From 2ce37cfc99d6247e63bc3dab352dcaf9e658c554 Mon Sep 17 00:00:00 2001 From: Eric Hameleers Date: Mon, 24 Jan 2022 20:51:09 +0000 Subject: Initial revision --- redis/build/rc.redis | 61 ++++++++++ redis/build/redis.SlackBuild | 275 +++++++++++++++++++++++++++++++++++++++++++ redis/build/redis.logrotate | 9 ++ redis/build/slack-desc | 19 +++ 4 files changed, 364 insertions(+) create mode 100644 redis/build/rc.redis create mode 100755 redis/build/redis.SlackBuild create mode 100644 redis/build/redis.logrotate create mode 100644 redis/build/slack-desc (limited to 'redis') diff --git a/redis/build/rc.redis b/redis/build/rc.redis new file mode 100644 index 00000000..3bf698da --- /dev/null +++ b/redis/build/rc.redis @@ -0,0 +1,61 @@ +#!/bin/bash +# +# Redis startup script for Slackware Linux + +PORT=6379 +SERV=/usr/bin/redis-server +CLI=/usr/bin/redis-cli +PIDFILE=/var/run/redis_${PORT}.pid +CONF=/etc/redis/redis.conf + +redis_start() { + if [ ! -r $CONF ]; then + echo "$CONF does not appear to exist. Abort." + exit 1 + fi + + if [ -s $PIDFILE ]; then + echo "Redis appears to be already running?" + exit 1 + fi + + echo "Starting Redis server..." + $SERV $CONF +} + +redis_stop() { + if [ ! -s $PIDFILE ]; then + echo "$PIDFILE does not exist or is empty." + exit 1 + fi + + PID=$(cat $PIDFILE) + echo -n "Stopping Redis server..." + $CLI -p $PORT shutdown + while [ -d /proc/$PID ]; do + sleep 1 + echo -n "." + done + echo " done" +} + +redis_restart() { + redis_stop + sleep 3 + redis_start +} + +case "$1" in + start) + redis_start + ;; + stop) + redis_stop + ;; + restart) + redis_restart + ;; + *) + echo "Usage: $0 {start|stop|restart}" + exit 1 +esac diff --git a/redis/build/redis.SlackBuild b/redis/build/redis.SlackBuild new file mode 100755 index 00000000..a315968b --- /dev/null +++ b/redis/build/redis.SlackBuild @@ -0,0 +1,275 @@ +#!/bin/sh +# $Id$ +# Copyright 2010 Kuroi Kenshi +# Copyright 2012-2018 Audrius Kaukauskas +# Copyright 2022 Eric Hameleers, Eindhoven, NL +# All rights reserved. +# +# Permission to use, copy, modify, and distribute this software for +# any purpose with or without fee is hereby granted, provided that +# the above copyright notice and this permission notice appear in all +# copies. +# +# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF +# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. +# ----------------------------------------------------------------------------- +# +# Slackware SlackBuild script +# =========================== +# By: Eric Hameleers +# For: redis +# Descr: in-memory key-value store +# URL: https://redis.io/ +# Build needs: +# Needs: +# Changelog: +# 6.2.6-1: 24/jan/2022 by Eric Hameleers +# * Initial build. +# +# Run 'sh redis.SlackBuild' to build a Slackware package. +# The package (.t?z) and .txt file as well as build logs are created in /tmp . +# Install the package using 'installpkg' or 'upgradepkg --install-new'. +# +# ----------------------------------------------------------------------------- + +PRGNAM=redis +VERSION=${VERSION:-6.2.6} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j$(nproc) "} +TAG=${TAG:-alien} + +DOCS="00-RELEASENOTES BUGS CONDUCT CONTRIBUTING COPYING \ + INSTALL MANIFESTO README.md TLS.md" + +# Where do we look for sources? +SRCDIR=$(cd $(dirname $0); pwd) + +# Place to build (TMP) package (PKG) and output (OUTPUT) the program: +TMP=${TMP:-/tmp/build} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.gz" +SRCURL="http://download.redis.io/releases/${PRGNAM}-${VERSION}.tar.gz" + +## +## --- with a little luck, you won't have to edit below this point --- ## +## + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$(uname -m)" in + i?86) ARCH=i586 ;; + arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) ARCH=$(uname -m) ;; + esac + export ARCH +fi +# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX: +case "$ARCH" in + i?86) SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686" + SLKLDFLAGS=""; LIBDIRSUFFIX="" + ;; + x86_64) SLKCFLAGS="-O2 -fPIC" + SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64" + ;; + armv7hl) SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" + SLKLDFLAGS=""; LIBDIRSUFFIX="" + ;; + *) SLKCFLAGS=${SLKCFLAGS:-"-O2"} + SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""} + ;; +esac + +case "$ARCH" in + arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; + *) TARGET=$ARCH-slackware-linux ;; +esac + +# Exit the script on errors: +set -e +trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR +# Catch unitialized variables: +set -u +P1=${1:-1} + +# Save old umask and set to 0022: +_UMASK_=$(umask) +umask 0022 + +# Create working directories: +mkdir -p $OUTPUT # place for the package to be saved +mkdir -p $TMP/tmp-$PRGNAM # location to build the source +mkdir -p $PKG # place for the package to be built +rm -rf $PKG/* # always erase old package's contents +rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build +rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log + # remove old log files + +# Source file availability: +if ! [ -f ${SOURCE} ]; then + echo "Source '$(basename ${SOURCE})' not available yet..." + # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT + [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)" + if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi + if ! [ "x${SRCURL}" == "x" ]; then + echo "Will download file to $(dirname $SOURCE)" + wget --no-check-certificate -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true + if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then + echo "Downloading '$(basename ${SOURCE})' failed... aborting the build." + mv -f "${SOURCE}" "${SOURCE}".FAIL + exit 1 + fi + else + echo "File '$(basename ${SOURCE})' not available... aborting the build." + exit 1 + fi +fi + +if [ "$P1" == "--download" ]; then + echo "Download complete." + exit 0 +fi + +# --- PACKAGE BUILDING --- + +echo "++" +echo "|| $PRGNAM-$VERSION" +echo "++" + +cd $TMP/tmp-$PRGNAM +echo "Extracting the source archive(s) for $PRGNAM..." +tar -xvf ${SOURCE} +cd ${PRGNAM}-${VERSION} + +# This messes with Slackware's CFLAGS: +sed -e "s|-O3||" -i deps/Makefile deps/hiredis/Makefile + +chown -R root:root . +chmod -R u+w,go+r-w,a+rX-st . + +echo Building ... +export LDFLAGS="$SLKLDFLAGS" +export CXXFLAGS="$SLKCFLAGS" +export CFLAGS="$SLKCFLAGS" + +make $NUMJOBS PREFIX=/usr MANDIR=/usr/man 2>&1 | tee $OUTPUT/make-${PRGNAM}.log +make install PREFIX=$PKG/usr MANDIR=$PKG/usr/man DESTDIR=$PKG install \ + 2>&1 | tee $OUTPUT/install-${PRGNAM}.log + +# Add this to the doinst.sh: +mkdir -p $PKG/install +cat <> $PKG/install/doinst.sh +# Handle the incoming configuration files: +config() { + for infile in \$1; do + NEW="\$infile" + OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r \$OLD ]; then + mv \$NEW \$OLD + elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then + # toss the redundant copy + rm \$NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... + done +} + +preserve_perms() { + NEW="\$1" + OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" + if [ -e \$OLD ]; then + cp -a \$OLD \${NEW}.incoming + cat \$NEW > \${NEW}.incoming + mv \${NEW}.incoming \$NEW + fi + config \$NEW +} + +config etc/redis/redis.conf.new +config etc/redis/sentinel.conf.new +config etc/logrotate.d/redis.new +preserve_perms etc/rc.d/rc.redis.new + +# Update rc.local so that Redis daemon will be started on boot: +if ! grep "rc.redis" etc/rc.d/rc.local 1>/dev/null 2>&1 ; then + cat <<_EOM_ >> etc/rc.d/rc.local + +if [ -x /etc/rc.d/rc.redis ]; then + # Start Redis daemon + echo "Starting Redis daemon: /etc/rc.d/rc.redis start" + /etc/rc.d/rc.redis start +fi +_EOM_ +fi + +EOINS + +# Use sample config and set some sane defaults: +install -D -m0644 redis.conf $PKG/etc/redis/redis.conf.new +sed \ + -e 's|^daemonize no|daemonize yes|' \ + -e 's|^dir \.|dir /var/lib/redis|' \ + -e 's|^logfile ""|logfile /var/log/redis/redis.log|' \ + -i $PKG/etc/redis/redis.conf.new +install -D -m 0644 sentinel.conf $PKG/etc/redis/sentinel.conf.new + +# Create data directory: +mkdir -p $PKG/var/lib/redis +chmod 0700 $PKG/var/lib/redis + +# Create log directory: +mkdir -p $PKG/var/log/redis + +# Install init script. +mkdir -p $PKG/etc/rc.d +cat $SRCDIR/rc.redis > $PKG/etc/rc.d/rc.redis.new + +# Install logrotate script. +mkdir -p $PKG/etc/logrotate.d +cat $SRCDIR/redis.logrotate > $PKG/etc/logrotate.d/redis.new + +# Add documentation: +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true +cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild +chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION +find $PKG/usr/doc -type f -exec chmod 644 {} \; + +# Compress the man page(s): +if [ -d $PKG/usr/man ]; then + find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; + for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done +fi + +# Strip binaries (if any): +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +# Add a package description: +mkdir -p $PKG/install +cat $SRCDIR/slack-desc > $PKG/install/slack-desc + +# Build the package: +cd $PKG +makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log +cd $OUTPUT +md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5 +cd - +cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt + +# Restore the original umask: +umask ${_UMASK_} + diff --git a/redis/build/redis.logrotate b/redis/build/redis.logrotate new file mode 100644 index 00000000..12e6ea89 --- /dev/null +++ b/redis/build/redis.logrotate @@ -0,0 +1,9 @@ +/var/log/redis/redis.log { + daily + rotate 7 + copytruncate + delaycompress + compress + notifempty + missingok +} diff --git a/redis/build/slack-desc b/redis/build/slack-desc new file mode 100644 index 00000000..2b966bb3 --- /dev/null +++ b/redis/build/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +redis: redis (in-memory key-value store) +redis: +redis: Redis is an advanced key-value store. It is similar to memcached but +redis: the dataset is not volatile, and values can be strings, exactly like +redis: in memcached, but also lists, sets, and ordered sets. These data +redis: types can be manipulated with atomic operations to push/pop elements, +redis: add/remove elements, perform server side union, intersection, +redis: Records are organized in hash table, B+ tree, or a fixed-length array. +redis: Redis supports different kinds of sorting abilities. +redis: +redis: See also: https://redis.io/ -- cgit v1.2.3-79-gdb01