utils:
+bluez-utils:
+bluez-utils: