Wed Dec 23 21:21:34 UTC 202020201223212134

a/lilo-24.2-x86_64-10.txz:  Rebuilt.
  Add -fcommon to fix build with gcc10.
  liloconfig:
  Don't warn about UMSDOS which is long obsolete.
  Detect QEMU and use /dev/vda as the boot device in that case.
  Fix a case where /mnt was used instead of the target partition variable.
  Thanks to alienBOB.
a/mkinitrd-1.4.11-x86_64-16.txz:  Rebuilt.
  Blacklist rules.d/73-seat-late.rules. Thanks to Robby Workman.
a/ndctl-71.1-x86_64-1.txz:  Upgraded.
a/sysklogd-2.1.2-x86_64-3.txz:  Rebuilt.
  /etc/logrotate.d/syslog.new: add missingok option. Thanks to sovteq.
l/gdbm-1.19-x86_64-1.txz:  Upgraded.
t/fig2dev-3.2.8-x86_64-1.txz:  Upgraded.
x/libepoxy-1.5.5-x86_64-1.txz:  Upgraded.

7 files changed, 29 insertions, 20 deletions

diff --git a/source/a/lilo/lilo.SlackBuild b/source/a/lilo/lilo.SlackBuild
index fec935540..aa221a071 100755
--- a/source/a/lilo/lilo.SlackBuild
+++ b/source/a/lilo/lilo.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2008, 2009, 2010, 2011, 2013, 2015, 2016, 2017, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010, 2011, 2013, 2015, 2016, 2017, 2018, 2020  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=lilo
 VERSION=${VERSION:-24.2}
-BUILD=${BUILD:-9}
+BUILD=${BUILD:-10}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -59,6 +59,7 @@ chown -R root:root .
 zcat $CWD/lilo.ignore.usable.memory.above.4G.diff.gz | patch -p1 --verbose || exit 1
 zcat $CWD/lilo.allow.colons.in.by-id.diff.gz | patch -p1 --verbose || exit 1
 zcat $CWD/lilo.nvme.support.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/lilo.gcc10.diff.gz | patch -p1 --verbose || exit 1
 
 make || exit 1
 make install DESTDIR=$PKG || exit 1
diff --git a/source/a/lilo/lilo.gcc10.diff b/source/a/lilo/lilo.gcc10.diff
new file mode 100644
index 000000000..a94c7ebc0
--- /dev/null
+++ b/source/a/lilo/lilo.gcc10.diff
@@ -0,0 +1,11 @@
+--- ./src/Makefile.orig	2015-11-21 17:50:25.000000000 -0600
++++ ./src/Makefile	2020-12-23 15:08:08.067692842 -0600
+@@ -22,7 +22,7 @@
+ NASM=nasm
+ G=`cat foo1 foo2 | grep version | cut -d " " -f 3`
+ 
+-CFLAGS=$(OPT) -Wall $(PCONFIG)
++CFLAGS=$(OPT) -Wall $(PCONFIG) -fcommon
+ LIBS=$(DEVMAPPER)
+ 
+ OBJS=lilo.o raid.o map.o geometry.o boot.o device.o common.o bsect.o cfg.o \
diff --git a/source/a/lilo/liloconfig b/source/a/lilo/liloconfig
index 2129c6e1a..2146f7a7e 100644
--- a/source/a/lilo/liloconfig
+++ b/source/a/lilo/liloconfig
@@ -678,20 +678,6 @@ else
   exit 99 # no kernel?  guess you couldn't read.  bye bye.
 fi
 
- # If we're installing from the umsdos.gz rootdisk, suggest skipping LILO:
- if [ ! "$T_PX" = "/" ]; then
-   if mount | grep " on /mnt " | grep umsdos 1> /dev/null 2> /dev/null ; then
-     dialog --title "SKIP LILO CONFIGURATION? (RECOMMENDED)" --yesno "Since \
-you are installing to a FAT partition, it's suggested that you do not \
-configure LILO at this time. (Instead, use your bootdisk. For booting \
-off the hard drive from MS-DOS, you can use Loadlin. You'll find \
-Loadlin on your hard drive in \LINUX\ROOT) Skip LILO configuration \
-(highly recommended)?" 10 70
-     if [ $? = 0 ]; then
-       exit
-     fi 
-   fi
- fi
  # OK, now let's see if we should automate things:
  dialog --title "INSTALL LILO" --menu "LILO (Linux Loader) is a generic \
 boot loader. There's a simple installation which tries to automatically \
@@ -796,6 +782,12 @@ selection. Please pick a target location:" 15 65 3 \
        MBR_TARGET=/dev/hdg
        echo $MBR_TARGET > $TMP/LILOMBR
       fi
+      if dmidecode 2> /dev/null | grep -q QEMU 2> /dev/null ; then
+       if [ -r /dev/vda ]; then
+         MBR_TARGET=/dev/vda
+         echo $MBR_TARGET > $TMP/LILOMBR
+       fi
+      fi
      fi
     done
     LILO_TARGET=$(cat $TMP/LILOMBR)
@@ -880,6 +872,9 @@ EOF
      echo "# Append any additional kernel parameters:" >> $TMP/lilo.conf
      echo "append=\"$APPEND $UTFVT\"" >> $TMP/lilo.conf
    #fi
+   if echo $LILO_TARGET | grep -q vda 2>/dev/null ; then
+    echo "disk = /dev/vda bios=0x80 max-partitions=7" >> $TMP/lilo.conf
+   fi
    cat << EOF >> $TMP/lilo.conf
 $PROMPT
 $TIMEOUT
@@ -1154,8 +1149,8 @@ configuration file, it could not be found. Try making a new one." 9 70
    if [ -r $TMP/lilo.conf ]; then
     dialog --title "YOUR NEW /etc/lilo.conf" --textbox "$TMP/lilo.conf" 22 70
    else
-    if [ -r /mnt/etc/lilo.conf ]; then
-     dialog --title "YOUR OLD /etc/lilo.conf" --textbox "/mnt/etc/lilo.conf" 22 70
+    if [ -r $T_PX/etc/lilo.conf ]; then
+     dialog --title "YOUR OLD /etc/lilo.conf" --textbox "$T_PX/etc/lilo.conf" 22 70
     elif [ "$T_PX" = "/" -a -r /etc/lilo.conf ]; then
      dialog --title "YOUR OLD /etc/lilo.conf" --textbox "/etc/lilo.conf" 22 70
     else
diff --git a/source/a/mkinitrd/mkinitrd b/source/a/mkinitrd/mkinitrd
index 7f921e3bd..18a6d9e82 100644
--- a/source/a/mkinitrd/mkinitrd
+++ b/source/a/mkinitrd/mkinitrd
@@ -70,6 +70,7 @@ LIBUDEV_BLACKLIST="\
   check-ptp-camera \
   udev-configure-printer \
   rules.d/60-openobex.rules \
+  rules.d/73-seat-late.rules \
   rules.d/85-regulatory.rules \
   "
 
diff --git a/source/a/mkinitrd/mkinitrd.SlackBuild b/source/a/mkinitrd/mkinitrd.SlackBuild
index 879e64c01..f4a63f13c 100755
--- a/source/a/mkinitrd/mkinitrd.SlackBuild
+++ b/source/a/mkinitrd/mkinitrd.SlackBuild
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=mkinitrd
 VERSION=${VERSION:-1.4.11}
 BB=1.30.1
-BUILD=${BUILD:-15}
+BUILD=${BUILD:-16}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/a/sysklogd/config/syslog.logrotate b/source/a/sysklogd/config/syslog.logrotate
index 031e68df0..cd66c8d04 100644
--- a/source/a/sysklogd/config/syslog.logrotate
+++ b/source/a/sysklogd/config/syslog.logrotate
@@ -1,5 +1,6 @@
 /var/log/cron /var/log/debug /var/log/maillog /var/log/messages /var/log/secure /var/log/spooler /var/log/syslog {
     sharedscripts
+    missingok
     postrotate
 	/bin/kill -HUP `cat /var/run/syslogd.pid 2>/dev/null` 2>/dev/null || true
     endscript
diff --git a/source/a/sysklogd/sysklogd.SlackBuild b/source/a/sysklogd/sysklogd.SlackBuild
index 00448503e..fa5efe09e 100755
--- a/source/a/sysklogd/sysklogd.SlackBuild
+++ b/source/a/sysklogd/sysklogd.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=sysklogd
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then