#!/bin/bash
# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
## build glibc-$VERSION for Slackware
cd $(dirname $0) ; CWD=$(pwd)
PKGNAM=glibc
VERSION=${VERSION:-$(echo glibc-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
CHECKOUT=${CHECKOUT:-""}
BUILD=${BUILD:-4}
# I was considering disabling NSCD, but MoZes talked me out of it. :)
#DISABLE_NSCD=" --disable-nscd "
# $ARCH may be preset, otherwise i586 compatibility with i686 binary
# structuring is the Slackware default.
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) export ARCH=i586 ;;
arm*) export ARCH=arm ;;
# Unless $ARCH is already set, use uname -m for all other archs:
*) export ARCH=$( uname -m ) ;;
esac
fi
# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
# the name of the created package would be, and then exit. This information
# could be useful to other scripts.
if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
echo "glibc-$VERSION-$ARCH-$BUILD.txz"
echo "glibc-i18n-$VERSION-$ARCH-$BUILD.txz"
echo "glibc-profile-$VERSION-$ARCH-$BUILD.txz"
echo "glibc-solibs-$VERSION-$ARCH-$BUILD.txz"
exit 0
fi
# I'll break this out as an option for fun :-)
case $ARCH in
i386)
OPTIMIZ="-O3 -march=i386 -mcpu=i686"
LIBDIRSUFFIX=""
;;
i486)
OPTIMIZ="-O3 -march=i486 -mtune=i686"
LIBDIRSUFFIX=""
;;
i586)
OPTIMIZ="-O3 -march=i586 -mtune=i686"
LIBDIRSUFFIX=""
;;
i686)
OPTIMIZ="-O3 -march=i686"
LIBDIRSUFFIX=""
;;
athlon)
OPTIMIZ="-O3 -march=athlon"
LIBDIRSUFFIX=""
;;
s390)
OPTIMIZ="-O3"
LIBDIRSUFFIX=""
;;
x86_64)
OPTIMIZ="-O3 -fPIC"
LIBDIRSUFFIX="64"
;;
*)
OPTIMIZ="-O3"
LIBDIRSUFFIX=""
;;
esac
case $ARCH in
x86_64)
TARGET=${TARGET:-x86_64}
;;
i586)
# This should be i586 for all 32-bit x86 arch:
TARGET=${TARGET:-i586}
;;
esac
# Hand off the $ARCH variable to $SLACKWARE_ARCH to avoid confusing glibc:
SLACKWARE_ARCH=$ARCH
unset ARCH
CVSVER=${VERSION}${CHECKOUT}
# NOTE!!! glibc needs to be built against the sanitized kernel headers,
# which will be installed under /usr/include by the kernel-headers package.
# Be sure the correct version of the headers package is installed BEFORE
# building glibc!
TMP=${TMP:-/tmp}
mkdir -p $TMP
NUMJOBS=${NUMJOBS:-" -j7 "}
# This function fixes a doinst.sh file for x86_64.
# With thanks to Fred Emmott.
fix_doinst() {
if [ "x$LIBDIRSUFFIX" = "x" ]; then
return;
fi;
# Fix "( cd usr/lib ;" occurrences
sed -i "s#lib ;#lib${LIBDIRSUFFIX} ;#" install/doinst.sh
# Fix "lib/" occurrences
sed -i "s#lib/#lib${LIBDIRSUFFIX}/#g" install/doinst.sh
# Fix "( cd lib" occurrences
sed -i "s#( cd lib\$#( cd lib${LIBDIRSUFFIX}#" install/doinst.sh
if [ "$SLACKWARE_ARCH" = "x86_64" ]; then
sed -i 's#ld-linux.so.2#ld-linux-x86-64.so.2#' install/doinst.sh
fi
}
# This is a patch function to put all glibc patches in the build script
# up near the top.
apply_patches() {
# Use old-style locale directories rather than a single (and strangely
# formatted) /usr/lib/locale/locale-archive file:
zcat $CWD/glibc.locale.no-archive.diff.gz | patch -p1 --verbose || exit 1
# Support ru_RU.CP1251 locale:
zcat $CWD/glibc.ru_RU.CP1251.diff.gz | patch -p1 --verbose || exit 1
# Add a C.UTF-8 locale:
zcat $CWD/glibc-c-utf8-locale.patch.gz | patch -p1 --verbose || exit 1
# Linux: use reserved name __key in pkey_get [BZ #22797]:
zcat $CWD/glibc.pkey_get.56170e0.diff.gz | patch -p1 --verbose || exit 1
}
# This is going to be the initial $DESTDIR:
export PKG=$TMP/package-glibc-incoming-tree
PGLIBC=$TMP/package-glibc
PSOLIBS=$TMP/package-glibc-solibs
PI18N=$TMP/package-glibc-i18n
PPROFILE=$TMP/package-glibc-profile
PDEBUG=$TMP/package-glibc-debug
# Empty these locations first:
for dir in $PKG $PGLIBC $PSOLIBS $PZONE $PI18N $PPROFILE $PDEBUG ; do
if [ -d $dir ]; then
rm -rf $dir
fi
mkdir -p $dir
done
if [ -d $TMP/glibc-$VERSION ]; then
rm -rf $TMP/glibc-$VERSION
fi
# Create an incoming directory structure for glibc to be built into:
mkdir -p $PKG/lib${LIBDIRSUFFIX}
mkdir -p $PKG/sbin
mkdir -p $PKG/usr/bin
mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
mkdir -p $PKG/usr/sbin
mkdir -p $PKG/usr/include
mkdir -p $PKG/usr/doc
mkdir -p $PKG/usr/man
mkdir -p $PKG/usr/share
mkdir -p $PKG/var/db/nscd
mkdir -p $PKG/var/run/nscd
# Begin extract/compile:
cd $TMP
rm -rf glibc-$CVSVER
tar xvf $CWD/glibc-$CVSVER.tar.xz \
|| tar xvf $CWD/glibc-$CVSVER.tar.bz2 \
|| tar xvf $CWD/glibc-$CVSVER.tar.gz
cd glibc-$CVSVER
chown -R root:root .
find . -perm 666 -exec chmod 644 {} \;
find . -perm 664 -exec chmod 644 {} \;
find . -perm 600 -exec chmod 644 {} \;
find . -perm 444 -exec chmod 644 {} \;
find . -perm 400 -exec chmod 644 {} \;
find . -perm 440 -exec chmod 644 {} \;
find . -perm 777 -exec chmod 755 {} \;
find . -perm 775 -exec chmod 755 {} \;
find . -perm 511 -exec chmod 755 {} \;
find . -perm 711 -exec chmod 755 {} \;
find . -perm 555 -exec chmod 755 {} \;
# Clean up leftover CVS directories:
find . -type d -name CVS -exec rm -r {} \; 2> /dev/null
# Apply patches; exit if any fail.
apply_patches
if [ ! $? = 0 ]; then
exit 1
fi
# Make build directory:
mkdir build-glibc-$VERSION
cd build-glibc-$VERSION || exit 1
echo "BUILDING DAS NPTL GLIBC"
CFLAGS="-g $OPTIMIZ" \
../configure \
--prefix=/usr \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--enable-kernel=2.6.32 \
--with-headers=/usr/include \
--enable-add-ons \
--enable-obsolete-nsl \
--enable-obsolete-rpc \
--enable-profile \
$DISABLE_NSCD \
--infodir=/usr/info \
--mandir=/usr/man \
--with-tls \
--with-__thread \
--without-cvs \
$TARGET-slackware-linux
make $NUMJOBS || make || exit 1
make install install_root=$PKG || exit 1
make localedata/install-locales install_root=$PKG || exit 1
# The prevailing standard seems to be putting unstripped libraries in
# /usr/lib/debug/ and stripping the debugging symbols from all the other
# libraries.
mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/debug
cp -a $PKG/lib${LIBDIRSUFFIX}/l*.so* $PKG/usr/lib${LIBDIRSUFFIX}/debug
cp -a $PKG/usr/lib${LIBDIRSUFFIX}/*.a $PKG/usr/lib${LIBDIRSUFFIX}/debug
# Don't need debug+profile:
( cd $PKG/usr/lib${LIBDIRSUFFIX}/debug ; rm -f *_p.* )
# NOTE: Is there really a reason for the glibc-debug package?
# If you're debugging glibc, you can also compile it, right?
## COMMENTED OUT: There's no reason for profile libs to include -g information.
## Put back unstripped profiling libraries:
#mv $PKG/usr/lib${LIBDIRSUFFIX}/debug/*_p.a $PKG/usr/lib${LIBDIRSUFFIX}
# It might be best to put the unstripped and profiling libraries in glibc-debug and glibc-profile.
# I don't think "strip -g" causes the pthread problems. It's --strip-unneeded that does.
strip -g $PKG/lib${LIBDIRSUFFIX}/l*.so*
strip -g $PKG/usr/lib${LIBDIRSUFFIX}/l*.so*
strip -g $PKG/usr/lib${LIBDIRSUFFIX}/lib*.a
# Remove the rquota.x and rquota.h include files, as they are provided by
# the quota package:
rm -f $PKG/usr/include/rpcsvc/rquota.{h,x}
# Back to the sources dir to add some files/docs:
cd $TMP/glibc-$CVSVER
# We'll automatically install the config file for the Name Server Cache Daemon.
# Perhaps this should also have some commented-out startup code in rc.inet2...
mkdir -p $PKG/etc
cat nscd/nscd.conf > $PKG/etc/nscd.conf.new
# Install docs:
( mkdir -p $PKG/usr/doc/glibc-$VERSION
cp -a \
BUGS CONFORMANCE COPYING* FAQ INSTALL LICENSES NAMESPACE \
NEWS NOTES PROJECTS README* \
$PKG/usr/doc/glibc-$VERSION
)
# Trim the NEWS file to omit ancient history:
if [ -r NEWS ]; then
DOCSDIR=$(echo $PKG/usr/doc/glibc-$VERSION)
cat NEWS | head -n 1000 > $DOCSDIR/NEWS
touch -r NEWS $DOCSDIR/NEWS
fi
# OK, there are some very old Linux standards that say that any binaries in a /bin or
# /sbin directory (and the directories themselves) should be group bin rather than
# group root, unless a specific group is really needed for some reason.
#
# I can't find any mention of this in more recent standards docs, and always thought
# that it was pretty cosmetic anyway (hey, if there's a reason -- fill me in!), so
# it's possible that this ownership change won't be followed in the near future
# (it's a PITA, and causes many bug reports when the perms change is occasionally
# forgotten).
#
# But, it's hard to get me to break old habits, so we'll continue the tradition here:
#
# No, no we won't. You know how we love to break traditions.
# Strip most binaries:
( cd $PKG
find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null
find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
)
# Fix info dir:
rm $PKG/usr/info/dir
gzip -9 $PKG/usr/info/*
# This is junk
rm $PKG/etc/ld.so.cache
( cd $PKG
find . -name "*.orig" -exec rm {} \;
)
##################################
# OK, time to make some packages #
##################################
# glibc-profile:
cd $PPROFILE
mkdir -p usr/lib${LIBDIRSUFFIX}
# Might as well just grab these with 'mv' to simplify things later:
mv $PKG/usr/lib${LIBDIRSUFFIX}/lib*_p.a usr/lib${LIBDIRSUFFIX}
# Profile libs should be stripped. Use the debug libs to debug...
( cd usr/lib${LIBDIRSUFFIX} ; strip -g *.a )
mkdir install
cp -a $CWD/slack-desc.glibc-profile install/slack-desc
makepkg -l y -c n $TMP/glibc-profile-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
# THIS IS NO LONGER PACKAGED (or is it? might be better to let it be made, and then ship it or not...)
# glibc-debug:
cd $PDEBUG
mkdir -p usr/lib${LIBDIRSUFFIX}
# Might as well just grab these with 'mv' to simplify things later:
mv $PKG/usr/lib${LIBDIRSUFFIX}/debug usr/lib${LIBDIRSUFFIX}
mkdir install
cp -a $CWD/slack-desc.glibc-debug install/slack-desc
## Don't package this:
#makepkg -l y -c n $TMP/glibc-debug-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
## INSTEAD, NUKE THESE LIBS
#rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/debug
# glibc-i18n:
cd $PI18N
mkdir -p usr/lib${LIBDIRSUFFIX}/locale
mv $PKG/usr/lib${LIBDIRSUFFIX}/locale/* usr/lib${LIBDIRSUFFIX}/locale
mkdir -p usr/share/{i18n,locale}
mv $PKG/usr/share/i18n/* usr/share/i18n
mv $PKG/usr/share/locale/* usr/share/locale
# Leave copies of the C, POSIX, and en_US locales in the main glibc package:
cp -a usr/lib${LIBDIRSUFFIX}/locale/{C,en_US}* $PKG/usr/lib${LIBDIRSUFFIX}/locale
mkdir -p $PKG/usr/share/i18n/locales
cp -a usr/share/i18n/locales/{C,POSIX,en_US} $PKG/usr/share/i18n/locales
mkdir install
cp -a $CWD/slack-desc.glibc-i18n install/slack-desc
makepkg -l y -c n $TMP/glibc-i18n-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
# glibc-solibs:
cd $PSOLIBS
mkdir -p etc/profile.d
cp -a $CWD/profile.d/* etc/profile.d
chown -R root:root etc
chmod 755 etc/profile.d/*
mkdir -p lib${LIBDIRSUFFIX}
cp -a $PKG/lib${LIBDIRSUFFIX}/* lib${LIBDIRSUFFIX}
( cd lib${LIBDIRSUFFIX}
mkdir incoming
mv *so* incoming
mv incoming/libSegFault.so .
)
mkdir -p usr
cp -a $PKG/usr/bin usr
mv usr/bin/ldd .
rm usr/bin/*
mv ldd usr/bin
mkdir -p usr/lib${LIBDIRSUFFIX}
# The gconv directory has a lot of stuff, but including it here will save some problems.
# Seems standard elsewhere.
cp -a $PKG/usr/lib${LIBDIRSUFFIX}/gconv usr/lib${LIBDIRSUFFIX}
# Another manpage abandoned by GNU...
#mkdir -p usr/man/man1
#cp -a $PKG/usr/man/man1/ldd.1.gz usr/man/man1
mkdir -p usr/libexec
cp -a $PKG/usr/libexec/pt_chown usr/libexec
# Same usr.bin deal:
cp -a $PKG/sbin .
mv sbin/ldconfig .
rm sbin/*
mv ldconfig sbin
mkdir install
cp -a $CWD/slack-desc.glibc-solibs install/slack-desc
cp -a $CWD/doinst.sh-glibc-solibs install/doinst.sh
fix_doinst
sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh
# Ditch links:
find . -type l -exec rm {} \;
# Build the package:
makepkg -l y -c n $TMP/glibc-solibs-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
# And finally, the complete "all-in-one" glibc package is created
# from whatever was leftover:
cd $PGLIBC
mv $PKG/* .
mkdir -p etc/profile.d
cp -a $CWD/profile.d/* etc/profile.d
chown -R root:root etc
chmod 755 etc/profile.d/*
# Ditch links (these are in doinst.sh-glibc):
find . -type l -exec rm {} \;
# libm.so is *not* a linker script on all $ARCH.
# If it's missing now, replace the symlink:
if [ ! -r usr/lib${LIBDIRSUFFIX}/libm.so ]; then
( cd usr/lib${LIBDIRSUFFIX} ; ln -sf ../../lib${LIBDIRSUFFIX}/libm.so.6 libm.so )
fi
mkdir install
cp -a $CWD/slack-desc.glibc install/slack-desc
cp -a $CWD/doinst.sh-glibc install/doinst.sh
fix_doinst
sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh
( cd lib${LIBDIRSUFFIX}
mkdir incoming
mv *so* incoming
mv incoming/libSegFault.so .
)
# Build the package:
/sbin/makepkg -l y -c n $TMP/glibc-$VERSION-$SLACKWARE_ARCH-$BUILD.txz
# Done!
echo
echo "glibc packages built in $TMP!"
