#!/bin/sh
#
# /etc/rc.d/rc.S: System initialization script.
#
# Mostly written by: Patrick J. Volkerding, <volkerdi@slackware.com>
#
PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
# Try to mount /proc:
/sbin/mount -v proc /proc -n -t proc 2> /dev/null
# Mount sysfs next, if the kernel supports it:
if [ -d /sys ]; then
if grep -wq sysfs /proc/filesystems ; then
if ! grep -wq sysfs /proc/mounts ; then
/sbin/mount -v sysfs /sys -n -t sysfs
fi
fi
fi
# If /run exists, mount a tmpfs on it (unless the
# initrd has already done so):
if [ -d /run ]; then
if ! grep -wq "tmpfs /run tmpfs" /proc/mounts ; then
/sbin/mount -v -n -t tmpfs tmpfs /run -o mode=0755,size=32M,nodev,nosuid,noexec
fi
fi
# Load the loop device kernel module:
if [ -x /etc/rc.d/rc.loop ]; then
/etc/rc.d/rc.loop start
fi
# Initialize udev to manage /dev entries and hotplugging.
# You may turn off udev by making the /etc/rc.d/rc.udev file non-executable
# or giving the "nohotplug" option at boot, but realize that if you turn off
# udev that you will have to load all the kernel modules that you need
# yourself (possibly in /etc/rc.d/rc.modules.local), and make any additional
# device nodes that you need in the /dev directory. Even USB and IEEE1394
# devices will need to have the modules loaded by hand if udev is not used.
# So use it. :-)
if grep -wq sysfs /proc/mounts && grep -q devtmpfs /proc/filesystems ; then
if ! grep -wq nohotplug /proc/cmdline ; then
if [ -x /etc/rc.d/rc.udev ]; then
/etc/rc.d/rc.udev start
fi
fi
fi
# Mount Control Groups filesystem interface:
if grep -wq cgroup /proc/filesystems ; then
if [ -d /sys/fs/cgroup ]; then
# See linux-*/Documentation/cgroups/cgroups.txt (section 1.6)
# Check if we have some tools to autodetect the available cgroup controllers
if [ -x /bin/cut -a -x /bin/tail ]; then
# Mount a tmpfs as the cgroup filesystem root
mount -t tmpfs -o mode=0755,size=8M cgroup_root /sys/fs/cgroup
# Autodetect available controllers and mount them in subfolders
controllers="$(/bin/cut -f 1 /proc/cgroups | /bin/tail -n +2)"
for i in $controllers; do
mkdir /sys/fs/cgroup/$i
mount -t cgroup -o $i $i /sys/fs/cgroup/$i
done
unset i controllers
else
# We can't use autodetection so fall back mounting them all together
mount -t cgroup cgroup /sys/fs/cgroup
fi
else
mkdir -p /dev/cgroup
mount -t cgroup cgroup /dev/cgroup
fi
fi
# Start the haveged entropy daemon:
if [ -x /etc/rc.d/rc.haveged ]; then
/etc/rc.d/rc.haveged start
fi
# Initialize the Logical Volume Manager.
# This won't start unless we find /etc/lvmtab (LVM1) or
# /etc/lvm/backup/ (LVM2). This is created by /sbin/vgscan, so to
# use LVM you must run /sbin/vgscan yourself the first time (and
# create some VGs and LVs).
# Create LVM lock/run directories:
mkdir -p -m 0700 /run/lvm /run/lock /run/lock/lvm
if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
echo "Initializing LVM (Logical Volume Manager):"
# Check for device-mapper support.
if ! grep -wq device-mapper /proc/devices ; then
# Try to load a device-mapper kernel module:
/sbin/modprobe -q dm-mod
fi
# Scan for new volume groups:
/sbin/vgscan --mknodes --ignorelockingfailure 2> /dev/null
if [ $? = 0 ]; then
# Make volume groups available to the kernel.
# This should also make logical volumes available.
/sbin/vgchange -ay --ignorelockingfailure
fi
fi
# Open any volumes created by cryptsetup.
#
# Some notes on /etc/crypttab in Slackware:
# Only LUKS formatted volumes are supported (except for swap)
# crypttab follows the following format:
# <luks_name> <device> <password> <options>
#
# <luks_name>: This is the name of your LUKS volume.
# For example: crypt-home
#
# <device>: This is the device containing your LUKS volume.
# For example: /dev/sda2
#
# <password>: This is either the volume password in plain text, or the name of
# a key file. Use 'none' to interactively enter password on boot.
#
# <options>: Comma-separated list of options. Note that there must be a
# password field for any options to be picked up (use a password of 'none' to
# get a password prompt at boot). The following options are supported:
#
# discard -- this will cause --allow-discards to be passed to the cryptsetup
# program while opening the LUKS volume.
#
# ro -- this will cause --readonly to be passed to the cryptsetup program while
# opening the LUKS volume.
#
# swap -- this option cannot be used with other options. The device given will
# be formatted as a new encrypted volume with a random key on boot, and used as
# swap.
#
if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then
# First, check for device-mapper support.
if ! grep -wq device-mapper /proc/devices ; then
# If device-mapper exists as a module, try to load it.
# Try to load a device-mapper kernel module:
/sbin/modprobe -q dm-mod
fi
# NOTE: we only support LUKS formatted volumes (except for swap)!
cat /etc/crypttab | grep -v "^#" | grep -v "^$" | while read line; do
eval LUKSARRAY=( $line )
LUKS="${LUKSARRAY[0]}"
DEV="${LUKSARRAY[1]}"
PASS="${LUKSARRAY[2]}"
OPTS="${LUKSARRAY[3]}"
LUKSOPTS=""
if echo $OPTS | grep -wq ro ; then LUKSOPTS="${LUKSOPTS} --readonly" ; fi
if echo $OPTS | grep -wq discard ; then LUKSOPTS="${LUKSOPTS} --allow-discards" ; fi
# Skip LUKS volumes that were already unlocked (in the initrd):
/sbin/cryptsetup status $LUKS 2>/dev/null | head -n 1 | grep -q "is active" && continue
if /sbin/cryptsetup isLuks $DEV 2>/dev/null ; then
if [ -z "${LUKSOPTS}" ]; then
echo "Unlocking LUKS encrypted volume '${LUKS}' on device '$DEV':"
else
echo "Unlocking LUKS encrypted volume '${LUKS}' on device '$DEV' with options '${LUKSOPTS}':"
fi
if [ -n "${PASS}" -a "${PASS}" != "none" ]; then
if [ -f "${PASS}" ]; then
# A password was given a key-file filename
/sbin/cryptsetup ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS
else
# A password was provided in plain text
echo "${PASS}" | /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS
fi
else
# No password was given, or a password of 'none' was given
/sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1
fi
elif echo $OPTS | grep -wq swap ; then
# If any of the volumes is to be used as encrypted swap,
# then encrypt it using a random key and run mkswap:
echo "Creating encrypted swap volume '${LUKS}' on device '$DEV':"
/sbin/cryptsetup --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV
mkswap /dev/mapper/$LUKS
fi
done
fi
# Enable swapping:
/sbin/swapon -a 2> /dev/null
# Start FUSE, if requested:
if [ -x /etc/rc.d/rc.fuse ]; then
/etc/rc.d/rc.fuse start
fi
# Set the tick and frequency for the system clock.
# Default values are: TICK=10000 and FREQ=0
TICK=10000
FREQ=0
# If there's a /etc/default/adjtimex config file, source it to override
# the default TICK and FREQ:
if [ -r /etc/default/adjtimex ]; then
. /etc/default/adjtimex
fi
if /sbin/adjtimex --tick $TICK --frequency $FREQ; then
echo "Setting the system clock rate: /sbin/adjtimex --tick $TICK --frequency $FREQ"
else
echo "Failed to set system clock with adjtimex, possibly invalid parameters? (TICK=$TICK FREQ=$FREQ)"
fi
# Set the system time from the hardware clock using hwclock --hctosys.
if [ -x /sbin/hwclock ]; then
# Check for a broken motherboard RTC clock (where ioports for rtc are
# unknown) to prevent hwclock causing a hang:
if ! grep -q " : rtc" /proc/ioports ; then
CLOCK_OPT="--directisa"
fi
if [ /etc/adjtime -nt /etc/hardwareclock ]; then
if grep -q "^LOCAL" /etc/adjtime ; then
echo -n "Setting system time from the hardware clock (localtime): "
else
echo -n "Setting system time from the hardware clock (UTC): "
fi
/sbin/hwclock $CLOCK_OPT --hctosys
elif grep -wq "^localtime" /etc/hardwareclock 2> /dev/null ; then
echo -n "Setting system time from the hardware clock (localtime): "
/sbin/hwclock $CLOCK_OPT --localtime --hctosys
else
echo -n "Setting system time from the hardware clock (UTC): "
/sbin/hwclock $CLOCK_OPT --utc --hctosys
fi
date
fi
# Test to see if the root partition is read-only, like it ought to be.
READWRITE=no
if touch /fsrwtestfile 2>/dev/null; then
rm -f /fsrwtestfile
READWRITE=yes
else
echo "Testing root filesystem status: read-only filesystem"
fi
# See if a forced filesystem check was requested at shutdown:
if [ -r /etc/forcefsck ]; then
FORCEFSCK="-f"
fi
# Check the root filesystem:
if [ ! $READWRITE = yes ]; then
RETVAL=0
if [ ! -r /etc/fastboot ]; then
echo "Checking root filesystem:"
/sbin/fsck $FORCEFSCK -C -a /
RETVAL=$?
fi
# An error code of 2 or higher will require a reboot.
if [ $RETVAL -ge 2 ]; then
# An error code equal to or greater than 4 means that some errors
# could not be corrected. This requires manual attention, so we
# offer a chance to try to fix the problem in single-user mode:
if [ $RETVAL -ge 4 ]; then
echo
echo "***********************************************************"
echo "*** An error occurred during the root filesystem check. ***"
echo "*** You will now be given a chance to log into the ***"
echo "*** system in single-user mode to fix the problem. ***"
echo "*** ***"
echo "*** If you are using the ext2 filesystem, running ***"
echo "*** 'e2fsck -v -y <partition>' might help. ***"
echo "***********************************************************"
echo
echo "Once you exit the single-user shell, the system will reboot."
echo
PS1="(Repair filesystem) \#"; export PS1
sulogin
else # With an error code of 2 or 3, reboot the machine automatically:
echo
echo "***********************************"
echo "*** The filesystem was changed. ***"
echo "*** The system will now reboot. ***"
echo "***********************************"
echo
fi
echo "Unmounting file systems."
/sbin/umount -a -r
/sbin/mount -n -o remount,ro /
echo "Rebooting system."
sleep 2
reboot -f
fi
# Remount the root filesystem in read-write mode
echo "Remounting root device with read-write enabled."
/sbin/mount -w -v -n -o remount /
if [ $? -gt 0 ] ; then
echo "FATAL: Attempt to remount root device as read-write failed! This is going to"
echo "cause serious problems."
fi
else
echo "Testing root filesystem status: read-write filesystem"
echo
echo "ERROR: Root partition has already been mounted read-write. Cannot check!"
echo
echo "For filesystem checking to work properly, your system must initially mount"
echo "the root partition as read only. If you're booting with LILO, add a line:"
echo
echo " read-only"
echo
echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
fi # Done checking root filesystem
# Any /etc/mtab that exists here is old, so we start with a new one:
/bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab
# Add entry for / to /etc/mtab:
/sbin/mount -f -w /
# Add /proc, /sys, and /dev/shm mounts to /etc/mtab:
if [ -d /proc/sys ]; then
/sbin/mount -f -t proc proc /proc
fi
if [ -d /sys/bus ]; then
/sbin/mount -f -t sysfs sysfs /sys
fi
if grep -q '^[^ ]\+ /dev/shm ' /proc/mounts 2> /dev/null ; then
/sbin/mount -f -t tmpfs tmpfs /dev/shm
fi
# Configure ISA Plug-and-Play devices:
if [ -r /etc/isapnp.conf ]; then
if [ -x /sbin/isapnp ]; then
/sbin/isapnp /etc/isapnp.conf
fi
fi
# Run the kernel module script. This updates the module dependencies and
# also supports manually loading kernel modules through rc.modules.local.
if [ -x /etc/rc.d/rc.modules ]; then
/etc/rc.d/rc.modules
fi
# Configure kernel parameters:
if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
echo "Configuring kernel parameters: /sbin/sysctl -e --system"
/sbin/sysctl -e --system
elif [ -x /sbin/sysctl ]; then
echo "Configuring kernel parameters: /sbin/sysctl -e --system"
# Don't say "Applying /etc/sysctl.conf" or complain if the file doesn't exist
/sbin/sysctl -e --system 2> /dev/null | grep -v "Applying /etc/sysctl.conf"
fi
# Check all the non-root filesystems:
if [ ! -r /etc/fastboot ]; then
echo "Checking non-root filesystems:"
/sbin/fsck $FORCEFSCK -C -R -A -a
fi
# Mount usbfs only if it is found in /etc/fstab:
if grep -wq usbfs /proc/filesystems; then
if ! grep -wq usbfs /proc/mounts ; then
if grep -wq usbfs /etc/fstab; then
/sbin/mount -v /proc/bus/usb
fi
fi
fi
# Mount non-root file systems in fstab, but not NFS or SMB
# because TCP/IP is not yet configured, and not proc or sysfs
# because those have already been mounted. Also check that
# devpts is not already mounted before attempting to mount
# it. With a 2.6.x or newer kernel udev mounts devpts.
# We also need to wait a little bit to let USB and other
# hotplugged devices settle (sorry to slow down the boot):
echo "Mounting non-root local filesystems:"
sleep 3
if /bin/grep -wq devpts /proc/mounts ; then
# This pipe after the mount command is just to convert the new
# mount verbose output back to the old format that contained
# more useful information:
/sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs,nodevpts | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep " ${dev} " ; done
else
/sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep " ${dev} " ; done
fi
# Enable swapping again. This is needed in case a swapfile is used,
# as it can't be enabled until the filesystem it resides on has been
# mounted read-write.
/sbin/swapon -a 2> /dev/null
# Start cgmanager (or cgproxy in a container):
if [ -x /etc/rc.d/rc.cgmanager -a -d /sys/fs/cgroup ]; then
/etc/rc.d/rc.cgmanager start
fi
# Clean up some temporary files:
rm -f /var/run/* /var/run/*/* /var/run/*/*/* /etc/nologin \
/etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot \
/var/state/saslauthd/saslauthd.pid \
/tmp/.Xauth* 1> /dev/null 2> /dev/null
( cd /var/log/setup/tmp && rm -rf * )
( cd /tmp && rm -rf kde-[a-zA-Z]* ksocket-[a-zA-Z]* hsperfdata_[a-zA-Z]* plugtmp* )
# Clear /var/lock/subsys:
if [ -d /var/lock/subsys ]; then
rm -f /var/lock/subsys/*
fi
# Create /tmp/{.ICE-unix,.X11-unix} if they are not present:
if [ ! -e /tmp/.ICE-unix ]; then
mkdir -p /tmp/.ICE-unix
chmod 1777 /tmp/.ICE-unix
fi
if [ ! -e /tmp/.X11-unix ]; then
mkdir -p /tmp/.X11-unix
chmod 1777 /tmp/.X11-unix
fi
# Create a fresh utmp file:
touch /var/run/utmp
chown root:utmp /var/run/utmp
chmod 664 /var/run/utmp
# Update the current kernel level in the /etc/motd (Message Of The Day) file,
# if the first line of that file begins with the word 'Linux'.
# You are free to modify the rest of the file as you see fit.
if [ -x /bin/sed ]; then
/bin/sed -i "{1s/^Linux.*/$(/bin/uname -sr)\./}" /etc/motd
fi
# If there are SystemV init scripts for this runlevel, run them.
if [ -x /etc/rc.d/rc.sysvinit ]; then
/etc/rc.d/rc.sysvinit
fi
# Run serial port setup script:
# CAREFUL! This can make some systems hang if the rc.serial script isn't
# set up correctly. If this happens, you may have to edit the file from a
# boot disk, and/or set it as non-executable:
if [ -x /etc/rc.d/rc.serial ]; then
/etc/rc.d/rc.serial start
fi
# Carry an entropy pool between reboots to improve randomness.
if [ -f /etc/random-seed ]; then
echo "Using /etc/random-seed to initialize /dev/urandom."
cat /etc/random-seed > /dev/urandom
fi
# Use the pool size from /proc, or 4096 bits:
if [ -r /proc/sys/kernel/random/poolsize ]; then
dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(expr $(cat /proc/sys/kernel/random/poolsize) / 8) 2> /dev/null
else
dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
fi
chmod 600 /etc/random-seed
