Wed Jun 6 22:19:01 UTC 201820180606221901

a/bash-4.4.023-x86_64-1.txz:  Upgraded.
a/kernel-firmware-20180604_1fa9ce3-noarch-1.txz:  Upgraded.
a/kernel-generic-4.14.48-x86_64-1.txz:  Upgraded.
a/kernel-huge-4.14.48-x86_64-1.txz:  Upgraded.
a/kernel-modules-4.14.48-x86_64-1.txz:  Upgraded.
ap/cups-2.2.8-x86_64-1.txz:  Upgraded.
ap/ghostscript-fonts-std-8.11-noarch-3.txz:  Rebuilt.
  Rebuilt this and many other font packages or packages with build scripts
  that call mkfontdir or mkfontscale to suppress any error messages caused
  by collisions if another package installation is writing files to the
  same font directories when those utilities are run. In that case, the
  other package will also be running mkfontdir/mkfontscale after the files
  are installed, so any issues will be cleaned up then. Last one out turn
  off the lights, so to speak.
ap/sqlite-3.24.0-x86_64-1.txz:  Upgraded.
ap/terminus-font-4.40-noarch-3.txz:  Rebuilt.
d/kernel-headers-4.14.48-x86-1.txz:  Upgraded.
d/rust-1.26.2-x86_64-1.txz:  Upgraded.
k/kernel-source-4.14.48-noarch-1.txz:  Upgraded.
l/elfutils-0.171-x86_64-1.txz:  Upgraded.
l/harfbuzz-1.7.7-x86_64-1.txz:  Upgraded.
l/mozilla-nss-3.37.3-x86_64-1.txz:  Upgraded.
l/readline-7.0.005-x86_64-1.txz:  Upgraded.
x/dejavu-fonts-ttf-2.37-noarch-4.txz:  Rebuilt.
x/font-adobe-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-adobe-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-100dpi-1.0.4-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-75dpi-1.0.4-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-type1-1.0.4-noarch-3.txz:  Rebuilt.
x/font-arabic-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-lucidatypewriter-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-lucidatypewriter-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-ttf-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-speedo-1.0.2-noarch-3.txz:  Rebuilt.
x/font-bitstream-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-cronyx-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-cursor-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-daewoo-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-dec-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-ibm-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-isas-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-jis-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-micro-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-ethiopic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-meltho-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-misc-1.1.2-noarch-3.txz:  Rebuilt.
x/font-mutt-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-schumacher-misc-1.1.2-noarch-3.txz:  Rebuilt.
x/font-screen-cyrillic-1.0.4-noarch-3.txz:  Rebuilt.
x/font-sony-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-sun-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-winitzki-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-xfree86-type1-1.0.4-noarch-3.txz:  Rebuilt.
x/liberation-fonts-ttf-2.00.1-noarch-3.txz:  Rebuilt.
x/libinput-1.11.0-x86_64-1.txz:  Upgraded.
x/sazanami-fonts-ttf-20040629-noarch-3.txz:  Rebuilt.
x/sinhala_lklug-font-ttf-20060929-noarch-3.txz:  Rebuilt.
x/tibmachuni-font-ttf-1.901b-noarch-3.txz:  Rebuilt.
x/ttf-indic-fonts-0.5.14-noarch-3.txz:  Rebuilt.
x/ttf-tlwg-0.6.4-noarch-3.txz:  Rebuilt.
x/urw-core35-fonts-otf-20170801_91edd6e_git-noarch-2.txz:  Rebuilt.
x/wqy-zenhei-font-ttf-0.8.38_1-noarch-6.txz:  Rebuilt.
xap/mozilla-firefox-60.0.2-x86_64-1.txz:  Upgraded.
  This release contains security fixes and improvements.
  For more information, see:
    https://www.mozilla.org/security/known-vulnerabilities/firefox.html
  (* Security fix *)
xap/x3270-3.3.12ga7-x86_64-5.txz:  Rebuilt.
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

1 files changed, 443 insertions, 0 deletions

diff --git a/source/installer/sources/initrd/usr/lib/setup/setup b/source/installer/sources/initrd/usr/lib/setup/setup
new file mode 100755
index 000000000..f30064a0f
--- /dev/null
+++ b/source/installer/sources/initrd/usr/lib/setup/setup
@@ -0,0 +1,443 @@
+#!/bin/sh
+#
+# Copyright 1993, 1994, 1999  Patrick Volkerding, Moorhead, Minnesota USA
+# Copyright 2001, 2003, 2004  Slackware Linux, Inc., Concord, CA
+# Copyright 2006, 2007, 2018  Patrick Volkerding, Sebeka, Minnesota USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is 
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# As always, bug reports, suggestions, etc: volkerdi@slackware.com
+#
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+# Wipe the probe md5sum to force rescanning partitions if setup is restarted:
+rm -f $TMP/SeTpartition.md5
+## FLOPPY? Comment out this obsolete code. We ain't gonna need it.
+## Use /tmp on floppy for now:
+#/usr/lib/setup/unmigrate.sh
+rm -f $TMP/SeT*
+# If a keymap was set up, restore that data:
+if [ -r $TMP/Pkeymap ]; then
+  cp $TMP/Pkeymap $TMP/SeTkeymap
+fi
+echo "on" > $TMP/SeTcolor # turn on color menus
+PATH="$PATH:/usr/lib/setup"
+export PATH;
+export COLOR=on
+dialog --backtitle "Slackware Linux Setup" --infobox "\n
+Scanning your system for partition information...\n
+\n" 5 55
+# In case the machine is full of fast SSDs:
+sleep 1
+# Before probing, activate any LVM partitions
+# that may exist from before the boot:
+vgchange -ay 1> /dev/null 2> /dev/null
+if probe -l 2> /dev/null | grep -E 'Linux$' 1> /dev/null 2> /dev/null ; then
+ probe -l 2> /dev/null | grep -E 'Linux$' | sort 1> $TMP/SeTplist 2> /dev/null
+else
+ dialog --title "NO LINUX PARTITIONS DETECTED" \
+ --msgbox "There don't seem to be any partitions on this machine of type \
+Linux. You'll need to make at least one of these to install Linux. \
+To do this, you'll need to leave 'setup', and make the partitions using \
+'cfdisk' (MBR partitions) or 'cgdisk' (GPT partitions). For more \
+information, read the 'setup' help file from the next menu." 10 64
+fi
+if [ -d /sys/firmware/efi ]; then
+  if ! probe -l 2> /dev/null | grep "EFI System Partition" 1> /dev/null 2> /dev/null ; then
+     dialog --title "NO EFI SYSTEM PARTITION DETECTED" \
+ --msgbox "This machine appears to be using EFI/UEFI, but no EFI System \
+Partition was found. You'll need to make an EFI System Partition in order \
+to boot from the hard drive. To do this, leave 'setup', and \
+use 'cgdisk' to make a 100MB partition of type EF00. For more information, \
+read the 'setup' help file from the next menu." 10 64
+  fi
+fi
+T_PX="/mnt"
+echo "$T_PX" > $TMP/SeTT_PX
+ROOT_DEVICE="`mount | grep "on / " | cut -f 1 -d ' '`"
+echo "$ROOT_DEVICE" > $TMP/SeTrootdev
+if mount | grep /var/log/mount 1> /dev/null 2> /dev/null ; then # clear source
+ umount /var/log/mount                                          # location
+fi
+# Anything mounted on /var/log/mount now is a fatal error:
+if mount | grep /var/log/mount 1> /dev/null 2> /dev/null ; then
+  echo "Can't umount /var/log/mount. Reboot machine and run setup again."
+  exit
+fi
+# If the mount table is corrupt, the above might not do it, so we will
+# try to detect Linux and FAT32 partitions that have slipped by:
+if [ -d /var/log/mount/lost+found -o -d /var/log/mount/recycled \
+     -o -r /var/log/mount/io.sys ]; then
+  echo "Mount table corrupt. Reboot machine and run setup again."
+  exit
+fi
+rm -f /var/log/mount 2> /dev/null
+rmdir /var/log/mount 2> /dev/null
+mkdir /var/log/mount 2> /dev/null
+
+while [ 0 ]; do
+
+ dialog --title "Slackware Linux Setup (version 12.2)" \
+--menu \
+"Welcome to Slackware Linux Setup.\n\
+Select an option below using the UP/DOWN keys and SPACE or ENTER.\n\
+Alternate keys may also be used: '+', '-', and TAB." 18 72 9 \
+"HELP" "Read the Slackware Setup HELP file" \
+"KEYMAP" "Remap your keyboard if you're not using a US one" \
+"ADDSWAP" "Set up your swap partition(s)" \
+"TARGET" "Set up your target partitions" \
+"SOURCE" "Select source media" \
+"SELECT" "Select categories of software to install" \
+"INSTALL" "Install selected software" \
+"CONFIGURE" "Reconfigure your Linux system" \
+"EXIT" "Exit Slackware Linux Setup" 2> $TMP/hdset
+ if [ ! $? = 0 ]; then
+  rm -f $TMP/hdset $TMP/SeT*
+  exit
+ fi
+ MAINSELECT="`cat $TMP/hdset`"
+ rm $TMP/hdset
+
+ # Start checking what to do. Some modules may reset MAINSELECT to run the
+ # next item in line.
+
+ if [ "$MAINSELECT" = "HELP" ]; then
+  SeTfdHELP
+ fi
+
+ if [ "$MAINSELECT" = "KEYMAP" ]; then
+  SeTkeymap
+  if [ -r $TMP/SeTkeymap ]; then
+   MAINSELECT="ADDSWAP" 
+  fi
+ fi
+ 
+ if [ "$MAINSELECT" = "MAKE TAGS" ]; then
+  SeTmaketag
+ fi
+ 
+ if [ "$MAINSELECT" = "ADDSWAP" ]; then
+  SeTswap
+  if [ -r $TMP/SeTswap ]; then
+   MAINSELECT="TARGET"
+  elif [ -r $TMP/SeTswapskip ]; then
+   # Go ahead to TARGET without swap space:
+   MAINSELECT="TARGET"
+  fi
+ fi
+
+ if [ "$MAINSELECT" = "TARGET" ]; then
+  SeTpartitions
+  SeTEFI
+  SeTDOS
+  if [ -r $TMP/SeTnative ]; then
+   MAINSELECT="SOURCE"
+  fi
+ fi
+
+ if [ "$MAINSELECT" = "SOURCE" ]; then
+  SeTmedia 
+  if [ -r $TMP/SeTsource ]; then
+   MAINSELECT="SELECT"
+  fi
+ fi
+
+ if [ "$MAINSELECT" = "SELECT" ]; then
+  if [ -r /var/log/mount/isolinux/setpkg ]; then
+    sh /var/log/mount/isolinux/setpkg
+  else
+    SeTPKG
+  fi
+  if [ -r $TMP/SeTSERIES ]; then
+   MAINSELECT="INSTALL"
+  fi
+ fi
+
+ if [ "$MAINSELECT" = "INSTALL" ]; then
+  if [ ! -r $TMP/SeTSERIES -o ! -r $TMP/SeTsource -o ! -r $TMP/SeTnative ]; then
+   dialog --title "CANNOT INSTALL SOFTWARE YET" --msgbox "\
+\n\
+Before you can install software, complete the following tasks:\n\
+\n\
+1. Select your source media.\n\
+2. Set up your target Linux partition(s).\n\
+3. Select which software categories to install.\n\
+\n\
+You may also optionally remap your keyboard and set up your\n\
+swap partition(s). \n\
+\n\
+Press ENTER to return to the main menu." 16 68
+   continue
+  fi
+  SERIES="`cat $TMP/SeTSERIES`"
+  SOURCE_DEVICE="`cat $TMP/SeTsource`"
+  IGNORE_TAGFILES=""
+  while [ 0 ]; do
+   dialog --title "SELECT PROMPTING MODE" --default-item "terse" --menu \
+   "Now you must select the type of prompts you'd like to see during the \
+installation process. If you have the drive space, the 'full' option \
+is quick, easy, and by far the most foolproof choice. The 'newbie' \
+mode provides the most information but is much more time-consuming \
+(presenting the packages one by one) than the menu-based choices. \
+Otherwise, you can pick packages from menus \
+using 'expert' or 'menu' mode. Which type of prompting would you like \
+to use?" \
+   20 76 7 \
+   "full" "Install everything (9+ GB of software, RECOMMENDED!)" \
+   "terse" "Like 'full', but display one line per package during install" \
+   "menu" "Choose individual packages from interactive menus" \
+   "expert" "This is actually the same as the \"menu\" option" \
+   "newbie" "Use verbose prompting (the X series takes one year)" \
+   "custom" "Use custom tagfiles in the package directories" \
+   "tagpath" "Use tagfiles in the subdirectories of a custom path" \
+   "help" "Read the prompt mode help file" 2> $TMP/SeTpmode
+   if [ ! $? = 0 ]; then
+    rm -f $TMP/SeTpmode
+    exit
+   fi
+   MODE="`cat $TMP/SeTpmode`"
+   rm -f $TMP/SeTtagext
+   if [ "$MODE" = "help" ]; then
+    dialog --title "PROMPT MODE HELP" --exit-label OK --textbox "/usr/lib/setup/PROMPThelp" 19 65
+   fi
+   if [ "$MODE" = "tagpath" ]; then
+    dialog --title "PROVIDE A CUSTOM PATH TO YOUR TAGFILES" --inputbox \
+    "If you're installing from CD or DVD, it's impossible to edit the \
+tagfiles that are in the package directories. In this case, you might \
+want to provide a path to your custom tagfiles. As an example, you \
+could create a /tagfiles directory and mount a floppy disk containing \
+the tagfiles on that directory. Then you'd enter '/tagfiles' at the \
+prompt below. The setup program will look for your tagfile in \
+SUBDIRECTORIES of the path you provide, such as /tagfiles/a, \
+/tagfiles/ap, /tagfiles/d, and so on. You only need to provide a \
+subdirectory and tagfile for the first disk of each series to be \
+installed. If a custom tagfile is not found at the path you provide, \
+setup will revert to the default tagfiles. Please enter the path to your \
+custom tagfiles:" \
+    19 71 2> $TMP/SeTtagpath
+    if [ ! $? = 0 ]; then
+     continue
+    fi
+    if [ -r $TMP/SeTtagpath ]; then
+     if [ "`cat $TMP/SeTtagpath`" = "" ]; then
+      rm -f $TMP/SeTtagpath
+     elif [ ! -d "$(cat $TMP/SeTtagpath)" ]; then
+       dialog --title "NOT A VALID DIRECTORY" --msgbox \
+"Sorry, but the $(cat $TMP/SeTtagpath) directory could not be located. \
+Press ENTER to go back to the SELECT PROMPTING MODE menu." \
+7 65
+      rm -f $TMP/SeTtagpath
+      continue
+     fi
+    fi
+    break;
+   fi
+   if [ "$MODE" = "newbie" ]; then 
+    dialog --infobox "'newbie' prompt mode selected.  Using default tagfiles \
+and verbose package prompting." 4 50
+    break;
+   fi 
+   if [ "$MODE" = "custom" ]; then
+    dialog --title "ENTER CUSTOM EXTENSION" --inputbox "Now, enter the custom \
+extension you have used for your tagfiles. This must be a valid MS-DOS format \
+file extension consisting of a period followed by three characters. For \
+example, I use '.pat'. You might see my tagfiles on your disks. :^)" \
+12 60 2> $TMP/SeTtagext
+    if [ ! $? = 0 ]; then
+     continue
+    fi
+    if [ -r $TMP/SeTtagext ]; then
+     if [ "`cat $TMP/SeTtagext`" = "" ]; then
+      rm -f $TMP/SeTtagext
+     fi
+    fi
+    dialog --infobox "'custom' prompt mode selected. Using prompting defaults \
+found in custom tagfiles." 4 50
+    break;
+   fi
+   if [ "$MODE" = "full" ]; then
+    IGNORE_TAGFILES="-ignore_tagfiles"
+    dialog --infobox "Full installation mode. Installing all software \
+packages without prompting." 4 45
+    break;
+   fi
+   if [ "$MODE" = "terse" ]; then
+    setterm -background cyan -foreground black -blank 0
+    clear
+    IGNORE_TAGFILES="-ignore_tagfiles"
+    echo
+    echo
+    echo "Full (terse display) installation mode."
+    echo
+    echo "A one-line description will be displayed as each package is installed."
+    echo
+    break;
+   fi
+   if [ "$MODE" = "menu" ]; then
+    dialog --infobox "'menu' prompt mode selected. Using interactive menus \
+to choose subsystems of related packages." 4 60
+    break;
+   fi
+   if [ "$MODE" = "expert" ]; then
+    dialog --infobox "'expert' prompt mode selected. Using interactive menus \
+to choose packages individually." 4 60
+    break;
+   fi 
+  done
+  export MAKETAG;
+  sleep 1
+  if [ -r $TMP/SeTCDdev ]; then # only try to remount media if it's a CD/DVD
+    slackinstall --device `cat $TMP/SeTCDdev` --promptmode $MODE --srcpath `cat $TMP/SeTDS` --mountpoint /var/log/mount --target $T_PX --series $SERIES
+  elif [ -r $TMP/SeTremotesvr ]; then
+    slackinstall --device noremount --promptmode $MODE --srcpath `cat $TMP/SeTDS` --mountpoint /var/log/mount --target $T_PX --series $SERIES --net `cat $TMP/SeTremotesvr`
+  else
+    slackinstall --device noremount --promptmode $MODE --srcpath `cat $TMP/SeTDS` --mountpoint /var/log/mount --target $T_PX --series $SERIES
+  fi
+  if [ $MODE = terse ]; then
+    # Let's pause a moment and then restore the terminal settings
+    sleep 1
+    setterm -background black -foreground white -blank 0
+  fi
+  MAINSELECT="CONFIGURE"
+ fi
+
+ if [ "$MAINSELECT" = "CONFIGURE" ]; then
+  SeTconfig
+  REPLACE_FSTAB=Y
+  if [ -r $TMP/SeTnative ]; then
+   if [ -r $T_PX/etc/fstab ]; then
+    dialog --title "REPLACE /etc/fstab?" --yesno "You already have an \
+/etc/fstab on your install partition. If you were just adding software, \
+you should probably keep your old /etc/fstab. If you've changed your \
+partitioning scheme, you should use the new /etc/fstab. Do you want \
+to replace your old /etc/fstab with the new one?" 10 58
+    if [ ! $? = 0 ]; then
+     REPLACE_FSTAB=N
+    fi
+   fi
+   if [ "$REPLACE_FSTAB" = "Y" ]; then
+    cat /dev/null > $T_PX/etc/fstab
+    if [ -r $TMP/SeTswap ]; then
+     cat $TMP/SeTswap > $T_PX/etc/fstab
+    fi
+    cat $TMP/SeTnative >> $T_PX/etc/fstab
+    if [ -r $TMP/SeTDOS ]; then
+     cat $TMP/SeTDOS >> $T_PX/etc/fstab
+    fi
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "#/dev/cdrom" "/mnt/cdrom" "auto" "noauto,owner,ro,comment=x-gvfs-show" "0" "0" >> $T_PX/etc/fstab
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "/dev/fd0" "/mnt/floppy" "auto" "noauto,owner" "0" "0" >> $T_PX/etc/fstab
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "devpts" "/dev/pts" "devpts" "gid=5,mode=620" "0" "0" >> $T_PX/etc/fstab
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "proc" "/proc" "proc" "defaults" "0" "0" >> $T_PX/etc/fstab
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "tmpfs" "/dev/shm" "tmpfs" "nosuid,nodev,noexec" "0" "0" >> $T_PX/etc/fstab
+   fi
+   dialog --title "SETUP COMPLETE" --msgbox "System configuration \
+and installation is complete. \
+\n\nYou may now reboot your system." 7 55
+  fi
+ fi
+
+ if [ "$MAINSELECT" = "EXIT" ]; then
+  break
+ fi
+
+done # end of main loop
+sync
+
+chmod 755 $T_PX
+if [ -d $T_PX/tmp ]; then
+ chmod 1777 $T_PX/tmp
+fi
+if mount | grep /var/log/mntiso 1> /dev/null 2> /dev/null ; then
+ umount -f /var/log/mntiso
+fi
+if mount | grep /var/log/mount 1> /dev/null 2> /dev/null ; then
+ umount /var/log/mount
+fi
+# Anything mounted on /var/log/mount now is a fatal error:
+if mount | grep /var/log/mount 1> /dev/null 2> /dev/null ; then
+  exit
+fi
+# If the mount table is corrupt, the above might not do it, so we will
+# try to detect Linux and FAT32 partitions that have slipped by:
+if [ -d /var/log/mount/lost+found -o -d /var/log/mount/recycled \
+     -o -r /var/log/mount/io.sys ]; then
+  exit
+fi
+rm -f /var/log/mount 2> /dev/null
+rmdir /var/log/mount 2> /dev/null
+mkdir /var/log/mount 2> /dev/null
+chmod 755 /var/log/mount
+
+# An fstab file is indicative of an OS installation, rather than
+# just loading the "setup" script and selecting "EXIT"
+if [ -f ${T_PX}/etc/fstab ]; then
+  # umount CD:
+  if [ -r $TMP/SeTCDdev ]; then
+    if mount | grep iso9660 > /dev/null 2> /dev/null ; then
+      umount `mount | grep iso9660 | cut -f 1 -d ' '`
+    fi
+    eject -s `cat $TMP/SeTCDdev`
+    # Tell the user to remove the disc, if one had previously been mounted
+    # (it should now be ejected):
+    dialog \
+     --clear \
+     --title "Slackware Linux Setup is complete" "$@" \
+     --msgbox "\nPlease remove the installation disc.\n" 7 40
+  fi
+  # Offer to reboot or drop to shell:
+  dialog \
+     --title "Slackware Linux Setup is complete" "$@" \
+     --yesno \
+     "\nWould you like to reboot your system?\n\n\n\
+If you choose \"No\", you will be dropped to a shell.\n" 11 50
+    retval=$?
+    if [ $retval = 1 ]; then
+      clear
+      echo
+      echo "You may now reboot your system once you are ready."
+      echo "You can issue the 'reboot' command; or if your system has"
+      echo "a keyboard attached, you can use the key combination: control+alt+delete"
+      echo
+    else
+      touch /reboot
+    fi
+fi
+
+# Fix the date:
+/sbin/fixdate
+
+# final cleanup
+rm -f $TMP/tagfile $TMP/SeT* $TMP/tar-error $TMP/PKGTOOL_REMOVED
+rm -f /var/log/mount/treecache
+rmdir /var/log/mntiso 2>/dev/null
+rm -rf $TMP/treecache
+rm -rf $TMP/pkgcache
+rmdir ${T_PX}/tmp/orbit-root 2> /dev/null
+
+# If the OS had been installed and the user elected to reboot:
+if [ -f /reboot ]; then
+   clear
+   echo "** Starting reboot **"
+   sleep 1
+   reboot
+fi
+
+# end slackware setup script