Slackware 13.1slackware-13.1

Wed May 19 08:58:23 UTC 2010
Slackware 13.1 x86_64 stable is released!
Lots of thanks are due -- see the RELEASE_NOTES and the rest of the
ChangeLog for credits.  The ISOs are on their way to replication,
a 6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We are taking pre-orders now at store.slackware.com, and offering
a discount if you sign up for a subscription.  Consider picking up
a copy to help support the project.  Thanks again to the Slackware
community for testing, contributing, and generally holding us to a
high level of quality.  :-)
Enjoy!

4 files changed, 20 insertions, 20 deletions

diff --git a/source/a/sysvinit-scripts/scripts/rc.6 b/source/a/sysvinit-scripts/scripts/rc.6
index 2d5028e35..e49160161 100644
--- a/source/a/sysvinit-scripts/scripts/rc.6
+++ b/source/a/sysvinit-scripts/scripts/rc.6
@@ -202,21 +202,21 @@ echo "Remounting root filesystem read-only."
 /bin/sync
 
 # Close any volumes opened by cryptsetup:
-if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then
+if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then
   cat /etc/crypttab | grep -v "^#" | grep -v "^$" | while read line; do
     # NOTE: we only support LUKS formatted volumes (except for swap)!
     LUKS=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f1 -d' ')
     DEV=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f2 -d' ')
     OPTS=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f4 -d' ')
-    if /sbin/cryptsetup.static isLuks $DEV 2>/dev/null ; then
+    if /sbin/cryptsetup isLuks $DEV 2>/dev/null ; then
       echo "Locking LUKS crypt volume '${LUKS}':"
-      /sbin/cryptsetup.static luksClose ${LUKS}
+      /sbin/cryptsetup luksClose ${LUKS}
     elif echo $OPTS | grep -wq swap ; then
       # If any of the volumes was used as encrypted swap,
       # then run mkswap on the underlying device -
       # in case other Linux installations on this computer should use it:
       echo "Erasing encrypted swap '${LUKS}' and restoring normal swap on ${DEV}:"
-      /sbin/cryptsetup.static remove ${LUKS}
+      /sbin/cryptsetup remove ${LUKS}
       mkswap $DEV
     fi
   done
diff --git a/source/a/sysvinit-scripts/scripts/rc.M b/source/a/sysvinit-scripts/scripts/rc.M
index fe2c9b6f0..ccdcb6f30 100644
--- a/source/a/sysvinit-scripts/scripts/rc.M
+++ b/source/a/sysvinit-scripts/scripts/rc.M
@@ -74,7 +74,7 @@ fi
 
 # If we are returning from single-user mode we will need to restart
 # udevd on systems that use udev:
-if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems ; then
+if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems ; then
   if ! grep -wq nohotplug /proc/cmdline ; then
     if [ -x /etc/rc.d/rc.udev ]; then
       /bin/sh /etc/rc.d/rc.udev start
@@ -217,7 +217,7 @@ fi
 
 # If we're using udev, make /dev/cdrom and any other optical drive symlinks
 # if some udev rule hasn't made them already:
-if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems; then
+if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems; then
   if ! grep -wq nohotplug /proc/cmdline ; then
     if [ -x /lib/udev/rc.optical-symlinks -a -x /etc/rc.d/rc.udev ]; then
       /bin/sh /lib/udev/rc.optical-symlinks
diff --git a/source/a/sysvinit-scripts/scripts/rc.S b/source/a/sysvinit-scripts/scripts/rc.S
index a0072d286..7c5c43edb 100644
--- a/source/a/sysvinit-scripts/scripts/rc.S
+++ b/source/a/sysvinit-scripts/scripts/rc.S
@@ -7,8 +7,8 @@
 
 PATH=/sbin:/usr/sbin:/bin:/usr/bin
 
-# Mount /proc right away:
-/sbin/mount -v proc /proc -n -t proc
+# Try to mount /proc:
+/sbin/mount -v proc /proc -n -t proc 2> /dev/null
 
 # Mount sysfs next, if the kernel supports it:
 if [ -d /sys ]; then
@@ -29,7 +29,7 @@ fi
 # promise to list all of them), and make any additional device nodes that you
 # need in the /dev directory.  Even USB and IEEE1394 devices will need to have
 # the modules loaded by hand if udev is not used with a 2.6 kernel.  So use it.  :-)
-if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems ; then
+if grep -wq sysfs /proc/mounts && grep -q tmpfs /proc/filesystems ; then
   if ! grep -wq nohotplug /proc/cmdline ; then
     if [ -x /etc/rc.d/rc.udev ]; then
       /bin/sh /etc/rc.d/rc.udev start
@@ -59,7 +59,7 @@ if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
 fi
 
 # Open any volumes created by cryptsetup:
-if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then
+if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then
   # First, check for device-mapper support.
   if ! grep -wq device-mapper /proc/devices ; then
     # If device-mapper exists as a module, try to load it.
@@ -77,19 +77,19 @@ if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then
     if echo $OPTS | grep -wq ro ; then LUKSOPTS="${LUKSOPTS} --readonly" ; fi
 
     # Skip LUKS volumes that were already unlocked (in the initrd):
-    /sbin/cryptsetup.static status $LUKS 1>/dev/null 2>/dev/null && continue
-    if /sbin/cryptsetup.static isLuks $DEV 2>/dev/null ; then
+    /sbin/cryptsetup status $LUKS 1>/dev/null 2>/dev/null && continue
+    if /sbin/cryptsetup isLuks $DEV 2>/dev/null ; then
       echo "Unlocking LUKS crypt volume '${LUKS}' on device '$DEV':"
       if [ -n "${PASS}" ]; then
         if [ -f ${PASS} ]; then
-          /sbin/cryptsetup.static ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS
+          /sbin/cryptsetup ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS
         elif [ "${PASS}" != "none" ]; then
           # A password field of 'none' indicates a line for swap:
-          echo "${PASS}" | /sbin/cryptsetup.static ${LUKSOPTS} luksOpen $DEV $LUKS
+          echo "${PASS}" | /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS
         fi
       else
         for i in seq 1 3 ; do
-          /sbin/cryptsetup.static ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1
+          /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1
           [ $? -eq 0 ] && break
         done
       fi
@@ -97,14 +97,14 @@ if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then
       # If any of the volumes is to be used as encrypted swap,
       # then encrypt it using a random key and run mkswap:
       echo "Creating encrypted swap on device '$DEV' mapped to '${LUKS}':"
-      /sbin/cryptsetup.static --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV
+      /sbin/cryptsetup --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV
       mkswap /dev/mapper/$LUKS
     fi
   done
 fi
 
 # Enable swapping:
-/sbin/swapon -a
+/sbin/swapon -a 2> /dev/null
 
 # Start FUSE, if requested:
 if [ -x /etc/rc.d/rc.fuse ]; then
@@ -322,7 +322,7 @@ fi
 # Enable swapping again.  This is needed in case a swapfile is used,
 # as it can't be enabled until the filesystem it resides on has been
 # mounted read-write.
-/sbin/swapon -a
+/sbin/swapon -a 2> /dev/null
 
 # Clean up some temporary files:
 rm -f /var/run/* /var/run/*/* /var/run/*/*/* /etc/nologin \
diff --git a/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild b/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
index 4b9eba043..537d8be98 100755
--- a/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
+++ b/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2005-2009  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -23,7 +23,7 @@
 
 VERSION=${VERSION:-1.2}
 ARCH=noarch
-BUILD=${BUILD:-30}
+BUILD=${BUILD:-32}
 
 CWD=$(pwd)
 TMP=${TMP:-/tmp}