Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

4 files changed, 157 insertions, 0 deletions

diff --git a/extra/source/wicd/README.SLACKWARE b/extra/source/wicd/README.SLACKWARE
new file mode 100644
index 000000000..47a9cba99
--- /dev/null
+++ b/extra/source/wicd/README.SLACKWARE
@@ -0,0 +1,21 @@
+After installing this package, make sure the /etc/rc.d/rc.wicd
+script is executable; if necessary, do:
+  chmod +x /etc/rc.d/rc.wicd
+
+Results have varied, but you will probably need/want to remove
+any references to interfaces from /etc/rc.d/rc.inet1.conf - in
+other words, make that file look as if netconfig has never been
+run.
+
+When you start X, you should see a wicd icon in the system tray;
+click on it to open the gui interface and configure as desired.
+Your user account will need to be a member of the 'netdev' group 
+in order to use wicd.
+
+Note that urwid will need to be installed if you want to use the 
+curses client.
+
+Also, if you don't have kde installed, you won't have a graphical
+sudo client available; you might wish to consider ktsuss from
+SlackBuilds.org.
+
diff --git a/extra/source/wicd/doinst.sh b/extra/source/wicd/doinst.sh
new file mode 100644
index 000000000..2c0f7d98b
--- /dev/null
+++ b/extra/source/wicd/doinst.sh
@@ -0,0 +1,36 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.wicd.new:
+if [ -e etc/rc.d/rc.wicd ]; then
+  cp -a etc/rc.d/rc.wicd etc/rc.d/rc.wicd.new.incoming
+  cat etc/rc.d/rc.wicd.new > etc/rc.d/rc.wicd.new.incoming
+  mv etc/rc.d/rc.wicd.new.incoming etc/rc.d/rc.wicd.new
+fi
+
+# Update desktop menu
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+# Update icon cache if one exists
+if [ -r usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache -t -f usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
+config etc/dbus-1/system.d/wicd.conf.new
+config etc/rc.d/rc.wicd.new
+config etc/wicd/manager-settings.conf.new
+
diff --git a/extra/source/wicd/slack-desc b/extra/source/wicd/slack-desc
new file mode 100644
index 000000000..47cf875f8
--- /dev/null
+++ b/extra/source/wicd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler-------------------------------------------------------|
+wicd: wicd (network manager for linux)
+wicd:
+wicd: wicd is a wired and wireless network manager for Linux.
+wicd: Some features include:
+wicd: - Ability to connect to wired and wireless networks
+wicd: - Profiles for each wireless network and wired network
+wicd: - Many encryption schemes, some of which include WEP/WPA/WPA2
+wicd: - Compatible with wireless-tools 
+wicd:
+wicd: Homepage: http://wicd.net
+wicd:
diff --git a/extra/source/wicd/wicd.SlackBuild b/extra/source/wicd/wicd.SlackBuild
new file mode 100755
index 000000000..21d6d454c
--- /dev/null
+++ b/extra/source/wicd/wicd.SlackBuild
@@ -0,0 +1,81 @@
+#!/bin/sh
+
+# Copyright 2008,2009  Robby Workman  Northport, AL, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=wicd
+VERSION=${VERSION:-1.6.2.1}
+ARCH=${ARCH:-x86_64}	# This should be the same as the python package
+BUILD=${BUILD:-1}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PRGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1
+cd $PRGNAM-$VERSION || exit 1
+chown -R root:root .
+
+python setup.py configure \
+  --lib=/usr/lib${LIBDIRSUFFIX}/wicd \
+  --kdedir=/usr/share/autostart \
+  --backends=/usr/lib${LIBDIRSUFFIX}/wicd/backends \
+  --wicdgroup=netdev \
+  || exit 1
+python setup.py install --root=$PKG || exit 1
+
+# Handle some Slackware defaults
+#   Use dhcpcd as the dhcp client
+#   Use kdesu as the graphical sudo application
+cat << EOF > $PKG/etc/wicd/manager-settings.conf.new
+[Settings]
+dhcp_client = 2
+sudo_app = 2
+EOF
+
+# Don't clobber dbus config on upgrade
+mv $PKG/etc/dbus-1/system.d/wicd.conf $PKG/etc/dbus-1/system.d/wicd.conf.new
+mv $PKG/etc/rc.d/rc.wicd $PKG/etc/rc.d/rc.wicd.new
+
+# Compress the man pages and add a bit to the package docs
+( cd $PKG/usr/man || exit 1
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -c n -l y $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz