#!/bin/sh
# Copyright 2009, 2010, 2011, 2012, 2013 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# originally by: David Cantrell <david@slackware.com>
# maintained by: <volkerdi@slackware.com>
VERSION=5.18.1
BUILD=${BUILD:-1}
# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) export ARCH=i486 ;;
arm*) export ARCH=arm ;;
# Unless $ARCH is already set, use uname -m for all other archs:
*) export ARCH=$( uname -m ) ;;
esac
fi
NUMJOBS=${NUMJOBS:--j6}
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-perl
# Additional required modules:
DBDMYSQL=4.023
DBI=1.628
URI=1.60
XMLPARSER=2.41
XMLSIMPLE=2.20
GETTEXT=1.05
if [ "$ARCH" = "i386" ]; then
SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIRSUFFIX="64"
fi
if [ -x /usr/bin/perl ]; then
echo "Perl detected."
echo
echo "It's a good idea to remove your existing perl first."
echo
sleep 15
fi
# Clear build location:
rm -rf $PKG
mkdir -p $PKG
# Extract the source code:
cd $TMP
rm -rf perl-$VERSION
tar xvf $CWD/perl-$VERSION.tar.?z* || exit 1
# Change into the source directory:
cd perl-$VERSION
# Adjust owner/perms to standard values:
chown -R root:root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
# If after all this time you still don't trust threads, comment
# out the variable below:
#
USE_THREADS="-Dusethreads -Duseithreads"
if [ "$ARCH" = "x86_64" ]; then # adopted from "Cross Linux From Scratch"
# Configure must be told to also use lib64:
zcat $CWD/perl.configure.multilib.patch.gz | patch -p1 --verbose || exit 1
# "perl -V" should report that libc is in /lib64
sed -i -e '/libc/s#/lib/#/lib64/#' hints/linux.sh
# make perl use lib64:
echo 'installstyle="lib64/perl5"' >>hints/linux.sh
fi
# We no longer include suidperl. To quote the INSTALL file:
#
# Because of the buggy history of suidperl, and the difficulty
# of properly security auditing as large and complex piece of
# software as Perl, we cannot recommend using suidperl and the feature
# should be considered deprecated.
# Instead use for example 'sudo': http://www.courtesan.com/sudo/
# Configure perl:
./Configure -de \
-Dprefix=/usr \
-Dsiteprefix=/usr/local \
-Dsitelib="/usr/local/share/perl5" \
-Dsitearch="/usr/local/lib${LIBDIRSUFFIX}/perl5" \
-Darchlib="/usr/lib${LIBDIRSUFFIX}/perl5" \
-Dvendorprefix=/usr \
-Dprivlib="/usr/share/perl5" \
-Dvendorlib="/usr/share/perl5/vendor_perl" \
-Dvendorarch="/usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl" \
-Dscriptdir='/usr/bin' \
-Dcccdlflags='-fPIC' \
-Dinstallprefix=/usr \
-Dlibpth="/usr/local/lib${LIBDIRSUFFIX} /usr/lib${LIBDIRSUFFIX} /lib${LIBDIRSUFFIX}" \
-Doptimize="$SLKCFLAGS" \
$USE_THREADS \
-Duseshrplib \
-Ubincompat5005 \
-Uversiononly \
-Dpager='/usr/bin/less -isr' \
-Darchname=$ARCH-linux
# -Duseshrplib creates libperl.so
# -Ubincompat5005 helps create DSO -> libperl.so
# Kludge for gcc-4.2.4's needlessly changed output:
cat makefile | grep -v '\<command-line\>' > foo
mv foo makefile
cat x2p/makefile | grep -v '\<command-line\>' > foo
mv foo x2p/makefile
# Build perl
make $NUMJOBS || exit 1
make test
# Install perl (needed to build modules):
make install
( cd /usr/bin
ln -sf perl$VERSION perl
ln -sf c2ph pstruct
ln -sf s2p psed
)
#mkdir -p /usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi
# Install perl package:
make install DESTDIR=$PKG
#mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi
# Add additional modules:
( cd ext
( tar xzvf $CWD/DBI-${DBI}.tar.gz
cd DBI-${DBI}
chown -R root:root .
perl Makefile.PL INSTALLDIRS=vendor
make
make test
make install
make install DESTDIR=$PKG
mkdir -p $PKG/usr/doc/perl-$VERSION/DBI-${DBI}
cp -a README $PKG/usr/doc/perl-$VERSION/DBI-${DBI}
chmod 644 $PKG/usr/doc/perl-$VERSION/DBI-${DBI}/README
)
( tar xzvf $CWD/DBD-mysql-${DBDMYSQL}.tar.gz
cd DBD-mysql-${DBDMYSQL}
chown -R root:root .
perl Makefile.PL INSTALLDIRS=vendor
make
make test
make install
make install DESTDIR=$PKG
mkdir -p $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL}
cp -a INSTALL.html README TODO $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL}
chmod 644 $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL}/*
)
( tar xzvf $CWD/XML-Parser-${XMLPARSER}.tar.gz
cd XML-Parser-${XMLPARSER}
chown -R root:root .
perl Makefile.PL INSTALLDIRS=vendor
make
make test
make install
make install DESTDIR=$PKG
mkdir -p $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER}
cp -a README $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER}
chmod 644 $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER}/*
)
( tar xzvf $CWD/XML-Simple-${XMLSIMPLE}.tar.gz
cd XML-Simple-${XMLSIMPLE}
chown -R root:root .
perl Makefile.PL INSTALLDIRS=vendor
make
make test
make install
make install DESTDIR=$PKG
mkdir -p $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE}
cp -a README $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE}
chmod 644 $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE}/*
)
( tar xzvf $CWD/URI-${URI}.tar.gz
cd URI-${URI}
chown -R root:root .
perl Makefile.PL INSTALLDIRS=vendor
make
make test
make install
make install DESTDIR=$PKG
mkdir -p $PKG/usr/doc/perl-$VERSION/URI-${URI}
cp -a README $PKG/usr/doc/perl-$VERSION/URI-${URI}
chmod 644 $PKG/usr/doc/perl-$VERSION/URI-${URI}/*
)
( tar xzvf $CWD/gettext-${GETTEXT}.tar.gz
cd gettext-${GETTEXT}
chown -R root:root .
perl Makefile.PL INSTALLDIRS=vendor
make
make test
make install
make install DESTDIR=$PKG
mkdir -p $PKG/usr/doc/perl-$VERSION/gettext-${GETTEXT}
cp -a README $PKG/usr/doc/perl-$VERSION/gettext-${GETTEXT}
chmod 644 $PKG/usr/doc/perl-$VERSION/gettext-${GETTEXT}/*
)
)
# Strip everything:
( cd $PKG
find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
)
# There are also miniperl and microperl.
# I haven't had any requests for them, but would be willing
# to consider adding one or both to the package if anyone
# actually needs them for some reason.
#make microperl
# Symlinks that replace hard links
( cd $PKG/usr/bin
ln -sf perl$VERSION perl
ln -sf c2ph pstruct
ln -sf s2p psed )
# Install documentation
mkdir -p $PKG/usr/doc/perl-$VERSION
cp -a \
AUTHORS Artistic Changes Copying INSTALL \
README* \
README.{cn,jp,ko,tw} README.linux \
$PKG/usr/doc/perl-$VERSION
# We follow LSB with symlinks in /usr/share:
( cd $PKG/usr/share
mv man .. )
( cd $PKG/usr/man/man1
mkdir foo
cp *.1 foo
rm *.1
mv foo/* .
rmdir foo
gzip -9 *
ln -sf c2ph.1.gz pstruct.1.gz
ln -sf s2p.1.gz psed.1.gz )
( cd $PKG/usr/man/man3
gzip -9 * )
chmod 755 $PKG/usr/bin/*
chmod 644 $PKG/usr/man/man?/*
# This file shouldn't get clobbered:
if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/perl5/perllocal.pod ]; then
mv $PKG/usr/lib${LIBDIRSUFFIX}/perl5/perllocal.pod $PKG/usr/lib${LIBDIRSUFFIX}/perl5/perllocal.pod.new
fi
# Insert the slack-desc:
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
cat << EOF | sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" | sed -e "s#i486#$ARCH#" \
> $PKG/install/doinst.sh
#!/bin/sh
config() {
NEW="\$1"
OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
# If there's no config file by that name, mv it over:
if [ ! -r \$OLD ]; then
mv \$NEW \$OLD
elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
rm \$NEW
fi
# Otherwise, we leave the .new copy for the admin to consider...
}
config usr/lib/perl5/perllocal.pod.new
EOF
# Build the package:
cd $PKG
/sbin/makepkg -l y -c n $TMP/perl-$VERSION-$ARCH-$BUILD.txz
