From ab2da43a3e77afc50d735c322ddde7f0bbf9d3e5 Mon Sep 17 00:00:00 2001 From: dsomero Date: Wed, 19 May 2010 22:04:09 -0400 Subject: system/atarisio: Removed (build failure) This appears to be related to kernel version... --- system/atarisio/999-atarisio.rules.in | 1 - system/atarisio/README | 32 ----- system/atarisio/README.Slackware | 58 --------- system/atarisio/atarisio.SlackBuild | 88 ------------- system/atarisio/atarisio.info | 10 -- system/atarisio/doinst.sh | 13 -- system/atarisio/man/adir.1 | 55 -------- system/atarisio/man/ataricom.1 | 41 ------ system/atarisio/man/atariserver.1 | 230 ---------------------------------- system/atarisio/man/atarixfer.1 | 52 -------- system/atarisio/man/casinfo.1 | 24 ---- system/atarisio/man/dir2atr.1 | 150 ---------------------- system/atarisio/slack-desc | 19 --- 13 files changed, 773 deletions(-) delete mode 100644 system/atarisio/999-atarisio.rules.in delete mode 100644 system/atarisio/README delete mode 100644 system/atarisio/README.Slackware delete mode 100644 system/atarisio/atarisio.SlackBuild delete mode 100644 system/atarisio/atarisio.info delete mode 100644 system/atarisio/doinst.sh delete mode 100644 system/atarisio/man/adir.1 delete mode 100644 system/atarisio/man/ataricom.1 delete mode 100644 system/atarisio/man/atariserver.1 delete mode 100644 system/atarisio/man/atarixfer.1 delete mode 100644 system/atarisio/man/casinfo.1 delete mode 100644 system/atarisio/man/dir2atr.1 delete mode 100644 system/atarisio/slack-desc diff --git a/system/atarisio/999-atarisio.rules.in b/system/atarisio/999-atarisio.rules.in deleted file mode 100644 index fe39ef930e..0000000000 --- a/system/atarisio/999-atarisio.rules.in +++ /dev/null @@ -1 +0,0 @@ -KERNEL=="atarisio*", MODE="0660", GROUP="@GROUP@" diff --git a/system/atarisio/README b/system/atarisio/README deleted file mode 100644 index 61deb9faed..0000000000 --- a/system/atarisio/README +++ /dev/null @@ -1,32 +0,0 @@ -atarisio (disk emulator for use with Atari 8-bit computer and SIO2PC) - -AtariSIO allows a Linux system to act as one or more disk drives, -a printer, and/or a cassette drive for an Atari 8-bit (400/800/XL/XE) -computer, using an SIO2PC cable. - -Even without SIO2PC or a real Atari, this package includes some utilities -that are useful for manipulating and examining Atari disk, tape, and -executable images. - -A real 16550A UART (or close derivative) is required. In particular, -atarisio does NOT work with USB to RS232 adaptors. - -======================================================================== -= READ README.Slackware about the SETUID and GROUP variables = -= before building the package! = -======================================================================== - -Before you can run atariserver or atarixfer, you will need the atarisio -kernel module loaded. If you're dedicating a serial port for use with -atariserver, you can add the following line to /etc/rc.d/rc.modules or -rc.local (as you prefer): - -/sbin/modprobe atarisio port=/dev/ttyS0 - -(Replace ttyS0 if you're using a different serial port, of course) - -If you need to use your serial port for other purposes, it's a little -less cut-and-dried. You will have to either manually modprobe and rmmod -the module as needed, or write yourself a script to do the job (possibly -also starting up agetty when the module is unloaded, or SLIP mode if -you're using FujiChat on your Atari, etc etc). diff --git a/system/atarisio/README.Slackware b/system/atarisio/README.Slackware deleted file mode 100644 index aabe7090a4..0000000000 --- a/system/atarisio/README.Slackware +++ /dev/null @@ -1,58 +0,0 @@ -Before you can run atariserver or atarixfer, you will need the atarisio -kernel module loaded. If you're dedicating a serial port for use with -atariserver, you can add the following line to /etc/rc.d/rc.modules or -rc.local (as you prefer): - -/sbin/modprobe atarisio port=/dev/ttyS0 - -(Replace ttyS0 if you're using a different serial port, of course) - -If you need to use your serial port for other purposes, it's a little -less cut-and-dried. You will have to either manually modprobe and rmmod -the module as needed, or write yourself a script to do the job (possibly -also starting up agetty when the module is unloaded, or SLIP mode if -you're using FujiChat on your Atari, etc etc). - -#### READ THIS! #### - -By default, atariserver and atarixfer are installed setuid root, -group owner "users". This is done for two reasons: (a) so the programs -can access the /dev/atarisio* devices, and (b) so they can set POSIX -realtime scheduling mode, which prevents timing issues that can cause -SIO frames to be retransmitted or (on a loaded system) dropped. - -If run setuid root, atariserver and atarixfer will drop their root -privileges after setting realtime mode and opening the device. -There are no currently known exploits against atarisio, but the code -hasn't exactly been audited by the NSA either. - -You have several options here: - -1. The default. Simply run the script. On a single-user system, this is -reasonable, though it's the least secure. atariserver and atarixfer will -be setuid root, and runnable by anyone in the users group. - -2. Run atariserver and atarixfer setuid root, but restrict access to -some group other than "users". To do this, run the script as: - -# SETUID=yes GROUP=wheel ./atarisio.SlackBuild - -(replace "wheel" with any other group, as you prefer). -This option is more secure than option 1 and outperforms option 3. - -3. Run atariserver and atarixfer as a normal user. This can cause -performance problems, but on most setups it works OK (on some systems, -it may not work at all). To do this, run the script as: - -# SETUID=no ./atarisio.SlackBuild - -This should be more secure than 1 or 2. - -4. Same as 3, but extra paranoid: use a group other than "users" (I like -"wheel", but you could create your own "atarisio" group if you really -want), and be very picky about who you add to the group. - -# SETUID=no GROUP=wheel ./atarisio.SlackBuild - -Like option 3, this may cause performance problems or prevent the app -from working at all. diff --git a/system/atarisio/atarisio.SlackBuild b/system/atarisio/atarisio.SlackBuild deleted file mode 100644 index 63e3d11b75..0000000000 --- a/system/atarisio/atarisio.SlackBuild +++ /dev/null @@ -1,88 +0,0 @@ -#!/bin/sh - -# Slackware build script for atarisio - -# Written by B. Watson (yalhcru@gmail.com) - -PRGNAM=atarisio -VERSION=20100113 -ARCH=${ARCH:-i486} -BUILD=${BUILD:-1} -TAG=${TAG:-_SBo} - -CWD=$(pwd) -TMP=${TMP:-/tmp/SBo} -PKG=$TMP/package-$PRGNAM -OUTPUT=${OUTPUT:-/tmp} - -KERNEL=${KERNEL:-$(uname -r)} -KERNELPATH=${KERNELPATH:-/lib/modules/$KERNEL/build} -PKG_VERS=${VERSION}_$(echo $KERNEL | tr - _) - -SRCVER=$( echo $VERSION | sed 's/^..//' ) - -SETUID=${SETUID:-yes} -GROUP=${GROUP:-users} - -# No need for LIBDIRSUFFIX here, no /usr/lib dir in package. -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" -fi - -set -e - -rm -rf $PKG -mkdir -p $TMP $PKG $OUTPUT -cd $TMP -rm -rf $PRGNAM-$SRCVER -tar xvf $CWD/$PRGNAM-$SRCVER.tar.gz -cd $PRGNAM-$SRCVER -chown -R root:root . -chmod -R a-s,u+w,go+r-w . - -sed -i "s/^\\(C.*FLAGS *= *\\)-g/\1$SLKCFLAGS/" Makefile - -make -mkdir -p $PKG/usr/{include,bin} $PKG/lib/modules/$KERNEL/misc -make install INST_DIR=$PKG/usr MDIR=$PKG/lib/modules/$KERNEL/misc - -# Hias forgot to add a couple of useful tools to his "make install" rule: -cp tools/casinfo $PKG/usr/bin - -strip $PKG/usr/bin/* -chown -R root:root $PKG/usr/bin - -if [ "$SETUID" = "yes" ]; then - chown root:$GROUP $PKG/usr/bin/{atariserver,atarixfer} - chmod 4710 $PKG/usr/bin/{atariserver,atarixfer} -else - chmod 0755 $PKG/usr/bin/{atariserver,atarixfer} -fi - - -mkdir -p $PKG/lib/udev/rules.d -sed 's/@GROUP@/'$GROUP'/g' \ - < $CWD/999-$PRGNAM.rules.in \ - > $PKG/lib/udev/rules.d/999-$PRGNAM.rules - -mkdir -p $PKG/usr/man/man1 -cd $CWD/man - for i in *.1; do - gzip -9c $i > $PKG/usr/man/man1/$i.gz - done -cd - - -mkdir -p $PKG/usr/doc/$PRGNAM-$PKG_VERS -cp $CWD/README.Slackware README LICENSE Changelog $PKG/usr/doc/$PRGNAM-$PKG_VERS -cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$PKG_VERS/$PRGNAM.SlackBuild - -mkdir -p $PKG/install -cat $CWD/doinst.sh > $PKG/install/doinst.sh -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$PKG_VERS-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/system/atarisio/atarisio.info b/system/atarisio/atarisio.info deleted file mode 100644 index 0d4412aca4..0000000000 --- a/system/atarisio/atarisio.info +++ /dev/null @@ -1,10 +0,0 @@ -PRGNAM="atarisio" -VERSION="20100113" -HOMEPAGE="http://www.horus.com/~hias/atari/" -DOWNLOAD="http://www.horus.com/~hias/atari/atarisio/atarisio-100113.tar.gz" -MD5SUM="9c57517620ddac22f9e750678a0e72ee" -DOWNLOAD_x86_64="" -MD5SUM_x86_64="" -MAINTAINER="B. Watson" -EMAIL="yalhcru@gmail.com" -APPROVED="dsomero" diff --git a/system/atarisio/doinst.sh b/system/atarisio/doinst.sh deleted file mode 100644 index d3b55d1299..0000000000 --- a/system/atarisio/doinst.sh +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh - -if [ -x sbin/depmod ]; then - chroot . /sbin/depmod -a -fi - -# Ensure that udevd knows what's up with the atarisio device(s)... -# If you're on Slack 12.1 or older, the --reload-rules needs to be -# replaced with --reload_rules below. - -if [ -x sbin/udevadm ]; then - sbin/udevadm control --reload-rules 2>/dev/null -fi diff --git a/system/atarisio/man/adir.1 b/system/atarisio/man/adir.1 deleted file mode 100644 index 9dbb2286d9..0000000000 --- a/system/atarisio/man/adir.1 +++ /dev/null @@ -1,55 +0,0 @@ -.TH ADIR "1" "April 2007" "adir (atarisio 0.30)" "HiassofT Atari 8-bit Tools" -.SH NAME -adir \- print the directory of an Atari DOS floppy disk image - -.SH SYNOPSIS -.B adir -[\fB\-\fR\fI\fR] [\fB\-r\fR] [\fB\-t\fR] \fIimage-filename\fR [\fI...\fR] - -.SH DESCRIPTION -adir prints the directory of one or more DOS 2.x or MyDOS floppy images -(ATR, XFD, or DCM (DiskComm) format). Output resembles the output of the Atari DOS -\fBA\fR command. Single, enhanced 1050, double, and high-capacity -(hard disk) images are supported. - -.SH OPTIONS -.TP -\fB\-\fR\fI\fR -Number of columns for output format. Default is \fB\-4\fR. This option is -ignored if \fB\-r\fR is given. -.TP -\fB\-r\fR -Raw format: list the contents of all directory entries that have been used, -including those containing deleted files. Output consists of 6 columns: -.sp 1 -.PD 0 -.RS -.IP "File number" -.IP "Status flags (in hex)" -.IP "File name (8 characters)" -.IP "File extension (3 characters)" -.IP "Starting sector" -.IP "File size in sectors" -.RE -.PD 1 -. -.TP -\fB-t\fR -Recursively print directory tree of image. Only useful for MyDOS-formatted -disk images. -.TP -\fIimage-filename\fR [\fI...\fR] -One or more Atari DOS or MyDOS-compatible disk image files -(ATR, XFD, or DCM format). SpartaDOS-formatted images are \fBnot\fR supported. - -.SH -AUTHOR -Matthias Reichl <\fBhias@horus.com\fR> -.PP -Man page by B. Watson <\fBurchlay@urchlay.com\fB> - -.SH -SEE ALSO -\&\fIatariserver\fR\|(1), \&\fIatarixfer\fR\|(1), \&\fIdir2atr\fR\|(1). -.PP -AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR diff --git a/system/atarisio/man/ataricom.1 b/system/atarisio/man/ataricom.1 deleted file mode 100644 index 45a4a98604..0000000000 --- a/system/atarisio/man/ataricom.1 +++ /dev/null @@ -1,41 +0,0 @@ -.TH ATARICOM "1" "April 2009" "ataricom (atarisio 0.30)" "HiassofT Atari 8-bit Tools" -.SH NAME -ataricom \- utility for manipulating Atari 8\-bit executable files -.SH SYNOPSIS -ataricom [\fIoptions\fR]... file [outfile] -.SH DESCRIPTION -ataricom performs various useful operations on Atari 8\-bit executable -files. These files are also known as binary load files, or COM, BIN, XEX, OBJ, OBX, et al. These -are only names; there is only one Atari 8\-bit executable file format. -.SH OPTIONS -.TP -\fB\-c\fR address -create COM file from raw data file -.TP -\fB\-r\fR address -add RUN block with specified address at end of file -.TP -\fB\-i\fR address -add INIT block with specified address at end of file -.TP -\fB\-b\fR start[\-end] -only process specified blocks -.TP -\fB\-x\fR start[\-end] -exclude specified blocks -.TP -\fB\-m\fR start\-end -merge specified blocks -.HP -\fB\-s\fR block,adr... split block at given addresses -.TP -\fB\-n\fR -write raw data blocks (no COM headers) -.SH AUTHOR -Matthias Reichl <\fBhias@horus.com\fR> -.PP -Man page by B. Watson <\fBurchlay@urchlay.com\fB> -.SH SEE ALSO -\&\fIatariserver\fR\|(1), \&\fIdir2atr\fR\|(1), \&\fIadir\fR\|(1). -.PP -AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR diff --git a/system/atarisio/man/atariserver.1 b/system/atarisio/man/atariserver.1 deleted file mode 100644 index 6226bb55c7..0000000000 --- a/system/atarisio/man/atariserver.1 +++ /dev/null @@ -1,230 +0,0 @@ -.TH ATARISERVER "1" "April 2007" "atariserver (atarisio 0.30)" "HiassofT Atari 8-bit Tools" -.SH -NAME -\fBatariserver\fR \- SIO server (peripheral emulator) for Atari 8\-bit computers, for use with an SIO2PC cable - -.SH -SYNOPSIS -.B atariserver -[\fB\-h\fR] -[\fB\-f\fR \fIdevice\fR] -[\fB\-c\fR] -[\fB\-C\fR] -[\fB\-m\fR] -[\fB\-o\fR \fIfile\fR] -[\fB\-p\fR] -[\fB\-s\fR] -[\fB\-S\fR] -[\fB\-X\fR] -[\fB\-t\fR] -[\fB\-<1-8>\fR] -[\fB\-V\fR \fIdensity\fR \fIdir\fR] -[\fB\-P\fR \fIconv\fR \fIpath\fR] -[\fBfilename\fR] -[\fI...\fR] - -.SH -DESCRIPTION -\fBatariserver\fR emulates Atari 8\-bit peripherals using the \fBSIO\fR -protocol, including disk drives, printers, and cassette tape decks. - -This manual page only documents the command\-line options to -\fBatariserver\fR. For more information, including a description of -the user interface and the command set -for remote command support, see the \fBREADME\fR -file for AtariSIO, possibly located in /usr/doc/atarisio or -/usr/share/doc/atarisio. - -.SH -OPTIONS -Most options can be set from within \fBatariserver\fR's curses\-based -user interface while the program is running. -.TP -\fB\-h\fR -Displays command line help message -.TP -\fB-f\fR \fIdevice\fR -Sets the AtariSIO device. This option is only needed if you -configured the kernel driver to support more than one interface. -.IP -\fINote:\fR this must be the very first command line option, otherwise -it will be ignored! -.IP -Without this option, \fBatariserver\fR will check if the environment -variable \fBATARISERVER_DEVICE\fR is set. If not, the default device -\fB/dev/atarisio0\fR will be used. - -.TP -\fB\-c\fR -Tells AtariSIO that your Atari is connected via an alternative -SIO2PC cable. The standard SIO2PC cable uses the RI pin for -command line input. Some Windows SIO emulators use a slightly -modified SIO2PC cable, using DSR instead of RI. If you are not -sure what kind of SIO2PC cable you have, just try starting -atariserver with and without the \fB\-c\fR switch and test if your -Atari can boot from atariserver. -.IP -\fINote:\fR there's no performance benefit using the DSR line instead -of the RI line; both cables work identically with AtariSIO. - -.TP -\fB\-C\fR -Similar to \fB\-c\fR except that the CTS pin is used. This is -quite useful for testing purposes: connect two PCs with a -nullmodem\-cable, start \fBatariserver\fR with \fB\-C\fR on one machine -and \fBatarixfer\fR with \fB\-p\fR on the other. - -.TP -\fB\-m\fR -Monochrome mode: disable colors, even if your terminal -reports color support. - -.TP -\fB\-o\fR \fIfile\fR -Set trace file: all output displayed in the log window will -also be saved to the specified file. - -.TP -\fB\-p\fR -Loads the next image with "write protect" enabled. This -option is only valid for the next image; if you want to load -multiple write protected images, you have to specify this -options before each filename. - -.TP -\fB\-s\fR -Disables high speed (57600 bit/sec) SIO support. It sets -the baudrate to fixed 19200 bit/sec and also disables several -special commands like "get ultraspeed byte" or "flush disk" -that are only supported by high-speed drives like the -1050 speedy. Read the list of SIO commands at the end of the -README for more details. - -.TP -\fB\-S\fR -High speed (57600 bit/sec) mode with pauses between bytes. -This is needed for some high speed SIO routines which are too -slow to handle sustained 57600 bit/sec transfers. The effective -speed will be approx. 48000 bit/sec. - -.TP -\fB\-X\fR -Enable XF551 compatibility mode. In XF551 mode \fBatariserver\fR -reacts to commands with the 7th bit set and automatically -switches to 38400 bit/sec transfer mode. Additionally, the -GetStatus command sets both bit 7 and 6 in case of an QD -(double sided, double density, 1440 sectors) disk, just like -the XF551. - -.TP -\fB\-t\fR -Increases the trace level. You may use this option up to -three times if you want more output. - -.TP -\fB\-1\fR \fIthrough\fR \fB\-8\fR -Set the drive number for the next image file. The default is 1 for the -first image, and is incremented for each subsequent image. See \fBNOTES\fR -below for an example. - -.TP -\fB\-V\fR \fIdensity\fR \fIdir\fR -Create virtual device of given density, using files from directory \fIdir\fR. -\fIdensity\fR is one of: -.IP -\fBs\fR (single density, 720 sectors), -.IP -\fBd\fR (double density, 720 sectors), -.IP -\fBe\fR (1050 "enhanced" density, 1040 sectors), -.IP -\fInumber\fR\fBs\fR (single density, \fInumber\fR sectors, e.g. \fB1440s\fR), -.IP -\fInumber\fR\fBd\fR (double density, \fInumber\fR sectors, e.g. \fB1440d\fR), -.IP -\fBS\fR (single density, the number of sectors needed to store all files is automatically calculated) -.IP -\fBD\fR (double density, like \fBS\fR) -.TP -\fB\-P\fR \fIconv\fR \fIpath\fR -Install printer handler. -.IP -\fIconv\fR is EOL conversion: \fBr\fR=raw(no conversion), \fBl\fR=LF (UN*X), \fBc\fR=CR+LF (DOS/Windows) -.IP -\fIpath\fR is either a filename or \fI|print-command\fR, eg \fB|lpr\fR -.IP -\fINote:\fR Most shells require you to quote \fIpath\fR if it contains a pipe (|) character. To use the standard unix print service, use: \fB-P l "|lpr"\fR - -.TP -\fIfilename\fR -One or more image files, which should be either ATR or XFD format Atari -8\-bit disk images. Image filenames may be interleaved with \fB\-[1\-8]\fR -and/or \fB-p\fR options. Images may be in any Atari\-compatible DOS or -boot disk format; \fBatariserver\fR simply serves them to the Atari, -without interpreting the contents. - -.SH -NOTES -To load several images you could start atariserver with -the following options (for example): - -.br -atariserver dos.atr -3 -p data1.atr -V d filedir -.br - -This will load dos.atr into D1:, data1.atr into D3: and create -a virtual drive in double density (720 sectors) out of the -directory filedir. Furthermore, D1: and D4: will be writable, -whereas D3: will be write protected. - -If you set the environment variable ATRPATH, \fBatariserver\fR will look -for image files in the specified (colon separated) directories -if the image can't be found in the current working directory. -ATRPATH works both on the command line and in the user interface. -For example: - -export ATRPATH=/home/atari/dos:/data/xl/magazines - -or (for csh users): -setenv ATRPATH /home/atari/dos:/data/xl/magazines - -.SH -KERNEL SUPPORT - -\fBatariserver\fR requires the \fBatarisio\fR kernel module (driver) to -be loaded. If you receive an "error opening /dev/atarisio0" message, -try loading the module (as \fBroot\fR): - -.br -/sbin/modprobe atarisio port=/dev/ttyS0 -.PP -Replace ttyS0 with whichever serial port has the SIO2PC cable attached. -If the module refuses to load, you may have to "modprobe 8250" first. - -.SH -SUPPORTED HARDWARE - -\fBatariserver\fR works with most common one-chip RS232 (serial port) -SIO2PC designs, including the AtariMax "smart" SIO2PC by Steven Tucker, -and designs based on the 1489/14C89 and Max232/233 chips. -.PP -The USB SIO2PC (sometimes incorrectly called SIO2USB) from AtariMax is -\fBNOT\fR supported, though support is planned for future versions -of AtariSIO/atariserver. -.PP -The old two-chip SIO2PC interface (with a MAX232 and an LS368) -is NOT supported, and probably never will be. -.PP -All Atari 8\-bit computers (400/800, XL, and XE series) are supported. - -.SH -AUTHOR -Matthias Reichl <\fBhias@horus.com\fR> -.PP -Man page by B. Watson <\fBurchlay@urchlay.com\fB> - -.SH -SEE ALSO -\&\fIatarixfer\fR\|(1), \&\fIdir2atr\fR\|(1), \&\fIadir\fR\|(1). -.PP -AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR diff --git a/system/atarisio/man/atarixfer.1 b/system/atarisio/man/atarixfer.1 deleted file mode 100644 index 61e13bd4da..0000000000 --- a/system/atarisio/man/atarixfer.1 +++ /dev/null @@ -1,52 +0,0 @@ -.TH ATARIXFER "1" "April 2007" "atarixfer (atarisio 0.30)" "HiassofT Atari 8-bit Tools" -.SH NAME -\fBatarixfer\fR \- read or write from an Atari disk drive, via 1050-2-PC or APE ProSystem cable - -.SH SYNOPSIS -.B atarixfer -[\fB\-f\fR \fIdevice\fR] [\fB\-p\fR] [\fB\-r\fR \fIimagefile\fR] [\fB\-w\fR \fIimagefile\fR] [\fB\-d\fR] [\fB\-\fR<\fIdrive\fR>] - -.SH DESCRIPTION -\fBatarixfer\fR can either write a disk image file to a real Atari disk drive, -or read a disk from an Atari drive and write its contents to an image file. -A 1050-2-PC or APE ProSystem cable is required. -.PP -\fBatarixfer\fR only supports whole-disk transfers, to or from a -disk image file. Reading/writing single files or individual sectors -is not possible. - -.SH OPTIONS -.TP -\fB-f\fR \fIdevice\fR -Use alternative AtariSIO device (default: \fI/dev/atarisio0\fR) -.TP -\fB-p\fR -Use APE ProSystem cable (default: 1050-2-PC cable) -.TP -\fB-r\fR \fIimagefile\fR -Read from Atari disk and create an image of its contents. The type of -image to create is decided by looking at the filename, which should end -in \fI.atr\fR, \fI.xfd\fR, or \fI.dcm\fR (case-insensitive). If the -filename doesn't match any of these, ATR image format is assumed. -.TP -\fB-r\fR \fIimagefile\fR -Write a disk image to the drive. -.TP -\fB-d\fR -Enable debugging output. -.TP -[\fB\-\fR<\fIdrive\fR>] -Use drive number (1..8). Default is \fB-1\fR. The drive number must -match the drive number switches on the Atari drive. - -.SH -AUTHOR -Matthias Reichl <\fBhias@horus.com\fR> -.PP -Man page by B. Watson <\fBurchlay@urchlay.com\fB> - -.SH -SEE ALSO -\&\fIatariserver\fR\|(1), \&\fIdir2atr\fR\|(1), \&\fIadir\fR\|(1). -.PP -AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR diff --git a/system/atarisio/man/casinfo.1 b/system/atarisio/man/casinfo.1 deleted file mode 100644 index 73ec5de856..0000000000 --- a/system/atarisio/man/casinfo.1 +++ /dev/null @@ -1,24 +0,0 @@ -.TH CASINFO "1" "April 2009" "casinfo (atarisio 0.30)" "HiassofT Atari 8-bit Tools" -.SH NAME -casinfo \- Get information on an Atari 8\-bit cassette image file -.SH SYNOPSIS -casinfo file [file] ... -.SH DESCRIPTION -For each valid cassette image (CAS file) on the command line, casinfo -will display the description (if any), the number of parts (aka load -stages), the number of blocks, and the block header information for -each block in the file. -.PP -casinfo takes no options. -.PP -For a complete specification of the CAS file format, see the documentation -for \fBcas2wav\fR, \fBwav2cas\fR, and/or \fBcassio\fR, all available -at a web browser near you... -.SH AUTHOR -Matthias Reichl <\fBhias@horus.com\fR> -.PP -Man page by B. Watson <\fBurchlay@urchlay.com\fB> -.SH SEE ALSO -\&\fIatariserver\fR\|(1), \&\fIdir2atr\fR\|(1), \&\fIadir\fR\|(1). -.PP -AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR diff --git a/system/atarisio/man/dir2atr.1 b/system/atarisio/man/dir2atr.1 deleted file mode 100644 index b4e352cedc..0000000000 --- a/system/atarisio/man/dir2atr.1 +++ /dev/null @@ -1,150 +0,0 @@ -.TH DIR2ATR "1" "April 2007" "dir2atr (atarisio 0.30)" "HiassofT Atari 8-bit Tools" -.SH NAME -dir2atr \- create an Atari disk image from a directory of files - -.SH SYNOPSIS -.B dir2atr -[\fB\-d\fR] [\fB\-m\fR] [\fB\-p\fR] [\fB\-b\fR \fIDOS\fR] [\fBsectors\fR] \fIimage\-filename\fR \fIdirectory\fR - -.SH DESCRIPTION -\fBdir2atr\fR creates an Atari DOS 2.x or MyDOS compatible disk image, -containing the files from \fIdirectory\fR (or a blank disk, if the -supplied \fIdirectory\fR does not exist). Despite the name, dir2atr is -capable of creating ATR, XFD, or DCM format images. - -.SH OPTIONS -.TP -\fB\-d\fR -Create double\-density (256 bytes/sector) disk image. Without this option, -the default is to create a single\-density (128 bytes/sector) image. -.TP -\fB\-m\fR -Use MyDOS format (VTOC; see \fB\-b\fR for boot sector type). Without this -option, \fBdir2atr\fR may still create a MyDOS format image: If the -number of sectors is not supplied, or if using double density (\fB\-d\fR), -or if the number of sectors supplied in single density mode is anything -other than 720 or 1040, then MyDOS format will be used. -.sp -.RS -Another way of saying this is that DOS 2.x format will only be used if the -number of sectors is supplied, and if it is equal to either 720 (DOS 2.0 -format) or 1040 (DOS 2.5 enhanced density format). -.sp -SpartaDOS\-formatted images are \fBnot\fR supported. -.RE -.TP -\fB\-p\fR -Create \fBPICONAME.TXT\fR file in disk image, containing long filename -information (will be used by MyPicoDOS when displaying filenames). -.TP -\fB\-b\fR \fIDOS\fR -Create bootable disk for specified DOS. The directory must already -contain the \fBDOS.SYS\fR or equivalent for the specified DOS, unless -creating a MyPicoDOS image (in which case, \fBPICODOS.SYS\fR will be -created and added to the image). -.sp -Supported DOS choices (case\-insensitive): -.br -Dos20, Dos25, MyDos453, TurboDos21, TurboDos21HS, MyPicoDos403, MyPicoDos403HS -.TP -\fBsectors\fR -Number of sectors in the created image. Standard floppy\-sized images -generally contain 720 sectors (single\- or double\-density, 90K or 180K -capacity) or 1040 sectors (1050/DOS 2.5 enhanced density, 127K capacity). -.sp -Some Atari drives and DOSes support larger floppy disks (e.g. 1440 -double\-density sectors for a DS/DD XF551 disk, 360K capacity; or -2880 DD sectors for a PC-style 720K floppy drive). -.sp -Hard disk images may contain up to 65535 double\-density sectors. This -limitation is imposed by the ATR file format (16 megabytes is pretty -big for an 8-bit Atari disk, though). Most Atari DOSes won't support -physical disk partitions bigger than this, anyway. Theoretically, -the XFD "format" could be of unlimited size (since it's just a raw -dump of the sectors, with no structure), but \fBdir2atr\fR imposes -the same size limit for XFD as for ATR. -.sp -Actually, the distinction between "hard disk" and "floppy disk" images -doesn't really exist in the ATR file format: any image that fits on -an actual floppy disk (one that's actually supported by an actual -Atari DOS) is by definition a floppy image, and anything -larger than that must be considered a hard disk image. -.sp -If \fBsectors\fR is omitted, \fBdir2atr\fR will create a MyDOS\-format -image with as many sectors as needed to contain the all the files -in \fIdirectory\fR, unless this is less than 720 sectors (in which -case, a 720\-sector image is created, with some free sectors). -.sp -If \fBsectors\fR is given, it must be between 720 and 65535. No -Atari\-compatible disk may contain fewer than 720 sectors. When -creating a DCM (DiskComm) image, the only supported image sizes -are 90K (720 single\-density sectors), 127K (1040 single\-density -sectors, aka 1050 enhanced density), and 180K (720 double\-density -sectors). -.sp -If you specify a number of sectors too small for the files in -\fIdirectory\fR, you will get an error message, but the image will -still be created. It will contain whatever files were copied before -running out of space (which might be none, if the first file is too -big to fit). -.TP -\fIimage\-filename\fR -Disk image file to create. The image type is determined by the -filename "extension", which should be \fI.atr\fR, \fI.xfd\fR, or \fI.dcm\fR. -The extension is treated case\-insensitively, and the default image type -is ATR if the extension is missing or not recognized. -.TP -\fIdirectory\fR -Directory of files to be copied to the image. The files are copied in -case-sensitive alphabetical order. \fIdirectory\fR may contain -subdirectories, which will be skipped if creating a DOS 2.x image, or -included (recursively) as MyDOS subdirectories if creating a MyDOS image. -While the image is being created, each filename in \fIdirectory\fR is -printed to standard error output after it's copied. -.sp -\fBNOTE:\fR Empty subdirectories will \fBnot\fR be copied to the image. -.sp -Atari DOS and MyDOS (and any other compatible DOS for the Atari) suffer -from a limit of 64 files per directory. For Atari DOS, this means 64 -files per disk, since subdirectories are not supported. For MyDOS, -it means 64 files/subdirectories per directory. In either case, -\fBdir2atr\fR will copy the first 64 files in the directory or -subdirectory, then issue a warning to let you know that it had to -skip the rest of the files. -.sp -To create a blank disk, you may create and use an empty directory. A -blank disk is also created if the specified \fIdirectory\fR is not -a directory (e.g. if it's a regular file), or if it does not exist -at all! No error messages are given for non\-directories or non\-existent -files. This is probably not the author's original intent, but it can -be considered useful behaviour (except when it's confusing: if you make -a typo in the \fIdirectory\fR, you'll end up with a blank image instead -of the expected error message. The careful user will notice that no -"Added file" messages get printed in this case). -.sp -Although Atari DOS and MyDOS only support uppercase "8.3" names, -filenames within \fIdirectory\fR are not required to conform to this -limitation. \fBdir2atr\fR will transform the filenames so that they -match the Atari limitations, although care should be taken to avoid -filenames within \fIdirectory\fR that differ only in case (e.g. -\fBFOO\fR and \fBfoo\fR). If this happens, some of the resulting Atari -filenames will contain spaces, which is incompatible with most -(all?) Atari DOSes. Also, \fBdir2atr\fR will allow filenames inside -the image to start with a digit, which is incompatible with most Atari -DOSes as well. -.sp -If the \fB\-p\fR option is used, the filenames will still be transformed -as necessary, but the original filenames will be recorded in the -\fBPICONAME.TXT\fR file. If creating a MyPicoDOS image, the MyPicoDOS -menu will actually display the full, original filenames. -.SH -AUTHOR -Matthias Reichl <\fBhias@horus.com\fR> -.PP -Man page by B. Watson <\fBurchlay@urchlay.com\fB> - -.SH -SEE ALSO -\&\fIatariserver\fR\|(1), \&\fIatarixfer\fR\|(1), \&\fIadir\fR\|(1). -.PP -AtariSIO home page: \fBhttp://www.horus.com/~hias/atari/\fR diff --git a/system/atarisio/slack-desc b/system/atarisio/slack-desc deleted file mode 100644 index c7077bd711..0000000000 --- a/system/atarisio/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -atarisio: atarisio (disk emulator for use with Atari 8-bit computer and SIO2PC) -atarisio: -atarisio: AtariSIO allows a Linux system to act as one or more disk drives, -atarisio: a printer, and/or a cassette drive for an Atari 8-bit (400/800/XL/XE) -atarisio: computer, using an SIO2PC cable. -atarisio: -atarisio: Even without SIO2PC or a real Atari, this package includes some -atarisio: utilities that are useful for manipulating and examining Atari disk, -atarisio: tape, and executable images. -atarisio: -atarisio: -- cgit v1.2.3-80-g2a13