Wed Jun 6 22:19:01 UTC 201820180606221901

a/bash-4.4.023-x86_64-1.txz:  Upgraded.
a/kernel-firmware-20180604_1fa9ce3-noarch-1.txz:  Upgraded.
a/kernel-generic-4.14.48-x86_64-1.txz:  Upgraded.
a/kernel-huge-4.14.48-x86_64-1.txz:  Upgraded.
a/kernel-modules-4.14.48-x86_64-1.txz:  Upgraded.
ap/cups-2.2.8-x86_64-1.txz:  Upgraded.
ap/ghostscript-fonts-std-8.11-noarch-3.txz:  Rebuilt.
  Rebuilt this and many other font packages or packages with build scripts
  that call mkfontdir or mkfontscale to suppress any error messages caused
  by collisions if another package installation is writing files to the
  same font directories when those utilities are run. In that case, the
  other package will also be running mkfontdir/mkfontscale after the files
  are installed, so any issues will be cleaned up then. Last one out turn
  off the lights, so to speak.
ap/sqlite-3.24.0-x86_64-1.txz:  Upgraded.
ap/terminus-font-4.40-noarch-3.txz:  Rebuilt.
d/kernel-headers-4.14.48-x86-1.txz:  Upgraded.
d/rust-1.26.2-x86_64-1.txz:  Upgraded.
k/kernel-source-4.14.48-noarch-1.txz:  Upgraded.
l/elfutils-0.171-x86_64-1.txz:  Upgraded.
l/harfbuzz-1.7.7-x86_64-1.txz:  Upgraded.
l/mozilla-nss-3.37.3-x86_64-1.txz:  Upgraded.
l/readline-7.0.005-x86_64-1.txz:  Upgraded.
x/dejavu-fonts-ttf-2.37-noarch-4.txz:  Rebuilt.
x/font-adobe-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-adobe-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-100dpi-1.0.4-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-75dpi-1.0.4-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-type1-1.0.4-noarch-3.txz:  Rebuilt.
x/font-arabic-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-lucidatypewriter-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-lucidatypewriter-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-ttf-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-speedo-1.0.2-noarch-3.txz:  Rebuilt.
x/font-bitstream-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-cronyx-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-cursor-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-daewoo-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-dec-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-ibm-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-isas-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-jis-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-micro-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-ethiopic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-meltho-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-misc-1.1.2-noarch-3.txz:  Rebuilt.
x/font-mutt-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-schumacher-misc-1.1.2-noarch-3.txz:  Rebuilt.
x/font-screen-cyrillic-1.0.4-noarch-3.txz:  Rebuilt.
x/font-sony-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-sun-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-winitzki-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-xfree86-type1-1.0.4-noarch-3.txz:  Rebuilt.
x/liberation-fonts-ttf-2.00.1-noarch-3.txz:  Rebuilt.
x/libinput-1.11.0-x86_64-1.txz:  Upgraded.
x/sazanami-fonts-ttf-20040629-noarch-3.txz:  Rebuilt.
x/sinhala_lklug-font-ttf-20060929-noarch-3.txz:  Rebuilt.
x/tibmachuni-font-ttf-1.901b-noarch-3.txz:  Rebuilt.
x/ttf-indic-fonts-0.5.14-noarch-3.txz:  Rebuilt.
x/ttf-tlwg-0.6.4-noarch-3.txz:  Rebuilt.
x/urw-core35-fonts-otf-20170801_91edd6e_git-noarch-2.txz:  Rebuilt.
x/wqy-zenhei-font-ttf-0.8.38_1-noarch-6.txz:  Rebuilt.
xap/mozilla-firefox-60.0.2-x86_64-1.txz:  Upgraded.
  This release contains security fixes and improvements.
  For more information, see:
    https://www.mozilla.org/security/known-vulnerabilities/firefox.html
  (* Security fix *)
xap/x3270-3.3.12ga7-x86_64-5.txz:  Rebuilt.
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

1 files changed, 270 insertions, 0 deletions

diff --git a/source/installer/sources/initrd/usr/lib/setup/INSCD b/source/installer/sources/initrd/usr/lib/setup/INSCD
new file mode 100755
index 000000000..42610aa18
--- /dev/null
+++ b/source/installer/sources/initrd/usr/lib/setup/INSCD
@@ -0,0 +1,270 @@
+#!/bin/sh
+# FIXME: UDF fs support?
+RDIR=/dev/tty4
+NDIR=/dev/null
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+T_PX="`cat $TMP/SeTT_PX`"
+rm -f $TMP/SeTmount $TMP/SeTDS $TMP/SeTCDdev $TMP/reply
+
+dialog --title "SCANNING FOR CD or DVD DRIVE" --menu \
+"Make sure the Slackware disc is in your CD/DVD drive, \
+and then press ENTER to begin the scanning process. \
+Or, if you'd rather specify the device name manually \
+(experts only), choose that option below." \
+11 72 2 \
+"auto" "Scan for the CD or DVD drive (recommended)" \
+"manual" "Manually specify CD or DVD by device name" \
+2> $TMP/reply
+if [ ! -r $TMP/reply ]; then
+ # cancel or esc
+ rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
+ exit
+fi
+
+if [ "`cat $TMP/reply`" = "manual" ]; then
+ dialog --title "MANUAL CD/DVD DEVICE SELECTION" --menu \
+ "Please select your CD/DVD device from the list below. \
+If you don't see your device listed, choose 'custom'. \
+This will let you type in any device name. (and if necessary, \
+will create the device)" \
+ 18 70 9 \
+ "custom" "Type in the CD or DVD device to use" \
+ "/dev/sr0" "First CD/DVD drive" \
+ "/dev/sr1" "Second CD/DVD drive" \
+ "/dev/sr2" "Third CD/DVD drive" \
+ "/dev/sr3" "Fourth CD/DVD drive" \
+ "/dev/hdb" "CD/DVD slave on first IDE bus" \
+ "/dev/hda" "CD/DVD master on first IDE bus (unlikely)" \
+ "/dev/hdc" "CD/DVD master on second IDE bus" \
+ "/dev/hdd" "CD/DVD slave on second IDE bus" \
+ "/dev/hde" "CD/DVD master on third IDE bus" \
+ "/dev/hdf" "CD/DVD slave on third IDE bus" \
+ "/dev/hdg" "CD/DVD master on fourth IDE bus" \
+ "/dev/hdh" "CD/DVD slave on fourth IDE bus" \
+ "/dev/pcd0" "First parallel port ATAPI CD" \
+ "/dev/pcd1" "Second parallel port ATAPI CD" \
+ "/dev/pcd2" "Third parallel port ATAPI CD" \
+ "/dev/pcd3" "Fourth parallel port ATAPI CD" \
+ "/dev/aztcd" "Non-IDE Aztech CD/DVD" \
+ "/dev/cdu535" "Sony CDU-535 CD/DVD" \
+ "/dev/gscd" "Non-IDE GoldStar CD/DVD" \
+ "/dev/sonycd" "Sony CDU-31a CD/DVD" \
+ "/dev/optcd" "Optics Storage CD/DVD" \
+ "/dev/sjcd" "Sanyo non-IDE CD/DVD" \
+ "/dev/mcdx0" "Non-IDE Mitsumi drive 1" \
+ "/dev/mcdx1" "Non-IDE Mitsumi drive 2" \
+ "/dev/sbpcd" "Old non-IDE SoundBlaster CD/DVD" \
+ "/dev/cm205cd" "Philips LMS CM-205 CD/DVD" \
+ "/dev/cm206cd" "Philips LMS CM-206 CD/DVD" \
+ "/dev/mcd" "Old non-IDE Mitsumi CD/DVD" \
+ 2> $TMP/reply
+ if [ ! -r $TMP/reply ]; then
+  # cancel or esc
+  rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
+  exit
+ fi
+ REPLY="`cat $TMP/reply`"
+ if [ "$REPLY" = "custom" ]; then
+  dialog --title "ENTER CD/DVD DEVICE MANUALLY" --inputbox \
+"Please enter the name of the CD/DVD device (such as /dev/hdc) that \
+you wish to use to mount the Slackware CD/DVD:" \
+9 70 2> $TMP/reply
+  if [ ! -r $TMP/reply ]; then
+   # cancel or esc
+   rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
+   exit
+  fi
+  DRIVE_FOUND="`cat $TMP/reply`"
+  if [ ! -r $DRIVE_FOUND ]; then # no such device
+   rm -f $TMP/majorminor
+   dialog --title "MKNOD CD/DVD DEVICE" --inputbox \
+   "There doesn't seem to be a device by the name of $DRIVE_FOUND in the \
+/dev directory, so we will have to create it using the major and minor \
+numbers for the device. If you're using a bootdisk with a custom CD/DVD \
+driver on it, you should be able to find these numbers in the \
+documentation. Also, see the 'devices.txt' file that comes with the \
+Linux kernel source. If you don't know the numbers, you'll have to hit \
+Esc to abort. Enter the major and minor numbers for the new device, \
+separated by one space:" \
+   15 72 2> $TMP/majorminor
+   if [ ! -r $TMP/majorminor ]; then
+    # cancel or esc
+    rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
+    exit
+   fi
+   MAJOR="`cat $TMP/majorminor`"
+   dialog --title "MAKING DEVICE IN /dev" --infobox \
+   "mknod $DRIVE_FOUND b $MAJOR" 3 40
+   mknod $DRIVE_FOUND b $MAJOR 2> $RDIR
+   sleep 1
+   if [ ! -r $DRIVE_FOUND ]; then
+    dialog --title "MKNOD FAILED" --msgbox \
+    "Sorry, but the mknod command failed to make the device.  You'll need to \
+go back and try selecting your source media again. Press ENTER to abort \
+the source media selection process." 8 60
+    rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
+    exit
+   fi
+  fi
+ else
+  DRIVE_FOUND=$REPLY
+ fi
+fi
+
+# Search for SCSI/PATA/SATA CD/DVD drives:
+if [ "$DRIVE_FOUND" = "" ]; then
+ dialog --title "SCANNING" --infobox "Scanning for a \
+CD/DVD drive containing a Slackware disc..." 4 50
+ sleep 1
+ for device in \
+  /dev/sr0 /dev/sr1 /dev/sr2 /dev/sr3 \
+  ; do
+  mount -o ro -t iso9660 $device /var/log/mount 1> $RDIR 2> $RDIR
+  if [ $? = 0 ]; then
+   DRIVE_FOUND=$device
+   umount /var/log/mount
+   break
+  fi
+ done
+fi
+
+# Search the old IDE interfaces:
+if [ "$DRIVE_FOUND" = "" ]; then
+ dialog --title "SCANNING" --infobox "Scanning for an IDE \
+CD/DVD drive containing a Slackware disc..." 4 56
+ sleep 1
+ for device in \
+  /dev/hdd /dev/hdc /dev/hdb /dev/hda \
+  /dev/hde /dev/hdf /dev/hdg /dev/hdh \
+  /dev/hdi /dev/hdj /dev/hdk /dev/hdl \
+  /dev/hdm /dev/hdn /dev/hdo /dev/hdp \
+  ; do
+  mount -o ro -t iso9660 $device /var/log/mount 1> $RDIR 2> $RDIR
+  if [ $? = 0 ]; then
+   DRIVE_FOUND=$device
+   umount /var/log/mount
+   break
+  fi
+ done
+fi
+
+# Search for parallel port ATAPI CD/DVD drives:
+if [ "$DRIVE_FOUND" = "" ]; then
+ dialog --title "SCANNING" --infobox "Scanning for a parallel port \
+ATAPI CD/DVD drive containing a Slackware disc..." 4 52
+ sleep 1
+ for device in \
+  /dev/pcd0 /dev/pcd1 /dev/pcd2 /dev/pcd3 \
+  ; do
+  mount -o ro -t iso9660 $device /var/log/mount 1> $RDIR 2> $RDIR
+  if [ $? = 0 ]; then
+   DRIVE_FOUND=$device
+   umount /var/log/mount
+   break
+  fi
+ done
+fi
+
+# Still not found? OK, we will search for CD/DVD drives on old, pre-ATAPI
+# proprietary interfaces. There aren't too many of these still around, and
+# the scan won't actually work unless a bootdisk that supports the drive is
+# used, and any necessary parameters have been passed to the kernel.
+if [ "$DRIVE_FOUND" = "" ]; then
+ dialog --title "SCANNING" --msgbox "No IDE/SCSI drive, so we will try \
+scanning for CD drives on \
+old proprietary interfaces, such as SoundBlaster pre-IDE CD drives, \
+Sony CDU-31a, Sony 535, old Mitsumi pre-IDE, old Optics, etc. For this \
+scan to work at all, you'll need to be using a bootdisk that supports \
+your CD drive. Please press ENTER to begin this last-chance scan \
+for old, obsolete hardware." 11 60
+ for device in \
+  /dev/sonycd /dev/gscd /dev/optcd /dev/sjcd /dev/mcdx0 /dev/mcdx1 \
+  /dev/cdu535 /dev/sbpcd /dev/aztcd /dev/cm205cd /dev/cm206cd \
+  /dev/bpcd /dev/mcd \
+  ; do
+  mount -o ro -t iso9660 $device /var/log/mount 1> $RDIR 2> $RDIR
+  if [ $? = 0 ]; then
+   DRIVE_FOUND=$device
+   umount /var/log/mount
+   break
+  fi
+ done
+fi
+
+if [ "$DRIVE_FOUND" = "" ]; then
+ dialog --title "CD/DVD DRIVE NOT FOUND" --msgbox \
+ "A CD/DVD drive could not be found on any of the devices that were \
+scanned. Possible reasons include using a bootdisk or kernel that \
+doesn't support your drive, failing to pass parameters needed by some \
+drives to the kernel, not having the Slackware disc in your CD/DVD \
+drive, or using a drive connected to a Plug and Play soundcard (in this \
+case, connecting the drive directly to the IDE interface often helps). \
+Please make sure you are using the correct bootdisk for your hardware, \
+consult the BOOTING file for possible information on \
+forcing the detection of your drive, and then reattempt installation. \
+If all else fails, see FAQ.TXT for information about copying \
+parts of this CD to your DOS partition and installing it from there.\n\
+\n\
+You will now be returned to the main menu. If you want to try looking \
+for the CD again, you may skip directly to the SOURCE menu selection." \
+ 0 0
+ rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
+ exit
+fi
+
+while [ 0 ]; do # time to try to mount the CD/DVD device:
+ mount -o ro -t iso9660 $DRIVE_FOUND /var/log/mount 1> $RDIR 2> $RDIR
+ if [ $? = 0 ]; then # mounted successfully
+  dialog --title "CD/DVD DRIVE FOUND" --sleep 1 --infobox \
+  "A Slackware disc was found in device $DRIVE_FOUND." 3 52
+  break
+ else # failed to mount
+  dialog --title "MOUNT ERROR" --menu "There was an error \
+attempting to mount the CD/DVD on $DRIVE_FOUND.  \
+Maybe the device name is incorrect, the disc is not in the \
+drive, or the kernel you are using does not support the \
+device. (possibly an incorrect bootdisk) \
+What would you like to do now?" \
+  13 70 3 \
+  "1" "Abort CD installation" \
+  "2" "Attempt to mount the CD/DVD device again" \
+  "3" "Ignore the error and continue" 2> $TMP/errordo
+  if [ ! $? = 0 ]; then
+   rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
+   exit;
+  fi
+  DOWHAT="`cat $TMP/errordo`"
+  rm -f $TMP/errordo
+  if [ $DOWHAT = 1 ]; then
+   rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev
+   exit
+  elif [ $DOWHAT = 2 ]; then
+   dialog --title "ATTEMPTING TO MOUNT CD/DVD on $DRIVE_FOUND" \
+   --infobox "Attempting to mount your CD/DVD again with the \
+following command: mount -o ro -t iso9660 $DRIVE_FOUND \
+/var/log/mount" 4 69 
+   umount /var/log/mount 1> $NDIR 2> $NDIR
+   sleep 1
+  elif [ $DOWHAT = 3 ]; then
+   # Ignore error, really bad plan but whatever
+   break
+  fi
+ fi
+done
+# since we should have mounted successfully, let's refresh 
+# the link for /dev/cdrom on the target partition:
+if [ ! -d $T_PX/dev ]; then
+ mkdir $T_PX/dev
+ chown root.root $T_PX/dev
+ chmod 755 $T_PX/dev
+fi
+( cd $T_PX/dev ; ln -sf $DRIVE_FOUND cdrom )
+
+# Pass information about the source directory to the next install stage:
+echo "/var/log/mount/slackware" > $TMP/SeTDS
+echo "-source_mounted" > $TMP/SeTmount
+echo "$DRIVE_FOUND" > $TMP/SeTCDdev
+echo "/dev/null" > $TMP/SeTsource