#!/bin/sh
# FIXME: UDF fs support?
RDIR=/dev/tty4
NDIR=/dev/null
TMP=/var/log/setup/tmp
if [ ! -d $TMP ]; then
mkdir -p $TMP
fi
T_PX="`cat $TMP/SeTT_PX`"
rm -f $TMP/SeTmount $TMP/SeTDS $TMP/SeTCDdev $TMP/reply
dialog --title "SCANNING FOR CD or DVD DRIVE" --menu \
"Make sure the Slackware disc is in your CD/DVD drive, \
and then press ENTER to begin the scanning process. \
Or, if you'd rather specify the device name manually \
(experts only), choose that option below." \
11 72 2 \
"auto" "Scan for the CD or DVD drive (recommended)" \
"manual" "Manually specify CD or DVD by device name" \
2> $TMP/reply
if [ ! -r $TMP/reply ]; then
# cancel or esc
rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
exit
fi
if [ "`cat $TMP/reply`" = "manual" ]; then
dialog --title "MANUAL CD/DVD DEVICE SELECTION" --menu \
"Please select your CD/DVD device from the list below. \
If you don't see your device listed, choose 'custom'. \
This will let you type in any device name. (and if necessary, \
will create the device)" \
18 70 9 \
"custom" "Type in the CD or DVD device to use" \
"/dev/sr0" "First CD/DVD drive" \
"/dev/sr1" "Second CD/DVD drive" \
"/dev/sr2" "Third CD/DVD drive" \
"/dev/sr3" "Fourth CD/DVD drive" \
"/dev/hdb" "CD/DVD slave on first IDE bus" \
"/dev/hda" "CD/DVD master on first IDE bus (unlikely)" \
"/dev/hdc" "CD/DVD master on second IDE bus" \
"/dev/hdd" "CD/DVD slave on second IDE bus" \
"/dev/hde" "CD/DVD master on third IDE bus" \
"/dev/hdf" "CD/DVD slave on third IDE bus" \
"/dev/hdg" "CD/DVD master on fourth IDE bus" \
"/dev/hdh" "CD/DVD slave on fourth IDE bus" \
"/dev/pcd0" "First parallel port ATAPI CD" \
"/dev/pcd1" "Second parallel port ATAPI CD" \
"/dev/pcd2" "Third parallel port ATAPI CD" \
"/dev/pcd3" "Fourth parallel port ATAPI CD" \
"/dev/aztcd" "Non-IDE Aztech CD/DVD" \
"/dev/cdu535" "Sony CDU-535 CD/DVD" \
"/dev/gscd" "Non-IDE GoldStar CD/DVD" \
"/dev/sonycd" "Sony CDU-31a CD/DVD" \
"/dev/optcd" "Optics Storage CD/DVD" \
"/dev/sjcd" "Sanyo non-IDE CD/DVD" \
"/dev/mcdx0" "Non-IDE Mitsumi drive 1" \
"/dev/mcdx1" "Non-IDE Mitsumi drive 2" \
"/dev/sbpcd" "Old non-IDE SoundBlaster CD/DVD" \
"/dev/cm205cd" "Philips LMS CM-205 CD/DVD" \
"/dev/cm206cd" "Philips LMS CM-206 CD/DVD" \
"/dev/mcd" "Old non-IDE Mitsumi CD/DVD" \
2> $TMP/reply
if [ ! -r $TMP/reply ]; then
# cancel or esc
rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
exit
fi
REPLY="`cat $TMP/reply`"
if [ "$REPLY" = "custom" ]; then
dialog --title "ENTER CD/DVD DEVICE MANUALLY" --inputbox \
"Please enter the name of the CD/DVD device (such as /dev/hdc) that \
you wish to use to mount the Slackware CD/DVD:" \
9 70 2> $TMP/reply
if [ ! -r $TMP/reply ]; then
# cancel or esc
rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
exit
fi
DRIVE_FOUND="`cat $TMP/reply`"
if [ ! -r $DRIVE_FOUND ]; then # no such device
rm -f $TMP/majorminor
dialog --title "MKNOD CD/DVD DEVICE" --inputbox \
"There doesn't seem to be a device by the name of $DRIVE_FOUND in the \
/dev directory, so we will have to create it using the major and minor \
numbers for the device. If you're using a bootdisk with a custom CD/DVD \
driver on it, you should be able to find these numbers in the \
documentation. Also, see the 'devices.txt' file that comes with the \
Linux kernel source. If you don't know the numbers, you'll have to hit \
Esc to abort. Enter the major and minor numbers for the new device, \
separated by one space:" \
15 72 2> $TMP/majorminor
if [ ! -r $TMP/majorminor ]; then
# cancel or esc
rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
exit
fi
MAJOR="`cat $TMP/majorminor`"
dialog --title "MAKING DEVICE IN /dev" --infobox \
"mknod $DRIVE_FOUND b $MAJOR" 3 40
mknod $DRIVE_FOUND b $MAJOR 2> $RDIR
sleep 1
if [ ! -r $DRIVE_FOUND ]; then
dialog --title "MKNOD FAILED" --msgbox \
"Sorry, but the mknod command failed to make the device. You'll need to \
go back and try selecting your source media again. Press ENTER to abort \
the source media selection process." 8 60
rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
exit
fi
fi
else
DRIVE_FOUND=$REPLY
fi
fi
# Search for SCSI/PATA/SATA CD/DVD drives:
if [ "$DRIVE_FOUND" = "" ]; then
dialog --title "SCANNING" --infobox "Scanning for a \
CD/DVD drive containing a Slackware disc..." 4 50
sleep 1
for device in \
/dev/sr0 /dev/sr1 /dev/sr2 /dev/sr3 \
; do
mount -o ro -t iso9660 $device /var/log/mount 1> $RDIR 2> $RDIR
if [ $? = 0 ]; then
DRIVE_FOUND=$device
umount /var/log/mount
break
fi
done
fi
# Search the old IDE interfaces:
if [ "$DRIVE_FOUND" = "" ]; then
dialog --title "SCANNING" --infobox "Scanning for an IDE \
CD/DVD drive containing a Slackware disc..." 4 56
sleep 1
for device in \
/dev/hdd /dev/hdc /dev/hdb /dev/hda \
/dev/hde /dev/hdf /dev/hdg /dev/hdh \
/dev/hdi /dev/hdj /dev/hdk /dev/hdl \
/dev/hdm /dev/hdn /dev/hdo /dev/hdp \
; do
mount -o ro -t iso9660 $device /var/log/mount 1> $RDIR 2> $RDIR
if [ $? = 0 ]; then
DRIVE_FOUND=$device
umount /var/log/mount
break
fi
done
fi
# Search for parallel port ATAPI CD/DVD drives:
if [ "$DRIVE_FOUND" = "" ]; then
dialog --title "SCANNING" --infobox "Scanning for a parallel port \
ATAPI CD/DVD drive containing a Slackware disc..." 4 52
sleep 1
for device in \
/dev/pcd0 /dev/pcd1 /dev/pcd2 /dev/pcd3 \
; do
mount -o ro -t iso9660 $device /var/log/mount 1> $RDIR 2> $RDIR
if [ $? = 0 ]; then
DRIVE_FOUND=$device
umount /var/log/mount
break
fi
done
fi
# Still not found? OK, we will search for CD/DVD drives on old, pre-ATAPI
# proprietary interfaces. There aren't too many of these still around, and
# the scan won't actually work unless a bootdisk that supports the drive is
# used, and any necessary parameters have been passed to the kernel.
if [ "$DRIVE_FOUND" = "" ]; then
dialog --title "SCANNING" --msgbox "No IDE/SCSI drive, so we will try \
scanning for CD drives on \
old proprietary interfaces, such as SoundBlaster pre-IDE CD drives, \
Sony CDU-31a, Sony 535, old Mitsumi pre-IDE, old Optics, etc. For this \
scan to work at all, you'll need to be using a bootdisk that supports \
your CD drive. Please press ENTER to begin this last-chance scan \
for old, obsolete hardware." 11 60
for device in \
/dev/sonycd /dev/gscd /dev/optcd /dev/sjcd /dev/mcdx0 /dev/mcdx1 \
/dev/cdu535 /dev/sbpcd /dev/aztcd /dev/cm205cd /dev/cm206cd \
/dev/bpcd /dev/mcd \
; do
mount -o ro -t iso9660 $device /var/log/mount 1> $RDIR 2> $RDIR
if [ $? = 0 ]; then
DRIVE_FOUND=$device
umount /var/log/mount
break
fi
done
fi
if [ "$DRIVE_FOUND" = "" ]; then
dialog --title "CD/DVD DRIVE NOT FOUND" --msgbox \
"A CD/DVD drive could not be found on any of the devices that were \
scanned. Possible reasons include using a bootdisk or kernel that \
doesn't support your drive, failing to pass parameters needed by some \
drives to the kernel, not having the Slackware disc in your CD/DVD \
drive, or using a drive connected to a Plug and Play soundcard (in this \
case, connecting the drive directly to the IDE interface often helps). \
Please make sure you are using the correct bootdisk for your hardware, \
consult the BOOTING file for possible information on \
forcing the detection of your drive, and then reattempt installation. \
If all else fails, see FAQ.TXT for information about copying \
parts of this CD to your DOS partition and installing it from there.\n\
\n\
You will now be returned to the main menu. If you want to try looking \
for the CD again, you may skip directly to the SOURCE menu selection." \
0 0
rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
exit
fi
while [ 0 ]; do # time to try to mount the CD/DVD device:
mount -o ro -t iso9660 $DRIVE_FOUND /var/log/mount 1> $RDIR 2> $RDIR
if [ $? = 0 ]; then # mounted successfully
dialog --title "CD/DVD DRIVE FOUND" --sleep 1 --infobox \
"A Slackware disc was found in device $DRIVE_FOUND." 3 52
break
else # failed to mount
dialog --title "MOUNT ERROR" --menu "There was an error \
attempting to mount the CD/DVD on $DRIVE_FOUND. \
Maybe the device name is incorrect, the disc is not in the \
drive, or the kernel you are using does not support the \
device. (possibly an incorrect bootdisk) \
What would you like to do now?" \
13 70 3 \
"1" "Abort CD installation" \
"2" "Attempt to mount the CD/DVD device again" \
"3" "Ignore the error and continue" 2> $TMP/errordo
if [ ! $? = 0 ]; then
rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev $TMP/errordo
exit;
fi
DOWHAT="`cat $TMP/errordo`"
rm -f $TMP/errordo
if [ $DOWHAT = 1 ]; then
rm -f $TMP/SeTDS $TMP/SeTmount $TMP/SeTCDdev
exit
elif [ $DOWHAT = 2 ]; then
dialog --title "ATTEMPTING TO MOUNT CD/DVD on $DRIVE_FOUND" \
--infobox "Attempting to mount your CD/DVD again with the \
following command: mount -o ro -t iso9660 $DRIVE_FOUND \
/var/log/mount" 4 69
umount /var/log/mount 1> $NDIR 2> $NDIR
sleep 1
elif [ $DOWHAT = 3 ]; then
# Ignore error, really bad plan but whatever
break
fi
fi
done
# since we should have mounted successfully, let's refresh
# the link for /dev/cdrom on the target partition:
if [ ! -d $T_PX/dev ]; then
mkdir $T_PX/dev
chown root.root $T_PX/dev
chmod 755 $T_PX/dev
fi
( cd $T_PX/dev ; ln -sf $DRIVE_FOUND cdrom )
# Pass information about the source directory to the next install stage:
echo "/var/log/mount/slackware" > $TMP/SeTDS
echo "-source_mounted" > $TMP/SeTmount
echo "$DRIVE_FOUND" > $TMP/SeTCDdev
echo "/dev/null" > $TMP/SeTsource
