Initial revision

3 files changed, 304 insertions, 0 deletions

diff --git a/zrythm/build/slack-desc b/zrythm/build/slack-desc
new file mode 100644
index 00000000..0812c52d
--- /dev/null
+++ b/zrythm/build/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+zrythm: zrythm (highly automated and intuitive digital audio workstation)
+zrythm:
+zrythm: Zrythm is a cross-platform digital audio workstation designed to be
+zrythm: featureful and easy to use.
+zrythm: Suppports automating almost anything using events using straight lines,
+zrythm: ramps and curves, or with LFOs and envelopes. Complete support for LV2
+zrythm: and VST2, with experimental support for VST3, AU, SFZ and SF2.
+zrythm:
+zrythm:
+zrythm: zrythm home: https://www.zrythm.org/
+zrythm:
diff --git a/zrythm/build/slack-required b/zrythm/build/slack-required
new file mode 100644
index 00000000..e311860e
--- /dev/null
+++ b/zrythm/build/slack-required
@@ -0,0 +1,9 @@
+jack2
+ladspa_sdk
+libcyaml
+lilv
+lv2
+rtaudio
+rtmidi
+suil
+portaudio
diff --git a/zrythm/build/zrythm.SlackBuild b/zrythm/build/zrythm.SlackBuild
new file mode 100755
index 00000000..0427f3e0
--- /dev/null
+++ b/zrythm/build/zrythm.SlackBuild
@@ -0,0 +1,276 @@
+#!/bin/sh
+# $Id$
+# Copyright 2020  Eric Hameleers, Eindhoven, NL
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+#
+# Slackware SlackBuild script 
+# ===========================
+# By:          Eric Hameleers <alien@slackware.com>
+# For:         zrythm
+# Descr:       highly automated and intuitive digital audio workstation
+# URL:         https://www.zrythm.org/
+# Build needs: 
+# Needs:       jack2, ladspa_sdk, libcyaml, lilv, lv2, rtaudio, rtmidi, suil
+# Changelog:   
+# 1.0.0_alpha.6.0.1-1:
+#              15/dec/2020 by Eric Hameleers <alien@slackware.com>
+#              * Initial build.
+# 
+# Run 'sh zrythm.SlackBuild' to build a Slackware package.
+# The package (.t?z) and .txt file as well as build logs are created in /tmp .
+# Install the package using 'installpkg' or 'upgradepkg --install-new'.
+#
+# -----------------------------------------------------------------------------
+
+PRGNAM=zrythm
+VERSION=${VERSION:-"1.0.0_alpha.6.0.1"}
+SRCVER=$(echo $VERSION |tr _ -)
+BUILD=${BUILD:-1}
+NUMJOBS=${NUMJOBS:-" -j$(nproc) "}
+TAG=${TAG:-alien}
+
+# Sub-projects:
+LIBAUDEC=0.2.4
+REPROC=14.2.1
+
+DOCS="AUTHORS CONTRIBUTING.md CHANGELOG.md README.md THANKS TRANSLATORS"
+
+# Where do we look for sources?
+SRCDIR=$(cd $(dirname $0); pwd)
+
+# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
+TMP=${TMP:-/tmp/build}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+mkdir -p $SRCDIR/sources
+
+SOURCE[0]="$SRCDIR/sources/${PRGNAM}-${SRCVER}.tar.xz"
+SRCURL[0]="https://www.zrythm.org/releases/${PRGNAM}-${SRCVER}.tar.xz"
+
+SOURCE[1]="$SRCDIR/sources/libaudec-${LIBAUDEC}.tar.gz"
+SRCURL[1]="https://github.com/zrythm/libaudec/archive/v${LIBAUDEC}.tar.gz"
+
+SOURCE[2]="$SRCDIR/sources/reproc-${REPROC}.tar.gz"
+SRCURL[2]="https://github.com/DaanDeMeyer/reproc/archive/v${REPROC}.tar.gz"
+
+##
+## --- with a little luck, you won't have to edit below this point --- ##
+##
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+case "$ARCH" in
+  i?86)      SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  x86_64)    SLKCFLAGS="-O2 -fPIC"
+             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
+             ;;
+  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  *)         SLKCFLAGS=${SLKCFLAGS:-"-O2"}
+             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
+             ;;
+esac
+
+case "$ARCH" in
+    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)       TARGET=$ARCH-slackware-linux ;;
+esac
+
+# Exit the script on errors:
+set -e
+trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
+# Catch unitialized variables:
+set -u
+P1=${1:-1}
+
+# Save old umask and set to 0022:
+_UMASK_=$(umask)
+umask 0022
+
+# Create working directories:
+mkdir -p $OUTPUT          # place for the package to be saved
+mkdir -p $TMP/tmp-$PRGNAM # location to build the source
+mkdir -p $PKG             # place for the package to be built
+rm -rf $PKG/*             # always erase old package's contents
+rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
+rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log
+                          # remove old log files
+
+# Source file availability:
+for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do
+  if ! [ -f ${SOURCE[$i]} ]; then
+    echo "Source '$(basename ${SOURCE[$i]})' not available yet..."
+    # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
+    [ -w "$SRCDIR" ] || SOURCE[$i]="$OUTPUT/$(basename ${SOURCE[$i]})"
+    if [ -f ${SOURCE[$i]} ]; then echo "Ah, found it!"; continue; fi
+    if ! [ "x${SRCURL[$i]}" == "x" ]; then
+      echo "Will download file to $(dirname $SOURCE[$i])"
+      wget --no-check-certificate -nv -T 20 -O "${SOURCE[$i]}" "${SRCURL[$i]}" || true
+      if [ $? -ne 0 -o ! -s "${SOURCE[$i]}" ]; then
+        echo "Fail to download '$(basename ${SOURCE[$i]})'. Aborting the build."
+        mv -f "${SOURCE[$i]}" "${SOURCE[$i]}".FAIL
+        exit 1
+      fi
+    else
+      echo "File '$(basename ${SOURCE[$i]})' not available. Aborting the build."
+      exit 1
+    fi
+  fi
+done
+
+if [ "$P1" == "--download" ]; then
+  echo "Download complete."
+  exit 0
+fi
+
+# --- PACKAGE BUILDING ---
+
+echo "++"
+echo "|| $PRGNAM-$VERSION"
+echo "++"
+
+cd $TMP/tmp-$PRGNAM
+echo "Extracting the source archive(s) for $PRGNAM..."
+for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do
+  tar -xvf ${SOURCE[$i]}
+done
+cd ${PRGNAM}-${SRCVER}
+# Fix man page location:
+sed -i meson.build -e "s|mandir = .*$|mandir = prefix / get_option ('mandir')|"
+
+# Copy subprojects in place for which we do not have separate packages:
+mv -i ../libaudec-${LIBAUDEC} subprojects/libaudec
+rm -f subprojects/libaudec.wrap
+mv -i ../reproc-${REPROC} subprojects/reproc
+rm -f subprojects/reproc.wrap
+
+chown -R root:root .
+chmod -R u+w,go+r-w,a+rX-st .
+
+echo Building ...
+export LDFLAGS="$SLKLDFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+export CFLAGS="$SLKCFLAGS"
+mkdir meson-build
+cd meson-build
+  meson setup \
+    --prefix=/usr \
+    --mandir=/usr/man/man1 \
+    --libdir=lib${LIBDIRSUFFIX} \
+    --buildtype=release \
+    -Dmanpage=true \
+    -Drtaudio=enabled \
+    -Drtmidi=enabled \
+    -Dsdl=enabled \
+    .. \
+    2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
+    # Requires python-sphinx-intl plus more deps:
+    #-Duser_manual=true \
+    # Do not use yet!
+    #-Dportaudio=enabled \
+  ninja $NUMJOBS \
+    2>&1 | tee $OUTPUT/make-${PRGNAM}.log
+  DESTDIR=$PKG ninja install \
+    2>&1 | tee $OUTPUT/install-${PRGNAM}.log
+cd ..
+
+# Add 'X-DAW' category to the desktop file (for liveslak):
+for DESKTOPF in $PKG/usr/share/applications/*.desktop ; do
+  if ! grep -q X-DAW $DESKTOPF ; then
+    sed -i $DESKTOPF \
+      -e "s/^Categories=\(.*\)/Categories=X-DAW;\1/"
+  fi
+done
+
+# Add this to the doinst.sh:
+mkdir -p $PKG/install
+cat <<EOINS >> $PKG/install/doinst.sh
+# Update the desktop database:
+if [ -x usr/bin/update-desktop-database ]; then
+  chroot . /usr/bin/update-desktop-database usr/share/applications > /dev/null 2>&1
+fi
+
+# Update hicolor theme cache:
+if [ -d usr/share/icons/hicolor ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    chroot . /usr/bin/gtk-update-icon-cache -f -t usr/share/icons/hicolor 1> /dev/null 2> /dev/null
+  fi
+fi
+
+# Update the mime database:
+if [ -x usr/bin/update-mime-database ]; then
+  chroot . /usr/bin/update-mime-database usr/share/mime >/dev/null 2>&1
+fi
+
+# Compile gsettings schemas:
+if [ -x usr/bin/glib-compile-schemas ]; then
+  chroot . /usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas/  >/dev/null 2>&1
+fi
+EOINS
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
+cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
+find $PKG/usr/doc -type f -exec chmod 644 {} \;
+
+# Compress the man page(s):
+if [ -d $PKG/usr/man ]; then
+  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
+  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+fi
+
+# Strip binaries (if any):
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $SRCDIR/slack-desc > $PKG/install/slack-desc
+cat $SRCDIR/slack-required > $PKG/install/slack-required
+
+# Build the package:
+cd $PKG
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+cd $OUTPUT
+md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5
+cd -
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
+cat $PKG/install/slack-required > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.dep
+
+# Restore the original umask:
+umask ${_UMASK_}
+