Fri Nov 12 19:19:46 UTC 202120211112191946

a/kernel-generic-5.15.2-x86_64-1.txz:  Upgraded.
a/kernel-huge-5.15.2-x86_64-1.txz:  Upgraded.
a/kernel-modules-5.15.2-x86_64-1.txz:  Upgraded.
a/sysvinit-scripts-15.0-noarch-7.txz:  Rebuilt.
  rc.M: adjust the startup order to make sure a few services are running when
  needed (such as MariaDB for dovecot and postfix). Thanks to Tshane.
ap/ksh93-20211112_d160abc-x86_64-1.txz:  Upgraded.
  Don't assume that /bin/sh mode is desired when ksh is run from su.
  Thanks to McDutchie.
ap/lxc-4.0.11-x86_64-2.txz:  Rebuilt.
  Move the bash-completion symlinks to the system directory. Thanks to kaott.
d/kernel-headers-5.15.2-x86-1.txz:  Upgraded.
k/kernel-source-5.15.2-noarch-1.txz:  Upgraded.
l/pipewire-0.3.40-x86_64-1.txz:  Upgraded.
n/s-nail-14.9.23-x86_64-1.txz:  Upgraded.
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

1 files changed, 0 insertions, 501 deletions

diff --git a/source/installer/usbimg2disk.sh b/source/installer/usbimg2disk.sh
deleted file mode 100644
index df3f574fc..000000000
--- a/source/installer/usbimg2disk.sh
+++ /dev/null
@@ -1,501 +0,0 @@
-#!/bin/bash
-# $Id: usbimg2disk.sh,v 1.23 2012/09/03 20:52:31 eha Exp eha $
-#
-# Copyright 2009, 2010, 2011, 2012  Eric Hameleers, Eindhoven, NL
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Paranoid as usual:
-set -e
-
-# Define some variables ahead of time, so that cleanup knows about them:
-MNTDIR1=""
-MNTDIR2=""
-MNTDIR3=""
-
-# Clean up in case of failure:
-cleanup() {
-  # Clean up by unmounting our loopmounts, deleting tempfiles:
-  echo "--- Cleaning up the staging area..."
-  sync
-  [ ! -z "${MNTDIR1}" ] && ( umount -f ${MNTDIR1} ; rmdir $MNTDIR1 )
-  [ ! -z "${MNTDIR2}" ] && ( umount -f ${MNTDIR2} ; rmdir $MNTDIR2 )
-  [ ! -z "${MNTDIR3}" ] && rm -rf ${MNTDIR3} || true
-}
-trap 'echo "*** $0 FAILED at line $LINENO ***"; cleanup; exit 1' ERR INT TERM
-
-showhelp() {
-  echo "# "
-  echo "# Purpose #1: to use the content of Slackware's usbboot.img and"
-  echo "#   transform a standard USB thumb drive with a single vfat partition"
-  echo "#   into a bootable medium containing the Slackware Linux installer."
-  echo "# "
-  echo "# Purpose #2: to use the contents of a Slackware directory tree"
-  echo "#   and transform a standard USB thumb drive with"
-  echo "#   a single vfat partition and 2GB of free space into"
-  echo "#   a self-contained USB installation medium for Slackware Linux."
-  echo "# "
-  echo "# "
-  echo "# Your USB thumb drive may contain data!"
-  echo "# This data will *not* be overwritten, unless you have"
-  echo "#   explicitly chosen to format the drive by using the '-f' parameter."
-  echo "# "
-  echo "# $(basename $0) accepts the following parameters:"
-  echo "#   -h|--help                  This help"
-  echo "#   -f|--format                Format the USB drive before use"
-  echo "#   -i|--infile <filename>     Full path to the usbboot.img file"
-  echo "#   -l|--logfile <filename>    Optional logfile to catch fdisk output"
-  echo "#   -o|--outdev <filename>     The device name of your USB drive"
-  echo "#   -s|--slackdir <dir>        Use 'dir' as the root of Slackware tree"
-  echo "#   -u|--unattended            Do not ask any questions"
-  echo "#   -L|--label <labelname>     FAT label when formatting the USB drive"
-
-  echo "# "
-  echo "# Examples:"
-  echo "# "
-  echo "# $(basename $0) -i ~/download/usbboot.img -o /dev/sdX"
-  echo "# $(basename $0) -f -s /home/ftp/pub/slackware-13.0 -o /dev/sdX"
-  echo "# "
-  echo "# The second example shows how to create a fully functional Slackware"
-  echo "# installer on a USB stick (it needs a Slackware tree as the source)."
-  echo "# "
-}
-
-reformat() {
-  # Commands to re-create a functional USB stick with VFAT partition:
-  # two parameters:
-  #  (1) the name of the USB device to be formatted:
-  #  (2) FAT label to use when formatting the USB device:
-  local TOWIPE="$1"
-  local THELABEL="$2"
-
-  # Sanity checks:
-  if [ ! -b $TOWIPE ]; then
-    echo "*** Not a block device: '$TOWIPE' !"
-    exit 1
-  fi
-
-  # Wipe the MBR:
-  dd if=/dev/zero of=$TOWIPE bs=512 count=1
-
-  # Temporarily accept errors (so that we can examine them):
-  set +e
-
-  # create a FAT32 partition (type 'b')
-  /sbin/fdisk $TOWIPE <<EOF
-n
-p
-1
-
-
-t
-b
-w
-EOF
-
-  # Check if fdisk gave an error (like "error closing file").
-  # Some desktop environments auto-mount the partition on sight...:
-  if [ $? -ne 0 ]; then
-    echo "*** The fdisk command had an error."
-    echo "*** Some desktop environments (KDE, GNOME) may automatically mount"
-    echo "*** the new FAT partition on your USB drive, causing the fdisk error."
-    if [ $UNATTENDED -eq 0 ]; then
-      # if we are running interactively, allow to chicken out now:
-      echo "*** Perhaps you want to format the device '$TOWIPE' yourself first?"
-      read -p "*** Press ENTER to continue anyway or Ctrl-C to quit now: " JUNK
-    fi
-  fi
-
-  # Fail on errors again:
-  set -e
-
-  if mount | grep -q ${TOWIPE}1 ; then
-    echo "--- Un-mounting ${TOWIPE}1 because your desktop auto-mounted it..."
-    umount -f ${TOWIPE}1
-  fi
-
-  # We set the fat label to '$THELABEL' when formatting.
-  # It will enable the installer to mount the fat partition automatically
-  # and pre-fill the correct pathname for the "SOURCE" dialog.
-  # Format with a vfat filesystem:
-  /sbin/mkdosfs -F32 -n ${THELABEL} ${TOWIPE}1
-}
-
-makebootable() {
-  # Only parameter: the name of the USB device to be set bootable:
-  USBDRV="$1"
-
-  # Sanity checks:
-  if [ ! -b $USBDRV ]; then
-    echo "*** Not a block device: '$USBDRV' !"
-    exit 1
-  fi
-
-  # Set the bootable flag for the first partition:
-  /sbin/sfdisk -A $USBDRV 1
-}
-
-# Parse the commandline parameters:
-if [ -z "$1" ]; then
-  showhelp
-  exit 1
-fi
-while [ ! -z "$1" ]; do
-  case $1 in
-    -f|--format)
-      REFORMAT=1
-      shift
-      ;;
-    -h|--help)
-      showhelp
-      exit
-      ;;
-    -i|--infile)
-      USBIMG="$(cd $(dirname $2); pwd)/$(basename $2)"
-      shift 2
-      ;;
-    -l|--logfile)
-      LOGFILE="$(cd $(dirname $2); pwd)/$(basename $2)"
-      shift 2
-      ;;
-    -o|--outdev)
-      TARGET="$2"
-      TARGETPART="${TARGET}1"
-      shift 2
-      ;;
-    -s|--slackdir)
-      REPODIR="$2"
-      FULLINSTALLER="yes"
-      shift 2
-      ;;
-    -u|--unattended)
-      UNATTENDED=1
-      shift
-      ;;
-    -L|--label)
-      CUSTOMLABEL="$2"
-      shift 2
-      ;;
-    *)
-      echo "*** Unknown parameter '$1'!"
-      exit 1
-      ;;
-  esac
-done
-
-# Before we start:
-[ -x /bin/id ] && CMD_ID="/bin/id" || CMD_ID="/usr/bin/id"
-if [ "$($CMD_ID -u)" != "0" ]; then
-  echo "*** You need to be root to run $(basename $0)."
-  exit 1
-fi
-
-# Check existence of the package repository if that was passed as a parameter:
-if [ -n "$REPODIR" ]; then
-  if [ ! -d "$REPODIR" ]; then
-    echo "*** This is not a directory: '$REPODIR' !"
-    exit 1
-  else
-    # This also takes care of stripping a trailing '/', which is required
-    # for the rsync command to work as intended:
-    REPOSROOT="$(cd $(dirname $REPODIR); pwd)/$(basename $REPODIR)"
-  fi
-fi
-
-# Check FAT label:
-if [ -n "${CUSTOMLABEL}" ]; then
-  if [ "x$(echo "${CUSTOMLABEL}"| tr -d '[:alnum:]._-')" != "x" ]; then
-    echo "*** FAT label '${CUSTOMLABEL}' is not an acceptible name!"
-    exit 1
-  elif [ ${#CUSTOMLABEL} -gt 11 ]; then
-    echo "*** FAT label '${CUSTOMLABEL}' must be less than 12 characters!"
-    exit 1
-  else
-  FATLABEL="${CUSTOMLABEL}"
-  fi
-else
-  FATLABEL="USBSLACKINS"
-fi
-
-# Prepare the environment:
-MININSFREE=2200               # minimum in MB required for a Slackware tree
-UNATTENDED=${UNATTENDED:-0}   # unattended means: never ask questions.
-REFORMAT=${REFORMAT:-0}       # do not try to reformat by default
-LOGFILE=${LOGFILE:-/dev/null} # silence by default
-EXCLUDES=${EXCLUDES:-"--exclude=source \
-                      --exclude=extra/aspell-word-lists \
-                      --exclude=isolinux \
-                      --exclude=usb-and-pxe-installers \
-                      --exclude=pasture"}  # not copied onto the stick
-
-# If we have been given a Slackware tree, we will create a full installer:
-if [ -n "$REPOSROOT" ]; then
-  if [ -d "$REPOSROOT" -a -f "$REPOSROOT/PACKAGES.TXT" ]; then
-    USBIMG=${USBIMG:-"$REPOSROOT/usb-and-pxe-installers/usbboot.img"}
-    PKGDIR=$(head -40 $REPOSROOT/PACKAGES.TXT | grep 'PACKAGE LOCATION: ' |head -1 |cut -f2 -d/)
-    if [ -z "$PKGDIR" ]; then
-      echo "*** Could not find the package subdirectory in '$REPOSROOT'!"
-      exit 1
-    fi
-  else
-    echo "*** Directory '$REPOSROOT' does not look like a Slackware tree!"
-    exit 1
-  fi
-fi
-
-# More sanity checks:
-if [ -z "$TARGET" -o -z "$USBIMG" ]; then
-  echo "*** You must specify both the names of usbboot.img and the USB device!"
-  exit 1
-fi
-
-if [ ! -f $USBIMG ]; then
-  echo "*** This is not a useable file: '$USBIMG' !"
-  exit 1
-fi
-
-if [ ! -b $TARGET ]; then
-  echo "*** Not a block device: '$TARGET' !"
-  exit 1
-elif [ $REFORMAT -eq 0 ]; then
-  if ! /sbin/blkid -t TYPE=vfat $TARGETPART 1>/dev/null 2>/dev/null ; then
-    echo "*** I fail to find a 'vfat' partition: '$TARGETPART' !"
-    echo "*** If you want to format the USB thumb drive, add the '-f' parameter"
-    exit 1
-  fi
-fi
-
-if mount | grep -q $TARGETPART ; then
-  echo "*** Please un-mount $TARGETPART first, then re-run this script!"
-  exit 1
-fi
-
-# Do not croak if we have a Slackware tree without sources:
-if [ ! $(readlink -f ${REPOSROOT}/extra/java ) ]; then
-   EXCLUDES="${EXCLUDES} --exclude=extra/java"
-fi
-
-# Check for prerequisites which may not always be installed:
-MISSBIN=0
-MBRBIN="/usr/lib/syslinux/mbr.bin"
-if [ ! -r $MBRBIN ]; then MBRBIN="/usr/share/syslinux/mbr.bin"; fi
-if [ ! -r $MBRBIN -o ! -x /usr/bin/syslinux ]; then
-  echo "*** This script requires that the 'syslinux' package is installed!"
-  MISSBIN=1
-fi
-if [ ! -x /usr/bin/mtools ]; then
-  echo "*** This script requires that the 'floppy' (mtools) package is installed!"
-  MISSBIN=1
-fi
-if [ ! -x /sbin/mkdosfs ]; then
-  echo "*** This script requires that the 'dosfstools' package is installed!"
-  MISSBIN=1
-fi
-if [ ! -x /bin/cpio ]; then
-  echo "*** This script requires that the 'cpio' package is installed!"
-  MISSBIN=1
-fi
-if [ $MISSBIN -eq 1 ]; then exit 1 ; fi
-
-# Show the USB device's information to the user:
-if [ $UNATTENDED -eq 0 ]; then
-  [ $REFORMAT -eq 1 ] && DOFRMT="format and " || DOFRMT="" 
-
-  echo ""
-  echo "# We are going to ${DOFRMT}use this device - '$TARGET':"
-  echo "# Vendor : $(cat /sys/block/$(basename $TARGET)/device/vendor)"
-  echo "# Model  : $(cat /sys/block/$(basename $TARGET)/device/model)"
-  echo "# Size   : $(( $(cat /sys/block/$(basename $TARGET)/size) / 2048)) MB"
-  echo "# "
-  echo "# FDISK OUTPUT:"
-  /sbin/fdisk -l $TARGET | while read LINE ; do echo "# $LINE" ; done
-  echo ""
-
-  echo "***                                                       ***"
-  echo "*** If this is the wrong drive, then press CONTROL-C now! ***"
-  echo "***                                                       ***"
-
-  read -p "Or press ENTER to continue: " JUNK
-  # OK... the user was sure about the drive...
-fi
-
-# Initialize the logfile:
-cat /dev/null > $LOGFILE
-
-# If we need to format the USB drive, do it now:
-if [ $REFORMAT -eq 1 ]; then
-  echo "--- Formatting $TARGET with VFAT partition label '${FATLABEL}'..."
-  if [ $UNATTENDED -eq 0 ]; then
-    echo "--- Last chance! Press CTRL-C to abort!"
-    read -p "Or press ENTER to continue: " JUNK
-  fi
-  ( reformat $TARGET ${FATLABEL} ) 1>>$LOGFILE 2>&1
-else
-  # We do not format the drive, but apply a FAT label if required.
-
-  # Prepare for using mlabel to change the FAT label:
-  MTOOLSRCFILE=$(mktemp -p /tmp -t mtoolsrc.XXXXXX)
-  echo "drive s: file=\"$TARGETPART\"" > $MTOOLSRCFILE
-  echo "mtools_skip_check=1" >> $MTOOLSRCFILE
-
-  if [ -n "$CUSTOMLABEL" ]; then
-    # User gave us a FAT label to use, so we will force that upon the drive:
-    echo "--- Setting FAT partition label to '$FATLABEL'"
-    MTOOLSRC=$MTOOLSRCFILE mlabel s:${FATLABEL}
-  elif [ -n "$(/sbin/blkid -t TYPE=vfat -s LABEL -o export $TARGETPART)" ] ; then
-    # User did not care, but the USB stick has a FAT label that we will use:
-    eval $(/sbin/blkid -t TYPE=vfat -s LABEL -o export $TARGETPART)
-    FATLABEL=$LABEL
-    echo "--- Using current FAT partition label '$FATLABEL'"
-    unset LABEL
-  else
-    # No user-supplied label, nor a drive label present. We apply our default:
-    echo "--- Setting FAT partition label to '$FATLABEL'"
-    MTOOLSRC=$MTOOLSRCFILE mlabel s:${FATLABEL}
-  fi
-
-  # Cleanup:
-  rm -f $MTOOLSRCFILE
-fi
-
-# Create a temporary mount point for the image file:
-mkdir -p /mnt
-MNTDIR1=$(mktemp -d -p /mnt -t img.XXXXXX)
-if [ ! -d $MNTDIR1 ]; then
-  echo "*** Failed to create a temporary mount point for the image!"
-  exit 1
-else
-  chmod 711 $MNTDIR1
-fi
-
-# Create a temporary mount point for the USB thumb drive partition:
-MNTDIR2=$(mktemp -d -p /mnt -t usb.XXXXXX)
-if [ ! -d $MNTDIR2 ]; then
-  echo "*** Failed to create a temporary mount point for the usb thumb drive!"
-  exit 1
-else
-  chmod 711 $MNTDIR2
-fi
-
-# Create a temporary directory to extract the initrd if needed:
-MNTDIR3=$(mktemp -d -p /mnt -t initrd.XXXXXX)
-if [ ! -d $MNTDIR3 ]; then
-  echo "*** Failed to create a temporary directory to extract the initrd!"
-  exit 1
-else
-  chmod 711 $MNTDIR3
-fi
-
-# Mount the image file:
-mount -o loop,ro $USBIMG $MNTDIR1
-
-# Mount the vfat partition:
-mount -t vfat -o shortname=mixed $TARGETPART $MNTDIR2
-
-# Do we have space to create a full Slackware USB install medium?
-if [ "$FULLINSTALLER" = "yes" ]; then
-  if [ $(df --block=1MB $TARGETPART |grep "^$TARGETPART" |tr -s ' ' |cut -f4 -d' ') -le $MININSFREE ]; then
-    echo "*** The partition '$TARGETPART' does not have enough"
-    echo "*** free space (${MININSFREE} MB) to create a Slackware installation medium!"
-    cleanup
-    exit 1
-  fi
-fi
-
-# Check available space for a Slackware USB setup bootdisk:
-USBFREE=$(df -k $TARGETPART |grep "^$TARGETPART" |tr -s ' ' |cut -d' ' -f4)
-IMGSIZE=$(du -k $USBIMG |cut -f1)
-echo "--- Available free space on the the USB drive is $USBFREE KB"
-echo "--- Required free space for installer: $IMGSIZE KB"
-
-# Exit when the installer image's size does not fit in available space:
-if [ $IMGSIZE -gt $USBFREE ]; then
-  echo "*** The USB thumb drive does not have enough free space!"
-  # Cleanup and exit:
-  cleanup
-  exit 1
-fi
-
-if [ $UNATTENDED -eq 0 ]; then
-  # if we are running interactively, warn about overwriting files:
-  if [ -n "$REPOSROOT" ]; then
-    if [ -d $MNTDIR2/syslinux -o -d $MNTDIR2/$(basename $REPOSROOT) ]; then
-      echo "--- Your USB drive contains directories 'syslinux' and/or '$(basename $REPOSROOT)'"
-      echo "--- These will be overwritten.  Press CTRL-C to abort now!"
-      read -p "Or press ENTER to continue: " JUNK
-    fi
-  else
-    if [ -d $MNTDIR2/syslinux ]; then
-      echo "--- Your USB drive contains directory 'syslinux'"
-      echo "--- This will be overwritten.  Press CTRL-C to abort now!"
-      read -p "Or press ENTER to continue: " JUNK
-    fi
-  fi
-fi
-
-# Copy boot image files to the USB disk in its own subdirectory '/syslinux':
-echo "--- Copying boot files to the USB drive..."
-mkdir -p $MNTDIR2/syslinux
-cp -R $MNTDIR1/* $MNTDIR2/syslinux/
-rm -f $MNTDIR2/syslinux/ldlinux.sys
-
-# If we are creating a full Slackware installer, there is a lot more to do:
-if [ "$FULLINSTALLER" = "yes" ]; then
-  # Extract the Slackware initrd for modifications we have to do:
-  echo "--- Extracting Slackware initrd.img..."
-  ( cd ${MNTDIR3}/
-    gunzip -cd ${MNTDIR2}/syslinux/initrd.img | cpio -i -d -H newc --no-absolute-filenames
-  ) 2>>$LOGFILE
-
-  # Modify installer files so that installing from USB stick will be easier:
-  echo "--- Modifying installer files..."
-  ( cd ${MNTDIR3}/
-    # Try to automatically mount the installer partition:
-    mkdir usbinstall
-    echo "mount -t vfat -o ro,shortname=mixed \$(/sbin/blkid -t LABEL=$FATLABEL | cut -f1 -d:) /usbinstall 1>/dev/null 2>&1" >> etc/rc.d/rc.S
-    # Adapt the dialogs so that pressing [OK] will be all there is to it:
-    sed -i -e 's# --menu# --default-item 6 --menu#' usr/lib/setup/SeTmedia
-    sed -i -e "s# 2> \$TMP/sourcedir# /usbinstall/$(basename $REPOSROOT)/$PKGDIR 2> \$TMP/sourcedir#" usr/lib/setup/INSdir
-    FIXF=$(find usr/lib/setup -name SeTp*media)
-    sed -i -e 's# --menu# --default-item 3 --menu#' $FIXF
-  ) 2>>$LOGFILE
-
-  # Recreate the initrd:
-  echo "--- Gzipping the initrd image again:"
-  chmod 0755 ${MNTDIR3}
-  ( cd ${MNTDIR3}/
-    find . |cpio -o -H newc |gzip > ${MNTDIR2}/syslinux/initrd.img
-  ) 2>>$LOGFILE
-
-  # Copy Slackware package tree (no sources) to the USB disk -
-  # we already made sure that ${REPOSROOT} does not end with a '/'
-  echo "--- Copying Slackware package tree to the USB drive..."
-  rsync -rpthDL --delete $EXCLUDES $REPOSROOT $MNTDIR2/
-fi
-
-# Unmount/remove stuff:
-cleanup
-
-# Run syslinux and write a good MBR:
-echo "--- Making the USB drive '$TARGET' bootable..."
-( makebootable $TARGET ) 1>>$LOGFILE 2>&1
-/usr/bin/syslinux -s -d /syslinux $TARGETPART 1>>$LOGFILE 2>&1
-dd if=$MBRBIN of=$TARGET 1>>$LOGFILE 2>&1
-
-# THE END