Wed Jun 6 22:19:01 UTC 201820180606221901

a/bash-4.4.023-x86_64-1.txz:  Upgraded.
a/kernel-firmware-20180604_1fa9ce3-noarch-1.txz:  Upgraded.
a/kernel-generic-4.14.48-x86_64-1.txz:  Upgraded.
a/kernel-huge-4.14.48-x86_64-1.txz:  Upgraded.
a/kernel-modules-4.14.48-x86_64-1.txz:  Upgraded.
ap/cups-2.2.8-x86_64-1.txz:  Upgraded.
ap/ghostscript-fonts-std-8.11-noarch-3.txz:  Rebuilt.
  Rebuilt this and many other font packages or packages with build scripts
  that call mkfontdir or mkfontscale to suppress any error messages caused
  by collisions if another package installation is writing files to the
  same font directories when those utilities are run. In that case, the
  other package will also be running mkfontdir/mkfontscale after the files
  are installed, so any issues will be cleaned up then. Last one out turn
  off the lights, so to speak.
ap/sqlite-3.24.0-x86_64-1.txz:  Upgraded.
ap/terminus-font-4.40-noarch-3.txz:  Rebuilt.
d/kernel-headers-4.14.48-x86-1.txz:  Upgraded.
d/rust-1.26.2-x86_64-1.txz:  Upgraded.
k/kernel-source-4.14.48-noarch-1.txz:  Upgraded.
l/elfutils-0.171-x86_64-1.txz:  Upgraded.
l/harfbuzz-1.7.7-x86_64-1.txz:  Upgraded.
l/mozilla-nss-3.37.3-x86_64-1.txz:  Upgraded.
l/readline-7.0.005-x86_64-1.txz:  Upgraded.
x/dejavu-fonts-ttf-2.37-noarch-4.txz:  Rebuilt.
x/font-adobe-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-adobe-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-100dpi-1.0.4-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-75dpi-1.0.4-noarch-3.txz:  Rebuilt.
x/font-adobe-utopia-type1-1.0.4-noarch-3.txz:  Rebuilt.
x/font-arabic-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-lucidatypewriter-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-lucidatypewriter-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-ttf-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bh-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-100dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-75dpi-1.0.3-noarch-3.txz:  Rebuilt.
x/font-bitstream-speedo-1.0.2-noarch-3.txz:  Rebuilt.
x/font-bitstream-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-cronyx-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-cursor-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-daewoo-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-dec-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-ibm-type1-1.0.3-noarch-3.txz:  Rebuilt.
x/font-isas-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-jis-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-micro-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-ethiopic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-meltho-1.0.3-noarch-3.txz:  Rebuilt.
x/font-misc-misc-1.1.2-noarch-3.txz:  Rebuilt.
x/font-mutt-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-schumacher-misc-1.1.2-noarch-3.txz:  Rebuilt.
x/font-screen-cyrillic-1.0.4-noarch-3.txz:  Rebuilt.
x/font-sony-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-sun-misc-1.0.3-noarch-3.txz:  Rebuilt.
x/font-winitzki-cyrillic-1.0.3-noarch-3.txz:  Rebuilt.
x/font-xfree86-type1-1.0.4-noarch-3.txz:  Rebuilt.
x/liberation-fonts-ttf-2.00.1-noarch-3.txz:  Rebuilt.
x/libinput-1.11.0-x86_64-1.txz:  Upgraded.
x/sazanami-fonts-ttf-20040629-noarch-3.txz:  Rebuilt.
x/sinhala_lklug-font-ttf-20060929-noarch-3.txz:  Rebuilt.
x/tibmachuni-font-ttf-1.901b-noarch-3.txz:  Rebuilt.
x/ttf-indic-fonts-0.5.14-noarch-3.txz:  Rebuilt.
x/ttf-tlwg-0.6.4-noarch-3.txz:  Rebuilt.
x/urw-core35-fonts-otf-20170801_91edd6e_git-noarch-2.txz:  Rebuilt.
x/wqy-zenhei-font-ttf-0.8.38_1-noarch-6.txz:  Rebuilt.
xap/mozilla-firefox-60.0.2-x86_64-1.txz:  Upgraded.
  This release contains security fixes and improvements.
  For more information, see:
    https://www.mozilla.org/security/known-vulnerabilities/firefox.html
  (* Security fix *)
xap/x3270-3.3.12ga7-x86_64-5.txz:  Rebuilt.
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

9 files changed, 138 insertions, 0 deletions

diff --git a/source/installer/sources/initrd/bin/bash b/source/installer/sources/initrd/bin/bash
new file mode 100755
index 000000000..f659f3699
--- /dev/null
+++ b/source/installer/sources/initrd/bin/bash
@@ -0,0 +1,2 @@
+#!/bin/ash
+exec /bin/ash $*
diff --git a/source/installer/sources/initrd/bin/compress b/source/installer/sources/initrd/bin/compress
new file mode 120000
index 000000000..8483eff1e
--- /dev/null
+++ b/source/installer/sources/initrd/bin/compress
@@ -0,0 +1 @@
+/usr/bin/compress
\ No newline at end of file
diff --git a/source/installer/sources/initrd/bin/egrep b/source/installer/sources/initrd/bin/egrep
new file mode 120000
index 000000000..c45b35b77
--- /dev/null
+++ b/source/installer/sources/initrd/bin/egrep
@@ -0,0 +1 @@
+grep.bin
\ No newline at end of file
diff --git a/source/installer/sources/initrd/bin/fgrep b/source/installer/sources/initrd/bin/fgrep
new file mode 120000
index 000000000..c45b35b77
--- /dev/null
+++ b/source/installer/sources/initrd/bin/fgrep
@@ -0,0 +1 @@
+grep.bin
\ No newline at end of file
diff --git a/source/installer/sources/initrd/bin/filesize b/source/installer/sources/initrd/bin/filesize
new file mode 100755
index 000000000..4c537edad
--- /dev/null
+++ b/source/installer/sources/initrd/bin/filesize
@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# Print the size of a file, in bytes.
+#
+SIZE=`ls -l -d -G $1 | cut -b23-32`
+echo -n $SIZE
diff --git a/source/installer/sources/initrd/bin/grep b/source/installer/sources/initrd/bin/grep
new file mode 120000
index 000000000..c45b35b77
--- /dev/null
+++ b/source/installer/sources/initrd/bin/grep
@@ -0,0 +1 @@
+grep.bin
\ No newline at end of file
diff --git a/source/installer/sources/initrd/bin/network b/source/installer/sources/initrd/bin/network
new file mode 100755
index 000000000..59637dd02
--- /dev/null
+++ b/source/installer/sources/initrd/bin/network
@@ -0,0 +1,41 @@
+#!/bin/sh
+# This script configures support for ethernet cards needed during
+# installation for an NFS install.
+#
+# Normally this automatically loads an image from the ISO, and if
+# it cannot be found tries to load a floppy disk.
+#
+# You may also give a path to the network.dsk image, like this:
+# network /some/exact/path/network.dsk
+#
+
+TMP=/var/log/setup/tmp
+mkdir -p $TMP/dhcpc
+
+echo
+echo "Network support for NFS install, 2006-09-20 volkerdi@slackware.com"
+echo "Network support for FTP/HTTP install, 26-Jan-2008 alien@slackware.com"
+echo
+
+# Now, let's call the network.sh script to actually do most of the work:
+
+if [ -r /scripts/network.sh ]; then
+  sh /scripts/network.sh
+fi
+
+# If we can get information from a local DHCP server, we store that for later:
+if ! grep -wq nodhcp /proc/cmdline ; then
+  for EDEV in $(cat /proc/net/dev | grep ':' | sed -e "s/^ *//" | cut -f1 -d: | grep -v lo) ; do
+   if grep -q `echo ${EDEV}: | cut -f 1 -d :`: /proc/net/wireless ; then
+     continue # skip wireless interfaces
+   fi
+    /sbin/dhcpcd -t 10 -T $EDEV 1>$TMP/dhcpc/dhcpcd-${EDEV}.info 2>/dev/null &
+  done
+fi
+
+echo
+echo "The next step in your installation may be partitioning your hard drive"
+echo "(if you're installing to a Linux partition) with 'fdisk' or 'cfdisk'"
+echo "(the menu-driven version of fdisk).  If you already have a partition"
+echo "prepared for Linux, run 'setup' to start the installer program."
+echo
diff --git a/source/installer/sources/initrd/bin/pcmcia b/source/installer/sources/initrd/bin/pcmcia
new file mode 100755
index 000000000..b77503deb
--- /dev/null
+++ b/source/installer/sources/initrd/bin/pcmcia
@@ -0,0 +1,29 @@
+#!/bin/sh
+# This script configures support for PCMCIA and/or Cardbus cards needed during
+# installation, such as a CD-ROM drive or an ethernet card used for an NFS
+# install.
+
+echo
+echo "PCMCIA/Cardbus support script, 2003-02-18 volkerdi@slackware.com"
+echo "                               2007-05-09 alien@slackware.com"
+echo
+
+# OK, here goes nothing:
+/etc/rc.d/rc.pcmcia start
+
+echo
+echo
+echo "The PCMCIA/Cardbus subsystem is now installed.  Please make sure that"
+echo "all of the cards you'll need for the installation are in the machine."
+echo "If you still need to insert any PCMCIA/Cardbus cards, do that now.  Once"
+echo "the drive stops (indicating that all needed modules have been"
+echo -n "loaded), then press [enter] to continue."
+read inputjunk
+echo
+
+echo
+echo "The next step in your installation may be partitioning your hard drive"
+echo "(if you're installing to a Linux partition) with 'fdisk' or 'cfdisk'"
+echo "(the menu-driven version of fdisk).  If you already have a partition"
+echo "prepared for Linux, run 'setup' to start the installer program."
+echo
diff --git a/source/installer/sources/initrd/bin/zcat b/source/installer/sources/initrd/bin/zcat
new file mode 100755
index 000000000..569b15391
--- /dev/null
+++ b/source/installer/sources/initrd/bin/zcat
@@ -0,0 +1,56 @@
+#!/bin/sh
+# Uncompress files to standard output.
+
+# Copyright (C) 2007 Free Software Foundation
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+bindir='/bin'
+case $1 in
+--__bindir) bindir=${2?}; shift; shift;;
+esac
+PATH=$bindir:$PATH
+
+version="zcat (gzip) 1.4
+Copyright (C) 2007, 2009-2010 Free Software Foundation, Inc.
+This is free software.  You may redistribute copies of it under the terms of
+the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Paul Eggert."
+
+usage="Usage: $0 [OPTION]... [FILE]...
+Uncompress FILEs to standard output.
+
+  -f, --force       force; read compressed data even from a terminal
+  -l, --list        list compressed file contents
+  -q, --quiet       suppress all warnings
+  -r, --recursive   operate recursively on directories
+  -S, --suffix=SUF  use suffix SUF on compressed files
+  -t, --test        test compressed file integrity
+  -v, --verbose     verbose mode
+      --help        display this help and exit
+      --version     display version information and exit
+
+With no FILE, or when FILE is -, read standard input.
+
+Report bugs to <bug-gzip@gnu.org>."
+
+case $1 in
+--help)    exec echo "$usage";;
+--version) exec echo "$version";;
+esac
+
+exec gzip -cd "$@"