Fri Jul 27 21:01:22 UTC 201820180727210122

Hey folks, my first order of business here needs to be a huge thank you to
everyone who has donated at https://paypal.me/volkerdi to help keep this
project going. As most of you are already aware by now, the financal situation
here at Slackware HQ has not been great for many years, including not getting
any pay for the last two years and forcing me (and my family) to live very
frugally while I continued to work on the project hoping I'd figure out a way
to actually monitize it by the time that Slackware 15.0 is ready for release.
I'm not trying to cast any blame regarding the situation. Really, I can only
blame myself for not trying to build my own ship years ago when things began
to not really work out. I'm still looking into sustainable funding options
such as Patreon or Liberapay (or perhaps both), and I'm open to other ideas.
I'm no longer in immediate danger of going broke, and I'm no longer
entertaining the notion of joining my friends at the local potato chip factory
in order to pay my bills. :) My family is grateful and humbled by the support
we've received. Hope we'll be able to keep this project going for a long time.
Also, I realize that the website lacks updates and needs attention and I will
need to find some time to devote to that. I've never been much of a website
designer, and the slackware.com site is basically left over from work done by
former Walnut Creek / BSDi employees. I've never seen able to make much sense
of the SQL backend. The interface to edit and post articles is clunky (and
I'm not sure the PHP for that even works any more). When I've posted articles
in recent years, I've done so by editing the main page already processed from
PHP into HTML, which is pretty darn messy as I'm sure you can imagine. I tend
to prioritize the distribution itself over other demands on my time - that's
clearly a lot to do with how things ended up the way they did.
So, I guess that's the report for now. Lots more work to do and not enough
time to do it in... that part I don't see changing moving forward. :)
Thanks very much again. I'll do my best to keep you all posted.
  - Pat
a/file-5.34-x86_64-1.txz:  Upgraded.
a/kernel-firmware-20180727_b01151b-noarch-1.txz:  Upgraded.
a/kernel-generic-4.14.58-x86_64-1.txz:  Upgraded.
a/kernel-huge-4.14.58-x86_64-1.txz:  Upgraded.
a/kernel-modules-4.14.58-x86_64-1.txz:  Upgraded.
d/gcc-8.2.0-x86_64-1.txz:  Upgraded.
d/gcc-brig-8.2.0-x86_64-1.txz:  Upgraded.
d/gcc-g++-8.2.0-x86_64-1.txz:  Upgraded.
d/gcc-gfortran-8.2.0-x86_64-1.txz:  Upgraded.
d/gcc-gnat-8.2.0-x86_64-1.txz:  Upgraded.
d/gcc-go-8.2.0-x86_64-1.txz:  Upgraded.
d/gcc-objc-8.2.0-x86_64-1.txz:  Upgraded.
d/kernel-headers-4.14.58-x86-1.txz:  Upgraded.
d/libtool-2.4.6-x86_64-9.txz:  Rebuilt.
  Recompiled to update embedded GCC version number.
k/kernel-source-4.14.58-noarch-1.txz:  Upgraded.
   CRASH_DUMP n -> y
   KEXEC n -> y
  +KEXEC_JUMP y
  +PROC_VMCORE y
l/babl-0.1.54-x86_64-1.txz:  Upgraded.
l/gegl-0.4.6-x86_64-1.txz:  Upgraded.
l/libart_lgpl-2.3.21-x86_64-2.txz:  Removed.
  This actually hasn't been needed by any Slackware package since koffice in
  KDE3, and this particular version won't work with the Trinity Desktop
  Environment, which is essentially a fork of KDE 3.5 updated to compile and
  run with modern libraries and development tools. I can't see much point in
  keeping it around. Thanks to _gin.
n/NetworkManager-1.12.2-x86_64-1.txz:  Upgraded.
n/dhcpcd-7.0.7-x86_64-1.txz:  Upgraded.
x/libinput-1.11.3-x86_64-1.txz:  Upgraded.
extra/tigervnc/tigervnc-1.9.0-x86_64-1.txz:  Upgraded.
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

2 files changed, 0 insertions, 123 deletions

diff --git a/source/l/libart_lgpl/libart_lgpl.SlackBuild b/source/l/libart_lgpl/libart_lgpl.SlackBuild
deleted file mode 100755
index 1e587ff83..000000000
--- a/source/l/libart_lgpl/libart_lgpl.SlackBuild
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-
-# Copyright 2008, 2009, 2010, 2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-cd $(dirname $0) ; CWD=$(pwd)
-
-PKGNAM=libart_lgpl
-VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
-# the name of the created package would be, and then exit. This information
-# could be useful to other scripts.
-if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
-  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
-  exit 0
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-libart_lgpl
-rm -rf $PKG
-mkdir -p $TMP $PKG/usr
-
-if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-cd $TMP
-rm -rf libart_lgpl-$VERSION
-tar xvf $CWD/libart_lgpl-$VERSION.tar.?z* || exit 1
-cd libart_lgpl-$VERSION
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --build=$ARCH-slackware-linux || exit 1
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-# Don't ship .la files:
-rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-mkdir -p $PKG/usr/doc/libart_lgpl-$VERSION
-cp -a \
-  AUTHORS COPYING* NEWS README* \
-  $PKG/usr/doc/libart_lgpl-$VERSION
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/libart_lgpl-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/source/l/libart_lgpl/slack-desc b/source/l/libart_lgpl/slack-desc
deleted file mode 100644
index 6f406483c..000000000
--- a/source/l/libart_lgpl/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
-           |-----handy-ruler------------------------------------------------------|
-libart_lgpl: libart_lgpl (graphics library)
-libart_lgpl:
-libart_lgpl: Libart is a library for high-performance 2D graphics. It is used by
-libart_lgpl: both KDE and GNOME. This is the LGPL'd component of the library.
-libart_lgpl:
-libart_lgpl: Raph Levien <raph@acm.org> is the author of libart.
-libart_lgpl:
-libart_lgpl:
-libart_lgpl:
-libart_lgpl:
-libart_lgpl: