#!/bin/sh
# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
VERSION=${VERSION:-$(echo gtk+-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
BUILD=${BUILD:-1}
NUMJOBS=${NUMJOBS:-" -j7 "}
# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) export ARCH=i486 ;;
arm*) export ARCH=arm ;;
# Unless $ARCH is already set, use uname -m for all other archs:
*) export ARCH=$( uname -m ) ;;
esac
fi
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-gtk2
if [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi
rm -rf $PKG
mkdir -p $TMP $PKG/usr
cd $TMP
rm -rf gtk+-$VERSION
tar xvf $CWD/gtk+-$VERSION.tar.?z* || exit 1
cd gtk+-$VERSION
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
# There's been this long standing debate about PNG and -lz
# and this patch is the workaround. ;-)
zcat $CWD/gtk.pnglz.diff.gz | patch -p1 --verbose || exit 1
# Do not flood the console or .xsession-errors with "trouble ahead"
# warnings (most noticable when using Firefox and Flash):
zcat $CWD/gtk.xid.nowarningflood.diff.gz | patch -p1 --verbose || exit 1
# Use /etc/gtk-2.0/$ARCH-slackware-linux instead of /etc/gtk-2.0/
sed -i "s/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\"/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\", HOST/g" ./gtk/gtkrc.c ./gdk-pixbuf/gdk-pixbuf-io.c
sed -i 's/sysconfdir)\\"/& \\\n\t-DHOST=\\\"$(host_triplet)\\\"/g' \
gdk-pixbuf/Makefile.am \
gtk/Makefile.am \
modules/input/Makefile.am
# Use libpng-1.4.x:
zcat $CWD/gtk.png14.diff.gz | patch -p1 --verbose || exit 1
# Regenerate ./configure:
libtoolize --force
autoreconf -vif
# Autoconf changes linux to linux-gnu.
# Our host is $ARCH-slackware-linux not $ARCH-slackware-linux-gnu:
sed -i -e 's#linux|linux-gnu|#linux|linux|#' config.sub
CFLAGS="$SLKCFLAGS -DHOST='"'"${ARCH}-slackware-linux"'"'" \
./configure \
--prefix=/usr \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--sysconfdir=/etc \
--mandir=/usr/man \
--with-xinput=yes \
--build=$ARCH-slackware-linux
make $NUMJOBS || make || exit 1
# Check the host value that is passed to the compile to the one in this script:
host="$ARCH-slackware-linux"
compile_host=$(grep 'host_triplet =' gtk/Makefile | sed -e "s/.* = //")
if [ "x$compile_host" != "x$host" ]; then
echo "Host mismatch: compile='$compile_host', SlackBuild='$host'" && exit 1
fi
make install DESTDIR=$PKG \
RUN_QUERY_IMMODULES_TEST=false RUN_QUERY_LOADER_TEST=false \
|| exit 1
# I'm spamming your root partition because /etc/gtk-2.0 won't install to $DESTDIR
make install || exit 1
cp -a /etc/gtk-2.0/* $PKG/etc/gtk-2.0/ || exit 1
rm -rf $PKG/etc/gtk-2.0/$host
mkdir -p $PKG/etc/gtk-2.0/$host
mv $PKG/etc/gtk-2.0/* $PKG/etc/gtk-2.0/$host/
mv $PKG/etc/gtk-2.0/$host/im-multipress.conf $PKG/etc/gtk-2.0/$host/im-multipress.conf.new || exit 1
# We need to have separate 32-bit and 64-bit binaries
# for places where we have two copies of the GTK+ package installed.
# (we might have x86_64 and i486 packages on the same system, for example.)
case "$host" in
s390x*|x86_64*)
mv $PKG/usr/bin/gtk-query-immodules-2.0{,-64}
mv $PKG/usr/bin/gdk-pixbuf-query-loaders{,-64}
( cd $PKG/usr/bin
ln -sf gtk-query-immodules-2.0-64 gtk-query-immodules-2.0
ln -sf gdk-pixbuf-query-loaders-64 gdk-pixbuf-query-loaders
)
;;
*)
mv $PKG/usr/bin/gtk-query-immodules-2.0{,-32}
mv $PKG/usr/bin/gdk-pixbuf-query-loaders{,-32}
( cd $PKG/usr/bin
ln -sf gtk-query-immodules-2.0-32 gtk-query-immodules-2.0
ln -sf gdk-pixbuf-query-loaders-32 gdk-pixbuf-query-loaders
)
;;
esac
# Install wrappers for the binaries:
cp $CWD/update-gdk-pixbuf-loaders $PKG/usr/bin/update-gdk-pixbuf-loaders
cp $CWD/update-gtk-immodules $PKG/usr/bin/update-gtk-immodules
chmod 0755 $PKG/usr/bin/update-*
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
| cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
# Compress and if needed symlink the man pages:
if [ -d $PKG/usr/man ]; then
( cd $PKG/usr/man
for manpagedir in $(find . -type d -name "man*") ; do
( cd $manpagedir
for eachpage in $( find . -type l -maxdepth 1) ; do
ln -s $( readlink $eachpage ).gz $eachpage.gz
rm $eachpage
done
gzip -9 *.?
)
done
)
fi
mkdir -p $PKG/usr/doc/gtk+-$VERSION
cp -a \
AUTHORS COPYING NEWS README TODO \
$PKG/usr/doc/gtk+-$VERSION
( cd $PKG/usr/doc/gtk+-$VERSION
ln -s /usr/share/gtk-doc/html/gail-libgail-util .
ln -s /usr/share/gtk-doc/html/gdk .
ln -s /usr/share/gtk-doc/html/gdk-pixbuf .
ln -s /usr/share/gtk-doc/html/gtk .
)
# If there's a ChangeLog, installing at least part of the recent history
# is useful, but don't let it get totally out of control:
if [ -r ChangeLog ]; then
DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
touch -r ChangeLog $DOCSDIR/ChangeLog
fi
# I'm almost inclined to think this stuff is obsolete but I don't know for sure.
# I do know that leaving it in doesn't hurt (aside from a few wasted bytes, but
# probably less than the comments here waste ;-)
mkdir -p $PKG/etc/profile.d
cp -a $CWD/profile.d/* $PKG/etc/profile.d
chmod 755 $PKG/etc/profile.d/*
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
cd $PKG
/sbin/makepkg -l y -c n $TMP/gtk+2-$VERSION-$ARCH-$BUILD.txz