#!/bin/sh
#
# Copyright 2011 Eric Hameleers, Eindhoven, NL
# Copyright 2011 Patrick Volkerding, Sebeka, Minnesota USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Bug reports, suggestions, etc for pxesetup: alien@slackware.com
#
TMP=/var/log/setup/tmp
if [ ! -d $TMP ]; then
mkdir -p $TMP
fi
# Function to convert the netmask from CIDR format to dot notation.
cidr_cvt() {
inform=$1
if [ $inform -ge 32 ]; then outform='255.255.255.255'
elif [ $inform -ge 31 ]; then outform='255.255.255.254'
elif [ $inform -ge 30 ]; then outform='255.255.255.252'
elif [ $inform -ge 29 ]; then outform='255.255.255.248'
elif [ $inform -ge 28 ]; then outform='255.255.255.240'
elif [ $inform -ge 27 ]; then outform='255.255.255.224'
elif [ $inform -ge 26 ]; then outform='255.255.255.192'
elif [ $inform -ge 25 ]; then outform='255.255.255.128'
elif [ $inform -ge 24 ]; then outform='255.255.255.0'
elif [ $inform -ge 23 ]; then outform='255.255.254.0'
elif [ $inform -ge 22 ]; then outform='255.255.252.0'
elif [ $inform -ge 21 ]; then outform='255.255.248.0'
elif [ $inform -ge 20 ]; then outform='255.255.240.0'
elif [ $inform -ge 19 ]; then outform='255.255.224.0'
elif [ $inform -ge 18 ]; then outform='255.255.192.0'
elif [ $inform -ge 17 ]; then outform='255.255.128.0'
elif [ $inform -ge 16 ]; then outform='255.255.0.0'
elif [ $inform -ge 15 ]; then outform='255.254.0.0'
elif [ $inform -ge 14 ]; then outform='255.252.0.0'
elif [ $inform -ge 13 ]; then outform='255.248.0.0'
elif [ $inform -ge 12 ]; then outform='255.240.0.0'
elif [ $inform -ge 11 ]; then outform='255.224.0.0'
elif [ $inform -ge 10 ]; then outform='255.192.0.0'
elif [ $inform -ge 9 ]; then outform='255.128.0.0'
elif [ $inform -ge 8 ]; then outform='255.0.0.0'
elif [ $inform -ge 7 ]; then outform='254.0.0.0'
elif [ $inform -ge 6 ]; then outform='252.0.0.0'
elif [ $inform -ge 5 ]; then outform='248.0.0.0'
elif [ $inform -ge 4 ]; then outform='240.0.0.0'
elif [ $inform -ge 3 ]; then outform='224.0.0.0'
elif [ $inform -ge 2 ]; then outform='192.0.0.0'
elif [ $inform -ge 1 ]; then outform='128.0.0.0'
elif [ $inform -ge 0 ]; then outform='0.0.0.0'
fi
echo $outform
}
# IP Address to integer conversion and back:
ip_to_int() {
IFS=.
set -f
set -- $1
echo $(($1 << 24 | $2 << 16 | $3 << 8 | $4))
}
int_to_ip() {
echo $(($1>>24)).$(($1>>16&0xff)).$(($1>>8&0xff)).$(($1&0xff))
}
# PXE configuration file:
echo "" > $TMP/SeTpxe
# Find out what interface we are using.
# Does the commandline have NIC information for us?
# Format is 'nic=driver:interface:<dhcp|static>:ip:mask:gw'
unset INTERFACE
for CMDELEM in $(cat /proc/cmdline) ; do
if $(echo $CMDELEM | grep -q "^nic=") ; then
INTERFACE=$(echo $DRIVER | cut -f2 -d:)
fi
done
if [ "x$INTERFACE" = "x" ]; then # the cmdline did not provide a nic
INTERFACE=$(ip -f inet -o addr show |tr -s ' ' |grep -v " lo " |cut -f2 -d' ' |head -1)
fi
if [ "x$INTERFACE" = "x" ]; then # no network was configured at all?!?
cat <<EOF > $TMP/tempmsg
Apparently you forgot to configure a network interface? \n\
A PXE Server needs a configured network interface to work.\n\
Please try again!
EOF
dialog --title "UNCONFIGURED NETWORK DEVICE" --msgbox "$(cat $TMP/tempmsg)" 9 68
rm -f $TMP/tempmsg
exit 1
fi
# If there is a DHCP server on the network, we should not activate one now:
if [ -r $TMP/Pdhcp ]; then
DHCP="no"
elif [ -s /etc/dhcpc/dhcpcd-${INTERFACE}.info ]; then
DHCP="no"
else
# Assume nothing... we will ask the user for confirmation later!
DHCP="yes"
fi
# Start the interactive part:
dialog --backtitle "Slackware PXE Server." \
--title "WELCOME TO PXE CONFIGURATION" --msgbox "\
We will be asking you a few questions now.\n\
The answers will be used to start a PXE service on this computer \
which does not interfere with other services in your network.\
\n\
The only assumption is, that there is NO PXE service running \
on your local network at this moment.
\n\
If in doubt, leave the defaults." 0 0
if [ "$DHCP" = "yes" ]; then
# Be extra safe. Do not start a DHCP server if the user denies it:
dialog --title "ENABLE DHCP SERVER" --yesno " \
No active DHCP server was found on your local network. \
The Slackware PXE server needs a working DHCP server.\n\
Do you want this computer to start its own DHCP server \
(you can control what IP addresses are used by the DHCP server)?\n\
Say 'YES' if you are certain your network has no DHCP server." 9 68
if [ $? = 0 ]; then
DHCP="yes"
else
DHCP="no"
fi
fi
# Assemble the network parameters:
LOCAL_IPADDR=$(ip -f inet -o addr show |tr -s ' ' |grep -v " lo " |head -1 |cut -f4 -d' ' |cut -f1 -d/)
LOCAL_NETMASK=$(ip -f inet -o addr show |tr -s ' ' |grep -v " lo " |head -1 |cut -f4 -d' ' |cut -f2 -d/)
LOCAL_GATEWAY=$(ip -f inet -o route show default |tr -s ' ' |cut -f3 -d' ')
LOCAL_NETMASK=$(cidr_cvt $LOCAL_NETMASK)
LOCAL_BROADCAST=$(ipmask $LOCAL_NETMASK $LOCAL_IPADDR |cut -f 1 -d ' ')
LOCAL_NETWORK=$(ipmask $LOCAL_NETMASK $LOCAL_IPADDR |cut -f 2 -d ' ')
if [ "$DHCP" = "yes" ]; then
# Find out a suitable IP address range for the DHCP server. Involves magic:
I_LOCAL_IPADDR=$(ip_to_int "$LOCAL_IPADDR")
I_LOCAL_NETMASK=$(ip_to_int "$LOCAL_NETMASK")
I_MINLEASE_IP=$(( ($I_LOCAL_IPADDR & $I_LOCAL_NETMASK) + 1 ))
I_MAXLEASE_IP=$(( ($I_LOCAL_IPADDR | ${I_LOCAL_NETMASK}^0xffffffff) - 1 ))
if [ $(($I_MAXLEASE_IP - $I_LOCAL_IPADDR)) -ge 10 ]; then
# Use ten IP addresses in the top of the address range:
I_MINLEASE_IP=$(($I_MAXLEASE_IP - 9))
elif [ $(($I_LOCAL_IPADDR - $I_MINLEASE_IP)) -ge 10 ]; then
# Use ten IP addresses in the bottom of the address range:
I_MAXLEASE_IP=$(($I_MINLEASE_IP + 9))
else
# Small range, use what we can get:
I_MINLEASE_IP=$(($I_LOCAL_IPADDR + 1))
fi
MINLEASE_IP=$(int_to_ip "$I_MINLEASE_IP")
MAXLEASE_IP=$(int_to_ip "$I_MAXLEASE_IP")
while [ 0 ]; do
( dialog --stdout --backtitle "Slackware PXE Server." \
--title "DHCP SERVER CONFIGURATION" \
--cancel-label Restart \
--form "\
The PXE Service is going to run on $INTERFACE with these values \
(the defaults should be OK). \n\
You can change the range of IP addresses used by the DHCP server, if \
IP addresses in the proposed range are used by computers in your LAN. \
For instance, your default gateway if you have one. \n\
\n\
Also note that we will not validate any changes you make:" \
18 68 0 \
"IP Address:" 1 1 "$LOCAL_IPADDR" 1 30 0 0 \
"Netmask:" 2 1 "$LOCAL_NETMASK" 2 30 0 0 \
"Gateway:" 3 1 "$LOCAL_GATEWAY" 3 30 0 0 \
"Lowest DHCP Client Address:" 4 1 "$MINLEASE_IP" 4 30 15 0 \
"Highest DHCP Client Address:" 5 1 "$MAXLEASE_IP" 5 30 15 0 \
) > $TMP/tempopts
if [ $? = 0 ]; then
# Remember... busybox ash is no good with arrays :/
local i=0
rm $TMP/tempkeys
cat $TMP/tempopts | while read VALUE ; do
if [ $i = 0 ]; then echo "MINLEASE_IP=\"$VALUE\"" >> $TMP/tempkeys
elif [ $i = 1 ]; then echo "MAXLEASE_IP=\"$VALUE\"" >> $TMP/tempkeys
fi
i=$(expr $i + 1)
done
eval $(cat $TMP/tempkeys)
rm $TMP/tempopts
break
fi
done
fi # [ "$DHCP" = "yes" ]
echo "DHCP=${DHCP}" >> $TMP/SeTpxe
echo "LOCAL_IPADDR=${LOCAL_IPADDR}" >> $TMP/SeTpxe
echo "LOCAL_NETMASK=${LOCAL_NETMASK}" >> $TMP/SeTpxe
echo "LOCAL_GATEWAY=${LOCAL_GATEWAY}" >> $TMP/SeTpxe
echo "LOCAL_BROADCAST=${LOCAL_BROADCAST}" >> $TMP/SeTpxe
echo "LOCAL_NETWORK=${LOCAL_NETWORK}" >> $TMP/SeTpxe
echo "MINLEASE_IP=${MINLEASE_IP}" >> $TMP/SeTpxe
echo "MAXLEASE_IP=${MAXLEASE_IP}" >> $TMP/SeTpxe
# Write out a suitable dnsmasq configuration:
cat <<EOF > /etc/dnsmasq.conf
# We do not need dnsmasq to function as a DNS server:
port=0
# Write the pid file:
pid-file=/var/run/dnsmasq.pid
# Start a TFTP server:
enable-tftp
# Set the root directory for files available via FTP:
tftp-root=/var/lib/tftpboot
# The boot filename:
dhcp-boot=/pxelinux.0
# Disable re-use of the DHCP servername and filename fields as extra
# option space. That's to avoid confusing some old or broken DHCP clients.
dhcp-no-override
# Log connections so that we can display them on the console:
log-facility=/var/log/dnsmasq.log
log-dhcp
# Custom path for the leases file:
dhcp-leasefile=$TMP/dnsmasq.leases
# Craft a nice PXE menu:
pxe-prompt="Press F8 for boot menu", 3
# The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86,
# Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI
pxe-service=X86PC, "Boot from network", /var/lib/tftpboot/pxelinux
# A boot service type of 0 is special, and will abort the
# net boot procedure and continue booting from local media.
pxe-service=X86PC, "Boot from local hard disk", 0
EOF
if [ -n "$LOCAL_GATEWAY" ]; then
cat <<EOF >> /etc/dnsmasq.conf
# Override the default route supplied by dnsmasq, which assumes the
# router is the same machine as the one running dnsmasq.
#dhcp-option=option:router,${LOCAL_GATEWAY}
dhcp-option=3,${LOCAL_GATEWAY}
EOF
else
cat <<EOF >> /etc/dnsmasq.conf
# Override the default route supplied by dnsmasq and send no default
# route at all.
dhcp-option=3
EOF
fi
if [ "$DHCP" = "yes" ]; then
cat <<EOF >> /etc/dnsmasq.conf
# dnsmasq functions as a normal DHCP server, providing IP leases.
dhcp-range=${MINLEASE_IP},${MAXLEASE_IP},${LOCAL_NETMASK},1h
EOF
else
cat <<EOF >> /etc/dnsmasq.conf
# There is an existing DHCP server on this LAN, so dnsmasq functions
# as a proxy DHCP server providing boot information but no IP leases.
# Any ip in the subnet will do, so you may just put your server NIC ip here.
dhcp-range=${LOCAL_IPADDR},proxy
EOF
fi
# Create the pxelinux configuration file:
cat <<EOF > /var/lib/tftpboot/pxelinux.cfg/default
default huge.s
prompt 1
timeout 1200
display message.txt
F1 message.txt
F2 f2.txt
label huge.s
kernel kernels/huge.s/bzImage
append initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 SLACK_KERNEL=huge.s cf=tftp,${LOCAL_IPADDR},/slackpxe.cfg
label speakup.s
kernel kernels/huge.s/bzImage
append initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 SLACK_KERNEL=huge.s cf=tftp,${LOCAL_IPADDR},/slackpxe.cfg
label memtest
kernel kernels/memtest/memtest
EOF
# Update the slackpxe.cfg file:
sed -i -e "s,^REMOTE_URL=.*,REMOTE_URL=http://$LOCAL_IPADDR," /var/lib/tftpboot/slackpxe.cfg
