diff options
Diffstat (limited to 'network/hping3/patches/personality.diff')
| -rw-r--r-- | network/hping3/patches/personality.diff | 301 |
1 files changed, 301 insertions, 0 deletions
diff --git a/network/hping3/patches/personality.diff b/network/hping3/patches/personality.diff new file mode 100644 index 0000000000..59c0bd7120 --- /dev/null +++ b/network/hping3/patches/personality.diff @@ -0,0 +1,301 @@ +Say hping3, not hping2. + +--- hping3-3.a2.ds1.orig/docs/hping3.8 ++++ hping3-3.a2.ds1/docs/hping3.8 +@@ -1,8 +1,8 @@ +-.TH HPING2 8 "2001 Aug 14" ++.TH HPING3 8 "2001 Aug 14" + .SH NAME +-hping2 \- send (almost) arbitrary TCP/IP packets to network hosts ++hping3 \- send (almost) arbitrary TCP/IP packets to network hosts + .SH SYNOPSIS +-.B hping2 ++.B hping3 + [ + .B \-hvnqVDzZ012WrfxykQbFSRPAUXYjJBuTG + ] [ +@@ -116,11 +116,11 @@ + .br + .ad + .SH DESCRIPTION +-hping2 is a network tool able to send custom TCP/IP packets and to +-display target replies like ping program does with ICMP replies. hping2 ++hping3 is a network tool able to send custom TCP/IP packets and to ++display target replies like ping program does with ICMP replies. hping3 + handle fragmentation, arbitrary packets body and size and can be used in + order to transfer files encapsulated under supported protocols. Using +-hping2 you are able to perform at least the following stuff: ++hping3 you are able to perform at least the following stuff: + + - Test firewall rules + - Advanced port scanning +@@ -136,7 +136,7 @@ + - A lot of others. + + .IR "It's also a good didactic tool to learn TCP/IP" . +-hping2 is developed and maintained by antirez@invece.org and is ++hping3 is developed and maintained by antirez@invece.org and is + licensed under GPL version 2. Development is open so you can send + me patches, suggestion and affronts without inhibitions. + .SH HPING SITE +@@ -158,7 +158,7 @@ + .I -c --count count + Stop after sending (and receiving) + .I count +-response packets. After last packet was send hping2 wait COUNTREACHED_TIMEOUT ++response packets. After last packet was send hping3 wait COUNTREACHED_TIMEOUT + seconds target host replies. You are able to tune COUNTREACHED_TIMEOUT editing + hping2.h + .TP +@@ -171,10 +171,10 @@ + .I wait + to X micro seconds. + The default is to wait +-one second between each packet. Using hping2 to transfer files tune this ++one second between each packet. Using hping3 to transfer files tune this + option is really important in order to increase transfer rate. Even using +-hping2 to perform idle/spoofing scanning you should tune this option, see +-.B HPING2-HOWTO ++hping3 to perform idle/spoofing scanning you should tune this option, see ++.B HPING3-HOWTO + for more information. + .TP + .I --fast +@@ -195,13 +195,13 @@ + startup time and when finished. + .TP + .I -I --interface interface name +-By default on linux and BSD systems hping2 uses default routing interface. ++By default on linux and BSD systems hping3 uses default routing interface. + In other systems or when there is no default route +-hping2 uses the first non-loopback interface. +-However you are able to force hping2 to use the interface you need using ++hping3 uses the first non-loopback interface. ++However you are able to force hping3 to use the interface you need using + this option. Note: you don't need to specify the whole name, for + example -I et will match eth0 ethernet0 myet1 et cetera. If no interfaces +-match hping2 will try to use lo. ++match hping3 will try to use lo. + .TP + .I -V --verbose + Enable verbose output. TCP replies will be shown as follows: +@@ -211,7 +211,7 @@ + .TP + .I -D --debug + Enable debug mode, it's useful when you experience some problem with +-hping2. When debug mode is enabled you will get more information about ++hping3. When debug mode is enabled you will get more information about + .B interface detection, data link layer access, interface settings, options + .B parsing, fragmentation, HCMP protocol + and other stuff. +@@ -223,30 +223,30 @@ + CTRL+Z once or twice. + .TP + .I -Z --unbind +-Unbind CTRL+Z so you will able to stop hping2. ++Unbind CTRL+Z so you will able to stop hping3. + .TP + .I --beep + Beep for every matching received packet (but not for ICMP errors). + .SH PROTOCOL SELECTION +-Default protocol is TCP, by default hping2 will send tcp headers to target ++Default protocol is TCP, by default hping3 will send tcp headers to target + host's port 0 with a winsize of 64 without any tcp flag on. Often this + is the best way to do an 'hide ping', useful when target is behind + a firewall that drop ICMP. Moreover a tcp null-flag to port 0 has a good + probability of not being logged. + .TP + .I -0 --rawip +-RAW IP mode, in this mode hping2 will send IP header with data ++RAW IP mode, in this mode hping3 will send IP header with data + appended with --signature and/or --file, see also --ipproto that + allows you to set the ip protocol field. + .TP + .I -1 --icmp +-ICMP mode, by default hping2 will send ICMP echo-request, you can set ++ICMP mode, by default hping3 will send ICMP echo-request, you can set + other ICMP type/code using + .B --icmptype --icmpcode + options. + .TP + .I -2 --udp +-UDP mode, by default hping2 will send udp to target host's port 0. ++UDP mode, by default hping3 will send udp to target host's port 0. + UDP header tunable options are the following: + .B --baseport, --destport, --keep. + .TP +@@ -288,11 +288,11 @@ + shows interesting details. + .TP + .I -9 --listen signature +-HPING2 listen mode, using this option hping2 waits for packet that contain ++HPING3 listen mode, using this option hping3 waits for packet that contain + .I signature + and dump from + .I signature +-end to packet's end. For example if hping2 --listen TEST reads a packet ++end to packet's end. For example if hping3 --listen TEST reads a packet + that contain + .B 234-09sdflkjs45-TESThello_world + it will display +@@ -304,7 +304,7 @@ + ensures that target will not gain your real address. However replies + will be sent to spoofed address, so you will can't see them. In order + to see how it's possible to perform spoofed/idle scanning see the +-.BR HPING2-HOWTO . ++.BR HPING3-HOWTO . + .TP + .I --rand-source + This option enables the +@@ -347,7 +347,7 @@ + or + .B --bind + options. If in doubt try +-.BR "" "`" "hping2 some.host.com -t 1 --traceroute" "'." ++.BR "" "`" "hping3 some.host.com -t 1 --traceroute" "'." + .TP + .I -N --id + Set ip->id field. Default id is random but if fragmentation is turned on +@@ -361,11 +361,11 @@ + .I -W --winid + id from Windows* systems before Win2k has different byte ordering, if this + option is enable +-hping2 will properly display id replies from those Windows. ++hping3 will properly display id replies from those Windows. + .TP + .I -r --rel + Display id increments instead of id. See the +-.B HPING2-HOWTO ++.B HPING3-HOWTO + for more information. Increments aren't computed as id[N]-id[N-1] but + using packet loss compensation. See relid.c for more information. + .TP +@@ -445,7 +445,7 @@ + .SH TCP/UDP RELATED OPTIONS + .TP + .I -s --baseport source port +-hping2 uses source port in order to guess replies sequence number. It ++hping3 uses source port in order to guess replies sequence number. It + starts with a base source port number, and increase this number for each + packet sent. When packet is received sequence number can be computed as + .IR "replies.dest.port - base.source.port" . +@@ -485,7 +485,7 @@ + by target host. This can be useful when you need to analyze whether + TCP sequence number is predictable. Output example: + +-.B #hping2 win98 --seqnum -p 139 -S -i u1 -I eth0 ++.B #hping3 win98 --seqnum -p 139 -S -i u1 -I eth0 + .nf + HPING uaz (eth0 192.168.4.41): S set, 40 headers + 0 data bytes + 2361294848 +2361294848 +@@ -540,8 +540,8 @@ + .SH COMMON OPTIONS + .TP + .I -d --data data size +-Set packet body size. Warning, using --data 40 hping2 will not generate +-0 byte packets but protocol_header+40 bytes. hping2 will display ++Set packet body size. Warning, using --data 40 hping3 will not generate ++0 byte packets but protocol_header+40 bytes. hping3 will display + packet size information as first line output, like this: + .B HPING www.yahoo.com (ppp0 204.71.200.67): NO FLAGS are set, 40 headers + 40 data bytes + .TP +@@ -577,9 +577,9 @@ + A to host B you may use the following: + .nf + .I [host_a] +-.B # hping2 host_b --udp -p 53 -d 100 --sign signature --safe --file /etc/passwd ++.B # hping3 host_b --udp -p 53 -d 100 --sign signature --safe --file /etc/passwd + .I [host_b] +-.B # hping2 host_a --listen signature --safe --icmp ++.B # hping3 host_a --listen signature --safe --icmp + .fi + .TP + .I -u --end +@@ -587,13 +587,13 @@ + .I --file filename + option, tell you when EOF has been reached. Moreover prevent that other end + accept more packets. Please, for more information see the +-.BR HPING2-HOWTO . ++.BR HPING3-HOWTO . + .TP + .I -T --traceroute +-Traceroute mode. Using this option hping2 will increase ttl for each ++Traceroute mode. Using this option hping3 will increase ttl for each + .B ICMP time to live 0 during transit + received. Try +-.BR "hping2 host --traceroute" . ++.BR "hping3 host --traceroute" . + This option implies --bind and --ttl 1. You can override the ttl of 1 + using the --ttl option. Since 2.0.0 stable it prints RTT information. + .TP +@@ -601,7 +601,7 @@ + Keep the TTL fixed in traceroute mode, so you can monitor just one hop + in the route. For example, to monitor how the 5th hop changes or + how its RTT changes you can try +-.BR "hping2 host --traceroute --ttl 5 --tr-keep-ttl" . ++.BR "hping3 host --traceroute --ttl 5 --tr-keep-ttl" . + .TP + .I --tr-stop + If this option is specified hping will exit once the first packet +--- hping3-3.a2.ds1.orig/main.c ++++ hping3-3.a2.ds1/main.c +@@ -193,8 +193,8 @@ + } + + if (parse_options(argc, argv) == -1) { +- printf("hping2: missing host argument\n" +- "Try `hping2 --help' for more information.\n"); ++ printf("hping3: missing host argument\n" ++ "Try `hping3 --help' for more information.\n"); + exit(1); + } + +@@ -298,7 +298,7 @@ + /* if we are in listemode enter in listenmain() else */ + /* print HPING... bla bla bla and enter in wait_packet() */ + if (opt_listenmode) { +- fprintf(stderr, "hping2 listen mode\n"); ++ fprintf(stderr, "hping3 listen mode\n"); + + /* memory protection */ + if (memlockall() == -1) { +--- hping3-3.a2.ds1.orig/parseoptions.c ++++ hping3-3.a2.ds1/parseoptions.c +@@ -215,12 +215,12 @@ + case AGO_UNKNOWN: + case AGO_REQARG: + case AGO_AMBIG: +- ago_gnu_error("hping", o); +- fprintf(stderr, "Try hping --help\n"); ++ ago_gnu_error("hping3", o); ++ fprintf(stderr, "Try hping3 --help\n"); + exit(1); + case AGO_ALONE: + if (targethost_set == 1) { +- fprintf(stderr, "hping: you must specify only " ++ fprintf(stderr, "hping3: you must specify only " + "one target host at a time\n"); + exit(1); + } else { +--- hping3-3.a2.ds1.orig/usage.c ++++ hping3-3.a2.ds1/usage.c +@@ -16,7 +16,7 @@ + void show_usage(void) + { + printf( +-"usage: hping host [options]\n" ++"usage: hping3 host [options]\n" + " -h --help show this help\n" + " -v --version show version\n" + " -c --count packet count\n" +--- hping3-3.a2.ds1.orig/version.c ++++ hping3-3.a2.ds1/version.c +@@ -18,7 +18,7 @@ + + void show_version(void) + { +- printf("hping version %s (%s)\n", RELEASE_VERSION, RELEASE_DATE); ++ printf("hping3 version %s (%s)\n", RELEASE_VERSION, RELEASE_DATE); + #ifdef USE_TCL + printf("This binary is TCL scripting capable\n"); + #else |