Wed Feb 12 05:05:50 UTC 202020200212050550

Hey folks! PAM has finally landed in /testing. Some here wanted it to go
right into the main tree immediately, and in a more normal development cycle
I'd have been inclined to agree (it is -current, after all). But it's
probably better for it to appear in /testing first, to make sure we didn't
miss any bugs and also to serve as a warning shot that we'll be shaking up
the tree pretty good over the next few weeks. I'd like to see this merged
into the main tree in a day or two, so any testing is greatly appreciated.
Switching to the PAM packages (or reverting from them) is as easy as
installing all of them with upgradepkg --install-new, and if reverting then
remove the three leftover _pam packages. After reverting, a bit of residue
will remain in /etc/pam.d/ and /etc/security/ which can either be manually
deleted or simply ignored. While there are many more features available in
PAM compared with plain shadow, out of the box about the only noticable
change is the use of cracklib and libpwquality to check the quality of a
user-supplied password. Hopefully having PAM and krb5 will get us on track
to having proper Active Directory integration as well as using code paths
that are likely better audited these days. The attack surface *might* be
bigger, but it's also a lot better scrutinized.
Thanks to Robby Workman and Vincent Batts who did most of the initial heavy
lifting on the core PAM packages as a side project for many years. Thanks
also to Phantom X whose PAM related SlackBuilds were a valuable reference.
And thanks as well to ivandi - I learned a lot from the SlackMATE build
scripts and was even occasionally thankful for the amusing ways you would
kick my ass on LQ. ;-) You're more than welcome to let us know where we've
messed up this time.
The binutils and glibc packages in /testing were removed and are off the
table for now. I'm not seeing much upside to heading down that rabbit hole
at the moment. Next we need to be looking at Xfce 4.14 and Plasma 5.18 LTS
and some other things that have been held back since KDE4 couldn't use them.
Cheers! :-)
a/kernel-generic-5.4.19-x86_64-1.txz:  Upgraded.
a/kernel-huge-5.4.19-x86_64-1.txz:  Upgraded.
a/kernel-modules-5.4.19-x86_64-1.txz:  Upgraded.
a/lvm2-2.03.08-x86_64-1.txz:  Upgraded.
a/shadow-4.8.1-x86_64-2.txz:  Rebuilt.
  Automatically backup /etc/login.defs and install the new version if
  incompatible PAM options are detected.
d/kernel-headers-5.4.19-x86-1.txz:  Upgraded.
k/kernel-source-5.4.19-noarch-1.txz:  Upgraded.
  VALIDATE_FS_PARSER y -> n
xap/mozilla-thunderbird-68.5.0-x86_64-1.txz:  Upgraded.
  This release contains security fixes and improvements.
  For more information, see:
    https://www.mozilla.org/en-US/thunderbird/68.5.0/releasenotes/
    https://www.mozilla.org/en-US/security/advisories/mfsa2020-07/
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6793
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6794
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6795
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6797
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6798
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6792
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-6800
  (* Security fix *)
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
testing/packages/PAM/ConsoleKit2-1.2.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/at-3.2.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/cifs-utils-6.10-x86_64-2_pam.txz:  Added.
testing/packages/PAM/cracklib-2.9.7-x86_64-1_pam.txz:  Added.
testing/packages/PAM/cups-2.3.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/cyrus-sasl-2.1.27-x86_64-2_pam.txz:  Added.
testing/packages/PAM/dovecot-2.3.9.2-x86_64-1_pam.txz:  Added.
testing/packages/PAM/gnome-keyring-3.34.0-x86_64-1_pam.txz:  Added.
testing/packages/PAM/hplip-3.19.12-x86_64-2_pam.txz:  Added.
testing/packages/PAM/kde-workspace-4.11.22-x86_64-6_pam.txz:  Added.
testing/packages/PAM/libcap-2.31-x86_64-1_pam.txz:  Added.
testing/packages/PAM/libcgroup-0.41-x86_64-5_pam.txz:  Added.
testing/packages/PAM/libpwquality-1.4.2-x86_64-1_pam.txz:  Added.
testing/packages/PAM/mariadb-10.4.12-x86_64-1_pam.txz:  Added.
testing/packages/PAM/netatalk-3.1.12-x86_64-2_pam.txz:  Added.
testing/packages/PAM/netkit-rsh-0.17-x86_64-2_pam.txz:  Added.
testing/packages/PAM/openssh-8.1p1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/openvpn-2.4.8-x86_64-1_pam.txz:  Added.
testing/packages/PAM/pam-1.3.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/polkit-0.116-x86_64-1_pam.txz:  Added.
testing/packages/PAM/popa3d-1.0.3-x86_64-3_pam.txz:  Added.
testing/packages/PAM/ppp-2.4.7-x86_64-3_pam.txz:  Added.
testing/packages/PAM/proftpd-1.3.6b-x86_64-1_pam.txz:  Added.
testing/packages/PAM/samba-4.11.6-x86_64-1_pam.txz:  Added.
testing/packages/PAM/screen-4.8.0-x86_64-1_pam.txz:  Added.
testing/packages/PAM/shadow-4.8.1-x86_64-2_pam.txz:  Added.
testing/packages/PAM/sudo-1.8.31-x86_64-1_pam.txz:  Added.
testing/packages/PAM/system-config-printer-1.5.12-x86_64-2_pam.txz:  Added.
testing/packages/PAM/util-linux-2.35.1-x86_64-1_pam.txz:  Added.
testing/packages/PAM/vsftpd-3.0.3-x86_64-5_pam.txz:  Added.
testing/packages/PAM/xdm-1.1.11-x86_64-9_pam.txz:  Added.
testing/packages/PAM/xlockmore-5.62-x86_64-1_pam.txz:  Added.
testing/packages/PAM/xscreensaver-5.43-x86_64-1_pam.txz:  Added.
testing/packages/binutils-2.34-x86_64-1.txz:  Removed.
testing/packages/glibc-2.31-x86_64-1.txz:  Removed.
testing/packages/glibc-i18n-2.31-x86_64-1.txz:  Removed.
testing/packages/glibc-profile-2.31-x86_64-1.txz:  Removed.
testing/packages/glibc-solibs-2.31-x86_64-1.txz:  Removed.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

1 files changed, 7 insertions, 7 deletions

diff --git a/README.initrd b/README.initrd
index 801e1b347..0abfee938 100644
--- a/README.initrd
+++ b/README.initrd
@@ -1,7 +1,7 @@
 
 Slackware initrd mini HOWTO
 by Patrick Volkerding, volkerdi@slackware.com
-Thu Feb  6 01:37:10 UTC 2020
+Tue Feb 11 23:40:44 UTC 2020
 
 This document describes how to create and install an initrd, which may be 
 required to use the 4.x kernel. Also see "man mkinitrd".
@@ -33,15 +33,15 @@ flexible to ship a generic kernel and a set of kernel modules for it.
 
 The easiest way to make the initrd is to use the mkinitrd script included 
 in Slackware's mkinitrd package. We'll walk through the process of 
-upgrading to the generic 5.4.18 Linux kernel using the packages
+upgrading to the generic 5.4.19 Linux kernel using the packages
 found in Slackware's slackware/a/ directory.
 
 First, make sure the kernel, kernel modules, and mkinitrd package are 
 installed (the current version numbers might be a little different, so 
 this is just an example):
 
-  installpkg kernel-generic-5.4.18-x86_64-1.txz
-  installpkg kernel-modules-5.4.18-x86_64-1.txz
+  installpkg kernel-generic-5.4.19-x86_64-1.txz
+  installpkg kernel-modules-5.4.19-x86_64-1.txz
   installpkg mkinitrd-1.4.11-x86_64-14.txz
 
 Change into the /boot directory:
@@ -52,7 +52,7 @@ Now you'll want to run "mkinitrd". I'm using ext4 for my root filesystem,
 and since the disk controller requires no special support the ext4 module
 will be the only one I need to load:
 
-  mkinitrd -c -k 5.4.18 -m ext4
+  mkinitrd -c -k 5.4.19 -m ext4
 
 This should do two things. First, it will create a directory
 /boot/initrd-tree containing the initrd's filesystem. Then it will
@@ -61,10 +61,10 @@ you could make some additional changes in /boot/initrd-tree/ and
 then run mkinitrd again without options to rebuild the image. That's
 optional, though, and only advanced users will need to think about that.
 
-Here's another example: Build an initrd image using Linux 5.4.18
+Here's another example: Build an initrd image using Linux 5.4.19
 kernel modules for a system with an ext4 root partition on /dev/sdb3:
 
-  mkinitrd -c -k 5.4.18 -m ext4 -f ext4 -r /dev/sdb3
+  mkinitrd -c -k 5.4.19 -m ext4 -f ext4 -r /dev/sdb3
 
 
 4. Now that I've built an initrd, how do I use it?