#!/bin/sh
# Copyright 2008, 2009, 2010, 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Slackware build script for util-linux
VERSION=${VERSION:-$(echo util-linux*.tar.?z* | cut -d - -f 3 | rev | cut -f 3- -d . | rev)}
BUILD=${BUILD:-5}
ADJTIMEXVERS=1.29
SETSERIALVERS=2.17
ZIPTOOLVERS=1.4.0
# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) export ARCH=i486 ;;
arm*) export ARCH=arm ;;
# Unless $ARCH is already set, use uname -m for all other archs:
*) export ARCH=$( uname -m ) ;;
esac
fi
if [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIRSUFFIX="64"
else
SLKCFLAGS="-O2"
LIBDIRSUFFIX=""
fi
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-util-linux
rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP || exit 1
rm -rf util-linux-$VERSION
tar xvf $CWD/util-linux-$VERSION.tar.xz || exit 1
cd util-linux-$VERSION || exit 1
chown -R root.root .
find . \
\( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-exec chmod 755 {} \; -o \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
# Disabled login stuff from being built, as this is provided by shadow
#
# /sbin/elvtune is not built, as configure says it only works with 2.2 and
# 2.4 kernels
# This block is handled near the bottom of the script in symlink creation
# /bin/setterm -- now located in /usr/bin/setterm
# /bin/getopt -- same as setterm
# /usr/bin/readprofile -- now in /usr/sbin
# /usr/bin/tunelp -- same as readprofile
# Changing the fdisk -l output (this was done prior to util-linux-ng) broke
# our installation scripts, so we have changed the name of partition type
# 83 back to "Linux swap":
zcat $CWD/util-linux.fdisk-no-solaris.diff.gz | patch -p1 --verbose || exit 1
# Fix loop encryption:
zcat $CWD/0001-mount-old-fix-encryption-usage.patch.gz | patch -p1 --verbose || exit 1
# Fix fdisk granularity on 512 byte sector size devices:
zcat $CWD/0002-fdisk-don-t-ignore-1MiB-granularity-on-512-byte-sect.patch.gz | patch -p1 --verbose || exit 1
# 20120814 bkw: fix "column --separator <anything>" segfault
zcat $CWD/column-fix_long_opts.diff.gz | patch -p1 --verbose || exit 1
# Regenerate, since patch 0001 hits mount/Makefile.am:
./autogen.sh
CFLAGS="$SLKCFLAGS" \
./configure \
--prefix=/usr \
--libdir=/usr/lib${LIBDIRSUFFIX} \
--sysconfdir=/etc \
--localstatedir=/var \
--mandir=/usr/man \
--infodir=/usr/info \
--docdir=/usr/doc/util-linux-$VERSION \
--disable-static \
--enable-arch \
--enable-agetty \
--enable-kill \
--disable-last \
--enable-line \
--enable-mesg \
--enable-partx \
--enable-raw \
--enable-rename \
--enable-reset \
--disable-login-utils \
--enable-schedutils \
--enable-wall \
--enable-write \
--enable-use-tty-group \
--enable-libblkid \
--enable-libmount \
--enable-libmount-mount \
--enable-libuuid \
--disable-uuidd \
--enable-ddate \
--build=$ARCH-slackware-linux \
|| exit 1
make || exit 1
make install DESTDIR=$PKG || make install DESTDIR=$PKG
# Move the libblkid, libmount, and libuuid libraries to /lib${LIBSUFFIX}
mkdir -p $PKG/lib${LIBDIRSUFFIX}
( cd $PKG/usr/lib${LIBDIRSUFFIX}
mv libblkid.so.1* $PKG/lib${LIBDIRSUFFIX}
mv libmount.so.1* $PKG/lib${LIBDIRSUFFIX}
mv libuuid.so.1* $PKG/lib${LIBDIRSUFFIX}
rm -f libblkid.so libmount.so libuuid.so
ln -sf ../../lib${LIBDIRSUFFIX}/libblkid.so.1 libblkid.so
ln -sf ../../lib${LIBDIRSUFFIX}/libmount.so.1 libmount.so
ln -sf ../../lib${LIBDIRSUFFIX}/libuuid.so.1 libuuid.so
)
# Moving things around that have been in the same place
# for 15 years is, IMHO, not a wise idea AT ALL.
# If this had to be moved, some place out of /usr might
# have shown a grain of insight...
if [ -r $PKG/usr/sbin/fdformat ]; then
mkdir -p $PKG/usr/bin
mv $PKG/usr/sbin/fdformat $PKG/usr/bin/fdformat
# Now since stuff will start looking in this new place,
# we have no choice but to link these:
( cd $PKG/usr/sbin
ln -sf ../bin/fdformat .
)
fi
# Build ziptool
cd $TMP || exit 1
rm -rf ziptool-$ZIPTOOLVERS
tar xvf $CWD/ziptool-$ZIPTOOLVERS.tar.xz || exit 1
cd ziptool-$ZIPTOOLVERS || exit 1
zcat $CWD/ziptool-fix_build.patch.gz | patch -p1 || exit 1
mkdir scsi
cat $CWD/scsi_ioctl.h > scsi/scsi_ioctl.h
chown -R root:root .
make || exit 1
strip ziptool
cat ziptool > $PKG/sbin/ziptool
chmod 0755 $PKG/sbin/ziptool
mkdir -p $PKG/usr/doc/ziptool-$ZIPTOOLVERS
cp -a README $PKG/usr/doc/ziptool-$ZIPTOOLVERS
chmod 644 $PKG/usr/doc/ziptool-$ZIPTOOLVERS/*
cat ziptool.1.gz > $PKG/usr/man/man1/ziptool.1.gz
# Build bsdstrings
cd $TMP || exit 1
rm -rf bsdstrings
tar xvf $CWD/bsdstrings.tar.gz || exit 1
cd bsdstrings || exit 1
make || exit 1
strip strings
cat strings > $PKG/usr/bin/strings
chmod 0755 $PKG/usr/bin/strings
cat strings.1 | gzip -9c > $PKG/usr/man/man1/strings.1.gz
# Add just the hostname utilities from net-tools, so that anyone
# installing just the A series will not have a hostname (null):
cd $TMP || exit 1
rm -rf net-tools-1.60.20120726git
tar xvf $CWD/net-tools-1.60.20120726git.tar.xz
cd net-tools-1.60.20120726git
zcat $CWD/net-tools.config.h.gz > config.h
make
make hostname
strip hostname
cat hostname > $PKG/bin/hostname
chmod 755 $PKG/bin/hostname
chown root:root $PKG/bin/hostname
( cd $PKG/bin
ln -sf hostname dnsdomainname
ln -sf hostname nisdomainname
ln -sf hostname ypdomainname
ln -sf hostname domainname
)
cd man/en_US
for page in hostname.1 dnsdomainname.1 nisdomainname.1 ypdomainname.1 \
domainname.1 ; do
cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz
done
# Build adjtimex
cd $TMP || exit 1
rm -rf adjtimex-$ADJTIMEXVERS
tar xvf $CWD/adjtimex_${ADJTIMEXVERS}.orig.tar.gz || exit 1
cd adjtimex-$ADJTIMEXVERS || exit 1
chown -R root:root .
zcat $CWD/adjtimex_1.29-2.2.diff.gz | patch -p1 || exit 1
CFLAGS=-O2 ./configure --prefix=/usr || exit 1
make || exit 1
strip adjtimex
cat adjtimex > $PKG/sbin/adjtimex
chmod 0755 $PKG/sbin/adjtimex
cat adjtimex.8 | gzip -9c > $PKG/usr/man/man8/adjtimex.8.gz
mkdir -p $PKG/usr/doc/adjtimex-$ADJTIMEXVERS
cp -a COPYING COPYRIGHT README README.ru adjtimex.lsm \
$PKG/usr/doc/adjtimex-$ADJTIMEXVERS
# Build setserial
cd $TMP || exit 1
rm -rf setserial-$SETSERIALVERS
tar xvf $CWD/setserial-$SETSERIALVERS.tar.gz || exit 1
cd setserial-$SETSERIALVERS || exit 1
chown -R root:root .
zcat $CWD/setserial-rc.serial.diff.gz | patch -E -p1 --verbose || exit 1
zcat $CWD/setserial-undef_TIOCGHAYESESP.diff.gz | patch -E -p1 --verbose || exit 1
# The original config.{guess,sub} do not work on x86_64
cp -p /usr/share/libtool/config/config.{guess,sub} .
./configure --prefix=/usr || exit 1
make || exit 1
strip setserial
cat setserial > $PKG/sbin/setserial
chmod 0755 $PKG/sbin/setserial
mkdir -p $PKG/etc/rc.d
cat rc.serial > $PKG/etc/rc.d/rc.serial.new
cat serial.conf > $PKG/etc/serial.conf.new
cat setserial.8 | gzip -9c > $PKG/usr/man/man8/setserial.8.gz
# These have always traditionally been available before /usr
# might be mounted:
( cd $PKG/usr/bin
mv getopt setterm $PKG/bin
cd $PKG/usr/bin
ln -s ../../bin/getopt .
ln -s ../../bin/setterm .
)
cd $TMP/util-linux-$VERSION # Go back home :)
# Now let's add some important symlinks :)
( cd $PKG/sbin
ln -s ../bin/mount .
ln -s ../bin/umount .
ln -s ziptool jaztool
ln -s hwclock clock
cd $PKG/usr/sbin
ln -s ../../sbin/cfdisk .
ln -s ../../sbin/ctrlaltdel .
ln -s ../../sbin/sfdisk .
cd $PKG/usr/bin
ln -s ../sbin/readprofile .
ln -s ../sbin/tunelp .
ln -s ../../bin/more .
ln -s ../../sbin/raw .
cd $PKG/usr/man/man1
ln -s ziptool.1 jaztool.1
cd $PKG/usr/man/man8
ln -s hwclock.8 clock.8
)
find $PKG | xargs file | grep -e "executable" -e "shared object" \
| grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
# Compress and if needed symlink the man pages:
if [ -d $PKG/usr/man ]; then
( cd $PKG/usr/man
for manpagedir in $(find . -type d -name "man*") ; do
( cd $manpagedir
for eachpage in $( find . -type l -maxdepth 1) ; do
ln -s $( readlink $eachpage ).gz $eachpage.gz
rm $eachpage
done
gzip -9 *.?
)
done
)
fi
# Compress info page and remove dir file
rm $PKG/usr/info/dir
gzip -9 $PKG/usr/info/*
mkdir -p $PKG/usr/doc/util-linux-$VERSION
cp -a AUTHORS COPYING DEPRECATED NEWS README* TODO \
docs/v${VERSION}-ReleaseNotes \
$PKG/usr/doc/util-linux-$VERSION
mkdir $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
cd $PKG
/sbin/makepkg -l y -c n $TMP/util-linux-$VERSION-$ARCH-$BUILD.txz
