#!/bin/bash
# Copyright 2008, 2009, 2010, 2011, 2013, 2016, 2018 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
cd $(dirname $0) ; CWD=$(pwd)
PKGNAM=nfs-utils
VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
BUILD=${BUILD:-1}
# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) export ARCH=i586 ;;
arm*) export ARCH=arm ;;
# Unless $ARCH is already set, use uname -m for all other archs:
*) export ARCH=$( uname -m ) ;;
esac
fi
# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
# the name of the created package would be, and then exit. This information
# could be useful to other scripts.
if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
exit 0
fi
NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
if [ "$ARCH" = "i586" ]; then
SLKCFLAGS="-O2 -march=i586 -mtune=i686"
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
else
SLKCFLAGS="-O2"
fi
TMP=${TMP:-/tmp}
PKG=$TMP/package-nfs-utils
rm -rf $PKG
mkdir -p $TMP $PKG
# Add defaults file:
mkdir -p $PKG/etc/default
cat $CWD/nfs.default > $PKG/etc/default/nfs.new
# Add startup script:
mkdir -p $PKG/etc/rc.d
cat $CWD/rc.nfsd > $PKG/etc/rc.d/rc.nfsd.new
# Off by default, unless there's a previous version that's turned on:
chmod 644 $PKG/etc/rc.d/rc.nfsd.new
# Add /etc/exports:
cp -a $CWD/exports $PKG/etc/exports.new
chown root:root $PKG/etc/exports.new
chmod 644 $PKG/etc/exports.new
cd $TMP
rm -rf nfs-utils-$VERSION
tar xvf $CWD/nfs-utils-$VERSION.tar.?z || exit 1
cd nfs-utils-$VERSION || exit 1
zcat $CWD/nfs-utils.lwrap.needs.lnsl.diff.gz | patch -p1 --verbose || exit 1
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
# No NFSv4 yet -- it requires additional libraries.
CFLAGS="$SLKCFLAGS" \
./configure \
--prefix=/usr \
--mandir=/usr/man \
--with-statedir=/var/lib/nfs \
--enable-mountconfig \
--enable-nfsv4=no \
--enable-gss=no \
--enable-tirpc=yes \
--program-prefix= \
--program-suffix= \
--build=$ARCH-slackware-linux || exit 1
make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1
# Add nfsmount.conf and man page:
cat ./utils/mount/nfsmount.conf > $PKG/etc/nfsmount.conf.new
mkdir -p $PKG/usr/man/man5
cat ./utils/mount/nfsmount.conf.man > $PKG/usr/man/man5/nfsmount.conf.5
# Set default protocol version 3:
sed -i "s/# Defaultvers=4/Defaultvers=3/g" $PKG/etc/nfsmount.conf.new
# These might be in use:
( cd $PKG/var/lib/nfs
for config_file in etab rmtab state ; do
mv ${config_file} ${config_file}.new
done
)
# No NFSv4 yet, so remove these:
rm -f $PKG/sbin/*nfs4
# This should move to support /usr on NFS:
mkdir -p $PKG/sbin
mv $PKG/usr/sbin/rpc.statd $PKG/sbin
( cd $PKG/usr/sbin ; ln -sf ../../sbin/rpc.statd . )
# Chown /var/lib/nfs so that rpc.statd runs as rpc:rpc:
chown -R rpc:rpc $PKG/var/lib/nfs
# Create log directory:
mkdir -p $PKG/var/log/nfsd
find $PKG | xargs file | grep -e "executable" -e "shared object" \
| grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
mkdir -p $PKG/usr/doc/nfs-utils-$VERSION
cp -a \
AUTHORS COPYING* INSTALL NEWS README* \
$PKG/usr/doc/nfs-utils-$VERSION
mkdir -p $PKG/usr/doc/nfs-utils-$VERSION/statd
cp -a \
utils/statd/COPYING utils/statd/COPYRIGHT utils/statd/TODO \
$PKG/usr/doc/nfs-utils-$VERSION/statd
# If there's a ChangeLog, installing at least part of the recent history
# is useful, but don't let it get totally out of control:
if [ -r ChangeLog ]; then
DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
touch -r ChangeLog $DOCSDIR/ChangeLog
fi
# Compress and if needed symlink the man pages:
if [ -d $PKG/usr/man ]; then
( cd $PKG/usr/man
for manpagedir in $(find . -type d -name "man*") ; do
( cd $manpagedir
for eachpage in $( find . -type l -maxdepth 1) ; do
ln -s $( readlink $eachpage ).gz $eachpage.gz
rm $eachpage
done
gzip -9 *.?
)
done
)
fi
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
# Build the package:
cd $PKG
/sbin/makepkg -l y -c n $TMP/nfs-utils-$VERSION-$ARCH-$BUILD.txz